Landward Distribution of Wave Overtopping for Rubble Mound Breakwaters

DEFF Research Database (Denmark)

Andersen, Thomas Lykke; Burcharth, Hans F.

2006-01-01

Overtopping data from seven model test projects has been analyzed with respect to the landward spatial distribution of the overtopping discharge. In total more than 1000 overtopping tests have been analysed and a formula derived for prediction of the landward distribution of overtopping behind...... rubble mound structures with a super structure. The analysis led to the conclusion that although the overtopping discharge, for identical wave heights, decreases with increasing wave steepness, then the maximum travel distance increases with increasing wave steepness....

Marine Structures with Extreme Overtopping Rates

DEFF Research Database (Denmark)

Kofoed, Jens Peter; Frigaard, Peter

2000-01-01

In design of sea defence structures like seawalls, breakwaters and dikes, one of the main objectives is to minimize or even eliminate wave overtopping. For this reason numerous investigations have been performed over the past many years to determine the amount of overtopping occurring for typical...

Geometry Optimization of an Overtopping Wave Energy Device Implemented into the New Breakwater of the Hanstholm Port Expansion

DEFF Research Database (Denmark)

Margheritini, Lucia; Stratigaki, Vasiliki; Troch, Peter

2012-01-01

breakwater is 1.5 km and the water depth ranges approximately from 8.0 m up to 14 m with localized influences on the wave climate. The study is conducted numerically in order to present the expected power production and overall performance of the SSG breakwater in Hanstholm. The price par kWh is also......The study presented here describes the geometry optimization of the Sea wave Slot cone Generator (SSG) overtopping wave energy converter as part of the feasibility study for the implementation of the device in the development plan of Hanstholm harbour in Denmark. The total length of the new planned...

Wave Overtopping Characteristics of the Wave Dragon

DEFF Research Database (Denmark)

Tedd, James; Kofoed, Jens Peter

Simulation work has been used extensively with the Wave dragon and other overtopping devices to analyse the power production performance of them and to optimise the structural design and the control strategy. A time domain approach to this is well documented in Jakobsen & Frigaard 1999. Using...... measurements taken from the Wave Dragon Nissum Bredning prototype, some of the previous assumptions have been slightly modified and improved upon, so that the simulation method better represents the reality of what is occurring....

Role of beach morphology in wave overtopping hazard assessment

Science.gov (United States)

Phillips, Benjamin; Brown, Jennifer; Bidlot, Jean-Raymond; Plater, Andrew

2017-04-01

Understanding the role of beach morphology in controlling wave overtopping volume will further minimise uncertainties in flood risk assessments at coastal locations defended by engineered structures worldwide. XBeach is used to model wave overtopping volume for a 1:200 yr joint probability distribution of waves and water levels with measured, pre- and post-storm beach profiles. The simulation with measured bathymetry is repeated with and without morphological evolution enabled during the modelled storm event. This research assesses the role of morphology in controlling wave overtopping volumes for hazardous events that meet the typical design level of coastal defence structures. Results show disabling storm-driven morphology under-represents modelled wave overtopping volumes by up to 39% under high Hs conditions, and has a greater impact on the wave overtopping rate than the variability applied within the boundary conditions due to the range of wave-water level combinations that meet the 1:200 yr joint probability criterion. Accounting for morphology in flood modelling is therefore critical for accurately predicting wave overtopping volumes and the resulting flood hazard and to assess economic losses.

Surface stability analysis of dikes subject to overtopping and infiltration

NARCIS (Netherlands)

Karim, U. F.A.; Tran, Q.T.; Meij, R.

2015-01-01

The key contribution of this paper is the coupling of hydraulic loading conditions due to wave overtopping with slope stability of the surface layer of earthen flood protection embankments. Overtopping wave conditions impact overtopping discharges and infiltration time, and thereby the infiltration

Comparison Between Overtopping Discharge in Small and Large Scale Models

DEFF Research Database (Denmark)

Helgason, Einar; Burcharth, Hans F.

2006-01-01

The present paper presents overtopping measurements from small scale model test performed at the Haudraulic & Coastal Engineering Laboratory, Aalborg University, Denmark and large scale model tests performed at the Largde Wave Channel,Hannover, Germany. Comparison between results obtained from...... small and large scale model tests show no clear evidence of scale effects for overtopping above a threshold value. In the large scale model no overtopping was measured for waveheights below Hs = 0.5m as the water sunk into the voids between the stones on the crest. For low overtopping scale effects...

Overtopping And Rear Slope Stabillity Of Reshaping Breakwaters

DEFF Research Database (Denmark)

Burcharth, Hans Falk; Lykke Andersen, Thomas

2003-01-01

An experimental study of overtopping and rear slope stability of reshaping breakwaters has been carried out. The variation of those two parameters with crest width, crest freeboard and sea state was investigated. The tests showed that the variation in overtopping discharge with crest freeboard...

Seawall Overtopping Tests

DEFF Research Database (Denmark)

Frigaard, Peter

At the request of Mr. J. Bulow Beck, Havnecon A/S the Hydraulics Laboratory at University of Aalborg, Denmark carried out model test with the objective of studying the overtopping of a seawall designed for the protection of a new road and promenade, the SOHAR CORNICE, in the Sultanate of Oman...

Overtopping and Rear Slope Stability of Reshaping & Non-reshaping Berm Breakwaters

DEFF Research Database (Denmark)

Andersen, Thomas Lykke; Burcharth, H. F.

2004-01-01

Overtopping and rear slope stability of reshaping and non-reshaping berm breakwaters have been studied in a wave flume. A total of 695 tests have been performed to cover the influence of crest freeboard, crest width, berm width, berm elevation, stone size and sea state. Formula for average...... overtopping discharge that includes these parameters has been derived. The measurements show good correlation between average overtopping discharge and rear slope damage....

[Innovation of characteristic medicinal cupping devices].

Science.gov (United States)

Li, Jianping; Zhang, Hui; Yang, Jianmei; Xu, Xinchun; Niu, Yanxia; Cai, Jun

2015-08-01

To compare the differences in the characteristic medicinal cupping therapy between the traditional cupping device and the innovated cupping device. Fifty patients of neck and low back pain were selected. The self-comparison was adopted. The cupping therapy was applied to the acupoints located on the left or right side with the traditional cupping device and the innovated cupping device. The cupping sites were centered at bilateral Quyuan (SI 13) and Dachangshu (BL 25). The cups were retained for 10 min. The traditional cupping device was the glass with smooth border, 100mL. The innovated cupping device was the vacuum-sucking cup. The operative time, medicinal leakage, comfort and cupping marks were observed for the two different cupping devices. The operative time with the innovated medicinal cupping device was shorter obviously compared with the traditional one at Quyuan (SI 13) and Dachangshu (BL 25, both Pcupping device was remarkably improved as compared with the traditional one at the two acupoints (both Pcupping operation (both P>0. 05). The cupping marks with the innovated medicinal cupping device were much deeper than those with the traditional one after cupping therapy. The innovated cupping device is more convenent and comfortable in operation during the characteristic medicinal cupping therapy.

Marine Structures with Heavy Overtopping

DEFF Research Database (Denmark)

Kofoed, Jens Peter; Frigaard, Peter

2000-01-01

An investigation of wave overtopping of marine structures is described. Focus is put on structures with realtively low crest levels and various slope layouts subjected to non-breaking waves. Influence of slope draught and angle is investigated....

Simulation of Wave Overtopping of Maritime Structures in a Numerical Wave Flume

Directory of Open Access Journals (Sweden)

Tiago C. A. Oliveira

2012-01-01

Full Text Available A numerical wave flume based on the particle finite element method (PFEM is applied to simulate wave overtopping for impermeable maritime structures. An assessment of the performance and robustness of the numerical wave flume is carried out for two different cases comparing numerical results with experimental data. In the first case, a well-defined benchmark test of a simple low-crested structure overtopped by regular nonbreaking waves is presented, tested in the lab, and simulated in the numerical wave flume. In the second case, state-of-the-art physical experiments of a trapezoidal structure placed on a sloping beach overtopped by regular breaking waves are simulated in the numerical wave flume. For both cases, main overtopping events are well detected by the numerical wave flume. However, nonlinear processes controlling the tests proposed, such as nonlinear wave generation, energy losses along the wave propagation track, wave reflection, and overtopping events, are reproduced with more accuracy in the first case. Results indicate that a numerical wave flume based on the PFEM can be applied as an efficient tool to supplement physical models, semiempirical formulations, and other numerical techniques to deal with overtopping of maritime structures.

A Simple model for breach formation by overtopping

Energy Technology Data Exchange (ETDEWEB)

Trousseau, P. [Hydro-Quebec, Montreal, PQ (Canada); Kahawita, R. [Ecole Polytechnique, Montreal, PQ (Canada)

2006-07-01

Failures in earth or rockfill dams are often caused by overtopping of the crest, leading to initiation and uncontrolled progression of a breach. Overtopping may occur because of large inflows into the reservoir caused by excessive rainfall or by the failure of an upstream dam that causes a large volume of water to suddenly arrive at the downstream reservoir thus rapidly exceeding the storage and spillway evacuation capacity. Breach formation in a rockfill or earthfill dike due to overtopping of the crest is a complex process as it involves interaction between the hydraulics of the flow and the erosion characteristics of the fill material. This paper presented a description and validation of a simple parametric model for breach formation due to overtopping. A study was conducted to model, as closely as possible, the physical processes involved within the restriction of the simplified analysis. The objective of the study was to predict the relevant timescales for the phenomenon leading to a prediction of the outflow hydrograph. The model has been validated on the Oros dam failure in Brazil as well as on embankment tests conducted at Rosvatn, Norway. It was concluded that the major impediment to the development of breach erosion models for use as predictive tools is in the characterization of the erosion behaviour. 19 refs., 2 tabs., 9 figs.

Risk analysis for earth dam overtopping

Directory of Open Access Journals (Sweden)

Mo Chongxun

2008-06-01

Full Text Available In this paper, a model of overtopping risk under the joint effects of floods and wind waves, which is based on risk analysis theory and takes into account the uncertainties of floods, wind waves, reservoir capacity and discharge capacity of the spillway, is proposed and applied to the Chengbihe Reservoir in Baise City in Guangxi Zhuang Autonomous Region. The simulated results indicate that the flood control limiting level can be raised by 0.40 m under the condition that the reservoir overtopping risk is controlled within a mean variance of 5×10−6. As a result, the reservoir storage will increase to 16 million m3 and electrical energy generation and other functions of the reservoir will also increase greatly.

Overtopping of Rubble Mound Breakwaters with Front Reservoir

DEFF Research Database (Denmark)

Burcharth, Hans F.; Andersen, Thomas Lykke

2006-01-01

The admissible overtopping discharge is a key parameter in fundamental design of breakwaters. Quite often there is a wish to limit the crest level of the structure, mainly for aesthetic reasons as a high structure might block the sea view from restaurants, promenades etc.......The admissible overtopping discharge is a key parameter in fundamental design of breakwaters. Quite often there is a wish to limit the crest level of the structure, mainly for aesthetic reasons as a high structure might block the sea view from restaurants, promenades etc....

Scale Effects Related to Small Physical Modelling of Overtopping of Rubble Mound Breakwaters

DEFF Research Database (Denmark)

Burcharth, Hans F.; Andersen, Thomas Lykke

2009-01-01

By comparison of overtopping discharges recorded in prototype and small scale physical models it was demonstrated in the EU-CLASH project that small scale tests significantly underestimate smaller discharges. Deviations in overtopping are due to model and scale effects. These effects are discusse...... armour on the upper part of the slope. This effect is believed to be the main reason for the found deviations between overtopping in prototype and small scale tests....

Individual Violent Overtopping Events: New Insights

DEFF Research Database (Denmark)

Jayaratne, R.; Hunt-Raby, A.; Bullock, G. N.

2009-01-01

Wave overtopping is essentially a discrete process in which disastrous consequences can arise from the effect of one or two waves; few of the thousands of previous experiments have focused on the properties of individual events. The violent impacts of water waves on walls create velocities and pr...

Topological Insulators and Superconductors for Innovative Devices

Science.gov (United States)

2015-03-20

Final 3. DATES COVERED (From - To) 20120321 - 20150320 4. TITLE AND SUBTITLE Topological insulators and superconductors for innovative...locking, which hold promise for various innovative devices. Similarly, topological superconductors are associated with exotic surface states, which...298 (Rev. 8/98) Prescribed by ANSI Std. Z39.18 Final Report Title: Topological Insulators and Superconductors for Innovative Devices

Crest Level Optimization of the Multi Level Overtopping based Wave Energy Converter Seawave Slot-Cone Generator

DEFF Research Database (Denmark)

Kofoed, Jens Peter; Osaland, E.

2005-01-01

The paper describes the optimization of the crest levels and geometrical layout of the SSG structure, focusing on maximizing the obtained potential energy in the overtopping water. During wave tank testing at AAU average overtopping rates into the individual reservoirs have been measured. The ini......The paper describes the optimization of the crest levels and geometrical layout of the SSG structure, focusing on maximizing the obtained potential energy in the overtopping water. During wave tank testing at AAU average overtopping rates into the individual reservoirs have been measured....... The initial tests led to an expression describing the derivative of the overtopping rate with respect to the vertical distance. Based on this, numerical optimizations of the crest levels, for a number of combinations of wave conditions, have been performed. The hereby found optimal crest levels have been...

Biomedical device innovation methodology: applications in biophotonics

Science.gov (United States)

Beswick, Daniel M.; Kaushik, Arjun; Beinart, Dylan; McGarry, Sarah; Yew, Ming Khoon; Kennedy, Brendan F.; Maria, Peter Luke Santa

2018-02-01

The process of medical device innovation involves an iterative method that focuses on designing innovative, device-oriented solutions that address unmet clinical needs. This process has been applied to the field of biophotonics with many notable successes. Device innovation begins with identifying an unmet clinical need and evaluating this need through a variety of lenses, including currently existing solutions for the need, stakeholders who are interested in the need, and the market that will support an innovative solution. Only once the clinical need is understood in detail can the invention process begin. The ideation phase often involves multiple levels of brainstorming and prototyping with the aim of addressing technical and clinical questions early and in a cost-efficient manner. Once potential solutions are found, they are tested against a number of known translational factors, including intellectual property, regulatory, and reimbursement landscapes. Only when the solution matches the clinical need, the next phase of building a "to market" strategy should begin. Most aspects of the innovation process can be conducted relatively quickly and without significant capital expense. This white paper focuses on key points of the medical device innovation method and how the field of biophotonics has been applied within this framework to generate clinical and commercial success.

Experimental Overtopping Investigation for the Wave Dragon

DEFF Research Database (Denmark)

Borgarino, Bruno; Kofoed, Jens Peter; Tedd, James

The present report displays the results from overtopping tests carried on the 1:51.8 Wave Dragon model in September 2007. This tests have been carried on by Bruno Borgarino, James Tedd and Jens Peter Kofoed in the wave tank facilities of Aalborg University. The objective was to provide an updated...

76 FR 7220 - Medical Device Innovation Initiative; Request for Comments

Science.gov (United States)

2011-02-09

... medical device innovation. 6. Other actions CDRH should take to facilitate the development, assessment...] Medical Device Innovation Initiative; Request for Comments AGENCY: Food and Drug Administration, HHS... availability of a document for public comment entitled ``Medical Device Innovation Initiative'' (the report...

Uncertainty Analysis and Overtopping Risk Evaluation of Maroon Dam withMonte Carlo and Latin Hypercube Methods

Directory of Open Access Journals (Sweden)

J. M. Vali Samani

2016-02-01

Full Text Available Introduction: The greatest part of constructed dams belongs to embankment dams and there are many examples of their failures throughout history. About one-third of the world’s dam failures have been caused by flood overtopping, which indicates that flood overtopping is an important factor affecting reservoir projects’ safety. Moreover, because of a poor understanding of the randomness of floods, reservoir water levels during flood seasons are often lowered artificially in order to avoid overtopping and protect the lives and property of downstream residents. So, estimation of dam overtopping risk with regard to uncertainties is more important than achieving the dam’s safety. This study presents the procedure for risk evaluation of dam overtopping due to various uncertaintiess in inflows and reservoir initial condition. Materials and Methods: This study aims to present a practical approach and compare the different uncertainty analysis methods in the evaluation of dam overtopping risk due to flood. For this purpose, Monte Carlo simulation and Latin hypercube sampling methods were used to calculate the overtopping risk, evaluate the uncertainty, and calculate the highest water level during different flood events. To assess these methods from a practical point of view, the Maroon dam was chosen for the case study. Figure. 1 indicates the work procedure, including three parts: 1 Identification and evaluation of effective factors on flood routing and dam overtopping, 2 Data collection and analysis for reservoir routing and uncertainty analysis, 3 Uncertainty and risk analysis. Figure 1- Diagram of dam overtopping risk evaluation Results and Discussion: Figure 2 shows the results of the computed overtopping risks for the Maroon Dam without considering the wind effect, for the initial water level of 504 m as an example. As it is shown in Figure. 2, the trends of the risk curves computed by the different uncertainty analysis methods are similar

Recruitment of ichthyoplankton and macrozooplankton during overtopping events into a temporarily open/closed southern African estuary

Science.gov (United States)

Kemp, J. O. G.; Froneman, P. W.

2004-11-01

The composition and short-term temporal variation in the ichthyofauna and macrozooplankton entering the temporarily open/closed (TOC) West Kleinemond estuary (33°33'S, 27°02'E) during 7 overtopping events were investigated in June 2003. A total of 84 fish representing 7 taxa from 6 families and 456 macrozooplankton representing at least 16 species was collected from water overtopping the sandbar using a custom-built funnel trap (150 μm mesh). Larvae of estuarine dependant marine species, especially the sparid, Rhabdosargus holubi, which contributed 54% to the total fish catch, dominated the ichthyofauna. Also well represented among the ichthyofauna were Monodactylus falciformis and Mugilidae spp., which together accounted for a further 40% of the total fish catch. Among the macrozooplankton, larvae of Palaemon peringueyi and the mysid Mesopodopsis wooldridgei dominated numerically and by biomass. Numerical analyses using multidimensional scaling (MDS) revealed variability in the overtopping community on a diel scale. It is suggested that recruitment through overtopping is essentially a passive process governed by the physical environment with the composition of the recruiting community being a function of the patchy dynamics of surf zone plankton. Preliminary estimates indicate that an hour-long period of overtopping over spring high tide is capable of introducing between 8000 and 33 500 individuals of R. holubi into the TOC West Kleinemond estuary. The advantages and disadvantages of recruitment using overtopping events as well as impacts on the estuarine foodweb are discussed.

Turbine Control Strategy using Wave Prediction to Optimise Power Take Off of Overtopping Wave Energy Converters

DEFF Research Database (Denmark)

Tedd, James; Knapp, Wilfried; Frigaard, Peter

2005-01-01

This paper presents the control strategy used on Wave Dragon overtopping wave energy converter. The nature of overtopping requires that for optimum performance the water level in the reservoir must be controlled by controlling the turbine outflows. A history of the simulations performed is included...

Modelling of the Overtopping Flow on the Wave Dragon Wave Energy Converter

DEFF Research Database (Denmark)

Parmeggiani, Stefano; Pecher, Arthur; Kofoed, Jens Peter

2010-01-01

The Wave Dragon is a floating slack-moored Wave Energy Converter of the overtopping type, which is facing now the last phase of development before the commercial exploitation: the deployment of a full-scale demonstrator. In this phase a modelling tool allowing for accurate predictions of the perf......The Wave Dragon is a floating slack-moored Wave Energy Converter of the overtopping type, which is facing now the last phase of development before the commercial exploitation: the deployment of a full-scale demonstrator. In this phase a modelling tool allowing for accurate predictions...

Analysis of Overtopping Flow on Sea Dikes in Oblique and Short-Crested Waves

DEFF Research Database (Denmark)

Nørgaard, Jørgen Harck; Andersen, Thomas Lykke; Burcharth, Hans F.

2013-01-01

-empirical formulae for the estimation of flow depths and flow velocities across a dike. The results have been coupled to the actual erosion of the landward dike slope determined by full-scale 2D tests using the so-called “Overtopping Simulator”. This paper describes the results from 96 small-scale tests carried out...... directions on the dike, and the statistical distribution of individual flow parameters are needed to obtain more realistic estimates of dike erosion caused by wave overtopping....

Wave overtopping erosion tests at Groningen sea dyke

NARCIS (Netherlands)

Verhagen, H.J.; Akkerman, G.J.; van Gerven, K.A.J.; Schaap, H.A.; van der Meer, J.W.

2007-01-01

In the present report field erosion tests of the inner slope of a sea dyke in the province of Groningen (near Delfzijl) are described for the situation of severe wave overtopping. Three types of tests have been performed: tests at the present grass cover, tests at a reinforced grass cover and tests

Overtopping Measurements on the Wave Dragon Nissum Bredning Prototype

DEFF Research Database (Denmark)

Frigaard, Peter; Kofoed, Jens Peter; Rasmussen, Michael R.

2004-01-01

The paper describes the methods used to estimate (calculated from some indirect measurements) the overtopping of the wave energy converter Wave Dragon placed in a real sea environment. The wave energy converter in quistion is the 237-tonne heavy Wave Dragon Nissum Bredning Prototype. Comparisons...

Optimization of Overtopping Wave Energy Converters by Geometry Control

DEFF Research Database (Denmark)

Victor, L.; Troch, P.; Kofoed, Jens Peter

2011-01-01

In this paper, the results of a study on the effects of geometry control on the performance of overtopping wave energy converters with a simple geometry built in coastal structures (simple OWECs) are presented. Empirical formulae, derived based on experimental tests on simple OWECs with varying...

Effects of vertical wall and tetrapod weights on wave overtopping in rubble mound breakwaters under irregular wave conditions

Directory of Open Access Journals (Sweden)

Park Sang Kil

2014-12-01

Full Text Available Rubble mound breakwaters protect the coastal line against severe erosion caused by wave action. This study examined the performance of different sizes and properties (i.e. height of vertical wall and tetrapod size of rubble mound breakwaters on reducing the overtopping discharge. The physical model used in this study was derived based on an actual rubble mound in Busan Yacht Harbor. This research attempts to fill the gap in practical knowledge on the combined effect of the armor roughness and vertical wall on wave overtopping in rubble mound breakwaters. The main governing parameters used in this study were the vertical wall height, variation of the tetrapod weights, initial water level elevation, and the volume of overtopping under constant wave properties. The experimental results showed that the roughness factor differed according to the tetrapod size. Furthermore, the overtopping discharge with no vertical wall was similar to that with relatively short vertical walls ( 1 γv = 1. Therefore, the experimental results highlight the importance of the height of the vertical wall in reducing overtopping discharge. Moreover, a large tetrapod size may allow coastal engineers to choose a shorter vertical wall to save cost, while obtaining better performance.

Effects of vertical wall and tetrapod weights on wave overtopping in rubble mound breakwaters under irregular wave conditions

Directory of Open Access Journals (Sweden)

Sang Kil Park

2014-12-01

Full Text Available Rubble mound breakwaters protect the coastal line against severe erosion caused by wave action. This study examined the performance of different sizes and properties (i.e. height of vertical wall and tetrapod size of rubble mound breakwaters on reducing the overtopping discharge. The physical model used in this study was derived based on an actual rubble mound in Busan Yacht Harbor. This research attempts to fill the gap in practical knowledge on the combined effect of the armor roughness and vertical wall on wave overtopping in rubble mound breakwaters. The main governing parameters used in this study were the vertical wall height, variation of the tetrapod weights, initial water level elevation, and the volume of overtopping under constant wave properties. The experimental results showed that the roughness factor differed according to the tetrapod size. Furthermore, the overtopping discharge with no vertical wall was similar to that with relatively short vertical walls (γν = 1. Therefore, the experimental results highlight the importance of the height of the vertical wall in reducing overtopping discharge. Moreover, a large tetrapod size may allow coastal engineers to choose a shorter vertical wall to save cost, while obtaining better performance.

Overtopping hazards to port activities: Application of a new methodology to risk management (POrt Risk MAnagement Tool)

International Nuclear Information System (INIS)

Alises, Ana; Molina, Rafael; Gómez, Rebeca; Pery, Pascual; Castillo, Carmen

2014-01-01

In the past 20 years, the need of ports to serve a fleet whose dimensions are continuously increasing due to economies of scale, has derived on a port infrastructures growth with a trend to look for greater drafts at deeper waters and therefore the protection structures built in the last years have been increasingly exposed to severer maritime climate action. Consequently, overtopping phenomenon has been identified as a potential risk factor able to cause structural damages and operative failure modes to vulnerable economic activities located at these port facilities. Port activities must be developed ensuring operative and safety conditions what imply reducing uncertainties of overtopping phenomena by using prediction methods which may allow overtopping risk management. This paper provides a risk assessment methodology which is integrated into an overtopping risk management framework to cope with safety problems in port exploitation. Overtopping risk value is measured by combining probability of occurrence of an undesirable event together with its consequences, estimated in terms of costs or delays and given in base of the vulnerability of the affected port system. The development of this methodology is described and finally applied to a real case study what seems to reinforce the validity of the proposed method to overtopping risk assessment. - Highlights: • Infrastructure risk assessment involves both probabilistic and economic techniques. • Risk equation is posed by the combination of probability, vulnerability and cost. • Port infrastructures' vulnerability level depends on climate agents' action. • Economic value of natural hazards consequences is linked with vulnerability level. • Project planning process should be done taking into account the project's risk distribution

An Innovative Way of Utilizing Wave Energy to Counteract Eutrophication and Hypoxia

DEFF Research Database (Denmark)

Margheritini, Lucia; Claeson, Lennart

2011-01-01

One of the most urgent environmental issues in 415 coastal systems worldwide is eutrophication and hypoxia. Cause of eutrophication is the rapid increase in intensive agricultural practices, industrial activities, and population growth which together have increased nitrogen and phosphorus flows...... in the environment. This is a major problem in the Baltic Sea. The present study introduces the Wave-Energized Baltic Aeration Pump (WEBAP). This is one floating overtopping device that uses the collected overtopping water to oxygenate the sea bottom in areas suffering from eutrophication. This is done by using...... the driving head of the overtopping water temporarily stored in the reservoir flowing out through a long vertical pipe leading close to the bottom of the sea. The necessary amounts of oxygen and corresponding overtopping volumes in order to have a positive impact in a damaged environment have been considered...

Turbine Control Strategy using Wave Prediction to Optimise Power Take Off of Overtopping Wave Energy Converters

OpenAIRE

Tedd, James; Knapp, Wilfried; Frigaard, Peter; Kofoed, Jens Peter

2005-01-01

This paper presents the control strategy used on Wave Dragon overtopping wave energy converter. The nature of overtopping requires that for optimum performance the water level in the reservoir must be controlled by controlling the turbine outflows. A history of the simulations performed is included. The concept of including an element of prediction, based on wave records a short distance in front of the Wave Dragon, is introduced. Initial simulations indicate a possibility to increase product...

Model Study of Wave Overtopping of Marine Structure for a Wide Range of Geometric Parameters

DEFF Research Database (Denmark)

Kofoed, Jens Peter

2000-01-01

The objective of the study described in this paper is to enable estimation of wave overtopping rates for slopes/ramps given by a wide range of geometric parameters when subjected to varying wave conditions. To achieve this a great number of model tests are carried out in a wave tank using irregul...... 2-D waves. On the basis of the first part of these tests an exponential overtopping expression for a linear slope, including the effect of limited draught and varying slope angle, is presented. The plans for further tests with other slope geometries are described....

Wave Loadings Acting on an Innovative Breakwater for Energy Production

DEFF Research Database (Denmark)

Vicinanza, Diego; Ciardulli, F.; Buccino, M.

2011-01-01

The paper reports on 2D small scale experiments conducted to investigate wave loadings acting on a pilot project of device for the conversion of wave energy into electricity. The conversion concept is based on the overtopping principle and the structure is worldwide known with the acronym SSG....... The hydraulic model tests have been carried out at the LInC laboratory of the University of Naples Federico II using random waves. Results indicate wave overtopping is able to cause a sudden inversion of vertical force under wave crest, so that it is alternatively upward and downward directed over a short time...

Walden North Dam overtopping : emergency response and rehabilitation

Energy Technology Data Exchange (ETDEWEB)

Dyer, S. [FortisBC Inc., South Slocan, BC (Canada); McCreanor, J. [Acres International Ltd., Calgary, AB (Canada); Cronin, D.L.R.; Daw, D. [Acres International Ltd., Vancouver, BC (Canada)

2004-09-01

This paper described the events that led to the overtopping of the Walden North Dam during a heavy rainfall in June 2002, resulting in a breach around an abutment wall. The dam is part of a run-of-river hydro development on Cayoosh Creek near Lillooet, British Columbia. The Walden North Dam was a low, 46 meter wide concrete dam with a single radial gate. The dam overtopping was attributed to failure of the radial gate hoist. Prior to this event, the dam had been classified by the British Columbia Dam Safety Authorities as a high and then a low consequence category of failure. As facility managers, Aquila Networks Canada Ltd. established an immediate action plan to stabilize the situation and resume normal power production by applying the following priorities: (1) ensure safety of workers and the public, (2) limit further damage to the dam and other facilities, (3) ensure environmental protection, and (4) continue to operate the generation units. Local authorities were informed to evacuate a downstream campsite and environmental agencies were contacted along with safety regulators. Repairs included demolition of the damaged portion of the structure and construction a new two-bay gate/stoplog spillway and bridge. Construction was completed by September 2003 according to the requirements of the Department of Fisheries and Oceans for minimum flow, accurate control of fish flows and environmental monitoring of the stream area. 10 figs.

The future of academic innovation in the field of medical devices: is innovation still possible in orthopedics?

Science.gov (United States)

Courvoisier, Aurélien

2016-09-01

Academic research is essential to bring disruptive innovation on medical devices market because the risk-taking is too high for companies and their investors. Performing clinical trials is essential to technical files but no one wants to accept responsibility for implanted off-label devices. The paper explains the academic process for innovation. We see that academic research depends, at the end, on the motivation of companies to develop a product. The key to innovation stands in the early collaboration between the surgeons, the research teams and the companies in a project. Innovation is a good idea supported by the expertise of the right people at the right moment. In orthopaedics, we need, more than ever, to stay focused on the patient benefits.

Overtopping of Rubble Mound Breakwaters with Front Reservoir

DEFF Research Database (Denmark)

Burcharth, Hans F.; Andersen, Thomas Lykke

2007-01-01

The design and performance of breakwaters with front reservoir are discussed on the basis of physical 2-D model tests with a number of cross sections, in which vertopping discharge and spatial distribution, wave forces on inner parapet walls, and stability of reservoir armour were studied....... The sensitivity of these quantities to the width of the reservoir is discussed. It is demonstrated that front reservoir solutions are more economical than conventional cross section solutions, such as bermed structures and mild slope structures, in cases where low crests and small overtopping discharges...

Comparison of Homogenous and Multi-layered Berm Breakwaters with Respect to Overtopping and Front Slope Stability

DEFF Research Database (Denmark)

Andersen, Thomas Lykke; Skals, K. T.; Burcharth, Hans F.

2009-01-01

A model test study was conducted to study overtopping and front slope stability of homogenous and multi-layered berm breakwaters. The two breakwater types are compared and cons and pros are listed. The study shows that the optimum number of stone classes might be significantly lower than what has...... previously been used in the Icelandic type of berm breakwater because it seems that the number of stone classes in the berm can be reduced from five to two without significantly influencing overtopping and stability performance. Moreover, the new results are compared to the design formulae established...

Developing biomedical devices design, innovation and protection

CERN Document Server

Andreoni, Giuseppe; Colombo, Barbara

2013-01-01

During the past two decades incredible progress has been achieved in the instruments and devices used in the biomedical field. This progress stems from continuous scientific research that has taken advantage of many findings and advances in technology made available by universities and industry. Innovation is the key word, and in this context legal protection and intellectual property rights (IPR) are of crucial importance. This book provides students and practitioners with the fundamentals for designing biomedical devices and explains basic design principles. Furthermore, as an aid to the dev

On the Effects of Geometry Control on the Performance of Overtopping Wave Energy Converters

DEFF Research Database (Denmark)

Victor, Lander; Troch, Peter; Kofoed, Jens Peter

2011-01-01

Overtopping wave energy converters (OWECs) are designed to extract energy from ocean waves based on wave overtopping into a reservoir, which is emptied into the ocean through a set of low-head turbines, and typically feature a low crest freeboard and a smooth impermeable steep slope. In the process...... of optimizing the performance of OWECs, the question arises whether adapting the slope geometry to the variable wave characteristics at the deployment site (i.e., geometry control) can increase the overall hydraulic efficiency and overall hydraulic power compared to a fixed slope geometry. The effect of five...... different geometry control scenarios on the overall hydraulic efficiency and overall hydraulic power of OWECs has been simulated for three possible deployment sites using empirical prediction formulae. The results show that the effect of an adaptive slope angle is relatively small. On the other hand...

Experimental investigation of fluvial dike breaching due to flow overtopping

Science.gov (United States)

El Kadi Abderrezzak, K.; Rifai, I.; Erpicum, S.; Archambeau, P.; Violeau, D.; Pirotton, M.; Dewals, B.

2017-12-01

The failure of fluvial dikes (levees) often leads to devastating floods that cause loss of life and damages to public infrastructure. Overtopping flows have been recognized as one of the most frequent cause of dike erosion and breaching. Fluvial dike breaching is different from frontal dike (embankments) breaching, because of specific geometry and boundary conditions. The current knowledge on the physical processes underpinning fluvial dike failure due to overtopping remains limited. In addition, there is a lack of a continuous monitoring of the 3D breach formation, limiting the analysis of the key mechanisms governing the breach development and the validation of conceptual or physically-based models. Laboratory tests on breach growth in homogeneous, non-cohesive sandy fluvial dikes due to flow overtopping have been performed. Two experimental setups have been constructed, permitting the investigation of various hydraulic and geometric parameters. Each experimental setup includes a main channel, separated from a floodplain by a dike. A rectangular initial notch is cut in the crest to initiate dike breaching. The breach development is monitored continuously using a specific developed laser profilometry technique. The observations have shown that the breach develops in two stages: first the breach deepens and widens with the breach centerline being gradually shifted toward the downstream side of the main channel. This behavior underlines the influence of the flow momentum component parallel to the dike crest. Second, the dike geometry upstream of the breach stops evolving and the breach widening continues only toward the downstream side of the main channel. The breach evolution has been found strongly affected by the flow conditions (i.e. inflow discharge in the main channel, downstream boundary condition) and floodplain confinement. The findings of this work shed light on key mechanisms of fluvial dike breaching, which differ substantially from those of dam

3D Tests on Overtopping for SSG Wave Energy Converter

DEFF Research Database (Denmark)

Margheritini, Lucia; Kofoed, Jens Peter

This report presents the results of the first study based on laboratory tests of the behaviour of the SSG pilot module in 3D wave conditions. This study was recommended already during Phase 2 of the Co-operation agreement between WEVEnergy AS (Norway) and Aalborg University, Department of Civil...... of the individual reservoirs have been measured and the hydraulic efficiency calculated. The results are given in terms of overtopping rates for the 3 reservoirs and hydraulic efficiency....

Value driven innovation in medical device design: a process for balancing stakeholder voices.

Science.gov (United States)

de Ana, F J; Umstead, K A; Phillips, G J; Conner, C P

2013-09-01

The innovation process has often been represented as a linear process which funnels customer needs through various business and process filters. This method may be appropriate for some consumer products, but in the medical device industry there are some inherent limitations to the traditional innovation funnel approach. In the medical device industry, there are a number of stakeholders who need to have their voices heard throughout the innovation process. Each stakeholder has diverse and unique needs relating to the medical device, the needs of one may highly affect the needs of another, and the relationships between stakeholders may be tenuous. This paper describes the application of a spiral innovation process to the development of a medical device which considers three distinct stakeholder voices: the Voice of the Customer, the Voice of the Business and the Voice of the Technology. The process is presented as a case study focusing on the front-end redesign of a class III medical device for an orthopedics company. Starting from project initiation and scope alignment, the process describes four phases, Discover, Envision, Create, and Refine, and concludes with value assessment of the final design features.

Scale Effects Related to Small Physical Modelling of Overtopping of Rubble Mound Breakwaters

DEFF Research Database (Denmark)

Burcharth, Hans F.; Andersen, Thomas Lykke

2007-01-01

to avoid damage to the breakwater itself and to objects located behind the breakwater. Extreme overtopping events result in water and spray thrown over the crest with considerable velocities. These events can be extremely dangerous as people, cars and even trains have been washed into the sea. Buildings...

The Role of Devices in Staging Front End Innovation

DEFF Research Database (Denmark)

Clausen, Christian; Yoshinaka, Yutaka

2009-01-01

and parcel of the innovative process. The paper is grounded empirically in insight derived from industry practices and compares practices to current literature on the manage-ment of innovation, which portray Front End In-novation as a mere process of search and selection of product ideas. The paper examines...... into realisations. Inputs from different knowledge domains must be grappled with, both in terms of needing to be elucidated as well as synthesized, in the engineering design process. The paper argues that the existing research may be seen as a response to perceived difficulties in dealing with uncertain conditions...... or market and technological opportunities in the innovative process. In this respect, models are not neutral but offer certain framings, contribute translations and act as sensemaking devices....

PRE-MARKET CLINICAL EVALUATIONS OF INNOVATIVE HIGH-RISK MEDICAL DEVICES IN EUROPE

DEFF Research Database (Denmark)

Hulstaert, F.; Neyt, M.; Vinck, I.

2012-01-01

data are available? We studied the premarket clinical evaluation of innovative high-risk medical devices in Europe compared with the US, and with medicines, where appropriate. Methods: The literature and regulatory documents were checked. Representatives from industry, Competent Authorities, Notified...... of premarket trials in Europe and number of patients exposed, but failed as this information is not made public. Furthermore, the Helsinki Declaration is not followed with respect to the registration and publication of premarket trials. Conclusions: For innovative high-risk devices, new EU legislation should...

[Hospital-based health technology assessment in France: how to proceed to evaluate innovative medical devices?].

Science.gov (United States)

Martelli, N; van den Brink, H; Denies, F; Dervaux, B; Germe, A F; Prognon, P; Pineau, J

2014-01-01

Innovative medical devices offer solutions to medical problems and greatly improve patients' outcomes. Like National Health Technology Assessment (HTA) agencies, hospitals face numerous requests for innovative and costly medical devices. To help local decision-makers, different approaches of hospital-based HTA (HB-HTA) have been adopted worldwide. The objective of the present paper is to explore HB-HTA models for adopting innovative medical devices in France and elsewhere. Four different models have been conceptualized: "ambassador" model, "mini-HTA" model, "HTA unit" model and "internal committee". Apparently, "HTA unit" and "internal committee" (or a mixture of both models) are the prevailing HB-HTA models in France. Nevertheless, some weaknesses of these models have been pointed out in previous works. Only few examples involving hospital pharmacists have been found abroad, except in France and in Italy. Finally, the harmonization of the assessment of innovative medical devices in France needs a better understanding of HB-HTA practices. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Dynamics of device innovation: implications for assessing value.

Science.gov (United States)

Gelijns, Annetine C; Russo, Mark J; Hong, Kimberly N; Brown, Lawrence D; Ascheim, Deborah D; Moskowitz, Alan J

2013-10-01

In recent years, there has been growing interest in evaluating the health and economic impact of medical devices. Payers increasingly rely on cost-effectiveness analyses in making their coverage decisions, and are adopting value-based purchasing initiatives. These analytic approaches, however, have been shaped heavily by their use in the pharmaceutical realm, and are ill-adapted to the medical device context. This study focuses on the development and evaluation of left ventricular assist devices (LVADs) to highlight the unique challenges involved in the design and conduct of device trials compared with pharmaceuticals. Devices are moving targets characterized by a much higher degree of post-introduction innovation and "learning by using" than pharmaceuticals. The cost effectiveness ratio of left ventricular assist devices for destination therapy, for example, decreased from around $600,000 per life year saved based on results from the pivotal trial to around $100,000 within a relatively short time period. These dynamics pose fundamental challenges to the evaluation enterprise as well as the policy-making world, which this paper addresses.

Study of Dam-break Due to Overtopping of Four Small Dams in the Czech Republic

Directory of Open Access Journals (Sweden)

Zakaraya Alhasan

2015-01-01

Full Text Available Dam-break due to overtopping is one of the most common types of embankment dam failures. During the floods in August 2002 in the Czech Republic, several small dams collapsed due to overtopping. In this paper, an analysis of the dam break process at the Luh, Velký Bělčický, Melín, and Metelský dams breached during the 2002 flood is presented. Comprehensive identification and analysis of the dam shape, properties of dam material and failure scenarios were carried out after the flood event to assemble data for the calibration of a numerical dam break model. A simple one-dimensional mathematical model was proposed for use in dam breach simulation, and a computer code was compiled. The model was calibrated using the field data mentioned above. Comparison of the erodibility parameters gained from the model showed reasonable agreement with the results of other authors.

Hydraulic Performance of Seawave Slot-Cone Generator Pilot Plant at Kvitsøy (Norway)

DEFF Research Database (Denmark)

Margheritini, Lucia; Vicinanza, D.; Kofoed, Jens Peter

This paper presents results on wave overtopping and loading on an innovative caisson breakwater for electricity production.......This paper presents results on wave overtopping and loading on an innovative caisson breakwater for electricity production....

76 FR 7222 - Medical Device Innovation Initiative; Public Meeting; Request for Comments

Science.gov (United States)

2011-02-09

... public meeting will be provided on a space-available basis beginning at 7 a.m. Non-U.S. citizens are... The United States is the global leader in medical device innovation and CDRH is committed to assuring... public health. CDRH is responsible for advancing public health and facilitating innovation to help bring...

Challenges to Value-Enhancing Innovation in Health Care Delivery: Commonalities and Contrasts with Innovation in Drugs and Devices.

Science.gov (United States)

Garber, Steven; Gates, Susan M; Blume-Kohout, Margaret E; Burgdorf, James R; Wu, Helen

2012-01-01

Limiting the growth of health care costs while improving population health is perhaps the most important and difficult challenge facing U.S. health policymakers. The role of innovation in advancing these social goals is controversial, with many seeing innovation as a major cause of cost growth and many others viewing innovation as crucial for improving the quality of care and health outcomes. The authors argue that mitigating the tension between improving health and controlling costs requires more-nuanced perspectives on innovation. More specifically, they argue that policymakers should carefully distinguish between innovative activities that are worth their social costs and activities that are not worth their social costs and try to encourage the former and discourage the latter. The article considers innovation in drugs, devices, and methods of delivering health care, with particular attention to delivery.

An Innovative Flow-Measuring Device: Thermocouple Boundary Layer Rake

Science.gov (United States)

Hwang, Danny P.; Fralick, Gustave C.; Martin, Lisa C.; Wrbanek, John D.; Blaha, Charles A.

2001-01-01

An innovative flow-measuring device, a thermocouple boundary layer rake, was developed. The sensor detects the flow by using a thin-film thermocouple (TC) array to measure the temperature difference across a heater strip. The heater and TC arrays are microfabricated on a constant-thickness quartz strut with low heat conductivity. The device can measure the velocity profile well into the boundary layer, about 65 gm from the surface, which is almost four times closer to the surface than has been possible with the previously used total pressure tube.

Innovative medical devices and hospital decision making: a study comparing the views of hospital pharmacists and physicians.

