WorldWideScience

Sample records for innovation industrial stakes

  1. Reduction of emissions and geological storage of CO2. Innovation an industrial stakes

    International Nuclear Information System (INIS)

    Mandil, C.; Podkanski, J.; Socolow, R.; Dron, D.; Reiner, D.; Horrocks, P.; Fernandez Ruiz, P.; Dechamps, P.; Stromberg, L.; Wright, I.; Gazeau, J.C.; Wiederkehr, P.; Morcheoine, A.; Vesseron, P.; Feron, P.; Feraud, A.; Torp, N.T.; Christensen, N.P.; Le Thiez, P.; Czernichowski, I.; Hartman, J.; Roulet, C.; Roberts, J.; Zakkour, P.; Von Goerne, G.; Armand, R.; Allinson, G.; Segalen, L.; Gires, J.M.; Metz, B.; Brillet, B.

    2005-01-01

    An international symposium on the reduction of emissions and geological storage of CO 2 was held in Paris from 15 to 16 September 2005. The event, jointly organized by IFP, ADEME and BRGM, brought together over 400 people from more than 25 countries. It was an opportunity to review the international stakes related to global warming and also to debate ways of reducing CO 2 emissions, taking examples from the energy and transport sectors. The last day was dedicated to technological advances in the capture and geological storage of CO 2 and their regulatory and economic implications. This document gathers the available transparencies and talks presented during the colloquium: Opening address by F. Loos, French Minister-delegate for Industry; Session I - Greenhouse gas emissions: the international stakes. Outlook for global CO 2 emissions. The global and regional scenarios: Alternative scenarios for energy use and CO 2 emissions until 2050 by C. Mandil and J. Podkanski (IEA), The stabilization of CO 2 emissions in the coming 50 years by R. Socolow (Princeton University). Evolution of the international context: the stakes and 'factor 4' issues: Costs of climate impacts and ways towards 'factor 4' by D. Dron (ENS Mines de Paris), CO 2 emissions reduction policy: the situation in the United States by D. Reiner (MIT/Cambridge University), Post-Kyoto scenarios by P. Horrocks (European Commission), Possibilities for R and D in CO 2 capture and storage in the future FP7 program by P. Fernandez Ruiz and P. Dechamps (European Commission). Session II - CO 2 emission reductions in the energy and transport sectors. Reducing CO 2 emissions during the production and conversion of fossil energies (fixed installations): Combined cycles using hydrogen by G. Haupt (Siemens), CO 2 emission reductions in the oil and gas industry by I. Wright (BP). Reducing CO 2 emissions in the transport sector: Sustainable transport systems by P. Wiederkehr (EST International), The prospects for reducing

  2. Capture and geological storage of CO2. Innovation, industrial stakes and realizations

    International Nuclear Information System (INIS)

    Lavergne, R.; Podkanski, J.; Rohner, H.; Otter, N.; Swift, J.; Dance, T.; Vesseron, Ph.; Reich, J.P.; Reynen, B.; Wright, L.; Marliave, L. de; Stromberg, L.; Aimard, N.; Wendel, H.; Erdol, E.; Dino, R.; Renzenbrink, W.; Birat, J.P.; Czernichowski-Lauriol, I.; Christensen, N.P.; Le Thiez, P.; Paelinck, Ph.; David, M.; Pappalardo, M.; Moisan, F.; Marston, Ph.; Law, M.; Zakkour, P.; Singer, St.; Philippe, Th.; Philippe, Th.

    2007-01-01

    The awareness of the international community and the convergence of scientific data about the global warming confirm the urgency of implementing greenhouse gases abatement technologies at the world scale. The growth of world energy demand will not allow to rapidly get rid of the use of fossil fuels which are the main sources of greenhouse gases. Therefore, the capture and disposal of CO 2 is a promising way to conciliate the use of fossil fuels and the abatement of pollutants responsible for the global warming. The economical and industrial stakes of this technique are enormous. In front of the success of a first international colloquium on this topic held in Paris in 2005, the IFP, the BRGM and the Ademe have jointly organized a second colloquium in October 2007, in particular to present the first experience feedbacks of several pilot experiments all over the world. This document gathers the transparencies of 27 presentations given at this colloquium and dealing with: the 4. IPCC report on the stakes of CO 2 capture and storage; the factor 4: how to organize the French economy transition from now to 2050; the technology perspectives, scenarios and strategies up to 2050; the European technological platform on 'zero-emission thermal plants'; the CO 2 capture and storage road-map in the USA; research, development and implementation of CO 2 capture and storage in Australia; the Canadian experience; ten years of CO 2 capture and storage in Norway; the In Salah operations (Algeria); CO 2 capture and storage: from vision to realisation; the oxi-combustion and storage pilot unit of Lacq (France); the Altmark gas field (Germany): analysis of CO 2 capture and storage potentialities in the framework of a gas assisted recovery project; oil assisted recovery and CO 2 related storage activities in Brazil: the Buracica and Miranga fields experience; carbon capture and storage, an option for coal power generation; steel-making industries and their CO 2 capture and storage needs

  3. CO2 emissions abatement and geologic sequestration - industrial innovations and stakes - status of researches in progress

    International Nuclear Information System (INIS)

    2005-01-01

    This colloquium was jointly organized by the French institute of petroleum (IFP), the French agency of environmental and energy mastery (Ademe) and the geological and mining research office (BRGM). This press kit makes a status of the advances made in CO 2 emissions abatement and geological sequestration: technological advances of CO 2 capture and sequestration, geological reservoir dimensioning with respect to the problem scale, duration of such an interim solution, CO 2 emissions abatement potentialities of geological sequestration, regulatory, economical and financial implications, international stakes of greenhouse gas emissions. This press kit comprises a press release about the IFP-Ademe-BRGM colloquium, a slide presentation about CO 2 abatement and sequestration, and four papers: a joint IFP-Ademe-BRGM press conference, IFP's answers to CO 2 emissions abatement, Ademe's actions in CO 2 abatement and sequestration, and BRGM's experience in CO 2 sequestration and climatic change expertise. (J.S.)

  4. Capture and geological storage of CO{sub 2}. Innovation, industrial stakes and realizations; Captage et stockage geologique du CO{sub 2}. Innovation, enjeux industriels et realisations

    Energy Technology Data Exchange (ETDEWEB)

    Lavergne, R.; Podkanski, J.; Rohner, H.; Otter, N.; Swift, J.; Dance, T.; Vesseron, Ph.; Reich, J.P.; Reynen, B.; Wright, L.; Marliave, L. de; Stromberg, L.; Aimard, N.; Wendel, H.; Erdol, E.; Dino, R.; Renzenbrink, W.; Birat, J.P.; Czernichowski-Lauriol, I.; Christensen, N.P.; Le Thiez, P.; Paelinck, Ph.; David, M.; Pappalardo, M.; Moisan, F.; Marston, Ph.; Law, M.; Zakkour, P.; Singer, St.; Philippe, Th.; Philippe, Th

    2007-07-01

    The awareness of the international community and the convergence of scientific data about the global warming confirm the urgency of implementing greenhouse gases abatement technologies at the world scale. The growth of world energy demand will not allow to rapidly get rid of the use of fossil fuels which are the main sources of greenhouse gases. Therefore, the capture and disposal of CO{sub 2} is a promising way to conciliate the use of fossil fuels and the abatement of pollutants responsible for the global warming. The economical and industrial stakes of this technique are enormous. In front of the success of a first international colloquium on this topic held in Paris in 2005, the IFP, the BRGM and the Ademe have jointly organized a second colloquium in October 2007, in particular to present the first experience feedbacks of several pilot experiments all over the world. This document gathers the transparencies of 27 presentations given at this colloquium and dealing with: the 4. IPCC report on the stakes of CO{sub 2} capture and storage; the factor 4: how to organize the French economy transition from now to 2050; the technology perspectives, scenarios and strategies up to 2050; the European technological platform on 'zero-emission thermal plants'; the CO{sub 2} capture and storage road-map in the USA; research, development and implementation of CO{sub 2} capture and storage in Australia; the Canadian experience; ten years of CO{sub 2} capture and storage in Norway; the In Salah operations (Algeria); CO{sub 2} capture and storage: from vision to realisation; the oxi-combustion and storage pilot unit of Lacq (France); the Altmark gas field (Germany): analysis of CO{sub 2} capture and storage potentialities in the framework of a gas assisted recovery project; oil assisted recovery and CO{sub 2} related storage activities in Brazil: the Buracica and Miranga fields experience; carbon capture and storage, an option for coal power generation; steel

  5. Capture and geological storage of CO{sub 2}. Innovation, industrial stakes and realizations; Captage et stockage geologique du CO{sub 2}. Innovation, enjeux industriels et realisations

    Energy Technology Data Exchange (ETDEWEB)

    Lavergne, R; Podkanski, J; Rohner, H; Otter, N; Swift, J; Dance, T; Vesseron, Ph; Reich, J P; Reynen, B; Wright, L; Marliave, L de; Stromberg, L; Aimard, N; Wendel, H; Erdol, E; Dino, R; Renzenbrink, W; Birat, J P; Czernichowski-Lauriol, I; Christensen, N P; Le Thiez, P; Paelinck, Ph; David, M; Pappalardo, M; Moisan, F; Marston, Ph; Law, M; Zakkour, P; Singer, St; Philippe, Th; Philippe, Th

    2007-07-01

    The awareness of the international community and the convergence of scientific data about the global warming confirm the urgency of implementing greenhouse gases abatement technologies at the world scale. The growth of world energy demand will not allow to rapidly get rid of the use of fossil fuels which are the main sources of greenhouse gases. Therefore, the capture and disposal of CO{sub 2} is a promising way to conciliate the use of fossil fuels and the abatement of pollutants responsible for the global warming. The economical and industrial stakes of this technique are enormous. In front of the success of a first international colloquium on this topic held in Paris in 2005, the IFP, the BRGM and the Ademe have jointly organized a second colloquium in October 2007, in particular to present the first experience feedbacks of several pilot experiments all over the world. This document gathers the transparencies of 27 presentations given at this colloquium and dealing with: the 4. IPCC report on the stakes of CO{sub 2} capture and storage; the factor 4: how to organize the French economy transition from now to 2050; the technology perspectives, scenarios and strategies up to 2050; the European technological platform on 'zero-emission thermal plants'; the CO{sub 2} capture and storage road-map in the USA; research, development and implementation of CO{sub 2} capture and storage in Australia; the Canadian experience; ten years of CO{sub 2} capture and storage in Norway; the In Salah operations (Algeria); CO{sub 2} capture and storage: from vision to realisation; the oxi-combustion and storage pilot unit of Lacq (France); the Altmark gas field (Germany): analysis of CO{sub 2} capture and storage potentialities in the framework of a gas assisted recovery project; oil assisted recovery and CO{sub 2} related storage activities in Brazil: the Buracica and Miranga fields experience; carbon capture and storage, an option for coal power generation; steel-making industries

  6. Reduction of emissions and geological storage of CO{sub 2}. Innovation an industrial stakes; Reduction des emissions et stockage geologique du CO{sub 2}. Innovation et enjeux industriels

    Energy Technology Data Exchange (ETDEWEB)

    Mandil, C.; Podkanski, J.; Socolow, R.; Dron, D.; Reiner, D.; Horrocks, P.; Fernandez Ruiz, P.; Dechamps, P.; Stromberg, L.; Wright, I.; Gazeau, J.C.; Wiederkehr, P.; Morcheoine, A.; Vesseron, P.; Feron, P.; Feraud, A.; Torp, N.T.; Christensen, N.P.; Le Thiez, P.; Czernichowski, I.; Hartman, J.; Roulet, C.; Roberts, J.; Zakkour, P.; Von Goerne, G.; Armand, R.; Allinson, G.; Segalen, L.; Gires, J.M.; Metz, B.; Brillet, B

    2005-07-01

    An international symposium on the reduction of emissions and geological storage of CO{sub 2} was held in Paris from 15 to 16 September 2005. The event, jointly organized by IFP, ADEME and BRGM, brought together over 400 people from more than 25 countries. It was an opportunity to review the international stakes related to global warming and also to debate ways of reducing CO{sub 2} emissions, taking examples from the energy and transport sectors. The last day was dedicated to technological advances in the capture and geological storage of CO{sub 2} and their regulatory and economic implications. This document gathers the available transparencies and talks presented during the colloquium: Opening address by F. Loos, French Minister-delegate for Industry; Session I - Greenhouse gas emissions: the international stakes. Outlook for global CO{sub 2} emissions. The global and regional scenarios: Alternative scenarios for energy use and CO{sub 2} emissions until 2050 by C. Mandil and J. Podkanski (IEA), The stabilization of CO{sub 2} emissions in the coming 50 years by R. Socolow (Princeton University). Evolution of the international context: the stakes and 'factor 4' issues: Costs of climate impacts and ways towards 'factor 4' by D. Dron (ENS Mines de Paris), CO{sub 2} emissions reduction policy: the situation in the United States by D. Reiner (MIT/Cambridge University), Post-Kyoto scenarios by P. Horrocks (European Commission), Possibilities for R and D in CO{sub 2} capture and storage in the future FP7 program by P. Fernandez Ruiz and P. Dechamps (European Commission). Session II - CO{sub 2} emission reductions in the energy and transport sectors. Reducing CO{sub 2} emissions during the production and conversion of fossil energies (fixed installations): Combined cycles using hydrogen by G. Haupt (Siemens), CO{sub 2} emission reductions in the oil and gas industry by I. Wright (BP). Reducing CO{sub 2} emissions in the transport sector: Sustainable

  7. Innovations in Hospitality Industry

    Science.gov (United States)

    Dzhandzhugazova, Elena A.; Blinova, Ekaterina A.; Orlova, Liubov N.; Romanova, Marianna M.

    2016-01-01

    The article focuses on the study of the role and importance of innovation, its classification, the problems of its application in the hotel industry with emphasis on the application of sensory marketing tools in the development of the innovative marketing mix within the hospitality industry. The article provides an analysis of the "seven…

  8. CO{sub 2} emissions abatement and geologic sequestration - industrial innovations and stakes - status of researches in progress; Reduction des emissions et stockage geologique du CO{sub 2} - innovation et enjeux industriels - le point des recherches en cours

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This colloquium was jointly organized by the French institute of petroleum (IFP), the French agency of environmental and energy mastery (Ademe) and the geological and mining research office (BRGM). This press kit makes a status of the advances made in CO{sub 2} emissions abatement and geological sequestration: technological advances of CO{sub 2} capture and sequestration, geological reservoir dimensioning with respect to the problem scale, duration of such an interim solution, CO{sub 2} emissions abatement potentialities of geological sequestration, regulatory, economical and financial implications, international stakes of greenhouse gas emissions. This press kit comprises a press release about the IFP-Ademe-BRGM colloquium, a slide presentation about CO{sub 2} abatement and sequestration, and four papers: a joint IFP-Ademe-BRGM press conference, IFP's answers to CO{sub 2} emissions abatement, Ademe's actions in CO{sub 2} abatement and sequestration, and BRGM's experience in CO{sub 2} sequestration and climatic change expertise. (J.S.)

  9. Scenarios for transition towards a low-carbon world in 2050: What's at stake for heavy industries?

    International Nuclear Information System (INIS)

    2008-11-01

    Launched in 2004, the study Scenarios for transition towards a low-carbon world in 2050: What's at stake for heavy industries explores how major industrial sectors will be impacted by a carbon constraint stabilizing atmospheric CO 2 concentration at 450 ppm. By means of an innovative hybrid modelling platform and ongoing dialogue between researchers and industrialists, the study produces conclusions concerning both general climate policy as well as the economic response of industrial sectors - specifically of the steel, aluminium, cement, and sheet glass sectors, as well as of the energy sector. (authors)

  10. Innovation, Industry Evoluation and Employment

    NARCIS (Netherlands)

    D.B. Audretsch (David); A.R. Thurik (Roy)

    1999-01-01

    textabstractThe purpose of this paper is to introduce a series of articles on the links between innovation, the evolution of industry and employment. These relations provide the building blocks of a new industrial policy. The articles are included in Innovation, Industry Evolution and Employment

  11. Service Innovation in Industrial Contexts

    OpenAIRE

    Kowalkowski, Christian

    2016-01-01

    Both academics and practitioners emphasize the importance for product firms of pursuing service innovation. Despite a strategic focus on service-led growth, however, many firms struggle to succeed with their service innovation initiatives. In order to increase our understanding of the nature of service innovation in product firms, this chapter discusses the specificities in, and dynamics of, service offerings, service processes, and business models in industrial contexts. First, it outlines k...

  12. Industrialized Innovation: The Connection of Science & Technology Innovation with Industrial Innovation

    Institute of Scientific and Technical Information of China (English)

    Yinxing Hong; Yao Lu; Jianghuai Zheng

    2017-01-01

    In light of the relationship and the current disconnection between science & technology (S&T) innovation and industrial innovation in China,it is necessary to put forward and emphasize the concept of industrialized innovation.Industrialized innovation is the bridge and intermediation between S&T innovation and industrial innovation,which is not only a concept,but also a mechanism and combination force.There are two ways to achieve industrialized innovation:through industry-university-research coordination and through technology entrepreneurship.The meaning of industry-university-research coordination is not about coordination among industry,university and research sectors in an institutional sense;rather it is about the coordination of the functions of cultivation and development in new industries,new technologies,and new talents of industrialized innovation.The incentive mechanism for industrialized innovation should motivate not only innovation but also coordination.Technology entrepreneurship is the industrialization of new technology through business start-ups,which occurs beyond the stage of incubation and development of new technology.The capital of technology entrepreneurship is the set consisting of knowledge capital manifested through technological innovation,human capital manifested through entrepreneurs,and physical capital in the form of venture capital.While physical capital is indispensable,knowledge capital and human capital play the decisive role in technology entrepreneurship.The industrialization of technological innovation involves two requirements:one is to enable the new technology industry to achieve a large scale rapidly,and the other is to fully realize the potential value of the new technology.Both requirements are reliant on effective innovation in business models.

  13. The strategic industrial sectors of the green economy: stakes and perspectives

    International Nuclear Information System (INIS)

    Albertini, Jean-Paul; Larrieu, Catherine; Griot, Alain

    2013-03-01

    Proposing a transverse analysis and a synthesis, the first part of this voluminous report discusses the evolution of the context since 2009 for the green industry sector, outlines and comments the development stakes for the different sectors, analyses and comments their main evolutions for the last three years, outlines the development potential and perspectives of these activities in France, and proposes an overview of strategic policies implemented in the field of green economy in different countries (USA, Germany, United Kingdom, Japan, China, South Korea). The second part addresses the evolution and perspectives of each sector: energy production from renewable sources (biofuels, biomass, marine energies, wind energy, geothermal energy, solar energy), optimization of natural energy consumption (building with low environmental impact, green chemistry, hydrogen and fuel cells, biomaterials, optimization of industrial processes, smart grids, energy storage, low-carbon vehicles), natural resource life cycle management (CO 2 capture and storage, water, purification and ecologic engineering, metrology and instrumentation, recycling and waste valorization)

  14. Research of Innovation Diffusion on Industrial Networks

    Directory of Open Access Journals (Sweden)

    Yongtai Chen

    2014-01-01

    Full Text Available The real value of innovation consists in its diffusion on industrial network. The factors which affect the diffusion of innovation on industrial network are the topology of industrial network and rules of diffusion. Industrial network is a complex network which has scale-free and small-world characters; its structure has some affection on threshold, length of path, enterprise’s status, and information share of innovation diffusion. Based on the cost and attitude to risk of technical innovation, we present the “avalanche” diffusing model of technical innovation on industrial network.

  15. Perceptions of industrial and nuclear risks. Stakes, negotiations and social development of levels of risk acceptance

    International Nuclear Information System (INIS)

    Bernier, S.Ch.

    2007-11-01

    In this thesis we will question the perceptions of industrial risks in the occidental world at the beginning of the 21. century. For this purpose we will try to understand how concepts such as sustainable development, precautionary principle, liability, or even zero-risk bias have progressively developed around a thought model based on the scientific rationality. This model is now undermined by its incapacity to fully address the issues it raises and completely avoid the potential risks. However, despite consistent weaknesses, it remains a reference value moulded by past accidents which have led to the making of laws aiming mainly at defining liability and protecting those who are held liable. Thus, public information becomes a requirement for democracy and the protection of this thought model. In this context, the protagonists at stake are security-conscious, economical and political lobbies that constantly redefine the limits of risk acceptance. We come to the realization that our lifestyle and value system remain unchallenged even though undergoing a crisis. The specificity of this research lies into the importance we give to the local approach, dealing with registered Seveso sites and nuclear plants located in Indre et Loire. We have polled five categories of respondents through interviews or questionnaires in order to understand their opinion regarding situations involving technological risks. The result of this survey helps us understand and set the levels of risk acceptance that they define with regard to the industrial risks and show the complexity of a situation involving political stakes, environmental pressures, a profit-driven economy and security constraints, in a vague and complex context. This work gives us a contrasted picture of today's perceptions of risks. (author)

  16. Innovation in the fuel cycle industry

    International Nuclear Information System (INIS)

    Lamorlette, Guy

    1998-01-01

    The fuel cycle industry will have to adapt to the production of new fuel and in the same time will have to improve its performance. Innovation will be a key factor of success. Innovation must be driven by the needs of the fuel cycle industry to achieve. The fuel cycle requirement of tomorrow, Innovative processes for mining high grade uranium, Innovative enrichment process, Sorting the pellets at Melox plant, Innovation in action, and Innovative waste management in la Hague are presented. A number of innovative solutions are already implemented and are in action on industrial facilities. As problems are becoming more and more tough to address, international cooperation will be required. The fuel cycle industry, as a part of the nuclear power industry, is committed to seek improvements through performance upgrade and innovation. (Cho. G. S.). 10 refs., 4 figs

  17. KIBO Industry, innovates in aerospace

    Science.gov (United States)

    Paillard, Jean-Philippe

    2016-07-01

    The conquest of space is a true inspiration. Imagine a long-duration mission to a distant destination. What shall we take to produce our food? A cow, fish, chicken, or just eggs. In the current state of the animal production technologies are complicated and expensive to implement, except perhaps one: the breeding of edible insects. Based on this postulate KIBO in partnership with Space Agriculture Task Force and the university's department of Nutrition Nagoya most innovative research program is created in modern nutrition. This program is called Pegasus. Pegasus research program aims to develop food productions and modules applicable to the aerospace conquest. Kibo industry is the first entomocole production company creat in Europe to human food; it aims to become the world leader by 2020. Kibo industry is particularly specialized in producing entomosource (products with insects). The first phase of the program is to achieve an outcome cereal bar edible insect to aerospace. So we will present the issues and objectives of the project, for aerospace and us. Jean-Philippe Paillard is the KIBO industry CEO and Vice President of the FFPIDI insects farms federation. He is also the co computer alone authorization dossier on the market in Europe and therefore the privileged interlocutor of the General Directorate for Health and Customer Review on this topic. He intervened at the last conference on the insect organized by FAO in Wageningen and various universities in France.

  18. The Organisation of Innovative Activities Across Industries

    DEFF Research Database (Denmark)

    Drejer, Ina; Leiponen, Aija

    2003-01-01

    finds that not only are innovation modes very similar across manufacturing and service sectors, the same main modes are also identified in the two countries analysed. Furthermore, the innovation modes identified are very similar to the modes expressed in the well-known Pavitt Taxonomy. Second......, the relation between innovation modes and innovation outcome are investigated through regression analysis. The analysis confirms that the way innovation is organised matters for outcome, in terms of type of innovation, as well as in terms of share of sales stemming from innovation. Finally, we explore whether...... innovation modes are aligned with industry classifications, as it is assumed in the original work on technological regimes. Contrary to these assumptions we find that industries by no means are uniform in terms of organisation of innovation; in most cases two or three regimes are represented in a single...

  19. Industrial Innovation and Environmental Regulation: Developing ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2007-03-01

    Mar 1, 2007 ... Book cover Industrial Innovation and Environmental Regulation: ... in steering the behaviour of economic agents in industrial production. ... IDRC congratulates first cohort of Women in Climate Change Science Fellows.

  20. CREATIVE ECONOMY. DETERMINANTS AND STAKES OF CREATIVITY AND INNOVATION MANAGEMENT. REGIONAL INGRESSIONS

    Directory of Open Access Journals (Sweden)

    IVANOVICI MINA

    2009-05-01

    Full Text Available Within the framework of creative economy the creative and innovative management represents a strategic issue to consider when stimulating the enhancement of competitiveness among companies and countries. Creativity, innovation and new product development

  1. Innovation, Procurement and Construction Industry Development

    Directory of Open Access Journals (Sweden)

    Geard de Valence

    2010-12-01

    Full Text Available The implications for analysis of innovation in construction of theoretical developments in industrial organisation are considered in this research, as an attempt to outline a new approach to construction innovation incorporating the ideas found in knowledge based, technology centred models. The paper firstly summarises characteristics of the construction industry, focusing on their effects on innovation, before surveying some of the ideas about the sources of innovation and the expansion and application of knowledge. Construction can be seen as an industry with limited scope for knowledge externalities, where the procurement methods used by the industry’s clients do not pay for innovation. The following discussion uses recent developments in the research on the economics of innovation and industrial organization theory, such as research intensity and the endogenous sunk costs in competitive, fragmented, low research intensity industries. The effects on R&D of procurement methods and on industry structure are discussed, with a focus on the appropriability of innovations and the role of the client on the Heathrow Terminal 5 project. The paper concludes that the procurement methods used for building and construction projects appears to be a determining factor in the level of innovation in the construction industry

  2. Factors related to innovative output in the Dutch agrifood industry

    NARCIS (Netherlands)

    Batterink, M.H.; Wubben, E.F.M.; Omta, S.W.F.

    2006-01-01

    The present study assessed the factors related to innovative output in the Dutch agrifood industry, a scale-intensive, supplierdominated industry. We concentrated on explanatory variables related to cooperation, information sources, innovation objectives, obstacles to innovation, and innovation

  3. Innovation in the Food Industry

    NARCIS (Netherlands)

    Traill, W.B.; Meulenberg, M.T.G.

    2002-01-01

    Twelve food-manufacturing companies in six European countries have been studied with respect to the way in which they innovate, their motivations, and their emphasis on product or process innovation. It is suggested that the traditional demand-pull versus technology-push versus a mixture of both

  4. Innovation in the Danish Construction Industry

    DEFF Research Database (Denmark)

    Bonke, Sten; Bang, Henrik; Clausen, Lennie

    This report is concerned with public policy instruments, how they are used and to which degree they enhance innovativeness in the Danish construction sector.The report is written as a Danish response to the first of three thematic questions raised in CIB Task Group 35 on innovation systems...... in construction. The three themes are:A. Which current public policy instruments facilitate innovation in construction?B. What is the role of knowledge brokers in the innovation process?C. How does the client-industry interface influence innovation?...

  5. Industrial Property in the Commercialization of Innovations

    Directory of Open Access Journals (Sweden)

    Demyanchuk, G.

    2014-09-01

    Full Text Available The analysis of the investigations on creation of industrial property rights, the reasons which constrained their development and their role in the commercialization of innovation are presented.

  6. Addressing Responsible Research and Innovation to Industry

    DEFF Research Database (Denmark)

    Yaghmaei, Emad

    2015-01-01

    Responsible research and innovation (RRI) is taking a role to assist all types of stakeholders including industry to move research and innovation initiatives to responsible manner for tackling grand challenges. The literature on RRI focuses little on how industry can implement RRI principles...... models of corporate social responsibility (CSR) literature. Drawing on these models, this study develops stages and dimensions of RRI for discussing why industry should become engaged in RRI, how industry can embed RRI principles into research and innovation processes, how companies progress from one RRI....... In solving such gap in the literature, this article constructs a solid framework that provides a conceptual starting point for future research on levels of RRI. It draws a fundamental path to align industrial activities with environmental and societal needs. The framework develops a normatively grounded...

  7. Wheat Industry: Which Factors Influence Innovation?

    Directory of Open Access Journals (Sweden)

    Vitor Francisco Dalla Corte

    2015-10-01

    Full Text Available A change in the profile of food consumption is occurring because of the new context of demographic growth, the increase of income in developing economies, and urbanization. In Brazil, consumption patterns have trended from fresh to processed food and internal and external growth in demand has led to opportunities that require new and higher levels of technological innovation and associated managerial skill. The aim of this study was to evaluate the role of innovation on a key Brazilian food industry: wheat product markets. Results showed that while most firms did not innovate in the past year, new investments in R&D were important for innovation to occur compared to other factors such as the size of the company, the integration in supply chain, and the age of the company. These results demonstrate that innovation is not a random or unpredictable process, but a complex and diverse process that may be specific to each industry.

  8. Innovation, learning and industrial organisation

    NARCIS (Netherlands)

    Nooteboom, B

    Innovation, learning and organisation are analysed from a perspective which seeks to integrate evolutionary economics, the resource/competence view of the firm, an extended theory of transaction costs and insights derived from cognitive science. Firms are subject to selection by competitive forces,

  9. Industrial Innovation and Environmental Regulation: Developing ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    What role should governments play in protecting the environment and controlling the environmental impacts of industry? Do regulations benefit the environment, and how do they affect industrial innovation? Since the modern era of environmental management began in the early 1970s, regulations have been used with ...

  10. Union innovation in Ontario's nuclear industry

    International Nuclear Information System (INIS)

    MacKinnon, D.

    2003-01-01

    Over the last decade the Power Worker's Union (PWU) has embarked on a number of innovative approaches that have provided significant benefit to the nuclear industry. These include advanced labour relations approaches, equity participation and groundbreaking skills training initiatives. This presentation outlines these and other initiatives in the context of the union's view of the nuclear generation industry's future. (author)

  11. Venture Capital and Industrial ''Innovation''

    OpenAIRE

    Hirukawa, Masayuki; Ueda, Masako

    2008-01-01

    For the sample period of 1965-1992, Kortum and Lerner (2000) find that venture capital (VC) investments have a positive impact on patent count at industry level, and this impact is larger than that of R&D expenditures. We confirm that this positive impact continued to be present and became even stronger in late 90s during which VC industry experienced an unprecedented growth. We then proceed to study if this positive impact of VC is also present on productivity growth, which is a measure of i...

  12. Efficiency of innovative technology in construction industry

    Science.gov (United States)

    Stverkova, H.; Vaclavik, V.

    2017-10-01

    The need for sustainability increasingly influences the development of new technologies, business processes and working practices. Innovations are an important part of all business processes. The aim of innovation is, in particular, to reduce the burden on the environment. The current trend in the construction industry is diamond rope cutting. The aim of the paper is to evaluate the most advanced technology for cutting and removing concrete structures in terms of efficiency.

  13. Cross-Industry Spatially Localized Innovation Networks

    Directory of Open Access Journals (Sweden)

    Aleksandr Evseevich Karlik

    2016-12-01

    Full Text Available This article’s objective is to develop conceptual approach to the study of key decision-making factors of cross-industry spatially localized innovation networks regularities by the application of quantitative and qualitative data of St. Petersburg Innovation and Technology Cluster of Machinery Manufacturing and Metalworking. The paper is based on the previous research findings which conclude that such networks have a set of opportunities and constraints for innovation. The hypothesis is that in the clusters, representing a special type of these networks, the spatial proximity partly offsets the negative impact of industrial distance. The authors propose a structural and logical model of strategic decision-making to analyze these effects on innovation. They specify network’s influences on performance: cognitive diversity; knowledge and expertise; structural autonomy and equivalence. The model is applied to spatially localized cross-industry cluster and then improved in accordance with the obtained results for accounting resource flows. It allowed to take into account the dynamics of innovation activity and to develop the practical implications in the particular business context. The analysis identified the peculiarities of spatially localized crossindustry innovation cooperation in perspective of the combinations of tangible resources, information and other intangible resources for the renewal of mature industries. The research results can be used in business as well as in industrial and regional economic policy. In the conclusion, the article outlines future research directions: a comprehensive empirical study with the analysis of data on the factors of cross-industry cooperation which were identified in this paper with testing of causal relations; the developing an approach to the study of spatially localized networks based on the exchange of primary resources in the economic system stability framework.

  14. Seven thematic sheets 'solar and building' to understand the stakes of solar for the building industry

    International Nuclear Information System (INIS)

    2016-01-01

    In order to highlight the interest of solar energy for building for commissioning clients and public authorities, in terms of quality and competitiveness, this document proposes seven sheets which respectively address: the positive energy building, the development of solar energy in buildings with local authorities, photovoltaic self-consumption, the competitiveness of solar PV, an offer of quality by professionals of the solar PV, the competitiveness of solar heating. Each sheet proposes an overview of stakes, technical solutions, and local or professional commitment, and formulates some proposals for the future

  15. Strategic alliances fit pattern of industry innovation

    International Nuclear Information System (INIS)

    Crump, J.G.

    1997-01-01

    The strategic alliance, vitally important as an isolated practice in the oil and gas business, also fits a broad pattern of innovation by which the industry is redefining itself for prosperity in a new energy age. The industry is experiencing a renaissance in almost every aspect, from technological breakthroughs to innovative business practices to new products and markets. An inevitable outgrowth of such rapid and fundamental change is an evolution in business relationships. The strategic alliance is at the forefront of this trend. Development of new relationships capitalizes on, and partly results from, enormous advances in technology and finance. The paper discusses new relationships, the outsourcing rage, integrating work flows, and technological advances

  16. Modernization of industrial enterprises and innovative implementation

    OpenAIRE

    У.M. Petrovych; V.Z. Borbulevych

    2016-01-01

    The aim of the article. The main objective of the domestic company is the development of new market mechanisms, the implementation of progressive reforms, formation of specialized structures supporting innovation-oriented management. The purpose of this paper is to develop a comprehensive approach to the principles of industrial enterprises modernization. Based on the goal, the main objectives of the study are: to identify the main objectives of modernization of industrial enterprises; to dev...

  17. Environmental Innovation Dynamics in the Automotive industry

    NARCIS (Netherlands)

    Kuik, O

    2006-01-01

    This paper addresses the innovation dynamics induced by environmental policy in the automotive industry. It examines car fuel efficiency programs in the EU, the US and Japan. It concludes that existing programs have not yet succeeded in promoting radical and breakthrough technologies, but that, at

  18. Mergers and innovation in the pharmaceutical industry.

    Science.gov (United States)

    Comanor, William S; Scherer, F M

    2013-01-01

    Conflicting trends confound the pharmaceutical industry. The productivity of pharmaceutical innovation has declined in recent years. At the same time, the cohort of large companies who are the leading engines of pharmaceutical R&D has become increasingly concentrated. The concurrent presence of these trends is not sufficient to determine causation. In response to lagging innovation prospects, some companies have sought refuge in mergers and acquisitions to disguise their dwindling prospects or gain R&D synergies. On the other hand, the increased concentration brought on by recent mergers may have contributed to the declining rate of innovation. In this paper, we consider the second of these causal relationships: the likely impact of the recent merger wave among the largest pharmaceutical companies on the rate of innovation. In other words, have recent mergers, which may have been taken in response to lagging innovation, represented a self-defeating strategy that only made industry outcomes worse? Copyright © 2012 Elsevier B.V. All rights reserved.

  19. Environmental Regulation and Innovation Dynamics in the Oil Tanker Industry

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Vidic-Perunovic, Jelena

    2012-01-01

    The maritime industry is widely seen as less permeable to innovation than other industries. However, the industry is now recognizing that demands for increased environment protection can only be achieved by more innovation.This study demonstrates that environmental innovation has played a signifi......The maritime industry is widely seen as less permeable to innovation than other industries. However, the industry is now recognizing that demands for increased environment protection can only be achieved by more innovation.This study demonstrates that environmental innovation has played...

  20. Expectations and disappointments of industrial innovations

    CERN Document Server

    Halevi, Gideon

    2017-01-01

    The Integrated Manufacturing System (IMS), Group Technology, Numerical Control, and Computer Aided Design (CAD) were four outstanding innovations that were one-time milestones of scientific industrial management. This book describes the expectations and disappointments of the common pitfalls of these ingenious ideas, which leads to understanding of their gradual disappearing, and proposes a way to restore these methods for long term utility and value. The first three innovations dominated the industry till the mid-1970s. Surprisingly, the reason for them being replaced is the same: research of the “routine” was misleading regardless of its ingenuity. In the fourth case, CAD does not support CAPP (Computer Aided Process Planning) and thus Numerical Control could no longer support developments of a system such as a flexible and automated factory. However, they incorporate many features in a specific resource instead within a manufacturing system. CAD technology and machining centers remain remarkable as a s...

