Designing collaborative policy innovation

DEFF Research Database (Denmark)

Agger, Annika; Sørensen, Eva

2014-01-01

Recent approaches to enhancing public innovation suffer from two shortcomings: They overemphasize competition as a driver of innovation and overlook the fact that public sector innovation involves policy innovation as well as service innovation. Drawing on governance research and innovation theory......, the chapter investigates the extent to which and how collaboration between politicians and relevant stakeholders can spur the formulation, implementation and diffusion of new innovative policies. A case study of a process of collaborative policy innovation in a Danish municipality shows that collaborative...... policy arenas do contribute to policy innovation but also that the degree to which they do so depends on the institutional design of these arenas....

MODELING AND DESIGN OF INNOVATIVE SMALL DIAMETER GRAVITY SEWERAGE SYSTEM

Directory of Open Access Journals (Sweden)

Tadeusz Nawrot

2017-05-01

Full Text Available The article presents modern methods of hydraulic design of an innovative small diameter gravity sewerage system. In this system, domestic wastewater is preliminary treated in septic tanks equipped with outlet filters, thus the effluent features are similar to those of clear water. Innovative non-return valves at the outlets eliminate introduction of air to the system and thus the flows can be treated as one-phase ones. Computer codes EPANET 2 and SWMM 5.0 were applied and compared. Two flow schemes typical for the sewerage system were implemented in EPANET 2, and the third - in a slightly modified SWMM 5.0. Simulation results were validated on empirical data obtained on a laboratory physical model, consisting of four tanks of minimum volumes 600 dm3 each, connecting PE pipelines of diameters 25 mm and 36 mm and relevant sanitary fittings. Water inflows, typical for domestic wastewater outflows from single homesteads, were provided by a pump. Water flows were measured using water meters with pulse outputs, and water levels in tanks by pressure transducers. Hydraulic characteristics of filters and non-return valves were provided. Simulation results showed good agreement with the empirical data. Ranges of values of design parameters, needed for successful application of both codes, were established and discussed.

Design Innovation Catalysts: Education and Impact

Directory of Open Access Journals (Sweden)

Cara Wrigley

Full Text Available Organizations globally look to design to help them innovate, differentiate, and compete in a changing economic climate. Consequently, design is increasingly being regarded as a dynamic and central tactical business resource. Considering this, the question is raised: how can the specific knowledge and skills of designers be better articulated, understood, implemented, and valued as core components of strategic innovation in businesses? In seeking to answer this question, this paper proposes a new frontier for the design profession, coined the “Design Innovation Catalyst” (DIC. This paper reflects on both extant literature and the teaching of seven DICs embedded in industry, conducting innovation projects run over a twelve to twenty-four month period. This paper reports on a unique set of six capabilities analyzed as being not only essential for the implementation of design-led innovation, but of great assistance in overcoming its associated challenges. This paper outlines the role of these new design professionals, and discusses the value these novel capabilities provide organizations through employing DICs. Furthermore, questions surrounding how designers will develop these new capabilities, and how the design-led innovation framework in application can contribute to the future of design will also be presented.

Business Model Innovation for Small Medium Enterprises

Directory of Open Access Journals (Sweden)

Wirania Swasty

2015-09-01

Resource Based View, Value Chain Analysis and Business Model Canvas. Finding suggests SMEs to have business model innovation derived from value proposition. SMEs should build their own brand awareness. Moreover, as garment and fashion industry, design can be a particularly important part of the Value Proposition. SMEs could communicate its value propositions and inform their service through its official websites and other social media. Since the intangible resources include brand and design, thus SMEs should build brand image and innovate year by year. SMEs must hire designers and launch a series of new products offers under the signature of their own brands. Ideation to strengthen strategies derives from value proposition building block as a starting point. Moreover, Business Model Canvas makes strategy more focused and measurable. Business model innovation is expected to increase overall performance of SMEs.

Open Innovation and Organization Design

Directory of Open Access Journals (Sweden)

Michael Tushman

2012-05-01

Full Text Available Abernathy's (1978 empirical work on the automotive industry investigated relationships among an organization’s boundary (all manufacturing plants, its organizational design (fluid vs. specific, and its ability to execute product and/or process innovations.  Abernathy's ideas of dominant designs and the locus of innovation have been central to scholars of innovation, R&D, and strategic management. Similarly, building on March and Simon's (1958 concept of organizations as decision making systems, Woodward (1965, Burns and Stalker (1966, and Lawrence and Lorsch (1967 examined relationships among organizational boundaries, organization structure, and innovation in a set of industries that varied by technology and environmental uncertainty. These and other early empirical works have led a diverse group of scholars to develop theories about firm boundaries, organization design, and the ability to innovate.

Design Principles of Open Innovation Concept – Universal Design Viewpoint

OpenAIRE

Mustaquim, Moyen; Nyström, Tobias

2013-01-01

The concept of open innovation is becoming an increasingly popular topic of interest and seems to promise a lot in organizational development. However, to date there are no certain design principles that can be followed by organizations on how to use open innovation successfully. In this paper seven design principles of open innovation concept have been proposed. The derived principles are the outcome which is based on the principles of universal design. The open innovation design, based on t...

Design innovativeness and product sales' evolution

OpenAIRE

Rubera, Gaia

2015-01-01

In the last decade, design innovation has gained increasing prominence in the marketplace, with a growing number of firms innovating not only through technology but also through novel product forms (i.e., design). However, while the effect of technological innovation on product sales is a heavily studied topic, a defining theory of how design innovation influences product sales is still missing. This paper provides demand- and supply-side theories to formulate a set of coherent hypothes...

Innovating Business with Pinball Designs

DEFF Research Database (Denmark)

Buur, Jacob; Gudiksen, Sune Klok

Many companies see the need to rethink their ways of doing business, in particular under the pervasive influence of Internet business. Design can play a prominent role here, as a way of expanding from a linear, rational conception of business model development. But rather than proposing ‘design...... business models’ – for example in the form of pinball-like contraptions – encourage participants to play with hypotheses and experiment with scenarios as a way of innovating business models. In a sense this is ‘design thinking’ with hands and body....... thinking’ as an abstract approach, this paper shows how design materials (as used routinely in the design profession), when introduced in a business context can engage a cross-disciplinary circle of stakeholders and challenge them to reconsider their business assumptions. We will show how ‘tangible...

Designers as the Determinants of Aesthetic Innovations

DEFF Research Database (Denmark)

Alkærsig, Lars; Fjællegaard, Cecilie Bryld; Beukel, Karin

the growing interest of firms in aesthetic innovations, knowledge on the ir determinants is limited. Work on labor mobility with in the innovation studies literature focuses mainly on discussion of scientists as crucial for creating technological innovations. This paper adds to work on labor mobility......Aesthetic innovations have become increasingly important appropriation mechanisms for firms. Since 2003, the number of design patent applications (to protect aesthetic innovations) has tripled compared to doubling in the numbers of both patent and trademark applications. However, despite...... and innovation by examining whether this holds in the case of designers' mobility and aesthetic innovations. Does the hiring of a new designer generate more aesthetic innovations than in a matched firm, which does not hire a designer? What is the importance of prior experience with aesthetic innovation...

Designers as determinants for aesthetic innovation

DEFF Research Database (Denmark)

Fjællegaard, Cecilie Bryld; Beukel, Karin; Alkærsig, Lars

The innovation literature states that scientists are core ingredients in creating technological innovations. This paper investigates whether the hiring of a designer generates aesthetic innovations by a firm. Further we investigate what the level of design knowledge of the receiving firm means fo...

Organizational Aspects of Business Model Innovation

DEFF Research Database (Denmark)

Sund, Kristian J.; Villarroel, Juan Andrei; Bogers, Marcel

2014-01-01

in their environment. Our empirical setting focuses on national postal operators in the European postal industry. Using an inductive case study we distinguish between two stages within business model innovation: namely, business model exploration and business model exploitation. Focusing on the former, our findings......Organizations are often challenged to find new ways of creating and capturing value to compete with new entrants and disruptive technologies. Several studies have addressed some of the organizational barriers that incumbents face when developing new business models, but our understanding...... of the organizational (re)design aspects inherent to business model innovation is still very incomplete. In this study, we investigate the organizational (re)design challenges for incumbent organizations in mature industries when they need to reinvent their business model in reaction to disruptive changes...

Organizational Aspects of Business Model Innovation

DEFF Research Database (Denmark)

Sund, Kristian; Bogers, Marcel; Villarroel, Juan Andrei

2014-01-01

Organizations are often challenged to find new ways of creating and capturing value to compete with new entrants and disruptive technologies. Several studies have addressed some of the organizational barriers that incumbents face when developing new business models, but our understanding...... of the organizational (re)design aspects inherent to business model innovation is still very incomplete. In this study, we investigate the organizational (re)design challenges for incumbent organizations in mature industries when they need to reinvent their business model in reaction to disruptive changes...... in their environment. Our empirical setting focuses on national postal operators in the European postal industry. Using an inductive case study we distinguish between two stages within business model innovation: namely, business model exploration and business model exploitation. Focusing on the former, our findings...

On managing innovation by design : Towards SMART methods

NARCIS (Netherlands)

Vermaas, P.E.

2012-01-01

In this paper innovation by design is characterised schematically and methodological with the aim of analysing how projects of innovation by design can be managed. First, I approach innovation by design from an engineering perspective, and show that the incorporation of innovation into design

Complexities in innovation management in companies from the European industry. A path model of innovation project performance determinants

NARCIS (Netherlands)

Tepic, M.; Kemp, R.G.M.; Omta, S.W.F.; Fortuin, F.T.J.M.

2013-01-01

Purpose – The purpose of this paper is to provide an integrated framework of complex relations among innovation characteristics, organizational capabilities, innovation potential and innovation performance. Design/methodology/approach – The model is tested using partial least squares (PLS) modeling

When innovative instructional designs are too innovative

DEFF Research Database (Denmark)

Kjærgaard, Thomas; Wahl, Christian

2015-01-01

and it was developed to include, motivate and encourage the students to engage in more situated learning processes. The course is infamous for low attendance and for demotivating the students. The new instructional design utilized teacher-produced video-clips to qualify the students learning in the preparation...... for the lessons and new pedagogical activities during lessons to make the learning process more situated. The video-clips should also include more students through scaffolding the academic reading with video-clips. However, the outcome was not as planned. The students didn’t recognize the video......This paper presents a study of what happens when innovation of an instructional design is too innovative. The study investigates an implementation process of a new instructional design in nursing education. The new instructional design should be a step away for a functionalist approach to learning...

Social innovation education: towards a framework for learning design

OpenAIRE

Alden Rivers, Bethany; Armellini, Alejandro; Maxwell, Rachel; Allen, Sue; Durkin, Chris

2015-01-01

Purpose—This paper proposes a theoretical framework to support the embedding of social innovation education in existing academic programmes.\\ud Design/methodology/approach—By adopting Conole et al.’s (2004) methodological approach to reviewing, mapping and modelling learning theory, this study addresses four research questions: 1) How can social innovation education be defined? 2) Which learning theories best support social innovation education? 3) How do such learning theories relate to exis...

Linking Design, Marketing, and Innovation: Managing the Connection for Competitive Advantage

OpenAIRE

Dr. Yen Hsu

2012-01-01

Marketing should closely coordinate with product innovation. Not only will an effective connection of the marketing activity and design trigger product innovation in enterprises, it is a key factor to the product success in the market place. In practice, how to process product design so as to reach the goal of marketing during the innovation procedure? In the past, enterprises did have some concrete actions but empirical studies regarding the correlation model between marketing strategy and d...

Design Driven Innovation Practices in Design-preneur led Creative Industry

Directory of Open Access Journals (Sweden)

Philips Kembaren

2014-09-01

Full Text Available Design driven innovation has emerged to be an alternative way to generate sustainable competitive products or services. Previous research has recently revealed succesful practices of design driven innovation in various industries. However, little has been known about the creative companies that practice design driven innovation, especially in developing countries. This research investigates the existence and practices of design-driven innovation in the Indonesian creative industry. Based on interviews with the design-preneurs of the creative industry, one of the results of this study reveals how the Indonesian creative industry creates new meanings that are embedded into new products. Based on the identification, a framework to create new meaningsis resulted which consists of a set of key processes, such as sensing, sensemaking, specifying, setting up and storytelling. The practical contribution of this research is that this identified framework can be adopted by any creative companies interested in improving their innovation capability.

Designing an ICT tool platform to support SME business model innovation: Results of a first design cycle

NARCIS (Netherlands)

de Reuver, G.A.; Athanasopoulou, A.; Haaker, T.I.; Roelfsema, M.; Riedle, M; Breitfuss, G.

2016-01-01

Business model innovation (BMI) is becoming increasingly relevant for enterprises as they are faced with profound changes like digitalization. While business model thinking in academia has advanced, practical tooling that supports business model innovation for small and medium sized enterprises

The Design of Holistic Innovation Policy

DEFF Research Database (Denmark)

Borrás, Susana; Edquist, Charles

looks into a series of issues related to the design of holistic innovation policy. With this purpose in mind, this chapter summarizes previous chapters’ identification of the problems, bottlenecks and deficiencies that can afflict innovation systems. Taken together, they provide the theoretical...... foundations for the design of holistic innovation policy, which includes not only framing the problems in the innovation system, but also considerations about policy instruments for the tasks at hand, as well as the problems generated by policy itself (unintended consequences of inefficient of incomplete...

Development of Innovative Design Processor

International Nuclear Information System (INIS)

Park, Y.S.; Park, C.O.

2004-01-01

The nuclear design analysis requires time-consuming and erroneous model-input preparation, code run, output analysis and quality assurance process. To reduce human effort and improve design quality and productivity, Innovative Design Processor (IDP) is being developed. Two basic principles of IDP are the document-oriented design and the web-based design. The document-oriented design is that, if the designer writes a design document called active document and feeds it to a special program, the final document with complete analysis, table and plots is made automatically. The active documents can be written with ordinary HTML editors or created automatically on the web, which is another framework of IDP. Using the proper mix-up of server side and client side programming under the LAMP (Linux/Apache/MySQL/PHP) environment, the design process on the web is modeled as a design wizard style so that even a novice designer makes the design document easily. This automation using the IDP is now being implemented for all the reload design of Korea Standard Nuclear Power Plant (KSNP) type PWRs. The introduction of this process will allow large reduction in all reload design efforts of KSNP and provide a platform for design and R and D tasks of KNFC. (authors)

Networked Learning and Design Based Research for welfare innovation through further education

DEFF Research Database (Denmark)

Østergaard, Rina; Sorensen, Elsebeth Korsgaard

2014-01-01

Abstract This paper sets out on a reflective journey to investigate, theoretically, the potential of a marriage between Networked Learning (NL) and Design Based Research (DBR) (Barab & Squire, 2004) in a creative and innovative pedagogical practice for welfare professionals. With reference...... the entities of a model, which integrate the above mentioned relationships in learning designs. The suggested networked model offers possibilities of innovative learning in further educations. At the same time – in parallel – the suggested networked model offers possibilities of data generation to be used...... help and qualify the development of innovative DBR and NL designs directed towards the future. Assuming the views outlined and promoted in this paper, the authors claim that researchers in the field as well as welfare professionals in pedagogical, social and health areas, must display creative...

Conceptual Underpinnings for Innovation Policy Design

DEFF Research Database (Denmark)

Borrás, Susana; Edquist, Charles

of innovation policy. This serves two important purposes. Firstly, it allows the identification of problems in an innovation system that require public policy intervention through the choice of appropriate policy instruments. Secondly, it allows a theoretically based identification of input indicators......In cases where innovation indicators and data fail to serve properly as a (necessary) basis for the design of innovation policies, it often has its roots in conceptual unclarities in the underlying concepts. The aim of this paper is to provide a theoretical and conceptual basis for the design...

Corporate Innovation Management Framework Based On Design Thinking

DEFF Research Database (Denmark)

Efeoglu, Arkin; Møller, Charles; Serie, Michel

2014-01-01

This paper proposes use of an Innovation Management Framework through the roll-out of Design Thinking in a multi-national company by applying adequately framed organizational governance. An Innovation Management Framework based on the principles of Design Thinking is providing central pillars...... that not only ensure effective governance. The elevation both from Innovation Management to foster Design Thinking and vice versa the Design Thinking characteristics that strengthen the corporate innovativeness through governance is in focus. With the latter in mind, this paper therefor looks on Innovation...... to be governed. An Innovation Management Framework with principles of DT may avoid uncoordinated innovation capabilities. Ultimately innovation will not be an R&D topic anymore but become part for every employee’s job, irrespective of his or her position. In a previous paper DT characteristics were evaluated...

Exploration through Business Model Innovation

DEFF Research Database (Denmark)

Knab, Sebastian; Rohrbeck, René

2015-01-01

With this research we aim to enhance our understanding about how incumbents can explore emerging opportunities through business model innovation. Using a multiple-case, longitudinal research design spanning 2008 to 2014 we investigate exploration activities of the four largest German energy...... utilities in the emerging virtual power plant market. Based on the behavioral theory of the firm, we study how the cognitive and physical elements of an incumbent’s strategy can be changed and how these changes affect its business model innovation activities in the exploration process. Our preliminary...... findings suggest that the use of synergies and probing can lead to changing physical elements and primarily increase business model maturity. CEO change and structural separation can lead to changing cognitive elements and primarily increase business model sophistication....

Innovative approaches to clinical development and trial design

Directory of Open Access Journals (Sweden)

John J Orloff

2011-01-01

Full Text Available Pharmaceutical innovation is increasingly risky, costly and at times inefficient, which has led to a decline in industry productivity. Despite the increased investment in R&D by the industry, the number of new molecular entities achieving marketing authorization is not increasing. Novel approaches to clinical development and trial design could have a key role in overcoming some of these challenges by improving efficiency and reducing attrition rates. The effectiveness of clinical development can be improved by adopting a more integrated model that increases flexibility and maximizes the use of accumulated knowledge. Central to this model of drug development are novel tools, including modelling and simulation, Bayesian methodologies, and adaptive designs, such as seamless adaptive designs and sample-size re-estimation methods. Applications of these methodologies to early- and late-stage drug development are described with some specific examples, along with advantages, challenges, and barriers to implementation. Because they are so flexible, these new trial designs require significant statistical analyses, simulations and logistical considerations to verify their operating characteristics, and therefore tend to require more time for the planning and protocol development phase. Greater awareness of the distinct advantages of innovative designs by regulators and sponsors are crucial to increasing the adoption of these modern tools.

Designing a Business Model for Environmental Monitoring Services Using Fast MCDS Innovation Support Tools

Directory of Open Access Journals (Sweden)

Tuomo Eskelinen

2017-11-01

Full Text Available The free availability of open data provides opportunities to start new businesses and gain business intelligence. However, although data is often used to support decisions and actions, the possibilities offered by modern sensor technologies with connections to cloud-based data collection services are not being effectively capitalized. Data collection systems are also not generally open source solutions, even though open and flexibly adjustable systems would broaden the opportunities for solutions and larger revenue streams. In this article, we used action research methods to discover new business opportunities in a semi-open information system that utilizes environmental monitoring data. We applied a four-stage innovation process for industry, which included context definition, idea generation, and selection, and produced multi-criteria decision support (MCDS data to help the design of business model. This was done to reveal business opportunities for an environmental monitoring service. Among these opportunities, one service-style business model canvas was identified as feasible and selected for further development. We identified items that are needed in the commercialization process of environmental monitoring services. Our process combines open environmental monitoring data, participative innovation process, and MCDS support, and it supports and accelerates a co-creative business model creation process that is cost-beneficial in terms of saving time. The results are applicable to the creation of an open data information system that supports data-driven innovation.

Internationalization through business model innovation: In search of relevant design dimensions and elements

DEFF Research Database (Denmark)

Rask, Morten

2014-01-01

Internationalization through business model innovation involves the creation, or reinvention, of the business itself. This paper aims to integrate basic insight from the literature on business model innovation, internationalization of the firm, international entrepreneurship and global marketing...

Systemic aspects of innovation and design the perspective of collaborative networks

CERN Document Server

Mortati, Marzia

2013-01-01

The book provides a snapshot of a hot topic – the systemic nature of innovation and its relevance to design – with a trifold perspective: the academic level – the literature on innovation studies and design is often neglected and a clear connection between the two topics taken for granted; the research level – collaborative models are currently considered great opportunities for transforming consumption, production and distribution of goods, but a clear scholarly discourse is still forming; the political level – the European Commission and the OECD are devoting much effort to understanding and measuring the impact of design in innovation processes and firms and a clear contribution would greatly support this path. Thus the book provides an informed, historical and nuanced perspective to the relationship between design and innovation to contribute to all three levels and to propose a point of view that goes beyond aesthetics and meanings.

Research on knowledge support technology for product innovation design based on quality function knowledge deployment

Directory of Open Access Journals (Sweden)

Kai Zhang

2016-06-01

Full Text Available Based on the analysis of the relationship between the process of product innovation design and knowledge, this article proposes a theoretical model of quality function knowledge deployment. In order to link up the product innovation design and the knowledge required by the designer, the iterative method of quality function knowledge deployment is refined, as well as the knowledge retrieval model and knowledge support model based on quality function knowledge deployment are established. In the whole life cycle of product design, in view of the different requirements for knowledge in conceptual design stage, components’ configuration stage, process planning stage, and production planning stage, the quality function knowledge deployment model could link up the required knowledge with the engineering characteristics, component characteristics, process characteristics, and production characteristics in the four stages using the mapping relationship between the function characteristics and the knowledge and help the designer to track the required knowledge for realizing product innovation design. In this article, an instance about rewinding machine is given to demonstrate the practicability and validity of product innovation design knowledge support technology based on quality function knowledge deployment.

Designing Users/Designing Innovation

DEFF Research Database (Denmark)

The paper addresses issues of user conceptualisation and representation in the processes of designing and innovating artifacts and use-practices. It is informed by early as well as more recent insights from technology studies within the new sociology of technology (e.g. Akrich 1995, Bijker & Law...... and competencies. Characteristic of these projects are the interplay between the social and the technical dimensions in the process of product development, and the students are expected to apply socio-technical methodologies in their strategies. The students’ need to inform the design through iteratively...... themes ranging from user-oriented design to product redesign and workspace design, etc. It is expected that some of the insights gained from these projects may be related outside of the immediate context of the classroom, to inform the notion of competencies in engineering design and sociotechnical...

The interrelation between design and innovation - the role of different professional backgrounds

DEFF Research Database (Denmark)

Minder, Bettina; Lassen, Astrid Heidemann

2017-01-01

Design and innovation share the interest in creativity and development of novel solutions. However, literature does also provides sufficient material pointing to divergent views on the interrelation between two fields, where the focus lies on the distinction between two opposing discourses: one...... focusing on human-centeredness processes, the other favouring more linear process models (innovation management). Hence, design is increasingly often considered in innovation management because (not despite) the conflicts from different world-views (Brown, 2008, Boland and Collopy, 2004). Conceptual...... clarity becomes however more and more important, because the inclusion of design perspectives happen in situation, which require conscious shaping of innovation environment to harness complexity (Garud and Karnoe, 2013). This paper addresses the question of how the two concepts are understood...

Computational Design Modelling : Proceedings of the Design Modelling Symposium

CERN Document Server

Kilian, Axel; Palz, Norbert; Scheurer, Fabian

2012-01-01

This book publishes the peer-reviewed proceeding of the third Design Modeling Symposium Berlin . The conference constitutes a platform for dialogue on experimental practice and research within the field of computationally informed architectural design. More than 60 leading experts the computational processes within the field of computationally informed architectural design to develop a broader and less exotic building practice that bears more subtle but powerful traces of the complex tool set and approaches we have developed and studied over recent years. The outcome are new strategies for a reasonable and innovative implementation of digital potential in truly innovative and radical design guided by both responsibility towards processes and the consequences they initiate.

Designing Geoscience Educational Innovations That Propagate

Science.gov (United States)

Lea, P.

2014-12-01

NSF and other funders have supported the development of undergraduate STEM educational innovations over the past decades, only to see many yield limited uptake and impact beyond the grantee institutions. Numerous factors contribute to this complex problem, but one cause is likely insufficient incorporation of the understanding of how innovations propagate into project design. Following J.W. Dearing and colleagues, "dissemination" can be characterized by "push" approaches, which mainly emphasize one-to-many information sharing. In TUES/CCLI proposals, dissemination strategies have commonly taken the form of the "3 Ps" (presenting, publishing and posting) , with overall modest impact. Since the seminal work of Everett Rogers, however, "diffusion" of innovations has been understood as an inherently social process among potential adopters, which interacts with community norms and existing practices. Keys to diffusion include close understanding of the needs and context of the potential-adopter community and the development of "pull" within it, as well as support for implementation of innovations. Potential approaches to facilitating diffusion of innovations include a) using "lean start-up" methodologies (e.g., NSF's I-Corps-L program), in which explicit business-model hypotheses are tested through customer-discovery interviews, commonly leading to pivots where initial hypotheses are not confirmed, b) providing a range of potential commitment levels for adopters tailored to levels of support ("reverse Kickstarter model"), c) supporting decentralized communities of practice in which adaptations and tacit knowledge can readily be shared, d) encouraging crowd-sourcing of innovations, with an "architecture of participation" informed by successful open-source projects, and e) integrating innovations with discipline-based educational research, e.g., big-data approaches which allow A/B testing and analysis of clickstream data that reveal behaviors along a novice

Business Model Innovation Leadership

DEFF Research Database (Denmark)

Lindgren, Peter; Rasmussen, Ole Horn

2012-01-01

Leading business model (BM) strategizing through “the field of innovation” has not yet been covered in business model and innovation leadership literature. This is a bit peculiar considering that there has been an increased focus on BM innovation (BMI) by academics and industry since 2011......”. This emphasizes the importance of questioning. How is BM innovation leadership (BMIL) carried out in companies related to various BM(s) and BMI tasks and throughout their business model innovation process? And, how can innovation leadership be related to BMI? A framework model for BMIL based on case research...

Co-designing business models

DEFF Research Database (Denmark)

Gudiksen, Sune Klok

2015-01-01

in a system, product or service for a particular end-user. In this dissertation, co-design and design games enter a new frontier - business models - and move towards being a part of a broader innovation agenda. The research deals with a double concern: First, the transfer of co-design and the subfield design...... games into business model experimentation to investigate how this might be useful in this new application domain. Second, investigate what can be added to the transferring field co-design, hereunder especially design games. The research into this double concern is conducted through an approach assembled...... of business cases and games are investigated through video interaction analysis, observations during the activities, and evaluation rounds. Central to the first concern in this research is that in innovation studies and in business practises the notion of business model experimentation is becoming...

Business Models for Open Innovation

DEFF Research Database (Denmark)

Saebi, Tina; Foss, Nicolai Juul

Research on open innovation suggests that companies benefit differentially from adopting open innovation strategies; however, it is unclear why this is so. One possible explanation is that companies’ business models are not attuned to open strategies. Accordingly, we propose a contingency model o...... to the open innovation literature by specifying the conditions under which business models are conducive to the success of open innovation strategies.......Research on open innovation suggests that companies benefit differentially from adopting open innovation strategies; however, it is unclear why this is so. One possible explanation is that companies’ business models are not attuned to open strategies. Accordingly, we propose a contingency model...... of open business models by systematically linking open innovation strategies to core business model dimensions, notably the content, structure, governance of transactions. We further illustrate a continuum of open innovativeness, differentiating between four types of open business models. We contribute...

Business Models for Open Innovation

DEFF Research Database (Denmark)

Saebi, Tina; Foss, Nicolai J.

2015-01-01

Research on open innovation suggests that companies benefit differentially from adopting open innovation strategies; however, it is unclear why this is so. One possible explanation is that companies' business models are not attuned to open strategies. Accordingly, we propose a contingency model o...... to the open innovation literature by specifying the conditions under which business models are conducive to the success of open innovation strategies.......Research on open innovation suggests that companies benefit differentially from adopting open innovation strategies; however, it is unclear why this is so. One possible explanation is that companies' business models are not attuned to open strategies. Accordingly, we propose a contingency model...... of open business models by systematically linking open innovation strategies to core business model dimensions, notably the content, structure, governance of transactions. We further illustrate a continuum of open innovativeness, differentiating between four types of open business models. We contribute...

Cork Design : A Design Action Intervention Approach Towards Sustainable Product Innovation

NARCIS (Netherlands)

Mestre, A.C.C.M.

2014-01-01

The study Cork Design: A Design Action Intervention Approach Towards Sustainable Product Innovation comprises the systematic implementation of sustainable product innovation within the Portuguese cork sector, through action research. Cork is a natural, recyclable, non-toxic, and renewable resource,

Study on Product Innovative Design Process Driven by Ideal Solution

Science.gov (United States)

Zhang, Fuying; Lu, Ximei; Wang, Ping; Liu, Hui

Product innovative design in companies today relies heavily on individual members’ experience and creative ideation as well as their skills of integrating creativity and innovation tools with design methods agilely. Creative ideation and inventive ideas generation are two crucial stages in product innovative design process. Ideal solution is the desire final ideas for given problem, and the striving reaching target for product design. In this paper, a product innovative design process driven by ideal solution is proposed. This design process encourages designers to overcome their psychological inertia, to foster creativity in a systematic way for acquiring breakthrough creative and innovative solutions in a reducing sphere of solution-seeking, and results in effective product innovative design rapidly. A case study example is also presented to illustrate the effectiveness of the proposed design process.

Business Model Innovation Portfolio Strategy for Growth Under Product-Market Configurations

OpenAIRE

Bert Verhoeven; Lester W. Johnson

2017-01-01

Purpose: The research links three concepts: product market growth strategy, the magnitude of innovation and Business Model Innovation, merging them together into a dynamic Business Model Innovation strategy framework. Design/Methodology/Approach: The paper is conceptual and exploratory in nature and builds on existing literature and the author’s experience with developing business models. Findings: The BMI strategy framework can help managers establish a BMI portfolio strategy followi...

Using Design-Based Research in Higher Education Innovation

Science.gov (United States)

Ford, Cristi; McNally, Darragh; Ford, Kate

2017-01-01

This paper discusses the design-based research approach used by the Center for Innovation in Learning and Student Success (CILSS) at the University of Maryland, University College (UMUC). CILSS is a laboratory for conducting applied research that focuses on continuous improvements to the university's instruction of curriculum, learning models, and…

Collective Innovation Practice through User-centred Design Thinking

DEFF Research Database (Denmark)

Poulsen, Søren Bolvig; Lassen, Astrid Heidemann; Wandahl, Søren

2012-01-01

thinking with its principles and mind-set can facilitate a common and collaborative effort within a value chain towards a joint innovative practice. Design thinking is unfolded through existing literature and it’s virtue as a facilitating and joining approach is tested through the application within...... the research project Innodoors. It is concluded user-centred material through the video media can enable practitioners from a value chain to establish a common understanding of innovation paths – potential directions for innovation. In addition it is concluded that design thinking can be adapted...... innovation has added significant aspects to the field of innovation management (e.g. Chesbrough, 2003) and companies can innovate with user collaboration or amplified notion of user together with hybrid collaborative constellations and new ways of working (von Hippel 2005). This paper examines how design...

Design Management Capability and Product Innovation in SMEs

OpenAIRE

Fernández-Mesa, Ana Isabel; ALEGRE VIDAL, JOAQUIN; CHIVA GOMEZ, RICARDO; Gutiérrez Gracia, Antonio

2013-01-01

[EN] Purpose The aim of this paper is to present design management as a dynamic capability and to analyze its mediating role between organizational learning capability and product innovation performance in small and medium enterprises (SMEs). Design/methodology/approach Structural equation modeling is used to test the research hypotheses based on data from the Italian and Spanish ceramic tile industries. The data are derived from the responses of 182 companies (50 percent of the targ...

Business Model Innovation Leadership

DEFF Research Database (Denmark)

Lindgren, Peter

2012-01-01

When SME´s practice business model (BM) innovation (BMI), leading strategically BMs through the innovation process can be the difference between success and failure to a BM. Business Model Innovation Leadership (BMIL) is however extremely complex to carry out especially to small and medium size...

Co-Designing and Co-Teaching Graduate Qualitative Methods: An Innovative Ethnographic Workshop Model

Science.gov (United States)

Cordner, Alissa; Klein, Peter T.; Baiocchi, Gianpaolo

2012-01-01

This article describes an innovative collaboration between graduate students and a faculty member to co-design and co-teach a graduate-level workshop-style qualitative methods course. The goal of co-designing and co-teaching the course was to involve advanced graduate students in all aspects of designing a syllabus and leading class discussions in…

Design and Innovation: Organizational Culture as Making

DEFF Research Database (Denmark)

Christensen, Poul Rind; Junginger, Sabine

2013-01-01

Designing, as an activity, is squeezed in a paradoxical agency between reproduction and innovation of meanings in society as well as in the organization. In this conceptual paper the apparent paradox is addressed in perspective of the organizational culture theory and examine the role of design...... in reproducing and innovating dominant organizational cultures....

Nurses and nurse assistants' experiences with using a design thinking approach to innovation in a nursing home.

Science.gov (United States)

Eines, Trude Fløystad; Vatne, Solfrid

2018-05-01

The aim of this study was to evaluate nurses' and nurse assistants' experiences with a design thinking approach to innovation used in a nursing home in Norway. A design thinking approach to innovation that focuses on users' needs can be employed to address many of the challenges facing health care providers in a field facing a growing ageing population, complex diseases and financial shortfalls. This study is based on a thematic analysis of four focus group interviews with nurses and nurse assistants (n = 23). In the initial phase of developing the new service model, which included defining staff roles and responsibilities, participating nurses and nurse assistants felt engaged and motivated by the designers' inclusive and creative methods. However, during the new model's testing phase, they were critical of management's lack of involvement in the model`s implementation and therefore became less motivated about the project. The findings of the study highlight the importance of the designers cooperating with management and staff for the duration of the innovation process. Challenging innovation processes require strong managers who engage with designers, patients, staff and volunteers throughout all phases of an innovation process using a design thinking approach. © 2017 John Wiley & Sons Ltd.

ASIE Model: An Innovative Instructional Design Model for Teachers in Enhancing and Sustaining the Quality of the 21st Century Learning

Directory of Open Access Journals (Sweden)

Ismail Md Zain

2017-04-01

Full Text Available An effective and systematic design of instruction will determine the quality of learning and teaching practices. Hence, instructional design models are required, to move from just adopting a standard approach to developing models that have an impact on learners' profiles, creating a much better learning experience, skills, and knowledge both in the classroom and online. The 21st Century Learning Framework requires learners to develop their thinking skills, communication skills, collaborating skills and enhancing their creativity, (4Cs towards establishing "globally competitive learners." An Integral ASIE Instructional Design Model is an innovative 21st Century teachers' designing tool that provides a solution to the above challenges. The Model assist teachers in Planning, Utilizing and Sharing (PLUS instructions with others across nations. It promotes the Professional Learning Community practices where educationist, stakeholders, parents, and corporates work collaboratively ensuring its quality and sustainability in addressing the future employability issues of the learners. Results from 5 Likert Scales Questionnaires given to teachers in workshops and pilot project conducted, shows positive views on the model.

