WorldWideScience

Sample records for innovative building design

  1. User Driven Innovative Building Design

    DEFF Research Database (Denmark)

    Christiansson, Per; Sørensen, Kristian Birch; Steffensen, K. G.

    2009-01-01

    During recent years there has been an ever-increasing focus on the possibilities to change the building process to raise quality on the final building products as well as on the activities of actors involved in the building process. One reason for this interest is the new opportunities evolving due...... Space. In addition to these spaces there are supporting artifacts like Idea Bank and Good Story/Best Practice bank as well as Ontology containers and access to Communities of Practice and Interest. The project has so far validated the need for enhanced methods to involve end-users of buildings...

  2. Sustainable flexible process innovation. Towards a new building design approach

    NARCIS (Netherlands)

    Brand, G.J.W. van den; Quanjel, E.; Zeiler, W.

    2001-01-01

    Developers and investors ofresidential and office buildings are facing large risks. A yearly loss ofcapital of approximately 50 billion EURO can be reduced by improvement of the design process. The need for more sustainable and end user oriented buildings on a background ofthe dynamics ofever

  3. Design & Innovation

    DEFF Research Database (Denmark)

    Boelskifte, Per; Jørgensen, Ulrik

    2005-01-01

    The new design and innovation programme at DTU is challenging some of the standard concepts dominating most engineering educations. The programme, its background, context and basic educational ideas are presented and discussed in this paper. To build competences that match the need for innovative...... and design oriented engineers in industry and society has turned out to challenge a number of the standard – and often taken for granted – concepts in engineering education still dominated world wide by rather strict norms and concepts of learning that do not challenge the students creativity and innovative...

  4. Two innovative solutions based on fibre concrete blocks designed for building substructure

    Science.gov (United States)

    Pazderka, J.; Hájek, P.

    2017-09-01

    Using of fibers in a high-strength concrete allows reduction of the dimensions of small precast concrete elements, which opens up new ways of solution for traditional construction details in buildings. The paper presents two innovative technical solutions for building substructure: The special shaped plinth block from fibre concrete and the fibre concrete elements for new technical solution of ventilated floor. The main advantages of plinth block from fibre concrete blocks (compared with standard plinth solutions) is: easier and faster assembly, higher durability and thanks to the air cavity between the vertical part of the block, the building substructure reduced moisture level of structures under the waterproofing layer and a comprehensive solution to the final surface of building plinth as well as the surface of adjacent terrain. The ventilated floor based on fibre concrete precast blocks is an attractive structural alternative for tackling the problem of increased moisture in masonry in older buildings, lacking a functional waterproof layer in the substructure.

  5. Building an innovation factory.

    Science.gov (United States)

    Hargadon, A; Sutton, R I

    2000-01-01

    New ideas are the precious currency of the new economy, but generating them doesn't have to be a mysterious process. The image of the lone genius inventing from scratch is a romantic fiction. Businesses that constantly innovate have systematized the production and testing of new ideas, and the system can be replicated by practically any organization. The best innovators use old ideas as the raw materials for new ideas, a strategy the authors call knowledge brokering. The system for sustaining innovation is the knowledge brokering cycle, and the authors discuss its four parts. The first is capturing good ideas from a wide variety of sources. The second is keeping those ideas alive by playing with them, discussing them, and using them. Imagining new uses for old ideas is the third part--some knowledge brokers encourage cross-pollination by creating physical layouts that allow, or even force, people to interact with one another. The fourth is turning promising concepts into real services, products, processes, or business models. Companies can use all or part of the cycle. Large companies in particular desperately need to move ideas from one place to another. Some will want to build full-fledged consulting groups dedicated to internal knowledge brokering. Others can hire people who have faced problems similar to the companies' current problems. The most important lesson is that business leaders must change how they think about innovation, and they must change how their company cultures reflect that thinking.

  6. Integrating Innovation Skills in an Introductory Engineering Design-Build Course

    Science.gov (United States)

    Liebenberg, Leon; Mathews, Edward Henry

    2012-01-01

    Modern engineering curricula have started to emphasize design, mostly in the form of design-build experiences. Apart from instilling important problem-solving skills, such pedagogical frameworks address the critical social skill aspects of engineering education due to their team-based, project-based nature. However, it is required of the…

  7. Creative Building Design for Innovative Earth Science Teaching and Outreach (Invited)

    Science.gov (United States)

    Chan, M. A.

    2009-12-01

    Earth Science departments can blend the physical “bricks and mortar” facility with programs and educational displays to create a facility that is a permanent outreach tool and a welcoming home for teaching and research. The new Frederick Albert Sutton building at the University of Utah is one of the first LEED (Leadership in Energy and Environmental Design) certified Earth Science buildings in the country. Throughout the structure, creative architectural designs are combined with sustainability, artful geologic displays, and community partnerships. Distinctive features of the building include: 1) Unique, inviting geologic designs such as cross bedding pattern in the concrete foundation; “a river runs through it” (a pebble tile “stream” inside the entrance); “confluence” lobby with spectacular Eocene Green River fossil fish and plant walls; polished rock slabs; and many natural stone elements. All displays are also designed as teaching tools. 2) Student-generated, energy efficient, sustainable projects such as: solar tube lights, xeriscape & rock monoliths, rainwater collection, roof garden, pervious cement, and energy monitoring. 3) Reinforced concrete foundation for vibration-free analytical measurements, and exposed lab ceilings for duct work and infrastructure adaptability. The spectacular displays for this special project were made possible by new partnerships within the community. Companies participated with generous, in-kind donations (e.g., services, stone flooring and slabs, and landscape rocks). They received recognition in the building and in literature acknowledging donors. A beautiful built environment creates space that students, faculty, and staff are proud of. People feel good about coming to work, and they are happy about their surroundings. This makes a strong recruiting tool, with more productive and satisfied employees. Buildings with architectural interest and displays can showcase geology as art and science, while highlighting

  8. Building a design community for sustainable homes through configuration and open innovation

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff; Jespersen, Kristina Risom

    2009-01-01

    . Furthermore will an idea space collect and rate ideas from the users. Through a combination of technical and user driven innovation the design community will act as a learning tool for the users and producers and thereby facilitate the development of a market for sustainable homes.......This paper presents a development project which aims to create a market place for sustainable homes – around a design community where the uses and producers collectively can develop new energy efficient solutions and thereby reduce the emmisson of CO2. The core functionality of the design community...... is a configurator where the users based on the produceres templates can design their own home at a selected address visualizing and estimating the energy consumption, total cost, CO2 emission etc. All the designs will be collected and rated in a design space creating transparency over the market and technologies...

  9. User Driven Innovation in the Building Process

    DEFF Research Database (Denmark)

    Christiansson, Per; Sørensen, Kristian Birch; Rødtness, Mette

    2008-01-01

    During the late years there has been an ever-increasing focus on the possibilities to change the building process to raise quality on the final building products as well as the activities of actors involved in the building process. One reason for this interest is the new opportunities evolving du...... building design. A general methodological framework and meta ontology for Virtual Innovation in Construction is presented as well as findings from implementation of the method....... to introduction of advanced information and communication technology (ICT). The paper focuses on creative changes of the building process powered by user driven innovation activities. An overview of existing user driven innovation methodologies is given as well experiences from the ongoing Virtual Innovation...

  10. Designing collaborative policy innovation

    DEFF Research Database (Denmark)

    Agger, Annika; Sørensen, Eva

    2014-01-01

    Recent approaches to enhancing public innovation suffer from two shortcomings: They overemphasize competition as a driver of innovation and overlook the fact that public sector innovation involves policy innovation as well as service innovation. Drawing on governance research and innovation theory......, the chapter investigates the extent to which and how collaboration between politicians and relevant stakeholders can spur the formulation, implementation and diffusion of new innovative policies. A case study of a process of collaborative policy innovation in a Danish municipality shows that collaborative...... policy arenas do contribute to policy innovation but also that the degree to which they do so depends on the institutional design of these arenas....

  11. Innovation without Design?

    DEFF Research Database (Denmark)

    Pinheiro-Croisel, Rebecca; Hernes, Tor

    2012-01-01

    This paper explores innovation and social behaviourist theory in relation to sustainable urban projects in the highly institutionalized public sector (towns). Using empirical data from France, we examine the dynamics of a design process in which unexpected practices generated innovative urban...... into a movement of collective action, which presupposed the acquisition of a new identity. Ultimately, our objective is to combine social behaviourist theory and innovation theory and to facilitate innovative design in urban projects....

  12. Open Innovation and Organization Design

    Directory of Open Access Journals (Sweden)

    Michael Tushman

    2012-05-01

    Full Text Available Abernathy's (1978 empirical work on the automotive industry investigated relationships among an organization’s boundary (all manufacturing plants, its organizational design (fluid vs. specific, and its ability to execute product and/or process innovations.  Abernathy's ideas of dominant designs and the locus of innovation have been central to scholars of innovation, R&D, and strategic management. Similarly, building on March and Simon's (1958 concept of organizations as decision making systems, Woodward (1965, Burns and Stalker (1966, and Lawrence and Lorsch (1967 examined relationships among organizational boundaries, organization structure, and innovation in a set of industries that varied by technology and environmental uncertainty. These and other early empirical works have led a diverse group of scholars to develop theories about firm boundaries, organization design, and the ability to innovate.

  13. ICT-Supported end User Participation in Creative and Innovative Building Design

    DEFF Research Database (Denmark)

    Christiansson, Per; Dybro, U.; Svidt, Kjeld

    2010-01-01

    engineering and architectural companies. Experiences from design of the two companies’ new headquarters were used as input to method development and they have as well provided cases for method evaluations. The method supports user involvement in every phase of the design and construction process...

  14. New build: Materials, techniques, skills and innovation

    International Nuclear Information System (INIS)

    Glass, Jacqueline; Dainty, Andrew R.J.; Gibb, Alistair G.F.

    2008-01-01

    The transition to secure, sustainable, low-energy systems will have a significant effect on the way in which we design and construct new buildings. In turn, the new buildings that are constructed will play a critical role in delivering the better performance that would be expected from such a transition. Buildings account for about half of UK carbon dioxide (CO 2 ) production. So it is urgent to ensure that energy is used efficiently in existing buildings and that new building stock is better able to cope with whatever the future holds. Most energy used in buildings goes towards heating, lighting and cooling, but a growing percentage is consumed by domestic appliances, computers and other electrical equipment. Actual energy consumption is the product of a number of factors, including individual behaviours and expectations, the energy efficiency of appliances and the building envelope. This review focuses on the third of these, the building itself, and its design and construction. It discusses the issues faced by the construction industry today, suggesting that major changes are needed relating to materials, techniques, skills and innovation. It moves on to consider future advances to 2050 and beyond, including developments in ICT, novel materials, skills and automation, servitisation (the trend for manufacturers to offer lifetime services rather than simple products), performance measurement and reporting, and resilience. We present a vision of the new build construction industry in 2050 and recommendations for policy makers, industry organisations and construction companies

  15. Building innovative and creative character through mathematics

    Science.gov (United States)

    Suyitno, Hardi; Suyitno, Amin

    2018-03-01

    21st century is predicted as the century with rapid development in all aspects of life. People require creative and innovative character to exist. Specifically, mathematics has been given to students from the kindergarten until the middle school. Thus, building character through mathematics should begin since the early age. The problem is how to build creative and innovative character through mathematics education? The goal expected from this question is to build innovative and creative characters to face the challenges of the 21st century. This article discusses the values of mathematics, the values in mathematics education, innovative and creative character, and the integration of these values in teaching mathematics that support the innovative and creative character building, and applying the values in structurely programmed, measurable, and applicable learning activities.

  16. Designing Users/Designing Innovation

    DEFF Research Database (Denmark)

    The paper addresses issues of user conceptualisation and representation in the processes of designing and innovating artifacts and use-practices. It is informed by early as well as more recent insights from technology studies within the new sociology of technology (e.g. Akrich 1995, Bijker & Law...... and competencies. Characteristic of these projects are the interplay between the social and the technical dimensions in the process of product development, and the students are expected to apply socio-technical methodologies in their strategies. The students’ need to inform the design through iteratively...... themes ranging from user-oriented design to product redesign and workspace design, etc. It is expected that some of the insights gained from these projects may be related outside of the immediate context of the classroom, to inform the notion of competencies in engineering design and sociotechnical...

  17. UX Design Innovation

    DEFF Research Database (Denmark)

    Dove, Graham; Halskov, Kim; Forlizzi, Jodi

    2017-01-01

    be because it is a new and difficult design material. To better understand why we have witnessed little design innovation, we conducted a survey of current UX practitioners with regards to how new ML services are envisioned and developed in UX practice. Our survey probed on how ML may or may not have been...... a part of their UX design education, on how they work to create new things with developers, and on the challenges they have faced working with this material. We use the findings from this survey and our review of related literature to present a series of challenges for UX and interaction design research...... and education. Finally, we discuss areas where new research and new curriculum might help our community unlock the power of design thinking to re-imagine what ML might be and might do....

  18. Building Energy Efficiency through Innovative Thermodevices (BEEIT)

    Energy Technology Data Exchange (ETDEWEB)

    Ju, Y. Sungtaek [Univ. of California, Los Angeles, CA (United States); Dunn, Bruce [Univ. of California, Los Angeles, CA (United States); Pei, Qibing [Univ. of California, Los Angeles, CA (United States); Kim, C. -J. [Univ. of California, Los Angeles, CA (United States)

    2012-12-14

    This is the final scientific/technical report for the project "Compact MEMS Electrocaloric Cooling Module" sponsored by ARAPA-E as part of its Building Energy Efficiency through Innovative Thermodevices (BEEIT) program.

  19. Delivering construction projects using innovative building technologies

    CSIR Research Space (South Africa)

    Ampofo-Anti, Naalamkai

    2017-07-01

    Full Text Available . Figure 1: IBT delivery flowchart Proceedings 11th Built Environment Conference 6 th August – 8 th August 2017 Delivering construction projects using innovative building technologies Durban, South Africa 5. REFERENCES Ampofo-Anti, N...

  20. Energy Innovations for Healthy Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Bogucz, Edward A. [Syracuse Univ., NY (United States)

    2016-09-23

    Healthy buildings provide high indoor environmental quality for occupants while simultaneously reducing energy consumption. This project advanced the development and marketability of envisioned healthy, energy-efficient buildings through studies that evaluated the use of emerging technologies in commercial and residential buildings. The project also provided resources required for homebuilders to participate in DOE’s Builders Challenge, concomitant with the goal to reduce energy consumption in homes by at least 30% as a first step toward achieving envisioned widespread availability of net-zero energy homes by 2030. In addition, the project included outreach and education concerning energy efficiency in buildings.

  1. Brand-Building for Innovators

    Science.gov (United States)

    Sametz, Roger

    2015-01-01

    Not too many years ago, a school's brand just was. Few people used the "b" word. A college or university went about its business, became known for particular strengths and weaknesses, accrued what we would now call brand attributes over time (party school, really hard to get in to, innovative curriculum), and, through word of mouth and…

  2. Early Building Design

    DEFF Research Database (Denmark)

    Østergård, Torben; Jensen, Rasmus Lund; Maagaard, Steffen

    2017-01-01

    Highlights •Development of a design methodology that can handle the vast design space in early building design. •A global design space is modelled from extensive Monte Carlo simulations. •Sensitivity analysis methods applied to guide decision-makers. •Interactive visualizations help the multi-act...

  3. When innovative instructional designs are too innovative

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas; Wahl, Christian

    2015-01-01

    and it was developed to include, motivate and encourage the students to engage in more situated learning processes. The course is infamous for low attendance and for demotivating the students. The new instructional design utilized teacher-produced video-clips to qualify the students learning in the preparation...... for the lessons and new pedagogical activities during lessons to make the learning process more situated. The video-clips should also include more students through scaffolding the academic reading with video-clips. However, the outcome was not as planned. The students didn’t recognize the video......This paper presents a study of what happens when innovation of an instructional design is too innovative. The study investigates an implementation process of a new instructional design in nursing education. The new instructional design should be a step away for a functionalist approach to learning...

  4. Building National Innovation Platform in China

    DEFF Research Database (Denmark)

    Li, Jizhen; Deng, Quwen; Sørensen, Olav Jull

    2011-01-01

    The focus of the article is the "national innovation platform" that are being build in China to enhance interaction between stakeholders and encourage knowledge flows. The textile industry is used as an example to discuss suitablity and lay a foundation for theoretical reflections of the new...

  5. Integrated Building Design

    DEFF Research Database (Denmark)

    Heiselberg, Per

    In the first half of the 20th century, HVAC systems and artificial lighting were developed to meet indoor comfort needs. Before the introduction of mechanical systems, climate - not building style or appearance - was the major determinant of building form. Comfort was achieved through passive means...... and architectural features built into the design. However, with the advent of new technologies, architects were no longer constrained by the need to ensure that buildings had ample daylighting, remained airy and cool in the summer and warm in the winter. Since HVAC systems and artificial lighting could satisfy...

  6. Crowdsourcing for Innovation in the Danish Building Industry

    DEFF Research Database (Denmark)

    Kamstrup, Andreas; Holm Jacobsen, Peter

    The aim of this paper is to inquire into a digital platform designed and operated to create innovations within the Danish building industry. In the innovation literature this kind of new ICT is known as a crowdsourcing intermediary (Zogaj, Bretschneider, & Leimeister, 2014). The study is ongoing...... the platform dynamics as a novel form of competition and examine how the “open call” for innovative solutions unfolds in practice: We borrow terminology from the architectural competition (Kreiner, 2012), from economic sociology (Stark, 2011) and valuation theory (Karpik, 2010), and show 1) how assessment...

  7. Building theory through design

    DEFF Research Database (Denmark)

    Markussen, Thomas

    2017-01-01

    This chapter deals with a fundamental matter of concern in research through design: how can design work lead to the building of new theory? Controversy exists about the balance between theory and design work in research through design. While some researchers see theory production as the scientific...... hallmark of this type of research, others argue for design work being the primary achievement, with theory serving the auxiliary function of inspiring new designs. This paper demonstrates how design work and theory can be appreciated as two equally important outcomes of research through design. To set...... the scene, it starts out by briefly examining ideas on this issue presented in existing research literature. Hereafter, it introduces three basic forms in which design work can lead to theory that is referred to as extending theories, scaffolding theories and blending theories. Finally, it is discussed how...

  8. Building an integrative framework for national systems of innovation

    DEFF Research Database (Denmark)

    Wang, Yuandi; Zhou, Zhao

    2011-01-01

    development of functional view of national systems of innovation, and the effective approach. Design/methodology/approach – As a theoretical research paper, the paper reviews and analyses intensive literature on national system of innovation from the perspectives of functional, structural, and effectiveness......Purpose – This paper proposes a way to integrate three different analytical approaches into a consistent framework of national systems of innovation that can benefit academia and policy makers. The approaches include the traditional structural method of national systems of innovation, the new...... approaches. Findings – The paper argues that these three approaches reflect different perspectives of national systems of innovation. Instead of contradicting each other, they could be integrated into a coherent framework. Originality/value – The paper builds an integrative framework to bring different...

  9. The Exploration of Design Driven Innovation as a Dynamic Capability

    Directory of Open Access Journals (Sweden)

    Philips Kembaren

    2012-01-01

    Full Text Available Innovation enables companies to attain consistent organic growth that brings benefits to stakeholders. Designthinking approach in innovation has been emergent to be an alternative to technological development path inorder to generate competitive and successful product or service in the market place. Design driven innovationcombines functional and semantic dimensions of products or services in the marketplace. Previous researchhas recently revealed practices of design driven innovation in various industries. However, little is known tothe extent that companies in Indonesia practicing design driven innovation. A theoretical framework withperspective from dynamic capability theoretical lens and guided by Dubin’s theory building methodology isproposed to explain the constructs and role of design in the process of innovation. The research is expected tocontribute a new construct to the existing framework, namely construct that related to how we could assessthe value of the design-driven innovation output, perceived by the costumers.Keywords: design driven innovation, dynamic capabilities, theory building

  10. Radical Sustainable Innovation of office buildings

    DEFF Research Database (Denmark)

    Koch, Christian; Berker, Thomas; Koch-Ørvad, Nina

    2017-01-01

    by high degrees of newness in the entire life cycle. RSI should offer significant enhancements of known benefits, entirely new benefits, or substantial cost reductions, leading to the transformation of existing markets, the creation of sustainable growth, and global sustainability. Thus, if buildings were....../could be radically new. How to evaluate radicality is a major challenge. It is tentatively proposed, to use standards for sustainable office buildings. Standards are developed to accelerate the sustainable development but has to some extent come to constrain possibilities of radical innovation. As the criteria...... of newness is incorporated in standards, going beyond them, could be viewed as radical. Empirically a selection of international cases of office buildings with very high scores of BREEAM, LEED and DGNB are examined. Six selected cases were analysed more in detail, one of them, Geelens...

  11. Building Design Guidelines for Solar Energy Technologies

    Science.gov (United States)

    Givoni, B.

    1989-01-01

    There are two main objectives to this publication. The first is to find out the communalities in the experience gained in previous studies and in actual applications of solar technologies in buildings, residential as well as nonresidential. The second objective is to review innovative concepts and products which may have an impact on future developments and applications of solar technologies in buildings. The available information and common lessons were collated and presented in a form which, hopefully, is useful for architects and solar engineers, as well as for teachers of "solar architecture" and students in Architectural Schools. The publication is based mainly on the collection and analysis of relevant information. The information included previous studies in which the performance of solar buildings was evaluated, as well as the personal experience of the Author and the research consultants. The state of the art, as indicated by these studies and personal experience, was summarized and has served as basis for the development of the Design Guidelines. In addition to the summary of the state of the art, as was already applied in solar buildings, an account was given of innovative concepts and products. Such innovations have occurred in the areas of thermal storage by Phase Change Materials (PCM) and in glazing with specialized or changeable properties. Interesting concepts were also developed for light transfer, which may enable to transfer sunlight to the core areas of large multi story nonresidential buildings. These innovations may have a significant impact on future developments of solar technologies and their applications in buildings.

  12. Design Innovation and Fashion Cycles.

    OpenAIRE

    Pesendorfer, Wolfgang

    1995-01-01

    A model of fashion cycles is developed in which fashion is used as a signalling device in a "dating-game". We assume that there is a designer (monopolist) who can create new designs at a positive fixed cost and zero marginal cost. Designs are durable commodities. We show the existence of equilibria of the following form: Every T periods a new design is innovated. Over time the price of the design falls and it spreads to more and more agents. Once sufficiently many agents own the design it is ...

  13. Building a culture of innovation a practical framework for placing innovation at the core of your business

    CERN Document Server

    Beswick, Cris; Geraghty, Jo

    2015-01-01

    Being a truly innovative company is more than the dreaming up of new products and services by external consultants and internal taskforces. Staying one step ahead of the competition requires you to embed innovation into your organizational culture. Innovation needs to be embodied in everything that gets done by everyone who works there. By changing your organizational culture to one that supports innovation, you will remove the barriers that stop you responding quickly and agilely to changing market conditions and opportunities for growth. Building a Culture of Innovation presents a practical framework that you can follow to design and embed a culture of innovation in your business.The six-step Innovation Culture Change Framework offers a structured process to make change stick, from assessing your organization's innovation-readiness to leading a managed change process that will foster innovation at each level. It includes case studies from international organizations which have shifted their focus to an inno...

  14. Building Design & Construction - Sustainability

    Energy Technology Data Exchange (ETDEWEB)

    None

    2003-11-01

    Offers a brief history of green building; presents the results of a specially commissioned survey; and analyzes the chief trends, issues, and published research, based on interviews with dozens of experts and participants in green building.

  15. Development of Innovative Design Processor

    International Nuclear Information System (INIS)

    Park, Y.S.; Park, C.O.

    2004-01-01

    The nuclear design analysis requires time-consuming and erroneous model-input preparation, code run, output analysis and quality assurance process. To reduce human effort and improve design quality and productivity, Innovative Design Processor (IDP) is being developed. Two basic principles of IDP are the document-oriented design and the web-based design. The document-oriented design is that, if the designer writes a design document called active document and feeds it to a special program, the final document with complete analysis, table and plots is made automatically. The active documents can be written with ordinary HTML editors or created automatically on the web, which is another framework of IDP. Using the proper mix-up of server side and client side programming under the LAMP (Linux/Apache/MySQL/PHP) environment, the design process on the web is modeled as a design wizard style so that even a novice designer makes the design document easily. This automation using the IDP is now being implemented for all the reload design of Korea Standard Nuclear Power Plant (KSNP) type PWRs. The introduction of this process will allow large reduction in all reload design efforts of KSNP and provide a platform for design and R and D tasks of KNFC. (authors)

  16. Innovating Business with Pinball Designs

    DEFF Research Database (Denmark)

    Buur, Jacob; Gudiksen, Sune Klok

    Many companies see the need to rethink their ways of doing business, in particular under the pervasive influence of Internet business. Design can play a prominent role here, as a way of expanding from a linear, rational conception of business model development. But rather than proposing ‘design...... business models’ – for example in the form of pinball-like contraptions – encourage participants to play with hypotheses and experiment with scenarios as a way of innovating business models. In a sense this is ‘design thinking’ with hands and body....... thinking’ as an abstract approach, this paper shows how design materials (as used routinely in the design profession), when introduced in a business context can engage a cross-disciplinary circle of stakeholders and challenge them to reconsider their business assumptions. We will show how ‘tangible...

  17. Designers as Determinant for Aesthetic Innovations

    DEFF Research Database (Denmark)

    Fjællegaard, Cecilie Bryld; Beukel, Karin; Alkærsig, Lars

    2015-01-01

    The innovation literature states that scientists are core ingredients in creating technological innovations. This paper investigates whether the hiring of a designer generates aesthetic innovations by a firm. Further we investigate what the level of design knowledge of the receiving firm means...... for the firms? absorptive capacity, in terms of turning the hiring of the designer into aesthetic innovations. We explore a unique dataset containing information on firms, their hiring of designers and aesthetic innovations measured by design applications (design patents). Our findings show that hiring...... a designer does increase firms? likelihood of producing aesthetic innovations. Secondly, firms with prior experience of aesthetic innovations are more likely to apply for design registrations. Thirdly, there is a positive moderating effect of firms with prior experience of generating aesthetic innovations...

  18. Social Innovation Systems for Building Resilient Communities

    Directory of Open Access Journals (Sweden)

    Donagh Horgan

    2018-02-01

    Full Text Available Social innovation—while not a new practice in itself—has re-emerged since the global financial crisis in 2008 as an approach to solving our collective intractable global challenges. Despite its renewed popularity, there is no common definition for the phenomenon, not least in the context of its application when planning the built environment or civic infrastructures. This paper seeks to position the practice of social innovation as a means for holistic collaboration between disciplines to develop sustainable social ecologies and systems that provide for resilient communities. It tests a hypothesis that social innovation develops over phases (feedback loops—that of the network, framework and architecture phase—to design for social, environmental and economic resilience. It looks to theories emerging in other subject areas like sociology and technology, that can inform its application in a planning context, such as Actor-Network and Adaptive Complexity theories. It explores the mechanisms that provide for resilience through action research and engagement with a number of international case studies and scenarios. Lastly, the paper identifies further avenues of research pertaining to networks, frameworks and architectures to develop models of best practice for inclusive, sustainable and iterative community development.

  19. Designers as the Determinants of Aesthetic Innovations

    DEFF Research Database (Denmark)

    Alkærsig, Lars; Fjællegaard, Cecilie Bryld; Beukel, Karin

    the growing interest of firms in aesthetic innovations, knowledge on the ir determinants is limited. Work on labor mobility with in the innovation studies literature focuses mainly on discussion of scientists as crucial for creating technological innovations. This paper adds to work on labor mobility......Aesthetic innovations have become increasingly important appropriation mechanisms for firms. Since 2003, the number of design patent applications (to protect aesthetic innovations) has tripled compared to doubling in the numbers of both patent and trademark applications. However, despite...... and innovation by examining whether this holds in the case of designers' mobility and aesthetic innovations. Does the hiring of a new designer generate more aesthetic innovations than in a matched firm, which does not hire a designer? What is the importance of prior experience with aesthetic innovation...

  20. Energy Efficiency Building Systems Regional Innovation Cluster Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Krebs, Martha [Pennsylvania State Univ., University Park, PA (United States)

    2016-07-29

    The Consortium for Building Energy Innovation (CBEI) was established through a Funding Opportunity Announcement led by the U.S. Department of Energy, under a cooperative agreement managed by the National Energy Technology Laboratory. CBEI is led by The Pennsylvania State University and is composed of partners from academia, the private sector, and economic development agencies. The Consortium has included as many as 24 different partners over the five years, but 14 have been core to the work over the five year cooperative agreement. CBEI primarily focused on developing energy efficiency solutions for the small and medium commercial building market, with a focus on buildings less than 50,000 square feet. This market has been underserved by the energy efficiency industry, which has focused on larger commercial buildings where the scale of an individual retrofit lends itself to the use of sophisticated modeling tools and more advanced solutions. Owners/operators and retrofit providers for larger buildings have a greater level of understanding of, and experience with different solutions. In contrast, smaller commercial building retrofits, like residential retrofits, often have owners with less knowledge about energy management and less time to learn about it. This market segment is also served by retrofit providers that are smaller and often focused on particular building systems, e.g. heating, ventilation and air conditioning (HVAC), lighting, roofing, or insulation. The size of a smaller commercial building retrofit does not lend itself, from a cost perspective, to the application of multiple, sophisticated design and modeling tools, which means that they are less likely to have integrated solutions.

  1. Building America Top Innovations 2012: Attic Air Sealing Guidelines

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-01-01

    This Building America Top Innovations profile describes the DOE-sponsored Guide to Attic Air Sealing by Building America research partner Building Science Corporation, which provides best practices for attic air sealing. The guide has had 21,000 views and 13,000 downloads since it was posted.

  2. Design innovativeness and product sales' evolution

    OpenAIRE

    Rubera, Gaia

    2015-01-01

    In the last decade, design innovation has gained increasing prominence in the marketplace, with a growing number of firms innovating not only through technology but also through novel product forms (i.e., design). However, while the effect of technological innovation on product sales is a heavily studied topic, a defining theory of how design innovation influences product sales is still missing. This paper provides demand- and supply-side theories to formulate a set of coherent hypothes...

  3. Building Innovation Subsidiaries in Emerging Markets

    DEFF Research Database (Denmark)

    Pogrebnyakov, Nicolai; Kristensen, Jonas D.

    2011-01-01

    Innovation subsidiaries increasingly follow manufacturing subsidiaries into emerging markets. Compared to well-established Western economies, emerging markets present unique challenges for the development of innovation management capabilities at subsidiaries. This paper distinguishes between...... multinational pharmaceutical company, Novo Nordisk. Lessons learned include assigning the subsidiary responsibility for a self-contained piece of work while maintaining a central R&D function, balancing local and in-company management, using local innovation talent, and educating new hires into the company...

  4. Designers as determinants for aesthetic innovation

    DEFF Research Database (Denmark)

    Fjællegaard, Cecilie Bryld; Beukel, Karin; Alkærsig, Lars

    The innovation literature states that scientists are core ingredients in creating technological innovations. This paper investigates whether the hiring of a designer generates aesthetic innovations by a firm. Further we investigate what the level of design knowledge of the receiving firm means fo...

  5. Energy simulation in building design

    NARCIS (Netherlands)

    Hensen, J.L.M.

    1992-01-01

    Design decision support related to building energy consumption and / or indoor climate, should be based on an integral approach of environment, building, heating, ventilating and airconditioning (HVAC) system and occupants. The tools to achieve this are now available in the form of computer

  6. System approach to machine building enterprise innovative activity management

    Directory of Open Access Journals (Sweden)

    І.V. Levytska

    2016-12-01

    Full Text Available The company, which operates in a challenging competitive environment should focus on new products and provide innovative services that enhance their innovation to maintain the company’s market position. The article deals with the peculiarities of such an activity in the company. The authors analyze the various approaches used in the management, and supply the advantages and disadvantages of each. It is determine that the most optimal approach among them is a system approach. The definition of the consepts "a system" and "a systematic approach to innovative activity management" are suggested. The article works out the system of machine building enterprise innovative activity management, the organization of machine building enterprise innovative activity; the planning of machine building enterprise innovative activity; the control in the system of machine building enterprise innovative activity management; the elements of the control subsystem. The properties, typical for the system of innovative management, are supplied. The managers, engaged in enterprise innovative activity management, must perform a number of the suggested tasks, which affect the efficiency of the enterprise as a whole. These exact tasks are performed using the systematic approach, providing the enterprise competitive operation and quick adaptation to changes in the external environment.

  7. Designing the design at JPL'S innovation foundary

    Science.gov (United States)

    Balint, Tibor S.; Freeman, Anthony

    2017-08-01

    NASA is a dynamic and living organization. Looking at it through the optics of cybernetics, we can describe it as an autopoietic system. It has to sustain itself, and compete successfully to be viable. Its organizational elements have to interact with the broader environment by maintaining and improving its processes that generate the means for future sustainability. It also needs to bring up follow-on generations who are not simply aligning with the status quo, but also improve the system's viability. For government-run programs, organizational, programmatic and project management practices are often rigidly linear. They can be characterized as observed first-order cybernetic systems, where the paradigm is bound by well-established requirements. At the implementation level this does not readily accommodate flexibility and change. To address this, broadening the system's worldview is needed from the strategic level. This corresponds to an observing second-order cybernetic system, where strategic leadership can overwrite the rules of a first-order system. Changing the worldview of an organization can be complex and face much resistance. Still, with the appropriate strategic-level support, it can be achieved by introducing novel languages, new perspectives, and adding new disciplines to existing ones. In effect, this helps to broaden the organizational paradigm, and subsequently influence its mission, impact the culture, and open up its core processes. These changes can be effectively introduced through design conversations in the early formulation stages, when new ideas are conceived. Within NASA's Jet Propulsion Laboratory, early-stage concept developments are performed at a specially formulated environment, called the Innovation Foundry. Within this office, a continuous effort is being made on designing the design processes, which helps to broaden the variety of the option trades. It is achieved by an added focus on conversations and the inclusion of non

  8. Building a Healthcare System's Innovation Program.

    Science.gov (United States)

    Conger, Michelle D

    2016-01-01

    OSF HealthCare, based in Peoria, Illinois, has developed an innovative strategy to adapt to the changes and forces disrupting the healthcare environment. This strategy evolved organically from the performance improvement efforts we began more than 15 years ago, as well as from the lessons we learned from years of research into the innovative practices and platforms of other healthcare institutions and of companies in other industries. More important, the strategy reflects our mission "to serve persons with the greatest care and love."The OSF innovation model has three components: internal innovations, partnering with external entities, and validating innovations through simulation. OSF has an ongoing and comprehensive commitment to innovation. Examples include our initiative to transform our model of care in primary care clinics by expanding access, reducing costs, and increasing efficiency; our partnerships with outside entities to find revolutionary solutions and products in which we can invest; and our establishment of a world-class simulation and education center.OSF HealthCare could not do any of this if it lacked the support of its people. To that end, we continue to work on embedding a culture of innovation across all of our facilities. Ours is a culture in which everyone is encouraged to voice creative ideas and no one is afraid to fail-all for the betterment of our organization and the patients we serve.

  9. Innovative model of business process reengineering at machine building enterprises

    Science.gov (United States)

    Nekrasov, R. Yu; Tempel, Yu A.; Tempel, O. A.

    2017-10-01

    The paper provides consideration of business process reengineering viewed as amanagerial innovation accepted by present day machine building enterprises, as well as waysto improve its procedure. A developed innovative model of reengineering measures isdescribed and is based on the process approach and other principles of company management.

  10. Overcoming Barriers to Innovation in the Building Industry

    NARCIS (Netherlands)

    Heintz, J.L.; Wamelink, J.W.F.

    2015-01-01

    We live in an era of accelerated innovation. All around us we are immersed in a sea of new technologies and products that were very recently confined to comic books and science fiction tv-series. Yet in this storm of innovation the building industry seems to stand out for it's committed old

  11. Building a Future for Technological Innovation

    Science.gov (United States)

    2010-08-17

    Higher Education 26% 27% 30% 31% 41% 46% 117% France EU-25 UK Australia Ireland S. Korea Poland 7 6 5 4 3 2 1 3%U.S.15 2010 UN Index rankings jumped...breakthroughs in health IT • Address scientific “grand challenges” Promote Competitive Markets that Spur Productive Entrepreneurship • Promote... entrepreneurship • Improve public sector innovation and support community innovation Source: http://www.whitehouse.gov/administration/eop/nec/reports

  12. Design Principles of Open Innovation Concept – Universal Design Viewpoint

    OpenAIRE

    Mustaquim, Moyen; Nyström, Tobias

    2013-01-01

    The concept of open innovation is becoming an increasingly popular topic of interest and seems to promise a lot in organizational development. However, to date there are no certain design principles that can be followed by organizations on how to use open innovation successfully. In this paper seven design principles of open innovation concept have been proposed. The derived principles are the outcome which is based on the principles of universal design. The open innovation design, based on t...

  13. Chapter 4: Lateral design of cross-laminated timber buildings

    Science.gov (United States)

    John W. van de Lindt; Douglas Rammer; Marjan Popovski; Phil Line; Shiling Pei; Steven E. Pryor

    2013-01-01

    Cross-laminated timber (CLT) is an innovative wood product that was developed approximately two decades ago in Europe and has since been gaining in popularity. Based on the experience of European researchers and designers, it is believed that CLT can provide the U.S. market the opportunity to build mid- and high-rise wood buildings. This Chapter presents a summary of...

  14. Improving Design with Open Innovation

    DEFF Research Database (Denmark)

    Christiansen, John K.; Gasparin, Marta; Varnes, Claus

    2013-01-01

    of the best practices for open innovation. However, projects were not equally successful. The outcome seems to be highly influenced by the type of collaborative arrangements used and their application. In particular, the analysis indicates that organizational factors seem to be indicative but not sufficient...... in open innovation need both a broad knowledge of the various potential elements of an open innovation effort and a flexible attitude toward their application. INSET: Summary of Projects....

  15. Building bridges for innovation in ageing

    DEFF Research Database (Denmark)

    Bousquet, J; Bewick, M; Cano, A

    2017-01-01

    The Strategic Implementation Plan of the European Innovation Partnership on Active and Healthy Ageing (EIP on AHA) proposed six Action Groups. After almost three years of activity, many achievements have been obtained through commitments or collaborative work of the Action Groups. However, they h...

  16. Sustainable Building Life Cycle Design

    Directory of Open Access Journals (Sweden)

    Ginzburg Alexander

    2016-01-01

    Full Text Available The current building life cycle management system in the Russian Federation is a family of discrete subsystems that exist independently for different building life cycle stages. In this situation building reliability and sustainable functioning are out of the question. The implementation of a united information model (BIM-model intended to describe building entire life cycle will allow to raise the sustainability, but this will happen only if goals and concerns of all participants of the project process are properly coordinated. An important figure of process sustainability is the organizational and technological reliability (OTR that describes the possibility of a system to reach a goal. In case of building life cycle design, the economical efficiency of a building can be considered as the goal. The required technical, ecological, organizational, and other parameters form a complex of constraints that determine the area of allowable values for building functioning. In its broad meaning, OTR may be understood as the probability of receiving an economical effect based on the value of organizational and economical reliability (OER.

  17. Innovation and design approaches within prospective ergonomics.

    Science.gov (United States)

    Liem, André; Brangier, Eric

    2012-01-01

    In this conceptual article the topic of "Prospective Ergonomics" will be discussed within the context of innovation, design thinking and design processes & methods. Design thinking is essentially a human-centred innovation process that emphasises observation, collaboration, interpretation, visualisation of ideas, rapid concept prototyping and concurrent business analysis, which ultimately influences innovation and business strategy. The objective of this project is to develop a roadmap for innovation, involving consumers, designers and business people in an integrative process, which can be applied to product, service and business design. A theoretical structure comprising of Innovation perspectives (1), Worldviews supported by rationalist-historicist and empirical-idealistic dimensions (2) and Models of "design" reasoning (3) precedes the development and classification of existing methods as well as the introduction of new ones.

  18. 75 FR 7464 - Energy Efficient Building Systems Regional Innovation Cluster Initiative-Joint Federal Funding...

    Science.gov (United States)

    2010-02-19

    ... a regional innovation cluster focused on innovation in energy efficient building technologies and... technology challenges through approaches that span basic research to engineering development to... DEPARTMENT OF ENERGY Energy Efficient Building Systems Regional Innovation Cluster Initiative...

  19. Design and Innovation: Organizational Culture as Making

    DEFF Research Database (Denmark)

    Christensen, Poul Rind; Junginger, Sabine

    2013-01-01

    Designing, as an activity, is squeezed in a paradoxical agency between reproduction and innovation of meanings in society as well as in the organization. In this conceptual paper the apparent paradox is addressed in perspective of the organizational culture theory and examine the role of design...... in reproducing and innovating dominant organizational cultures....

  20. Computational Design for Sport Building

    NARCIS (Netherlands)

    Turrin, M.; Yang, D.; D'Aquilio, A.; Šileryte, R.; Sun, Y

    2016-01-01

    The design of sport buildings has great impact on top-sport as well as on recreational sport-activities. It implies challenging tasks in meeting the performance-requirements. This includes the control of factors like daylight/lighting, air flow, thermal conditions, just to name a few. Such factors

  1. Sustainable building design in practice

    DEFF Research Database (Denmark)

    Brunsgaard, Camilla; Bejder, Anne Kirkegaard

    2017-01-01

    Sustainability certification schemes experience growing popularity. Denmark got its own sustainability certification scheme based on the German DGNB certification scheme. Previous work based on four case studies – DGNB certified healthcare centres, suggests further research on how to improve...... and support the iterative design process in the initial design phases. Therefore, the objective of this paper is to investigate the design process on a more common level experienced by Danish DGNB consultants when designing sustainable buildings using the Danish DGNB certification scheme and thereby possibly...

  2. Competing explanations for adopting energy innovations for new office buildings

    International Nuclear Information System (INIS)

    Vermeulen, Walter J.V.; Hovens, Jeroen

    2006-01-01

    An integrative model to explain potential adopters' decisions to adopt energy innovations was adapted and applied in the field of new office building construction. We tested the relative effects of competing theoretical explanations (derived from economics, innovation science and policy science) on the decision to adopt. The research covered 35 projects representing 9% of the total volume of new office construction in the Netherlands between 2000 and mid-2002. Two levels of explanations for adopting innovations were derived: (a) the potential adopter's weighed assessments of the innovations and his or her nature of decision making and (b) explanation of those first-level variables. Using multiple regression techniques, we determined the relative influence on innovation-adoption of variables covering economy and technology, government intervention, company characteristics, and influences from market and society. The decision to adopt 'mature' innovations, in contrast to 'young' innovations, is based more on routine procedures than project-specific considerations. Policies need to take this difference into consideration. We also show evidence that in promoting adoption of E-innovations for new office buildings the Dutch system of applying Energy Performance Standards and subsidies proofs to be effective

  3. Conceptual Underpinnings for Innovation Policy Design

    DEFF Research Database (Denmark)

    Borrás, Susana; Edquist, Charles

    of innovation policy. This serves two important purposes. Firstly, it allows the identification of problems in an innovation system that require public policy intervention through the choice of appropriate policy instruments. Secondly, it allows a theoretically based identification of input indicators......In cases where innovation indicators and data fail to serve properly as a (necessary) basis for the design of innovation policies, it often has its roots in conceptual unclarities in the underlying concepts. The aim of this paper is to provide a theoretical and conceptual basis for the design...

  4. The Design of Holistic Innovation Policy

    DEFF Research Database (Denmark)

    Borrás, Susana; Edquist, Charles

    looks into a series of issues related to the design of holistic innovation policy. With this purpose in mind, this chapter summarizes previous chapters’ identification of the problems, bottlenecks and deficiencies that can afflict innovation systems. Taken together, they provide the theoretical...... foundations for the design of holistic innovation policy, which includes not only framing the problems in the innovation system, but also considerations about policy instruments for the tasks at hand, as well as the problems generated by policy itself (unintended consequences of inefficient of incomplete...

  5. Design Innovation Catalysts: Education and Impact

    Directory of Open Access Journals (Sweden)

    Cara Wrigley

    Full Text Available Organizations globally look to design to help them innovate, differentiate, and compete in a changing economic climate. Consequently, design is increasingly being regarded as a dynamic and central tactical business resource. Considering this, the question is raised: how can the specific knowledge and skills of designers be better articulated, understood, implemented, and valued as core components of strategic innovation in businesses? In seeking to answer this question, this paper proposes a new frontier for the design profession, coined the “Design Innovation Catalyst” (DIC. This paper reflects on both extant literature and the teaching of seven DICs embedded in industry, conducting innovation projects run over a twelve to twenty-four month period. This paper reports on a unique set of six capabilities analyzed as being not only essential for the implementation of design-led innovation, but of great assistance in overcoming its associated challenges. This paper outlines the role of these new design professionals, and discusses the value these novel capabilities provide organizations through employing DICs. Furthermore, questions surrounding how designers will develop these new capabilities, and how the design-led innovation framework in application can contribute to the future of design will also be presented.

  6. Innovative Nuclear Power Plant Building Arrangement in Consideration of Decommissioning

    OpenAIRE

    Won-Jun Choi; Myung-Sub Roh; Chang-Lak Kim

    2017-01-01

    A new concept termed the Innovative Nuclear Power Plant Building Arrangement (INBA) strategy is a new nuclear power plant building arrangement method which encompasses upfront consideration of more efficient decommissioning. Although existing decommissioning strategies such as immediate dismantling and differed dismantling has the advantage of either early site restoration or radioactive decommissioning waste reduction, the INBA strategy has the advantages of both strategies. In this research...

  7. Biomimetic design method for innovation and sustainability

    CERN Document Server

    Helfman Cohen, Yael

    2017-01-01

    Presenting a novel biomimetic design method for transferring design solutions from nature to technology, this book focuses on structure-function patterns in nature and advanced modeling tools derived from TRIZ, the theory of inventive problem-solving. The book includes an extensive literature review on biomimicry as an engine of both innovation and sustainability, and discusses in detail the biomimetic design process, current biomimetic design methods and tools. The structural biomimetic design method for innovation and sustainability put forward in this text encompasses (1) the research method and rationale used to develop and validate this new design method; (2) the suggested design algorithm and tools including the Findstructure database, structure-function patterns and ideality patterns; and (3) analyses of four case studies describing how to use the proposed method. This book offers an essential resource for designers who wish to use nature as a source of inspiration and knowledge, innovators and sustain...

  8. Sustainable school infrastructure through effective innovative building technology selection

    CSIR Research Space (South Africa)

    Mphahlele, C

    2014-10-01

    Full Text Available The aim of the paper is to provide an overview of a model proposed for the selection Innovative Building Technologies (IBTs) and procurement of services supporting the erection of the IBTs that will ensure the construction of a sustainable school...

  9. Innovations in building regulation and control for advancing sustainability in buildings (I)

    NARCIS (Netherlands)

    Meacham, B.; Visscher, H.J.; Meijer, F.M.; Chan, C.; Chan, E.; Laubscher, J.; Neng Kwei Sung, J.; Dodds, B.; Serra, J.; Tenorio, J.A.; Echeverria, J.B.; Sanches-Ostiz, A.

    2014-01-01

    This session brings together policy-makers, government officials, researchers and others to present perspectives on how innovation in building regulation and control, such as performancebased approaches, are currently being used to advance sustainability concepts in buildings, and where and how we

  10. Commercializing Government-sponsored Innovations: Twelve Successful Buildings Case Studies

    Science.gov (United States)

    Brown, M. A.; Berry, L. G.; Goel, R. K.