  1. Industrial innovation based on fundamental physics

    International Nuclear Information System (INIS)

    Kogelschatz, Ulrich

    2002-01-01

    Industrial innovation frequently results from an improved understanding of basic physics. Scientific discoveries quite often lead to engineering inventions that have not been the target of the original investigations. Examples are given from the field of plasma physics and plasma technology. High voltage circuit breakers, ozone generators, high power CO 2 lasers, excimer lamps, and plasma display panels have profited substantially from initially purely scientific investigations. In the meantime they have reached multi-billion dollar market shares

  2. Strategic research field no.4, industrial innovations

    International Nuclear Information System (INIS)

    Kato, Chisachi

    2011-01-01

    'Kei'-supercomputer is planned to start its full-scale operation in about one year and a half. With this, High Performance Computing (HPC) is most likely to contribute not only to further progress in basic and applied sciences, but also to bringing about innovations in various fields of industries. It is expected to substantially shorten design time, drastically improve performance and/or liability of various industrial products, and greatly enhance safety of large-scale power plants. In this particle, six research themes, which are currently being prepared in this strategic research field, 'industrial innovations' so as to use 'Kei'-supercomputer as soon as it starts operations, will be briefly described regarding their specific goals and break-through that they are expected to bring about in industries. It is also explained how we have determined these themes. We are also planning several measures in order to promote widespread use of HPC including 'Kei'-supercomputer in industries, which will also be elaborated in this article. (author)

  3. Does Service Innovation Matter in High-Tech Industry

    Directory of Open Access Journals (Sweden)

    Chao-Hung Wang

    2014-05-01

    Full Text Available Service innovation has been found to be a major driver of innovation performance in service contexts. But this issue raises questions concerning the extent to which the relationship between market orientation and innovation performance holds in the high-tech industry. Relatively little research has examined how market orientation contributes to innovation performance through service innovation. We here report an empirical study of 235 Taiwanese high-tech firms to examine the influence of market orientation on service innovation and innovation performance. A noteworthy finding is that the impacts of customer orientation and competitor orientation on innovation performance are fully mediated by service innovation. However, service innovation does only partially mediate the relationship between inter-functional orientation and innovation performance. The findings of this study should help managers consider appropriate service innovation in high-tech industry.

  4. Implementation of the HNS Convention in the LNG Industry: Singularities, Stakes, Issues and GIIGNL Proposed Solutions

    International Nuclear Information System (INIS)

    2008-01-01

    The International Group of Liquefied Natural Gas Importers (GIIGNL) is a non-profit organization founded in December of 1971. It is composed of 56 member companies from 18 different countries across the world and involved in the importation of Liquefied Natural Gas. The main objective of the GIIGNL is to promote the development of activities related to LNG: purchasing, importing, processing, transportation, handling, re-gasification and various uses of LNG. For this purpose, the GIIGNL is particularly involved in promoting the state-of-the art technology in the LNG industry, in communicating about the economic fundamentals of the industry, in enhancing facility operations, in diversifying contractual techniques, and in developing industry positions to be taken in international agencies. As a member of the IOPC Fund since June 2007, the GIIGNL prepared this LNG overview in order to offer a better understanding to state delegations about this specific product and its market and to contribute to the debate on the implementation of the HNS Convention. the first chapter constitutes an introduction to the LNG Industry: presentation of an LNG Chain, overview of the global LNG trade and its growth rate, type of contracts, LNG tankers and technical transportation constraints, liquefaction and re-gasification plants around the world. The second chapter focuses on some singularities of the LNG industry that differentiate LNG from other Hazardous and Noxious Substances: LNG, a clean and unique product and activity, high standards and firm regulations concerning security and maritime safety, high level of investment required for an LNG chain, DES and FOB, the fundamental Incoterms of LNG sales and purchase. The third chapter presents the HNS Convention as potentially applicable to the LNG market: a two tier compensation regime - a new perspective for the LNG industry, a potential impact on LNG sales and purchase agreements, the importance of global HNS ratification within LNG

  5. Cross-industry innovation processes strategic implications for telecommunication companies

    CERN Document Server

    Hahn, Tobias

    2015-01-01

    Based on multiple case study analysis, focusing on scalable service innovation, the present study provides a practical process model that shall serve telecommunication companies as a guideline while conducting strategic cross-industry innovation projects. The findings also pay attention to characteristics in cross-industry collaboration, organizational preconditions and strategic deliberations and postulate propositions for present theoretical innovation process models.

  6. Industry characteristics management of innovative processes at the enterprises of light industry

    OpenAIRE

    Yusupov, Ulugbek

    2015-01-01

    This article considers the issues of innovative development and management of innovative processes in the knitting industry of Uzbekistan. Analyzed the main directions of innovative processes and provides recommendations for their management.

  7. Is it possible to recycle nuclear wastes? Costs, risks and stakes of the plutonium industry

    International Nuclear Information System (INIS)

    2009-01-01

    This document, published by the French association 'Sortir du nucleaire' (Get out of nuclear), gives some information on the chain reaction from uranium to plutonium, the difference between reprocessing (which does not reduce waste volumes but multiply waste types) and recycling, the high risks associated with plutonium transport, La Hague as the most dangerous nuclear site in France, reprocessing as the alibi for the French nuclear industry, Areva as an expert in propaganda, reprocessing as an absurd world strategy, plutonium as a fuel for proliferation, the myth of unlimited energy with the breeder reactors, and so on

  8. ENERGY MANAGEMENT INNOVATION IN THE US SKI INDUSTRY

    Science.gov (United States)

    Ski areas represent a unique opportunity to develop innovative energy management practices in an industrial setting. Through a unique synergy of onsite generation, preferably by renewable sources and innovative technologies, and the energy storage potential of exis...

  9. Formation of Innovative Infrastructure of the Industrial Sphere

    Directory of Open Access Journals (Sweden)

    M. Ya. Veselovsky

    2017-01-01

    Full Text Available Purpose: in article problems of formation of innovative infrastructure of the industrial sphere in the Russian Federation are investigated, her merits and demerits are considered. In the context of foreign experience the analysis of statistics of development of innovative infrastructure on the basis of which is carried out the main shortcomings constraining efficiency of her work are allocated. Among them lack of cooperation between the organizations of infrastructure, a gap between scientific sector and business community, lack of effective communications between participants of innovative process, information opacity, extremely insufficient financing, and also low demand for innovations from the industrial enterprises, lack of motivation at business to carry out financing of innovative projects. Authors offer mechanisms of formation and management of innovative infrastructure. The purpose of article is increase in efficiency of innovative infrastructure of the industrial sphere. Article tasks: to analyse a condition of innovative infrastructure of the industrial sphere in Russia; to study foreign experience of formation of innovative infrastructure; to reveal shortcomings of functioning of innovative infrastructure; to offer mechanisms of formation and management of innovative infrastructure of the industrial sphere. Methods: hen carrying out a research data of Rosstat, legislative and normative legal acts, state programs of development of innovative activities and the industrial sphere, fundamental and application-oriented works of authoritative scientists in the field of innovative development were the main sources of basic data. The research is based on theoretical methods of scientific knowledge, in particular use of methods of synthesis and deduction, and also methods of empirical knowledge for which allowed to open a range of a set of problems which hinder with innovative development of the industrial sphere. Results: the analysis of the

  10. Does Service Innovation Matter in High-Tech Industry?

    OpenAIRE

    Wang, Chao-Hung

    2014-01-01

    Service innovation has been found to be a major driver of innovation performance in service contexts. But this issue raises questions concerning the extent to which the relationship between market orientation and innovation performance holds in the high-tech industry. Relatively little research has examined how market orientation contributes to innovation performance through service innovation. We here report an empirical study of 235 Taiwanese high-tech firms to examine the influence of mark...

  11. Energy conservation in the industry. Innovators talking; Energiebesparing in de industrie. Innovators aan het woord

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Qualitative studies have been conducted of the results of completed projects focused on energy innovation, spread over the seven themes of the top sector Energy: Energy saving in industry, Energy conservation in the built environment, Gas, Bio-energy, Smart grids, Offshore Wind, Solar PV. This provides insight into the follow-up activities and lessons of some EOS (Energy Research Subsidy) completed projects with the aim to inspire, connect and strengthen the TKIs (Topconsortia for Knowledge and Innovation) and individual companies and researchers working on energy innovation. This report concerns the research on energy conservation in the industry [Dutch] Er is een kwalitatief onderzoek uitgevoerd naar de resultaten van afgeronde projecten gericht op energie-innovatie, verdeeld over de zeven thema's van de topsector Energie: Energiebesparing in de industrie; Energiebesparing in de gebouwde omgeving; Gas; Bio-energie; Smart grids; Wind op zee; Zon-pv. Daarmee wordt inzicht gegeven in de vervolgactiviteiten en lessen van een aantal afgesloten EOS-projecten (Energie Onderzoek Subsidie) met het oog op het inspireren, verbinden en versterken van de TKI's (Topconsortia voor Kennis en Innovatie) en individuele bedrijven en onderzoekers die werken aan energie-innovatie. Dit rapport betreft het onderzoek naar energiebesparing in de industrie.

  12. Energy conservation in the industry. Innovators talking; Energiebesparing in de industrie. Innovators aan het woord

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Qualitative studies have been conducted of the results of completed projects focused on energy innovation, spread over the seven themes of the top sector Energy: Energy saving in industry, Energy conservation in the built environment, Gas, Bio-energy, Smart grids, Offshore Wind, Solar PV. This provides insight into the follow-up activities and lessons of some EOS (Energy Research Subsidy) completed projects with the aim to inspire, connect and strengthen the TKIs (Topconsortia for Knowledge and Innovation) and individual companies and researchers working on energy innovation. This report concerns the research on energy conservation in the industry [Dutch] Er is een kwalitatief onderzoek uitgevoerd naar de resultaten van afgeronde projecten gericht op energie-innovatie, verdeeld over de zeven thema's van de topsector Energie: Energiebesparing in de industrie; Energiebesparing in de gebouwde omgeving; Gas; Bio-energie; Smart grids; Wind op zee; Zon-pv. Daarmee wordt inzicht gegeven in de vervolgactiviteiten en lessen van een aantal afgesloten EOS-projecten (Energie Onderzoek Subsidie) met het oog op het inspireren, verbinden en versterken van de TKI's (Topconsortia voor Kennis en Innovatie) en individuele bedrijven en onderzoekers die werken aan energie-innovatie. Dit rapport betreft het onderzoek naar energiebesparing in de industrie.

  13. Technological Innovation for China’s Logistics Industry

    Directory of Open Access Journals (Sweden)

    Chieh-Yu Lin

    2008-01-01

    Full Text Available China’s logistics industry has started to pay attention to adopt more efficient logistics technologies to provide better services for their customers. This paper employes the questionnaire survey to study the factors influencing the adoption of technological innovations by logistics service providers in China as well as the influences of technological innovation on supply chain performance. Technological innovations are categorized into data acquisition technologies, information technologies, warehousing technologies, and transportation technologies. The results show that the adoption of technological innovations is significantly influenced by technological, organizational and environmental factors, and adopting innovative technologies will increase supply chain performance for the logistics industry in China.

  14. Change and Innovation Leadership in an Industrial Digital Environment

    Directory of Open Access Journals (Sweden)

    Steude Dietrich H.

    2017-12-01

    Full Text Available With the high pace of digital innovation processes the risk of digital disruption increases for industrial companies. However, the progress in industrial digitalization accelerates the decision processes and relieves management from routine work. It gives room for creative management challenges like change and innovation processes. Team-oriented methods like Design Thinking are becoming a crucial part of the innovation culture. Industrial leadership must find current ways that are linked to creativity and to a coordinated human interaction. The article ties together the relevant literature and innovative ideas of digital tools, agile methodology and consequences for a flexible organizational structure.

  15. Managing innovation: lessons from the cardiac-pacing industry.

    Science.gov (United States)

    Gobeli, D H; Rudelius, W

    1985-01-01

    In this article, the authors argue that innovation is a surefire way for a firm to increase its sales and market share. This, in turn, can stimulate American industries and make American firms more competitive in international markets. Through their study of the cardiac-pacing industry, they draw conclusions about what factors contribute to a successful innovation in other industries besides medical electronics. They identify general patterns and stages of the innovation process, key roles top management must fill in an organization, and effective policies that foster important innovations.

  16. Enablers of Innovation in the Construction Material Industry

    DEFF Research Database (Denmark)

    Wandahl, Søren; Lassen, Astrid Heidemann; Jacobsen, Alexia

    2014-01-01

    , which creates a strong interdependence between the different supply network partners and can be seen as a hindrance for innovation. Innovation models must embrace such a contemporary business structures, where competition often takes place between supply chains rather than between individual companies......The construction material industry is often acknowledged as slightly more innovative than the overall construction industry and could hence serve as a valuable learning place for how innovation could flourish in the construction industry. Construction is viewed as network or supply chain based......, it was found that different approaches for facilitating this journey exists, based on company characteristics. This paper adds to the body of knowledge on how to succeed with innovation in the construction industry. The increased awareness of an open and cooperative approach to innovation is of value both...

  17. Innovation and productivity: empirical evidence for Brazilian industrial enterprises

    Directory of Open Access Journals (Sweden)

    Luciana Carvalho

    Full Text Available Abstract The aim of this paper is to carry out an empirical investigation into the relationship between innovation and the productive performance of Brazilian businesses measured by Work Productivity and Total Factor Productivity. Data taken from the Research of Innovation and estimated cross section models and panel data was used. The results suggest that innovation produces an incipient impact on competition in the national industry, reflected in the small magnitude of coefficients associated with the diverse indicators of innovation.

  18. Innovation and sectoral change in construction: The role of the industry paradigm and industry leaders

    NARCIS (Netherlands)

    Pries, F.; Vrijhoef, R.

    2004-01-01

    The construction industry appears to have serious problems to innovate effectively and incorporate innovative knowledge into firms’ businesses, despite the innovation potential and capacities of the industry. In the last decades several initiatives have been taken and many approaches have been

  19. Beyond product innovation; improving innovation policy support for SMEs in traditional industries

    NARCIS (Netherlands)

    Wintjes, R.J.M.; Douglas, D.; Fairburn, J.; Hollanders, H.J.G.M.; Pugh, G.

    2014-01-01

    Innovation support measures in the EU are mostly designed to support product innovation in R&D intensive sectors. To increase the still considerable contribution to regional employment and competitiveness from SMEs in traditional manufacturing industries a broader innovation (policy) mix is more

  20. INNOVATION LANDSCAPE AS PRIORITY CONDITION OF INDUSTRIAL AND TERRITORIAL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Y. A. Salikov

    2015-01-01

    Full Text Available A rational development of industrial territories and regions implies the improvement of their cooperation in economic sector of the country, perfecting the territorial structure of husbandry, rational exploration of natural resources, usage of promising technologies, mobilization of investment etc. Along with this, the improvement of the existing and formation of a new industrial manufacture structure should be implemented with consideration of key market aspects, connected with competitiveness and innovations. Thus, an important condition of industrial structure development is the formation of innovative landscape representing the entirety of innovative territorial subjects that use innovative technologies, management tools for creation the product. In narrow sense, innovative landscape can be understood as an integrative entirety of parameters including socio-economic conditions, state administrative body, innovative economic subjects, existence of innovative infrastructure and cluster interactions etc. A methodic approach to comparative estimation of industrial regions innovative landscape parameters considered in the article lets identify its state and structural characteristics with the purpose of making more reasonable decisions on productive forces location and o n the increase of innovativeness level of industrial territories and regions.

  1. Sustainable Innovation in the Dutch Construction Industry

    NARCIS (Netherlands)

    D. (Damon) Hassanpur Golriz; H.J. (Henk) Schout; dr. MBA S.J.M. (Saskia) Harkema

    2010-01-01

    Since the film of Al Gore An inconvenient truth, sustainability stands high on the national agenda of most countries. Concern for the environment is one of the main reasons in combination with opportunities to innovate. In general, innovation and entrepreneurship are important in the realm of

  2. Innovation, Learning Organizations and Industrial Relations

    DEFF Research Database (Denmark)

    Lundvall, Bengt-Åke; Peter Nielsen, Peter

    and indirect participation much more frequently than the rest. As more sectors become exposed to the need to engage in incremental product and service innovation the economic potential of diffusing good practices in terms of organization and participation is growing and needs to be reflected in firm strategies...... and public policies aiming at promoting innovation and knowledge creation....

  3. Innovation clusters and determinants of innovativeness in manufacturing industries

    NARCIS (Netherlands)

    Sevinç, M.; Ulusoy, G.

    2016-01-01

    Innovation is an important source of competitiveness and is studied extensively by both the academicians and the practitioners particularly in the last decades. This study is based on the results of an exploratory study conducted in the Northern Marmara region of Turkey covering 184 manufacturing

  4. METHODOLOGY TO EVALUATE THE INNOVATIVE ACTIVITY OF THE MEAT INDUSTRY

    Directory of Open Access Journals (Sweden)

    D. N. Bakaev

    2014-01-01

    Full Text Available The article considers the methods of estimation of innovative activity of the enterprise. Revealed advantages and disadvantages of the proposed techniques in various publications, devoted to the innovative development. Analysis of the works of domestic and foreign authors showed that the existing methods do not provide an adequate assessment of innovative activity of the enterprise. Asked to enter the integral indicator of innovative activity, which is the criterion of the dynamism of innovative activity of the enterprise, as measured by the speed and volume creation, promotion and use of innovations in economic activity of the enterprise. The proposed system of estimation of innovative activity of the enterprise is based on the following indicators: the ratio of personnel development, the growth rate of financial assets directed on conducting innovative activity of the enterprise, the coefficient for mastering new technologies, the growth rate of intellectual property. The assessment matrix integral indicator of innovative activity of the enterprise reflects the relationship of the indicators of innovative potential and innovative activity and includes a group of indicators, which allows the estimation of innovative activity of enterprises in various spheres of business: technological, organizational, marketing. The main advantages of the developed technique of estimation of level of innovative development of the enterprises of the meat industry is: an assessment of the level in dynamics; complex research of a level of innovation development; the possibility of comparison of actual values with the values of the indicators, assessments United experts. A feature of the proposed method is not only able to measure the level of innovation development in General, but diagnosis of individual factors. This allows you to determine which factors-the Torah must be activated to display the meat industry to a higher level of innovation development.

  5. Innovative and collaborative industrial mathematics in Europe

    DEFF Research Database (Denmark)

    Hjorth, Poul G.

    2017-01-01

    This paper presents a brief review of how industrial mathematics, inspired by the Oxford Study Group activity, organized itself in Europe, gave rise to the European Consortium for Mathematics in Industry, the series of European Study Groups with Industry, and to new modes of productive contacts b...... between industry and applied mathematicians in academia....

  6. Innovation in Norwegian industry and oil extraction in 1992

    International Nuclear Information System (INIS)

    Frengen, G.; Foyn, F.; Ragnarsoen, R.

    1995-01-01

    This report presents the first investigation of creativity - innovation - done by Statistics Norway. In 1992 companies in Norwegian industry and oil extraction expended 11,6 thousand million NOK in developing new or improved products and production processes. Most of the innovation was in research and development activities. Because of this creativity, improved products accounted for 22% of the total sales from the industry, and domestic trade comprised a higher share of product innovation than the export did. Innovations in small companies were relatively few, however, small companies had a higher share of improved products than the large innovative companies. The large companies were highly innovative in terms of innovation costs pr. employee and in that a large part of their total investments were made for innovation purposes. The small innovative companies committed themselves more to other activities than research and development than did the large ones, especially to marketing. Improved quality, capturing of market share and reduction of production time were the most important goals for the innovation activities. Customer relation and internal information sources were important for this process. Economic factors such as high costs and risk most strongly impeded innovation. 4 refs., 24 figs., 20 tabs

  7. Improving the Management of Innovative Development of Industrial Production According to Industry Specifics

    Directory of Open Access Journals (Sweden)

    Papizh Yuliia S.

    2018-03-01

    Full Text Available The problem of improvement of management efficiency of innovative development of industrial enterprises in modern economic conditions is indicated. The dynamics of innovative processes in Ukraine together with volumes of innovative activity of domestic enterprises are analyzed. The basic principles of formation and efficient functioning of the organizational-economic mechanism of innovative development of industrial production are substantiated. The branch specificity in management of innovative development of coal enterprises is identified. Directions of improvement of the organizational-economic mechanism of management of innovative development of enterprises of coal industry are defined. The basic principles of introduction of the mechanism for stimulation of innovative development of enterprises of coal industry are suggested.

  8. Innovative infrastructure of scientific-industrial cluster

    OpenAIRE

    SHEBEKO KONSTANTIN K

    2016-01-01

    Based on the analysis of problems of creation and functioning of innovation infrastructure in Belarus conclusions on the lack of its effectiveness are made. Main focus is given to the analysis of the practice of innovation infrastructure functioning, created on the basis of Polessky State University as a research university in order to perform technological modernization of the economy and the dissemination of effective business practices in Pripyat Polesye region in the form of scientific an...

  9. Radiological protection stakes and improvement in the radiopharmaceutical industry and transport: The example of Cis Bio International in France

    International Nuclear Information System (INIS)

    Poirson, L.; Ratsrahorana, A.

    2002-01-01

    The company CIS BIO International is located on the site of the nuclear research centre of Saclay and is the only company in France producing radioisotopes for medical use. Since January 2002 CIS BIO International became a subsidiary of the SCHERING group (100% of the share holdings). CIS BIO International has two nuclear facilities. the main one is making conception, manufacturing, packaging and trading of radioactive materials for medical (radiopharmaceutical) or industrial use. Regarding the huge amount of radioactive material circulating and being manipulated in the dispatching room, the workers in charge of packaging and the drives in charge of loading those packages into their vehicles are the most exposed to radiation hazards. Them the highest individual dose recorded by dosimeters film, over 12 months in the row, for workers in charge of jobs in the dispatching room, increased from 10.5 mSv in 2000 to 12,7 mSv in January 2002. In the new decree related to radiological protection of workers, in application of the 1996 Euratom directive, the whole body dose limit should decrease. In that context and regarding the dosimetric stakes, an ALARA study has been carried out in the dispatching room. This ALARA study is aimed to reach an optima value of the exposure of the workers in the dispatching room and, indirectly of the exposure of the drivers. In order to take into account all external constraints towards activities carried out in the dispatching room and to insure coherency and an exhaustive list of improvement options related to exposure, a description of all the input/output processes was realised, in addition to those concerning the dispatching room. As a matter of fact, those constraints due to the specific nature of the company are various. They are on the one hand related to regulations applied to the nuclear facilities, to the radioactive materials transportation in countries of transit and in the recipient countries and on the other hand, related to

  10. Accelerating nano-technological innovation in the Danish construction industry

    DEFF Research Database (Denmark)

    Koch, Christian; Stissing Jensen, Jens

    2007-01-01

    . The institutional features of the system are furthermore poorly equipped at identifying potentials within high-tech areas. In order to exploit the potentials of nano-technology it is thus argued that an alternative TIS needs to be established. Initiatives should identify and support "incubation rooms" or marked......  By viewing the construction industry as a technological innovation system (TIS) this paper discusses possible initiatives to accelerate nanotechnological innovations. The point of departure is a recent report on the application of nano-technology in the Danish construction industry, which...... concludes that opportunities are generally poorly appreciated by the industry and research communities alike. It is found that the construction industry is characterised by low-tech trajectories where dedicated innovation networks are often too fragile for innovations to stabilize and diffuse...

  11. Overcoming Barriers to Innovation in the Building Industry

    NARCIS (Netherlands)

    Heintz, J.L.; Wamelink, J.W.F.

    2015-01-01

    We live in an era of accelerated innovation. All around us we are immersed in a sea of new technologies and products that were very recently confined to comic books and science fiction tv-series. Yet in this storm of innovation the building industry seems to stand out for it's committed old

  12. Development Directions of Innovative Processes in Publishing and Printing Industry

    Directory of Open Access Journals (Sweden)

    Kotlyarevsky, Ya.V.

    2015-03-01

    Full Text Available Provision of innovative development of publishing and printing industry in the context of global trends is investigated. Generalized characteristic of organizational and economic relations arising due to development of publishing and printing spheres on the basis of innovation is presented; an attempt to evaluate their impact and the prospects for the national economy is made.

  13. Innovation by the wind power industry to meet government requirements

    International Nuclear Information System (INIS)

    Badger, D.

    2001-01-01

    This introductory paper to the Conference summarises suggestions for innovation in the wind power industry generally. Such innovation is needed as governments world-wide grapple with the demands of abating fossil fuel use in the face of the threat of Global Climate Change. As the major sponsor of the BWEA 22 Conference, Enron Wind Corp is conscious of the corporate responsibility of the modern wind power industry. (Author)

  14. THE INNOVATION ACTIVITY OF INDUSTRIAL ENTERPRISES IN UKRAINE: STATE AND TRENDS

    Directory of Open Access Journals (Sweden)

    O. Miroshnychenko

    2013-09-01

    Full Text Available The article includes analytical results of innovation activity of Ukrainian industrial enterprises. The enterprise innovation activity level, the level of innovations implementation into the Ukrainian industry has been researched. The dynamics of new innovation products and new technological products put into service, share of the innovation product sold in industrial output has been analysed. The level of the use of different types of innovation by industrial enterprises (marketing, organizational, process and product innovation has been determined. The main sources of finance for innovation activities have been considered. The dividing of innovation activity costs in industrial sector has been considered. The main problems of innovative development of the Ukrainian industry have been determined. The activity of industrial enterprises in Ukraine is characterized by a low level of innovation activity, an insufficient volume of realized innovative products, a low financing of innovation activity. The suggestions, which shall promote the effectiveness of innovation activity of Ukrainian industrial enterprises, have been put forward.

  15. Globalisation of innovation in knowledge intensive industries

    DEFF Research Database (Denmark)

    Chen, Yun-Chung; Vang, Jan; Chaminade, Cristina

    2012-01-01

    in developing countries: reduce research costs, access large markets, tap into a large pool of qualified human resources or benefit from knowledge spillovers available in the local/regional system of innovation. The empirical research presented in this paper reveals that none of these arguments can fully......The global location of R&D labs by MNCs is a rather new phenomenon; especially when it comes to establishing R&D labs in developing countries. The existing and rather limited literature on globalisation of innovation provides four possible explanations of why multinationals locate R&D labs...... countries such as China and thus calls for an integration in the regional innovation systems framework....

  16. Introduction of Innovations in the Tourism Industry: Experience of Ukraine

    Directory of Open Access Journals (Sweden)

    Alla Donysche-Medyanik

    2017-04-01

    Full Text Available The article deals with relevance and necessity of studying innovative processes in tourism industry as an important indicator of tourism development in the modern market conditions. Formulated and substantiated directions of innovative technologies introduction in the hospitality industry of Ukraine. Conducted research and substantiated principles of innovations in tourism and the processes in use of advanced services: Sleepbox, multimedia digital technologies Digital Signage, new technologies “Teleport” from the hotel network “Marriott”. Suggested a few ways to improve the service economy.

  17. Models for open innovation in the pharmaceutical industry.

    Science.gov (United States)

    Schuhmacher, Alexander; Germann, Paul-Georg; Trill, Henning; Gassmann, Oliver

    2013-12-01

    The nature of the pharmaceutical industry is such that the main driver for its growth is innovation. In view of the vast challenges that the industry has been facing for several years and, in particular, how to manage stagnating research and development (R&D) productivity, pharmaceutical companies have opened their R&D organizations to external innovation. Here, we identify and characterize four new types of open innovator, which we call 'knowledge creator', 'knowledge integrator', 'knowledge translator' and 'knowledge leverager', and which describe current open R&D models. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. The role of innovation in the trade industry

    Directory of Open Access Journals (Sweden)

    Gheorghe EPURAN

    2015-12-01

    Full Text Available This paper researches the attitudes of managers of small and medium companies from Brasov concerning the importance of the innovation process for their business. The objective of this paper is to determine the present level of innovation in trade industry and the future innovation strategies. The conclusions of this research are based on the results of a marketing research among managers from Brasov city. From our point of view the future of the trade industry will be configured by the mix of information and communication technologies with the social, economic and legislative issues, context in which trade companies will become more competitive and will generate more value for the consumer.

  19. Measuring innovation in a 'low-tech' service industry: the case of the Dutch hospitality industry

    NARCIS (Netherlands)

    den Hertog, P.; Gallouj, F.; Segers, J.

    2011-01-01

    This article presents the findings of a survey among 613 firms in the Dutch hospitality industry adopting a demarcation perspective. The paper illustrates that innovation in this service industry is much higher and more varied than regularly reported. It further indicates that innovation activities

  20. Industrial PhD report: Sustainable Innovation

    DEFF Research Database (Denmark)

    Olesen, Gitte Gylling Hammershøj

    2011-01-01

    Erhvervs PhD rapport udarbejdet i tilknytning til Erhvervs PhD kurset der er obligatorisk for Erhvervs PhD studerende. Rapporten omhandler relationer melllem den akademiske verden og industrien i sammenhæng med PhD projektet, betragtet og analyseret gennem teori om bæredygtig innovation....

  1. The Impact of Clustering on the Innovativeness Of Furniture Industry

    Directory of Open Access Journals (Sweden)

    Grzegorzewska Emilia

    2014-06-01

    Full Text Available The furniture industry in Poland is a rapidly growing area of the economy. The level of innovation strongly influences furniture enterprises competitive position on the market. To support innovation, small and medium furniture industry businesses are affiliate in cluster initiatives. It supports the area of R&D, joint promotional campaigns and financing of new ventures. The paper presents selected furniture industry cluster initiatives that implement policies to support innovation activities of enterprises affiliated to them. In Poland, more and more furniture industry businesses brings together in cluster initiatives that aim to improve their market competitiveness and increase the level of innovation. Taken studies allow to analyse the direction of innovative activities undertaken by companies of the furniture industry with particular emphasis on the ones associated in clusters. Thus the aim of the article is to investigate the interest of Polish furniture enterprises (especially SMEs, in participation in clusters. Moreover the benefits of that choice and its impact on Polish furniture manufacturers innovativeness are evaluated.

  2. Opening Up Natural Resource Based Industries for Innovation (LAC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Opening Up Natural Resource Based Industries for Innovation (LAC). Commodities based on natural resources account for at least half of the exports of two-thirds of the countries in Latin America and the Caribbean (LAC). There is growing concern, however, that existing natural resource-based industries are ...

  3. Optical Measurement Techniques Innovations for Industry and the Life Sciences

    CERN Document Server

    Peiponen, Kai-Erik; Priezzhev, Alexander V

    2009-01-01

    Devoted to novel optical measurement techniques that are applied both in industry and life sciences, this book contributes a fresh perspective on the development of modern optical sensors. These sensors are often essential in detecting and controlling parameters that are important for both industrial and biomedical applications. The book provides easy access for beginners wishing to gain familiarity with the innovations of modern optics.

  4. Innovating the Dutch construction industry: How to change?

    NARCIS (Netherlands)

    Prof. J.W.F. Wamelink; Dr. Ir. Frens Pries

    2009-01-01

    The environment of the(Dutch) building industry is increasingly turbulent. There are many cges for the building industry. Innovative tendering, better marketing, openness and transparency are examples of this. A strong reduction in failure costs (estimated at between 10 and 25% of the total costs)

  5. Driving Innovative Thinking in the New Zealand Construction Industry

    Directory of Open Access Journals (Sweden)

    Mohammadali Noktehdan

    2015-04-01

    Full Text Available This paper examines the relationship between innovation and productivity improvement in the construction industry. It is argued that this relationship is not well understood due to lack of in-depth understanding of innovation in construction. To overcome this obstacle, the authors present a multi-dimensional innovation classification system which aims at better defining and classifying what is meant by innovation in construction. The use of this classification system is demonstrated by applying it to a database of 500 innovations reported by the construction alliance, the Stronger Christchurch Infrastructure Rebuild Team. The results clearly demonstrate the diversity of types, degree of novelty and performance improvement benefits among construction innovations. Such diversity means that the impact of the reported innovations on productivity and performance are of different levels of significance. The classification system developed in this study can be used by construction organisations and alliances in the future to develop more detailed methods of calculating innovation performance indicators, based on the innovation type, novelty and benefits factors. By using this system, they can also put in place mechanisms to influence the types of innovation developed in their projects with the aim of maximising their productivity performance.

  6. Industrial policy: Where does innovation fit in?

    CSIR Research Space (South Africa)

    Levin, Saul

    2017-10-01

    Full Text Available to achieve economic growth. History has shown us that the most successful nations in terms of economic growth and development were those that supported and contributed to growing the industrial base of their economy. Even today those developed economies... point but that does not ensure rapid economic growth or economic development. History is also littered with those countries that became off-shore destinations for very cheap assembly only to find they lose their industrial base when conditions change...

  7. Trends in innovation activities in manufacturing industries across development echelons

    Directory of Open Access Journals (Sweden)

    Abdullah M. Khan

    2017-07-01

    Full Text Available This empirical paper explores trends in innovation activities measured by a countries’ total patent application submission intensity relative to its population, and by analyzing U.S. granted patents data for cohorts of developed countries and developing countries. In addition to tabular and graphical analyses, I use a baseline regression model and a variant model thereof to assess the relative influence of a set of aggregate variables on innovation activities in eight manufacturing industries across two cohorts of countries (developed and developing where each cohort contains eight individual countries. Eight industries included in this study are: Chemical, Petroleum, electrical and electronics equipment, machinery, pharmaceutical, plastic, computer, and textile. The cohort of developed countries includes Australia, Canada, Czech Republic, France, Italy, Poland, Switzerland, and the United States. The cohort of developing countries includes Brazil, China, India, Malaysia, Mexico, Russia, South Africa, and Turkey. Per regression results, ethnic diversity is a statistically significant positive determinant of innovation for all industry aggregate patent count for both high income and developing countries. Also, per capita electricity usage, R&D expenditure as percent of GDP, and percent of population with internet access are three positive factors of innovation irrespective of industrial subsectors and position of a country in the development echelon. Interestingly, impact of ICT-services export is statistically significant and innovation boosting in developing countries in the cohort relative to countries in the cohort of developed countries. It also appears that trade openness served as a stronger stimulant of innovation activities for developing countries’ but not as much for the cohort of developed or high-income countries. This paper attempts to extend the literature on cross-country comparison of innovation activities by using two

  8. Change and innovation: the evolving industry

    International Nuclear Information System (INIS)

    Lay, K.L.

    1999-01-01

    The rapidly increasing demand for energy is creating significant opportunities for energy companies world wide but only those companies equipped to take early advantage of the new markets will profit. Some of the recent technological advances such as telephones, washing machines, air conditioning and the Internet are mentioned. Success will be largely judged by a company's ability to maximise technology and make life easier and more productive. The paper discusses competition in global markets, environmental concerns, how consumers are benefiting, and cleaner energy. It is suggested that with the right vision and innovation, man can achieve a cleaner and more cost-effective world. (uk)

  9. Innovation indicators: a survey of innovative activities in the international food processed industry

    Directory of Open Access Journals (Sweden)

    Vinicius Cardoso de Barros Fornari

    2015-02-01

    Full Text Available This paper seeks to combine traditional methods of measuring intensity with other alternative indicators to examine the dispersion of innovation activities in different industries and countries. The hypothesis that underlies the study lies in the fact that in the Food Processed Industry (IAP the traditional methods are insufficient to detect the core of the innovation process. As method, we analyzed patent data extracted from the twenty-five largest food processed companies in the world and suggested different indicators developed from the Pesquisa de Inovação Tecnológica (PINTEC, 2010 – for Brazilian companies – and the Community Innovation Survey (CIS, 2009 – for European Union companies. The results allowed us to establish relationships in three dimensions: (i the complexity of the innovative effort of the IAP; (ii the efforts to innovation in different countries are distinct and; (iii there is heterogeneity in country performance.

  10. Change and Innovation in the Funeral Industry.

    Science.gov (United States)

    Beard, Virginia R; Burger, William C

    2017-05-01

    The "modern" or traditional funeral, as it is known in the funeral industry today, that includes embalming, casket, service, and burial in a cemetery, emerged as a result of four forces in American society: the Industrial Revolution, the Civil War, the emergence of a genteel code of conduct as a result of increased wealth in our society, and changing cultural views toward death. While the traditional funeral ritual remains the most popular funeral selection in the United States today, the industry is experiencing changes that are reshaping the death rituals and methods of body disposal. A meta-analysis of relevant news articles from 1987 through 2014 finds that these changes are occurring as a result of two general motivational themes: a Business-Related Motivation and a Consumer-Related Motivation, each with corresponding subthemes.

  11. Innovation and technical efficiency in Malaysian family manufacturing industries

    OpenAIRE

    Susila Munisamy; Edward Wong Sek Khin; Chia Zi Fon

    2015-01-01

    This study investigates the technical efficiency for each industry in the Malaysian manufacturing sector is estimated by using Data Envelopment Analysis (DEA). In order to pursue a balance of innovation between long-term and short-term performance strategy, we integrate the Balance Scorecard (BSC) approach with DEA. Furthermore, this paper looks at the determinants of efficiency using the Tobit regression model. In measuring the level of firms’ efficiency and innovation, the wood and wood b...

  12. Impact of Disruptive Innovations on Mobile Telecom Industry in Lebanon

    Directory of Open Access Journals (Sweden)

    Wael Bakhit

    2016-04-01

    Full Text Available The telecommunication industry is different from other industries in the basis of innovation rate. This industry continuously provides end users with new technological generations and disruptive technologies. Due to the complexity of the nature of the product served, telecommunication industry is an important case to study in order to explain the real reasons for the challenges facing telecom companies. Researching in this area will explain why some companies survive while others fail. The wide range served technology innovations is most likely to result in rapid mutation of consumers’ spending habits thus directly influencing the mobile phone companies. The aim of this is to test the reliability of innovations and its impact on companies’ profitability. For that purpose, a survey with 200 end users and 20 employees from two telecom providers (“Alfa, and “Touch” was conducted to investigate various disruptive and conventional means and their impact on the financial performance of telecom industry. The results show that most of the revenue of telecom industry comes from usage of data while the industry is lacking for competition, and quality services while charging high tariffs for customers. Currently customers are migrating to data, therefore performing a pressure on the industry to improve its services. To conclude, network operators need to decide what to they want to sacrifice and how far they want to go to reach targeted results.