Innovating through collaborative business models

DEFF Research Database (Denmark)

Gjerding, Allan Næs; Kringelum, Louise Tina Brøns

The present paper presents a novel generalization of business model innovation as an activity taking place across a development and an extension zone, where business model innovation occurs as minor, medium and major changes within both zones. The model explains the process of creating new activi......, and that there exists a dialec-tical relationship between sources of selection and sources of survival, which tend to re-inforce one another. This constitutes a new aspect of business model innovation.......The present paper presents a novel generalization of business model innovation as an activity taking place across a development and an extension zone, where business model innovation occurs as minor, medium and major changes within both zones. The model explains the process of creating new activity......-ered as a coherent system. The generalization is explicated in terms of different domi-nant market logics in which collaborative efforts can be positioned. Underlying this presentation, the paper argues that business model innovation involves uncertainty to the degree that innovation is based on cooperative efforts...

The Exploration of Design Driven Innovation as a Dynamic Capability

Directory of Open Access Journals (Sweden)

Philips Kembaren

2012-01-01

Full Text Available Innovation enables companies to attain consistent organic growth that brings benefits to stakeholders. Designthinking approach in innovation has been emergent to be an alternative to technological development path inorder to generate competitive and successful product or service in the market place. Design driven innovationcombines functional and semantic dimensions of products or services in the marketplace. Previous researchhas recently revealed practices of design driven innovation in various industries. However, little is known tothe extent that companies in Indonesia practicing design driven innovation. A theoretical framework withperspective from dynamic capability theoretical lens and guided by Dubin’s theory building methodology isproposed to explain the constructs and role of design in the process of innovation. The research is expected tocontribute a new construct to the existing framework, namely construct that related to how we could assessthe value of the design-driven innovation output, perceived by the costumers.Keywords: design driven innovation, dynamic capabilities, theory building

Business models for open innovation: Matching heterogeneous open innovation strategies with business model dimensions

OpenAIRE

Saebi, Tina; Foss, Nicolai Juul

2015-01-01

-This is the author's version of the article:"Business models for open innovation: Matching heterogeneous open innovation strategies with business model dimensions", European Management Journal, Volume 33, Issue 3, June 2015, Pages 201–213 Research on open innovation suggests that companies benefit differentially from adopting open innovation strategies; however, it is unclear why this is so. One possible explanation is that companies' business models are not attuned to open strategies. Ac...

The Curriculum Innovation Canvas: A Design Thinking Framework for the Engaged Educational Entrepreneur

Science.gov (United States)

Willness, Chelsea; Bruni-Bossio, Vince

2017-01-01

Integrating literature on entrepreneurial business models and community-based experiential learning, we propose a new framework to advance the practice of curriculum innovation. Grounded in principles of design thinking, the curriculum innovation canvas provides a human-centered, collaborative, and holistic platform for instructors, curriculum…

Directed Innovation of Business Models

Directory of Open Access Journals (Sweden)

Stelian Brad

2016-06-01

Full Text Available Business model innovation is an important issue to keep business competitive and increase company’s profits. Due to many market attractors, identification of appropriate paths of business model evolution is a painful and risky process. To improve decision’s effectiveness in this process, an architectural construct of analysis and conceptualization for business model innovation that combines directed evolution and blue ocean concepts is proposed in this paper under the name of directed innovation. It displays the key points where innovations would happen to direct adaptation of the business model towards sustainable competitiveness. Formulation of mature solutions is supported by inventive problem solving tools. The significance of the directed innovation approach is demonstrated in a case study dealing with business model innovation of a software company.

A mobile design lab for user-driven innovation

DEFF Research Database (Denmark)

Christiansen, Ellen; Kanstrup, Anne Marie

2007-01-01

The paper presents the history and conceptual foundation for the Mobile Design Lab, ment to support both designers and users in the acts of user-driven innovation. The Mobile Design Lab is based on Vygotsky's theory of tool- and language-mediation, and was created in 2004 to support research...... and teaching of user driven innovation. Being itself an example of user-driven innovation it has taken shape of HCI design research projekcts, in which we have been involved since 2004. The first challenge was to get 'out of the lab', the next to get 'out of the head', and finally we are currently working...

Post-Occupancy Evaluation of a Mental Healthcare Facility Based on Staff Perceptions of Design Innovations.

Science.gov (United States)

Kalantari, Saleh; Snell, Robin

2017-07-01

This study was a post-occupancy evaluation (POE) to examine the effectiveness of three specific design innovations in a mental healthcare facility. In addition to collecting data about the impact of these specific designs, the study provides a model for the broader implementation of POE approaches in the mental healthcare context. POEs in general healthcare settings have been shown to lead to better work environments and better outcomes for patients. Despite growing evidence of the value provided by POE studies, the industry has been somewhat slow to adopt their regular use, in part due to unfamiliarity with the POE process. This is particularly true in mental healthcare contexts, where POE studies remain virtually nonexistent. In-depth interviews and a widely distributed, anonymous survey were used to collect hospital staff perceptions and feedback regarding the impact of specific design features. The hospital staff were quite enthusiastic about two of the design innovations studied here (a new wayfinding strategy and the use of vibrant colors in specific areas of the facility). The third innovation, open-style communication centers, elicited more mixed evaluations. The results include extensive hypothesis testing about the effects of each innovation as well as narrative discussions of their pros and cons. The study generated new knowledge about three specific mental healthcare design innovations and provides a model for the practical implementation of a POE approach in mental healthcare contexts. The results are particularly relevant for designers who are considering innovative strategies in future mental healthcare facilities.

Design and Innovation - The DTU programme

DEFF Research Database (Denmark)

Alting, Leo; Andreasen, Mogens Myrup; Boelskifte, Per

2006-01-01

of the accompanying research. It is illustrated how the development of particularly the socio-technical dimensions of design and innovation are based on a close observation of the challenges facing industry. The new competences are expected to support modernisation of industrial methods and organisational schemes......The new design & innovation programme at DTU represents a fundamental rethinking of the standard concepts dominating most engineering educations. The teaching, its background, context and basic educational ideas are presented and discussed in this paper together with the basic ideas...

UX Design Innovation

DEFF Research Database (Denmark)

Dove, Graham; Halskov, Kim; Forlizzi, Jodi

2017-01-01

be because it is a new and difficult design material. To better understand why we have witnessed little design innovation, we conducted a survey of current UX practitioners with regards to how new ML services are envisioned and developed in UX practice. Our survey probed on how ML may or may not have been...... a part of their UX design education, on how they work to create new things with developers, and on the challenges they have faced working with this material. We use the findings from this survey and our review of related literature to present a series of challenges for UX and interaction design research...... and education. Finally, we discuss areas where new research and new curriculum might help our community unlock the power of design thinking to re-imagine what ML might be and might do....

LASER CUTTING AS AN INNOVATIVE CREATIVITY TOOL IN TEXTILE DESIGN

Directory of Open Access Journals (Sweden)

Banu Hatice Gurcum

2016-12-01

Full Text Available Innovative technologies have become the most widespread rapid and flexible technique of cutting, welding, printing and coloring in fashion and textile sectors in a very short time. Laser systems as the most common used innovative technology engrave, cut, form, print, shade appropriated formatted drawings and sketches as well as they provide reliable placements for the lay out plans and precision cutting and the production sector rapid and qualified. The practical applications and conveniences that innovative Technologies employ, influence design process, designers can design in a more creative, rapid, precise and effective manner. Although design is a context where technology is effective, the style, mood and the background of the designer is still important. Designers while making innovative studies should take the advantage of the developing technologies in experimental processes and should combine technological opportunities with aesthetics. Textile designer as in all other domains of design, should harmonise with the change and should define his/her style with the innovative Technologies in an innovative manner and renew him/herself all the time. This study aims to classify laser cutting technology applications available in textile and fashion sector as well as to present the laser technology as a means of process, product, material innovation and explains the contributions of laser systems to creativity.

Facilitating design and innovation workshops using the Value Design Canvas

NARCIS (Netherlands)

Atasoy, P.; Bekker, M.M.; Lu, Y.; Brombacher, A.C.; Eggen, J.H.; Melkas, H.; Buur, J.

2013-01-01

Design and innovation workshops are common practices to match diverse stakeholders to initiate collaboration for innovation. Due to the complex and multi-faceted processes in such a collaboration workshop, not only the toolkits but also the facilitation of the process needs to be taken into account.

Challenges in biomimetic design and innovation

DEFF Research Database (Denmark)

Lenau, Torben Anker; Barfoed, Michael; Shu, Li

Biomimetic design copies desired principles found in nature and implement them into artificial applications. Applications could be products we use in our daily life but it can also be used to inspire material innovation. However there are significant challenges in performing biomimetic design. One....... This is a key issue in design and innovation work where problem identification and systematic search for suitable solution principle are major activities. One way to deal with this challenge is to use a biology search method. The use of such a method is illustrated with a case story describing the design...... including the terminology and knowledge organisation. It is often easy to recognise the splendour of a biological solution, but it can be much more difficult to understand the underlying mechanisms. Another challenge in biomimetic design is the search and identification of relevant solutions in nature...

Summary of innovation models on a company level – creating a framework for an innovation model that will increase a company’s innovation activity

OpenAIRE

Stefanovska Ceravolo, Ljubica; Polenakovik, Radmil; Dzidrov, Misko

2016-01-01

There are six known and generally accepted generations of innovation models. Innovation models transform from simple, linear models, to integrated and networking models that are dynamic and interactive. Each generation of innovation models is presented in this paper with their characteristics as well as drawbacks. The main goal of this paper is to show the transformation path of innovation models and create a framework for a new innovation model on a company level, that could be used by compa...

Modelling of Innovation Diffusion

Directory of Open Access Journals (Sweden)

Arkadiusz Kijek

2010-01-01

Full Text Available Since the publication of the Bass model in 1969, research on the modelling of the diffusion of innovation resulted in a vast body of scientific literature consisting of articles, books, and studies of real-world applications of this model. The main objective of the diffusion model is to describe a pattern of spread of innovation among potential adopters in terms of a mathematical function of time. This paper assesses the state-of-the-art in mathematical models of innovation diffusion and procedures for estimating their parameters. Moreover, theoretical issues related to the models presented are supplemented with empirical research. The purpose of the research is to explore the extent to which the diffusion of broadband Internet users in 29 OECD countries can be adequately described by three diffusion models, i.e. the Bass model, logistic model and dynamic model. The results of this research are ambiguous and do not indicate which model best describes the diffusion pattern of broadband Internet users but in terms of the results presented, in most cases the dynamic model is inappropriate for describing the diffusion pattern. Issues related to the further development of innovation diffusion models are discussed and some recommendations are given. (original abstract

Action Design Research for Social Innovation: Lessons from Designing a Health and Wellbeing Platform

NARCIS (Netherlands)

de Reuver, G.A.; Keijzer-Broers, W.J.W.

2016-01-01

IT artifacts play an important role in solving societal problems and realizing social innovations. Existing practice-inspired design science research (DSR) approaches, such as Action Design Research (ADR), do not consider social innovation as an explicit starting point for design iterations. In this

A Study for Adjustable Riding Position of the Innovation Bicycle Design

Science.gov (United States)

Huang, Yu-Che; Huang, Tai-Shen

2018-04-01

This research is about the analysis and design of the user in a wheelchair use posture can be changed. So user can through different sitting posture changes to provide different needs, so the folding design patents for the existing data collection and classification, through the analysis of advantages and disadvantages, further to find the innovative design approach. Finally through the multi linkage mechanism system, change the seat, handlebars and rear position, provide different posture context. In order to reduce the cost, this study is designed to integrate the innovation input mechanism, multi linkage system, through the construction of 10 joints and degrees of freedom of the bicycle frame. Then use 3D software to design of bicycle the size of the frame of innovation, through the three-dimensional CAD model to simulate the mechanism between movement and interference, and to evaluate the 3D The virtual prototype can meet the requirement. It will also enable CAE to analyze and determine the strength and the safety of the bicycle frame structure of ANSYS11.0 stress. Finally, we have integrated design through CAID to make a product appearance, the focus of research is mainly a study of CAD, CAE, CAID integration the production and the completion of a prototype.

Students as Learning Designers in Innovation Education

DEFF Research Database (Denmark)

Magnussen, Rikke; Sørensen, Birgitte Holm

2014-01-01

This paper, which concerns criteria for developing technology-enhanced innovation education, discusses how teacher and student relationships change in these learning spaces. The case study in this paper involves a school in Denmark where teachers and students, aged 6-14, were involved in developing...... and testing new forms of technology-enhanced innovation education as part of the establishment of an EduTechLab at the school. Established in new facilities at the school, the lab contained learning technologies such as Nao robots, sensor kits, and 3D visualisation and printing facilities. The goal of the Edu......TechLab project was to establish a creative learning environment for students and teachers that would support innovative practice with new forms of learning technology. Part of this goal was to involve students in innovative design processes in order for them to experiment with their own design solutions to case...

Shape Grammars for Innovative Hybrid Typological Design

DEFF Research Database (Denmark)

Al-kazzaz, Dhuha; Bridges, Alan; Chase, Scott Curland

2010-01-01

This paper describes a new methodology of deriving innovative hybrid designs using shape grammars of heterogeneous designs. The method is detailed within three phases of shape grammars: analysis, synthesis and evaluation. In the analysis phase, the research suggests that original rules of each...... design component are grouped in subclass rule sets to facilitate rule choices. Additionally, adding new hybrid rules to original rules expands the options available to the grammar user. In the synthesis phase, the research adopts state labels and markers to drive the design generation. The former...... is implemented with a user guide grammar to ensure hybridity in the generated design, while the latter aims to ensure feasible designs. Lastly evaluation criteria are added to measure the degree of innovation of the hybrid designs. This paper describes the derivation of hybrid minaret designs from a corpus...

Business model innovation paths

NARCIS (Netherlands)

Chesbrough, H.; Di Minin, Alberto; Piccaluga, A.

2013-01-01

This chapter explains the business model concept and explores the reasons why “innovation” and “innovation in services” are no longer exclusively a technological issue. Rather, we highlight that business models are critical components at the centre of business innovation processes. We also attempt

Innovative multi rotor wind turbine designs

Energy Technology Data Exchange (ETDEWEB)

Kale, S.A.; Sapali, S.N. [College of Engineering. Mechanical Engineering Dept, Pune (India)

2012-07-01

Among the renewable energy sources, today wind energy is the most recognized and cost effective. Developers and researchers in this sector are optimistic and continuously working innovatively to improve the technology. The wind power obtained is proportional to the swept area of wind turbine. The swept area is increased by using a single rotor of large diameter or multi rotors in array. The rotor size is growing continuously with mature technology. Multi rotor technology has a long history and the multi rotor concept persists in a variety of modern innovative systems but the concept has fallen out of consideration in mainstream design from the perception that is complex and unnecessary as very large single rotor units are now technically feasible. This work addresses the evaluation of different multi rotor wind turbine systems. These innovative wind turbines are evaluated on the basis of feasibility, technological advantages, security of expected power performance, cost, reliability, impact of innovative system, comparison with existing wind turbine design. The findings of this work will provide guidelines for the practical and economical ways for further research on the multi rotor wind turbines. (Author)

Designing for social innovation in a prison context

DEFF Research Database (Denmark)

Aakjær, Marie Kirstejn

as a learning outcome, where changes in perceptions, creation of trust and the process of collaborative sense making are pivotal for change and innovation. This is conceptualised as social innovation and it is argued that the concept of social innovation in the prison and probation service presuppose...... the inclusion of human and relational elements. It is concluded that design approaches may serve as levers for social innovation, taking into consideration the interconnectedness of relations, values and assumptions of the innovators and competence in practice....

Antecedents and Consequences of Business Model Innovation

DEFF Research Database (Denmark)

Waldner, Florian; Poetz, Marion; Grimpe, Christoph

2015-01-01

evidence seems to be confined to firm-level antecedents and pays little attention to the impact of industry structure. This study investigates how different stages of an industry’s life cycle and levels of industry competition affect firms’ business model innovation, and how such innovation translates...... into innovation performance. Based on a cross-industry sample of 1,242 Austrian firms, we introduce a unique measure for the degree of innovation in a firm’s business model. The results indicate that the degree of business model innovation is highest toward the beginning of an industry life cycle, that is......What makes firms innovate their business models? Why do they engage in innovating how they create, deliver, and capture value? And how does such innovation translate into innovation performance? Despite the importance of business model innovation for achieving competitive advantage, existing...

Research on the time optimization model algorithm of Customer Collaborative Product Innovation

Directory of Open Access Journals (Sweden)

Guodong Yu

2014-01-01

Full Text Available Purpose: To improve the efficiency of information sharing among the innovation agents of customer collaborative product innovation and shorten the product design cycle, an improved genetic annealing algorithm of the time optimization was presented. Design/methodology/approach: Based on the analysis of the objective relationship between the design tasks, the paper takes job shop problems for machining model and proposes the improved genetic algorithm to solve the problems, which is based on the niche technology and thus a better product collaborative innovation design time schedule is got to improve the efficiency. Finally, through the collaborative innovation design of a certain type of mobile phone, the proposed model and method were verified to be correct and effective. Findings and Originality/value: An algorithm with obvious advantages in terms of searching capability and optimization efficiency of customer collaborative product innovation was proposed. According to the defects of the traditional genetic annealing algorithm, the niche genetic annealing algorithm was presented. Firstly, it avoided the effective gene deletions at the early search stage and guaranteed the diversity of solution; Secondly, adaptive double point crossover and swap mutation strategy were introduced to overcome the defects of long solving process and easily converging local minimum value due to the fixed crossover and mutation probability; Thirdly, elite reserved strategy was imported that optimal solution missing was avoided effectively and evolution speed was accelerated. Originality/value: Firstly, the improved genetic simulated annealing algorithm overcomes some defects such as effective gene easily lost in early search. It is helpful to shorten the calculation process and improve the accuracy of the convergence value. Moreover, it speeds up the evolution and ensures the reliability of the optimal solution. Meanwhile, it has obvious advantages in efficiency of

Business Model Innovation: How Iconic Business Models Emerge

OpenAIRE

Mikhalkina, T.; Cabantous, L.

2015-01-01

Despite ample research on the topic of business model innovation, little is known about the cognitive processes whereby some innovative business models gain the status of iconic representations of particular types of firms. This study addresses the question: How do iconic business models emerge? In other words: How do innovative business models become prototypical exemplars for new categories of firms? We focus on the case of Airbnb, and analyze how six mainstream business media publications ...

Collective innovative practice through user-centred design thinking

DEFF Research Database (Denmark)

Poulsen, Søren Bolvig; Lassen, Astrid Heidemann; Wandahl, Søren

2012-01-01

Establishing a collective innovative practice within a value chain is vital as competition often takes place between supply chains rather than individual companies (Lambert, 2006). This requires new new innovative approaches and an adaptive learning culture (Tyre and von Hippel 1997). User driven...... innovation has added significant aspects to the field of innovation management (e.g. Chesbrough, 2003) and companies can innovate with user collaboration or amplified notion of user together with hybrid collaborative constellations and new ways of working (von Hippel 2005). This paper examines how design...

Prevention through Design Adoption Readiness Model (PtD ARM): An integrated conceptual model.

Science.gov (United States)

Weidman, Justin; Dickerson, Deborah E; Koebel, Charles T

2015-01-01

Prevention through Design (PtD), eliminating hazards at the design-stage of tools and systems, is the optimal method of mitigating occupational health and safety risks. A recent National Institute of Safety and Health initiative has established a goal to increase adoption of PtD innovation in industry. The construction industry has traditionally lagged behind other sectors in the adoption of innovation, in general; and of safety and health prevention innovation, in particular. Therefore, as a first step toward improving adoption trends in this sector, a conceptual model was developed to describe the parameters and causal relationships that influence and predict construction stakeholder "adoption readiness" for PtD technology innovation. This model was built upon three well-established theoretical frameworks: the Health Belief Model, the Diffusion of Innovation Model, and the Technology Acceptance Model. Earp and Ennett's model development methodology was employed to build a depiction of the key constructs and directionality and magnitude of relationships among them. Key constructs were identified from the literature associated with the three theoretical frameworks, with special emphasis given to studies related to construction or OHS technology adoption. A conceptual model is presented. Recommendations for future research are described and include confirmatory structural equation modeling of model parameters and relationships, additional descriptive investigation of barriers to adoption in some trade sectors, and design and evaluation of an intervention strategy.

Disruptive innovation in health care delivery: a framework for business-model innovation.

Science.gov (United States)

Hwang, Jason; Christensen, Clayton M

2008-01-01

Disruptive innovation has brought affordability and convenience to customers in a variety of industries. However, health care remains expensive and inaccessible to many because of the lack of business-model innovation. This paper explains the theory of disruptive innovation and describes how disruptive technologies must be matched with innovative business models. The authors present a framework for categorizing and developing business models in health care, followed by a discussion of some of the reasons why disruptive innovation in health care delivery has been slow.

Collaborative Cloud Manufacturing: Design of Business Model Innovations Enabled by Cyberphysical Systems in Distributed Manufacturing Systems

Directory of Open Access Journals (Sweden)

Erwin Rauch

2016-01-01

Full Text Available Collaborative cloud manufacturing, as a concept of distributed manufacturing, allows different opportunities for changing the logic of generating and capturing value. Cyberphysical systems and the technologies behind them are the enablers for new business models which have the potential to be disruptive. This paper introduces the topics of distributed manufacturing as well as cyberphysical systems. Furthermore, the main business model clusters of distributed manufacturing systems are described, including collaborative cloud manufacturing. The paper aims to provide support for developing business model innovations based on collaborative cloud manufacturing. Therefore, three business model architecture types of a differentiated business logic are discussed, taking into consideration the parameters which have an influence and the design of the business model and its architecture. As a result, new business models can be developed systematically and new ideas can be generated to boost the concept of collaborative cloud manufacturing within all sustainable business models.

Innovation and Business Model: a case study about integration of Innovation Funnel and Business Model Canvas

Directory of Open Access Journals (Sweden)

Fábio Luiz Zandoval Bonazzi

2014-12-01

Full Text Available Unlike the past, currently, thinking about innovation refers to a reflection of value cocreation through strategic alliances, customer approach and adoption of different business models. Thus, this study analyzed and described the innovation process of company DSM, connecting it to concepts of organizational development strategies and the theory of business model. This is a basic interpretive qualitative research, developed by means of a single case study conducted through interviews and documentary analysis. This study enabled us to categorize the company business model as an open, unbundled and innovative model, which makes innovation a dependent variable of this internal configuration of value creation and value capture. As a theoretical contribution, we highlight the convergence and complementarity of the “Business Model Canvas” tool and “Innovation Funnel,” used here, to analyze the empirical case.

Developing a Model for an Innovative Culinary Competency Curriculum and Examining Its Effects on Students' Performance

Science.gov (United States)

Hu, Meng-Lei I-Chen Monica; Horng, Jeou-Shyan; Teng, Chih-Ching

2016-01-01

The present study designs and develops an innovative culinary competency curriculum (ICCC) model comprising seven sections: innovative culture, aesthetics, techniques, service, product, management, and creativity. The model is formulated based on culinary concept, creativity, innovation, and competency theory. The four elements of curriculum…

Behavioral Design Teams: The Next Frontier in Clinical Delivery Innovation?

Science.gov (United States)

Robertson, Ted; Darling, Matthew; Leifer, Jennifer; Footer, Owen; Gordski, Dani

2017-11-01

A deep understanding of human behavior is critical to designing effective health care delivery models, tools, and processes. Currently, however, few mechanisms exist to systematically apply insights about human behavior to improve health outcomes. Behavioral design teams (BDTs) are a successful model for applying behavioral insights within an organization. Already operational within government, this model can be adapted to function in a health care setting. To explore how BDTs could be applied to clinical care delivery and review models for integrating these teams within health care organizations. Interviews with experts in clinical delivery innovation and applied behavioral science, as well as leaders of existing government BDTs. BDTs are most effective when they enjoy top-level executive support, are co-led by a domain expert and behavioral scientist, collaborate closely with key staff and departments, have access to data and IT support, and operate a portfolio of projects. BDTs could be embedded in health care organizations in multiple ways, including in or just below the CEO’s office, within a quality improvement unit, or within an internal innovation center. When running a portfolio, BDTs achieve a greater number and diversity of insights at lower costs. They also become a platform for strategic learning and scaling.

Mastering Technologies in Design-Driven Innovation

DEFF Research Database (Denmark)

Dell'era, Claudio; Marchesi, Alessio; Verganti, Roberto

2010-01-01

Only a few companies have mastered the design-driven approach to innovation. This paper examines what it means to make design a central part of the business process, able to add value to products and create new markets. More specifically, it focuses on the interplay between the functional and sem...

The Innovative Bike Conceptual Design by Using Modified Functional Element Design Method

Directory of Open Access Journals (Sweden)

Nien-Te Liu

2016-11-01

Full Text Available The purpose of the study is to propose a new design process by modifying functional element design approach which can commence a large amount of innovative concepts within a short period of time. Firstly, the original creative functional elements design method is analyzed and the drawbacks are discussed. Then, the modified is proposed and is divided into 6 steps. The creative functional element representations, generalization, specialization, and particularization are used in this method. Every step is described clearly, and users could design by following the process easily. In this paper, a clear and accurate design process is proposed based on the creative functional element design method. By following this method, a lot of innovative bicycles will be created quickly.

Business Model Innovation in Airlines

Directory of Open Access Journals (Sweden)

Bruno Alencar Pereira

2017-03-01

Full Text Available The business models innovation in airlines can contribute to the creation of value, competitive advantage and profitability with new possibilities of action. The proposed paper aimed to identify the business models adopted by airlines and identify how the innovation occurs at these organizations. The methodology adopted is characterized as empirical, exploratory and descriptive research by multiple case study with three major Brazilian airlines. The results demonstrate that the search for paradigm breaks, related to the dichotomic traditional models of low-cost and full-service, toward hybrid business models occur linearly, as examples highlighted by companies, in which internal changes in business models are considered major organizational innovations.

Capturing the value of design thinking in different innovation practices

NARCIS (Netherlands)

Kleinsmann, M.S.; Valkenburg, Rianne; Sluijs, Janneke

2017-01-01

Design thinking has become a popular notion in the field of innovation. What is design thinking really and—even more important—what could be its value in applying it in innovation practices? This paper presents four studies that together capture the value of design thinking in different

The power of design product innovation in sustainable energy technologies

CERN Document Server

Reinders, Angele H; Brezet, Han

2012-01-01

The Power of Design offers an introduction and a practical guide to product innovation, integrating the key topics that are necessary for the design of sustainable and energy-efficient products using sustainable energy technologies. Product innovation in sustainable energy technologies is an interdisciplinary field. In response to its growing importance and the need for an integrated view on the development of solutions, this text addresses the functional principles of various energy technologies next to the latest design processes and innovation methods. From the perspec

Knowledge management driven leadership, culture and innovation success – an integrative model

OpenAIRE

Zieba, M.; Schivinski, Bruno

2015-01-01

Purpose - This article examines the relation between knowledge management (KM) driven leadership, culture and innovation success of knowledge-intensive small and medium sized companies. By building on the previously reported research on leadership, culture, innovation , and knowledge management, we synergistically integrate d KM-driven leadership and innovation success while exploring the meditational role of culture in that. Design/methodology/approach - A conceptual model comprising three c...

Southern Regional Center for Lightweight Innovative Design

Energy Technology Data Exchange (ETDEWEB)

Wang, Paul T. [Mississippi State Univ., Mississippi State, MS (United States)

2012-12-01

The Southern Regional Center for Lightweight Innovative Design (SRCLID) has developed an experimentally validated cradle-to-grave modeling and simulation effort to optimize automotive components in order to decrease weight and cost, yet increase performance and safety in crash scenarios. In summary, the three major objectives of this project are accomplished: To develop experimentally validated cradle-to-grave modeling and simulation tools to optimize automotive and truck components for lightweighting materials (aluminum, steel, and Mg alloys and polymer-based composites) with consideration of uncertainty to decrease weight and cost, yet increase the performance and safety in impact scenarios; To develop multiscale computational models that quantify microstructure-property relations by evaluating various length scales, from the atomic through component levels, for each step of the manufacturing process for vehicles; and To develop an integrated K-12 educational program to educate students on lightweighting designs and impact scenarios. In this final report, we divided the content into two parts: the first part contains the development of building blocks for the project, including materials and process models, process-structure-property (PSP) relationship, and experimental validation capabilities; the second part presents the demonstration task for Mg front-end work associated with USAMP projects.

The Conceptual Design of Innovative Safe PWR

Energy Technology Data Exchange (ETDEWEB)

Kim, Han-Gon [Centural Research Institute, Daejeon (Korea, Republic of); Heo, Sun [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

2016-10-15

Most of countries operating NPPs have been performed post-Fukushima improvements as short-term countermeasure to enhance the safety of operating NPPs. Separately, vendors have made efforts on developing passive safety systems as long-term and ultimate countermeasures. AP1000 designed by Westinghouse Electric Company has passive safety systems including the passive emergency core cooling system (PECCS), the passive residual heat removal system (PRHRS), and the passive containment cooling system (PCCS). ESBWR designed by GE-Hitachi also has passive safety systems consisting of the isolation condenser system, the gravity driven cooling system and the PCCS. Other countries including China and Russia have made efforts on developing passive safety systems for enhancing the safety of their plants. In this paper, we summarize the design goals and main design feature of innovative safe PWR, iPOWER which is standing for Innovative Passive Optimized World-wide Economical Reactor, and show the developing status and results of research projects. To mitigate an accident without electric power and enhance the safety level of PWR, the conceptual designs of passive safety system and innovative safe PWR have been performed. It includes the PECCS for core cooling and the PCCS for containment cooling. Now we are performing the small scale and separate effect tests for the PECCS and the PCCS and preparing the integral effect test for the PECCS and real scale test for the PCCS.

Business model dynamics and innovation

DEFF Research Database (Denmark)

Cavalcante, Sergio Andre; Kesting, Peter; Ulhøi, John Parm

2011-01-01

the impact of specific changes to a firm's business model. Such a tool would be particularly useful in identifying path dependencies and resistance at the process level, and would therefore allow a firm's management to take focused action on this in advance. Originality/value – The paper makes two main...... and specifies four different types of business model change: business model creation, extension, revision, and termination. Each type of business model change is associated with specific challenges. Practical implications – The proposed typology can serve as a basis for developing a management tool to evaluate......Purpose – This paper aims to discuss the need to dynamize the existing conceptualization of business model, and proposes a new typology to distinguish different types of business model change. Design/methodology/approach – The paper integrates basic insights of innovation, business process...

A staged service innovation model

NARCIS (Netherlands)

Song, L.Z.; Song, Michael; Benedetto, Di A.C.

2009-01-01

Drawing from the new product development (NPD) literature, service quality literature (SERVQUAL), and empirically grounded research with 53 service innovation decision makers, we develop a staged service innovation model (SIM) for decision makers. We tested the model using empirical data from 329

Innovation Design Creating Value for People, Organizations and Society

CERN Document Server

den Ouden, Elke

2012-01-01

Innovation Design presents an approach to designing shared value for businesses, non-profit organizations, end-users and society. The societal and economic challenges we are currently facing – such as the aging population, energy scarcity and environmental issues – are not just threats but are also great opportunities for organizations. Innovation Design shows how organizations can contribute to the process of generating value for society by finding true solutions to these challenges. And at the same time it describes how they can capture value for themselves in business ecosystems that care for both people and planet. This book covers: ·         Creating meaningful innovations that improve quality of life, engage users and provide value for organizations and other stakeholders; ·         Guiding the creation of shared value throughout the innovation process, with a practical and integrative approach towards value that connects ideas from economics, psychology, sociology and ecology; ·�...

Business model engineering: creating non-linear growth effects for service innovations

NARCIS (Netherlands)

Kijl, Björn; Ehrenhard, Michel Léon; Wijnhoven, Alphonsus B.J.M.; Nieuwenhuis, Lambertus Johannes Maria; Boersma, D.

2012-01-01

Every service innovation needs a viable business model in order to create and capture value. Strikingly, most of the current literature is focused on business model design only, whereas almost no attention is given to business model validation and implementation – let alone experimentation with

WHETHER OPEN INNOVATION IS A BETTER CHOICE AS A MODEL OF INNOVATION FOR ORGANIZATIONS?

OpenAIRE

KANBUR, AYSUN; A. H. MOHAMED, Ibrahim

2018-01-01

This studypresents a review of innovation models and by taking consideration andexamining these models it is aimed to understand whether the model based onopen innovation is a better choice among all the other models. Fororganizations, innovation models generally demonstrate how to work in aninnovative point of view. Companies of today’s business life are striving todevelop their capabilities and their activities to become innovative companies.Many of the organizations try to find the most su...

Improving innovation strategic decision-making through the collaboration with design consultancies

NARCIS (Netherlands)

Calabretta, G.; Gemser, G.; Wijnberg, N.; Hekkert, P.P.M.

2012-01-01

Innovation and design literature have given limited consideration to the strategic role of design consultancies in the innovation processes of their clients. A plausible explanation is the difficulty to assess the quality of design consultancies’ output, given the intangibility of the output itself

Managing Actors, Resources, and Activities in Innovation Ecosystems – A Design Science Approach

OpenAIRE

Valkokari , Katri; Amitrano , Cristina ,; Bifulco , Francesco; Valjakka , Tiina

2016-01-01

Part 13: Design Science and Business Models - Design Science Research; International audience; Through a design science approach, the paper explores how actors in a network create and sustain competitive advantage independently and through participation in a system of actors (i.e., a collaborative network) who are not hierarchically managed but, rather, act toward their own goals within the innovation ecosystem. In accordance with design studies, the relevance of research and its quality are ...

Experience economy meets business model design

DEFF Research Database (Denmark)

Gudiksen, Sune Klok; Smed, Søren Graakjær; Poulsen, Søren Bolvig

2012-01-01

Through the last decade the experience economy has found solid ground and manifested itself as a parameter where business and organizations can differentiate from competitors. The fundamental premise is the one found in Pine & Gilmores model from 1999 over 'the progression of economic value' where...... produced, designed or staged experience that gains the most profit or creates return of investment. It becomes more obvious that other parameters in the future can be a vital part of the experience economy and one of these is business model innovation. Business model innovation is about continuous...