    1989-01-01

    This report examines the commercialization and use of R and D results funded by DOE's Office of Buildings and Community Systems (OBCS), an office that is dedicated to improving the energy efficiency of the nation's buildings. Three goals guided the research described in this report: to improve understanding of the factors that hinder or facilitate the transfer of OBCS R and D results, to determine which technology transfer strategies are most effective and under what circumstances each is appropriate, and to document the market penetration and energy savings achieved by successfully-commercialized innovations that have received OBCS support. Twelve successfully-commercialized innovations are discussed here. The methodology employed involved a review of the literature, interviews with innovation program managers and industry personnel, and data collection from secondary sources. Six generic technology transfer strategies are also described. Of these, contracting R and D to industrial partners is found to be the most commonly used strategy in our case studies. The market penetration achieved to date by the innovations studied ranges from less than 1% to 100%. For the three innovations with the highest predicted levels of energy savings (i.e., the flame retention head oil burner, low-E windows, and solid-state ballasts), combined cumulative savings by the year 2000 are likely to approach 2 quads. To date the energy savings for these three innovations have been about 0.2 quads. Our case studies illustrate the important role federal agencies can play in commercializing new technologies.

  11. Southern Regional Center for Lightweight Innovative Design

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Paul T. [Mississippi State Univ., Mississippi State, MS (United States)

    2012-12-01

    The Southern Regional Center for Lightweight Innovative Design (SRCLID) has developed an experimentally validated cradle-to-grave modeling and simulation effort to optimize automotive components in order to decrease weight and cost, yet increase performance and safety in crash scenarios. In summary, the three major objectives of this project are accomplished: To develop experimentally validated cradle-to-grave modeling and simulation tools to optimize automotive and truck components for lightweighting materials (aluminum, steel, and Mg alloys and polymer-based composites) with consideration of uncertainty to decrease weight and cost, yet increase the performance and safety in impact scenarios; To develop multiscale computational models that quantify microstructure-property relations by evaluating various length scales, from the atomic through component levels, for each step of the manufacturing process for vehicles; and To develop an integrated K-12 educational program to educate students on lightweighting designs and impact scenarios. In this final report, we divided the content into two parts: the first part contains the development of building blocks for the project, including materials and process models, process-structure-property (PSP) relationship, and experimental validation capabilities; the second part presents the demonstration task for Mg front-end work associated with USAMP projects.

  12. Theory Building- Towards an understanding of business model innovation processes

    DEFF Research Database (Denmark)

    Taran, Yariv; Boer, Harry; Lindgren, Peter

    2009-01-01

    Companies today, in some industries more than others, invest more capital and resources just to stay competitive, develop more diverse solutions, and increasingly start to think more radically, when considering to innovate their business model. However, the development and innovation of business...... models is a complex venture and has not been widely researched yet. The objective of this paper is therefore 1) to build a [descriptive] theoretical understanding, based on Christensen's (2005) three-step procedure, to business models and their innovation and, as a result of that, 2) to strengthen...... researchers' and practitioners' perspectives as to how the process of business model innovation can be realized. By using various researchers' perspectives and assumptions, we identify relevant inconsistencies, which consequently lead us to propose possible supplementary solutions. We conclude our paper...

  13. Building America Top Innovations 2014 Profile: California Energy Standards Recognize the Importance of Filter Selection

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-11-01

    This 2014 Top Innovation profile describes Building America research on HVAC air filter sizing that prompted a change in the California “Title 24” Energy Code requiring filter manufacturers, HVAC designers, and HERS raters to make changes that will encourage the use of higher MERV filters without degrading HVAC performance.

  14. Working Examples (WEx): A Vehicle for Building Radical Innovations to Change Education

    Science.gov (United States)

    Zywica, Jolene; Roberts, Anna; Davidson, Drew

    2013-01-01

    Working Examples (WEx) is described by the authors as a vehicle for ideating and building radical innovations to change education. It is a community of researchers, designers, and educators working at the intersection of education and technology. "Examples" (ideas, work, and projects) allow people to explore new ideas, learn from each…

  15. Designing Smart Knowledge Building Communities

    Directory of Open Access Journals (Sweden)

    Ambar Murillo Montes de Oca

    2014-11-01

    Full Text Available Knowledge building communities (KBCs are environments where learning is continually occurring as a social process, and the collective knowledge base is gradually being expanded upon. Knowledge accessible to all members is produced in collaborative discourse, along with the development and the use of conceptual artifacts. This theoretical contribution discusses the possibilities to foster and design KBCs in a “smart” manner so that they can be connected to formal learning. Firstly, the paper identifies the characteristics of “smartness” for the context of KBCs: participants (individuals and groups, collaboration and convergence, as well as technology that may provide enabling and monitoring tools. Secondly, tools are suggested to foster and monitor the development and the use of collaborative discourse and conceptual artifacts. Thirdly, recommendations for the design of smart KBCs are provided. Finally, a research agenda is proposed based on the previous discussions.

  16. Innovative teaching methods for capacity building in knowledge translation.

    Science.gov (United States)

    Wahabi, Hayfaa A; Al-Ansary, Lubna A

    2011-10-14

    In some current healthcare settings, there is a noticeable absence of national institutions committed to the synthesis and use of evidence in healthcare decision- and policy-making. This absence creates a need to broaden the responsibilities of healthcare providers to include knowledge brokering and advocacy in order to optimize knowledge translation to other stakeholders, especially policy-makers. However, this process requires practitioners and researchers to acquire certain types of knowledge and skills. This article introduces two innovative methods for capacity building in knowledge translation (KT). During a workshop aimed at preparing 21 trainers in evidence-based medicine, two innovative methods were used: (1) debate and (2) a knowledge translation project (KTP). The main objective of the debates approach was to strengthen participants' critical thinking abilities by requiring them to search for and appraise evidence and defend their arguments. The KTP was used to introduce participants to the essential steps of knowledge translation and to suggest an extended role for healthcare practitioners, i.e., using evidence to manage not only individual patients but also to a community of patients. Participants' performances were assessed according to a pre-designed scheme. At the end of the workshop, participants' opinions and experiences with the innovative teaching methods were evaluated based on their answers to a questionnaire and the results of small-group discussions. The participants performed well in both the debate and KTP methods. During post-workshop group discussions, they indicated that the debate approach had added a new dimension to their evidence-based medicine skills by adding purpose and motivation. However, they felt that their performances would have been better if they had been offered practical demonstrations of how to conduct the debate. The participants indicated that the KTP enhanced their understanding of the relationships between evidence

  17. Innovative teaching methods for capacity building in knowledge translation

    Directory of Open Access Journals (Sweden)

    Al-Ansary Lubna A

    2011-10-01

    Full Text Available Abstract Background In some current healthcare settings, there is a noticeable absence of national institutions committed to the synthesis and use of evidence in healthcare decision- and policy-making. This absence creates a need to broaden the responsibilities of healthcare providers to include knowledge brokering and advocacy in order to optimize knowledge translation to other stakeholders, especially policy-makers. However, this process requires practitioners and researchers to acquire certain types of knowledge and skills. This article introduces two innovative methods for capacity building in knowledge translation (KT. Methods During a workshop aimed at preparing 21 trainers in evidence-based medicine, two innovative methods were used: (1 debate and (2 a knowledge translation project (KTP. The main objective of the debates approach was to strengthen participants' critical thinking abilities by requiring them to search for and appraise evidence and defend their arguments. The KTP was used to introduce participants to the essential steps of knowledge translation and to suggest an extended role for healthcare practitioners, i.e., using evidence to manage not only individual patients but also to a community of patients. Participants' performances were assessed according to a pre-designed scheme. At the end of the workshop, participants' opinions and experiences with the innovative teaching methods were evaluated based on their answers to a questionnaire and the results of small-group discussions. Results The participants performed well in both the debate and KTP methods. During post-workshop group discussions, they indicated that the debate approach had added a new dimension to their evidence-based medicine skills by adding purpose and motivation. However, they felt that their performances would have been better if they had been offered practical demonstrations of how to conduct the debate. The participants indicated that the KTP enhanced their

  18. Students as Learning Designers in Innovation Education

    DEFF Research Database (Denmark)

    Magnussen, Rikke; Sørensen, Birgitte Holm

    2014-01-01

    This paper, which concerns criteria for developing technology-enhanced innovation education, discusses how teacher and student relationships change in these learning spaces. The case study in this paper involves a school in Denmark where teachers and students, aged 6-14, were involved in developing...... and testing new forms of technology-enhanced innovation education as part of the establishment of an EduTechLab at the school. Established in new facilities at the school, the lab contained learning technologies such as Nao robots, sensor kits, and 3D visualisation and printing facilities. The goal of the Edu......TechLab project was to establish a creative learning environment for students and teachers that would support innovative practice with new forms of learning technology. Part of this goal was to involve students in innovative design processes in order for them to experiment with their own design solutions to case...

  19. Sociotechnical Dimensions of Design and Innovation

    DEFF Research Database (Denmark)

    of technology). The paper thus challenges the orthodox linear and sequential model of innovation and diffusion, which fail to capture and problematise the complexity of the dynamics involved in sociotechnical change. The paper takes a relatively broad stance as to what constitutes sociotechnical dimensions...... of the sociotechnical dimensions of innovation processes. The paper’s analysis is itself guided by a reflexive stance as to the ‘social shaping of technology’, primarily drawing on an actor-network (ANT) understanding and perspectives based on the enculturation of innovations (e.g. inno-fusion or domestication......The paper addresses interdisciplinary approaches to the study of design and innovation processes, by gathering and critically examining research contributions to date from a number of different scholarly traditions and practices including constructivist studies, participative design activities...

  20. Co-simulation of innovative integrated HVAC systems in buildings

    Energy Technology Data Exchange (ETDEWEB)

    Trcka, Marija; Hensena, Jan L.M.; Wetter, Michael

    2010-06-21

    Integrated performance simulation of buildings HVAC systems can help in reducing energy consumption and increasing occupant comfort. However, no single building performance simulation (BPS) tool offers sufficient capabilities and flexibilities to analyze integrated building systems and to enable rapid prototyping of innovative building and system technologies. One way to alleviate this problem is to use co-simulation, as an integrated approach to simulation. This article elaborates on issues important for co-simulation realization and discusses multiple possibilities to justify the particular approach implemented in the here described co-simulation prototype. The prototype is validated with the results obtained from the traditional simulation approach. It is further used in a proof-of-concept case study to demonstrate the applicability of the method and to highlight its benefits. Stability and accuracy of different coupling strategies are analyzed to give a guideline for the required coupling time step.

  1. 75 FR 17700 - Energy Efficient Building Systems Regional Innovation Cluster Initiative-Joint Federal Funding...

    Science.gov (United States)

    2010-04-07

    ... economically dynamic regional innovation cluster focused on energy efficient buildings technologies and systems...-risk, high-reward research that overcomes technology challenges through approaches that span basic... DEPARTMENT OF ENERGY Energy Efficient Building Systems Regional Innovation Cluster Initiative...

  2. Zomeworks corporation: design driven innovation

    NARCIS (Netherlands)

    Marinakis, Yorgos; Harms, Rainer; Walsh, Steven Thomas

    2014-01-01

    Zomeworks, a small-sized designer-manufacturer of passive solar energy products, is considering launching a new freeze-tolerant passive thermosiphon solar water heater. The firm’s target market analysis is based only on consumer economics. How can the firm design the product and select a target

  3. 75 FR 16739 - EDA Participation in the Energy Efficient Building Systems Regional Innovation Cluster Initiative

    Science.gov (United States)

    2010-04-02

    ...: Promote regional development; Accelerate innovation, technology transfer, and entrepreneurship to create... priorities, which are: Collaborative Regional Innovation. Initiatives that support the development and growth... Participation in the Energy Efficient Building Systems Regional Innovation Cluster Initiative AGENCY: Economic...

  4. Shape Grammars for Innovative Hybrid Typological Design

    DEFF Research Database (Denmark)

    Al-kazzaz, Dhuha; Bridges, Alan; Chase, Scott Curland

    2010-01-01

    This paper describes a new methodology of deriving innovative hybrid designs using shape grammars of heterogeneous designs. The method is detailed within three phases of shape grammars: analysis, synthesis and evaluation. In the analysis phase, the research suggests that original rules of each...... design component are grouped in subclass rule sets to facilitate rule choices. Additionally, adding new hybrid rules to original rules expands the options available to the grammar user. In the synthesis phase, the research adopts state labels and markers to drive the design generation. The former...... is implemented with a user guide grammar to ensure hybridity in the generated design, while the latter aims to ensure feasible designs. Lastly evaluation criteria are added to measure the degree of innovation of the hybrid designs. This paper describes the derivation of hybrid minaret designs from a corpus...

  5. Mastering Technologies in Design-Driven Innovation

    DEFF Research Database (Denmark)

    Dell'era, Claudio; Marchesi, Alessio; Verganti, Roberto

    2010-01-01

    Only a few companies have mastered the design-driven approach to innovation. This paper examines what it means to make design a central part of the business process, able to add value to products and create new markets. More specifically, it focuses on the interplay between the functional and sem...

  6. Commercializing government-sponsored innovations: Twelve successful buildings case studies

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.A.; Berry, L.G.; Goel, R.K.

    1989-01-01

    This report examines the commercialization and use of R and D results funded by DOE's Office of Buildings and Community Systems (OBCS), an office that is dedicated to improving the energy efficiency of the nation's buildings. Three goals guided the research described in this report: to improve understanding of the factors that hinder or facilitate the transfer of OBCS R and D results, to determine which technology transfer strategies are most effective and under what circumstances each is appropriate, and to document the market penetration and energy savings achieved by successfully-commercialized innovations that have received OBCS support. Twelve successfully-commercialized innovations are discussed here. The methodology employed involved a review of the literature, interviews with innovation program managers and industry personnel, and data collection from secondary sources. Six generic technology transfer strategies are also described. Of these, contracting R and D to industrial partners is found to be the most commonly used strategy in our case studies. The market penetration achieved to date by the innovations studied ranges from less than 1% to 100%. For the three innovations with the highest predicted levels of energy savings (i.e., the flame retention head oil burner, low-E windows, and solid-state ballasts), combined cumulative savings by the year 2000 are likely to approach 2 quads. To date the energy savings for these three innovations have been about 0.2 quads. Our case studies illustrate the important role federal agencies can play in commercializing new technologies. 27 refs., 21 figs., 4 tabs.

  7. Standardization of green building technologies for environment design

    Directory of Open Access Journals (Sweden)

    Benuzh Andrey

    2016-01-01

    Full Text Available The article describes the structure and field of standardization ISO / TC 205 “Building environment design”, provides examples of green building technologies. The main purpose of the article is to show the interaction between international ISO / TC 205 “Building environment design” and created in Russia in 2016 the Technical Committee of Standardization № 366 “Green technology of the build environment and green innovative products”. Both of these technical committees promote green building technologies for environment design, thereby deal with the negative impact on the environment and the reasons of global warming. Instead of buildings that attempt to suppress and overcome nature, why not design buildings that integrate with the environment, on every possible level? The international standardization work which ISO/TC 205 “Building environment design” performs seeks, in addition to lowering trade barriers for engineering design, to promote and facilitate the design of high performance buildings: higher performing as economic assets for their owners, higher performing as buildings that provide amenable indoor environment for their occupants, and higher performing with respect to resource utilization and environmental impact.

  8. Research on an innovative design model

    Science.gov (United States)

    Fu, Y.; Fang, H.

    2018-03-01

    The design methods of furniture are different from east to west; it has been the hotspot of the scholars. However, in terms of the theory of modern design innovation, neither the early creation theory, the modern design theory, nor the widely applied TRIZ theory can fully fit the modern furniture design innovation, so it is urgent to study the modern furniture design theory. This paper is based on the idea of TRIZ theory, using lots of literatures as data, and uses the method of statistical stratification to analyze and sort out the research of modern sitting equipment, and finally put forward the modern furniture design model, which provides new ideas and perspectives for the modern design of Chinese furniture.

  9. Facilitating design and innovation workshops using the Value Design Canvas

    NARCIS (Netherlands)

    Atasoy, P.; Bekker, M.M.; Lu, Y.; Brombacher, A.C.; Eggen, J.H.; Melkas, H.; Buur, J.

    2013-01-01

    Design and innovation workshops are common practices to match diverse stakeholders to initiate collaboration for innovation. Due to the complex and multi-faceted processes in such a collaboration workshop, not only the toolkits but also the facilitation of the process needs to be taken into account.

  10. Design Buildings Optimally: A Lifecycle Assessment Approach

    KAUST Repository

    Hosny, Ossama

    2013-01-01

    This paper structures a generic framework to support optimum design for multi-buildings in desert environment. The framework is targeting an environmental friendly design with minimum lifecycle cost, using Genetic Algorithms (Gas). GAs function through a set of success measures which evaluates the design, formulates a proper objective, and reflects possible tangible/intangible constraints. The framework optimizes the design and categorizes it under a certain environmental category at minimum Life Cycle Cost (LCC). It consists of three main modules: (1) a custom Building InformationModel (BIM) for desert buildings with a compatibility checker as a central interactive database; (2) a system evaluator module to evaluate the proposed success measures for the design; and (3) a GAs optimization module to ensure optimum design. The framework functions through three levels: the building components, integrated building, and multi-building levels. At the component level the design team should be able to select components in a designed sequence to ensure compatibility among various components, while at the building level; the team can relatively locate and orient each individual building. Finally, at the multi-building (compound) level the whole design can be evaluated using success measures of natural light, site capacity, shading impact on natural lighting, thermal change, visual access and energy saving. The framework through genetic algorithms optimizes the design by determining proper types of building components and relative buildings locations and orientations which ensure categorizing the design under a specific category or meet certain preferences at minimum lifecycle cost.

  11. Innovative Sustainable Water Management Practices in Solar Residential Design

    Directory of Open Access Journals (Sweden)

    C. Jason Mabry

    2012-11-01

    Full Text Available This paper communicates the results of an architectural research project which sought innovative design strategies for achieving energy and resource efficiencies in water management systems traditionally used in single-family housing. It describes the engineering of an efficient, multifaceted, and fully integrated water management system for a domesticenvironment of 800 sq. ft., entirely powered by solar energy. The four innovations whose details are conveyed include the use of alternate materials for piping distribution and collection, the use of water in solar energy generation, the design of a building skin which capitalizes on water’s capacity to store heat as well as the design of a ecological groundscape which re-usesand filters waste water and rain water.Keywords: energy, plumbing, home design

  12. On managing innovation by design : Towards SMART methods

    NARCIS (Netherlands)

    Vermaas, P.E.

    2012-01-01

    In this paper innovation by design is characterised schematically and methodological with the aim of analysing how projects of innovation by design can be managed. First, I approach innovation by design from an engineering perspective, and show that the incorporation of innovation into design

  13. Design and Innovation - The DTU programme

    DEFF Research Database (Denmark)

    Alting, Leo; Andreasen, Mogens Myrup; Boelskifte, Per

    2006-01-01

    of the accompanying research. It is illustrated how the development of particularly the socio-technical dimensions of design and innovation are based on a close observation of the challenges facing industry. The new competences are expected to support modernisation of industrial methods and organisational schemes......The new design & innovation programme at DTU represents a fundamental rethinking of the standard concepts dominating most engineering educations. The teaching, its background, context and basic educational ideas are presented and discussed in this paper together with the basic ideas...

  14. Design theory methods and organization for innovation

    CERN Document Server

    Le Masson, Pascal; Hatchuel, Armand

    2017-01-01

    This textbook presents the core of recent advances in design theory and its implications for design methods and design organization. Providing a unified perspective on different design methods and approaches, from the most classic (systematic design) to the most advanced (C-K theory), it offers a unique and integrated presentation of traditional and contemporary theories in the field. Examining the principles of each theory, this guide utilizes numerous real life industrial applications, with clear links to engineering design, industrial design, management, economics, psychology and creativity. Containing a section of exams with detailed answers, it is useful for courses in design theory, engineering design and advanced innovation management. "Students and professors, practitioners and researchers in diverse disciplines, interested in design, will find in this book a rich and vital source for studying fundamental design methods and tools as well as the most advanced design theories that work in practice". Pro...

  15. Theoretical and technological building blocks for an innovation accelerator

    Science.gov (United States)

    van Harmelen, F.; Kampis, G.; Börner, K.; van den Besselaar, P.; Schultes, E.; Goble, C.; Groth, P.; Mons, B.; Anderson, S.; Decker, S.; Hayes, C.; Buecheler, T.; Helbing, D.

    2012-11-01

    Modern science is a main driver of technological innovation. The efficiency of the scientific system is of key importance to ensure the competitiveness of a nation or region. However, the scientific system that we use today was devised centuries ago and is inadequate for our current ICT-based society: the peer review system encourages conservatism, journal publications are monolithic and slow, data is often not available to other scientists, and the independent validation of results is limited. The resulting scientific process is hence slow and sloppy. Building on the Innovation Accelerator paper by Helbing and Balietti [1], this paper takes the initial global vision and reviews the theoretical and technological building blocks that can be used for implementing an innovation (in first place: science) accelerator platform driven by re-imagining the science system. The envisioned platform would rest on four pillars: (i) Redesign the incentive scheme to reduce behavior such as conservatism, herding and hyping; (ii) Advance scientific publications by breaking up the monolithic paper unit and introducing other building blocks such as data, tools, experiment workflows, resources; (iii) Use machine readable semantics for publications, debate structures, provenance etc. in order to include the computer as a partner in the scientific process, and (iv) Build an online platform for collaboration, including a network of trust and reputation among the different types of stakeholders in the scientific system: scientists, educators, funding agencies, policy makers, students and industrial innovators among others. Any such improvements to the scientific system must support the entire scientific process (unlike current tools that chop up the scientific process into disconnected pieces), must facilitate and encourage collaboration and interdisciplinarity (again unlike current tools), must facilitate the inclusion of intelligent computing in the scientific process, must facilitate

  16. Spark innovation through empathic design.

    Science.gov (United States)

    Leonard, D; Rayport, J F

    1997-01-01

    Companies are used to bringing in customers to participate in focus groups, usability laboratories, and market research surveys in order to help in the development of new products and services. And for improving products that customers know well, those tools are highly sophisticated. For example, knowledgeable customers are adept at identifying the specific scent of leather they expect in a luxury vehicle or at helping to tune the sound of a motorcycle engine to just the timbre that evokes feelings of power. But to go beyond improvements to the familiar, companies need to identify and meet needs that customers may not yet recognize. To accomplish that task, a set of techniques called empathic design can help. Rather than bring the customers to the company, empathic design calls for company representatives to watch customers using products and services in the context of their own environments. By doing so, managers can often identify unexpected uses for their products, just as the product manager of a cooking oil did when he observed a neighbor spraying the oil on the blades of a lawn mower to reduce grass buildup. They can also uncover problems that customers don't mention in surveys, as the president of Nissan Design did when he watched a couple struggling to remove the backseat of a competitor's minivan in order to transport a couch. The five-step process Dorothy Leonard and Jeffrey Rayport describe in detail is a relatively low-cost, low-risk way to identify customer needs, and it has the potential to redirect a company's existing technological capabilities toward entirely new businesses.

  17. Energy saving innovations in residential buildings. Energiesparende Innovationen im Eigenheim

    Energy Technology Data Exchange (ETDEWEB)

    Gruber, E; Meyer, T

    1983-01-01

    Socio-economic studies have been carried out in the course of the ''Landstuhl demonstration project'' with the aim of evaluating supporting and hampering factors for the realization of energy saving measures, especially for the use of innovation techniques and the use of passive solar energy in residential buildings. The results of two opinion polls have been presented by means of standardized personal interviews with building-owners (in the whole Federal Republic and in the demonstration area) and with building experts (264 persons questioned). The evaluations of the results of the opinion poll show that energy conservation plays an important but not a dominant part in the planning of residential buildings. In the ''Landstuhl area'' energy saving investments took an above-average high position (large impact of the demonstration project). The building-owners and experts most frequently wanted and recommended increased conventional measures. It could be shown that the imagination of the building-owners was asked too much when taking measures for the use of passive solar energy.

  18. Irregular Shaped Building Design Optimization with Building Information Modelling

    Directory of Open Access Journals (Sweden)

    Lee Xia Sheng

    2016-01-01

    Full Text Available This research is to recognise the function of Building Information Modelling (BIM in design optimization for irregular shaped buildings. The study focuses on a conceptual irregular shaped “twisted” building design similar to some existing sculpture-like architectures. Form and function are the two most important aspects of new buildings, which are becoming more sophisticated as parts of equally sophisticated “systems” that we are living in. Nowadays, it is common to have irregular shaped or sculpture-like buildings which are very different when compared to regular buildings. Construction industry stakeholders are facing stiff challenges in many aspects such as buildability, cost effectiveness, delivery time and facility management when dealing with irregular shaped building projects. Building Information Modelling (BIM is being utilized to enable architects, engineers and constructors to gain improved visualization for irregular shaped buildings; this has a purpose of identifying critical issues before initiating physical construction work. In this study, three variations of design options differing in rotating angle: 30 degrees, 60 degrees and 90 degrees are created to conduct quantifiable comparisons. Discussions are focused on three major aspects including structural planning, usable building space, and structural constructability. This research concludes that Building Information Modelling is instrumental in facilitating design optimization for irregular shaped building. In the process of comparing different design variations, instead of just giving “yes or no” type of response, stakeholders can now easily visualize, evaluate and decide to achieve the right balance based on their own criteria. Therefore, construction project stakeholders are empowered with superior evaluation and decision making capability.

  19. Challenges in biomimetic design and innovation

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Barfoed, Michael; Shu, Li

    Biomimetic design copies desired principles found in nature and implement them into artificial applications. Applications could be products we use in our daily life but it can also be used to inspire material innovation. However there are significant challenges in performing biomimetic design. One....... This is a key issue in design and innovation work where problem identification and systematic search for suitable solution principle are major activities. One way to deal with this challenge is to use a biology search method. The use of such a method is illustrated with a case story describing the design...... including the terminology and knowledge organisation. It is often easy to recognise the splendour of a biological solution, but it can be much more difficult to understand the underlying mechanisms. Another challenge in biomimetic design is the search and identification of relevant solutions in nature...

  20. KAJIAN SUSTAINABLE DESIGN PADA SAVILL BUILDING

    Directory of Open Access Journals (Sweden)

    Oktavi Elok Hapsari

    2015-08-01

    Full Text Available Since 1980 the development of Indonesian architecture design start to leads into sustainable architectural design which as it was expected to became a solution regarding the environmental problems. The implementation of sustainable design in buildings can be applied from the buildings typologi, renewable resources on materials untill the reduction of the negative impact againts the buildings surrounding environment. As the main object for this study was 2006 The Woods Awardee, Savill Building. A literature study was conducted related to sustainable concept design and the implementation in Savill Buildings. Savill Building is a transparance walls buildings with steel and wooden as main materials on it complex curve gridshell structures. Located in a countoured site Savill Building show it assertive appearance. Due to the good landscape processing and design the Savill Building stood out and yet still shown continuity and harmony with the surrounding environment. The buildings not only has a eco-friendly public facility function, but also has the capability on attracting visitors. In the end this study is expected able expand the knowledges on sustainable design and become a design references in Indonesia architectural design.

  1. Occupant behaviour and robustness of building design

    DEFF Research Database (Denmark)

    Buso, Tiziana; Fabi, Valentina; Andersen, Rune Korsholm

    2015-01-01

    in a dynamic building energy simulation tool (IDA ICE). The analysis was carried out by simulating 15 building envelope designs in different thermal zones of an Office Reference Building in 3 climates: Stockholm, Frankfurt and Athens.In general, robustness towards changes in occupants' behaviour increased......Occupant behaviour can cause major discrepancies between the designed and the real total energy use in buildings. A possible solution to reduce the differences between predictions and actual performances is designing robust buildings, i.e. buildings whose performances show little variations...... with alternating occupant behaviour patterns. The aim of this work was to investigate how alternating occupant behaviour patterns impact the performance of different envelope design solutions in terms of building robustness. Probabilistic models of occupants' window opening and use of shading were implemented...

  2. The Conceptual Design of Innovative Safe PWR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Han-Gon [Centural Research Institute, Daejeon (Korea, Republic of); Heo, Sun [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

    2016-10-15

    Most of countries operating NPPs have been performed post-Fukushima improvements as short-term countermeasure to enhance the safety of operating NPPs. Separately, vendors have made efforts on developing passive safety systems as long-term and ultimate countermeasures. AP1000 designed by Westinghouse Electric Company has passive safety systems including the passive emergency core cooling system (PECCS), the passive residual heat removal system (PRHRS), and the passive containment cooling system (PCCS). ESBWR designed by GE-Hitachi also has passive safety systems consisting of the isolation condenser system, the gravity driven cooling system and the PCCS. Other countries including China and Russia have made efforts on developing passive safety systems for enhancing the safety of their plants. In this paper, we summarize the design goals and main design feature of innovative safe PWR, iPOWER which is standing for Innovative Passive Optimized World-wide Economical Reactor, and show the developing status and results of research projects. To mitigate an accident without electric power and enhance the safety level of PWR, the conceptual designs of passive safety system and innovative safe PWR have been performed. It includes the PECCS for core cooling and the PCCS for containment cooling. Now we are performing the small scale and separate effect tests for the PECCS and the PCCS and preparing the integral effect test for the PECCS and real scale test for the PCCS.

  3. Innovative nuclear power plant building arragement in consideration of decommissioning

    International Nuclear Information System (INIS)

    Choi, Won Jun; Roh, Myung Sub; Kim, Chang Lak

    2017-01-01

    A new concept termed the Innovative Nuclear Power Plant Building Arrangement (INBA) strategy is a new nuclear power plant building arrangement method which encompasses upfront consideration of more efficient decommissioning. Although existing decommissioning strategies such as immediate dismantling and differed dismantling has the advantage of either early site restoration or radioactive decommissioning waste reduction, the INBA strategy has the advantages of both strategies. In this research paper, the concept and the implementation method of the INBA strategy will be described. Two primary benefits will be further described: (1) early site restoration; and (2) radioactive waste reduction. Several other potential benefits will also be identified. For the estimation of economic benefit, the INBA strategy, with two primary benefits, will be compared with the immediate dismantling strategy. The effect of a short life cycle nuclear power plant in combination with the INBA strategy will be reviewed. Finally, some of the major impediments to the realization of this strategy will be discussed

  4. Innovative nuclear power plant building arragement in consideration of decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Won Jun; Roh, Myung Sub; Kim, Chang Lak [Dept. of Nuclear Power Plant Engineering, KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2017-04-15

    A new concept termed the Innovative Nuclear Power Plant Building Arrangement (INBA) strategy is a new nuclear power plant building arrangement method which encompasses upfront consideration of more efficient decommissioning. Although existing decommissioning strategies such as immediate dismantling and differed dismantling has the advantage of either early site restoration or radioactive decommissioning waste reduction, the INBA strategy has the advantages of both strategies. In this research paper, the concept and the implementation method of the INBA strategy will be described. Two primary benefits will be further described: (1) early site restoration; and (2) radioactive waste reduction. Several other potential benefits will also be identified. For the estimation of economic benefit, the INBA strategy, with two primary benefits, will be compared with the immediate dismantling strategy. The effect of a short life cycle nuclear power plant in combination with the INBA strategy will be reviewed. Finally, some of the major impediments to the realization of this strategy will be discussed.

  5. Innovative Nuclear Power Plant Building Arrangement in Consideration of Decommissioning

    Directory of Open Access Journals (Sweden)

    Won-Jun Choi

    2017-04-01

    Full Text Available A new concept termed the Innovative Nuclear Power Plant Building Arrangement (INBA strategy is a new nuclear power plant building arrangement method which encompasses upfront consideration of more efficient decommissioning. Although existing decommissioning strategies such as immediate dismantling and differed dismantling has the advantage of either early site restoration or radioactive decommissioning waste reduction, the INBA strategy has the advantages of both strategies. In this research paper, the concept and the implementation method of the INBA strategy will be described. Two primary benefits will be further described: (1 early site restoration; and (2 radioactive waste reduction. Several other potential benefits will also be identified. For the estimation of economic benefit, the INBA strategy, with two primary benefits, will be compared with the immediate dismantling strategy. The effect of a short life cycle nuclear power plant in combination with the INBA strategy will be reviewed. Finally, some of the major impediments to the realization of this strategy will be discussed.

  6. Innovative multi rotor wind turbine designs

    Energy Technology Data Exchange (ETDEWEB)

    Kale, S.A.; Sapali, S.N. [College of Engineering. Mechanical Engineering Dept, Pune (India)

    2012-07-01

    Among the renewable energy sources, today wind energy is the most recognized and cost effective. Developers and researchers in this sector are optimistic and continuously working innovatively to improve the technology. The wind power obtained is proportional to the swept area of wind turbine. The swept area is increased by using a single rotor of large diameter or multi rotors in array. The rotor size is growing continuously with mature technology. Multi rotor technology has a long history and the multi rotor concept persists in a variety of modern innovative systems but the concept has fallen out of consideration in mainstream design from the perception that is complex and unnecessary as very large single rotor units are now technically feasible. This work addresses the evaluation of different multi rotor wind turbine systems. These innovative wind turbines are evaluated on the basis of feasibility, technological advantages, security of expected power performance, cost, reliability, impact of innovative system, comparison with existing wind turbine design. The findings of this work will provide guidelines for the practical and economical ways for further research on the multi rotor wind turbines. (Author)

  7. Optimized design of low energy buildings

    DEFF Research Database (Denmark)

    Rudbeck, Claus Christian; Esbensen, Peter Kjær; Svendsen, Sv Aa Højgaard

    1999-01-01

    concern which can be seen during the construction of new buildings. People want energy-friendly solutions, but they should be economical optimized. An exonomical optimized building design with respect to energy consumption is the design with the lowest total cost (investment plus operational cost over its...... to evaluate different separate solutions when they interact in the building.When trying to optimize several parameters there is a need for a method, which will show the correct price-performance of each part of a building under design. The problem with not having such a method will first be showed...

  8. Design of a distributed simulation environment for building control applications based on systems engineering methodology

    NARCIS (Netherlands)

    Yahiaoui, Azzedine

    2018-01-01

    The analysis of innovative designs that distributes control to buildings over a network is currently a challenging task as exciting building performance simulation tools do not offer sufficient capabilities and the flexibility to fully respond to the full complexity of Automated Buildings (ABs). For

  9. Designing an Earthquake-Resistant Building

    Science.gov (United States)

    English, Lyn D.; King, Donna T.

    2016-01-01

    How do cross-bracing, geometry, and base isolation help buildings withstand earthquakes? These important structural design features involve fundamental geometry that elementary school students can readily model and understand. The problem activity, Designing an Earthquake-Resistant Building, was undertaken by several classes of sixth- grade…

  10. Alternative Natural Energy Sources in Building Design.

    Science.gov (United States)

    Davis, Albert J.; Schubert, Robert P.

    This publication provides a discussion of various energy conserving building systems and design alternatives. The information presented here covers alternative space and water heating systems, and energy conserving building designs incorporating these systems and other energy conserving techniques. Besides water, wind, solar, and bio conversion…

  11. Innovation in the U.S. building sector: An assessment of patent citations in building energy control technology

    International Nuclear Information System (INIS)

    Altwies, Joy E.; Nemet, Gregory F.

    2013-01-01

    Buildings are crucial to addressing energy problems because they are large consumers of end-use energy, and potential exists to dramatically improve their efficiencies. However, the pace of innovation in buildings is generally characterized as inadequate, despite the implementation of an array of policy instruments aimed at promoting efficiency. The literature on innovation in the building industry provides several explanations including: fragmented decision-making, principal agent problems, inadequate information, and limited learning across heterogeneous projects. We investigate the innovation process for buildings in the U.S. with a case study of patenting in energy management control systems (EMCS) for commercial buildings and programmable thermostats (PT) for residential buildings. Using U.S. patent data, we find that: (1) patenting activity peaked around 1980, subsequently declined, and then increased considerably in the past decade; (2) commercial, rather than residential, buildings account for the recent increase; and (3) building control technologies have benefitted from inventions originating outside the industry, notably from electronics and computers, with a shift toward the latter in recent years. - Highlights: ► We investigate the innovation process for buildings in the U.S. using patents. ► We use commercial and residential building controls technology as a case study. ► Patenting peaked around 1980, declined, and then increased in the past decade. ► Commercial building control patents account for most of the recent increase. ► Inventions in electronics and computers have led to innovation in building controls.

  12. Understanding innovation system build up. The rise and fall of the Dutch PV Innovation System

    International Nuclear Information System (INIS)

    Negro, S.O.; Vasseur, V.; Hekkert, M.P.; Van Sark, W.G.J.H.M.

    2009-01-01

    Renewable energy technologies have a hard time to break through in the existing energy regime. In this paper we focus on analysing the mechanisms behind this problematic technology diffusion. We take the theoretical perspective of innovation system dynamics and apply this to photovoltaic solar energy technology (PV) in the Netherlands. The reason for this is that there is a long history of policy efforts in The Netherlands to stimulate PV but results in terms of diffusion of PV panels is disappointingly low, which clearly constitutes a case of slow diffusion. The history of the development of the PV innovation system is analysed in terms of seven key processes that are essential for the build up of innovation systems. We show that the processes related to knowledge development are very stable but that large fluctuations are present in the processes related to 'guidance of the search' and 'market formation'. Surprisingly, entrepreneurial activities are not too much affected by fluctuating market formation activities. We relate this to market formation in neighbouring countries and discuss the theoretical implications for the technological innovation system framework.

  13. Interactivity, Game Creation, Design, Learning, and Innovation

    DEFF Research Database (Denmark)

    This book constitutes the proceedings of two conferences: The 5th International Conference on ArtsIT, Interactivity and Game Creation (ArtsIT 2016) and the First International Conference on Design, Learning and Innovation (DLI 2016). ArtsIT is reflecting trends in the expanding field of digital art......, interactive art, and how game creation is considered an art form. The decision was made to augment the title of ArtsIT to be in future known as “The International Conference on Interactivity, Game Creation, Design, Learning, and Innovation”. The event was hosted in Esbjerg, Denmark in May 2016 and attracted...

  14. Developing biomedical devices design, innovation and protection

    CERN Document Server

    Andreoni, Giuseppe; Colombo, Barbara

    2013-01-01

    During the past two decades incredible progress has been achieved in the instruments and devices used in the biomedical field. This progress stems from continuous scientific research that has taken advantage of many findings and advances in technology made available by universities and industry. Innovation is the key word, and in this context legal protection and intellectual property rights (IPR) are of crucial importance. This book provides students and practitioners with the fundamentals for designing biomedical devices and explains basic design principles. Furthermore, as an aid to the dev

  15. Innovative design of viscoelastic dampers for seismic mitigation

    International Nuclear Information System (INIS)

    Tsai, C.S.

    1993-01-01

    In this paper, an advanced and more reliable design of viscoelastic dampers for seismic mitigation of high-rise buildings is presented. The innovative design of energy-absorbing devices has some advantages, compared to the classical design, as follows: One, the device is directly subjected to shear strains and forces due to story drifts; two, the device can support its own weight during normal operations, and maintain stable for large deformations during earthquakes; three, the device can reduce the responses of a structure to horizontal as well as vertical seismic loadings; and four, the device can also decrease the responses of the floor system of a building. In this study, a ten-story building is given as an example to express the merits obtained from the new system. Comparisons of the building equipped with classical and proposed devices of viscoelastic dampers are carefully studied. Numerical results show that the energy-absorbing capacity of the new device is superior to the classical one, especially for vertical vibrations. (orig.)

  16. Designing Geoscience Educational Innovations That Propagate

    Science.gov (United States)

    Lea, P.

    2014-12-01

    NSF and other funders have supported the development of undergraduate STEM educational innovations over the past decades, only to see many yield limited uptake and impact beyond the grantee institutions. Numerous factors contribute to this complex problem, but one cause is likely insufficient incorporation of the understanding of how innovations propagate into project design. Following J.W. Dearing and colleagues, "dissemination" can be characterized by "push" approaches, which mainly emphasize one-to-many information sharing. In TUES/CCLI proposals, dissemination strategies have commonly taken the form of the "3 Ps" (presenting, publishing and posting) , with overall modest impact. Since the seminal work of Everett Rogers, however, "diffusion" of innovations has been understood as an inherently social process among potential adopters, which interacts with community norms and existing practices. Keys to diffusion include close understanding of the needs and context of the potential-adopter community and the development of "pull" within it, as well as support for implementation of innovations. Potential approaches to facilitating diffusion of innovations include a) using "lean start-up" methodologies (e.g., NSF's I-Corps-L program), in which explicit business-model hypotheses are tested through customer-discovery interviews, commonly leading to pivots where initial hypotheses are not confirmed, b) providing a range of potential commitment levels for adopters tailored to levels of support ("reverse Kickstarter model"), c) supporting decentralized communities of practice in which adaptations and tacit knowledge can readily be shared, d) encouraging crowd-sourcing of innovations, with an "architecture of participation" informed by successful open-source projects, and e) integrating innovations with discipline-based educational research, e.g., big-data approaches which allow A/B testing and analysis of clickstream data that reveal behaviors along a novice

  17. Architectural design of passive solar residential building

    Directory of Open Access Journals (Sweden)

    Ma Jing

    2015-01-01

    Full Text Available This paper studies thermal environment of closed balconies that commonly exist in residential buildings, and designs a passive solar residential building. The design optimizes the architectural details of the house and passive utilization of solar energy to provide auxiliary heating for house in winter and cooling in summer. This design might provide a more sufficient and reasonable modification for microclimate in the house.

  18. Conduct of operations training - An innovative approach to team building

    International Nuclear Information System (INIS)

    Widen, W.C.; Kurth, W.; Broccolo, A.

    1987-01-01

    The conduct of nuclear power plant operations is a key parameter for station management and regulators alike. Indeed, the basic methods and demeanor in which operating crews approach overall plant operations is perhaps the principal factor leading to safe and efficient operations. Hence, Commonwealth Edison's Zion Station has initiated an innovative and positive training program designed to increase operator awareness of conducting station operations in an attentive, diligent, and conscientious manner. This Conduct of Operations Training Program is a collaborative joint effort between Commonwealth Edison and the Westinghouse Nuclear Training Center. In particular, the key managers of Zion's operating department brainstormed various philosophies and strategies with senior training staff members of the Westinghouse Nuclear Training Center. The outcome of these sessions has formed the skeleton of an intensified, one-day Conduct of Operations course. Several unique aspects of this innovative course are described

  19. Strategic collective system building by firms who launch sustainability innovations

    NARCIS (Netherlands)

    Maryse M.H. Chappin; Julia Planko; Marko P. Hekkert; Jacqueline M. Cramer

    2014-01-01

    The implementation of innovative sustainability technologies often requires far reaching changes of the macro environment in which the innovating firms operate. Strategic management literature describes that firms who want to commercialize an innovative technology can collaborate in networks or

  20. Simulation for (sustainable) building design: Czech experiences

    NARCIS (Netherlands)

    Bartak, M.; Drkal, F.; Hensen, J.L.M.; Lain, M.; Schwarzer, J.; Sourek, B.

    2001-01-01

    This paper attempts to outline the current state-of-the-art in the Czech Republic regarding the use of integrated building performance simulation as a design tool. Integrated performance simulation for reducing the environmental impact of buildings is illustrated by means of three recent HVAC

  1. Designing for health in school buildings

    DEFF Research Database (Denmark)

    Kirkeby, Inge Mette; Jensen, Bjarne Bruun; Larsen, Kristian

    2015-01-01

    Aim: To investigate the kinds of knowledge practitioners use when planning and designing for health in school buildings. Methods: Twelve semi-structured qualitative interviews were conducted with architects, teachers and officials to investigate use of knowledge in the making of school buildings...

  2. BIM uses for reversible building design

    NARCIS (Netherlands)

    van den Berg, Marc Casper; Durmisevic, Elma; Durmisevic, Elma

    2017-01-01

    The construction industry urgently needs new approaches to design buildings that can be incorporated in the circular economy. Buildings are still predominantly conceived as static structures with one end-of-life option, demolition, which typically results in excessive amounts of waste. To cut waste,

  3. Elements that contribute to healthy building design

    NARCIS (Netherlands)

    Loftness, V.; Hakkinen, B.; Adan, O.C.G.; Nevalainen, A.

    2007-01-01

    Abstract Background: The elements that contribute to a healthy building are multifactorial and can be discussed from different perspectives. Objectives: We present three viewpoints of designing a healthy building: the importance of sustainable development, the role of occupants for ensuring indoor

  4. Workshops in Dutch sustainable building design practice

    NARCIS (Netherlands)

    Zeiler, W.; Quanjel, E.M.C.J.; Borsboom, W.A.

    2009-01-01

    Within the present context of the Dutch Sustainable Building Practice it is hard for the different involved building design disciplines to give a good answer to sustainability. Especially this is the case for the application solar energy either in passive or active form. As traditional methods did

  5. Elements that contribute to healthy building design

    NARCIS (Netherlands)

    Loftness, V.; Hakkinen, B.; Adan, O.; Nevalainen, A.

    2007-01-01

    Background: The elements that contribute to a healthy building are multifactorial and can be discussed from different perspectives. Objectives: We present three viewpoints of designing a healthy building: the importance of sustainable development, the role of occupants for ensuring indoor air

  6. Design-Build Partnership Attributes Survey Analysis

    National Research Council Canada - National Science Library

    Pyle, Raymond

    1998-01-01

    Two basic hypotheses were investigated: 1. Finding these attributes for success for a design-build partnership may be accomplished by transferring concepts and ideas from business research on partnership formation. 2...

  7. Canister storage building natural phenomena design loads

    International Nuclear Information System (INIS)

    Tallman, A.M.

    1996-02-01

    This document presents natural phenomena hazard (NPH) loads for use in the design and construction of the Canister Storage Building (CSB), which will be located in the 200 East Area of the Hanford Site

  8. Critique of PEP interaction building design

    International Nuclear Information System (INIS)

    1988-01-01

    This note reviews the design of the interaction region 2, 8 and 12 buildings from the viewpoint of shielding adequacy, available space and amenities provided. Conclusions are drawn that the present design is not the best way to satisfy the requirements. An alternative design is proposed which, it is claimed, is a better solution to the problems without an increase in cost

  9. Innovative design method of automobile profile based on Fourier descriptor

    Science.gov (United States)

    Gao, Shuyong; Fu, Chaoxing; Xia, Fan; Shen, Wei

    2017-10-01

    Aiming at the innovation of the contours of automobile side, this paper presents an innovative design method of vehicle side profile based on Fourier descriptor. The design flow of this design method is: pre-processing, coordinate extraction, standardization, discrete Fourier transform, simplified Fourier descriptor, exchange descriptor innovation, inverse Fourier transform to get the outline of innovative design. Innovative concepts of the innovative methods of gene exchange among species and the innovative methods of gene exchange among different species are presented, and the contours of the innovative design are obtained separately. A three-dimensional model of a car is obtained by referring to the profile curve which is obtained by exchanging xenogeneic genes. The feasibility of the method proposed in this paper is verified by various aspects.

  10. Sustainability in School Building Design

    Directory of Open Access Journals (Sweden)

    B. Ece ŞAHİN

    2015-03-01

    Full Text Available Sustainable construction is important for the continuation of life in a healthy world for futuregenerations; many issues affecting the quality of life such as effective use of resources, take advantage ofrenewable energy, the choice of recyclable materials that do not harm the environment and waterconservation are considered in the context of sustainable design. Implementations carried out in thisframework are regarded as valuable due to providing the consciousness of sustainability to the society.Creating the awareness of sustainability is given a great importance by educators; thus, “education forsustainability” are included from the preschool program so that children can learn the gainings of suchperspective in their early ages. In support of this concept, it is believed that education structures should bea laboratory where children can practice theoretical knowledge learned at school. In that respect, studiesneed to be considered in the context of sustainable construction are studied in this research. In the study,after a description of the importance of sustainable design as a learning mean, significant subjects such asusing natural light, heating, cooling and air-conditioning methods, wind energy, water protection andmaterial selection are analyzed in terms of designing sustainable schools. It is criticized worldwide thatstructures ground on sustainable design principles are relatively few in numbers. Despite, there is anincreasing interest to the subject in Turkey later years; a lot more steps are required in terms ofimplementation and research of the issue. Thus, the purpose of the study is to provide a supplementaryreference for school designs.