  13. Continuous business model innovation in the Danish newspaper industry

    DEFF Research Database (Denmark)

    Holm, Anna B.; Günzel, Franziska

    Business model innovation is undoubtedly of strategic importance in innovation management. However, little is known on how in fact how companies experiment and innovate with regards to their business models. To shed more light on this issue, we have conducted a qualitative study of the newspaper...... industry in Denmark. Business model innovation became imperative for the traditional newspaper publishers after many years of the declining readership and revenues. We collected rich primary and secondary data from various sources during 2010-2012. Our analysis suggests that changing business models in its...... various parts does not guarantee a successful business model change and may even harm the existing well-functioning business model. To innovate a business model successfully, managers need to secure the business logic flow and its feedback loops....

  14. How innovative New Zealand firms procure environmental innovations for the construction industry : a literature review

    NARCIS (Netherlands)

    Staal, Anne; Tookey, John; Seadon, Jeff; Walhof, Gert; Mobach, Mark P.

    2015-01-01

    Construction industries in New Zealand and abroad have a low track record for successful sustainable innovations. This often has a negative impact on private and government spending, and on quality, society and the environment. This paper posits that the construction industry needs step-change (i.e.

  15. Significance of promoting innovative efforts and technology transfer for industry

    Energy Technology Data Exchange (ETDEWEB)

    Rembser, J [Bundesministerium fuer Forschung und Technologie, Bonn-Bad Godesberg (Germany, F.R.)

    1978-11-01

    Technological know how and innovations will be of considerable future importance for West German industry. Changes in the reliability of sources of supply (energy, raw materials), the burden imposed on the environment by intensive industrial production and numerous private sources, and the stiffening of international competition necessitate cLoser collaboration between industry and government. Public aid in research and development efforts will assume an important role. In West Germany there is a wide variety of such governmental aids. The range extends from direct grants to enterprises for research and development work to the furnishing of advice to promote innovative efforts and technology transfer. Banks provide risk capital with governmental aid to firms trying to indroduce high-risk innovations into the market. In recent years the aim has been to provide small and medium-size firms with better access to technological know how and governmental aids.

  16. Crowdsourcing for Innovation in the Danish Building Industry

    DEFF Research Database (Denmark)

    Kamstrup, Andreas; Holm Jacobsen, Peter

    The aim of this paper is to inquire into a digital platform designed and operated to create innovations within the Danish building industry. In the innovation literature this kind of new ICT is known as a crowdsourcing intermediary (Zogaj, Bretschneider, & Leimeister, 2014). The study is ongoing...... the platform dynamics as a novel form of competition and examine how the “open call” for innovative solutions unfolds in practice: We borrow terminology from the architectural competition (Kreiner, 2012), from economic sociology (Stark, 2011) and valuation theory (Karpik, 2010), and show 1) how assessment...

  17. Innovation in the personal care industry.

    Science.gov (United States)

    Knaggs, Helen

    2010-09-01

    When considering opportunities to develop novel, eye-catching and consumer-relevant personal care (PC) products, it is important to understand and reflect on how science has changed over the last two decades and how this has generated a new body of data from which to draw ideas and technologies. This article outlines some advances in scientific technologies and new ways of thinking in science, which lead to new insights into skin biology. How these innovations may impact and be leveraged into the development of new products in PC is also discussed. For example, fundamental discoveries in skin biology and the advancement of scientific methodologies are enabling step changes in technology in PC. Two examples of areas where we have seen much advancement are discussed. This article is based on and summarizes a presentation given at the HBA in Sep 2009 as part of a session entitled "Emerging Technologies and New Opportunities in Antiaging in PC." © 2010 Wiley Periodicals, Inc.

  18. Innovative User Interfaces in the Industrial Domain

    OpenAIRE

    Jutterström, Jenny

    2010-01-01

    The goal of this thesis is to explore how the HMI of a process control system can be improved by applying modern interaction technologies. Many new interaction possibilities are arising on the market, while the interaction in the industrial domain still is quite conservative, with computer mouse and keyboard as the central method of interaction. It is believed that by making use of technology available today, the user interface can provide further assistance to the process control operators a...

  19. Innovative development and factors affecting the innovative activity of industrial enterprises in Bulgaria

    Directory of Open Access Journals (Sweden)

    Sotirova Asya Olegova

    2016-12-01

    Full Text Available Innovations are a necessity, innovations are a factor, innovations are the moving force of the companies in the 21st century. Every modern manager should recognize the role of innovations for the existence of the enterprises and to aim at innovative development. The novelties in various areas are to be followed up. It is necessary to look for the options and to overcome the obstacles standing in the way of innovations. The major objective of this article is to establish the state of innovative activity of industrial enterprises in Bulgaria and to identify the factors exercising the largest influence on their innovative development. The major results to be achieved are the establishment of the basic internal and external factors that support innovations, the deduction of the major problems occurring during the innovation process and the establishment of some directives to activation. The major methods of study used in this work are statistical methods for evaluation, method of analysis and synthesis, method of comparison. Information of literature sources has been studied and systematized within the process of research, as well as analytical reports of Bulgaria and the European Union, and results from an inquiry held are used, as well as statistical data of the National Statistical Institute of the Republic of Bulgaria.

  20. Innovation Systems Research in the Italian Food Industry

    OpenAIRE

    Ornella Wanda Maietta

    2014-01-01

    The objective of the paper is to determine the role that R&D networking, through the collaboration of firms with universities, plays among the determinants of product and process innovation in the Italian food and drink industry and how geographical proximity to a university affects both R&D university-industry collaboration and innovation. The data are sourced from the 7th (1995-1997), 8th (1998-2000), 9th (2001-2003) and 10th (2004-2006) waves of Capitalia survey data. The approach is a tri...

  1. Modeling Innovations Advance Wind Energy Industry

    Science.gov (United States)

    2009-01-01

    In 1981, Glenn Research Center scientist Dr. Larry Viterna developed a model that predicted certain elements of wind turbine performance with far greater accuracy than previous methods. The model was met with derision from others in the wind energy industry, but years later, Viterna discovered it had become the most widely used method of its kind, enabling significant wind energy technologies-like the fixed pitch turbines produced by manufacturers like Aerostar Inc. of Westport, Massachusetts-that are providing sustainable, climate friendly energy sources today.

  2. Innovations in the brewing industry: light beer.

    Science.gov (United States)

    Blanco, Carlos A; Caballero, Isabel; Barrios, Rosa; Rojas, Antonio

    2014-09-01

    The demand for light beers has led brewers to innovate by developing light beer. However, these products are not widely accepted in Europe compared to North America and Australasia because of their lack of fullness in the taste and low bitterness compared with conventional beer. The lower levels of some important compounds, present in light beer, can explain these features since they are responsible for the characteristics of the beer. These include alcohol soluble proteins, oligosaccharides, glycerol, polyphenols, iso-α-acids, fusel alcohols and trihydroxy fatty acids. Light beer is produced by several methods, the most commonly used is the addition of glucoamylase to the wort before or during fermentation. This enzyme metabolizes residual carbohydrates (mainly dextrins) transforming them into fermentable sugars and reducing the caloric and alcohol content in this type of beer. Recently pilot studies have been carried out with genetically engineered yeast strains in which amylolytic genes are introduced into the yeast genome in order to metabolize carbohydrate residues. When introducing amylolytic genes, a better fermentability occurs although the fullness of flavor still becomes reduced.

  3. Healthcare systems, the State, and innovation in the pharmaceutical industry

    Directory of Open Access Journals (Sweden)

    Ignacio José Godinho Delgado

    Full Text Available Abstract: This article discusses the relations between healthcare systems and the pharmaceutical industry, focusing on state support for pharmaceutical innovation. The study highlights the experiences of the United States, United Kingdom, and Germany, developed countries and paradigms of modern health systems (liberal, universal, and corporatist, in addition to Japan, a case of successful catching up. The study also emphasizes the experiences of China, India, and Brazil, large developing countries that have tried different catching up strategies, with diverse histories and profiles in their healthcare systems and pharmaceutical industries. Finally, with a focus on state forms of support for health research, the article addresses the mechanisms for linkage between health systems and the pharmaceutical industry, evaluating the possibilities of Brazil strengthening a virtuous interaction, favoring the expansion and consolidation of the Brazilian health system - universal but segmented ‒ and the affirmation of the innovative national pharmaceutical industry.

  4. The Fourth Industrial Revolution (Industry 4.0: A Social Innovation Perspective

    Directory of Open Access Journals (Sweden)

    Rabeh Morrar

    2017-11-01

    Full Text Available The rapid pace of technological developments played a key role in the previous industrial revolutions. However, the fourth industrial revolution (Industry 4.0 and its embedded technology diffusion progress is expected to grow exponentially in terms of technical change and socioeconomic impact. Therefore, coping with such transformation require a holistic approach that encompasses innovative and sustainable system solutions and not just technological ones. In this article, we propose a framework that can facilitate the interaction between technological and social innovation to continuously come up with proactive, and hence timely, sustainable strategies. These strategies can leverage economic rewards, enrich society at large, and protect the environment. The new forthcoming opportunities that will be generated through the next industrial wave are gigantic at all levels. However, the readiness for such revolutionary conversion require coupling the forces of technological innovation and social innovation under the sustainability umbrella.

  5. Specific examples on fostering open innovation at the industry level

    DEFF Research Database (Denmark)

    Mahdad, Maral; Albats, Ekaterina

    2017-01-01

    This chapter highlights the role of university-industry collaboration in generating innovation. It provides an overview of the actors’ motives for collaboration, the most common barriers and drivers of this type of inter-organizational relationships, and reviews the types of collaborative links....... Moreover, this chapter introduces various online tools for bridging the academia and the industry and presents some real cases of university-business collaboration. The chapter is supplemented by pedagogical guidelines, evaluation questions, teaching tips and suggestions for reading....

  6. DEVELOPMENT OF INNOVATIVE PROCESSES IN THE COMPANIES OF SPACE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Katrina B. Dobrova

    2016-01-01

    Full Text Available In this article, the proposals to improve the theoretical and methodological base for the development of innovative technologies aerospace industry are made based on an analysis of its current state and the study of the factors influencing this process at every stage, as well as the goals and objectives of the modernization of the Russian economy. The relevance of the study due to the fact that the rocket and space industry is regarded as an important component of sustainable socio-economic development and a guarantee of national security. Having our own space rocket means significantly promotes sound public policy in accordance with the doctrines, strategies, concepts and programs in the political, economic, social, military, environmental, scientific, technological, information and other fields. It was noted that the study of features of the commercialization of innovative technologies of the Russian Federation, the space industry is crucial to determine the factors and conditions for successful implementation of the development industry, the search of promising directions of development of the space industry and the economy as a whole. Emphasis is placed on the formation of the basic elements of innovation infrastructure and the creation of effective mechanisms of commercialization, creation of actual operating business on their basis, investment in the development of the aerospace industry, including using the tools of public-private partnerships and venture financing.

  7. Industry 4.0 and representative participation in innovation in manufacturing industries

    OpenAIRE

    Ramioul, Monique

    2017-01-01

    Industry 4.0 and representative participation in innovation in manufacturing industries Prof. dr. Monique Ramioul HIVA-KU Leuven, Belgium Abstract submitted for the ETUI-workshop “Digitalization of manufacturing and restructuring of value chains: technology adoption, upgrading, and the changing geography of production in Europe.” (23-24 February 2017, Naples Italy). Under the umbrella concept Industry4.0, the advanced digitalisation and robotisation of industry is presented as a pro...

  8. Innovation in the forest products industry: an analysis of companies in Alaska and Oregon.

    Science.gov (United States)

    Abra Hovgaard; Eric Hansen; Joseph. Roos

    2005-01-01

    Because there is a lack of innovation research in the forest products industry and innovative activities in the industry are not well documented, this study attempted to fill that void. The objectives of this study were to understand the process and definition of innovation in the forest products industry, identify the constraints on innovative activities, identify...

  9. Spin-off and Innovation in the Pharmaceutical Industry

    Directory of Open Access Journals (Sweden)

    Enzo Peruffo

    2014-11-01

    Full Text Available Parent companies usually undertake corporate spin-offs to cope with higher competitive environments or when, in high technology industries, the differences between R&D investments and intangible assets are larger. Consistent with the recent “positive view”, spinoffs can be considered as a “proactive strategic choice” to foster innovation, develop new activities, being different from past strategic initiatives and, more generally, not being strictly connected to the corporate strategy of the firm. In order to investigate the relation between divestiture decisions and innovation, we conduct an explorative case study in the pharmaceutical industry to show how spin-offs can help firms to explore new opportunities for innovation, search for new funding and push to create the basis for future development.

  10. Adoption of innovative production technologies in the road construction industry

    NARCIS (Netherlands)

    Habets, M.J.M.; van der Sijde, Peter; Voordijk, Johannes T.

    2007-01-01

    New procurement methods encourage the adoption of innovative production technologies. This triggers the need for entrepreneurship in the construction industry. The purpose of this study is to provide insights into the adoption processes of a particular set of new production technologies in the Dutch

  11. Innovative quality management practices in the Dutch construction industry

    NARCIS (Netherlands)

    Bossink, B.A.G.

    2002-01-01

    Quality management practices do support the management of strategically important innoυation processes. This conclusion is based on empirical research in the Dutch construction industry. A large-scale innovative construction project is intensively studied during a three-year period. The quality

  12. Developing National Systems of Innovation: University–Industry ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    3 Features of interactions between public research organizations and industry in Latin ..... The questionnaire for innovative firms was based on the original ..... Technological revolutions at the centre determine another structural feature of the ..... embodied in technology – through the acquisition of machinery, equipment, and ...

  13. UNIVERSITY-INDUSTRY PARTNERSHIPS FOR INNOVATION: SRI LANKAN EXPERIENCES

    Directory of Open Access Journals (Sweden)

    Rukmal Nishantha WEERASINGHE

    2018-03-01

    Full Text Available The University sector in the national innovation system (NIS is considered as one of the key players which links new knowledge with the industry for the purpose of diffusing new knowledge for economic and social benefits through commercialization of products, services, processes and other artifacts. This paper inquires the role of Sri Lankan universities in the innovation process by paying special attention on the strength of university-industry linkages. Responses from the industrial sector obtained through a surveys and interviews with respondents. Data presented and analyzed through descriptive statistics using summery statistics and figures.  Social Network Analysis (SNA was employed to determine the strength of the networking relationship among the Universities and the Firms Qualitative data were analyzed employing the method of content analysis. The study revealed a positive trend in the higher education sector towards performing effective role in the future towards innovation. However, it was evident that these relationships are still remained very weak. The industrial sector remains inward oriented with little intention to innovation while universities still prioritize their traditional teaching role in higher education.

  14. The Globalization of Innovation in the Danish Food Industry

    DEFF Research Database (Denmark)

    Haakonsson, Stine Jessen

    2012-01-01

    The internationalization of innovation in the food industry is becoming increasingly oriented towards emerging markets. Innovative lead firms express a need for ‘tapping into knowledge’ by collaborating with research facilities, customers and suppliers in these new locations. European firms...... experience a push towards market expansion and knowledge generation directed at emerging markets. This results in new network constructs: global innovation networks. The aim of this paper is twofold. First, it identifies and outlines the determining factors behind the internationalization of innovation due...... to the need to access new markets and knowledge. This unfolds through strategies of exploitation and exploration. Second, it investigates the extent to which these strategies connect to position in the value chain and factors in the host economy. In this, the potential impact at the receiving end...

  15. Learning, Upgrading, Innovation in the South African Automotive Industry

    DEFF Research Database (Denmark)

    Barnes, Justin; Lorentzen, Jochen

    2003-01-01

    contradicts at least part of the conventional wisdom concerning the location of innovation activities in global car value chains. Results also point to a deficient NIS insofar as there appears to be a disjuncture between the demand for engineering competence in the manufacturing sector on the one hand......This paper addresses the innovation activities of automotive component manufacturers in South Africa. It looks at the technological trajectory of a handful of firms that stand out from the crowd and analyses the results of their endeavours in the context of their interaction with foreign capital......, their internal upgrading and R&D agenda, and their interface with South Africa's national innovation system (NIS). The analysis makes use of eight case studies, and illustrates the conditions under which indigenous innovation in the automotive industries can happen in a developing country. This finding...

  16. Knowledge management and organizational innovativeness in Iranian banking industry

    Directory of Open Access Journals (Sweden)

    Maryam Bidmeshgipour

    2012-12-01

    Full Text Available Knowledge management has changed its nature from theoretical concept to an instrument that assists innovativeness. The originality of this study lies in its purpose to explore issues of knowledge management and its relation to the innovativeness of organizations. The study focuses on three selected Iranian banks (in public and private sector, an industry and a setting that has received less attention by researches so far. This paper studies the effectiveness of managers’ mindset in leading or misleading the organizations to achieve organizational innovativeness through KM. Based on a questionnaire survey, the authors argue that applying knowledge management makes it simpler to achieve the innovativeness in organizations. What we found significant in this study is that employees, provided with appropriate training and mentoring opportunities to generate novel ideas, would create new services in banking. The mindset of bank managers about their human resources absorbs diversity of opinions and provides equal opportunity for all employees to present ideas.

  17. Innovations in the restaurant industry: An exploratory study

    Directory of Open Access Journals (Sweden)

    Ivkov Milan

    2016-01-01

    Full Text Available This paper tends to identify managers' current innovation activities and attitudes, and also perceptions of what might become future trends and the prospective course in the restaurant industry. Additionally, this paper analyses linkage between sociodemographic profile of managers and a type of innovation they prefer/apply. Full service casual dining restaurant managers from three different countries were interviewed in order to examine their attitudes towards innovations, and to reveal their perceptions of future trends. ANOVA was used to reveal differences between managers' attitudes towards the area of innovation. The results of qualitative study highlight five areas of innovation that could help managers create value based service and increase competitiveness. It is found that age, education level and experience of the restaurant managers affect the innovation type they apply. Additionally, this paper is the first to examine the linkage between socio-demographic profile of restaurant managers and a type of innovation they apply. It offers useful guidelines for hospitality managers.

  18. Industry water use : innovations, changes and challenges

    International Nuclear Information System (INIS)

    Braun, B.

    2004-01-01

    This paper presents work conducted by Canadian Natural Resources Ltd. (CNRL) in developing the McMurray Formation as an alternate water source in the Cold Lake Beaver River (CLBR) basin. Industry relies on both fresh water and brackish water to produce oil from thermal oil sands projects. A long-term sustainable supply of water is critical to the development of such projects. Although historically water has been considered as a renewable resource, it is currently viewed in a wider context. Technical advancements have made it possible to use recycled water for thermal recovery. Many heavy thermal oil expansions use brackish water. Capital costs are higher but heating costs are lower because brackish water is already warm. The use of brackish water allows companies to survive within their licenses while increasing production. Other possibilities include the use of depleted reservoir sections to store water to increase the use of recycled water. It was noted that brackish water resources need to be mapped and understood in greater detail. The objective is to use brackish water at a cost equal to, or less than fresh water. tabs., figs

  19. How to revive breakthrough innovation in the pharmaceutical industry.

    Science.gov (United States)

    Munos, Bernard H; Chin, William W

    2011-06-29

    Over the past 20 years, pharmaceutical companies have implemented conservative management practices to improve the predictability of therapeutics discovery and success rates of drug candidates. This approach has often yielded compounds that are only marginally better than existing therapies, yet require larger, longer, and more complex trials. To fund them, companies have shifted resources away from drug discovery to late clinical development; this has hurt innovation and amplified the crisis brought by the expiration of patents on many best-selling drugs. Here, we argue that more breakthrough therapeutics will reach patients only if the industry ceases to pursue "safe" incremental innovation, re-engages in high-risk discovery research, and adopts collaborative innovation models that allow sharing of knowledge and costs among collaborators.

  20. Emissions trading and innovation in the German electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    Cames, Martin

    2010-07-01

    One major objective of the introduction of emissions trading in the European Union was to promote innovation towards mitigating climate change. Focusing on the German electricity industry, the extent to which this objective has been achieved up to now and how the design of the trading scheme could be improved towards achieving the intended objective shall be analyzed in this thesis. These questions are tackled in the thesis from a theoretical and an empirical perspective. The theoretical analysis was largely based on neoclassical environmental economics by using an algebraic model which allowed for comparison of the relevant companies' profits under various configurations of the analyzed design options. The empirical analysis was grounded on two surveys of the electricity industry - one before the start of emissions trading, the other after two and a half years of experience - which enabled identification of the concrete changes in the companies' perceptions and attitudes towards innovation due to the introduction of emissions trading. The analysis reveals some indications that the instrument has basically functioned as originally intended although it has certainly not yet developed its full potential in terms of promoting innovation towards a more climate friendly electricity system. From an environmental innovation perspective the following improvements are essential: (1) Closure provisions should be abolished as soon as possible because they basically extend the lifetime of old installations and thus rather delay innovation. (2) Fuel-specific allocation to new entrants should also be abandoned since it eliminates - at least partly - the incentives to shift investments towards technologies which use more carbon friendly fuels such as natural gas or biomass. (3) Introducing full auctioning for the electricity industry would remedy both of the above-mentioned weaknesses and at the same time eliminate the windfall profit generated by free allocation of allowances

  1. Emissions trading and innovation in the German electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    Cames, Martin

    2010-07-01

    One major objective of the introduction of emissions trading in the European Union was to promote innovation towards mitigating climate change. Focusing on the German electricity industry, the extent to which this objective has been achieved up to now and how the design of the trading scheme could be improved towards achieving the intended objective shall be analyzed in this thesis. These questions are tackled in the thesis from a theoretical and an empirical perspective. The theoretical analysis was largely based on neoclassical environmental economics by using an algebraic model which allowed for comparison of the relevant companies' profits under various configurations of the analyzed design options. The empirical analysis was grounded on two surveys of the electricity industry - one before the start of emissions trading, the other after two and a half years of experience - which enabled identification of the concrete changes in the companies' perceptions and attitudes towards innovation due to the introduction of emissions trading. The analysis reveals some indications that the instrument has basically functioned as originally intended although it has certainly not yet developed its full potential in terms of promoting innovation towards a more climate friendly electricity system. From an environmental innovation perspective the following improvements are essential: (1) Closure provisions should be abolished as soon as possible because they basically extend the lifetime of old installations and thus rather delay innovation. (2) Fuel-specific allocation to new entrants should also be abandoned since it eliminates - at least partly - the incentives to shift investments towards technologies which use more carbon friendly fuels such as natural gas or biomass. (3) Introducing full auctioning for the electricity industry would remedy both of the above-mentioned weaknesses and at the same time eliminate the windfall profit generated by free allocation of

  2. Regional Institutional Structure in the Context of Innovative Industry Development

    Directory of Open Access Journals (Sweden)

    Anastasia Y. Nikitaeva

    2017-03-01

    Full Text Available The paper proves that successful innovation-oriented development of the industrial complex of the region can be ensured through the creation of adequate institutional structure. As a theoretical and conceptual platform for this task the use of regional institutionalism is suggested. It is reasoned that integration component plays an important role in providing of the innovative development of the industry in modern economic realities and the potential effects of integration on meso- and micro-levels of economy are provided. Integration of industrial structures potential at the same time assumes expansion of a partner segment of the entities relations in the market environment on the basis of network, cluster, and integration approaches convergence to management in the industrial development. On the basis of the international experience analysis it is illustrated that forming of multichannel partnership of actors in the industrial sphere with a vector on an innovatization requires creation of the corresponding institutional conditions. It is established that the main objectives of the relevant institutes consist in legitimization of various forms and technologies of partnership and stimulation of economic entities interactions. The first problem is solved by means of legal support of integration and partners’ interactions, the second one - with the use of a program and project approach. The basic structural elements and functional areas of regional institutional structure in the context of innovative industry development are determined. It is shown that the institutions of the partnership and monitoring of the obligations implementation by integration formations participants can have formal and informal nature, at the same time the trust institution is especially important. In work significant influence of regional specifics on institutional structure and integration of economic entities is proved.

  3. Industrial design as an innovative element in engineering education

    DEFF Research Database (Denmark)

    Schjær-Jacobsen, Hans; Abou-Hayt, Imad; Ashworth, David

    2012-01-01

    This paper describes how the Copenhagen University College of Engineering (IHK), in our continuing effort to innovate the engineering study programs, have introduced strong industrial design elements in the 210 ECTS Bachelor of Mechanical Engineering program as well as the 30 ECTS International...... Design Semester and the 10 ECTS Summer School in International Design and Development. The paper describes how implementation of novel industrial design subject areas requires the creation of new laboratory and workshop facilities in order to combine traditional engineering design disciplines...... with creative design as a driver of innovation. With a practical and problem based learning approach at IHK the students are asked to work closely together with companies to come up with engineering solutions that are sustainable from both an engineering and a design perspective....

  4. Service Innovation by Industrial Cluster Formation and Export Promotion

    Directory of Open Access Journals (Sweden)

    Noleen Pisa

    2017-12-01

    Full Text Available Service innovation drives economic growth and structural change by stimulating the development of new sectors and productivity improvements in existing sectors. Resource based sectors are the main contributors to South Africa’s North West province’s economic output This paper illustrates how such a region can use industrial cluster formation and focused export promotion as a strategy to enhance service innovation. Four service clusters were identified within the above mentioned province through structural path analysis and power of pull methods. An export market selection model is applied to the identified service industrial clusters to reveal realistic export opportunities associated with each cluster. Finally, trade multipliers are used to show the spill-over benefits given an increase in the clusters’ exports. Policymakers can use these results to inform actions that may assist in the development of these services clusters to strengthen the province’s competitive advantage and diversify its output.

  5. Innovation in product and services in the shipping retrofit industry

    DEFF Research Database (Denmark)

    Hermann, Roberto Rivas; Köhler, Jonathan; Scheepens, Arno

    2015-01-01

    Eco-innovation research pays increasing attention to business models and their contribution to the diffusion of environmental technology into socio-technological systems. The extent to which a business model hampers or promotes certain types of eco-innovations remains an open question. In order...... to shed light on this issue, the authors develop a conceptual framework to show how a specific type of business model (Product-Service Systems) could be applied to the context of the maritime industry. With a focus on the Danish maritime industry, the case study addresses two questions: Which business...... models are being used to develop, install and service the ballast water treatment technology? And, How can these business models add value to the ballast water treatment systems in the market? The case shows that different business models are applied depending on whether the installation is on new...

  6. Restructuring the US telecommunications industry - Impact on innovation

    Science.gov (United States)

    Agnew, C. E.; Romeo, A. A.

    1981-01-01

    The Communications Act of 1934, which regulates the United States telecommunications industry, is becoming less able to deal with the changes brought by modern technology. Therefore, proposals are being made to restructure the industry. Breaking up AT&T into smaller firms would have only minor effects, since its ratio of R and D to sales has been near the median for large telephone companies. Restructuring AT&T into subsidiaries dealing at arms' length might cause a reordering of priorities toward more directly marketable and useful products, but too extensive a break-up could endanger Bell Labs' commitment to basic research. Regulation leads a firm to ignore true social value of possible products, expand into low profit markets, and favor capital-intensive over labor-intensive innovation. If regulatory lag occurs, a firm will produce cost-reducing innovation in order to increase its profit.

  7. Breathing shoes and complementarities: strategic innovation in a mature industry

    OpenAIRE

    A. Camuffo; A. Furlan; P. Romano; A. Vinelli

    2008-01-01

    This paper tells the story of Geox, an Italian footwear manufacturer that, in less than a decade, has become one of the world's largest shoe manufacturers. Applying the related notions of complementarity and performance landscape to study strategic positioning in the footwear industry, we show that, though grounded on product innovation (the original Geox breathes® patented system which allows ventilation in waterproof rubber sole), Geox's competitive advantage has not grown out of operationa...

  8. Blockchain - an Innovation Technology of the Post-Industrial Economy

    OpenAIRE

    Arkhireiska Natalia V.

    2017-01-01

    The article is aimed at studying the innovation technology of the post-industrial economy - blockchain. It has been found that blockchain is a multifunctional and multi-level information technology designed to reliably account for different assets. It has been proved that the most important today is blockchain for Bitcoin. The article explores the opportunities, prospects and risks associated with investment in cryptocurrency. It has been determined that the main advantages of investment in B...

  9. Innovations for production optimization in the petroleum industry: conference reports

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    This Insight conference was held to review the methods by which the petroleum industry could optimize production. Presentations from nine guest speakers were included. The issues addressed included the use of computer software for integrated data systems such as SCADA and GIS, the use of remote sensing and real-time systems to monitor well production and reserves capability more effectively, and innovations to minimize finding and development costs and their effect on financial markets. figs

  10. THE EFFECTIVENESS OF INNOVATION PROJECTS IN POLISH INDUSTRY

    Directory of Open Access Journals (Sweden)

    Jan Zwolak

    2016-03-01

    Full Text Available The objective of the study was to determine the dependency of the net income from the sales of new and significantly modernised products on the expenditure on (1 marketing and staff training as well as on the expenditure on (2 land, buildings and structures; machinery, technical equipment and tools; and means of transportation within the scope of product and process innovations in Polish industry in 2010. Furthermore the study was intended to determine the effectiveness of the abovementioned expenditure aggregated to descriptive variables (1 and 2. In the study, the correlation and regression methods as well as the least squares method was applied.The estimation resulted in the determination of functional dependency of net sales income on the expenditure on marketing and staff training (0.5040 as well as on the expenditure on land, buildings and structures; machinery, technical equipment and tools; and means of transportation (0.8064 in the field of innovative processes in industry. The net sales income increased more than proportionally relative to the combined effect of the aforementioned expenditure (1.3104. The total increase in the aforementioned expenditure by 10% resulted in the increase in net sales income by 13.1%. The determined power regression model may have practical implications for the economic evaluation of expenditure in innovative processes in Polish industry in the future, as well as for the forecast (prediction.The expenditure application in innovative processes may also have social implications connected to the increase in the value-in-use of products and with the increase in the social efficiency of work in Polish industry.

  11. Transformation of Bread Industry Structure by Consumer Tastes and Innovation

    OpenAIRE

    丸山, 泰広; 豊, 智行; 福田, 晋; 甲斐, 諭

    2003-01-01

    Bread industry is classfied two types of business. One type is Bread manufacturer which makes bread and sells them to retailer and supermarket. Another type is Bread self-making bakery which makes bread by themselves and directly sells them to consumer. Bread consumer tastes are freshness and diversification. Bread manufacturar copes with diversification by naking many items. Bread self-making bakery copes with freshness by directly providing consumer. But by a innovation a new group is organ...

  12. Innovation and Internationalization of Hungarian SMEs in the IT Industry

    Directory of Open Access Journals (Sweden)

    Csonka László

    2014-10-01

    Full Text Available The aim of this paper is to look at the extent and type of internationalization among Hungarian information technology (IT small- and medium-sized enterprises (SMEs and the possible relationship between the degree of innovativeness and the internationalization of these companies. Information technologies play an important role in the Hungarian economy: this sector is one of the most R&D intensive industries in which many SMEs are active.

  13. Innovation process in industrialized countries of Western Europe. Vol. 3. Innovations in the power industry. Der Innovationsprozess in westeuropaeischen Industrielaendern. Bd. 3. Innovation in der Energiewirtschaft

    Energy Technology Data Exchange (ETDEWEB)

    Ray, G F [National Institute of Economic and Social Research, London (UK)

    1979-01-01

    A group of European economic research institutes as well as a group of sociologists working in the Social Sciences Department of the University of Hamburg examined the industrial innovation process in companies situated in the Federal Republic of Germany, Great Britain, and Sweden. The following institutes were members of the group of economic research institutes: The Ifo-Institute for Economic Research at Munich, which also assumed coordinating responsibilities, the National Institute of Economic and Social Research, London, as well as the Industriens Utredningsinstitut, Stockholm. The purpose of this multinational project was to examine the process of research work in development and application of technologies using cases of innovation found in the energy industry. The study was intended to lead innovation research out of its methodical and scientific isolation to bridge certain gaps found in the existing innovation research work and thus to provide politicians and innovators in the major industrialized countries of the Western World with useful tools for decision making. Volume 3 contains the general development of the world energy situation and of problems of energy policy to be found in the three countries. Furthermore, it contains detailed studies of the innovation process of the latest major individual technologies to be found in this field.

  14. China's wind industry: Leading in deployment, lagging in innovation

    International Nuclear Information System (INIS)

    Lam, Long T.; Branstetter, Lee; Azevedo, Inês M.L.

    2017-01-01

    China's massive carbon emissions and air pollution concerns have led its government to embrace clean energy innovation as a means of transitioning to a more sustainable energy system. We address the question of whether China's wind industry has become an important source of clean energy technology innovation. We find that in terms of wind capacity expansion, China has delivered enormous progress, increasing its wind capacity from virtually no wind capacity in the early 2000s to 140 GW by 2015. However, in terms of innovation and cost competitiveness, the outcomes were more limited: Chinese wind turbine manufacturers have secured few international patents and achieved moderate learning rates compared to the global industry's historical learning rate. Leading China-based indigenous producers are likely to remain important global players for the foreseeable future, but further progress in reducing the cost of capital equipment may slow relative to the recent past. However, opportunities in lowering curtailment rates and improving turbine quality can reduce China's overall levelized cost of electricity for wind. - Highlights: • Analyze wind power patenting trends of Chinese inventors and firms. • Many Chinese patents, though few were granted by foreign patent offices. • Chinese international patents are less likely to be cited than foreign counterparts. • China's wind industry managed to reduce production costs, but learning rate is low.

  15. Neo-industrialization of Kuzbass economy in innovative development of coal industry and machinery

    Directory of Open Access Journals (Sweden)

    Balabanova Anna

    2017-01-01

    Full Text Available As part of rental-resource model and access restrictions to capital and new technologies, the attempts to encourage import substitution made by the government do not generate innovative type of economic development and reconstruction of economy’s manufacturing industry competitive on the domestic market. In conditions of searching for a new model of Russian economy development the analysis of a number of problems such as industry degradation, reducing the competitiveness of Russian producers, the growth of structural imbalances and overcoming the negative macroeconomic trends becomes strategically important. This raises the value of neo-industrialization as the integrator of resource security, scientific and industrial potential of Russian economy and high capacity of the domestic market in the innovative development system. A special role neo-industrialization plays for the economic development of old industrial regions, which include Kuzbass (Western Siberia, Russia. Neo-industrial development of Kuzbass economy should be initiated by the technological modernization of mining machinery and innovative development of coal industry.

  16. Innovation Barriers and Enablers that Affect Productivity in Uganda Building Industry

    OpenAIRE

    Henry Mwanaki Alinaitwe, , and; Kristian Widén; Jackson Mwakali; Bengt Hansson

    2007-01-01

    The construction industry has of recent been blamed for lack of innovation. Lack of innovation in the industry is believed to be responsible for the decreasing or stagnant levels of productivity in comparison with other industries. This paper reviews the major barriers and enablers to innovation in general. Propositions were made about the factors that affect innovation in the construction industry which were then formulated into a questionnaire. A survey was made on building contractors in U...

  17. CASE ANALYSIS OF INNOVATION IN THE PACKAGING INDUSTRY USING THE CYCLIC INNOVATION MODEL

    OpenAIRE

    NICHOLAS FORD; PAUL TROTT; CHRIS SIMMS; DAP HARTMANN

    2014-01-01

    This paper builds upon Berkhout et al.’s (2010) cyclic innovation model (CIM). This model was shown to provide an effective framework for understanding and managing the innovation process and to address many of the shortcomings of previous models. Building on that article we have applied CIM to an in-depth case study featuring a formable paperboard technology within the packaging industry. Using data gathered from 28 interviews conducted over a three year period, CIM, for the first time, is a...

  18. Innovation and greenhouse gas reductions in the Canadian energy industry

    Energy Technology Data Exchange (ETDEWEB)

    Potter, I.J. [Alberta Research Council, Edmonton, AB (Canada); Stewart, B. [Natural Resources Canada, Devon, AB (Canada). CANMET Western Research Centre

    2005-07-01

    Canada's hydrocarbon industry must address the challenges presented by the Kyoto Protocol in order to thrive. This paper argued that technological innovations are the primary means of creating long-term options to provide clean hydrocarbon energy. Both federal and provincial governments have developed energy policies to ensure environmental stewardship, promote economic growth, and create a diversified energy sector. While the Canadian energy industry funds and undertakes a significant amount of research and development, government programs must continue to show leadership in research and development activities. In order to ensure Canada's future prosperity, research and innovation programs must expand. Adequate commercialization processes must be in place. Industry and government programs must also link market needs with research directions. Enhanced research coordination is needed between government agencies, research agencies, and educational facilities. Future research and development agendas must be designed to focus on energy technology developments that offer Canada a competitive advantage. The Cleaner Hydrocardon Technology Futures (CHTF) Group has recently focused on 5 key areas in which Canada's energy industry can contribute to a clean hydrocarbon future: (1) clean coal; (2) oil sands and heavy oil; (3) conventional and unconventional oil and gas; (4) carbon capture, use and storage; and (5) hydrocarbon to hydrogen bridging technologies. Investments in research and development in all 5 areas are expected to create a suite of new transformational technologies that will sever the relationship between GHG emissions and the continued production of hydrocarbons. A systems approach was recommended to encourage the creation of new networks and increase Canada's capacity to nurture science and technology innovation. Directions advocated by the EnergyINet have also been embraced by universities and research organizations in western Canada. It

  19. COST-EFFECTIVENESS OF INNOVATIVE TECHNOLOGIES BAKING INDUSTRY

    Directory of Open Access Journals (Sweden)

    I. P. Bogomolova

    2014-01-01

    Full Text Available Summary.Research priorities is the development of food therapeutic and prophylactic purposes, innovative methods of complex processing of raw materials with maximum preservation of the original chemical composition and on the basis of a new product release in generation functionality. This article explores the many reasons for the lag of the Patriotic-owned enterprises in terms of technological development, analyzes the features of innovation in the bakery production of Russia, proposed the current directions for the innovative development of grain-processing industry. The observation revealed that during the years of market transformations in the bakeries have been significant changes, especially in the volume of products sold. Based on the results of statistical studies, it was found that at least 75% of the population consume daily baked goods and this makes them appropriate nutrient enrichment. The current state and bakeries, bakeries and revealed a high degree of wear of the process equipment. Over the past 14 years, marked by a decline in production, which led to a decline in production output and profitability constraints. It was found that in bakeries and bakeries deterioration index technique is approximately 67%. With respect to raw materials for bread production, noted that the creation of a civilized grain market in Russia requires the solution of a number of key issues. It is established that is currently happening aggression from industrialized countries to seize the Russian food market, leading to a narrowing of the domestic demand for domestic products, and this causes the drop in the economic growth of the food industry. The analysis revealed that there is considerable potential for the development of the industry.