Science.gov (United States)

Billaux, Mathilde; Borget, Isabelle; Prognon, Patrice; Pineau, Judith; Martelli, Nicolas

2016-06-01

Objectives Many university hospitals have developed local health technology assessment processes to guide informed decisions about new medical devices. However, little is known about stakeholders' perceptions and assessment of innovative devices. Herein, we investigated the perceptions regarding innovative medical devices of their chief users (physicians and surgeons), as well as those of hospital pharmacists, because they are responsible for the purchase and management of sterile medical devices. We noted the evaluation criteria used to assess and select new medical devices and suggestions for improving local health technology assessment processes indicated by the interviewees. Methods We randomly selected 18 physicians and surgeons (nine each) and 18 hospital pharmacists from 18 French university hospitals. Semistructured interviews were conducted between October 2012 and August 2013. Responses were coded separately by two researchers. Results Physicians and surgeons frequently described innovative medical devices as 'new', 'safe' and 'effective', whereas hospital pharmacists focused more on economic considerations and considered real innovative devices to be those for which no equivalent could be found on the market. No significant difference in evaluation criteria was found between these groups of professionals. Finally, hospital pharmacists considered the management of conflicts of interests in local health technology assessment processes to be an issue, whereas physicians and surgeons did not. Conclusions The present study highlights differences in perceptions related to professional affiliation. The findings suggest several ways in which current practices for local health technology assessment in French university hospitals could be improved and studied. What is known about the topic? Hospitals are faced with ever-growing demands for innovative and costly medical devices. To help hospital management deal with technology acquisition issues, hospital

Use of Physics Innovative Device for Improving Students‟ Motivation and Performance in Learning Selected Concepts in Physics

Directory of Open Access Journals (Sweden)

Virginia Songalia Sobremisana

2017-11-01

Full Text Available This research was focused on the development and evaluation of physics innovative device in enhancing students’ motivation and performance in learning selected concepts in physics. The Physics innovative device was developed based upon research on student difficulties in learning relevant concepts in physics and their attitudes toward the subject. Basic concepts in mechanics were also made as baselines in the development of the locally-produced Physics innovative learning device. Such learning devices are valuable resources when used either in lecture or demonstration classes. The developmental, descriptive and quasi-experimental research methods were utilized to determine the effectiveness, in terms of motivation and performance, of the innovative device in Physics. The instruments used for the data collection were the Instructional Materials Motivational Scale (IMMS developed by Keller and the students’ performance test. Pretest and posttest mean scores were measured to determine if there is a mean gain score difference between the experimental and control groups. The study revealed that the group taught with the Physics innovative device performed significantly better than those taught in the traditional method and also the use of Physics innovative device generally improved students’ understanding of concepts and led to higher academic achievements. Analysis of the students’ level of motivation showed that their interests were captured, the instructions they received were relevant to their personal goals and motives, their confidence to learn on their own were build-up, and learning for them was rewarding and important. In the four dimensions (ARCS of IMMS students were found to be attentive, confident, and in agreement in using the fun-learning tool having realize its applicability and relevance in learning their Physics lessons. Results of the study disclosed students and teachers consider the novel device acceptable because it is

MO-A-BRC-00: TG167: Clinical Recommendations for Innovative Brachytherapy Devices and Applicators

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-06-15

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1) dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of

MO-A-BRC-00: TG167: Clinical Recommendations for Innovative Brachytherapy Devices and Applicators

International Nuclear Information System (INIS)

2016-01-01

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1) dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of

Development of a Generic Power Simulation Tool for Overtopping Based WEC

DEFF Research Database (Denmark)

Bogarino, Bruno; Kofoed, Jens Peter; Meinert, Palle

The overtopping based wave energy converters work by collecting the water from waves in one or more reservoirs above the mean sea water level. The water is then evacuated through one or several turbines and thereby produces electrical energy. As the waves in real sea have a stochastic variation...... in wave height and period, it is very difficult to predict how much water the next wave will bring. Thus, for a given wave state, an optimum turbine operating strategy must be found, minimising the sum of head and spilling losses over a certain period of time. This can only be done by modelling...

Wave Overtopping over Crown Walls and Run-up on Rubble Mound Breakwaters with Kolos Armour under Random Waves

Directory of Open Access Journals (Sweden)

A. Arunjith

2013-06-01

Full Text Available The design of rubble mound structures like breakwaters and seawalls are influenced by the wave run-up and overtopping over them. The above phenomena largely depend on the type of the armour units as they directly interact with the incident waves. The hydrodynamic characteristics of various concrete armour units have been established by several researchers. A new armour block, ‘Kolos’, a modified version of Dolos, is considered in this study for a detailed investigation. An attempt is made to establish empirical relationships for the estimation of wave overtopping discharges over crown wall and run-up on Kolosarmoured slope exposed to random wave from the results of a comprehensive experimental program. Further, the results are compared with that of a tested section with natural rocks as armour layer and with that of other investigators.

Preliminary results on an innovative plasmonic device for macromolecules analysis and sequencing

KAUST Repository

Francardi, Marco; Candeloro, Patrizio; Malara, Natalia Maria; Gentile, Francesco T.; Coluccio, Maria Laura; Perozziello, Gerardo; Gaggero, Aleesandro; De Angelis, Francesco De; Cherubini, Enrico; Di Fabrizio, Enzo M.

2013-01-01

In this work we present the fabrication and theoretical simulation for a new device constituted by a on Substrate Plasmonic Antenna (SPA) combined with a bio-functionalized Atomic Force Microscopy (AFM) cantilever. This device could represent a new strategy to sequence and analyze a single protein or DNA. The idea is to use an SPA composed of an innovative "wedding cake"shaped grating (WCG), in order to excite a Surface Plasmon Polariton (SPP) mode, and a 30-tilted Plasmonic Antenna (PA), able to compress adiabatically the SPP until the tip. The Plasmonic device is placed inside an electrical contact that could be used to unfold protein molecules or DNA. A bio-functionalized AFM tip can be used to fish a single biological element and for alignment with the SPA. Then the unfolded element could be scanned close to the PA and a Tip Enhanced Raman Signal (TERS) can be recorded from the biomolecule. The spatial resolution is limited by the size of the radius of curvature of the antenna, which in this work is about 15 nm, while the vertical scanning is controlled by the piezoelectric of the AFM set up. In this work we demonstrate the possibility to fabricate this innovative plasmonic device and we report FDTD simulations of the innovative WCG. The FDTD simulations show the generation of a plasmonic mode that, coupled with the antenna, give rise to an adiabatic compression which produce an increase of the electric field of about 40 times. © 2013 Elsevier B.V. All rights reserved.

Preliminary results on an innovative plasmonic device for macromolecules analysis and sequencing

KAUST Repository

Francardi, Marco

2013-11-01

In this work we present the fabrication and theoretical simulation for a new device constituted by a on Substrate Plasmonic Antenna (SPA) combined with a bio-functionalized Atomic Force Microscopy (AFM) cantilever. This device could represent a new strategy to sequence and analyze a single protein or DNA. The idea is to use an SPA composed of an innovative "wedding cake"shaped grating (WCG), in order to excite a Surface Plasmon Polariton (SPP) mode, and a 30-tilted Plasmonic Antenna (PA), able to compress adiabatically the SPP until the tip. The Plasmonic device is placed inside an electrical contact that could be used to unfold protein molecules or DNA. A bio-functionalized AFM tip can be used to fish a single biological element and for alignment with the SPA. Then the unfolded element could be scanned close to the PA and a Tip Enhanced Raman Signal (TERS) can be recorded from the biomolecule. The spatial resolution is limited by the size of the radius of curvature of the antenna, which in this work is about 15 nm, while the vertical scanning is controlled by the piezoelectric of the AFM set up. In this work we demonstrate the possibility to fabricate this innovative plasmonic device and we report FDTD simulations of the innovative WCG. The FDTD simulations show the generation of a plasmonic mode that, coupled with the antenna, give rise to an adiabatic compression which produce an increase of the electric field of about 40 times. © 2013 Elsevier B.V. All rights reserved.

Innovation of High Voltage Supply Adjustment Device on Diagnostic X-Ray Machine

International Nuclear Information System (INIS)

Sujatno; Wiranto Budi Santoso

2010-01-01

Innovation of high voltage supply adjustment device on diagnostic x-ray machine has been carried out. The innovation is conducted by utilizing an electronic circuit as a high voltage adjustment device. Usually a diagnostic x-ray machine utilizes a transformer or an auto-transformer as a high voltage supply adjustment device. A high power diagnostic x-ray machine needs a high power transformer which has big physical dimension. Therefore a box control where the transformer is located has to have big physical dimension. Besides, the price of the transformer is expensive and hardly found in local markets. In this innovation, the transformer is replaced by an electronic circuit. The main component of the electronic circuit is Triac BTA-40. As adjustment device, the triac is controlled by a variable resistor which is coupled by a stepper motor. A step movement of stepper motor varies a value of resistor. The resistor value determines the triac gate voltage. Furthermore the triac will open according to the value of electrical current flowing to the gate. When the gate is open, electrical voltage and current will flow from cathode to anode of the triac. The value of these electrical voltage and current depend on gate open condition. Then this triac output voltage is feed to diagnostic x-ray machine high voltage supply. Therefore the high voltage value of diagnostic x-ray machine is adjusted by the output voltage of the electronic circuit. By using this electronic circuit, the physical dimension of diagnostic x-ray machine box control and the price of the equipment can be reduced. (author)

Special funding schemes for innovative medical devices in French hospitals: the pros and cons of two different approaches.

Science.gov (United States)

Martelli, Nicolas; van den Brink, Hélène

2014-07-01

Financing innovative medical devices is an important challenge for national health policy makers, and a crucial issue for hospitals. However, when innovative medical devices are launched on the European market there is generally little clinical evidence regarding both efficacy and safety, both because of the flaws in the European system for regulating such devices, and because they are at an early stage of development. To manage the uncertainty surrounding the reimbursement of innovation, several European countries have set up temporary funding schemes to generate evidence about the effectiveness of devices. This article explores two different French approaches to funding innovative in-hospital devices and collecting supplementary data: the coverage with evidence development (CED) scheme introduced under Article L. 165-1-1 of the French Social Security Code; and national programs for hospital-based research. We discuss pros and cons of both approaches in the light of CED policies in Germany and the UK. The CED policies for devices share common limitations. Thus, transparency of CED processes should be enhanced and decisions need to be made in a timely way. Finally, we think that closer collaboration between manufacturers, health authorities and hospitals is essential to make CED policies more operational. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Placing a price on medical device innovation: the example of total knee arthroplasty.

Directory of Open Access Journals (Sweden)

Lisa G Suter

Full Text Available BACKGROUND: Total knee arthroplasty (TKA is common, effective, and cost-effective. Innovative implants promising reduced long-term failure at increased cost are under continual development. We sought to define the implant cost and performance thresholds under which innovative TKA implants are cost-effective. METHODS: We performed a cost-effectiveness analysis using a validated, published computer simulation model of knee osteoarthritis. Model inputs were derived using published literature, Medicare claims, and National Health and Nutrition Examination Survey data. We compared projected TKA implant survival, quality-adjusted life expectancy (QALE, lifetime costs, and cost-effectiveness (incremental cost-effectiveness ratios or ICERs of standard versus innovative TKA implants. We assumed innovative implants offered 5-70% decreased long-term TKA failure rates at costs 20-400% increased above standard implants. We examined the impact of patient age, comorbidity, and potential increases in short-term failure on innovative implant cost-effectiveness. RESULTS: Implants offering ≥50% decrease in long-term TKA failure at ≤50% increased cost offered ICERs <$100,000 regardless of age or baseline comorbidity. An implant offering a 20% decrease in long-term failure at 50% increased cost provided ICERs <$150,000 per QALY gained only among healthy 50-59-year-olds. Increasing short-term failure, consistent with recent device failures, reduced cost-effectiveness across all groups. Increasing the baseline likelihood of long-term TKA failure among younger, healthier and more active individuals further enhanced innovative implant cost-effectiveness among younger patients. CONCLUSIONS: Innovative implants must decrease actual TKA failure, not just radiographic wear, by 50-55% or more over standard implants to be broadly cost-effective. Comorbidity and remaining life span significantly affect innovative implant cost-effectiveness and should be considered in the

Pre-market clinical evaluations of innovative high-risk medical devices in Europe.

Science.gov (United States)

Hulstaert, Frank; Neyt, Mattias; Vinck, Imgard; Stordeur, Sabine; Huić, Mirjana; Sauerland, Stefan; Kuijpers, Marja R; Abrishami, Payam; Vondeling, Hindrik; Flamion, Bruno; Garattini, Silvio; Pavlovic, Mira; van Brabandt, Hans

2012-07-01

High-quality clinical evidence is most often lacking when novel high-risk devices enter the European market. At the same time, a randomized controlled trial (RCT) is often initiated as a requirement for obtaining market access in the US. Should coverage in Europe be postponed until RCT data are available? We studied the premarket clinical evaluation of innovative high-risk medical devices in Europe compared with the US, and with medicines, where appropriate. The literature and regulatory documents were checked. Representatives from industry, Competent Authorities, Notified Bodies, Ethics Committees, and HTA agencies were consulted. We also discuss patient safety and the transparency of information. In contrast to the US, there is no requirement in Europe to demonstrate the clinical efficacy of high-risk devices in the premarket phase. Patients in Europe can thus have earlier access to a potentially lifesaving device, but at the risk of insufficiently documented efficacy and safety. Variations in the stringency of clinical reviews, both at the level of Notified Bodies and Competent Authorities, do not guarantee patient safety. We tried to document the design of premarket trials in Europe and number of patients exposed, but failed as this information is not made public. Furthermore, the Helsinki Declaration is not followed with respect to the registration and publication of premarket trials. For innovative high-risk devices, new EU legislation should require the premarket demonstration of clinical efficacy and safety, using an RCT if possible, and a transparent clinical review, preferably centralized.

Topological interface states and effects for next generation of innovative devices

International Nuclear Information System (INIS)

Kantser, Valeriu; Carlig, Sergiu

2013-01-01

Topological insulators (TI) have opened a gateway to search new quantum electronic phase of the condensed matter as well as to pave new platform of modern technology. This stems mainly on their unique surface states that are protected by time-reversal symmetry, show the Dirac cones connecting the inverted conduction and valence bands and exhibit unique spin-momentum locking property. Increasing the surface state contribution in proportion to the bulk of material is critical to investigate the surface states and for future innovative device applications. The way to achieve this is to configure topological insulators into nanostructures, which at the same time in combination with others materials significantly enlarge the variety of new states and phenomena. This article reviews the recent progress made in topological insulator nano heterostructures electronic states investigation. The state of art of different new scenario of engineering topologically interface states in the TI heterostructures are revealed, in particular by using polarization fields and antiferromagnetic ordering. Some of new proposals for innovative electronic devices are discussed. (authors)

Integrating mobile devices into nursing curricula: opportunities for implementation using Rogers' Diffusion of Innovation model.

Science.gov (United States)

Doyle, Glynda J; Garrett, Bernie; Currie, Leanne M

2014-05-01

To identify studies reporting mobile device integration into undergraduate and graduate nursing curricula. To explore the potential use of Rogers' Diffusion of Innovation model as a framework to guide implementation of mobile devices into nursing curricula. Literature review and thematic categorization. Literature published up until June 2013 was searched using EBSCO, PubMed, and Google Scholar. The literature was reviewed for research articles pertaining to mobile device use in nursing education. Research articles were grouped by study design, and articles were classified by: 1) strategies for individual adopters and 2) strategies for organizations. Rogers' Diffusion of Innovation theory was used to categorize reported implementation strategies. Fifty-two research studies were identified. Strategies for implementation were varied, and challenges to integrating mobile devices include lack of administrative support and time/funding to educate faculty as well as students. Overall, the use of mobile devices appears to provide benefits to nursing students; however the research evidence is limited. Anticipating challenges and ensuring a well laid out strategic plan can assist in supporting successful integration of mobile devices. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Innovative energy absorbing devices based on composite tubes

Science.gov (United States)

Tiwari, Chandrashekhar

Analytical and experimental study of innovative load limiting and energy absorbing devices are presented here. The devices are based on composite tubes and can be categorized in to two groups based upon the energy absorbing mechanisms exhibited by them, namely: foam crushing and foam fracturing. The device based on foam crushing as the energy absorbing mechanism is composed of light weight elastic-plastic foam filling inside an angle ply composite tube. The tube is tailored to have a high Poisson’s ratio (>20). Upon being loaded the device experiences large transverse contraction resulting in rapid decrease in diameter. At a certain axial load the foam core begins to crush and energy is dissipated. This device is termed as crush tube device. The device based upon foam shear fracture as the energy absorbing mechanism involves an elastic-plastic core foam in annulus of two concentric extension-twist coupled composite tubes with opposite angles of fibers. The core foam is bonded to the inner and outer tube walls. Upon being loaded axially, the tubes twist in opposite directions and fracture the core foam in out of plane shear and thus dissipate the energy stored. The device is termed as sandwich core device (SCD). The devices exhibit variations in force-displacement characteristics with changes in design and material parameters, resulting in wide range of energy absorption capabilities. A flexible matrix composite system was selected, which was composed of high stiffness carbon fibers as reinforcements in relatively low stiffness polyurethane matrix, based upon large strain to failure capabilities and large beneficial elastic couplings. Linear and non-linear analytical models were developed encapsulating large deformation theory of the laminated composite shells (using non-linear strain energy formulation) to the fracture mechanics of core foam and elastic-plastic deformation theory of the foam filling. The non-linear model is capable of including material and

Development of an innovative device for ultrasonic elliptical vibration cutting.

Science.gov (United States)

Zhou, Ming; Hu, Linhua

2015-07-01

An innovative ultrasonic elliptical vibration cutting (UEVC) device with 1st resonant mode of longitudinal vibration and 3rd resonant mode of bending vibration was proposed in this paper, which can deliver higher output power compared to previous UEVC devices. Using finite element method (FEM), resonance frequencies of the longitudinal and bending vibrations were tuned to be as close as possible in order to excite these two vibrations using two-phase driving voltages at a single frequency, while wave nodes of the longitudinal and bending vibrations were also adjusted to be as coincident as possible for mounting the device at a single fixed point. Based on the simulation analysis results a prototype device was fabricated, then its vibration characteristics were evaluated by an impedance analyzer and a laser displacement sensor. With two-phase sinusoidal driving voltages both of 480 V(p-p) at an ultrasonic frequency of 20.1 kHz, the developed prototype device achieved an elliptical vibration with a longitudinal amplitude of 8.9 μm and a bending amplitude of 11.3 μm. The performance of the developed UEVC device is assessed by the cutting tests of hardened steel using single crystal diamond tools. Experimental results indicate that compared to ordinary cutting process, the tool wear is reduced significantly by using the proposed device. Copyright © 2015 Elsevier B.V. All rights reserved.

Managing Innovation Probabilities: Core-driven vs. Bottleneck-removing Innovations

OpenAIRE

Tsutomu Harada

2015-01-01

This paper provides a simplified framework of focusing devices that generate different patterns of innovation, i.e., core-driven and bottleneck-removing innovations, and discusses the managerial implications. We show that core-driven innovation should be undertaken when technology components are independent (independent technology system), while bottleneck-removing innovation should be pursued when they are interdependent (interdependent technology system). Different types of focusing device ...

CSIR research, development and innovation initiatives for the medical device and diagnostic industry

CSIR Research Space (South Africa)

Vilakazi, Busisiwe

2017-10-01

Full Text Available This presentation is focused on development and innovation initiatives in the medical device and diagnostic industry. It is presented by Dr Busisiwe Vilakasi at The 6th CSIR Conference: Ideas that work for industrial development, 5-6 October 2017...

Open Innovation in Practice: Goal Complementarity and Closed NPD Networks to Explain Differences in Innovation Performance for SMEs in the Medical Devices Sector

NARCIS (Netherlands)

Pullen, A.J.J.; de Weerd-Nederhof, Petronella C.; Groen, Arend J.; Fisscher, O.A.M.

2012-01-01

Cooperation with other organizations increases the innovation performance of organization, especially for small and medium-sized enterprises (SMEs) as they encounter liabilities of “smallness” (e.g., limited financial resources, and manpower). In the medical devices sector, collaboration with

基于不确定时间区间TBN的洪水漫坝风险分析%Risk Analysis of Flood Overtopping Based on Uncertain Time Interval TBN

Institute of Scientific and Technical Information of China (English)

涂传飞; 王剑; 王红卫

2013-01-01

In the process of flood overtopping,the uncertainty of events' duration time caused by state uncertainty of natural conditions,dam and emergency measures,and the effect of emergency measures are both key factors that affect the flood overtopping risk.The traditional time interval was transformed into an uncertain time interval and an uncertain time interval Temporal Bayesian Network (TBN) was proposed.After that,a new inferring algorithm of the TBN was discussed.On the basis,flood overtopping risk analysis model,in which emergency measures were considered,was established.Finally,the simulation result shows that the model can accumulate information,judge the importance of each emergency measure,express the state uncertainty and time uncertainty which both exist in the process of flood overtopping and accordingly increase the accuracy of flood overtopping risk analysis.%洪水漫坝过程中,自然条件、坝体及应急处置等状态的不确定性所导致的事件持续时间的不确定性,以及应急处置措施的效果是影响漫坝风险的关键因素.首先将传统时间区间改造为不确定时间区间,提出了一种不确定时间区间时间贝叶斯网络(TBN),并推导了该TBN的推理算法.在此基础上构建了考虑应急处置措施的洪水漫坝风险分析模型.仿真结果表明该模型具有信息时间累积能力,能判断各应急处置措施的重要程度,表达了洪水漫坝过程中同时存在的状态不确定性和时间不确定性,提高了漫坝风险分析的精度.

How do medical device manufacturers' websites frame the value of health innovation? An empirical ethics analysis of five Canadian innovations.

Science.gov (United States)

Lehoux, P; Hivon, M; Williams-Jones, B; Miller, F A; Urbach, D R

2012-02-01

While every health care system stakeholder would seem to be concerned with obtaining the greatest value from a given technology, there is often a disconnect in the perception of value between a technology's promoters and those responsible for the ultimate decision as to whether or not to pay for it. Adopting an empirical ethics approach, this paper examines how five Canadian medical device manufacturers, via their websites, frame the corporate "value proposition" of their innovation and seek to respond to what they consider the key expectations of their customers. Our analysis shows that the manufacturers' framing strategies combine claims that relate to valuable socio-technical goals and features such as prevention, efficiency, sense of security, real-time feedback, ease of use and flexibility, all elements that likely resonate with a large spectrum of health care system stakeholders. The websites do not describe, however, how the innovations may impact health care delivery and tend to obfuscate the decisional trade-offs these innovations represent from a health care system perspective. Such framing strategies, we argue, tend to bolster physicians' and patients' expectations and provide a large set of stakeholders with powerful rhetorical tools that may influence the health policy arena. Because these strategies are difficult to counter given the paucity of evidence and its limited use in policymaking, establishing sound collective health care priorities will require solid critiques of how certain kinds of medical devices may provide a better (i.e., more valuable) response to health care needs when compared to others.

Conceptual Design of Wave Plane

DEFF Research Database (Denmark)

Frigaard, Peter; Trewers, Andrew; Kofoed, Jens Peter

The Wave Plane is a patented Wave Energy device of the overtopping type, designed to capture potential as well as kinetic energy. This is as such different to other overtopping devices, who usually only focus on potential energy. If Wave Plane A/S can deliver the turbine technology to utilize both...

Wave Overtopping over Crown Walls and Run-up on Rubble Mound Breakwaters with Kolos Armour under Random Waves

OpenAIRE

A. Arunjith; S.A. Sannasiraj; V. Sundar

2013-01-01

The design of rubble mound structures like breakwaters and seawalls are influenced by the wave run-up and overtopping over them. The above phenomena largely depend on the type of the armour units as they directly interact with the incident waves. The hydrodynamic characteristics of various concrete armour units have been established by several researchers. A new armour block, ‘Kolos’, a modified version of Dolos, is considered in this study for a detailed investigation. An attempt is made to ...

Medical Device Innovation in the Era of the Affordable Care Act: The End of Sexy.

Science.gov (United States)

Mattke, Soeren; Liu, Hangsheng; Orr, Patrick

2016-06-20

In this article, the authors explore why medical device innovation has traditionally been geared so thoroughly toward improving performance, with little regard to cost. They argue that the changing incentives in the health care sector and the move to value-based payment models, accelerated by the implementation of the Affordable Care Act, will force device manufacturers to redirect investments from the spectacular toward the prudent, which they dub "the end of sexy." The authors explore consequences for manufacturers, investors, and policymakers.

High-resolution marine flood modelling coupling overflow and overtopping processes: framing the hazard based on historical and statistical approaches

Science.gov (United States)

Nicolae Lerma, Alexandre; Bulteau, Thomas; Elineau, Sylvain; Paris, François; Durand, Paul; Anselme, Brice; Pedreros, Rodrigo

2018-01-01

A modelling chain was implemented in order to propose a realistic appraisal of the risk in coastal areas affected by overflowing as well as overtopping processes. Simulations are performed through a nested downscaling strategy from regional to local scale at high spatial resolution with explicit buildings, urban structures such as sea front walls and hydraulic structures liable to affect the propagation of water in urban areas. Validation of the model performance is based on hard and soft available data analysis and conversion of qualitative to quantitative information to reconstruct the area affected by flooding and the succession of events during two recent storms. Two joint probability approaches (joint exceedance contour and environmental contour) are used to define 100-year offshore conditions scenarios and to investigate the flood response to each scenario in terms of (1) maximum spatial extent of flooded areas, (2) volumes of water propagation inland and (3) water level in flooded areas. Scenarios of sea level rise are also considered in order to evaluate the potential hazard evolution. Our simulations show that for a maximising 100-year hazard scenario, for the municipality as a whole, 38 % of the affected zones are prone to overflow flooding and 62 % to flooding by propagation of overtopping water volume along the seafront. Results also reveal that for the two kinds of statistic scenarios a difference of about 5 % in the forcing conditions (water level, wave height and period) can produce significant differences in terms of flooding like +13.5 % of water volumes propagating inland or +11.3 % of affected surfaces. In some areas, flood response appears to be very sensitive to the chosen scenario with differences of 0.3 to 0.5 m in water level. The developed approach enables one to frame the 100-year hazard and to characterize spatially the robustness or the uncertainty over the results. Considering a 100-year scenario with mean sea level rise (0.6 m), hazard

Prediction of the Individual Wave Overtopping Volumes of a Wave Energy Converter using Experimental Testing and First Numerical Model Results

DEFF Research Database (Denmark)

Victor, L.; Troch, P.; Kofoed, Jens Peter

2009-01-01

For overtopping wave energy converters (WECs) a more efficient energy conversion can be achieved when the volumes of water, wave by wave, that enter their reservoir are known and can be predicted. A numerical tool is being developed using a commercial CFD-solver to study and optimize...... nearshore 2Dstructure. First numerical model results are given for a specific test with regular waves, and are compared with the corresponding experimental results in this paper....

Innovative wave energy device applied to coastal observatory systems

Science.gov (United States)

Marcelli, Marco; Bonamano, Simone; Piermattei, Viviana; Scanu, Sergio; Paladini de Mendoza, Francesco; Martellucci, Riccardo; Maximo, Peviani

2017-04-01

Marine environment is one of the most promising sources of renewable energy, whose exploitation could have an effect on several application fields. This work presents the design of an innovative device based on the Oscillating Water Column (OWC), that allows to convert wave energy into electricity, suitable for the typical Mediterranean wave climate. The flexibility of the device permits its installation either in deep or shallow waters, with reduced costs of deployment, maintenance and connection to the grid. Furthermore, the replicability of the design allows the device to be installed in array of several number of similar units. The technical concept is to convey the sea water within a vertical pipe, in which the water movements activate a rotor connected to a generator that transforms the energy of the water motion into electricity. The hydrodynamic design of the pipe is built to minimize the losses due to friction and turbulence and to exploit the maximum possible energy from wave motion. The wave energy is directly absorbed by the rotational movement of the turbine blades located in the water itself allowing a further reduction of the energy losses associated with the transformation of the linear water motion into electrical generation in the air phase (typical configuration of the OWC devices). In this work the device components are described considering two possible configurations that use a Wells turbine or a Bulb type turbine. The system can be realized at a low cost, because of the modularity of the device project, which allows large freedom of sizes and placements, being able to be installed both individually and in arrays. The modularity, associated with the fact that the main elements of the system are available on the market, makes the device particularly attractive from the economic point of view. Finally, it is realized with a high constructive flexibility: the proposed system can be transported floating and moored to existing coastal structures or

HOSPITAL-BASED HEALTH TECHNOLOGY ASSESSMENT FOR THE ADOPTION OF INNOVATIVE MEDICAL DEVICES WITHIN FRENCH HOSPITALS: OPPORTUNITIES AND CHALLENGES FOR INDUSTRY.

Science.gov (United States)

Dutot, Camille; Mercier, Grégoire; Borget, Isabelle; de Sauvebeuf, Côme; Martelli, Nicolas

2017-01-01

Within French university hospitals, some internal committees are in charge of conducting hospital-based health technology assessment (Hb-HTA) to support managerial decisions regarding the adoption of innovations. For manufacturers, hospitals are usually the entry point for new and innovative medical devices, which cannot be accessed without the Hb-HTA committees' approval. Thus, the main objective of this pilot survey was to explore manufacturers' insights into Hb-HTA processes. A two-step pilot survey was conducted in 2014. First, semi-structured phone interviews were carried out to capture manufacturers' feedback on the Hb-HTA procedure. Second, a prospective and iterative questionnaire designed to explore manufacturers' market access strategies was administered. Eight manufacturers from the medical device industry completed the retrospective phone interviews, and five of them participated in the prospective survey. According to the overall feedback, the Hb-HTA process timeline and transparency are major issues, and the expectations of internal committees, especially in terms of clinical evidence, remain difficult to understand. However, despite this and due to the complexity of reimbursement processes at the national level, manufacturers are increasingly considering hospital adoption through Hb-HTA submission as a viable market access and coverage opportunity. Our study reaffirms the primary role of hospitals in the diffusion of innovative medical devices. However, to ensure efficient and broad access to innovation, cooperation between local and national HTA bodies is critical and should be promoted.

Guidelines by the AAPM and GEC-ESTRO on the use of innovative brachytherapy devices and applications: Report of Task Group 167

International Nuclear Information System (INIS)

Nath, Ravinder; Rivard, Mark J.; DeWerd, Larry A.; Dezarn, William A.; Thompson Heaton, H.; Ibbott, Geoffrey S.; Meigooni, Ali S.; Ouhib, Zoubir; Rusch, Thomas W.; Siebert, Frank-André; Venselaar, Jack L. M.

2016-01-01

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used in the evaluation of innovative devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining the equivalence of the innovative treatment modality to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of innovative radiotherapy devices or applications is a critical part in which physicists should be actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative brachytherapy devices and applications and includes evaluation of (1) dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, (2) risks and benefits from a regulatory and safety perspective, and (3) resource assessment and preparedness. Further, it is suggested that any developed calibration methods be traceable to a primary standards dosimetry laboratory (PSDL) such as the National Institute of Standards and Technology in the U.S. or to other PSDLs located elsewhere such as in Europe. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the Accredited Dosimetry Calibration Laboratories in the U.S. is encouraged before a source is introduced into widespread routine clinical use. The American Association of Physicists in Medicine and the Groupe Européen de Curiethérapie-European Society for Radiotherapy and Oncology (GEC-ESTRO) have developed guidelines for the safe and consistent application of brachytherapy using innovative devices

Guidelines by the AAPM and GEC-ESTRO on the use of innovative brachytherapy devices and applications: Report of Task Group 167

Energy Technology Data Exchange (ETDEWEB)

Nath, Ravinder [Department of Therapeutic Radiology, School of Medicine, Yale University, New Haven, Connecticut 06510 (United States); Rivard, Mark J., E-mail: mark.j.rivard@gmail.com [Department of Radiation Oncology, School of Medicine, Tufts University, Boston, Massachusetts 02111 (United States); DeWerd, Larry A. [Accredited Dosimetry and Calibration Laboratory, University of Wisconsin, Madison, Wisconsin 53706 (United States); Dezarn, William A. [Department of Radiation Oncology, School of Medicine, Wake Forest University, Winston-Salem, North Carolina 27157 (United States); Thompson Heaton, H. [Hagerstown, Maryland 21740 (United States); Ibbott, Geoffrey S. [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States); Meigooni, Ali S. [Comprehensive Cancer Centers of Nevada, Las Vegas, Nevada 89169 (United States); Ouhib, Zoubir [Radiation Oncology, Lynn Regional Cancer Center, Delray Beach, Florida 33484 (United States); Rusch, Thomas W. [Xoft, Inc., A Subsidiary of iCAD, Inc., San Jose, California 95134 (United States); Siebert, Frank-André [Clinic of Radiotherapy, Universitätsklinikum Schleswig-Holstein, Campus Kiel, Kiel 24105 (Germany); Venselaar, Jack L. M. [Department of Medical Physics and Engineering, Instituut Verbeeten, Tilburg LA 5000 (Netherlands)

2016-06-15

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used in the evaluation of innovative devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining the equivalence of the innovative treatment modality to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of innovative radiotherapy devices or applications is a critical part in which physicists should be actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative brachytherapy devices and applications and includes evaluation of (1) dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, (2) risks and benefits from a regulatory and safety perspective, and (3) resource assessment and preparedness. Further, it is suggested that any developed calibration methods be traceable to a primary standards dosimetry laboratory (PSDL) such as the National Institute of Standards and Technology in the U.S. or to other PSDLs located elsewhere such as in Europe. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the Accredited Dosimetry Calibration Laboratories in the U.S. is encouraged before a source is introduced into widespread routine clinical use. The American Association of Physicists in Medicine and the Groupe Européen de Curiethérapie-European Society for Radiotherapy and Oncology (GEC-ESTRO) have developed guidelines for the safe and consistent application of brachytherapy using innovative devices

Innovation Best Practices in the Medical Device Industry.

Science.gov (United States)

Ray, Partha P; Amaral, Joseph F; Hinoul, Piet

2017-06-01

Advances in patient care often germinate from keen clinical insights and a needs-based approach to innovation. Although there is an important role for incremental improvements to existing solutions, transformational innovation is what truly drives real shifts in clinical outcomes and subsequently patient satisfaction, market access, and economic value. A good example of this is the evolution of the coronary stent market. The best innovation programs are focused on unmet needs rather than solutions, call for a careful articulation of the specific problems to be solved, involve a deep dive within a clinical area, and seek to prioritize research and development investments into areas where the greatest impact can be expected. To enhance its ability to pursue breakthrough innovation, Johnson and Johnson (J&J) has organized itself along priority disease areas, created the global J&J Innovation organization to pursue external technology and know-how, and continues to partner closely with clinical practitioners. The process undertaken at J&J to acquire a microwave ablation technology and enter the interventional oncology space is a recent case study of these innovation principles and organizational focus in action. Copyright © 2017 Elsevier Inc. All rights reserved.

New Innovations in Circulatory Support With Ventricular Assist Device and Extracorporeal Membrane Oxygenation Therapy.

Science.gov (United States)

Sladen, Robert N

2017-04-01

The past decade has seen an exponential increase in the application and development of durable long-term as well as nondurable short-term mechanical circulatory support for cardiogenic shock and acute or chronic heart failure. Support has evolved from bridge-to-transplant to destination therapy, bridge to rescue, bridge to decision making, and bridge to a bridge. Notable trends include device miniaturization, minimally invasive and/or percutaneous insertion, and efforts to superimpose pulsatility on continuous flow. We can certainly anticipate that innovation will accelerate in the months and years to come. However, despite-or perhaps because of-the enhanced equipment now available, mechanical circulatory support is an expensive, complex, resource-intensive modality. It requires considerable expertise that should preferably be centralized to highly specialized centers. Formidable challenges remain: systemic inflammatory response syndromes and vasoplegia after device insertion; postoperative sepsis; optimal anticoagulation regimens to prevent device-induced thrombosis and cerebral thromboembolism; wound site, intracranial, and gastrointestinal bleeding; multisystem injury and failure; patient dissatisfaction (even when providers consider the procedure a "success"); and ethical decision making in conditions of futility.

[Projects to accelerate the practical use of innovative medical devices to collaborate with TWIns, Center for Advanced Biomedical Sciences, Waseda University and School of Engineering, The University of Tokyo].

Science.gov (United States)

Niimi, Shingo; Umezu, Mitsuo; Iseki, Hiroshi; Harada, Hiroshi Kasanuki Noboru; Mitsuishi, Mamoru; Kitamori, Takehiko; Tei, Yuichi; Nakaoka, Ryusuke; Haishima, Yuji

2014-01-01

Division of Medical Devices has been conducting the projects to accelerate the practical use of innovative medical devices to collaborate with TWIns, Center for Advanced Biomedical Sciences, Waseda University and School of Engineering, The University of Tokyo. The TWIns has been studying to aim at establishment of preclinical evaluation methods by "Engineering Based Medicine", and established Regulatory Science Institute for Medical Devices. School of Engineering, The University of Tokyo has been studying to aim at establishment of assessment methodology for innovative minimally invasive therapeutic devices, materials, and nanobio diagnostic devices. This report reviews the exchanges of personnel, the implement systems and the research progress of these projects.

Innovative rubble mound breakwaters for wave energy conversion

International Nuclear Information System (INIS)

Contestabile, Pasquale; Vicinanza, Diego; Iuppa, Claudio; Cavallaro, Luca; Foti, Enrico

2015-01-01

This paper presents a new Wave Energy Converter named Overtopping BReakwater for Energy Conversion (OBREC) which consists of a rubble mound breakwater with a front reservoir designed with the aim of capturing the wave overtopping in order to produce electricity. The energy is extracted via low head turbines, using the difference in water levels between the reservoir and the mean sea water level. The new design should be capable of adding a revenue generation function to a breakwater while adding cost sharing benefits due to integration. The design can be applied to harbour expansions, existing breakwater maintenance or upgrades due to climate change for a relatively low cost, considering the breakwater would be built regardless of the inclusion of a WEC [it

Modelling and Testing of Wave Dragon Wave Energy Converter Towards Full Scale Deployment

DEFF Research Database (Denmark)

Parmeggiani, Stefano

-commercial stage in which it has proven difficult to secure the necessary funding for the deployment of a full-scale demonstrator unit. The work presented aims at easing this process, by increasing public and scientific knowledge of the device, as well as by showing the latest progress in its development. Research....... This is mainly due to the development of an updated overtopping model specifically suited to Wave Dragon, which allows greater quality to predictions of the primary energy absorption of the device compared to previous versions. At the same time an equitable approach has been described and used in the performance......, the research has also provided a deeper insight into the physics of the overtopping process by individually assessing the influence of related device configuration and wave features, which goes beyond the present application and may be used for other overtopping WECs as well. Comprehensive analysis...

Economic Assessment of Overtopping BReakwater for Energy Conversion (OBREC: A Case Study in Western Australia

Directory of Open Access Journals (Sweden)

Pasquale Contestabile

2016-12-01

Full Text Available This paper constructs an optimal configuration assessment, in terms of the financial returns, of the Overtopping BReakwater for wave Energy Conversion (OBREC. This technology represents a hybrid wave energy harvester, totally embedded in traditional rubble mound breakwaters. Nine case studies along the southern coast of Western Australia have been analysed. The technique provides tips on how to estimate the quality of the investments, for benchmarking with different turbine strategy layouts and overlapping with the costs of traditional rubble mound breakwaters. Analyses of the offshore and nearshore wave climate have been studied by a high resolution coastal propagation model, forced with wave data from the European Centre for Medium-Range Weather Forecasts (ECMWF. Inshore wave conditions have been used to quantify the exploitable resources. It has been demonstrated that the optimal investment strategy is nonlinearly dependent on potential electricity production due to outer technical constraints. The work emphasizes the importance of integrating energy production predictions in an economic decision framework for prioritizing adaptation investments.

Laboratory Tests in the Development of WaveCat

Directory of Open Access Journals (Sweden)

James Allen

2016-12-01

Full Text Available WaveCat, a novel overtopping Wave Energy Converter, was tested with the aim of determining its performance under different sea states, establishing a starting point for optimisation of the device, numerical model validation and proof-of-concept for the control systems. The tests were carried out at a 1:30 scale in the Ocean Basin of the COAST Laboratory at University of Plymouth. A state-of-the-art control system was implemented, and overtopping rates and device motions were recorded alongside the wave field. It was observed that power generation is dependent on both the wave height and period, with smaller periods tending to produce greater overtopping rates, and therefore greater power generation, for the same wave height. Due to time constraints in the laboratory, only one configuration of draft/freeboard was tested; with this configuration, overtopping occurred under significant wave heights of 0.083 m or more, corresponding to 2.5 m or more in prototype values. These experimental results form the basis for future development and optimisation of WaveCat.

Innovation in Neurosurgery: Intellectual Property Strategy and Academia/Industrial Collaboration.

Science.gov (United States)

Murayama, Yuichi

2016-09-15

Neurosurgery has tremendous possibilities for development of innovative medical devices. However, most of the neurosurgical devices used in Japan are imported products. Promotion and development of domestic medical devices is highly encouraged and it is one of the pillars of Prime Minister Shinzo Abe's growth strategy of Japanese economy. Innovative "Made in Japan" medical devices can be developed by interdisciplinary collaboration between industries and academic institutions. Proper orientation of medical and engineering education, social and administrative awareness of the need of facilitating the medical devices creative process with corresponding regulatory changes, and appropriate medical and technological infrastructure establishment are needed for stimulating medical device innovation.

The need for accurate reporting and archival of data for innovative energy conversion devices: the INE database

International Nuclear Information System (INIS)

Bailey, P.G.; Grotz, T.; Hurtak, J.J.

1998-01-01

A methodology is presented to collect, document, and summarize the findings of the various experiments, motors, generators, devices, and demonstrations in the innovative energy conversion areas that have been reported in the past several years to produce very high-efficiency or so-called over-unity operation. The concepts of free-energy and over-unity devices are not new, and many examples of such devices have been built utilizing various forms of potential energy within the last 100 years, such as hydro-electric dams and nuclear reactors. As many such devices and experiments are currently being reported, it has become very important and necessary to collect the data available on each, cross-check the data with other researchers, and maintain an accurate and truthful accounting of the status of each device and experiment. The INE Database has become an internationally recognized summary of such data. This paper presents a complete description of this database, its location on the publicly available internet, provides detailed instruction on how to add new devices and experiments to this database, and also explains how to modify and update any of the existing data. Selection criteria based upon technical interest, and also on commercialization interest, allow these data to be easily ranked for comparison and reference

Innovative Breakwaters Design for Wave Energy Conversion

DEFF Research Database (Denmark)

Vicinanza, Diego; Stagonas, D.; Müller, G.

2012-01-01

the rubble mound breakwaters and seawalls related activity and the energy demand of small human communities. Wave loadings and overtopping on a seawall and rubble mound breakwater with front reservoir are discussed on the basis of physical 2-D model tests carried out at University of Southampton (UK...

Technological innovations in implants used for pain therapies.

Science.gov (United States)

Shaw, Andrew; Sharma, Mayur; Deogaonkar, Milind; Rezai, Ali

2014-10-01

The field of pain management has experienced tremendous growth in implantable therapies secondary to the innovations of bioengineers, implanters, and industry. Every aspect of neuromodulation is amenable to innovation from implanting devices to anchors, electrodes, programming, and even patient programmers. Patients with previously refractory neuropathic pain syndromes have new and effective pain management strategies that are a direct result of innovations in implantable devices. Copyright © 2014 Elsevier Inc. All rights reserved.

Efficient generation of hepatic cells from mesenchymal stromal cells by an innovative bio-microfluidic cell culture device.

Science.gov (United States)

Yen, Meng-Hua; Wu, Yuan-Yi; Liu, Yi-Shiuan; Rimando, Marilyn; Ho, Jennifer Hui-Chun; Lee, Oscar Kuang-Sheng

2016-08-19

Mesenchymal stromal cells (MSCs) are multipotent and have great potential in cell therapy. Previously we reported the differentiation potential of human MSCs into hepatocytes in vitro and that these cells can rescue fulminant hepatic failure. However, the conventional static culture method neither maintains growth factors at an optimal level constantly nor removes cellular waste efficiently. In addition, not only is the duration of differentiating hepatocyte lineage cells from MSCs required to improve, but also the need for a large number of hepatocytes for cell therapy has not to date been addressed fully. The purpose of this study is to design and develop an innovative microfluidic device to overcome these shortcomings. We designed and fabricated a microfluidic device and a culture system for hepatic differentiation of MSCs using our protocol reported previously. The microfluidic device contains a large culture chamber with a stable uniform flow to allow homogeneous distribution and expansion as well as efficient induction of hepatic differentiation for MSCs. The device enables real-time observation under light microscopy and exhibits a better differentiation efficiency for MSCs compared with conventional static culture. MSCs grown in the microfluidic device showed a higher level of hepatocyte marker gene expression under hepatic induction. Functional analysis of hepatic differentiation demonstrated significantly higher urea production in the microfluidic device after 21 days of hepatic differentiation. The microfluidic device allows the generation of a large number of MSCs and induces hepatic differentiation of MSCs efficiently. The device can be adapted for scale-up production of hepatic cells from MSCs for cellular therapy.

Experimental analysis on a 1:2 scale model of the double light pipe, an innovative technological device for daylight transmission

Energy Technology Data Exchange (ETDEWEB)

Baroncini, C.; Boccia, O.; Chella, F.; Zazzini, P. [D.S.S.A.R.R. Faculty of Architecture, University ' ' G. D' Annunzio' ' Viale Pindaro 42, 65127 Pescara (Italy)

2010-02-15

In this paper the authors present the double light pipe, an innovative technological device, designed as an evolution of a traditional light pipe, which distributes daylight to underground areas of a building, illuminating, at the same time, the passage areas thanks to a larger collector and a second transparent pipe attached to the first one. Unlike the traditional light pipe, thanks to this double illuminating function it can be located in the middle of a room, despite its encumbrance. In this paper the technological design of the double light pipe is presented and the results of an experimental analysis on a reduced scale (1:2) model are shown. Internal illuminance data over horizontal and vertical work-planes were measured in various sky conditions with or without direct solar radiation. Being this innovative device obtained by a light pipe integrated with a second pipe, it performs like a traditional light pipe for the final room and, at the same time, illuminates the intermediate room giving it uniform and high quality light, particularly indicated for wide plant areas, such as show-rooms or museums. (author)

Labor Laws and Innovation

OpenAIRE

Viral V. Acharya; Ramin P. Baghai; Krishnamurthy V. Subramanian

2013-01-01

Can stringent labor laws be efficient? Possibly, if they provide firms with a commitment device to not punish short-run failures and thereby incentivize the pursuit of value-maximizing innovative activities. In this paper, we provide empirical evidence that strong labor laws indeed appear to have an ex ante positive incentive effect by encouraging the innovative pursuits of firms and their employees. Using patents and citations as proxies for innovation and a time-varying index of labor laws,...