  11. Fostering eco-innovation in SMEs through bridging research, education and industry for building a business oriented model

    Directory of Open Access Journals (Sweden)

    Hamburg Ileana

    2017-07-01

    Full Text Available Small and medium sized companies (SMEs assure economic growth in Europe. The Environmental Technologies Action Plan (ETAP concentrated and mobilized Member State and stakeholder efforts bringing eco-innovation from research to market, improving market conditions, opening up global markets. Rapid and reinforced actions are now required, building on the experience of ETAP helping SMEs to have benefits by introducing eco-innovative approaches into their operations. Particularly start-ups, can be the ideal incubators for eco-innovation, and can bring to market new, less environmentally damaging products, services and processes. Generally many SMEs are struggling to survive in an ongoing global recession and often they are becoming reluctant to release innovation, particularly eco-innovation (Assante et al., 2016. In this paper we present first the differences between eco-innovation based business models and those based on regular innovations. Secondly we give some approaches tested in national and European projects with participation of the authors in order to help SMEs to develop business models of eco-innovations. The first one is to build cooperation between researchers, educators and SME staff in order to explain SMEs the advantages of such models and to implement models designed by researchers. Secondly we used practice oriented forms of training for SMEs like Problem Based Learning (PBL as an efficient form for SMEs and entrepreneurship education to learn to solve problems like the building of an eco-innovation business model. Thirdly we use in our projects eco-innovation biographies (EIBs reflecting the evolutionary character of such innovations and the dynamics of related policy streams.

  12. User driven Innovation in new Workspace Design

    DEFF Research Database (Denmark)

    Bjerrum, Eva; Simonsen, John Brøndberg

    2017-01-01

    on experiences from several case studies we propose a way to unfreeze organisations. By using different methods to describe work (ethnographic methods: Observation, episodes, snapshots, photos) and traditional interviews and questionnaires, it is possible to plan and conduct workshop processes that challenge......In Denmark knowledge sharing and working flexibility are considered to be elements that contribute to innovation and improved competitiveness. This has resulted in more and more companies having introduced open flexible office design as a strategic tool to support knowledge sharing. Another reason...... for this focus on workspace design is the change in work and working patterns at knowledge organisations. Both managers and employees work at different places, at customer’s site, while travelling, at hotels and at home, so the focus on the company as being the main workplace changes. The change from traditional...

  13. Study on Product Innovative Design Process Driven by Ideal Solution

    Science.gov (United States)

    Zhang, Fuying; Lu, Ximei; Wang, Ping; Liu, Hui

    Product innovative design in companies today relies heavily on individual members’ experience and creative ideation as well as their skills of integrating creativity and innovation tools with design methods agilely. Creative ideation and inventive ideas generation are two crucial stages in product innovative design process. Ideal solution is the desire final ideas for given problem, and the striving reaching target for product design. In this paper, a product innovative design process driven by ideal solution is proposed. This design process encourages designers to overcome their psychological inertia, to foster creativity in a systematic way for acquiring breakthrough creative and innovative solutions in a reducing sphere of solution-seeking, and results in effective product innovative design rapidly. A case study example is also presented to illustrate the effectiveness of the proposed design process.

  14. Corporate Innovation Management Framework Based On Design Thinking

    DEFF Research Database (Denmark)

    Efeoglu, Arkin; Møller, Charles; Serie, Michel

    2014-01-01

    This paper proposes use of an Innovation Management Framework through the roll-out of Design Thinking in a multi-national company by applying adequately framed organizational governance. An Innovation Management Framework based on the principles of Design Thinking is providing central pillars...... that not only ensure effective governance. The elevation both from Innovation Management to foster Design Thinking and vice versa the Design Thinking characteristics that strengthen the corporate innovativeness through governance is in focus. With the latter in mind, this paper therefor looks on Innovation...... to be governed. An Innovation Management Framework with principles of DT may avoid uncoordinated innovation capabilities. Ultimately innovation will not be an R&D topic anymore but become part for every employee’s job, irrespective of his or her position. In a previous paper DT characteristics were evaluated...

  15. Proactive building simulations for early design support

    DEFF Research Database (Denmark)

    Østergård, Torben

    important design parameters that require the most attention when seeking to improve building performance. Fast metamodels facilitate immediate feedback on design changes and reduce time-consumption related to performance assessment. Ultimately, the work described in this thesis and on buildingdesign...... that relies on thousands of simulations representing the multidimensional design space. Interactive visualizations enable decision-makers to explore, in real-time, the vast design space and identify favorable solutions which satisfy the needs of different stakeholders. Sensitivity analysis helps reveal...

  16. Long-term monitoring and field testing of an innovative multistory timber building

    Science.gov (United States)

    Omenzetter, Piotr; Morris, Hugh; Worth, Margaret; Kohli, Varun; Uma, S. R.

    2011-04-01

    An innovative three-story timber building, using self-centering, post-tensioned timber shear walls as the main horizontal load resisting system and lightweight composite timber-concrete floors, has recently been completed in Nelson, New Zealand. It is expected to be the trailblazer for similar but taller structures to be more widely adopted. Performance based standards require an advanced understanding of building responses and in order to meet the need for in-situ performance data the building has been subjected to forced vibration testing and instrumented for continuous monitoring using a total of about 90 data channels to capture its dynamic and long-term responses. The first part of the paper presents a brief discussion of the existing research on the seismic performance of timber frame buildings and footfall induced floor vibrations. An outline of the building structural system, focusing on the novel design solutions, is then discussed. This is followed by the description of the monitoring system. The paper emphasizes the need for optimal placement of a limited number of sensors and demonstrates how this was achieved for monitoring floor vibrations with the help of the effective independence-driving point residue (EfI-DPR) technique. A novel approach to the EfI-DPR method proposed here uses a combinatorial search algorithm that increases the chances of obtaining the globally optimal solution. Finally, the results from the forced vibration tests conducted on the whole building at different construction stages are reviewed.

  17. Sustainable design in the contemporary architecture of tall buildings

    Directory of Open Access Journals (Sweden)

    Gil-Mastalerczyk Joanna

    2016-01-01

    Full Text Available The tall buildings in Singapore - one of the main financial centers of the world - reflect the metropolitan character of the city. These buildings emphasize the importance of the center in the urban landscape. They determine and create a new landscape of the city. Objects, mainly about the function of commercial and prestigious, distinguished by the natural environment-friendly image. Through financial expenditures, they excel in the implementation of innovative solutions in the field ecology. The applied design, facade systems and functional systems are subject to the use of renewable energy sources. Promoting the idea the development of the city “inside”. Ecological aspect is the durability of the structure. Modern tall buildings have completely changed the image of the spatial part of the city-state of Singapore and contributed to enhance the individual character and highlight the specifics of the layout and position of the center (combining functions of business, commercial, recreational and residential.

  18. Design experience on seismically isolated buildings

    International Nuclear Information System (INIS)

    Giuliani, G.C.

    1991-01-01

    This paper describes the practical problems associated with the structural design of seismically isolated buildings now under construction in Ancona, Italy. These structures are the first seismically isolated buildings in Italy. The Ancona region is in zone 2 of the Italian Seismic Code. It has a design acceleration of 0.07 g which corresponds to a ground surface acceleration of 0.25 g. The last significant earthquake was recorded on June 14, 1972, having a single shock-type wave with a peak acceleration of 0.53 g. Taking into account the aforesaid earthquake, the structural design of these new buildings was performed according to an acceleration spectrum which was different from the zone 2 seismic code and which provided protection for stronger ground motions. To minimize the cost of the structure, the buildings used ribbed plate decks, thus reducing the amount of material and the mass of the structures to be isolated. The design requirements, dynamic analysis performed, structural design, and practical engineering employed are reported in this paper. A comparison between the costs of a conventionally designed and a base-isolated structure is also reported. It shows a net savings of 7% for the base-isolated structure. The tests undertaken for certifying the mechanical properties of the isolators for both static and dynamic loads are also described, as is the full-scale dynamic test which is scheduled for next year (1990) for one of the completed buildings. (orig.)

  19. Design experience on seismically isolated buildings

    International Nuclear Information System (INIS)

    Giuliani, G.C.

    1989-01-01

    This paper describes the practical problems associated with the structural design of a group of seismically isolated buildings now under construction in Ancona, Italy. These structures are the first seismically isolated buildings in Italy. Taking into account previous earthquakes, the structural design of these new buildings was performed according to an acceleration spectrum which was different from its Zone 2 seismic code and which provided protection for stronger ground motions. To minimize the cost of the structure, the buildings used ribbed plate decks, thus reducing the amount of material and the mass of the structures to be isolated. The design requirements, dynamic analysis performed, structural design, and practical engineering employed are reported in this paper. A comparison between the costs of a conventionally designed and a base-isolated structure is also reported. The tests undertaken for certifying the mechanical properties of the isolators for both static and dynamic loads are also described, as is the full-scale dynamic test which is scheduled for next year (1990) for one of the completed buildings. Lessons learned in this design effort are potentially applicable to seismic base isolation for nuclear power plants

  20. Exploring an innovation project as source of change in organization design

    DEFF Research Database (Denmark)

    Brix, Jacob; Peters, Lois S.

    2015-01-01

    This study builds new empirically based theory on how the processing of an innovation project with a high degree of uncertainty induces change in key components in organization design. By using an embedded case study as our research strategy and organisation design theory as our analytical lens, we...

  1. [The architectural design of psychiatric care buildings].

    Science.gov (United States)

    Dunet, Lionel

    2012-01-01

    The architectural design of psychiatric care buildings. In addition to certain "classic" creations, the Dunet architectural office has designed several units for difficult patients as well as a specially adapted hospitalisation unit. These creations which are demanding in terms of the organisation of care require close consultation with the nursing teams. Testimony of an architect who is particularly engaged in the universe of psychiatry.

  2. SUSTAINABLE AND DESIGN BUILDING PROCESSES

    Directory of Open Access Journals (Sweden)

    Silvio F. R. MOTTA

    2009-05-01

    Full Text Available The article presents a historical revision of the sustainable development and the sustainable in the constructed environment. It describes the main concepts and practices for implantation of the sustainable in the civil construction. These concepts and practices are reviewed from the perspective of the dialectic method, the general theory of systems and the theories of creative processes. These concepts are also analyzed from the perspective of quality management. The article proposes a model based on the dialectic, in which sustainability is considered an open system and a search inventive. The implantation of the sustainable in projects, companies and design processes are considered as main strategy. A vertical insertion of the sustainable in the process is proposal. In this vertical insertion, the sustainable is presents in all the phases and activities of the process. The model is organized to promote the external creative solutions to the process, through the promotion of research centers. Tools of selection of possibilities and practical are suggested, considering the characteristic dialectics proposals. The article concludes that sustainable is a cultural change in the processes, practical and management current.

  3. BUILDING DESIGN INFLUENCE ON THE ENERGY PERFORMANCE

    Directory of Open Access Journals (Sweden)

    Moga Ligia

    2015-05-01

    Full Text Available Energy efficient design is a high priority in the national energy strategy of European countries considering the latest requirements of the European Directive on the Energy Performance of Buildings. The residential sector is responsible for a significant quantity of energy consumptions from the total amount of consumptions on a worldwide level. In residential building most of the energy consumptions are given mainly by heating, domestic hot water and lighting. Retrofitting the existing building stock offers great opportunities for reducing global energy consumptions and greenhouse gas emissions. The first part of the paper will address the need of thermal and energy retrofit of existing buildings. The second part will provide an overview on how various variables can influence the energy performance of a building that is placed in all four climatic zones from Romania. The paper is useful for specialist and designers from the construction field in understanding that buildings behave differently from the energy point of view in different climatic regions, even if the building characteristic remain the same.

  4. Innovation Barriers and Enablers that Affect Productivity in Uganda Building Industry

    OpenAIRE

    Henry Mwanaki Alinaitwe, , and; Kristian Widén; Jackson Mwakali; Bengt Hansson

    2007-01-01

    The construction industry has of recent been blamed for lack of innovation. Lack of innovation in the industry is believed to be responsible for the decreasing or stagnant levels of productivity in comparison with other industries. This paper reviews the major barriers and enablers to innovation in general. Propositions were made about the factors that affect innovation in the construction industry which were then formulated into a questionnaire. A survey was made on building contractors in U...

  5. Building new competencies for new business creation based on breakthrough technological innovations

    OpenAIRE

    Vanhaverbeke, W.P.M.; Kirschbaum, R.

    2003-01-01

    This paper focuses on the question how companies can build new capabilities or competencies based on discontinuous technological innovations? In particular, we analyze how corporate ventures are set up to develop and commercialize these radical innovations can play a crucial role in the process of building new competencies (not only technological capabilities). New competencies are in turn the basis to create a range of new businesses. Building and deploying competencies are intrinsically rel...

  6. Strategic collective system building to commercialize sustainability innovations

    NARCIS (Netherlands)

    Planko, J.; Cramer, J.M.; Chappin, M.M.H.; Hekkert, M.P.

    2016-01-01

    The implementation of innovative sustainability technologies often requires far-reaching changes of the macro environment in which the innovating firms operate. Strategic management literature demonstrates that the chances of a successful diffusion and adoption of an innovative technology in society

  7. An innovative discrete multilevel sampler design

    International Nuclear Information System (INIS)

    Marvin, B.K.; De Clercq, P.J.; Taylor, B.B.; Mauro, D.M.

    1995-01-01

    An innovative, small-diameter PVC discrete multilevel sampler (DMLS) was designed for the Electric Power Research Institute (EPRI) to provide low-cost, discrete groundwater samples from shallow aquifers. When combined with appropriately-sized direct push soil sampling technologies, high resolution aquifer characterization can be achieved during initial site assessment or remediation monitoring activities. The sampler is constructed from 1-inch diameter PVC well materials, containing polyethylene tubing threaded through PVC disks. Self-expanding annular and internal bentonite seals were developed which isolate discrete sampling zones. The DMLS design allows customization of sampling and isolation zone lengths to suit site-specific goals. Installation of the DMLS is achieved using a temporary, expendable-tipped casting driven by direct push methods. This technique minimizes mobilization costs, site and soil column disturbances, and allows rapid installation in areas of limited overhead clearance. Successful pilot installations of the DMLS prototype have been made at a former manufactured gas plant (MGP) site and a diesel fuel spill site. Analysis of groundwater samples from these sites, using relative compound distributions and contaminant concentration profiling, confirmed that representative discrete samples were collected. This design provides both economical and versatile groundwater monitoring during all phases of site assessment and remediation

  8. Building Innovation and Sustainability in Programs of Research.

    Science.gov (United States)

    Villarruel, Antonia M

    2018-01-01

    Innovation and sustainability are two important concepts of impactful programs of research. While at first glance these concepts and approaches may seem at odds, they are synergistic. We examine the social, political, and policy context as it relates to innovation and sustainability. We present an exemplar of a program of research and discuss factors to consider in developing innovative and sustainable programs of research. Innovation is an important component of sustainable programs of research. Understanding the social and political context and addressing relevant policy issues are factors to be considered in both innovation and sustainability. Innovation and sustainability, important components of research, are also central to clinical practice. Open communication between researchers and clinicians can support the acceleration of innovations and the integration of evidence-based findings in practice. © 2017 Sigma Theta Tau International.

  9. Capturing the value of design thinking in different innovation practices

    NARCIS (Netherlands)

    Kleinsmann, M.S.; Valkenburg, Rianne; Sluijs, Janneke

    2017-01-01

    Design thinking has become a popular notion in the field of innovation. What is design thinking really and—even more important—what could be its value in applying it in innovation practices? This paper presents four studies that together capture the value of design thinking in different

  10. Simulation-based support for product development of innovative building envelope components

    NARCIS (Netherlands)

    Loonen, R.C.G.M.; Singaravel, S.; Trcka, M.; Costola, D.; Hensen, J.L.M.

    2014-01-01

    A need for innovation in building envelope technologies forms a key element of technology roadmaps focusing on improvements in building energy efficiency. Many new products are being proposed and developed, but often, a lack of insights into building integration issues is an obstacle in typical

  11. An innovative roofing system for tropical building interiors: Separating heat from useful visible light

    Energy Technology Data Exchange (ETDEWEB)

    Al-Obaidi, K.M.; Ismail, M.; Abdul Rahman, A.M. [School of Housing, Building and Planning, Universiti Sains Malaysia, 11800, Minden, Pulau Pinang (Malaysia)

    2013-07-01

    Generally it has been known that energy consumption costs are high in temperate countries. In buildings, room spaces are normally designed so as to consume less energy for thermal comfort especially in winter. Passive strategies such large double-glazing windows are to contain heat indoors and also for maximum daylight to reduce dependence on artificial lighting. Thus roof lights are popular building design elements in cold and temperate countries. Unlike in the tropics where it has high temperatures and humidity throughout the year, achieving indoor comfort is a challenge especially with plenty of sunshine and unpredictable wind conditions. This paper explores the possibility of roof light for indoor comfort to be considered as a tropical design element. Initial simulation was carried out before any attempt to do life-sized model for empirical data. By simulation, the hypothesis has been achieved but several factors have to be considered. The solution is not as simple as those achieved in the temperate countries. Comfort can be achieved but permutations of several design factors such as dimensions of room, glazing, reflective materials, blackbody concept and building materials need adjustment to meet the Malaysian Comfort Temperature. With this finding the Tropical Architecture would then be redefined with the introduction of this Innovative Roofing System (IRS) as named by the author.

  12. Innovative Strategies for Building Community Resilience: Lessons from the Frontlines of Climate Change Capacity-Building

    Science.gov (United States)

    Abrash Walton, A.

    2017-12-01

    There is broad scientific consensus that climate change is occurring; however, there is limited implementation of measures to create resilient local communities (Abrash Walton, Simpson, Rhoades, & Daniels, 2016; Adger, Arnell, & Tompkins, 2005; Glavovic & Smith, 2014; Moser & Ekstrom, 2010; Picketts, Déry, & Curry, 2014). Communities that are considered climate leaders in the United States may have adopted climate change plans, yet few have actually implemented the policies, projects and recommendations in those plans. A range of innovative, education strategies have proven effective in building the capacity of local decision makers to strengthen community resilience. This presentation draws on the results of two years of original research regarding the information and support local decision makers require for effective action. Findings are based on information from four datasets, with more than 600 respondents from 48 U.S. states and 19 other countries working on local adaptation in a range of capacities. These research results can inform priority setting for public policy, budget setting, and action as well as private sector funding and investment. The presentation will focus, in particular, on methods and results of a pioneering Facilitated Community of Practice model (FCoP) for building climate preparedness and community resilience capacity, among local-level decision makers. The FCoP process includes group formation and shared capacity building experience. The process can also support collective objective setting and creation of structures and processes for ongoing sustainable collaboration. Results from two FCoPs - one fully online and the other hybrid - suggest that participants viewed the interpersonal and technical assistance elements of the FCoP as highly valuable. These findings suggest that there is an important need for facilitated networking and other relational aspects of building capacity among those advancing resilience at the local level.

  13. Design innovations in neutron and gamma detectors

    International Nuclear Information System (INIS)

    Prasad, K.R.

    2003-01-01

    Neutron and gamma radiation needs to be monitored in most nuclear installations since it is highly penetrating. On-line monitoring of these radiations is very important for the safe and controlled operation of nuclear reactors, accelerators etc. Several design innovations have been carried out on gas ionisation detectors such as boron-lined proportional counters and ion chambers, fission detectors, gamma ion chambers as well as self-powered detectors. The use of additional structures within boron-lined detectors has enhanced their neutron sensitivity without a corresponding increase in the unwanted gamma sensitivity. The neutron sensitivity of fission counters can be enhanced by designing them as transmission line devices. Ion chambers with two and six pairs of electrodes have been developed for monitoring pulsed x-ray background at accelerator areas. Ion chambers have been employed at gamma fields up to 80 kR/h by deriving the exposure levels on-line using microcontroller devices programmed on the basis of theoretical and empirical formulas. The use of gas electron multiplier foils is proposed for charge multiplication in ion chambers. Self-powered detectors with new emitter materials like Hi, Ni and Inconel have been developed. (author)

  14. Y-12 Sustainable Design Principles for Building Design and Construction

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, J. G.

    2008-11-01

    B&W Y-12 is committed to modernizing the Y-12 complex to meet future needs with a sustainable and responsive infrastructure and to integrating sustainability principles and practices into Y-12 work (Y72-001, B&W Y-12 Environmental, Safety and Health Policy). This commitment to sustainability and specifically sustainable design of buildings is also incorporated into Presidential Executive Orders (EO), DOE Orders (DOE O), and goals. Sustainable building design is an approach to design, construct, and operate facilities in an efficient and environmentally sound manner that will produce a healthful, resource-efficient and productive working environment that is inherently protective of the environment. The DOE has established the following 5 Guiding Principles for High Performance Sustainable Building (HPSB), and has issued directives that require Y-12 to incorporate the principles and a number of supporting specific practices and techniques into building design, construction and renovation projects: (1) Employ Integrated Design Principles; (2) Optimize Energy Performance; (3) Protect and Conserve Water; (4) Enhance Indoor Environmental Quality; and (5) Reduce Environmental Impact of Materials. The purpose of this document is to present the required sustainable building principles, practices and techniques, summarize the key drivers for incorporating them into Y-12 projects, and present additional recommendations and resources that can be used to support sustainable buildings to enhance the environmental and economic performance of the Y-12 Complex.

  15. Innovation

    DEFF Research Database (Denmark)

    Nielsen, Janni; Yaganeh, Suzanne; Bloch Rasmussen, Leif

    2013-01-01

    This paper contributes to a theoretical discussion of creation of innovation with participants in, or outside, organisations. We address the creation of innovation with a complex theoretical understanding drawing on the Scandinavian and the Participatory Design tradition introducing two approaches...... to the processes of innovation. We ask if innovation can be initiated and enhanced looking at two collaborative approaches; participatory innovation (PIN) and cooperative innovation (COIN). We invite to dialogue and reflections on PIN’s conflict and creative frictions on one side and COIN’s complexity......, complementarity in diversity and the didactic scaffolding of the innovation process on the other side. Our contribution focuses on the methods and practices for facilitation of co-creating activities between different groups leading to cooperation, and innovation in thinking....

  16. Integrated Energy Design of the Building Envelope

    DEFF Research Database (Denmark)

    Nielsen, Martin Vraa

    This thesis describes the outcome of the PhD project Integrated energy design of the building envelope carried out through a combination of scientific dissemination reported through peer-reviewed journals and a wide range of affiliated projects involved in at an architectural firm. The research...

  17. Innovative Development of Building Materials Industry of the Region Based on the Cluster Approach

    Directory of Open Access Journals (Sweden)

    Mottaeva Asiiat

    2016-01-01

    Full Text Available The article discusses issues of innovative development of building materials industry of the region based on the cluster approach. Determined the significance of regional cluster development of the industry of construction materials as the effective implementation of the innovative breakthrough of the region as an important part of strategies for strengthening innovation activities may be to support the formation and development of cluster structures. Analyses the current situation with innovation in the building materials industry of the region based on the cluster approach. In the course of the study revealed a direct correlation between involvement in innovative activities on a cluster basis, and the level of development of industry of construction materials. The conducted research allowed identifying the factors that determine the innovation process, systematization and classification which determine the sustainable functioning of the building materials industry in the period of active innovation. The proposed grouping of innovations for the construction industry taking into account industry-specific characteristics that reflect modern trends of scientific and technological progress in construction. Significance of the study lies in the fact that the proposals and practical recommendations can be used in the formation mechanism of innovative development of building materials industry and the overall regional construction complex of Russian regions by creating clusters of construction.

  18. Indoor air quality – buildings design

    Directory of Open Access Journals (Sweden)

    Juhásová Šenitková Ingrid

    2017-01-01

    Full Text Available Growing attention is being paid to indoor air quality as one of the main health and well-being factors. The indoor research is concerned mostly to indoor air chemicals within indoor engineering related to building design. The providing good indoor air quality can be achieved effectively by avoiding or reducing indoor air pollution sources and by selecting low-polluting building materials, both being low-cost and energyefficient solutions. On the base of the last large experimental monitoring results, it was possible to know the level of selected indoor chemicals occurrence, rank them as well as to predict the tendencies of occurrence and establish the priorities for the future. There has been very limited attention to rigorous analysis of buildings actual environmental impacts to date. Healthy/green/sustainable building practices are typically applied in unsystematic and inconsistent ways often without resolution of inherent conflicts between and among such practices. Designers, products manufacturers, constructors, and owners declare their buildings and the applied technologies to be beneficial to the environment without validating those claims.

  19. New perspectives on design and innovation

    DEFF Research Database (Denmark)

    Alting, Leo; Clausen, Christian; Jørgensen, Ulrik

    2007-01-01

    The paper reflects on research perspectives dealing with the incorporation of knowledge on use, users, customers and market in the entire innovation process. The point will be made that the support of user oriented innovation processes will have to deal with development of new approaches, methods...

  20. Energy-Performance-Based Design-Build Process: Strategies for Procuring High-Performance Buildings on Typical Construction Budgets: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Scheib, J.; Pless, S.; Torcellini, P.

    2014-08-01

    NREL experienced a significant increase in employees and facilities on our 327-acre main campus in Golden, Colorado over the past five years. To support this growth, researchers developed and demonstrated a new building acquisition method that successfully integrates energy efficiency requirements into the design-build requests for proposals and contracts. We piloted this energy performance based design-build process with our first new construction project in 2008. We have since replicated and evolved the process for large office buildings, a smart grid research laboratory, a supercomputer, a parking structure, and a cafeteria. Each project incorporated aggressive efficiency strategies using contractual energy use requirements in the design-build contracts, all on typical construction budgets. We have found that when energy efficiency is a core project requirement as defined at the beginning of a project, innovative design-build teams can integrate the most cost effective and high performance efficiency strategies on typical construction budgets. When the design-build contract includes measurable energy requirements and is set up to incentivize design-build teams to focus on achieving high performance in actual operations, owners can now expect their facilities to perform. As NREL completed the new construction in 2013, we have documented our best practices in training materials and a how-to guide so that other owners and owner's representatives can replicate our successes and learn from our experiences in attaining market viable, world-class energy performance in the built environment.

  1. Integrated energy design of the building envelope

    Energy Technology Data Exchange (ETDEWEB)

    Vraa Nielsen, M.

    2012-07-01

    This thesis describes the outcome of the PhD project Integrated energy design of the building envelope carried out through a combination of scientific dissemination reported through peer-reviewed journals and a wide range of affiliated projects involved in at an architectural firm. The research project analysed how the implementation of technical knowledge early in the building design process can quantify the effect of a building's facades on its energy efficiency and indoor climate and thereby facilitate a more qualified design development. The project was structured in the following way: 1) the importance of integrating knowledge in the early stages of design, and how it can be done; 2) understanding the facade's typology; and 3) the complex notion of comfort. The project touched not only on the technical capabilities and requirements governing facade design, but also the process by which it takes place. This was done by applying the methodology of Integrated Energy Design (IED) and analysing its applicability in the design of facades. A major part of the project was an actual engagement in the architectural process to test out incorporating a consciousness about energy and comfort as part of a more holistic performance evaluation. The research project illustrates the great potential in taking passive properties into account through a geometrical optimisation inherent in the development of the architectural concept. It demonstrates that integration of technical knowledge at the early stages of design not only can qualify the geometrical processing, but also facilitate the design development of the facade. Thereby a more holistic performance optimisation can be obtained through parameters such as overall facade geometry and orientation, functional organisation, room height and depth, facade layout, window geometry and transparency, design of the window aperture, etc. Through the wide range of affiliated project involved in at the architectural firm over

  2. Innovation by design lessons from post box design & development

    CERN Document Server

    Chakravarthy, Battula Kalyana

    2013-01-01

    The book provides an in-depth knowledge on how a product is designed and developed by Product Designers. This has been achieved through a case study of one product – the Post Box. This product was chosen for the study primarily due to its simple and non-technical nature as that would make it easy for the readers to comprehend the design process. At the same time the Post Box posed all the challenges a designer would face while creating a new product. Through a step by step process the book gradually takes the reader through the design and development journey – right from understanding the product, identifying the user need through market research, comprehending client’s brief, generating product ideas and concepts to development of prototype, manufacturing and final performance of the product. The book illustrates the stages in the design process that lead to innovation which is applicable to all types of products. To make the book more stimulating, interesting facts, figures and pictures on related iss...

  3. Designing for social innovation in a prison context

    DEFF Research Database (Denmark)

    Aakjær, Marie Kirstejn

    as a learning outcome, where changes in perceptions, creation of trust and the process of collaborative sense making are pivotal for change and innovation. This is conceptualised as social innovation and it is argued that the concept of social innovation in the prison and probation service presuppose...... the inclusion of human and relational elements. It is concluded that design approaches may serve as levers for social innovation, taking into consideration the interconnectedness of relations, values and assumptions of the innovators and competence in practice....

  4. Collective innovative practice through user-centred design thinking

    DEFF Research Database (Denmark)

    Poulsen, Søren Bolvig; Lassen, Astrid Heidemann; Wandahl, Søren

    2012-01-01

    Establishing a collective innovative practice within a value chain is vital as competition often takes place between supply chains rather than individual companies (Lambert, 2006). This requires new new innovative approaches and an adaptive learning culture (Tyre and von Hippel 1997). User driven...... innovation has added significant aspects to the field of innovation management (e.g. Chesbrough, 2003) and companies can innovate with user collaboration or amplified notion of user together with hybrid collaborative constellations and new ways of working (von Hippel 2005). This paper examines how design...

  5. When innovative instructional designs are too innovative: lack of schema

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas; Wahl, Christian

    2015-01-01

    and it was developed to motivate and encourage the students to engage in more situated learning processes. The course is infamous for low attendance and for demotivating the students; hence the new instructional design should motivate students to attend the lessons and to participate. The new instructional design...

  6. Cork Design : A Design Action Intervention Approach Towards Sustainable Product Innovation

    NARCIS (Netherlands)

    Mestre, A.C.C.M.

    2014-01-01

    The study Cork Design: A Design Action Intervention Approach Towards Sustainable Product Innovation comprises the systematic implementation of sustainable product innovation within the Portuguese cork sector, through action research. Cork is a natural, recyclable, non-toxic, and renewable resource,

  7. Collective Innovation Practice through User-centred Design Thinking

    DEFF Research Database (Denmark)

    Poulsen, Søren Bolvig; Lassen, Astrid Heidemann; Wandahl, Søren

    2012-01-01

    thinking with its principles and mind-set can facilitate a common and collaborative effort within a value chain towards a joint innovative practice. Design thinking is unfolded through existing literature and it’s virtue as a facilitating and joining approach is tested through the application within...... the research project Innodoors. It is concluded user-centred material through the video media can enable practitioners from a value chain to establish a common understanding of innovation paths – potential directions for innovation. In addition it is concluded that design thinking can be adapted...... innovation has added significant aspects to the field of innovation management (e.g. Chesbrough, 2003) and companies can innovate with user collaboration or amplified notion of user together with hybrid collaborative constellations and new ways of working (von Hippel 2005). This paper examines how design...

  8. CAPACITY BUILDING OF TEACHERS THROUGH DISTANCE MODE USING TELECONFERENCEING AS AN INNOVATIVE TOOL

    Directory of Open Access Journals (Sweden)

    Manas RANJAN PANIGRAHI

    2012-04-01

    Full Text Available Sarva Shiksha Abhiyan (SSA is a national programme to the goals of Universalization of Elementary Education in India. Distance Education Programme (DEP plays a major role in providing technical support to the states in building capacity among institutions and people at national, state, district and sub-district levels to design, develop, produce and deliver distance learning inputs and materials in a recurrent manner. Rajasthan Council of Primary Education, Jaipur and DEP-SSA, IGNOU, New Delhi has organized 07 content based teleconferences during the period January, 2005 to October, 2005 for the capacity building of elementary school teachers. The main Objective of the study was to find out the effectiveness of the capacity building of teachers through distance mode using teleconferencing as an innovative tool. Method: the researcher was used survey method under descriptive research for investigating the impact of teleconference programmes organized on different topics and areas. Sample: The sample consists of 4775 elementary school teachers as participants from the different learning ends of the Rajasthan were selected for the study. Tools: The DEP-SSA, IGNOU developed structured opinionnaire/feedback format to know the effectiveness of teleconference programme. Data analysis: The collected data were tabulated and analyzed with the percentage techniques and it is presented in table. Finding: Most of the teacher respondents agreed on the positive contribution of teleconferencing towards capacity building of teachers.

  9. Training for Innovation: Capacity-Building in Agricultural Research in Post-War Sierra Leone

    Science.gov (United States)

    Gboku, Matthew L. S.; Bebeley, Jenneh F.

    2016-01-01

    This paper examines how the Sierra Leone Agricultural Research Institute (SLARI) used training and development to build capacity for innovation in agricultural research following the country's civil war which ended in 2002. The Institute's training for innovation addressed different agricultural product value chains (APVCs) within the framework of…

  10. Building new competencies for new business creation based on breakthrough technological innovations

    NARCIS (Netherlands)

    Vanhaverbeke, W.P.M.; Kirschbaum, R.

    2003-01-01

    This paper focuses on the question how companies can build new capabilities or competencies based on discontinuous technological innovations? In particular, we analyze how corporate ventures are set up to develop and commercialize these radical innovations can play a crucial role in the process of

  11. An innovative textbook: design and implementation.

    Science.gov (United States)

    Ortega, Rafael; Akhtar-Khavari, Vafa; Barash, Paul; Sharar, Sam; Stock, M Christine

    2017-12-01

    The 'flipped classroom' instructional strategy has gained much momentum in educational discourse, yet no single educational offering exists in postgraduate medical education (PME) to systematically replace the lecture element of didactic sessions. This article describes the design and implementation of Clinical Anesthesia Fundamentals, the first known textbook in PME addressing this gap in resources through the integration of full-length interactive multimedia-enhanced video lectures. The 'flipped classroom' instructional strategy has gained much momentum in educational discourse INNOVATION: The textbook was developed in alignment with the content outline for the specialty provided by the American Board of Anesthesiology. Its accompanying video lectures, produced at the Media Lab in the Department of Anesthesiology at Boston University Medical Center (BUMC), cover the topics in each chapter of the textbook and include review questions featuring explanatory feedback. Following a 5-month trial period at the BUMC Anesthesiology Residency Program, the complete resident class (25 of 25; 100%) participated in an anonymous, Institutional Review Board (IRB) -approved, five-point Likert-type scale survey assessing an underlying variable of preference for the use of multimedia learning tools. Survey results suggest that residents favour technology-enhanced learning environments in which textbooks are coupled with interactive multimedia, and the 'flipped classroom' approach is employed. Although the development of digital videos requires time and financial investment, the improved accessibility and uniform delivery of didactic content are two positive outcomes. This textbook provides an example for educators wishing to learn how to capitalise on advances in technology to further enhance learning and accessibility. Further studies could address the impact of this approach on the academic performance of residents. © 2016 John Wiley & Sons Ltd and The Association for the Study

  12. Building Better Homes: Government Strategies for Promoting Innovation in Housing

    National Research Council Canada - National Science Library

    Hassell, Scott

    2003-01-01

    This report examines the structure, characteristics, and motivations of major participants in the housing industry to explore how innovation might be improved or accelerated within the industry as it currently exists...

  13. Building Better Homes: Government Strategies for Promoting Innovation in Housing

    National Research Council Canada - National Science Library

    Hassell, Scott

    2003-01-01

    .... In this context, the report identifies options and strategies for the federal government to consider as it continues to further advance innovation in housing to make homes more affordable, durable...

  14. Research and exploration of product innovative design for function

    Science.gov (United States)

    Wang, Donglin; Wei, Zihui; Wang, Youjiang; Tan, Runhua

    2009-07-01

    Products innovation is under the prerequisite of realizing the new function, the realization of the new function must solve the contradiction. A new process model of new product innovative design was proposed based on Axiomatic Design (AD) Theory and Functional Structure Analysis (FSA), imbedded Principle of Solving Contradiction. In this model, employ AD Theory to guide FSA, determine the contradiction for the realization of the principle solution. To provide powerful support for innovative design tools in principle solution, Principle of Solving Contradiction in the model were imbedded, so as to boost up the innovation of principle solution. As a case study, an innovative design of button battery separator paper punching machine has been achieved with application of the proposed model.

  15. A mobile design lab for user-driven innovation

    DEFF Research Database (Denmark)

    Christiansen, Ellen; Kanstrup, Anne Marie

    2007-01-01

    The paper presents the history and conceptual foundation for the Mobile Design Lab, ment to support both designers and users in the acts of user-driven innovation. The Mobile Design Lab is based on Vygotsky's theory of tool- and language-mediation, and was created in 2004 to support research...... and teaching of user driven innovation. Being itself an example of user-driven innovation it has taken shape of HCI design research projekcts, in which we have been involved since 2004. The first challenge was to get 'out of the lab', the next to get 'out of the head', and finally we are currently working...

  16. Elements That Contribute to Healthy Building Design

    Science.gov (United States)

    Loftness, Vivian; Hakkinen, Bert; Adan, Olaf; Nevalainen, Aino

    2007-01-01

    Background The elements that contribute to a healthy building are multifactorial and can be discussed from different perspectives. Objectives We present three viewpoints of designing a healthy building: the importance of sustainable development, the role of occupants for ensuring indoor air quality, and ongoing developments related to indoor finishes with low chemical emissions and good fungal resistance. Discussion Sustainable design rediscovers the social, environmental, and technical values of pedestrian and mixed-use communities, using existing infrastructures including “main streets” and small-town planning principles and recapturing indoor–outdoor relationships. This type of design introduces nonpolluting materials and assemblies with lower energy requirements and higher durability and recyclability. Building occupants play a major role in maintaining healthy indoor environments, especially in residences. Contributors to indoor air quality include cleaning habits and other behaviors; consumer products, furnishings, and appliances purchases, as well as where and how the occupants use them. Certification of consumer products and building materials as low-emitting products is a primary control measure for achieving good indoor air quality. Key products in this respect are office furniture, flooring, paints and coatings, adhesives and sealants, wall coverings, wood products, textiles, insulation, and cleaning products. Finishing materials play a major role in the quality of indoor air as related to moisture retention and mold growth. Conclusions Sustainable design emphasizes the needs of infrastructure, lower energy consumption, durability, and recyclability. To ensure good indoor air quality, the product development for household use should aim to reduce material susceptibility to contaminants such as mold and should adopt consumer-oriented product labeling. PMID:17589608

  17. Elements that contribute to healthy building design.

    Science.gov (United States)

    Loftness, Vivian; Hakkinen, Bert; Adan, Olaf; Nevalainen, Aino

    2007-06-01

    The elements that contribute to a healthy building are multifactorial and can be discussed from different perspectives. WE PRESENT THREE VIEWPOINTS OF DESIGNING A HEALTHY BUILDING: the importance of sustainable development, the role of occupants for ensuring indoor air quality, and ongoing developments related to indoor finishes with low chemical emissions and good fungal resistance. Sustainable design rediscovers the social, environmental, and technical values of pedestrian and mixed-use communities, using existing infrastructures including "main streets" and small-town planning principles and recapturing indoor-outdoor relationships. This type of design introduces nonpolluting materials and assemblies with lower energy requirements and higher durability and recyclability. Building occupants play a major role in maintaining healthy indoor environments, especially in residences. Contributors to indoor air quality include cleaning habits and other behaviors; consumer products, furnishings, and appliances purchases, as well as where and how the occupants use them. Certification of consumer products and building materials as low-emitting products is a primary control measure for achieving good indoor air quality. Key products in this respect are office furniture, flooring, paints and coatings, adhesives and sealants, wall coverings, wood products, textiles, insulation, and cleaning products. Finishing materials play a major role in the quality of indoor air as related to moisture retention and mold growth. Sustainable design emphasizes the needs of infrastructure, lower energy consumption, durability, and recyclability. To ensure good indoor air quality, the product development for household use should aim to reduce material susceptibility to contaminants such as mold and should adopt consumer-oriented product labeling.

  18. Strategies for innovation in multicomponent reaction design.

    Science.gov (United States)

    Ganem, Bruce

    2009-03-17

    By generating structural complexity in a single step from three or more reactants, multicomponent reactions (MCRs) make it possible to synthesize target compounds with greater efficiency and atom economy. The history of such reactions can be traced to the mid-19th century when Strecker first produced alpha-aminonitriles from the condensation of aldehydes with ammonia and hydrogen cyanide. Recently, academic chemists have renewed their interest in MCRs. In part, the pharmaceutical industry has fueled this resurgence because of the growing need to assemble libraries of structurally complex substances for evaluation as lead compounds in drug discovery and development programs. The application of MCRs to that increasingly important objective remains limited by the relatively small number of such reactions that can be broadly applied to prepare biologically relevant or natural-product-like molecular frameworks. We were interested in applying logic-based approaches, such as our single reactant replacement (SRR) approach, as a way both to improve known MCRs and to design new multiple-component routes to bioactive structures. This Account provides several examples that illustrate the use of SRR with known MCRs as starting points for synthetic innovation in this area. As part of our working hypothesis, we initially explored strategies for engineering improvements into known MCRs, either by increasing the dimensionality--that is, changing an n-component to an (n + 1)-component reaction--or broadening the scope of useful input structures, or both. By exhaustively applying retrosynthetic analysis to the cognate MCR to identify and exploit alternative entry points into the overall reaction manifold, we have devised several such re-engineered MCRs. Serendipitous findings have also augmented the yield of useful developments from our logic-inspired approach. In some cases, we have identified surprising links between different compound families that provide useful new entry points

  19. Accelerating the green agenda through innovative building technologies

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2015-08-01

    Full Text Available facilities. However, the delivery process associated with conventional building technologies, i.e., brick and mortar, is slow due, in large part, to the technology requirements (diverse and plentiful building systems, products and components assembled... in countries that have a tradition of brick and mortar construction. However the market penetration of IBT is increasing in the latter markets in response to the pressures emanating from raw materials scarcity, the demand for higher performing buildings...

  20. LASER CUTTING AS AN INNOVATIVE CREATIVITY TOOL IN TEXTILE DESIGN

    Directory of Open Access Journals (Sweden)

    Banu Hatice Gurcum

    2016-12-01

    Full Text Available Innovative technologies have become the most widespread rapid and flexible technique of cutting, welding, printing and coloring in fashion and textile sectors in a very short time. Laser systems as the most common used innovative technology engrave, cut, form, print, shade appropriated formatted drawings and sketches as well as they provide reliable placements for the lay out plans and precision cutting and the production sector rapid and qualified. The practical applications and conveniences that innovative Technologies employ, influence design process, designers can design in a more creative, rapid, precise and effective manner. Although design is a context where technology is effective, the style, mood and the background of the designer is still important. Designers while making innovative studies should take the advantage of the developing technologies in experimental processes and should combine technological opportunities with aesthetics. Textile designer as in all other domains of design, should harmonise with the change and should define his/her style with the innovative Technologies in an innovative manner and renew him/herself all the time. This study aims to classify laser cutting technology applications available in textile and fashion sector as well as to present the laser technology as a means of process, product, material innovation and explains the contributions of laser systems to creativity.

  1. The Influence of Building Codes on Recreation Facility Design.

    Science.gov (United States)

    Morrison, Thomas A.

    1989-01-01

    Implications of building codes upon design and construction of recreation facilities are investigated (national building codes, recreation facility standards, and misperceptions of design requirements). Recreation professionals can influence architectural designers to correct past deficiencies, but they must understand architectural and…

  2. Social innovation education: towards a framework for learning design

    OpenAIRE

    Alden Rivers, Bethany; Armellini, Alejandro; Maxwell, Rachel; Allen, Sue; Durkin, Chris

    2015-01-01

    Purpose—This paper proposes a theoretical framework to support the embedding of social innovation education in existing academic programmes.\\ud Design/methodology/approach—By adopting Conole et al.’s (2004) methodological approach to reviewing, mapping and modelling learning theory, this study addresses four research questions: 1) How can social innovation education be defined? 2) Which learning theories best support social innovation education? 3) How do such learning theories relate to exis...

  3. A Contradiction-Based Approach for Innovative Product Design

    Directory of Open Access Journals (Sweden)

    Ko Yao-Tsung

    2016-01-01

    Full Text Available Without creativity in design there is no potential for innovation. This paper investigates the role of contradictions in enhancing creativity in product design. Based on the inventive principles of TRIZ, this paper presents a novel design method by integrating technical and physical contradiction analysis methods into the conceptual design activities of new product development (NPD. Despite the recognized importance of innovative design, there is a lack of the systematic and effective design-thinking process that can covers all conceptual design activities. To address this gap, a sharper and fundamental model of the problem-solving is created for innovative product design based on the contradiction-oriented concept. Eventually, one case study is employed to illustrate the method and the result validates that it can help designers produce more creative outcomes in product design.

  4. Building performance simulation for sustainable building design and operation

    NARCIS (Netherlands)

    Hensen, J.L.M.

    2011-01-01

    This paper aims to provide a general view of the background and current state of building performance simulation, which has the potential to deliver, directly or indirectly, substantial benefits to building stakeholders and to the environment. However the building simulation community faces many

  5. Complexities in building innovation systems : the case of radical medical technologies

    NARCIS (Netherlands)

    Kukk, P.

    2016-01-01

    The main goal of this thesis is to facilitate a further understanding of how firms behind innovative technologies deal with different complexities in system-building strategies and the co-dependencies among different technologies, actors and system-building activities, while contributing to the

  6. Global optimization framework for solar building design

    Science.gov (United States)

    Silva, N.; Alves, N.; Pascoal-Faria, P.

    2017-07-01

    The generative modeling paradigm is a shift from static models to flexible models. It describes a modeling process using functions, methods and operators. The result is an algorithmic description of the construction process. Each evaluation of such an algorithm creates a model instance, which depends on its input parameters (width, height, volume, roof angle, orientation, location). These values are normally chosen according to aesthetic aspects and style. In this study, the model's parameters are automatically generated according to an objective function. A generative model can be optimized according to its parameters, in this way, the best solution for a constrained problem is determined. Besides the establishment of an overall framework design, this work consists on the identification of different building shapes and their main parameters, the creation of an algorithmic description for these main shapes and the formulation of the objective function, respecting a building's energy consumption (solar energy, heating and insulation). Additionally, the conception of an optimization pipeline, combining an energy calculation tool with a geometric scripting engine is presented. The methods developed leads to an automated and optimized 3D shape generation for the projected building (based on the desired conditions and according to specific constrains). The approach proposed will help in the construction of real buildings that account for less energy consumption and for a more sustainable world.

  7. Innovators.

    Science.gov (United States)

    NEA Today, 2001

    2001-01-01

    Describes various innovations that have been developed to enhance education. These innovations include: helping educators help at-risk students succeed; promoting high school journalism; ensuring quality online learning experiences; developing a student performing group that uses theater to address social issues; and having students design their…

  8. Cross cutting CFD support to innovative reactor design

    International Nuclear Information System (INIS)

    Roelofs, Ferry

    2009-01-01

    Several innovative technologies are under consideration in the world for nuclear energy production. The considered reactor systems apply either gas, sodium, lead, lead-bismuth, supercritical water, or molten salt as coolant. Therefore, methods shall be developed to determine the viability of such systems, but also to support the design of these innovative reactor systems. Computational Fluid Dynamics (CFD) is becoming more and more integrated in the daily practice of thermal-hydraulics researchers and designers. Therefore, it is very important to develop modelling approaches for the application of CFD to the specific requirements for innovative reactors. As many of these innovative reactor designs under consideration are operated using other coolants than water, one has to be careful in adopting methods which are developed for water as a coolant. Cross-cutting CFD challenges, methods and applications are presented for innovative reactors. (author)

  9. Design and development of Building energy simulation Software for prefabricated cabin type of industrial building (PCES)

    Science.gov (United States)

    Zhang, Jun; Li, Ri Yi

    2018-06-01

    Building energy simulation is an important supporting tool for green building design and building energy consumption assessment, At present, Building energy simulation software can't meet the needs of energy consumption analysis and cabinet level micro environment control design of prefabricated building. thermal physical model of prefabricated building is proposed in this paper, based on the physical model, the energy consumption calculation software of prefabricated cabin building(PCES) is developed. we can achieve building parameter setting, energy consumption simulation and building thermal process and energy consumption analysis by PCES.