A TRANSFERABLE MODEL FOR INNOVATIVE JOINT POSTGRADUATE DEGREE PROGRAMME DEVELOPMENT

DEFF Research Database (Denmark)

Maclachlan, Ross; Ion, William; Kochanowska, Rowena

2009-01-01

aim of the programme is to produce graduates with an expanded perspective of innovation management to meet the needs of global industry. In particular this is to be achieved through a curriculum that integrates design based modules with progressive innovation and technology management education....... The collaboration brings depth and breadth to the innovation curriculum, and the student experience, through student mobility and the complementary expertise of partners. However, for higher education institutions to effectively collaborate at both administrative and academic levels, a number of new challenges must...... be overcome. This paper reflects on specific challenges met during development of the GIM programme and presents a programme model addressing these. The model is presented as transferable to other consortia and as basis for a set of tentative principles for joint programme development with particular...

The link between health governance models and global health innovation: an exploration of OECD nations.

Science.gov (United States)

Schnarr, Karin; Snowdon, Anne; Cramm, Heidi; Cohen, Jason; Alessi, Charles

2015-01-01

While there is established research that explores individual innovations across countries or developments in a specific health area, there is less work that attempts to match national innovations to specific systems of health governance to uncover themes across nations. We used a cross-comparison design that employed content analysis of health governance models and innovation patterns in eight OECD nations (Australia, Britain, Canada, France, Germany, The Netherlands, Switzerland, and the United States). Country-level model of health governance may impact the focus of health innovation within the eight jurisdictions studied. Innovation across all governance models has targeted consumer engagement in health systems, the integration of health services across the continuum of care, access to care in the community, and financial models that drive competition. Improving our understanding of the linkage between health governance and innovation in health systems may heighten awareness of potential enablers and barriers to innovation success.

Directed Innovation of Business Models

OpenAIRE

Stelian Brad; Emilia Brad

2016-01-01

Business model innovation is an important issue to keep business competitive and increase company’s profits. Due to many market attractors, identification of appropriate paths of business model evolution is a painful and risky process. To improve decision’s effectiveness in this process, an architectural construct of analysis and conceptualization for business model innovation that combines directed evolution and blue ocean concepts is proposed in this paper under the name o...

Wind Power in Europe. A Simultaneous Innovation-Diffusion Model

International Nuclear Information System (INIS)

Soederholm, P.; Klaassen, G.

2007-01-01

The purpose of this paper is to provide a quantitative analysis of innovation and diffusion in the European wind power sector. We derive a simultaneous model of wind power innovation and diffusion, which combines a rational choice model of technological diffusion and a learning curve model of dynamic cost reductions. These models are estimated using pooled annual time series data for four European countries (Denmark, Germany, Spain and the United Kingdom) over the time period 1986-2000. The empirical results indicate that reductions in investment costs have been important determinants of increased diffusion of wind power, and these cost reductions can in turn be explained by learning activities and public R and D support. Feed-in tariffs also play an important role in the innovation and diffusion processes. The higher the feed-in price the higher, ceteris paribus, the rate of diffusion, and we present some preliminary empirical support for the notion that the impact on diffusion of a marginal increase in the feed-in tariff will differ depending on the support system used. High feed-in tariffs, though, also have a negative effect on cost reductions as they induce wind generators to choose high-cost sites and provide fewer incentives for cost cuts. This illustrates the importance of designing an efficient wind energy support system, which not only promotes diffusion but also provides continuous incentives for cost-reducing innovations

Designing the design at JPL'S innovation foundary

Science.gov (United States)

Balint, Tibor S.; Freeman, Anthony

2017-08-01

NASA is a dynamic and living organization. Looking at it through the optics of cybernetics, we can describe it as an autopoietic system. It has to sustain itself, and compete successfully to be viable. Its organizational elements have to interact with the broader environment by maintaining and improving its processes that generate the means for future sustainability. It also needs to bring up follow-on generations who are not simply aligning with the status quo, but also improve the system's viability. For government-run programs, organizational, programmatic and project management practices are often rigidly linear. They can be characterized as observed first-order cybernetic systems, where the paradigm is bound by well-established requirements. At the implementation level this does not readily accommodate flexibility and change. To address this, broadening the system's worldview is needed from the strategic level. This corresponds to an observing second-order cybernetic system, where strategic leadership can overwrite the rules of a first-order system. Changing the worldview of an organization can be complex and face much resistance. Still, with the appropriate strategic-level support, it can be achieved by introducing novel languages, new perspectives, and adding new disciplines to existing ones. In effect, this helps to broaden the organizational paradigm, and subsequently influence its mission, impact the culture, and open up its core processes. These changes can be effectively introduced through design conversations in the early formulation stages, when new ideas are conceived. Within NASA's Jet Propulsion Laboratory, early-stage concept developments are performed at a specially formulated environment, called the Innovation Foundry. Within this office, a continuous effort is being made on designing the design processes, which helps to broaden the variety of the option trades. It is achieved by an added focus on conversations and the inclusion of non

Realistic Creativity Training for Innovation Practitioners: The Know-Recognize-React Model

DEFF Research Database (Denmark)

Valgeirsdóttir, Dagný; Onarheim, Balder

2017-01-01

As creativity becomes increasingly recognized as important raw material for innovation, the importance of identifying ways to increase practitioners’ creativity through rigorously designed creativity training programs is highlighted. Therefore we sat out to design a creativity training program sp...... the transdisciplinary study described in this paper. Co-creation was employed as a method to ensure the three layers of focus would be taken into consideration. The result is a program called Creative Awareness Training which is based on the new Know-Recognize-React model.......As creativity becomes increasingly recognized as important raw material for innovation, the importance of identifying ways to increase practitioners’ creativity through rigorously designed creativity training programs is highlighted. Therefore we sat out to design a creativity training program...

Towards a synergic innovation management model: the interplay of market, technology, and management innovations

Directory of Open Access Journals (Sweden)

Leonard Tchuta

2017-03-01

Full Text Available This paper outlines a model of firm innovation management known as the synergic innovation management model. Building on the theory of dynamic capabilities and core competence, the paper suggest three capabilities of firms namely market, technology, management capabilities that drive firms’ innovations. The combination of these three capabilities creates a unique configuration for a firm known as the firm’s core competence that informs the firm's strategic decisions. The synergic innovation management model guides firm in the simultaneous exploration of market, technology, and management innovations required for sustainable business. The paper concludes with limitations of the model and suggestions for further research.

From design education to user-driven innovation and back again

DEFF Research Database (Denmark)

Tollestrup, Christian; Eriksen, Kaare

2012-01-01

Can distilled design methods for non-designers to user-driven innovation inform design education of Industrial Designers? In 2010 a project on employee driven innovation in the Hospital Sector with Aalborg University and Aalborg Hospital provided 35 participants from all over the hospital...... of potentials and problems to systematic ideation. This paper compares the use these methods in the two settings and especially the problem framing is problematic for both employees and students. For each method strengths and weakness in both situations are outlined. Finally it is concluded that the experiment...... of taking the tools made for employee-driven innovation back into the education stage without any change and without the full-facilitated support from the project setting shows that introducing tools without the mind-set is challenging the very value of these tools....

A design thinking framework for healthcare management and innovation.

Science.gov (United States)

Roberts, Jess P; Fisher, Thomas R; Trowbridge, Matthew J; Bent, Christine

2016-03-01

The business community has learned the value of design thinking as a way to innovate in addressing people's needs--and health systems could benefit enormously from doing the same. This paper lays out how design thinking applies to healthcare challenges and how systems might utilize this proven and accessible problem-solving process. We show how design thinking can foster new approaches to complex and persistent healthcare problems through human-centered research, collective and diverse teamwork and rapid prototyping. We introduce the core elements of design thinking for a healthcare audience and show how it can supplement current healthcare management, innovation and practice. Copyright © 2015 Elsevier Inc. All rights reserved.

tkLayout: a Design Tool for Innovative Silicon Tracking Detectors

CERN Document Server

Bianchi, Giovanni

2014-01-01

A new CMS tracker is scheduled to become operational for the LHC Phase 2 upgrade in the early 2020's. tkLayout is a software package developed to create 3d models for the design of the CMS tracker and to evaluate its fundamental performance figures. The new tracker will have to cope with much higher luminosity conditions, resulting in increased track density, harsher radiation exposure and, especially, much higher data acquisition bandwidth, such that equipping the tracker with triggering capabilities is envisaged. The design of an innovative detector involves deciding on an architecture offering the best trade-off among many figures of merit, such as tracking resolution, power dissipation, bandwidth, cost and so on. Quantitatively evaluating these figures of merit as early as possible in the design phase is of capital importance and it is best done with the aid of software models. tkLayout is a flexible modeling tool: new performance estimates and support for different detector geometries can be quickly ad...

Industrial design as an innovative element in engineering education

DEFF Research Database (Denmark)

Schjær-Jacobsen, Hans; Abou-Hayt, Imad; Ashworth, David

2012-01-01

This paper describes how the Copenhagen University College of Engineering (IHK), in our continuing effort to innovate the engineering study programs, have introduced strong industrial design elements in the 210 ECTS Bachelor of Mechanical Engineering program as well as the 30 ECTS International...... Design Semester and the 10 ECTS Summer School in International Design and Development. The paper describes how implementation of novel industrial design subject areas requires the creation of new laboratory and workshop facilities in order to combine traditional engineering design disciplines...... with creative design as a driver of innovation. With a practical and problem based learning approach at IHK the students are asked to work closely together with companies to come up with engineering solutions that are sustainable from both an engineering and a design perspective....

Strategic collaboration on business model innovation

DEFF Research Database (Denmark)

Gjerding, Allan Næs; Kringelum, Louise Tina Brøns

The present paper focuses on collaboration as a source of hybridization of the market in the case of business model innovation. The basic argument is that while hybridization economizes on transaction costs, it also gives rise to transaction costs. In effect, transaction costs appears...... as a dialectical phenomenon. The argument is illustrated by a narrative of a case of radical business model innovation. The narrative shows how collaborators economize on transaction costs by developing a mutual understanding and shared interpretation of business model innovation, but at the same time gives rise...

Business model innovation: the role of leadership

OpenAIRE

Foss, Nicolai, J.; Saebi, Tina

2015-01-01

We draw on the complementarity literature in economics and management research to dimensionalize business models innovations. Specifically, such innovation can be dimensionalized in terms of the depth and the breadth of the changes to the company’s business model that they imply. In turn, different business model innovations are associated with different management challenges and require different leadership interventions to become successful.

Panacea or diagnosis? Imaginaries of innovation and the 'MIT model' in three political cultures.

Science.gov (United States)

Pfotenhauer, Sebastian; Jasanoff, Sheila

2017-12-01

Innovation studies continue to struggle with an apparent disconnect between innovation's supposedly universal dynamics and a sense that policy frameworks and associated instruments of innovation are often ineffectual or even harmful when transported across regions or countries. Using a cross-country comparative analysis of three implementations of the 'MIT model' of innovation in the UK, Portugal and Singapore, we show how key features in the design, implementation and performance of the model cannot be explained as mere variations on an identical solution to the same underlying problem. We draw on the concept of sociotechnical imaginaries to show how implementations of the 'same' innovation model - and with it the notion of 'innovation' itself - are co-produced with locally specific diagnoses of a societal deficiency and equally specific understandings of acceptable remedies. Our analysis thus flips the conventional notion of 'best-practice transfer' on its head: Instead of asking 'how well' an innovation model has been implemented, we analyze the differences among the three importations to reveal the idiosyncratic ways in which each country imagines the purpose of innovation. We replace the notion of innovation as a 'panacea' - a universal fix for all social woes - with that of innovation-as-diagnosis in which a particular 'cure' is 'prescribed' for a 'diagnosed' societal 'pathology,' which may in turn trigger 'reactions' within the receiving body. This approach offers new possibilities for theorizing how and where culture matters in innovation policy. It suggests that the 'successes' and 'failures' of innovation models are not a matter of how well societies are able to implement a sound, universal model, but more about how effectively they articulate their imaginaries of innovation and tailor their strategies accordingly.

An experiential approach for innovation

DEFF Research Database (Denmark)

Jensen, Jesper Legaard

2012-01-01

This paper explores innovation in relation to product design, with an emphasis on designing for experiences. In the paper I introduce an experiential model called the “Peel model”, and showcase how it can be applied as a tool for innovation. The Peel model depicts different layers of a product......, and transferred that concept to other product types, generating ideas about how a lamp, for instance, could provide a similar experience. The introduced Peel model is intended to be beneficial at an operational level for designers, project managers, business executives etc. as a tool to guide the innovation...

Complexity in Design-Driven Innovation: A Case Study of Knowledge Transfer Flow in Subsea Seismic Sensor Technology and Design Education

Science.gov (United States)

Pavel, Nenad; Berg, Arild

2015-01-01

To the extent previously claimed, concept exploration is not the key to product innovation. However, companies that are design-focused are twice as innovative as those that are not. To study design-driven innovation and its occurrence in design education, two case studies are conducted. The first is an example of design practice which includes…

Designers initiating open innovation with multi-stakeholder through co-reflection sessions

NARCIS (Netherlands)

Tomico Plasencia, O.; Lu, Y.; Baha, S.E.; Lehto, P.; Hivikoski, T.; Roozenburg, N.F.M.; Chen, L.; Stappers, P.J.

2011-01-01

This paper explores a designerly approach to open innovation initiation as start of the PhD research of the third author. More specifically, it presents the application of co-reflection sessions by designers in a healthcare open innovation project to initiate multi-stakeholder participation.

Development of risk benefit structural design method for innovative reactor plants

International Nuclear Information System (INIS)

Yoshio Kamishima; Tai Asayama; Yukio Takahashi; Masanori Tashimo; Hideo Machida; Yomomi Otani; Yasuharu Chuman

2005-01-01

The development of innovative nuclear plants where the energy in the future is carried out in Japan. The design method based on a risk benefit of having maintained mitigation of a risk and the improvement in economy is called for, in order to realize the national innovative nuclear plants. Main key technologies of the risk benefit structural design method are crack propagation evaluation technology and structural reliability evaluation technology. This research aims at pulling up these two technologies on an engineering practical use level. In this paper, requirements from the design of typical innovative nuclear plants and research plan are shown.(authors)

DESIGNING AN INTEGRATED OPEN INNOVATION SYSTEM: TOWARDS ORGANIZATIONAL WHOLENESS

DEFF Research Database (Denmark)

Baka, Vasiliki

2014-01-01

sociotechnical arrangement within the paradigm of open innovation. We explore how effectively technological platforms address emergent collaboration and innovation practices within and across organizations and to which extent existing technologies act as strategic catalysts of open innovation. We argue...... that in embracing wholeness and in treating technologies as inseparable constitutive parts of organizational architecture, we foster organizational and institutional collaboration and encourage innovative practices. The focus of the paper is on how the design of sociotechnical systems as wholes, that is systems...... that are concurrently acting as corporate websites, internal collaboration spaces, extranets and social media aggregators, actively promotes open innovation in practice. We close with a presentation of six cases that are illustrative of how such a system could be applicable within the open innovation paradigm, namely...

tkLayout: a design tool for innovative silicon tracking detectors

Science.gov (United States)

Bianchi, G.

2014-03-01

A new CMS tracker is scheduled to become operational for the LHC Phase 2 upgrade in the early 2020's. tkLayout is a software package developed to create 3d models for the design of the CMS tracker and to evaluate its fundamental performance figures. The new tracker will have to cope with much higher luminosity conditions, resulting in increased track density, harsher radiation exposure and, especially, much higher data acquisition bandwidth, such that equipping the tracker with triggering capabilities is envisaged. The design of an innovative detector involves deciding on an architecture offering the best trade-off among many figures of merit, such as tracking resolution, power dissipation, bandwidth, cost and so on. Quantitatively evaluating these figures of merit as early as possible in the design phase is of capital importance and it is best done with the aid of software models. tkLayout is a flexible modeling tool: new performance estimates and support for different detector geometries can be quickly added, thanks to its modular structure. Besides, the software executes very quickly (about two minutes), so that many possible architectural variations can be rapidly modeled and compared, to help in the choice of a viable detector layout and then to optimize it. A tracker geometry is generated from simple configuration files, defining the module types, layout and materials. Support structures are automatically added and services routed to provide a realistic tracker description. The tracker geometries thus generated can be exported to the standard CMS simulation framework (CMSSW) for full Monte Carlo studies. tkLayout has proven essential in giving guidance to CMS in studying different detector layouts and exploring the feasibility of innovative solutions for tracking detectors, in terms of design, performance and projected costs. This tool has been one of the keys to making important design decisions for over five years now and has also enabled project engineers

Collaboration by design - on the use of value modeling in social innovation projects

NARCIS (Netherlands)

Weigand, H.

2012-01-01

Nowadays, many innovation projects are based on the collaboration of multiple parties to cocreate value. Unfortunately, the collaboration is not always without problems, not the least when financial and legal concerns come into the picture. Value modeling approaches such as e3-value have proven to

Marketing communications model for innovation networks

Directory of Open Access Journals (Sweden)

Tiago João Freitas Correia

2015-10-01

Full Text Available Innovation is an increasingly relevant concept for the success of any organization, but it also represents a set of internal and external considerations, barriers and challenges to overcome. Along the concept of innovation, new paradigms emerge such as open innovation and co-creation that are simultaneously innovation modifiers and intensifiers in organizations, promoting organizational openness and stakeholder integration within the value creation process. Innovation networks composed by a multiplicity of agents in co-creative work perform as innovation mechanisms to face the increasingly complexity of products, services and markets. Technology, especially the Internet, is an enabler of all process among organizations supported by co-creative platforms for innovation. The definition of marketing communication strategies that promote motivation and involvement of all stakeholders in synergic creation and external promotion is the central aspect of this research. The implementation of the projects is performed by participative workshops with stakeholders from Madan Parque through IDEAS(REVOLUTION methodology and the operational model LinkUp parameterized for the project. The project is divided into the first part, the theoretical framework, and the second part where a model is developed for the marketing communication strategies that appeal to the Madan Parque case study. Keywords: Marketing Communication; Open Innovation, Technology; Innovation Networks; Incubator; Co-Creation.

Open innovation: A preliminary model from the Knowledge-based Theory

Directory of Open Access Journals (Sweden)

Rocío González-Sánchez

2011-04-01

Full Text Available Purpose: The open innovation paradigm is an alternative and/or complementary way to knowledge management processes in its various stages, questioning the basic assumptions where some of the technological innovation strategies and processes are based on. The new logic of innovation process exploits knowledge dissemination through new innovation communities, on the one hand, and, considers of strategic value the external access to intangible resources. Thus, this approach supposes an alternative view to the traditional close innovation, focused on the exclusive exploitation of value innovations. This paper aims to contribute to building an integrated model of key factors to success in open innovation processes. It is analyzed for the role that certain key knowledge management decisions have on the results of open innovation projects, to facilitate the change process and provide new capacity or skills to do so. Design/methodology/approach: Through the review of theoretical and empirical literature, we show the main variables related to the functioning of open innovation systems, and establish various propositions about the meaning and intensity of such relationships.Findings: The management of open innovation project improves through three external factors: technical leadership based on experience, the intensive use of ICT, which allows a multilateral communication, and the existence of intermediate agents or facilitators with a strong neutral attitude. The results also depend on internal factors: the link function, the search routines, the establishment of incentive systems to encourage proactivity and organizational culture.Originality/value: In the absence of full proposals to guide effective decision making on both the management of relationships between organizations, as well as factors inherent to each of them, this paper proposes an exploratory model that integrates the key success factors in open innovation processes.

ECONOMIC AND MATHEMATICAL MODELING INNOVATION SYSTEMS

Directory of Open Access Journals (Sweden)

D.V. Makarov

2014-06-01

Full Text Available The paper presents one of the mathematical tools for modeling innovation processes. With the help of Kondratieff long waves can define innovation cycles. However, complexity of the innovation system implies a qualitative description. The article describes the problems of this area of research.

Analysis of an innovative business model

OpenAIRE

Picquendaele, Laetitia

2016-01-01

This master thesis will investigate the freemium business model, raising on the questions: “Why is the freemium business model innovative and what are its success factors?” The aim is to analyse this business model by confronting theory and practice. Therefore, the document begins with a description discussion of the freemium business model. The literature review concludes by determining the success factors of the business model innovation and of the freemium model. The theory in this first p...

Innovative product design based on comprehensive customer requirements of different cognitive levels.

Science.gov (United States)

Li, Xiaolong; Zhao, Wu; Zheng, Yake; Wang, Rui; Wang, Chen

2014-01-01

To improve customer satisfaction in innovative product design, a topology structure of customer requirements is established and an innovative product approach is proposed. The topology structure provides designers with reasonable guidance to capture the customer requirements comprehensively. With the aid of analytic hierarchy process (AHP), the importance of the customer requirements is evaluated. Quality function deployment (QFD) is used to translate customer requirements into product and process design demands and pick out the technical requirements which need urgent improvement. In this way, the product is developed in a more targeted way to satisfy the customers. the theory of innovative problems solving (TRIZ) is used to help designers to produce innovative solutions. Finally, a case study of automobile steering system is used to illustrate the application of the proposed approach.

Innovative Product Design Based on Comprehensive Customer Requirements of Different Cognitive Levels

Directory of Open Access Journals (Sweden)

Xiaolong Li

2014-01-01

Full Text Available To improve customer satisfaction in innovative product design, a topology structure of customer requirements is established and an innovative product approach is proposed. The topology structure provides designers with reasonable guidance to capture the customer requirements comprehensively. With the aid of analytic hierarchy process (AHP, the importance of the customer requirements is evaluated. Quality function deployment (QFD is used to translate customer requirements into product and process design demands and pick out the technical requirements which need urgent improvement. In this way, the product is developed in a more targeted way to satisfy the customers. the theory of innovative problems solving (TRIZ is used to help designers to produce innovative solutions. Finally, a case study of automobile steering system is used to illustrate the application of the proposed approach.

Eco-innovation: The opportunities for engineering design research

DEFF Research Database (Denmark)

O'Hare, Jamie Alexander; McAloone, Tim C.

2014-01-01

Eco-innovation is an approach that has the potential to deliver step change improvements in the environmental performance of products, but the uptake by industry to date has been disappointing. The paper presents a selective review of the academic literature, choosing examples of research that gi...... a flavour of the key trends and interesting topics that are emerging from the eco-innovation body of knowledge. We conclude by suggesting 10 areas where we see potential for the engineering design research community to contribute to the advancement of eco-innovation.......Eco-innovation is an approach that has the potential to deliver step change improvements in the environmental performance of products, but the uptake by industry to date has been disappointing. The paper presents a selective review of the academic literature, choosing examples of research that give...

CO_2 capture with solid sorbent: CFD model of an innovative reactor concept

International Nuclear Information System (INIS)

Barelli, L.; Bidini, G.; Gallorini, F.

2016-01-01

Highlights: • A new reactor solution based on rotating fixed beds was presented. • The preliminary design of the reactor was approached. • A CFD model of the reactor, including CO_2 capture kinetic, was developed. • The CFD model is validated with experimental results. • Sorbent exploitation increasing is possible thanks to the new reactor. - Abstract: In future decarbonization scenarios, CCS with particular reference to post-combustion technologies will be an important option also for energy intensive industries. Nevertheless, today CCS systems are rarely installed due to high energy and cost penalties of current technology based on chemical scrubbing with amine solvent. Therefore, innovative solutions based on new/optimized solvents, sorbents, membranes and new process designs, are R&D priorities. Regarding the CO_2 capture through solid sorbents, a new reactor solution based on rotating fixed beds is presented in this paper. In order to design the innovative system, a suitable CFD model was developed considering also the kinetic capture process. The model was validated with experimental results obtained by the authors in previous research activities, showing a potential reduction of energy penalties respect to current technologies. In the future, the model will be used to identify the control logic of the innovative reactor in order to verify improvements in terms of sorbent exploitation and reduction of system energy consumption.

Design and modelling of an innovative three-stage thermal storage system for direct steam generation CSP plants

Science.gov (United States)

Garcia, Pierre; Vuillerme, Valéry; Olcese, Marco; El Mourchid, Nadim

2016-05-01

Thermal Energy Storage systems (TES) for a Direct Steam Generation (DSG) solar plant feature preferably three stages in series including a latent heat storage module so that steam can be recovered with a limited temperature loss. The storage system designed within the Alsolen Sup project is characterized by an innovative combination of sensible and latent modules. A dynamic model of this three-stage storage has been developed and applied to size the storage system of the Alsolen Sup® plant demonstrator at CEA Cadarache. Results of this simulation show that this promising concept is an efficient way to store heat in DSG solar plants.

Innovative Sustainable Water Management Practices in Solar Residential Design

Directory of Open Access Journals (Sweden)

C. Jason Mabry

2012-11-01

Full Text Available This paper communicates the results of an architectural research project which sought innovative design strategies for achieving energy and resource efficiencies in water management systems traditionally used in single-family housing. It describes the engineering of an efficient, multifaceted, and fully integrated water management system for a domesticenvironment of 800 sq. ft., entirely powered by solar energy. The four innovations whose details are conveyed include the use of alternate materials for piping distribution and collection, the use of water in solar energy generation, the design of a building skin which capitalizes on water’s capacity to store heat as well as the design of a ecological groundscape which re-usesand filters waste water and rain water.Keywords: energy, plumbing, home design

Designing innovative education formats and how to fail well when doing so

DEFF Research Database (Denmark)

Petersen, Anne Kristine; Gundersen, Peter Bukovica

In this article we explore the challenges of designing new, radical education formats from a design-­based research perspective. The article opens with a discussion of central challenges in organisational innovation with particular emphasis on innovation in educational institutions prompted by new...... education reforms. The different roles and functions assumed by the design researcher are also discussed, and it is argued that the role of the project manager should be reconsidered as exceedingly crucial in successful implementation of reform-driven educational innovation. The article draws on empirical...... findings from a recent reform-­driven innovation in the form of a MOOC (Massive Open Online Course), which offers courses to Danish primary and lower­-secondary school teachers in need of further training. The findings discussed in the article indicate that radical education innovations may be adversely...

Methods for open innovation on a genome-design platform associating scientific, commercial, and educational communities in synthetic biology.

Science.gov (United States)

Toyoda, Tetsuro

2011-01-01

Synthetic biology requires both engineering efficiency and compliance with safety guidelines and ethics. Focusing on the rational construction of biological systems based on engineering principles, synthetic biology depends on a genome-design platform to explore the combinations of multiple biological components or BIO bricks for quickly producing innovative devices. This chapter explains the differences among various platform models and details a methodology for promoting open innovation within the scope of the statutory exemption of patent laws. The detailed platform adopts a centralized evaluation model (CEM), computer-aided design (CAD) bricks, and a freemium model. It is also important for the platform to support the legal aspects of copyrights as well as patent and safety guidelines because intellectual work including DNA sequences designed rationally by human intelligence is basically copyrightable. An informational platform with high traceability, transparency, auditability, and security is required for copyright proof, safety compliance, and incentive management for open innovation in synthetic biology. GenoCon, which we have organized and explained here, is a competition-styled, open-innovation method involving worldwide participants from scientific, commercial, and educational communities that aims to improve the designs of genomic sequences that confer a desired function on an organism. Using only a Web browser, a participating contributor proposes a design expressed with CAD bricks that generate a relevant DNA sequence, which is then experimentally and intensively evaluated by the GenoCon organizers. The CAD bricks that comprise programs and databases as a Semantic Web are developed, executed, shared, reused, and well stocked on the secure Semantic Web platform called the Scientists' Networking System or SciNetS/SciNeS, based on which a CEM research center for synthetic biology and open innovation should be established. Copyright © 2011 Elsevier Inc

A model for 'reverse innovation' in health care.

Science.gov (United States)

Depasse, Jacqueline W; Lee, Patrick T

2013-08-30

'Reverse innovation,' a principle well established in the business world, describes the flow of ideas from emerging to more developed economies. There is strong and growing interest in applying this concept to health care, yet there is currently no framework for describing the stages of reverse innovation or identifying opportunities to accelerate the development process. This paper combines the business concept of reverse innovation with diffusion of innovation theory to propose a model for reverse innovation as a way to innovate in health care. Our model includes the following steps: (1) identifying a problem common to lower- and higher-income countries; (2) innovation and spread in the low-income country (LIC); (3) crossover to the higher-income country (HIC); and (4) innovation and spread in the HIC. The crucial populations in this pathway, drawing from diffusion of innovation theory, are LIC innovators, LIC early adopters, and HIC innovators. We illustrate the model with three examples of current reverse innovations. We then propose four sets of specific actions that forward-looking policymakers, entrepreneurs, health system leaders, and researchers may take to accelerate the movement of promising solutions through the reverse innovation pipeline: (1) identify high-priority problems shared by HICs and LICs; (2) create slack for change, especially for LIC innovators, LIC early adopters, and HIC innovators; (3) create spannable social distances between LIC early adopters and HIC innovators; and (4) measure reverse innovation activity globally.

Business Models for Corporate Innovation Management

DEFF Research Database (Denmark)

Brem, Alexander; Trapp, Martin; Voigt, Kai-Ingo

2018-01-01

or a specific product innovation. From a body of extant literature, we develop a BMI identification tool which is then tested by senior managers from four large European corporations to assess whether innovation efforts represent BMI. The tool operationalises BMI and offers straightforward criteria......Business model innovation (BMI) is the process of integrating a new logic of doing business into an established firm to improve profitability or to capitalise on new business opportunities. However, existing research offers only limited clarity on BMI compared to business model upgrades...

Design Capitalism: Design, Economics and Innovation in the Auto-Industrial Age

Directory of Open Access Journals (Sweden)

Peter Murphy

Full Text Available Automation is replacing white-collar office work and non-dexterous manual work, causing major structural change in the job market. As advanced economies shift from a post-industrial to an auto-industrial model, all kinds of routine work is being replaced by machines. Mid-range job opportunities are shrinking, and labor markets are polarizing. Demand for dexterous service work nevertheless remains strong, as does demand for abstract labor working with patterns rather than with rules or procedures. Design is a mid-tier occupation that is growing rather than declining. “Design” is also a metaphor for abstract labor of all kinds; it exemplifies work that is creative, innovative, problem-solving, and reliant on judgment rather than rules. Heightened demand for abstract labor reflects the evolving nature of capitalist economies. The contribution of invention, ingenuity and imagination to the creation of economic value continues to expand. The auto-industrial era is coeval with design capitalism; together they represent a key dimension of future economics.

Impacts of reactivity feedback uncertainties on inherent shutdown in innovative designs

International Nuclear Information System (INIS)

Mueller, C.J.

1986-01-01

The concept of inherent shutdown is emphasized in the approach to the design of innovative, small pool-type liquid-metal reactors (LMRs). This paper reports an evaluation of reactivity feedback uncertainties used in the analyses of anticipated transients without scram for innovative LMRs, and the associated impacts on safety margins and inherent shutdown success probabilities on unprotected loss-of-flow (LOF) events. It then assesses the ultimate importance of these uncertainties on LOF and transient overpower events in evolving metal and oxide innovative designs

Impacts of reactivity feedback uncertainties on inherent shutdown in innovative designs

International Nuclear Information System (INIS)

Mueller, C.J.

1986-01-01

The concept of ''inherent shutdown'' is emphasized in the approach to the design of innovative, small pool-type liquid metal reactors (LMRs). This paper reports an evaluation of reactivity feedback uncertainties used in the analyses of anticipated transients without scram (ATWS) for innovative LMRs, and the associated impacts on safety margins and inherent shutdown success probabilities on unprotected loss-of-flow (LOF) events. It then assesses the ultimate importance of these uncertainties on LOF and transient overpower (TOP) events in evolving metal and oxide innovative designs

Design and analysis of information model hotel complex

Directory of Open Access Journals (Sweden)

Garyaev Nikolai

2016-01-01

Full Text Available The article analyzes the innovation in 3D modeling and development of process design approaches based on visualization of information technology and computer-aided design systems. The problems arising in the modern design and the approach to address them.

An innovation resistance factor model

Directory of Open Access Journals (Sweden)

Siti Salwa Mohd Ishak

2016-09-01

Full Text Available The process and implementation strategy of information technology in construction is generally considered through the limiting prism of theoretical contexts generated from innovation diffusion and acceptance. This research argues that more attention should be given to understanding the positive effects of resistance. The study develops a theoretical framing for the Integrated Resistance Factor Model (IRFM. The framing uses a combination of diffusion of innovation theory, technology acceptance model and social network perspective. The model is tested to identify the most significant resistance factors using Partial Least Square (PLS technique. All constructs proposed in the model are found to be significant, valid and consistent with the theoretical framework. IRFM is shown to be an effective and appropriate model of user resistance factors. The most critical factors to influence technology resistance in the online project information management system (OPIMS context are: support from leaders and peers, complexity of the technology, compatibility with key work practices; and pre-trial of the technology before it is actually deployed. The study provides a new model for further research in technology innovation specific to the construction industry.

Business Models and Business Model Innovation

DEFF Research Database (Denmark)

Foss, Nicolai J.; Saebi, Tina

2018-01-01

While research on business models and business model innovation continue to exhibit growth, the field is still, even after more than two decades of research, characterized by a striking lack of cumulative theorizing and an opportunistic borrowing of more or less related ideas from neighbouring...

Selection and development of innovative design alternatives : Ethical, social and uncertainty issues

NARCIS (Netherlands)

Jacobs, J.F.

2015-01-01

Innovative engineering design shapes the development of novel technologies and is ethically as well as socially relevant, because it affects what kind of possibilities and consequences will arise. A major challenge in engineering design work on innovative technologies is the multitude of

Proposal of a Modelling of the Innovation Process in an International Manufacturing Company

Directory of Open Access Journals (Sweden)

Pauline Lacom

2017-07-01

Full Text Available Nowadays, to cope with the competition, and to ensure the durability of their activities, companies have to be able to innovate. Manufacturing companies operating in a B2B market often perceive innovation as a technological result. However, innovation is often more characterized as a process. The needs of the users, and not only the technology, can achieve innovation. In this context, our paper intends to determine how to involve better the users in the innovation process of an international manufacturing company, which is, according to us, representative of the current manufacturing companies. The aim of our research paper is to help manufacturing companies to manage innovation led by users, and to implement their innovation process so that they will be able to set up specific tools for each action of the process. The study proposes a diagram-based language Structured Analysis and Design Technique (SADT that is based on the normative guide FD X50-271 of the French national organization for standardization (AFNOR. The SADT model we propose usefully complements this guide, to make the innovation process more understandable, practical and operational, for manufacturing companies, which are often helpless when faced with the subject. A critical analysis of the model we propose completed in a manufacturing company through semi-structured interviews of the innovation team and questionnaire for all the employees shows the application of the model in the company.

Balancing intuition and rationality for improving innovation decision-making : The role of design consultancies

NARCIS (Netherlands)

Calabretta, G.; Gemser, G.; Wijnberg, N.M.; Hekkert, P.P.M.