Challenges to value-enhancing innovation in health care delivery: commonalities and contrasts with innovation in drugs and devices

National Research Council Canada - National Science Library

Garber, Steven

2011-01-01

.... health policymakers. The role of innovation in advancing these social goals is controversial, with many seeing innovation as a major cause of cost growth and many others viewing innovation as crucial for improving...

BioInnovate Ireland--fostering entrepreneurial activity through medical device innovation training.

Science.gov (United States)

Bruzzi, M S; Linehan, J H

2013-09-01

In the midst of a rich environment for medical device development and manufacturing, universities can play a critical role by developing relevant training programs to produce entrepreneurs who can be efficient and successful in creating early stage companies by understanding deeply the issues involved in creating a useful device, how to raise money, designing early clinical studies and locating manufacturing partners.

Standardization and Innovation for Smart e-Health Monitoring Devices

DEFF Research Database (Denmark)

Mihovska, Albena D.; Kyriazakos, Sofoklis; Mihaylov, Mihail Rumenov

2015-01-01

The challenges faced by standardization in relation to the potential of wireless communication technologies to deliver lower cost, higher efficiency, enhanced quality of experience and diversified smart e-Health services, are multi-fold and determined by the complexity of the myriad of emerging...... user and usage scenarios. In addition, there is the challenge of protection of privacy and the maintenance of trust. This paper aims to show the evidence of the correlation between standardization and innovation in the area of ehealth technology. It describes a capability framework proposed...... for the delivery of e-Health services in support of independent living. The proposed framework incorporates innovative research and standardized solutions. The paper addresses the correlation between standardization and innovation, in particular for the area of e-Health. It analyzes the potential of research...

Using Innovation Diffusion Theory and the Technolgy Acceptance Model to Evaluate the Security of Wireless Mobile Devices at a Post Secondary Institution

Science.gov (United States)

Feliciano-Torres, Hector L.

2017-01-01

The purpose of this quantitative, descriptive non experimental study was to investigate the use of wireless mobile network devices at a post-secondary institution using the innovation diffusion theory (IDT) and technology acceptance model (TAM) as background theories. The researcher intended to explore how students and personnel of the institution…

Hydraulic model tests of an innovative dike crest design

NARCIS (Netherlands)

Verhagen, H.J.; Kortenhaus, A.; Bollinger, K.; Dassayanake, D.

2007-01-01

Report on laboratory tests on a crest drainage dike; investigation if a channel in the crest of the dike is able to decrease the amount of overtopping over the dike. Chapter 2 provides details about findings from previous studies and the relevance of those findings to this research project.

Relationship between innovation capability, innovation type, and firm performance

Directory of Open Access Journals (Sweden)

R.P. Jayani Rajapathirana

2018-01-01

Full Text Available Insurers are well versed in the litany of challenging conditions facing the sector. These challenges are economic, political, regulatory, legal, social, and technological. As a result of those pressures, the industry is experiencing increasing competition, muted growth, and an excess of capital. The increased connectivity among household and workplace devices, the development of autonomous vehicle and the rising threat of cyber attacks are transforming the way people live and risk they need to mitigate with insurance products. Insurers need to adopt their business models address the changes which can be threatening to the growth of the industry (Deloitte, 2017. Innovation is widely regarded as pinnacle success factor in highly competitive and global economy. An innovation perspective draws a clear picture of future opportunities that lie ahead. The main purpose of this paper is to explore the relationship among innovations capability, innovation type and on the different aspect of firm performance including innovation, market and financial performance based on an empirical study covering insurance industry in Sri Lanka. The research framework developed in this study was tested 379 senior managers of insurance companies. The empirical verification of assumption of this model has given evidence to confirm the relationship between innovation capabilities; innovation efforts and firm performance are significant and strong. The results of this study could lead effective management of innovation capability which helps to deliver more effective innovations outcomes to generate better performance and it would be benefits for management of the insurance companies.

Reverse innovation in maternal health.

Science.gov (United States)

Firoz, Tabassum; Makanga, Prestige Tatenda; Nathan, Hannah L; Payne, Beth; Magee, Laura A

2017-09-01

Reverse innovation, defined as the flow of ideas from low- to high-income settings, is gaining traction in healthcare. With an increasing focus on value, investing in low-cost but effective and innovative solutions can be of mutual benefit to both high- and low-income countries. Reverse innovation has a role in addressing maternal health challenges in high-income countries by harnessing these innovative solutions for vulnerable populations especially in rural and remote regions. In this paper, we present three examples of 'reverse innovation' for maternal health: a low-cost, easy-to-use blood pressure device (CRADLE), a diagnostic algorithm (mini PIERS) and accompanying mobile app (PIERS on the Move), and a novel method for mapping maternal outcomes (MOM).

Innovative postmarket device evaluation using a quality registry to monitor thoracic endovascular aortic repair in the treatment of aortic dissection.

Science.gov (United States)

Beck, Adam W; Lombardi, Joseph V; Abel, Dorothy B; Morales, J Pablo; Marinac-Dabic, Danica; Wang, Grace; Azizzadeh, Ali; Kern, John; Fillinger, Mark; White, Rodney; Cronenwett, Jack L; Cambria, Richard P

2017-05-01

United States Food and Drug Administration (FDA)-mandated postapproval studies have long been a mainstay of the continued evaluation of high-risk medical devices after initial marketing approval; however, these studies often present challenges related to patient/physician recruitment and retention. Retrospective single-center studies also do not fully represent the spectrum of real-world performance nor are they likely to have a sufficiently large enough sample size to detect important signals. In recent years, The FDA Center for Devices and Radiological Health has been promoting the development and use of patient registries to advance infrastructure and methodologies for medical device investigation. The FDA 2012 document, "Strengthening the National System for Medical Device Post-market Surveillance," highlighted registries as a core foundational infrastructure when linked to other complementary data sources, including embedded unique device identification. The Vascular Quality Initiative (VQI) thoracic endovascular aortic repair for type B aortic dissection project is an innovative method of using quality improvement registries to meet the needs of device evaluation after market approval. Here we report the organization and background of this project and highlight the innovation facilitated by collaboration of physicians, the FDA, and device manufacturers. This effort used an existing national network of VQI participants to capture patients undergoing thoracic endovascular aortic repair for acute type B aortic dissection within a registry that aligns with standard practice and existing quality efforts. The VQI captures detailed patient, device, and procedural data for consecutive eligible cases under the auspices of a Patient Safety Organization (PSO). Patients were divided into a 5-year follow-up group (200 acute; 200 chronic dissections) and a 1-year follow-up group (100 acute; 100 chronic). The 5-year cohort required additional imaging details, and the 1-year

Experimental investigation of rubble mound breakwaters for wave energy conversion

DEFF Research Database (Denmark)

Luppa, C.; Contestabile, P.; Cavallaro, L.

2015-01-01

The paper describes recent laboratory investigation on the breakwater integrated device named “OBREC” (Overtopping BReakwater for Energy Conversion). This technology recently appeared on the wave energy converter scene as an executive outcome of improving composite seawalls by including overtoppi......-by-wave measurement of couples of hydraulic head-flow rate acting on a virtual turbine inlet. Finally, the influence of draft length on overtopping discharge has been identified....... type wave energy converters [1]. Two complementary experimental campaigns were carried out, in 2012 and in 2014. Several geometries and wave conditions were examined. Preliminary comparison of hydraulic behaviour has been summarized, focusing on reflection analysis and overtopping flow rate....... Preliminary design formulae are presented to predict overtopping at the rear side of the structure and in to the front reservoir based on both datasets. Moreover, some important results have been presented on hydraulic behaviour of OBREC with saturated reservoir. Particularly attention is paid to wave...

Integration Head Mounted Display Device and Hand Motion Gesture Device for Virtual Reality Laboratory

Science.gov (United States)

Rengganis, Y. A.; Safrodin, M.; Sukaridhoto, S.

2018-01-01

Virtual Reality Laboratory (VR Lab) is an innovation for conventional learning media which show us whole learning process in laboratory. There are many tools and materials are needed by user for doing practical in it, so user could feel new learning atmosphere by using this innovation. Nowadays, technologies more sophisticated than before. So it would carry in education and it will be more effective, efficient. The Supported technologies are needed us for making VR Lab such as head mounted display device and hand motion gesture device. The integration among them will be used us for making this research. Head mounted display device for viewing 3D environment of virtual reality laboratory. Hand motion gesture device for catching user real hand and it will be visualized in virtual reality laboratory. Virtual Reality will show us, if using the newest technologies in learning process it could make more interesting and easy to understand.

Effect of inflow discharges on the development of matric suction and volumetric water content for dike during overtopping tests

Science.gov (United States)

Hassan, Marwan A.; Ismail, Mohd A. M.

2017-10-01

The point of this review is to depict the impact of various inflow discharge rate releases on the instruments of matric suction and volumetric water content during an experimental test of spatial overtopping failure at school of civil engineering in universiti Sains of Malaysia. A dry sand dike was conducted inside small flume channel with twelve sensors of tensiometer and Time-Domain Reflectometer (TDR). Instruments are installed in the soil at different locations in downstream and upstream slopes of the dike for measuring the response of matric suction and volumetric water content, respectively. Two values of inflow discharge rates of 30 and 40 L/min are utilized as a part of these experiments to simulate the effectiveness of water reservoirs in erosion mechanism. The outcomes demonstrate that the matric suction and volumetric water content are decreased and increased, respectively for both inflow discharges. The higher inflow discharges accelerate the saturation of dike soil and the erosion process faster than that for the lower inflow discharges.

A concept ideation framework for medical device design.

Science.gov (United States)

Hagedorn, Thomas J; Grosse, Ian R; Krishnamurty, Sundar

2015-06-01

Medical device design is a challenging process, often requiring collaboration between medical and engineering domain experts. This collaboration can be best institutionalized through systematic knowledge transfer between the two domains coupled with effective knowledge management throughout the design innovation process. Toward this goal, we present the development of a semantic framework for medical device design that unifies a large medical ontology with detailed engineering functional models along with the repository of design innovation information contained in the US Patent Database. As part of our development, existing medical, engineering, and patent document ontologies were modified and interlinked to create a comprehensive medical device innovation and design tool with appropriate properties and semantic relations to facilitate knowledge capture, enrich existing knowledge, and enable effective knowledge reuse for different scenarios. The result is a Concept Ideation Framework for Medical Device Design (CIFMeDD). Key features of the resulting framework include function-based searching and automated inter-domain reasoning to uniquely enable identification of functionally similar procedures, tools, and inventions from multiple domains based on simple semantic searches. The significance and usefulness of the resulting framework for aiding in conceptual design and innovation in the medical realm are explored via two case studies examining medical device design problems. Copyright © 2015 Elsevier Inc. All rights reserved.

Specification of Instrumentation of Multi MW Wave Dragon Offshore Wave Energy Converter

DEFF Research Database (Denmark)

Gilling, Lasse; Kofoed, Jens Peter

Wave Dragon is a wave energy converter of the overtopping type and is described e.g. in Tedd et. al. (2006). The device has been thoroughly tested on a 1:51.8 scale model in wave laboratories and a 1:4.5 scale model deployed in Nissum Bredning, a large inland waterway in Denmark. Based on the exp......Wave Dragon is a wave energy converter of the overtopping type and is described e.g. in Tedd et. al. (2006). The device has been thoroughly tested on a 1:51.8 scale model in wave laboratories and a 1:4.5 scale model deployed in Nissum Bredning, a large inland waterway in Denmark. Based...

77 FR 18793 - Spectrum Sharing Innovation Test-Bed Pilot Program

Science.gov (United States)

2012-03-28

.... 120322212-2212-01] Spectrum Sharing Innovation Test-Bed Pilot Program AGENCY: National Telecommunications... Innovation Test-Bed pilot program to assess whether devices employing Dynamic Spectrum Access techniques can... Spectrum Sharing Innovation Test-Bed (Test-Bed) pilot program to examine the feasibility of increased...

Applying Rapid Acquisition Policy Lessons for Defense Innovation

Science.gov (United States)

2017-12-21

import- ing Silicon Valley- style innovation practices to its acquisition process, it is im- portant to assess an organization’s ability to...these efforts. Keywords: defense acquisition, defense procurement, rapid acquisition, de- fense innovation, program management , organizational culture...Device De- feat Organization, JIEDDO, Rapid Equipping Force, REF Silicon Valley- style innovation is a hot topic in the Department of De-fense (DOD). For

[Medical doctors driving technological innovation: questions about and innovation management approaches to incentive structures for lead users].

Science.gov (United States)

Bohnet-Joschko, Sabine; Kientzler, Fionn

2010-01-01

Management science defines user-generated innovations as open innovation and lead user innovation. The medical technology industry finds user-generated innovations profitable and even indispensable. Innovative medical doctors as lead users need medical technology innovations in order to improve patient care. Their motivation to innovate is mostly intrinsic. But innovations may also involve extrinsic motivators such as gain in reputation or monetary incentives. Medical doctors' innovative activities often take place in hospitals and are thus embedded into the hospital's organisational setting. Hospitals find it difficult to gain short-term profits from in-house generated innovations and sometimes hesitate to support them. Strategic investment in medical doctors' innovative activities may be profitable for hospitals in the long run if innovations provide first-mover competitive advantages. Industry co-operations with innovative medical doctors offer chances but also bear potential risks. Innovative ideas generated by expert users may result in even higher complexity of medical devices; this could cause mistakes when applied by less specialised users and thus affect patient safety. Innovations that yield benefits for patients, medical doctors, hospitals and the medical technology industry can be advanced by offering adequate support for knowledge transfer and co-operation models.

Innovative detector ideas

International Nuclear Information System (INIS)

Ruchti, R.C.

1982-01-01

Excellent ideas abound in high resolution vertex detection, high resolution calorimetry, particle detection, and in operation of devices in high luminosity environments. With appropriate development of these innovations in instrumentation, we should be able to confront successfully the challenges of physics requiring high luminosity and very high energy

Technological innovation in neurosurgery: a quantitative study.

Science.gov (United States)

Marcus, Hani J; Hughes-Hallett, Archie; Kwasnicki, Richard M; Darzi, Ara; Yang, Guang-Zhong; Nandi, Dipankar

2015-07-01

Technological innovation within health care may be defined as the introduction of a new technology that initiates a change in clinical practice. Neurosurgery is a particularly technology-intensive surgical discipline, and new technologies have preceded many of the major advances in operative neurosurgical techniques. The aim of the present study was to quantitatively evaluate technological innovation in neurosurgery using patents and peer-reviewed publications as metrics of technology development and clinical translation, respectively. The authors searched a patent database for articles published between 1960 and 2010 using the Boolean search term "neurosurgeon OR neurosurgical OR neurosurgery." The top 50 performing patent codes were then grouped into technology clusters. Patent and publication growth curves were then generated for these technology clusters. A top-performing technology cluster was then selected as an exemplar for a more detailed analysis of individual patents. In all, 11,672 patents and 208,203 publications related to neurosurgery were identified. The top-performing technology clusters during these 50 years were image-guidance devices, clinical neurophysiology devices, neuromodulation devices, operating microscopes, and endoscopes. In relation to image-guidance and neuromodulation devices, the authors found a highly correlated rapid rise in the numbers of patents and publications, which suggests that these are areas of technology expansion. An in-depth analysis of neuromodulation-device patents revealed that the majority of well-performing patents were related to deep brain stimulation. Patent and publication data may be used to quantitatively evaluate technological innovation in neurosurgery.

Class 1 devices case studies in medical devices design

CERN Document Server

Ogrodnik, Peter J

2014-01-01

The Case Studies in Medical Devices Design series consists of practical, applied case studies relating to medical device design in industry. These titles complement Ogrodnik's Medical Device Design and will assist engineers with applying the theory in practice. The case studies presented directly relate to Class I, Class IIa, Class IIb and Class III medical devices. Designers and companies who wish to extend their knowledge in a specific discipline related to their respective class of operation will find any or all of these titles a great addition to their library. Class 1 Devices is a companion text to Medical Devices Design: Innovation from Concept to Market. The intention of this book, and its sister books in the series, is to support the concepts presented in Medical Devices Design through case studies. In the context of this book the case studies consider Class I (EU) and 510(k) exempt (FDA) . This book covers classifications, the conceptual and embodiment phase, plus design from idea to PDS. These title...

Federal Barriers to Innovation

Science.gov (United States)

Miller, Raegen; Lake, Robin

2012-01-01

With educational outcomes inadequate, resources tight, and students' academic needs growing more complex, America's education system is certainly ready for technological innovation. And technology itself is ripe to be exploited. Devices harnessing cheap computing power have become smart and connected. Voice recognition, artificial intelligence,…

Open Innovation in practice: closed NPD networks leading to high innovation performance for SME's.

NARCIS (Netherlands)

Pullen, A.J.J.; de Weerd-Nederhof, Petronella C.; Groen, Arend J.; Fisscher, O.A.M.

2011-01-01

Cooperation with other organizations increases the innovation performance of organization, especially for small and medium-sized enterprises (SMEs) as they encounter liabilities of “smallness” (e.g., limited financial resources, and manpower). In the medical devices sector, collaboration with

The Multiplicity of Controls and the Making of Innovation

DEFF Research Database (Denmark)

Revellino, Silvana; Mouritsen, Jan

2009-01-01

are mediated by unique sets of technologies of control. In this process the innovation changes and adapts. This thesis is drawn from the case of Italian Autostrade's innovation Telepass which was an automatic toll collection devise developed to make traffic fast, safe and fluid. Throughout its development...... satisfaction, productivity and highly pointed achievement targets. This multiplicity of controls changed and adapted to the innovation as the innovation unfolds. The controls were part of the innovation more likely than an external device to make it transparent. They engaged the individual trials and changed...

An innovation for prevention of radiation induced latchup

International Nuclear Information System (INIS)

Xu Xianguo; Hu Jiandong; Xu Xi

2006-01-01

An innovation for prevention latchup, pseudo-latchup path method, has been put forward that is based on latchup effects of bulk-Si CMOS devices. After the design of pseudo-latchup path method is studied in detail, a practice and the corresponding simulation and experiment validation result are given in this text. Pseudo-latchup path method can be used to prevent permanent latchup, but not to eliminate the dose rate upset in bulk-Si CMOS devices. An innovation for prevention latchup, pseudo-latchup path method, has been put forward that is based on latchup effects of bulk-Si CMOS devices. After the design of pseudo-latchup path method is studied in detail, a practice and the corresponding simulation and experiment validation result are given in this text. Pseudo-latchup path method can be used to prevent permanent latchup, but not to eliminate the dose rate upset in bulk-Si CMOS devices. (authors)

3 Years Experience with Energy Production on the Nissum Bredning Wave Dragon Prototype

DEFF Research Database (Denmark)

Frigaard, Peter; Tedd, James; Kofoed, Jens Peter

2006-01-01

Wave Dragon is a floating wave energy converter working by extracting energy principally by means of overtopping of waves into a reservoir. A 1:4.5 scale prototype has been sea tested for 20 months. This paper presents results from testing, experiences gained and developments made during this ext......Wave Dragon is a floating wave energy converter working by extracting energy principally by means of overtopping of waves into a reservoir. A 1:4.5 scale prototype has been sea tested for 20 months. This paper presents results from testing, experiences gained and developments made during...... this extended period. The prototype is highly instrumented. The overtopping characteristic and the power produced are presented here. This has enabled comparison between the prototype and earlier results from both laboratory model and computer simulation. This gives the optimal operating point and the expected...... power of the device. The project development team has gained much soft experience from working in the harsh offshore environment. In particular the effect of marine growth in the draft tubes of the turbines has been investigated. The control of the device has been a focus for development as is operates...

Wave Dragon

DEFF Research Database (Denmark)

Tedd, James; Kofoed, Jens Peter; Knapp, W.

2006-01-01

Wave Dragon is a floating wave energy converter working by extracting energy principally by means of overtopping of waves into a reservoir. A 1:4.5 scale prototype has been sea tested for 20 months. This paper presents results from testing, experiences gained and developments made during this ext......Wave Dragon is a floating wave energy converter working by extracting energy principally by means of overtopping of waves into a reservoir. A 1:4.5 scale prototype has been sea tested for 20 months. This paper presents results from testing, experiences gained and developments made during...... this extended period. The prototype is highly instrumented. The overtopping characteristic and the power produced are presented here. This has enabled comparison between the prototype and earlier results from both laboratory model and computer simulation. This gives the optimal operating point and the expected...... power of the device. The project development team has gained much soft experience from working in the harsh offshore environment. In particular the effect of marine growth in the draft tubes of the turbines has been investigated. The control of the device has been a focus for development as is operates...

Model Testing of the Wave Energy Converter Seawave Slot-Cone Generator

DEFF Research Database (Denmark)

Kofoed, Jens Peter

This report presents the results of a preliminary experimental study of the wave energy convert (WEC) Seawave Slot-Cone Generator (SSG). SSG is a WEC utilizing wave overtopping in multiple reservoirs. In the present SSG setup three reservoirs has been used. Model tests have been performed using...... a scale model (length scale 1:15) of a SSG device to be installed on the west coast of the island Kvitsøy near Stavanger, Norway. The tests were carried out at Dept. of Civil Engineering, Aalborg University (AAU) in the 3D deep water wave tank. The model has been subjected to regular and irregular waves...... corresponding to typical conditions off shore from the intended installation site. The overtopping rates for the individual reservoirs have been measured and the potential energy in the overtopping water has been calculated....

Innovative Microbial Surface Sampler, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The QS Team will develop an Innovative Microbial Surface Sampling (IMSS) device design and provide prototype kits for use in the International Space Station (ISS)....

Analytical Chemistry in the Regulatory Science of Medical Devices.

Science.gov (United States)

Wang, Yi; Guan, Allan; Wickramasekara, Samanthi; Phillips, K Scott

2018-06-12

In the United States, regulatory science is the science of developing new tools, standards, and approaches to assess the safety, efficacy, quality, and performance of all Food and Drug Administration-regulated products. Good regulatory science facilitates consumer access to innovative medical devices that are safe and effective throughout the Total Product Life Cycle (TPLC). Because the need to measure things is fundamental to the regulatory science of medical devices, analytical chemistry plays an important role, contributing to medical device technology in two ways: It can be an integral part of an innovative medical device (e.g., diagnostic devices), and it can be used to support medical device development throughout the TPLC. In this review, we focus on analytical chemistry as a tool for the regulatory science of medical devices. We highlight recent progress in companion diagnostics, medical devices on chips for preclinical testing, mass spectrometry for postmarket monitoring, and detection/characterization of bacterial biofilm to prevent infections.

Medical Devices; Immunology and Microbiology Devices; Classification of the Device To Detect and Identify Microbial Pathogen Nucleic Acids in Cerebrospinal Fluid. Final order.

Science.gov (United States)

2017-10-20

The Food and Drug Administration (FDA or we) is classifying the device to detect and identify microbial pathogen nucleic acids in cerebrospinal fluid into class II (special controls). The special controls that will apply to the device type are identified in this order and will be part of the codified language for the device to detect and identify microbial pathogen nucleic acids in cerebrospinal fluid’s classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.

Nano devices and circuit techniques for low-energy applications and energy harvesting

CERN Document Server

2016-01-01

This book describes the development of core technologies to address two of the most challenging issues in research for future IT platform development, namely innovative device design and reduction of energy consumption. Three key devices, the FinFET, the TunnelFET, and the electromechanical nanoswitch are described with extensive details of use for practical applications. Energy issues are also covered in a tutorial fashion from material physics, through device technology, to innovative circuit design. The strength of this book lies in its holistic approach dealing with material trends, state-of-the-art of key devices, new examples of circuits and systems applications.    This is the first of three books based on the Integrated Smart Sensors research project, which describe the development of innovative devices, circuits, and system-level enabling technologies.  The aim of the project was to develop common platforms on which various devices and sensors can be loaded, and to create systems offering signific...

Flexible magnetic thin films and devices

Science.gov (United States)

Sheng, Ping; Wang, Baomin; Li, Runwei

2018-01-01

Flexible electronic devices are highly attractive for a variety of applications such as flexible circuit boards, solar cells, paper-like displays, and sensitive skin, due to their stretchable, biocompatible, light-weight, portable, and low cost properties. Due to magnetic devices being important parts of electronic devices, it is essential to study the magnetic properties of magnetic thin films and devices fabricated on flexible substrates. In this review, we mainly introduce the recent progress in flexible magnetic thin films and devices, including the study on the stress-dependent magnetic properties of magnetic thin films and devices, and controlling the properties of flexible magnetic films by stress-related multi-fields, and the design and fabrication of flexible magnetic devices. Project supported by the National Key R&D Program of China (No. 2016YFA0201102), the National Natural Science Foundation of China (Nos. 51571208, 51301191, 51525103, 11274321, 11474295, 51401230), the Youth Innovation Promotion Association of the Chinese Academy of Sciences (No. 2016270), the Key Research Program of the Chinese Academy of Sciences (No. KJZD-EW-M05), the Ningbo Major Project for Science and Technology (No. 2014B11011), the Ningbo Science and Technology Innovation Team (No. 2015B11001), and the Ningbo Natural Science Foundation (No. 2015A610110).

Medical Devices; Obstetrical and Gynecological Devices; Classification of the Fetal Head Elevator. Final order.

Science.gov (United States)

2017-12-19

The Food and Drug Administration (FDA or we) is classifying the fetal head elevator into class II (special controls). The special controls that apply to the device type are identified in this order and will be part of the codified language for the fetal head elevator's classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.

Unmet needs: relevance to medical technology innovation?

Science.gov (United States)

McCarthy, Avril D; Sproson, Lise; Wells, Oliver; Tindale, Wendy

2014-01-01

This paper describes and discusses the role of unmet needs in the innovation of new medical technologies using the National Institute for Health Research Devices for Dignity (D4D) Healthcare Technology Co-operative as a case study. It defines an unmet need, providing a spectrum of classification and discusses the benefits and the challenges of identifying unmet need and its influence on the innovation process. The process by which D4D has captured and utilized unmet needs to drive technology innovation is discussed and examples given. It concludes by arguing that, despite the challenges, defining and reviewing unmet need is a fundamental factor in the success of medical technology innovation.

Thyroid radiofrequency ablation: Updates on innovative devices and techniques

Energy Technology Data Exchange (ETDEWEB)

Park, Hye Sun; Baek, Jung Hwan; Chung, Sae Rom; Choi, Young Jun; Lee, Jeong Hyun [Dept. of Radiology and Research Institute of Radiology, University of Ulsan College of Medicine, Asan Medical Center, Seoul (Korea, Republic of); Park, Auh Whan [Dept. of Radiology, Vascular and Interventional Radiology Section, University of Virginia Health System, Charlottesville (United States)

2017-08-01

Radiofrequency ablation (RFA) is a well-known, effective, and safe method for treating benign thyroid nodules and recurrent thyroid cancers. Thyroid-dedicated devices and basic techniques for thyroid RFA were introduced by the Korean Society of Thyroid Radiology (KSThR) in 2012. Thyroid RFA has now been adopted worldwide, with subsequent advances in devices and techniques. To optimize the treatment efficacy and patient safety, understanding the basic and advanced RFA techniques and selecting the optimal treatment strategy are critical. The goal of this review is to therefore provide updates and analysis of current devices and advanced techniques for RFA treatment of benign thyroid nodules and recurrent thyroid cancers.

And the winners were... Innovation Awards

CERN Multimedia

2003-01-01

The winners of the 2003 Economist innovation awards included Tim Berners-Lee for the WWW and Dr. Damadian for his suggestion that NMR could be used as a medical detection device for cancer (1/2 page).

Design and testing of an innovative solar radiation measurement device

International Nuclear Information System (INIS)

Badran, Omar; Al-Salaymeh, Ahmed; El-Tous, Yousif; Abdala, Wasfi

2010-01-01

After review of studies conducted on the solar radiation measuring systems, a new innovative instrument that would help in measuring the accurate solar radiation on horizontal surfaces has been designed and tested. An advanced instrument with ease of use and high precision that would enable the user to take the readings in terms of solar intensity (W/m 2 ) has been tested. Also, the innovative instrument can record instantaneous readings of the solar intensities as well as the averages value of the solar radiation flux during certain periods of time. The instrument based in its design on being programmed by programmable interfacing controller (PIC). Furthermore, the power supply circuit is fed by the solar energy cells and does not need an external power source.

Wave Pressures and Loads on a Small Scale Model of the Svåheia SSG Pilot Project

DEFF Research Database (Denmark)

Buccino, Mariano; Vicinanza, Diego; Ciardulli, Francesco

2011-01-01

The paper reports on 2D small scale experiments conducted to investigate wave loadings acting on a pilot project of device for the conversion of wave energy into electricity. The conversion concept is based on the overtopping principle and the structure is worldwide known with the acronym SSG....... The hydraulic model tests have been carried out at the LInC laboratory of the University of Naples Federico II using random waves. Results indicate wave overtopping is able to cause a sudden inversion of vertical force under wave crest, so that it is alternatively upward and downward directed over a short time...

Modeling the Buoyancy System of a Wave Energy Power Plant

DEFF Research Database (Denmark)

Pedersen, Tom S.; Nielsen, Kirsten M.

2009-01-01

A nonlinear dynamic model of the buoyancy system in a wave energy power plant is presented. The plant ("Wave Dragon") is a floating device using the potential energy in overtopping waves to produce power. A water reservoir is placed on top of the WD, and hydro turbines lead the water to the sea...... producing electrical power. Through air chambers it is possible to control the level of the WD. It is important to control the level in order to maximize the power production in proportion to the wave height, here the amount of overtopping water and the amount of potential energy is conflicting...

Medical Devices; Neurological Devices; Classification of the External Vagal Nerve Stimulator for Headache. Final order.

Science.gov (United States)

2017-12-27

The Food and Drug Administration (FDA or we) is classifying the external vagal nerve stimulator for headache into class II (special controls). The special controls that apply to the device type are identified in this order and will be part of the codified language for the external vagal nerve stimulator for headache's classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.

Innovative membrane development for fuel cells

CSIR Research Space (South Africa)

Vaivars, G

2011-10-01

Full Text Available The innovative membranes for alternative energy devices will be presented. An electrical car is long waited solution to environmental and fuel supply problems in transport. Most probably, the shift from a combustion engine to an electrical car...

Medical Devices; Clinical Chemistry and Clinical Toxicology Devices; Classification of the Organophosphate Test System. Final order.

Science.gov (United States)

2017-10-18

The Food and Drug Administration (FDA or we) is classifying the organophosphate test system into class II (special controls). The special controls that apply to the device type are identified in this order and will be part of the codified language for the organophosphate test system's classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.

Medical Devices; Hematology and Pathology Devices; Classification of a Cervical Intraepithelial Neoplasia Test System. Final order.

Science.gov (United States)

2018-01-03

The Food and Drug Administration (FDA or we) is classifying the cervical intraepithelial neoplasia (CIN) test system into class II (special controls). The special controls that apply to the device type are identified in this order and will be part of the codified language for the CIN test system's classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.

Lessons from innovation in drug-device combination products.

Science.gov (United States)

Couto, Daniela S; Perez-Breva, Luis; Saraiva, Pedro; Cooney, Charles L

2012-01-01

Drug-device combination products introduced a new dynamic on medical product development, regulatory approval, and corporate interaction that provide valuable lessons for the development of new generations of combination products. This paper examines the case studies of drug-eluting stents and transdermal patches to facilitate a detailed understanding of the challenges and opportunities introduced by combination products when compared to previous generations of traditional medical or drug delivery devices. Our analysis indicates that the largest barrier to introduce a new kind of combination products is the determination of the regulatory center that is to oversee its approval. The first product of a new class of combination products offers a learning opportunity for the regulator and the sponsor. Once that first product is approved, the leading regulatory center is determined, and the uncertainty about the entire class of combination products is drastically reduced. The sponsor pioneering a new class of combination products assumes a central role in reducing this uncertainty by advising the decision on the primary function of the combination product. Our analysis also suggests that this decision influences the nature (pharmaceutical, biotechnology, or medical devices) of the companies that will lead the introduction of these products into the market, and guide the structure of corporate interaction thereon. Copyright © 2011 Elsevier B.V. All rights reserved.

Challenges to value-enhancing innovation in health care delivery: commonalities and contrasts with innovation in drugs and devices

National Research Council Canada - National Science Library

Garber, Steven

2011-01-01

.... More specifically, they argue that policymakers should carefully distinguish between innovative activities that are worth their social costs and activities that are not worth their social costs...

Organizing NPD networks for high innovation performance: the case of Dutch medical devices SMEs

NARCIS (Netherlands)

Pullen, A.J.J.; Groen, Arend J.; de Weerd-Nederhof, Petronella C.; Fisscher, O.A.M.

2010-01-01

This research examines which combination of network characteristics (the network configuration) leads to high innovation performance for small and medium sized companies (SMEs). Even though research has paid significant attention to the relation between the external network and the innovation

Mobile: Letting Go of the Device and Building for Innovation

Science.gov (United States)

Davis, Jim; Rocchio, Rosemary A.

2011-01-01

Mobile use of the Internet is on target to surpass fixed use by 2014. Three-fourths of all college/university students have purchased or intend to purchase an Internet-enabled handheld device within the next year. The smartphone market is changing almost monthly. Attempting to manage even just one or a few "devices" is becoming a lost…

Fueling innovation in medical devices (and beyond): venture capital in health care.

Science.gov (United States)

Ackerly, D Clay; Valverde, Ana M; Diener, Lawrence W; Dossary, Kristin L; Schulman, Kevin A

2009-01-01

Innovation in health care requires new ideas and the capital to develop and commercialize those ideas into products or services. The necessary capital is often "venture capital," but the link between public policy and the venture capital industry has not been well examined. In this paper we explore the link between venture capital and innovation in health care, and we present new descriptive data from a survey of health care venture capital fund managers. Respondents generally viewed policy levers (for example, reimbursement and regulations) as important risks to venture capital investments, potentially affecting their ability to raise capital for early-stage investment funds.

Medical device-related pressure ulcers

Directory of Open Access Journals (Sweden)

Black JM

2016-08-01

Full Text Available Joyce M Black,1 Peggy Kalowes2 1Adult Health and Illness Department, College of Nursing, University of Nebraska Medical Center, Omaha, NE, 2Nursing Research and Innovation, Long Beach Memorial Miller Children’s & Women’s Hospital, Long Beach, CA, USA Abstract: Pressure ulcers from medical devices are common and can cause significant morbidity in patients of all ages. These pressure ulcers appear in the shape of the device and are most often found from the use of oxygen delivery devices. A hospital program designed to reduce the number of pressure ulcers from medical devices was successful. The program involved the development of a team that focused on skin, the results were then published for the staff to track their performance, and it was found that using foam dressings helped reduce the pressure from the device. The incidence of ulcers from medical devices has remained at zero at this hospital since this program was implemented. Keywords: pressure ulcer, medical device related

Team-Based Development of Medical Devices: An Engineering–Business Collaborative

Science.gov (United States)

Eberhardt, Alan W.; Johnson, Ophelia L.; Kirkland, William B.; Dobbs, Joel H.; Moradi, Lee G.

2016-01-01

There is a global shift in the teaching methodology of science and engineering toward multidisciplinary, team-based processes. To meet the demands of an evolving technical industry and lead the way in engineering education, innovative curricula are essential. This paper describes the development of multidisciplinary, team-based learning environments in undergraduate and graduate engineering curricula focused on medical device design. In these programs, students actively collaborate with clinicians, professional engineers, business professionals, and their peers to develop innovative solutions to real-world problems. In the undergraduate senior capstone courses, teams of biomedical engineering (BME) and business students have produced and delivered numerous functional prototypes to satisfied clients. Pursuit of commercialization of devices has led to intellectual property (IP) disclosures and patents. Assessments have indicated high levels of success in attainment of student learning outcomes and student satisfaction with their undergraduate design experience. To advance these projects toward commercialization and further promote innovative team-based learning, a Master of Engineering (MEng) in Design and Commercialization was recently launched. The MEng facilitates teams of graduate students in engineering, life sciences, and business who engage in innovation-commercialization (IC) projects and coursework that take innovative ideas through research and development (R&D) to create marketable devices. The activities are structured with students working together as a “virtual company,” with targeted outcomes of commercialization (license agreements and new start-ups), competitive job placement, and/or career advancement. PMID:26902869

Team-Based Development of Medical Devices: An Engineering-Business Collaborative.

Science.gov (United States)

Eberhardt, Alan W; Johnson, Ophelia L; Kirkland, William B; Dobbs, Joel H; Moradi, Lee G

2016-07-01

There is a global shift in the teaching methodology of science and engineering toward multidisciplinary, team-based processes. To meet the demands of an evolving technical industry and lead the way in engineering education, innovative curricula are essential. This paper describes the development of multidisciplinary, team-based learning environments in undergraduate and graduate engineering curricula focused on medical device design. In these programs, students actively collaborate with clinicians, professional engineers, business professionals, and their peers to develop innovative solutions to real-world problems. In the undergraduate senior capstone courses, teams of biomedical engineering (BME) and business students have produced and delivered numerous functional prototypes to satisfied clients. Pursuit of commercialization of devices has led to intellectual property (IP) disclosures and patents. Assessments have indicated high levels of success in attainment of student learning outcomes and student satisfaction with their undergraduate design experience. To advance these projects toward commercialization and further promote innovative team-based learning, a Master of Engineering (MEng) in Design and Commercialization was recently launched. The MEng facilitates teams of graduate students in engineering, life sciences, and business who engage in innovation-commercialization (IC) projects and coursework that take innovative ideas through research and development (R&D) to create marketable devices. The activities are structured with students working together as a "virtual company," with targeted outcomes of commercialization (license agreements and new start-ups), competitive job placement, and/or career advancement.

An innovative in vitro device providing continuous low doses of γ-rays mimicking exposure to the space environment: A dosimetric study

Science.gov (United States)

Pereda-Loth, V.; Franceries, X.; Afonso, A. S.; Ayala, A.; Eche, B.; Ginibrière, D.; Gauquelin-Koch, G.; Bardiès, M.; Lacoste-Collin, L.; Courtade-Saïdi, M.

2018-02-01

Astronauts are exposed to microgravity and chronic irradiation but experimental conditions combining these two factors are difficult to reproduce on earth. We have created an experimental device able to combine chronic irradiation and altered gravity that may be used for cell cultures or plant models in a ground based facility. Irradiation was provided by thorium nitrate powder, conditioned so as to constitute a sealed source that could be placed in an incubator. Cell plates or plant seedlings could be placed in direct contact with the source or at various distances above it. Moreover, a random positioning machine (RPM) could be positioned on the source to simulate microgravity. The activity of the source was established using the Bateman formula. The spectrum of the source, calculated according to the natural decrease of radioactivity and the gamma spectrometry, showed very good adequacy. The experimental fluence was close to the theoretical fluence evaluation, attesting its uniform distribution. A Monte Carlo model of the irradiation device was processed by GATE code. Dosimetry was performed with radiophotoluminescent dosimeters exposed for one month at different locations (x and y axes) in various cell culture conditions. Using the RPM placed on the source, we reached a mean absorbed dose of gamma rays of (0.33 ± 0.17) mSv per day. In conclusion, we have elaborated an innovative device allowing chronic radiation exposure to be combined with altered gravity. Given the limited access to the International Space Station, this device could be useful to researchers interested in the field of space biology.

INNOVATIVE TECHNOLOGY VERIFICATION REPORT " ...

Science.gov (United States)

The RemediAidTm Total Petroleum Hydrocarbon Starter Kit (RemediAidTm kit) developed by CHEMetries, Inc. (CHEMetrics), and AZUR Environmental Ltd was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in Port Hueneme, California. The purpose of the demonstration was to collect reliable performance and cost data for the RemediAid Tm kit and six other field measurement devices for total petroleum hydrocarbons (TPH) in soil. In addition to assessing ease of device operation, the key objectives of the demonstration included determining the (1) method detection limit, (2) accuracy and precision, (3) effects of interferents and soil moisture content on TPH measurement, (4) sample throughput, and (5) TPH measurement costs for each device. The demonstration involved analysis of both performance evaluation samples and environmental samples collected in five areas contaminated with gasoline, diesel, lubricating oil, or other petroleum products. The performance and cost results for a given field measurement device were compared to those for an off-site laboratory reference method,

Innovating transformative medical devices and growing the local medical device manufacturing sector

CSIR Research Space (South Africa)

Bunn, Tony

2017-01-01

Full Text Available . The 4IR is marked by emerging technology breakthroughs in a number of fields, including robotics, genomics, biosensors and wearables, AI, the internet of things, quantum computing, big data predictive analytics, 3D printing/additive manufacturing... of personalized prosthetics and products • Personalized devices and technologies for precision medicine Secure Airway Clamp for safer Anaesthesia MANDIBULAR IMPLANTS PATIENT 2 PATIENT 1 PATIENT 3 PATIENT CT SCAN 3D PRINTED TITANIUM IMPLANT PROPOSED...

Technological innovations for a sustainable business model in the semiconductor industry

Science.gov (United States)

Levinson, Harry J.

2014-09-01

Increasing costs of wafer processing, particularly for lithographic processes, have made it increasingly difficult to achieve simultaneous reductions in cost-per-function and area per device. Multiple patterning techniques have made possible the fabrication of circuit layouts below the resolution limit of single optical exposures but have led to significant increases in the costs of patterning. Innovative techniques, such as self-aligned double patterning (SADP) have enabled good device performance when using less expensive patterning equipment. Other innovations have directly reduced the cost of manufacturing. A number of technical challenges must be overcome to enable a return to single-exposure patterning using short wavelength optical techniques, such as EUV patterning.

Open innovations, innovation communities and firm's innovative activities

Directory of Open Access Journals (Sweden)

Getejanc Vesna

2016-01-01

Full Text Available The open innovation paradigm emphasizes the fact that firms can improve their performance by opening their business models and reduce their R&D costs by effective incorporation of external knowledge. In other words, companies are able to capture value through knowledge that exists outside the boundaries of their organization. The shift from closed to open model of innovation has imposed the necessity to adopt more open approach to innovation within traditional academic view of business strategy. The adoption of this innovative approach is emphasized even more, by the necessity for stronger connection and cooperation among the participants of the innovation process. Free will and collaboration are the main characteristics of open source software, which is recognized in literature as the role model of open innovation and is a rapidly growing method of technology development. Furthermore, innovative communities represent a great opportunity for improvement of the companies' innovation activities, since they have become an important source for identifying the needs and problems of the users. Their development has been fostered by information technologies and recent social changes in user behavior. Recognizing and better understanding the motivation of the members of the innovation communities that guide them to participate in the process of idea generation, can have significant influence on their incorporation within the innovation process. Equally important is to define the incentives that are suited for stimulating and fostering innovative user activities. Taking this topic in consideration, the purpose of this article is to address the following questions: In what way does the collaboration in open source software projects have positive effect on companies' innovation performance? What are the innovation communities and how can companies establish successful interaction with them? Why does the interaction with innovation communities lead to

High-Fidelity Piezoelectric Audio Device

Science.gov (United States)

Woodward, Stanley E.; Fox, Robert L.; Bryant, Robert G.

2003-01-01

ModalMax is a very innovative means of harnessing the vibration of a piezoelectric actuator to produce an energy efficient low-profile device with high-bandwidth high-fidelity audio response. The piezoelectric audio device outperforms many commercially available speakers made using speaker cones. The piezoelectric device weighs substantially less (4 g) than the speaker cones which use magnets (10 g). ModalMax devices have extreme fabrication simplicity. The entire audio device is fabricated by lamination. The simplicity of the design lends itself to lower cost. The piezoelectric audio device can be used without its acoustic chambers and thereby resulting in a very low thickness of 0.023 in. (0.58 mm). The piezoelectric audio device can be completely encapsulated, which makes it very attractive for use in wet environments. Encapsulation does not significantly alter the audio response. Its small size (see Figure 1) is applicable to many consumer electronic products, such as pagers, portable radios, headphones, laptop computers, computer monitors, toys, and electronic games. The audio device can also be used in automobile or aircraft sound systems.

Left ventricular assist device as destination therapy: application of the payment-by-results approach for the device reimbursement.