  10. Designing an AHP methodology to prioritize critical elements for product innovation: an intellectual capital perspective

    Directory of Open Access Journals (Sweden)

    Costa, R. V.

    2015-08-01

    Full Text Available Intellectual capital has for the past decades been evidenced as an important source of competitive advantages and differentiation at the firm level. At the same time, innovation has become a critical factor for companies to ensure their sustainability and even their survival in a globalized business landscape. Having in mind these two crucial concepts for business success, this study intends to build on the relationships between intellectual capital and product innovation at the firm level. Specifically, we will design and test a model based on the Analytic Hierarchy Process, whose aim is to allow the prioritization of intellectual capital elements according to their relative importance for product innovation performance at the firm level. The main goal of this research is to build a diagnosis and action tool that helps business managers incorporate an intellectual capital perspective into their product innovation initiatives. This framework will help managers to better understand which intellectual capital elements are more critical to their product innovation efforts, and thereby systematize actions and clarify resource allocation priorities to improve their product innovation capabilities. In order to validate the practicability of this proposal, the methodology was empirically applied to a Portuguese innovative company.

  11. The power of design product innovation in sustainable energy technologies

    CERN Document Server

    Reinders, Angele H; Brezet, Han

    2012-01-01

    The Power of Design offers an introduction and a practical guide to product innovation, integrating the key topics that are necessary for the design of sustainable and energy-efficient products using sustainable energy technologies. Product innovation in sustainable energy technologies is an interdisciplinary field. In response to its growing importance and the need for an integrated view on the development of solutions, this text addresses the functional principles of various energy technologies next to the latest design processes and innovation methods. From the perspec

  12. Options Study Documenting the Fast Reactor Fuels Innovative Design Activity

    Energy Technology Data Exchange (ETDEWEB)

    Jon Carmack; Kemal Pasamehmetoglu

    2010-07-01

    This document provides presentation and general analysis of innovative design concepts submitted to the FCRD Advanced Fuels Campaign by nine national laboratory teams as part of the Innovative Transmutation Fuels Concepts Call for Proposals issued on October 15, 2009 (Appendix A). Twenty one whitepapers were received and evaluated by an independent technical review committee.

  13. Methodology and key determinants of building an efficient national innovation system of a country

    Directory of Open Access Journals (Sweden)

    Viktoriia Gurova

    2015-12-01

    Full Text Available The paper represents a research of theoretical principles for determining national innovation systems, as well as analyzes performance results displayed by national innovation systems of the leading countries in the global innovation space, while also describing characteristic features thereof and formulating recommendations for NIS build-up based on the same, implementation of which should serve as the basis of the national innovation system effective performance. It has been determined that at the current stage of global economy development such factors as science, technology and innovation play an important role in formation of a competitive economy. It has been established that the overall funding level with respect to science proves one of the key characteristics of an innovative country, and therefore NIS performance analysis was carried out based on the national expenditure indicator regarding research and development as well as on the country's position in the Global Innovation Index. The analysis carried out showed that the NISs of certain countries were more efficient than those of the others due to peculiarities of the innovative system elements that can be further referred to as determinants of building an effective national innovation system of a country

  14. Building an Integrative Model for Managing Exploratory Innovation

    DEFF Research Database (Denmark)

    Zarmeen, Parisha; Turri, Vanessa Gina; Sanchez, Ron

    2014-01-01

    central problems” organizations face when trying to manage innovation processes (Van de Ven, 1986). We develop an enhanced version of O’Connor’s (2008) Discovery, Incubation and Acceleration (DIA) model by integrating elements of Sanchez’ (2012) theory of architectural isomorphism as well as Markides...

  15. Innovative Danish Building Envelope Components for Passive Houses

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Svendsen, Svend

    2006-01-01

    and in some cases very innovative envelope constructions. In this paper, two of the most interesting components are described; a prefabricated light-weight exterior wall element with a load-bearing plywood and steel frame and a foundation / slab on ground solution based on concrete and EPS insulation...

  16. DESIGNING AN INTEGRATED OPEN INNOVATION SYSTEM: TOWARDS ORGANIZATIONAL WHOLENESS

    DEFF Research Database (Denmark)

    Baka, Vasiliki

    2014-01-01

    sociotechnical arrangement within the paradigm of open innovation. We explore how effectively technological platforms address emergent collaboration and innovation practices within and across organizations and to which extent existing technologies act as strategic catalysts of open innovation. We argue...... that in embracing wholeness and in treating technologies as inseparable constitutive parts of organizational architecture, we foster organizational and institutional collaboration and encourage innovative practices. The focus of the paper is on how the design of sociotechnical systems as wholes, that is systems...... that are concurrently acting as corporate websites, internal collaboration spaces, extranets and social media aggregators, actively promotes open innovation in practice. We close with a presentation of six cases that are illustrative of how such a system could be applicable within the open innovation paradigm, namely...

  17. ECO-INNOVATION IN THE BUILDING INDUSTRY IN POLAND

    Directory of Open Access Journals (Sweden)

    Krzysztof Stanisław Zachura

    2016-12-01

    Furthermore, public investor awareness is increasing in the range of introducing sustained development rules, especially in the utilization of green procurement in the building sector, as evidenced by public facilities constructed in the passive and energy efficient standard.

  18. Maintenance of Traffic for Innovative Geometric Design Work Zones

    Science.gov (United States)

    2015-12-01

    Currently there are no guidelines within the Manual on Uniform Traffic Control Devices (MUTCD) on construction phasing and maintenance of traffic (MOT) for retrofit construction and maintenance projects involving innovative geometric designs. The res...

  19. Approaches to Integrated Building Design Environments

    DEFF Research Database (Denmark)

    Bagger-Petersen, Susanne C; Andersen, Tom

    1996-01-01

    This report discusses functional requirements and specification which needs to be defined and fulfilled to initiate development of an integrated building design environment. The purpose is to outline specifications for further discussion and development. The report documents the first phase...... in an ongoing project at the Technical University of Denmark. The overall project objective is to provide a theoretically well-founded prototype of an integrated IT-system which can serve as a device of feedback from practice and as a test-bed for the developed concept and architecture....

  20. On Hospital Design – Identifying Building Attributes of Hospital Design

    DEFF Research Database (Denmark)

    Holst, Malene Kirstine; Kirkegaard, Poul Henning; Christoffersen, Lars D.

    The present paper surveys the input parameters in hospital design and describes them formally as building attributes in preparation for facilitating planning and designing of hospitals with the aim of a more optimal design process. The overview of the hospital functionalities, bonds, logistics...... and needs is based on an approach of understanding the complexity of the hospital functionalities based on capacities, qualities and times beforehand specific department or units are described. This approach attempts to create an overview of the hospital functionalities respecting capacities, qualities...

  1. Developing Innovative Wall Systems that Improve Hygrothermal Performance of Residential Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Robert Tichy; Chuck Murray

    2006-05-31

    This document serves as the Topical Report documenting work completed by Washington State University (WSU) under U.S. Department of Energy Grant, Developing Innovative Wall Systems that Improve Hygrothermal Performance of Residential Buildings. This project was conducted in collaboration with Oak Ridge National Laboratory (ORNL), and includes the participation of several industry partners including Weyerhaeuser, APA - The Engineered Wood Association, CertainTeed Corporation and Fortifiber. This document summarizes work completed by Washington State University August 2002 through June 2006. WSU's primary experimental role is the design and implementation of a field testing protocol that monitored long term changes in the hygrothermal response of wall systems. During the project period WSU constructed a test facility, developed a matrix of test wall designs, constructed and installed test walls in the test facility, installed instrumentation in the test walls and recorded data from the test wall specimens. Each year reports were published documenting the hygrothermal response of the test wall systems. Public presentation of the results was, and will continue to be, made available to the building industry at large by industry partners and the University.

  2. Innovative Lime Pozzolana Renders for Reconstruction of Historical Buildings

    International Nuclear Information System (INIS)

    Vejmelkova, E.; Maca, P.; Konvalinka, P.; Cerny, R.

    2011-01-01

    Bulk density, matrix density, open porosity, compressive strength, bending strength, water sorptivity, moisture diffusivity, water vapor diffusion coefficient, thermal conductivity, specific heat capacity and thermal diffusivity of two innovative renovation renders on limepozzolana basis are analyzed. The obtained results are compared with reference lime plaster and two commercial renovation renders, and conclusions on the applicability of the particular renders in practical reconstruction works are drawn. (author)

  3. Building a Model of Successful Collaborative Learning for Company Innovativeness

    Directory of Open Access Journals (Sweden)

    Agata Sudolska

    2014-01-01

    Full Text Available The aim of the paper is to develop a model of successful collaborative learning for company innovativeness. First of all, the paper explores the issue of inter-firm learning, focusing its attention on collaborative learning. Secondly, inter-firm learning relationships are considered. Thirdly, the ex ante conditions of collaborative learning and the intra-organizational enhancers of inter-firm learning processes are studied. Finally, a model of the critical success factors for collaborative learning is developed.

  4. The innovative rehabilitation team: an experiment in team building.

    Science.gov (United States)

    Halstead, L S; Rintala, D H; Kanellos, M; Griffin, B; Higgins, L; Rheinecker, S; Whiteside, W; Healy, J E

    1986-06-01

    This article describes an effort by one rehabilitation team to create innovative approaches to team care in a medical rehabilitation hospital. The major arena for implementing change was the weekly patient rounds. We worked to increase patient involvement, developed a rounds coordinator role, used a structured format, and tried to integrate research findings into team decision making. Other innovations included use of a preadmission questionnaire, a discharge check list, and a rounds evaluation questionnaire. The impact of these changes was evaluated using the Group Environment Scale and by analyzing participation in rounds based on verbatim transcripts obtained prior to and 20 months after formation of the Innovative Rehabilitation Team (IRT). The results showed decreased participation by medical personnel during rounds, and increased participation by patients. The rounds coordinator role increased participation rates of staff from all disciplines and the group environment improved within the IRT. These data are compared with similar evaluations made of two other groups, which served as control teams. The problems inherent in making effective, lasting changes in interdisciplinary rehabilitation teams are reviewed, and a plea is made for other teams to explore additional ways to use the collective creativity and resources latent in the team membership.

  5. Handbook of design research methods in education innovations in science, technology, engineering, and mathematics learning and teaching

    CERN Document Server

    Lesh, Richard A; Baek, John Y

    2008-01-01

    This Handbook presents the latest thinking and current examples of design research in education. Design-based research involves introducing innovations into real-world practices (as opposed to constrained laboratory contexts) and examining the impact of those designs on the learning process. Designed prototype applications (e.g., instructional methods, software or materials) and the research findings are then cycled back into the next iteration of the design innovation in order to build evidence of the particular theories being researched, and to positively impact practice and the diffusion of the innovation. The Handbook of Design Research Methods in Education-- the defining book for the field -- fills a need in how to conduct design research by those doing so right now. The chapters represent a broad array of interpretations and examples of how today's design researchers conceptualize this emergent methodology across areas as diverse as educational leadership, diffusion of innovations, complexity theory, an...

  6. Building a competitive regional innovation environment : the regional development platform method as a tool for regional innovation policy

    OpenAIRE

    Harmaakorpi, Vesa

    2004-01-01

    The study focuses on building a regional innovation policy tool that takes into account the demands of the present techno-economic and socio-institutional paradigms. Regions are seen to be strongly dependent on their history. The competitiveness of a region is based on the regional resource configurations. In a turbulent world these resource configurations have to be renewed over time setting demands for regional dynamic capabilities. This study emphasises five regional dynamic capabilities: ...

  7. Innovation in Management of Primary School Construction: Multi-Purpose Primary School Buildings in Bangladesh. Educational Building Report 18.

    Science.gov (United States)

    Constantinos, Fecadu

    This report deals with school building construction utilizing technology carried out by the Lutheran World Service/Rangpur Dinajpur Rehabilitation Service in Bangladesh. The purpose was to develop an alternative design for primary school constructions. The design, construction, and multipurpose use of the school buildings are described. Appended…

  8. Green Buildings in Singapore; Analyzing a Frontrunner’s Sectoral Innovation System

    Directory of Open Access Journals (Sweden)

    Vidushini Siva

    2017-05-01

    Full Text Available The building sector in Singapore consumes up to half of the nation’s total energy. The government has therefore been urging the transformation of the industry by targeting 80% of all buildings to be green-certified by 2030. Thus far, Singapore has done relatively well, and is widely viewed as frontrunner in this respect. This paper addresses the question: what are the benefits and limitations of Singapore’s sectoral innovation system in spurring an energy transition in the building sector, in particular by up-scaling the use of green building technology? The Sectoral Innovation Systems (SIS theoretical framework was used to analyze the Singapore case. Four SIS components were assessed: technological regime, market demand, actor interactions and networks, and institutional framework. The benefits of Singapore’s sectoral innovation system identified in the analysis basically concern aspects of all of the four elements of SIS. Particular success factors concerned the launching of an integrated strategy to support green building innovations (i.e., the Green Mark policy scheme, implementing support policies, and setting up test beds. Furthermore, a masterplan to engage and educate end-users was implemented, knowledge exchange platforms were set up, regulations on the use of efficient equipment in buildings were issued, and standards and a certification system were adopted. The results also shed light on key barriers, namely, the reluctance of building users to change their habits, ineffective stakeholder collaboration, and green buildings innovation support coming from the government only. Measures in place have been moderately effective.

  9. Building America System Research Results. Innovations for High Performance Homes

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-05-01

    This report provides a summary of key lessons learned from the first 10 years of the Building America program and also included a summary of the future challenges that must be met to reach the program’s long term performance goals.

  10. Evidence for climate change relevant to building design in the UK, 1976-2000

    OpenAIRE

    Wright, A. J.

    2002-01-01

    This work led to the author writing a successful Partners in Innovation (PII) bid, with Prof G Levermore, to analyse building design weather statistics under future climates. This was published as CIBSE Technical Memorandum TM34, ‘Weather Data with Climate Change Scenarios (2004)’, Wright AJ & Parkinson JB, available to CIBSE members on the CIBSE website.

  11. Building Blocks Of Innovation Within A State-Owned Enterprise (Part Two

    Directory of Open Access Journals (Sweden)

    Betsie van Zyl

    2005-11-01

    Full Text Available In this article (the second part of a two-part study the focus is on establishing a theoretical framework of state owned enterprise (SOE managers’ espoused theory of building blocks of innovation. A qualitative approach, namely Grounded Theory, supported by Theoretical Sampling, was applied in generating the primary data for the study from different management levels in the SOE. The managers’ espoused theory, based on empirical evidence, shows that innovation consisted of five important building blocks, namely contextual setting; strategic enablers; business enablers; foundational enablers; and human resources; each with its own categories and sub-categories. The study also identified barriers to innovation. An innovation diffusion framework, specifically for implementation in a government context, was proposed.

  12. Design of solar systems in high-rise buildings

    Science.gov (United States)

    Kolosov, Alexander; Chudinov, Dmitry; Yaremenko, Sergey

    2018-03-01

    Nowadays, the renovation program is being implemented in the megapolises of Russia. Innovative high-rise buildings are built instead of morally and physically obsolete houses, where non-traditional renewable energy sources are used to the fullest extent, under the effect of which they are located. The possibility to use solar systems with variation of their design parameters is considered. It is established that solar systems have high technical potential. The share of heat load, that is provided by using solar energy, varies from 4 to 84% depending on the time of the year. Economic indicators restrain the use of such panels. The payback period is about 8 years at the current cost for thermal energy.

  13. SAFETY IN THE DESIGN OF SCIENCE LABORATORIES AND BUILDING CODES.

    Science.gov (United States)

    HOROWITZ, HAROLD

    THE DESIGN OF COLLEGE AND UNIVERSITY BUILDINGS USED FOR SCIENTIFIC RESEARCH AND EDUCATION IS DISCUSSED IN TERMS OF LABORATORY SAFETY AND BUILDING CODES AND REGULATIONS. MAJOR TOPIC AREAS ARE--(1) SAFETY RELATED DESIGN FEATURES OF SCIENCE LABORATORIES, (2) LABORATORY SAFETY AND BUILDING CODES, AND (3) EVIDENCE OF UNSAFE DESIGN. EXAMPLES EMPHASIZE…

  14. Sustainable Building in Scandinavia: Directions of Innovations for Supporting the Transition

    DEFF Research Database (Denmark)

    Koch-Ørvad, Nina; Thuesen, Christian

    2016-01-01

    Buildings are essential for securing a sustainable society, and the Scandinavian building sector is viewed upon globally as the one to lead the way. This paper investigates in which directions sustainable building in Scandinavia is likely to move and outlines a number of areas where sustainable...... in novations are necessary for supporting this movement. The focus on innovations as essential support for the sustainable transition of the building sector derives from the Multi-Level Perspective, which has been applied to this study as a framework for understanding sustainable transitions of socio...

  15. Building inclusive health innovation systems: lessons from India.

    Science.gov (United States)

    Abrol, Dinesh; Sundararaman, T; Madhavan, Harilal; Joseph, K J

    2016-11-03

    This article presents an overview of the changes that are taking place within the public and private health innovation systems in India including delivery of medical care, pharmaceutical products, medical devices, and Indian traditional medicine. The nature of the flaws that exist in the health innovation system is pinpointed. The response by the government, the health, technology and medical institutions, and the evolving industry is addressed on a national level. The article also discusses how the alignment of policies and institutions was developed within the scope of national health innovation systems, and how the government and the industry are dealing with the challenges to integrate health system, industry, and social policy development processes. Resumo: O artigo apresenta um panorama das mudanças atualmente em curso dentro dos sistemas público e privado de inovação em saúde na Índia, incluindo a prestação de serviços médicos, produtos farmacêuticos, dispositivos médicos e medicina tradicional indiana. É destacada a natureza das falhas que existem nos sistemas de inovação em saúde. As respostas do governo, das instituições médicas, de saúde e tecnologia e indústrias envolvidas, são abordadas em nível nacional. O artigo também discute como foi desenvolvido o alinhamento de políticas e instituições no escopo dos sistemas nacionais de inovação em saúde, e como governo e indústria estão lidando com os desafios para integrar o sistema de saúde, a indústria e o desenvolvimento de políticas sociais.

  16. Project-Oriented University – Building the Capability for Innovation

    Directory of Open Access Journals (Sweden)

    Paul DOBRESCU

    2009-01-01

    Full Text Available Global economy is increasingly a knowledge economy, making people’s skills and qualifications more important than traditional power indicators such as territory, geography, natural resources. Globalization imposes new rhythms of performance to every economic or social field. Higher education is no exception to this, since it lies at the interface with the external environment, where skills and qualifications will be used and exploited for economic benefits. Universities are under a two-fold pressure. First, they provide services, knowledge, skills for fast-moving sectors. The knowledge and skills may quickly become obsolete and irrelevant for the economy. Second, universities need to innovate and to adapt to situations of constant change. Both types of pressure force universities to develop their capability for innovation, which becomes a prerequisite for survival. The purpose of this paper is to explain the concept of projectoriented university as a type of university that explicitly uses projects to perform processes of medium to high complexity, thus allowing it to deal with the increasing turbulence and dynamics of its environments. This concept is premised on the idea that there is a connection between a university’s maturity in project management and its managerial competitiveness and innovativeness. The concept inherits the conceptual core of the model of the projectoriented company and it comprises two components. The former is concerned with the structural dimensions of project management, “the hard” component – processes, procedures, organizational structures, terminology. The latter is concerned with the social dimension of project management, the “soft” component – skills, attitudes, competences, project management culture. Empirical results are considered representative for the Romanian higher education system as a whole, with due nuances and exceptions.

  17. Impact of Building Design Parameters on Thermal Energy Flexibility in a Low-Energy Building

    OpenAIRE

    Sarran, Lucile; Foteinaki, Kyriaki; Gianniou, Panagiota; Rode, Carsten

    2017-01-01

    This work focuses on demand-side management potential for the heating grid in residential buildings. The possibility to increase the flexibility provided to the heat network through specific building design is investigated. The role of different parts of the building structure on thermal flexibility is assessed through a parameter variation on a building model. Different building designs are subjected to heat cut-offs, and flexibility is evaluated with respect to comfort preservation and heat...

  18. A design thinking framework for healthcare management and innovation.

    Science.gov (United States)

    Roberts, Jess P; Fisher, Thomas R; Trowbridge, Matthew J; Bent, Christine

    2016-03-01

    The business community has learned the value of design thinking as a way to innovate in addressing people's needs--and health systems could benefit enormously from doing the same. This paper lays out how design thinking applies to healthcare challenges and how systems might utilize this proven and accessible problem-solving process. We show how design thinking can foster new approaches to complex and persistent healthcare problems through human-centered research, collective and diverse teamwork and rapid prototyping. We introduce the core elements of design thinking for a healthcare audience and show how it can supplement current healthcare management, innovation and practice. Copyright © 2015 Elsevier Inc. All rights reserved.

  19. Framing Design to support Social Innovation

    DEFF Research Database (Denmark)

    Morelli, Nicola; Aguilar, Marc; Concilio, Grazia

    2017-01-01

    In the recent years, new forms of organisation have emerged, that have a disruptive power over the existing social and economic system. This phenomenon is challenging the traditional design approach, based on the idea that designers could design services for citizens and public administrations...

  20. Innovation Barriers and Enablers that Affect Productivity in Uganda Building Industry

    Directory of Open Access Journals (Sweden)

    Henry Mwanaki Alinaitwe, , and

    2007-06-01

    Full Text Available The construction industry has of recent been blamed for lack of innovation. Lack of innovation in the industry is believed to be responsible for the decreasing or stagnant levels of productivity in comparison with other industries. This paper reviews the major barriers and enablers to innovation in general. Propositions were made about the factors that affect innovation in the construction industry which were then formulated into a questionnaire. A survey was made on building contractors in Uganda, a developing country, targeting those with financial strength, large in size, and with high capacity to carry out big projects. The identified factors were then ranked and correlated. The level of training in science, engineering and technical education, and the level of research and development at the industry level are looked at as the greatest innovation enablers in building that will drive forward labour productivity. The size of the domestic market and the level of security are the worst innovation barriers that lead to low productivity in the building industry in Uganda. Contractors, policy makers and the government should address the identified factors in order to improve productivity.

  1. Science, Technology and Innovation as Social Goods for Development: Rethinking Research Capacity Building from Sen's Capabilities Approach.

    Science.gov (United States)

    Mormina, Maru

    2018-03-01

    Science and technology are key to economic and social development, yet the capacity for scientific innovation remains globally unequally distributed. Although a priority for development cooperation, building or developing research capacity is often reduced in practice to promoting knowledge transfers, for example through North-South partnerships. Research capacity building/development tends to focus on developing scientists' technical competencies through training, without parallel investments to develop and sustain the socioeconomic and political structures that facilitate knowledge creation. This, the paper argues, significantly contributes to the scientific divide between developed and developing countries more than any skills shortage. Using Charles Taylor's concept of irreducibly social goods, the paper extends Sen's Capabilities Approach beyond its traditional focus on individual entitlements to present a view of scientific knowledge as a social good and the capability to produce it as a social capability. Expanding this capability requires going beyond current fragmented approaches to research capacity building to holistically strengthen the different social, political and economic structures that make up a nation's innovation system. This has implications for the interpretation of human rights instruments beyond their current focus on access to knowledge and for focusing science policy and global research partnerships to design approaches to capacity building/development beyond individual training/skills building.

  2. CFRP solutions for the innovative telescopes design

    Science.gov (United States)

    Rampini, Francesco; Marchiori, Gianpietro

    2006-02-01

    The new frontiers of the research in the astronomic field require the use of more and more advanced high-performance structures. Only an adequate technological innovation of conventional telescopes and radio-telescopes allow to obtain structures able to meet the new specification of the projects. Besides, technological innovation is founded not only on the identification of more and more sophisticated mechanisms and optical instruments, but also on the development of new materials and manufacturing processes for the entire structure that constitute an instrument such as a telescope or a radio-telescope. Among these materials, the use of the carbon fibre is highly important. This material, which is already widely used in the aerospace and automotive fields, shall join also the astronomic field for ground instruments. Thanks to the experience acquired with instruments like ALMA, the industry of composites is now able to guarantee different solutions at relatively low costs that allow the instruments of new generation to move extremely important steps in the development of scientific research. Not just materials, but also processes, through which the materials are worked and manufactured, are extremely important. The use of technologies, such as hand lay-up vacuum bag, compression moulding, table rolling of composite tubes, filament winding, poltrusion and Resin Transfer Moulding (RTM), allow to identify the ideal solution both for big dimension objects, such as backup structure, main mirror structure of quadripod legs, and relatively small objects, such as actuators, adjusters system, etc. The wide choice, concerning the use of composite materials, and their techniques of production, allow the technicians to satisfy the exigencies of astronomers be they addressed to simple control of the weights or of the stiffness of the structures, or to specific thermal behaviour of the piece itself.

  3. Building Units Design and Scale Chemistry

    Science.gov (United States)

    Férey, Gérard

    2000-06-01

    The concept of a building unit (BU) is used in two ways: the first is an a posteriori tool for description of structures which can be used to imagine new topologies originating from the description; the second one, restricted to the routes leading to the solid from the solution, starts from the reality of these building units in the solution to design new solids obtained by the tuned precipitation of these BUs with proper counterions. The room temperature and the hydrothermal routes are examined. The existence of BUs with different sizes with close topologies, revealed by numerous examples, leads us to define the notion of "scale chemistry" which concerns the edification of solids with various BUs, either organic, hybrid, or inorganic, and the consequences it has for the corresponding frameworks and the voids they generate. Not only the framework is important, and applications of the existence of large cavities are discussed. The paper ends with a discussion of the new trends which arise from this topological concept.

  4. Key performance indicators for project success on innovative building technology projects

    CSIR Research Space (South Africa)

    Mphahlele, Cathy

    2015-12-01

    Full Text Available unconventional building methods can only be deemed to satisfy by way of rational design or Agrèment certification”. Delivering projects through IBTs has introduced a construction environment that has different procurement, supply chain management, building...

  5. Thermal analysis and design of passive solar buildings

    CERN Document Server

    Athienitis, AK

    2013-01-01

    Passive solar design techniques are becoming increasingly important in building design. This design reference book takes the building engineer or physicist step-by-step through the thermal analysis and design of passive solar buildings. In particular it emphasises two important topics: the maximum utilization of available solar energy and thermal storage, and the sizing of an appropriate auxiliary heating/cooling system in conjunction with good thermal control.Thermal Analysis and Design of Passive Solar Buildings is an important contribution towards the optimization of buildings as systems th

  6. Tokamak building-design considerations for a large tokamak device

    International Nuclear Information System (INIS)

    Barrett, R.J.; Thomson, S.L.

    1981-01-01

    Design and construction of a satisfactory tokamak building to support FED appears feasible. Further, a pressure vessel building does not appear necessary to meet the plant safety requirements. Some of the building functions will require safety class systems to assure reliable and safe operation. A rectangular tokamak building has been selected for FED preconceptual design which will be part of the confinement system relying on ventilation and other design features to reduce the consequences and probability of radioactivity release

  7. Innovating tree plantation design: spiralographing agroforestry

    OpenAIRE

    Palma, J.H.N.; Crous-Duran, J.; Merouani, H.; Paulo, J.A.; Tomé, M.

    2014-01-01

    Poster Most of forestry or agroforestry artificial plantations either have an orthogonal design, or curvilinear under contour lines to prevent soil erosion. These designs are known to maximize machinery workflow or erosion control respectively. As in many occasions in land use management, what optimizes machinery operation is not what optimizes prevention of soil loss and vice versa. An alternative and intermediate design system such as an Archimedes spiral could offer ...

  8. Action Design Research for Social Innovation: Lessons from Designing a Health and Wellbeing Platform

    NARCIS (Netherlands)

    de Reuver, G.A.; Keijzer-Broers, W.J.W.

    2016-01-01

    IT artifacts play an important role in solving societal problems and realizing social innovations. Existing practice-inspired design science research (DSR) approaches, such as Action Design Research (ADR), do not consider social innovation as an explicit starting point for design iterations. In this

  9. Dynamic integration of residential building design and green energies : the Bireth approach : building integrated renewable energy total harvest approach

    Energy Technology Data Exchange (ETDEWEB)

    Cheung, K.P. [Hong Kong Univ., Hong Kong (China). Dept. of Architecture; Luk, C.L.P. [Chu Hai College of Higher Education, Hong Kong (China). Dept. of Architecture; Wong, S.T. [Hong Kong Univ., Hong Kong (China). Div. of Arts and Humanities, SPACE; Chung, S.L.; Fung, K.S.; Leung, M.F. [Hong Kong Inst. of Vocational Education, Hong Kong (China)

    2006-07-01

    Renewable energy sources that are commonly used in buildings include solar energy, wind energy and rainwater collection. High quality environmentally responsive residential buildings are designed to provide good insulation in winter and solar shading in summer. However, this study demonstrated that the green energy design in residential buildings is not usually well integrated. For example, windows with clear double or triple glazed glass, allow good penetration of sunlight during the day in winter, but are not further dynamically insulated for when the sun goes down to avoid heat loss from the building. Additionally, good solar static shading devices often block much needed daylight on cloudy winter days. These examples emphasize the lack of an integrated approach to gain the best advantage of green energies and to minimize energy costs in residential buildings. This study addressed issues facing the integrated approach with particular reference to the design of a small residential building in rural Beijing. The design included a new approach for interpreting a traditional Beijing court yard house in the modern Beijing rural context, while integrating multi-responding innovative green energy applications derived from first principles. This paper also presented a proposal for a village house in Hong Kong to harvest as much renewable energies as possible, primarily wind energy and solar energy, that come into contact with the building. The purpose was to work towards a renewable energy approach for buildings, namely the Bireth approach, which will benefit practically all houses by making them zero energy houses. The paper described the feasibility of integrating renewable energies in buildings to fulfill performance requirements such improving ventilation, providing warm interiors, drying clothes, or storing solar and wind energies into power batteries. The challenges facing the development of a proposed micro solar hot air turbine were also presented. 15 refs., 6

  10. Design Process for Integrated Concepts with Responsive Building Elements

    DEFF Research Database (Denmark)

    Aa, Van der A.; Heiselberg, Per

    2008-01-01

    An integrated building concept is a prerequisite to come to an energy efficient building with a good and healthy IAQ indoor comfort. A design process that defines the targets and boundary conditions in the very first stage of the design and guarantees them until the building is finished and used...... is needed. The hard question is however: how to make the right choice of the combination of individual measures from building components and building services elements. Within the framework of IEA-ECBCS Annex 44 research has been conducted about the design process for integrated building concepts...

  11. Designing an idea screening framework for employee-driven innovation

    OpenAIRE

    Ciriello, Raffaele Fabio; Richter, Alexander; Schwabe, Gerhard

    2016-01-01

    As ever more companies encourage their employees to realize innovations, a surplus of ideas that exceeds the available resources to implement them has become reality in many organizations. With this paper, we follow recent calls for designing IT-supported, comprehensive, multi-attributive idea screening throughout the whole innovation cycle. Our Idea Screening Framework is grounded in literature and empirical data we collected from a two-year field study in a multinational European banking so...

  12. Librarians and Instructional Designers: Collaboration and Innovation

    Science.gov (United States)

    Eshleman, Joe; Moniz, Richard; Mann, Karen; Eshleman, Kristen

    2016-01-01

    With online education options more ubiquitous and sophisticated than ever, the need for academic librarians to be conversant with digital resources and design thinking has become increasingly important. The way forward is through collaboration with instructional designers, which allows librarians to gain a better understanding of digital resource…

  13. Sustainable Innovation of Glass Design and Craft

    DEFF Research Database (Denmark)

    Sparre-Petersen, Maria

    2014-01-01

    Barely any research has been made into the implementation of sustainable principles in glass design and craft. A common tendency among students and practitioners is to consider it problematic if not impossible to develop a “truly sustainable practice”. Generally glass crafts people and glass...... designers aim to explore new aesthetic possibilities for the material and see sustainability as a hindrance for aesthetic freedom. On the contrary the field of design has strong and growing emphasis on sustainable development. Fry (2009) argues that what he defines as sustain-ability is not an end goal...... but an ongoing process of re-directing the way we design our world and thereby our future. This approach along with further research into sustainable development within the field of design and combined with material specific methodologies may reveal new possibilities for sustainable as well as aesthetic...

  14. Balancing intuition and rationality for improving innovation decision-making : The role of design consultancies

    NARCIS (Netherlands)

    Calabretta, G.; Gemser, G.; Wijnberg, N.M.; Hekkert, P.P.M.

    2013-01-01

    To contain risks and increase the profitability of innovation efforts, firms frequently engage in joint innovation activities with external sources of knowledge, like design consultancies. Innovation literature has given limited consideration to the strategic role that design consultancies can play

  15. Innovations in prestressed concrete pressure vessel design

    International Nuclear Information System (INIS)

    Chow, P.Y.; Ngo, D.; Lin, T.Y.

    1979-01-01

    The study explored a new approach to the design of a high-pressure PCPV that accepts tension and tension cracks in the outer region of the PCPV. It examined the possibility of incorporating artificially-introduced preformed separations that pre-determined crack locations in the design as a method of controlling high tensile stresses generated by internal temperature and pressure. The results showed that the PCPV so designed was, in the extreme case of the DSV, approximately 70% cheaper than the 18 steel vessels of equivalent capacity it replaces. (orig.)

  16. Innovation design : creating value for people, organizations and society

    NARCIS (Netherlands)

    Ouden, den P.H.

    2012-01-01

    Innovation Design presents an approach to designing shared value for businesses, non-profit organizations, end-users and society. The societal and economic challenges we are currently facing - such as the aging population, energy scarcity and environmental issues - are not just threats but are also

  17. Integration of design applications with building models

    DEFF Research Database (Denmark)

    Eastman, C. M.; Jeng, T. S.; Chowdbury, R.

    1997-01-01

    This paper reviews various issues in the integration of applications with a building model... (Truncated.)......This paper reviews various issues in the integration of applications with a building model... (Truncated.)...

  18. Design Buildings Optimally: A Lifecycle Assessment Approach

    KAUST Repository

    Hosny, Ossama; Elhakeem, Ahmed

    2013-01-01

    Cycle Cost (LCC). It consists of three main modules: (1) a custom Building InformationModel (BIM) for desert buildings with a compatibility checker as a central interactive database; (2) a system evaluator module to evaluate the proposed success measures

  19. Achieving informed decision-making for net zero energy buildings design using building performance simulation tools

    NARCIS (Netherlands)

    Attia, S.G.; Gratia, E.; De Herde, A.; Hensen, J.L.M.

    2013-01-01

    Building performance simulation (BPS) is the basis for informed decision-making of Net Zero Energy Buildings (NZEBs) design. This paper aims to investigate the use of building performance simulation tools as a method of informing the design decision of NZEBs. The aim of this study is to evaluate the

  20. A preliminary study on the relevancy of sustainable building design ...

    African Journals Online (AJOL)

    This preliminary study aims to explore the relationship between sustainable building design paradigms and commercial property depreciation, to assist in the understanding of sustainable building design impact towards commercial building value and rental de employs the qualitative method and analyses valuers' current ...

  1. Designing in-building optical fiber networks

    NARCIS (Netherlands)

    Koonen, A.M.J.; Boom, van den H.P.A.; Tangdiongga, E.; Jung, H.D.; Guignard, P.

    2010-01-01

    Optical fiber in-building networks carrying wired and wireless services can outperform CAT-5E networks regarding versatility and installation costs. POF-based point-to-point architectures are optimum for small buildings, and (optically routed) SMF-based bus architectures for larger buildings.

  2. Industrial design as an innovative element in engineering education

    DEFF Research Database (Denmark)

    Schjær-Jacobsen, Hans; Abou-Hayt, Imad; Ashworth, David

    2012-01-01

    This paper describes how the Copenhagen University College of Engineering (IHK), in our continuing effort to innovate the engineering study programs, have introduced strong industrial design elements in the 210 ECTS Bachelor of Mechanical Engineering program as well as the 30 ECTS International...... Design Semester and the 10 ECTS Summer School in International Design and Development. The paper describes how implementation of novel industrial design subject areas requires the creation of new laboratory and workshop facilities in order to combine traditional engineering design disciplines...... with creative design as a driver of innovation. With a practical and problem based learning approach at IHK the students are asked to work closely together with companies to come up with engineering solutions that are sustainable from both an engineering and a design perspective....

  3. Fire safety of historical buildings traditional versus innovative “behavioural design” solutions by using wayfinding systems

    CERN Document Server

    Bernardini, Gabriele

    2017-01-01

    This book applies a behavioral point of view to individuals’ fire safety in historic buildings. It outlines theoretical and operative issues, based on recent studies and international guidelines. Firstly, critical issues for Building Heritage fire safety are widely discussed, by including the modelling of human factor and man-environment-fire interference in these architectural spaces. A significant part of the book includes a discussion on emergency modeling and simulation. A source code for representing the fire evacuation process (including man-evacuation facilities interactions) is offered to the reader. Methods for effectiveness assessment of risk-reducing solutions are provided and tested in a case-study. Being a structured approach to occupants-related problems during a fire in heritage buildings, it offers an innovative methodology and practical examples that researchers and designers can use as a guide when proposing and testing solutions. Evaluation indexes for effectiveness assessment (also usefu...

  4. Effective Risk Management in Innovative Projects: A Case Study of the Construction of Energy-efficient, Sustainable Building of the Laboratory of Intelligent Building in Cracow

    Science.gov (United States)

    Krechowicz, Maria

    2017-10-01

    Many construction projects fail to meet deadlines or they exceed the assumed budget. This scenario is particularly common in the case of innovative projects, in which too late identification of a high risk of delays and exceeding the assumed costs makes a potentially profitable project untenable. A high risk level, far exceeding the level of risk in standard non-innovative projects, is a characteristic feature of the realization phase of innovative projects. This is associated not only with greater complexity of the design and construction phases, but also with the problems with application of new technologies and prototype solutions, lack of qualified personnel with suitable expertise in specialized areas, and with the ability to properly identify the gaps between available and required knowledge and skills. This paper discusses the process of effective risk management in innovative projects on the example of the realization phase of an innovative, energy-efficient and sustainable building of the Laboratory of Intelligent Building in Cracow - DLJM Lab, from the point of view of DORBUD S.A., its general contractor. In this paper, a new approach to risk management process for innovative construction projects is proposed. Risk management process was divided into five stages: gathering information, identification of the important unwanted events, first risk assessment, development and choice of risk reaction strategies, assessment of the residual risk after introducing risk reactions. 18 unwanted events in an innovative construction project were identified. The first risk assessment was carried out using two-parametric risk matrix, in which the probability of unwanted event occurrence and its consequences were analysed. Three levels of risks were defined: tolerable, controlled and uncontrolled. Risk reactions to each defined unwanted event were developed. The following risk reaction types were considered: risk retention, risk reduction, risk transfer and risk

  5. Design, Specification and Construction of Specialized Measurement System in the Experimental Building

    Science.gov (United States)

    Fedorczak-Cisak, Malgorzata; Kwasnowski, Pawel; Furtak, Marcin; Hayduk, Grzegorz

    2017-10-01

    Experimental buildings for “in situ” research are a very important tool for collecting data on energy efficiency of the energy-saving technologies. One of the most advanced building of this type in Poland is the Maloposkie Laboratory of Energy-saving Buildings at Cracow University of Technology. The building itself is used by scientists as a research object and research tool to test energy-saving technologies. It is equipped with a specialized measuring system consisting of approx. 3 000 different sensors distributed in technical installations and structural elements of the building (walls, ceilings, cornices) and the ground. The authors of the paper will present the innovative design and technology of this specialized instrumentation. They will discuss issues arising during the implementation and use of the building.

  6. Building a Mechanism for the Function of an Innovation-Oriented Machine-Building Enterprise in Operating the Development

    Directory of Open Access Journals (Sweden)

    Boiarynova Кateryna О.

    2017-07-01

    Full Text Available The article is aimed at developing and substantiating a mechanism for the function of an innovation-oriented machine-building enterprise in operating the development in order to increase effectuality in the space of ecosystem of operation and to satisfy the economic interests of development. The article proposes a mechanism for the function of an innovation-oriented machine-building enterprise in operating the development, its structure and building based on a business model; operating the development through responsibility centers; functional transformation of economic interest of actors in the ecosystem of function into the economic interest of enterprise; use of economic-institutional regulators and management technologies. Implementation of the mechanism would ensure the value of enterprise, the ability to manage development with the prolonged satisfaction of the joint economic interest, the ability to operate the economic interest of actors in the ecosystem, and maintenance the development mode in the operating process. Prospect for further research will be development of technologies for implementation of the proposed mechanism in the machine-building enterprises.

  7. Political Innovation and Institution-Building: The Experience of Decentralization Experiments.

    Science.gov (United States)

    Yates, Douglas

    The purpose of this paper is to resolve what determines the success or failure of innovations in participatory government; and, more precisely what are the dynamics of institution-building by which the ideas of participation and decentralization are implemented and enduring neighborhood institutions are established. To answer these questions, a…

  8. Building the Capacity to Innovate: The Role of Human Capital--Support Document

    Science.gov (United States)

    Smith, Andrew; Courvisanos, Jerry; Tuck, Jacqueline; McEachern, Steven

    2012-01-01

    This document was produced by the authors based on their research for the report "Building the Capacity to Innovate: The Role of Human Capital," and is an added resource for further information. This document contains the following appendices: (1) Survey methodology; (2) Synopsis of the literature; (3) Interview questions; and (4) Survey…

  9. Innovative Design of Vertical Axis Wind Turbine

    DEFF Research Database (Denmark)

    Chougule, Prasad

    2013-01-01

    , it is well known that the VAWT is advantages over a HAWT in terms of a cost and the simplicity (Paraschivoiu 2002). In this PhD project a simple blade design is incorporated by using the two-element airofoil technology for a three straight-bladed VAWT. The design considerations of a two airfoil are given......, and its aerodynamic characteristics are obtained by an experimental method. A new design is called D2퐴 − 푉퐴푊푇 and a test ring is made to validate the numerical results. A double multiple stream tube method (DMSTM) and blade element method (BEM) are used to determine the numerical performance of a proposed...

  10. Innovative reactor core: potentialities and design

    International Nuclear Information System (INIS)

    Artioli, C.; Petrovich, Carlo; Grasso, Giacomo

    2010-01-01

    Gen IV nuclear reactors are considered a very attractive answer for the demand of energy. Because public acceptance they have to fulfil very clearly the requirement of sustainable development. In this sense a reactor concept, having by itself a rather no significant interaction with the environment both on the front and back end ('adiabatic concept'), is vital. This goal in mind, a new way of designing such a core has to be assumed. The starting point must be the 'zero impact'. Therefore the core will be designed having as basic constraints: a) fed with only natural or depleted Uranium, and b) discharges only fission products. Meantime its potentiality as a net burner of Minor Actinide has to be carefully estimated. This activity, referred to the ELSY reactor, shows how to design such an 'adiabatic' core and states its reasonable capability of burning MA legacy in the order of 25-50 kg/GW e y. (authors)

  11. Method for simulating predictive control of building systems operation in the early stages of building design

    DEFF Research Database (Denmark)

    Petersen, Steffen; Svendsen, Svend

    2011-01-01

    A method for simulating predictive control of building systems operation in the early stages of building design is presented. The method uses building simulation based on weather forecasts to predict whether there is a future heating or cooling requirement. This information enables the thermal...... control systems of the building to respond proactively to keep the operational temperature within the thermal comfort range with the minimum use of energy. The method is implemented in an existing building simulation tool designed to inform decisions in the early stages of building design through...... parametric analysis. This enables building designers to predict the performance of the method and include it as a part of the solution space. The method furthermore facilitates the task of configuring appropriate building systems control schemes in the tool, and it eliminates time consuming manual...

  12. Wall envelopes in office buildings: design trend and implications on cooling load of buildings

    International Nuclear Information System (INIS)

    Ibrahim, N.; Ahmed, A.Z.; Ahmed, S.S.

    2006-01-01

    The wall envelope is a vital element of a building especially to a high rise building where its wall to building volume ratio is higher compared to other building forms. As well as a means of architectural expression, the wall envelope protects and regulates the indoor environment. In recent years there have been many applications of glass products and cladding systems in high-rise buildings built in Kuala Lumpur. This paper describes a recent research and survey on wall envelope designs adopted in 33 high-rise office buildings built in the central business district of Kuala Lumpur since 1990. This research adopts component design analysis to identify dominant trends on wall envelope design for the surveyed buildings. The paper seeks to discourse the implications of this design trend on energy consumption of high-rise office buildings in the country

  13. Sustainable Innovation of Glass Design and Craft

    DEFF Research Database (Denmark)

    Sparre-Petersen, Maria

    2014-01-01

    but an ongoing process of re-directing the way we design our world and thereby our future. This approach along with further research into sustainable development within the field of design and combined with material specific methodologies may reveal new possibilities for sustainable as well as aesthetic...... windows to beads. Glass is a natural material and can be found in nature in the form of i.e. obsidian and fulgurites. Glass in itself does not impact the environment negatively, but mining and transportation of raw materials and production of new glass products contributes to CO2 emission. Therefore...

  14. Innovations in Los Alamos alpha box design

    International Nuclear Information System (INIS)

    Ledbetter, J.M.; Dowler, K.E.; Cook, J.H.

    1985-01-01

    Destructive examinations of irradiated fuel pins containing plutonium fuel must be performed in shielded hot cells with strict provisions for containing the plutonium. Alpha boxes provide containment for the plutonium, toxic fission products, and other hazardous highly radioactive materials. The alpha box contains windows for viewing and a variety of transfer systems specially designed to allow transfers in and out of the alpha box without spread of the hazardous materials that are contained in the box. Alpha boxes have been in use in the Wing 9 hot cells at Los Alamos National Laboratory for more than 20 years. Features of the newly designed alpha boxes are presented

  15. Application of Sensitivity Analysis in Design of Sustainable Buildings

    DEFF Research Database (Denmark)

    Heiselberg, Per; Brohus, Henrik; Rasmussen, Henrik

    2009-01-01

    satisfies the design objectives and criteria. In the design of sustainable buildings, it is beneficial to identify the most important design parameters in order to more efficiently develop alternative design solutions or reach optimized design solutions. Sensitivity analyses make it possible to identify...... possible to influence the most important design parameters. A methodology of sensitivity analysis is presented and an application example is given for design of an office building in Denmark....

  16. Convertible security design and contract innovation

    NARCIS (Netherlands)

    Lewis, C.M.; Verwijmeren, P.

    2011-01-01

    This paper studies convertible security design for a sample of 814 issuers over the years 2000 through 2007. Using a nested logit model, we examine how firms choose fixed income claims and the method of payment. We find that fixed income claims are chosen to reduce corporate income taxes, minimize

  17. Urban Innovation through Co-Design Scenarios

    DEFF Research Database (Denmark)

    Lissandrello, Enza; Morelli, Nicola; Schillaci, Domenico

    2018-01-01

    -2020), that addresses the issue of behavioral change towards (more) sustainable mobility lifestyle in EU cities. The paper frames the MUV method through the combination of theories on collaborative urban planning and participatory design with a background rooted on governance of public participation, as the interplay...

  18. INNOVATIVE DATABASE MANAGEMENT SYSTEM OF DESIGN WORKS

    Directory of Open Access Journals (Sweden)

    Albina Ahmetova

    2012-01-01

    Full Text Available The article discusses the definition of a professional thinking in design, on which the formation, the embodiment of the project and implementation of the ideas of the customer is based. The article is proposed to teach students the proper approach to the appearance and presentation of the professional and educational works.

  19. Eco-innovation: The opportunities for engineering design research

    DEFF Research Database (Denmark)

    O'Hare, Jamie Alexander; McAloone, Tim C.