2013-01-01

To contain risks and increase the profitability of innovation efforts, firms frequently engage in joint innovation activities with external sources of knowledge, like design consultancies. Innovation literature has given limited consideration to the strategic role that design consultancies can play

Towards controlled innovation of complex objects.: A sociotechnical approach to describing ship design

OpenAIRE

van Bruinessen, T.M.

2016-01-01

Within the ship design industry, and in particular in the development of large, complex and innovative vessels experienced ship designers play an important role in organizing and structuring the design process. How this actually happens within projects that develop such large, complex and innovative vessels for a single client is not clear. This observation lead to a broad, initial research question as the starting point for further research. How are innovative, large and complex vessels deve...

Frugal Innovation and Green Business Models

DEFF Research Database (Denmark)

Andersen, Maj Munch

2015-01-01

The literature on ‘green business models’ is rapidly developing these years. This paper suggests that much existing work on green business models lacks a deeper theoretical understanding of eco-innovation and the green economy. The paper forwards an evolutionary economic perspective on green...... business models. This perspective departs in important ways from other approaches to green business models the implications of which are sought clarified and discussed in the paper. The paper argues for the need to link up green business model innovation to aggregate green economic change. The paper posits...... that the greening of the economy has reached such a stage of maturity where a generic ‘green business model’ is apparent. The paper points to eight characteristics of eco-innovation on the basis of which key changes to the business model are identified and schematised for the different stages of the green economic...

Modeling Languages Refine Vehicle Design

Science.gov (United States)

2009-01-01

Cincinnati, Ohio s TechnoSoft Inc. is a leading provider of object-oriented modeling and simulation technology used for commercial and defense applications. With funding from Small Business Innovation Research (SBIR) contracts issued by Langley Research Center, the company continued development on its adaptive modeling language, or AML, originally created for the U.S. Air Force. TechnoSoft then created what is now known as its Integrated Design and Engineering Analysis Environment, or IDEA, which can be used to design a variety of vehicles and machinery. IDEA's customers include clients in green industries, such as designers for power plant exhaust filtration systems and wind turbines.

Conceptual model innovation management: market orientation

Directory of Open Access Journals (Sweden)

L.Ya. Maljuta

2015-06-01

Full Text Available The article highlights issues that determine the beginning of the innovation process. Determined that until recently in Ukraine at all levels of innovation management (regional, sectoral, institutional dominated grocery orientation innovation that focus on production innovation and found that the transition to a market economy, the restructuring of production and complexity of social needs led to the strengthening of the consumer. It is proved that innovation itself – not the ultimate goal, but only a means of satisfying consumer needs. It proved that changing production conditions, complications of social needs and the need to improve the competitiveness of innovations require finding new forms of innovation. In this regard, proposed to allocate such basic scheme (model of innovation in small businesses, individual entrepreneurs, venture capital firms, eksplerents, patients, violents and commutants, spin-offs and spin-out company, network (or shell company and a network of small businesses.

Leveraging Resistance to Change and the Skunk Works Model of Innovation

DEFF Research Database (Denmark)

Fosfuri, Andrea; Rønde, Thomas

We study a situation in which an R&D department promotes the introduction of an innovation that results in costly re-adjustments for a production department. In response, the production department tries to resist change by improving the existing technology. We show that firms balancing...... the strengths of the two departments perform better. As a negative effect, resistance to change might distort the R&D department's effort away from radical innovations. The firm can solve this problem by implementing the so-called skunk works model of innovation where the R&D department is isolated from...... the rest of the organization. Several implications for managing resistance to change and for the optimal design of R&D activities are derived...

Participatory Communication Referred to Meta-Design Approach through the FleXpeaker™ Application of Innovative Material in Exhibition Design

Directory of Open Access Journals (Sweden)

Pei-Hsuan Su

2016-07-01

Full Text Available Modelling a communication system in material culture today always involves with objects, people, organizations, activities and interrelationships among them. The researcher suggests bringing together stakeholders engaged to exchange ideas, which the interactions relate to multiple professions and disciplines in a participatory scope of communication system. Owing to the invention of digital media, the status quo of images and sounds has revolutionized and caused changes of the mode of art exhibitions that produce activities and aesthetic concepts in terms of numerical representation, modularity, automation, visual variability and transcoding. Underlying a participatory-design approach, the research emphasizes a co-creative meta-interpretation of museum‟s visitors. In addition, the research delves further into the use of new media-FleXpeaker™ [ITRI], as the carrier. Combining art and design with innovative technology, the research focuses on examining design objects and innovative material which are applied in new media art and exhibition, in the hope to find new angles of participatory interpretation of the “integrated innovation” in curating an exhibition.

Lessons for Co-Innovation in Agricultural Innovation Systems: A Multiple Case Study Analysis and a Conceptual Model

Science.gov (United States)

Fielke, Simon J.; Botha, Neels; Reid, Janet; Gray, David; Blackett, Paula; Park, Nicola; Williams, Tracy

2018-01-01

Purpose: This paper highlights important lessons for co-innovation drawn from three ex-post case study innovation projects implemented within three sub-sectors of the primary industry sector in New Zealand. Design/methodology/approach: The characteristics that fostered co-innovation in each innovation project case study were identified from…

Business model innovation vs. business model inertia: The role of disruptive technologies

OpenAIRE

Vorbach, Stefan; Wipfler, Harald; Schimpf, Sven

2017-01-01

This contribution addresses the impact of disruptive technologies on business model innovation. While such technologies have the potential to significantly alter the way in which businesses operate, business model inertia hinders companies from adopting the new technological possibilities. Little research has focused on the difficulties incumbents face when innovating their business models. By reviewing current literature on business model innovation, this paper summarizes challenges companie...

Book review. Design for Care: Innovating Healthcare Experience

Directory of Open Access Journals (Sweden)

Manuela Aguirre Ulloa

2014-12-01

Full Text Available Adapted from a review on the same book published by The Design Observer Group on April 4th, 2014. You can access the original publication online at http://designobserver.com/feature/design-for-care/38382/ Peter Jones´ recently published book represents a timely and comprehensive view of the value design brings to healthcare innovation. The book uses an empathic user story that conveys emotions and life to a structure that embraces the different meanings of Design for Care: Spanning from caring at the personal level to large-scale caring systems. The author has a main objective for each of its three main target audiences: Designers, companies and healthcare teams. Firstly, it allows designers to understand healthcare in a holistic and patient-centered way, breaking down specialized silos. Secondly, it shows how to design better care experiences across care continuums. Consequently, for companies serving the healthcare sector, the book presents how to humanize information technology (IT and services and meet the needs of health seekers. Finally, the book aims to inform healthcare teams (clinical practitioners and administrators the value design brings in research, co-creation and implementation of user and organizational experiences. It also proposes that healthcare teams learn and adopt design and systems thinking techniques so their innovation processes can be more participatory, holistic and user-centered.

Trends and new business models in the portuguese fashion industry: a strategic innovation perspective

OpenAIRE

Queirós, David; Afonso, Paulo; Vieira, Filipa Dionísio

2013-01-01

This research project focuses on the discussion of trends and new business models for the textile and clothing industry in general and for the fashion industry, in particular, using tools and an approach supported on strategic innovation. A documentary analysis was performed and they were conducted a series of semi-structured interviews. It was noted the importance of the strategic analysis and particularly strategic innovation for the design of new successful business models. Main findings a...

The Journey of Business Model Innovation in Media Agencies

DEFF Research Database (Denmark)

Jensen, Henrik; Sund, Kristian J.

models. We find evidence for the existence of three separate stages in this innovation process, which we call business model innovation awareness, business model exploration, and business model exploitation. We furthermore find and document how different building blocks act, and interact as enablers...... or facilitators of innovation in each stage of the business model innovation process....... chain. Based on secondary data and in-depth interviews with 11 Danish media agency CEOs, and using the nine building blocks suggested in the business model canvas framework of Osterwalder and Pigneur (2010), we develop a grounded process model describing how these agencies have altered their business...

Selection and development of innovative design alternatives: Ethical, social and uncertainty issues

OpenAIRE

Jacobs, J.F.

2015-01-01

Innovative engineering design shapes the development of novel technologies and is ethically as well as socially relevant, because it affects what kind of possibilities and consequences will arise. A major challenge in engineering design work on innovative technologies is the multitude of uncertainties in the form of known unknowns, unknown unknowns, complexities, and ambiguities. The evaluation and generation of design concepts are general and essential parts of the design process in which va...

Model-based design languages: A case study

OpenAIRE

Cibrario Bertolotti, Ivan; Hu, Tingting; Navet, Nicolas

2017-01-01

Fast-paced innovation in the embedded systems domain puts an ever increasing pressure on effective software development methods, leading to the growing popularity of Model-Based Design (MBD). In this context, a proper choice of modeling languages and related tools - depending on design goals and problem qualities - is crucial to make the most of MBD benefits. In this paper, a comparison between two dissimilar approaches to modeling is carried out, with the goal of highlighting their relative ...

Continuous business model innovation in the Danish newspaper industry

DEFF Research Database (Denmark)

Holm, Anna B.; Günzel, Franziska

Business model innovation is undoubtedly of strategic importance in innovation management. However, little is known on how in fact how companies experiment and innovate with regards to their business models. To shed more light on this issue, we have conducted a qualitative study of the newspaper...... industry in Denmark. Business model innovation became imperative for the traditional newspaper publishers after many years of the declining readership and revenues. We collected rich primary and secondary data from various sources during 2010-2012. Our analysis suggests that changing business models in its...... various parts does not guarantee a successful business model change and may even harm the existing well-functioning business model. To innovate a business model successfully, managers need to secure the business logic flow and its feedback loops....

Models and Methods for Structural Topology Optimization with Discrete Design Variables

DEFF Research Database (Denmark)

Stolpe, Mathias

in the conceptual design phase to find innovative designs. The strength of topology optimization is the capability of determining both the optimal shape and the topology of the structure. In some cases also the optimal material properties can be determined. Optimal structural design problems are modeled...... such as bridges, airplanes, wind turbines, cars, etc. Topology optimization is a collection of theory, mathematical models, and numerical methods and is often used in the conceptual design phase to find innovative designs. The strength of topology optimization is the capability of determining both the optimal......Structural topology optimization is a multi-disciplinary research field covering optimal design of load carrying mechanical structures such as bridges, airplanes, wind turbines, cars, etc. Topology optimization is a collection of theory, mathematical models, and numerical methods and is often used...

A new model for graduate education and innovation in medical technology.

Science.gov (United States)

Yazdi, Youseph; Acharya, Soumyadipta

2013-09-01

We describe a new model of graduate education in bioengineering innovation and design- a year long Master's degree program that educates engineers in the process of healthcare technology innovation for both advanced and low-resource global markets. Students are trained in an iterative "Spiral Innovation" approach that ensures early, staged, and repeated examination of all key elements of a successful medical device. This includes clinical immersion based problem identification and assessment (at Johns Hopkins Medicine and abroad), team based concept and business model development, and project planning based on iterative technical and business plan de-risking. The experiential, project based learning process is closely supported by several core courses in business, design, and engineering. Students in the program work on two team based projects, one focused on addressing healthcare needs in advanced markets and a second focused on low-resource settings. The program recently completed its fourth year of existence, and has graduated 61 students, who have continued on to industry or startups (one half), additional graduate education, or medical school (one third), or our own Global Health Innovation Fellowships. Over the 4 years, the program has sponsored 10 global health teams and 14 domestic/advanced market medtech teams, and launched 5 startups, of which 4 are still active. Projects have attracted over US$2.5M in follow-on awards and grants, that are supporting the continued development of over a dozen projects.

On Singularities and Black Holes in Combination-Driven Models of Technological Innovation Networks.

Directory of Open Access Journals (Sweden)

Ricard Solé

Full Text Available It has been suggested that innovations occur mainly by combination: the more inventions accumulate, the higher the probability that new inventions are obtained from previous designs. Additionally, it has been conjectured that the combinatorial nature of innovations naturally leads to a singularity: at some finite time, the number of innovations should diverge. Although these ideas are certainly appealing, no general models have been yet developed to test the conditions under which combinatorial technology should become explosive. Here we present a generalised model of technological evolution that takes into account two major properties: the number of previous technologies needed to create a novel one and how rapidly technology ages. Two different models of combinatorial growth are considered, involving different forms of ageing. When long-range memory is used and thus old inventions are available for novel innovations, singularities can emerge under some conditions with two phases separated by a critical boundary. If the ageing has a characteristic time scale, it is shown that no singularities will be observed. Instead, a "black hole" of old innovations appears and expands in time, making the rate of invention creation slow down into a linear regime.

On Singularities and Black Holes in Combination-Driven Models of Technological Innovation Networks.

Science.gov (United States)

Solé, Ricard; Amor, Daniel R; Valverde, Sergi

2016-01-01

It has been suggested that innovations occur mainly by combination: the more inventions accumulate, the higher the probability that new inventions are obtained from previous designs. Additionally, it has been conjectured that the combinatorial nature of innovations naturally leads to a singularity: at some finite time, the number of innovations should diverge. Although these ideas are certainly appealing, no general models have been yet developed to test the conditions under which combinatorial technology should become explosive. Here we present a generalised model of technological evolution that takes into account two major properties: the number of previous technologies needed to create a novel one and how rapidly technology ages. Two different models of combinatorial growth are considered, involving different forms of ageing. When long-range memory is used and thus old inventions are available for novel innovations, singularities can emerge under some conditions with two phases separated by a critical boundary. If the ageing has a characteristic time scale, it is shown that no singularities will be observed. Instead, a "black hole" of old innovations appears and expands in time, making the rate of invention creation slow down into a linear regime.

FORMATION OF A INNOVATION REGIONAL CLUSTER MODEL

Directory of Open Access Journals (Sweden)

G. S. Merzlikina

2015-01-01

Full Text Available Summary. As a result of investigation of science and methodical approaches related problems of building and development of innovation clusters there were some issues in functional assignments of innovation and production clusters. Because of those issues, article’s authors differ conceptions of innovation cluster and production cluster, as they explain notion of innovation-production cluster. The main goal of this article is to reveal existing organizational issues in cluster building and its successful development. Based on regional clusters building analysis carried out there was typical practical structure of cluster members interaction revealed. This structure also have its cons, as following: absence cluster orientation to marketing environment, lack of members’ prolonged relations’ building and development system, along with ineffective management of information, financial and material streams within cluster, narrow competence difference and responsibility zones between cluster members, lack of transparence of cluster’s action, low environment changes adaptivity, hard to use cluster members’ intellectual property, and commercialization of hi-tech products. When all those issues listed above come together, it reduces life activity of existing models of innovative cluster-building along with practical opportunity of cluster realization. Because of that, authors offer an upgraded innovative-productive cluster building model with more efficient business processes management system, which includes advanced innovative cluster structure, competence matrix and subcluster responsibility zone. Suggested model differs from other ones by using unified innovative product development control center, which also controls production and marketing realization.

Sustainable Business Models through Service Design

NARCIS (Netherlands)

Prendeville, S.M.; Bocken, N.M.P.

2017-01-01

In the face of growing sustainability challenges, pressure on businesses to decouple environmental impacts from growth is mounting. New sustainable business models can be a systemic driver for change in industry and the wider business innovation literature suggests that strategic design approaches

Openness during business model innovation

DEFF Research Database (Denmark)

Holm, Anna B.; Günzel, Franziska; Ulhøi, John Parm

the recent developments in the Danish newspaper industry, especially how the Internet and related technology developments have disrupted the long-standing successful business model of the industry. Our findings suggest that a more nuanced understanding of the term ‘openness’ is needed since the opening......Literature on business model innovation portraits an open business model as a modern and lucrative approach to conducting business, and even as a way to engage in open innovation activities. Using archival data and interviews with key employees of the two largest media groups from Denmark, we show...... of business models during technological dynamics may have far more diverse consequences than it has been reported in the literature so far and can even become a major threat to business viability....

The Opportunities and Challenges of Persuasive Technology in Creating Sustainable Innovation and Business Model Innovation

DEFF Research Database (Denmark)

Aagaard, Annabeth; Lindgren, Peter

2015-01-01

The opportunities of persuasive technology in facilitating sustainable innovation and business model innovation have been witnessed continuously during the last decade. The unique ability of persuasive technology in interacting and mediating across users, customers, decisions makers and other...... stakeholders provides access to core knowledge about behavior and opportunities to influence and even change their behavior in a positive and more sustainable manner. Sustainable innovation and business model innovation is gaining more and more competitive leverage due to customer requirements, the growing...

Innovation design : creating value for people, organizations and society

NARCIS (Netherlands)

Ouden, den P.H.

2012-01-01

Innovation Design presents an approach to designing shared value for businesses, non-profit organizations, end-users and society. The societal and economic challenges we are currently facing - such as the aging population, energy scarcity and environmental issues - are not just threats but are also

Process innovation laboratory

DEFF Research Database (Denmark)

Møller, Charles

2007-01-01

to create a new methodology for developing and exploring process models and applications. The paper outlines the process innovation laboratory as a new approach to BPI. The process innovation laboratory is a comprehensive framework and a collaborative workspace for experimenting with process models....... The process innovation laboratory facilitates innovation by using an integrated action learning approach to process modelling in a controlled environment. The study is based on design science and the paper also discusses the implications to EIS research and practice......Most organizations today are required not only to operate effective business processes but also to allow for changing business conditions at an increasing rate. Today nearly every business relies on their enterprise information systems (EIS) for process integration and future generations of EIS...

Innovation as a transversal Axis in Organizational Business Models

Directory of Open Access Journals (Sweden)

Luis Fernando Landazury Villalba

2017-02-01

Full Text Available In the field of business and administration, innovation has turned to be a differentiating factor in the business models of organizations; for this reason, this article aims at showing a theoretical reflection about innovation in various business models, exploring the relevance of the concepts of management and creation of added value. It was noticed a pertinent concept for innovation and business models from an interpretation perspective, as well as ideas and views which clearly show that these forms of innovation and business models really generate added value.

The Public Health Innovation Model: Merging Private Sector Processes with Public Health Strengths.

Science.gov (United States)

Lister, Cameron; Payne, Hannah; Hanson, Carl L; Barnes, Michael D; Davis, Siena F; Manwaring, Todd

2017-01-01

Public health enjoyed a number of successes over the twentieth century. However, public health agencies have arguably been ill equipped to sustain these successes and address the complex threats we face today, including morbidity and mortality associated with persistent chronic diseases and emerging infectious diseases, in the context of flat funding and new and changing health care legislation. Transformational leaders, who are not afraid of taking risks to develop innovative approaches to combat present-day threats, are needed within public health agencies. We propose the Public Health Innovation Model (PHIM) as a tool for public health leaders who wish to integrate innovation into public health practice. This model merges traditional public health program planning models with innovation principles adapted from the private sector, including design thinking, seeking funding from private sector entities, and more strongly emphasizing program outcomes. We also discuss principles that leaders should consider adopting when transitioning to the PHIM, including cross-collaboration, community buy-in, human-centered assessment, autonomy and creativity, rapid experimentation and prototyping, and accountability to outcomes.

The Public Health Innovation Model: Merging Private Sector Processes with Public Health Strengths

Directory of Open Access Journals (Sweden)

Cameron Lister

2017-08-01

Full Text Available Public health enjoyed a number of successes over the twentieth century. However, public health agencies have arguably been ill equipped to sustain these successes and address the complex threats we face today, including morbidity and mortality associated with persistent chronic diseases and emerging infectious diseases, in the context of flat funding and new and changing health care legislation. Transformational leaders, who are not afraid of taking risks to develop innovative approaches to combat present-day threats, are needed within public health agencies. We propose the Public Health Innovation Model (PHIM as a tool for public health leaders who wish to integrate innovation into public health practice. This model merges traditional public health program planning models with innovation principles adapted from the private sector, including design thinking, seeking funding from private sector entities, and more strongly emphasizing program outcomes. We also discuss principles that leaders should consider adopting when transitioning to the PHIM, including cross-collaboration, community buy-in, human-centered assessment, autonomy and creativity, rapid experimentation and prototyping, and accountability to outcomes.

Options Study Documenting the Fast Reactor Fuels Innovative Design Activity

Energy Technology Data Exchange (ETDEWEB)

Jon Carmack; Kemal Pasamehmetoglu

2010-07-01

This document provides presentation and general analysis of innovative design concepts submitted to the FCRD Advanced Fuels Campaign by nine national laboratory teams as part of the Innovative Transmutation Fuels Concepts Call for Proposals issued on October 15, 2009 (Appendix A). Twenty one whitepapers were received and evaluated by an independent technical review committee.

Design theory methods and organization for innovation

CERN Document Server

Le Masson, Pascal; Hatchuel, Armand

2017-01-01

This textbook presents the core of recent advances in design theory and its implications for design methods and design organization. Providing a unified perspective on different design methods and approaches, from the most classic (systematic design) to the most advanced (C-K theory), it offers a unique and integrated presentation of traditional and contemporary theories in the field. Examining the principles of each theory, this guide utilizes numerous real life industrial applications, with clear links to engineering design, industrial design, management, economics, psychology and creativity. Containing a section of exams with detailed answers, it is useful for courses in design theory, engineering design and advanced innovation management. "Students and professors, practitioners and researchers in diverse disciplines, interested in design, will find in this book a rich and vital source for studying fundamental design methods and tools as well as the most advanced design theories that work in practice". Pro...

Barriers to Business Model Innovation in Swedish Agriculture

Directory of Open Access Journals (Sweden)

Olof Sivertsson

2015-02-01

Full Text Available Swedish agricultural companies, especially small farms, are struggling to be profitable in difficult economic times. It is a challenge for Swedish farmers to compete with imported products on prices. The agricultural industry, however, supports the view that through business model innovation, farms can increase their competitive advantage. This paper identifies and describes some of the barriers Swedish small farms encounter when they consider business model innovation. A qualitative approach is used in the study. Agriculture business consultants were interviewed. In a focus group led by the researchers, farmers discussed business model innovation, including the exogenous and endogenous barriers to such innovation. The paper concludes many barriers exist when farmers consider innovation of agricultural business models. Some barriers are caused by human factors, such as individuals’ attitudes, histories, and traditions. Other barriers are more contextual in nature and relate to a particular industry or company setting. Still other barriers, such as government regulations, value chain position, and weather, are more abstract. All barriers, however, merit attention when Swedish agricultural companies develop new business models.

Creating safer coastal and port infrastructure with innovative physical and numerical modelling

CSIR Research Space (South Africa)

Tulsi, K

2015-10-01

Full Text Available Infrastructure with Innovative Physical and Numerical Modelling Kishan Tulsi  Physical and Numerical modelling  Breakwater Monitoring  Armour track  Vessel manoeuvring simulations for safe port design and operations  Simflex software... – Integrated Port Operations Support System  Virtual Buoy Physical modelling Numerical modelling Armour Track Armour Track Armour Track Armour Track Armour track using 3D data points Ship manoeuvring simulations: Ship Manoeuvring simulations Port...

A Boolean Approach to Airline Business Model Innovation

DEFF Research Database (Denmark)

Hvass, Kristian Anders

Research in business model innovation has identified its significance in creating a sustainable competitive advantage for a firm, yet there are few empirical studies identifying which combination of business model activities lead to success and therefore deserve innovative attention. This study...... analyzes the business models of North America low-cost carriers from 2001 to 2010 using a Boolean minimization algorithm to identify which combinations of business model activities lead to operational profitability. The research aim is threefold: complement airline literature in the realm of business model...... innovation, introduce Boolean minimization methods to the field, and propose alternative business model activities to North American carriers striving for positive operating results....

Using innovative instructional technology to meet training needs in public health: a design process.

Science.gov (United States)

Millery, Mari; Hall, Michelle; Eisman, Joanna; Murrman, Marita

2014-03-01

Technology and distance learning can potentially enhance the efficient and effective delivery of continuing education to the public health workforce. Public Health Training Centers collaborate with instructional technology designers to develop innovative, competency-based online learning experiences that meet pressing training needs and promote best practices. We describe one Public Health Training Center's online learning module design process, which consists of five steps: (1) identify training needs and priority competencies; (2) define learning objectives and identify educational challenges; (3) pose hypotheses and explore innovative, technology-based solutions; (4) develop and deploy the educational experience; and (5) evaluate feedback and outcomes to inform continued cycles of revision and improvement. Examples illustrate the model's application. These steps are discussed within the context of design practices in the fields of education, engineering, and public health. They incorporate key strategies from across these fields, including principles of programmatic design familiar to public health professionals, such as backward design. The instructional technology design process we describe provides a structure for the creativity, collaboration, and systematic strategies needed to develop online learning products that address critical training needs for the public health workforce.

Competing With the Use of Business Model innovation - an Exploratory Case Study of the Journey of Born Global Firms

Directory of Open Access Journals (Sweden)

Marlene Johansson

2014-08-01

Full Text Available Purpose: The purpose of this article is to investigate how business models are used by born global firms to act upon new business opportunities and how they manage business model innovation over time to prosper and grow. Design/Methodology: The study is based on three exploratory case studies of born global firms in mobile communication, financial services and digital music distribution. Findings: Three interrelated capabilities to manage business model innovation are articulated in the context of born global firms; sensing capabilities, entrepreneurial capabilities and relational capabilities and four propositions are formulated. We find that business model innovations are used as a tool by maturing born global firms to navigate the value chains and achieve international growth. We further propose that born global need the capabilities to balance different business model designs simultaneously and to manage its business model innovation in a timely manner. Originality: This article contributes to both the business model literature and research of international entrepreneurship. By putting business model research into the dynamic context of rapidly internationalizing born global firms, we contribute to the field of business model research with findings of how business models are used in the internationalization processes. Certain capabilities are needed to manage business model innovation for born global firms to dynamically use business models as a tool in the international growth overtime.

Innovation by design lessons from post box design & development

CERN Document Server

Chakravarthy, Battula Kalyana

2013-01-01

The book provides an in-depth knowledge on how a product is designed and developed by Product Designers. This has been achieved through a case study of one product – the Post Box. This product was chosen for the study primarily due to its simple and non-technical nature as that would make it easy for the readers to comprehend the design process. At the same time the Post Box posed all the challenges a designer would face while creating a new product. Through a step by step process the book gradually takes the reader through the design and development journey – right from understanding the product, identifying the user need through market research, comprehending client’s brief, generating product ideas and concepts to development of prototype, manufacturing and final performance of the product. The book illustrates the stages in the design process that lead to innovation which is applicable to all types of products. To make the book more stimulating, interesting facts, figures and pictures on related iss...

Designing an idea screening framework for employee-driven innovation

OpenAIRE

Ciriello, Raffaele Fabio; Richter, Alexander; Schwabe, Gerhard

2016-01-01

As ever more companies encourage their employees to realize innovations, a surplus of ideas that exceeds the available resources to implement them has become reality in many organizations. With this paper, we follow recent calls for designing IT-supported, comprehensive, multi-attributive idea screening throughout the whole innovation cycle. Our Idea Screening Framework is grounded in literature and empirical data we collected from a two-year field study in a multinational European banking so...

Designing an AHP methodology to prioritize critical elements for product innovation: an intellectual capital perspective

Directory of Open Access Journals (Sweden)

Costa, R. V.

2015-08-01

Full Text Available Intellectual capital has for the past decades been evidenced as an important source of competitive advantages and differentiation at the firm level. At the same time, innovation has become a critical factor for companies to ensure their sustainability and even their survival in a globalized business landscape. Having in mind these two crucial concepts for business success, this study intends to build on the relationships between intellectual capital and product innovation at the firm level. Specifically, we will design and test a model based on the Analytic Hierarchy Process, whose aim is to allow the prioritization of intellectual capital elements according to their relative importance for product innovation performance at the firm level. The main goal of this research is to build a diagnosis and action tool that helps business managers incorporate an intellectual capital perspective into their product innovation initiatives. This framework will help managers to better understand which intellectual capital elements are more critical to their product innovation efforts, and thereby systematize actions and clarify resource allocation priorities to improve their product innovation capabilities. In order to validate the practicability of this proposal, the methodology was empirically applied to a Portuguese innovative company.

Engaged scholarship for designing product service system innovation opportunities in an industrial design course

NARCIS (Netherlands)

Lu, Y.; Baha, S.E.; Hsieh, P.H.

2013-01-01

This paper explores a design case study in an industrial design classroom in which actors with diverse expertise were involved for the creation of Product Service System (PSS) innovation opportunities in societal contexts. By engaging diverse experts from different fields, the classroom was turned

Engaging Actors in Co-Designing Heterogeneous Innovations

DEFF Research Database (Denmark)

Jørgensen, Ulrik; Lindegaard, Hanne; Rosenqvist, Tanja Schultz

2011-01-01

In this paper we share and analyze our experiences staging a co-design process in which we through different interventions engage important actors in designing. Our experiences are taking from an innovation and research project about user-involvement in textile design processes. As the project...... in our project’s agenda by going through the different stages of translation. The paper is finalized with reflections on the difficulties in engaging actors in a co-design process and transporting results into the existing framed context of design and architectural work....... related to translating and transporting the results of these different events due to the institutional and professional framing of projects and design processes. We are analyzing these through an actor network approach and use the translation term to describe how the participants slowly became engaged...

Job Design and Innovative Work Behavior: One Size Does Not Fit All Types of Employees

Directory of Open Access Journals (Sweden)

Stan De Spiegelaere

2012-01-01

Full Text Available As innovative employees become imperative for an organizations’ success, research identified job design as a crucial variable in promoting innovative work behavior (IWB (Hammond et al., 2011. Using the Job Demands-Resources (JD-R model of Bakker & Demerouti (2007, this article contributes to the literature as it uses recent insights on the distinction between job challenges and job hindrances (Van den Broeck et al., 2010 and distinguishes between blue- and white-collar employees. Using survey data of 893 employees of various organizations the findings generally confirm the JD-R model, although important differences were found between blue-collar and white-collar employees regarding the relation of organizing and routine tasks with IWB. Job content insecurity further was found to be very detrimental for blue-collar IWB. These findings have important HR and political implications as they show that there is no ‘one size fits all’ HR solution for innovation.

BUSINESS MODEL INNOVATION IN NIGERIAN HIGHER EDUCATION INSTITUTIONS

OpenAIRE

Nonso Ochinanwata; Patrick Oseloka Ezepue

2017-01-01

This paper explores business model innovation that aims to innovate the Nigerian higher education sector. A focus group and semi-structured interviews among higher education Nigerian academics, students and graduates are used to explore the new business model for Nigerian higher education. The study found that, to achieve efficient and effective innovation, Nigerian higher education institutions need to collaborate with industry, professionals and other stakeholders, such as company managemen...

Innovations in retail business models

NARCIS (Netherlands)

Sorescu, A.; Frambach, R.T.; Singh, J.; Rangaswamy, A.; Bridges, C.

2011-01-01

A retail business model articulates how a retailer creates value for its customers and appropriates value from the markets. Innovations in business models are increasingly critical for building sustainable advantage in a marketplace defined by unrelenting change, escalating customer expectations,

Framing Innovation

DEFF Research Database (Denmark)

Haase, Louise Møller; Laursen, Linda Nhu

2017-01-01

Designing a remarkable product innovation is a difficult challenge, which businesses today continuously are striving to tackle. This challenge is particularly present in the early phase of innovation, where the main product concept and frames of the innovation is determined. As a main challenge...... in the early phase is the reasoning process; innovation team are faced with open- ended ill-defines problems, where they need to make decisions about an unknown future having only incomplete, ambiguous and contradicting insights available. We study the reasoning of experts, how they frame to make sense of all...... the insights and create a basis for decision making in relation to a new project. Based on case studies of five innovative products from various industries, we suggest a Product Reasoning Model for understanding reasoning and envisioning of new product innovations in the early phases of innovation....

Towards a framework for business model innovation in health care delivery in developing countries.

Science.gov (United States)

Castano, Ramon

2014-12-02

Uncertainty and information asymmetries in health care are the basis for a supply-sided mindset in the health care industry and for a business model for hospitals and doctor's practices; these two models have to be challenged with business model innovation. The three elements which ensure this are standardizability, separability, and patient-centeredness. As scientific evidence advances and outcomes are more predictable, standardization is more feasible. If a standardized process can also be separated from the hospital and doctor's practice, it is more likely that innovative business models emerge. Regarding patient centeredness, it has to go beyond the oversimplifying approach to patient satisfaction with amenities and interpersonal skills of staff, to include the design of structure and processes starting from patients' needs, expectations, and preferences. Six business models are proposed in this article, including those of hospitals and doctor's practices. Unravelling standardized and separable processes from the traditional hospital setting will increase hospital expenditure, however, the new business models would reduce expenses. The net effect on efficiency could be argued to be positive. Regarding equity in access to high-quality care, most of the innovations described along these business models have emerged in developing countries; it is therefore reasonable to be optimistic regarding their impact on access by the poor. These models provide a promising route to achieve sustainable universal access to high quality care by the poor. Business model innovation is a necessary step to guarantee sustainability of health care systems; standardizability, separability, and patient-centeredness are key elements underlying the six business model innovations proposed in this article.

Business models for frugal innovation : the role of Resource-Constraints

OpenAIRE

Winterhalter, Stephan; Zeschky, Marco; Gassmann, Oliver; Weiblen, Tobias

2014-01-01

Frugal Innovation is an extreme case of innovation: radically new applications are innovated for an environment of extreme resource and cost constraints. While the phenomenon of frugal innovation has been described from a product perspective, very little is known about how firms organize frugal innovation on a business model level. This study is based on a multiple case study approach investigating five business models for frugal innovation in the context of the medical equipment market in em...

CASE ANALYSIS OF INNOVATION IN THE PACKAGING INDUSTRY USING THE CYCLIC INNOVATION MODEL

OpenAIRE

NICHOLAS FORD; PAUL TROTT; CHRIS SIMMS; DAP HARTMANN

2014-01-01

This paper builds upon Berkhout et al.’s (2010) cyclic innovation model (CIM). This model was shown to provide an effective framework for understanding and managing the innovation process and to address many of the shortcomings of previous models. Building on that article we have applied CIM to an in-depth case study featuring a formable paperboard technology within the packaging industry. Using data gathered from 28 interviews conducted over a three year period, CIM, for the first time, is a...