  20. Service Innovation and Customers’ Involvement in Service Industry in Kosovo

    Directory of Open Access Journals (Sweden)

    MSc. Vjosa Mullatahiri

    2014-06-01

    Full Text Available New developments in the economic arena and rapid technological changes have shifted the economic power from company to customer. As a result, companies changed their approach toward customers’ involvement in new product and/or service development. Usually, innovations are driven by inventions. But not all inventions are successful innovations. Hence, to be successful, inventions should be explored to meet customer needs and demands, and commercialized to make the company profitable (DTI - Occasional Paper No 9, 2007. According to Lowe and Marriott (2006 the innovation is a process of creating and transforming products, services, and organizational processes that are crucial for companies who want to compete in a highly dynamic and competitive market. In this regard, the paper aims to explore the interrelation between market and innovation in services industry, whilst analyzing both customers’ impact in new service development (NSD and Kosovo’s service providers approach in including customers in service development processes. The findings highlight an increased customer power over the NSD processes as a result of their demand and unwillingness to bear the cost of or experiment with new, untested services. Given these developments service providers have started to change their approach of creating and transforming services, namely by involving customers in the service design and development processes, in order to stimulate interest for using and willingness to pay for new service.

  1. Governance of innovative cleantech retrofitting in the shipping industry?

    DEFF Research Database (Denmark)

    Hermann, Roberto Rivas; Smink, Carla; Kerndrup, Søren

    Air pollution from maritime transportation has become an important public health and environmental concern. As result, new international regulations seek to reduce the pollutants issuing from marine fuels combustion. Marine cleaner technology has been regarded as the key solution to comply...... with regulations and reduce operation costs. However, definitions of maritime cleantech differ and range from end-of-pipe pollution control equipment, more efficient engines, improved hull-design and alternate propulsion fuels (LNG, methanol). Different constellations of actors seem to follow different cleantech...... trajectories. It is therefore important to develop new forms of governance in order to create innovations which are comparable with the state of art in other industries and new ways of building networks and partnerships. The paper aims to improve the understanding of cleaner technology as innovative...

  2. Barriers to innovation in small-scale industries: case study from the briquetting industry in India

    NARCIS (Netherlands)

    Clancy, Joy S.

    2001-01-01

    This paper focuses on the innovation process in small- and medium-scale industries in developing countries, raking the briquetting (densification of biomass) as a case study. The technical efficiency was found to vary significantly between firms, which can be attributed to the lack of technological

  3. Is Industry-University Interaction Promoting Innovation in the Brazilian Pharmaceutical Industry?

    Science.gov (United States)

    Paranhos, Julia; Hasenclever, Lia

    2011-01-01

    This paper analyses industry-university interaction and its characteristics in the Brazilian pharmaceutical system of innovation, taking account of the relevance of company strategies, the approach of the universities and the actions of government. By analysing primary and secondary data the authors show that, for as long as corporate investment…

  4. Critical brand innovation factors (CBIF): understanding innovation and market performance in the Chinese high-tech service industry

    OpenAIRE

    Nguyen, Bang; Yu, Xiaoyu; Melewar, T. C.; Gupta, Suraksha

    2016-01-01

    Brand innovation sweeps aside established practices and disrupts the status quo, resulting in the transformation of markets. The present study develops and tests a model of critical brand innovation factors (CBIF) by examining key factors influencing firm-level brands' innovation and increased market performance. Adapting both organizational elements and market response characteristics, the model integrates four key variables in China's industrial service markets: innovation, internationaliza...

  5. CREATIV: Research-based innovation for industry energy efficiency

    International Nuclear Information System (INIS)

    Tangen, Grethe; Hemmingsen, Anne Karin T.; Neksa, Petter

    2011-01-01

    Improved energy efficiency is imperative to minimise the greenhouse gas emissions and to ensure future energy security. It is also a key to continued profitability in energy consuming industry. The project CREATIV is a research initiative for industry energy efficiency focusing on utilisation of surplus heat and efficient heating and cooling. In CREATIV, international research groups work together with key vendors of energy efficiency equipment and an industry consortium including the areas metallurgy, pulp and paper, food and fishery, and commercial refrigeration supermarkets. The ambition of CREATIV is to bring forward technology and solutions enabling Norway to reduce both energy consumption and greenhouse gas emissions by 25% within 2020. The main research topics are electricity production from low temperature heat sources in supercritical CO 2 cycles, energy efficient end-user technology for heating and cooling based on natural working fluids and system optimisation, and efficient utilisation of low temperature heat by developing new sorption systems and compact compressor-expander units. A defined innovation strategy in the project will ensure exploitation of research results and promote implementation in industry processes. CREATIV will contribute to the recruitment of competent personnel to industry and academia by educating PhD and post doc candidates and several MSc students. The paper presents the CREATIV project, discusses its scientific achievements so far, and outlines how the project results can contribute to reducing industry energy consumption. - Highlights: → New technology for improved energy efficiency relevant across several industries. → Surplus heat exploitation and efficient heating and cooling are important means. → Focus on power production from low temperature heat and heat pumping technologies. → Education and competence building are given priority. → The project consortium includes 20 international industry companies and

  6. Perspectives on Industrial Innovation from Agilent, HP, and Bell Labs

    Science.gov (United States)

    Hollenhorst, James

    2014-03-01

    Innovation is the life blood of technology companies. I will give perspectives gleaned from a career in research and development at Bell Labs, HP Labs, and Agilent Labs, from the point of view of an individual contributor and a manager. Physicists bring a unique set of skills to the corporate environment, including a desire to understand the fundamentals, a solid foundation in physical principles, expertise in applied mathematics, and most importantly, an attitude: namely, that hard problems can be solved by breaking them into manageable pieces. In my experience, hiring managers in industry seldom explicitly search for physicists, but they want people with those skills.

  7. Innovation performance and competitive strategies in the Turkish manufacturing industry

    OpenAIRE

    Ulusoy, Gündüz; Ulusoy, Gunduz; Yeğenoğlu, Hande; Yegenoglu, Hande

    2007-01-01

    In this paper, we report on empirical investigation within the context of the Innovations in Manufacturing Industries in Turkey Study 2004/2005. The data was gathered in nine different cities in Turkey during the period August 2004 – January 2005. The survey was conducted through face-to-face interviews due to the complex nature of the survey and was implemented in 135 manufacturing firms operating in four sectors: Textiles, chemicals, food, and metal. The study has been an extension of the E...

  8. Innovation in product and services in the shipping retrofit industry

    DEFF Research Database (Denmark)

    Hermann, Roberto Rivas; Köhler, Jonathan

    regulation could create innovation in green products and services in the maritime retrofitting industry?” Our case study focus on business models for the development, installation and operation of ballast water management systems in Denmark. We engaged the perspectives of ship-owners, equipment manufacturers....... Similarly, given the deindustrialisation dynamics to regions with lower manufacturing costs, it is argued that a combination of knowledge intensive and service-based economy will eventually fill the gap left by manufacturing industries. To create added value to their products, some leading firms...... are increasingly developing product-service systems. It is however, argued that product-service systems are not always sustainable, and thus little evidence connect them with green growth. To fill in this gap, we are carrying a case study guided by the following research question: “How the ballast water treatment...

  9. Investment-innovation mechanism of ensuring competitiveness of industrial enterprises

    Directory of Open Access Journals (Sweden)

    Kozyk Vasyl V.

    2014-01-01

    Full Text Available The article considers the process of formation of the investment-innovation mechanism of ensuring competitiveness of industrial enterprises. It identifies the essence, composition, goals and means of functioning of this mechanism. It establishes sequence of the process of functioning of the investment-innovation mechanism of ensuring competitiveness of economic subjects. It marks out such particular types of this mechanism: mechanism of renovation of fixed assets of an enterprise, mechanism of formation of channels and network of sales of enterprise products, mechanism of expansion of production capacity of the enterprise on manufacture of traditional types of products, mechanism of introduction of new progressive production processes, mechanism of development and production of innovation products, and mechanism of reduction of the level of risk of investment activity of the enterprise. The article conducts modelling of the process of development and realisation of investment solutions on introduction of progressive technologies of manufacture of products at the enterprise. It offers a method of selection of the most competitive variant of technology of manufacture of products depending on the level of quality and also specific current capital outlays for their manufacture.

  10. Collaborative Innovation Research on High-tech Industry in the Center Delta

    Directory of Open Access Journals (Sweden)

    Yan Jingdong

    2017-01-01

    Full Text Available As a strong point in the Middle Rises Strategy, the Center Delta is of great significance to high-tech industry development. While the collaborative innovation is an effective way to promote the coordinated development of regional economy. This article selected electronic and communication equipment manufacturing industry of 3 provinces in the Center Delta as samples, built evaluation index system of collaborative innovation of high-tech industry, and put the relevant data into the system coordination degree model, in order to get the synergy of industrial innovation system and innovation environment system of 3 provinces. The empirical results shown that the industrial innovation system and innovation environment system coordination degree of Hubei province was the highest, while Jiangxi province was the lowest. Based on the empirical result analysis of the above-mentioned systems, this article put forward suggestions to promote the development of the high-tech industry collaborative innovation in the Center Delta.

  11. The state of the art of innovation-driven business models in the financial services industry

    NARCIS (Netherlands)

    Lüftenegger, E.R.; Angelov, S.A.; Linden, van der E.; Grefen, P.W.P.J.

    2010-01-01

    Emerging innovation-driven business models are changing the financial services landscape. Most companies are using innovation to sustain their business models. However, new entrants into the financial services market innovate in a way that disrupts the industry. Typically, directions for innovation

  12. Innovation Level of Sustainable Practices Adopted in Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Simone Sehnem

    2016-07-01

    Full Text Available This research aimed to identify the level of innovation of sustainable practices by industrial companies. This is a descriptive study that made use of a questionnaire answered by 50 industrial companies. The results show that environmental practices at full level by 68% of businesses are monitoring the risks and opportunities for the organization's activities due to climate change; 56% of companies surveyed are waste separation; followed by the realization of related health and safety training at work in 52% of cases surveyed; and 48% monitoring and recording of injuries, the injury rate, the rate of occupational diseases, lost days, absenteeism and number of work-related fatalities for all workers. Among the practices adopted not stand out incineration (burning mass (80% of companies surveyed; hiring indigenous and tribal employees (68%; composting (64% and use of surface water in the process. Therefore, the study contributed to the disclosure cleaner called production innovations and also pipe end technologies. Some social practices that signal a commitment of the organizations with human resources and the humanization and also economical focused on continuous improvement.

  13. Product Innovation Development in the Companies of Creative Industries

    Directory of Open Access Journals (Sweden)

    Rolandas Strazdas

    2011-10-01

    Full Text Available Many authors distinguish product innovation as a key factor for long-term competitiveness. Dominant narrow perception of a product is leading towards incorrect product development process and the consequent result is a bad product. Narrow perception of a product is one of the main paralysing factors affecting the creator in the process of product development, which leads towards a low level of product innovation. As a result, a company is losing its uniqueness, originality, and is not of  interest neither for consumers nor the product developers themselves. This article deals with the product perception problems in the companies of creative industries. The main limiting factors for the perception of a product are analysed in the article as well as possibilities to expand the perception of a product. Five main product development methods: conservative, delegative, holistic, limited open, fully open are described in the article. The choice of the product development methods is especially important for the creative industries companies whose product development process is very intensive. 

  14. Nuclear and radiation applications in industry: Tools for innovation

    International Nuclear Information System (INIS)

    Machi, S.; Iyer, R.

    1994-01-01

    Applications of nuclear and radiation technologies have been contributing to industrial efficiency, energy conservation, and environmental protection for many years. Some of these are: Manufacturing industries: Radiation processing technologies are playing increasing roles during manufacturing of such everyday products as wire and cable, automobile tires, plastic films and sheets, and surface materials. Production processes: Other techniques employing radioisotope gauges are indispensable for on-line thickness measurements during paper, plastic, and steel plate production. Processing and quality checks are made using nucleonic control systems that are common features of industrial production lines. Sterilization of medical products using electron beam accelerators or cobalt-60 radiation is better than the conventional methods. Industrial safety and product quality: Non-destructive examination or testing using gamma- or X-ray radiography is widely used for checking welds, casting, machinery, and ceramics to ensure quality and safety. Additionally, radiotracer techniques are unique tools for the optimization of chemical processes in reactors, leakage detection, and wear and corrosion studies, for example. Environmental protection: An innovative technology using electron beams to simultaneously remove sulfur dioxide (SO 2 ) and nitrogen oxides (NO x ) has been under development. The electron beam technology is very cost competitive and its byproduct can be used as agricultural fertilizer

  15. Innovative Marketing Strategies for National Industrial Flagships: Brand Repositioning for Accessing Upscale Markets

    NARCIS (Netherlands)

    Todiras, A.; Nijkamp, P.; Rafijeras, S.

    2011-01-01

    Product and process innovations are generally regarded as strategic competitive vehicles in industry. Identifying and conquering new market niches through focused marketing approaches - by emphasising new product qualities in mature markets - has become a very appropriate innovation strategy. This

  16. Innovation in industry and the diffusion of technology.

    Science.gov (United States)

    Utterback, J M

    1974-02-15

    The varied definitions used in the sources that have been discussed make any aggregate analysis difficult. A simple three-stage analysis of flows to, from, and within the firm was used to facilitate comparisons. Even so, each of the generalizations is drawn from relatively small and unrepresentative samples. Case studies may continue to be a source of ideas and hypotheses for further research, but do not appear to offer a means for deeper understanding of the innovation process. The retrospective nature of nearly all of the sources discussed probably means that the process has been viewed as much more rational and well-ordered than it is in fact. This failing is partially overcome in firsthand accounts such as those of Suites and Bueche (63) and Frey and Goldman (64). Each of these accounts involves a successful innovation according to technical or commercial criteria, or both. However, many of the characteristics of innovations that have failed commercially (10) appear to be similar to those of successful cases. The few longitudinal studies, and studies comparing more and less successful cases, do support the main conclusions drawn above (10, 32, 38). More serious problems are raised by the distinctly nonrepresentative nature of the samples used. There are few cases (17, 33, 65) in which the contributions of more than one organization, or details of interactions over a significant period of time, are discussed. There is a wide variation in the importance of the innovations included, ranging from those affecting the economy as a whole to cases involving production in a single firm, albeit with significant commercial results (66). In addition to questions of comparability and sampling, a central problem for further research on innovation will be to devise an operational model to account for interfirm and interindustry differences. Polar definitions used in past studies, "high technology" and "mature industry," for example, are insufficient. One possibility is to use

  17. Establishing a Commercialization Model for Innovative Products in the Residential Construction Industry

    OpenAIRE

    McCoy, Andrew Patton

    2007-01-01

    Throughout the world, innovation is viewed as a critical factor in the future health of the construction industry. There is universal interest in successful commercialization of innovative construction products. This thesis focuses on the US construction industry's ability to successfully commercialize innovative products. US small, limited-resource innovators will be key players in this success. Recent failures of entrepreneurial business ventures in the commercialization of such product...

  18. Industry perspectives on market access of innovative drugs

    Directory of Open Access Journals (Sweden)

    Kim ePauwels

    2016-06-01

    Full Text Available This study presents industry perspectives on the challenges related to market access of innovative drugs in general and oncology drugs in specific. Fifteen interviews were conducted with representatives of pharmaceutical companies and industry associations. Interviewees call for a broader recognition of value within the assessment and appraisal of drugs. According to interviewees, focus on value is jeopardized by the lack of a common value definition across Europe, poor availability and validity of value measures and cost-saving measures such as external reference price setting and cost-effectiveness analysis at the side of the payers. Centralized assessment of relative-effectiveness at European level would provide a common value estimate across member states, independent of financial drivers. Empirical evidence on patient reported outcomes and societal preferences is however essential in the development of a value definition. Furthermore, value-based pricing would imply a dynamic approach where the price is differentiated across indications and across the lifecycle of the drug, especially in fields such as oncology. Financial drivers however also threat the application of value-based pricing at the side of the industry, making value-based profitability a more appropriate term.

  19. Innovation Networks: the Contribution of Partnerships to Innovative Performance of Firms in the Brazilian Electrical-Electronics Industry

    Directory of Open Access Journals (Sweden)

    Silvye Ane Massaini

    2015-01-01

    Full Text Available Innovation networks have been identified in the literature as a way to complement firms’ innovative capabilities through collaboration with other partners. To provide empirical evidence for this assertion, this paper investigates the contribution of partners established in innovation networks for innovative performance of firms in the Brazilian electricalelectronics industry. For this purpose, we carried out an exploratory and descriptive survey among 185 companies. The data were analyzed using structural equation modeling (SEM. As the main findings, we observed that the establishment of collaborative relationships with customers, competitors and universities/research institutions can contribute to organizational and process innovation. However, despite obtaining some significant results concerning the contribution of different partners in the network, electrical-electronics industry companies also attach great importance to internal activities to develop their innovations.

  20. Industry Relatedness and Post-Acquisition Innovative Performance

    DEFF Research Database (Denmark)

    Cefis, Elena; Marsili, Orietta; Rigamonti, Damiana

    2015-01-01

    This paper examines how characteristics of acquiring and acquired firms influence the curvilinear (inverted U-shaped) relationship between relatedness and post-acquisition innovative performance. Using a relatedness index based on industry co-occurrence in a sample of 1,736 Dutch acquisitions, we...... find that acquirer's internal R&D and acquisition experience, and the small size of acquired firms, help to reach a balance between exploration of novelty and exploitation of synergies in unrelated acquisitions, and to achieve higher post-acquisition performance. However, while the acquirer's R......&D increases flexibility in the acquisition process in presence of deviations from the optimal level of relatedness, acquisition experience may enhance rigidities....

  1. Radiation and applications: Technical innovation made by industrial irradiation procedures

    International Nuclear Information System (INIS)

    Wiesner, L.

    1986-01-01

    The innovation represented by irradiation as a means of industrial process technology lies in the very special way in which energy is introduced into some object in which it initiates reactions. This is based on the penetrating capability of ionizing radiation, which can produce reactive species, especially radicals, inside an object without requiring the whole object to be subjected to such conditions as, e.g., high temperatures or pressures, which would otherwise be needed to initiate the corresponding reactions. This unique advantage of triggering off reactions by means of ionizing radiation results in possibilities of process technology no other procedure can offer. An aspect becoming more and more important is the possibility to replace expensive materials hard to process by cheaper materials brought into a specific form more easily. Irradiation processes can assign to these materials at least some of the properties and combinations of properties, respectively, of higher-grade materials. (orig.) [de

  2. Innovative model of development of traditionally industrial territories

    Directory of Open Access Journals (Sweden)

    Olga Anatolyevna Kozlova

    2012-09-01

    Full Text Available The consideration in this paper is given to innovative model of development of traditionally industrial territories. We emphasize the following basic approaches to the employment of innovative potential of territories: diversification and restructuring of local economy, integration and disintegration of life-sustaining activity of neighboring territories, progressive economic advance, as well as simultaneous combination of several approaches (mixed model. Progressive model of development is sufficiently popular and is related tothe increasing already existing potential of territories. In practice,it doesn’t generally suppose essential changes in sectoral structure of local economy and means developing existing productions and spheres of activity of territory. Mixed model of structural transformations is characterized through the fact, that it supposes simultaneous use of different elements from the models counted. It allows: firstly, to adopt in a bigger extent a complex of measures to conditions of certain territory; secondly, to take into account a broader range of exogenous and endogenous factors; thirdly, to raise the effectiveness of the program of structural transformations being realized

  3. Management Activity Linkages to Innovation Deconstruction: An Exploratory Study of the Furniture Industry in Croatia

    Directory of Open Access Journals (Sweden)

    Andreja Pirc Barčić

    2016-03-01

    Full Text Available Corporate leaders often view innovation as a key contributor to superior profits, market sharing, and competitive positioning. However, confusion regarding the definition of innovation, how to create it, and how to implement it remains. In countries that are recent European Union members, little research has been done on innovation and how innovation is related to corporate management activities. In this study, the linkages were examined in the Croatian furniture industry. The first part of the study was to deconstruct innovation into three components: product innovation, production process innovation, and human resource innovation. The second part of the study evaluates the relationships between these innovation components and four company management activities/factors (research and development investments, company flexibility, export activity, and the Internet usage were examined. Scale testing resulted in valid deconstruction measures of innovation. Hypothesized correlations between innovation components and company management factors were supported, although the results were not fully consistent with those of previous studies.

  4. Innovative Integrated Management System (IIMS for Sustainable Food Industry

    Directory of Open Access Journals (Sweden)

    Suttiprasit Prasert

    2014-11-01

    Full Text Available It is evident that the long-term survival and growth of global food industry depend on the availability and efficient use of raw materials, energy and water and other facilities under the concept of sustainable practice, i.e. in environment, society and economics. Quality and safety managements are essential to ensure that the industry can continue to support the communities in which it operates. Awarding a number of certifications to show the high standing of international quality and hygiene characteristics are currently necessary, e.g. ISO 9001: 2000, GMP/GHP, HACCP, ISO 22000, BRC and etc. To minimize the cost and maximize the efficiency, the Innovative Integration Management System (IIMS has been implemented effectively under the frameworks of sustainability in a numbers of national and international food production companies in Thailand during the past years. This will allow the organization to integrate all common processes such as management review, document control, record control, training, monitoring & measuring, data analysing, internal audits, and corrective and preventive actions whereas the critical or specific processes required by each standard are still retained harmoniously with the others.

  5. Innovative Development of Building Materials Industry of the Region Based on the Cluster Approach

    Directory of Open Access Journals (Sweden)

    Mottaeva Asiiat

    2016-01-01

    Full Text Available The article discusses issues of innovative development of building materials industry of the region based on the cluster approach. Determined the significance of regional cluster development of the industry of construction materials as the effective implementation of the innovative breakthrough of the region as an important part of strategies for strengthening innovation activities may be to support the formation and development of cluster structures. Analyses the current situation with innovation in the building materials industry of the region based on the cluster approach. In the course of the study revealed a direct correlation between involvement in innovative activities on a cluster basis, and the level of development of industry of construction materials. The conducted research allowed identifying the factors that determine the innovation process, systematization and classification which determine the sustainable functioning of the building materials industry in the period of active innovation. The proposed grouping of innovations for the construction industry taking into account industry-specific characteristics that reflect modern trends of scientific and technological progress in construction. Significance of the study lies in the fact that the proposals and practical recommendations can be used in the formation mechanism of innovative development of building materials industry and the overall regional construction complex of Russian regions by creating clusters of construction.

  6. Special COP 21 - Stakes and actors

    International Nuclear Information System (INIS)

    Chauveau, Loic; Dupain, Julien; Descamps, Olivier; Blosseville, Thomas; Connors, Anne; Canto, Albane; Robischon, Christian; Boedec, Morgan; Tubiana, Fabian; Bomstein, Dominique

    2015-01-01

    A first set of article comments and discusses the various stakes and challenges of the 21. Conference of Parties (COP 21): the negotiation process which resulted in a synthesis which is to be signed by 95 States in Paris, the elaboration of an Agenda of solutions with the commitment of enterprises and local authorities, the issue of international financing as some promises remained not kept for the support to adaptation of developing countries. A second set of articles addresses the involved actors and their technological or economic challenges: the needed evolution of energy (electricity, heat, gas, fuel) producers away from fossil energies to reduce greenhouse gas emissions, the strategy of the French company Engie in the field of photovoltaic, wind and more generally renewable energies, innovating trends of decentralisation of energy production (offshore wind energy, hydrogen, plasma torch, flexible photovoltaic arrays, the wind tree, the floating wind turbine, new technologies for solar arrays), the perspectives for industrial sectors concerned by energy transition (with the example of Schneider Electric), emerging technologies (oil lamp, new boilers, desalination equipment, storage of wind energy, co-generation), developments and perspectives in the transport sector (example of Renault, new technologies for hybrid propulsion, bio-refineries, reduction of fuel consumption, hybrid aircraft, and heat management in railways) and in the building sector (new standards and applications, new building materials). A last article outlines the threat that climate can be for profitability and the taking of the carbon risk into account by the insurance and financial sectors

  7. Industry Support Institutions Fostering Innovations Culture among SME’s of Punjab, India: A Strategic Perspective

    Directory of Open Access Journals (Sweden)

    B.S. Sangha

    2013-09-01

    Full Text Available . The present paper attempts to investigate the role of six Industry Support Institutions in fostering innovation culture in manufacturing sector of Punjab in India. Some path breaking technological innovations have been introduced by the Institutions. These highly interactive, self-reliant institutes are the virtual In-house R&D to SMEs. Knowledge accumulations in the institutes also offer a platform for exchange of ideas which further facilitate the process of open innovation. The speedy and efficient dissemination of technical know-how by these institutes have brought creativity and innovativeness among SMEs of the region.  Keywords: Industry Support Institutions, Open Innovation, Small and Medium Enterprises.

  8. Industrial Engineering : Innovative Networks - 5th International Conference on Industrial Engineering and Industrial Management

    CERN Document Server

    Bogataj, Marija; Ros-McDonnell, Lorenzo

    2012-01-01

    The Spanish Conference of Industrial Engineering /Ingeniería de Organización Industrial (CIO) is an annual meeting promoted by Asociación para el Desarrollo de la Ingeniería de Organización/ Industrial Engineers Association (ADINGOR). The aim of CIO is to establish a forum for the open and free exchange of ideas, opinions and academic experiences about research, technology transfer or successful business experiences in the field of Industrial Engineering. The Scientific Committee is composed by 68 international referees and we foresee the attendance of some 200 people from more than 15 countries and following the rotation of venue and organization between various Spanish universities, the 2011 Conference will be the fifteenth National Conference and the fifth International Conference in Cartagena.   During three days the 2011 Conference will include the participation of European and other foreign countries researchers and practitioners that will presenting communications, reproduced in this volume, on ...

  9. The organizational fundamentals of innovation development management of agro-industrial enterprises

    Directory of Open Access Journals (Sweden)

    Ilona Yasnolob

    2017-05-01

    Full Text Available Modern prospects of innovation activities at agro-industrial enterprises and the conditions of innovation diffusion have been discussed. The main structure forming elements of organizing innovation activities have been characterized: personnel (people, ideas, funds, culture. The principles of organizing innovation activities at agro-industrial enterprises have been suggested. The functioning of these principles is provided by the project-matrix structure of the organization. It has been proven that the necessary conditions of effective organizing innovation activities at agro-industrial enterprises are: the distributing of roles and responsibilities; ensuring the effective distribution of information and flexibility of using resources; defining the responsibility for the made decisions. The practical importance of the investigation consists in developing concrete methodological foundations the using of which allows to raise the effectiveness of innovation activities at agro-industrial enterprises.

  10. A framework for studying the importance of open innovation in the maritime industry

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Vidic-Perunovic, Jelena

    The industry leaders require from maritime organizations to open up their innovation processes. The question is if the industry is ready for that? In this paper we theorize about that possibility and develop a framework for studying the importance and relevance of open innovation for the maritime...

  11. Towards innovative environmental management in the agro-food industry

    NARCIS (Netherlands)

    Bremmers, H.J.; Haverkamp, D.J.; Sabidussi, A.; Omta, S.W.F.

    2008-01-01

    This article focuses on the problem: what external (stakeholder) and internal (structural/organizational) factors drive companies in the food- and agribusiness towards innovative environmental management? Innovative companies are those considered to have adopted a supply-chain perspective, instead

  12. An empirical study of innovation-performance linkage in the paper industry

    Science.gov (United States)

    Farooquie, Parveen; Gani, Abdul; Zuberi, Arsalanullah K.; Hashmi, Imran

    2012-10-01

    To enter new markets and remain competitive in the existing markets, companies need to shift their focus from traditional means and ways to some innovative approaches. Though the paper industry in India has improved remarkably on its technological and environmental issues, yet it shows a low rate of innovation. The present paper attempts to review the industry in the perspective of technological innovations and investigates empirically the role of innovations in performance improvement and pollution control. Multivariate analysis of variance and discriminant function analysis are applied for data processing. The findings reveal that the mean scores on the factors, such as sales, quality, and flexibility, are higher for the good innovators than those for the poor innovators. Conversely, the factors which are likely to be reduced as a result of innovations, such as time, cost, emissions, and disposal of waste, have shown higher means for the poor innovators.

  13. Drivers of multidimensional eco-innovation: empirical evidence from the Brazilian industry.

    Science.gov (United States)

    da Silva Rabêlo, Olivan; de Azevedo Melo, Andrea Sales Soares

    2018-03-08

    The study analyses the relationships between the main drivers of eco-innovation introduced by innovative industries, focused on cooperation strategy. Eco-innovation is analysed by means of a multidimensional identification strategy, showing the relationships between the independent variables and the variable of interest. The literature discussing environmental innovation is different from the one discussing other types of innovation inasmuch as it seeks to grasp its determinants and to mostly highlight the relevance of environmental regulation. The key feature of this paper is that it ascribes special relevance to cooperation strategy with external partners and to the propensity of innovative industry introducing eco-innovation. A sample of 35,060 Brazilian industries were analysed, between 2003 and 2011, by means of Binomial, Multinomial and Ordinal logistic regressions with microdata collected with the research and innovation department (PINTEC) from the Brazilian Institute of Geography and Statistics (Instituto Brasileiro de Geografia e Estatística). The econometric results estimated by the Logit Multinomial method suggest that the cooperation with external partners practiced by innovative industries facilitates the adoption of eco-innovation in dimension 01 with probability of 64.59%, 57.63% in dimension 02 and 81.02% in dimension 03. The data reveal that the higher the degree of eco-innovation complexity, the harder industries seek to obtain cooperation with external partners. When calculating with the Logit Ordinal and Binomial models, cooperation increases the probability that the industry is eco-innovative in 65.09% and 89.34%, respectively. Environmental regulation and innovation in product and information management were also positively correlated as drivers of eco-innovation.

  14. Market structure and the incentives to innovate in the Norwegian music industry

    OpenAIRE

    Engstrand, Andreas Prestegaard

    2013-01-01

    In this thesis, I study market structure and incentives to innovate in the Norwegian music industry. The industry has gone through significant changes since the year 2000. Every part of the value chain has been disrupted by technology, and the barriers to entry have decreased. However, major labels seem to have kept their market share. I define product and process innovation as respectively the release of a new artist and the release of a subsequent album. A product innovation ...

  15. Explaining Innovation. An Empirical Analysis of Industry Data from Norway

    Directory of Open Access Journals (Sweden)

    Torbjørn Lorentzen

    2016-01-01

    Full Text Available The objective of the paper is to analyse why some firms innovate while others do not. The paper combines different theories of innovation by relating innovation to internal, firm specific assets and external, regional factors. Hypotheses are derived from theories and tested empirically by using logistic regression. The empirical analysis indicates that internal funding of R&D and size of the firm are the most important firm specific attributes for successful innovation. External, regional factors are also important. The analysis shows that firms located in large urban regions have significantly higher innovation rates than firms located in the periphery, and firms involved in regional networking are more likely to innovate compared to firms not involved in networking. The analysis contributes to a theoretical and empirical understanding of factors that influence on innovation and the role innovation plays in the market economy. Innovation policy should be targeted at developing a tax system and building infrastructure which give firms incentives to invest and allocate internal resources to R&D-activities and collaborate with others in innovation. From an economic policy perspective, consideration should be given to allocating more public resources to rural areas in order to compensate for the asymmetric distribution of resources between the centre and periphery. The paper contributes to the scientific literature of innovation by combining the firm oriented perspective with weight on firm specific, internal resources and a system perspective which focuses on external resources and networking as the most important determinants of innovation in firms.

  16. Innovation Training within the Australian Advanced Manufacturing Industry

    Science.gov (United States)

    Donovan, Jerome Denis; Maritz, Alex; McLellan, Andrew

    2013-01-01

    Innovation has emerged as a core driver for the future profitability and success of the manufacturing sector, and increasingly both governments and the private sector are examining ways to support the development of innovation capabilities within organisations. In this research, we have evaluated a government-funded innovation training course…

  17. Essays on Innovation Ecosystems in the Enterprise Software Industry

    Science.gov (United States)

    Huang, Peng

    2010-01-01

    Innovation ecosystem strategy is often adopted by platform technology owners to seek complementary innovation from resources located outside the firm to exploit indirect network effect. In this dissertation I aim to address the issues that are related to the formation and business value of platform innovation ecosystems in the enterprise software…

  18. The effects of innovation on firm performance of supporting industries in Hanoi, Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    Tuan, N.; Nhan, N.; Giang, P.; Ngoc, N.

    2016-07-01

    Innovation, including product, process, marketing, and organizational innovation within a firm, is considered as one of essential component for surviving and growing. These innovation activities create value and competitive advantages for successful organizations; therefore, understanding the organization’s overall innovation is the first and foremost to understand the role of innovation on firm performance. The objective of this research is to explore two parts: the impacts of innovation on the different aspect of innovation performance, then their effects to firm performance (production, market, and financial performance). This study uses primary data from questionnaire survey. The questionnaire involves 4 parts including general information, innovation activities; innovative performance, and firm performance. This research focuses on firms in supporting industries of mechanics, electronics, motorbike and automobile. These firms are in a list of companies (known as The Excellent Vietnamese Companies in Northern and Central Vietnam) established by JETRO and VCCI. There are 150 firms in this list. The questionnaire survey was administered to directors, CEO of those firms during April and May, 2014. Out of the 150 questionnaires sent out, 118 were valid, accounting for 78.7% of the true response rate. Analysis methodologies of reliability, factor analysis and regression are utilized in this paper. The result demonstrated there are positive effects of process, marketing, and organizational innovations on firm performance in supporting firms. More specifically, the higher the level of innovation activities is, the greater the innovative performance is, which means the larger level of Process, organization and marketing innovation activities are, the higher level of innovative performance are likely to be. Secondly, the higher level of Process, organization and marketing innovative performance, the better level of firm performances is likely to be. To sum up, in

  19. The effects of innovation on firm performance of supporting industries in Hanoi, Vietnam

    Directory of Open Access Journals (Sweden)

    Nham Tuan

    2016-04-01

    Full Text Available Purpose: Innovation, including product, process, marketing, and organizational innovation within a firm, is considered as one of essential component for surviving and growing. These innovation activities create value and competitive advantages for successful organizations; therefore, understanding the organization’s overall innovation is the first and foremost to understand the role of innovation on firm performance. The objective of this research is to explore two parts: the impacts of innovation on the different aspect of innovation performance, then their effects to firm performance (production, market, and financial performance. Design/methodology/approach: This study uses primary data from questionnaire survey. The questionnaire involves 4 parts including general information, innovation activities; innovative performance, and firm performance. This research focuses on firms in supporting industries of mechanics, electronics, motorbike and automobile. These firms are in a list of companies (known as The Excellent Vietnamese Companies in Northern and Central Vietnam established by JETRO and VCCI. There are 150 firms in this list. The questionnaire survey was administered to directors, CEO of those firms during April and May, 2014. Out of the 150 questionnaires sent out, 118 were valid, accounting for 78.7% of the true response rate. Analysis methodologies of reliability, factor analysis and regression are utilized in this paper. Findings: The result demonstrated there are positive effects of process, marketing, and organizational innovations on firm performance in supporting firms. More specifically, the higher the level of innovation activities is, the greater the innovative performance is, which means the larger level of Process, organization and marketing innovation activities are, the higher level of innovative performance are likely to be. Secondly, the higher level of Process, organization and marketing innovative performance, the

  20. Research report of innovation of industrial technology in FY 1996; 1996 nendo sangyo gijutsu no innovation chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Remarkable innovations of the Japanese industry in various fields have been extracted and evaluated during the 50 post-war years. In this report, a method of capturing the innovations of industrial technology is examined. It is essential to clarify the social role of industrial technology, and the original views of this research are indicated by focusing on the innovation process in order to clarify the connections between those of mutual industry, technical management, man-power, and unique Japanese technology. The innovations achieved by the Japanese industry during post-war 50 years are classified into eight categories, i.e., automobiles, iron, aero-space/railways, machines, national land/energy, chemicals/fine ceramics, electronics/information/communication, and life, to clarify the technological progress in each field. In Japan, the industrial technology has been developed with learning from fundamental researches in Europe and the USA. In the future, it is necessary to independently develop industrial frontier. 4 figs., 47 tabs.