    2014-01-01

    Eco-innovation is an approach that has the potential to deliver step change improvements in the environmental performance of products, but the uptake by industry to date has been disappointing. The paper presents a selective review of the academic literature, choosing examples of research that gi...... a flavour of the key trends and interesting topics that are emerging from the eco-innovation body of knowledge. We conclude by suggesting 10 areas where we see potential for the engineering design research community to contribute to the advancement of eco-innovation.......Eco-innovation is an approach that has the potential to deliver step change improvements in the environmental performance of products, but the uptake by industry to date has been disappointing. The paper presents a selective review of the academic literature, choosing examples of research that give...

  20. Heat and mass transfer in building services design

    CERN Document Server

    Moss, Keith

    1998-01-01

    Building design is increasingly geared towards low energy consumption. Understanding the fundamentals of heat transfer and the behaviour of air and water movements is more important than ever before. Heat and Mass Transfer in Building Services Design provides an essential underpinning knowledge for the technology subjects of space heating, water services, ventilation and air conditioning. This new text: *provides core understanding of heat transfer and fluid flow from a building services perspective *complements a range of courses in building services engineering *

  1. AIDSCAP initiative. Innovation in NGO capacity building: Tanzania AIDS project.

    Science.gov (United States)

    Dadian, M J

    1998-01-01

    Tanzania has since the mid-1980s experienced some of the highest rates of HIV infection in the world, with data now showing the mean levels of HIV seroprevalence nationwide to be greater than 13%, and even higher than 30% in some districts. By 2000, as many as 2.4 million Tanzanians will be infected with HIV and more than 850,000 Tanzanian children will be orphaned by the epidemic. The Tanzania AIDS Project (TAP), funded by the US Agency for International Development (USAID), was implemented through the AIDS Control and Prevention (AIDSCAP) Project by Family Health International (FHI) during 1993-97. TAP will receive support throughout 1998 through a cooperative agreement between USAID and FHI. Nongovernmental organization (NGO) representatives meet on a regular basis in Dar es Salaam and in 8 other regions of the country to plan and coordinate the major aspects of TAP's HIV/AIDS prevention activities in each area. The author describes the evolution of the idea to bring NGOs together into geographic clusters, the diversity of talents enjoyed from using the cluster concept, building institutional capacity, the challenges facing TAP's 9 clusters, and working with traditional communities.

  2. Creating a Culture of Patient Safety through Innovative Hospital Design

    National Research Council Canada - National Science Library

    Reiling, John G

    2005-01-01

    When SynergyHealth, St. Joseph's Hospital of West Bend, Wisconsin, decided to relocate and build an 82-bed acute care facility, they recognized the opportunity to design a hospital that focused on patient safety...

  3. Building Successful Multicultural Special Education Programs through Innovative Leadership

    Science.gov (United States)

    Obiakor, Festus E.; Beachum, Floyd D.; Williams, Darrell; McCray, Carlos R.

    2006-01-01

    With increased debates over various aspects of special education, it has become apparent that multicultural leadership is needed to prepare school administrators and teachers to design effective special education programs. In this article, the authors discuss several aspects of administering successful programs for multicultural students. To be…

  4. Building a NGII : Balancing between infrastructure and innovation

    NARCIS (Netherlands)

    Koerten, H.; Veenswijk, M.

    2009-01-01

    A multitude of studies has been published on how National Geo Information Infrastructures (NGII), also known as Spatial Data Infrastructures (SDI), should be designed, set up and monitored. Scientific research on day-to-day experiences, on what is really happening in NGIIprojects is hard to find. We

  5. Combination microwave ovens: an innovative design strategy.

    Science.gov (United States)

    Tinga, Wayne R; Eke, Ken

    2012-01-01

    Reducing the sensitivity of microwave oven heating and cooking performance to load volume, load placement and load properties has been a long-standing challenge for microwave and microwave-convection oven designers. Conventional design problem and solution methods are reviewed to provide greater insight into the challenge and optimum operation of a microwave oven after which a new strategy is introduced. In this methodology, a special load isolating and energy modulating device called a transducer-exciter is used containing an iris, a launch box, a phase, amplitude and frequency modulator and a coupling plate designed to provide spatially distributed coupling to the oven. This system, when applied to a combined microwave-convection oven, gives astounding performance improvements to all kinds of baked and roasted foods including sensitive items such as cakes and pastries, with the only compromise being a reasonable reduction in the maximum available microwave power. Large and small metal utensils can be used in the oven with minimal or no performance penalty on energy uniformity and cooking results. Cooking times are greatly reduced from those in conventional ovens while maintaining excellent cooking performance.

  6. Building America Top Innovations 2013 Profile – Quality Management System Guidelines

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    This Top Innovation profile describes quality management system tools that were customized for residential construction by BSC, IBACOS, and PHI, for use by builders, trades, and designers to help eliminate mistakes that would require high-cost rework.

  7. Climate-specific design of tropical housing and buildings (Garissa ...

    African Journals Online (AJOL)

    design stages to make better use of passive solar energy in urban planning and building design for better indoor ... Keywords:Climatic design, Solar energy, Passive architecture, Thermal comfort, Human comfort, ARCHIPAK, Garissa, Kenya.

  8. Government regulation as an impetus for innovation: Evidence from energy performance regulation in the Dutch residential building sector

    International Nuclear Information System (INIS)

    Beerepoot, Milou; Beerepoot, Niels

    2007-01-01

    The recent implementation of energy performance policy as a way to tackle energy consumption in the building sector in Europe draws attention to the effect it has on the development and diffusion of energy-saving innovations. According to innovation system literature, government regulation through norms and standards is one of the factors stimulating innovation. This paper concentrates on the role of stricter government regulation as an incentive to innovation in the Dutch residential building sector. Innovation in this sector is predominantly a process of applying incremental modifications to comply with new and stricter government regulations and standards. Energy performance policy in its current shape will therefore not contribute to the diffusion of really new innovation in energy techniques for residential buildings in the Netherlands. If diffusion of really new innovation is an explicit aim of energy performance policy then the European wide introduction of this scheme needs reconsideration

  9. Investigation of innovative steel runway beam in industrial building

    Indian Academy of Sciences (India)

    The design of a runway beam for overhead cranes is of great importance ... The weight of the crane bridge and wheel spacing for the specific crane .... Name of model h (mm) b (mm) t (mm) s (mm) L (mm). Simple. 500. 300. 12. 6 ... load is 10.59 kN, crane runway beam span is 6,160 mm, and crane wheel base is 1,200 mm.

  10. Sustainable Innovation of Glass Design and Craft

    DEFF Research Database (Denmark)

    Sparre-Petersen, Maria

    2014-01-01

    , reduction of production and transportation of new glass is desirable (Environmental Protection Agency, 2012), and can be realized by recycling glass, that has already been manufactured, used and collected for recycling, but has ended up in landfills due to the market mechanisms that allow manufacturing...... and deposition of glass is reduced Today glass production predominantly consists of window glass, glass wool for insulation and containers such as bottles and jelly jars. Glass craft and design hold only a fraction of the market. Still there is reason to believe that generation and implementation of new...

  11. Southern Regional Center for Lightweight Innovative Design

    Energy Technology Data Exchange (ETDEWEB)

    Horstemeyer, Mark F. [Mississippi State Univ., Mississippi State, MS (United States); Wang, Paul [Mississippi State Univ., Mississippi State, MS (United States)

    2011-12-27

    The three major objectives of this Phase III project are: To develop experimentally validated cradle-to-grave modeling and simulation tools to optimize automotive and truck components for lightweighting materials (aluminum, steel, and Mg alloys and polymer-based composites) with consideration of uncertainty to decrease weight and cost, yet increase the performance and safety in impact scenarios; To develop multiscale computational models that quantify microstructure-property relations by evaluating various length scales, from the atomic through component levels, for each step of the manufacturing process for vehicles; and To develop an integrated K-12 educational program to educate students on lightweighting designs and impact scenarios.

  12. Design Driven Innovation Practices in Design-preneur led Creative Industry

    Directory of Open Access Journals (Sweden)

    Philips Kembaren

    2014-09-01

    Full Text Available Design driven innovation has emerged to be an alternative way to generate sustainable competitive products or services. Previous research has recently revealed succesful practices of design driven innovation in various industries. However, little has been known about the creative companies that practice design driven innovation, especially in developing countries. This research investigates the existence and practices of design-driven innovation in the Indonesian creative industry. Based on interviews with the design-preneurs of the creative industry, one of the results of this study reveals how the Indonesian creative industry creates new meanings that are embedded into new products. Based on the identification, a framework to create new meaningsis resulted which consists of a set of key processes, such as sensing, sensemaking, specifying, setting up and storytelling. The practical contribution of this research is that this identified framework can be adopted by any creative companies interested in improving their innovation capability.

  13. Innovative Offshore Wind Plant Design Study

    Energy Technology Data Exchange (ETDEWEB)

    Hurley, William L. [Glosten Associates, Inc., Seattle, WA (United States); Nordstrom, Charles J. [Glosten Associates, Inc., Seattle, WA (United States); Morrison, Brent J. [Glosten Associates, Inc., Seattle, WA (United States)

    2013-12-18

    Technological advancements in the Glosten PelaStar floating wind turbine system have led to projected cost of energy (COE) reductions from today’s best-in-class offshore wind systems. The PelaStar system is projected to deliver a COE that is 35% lower than that delivered by the current offshore wind plants. Several technology developments have been achieved that directly target significant cost of energy reductions. These include: Application of state-of-the-art steel construction materials and methods, including fatigue-resistant welding techniques and technologies, to reduce hull steel weight; Advancements in synthetic fiber tendon design for the mooring system, which are made possible by laboratory analysis of full-scale sub-rope specimens; Investigations into selected anchor technologies to improve anchor installation methods; Refinement of the installation method, specifically through development of the PelaStar Support Barge design. Together, these technology developments drive down the capital cost and operating cost of offshore wind plants and enable access to superb wind resources in deep water locations. These technology developments also reduce the uncertainty of the PelaStar system costs, which increases confidence in the projected COE reductions.

  14. Analysis 6. Component requirements, competition and export. A survey of innovation related to building components; Analyse 6. Komponentkrav, konkurrence og eksport. En kortlaegning af innovation i byggekomponenter

    Energy Technology Data Exchange (ETDEWEB)

    Svendsen, Svend

    2011-02-15

    The report collates several sub-analyses about feasible developments in relation to improved energy requirements for the most important building parts, components and installations for low-energy buildings. The aim is to achieve 75% reduction of energy consumption in the future building class 2020. The findings will contribute to the plans of introducing new building component requirements to force Danish manufacturers to use innovative solutions and to force manufacturers from other countries to market the best products only. (LN)

  15. Building Process Organisation Model fit for Innovative Housing Concepts? Case Study of the Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Kondratenko, I.; Jablonska, B. [ECN , Petten (Netherlands)

    2009-11-15

    There is growing justification and political commitment in Europe to tackle energy efficiency in new and existing buildings, both residential and non-residential. It requires shifting the construction sector towards large scale successful implementation of innovative energy efficient and sustainable building concepts. Nowadays, a number of innovative building concepts exist, to name a few: Very Low Energy, Passive House, Zero-Energy, Zero-Emission, Energy Producing, etc. However, the experience in the Netherlands has shown inflexibility in the behaviour within the traditional building process to allow the necessary changes for large scale introduction of innovative integral building concepts. This has led to examining the question: 'How well does the building process organisation model in the Netherlands allow the implementation of innovative housing building concepts?' Answering this question requires specific knowledge of the behaviour of the traditional building process, its characteristics, advantages and disadvantages, phases and actors involved. It also demanded to focus on the nature of barriers within, and on possibilities to overcome identified bottlenecks. Also, examined was the suitability of several selected novel concepts in their opportunities for adapting the building process organisation model and the behaviour of actors within, such as: The Life Cycle Analysis, (including the Whole Building Life Cycle Costing and the Least Life Cycle Costing), The Cradle to Cradle (C2C) Concept, The Living Building Concept and Private Initiatives. This also included recent experiences with building projects implementing these concepts in the Netherlands. In summary, there are a number of challenges. The traditional building process in the Netherlands is fragmented in nature into successive phases with a strict way of cooperation and division of tasks and responsibilities between actors. There is also a cost / risk approach preventing enabling long

  16. A Facilities Manager's Guide to Green Building Design.

    Science.gov (United States)

    Simpson, Walter

    2001-01-01

    Explains how the "green building" approach to educational facilities design creates healthy, naturally lit, attractive buildings with lower operating and life cycle costs. Tips on getting started on a green design and overcoming the barriers to the green design concept are discussed. (GR)

  17. Design/build: A Relevant Pedagogy for Architecture Education

    Directory of Open Access Journals (Sweden)

    Olivier Chamel

    2016-12-01

    This paper will present a series of recent furniture design/build exercises where students designed and furniture and small building prototypes with limited reliance on drawings. We will discuss how subjects such as structures, material sourcing and construction detailing can be transposed from various courses and applied to design/build projects. We believe that a pedagogy based on physical experimentations could infuse energy throughout curricula no matter the course subject.

  18. Using Design-Based Research in Higher Education Innovation

    Science.gov (United States)

    Ford, Cristi; McNally, Darragh; Ford, Kate

    2017-01-01

    This paper discusses the design-based research approach used by the Center for Innovation in Learning and Student Success (CILSS) at the University of Maryland, University College (UMUC). CILSS is a laboratory for conducting applied research that focuses on continuous improvements to the university's instruction of curriculum, learning models, and…

  19. Innovative Mobile Platform Developments for Electronic Services Design and Delivery

    DEFF Research Database (Denmark)

    Scupola, Ada

    In the ever-growing world of technology, it is becoming more important to understand the developments of new electronic services and mobile applications. Innovative Mobile Platform Developments for Electronic Services Design, and Delivery is a comprehensive look at all aspects of production manag...

  20. Building performance simulation as a design tool for refurbishment of buildings

    NARCIS (Netherlands)

    Hensen, J.L.M.; Bartak, M.; Drkal, F.; Dunovska, T.; Lain, M.; Matuska, T.; Schwarzer, J.; Sourek, B.; Bednar, T.

    2004-01-01

    This paper attempts to outline the current state-of-the-art regarding the use of building performance simulation as a design tool for refurbishment of buildings. This is illus-trated by means of three recent studies for conversion of historical buildings (an early 20th century factory, and a water

  1. Impact of Building Design Parameters on Thermal Energy Flexibility in a Low-Energy Building

    DEFF Research Database (Denmark)

    Sarran, Lucile; Foteinaki, Kyriaki; Gianniou, Panagiota

    This work focuses on demand-side management potential for the heating grid in residential buildings. The possibility to increase the flexibility provided to the heat network through specific building design is investigated. The role of different parts of the building structure on thermal flexibil...

  2. Resilient design in the conservation of Johar market heritage building

    Science.gov (United States)

    Roesmanto, Totok

    2017-12-01

    Johar Market building based on Law of Repubic of Indonesia No.11 of 2010 is a heritage building. It was built in 1936 located near traditional square of Pasebaan and Aloon- Aloon was built by Dutch merchants union in 1678. Semarang based on decentralized policy by the Dutch Government in 1906 became a trading city. Rapid development of trading activities has caused the city planning policy by Semarang Government since 1970 made Aloon-Aloon become market buildings. Johar Market and market buildings in surrounding were on fire in 2015. Basing on Law No.11 of 2010 Semarang Government plans to conserve Johar Market heritage building and reconstruct Aloon-Aloon based on proposal of Roesmanto in 2016. The architect bureau assigned by the Semarang Government designed a new building in the middle of South-Johar Market to accommodate Johar merchants. This study aims to evaluate the design of new building by the architect bureau considering that since 2012 the city of Semarang including earthquake prone areas. The revitalization of Johar Market should use resilient design in order to prevent future damages to heritage buildings located nearby and new building must be spaced sufficiently against surrounding heritage buildings. This research uses descriptive qualitative method base on the field data after Johar Market burned and design planned bureau architect. The results of this study found that the distance between new building and heritage building is less wide.

  3. Integral Building Design workshops : a concept to structure communication

    NARCIS (Netherlands)

    Savanovic, P.; Zeiler, W.; Tzou, H.S.; Jalili, N.

    2007-01-01

    Following the developments in (Dutch) building practice, where besides specialist skills a design approach is increasingly being asked, the Building Services chair of the Faculty of Architecture, Building and Planning of Technische Universiteit Eindhoven (TU/e) initiated in academic year 2005/06 a

  4. Design Management Capability and Product Innovation in SMEs

    OpenAIRE

    Fernández-Mesa, Ana Isabel; ALEGRE VIDAL, JOAQUIN; CHIVA GOMEZ, RICARDO; Gutiérrez Gracia, Antonio

    2013-01-01

    [EN] Purpose The aim of this paper is to present design management as a dynamic capability and to analyze its mediating role between organizational learning capability and product innovation performance in small and medium enterprises (SMEs). Design/methodology/approach Structural equation modeling is used to test the research hypotheses based on data from the Italian and Spanish ceramic tile industries. The data are derived from the responses of 182 companies (50 percent of the targ...

  5. Evaluation on Innovation approaches on Performance from Malaysian perspective: A study on Malaysian Building energy saving

    Directory of Open Access Journals (Sweden)

    Amlus M. H.

    2018-01-01

    Full Text Available Lately Malaysia energy consumption versus generation rapidly shows increasing due to increasing of load. This phenomenon happened following to advanced country development. Lacking on design and without energy management approach the energy consumption and monthly electrical bill will steadily increased and support the increasing of world carbon emission. Therefore the aim of this work is to approach the simplest innovation task-energy audit , which is load-apportioning strategy. This approach using matching the usage of equipment with fully utilized space and reschedules the time of usage. A one week data was collected by logged power meter at main switchboard at selected building using Fluke Power Recorder. From the data collected, current usage of every load can be determine, then load will be arrange into a group with same portion and same time of usage. The result shows clearly the energy consumption for every single day and indicates the highest and lowest peak. From this work the apportioning strategy implemented by rearrange the load following type of room application. After the arrangement, new measurement was taken and a very good result was established. This work also can be further apply for a huge load that can be save a lot of money for owner especially government by energy saving.

  6. Development of Innovative Heating and Cooling Systems Using Renewable Energy Sources for Non-Residential Buildings

    Directory of Open Access Journals (Sweden)

    Cinzia Buratti

    2013-10-01

    Full Text Available Industrial and commercial areas are synonymous with high energy consumption, both for heating/cooling and electric power requirements, which are in general associated to a massive use of fossil fuels producing consequent greenhouse gas emissions. Two pilot systems, co-funded by the Italian Ministry for the Environment, have been created to upgrade the heating/cooling systems of two existing buildings on the largest industrial estate in Umbria, Italy. The upgrade was specifically designed to improve the system efficiency and to cover the overall energy which needs with renewable energy resources. In both cases a solar photovoltaic plant provides the required electric power. The first system features a geothermal heat pump with an innovative layout: a heat-storage water tank, buried just below ground level, allows a significant reduction of the geothermal unit size, hence requiring fewer and/or shorter boreholes (up to 60%–70%. In the other system a biomass boiler is coupled with an absorption chiller machine, controlling the indoor air temperature in both summer and winter. In this case, lower electricity consumption, if compared to an electric compression chiller, is obtained. The first results of the monitoring of summer cooling are presented and an evaluation of the performance of the two pilot systems is given.

  7. 78 FR 46546 - Design-Build Contracting

    Science.gov (United States)

    2013-08-01

    ... address from 9 a.m. to 5 p.m., e.t., Monday through Friday, except Federal holidays. Those desiring... could evaluate ATC-based proposals from firms desiring to submit innovative concepts. The underlying... the LaDOTD to consider a broader spectrum of technical solutions for the Project. Overall, we feel...

  8. Optimizing aspects of pedestrian traffic in building designs

    KAUST Repository

    Rodriguez, Samuel

    2013-11-01

    In this work, we investigate aspects of building design that can be optimized. Architectural features that we explore include pillar placement in simple corridors, doorway placement in buildings, and agent placement for information dispersement in an evacuation. The metrics utilized are tuned to the specific scenarios we study, which include continuous flow pedestrian movement and building evacuation. We use Multidimensional Direct Search (MDS) optimization with an extreme barrier criteria to find optimal placements while enforcing building constraints. © 2013 IEEE.

  9. Optimizing aspects of pedestrian traffic in building designs

    KAUST Repository

    Rodriguez, Samuel; Yinghua Zhang,; Gans, Nicholas; Amato, Nancy M.

    2013-01-01

    In this work, we investigate aspects of building design that can be optimized. Architectural features that we explore include pillar placement in simple corridors, doorway placement in buildings, and agent placement for information dispersement in an evacuation. The metrics utilized are tuned to the specific scenarios we study, which include continuous flow pedestrian movement and building evacuation. We use Multidimensional Direct Search (MDS) optimization with an extreme barrier criteria to find optimal placements while enforcing building constraints. © 2013 IEEE.

  10. Designing a Web-Based Asynchronous Innovation/Entrepreneurism Course

    Science.gov (United States)

    Ghandforoush, Parviz

    2017-01-01

    Teaching an online fully asynchronous information technology course that requires students to ideate, build an e-commerce website, and develop an effective business plan involves a well-developed and highly engaging course design. This paper describes the design, development, and implementation of such a course and presents information on…

  11. Innovation Design Creating Value for People, Organizations and Society

    CERN Document Server

    den Ouden, Elke

    2012-01-01

    Innovation Design presents an approach to designing shared value for businesses, non-profit organizations, end-users and society. The societal and economic challenges we are currently facing – such as the aging population, energy scarcity and environmental issues – are not just threats but are also great opportunities for organizations. Innovation Design shows how organizations can contribute to the process of generating value for society by finding true solutions to these challenges. And at the same time it describes how they can capture value for themselves in business ecosystems that care for both people and planet. This book covers: ·         Creating meaningful innovations that improve quality of life, engage users and provide value for organizations and other stakeholders; ·         Guiding the creation of shared value throughout the innovation process, with a practical and integrative approach towards value that connects ideas from economics, psychology, sociology and ecology; ·�...

  12. Virtual Reality as Innovative Approach to the Interior Designing

    Science.gov (United States)

    Kaleja, Pavol; Kozlovská, Mária

    2017-06-01

    We can observe significant potential of information and communication technologies (ICT) in interior designing field, by development of software and hardware virtual reality tools. Using ICT tools offer realistic perception of proposal in its initial idea (the study). A group of real-time visualization, supported by hardware tools like Oculus Rift HTC Vive, provides free walkthrough and movement in virtual interior with the possibility of virtual designing. By improving of ICT software tools for designing in virtual reality we can achieve still more realistic virtual environment. The contribution presented proposal of an innovative approach of interior designing in virtual reality, using the latest software and hardware ICT virtual reality technologies

  13. Innovative Design of Cam-Controlled Planetary Gear Trains

    Directory of Open Access Journals (Sweden)

    Wen-Hsiang Hsieh

    2011-10-01

    Full Text Available The objective of this paper is to perform the innovation design for the new structures of cam-controlled planetary gear trains (CCPGTs, based on the creative mechanism design methodology. Firstly, the design requirements and design constraints are summarized according to the kinematics characteristics of existing CCPGTs. Then, the (4, 5 and (5, 7 graphs are generated by the theory of number synthesis. After that, the atlas of feasible specialized graphs is obtained. Finally, the atlas of new designs is obtained through the particularization process. In addition, an illustrated example is given, and the feasibility of the design is verified by computer simulation using ADAMS software. The result indicates that new design can produce a more wide range of non-uniform motion than the existing design. Therefore, they are better alternatives for driving a variable speed input mechanism.

  14. EU Support for Innovation and Market Uptake in Smart Buildings under the Horizon 2020 Framework Programme

    Directory of Open Access Journals (Sweden)

    Philippe Moseley

    2017-11-01

    Full Text Available At the end of November 2016, the European Commission tabled the Clean Energy for All Europeans package, which represents a large set of proposals for several key directives related to energy. The package included proposed revisions to the Energy Performance of Buildings Directive (EPBD which seek to update and streamline the Directive in several areas, including provisions to ensure buildings operate efficiently by encouraging the uptake of Information and Communication Technologies (ICT and smart technologies. Although it can be argued that there is at present no commonly accepted definition of a “smart building”, the Commission’s proposed revision refers to three key features of a possible indicator of “smartness” in buildings: the technological readiness of a building to (1 interact with its occupants; (2 to interact with the grid; and (3 to manage itself efficiently. Using these three pillars of “smartness” as a methodological starting point, this paper identifies and analyses recent and ongoing Horizon 2020 research, innovation and market uptake projects which are investigating “smart buildings”. The research maps and examines the tasks, scope and innovations in areas that include building automation and control systems, demand response, energy management, ICT and user interfaces for energy efficiency.

  15. Innovative features and fuel design approach in the iris reactor

    International Nuclear Information System (INIS)

    Petrovic, B.; Carelli, M.; Greenspan, E.; Matsumoto, H.; Padovani, E.; Ganda, F.

    2002-01-01

    The International Reactor Innovative and Secure (IRIS) is being developed by an international consortium of industry, laboratory, university and utility establishments, led by Westinghouse. The IRIS design addresses key requirements associated with advanced reactors, including improved safety, enhanced proliferation resistance, competitive electricity production cost, and improved waste management. IRIS is a modular, small/medium size (335 MWe) PWR with an integral vessel configuration. The objective has been to base its design on proven LWR technology, so that no new technology development is needed and near-term deployment is possible, yet at the same time to introduce innovative features making it attractive when compared to present PWRs. These opposing requirements resulted in an evolutionary approach to fuel and core design, balancing new features against the need to avoid extensive testing and demonstration programmes. (author)

  16. Integration of the security systems in the architectural design of nuclear and important buildings in Egypt

    International Nuclear Information System (INIS)

    Algohary, S.

    2007-01-01

    The new and emerging threats to buildings and infrastructure which are faced by todays engineering design and facility management community in Egypt demand new approaches and solutions that are innovative and increasingly based on risk management principles. In the wake of the damage of Taba hotel in south Sinai (2004) and Sharm El-Sheik hotels in Egypt (July, 2005), there was a growing awareness of public vulnerability to terrorist attacks. This awareness leads to increase the expectations form and responsibilities of the architects, engineers and construction professionals This study reviews and assesses different types of threats to nuclear and important buildings. It identifies also the architectural design, vulnerability and risk management that can enhance security. It also introduces a new approach for integration of architectural design and security in nuclear and important buildings in Egypt. The results shows that escalating threats and risks to important buildings and infrastructures change the role of planners, architects, engineers and builders by increasing the focus on the importance of applying viable security principles to the building designs. Architects in Egypt can assume an important role in improving the life-safety features of important buildings by increasing and integrating new security principles and approaches to improve the security and performance of the buildings against man made disasters

  17. Procedural Design of Exterior Lighting for Buildings with Complex Constraints

    KAUST Repository

    Schwarz, Michael; Wonka, Peter

    2014-01-01

    We present a system for the lighting design of procedurally modeled buildings. The design is procedurally specified as part of the ordinary modeling workflow by defining goals for the illumination that should be attained and locations where

  18. Advanced Energy Efficiency Design Strategies In Retail Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Hayter, S.; Torcellini, P.

    2000-08-17

    This paper presents two US retail building projects that were designed and constructed using the energy design process. These buildings, the BigHorn Center in Silverthorne, Colorado, and the Zion National Park Visitor Center in Springdale, Utah, were both completed and occupied during the spring of 2000.

  19. Cost-derived indices for building design and construction ...

    African Journals Online (AJOL)

    Also as multiples of gfi, substructure cost index, sci and roofing cost index, rci could predict componental costs of substructure and roofing for phased development purposes. Keywords: Cost Indices, Building Design, Building Construction Journal of Modeling, Design and Management of Engineering Systems, Vol.

  20. 23 CFR 710.313 - Design-build projects.

    Science.gov (United States)

    2010-04-01

    ... FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RIGHT-OF-WAY AND ENVIRONMENT RIGHT-OF-WAY AND REAL ESTATE Project Development § 710.313 Design-build projects. (a) In the case of a design-build project, right-of-way must be acquired and cleared in accordance with the Uniform Relocation Assistance...

  1. Book review. Design for Care: Innovating Healthcare Experience

    Directory of Open Access Journals (Sweden)

    Manuela Aguirre Ulloa

    2014-12-01

    Full Text Available Adapted from a review on the same book published by The Design Observer Group on April 4th, 2014. You can access the original publication online at http://designobserver.com/feature/design-for-care/38382/ Peter Jones´ recently published book represents a timely and comprehensive view of the value design brings to healthcare innovation. The book uses an empathic user story that conveys emotions and life to a structure that embraces the different meanings of Design for Care: Spanning from caring at the personal level to large-scale caring systems. The author has a main objective for each of its three main target audiences: Designers, companies and healthcare teams. Firstly, it allows designers to understand healthcare in a holistic and patient-centered way, breaking down specialized silos. Secondly, it shows how to design better care experiences across care continuums. Consequently, for companies serving the healthcare sector, the book presents how to humanize information technology (IT and services and meet the needs of health seekers. Finally, the book aims to inform healthcare teams (clinical practitioners and administrators the value design brings in research, co-creation and implementation of user and organizational experiences. It also proposes that healthcare teams learn and adopt design and systems thinking techniques so their innovation processes can be more participatory, holistic and user-centered.

  2. Re-conceiving building design quality: A review of building users in their social context.

    Science.gov (United States)

    Watson, Kelly J; Evans, James; Karvonen, Andrew; Whitley, Tim

    2016-05-01

    Considerable overlap exists between post-occupancy research evaluating building design quality and the concept of 'social value', popularised by its recent application to issues of the public realm. To outline this potential research agenda, the paper reviews design quality research on buildings in relation to users and their social context where the term 'social context' refers to building user group dynamics, a combination of organisational cultures, management strategies, and social norms and practices. The review is conducted across five key building types, namely housing, workplaces, healthcare, education, and the retail/service sector. Research commonalities and gaps are identified in order to build a more comprehensive picture of the design quality literature and its handling of users in their social context. The key findings concerning each building type are presented visually. It is concluded that the design quality field comprises a patchwork of relatively isolated studies of various building types, with significant potential for theoretical and empirical development through interdisciplinary collaboration. Users tend to be conceived as anonymous and autonomous individuals with little analysis of user identity or interaction. Further, the contextual impact of user group dynamics on the relationship between building design and building user is rarely addressed in the literature. Producing a more nuanced understanding of users in situ is proposed as an important area for future design quality research.

  3. Architectural design of an advanced naturally ventilated building form

    Energy Technology Data Exchange (ETDEWEB)

    Lomas, K.J. [De Montfort University, Leicester (United Kingdom). Institute of Energy and Sustainable Development

    2007-02-15

    Advanced stack-ventilated buildings have the potential to consume much less energy for space conditioning than typical mechanically ventilated or air-conditioned buildings. This paper describes how environmental design considerations in general, and ventilation considerations in particular, shape the architecture of advanced naturally ventilated (ANV) buildings. The attributes of simple and advanced naturally ventilated buildings are described and a taxonomy of ANV buildings presented. Simple equations for use at the preliminary design stage are presented. These produce target structural cross section areas for the key components of ANV systems. The equations have been developed through practice-based research to design three large educational buildings: the Frederick Lanchester Library, Coventry, UK; the School of Slavonic and East European Studies, London, UK; the Harm A. Weber Library, Elgin, near Chicago, USA. These buildings are briefly described and the sizes of the as-built ANV features compared with the target values for use in preliminary design. The three buildings represent successive evolutionary stages: from advanced natural ventilation, to ANV with passive downdraught cooling, and finally ANV with HVAC support. Hopefully the guidance, simple calculation tools and case study examples will give architects and environmental design consultants confidence to embark on the design of ANV buildings. (author)

  4. Building Competitive Advantage Through Open Innovation : A case study in the financial technology sector

    OpenAIRE

    Jonsson Holm, Erik; Andersson, Felix

    2018-01-01

    The modern financial industry includes fast-changing technology, new regulations, and markets where companies at times find themselves at disadvantage. This study focuses on how organizations can build competitive advantage, particularly by drawing on the open innovation concept. We conceptualize its relationship to competitive advantage as a strategy of using and developing dynamic capabilities in business ecosystems. This view is empirically analysed through qualitative data from four organ...

  5. Investigation of innovative thermochemical energy storage processes and materials for building applications

    OpenAIRE

    Aydin, Devrim

    2016-01-01

    In this study, it is aimed to develop an innovative thermochemical energy storage system through material, reactor and process based investigations for building space heating applications. The developed system could be integrated with solar thermal collectors, photovoltaic panels or heat pumps to store any excess energy in the form of heat for later use. Thereby, it is proposed to address the problem of high operational costs and CO2 emissions released by currently used fossil fuel based heat...

  6. Healthcare Building Sustainability Assessment tool - Sustainable Effective Design criteria in the Portuguese context

    International Nuclear Information System (INIS)

    Castro, Maria de Fátima; Mateus, Ricardo; Bragança, Luís

    2017-01-01

    Tools and methods to improve current practices and quality in the healthcare building sector are necessary to support decision-making at different building life cycle phases. Furthermore, Healthcare Building Sustainability Assessment (HBSA) Methods are based on criteria organised into different levels, such as categories and indicators. These criteria highlight aspects of significant importance when designing and operating a sustainable healthcare building. To bring more objectivity to the sustainability assessments, the standardisation bodies (CEN and ISO) proposed core indicators that should be used in the evaluation of the environmental, societal and economic performances of buildings. Nevertheless, relying on state of the art analysis, it is possible to conclude that there are aspects of major importance for the operation of healthcare buildings that are not considered in the HBSA methods. Thus, the aim of this paper is to discuss the context of sustainability assessment methods in the field of healthcare buildings and to present a proposal for the incorporation of Sustainable-Effective Design (SED) criteria in a new HBSA method. The used research method is innovative since in the development of the list of sustainability criteria it considers the opinion of main healthcare buildings' stakeholders, the existing healthcare assessment methods and the ISO and CEN standardisation works in the field of the methods to assess the sustainability of construction works. As a result, the proposed method is composed of fifty-two sustainability indicators that cover the different dimensions of the sustainability concept to support decision making during the design of a new or retrofitted healthcare building in urban areas. - Highlights: •A new system to assess the sustainability of healthcare buildings is presented. •We propose a method to develop the list of sustainability indicators for hospitals. •We propose a new concept – Sustainable-Effective Design (SED

  7. Sensitivity Analysis Applied in Design of Low Energy Office Building

    DEFF Research Database (Denmark)

    Heiselberg, Per; Brohus, Henrik

    2008-01-01

    satisfies the design requirements and objectives. In the design of sustainable Buildings it is beneficial to identify the most important design parameters in order to develop more efficiently alternative design solutions or reach optimized design solutions. A sensitivity analysis makes it possible...

  8. Application of Sensitivity Analysis in Design of Sustainable Buildings

    DEFF Research Database (Denmark)

    Heiselberg, Per; Brohus, Henrik; Hesselholt, Allan Tind

    2007-01-01

    satisfies the design requirements and objectives. In the design of sustainable Buildings it is beneficial to identify the most important design parameters in order to develop more efficiently alternative design solutions or reach optimized design solutions. A sensitivity analysis makes it possible...

  9. The Habitation Lab: Using a Design Approach to Foster Innovation for Sustainable Living

    Directory of Open Access Journals (Sweden)

    Paula Femenías

    2013-11-01

    Full Text Available This article describes a first step towards a strategy for using living labs as a means to foster innovation and develop new concepts of sustainable living from an architectural point of view. The overall aim is to enable truly sustainable living through radically reduced energy and resource use thus addressing both environmental and social aspects of sustainability. Earlier research has shown that contemporary housing developments, including those with a sustainable profile, do not profoundly question modern lifestyles and consumption, which is a necessity to overcome limitations of a technological focus on environmental efficiency in construction. Thus, we see an opportunity for the discipline of architecture to engage in current investments in living lab facilities in order to push innovation in the field of sustainable housing. We introduce the concept of a "Habitation Lab", which will provide an arena for radical and high-risk design experimentation between users, building-sector actors, and academia, and we describe a case study of a planned Habitation Lab within a living lab facility where traditional solutions for daily living and habitation are questioned and new architectural innovations are explored and evaluated. The idea of using experimental activities in the field of housing is not new, and we argue that new investments should build on earlier experiences to avoid perpetuating misconceptions and repeating past failures. Furthermore, to ensure the dissemination and uptake of results, the design of the Habitation Lab should consider the innovation and learning trajectories of the building sector. We propose a transdisciplinary setting to provide a neutral arena for value creation and to increase the distribution of experiences.

  10. Design Intend Solving: Dynamic Composition Method for Innovative Design Based on Virtual Cloud Manufacturing Resource Generators

    Directory of Open Access Journals (Sweden)

    Yi-Cong Gao

    2013-01-01

    Full Text Available Recently, there has been growing interest in composition of cloud manufacturing resources (CMRs. Composition of CMRs is a feasible innovation to fulfill the user request while single cloud manufacturing resource cannot satisfy the functionality required by the user. In this paper, we propose a new case-based approach for the composition of CMRs. The basic idea of the present approach is to provide a computational framework for the composition of CMRs by imitating the common design method of reviewing past designs to obtain solution concepts for a new composite cloud manufacturing resource (CCMR. A notion of virtual cloud manufacturing resource generators (VCMRGs is introduced to conceptualize and represent underlying CCMRs contained in existing CCMRs. VCMRGs are derived from previous CCMRs and serve as new conceptual building blocks for the composition of CMRs. Feasible composite CMRs are generated by combining VCMRGs using some adaptation rules. The reuse of prior CCMRs is accomplished via VCMRGs within the framework of case-based reasoning. We demonstrate that the proposed approach yields lower execution time for fulfilling user request and shows good scalability.

  11. Building Partnerships by Design or by Default?

    Science.gov (United States)

    2012-05-24

    Florida Incursions 1810- 1819 ................................................................................ 10  Spanish-American War 1898-1901...Department of Defense, QDR Execution Roadmap Building Partnership Capacity Report (Washington DC: Department of Defense, 22 May 2006), 4. 1...weapons, making total war between these nations certain suicide for the aggressor and attacked alike. What is required, to avoid war with China for

  12. Product innovation as a key success factor to build sustainable brand equity

    Directory of Open Access Journals (Sweden)

    Jalal Hanaysha

    2015-06-01

    Full Text Available In highly competitive markets, building brand equity has become one of the first priorities for many organizations as it brings several benefits and reputation for them. Past researches have acknowledged that consumers look for brands which provide them with differential values through innovative product and service features. However, despite the importance of product innovation in determining an organization’s success, very limited studies have intended to examine its effect on brand equity. In the present study, we aim to examine the effect of product innovation on brand equity in Malaysian automotive market. The data were collected from 287 passenger cars owners through self-administered questionnaire at several shopping malls in northern Malaysia. The findings revealed that product innovation had significant positive effect on overall brand equity and its dimensions namely; brand awareness, brand loyalty, brand image, and brand leadership. Based on the results of this study, several implications are discussed to enlighten our knowledge on important innovation activities that could develop favorable brand equity. Finally, limitations and future research suggestions are highlighted to gain better insights on brand equity development.

  13. Design and testing of an innovative solar radiation measurement device

    International Nuclear Information System (INIS)

    Badran, Omar; Al-Salaymeh, Ahmed; El-Tous, Yousif; Abdala, Wasfi

    2010-01-01

    After review of studies conducted on the solar radiation measuring systems, a new innovative instrument that would help in measuring the accurate solar radiation on horizontal surfaces has been designed and tested. An advanced instrument with ease of use and high precision that would enable the user to take the readings in terms of solar intensity (W/m 2 ) has been tested. Also, the innovative instrument can record instantaneous readings of the solar intensities as well as the averages value of the solar radiation flux during certain periods of time. The instrument based in its design on being programmed by programmable interfacing controller (PIC). Furthermore, the power supply circuit is fed by the solar energy cells and does not need an external power source.

  14. Innovation and Standardization in School Building: A Proposal for the National Code in Italy.

    Science.gov (United States)

    Ridolfi, Giuseppe

    This document discusses the University of Florence's experience and concepts as it developed the research to define a proposal for designing a new national school building code. Section 1 examines the current school building code and the Italian Reform Process in Education between 1960 and 2000. Section 2 details and explains the new school…

  15. Engaging Actors in Co-Designing Heterogeneous Innovations

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik; Lindegaard, Hanne; Rosenqvist, Tanja Schultz

    2011-01-01

    In this paper we share and analyze our experiences staging a co-design process in which we through different interventions engage important actors in designing. Our experiences are taking from an innovation and research project about user-involvement in textile design processes. As the project...... in our project’s agenda by going through the different stages of translation. The paper is finalized with reflections on the difficulties in engaging actors in a co-design process and transporting results into the existing framed context of design and architectural work....... related to translating and transporting the results of these different events due to the institutional and professional framing of projects and design processes. We are analyzing these through an actor network approach and use the translation term to describe how the participants slowly became engaged...

  16. Strategic Design as Agile Driver in Innovating SME´s

    DEFF Research Database (Denmark)

    Ludvigsen, Martin; Rasmussen, Jørgen

    2012-01-01

    of strategic design must be based on actual ongoing processes in live business cases in order to be relevant to a wider audience. The value of purely speculative strategic design research reflections is diminishing as the research field is maturing and solidifying. The work reported in this paper highly......Strategic Design as Agile Driver in Innovating SME´s Poster-paper abstract, DMI2012 conference Martin Ludvigsen and Jørgen Rasmussen Aarhus School of Architecture, Department of Design Nørreport 20, 8000 Aarhus C, Denmark martin.ludvigsen@aarch.dk, jorgen.rasmussen@aarch.dk The paper reports...... on the last four years of research into strategic design (SD) at Aarhus School of Architecture, Denmark. Under the heading of organizational change and business development through design and user driven value identification, the authors have conducted a range of practice-based SD research projects engaging...

  17. Advanced design cultures long-term perspective and continuous innovation

    CERN Document Server

    2015-01-01

    This book describes new thinking and practice in Advanced Design (ADD) – design that is not merely highly developed but anticipates the future by envisioning novel products and processes. The focus is especially on the front end of innovation and the search for solutions in complex pioneering processes using design-related tools and practices. The book opens by describing these tools, the approaches that characterize ADD, and its historical dimension. Specific fields in which ADD has flourished are then examined, exploring the dynamics between research and design. The coverage ranges from transportation, lighting, and electrical appliances through to business networks, technology parks, and the development of ground-breaking materials. AdvanceDesign is the name of the research group at the Politecnico di Milano (Italy’s largest technical university) of which the authors are members. It was chosen to reflect both the “advanced”, tangible dimension of design in terms of modern product development, mater...

  18. Energy Conservation of the Designated Government Buildings in Thailand

    Directory of Open Access Journals (Sweden)

    Wangskarn Prapat

    2016-01-01

    Full Text Available The designated government buildings have implemented and administered energy program under the energy development and promotion Act 2007 for many years continuously until 2015. Appointment person responsible for energy, performing energy management and implementing the energy conservation work plan and measures are legal requirements for the designated buildings. Therefore, the ministry of Energy has launched the project to support the implementation of energy management. The aim of the project was to create the energy management system in the designated government buildings, and to reduce energy consumption. In this paper, the evaluation of the project has been presented from the achievements of 839 designated government buildings. The energy saving is more than 440 ktoe/year. This is about 3% of energy consumptions of buildings.

  19. Building configuration and seismic design: The architecture of earthquake resistance

    Science.gov (United States)

    Arnold, C.; Reitherman, R.; Whitaker, D.

    1981-05-01

    The architecture of a building in relation to its ability to withstand earthquakes was determined. Aspects of round motion which are significant to building behavior are discussed. Results of a survey of configuration decisions that affect the performance of buildings with a focus on the architectural aspects of configuration design are provided. Configuration derivation, building type as it relates to seismic design, and seismic design, and seismic issues in the design process are examined. Case studies of the Veterans' Administration Hospital in Loma Linda, California, and the Imperial Hotel in Tokyo, Japan, are presented. The seismic design process is described paying special attention to the configuration issues. The need is stressed for guidelines, codes, and regulations to ensure design solutions that respect and balance the full range of architectural, engineering, and material influences on seismic hazards.

  20. H3Africa and the African life sciences ecosystem: building sustainable innovation.

    Science.gov (United States)

    Dandara, Collet; Huzair, Farah; Borda-Rodriguez, Alexander; Chirikure, Shadreck; Okpechi, Ikechi; Warnich, Louise; Masimirembwa, Collen

    2014-12-01

    Interest in genomics research in African populations is experiencing exponential growth. This enthusiasm stems in part from the recognition that the genomic diversity of African populations is a window of opportunity for innovations in postgenomics medicine, ecology, and evolutionary biology. The recently launched H3Africa initiative, for example, captures the energy and momentum of this interest. This interdisciplinary socio-technical analysis highlights the challenges that have beset previous genomics research activities in Africa, and looking ahead, suggests constructive ways H3Africa and similar large scale science efforts could usefully chart a new era of genomics and life sciences research in Africa that is locally productive and globally competitive. As independent African scholars and social scientists, we propose that any serious global omics science effort, including H3Africa, aiming to build genomics research capacity and capability in Africa, needs to fund the establishment of biobanks and the genomic analyses platforms within Africa. Equally they need to prioritize community engagement and bioinformatics capability and the training of African scientists on these platforms. Historically, the financial, technological, and skills imbalance between Africa and developed countries has created exploitative frameworks of collaboration where African researchers have become merely facilitators of Western funded and conceived research agendas involving offshore expatriation of samples. Not surprisingly, very little funding was allocated to infrastructure and human capital development in the past. Moving forward, capacity building should materialize throughout the entire knowledge co-production trajectory: idea generation (e.g., brainstorming workshops for innovative hypotheses development by African scientists), data generation (e.g., genome sequencing), and high-throughput data analysis and contextualization. Additionally, building skills for political science

  1. Creating Ribo-T: (Design, Build, Test)n.

    Science.gov (United States)

    Carlson, Erik D

    2015-11-20

    Engineering biology is especially challenging given our relatively poor ability to rationally design within life's complex design landscape. Thus, moving through the engineering "design, build, test" cycle multiple times accumulates system knowledge and hopefully yields a successful design. Here I discuss the engineering process behind our recently published work creating a ribosome with tethered subunits, Ribo-T.

  2. Analyzing Design Heating Loads in Superinsulated Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Arena, Lois [Consortium for Advanced Residential Buildings, Norwalk, CT (United States)

    2015-06-16

    The U.S. Department of Energy’s Building America research team Consortium for Advanced Residential Buildings (CARB) worked with the EcoVillage cohousing community in Ithaca, New York, on the Third Residential EcoVillage Experience neighborhood. This communityscale project consists of 40 housing units—15 apartments and 25 single-family residences. Units range in size from 450 ft2 to 1,664 ft2 and cost from $80,000 for a studio apartment to $235,000 for a three- or four-bedroom single-family home. For the research component of this project, CARB analyzed current heating system sizing methods for superinsulated homes in cold climates to determine if changes in building load calculation methodology should be recommended. Actual heating energy use was monitored and compared to results from the Air Conditioning Contractors of America’s Manual J8 (MJ8) and the Passive House Planning Package software. Results from that research indicate that MJ8 significantly oversizes heating systems for superinsulated homes and that thermal inertia and internal gains should be considered for more accurate load calculations.

  3. Earth as Building Material – an overview of RILEM activities and recent Innovations in Geotechnics

    Directory of Open Access Journals (Sweden)

    Vyncke Johan

    2018-01-01

    Full Text Available This paper presents an overview of the different earth building techniques, the latest innovations and the normative aspects. The oldest man made earth constructions known to exist date back to 10 000 BC. Since then, earth has remained a popular building material throughout history. With time, different techniques evolved, starting from sundried adobe blocks to cob constructions, rammed earth walls and compressed earth bricks. Today these techniques are still being optimized and alternative binders, specifically adapted admixtures and surface treatments are being developed. Even though nearly one third of the world’s population lives in an earth construction, few specific building standards and testing methods exist. Many of the tests used today are based on tests for concrete and thus do not take into account the complex nature of earth constructions, such as their sensitivity to water. RILEM, the union of Laboratories and Experts in Construction Materials, Systems and Structures, set up a new Technical Committee in 2016: TC TCE (Testing and Characterisation of Earth-based building materials and elements. This committee, consisting of an international group of experts on the topic, aim to define testing procedures for earth as a building construction material. To end with, this paper also gives a short introduction to “Deep soil mixing”, an “earth” building technique dedicated to geotechnical engineering.