Science.gov (United States)

Messori, Andrea; Trippoli, Sabrina; Bonacchi, Massimo; Sani, Guido

2009-08-01

Value-based methods are increasingly used to reimburse therapeutic innovation, and the payment-by-results approach has been proposed for handling interventions with limited therapeutic evidence. Because most left ventricular assist devices are supported by preliminary efficacy data, we examined the effectiveness data of the HeartMate (Thoratec Corp, Pleasanton, CA) device to explore the application of the payment-by-results approach to these devices and to develop a model for handling reimbursements. According to our model, after establishing the societal economic countervalue for each month of life saved, each patient treated with one such device is associated to the payment of this countervalue for every month of survival lived beyond the final date of estimated life expectancy without left ventricular assist devices. Our base-case analysis, which used the published data of 68 patients who received the HeartMate device, was run with a monthly countervalue of euro 5000, no adjustment for quality of life, and a baseline life expectancy of 150 days without left ventricular assist devices. Sensitivity analysis was aimed at testing the effect of quality of life adjustments and changes in life expectancy without device. In our base-case analysis, the mean total reimbursement per patient was euro 82,426 (range, euro 0 to euro 250,000; N = 68) generated as the sum of monthly payments. This average value was close to the current price of the HeartMate device (euro 75,000). Sensitivity testing showed that the base-case reimbursement of euro 82,426 was little influenced by variations in life expectancy, whereas variations in utility had a more pronounced impact. Our report delineates an innovative procedure for appropriately allocating economic resources in this area of invasive cardiology.

Design methodology for wing trailing edge device mechanisms

OpenAIRE

Martins Pires, Rui Miguel

2007-01-01

Over the last few decades the design of high lift devices has become a very important part of the total aircraft design process. Reviews of the design process are performed on a regular basis, with the intent to improve and optimize the design process. This thesis describes a new and innovative methodology for the design and evaluation of mechanisms for Trailing Edge High-Lift devices. The initial research reviewed existing High-Lift device design methodologies and current f...

Maintenance of Traffic for Innovative Geometric Design Work Zones

Science.gov (United States)

2015-12-01

Currently there are no guidelines within the Manual on Uniform Traffic Control Devices (MUTCD) on construction phasing and maintenance of traffic (MOT) for retrofit construction and maintenance projects involving innovative geometric designs. The res...

Perceived Characteristics of E-cigarettes as an Innovation by Young Adults.

Science.gov (United States)

Trumbo, Craig W; Harper, Raquel

2015-03-01

We examined channels through which information about e-cigarettes has flowed, public perception of e-cigarettes as an innovation, and how these may influence use. An online survey of US adults aged 18-24 years (N = 874) was used. Measures included information channels, perception of e-cigarettes as an innovation, and intention to use. Television ranked first for exposure to e-cigarette information. The most positive innovation attributes were observability and relative advantage. A structural model showed that information exposure and favorable perception as an innovation predicted use. The high degree of e-cigarette awareness combined with depiction of the devices as a favorable innovation may contribute to their wider adoption and may argue for regulation of e-cigarette advertising.

Unconventional supercapacitors from nanocarbon-based electrode materials to device configurations.

Science.gov (United States)

Liu, Lili; Niu, Zhiqiang; Chen, Jun

2016-07-25

As energy storage devices, supercapacitors that are also called electrochemical capacitors possess high power density, excellent reversibility and long cycle life. The recent boom in electronic devices with different functions in transparent LED displays, stretchable electronic systems and artificial skin has increased the demand for supercapacitors to move towards light, thin, integrated macro- and micro-devices with transparent, flexible, stretchable, compressible and/or wearable abilities. The successful fabrication of such supercapacitors depends mainly on the preparation of innovative electrode materials and the design of unconventional supercapacitor configurations. Tremendous research efforts have been recently made to design and construct innovative nanocarbon-based electrode materials and supercapacitors with unconventional configurations. We review here recent developments in supercapacitors from nanocarbon-based electrode materials to device configurations. The advances in nanocarbon-based electrode materials mainly include the assembly technologies of macroscopic nanostructured electrodes with different dimensions of carbon nanotubes/nanofibers, graphene, mesoporous carbon, activated carbon, and their composites. The electrodes with macroscopic nanostructured carbon-based materials overcome the issues of low conductivity, poor mechanical properties, and limited dimensions that are faced by conventional methods. The configurational design of advanced supercapacitor devices is presented with six types of unconventional supercapacitor devices: flexible, micro-, stretchable, compressible, transparent and fiber supercapacitors. Such supercapacitors display unique configurations and excellent electrochemical performance at different states such as bending, stretching, compressing and/or folding. For example, all-solid-state simplified supercapacitors that are based on nanostructured graphene composite paper are able to maintain 95% of the original capacity at

Medical Devices; Obstetrical and Gynecological Devices; Classification of the Pressure Wedge for the Reduction of Cesarean Delivery. Final order.

Science.gov (United States)

2017-12-28

The Food and Drug Administration (FDA or we) is classifying the pressure wedge for the reduction of cesarean delivery into class II (special controls). The special controls that apply to the device type are identified in this order and will be part of the codified language for the pressure wedge for the reduction of cesarean delivery's classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.

Innovative design of viscoelastic dampers for seismic mitigation

International Nuclear Information System (INIS)

Tsai, C.S.

1993-01-01

In this paper, an advanced and more reliable design of viscoelastic dampers for seismic mitigation of high-rise buildings is presented. The innovative design of energy-absorbing devices has some advantages, compared to the classical design, as follows: One, the device is directly subjected to shear strains and forces due to story drifts; two, the device can support its own weight during normal operations, and maintain stable for large deformations during earthquakes; three, the device can reduce the responses of a structure to horizontal as well as vertical seismic loadings; and four, the device can also decrease the responses of the floor system of a building. In this study, a ten-story building is given as an example to express the merits obtained from the new system. Comparisons of the building equipped with classical and proposed devices of viscoelastic dampers are carefully studied. Numerical results show that the energy-absorbing capacity of the new device is superior to the classical one, especially for vertical vibrations. (orig.)

Open-source hardware for medical devices.

Science.gov (United States)

Niezen, Gerrit; Eslambolchilar, Parisa; Thimbleby, Harold

2016-04-01

Open-source hardware is hardware whose design is made publicly available so anyone can study, modify, distribute, make and sell the design or the hardware based on that design. Some open-source hardware projects can potentially be used as active medical devices. The open-source approach offers a unique combination of advantages, including reducing costs and faster innovation. This article compares 10 of open-source healthcare projects in terms of how easy it is to obtain the required components and build the device.

Flexible devices: from materials, architectures to applications

Science.gov (United States)

Zou, Mingzhi; Ma, Yue; Yuan, Xin; Hu, Yi; Liu, Jie; Jin, Zhong

2018-01-01

Flexible devices, such as flexible electronic devices and flexible energy storage devices, have attracted a significant amount of attention in recent years for their potential applications in modern human lives. The development of flexible devices is moving forward rapidly, as the innovation of methods and manufacturing processes has greatly encouraged the research of flexible devices. This review focuses on advanced materials, architecture designs and abundant applications of flexible devices, and discusses the problems and challenges in current situations of flexible devices. We summarize the discovery of novel materials and the design of new architectures for improving the performance of flexible devices. Finally, we introduce the applications of flexible devices as key components in real life. Project supported by the National Key R&D Program of China (Nos. 2017YFA0208200, 2016YFB0700600, 2015CB659300), the National Natural Science Foundation of China (Nos. 21403105, 21573108), and the Fundamental Research Funds for the Central Universities (No. 020514380107).

Computer Independent Data Transfer Device

Directory of Open Access Journals (Sweden)

Darshana Rarath

2017-07-01

Full Text Available In today’s era, transferring data among distinct storage devices has become one of the tasks which are done most frequently. In order to make data and information omnipresent, it needs to be shared anywhere and anytime. However the reliance of user on a PC or laptop for the same is not efficient. This paper is about the innovative way to overcome this restriction. This paper discusses the development of a portable device with the use of wired and wireless communication applications to share data and information among distinct storage devices without relying on a PC or a laptop. The proposed device is compact, comprises of a touch screen, power source and is capable of transferring all types of files. Hence, it eliminates the dependence on a PC or a laptop for transferring data.

Technological Innovations from NASA

Science.gov (United States)

Pellis, Neal R.

2006-01-01

The challenge of human space exploration places demands on technology that push concepts and development to the leading edge. In biotechnology and biomedical equipment development, NASA science has been the seed for numerous innovations, many of which are in the commercial arena. The biotechnology effort has led to rational drug design, analytical equipment, and cell culture and tissue engineering strategies. Biomedical research and development has resulted in medical devices that enable diagnosis and treatment advances. NASA Biomedical developments are exemplified in the new laser light scattering analysis for cataracts, the axial flow left ventricular-assist device, non contact electrocardiography, and the guidance system for LASIK surgery. Many more developments are in progress. NASA will continue to advance technologies, incorporating new approaches from basic and applied research, nanotechnology, computational modeling, and database analyses.

Device Physics of Narrow Gap Semiconductors

CERN Document Server

Chu, Junhao

2010-01-01

Narrow gap semiconductors obey the general rules of semiconductor science, but often exhibit extreme features of these rules because of the same properties that produce their narrow gaps. Consequently these materials provide sensitive tests of theory, and the opportunity for the design of innovative devices. Narrow gap semiconductors are the most important materials for the preparation of advanced modern infrared systems. Device Physics of Narrow Gap Semiconductors offers descriptions of the materials science and device physics of these unique materials. Topics covered include impurities and defects, recombination mechanisms, surface and interface properties, and the properties of low dimensional systems for infrared applications. This book will help readers to understand not only the semiconductor physics and materials science, but also how they relate to advanced opto-electronic devices. The last chapter applies the understanding of device physics to photoconductive detectors, photovoltaic infrared detector...

« Change » Rhetoric as innovation device in Tunisian

Directory of Open Access Journals (Sweden)

Mohamed Ali ELHAOU

2010-01-01

Full Text Available Proponents of the “Tunisia change” toward structural unemployment of young graduates highlight the “change’s era” as a unique innovative solution. In this publicity process, the Democratic Constitutional Rally (RCD partystate plays a major communicative role. It acts indeed the same way as a huge communication agency. The party, internally, will have the responsibility to promote the presidential actions on the ground. Externally, in a gradually globalized world market where suitcaseconcepts such as “good” or “new governance”, “democratic transition”, “sustainable development” and “information society” are plentiful, the RCD’s role is therefore to be a catch-all rhetoric.

Metrological Reliability of Medical Devices

Science.gov (United States)

Costa Monteiro, E.; Leon, L. F.

2015-02-01

The prominent development of health technologies of the 20th century triggered demands for metrological reliability of physiological measurements comprising physical, chemical and biological quantities, essential to ensure accurate and comparable results of clinical measurements. In the present work, aspects concerning metrological reliability in premarket and postmarket assessments of medical devices are discussed, pointing out challenges to be overcome. In addition, considering the social relevance of the biomeasurements results, Biometrological Principles to be pursued by research and innovation aimed at biomedical applications are proposed, along with the analysis of their contributions to guarantee the innovative health technologies compliance with the main ethical pillars of Bioethics.

Failure of Grass Covered Flood Defences with Roads on Top Due to Wave Overtopping: A Probabilistic Assessment Method

Directory of Open Access Journals (Sweden)

Juan P. Aguilar-López

2018-06-01

Full Text Available Hard structures, i.e., roads, are commonly found over flood defences, such as dikes, in order to ensure access and connectivity between flood protected areas. Several climate change future scenario studies have concluded that flood defences will be required to withstand more severe storms than the ones used for their original design. Therefore, this paper presents a probabilistic methodology to assess the effect of a road on top of a dike: it gives the failure probability of the grass cover due to wave overtopping over a wide range of design storms. The methodology was developed by building two different dike configurations in computational fluid dynamics Navier–Stokes solution software; one with a road on top and one without a road. Both models were validated with experimental data collected from field-scale experiments. Later, both models were used to produce data sets for training simpler and faster emulators. These emulators were coupled to a simplified erosion model which allowed testing storm scenarios which resulted in local scouring conditioned statistical failure probabilities. From these results it was estimated that the dike with a road has higher probabilities (5 × 10−5 > Pf >1 × 10−4 of failure than a dike without a road (Pf < 1 × 10−6 if realistic grass quality spatial distributions were assumed. The coupled emulator-erosion model was able to yield realistic probabilities, given all the uncertainties in the modelling process and it seems to be a promising tool for quantifying grass cover erosion failure.

Progress in JT-60 innovative technologies

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-09-01

This review report provides the synthetic archives of innovative technologies in 20-year facility developments for the large tokamak experimental device JT-60, first founded as the major magnetic fusion device in the Second Basic Program for Fusion Research and Development of Japan. Manufacture of JT-60 was started in 1978, and the first plasma was achieved on April 8, 1985. In 1989-1991, the vacuum vessel and poloidal field coils were entirely reconfigured to improve the plasma performance. The major original mission of the JT-60 project, a breakeven condition for a D-T equivalent plasma, was finally attained in 1996. After this, JT-60, as a leading device for magnetic fusion research in the world, continues to challenge many experimental issues, which has been achieved by collaboration of innovative facility developments and experimental improvements. In addition, at this time to start the ITER construction phase in 2005, this review is expected to contribute the construction and operation activities for the next generation tokamak by providing the basic ideas in facility developments. We classified a tremendous number of development items into the selected sections for this review. Since the authors have been in charge of each development activity of their own, the contents are full of essential stories, points, and keywords in spite of its compact handbook size. We believe this review could provide highly sophisticated, informative ideas matured in JT-60 technological developments. (author)

Designing innovative retractors and devices to facilitate mitral valve repair surgery

OpenAIRE

Okamoto, Kazuma; Yozu, Ryohei

2015-01-01

Various devices have been developed to facilitate mitral valve surgery, including those that improve mitral valve exposure and assist surgeons with associated procedures. Choosing appropriate supporting devices when performing minimally invasive mitral valve surgery (MIMVS) through a minithoracotomy with endoscopic assistance is critical. Depending on the surgeon’s preference, trans-thoracic or trans-working-port left atrial retractors can be utilized. Although the trans-thoracic retractors p...

Progesterone-releasing devices for cattle estrus induction and synchronization: Device optimization to anticipate shorter treatment durations and new device developments.

Science.gov (United States)

de Graaff, W; Grimard, B

2018-05-01

Synchronization programs using progesterone-releasing intravaginal devices that allow for fixed time artificial insemination are still finding increasing application in bovine reproduction. This practice is useful for rationalizing livestock management because an increased number of cows can be inseminated in one session without the need for estrus detection. Although much of the innovation related to the design and development of intravaginal devices for use in cattle took place in the previous century, progress in understanding the physiology of the bovine estrous cycle resulted in shorter treatment durations, a trend which is still continuing. In this competitive market, with little functional differentiation between the existing devices, the shorter treatment duration prompted for optimization of the progesterone content in the device, as the cost of the drug significantly contributes to the price per unit. For CIDR ® a reduction of the progesterone content of about 30 per cent was realized. Price reduction remained an important target for further device development. Next to reduction of progesterone content, cheaper and easier to process materials like polyethylene vinyl acetate (EVA) copolymers have been explored to replace the commonly used silicone elastomers. The reengineering effort of CIDR ® demonstrated that knowledge of release kinetics and insight into gradual depletion patterns in the device is critical for optimization of drug content without compromising performance (blood levels). More recent publications related to the use of alternative polymers like EVA and polyisoprene (IP) indicated encouraging results regarding further reduction of progesterone content. The use of EVA seems most promising, because it is in principle a low-cost polymer available in many grades and this thermoplastic polymer can be processed easily by means of commonly used techniques like injection molding and extrusion. The use of thermoplastic polymers, however, requires

Left Ventricular Assist Devices: The Adolescence of a Disruptive Technology.

Science.gov (United States)

Pinney, Sean P

2015-10-01

Clinical outcomes for patients with advanced heart failure receiving left ventricular assist devices are driven by appropriate patient selection, refined surgical technique, and coordinated medical care. Perhaps even more important is innovative pump design. The introduction and widespread adoption of continuous-flow ventricular assist devices has led to a paradigm shift within the field of mechanical circulatory support, making the promise of lifetime device therapy closer to reality. The disruption caused by this new technology, on the one hand, produced meaningful improvements in patient survival and quality of life, but also introduced new clinical challenges, such as bleeding, pump thrombosis, and acquired valvular heart disease. Further evolution within this field will require financial investment to sustain innovation leading to a fully implantable, durable, and cost-effective pump for a larger segment of patients with advanced heart failure. Copyright © 2015 Elsevier Inc. All rights reserved.

Smart space technology innovations

CERN Document Server

Chen, Mu-Yen

2013-01-01

Recently, ad hoc and wireless communication technologies have made available the device, service and information rich environment for users. Smart Space and ubiquitous computing extend the ""Living Lab"" vision of everyday objects and provide context-awareness services to users in smart living environments. This ebook investigates smart space technology and its innovations around the Living Labs. The final goal is to build context-awareness smart space and location-based service applications that integrate information from independent systems which autonomously and securely support human activ

A magnetorheological clutch for efficient automotive auxiliary device actuation

Directory of Open Access Journals (Sweden)

F. Bucchi

2013-01-01

Full Text Available In this paper the results of a project funded by Regione Toscana aimed at reducing the power absorption of auxiliary devices in vehicles are presented. In particular the design, testing and application of a magnetorheological clutch (MR is proposed, aimed at disengaging the vacuum pump, which draws in air from the power-brake booster chamber, in order to reduce the device power absorption. Several clutch preliminary studies done to choose the clutch geometry and the magnetic field supply are illustrated. The final choice consisted in an MR clutch with permanent magnet, which satisfied size, torque and fail-safe specifications. The clutch characteristics, in terms of torque versus slip, were obtained experimentally for three different clutch prototypes on an ad-hoc developed test bench.As result of a preliminary simulation, a comparison between the power absorption of a current production vacuum pump, an innovative vacuum pump and both vacuum pumps coupled with the MR clutch is presented. The New European Driving Cycle is considered for simulating the vacuum pump operation both in urban and highway driving. Results show that the use of the innovative vacuum pump reduces the device consumption of about 35%, whereas the use of MR clutch coupled with the innovative vacuum pump reduces it up to about 44% in urban driving and 50% in highway driving.

75 FR 62844 - Innovations in Technology for the Treatment of Diabetes: Clinical Development of the Artificial...

Science.gov (United States)

2010-10-13

... state of device systems for autonomous systems for the treatment of diabetes mellitus, the challenges in...] Innovations in Technology for the Treatment of Diabetes: Clinical Development of the Artificial Pancreas (an... a public workshop entitled ``Innovations in Technology for the Treatment of Diabetes: Clinical...

NASA Johnson Space Center SBIR STTR Program Technology Innovations

Science.gov (United States)

Krishen, Kumar

2007-01-01

The Small Business Innovation Research (SBIR) Program increases opportunities for small businesses to participate in research and development (R&D), increases employment, and improves U.S. competitiveness. Specifically the program stimulates U.S. technological innovation by using small businesses to meet federal R&D needs, increasing private-sector commercialization of innovations derived from federal R&D, and fostering and encouraging the participation of socially disadvantaged businesses. In 2000, the Small Business Technology Transfer (STTR) Program extended and strengthened the SBIR Program, increasing its emphasis on pursuing commercial applications by awarding contracts to small business concerns for cooperative R&D with a nonprofit research institution. Modeled after the SBIR Program, STTR is nevertheless a separately funded activity. Technologies that have resulted from the Johnson Space Center SBIR STTR Program include: a device for regenerating iodinated resin beds; laser-assisted in-situ keratomileusis or LASIK; a miniature physiological monitoring device capable of collecting and analyzing a multitude of real-time signals to transmit medical data from remote locations to medical centers for diagnosis and intervention; a new thermal management system for fibers and fabrics giving rise to new line of garments and thermal-enhancing environments; and a highly electropositive material that attracts and retains electronegative particles in water.

Wave Dragon MW

DEFF Research Database (Denmark)

Kofoed, Jens Peter; Frigaard, Peter

Wave Dragon is a wave energy converter of the overtopping type. The device has been thoroughly tested on a 1:51.8 scale model in wave laboratories and a 1:4.5 scale model deployed in Nissum Bredning, a large inland waterway in Denmark. Based on the experience gained a full scale, multi MW prototype...

A review of the value of innovation in inhalers for COPD and asthma.

Science.gov (United States)

Virchow, Johann Christian; Akdis, Cezmi A; Darba, Josep; Dekhuijzen, Richard; Hartl, Sylvia; Kobelt, Gisela; Roger, Albert; Simoens, Steven; Toumi, Mondher; Woodhouse, Ben; Plich, Adam; Torvinen, Saku

2015-01-01

Appropriate use of inhaled therapies for asthma and chronic obstructive pulmonary disease (COPD) is critical to ensuring good patient outcomes, efficient use of healthcare resources and limiting the effects of high-morbidity. The appropriate choice of inhaler and active therapy, incorporating patient preferences, can help improve treatment adherence and long-term outcomes. Despite this, many current inhalers are non-intuitive to use, and require extensive training. In this review, an expert panel considers the evidence for the use of inhaler devices in management of COPD and asthma. The panel also evaluates the value of innovation in inhaler technologies, which optimise the use of existing molecules from a clinical, economic and societal perspective. The panel conclusion is that there remains a substantial unmet need in inhaler technology and that innovation in inhaler devices can provide real-world health benefits to patients. Furthermore, we recommend that these innovations should be supported by healthcare systems through appropriate pricing and reimbursement mechanisms.

Uptake and diffusion of medical technology innovation in Europe: what role for funding and procurement policies?

OpenAIRE

Torbica, Aleksandra; Cappellaro, Giulia

2010-01-01

The producers of medical technology constantly strive to innovate and to improve their products for the benefit of patients. With each new generation of devices enabling less invasive techniques, better clinical outcomes and reduced recovery times, patients are direct beneficiaries of this commitment to innovation. Innovation and patient access to technology are inseparably linked with each national health system's respective coverage, procurement and reimbursement policies. If a particular i...

The Use of Balanced Scorecard in Implementation of the User-Driven Innovation Concept

Directory of Open Access Journals (Sweden)

Marzena KRAWCZYK

2015-12-01

Full Text Available Customers play a crucial role in innovation processes. Their importance is proved by numerous theories and innovation models which put users and clients in the heart of innovation processes. One of the newest concept, popular in Scandinavian countries, picking up this thread is the User–Driven Innovation (UDI. To increase probability of innovation success consumers must be involved in the firm’s business model / innovation strategy, becoming a part of the innovation processes and all other stakeholders should be aware of the significance and character of the linkage between customer and company. As a result, building, implementing and monitoring of the customer–oriented innovation strategy should take place. The Balanced Scorecard (BSC may turn out to be very helpful in achieving the above. The aim of this paper is to show that BSC may be a device of implementing the User–Driven Innovation concept, helping to understand UDI assumptions and the role of customers in creating value. Examples of strategic goals and performance indicators presented in this paper may be used by enterprises, which intend to build UDI-based BSC.

Medical innovation laws: an unnecessary innovation.

Science.gov (United States)

Richards, Bernadette

2016-06-01

Objective This paper aims to demonstrate that any suggestion that there is a need for specific innovation laws is flawed. Innovation is central to good medical practice and is adequately supported by current law. Methods The paper reviews the nature of medical innovation and outlines recent attempts in the UK to introduce specific laws aimed at 'encouraging' and 'supporting' innovation. The current legal framework is outlined and the role of the law in relation to medical innovation explored. Results The analysis demonstrates the cyclic relationship between medical advancement and the law and concludes that there is no requirement for specific innovation laws. Conclusions The law not only supports innovation and development in medical treatment but encourages it as central to a functioning medical system. There is no need to introduce specific laws aimed at medical innovation; to do so represents an unnecessary legal innovation and serves to complicate matters. What is known about the topic? Over recent months, there has been a great deal of discussion surrounding the law in the context of medical innovation. This was driven by the attempts in the UK to introduce specific laws in the Medical Innovation Bill. The general subject matter - negligence and the expected standard of care in the provision of treatment - is very well understood, but not in cases where the treatment can be described as innovative. The general rhetoric in both the UK and Australia around the Medical Innovation Bill demonstrates a lack of understanding of the position of the law with regards to innovative treatment. What does this paper add? This paper adds clarity to the debate. It presents the law and explains the manner in which the law can operate around innovative treatment. The paper asserts that medical innovation is both supported and encouraged by existing legal principles. What are the implications for practitioners? The paper presents an argument that can guide the policy position

Nanomedical device and systems design challenges, possibilities, visions

CERN Document Server

2014-01-01

Nanomedical Device and Systems Design: Challenges, Possibilities, Visions serves as a preliminary guide toward the inspiration of specific investigative pathways that may lead to meaningful discourse and significant advances in nanomedicine/nanotechnology. This volume considers the potential of future innovations that will involve nanomedical devices and systems. It endeavors to explore remarkable possibilities spanning medical diagnostics, therapeutics, and other advancements that may be enabled within this discipline. In particular, this book investigates just how nanomedical diagnostic and

Practical skills of the future innovator

Science.gov (United States)

Kaurov, Vitaliy

2015-03-01

Physics graduates face and often are disoriented by the complex and turbulent world of startups, incubators, emergent technologies, big data, social network engineering, and so on. In order to build the curricula that foster the skills necessary to navigate this world, we will look at the experiences at the Wolfram Science Summer School that gathers annually international students for already more than a decade. We will look at the examples of projects and see the development of such skills as innovative thinking, data mining, machine learning, cloud technologies, device connectivity and the Internet of things, network analytics, geo-information systems, formalized computable knowledge, and the adjacent applied research skills from graph theory to image processing and beyond. This should give solid ideas to educators who will build standard curricula adapted for innovation and entrepreneurship education.

Industrialized Innovation: The Connection of Science & Technology Innovation with Industrial Innovation

Institute of Scientific and Technical Information of China (English)

Yinxing Hong; Yao Lu; Jianghuai Zheng

2017-01-01

In light of the relationship and the current disconnection between science & technology (S&T) innovation and industrial innovation in China,it is necessary to put forward and emphasize the concept of industrialized innovation.Industrialized innovation is the bridge and intermediation between S&T innovation and industrial innovation,which is not only a concept,but also a mechanism and combination force.There are two ways to achieve industrialized innovation:through industry-university-research coordination and through technology entrepreneurship.The meaning of industry-university-research coordination is not about coordination among industry,university and research sectors in an institutional sense;rather it is about the coordination of the functions of cultivation and development in new industries,new technologies,and new talents of industrialized innovation.The incentive mechanism for industrialized innovation should motivate not only innovation but also coordination.Technology entrepreneurship is the industrialization of new technology through business start-ups,which occurs beyond the stage of incubation and development of new technology.The capital of technology entrepreneurship is the set consisting of knowledge capital manifested through technological innovation,human capital manifested through entrepreneurs,and physical capital in the form of venture capital.While physical capital is indispensable,knowledge capital and human capital play the decisive role in technology entrepreneurship.The industrialization of technological innovation involves two requirements:one is to enable the new technology industry to achieve a large scale rapidly,and the other is to fully realize the potential value of the new technology.Both requirements are reliant on effective innovation in business models.

Business model innovation in the water sector in developing countries.

Science.gov (United States)

Gebauer, Heiko; Saul, Caroline Jennings

2014-08-01

Various technologies have been deployed in household devices or micro-water treatment plants for mitigating fluoride and arsenic, and thereby provide safe and affordable drinking water in low-income countries. While the technologies have improved considerably, organizations still face challenges in making them financially sustainable. Financial sustainability questions the business models behind these water technologies. This article makes three contributions to business models in the context of fluoride and arsenic mitigation. Firstly, we describe four business models: A) low-value devices given away to people living in extreme poverty, B) high-value devices sold to low-income customers, C) communities as beneficiaries of micro-water treatment plants and D) entrepreneurs as franchisees for selling water services and highlight the emergence of hybrid business models. Secondly, we show current business model innovations such as cost transparency & cost reductions, secured & extended water payments, business diversification and distribution channels. Thirdly, we describe skills and competencies as part of capacity building for creating even more business model innovations. Together, these three contributions will create more awareness of the role of business models in scaling-up water treatment technologies. Copyright © 2014 Elsevier B.V. All rights reserved.

[Innovative technology and blood safety].

Science.gov (United States)

Begue, S; Morel, P; Djoudi, R

2016-11-01

If technological innovations are not enough alone to improve blood safety, their contributions for several decades in blood transfusion are major. The improvement of blood donation (new apheresis devices, RFID) or blood components (additive solutions, pathogen reduction technology, automated processing of platelets concentrates) or manufacturing process of these products (by automated processing of whole blood), all these steps where technological innovations were implemented, lead us to better traceability, more efficient processes, quality improvement of blood products and therefore increased blood safety for blood donors and patients. If we are on the threshold of a great change with the progress of pathogen reduction technology (for whole blood and red blood cells), we hope to see production of ex vivo red blood cells or platelets who are real and who open new conceptual paths on blood safety. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

The Innovation Hyperlab: a Physical and Curriculum Framework for Fostering Innovation From Grade School to Grad School

Science.gov (United States)

Tagg, Randall

2014-03-01

A versatile laboratory for open innovation has been created in a former auto-shop-instruction building adjacent to Gateway High School in the Aurora Public Schools district in Colorado. We have equipped this 2500 square foot space with resources to support fifty-two technologies, such as mechanical design, electronics, optics, and nanotechnology. Correspondingly, we are developing a web site to provide modular instruction around each of these technologies. The goal is to enable collaborations of secondary school students, university students, teachers, professors, and industry partners in an environment richly supported by both physical and educational resources. An Innovation Academy is currently in progress in the lab with projects such as surgery in zero-G and using music to script the motion of actuator arrays in robots and rehabilitation devices.

Examining Mobile Technology in Higher Education: Handheld Devices in and out of the Classroom

Science.gov (United States)

Mueller, Julie; Wood, Eileen; De Pasquale, Domenica; Cruikshank, Ruth

2012-01-01

This study followed an innovative introduction of mobile technology (i.e., BlackBerry® devices) to a graduate level business program and documented students' use of the technology from the time students received the devices to the end of their first term of study. Students found the BlackBerry® device easy to use, and were optimistic regarding its…

Biodesign process and culture to enable pediatric medical technology innovation.

Science.gov (United States)

Wall, James; Wynne, Elizabeth; Krummel, Thomas

2015-06-01

Innovation is the process through which new scientific discoveries are developed and promoted from bench to bedside. In an effort to encourage young entrepreneurs in this area, Stanford Biodesign developed a medical device innovation training program focused on need-based innovation. The program focuses on teaching systematic evaluation of healthcare needs, invention, and concept development. This process can be applied to any field of medicine, including Pediatric Surgery. Similar training programs have gained traction throughout the United States and beyond. Equally important to process in the success of these programs is an institutional culture that supports transformative thinking. Key components of this culture include risk tolerance, patience, encouragement of creativity, management of conflict, and networking effects. Copyright © 2015 Elsevier Inc. All rights reserved.

Toward biomaterial-based implantable photonic devices

Directory of Open Access Journals (Sweden)

Humar Matjaž

2017-03-01

Full Text Available Optical technologies are essential for the rapid and efficient delivery of health care to patients. Efforts have begun to implement these technologies in miniature devices that are implantable in patients for continuous or chronic uses. In this review, we discuss guidelines for biomaterials suitable for use in vivo. Basic optical functions such as focusing, reflection, and diffraction have been realized with biopolymers. Biocompatible optical fibers can deliver sensing or therapeutic-inducing light into tissues and enable optical communications with implanted photonic devices. Wirelessly powered, light-emitting diodes (LEDs and miniature lasers made of biocompatible materials may offer new approaches in optical sensing and therapy. Advances in biotechnologies, such as optogenetics, enable more sophisticated photonic devices with a high level of integration with neurological or physiological circuits. With further innovations and translational development, implantable photonic devices offer a pathway to improve health monitoring, diagnostics, and light-activated therapies.

Innovative reregulation weirs for dam releases

International Nuclear Information System (INIS)

Hauser, G.E.; Shane, R.M.; Niznik, J.A.; Brock, W.G.

1991-01-01

In this paper two different reregulation weir designs for dam release improvement are discussed. A porous timber crib is favored for applications where increased minimum flow is needed, and a labyrinth with vertical walls is favored where both minimum flow and aeration are needed. Weirs constructed below hydropower dams can improve minimum flows between generating periods and increase tailwater dissolved oxygen (DO) content during generation. TVA has developed two distinct functional designs: a timber crib weir for minimum flow and a labyrinth weir for minimum flow and aeration. A target minimum flow is sustained by slow drainage of the weir pool between periodic refills. With the labyrinth weir, aeration occurs during generation via overtopping. Both weirs are designed to maximize the value of the tailwater while minimizing backwater on the upstream turbine, unsafe hydraulic conditions, and environmental disturbance

Progress in high-efficient solution process organic photovoltaic devices fundamentals, materials, devices and fabrication

CERN Document Server

Li, Gang

2015-01-01

This book presents an important technique to process organic photovoltaic devices. The basics, materials aspects and manufacturing of photovoltaic devices with solution processing are explained. Solution processable organic solar cells - polymer or solution processable small molecules - have the potential to significantly reduce the costs for solar electricity and energy payback time due to the low material costs for the cells, low cost and fast fabrication processes (ambient, roll-to-roll), high material utilization etc. In addition, organic photovoltaics (OPV) also provides attractive properties like flexibility, colorful displays and transparency which could open new market opportunities. The material and device innovations lead to improved efficiency by 8% for organic photovoltaic solar cells, compared to 4% in 2005. Both academic and industry research have significant interest in the development of this technology. This book gives an overview of the booming technology, focusing on the solution process fo...

Where are All the Female Innovators? Nurses as Innovators in a Public Sector Innovation

Directory of Open Access Journals (Sweden)

Johanna Nählinder

2010-03-01

Full Text Available The field of innovation does not see the innovator and is therefore gender-blind. Still, there is an implicit understanding of who is innovative, and this understanding includes gender and profession of the innovator. The female nurse is not seen as innovative and few innovation policies target her. The lack of innovativeness is due to many factors and two of these are tested empirically in this article: that women work in professions which are not associated with innovation and that women lack confidence to carry out innovative work. The empirical investigation presents evidence in line with both hypothesis and also notes that men and women ends their innovative efforts for different reasons. Therefore, innovation policy targeting these groups mobilises otherwise dormant potential innovators.

An assessment of long-term overtopping risk and optimal termination time of dam under climate change.

Science.gov (United States)

Lee, Bau-Shian; You, Gene Jiing-Yun

2013-05-30

Reservoir management faces a wide range of new challenges resulting from the impact of climate change. One set of challenges arises from the non-stationary nature of hydrological conditions. Another crucial issue is watershed sedimentation, which can significantly influence the sustainability and safety of reservoirs. To address these concerns, this study developed a framework for the management of reservoir risk. An analytical conceptual model coupling physical governing relationships and economic tools was proposed, which was then applied to the Shihmen Reservoir in Taiwan. We adopted a statistical representation of future hydrologic conditions with the assumption of time-variant moments and focused on evaluating the impact of an increase in the frequency of extreme hydrological events caused by climate change and used a stochastic approach to quantify the risk factors. Our results confirm that this approach can be used to identify reservoir-related risks and generate appropriate options for strategy and policy. We determined that the major source of risk is the hydrological conditions, especially the extreme events. More severe intra-annual climatic change is much more dominant in the risk compared to inter-year trends. The influence of reservoir characteristics on risk is associated mainly with the availability of flood control capacity, but limited due to the limitation of its volume and potential to regulate the flow. Engineering may provide an option for mitigating the risk, but integrated, watershed-level approaches, such as providing systematic detention or land use management, are better suited to reducing the storm peak from a long-term perspective. With a critical increase in the risk of overtopping, a high probability of dam failure and corresponding losses may precipitate the need to retire or remove the facility. However, because the benefits and costs are both huge, the decision may be biased by a conservative attitude. The outcome of small

Innovation af innovation

DEFF Research Database (Denmark)

Harste, Gorm

2009-01-01

, at innovation af innovationen forsøges gennemført på en måde, hvor tiden kræves at forholde sig til sin egen tidslighed i form af fremtid, nutid, fortid og ikke mindst i form af samtidighed. I tiden skal vi iagttage, hvordan vi iagttager tiden. Vi dobbelt-koder tiden på samme måde, som forskning forsker i...... organisationssystemerne. De to typer systemer kan noget helt bestemt med fænomenet tid. De kan synkronisere. Analyseres organisationssystemer ser vi, imidlertid at innovation kræver ro. Stærkt innovative systemer er militærsystemet og kunstsystemet, der også inddrages, og hvor vi ser paradokset mellem innovation og...... involution. Tid er med et medium og ikke et lufttomt rum. Tid er end ikke en gasart, men udgør et solidt fluidum, som samfundet bader i og flyder i, konstant i bevægelse. Reformer forudsætter former, og innovation forudsætter involution. Kun sådan muliggøres evolution....

Miniaturized tools and devices for bioanalytical applications: an overview

DEFF Research Database (Denmark)

Chudy, M.; Grabowska, I.; Ciosek, P.

2009-01-01

This article presents an overview of various miniaturized devices and technologies developed by our group. Innovative, fast and cheap procedures for the fabrication of laboratory microsystems based on commercially available materials are reported and compared with well-established microfabricatio...... optic detectors, potentiometric sensors platforms, microreactors and capillary electrophoresis (CE) microchips as well as integrated microsystems e. g. double detection microanalytical systems, devices for studying enzymatic reactions and a microsystem for cell culture and lysis....

Video Browsing on Handheld Devices

Science.gov (United States)

Hürst, Wolfgang

Recent improvements in processing power, storage space, and video codec development enable users now to playback video on their handheld devices in a reasonable quality. However, given the form factor restrictions of such a mobile device, screen size still remains a natural limit and - as the term "handheld" implies - always will be a critical resource. This is not only true for video but any data that is processed on such devices. For this reason, developers have come up with new and innovative ways to deal with large documents in such limited scenarios. For example, if you look at the iPhone, innovative techniques such as flicking have been introduced to skim large lists of text (e.g. hundreds of entries in your music collection). Automatically adapting the zoom level to, for example, the width of table cells when double tapping on the screen enables reasonable browsing of web pages that have originally been designed for large, desktop PC sized screens. A multi touch interface allows you to easily zoom in and out of large text documents and images using two fingers. In the next section, we will illustrate that advanced techniques to browse large video files have been developed in the past years, as well. However, if you look at state-of-the-art video players on mobile devices, normally just simple, VCR like controls are supported (at least at the time of this writing) that only allow users to just start, stop, and pause video playback. If supported at all, browsing and navigation functionality is often restricted to simple skipping of chapters via two single buttons for backward and forward navigation and a small and thus not very sensitive timeline slider.

Short term wave forecasting, using digital filters, for improved control of Wave Energy Converters

DEFF Research Database (Denmark)

Tedd, James; Frigaard, Peter

2007-01-01

This paper presents a Digital Filter method for real time prediction of waves incident upon a Wave Energy device. The method transforms waves measured at a point ahead of the device, to expected waves incident on the device. The relationship between these incident waves and power capture is derived...... experimentally. Results are shown form measurements taken on the Wave Dragon prototype device, a floating overtopping device situated in Northern Denmark. In this case the method is able to accurately predict the surface elevation at the device 11.2 seconds before the measurement is made. This is sufficient...... to allow advanced control systems to be developed using this knowledge to significantly improve power capture....

Short term wave forecasting, using digital filters, for improved control of Wave Energy Converters

Energy Technology Data Exchange (ETDEWEB)

Tedd, J.; Frigaard, P. [Department of Civil Engineering, Aalborg University, Aalborg (Denmark)

2007-07-01

This paper presents a Digital Filter method for real time prediction of waves incident upon a Wave Energy device. The method transforms waves measured at a point ahead of the device, to expected waves incident on the device. The relationship between these incident waves and power capture is derived experimentally. Results are shown form measurements taken on the Wave Dragon prototype device, a floating overtopping device situated in Northern Denmark. In this case the method is able to accurately predict the surface elevation at the device 11.2 seconds before the measurement is made. This is sufficient to allow advanced control systems to be developed using this knowledge to significantly improve power capture.

Innovative Ge Quantum Dot Functional Sensing and Metrology Devices

Science.gov (United States)

2017-08-21

Sensing/Metrology Devices Period: May 26th 2015May 25th 2017 Investigators: Pei-Wen Li Affiliation: Department of Electrical Engineering , National...light sources as well as low-power, high-speed Ge photodetectors indeed requires the growth of direct-gap Ge, heterostructure engineering for...All these tasks cannot be simply conducted in terms of bulk Ge technology, and it is no doubt that nanoscience and nanotechnology would offer

Purchasing medical innovation the right technology, for the right patient, at the right price

CERN Document Server

Robinson, James C

2015-01-01

Innovation in medical technology generates a remarkable supply of new drugs, devices, and diagnostics that improve health, reduce risks, and extend life. But these technologies are too often used on the wrong patient, in the wrong setting, or at an unaffordable price. The only way to moderate the growth in health care costs without undermining the dynamic of medical innovation is to improve the process of assessing, pricing, prescribing, and using new technologies. Purchasing Medical Innovation analyzes the contemporary revolution in the purchasing of health care technology, with a focus on th

Extraglottic airway devices: technology update

Directory of Open Access Journals (Sweden)

Sharma B

2017-08-01

Full Text Available Bimla Sharma, Chand Sahai, Jayashree Sood Department of Anaesthesiology, Pain and Perioperative Medicine, Sir Ganga Ram Hospital, New Delhi, India Abstract: Extraglottic airway devices (EADs have revolutionized the field of airway management. The invention of the laryngeal mask airway was a game changer, and since then, there have been several innovations to improve the EADs in design, functionality, safety and construction material. These have ranged from changes in the shape of the mask, number of cuffs and material used, like rubber, polyvinylchloride and latex. Phthalates, which were added to the construction material in order to increase device flexibility, were later omitted when this chemical was found to have serious adverse reproductive outcomes. The various designs brought out by numerous companies manufacturing EADs resulted in the addition of several devices to the airway market. These airway devices were put to use, many of them with inadequate or no evidence base regarding their efficacy and safety. To reduce the possibility of compromising the safety of the patient, the Difficult Airway Society (DAS formed the Airway Device Evaluation Project Team (ADEPT to strengthen the evidence base for airway equipment and vet the new extraglottic devices. A preuse careful analysis of the design and structure may help in better understanding of the functionality of a particular device. In the meantime, the search for the ideal EAD continues. Keywords: extraglottic airway devices, laryngeal mask airway, other extraglottic airway devices, safety, technology update

A training paradigm to enhance performance and safe use of an innovative neuroendovascular device

NARCIS (Netherlands)

Ricci, D.R.; Marotta, T.R.; Riina, H.A.; Wan, M.; Vries, J. de

2016-01-01

Training has been important to facilitate the safe use of new devices designed to repair vascular structures. This paper outlines the generic elements of a training program for vascular devices and uses as an example the actual training requirements for a novel device developed for the treatment of

Innovation, systemic appropriation and prevention in the granite mining sector: The case of humidification.

Science.gov (United States)

Mendes, R W B; Pueyo, V; Béguin, P; Duarte, F J C M

2017-01-01

This research was conducted in the Brazilian granite mining sector. After epidemiological studies, it was established that professional pneumoconiosis is related to the inhalation of dust. Therefore, the Brazilian mining health and safety regulatory standard made it compulsory to provide humidification throughout the extraction and mineral treatment processes. To develop the concept of systemic appropriation of the technological innovations that aim to protect the worker's health. Until now, appropriation has usually been presented in its individual dimensions. In this article, the focus is placed on the collective and organizational aspects of this appropriation. Two methodological approaches were used: interviews with the different individuals involved in order to report the history of the implementation of technical devices which meet the humidification norm; and ergonomic analysis of the work of the operators who used these devices. The appropriation of the technical devices occurred at two distinct levels: 1) Individual, related to the direct contact of the operator with the instrument; 2) Systemic, as the effects of the innovation propagated through the system affecting interdependent tasks, adaptation of the work organization and new production strategies. The implementation of prevention norms require innovations which are necessarily accompanied by transformations in the companies' techniques, work and management.

Innovation

DEFF Research Database (Denmark)

Nielsen, Janni; Yaganeh, Suzanne; Bloch Rasmussen, Leif

2013-01-01

This paper contributes to a theoretical discussion of creation of innovation with participants in, or outside, organisations. We address the creation of innovation with a complex theoretical understanding drawing on the Scandinavian and the Participatory Design tradition introducing two approaches...... to the processes of innovation. We ask if innovation can be initiated and enhanced looking at two collaborative approaches; participatory innovation (PIN) and cooperative innovation (COIN). We invite to dialogue and reflections on PIN’s conflict and creative frictions on one side and COIN’s complexity......, complementarity in diversity and the didactic scaffolding of the innovation process on the other side. Our contribution focuses on the methods and practices for facilitation of co-creating activities between different groups leading to cooperation, and innovation in thinking....