  1. Blockchain - an Innovation Technology of the Post-Industrial Economy

    Directory of Open Access Journals (Sweden)

    Arkhireiska Natalia V.

    2017-07-01

    Full Text Available The article is aimed at studying the innovation technology of the post-industrial economy - blockchain. It has been found that blockchain is a multifunctional and multi-level information technology designed to reliably account for different assets. It has been proved that the most important today is blockchain for Bitcoin. The article explores the opportunities, prospects and risks associated with investment in cryptocurrency. It has been determined that the main advantages of investment in Bitcoins are: steadily growing rate, confidence in currency, liquidity, anonymity, decentralization. However, there are significant downsides, such as: scaling problem, uncertainty about the status of the cryptocurrency on the part of the State, and excessive processing time for payments (approximately 10 minutes. It has been proved that the main benefits of Blockchain 1.0 and 2.0 are economic efficiency and cost savings through the use of decentralized network models, which do not require trust in a single transactional center, while Blockchain 3.0 is a freedom that will enable blockchain technology to implement solutions that are not related to monetary turnover and market transactions.

  2. Business cycle and innovation activity in medium-high and high technology industry in Poland

    Directory of Open Access Journals (Sweden)

    Dzikowski Piotr

    2015-12-01

    Full Text Available This article examines differences in an impact of business cycle phases on innovation activity in medium-high and high technology industry in Poland. It is assumed that each business cycle phase influences innovation activity in the same fashion, but its impact varies and it depends on the firm’s innovation activity. The higher innovation activity the less impact of business cycle. The scope of the survey relates to innovation in MHT and HT industry in Poland. The data concerns the innovation at the firm level and the diffusion “new for the company”. Innovation activity is defined by the following activities: (1 expenditure on research and development and investments in fixed assets not used so far such as: abuildings, premises and land; b machinery and equipment, c computer software; (2 implementation of new products and technological processes and (3 innovation cooperation. The methodological part of the analysis includes a logit modeling. The survey includes 1355 companies. Business cycle has a great influence on innovation activity in MTH and HT industry in Poland. The influence of recovery phase is positive whereas both stagnation and recession phases decrease the probability of innovation activity. The character of influence depends on the propensity to take innovation activity. The higher level of innovation activity the enterprises present the less influence of business cycle they get.

  3. The Quadruple Helix Model Enhancing Innovative Performance Of Indonesian Creative Industry

    Directory of Open Access Journals (Sweden)

    Sri Wahyu Lelly Hana Setyanti

    2017-11-01

    Full Text Available The creative industry in Indonesia has contributed positively to the national economic growth. Creative industry grows from the creativity and innovation performance of the business actors. The challenge of creative industry is how to completely understand the creative and innovative processes in business management. Therefore it requires an approach that combines the synergy between academicians entrepreneurs government and society in a quadruple helix model. The objective of this research is to develop a creativity model through a quadruple helix model in improving innovation performance of the creative industry.

  4. Stakes Matter in Ultimatum Games

    DEFF Research Database (Denmark)

    Andersen, Steffen; Ertaç, Seda; Gneezy, Uri

    2011-01-01

    One of the most robust findings in experimental economics is that individuals in one-shot ultimatum games reject unfair offers. Puzzlingly, rejections have been found robust to substantial increases in stakes. By using a novel experimental design that elicits frequent low offers and uses much...... larger stakes than in the literature, we are able to examine stakes' effects over ranges of data that are heretofore unexplored. Our main result is that proportionally equivalent offers are less likely to be rejected with high stakes. In fact, our paper is the first to present evidence that as stakes...

  5. Illegal streaming as disruptive innovation : How the established companies within the television industry deal with potential disruptive innovations

    OpenAIRE

    Myhra, Cecilie Victoria

    2013-01-01

    This thesis was written to examine how the established companies within the television industry in Norway deal with potential disruptive innovations. In this case the disruptive innovation is illegal streaming of sports, series and movies. This is common among the younger population, which is not the incumbents’ main target. In that way, illegal streaming can grow without them knowing it, and in worst case eventually push them out of the market. Especially when the users can “save” 900 NOK on...

  6. Green Lean Six Sigma and Managerial Innovation in Malaysian Automotive Industry

    OpenAIRE

    Farah Izzaida Mohd Zamri; Nurul Fadly Habidin; Siti Norhafizan Hibadullah; Nursyazwani Mohd Fuzi; Auni Fatin Nadia Chiek Desa

    2013-01-01

    The purpose of this paper is to determine the relationship between the Green Lean Six Sigma (GLSS) and the Management Innovation (MI) to be implemented in the Malaysian Automotive Industry. This paper tries to examine how the GLSS can contribute and have a positive impact on the development of MI to achieve better performance in the automotive industry. In addition, by applying the advantages of innovation in an industry, they are able to ensure they have a competitive advantage factor. There...

  7. Leadership styles and managerial culture at industrial enterprises with different modernization and innovation processes

    Directory of Open Access Journals (Sweden)

    Glukhov Sergei

    2017-01-01

    Full Text Available The article presents the results of an empirical research into the transformational leadership and managerial culture at industrial enterprises with different modernization and innovation processes. The authors suggest the criteria for differentiation of options of making changes at the industrial companies: the attitude to their own research base, the focus on introduction of innovations, the investment potential for the introduction of innovations, contacts with research and educational agencies, presence of institutional innovation structures in the structure. It was found out that the managerial profile of an industrial enterprise, focused on innovation activities, involves the index of transformational leadership and the managerial culture with a subject-oriented management, i.e. democratic, which is manifested in the commitment to the group decision making process; humanizing, which is manifested in the attitude towards the employees as being independently valuable regardless the context of achieving organizational results; and innovative, which is manifested in the constant quest for changes.

  8. INNOVATION IN THE EUROPEAN VALUE CHAIN: THE CASE OF THE ROMANIAN AUTOMOTIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Alina Petronela NEGREA

    2015-03-01

    Full Text Available Entrepreneurs’ and regional stakeholder’s capacity to turn knowledge, skills and competencies into sustainable competitive advantage is crucial to a region' economic performance. The article attempts to reveal their synergy by gathering evidence in the particular context of the Romanian automotive industry. Based on primary data collected through structured inter¬views and experiential visits, the research is organized around three investigative themes: (1 entrepreneurs’ approach to and perception on innovation, (2 factors affecting innovation, and (3 networking and knowledge diffusion in the regional productive environment. The findings emphasize the convergent opinion of the regional stakeholders on the vital role innovation plays at the current stage of the industry and the key role entrepreneurs have in stimulating innovation in the regional context. A series of three factors underlay the innovative performance at regional and industry level, namely the presence of an innovation friendly business environment, entrepreneurs’ personality, as well as the external competitive environment.

  9. INVESTIGATION OF MARKETING TECHNOLOGIES IN THE INNOVATION PROCESS OF ROCKET AND SPACE INDUSTRY

    Directory of Open Access Journals (Sweden)

    K. B. Dobrova

    2016-01-01

    Full Text Available In this article we have studied the use of marketing technologies in the innovation process of enterprises of rocket and space industry. The present study specifies the relevance of chosen research topic, as well as the essence of marketing innovations at the enterprises of rocket and space industry, the structuring of marketing and management processes in the innovation process. There are provided the most common analytical instruments in the marketing and there is marked the importance of use of a global strategy for the enterprises of rocket and space industry. The article also specifies a clear example of application of marketing technologies in the innovation process of the Federal State Unitary Enterprise "State Space Research and Production Center named after Khrunichev M.V'.'. At the beginning the role and place of innovation management and innovation process in the strategic management of the FSUE "SSRPC named after Khrunichev M.V." are shown. Then there are described the basic marketing methods of program-oriented management of the innovation process in the FSUE "SSRPC named after Khrunichev M.V"" and there is highlighted the innovation marketing strategy of the FSUE "SSRPC named after Khrunichev M.V.". There are presented the distinctive features of the competitive strategy of the company of the rocket and space industry and the features of formation (development of the innovative enterprise development strategy based on marketing innovation in the FSUE "SSRPC named after Khrunichev M.V.". The conclusion includes the main findings of the study conducted.

  10. Innovation and technology transfer through global value chains: Evidence from China's PV industry

    International Nuclear Information System (INIS)

    Zhang, Fang; Gallagher, Kelly Sims

    2016-01-01

    China's success as a rapid innovation follower in the infant Photovoltaic (PV) industry surprised many observers. This paper explores how China inserted itself into global clean energy innovation systems by examining the case of the solar PV industry. The paper decomposes the global PV industrial value chain, and determines the main factors shaping PV technology transfer and diffusion. Chinese firms first entered PV module manufacturing through technology acquisition, and then gradually built their global competitiveness by utilizing a vertical integration strategy within segments of the industry as well as the broader PV value chain. The main drivers for PV technology transfer from the global innovation system to China are global market formation policy, international mobilization of talent, the flexibility of manufacturing in China, and belated policy incentives from China's government. The development trajectory of the PV industry in China indicates that innovation in cleaner energy technologies can occur through both global and national innovation processes, and knowledge exchange along the global PV value chain. - Highlights: •The value chain analytical approach is synergized with the theories of technology transfer and innovation systems. •A detailed review of how China integrated itself into the global solar PV innovation system is provided. •Four main factors shape PV technology transfer to China across various value chain segments. •Innovation in cleaner energy technologies is a combination of global and national innovation processes.

  11. "We are Always After that Balance" - Managing Innovation in the New Digital Media Industry

    Directory of Open Access Journals (Sweden)

    Sabine Hotho

    2010-11-01

    Full Text Available The pressure to innovate is growing as technology cycles change more rapidly. Organisations need to balance exploration and exploitation effectively if they are to heed the innovation imperative. Organisational ambidexterity is proposed as a means to achieve such balance with structural or contextual ambidexterity as possible choices. Yet how organisations become ambidextrous is an as yet underresearched area, and different industry sectors may pose different innovation challenges. Using the case study method, this paper examines how a computer games company responds to an industry-specific innovation challenge and how it endeavours to balance exploration and exploitation. The findings suggest that ambidexterity is difficult to achieve, and is fraught with organisational tensions which might eventually jeopardise the innovation potential of a company. The paper suggests that more qualitative research is needed to further our understanding of innovation challenges, innovation management and organisational ambidexterity.

  12. Design Driven Innovation Practices in Design-preneur led Creative Industry

    Directory of Open Access Journals (Sweden)

    Philips Kembaren

    2014-09-01

    Full Text Available Design driven innovation has emerged to be an alternative way to generate sustainable competitive products or services. Previous research has recently revealed succesful practices of design driven innovation in various industries. However, little has been known about the creative companies that practice design driven innovation, especially in developing countries. This research investigates the existence and practices of design-driven innovation in the Indonesian creative industry. Based on interviews with the design-preneurs of the creative industry, one of the results of this study reveals how the Indonesian creative industry creates new meanings that are embedded into new products. Based on the identification, a framework to create new meaningsis resulted which consists of a set of key processes, such as sensing, sensemaking, specifying, setting up and storytelling. The practical contribution of this research is that this identified framework can be adopted by any creative companies interested in improving their innovation capability.

  13. Innovation in small and medium sized enterprises (SMEs) in the Malaysian information technology (IT) industry

    International Nuclear Information System (INIS)

    Fatimah Mohd Amin

    2001-01-01

    The aim of this study is to examine innovative activities in small and medium enterprises (SMEs) in the Malaysian information technology (IT) industry. This study addresses three research questions: 1. What is the innovation pattern among SMEs in the Malaysian IT industry? 2. How significant is interactive learning between SMEs in the Malaysian IT industry and other agents in the innovation system? and 3. What is the role of the government in promoting innovation among SMEs in the Malaysian IT industry? Two approaches were taken to collect data for this study, that is, mail survey and face-to-face interviews. Based on findings from this study, the SMEs in the Malaysian IT industry were divided into four categories, namely, highly innovative, innovative, inventive, and non innovative. The patterns of knowledge acquisition and interactive learning vary among the different categories of firms, and on the whole, vertical linkages with suppliers were found to be the most significant. Finally, support through the provision of funding was considered to be among the most important roles of the government in promoting innovation in SMEs in the Malaysian IT industry. (author)

  14. Sustaining Innovative Success: A Case Study on Consumer-Centric Innovation in the ICT Industry

    Directory of Open Access Journals (Sweden)

    Minkyung Choy

    2016-09-01

    Full Text Available The phenomenon of innovation growing rapidly and having a shorter lifespan is a structural change due to the development of ICT (Information and Communications Technology, diverse investment methods, and reduced pattern of innovation adoption. For ICT companies to survive and maintain their success in this ever-changing environment, they need to succeed in fulfilling both productivity and accuracy of innovation. To sustain their innovative success, ICT companies should consistently maintain the direction of innovation towards consumers. The present study analyzes various cases of ICT companies which succeeded or failed to maintain their prior innovative success, and suggests consumer-centric innovation as a solution. To create consumer-centric innovations, companies have to (1 predict the dynamically evolving demand of consumers and continuously transform; (2 proactively employ observation method and big data analysis to discover hidden demands; and (3 identify hassles such as wastes, inconveniences, and anxieties, and put effort in solving these hassles.

  15. Design Driven Innovation as a Differentiation Strategy - in the Context of Automotive Industry

    Directory of Open Access Journals (Sweden)

    Mosarrat Farhana

    2015-07-01

    Full Text Available Though, in the automotive industry, technology is considered as a source of innovation and development, emerging change in consumer perception has brought industry focus on design. Evolution of this industry is closely related to the convergence of technology and design. In such context, implication of design driven innovation strategy in the automotive industry has potential to be explored and to create sustained competitive advantage through balancing customers’ need, technological opportunities and product meaning. The aim of this paper is to give a holistic view of design driven innovation as a differentiation strategy in the automotive industry and its implication for strategic management through some relevant research reviews and empirical information. On the contrary, this research lacks detailed description on industry practice to provide greater breadth, since it attempts to correlate the strategic concept of design with the dynamic capability of a firm in that particular industry.

  16. RWE sells Nafta stake

    International Nuclear Information System (INIS)

    Janoska, J.

    2004-01-01

    At year-end 2000, state-owned Slovensky plynarensky priemysel (SPP) signed a Memorandum of Understanding that set the conditions for the German concern RWE to purchase a 40 % stake in Nafta Gbely. This partnership agreement was meant to grant RWE participation in the management of the gas storage operator, which is controlled by SPP, and allow RWE to increase the use of Nafta's capacities. But in the 3 years since then, these objectives were not met. RWE representatives were not appointed to the Nafta Board and not a single cubic meter of RWE gas was stored at Nafta. RWE denied that it was considering leaving Nafta. Control of Nafta and SPP gradually passed to RWE's major competitors. The attitude of RWE only changed last week, when it sold its stake in Nafta to Ruhrgas under favourable conditions. Although Ruhrgas already more or less controlled Nafta via SPP, it paid RWE 62.22 million Eur for its stake. This represents a price per share of about 12.44 Eur more than RWE paid over two years ago and about double the market price. One of the possible reasons why RWE decided to leave the company is, apart from uncertainty surrounding future participation in the company management, uncertainty regarding whether there is a profit to be made on future dividends. Another reason may be the joint operation of both rivals in a number of companies. And so the Nafta trade may be part of the establishment of areas of influence

  17. Innovative Activity in the Industry of Ukraine: Problems, Risks, Activization Directions

    Directory of Open Access Journals (Sweden)

    Pidorycheva, I.

    2014-09-01

    Full Text Available The general characteristic of a condition of innovative activity of the industrial enterprises in Ukraine and positive tendencies of the last years in this plane are shined. The key problems and demotivating factors of increase of interest of the industry in innovations are analyzed. Risks of preservation of available tendencies in the sphere of innovative and technological development of the industry, which can lead to preservation of outdated structure of national production are defined. Priorities and medium-term measures for overcoming of available restrictions in realization of new model of economic development, at the heart of which — investments into the innovative activity, new industrialization and industrial updating of the country are offered.

  18. Software engineering technology innovation: Turning research results into industrial success

    NARCIS (Netherlands)

    Punter, H.T.; Krikhaar, R.L.; Bril, R.J.

    2009-01-01

    This paper deals with the innovation of software engineering technologies. These technologies are methods and tools for conducting software development and maintenance. We consider innovation as a process consisting of two phases, being technology creation and technology transfer. In this paper, we

  19. Project management and management of innovation in small industrial firms

    NARCIS (Netherlands)

    During, W.E.

    1986-01-01

    In innovation projects, three sub-processes have to evolue concurrently. These are problem solving, to bring about a new product or process; internal innovation diffusion, to disseminate information and engender a positive attitude towards new developments; and change in the organization so that it

  20. Unraveling the Role of Public Researcher Mobility for Industrial Innovation

    DEFF Research Database (Denmark)

    Kongsted, Hans Christian; Kaiser, Ulrich; Ejsing, Ann-Kathrine

    We estimate the relative contribution of mobile scientists who leave academia for the private sector on the subsequent innovative performance of the firms they join. We use data on the population of Danish firms and their R&D workers for the period 1999-2004 and measure innovation performance...

  1. Software engineering technology innovation - Turning research results into industrial success

    NARCIS (Netherlands)

    Punter, T.; Krikhaar, R.L.; Bril, R.J.

    2009-01-01

    This paper deals with the innovation of software engineering technologies. These technologies are methods and tools for conducting software development and maintenance. We consider innovation as a process consisting of two phases, being technology creation and technology transfer. In this paper, we

  2. Focussing Innovation Strategy for Sustainability in Chemical Industry

    NARCIS (Netherlands)

    John J. Hageman; Dr. ir. Jan Venselaar

    2006-01-01

    Innovation in a company is as essential for sustainable development as it is for continuing profitability. Much knowledge is available to innovate processes, products and activities. More is still being generated. However use of that knowledge is lagging behind and much is not used at all. There are

  3. THE PROBLEMS OF DEVELOPMENT OF INDUSTRIAL ENTERPRISES’ INNOVATIVE POTENTIAL

    Directory of Open Access Journals (Sweden)

    Alla Vasilevna Cherep

    2013-11-01

    Full Text Available In spite of the fact that works of many scientists are dedicated to researches of innovative strategies’ essence and issues of their formation, there has been no unanimous opinion on determination of the innovative strategy concept up to now. Some authors consider that “an innovative strategy is a plan, in the sense that it covers the entire length of a process, from researches, through production and sales to use, with basic points of "interference" and control being marked, rates of increase in a technological level and methods of finding intellectual labour products necessary for this purpose being determined”. Others understand the definition of an innovative strategy as "timely concentration of management efforts on mastering and using prospective accomplishments of scientific and technical development and timely supply of innovations dynamics with resources" [1, p. 112].DOI: http://dx.doi.org/10.12731/2218-7405-2013-7-54

  4. Innovation dynamics of Salvadoran agri-food industry from an evolutionary perspective

    Energy Technology Data Exchange (ETDEWEB)

    Peraza Castaneda, E.H.; Aleixandre Mendizábal, G.

    2016-07-01

    This paper presents a holistic approach to analyse the dynamics of innovation of a low-tech sector in a less developed economy, the agri-food industry in El Salvador, in the context of evolutionary economy. This requires using complementary quantitative and qualitative data and methodologies to better understand how Salvadoran agri-food industry innovation system works and how STI public policies can improve the performance of a key sector in terms of national socioeconomic development. The work already done shows a concentrated and vigorous sector with some upstream and downstream connections that innovate depending on firm size, age, R&D activities and use of industrial property rights. (Author)

  5. Public funding of innovation R and D y cooperation and membership in printing industry

    International Nuclear Information System (INIS)

    Guisado Tato, M.; Vila, M.; Guisado Gonzalez, M.

    2010-01-01

    This paper contrasts how business cooperation at the level of R and D, the size and the membership in printing industry determine the participation of innovative manufacturing companies in the systems of public support for innovation. Material and methods. From the microdata of the survey on technological innovation 1998-2000, of the National Institute of Statistics (INE), a database is created by the manufacturing Spanish companies involved in innovation. Afterwards, by univariate and multivariate statistical methods, we contrast whether cooperation, size and membership in printing industry determine the participation of the manufacturing innovative companies in the systems of public support for innovation, as well as the direction of that conditioning. Results. The tests carried out indicate that more cooperation between companies at the level of a larger size have a positive influence on the degree of business involvement in the systems of public support for innovation.Discussion. Public administrations seek to foster the development of innovation among manufacturing companies facilitating by providing funds to the companies that cooperate in the area of I and D. Likewise, public support for innovation are targeting in larger firms, while the companies, belonging to the printing industry have less likely to obtain public funding for their innovative projects that the remaining companies of the Spanish manufacturing sector. (Author).

  6. Responsible Innovation: A Complementary View from Industry with Proposals for Bridging Different Perspectives

    Directory of Open Access Journals (Sweden)

    Marc Dreyer

    2017-09-01

    Full Text Available This paper presents a consensus view on Responsible Innovation by a group of industry practitioners, each with high level management experience in driving innovation from within industrial companies operating in different sectors. The authors argue that, while a substantial body of academic research on Responsible Research & Innovation (RRI of potential interest now exists, it is failing to have impact in the industrial community, where it is understood to be partially targeted, because many of the concepts, tools and methodologies are not aligned with current industrial practices. This is leading to a misconception as to where industry stands on topics addressed by RRI and difficulties in forwarding a dialogue that is meaningful to both parties. The need to distinguish between processes relating to research and innovation is argued, together with the view that research into RRI should encompass more of the on-going work being carried out in related fields such as the role of companies in society, the debate around Corporate Social Responsibility (CSR and Corporate Shared Value (CSV, responsible digital innovation, the elements of ethical leadership, sustainable investment policies and work on establishing social impact factors as well as public concerns on innovation. Directions for an alignment of the terminology and concepts are also proposed. This paper is to be viewed as an attempt at bridging perspectives with the aim of finding common ground to develop the field of RRI further so that it provides effective concepts, tools and methodologies to guide industrial innovation towards better societal outcomes.

  7. What Finance Can Learn from Biopharma Industry: A Transfer of Innovation Models

    Directory of Open Access Journals (Sweden)

    Francesco COREA

    2015-12-01

    Full Text Available The financial sector is living a profound crisis in order to keep pace with the continuous technological breakthroughs that come out daily, while other sectors seem to be historically more growth-by-innovation-based (e.g., the pharma/biotech sector. This work focuses on an interdisciplinary approach to innovation, and on insights that the banking sector can draw from the pharmaceutical one. Hence, a unique dataset has been built, and it collects information on the most relevant players for both the fields. Different indicators have been created as well in order to empirically test whether the financial industry is actually less innovative with respect to the pharmaceutical one, and to understand the best growing strategy for the banking industry. The results confirm that there is an innovation gap between the two industries, as well as identify the corporate venture capital as the best mean to drive business growth through innovation.

  8. Assesment of Innovation Process Capability-Based on Innovation Value Chain Model in East Java Footwear Industry

    Directory of Open Access Journals (Sweden)

    Benny Lianto

    2015-12-01

    Full Text Available This study attempts to assess the innovation process based on  innovation value chain model in footwear industry in East Java, Indonesia. A strength and weakness mapping analysis was performed and it included three factors related to company characteristics: operation scale based on number of employees, operational priod, and market orientation. The samples were 62 footwear industries, members of East Java  Indonesian Footwear Association (Aprisindo. The questionnaire was sent via email. Thirty industries (48.38% sent the questionnaire back. A focus group discussion (FGD was conducted with several representatives from footwear industry before the questionnaire was sent.  The study found that companies are relatively good at idea conversion (42,30%  but the companies have  a little difficulties at diffusion (50,80% and  at idea generation (55,80%. From the result respose show (see table.2 that the weakest links (the innovation process bottleneck is cross-pollination activity [in which the people typically don't collaborate on projects across units, businesses, or subsidiaries (88,6%],  while the strongest links is selection activity [the companies have a risk- averse attitude toward  investing in novel ideas (39,3%]. Based on p-value, the study found that company characteristics influencing a certain phase of innovation value chain significantly were company period (age of company and market orientation. Specifically, both of them influenced idea generation phase.

  9. Green innovation in the Nordic electricity industry: patterns and perspectives

    International Nuclear Information System (INIS)

    Koefoed, Anne Louise; Midttun, Atle

    2001-01-01

    The Nordic countries have been among the leading countries with respect to developing environmentally friendly energy systems and have obtained remarkable results by developing new renewable, effective energy technologies. The article discusses this development and stresses the importance of a broad understanding of the concept of innovation system that includes such elements as sectoral policy, institutions and regulation regimes, but which at the same time retains a functional focus on innovation. The case studies that this article builds upon, show how ''green'' innovation in the Nordic energy systems take place both in commercial and political initialisation- and selection environments. The author thus argues in favour of a functional diffusion of innovation policy into sectoral policy and sectoral economical processes

  10. Federal Strategies for Inducing Technological Innovation in the Auto Industry

    Science.gov (United States)

    1978-03-01

    The present document is intended to provide background information on the innovation process and the spectrum of alternative Federal strate??ies for achieving National automotive goals in the areas of safety, fuel economy and emissions. A narrative...

  11. Experimental Design Strategy As Part of an Innovative Construction Industry

    NARCIS (Netherlands)

    Rogier Laterveer

    2013-01-01

    This exploratory and conceptual article sets out to research what arguments and possibilities for experimentation in construction exists and if experimentation can contribute towards more innovative construction as a whole. Traditional, -western- construction is very conservative and regional, often

  12. Innovation and technological development of industrial regions in the conditions of socioeconomic insecurity

    Directory of Open Access Journals (Sweden)

    Irina Markovna Golova

    2015-03-01

    Full Text Available The article is devoted to the identification of the characteristics and priorities of innovation and technological development in the industrial regions of the Russian Federation in the context of the ongoing global crisis. The authors come from the hypothesis that, in these circumstances, the strategy of innovative development of industrial regions, in order to ensure their sustainability and the creation of conditions for further growth, should be an integral part of their industrial policies and focus primarily on the modernization and improvement of technical and technological level of basic units. On the basis of the analysis of statistical data about the status of the innovation capacity in the Russian Federation, the authors have identified the root causes of the continuing backlog of advanced foreign countries by the level of innovative development (raw-material orientation of the Russian economy that enhances the technological dependence of the developed countries; insufficient financial support for innovation activities by the state; the orientation of innovation in imitation and borrowing. The necessity to take into account in the development and implementation of the socio-economic strategic regions of the Russian Federation and the close relationship between the industrial-technological and innovation component of social development is proved. In order to improve the effectiveness of regional development policies, the classification of Russian regions considering their industrial and technological specialization is proposed, the required elements and characteristics of effective innovation systems for each type of region are allocated. In the article, the proposals on measures of the state support for innovation development of industrial regions, with the aim of improving their sustainability and competitiveness in the face of geopolitical and economic uncertainty are determined. The article is addressed to professionals in the

  13. Merger and Innovation Incentives in a Differentiated Industry

    OpenAIRE

    Kesavayuth, Dusanee; Lee, Sang-Ho; Zikos, Vasileios

    2017-01-01

    In this paper, we consider a duopoly with product differentiation and examine the interaction between merger and innovation incentives. The analysis reveals that a merger tends to discourage innovation, unless the investment cost is sufficiently low. This result holds whether or not side payments between firms are allowed. When side payments are permitted, a bilateral merger-to-monopoly is always profitable, a standard result in the literature. When side payments are not permitted, however, w...

  14. Innovation activity in the hotel industry: evidence from Balearic Islands

    OpenAIRE

    Martínez Ros, Ester; Orfila Sintes, Francina; Crespí Cladera, Rafel

    2005-01-01

    The paper provides empirical evidence on technological activity in the Spanish service sector, in particular for the tourist accommodation in the Balearics. The study wants to fulfil the lack of analyses in the field of tourism. Commonly, the study of innovation activity has been carried out from a manufacture perspective, for that reason the paper discusses the precise definition of innovation in accommodation services. The data refer to a large representative sample of hotels in Balearic Is...

  15. Service Innovation: in Highly Competitive of Hotel Industry

    OpenAIRE

    Hartono, Widjaja

    2013-01-01

    Service innovation is a new or significantly improved service concept that is taken into practice. It can be for example a new customer interaction channel, a distribution system or a technological concept or a combination of them. A service innovation always includes replicable elements that can be identified and systematically reproduced in other cases or environments. The replicable element can be the service outcome or the service process as such or a part of them.(Finland, 2009)Being dev...

  16. Innovation Best Practices in the Medical Device Industry.

    Science.gov (United States)

    Ray, Partha P; Amaral, Joseph F; Hinoul, Piet

    2017-06-01

    Advances in patient care often germinate from keen clinical insights and a needs-based approach to innovation. Although there is an important role for incremental improvements to existing solutions, transformational innovation is what truly drives real shifts in clinical outcomes and subsequently patient satisfaction, market access, and economic value. A good example of this is the evolution of the coronary stent market. The best innovation programs are focused on unmet needs rather than solutions, call for a careful articulation of the specific problems to be solved, involve a deep dive within a clinical area, and seek to prioritize research and development investments into areas where the greatest impact can be expected. To enhance its ability to pursue breakthrough innovation, Johnson and Johnson (J&J) has organized itself along priority disease areas, created the global J&J Innovation organization to pursue external technology and know-how, and continues to partner closely with clinical practitioners. The process undertaken at J&J to acquire a microwave ablation technology and enter the interventional oncology space is a recent case study of these innovation principles and organizational focus in action. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Float glass innovation in the flat glass industry

    CERN Document Server

    Uusitalo, Olavi

    2014-01-01

    A thorough industry analysis is of utmost importance for a study on the impact of technological changes on industry structure. This book evaluates the consequences of a vaguely chosen level of an industry analysis. Too broad a definition of the industry may disaggregate sub-industries, processing industries and international aspects. This is illustrated by revisiting an industry study upon which the dominant design model was based. Readers will see and understand the consequences of too broadly defined industries together with quantitative research approach can have. The book argues that the nature of the industry should define the level of the analysis. This is done by revisiting the flat glass industry study, on which Anderson and Tushman’s (1990) dominant design model is partly based. In their study Anderson and Tushman defined the flat glass industry based on four-digit SIC codes. It is argued that this definition was too broad and it disaggregated important sub-industries, processing industries and int...

  18. Responsible Research and Innovation in industry-challenges, insights and perspectives

    DEFF Research Database (Denmark)

    Martinuzzi, André; Blok, Vincent; Brem, Alexander

    2018-01-01

    empirical and conceptual contributions that explore corporate motivations to adopt RRI, the state of implementation of concrete RRI practices, the role of stakeholders in responsible innovation processes, as well as drivers and barriers to the further diffusion of RRI in industry. Overall......The responsibility of industry towards society and the environment is a much discussed topic, both in academia and in business. Responsible Research and Innovation (RRI) has recently emerged as a new concept with the potential to advance this discourse in light of two major challenges industry...... is facing today. The first relates to the accelerating race to innovate in order to stay competitive in a rapidly changing world. The second concerns the need to maintain public trust in industry through innovations that generate social value in addition to economic returns. This Special Issue provides...

  19. THE INFLUENCE OF INNOVATIONS SUSTAINABLE IN DECISION PURCHASE OF INDUSTRIES THIRD GENERATION PETROCHEMICAL

    Directory of Open Access Journals (Sweden)

    Luciana Madureira Domingues

    2016-08-01

    Full Text Available This article aims to understand how sustainable innovation influences the decision of industrial purchases. Much has been said about the organizational buying behavior, but little is said about how the industrial buyers consider sustainable innovation in their purchasing procedures. This work aims to contribute to the constructs involving this type of purchase behavior. Therefore, a qualitative survey was conducted with non-probabilistic sample , composed of six companies of different sizes , which make up the chain of the petrochemical industry , more specifically , the third generation of this chain . Data were collected via semi-structured interview guide, and studied by means of categorization by content analysis. The analysis revealed that sustainable innovations not influence the purchasing decisions of the petrochemical industry , since the companies surveyed are strongly linked to criteria such as price , time and quality and do not realize sustainable innovation as an important factor in purchasing decisions .

  20. Sequential method for the assessment of innovations in computer assisted industrial processes

    International Nuclear Information System (INIS)

    Suarez Antola R.

    1995-01-01

    A sequential method for the assessment of innovations in industrial processes is proposed, using suitable combinations of mathematical modelling and numerical simulation of dynamics. Some advantages and limitations of the proposed method are discussed. tabs

  1. Green growth: innovative capacity of sme's in the Dutch Greenhouse Horticulture Industry

    NARCIS (Netherlands)

    dr. MBA S.J.M. (Saskia) Harkema; H.J. (Henk) Schout

    2011-01-01

    The Dutch greenhouse horticultural industry is characterized by world leadership in high-tech innovation. The dynamics of this playing field are innovation in production systems and automation, reduction in energy consumption and sharing limited space. However, international competitive advantage of

  2. Green networks: innovative capacity of sme's in the Dutch Greenhouse Horticulture Industry

    NARCIS (Netherlands)

    H.J. (Henk) Schout; dr. MBA S.J.M. (Saskia) Harkema

    2011-01-01

    The Dutch greenhouse horticulture industry is characterized by world leadership in high-tech innovation. The dynamics of this playing field are innovation in production systems and automation, reduction in energy consumption and sharing limited space. However, international competitive advantage of

  3. From EcoDesign to Industrial Metabolism: Redefinition of Sustainable Innovation and Competitive Sustainability

    DEFF Research Database (Denmark)

    Taps, Stig B.; Brunø, Thomas Ditlev; Nielsen, Kjeld

    2013-01-01

    evaluation of the most commonly tools and techniques in use and suggests a redefinition of the concept of EcoDesign by integrating End-of-Life activities to gain industrial metabolism. This approach takes a broader innovation perspective, necessary to construct a sustainable innovation community...

  4. Research on the Mode of Technology Innovation Alliance of the New Material Industry in Hunan Province

    Science.gov (United States)

    Wang, Fan

    2018-03-01

    One of the main directions of technology development in the 21st century is the development and application of new materials, and the key to the development of the new material industry lies in the industrial technology innovation. The gross scale of the new material industry in Hunan Province ranks the first array in China. Based on the present situation of Hunan’s new material industry, three modes of technology innovation alliance are put forward in this paper, namely the government-driven mode, the research-driven and the market-oriented mode. The government-driven mode is applicable to the major technology innovation fields with uncertain market prospect, high risk of innovation and government’s direct or indirect intervention;the research-driven mode is applicable to the key technology innovation fields with a high technology content; and the market-oriented mode is applicable to the general innovation fields in which enterprises have demands for technology innovation but such innovation must be achieved via cooperative research and development.

  5. Innovation in natural resources : New opportunities and new challenges. The case of the Argentinean seed industry

    NARCIS (Netherlands)

    Marin, A.; Stubrin, L.I.

    2015-01-01

    In this paper, using the case of seeds, we explore the existence of both new opportunities and new challenges for innovation in Natural Resource Based Industries (NRBIs) in developing countries. Conventional views construe NRBIs as low tech, with low technological dynamism, little innovation, and

  6. University-Industry Cooperation and the Transition to Innovation Ecosystems in Japan

    Science.gov (United States)

    Ranga, Marina; Mroczkowski, Tomasz; Araiso, Tsunehisa

    2017-01-01

    This article looks at the evolution of university-industry collaboration (UIC) policies in Japan since the mid-1990s to the present and analyses their role in shaping the country's innovation ecosystem. UIC policies are examined within a multidimensional innovation policy framework that encompasses five Science and Technology Basic Plans and a…

  7. Scenarios for transition towards a low-carbon world in 2050: what's at stake for heavy industries? Joint Research Project 'Carbon-constrained scenarios'. Results and final report

    International Nuclear Information System (INIS)

    2008-11-01

    The EpE-IDDRI study, Launched in 2004, explores how major industrial sectors will be impacted by a carbon constraint stabilizing atmospheric CO 2 concentration at 450 ppm. By means of an innovative hybrid modelling platform and ongoing dialogue between researchers and industrials, the study produces conclusions concerning both general climate policy as well as the economic response of industrial sectors- specifically of the steel, aluminium, cement, and sheet glass sectors, as well as of the energy sector

  8. Industry Differentiation in the Innovation-Exporting Business Models of SMEs

    DEFF Research Database (Denmark)

    Child, John; Hsieh, Linda; Elbanna, Said

    . This paper addresses these two research gaps by investigating whether there is a systematic variation in the specifics of the innovation-exporting business models adopted by SMEs according to their industry membership. The sample of 180 firms includes an equal number of SMEs actively engaged in exporting...... and located in the clothing, software and biotechnology industries across six economies. The results indicate that SMEs in each industry follow distinctive business models with respect to innovation and exporting. It is concluded that industry is an institutionalized socio-technical system of considerable...

  9. Research on Technology Innovation of China's NEV Industry Based on Patent Analysis

    DEFF Research Database (Denmark)

    Wang, Jingyu; Liu, Yingqi; Kokko, Ari

    2016-01-01

    Purpose/Significance: The development of Chinas new energy vehicle(NEV) industry is concerned by both the government and enterprises. Method/Process: Based on the patent data, this paper conducts a deep analysis on the technology innovation of Chinas NEV industry from three perspectives- the year...... distribution of the patent, the distribution of the patent applicants and the distribution of patent technology area. Then, the paper makes further correlation analysis on the NEV industry chain and the patent data. Result/Conclusion: In general,the paper comprehensively reflects the whole picture of Chinas...... NEV industry technology innovation and gives some ideas for its further development....