  4. Building Integrated Design Practice under the Concept of Sustainable Development

    Science.gov (United States)

    Liu, Xuexin

    2018-03-01

    With the continuous development of social economy, people are more demanding for architecture. Some advanced design concepts are gradually applied to the design of buildings. Under the concept of sustainable development, building integration design has also been widely used to promote the rapid development of architectural design. Integrated design concepts and sustainable development concepts play an important role to meet people’s requirements. This article will explore the concept of sustainable development under the concept of integrated architectural design and practice analysis, propose appropriate measures.

  5. design innovations towards enhancing the quality of living in multi ...

    African Journals Online (AJOL)

    Prince Acheampong

    1Department of Architecture, Faculty of Architecture and Building Technology. 2Institute of ... The compound house is one of the most versatile housing designs that most low-income households presently enjoy in ... Since the compound housing principle is more towards communal living and the sharing of facilities, these.

  6. Applying and incorporating user driven innovation when designing concepts

    DEFF Research Database (Denmark)

    Thorp Hansen, Claus; Brønnum, Louise

    This paper addresses the difficulties seen when working within the user driven innovation [UDI] paradigm. We examine some of the circumstances that often make it difficult to work with user insights in concept design. UDI has become a recognized design approach, but has not yet accommodated...... a design practice explicitly considering the type of user insights this approach implies. For that reason UDI has yet to prove itself and its potential effect; a study of Danish initiative “program for user driven innovation” has shown little effect in this regard. However it has shown that radical new...... insights have been produced but at the same time to abstract when integrated in the design process. We will discuss and propose a framework for working with user insights in concept design, based on existing concept frameworks but actively addressing and incorporating user insights as a new type of input...

  7. Designing of zero energy office buildings in hot arid climate

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Gwad, Mohamed

    2011-07-01

    The designing of office buildings by using large glass areas to have a transparent building is an attractive approach in the modern office building architecture. This attitude increases the energy demand for cooling specially in the hot arid region which has long sun duration time, while the use of small glazing areas increases the energy demand for lighting. The use of uncontrolled natural ventilation increases the rate of hot ambient air flow which increases the building energy demand for cooling. At the same time, the use of mechanical ventilation to control the air change rate may increase the energy demand for fans. Some ideas such as low energy design concept are introduced for improving the building energy performance and different rating systems have been developed such as LEED, BREEAM and DGNB for evaluating building energy performance system. One of the new ideas for decreasing the dependence on fossil fuels and improving the use of renewable energy is the net zero-energy building concept in which the building generates enough renewable energy on site to equal or exceed its annual energy use. This work depends on using the potentials of mixing different energy strategies such as hybrid ventilation strategy, passive night cooling, passive chilled ceiling side by side with the integrating of photovoltaic modules into the building facade to produce energy and enrich the architectural aesthetics and finally reaching the Net Zero Energy Building. There are different definitions for zero energy buildings, however in this work the use of building-integrated Photovoltaic (BIPV) to provide the building with its annual energy needs is adopted, in order to reach to a Grid-Connected Net-Zero Energy Office Building in the hot arid desert zone represented by Cairo, Egypt. (orig.)

  8. Integrated Building Energy Design of a Danish Office Building Based on Monte Carlo Simulation Method

    DEFF Research Database (Denmark)

    Sørensen, Mathias Juul; Myhre, Sindre Hammer; Hansen, Kasper Kingo

    2017-01-01

    The focus on reducing buildings energy consumption is gradually increasing, and the optimization of a building’s performance and maximizing its potential leads to great challenges between architects and engineers. In this study, we collaborate with a group of architects on a design project of a new...... office building located in Aarhus, Denmark. Building geometry, floor plans and employee schedules were obtained from the architects which is the basis for this study. This study aims to simplify the iterative design process that is based on the traditional trial and error method in the late design phases...

  9. Building Capacity For Innovation Through R&D Consortia in Health Projects: From Network Interaction to Systemic Transformation

    Directory of Open Access Journals (Sweden)

    Ria Hardiyati

    2017-12-01

    The research capacity in the area of vaccines has been long started from individual research conducted by researcher. It has been continued into organization research, and then developed into building innovation capacity through R&D consortia. However, in areas of stem cell there is still lack of evidence but it directly leaps to build innovation capacity through R&D consortia. Therefore further empirical evidence is needed to support the continuous trajectory.

  10. The Development of a Tool for Sustainable Building Design:

    DEFF Research Database (Denmark)

    Tine Ring Hansen, Hanne; Knudstrup, Mary-Ann

    2009-01-01

    for sustainable buildings, as well as, an analysis of the relationship between the different approaches (e.g. low-energy, environmental, green building, solar architecture, bio-climatic architecture etc.) to sustainable building design and these indicators. The paper furthermore discusses how sustainable......The understanding of sustainable building has changed over time along with the architectural interpretation of sustainability. The paper presents the results of a comparative analysis of the indicators found in different internationally acclaimed and Danish certification schemes and standards...... architecture will gain more focus in the coming years, thus, establishing the need for the development of a new tool and methodology, The paper furthermore describes the background and considerations involved in the development of a design support tool for sustainable building design. A tool which considers...

  11. Building Innovation Capacity: The Role of Human Capital Formation in Enterprises--A Review of the Literature. Occasional Paper

    Science.gov (United States)

    Smith, Andrew; Courvisanos, Jerry; Tuck, Jacqueline; McEachern, Steven

    2011-01-01

    This literature review examines the role of human capital formation in building innovative capacity in firms. The aim of the review is to develop a model of human capital development factors to be used as a basis for a larger research project where the factors that develop innovation capacity in enterprises will be investigated. The review finds…

  12. Competence Building

    DEFF Research Database (Denmark)

    Borrás, Susana; Edquist, Charles

    The main question that guides this paper is how governments are focusing (and must focus) on competence building (education and training) when designing and implementing innovation policies. With this approach, the paper aims at filling the gap between the existing literature on competences...... on the one hand, and the real world of innovation policy-making on the other, typically not speaking to each other. With this purpose in mind, this paper discusses the role of competences and competence-building in the innovation process from a perspective of innovation systems; it examines how governments...... and public agencies in different countries and different times have actually approached the issue of building, maintaining and using competences in their innovation systems; it examines what are the critical and most important issues at stake from the point of view of innovation policy, looking particularly...

  13. Innovative approaches to clinical development and trial design

    Directory of Open Access Journals (Sweden)

    John J Orloff

    2011-01-01

    Full Text Available Pharmaceutical innovation is increasingly risky, costly and at times inefficient, which has led to a decline in industry productivity. Despite the increased investment in R&D by the industry, the number of new molecular entities achieving marketing authorization is not increasing. Novel approaches to clinical development and trial design could have a key role in overcoming some of these challenges by improving efficiency and reducing attrition rates. The effectiveness of clinical development can be improved by adopting a more integrated model that increases flexibility and maximizes the use of accumulated knowledge. Central to this model of drug development are novel tools, including modelling and simulation, Bayesian methodologies, and adaptive designs, such as seamless adaptive designs and sample-size re-estimation methods. Applications of these methodologies to early- and late-stage drug development are described with some specific examples, along with advantages, challenges, and barriers to implementation. Because they are so flexible, these new trial designs require significant statistical analyses, simulations and logistical considerations to verify their operating characteristics, and therefore tend to require more time for the planning and protocol development phase. Greater awareness of the distinct advantages of innovative designs by regulators and sponsors are crucial to increasing the adoption of these modern tools.

  14. Canister storage building design basis accident analysis documentation

    International Nuclear Information System (INIS)

    KOPELIC, S.D.

    1999-01-01

    This document provides the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report

  15. Canister storage building design basis accident analysis documentation

    Energy Technology Data Exchange (ETDEWEB)

    KOPELIC, S.D.

    1999-02-25

    This document provides the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  16. Passive solar energy-efficient architectural building Design ...

    African Journals Online (AJOL)

    In this paper analyses have been done on the climate data for various climatic regions in North Cyprus to obtain physical architectural building design specification with a view to develop passive solar energy-efficient building. It utilizes a computer program, ARCHIPAK, together with climate data (for 25 year period) to get ...

  17. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    International Nuclear Information System (INIS)

    CROWE, R.D.

    1999-01-01

    This document provides the detailed accident analysis to support ''HNF-3553, Spent Nuclear Fuel Project Final Safety, Analysis Report, Annex A,'' ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report

  18. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    International Nuclear Information System (INIS)

    CROWE, R.D.; PIEPHO, M.G.

    2000-01-01

    This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report

  19. Analyzing Design Heating Loads in Superinsulated Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Arena, Lois [Consortium for Advanced Residential Buildings, Norwalk, CT (United States)

    2015-06-01

    Super-insulated homes offer many benefits including improved comfort, reduced exterior noise penetration, lower energy bills, and the ability to withstand power and fuel outages under much more comfortable conditions than a typical home. While these homes aren't necessarily constructed with excessive mass in the form of concrete floors and walls, the amount of insulation and the increase in the thickness of the building envelope can lead to a mass effect, resulting in the structures ability to store much more heat than a code built home. This results in a very low thermal inertia making the building much less sensitive to drastic temperature swings thereby decreasing the peak heating load demand. During the winter of 2013/2014, CARB monitored the energy use of three homes in climate zone 6 in an attempt to evaluate the accuracy of two different mechanical system sizing methods for low load homes. Based on the results, it is recommended that internal and solar gains be included and some credit for thermal inertia be used in sizing calculations for super insulated homes.

  20. Seismic design of RC buildings theory and practice

    CERN Document Server

    Manohar, Sharad

    2015-01-01

    This book is intended to serve as a textbook for engineering courses on earthquake resistant design. The book covers important attributes for seismic design such as material properties, damping, ductility, stiffness and strength. The subject coverage commences with simple concepts and proceeds right up to nonlinear analysis and push-over method for checking building adequacy. The book also provides an insight into the design of base isolators highlighting their merits and demerits. Apart from the theoretical approach to design of multi-storey buildings, the book highlights the care required in practical design and construction of various building components. It covers modal analysis in depth including the important missing mass method of analysis and tension shift in shear walls and beams. These have important bearing on reinforcement detailing. Detailed design and construction features are covered for earthquake resistant design of reinforced concrete as well as confined and reinforced masonry structures. Th...

  1. One style to build them all: Corporate culture and innovation in the offshore wind industry

    International Nuclear Information System (INIS)

    Sovacool, Benjamin K.; Enevoldsen, Peter

    2015-01-01

    This study explores how Vestas and Siemens Wind Power manage technological innovation in the offshore wind power industry. It utilizes the concept of open and closed “research styles” to investigate how each company designs, constructs, and maintains offshore wind turbines. The article starts by summarizing three of the main innovation challenges facing the offshore wind sector—harsh conditions, capital intensity, and production bottlenecks—before it delves into the specific details about how Vestas and Siemens Wind Power approach turbine development. It divides this discussion into six distinct segments: resources and expenditures, stakeholder involvement and collaboration, testing and maintenance, control and knowledge management, adaptability of designs, and customization and marketing. The study finds that both Vestas and SWP, despite their corporate and cultural differences, utilize the same elements of closed and open styles. It lastly suggests that the notion of style itself may challenge certain assumptions held by scholars about managing the research and innovation process. - Highlights: • This study explores how Vestas and Siemens approach innovation in offshore wind turbine technology. • Open research styles are inclusive, participatory, cooperative, and flexible. • Closed research styles are exclusive, competitive, centralized, and rigid. • Interestingly, Vestas and Siemens use the same style to manage technological innovation. • They are closed when it comes to resources and expenditures and knowledge movement, but open in all other attributes.

  2. Innovating urinary catheter design: An introduction to the engineering challenge.

    Science.gov (United States)

    Murphy, Cathy

    2018-05-01

    Every day, people around the world rely on intermittent and indwelling urinary catheters to manage bladder dysfunction, but the potential or actual harm caused by these devices is well-recognised. Current catheter designs can cause urinary tract infection and septicaemia, bladder and urethral trauma and indwelling devices frequently become blocked. Furthermore, the devices can severely disrupt users' lives, limiting their daily activities and can be costly to manage for healthcare providers. Despite this, little significant design innovation has taken place in the last 80 years. In this article current catheter designs and their limitations are reviewed, common catheter-associated problems are outlined and areas of design ripe for improvement proposed. The potential to relieve the individual and economic burden of catheter use is high.

  3. Economical optimization of building elements for use in design of nearly zero energy buildings

    DEFF Research Database (Denmark)

    Hansen, Sanne

    2012-01-01

    Nearly zero energy buildings are to become a requirement as part of the European energy policy. There are many ways of designing nearly zero energy buildings, but there is a lack of knowledge on how to end up with the most economical optimal solution. Therefore this paper present a method...... for finding the economical optimal solutions based on the use of the cost of conserved energy for each main building envelope part and building service system and cost of produced energy for each energy producing system. By use of information on construction cost and developed models of the yearly energy use...

  4. Innovation

    Science.gov (United States)

    EPA frames innovation as critical to the protection of human health and the environment through initiatives such as sustainable practices, innovative research, prize competitions, innovation awards, partnerships, and community activities.

  5. Integral Design methodology for Industrial Collaboration Design of Sustainable Industrial Flexible Demountable buildings

    NARCIS (Netherlands)

    Zeiler, W.; Quanjel, E.M.C.J.; Bauer, M.; Lima, C.

    2007-01-01

    Starting in 1998 from developing and designing their own office Kropman, a major Dutch Building Services contractor, developed a new methodology for structuring and documenting integral design processes. Integral design is meant to integrate the different disciplines involved in the building design

  6. BEYOND GREEN BUILDINGS: AN INTEGRATED HOLISTIC DESIGN APPROACH

    Science.gov (United States)

    Technical Challenge: The Urban Sustainable Infrastructure Engineering Program (USIEP) at the University of Colorado at Denver is designing a Sustainable Youth Zone (SYZ) building in a disadvantaged community in Commerce City, CO. The SYZ utilizes a holistic ...

  7. ITER [International Thermonuclear Experimental Reactor] reactor building design study

    International Nuclear Information System (INIS)

    Thomson, S.L.; Blevins, J.D.; Delisle, M.W.

    1989-01-01

    The International Thermonuclear Experimental Reactor (ITER) is at the midpoint of a two-year conceptual design. The ITER reactor building is a reinforced concrete structure that houses the tokamak and associated equipment and systems and forms a barrier between the tokamak and the external environment. It provides radiation shielding and controls the release of radioactive materials to the environment during both routine operations and accidents. The building protects the tokamak from external events, such as earthquakes or aircraft strikes. The reactor building requirements have been developed from the component designs and the preliminary safety analysis. The equipment requirements, tritium confinement, and biological shielding have been studied. The building design in progress requires continuous iteraction with the component and system designs and with the safety analysis. 8 figs

  8. An innovative liquid metal design with worldwide application potential

    International Nuclear Information System (INIS)

    Quinn, J.E.; Berglund, R.C.

    1989-01-01

    This paper reports that the United States nuclear program has been faced with major political, economic and technical challenges in recent years. One US program element, the Liquid Metal Reactor, has addressed these challenges in a systematic, focused manner. The result is an innovative modular design incorporating safety features that utilize inherent characteristics. This Advanced Liquid Metal Reactor (ALMR) is based on the PRISM concept, originated by the General Electric Company in 1981. This design should also be attractive in other developed countries that have deployed, and/or are deploying, nuclear power. The design's safety features can achieve neutronic shutdown and decay heat removal without relying on operator action or engineered active safety features. The ALMR utilizes many innovations including: a passive reactor vessel air cooling system for decay heat removal; the use of a sealed reactor assembly; seismic isolation; electromagnetic primary pumps; and an in-vessel fuel transfer machine. The US ALMR design incorporates a metal fuel core as its reference, however, the required safety performance can also be achieved with an oxide core having similar safety features. This flexibility is particularly important when addressing world wide ALMR applications. The reference ALMR reactor module, of which there are nine in a typical 1395 MW e plant, has a -6 meter by -20 meter vessel and a 471 MW thermal output, with a reactor outlet temperature of 485 degrees C and an overall conversion efficiency of 33%. This plant uses a saturated steam cycle and a non-safety grade secondary sodium system

  9. Coevolutionary and genetic algorithm based building spatial and structural design

    NARCIS (Netherlands)

    Hofmeyer, H.; Davila Delgado, J.M.

    2015-01-01

    In this article, two methods to develop and optimize accompanying building spatial and structural designs are compared. The first, a coevolutionary method, applies deterministic procedures, inspired by realistic design processes, to cyclically add a suitable structural design to the input of a

  10. Spent nuclear fuel canister storage building conceptual design report

    Energy Technology Data Exchange (ETDEWEB)

    Swenson, C.E. [Westinghouse Hanford Co., Richland, WA (United States)

    1996-01-01

    This Conceptual Design Report provides the technical basis for the Spent Nuclear Fuels Project, Canister Storage Building, and as amended by letter (correspondence number 9555700, M.E. Witherspoon to E.B. Sellers, ``Technical Baseline and Updated Cost Estimate for the Canister Storage Building``, dated October 24, 1995), includes the project cost baseline and Criteria to be used as the basis for starting detailed design in fiscal year 1995.

  11. Spent nuclear fuel canister storage building conceptual design report

    International Nuclear Information System (INIS)

    Swenson, C.E.

    1996-01-01

    This Conceptual Design Report provides the technical basis for the Spent Nuclear Fuels Project, Canister Storage Building, and as amended by letter (correspondence number 9555700, M.E. Witherspoon to E.B. Sellers, ''Technical Baseline and Updated Cost Estimate for the Canister Storage Building'', dated October 24, 1995), includes the project cost baseline and Criteria to be used as the basis for starting detailed design in fiscal year 1995

  12. Building a wave energy policy focusing on innovation, manufacturing and deployment

    International Nuclear Information System (INIS)

    Dalton, G.; Gallachoir, B.P.O.

    2010-01-01

    The Irish Government has set a goal to make Ireland a world leader for research, development and deployment of ocean energy technologies. Ireland has a wave energy resource of 21 TWh and an ambition is to achieve at least 500 MW installed generating capacity from ocean energy by 2020. This paper investigates what is required to move from ambition to delivery. A successful wave energy strategy will require focused policies that will stimulate innovation to develop the technologies, manufacturing to produce the devices and deployment to build the required wave power plants. The paper draws on the successful policies in Ireland that have stimulated each of these dimensions, albeit for different sectors. From 2004 to 2008, successful policies in (ICT and biotech) innovation led to an increase in Ireland's Innovation Index score from 0.48 to 0.53. The policy focus on (food and pharmaceuticals) manufacturing in Ireland resulted in high levels of economic growth over the period 1998-2002, reaching >10% GDP growth levels per annum, and full employment. Successful wind energy policies deployment has accelerated rapidly since 2003 and reached 1.2 GW installed capacity in 2009 representing 15% of Ireland's total installed capacity. The paper draws on appropriate elements of these policies to build a successful wave energy policy for Ireland. It also draws on the successful policies adopted in Denmark for innovation, manufacturing and deployment of wind energy. The Danish wind turbine manufacturers hold a world market share of approximately 40%. The paper proposes establishing a wave energy strategy group to develop an action plan to deliver the 500 MW. It also proposes a novel extension of corporate tax specifically for wave energy companies, an initial 30% capital grant scheme for wave energy developers, a grid code for wave energy devices and fast tracking of planning decisions through an amended approach to strategic infrastructure. (author)

  13. Optimal tree design for daylighting in residential buildings

    Energy Technology Data Exchange (ETDEWEB)

    Hongbing, Wang [College of Landscape Architecture, Beijing Forestry University, 35, East Qinghua Rd., Beijing (China); Shanghai Botanical Garden, 1111, Longwu Rd., Shanghai (China); Jun, Qin; Yonghong, Hu [Shanghai Botanical Garden, 1111, Longwu Rd., Shanghai (China); Li, Dong [College of Landscape Architecture, Beijing Forestry University, 35, East Qinghua Rd., Beijing (China)

    2010-12-15

    Urban reforestation is advocated as an efficient countermeasure to the intensification of urban heat islands. The greening and beautification of residential quarters is one of the main concerns of residents, while lighting and ventilation are two main energy-consuming building services. Hence, the tree layout in green space between buildings is important, and it is necessary to determine the relationships between trees and buildings. This study takes Shanghai as a case study to optimize tree design between residential buildings and meet good daylighting requirements. Models were made using software such as AutoCAD and SketchUp. The relationships between maximum tree height and building separation were determined. For the same building layout, there were different tree height limits according to crown shape; the order of decreasing height limits was cylindrical, conical, spherical, and inverted conical crowns. Three cases having different green space between building layouts were studied. Their maximum tree heights differed. Overall, our model helps us realize good daylighting of a building environment. The formula allows us to determine which trees to plant between buildings in that we can predict the effects of future tree growth on building daylighting. (author)

  14. Invention, design and performance of coconut agrowaste fiberboards for ecologically efficacious buildings

    Science.gov (United States)

    Lokko, Mae-ling Jovenes

    As global quantities of waste by-products from food production as well as the range of their applications increase, researchers are realizing critical opportunities to transform the burden of underutilized wastes into ecological profits. Within the tropical hot-humid region, where half the world's current and projected future population growth is concentrated, there is a dire demand for building materials to meet ambitious development schemes and rising housing deficits. However, the building sector has largely overlooked the potential of local agricultural wastes to serve as alternatives to energy-intensive, imported building technologies. Industrial ecologists have recently investigated the use of agrowaste biocomposites to replace conventional wood products that use harmful urea-formaldehyde, phenolic and isocyanate resins. Furthermore, developments in the performance of building material systems with respect to cost, energy, air quality management and construction innovation have evolved metrics about what constitutes material 'upcycling' within building life cycle. While these developments have largely been focused on technical and cost performance, much less attention has been paid to addressing deeply-seated social and cultural barriers to adoption that have sedimented over decades of importation. This dissertation evaluates the development coconut agricultural building material systems in four phases: (i) non-toxic, low-energy production of medium-high density boards (500-1200 kg/m3) from coconut fibers and emerging biobinders; (ii) characterization and evaluation of coconut agricultural building materials hygrothermal performance (iii) scaled-up design development of coconut modular building material systems and (iv) development of a value translation framework for the bottom-up distribution of value to stakeholders within the upcycling framework. This integrated design methodological approach is significant to develop ecological thinking around agrowaste

  15. Engaged scholarship for designing product service system innovation opportunities in an industrial design course

    NARCIS (Netherlands)

    Lu, Y.; Baha, S.E.; Hsieh, P.H.

    2013-01-01

    This paper explores a design case study in an industrial design classroom in which actors with diverse expertise were involved for the creation of Product Service System (PSS) innovation opportunities in societal contexts. By engaging diverse experts from different fields, the classroom was turned

  16. Experiences with the design and production of an industrial, flexible and demountable (IFD) building system

    NARCIS (Netherlands)

    Gassel, van F.J.M.; Stone, W.C.

    2002-01-01

    The Dutch government encourages innovative construction by subsidizing cohesive industrial, flexible and demountable building (lFD) pilot projects. Industrial building concerns the process-related aspects of production. robotization, mechanization, automation, prefabrication, communication, etc.

  17. Robustness Issues for Design of Innovative Timber Structures

    DEFF Research Database (Denmark)

    Hald, Frederik; Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2013-01-01

    Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious conse-quences in case of failure. The present paper summaries issues with respect to robustness of timber structures. Two different...... large span timber structures are analyzed and based on these analyses the paper presents guidelines for the future development of innovative timber struc-tures which are robust with respect to design and execution errors, unforeseen degradation and other potential hazards....

  18. Method for innovative synthesis-design of chemical process flowsheets

    DEFF Research Database (Denmark)

    Kumar Tula, Anjan; Gani, Rafiqul

    Chemical process synthesis-design involve the identification of the processing route to reach a desired product from a specified set of raw materials, design of the operations involved in the processing route, the calculations of utility requirements, the calculations of waste and emission...... to the surrounding and many more. Different methods (knowledge-based [1], mathematical programming [2], hybrid, etc.) have been proposed and are also currently employed to solve these synthesis-design problems. D’ Anterroches [3] proposed a group contribution based approach to solve the synthesis-design problem...... of chemical processes, where, chemical process flowsheets could be synthesized in the same way as atoms or groups of atoms are synthesized to form molecules in computer aided molecular design (CAMD) techniques [4]. That, from a library of building blocks (functional process-groups) and a set of rules to join...

  19. Multi-Criteria Approach in Multifunctional Building Design Process

    Science.gov (United States)

    Gerigk, Mateusz

    2017-10-01

    The paper presents new approach in multifunctional building design process. Publication defines problems related to the design of complex multifunctional buildings. Currently, contemporary urban areas are characterized by very intensive use of space. Today, buildings are being built bigger and contain more diverse functions to meet the needs of a large number of users in one capacity. The trends show the need for recognition of design objects in an organized structure, which must meet current design criteria. The design process in terms of the complex system is a theoretical model, which is the basis for optimization solutions for the entire life cycle of the building. From the concept phase through exploitation phase to disposal phase multipurpose spaces should guarantee aesthetics, functionality, system efficiency, system safety and environmental protection in the best possible way. The result of the analysis of the design process is presented as a theoretical model of the multifunctional structure. Recognition of multi-criteria model in the form of Cartesian product allows to create a holistic representation of the designed building in the form of a graph model. The proposed network is the theoretical base that can be used in the design process of complex engineering systems. The systematic multi-criteria approach makes possible to maintain control over the entire design process and to provide the best possible performance. With respect to current design requirements, there are no established design rules for multifunctional buildings in relation to their operating phase. Enrichment of the basic criteria with functional flexibility criterion makes it possible to extend the exploitation phase which brings advantages on many levels.

  20. Building smart cities analytics, ICT, and design thinking

    CERN Document Server

    Stimmel, Carol L

    2015-01-01

    The term "smart city" defines the new urban environment, one that is designed for performance through information and communication technologies. Given that the majority of people across the world will live in urban environments within the next few decades, it's not surprising that massive effort and investment is being placed into efforts to develop strategies and plans for achieving "smart" urban growth. Building Smart Cities: Analytics, ICT, and Design Thinking explains the technology and a methodology known as design thinking for building smart cities. Information and communications technologies form the backbone of smart cities. A comprehensive and robust data analytics program enables the right choices to be made in building these cities. Design thinking helps to create smart cities that are both livable and able to evolve. This book examines all of these components in the context of smart city development and shows how to use them in an integrated manner. Using the principles of design thinking to refr...

  1. Optimizing Energy Consumption in Building Designs Using Building Information Model (BIM

    Directory of Open Access Journals (Sweden)

    Egwunatum Samuel

    2016-09-01

    Full Text Available Given the ability of a Building Information Model (BIM to serve as a multi-disciplinary data repository, this paper seeks to explore and exploit the sustainability value of Building Information Modelling/models in delivering buildings that require less energy for their operation, emit less CO2 and at the same time provide a comfortable living environment for their occupants. This objective was achieved by a critical and extensive review of the literature covering: (1 building energy consumption, (2 building energy performance and analysis, and (3 building information modeling and energy assessment. The literature cited in this paper showed that linking an energy analysis tool with a BIM model helped project design teams to predict and create optimized energy consumption. To validate this finding, an in-depth analysis was carried out on a completed BIM integrated construction project using the Arboleda Project in the Dominican Republic. The findings showed that the BIM-based energy analysis helped the design team achieve the world’s first 103% positive energy building. From the research findings, the paper concludes that linking an energy analysis tool with a BIM model helps to expedite the energy analysis process, provide more detailed and accurate results as well as deliver energy-efficient buildings. The study further recommends that the adoption of a level 2 BIM and the integration of BIM in energy optimization analyse should be made compulsory for all projects irrespective of the method of procurement (government-funded or otherwise or its size.

  2. Optimizing Existing Multistory Building Designs towards Net-Zero Energy

    Directory of Open Access Journals (Sweden)

    Mohammad Y. AbuGrain

    2017-03-01

    Full Text Available Recent global developments in awareness and concerns about environmental problems have led to reconsidering built environment approaches and construction techniques. One of the alternatives is the principle of low/zero-energy buildings. This study investigates the potentials of energy savings in an existing multi-story building in the Mediterranean region in order to achieve net-zero energy as a solution to increasing fossil fuel prices. The Colored building at the Faculty of Architecture, Eastern Mediterranean University, Cyprus was chosen as a target of this study to be investigated and analyzed in order to know how energy efficiency strategies could be applied to the building to reduce annual energy consumption. Since this research objective is to develop a strategy to achieve net-zero energy in existing buildings, case study and problem solving methodologies were applied in this research in order to evaluate the building design in a qualitative manner through observations, in addition to a quantitative method through an energy modeling simulation to achieve desirable results which address the problems. After optimizing the building energy performance, an alternative energy simulation was made of the building in order to make an energy comparison analysis, which leads to reliable conclusions. These methodologies and the strategies used in this research can be applied to similar buildings in order to achieve net-zero energy goals.

  3. Building Information Modeling (BIM) Primer. Report 1: Facility Life-Cycle Process and Technology Innovation

    Science.gov (United States)

    2012-08-01

    design. Negatives of the software, Melendez said, was that it was too time consuming and demanding at the initial design phase. Also, her learning...manage the building using BIM as part of the WO process. ii. Today it is preferred that installations prepare for delivery of BIM and have inplace...offices, a theater, exhibition hall, and cafe Project Team Urban Design Group, Hathaway Dinwiddie, TBD Consultants, IBE Consulting Engineers, KPFF

  4. Improving Building Performance through Integrating Constructability in the Design Process

    OpenAIRE

    Ezzat Othman, Ayman Ahmed

    2011-01-01

    The traditional procurment approaches commonly adopted in construction projects and the involvement of multitude of various project participants with diverse objectives, skills and interests tended to separate design from construction.This separation obstructs contractors from providing designers with construction feedback and suggestions for design improvement, which ultimately hampers the improvement of building performance. Because of the importance of the design phase and the vit...

  5. The Innovative Bike Conceptual Design by Using Modified Functional Element Design Method

    Directory of Open Access Journals (Sweden)

    Nien-Te Liu

    2016-11-01

    Full Text Available The purpose of the study is to propose a new design process by modifying functional element design approach which can commence a large amount of innovative concepts within a short period of time. Firstly, the original creative functional elements design method is analyzed and the drawbacks are discussed. Then, the modified is proposed and is divided into 6 steps. The creative functional element representations, generalization, specialization, and particularization are used in this method. Every step is described clearly, and users could design by following the process easily. In this paper, a clear and accurate design process is proposed based on the creative functional element design method. By following this method, a lot of innovative bicycles will be created quickly.

  6. Behavioral Design Teams: The Next Frontier in Clinical Delivery Innovation?

    Science.gov (United States)

    Robertson, Ted; Darling, Matthew; Leifer, Jennifer; Footer, Owen; Gordski, Dani

    2017-11-01

    A deep understanding of human behavior is critical to designing effective health care delivery models, tools, and processes. Currently, however, few mechanisms exist to systematically apply insights about human behavior to improve health outcomes. Behavioral design teams (BDTs) are a successful model for applying behavioral insights within an organization. Already operational within government, this model can be adapted to function in a health care setting. To explore how BDTs could be applied to clinical care delivery and review models for integrating these teams within health care organizations. Interviews with experts in clinical delivery innovation and applied behavioral science, as well as leaders of existing government BDTs. BDTs are most effective when they enjoy top-level executive support, are co-led by a domain expert and behavioral scientist, collaborate closely with key staff and departments, have access to data and IT support, and operate a portfolio of projects. BDTs could be embedded in health care organizations in multiple ways, including in or just below the CEO’s office, within a quality improvement unit, or within an internal innovation center. When running a portfolio, BDTs achieve a greater number and diversity of insights at lower costs. They also become a platform for strategic learning and scaling.

  7. MODELING AND DESIGN OF INNOVATIVE SMALL DIAMETER GRAVITY SEWERAGE SYSTEM

    Directory of Open Access Journals (Sweden)

    Tadeusz Nawrot

    2017-05-01

    Full Text Available The article presents modern methods of hydraulic design of an innovative small diameter gravity sewerage system. In this system, domestic wastewater is preliminary treated in septic tanks equipped with outlet filters, thus the effluent features are similar to those of clear water. Innovative non-return valves at the outlets eliminate introduction of air to the system and thus the flows can be treated as one-phase ones. Computer codes EPANET 2 and SWMM 5.0 were applied and compared. Two flow schemes typical for the sewerage system were implemented in EPANET 2, and the third - in a slightly modified SWMM 5.0. Simulation results were validated on empirical data obtained on a laboratory physical model, consisting of four tanks of minimum volumes 600 dm3 each, connecting PE pipelines of diameters 25 mm and 36 mm and relevant sanitary fittings. Water inflows, typical for domestic wastewater outflows from single homesteads, were provided by a pump. Water flows were measured using water meters with pulse outputs, and water levels in tanks by pressure transducers. Hydraulic characteristics of filters and non-return valves were provided. Simulation results showed good agreement with the empirical data. Ranges of values of design parameters, needed for successful application of both codes, were established and discussed.

  8. Beyond agricultural innovation systems? Exploring an agricultural innovation ecosystems approach for niche design and development in sustainability transitions

    NARCIS (Netherlands)

    Pigford, Ashlee Ann E.; Hickey, Gordon M.; Klerkx, Laurens

    2018-01-01

    Well-designed and supported innovation niches may facilitate transitions towards sustainable agricultural futures, which may follow different approaches and paradigms such as agroecology, local place-based food systems, vertical farming, bioeconomy, urban agriculture, and smart farming or digital

  9. Streamlining the Design-to-Build Transition with Build-Optimization Software Tools.

    Science.gov (United States)

    Oberortner, Ernst; Cheng, Jan-Fang; Hillson, Nathan J; Deutsch, Samuel

    2017-03-17

    Scaling-up capabilities for the design, build, and test of synthetic biology constructs holds great promise for the development of new applications in fuels, chemical production, or cellular-behavior engineering. Construct design is an essential component in this process; however, not every designed DNA sequence can be readily manufactured, even using state-of-the-art DNA synthesis methods. Current biological computer-aided design and manufacture tools (bioCAD/CAM) do not adequately consider the limitations of DNA synthesis technologies when generating their outputs. Designed sequences that violate DNA synthesis constraints may require substantial sequence redesign or lead to price-premiums and temporal delays, which adversely impact the efficiency of the DNA manufacturing process. We have developed a suite of build-optimization software tools (BOOST) to streamline the design-build transition in synthetic biology engineering workflows. BOOST incorporates knowledge of DNA synthesis success determinants into the design process to output ready-to-build sequences, preempting the need for sequence redesign. The BOOST web application is available at https://boost.jgi.doe.gov and its Application Program Interfaces (API) enable integration into automated, customized DNA design processes. The herein presented results highlight the effectiveness of BOOST in reducing DNA synthesis costs and timelines.

  10. Hygrothermal Simulation: A Tool for Building Envelope Design Analysis

    Science.gov (United States)

    Samuel V. Glass; Anton TenWolde; Samuel L. Zelinka

    2013-01-01

    Is it possible to gauge the risk of moisture problems while designing the building envelope? This article provides a brief introduction to computer-based hygrothermal (heat and moisture) simulation, shows how simulation can be useful as a design tool, and points out a number of im-portant considerations regarding model inputs and limita-tions. Hygrothermal simulation...

  11. Design-Based Innovation for Manufacturing Firm Success in High-Cost Operating Environments

    Directory of Open Access Journals (Sweden)

    Göran Roos

    The paper concludes that the design-based innovation paradigm is increasingly important within the manufacturing industry, but that its benefit can only be maximized if it is integrated with the other three value-creating approaches to innovation.

  12. Status of innovative small and medium sized reactor designs 2005. Reactors with conventional refuelling schemes

    International Nuclear Information System (INIS)

    2006-03-01

    There is a renewed interest in Member States in the development and application of small and medium sized reactors (SMRs). In the near term, most new NPPs are likely to be evolutionary designs building on proven systems while incorporating technological advances and often the economics of scale, resulting from the reactor outputs of up to 1600 MW(e). For the longer term, the focus is on innovative designs aiming to provide increased benefits in the areas of safety and security, non-proliferation, waste management, resource utilization and economy, as well as to offer a variety of energy products and flexibility in design, siting and fuel cycle options. Many innovative designs are reactors within the small-to-medium size range, having an equivalent electric power less than 700 MW(e) or even less than 300 MW(e). The projected timelines of readiness for deployment are generally between 2010 and 2030. The objective of this report is to provide Member States, including those just considering the initiation of nuclear power programmes, and those already having practical experience in nuclear power, with a balanced and objective information on important development trends and objectives of innovative SMRs for a variety of uses, on the achieved state-of-the-art in design and technology development for such reactors and on their design and regulatory status. The report is intended for many categories of stakeholders, including regulators, electricity producers, designers, non-electrical producers and policy makers. The main chapters of this report, addressed to all abovementioned groups of stakeholders, provide a summary of major specifications, applications and user-related special features of innovative SMRs, outline the achieved design and regulatory status and its progress since previous IAEA publications, review targeted deployment dates, fuel cycle options, design approaches used to meet design objectives in specific subject areas, enabling technologies and current

  13. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    Energy Technology Data Exchange (ETDEWEB)

    CROWE, R.D.

    1999-09-09

    This document provides the detailed accident analysis to support ''HNF-3553, Spent Nuclear Fuel Project Final Safety, Analysis Report, Annex A,'' ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  14. DESIGN OF BUILDING AUTOMATION BASED ON PROFIBUS-DP NETWORK

    Directory of Open Access Journals (Sweden)

    Cemal YILMAZ

    2006-02-01

    Full Text Available In this study, a building automation has been designed by using the Profibus DP (Process Field Bus- Decentralized Periphery network. In the study; fire alarm, thief alarm, lighting, power, humidity and temperature control have been implemented. The data from building has been transmitted to the Profibus-DP network via control point located on the flats. The data taken from the building has been collected in the main control unit to achieve overall control of the system. The work has provided an optimum efficiency in energy consumption, control of power, security, temperature and humidity.

  15. Neutronics conceptual design of the innovative research reactor core using uranium molybdenum fuel

    International Nuclear Information System (INIS)

    Tukiran S; Surian Pinem; Tagor MS; Lily S; Jati Susilo

    2012-01-01

    The multipurpose of research reactor utilization make many countries build the new research reactor. Trend of this reactor for this moment is multipurpose reactor type with a compact core to get high neutron flux at the low or medium level of power. The research newest. Reactor in Indonesia right now is already 25 year old. Therefore, it is needed to design a new research reactor, called innovative research reactor (IRR) and then as an alternative to replace the old research reactor. The aim of this research is to get the optimal configuration of equilibrium core with the acceptance criteria are minimum thermal neutron flux is 2.5E14 n/cm 2 s at the power level of 20 MW (minimum), length of cycle of more than 40 days, and the most efficient of using fuel in the core. Neutronics design has been performed for new fuel of U-9Mo-AI with various fuel density and reflector. Design calculation has been performed using WIMSD-5B and BATAN-FUEL computer codes. The calculation result of the conceptual design shows four core configurations namely 5x5, 5x7, 6x5 and 6x6. The optimalization result for equilibrium core of innovative research reactor is the 5x5 configuration with 450 gU fuel loading, berilium reflector, maximum thermal neutron flux at reflector is 3.33E14 n/cm 2 sand length of cycle is 57 days is the most optimal of IRR. (author)

  16. Design, analysis and application of innovative composite PR connections between steel beams and CFT columns

    International Nuclear Information System (INIS)

    Hu, Jong Wan; Leon, Roberto T; Choi, Eunsoo

    2011-01-01

    In this research, three structural design concepts are integrated: the use of composite concrete-filled tube (CFT) columns, the use of partially restrained (PR) connections and the introduction of innovative materials (shape memory alloys) in the connection design. These concepts are used to enhance the robustness and performance of composite-special moment frames. These innovative connections intend to exploit the recentering properties of super-elastic SMA tension bars, the energy dissipation capacity of low-carbon steel bars and the toughness of CFT columns. PR-CFT connection prototypes were designed based on a hierarchy of strength models for each connection component. Simplified user joint elements based on the mechanical modeling approach were formulated in an effort to simulate the realistic behavior of bolted connections. The application of new connections to low-rise PR composite frames is illustrated by designing four buildings in both 2D and 3D for the western US region. The performance of these composite frames was compared with those with conventional welded frames in terms of strength, ductility and recentering behavior. In all three areas, frames with the PR composite connections showed superior performance. This is due primarily to the capability of this system to redistribute inter-story drift more evenly through the height of the frame

  17. Function combined method for design innovation of children's bike

    Science.gov (United States)

    Wu, Xiaoli; Qiu, Tingting; Chen, Huijuan

    2013-03-01

    As children mature, bike products for children in the market develop at the same time, and the conditions are frequently updated. Certain problems occur when using a bike, such as cycle overlapping, repeating function, and short life cycle, which go against the principles of energy conservation and the environmental protection intensive design concept. In this paper, a rational multi-function method of design through functional superposition, transformation, and technical implementation is proposed. An organic combination of frog-style scooter and children's tricycle is developed using the multi-function method. From the ergonomic perspective, the paper elaborates on the body size of children aged 5 to 12 and effectively extracts data for a multi-function children's bike, which can be used for gliding and riding. By inverting the body, parts can be interchanged between the handles and the pedals of the bike. Finally, the paper provides a detailed analysis of the components and structural design, body material, and processing technology of the bike. The study of Industrial Product Innovation Design provides an effective design method to solve the bicycle problems, extends the function problems, improves the product market situation, and enhances the energy saving feature while implementing intensive product development effectively at the same time.

  18. Designing domestic buildings for future summers: Attitudes and opinions of building professionals

    International Nuclear Information System (INIS)

    Gul, Mehreen S.; Menzies, Gillian F.

    2012-01-01

    A changing climate will produce summertime overheating where conventional domestic building design approaches do not adequately address future warming risk. This risk cannot be fully identified and avoided unless future climate information and building related adaptation measures are considered. The Low Carbon Futures project is developing a tool that uses UKCP09 climate projections input to predict dwelling overheating risks. To enhance the usefulness of this tool for the building industry, and to better understand current building design processes, interviews were conducted with building professionals, allowing industry preferences for the tool to be sought and to provide clearer indications of proposed outcomes. This paper examines results from a questionnaire, focus groups and semi-structured interviews with building industry professionals. The research shows that the housing industry maintains adherence to traditional designing methods where overheating, whether current or future, is not considered a serious concern. No design stage detailed overheating assessments are currently undertaken to reduce the UK's increased room air-conditioner sales, despite drives for low energy/zero carbon homes. The collated feedback will help tailor the tool and its eventual outputs, with this paper attempting to converge on a set of recommendations for low carbon dwelling design with reduced overheating risk. - Highlights: ► Interviews to gauge attitudes of building professionals towards future warming. ► Client requirements, capital costs and regulations take priority in typical practice. ► No actions are currently taken to prevent overheating risks in the housing sector. ► Overheating risks in housing can be tackled by the use of dynamic modelling. ► The LCF tool further helps to adapt a dwelling to reduce future overheating risks.

  19. Design and performance of a novel innovative roofing system for tropical landed houses

    International Nuclear Information System (INIS)

    Al-Obaidi, Karam M.; Ismail, Mazran; Abdul Rahman, Abdul Malek

    2014-01-01

    Highlights: • Constructing a new design of sustainable roofing systems. • An innovative roofing system (IRS) for tropical landed houses is proposed. • Separate solar heat from useful natural light by physical form. • The IRS can maintain an illuminance level of approximately 86–100% below 2000 lux. • The IRS can reduce the attic air temperature by 5.4 °C and the indoor air temperature by 2.1 °C. - Abstract: An innovative roofing system (IRS) is designed to deliver an abundant and uniform amount of cool natural light from the roof with reduced heat gain effect for tropical residential buildings (3 m height) in Malaysia. Studies revealed that several passive and active solar techniques can be integrated to form a roofing system to separate solar heat from useful natural light at the attic zone before heat reaches the occupied space. The IRS design is specified and proposed by using glazing technology (polycarbonate), pigment technique (reflective and radiative), as well as ventilation process (hybrid turbine ventilator) applied at the attic zone to represent a new model of sustainable roofing design. The aim of this research is to demonstrate the effectiveness of the design concept without the need for any chemical, complex, or expensive solar design techniques. The methodology was conducted on a series of field studies in a standard room model at Universiti Sains Malaysia. Three different roofing systems are investigated to identify the IRS performance in both dark and daylight conditions to determine the effect of natural light on the indoor environment. The outcomes of the design show that the IRS was able to reduce the indoor air temperature compared with conventional roofing system by approximately 2.1 °C under daylight condition. Results showed that the difference in the IRS (daylight–dark) condition was 0.31 °C compared to that in the conventional roofing system at 0.8 °C. Furthermore, the level of mean radiant temperature compared with

  20. Zero Energy BuildingsDesign Principles and Built Examples

    DEFF Research Database (Denmark)

    Designing a zero energy building is a complicated task, and in order to achieve good results it is necessary to include knowledge from a range of sources. Therefore, cooperation is required between different professions and between generalists and specialists from the very beginning of the process...... knowledge must be acquired, depending on the project in question. Through a cross-disciplinary approach to architecture and building design, and based on an integrated design process, this publication will: • introduce a number of design strategies and technologies which are particularly important...... for the development of zero energy houses. These strategies and technologies are illustrated through simple design principles and built examples • identify technical and architectural potentials and challenges related to design strategies of crucial importance to the development of zero energy houses • identify...

  1. Assessment of seismic design response factors of concrete wall buildings

    Science.gov (United States)

    Mwafy, Aman

    2011-03-01

    To verify the seismic design response factors of high-rise buildings, five reference structures, varying in height from 20- to 60-stories, were selected and designed according to modern design codes to represent a wide range of concrete wall structures. Verified fiber-based analytical models for inelastic simulation were developed, considering the geometric nonlinearity and material inelasticity of the structural members. The ground motion uncertainty was accounted for by employing 20 earthquake records representing two seismic scenarios, consistent with the latest understanding of the tectonic setting and seismicity of the selected reference region (UAE). A large number of Inelastic Pushover Analyses (IPAs) and Incremental Dynamic Collapse Analyses (IDCAs) were deployed for the reference structures to estimate the seismic design response factors. It is concluded that the factors adopted by the design code are adequately conservative. The results of this systematic assessment of seismic design response factors apply to a wide variety of contemporary concrete wall buildings with various characteristics.

  2. Design and Implementation of an Innovative Residential PV System

    Science.gov (United States)

    Najm, Elie Michel

    This work focuses on the design and implementation of an innovative residential PV system. In chapter one, after an introduction related to the rapid growth of solar systems' installations, the most commonly used state of the art solar power electronics' configurations are discussed, which leads to introducing the proposed DC/DC parallel configuration. The advantages and disadvantages of each of the power electronics' configurations are deliberated. The scope of work in the power electronics is defined in this chapter to be related to the panel side DC/DC converter. System integration and mechanical proposals are also within the scope of work and are discussed in later chapters. Operation principle of a novel low cost PV converter is proposed in chapter 2. The proposal is based on an innovative, simplified analog implementation of a master/slave methodology resulting in an efficient, soft-switched interleaved variable frequency flybacks, operating in the boundary conduction mode (BCM). The scheme concept and circuit configuration, operation principle and theoretical waveforms, design equations, and design considerations are presented. Furthermore, design examples are also given, illustrating the significance of the newly derived frequency equation for flybacks operating in BCM. In chapters 3, 4, and 5, the design implementation and optimization of the novel DC/DC converter illustrated in chapter 2 are discussed. In chapter 3, a detailed variable frequency BCM flyback design model leading to optimizing the component selections and transformer design, detailed in chapter 4, is presented. Furthermore, in chapter 4, the method enabling the use of lower voltage rating switching devices is also discussed. In chapter 5, circuitry related to Start-UP, drive for the main switching devices, zero-voltage-switching (ZVS) as well as turn OFF soft switching and interleaving control are fully detailed. The experimental results of the proposed DC/DC converter are presented in

  3. Design for a mashup of Wordpress and Google Maps API : case: digital service innovation for Chinese restaurants management in Finland

    OpenAIRE

    Weng, Shiying

    2009-01-01

    This thesis is based on a digital service innovation project for Chinese Restaurants in Finland using Wordpress and Google Maps API to build a dynamic website. The purpose of this thesis is to make a primary design for the project with a mashup of Wordpress and Google Maps API. Mashup technology is widely used in website development during recent years. It enables an application or a web page to combine multiple data sources. Besides, as Wordpress is applied as a content management system...