The power of disruptive technological innovation: Transcatheter aortic valve implantation.

Science.gov (United States)

Berlin, David B; Davidson, Michael J; Schoen, Frederick J

2015-11-01

We sought to evaluate the principles of disruptive innovation, defined as technology innovation that fundamentally shifts performance and utility metrics, as applied to transcatheter aortic valve implantation (TAVI). In particular, we considered implantation procedure, device design, cost, and patient population. Generally cheaper and lower performing, classical disruptive innovations are first commercialized in insignificant markets, promise lower margins, and often parasitize existing usage, representing unattractive investments for established market participants. However, despite presently high unit cost, TAVI is less invasive, treats a "new," generally high risk, patient population, and is generally done by a multidisciplinary integrated heart team. Moreover, at least in the short-term TAVI has not been lower-performing than open surgical aortic valve replacement in high-risk patients. We conclude that TAVI extends the paradigm of disruptive innovation and represents an attractive commercial opportunity space. Moreover, should the long-term performance and durability of TAVI approach that of conventional prostheses, TAVI will be an increasingly attractive commercial opportunity. © 2014 Wiley Periodicals, Inc.

Innovation in abutment-free bone-anchored hearing devices in children: Updated results and experience.

Science.gov (United States)

Baker, Shaun; Centric, Aaron; Chennupati, Sri Kiran

2015-10-01

Bone-anchored hearing devices are an accepted treatment option for hearing restoration in various types of hearing loss. Traditional devices have a percutaneous abutment for attachment of the sound processor that contributes to a high complication rate. Previously, our institution reported on the Sophono (Boulder, CO, USA) abutment-free system that produced similar audiologic results to devices with abutments. Recently, Cochlear Americas (Centennial, CO, USA) released an abutment-free bone-anchored hearing device, the BAHA Attract. In contrast to the Sophono implant, the BAHA Attract utilizes an osseointegrated implant. This study aims to demonstrate patient benefit abutment-free devices, compare the results of the two abutment-free devices, and examine complication rates. A retrospective chart review was conducted for the first eleven Sophono implanted patients and for the first six patients implanted with the BAHA Attract at our institution. Subsequently, we analyzed patient demographics, audiometric data, clinical course and outcomes. Average improvement for the BAHA Attract in pure-tone average (PTA) and speech reception threshold (SRT) was 41dB hearing level (dBHL) and 56dBHL, respectively. Considering all frequencies, the BAHA Attract mean improvement was 39dBHL (range 32-45dBHL). The Sophono average improvement in PTA and SRT was 38dBHL and 39dBHL, respectively. The mean improvement with Sophono for all frequencies was 34dBHL (range 24-43dBHL). Significant improvements in both pure-tone averages and speech reception threshold for both devices were achieved. In direct comparison of the two separate devices using the chi-square test, the PTA and SRT data between the two devices do not show a statistically significant difference (p-value 0.68 and 0.56, respectively). The complication rate for these abutment-free devices is lower than that of those featuring the transcutaneous abutment, although more studies are needed to further assess this potential advantage

Developing a new treatment device: how to get an idea to the marketplace.

Science.gov (United States)

Dymond, Elizabeth; Long, Adele; McCarthy, Avril; Drake, Marcus J

2012-04-01

A good idea does not inevitably lead to successful innovation; it needs additional "drivers" and coherent activity of a specialized team. The initial idea needs proof-of-concept and prototype testing. Alongside, market review must anticipate future need and competitors, and ensure that no current patents are infringed. The likelihood that reimbursement will be secured and that health systems will "adopt" the device has to be considered. Intellectual property (IP) protection is needed to maintain sole rights to exploit the core concept. Non-disclosure agreements (NDA) should be put in place, and commercial considerations should be remembered before any disclosure in the public domain, including publications. Prospective business partners will review the concept from many perspectives, including stage of device development, effective IP protection, any clinical trial evidence, and whether the device aligns with their business strategy. Royalties arising from sales of a marketed device are distributed to all parties contributing to its development; the party bearing the greater financial burden of developing the final product will gain the greater share of royalties. The innovator's employer will have a call on proceeds if the idea arose in the course of employment. All stages of development require fastidious documentation to meet requirements of the regulatory authorities responsible for permitting use in patients. Specific regulatory requirements depend on which region(s) of the world the device will be marketed in. This review explains all stages of the innovation pathway from concept to adoption, giving practical advice and signposting expertise relevant to each stage. Copyright © 2011 Wiley Periodicals, Inc.

From Innovation Community to Community Innovation User-initiated Innovation in Wireless Leiden

NARCIS (Netherlands)

van Oost, Elizabeth C.J.; Verhaegh, Stefan; Oudshoorn, Nelly E.J.

2009-01-01

The role of users in innovation processes has gained increasing attention in innovation studies, technology studies, and media studies. Scholars have identified users and use practices as a source of innovation. So far, however, little insight has been generated in innovation processes in which

Process antecedents of challenging, under-cover and readily-adopted innovations.

Science.gov (United States)

Adams, Richard; Tranfield, David; Denyer, David

2013-01-01

The purpose of the study is to test the utility of a taxonomy of innovation based on perceived characteristics in the context of healthcare by exploring the extent to which discrete innovation types could be distinguished from each other in terms of process antecedents. A qualitative approach was adopted to explore the process antecedents of nine exemplar cases of "challenging", "under-cover" and "readily-adopted" healthcare innovations. Data were collected by semi-structured interview and from secondary sources, and content analysed according to a theoretically informed framework of innovation process. Cluster analysis was applied to determine whether innovation types could be distinguished on the basis of process characteristics. The findings provide moderate support for the proposition that innovations differentiated on the basis of the way they are perceived by potential users exhibit different process characteristics. Innovations exhibiting characteristics previously believed negatively to impact adoption may be successfully adopted but by a different configuration of processes than by innovations exhibiting a different set of characteristics. The findings must be treated with caution because the sample consists of self-selected cases of successful innovation and is limited by sample size. Nevertheless, the study sheds new light on important process differences in healthcare innovation. The paper offers a heuristic device to aid clinicians and managers to better understand the relatively novel task of promoting and managing innovation in healthcare. The paper advances the argument that there is under-exploited opportunity for cross-disciplinary organisational learning for innovation management in the NHS. If efficiency and quality improvement targets are to be met through a strategy of encouraging innovation, it may be advantageous for clinicians and managers to reflect on what this study found mostly to be absent from the processes of the innovations studied

Design Innovation and Fashion Cycles.

OpenAIRE

Pesendorfer, Wolfgang

1995-01-01

A model of fashion cycles is developed in which fashion is used as a signalling device in a "dating-game". We assume that there is a designer (monopolist) who can create new designs at a positive fixed cost and zero marginal cost. Designs are durable commodities. We show the existence of equilibria of the following form: Every T periods a new design is innovated. Over time the price of the design falls and it spreads to more and more agents. Once sufficiently many agents own the design it is ...

Sustainable Innovation: A Competitive Advantage for Innovation Ecosystems

OpenAIRE

Oksanen, Kaisa; Hautamäki, Antti

2015-01-01

In this article, we elaborate the emerging concept of sustainable innovation and analyze the relevance of innovation as a means to solve wicked problems and enhancing sustainable well-being. We also examine the changing conditions for innovation creation: building global knowledge hubs and local innovation ecosystems. As a result, the drivers of innovation and opportunities to utilize the untapped innovation potential of people outside traditional innovation contexts are expand...

Radiological Medical Device Innovation: Approvals via the Premarket Approval Pathway From 2000 to 2015.

Science.gov (United States)

Ghobadi, Comeron W; Hayman, Emily L; Finkle, Joshua H; Walter, Jessica R; Xu, Shuai

2017-01-01

The aim of this study was to critically assess the clinical evidence leading to radiologic medical device approvals via the premarket approval pathway from 2000 to 2015. This study used the publically available FDA premarket database for radiologic device approvals over the past 15 years (September 1, 2000, to August 31, 2015). Approval characteristics were collected for each device, and statistical analysis was performed on the data for each pivotal trial. Additionally, methodological quality of the pivotal trial was determined using the Quality Assessment of Diagnostic Accuracy Studies tool. Twenty-three class III radiologic device approvals were identified, with breast imaging accounting for 16 (70%) and computer-aided detection software accounting for 9 (39%) approvals. The median premarket approval time was 475 days (range, 180-1,116). Twenty-one devices were approved on the basis of multireader, multicenter studies, one on the basis of a randomized controlled trial, and one on the basis of a preclinical technical equivalence trial. The median number of patients per pivotal trial was 201 (range, 25-3,946). Twenty-six of the 34 pivotal trials (76%) had at least one methodologic bias. Breast imaging devices had a greater number of patients per pivotal trial (P = .009) and more prospective studies. With regard to all modalities, increased time to device approval correlated with weaker trial quality (r = 0.600, P assessing diagnostic technologies. Given that radiologic devices play a key role in modern medicine, further efforts should be made to increase transparency of clinical data leading to approval. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Group Innovation Ability of Agricultural Technological Innovation Strategic Alliance

Institute of Scientific and Technical Information of China (English)

Chishun; MA; Jintian; YU

2013-01-01

Agricultural technological innovation strategic alliance, as an important form of strategic alliance, has steadily strengthened the collaborative management among organizations and raised competitive power with the backing of improved group innovation ability. This article studies innovation ability from individual innovation ability to the group innovation ability. Firstly, basic connotation of group innovation ability is to be concluded through the comparison of individual and group innovation ability. Secondly, evaluation index system is to be established based on the influencing factors of the group innovation ability of agricultural technological innovation strategic alliance and evaluation is based on three dimensions, namely organization technological innovation ability, alliance collaborative innovation ability as well as innovation environment. Furthermore, basic methods for promoting the group innovation ability of alliance are to be proposed.

Overtopping of Berm Breakwaters Evaluation of Overtopping Formula

DEFF Research Database (Denmark)

Andersen, Thomas Lykke; Burcharth, H. F.

2005-01-01

The berm breakwater concept is basicly rather old, but was not used very much until it was “reinvented” in the early 1980’ties, when a slope protection for an airfield runway extending into the sea in the Alutian Islands, Alaska was designed.......The berm breakwater concept is basicly rather old, but was not used very much until it was “reinvented” in the early 1980’ties, when a slope protection for an airfield runway extending into the sea in the Alutian Islands, Alaska was designed....

Consumer sleep tracking devices: a critical review.

Science.gov (United States)

Lee, Jeon; Finkelstein, Joseph

2015-01-01

Consumer sleep tracking devices are widely advertised as effective means to monitor and manage sleep quality and to provide positive effects on overall heath. However objective evidence supporting these claims is not always readily available. The goal of this study was to perform a comprehensive review of available information on six representative sleep tracking devices: BodyMedia FIT, Fitbit Flex, Jawbone UP, Basis Band, Innovative Sleep Solutions SleepTracker, and Zeo Sleep Manager Pro. The review was conducted along the following dimensions: output metrics, theoretical frameworks, systematic evaluation, and FDA clearance. The review identified a critical lack of basic information about the devices: five out of six devices provided no supporting information on their sensor accuracy and four out of six devices provided no information on their output metrics accuracy. Only three devices were found to have related peer-reviewed articles. However in these articles wake detection accuracy was revealed to be quite low and to vary widely (BodyMedia, 49.9±3.6%; Fitbit, 19.8%; Zeo, 78.9% to 83.5%). No supporting evidence on how well tracking devices can help mitigate sleep loss and manage sleep disturbances in practical life was provided.

Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

Science.gov (United States)

2010-10-01

American Telemedicine Association), we demonstrated how continuous monitoring of the patient’s SpO2 and respiratory rate could detect the onset of...designed to monitor sepsis infection sounded its alarm continually, day and night. The device was built with an innovative algorithm to detect sepsis, but...transport Figure 3. This medical device has misread its sensors and inserted false data into patient’s permanent medical record. SPECIal FEaTuRE October

Open innovation with an effective open innovation team.

OpenAIRE

Vanvoorden, Jonas

2014-01-01

This master's thesis explores how open innovation teams can successfully support open innovation inside of an organisation. Open innovation is a paradigm introduced by Henry Chesbrough (2003) a decade ago. It expands the innovation potential of organisations by opening them up to new ways of working with external partners. To implement open innovation, many companies rely on a small group of managers named open innovation teams. Although open innovation teams can potentially be vital for impl...

An Innovative Treatment Strategy to Counteract Retroactive Forces In Bimaxillary Dentoalveolar Cases

Directory of Open Access Journals (Sweden)

Reena R Kumar

2010-01-01

This paper presents a case report of a 30 yrs old male patient with Class I Bimaxillary Protrusion treated using innovative lingual forces with a labial appliance (without any additional intraoral or extraoral anchorage devices effectively with negligible anchorage loss.

Economic Aspects of Innovations in Energy Storage

OpenAIRE

Strielkowski, Wadim; Lisin, Evgeny

2017-01-01

Energy storage is emerging as a potential method for addressing global energy system challenges across many different application areas. However, there are technical and non-technical barriers to the widespread deployment of energy storage devices. With regard to the above, it seems crucial to identify innovation processes, mechanisms and systems (in a broad sense) that can allow energy storage to help meet energy system challenges, and also deliver industrial growth from technology developme...

An open source device for operant licking in rats.

Science.gov (United States)

Longley, Matthew; Willis, Ethan L; Tay, Cindy X; Chen, Hao

2017-01-01

We created an easy-to-use device for operant licking experiments and another device that records environmental variables. Both devices use the Raspberry Pi computer to obtain data from multiple input devices (e.g., radio frequency identification tag readers, touch and motion sensors, environmental sensors) and activate output devices (e.g., LED lights, syringe pumps) as needed. Data gathered from these devices are stored locally on the computer but can be automatically transferred to a remote server via a wireless network. We tested the operant device by training rats to obtain either sucrose or water under the control of a fixed ratio, a variable ratio, or a progressive ratio reinforcement schedule. The lick data demonstrated that the device has sufficient precision and time resolution to record the fast licking behavior of rats. Data from the environment monitoring device also showed reliable measurements. By providing the source code and 3D design under an open source license, we believe these examples will stimulate innovation in behavioral studies. The source code can be found at http://github.com/chen42/openbehavior.

Cognitive Inference Device for Activity Supervision in the Elderly

OpenAIRE

Mishra, Nilamadhab; Lin, Chung-Chih; Chang, Hsien-Tsung

2014-01-01

Human activity, life span, and quality of life are enhanced by innovations in science and technology. Aging individual needs to take advantage of these developments to lead a self-regulated life. However, maintaining a self-regulated life at old age involves a high degree of risk, and the elderly often fail at this goal. Thus, the objective of our study is to investigate the feasibility of implementing a cognitive inference device (CI-device) for effective activity supervision in the elderly....

Service innovations breaking institutionalized rules of health care

DEFF Research Database (Denmark)

Wallin, Arto; Fuglsang, Lars

2017-01-01

.e. regulations, normative rules, and cultural-cognitive beliefs) protecting the field by introducing digitally enabled service innovations into health care markets. Design/methodology/approach – The study is qualitative and interpretative in nature and utilizes case study as a research strategy. The paper...... is based on data that were collected through narrative interviews and document analysis from seven new ventures participating in a start-up accelerator program. Findings – Results indicate that service innovations that require a change in the institutional structures of the health care system are enacted...... through three highly iterative key processes: institutional sensemaking that creates an understanding of prevailing institutional arrangements and that constructs meaning for institutional change efforts, theorization of change through linguistic device, and modifications of institutions by building...

Innovation Processes and Entrepreneurial Culture for Radical Innovations

Directory of Open Access Journals (Sweden)

Ľubica Knošková

2015-02-01

Full Text Available To survive and prosper, the organizations need to embed the processes and mechanisms to discover major technology and consumer trends and respond to them through new growth areas. Based on profound literature review providing insight into organizational factors that affect firms’ ability to manage innovation this paper asks which innovation processes and entrepreneurial culture support radical innovations. The aim of the paper is to specify the company behaviour that leads to innovative outputs with high level of novelty in country specific context of Slovakia. We conducted two-stage empirical research in 2009 and 2014 mapping companies’ approach to innovation management during the last 10 years. After surveying 102 firms in the first stage and 287 firms in the second stage we derive success factors for radical innovations. The findings demonstrate growing importance of corporate strategic orientation, highly developed innovation processes and parallel mechanisms for radical innovation, ability to manage internally and externally open innovation and support entrepreneurial culture. This study makes unique contribution to the understanding of innovation processes, organizational factors, and their significance and dynamics. It should attract managerial attention to recognize the importance of innovation management factors for building firm’s innovation competency.

Development and validation of the downhole freestanding shear device (DFSD) for measuring the dynamic properties of clay.

Science.gov (United States)

2008-12-01

The Downhole Freestanding Shear Device (DFSD) is an innovative tool developed for in situ measurement of dynamic : properties (modulus and damping) of clay soils over a broad range of strains. The device essentially performs : laboratory-quality tors...

An innovative accelerator-driven inertial electrostatic confinement device using converging ion beams

International Nuclear Information System (INIS)

Bauer, T. H.; Wigeland, R. A.

1999-01-01

Fundamental physics issues facing development of fusion power on a small-scale are assessed with emphasis on the idea of Inertial Electrostatic Confinement (IEC). The authors propose a new concept of accelerator-driven IEC fusion, termed Converging Beam Inertial Electrostatic Confinement (CB-IEC). CB-IEC offers a number of innovative features that make it an attractive pathway toward resolving fundamental physics issues and assessing the ultimate viability of the IEC concept for power generation

EFFECT OF CORPORATE INNOVATION ABILITY ON THE CHOICE BETWEEN PRODUCT INNOVATION AND PROCESS INNOVATION

OpenAIRE

Zeng Wu; Tian Zhilong

2010-01-01

With the method of duopoly game theory, the effect of firms’ innovation ability on the choice between product and process innovation is studied. The concept of cost coefficient of product innovation is introduced, and the criterion equation for the innovation type is derived. The following conclusions are made: the more the product innovation ability, the more the possibility for the firms to carry out the product innovation in both the Bertrand and the Cournot competitions. Wi...

eWALL Innovation for Smart e-Health Monitoring Devices

DEFF Research Database (Denmark)

Mihovska, Albena Dimitrova; Kyriazakos, Sofoklis

2017-01-01

E-health environments should be designed to provide personalized services and applications to their primary users (i.e. the patients) by breaking the barrier of technology acceptance and addressing their daily needs, under strict regulation and security constraints. A typical scenario would employ...... wireless and wired sensors and local or cloud-based processing units to collect, process, store and communicate data related to the patients’ needs and condition. E-health devices can be located on the patients’ bodies or immediate environments to monitor and interact with the patients, while they perform...

Design control considerations for biologic-device combination products.

Science.gov (United States)

Anderson, Dave; Liu, Roger; Anand Subramony, J; Cammack, Jon

2017-03-01

Combination products are therapeutic and diagnostic medical products that combine drugs, devices, and/or biological products with one another. Historically, biologics development involved identifying efficacious doses administered to patients intravenously or perhaps by a syringe. Until fairly recently, there has been limited focus on developing an accompanying medical device, such as a prefilled syringe or auto-injector, to enable easy and more efficient delivery. For the last several years, and looking forward, where there may be little to distinguish biologics medicines with relatively similar efficacy profiles, the biotechnology market is beginning to differentiate products by patient-focused, biologic-device based combination products. As innovative as biologic-device combination products are, they can pose considerable development, regulatory, and commercialization challenges due to unique physicochemical properties and special clinical considerations (e.g., dosing volumes, frequency, co-medications, etc.) of the biologic medicine. A biologic-device combination product is a marriage between two partners with "cultural differences," so to speak. There are clear differences in the development, review, and commercialization processes of the biologic and the device. When these two cultures come together in a combination product, developers and reviewers must find ways to address the design controls and risk management processes of both the biologic and device, and knit them into a single entity with supporting product approval documentation. Moreover, digital medicine and connected health trends are pushing the boundaries of combination product development and regulations even further. Despite an admirable cooperation between industry and FDA in recent years, unique product configurations and design features have resulted in review challenges. These challenges have prompted agency reviewers to modernize consultation processes, while at the same time, promoting

Workplace innovation, social innovation and social quality

NARCIS (Netherlands)

Oeij, P.R.A.; Dhondt, S.; Korver, T.

2011-01-01

Social innovation is becoming a core value of the EU flagship initiative Innovation Union, but it is not clearly demarcated as it covers a wide field of topics. To understand social innovation within European policymaking a brief outline is given of EC policy developments on innovation and on

Device Innovation and Material Challenges at the Limits of CMOS Technology

Science.gov (United States)

Solomon, P. M.

2000-08-01

Scaling of the predominant silicon complementary metal-oxide semiconductor (CMOS) technology is finally approaching an end after decades of exponential growth. This review explores the reasons for this limit and some of the strategies available to the semiconductor industry to continue the technology extension. Evolutionary change to the silicon transistor will be pursued as long as possible, with increasing demands being placed on materials. Eventually new materials such a silicon-germanium may be used, and new device topologies such as the double-gated transistor may be employed. These strategies are being pursued in research organizations today. It is likely that planar technology will reach its limit with devices on the 10-nm scale, and then the third dimension will have to be exploited more efficiently to achieve further performance and density improvements.

Avoiding pitfalls in the road from idea to certified product (and the harsh clinical environment thereafter) when innovating medical devices

NARCIS (Netherlands)

Wieringa, F.P.; Poley M.J.; Dumay, A.C.M.; Steen, A.F.W. van der

2007-01-01

Innovation in medical technology is a critical chain of events, ideally leading to an improved situation for patient and staff as well as a nice profit for the supplier of the innovation. Unfortunately many innovative ideas are not successful in practice. This is often due to lack of: • Medical

Innovation

Science.gov (United States)

EPA frames innovation as critical to the protection of human health and the environment through initiatives such as sustainable practices, innovative research, prize competitions, innovation awards, partnerships, and community activities.

Innovating urinary catheter design: An introduction to the engineering challenge.

Science.gov (United States)

Murphy, Cathy

2018-05-01

Every day, people around the world rely on intermittent and indwelling urinary catheters to manage bladder dysfunction, but the potential or actual harm caused by these devices is well-recognised. Current catheter designs can cause urinary tract infection and septicaemia, bladder and urethral trauma and indwelling devices frequently become blocked. Furthermore, the devices can severely disrupt users' lives, limiting their daily activities and can be costly to manage for healthcare providers. Despite this, little significant design innovation has taken place in the last 80 years. In this article current catheter designs and their limitations are reviewed, common catheter-associated problems are outlined and areas of design ripe for improvement proposed. The potential to relieve the individual and economic burden of catheter use is high.

Innovative learning for innovation

NARCIS (Netherlands)

Dr.Ir. Hay Geraedts

2010-01-01

Introduction Innovation is crucial for companies who have to react to constantly changing markets. Several national and European research institutes stress the importance of developing innovation for small and medium size enterprises (SMEs). This was a trigger to design a minor on strategic

Cognitive Inference Device for Activity Supervision in the Elderly

Directory of Open Access Journals (Sweden)

Nilamadhab Mishra

2014-01-01

Full Text Available Human activity, life span, and quality of life are enhanced by innovations in science and technology. Aging individual needs to take advantage of these developments to lead a self-regulated life. However, maintaining a self-regulated life at old age involves a high degree of risk, and the elderly often fail at this goal. Thus, the objective of our study is to investigate the feasibility of implementing a cognitive inference device (CI-device for effective activity supervision in the elderly. To frame the CI-device, we propose a device design framework along with an inference algorithm and implement the designs through an artificial neural model with different configurations, mapping the CI-device’s functions to minimise the device’s prediction error. An analysis and discussion are then provided to validate the feasibility of CI-device implementation for activity supervision in the elderly.

Branching innovation, recombinant innovation, and endogenous technological transitions

NARCIS (Netherlands)

Frenken, K.; Izquierdo, L.; Zeppini, P.

2012-01-01

We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

A device to ease grid coating for EM autoradiography

International Nuclear Information System (INIS)

Riboni, L.; Nunez-Duran, H.

1991-01-01

A modification to the standard device used to hold grids during the process of coating with emulsion for EM autoradiography is described. The device has a plastic base with six bronze poles attached. Each has a groove machined along its side to the top, and a shallow depression at the end of the groove. Instructions for the construction of the poles and for use of the device are given. The innovative design allows the user to feel the top of the pole, and thus simplifies selection of the coated grids. As grids are less exposed to safe light than in the standard procedure, the background of silver grains decreases; also the chance of missing a grid decreases. (author)

EXOS research on master controllers for robotic devices

Science.gov (United States)

Marcus, Beth A.; An, Ben; Eberman, Brian

1992-01-01

Two projects are currently being conducted by EXOS under the Small Business Innovation Research (SBIR) program with NASA. One project will develop a force feedback device for controlling robot hands, the other will develop an elbow and shoulder exoskeleton which can be integrated with other EXOS devices to provide whole robot arm and hand control. Aspects covered are the project objectives, important research issues which have arisen during the developments, and interim results of the projects. The Phase 1 projects currently underway will result in hardware prototypes and identification of research issues required for complete system development and/or integration.

Semiconductor terahertz technology devices and systems at room temperature operation

CERN Document Server

Carpintero, G; Hartnagel, H; Preu, S; Raisanen, A

2015-01-01

Key advances in Semiconductor Terahertz (THz) Technology now promises important new applications enabling scientists and engineers to overcome the challenges of accessing the so-called "terahertz gap".  This pioneering reference explains the fundamental methods and surveys innovative techniques in the generation, detection and processing of THz waves with solid-state devices, as well as illustrating their potential applications in security and telecommunications, among other fields. With contributions from leading experts, Semiconductor Terahertz Technology: Devices and Systems at Room Tempe

Innovative, wearable snap connector technology for improved device networking in electronic garments

Science.gov (United States)

Kostrzewski, Andrew A.; Lee, Kang S.; Gans, Eric; Winterhalter, Carole A.; Jannson, Tomasz P.

2007-04-01

This paper discusses Physical Optics Corporation's (POC) wearable snap connector technology that provides for the transfer of data and power throughout an electronic garment (e-garment). These connectors resemble a standard garment button and can be mated blindly with only one hand. Fully compatible with military clothing, their application allows for the networking of multiple electronic devices and an intuitive method for adding/removing existing components from the system. The attached flexible cabling also permits the rugged snap connectors to be fed throughout the standard webbing found in military garments permitting placement in any location within the uniform. Variations of the snap electronics/geometry allow for integration with USB 2.0 devices, RF antennas, and are capable of transferring high bandwidth data streams such as the 221 Mbps required for VGA video. With the trend towards providing military officers with numerous electronic devices (i.e., heads up displays (HMD), GPS receiver, PDA, etc), POC's snap connector technology will greatly improve cable management resulting in a less cumbersome uniform. In addition, with electronic garments gaining widespread adoption in the commercial marketplace, POC's technology is finding applications in such areas as sporting good manufacturers and video game technology.

Innovative safety ideas for fusion experimental machines

International Nuclear Information System (INIS)

Brereton, S.J.; Gouge, M.; Piet, S.J.; Merrill, B.J.; Holland, D.F.; Sze, D.K.

1990-01-01

Throughout the early stages of design of fusion experimental devices, such as ITER, safety experts have worked with designers to incorporate safety features into the design. Recent efforts have focused on passive safety features. Although designs of near-term fusion machines may appear consistent with expected regulatory requirements, the safety characteristics can potentially be more attractive. Here, a variety of suggestions that appear promising in terms of improving safety are given. These include new concepts, innovative technologies, further support of past concepts, and possible modification to operating scenarios. Some technical discussion on the feasibility of the proposals is provided. The ideas are generally conceptual at this stage and require further assessment and development work. However, each has the potential for enhancing the safety of experimental devices. 33 refs., 6 figs., 9 tabs

Strengthening regional innovation through network-based innovation brokering

OpenAIRE

Svare, Helge; Gausdal, Anne Haugen

2015-01-01

The primary objective of this paper is to demonstrate how regional innovation system theory may be translated into manageable micro-level methods with the potential for strengthening the productive dynamics of a regional innovation system. The paper meets this objective by presenting network-based innovation brokering (NBIB), a practical method designed using insights from regional innovation system theory and trust theory. Five cases from two Norwegian regional innovation networks show that ...

Internal Determinants of Product Innovation and Management Innovation

OpenAIRE

Harder, Mie

2011-01-01

This paper adopts a behavioral theory of the firm perspective in order to compare the antecedents of two types of innovation: Management innovation refers to the adoption of new management practices or organizational structures, whereas product innovation refers to the introduction of new products or services on the market. The study further distinguishes between two categories of innovation within each type: new to the firm and new to the industry innovations. The findings indica...

Improving lives using multidisciplinary education: partnering to benefit community, innovation, health, and technology.

Science.gov (United States)

McClelland, Molly; Kleinke, Darrell

2013-07-01

University students are trained in specific disciplines, which can benefit disabled individuals in a variety of ways, including education, health promotion, assistive technologies, logistics, or design improvement. However, collaboration with other disciplines can have a greater impact on improving the health of disabled individuals than can training in one discipline alone. The University of Detroit Mercy Colleges of Engineering and Nursing have partnered to develop and provide assistive devices to disabled individuals while teaching innovation, technology, and collaboration to students. After 4 years of developing and implementing our multidisciplinary program, numerous unique and helpful assistive devices have been designed, created, and delivered to individuals in our community. More nursing schools should initiate multidisciplinary programs to train and prepare students for workplaces where such innovative, collaborative skills are increasingly sought. Nurses need to be at the forefront of such collaborative work. Copyright 2013, SLACK Incorporated.

Devices of Responsibility: Over a Decade of Responsible Research and Innovation Initiatives for Nanotechnologies.

Science.gov (United States)

Shelley-Egan, Clare; Bowman, Diana M; Robinson, Douglas K R

2017-10-10

Responsible research and innovation (RRI) has come to represent a change in the relationship between science, technology and society. With origins in the democratisation of science, and the inclusion of ethical and societal aspects in research and development activities, RRI offers a means of integrating society and the research and innovation communities. In this article, we frame RRI activities through the lens of layers of science and technology governance as a means of characterising the context in which the RRI activity is positioned and the goal of those actors promoting the RRI activities in shaping overall governance patterns. RRI began to emerge during a time of considerable deliberation about the societal and governance challenges around nanotechnology, in which stakeholders were looking for new ways of integrating notions of responsibility in nanotechnology research and development. For this reason, this article focuses on nanotechnology as the site for exploring the evolution and growth of RRI.

Description of the Power Take-off System on board the Wave Dragon Prototype

DEFF Research Database (Denmark)

Kofoed, Jens Peter; Frigaard, Peter; Knapp, Wilfried

2005-01-01

The paper describes the power take-off system of the overtopping based wave energy converter Wave Dragon (WD). Focus is put on the hydro turbine arrangement used for the extraction of the potential energy in the water obtained by wave overtopping of the ramp into the reservoir.......The paper describes the power take-off system of the overtopping based wave energy converter Wave Dragon (WD). Focus is put on the hydro turbine arrangement used for the extraction of the potential energy in the water obtained by wave overtopping of the ramp into the reservoir....

[Industry regulation and its relationship to the rapid marketing of medical devices].

Science.gov (United States)

Matsuoka, Atsuko

2012-01-01

In the market of medical devices, non-Japanese products hold a large part even in Japan. To overcome this situation, the Japanese government has been announcing policies to encourage the medical devices industry, such as the 5-year strategy for medical innovation (June 6, 2012). The Division of Medical Devices has been contributing to rapid marketing of medical devices by working out the standards for approval review and accreditation of medical devices, guidances on evaluation of medical devices with emerging technology, and test methods for biological safety evaluation of medical devices, as a part of practice in the field of regulatory science. The recent outcomes are 822 standards of accreditation for Class II medical devices, 14 guidances on safety evaluation of medical devices with emerging technology, and the revised test methods for biological safety evaluation (MHLW Notification by Director, OMDE, Yakushokuki-hatsu 0301 No. 20 "Basic Principles of Biological Safety Evaluation Required for Application for Approval to Market Medical Devices").

Preparation and Characterization of Electrochemical Devices for Energy Storage and Debonding

OpenAIRE

Leijonmarck, Simon

2013-01-01

Within the framework of this thesis, three innovative electrochemical devices have been studied. A part of the work is devoted to an already existing device, laminates which are debonded by the application of a voltage. This type of material can potentially be used in a wide range of applications, including adhesive joints in vehicles to both reduce the total weight and to simplify the disassembly after end-of-life, enabling an inexpensive recycling process. Although already a functioning dev...

Workplace innovation and social innovation : an introduction

NARCIS (Netherlands)

Jürgen Howaldt; Dr. Ben Fruytier; Peter R.A. Oeij; Steven Dhondt

2016-01-01

This is the introduction to the special issue of World Review of Entrepreneurship, Management and Sustainable Development (WREMSD) dedicated to workplace innovation and social innovation related to work and organisation. As technological and business model innovations alone are not sufficient to

Workplace innovation and social innovation: an introduction

NARCIS (Netherlands)

Howaldt, J.; Oeij, P.R.A.; Dhondt, S.; Fruytier, B.

2016-01-01

This is the introduction to this special issue of World Review of Entrepreneurship, Management and Sustainable Development (WREMSD) dedicated to workplace innovation and social innovation related to work and organisation. As technological and business model innovations alone are not sufficient to

World-First Innovations in an Open Innovation Context

OpenAIRE

Hochleitner, Franciane Paz; Arbussà i Reixach, Anna; Coenders, Germà

2016-01-01

This study contributes to the current literature on open innovation by analysing the effects of open innovation activities on the introduction of new-to-the-world innovations versus imitation. We base our analysis on data provided by the Eurostat Community Innovation Survey (CIS) carried out in Germany in 2012, which for the first time made a distinction between world-first innovation and imitation. We use both logit models and CHAID trees. The results of both analyses show that traditional i...

Moving NSDC's Staff Development Standards into Practice: Innovation Configurations. Volume I

Science.gov (United States)

National Staff Development Council, 2003

2003-01-01

NSDC's groundbreaking work in developing standards for staff development has now been joined by an equally important book that spells out exactly how those standards would look if they were being implemented by school districts. An Innovation Configuration map is a device that identifies and describes the major components of a new practice--in…

Open Innovation Practices and their Effect on Innovation Performance

DEFF Research Database (Denmark)

Ebersberger, Bernd; Bloch, Carter Walter; Herstad, Sverre

2013-01-01

This paper develops an indicator framework for examining open innovation practices and their impact on performance. The analysis, which is based on Community Innovation Survey (CIS) data for Austria, Belgium, Denmark and Norway, yields a number of interesting results. First, we find that open inn...... for innovative performance, stressing that open innovation is not a substitute for internal knowledge building.......This paper develops an indicator framework for examining open innovation practices and their impact on performance. The analysis, which is based on Community Innovation Survey (CIS) data for Austria, Belgium, Denmark and Norway, yields a number of interesting results. First, we find that open...... innovation practices have a strong impact on innovation performance. Second, results suggest that that broad-based approaches yield the strongest impacts, and that the collective of open innovation strategies appear more important than individual practices. Third, intramural investments are still important...

Value-based purchasing of medical devices.

Science.gov (United States)

Obremskey, William T; Dail, Teresa; Jahangir, A Alex

2012-04-01

Health care in the United States is known for its continued innovation and production of new devices and techniques. While the intention of these devices is to improve the delivery and outcome of patient care, they do not always achieve this goal. As new technologies enter the market, hospitals and physicians must determine which of these new devices to incorporate into practice, and it is important these devices bring value to patient care. We provide a model of a physician-engaged process to decrease cost and increase review of physician preference items. We describe the challenges, implementation, and outcomes of cost reduction and product stabilization of a value-based process for purchasing medical devices at a major academic medical center. We implemented a physician-driven committee that standardized and utilized evidence-based, clinically sound, and financially responsible methods for introducing or consolidating new supplies, devices, and technology for patient care. This committee worked with institutional finance and administrative leaders to accomplish its goals. Utilizing this physician-driven committee, we provided access to new products, standardized some products, decreased costs of physician preference items 11% to 26% across service lines, and achieved savings of greater than $8 million per year. The implementation of a facility-based technology assessment committee that critically evaluates new technology can decrease hospital costs on implants and standardize some product lines.

Biomedical engineering principles of modern cochlear implants and recent surgical innovations.

Science.gov (United States)

Eshraghi, Adrien A; Gupta, Chhavi; Ozdamar, Ozcan; Balkany, Thomas J; Truy, Eric; Nazarian, Ronen

2012-11-01

This review covers the most recent clinical and surgical advances made in the development and application of cochlear implants (CIs). In recent years, dramatic progress has been made in both clinical and basic science aspect of cochlear implantation. Today's modern CI uses multi-channel electrodes with highly miniaturized powerful digital processing chips. This review article describes the function of various components of the modern multi-channel CIs. A selection of the most recent clinical and surgical innovations is presented. This includes the preliminary results with electro-acoustic stimulation or hybrid devices and ongoing basic science research that is focused on the preservation of residual hearing post-implantation. The result of an original device that uses a binaural stimulation mode with a single implanted receiver/stimulator is also presented. The benefit and surgical design of a temporalis pocket technique for the implant's receiver stimulator is discussed. Advances in biomedical engineering and surgical innovations that lead to an increasingly favorable clinical outcome and to an expansion of the indication of CI surgery are presented and discussed. Copyright © 2012 Wiley Periodicals, Inc.

Innovations in design and technology. The story of hip arthroplasty.

Science.gov (United States)

Amstutz, H C

2000-09-01

The current study reviews the early history of surgeon-initiated trial and error development in hip joint arthroplasty and the subsequent methodological evolution to proper criteria for hypothesis testing using bioengineers and other research scientists. The interplay and relationships to industry, universities, scientific organizations, and the Food and Drug Administration with respect to device development in hip arthroplasty are reviewed. The ethics of and responsibilities to involved parties are outlined, citing the history of many contemporary developments. Examples are provided from the evolution and introduction of unsuccessful innovations, and the problems inherent in the current methodology of the approval process from the Food and Drug Administration using the 5-10K, Investigative Device Exemption, and the Pre-Market Approval protocols. The pros and cons of randomized trials for devices are outlined with the conclusion that they are not appropriate for device introduction. The proper, rational methodology for introduction of new devices is a phased-in clinical trial process after pertinent bench testing. Finally, the ethical dilemmas created by managed care are addressed. Industry involvements of the surgeon-spokesmen are cited.

Innovating beyond Technology : Studies on how management innovation, co-creation and business model innovation contribute to firms' (innovation) performance

NARCIS (Netherlands)

C.V. Heij (Kevin)

2015-01-01

textabstractInnovation is generally considered to be a cornerstone of organizational survival in many of today’s dynamic and competitive markets. This dissertation goes beyond the dominant focus on technological innovation in innovation studies by examining how and under which conditions several

Multimedia data mining and analytics disruptive innovation

CERN Document Server

Baughman, Aaron; Pan, Jia-Yu; Petrushin, Valery A

2015-01-01

This authoritative text/reference provides fresh insights into the cutting edge of multimedia data mining, reflecting how the research focus has shifted towards networked social communities, mobile devices and sensors. Presenting a detailed exploration into the progression of the field, the book describes how the history of multimedia data processing can be viewed as a sequence of disruptive innovations. Across the chapters, the discussion covers the practical frameworks, libraries, and open source software that enable the development of ground-breaking research into practical applications.

Influence of Buoyancy Control Performance on Power Production by the Wave Dragon Nissum Bredning Prototype

DEFF Research Database (Denmark)

Kofoed, Jens Peter; Tedd, James; Friis-Madsen, E.

2007-01-01

This paper reports on the real sea performance of the buoyancy control system of Wave Dragon, a floating wave energy converter using the overtopping principle. The device operates with the full independent control system which has been tested during three years of operation. The impact of the buo...... of the buoyancy control system performance on the power production is noted. This provides motivation and a target for improved control algorithms....

Policy Innovation in Innovation Policy

DEFF Research Database (Denmark)

Borras, Susana

During the past two decades Europe has experienced important changes and transformations in the way in which governments approach the issue of science, technology and innovation, and their relation to economic growth and competitiveness. This has to do with the European Union level as well...... as with national and sub-national governments in Europe, all of them introducing interesting novelties in their innovation policy. These changes refer to different aspects of policy, mainly the content of policy initiatives towards science, technology and innovation; the instruments governments are using...... at the EU level, and mentions similar trends taking place at national and sub-national levels. The questions that guide the contents here are essentially three, namely, what are the main traits of innovation policies in Europe since the 1990s and how have the EU and different national governments approached...

Virtual worlds are an innovative tool for medical device training in a simulated environment.

Science.gov (United States)

Patel, Vishal; Lee, Henry; Taylor, Dave; Aggarwal, Rajesh; Kinross, James; Darzi, Ara

2012-01-01

Medical infusion devices are an integral component within the delivery of healthcare management. The aim of this study was to develop a training simulation in the virtual world of Second Life for the management of adverse events associated with infusion devices. Forty nurses were subsequently recruited to participate within the simulation and assess its feasibility.

Flexible energy-storage devices: design consideration and recent progress.

Science.gov (United States)

Wang, Xianfu; Lu, Xihong; Liu, Bin; Chen, Di; Tong, Yexiang; Shen, Guozhen

2014-07-23

Flexible energy-storage devices are attracting increasing attention as they show unique promising advantages, such as flexibility, shape diversity, light weight, and so on; these properties enable applications in portable, flexible, and even wearable electronic devices, including soft electronic products, roll-up displays, and wearable devices. Consequently, considerable effort has been made in recent years to fulfill the requirements of future flexible energy-storage devices, and much progress has been witnessed. This review describes the most recent advances in flexible energy-storage devices, including flexible lithium-ion batteries and flexible supercapacitors. The latest successful examples in flexible lithium-ion batteries and their technological innovations and challenges are reviewed first. This is followed by a detailed overview of the recent progress in flexible supercapacitors based on carbon materials and a number of composites and flexible micro-supercapacitors. Some of the latest achievements regarding interesting integrated energy-storage systems are also reviewed. Further research direction is also proposed to surpass existing technological bottle-necks and realize idealized flexible energy-storage devices. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A case study in open source innovation: developing the Tidepool Platform for interoperability in type 1 diabetes management.

Science.gov (United States)

Neinstein, Aaron; Wong, Jenise; Look, Howard; Arbiter, Brandon; Quirk, Kent; McCanne, Steve; Sun, Yao; Blum, Michael; Adi, Saleh

2016-03-01

Develop a device-agnostic cloud platform to host diabetes device data and catalyze an ecosystem of software innovation for type 1 diabetes (T1D) management. An interdisciplinary team decided to establish a nonprofit company, Tidepool, and build open-source software. Through a user-centered design process, the authors created a software platform, the Tidepool Platform, to upload and host T1D device data in an integrated, device-agnostic fashion, as well as an application ("app"), Blip, to visualize the data. Tidepool's software utilizes the principles of modular components, modern web design including REST APIs and JavaScript, cloud computing, agile development methodology, and robust privacy and security. By consolidating the currently scattered and siloed T1D device data ecosystem into one open platform, Tidepool can improve access to the data and enable new possibilities and efficiencies in T1D clinical care and research. The Tidepool Platform decouples diabetes apps from diabetes devices, allowing software developers to build innovative apps without requiring them to design a unique back-end (e.g., database and security) or unique ways of ingesting device data. It allows people with T1D to choose to use any preferred app regardless of which device(s) they use. The authors believe that the Tidepool Platform can solve two current problems in the T1D device landscape: 1) limited access to T1D device data and 2) poor interoperability of data from different devices. If proven effective, Tidepool's open source, cloud model for health data interoperability is applicable to other healthcare use cases. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association.

Fabrication of fluidic devices with 30 nm nanochannels by direct imprinting

DEFF Research Database (Denmark)

Cuesta, Irene Fernandez; Palmarelli, Anna Laura; Liang, Xiaogan

2011-01-01

In this work, we propose an innovative approach to the fabrication of a complete micro/nano fluidic system, based on direct nanoimprint lithography. The fabricated device consists of nanochannels connected to U-shaped microchannels by triangular tapered inlets, and has four large reservoirs for l...

Initiatives in the Australian Medical Devices Industry

International Nuclear Information System (INIS)

Whelan, Luke

2005-01-01

The medical device industry is as diverse as it is specialised and calls on the innovative use of design and components and utilises all facets of precision manufacturing from printed circuit boards, injection-moulded plastics to engineering, using a wide range of materials. It generally requires exacting standards, starting with design, particularly for devices that are invasive or have direct contact with the human body. Of course this brings the further consideration of sterilisation and whether it is for single or multiple use. There is an ever-present need to produce more accurate less invasive and cheaper devices. The driving motivation appears to be meeting clinical needs at a reduced cost. The push to treat people outside the hospital is growing, creating new demands and directions. The advent of the Internet and wireless technology has opened a whole new direction of research and development opportunities

Electromagnetic Design of High Frequency PFC Boost Converters using Gallium Nitride Devices

NARCIS (Netherlands)

Wang, W.