  10. Change in the game : business model innovation in the video game industry across time

    OpenAIRE

    Locke, Austin; Uhrínová, Bianka

    2017-01-01

    Technological innovation has changed business models across multiple industries – retail (Amazon), taxi (Uber), hotel (Airbnb). Through exploratory research, using secondary data, this thesis describes changes that have occurred in video gaming industry from its creation to the current, modern era that are connected to technological innovation. Based on the current research of business models, the authors created a “Value Creation-Revenue Stream Framework” that they use to anal...

  11. Trends and new business models in the portuguese fashion industry: a strategic innovation perspective

    OpenAIRE

    Queirós, David; Afonso, Paulo; Vieira, Filipa Dionísio

    2013-01-01

    This research project focuses on the discussion of trends and new business models for the textile and clothing industry in general and for the fashion industry, in particular, using tools and an approach supported on strategic innovation. A documentary analysis was performed and they were conducted a series of semi-structured interviews. It was noted the importance of the strategic analysis and particularly strategic innovation for the design of new successful business models. Main findings a...

  12. Innovation Opportunities: An Overview of Standards and Platforms in the Video Game Industry

    OpenAIRE

    Laakso, Mikael; Nyman, Linus Morten

    2014-01-01

    The video game industry offers insights into the significance of standards and platforms. Furthermore, it shows examples of how new entrants can offer innovative services, while reducing their own risk, through bridging the boundaries between standards. Through an exploration of both past and present, this article aims to serve as a primer for understanding, firstly, the technological standards and platforms of the video game industry, and secondly, the recent innovations within the video gam...

  13. Use of innovative control systems in maintenance of a sustainable development of the industrial enterprise

    Directory of Open Access Journals (Sweden)

    2013-10-01

    Full Text Available Instability of the economic environment causes of increase of adaptive characteristics of the enterprise that leads to introduction of the advanced innovative control systems. Innovative management assumes accumulation of the newest tools of the operation of business applied in world practice. The problem of the manager in this case consists in formation of such industrial system which will provide a sustainable development of the industrial enterprise in the long-term period.

  14. Learning Networks in Innovation Systems at Sector / Regional Level in Argentina: Winery and Dairy Industries

    OpenAIRE

    Guillermo Sanchez; Roberto Bisang

    2011-01-01

    This work studies how the set of relationships that gives place to the learning processes is established in the food indus- try in Argentina. A theoretical ad hoc approach is adopted, conjugating the concepts of innovation systems at sector / regional level with some context considerations like the innovative behaviour of the global and local food industry and a description of the public and private S&T in Argentina. The study is focused in two cases: the wine industry, at the Mendoza provinc...

  15. BUSINESS MODEL IN THE HOSPITALITY INDUSTRY, FROM TRADITIONAL TO OPEN INNOVATION

    Directory of Open Access Journals (Sweden)

    Mihaela DIACONU

    2017-07-01

    Full Text Available The paper highlights the importance of information and communication technology in valorising the behavior of the tourism consumer by including it in new business models.The business model is considered a form of innovation to gain value for all stakeholders in the hospitality industry. On the basis of the very rich specialty literature, the paper presents the particularities of the model of hospitality industry, both the traditional model and the innovative business model.

  16. Perceptions of industrial and nuclear risks. Stakes, negotiations and social development of levels of risk acceptance; Perceptions des risques industriels et nucleaires: enjeux, negociations et construction sociale des seuils d'acception des risques

    Energy Technology Data Exchange (ETDEWEB)

    Bernier, S.Ch

    2007-11-15

    In this thesis we will question the perceptions of industrial risks in the occidental world at the beginning of the 21. century. For this purpose we will try to understand how concepts such as sustainable development, precautionary principle, liability, or even zero-risk bias have progressively developed around a thought model based on the scientific rationality. This model is now undermined by its incapacity to fully address the issues it raises and completely avoid the potential risks. However, despite consistent weaknesses, it remains a reference value moulded by past accidents which have led to the making of laws aiming mainly at defining liability and protecting those who are held liable. Thus, public information becomes a requirement for democracy and the protection of this thought model. In this context, the protagonists at stake are security-conscious, economical and political lobbies that constantly redefine the limits of risk acceptance. We come to the realization that our lifestyle and value system remain unchallenged even though undergoing a crisis. The specificity of this research lies into the importance we give to the local approach, dealing with registered Seveso sites and nuclear plants located in Indre et Loire. We have polled five categories of respondents through interviews or questionnaires in order to understand their opinion regarding situations involving technological risks. The result of this survey helps us understand and set the levels of risk acceptance that they define with regard to the industrial risks and show the complexity of a situation involving political stakes, environmental pressures, a profit-driven economy and security constraints, in a vague and complex context. This work gives us a contrasted picture of today's perceptions of risks. (author)

  17. Innovation Barriers and Enablers that Affect Productivity in Uganda Building Industry

    Directory of Open Access Journals (Sweden)

    Henry Mwanaki Alinaitwe, , and

    2007-06-01

    Full Text Available The construction industry has of recent been blamed for lack of innovation. Lack of innovation in the industry is believed to be responsible for the decreasing or stagnant levels of productivity in comparison with other industries. This paper reviews the major barriers and enablers to innovation in general. Propositions were made about the factors that affect innovation in the construction industry which were then formulated into a questionnaire. A survey was made on building contractors in Uganda, a developing country, targeting those with financial strength, large in size, and with high capacity to carry out big projects. The identified factors were then ranked and correlated. The level of training in science, engineering and technical education, and the level of research and development at the industry level are looked at as the greatest innovation enablers in building that will drive forward labour productivity. The size of the domestic market and the level of security are the worst innovation barriers that lead to low productivity in the building industry in Uganda. Contractors, policy makers and the government should address the identified factors in order to improve productivity.

  18. Recording and Audit of Resource Saving Innovations at Modern Industrial Companies

    Directory of Open Access Journals (Sweden)

    I. M.

    2017-05-01

    Full Text Available Resource saving and energy saving are essential components of “energy security” problem in all the countries, which raises the importance of analysis and revision of approaches to organization of recording and audit of resource saving innovations at industrial companies. The article’s objective is to study organization of recording and audit of resource saving technologies at industrial companies. A review of resource saving purposes and methods is given. For accounting purposes, innovations in resource saving are recorded now as intangible assets. Recording of resource saving innovations and technologies at industrial companies is confined to recording of transactions on creation or acquisition of patent rights objects and intellectual property objects. The author’s approach to organization of audit by the conformity of resource saving innovations with M. Porter’s test is proposed. Data showing success story of a Ukrainian company manufacturing polyurethane foam sealant PENADO in the aerosol dispenser is used to confirm that Ukraine does have potentials to introduce and utilize resource saving technologies, including energy saving ones. The proposed model for recording and audit of resource saving innovations should be used in strategic planning of resource saving innovations at the companies incorporated in industrial groups or holdings. Using this model, a company can reveal and assess the mismatch between amounts of resources that can be allocated in innovation and real capacities for introducing innovative resource saving technologies, and factors having the strongest impact on recourse saving innovations at companies incorporated in one financial and industrial group or holding. The proposed model accounts for the specific operative conditions in holdings and tough conditions for business operation of industrial companies in Ukraine.

  19. Innovation subject to sustainability: the European policy on biofuels and its effects on innovation in the Brazilian bioethanol industry

    Directory of Open Access Journals (Sweden)

    Henrique Pacini

    2012-08-01

    Full Text Available Biofuels are a suitable complement for fossil energy in the transport sector and bioethanol is the main biofuel traded worldwide. Based on the assumption that innovation can be influenced by regulation, the Brazilian bioethanol industry is facing new requirements from external actors while reaching for international markets. Until 2010, national environmental laws were the main sustainability instrument that the biofuel industry faced. With the introduction of sustainability criteria for biofuels in the European Fuels Quality Directive (FQD and Renewable Energy Directive (RED of 2009, bioethanol producers have been pressured to innovate in respect of the requirements of future markets. Here, the aim is to analyse the case of Brazil, given the potential exports of sugarcane-based ethanol from this country to the EU. Brazil provides an interesting overview of how a bioethanol industry innovated while facing sustainability requirements in the past. A comparison between the European requirements and the industry´s status quo is then explored. The EU criteria are likely to have effects on the Brazilian bioethanol industry and incremental improvements in sustainability levels might take place based on the sustainability requirements. In addition, the industry could follow two other paths, namely risk diversification by engaging in multi-output models; and market leakage towards less-regulated markets. At the same time, an environmental overregulation of the biofuel market may make it more difficult for emerging biofuel industries in other countries, especially in Africa, by creating a barrier rather than contributing to its expansion. The results of this analysis show the main challenges to be addressed and the potential positive and negative impacts of the European Union biofuels policy on the Brazilian bioethanol industry.

  20. Managing interactions between technological and stylistic innovation in the media industries, insights from the introduction of ebook technology in the publishing industry

    NARCIS (Netherlands)

    T.S. Schweizer (Sophie)

    2002-01-01

    textabstractThe mainstream of innovation research pays a lot of attention to technological innovation, but has neglected its interaction with another type of innovation, which is particularly important in sectors like the furniture, fashion and the media content industries: stylistic innovation.

  1. Innovation, Integration and Product Proliferation - Empirical Evidence for the Agri-Food Industry

    OpenAIRE

    Karantininis, Kostas; Sauer, Johannes; Furtan, William Hartley

    2008-01-01

    While mergers, both horizontal and vertical, have been shaping the landscape of the agri-food industry in Europe, the implications of the changing market structure on the level of innovation has not been studied yet. In this paper we deal with the link between innovation and market structure using the empirical example of the Danish agri-food industry. The purpose of this paper is two-fold. First we test for the importance of vertical integration on innovation. While there exist several studi...

  2. Strategic Partnerships and Open Innovation in the Biotechnology Industry in Belgium

    Directory of Open Access Journals (Sweden)

    Jean-Pierre Segers

    2013-04-01

    Full Text Available Strategic partnerships in the biotechnology industry allow new technology-based firms to gain a foothold in this high-cost, high-risk industry. In this article, we examine the impact of strategic partnerships and open innovation on the success of new biotechnology firms in Belgium by developing multiple case studies of firms in regional biotechnology clusters. We find that, despite their small size and relative immaturity, new biotechnology firms are able to adopt innovative business models by providing R&D and services to larger firms and openly cooperating with them through open innovation.

  3. COP21: defense stakes

    International Nuclear Information System (INIS)

    Coldefy, Alain; Hulot, Nicolas; Aichi, Leila; Tertrais, Bruno; Paillard, Christophe-Alexandre; Piodi, Jerome; Regnier, Serge; Volpi, Jean-Luc; Descleves, Emmanuel; Garcin, Thierry; Granholm, Niklas; Wedin, Lars; Pouvreau, Ana; Henninger, Laurent

    2015-01-01

    The 21. Conference of the Parties (COP21) from the UN Framework Convention took place in Paris between November 30 and December 11, 2015. The challenge is to reach a universal agreement of fight against global warming and to control the carbon footprint of human activities. This topic is in the core of the Defense Ministry preoccupations. This special dossier takes stock of the question of defense issues linked with global warming. The dossier comprises 13 papers dealing with: 1 - COP21: defense stakes (Coldefy, A.); 2 - Warfare climate, a chance for peace (Hulot, N.); 3 - COP21 and defense (Aichi, L.); 4 - A war climate? (Tertrais, B.); 5 - Challenges the World has to face in the 21. century (Paillard, C.A.); 6 - Desertification: a time bomb in the heart of Sahel (Piodi, J.); 7 - The infrastructure department of defense in the fight against climate disturbance (Regnier, S.); 8 - Fight against global warming, a chance for the forces? (Volpi, J.L.); 9 - Sea and sustainable development (Descleves, E.); 10 - Rationales of Arctic's surrounding powers (Garcin, T.); 11 - Arctic: strategic stake (Granholm, N.; Wedin, L.); 12 - Strategic impact of Turkey's new energy choices (Pouvreau, A.); 13 - Climate and war: a brief historical outlook (Henninger, L.)

  4. The use of creative stimuli at early stages of industrial product innovation

    DEFF Research Database (Denmark)

    Howard, Thomas J.; Dekoninck, Elies A.; Culley, Steve J.

    2010-01-01

    Creative ideas are essential to original concept generation and ultimately innovation. But where and when do these vital creative ideas occur during product innovation and more importantly how can they be influenced? The following paper describes an industrially based study of several innovation...... prescribed creative stimuli being used during the brainstorm sessions in relation to the output of the innovation process. The results showed that the frequency of idea production remained roughly constant during the first 30 min but steadily reduced after this period. However, the number of 'appropriate...

  5. Key Success Factors for Organizational Innovation in the Fashion Industry

    Directory of Open Access Journals (Sweden)

    Fabio De Felice

    2013-08-01

    on the Balanced Scorecard (BSC and the Analytic Network Process (ANP, called ‘MAB’ – Multi-criteria Assessment Balanced Scorecard. Firstly, key performance indicators (KPIs are evaluated in order to assess the performance level of a typical fashion industry. The development of an index system and methods is aimed to form a set of useful tools for policy-makers to facilitate the transformation of an industrial development mode and support the performance of the fashion industry.

  6. Maturity analysis of the innovation system in the livestock industries of West Sumatra, Indonesia

    Science.gov (United States)

    Suresti, A.; Dinata, U. G. S.; Wati, R.

    2018-02-01

    The main objective of this study was to analyse the ANIS of Livestock industry in West Sumatera according to its main determinants. This research aims to know and understand the maturity level of the regional innovationsystem of West Sumatra livestock industries, including recommendation for improvements. The maturity level of the regional innovation system was analyzed with the ANIS method by using an opinion survey to some experts from businessmen, government and universities. This expert opinion survey was conducted to measure expert perceptions on the implementations of determinants of west Sumatera regional innovations systems on livestock industries on macro level (innovations policy), mezzo level (innovation institutions and programs) and micro level (innovation capacity). By using Likert method, the result showed maturity level for the West Sumatra livestock industries innovation system was still develop. This is caused by low maturity in the macro and meso determinants which are at the central and regional government side. This research result may be useful as recommendations for the government for improving the maturity level and may be a basic for incoming researches to identify regional innovation system determinants with low maturity to improve.

  7. The Role of Sustainable Service Innovation in Crafting the Vision of the Hospitality Industry

    Directory of Open Access Journals (Sweden)

    Jeou-Shyan Horng

    2016-03-01

    Full Text Available The purpose of this study was to examine the key characteristics of sustainable service innovation in the hospitality industry. We conducted a content analysis based on the interview records for 17 experts (including three academic scholars, three government officers and 11 top-level managers with an average of 20 years of experience in the hospitality management domain in Taiwan. The analytical results conform to Amabile’s (1988 componential theory of creativity and innovation and show that 11 characteristics are major indicators of sustainable service innovation in the hotel management field. These include the following characteristics: market position, customer satisfaction, service orientation, environmental thinking, employee involvement, incentive mechanism, human resource development, environmental services, cultural resource management, government policy and school education. Accordingly, using the integrated theory of sustainable service innovation and professional opinions from experts, we provide theoretical and practical implications for current and future trends on sustainability and innovation in the hospitality industry.

  8. The economics of nuclear power: four essays on the role of innovation and industrial organization

    International Nuclear Information System (INIS)

    Berthelemy, Michel

    2013-01-01

    This thesis studies the role of innovation and industrial structures in the nuclear power sector. The analysis of innovation is based on the use of patent data as a measure of innovation effort. On the one hand, we study the determinants of innovation and, on the other hand, its impact on operating and safety performance of existing nuclear reactors and on construction costs. We show that nuclear safety regulation can induce innovation and improve safety performance, but at the same time contributes to increases in construction costs. The analysis of the role of industrial structures allows us to study the impact of learning by doing opportunities both for construction and operation of reactors, as well as the effect of electricity market liberalization on operating performance. In particular, we show that the divestiture of electricity production and distribution activities induces a substantial improvement in the availability of nuclear reactors. (author)

  9. Adoption of financial innovation in the Ghanaian banking industry

    African Journals Online (AJOL)

    financial instruments, and the massive growth in information technology have fueled the growing ... positive effect on consumers' adoption of those innovations. Perceived ... coupled with virtually absolute control over their banking. Mobile ..... et al., 2006). Thus, these values suggest good internal consistency of the factors.

  10. Securing innovation through a differentiated supply system : The fashion industry

    NARCIS (Netherlands)

    Kamann, Dirk-Jan F.; Steller, Daan; Kaminishi, K; Duysters, G

    2007-01-01

    This paper describes a Situation where next to very innovative goods with short life cycles and volatile demand, rather commodity type goods are carried with more stable demand. A 'Two Lane Strategy' is described, with two different configurations of actors in the company's supply system. In each of

  11. University–industry collaboration: Jump-starting innovation | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2010-10-06

    Oct 6, 2010 ... In Costa Rica, researchers and business have found innovative ways to ... To jump-start these collaborations, IDRC is supporting research teams in 12 ... steel company recently tried to license a type of steel easy to mould into ...

  12. Grand Challenge Portfolio: Driving Innovation in Industrial Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    None

    2011-01-04

    Under the Recovery Act, AMO provided cost-shared funding for early-stage, low-cost, "concept definition studies" of 47 promising innovations for next-generation manufacturing, energy-intensive processes, advanced materials, and greenhouse gas emissions reduction. The brochure provides information on each of these projects.

  13. Developing National Systems of Innovation: University-Industry ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2015-01-30

    Jan 30, 2015 ... Interactions between firms and universities are key building blocks of innovation systems. With a focus on developing countries, this book presents novel comparative research spanning three continents. The result is a more universal and dynamic view of the shaping and reshaping of interactions between ...

  14. The Role of University Scientist Mobility for Industrial Innovation

    DEFF Research Database (Denmark)

    Ejsing, Ann-Kathrine; Kaiser, Ulrich; Kongsted, H.C.

    . Combining patent data and matched employer-employee data for Danish firms, we can track the labor mobility of R&D workers from 1999 to 2004. We find that new joiners contribute more than long-term employees to innovative activity in the focal firm. Among new firm recruits, we observe that newly hired former...

  15. Managing knowledge boundaries for open innovation - lessons from the automotive industry : lessons from the automotive industry

    NARCIS (Netherlands)

    Wilhelm, Miriam; Dolfsma, Wilfred

    2018-01-01

    Purpose - The rising need to innovate and obtain knowledge from more distant knowledge sources calls for new innovation strategies and a better integration of other external actors who lie outside the traditional automotive supply chain. Such an open innovation strategy challenges organizational

  16. Service innovation management practices in the telecommunications industry: what does cross country analysis reveal?

    Science.gov (United States)

    Rahman, Syed Abidur; Taghizadeh, Seyedeh Khadijeh; Ramayah, T; Ahmad, Noor Hazlina

    2015-01-01

    Service innovation management practice is currently being widely scrutinized mainly in the developed countries, where it has been initiated. The current study attempts to propose a framework and empirically validate and explain the service innovation practices for successful performance in the telecommunications industry of two developing countries, Malaysia and Bangladesh. The research framework proposes relationships among organisational culture, operating core (innovation process, cross-functional organisation, and implementation of tools/technology), competition-informed pricing, and performance. A total of 176 usable data from both countries are analysed for the purpose of the research. The findings show that organisational culture tends to be more influential on innovation process and cross-functional organisation in Malaysian telecommunication industry. In contrast, implementation of tools/technology plays a more instrumental role in competition-informed pricing practices in Bangladesh. This study revealed few differences in the innovation management practices between two developing countries. The findings have strategic implications for the service sectors in both the developing countries regarding implementation of innovative enterprises, especially in Bangladesh where innovation is the basis for survival. Testing the innovation management practices in the developing countries perhaps contains uniqueness in the field of innovation management.

  17. Do social factors matter for innovation, and do they influence innovation in Aeronautics Industry?

    OpenAIRE

    Yazan, Abdurrahman Mete

    2013-01-01

    Based on the report for the course on “Social Factors of Innovation” of the PhD Program on Technology Assessment, supervised by Prof. António Brandão Moniz, Monte de Caparica, University NOVA Lisbon, Faculty of Sciences and Technology, July 2013 As innovation plays an important role in economic growth and development, it is necessary to understand the factors, especially the social factors, which determine the differences in innovation intensity across countries and regions. However, sinc...

  18. Strategy and innovation. study of the innovative capacity of the Spanish hotel industry

    OpenAIRE

    Martínez López, Antonio; Vargas Sánchez, Alfonso

    2011-01-01

    This paper analyses the relationships between certain determinants in the strategic management process on innovation in hotel organisations in Spain, as well as the influence of the level of innovation on competitive advantage and organisational performance. The theoretical positioning is based on the resource and capability-based approach, within the field of strategic management. An analysis of major hotel chains operating in Spain has shown that certain factors (namely twenty dimensions) o...

  19. Dynamic Innovation strategies and stable networks in the construction industry

    DEFF Research Database (Denmark)

    Andersen, Poul Houman; Cook, Nicole; Marceau, Jane

    2004-01-01

    This paper investigate the role of interorganisational networking for technology diffusion in an industry characterized by very limited R&D activity. Udgivelsesdato: APR......This paper investigate the role of interorganisational networking for technology diffusion in an industry characterized by very limited R&D activity. Udgivelsesdato: APR...

  20. Active Learning for Creating Innovators: Employability Skills beyond Industrial Needs

    Science.gov (United States)

    Ito, Hiroshi; Kawazoe, Nobuo

    2015-01-01

    In 2012, Japan's Ministry of Education, Culture, Sports, Science, and Technology initiated a project entitled "Improving Higher Education for Industrial Needs" in which 147 universities have participated. One of the main purposes of this project is to identify what industrial needs and help develop university students' employability…

  1. An innovation-focused roadmap for a sustainable global photovoltaic industry

    International Nuclear Information System (INIS)

    Zheng, Cheng; Kammen, Daniel M.

    2014-01-01

    The solar photovoltaic (PV) industry has undergone a dramatic evolution over the past decade, growing at an average rate of 48 percent per year to a global market size of 31 GW in 2012, and with the price of crystalline-silicon PV module as low as $0.72/W in September 2013. To examine this evolution we built a comprehensive dataset from 2000 to 2012 for the PV industries in the United States, China, Japan, and Germany, which we used to develop a model to explain the dynamics among innovation, manufacturing, and market. A two-factor learning curve model is constructed to make explicit the effect of innovation from economies of scale. The past explosive growth has resulted in an oversupply problem, which is undermining the effectiveness of “demand-pull” policies that could otherwise spur innovation. To strengthen the industry we find that a policy shift is needed to balance the excitement and focus on market forces with a larger commitment to research and development funding. We use this work to form a set of recommendations and a roadmap that will enable a next wave of innovation and thus sustainable growth of the PV industry into a mainstay of the global energy economy. - Highlights: • We construct a two-factor learning curve model to quantify the effect of innovation. • We identify the industry-wide oversupply a barrier for incentivizing innovations. • We build a conceptual framework to inform an innovation-focused roadmap for the PV industry. • We recommend open data model for PV to accelerate policy and market innovations

  2. International Asia Conference on Industrial Engineering and Management Innovation

    CERN Document Server

    Shen, Jiang; Dou, Runliang

    2013-01-01

    The International Conference on Industrial Engineering and Engineering Management is sponsored by the Chinese Industrial Engineering Institution, CMES, which is the only national-level academic society for Industrial Engineering. The conference is held annually as the major event in this arena. Being the largest and the most authoritative international academic conference held in China, it provides an academic platform for experts and entrepreneurs in the areas of international industrial engineering and management to exchange their research findings. Many experts in various fields from China and around the world gather together at the conference to review, exchange, summarize and promote their achievements in the fields of industrial engineering and engineering management. For example, some experts pay special attention to the current state of the application of related techniques in China as well as their future prospects, such as green product design, quality control and management, supply chain and logist...

  3. Applying of artificial intelligence in the textile industry as factor of innovative development of the branch

    OpenAIRE

    Yuldashev N.; Tursunov B.

    2018-01-01

    In the article, the authors carried out a theoretical analysis of the practical applications of artificial intelligence in various fields. It is concluded that the use of artificial intelligence in the textile industry, in particular in management, will serve as a jerk to the innovative development of the industry.

  4. Responsible Research and Innovation in industry-challenges, insights and perspectives

    NARCIS (Netherlands)

    Martinuzzi, André; Blok, Vincent; Brem, Alexander; Stahl, Bernd; Schönherr, Norma

    2018-01-01

    The responsibility of industry towards society and the environment is a much discussed topic, both in academia and in business. Responsible Research and Innovation (RRI) has recently emerged as a new concept with the potential to advance this discourse in light of two major challenges industry is

  5. [Development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry].

    Science.gov (United States)

    Xiao, Yong-Qing; Li, Li; Liu, Ying; Ma, Yin-Lian; Yu, Ding-Rong

    2016-01-01

    To elucidate the key issues in the development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry Chinese herbal pieces industry. According to the author's accumulated experience over years and demand of the development of the Chinese herbal pieces industry, the key issues in the development and innovation on the Chinese herbal pieces industry were summarized. According to the author, the traditional Chinese medicine processing discipline shall focus on a application basis research. The development of this discipline should be closely related to the development of Chinese herbal pieces. The traditional Chinese medicine processing discipline can be improved and its results can be transformed only if this discipline were correlated with the Chinese herbal pieces industry, matched with the development of the Chinese herbal pieces industry, and solved the problems in the development on the Chinese herbal pieces industry. The development of traditional Chinese medicine processing discipline and the Chinese herbal pieces industry also requires scientific researchers to make constant innovations, realize the specialty of the researches, and innovate based on inheritance. Copyright© by the Chinese Pharmaceutical Association.

  6. CSIR research, development and innovation initiatives for the medical device and diagnostic industry

    CSIR Research Space (South Africa)

    Vilakazi, Busisiwe

    2017-10-01

    Full Text Available This presentation is focused on development and innovation initiatives in the medical device and diagnostic industry. It is presented by Dr Busisiwe Vilakasi at The 6th CSIR Conference: Ideas that work for industrial development, 5-6 October 2017...

  7. Procurement of non-incremental sustainable technology innovations : entrepreneurial firms supplying the New Zealand construction industry

    NARCIS (Netherlands)

    Staal, Anne; Tookey, John

    Traditionally construction industries in New Zealand and abroad have a low track record for successful sustainable innovations. This has a negative impact on private and government spending, and on quality, society and the environment. This conceptual paper posits that the construction industry

  8. Summary of innovative concepts for industrial process improvement: An experimental technology exchange

    Energy Technology Data Exchange (ETDEWEB)

    Conger, R.L. [Pacific Northwest Lab., Richland, WA (United States); Lee, V.E.; Buel, L.M. [eds.] [Pacific Northwest Lab., Richland, WA (United States)

    1995-08-01

    This document is a compilation of one-page technical briefs that summarize the highlights of thirty-eight innovations that were presented at the seventh Innovative Concepts Fair, held in Denver, Colorado on April 20--21, 1995. Sixteen of the innovations were funded through the Innovative Concepts Program, and twenty-two innovations represent other state or federally funded programs. The concepts in this year`s fair addressed innovations that can substantially improve industrial processes. Each tech brief describes the need for the proposed concept; the concept being proposed; and the concept`s economics and market potential, key experimental results, and future development needs. A contact block is also included with each flier.

  9. Effects of Internationalization on Innovation in the Service Industry: Evidence from Korea

    Directory of Open Access Journals (Sweden)

    Jaeho Lee

    2014-12-01

    Full Text Available This paper examines the impact of internationalization on the product, process and organizational innovations of Korean service firms. Despite the increasing importance of the service sector and the discrepancies in the natures of the manufacturing and service industries, the internationalization-innovation link in the context of service firms has rarely been examined empirically on a large sample. Based on the results of the logistic regressions using the 2006 Korean Innovation Survey data, we found that Korean service firms' international expansion is significantly and positively associated with their product and organizational innovations. In addition, the magnitude of the estimates in our models revealed that internationalization has a greater impact on product innovation than on process or organizational innovation.

  10. Organizational Culture, Absorptive Capacity, Innovation Performace and Competitive Advantage: An Integrated Assessment in Indonesian Banking Industry

    Directory of Open Access Journals (Sweden)

    Ahmad Adriansyah

    2015-06-01

    Full Text Available The positive impact of absorptive capacity (ACAP on innovation and the positive impact of innovation on competitive advantage have been proven in different research contexts. However, current knowledge on organizational culture that affects ACAP, innovation and competitive advantage as a whole, remains unclear. This article proposes a model to examine how organizational culture (developmental culture and rational culture affects ACAP, innovation and competitive advantage, directly and indirectly as well.  Surveyed data (in Indonesian Banking Industry shows that both of organizational culture have a direct impact on ACAP. Only developmental culture has a direct impact on innovation. There is no culture type affects competitive advantage directly. In this research, culture affects competitive advantage through ACAP and innovation.    

  11. Impact of Technological Innovations on Customers in an Emerging Banking Industry in Ghana

    DEFF Research Database (Denmark)

    Kofi Wireko, Joseph; Ameme, Bright

    2016-01-01

    . Whilst banks derive efficiency from these innovations, customers are however impacted with convenience and transaction costs offered by these innovative services and electronic activities. This study sought to understand the impact of these electronic banking services on customer satisfaction and related....... Whilst the study concluded that there is a significant relationship between customer satisfaction and technological innovations in the Ghanaian banking industry, it was revealed that the costs associated with technological innovations in banking have also increased transactions costs to the disadvantages......Without continuous technological innovations in today’s highly digital world, it will be extremely difficult for banks to remain relevant within the competitive landscape. Bank customers are also becoming very sophisticated and their demands drive the direction of these technological innovations...

  12. Mastering the political Process of Building Innovation Networks - A Case from the Danish Construction Industry

    DEFF Research Database (Denmark)

    Stissing Jensen, Jens; Koch, Christian; Thomassen, Mikkel

    2008-01-01

    Drawing on network of innovation and organizational politics perspectives this paper analyzes the role of an innovation broker organization in developing and supporting an inter-organizational innovation process in the Danish construction industry. The aim is to implement an ICT-based product...... configuration tool to support the production, sale, and installation of balconies. It is suggested that the innovation broker was successful in stabilizing the innovation process by supplying minimal structures which provided a template which facilitated a combination of individual flexibility and overall...... the network. The innovation thus grew strong enough to replace existing practices and identities and to embed new ones into new organizational structures and a new business-concept...

  13. STUDY ON PARTICULAR FEATURES OF RUSSIAN INNOVATIVE INDUSTRIAL CORPORATIONS DEVELOPMENT AND FUNCTIONING

    Directory of Open Access Journals (Sweden)

    A. A. Astakhov

    2011-01-01

    Full Text Available Owing to globalization and world economic crisis consequences, present stage of economic development of Russian industrial corporations presumably belonging to the military industrial complex and to the high-tech sector of economy is characteristic with toughened competition.At the same time, these industrial enterprises endure fundamental transformations aimed at manufacture of innovative production. Under these conditions, a scientific/methodological deficiency formed in the field of financial and economic management of the corporations. Key problems are discussed whose solution may facilitate working out specialized organizational and economic strategic management mechanism for innovative development of the corporations.

  14. Feasibility study for an innovative industrial red mud utilisation method.

    Science.gov (United States)

    Kounalakis, Petros; Aravossis, Konstantinos; Karayianni, ChS

    2016-02-01

    Red mud is a high volume industrial waste, and its management poses a unique challenge. For the utilisation of red mud, an economical, energy saving, environmental friendly and widely applicable method has been found. The proposed novel method is purely chemical, and achieves the recovery of all the oxides contained in red mud totally and transforms them into high value added products. The present work shows that an investment in an industrial plant, treating red mud and turning a toxic industrial waste in commercial products, is safe and viable. © The Author(s) 2015.

  15. Determining Technological Innovation and Competitiveness: A Cross Organizational Analysis of the Malaysian Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Amlus Ibrahim

    2012-01-01

    Full Text Available This study analyzed the determinants of technological innovation in the Malaysian manufacturing industry. Its main purpose is to identify a set of management- related variables characterizing Malaysian innovative firms. Moreover, the study aimed to test whether the set of determinant differs for firms with different technological trajectories. A sample of 204 Malaysian firms was used for the investigation, with one respondent from each firm. The questionnaire measured the technological innovation, as well as 5 main potential determinants of innovation adopted from literature. Statistical analysis used, including bivariate correlation and multivariate regression, in identifying association between the technological innovation and the determining variables. The results of the analysis lead the researcher to the model of 5 important determining factors of technological innovation. The important factors were intensity of R&D, trvhnoogical trajectories,intensity of marketing, engineers, scientist and managers with experience locally and technical competency of personnel,. The analysis of technological trajectories confirmed the hypotheses that set of important determinants of innovation as well as the extent of technological innovation differs for firms in different innovation processes.Keywords: Technologies trajectories, technological innovation, intensity of R&D.

  16. INNOVATIVE RESERVES OF LABOR PRODUCTIVITY IMPROVE IN NATIONAL ENTERPRISES OF SUGAR INDUSTRY

    Directory of Open Access Journals (Sweden)

    T. Kostenko

    2015-06-01

    Full Text Available Overcoming the innovative inertia and effective use of innovative reserves of labor productivity increase in domestic sugar factories is an important step towards the revival of strategically important sector for Ukraine’s economy and the key to its future development in the long run. The aim of the article is to search and study of innovative reserves of labor productivity increase in domestic enterprises of sugar industry. The international experience of innovation implementing in sugar industry enterprises is studied. The paper proves that management innovation is innovative reserves of labor productivity improve in the domestic sugar enterprises. The study analyzes overall trends of innovation development and dynamics of labor productivity in the sugar factories of Ukraine during the period of 2003-2013. The benefits and risks of laboratory tests of sugar beets and sugar are overviewed for the optimal technological mode of production installation on terms of outsourcing. The necessity and economic effectiveness of laboratory research outsourcing is proved to create the optimal technological mode of sugar production. It will improve labor productivity and quality of sugar, increase production and develop new profitable activities of sugar industry enterprises.

  17. Competitor localization and innovation activity of peripheral industrial systems in Poland

    OpenAIRE

    Arkadiusz Swiadek

    2013-01-01

    Spatial proximity to competitors is an important factor in the acceleration of technological change in industrial systems in most developed countries, but is it also in Poland? The main objective of the study was to identify and evaluation the impact of distance from the nearest competitor on the innovative activity of selected peripheral regional industrial systems in Poland. Surveys conducted in the years 2007-11, including a group of 1 860 industrial companies in the five diverse and locat...

  18. Determinants of innovation in energy intensive industry and implications for energy policy

    International Nuclear Information System (INIS)

    Song, ChiUng; Oh, Wankeun

    2015-01-01

    Abstracts: The Korean government adopted “green growth” in 2008 as an environmentally friendly growth strategy. The energy efficiency of Korea, however, is still relatively low due to the large portion of energy intensive industry (EII) in its manufacturing sector. To improve energy efficiency in Korea, from an EII perspective a new approach has to be taken because restructuring entire industries would take too much time and be too costly. This study aims to emphasize the importance of innovation and analyze the effects of R&D on product and process innovations in EII in Korea. The Probit model is adopted to estimate the effects of eight determinants in the Korea Innovation Survey 2008 data. The results of this study demonstrate that one of the most important determinants, the R&D personnel ratio, has a strong positive effect on both product and process innovation, while another determinant, R&D intensity, only has a strong and positive effect on process innovation in EII. Because of the resulting innovation, energy policies should be enacted to enhance energy efficiency. Thus, the Korean government should keep providing incentives for firms in EII to invest more financial and human resources in their R&D activities. -- Highlights: •We analyze determinants on two innovations in energy intensive industry (EII). •The R&D personnel ratio is effective in product innovation in EII. •Both R&D intensity and R&D personnel are effective in process innovation in EII. •In less EII, R&D variables have positive effects on product and process innovations. •The Korean government should strongly support R&D to improve energy efficiency

  19. Identification of patent in incentivizing innovation for sustainability in the construction industry

    Science.gov (United States)

    Zakaria, Sharifah Akmam Syed; Sadullah, Ahmad Farhan Mohd; Majid, Taksiah A.; Ghazali, Farid Ezanee Mohamed

    2017-07-01

    The increasing trend of research and innovation developments in the field of construction industry and their impacts on the national economy have raised much attention in the recent years. In this respect, through the relationship that exists between innovation and patent protection means that the education system of civil engineering has to gear itself to provide a sense of direction to facilitate future civil engineers to meet the challenges through innovation. The aim of this paper is to examine the educational experience and inclination of civil engineering students at Universiti Sains Malaysia in terms of their educational readiness to invent and innovate based on patents' exploration. Specifically, this paper presents research evidence using a quantitative method through questionnaire surveys in determining the dimension of patent information usage for innovation purposes, with attention to the hierarchy of each usage aspect and outcome measures reported. Results of this study revealed that majority of the participants have a "simplistic and superficial" ideas of patents identification as a source of innovation. Although a fair number of participants have relatively good knowledge of patents and innovation, lack of practical exposure and experience in construction industry are still a problem frequently encountered in the preparation to invent and innovate based on patents' exploration. It is recommended that the research model is tested using a greater number of research participants.

  20. Mapping performance of the fishery industries innovation: A survey in the North Coast of Java

    Science.gov (United States)

    Yusuf, M.; Legowo, A. M.; Albaarri, A. N.; Darmanto, Y. S.; Agustini, T. W.; Setyastuti, A. I.