  4. CISBAT 2007 - Design and renovation of building envelopes (bioclimatic architecture)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This is the second part of the proceedings of the 2007 CISBAT conference on Renewables in a changing climate, held in Lausanne, Switzerland. On the subject of sustainable building envelopes the following oral contributions are summarised: 'Flexible photovoltaics integrated in transparent membrane and pneumatic foil constructions', 'Development of a numerical thermal model for double skin facades', 'Thermal performance analysis for an electrochromic vacuum glazing with low emittance coatings', 'Challenging the public building sector: optimization of energy performance by sustainable strategies', 'Simulation of the thermal performance of a climate adaptive skin', 'Possibilities for upgrading prefabricated concrete building envelopes', 'Experimental study of airflow and heat transfer in a double skin facade with blinds', 'Energy efficiency of a glazing system - Case study: a dynamic glazing and double skin facades - the use of venetian blinds and night ventilation for saving energy on mediterranean climate'. Poster-sessions on the subject include 'Adaptive building envelopes design ', 'GRC facade panels in Brazil', 'Solar absorptance of building opaque surfaces', 'Evaluating the thermal behavior of exterior walls (in residential buildings of hot-dry climate of Yazd)', 'Energy performance of buildings and local energy policy: the case of new residential buildings in Greve in Chianti (Firenze)', 'Space heating and domestic hot water energy demand in high-level-insulation multi-storey buildings in Tuscany (Italy)', 'Is 2000 W society possible, affordable, and socially acceptable for the Vaud existing school building?', 'Development of simplified method for measuring solar shading performance of windows', 'Studies of ecological architecture in China's Loess Plateau region', 'Contemporary mud

  5. Nuclear component design ontology building based on ASME codes

    International Nuclear Information System (INIS)

    Bao Shiyi; Zhou Yu; He Shuyan

    2005-01-01

    The adoption of ontology analysis in the study of concept knowledge acquisition and representation for the nuclear component design process based on computer-supported cooperative work (CSCW) makes it possible to share and reuse numerous concept knowledge of multi-disciplinary domains. A practical ontology building method is accordingly proposed based on Protege knowledge model in combination with both top-down and bottom-up approaches together with Formal Concept Analysis (FCA). FCA exhibits its advantages in the way it helps establish and improve taxonomic hierarchy of concepts and resolve concept conflict occurred in modeling multi-disciplinary domains. With Protege-3.0 as the ontology building tool, a nuclear component design ontology based ASME codes is developed by utilizing the ontology building method. The ontology serves as the basis to realize concept knowledge sharing and reusing of nuclear component design. (authors)

  6. Research on green building design based on ecological concept

    Directory of Open Access Journals (Sweden)

    Zhang Ping Qing

    2016-01-01

    Full Text Available At present, the protection of the ecological environment and the promotion of green building has been recognized and widely promoted.With the rapid development of the construction industry, Architecture design will inevitably require the resentation of its unique form and charm to reflect the ecological concept and ecological culture, because of the unique nature of the art and the particularity of the environment. To establish the ecological concept of green building design and vigorously develop the green green building has a complementary role to alleviate the pressure on resources,and to speed up the eco city planning design, and to realize the sustainable development of the city, and to protect the urban ecological environmental.

  7. Safety design integrated in the Building Delivery System

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten

    2012-01-01

    phases of the building delivery system by using the principle of the lean construction modelling. The method for the research was to go through the lean construction building delivery system step by step and create a normative description of what to do, when to do and how to do to fully integration...... of safety in each process. The group of participants who created the description had a high experience in a combination of research, safety and health in general and especial in construction and knowledge of the lean construction processes both from the clients perspective as well as from the designers...... and the consultants. The result is a concept and guideline including control schemes for how to integrate safety design in the lean construction building delivery system including what to do and when. The concept has been tested in an educational context and found useful by the designers. The practical value...

  8. I’m Discovering Conics and Designing Buildings with Conics

    Directory of Open Access Journals (Sweden)

    Serkan KULOGLU

    2015-01-01

    Full Text Available There are three stages in this activity. At the first stage, it is provided that gifted students learn the subject of conic through discovery learning method. By this way, the formation of misconceptions that students frequently encounter in mathematics has been prevented. At the second stage, gifted students have been asked to draw the conical objects which they encounter in their daily life. Thus, it has contributed to the development of gifted students’ creativity. At the third stage, gifted students have been asked to design a buildings consisting of conics. Moreover, gifted students have been informed that the buildings which they have been asked to design, would be evaluated according to the criteria which set before. And then, the building design model has been done by gifted students.

  9. Innovative Design and Performance Evaluation of Bionic Imprinting Toothed Wheel.

    Science.gov (United States)

    Zhang, Zhihong; Wang, Xiaoyang; Tong, Jin; Stephen, Carr

    2018-01-01

    A highly efficient soil-burrowing dung beetle possesses an intricate outer contour curve on its foreleg end-tooth. This study was carried out based on evidence that this special outer contour curve has the potential of reducing soil penetration resistance and could enhance soil-burrowing efficiency. A toothed wheel is a typical agricultural implement for soil imprinting, to increase its working efficiency; the approach of the bionic geometrical structure was utilized to optimize the innovative shape of imprinting toothed wheel. Characteristics in the dung beetle's foreleg end-tooth were extracted and studied by the edge detection technique. Then, this special outer contour curve was modeled by a nine-order polynomial function and used for the innovative design of imprinting the tooth's cutting edge. Both the conventional and bionic teeth were manufactured, and traction tests in a soil bin were conducted. Taking required draft force and volume of imprinted microbasin as the evaluating indexes, operating efficiency and quality of different toothed wheels were compared and investigated. Results indicate that compared with the conventional toothed wheel, a bionic toothed wheel possesses a better forward resistance reduction property against soil and, meanwhile, can enhance the quality of soil imprinting by increasing the volume of the created micro-basin.

  10. Capacity Building of Teachers through Distance Mode Using Teleconferencing as an Innovative Tool

    Science.gov (United States)

    Ranjan Panigrahi, Manas

    2012-01-01

    Sarva Shiksha Abhiyan (SSA) is a national programme to the goals of Universalization of Elementary Education in India. Distance Education Programme (DEP) plays a major role in providing technical support to the states in building capacity among institutions and people at national, state, district and sub-district levels to design, develop, produce…

  11. Build It and They Will Come: Innovative Facilities Help Colleges Meet Academic Goals

    Science.gov (United States)

    Joch, Alan

    2008-01-01

    Lone Star College had a unique opportunity in 2000 when it began planning its new CyFair campus in suburban Houston. The school wasn't retrofitting existing buildings or contending with entrenched attitudes about what type of physical environment best supported learning. So when it designed its sprawling 550,000-square-foot campus, paid for with…

  12. MANAGING THE BUILDING DESIGN PROCESS FOR SUSTAINABILTY AND IMPROVED QUALITY

    Directory of Open Access Journals (Sweden)

    Sunday Bobadoye

    2006-01-01

    Full Text Available The essence of building design process and management for building sustainability in the creation and maintenance of a qualitative architectural product is investigated in this paper. The design process, concept of building sustainability and particularly the quality of the built environment are discussed. Akure, a state capital in Nigeria was used as a case study. The principles and indicators for sustainability of buildings and its implications on the quality of the environment are examined in details. Survey findings include the views of the professionals on the clients, perception on the design process as well as management of projects, and the implications on the quality of the ensuring products and the city’s environment. The data were factor analyzed using varimax rotation criterion (with Kaiser Normalization. The results revealed that five factors were effective, with one of them exhibiting the greatest variability and individual differences. The variables that loaded on this factor were really the aspects of the process and management relating to the clients. The findings also revealed the professionals’ wrong attitude towards design process as shown with a very high degree of variability in the study. The paper concludes by recommending the enactment and enforcement of relevant policies with adequate education of the people and the involvement of all the stakeholders in the management of building projects and environmental programmes for the realization of a qualitative architectural product.

  13. The RENUE resource centre. Design study of building-integrated PV in a zero-carbon exhibition building

    Energy Technology Data Exchange (ETDEWEB)

    Webb, R.

    2001-07-01

    Studies at the RENUE building in London are described. The RENUE project is a renewable energy and urban sustainability demonstration of comfortable and elegant buildings which are zero-carbon users. Building-Integrated Photovoltaic (BIPV) systems are a factor in the zero-CO{sub 2} building. The building should be of special interest to protagonists of renewable energy, building designers and the PV industry.

  14. Bridging the gap between building science and design studios

    Energy Technology Data Exchange (ETDEWEB)

    Papamichael, Konstantinos; Pal, Vineeta

    2002-02-06

    Design studios and building science courses have been conducted independent of each other, mainly due to a lack of tools that allow quick and easy consideration of building science criteria, such as comfort and energy requirements, during the design process. Existing tools are not user-friendly and their use requires significant effort in gaining familiarity with the input requirements, understanding the modeling assumptions and interpreting the output. This paper is about the Building Design Advisor (BDA), an evolving computer-based tool intended to bridge the gap between design studios and building science considerations by addressing the above-mentioned limitations of existing tools. BDA allows automatic preparation of input files to multiple simulation tools while the user is working in a CAD environment. BDA automatically activates the relevant simulation tools when the user selects performance parameters to be computed and provides the results in a graphical form, allowing comparison of multiple design options with respect to multiple performance criteria. The paper includes considerations for the use of the BDA in the design studio and ends with a description of the current development efforts and future plans.

  15. Structure design of an innovative adaptive variable camber wing

    Directory of Open Access Journals (Sweden)

    Zhao An-Min

    2018-01-01

    Full Text Available In this paper, an innovative double rib sheet structure is proposed, which can replace the traditional rigid hinge joint with the surface contact. On the one hand, the variable camber wing structural design not only can improve the capacity to sustain more load but also will not increase the overall weight of the wing. On the other hand, it is a simple mechanical structure design to achieve the total wing camber change. Then the numerical simulation results show that the maximum stress at the connect of the wing rib is 88.2MPa, and the double ribs sheet engineering design meet the structural strength requirements. In addition, to make a fair comparison, the parameters of variable camber are fully referenced to the Talon Unmanned Aerial Vehicle (UAV. The results reveal that the total variable camber wing can further enhance aircraft flight efficiency by 29.4%. The design of the whole variable camber wing structure proposed in this paper has high engineering value and feasibility.

  16. Optimal design of passive containment cooling system for innovative PWR

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Huiun; Lee, Sang Won; Kim, Hangon [Central Research Institute, Korea Hydro and Nuclear Power, Ltd., Daejeon (Korea, Republic of)

    2017-08-15

    Using the Generation of Thermal-Hydraulic Information for Containments (GOTHIC) code, thermal-hydraulic phenomena that occur inside the containment have been investigated, along with the preliminary design of the passive containment cooling system (PCCS) of an innovative pressurized water reactor (PWR). A GOTHIC containment model was constructed with reference to the design data of the Advanced Power Reactor 1400, and report related PCCS. The effects of the design parameters were evaluated for passive containment cooling tank (PCCT) geometry, PCCS heat exchanger (PCCX) location, and surface area. The analyzed results, obtained using the single PCCT, showed that repressurization and reheating phenomena had occurred. To resolve these problems, a coupled PCCT concept was suggested and was found to continually decrease the containment pressure and temperature without repressurization and reheating. If the installation level of the PCCX is higher than that of the PCCT, it may affect the PCCS performance. Additionally, it was confirmed that various means of increasing the external surface area of the PCCX, such as fins, could help improve the energy removal performance of the PCCS. To improve the PCCS design and investigate its performance, further studies are needed.

  17. Optimal design of passive containment cooling system for innovative PWR

    Directory of Open Access Journals (Sweden)

    Huiun Ha

    2017-08-01

    Full Text Available Using the Generation of Thermal-Hydraulic Information for Containments (GOTHIC code, thermal-hydraulic phenomena that occur inside the containment have been investigated, along with the preliminary design of the passive containment cooling system (PCCS of an innovative pressurized water reactor (PWR. A GOTHIC containment model was constructed with reference to the design data of the Advanced Power Reactor 1400, and report related PCCS. The effects of the design parameters were evaluated for passive containment cooling tank (PCCT geometry, PCCS heat exchanger (PCCX location, and surface area. The analyzed results, obtained using the single PCCT, showed that repressurization and reheating phenomena had occurred. To resolve these problems, a coupled PCCT concept was suggested and was found to continually decrease the containment pressure and temperature without repressurization and reheating. If the installation level of the PCCX is higher than that of the PCCT, it may affect the PCCS performance. Additionally, it was confirmed that various means of increasing the external surface area of the PCCX, such as fins, could help improve the energy removal performance of the PCCS. To improve the PCCS design and investigate its performance, further studies are needed.

  18. Optimal design of passive containment cooling system for innovative PWR

    International Nuclear Information System (INIS)

    Ha, Huiun; Lee, Sang Won; Kim, Hangon

    2017-01-01

    Using the Generation of Thermal-Hydraulic Information for Containments (GOTHIC) code, thermal-hydraulic phenomena that occur inside the containment have been investigated, along with the preliminary design of the passive containment cooling system (PCCS) of an innovative pressurized water reactor (PWR). A GOTHIC containment model was constructed with reference to the design data of the Advanced Power Reactor 1400, and report related PCCS. The effects of the design parameters were evaluated for passive containment cooling tank (PCCT) geometry, PCCS heat exchanger (PCCX) location, and surface area. The analyzed results, obtained using the single PCCT, showed that repressurization and reheating phenomena had occurred. To resolve these problems, a coupled PCCT concept was suggested and was found to continually decrease the containment pressure and temperature without repressurization and reheating. If the installation level of the PCCX is higher than that of the PCCT, it may affect the PCCS performance. Additionally, it was confirmed that various means of increasing the external surface area of the PCCX, such as fins, could help improve the energy removal performance of the PCCS. To improve the PCCS design and investigate its performance, further studies are needed

  19. Building America Top Innovations 2014 Profile: ASHRAE Standard 62.2. Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-11-01

    This 2014 Top Innovations profile describes Building America research and support in developing and gaining adoption of ASHRAE 62.2, a residential ventilation standard that is critical to transforming the U.S. housing industry to high-performance homes.

  20. The Adoption of Ergonomic Innovations for Injury Prevention : Examples from the building construction and health care industries

    OpenAIRE

    Glimskär, Bo

    2014-01-01

    A good work environment is important for the individual, for industry and for society. The work environment research has, predominantly, targeted identification of problems and the measurement of the size of these problems. Innovations to reduce the incidence of musculoskeletal disorder, MSD, have been introduced in different branches of industry, but with limited success. Few of the ergonomic innovations developed for the building and construction industry have reached a sufficient level of ...

  1. Innovative hand exoskeleton design for extravehicular activities in space

    CERN Document Server

    Freni, Pierluigi; Randazzo, Luca; Ariano, Paolo

    2014-01-01

    Environmental conditions and pressurized spacesuits expose astronauts to problems of fatigue during lengthy extravehicular activities, with adverse impacts especially on the dexterity, force and endurance of the hands and arms. A state-of-the-art exploration in the field of hand exoskeletons revealed that available products are unsuitable for space applications because of their bulkiness and mass. This book proposes a novel approach to the development of hand exoskeletons, based on an innovative soft robotics concept that relies on the exploitation of electroactive polymers operating as sensors and actuators, on a combination of electromyography and mechanomyography for detection of the user’s will and on neural networks for control. The result is a design that should enhance astronauts’ performance during extravehicular activities. In summary, the advantages of the described approach are a low-weight, high-flexibility exoskeleton that allows for dexterity and compliance with the user’s will.

  2. Effect of structural design on traffic-induced building vibrations

    DEFF Research Database (Denmark)

    Persson, Peter; Andersen, Lars Vabbersgaard; Persson, Kent

    2017-01-01

    Population growth and urbanization results in densified cities, where new buildings are being built closer to existing vibration sources such as road-, tram- and rail traffic. In addition, new transportation systems are constructed closer to existing buildings. Potential disturbing vibrations...... are one issue to consider in planning urban environment and densification of cities. Vibrations can be disturbing for humans but also for sensitive equipment in, for example, hospitals. In determining the risk for disturbing vibrations, the distance between the source and the receiver, the ground...... properties, and type and size of the building are governing factors. In the paper, a study is presented aiming at investigating the influence of various parameters of the building's structural design on vibration levels in the structure caused by ground surface loads, e.g. traffic. Parameters studied...

  3. An Examination of the Performance Based Building Code on the Design of a Commercial Building

    Directory of Open Access Journals (Sweden)

    John Greenwood

    2012-11-01

    Full Text Available The Building Code of Australia (BCA is the principal code under which building approvals in Australia are assessed. The BCA adopted performance-based solutions for building approvals in 1996. Performance-based codes are based upon a set of explicit objectives, stated in terms of a hierarchy of requirements beginning with key general objectives. With this in mind, the research presented in this paper aims to analyse the impact of the introduction of the performance-based code within Western Australia to gauge the effect and usefulness of alternative design solutions in commercial construction using a case study project. The research revealed that there are several advantages to the use of alternative designs and that all parties, in general, are in favour of the performance-based building code of Australia. It is suggested that change in the assessment process to streamline the alternative design path is needed for the greater use of the performance-based alternative. With appropriate quality control measures, minor variations to the deemed-to-satisfy provisions could easily be managed by the current and future building surveying profession.

  4. Design Solutions for Sustainable Construction of Pre Engineered Steel Buildings

    Directory of Open Access Journals (Sweden)

    Muhammad Umair Saleem

    2018-05-01

    Full Text Available Sustainable construction of ecofriendly infrastructure has been the priority of worldwide researchers. The induction of modern technology in the steel manufacturing industry has enabled designers to get the desired control over the steel section shapes and profiles resulting in efficient use of construction material and manufacturing energy required to produce these materials. The current research study is focused on the optimization of steel building costs with the use of pre-engineered building construction technology. Construction of conventional steel buildings (CSB incorporates the use of hot rolled sections, which have uniform cross-section throughout the length. However, pre-engineered steel buildings (PEB utilize steel sections, which are tailored and profiled based on the required loading effects. In this research study, the performance of PEB steel frames in terms of optimum use of steel sections and its comparison with the conventional steel building is presented in detail. A series of PEB and CSB steel frames is selected and subjected to various loading conditions. Frames were analyzed using Finite Element Based analysis tool and design was performed using American Institute of Steel Construction design specifications. Comparison of the frames has been established in terms of frame weights, lateral displacements (sway and vertical displacements (deflection of the frames. The results have clearly indicated that PEB steel frames are not only the most economical solution due to lesser weight of construction but also have shown better performance compared to CSB frames.

  5. BARRIER DESIGN STRATEGIES TO CONTROL NOISE INGRESS INTO DOMESTIC BUILDINGS

    Directory of Open Access Journals (Sweden)

    Christina E. Mediastika

    2003-01-01

    Full Text Available Noise source for buildings adjacent to streets is traffic-generated predominantly. Where people are mostly spend their time indoors, it is important for buildings to have screening or blocking to control noise intrusion into living spaces. But this blocking should also permit airflow. This is important for middle to low-cost domestic buildings, which do not employ conditioned ventilation. A common feature of Indonesian buildings, fence, is studied to perform noise barrier. The fence -a barrier to be- should obey three factors: position, dimension, and material. All these three factors were studied to seek compromised design for acoustic performance and natural ventilation purpose. Domestic building situated in the urban area of Yogyakarta was studying to see the most possible design of the barrier to be. There are two calculation methods employed to investigate the proposed design. The study shows that it is possible to gain minimum of 10 dB noise reduction by placing windows within the shadow effect of approximately 1.5 height fence-barrier.

  6. Building Design-led Ambidexterity in Big Companies

    OpenAIRE

    Stoimenova, Niya; de Lille, C.S.H.; Bohemia, E.; de Bont, C.; Svengren Holm, L.

    2017-01-01

    Organisational ambidexterity is considered a crucial capability for long term firm survival and development. However, adopting and successfully implementing it presents multiple challenges. Furthermore, despite being increasingly popular in the last two decades, the role design can play in achieving it is notably missing from the discussion. This paper analyses the attempts to accelerate the innovation pace of two large international companies in the consumer electronics and healthcare and ai...

  7. Design ampersand construction innovations of the defense waste processing facility

    International Nuclear Information System (INIS)

    McKibben, J.M.; Pair, C.R.; Bethmann, H.K.

    1990-01-01

    Construction of the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) is essentially complete. The facility is designed to convert high-level radioactive waste, now contained in large steel tanks as aqueous salts and sludge, into solid borosilicate glass in stainless steel canisters. All processing of the radioactive material and operations in a radioactive environment will be done remotely. The stringent requirements dictated by remote operation and new approaches to the glassification process led to the development of a number of first-of-a-kind pieces of equipment, new construction fabrication and erection techniques, and new applications of old techniques. The design features and construction methods used in the vitrification building and its equipment were to accomplish the objective of providing a state-of-the-art vitrification facility. 3 refs., 10 figs

  8. Improving Machining Accuracy of CNC Machines with Innovative Design Methods

    Science.gov (United States)

    Yemelyanov, N. V.; Yemelyanova, I. V.; Zubenko, V. L.

    2018-03-01

    The article considers achieving the machining accuracy of CNC machines by applying innovative methods in modelling and design of machining systems, drives and machine processes. The topological method of analysis involves visualizing the system as matrices of block graphs with a varying degree of detail between the upper and lower hierarchy levels. This approach combines the advantages of graph theory and the efficiency of decomposition methods, it also has visual clarity, which is inherent in both topological models and structural matrices, as well as the resiliency of linear algebra as part of the matrix-based research. The focus of the study is on the design of automated machine workstations, systems, machines and units, which can be broken into interrelated parts and presented as algebraic, topological and set-theoretical models. Every model can be transformed into a model of another type, and, as a result, can be interpreted as a system of linear and non-linear equations which solutions determine the system parameters. This paper analyses the dynamic parameters of the 1716PF4 machine at the stages of design and exploitation. Having researched the impact of the system dynamics on the component quality, the authors have developed a range of practical recommendations which have enabled one to reduce considerably the amplitude of relative motion, exclude some resonance zones within the spindle speed range of 0...6000 min-1 and improve machining accuracy.

  9. RESEARCH OF THE LEVEL OF THE INNOVATIVE DEVELOPMENT OF THE MACHINE BUILDING ENTERPRISES OF UKRAINE IN KHARKOV REGION

    Directory of Open Access Journals (Sweden)

    Kateryna Koliedina

    2015-11-01

    Full Text Available In today’s world of the science and new technologies development all the countries including Ukraine are entrusted with a task of refocusing on the innovative way of evolution. The level of innovativeness of the country depends on the development of enterprises in this regard since exactly the industrial enterprises are able to induce the innovative process and be a multiplier of other economic sectors. Thus it is expedient to re-equip the industry of the state and encourage exactly the high-tech branches thereof. In this regard the goal of this paper is to explore and assess the influence of the criteria of innovative activity of the industrial enterprises on the level of the innovative development thereof. To reach the mentioned goal the criteria of innovative activity of the leading machine building enterprises of Ukraine in Kharkov region are chosen as the object of research. The studied enterprises are innovatively active in Kharkov region according to the criteria of the work thereof. The following criteria of innovative activity of the enterprises are chosen for analysis: the volume of the sold innovative products; the charges for innovation; the research intensity of the innovative products; the share of the studied enterprises in the total volume of the products sold in this region; the quantity of the new technological processes; the quantity of the new innovative kinds of products. The chosen criteria are important for enterprise in relation to the innovative activity and in case of changes have a substantial influence on its development and stability. Methodology. To research the level of innovative development of the machine building enterprises of Ukraine in Kharkov region the author prop: 1 Formation of the matrix of the basic data; 2 Standardization of the basic data; 3 Differentiation of the characteristics on inciters and disincentives; 4 Construction of the etalon; 5 Determination of the distance between the objects and

  10. The Dynamics of Innovation Influents

    DEFF Research Database (Denmark)

    Reijonen, Satu; Pinheiro-Croisel, Rebecca

    Despite a growing interest, sustainable energy innovations encounter difficulties in attaining market success. This paper investigates the role of contracts, a hitherto understudied innovation influent, in generating more conducive conditions for sustainable energy innovations in building projects...... of the project and the ways in which the benefits and costs are calculated and thereby create a strong entanglement of the sustainable energy innovation and the design project. Furthermore, the dynamics lead to favouring of uptake of existing innovations rather than generating completely novel solutions...

  11. Strategy of technology and innovation

    International Nuclear Information System (INIS)

    Kim, Yeon Min

    1998-10-01

    This book introduces strategy of technology and innovation which includes design and development of strategy of technology, performance of strategy of technology and building and practice of strategy of development. The contents of this book are form of industrial innovation, act in strategy, advantage of technical innovation, new perspective of studying and innovation, alliance with competitor, cost of transmission and innovation, learning cycle of new product and power of consistency of product.

  12. Building interdisciplinary leadership skills among health practitioners in the 21st century: an innovative training model

    Directory of Open Access Journals (Sweden)

    Preeti eNegandhi

    2015-10-01

    Full Text Available Transformational learning is the focus of 21st century global educational reforms. In India there is a need to amalgamate the skills and knowledge of medical, nursing and public health practitioners and to develop robust leadership competencies among them. This initiative proposed to identify interdisciplinary leadership competencies among Indian health practitioners, and to develop a training program for interdisciplinary leadership skills through an Innovation Collaborative. Medical, nursing and public health institutions partnered in this endeavour. An exhaustive literature search was undertaken to identify leadership competencies in these three professions. Published evidence was utilized in searching for the need for interdisciplinary training of health practitioners, including current scenarios in inter-professional health education and the key competencies required. The interdisciplinary leadership competencies identified were: self-awareness, vision, self-regulation, motivation, decisiveness, integrity, interpersonal communication skills, strategic planning, team-building, innovation and being an effective change agent. Subsequently, a training program was developed and three training sessions were piloted with 66 participants. Each cohort comprised of a mix of participants from different disciplines. The pilot training guided the development of a training model for building interdisciplinary leadership skills and organizing interdisciplinary leadership workshops. The need for interdisciplinary leadership competencies is recognized. The long-term objective of the training model is integration into the regular medical, nursing and public health curricula, with the aim of developing interdisciplinary leadership skills among them. Although challenging, formal incorporation of leadership skills into health professional education is possible within the interdisciplinary classroom setting using principles of transformative learning.

  13. Adapting advanced engineering design approaches to building design - potential benefits

    NARCIS (Netherlands)

    Hopfe, C.J.; Struck, C.; Hensen, J.L.M.; Böhms, M.

    2006-01-01

    A number of industries continuously progress advancing their design approaches based on the changing market constraints. Examples such as car, ship and airplane manufacturing industries utilize process setups and techniques, that differ significantly from the processes and techniques used by the

  14. Adapting advanced engineering design approaches to building design. Potential benefits

    NARCIS (Netherlands)

    Böhms, M.

    2006-01-01

    A number of industries continuously progress advancing their design approaches based on the changing market constraints. Examples such as car, ship and airplane manufacturing industries utilize process setups and techniques, that differ significantly from the processes and techniques used by the

  15. Transferring Knowledge from Building Operation to Design: A literature review

    DEFF Research Database (Denmark)

    Rasmussen, Helle Lohmann; Jensen, Per Anker; Gregg, Jay Sterling

    . Knowing that the list lacks inputs from cultural and organizational theory, the paper suggests that further research should focus on taking these suggestions to an operational level for the benefit of FM, building clients and design teams. Furthermore, it is found that major concepts that could......As a solution to the previously identified gap between expected and actual building performance, this paper investigates how knowledge can be transferred from operation to design. This is assumed to help bridge the gap and increase the performance of new built facilities. By conducting a systematic...... literature review, it is found, that the theoretical approach in the reviewed articles has a significant impact on the level of how applicable the recommendations are in practice. Furthermore, a list of identified tools to enable knowledge transfer is provided, including POE, PPP and building commissioning...

  16. NEST – A platform for the acceleration of innovation in buildings

    Directory of Open Access Journals (Sweden)

    P. Richner

    2018-01-01

    Full Text Available The speed and quality of innovation in the construction sector has to be substantially increased in order to meet the pressing challenges associated with the building stock. For this purpose, the NEST project was started in Switzerland. NEST is a flexible and open research and technology transfer platform for partners from academia and industry where new solutions can be implemented and validated in a real life environment. NEST consists of a backbone, the static part, and research units which serve as office or living space where people live and work. Each unit is addressing specific research topics such as timber construction or digital fabrication and bears numerous innovation objects which are subject to continuous development and evaluation. NEST is a vertical neighbourhood of units, which are connected to a water hub and an energy hub. Once the research questions in a unit are answered and new products have been developed, the unit is deconstructed and replaced by a new unit addressing new topics.

  17. Governing Methods: Policy Innovation Labs, Design and Data Science in the Digital Governance of Education

    Science.gov (United States)

    Williamson, Ben

    2015-01-01

    Policy innovation labs are emerging knowledge actors and technical experts in the governing of education. The article offers a historical and conceptual account of the organisational form of the policy innovation lab. Policy innovation labs are characterised by specific methods and techniques of design, data science, and digitisation in public…

  18. Innovation in Doctoral Degrees Designed for Adult Learners: A Hybrid Model in Personal Financial Planning

    Science.gov (United States)

    Grable, John E.

    2011-01-01

    Innovation in doctoral degree program development and delivery provides an effective counterpoint to the expert-apprentice model established in the Middle Ages. The author outlines the importance of innovation in reaching adult learners and describes an innovative hybrid PhD program designed to allow aspiring doctoral adult-age students to pursue…

  19. USE Efficiency: an innovative educational programme for energy efficiency in buildings

    Science.gov (United States)

    Papadopoulos, Theofilos A.; Christoforidis, Georgios C.; Papagiannis, Grigoris K.

    2017-10-01

    Power engineers are expected to play a pivotal role in transforming buildings into smart and energy-efficient structures, which is necessary since buildings are responsible for a considerable amount of the total energy consumption. To fulfil this role, a holistic approach in education is required, tackling subjects traditionally related to other engineering disciplines. In this context, USE Efficiency is an inter-institutional and interdisciplinary educational programme implemented in nine European Universities targeting energy efficiency in buildings. The educational programme effectively links professors, students, engineers and industry experts, creating a unique learning environment. The scope of the paper is to present the methodology and the general framework followed in the USE Efficiency programme. The proposed methodology can be adopted for the design and implementation of educational programmes on energy efficiency and sustainable development in higher education. End-of-course survey results showed positive feedback from the participating students, indicating the success of the programme.

  20. Results of the Washington Passive Solar Design/Build Competition

    Energy Technology Data Exchange (ETDEWEB)

    Nylen, N.

    1981-01-01

    In an effort to encourage the design, construction, and marketing of moderately priced passive solar homes in Washington state, the Western Solar Utilization Network (Western SUN) recently sponsored the Washington Passive Solar Design/Build Competition. The competition drew an overwhelming response from designers and builders throughout Washington. Thermal performance of the designs was evaluated by a technical review committee, and final selections were made by the Competition Jury in accordance with the following criteria: perceived market acceptance, thermal performance, cost effectiveness, simplicity of design and operation, and completeness of the passive concept. Design contract awards totaling $50,000 were made available to winners in four categories, including single and multi-family, new and remodeled residences. In order to receive the award in its entirety, winning design/build teams are required to construct their design by April, 1983. As a result of the competition, a great deal was learned about the attitudes and knowledge of professionals and the general public regarding the use of solar energy in Washington state. Among the points that will be highlighted in this paper are the following: (1) a design/build competition is an effective vehicle for promoting solar energy among professionals in the housing community as well as the general public; (2) passive solar techniques can contribute significantly to the heating and cooling needs of residential housing throughout the state of Washington; (3) there is a great deal of interest and talent among the designers and builders of solar residences in Washington; and (4) follow-up activities, including the promotion of winning designs, the systematic collection of performance data, and identification of the major obstacles confronting designers and builders of solar homes, are critical to the success of the program in achieving both its short-term and long-term goals.

  1. Towards a Very Low Energy Building Stock: Modeling the U.S. Commercial Building Sector to Support Policy and Innovation Planning

    Energy Technology Data Exchange (ETDEWEB)

    Coffey, Brian; Borgeson, Sam; Selkowitz, Stephen; Apte, Josh; Mathew, Paul; Haves, Philip

    2009-07-01

    This paper describes the origin, structure and continuing development of a model of time varying energy consumption in the US commercial building stock. The model is based on a flexible structure that disaggregates the stock into various categories (e.g. by building type, climate, vintage and life-cycle stage) and assigns attributes to each of these (e.g. floor area and energy use intensity by fuel type and end use), based on historical data and user-defined scenarios for future projections. In addition to supporting the interactive exploration of building stock dynamics, the model has been used to study the likely outcomes of specific policy and innovation scenarios targeting very low future energy consumption in the building stock. Model use has highlighted the scale of the challenge of meeting targets stated by various government and professional bodies, and the importance of considering both new construction and existing buildings.

  2. Interactive Building Design Space Exploration Using Regionalized Sensitivity Analysis

    DEFF Research Database (Denmark)

    Østergård, Torben; Jensen, Rasmus Lund; Maagaard, Steffen

    2017-01-01

    simulation inputs are most important and which have negligible influence on the model output. Popular sensitivity methods include the Morris method, variance-based methods (e.g. Sobol’s), and regression methods (e.g. SRC). However, all these methods only address one output at a time, which makes it difficult...... in combination with the interactive parallel coordinate plot (PCP). The latter is an effective tool to explore stochastic simulations and to find high-performing building designs. The proposed methods help decision makers to focus their attention to the most important design parameters when exploring......Monte Carlo simulations combined with regionalized sensitivity analysis provide the means to explore a vast, multivariate design space in building design. Typically, sensitivity analysis shows how the variability of model output relates to the uncertainties in models inputs. This reveals which...

  3. Safety design integrated in the building delivery system

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten

    2013-01-01

    . The purpose of this article is to demonstrate how safety and health can be integrated in the design phases integrated in the management delivery systems within construction, The method for the research was to go through the building delivery system step by step and create a normative description of what, when......In construction, it is important to view safety and health as an integrated part of the way that “designers” are working. The designers cowers architects, constructors, engineers and others who carry out their consulting services in the design phase of a construction project. The philosophy...... and how to fully integrate safety in each part of the process. The result is a concept and guideline including control forms for how to integrate safety design in the Building Delivery System plus what to do and when. The concept has been tested in an educational context. The practical value...

  4. Towards controlled innovation of complex objects.: A sociotechnical approach to describing ship design

    OpenAIRE

    van Bruinessen, T.M.

    2016-01-01

    Within the ship design industry, and in particular in the development of large, complex and innovative vessels experienced ship designers play an important role in organizing and structuring the design process. How this actually happens within projects that develop such large, complex and innovative vessels for a single client is not clear. This observation lead to a broad, initial research question as the starting point for further research. How are innovative, large and complex vessels deve...

  5. Early decision support for net zero energy buildings design using building performance simulation

    NARCIS (Netherlands)

    Attia, S.G.; Gratia, E.; De Herde, A.; Hensen, J.L.M.

    2013-01-01

    This paper aims to investigate the use of building performance simulation tools as a method of informing the design decision of NZEBs. The aim of this study is to evaluate the effect of a simulation-based decision aid, ZEBO, on informed decision-making using sensitivity analysis. The objective is to

  6. Commentary on ``Future directions: Building technologies and design tools``

    Energy Technology Data Exchange (ETDEWEB)

    Quadrel, R.W.

    1992-08-10

    This paper presents a number of interesting and thought-provoking scenarios about the future use of advanced technology in the design and operation of commercial buildings. I will express my reactions in the following series of short paragraphs. These thoughts will, I hope, raise some new questions and offer fruitful directions for further exploration.

  7. School Building Design and Audio-Visual Resources.

    Science.gov (United States)

    National Committee for Audio-Visual Aids in Education, London (England).

    The design of new schools should facilitate the use of audiovisual resources by ensuring that the materials used in the construction of the buildings provide adequate sound insulation and acoustical and viewing conditions in all learning spaces. The facilities to be considered are: electrical services; electronic services; light control and…

  8. Designing Opportunities to Learn Mathematics Theory-Building Practices

    Science.gov (United States)

    Bass, Hyman

    2017-01-01

    Mathematicians commonly distinguish two modes of work in the discipline: "Problem solving," and "theory building." Mathematics education offers many opportunities to learn problem solving. This paper explores the possibility, and value, of designing instructional activities that provide supported opportunities for students to…

  9. Multivariant design and multiple criteria analysis of building refurbishments

    Energy Technology Data Exchange (ETDEWEB)

    Kaklauskas, A.; Zavadskas, E. K.; Raslanas, S. [Faculty of Civil Engineering, Vilnius Gediminas Technical University, Vilnius (Lithuania)

    2005-07-01

    In order to design and realize an efficient building refurbishment, it is necessary to carry out an exhaustive investigation of all solutions that form it. The efficiency level of the considered building's refurbishment depends on a great many of factors, including: cost of refurbishment, annual fuel economy after refurbishment, tentative pay-back time, harmfulness to health of the materials used, aesthetics, maintenance properties, functionality, comfort, sound insulation and longevity, etc. Solutions of an alternative character allow for a more rational and realistic assessment of economic, ecological, legislative, climatic, social and political conditions, traditions and for better the satisfaction of customer requirements. They also enable one to cut down on refurbishment costs. In carrying out the multivariant design and multiple criteria analysis of a building refurbishment much data was processed and evaluated. Feasible alternatives could be as many as 100,000. How to perform a multivariant design and multiple criteria analysis of alternate alternatives based on the enormous amount of information became the problem. Method of multivariant design and multiple criteria of a building refurbishment's analysis were developed by the authors to solve the above problems. In order to demonstrate the developed method, a practical example is presented in this paper. (author)

  10. Question Sets and Profiles: A Technique for Evaluating Building Design.

    Science.gov (United States)

    Scoffham, Stephen

    1982-01-01

    A questionnaire (survey sheet) has been developed focusing on some of the factors an architect has to consider in designing a house (site, appearance, suitability, and building maintenance). The use of the questionnaire by students and "spin off" activities are discussed. (Author/JN)

  11. Product Modelling for Building Design: Annotated Bibliography (2nd Edition)

    DEFF Research Database (Denmark)

    Galle, Per

    1999-01-01

    This bibliography concerns research publications from 1976 to 1994-5, on product modelling in computer aided architectural design and computer aided engineering design of buildings and their surroundings. For each item of literature, full bibliographic information is given whenever available...... of literature is offered on machine interpretation of drawings, which may be relevant in the context of information exchange among different product models. Although the bibliography is fairly comprehensive as far as it goes, no completeness of coverage is claimed....

  12. An Innovative Use of Renewable Ground Heat for Insulation in Low Exergy Building Systems

    Directory of Open Access Journals (Sweden)

    Hansjürg Leibundgut

    2012-08-01

    Full Text Available Ground heat is a renewable resource that is readily available for buildings in cool climates, but its relatively low temperature requires the use of a heat pump to extract it for heating. We developed a system that uses low temperature ground heat directly in a building wall to reduce transmission heat losses. The Active Low Exergy Geothermal Insulation Systems (ALEGIS minimizes exergy demand and maximizes the use of renewable geothermal heat from the ground. A fluid is pumped into a small pipe network in an external layer of a wall construction that is linked to a ground heat source. This decouples the building from the outside temperature, therefore eliminating large peak demands and reducing the primary energy demand. Our steady-state analysis shows that at a design temperature of −10 °C the 6 cm thick active insulation system has equivalent performance to 11 cm of passive insulation. Our comparison of heating performance of a building with our active insulation system versus a building with static insulation of the same thickness shows a 15% reduction in annual electricity demand, and thus exergy input. We present an overview of the operation and analysis of our low exergy concept and its modeled performance.

  13. Improving innovation strategic decision-making through the collaboration with design consultancies

    NARCIS (Netherlands)

    Calabretta, G.; Gemser, G.; Wijnberg, N.; Hekkert, P.P.M.

    2012-01-01

    Innovation and design literature have given limited consideration to the strategic role of design consultancies in the innovation processes of their clients. A plausible explanation is the difficulty to assess the quality of design consultancies’ output, given the intangibility of the output itself

  14. Building energy analysis of Electrical Engineering Building from DesignBuilder tool: calibration and simulations

    Science.gov (United States)

    Cárdenas, J.; Osma, G.; Caicedo, C.; Torres, A.; Sánchez, S.; Ordóñez, G.

    2016-07-01

    This research shows the energy analysis of the Electrical Engineering Building, located on campus of the Industrial University of Santander in Bucaramanga - Colombia. This building is a green pilot for analysing energy saving strategies such as solar pipes, green roof, daylighting, and automation, among others. Energy analysis was performed by means of DesignBuilder software from virtual model of the building. Several variables were analysed such as air temperature, relative humidity, air velocity, daylighting, and energy consumption. According to two criteria, thermal load and energy consumption, critical areas were defined. The calibration and validation process of the virtual model was done obtaining error below 5% in comparison with measured values. The simulations show that the average indoor temperature in the critical areas of the building was 27°C, whilst relative humidity reached values near to 70% per year. The most critical discomfort conditions were found in the area of the greatest concentration of people, which has an average annual temperature of 30°C. Solar pipes can increase 33% daylight levels into the areas located on the upper floors of the building. In the case of the green roofs, the simulated results show that these reduces of nearly 31% of the internal heat gains through the roof, as well as a decrease in energy consumption related to air conditioning of 5% for some areas on the fourth and fifth floor. The estimated energy consumption of the building was 69 283 kWh per year.

  15. Optimization of Design and Planing VHS Building Using Chronolux

    Directory of Open Access Journals (Sweden)

    Beta Paramita

    2016-09-01

    Full Text Available Gedebage integrated vocational high school (SMK is a school which accommodates the concept of technopolis. The school has four programs: building engineering, family welfare education (PKK/food service, mechanical engineering, and tourism - which produce skilled and ready-to-work graduates. This article aims to recommend the sun exposure toward the building of the school, which is related to site planning and design strategies based on the duration of solar radiation on vegetation, and building facades as well as the distance between buildings through the use of Chronolux plug-in on Sketch-up Software. From the measurement, it is found that vegetation can reduce sky view factors (SVF from 76.4 to 38.87%. For the building façade, it is able to reduce sun exposure from 4 hours 51 minutes to 3 hours 19 minutes with SVF from 47.26 to 38.11%. Meanwhile, the building distance of 9 m receives sun exposure from 9:00 am to 3.42 pm.

  16. The market for green building in developed Asian cities. The perspectives of building designers

    International Nuclear Information System (INIS)

    Chan, Edwin H.W.; Qian, Queena K.; Lam, Patrick T.I.

    2009-01-01

    Green building (GB) is part of the concept of promoting sustainability. Although GB and the concept of sustainability are well studied for environmental concerns, their business rationale and related social concerns have not been fully explored or widely accepted by the parties involved in the building sector. In this study, the situation of GB market in relation to the general building market is reviewed and the business rationales of stakeholders to invest in the GB market have been investigated from the perspective of building designers. In addition, the factors that enhance the popularity of GB have been explored and the obstacles that hinder its market have been examined. The data are collected by a questionnaire survey covering building designers in Hong Kong and Singapore, the cities that are categorized as economically developed cities in Asia. After data analysis of the survey, this paper presents the findings of the business reasons for stakeholders to be involved in GB, the most favorable conditions required to promote GB business and the important obstacles that hinder its popularity. Based on the findings, recommendations and policy implications are tendered. (author)

  17. The evaluation of innovative production to ensure quality in sustainable buildings

    Directory of Open Access Journals (Sweden)

    Antonella Postorino

    2013-08-01

    Full Text Available The LaboReg has spent years to focus on the purpose of internal research on practical application of the achieved  results and the involvement in all phases of business, governments and local entrepreneurs in order to anticipate times and procedures to make a decision towards sustainable solutions. The synergy created between the academic world, the local government and the businesses has put together a research whose main objective is oriented towards the implementation of the productive sectors of the local construction materials to be used in the restoration and rehabilitation of historic buildings and new green building measures in the prospective of environmental sustainability and energy conservation. Within the research programme, interesting results have emerged in the field of experiments called “New Historical Materials.” In this field of ​​activity a research has emerged on the implementation of a prototype of a “new town photovoltaic roof tiles”. The study has provided a first significant result, that is the development of a model of assessment and control of production processes, and some innovative materials.

  18. Innovative technologies of outsourcing at the machine-building enterprises of Sverdlovsk area

    Directory of Open Access Journals (Sweden)

    P. P. Krylatkov

    2010-09-01

    Full Text Available The analysis of the basic problems connected with infringements of integrity of the machine-building enterprises of Sverdlovsk area is lead in the article. The specified problems are considered from a position of the complete approach developed by the author. Display of infringements of integrity of some the enterprises are illustrated by data of their inspection. As the effective tool of increase of integrity of the enterprises — expansion use of attitudes of outsourcing is offered. The comparative given applications of outsourcing in developed the country of the West and at the domestic enterprises, and also its benefits and risks are cited. Outsourcing, insoursing and subcontracting are considered by the author as the innovative tool of the decision of many serious problems of the machine-building enterprises of region. As an example practice of work of «The Sverdlovsk regional center of industrial cooperation» on coordination of attitudes of outsourcing, subcontracting and cooperation is offered. The author recommends the tabulated form, with the instruction of kinds of works for which performance the method of allocation or attraction outsourcing of the companies can be used.

  19. Red Indian Lake fishway, an innovative design for difficult conditions

    International Nuclear Information System (INIS)

    Helwig, P.C.; Goosney, R.; Smith, W.L.

    1993-01-01

    Red Indian Lake Dam is a large concrete gravity structure, 10-12 m high and 245 m long, in the Exploits River watershed in Newfoundland. The watershed is an ideal habitat for production of Atlantic salmon. Since 1985, the watershed above the dam has undergone an extensive stocking program to optimize the salmon production capacity of the upper reaches of the system. To sustain this development, a fishway was needed to permit returning salmon to bypass Red Indian Lake Dam, the last remaining migrational barrier. The difficulties with installing a fishway at the dam site included extreme variation in upstream water levels, the need to retrofit a fishway into an existing structure, and the necessity to attract fish into the fishway in competition with other flows from power plant, spillway, or waterfall. After examining several design approaches, an innovative design was developed incorporating two separate but interrelated flow ways: one to handle attraction water and the other for transportation water. The latter passage leads to a trap at the upper end of the fishway from which salmon are hoisted via a hopper/monorail system across the dam and into the lake. Construction of the fishway was staged over four phases between December 1985 and December 1988. 3 refs., 1 fig

  20. Assessment of dynamic and long-term performance of an innovative multi-story timber building via structural monitoring and dynamic testing

    Science.gov (United States)

    Omenzetter, Piotr; Morris, Hugh; Worth, Margaret; Gaul, Andrew; Jager, Simon; Desgeorges, Yohann

    2012-04-01

    An innovative three-story timber building, using self-centering, post-tensioned timber shear walls as the main horizontal load resisting system and lightweight non-composite timber-concrete floors, has recently been completed in Nelson, New Zealand. It is expected to be the trailblazer for similar but taller structures to be more widely adopted. Performance based standards require an advanced understanding of building responses and in order to meet the need for in-situ performance data the building has been subjected to forced vibration testing and instrumented for continuous monitoring using a total of approximately 90 data channels to capture its dynamic and long-term responses. The first part of the paper presents a brief discussion of the existing research on the seismic performance of timber frame buildings and footfall induced floor vibrations. An outline of the building structural system, focusing on the novel design solutions, is then discussed. This is followed by the description of the monitoring system. The analysis of monitoring results starts with a discussion of the monitoring of long-term deformations. Next, the assessment of the floor vibration serviceability performance is outlined. Then, the forced vibration tests conducted on the whole building at different construction stages are reviewed. The system identification results from seismic shaking records are also discussed. Finally, updating of a finite element model of the building is conducted.