2017-01-01

Throughout the history of power electronics, main driving force of developments is attribute to innovations in power semiconductor technology. With continuous technical improvements in the past 30 years, Si devices, being the most widely used power semiconductor technology, are approaching physical

Innovation through accelerators: A case for open innovation

Directory of Open Access Journals (Sweden)

Lerato E. Mohalajeng

2016-12-01

Full Text Available Background: Open innovation is becoming a progressive business practice in Southern Africa because it plays a significant role in economic development through promoting the commercialisation of new ideas. The challenge is that while the benefits of open innovation are widely spoken about, not much is understood about the challenges and successes of open innovation accelerators (OIAs in taking ideas to market. Aim: The purpose of this research was to investigate an OIA in South Africa for taking ideas to market. Setting: The Innovation Hub is a science park in Pretoria, South Africa, using open innovation to stimulate entrepreneurship in South Africa. Through The Innovation Hub Open IX, a webbased platform, an opportunity to investigate the bridging from invention to commercialisation is presented. Methods: A qualitative research method using semi-structured, in-depth interviews was applied to collect data. Five key stakeholders of the OIA were interviewed. Results: The findings suggest that stakeholder buy-in is essential for commercialisation through OIAs in South Africa. By involving stakeholders in the initial phases of the open innovation process, the likelihood of a solution being incorporated and fitted into the organisation’s business strategy is increased. Conclusion: The insight gained from this research suggests policymakers, research institutions and commercial businesses ought to explore various innovations across industries relevant to their open innovation proficiencies. This research makes a significant contribution to an indepth understanding of what is needed to bridge the gap from invention to successful commercialisation through open innovation.

Innovation Policy Development and the Emergence of New Innovation Paradigms

DEFF Research Database (Denmark)

Tanev, Stoyan; Knudsen, Mette Præst; Bisgaard, Tanja

2011-01-01

The objective of the present article is to discuss innovation policy issues related to three emerging innovation paradigms: user-driven innovation, open innovation, and value cocreation. It provides a summary of insights based on innovation policy practices and challenges in Denmark. The choice...... of Danish innovation policy practices is not accidental. In 2008 Denmark implemented 40 different national innovation programs by allocating about 400 million euros. Since the three emerging paradigms have become globally relevant, the discussion of Danish policy development challenges and practices...... is expected to be insightful for innovation experts from other developed countries that are currently dealing with the adoption of these paradigms....

Innovation Types and Talent Management for Innovation

Directory of Open Access Journals (Sweden)

Juan A. Marin-Garcia

2011-12-01

Full Text Available Companies need to become innovative and in order to do so, they must learn how to be able to manage the talent of their workforce In this working paper we have reviewed the literature concerning the concept of innovation as a key for the challenge for change in companies to establish a synthesis and a classification of the types of innovation required. We propose a number of competencies needed by the different staff members (support, technicians, managers, etc as well, so that they can succeed in being innovative in different ways.

Mindful innovation

DEFF Research Database (Denmark)

Olsen, Poul Bitsch

2008-01-01

Mindful innovation is an approach to innovation that pays attention to people's experience in an organization rather than to formal organization or social role.......Mindful innovation is an approach to innovation that pays attention to people's experience in an organization rather than to formal organization or social role....

Architectural innovation foresight of thermoelectric generator charger integrated portable power supply for portable consumer electronic device in metropolitan market: The case study of Thailand

Science.gov (United States)

Maolikul, S.; Kiatgamolchai, S.; Chavarnakul, T.

2012-06-01

In the context of information and communication technology (ICT) trend for worldwide individuals, social life becomes digital and portable consumer electronic devices (PCED) powered by conventional power supply from batteries have been evolving through miniaturization and various function integration. Thermoelectric generators (TEG) were hypothesized for its potential role of battery charger to serve the shining PCED market. Hence, this paper, mainly focusing at the metropolitan market in Thailand, aimed to conduct architectural innovation foresight and to develop scenarios on potential exploitation approach of PCED battery power supply with TEG charger converting power from ambient heat source adjacent to individual's daily life. After technical review and assessment for TEG potential and battery aspect, the business research was conducted to analyze PCED consumer behavior for their PCED utilization pattern, power supply lack problems, and encountering heat sources/sinks in 3 modes: daily life, work, and leisure hobbies. Based on the secondary data analysis from literature and National Statistical Office of Thailand, quantitative analysis was applied using the cluster probability sampling methodology, statistically, with the sample size of 400 at 0.05 level of significance. In addition, the qualitative analysis was conducted to emphasize the rationale of consumer's behavior using in-depth qualitative interview. Scenario planning technique was also used to generate technological and market trend foresight. Innovation field and potential scenario for matching technology with market was proposed in this paper. The ingredient for successful commercialization of battery power supply with TEG charger for PCED market consists of 5 factors as follows: (1) PCED characteristic, (2) potential ambient heat sources/sinks, (3) battery module, (4) power management module, and the final jigsaw (5) characteristic and adequate arrangement of TEG modules. The foresight outcome for

Applying open source innovation approaches in developing business innovation

DEFF Research Database (Denmark)

Aagaard, Annabeth; Lindgren, Peter

2015-01-01

and managed effectively in developing business model innovation. The aim of this paper is therefore to close this research gap and to provide new knowledge within the research field of OI and OI applications. Thus, in the present study we explore the facilitation and management of open source innovation...... in developing business model innovation in the context of an international OI contest across five international case companies. The findings reveal six categories of key antecedents in effective facilitation and management of OI in developing business model innovation.......More and more companies are pursuing continuous innovation through different types of open source innovation and across different partners. The growing interest in open innovation (OI) originates both from the academic community as well as amongst practitioners motivating further investigation...

Orchestrating innovation

OpenAIRE

Berkers, F.T.H.M.; Klein Woolthuis, R.J.A.; Boer, J. de

2015-01-01

Orchestrating Innovation increases the probability of success, minimizing the probability of failure of technological innovations by creating sustained societal and economic value. Orchestrating innovation propagates to take into account and actively involve all relevant stakeholders of the (future) ecosystem in which the innovation will, can or has to be adopted.

The potential of medical device industry in technological and economical context.

Science.gov (United States)

Maresova, Petra; Penhaker, Marek; Selamat, Ali; Kuca, Kamil

2015-01-01

The high quality of public health improves not only healthy life expectancy, but also the productivity of labor. The most important part of the health care sector is the medical technology industry. The aim of this study is to analyze the current situation in the medical device industry in Europe, its potential strengths and weaknesses in the context of topical economic and demographic development. The contribution specifies an analysis of the economic state of the medical device industry in the context of demographic development of European Union's macroeconomic indicators and views of experts in the field of medical device development, concerning the opportunities for entities involved in the medical device market. There is fierce competition on the European market. The innovative activity is stable and well regulated by responsible authorities. Worldwide, the medical device market is expected to grow.

Electrochemical model of the polyaniline based organic memristive device

International Nuclear Information System (INIS)

Demin, V. A.; Erokhin, V. V.; Kashkarov, P. K.; Kovalchuk, M. V.

2014-01-01

The electrochemical organic memristive device with polyaniline active layer is a stand-alone device designed and realized for reproduction of some synapse properties in the innovative electronic circuits, including the neuromorphic networks capable for learning. In this work, a new theoretical model of the polyaniline memristive is presented. The developed model of organic memristive functioning was based on the detailed consideration of possible electrochemical processes occuring in the active zone of this device. Results of the calculation have demonstrated not only the qualitative explanation of the characteristics observed in the experiment but also the quantitative similarities of the resultant current values. It is shown how the memristive could behave at zero potential difference relative to the reference electrode. This improved model can establish a basis for the design and prediction of properties of more complicated circuits and systems (including stochastic ones) based on the organic memristive devices

Teacher Implementation of "Bring Your Own Device" at a Suburban High School Serving High SES Students

Science.gov (United States)

Ross, Kyle

2013-01-01

As students gain access to personally-owned Mobile Communication Devices (MCDs), schools have begun to embrace MCDs as mobile-learning (m-learning) teaching and learning tools. A research gap currently exists for the innovation of m-learning with student-owned devices, which this study attempts to fill by answering the following Research Question:…

Managing innovation complexity: About the co-existence of innovation types

OpenAIRE

Pohlmann, Philipp Adrian

2014-01-01

The purpose of this study is to contribute to the changing innovation management literature by providing an overview of different innovation types and organizational complexity factors. Aiming at a better understanding of effective innovation management, innovation and complexity are related to the formulation of an innovation strategy and interaction between different innovation types is further explored. The chosen approach in this study is to review the existing literature on different inn...

Early decision-analytic modeling - a case study on vascular closure devices.

Science.gov (United States)

Brandes, Alina; Sinner, Moritz F; Kääb, Stefan; Rogowski, Wolf H

2015-10-27

As economic considerations become more important in healthcare reimbursement, decisions about the further development of medical innovations need to take into account not only medical need and potential clinical effectiveness, but also cost-effectiveness. Already early in the innovation process economic evaluations can support decisions on development in specific indications or patient groups by anticipating future reimbursement and implementation decisions. One potential concept for early assessment is value-based pricing. The objective is to assess the feasibility of value-based pricing and product design for a hypothetical vascular closure device in the pre-clinical stage which aims at decreasing bleeding events. A deterministic decision-analytic model was developed to estimate the cost-effectiveness of established vascular closure devices from the perspective of the Statutory Health Insurance system. To identify early benchmarks for pricing and product design, three strategies of determining the product's value are explored: 1) savings from complications avoided by the new device; 2) valuation of the avoided complications based on an assumed willingness-to-pay-threshold (the efficiency frontier approach); 3) value associated with modifying the care pathways within which the device would be applied. Use of established vascular closure devices is dominated by manual compression. The hypothetical vascular closure device reduces overall complication rates at higher costs than manual compression. Maximum cost savings of only about €4 per catheterization could be realized by applying the hypothetical device. Extrapolation of an efficiency frontier is only possible for one subgroup where vascular closure devices are not a dominated strategy. Modifying care in terms of same-day discharge of patients treated with vascular closure devices could result in cost savings of €400-600 per catheterization. It was partially feasible to calculate value-based prices for the

Challenges facing academic research in commercializing event-detector implantable devices for an in-vivo biomedical subcutaneous device for biomedical analysis

Science.gov (United States)

Juanola-Feliu, E.; Colomer-Farrarons, J.; Miribel-Català, P.; Samitier, J.; Valls-Pasola, J.

2011-05-01

It is widely recognized that the welfare of the most advanced economies is at risk, and that the only way to tackle this situation is by controlling the knowledge economies and dealing with. To achieve this ambitious goal, we need to improve the performance of each dimension in the "knowledge triangle": education, research and innovation. Indeed, recent findings point to the importance of strategies of adding-value and marketing during R+D processes so as to bridge the gap between the laboratory and the market and so ensure the successful commercialization of new technology-based products. Moreover, in a global economy in which conventional manufacturing is dominated by developing economies, the future of industry in the most advanced economies must rely on its ability to innovate in those high-tech activities that can offer a differential added-value, rather than on improving existing technologies and products. It seems quite clear, therefore, that the combination of health (medicine) and nanotechnology in a new biomedical device is very capable of meeting these requisites. This work propose a generic CMOS Front-End Self-Powered In-Vivo Implantable Biomedical Device, based on a threeelectrode amperometric biosensor approach, capable of detecting threshold values for targeted concentrations of pathogens, ions, oxygen concentration, etc. Given the speed with which diabetes can spread, as diabetes is the fastest growing disease in the world, the nano-enabled implantable device for in-vivo biomedical analysis needs to be introduced into the global diabetes care devices market. In the case of glucose monitoring, the detection of a threshold decrease in the glucose level it is mandatory to avoid critic situations like the hypoglycemia. Although the case study reported in this paper is complex because it involves multiple organizations and sources of data, it contributes to extend experience to the best practices and models on nanotechnology applications and

Framing Innovation

DEFF Research Database (Denmark)

Haase, Louise Møller; Laursen, Linda Nhu

2017-01-01

Designing a remarkable product innovation is a difficult challenge, which businesses today continuously are striving to tackle. This challenge is particularly present in the early phase of innovation, where the main product concept and frames of the innovation is determined. As a main challenge...... in the early phase is the reasoning process; innovation team are faced with open- ended ill-defines problems, where they need to make decisions about an unknown future having only incomplete, ambiguous and contradicting insights available. We study the reasoning of experts, how they frame to make sense of all...... the insights and create a basis for decision making in relation to a new project. Based on case studies of five innovative products from various industries, we suggest a Product Reasoning Model for understanding reasoning and envisioning of new product innovations in the early phases of innovation....

Building a wave energy policy focusing on innovation, manufacturing and deployment

International Nuclear Information System (INIS)

Dalton, G.; Gallachoir, B.P.O.

2010-01-01

The Irish Government has set a goal to make Ireland a world leader for research, development and deployment of ocean energy technologies. Ireland has a wave energy resource of 21 TWh and an ambition is to achieve at least 500 MW installed generating capacity from ocean energy by 2020. This paper investigates what is required to move from ambition to delivery. A successful wave energy strategy will require focused policies that will stimulate innovation to develop the technologies, manufacturing to produce the devices and deployment to build the required wave power plants. The paper draws on the successful policies in Ireland that have stimulated each of these dimensions, albeit for different sectors. From 2004 to 2008, successful policies in (ICT and biotech) innovation led to an increase in Ireland's Innovation Index score from 0.48 to 0.53. The policy focus on (food and pharmaceuticals) manufacturing in Ireland resulted in high levels of economic growth over the period 1998-2002, reaching >10% GDP growth levels per annum, and full employment. Successful wind energy policies deployment has accelerated rapidly since 2003 and reached 1.2 GW installed capacity in 2009 representing 15% of Ireland's total installed capacity. The paper draws on appropriate elements of these policies to build a successful wave energy policy for Ireland. It also draws on the successful policies adopted in Denmark for innovation, manufacturing and deployment of wind energy. The Danish wind turbine manufacturers hold a world market share of approximately 40%. The paper proposes establishing a wave energy strategy group to develop an action plan to deliver the 500 MW. It also proposes a novel extension of corporate tax specifically for wave energy companies, an initial 30% capital grant scheme for wave energy developers, a grid code for wave energy devices and fast tracking of planning decisions through an amended approach to strategic infrastructure. (author)

Stepwise innovation adoption : a neglected concept in innovation research

NARCIS (Netherlands)

Huizingh, K.R.E.; Brand, M.J.

2009-01-01

Most innovation researchers tend to consider innovation adoption as a binary process, implying that companies have either adopted an innovation or not. In this paper we focus on e-commerce as an innovation that can be adopted stepwise. We distinguish between two levels of e-commerce, basic and

Technological Innovation, R & D Activities and Innovation System Between Organizations

Directory of Open Access Journals (Sweden)

Jonas Pedro Fabris

2015-08-01

Full Text Available This theoretical paper aimed to explicit, through the rescue of theoretical assumptions, the innovation, the innovation system, and the research and development (R & D activities. The innovation, especially technological innovation, is now seen as essential in differentiation strategies, competitiveness and growth in a greater number of businesses. Innovation is not only the result of financial investments by companies. For it to exist, it is necessary the existence of innovative capacity that should be present at all stages of the innovation process, and a favorable institutional environment and, increasingly, of specific incentive policies. That is, there are internal and external factors to companies and other institutions involved in the process. Innovation systems were discovered to resolve the variations in the degree of competitiveness of different economies and, above all, in relation to the technological performance and the ability to innovate these economies face the growing importance of international markets for high-tech products. Thus, it was found that successful innovators are not successful just because of their personal qualities and actions but as a result of their interaction with research and innovation systems that inhabit the quality of such systems.

Social Innovation Europe: Country Summary: Poland. Social Innovation in Poland

OpenAIRE

Klimczuk, Andrzej

2015-01-01

The history of social innovation in country, challenges being addressed by social innovation. the key actors, who is promoting social innovation. A few of the key projects that illustrate social innovation.

Innovation and Safety. A prestudy; Innovation och saekerhet. En foerstudie

Energy Technology Data Exchange (ETDEWEB)

Rollenhagen, Carl; Hansson, Sven Ove; Hortberg, Johan; Jakobsson, Fredrik; Zhau, Victoria Jing; Mojeri, Sara

2010-04-15

The project summarized in this report was initiated to explore relations between innovation and safety. The first two sections of the report discuss some previously conducted research and give a general background to the subject. It is concluded that safety research and innovation research, by and large, has developed as separate academic disciplines. The concepts of 'innovative safety culture' and 'safe innovation cultures' are suggested as two concepts that can be used to integrate research: innovative safety cultures depart from safety culture research but attempts to introduce an innovative dimension with the aim to create adaptive and innovative safety cultures that efficiently can handle risks arising from existing innovations. Safe innovation cultures have focus on innovation itself, but with the ambition to introduce concepts and methods from safety research in the innovative processes. Three subprojects conducted in the context of the present research are summarized. The first project examines how an existing organization (e.g. SKB - Swedish Nuclear Fuel and Waste Management) attempts to integrate both innovative activities and operative activities in the same organisation. Interviews with key personnel explored different views about how innovative and safety work coexists in the organisation. The second project focuses on how major retrofit projects of a nuclear power plant is managed in parallel to operative activities (e.g. operating the plant on an everyday basis). By means of an innovative technique (e.g. system groups) seminars were held to suggest improvements in the technical change process. The third project conducted a risk analysis of a major organisational change (e.g. control centres for energy distribution). Experiences from the three projects are finally discussed in terms of similarities and differences associated with the cultures for innovation and safety. Suggestions for further research are made

How to Develop Innovators? Innovation Education for the Gifted

Science.gov (United States)

Shavinina, Larisa

2013-01-01

Many people correctly believe that a majority of innovators come from the population of gifted and talented children. If we want to develop innovative abilities of the gifted, then a special, new direction in gifted education is needed: innovation education. This article introduces innovation education, which refers to a wide range of educational…

Interplay of multiple synaptic plasticity features in filamentary memristive devices for neuromorphic computing

Science.gov (United States)

La Barbera, Selina; Vincent, Adrien F.; Vuillaume, Dominique; Querlioz, Damien; Alibart, Fabien

2016-12-01

Bio-inspired computing represents today a major challenge at different levels ranging from material science for the design of innovative devices and circuits to computer science for the understanding of the key features required for processing of natural data. In this paper, we propose a detail analysis of resistive switching dynamics in electrochemical metallization cells for synaptic plasticity implementation. We show how filament stability associated to joule effect during switching can be used to emulate key synaptic features such as short term to long term plasticity transition and spike timing dependent plasticity. Furthermore, an interplay between these different synaptic features is demonstrated for object motion detection in a spike-based neuromorphic circuit. System level simulation presents robust learning and promising synaptic operation paving the way to complex bio-inspired computing systems composed of innovative memory devices.

Energy harvesting: an integrated view of materials, devices and applications

Science.gov (United States)

Radousky, H. B.; Liang, H.

2012-12-01

Energy harvesting refers to the set of processes by which useful energy is captured from waste, environmental, or mechanical sources and is converted into a usable form. The discipline of energy harvesting is a broad topic that includes established methods and materials such as photovoltaics and thermoelectrics, as well as more recent technologies that convert mechanical energy, magnetic energy and waste heat to electricity. This article will review various state-of-the-art materials and devices for direct energy conversion and in particular will include multistep energy conversion approaches. The article will highlight the nano-materials science underlying energy harvesting principles and devices, but also include more traditional bulk processes and devices as appropriate and synergistic. Emphasis is placed on device-design innovations that lead to higher efficiency energy harvesting or conversion technologies ranging from the cm/mm-scale down to MEMS/NEMS (micro- and nano-electromechanical systems) devices. Theoretical studies are reviewed, which address transport properties, crystal chemistry, thermodynamic analysis, energy transfer, system efficiency and device operation. New developments in experimental methods; device design and fabrication; nanostructured materials fabrication; materials properties; and device performance measurement techniques are discussed.

Review on microfluidic paper-based analytical devices towards commercialisation.

Science.gov (United States)

Akyazi, Tugce; Basabe-Desmonts, Lourdes; Benito-Lopez, Fernando

2018-02-25

Paper-based analytical devices introduce an innovative platform technology for fluid handling and analysis, with wide range of applications, promoting low cost, ease of fabrication/operation and equipment independence. This review gives a general overview on the fabrication techniques reported to date, revealing and discussing their weak points as well as the newest approaches in order to overtake current mass production limitations and therefore commercialisation. Moreover, this review aims especially to highlight novel technologies appearing in literature for the effective handling and controlling of fluids. The lack of flow control is the main problem of paper-based analytical devices, which generates obstacles for marketing and slows down the transition of paper devices from the laboratory into the consumers' hands. Copyright © 2017 Elsevier B.V. All rights reserved.

Innovative didaktik

DEFF Research Database (Denmark)

Lund, Birthe

Innovative didaktik. This deals with innovative didaktik from at methodological point of view in three ways - how to define the concept, how to develop it and how analyse it. Issues analysed: How to create innovative students? How to create innovative learning envoriments? These are core question...... in "Projekt Innovativ didaktik". The hidden curriculum is to inspire students to develop entreprenuership and creativty....

Participatory Innovation

DEFF Research Database (Denmark)

Buur, Jacob; Matthews, Ben

2008-01-01

An increasing number of corporations engage with users in co-innovation of products and services. But there are a number of competing perspectives on how best to integrate these understandings into existing corporate innovation development processes. This paper maps out three of the dominant appr...... the challenges such an approach sets to innovation management, and discuss research directions we see as fundamental to the development of the field of user-driven innovation. Udgivelsesdato: September......An increasing number of corporations engage with users in co-innovation of products and services. But there are a number of competing perspectives on how best to integrate these understandings into existing corporate innovation development processes. This paper maps out three of the dominant...... approaches, compares them in terms of goals, methods and basic philosophy, and shows how they may beneficially enrich one another. We will present an industrial innovation case that has been instrumental to the development of what we have termed ‘Participatory Innovation’. Based on this we will list...

Internal Determinants of Product Innovation and Management Innovation

DEFF Research Database (Denmark)

Harder, Mie

This paper adopts a behavioral theory of the firm perspective in order to compare the antecedents of two types of innovation: Management innovation refers to the adoption of new management practices or organizational structures, whereas product innovation refers to the introduction of new product...

Innovation process and innovativeness of facility management organizations

NARCIS (Netherlands)

Mudrak, T.; Wagenberg, van A.F.; Wubben, E.F.M.

2005-01-01

Purpose - The innovation patterns and processes in facility management (FM) organizations are crucial for the development of FM as a discipline, but they are not yet fully explored and understood. This paper aims to clarify FM innovation from the perspective of innovation processes and the

Stability, divertors and innovative concepts

International Nuclear Information System (INIS)

Mirnov, S.

2003-01-01

This paper contains a short resume of the sections on 'Stability, Divertors and Innovative Concepts' presented at the 19th IAEA Fusion Energy Conference. The main conclusions are: (1) the problem of type I ELMs in tokamaks seems to be not so dramatic; (2) it was demonstrated that the working pulse length of large thermonuclear devices can achieve 100 s and more; (3) the problem of tritium retention seems to be not so dramatic now; probable approaches of its solution are visible; (4) active methods of plasma instabilities suppression (NTM, RWM, sawteeth, external MHD) work successfully; (5) new methods of mitigation of the disruption consequences were offered. New technological ideas and new ideas on magnetic confinement were presented. (author)

Informal Innovation

DEFF Research Database (Denmark)

Hartmann, Mia Rosa Koss; Hartmann, Rasmus Koss

Informal innovation, defined as the development and putting-into-use of novel solutions by non-R&D employees without prior formal approval from or subsequent revealing to superiors, has been recurrently observed in organizational research. But even as it is increasingly recognized that R&D is not......Informal innovation, defined as the development and putting-into-use of novel solutions by non-R&D employees without prior formal approval from or subsequent revealing to superiors, has been recurrently observed in organizational research. But even as it is increasingly recognized that R......&D is not the only plausible source of innovation inside organizations, informal innovation has yet to be systematically explored or theorized. We propose a theory of informal innovation based on analyses of prior literature and mixed-method, multi-site studies of innovation at the working level of two extreme......-case organizations. We propose that informal innovation occurs as 1) employees personally experience problems that they believe are not recognized or prioritized by superiors; 2) some employees are able to develop solutions, essentially at no cost; 3) innovators face no benefits from revealing to superiors, but can...

Speeding Up Innovation

DEFF Research Database (Denmark)

Sørensen, Flemming; Mattsson, Jan

2016-01-01

Minimisation of time-to-market strategies can provide companies with a competitive advantage in dynamic and competitive environments. Using parallel innovation processes has been emphasised as one strategy to speed up innovation processes and consequently minimise the time-to-market of innovations....... Much innovation today takes place in open structures in which networks play an important role. However, little is known about how innovation networks can facilitate parallel innovation processes. This paper discusses how innovation network structures develop and support exploration and exploitation...... of the network facilitate the parallel innovation process but also how such processes place new requirements on such networks and their management....

EDITORIAL: Reigniting innovation in the transistor Reigniting innovation in the transistor

Science.gov (United States)

Demming, Anna

2012-09-01

behaviour in devices fabricated from chemically reduced graphene oxide. The work provided an important step forward for graphene electronics, which has been hampered by difficulties in scaling up the mechanical exfoliation techniques required to produce the high-quality graphene often needed for functioning devices [8]. In Sweden, researchers have developed a transistor design that they fabricate using standard III-V parallel processing, which also has great promise for scaling up production. Their transistor is based on a vertical array of InAs nanowires, which provide high electron mobility and the possibility of high-speed and low-power operation [9]. Different fabrication techniques and design parameters can influence the properties of transistors. Researchers in Belgium used a new method based on high-vacuum scanning spreading resistance microscopy to study the effect of diameter on carrier profile in nanowire transistors [10]. They then used experimental data and simulations to gain a better understanding of how this influenced the transistor performance. In Japan, Y Ohno and colleagues at Nagoya University have reported how atomic layer deposition of an insulating layer of HfO2 on carbon nanotube field effect transistors can change the carrier from p-type to n-type [11]. Carrier type switching—'ambipolar behaviour'—and hysteresis of carbon nanotube network transistors can make achieving reliable device performance challenging. However studies have also suggested that the hysteretic properties may be exploited in non-volatile memory applications. A collaboration of researchers in Italy and the US demonstrated transistor and memory cell behaviour in a system based on a carbon nanotube network [13]. Their device had relatively fast programming, good endurance and the charge retention was successfully enhanced by limiting exposure to air. Progress in understanding transistor behaviour has inspired other innovations in device applications. Nanowires are notoriously

Innovative Work Behavior

DEFF Research Database (Denmark)

Pihl-Thingvad, Signe; Klausen, Kurt Klaudi

work behaviour of the employees in a particular empirical setting. Innovative work behaviour has become an important concept in the literature on innovation. Theories on managing change and innovation in public service organizations would suggest that managers have several possibilities when ensuring...... the implementation of innovation. There is, however, still a gap (both empirical and theoretical) in the literature on how managers can contribute to and strengthen the employees’ innovative work behaviour in public service organizations. Therefore, we focus on the following research questions. Which management...... strategies are public managers using in order to create more innovative work behaviour? How do public managers create an innovative climate in the organization which affects the innovative work behaviour positively? In this paper we examine the implementation of innovation in a large Danish municipality...

Innovation, what innovation? A comparison between product, process and organizational innovaton

NARCIS (Netherlands)

Boer, Harm; Boer, H.; During, W.E.

2001-01-01

This article compares and contrasts three types of innovations, namely, product innovation, process innovation and organisational innovation. From similarities and differences between these three types, implications for the theory and practice of innovation management are inferred. Most of these

Innovations in vascular and endovascular surgery in Brazil: a data analysis study

Directory of Open Access Journals (Sweden)

Heriberto Brito de Oliveira

2014-12-01

Full Text Available Background:Innovations in vascular and endovascular surgery have important social and economic repercussions. Most endovascular devices used in Brazil are imported and, therefore, particularly expensive.Objective:To conduct a retrospective analysis of patent and regulatory approval data for newly developed vascular and endovascular devices, based on the number of patents registered at the Brazilian National Industrial Property Institute (INPI and the number of products approved by the National Health Surveillance Agency (ANVISA over recent years.Methods:This retrospective study involved electronic searches of the INPI (www.inpi.gov.br and ANVISA websites (www.anvisa.gov.br, for patents registered and products approved between January 1997 and December 2012.Results:The keywords used for the search ("catheter(s," "stent(s," "graft(s," and "wound dressing(s" returned a total of 701 new patents registered during the period studied. Thirty-four percent (n=237 of these were patents for wound dressings, while the remaining 66% (n=464 were for devices used in endovascular surgery. Only 7.8% (n=268 of the 3433 products approved by ANVISA during the period analyzed were produced in Brazil.Conclusions:The social and economic importance of innovations in health care highlights the need to monitor them, to register them and to support their production, in view of the need to develop local alternatives to imported health care technology.

GeckoFTL: Scalable Flash Translation Techniques For Very Large Flash Devices

DEFF Research Database (Denmark)

Dayan, Niv; Bonnet, Philippe; Idreos, Stratos

2016-01-01

The volume of metadata needed by a flash translation layer (FTL) is proportional to the storage capacity of a flash device. Ideally, this metadata should reside in the device's integrated RAM to enable fast access. However, as flash devices scale to terabytes, the necessary volume of metadata...... thereby harming performance and device lifetime. In this paper, we identify a key component of the metadata called the Page Validity Bitmap (PVB) as the bottleneck. PVB is used by the garbage-collectors of state-of-the-art FTLs to keep track of which physical pages in the device are invalid. PVB...... constitutes 95% of the FTL's RAM-resident metadata, and recovering PVB after power fails takes a significant proportion of the overall recovery time. To solve this problem, we propose a page-associative FTL called GeckoFTL, whose central innovation is replacing PVB with a new data structure called Logarithmic...

Cybersecurity Regulation of Wireless Devices for Performance and Assurance in the Age of "Medjacking".

Science.gov (United States)

Armstrong, David G; Kleidermacher, David N; Klonoff, David C; Slepian, Marvin J

2015-08-27

We are rapidly reaching a point where, as connected devices for monitoring and treating diabetes and other diseases become more pervasive and powerful, the likelihood of malicious medical device hacking (known as "medjacking") is growing. While government could increase regulation, we have all been witness in recent times to the limitations and issues surrounding exclusive reliance on government. Herein we outline a preliminary framework for establishing security for wireless health devices based on international common criteria. Creation of an independent medical device cybersecurity body is suggested. The goal is to allow for continued growth and innovation while simultaneously fostering security, public trust, and confidence. © 2015 Diabetes Technology Society.

Compressive Sampling of EEG Signals with Finite Rate of Innovation

Directory of Open Access Journals (Sweden)

Poh Kok-Kiong

2010-01-01

Full Text Available Analyses of electroencephalographic signals and subsequent diagnoses can only be done effectively on long term recordings that preserve the signals' morphologies. Currently, electroencephalographic signals are obtained at Nyquist rate or higher, thus introducing redundancies. Existing compression methods remove these redundancies, thereby achieving compression. We propose an alternative compression scheme based on a sampling theory developed for signals with a finite rate of innovation (FRI which compresses electroencephalographic signals during acquisition. We model the signals as FRI signals and then sample them at their rate of innovation. The signals are thus effectively represented by a small set of Fourier coefficients corresponding to the signals' rate of innovation. Using the FRI theory, original signals can be reconstructed using this set of coefficients. Seventy-two hours of electroencephalographic recording are tested and results based on metrices used in compression literature and morphological similarities of electroencephalographic signals are presented. The proposed method achieves results comparable to that of wavelet compression methods, achieving low reconstruction errors while preserving the morphologiies of the signals. More importantly, it introduces a new framework to acquire electroencephalographic signals at their rate of innovation, thus entailing a less costly low-rate sampling device that does not waste precious computational resources.

Online Innovation

DEFF Research Database (Denmark)

Vujovic, Sladjana; Ulhøi, John Parm

2008-01-01

  Purpose - The aim of this paper is to investigate the role of online networking during the innovation process, including its role(s) in communication, cooperation and coordination. The paper neither implicitly assumes that online computer-based networking is a prerequisite for the innovation...... process nor denies the possibility that innovation can emerge and successfully survive without it. It merely presupposes that, in cases of innovation where information and communication technologies play a substantial role, non-proprietarity may offer an interesting alternative to innovations based...... on proprietary knowledge. Design/methodology/approach - The paper borrows from the theory of communities-of-practice, which takes into account social relations, contacts, and the transfer and incorporation of knowledge. Open source innovation is not the exclusive preserve of computer nerds, but also has...

Extended device profiles and testing procedures for the approval process of integrated medical devices using the IEEE 11073 communication standard.

Science.gov (United States)

Janß, Armin; Thorn, Johannes; Schmitz, Malte; Mildner, Alexander; Dell'Anna-Pudlik, Jasmin; Leucker, Martin; Radermacher, Klaus

2018-02-23

Nowadays, only closed and proprietary integrated operating room systems (IORS) from big manufacturers are available on the market. Hence, the interconnection of components from third-party vendors is only possible with increased time and costs. In the context of the German Federal Ministry of Education and Research (BMBF)-funded project OR.NET (2012-2016), the open integration of medical devices from different manufacturers was addressed. An integrated operating theater based on the open communication standard IEEE 11073 shall give clinical operators the opportunity to choose medical devices independently of the manufacturer. This approach would be advantageous especially for hospital operators and small- and medium-sized enterprises (SME) of medical devices. Actual standards and concepts regarding technical feasibility and the approval process do not cope with the requirements for a modular integration of medical devices in the operating room (OR), based on an open communication standard. Therefore, innovative approval strategies and corresponding certification and test procedures, which cover actual legal and normative standards, have to be developed in order to support the future risk management and the usability engineering process of open integrated medical devices in the OR. The use of standardized device and service profiles and a three-step testing procedure, including conformity, interoperability and integration tests are described in this paper and shall support the manufacturers to integrate their medical devices without disclosing the medical devices' risk analysis and related confidential expertise or proprietary information.

IAEA technical committee meeting on research using small fusion devices (abstracts)

International Nuclear Information System (INIS)

1999-12-01

The thirteenth IAEA technical committee meeting on research using small fusion devices are held in Chengdu, P. R. China on 18-20 Oct. , 1999. 41 articles are received and the content includes toroidal systems, helical systems, plasma focus, diagnostic systems, theory and modeling, improving confinement, numerical simulation, innovative concepts and others

Advanced mechatronics and MEMS devices II

CERN Document Server

Wei, Bin

2017-01-01

This book introduces the state-of-the-art technologies in mechatronics, robotics, and MEMS devices in order to improve their methodologies. It provides a follow-up to "Advanced Mechatronics and MEMS Devices" (2013) with an exploration of the most up-to-date technologies and their applications, shown through examples that give readers insights and lessons learned from actual projects. Researchers on mechatronics, robotics, and MEMS as well as graduate students in mechanical engineering will find chapters on: Fundamental design and working principles on MEMS accelerometers Innovative mobile technologies Force/tactile sensors development Control schemes for reconfigurable robotic systems Inertial microfluidics Piezoelectric force sensors and dynamic calibration techniques ...And more. Authors explore applications in the areas of agriculture, biomedicine, advanced manufacturing, and space. Micro-assembly for current and future industries is also considered, as well as the design and development of micro and intel...

Nuclear innovation in Saskatchewan: innovation

International Nuclear Information System (INIS)

Alexander, N.

2015-01-01

This paper describes nuclear innovation in Saskatchewan. The first stage is the Canadian Institute for Science and Innovation Policy (CSIP) and how you have a successful discussion about a technically complex issue, understand what information people need in order to have an informed discussion, understand how to convey that information to those people in a constructive way.

Orchestrating innovation

NARCIS (Netherlands)

Berkers, F.T.H.M.; Klein Woolthuis, R.J.A.; Boer, J. de

2015-01-01

Orchestrating Innovation increases the probability of success, minimizing the probability of failure of technological innovations by creating sustained societal and economic value. Orchestrating innovation propagates to take into account and actively involve all relevant stakeholders of the (future)

Framing Innovation

DEFF Research Database (Denmark)

Haase, Louise Møller; Laursen, Linda Nhu

2017-01-01

Designing a remarkable product innovation is a difficult challenge, which businesses today continuously are striving to tackle. This challenge is particularly present in the early phase of innovation, where the main product concept and frames of the innovation is determined. As a main challenge...... in the early phase is the reasoning process; innovation team are faced with open-ended ill-defines problems, where they need to make decisions about an unknown future having only incomplete, ambiguous and contradicting insights available. We study the reasoning of experts, how they frame to make sense of all...... the insights and create a basis for decision making in relation to a new project. Based on case studies of five innovative products from various industries, we suggest a Product Reasoning Model for understanding reasoning and envisioning of new product innovations in the early phases...

Sensitive innovation

DEFF Research Database (Denmark)

Søndergaard, Katia Dupret

Present paper discusses sources of innovation as heterogenic and at times intangible processes. Arguing for heterogeneity and intangibility as sources of innovation originates from a theoretical reading in STS and ANT studies (e.g. Callon 1986, Latour 1996, Mol 2002, Pols 2005) and from field work...... in the area of mental health (Dupret Søndergaard 2009, 2010). The concept of sensitive innovation is developed to capture and conceptualise exactly those heterogenic and intangible processes. Sensitive innovation is therefore primarily a way to understand innovative sources that can be......, but are not necessarily, recognized and acknowledged as such in the outer organisational culture or by management. The added value that qualifies these processes to be defined as “innovative” are thus argued for along different lines than in more traditional innovation studies (e.g. studies that build on the classic...

Neural basis of scientific innovation induced by heuristic prototype.

Directory of Open Access Journals (Sweden)

Junlong Luo

Full Text Available A number of major inventions in history have been based on bionic imitation. Heuristics, by applying biological systems to the creation of artificial devices and machines, might be one of the most critical processes in scientific innovation. In particular, prototype heuristics propositions that innovation may engage automatic activation of a prototype such as a biological system to form novel associations between a prototype's function and problem-solving. We speculated that the cortical dissociation between the automatic activation and forming novel associations in innovation is critical point to heuristic creativity. In the present study, novel and old scientific innovations (NSI and OSI were selected as experimental materials in using learning-testing paradigm to explore the neural basis of scientific innovation induced by heuristic prototype. College students were required to resolve NSI problems (to which they did not know the answers and OSI problems (to which they knew the answers. From two fMRI experiments, our results showed that the subjects could resolve NSI when provided with heuristic prototypes. In Experiment 1, it was found that the lingual gyrus (LG; BA18 might be related to prototype heuristics in college students resolving NSI after learning a relative prototype. In Experiment 2, the LG (BA18 and precuneus (BA31 were significantly activated for NSI compared to OSI when college students learned all prototypes one day before the test. In addition, the mean beta-values of these brain regions of NSI were all correlated with the behavior accuracy of NSI. As our hypothesis indicated, the findings suggested that the LG might be involved in forming novel associations using heuristic information, while the precuneus might be involved in the automatic activation of heuristic prototype during scientific innovation.

Neural basis of scientific innovation induced by heuristic prototype.

Science.gov (United States)

Luo, Junlong; Li, Wenfu; Qiu, Jiang; Wei, Dongtao; Liu, Yijun; Zhang, Qinlin

2013-01-01

A number of major inventions in history have been based on bionic imitation. Heuristics, by applying biological systems to the creation of artificial devices and machines, might be one of the most critical processes in scientific innovation. In particular, prototype heuristics propositions that innovation may engage automatic activation of a prototype such as a biological system to form novel associations between a prototype's function and problem-solving. We speculated that the cortical dissociation between the automatic activation and forming novel associations in innovation is critical point to heuristic creativity. In the present study, novel and old scientific innovations (NSI and OSI) were selected as experimental materials in using learning-testing paradigm to explore the neural basis of scientific innovation induced by heuristic prototype. College students were required to resolve NSI problems (to which they did not know the answers) and OSI problems (to which they knew the answers). From two fMRI experiments, our results showed that the subjects could resolve NSI when provided with heuristic prototypes. In Experiment 1, it was found that the lingual gyrus (LG; BA18) might be related to prototype heuristics in college students resolving NSI after learning a relative prototype. In Experiment 2, the LG (BA18) and precuneus (BA31) were significantly activated for NSI compared to OSI when college students learned all prototypes one day before the test. In addition, the mean beta-values of these brain regions of NSI were all correlated with the behavior accuracy of NSI. As our hypothesis indicated, the findings suggested that the LG might be involved in forming novel associations using heuristic information, while the precuneus might be involved in the automatic activation of heuristic prototype during scientific innovation.

The 'CETO' wave power generation devices

Energy Technology Data Exchange (ETDEWEB)

Profitt, Michael

2007-07-01

Renewable Energy Holdings plc (REH) is an international company established to be an operator of, and undertake active investments in both proven and innovative renewable energy technologies. The CETO devices have been developed in Western Australia by Seapower Pacific PTY Ltd (SPPL), a subsidiary of Renewable Energy Holdings Plc (REH). This paper reports on the technology and also includes the findings from an independent technical appraisal undertaken by PB Power. The CETO device consists primarily of a novel pump anchored to the seabed and driven by a spherical buoyant actuator that collects wave energy and transmits it to the pump. High pressure seawater is delivered ashore where it can be used to drive a turbine to generate electricity or passed through a reverse osmosis desalination unit to produce fresh water. The competitive edge of CETO against other current wave and tidal generation devices: Electricity generated onshore (using well-proven hydro-power technology); Low cost mass produced device; Simplified infrastructure from pumping pressurised sea water ashore rather than electricity; Allows shore-based desalination; Modular design and self deployment; and, Transport in standard containers.

A laser induced breakdown spectroscopy (LIBS) based ion specific sensor for quantifying io levels in haemodialysis; an innovation of the Van 't Hoff program

NARCIS (Netherlands)

Amelink, A.; Westerlaken, A.C.

2014-01-01

The Van ‘t Hoff program is a new collaborative research and innovation program, initiated by TNO, in the field of biomedical optics. The Van ‘t Hoff program aims to improve medical diagnosis and therapy through development of innovative medical devices based on photonics and biomedical technologies.

Biophotonics-based strategies for improving Alzheimer’s and Parkinson’s disease diagnosis and monitoring: two innovative approaches by the Van ‘t Hoff program

NARCIS (Netherlands)

Amelink, A.; Westerlaken, A.C.; Boer, B.M. de

2015-01-01

The Van ‘t Hoff program is a new collaborative research and innovation program, initiated by TNO, in the field of biomedical optics. The Van ‘t Hoff program aims to improve medical diagnosis and therapy through development of innovative medical devices based on photonics and biomedical technologies.

Advanced Materials for Health Monitoring with Skin-Based Wearable Devices.

Science.gov (United States)

Jin, Han; Abu-Raya, Yasmin Shibli; Haick, Hossam

2017-06-01

Skin-based wearable devices have a great potential that could result in a revolutionary approach to health monitoring and diagnosing disease. With continued innovation and intensive attention to the materials and fabrication technologies, development of these healthcare devices is progressively encouraged. This article gives a concise, although admittedly non-exhaustive, didactic review of some of the main concepts and approaches related to recent advances and developments in the scope of skin-based wearable devices (e.g. temperature, strain, biomarker-analysis werable devices, etc.), with an emphasis on emerging materials and fabrication techniques in the relevant fields. To give a comprehensive statement, part of the review presents and discusses different aspects of these advanced materials, such as the sensitivity, biocompatibility and durability as well as the major approaches proposed for enhancing their chemical and physical properties. A complementary section of the review linking these advanced materials with wearable device technologies is particularly specified. Some of the strong and weak points in development of each wearable material/device are highlighted and criticized. Several ideas regarding further improvement of skin-based wearable devices are also discussed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Open Innovation or Innovation in the Open? An Exploration of the Strategy–Innovation Link in Five Scale-Intensive Services

OpenAIRE

Breunig, Karl Joachim; Aas, Tor Helge; Hydle, Katja Maria

2016-01-01

This chapter explores the strategy–innovation link in open service innovations. The increased attention to the role of the firm's external environment on innovation has important implications for strategy. However, our literature review reveals that the strategy–innovation link is ambiguously treated in extant theory, especially with respect to open- and service-innovations. Therefore, we inductively explore innovation practices in five large scale-intensive service firms to establish the lin...

Business Process Innovation using the Process Innovation Laboratory

DEFF Research Database (Denmark)

Møller, Charles

for practical applications has not been identified. The aim of this paper is to establish a conceptual framework for business process innovation in the supply chain based on advanced enterprise systems. The main approach to business process innovation in this context is to create a new methodology for exploring...... process models and patterns of applications. The paper thus presents a new concept for business process innovation called the process innovation laboratory a.k.a. the ?-Lab. The ?-Lab is a comprehensive framework for BPI using advanced enterprise systems. The ?-Lab is a collaborative workspace...... for experimenting with process models and an explorative approach to study integrated modeling in a controlled environment. The ?-Lab facilitates innovation by using an integrated action learning approach to process modeling including contemporary technological, organizational and business perspectives....