Design, analysis and application of innovative composite PR connections between steel beams and CFT columns

International Nuclear Information System (INIS)

Hu, Jong Wan; Leon, Roberto T; Choi, Eunsoo

2011-01-01

In this research, three structural design concepts are integrated: the use of composite concrete-filled tube (CFT) columns, the use of partially restrained (PR) connections and the introduction of innovative materials (shape memory alloys) in the connection design. These concepts are used to enhance the robustness and performance of composite-special moment frames. These innovative connections intend to exploit the recentering properties of super-elastic SMA tension bars, the energy dissipation capacity of low-carbon steel bars and the toughness of CFT columns. PR-CFT connection prototypes were designed based on a hierarchy of strength models for each connection component. Simplified user joint elements based on the mechanical modeling approach were formulated in an effort to simulate the realistic behavior of bolted connections. The application of new connections to low-rise PR composite frames is illustrated by designing four buildings in both 2D and 3D for the western US region. The performance of these composite frames was compared with those with conventional welded frames in terms of strength, ductility and recentering behavior. In all three areas, frames with the PR composite connections showed superior performance. This is due primarily to the capability of this system to redistribute inter-story drift more evenly through the height of the frame

Developing biomedical devices design, innovation and protection

CERN Document Server

Andreoni, Giuseppe; Colombo, Barbara

2013-01-01

During the past two decades incredible progress has been achieved in the instruments and devices used in the biomedical field. This progress stems from continuous scientific research that has taken advantage of many findings and advances in technology made available by universities and industry. Innovation is the key word, and in this context legal protection and intellectual property rights (IPR) are of crucial importance. This book provides students and practitioners with the fundamentals for designing biomedical devices and explains basic design principles. Furthermore, as an aid to the dev

A perspective on open innovation in small- and medium-sized enterprises in South Africa, and design requirements for an open innovation approach

Directory of Open Access Journals (Sweden)

Krause, Willie

2015-05-01

Full Text Available This paper provides key results from an exploratory research study aimed at understanding the current landscape in small- and medium-sized enterprises (SMEs in South Africa with regard to their appetite for, and use of, open innovation. The survey, which was conducted within a contained group of SMEs that belong to business network groups on LinkedIn, explored the current use and perception of open innovation. It was found that collaboration is the approach most preferred by the SMEs surveyed, with customers and suppliers as their preferred innovation partners. Based on the findings of the survey, this paper proposes 25 design requirements, grouped into five functional categories, for an open innovation approach. The design requirements have been developed as a primer to a more complete open innovation approach for SMEs.

The Physical Internet and Business Model Innovation

Directory of Open Access Journals (Sweden)

Diane Poulin

2012-06-01

Full Text Available Building on the analogy of data packets within the Digital Internet, the Physical Internet is a concept that dramatically transforms how physical objects are designed, manufactured, and distributed. This approach is open, efficient, and sustainable beyond traditional proprietary logistical solutions, which are often plagued by inefficiencies. The Physical Internet redefines supply chain configurations, business models, and value-creation patterns. Firms are bound to be less dependent on operational scale and scope trade-offs because they will be in a position to offer novel hybrid products and services that would otherwise destroy value. Finally, logistical chains become flexible and reconfigurable in real time, thus becoming better in tune with firm strategic choices. This article focuses on the potential impact of the Physical Internet on business model innovation, both from the perspectives of Physical-Internet enabled and enabling business models.

Improving Machining Accuracy of CNC Machines with Innovative Design Methods

Science.gov (United States)

Yemelyanov, N. V.; Yemelyanova, I. V.; Zubenko, V. L.

2018-03-01

The article considers achieving the machining accuracy of CNC machines by applying innovative methods in modelling and design of machining systems, drives and machine processes. The topological method of analysis involves visualizing the system as matrices of block graphs with a varying degree of detail between the upper and lower hierarchy levels. This approach combines the advantages of graph theory and the efficiency of decomposition methods, it also has visual clarity, which is inherent in both topological models and structural matrices, as well as the resiliency of linear algebra as part of the matrix-based research. The focus of the study is on the design of automated machine workstations, systems, machines and units, which can be broken into interrelated parts and presented as algebraic, topological and set-theoretical models. Every model can be transformed into a model of another type, and, as a result, can be interpreted as a system of linear and non-linear equations which solutions determine the system parameters. This paper analyses the dynamic parameters of the 1716PF4 machine at the stages of design and exploitation. Having researched the impact of the system dynamics on the component quality, the authors have developed a range of practical recommendations which have enabled one to reduce considerably the amplitude of relative motion, exclude some resonance zones within the spindle speed range of 0...6000 min-1 and improve machining accuracy.

Fostering eco-innovation in SMEs through bridging research, education and industry for building a business oriented model

Directory of Open Access Journals (Sweden)

Hamburg Ileana

2017-07-01

Full Text Available Small and medium sized companies (SMEs assure economic growth in Europe. The Environmental Technologies Action Plan (ETAP concentrated and mobilized Member State and stakeholder efforts bringing eco-innovation from research to market, improving market conditions, opening up global markets. Rapid and reinforced actions are now required, building on the experience of ETAP helping SMEs to have benefits by introducing eco-innovative approaches into their operations. Particularly start-ups, can be the ideal incubators for eco-innovation, and can bring to market new, less environmentally damaging products, services and processes. Generally many SMEs are struggling to survive in an ongoing global recession and often they are becoming reluctant to release innovation, particularly eco-innovation (Assante et al., 2016. In this paper we present first the differences between eco-innovation based business models and those based on regular innovations. Secondly we give some approaches tested in national and European projects with participation of the authors in order to help SMEs to develop business models of eco-innovations. The first one is to build cooperation between researchers, educators and SME staff in order to explain SMEs the advantages of such models and to implement models designed by researchers. Secondly we used practice oriented forms of training for SMEs like Problem Based Learning (PBL as an efficient form for SMEs and entrepreneurship education to learn to solve problems like the building of an eco-innovation business model. Thirdly we use in our projects eco-innovation biographies (EIBs reflecting the evolutionary character of such innovations and the dynamics of related policy streams.

Design-Based Innovation for Manufacturing Firm Success in High-Cost Operating Environments

Directory of Open Access Journals (Sweden)

Göran Roos

The paper concludes that the design-based innovation paradigm is increasingly important within the manufacturing industry, but that its benefit can only be maximized if it is integrated with the other three value-creating approaches to innovation.

Design and competitive edge: A model for design management excellence in European SME's

OpenAIRE

Borja de Mozota, B

2002-01-01

This article suggests to use the conceptual model of Michael Porter Value Chain in order to integrate all the variables that explain the mechanism of value creation through design. The results of the study of 33 European SMES participating in the European Design Prize explain the role of design in the management of innovation, identify the variables that characterize design management and classify them according to the value chain concept. The main result of this research was the ...

An Engineering Educator's Decision Support Tool for Improving Innovation in Student Design Projects

Science.gov (United States)

Ozaltin, Nur Ozge; Besterfield-Sacre, Mary; Clark, Renee M.

2015-01-01

Learning how to design innovatively is a critical process skill for undergraduate engineers in the 21st century. To this end, our paper discusses the development and validation of a Bayesian network decision support tool that can be used by engineering educators to make recommendations that positively impact the innovativeness of product designs.…

Innovative features and fuel design approach in the iris reactor

International Nuclear Information System (INIS)

Petrovic, B.; Carelli, M.; Greenspan, E.; Matsumoto, H.; Padovani, E.; Ganda, F.

2002-01-01

The International Reactor Innovative and Secure (IRIS) is being developed by an international consortium of industry, laboratory, university and utility establishments, led by Westinghouse. The IRIS design addresses key requirements associated with advanced reactors, including improved safety, enhanced proliferation resistance, competitive electricity production cost, and improved waste management. IRIS is a modular, small/medium size (335 MWe) PWR with an integral vessel configuration. The objective has been to base its design on proven LWR technology, so that no new technology development is needed and near-term deployment is possible, yet at the same time to introduce innovative features making it attractive when compared to present PWRs. These opposing requirements resulted in an evolutionary approach to fuel and core design, balancing new features against the need to avoid extensive testing and demonstration programmes. (author)

Maintenance of Traffic for Innovative Geometric Design Work Zones

Science.gov (United States)

2015-12-01

Currently there are no guidelines within the Manual on Uniform Traffic Control Devices (MUTCD) on construction phasing and maintenance of traffic (MOT) for retrofit construction and maintenance projects involving innovative geometric designs. The res...

Innovation in Retail Process: From Consumers’ Experience to Immersive Store Design

Directory of Open Access Journals (Sweden)

Eleonora Pantano

2012-09-01

Full Text Available Due to the current advances in Information and Communication Technologies and consumers’ increasing interest in entertaining and interactive retail environments, the sector of retailing is forced to pursuit innovation to maintain existing consumers and attract new ones. Especially the use of virtual reality techniques offers tools for supporting the design of innovative systems capable of enhancing this process. The aim of this paper is to integrate the consumers’ experience in the development of innovation process for retailing. In particular, our findings highlight how the immersive technologies can be an efficient tool for pushing innovation in retailing. Therefore, the paper provides important issues for scholars and practitioners.

Design Driven Innovation as a Differentiation Strategy - in the Context of Automotive Industry

Directory of Open Access Journals (Sweden)

Mosarrat Farhana

2015-07-01

Full Text Available Though, in the automotive industry, technology is considered as a source of innovation and development, emerging change in consumer perception has brought industry focus on design. Evolution of this industry is closely related to the convergence of technology and design. In such context, implication of design driven innovation strategy in the automotive industry has potential to be explored and to create sustained competitive advantage through balancing customers’ need, technological opportunities and product meaning. The aim of this paper is to give a holistic view of design driven innovation as a differentiation strategy in the automotive industry and its implication for strategic management through some relevant research reviews and empirical information. On the contrary, this research lacks detailed description on industry practice to provide greater breadth, since it attempts to correlate the strategic concept of design with the dynamic capability of a firm in that particular industry.

Realistic Creativity Training for Innovation Practitioners: The Know-Recognize-React Model

DEFF Research Database (Denmark)

Valgeirsdóttir, Dagný; Onarheim, Balder

2017-01-01

As creativity becomes increasingly recognized as important raw material for innovation, the importance of identifying ways to increase practitioners’ creativity through rigorously designed creativity training programs is highlighted. Therefore we sat out to design a creativity training program...... the transdisciplinary study described in this paper. Co-creation was employed as a method to ensure the three layers of focus would be taken into consideration. The result is a program called Creative Awareness Training which is based on the new Know-Recognize-React model....

Trends in development of innovative business models

Directory of Open Access Journals (Sweden)

Krstić Milan

2016-01-01

Full Text Available The companies doing business in global markets are now compelled to do it in conditions of permanent and turbulent changes. In order to succeed within that kind of environment in the long run, they are to innovate and to continuously strengthen their own innovative strength. Consideration of gaining its own innovative strength becomes top agenda issue of strategic companies. To that purpose, this paper presents the shortened results of a desktop theoretical research that has been undertaken to improve the innovative power of companies. The survey and subsequent analysis identified relevant innovative business models (IBM of companies, some of which briefly presented (CANVAS, SHARE, and WOIS BLUE OCEAN Strategy, which now form the current IBM trend.

Framing Innovation

DEFF Research Database (Denmark)

Haase, Louise Møller; Laursen, Linda Nhu

2017-01-01

Designing a remarkable product innovation is a difficult challenge, which businesses today continuously are striving to tackle. This challenge is particularly present in the early phase of innovation, where the main product concept and frames of the innovation is determined. As a main challenge...... in the early phase is the reasoning process; innovation team are faced with open-ended ill-defines problems, where they need to make decisions about an unknown future having only incomplete, ambiguous and contradicting insights available. We study the reasoning of experts, how they frame to make sense of all...... the insights and create a basis for decision making in relation to a new project. Based on case studies of five innovative products from various industries, we suggest a Product Reasoning Model for understanding reasoning and envisioning of new product innovations in the early phases...

The differentiated impacts of organizational innovation practices on technological innovation persistence

OpenAIRE

Le Bas , Christian; Mothe , Caroline; Nguyen-Thi , Thuc Uyen

2015-01-01

International audience; Purpose – The purpose of this paper is to test the major determinants of technological (product and process) innovation persistence and provides evidence of the significant role of organizational innovation. Design/methodology/approach – Data came from two waves of the Luxembourg Community Innovation Survey (CIS): CIS2006 for 2004-2006 and CIS2008 for 2006-2008. The longitudinal data set resulted in a final sample of 287 firms. A multinomial probit model estimates the ...

New business models for antibiotic innovation.

Science.gov (United States)

So, Anthony D; Shah, Tejen A

2014-05-01

The increase in antibiotic resistance and the dearth of novel antibiotics have become a growing concern among policy-makers. A combination of financial, scientific, and regulatory challenges poses barriers to antibiotic innovation. However, each of these three challenges provides an opportunity to develop pathways for new business models to bring novel antibiotics to market. Pull-incentives that pay for the outputs of research and development (R&D) and push-incentives that pay for the inputs of R&D can be used to increase innovation for antibiotics. Financial incentives might be structured to promote delinkage of a company's return on investment from revenues of antibiotics. This delinkage strategy might not only increase innovation, but also reinforce rational use of antibiotics. Regulatory approval, however, should not and need not compromise safety and efficacy standards to bring antibiotics with novel mechanisms of action to market. Instead regulatory agencies could encourage development of companion diagnostics, test antibiotic combinations in parallel, and pool and make transparent clinical trial data to lower R&D costs. A tax on non-human use of antibiotics might also create a disincentive for non-therapeutic use of these drugs. Finally, the new business model for antibiotic innovation should apply the 3Rs strategy for encouraging collaborative approaches to R&D in innovating novel antibiotics: sharing resources, risks, and rewards.

Collaborative business modeling for systemic and sustainability innovations

DEFF Research Database (Denmark)

Rohrbeck, René; Konnertz, L.; Knab, S.

2013-01-01

Sustainability innovations are characterized by a systemic nature, and require that multiple organizations act in an orchestrated fashion. To jointly identify opportunities and plan sustainability innovations, new methods and approaches are needed. In this article we describe a case study where 8...... firms have collaborated to envision and create new business models in the energy industry. After describing this collaborative business modelling (CBM) approach, we discuss its strengths and limitations and compare it to two alternative methods of strategy and innovation planning: scenario technique...

Interactivity, Game Creation, Design, Learning, and Innovation

DEFF Research Database (Denmark)

This book constitutes the proceedings of two conferences: The 5th International Conference on ArtsIT, Interactivity and Game Creation (ArtsIT 2016) and the First International Conference on Design, Learning and Innovation (DLI 2016). ArtsIT is reflecting trends in the expanding field of digital art......, interactive art, and how game creation is considered an art form. The decision was made to augment the title of ArtsIT to be in future known as “The International Conference on Interactivity, Game Creation, Design, Learning, and Innovation”. The event was hosted in Esbjerg, Denmark in May 2016 and attracted...

Innovative business model as a source of competitive advantage for high-tech markets

OpenAIRE

Demkiv, Yaryna

2013-01-01

The role of innovative business model application for company's succesfull innovation activity is examined. The meaning of business model and innovative business model are defined. Components necessary to successful innovative business model are singled out. The nessesary conditions for innovative business model implementation success are described.

Transformation by design: nursing workforce innovation and reduction strategies in turbulent times of change.

Science.gov (United States)

Palazzo, Mary O

2015-01-01

The evolution of care delivery from an acute care and inpatient standard to the outpatient setting and health promotion model is generating the need for innovative workforce and infrastructure adjustments to meet the new paradigm of population health management. Successful transformation of the nursing workforce necessitates a positive style of thinking that addresses rational concerns during times of difficult transition. Nurse leaders are called to recognize and appreciate the strengths of the nursing workforce by involving them in the course of change through collaboration, planning, and discussion. One unique way to plan and develop new care delivery models is to adopt the framework used in health facility planning and design for new services, units, or hospitals. This framework is flexible and can be adjusted easily to meet the objectives of a small nursing workforce innovation project or expanded to encompass the needs of a large-scale hospital transformation. Structured questioning further helps the team to identify barriers to care and allows for the development of new concepts that are objective and in accord with evidence-based practice and data. This article explores the advantages and disadvantages of implementing innovative workforce redesign and workforce reduction strategies.

Models of Innovation Activity Firms and the Competitive State

Directory of Open Access Journals (Sweden)

Nekrasova Ekaterina, A.

2015-12-01

Full Text Available The paper clarified the concept of innovation activity of firms from the perspective of the model open innovation with traditional and alternative approaches to the methods of the protection of innovation activity results outlined. With the use of institutional tools, theoretical concepts and practical study the patterns of innovative activity of firms (external, internal & cooperative strategies are analyzed and the selection criteria for models of innovation are proposed on the basis of a comparison of transaction costs and benefits specific to the closed forms and conditions for cooperation. The forms of cooperation, their pros & cons are mentioned given the results of some empirical evidence. Practical recommendations for the Russian companies to organize their innovation activities are given, as well as on the improvement of competition policy with regard to the inclusion of innovation factor in the analysis of mergers in Russia (also based on the mechanism of the use of this factor by means of merger simulation models. The paper also suggests the criteria for the evaluation of collaborative R&D projects of firms as antitrust tools aimed to use the “rule of reason” when the decisions are made.

Business Models and Technological Innovation

OpenAIRE

Baden-Fuller, Charles; Haefliger, Stefan

2013-01-01

Business models are fundamentally linked with technological innovation, yet the business model construct is essentially separable from technology. We define the business model as a system that solves the problem of identifying who is (or are) the customer(s), engaging with their needs, delivering satisfaction, and monetizing the value. The framework depicts the business model system as a model containing cause and effect relationships, and it provides a basis for classification. We formulate ...

The innovative application studty on eco-packaging design and materials

OpenAIRE

Cui Yong Min; Ren Xin Guang

2016-01-01

The paper solves the increasingly deteriorate environmental problems by positively exploring how to utilize and develop eco-packaging design reasonably. The paper explores an effective method that combines eco-packaging and environmental protection materials, hoping to define the sustainable development road of packaging design. The paper is centered on the design application of eco-packaging and environmental protection materials, applies and analyzes the method to obtain innovative design r...

Mathematical model of innovative sustainability “green” construction object

Directory of Open Access Journals (Sweden)

Slesarev Michail

2016-01-01

Full Text Available The paper addresses the issue of finding sustainability of “green” innovative processes in interaction between construction activities and the environment. The problem of today’s construction science is stated as comprehensive integration and automation of natural and artificial intellects within systems that ensure environmental safety of construction based on innovative sustainability of “green” technologies in the life environment, and “green” innovative products. The suggested solution to the problem should formalize sustainability models and methods for interpretation of optimization mathematical modeling problems respective to problems of environmental-based innovative process management, adapted to construction of “green” objects, “green” construction technologies, “green” innovative materials and structures.

Towards describing co-design by the integration of Engineering Design and Technology and Innovation Management literature

DEFF Research Database (Denmark)

Parraguez, Pedro; Maier, Anja

2012-01-01

in the fields of Engineering Design (ED) and Technology and Innovation Management (TIM). Interactions between design and third parties in a range of co-design situations are examined via a targeted literature review, and a map is developed containing a network of keywords. As a result of this review, key...

The Responsible Research and Innovation (RRI) Maturity Model

DEFF Research Database (Denmark)

Stahl, Bernd; Obach, Michael; Yaghmaei, Emad

2017-01-01

Responsible research and innovation (RRI) is an approach to research and innovation governance aiming to ensure that research purpose, process and outcomes are acceptable, sustainable and even desirable. In order to achieve this ambitious aim, RRI must be relevant to research and innovation...... in industry. In this paper, we discuss a way of understanding and representing RRI that resonates with private companies and lends itself to practical implementation and action. We propose the development of an RRI maturity model in the tradition of other well-established maturity models, linked...... with a corporate research and development (R&D) process. The foundations of this model lie in the discourse surrounding RRI and selected maturity models from other domains as well as the results of extensive empirical investigation. The model was tested in three industry environments and insights from these case...

Innovative Design of Cam-Controlled Planetary Gear Trains

Directory of Open Access Journals (Sweden)

Wen-Hsiang Hsieh

2011-10-01

Full Text Available The objective of this paper is to perform the innovation design for the new structures of cam-controlled planetary gear trains (CCPGTs, based on the creative mechanism design methodology. Firstly, the design requirements and design constraints are summarized according to the kinematics characteristics of existing CCPGTs. Then, the (4, 5 and (5, 7 graphs are generated by the theory of number synthesis. After that, the atlas of feasible specialized graphs is obtained. Finally, the atlas of new designs is obtained through the particularization process. In addition, an illustrated example is given, and the feasibility of the design is verified by computer simulation using ADAMS software. The result indicates that new design can produce a more wide range of non-uniform motion than the existing design. Therefore, they are better alternatives for driving a variable speed input mechanism.

Business models in open innovation and commercialization - a dynamic approach

NARCIS (Netherlands)

Vanhaverbeke, W.P.M.; Picot, A; Doeblin, S.

2009-01-01

This afternoon I will talk about business models because in open innovation they play a crucial role. If you have read the books of Henry Chesbrough or other authors on open innovation, you know that business models are important in explaining the phenomenon of open innovation. Moreover, they are

Perspectives on a Learning-Model for Innovating Game-Based Movement in Sports and Health

DEFF Research Database (Denmark)

Elbæk, Lars; Friis, Jørgen Jakob

2017-01-01

science and health education. We therefore ask: Which learning approach and educational factors does a learning model need to provide, in order to establish the best foundation for learning innovation and the design of game-based movement solutions within sport and health education? This paper suggests......As fitness trackers promote the quantifiable self and exergaming and interactive playful installations find their way into the public domain, the design for movement comes into focus. New trends like mobile platforms for gamed-based interaction, such as Pokémon GO, are also attempting to promote...... an active lifestyle. Such digitally supported movement promote health and underlines a need for students to understand that movement design incorporates many aspects: technology, gamification, motivation and understanding of health. To support this, a movement innovation program was needed at our sports...

Understanding and Supporting Dynamic Capabilities of Design Teams in Production of Technology-Innovation

DEFF Research Database (Denmark)

Jensen, Ole Kjeldal

Rapid adaptation to a changing environment is essential for the survival of incumbent companies, but the capabilities required to lead the disruption of a technological trajectory are generally challenged by the process management activities that make the company operate efficiently within its...... current environment. This study explores the practices of engineering designers that are executing disruptive innovation projects for DONG Energy, a Danish energy utilities company. The aim of the study was to understand the role of the designer in disruptive innovation and to create a tool for supporting...... multidisciplinary design teams, while creating disruptive innovations. The results from this study are presented in five research Papers that address the following themes: 1) the willingness of engineers to follow formal procedures, 2) critical knowledge domains in front-end technology decisions, 3) knowledge...

Understanding Eco-innovation and Green Business Models

DEFF Research Database (Denmark)

Andersen, Maj Munch

2014-01-01

Eco-innovation is considered a still more important competitive strategy to maintain production in highcost economies such as the Danish one. Within the studies of economics of technological change only little research has been undertaken on the dynamics of eco-innovation. Rigorous statistics...... technologies which has taken a starting pointin the environmental effects of varies technologies. The seven categories are:1. Curative eco-innovations - add-on (clean-up, recycling and resource handling)2. Integrated continuous process and product eco-innovations (cleaner production and products)3. User...... and definitions of ecoinnovationare lacking leading to much confusion and methodologically weak empirical analyses. This paperseeks to remedy this by offering a definition and taxonomy of eco-innovations and discussing theimplications for green business model thinking, bringing in examples of Danish successful...

Innovation Process Planning Model in the Bpmn Standard

Directory of Open Access Journals (Sweden)

Jurczyk-Bunkowska Magdalena

2013-12-01

Full Text Available The aim of the article is to show the relations in the innovation process planning model. The relations argued here guarantee the stable and reliable way to achieve the result in the form of an increased competitiveness by a professionally directed development of the company. The manager needs to specify the effect while initiating the realisation of the process, has to be achieved this by the system of indirect goals. The original model proposed here shows the standard of dependence between the plans of the fragments of the innovation process which make up for achieving its final goal. The relation in the present article was shown by using the standard Business Process Model and Notation. This enabled the specification of interrelations between the decision levels at which subsequent fragments of the innovation process are planned. This gives the possibility of a better coordination of the process, reducing the time needed for the achievement of its effect. The model has been compiled on the basis of the practises followed in Polish companies. It is not, however, the reflection of these practises, but rather an idealised standard of proceedings which aims at improving the effectiveness of the management of innovations on the operational level. The model shown could be the basis of the creation of systems supporting the decision making, supporting the knowledge management or those supporting the communication in the innovation processes.

Sustainable innovation, business models and economic performance: an overview

NARCIS (Netherlands)

Montalvo Corral, C.

2013-01-01

Sustainable development requires radical and systemic innovations. Such innovations can be more effectively created and studied when building on the concept of business models. This concept provides firms with a holistic framework to envision and implement sustainable innovations. For researchers,

Experimental Spaces and Institutional Innovation

DEFF Research Database (Denmark)

Cartel, Melodie; Boxenbaum, Eva

and procedures that connect the prototype to the organizational field, hence increasing the likelihood of institutional innovation. We develop a process model of institutional institutionalization that, through temporal interactions between distancing work and anchoring work, enables the generation......This paper examines processes involved in designing experimental spaces for institutional innovation. Through a qualitative, process-oriented analysis of an experimental space related to the institutional innovation of carbon markets in Europe, we show how key actors in the European electricity...... sector deliberately designed an experimental space and engaged a range of stakeholders in experimenting incognito with a carbon market model. A mirror image of their prototype later appeared as European policy. Our findings show that the key actors engaged in two forms of institutional work, distancing...

Competing with the use of business model innovation : an exploratory case study of the journey of born global firms

OpenAIRE

Johansson, Marlene; Abrahamsson, Jan

2014-01-01

Purpose: The purpose of this article is to investigate how business models are used by born global firms to act upon new business opportunities and how they manage business model innovation over time to prosper and grow. Design/Methodology: The study is based on three exploratory case studies of born global firms in mobile communication, financial services and digital music distribution. Findings: Three interrelated capabilities to manage business model innovation are articulated in...

Intermediaries in the ‘Design for Sustainability’ Field : Strategies for Developing Innovation Support Mechanisms in Turkey

NARCIS (Netherlands)

Küçüksayraç, E.

2015-01-01

Design for sustainability is a key approach for achieving sustainable development. This PhD study investigates innovation support for companies working on design for sustainability and intermediaries that provide innovation support. The study focuses on Turkey, where design for sustainability is not

Design and Implementation of an Innovative Residential PV System

Science.gov (United States)

Najm, Elie Michel

This work focuses on the design and implementation of an innovative residential PV system. In chapter one, after an introduction related to the rapid growth of solar systems' installations, the most commonly used state of the art solar power electronics' configurations are discussed, which leads to introducing the proposed DC/DC parallel configuration. The advantages and disadvantages of each of the power electronics' configurations are deliberated. The scope of work in the power electronics is defined in this chapter to be related to the panel side DC/DC converter. System integration and mechanical proposals are also within the scope of work and are discussed in later chapters. Operation principle of a novel low cost PV converter is proposed in chapter 2. The proposal is based on an innovative, simplified analog implementation of a master/slave methodology resulting in an efficient, soft-switched interleaved variable frequency flybacks, operating in the boundary conduction mode (BCM). The scheme concept and circuit configuration, operation principle and theoretical waveforms, design equations, and design considerations are presented. Furthermore, design examples are also given, illustrating the significance of the newly derived frequency equation for flybacks operating in BCM. In chapters 3, 4, and 5, the design implementation and optimization of the novel DC/DC converter illustrated in chapter 2 are discussed. In chapter 3, a detailed variable frequency BCM flyback design model leading to optimizing the component selections and transformer design, detailed in chapter 4, is presented. Furthermore, in chapter 4, the method enabling the use of lower voltage rating switching devices is also discussed. In chapter 5, circuitry related to Start-UP, drive for the main switching devices, zero-voltage-switching (ZVS) as well as turn OFF soft switching and interleaving control are fully detailed. The experimental results of the proposed DC/DC converter are presented in

Design and testing of an innovative solar radiation measurement device

International Nuclear Information System (INIS)

Badran, Omar; Al-Salaymeh, Ahmed; El-Tous, Yousif; Abdala, Wasfi

2010-01-01

After review of studies conducted on the solar radiation measuring systems, a new innovative instrument that would help in measuring the accurate solar radiation on horizontal surfaces has been designed and tested. An advanced instrument with ease of use and high precision that would enable the user to take the readings in terms of solar intensity (W/m 2 ) has been tested. Also, the innovative instrument can record instantaneous readings of the solar intensities as well as the averages value of the solar radiation flux during certain periods of time. The instrument based in its design on being programmed by programmable interfacing controller (PIC). Furthermore, the power supply circuit is fed by the solar energy cells and does not need an external power source.

The Journey of Business Model Innovation in Media Agencies

DEFF Research Database (Denmark)

Jensen, Henrik; Sund, Kristian J.

2018-01-01

these agencies have altered their business models over a decade. We discuss three separate stages in this innovation process, labelled business model innovation (BMI) awareness, business model exploration, and business model exploitation. We find and document how different building blocks of the business model......Digital entrants have changed the competitive landscape for advertisers and media. Over the past decade, media agencies have grown more rapidly than the media market as a whole, securing a larger share of the value generated in the advertising industry. We develop a process model describing how...... are a focal point of innovation in each stage of the BMI process. Our findings offer a way for the media industry to understand the transformation of media agencies....

A Proposed Model for Measuring Performance of the University-Industry Collaboration in Open Innovation

Directory of Open Access Journals (Sweden)

Anca Draghici

2017-06-01

Full Text Available The paper aims to present a scientific approach to the creation, testing and validation of a model for performance measurement for university-industry collaboration (UIC. The main idea of the design process is to capitalize on existing success factors, facilitators and opportunities (motivation factors, knowledge transfer channels and identified benefits and to diminish or avoid potential threats and barriers that might interfere with such collaborations. The main purpose of the applied methodology is to identify solutions and measures to overcome the disadvantages, conflicts or risk issues and to facilitate the open innovation of industrial companies and universities. The methodology adopted was differentiated by two perspectives: (1 a business model reflecting the university perspective along with an inventory of key performance indicators (KPIs; (2 a performance measurement model (including performance criteria and indicators and an associated methodology (assimilated to an audit that could help companies increase collaboration with universities in the context of open innovation. In addition, in order to operationalize the proposed model (facilitating practical implementation, an Excel tool has been created to help identifying potential sources of innovation. The main contributions of the research concern the expansion of UICs knowledge to enhance open innovation and to define an effective performance measurement model and instrument (tested and validated by a case study for companies.

Product, service, and business model innovation: A discussion

OpenAIRE

Geissdoerfer, Martin; Vladimirova, Doroteya Kamenova; Van Fossen, Kirsten; Evans, Stephen

2018-01-01

Business model innovation is increasingly recognised to be a central part of strategic management that generates the decisive competitive advantages for a growing number of organisations. This is particularly relevant in the areas of corporate sustainability strategy and sustainable entrepreneurship, since technological innovations in isolation yield increasingly incremental economic, social and environmental performance improvements. Despite the surge of research into business model innovati...

Improving Design with Open Innovation

DEFF Research Database (Denmark)

Christiansen, John K.; Gasparin, Marta; Varnes, Claus

2013-01-01

of the best practices for open innovation. However, projects were not equally successful. The outcome seems to be highly influenced by the type of collaborative arrangements used and their application. In particular, the analysis indicates that organizational factors seem to be indicative but not sufficient...... in open innovation need both a broad knowledge of the various potential elements of an open innovation effort and a flexible attitude toward their application. INSET: Summary of Projects....

Influences of three-dimensional printing to product innovation design thinking

Directory of Open Access Journals (Sweden)

Liu Ling

2017-01-01

Full Text Available The increasing demand of individuation brings new challenges to traditional product design. This paper studies and analyzes three-dimensional print technology promotes the future development of product innovation design. The advantages of 3D printing equipment can help creative products enterprises shorten product manufacturing period and make them powerful in competition.

Can We Recognize an Innovation? Perspective from an Evolving Network Model

Science.gov (United States)

Jain, Sanjay; Krishna, Sandeep

"Innovations" are central to the evolution of societies and the evolution of life. But what constitutes an innovation? We can often agree after the event, when its consequences and impact over a long term are known, whether something was an innovation, and whether it was a "big" innovation or a "minor" one. But can we recognize an innovation "on the fly" as it appears? Successful entrepreneurs often can. Is it possible to formalize that intuition? We discuss this question in the setting of a mathematical model of evolving networks. The model exhibits self-organization , growth, stasis, and collapse of a complex system with many interacting components, reminiscent of real-world phenomena. A notion of "innovation" is formulated in terms of graph-theoretic constructs and other dynamical variables of the model. A new node in the graph gives rise to an innovation, provided it links up "appropriately" with existing nodes; in this view innovation necessarily depends upon the existing context. We show that innovations, as defined by us, play a major role in the birth, growth, and destruction of organizational structures. Furthermore, innovations can be categorized in terms of their graph-theoretic structure as they appear. Different structural classes of innovation have potentially different qualitative consequences for the future evolution of the system, some minor and some major. Possible general lessons from this specific model are briefly discussed.

Optimal design of passive containment cooling system for innovative PWR

International Nuclear Information System (INIS)

Ha, Huiun; Lee, Sang Won; Kim, Hangon

2017-01-01

Using the Generation of Thermal-Hydraulic Information for Containments (GOTHIC) code, thermal-hydraulic phenomena that occur inside the containment have been investigated, along with the preliminary design of the passive containment cooling system (PCCS) of an innovative pressurized water reactor (PWR). A GOTHIC containment model was constructed with reference to the design data of the Advanced Power Reactor 1400, and report related PCCS. The effects of the design parameters were evaluated for passive containment cooling tank (PCCT) geometry, PCCS heat exchanger (PCCX) location, and surface area. The analyzed results, obtained using the single PCCT, showed that repressurization and reheating phenomena had occurred. To resolve these problems, a coupled PCCT concept was suggested and was found to continually decrease the containment pressure and temperature without repressurization and reheating. If the installation level of the PCCX is higher than that of the PCCT, it may affect the PCCS performance. Additionally, it was confirmed that various means of increasing the external surface area of the PCCX, such as fins, could help improve the energy removal performance of the PCCS. To improve the PCCS design and investigate its performance, further studies are needed

Optimal design of passive containment cooling system for innovative PWR

Directory of Open Access Journals (Sweden)

Huiun Ha

2017-08-01

Full Text Available Using the Generation of Thermal-Hydraulic Information for Containments (GOTHIC code, thermal-hydraulic phenomena that occur inside the containment have been investigated, along with the preliminary design of the passive containment cooling system (PCCS of an innovative pressurized water reactor (PWR. A GOTHIC containment model was constructed with reference to the design data of the Advanced Power Reactor 1400, and report related PCCS. The effects of the design parameters were evaluated for passive containment cooling tank (PCCT geometry, PCCS heat exchanger (PCCX location, and surface area. The analyzed results, obtained using the single PCCT, showed that repressurization and reheating phenomena had occurred. To resolve these problems, a coupled PCCT concept was suggested and was found to continually decrease the containment pressure and temperature without repressurization and reheating. If the installation level of the PCCX is higher than that of the PCCT, it may affect the PCCS performance. Additionally, it was confirmed that various means of increasing the external surface area of the PCCX, such as fins, could help improve the energy removal performance of the PCCS. To improve the PCCS design and investigate its performance, further studies are needed.