    2018-01-01

    This study aimed to put the performance indicators of industry innovation fisheries which would be used as inputs to create innovation strategies in order to win the market competition, especially in USA. Survey and in-depth interviews were conducted on 10 industries with shrimp, tuna and crab commodities representing the fishery industry in Indonesia to USA export destination. The result of mapping performance of innovation indicators of Indonesian Fishery Industry resulted the 10’s strategies alternative to win the market. Based on survey result indicate that “the regulation of catch and/or harvest of cultivation factor” is considered the weakest factor in develop innovation with a score of 3.3, while the international trade factor are considered as the strongest factor in developing innovation development with scores 5,0. Aggressive strategy by strengthening the strength owned by the internal industry was by always looking at the opportunity, so that they could take the opportunity to win the market competition at the right time.

  1. Physics-Driven Innovation In the Oil and Gas Industry

    Science.gov (United States)

    Poitzsch, Martin

    2014-03-01

    In terms of sheer scale and financial investment and geographical footprint, nothing is bigger than the oil and gas industry. This ``mature industry'' employs a bewildering mix of technologies dating from the 19th century to the 21th. Oil well construction represents one of the largest volume markets for steel tubulars, Portland cement, and high-quality sand. On the other hand, advanced 3D seismic data processing, shaped-charge perforating, and nuclear well logging have consistently driven forward the state of the art in their respective areas of applied science, as much or more so than defense or other industries. Moreover, a surprising number of physicists have made their careers in the oil industry. To succeed at introducing new technology requires understanding which problems most need to be solved. The most esoteric technology can take off in this industry if it honestly offers the best solution to a key problem that is costing millions of dollars in risk or inefficiency. When the right breakthrough solution emerges, the resources to implement it can be almost limitless. However, the prevailing culture is conservative and brutally cost-driven: any cheaper or simpler solution that performs as well will prevail, no matter how inelegant!

  2. Developing National Systems of Innovation : University-Industry ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    30 janv. 2015 ... Grâce à la participation d'experts, un ensemble d'études empiriques et d'exposés théoriques est présenté, des études sur les systèmes d'innovation sont quantifiées et de nouvelles avenues de recherche sont proposées. Les lecteurs pourront accroître leur compréhension de la relation dynamique qui ...

  3. Innovative applications for the PV industry; Innovative Applikationen fuer die Photovoltaik

    Energy Technology Data Exchange (ETDEWEB)

    Weingaertner, Anette

    2011-02-17

    Laser technology supports the development of innovative solar cells. In thin film technology, lasers have been the tool of choice for quite some time already, and in organic photovoltaics there are some initial approaches for the use of lasers in the production process. Producers of solar systems are hoping for rapid progress in order to make fabrication more efficient and improve efficiencies.

  4. Determinants of Innovation Culture: a Study of Textile Industry in Santa Catarina

    Directory of Open Access Journals (Sweden)

    Giancarlo Gomes

    2015-01-01

    Full Text Available The Brazilian textile industry has suffered the impact of products from Asian countries, mainly because of low prices. Seeking to determine the differential of the textile industry of the state of Santa Catarina, the objective of this study is to analyze the determinants of organizational culture –strategy, structure, support mechanisms, stimulus to innovation and communication –that influence innovation in textile companies in the state, based on a survey among 441 respondents from 16 firms. Data were analyzed using structuralequation modeling. We conclude that organizational structure was the dimension that had the strongest influence in shaping the culture of innovation. Flexibility and the presence of multifunctional teams are indicators that show that organizations are working to develop a culture of innovation.

  5. Innovative 3D-printing technology in the fashion industry

    OpenAIRE

    Anna Rykavishnikova; Anna Evseeva

    2015-01-01

    This article describes improved methods of 3D-printing technology is their advantage, as well as used in modern fashion-industry. 3D-press began with the image on a fabric, flags, banners, advertising signs, furniture upholstery design, souvenirs. Improved and most commonly used in the fashion industry 3D-printing technology is the selective laser sintering. 3D-press is also used in the production of not only clothing, but also footwear company Nike; glasses, rings and other accessories.

  6. Promoting coal industry in China through innovative financing

    International Nuclear Information System (INIS)

    Rong Geng

    1997-01-01

    Since energy has constituted itself a bottleneck in the economic development in China, the development of energy has long become an important element of the country's policies on the industry. Policies and credit operations of the state development bank in support of coal development in China are discussed. To support the coal industrial growth of the country, the State Development Bank has been engaging itself in the coal credit operations. At present in China, 90 % of the funds for the large and medium-sized coal projects are loans from the state banks with the rest 10 % being foreign investment. Actions to attract more foreign investment for China are discussed. (R.P.)

  7. Playing on strengths : technical innovations keep Canadian industry on top

    International Nuclear Information System (INIS)

    Harvie, W.

    1997-01-01

    The Western Canada Sedimentary Basin is one of Canada's major petroleum regions. Some fields in the region have been in production for 80 years. Since most of the major discoveries have been made, the challenge today is to use new technologies to find smaller reservoirs and to extract as much oil as possible from the depleting reserves. The following technical innovations were developed by Canadian companies for enhanced oil recovery: (1) steam assisted gravity drainage for heavy oil, (2) horizontal drilling, (3) coiled tube drilling, (4) single well steam assisted gravity drainage, (5) hydrocyclone technology in which briny water is sent down the borehole for reinjection and in which centrifugal force sends the lighter oil to the middle of the hydrocyclone where it is collected, and (6) portable top drives aimed at newer versions of large land drilling rigs and offshore operations. Multi-lateral techniques have also been used to increase production on heavy oil properties. These and other technical innovations are recognized as the single best advantage that Canadians have to offer the global marketplace. 4 figs

  8. Plasma physics: innovation in energy and industrial technology

    International Nuclear Information System (INIS)

    Harris, J.H.

    2000-01-01

    Full text: Plasmas-ionised gases-are truly ubiquitous. More than 99% of the matter in the universe is in the plasma state. All of the matter that comprises the Earth, and all of the energy that powers it, has been processed through plasma fusion reactions in stars. Plasmas also play a crucial role in the Earth's atmosphere, which screens out harmful radiation, and make long distance radio propagation possible. While the study of plasma physics was originally motivated by astrophysics, the discipline has grown to address terrestrial concerns. These include lighting, welding, the switching of large electrical currents, the processing of materials such as semiconductors, and the quest to build fusion power reactors artificial stars for low-emissions generation of electricity from hydrogen isotopes. Plasma physics is fundamentally multi-disciplinary. It requires understanding not only of the complex collective behaviour of ionised gases in unusual conditions, but also knowledge of the atomic and nuclear physics that determines how plasmas are formed and maintained, and the specialised engineering and instrumentation of the mechanical and electromagnetic containers needed to confine plasmas on Earth. These characteristics make plasma physics a fertile breeding ground for imagination and innovation. This paper draws together examples of innovation stimulated by plasma physics research in the areas of energy, materials, communications, and computation

  9. THE DETERMINANTS OF INNOVATION IN THE ITALIAN FOOD INDUSTRY: THE ROLE OF R&D NETWORKING

    OpenAIRE

    D'Alessio, Massimiliano; Maietta, Ornella Wanda

    2008-01-01

    Objective of the paper is to verify which are the determinants of innovations in the Italian food industry and which role R&D networking, through the cooperative nature of firm, plays among these determinants. The data used are the 9th (2001-2003) wave of Capitalia surveys based on a representative sample of manufacturing firms with information on firm characteristics, employee education levels, innovation and R&D investments. The approach is a bivariate probit analysis where the two dependen...

  10. Managing Disruptive Innovation through Service Systems – The Case of Crowdlending in the Banking Industry

    OpenAIRE

    Blohm, Ivo; Haas, Philipp; Peters, Christoph; Jakob, Thomas; Leimeister, Jan Marco

    2016-01-01

    The Internet has affected and partially radically changed the business models of traditional industries. Crowdfunding as a new concept of funding over the Internet by a large crowd has especially gained maturity. Crowdfunding offerings range from funding charitable projects or innovative gadgets to a funding alternative for start-ups or small businesses. Therefore, crowdfunding represents an innovative way to provide liquidity for illiquid markets. With regard to the banking crisis and the gr...

  11. An Empirical study on the competitiveness and innovation in four sectors of the Turkish manufacturing industry

    OpenAIRE

    Ulusoy, Gündüz; Ulusoy, Gunduz; Çetindamar, Dilek; Cetindamar, Dilek; Yeğenoğlu, Hande; Yegenoglu, Hande; Bulut, Çağrı; Bulut, Cagri

    2007-01-01

    In this paper, we report on some of the results of the Innovations in Manufacturing Industries in Turkey Study (IMITS). This study is an empirical investigation into the innovation performance and competitive strategies of manufacturing firms in Turkey. The data was gathered in nine different cities in Turkey during the period August 2004 – January 2005. The survey was conducted through face-to-face interviews due to the complex nature of the survey and was implemented in 135 manufacturing fi...

  12. Factors behind response strategies of incumbent firms to disruptive innovation: case of TV broadcasting industry

    OpenAIRE

    Markevičiūtė, Imantė

    2017-01-01

    Disruptive technologies and business models are fundamentally changing the established ‘rules of the game’ in many industries. Thus, finding an adequate response becomes a matter of survival to companies touched by disruptive innovation. The current research is attempting to reveal the factors determining the response strategy of local incumbent TV broadcasters to global disruptive innovation. In order to do so, these research objectives are pursued in order to answer the research question: t...

  13. Essays on empirical industrial organization : Entry and innovation

    NARCIS (Netherlands)

    Fernandez Machado, Roxana

    2017-01-01

    The dissertation contains three essays on empirical industrial organization devoted to studying firms' strategic interaction in different settings. The first essay develops an entry model to address an important matter in the area of urban economics: the development of cities. In particular, it

  14. Development Factors of Shipping Industry Special Zone to Support Regional Innovation System

    Directory of Open Access Journals (Sweden)

    Eko Budi Santoso

    2014-12-01

    Full Text Available The central government has established the industry road map through MP3EI to support the shipbuilding industry. The region of Surabaya, Gresik, Lamongan and Tuban areas will be developed as the national shipping industry. The purpose of this study is to f ormulate the shipbuilding industry development cooperation to support the development of regional innovation systems. The goal and objectives are to identify the type of support the shipbuilding industry in Lamongan, to obtain a general picture of the existing condition of shipbuilding industries and the subsequent descriptive analysis to identify factors that influence the development of the shipbuilding industry. The method is using a theoretical review of the literature and the descriptive analysis of the results of depth interviews with stakeholders in Lamongan. The results of this study are the factors that influence the development of the shipbuilding industry.

  15. Organisation, ‘anchoring’ of knowledge, and innovation in the construction industry

    DEFF Research Database (Denmark)

    Drejer, Ina; Vinding, Anker Lund

    2004-01-01

    explanation for the relatively poor innovation performance of the industry. Using survey data from the Danish construction industry the paper investigates the importance of learning and ?anchoring? of project specific knowledge within the firms for facilitating engagement in innovative activities...... at the firm level. The data refer to the overall Danish construction industry, as well as a specific region, North Jutland, which is relatively specialised in construction. By using latent class and regression analysis the results show that firms, which to a high extent make use of partnering and other...... interorganisational features, combined with internal product and process evaluation and knowledge diffusion, are more likely to engage in innovative activities than firms that make less use of what we label ?knowledge anchoring mechanisms?. This indicates that there are ways for firms to compensate for the problems...

  16. Innovation in Neurosurgery: Intellectual Property Strategy and Academia/Industrial Collaboration.

    Science.gov (United States)

    Murayama, Yuichi

    2016-09-15

    Neurosurgery has tremendous possibilities for development of innovative medical devices. However, most of the neurosurgical devices used in Japan are imported products. Promotion and development of domestic medical devices is highly encouraged and it is one of the pillars of Prime Minister Shinzo Abe's growth strategy of Japanese economy. Innovative "Made in Japan" medical devices can be developed by interdisciplinary collaboration between industries and academic institutions. Proper orientation of medical and engineering education, social and administrative awareness of the need of facilitating the medical devices creative process with corresponding regulatory changes, and appropriate medical and technological infrastructure establishment are needed for stimulating medical device innovation.

  17. Dynamics of vendor innovation capability: Evidence from the Electronics Manufacturing Services industry

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

    2012-01-01

    and innovation. The first is the realization that vendor capabilities have been recognized as one of the most important factors for the success of outsourcing. The second refers to the fact that, even though innovation capability is required, vendors are still being selected, and their performance evaluated......, by traditional manufacturing capabilities, such as cost, quality, delivery, and flexibility. Taking a vendor’s perspective in outsourcing, we develop and present a conceptual framework for studying vendor innovation capability. We propose to test this framework in the Electronic Manufacturing Services Industry....

  18. Development of strategic cooperation of higher school and industrial enterprises to promote innovative development

    Directory of Open Access Journals (Sweden)

    A. O. Ermakov

    2016-01-01

    Full Text Available In this article the author analyzes the provisions of the national system of strategic planning of innovation development, of strategic planning documents within the formation of the concept of innovative development of the Russian economy, its transition to the knowledge economy Along with this, the author reviewed the current development indicators of the Russian economy and comparative analysis of world GDP and volumes of financing of scientific development of the countries of the world - the Global Competitiveness Report. The article provides the analysis and decomposition of component Pillar 12. Innovation on the innovative activity in Russia. The author gives the analysis on number of people employed in research and development personnel in the dynamics and by countries. The article presents information on the funding of scientific research in the United States, Japan, Russia, etc. as percentage of GDP and in absolute values. The article shows a consolidated list of used Russia's innovation promotion instruments (subsidies of costs for innovative projects, project financing, etc., taking account of links to documents, implementating these tools. The author considers problems of cooperation of Universities with industry in the establishment of such interaction as a factor of innovative growth in foreign literature. In the conclusion the author formulates a proposal for the intensification of research to improve forms of strategic partnership of universities and industrial enterprises on the basis of experience researchers form eastern countries, the results of applying the introduced tools at the state and regional levels and binding of adapting them to Russian realities and specifics.

  19. From Knowledge to Innovation and Back: Empirical Testing of Knowledge-Intensive Industries in Serbia

    Directory of Open Access Journals (Sweden)

    Nikola Radovanović

    2017-09-01

    Full Text Available Objective: In the technology and knowledge intensive industries, innovation and knowledge use are key elements for competitiveness. Organisations are oriented towards increasing their potential for exploiting innovation and developing knowledge base internally through various techniques employed. This research aims at analysing the relationship between the dynamics of knowledge use and innovation efforts of organisations. Research Design & Methods: The methodology included quantitative and qualitative research method based on a survey, while the data of this research were analysed with the application of descriptive statistical method (variance. Findings: The results of the study suggest that realised innovation correlates with the use of knowledge in organisations and that an increase in research and development activities, as well as in patented and non-patented products or services will likely lead to an increase in the volume of internal knowledge use by employees. Implications & Recommendations: The results of this research can be useful for researchers and practitioners in technology and knowledge intensive industries. The findings can be used as a basis for adjusting organisational policies towards developing competitiveness based on the enhancement of the use of existing knowledge and by developing innovation strength. Contribution & Value Added: This paper is a valuable contribution to research fields of organisational management, innovation management, knowledge management, absorptive capacity, and especially innovation management.

  20. The regional dimension of sectoral innovativeness: An empirical investigation of two specialized suppliers and two science-based industries

    DEFF Research Database (Denmark)

    Buerger, M.; Cantner, U.

    2011-01-01

    The aim of this paper is to test the way in which geographical proximity and technological relatedness relate to an industry's innovative output. Two mechanisms are therefore tested, namely, urbanization economies and the regional exploitation of technological relatedness. A new dataset is applied......, which includes German patent applications from within the period 1995 to 2006. Four industries are considered, two of which are science-based, whereas the remaining two are specialized supplier industries. While diversity is associated with high innovative output in the specialized supplier industries......, the same does not hold for science-based industries. However, both kinds of industries seem to benefit from recombinant innovation....

  1. Efficiency, Innovation and Organization in the Food Industry

    DEFF Research Database (Denmark)

    Hajderllari, Eliona

    product depends on the effect of the new technology on the incremental savings and costs as well as consumers’ aversion and the carbon emission market price. The carbon emission market is used as a key parameter which, besides the cost reduction, can potentially transform the GM product...... for an innovative product with potential environmental impact. An applied theoretical approach is implemented in the first two papers of this thesis in order to explore the economic effects of the introduction of an environmentally friendly genetically modified (GM) product, and the economic effects of the labeling...... to an environmental policy instrument. Paper II uses an applied theoretical model to analyze the economic effects of different labeling regimes in vertical markets. The model used in the paper consists of heterogeneous consumer preferences and heterogeneous producer returns in a vertical oligopoly setting...

  2. ENTREPRENEURIAL STRATEGIC INNOVATION MODEL FOR ATTAINING PREMIUM VALUE FOR THE SRI LANKAN GEM AND JEWELLERY INDUSTRY

    Directory of Open Access Journals (Sweden)

    Shyamalie Ekanayake

    2010-07-01

    Full Text Available Entrepreneurial innovative action is a four-pronged strategic integration; it mitigates financial risk in knowledge transfer and technology transfer, it integrates manufacturing and business strategy, and it provides policy remedy to transform the assets and capabilities of the value system. The innovation process utilises market innovations to establish a competitive advantage, gathers intellectual assets, attains proprietary rights and fosters the ability to implement appropriate strategies and sustain a competitive advantage, thus generating premium value. The entrepreneur's commitment uncovers market opportunities and exploits the inventiveness of value-system technologies to result in market innovation. The integration of the above-mentioned four forces with changing market needs transforms the capabilities of the value system to allow it to sustain business value regeneration and thus generate premium value. The failure of either one or all four forces of entrepreneurs' innovative strategies will lead to a reduction in the market value of the products and disintegrate the industry value system. This phenomena was observed in the gem and jewellery industry in Sri Lanka, where the industry has been capable enough to develop a competitive product base but has been positioned to experience a reduction in market value. This reduction has resulted in the disintegration of the industry value system, forcing firms to work in isolation.

  3. Modularised eco-innovation in the auto industry

    DEFF Research Database (Denmark)

    Christensen, Thomas Budde

    2011-01-01

    The article explores the integration of alternative drivetrain solutions in the automotive industry. The article includes an analysis of the structure of the conventional automotive value chain and presents four examples of alternative vehicle designs. The article concludes that the component sha...... sharing across drivetrain solutions such as the battery electric, the hybrid and the fuel cell system opens a window of opportunity for modular design strategies that may make integration into the otherwise locked conventional production system possible....

  4. Discontinuities in business model innovation of the Danish newspaper industry

    DEFF Research Database (Denmark)

    Holm, Anna B.

    Within this study, I have analysed emerging business models in the newspaper industry at large, including the role ongoing technological developments play (from paper-based towards digital platforms), and the key activities, which the newspapers undertake in redefining their core business model....... More specifically, I discuss how changes introduced during the on-going development of new content delivery channels have affected the traditional business model based on one delivery channel, i.e. printed newspaper....

  5. Saccharomyces pastorianus: genomic insights inspiring innovation for industry.

    Science.gov (United States)

    Gibson, Brian; Liti, Gianni

    2015-01-01

    A combination of biological and non-biological factors has led to the interspecific hybrid yeast species Saccharomyces pastorianus becoming one of the world's most important industrial organisms. This yeast is used in the production of lager-style beers, the fermentation of which requires very low temperatures compared to other industrial fermentation processes. This group of organisms has benefited from both the whole-genome duplication in its ancestral lineage and the subsequent hybridization event between S. cerevisiae and S. eubayanus, resulting in strong fermentative ability. The hybrid has key traits, such as cold tolerance and good maltose- and maltotriose-utilizing ability, inherited either from the parental species or originating from genetic interactions between the parent genomes. Instability in the nascent allopolyploid hybrid genome may have contributed to rapid evolution of the yeast to tolerate conditions prevalent in the brewing environment. The recent discovery of S. eubayanus has provided new insights into the evolutionary history of S. pastorianus and may offer new opportunities for generating novel industrially-beneficial lager yeast strains. Copyright © 2014 John Wiley & Sons, Ltd.

  6. Innovation Patterns in the Canned Fish Industry In Galicia (Spain

    Directory of Open Access Journals (Sweden)

    Manuel González-López

    2018-01-01

    Full Text Available In this paper, we analyze the compettve and innovatve trajectories followed by the canned fsh industry in recent tmes. We base our study on four case studies from the Galician industry in Spain, which comprises the largest share of the European canned fsh sector. At least four different innovaton paterns are found in the industry. The frst patern is a conservatve one where innovaton is seen as a risk and therefore maintaining current routnes is the chosen opton. The second patern has been defned as “large retailer-dominated” and is followed by companies that have signed exclusive agreements with large retailers, which increasingly determine most of their innovaton actvites. The third strategy we have defned as “territory-orientated,” since product innovaton and incorporaton of quality distnctons based on the territory are the main innovaton drivers. Finally, we have an “ecological or natureorientated” innovaton strategy where meetng ecological normatve requirements is the main innovaton driver.

  7. Proceedings of the wind energy industry conference : develop, innovate, export : held in conjunction with Quebec's first wind energy industry gala

    International Nuclear Information System (INIS)

    2008-01-01

    This conference was dedicated to the wind energy industry and business opportunities in Quebec, the rest of Canada and abroad. It was held in conjunction with Quebec's first wind energy industry gala which highlighted the organizations and individuals that have made outstanding contributions to the wind power sector in Quebec over the past three years. The entire conference focused on current and future requests for proposals in Quebec, innovation, and exports. Some fifteen reputed speakers shared their knowledge and experience regarding technological development and technical support available in Quebec. It was intended to clarify current and future issues affecting the wind power industry and to build key relations with leading wind energy players. The sessions of the conference were entitled: the wind energy industry in Quebec and Canada; issues surrounding requests for proposals; the players involved in the request for proposals; visual impacts of wind farms; data transmission during wind farm construction; innovating to move ahead of the crowd; innovation in practice; exporting as a means of development; and, exports in practice. A tour of the Baie-des-Sable wind farm was also provided. The conference featured 24 presentations, of which 2 have been catalogued separately for inclusion in this database. refs., tabs., figs

  8. Actionable Ethnography in Participatory Innovation: A Case Study

    DEFF Research Database (Denmark)

    Jaffari, Svenja; Boer, Laurens; Buur, Jacob

    2011-01-01

    In this paper we describe how ongoing work with ethnographic material in a participatory innovation sets the scene for innovation to happen. We elaborate on how actionable formats of ethnographic material have been mediated to industrial partners with a stake in an innovation project. We illustrate...... how the stakeholders engaged in activities such as sense-making, co-analysis, and cross-comparison of the ethnographic materials, and the specification and mapping of innovation opportunities. We argue that these activities served to establish a shared understanding and ownership of the participatory...

  9. Tools of integration of innovation-oriented machine-building enterprises in industrial park environment

    Directory of Open Access Journals (Sweden)

    К.О. Boiarynova

    2017-08-01

    Full Text Available The research is devoted to the development of the tools for the integration of innovation-oriented mechanical engineering enterprises into the environment of industrial park as functional economic systems, which are capable on the own development basis to provide the development of resident enterprises. The article analyzes the opportunities for the development of mechanical engineering enterprises. The formed structure of the mechanism of integration of mechanical engineering enterprises as functional economic systems into the industrial park environment is based on: 1 the development of participation programs in the industrial park of the mechanical engineering enterprises as an innovation-oriented partner, which foresees the development of the enterprise immediately and the development of other residents; 2 the provision of high-tech equipment of resident enterprises of industrial parks; 3 the creation of subsidiary-spin-out enterprises of large mechanical engineering enterprises for high-tech production in the industrial park. The author proposes the road map that reveals the procedures for the integration and functioning the investigated enterprises through interaction as well as in the ecosystem of the industrial park and in the general ecosystem of functioning, and the tools for providing economic functionality through economic and organizational proceedings at preventive, partner and resident phases of integration. The tools allow the innovation-oriented mechanical engineering enterprises to integrate into such territorial structures as industrial parks, this in complex will allow carrying out their purposes in the development of the real sector of the economy.

  10. Interpretation of Disruptive Innovation in the Era of Smart Cities of the Fourth Industrial Revolution

    Directory of Open Access Journals (Sweden)

    Gábor Nick

    2018-04-01

    Full Text Available The exponential development of information technology and, in this context, the latest generation of open innovation systems result in revolutionary changes in almost every industry as well as in other areas of life. From the automotive industry to the energy sector and to tourism, newcomers emerge everywhere, building on the tools of disruptive innovation, which with earlier unprecedented speeds transform their previous industry power. The essence of the smart city approach is to put the latest tools of technological advancement in serving the social, economic and ecological sustainability of cities' lives for the inhabitants as well as for the enterprises of the city. Industry 4.0 is an imagined future, which in our opinion – in direct or indirect ways – would have a fundamental influence on smart cities and their environment and regions, given that their primary goal is to improve a country's competitiveness. In our study, we review the relevant literature on the definition of and approach to innovation as well as the smart city concept in this new revolutionary age, we demonstrate relevant correlations between the concepts of disruptive innovation, smart city and Industry 4.0

  11. From maturity to value-added innovation: lessons from the pharmaceutical and agro-biotechnology industries.

    Science.gov (United States)

    Mittra, James; Tait, Joyce; Wield, David

    2011-03-01

    The pharmaceutical and agro-biotechnology industries have been confronted by dwindling product pipelines and rapid developments in life sciences, thus demanding a strategic rethink of conventional research and development. Despite offering both industries a solution to the pipeline problem, the life sciences have also brought complex regulatory challenges for firms. In this paper, we comment on the response of these industries to the life science trajectory, in the context of maturing conventional small-molecule product pipelines and routes to market. The challenges of managing transition from maturity to new high-value-added innovation models are addressed. Furthermore, we argue that regulation plays a crucial role in shaping the innovation systems of both industries, and as such, we suggest potentially useful changes to the current regulatory system. Copyright © 2010 Elsevier Ltd. All rights reserved.

  12. [Innovation in pharmaceutical and health biotechnology industries: challenges for a virtuous agenda].

    Science.gov (United States)

    Vargas, Marco; Gadelha, Carlos Augusto Grabois; Costa, Laís Silveira; Maldonado, José

    2012-12-01

    Pharmaceutical and biotechnology industries comprise a major production subsystem of the health industrial complex in Brazil. It stands out for both its economic importance and its prominent role in developing new technologies in strategic areas. Strengthening the local production of generic drugs in the last decade has significantly increased the number of Brazilian companies in the local pharmaceutical market and has been an important turning point for this industry's growth. However, there remain major structural bottlenecks both in terms of production and continuous innovation. These bottlenecks reveal the high vulnerability of the Brazilian National Health System and point to the need of public policies that promote strengthening the production base and innovation in the pharmaceutical industry and that at the same time meet health-related social demands in health in Brazil.

  13. X-ray techniques for innovation in industry

    Directory of Open Access Journals (Sweden)

    Krystyna Lawniczak-Jablonska

    2014-11-01

    Full Text Available The smart specialization declared in the European program Horizon 2020, and the increasing cooperation between research and development found in companies and researchers at universities and research institutions have created a new paradigm where many calls for proposals require participation and funding from public and private entities. This has created a unique opportunity for large-scale facilities, such as synchrotron research laboratories, to participate in and support applied research programs. Scientific staff at synchrotron facilities have developed many advanced tools that make optimal use of the characteristics of the light generated by the storage ring. These tools have been exceptionally valuable for materials characterization including X-ray absorption spectroscopy, diffraction, tomography and scattering, and have been key in solving many research and development issues. Progress in optics and detectors, as well as a large effort put into the improvement of data analysis codes, have resulted in the development of reliable and reproducible procedures for materials characterization. Research with photons has contributed to the development of a wide variety of products such as plastics, cosmetics, chemicals, building materials, packaging materials and pharma. In this review, a few examples are highlighted of successful cooperation leading to solutions of a variety of industrial technological problems which have been exploited by industry including lessons learned from the Science Link project, supported by the European Commission, as a new approach to increase the number of commercial users at large-scale research infrastructures.

  14. X-ray techniques for innovation in industry.

    Science.gov (United States)

    Lawniczak-Jablonska, Krystyna; Cutler, Jeffrey

    2014-11-01

    The smart specialization declared in the European program Horizon 2020, and the increasing cooperation between research and development found in companies and researchers at universities and research institutions have created a new paradigm where many calls for proposals require participation and funding from public and private entities. This has created a unique opportunity for large-scale facilities, such as synchrotron research laboratories, to participate in and support applied research programs. Scientific staff at synchrotron facilities have developed many advanced tools that make optimal use of the characteristics of the light generated by the storage ring. These tools have been exceptionally valuable for materials characterization including X-ray absorption spectroscopy, diffraction, tomography and scattering, and have been key in solving many research and development issues. Progress in optics and detectors, as well as a large effort put into the improvement of data analysis codes, have resulted in the development of reliable and reproducible procedures for materials characterization. Research with photons has contributed to the development of a wide variety of products such as plastics, cosmetics, chemicals, building materials, packaging materials and pharma. In this review, a few examples are highlighted of successful cooperation leading to solutions of a variety of industrial technological problems which have been exploited by industry including lessons learned from the Science Link project, supported by the European Commission, as a new approach to increase the number of commercial users at large-scale research infrastructures.

  15. Radical Innovation, Paradigm Shift and Incumbent’s Dilemma The Case of the Auto Industry

    Directory of Open Access Journals (Sweden)

    Eden Yin

    2017-04-01

    Full Text Available Radical innovations often upend the incumbents firms and even render them obsolete (Ansari & Krop, 2012; Benner, 2010, as these firms often have great difficulties in addressing the challenge posed by these innovations due to inertia (Ghemawat, 1991, tendencies to exploit existing competences (Levinthal & March, 1993; O’Reilly & Tushman, 2008, organizational rigidity (Beonard-Barton, 1992, complacency and internal culture (Tellis, 2006, problems in the incentive system and resource allocation process (Christensen, 1997, and gap in the organizational capabilities required for embracing the new technology (Henderson, 2006; Tushman & Anderson, 1986. However, as radical innovations become increasingly frequent across industries, responding to this serious threat has become a strategic priority for many incumbent firms. Research shows that incumbents survive or even prosper in the face of radical innovations by forging effective partnerships with challenger firms (Ansari & Krop, 2012, establishing a separate entity to fend off the threat (Christensen, 1997; Christensen, Raynor & McDonald, 2015, better evaluation and investment approach (Hill & Rothaermel, 2003, appropriately configuring organizational form and structure (Ansari & Krop, 2012, coupling their basic research function with applied research functions (Hill & Rothaermel, 2003, possessing downstream complementary assets critical for the commercialization of the new technology (Ansari & Krop, 2012; Hill & Rothaermel, 2003, and more importantly by possessing a high willingness to cannibalize their core business (Chandy and Tellis, 1998. Incumbents can also thrive or overcome the so-called incumbent’s curse by pioneering radical innovations by themselves (Chandy and Tellis, 2000. Previous studies on radical innovations focus primarily on a single product (e.g., Chandy and Tellis, 1998, 2000, technological or business model innovation (Ansari & Krop, 2012; Christensen, 1997; Hill

  16. Recording and Audit of Resource Saving Innovations at Modern Industrial Companies

    OpenAIRE

    I. M.

    2017-01-01

    Resource saving and energy saving are essential components of “energy security” problem in all the countries, which raises the importance of analysis and revision of approaches to organization of recording and audit of resource saving innovations at industrial companies. The article’s objective is to study organization of recording and audit of resource saving technologies at industrial companies. A review of resource saving purposes and methods is given. For accounting purposes, innovati...

  17. Analyze of Predictive Model of Innovation Management in Processing and Complementary Industries of Livestock Products

    OpenAIRE

    Ahmad Reza Ommani

    2015-01-01

    The purpose of this study was designing predictive model for innovation management in processing and complementary industries of livestock products. The method of research was correlative descriptive. The population of this research was managers in processing and complementary industries of livestock products of Khouzestan Province (N=486). By stratified random sampling, a random sample (n=125) was selected for participation in the study. A questionnaire was developed to ...

  18. Development of the innovative food industry in the conditions of ensuring food security

    OpenAIRE

    Berdiev S.

    2017-01-01

    The purpose of this article is to ensure the safety of food and through the development of innovative food industry and learning to increase the production of food. Work to ensure food security of the Republic of Uzbekistan has its own characteristics and analysis of trends and problems identified in this area. As well as ensuring the safety of food and food industry offer based on the priority directions of scientific and practical recommendations developed.

  19. Industry Perspectives on Market Access of Innovative Drugs: The Relevance for Oncology Drugs

    OpenAIRE

    Pauwels, Kim; Huys, Isabelle; Casteels, Minne; Simoens, Steven

    2016-01-01

    Key Points - Representatives of the pharmaceutical industry call for a broader recognition of value within the assessment and appraisal of innovative drugs - Focus on value within the assessment and appraisal of drugs is jeopardized by financial drives as the side of industry and at the side of the payers - A well–considered value-framework, with attention for patient reported outcomes, societal preferences and dynamic approach on the drug life cycle, needs to be incorporated in ass...

  20. First Tuesday@CERN: Industrial partnership and innovation management at European research laboratories

    CERN Multimedia

    2003-01-01

    On Wednesday 19 March, CERN will host for the second time the 'First Tuesday Geneva' events for entrepreneurs, investors and all those interested in new technologies. The event is organised by the non-profit group Rezonance. The theme of this "First Tuesday@CERN" is familiar to CERN, as it concerns new trends of industrial partnership and innovation management at European research laboratories. As major sources of innovative technologies, large laboratories such as CERN, ESA, EMBL or ESRF have adopted over the past few years new strategies in the areas of industrial partnership and technological spin-offs. Speakers include: - Pierre Brisson, Head of Technology Transfer and Promotion Office, ESA : "The European Space Incubator at ESA" - Gabor Lamm, Managing Director EMBL Enterprise Management Technology Transfer : "EMBL Enterprise Management: Innovation Works" - Edward Mitchell, Coordinator of the PSB, ESRF : "The Partnership for Structural Biology" - Wolfgang von Rüden, Leader of Information Tech...

  1. Organisational, technological and economic innovations: the nuclear industry reinvents itself to face 2030 challenges

    International Nuclear Information System (INIS)

    Faudon, Valerie; Jouette, Isabelle; Le Ngoc, Boris

    2016-06-01

    As the French nuclear industry is facing a major challenge (financial weakness, an electric power market in crisis, 15 years without building any reactor, delayed works), this report first outlines why innovation is necessary to guarantee a low carbon and competitive electricity, to comfort the leadership position of this sector in the world, and to respond to expectations of civil society. Then, it describes how the French nuclear industry is already implementing organisational, technological and social innovations, notably through the development of digital technologies. The third part identifies priorities of new public policies: to imagine a new business model for nuclear (a better visibility for investors, taking all induced costs in the power system into account in a diversified mix, reform of the carbon market, taking avoided atmospheric pollution into account), to rethink regulation in order to free innovation spirit, and to prepare the future by investing in research

  2. "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN"

    CERN Multimedia

    FI Department

    2008-01-01

    On January 29-30, 2008 On 29 and 30 January 2008, the German Federal Ministry of Education and Research (BMBF) will join forces with CERN in organizing the "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN". The Industrial Exhibition provides the opportunity for some 30 German companies to present their products and services to the scientists and buyers of CERN, establish contacts and gather information on future purchasing opportunities. The main subjects will be the following: mechanical engineering, electrical engineering, electronics, civil engineering and buildings, data processing, radiation protection and vacuum and low temperature technology. The first ever "Innovation Forum at CERN" - open to all CERN Member States – will bring together under one roof researchers, innovators, and entrepreneurs to understand and discuss CERN’s applied technology. They will learn about the know-how accumulated through the LHC, the five detectors ...

  3. "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN"

    CERN Multimedia

    FI Department

    2008-01-01

    29-30 January 2008 On 29 and 30 January 2008, the German Federal Ministry of Education and Research (BMBF) will join forces with CERN in organizing the "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN". The Industrial Exhibition will provide the opportunity for some 30 German companies to present their products and services to the scientists and buyers of CERN, establish contacts and gather information on future purchasing opportunities. The main subjects will be the following: mechanical engineering, electrical engineering, electronics, civil engineering and buildings, data processing, radiation protection and vacuum and low temperature technology. The first ever "Innovation Forum at CERN" - open to all CERN Member States - will bring together under one roof researchers, innovators, and entrepreneurs to understand and discuss CERN’s applied technology. They will learn about the know-how accumulated through the LHC, the five detectors ...