Health Physics Innovations Developed During Cassini for Future Space Applications

Science.gov (United States)

Nickell, Rodney E.; Rutherford, Theresa M.; Marmaro, George M.

1999-01-01

The long history of space flight includes missions that used Space Nuclear Auxiliary Power devices, starting with the Transit 4A Spacecraft (1961), continuing through the Apollo, Pioneer, Viking, Voyager, Galileo, Ulysses, Mars Pathfinder, and most recently, Cassini (1997). All Major Radiological Source (MRS) missions were processed at Kennedy Space Center/Cape Canaveral Air Station (KSC/CCAS) Launch Site in full compliance with program and regulatory requirements. The cumulative experience gained supporting these past missions has led to significant innovations which will be useful for benchmarking future MRS mission ground processing. Innovations developed during ground support for the Cassini mission include official declaration of sealed-source classifications, utilization of a mobile analytical laboratory, employment of a computerized dosimetry record management system, and cross-utilization of personnel from related disciplines.

Electrochemical energy engineering: a new frontier of chemical engineering innovation.

Science.gov (United States)

Gu, Shuang; Xu, Bingjun; Yan, Yushan

2014-01-01

One of the grand challenges facing humanity today is a safe, clean, and sustainable energy system where combustion no longer dominates. This review proposes that electrochemical energy conversion could set the foundation for such an energy system. It further suggests that a simple switch from an acid to a base membrane coupled with innovative cell designs may lead to a new era of affordable electrochemical devices, including fuel cells, electrolyzers, solar hydrogen generators, and redox flow batteries, for which recent progress is discussed using the authors' work as examples. It also notes that electrochemical energy engineering will likely become a vibrant subdiscipline of chemical engineering and a fertile ground for chemical engineering innovation. To realize this vision, it is necessary to incorporate fundamental electrochemistry and electrochemical engineering principles into the chemical engineering curriculum.

Innovative financing for health: what is truly innovative?

Science.gov (United States)

Atun, Rifat; Knaul, Felicia Marie; Akachi, Yoko; Frenk, Julio

2012-12-08

Development assistance for health has increased every year between 2000 and 2010, particularly for HIV/AIDS, tuberculosis, and malaria, to reach US$26·66 billion in 2010. The continued global economic crisis means that increased external financing from traditional donors is unlikely in the near term. Hence, new funding has to be sought from innovative financing sources to sustain the gains made in global health, to achieve the health Millennium Development Goals, and to address the emerging burden from non-communicable diseases. We use the value chain approach to conceptualise innovative financing. With this framework, we identify three integrated innovative financing mechanisms-GAVI, Global Fund, and UNITAID-that have reached a global scale. These three financing mechanisms have innovated along each step of the innovative finance value chain-namely resource mobilisation, pooling, channelling, resource allocation, and implementation-and integrated these steps to channel large amounts of funding rapidly to low-income and middle-income countries to address HIV/AIDS, malaria, tuberculosis, and vaccine-preventable diseases. However, resources mobilised from international innovative financing sources are relatively modest compared with donor assistance from traditional sources. Instead, the real innovation has been establishment of new organisational forms as integrated financing mechanisms that link elements of the financing value chain to more effectively and efficiently mobilise, pool, allocate, and channel financial resources to low-income and middle-income countries and to create incentives to improve implementation and performance of national programmes. These mechanisms provide platforms for health funding in the future, especially as efforts to grow innovative financing have faltered. The lessons learnt from these mechanisms can be used to develop and expand innovative financing from international sources to address health needs in low-income and middle

Finland: Innovation Policy Tools under National Innovation System Crisis

Directory of Open Access Journals (Sweden)

Daria A. Vorobeva

2017-01-01

Full Text Available Purpose: the for a long time Finland’s national innovation system (NIS had been being one of the most successful and effective in the world. But some years ago the situation changed: Finland’s NIS run into system crisis. And today Finnish government tries to work out anticrisis innovation policy. So the purpose of this article is to show up the innovation policy instruments which are able put an end to the crisis and to determine conditions of their successful use. Methods: the article is based on the national innovation systems concept and government policy-mix aimed at the NIS development. Results: the authors show up how Finnish government looks for optimal policy-mix to overcome the crisis, demonstrate in details complementary components of the relevant innovation policy, describe conditions for their success and effectiveness to consider whether they are useful in other countries. Conclusions and Relevance: to overcome the NIS crisis the Finnish government uses such instruments as strategic programs of socio-economic development with targets which can’t be achieved without adequate high technology and innovative development complemented by incentives to make business innovate actively. The conditions of such policy success are: 1 such feature of Finnish society as all stakeholders of economic development consensus on one issue: the main factor of development are innovations; 2 anticrisis stage of Finnish innovative policy is based previously accumulated knowledge and know-how. 

Innovation in cardiovascular disease in Europe with focus on arrhythmias: current status, opportunities, roadblocks, and the role of multiple stakeholders.

Science.gov (United States)

Prinzen, Frits W; Dagres, Nikolaos; Bollmann, Andreas; Arnar, David O; Bove, Sylvie; Camm, John; Casadei, Barbara; Kirchhof, Paulus; Kuck, Karl-Heinz; Lumens, Joost; Michel, Martin C; Schwartz, Peter J; Van Vleymen, Betty; Vardas, Panos; Hindricks, Gerhard

2018-05-01

The European Heart Rhythm Association (EHRA) held an Innovation Forum in February 2016, to consider issues around innovation. The objective of the forum was to extend the innovation debate outside of the narrow world of arrhythmia specialists and cardiology in general, and seek input from all stakeholders including regulators, strategists, technologists, industry, academia, health providers, medical societies, payers, and patients. Innovation is indispensable for a continuing improvement in health care, preferably at higher efficacy and lower costs. It requires people who have been trained in a good scientific environment, high-quality research for achieving ground breaking inventions and the certainty of return on innovation investments. In the context of cardiovascular disease, innovation can imply better risk assessment and stratification, device technology, drug development, and process design. Several areas of promising developments were identified as well as several roadblocks to innovation. To drive innovation forward all stakeholders need to play a significant role. In a globalized and extremely competitive world, the leading role of Europe in medical innovation can only be achieved through a combined and well-coordinated effort from all involved parties.

Knowledge Base, Exporting Activities, Innovation Openness and Innovation Performance

OpenAIRE

Spyros Arvanitis; Areti Gkypali; Kostas Tsekouras

2014-01-01

In this paper we demonstrate the complexity that regulates the innovation-exports nexus. In particular we argue that innovation and exports should be treated as latent variables in order to account for as many facets possible thus, accounting for multifaceted heterogeneity. In this context, the role of innovation openness ought to be highlighted within a unified framework, as it is considered an additional activity of firms’ knowledge creation strategy. In this line, innovation and exporting ...

ON THE ECONOMIC ESSENCE CONCEPT INNOVATION AND INNOVATION IN LAND TENURE

Directory of Open Access Journals (Sweden)

Tretyak A.M.

2016-08-01

Full Text Available Transformation processes that take place at the present stage in Ukraine's economy, connected with the formation of innovative development model, which is directly based on obtaining of the new scientific results and their technological implementation in production, зproviding a real GDP increase is mainly due to the production and sale of high technology products. It is characterized by the presence of government policy and legislation designed to stimulate of innovation processes, the prevalence of intellectual nature of work on industrial and integrated technologies. Therefore, in performing the tasks to ensure the dynamic development of the economy's primary role is played by innovation and innovation activities. Innovative economy (knowledge economy, intellectual economy – type of economy based on innovation stream, on constant technological improvement, in manufacturing and exporting of high technology products with a high added value and themselves technologies. It is assumed that this is mainly income creates intelligence of innovators and scientists, information sphere, rather than material production (industrial economy and not the concentration of finance (capital. Innovative Economy includes six main components: education; science; human capital, including high quality of life and highly qualified specialists; innovation systemthat includes legislative framework and material components of the innovation system (technology transfer centers, business incubators, technology parks, technopolises, innovation centers, clusters, territory of development of high technology venture business etc.; innovative industry that implements innovations; favorable environment of functioning of scientific and educational system, work and life of innovators. The number of major components of an effective innovation economy in land management can be reduced to four: high-quality scientific and educational system in the broad definition; effective

Innovation Production Models

Directory of Open Access Journals (Sweden)

Tamam N. Guseinova

2016-01-01

Full Text Available The article is dedicated to the study of the models of production of innovations at enterprise and state levels. The shift towards a new technology wave induces a change in systems of division of labour as well as establishment of new forms of cooperation that are reflected both in theory and practice of innovation policy and management. Within the scope of the research question we have studied different generation of innovation process, starting with simple linear models - "technology push" and "market pull" - and ending with a complex integrated model of open innovations. There are two organizational models of innovation production at the enterprise level: start-ups in the early stages of their development and ambidextrous organizations. The former are prone to linear models of innovation process, while the latter create innovation within more sophisticated inclusive processes. Companies that effectuate reciprocal ambidexterity stand out from all the rest, since together with start-ups, research and development centres, elements of innovation infrastructure and other economic agents operating in the same value chain they constitute the core of most advanced forms of national innovation systems, namely Triple Helix and Quadruple Helix systems. National innovation systems - models of innovation production at the state level - evolve into systems with a more profound division of labour that enable "line production" of innovations. These tendencies are closely related to the advent and development of the concept of serial entrepreneurship that transforms entrepreneurship into a new type of profession. International experience proves this concept to be efficient in various parts of the world. Nevertheless, the use of above mentioned models and concepts in national innovation system should be justified by socioeconomic conditions of economic regions, since they determine the efficiency of implementation of certain innovation processes and

Innovative use of power integrated modules for DC power supplies

DEFF Research Database (Denmark)

Ørndrup Nielsen, Rasmus; Elkiær, Alexander; Munk-Nielsen, Stig

2013-01-01

In this article several innovative ways of utilizing Power Integrated Modules (PIM) as switching device in a DC power supply are presented. PIM have advantages in compactness of design, cost and fast prototype due to easier PCB layout. A PIM converter topology is chosen and designed resulting...... in an experimental setup. Results from the setup are presented showing the feasibility of using a PIM module as almost all power semiconductors in a DC power supply....

FY10 Engineering Innovations, Research and Technology Report

Energy Technology Data Exchange (ETDEWEB)

Lane, M A; Aceves, S M; Paulson, C N; Candy, J V; Bennett, C V; Carlisle, K; Chen, D C; White, D A; Bernier, J V; Puso, M A; Weisgraber, T H; Corey, B; Lin, J I; Wheeler, E K; Conway, A M; Kuntz, J D; Spadaccini, C M; Dehlinger, D A; Kotovsky, J; Nikolic, R; Mariella, R P; Foudray, A K; Tang, V; Guidry, B L; Ng, B M; Lemmond, T D; Chen, B Y; Meyers, C A; Houck, T L

2011-01-11

This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory's Engineering Directorate for FY2010. These efforts exemplify Engineering's nearly 60-year history of developing and applying the technology innovations needed for the Laboratory's national security missions, and embody Engineering's mission to ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Leading off the report is a section featuring compelling engineering innovations. These innovations range from advanced hydrogen storage that enables clean vehicles, to new nuclear material detection technologies, to a landmine detection system using ultra-wideband ground-penetrating radar. Many have been recognized with R&D Magazine's prestigious R&D 100 Award; all are examples of the forward-looking application of innovative engineering to pressing national problems and challenging customer requirements. Engineering's capability development strategy includes both fundamental research and technology development. Engineering research creates the competencies of the future where discovery-class groundwork is required. Our technology development (or reduction to practice) efforts enable many of the research breakthroughs across the Laboratory to translate from the world of basic research to the national security missions of the Laboratory. This portfolio approach produces new and advanced technological capabilities, and is a unique component of the value proposition of the Lawrence Livermore Laboratory. The balance of the report highlights this work in research and technology, organized into thematic technical areas: Computational Engineering; Micro/Nano-Devices and Structures; Measurement Technologies; Engineering Systems for Knowledge Discovery; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but

Political innovations

DEFF Research Database (Denmark)

Sørensen, Eva

2017-01-01

are mainly interested in assessing and promoting innovations in public service delivery, but have paid little or no attention to the need for innovations in polity, politics and policy. This article develops a research agenda for studying innovations in political institutions, in the political process...... and in policy outputs. It proposes a number of research themes related to political innovations that call for scholarly attention, and identifies push and pull factors influencing the likelihood that these themes will be addressed in future research....

Trends in Microfabrication Capabilities & Device Architectures.

Energy Technology Data Exchange (ETDEWEB)

Bauer, Todd [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Adam [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lentine, Tony [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mudrick, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Okandan, Murat [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodrigues, Arun [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-06-01

The last two decades have seen an explosion in worldwide R&D, enabling fundamentally new capabilities while at the same time changing the international technology landscape. The advent of technologies for continued miniaturization and electronics feature size reduction, and for architectural innovations, will have many technical, economic, and national security implications. It is important to anticipate possible microelectronics development directions and their implications on US national interests. This report forecasts and assesses trends and directions for several potentially disruptive microfabrication capabilities and device architectures that may emerge in the next 5-10 years.

Science education with handheld devices: A comparison of Nintendo WiiMote and iPod touch for kinematics learning

OpenAIRE

Hochberg, K.; Kuhn, J.; Müller, A.

2016-01-01

Experiential science learning based on the in-built sensors of handheld devices such as smartphones, tablet computer and game consoles has seen quite a strong development in recent years. In particular, such devices with internal acceleration sensors offer an innovative approach to kinematics learning in classroom physics, a notoriously difficult topic for pupils. In view of research and teaching in this domain, the practical advantages and disadvantages of two such devices, the Nintendo WiiM...

Implementing Mobile Learning Curricula in Schools: A Programme of Research from Innovation to Scaling

Science.gov (United States)

Looi, Chee-Kit; Wong, Lung-Hsiang

2014-01-01

Many countries, regions and education districts in the world have experimented with models of one-device-per-student as an enabler of new or effective pedagogies supported by mobile technologies. Researchers have also designed innovations or interventions for possible adoption by schools or for informal learning. Of critical interest to the…

Electronic device for endosurgical skills training (EDEST): study of reliability.

Science.gov (United States)

Pagador, J B; Uson, J; Sánchez, M A; Moyano, J L; Moreno, J; Bustos, P; Mateos, J; Sánchez-Margallo, F M

2011-05-01

Minimally Invasive Surgery procedures are commonly used in many surgical practices, but surgeons need specific training models and devices due to its difficulty and complexity. In this paper, an innovative electronic device for endosurgical skills training (EDEST) is presented. A study on reliability for this device was performed. Different electronic components were used to compose this new training device. The EDEST was focused on two basic laparoscopic tasks: triangulation and coordination manoeuvres. A configuration and statistical software was developed to complement the functionality of the device. A calibration method was used to assure the proper work of the device. A total of 35 subjects (8 experts and 27 novices) were used to check the reliability of the system using the MTBF analysis. Configuration values for triangulation and coordination exercises were calculated as 0.5 s limit threshold and 800-11,000 lux range of light intensity, respectively. Zero errors in 1,050 executions (0%) for triangulation and 21 errors in 5,670 executions (0.37%) for coordination were obtained. A MTBF of 2.97 h was obtained. The results show that the reliability of the EDEST device is acceptable when used under previously defined light conditions. These results along with previous work could demonstrate that the EDEST device can help surgeons during first training stages.

Cybersecurity Regulation of Wireless Devices for Performance and Assurance in the Age of “Medjacking”

Science.gov (United States)

Armstrong, David G.; Kleidermacher, David N.; Klonoff, David C.; Slepian, Marvin J.

2015-01-01

We are rapidly reaching a point where, as connected devices for monitoring and treating diabetes and other diseases become more pervasive and powerful, the likelihood of malicious medical device hacking (known as “medjacking”) is growing. While government could increase regulation, we have all been witness in recent times to the limitations and issues surrounding exclusive reliance on government. Herein we outline a preliminary framework for establishing security for wireless health devices based on international common criteria. Creation of an independent medical device cybersecurity body is suggested. The goal is to allow for continued growth and innovation while simultaneously fostering security, public trust, and confidence. PMID:26319227

Incremental Innovation and Competitive Pressure in the Presence of Discrete Innovation

DEFF Research Database (Denmark)

Ghosh, Arghya; Kato, Takao; Morita, Hodaka

2017-01-01

Technical progress consists of improvements made upon the existing technology (incremental innovation) and innovative activities aiming at entirely new technology (discrete innovation). Incremental innovation is often of limited relevance to the new technology invented by successful discrete...

Collaborative innovation

DEFF Research Database (Denmark)

Torfing, Jacob; Sørensen, Eva; Hartley, Jean

2013-01-01

, which emphasizes market competition; the neo-Weberian state, which emphasizes organizational entrepreneurship; and collaborative governance, which emphasizes multiactor engagement across organizations in the private, public, and nonprofit sectors. The authors conclude that the choice of strategies......-driven private sector is more innovative than the public sector by showing that both sectors have a number of drivers of as well as barriers to innovation, some of which are similar, while others are sector specific. The article then systematically analyzes three strategies for innovation: New Public Management......There are growing pressures for the public sector to be more innovative but considerable disagreement about how to achieve it. This article uses institutional and organizational analysis to compare three major public innovation strategies. The article confronts the myth that the market...

Accidental Innovation

DEFF Research Database (Denmark)

Austin, Robert D.; Devin, Lee; Sullivan, Erin E.

2012-01-01

Historical accounts of human achievement suggest that accidents can play an important role in innovation. In this paper, we seek to contribute to an understanding of how digital systems might support valuable unpredictability in innovation processes by examining how innovators who obtain value from...... they incorporate accidents into their deliberate processes and arranged surroundings. By comparing makers working in varied conditions, we identify specific factors (e.g., technologies, characteristics of technologies) that appear to support accidental innovation. We show that makers in certain specified...... conditions not only remain open to accident but also intentionally design their processes and surroundings to invite and exploit valuable accidents. Based on these findings, we offer advice for the design of digital systems to support innovation processes that can access valuable unpredictability....

Workplace innovation as an important driver of social innovation

NARCIS (Netherlands)

Oeij, P.R.A.; Dhondt, S.; Pot, F.; Totterdill, P.

2018-01-01

The project SI-DRIVE “Social Innovation: Driving Force of Social Change” includes a specific practice field within the policy domain of Employment, namely Workplace Innovation. Workplace Innovation can be positioned at the level of organisations and companies, where it has a significant effect on

Accelerating Innovation Through Coopetition: The Innovation Learning Network Experience.

Science.gov (United States)

McCarthy, Chris; Ford Carleton, Penny; Krumpholz, Elizabeth; Chow, Marilyn P

Coopetition, the simultaneous pursuit of cooperation and competition, is a growing force in the innovation landscape. For some organizations, the primary mode of innovation continues to be deeply secretive and highly competitive, but for others, a new style of shared challenges, shared purpose, and shared development has become a superior, more efficient way of working to accelerate innovation capabilities and capacity. Over the last 2 decades, the literature base devoted to coopetition has gradually expanded. However, the field is still in its infancy. The majority of coopetition research is qualitative, primarily consisting of case studies. Few studies have addressed the nonprofit sector or service industries such as health care. The authors believe that this article may offer a unique perspective on coopetition in the context of a US-based national health care learning alliance designed to accelerate innovation, the Innovation Learning Network or ILN. The mission of the ILN is to "Share the joy and pain of innovation," accelerating innovation by sharing solutions, teaching techniques, and cultivating friendships. These 3 pillars (sharing, teaching, and cultivating) form the foundation for coopetition within the ILN. Through the lens of coopetition, we examine the experience of the ILN over the last 10 years and provide case examples that illustrate the benefits and challenges of coopetition in accelerating innovation in health care.

National innovation system as a focus of state in-novation policy

Directory of Open Access Journals (Sweden)

Olexandr Fedirko

2007-02-01

Full Text Available The article offers a systematic review of tools and mechanisms utilised by developed countries (United States, Japan, EU to pursue their innovation policies, and classifies methods which support innovation and ways that help to strengthen the innovation capacity. It describes the evolution of research and development (R&D policy in other countries. The article examines arguments in support of a trend in the innovation policy which promotes the development of national innovation systems. It reviews the substance and components of the national innovation system. It also explores the trends of R&D cooperation. The article outlines the variety of domestic tools which regulate innovation in EU countries (framework programs, the European Research Area Initiative.

How do innovators stay innovative? A longitudinal case analysis

OpenAIRE

Tuzovic, Sven; Wirtz, Jochen; Heracleous, Loizos Th.

2018-01-01

Purpose – How can some companies be the innovation leader in their industry over prolonged periods of time, while others cannot? The purpose of this study is to understand a firm’s capability to be a successful serial innovator and to generate a constant stream of industry-leading innovations.\\ud \\ud Design/Methodology/Approach – The paper uses a longitudinal case study approach to gain an understanding of what and how Singapore Airlines (SIA) sustained service innovation for over 30 years. T...

Innovation hubs

DEFF Research Database (Denmark)

O´Hara, J.; Hansen, Poul H. Kyvsgård; Turner, N.

2008-01-01

"Whilst ‘incremental innovation' is an imperative for the short-to-medium term success of a company, there is also a need for companies to engage in innovation activity that goes beyond the incremental in order to guarantee long-term success. However, such ‘radical innovation' (RI) poses new chal...

Purchasing and Innovation

DEFF Research Database (Denmark)

Hanghøj, Astrid; Mols, Niels Peter

2015-01-01

In this paper we develop a number of hypotheses relating four purchasing capabilities to two measures of purchasings contribution to innovation. The hypotheses are tested with data collected through a websurvey completed by 321 purchasing professionals in Danish production companies. Our results...... show that integrative, relational, innovative,and intelligence capabilities are positively related to innovation. However, relational capabilities are not found to have significant effect on purchasings contribution to supply and practice innovation, i.e. new markets, new suppliers, and new purchasing...... practices. The relationship between intelligence capabilities and purchasings contribution to product and production innovations depends on the level of innovation capabilities....

A smart spirometry device for asthma diagnosis.

Science.gov (United States)

Kassem, A; Hamad, M; El Moucary, C

2015-08-01

In this paper an innovative prototype for smart asthma spirometry device to be used by doctors and asthma patients is presented. The novelty in this prototype relies in the fact that it is destined to subtend not only adults but offers an efficient and attractive manner to accommodate children patients as well thus, making it efficient for doctors, patients and parents to detect and monitor such intricate cases at stages as early as six years old. Moreover, the apparatus used enables us to integrate a vital parameter representing the Forced Expiratory Volume to the final diagnosis. Besides, the presented device will automatically diagnose those patients, assess their asthma condition, and schedule their medication process without excessive visits to medical centers whilst providing doctors with accurate and pertinent and comprehensive medical data in a chronological fashion. Zooming into under the hood of the device, a fully reliable hardware digital system lies along with a flowmeter detector and a Bluetooth emitter to interface with a user-friendly GUI-based application installed on smartphones which incorporates appealing animated graphics to encourage children to take the test. Furthermore, the device offers the capability of storing chronological data and a relevant resourceful display for accurate tracking of patients' medical record, the evolvement of their asthma condition, and the administered medication. Finally, the entire device is aligned with the medical requirements as per doctors' and telemedicine specialists' recommendations; the experiments carried out demonstrated the effectiveness and sustainable use of such device.

Convergent innovation for sustainable economic growth and affordable universal health care: innovating the way we innovate.

Science.gov (United States)

Dubé, Laurette; Jha, Srivardhini; Faber, Aida; Struben, Jeroen; London, Ted; Mohapatra, Archisman; Drager, Nick; Lannon, Chris; Joshi, P K; McDermott, John

2014-12-01

This paper introduces convergent innovation (CI) as a form of meta-innovation-an innovation in the way we innovate. CI integrates human and economic development outcomes, through behavioral and ecosystem transformation at scale, for sustainable prosperity and affordable universal health care within a whole-of-society paradigm. To this end, CI combines technological and social innovation (including organizational, social process, financial, and institutional), with a special focus on the most underserved populations. CI takes a modular approach that convenes around roadmaps for real world change-a portfolio of loosely coupled complementary partners from the business community, civil society, and the public sector. Roadmaps serve as collaborative platforms for focused, achievable, and time-bound projects to provide scalable, sustainable, and resilient solutions to complex challenges, with benefits both to participating partners and to society. In this paper, we first briefly review the literature on technological innovation that sets the foundations of CI and motivates its feasibility. We then describe CI, its building blocks, and enabling conditions for deployment and scaling up, illustrating its operational forms through examples of existing CI-sensitive innovation. © 2014 The New York Academy of Sciences.

Supplier Innovation

DEFF Research Database (Denmark)

Søberg, Peder Veng; Notman, Dorian Mark; Wæhrens, Brian Vejrum

2017-01-01

The prevailing research in supplier innovation has been conceptual or based on small data sets. The analysis of a large data set gives a clearer perspective on the actual type and degree of involvement of suppliers in the customer’s innovation process. The supplier perspective of the research...... counterbalances the customer bias that exists in the prevailing literature in this area. Similarly, the issue of the benefit of supplier involvement in the innovation/NPD process can be better understood. Manufacturing suppliers benefit financially from their involvement in the innovation/NPD process of their key...

Reputation for technological innovation: Does it actually cohere with innovative activity?

Directory of Open Access Journals (Sweden)

Patrick J. Höflinger

2018-01-01

Full Text Available Firms strategically promote, foster and pursue a reputation for technological innovation. Yet, present research did not examine whether such perception actually coheres with innovative activity itself. Previous studies in this field often relied solely on tangible products/product introductions, hence we apply multiple proxies based on a firm's intangible innovative performance to examine the influences on reputation for technological innovation. Using patent, financial and consumer data our Poisson regression analyzes 65 international firms which have been nominated by 231 consumers. We apply time-series and likewise cross-sectional data for our interdisciplinary analysis. Our findings demonstrate that innovative performance (citation intensity is linked to reputation for technological innovation. Counter-intuitively, our results provide evidence that marketing intensity negatively influences a reputation for technological innovation. From the results, we conclude that innovative performance may be associated with a reputation for technological innovation. Actual technological advancement attracts attention from consumers that cannot be purchased with greater marketing investments. This implies that consumers appreciate the costly and uncertain R&D efforts and value those firms that constantly offer innovation. As a theoretical implication, the consideration of intangible inputs for reputation research is an important contribution for a holistic understanding. The results represent essential strategic information for innovation and marketing functions, where both divisions need to align their activities and investments.

Measuring Consumer Innovativeness: Identifying Innovators among Consumers of Modern Technologies

Directory of Open Access Journals (Sweden)

Jana Filová

2015-12-01

Full Text Available The methods currently used in innovation marketing research are focused on the late phases of the innovation process and are usually methodologically complex. This limits their practical impact. The presented work aims to create a simple self-report scale applicable in the initial and late phases of the innovation process, highly modular and suitable for a wide range of research. The main battery of questions was inspired by the adopter categorization by Rogers. The questions determine both (1 general characteristics of innovation adopters and (2 their relationship to a specific innovation. The scale was tested during robust longitudinal online research, thematically focused on users of modern technologies. A representative sample of 4,000 Internet users in the Czech Republic took part in the survey from 2013 to 2015. The result is a new self-report scale measuring consumer innovativeness applicable for prototyping, strategic decisions and effective communication of innovations to consumers.

Brugerdreven innovation

DEFF Research Database (Denmark)

Helms, Niels Henrik; Larsen, Lasse Juel

2007-01-01

På et generelt plan er vores afsæt et opgør med traditionelle modeller for kreativitet og innovation. Artiklen mener, at brugerdreven innovation ikke bare en god idé, men en beskrivelse af, hvordan innovation finder sted. Vores afsæt er interaktionsdesign, hvor vi bygger på den antagelse...

Thomas Alva Edison—battery and device innovation in response to application's needs

Science.gov (United States)

Salkind, Alvin J.; Israel, Paul

Thomas Alva Edison, the most prolific inventor in North America, with over 1000 patents, was the descendant of early settlers from the Netherlands to the Hudson Valley region of New York/New Jersey. However, his genealogical trail encompasses many cities, provinces, states, and countries, including Holland, France, Scotland, New Amsterdam, New York, New Jersey, Nova Scotia, Ontario, Ohio, and Michigan. He was motivated to develop and invent in response to perceived needs of commercial devices and was the creator of the concept of an industrial research laboratory. His activities covered a wide-range of chemical, electrical, medical, metallurgical, entertainment, and communication devices and led to the creation of major worldwide industries. However, his expressed underlying concern was the "service it might give others". This presentation reviews commercial developments in comparison with the technologies and motivations of the time and is illustrated by material from the Rutgers University 'Edison Papers Project', Edison's personal notes found in the Edison Battery Factory and preserved by Professor Salkind, and records of The Electrochemical Society.

ICT innovations for sustainability

CERN Document Server

Aebischer, Bernard

2015-01-01

ICT Innovations for Sustainability is an investigation of how information and communication technology can contribute to sustainable development. It presents clear definitions of sustainability, suggesting conceptual frameworks for the positive and negative effects of ICT on sustainable development. It reviews methods of assessing the direct and indirect impact of ICT systems on energy and materials demand, and examines the results of such assessments. In addition, it investigates ICT-based approaches to supporting sustainable patterns of production and consumption, analyzing them at various levels of abstraction – from end-user devices, Internet infrastructure, user behavior, and social practices to macro-economic indicators.   Combining approaches from Computer Science, Information Systems, Human-Computer Interaction, Economics, and Environmental Sciences, the book presents a new, holistic perspective on ICT for Sustainability (ICT4S). It is an indispensable resource for anyone working in the area of ICT...

Bridgework ahead! Innovation ecosystems vis-à-vis responsible innovation

International Nuclear Information System (INIS)

Foley, Rider; Wiek, Arnim

2017-01-01

Public funding agencies largely support academic research as an effort to stimulate future product commercialization and foster broader societal benefits. Yet, translating research nurtured in academic settings into such outcomes is complex and demands functional interactions between government, academic, and industry, i.e., “triple helix,” organizations within an innovation ecosystem. This article argues that in the spirit of responsible innovation, research funding should build bridges that extend beyond the triple helix stakeholders to connect to peripheral organizations. To support that argument, evidence from agent network analysis gathered from two case studies reveals strong and weak connections, as well as gaps within innovation ecosystems in Switzerland and metropolitan Phoenix, USA. This article offers insights on how innovation ecosystems are aligned or misaligned with responsible innovation.

Bridgework ahead! Innovation ecosystems vis-à-vis responsible innovation

Energy Technology Data Exchange (ETDEWEB)

Foley, Rider, E-mail: rwf6v@virginia.edu [University of Virginia, Engineering and Society, School of Engineering and Applied Science (United States); Wiek, Arnim [Arizona State University, Center for Nanotechnology in Society, Consortium for Science, Policy & Outcomes (United States)

2017-02-15

Public funding agencies largely support academic research as an effort to stimulate future product commercialization and foster broader societal benefits. Yet, translating research nurtured in academic settings into such outcomes is complex and demands functional interactions between government, academic, and industry, i.e., “triple helix,” organizations within an innovation ecosystem. This article argues that in the spirit of responsible innovation, research funding should build bridges that extend beyond the triple helix stakeholders to connect to peripheral organizations. To support that argument, evidence from agent network analysis gathered from two case studies reveals strong and weak connections, as well as gaps within innovation ecosystems in Switzerland and metropolitan Phoenix, USA. This article offers insights on how innovation ecosystems are aligned or misaligned with responsible innovation.

Teaching and Learning with Mobile Technology: A Qualitative Explorative Study about the Introduction of Tablet Devices in Secondary Education.

Science.gov (United States)

Montrieux, Hannelore; Vanderlinde, Ruben; Schellens, Tammy; De Marez, Lieven

2015-01-01

This paper investigates teachers' and students' perceptions concerning the impact of using tablet devices for teaching and learning purposes. An explorative focus group study was conducted with teachers (n = 18) and students (n = 39) in a secondary school that has implemented tablet devices since 2012. The general finding of this study shows that the use of tablet devices in the classroom setting has an impact on both teaching and learning practices. The results suggest that teachers can be divided into two categories: the innovative teachers and the instrumental teachers. Innovative teachers attempt to shift from a teacher-centered to a learning-centered approach. They have changed their teaching style by transforming lessons in accordance with the advantages tablet computers can offer. Instrumental teachers seem to use the device as a 'book behind glass'. The distinction between the two groups has consequences for both the way courses are given and how students experience them. In general, the introduction of tablet devices entails a shift in the way students learn, as the devices provide interactive, media-rich, and exciting new environments. The results of this study indicate that policy makers should consider introducing technical and pedagogical support in order to facilitate both teachers' and students' understanding of the full potential of this kind of technology in education.

MAPPING INNOVATION

DEFF Research Database (Denmark)

Thuesen, Christian Langhoff; Koch, Christian

2011-01-01

By adopting a theoretical framework from strategic niche management research (SNM) this paper presents an analysis of the innovation system of the Danish Construction industry. Theories within SNM look upon innovation in a sector as a socio-technical phenomenon and identifies three levels of socio......-technical interaction within which sectorial innovation can be explained. The analysis shows a multifaceted landscape of innovation around an existing regime, built in the existing ways of working and developing over generations. The regime is challenged from various niches and the sociotechnical landscape through...... trends as globalization. Three niches (Lean Construction, BIM and System Deliveries) are subject to a detailed analysis showing partly incompatible rationales and various degrees of innovation potential. The paper further discusses how existing policymaking operates in a number of tensions one being...

Coexistence of nonvolatility and volatility in Pt/Nb-doped SrTiO3/In memristive devices

International Nuclear Information System (INIS)

Yang, M; Bao, D H; Li, S W

2013-01-01

Memristive devices are triggering innovations in the fields of nonvolatile memory, digital logic, analogue circuits, neuromorphic engineering, and so on. Creating new memristive devices with unique characteristics would be significant for these emergent applications. Here we report the coexistence of nonvolatility and volatility in Pt/Nb-doped SrTiO 3 (NSTO)/In memristive devices. The Pt/NSTO interface contributes a nonvolatile resistive switching behaviour, whereas the NSTO/In interface displays a volatile hysteresis loop. Combining the two interfaces in the Pt/NSTO/In devices leads to the unique coexistence of nonvolatility and volatility. The results imply more opportunities to invent new memristive devices by engineering both interfaces in metal/insulator/metal structures. (paper)

Innovation and efficiency

Energy Technology Data Exchange (ETDEWEB)

Haustein, H D; Maier, H

1979-01-01

Innovation, the process of creation, development, use, and diffusion of a new product or process for new or already-identified needs, has become a topic of concern for both developed and developing countries. Although the causes and motivations for the concern differ widely from country to country, the development of effective innovation policies is a universal problem. The International Institute for Applied Systems Analysis (IIASA) has been concerned with this problem for several years. The main purpose of an innovation is to improve the efficiency of the production unit that adopts the innovation, in comparison with the efficiency of the entire production system. To grasp the nature of the innovation process, its impact on the economic performance of the country, and to identify the appropriate managerial actions to shape and stimulate the innovation process, five different stages through which the innovation process usually runs are outlined. The IIASA has been concerned with supplanting the former approach of spontaneous innovation with a systems analysis approach to help implement new forms of social, innovative learning to be beneficial to mankind. 7 references, 2 figures, 1 table. (SAC)

Technology for Innovation in Radiation Oncology

Energy Technology Data Exchange (ETDEWEB)

Chetty, Indrin J. [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Martel, Mary K., E-mail: mmartel@mdanderson.org [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Jaffray, David A. [Departments of Radiation Oncology and Medical Biophysics, Princess Margaret Hospital, Toronto, Ontario (Canada); Benedict, Stanley H. [Department of Radiation Oncology, University of California – Davis Cancer Center, Sacramento, California (United States); Hahn, Stephen M. [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Berbeco, Ross [Department of Radiation Oncology, Brigham and Women' s Hospital, Boston, Massachusetts (United States); Deye, James [Radiation Research Programs, National Cancer Institute, Bethesda, Maryland (United States); Jeraj, Robert [Department of Medical Physics, University of Wisconsin, Madison, Wisconsin (United States); Kavanagh, Brian [Department of Radiation Oncology, University of Colorado, Aurora, Colorado (United States); Krishnan, Sunil [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Lee, Nancy [Department of Radiation Oncology, Memorial Sloan Kettering Cancer Center, New York, New York (United States); Low, Daniel A. [Department of Radiation Oncology, University of California – Los Angeles, Los Angeles, California (United States); Mankoff, David [Department of Radiology, University of Washington Medical School, Seattle, Washington (United States); Marks, Lawrence B. [Department of Radiation Oncology, University of North Carolina Hospitals, Chapel Hill, North Carolina (United States); Ollendorf, Daniel [Institute for Clinical and Economic Review, Boston, Massachusetts (United States); and others

2015-11-01

Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled “Technology for Innovation in Radiation Oncology,” which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic.

Technology for Innovation in Radiation Oncology

International Nuclear Information System (INIS)

Chetty, Indrin J.; Martel, Mary K.; Jaffray, David A.; Benedict, Stanley H.; Hahn, Stephen M.; Berbeco, Ross; Deye, James; Jeraj, Robert; Kavanagh, Brian; Krishnan, Sunil; Lee, Nancy; Low, Daniel A.; Mankoff, David; Marks, Lawrence B.; Ollendorf, Daniel

2015-01-01

Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled “Technology for Innovation in Radiation Oncology,” which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic.

Aligning for Innovation - Alignment Strategy to Drive Innovation

Science.gov (United States)

Johnson, Hurel; Teltschik, David; Bussey, Horace, Jr.; Moy, James

2010-01-01

With the sudden need for innovation that will help the country achieve its long-term space exploration objectives, the question of whether NASA is aligned effectively to drive the innovation that it so desperately needs to take space exploration to the next level should be entertained. Authors such as Robert Kaplan and David North have noted that companies that use a formal system for implementing strategy consistently outperform their peers. They have outlined a six-stage management systems model for implementing strategy, which includes the aligning of the organization towards its objectives. This involves the alignment of the organization from the top down. This presentation will explore the impacts of existing U.S. industrial policy on technological innovation; assess the current NASA organizational alignment and its impacts on driving technological innovation; and finally suggest an alternative approach that may drive the innovation needed to take the world to the next level of space exploration, with NASA truly leading the way.

Innovation through developing consumers’ community. Part I: Innovation in action

Science.gov (United States)

Gălăţanu (Avram, E.; Avasilcăi, S.

2015-11-01

Technological changes and need for innovation represents the main concerns for organizational growth and profitability. However the main priority is still about achieving high performance through product development and consumers' engagement activities. As implementation of open innovation applications increased and value co — creation became well known and major process, companies were engaged into value co — innovation activities. From this point of view the need for joint efforts with consumers in product development arose. Thus the primary condition for an organization to be consumer centric is to define clear the vision and mission which reflects the common efforts for co — creation and diffusion of innovation. As Research & Development processes evolved and interest for innovative concepts and products arose, companies started to implement the specific instruments for consumers' attraction and engagement into design and product development. The digitalized innovation became the main source for establishing the direct communication with the consumers. In order to achieve organization growth, profitability and recognition, the companies should be aware of the innovation importance and the need for internal change. From this point of view, there is necessary to assess the organizational structures, to implement new policies and to establish strategic targets. Basically it is justified the need for platform occurrence and development. Based on case study of BMW Group, recognised leader in automotive industry for innovative concepts, there will be analysed main features within organizational context which promotes the innovation implementation. There will be provided the review of the BMW Group experience of innovation activities, main consumers' engagement strategies, the values which promote the consumer — centric product development, new opportunities assessment, major policies and concerns. The foreseen result is to understand how companies are

Designing collaborative policy innovation

DEFF Research Database (Denmark)

Agger, Annika; Sørensen, Eva

2014-01-01

Recent approaches to enhancing public innovation suffer from two shortcomings: They overemphasize competition as a driver of innovation and overlook the fact that public sector innovation involves policy innovation as well as service innovation. Drawing on governance research and innovation theory......, the chapter investigates the extent to which and how collaboration between politicians and relevant stakeholders can spur the formulation, implementation and diffusion of new innovative policies. A case study of a process of collaborative policy innovation in a Danish municipality shows that collaborative...... policy arenas do contribute to policy innovation but also that the degree to which they do so depends on the institutional design of these arenas....

Organic Light-Emitting Transistors: Materials, Device Configurations, and Operations.

Science.gov (United States)

Zhang, Congcong; Chen, Penglei; Hu, Wenping

2016-03-09

Organic light-emitting transistors (OLETs) represent an emerging class of organic optoelectronic devices, wherein the electrical switching capability of organic field-effect transistors (OFETs) and the light-generation capability of organic light-emitting diodes (OLEDs) are inherently incorporated in a single device. In contrast to conventional OFETs and OLEDs, the planar device geometry and the versatile multifunctional nature of OLETs not only endow them with numerous technological opportunities in the frontier fields of highly integrated organic electronics, but also render them ideal scientific scaffolds to address the fundamental physical events of organic semiconductors and devices. This review article summarizes the recent advancements on OLETs in light of materials, device configurations, operation conditions, etc. Diverse state-of-the-art protocols, including bulk heterojunction, layered heterojunction and laterally arranged heterojunction structures, as well as asymmetric source-drain electrodes, and innovative dielectric layers, which have been developed for the construction of qualified OLETs and for shedding new and deep light on the working principles of OLETs, are highlighted by addressing representative paradigms. This review intends to provide readers with a deeper understanding of the design of future OLETs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Reading While Listening on Mobile Devices: An Innovative Approach to Enhance Reading

Science.gov (United States)

Rochdi, Aicha; Eppard, Jenny

2017-01-01

This poster session will describe a study that took place at a university in the United Arab Emirates. The study included a reading app that was downloaded onto each student's individual mobile device. Students could read while listening to the stories. The primary goal of the study was to determine how, if at all, listening while reading in a…

77 FR 43008 - Unlicensed Personal Communications Service Devices in the 1920-1930 MHz Band

Science.gov (United States)

2012-07-23

... rules require use of a ``spectrum etiquette'' that specifies a process for monitoring the time and... ``listen-before-transmit'' protocol). To protect UPCS devices already using particular time and spectrum... introduce innovative products and services using Internet protocol connectivity to combine access to...

Match your innovation strategy to your innovation ecosystem.

Science.gov (United States)

Adner, Ron

2006-04-01

High-definition televisions should, by now, be a huge success. Philips, Sony, and Thompson invested billions of dollars to develop TV sets with astonishing picture quality. From a technology perspective, they've succeeded: Console manufacturers have been ready for the mass market since the early 1990s. Yet the category has been an unmitigated failure, not because of deficiencies, but because critical complements such as studio production equipment were not developed or adopted in time. Under-performing complements have left console producers in the position of offering a Ferrari in a world without gasoline or highways--an admirable engineering feat, but not one that creates value for customers. The HDTV story exemplifies the promise and peril of innovation ecosystems--the collaborative arrangements through which firms combine their individual offers into a coherent, customer-facing solution. When they work, innovation ecosystems allow companies to create value that no one firm could have created alone. The benefits of these systems are real. But for many organizations the attempt at ecosystem innovation has been a costly failure. This is because, along with new opportunities, innovation ecosystems also present a new set of risks that can brutally derail a firm's best efforts. Innovation ecosystems are characterized by three fundamental types of risk: initiative risks--the familiar uncertainties of managing a project; interdependence risks--the uncertainties of coordinating with complementary innovators; and integration risks--the uncertainties presented by the adoption process across the value chain. Firms that assess ecosystem risks holistically and systematically will be able to establish more realistic expectations, develop a more refined set of environmental contingencies, and arrive at a more robust innovation strategy. Collectively, these actions will lead to more effective implementation and more profitable innovation.

User Innovation Management

DEFF Research Database (Denmark)

Kanstrup, Anne Marie; Bertelsen, Pernille

User Innovation Management (UIM) is a method for fo-opereation with users in innovation projects. The UIM method emphasizes the practice of a participatorty attitude.......User Innovation Management (UIM) is a method for fo-opereation with users in innovation projects. The UIM method emphasizes the practice of a participatorty attitude....