Optimal design of passive containment cooling system for innovative PWR

Energy Technology Data Exchange (ETDEWEB)

Ha, Huiun; Lee, Sang Won; Kim, Hangon [Central Research Institute, Korea Hydro and Nuclear Power, Ltd., Daejeon (Korea, Republic of)

2017-08-15

Using the Generation of Thermal-Hydraulic Information for Containments (GOTHIC) code, thermal-hydraulic phenomena that occur inside the containment have been investigated, along with the preliminary design of the passive containment cooling system (PCCS) of an innovative pressurized water reactor (PWR). A GOTHIC containment model was constructed with reference to the design data of the Advanced Power Reactor 1400, and report related PCCS. The effects of the design parameters were evaluated for passive containment cooling tank (PCCT) geometry, PCCS heat exchanger (PCCX) location, and surface area. The analyzed results, obtained using the single PCCT, showed that repressurization and reheating phenomena had occurred. To resolve these problems, a coupled PCCT concept was suggested and was found to continually decrease the containment pressure and temperature without repressurization and reheating. If the installation level of the PCCX is higher than that of the PCCT, it may affect the PCCS performance. Additionally, it was confirmed that various means of increasing the external surface area of the PCCX, such as fins, could help improve the energy removal performance of the PCCS. To improve the PCCS design and investigate its performance, further studies are needed.

Innovative design, analysis and development practices in aerospace and automotive engineering

CERN Document Server

Chandrasekhar, U; Arankalle, Avinash

2014-01-01

The book presents the best articles presented by researchers, academicians and industrial experts in the International Conference on “Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering”. The book discusses new concept designs, analysis and manufacturing technologies, where more swing is for improved performance through specific and/or multifunctional linguistic design aspects to downsize the system, improve weight to strength ratio, fuel efficiency, better operational capability at room and elevated temperatures, reduced wear and tear, NVH aspects while balancing the challenges of beyond Euro IV/Barat Stage IV emission norms, Greenhouse effects and recyclable materials. The innovative methods discussed in the book will serve as a reference material for educational and research organizations, as well as industry, to take up challenging projects of mutual interest.

Handbook of design research methods in education innovations in science, technology, engineering, and mathematics learning and teaching

CERN Document Server

Lesh, Richard A; Baek, John Y

2008-01-01

This Handbook presents the latest thinking and current examples of design research in education. Design-based research involves introducing innovations into real-world practices (as opposed to constrained laboratory contexts) and examining the impact of those designs on the learning process. Designed prototype applications (e.g., instructional methods, software or materials) and the research findings are then cycled back into the next iteration of the design innovation in order to build evidence of the particular theories being researched, and to positively impact practice and the diffusion of the innovation. The Handbook of Design Research Methods in Education-- the defining book for the field -- fills a need in how to conduct design research by those doing so right now. The chapters represent a broad array of interpretations and examples of how today's design researchers conceptualize this emergent methodology across areas as diverse as educational leadership, diffusion of innovations, complexity theory, an...

A Model of Organizational Trajectories to Innovation Management

Directory of Open Access Journals (Sweden)

Alvair Silveira Torres Jr.

2007-03-01

Full Text Available The multiple-case study research in three industrial companies - located in Brazil- about organizational changing, comparing cases of lean production system implementation, revealed a suggested interpretation of the determinants and directions of organizational innovation. The model tries to account for both continuous changes and discontinuities in organizational innovation. Continuous changes are related to secondary innovation, which doesn’t break an organizational paradigm, while discontinuities are associated with a new trajectory, since a primary innovation adopted by the whole organization. Then, the innovative lean process associated with secondary innovation was inadequate to change the organizational trajectory and it explains the cyclical decisions. On the other hand, the lean production system related to primary innovation, assumes the role as a new trajectory, influencing changes in total organization. The greatest difference found in the companies for innovative diffusion process, was the aspect of spread the organizational principles or a simple set of management’s tools.

Sustaining innovation collaboration models for a complex world

CERN Document Server

Carleton, Tamara

2012-01-01

In many ways, the process of innovation is a constant social dance, where the best dancers thrive by adapting new steps with multiple partners. The systematic and continuous generation of value in any innovation system relies on collaboration between different groups, who must overcome multiple, often competing agendas and needs to work together fruitfully over the long term. Featuring contributions from leading researchers, business leaders, and policymakers representing North America, Europe, India, Africa, and Australasia, this volume investigates different combinations of collaborative arrangements among innovation actors, many of which are changing conventional expectations of institutional relationships. Collectively, the authors demonstrate that no particular combination has emerged as the most dominant, or even resilient, model of innovation. Several authors expand on our understanding of the triple helix model, with both academics and practitioners looking to the quadruple helix (encompassing busines...

Special Issue on ActorNetwork Theory, Value CoCreation and Design in Open Innovation Environments

DEFF Research Database (Denmark)

Tanev, Stoyan; Storni, Cristiano; Stuedahl, Dagny

2015-01-01

The present special issue focuses on the application of ANT to the articulation of a cocreative perspective on design in open innovation environments. The Editors invited submissions by authors using ANT to explore and discuss the link between value co-creation, design and innovation and especially...

Intuitive thinking of design and redesign on innovative aircraft cabin simulator

NARCIS (Netherlands)

Tan, C.F.; Chen, W.; Rauterberg, G.W.M.

2009-01-01

In this paper, the intuition approach in the design and redesign of the environmental friendly innovative aircraft cabin simulator is presented. The simulator is a testbed that was designed and built for research on aircraft passenger comfort improvement of long haul air travel. The simulation

Using an innovative price model to leverage the business model – The case of price model innovation in the largest Swedish taxi company

Directory of Open Access Journals (Sweden)

Carl-Johan Petri

2014-08-01

Full Text Available Purpose: The purpose of the paper is to describe how the biggest Swedish taxi company (Taxi Kurir developed an innovative price model to leverage the business model. Design/methodology/approach : The empirical data in the article describe Taxi Kurir’s development of a new price model. Data about the Swedish taxi market and about Taxi Kurir has been compiled though interviews and document studies. Detailed information about the background, development and implementation of Taxi Kurir’s new price model has been captured through interviews with representatives from Taxi Kurir. Findings : Based on both the empirical example, and other investigations, we have found that a company can create substantial changes in their price model, by just changing some of its basic characteristics. A well designed price model can contribute to leveraging the intentions of the business model. Practical implications : Most academic and practical texts about business models consider pricing to be an important component. However, they typically do not refer to the specifics of the price- or revenue models. According to the literature review in this paper, and the empirical findings, the configuration of a company’s price model should be aligned with its business model. This will contribute to leveraging the business model. Originality/value: The Swedish taxi market is one of the most deregulated in the world. Differently from most other countries, any individual or company can start and operate a taxi business. This case offers a unique description on how the biggest company in the market responded to the competition by introducing a fundamentally new price model, by making a small change in one of the dimensions in their existing price model.

“Extremely stimulating and exciting”: The influence of the designer as enthusiast on innovation processes

DEFF Research Database (Denmark)

Minder, Bettina; Lassen, Astrid Heidemann

2017-01-01

Design thinking has been widely applied as interdisciplinary innovation approach. Simultaneously inclusion of external designers for collaborative learning cycles across different departments have significantly gained importance. However in the context of these debates around design as approach...... and designers as external support, research has paid little attention as to what really happens when designers meet non-designers in innovation processes. We clarify and extend on this literature through drawing on the concept of enthusiasm. We use this concept as foil to analyse collaboration between non...

Design, innovation, and rural creative places: Are the arts the cherry on top, or the secret sauce?

Science.gov (United States)

Wojan, Timothy R; Nichols, Bonnie

2018-01-01

Creative class theory explains the positive relationship between the arts and commercial innovation as the mutual attraction of artists and other creative workers by an unobserved creative milieu. This study explores alternative theories for rural settings, by analyzing establishment-level survey data combined with data on the local arts scene. The study identifies the local contextual factors associated with a strong design orientation, and estimates the impact that a strong design orientation has on the local economy. Data on innovation and design come from a nationally representative sample of establishments in tradable industries. Latent class analysis allows identifying unobserved subpopulations comprised of establishments with different design and innovation orientations. Logistic regression allows estimating the association between an establishment's design orientation and local contextual factors. A quantile instrumental variable regression allows assessing the robustness of the logistic regression results with respect to endogeneity. An estimate of design orientation at the local level derived from the survey is used to examine variation in economic performance during the period of recovery from the Great Recession (2010-2014). Three distinct innovation (substantive, nominal, and non-innovators) and design orientations (design-integrated, "design last finish," and no systematic approach to design) are identified. Innovation- and design-intensive establishments were identified in both rural and urban areas. Rural design-integrated establishments tended to locate in counties with more highly educated workforces and containing at least one performing arts organization. A quantile instrumental variable regression confirmed that the logistic regression result is robust to endogeneity concerns. Finally, rural areas characterized by design-integrated establishments experienced faster growth in wages relative to rural areas characterized by establishments using no

Innovation in a complex environment

Directory of Open Access Journals (Sweden)

René Pellissier

2012-11-01

Objectives: The study objectives were, firstly, to establish the determinants for complexity and how these can be addressed from a design point of view in order to ensure innovation success and, secondly, to determine how this changes innovation forms and applications. Method: Two approaches were offered to deal with a complex environment – one allowing for complexity for organisational innovation and the other introducing reductionism to minimise complexity. These approaches were examined in a qualitative study involving case studies, open-ended interviews and content analysis between seven developing economy (South African organisations and seven developed economy (US organisations. Results: This study presented a proposed framework for (organisational innovation in a complex environment versus a framework that minimises complexity. The comparative organisational analysis demonstrated the importance of initiating organisational innovation to address internal and external complexity, with the focus being on the leadership actions, their selected operating models and resultant organisational innovations designs, rather than on technological innovations. Conclusion: This study cautioned the preference for technological innovation within organisations and suggested alternative innovation forms (such as organisational and management innovation be used to remain competitive in a complex environment.

ARCHITECTURAL FORM CREATION IN THE DESIGN STUDIO: PHYSICAL MODELING AS AN EFFECTIVE DESIGN TOOL

Directory of Open Access Journals (Sweden)

Wael Abdelhameed

2011-11-01

Full Text Available This research paper attempts to shed more light on an area of the design studio, which concerns with the use of physical modeling as a design medium in architectural form creation. An experiment has been carried out during an architectural design studio in order to not only investigate physical modeling as a tool of form creation but also improve visual design thinking that students employ while using this manual tool. To achieve the research objective, a method was proposed and applied to track form creation processes, based upon three types of operation, namely: sketching transformations, divergent physical-modeling transformations, and convergent physical-modeling transformations. The method helps record the innovative transitions of form during conceptual designing in a simple way. Investigating form creation processes and activities associated with visual design thinking enables the research to conclude to general results of the role of physical modeling in the conceptual phase of designing, and to specific results of the methods used in this architectural design studio experiment.

The model of evaluation of innovative potential of enterprise

Directory of Open Access Journals (Sweden)

Ганна Ігорівна Заднєпровська

2015-06-01

Full Text Available The basic components of the enterprise’s innovative potential evaluation process are investigated. It is offered the conceptual model of evaluation of the innovative potential that includes: subjects, objects, purpose, provision of information, principles, methods, criteria, indicators. It is noted that the innovative capacity characterizes the transition from the current to the strategic level of innovation potential and, thus, characterizes the composition of objects from position of user

Applying social innovation theory to examine how community co-designed health services develop: using a case study approach and mixed methods.

Science.gov (United States)

Farmer, Jane; Carlisle, Karen; Dickson-Swift, Virginia; Teasdale, Simon; Kenny, Amanda; Taylor, Judy; Croker, Felicity; Marini, Karen; Gussy, Mark

2018-01-31

Citizen participation in health service co-production is increasingly enacted. A reason for engaging community members is to co-design services that are locally-appropriate and harness local assets. To date, much literature examines processes of involving participants, with little consideration of innovative services are designed, how innovations emerge, develop and whether they sustain or diffuse. This paper addresses this gap by examining co-designed initiatives through the lens of social innovation - a conceptualisation more attuned to analysing grassroots innovation than common health services research approaches considering top-down, technical innovations. This paper considers whether social innovation is a useful frame for examining co-designed services. Eighty-eight volunteer community-based participants from six rural Australian communities were engaged using the same, tested co-design framework for a 12-month design and then 12-month implementation phase, in 24 workshops (2014-16). Mixed, qualitative data were collected and used to formulate five case studies of community co-designed innovations. A social innovation theory, derived from literature, was applied as an analytical frame to examine co-design cases at 3 stages: innovation growth, development and sustainability/diffusion. Social innovation theory was found relevant in examining and understanding what occurred at each stage of innovation development. Innovations themselves were all adaptations of existing ideas. They emerged due to local participants combining knowledge from local context, own experiences and exemplars. External facilitation brought resources together. The project provided a protective niche in which pilot innovations developed, but they needed support from managers and/or policymakers to be implemented; and to be compatible with existing health system practices. For innovations to move to sustainability/diffusion required political relationships. Challenging existing practice

From EcoDesign to Industrial Metabolism: Redefinition of Sustainable Innovation and Competitive Sustainability

DEFF Research Database (Denmark)

Taps, Stig B.; Brunø, Thomas Ditlev; Nielsen, Kjeld

2013-01-01

evaluation of the most commonly tools and techniques in use and suggests a redefinition of the concept of EcoDesign by integrating End-of-Life activities to gain industrial metabolism. This approach takes a broader innovation perspective, necessary to construct a sustainable innovation community...

Wave simulation for the design of an innovative quay wall: the case of Vlorë Harbour

Science.gov (United States)

Antonini, Alessandro; Archetti, Renata; Lamberti, Alberto

2017-01-01

Sea states and environmental conditions are basic data for the design of marine structures. Hindcasted wave data have been applied here with the aim of identifying the proper design conditions for an innovative quay wall concept. In this paper, the results of a computational fluid dynamics model are used to optimise the new absorbing quay wall of Vlorë Harbour (Republic of Albania) and define the design loads under extreme wave conditions. The design wave states at the harbour entrance have been estimated analysing 31 years of hindcasted wave data simulated through the application of WaveWatch III. Due to the particular geography and topography of the Bay of Vlorë, wave conditions generated from the north-west are transferred to the harbour entrance with the application of a 2-D spectral wave module, whereas southern wave states, which are also the most critical for the port structures, are defined by means of a wave generation model, according to the available wind measurements. Finally, the identified extreme events have been used, through the NewWave approach, as boundary conditions for the numerical analysis of the interaction between the quay wall and the extreme events. The results show that the proposed method, based on numerical modelling at different scales from macro to meso and to micro, allows for the identification of the best site-specific solutions, also for a location devoid of any wave measurement. In this light, the objectives of the paper are two-fold. First, they show the application of sea condition estimations through the use of wave hindcasted data in order to properly define the design wave conditions for a new harbour structure. Second, they present a new approach for investigating an innovative absorbing quay wall based on CFD modelling and the NewWave theory.

Barriers to Business Model Innovation in Swedish Agriculture

OpenAIRE

Sivertsson, Olof; Tell, Joakim

2015-01-01

Swedish agricultural companies, especially small farms, are struggling to be profitable in difficult economic times. It is a challenge for Swedish farmers to compete with imported products on prices. The agricultural industry, however, supports the view that through business model innovation, farms can increase their competitive advantage. This paper identifies and describes some of the barriers Swedish small farms encounter when they consider business model innovation. A qualitative approach...

Innovational Leadership in School Management

OpenAIRE

Mahmut Sagir

2017-01-01

This study aimed at examining school administrators’ innovational leadership behaviors and the level of practicing these behaviors. The study was designed using the descriptive model since it aimed to identify school administrators’ innovative behaviors and approaches in school management. School Management Innovational Leadership Scale (SMILES) developed (2016) by the researcher was used in the study as the data collection instrument. Data was collected from 111 school administrators and 346...

Innovative method by design-around concepts with integrating the algorithm for inventive problem solving

International Nuclear Information System (INIS)

Chen, Wang Chih; Chen Jahau Lewis

2014-01-01

The work proposes a new design tool that integrates design-around concepts with the algorithm for inventive problem solving (Russian acronym: ARIZ). ARIZ includes a complete procedure for analyzing problems and related resource, resolving conflicts and generating solutions. The combination of ARIZ and design-around concepts and understanding identified principles that govern patent infringements can prevent patent infringements whenever designers innovate, greatly reducing the cost and time associated with the product design stage. The presented tool is developed from an engineering perspective rather than a legal perspective, and so can help designers easily to prevent patent infringements and succeed in innovating by designing around. An example is used to demonstrate the proposed method.

Towards an understanding of business model innovation processes

DEFF Research Database (Denmark)

Taran, Yariv; Boer, Harry; Lindgren, Peter

2009-01-01

Companies today, in some industries more than others, invest more capital and resources just to stay competitive, develop more diverse solutions, and increasingly start to think more radically, when considering to innovate their business model. However, the development and innovation of business...

Theory Building- Towards an understanding of business model innovation processes

DEFF Research Database (Denmark)

Taran, Yariv; Boer, Harry; Lindgren, Peter

2009-01-01

Companies today, in some industries more than others, invest more capital and resources just to stay competitive, develop more diverse solutions, and increasingly start to think more radically, when considering to innovate their business model. However, the development and innovation of business...... models is a complex venture and has not been widely researched yet. The objective of this paper is therefore 1) to build a [descriptive] theoretical understanding, based on Christensen's (2005) three-step procedure, to business models and their innovation and, as a result of that, 2) to strengthen...... researchers' and practitioners' perspectives as to how the process of business model innovation can be realized. By using various researchers' perspectives and assumptions, we identify relevant inconsistencies, which consequently lead us to propose possible supplementary solutions. We conclude our paper...

Virtual Reality as Innovative Approach to the Interior Designing

Science.gov (United States)

Kaleja, Pavol; Kozlovská, Mária

2017-06-01

We can observe significant potential of information and communication technologies (ICT) in interior designing field, by development of software and hardware virtual reality tools. Using ICT tools offer realistic perception of proposal in its initial idea (the study). A group of real-time visualization, supported by hardware tools like Oculus Rift HTC Vive, provides free walkthrough and movement in virtual interior with the possibility of virtual designing. By improving of ICT software tools for designing in virtual reality we can achieve still more realistic virtual environment. The contribution presented proposal of an innovative approach of interior designing in virtual reality, using the latest software and hardware ICT virtual reality technologies

Exploring an innovation project as source of change in organization design

DEFF Research Database (Denmark)

Brix, Jacob; Peters, Lois S.

2015-01-01

This study builds new empirically based theory on how the processing of an innovation project with a high degree of uncertainty induces change in key components in organization design. By using an embedded case study as our research strategy and organisation design theory as our analytical lens, we...

Design, innovation, and rural creative places: Are the arts the cherry on top, or the secret sauce?

Science.gov (United States)

Nichols, Bonnie

2018-01-01

Objective Creative class theory explains the positive relationship between the arts and commercial innovation as the mutual attraction of artists and other creative workers by an unobserved creative milieu. This study explores alternative theories for rural settings, by analyzing establishment-level survey data combined with data on the local arts scene. The study identifies the local contextual factors associated with a strong design orientation, and estimates the impact that a strong design orientation has on the local economy. Method Data on innovation and design come from a nationally representative sample of establishments in tradable industries. Latent class analysis allows identifying unobserved subpopulations comprised of establishments with different design and innovation orientations. Logistic regression allows estimating the association between an establishment’s design orientation and local contextual factors. A quantile instrumental variable regression allows assessing the robustness of the logistic regression results with respect to endogeneity. An estimate of design orientation at the local level derived from the survey is used to examine variation in economic performance during the period of recovery from the Great Recession (2010–2014). Results Three distinct innovation (substantive, nominal, and non-innovators) and design orientations (design-integrated, “design last finish,” and no systematic approach to design) are identified. Innovation- and design-intensive establishments were identified in both rural and urban areas. Rural design-integrated establishments tended to locate in counties with more highly educated workforces and containing at least one performing arts organization. A quantile instrumental variable regression confirmed that the logistic regression result is robust to endogeneity concerns. Finally, rural areas characterized by design-integrated establishments experienced faster growth in wages relative to rural areas

Risk, innovation and change : design propositions for implementing risk management in organizations

NARCIS (Netherlands)

van Staveren, Martinus Theodorus

2009-01-01

This Ph.D. research generated unique design propositions for implementing existing risk management methodologies in organizations. The resulting design propositions incorporate a synthesis of risk management, innovation management and change management. True implementation of risk management is

Developing Writing Skill of Language Students by Applying Innovative Teaching Strategy Model Based on Social and Local Wisdom Contexts

Directory of Open Access Journals (Sweden)

Syarifuddin Achmad

2017-12-01

Full Text Available The aim of this study is to build up students’ writing skills through Innovation Teaching Strategy Model (ITSM. This study was conducted in Letters and Culture Faculty of Universitas Negeri Gorontalo (UNG, with the students of English and Indonesian department as the participants. The current study is based on the social culture and local wisdom context utilizing Information Computer Technology (ICT. This model supports the students to have a high level of thinking and performance in writing skills in English and Indonesian language. This study utilized Research and Development (R &D approach using Focus Group Discussion (FGD and Reflection method with the strategy of one group pre-test and post-test design. This study reaches two target achievements; firstly creating the effective innovation teaching strategy model after statistic examining through one group pre-test and post-test design, and secondly improving the students’ competencies and writing skill through learning and teaching process treatment of writing course as an effect of applying Innovation teaching strategy model application.

Diffusion of innovations in Axelrod’s model

Science.gov (United States)

Tilles, Paulo F. C.; Fontanari, José F.

2015-11-01

Axelrod's model for the dissemination of culture contains two key factors required to model the process of diffusion of innovations, namely, social influence (i.e., individuals become more similar when they interact) and homophily (i.e., individuals interact preferentially with similar others). The strength of these social influences are controlled by two parameters: $F$, the number of features that characterizes the cultures and $q$, the common number of states each feature can assume. Here we assume that the innovation is a new state of a cultural feature of a single individual -- the innovator -- and study how the innovation spreads through the networks among the individuals. For infinite regular lattices in one (1D) and two dimensions (2D), we find that initially the successful innovation spreads linearly with the time $t$, but in the long-time limit it spreads diffusively ($\\sim t^{1/2}$) in 1D and sub-diffusively ($\\sim t/\\ln t$) in 2D. For finite lattices, the growth curves for the number of adopters are typically concave functions of $t$. For random graphs with a finite number of nodes $N$, we argue that the classical S-shaped growth curves result from a trade-off between the average connectivity $K$ of the graph and the per feature diversity $q$. A large $q$ is needed to reduce the pace of the initial spreading of the innovation and thus delimit the early-adopters stage, whereas a large $K$ is necessary to ensure the onset of the take-off stage at which the number of adopters grows superlinearly with $t$. In an infinite random graph we find that the number of adopters of a successful innovation scales with $t^\\gamma$ with $\\gamma =1$ for $K> 2$ and $1/2 < \\gamma < 1$ for $K=2$. We suggest that the exponent $\\gamma$ may be a useful index to characterize the process of diffusion of successful innovations in diverse scenarios.

Open Innovation as Business Model Game-changer in the Public Sector

DEFF Research Database (Denmark)

Gaur, Aakanksha; Osella, Michele; Ferro, Enrico

2017-01-01

Organizations are increasingly looking to tap into external knowledge sources through open innovation initiatives. Most public sector agencies are in the early stages of adoption of open innovation and are in the process of defining relevant issues. Once such issue concerns how open innovation...... be better aligned with open innovation strategies (in our case crowdsourcing). Our results indicate that in adopting a crowd-based open innovation strategy, the content, structure and governance dimensions of public sector business model need to be aligned accordingly. The content of the business model...

Business model design through a designer's lens : Translating, transferring and transforming cognitive configurations into action

NARCIS (Netherlands)

Simonse, W.L.; Badke-Schaub, P.G.

2015-01-01

Strategic managers are challenged to take advantage of digitalisation opportunities related to services of social media and web 2.0 technologies. Business innovations such as crowd sourcing platforms require a new way of integrating business to technology, articulated in a new business model designs

A SEQUENTIAL MODEL OF INNOVATION STRATEGY—COMPANY NON-FINANCIAL PERFORMANCE LINKS

Directory of Open Access Journals (Sweden)

Wakhid Slamet Ciptono

2006-05-01

Full Text Available This study extends the prior research (Zahra and Das 1993 by examining the association between a company’s innovation strategy and its non-financial performance in the upstream and downstream strategic business units (SBUs of oil and gas companies. The sequential model suggests a causal sequence among six dimensions of innovation strategy (leadership orientation, process innovation, product/service innovation, external innovation source, internal innovation source, and investment that may lead to higher company non-financial performance (productivity and operational reliability. The study distributed a questionnaire (by mail, e-mailed web system, and focus group discussion to three levels of managers (top, middle, and first-line of 49 oil and gas companies with 140 SBUs in Indonesia. These qualified samples fell into 47 upstream (supply-chain companies with 132 SBUs, and 2 downstream (demand-chain companies with 8 SBUs. A total of 1,332 individual usable questionnaires were returned thus qualified for analysis, representing an effective response rate of 50.19 percent. The researcher conducts structural equation modeling (SEM and hierarchical multiple regression analysis to assess the goodness-of-fit between the research models and the sample data and to test whether innovation strategy mediates the impact of leadership orientation on company non-financial performance. SEM reveals that the models have met goodness-of-fit criteria, thus the interpretation of the sequential models fits with the data. The results of SEM and hierarchical multiple regression: (1 support the importance of innovation strategy as a determinant of company non-financial performance, (2 suggest that the sequential model is appropriate for examining the relationships between six dimensions of innovation strategy and company non-financial performance, and (3 show that the sequential model provides additional insights into the indirect contribution of the individual

Innovating a business model for services with storytelling

DEFF Research Database (Denmark)

Lund, Morten

2012-01-01

In recent years, the notion of business models has been able to innovate the way companies create new business opportunities. However, because business models most often constitute on a complex interplay of several actors, there is a need to be able to explore the nature of a business model....... This paper will propose to describe a business model by means of storytelling. In addition the paper will introduce the concept of archetypes of business models with the aim to seek a pat- tern in the light of the numerous business models available. Two cases will illustrate and dis- cuss storytelling...... and archetypes, and lead to the conclusion that they represent a valuable ap- proach to understanding and innovating business models....

Open innovations, innovation communities and firm's innovative activities

Directory of Open Access Journals (Sweden)

Getejanc Vesna

2016-01-01

Full Text Available The open innovation paradigm emphasizes the fact that firms can improve their performance by opening their business models and reduce their R&D costs by effective incorporation of external knowledge. In other words, companies are able to capture value through knowledge that exists outside the boundaries of their organization. The shift from closed to open model of innovation has imposed the necessity to adopt more open approach to innovation within traditional academic view of business strategy. The adoption of this innovative approach is emphasized even more, by the necessity for stronger connection and cooperation among the participants of the innovation process. Free will and collaboration are the main characteristics of open source software, which is recognized in literature as the role model of open innovation and is a rapidly growing method of technology development. Furthermore, innovative communities represent a great opportunity for improvement of the companies' innovation activities, since they have become an important source for identifying the needs and problems of the users. Their development has been fostered by information technologies and recent social changes in user behavior. Recognizing and better understanding the motivation of the members of the innovation communities that guide them to participate in the process of idea generation, can have significant influence on their incorporation within the innovation process. Equally important is to define the incentives that are suited for stimulating and fostering innovative user activities. Taking this topic in consideration, the purpose of this article is to address the following questions: In what way does the collaboration in open source software projects have positive effect on companies' innovation performance? What are the innovation communities and how can companies establish successful interaction with them? Why does the interaction with innovation communities lead to

The Use of National Systems of Innovation Models to Develop Indicators of Innovation and Technological Capacity

OpenAIRE

Holbrook, J. A.

1997-01-01

This paper addresses various models that can be used to assess indicators of innovation and technical capacity. It stresses the importance of looking at the national system of innovation (NSI) to gain a complete understanding of industry capacity.

78 FR 41074 - 60-Day Notice of Proposed Information Collection: Innovation in Affordable Housing Design Student...

Science.gov (United States)

2013-07-09

... real life problem faced by public housing authorities using innovations in affordable housing design... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5689-N-05] 60-Day Notice of Proposed Information Collection: Innovation in Affordable Housing Design Student Competition AGENCY: Office of Policy...

Governing Methods: Policy Innovation Labs, Design and Data Science in the Digital Governance of Education

Science.gov (United States)

Williamson, Ben

2015-01-01

Policy innovation labs are emerging knowledge actors and technical experts in the governing of education. The article offers a historical and conceptual account of the organisational form of the policy innovation lab. Policy innovation labs are characterised by specific methods and techniques of design, data science, and digitisation in public…

Open Innovation and Business Model: A Brazilian Company Case Study

Directory of Open Access Journals (Sweden)

Elzo Alves Aranha

2015-12-01

Full Text Available Open Innovation is increasingly being introduced in international and national organizations for the creation of value. Open innovation is a practical tool, requiring new strategies and decisions from managers for the exploitation of innovative activities. The basic question that this study seeks to answer is linked to the practice of open innovation in connection with the open business model geared towards the creation of value in a Brazilian company. This paper aims to present a case study that illustrates how open innovation offers resources to change the open business model in order to create value for the Brazilian company. The case study method of a company in the sector of pharma-chemical products was used. The results indicate that internal sources of knowledge, external sources of knowledge and accentuate working partnerships were adopted by company as strategies to offer resources to change the open business model in order to create value.

Innovative Design and Performance Evaluation of Bionic Imprinting Toothed Wheel.

Science.gov (United States)

Zhang, Zhihong; Wang, Xiaoyang; Tong, Jin; Stephen, Carr

2018-01-01

A highly efficient soil-burrowing dung beetle possesses an intricate outer contour curve on its foreleg end-tooth. This study was carried out based on evidence that this special outer contour curve has the potential of reducing soil penetration resistance and could enhance soil-burrowing efficiency. A toothed wheel is a typical agricultural implement for soil imprinting, to increase its working efficiency; the approach of the bionic geometrical structure was utilized to optimize the innovative shape of imprinting toothed wheel. Characteristics in the dung beetle's foreleg end-tooth were extracted and studied by the edge detection technique. Then, this special outer contour curve was modeled by a nine-order polynomial function and used for the innovative design of imprinting the tooth's cutting edge. Both the conventional and bionic teeth were manufactured, and traction tests in a soil bin were conducted. Taking required draft force and volume of imprinted microbasin as the evaluating indexes, operating efficiency and quality of different toothed wheels were compared and investigated. Results indicate that compared with the conventional toothed wheel, a bionic toothed wheel possesses a better forward resistance reduction property against soil and, meanwhile, can enhance the quality of soil imprinting by increasing the volume of the created micro-basin.

Pedagogical innovation in teacher teams

DEFF Research Database (Denmark)

Weitze, Charlotte Lærke

2015-01-01

This paper presents findings from a longitudinal design-based research project examining how to enable reflection and pedagogical innovation in teacher teams. The article identifies and analyses the teachers’ learning trajectories and innovative strategies when working together in the IT...... learning designs, the research aims to clarify what kind of knowledge is being developed and shared in the teacher teams, and how this contributes to the organisational learning process. The context is Global Classroom, an innovative synchronous hybrid videoconference concept, where adult students can......-pedagogical Think Tank for Teacher Teams (after this: ITP4T) (Weitze, 2014a), a competence development model, which was developed in an earlier phase of the research project. By using theoretical lenses from innovative knowledge development frameworks to examine the teachers’ utterances, interactions and new...

Open Innovation at NASA: A New Business Model for Advancing Human Health and Performance Innovations

Science.gov (United States)

Davis, Jeffrey R.; Richard, Elizabeth E.; Keeton, Kathryn E.

2014-01-01

This paper describes a new business model for advancing NASA human health and performance innovations and demonstrates how open innovation shaped its development. A 45 percent research and technology development budget reduction drove formulation of a strategic plan grounded in collaboration. We describe the strategy execution, including adoption and results of open innovation initiatives, the challenges of cultural change, and the development of virtual centers and a knowledge management tool to educate and engage the workforce and promote cultural change.

Innovative Mobile Platform Developments for Electronic Services Design and Delivery

DEFF Research Database (Denmark)

Scupola, Ada

In the ever-growing world of technology, it is becoming more important to understand the developments of new electronic services and mobile applications. Innovative Mobile Platform Developments for Electronic Services Design, and Delivery is a comprehensive look at all aspects of production manag...

Open innovation models - a case study of playing poker with chess pieces

DEFF Research Database (Denmark)

Goduscheit, René Chester; Bergenholtz, Carsten; Jørgensen, Jacob Høj

2009-01-01

The qualities of employing open innovation models are widely acknowledgedamong academics and practitioners. Open innovation is perceived as a meansto ensure flexibility and create options for future business. However, theorganisational challenges in employing open innovation models as opposed tom...

Managing business model innovation risks - lessons for theory and practice

DEFF Research Database (Denmark)

Taran, Yariv; Chester Goduscheit, René; Boer, Harry

2015-01-01

approach, arguing from a “no risk no reward” aphorism, a sloppy implementation approach towards business model innovation may result in catastrophic, sometimes even fatal, consequences to a firm’s core business. Based on four unsuccessful business model innovation experiences, which took place in three...

AI/OR computational model for integrating qualitative and quantitative design methods

Science.gov (United States)

Agogino, Alice M.; Bradley, Stephen R.; Cagan, Jonathan; Jain, Pramod; Michelena, Nestor

1990-01-01

A theoretical framework for integrating qualitative and numerical computational methods for optimally-directed design is described. The theory is presented as a computational model and features of implementations are summarized where appropriate. To demonstrate the versatility of the methodology we focus on four seemingly disparate aspects of the design process and their interaction: (1) conceptual design, (2) qualitative optimal design, (3) design innovation, and (4) numerical global optimization.

Beyond agricultural innovation systems? Exploring an agricultural innovation ecosystems approach for niche design and development in sustainability transitions

NARCIS (Netherlands)

Pigford, Ashlee Ann E.; Hickey, Gordon M.; Klerkx, Laurens

2018-01-01

Well-designed and supported innovation niches may facilitate transitions towards sustainable agricultural futures, which may follow different approaches and paradigms such as agroecology, local place-based food systems, vertical farming, bioeconomy, urban agriculture, and smart farming or digital

A SEQUENTIAL MODEL OF INNOVATION STRATEGY—COMPANY NON-FINANCIAL PERFORMANCE LINKS

OpenAIRE

Ciptono, Wakhid Slamet

2006-01-01

This study extends the prior research (Zahra and Das 1993) by examining the association between a company’s innovation strategy and its non-financial performance in the upstream and downstream strategic business units (SBUs) of oil and gas companies. The sequential model suggests a causal sequence among six dimensions of innovation strategy (leadership orientation, process innovation, product/service innovation, external innovation source, internal innovation source, and investment) that may ...