  1. OneGeology - a geoscience exemplar for worldwide cyberinfrastructure capacity-building and scientific innovation

    Science.gov (United States)

    van Daalen, T.; Allison, M. L.

    2012-12-01

    OneGeology is a trail-blazing global initiative that has helped propel the geosciences into the forefront of cyberinfrastructure development with potentially transformative impacts on scientific and technical innovation across broad areas of society. In the five years since its launch, 117 nations, through their Geological Surveys have signed the OneGeology protocols and nearly half are serving up national geological maps as Web services at varying scales, with the remainder developing those capabilities. In federal systems, states and provinces are increasingly adding higher resolution spatial data to the national contributions to the global system. The OneGeology concept of a distributed, open-source, Web-service based network has become the archetype for transforming data into knowledge and innovation. This is not only revolutionizing the geosciences but offering opportunities for governments to use these cutting-edge capabilities for broad innovation and capacity building. Across the globe, communities are facing the same four challenges: put simply, how do we best make data discoverable, shareable, viewable and downloadable, so that the user also has access to consistent data at a national and continental level? The principle of managing scientific and societal data and knowledge where they are generated and are best understood is well established in the geoscience community and can be scaled up and transferred to other domains and sectors of society. The distributed nature of most data sources means the complementary delivery mechanism of Web map services has become equally prevalent in the spatial data community. Together these factors are driving a world-wide revolution in the way spatial information is being disseminated to its users. Industry, academia, and governments are quickly adopting and adapting to this new paradigm and discovering that very modest investments in this emerging field are reaping tremendous returns in national capacity and triggering

  2. Alternative design concept for the second Glass Waste Storage Building

    International Nuclear Information System (INIS)

    Rainisch, R.

    1992-10-01

    This document presents an alternative design concept for storing canisters filled with vitrified waste produced at the Defense Waste Processing Facility (DWPF). The existing Glass Waste Storage Building (GWSB1) has the capacity to store 2,262 canisters and is projected to be completely filled by the year 2000. Current plans for glass waste storage are based on constructing a second Glass Waste Storage Building (GWSB2) once the existing Glass Waste Storage Building (GWSB1) is filled to capacity. The GWSB2 project (Project S-2045) is to provide additional storage capacity for 2,262 canisters. This project was initiated with the issue of a basic data report on March 6, 1989. In response to the basic data report Bechtel National, Inc. (BNI) prepared a draft conceptual design report (CDR) for the GWSB2 project in April 1991. In May 1991 WSRC Systems Engineering issued a revised Functional Design Criteria (FDC), the Rev. I document has not yet been approved by DOE. This document proposes an alternative design for the conceptual design (CDR) completed in April 1991. In June 1992 Project Management Department authorized Systems Engineering to further develop the proposed alternative design. The proposed facility will have a storage capacity for 2,268 canisters and will meet DWPF interim storage requirements for a five-year period. This document contains: a description of the proposed facility; a cost estimate of the proposed design; a cost comparison between the proposed facility and the design outlined in the FDC/CDR; and an overall assessment of the alternative design as compared with the reference FDC/CDR design

  3. Do design rules facilitate or complicate architectural innovation in innovation alliance networks?

    NARCIS (Netherlands)

    Hofman, Erwin; Halman, Johannes I.M.; van Looy, Bart

    2016-01-01

    Architectural innovation is fundamental to the renewal of technological systems. However, it can be a real challenge to organize architectural innovation, all the more so when success hinges upon close collaboration with other firms that are responsible for different subsystems of the end product.

  4. Can Building Design Impact Physical Activity? A Natural Experiment.

    Science.gov (United States)

    Eyler, Amy A; Hipp, Aaron; Valko, Cheryl Ann; Ramadas, Ramya; Zwald, Marissa

    2018-05-01

    Workplace design can impact workday physical activity (PA) and sedentary time. The purpose of this study was to evaluate PA behavior among university employees before and after moving into a new building. A pre-post, experimental versus control group study design was used. PA data were collected using surveys and accelerometers from university faculty and staff. Accelerometry was used to compare those moving into the new building (MOVERS) and those remaining in existing buildings (NONMOVERS) and from a control group (CONTROLS). Survey results showed increased self-reported PA for MOVERS and NONMOVERS. All 3 groups significantly increased in objectively collected daily energy expenditure and steps per day. The greatest steps per day increase was in CONTROLS (29.8%) compared with MOVERS (27.5%) and NONMOVERS (15.9%), but there were no significant differences between groups at pretest or posttest. Self-reported and objectively measured PA increased from pretest to posttest in all groups; thus, the increase cannot be attributed to the new building. Confounding factors may include contamination bias due to proximity of control site to experimental site and introduction of a university PA tracking contest during postdata collection. Methodology and results can inform future studies on best design practices for increasing PA.

  5. Digitalization as Driver for Standardized Specification and Design of Buildings: In Search of an Efficient Building Design Management Methodology

    DEFF Research Database (Denmark)

    Treldal, Niels

    of this research is, therefore, to increase the understanding of the relation between information needs, standardisation and efficient design management. The research draws on findings from previous research on information management, design management and socio-technical science and focuses in particular......-value adding design iterations will occur too frequently if the variability is not carefully managed. Building a strong community within the design team is found to be critical to reduce variability as it allows project managers to entrust the team to find solutions and coordinate activities more efficiently...... standards were developed in the current research. An IDM package framework is proposed to make the current IDM methodology from buildingSMART more modular and easier to reuse and utilize on projects. A generic LOD framework is proposed to make the agreement on geometry information exchange more pragmatic...

  6. Seismic design of a uranium conversion plant building

    International Nuclear Information System (INIS)

    Peixoto, O.J.M.; Botelho, C.L.A.; Braganca, A. Jr.; C. Santos, S.H. de.

    1992-01-01

    The design of facilities with small radioactive inventory has been traditionally performed following the usual criteria for industrial buildings. In the last few years, more stringent criteria have been adopted in new nuclear facilities in order to achieve higher standards for environmental protection. In uranium conversion plants, the UF 6 (uranium hexafluoride) production step is the part of the process with the highest potential for radioactivity release to the environment because of the operations performed in the UF 6 desublimers and cylinder filling areas as well as UF 6 distillation facilities, when they are also required in the process. This paper presents the design guidelines and some details of the seismic resistance design of a UF 6 production building to be constructed in Brazil

  7. On ethics and the earthquake resistant interior design of buildings.

    Science.gov (United States)

    Hurol, Yonca

    2014-03-01

    The most common tectonic quality of modern structures, such as frame systems, is their flexibility; they are open for change. Although this characteristic is a big advantage in comparison to the inflexible masonry structures of the past, it might also create some serious problems, such as e.g. the lack of safety in the event of an earthquake, if the flexibility is not used consciously by architects and interior designers. This article attempts to define and establish some rules for the interior design of buildings with reinforced concrete frame systems. The rules for making subtractions from these structures and extending them by making additions to them are contained within this article. The main objective of this article is to derive some ethical values from these rules. Thus, the conclusion of the article focuses on the derivation of some ethical values for achieving earthquake resistant interior design of buildings with reinforced concrete frame systems.

  8. Open BIM in course on advanced building design

    DEFF Research Database (Denmark)

    Karlshøj, Jan

    2016-01-01

    shall hand in BIM models in open BIM, specifically in IFC-format. The paper describes how the course and use of BIM is evaluated by the students, and the finding correcting the delivered BIM models in IFC-format. Use of model servers and BCF are briefly described. Issues regarding challenges...... in coordination, teamwork building and mutual dependencies were registered from students’ evaluation of the course. Overall, the students reported becoming familiar with open BIM and experienced the freedom to choose their preferred BIM tool for each specific job to see if it was possible to coordinate a building...... design project using open BIM. Graduate students working in the building construction industry expressed satisfaction with the course....

  9. Structural Analysis and Seismic Design for Cold Neutron Laboratory Building

    International Nuclear Information System (INIS)

    Wu, Sangik; Kim, Y. K.; Kim, H. R.

    2007-05-01

    This report describes all the major results of the dynamic structural analysis and seismic design for the Cold Neutron Laboratory Building which is classified in seismic class II. The results are summarized of the ground response spectrum as seismic input loads, mechanical properties of subsoil, the buoyancy stability due to ground water, the maximum displacement of the main frame under the seismic load and the member design. This report will be used as a basic design report to maintenance its structural integrity in future

  10. Building the Capacity to Innovate: The Role of Human Capital. Research Report

    Science.gov (United States)

    Smith, Andrew; Courvisanos, Jerry; Tuck, Jacqueline; McEachern, Steven

    2012-01-01

    This report examines the link between human resource management practices and innovation. It is based on a conceptual framework in which "human resource stimuli measures"--work organisation, working time, areas of training and creativity--feed into innovative capacity or innovation. Of course, having innovative capacity does not…

  11. Building Information Modeling for Managing Design and Construction

    DEFF Research Database (Denmark)

    Berard, Ole Bengt

    outcome of construction work. Even though contractors regularly encounter design information problems, these issues are accepted as a condition of doing business and better design information has yet to be defined. Building information modeling has the inherent promise of improving the quality of design...... information for work tasks. * Amount of Information – the number of documents and files, and other media, should be appropriate for the scope. The criteria were identified by empirical studies and theory on information quality in the architectural, engineering and construction (AEC) industry and other fields......Contractors planning and executing construction work encounter many kinds of problems with design information, such as uncoordinated drawings and specification, missing relevant information, and late delivery of design information. Research has shown that missing design information and unintended...

  12. Using methodical design for culture change in Dutch building design practice : karning by doing' workshops

    NARCIS (Netherlands)

    Savanovic, P.; Zeiler, W.

    2007-01-01

    Since 2001 the ‘integral approach’ has been propagated within Dutch building design practice, through continuously developing ‘learning by doing’ workshops. The organization of workshops started during the ‘Integral Design’ project that was conducted by the Dutch Society for Building Services

  13. Public procurement of innovation in construction : A design science approach

    NARCIS (Netherlands)

    Lenderink, B.; Halman, J. I.M.; Voordijk, J.T.

    2016-01-01

    The inclusion of innovation as a policy objective in public procurement has increased significantly at public organizations over the last years. However, public organizations often struggle with how they should stimulate innovation through public procurement as there are many different ways possible

  14. An Innovative Enhanced Wall to Reduce the Energy Demand in Buildings

    Science.gov (United States)

    Fantozzi, F.; Filipeschi, S.; Mameli, M.; Nesi, S.; Cillari, G.; Mantelli, M. B. H.; Milanez, F. H.

    2017-01-01

    Energy saving in buildings is one of most important issues for European countries. Although in the last years many studies have been carried out in order to reach the zero-consumption house the energy rate due to passive solar heating could be further enhanced. This paper proposes a method for increasing the energy rate absorbed by opaque walls by using a two phase loop thermosyphon connecting the internal and the external façade of a prefabricated house wall. The evaporator zone is embedded into the outside facade and the condenser is indoor placed to heat the domestic environment. The thermosyphon has been preliminary designed and implanted into a wall for a prefabricated house in Italy. An original dynamic thermal model of the building equipped with the thermosyphon wall allowed the evolution of the indoor temperature over time and the energy saving rates. The transient behaviour of the building has been simulated during the winter period by using the EnergyPlusTM software. The annual saving on the heating energy is higher than 50% in the case of a low consumption building.

  15. Linking Design, Marketing, and Innovation: Managing the Connection for Competitive Advantage

    OpenAIRE

    Dr. Yen Hsu

    2012-01-01

    Marketing should closely coordinate with product innovation. Not only will an effective connection of the marketing activity and design trigger product innovation in enterprises, it is a key factor to the product success in the market place. In practice, how to process product design so as to reach the goal of marketing during the innovation procedure? In the past, enterprises did have some concrete actions but empirical studies regarding the correlation model between marketing strategy and d...

  16. Building a Cohesive Body of Design Knowledge: Developments from a Design Science Research Perspective

    DEFF Research Database (Denmark)

    Cash, Philip; Piirainen, Kalle A.

    2015-01-01

    researchers have identified difficulties in building on past works, and combining insights from across the field. This work starts to dissolve some of these issues by drawing on Design Science Research to propose an integrated approach for the development of design research knowledge, coupled with pragmatic......Design is an extremely diverse field where there has been widespread debate on how to build a cohesive body of scientific knowledge. To date, no satisfactory proposition has been adopted across the field – hampering scientific development. Without this basis for bringing research together design...... advice for design researchers. This delivers a number of implications for researchers as well as for the field as a whole....

  17. Design of Sustainable Agricultural Buildings. A Case Study of a Wine Cellar in Tuscany, Italy

    Directory of Open Access Journals (Sweden)

    Leonardo Conti

    2016-04-01

    Full Text Available This research concerns the design of an agricultural building with a high degree of sustainability, located in a farm in the south of the Tuscany region, Italy. The building, intended mainly as a wine cellar, offers innovative construction solutions of high deconstructability and has features of low environmental impact, economic competitiveness and constructive simplicity. In particular, the design of the basement cellar involves the use of gabions and stones for the realization of the foundations, the ground retaining walls and all other bearing walls. A different solution is adopted for the external wall which remains entirely above ground. It is also made by gabions, but it is externally covered with a coat of straw bales and is plastered with clay or lime. The roof-bearing structure is made of steel beams and galvanized steel sheets. A layer of fertile soil is arranged on the roof to form a green roof system. This research aims to spread the design criteria of deconstructable buildings, based on the use of natural materials with low environmental and economic impact. Where it is not possible to employ natural materials, reusable or recyclable materials are used.

  18. Implications of Building Information Modeling on Interior Design Education: The Impact on Teaching Design Processes

    Directory of Open Access Journals (Sweden)

    Amy Roehl, MFA

    2013-06-01

    Full Text Available Currently, major shifts occur in design processes effecting business practices for industries involved with designing and delivering the built environment. These changing conditions are a direct result of industry adoption of relatively new technologies called BIM or Building Information Modeling. This review of literature examines implications of these changing processes on interior design education.

  19. Stimulating energy-efficient innovations in the Dutch building sector: Empirical evidence from patent counts and policy lessons

    International Nuclear Information System (INIS)

    Noailly, Joelle; Batrakova, Svetlana

    2010-01-01

    In the Netherlands where the building sector accounts for 33% of carbon emissions, the government aims to halve the total energy use from buildings by 2030 compared to 1990 levels. To this end, the Dutch government has set specific goals in order to foster technological innovation related to energy efficiency in buildings. The objective of this paper is to explore the links between technological innovation and public policies in this sector over the last 30 years. The paper aims (1) to measure the evolution of innovations related to energy efficiency in buildings in the Netherlands using patent counts and (2) to provide a historical overview of the policy framework. Descriptive data on patenting activities show that the Netherlands have a clear comparative advantage in the field of energy-saving lighting technologies, mainly due to intensive patenting activities by Philips. High-efficiency boilers also represent a substantial share of Dutch innovation activities in this domain over the last decades. In many other fields (such as insulation, heat-pumps and cogeneration, solar boilers, etc.), however, Germany, Austria and Scandinavian countries rank much higher than the Netherlands. The descriptive analysis of Dutch energy policy shows an intensification of energy policy in the mid-1990s, followed by a slight decline after 2001. Overall, the simultaneous introduction of policy instruments makes it difficult to evaluate the effectiveness of policies. Also, the policy framework is characterized by the introduction of a large number of short-lived policy instruments and frequent policy changes. The lack of stability and continuity of energy policy may be damaging for innovation. - Research Highlights: →The Netherlands are a top innovative country in the field of energy-efficient innovations for buildings, mainly due to high patenting activities by Philips in energy-saving lighting technologies. →In many other fields (insulation, heat-pumps, etc) Germany, Austria and

  20. 78 FR 41074 - 60-Day Notice of Proposed Information Collection: Innovation in Affordable Housing Design Student...

    Science.gov (United States)

    2013-07-09

    ... real life problem faced by public housing authorities using innovations in affordable housing design... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5689-N-05] 60-Day Notice of Proposed Information Collection: Innovation in Affordable Housing Design Student Competition AGENCY: Office of Policy...

  1. Designers initiating open innovation with multi-stakeholder through co-reflection sessions

    NARCIS (Netherlands)

    Tomico Plasencia, O.; Lu, Y.; Baha, S.E.; Lehto, P.; Hivikoski, T.; Roozenburg, N.F.M.; Chen, L.; Stappers, P.J.

    2011-01-01

    This paper explores a designerly approach to open innovation initiation as start of the PhD research of the third author. More specifically, it presents the application of co-reflection sessions by designers in a healthcare open innovation project to initiate multi-stakeholder participation.

  2. An Engineering Educator's Decision Support Tool for Improving Innovation in Student Design Projects

    Science.gov (United States)

    Ozaltin, Nur Ozge; Besterfield-Sacre, Mary; Clark, Renee M.

    2015-01-01

    Learning how to design innovatively is a critical process skill for undergraduate engineers in the 21st century. To this end, our paper discusses the development and validation of a Bayesian network decision support tool that can be used by engineering educators to make recommendations that positively impact the innovativeness of product designs.…

  3. Selection and development of innovative design alternatives : Ethical, social and uncertainty issues

    NARCIS (Netherlands)

    Jacobs, J.F.

    2015-01-01

    Innovative engineering design shapes the development of novel technologies and is ethically as well as socially relevant, because it affects what kind of possibilities and consequences will arise. A major challenge in engineering design work on innovative technologies is the multitude of

  4. Structural design of SBWR reactor building complex using microcomputers

    International Nuclear Information System (INIS)

    Mandagi, K.; Rajagopal, R.S.; Sawhney, P.S.; Gou, P.F.

    1993-01-01

    The design concept of Simplified Boiling Water Reactor (SBWR) plant is based on simplicity and passive features to enhance safety and reliability, improve performance, and increase economic viability. The SBWR utilizes passive systems such as Gravity Driven Core-Cooling System (GDCS) and Passive Containment Cooling System (PCCS). To suit these design features the Reactor Building (RB) complex of the SBWR is configured as an integrated structure consisting of a cylindrical Reinforced Concrete Containment Vessel (RCCV) surrounded by square reinforced concrete safety envelope and outer box structures, all sharing a common reinforced concrete basemat. This paper describes the structural analysis and design aspects of the RB complex. A 3D STARDYNE finite element model has been developed for the structural analysis of the complex using a PC Compaq 486/33L microcomputer. The structural analysis is performed for service and factored load conditions for the applicable loading combinations. The dynamic responses of containment structures due to pool hydrodynamic loads have been calculated by an axisymmetric shell model using COSMOS/M program. The RCCV is designed in accordance with ASME Section 3, Division 2 Code. The rest of the RB which is classified as Seismic Category 1 structure is designed in accordance with the ACI 349 Code. This paper shows that microcomputers can be efficiently used for the analysis and design of large and complex structures such as RCCV and Reactor Building complex. The use of microcomputers can result in significant savings in the computational cost compared with that of mainframe computers

  5. Civil engineering in nuclear power stations: design of the turbine building and nuclear auxiliary building

    International Nuclear Information System (INIS)

    Lacroix, R.

    1985-01-01

    After enumerating the specific features of civil engineering in nuclear power stations. One goes on to examine the principal deliberations undertaken with the aim of optimising projects for transition from the P4 to P'4 and then N4 generations of nuclear power stations. The courses of action decided with respect to the design of the machine room and auxiliary equipment building are described [fr

  6. Innovation

    African Journals Online (AJOL)

    In recent years ULA has emphasized advocacy, and contributed to progress towards new legislation (freedom of information, copyright, the ... East African Community e-government strategy) of importance to the library and ... Innovation Vol.

  7. Risk, innovation and change : design propositions for implementing risk management in organizations

    NARCIS (Netherlands)

    van Staveren, Martinus Theodorus

    2009-01-01

    This Ph.D. research generated unique design propositions for implementing existing risk management methodologies in organizations. The resulting design propositions incorporate a synthesis of risk management, innovation management and change management. True implementation of risk management is

  8. Guidelines for sustainable building design: Recommendations from the Presidio of San Francisco energy efficiency design charrette

    Energy Technology Data Exchange (ETDEWEB)

    Brown, K.; Sartor, D.; Greenberg, S. [and others

    1996-05-01

    In 1994, the Bay Chapter of the Association of Energy Engineers{reg_sign} organized a two-day design charrette for energy-efficient redevelopment of buildings by the National Park Services (NPS) at the Presidio of San Francisco. This event brought together engineers, researchers, architects, government officials, and students in a participatory environment to apply their experience to create guidelines for the sustainable redesign of Presidio buildings. The venue for the charrette was a representative barracks building located at the Main Post of the Presidio. Examination of this building allowed for the development of design recommendations, both for the building and for the remainder of the facilities. The charrette was organized into a committee structure consisting of: steering, measurement and monitoring, modeling, building envelope and historic preservation (architectural), HVAC and controls, lighting, and presentation. Prior to the charrette itself, the modeling and measurement/monitoring committees developed substantial baseline data for the other committees during the charrette. An integrated design approach was initiated through interaction between the committees during the charrette. Later, committee reports were cross-referenced to emphasize whole building design and systems integration.

  9. Participatory innovation through user-designed knowledge sharing and Web2.0 in the Danish seed industry

    DEFF Research Database (Denmark)

    Tveden-Nyborg, Svend; Boelt, Birte; Misfeldt, Morten

    their previous experience. A second workshop will focus on hands-on user experience based on a prototype predesigned from the preliminary research findings. The final workshop will build up a common knowledge discourse among its participants, and work towards an overall requirement specification for a preferred...... seed scientists from Aarhus University will work together with seed growers and seed company consultants in designing a collaborative knowledge platform to optimise the diffusion of innovation between them. The aim of the Ph.D. project is to look at the processes within the three communities...... of practice in their participatory efforts to design and select technologies that will improve their knowledge dissemination through a shared understanding of learning and innovation within the Danish seed industry. The research questions are: •What boundary objects emerge between and within the collaborating...

  10. Applying the design-build-test paradigm in microbiome engineering.

    Science.gov (United States)

    Pham, Hoang Long; Ho, Chun Loong; Wong, Adison; Lee, Yung Seng; Chang, Matthew Wook

    2017-12-01

    The recently discovered roles of human microbiome in health and diseases have inspired research efforts across many disciplines to engineer microbiome for health benefits. In this review, we highlight recent progress in human microbiome research and how modifications to the microbiome could result in implications to human health. Furthermore, we discuss the application of a 'design-build-test' framework to expedite microbiome engineering efforts by reviewing current literature on three key aspects: design principles to engineer the human microbiome, methods to engineer microbiome with desired functions, and analytical techniques to examine complex microbiome samples. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Building information modeling in the architectural design phases

    DEFF Research Database (Denmark)

    Hermund, Anders

    2009-01-01

    The overall economical benefits of Building Information Modeling are generally comprehensible, but are there other problems with the implementation of BIM as a formulized system in a field that ultimately is dependant on a creative input? Is optimization and economic benefit really contributing...... with an architectural quality? In Denmark the implementation of the digital working methods related to BIM has been introduced by government law in 2007. Will the important role of the architect as designer change in accordance with these new methods, and does the idea of one big integrated model represent a paradox...... in relation to designing? The BIM mindset requires changes on many levels....

  12. Experimental Design Strategy As Part of an Innovative Construction Industry

    NARCIS (Netherlands)

    Rogier Laterveer

    2013-01-01

    This exploratory and conceptual article sets out to research what arguments and possibilities for experimentation in construction exists and if experimentation can contribute towards more innovative construction as a whole. Traditional, -western- construction is very conservative and regional, often

  13. Dynamic stakeholder interaction analysis : Innovative smart living design cases

    NARCIS (Netherlands)

    Solaimani Kartalaei, H.; Guldemond, N.A.; Bouwman, W.A.G.A.

    2013-01-01

    In order to become more innovative, companies that operate in the Smart Living domain increasingly initiate and participate in networked business environments that transcend industry boundaries. Inter-organizational collaboration is often characterized by conflicting strategic interests and

  14. Extended stakeholder interaction analysis : Innovative smart living design cases

    NARCIS (Netherlands)

    Solaimani, S.; Guldemond, N.A.; Bouwman, W.A.G.A.

    2013-01-01

    In order to become more innovative, companies that operate in the Smart Living domain increasingly initiate and participate in networked business environments that transcend industry boundaries. Inter-organizational collaboration is often characterized by conflicting strategic interests and

  15. Selection and development of innovative design alternatives: Ethical, social and uncertainty issues

    OpenAIRE

    Jacobs, J.F.

    2015-01-01

    Innovative engineering design shapes the development of novel technologies and is ethically as well as socially relevant, because it affects what kind of possibilities and consequences will arise. A major challenge in engineering design work on innovative technologies is the multitude of uncertainties in the form of known unknowns, unknown unknowns, complexities, and ambiguities. The evaluation and generation of design concepts are general and essential parts of the design process in which va...

  16. Integrated Thermal-Energy Analysis of Innovative Translucent White Marble for Building Envelope Application

    Directory of Open Access Journals (Sweden)

    Federica Rosso

    2014-08-01

    Full Text Available Marble is a natural material, used in the construction field since antiquity. It has always been used to communicate monumentality and solidity. Nowadays new technologies permit marble to express new languages: particularly, translucent marble technology overturns the concept of solidity. The main issue to address is the lack of thermal-energy performance of such a thin stone layer as the only facade component. Conversely, Bianco Carrara and Statuario marbles, for instance, have intrinsic benefits as natural cool materials, due to their high solar reflectance and thermal emissivity. Thus, this paper analyzes the thermal-energy and environmental behavior of marble facade for a new designed building in New York City. An integrated analysis of the energy performance of the marble skin is performed through a preliminary experimental characterization, carried out for two different types of naturally white marble, for comparative purposes. Then, a dynamic simulation model of the building is developed to evaluate year-round benefits and drawbacks of the translucent marble envelope in terms of indoor thermal comfort and air-conditioning requirement. The analysis showed how the proposed marble facade is able to decrease the energy requirement for cooling up to 6%, demonstrating possible relevant perspectives for marble-based facades, even in energy-efficient buildings.

  17. Building patient-centeredness: hospital design as an interpretive act.

    Science.gov (United States)

    Bromley, Elizabeth

    2012-09-01

    Hospital designs reflect the sociocultural, economic, professional, and aesthetic priorities prevalent at a given time. As such, hospital buildings concretize assumptions about illness, care and healing, patienthood, and medical providers' roles. Trends in hospital design have been attributed to the increasing influence of consumerism on healthcare, the influx of business-oriented managers, and technological changes. This paper describes the impact of the concept of patient-centeredness on the design of a new hospital in the USA. Data come from 35 interviews with planners, administrators, and designers of the new hospital, as well as from public documents about the hospital design. Thematic content analysis was used to identify salient design principles and intents. For these designers, administrators, and planners, an interpretation of patient-centeredness served as a heuristic, guiding the most basic decisions about space, people, and processes in the hospital. I detail the particular interpretation of patient-centeredness used to build and manage the new hospital space and the roles and responsibilities of providers working within it. Three strategies were central to the implementation of patient-centeredness: an onstage/offstage layout; a concierge approach to patients; and the scripting of communication. I discuss that this interpretation of patient-centeredness may challenge medical professionals' roles, may construct medical care as a product that should sate the patient's desire, and may distance patients from the realities of medical care. By describing the ways in which hospital designs reflect and reinforce contemporary concepts of patienthood and caring, this paper raises questions about the implementation of patient-centeredness that deserve further empirical study by medical social scientists. Copyright © 2012 Elsevier Ltd. All rights reserved.

  18. A Dissipative Connector for CLT Buildings: Concept, Design and Testing

    Science.gov (United States)

    Scotta, Roberto; Marchi, Luca; Trutalli, Davide; Pozza, Luca

    2016-01-01

    This paper deals with the conception and characterization of an innovative connection for cross-laminated timber (CLT) panels. The connection is designed to provide an adequate level of dissipative capacity to CLT structures also when realized with large horizontal panels and therefore prone to fragile shear sliding failure. The connector, named X-bracket, has been theorized and designed by means of numerical parametric analyses. Furthermore, its cyclic behavior has been verified with experimental tests and compared to that of traditional connectors. Numerical simulations of cyclic tests of different CLT walls anchored to the foundation with X-brackets were also performed to assess their improved seismic performances. Finally, the analysis of the response of a 6 m × 3 m squat wall demonstrates that the developed connection provides good ductility and dissipation capacities also to shear walls realized with a single CLT panel. PMID:28773265

  19. A Dissipative Connector for CLT Buildings: Concept, Design and Testing.

    Science.gov (United States)

    Scotta, Roberto; Marchi, Luca; Trutalli, Davide; Pozza, Luca

    2016-02-26

    This paper deals with the conception and characterization of an innovative connection for cross-laminated timber (CLT) panels. The connection is designed to provide an adequate level of dissipative capacity to CLT structures also when realized with large horizontal panels and therefore prone to fragile shear sliding failure. The connector, named X-bracket, has been theorized and designed by means of numerical parametric analyses. Furthermore, its cyclic behavior has been verified with experimental tests and compared to that of traditional connectors. Numerical simulations of cyclic tests of different CLT walls anchored to the foundation with X-brackets were also performed to assess their improved seismic performances. Finally, the analysis of the response of a 6 m × 3 m squat wall demonstrates that the developed connection provides good ductility and dissipation capacities also to shear walls realized with a single CLT panel.

  20. Innovation in Deep Space Habitat Interior Design: Lessons Learned From Small Space Design in Terrestrial Architecture

    Science.gov (United States)

    Simon, Matthew A.; Toups, Larry

    2014-01-01

    Increased public awareness of carbon footprints, crowding in urban areas, and rising housing costs have spawned a 'small house movement' in the housing industry. Members of this movement desire small, yet highly functional residences which are both affordable and sensitive to consumer comfort standards. In order to create comfortable, minimum-volume interiors, recent advances have been made in furniture design and approaches to interior layout that improve both space utilization and encourage multi-functional design for small homes, apartments, naval, and recreational vehicles. Design efforts in this evolving niche of terrestrial architecture can provide useful insights leading to innovation and efficiency in the design of space habitats for future human space exploration missions. This paper highlights many of the cross-cutting architectural solutions used in small space design which are applicable to the spacecraft interior design problem. Specific solutions discussed include reconfigurable, multi-purpose spaces; collapsible or transformable furniture; multi-purpose accommodations; efficient, space saving appliances; stowable and mobile workstations; and the miniaturization of electronics and computing hardware. For each of these design features, descriptions of how they save interior volume or mitigate other small space issues such as confinement stress or crowding are discussed. Finally, recommendations are provided to provide guidance for future designs and identify potential collaborations with the small spaces design community.

  1. IMPROVING OF THE ORGANIZATION OF INNOVATION MANAGEMENT OF THE BUILDING ENTERPRISE

    Directory of Open Access Journals (Sweden)

    A. G. Magomedov

    2015-01-01

    Full Text Available The article is devoted to improving the organization of innovative activity management of construction enterprises. Proposed a sequence of actions for improving the management of innovation, substantiated expediency of the use of such institutional innovation management as intrapreneurship and centers of subcontracting. 

  2. Resistance and support to electronic government, building a model of innovation

    NARCIS (Netherlands)

    Ebbers, Wolfgang E.; van Dijk, Johannes A.G.M.

    2007-01-01

    In several countries forces that resist e-government innovations apparently override those that support them. A first step is taken in order to identify organizational processes of resistance and support to e-government innovations. A multi-disciplinary and non-linear innovation model is proposed

  3. Intelligent buildings vs. bioclimatic design; Edificios inteligentes vs. diseno bioclimatico

    Energy Technology Data Exchange (ETDEWEB)

    Aguayo Gonzalez, Ricardo [Tecnologico de Monterrey (Mexico)

    2006-10-15

    Present the form of intelligent buildings designing is the article purpose. Those kinds of edifications take advantage of climatic conditions which allow the users comfort and the efficient electric power use, avoiding the polluting agents. It also shows the four next following stages to design an intelligent building to know: the dry weather and relative dampness schedule variations during a year in the building location; the predominant winds direction, intensity and schedule frequency; the cloudiness, rain, etc and how to use the Givoni diagram to obtain the natural air-conditioning strategies and reach the thermal comfort. [Spanish] El proposito de este articulo es presentar la forma de disenar edificios Inteligentes, los cuales aprovechan las condiciones climaticas que permiten el confort de los usuarios y el uso eficiente de la energia electrica, evitando asi la emision de agentes contaminantes. Tambien menciona los siguientes cuatro pasos para el diseno de un edificio inteligente: conocer las variaciones horarias de temperatura seca y humedad relativa durante un ano en el lugar donde estara el edificio, saber la direccion, intensidad y frecuencia horaria de los vientos dominantes, tener conocimiento de la nubosidad, lluvia, etc. y utilizar el diagrama de Givoni para obtener las estrategias de climatizacion natural para obtener el confort termico.

  4. Upgrading of seismic design of nuclear power plant building

    Energy Technology Data Exchange (ETDEWEB)

    Akiyama, Hiroshi [Tokyo Univ. (Japan). Faculty of Engineering; Kitada, Yoshio

    1997-03-01

    In Japan seismic design methodology of nuclear power plant (NPP) structures has been established as introduced in the previous session. And yet efforts have been continued to date to upgrade the methodology, because of conservative nature given to the methodology in regard to unknown phenomena and technically-limited modeling involved in design analyses. The conservative nature tends to produce excessive safety margins, and inevitably send NPP construction cost up. Moreover, excessive seismic design can increase the burden on normal plant operation, though not necessarily contributing to overall plant safety. Therefore, seismic engineering has put to many tests and simulation analyses in hopes to rationalize seismic design and enhance reliability of seismic safety of NPPs. In this paper, we describe some studies on structural seismic design of NPP underway as part of Japan`s effort to upgrade existing seismic design methodology. Most studies described here are carried out by NUPEC (Nuclear Power Engineering Company) funded by MITI (the Ministry of International Trade and Industry Japan), though, similar studies with the same motive are also carrying out by nuclear industries such as utilities, NPP equipment and system manufacturers and building constructors. This paper consists of three sections, each introducing studies relating to NPP structural seismic design, new siting technology, and upgrading of the methodology of structural design analyses. (J.P.N.)

  5. Upgrading of seismic design of nuclear power plant building

    International Nuclear Information System (INIS)

    Akiyama, Hiroshi; Kitada, Yoshio.

    1997-01-01

    In Japan seismic design methodology of nuclear power plant (NPP) structures has been established as introduced in the previous session. And yet efforts have been continued to date to upgrade the methodology, because of conservative nature given to the methodology in regard to unknown phenomena and technically-limited modeling involved in design analyses. The conservative nature tends to produce excessive safety margins, and inevitably send NPP construction cost up. Moreover, excessive seismic design can increase the burden on normal plant operation, though not necessarily contributing to overall plant safety. Therefore, seismic engineering has put to many tests and simulation analyses in hopes to rationalize seismic design and enhance reliability of seismic safety of NPPs. In this paper, we describe some studies on structural seismic design of NPP underway as part of Japan's effort to upgrade existing seismic design methodology. Most studies described here are carried out by NUPEC (Nuclear Power Engineering Company) funded by MITI (the Ministry of International Trade and Industry Japan), though, similar studies with the same motive are also carrying out by nuclear industries such as utilities, NPP equipment and system manufacturers and building constructors. This paper consists of three sections, each introducing studies relating to NPP structural seismic design, new siting technology, and upgrading of the methodology of structural design analyses. (J.P.N.)

  6. Information delivery manuals to integrate building product information into design

    DEFF Research Database (Denmark)

    Berard, Ole Bengt; Karlshøj, Jan

    2011-01-01

    Despite continuing BIM progress, professionals in the AEC industry often lack the information they need to perform their work. Although this problem could be alleviated by information systems similar to those in other industries, companies struggle to model processes and information needs...... them in information systems. BIM implies that objects are bearers of information and logic. The present study has three main aims: (1) to explore IDMs capability to capture all four perspectives, (2) to determine whether an IDM’s collaborative methodology is valid for developing standardized processes......, and (3) to ascertain whether IDM’s business rules can support the development of information and logic-bearing BIM objects. The research is based on a case study of re-engineering the bidding process for a design-build project to integrate building product manufacturers, subcontractors...

  7. Designing, Building and Controlling of Home Appliances Unit Using PC

    Directory of Open Access Journals (Sweden)

    Saleh Ben Safar

    2017-12-01

    Full Text Available Smart home is a residential building that is usually new or modern equipped with necessary tools and wiring that enable its occupants to control a number of electrical devices and several household appliances through a suitable software. Recently, the development of home automation systems is accelerating rapidly as a result of the rapid intersection of modern technologies. Here we are talking about systems for home communication networks as well as entertainment, security, convenience, etc. These systems are controlled by sending signals through wires distributed throughout the house or Through wireless means to programmable keys or devices so that they understand these commands and deal with them as desired. In this paper, I will discuss how to design the circuit with appropriate components, build it in Printed Circuit Board and connect it to a personal computer by using programmable language in order to control all home appliances by just one click. 

  8. Guidance for NAMA Design - building on country experiences

    DEFF Research Database (Denmark)

    Lütken, Søren; Dransfeld, Bjoern; Wehner, Stefan

    Nationally Appropriate Mitigation Actions (NAMAs) represent a valuable opportunity for developing countries to address greenhouse gas (GHG) emissions while remaining true to their sustainable development priorities and needs. Many countries are already taking steps to use NAMAs as instruments...... to produce this guidebook, which will assist developing countries in formulating more effective NAMAs. Initially conceived as part of UNDP’s Low Emission Capacity Building (LECB) Programme and funded by the European Commission and the governments of Germany and Australia, the guidebook has been expanded...... in scope, thanks to this later strategic partnership. It should benefit any government or institution that wishes to participate in NAMA development. This NAMA Guide is designed to build on countries’ relevant work in developing mitigation actions, for instance through their National Communications...

  9. Building Design Variables Usage as a Tool of Value Engineering During Designing

    Directory of Open Access Journals (Sweden)

    Sahid Nur

    2017-01-01

    Full Text Available The deployment of construction economics has become more desirable today, mainly due to need to establish how building costs are spent, and be able to come up with the most optimum alternatives. This research article therefore, explored 1 the various costs inputs called design variables used by design consultants, plus their underlying factors, 2 how the practice of value engineering (VE impacts on projects in Indonesia. A qualitative methodology, was used inform of a questionnaire, designed based on a 5 pointer liker scale approach, and distributed among 30 respondents consisting of consultants and clients in areas of Surakarta. The collected data was processed using statistical method of relative importance index, followed by descriptive analysis inform of bar and pie charts. The results obtained were that building plane shape (index 83.2, was mostly used, which itself depended on external features of building membrane and shape of building site (80.0 each, then other variables were building complexity (82.1; and building façade (77.9, meanwhile the least used was sharing walls (index 62.1, Lastly, VE was found to benefit the industry by producing designs which meet time, cost and quality targets, on the other hand material wastages and loss of confidence was reported once VE was neglected.

  10. Procedural Design of Exterior Lighting for Buildings with Complex Constraints

    KAUST Repository

    Schwarz, Michael

    2014-10-01

    We present a system for the lighting design of procedurally modeled buildings. The design is procedurally specified as part of the ordinary modeling workflow by defining goals for the illumination that should be attained and locations where luminaires may be installed to realize these goals. Additionally, constraints can be modeled that make the arrangement of the installed luminaires respect certain aesthetic and structural considerations. From this specification, the system automatically generates a lighting solution for any concrete model instance. The underlying, intricate joint optimization and constraint satisfaction problem is approached with a stochastic scheme that operates directly in the complex subspace where all constraints are observed. To navigate this subspace efficaciously, the actual lighting situation is taken into account. We demonstrate our system on multiple examples spanning a variety of architectural structures and lighting designs. Copyright held by the Owner/Author.

  11. Zero Energy BuildingsDesign Principles and Built Examples

    DEFF Research Database (Denmark)

    Bejder, Anne Kirkegaard; Knudstrup, Mary-Ann; Jensen, Rasmus Lund

    Designing a zero energy building is a complicated task, and in order to achieve good results it is necessary to include knowledge from a range of sources. Therefore, cooperation is required between different professions and between generalists and specialists from the very beginning of the process...... for the development of zero energy houses. These strategies and technologies are illustrated through simple design principles and built examples • identify technical and architectural potentials and challenges related to design strategies of crucial importance to the development of zero energy houses • identify...... technical and architectural potentials and challenges related to the application of new technologies • make visible engineering and architectural issues and create greater transparency, providing a point of departure for cross-disciplinary cooperation....

  12. Design of energy efficient building with radiant slab cooling

    Science.gov (United States)

    Tian, Zhen

    2007-12-01

    Air-conditioning comprises a substantial fraction of commercial building energy use because of compressor-driven refrigeration and fan-driven air circulation. Core regions of large buildings require year-round cooling due to heat gains from people, lights and equipment. Negative environmental impacts include CO2 emissions from electric generation and leakage of ozone-depleting refrigerants. Some argue that radiant cooling simultaneously improves building efficiency and occupant thermal comfort, and that current thermal comfort models fail to reflect occupant experience with radiant thermal control systems. There is little field evidence to test these claims. The University of Calgary's Information and Communications Technology (ICT) Building, is a pioneering radiant slab cooling installation in North America. Thermal comfort and energy performance were evaluated. Measurements included: (1) heating and cooling energy use, (2) electrical energy use for lighting and equipment, and (3) indoor temperatures. Accuracy of a whole building energy simulation model was evaluated with these data. Simulation was then used to compare the radiant slab design with a conventional (variable air volume) system. The radiant system energy performance was found to be poorer mainly due to: (1) simultaneous cooling by the slab and heating by other systems, (2) omission of low-exergy (e.g., groundwater) cooling possible with the high cooling water temperatures possible with radiant slabs and (3) excessive solar gain and conductive heat loss due to the wall and fenestration design. Occupant thermal comfort was evaluated through questionnaires and concurrent measurement of workstation comfort parameters. Analysis of 116 sets of data from 82 occupants showed that occupant assessment was consistent with estimates based on current thermal comfort models. The main thermal comfort improvements were reductions in (1) local discomfort from draft and (2) vertical air temperature stratification. The

  13. Rapid prototyping in order to improve building performance simulation for detailed design support

    NARCIS (Netherlands)

    Hopfe, C.J.; Hensen, J.L.M.; Stankov, P.

    2006-01-01

    Building performance simulation (BPS) is a powerful tool to support building and system designers in emulating how orientation, building type, HVAC system etc. interacts the overall building performance. Currently BPS is used only for code compliance in the detailed design, neither to make informed

  14. Complete self-sufficiency planning: designing and building disaster-ready hospitals.

    Science.gov (United States)

    Brands, Chad K; Hernandez, Raquel G; Stenberg, Arnold; Carnes, Gary; Ellen, Jonathan; Epstein, Michael; Strouse, Timothy

    2013-01-01

    The need for healthcare systems and academic medical centers to be optimally prepared in the event of a disaster is well documented. Events such as Hurricane Katrina demonstrate a major gap in disaster preparedness for at-risk medical institutions. To address this gap, we outline the components of complete self-sufficiency planning in designing and building hospitals that will function at full operational capacity in the event of a disaster. We review the processes used and outcomes achieved in building a new critical access, freestanding children's hospital in Florida. Given that hurricanes are the most frequently occurring natural disaster in Florida, the executive leadership of our hospital determined that we should be prepared for worst-case scenarios in the design and construction of a new hospital. A comprehensive vulnerability assessment was performed. A building planning process that engaged all of the stakeholders was used during the planning and design phases. Subsequent executive-level review and discussions determined that a disaster would require the services of a fully functional hospital. Lessons learned from our own institution's previous experiences and those of medical centers involved in the Hurricane Katrina disaster were informative and incorporated into an innovative set of hospital design elements used for construction of a new hospital with full operational capacity in a disaster. A freestanding children's hospital was constructed using a new framework for disaster planning and preparedness that we have termed complete self-sufficiency planning. We propose the use of complete self-sufficiency planning as a best practice for disaster preparedness in the design and construction of new hospital facilities.

  15. Innovation

    African Journals Online (AJOL)

    The purpose of Innovation journal of appropriate librarianship and information work in Southern Africa is to publish material on libraries, information supply and other related matters in South and Southern Africa. Vol 45 (2012). DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ...

  16. Innovation

    DEFF Research Database (Denmark)

    Torfing, Jacob; Ricard, Lykke Margot

    2017-01-01

    Innovation i krydsfeltet mellem forskellige styringsparadigmer i offentlige organisationer. New Public Governance gør det muligt at skabe offentlig værdi på nye måder. Men NPG er ingen trylledrik, der fra den ene dag til den anden skaber balance mellem borgernes store forventninger og en trængt ø...

  17. Designing innovative education formats and how to fail well when doing so

    DEFF Research Database (Denmark)

    Petersen, Anne Kristine; Gundersen, Peter Bukovica

    In this article we explore the challenges of designing new, radical education formats from a design-­based research perspective. The article opens with a discussion of central challenges in organisational innovation with particular emphasis on innovation in educational institutions prompted by new...... education reforms. The different roles and functions assumed by the design researcher are also discussed, and it is argued that the role of the project manager should be reconsidered as exceedingly crucial in successful implementation of reform-driven educational innovation. The article draws on empirical...... findings from a recent reform-­driven innovation in the form of a MOOC (Massive Open Online Course), which offers courses to Danish primary and lower­-secondary school teachers in need of further training. The findings discussed in the article indicate that radical education innovations may be adversely...

  18. From Focus on Price to the Pyramid of Innovation, Information, Cooperation, Value and Trust: A Success Story of Five Swedish Building Material Manufacturers

    Directory of Open Access Journals (Sweden)

    Jan Sundquist

    2010-07-01

    Full Text Available This is a reprint from vol 8 no 2 which has not previously beeen available electronically.In the building sector, value for the customer, is often regarded as being value for money and this, in turn, is achieved by means of competitive tendering. However, there are companies that also focus on innovation as a competitive parameter in their contribution; hereafter referred to as innovative companies. Five managing directors from innovative companies in Sweden were interviewed about how innovation is dealt with in their respective companies. As well as the importance of information, this study points to two additional important factors for innovation, namely cooperation with a carefully chosen partner and the transference of values to the employees. Those innovative companies made careful choices and use means of information, cooperation, value and vision to create innovation in order to build trust for the company and for its products and services.

  19. From Focus on Price to the Pyramid of Innovation, Information, Cooperation, Value and Trust: A Success Story of Five Swedish Building Material Manufacturers

    Directory of Open Access Journals (Sweden)

    Jan Sundquist

    2010-07-01

    In the building sector, value for the customer, is often regarded as being value for money and this, in turn, is achieved by means of competitive tendering. However, there are companies that also focus on innovation as a competitive parameter in their contribution; hereafter referred to as innovative companies. Five managing directors from innovative companies in Sweden were interviewed about how innovation is dealt with in their respective companies. As well as the importance of information, this study points to two additional important factors for innovation, namely cooperation with a carefully chosen partner and the transference of values to the employees. Those innovative companies made careful choices and use means of information, cooperation, value and vision to create innovation in order to build trust for the company and for its products and services.

  20. Complexity in Design-Driven Innovation: A Case Study of Knowledge Transfer Flow in Subsea Seismic Sensor Technology and Design Education

    Science.gov (United States)

    Pavel, Nenad; Berg, Arild

    2015-01-01

    To the extent previously claimed, concept exploration is not the key to product innovation. However, companies that are design-focused are twice as innovative as those that are not. To study design-driven innovation and its occurrence in design education, two case studies are conducted. The first is an example of design practice which includes…