Logistic innovations in transport

Directory of Open Access Journals (Sweden)

Mirosław Antonowicz

2014-03-01

Full Text Available Introduction: The article discusses the issue of logistic innovations in transport. The essentials of logistic innovations in transport together with some examples of specific innovations are presented. The role of the client's needs in transport innovations is indicated. The most vital postulates affecting the innovativeness of shipping companies and derived from the author's experience as well as scholarly publications, are time, safety, reliability as well as comprehensiveness of service offer. Following the analysis of the issue, and on the grounds of Kaizen's and Lean's method, the concept of continuous innovations is suggested as very useful for the development of transport. The potential of clusters as the source of logistic innovations in transport is emphasised. Methods: The discussion of the issue was preceded by the author's analysis of written sources on innovativeness, the evaluation of ratings of innovativeness as well as the analysis of rewarded innovative solutions in transport subsequent to the businesses participation in the programme of innovative solutions in transport. The role of innovation practical business operations is argued following the analysis of some strategic documents such as: 2011 White Paper and the Strategy for the Development of Transport by 2020 adopted by the Polish government in 2013. Aim: The aim of the article is to present the role and significance of the issue of logistic innovations in transport and to cite instances of practical solutions implemented by shipping companies, the solutions which resulted in measurable effects. Following the author's observation of the instances of innovative solutions as well as his analysis of the ratings of innovativeness, the article aims to present the conclusions as for the specific kinds of activities which are indispensable to foster innovativeness in transport. Conclusions: The conclusions derived from the author's analyses and observations show that logistic

Energy transport in cooling device by magnetic fluid

Science.gov (United States)

Yamaguchi, Hiroshi; Iwamoto, Yuhiro

2017-06-01

Temperature sensitive magnetic fluid has a great potential with high performance heat transport ability as well as long distance energy (heat) transporting. In the present study experimental set-up was newly designed and constructed in order to measure basic heat transport characteristics under various magnetic field conditions. Angular dependence for the device (heat transfer section) was also taken into consideration for a sake of practical applications. The energy transfer characteristic (heat transport capability) in the magnetically-driven heat transport (cooling) device using the binary TSMF was fully investigated with the set-up. The obtained results indicate that boiling of the organic mixture (before the magnetic fluid itself reaching boiling point) effectively enhances the heat transfer as well as boosting the flow to circulate in the closed loop by itself. A long-distance heat transport of 5 m is experimentally confirmed, transferring the thermal energy of 35.8 W, even when the device (circulation loop) is horizontally placed. The highlighted results reveal that the proposed cooling device is innovative in a sense of transporting substantial amount of thermal energy (heat) as well as a long distance heat transport. The development of the magnetically-driven heat transport device has a great potential to be replaced for the conventional heat pipe in application of thermal engineering.

Interactive Environments: Opportunities for Social Innovation and Public Health Initiatives

Directory of Open Access Journals (Sweden)

Predrag K. Nikolic

2016-05-01

Full Text Available How to keep people in a “good health”, longer and healthier life is more than just a phrase listed in a sustainable strategies it became crucial issue for any future social innovation initiative and community needs. New technologies and its application in everyday living surrounding are affecting a way we are interacting between each other and with services around us. As a result, we are facing huge psychological and cultural shift in human behavior and raising of new social practices. We are in need of using new approaches and models in order to provoke human behavior change which is more than ever depending on content and context users can reach in interactive environments they are approaching through their devices or in a physical space. New powerful playground for social innovations is born.

Innovation environments and innovation capacity in the public sector

DEFF Research Database (Denmark)

Lewis, Jenny; Ricard, Lykke Margot; Klijn, Erik-Hans

Social innovation in the public sector has become an important focus for governments around the world over the last decade, as they try to solve intractable policy problems. The pressure on governments to do more with less in response to shrinking budgets and expanding community expectations...... and obligations has increased attention on how the public sector manages change and innovation. This heightened focus has created a need to understand the social innovation capacity of public sector environments. Work package 1of the LIPSE project on social innovation, examined this for four municipalities...

Hospital innovation portfolios: Key determinants of size and innovativeness

DEFF Research Database (Denmark)

Schultz, Carsten; Zippel-Schultz, Bettina; Salomo, Søren

2012-01-01

and reward systems) organizational mechanisms. Methodology: To develop hypotheses, we integrated the innovation management literature into the hospital context. Detailed information about the innovation portfolio of 87 German hospitals was generated and combined with multirespondent survey data using ratings....... Reward systems did not have direct effects on the composition of innovation portfolios. However, they adjusted bottom-up employee and top-down strategic initiatives to match with the existing organization, thereby decreasing the degree of innovativeness and enforcing exploitation. Practice Implications......: Hospitals should intertwine employee encouragement, analytical approaches, and formal reward systems depending on organizational goals....

Triggering system innovation in agricultural innovation systems

NARCIS (Netherlands)

Turner, James A.; Williams, Tracy; Nicholas, Graeme; Foote, Jeff; Rijswijk, Kelly; Barnard, Tim; Beechener, Sam; Horita, Akiko

2017-01-01

This article describes a process for stimulating engagement among change agents to develop a shared understanding of systemic problems in the agricultural innovation system (AIS), challenge prevalent institutional logics and identify actions they might undertake to stimulate system innovation.

Innovation in Organizations

Directory of Open Access Journals (Sweden)

Vladimir-Codrin Ionescu

2015-05-01

Full Text Available Innovation is an integrating part of the re-vitalization plan of EU economy and it is one of the seven initiatives comprised in the 2020 Europe Strategy. The European Union supports through active policies the creative-innovative processes, as illustrated by the Cohesion Policy Program for 2007-2013 and by the ”Horizon 2020” Program for Research and Innovation. The present paper presents, from an organizational perspective, relevant aspects related to the question of innovation and innovation management, while pointing out the most important internal and external factors that favour the introduction of innovation into the sphere of processes that are run by organizations, as well as into the sphere of products and services provided by organizations. At the same time, the paper briefly presents the essential attributes of organizations which obtain competitive sustainable advantages through innovation.

Teams as innovative systems: multilevel motivational antecedents of innovation in R&D teams.

Science.gov (United States)

Chen, Gilad; Farh, Jiing-Lih; Campbell-Bush, Elizabeth M; Wu, Zhiming; Wu, Xin

2013-11-01

Integrating theories of proactive motivation, team innovation climate, and motivation in teams, we developed and tested a multilevel model of motivators of innovative performance in teams. Analyses of multisource data from 428 members of 95 research and development (R&D) teams across 33 Chinese firms indicated that team-level support for innovation climate captured motivational mechanisms that mediated between transformational leadership and team innovative performance, whereas members' motivational states (role-breadth self-efficacy and intrinsic motivation) mediated between proactive personality and individual innovative performance. Furthermore, individual motivational states and team support for innovation climate uniquely promoted individual innovative performance, and, in turn, individual innovative performance linked team support for innovation climate to team innovative performance. (c) 2013 APA, all rights reserved.

Responsive Innovation

DEFF Research Database (Denmark)

Pedersen, Carsten

Although the importance of stakeholder networks has been recognized in recent years, a non-teleological model that incorporates their collective sensing into innovation processes has so far not been developed. Hence, this paper argues that traditional linear and sequential innovation models...... are insufficient in hypercompetitive environments. Instead, it is proposed that companies should ground their innovation processes in the collective sensing of frontline-employees and customers that operate around the organizational periphery. This frames the concept of responsive innovation, where key...... stakeholders engaged in the organization’s ongoing business activities collectively identify issues that central managers subsequently can resolve....

Approaching Service Innovation Patterns

OpenAIRE

Andrea NAGY

2013-01-01

The present paper aims at analyzing the types of innovation in the field of services. First, the concept of innovation is defined and second, field literature is reviewed from the perspective of service innovation. The main types of innovation are identified based on several attempts at defining innovation, the most notable being Schumpeter’s. Thus, it is possible to approach concepts such as product and process innovation, incremental and radical innovation. Another aim has been to regard se...

ARAPUCA a new device for liquid argon scintillation light detection

International Nuclear Information System (INIS)

Machado, A.A.; Segreto, E.

2016-01-01

We present a totally innovative device for the detection of liquid argon scintillation light, that has been named ARAPUCA (Argon R and D Advanced Program at UniCAmp). It is composed of a passive light collector and of active devices. The latters are standard SiPMs that operate at liquid argon temperature, while the passive collector is based on a new technology, never explored in this field before. It is a photon trap, that allows to collect light with extremely high efficiency. The total detection efficiency of the device can be tuned by modifying the ratio between the area of the active devices (SiPM) and the area of the optical window. For example, it will allow to reach a detection efficiency at the level of 1% on a surface of 50 × 50 cm 2 with an active coverage of 2 × 2 cm 2 (two/three large area SiPM). It is also a cheap device, since the major part of its cost is represented by the active devices. For these reason this appears to be the ideal device for scintillation light detection in large Time Projection Chambers. With appropriate modifications it can be used also in next generation Dark Matter detectors

Balanced Innovation Management

National Research Council Canada - National Science Library

King, David R

2007-01-01

The Department of Defense has demonstrated success in managing innovation. The military's approach to innovation management extends beyond traditional distinctions between internal and external innovation modes...

Innovation and Cooperation in the Basque Country’s Regional Innovation System

Directory of Open Access Journals (Sweden)

Beatriz Otero

2015-01-01

Full Text Available This study analyses the relation between innovation in industrial SMEs and cooperation with key players in the field of innovation in the context of an innovation system set up in the Basque Country. The empirical information used in the study is from samples of microdata taken from the Company Innovation Survey 2008 regarding 650 industrial SMEs in the Basque Country, and from 12 interviews conducted with important operators in the Regional Innovation System. The study demonstrates a positive relation between government policies on technology, the innovation carried out by companies, cooperation between the different participants and the subsidies that they receive

Measuring Manufacturing Innovativeness

DEFF Research Database (Denmark)

Blichfeldt, Henrik; Knudsen, Mette Præst

2017-01-01

Globalization and customization increases the pressure on manufacturing companies, and the ability to provide innovativeness is a potential source of competitive advantage. This paper positions the manufacturing entity in the innovation process, and investigates the relation between innovation vers...... technology and organizational concepts. Based on Danish survey data from the European Manufacturing Survey (EMS-2015) this paper finds that there is a relation between innovative companies, and their level of technology and use of organizational concepts. Technology and organizational concepts act...... as manufacturing levers to support the manufacturing and production system to provide innovativeness. The managerial implication lies in building manufacturing capabilities to support the innovative process, by standardization, optimization and creating stability in combination with automation and advanced...

Frugal innovation process

DEFF Research Database (Denmark)

Hossain, Mokter; Levänen, Jarkko; Lindeman, Sara

2017-01-01

and another developed by an individual from the Gujarat, India. Using effectuation theory we find that there are some distinct differences between two categories regarding finance, access to science and technology, the motivation of innovators, options they have, actions they take, etc....... processes. Second, we show how individuals have very different understandings of frugal innovations as well as capacities and resources needed for the development of frugal innovations. Two prominent frugal innovation cases are used in this study. One innovation was developed by individuals from the USA...

Innovators.

Science.gov (United States)

NEA Today, 2001

2001-01-01

Describes various innovations that have been developed to enhance education. These innovations include: helping educators help at-risk students succeed; promoting high school journalism; ensuring quality online learning experiences; developing a student performing group that uses theater to address social issues; and having students design their…

Medical Device Regulation: A Comparison of the United States and the European Union.

Science.gov (United States)

Maak, Travis G; Wylie, James D

2016-08-01

Medical device regulation is a controversial topic in both the United States and the European Union. Many physicians and innovators in the United States cite a restrictive US FDA regulatory process as the reason for earlier and more rapid clinical advances in Europe. The FDA approval process mandates that a device be proved efficacious compared with a control or be substantially equivalent to a predicate device, whereas the European Union approval process mandates that the device perform its intended function. Stringent, peer-reviewed safety data have not been reported. However, after recent high-profile device failures, political pressure in both the United States and the European Union has favored more restrictive approval processes. Substantial reforms of the European Union process within the next 5 to 10 years will result in a more stringent approach to device regulation, similar to that of the FDA. Changes in the FDA regulatory process have been suggested but are not imminent.

Balancing Absorptive Capacity and Inbound Open Innovation for Sustained Innovative Performance

DEFF Research Database (Denmark)

Bongsun, Kim; Kim, Eonsoo; Foss, Nicolai Juul

2016-01-01

How can a firm develop new ideas and turn them into profitable innovations on a sustained basis? We address this fundamental issue in a novel way by developing an integrative framework of absorptive capacity (AC) and inbound open innovation that is rooted in the attention-based view of the firm. We...... specifically address why a balance between open and closed innovation is important from the perspective of absorptive capacity, and show how it may be brought about. Pursuing either open or closed inbound innovation alone may result in an imbalance between potential AC and realized AC as well as inward......-looking AC and outward-looking AC, which will hinder innovative performance.We argue that practicing open and closed inbound innovation repeatedly and alternately by switching organizational attentions, and thus developing the associated AC, can facilitate balancing absorptive capacity and lead to innovative...

Modelling Technical and Economic Parameters in Selection of Manufacturing Devices

Directory of Open Access Journals (Sweden)

Naqib Daneshjo

2017-11-01

Full Text Available Sustainable science and technology development is also conditioned by continuous development of means of production which have a key role in structure of each production system. Mechanical nature of the means of production is complemented by controlling and electronic devices in context of intelligent industry. A selection of production machines for a technological process or technological project has so far been practically resolved, often only intuitively. With regard to increasing intelligence, the number of variable parameters that have to be considered when choosing a production device is also increasing. It is necessary to use computing techniques and decision making methods according to heuristic methods and more precise methodological procedures during the selection. The authors present an innovative model for optimization of technical and economic parameters in the selection of manufacturing devices for industry 4.0.

Producing Innovations : Determinants of Innovativity and Efficiency

NARCIS (Netherlands)

Bos, J.W.B.; van Lamoen, R.C.R.; Sanders, M.W.J.L.

2016-01-01

In this chapter, we investigate the knowledge production function, using the Community Innovation Survey, an unbalanced firm-level panel data set collected in the Netherlands between 1994 and 2004. This database allows us to span the entire innovation process from initial resources committed (R&D

Market entry and exit by biotech and device companies funded by venture capital.

Science.gov (United States)

Burns, Lawton R; Housman, Michael G; Robinson, Charles A

2009-01-01

Start-up companies in the biotechnology and medical device sectors are important sources of health care innovation. This paper describes the role of venture capital in supporting these companies and charts the growth in venture capital financial support. The paper then uses longitudinal data to describe market entry and exit by these companies. Similar factors are associated with entry and exit in the two sectors. Entries and exits in one sector also appear to influence entry in the other. These findings have important implications for developing innovative technologies and ensuring competitive markets in the life sciences.

Transparent and flexible write-once-read-many (WORM) memory device based on egg albumen

International Nuclear Information System (INIS)

Qu, Bo; Lin, Qianru; Wan, Tao; Du, Haiwei; Chen, Nan; Lin, Xi; Chu, Dewei

2017-01-01

Egg albumen, as an important protein resource in nature, is an interesting dielectric material exhibiting many fascinating properties for the development of environmentally friendly electronic devices. Taking advantage of their extraordinary transparency and flexibility, this paper presents an innovative preparation approach for albumen thin film based write-once-read-many-times (WORM) memory devices in a simple, cost-effective manner. The fabricated device shows superior data retention properties including non-volatile character (over 10 5 s) and promising great read durability (10 6 times). Furthermore, our results suggested that the electric-field-induced trap-controlled space charge limited current (SCLC) conduction is responsible for the observed resistance switching effect. The present study may likely reveal another pathway towards complete see-through electrical devices. (paper)

Transparent and flexible write-once-read-many (WORM) memory device based on egg albumen

Science.gov (United States)

Qu, Bo; Lin, Qianru; Wan, Tao; Du, Haiwei; Chen, Nan; Lin, Xi; Chu, Dewei

2017-08-01

Egg albumen, as an important protein resource in nature, is an interesting dielectric material exhibiting many fascinating properties for the development of environmentally friendly electronic devices. Taking advantage of their extraordinary transparency and flexibility, this paper presents an innovative preparation approach for albumen thin film based write-once-read-many-times (WORM) memory devices in a simple, cost-effective manner. The fabricated device shows superior data retention properties including non-volatile character (over 105 s) and promising great read durability (106 times). Furthermore, our results suggested that the electric-field-induced trap-controlled space charge limited current (SCLC) conduction is responsible for the observed resistance switching effect. The present study may likely reveal another pathway towards complete see-through electrical devices.

Market Orientation, Innovativeness, Product Innovation, and Performance in Small Firms

NARCIS (Netherlands)

Verhees, F.J.H.M.; Meulenberg, M.T.G.

2004-01-01

Most research on market orientation, innovation and performance is related to big enterprises and small and medium-sized enterprises (SMEs). In this study a model is developed to investigate the combined effect of market orientation and innovativeness on product innovation and company performance,

Organising for innovation in regional innovation systems

DEFF Research Database (Denmark)

Brink, Tove

2017-01-01

The research in this paper reveals how organising the innovation ecosystem can enable the achievement of the aim for innovation and competiveness. The research was conducted from June 2014 to May 2015 using a qualitative deductive approach among operation & maintenance (O&M) actors in offshore wind...

Time to Innovate: Reflections and Recommendations on Time Management for Innovation Managers

Directory of Open Access Journals (Sweden)

Robert J. Crawhall

2013-09-01

Full Text Available Effective time management is a critical success factor for most projects; however, it is particularly challenging for projects involving substantial innovation. For most projects, time (i.e., the schedule becomes a management "red flag" that signals when something goes wrong or gets out of control. The challenge for projects involving significant innovation is that one or more critical activities may be of an unknown duration or involve factors outside the normal design process and require "red flagging" from the outset. Managers of innovation projects have to distinguish between those activities or work packets that are a part of “business as usual” and those that involve innovation. They must identify and quantify the schedule risks and develop strategies to mitigate them. For example, one strategy to manage time-related risk is to decouple the innovation value as perceived by the customer (innovation output from the technology innovation that is needed to deliver the product value in a cost-effective manner (innovation input. This strategy should take into account the likely consequences of longer-than-anticipated innovation time. Two common risks associated with poor time management for innovation are running out of financial runway to reach sustainable revenue and missing a critical market window. In this article, the author reflects on almost 30 years of experience in the Canadian innovation system across several industry sectors and provides some practical recommendations on time management for innovation managers.

THE CONTRIBUTION OF INNOVATION SYSTEMS AND ORGANIZATIONAL CULTURE FOR INNOVATION GENERATION

Directory of Open Access Journals (Sweden)

Elaine da Silva

2018-04-01

Full Text Available Introduction: Emphasizes the role of innovation in the Information and Knowledge Society as a favorable element of developing regional, national and global levels. Objective: The aim is reflect about the coming of innovation in the context of production systems and their respective role for the development of society. Methodology: The research sets up a qualitative approach to literature and exploratory nature. Results: As from selected literature review, presents conceptual aspects of innovation in the context of production systems and analyzes its contribution to the national innovation system and the role of organizational culture focused on innovation. Conclusions: Think about innovation from the systemic approach, based on the interaction of the different relevant agents to influence and contribute to the generation of innovation is fundamental in the current conjuncture, characterized by the agility of the transformations in social, economic, political and technological contexts.

Customer Innovation Process Leadership

DEFF Research Database (Denmark)

Lindgren, Peter; Jørgensen, Jacob Høj; Goduscheit, René Chester

2007-01-01

Innovation leadership has traditionally been focused on leading the companies' product development fast, cost effectively and with an optimal performance driven by technological inventions or by customers´ needs. To improve the efficiency of the product development process focus has been on diffe......Innovation leadership has traditionally been focused on leading the companies' product development fast, cost effectively and with an optimal performance driven by technological inventions or by customers´ needs. To improve the efficiency of the product development process focus has been...... on different types of organisational setup to the product development model and process. The globalization and enhanced competitive markets are however changing the innovation game and the challenge to innovation leadership Excellent product development innovation and leadership seems not any longer to enough...... another outlook to future innovation leadership - Customer Innovation Process Leadership - CIP-leadership. CIP-leadership moves the company's innovation process closer to the customer innovation process and discusses how companies can be involved and innovate in customers' future needs and lead...

National Innovation System and Disruptive Innovations in Synthetic Rubber and Tire Technology

Directory of Open Access Journals (Sweden)

Ray R. Gehani

2008-01-01

Full Text Available The current models of National Innovation Systems (NIS are based on interactions and learning across three institutions: government, university and industry. This empirical study of the evolution of innovations in rubber and tire technologies such as the collaborative innovative suppliers (of raw materials and human capital and disruptive rival innovators to the traditional tri-helical model of National Innovation System. This was empirically examined for the evolution of rubber and tire technology and the rise and decline of its innovative region: the Rubber Capital of the World in Akron, Ohio.

Service Innovation and Management Innovation: The Role of Service Tangibility

NARCIS (Netherlands)

Alexiev, A.S.; Janssen, Matthijs; den Hertog, P.

2015-01-01

Although we have some knowledge about how different types of innovation can be combined together to improve firm performance, there is little research about the relationships that innovation types may have among them. In this paper, we examine how service innovation is related to organizational

Inside Real Innovation

Science.gov (United States)

2011-11-01

investors, innovators and people in corporations , universities and government. This breakthrough book gives a ground-floor view of the innovation...investors, innovators and people in corporations , universities and government. INSIDE REAL INNOVATION - How the Right Approach Can Move Ideas from R...shop phenomenon, pioneered by Starbucks and others, was based not on selling coffee but on giving the patrons a congenial setting.) At any rate

Innovation at DARPA

Science.gov (United States)

2016-07-01

Distribution Statement A: Approved for Public Release, Distribution Unlimited Innovation at DARPA July 2016 1 Distribution...Statement A: Approved for Public Release, Distribution Unlimited Innovation at DARPA A Long History of Innovation DARPA, the Defense Advanced Research...guided work that has “changed the world"—a phrase frequently heard at DARPA to ensure a focus on transformative innovation as opposed to incremental

Global Innovation Systems—A conceptual framework for innovation dynamics in transnational contexts

NARCIS (Netherlands)

Binz, Christian; Truffer, Bernhard|info:eu-repo/dai/nl/6603148005

2017-01-01

This paper proposes a framework for the analysis of technological innovation processes in transnational contexts. By drawing on existing innovation system concepts and recent elaborations on the globalization of innovation, we develop a multi-scalar conceptualization of innovation systems. Two key

Inventing our future: training the next generation of surgeon innovators.

Science.gov (United States)

Krummel, Thomas M; Gertner, Michael; Makower, Josh; Milroy, Craig; Gurtner, Geoff; Woo, Russell; Riskin, Daniel J; Binyamin, Gary; Connor, Jessica Anne; Mery, Carlos M; Shafi, Bilal M; Yock, Paul G

2006-11-01

Current surgical care and technology has evolved over the centuries from the interplay between creative surgeons and new technologies. As both fields become more specialized, that interplay is threatened. A 2-year educational fellowship is described which teaches both the process and the discipline of medical/surgical device innovation. Multi-disciplinary teams (surgeons, engineers, business grads) are assembled to educate a generation of translators, who can bridge the gap between scientific and technologic advances and the needs of the physician and the patient.

International Innovation Cooperation with a View to Innovative Development

Directory of Open Access Journals (Sweden)

Kramarenko Ruslan M.

2016-02-01

Full Text Available Currently the process of globalization in the field of scientific, technical and industrial activity continues to grow. Countries conclude bilateral and multilateral agreements to facilitate cooperation in scientific research and co-financing of capital-intensive innovation projects. Combining competitive advantages of companies is motivated by the government’s policy with respect to attracting foreign direct investments and entering new markets. Despite some discomfort of countries of the world caused by the outflow of knowledge abroad and disturbance of the equilibrium of the trade balance, most of the countries of the OECD have scientific and economic benefits from these transactions. The processes associated with innovations are constantly in the focus of attention of local and foreign experts and are reflected in their works. The aim of the article is to analyze the impact of international integration interaction of countries of the world on innovative development. The forms of internationalization of innovation activities have been analyzed. The main vector of the modern global competition based on scientific and technological achievements and innovations has been determined. The main directions of the internationalization of innovation activities have been revealed and justified

Framing 100-year overflowing and overtopping marine submersion hazard resulting from the propagation of 100-year joint hydrodynamic conditions

Science.gov (United States)

Nicolae Lerma, A.; Bulteau, T.; Elineau, S.; Paris, F.; Pedreros, R.

2016-12-01

frame the true 100-year response variable. The selected scenarios are propagated to the shore through a high resolution flood modelling coupling overflowing and overtopping processes. Results in terms of inundated areas and inland water volumes are finally compared for the two methods, giving upper and lower bounds for the true response variables.

Innovation patterns in sustainable tourism

DEFF Research Database (Denmark)

Hjalager, Anne Mette

1997-01-01

to the environment. The following types of innovation can be distinguished: product innovations, classical process innovations, process innovations in information handling, management innovations and institutional innovations. The article concludes that innovations are predominantly launched as part of defensive...

Responsible innovation

CERN Document Server

De Woot, Philippe

2015-01-01

Economic development is rooted in disruption, not in equilibrium. And a powerful engine of economic development is innovation; but is this innovation always for the common good? The dark side of the extraordinary dynamism of innovation lies precisely in its destructive power. If simply left to market forces, it could lead to social chaos and great human suffering. To face the challenges of our time, we must create the proper climate and culture to develop strong entrepreneurial drive. But, more than ever, we must give this entrepreneurial drive its ethical and societal dimensions. Responsible innovation means a more voluntary orientation towards the great problems of the 21st century, e.g. depletion of the planet's resources, rising inequality, and new scientific developments potentially threatening freedom, democracy and human integrity. We need to transform our ceaseless creativity into real progress for humankind. In this respect, the rapid development of social innovation opens the door for new methods an...

Everyday-Oriented Innovation

DEFF Research Database (Denmark)

Munnecke, Max

The exploration of radical innovation has long been regarded as fundamental to business growth. In the 21st century, modern organisations increasingly seek to combine business innovation with the broader goal to confront social and environmental challenges. Vision projects are related phenomena...... which explore and map radical innovation opportunities within everyday activities. The aim of a vision project is to produce an innovation map that can empower an organisation to navigate between potential innovation opportunities and pro‐actively confront modern challenges for the benefit of people......, business, and society. The study addresses the concern that vision projects do not produce sufficient navigational innovation maps, and seeks to improve their quality by modelling a new methodological framework. The study was conducted as a series of four research cycles which modelled and experimented...

Gamma-ray imaging system. Innovative technology summary report

International Nuclear Information System (INIS)

1998-11-01

The RadScan 600 gamma-ray imaging system is designed to survey large surface areas for radiological contamination with accuracy and efficiency. The resulting survey data are clear, concise, and precise in describing how much contamination is present at exact locations. Data can be permanently stored electronically and on video tape, making storage and retrieval economical and efficient. This technology can perform accurate measurements in high radiation contamination areas while minimizing worker exposure. The RadScan 600 system is a safe and effective alternative to hand-held radiation detection devices. Performance data of the demonstrated survey area of the RadScan 600 system versus the baseline, which is the hand-held radiation detection devices (RO-2 and RO-7) for a given survey, production rate is 72% of the baseline. It should be noted that the innovative technology provides 100% coverage at a unit cost of $8.64/m 2 versus a static measurement of a unit cost of $1.61/m 2 for the baseline

WaveSAX device: design optimization through scale modelling and a PTO strategical control system

Science.gov (United States)

Peviani, Maximo; Danelli, Andrea; Dadone, Gianluca; Dalmasso, Alberto

2017-04-01

WaveSAX is an innovative OWC (Oscillating Water Column) device for the generation of electricity from wave power, conceived to be installed in coastal marine structures, such as ports and harbours. The device - especially designed for the typical wave climate of Mediterranean Sea - is characterized by two important aspects: flexibility to fit in different structural configurations and replication in a large number of units. A model of the WaveSAX device on a scale 1:5 has been built and tested in the ocean tank at Ecole Centrale de Nantes (France). The study aimed to analyse the behaviour of the device, including two Wells turbine configurations (with three and four blades), with regular and irregular wave conditions in the ocean wave tank. The model and the wave basin were equipped with a series of sensors which allowed to measure the following parameters during the tests: pressure in different points inside the device, the free water surface displacement inside and outside the device, the rotational velocity and the torque at the top of the axis. The tests had the objective to optimize the device design, especially as far as the characteristics of the rotor of the turbine is concern. Although the performance of the WaveSAX has been satisfactory for regular wave conditions, the behaviour of the Wells turbines for irregular wave climate has shown limitations in terms of maintaining the capacity to transform hydraulics energy into mechanical power. To optimize the efficiency of the turbine, an electronical system has been built on the basis of the ocean tank tests. It allows to continuously monitor and command the rotational speed and the torque of the rotor connected with the turbine, and to control in real time the electrical flow of a motor-generator, either absorbing energy as a generator, or providing power to the turbine working as an engine. Two strategies - based on the velocity and the torque control - have been investigate in the electronic test bench

Determinants, obstacles, sources and cooperation to innovation in Portuguese firms, using community innovation survey

Science.gov (United States)

Correia, Aldina; Braga, Alexandra; Braga, Vitor

2017-06-01

Innovation is a topic of interest for the management researchers, confirmed by the creation of a Community Innovation Survey, which is an harmonised tool designed to provide information about Innovation in European Union enterprises. In this study, we use factorial analysis to identify the determinants and obstacles to innovation in Portuguese firms. The sources of innovation and cooperation to innovation are also analysed, using crossed information. For the determinants of innovation six factors were identified: Production costs and impacts to health and environment, Process and product innovation, Organizational innovation, Institutional sources of information, Others sources of information and Market sources of information. Obstacles to innovation were clustered into three groups: Knowledge and market factors, Cost factors and Reasons not to innovate. The main sources of innovation identified, in this study, are Suppliers and Clients, located in Portugal and in Europe. Cooperation partners are also majority Clients and Suppliers, in addition to other enterprises in the same group.

Teaching and Learning with Mobile Technology: A Qualitative Explorative Study about the Introduction of Tablet Devices in Secondary Education

Science.gov (United States)

Montrieux, Hannelore; Vanderlinde, Ruben; Schellens, Tammy; De Marez, Lieven

2015-01-01

This paper investigates teachers’ and students’ perceptions concerning the impact of using tablet devices for teaching and learning purposes. An explorative focus group study was conducted with teachers (n = 18) and students (n = 39) in a secondary school that has implemented tablet devices since 2012. The general finding of this study shows that the use of tablet devices in the classroom setting has an impact on both teaching and learning practices. The results suggest that teachers can be divided into two categories: the innovative teachers and the instrumental teachers. Innovative teachers attempt to shift from a teacher-centered to a learning-centered approach. They have changed their teaching style by transforming lessons in accordance with the advantages tablet computers can offer. Instrumental teachers seem to use the device as a ‘book behind glass’. The distinction between the two groups has consequences for both the way courses are given and how students experience them. In general, the introduction of tablet devices entails a shift in the way students learn, as the devices provide interactive, media-rich, and exciting new environments. The results of this study indicate that policy makers should consider introducing technical and pedagogical support in order to facilitate both teachers’ and students’ understanding of the full potential of this kind of technology in education. PMID:26641454

Teaching and Learning with Mobile Technology: A Qualitative Explorative Study about the Introduction of Tablet Devices in Secondary Education.

Directory of Open Access Journals (Sweden)

Hannelore Montrieux

Full Text Available This paper investigates teachers' and students' perceptions concerning the impact of using tablet devices for teaching and learning purposes. An explorative focus group study was conducted with teachers (n = 18 and students (n = 39 in a secondary school that has implemented tablet devices since 2012. The general finding of this study shows that the use of tablet devices in the classroom setting has an impact on both teaching and learning practices. The results suggest that teachers can be divided into two categories: the innovative teachers and the instrumental teachers. Innovative teachers attempt to shift from a teacher-centered to a learning-centered approach. They have changed their teaching style by transforming lessons in accordance with the advantages tablet computers can offer. Instrumental teachers seem to use the device as a 'book behind glass'. The distinction between the two groups has consequences for both the way courses are given and how students experience them. In general, the introduction of tablet devices entails a shift in the way students learn, as the devices provide interactive, media-rich, and exciting new environments. The results of this study indicate that policy makers should consider introducing technical and pedagogical support in order to facilitate both teachers' and students' understanding of the full potential of this kind of technology in education.

Something new every day: defining innovation and innovativeness in drug therapy.

Science.gov (United States)

Aronson, Jeffrey K

2008-01-01

The word "innovation" comes from the Latin noun innovatio, derived from the verb innovare, to introduce [something] new. It can refer either to the act of introducing something new or to the thing itself that is introduced. In terms of commerce, it is defined in the Oxford English Dictionary as "the action of introducing a new product into the market; a product newly brought on to the market," a definition that illustrates both aspects of the word's meaning. "Innovativeness" is the property of being an innovation. Here I identify several different types of innovativeness in drug therapy, including structural, pharmacological or pharmacodynamic, pharmaceutical, and pharmacokinetic innovativeness, and I stress the over-riding importance of clinical innovativeness, which should result in a better benefit to harm balance at an affordable cost.

Public sector innovation

DEFF Research Database (Denmark)

Wegener, Charlotte

2012-01-01

This paper explores the value dimension of public innovation in the light of practitioners’ values and asks why there seems to be a clash between innovation imperatives and workplace practices in the public sector. The paper contributes to the research on public innovation from a practice...... perspective by providing evidence from an ethnographic field study on innovation in social and health care studies in Denmark. These studies are part of the vocational education and training (VET) system, which combines coursework at a college and internship in the elder care sector. The study is thus cross...... initiate innovations grounded in their values. The main point put forward is that the value dimension of public innovation must be understood not only in terms of value creation (economic or non-economic), which frontline practitioners are required to contribute to, but also as value-based practices...

Effects of R&D Cooperation to Innovation Performance in Open Innovation Environment

Directory of Open Access Journals (Sweden)

Gao Liang

2014-05-01

Full Text Available Dynamic nonlinear characteristics of internal and external environment in modern organization shows up increasingly, which make innovative research breakthrough organizational boundaries and present a pattern of open mode, the traditional mode of innovation is facing huge challenges like increasing innovation cycle, huge R&D input and inefficient knowledge transfer. And cooperation with external organizations to implement R&D is definitely a possibility to solve the open innovation environment challenge. Since organizations often have multiple dimensions of cooperation with different types of organization for research and development for the influence of organizational innovation performance or for exploring cooperation at the same time in different areas, and in different types of institutions. This paper studied the innovation performance of relevant government agencies except such innovation organization as enterprises, universities, and research institutions for the first time. This paper tracked on a survey of China's national engineering technology research center in related situation from 2002 to 2011 and collected related data to research and development cooperation and innovation performance for empirical research. Study found that universities have advantages in richness, in knowledge itself and knowledge accessible extent, cooperation with university in R&D is the best choice to promote the innovation performance of the organization. While cooperating with domestic universities and domestic enterprises to carry out research and development has bad effect in organizational innovation performance; while cooperation with domestic institutions and foreign institutions in the research and development plays a positive role in promoting innovation.

Technology for Innovation in Radiation Oncology.

Science.gov (United States)

Chetty, Indrin J; Martel, Mary K; Jaffray, David A; Benedict, Stanley H; Hahn, Stephen M; Berbeco, Ross; Deye, James; Jeraj, Robert; Kavanagh, Brian; Krishnan, Sunil; Lee, Nancy; Low, Daniel A; Mankoff, David; Marks, Lawrence B; Ollendorf, Daniel; Paganetti, Harald; Ross, Brian; Siochi, Ramon Alfredo C; Timmerman, Robert D; Wong, John W

2015-11-01

Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled "Technology for Innovation in Radiation Oncology," which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic. Copyright © 2015 Elsevier Inc. All rights reserved.

Innovating Healthcare Processes for Speed and Effectiveness

Directory of Open Access Journals (Sweden)

Maryline Margueritte

2013-12-01

Full Text Available For several years, health networks have developed devices enabling coordinated care of patients in France, regarding both medical plans as well as medico-psycho-social and human care. Some have developed computerized health records for sharing useful information for the coordination and continuity of care. Since the 2009 hospital reform, cooperative operating modes between health system professionals and users are being installed. The implementation of a health information system permits, on one hand, to ensure the transversality of the business process with the patient and, on the other hand, to measure the results of the medical and economic evolution of a complex system of information. The possibilities offered by new technologies of information and communication enable the development of applications supporting increased "on line" participation for citizens. The "ambulatory approach" exports healthcare outside hospital walls. This is an innovative medicine allowing the patient to stay at his home. In France, this re-engineering is based on four areas: a medical record, a collective ownership by the medical and paramedical professions, empowerment of patients and networking in the health sector.Keywords: Health; Networks; Information System; Innovation; Medicine; Patients; Science.

Room temperature electrically tunable rectification magnetoresistance in Ge-based Schottky devices.

Science.gov (United States)

Huang, Qi-Kun; Yan, Yi; Zhang, Kun; Li, Huan-Huan; Kang, Shishou; Tian, Yu-Feng

2016-11-23

Electrical control of magnetotransport properties is crucial for device applications in the field of spintronics. In this work, as an extension of our previous observation of rectification magnetoresistance, an innovative technique for electrical control of rectification magnetoresistance has been developed by applying direct current and alternating current simultaneously to the Ge-based Schottky devices, where the rectification magnetoresistance could be remarkably tuned in a wide range. Moreover, the interface and bulk contribution to the magnetotransport properties has been effectively separated based on the rectification magnetoresistance effect. The state-of-the-art electrical manipulation technique could be adapt to other similar heterojunctions, where fascinating rectification magnetoresistance is worthy of expectation.

Organizing Systemic Innovation

NARCIS (Netherlands)

F.P.H. Jaspers (Ferdinand)

2009-01-01

textabstractSystemic innovation refers to product development activities that involve the change of multiple interdependent components. Unlike autonomous innovation, which refers to components that change independently, systemic innovation is for many firms the norm rather than the exception. This

Innovation without Design?

DEFF Research Database (Denmark)

Pinheiro-Croisel, Rebecca; Hernes, Tor

2012-01-01

This paper explores innovation and social behaviourist theory in relation to sustainable urban projects in the highly institutionalized public sector (towns). Using empirical data from France, we examine the dynamics of a design process in which unexpected practices generated innovative urban...... into a movement of collective action, which presupposed the acquisition of a new identity. Ultimately, our objective is to combine social behaviourist theory and innovation theory and to facilitate innovative design in urban projects....

Innovative capability and financing constraints for innovation: More money, more innovation?

OpenAIRE

Hottenrott, Hanna; Peters, Bettina

2012-01-01

This study presents a novel empirical approach to identify financing constraints for innovation based on the idea of an ideal test as suggested by Hall (2008). Firms were offered a hypothetical payment and were asked to choose between alternatives of use. If they choose additional innovation projects they must have had some unexploited investment opportunities that were not profitable using more costly external finance. That is, these firms have been financially constrained. We attribute cons...

Experimental progress and innovation on the HL-2A tokamak

International Nuclear Information System (INIS)

Ding Xuantong

2010-01-01

The HL-2A Tokamak is the first large controlled fusion experiment device with divertor in China. In this paper, the main experimental results on this device will be presented. Since its establishment, the operation conditions have been improved greatly. First, the divertor configuration was realized, the electron temperature was increased to 5.5 keV by electron cyclotron heating, and then the high confinement edge localized mode was achieved. With the development of high power auxiliary heating and advanced plasma diagnostic systems,innovative contributions have been made in certain plasma physics areas. The 3-dimension structure of the zonal flow has been identified, which is very important in the transport of fusion plasma. Supersonic molecular beam injection has also been developed and successfully used for plasma transport. The tearing mode has been suppressed by electron cyclotron resonance heating with low frequency modulation, and the confinement has been improved. The new phenomena of the internal kink mode and Alfen mode excited by energetic electrons have been observed. Future plans and new experiments on the device will also be briefly presented. (authors)

Innovation and Entrepreneurship | NREL

Science.gov (United States)

Innovation and Entrepreneurship Innovation and Entrepreneurship Connect Contact us for more Innovation and Entrepreneurship Center helps connect emerging clean energy businesses with the financial , and pilot opportunities. Read more Events Innovation and entrepreneurship events like the upcoming

The Wave Dragon

DEFF Research Database (Denmark)

Sørensen, H. C.; Hansen, R.; Friis-Madsen, E.

2000-01-01

The Wave Dragon is an offshore wave energy converter of the overtopping type, utilizing a patented wave reflector design to focus the waves towards a ramp, and the overtopping is used for electricity production through a set of Kaplan/propeller hydro turbines. During the last 2 years, excessive...... design an testing has been performed on a scale 1:50 model of the Wave Dragon, and on a scale 1:3:5 model turbine. Thus survivability, overtopping, hydraulic response, turbine performance and feasibility have been verified....

Financing Innovation

OpenAIRE

William R. Kerr; Ramana Nanda

2014-01-01

We review the recent literature on the financing of innovation, inclusive of large companies and new startups. This research strand has been very active over the past five years, generating important new findings, questioning some long-held beliefs, and creating its own puzzles. Our review outlines the growing body of work that documents a role for debt financing related to innovation. We highlight the new literature on learning and experimentation across multi-stage innovation projects and h...

Technology Innovation

Science.gov (United States)

EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

Innovating for sustainability

DEFF Research Database (Denmark)

The theme of the articles is innovating for sustainability. Empirically the articles shows how enterprises makes environmental innovations related to their processes and products within the organic dairy industry, the fish processing industry and the car industry.......The theme of the articles is innovating for sustainability. Empirically the articles shows how enterprises makes environmental innovations related to their processes and products within the organic dairy industry, the fish processing industry and the car industry....

Use of rope guides in uranium mining and their innovations in techniques

International Nuclear Information System (INIS)

Hu Erlian.

1984-01-01

Thanks to some innovations and effective measures, the rope guides have been successfully used in multi-level operation in some uranium mines since the year of 1968. These innovations and measures are as follows: (1) by the use of the intermediate fixing grips of guide ropes, etc., to increase the rigidity of the guides and restrain swaying of the hoisting conveyance. (2) by the use of modified screw tensioning device to replace the weight tensioning one to cut down operation cost apparently. (3) By the use of mobile platform in the form of arc plate, or the shiftable guides as the cage stabilizer for intermediate levels to firm the cage horizontally and prevent it from vertical tilting owing to impulsive force from the motion of mine cars, etc. (Author)

Innovations in urban agriculture

NARCIS (Netherlands)

Schans, van der J.W.; Renting, Henk; Veenhuizen, Van René

2014-01-01

This issuehighlights innovations in urban agriculture. Innovation and the various forms of innovations are of particular importance because urban agriculture is adapted to specific urban challenges and opportunities. Innovation is taking place continuously, exploring the multiple fundions of urban

Combined Innovation Policy: Linking Scientific and Practical Knowledge in Innovation Systems

OpenAIRE

Isaksen, Arne; Nilsson, Magnus

2013-01-01

New research indicates that firms combining the science-based STI (Science, Technology, Innovation) and the experience-based DUI (Doing, Using, Interacting) modes of innovation are more efficient when it comes to improving innovation capacity and competitiveness. With regard to innovation policy, the STI mode calls for a supply driven policy, typically aimed to commercialise research results. The DUI mode suggests a demand driven policy approach, such as supporting the development of new prod...

Low-cost high-quality crystalline germanium based flexible devices

KAUST Repository

Nassar, Joanna M.

2014-06-16

High performance flexible electronics promise innovative future technology for various interactive applications for the pursuit of low-cost, light-weight, and multi-functional devices. Thus, here we show a complementary metal oxide semiconductor (CMOS) compatible fabrication of flexible metal-oxide-semiconductor capacitors (MOSCAPs) with high-κ/metal gate stack, using a physical vapor deposition (PVD) cost-effective technique to obtain a high-quality Ge channel. We report outstanding bending radius ~1.25 mm and semi-transparency of 30%.

Low-cost high-quality crystalline germanium based flexible devices

KAUST Repository

Nassar, Joanna M.; Hussain, Aftab M.; Rojas, Jhonathan Prieto; Hussain, Muhammad Mustafa

2014-01-01

High performance flexible electronics promise innovative future technology for various interactive applications for the pursuit of low-cost, light-weight, and multi-functional devices. Thus, here we show a complementary metal oxide semiconductor (CMOS) compatible fabrication of flexible metal-oxide-semiconductor capacitors (MOSCAPs) with high-κ/metal gate stack, using a physical vapor deposition (PVD) cost-effective technique to obtain a high-quality Ge channel. We report outstanding bending radius ~1.25 mm and semi-transparency of 30%.

Realizing innovative public waterworks: Aligning administrative capacities in collaborative innovation processes

NARCIS (Netherlands)

S. Grotenbreg (Sanne); M.W. van Buuren (Arwin)

2016-01-01

textabstractThe importance of government support for innovation is widely acknowledged, but the way governments support innovation is changing. We discern three trends: local innovation policies are gaining importance; governments increasingly choose a bottom-up, tailor-made approach to support

Adoption of Innovation

DEFF Research Database (Denmark)

This edited volume brings together academics from both innovation and marketing fields to explore the additional value for companies that can be generated with the innovations in marketing and the marketing of innovations. If ideas need to reach the marketplace, then marketing strategies, concept...

Innovate or Die.

NARCIS (Netherlands)

Jagersma, P.K.

2003-01-01

Concentrates on innovation as an under-exploited path to success in the business community, though reckons becoming innovative is not easy. Suggests innovative companies have a number of common characteristics, which are ten strategies to be implemented to create success, these are listed in full.