Contribution to pressure vessels design of innovative methods and comparative application with standardized rules on a realistic structure – Part I

International Nuclear Information System (INIS)

Rohart, Philippe; Panier, Stéphane; Hariri, Saïd; Simonet, Yves; Afzali, Mansour

2015-01-01

Design of pressure vessels, which are subjected to various natures of loading, must prevent damage mechanisms occurrence. For a load applied or maintained with a given intensity, primary failure modes can appear, such as gross plastic deformation, plastic instability or buckling. For design-by-analysis, the reference methodology is based on an elastic stress calculation. During the last decade, studies have shown that this ingenious procedure could provide conservative design limits. They can become actually overly conservative in a context of increasing complexity of geometry and loading modelling. In parallel, technological and theoretical developments enabled limit analysis to be considered as an interesting design methodology. This is suggested in standards and codes (EN 13445, CODAP, Boiler and Pressure Vessels Code) since the early 2000"'"s. In this first of two companion papers, a set of standardized and innovative procedures is introduced. These approaches rely on various concepts, such as elasticity, incremental elastoplasticity, or elastic compensation (Modified Elastic Compensation Method, Linear Matching Method). Each methodology is presented on theoretical aspects, eventually adapted so as to take into account safety margins. They are then applied on a model inspired from a real industrial reactor, using Abaqus. Results are compared to reference data from codes, in terms of accuracy and computing time. A final assessment underlines practical benefits that could be expected. - Highlights: • A review of pressure vessels design methods against gross plastic deformation is made. • Innovative methodologies are introduced in order to overcome practical limits of classical methods. • Comparative tests are performed on one Benchmark with both classical and innovative procedures. • Results show the ability of innovative methodologies to improve the ratio ‘accuracy’ – ‘computationnal time’.

Applying circular economy innovation theory in business process modeling and analysis

Science.gov (United States)

Popa, V.; Popa, L.

2017-08-01

The overall aim of this paper is to develop a new conceptual framework for business process modeling and analysis using circular economy innovative theory as a source for business knowledge management. The last part of the paper presents an author’s proposed basic structure for a new business models applying circular economy innovation theories. For people working on new innovative business models in the field of the circular economy this paper provides new ideas for clustering their concepts.

Towards controlled innovation of complex objects. : A sociotechnical approach to describing ship design

NARCIS (Netherlands)

van Bruinessen, T.M.

2016-01-01

Within the ship design industry, and in particular in the development of large, complex and innovative vessels experienced ship designers play an important role in organizing and structuring the design process. How this actually happens within projects that develop such large, complex and

Stochastic diffusion models for substitutable technological innovations

NARCIS (Netherlands)

Wang, L.; Hu, B.; Yu, X.

2004-01-01

Based on the analysis of firms' stochastic adoption behaviour, this paper first points out the necessity to build more practical stochastic models. And then, stochastic evolutionary models are built for substitutable innovation diffusion system. Finally, through the computer simulation of the

Modelling efficient innovative work: integration of economic and social psychological approaches

Directory of Open Access Journals (Sweden)

Babanova Yulia

2017-01-01

Full Text Available The article deals with the relevance of integration of economic and social psychological approaches to the solution of enhancing the efficiency of innovation management. The content, features and specifics of the modelling methods within each of approaches are unfolded and options of integration are considered. The economic approach lies in the generation of the integrated matrix concept of management of innovative development of an enterprise in line with the stages of innovative work and the use of the integrated vector method for the evaluation of the innovative enterprise development level. The social psychological approach lies in the development of a system of psychodiagnostic indexes of activity resources within the scope of psychological innovative audit of enterprise management and development of modelling methods for the balance of activity trends. Modelling the activity resources is based on the system of equations accounting for the interaction type of psychodiagnostic indexes. Integration of two approaches includes a methodological level, a level of empirical studies and modelling methods. There are suggested options of integrating the economic and psychological approaches to analyze available material and non-material resources of the enterprises’ innovative work and to forecast an optimal option of development based on the implemented modelling methods.

Modelling innovation performance of European regions using multi-output neural networks.

Science.gov (United States)

Hajek, Petr; Henriques, Roberto

2017-01-01

Regional innovation performance is an important indicator for decision-making regarding the implementation of policies intended to support innovation. However, patterns in regional innovation structures are becoming increasingly diverse, complex and nonlinear. To address these issues, this study aims to develop a model based on a multi-output neural network. Both intra- and inter-regional determinants of innovation performance are empirically investigated using data from the 4th and 5th Community Innovation Surveys of NUTS 2 (Nomenclature of Territorial Units for Statistics) regions. The results suggest that specific innovation strategies must be developed based on the current state of input attributes in the region. Thus, it is possible to develop appropriate strategies and targeted interventions to improve regional innovation performance. We demonstrate that support of entrepreneurship is an effective instrument of innovation policy. We also provide empirical support that both business and government R&D activity have a sigmoidal effect, implying that the most effective R&D support should be directed to regions with below-average and average R&D activity. We further show that the multi-output neural network outperforms traditional statistical and machine learning regression models. In general, therefore, it seems that the proposed model can effectively reflect both the multiple-output nature of innovation performance and the interdependency of the output attributes.

Modelling innovation performance of European regions using multi-output neural networks.

Directory of Open Access Journals (Sweden)

Petr Hajek

Full Text Available Regional innovation performance is an important indicator for decision-making regarding the implementation of policies intended to support innovation. However, patterns in regional innovation structures are becoming increasingly diverse, complex and nonlinear. To address these issues, this study aims to develop a model based on a multi-output neural network. Both intra- and inter-regional determinants of innovation performance are empirically investigated using data from the 4th and 5th Community Innovation Surveys of NUTS 2 (Nomenclature of Territorial Units for Statistics regions. The results suggest that specific innovation strategies must be developed based on the current state of input attributes in the region. Thus, it is possible to develop appropriate strategies and targeted interventions to improve regional innovation performance. We demonstrate that support of entrepreneurship is an effective instrument of innovation policy. We also provide empirical support that both business and government R&D activity have a sigmoidal effect, implying that the most effective R&D support should be directed to regions with below-average and average R&D activity. We further show that the multi-output neural network outperforms traditional statistical and machine learning regression models. In general, therefore, it seems that the proposed model can effectively reflect both the multiple-output nature of innovation performance and the interdependency of the output attributes.

Strategic Design as Agile Driver in Innovating SME´s

DEFF Research Database (Denmark)

Ludvigsen, Martin; Rasmussen, Jørgen

2012-01-01

of strategic design must be based on actual ongoing processes in live business cases in order to be relevant to a wider audience. The value of purely speculative strategic design research reflections is diminishing as the research field is maturing and solidifying. The work reported in this paper highly......Strategic Design as Agile Driver in Innovating SME´s Poster-paper abstract, DMI2012 conference Martin Ludvigsen and Jørgen Rasmussen Aarhus School of Architecture, Department of Design Nørreport 20, 8000 Aarhus C, Denmark martin.ludvigsen@aarch.dk, jorgen.rasmussen@aarch.dk The paper reports...... on the last four years of research into strategic design (SD) at Aarhus School of Architecture, Denmark. Under the heading of organizational change and business development through design and user driven value identification, the authors have conducted a range of practice-based SD research projects engaging...

Logistics Innovation Process Revisited

DEFF Research Database (Denmark)

Gammelgaard, Britta; Su, Shong-Iee Ivan; Yang, Su-Lan

2011-01-01

Purpose – The purpose of this paper is to learn more about logistics innovation processes and their implications for the focal organization as well as the supply chain, especially suppliers. Design/methodology/approach – The empirical basis of the study is a longitudinal action research project...... that was triggered by the practical needs of new ways of handling material flows of a hospital. This approach made it possible to revisit theory on logistics innovation process. Findings – Apart from the tangible benefits reported to the case hospital, five findings can be extracted from this study: the logistics...... innovation process model may include not just customers but also suppliers; logistics innovation in buyer-supplier relations may serve as an alternative to outsourcing; logistics innovation processes are dynamic and may improve supplier partnerships; logistics innovations in the supply chain are as dependent...

Business models for maximising the diffusion of technological innovations for climate-smart agriculture

NARCIS (Netherlands)

Long, T.B.; Blok, V.; Poldner, Kim

2017-01-01

r, CSA technological innovation diffusion is subject to socio-economic barriers. The success of innovations is partly dependent on the business models that are used to diffuse them. Within the context of innovations for CSA, the role that innovation providers’ business models play in the successful

Models for open innovation in the pharmaceutical industry.

Science.gov (United States)

Schuhmacher, Alexander; Germann, Paul-Georg; Trill, Henning; Gassmann, Oliver

2013-12-01

The nature of the pharmaceutical industry is such that the main driver for its growth is innovation. In view of the vast challenges that the industry has been facing for several years and, in particular, how to manage stagnating research and development (R&D) productivity, pharmaceutical companies have opened their R&D organizations to external innovation. Here, we identify and characterize four new types of open innovator, which we call 'knowledge creator', 'knowledge integrator', 'knowledge translator' and 'knowledge leverager', and which describe current open R&D models. Copyright © 2013 Elsevier Ltd. All rights reserved.

Innovative Born Globals

DEFF Research Database (Denmark)

Kraus, Sascha; Brem, Alexander; Muench, Miriam

2017-01-01

Internationalization is a hot topic in innovation management, whereby the phenomenon of “Born Globals” is still limited to research in the domains of Entrepreneurship and International Management. As business model design plays a key role for Born Globals, we link these two concepts. For this, we...... propose hypotheses about the influence of efficiency-centered and novelty-entered business model design on international firm performance. To test these hypotheses, we performed a quantitative survey with 252 founders of international companies in Germany, Switzerland and Liechtenstein. Additionally, we...... gained further insights through a case study analysis of 11 Born Globals. The results show that business model design matters to international firm performance and the business model design of Born Globals tends to be more efficiency-centered. Based on a multiple case study, we analyzed business models...

A mental model for successful inter-disciplinary collaboration in curriculum innovation for information literacy

Directory of Open Access Journals (Sweden)

M. Detken Scheepers

2011-01-01

Full Text Available The University of Pretoria introduced a compulsory Information Literacy module to address the need for delivering motivated knowledgeable employees that embrace information and have the skills to find, select and use relevant information accurately, efficiently and effectively in an explosive information age. Low class attendance, an indication of unmotivated students, as well as the limited scholarly application of information literacy skills in consecutive academic years of study have been identified as possible barriers to the application of the desired skills. A collaborative action research project based on Whole Brain principles was introduced to motivate learners through innovative learning material in the module. A deeper understanding of the role of thinking preferences and thinking avoidances is essential in selecting a team that is responsible for the planning, design, development and delivery of learning opportunities and material. This article discusses the Whole Brain Model® as a mental model that underpins the successful collaboration of multidisciplinary teams and enhances innovative curriculum design that addresses alternative approaches to the teaching of Information Literacy.

Dynamic capabilities and innovation: a Multiple-Case Study

OpenAIRE

Bravo Ibarra, Edna Rocío; Mundet Hiern, Joan; Suñé Torrents, Albert

2009-01-01

After a detailed survey of the scientific literature, it was found that several characteristics of dynamic capabilities were similar to those of innovation capability. Therefore, with a deeper study of the first ones, it could be possible to design a model aimed to structure innovation capability. Thus, this work presents a conceptual model, where the innovation capability is shown as result of three processes: knowledge absorption and creation capability, knowledge integration and knowledge ...

Business models and business model innovation in a “Secure and Distributed Cloud Clustering (DISC) Society”

DEFF Research Database (Denmark)

Lindgren, Peter; Taran, Yariv

2011-01-01

of secure business models and how business models can be operated and innovated in a secure context have intensified tremendously. The development of new mobile and wireless security technologies gives hopes to really realize a secure cloud clustering society where business models can act and be innovated......The development and innovation of business models to a secure distributed cloud clustering society (DISC)—is indeed still a complex venture and has not been widely researched yet. Numerous types of security technologies are in these years proposed and in the “slip stream” of these the study...... secure—but we still have some steps to go before we reach the final destination. The paper gives a conceptual futuristic outlook on behalf of the input from SW2010 and state of the art business model research to what we can expect of business Model and business model innovation in a future secure cloud...

Initiative-taking, Improvisational Capability and Business Model Innovation in Emerging Market

DEFF Research Database (Denmark)

Cao, Yangfeng

Business model innovation plays a very important role in developing competitive advantage when multinational small and medium-sized enterprises (SMEs) from developed country enter into emerging markets because of the large contextual distances or gaps between the emerging and developed economies....... Many prior researches have shown that the foreign subsidiaries play important role in shaping the overall strategy of the parent company. However, little is known about how subsidiary specifically facilitates business model innovation (BMI) in emerging markets. Adopting the method of comparative...... innovation in emerging markets. We find that high initiative-taking and strong improvisational capability can accelerate the business model innovation. Our research contributes to the literatures on international and strategic entrepreneurship....

Innovative learning for innovation

NARCIS (Netherlands)

Dr.Ir. Hay Geraedts

2010-01-01

Introduction Innovation is crucial for companies who have to react to constantly changing markets. Several national and European research institutes stress the importance of developing innovation for small and medium size enterprises (SMEs). This was a trigger to design a minor on strategic

NEW DESIGN BASIC VOCATIONAL TRAINING PROGRAMMES IN THE CONTEXT OF CONSTRUCTING INNOVATION EDUCATION ENVIRONMENT OF THE UNIVERSITY

Directory of Open Access Journals (Sweden)

N. N. Demidova

2016-01-01

Full Text Available In accordance with modern educational standards, the basic professional educational programs should focus on the formation of basic research, innovative competence and initiative qualities of future highly qualified specialists.The new design is based on ideas OPOP interaction between education, science, innovation and involves a significant reorganization of the structure and content, the introduction of new forms of learning. The article explains the matrix model of project management as a condition for the establishment and implementation of a competitive basic professional educational program, reflecting the idea of complementarity and integration of education and science. The model assumes a new method of functioning of professional community and students. The provided format of the main professional educational programs allows to speak about new quality of training of competitive specialists according to challenges of the modern world.

Design Thinking: Employing an Effective Multidisciplinary Pedagogical Framework to Foster Creativity and Innovation in Rural and Remote Education

Science.gov (United States)

Anderson, Neil

2012-01-01

This paper outlines a project to develop and track "design thinking" skills within groups of students in late primary and early secondary years of schooling in order to strengthen their creative skills and innovative mindsets. The outcome of the research will be the development of a model for the broad-based implementation of design…

Probabilistic Design and Management of Sustainable Concrete Infrastructure Using Multi-Physics Service Life Models

DEFF Research Database (Denmark)

Lepech, Michael; Geiker, Mette; Michel, Alexander

This paper looks to address the grand challenge of integrating construction materials engineering research within a multi-scale, inter-disciplinary research and management framework for sustainable concrete infrastructure. The ultimate goal is to drive sustainability-focused innovation and adoption...... cycles in the broader architecture, engineering, construction (AEC) industry. Specifically, a probabilistic design framework for sustainable concrete infrastructure and a multi-physics service life model for reinforced concrete are presented as important points of integration for innovation between...... design, consists of concrete service life models and life cycle assessment (LCA) models. Both types of models (service life and LCA) are formulated stochastically so that the service life and time(s) to repair, as well as total sustainability impact, are described by a probability distribution. A central...

Innovations in dynamic architecture

Directory of Open Access Journals (Sweden)

Abdulmajid Karanouh

2015-11-01

Full Text Available High performance adaptive solutions are capable of responding to the dynamic nature of users and context. These innovative and dynamic systems are steadily gaining ground over ubiquitous ‘best fit’ static models. These architectural elements often exist beyond the scope of mainstream building standards and traditional methods for data representation or communication. This presents major challenges to a highly standardized and compartmentalized industry in which ‘innovation’ is limited to a few signature practices that design iconic yet expensive structures, which often prioritize aesthetics over performance. This paper offers an overview of the benefits that integrated dynamic systems bring to buildings. Through an examination of an applied practice, this paper offers guidelines for communicating complex geometry in a clear design language across interdisciplinary collaborations. The use of diagrammatic grammar to translate underlying algorithmic rules into instructions for design allows complex, innovative solutions to be realized more effectively. The ideas presented here are based on the design principles of the competition-winning scheme of the Al-Bahr Towers. As lead consultant in Innovation Design & Research at AHR (former Aedas-UK, Abdulmajid Karanouh designed and spearheaded this project in close collaboration with Arup. The buildings won the Best Innovation Award 2012 by the Council for Tall Buildings and Urban Habitat (CTBUH. The pair of towers won recognition for its performance-driven form, and dynamic facade that operates following the movement of the sun.

Expect With Me: development and evaluation design for an innovative model of group prenatal care to improve perinatal outcomes.

Science.gov (United States)

Cunningham, Shayna D; Lewis, Jessica B; Thomas, Jordan L; Grilo, Stephanie A; Ickovics, Jeannette R

2017-05-18

Despite biomedical advances and intervention efforts, rates of preterm birth and other adverse outcomes in the United States have remained relatively intransigent. Evidence suggests that group prenatal care can reduce these risks, with implications for maternal and child health as well as substantial cost savings. However, widespread dissemination presents challenges, in part because training and health systems have not been designed to deliver care in a group setting. This manuscript describes the design and evaluation of Expect With Me, an innovative model of group prenatal care with a strong integrated information technology (IT) platform designed to be scalable nationally. Expect With Me follows clinical guidelines from the American Congress of Obstetricians and Gynecologists. Expect With Me incorporates the best evidence-based features of existing models of group care with a novel integrated IT platform designed to improve patient engagement and support, enhance health behaviors and decision making, connect providers and patients, and improve health service delivery. A multisite prospective longitudinal cohort study is being conducted to examine the impact of Expect With Me on perinatal and postpartum outcomes, and to identify and address barriers to national scalability. Process and outcome evaluation will include quantitative and qualitative data collection at patient, provider, and organizational levels. Mixed-method data collection includes patient surveys, medical record reviews, patient focus groups; provider surveys, session evaluations, provider focus groups and in-depth interviews; an online tracking system; and clinical site visits. A two-to-one matched cohort of women receiving individual care from each site will provide a comparison group (n = 1,000 Expect With Me patients; n = 2,000 individual care patients) for outcome and cost analyses. By bundling prevention and care services into a high-touch, high-tech group prenatal care model

User driven Innovation in new Workspace Design

DEFF Research Database (Denmark)

Bjerrum, Eva; Simonsen, John Brøndberg

2017-01-01

on experiences from several case studies we propose a way to unfreeze organisations. By using different methods to describe work (ethnographic methods: Observation, episodes, snapshots, photos) and traditional interviews and questionnaires, it is possible to plan and conduct workshop processes that challenge......In Denmark knowledge sharing and working flexibility are considered to be elements that contribute to innovation and improved competitiveness. This has resulted in more and more companies having introduced open flexible office design as a strategic tool to support knowledge sharing. Another reason...... for this focus on workspace design is the change in work and working patterns at knowledge organisations. Both managers and employees work at different places, at customer’s site, while travelling, at hotels and at home, so the focus on the company as being the main workplace changes. The change from traditional...

Business Model as an Inducer of Disruptive Innovations: The Case of Gol Airlines

Directory of Open Access Journals (Sweden)

Sirlei de Almeida Pereira

2015-10-01

Full Text Available This study was undertaken to investigate the premises that the success of disruptive innovation is related to the business model adopted by organizations. An analysis of five business models from the literature review - Bovet and Martha (2000, Applegate (2001, Chesbrough and Rosenbloom (2002, Osterwalder and Pigneur (2010, and Rodrigues, Maccari and Lenzi (2012 – was conducted based on the case of the Brazilian Gol Airlines who is recognized as a success business that promoted a disruptive innovation. The results suggest that the assertive choice of the business model can leverage innovation processes, and two of the models listed are adherence to the case studied. Keywords: Disruptive Innovation; Business Model; Innovation Elements; Strategy; Gol Airlines.

An innovation diffusion model for new mobile technologies acceptance

Directory of Open Access Journals (Sweden)

Barkoczia Nadi

2017-01-01

Full Text Available This paper aims to approach the diffusion model developed in 1960 by Frank Bass has been utilized to study the distribution of different types of new products and services. The Bass Model helps by describing the process in which new products are adopted in a market. This model is a useful tool for predicting the first purchase of an innovative product for which there are competing alternatives on the market. It also provides the innovator with information regarding the size of customers and the adoption time for the product. The second part of the paper is dedicated to a monographic study of specific conceptual correlations between the diffusion of technology and marketing management that emphasizes technological uncertainty and market uncertainty as major risks to innovative projects. In the final section, the results of empirical research conducted in Baia-Mare, Romania will be presented in a way that uses diffusion Bass model to estimate the adoption period for new mobile technologies.

Facilitating Data Driven Business Model Innovation - A Case study

DEFF Research Database (Denmark)

Bjerrum, Torben Cæsar Bisgaard; Andersen, Troels Christian; Aagaard, Annabeth

2016-01-01

. The businesses interdisciplinary capabilities come into play in the BMI process, where knowledge from the facilitation strategy and knowledge from phases of the BMI process needs to be present to create new knowledge, hence new BMs and innovations. Depending on the environment and shareholders, this also exposes......This paper aims to understand the barriers that businesses meet in understanding their current business models (BM) and in their attempt at innovating new data driven business models (DDBM) using data. The interdisciplinary challenge of knowledge exchange occurring outside and/or inside businesses......, that gathers knowledge is of great importance. The SMEs have little, if no experience, within data handling, data analytics, and working with structured Business Model Innovation (BMI), that relates to both new and conventional products, processes and services. This new frontier of data and BMI will have...

Facilitating Teacher Students’ Innovation Competence through Problem-Based Game Design Processes

DEFF Research Database (Denmark)

Hanghøj, Thorkild; Hovmand Sørensen, Sia

2013-01-01

and the interplay of different knowledge domains “inside” and “outside” of teacher education. By taking a mixed methods approach, we combine qualitative and quantitative methodologies for studying our case. This involved observations and interviews with selected groups as well as a post-camp survey with all......The aim of this paper is to describe how new teacher students develop innovation competence through problem-based game design processes by participating in an intro camp. The intro camp was held for 350 new teacher students at a Danish university college in 2011, which were asked to solve the real......-life problems of local schools by designing game solutions to be presented for and assessed by participating school directors and pupils. Based upon a pragmatist theoretical framework, we conceptualize the students’ development of innovation competence in relation to creative problem-solving, game frames...

The Quadruple Helix Model Enhancing Innovative Performance Of Indonesian Creative Industry

Directory of Open Access Journals (Sweden)

Sri Wahyu Lelly Hana Setyanti

2017-11-01

Full Text Available The creative industry in Indonesia has contributed positively to the national economic growth. Creative industry grows from the creativity and innovation performance of the business actors. The challenge of creative industry is how to completely understand the creative and innovative processes in business management. Therefore it requires an approach that combines the synergy between academicians entrepreneurs government and society in a quadruple helix model. The objective of this research is to develop a creativity model through a quadruple helix model in improving innovation performance of the creative industry.

Design and Operationalization of Technological Business Models

Directory of Open Access Journals (Sweden)

Adam Jabłoński

2015-01-01

Full Text Available The mechanisms of the network paradigm increasingly affecting the operation of companies form a new dimension of strategic management today. This applies also to the look at the design and operationalization of business models. Business models that become a source of competitive advantage in the market should have such a configuration that will provide the company with the capability to develop and grow in value. Innovation in particular determines this capability, which is the basis for the ability to create technologically new products and services. An interesting issue, not fully examined yet, is defining the principles of the design and operationalization of such business models in which technology determines their efficiency and effectiveness. These models may be technological business models. The aim of this paper is to discuss the important areas related to the design and operationalization of technological business models in the network environment and to present conclusions that are the basis for further research in this area. The author argues that in today’s, increasingly virtual reality effective and efficient tools for generating new value proposition for customers is the skillful design and use of technological business models developed by companies’ participation in the network environment. It is materialized in the form of achieving superior business results by the company.

An innovative liquid metal design with worldwide application potential

International Nuclear Information System (INIS)

Quinn, J.E.; Berglund, R.C.

1989-01-01

This paper reports that the United States nuclear program has been faced with major political, economic and technical challenges in recent years. One US program element, the Liquid Metal Reactor, has addressed these challenges in a systematic, focused manner. The result is an innovative modular design incorporating safety features that utilize inherent characteristics. This Advanced Liquid Metal Reactor (ALMR) is based on the PRISM concept, originated by the General Electric Company in 1981. This design should also be attractive in other developed countries that have deployed, and/or are deploying, nuclear power. The design's safety features can achieve neutronic shutdown and decay heat removal without relying on operator action or engineered active safety features. The ALMR utilizes many innovations including: a passive reactor vessel air cooling system for decay heat removal; the use of a sealed reactor assembly; seismic isolation; electromagnetic primary pumps; and an in-vessel fuel transfer machine. The US ALMR design incorporates a metal fuel core as its reference, however, the required safety performance can also be achieved with an oxide core having similar safety features. This flexibility is particularly important when addressing world wide ALMR applications. The reference ALMR reactor module, of which there are nine in a typical 1395 MW e plant, has a -6 meter by -20 meter vessel and a 471 MW thermal output, with a reactor outlet temperature of 485 degrees C and an overall conversion efficiency of 33%. This plant uses a saturated steam cycle and a non-safety grade secondary sodium system

OPEN INNOVATION MODELS - A CASE STUDY OF PLAYING POKER WITH CHESS PIECES

DEFF Research Database (Denmark)

Goduscheit, René Chester; Jørgensen, Jacob Høj; Bergenholtz, Carsten

2009-01-01

The qualities of employing open innovation models are widely acknowledgedamong academics and practitioners. Open innovation is perceived as a meansto ensure flexibility and create options for future business. However, theorganisational challenges in employing open innovation models as opposed...... tomore closed ones are not extensively explored in the literature. This paperaddresses these organisational challenges. On the basis of an in-depth casestudy of a project from the Danish energy sector, two prominent approacheswithin the open innovation paradigm, user-driven and network......-basedinnovation, are discussed. The analysis indicates that the organisationsinvolved in the project are only implementing the open innovation models to alimited degree. While indicating that they are employing open innovationapproaches, they are actually operating within a traditional, closed innovationmindset and to a certain...

Exploring business model innovation in professional service firms : Insights from architecture

NARCIS (Netherlands)

Lieftink, B.; Bos-de Vos, M.; Lauche, K.; Smits, A.

2014-01-01

Business model innovation may be a significant source of competitive advantage and firm performance. New ways of doing business have become increasingly important in the professional service sector. This research specifically focuses on business model innovation by architecture firms, which are

Design science research methods and patterns innovating information and communication technology

CERN Document Server

Vaishnavi, Vijay K

2015-01-01

Presenting innovative research methods, this second edition of a bestseller describes a simple and practical methodology for conducting cutting-edge design science research (DSR). It provides comprehensive guidance on how to conduct such research and supplies in-depth treatment of design science theory and the different types of theory that can be generated in design science research.Making novel use of the concept of patterns, it presents 84 research patterns for conducting effective DSR. It emphasizes design science theory throughout and is filled with practical examples of using patterns to

An innovative discrete multilevel sampler design

International Nuclear Information System (INIS)

Marvin, B.K.; De Clercq, P.J.; Taylor, B.B.; Mauro, D.M.

1995-01-01

An innovative, small-diameter PVC discrete multilevel sampler (DMLS) was designed for the Electric Power Research Institute (EPRI) to provide low-cost, discrete groundwater samples from shallow aquifers. When combined with appropriately-sized direct push soil sampling technologies, high resolution aquifer characterization can be achieved during initial site assessment or remediation monitoring activities. The sampler is constructed from 1-inch diameter PVC well materials, containing polyethylene tubing threaded through PVC disks. Self-expanding annular and internal bentonite seals were developed which isolate discrete sampling zones. The DMLS design allows customization of sampling and isolation zone lengths to suit site-specific goals. Installation of the DMLS is achieved using a temporary, expendable-tipped casting driven by direct push methods. This technique minimizes mobilization costs, site and soil column disturbances, and allows rapid installation in areas of limited overhead clearance. Successful pilot installations of the DMLS prototype have been made at a former manufactured gas plant (MGP) site and a diesel fuel spill site. Analysis of groundwater samples from these sites, using relative compound distributions and contaminant concentration profiling, confirmed that representative discrete samples were collected. This design provides both economical and versatile groundwater monitoring during all phases of site assessment and remediation

The innovative application studty on eco-packaging design and materials

Directory of Open Access Journals (Sweden)

Cui Yong Min

2016-01-01

Full Text Available The paper solves the increasingly deteriorate environmental problems by positively exploring how to utilize and develop eco-packaging design reasonably. The paper explores an effective method that combines eco-packaging and environmental protection materials, hoping to define the sustainable development road of packaging design. The paper is centered on the design application of eco-packaging and environmental protection materials, applies and analyzes the method to obtain innovative design requirements and development tendency of eco-packaging design by analyzing status and significance of eco-packaging design, combining with the development and main types of eco-packaging packaging materials, and based on the achievements acquired by eco-packaging and environmental protection materials. Meanwhile, the paper also reveals mutual dependence and mutual promotion of eco-packaging design and eco-packaging materials.

Innovation and dynamic capabilities of the firm: Defining an assessment model

Directory of Open Access Journals (Sweden)

André Cherubini Alves

2017-05-01

Full Text Available Innovation and dynamic capabilities have gained considerable attention in both academia and practice. While one of the oldest inquiries in economic and strategy literature involves understanding the features that drive business success and a firm’s perpetuity, the literature still lacks a comprehensive model of innovation and dynamic capabilities. This study presents a model that assesses firms’ innovation and dynamic capabilities perspectives based on four essential capabilities: development, operations, management, and transaction capabilities. Data from a survey of 1,107 Brazilian manufacturing firms were used for empirical testing and discussion of the dynamic capabilities framework. Regression and factor analyses validated the model; we discuss the results, contrasting with the dynamic capabilities’ framework. Operations Capability is the least dynamic of all capabilities, with the least influence on innovation. This reinforces the notion that operations capabilities as “ordinary capabilities,” whereas management, development, and transaction capabilities better explain firms’ dynamics and innovation.

From Process to Practice: Towards a Practice-Based Model of Digital Innovation

DEFF Research Database (Denmark)

Ciriello, Raffaele; Richter, Alexander; Schwabe, Gerhard

2017-01-01

companies and an extensive set of empirical data, this paper conceptualizes four interrelated digital innovation practices, namely making sense of an idea, aligning mental models, negotiating solution paths, and crafting an idea. We suggest a practice-based model of digital innovation, specify a set......The ongoing digitalization of many corporate functions, including the innovation process, brings about fundamental changes that urge us to rethink established theories. Facilitating digital innovation requires a deep understanding of the actual practices that are carried out by innovating people...... with the help of artifacts. In this paper, we study the use of artifacts and illustrate their different roles in the underlying innovation practices to provide rich insights into digital innovation from a practice perspective. Grounded in a nearly three year-long, qualitative case study at two Swiss software...

Organizational Learning, Strategic Flexibility and Business Model Innovation: An Empirical Research Based on Logistics Enterprises

Science.gov (United States)

Bao, Yaodong; Cheng, Lin; Zhang, Jian

Using the data of 237 Jiangsu logistics firms, this paper empirically studies the relationship among organizational learning capability, business model innovation, strategic flexibility. The results show as follows; organizational learning capability has positive impacts on business model innovation performance; strategic flexibility plays mediating roles on the relationship between organizational learning capability and business model innovation; interaction among strategic flexibility, explorative learning and exploitative learning play significant roles in radical business model innovation and incremental business model innovation.

Sustainability in the front-end of innovation at design agencies

NARCIS (Netherlands)

Storaker, A.; Wever, R.; Dewulf, K.; Blankenburg, D.

2013-01-01

In the two last decades a considerable amount of research has been conducted on the Front End of Innovation. This is the stage of the product development process where the design brief is formulated. This phase is argued to be crucial to the success of the final product. While the Front End of

Designing with users to meet people needs: a teaching model.

Science.gov (United States)

Anselmi, Laura; Canina, Marita; Coccioni, Elisabetta

2012-01-01

Being in a context of great transformations of the whole system company-product-market, design becomes interpreter of the society and strategic key-point for production realities. Design must assume an ergonomic approach and a methodology oriented to product innovation where people are the main focus of the system. Today it is visible the need for a methodological approach able to include the context of use employing user's "creative skills". In this scenario, a design educational model based only on knowledge doesn't seem to be fulfilling; the traditional "deductive" method doesn't meet the needs of new productive assets, here the urgency to experiment within the "inductive" method for the development of a method where to know and to know how, theory and practice, act synergistically. The aim is to teach a method able to help a young designer to understand people's needs and desires considering both the concrete/cognitive level and the emotional level. The paper presents, through some case studies, an educational model developed combining theoretical/conceptual and practical/applicatory aspects with user experiential aspects. The proposed approach to design enables the students to investigate users' needs and desires and helps them proposing innovative ideas and projects better fitting today's market realities.

Design Based Research: the Way of Developing and Implementing Educational Innovation

Directory of Open Access Journals (Sweden)

Tina Štemberger

2016-11-01

Full Text Available The appropriate implementation of innovation is a crucial factor in improving educational practice. In the implementation process, there is, however, often a lack of interaction between designers and practitioners that would enable the latter to become competent enough to implement theoretical knowledge into practice and to have an ongoing support from designers. Design-based research is based on close cooperation between researchers, practitioners and designers which consequently allows greater integration of research and practice in education. In the present paper, the beginnings, development, basic characteristics, advantages, disadvantages and the research process of design-based research are reviewed and an example of design-based research is presented.

Innovational Leadership in School Management

Directory of Open Access Journals (Sweden)

Mahmut Sagir

2017-05-01

Full Text Available This study aimed at examining school administrators’ innovational leadership behaviors and the level of practicing these behaviors. The study was designed using the descriptive model since it aimed to identify school administrators’ innovative behaviors and approaches in school management. School Management Innovational Leadership Scale (SMILES developed (2016 by the researcher was used in the study as the data collection instrument. Data was collected from 111 school administrators and 346 teachers during the 2015-2016 academic teaching year. According to the research results, school administrators’ innovational leadership behaviors are collected under three factors; "Encouraging Innovation", "Pursuing Innovation", and "Implementing Innovation".It was found that school administrators mostly show the innovational leadership behaviors expressed in the three factors and in the total scale. It was expressed in the study that compared to females; males believe that school administrators show more innovational leadership behaviors. Also, compared to participants with graduate degrees, participants with undergraduate degrees believe that school administrators show more innovational leadership behaviors. At the same time, compared to teachers, school administrators believe that they show more innovational leadership behaviors.

Advanced design cultures long-term perspective and continuous innovation

CERN Document Server

2015-01-01

This book describes new thinking and practice in Advanced Design (ADD) – design that is not merely highly developed but anticipates the future by envisioning novel products and processes. The focus is especially on the front end of innovation and the search for solutions in complex pioneering processes using design-related tools and practices. The book opens by describing these tools, the approaches that characterize ADD, and its historical dimension. Specific fields in which ADD has flourished are then examined, exploring the dynamics between research and design. The coverage ranges from transportation, lighting, and electrical appliances through to business networks, technology parks, and the development of ground-breaking materials. AdvanceDesign is the name of the research group at the Politecnico di Milano (Italy’s largest technical university) of which the authors are members. It was chosen to reflect both the “advanced”, tangible dimension of design in terms of modern product development, mater...

Resistance and support to electronic government, building a model of innovation

NARCIS (Netherlands)

Ebbers, Wolfgang E.; van Dijk, Johannes A.G.M.

2007-01-01

In several countries forces that resist e-government innovations apparently override those that support them. A first step is taken in order to identify organizational processes of resistance and support to e-government innovations. A multi-disciplinary and non-linear innovation model is proposed

International Conference on Innovative Design and Development Practices in Aerospace and Automotive Engineering

CERN Document Server

Chandrasekhar, U

2017-01-01

The book presents the best articles presented by researchers, academicians and industrial experts in the International Conference on “Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2016)”. The book discusses new concept designs, analysis and manufacturing technologies, where more swing is for improved performance through specific and/or multifunctional linguistic design aspects to downsize the system, improve weight to strength ratio, fuel efficiency, better operational capability at room and elevated temperatures, reduced wear and tear, NVH aspects while balancing the challenges of beyond Euro IV/Barat Stage IV emission norms, Greenhouse effects and recyclable materials. The innovative methods discussed in the book will serve as a reference material for educational and research organizations, as well as industry, to take up challenging projects of mutual interest.

Applying and incorporating user driven innovation when designing concepts

DEFF Research Database (Denmark)

Thorp Hansen, Claus; Brønnum, Louise

This paper addresses the difficulties seen when working within the user driven innovation [UDI] paradigm. We examine some of the circumstances that often make it difficult to work with user insights in concept design. UDI has become a recognized design approach, but has not yet accommodated...... a design practice explicitly considering the type of user insights this approach implies. For that reason UDI has yet to prove itself and its potential effect; a study of Danish initiative “program for user driven innovation” has shown little effect in this regard. However it has shown that radical new...... insights have been produced but at the same time to abstract when integrated in the design process. We will discuss and propose a framework for working with user insights in concept design, based on existing concept frameworks but actively addressing and incorporating user insights as a new type of input...

Measurement of Design Process Front-End – Radical Innovation Approach

DEFF Research Database (Denmark)

Berg, Pekka; Pihlajamaa, Jussi; Hansen, Poul H. Kyvsgård

2014-01-01

The overall structure and the main characteristics of the future product are all decided in the front-end phase, which then strongly affects subsequent new product development activities. Recent studies indicate that these early front-end activities represent the most troublesome phase...... of the innovation process, and at the same time one of the greatest opportunities to improve the overall innovation capability of a company. In this paper dealing with the criteria we concentrate only for the objectives viewpoint and leave the attributes discussion to the future research. Two most crucial questions...... the innovation activities front end contains five assessment viewpoints as follows; input, process, output (including impacts), social environment and structural environment. Based on the results from our first managerial implications in three Finnish manufacturing companies we argue, that the developed model...

Innovative design of ironing board based on Kansei Engineering and usability test

Directory of Open Access Journals (Sweden)

Zhafira Nadia

2018-01-01

Full Text Available Laundry business is popular service business in Indonesia that mostly involve muscle activity for lifting and ironing activity. It causes the worker get muscular fatigue and injury especially for ironing activity that is included in the static and monotonous activity. moreover, existed ironing board design in the market is not easy to be adjusted to standing or sitting position of workers. Hence, this paper aimed to design the innovative and adjustable ironing board to minimize the musculoskeletal complaint. The preliminary study is conducted by NBM questionnaires found that fatigue experienced mostly in the back, right upper arm, and calves. The product designed by Kansei engineering to satisfy consumer's feeling and assessed by USE questionnaire to fulfil consumer's usability. Orthogonal array and conjoint analysis were conducted to incorporate all attribute potentials in developing a new single concept design. Statistical analysis was also done to test the hypothesis. 80 respondents have participated in this study. The result of this study is an innovative design of ironing board which is valid to meet consumers' needs such as comfort, secure, attractive, sturdy, durable and multifunction and practical at 5% of the significant level.

An intelligent and interactive carpet role of design in a textile innovation project

NARCIS (Netherlands)

Deckers, E.J.L.; Stouw, van der B.; Peutz, J.

2012-01-01

This paper presents an ongoing innovation project on the development of an intelligent and interactive carpet called PeR+, short for Perception Rug Plus. This design-research project is a collaboration between an international flooring company, DESSO, and the Department of Industrial Design at the

Robustness Issues for Design of Innovative Timber Structures

DEFF Research Database (Denmark)

Hald, Frederik; Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

2013-01-01

Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious conse-quences in case of failure. The present paper summaries issues with respect to robustness of timber structures. Two different...... large span timber structures are analyzed and based on these analyses the paper presents guidelines for the future development of innovative timber struc-tures which are robust with respect to design and execution errors, unforeseen degradation and other potential hazards....

Modeling the sustainable development of innovation in transport construction based on the communication approach

Science.gov (United States)

Revunova, Svetlana; Vlasenko, Vyacheslav; Bukreev, Anatoly

2017-10-01

The article proposes the models of innovative activity development, which is driven by the formation of “points of innovation-driven growth”. The models are based on the analysis of the current state and dynamics of innovative development of construction enterprises in the transport sector and take into account a number of essential organizational and economic changes in management. The authors substantiate implementing such development models as an organizational innovation that has a communication genesis. The use of the communication approach to the formation of “points of innovation-driven growth” allowed the authors to apply the mathematical tools of the graph theory in order to activate the innovative activity of the transport industry in the region. As a result, the authors have proposed models that allow constructing an optimal mechanism for the formation of “points of innovation-driven growth”.

THE INTEGRATION INTERACTION OF PEDAGOGICAL HIGHER EDUCATION INSTITUTION AND SCHOOL IN DEVELOPMENT OF INNOVATIVE MODELS OF EDUCATION

Directory of Open Access Journals (Sweden)

Popov Pavel Pavlovich

2013-05-01

Full Text Available The article is devoted to an actual problem of integration interaction of educational institutions of various levels. The concepts of integration and pedagogical interaction are analyzed; the features and the intrinsic characteristics which are showing in modern conditions of a development of education are marked out in this article. The question of mechanisms of realization of integration interaction is designated there. The distance interactive courses devoted to development of innovative models of education are offered as one of the possible mechanisms of realization of integration interaction of pedagogical higher education institution and establishments of the general education. The development of innovative models of education is considered in two directions: on the one hand, the role of pedagogical higher education institution in the spread of innovations and rendering the methodical help to teachers in their development is allocated; on the other hand, the way of integration interaction, in particular, the use of Moodle environment and Adobe Connect system, can be considered as innovative. Possibilities of Moodle ("Modular object-oriented dynamic learning environment" as environments of distance learning which is intended for development and placement of training and methodical materials in the Internet/the Intranet network and the organization of educational process on their basis, and also Adobe Connect as flexible system of the distributed training and communication with use of technologies of the web communications, allowing to provide a possibility of teaching, training and collaboration at any distance on the Internet are characterized in the article. The feature of the research is design and realization of distance learning on the basis of a Moodle environment and Adobe Connect system combination in online modes and offline, use of interactive models of occupations. The results of research received during training of teachers at

Using Action Research to Assess and Advocate for Innovative School Library Design

Science.gov (United States)

Harper, Meghan; Deskins,Liz

2015-01-01

This article describes a collaborative project designed to use action research to assess and advocate for innovative design changes in a school library. The high school library was in its fifth year of service, and yet the layout of the library was not meeting the learning and technological needs of 21st-century high school students. The purpose…

Innovation Networks New Approaches in Modelling and Analyzing

CERN Document Server

Pyka, Andreas

2009-01-01

The science of graphs and networks has become by now a well-established tool for modelling and analyzing a variety of systems with a large number of interacting components. Starting from the physical sciences, applications have spread rapidly to the natural and social sciences, as well as to economics, and are now further extended, in this volume, to the concept of innovations, viewed broadly. In an abstract, systems-theoretical approach, innovation can be understood as a critical event which destabilizes the current state of the system, and results in a new process of self-organization leading to a new stable state. The contributions to this anthology address different aspects of the relationship between innovation and networks. The various chapters incorporate approaches in evolutionary economics, agent-based modeling, social network analysis and econophysics and explore the epistemic tension between insights into economics and society-related processes, and the insights into new forms of complex dynamics.

Innovation in a complex environment

Directory of Open Access Journals (Sweden)

René Pellissier

2012-02-01

Full Text Available Background: As our world becomes more global and competitive yet less predictable, the focus seems to be increasingly on looking to innovation activities to remain competitive. Although there is little doubt that a nation’s competitiveness is embedded in its innovativeness, the complex environment should not be ignored. Complexity is not accounted for in balance sheets or reported in reports; it becomes entrenched in every activity in the organisation. Innovation takes many forms and comes in different shapes.Objectives: The study objectives were, firstly, to establish the determinants for complexity and how these can be addressed from a design point of view in order to ensure innovation success and, secondly, to determine how this changes innovation forms and applications.Method: Two approaches were offered to deal with a complex environment – one allowing for complexity for organisational innovation and the other introducing reductionism to minimise complexity. These approaches were examined in a qualitative study involving case studies, open-ended interviews and content analysis between seven developing economy (South African organisations and seven developed economy (US organisations.Results: This study presented a proposed framework for (organisational innovation in a complex environment versus a framework that minimises complexity. The comparative organisational analysis demonstrated the importance of initiating organisational innovation to address internal and external complexity, with the focus being on the leadership actions, their selected operating models and resultant organisational innovations designs, rather than on technological innovations.Conclusion: This study cautioned the preference for technological innovation within organisations and suggested alternative innovation forms (such as organisational and management innovation be used to remain competitive in a complex environment. 

Innovated Conceptual Design of Loading Unloading Tool for Livestock at the Port

Science.gov (United States)

Mustakim, Achmad; Hadi, Firmanto

2018-03-01

The condition of loading and unloading process of livestock in a number of Indonesian ports doesn’t meet the principle of animal welfare, which makes cattle lose weight and injury when unloaded. Livestock loading and unloading is done by throwing cattle into the sea one by one, tying cattle hung with a sling strap and push the cattle to the berth directly. This process is against PP. 82 year 2000 on Article 47 and 55 about animal welfare. Innovation of loading and unloading tools design offered are loading and unloading design with garbarata. In the design of loading and unloading tools with garbarata, apply the concept of semi-horizontal hydraulic ladder that connects the ship and truck directly. This livestock unloading equipment design innovation is a combination of fire extinguisher truck design and bridge equipped with weightlifting equipment. In 10 years of planning garbarata, requires a total cost of IDR 321,142,921; gets benefits IDR 923,352,333; and BCR (Benefit-Cost Ratio) Value worth 2.88. BCR value >1 means the tool is feasible applied. The designs of this loading and unloading tools are estimated up to 1 hour faster than existing way. It can also minimize risks such as injury and also weight reduction livestock agencies significantly.

Design and performance of a novel innovative roofing system for tropical landed houses

International Nuclear Information System (INIS)

Al-Obaidi, Karam M.; Ismail, Mazran; Abdul Rahman, Abdul Malek

2014-01-01

Highlights: • Constructing a new design of sustainable roofing systems. • An innovative roofing system (IRS) for tropical landed houses is proposed. • Separate solar heat from useful natural light by physical form. • The IRS can maintain an illuminance level of approximately 86–100% below 2000 lux. • The IRS can reduce the attic air temperature by 5.4 °C and the indoor air temperature by 2.1 °C. - Abstract: An innovative roofing system (IRS) is designed to deliver an abundant and uniform amount of cool natural light from the roof with reduced heat gain effect for tropical residential buildings (3 m height) in Malaysia. Studies revealed that several passive and active solar techniques can be integrated to form a roofing system to separate solar heat from useful natural light at the attic zone before heat reaches the occupied space. The IRS design is specified and proposed by using glazing technology (polycarbonate), pigment technique (reflective and radiative), as well as ventilation process (hybrid turbine ventilator) applied at the attic zone to represent a new model of sustainable roofing design. The aim of this research is to demonstrate the effectiveness of the design concept without the need for any chemical, complex, or expensive solar design techniques. The methodology was conducted on a series of field studies in a standard room model at Universiti Sains Malaysia. Three different roofing systems are investigated to identify the IRS performance in both dark and daylight conditions to determine the effect of natural light on the indoor environment. The outcomes of the design show that the IRS was able to reduce the indoor air temperature compared with conventional roofing system by approximately 2.1 °C under daylight condition. Results showed that the difference in the IRS (daylight–dark) condition was 0.31 °C compared to that in the conventional roofing system at 0.8 °C. Furthermore, the level of mean radiant temperature compared with

New perspectives on design and innovation

DEFF Research Database (Denmark)

Alting, Leo; Clausen, Christian; Jørgensen, Ulrik

2007-01-01

The paper reflects on research perspectives dealing with the incorporation of knowledge on use, users, customers and market in the entire innovation process. The point will be made that the support of user oriented innovation processes will have to deal with development of new approaches, methods...

Recent Innovations in Small-N Designs for Research and Practice in "Professional School Counseling"

Science.gov (United States)

McDougall, Dennis; Smith, Douglas

2006-01-01

This article illustrates an innovative small-N research design that researchers and practitioners can use to investigate questions of interest in "professional school counseling." The distributed criterion (DC) design integrates elements of three classic small-N research designs--the changing criterion, reversal, and multiple baseline. The DC…

Agent-based Modeling Automated: Data-driven Generation of Innovation Diffusion Models

NARCIS (Netherlands)

Jensen, T.; Chappin, E.J.L.

2016-01-01

Simulation modeling is useful to gain insights into driving mechanisms of diffusion of innovations. This study aims to introduce automation to make identification of such mechanisms with agent-based simulation modeling less costly in time and labor. We present a novel automation procedure in which

BUSINESS MODEL IN THE HOSPITALITY INDUSTRY, FROM TRADITIONAL TO OPEN INNOVATION

Directory of Open Access Journals (Sweden)

Mihaela DIACONU

2017-07-01

Full Text Available The paper highlights the importance of information and communication technology in valorising the behavior of the tourism consumer by including it in new business models.The business model is considered a form of innovation to gain value for all stakeholders in the hospitality industry. On the basis of the very rich specialty literature, the paper presents the particularities of the model of hospitality industry, both the traditional model and the innovative business model.

Business Model Innovation: A Blueprint for Higher Education

Science.gov (United States)

Flanagan, Christine

2012-01-01

Business model innovation is one of the most challenging components of 21st-century leadership. Making incremental improvements to a business model--creating new efficiencies, expanding into adjacent markets--is hard enough. Developing and experimenting with new business models that truly transform how an institution delivers value (while…

Strengthening regional innovation through network-based innovation brokering

OpenAIRE

Svare, Helge; Gausdal, Anne Haugen

2015-01-01

The primary objective of this paper is to demonstrate how regional innovation system theory may be translated into manageable micro-level methods with the potential for strengthening the productive dynamics of a regional innovation system. The paper meets this objective by presenting network-based innovation brokering (NBIB), a practical method designed using insights from regional innovation system theory and trust theory. Five cases from two Norwegian regional innovation networks show that ...

Facilitating Quintuple helix innovation with urban living labs

OpenAIRE

Baccarne, Bastiaan; Schuurman, Dimitri; De Marez, Lieven

2015-01-01

This paper discusses the Urban Living Lab approach as a way to put the Quintuple Helix model for innovation into practice. In this analysis we focus on the concepts innovation democracy, ‘mode 3’ knowledge production, the innovation ecosystem as a system of societal subsystems and socioecological transition. The empirical analysis is performed by means of a multidimensional case study design, applied on a project-based ad hoc collaborative innovation development process in an ecological doma...

Innovative supply chain optimization models with multiple uncertainty factors

DEFF Research Database (Denmark)

Choi, Tsan Ming; Govindan, Kannan; Li, Xiang

2017-01-01

Uncertainty is an inherent factor that affects all dimensions of supply chain activities. In today’s business environment, initiatives to deal with one specific type of uncertainty might not be effective since other types of uncertainty factors and disruptions may be present. These factors relate...... to supply chain competition and coordination. Thus, to achieve a more efficient and effective supply chain requires the deployment of innovative optimization models and novel methods. This preface provides a concise review of critical research issues regarding innovative supply chain optimization models...

Status of innovative small and medium sized reactor designs 2005. Reactors with conventional refuelling schemes

International Nuclear Information System (INIS)

2006-03-01

There is a renewed interest in Member States in the development and application of small and medium sized reactors (SMRs). In the near term, most new NPPs are likely to be evolutionary designs building on proven systems while incorporating technological advances and often the economics of scale, resulting from the reactor outputs of up to 1600 MW(e). For the longer term, the focus is on innovative designs aiming to provide increased benefits in the areas of safety and security, non-proliferation, waste management, resource utilization and economy, as well as to offer a variety of energy products and flexibility in design, siting and fuel cycle options. Many innovative designs are reactors within the small-to-medium size range, having an equivalent electric power less than 700 MW(e) or even less than 300 MW(e). The projected timelines of readiness for deployment are generally between 2010 and 2030. The objective of this report is to provide Member States, including those just considering the initiation of nuclear power programmes, and those already having practical experience in nuclear power, with a balanced and objective information on important development trends and objectives of innovative SMRs for a variety of uses, on the achieved state-of-the-art in design and technology development for such reactors and on their design and regulatory status. The report is intended for many categories of stakeholders, including regulators, electricity producers, designers, non-electrical producers and policy makers. The main chapters of this report, addressed to all abovementioned groups of stakeholders, provide a summary of major specifications, applications and user-related special features of innovative SMRs, outline the achieved design and regulatory status and its progress since previous IAEA publications, review targeted deployment dates, fuel cycle options, design approaches used to meet design objectives in specific subject areas, enabling technologies and current

Using Diffusion of Innovation Theory to Promote Universally Designed College Instruction

Science.gov (United States)

Scott, Sally; McGuire, Joan

2017-01-01

Universal Design applied to college instruction has evolved and rapidly spread on an international scale. Diffusion of Innovation theory is described and used to identify patterns of change in this trend. Implications and strategies are discussed for promoting this inclusive approach to teaching in higher education.

Business Model Innovation for Local Energy Management: A Perspective from Swiss Utilities

Energy Technology Data Exchange (ETDEWEB)

Facchinetti, Emanuele, E-mail: emanuele.facchinetti@hslu.ch [Lucerne Competence Center for Energy Research, Lucerne University of Applied Science and Arts, Horw (Switzerland); Eid, Cherrelle [Faculty of Technology, Policy and Management, Delft University of Technology, Delft (Netherlands); Bollinger, Andrew [Urban Energy Systems Laboratory, EMPA, Dübendorf (Switzerland); Sulzer, Sabine [Lucerne Competence Center for Energy Research, Lucerne University of Applied Science and Arts, Horw (Switzerland)

2016-08-04

The successful deployment of the energy transition relies on a deep reorganization of the energy market. Business model innovation is recognized as a key driver of this process. This work contributes to this topic by providing to potential local energy management (LEM) stakeholders and policy makers a conceptual framework guiding the LEM business model innovation. The main determinants characterizing LEM concepts and impacting its business model innovation are identified through literature reviews on distributed generation typologies and customer/investor preferences related to new business opportunities emerging with the energy transition. Afterwards, the relation between the identified determinants and the LEM business model solution space is analyzed based on semi-structured interviews with managers of Swiss utilities companies. The collected managers’ preferences serve as explorative indicators supporting the business model innovation process and provide insights into policy makers on challenges and opportunities related to LEM.

Business Model Innovation for Local Energy Management: A Perspective from Swiss Utilities

International Nuclear Information System (INIS)

Facchinetti, Emanuele; Eid, Cherrelle; Bollinger, Andrew; Sulzer, Sabine

2016-01-01

The successful deployment of the energy transition relies on a deep reorganization of the energy market. Business model innovation is recognized as a key driver of this process. This work contributes to this topic by providing to potential local energy management (LEM) stakeholders and policy makers a conceptual framework guiding the LEM business model innovation. The main determinants characterizing LEM concepts and impacting its business model innovation are identified through literature reviews on distributed generation typologies and customer/investor preferences related to new business opportunities emerging with the energy transition. Afterwards, the relation between the identified determinants and the LEM business model solution space is analyzed based on semi-structured interviews with managers of Swiss utilities companies. The collected managers’ preferences serve as explorative indicators supporting the business model innovation process and provide insights into policy makers on challenges and opportunities related to LEM.

DESIGNING CURRICULUM, CAPACITY OF INNOVATION, AND PERFORMANCES: A STUDY ON THE PESANTRENS IN NORTH SUMATRA

Directory of Open Access Journals (Sweden)

Jafar Syahbuddin Ritonga

2016-06-01

Full Text Available Desain Kurikulum, Kemampuan Inovasi dan Performa: Studi Pesantren di Sumatera Utara. There have been many articles and studies on Pesantren that have been published. Unfortunately, Almost all of them discuss about the Pesantren from the perspective of Islam exclusively. This paper tries to offer a new perspective in looking at the Pesantren: as an entity of business. This is a research paper which aims to know how Pesantrens’ performances are influenced by designing curriculum at different levels of capacity of innovation. The data are analyzed using descriptive and inferential statistics, namely frequency, multiple regressions and hierarchical regression. This paper analyzes the influence of designing the curriculum on performances of the Pesantren and the important effects of capacity of innovation on them. This paper reveals that the influence of designing modern Islamic currciculum to the Pesantren’s performances is expected to be varied according to the levels of capacity of innovation at the Pesantren.

Participatory innovation through user-designed knowledge sharing and Web2.0 in the Danish seed industry

DEFF Research Database (Denmark)

Tveden-Nyborg, Svend; Boelt, Birte; Misfeldt, Morten

seed scientists from Aarhus University will work together with seed growers and seed company consultants in designing a collaborative knowledge platform to optimise the diffusion of innovation between them. The aim of the Ph.D. project is to look at the processes within the three communities......For many years the Danish seed industry has been at the forefront with high quality seed production, but in a rapidly changing global market innovation is a key factor for the future of Danish seed production - one important element to innovation is transfer of knowledge. In a new Ph.D. project...... of practice in their participatory efforts to design and select technologies that will improve their knowledge dissemination through a shared understanding of learning and innovation within the Danish seed industry. The research questions are: •What boundary objects emerge between and within the collaborating...

Participatory innovation through user-designed knowledge sharing and Web2.0 in the Danish seed industry

DEFF Research Database (Denmark)

Tveden-Nyborg, Svend; Boelt, Birte; Misfeldt, Morten

2010-01-01

For many years the Danish seed industry has been at the forefront with high quality seed production, but in a rapidly changing global market innovation is a key factor for the future of Danish seed production - one important element to innovation is transfer of knowledge. In a new Ph.D. project...... seed scientists from Aarhus University will work together with seed growers and seed company consultants in designing a collaborative knowledge platform to optimise the diffusion of innovation between them. The aim of the Ph.D. project is to look at the processes within the three communities...... of practice in their participatory efforts to design and select technologies that will improve their knowledge dissemination through a shared understanding of learning and innovation within the Danish seed industry. The research questions are: •What boundary objects emerge between and within the collaborating...

A model of the supplier involvement in the product innovation

Directory of Open Access Journals (Sweden)

Kumar Manoj

2017-01-01

Full Text Available In this paper we examine the product innovation in a supply chain by a supplier and derive a model for a supplier’s product innovation policy. The product innovation of a supplier can contribute to the long-term competitiveness for the supply chain, and as it is for many supply chains a major factor, it should be considered in the development of strategies for a supplier. Here, we evaluate the effectiveness of supplier product innovation as a strategic tool to enhance the competitiveness and viability of supply chain. This paper explores the dynamic research performance of a supplier with endogenous time preference under a given arrangement of product innovation. We find that the optimal effort level and the achieved product innovation obey a saddle point path, or show tremendous fluctuations even without introducing the stochastic nature of product innovative activity. We also find that the fluctuation frequency is largely dependent both on the supplier’s characteristics such as supplier’s product innovative ability and on the nature of product innovation process per se. Short-run analyses are also made on the effect of supply chain cooperation in the product innovation process.

Innovative design of viscoelastic dampers for seismic mitigation

International Nuclear Information System (INIS)

Tsai, C.S.

1993-01-01

In this paper, an advanced and more reliable design of viscoelastic dampers for seismic mitigation of high-rise buildings is presented. The innovative design of energy-absorbing devices has some advantages, compared to the classical design, as follows: One, the device is directly subjected to shear strains and forces due to story drifts; two, the device can support its own weight during normal operations, and maintain stable for large deformations during earthquakes; three, the device can reduce the responses of a structure to horizontal as well as vertical seismic loadings; and four, the device can also decrease the responses of the floor system of a building. In this study, a ten-story building is given as an example to express the merits obtained from the new system. Comparisons of the building equipped with classical and proposed devices of viscoelastic dampers are carefully studied. Numerical results show that the energy-absorbing capacity of the new device is superior to the classical one, especially for vertical vibrations. (orig.)

Innovating urinary catheter design: An introduction to the engineering challenge.

Science.gov (United States)

Murphy, Cathy

2018-05-01

Every day, people around the world rely on intermittent and indwelling urinary catheters to manage bladder dysfunction, but the potential or actual harm caused by these devices is well-recognised. Current catheter designs can cause urinary tract infection and septicaemia, bladder and urethral trauma and indwelling devices frequently become blocked. Furthermore, the devices can severely disrupt users' lives, limiting their daily activities and can be costly to manage for healthcare providers. Despite this, little significant design innovation has taken place in the last 80 years. In this article current catheter designs and their limitations are reviewed, common catheter-associated problems are outlined and areas of design ripe for improvement proposed. The potential to relieve the individual and economic burden of catheter use is high.

Innovation

DEFF Research Database (Denmark)

Nielsen, Janni; Yaganeh, Suzanne; Bloch Rasmussen, Leif

2013-01-01

This paper contributes to a theoretical discussion of creation of innovation with participants in, or outside, organisations. We address the creation of innovation with a complex theoretical understanding drawing on the Scandinavian and the Participatory Design tradition introducing two approaches...... to the processes of innovation. We ask if innovation can be initiated and enhanced looking at two collaborative approaches; participatory innovation (PIN) and cooperative innovation (COIN). We invite to dialogue and reflections on PIN’s conflict and creative frictions on one side and COIN’s complexity......, complementarity in diversity and the didactic scaffolding of the innovation process on the other side. Our contribution focuses on the methods and practices for facilitation of co-creating activities between different groups leading to cooperation, and innovation in thinking....

Harnessing social innovation for energy justice: a business model perspective

OpenAIRE

Hiteva, Ralitsa; Sovacool, Benjamin

2017-01-01

This paper uses a business model framework to discuss how principles of energy justice - in particular, equitable distribution of costs and benefits, affordability, due process and greater participation in decision-making - can be embedded in business model innovations for energy, through social innovation. The paper discusses four cases at different scales (local, subnational, regional and global) to highlight opportunities for introducing principles of energy justice into the core of busine...

The collaboration between and contribution of a digital open innovation platform to a local design process

DEFF Research Database (Denmark)

del Castillo, Jacqueline; Bhatti, Yasser; Hossain, Mokter

2017-01-01

We examine the potential of an open innovation digital platform to expose a local innovation process to a greater number of ideas and a more inclusive set of stakeholders. To do so we studied an online innovation challenge on the OpenIDEO to reimagine the end-of-life experience sponsored by Sutte...... it leads to a greater number of ideas from a wider and more inclusive set of stakeholders. We offer insights for the literatures on open innovation and design thinking in a healthcare context....

Innovation and de facto standardization

DEFF Research Database (Denmark)

Brem, Alexander; Nylund, Petra; Schuster, Gerd

2016-01-01

investigate how the existence of a dominant design affects subsequent innovation in an industry. In particular, we study the influence on innovative performance, radical innovation, and process innovation. Analyzing longitudinal, cross-sectional patent data for more than 2.6 million patents filed from 1978...... to 2013, we find support for our hypotheses that an industry's innovative performance and degree of radical innovation are negatively influenced by dominant design in that industry, and that process innovation is fostered by the occurrence of a dominant design. We discuss the findings in the light...... of the increasing speed of technological development and standardization. Additionally, results from a sensitivity analysis for different threshold values of dominant design call for adjusting a binary definition of dominant design with different threshold values depending on the effects under study....

IAEA Technical Meeting on Innovative Heat Exchanger and Steam Generator Designs for Fast Reactors. Working Material

International Nuclear Information System (INIS)

2011-01-01

The IAEA, within the framework of its Nuclear Energy Department’s Technical Working Group on Fast Reactors (TWG-FR), assists Member States activities in fast reactors technology development areas by providing an umbrella for information exchange [topical Technical Meetings (TMs), Workshops and large Conferences] and collaborative R&D [Coordinated Research Projects (CRPs)]. The Technical meeting on “Innovative Heat Exchanger and Steam Generator Designs for Fast Reactors” was held from 21 – 22 December 2011 in Vienna, addressing Member States’ expressed needs of information exchange in the field of advanced fast reactor design features, with particular attention to innovative heat exchangers and steam generators. The Objective of the TM is to provide a global forum for in-depth information exchange and discussion on the most advanced concepts of heat exchangers and steam generators for fast reactors. More specifically, the objectives are: · Review of the status of advanced fast reactor development activities with special emphasis on design and performance of heat exchangers and steam generators; · Discuss requirements for innovative heat exchangers and steam generators; · Present results of studies and conceptual designs for innovative heat exchangers and steam generators; · Provide recommendations for international collaboration under the IAEA aegis. The meeting agenda of the meeting is in Annex I

ON THE ECONOMIC ESSENCE CONCEPT INNOVATION AND INNOVATION IN LAND TENURE

Directory of Open Access Journals (Sweden)

Tretyak A.M.

2016-08-01

Full Text Available Transformation processes that take place at the present stage in Ukraine's economy, connected with the formation of innovative development model, which is directly based on obtaining of the new scientific results and their technological implementation in production, зproviding a real GDP increase is mainly due to the production and sale of high technology products. It is characterized by the presence of government policy and legislation designed to stimulate of innovation processes, the prevalence of intellectual nature of work on industrial and integrated technologies. Therefore, in performing the tasks to ensure the dynamic development of the economy's primary role is played by innovation and innovation activities. Innovative economy (knowledge economy, intellectual economy – type of economy based on innovation stream, on constant technological improvement, in manufacturing and exporting of high technology products with a high added value and themselves technologies. It is assumed that this is mainly income creates intelligence of innovators and scientists, information sphere, rather than material production (industrial economy and not the concentration of finance (capital. Innovative Economy includes six main components: education; science; human capital, including high quality of life and highly qualified specialists; innovation systemthat includes legislative framework and material components of the innovation system (technology transfer centers, business incubators, technology parks, technopolises, innovation centers, clusters, territory of development of high technology venture business etc.; innovative industry that implements innovations; favorable environment of functioning of scientific and educational system, work and life of innovators. The number of major components of an effective innovation economy in land management can be reduced to four: high-quality scientific and educational system in the broad definition; effective

Innovation Network Development Model in Telemedicine: A Change in Participation.

Science.gov (United States)

Goodarzi, Maryam; Torabi, Mashallah; Safdari, Reza; Dargahi, Hossein; Naeimi, Sara

2015-10-01

This paper introduces a telemedicine innovation network and reports its implementation in Tehran University of Medical Sciences. The required conditions for the development of future projects in the field of telemedicine are also discussed; such projects should be based on the common needs and opportunities in the areas of healthcare, education, and technology. The development of the telemedicine innovation network in Tehran University of Medical Sciences was carried out in two phases: identifying the beneficiaries of telemedicine, and codification of the innovation network memorandum; and brainstorming of three workgroup members, and completion and clustering ideas. The present study employed a qualitative survey by using brain storming method. Thus, the ideas of the innovation network members were gathered, and by using Freeplane software, all of them were clustered and innovation projects were defined. In the services workgroup, 87 and 25 ideas were confirmed in phase 1 and phase 2, respectively. In the education workgroup, 8 new programs in the areas of telemedicine, tele-education and teleconsultation were codified. In the technology workgroup, 101 and 11 ideas were registered in phase 1 and phase 2, respectively. Today, innovation is considered a major infrastructural element of any change or progress. Thus, the successful implementation of a telemedicine project not only needs funding, human resources, and full equipment. It also requires the use of innovation models to cover several different aspects of change and progress. The results of the study can provide a basis for the implementation of future telemedicine projects using new participatory, creative, and innovative models.

Model-Based Design Tools for Extending COTS Components To Extreme Environments, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The innovation in this project is model-based design (MBD) tools for predicting the performance and useful life of commercial-off-the-shelf (COTS) components and...

The state of the art of innovation-driven business models in the financial services industry

NARCIS (Netherlands)

Lüftenegger, E.R.; Angelov, S.A.; Linden, van der E.; Grefen, P.W.P.J.

2010-01-01

Emerging innovation-driven business models are changing the financial services landscape. Most companies are using innovation to sustain their business models. However, new entrants into the financial services market innovate in a way that disrupts the industry. Typically, directions for innovation

Chasing Innovation: A Pilot Case Study of a Rhizomatic Design Thinking Education Program

Science.gov (United States)

Biffi, Alfredo; Bissola, Rita; Imperatori, Barbara

2017-01-01

Purpose: The purpose of this paper is to illustrate and discuss the main features and key challenges of an original post-graduate education program designed according to an innovative theoretical framework promoting design thinking in a rhizomatic approach. By involving different stakeholders, the aim of this entrepreneurship education program is…

The Innovative Capabilities Of Digital Payment Platforms

DEFF Research Database (Denmark)

Kazan, Erol

2015-01-01

This study presents a model for studying the innovative capabilities of digital payment platforms in regards to open innovation integration and commercialization. We perceive digital platforms as layered modular IT artifacts, where platform governance and the configuration of platform layers impact...... the support for open innovation. The proposed model has been employed in a comparative case study between two digital payment platforms: Apple Pay and Google Wallet. The findings suggest that digital payment platforms make use of boundary resources to be highly integrative or integratable, which supports...... the intended conjoint commercialization efforts. Furthermore, the architectural design of digital platforms impacts the access to commercialization, resulting to an exclusion or inclusion strategy in accessing value opportunities. Our findings contribute to the open innovation and digital platform literature...

Leveraging Resistance to Change and the Skunk Works Model of Innovation