  4. Green Energy-Industrial Innovation: A Comparative Study of Green Energy Transformations in Northern Europe

    Energy Technology Data Exchange (ETDEWEB)

    Eikeland, Per Ove; Christiansen, Atle Christer; Koefoed, Anne Louise; Midttun, Atle; Tangen, Kristian

    1999-07-01

    Greening of industry is a prominent topic on the European agenda and has received a new impetus with the Kyoto process, where the European Union and its member states are facing new obligations. Due to its role as a major infrastructure sector and due to its extensive emissions, the electricity sector has become a focal industry in this context. These same factors, as well as the large public ownership has, in fact, traditionally placed energy in a central public political focus. The energy and electricity sector hence exemplify the intertwined nature of economics and politics in sector developments, where technology choices and capacity expansions have numerous motivations and diverse interests to please. This report discusses ''green'' innovation in the energy industry. By selecting some of the most advanced examples of breakthrough for new green technologies in Europe, it explores the basic elements of successful greening of industry. To account for the fact that product innovation- and diffusion-processes are embedded in a complex politico-economic setting, we have developed an analytical framework, incorporating both economic, political and societal elements and the interplay between them. More specifically, environmentally oriented innovation is seen as evolving out of the interplay between: 1) a technical-commercial core (major market agents, i.e. the renewable energy supply industry, associated complementary industries and consumers); 2) the political-administrative system; and 3) the societal basis, referring to existing societal customs, norms, and modes of social organisation. Drawing on Porter's (1990) analysis of business clusters, we have termed our focus ''green energy-industrial cluster'' emergence and growth. We have taken Porter's attempt to break out of a limited market analysis into a broader strategic focus one step further, where the political and institutional dimensions are more explicitly included. This implies that we see the emergence of

  5. Green Energy-Industrial Innovation: A Comparative Study of Green Energy Transformations in Northern Europe

    International Nuclear Information System (INIS)

    Eikeland, Per Ove; Christiansen, Atle Christer; Koefoed, Anne Louise; Midttun, Atle; Tangen, Kristian

    1999-01-01

    Greening of industry is a prominent topic on the European agenda and has received a new impetus with the Kyoto process, where the European Union and its member states are facing new obligations. Due to its role as a major infrastructure sector and due to its extensive emissions, the electricity sector has become a focal industry in this context. These same factors, as well as the large public ownership has, in fact, traditionally placed energy in a central public political focus. The energy and electricity sector hence exemplify the intertwined nature of economics and politics in sector developments, where technology choices and capacity expansions have numerous motivations and diverse interests to please. This report discusses ''green'' innovation in the energy industry. By selecting some of the most advanced examples of breakthrough for new green technologies in Europe, it explores the basic elements of successful greening of industry. To account for the fact that product innovation- and diffusion-processes are embedded in a complex politico-economic setting, we have developed an analytical framework, incorporating both economic, political and societal elements and the interplay between them. More specifically, environmentally oriented innovation is seen as evolving out of the interplay between: 1) a technical-commercial core (major market agents, i.e. the renewable energy supply industry, associated complementary industries and consumers); 2) the political-administrative system; and 3) the societal basis, referring to existing societal customs, norms, and modes of social organisation. Drawing on Porter's (1990) analysis of business clusters, we have termed our focus ''green energy-industrial cluster'' emergence and growth. We have taken Porter's attempt to break out of a limited market analysis into a broader strategic focus one step further, where the political and institutional dimensions are more explicitly included. This implies that we see the emergence of

  6. Managing innovation in regional supply networks : a Dutch case of "knowledge industry clustering"

    NARCIS (Netherlands)

    Rutten, R.P.J.H.; Batenburg, R.S.

    2003-01-01

    This paper presents a case study on the collaboration between Océ, a large Dutch manufacturer of copiers and printers, and several of its lead suppliers within the so-called "knowledge industry clustering" (KIC) project. In 1993 Océ initiated this project to enable innovation by creating

  7. INNOVATIVE AND INDUSTRIAL-PERFORMANCE IN PHARMACEUTICAL RESEARCH-AND-DEVELOPMENT, A MANAGEMENT CONTROL PERSPECTIVE

    NARCIS (Netherlands)

    OMTA, SWF; BOUTER, LM; VANENGELEN, JML

    In this paper management control is related to innovative and industrial performance in 14 non-biotech pharmaceutical companies. The study consisted of questionnaires, sent to the heads of the different research departments of European research laboratories of leading pharmaceutical companies,

  8. Public policies influencing innovation in the agrochemical, biotechnology and seed industries

    NARCIS (Netherlands)

    Bijman, J.; Tait, J.

    2002-01-01

    The development and marketing of new products by the agrochemical, biotechnology and seed industries is strongly regulated by government policies. Relevant policies include those on science, technology and innovation, the environment and public health, and farm support. This survey of policies

  9. Training of Engineering Personnel for the Innovative Coal Industry: Problems and Ways of Solution

    Science.gov (United States)

    Zaruba, Natalya; Fraltsova, Tamara; Snegireva, Tatyana

    2017-11-01

    The article is written based on some results of the long-term scientific research of the problem related to the urgent need to find the ways of training personnel for the innovative coal industry in the higher education system. This is due to the fundamental changes in the Russian social and economic conditions: the change in the social system and the owner of the coal industry, the emergence of new technologies in the field of coal mining and processing, and in the management of these processes. At the same time, the system of training specialists for the coal industry in the higher education institutions has largely remained unchanged: technologies and principles of training, scientific approaches and concepts take little account of the changed situation, traditional views of specialists work-ing in the university continue to dominate innovative ideas. Many innovations, especially related to technology and the principles of education, struggle to make their way into the higher education system. The article substantiates the urgency of the problem of training personnel for the innovative coal industry in the higher education system, as well as the importance of scientific analysis of the problem in order to find the ways to solve it.

  10. Innovation with Impact: Industry-Education Partnerships in Massachusetts. Publication #15311.

    Science.gov (United States)

    Freedman, Susan; Aschheim, Barbara

    This document describes six industry-education partnerships in Massachusetts selected as exemplary and 14 selected as outstanding. They represent innovative and collaborative ways to address dropout prevention, at-risk and special needs students, adult literacy, basic skill development, and enrichment needs of students. Each entry provides this…

  11. Institutional innovations in the forest industry in Russia: a case study of Irkutsk province

    Science.gov (United States)

    Dennis V. Dayneko; Eric J. Gustafson

    2014-01-01

    Multiple global changes are impacting Russia today. Economic transformations in Russia have prompted the establishment of new business relations, which are based on innovations in the economic, institutional and ecological spheres, including within the Forest industry. This paper focuses on the Forest sector in Irkutsk province and beyond, examining the basic problems...

  12. Engaged scholarship for designing product service system innovation opportunities in an industrial design course

    NARCIS (Netherlands)

    Lu, Y.; Baha, S.E.; Hsieh, P.H.

    2013-01-01

    This paper explores a design case study in an industrial design classroom in which actors with diverse expertise were involved for the creation of Product Service System (PSS) innovation opportunities in societal contexts. By engaging diverse experts from different fields, the classroom was turned

  13. Innovation in small and mediumsized firms in the security service industry

    DEFF Research Database (Denmark)

    Langergaard, Luise Li; Møller, Jørn Kjølseth; Hansen, Anne Vorre

    2014-01-01

    This article is a study of innovation in the security sector based on an analysis of three Danish security companies. It uncovers the logics and dynamics of innovation in the security business, which is part of the operational service sector. Operational service companies are forced to choose...... activities. In order to overcome this general ‘service squeeze’ and break with a mature market, security companies use different strategies for innovation. These strategies depend on the ability of the individual security companies to activate the innovative resources among employees in order to move...... the business activities further up in the market hierarchy of security services by offering more complex and knowledge-intensive solutions to the customers, thereby reducing price competition and increasing the profits of the business activity in the same way as known from other industries...

  14. Exploring the Relationship Between Business Model Innovation, Corporate Sustainability, and Organisational Values within the Fashion Industry

    DEFF Research Database (Denmark)

    Pedersen, Esben Rahbek Gjerdrum; Gwozdz, Wencke; Hvass, Kerli Kant

    2018-01-01

    their origin in the fundamental principles guiding the organisation. In addition, the study also finds a positive relationship between the core organisational values and financial performance. The analysis of the paper is based on survey responses from 492 managers within the Swedish fashion industry.......The objective of this paper is to examine the relationship between business model innovation, corporate sustainability, and the underlying organisational values. Moreover, the paper examines how the three dimensions correlate with corporate financial performance. It is concluded that companies...... with innovative business models are more likely to address corporate sustainability and that business model innovation and corporate sustainability alike are typically found in organisations rooted in values of flexibility and discretion. Business model innovation and corporate sustainability thus seem to have...

  15. An analysis of vendor innovation capability in the contract electronics manufacturing industry

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

    2016-01-01

    the contract, vendors can use different configurations of the competitive priorities of cost, quality, delivery and flexibility. The research aggregates the capabilities that influence the innovative capability of a vendor into the innovation-related capabilities (IRCs) of design, new product introduction......Limited academic research has been given to analysing the innovation capabilities of vendors in outsourcing contracts. This paper seeks to address this gap in the literature by enhancing our understanding of how the innovation capability of vendors is deployed to win, run and renew outsourcing...... contracts with their customers. Employing the resource-based view as a theoretical basis and undertaking in-depth case study analysis of three vendors in the electronic manufacturing services industry, the research shows that to achieve the outsourcing objectives of winning, running and renewing...

  16. The Innovation Paradigm of New Industrialization in the Conditions of the Integrated World Economic Way

    Directory of Open Access Journals (Sweden)

    Olga Aleksandrovna Romanova

    2017-03-01

    Full Text Available The article emphasizes the importance of the concept of «technical and economic paradigm», which characterizes the certain stage of the world economy development associated with the corresponding technological revolution. The paper reveals the feature of the modern technical and economic paradigm development connected with new concepts determining a priority of general values. The author states the hypothesis that in the conditions of the emergence of the fourth industrial revolution elements (so-called 4.0 industry, it is fair to consider the innovation paradigm of development as the foundation of the new industrialization which preceds this revolution. The author considers new industrialization as the process contributing to the global technological parity of Russia and the countries-technological leaders. The most significant statements from this post of view are allocated: consideration of new industrialization as a process of continuous innovations and distribution of breakthrough technologies, computerization of production, robotization, cross-disciplinary nature of high technologies, the ecology of technologies, intellectualization of the potential of all persons occupied in industrial production, etc. The author analyses strategic documents connected with the development of innovative activities in Russia. The paper emphasizes that the indicators characterizing these activities do not allow to rank Russia as a country having the developed innovative economy. The article reveals the possibilities of the activation of innovative activities in Russia connected to the development of the approved private priorities in the main spheres of activity with the state priorities of social development; with construction of integrated strategy of a scientific and technological, institutional and industrial development of the country; with creation of the system of scientific monitoring allowing to adjust the necessary corrective actions in time. The

  17. KEY TENDENCIES IN SCIENTIFIC AND TECHNICAL (INNOVATIVE ACTIVITIES OF RUSSIAN INDUSTRIAL COMPANIES

    Directory of Open Access Journals (Sweden)

    K. B. Dobrova

    2015-01-01

    Full Text Available The article off ers the analysis of expenditures on technological innovation in Russia and abroad. The author outlines the main reasons of the low level of technological development of Russian industrial companies. A number of organizational and economic measures to create conditions for technological development of the Russian economy are considered. In recent years, there was an essential increase in output of innovative products, works and services that coincided with the increased ratio of volumes of technological innovations to their costs. However, the expected decrease of this ratio in the coming years may cause slower growth of volumes of innovative production that requires drastic measures, especially aimed at restricting key factors impeding innovative activities. These factors include lack of own funds, high cost of innovations, lack of fi nancial support from the state, high economic risk and low innovative potential of the organization.

  18. Re-thinking Innovation in Organizations in the Industry 4.0 Scenario: New Challenges in a Primary Prevention Perspective.

    Science.gov (United States)

    Palazzeschi, Letizia; Bucci, Ornella; Di Fabio, Annamaria

    2018-01-01

    In organizations, innovation is considered a relevant aspect of success and long-term survival. Organizations recognize that innovation contributes to creating competitive advantages in a more competitive, challenging and changing labor market. The present contribution addresses innovation in organizations in the scenario of Industry 4.0, including technological innovation and psychological innovation. Innovation is a core concept in this framework to face the challenge of globalized and fluid labor market in the 21st century. Reviewing the definition of innovation, the article focuses on innovative work behaviors and the relative measures. This perspective article also suggests new directions in a primary prevention perspective for future research and intervention relative to innovation and innovative work behaviors in the organizational context.

  19. Innovation

    Science.gov (United States)

    EPA frames innovation as critical to the protection of human health and the environment through initiatives such as sustainable practices, innovative research, prize competitions, innovation awards, partnerships, and community activities.

  20. The Eco-Innovation Variables which Influence the Performance of Creative Industries Center of Natural Stone Crafts

    Directory of Open Access Journals (Sweden)

    Murti Astuti

    2018-01-01

    Full Text Available This study investigates the eco-innovation variable which has the significant effecton creative industries center’s performance of marble and natural stone craft sector in Tulungagung, Indonesia. The object of the study is the creative industries center with the non-renewable raw material. Mostly, the companies are in form of small and medium-sized enterprises (SMEs which is ‘passive eco-innovator’ and their eco-innovation variables have not been investigated before in terms of their influenceon their performance. The respondents were 81 craftsmen taken from the population. The data were collected through questionnaires which were tested, processed and analyzed by using Consistent Partial Least Square (PLSc. The eco-innovation variables which significantly effecton innovative performance are eco-organizational innovation and eco-product innovation. Eco-process innovation and eco-marketing innovation don’t directly affecton innovative performance, but its significant effecton eco-product innovation may influence innovative performance. Improving innovative performance will impact on financial performance through improvement of production performance, but market performance does not significantly affect financial performance. The findings of this study could be a reference for creative industries center’s of marble and natural stone craft sector to prioritize which type of eco-innovation should be improved so that its impact on performance is more significant

  1. The development of China's medical biotech industry needs to be driven by innovation.

    Science.gov (United States)

    Yu, Zailin; Dai, Yuehan

    2006-11-01

    The Chinese biotech industry is going through a period of fast growth, and with its huge population, China is predicted to be the biggest single-country market in the world. However, the Chinese biotech industry has to tackle the critical issue of innovation, which should be the driving force for China's development into an advanced and responsible country. Here, in this article, the authors review the history of the Chinese biotech industry, exemplified by the development of genetically engineered drugs during the last 20 years, and also point out its the future.

  2. The CSIR’s work in infrastructure innovation as an enabler for industrial development

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2017-10-01

    Full Text Available % 26% 2% 22% 37% 0% 5% CIDB 2017. Contractor skills survey 2011. Pretoria: Construction Industry Development Board 8 “Modernise or die” • “A plan for change needs to recognise, based on past evidence, that the industry will not change itself... stream_source_info The CSIR?s work in infrastructure innovation as an enabler for industrial development.pdf.txt stream_content_type text/plain stream_size 5661 Content-Encoding UTF-8 stream_name The CSIR?s work in infrastructure...

  3. Social Innovation and New Industrial Contexts: Can Designers "Industrialize" Socially Responsible Solutions?

    DEFF Research Database (Denmark)

    Morelli, Nicola

    2007-01-01

    framework for this paper. An investigation is proposed beyond the traditional links between design and industry, emphasising new insights into the changes in the social role of industrial production. Furthermore, the paper proposes a methodological exploration to help designers focus on new actors and new...... perspectives in search for possible convergences between the logic of socially responsible design and the contribution of the industrial culture....

  4. Introduction to innovation in the East Asian automotive industry : Exploring the interplay between product architectures, firm strategies, and national innovation systems

    NARCIS (Netherlands)

    Bartnik, Roman; Wilhelm, Miriam; Fujimoto, Takahiro

    2018-01-01

    East Asia is the origin and target market for an increasing number of technological innovations. We use the East Asian automotive industry as a focal point to discuss central questions of innovation research such as modularity, product architecture, and the dynamics of state sponsorship in national

  5. The influence of knowledge flow on sustainable innovation in a project-based industry : From demonstration to limited adoption of eco-innovations

    NARCIS (Netherlands)

    Bossink, Bart

    2018-01-01

    The effect of the flow of knowledge on sustainable innovation in project-based firms in project-based industries is the subject of in-depth research in this paper. It studies the simultaneous functioning and effects of knowledge flow mechanisms on sustainable innovation in project-based firms in

  6. Comparing open innovation of innovative food SMEs with SMEs in the seed and high- tech industries - an analysis of 15 SMEs in the Netherlands

    NARCIS (Netherlands)

    Omta, Onno; Fortuin, Frances; Dijkman, Niels

    2018-01-01

    Various studies have shown that open innovation (OI) has become a basic requirement for the long-term survival of high-tech companies. However, also in an artisanal sector like the food industry OI has become increasingly important. To discover the extent to which innovative food and seed

  7. Biopharmaceutical innovation and industrial developments in South Korea, Singapore and Taiwan.

    Science.gov (United States)

    Hsieh, Chee-Ruey; Löfgren, Hans

    2009-05-01

    South Korea, Singapore and Taiwan are well known as export-oriented developmental states which for decades employed industrial policy to target particular industries for government support. In the past fifteen years, these three countries all identified the biopharmaceutical industry as a strategic sector. This article explores, through economic analysis, the rationale for this decision and the strategies chosen for linking into the global bio-economy with the objective of catching up in biopharmaceuticals. The paper identifies three comparative advantages enjoyed by these countries in the biopharma sector: (1) public investments in basic research; (2) private investments in phase 1 clinical trials; and (3) a potentially significant contract research industry managing latter-stage clinical trials. Governments employ a range of industrial policies, consistent with these comparative advantages, to promote the biopharmaceutical industry, including public investment in biomedical hubs, research funding and research and development (R&D) tax credits. We argue that the most important feature of the biopharmaceutical industry in these countries is the dominant role of the public sector. That these countries have made progress in innovative capabilities is illustrated by input measures such as R&D expenditure as share of gross domestic product, number of patents granted and clinical trials, and volume of foreign direct investment. In contrast, output indicators such as approval of new chemical entities suggest that the process of catching up has only just commenced. Pharmaceutical innovation is at the stage of mainly generating inputs to integrated processes controlled by the globally incumbent firms.

  8. INNOVATION IN THE CREATIVE INDUSTRIES – CASE STUDY OF AN EVENT PLANNING COMPANY

    Directory of Open Access Journals (Sweden)

    Filculescu Adina

    2013-07-01

    Full Text Available Creative industries have recently gained attention from economists and policy makers as they are said to contribute in a significant way to the economic and technological development of knowledge societies. In Romania there has not been too much talk about the way in which these industries are inserted in the larger chain of industrial innovation, nor about the particularities of their innovation processes which could provide interesting insights for the more traditional industries that are in need of a creativity boost. This paper seeks to fill this gap by offering a process view of business innovation in an event management company, which we argue has many of the characteristics encountered in organizations belonging to creative industries. Through an in-depth case study based on diary entries and interviews we uncover the way in which innovation is understood in this service sector and how this understanding is translated into repeatable business processes. Based on the review of the literature concerned with innovativeness in creative industries we have decided upon four important research themes: people, products, places and policies. By people we refer, first of all, to the entrepreneur who was asked to reflexively answer questions related to passions/interests, formal and non-formal knowledge and social capital in order to assess the entrepreneurial capacity. Also included in this category are the clients of the company and the employees, which represent major players in the innovation process during different stages. Places are important because they are used in the definition of innovation: something new to someone somewhere, and also because they are regarded as a source of inspiration and a possible hindrance in the implementation of the desired event design. Products encompass the raw materials that are used in creating the flower arrangements and the general room décor as well as the technologies that stand behind them, while

  9. Impact of Employment Agglomeration on Patented Innovation in U.S. Manufacturing Industries from 1986 to 2008

    Directory of Open Access Journals (Sweden)

    Abdullah M. Khan

    2014-10-01

    Full Text Available This paper examines impact of employment agglomeration in fifteen U.S. manufacturing industries on their innovation activities measured by patent count. A count data model is employed in regressing patent count on employment agglomeration measures, measure of scale, and some control variables. Measures of employment agglomeration and market concentration are found to have negative impacts on innovation in U.S. manufacturing industries. Two agglomeration proxies -Gini index and Ellison-Glaeser index have a negative influence on U.S. patented innovation for the study period. This result implies that the external benefit of spatial agglomeration of similar firms has waned down. The impact of market concentration is also found to be a negative factor for innovation. This result implies that firms with larger plant size are less innovative than those with smaller plant size. Impact of ‘share of workers with post graduate degrees’ on innovation was found to be a positive but statistically not significant factor for innovation. The ‘goods pooling’ determinant displayed negative influence on innovation. These results are mostly consistent across fifteen manufacturing subsectors. Rising energy cost is found to be one of the most significant deterrents of innovation whereas, ethnic diversity is found to be a significant facilitator of it. Results of this research lend support in favor of regional economic development policies that promote coagglomeration of various interdependent and complementary industries and small scale industries, and supports ethnic diversity to spur innovation in U.S. manufacturing industries.

  10. Public Innovation Policy in the Pharmaceutical Industry: the Cases of the EU and USA

    Directory of Open Access Journals (Sweden)

    Z. A. Mamedyarov

    2017-01-01

    Full Text Available Purpose: the main purpose of this article was to study the modern tools of the public innovation policy in the global pharmaceutical industry (US and EU cases, which is one of the most knowledge-intensive sectors of the global economy. During the study, it was necessary to achieve the following objectives: to identify main components of the innovation policy in the sector, to consider the role of intellectual property protection, measures of innovation support, regulatory control and other factors, and, also, to identify comparative characteristics of innovation processes within the US and the EU pharmaceutical sector. Methods: this article is based on a qualitative comparative study of the US and EU innovation policy in the pharmaceutical industry. Industryoriented innovation support measures (i.e. levels of private and public financing have been quantitatively analyzed, including the evaluation of the levels of R&D productivity; also, a comparative study of the pharma patent statistics in the leading countries have been performed. This article highlights the problems of intellectual property protection, which remains an important source of financial stability for major pharma companies being the basis for new innovation agenda. Low R&D productivity and high costs of new innovative drugs together emphasize the significance of the analysis of current innovation processes within the pharmaceutical industry, and could open the way for building more effective managerial and business processes. Results: the global pharmaceutical industry today is under thorough control of government regulators and civil society organizations seeking to improve mechanisms of the drugs distribution, in order to make drugs more accessible, safe and clean. This high regulation level impedes innovation within existing pharma business models, and leads to high costs of the newest drugs. The study revealed that successful pharmaceutical innovation today requires

  11. Behind the development of technology: The transition of innovation modes in China’s wind turbine manufacturing industry

    International Nuclear Information System (INIS)

    Ru Peng; Zhi Qiang; Zhang Fang; Zhong Xiaotian; Li Jianqiang; Su Jun

    2012-01-01

    The market scale of China’s wind turbine manufacturing industry has grown immensely. Despite China still having a limited capacity in terms of technology innovation, the institutional support has promoted the technology capability development of the wind turbine manufacturing industry. This paper explores the driving forces underlying this development by reviewing the transition of the innovation modes and the dynamic interactions among the technology capability, innovation modes, market formation, and wind energy policy. The innovation mode in China began with imitative innovation, then transitioned to cooperative innovation, and has more recently set its sights on attaining truly indigenous innovation. Public policy serves as a key driving force for the evolution of innovation modes, as well as the development of the market. The policy focus has evolved in the following sequence: 1. building the foundation for technological innovation; 2. encouraging technology transfer; 3. enhancing local R and D and manufacturing capabilities; 4. enlarging the domestic market; and 5. cultivating an open environment for global competition and sustainable market development in China. - Highlights: ► New data were provided for China’s wind turbine manufacturing industry. ► The transition of innovation modes in the industry is reviewed. ► The interaction among the technology, market, policy, and innovation mode is explored. ► Public policies are the key driving forces for the transition.

  12. Implementation of Responsible Research and Innovation (RRI Practices in Industry: Providing the Right Incentives

    Directory of Open Access Journals (Sweden)

    Agata Gurzawska

    2017-09-01

    Full Text Available Abstract: Responsible Research and Innovation (RRI is a term used by policy-makers and academics to refer to research and innovation that is ethically acceptable and socially desirable. Despite the fact that the vast majority of research and innovation (R&I is funded and produced by industry, companies tend to have no awareness or recognition of this concept. This is unfortunate, as the RRI paradigm could be mutually beneficial for both business and society: it could help businesses realise competitive opportunities while also leading to positive economic, societal and environmental impacts. This paper investigates how industry can be incentivised to engage in research and innovation following the approach of RRI. We propose a matrix of incentives for stimulating the adoption of RRI. We categorise incentives according to three dichotomies: external and internal, instrumental and non-instrumental, direct and indirect. The incentives are formalised in a causal loop diagram, which can be used to demonstrate the sound character of investing in RRI from a business perspective. We discuss examples of incentives, including corporate reputation and critical consumerism, certification, employee engagement, and governance. Lastly, to ensure effective implementation of RRI, we outline factors for the realisation of successful incentives for RRI in industry.

  13. ANALYSIS OF THE EXTERNAL FACTORS OF INFLUENCE ON INNOVATION ACTIVITY OF AN INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    I. A. Salikov

    2014-01-01

    Full Text Available Summary. For successful functioning and development of the enterprise is a need to strive as possible deeper and more dynamic influence on parameters and objects OK-environmental management, primarily due to increase their innovation activity. Innovative activity of enterprises influenced by many factors. They can be classified on the factors of direct influence (micro and factors of indirect impacts (macro. Factors of direct impact of the influence on the pace and scale of development of the enterprise, on its effectiveness, because the whole spectrum of these factors acts as a limiter. Macro factors create the General conditions of existence of the enterprise in the external environment. To analyses these factors approach was used to SNW-analysis. As a result of analysis, factors of micro and macro-were classified on: stimulating, it minesweepers and dissuasive. Also studied were the degree of influence of these factors on the innovative activity of the enterprise. Reviewed rating factors hindering the development of innovation activity of industrial enterprise in Russia. In the result of which identified factors that hinder the development of innovative activity, and justified in the direction of overcoming them. It should be noted that the distinction between enabling and constraining factors is rather thin and conditional. So, the factors initially restraining innovation, at a certain point can be transformed into a stimulus for its development. Accounting for these factors, creation of necessary conditions and introduction of innovations in various aspects of the functioning of industrial enterprises will allow them to provide competitor-term benefits and sustainable development in a rapidly changing environment and the external environment.

  14. Discovery of innovative therapeutics: today's realities and tomorrow's vision. 1. Criticisms faced by the pharmaceutical industry.

    Science.gov (United States)

    Abou-Gharbia, Magid; Childers, Wayne E

    2013-07-25

    The pharmaceutical industry is facing enormous challenges, including reduced efficiency, declining innovation, key patent expirations, fierce price competition from generics, high regulatory hurdles, and a tarnished image. There is a clear need for change in the paradigms designed to address these challenges. Pharma has responded by embarking on a range of initiatives. However, along the way the industry has accrued critics whose accusations have tainted its reputation. The first part of this two-part series will discuss the criticisms that have been leveled at the pharmaceutical industry and summarize the supporting data for and against these criticisms. The second installment will focus on the current challenges facing the pharmaceutical industry and Pharma's responses to address these challenges. It will describe the industry's changing perspective and new business models for coping with the recent loss of talent and declining clinical pipelines as well as present some examples of recent drug discovery successes.

  15. The use of value stream mapping to introduction of organizational innovation in industry

    Directory of Open Access Journals (Sweden)

    R. Wolniak

    2014-10-01

    Full Text Available Organizational innovation is an important activity affecting the productivity of the organization. This paper presents a method of lean management – the method of value stream mapping. On the basis of the literature we shows the main features of the method. For example, a sample of industrial companies is an example of applying this method in the field of organizational innovation. This paper presents the current state map and a map of the future by focusing on the effects of the method.

  16. Open Innovation at the Root of Entrepreneurial Strategy: A Case from the Norwegian Oil Industry

    Directory of Open Access Journals (Sweden)

    Tatiana Iakovleva

    2013-04-01

    Full Text Available This article aims to extend the discussion about entrepreneurial strategies of small and medium-sized enterprises (SMEs by including the concept of open innovation. How can SMEs overcome the challenges of resource scarcity and harsh competition? How they can gain competitive advantage in today’s ever-changing business environment? The answer to both of these questions might be through open innovation: collaborating with researchers, customers, suppliers – even competitors – as well as research institutions and universities. A common barrier to open innovation in an SME is the perception that it will be too time consuming to gain access to a knowledge base of external knowledge providers and link to “gatekeepers” of knowledge. However, an entrepreneurial mindset might help SMEs to move toward an open-innovation approach, where more codified and transferrable knowledge are important. This article discusses the implications of an entrepreneurial focus for open-innovation activities. The usefulness of the open-innovation principles are highlighted through a case study of an Norwegian SME operating in the maritime-oil industry.

  17. Windows of opportunities and technological innovation in the Brazilian pharmaceutical industry.

    Science.gov (United States)

    Tigre, Paulo Bastos; Nascimento, Caio Victor Machado França do; Costa, Laís Silveira

    2016-11-03

    The Brazilian pharmaceutical industry is heavily dependent on external sources of inputs, capital, and technology. However, the emergence of technological opportunities and the development of biotechnology and the decline of the patent boom and resulting advances by generic drugs have opened windows of opportunities for the local industry. The article examines the Brazilian industry's innovative behavior vis-à-vis these opportunities, showing that although the industry as a whole invests little in innovation, a few large Brazilian companies have expanded their market share and stepped up their investments in research and development, supported by public policies for innovation. Resumo: A indústria farmacêutica brasileira caracteriza-se pela grande dependência de fontes externas de insumos, capital e tecnologia. O surgimento de oportunidades tecnológicas, associadas ao desenvolvimento da biotecnologia e ao fim do boom das patentes com o consequente avanço dos medicamentos genéricos, entretanto, vem abrindo janelas de oportunidades para a indústria local. Este artigo examina o comportamento inovador da indústria brasileira à luz dessas oportunidades, revelando que, embora o conjunto da indústria mantenha baixos níveis de investimentos em inovação, um pequeno grupo de grandes empresas nacionais vem ampliando sua participação no mercado e intensificando seus investimentos em pesquisa e desenvolvimento, apoiados por políticas públicas de inovação.

  18. Learning Networks in Innovation Systems at Sector / Regional Level in Argentina: Winery and Dairy Industries

    Directory of Open Access Journals (Sweden)

    Guillermo Sanchez

    2011-11-01

    Full Text Available This work studies how the set of relationships that gives place to the learning processes is established in the food industry in Argentina. A theoretical ad hoc approach is adopted, conjugating the concepts of innovation systems at sector / regional level with some context considerations like the innovative behaviour of the global and local food industry and a description of the public and private S&T in Argentina. The study is focused in two cases: the wine industry, at the Mendoza province, and the dairy products industry at the centre of the Santa Fe province, both in Argentina. While the winery industry at the province of Mendoza exports differentiated products the dairy industry, at the central basin of the province of Santa Fe, exports commodities leaving differentiated (functional products for the domestic market. These facts determine different dynamics between them, despite of what the established set of relationships is very complex and knowledge intensive in both cases. Also, in both cases the preponderant contribution of the public institutions of science and technology as knowledge and technology source is flagged.

  19. Networks of innovation or networks of opportunity? The making of the Spanish antibiotics industry.

    Science.gov (United States)

    Puig, Nuria

    2004-07-01

    The pharmaceutical industry is a typically research-intensive, first world-industry. This article seeks to explain why it has been so difficult for late industrialised nations to reproduce the networks of innovation on which the design and manufacturing of new drugs has historically based, and why alternative concepts are needed in order to understand the dynamics of science-based industries in emerging countries. The article analyses the development of the Spanish antibiotics industry, build after the World War II under the strong influence of the new international order and Spain's political framework, academic traditions and business groups. Focusing on the long-term relationships established between two Spanish companies (Antibióticos SA and Compañía Española de Penicilina y Antibióticos, CEPA), their American technological partners (Schenley and Merck), and their social and scientific environment, the article identifies networks of opportunity as the key institutional arrangement of this new industry in Spain. Opportunity (as opposed to innovation) networks are thus proposed to conceptualise the development of technologically complex industries in the European periphery.

  20. INNOVATIVE WAYS OF THE DEVELOPMENT OF THE OIL-FAT INDUSTRY

    Directory of Open Access Journals (Sweden)

    Onyshchenko Oksana

    2018-03-01

    Full Text Available Introduction. The article describes the state of agriculture and outlines the most influential branches which need economic development. It was investigated that important reference point is the access to new international markets, updating the material and technical base and the introduction of new technologies into production at the present stage for the economic development of consumer-oriented industries. Oil-fat industry is the most competitive among other branches of agriculture, therefore, it needs development, innovative ways of solving problems and introduction of the latest technologies. The purpose of the paper is to offer innovative ways of developing the oil-fat industry. Results. In order to introduce non-waste production in the industry, it has been proposed to identify a series of interdependent principles and identify strategic directions for the development of oil products production. Based on the method of structural adjustment in the direction of waste production, a conceptual model of the organizational and economic mechanism of non-waste production at the enterprises of oil and fat specialization has been constructed. Conclusions. Waste and production of organic oils are positive levers and directions in the development and modernization of the oil and fat industry. The introduction of such a mechanism will enable the oil and fat industry to expand its production by creating other types of products as a result of the use of oilseed production, and also increase its level of development thus creating more competition in international markets.

  1. The Adoption of Ergonomic Innovations for Injury Prevention : Examples from the building construction and health care industries

    OpenAIRE

    Glimskär, Bo

    2014-01-01

    A good work environment is important for the individual, for industry and for society. The work environment research has, predominantly, targeted identification of problems and the measurement of the size of these problems. Innovations to reduce the incidence of musculoskeletal disorder, MSD, have been introduced in different branches of industry, but with limited success. Few of the ergonomic innovations developed for the building and construction industry have reached a sufficient level of ...

  2. Analysing innovation policy indicators through a functional approach: the aeronautic industry case

    Energy Technology Data Exchange (ETDEWEB)

    Haddad, C.R.; Uriona Maldonado, M.

    2016-07-01

    Developing countries face different problems than developed countries and the use of the same indicator to evaluate and compare both regions can lead to misleading conclusions. Traditional indicators, such as R&D and patents may not capture the whole dynamic of a system, as they are used to compare systems focusing on its current structure. Many authors have been discussing the processes underlying industry transformation, innovation, and economic growth to access a system performance, i.e. the functions of innovation systems. Therefore, the purpose of this paper is to analyze these functions as indicators to measure the performance of the system in order to identify policy issues. In order to do that, we analyze the case of the aeronautic sectoral system of innovation of a region in Brazil. The functional approach helped us to better capture the dynamic of the system, by not restricting our analysis to the system’s structure. (Author)

  3. News-Industry Responses to Innovation Stimulus: voices from the Danish periphery

    DEFF Research Database (Denmark)

    Kammer, Aske

    2017-01-01

    in the applicants’ discursive presentation of their own innovation. Methodologically, the paper applies content analysis to identify quantitative patterns in (qualitative) readings of the applications, aiming at mapping how the actors affected by the legislation react to it and what the passing of the legislation......When the Danish Parliament revised the media-subsidy framework in 2013/2014, one of the new initiatives was the introduction of a pool of funding earmarked to establishing and developing new news media – the so-called “innovation fund”. So, as the news industry struggles to keep journalism a viable...... and economically sustainable activity, the institutionalization of financial support for media innovation constitute one way for policy makers to bring (parts of) the journalistic environment up-to-date with the digital age, thereby improving the conditions for an informed citizenry in the future (Kammer, 2017...

  4. Harvesting Adaptation to Biodiversity Conservation in Sawmill Industry: Technology Innovation and Monitoring Program

    Directory of Open Access Journals (Sweden)

    Guillermo J. Martínez Pastur

    2007-09-01

    Full Text Available Social demands related to native forest ecosystems are based on an efficient management, with a balance between conservation and timber production. This paper describes the industry adaptation to a biodiversity program with an alternative regeneration method. The proposed method leaves 30% of the timber-quality forest as aggregated retention and 15 m² ha-1 basal area as dispersed retention. While many costs increased considerably, the incomes also may increase by applying new management strategies and technology innovation. A monitoring program was established in the harvested stands to evaluate the ecological functionality of the applied regeneration system (forest structure, climate change, regeneration dynamics, habitat quality and abiotic cycles. The implementation of an innovated technology and monitoring program in the forest and industry determined a balance between economic values and biodiversity conservation.

  5. Innovative regions and industrial clusters in hydrogen and fuel cell technology

    DEFF Research Database (Denmark)

    Madsen, Anne Nygaard; Andersen, Per Dannemand

    2010-01-01

    Regional governments in Europe seem to be playing an increasing role in hydrogen and fuel cell (H2FC) development. A number of regions are supporting demonstration projects and building networks among regional stakeholders to strengthen their engagement in H2FC technology. In this article, we...... will analyse regions that are highly engaged in H2FC activity, based on three indicators: existing hydrogen infrastructure and production sites, general innovativeness and the presence of industrial clusters with relevance for H2FC. Our finding is that regions with high activity in H2FC development are also...... innovative regions in general. Moreover, the article highlights some industrial clusters that create favourable conditions for regions to take part in H2FC development. Existing hydrogen infrastructure, however, seems to play only a minor role in a region’s engagement. The article concludes that, while...

  6. Market dynamics, innovation, and transition in China's solar photovoltaic (PV) industry

    DEFF Research Database (Denmark)

    Zou, Hongyang; Du, Huibin; Ren, Jingzheng

    2017-01-01

    development from the perspective of technological innovation. By incorporating a Technological Innovation System (TIS) approach, the analysis performed here complements the previous literature, which has not provided agrounded itself in a theoretical framework for associated analyses. In addition......China’s photovoltaic (PV) industry has undergone dramatic development in recent years and is now the global market leader in terms of newly added capacity. However, market diffusion and adoption in China is not ideal. This paper examines the blocking and inducement mechanisms of China’s PV industry......, to determine the current market dynamics, we closely examine the market concentration trends as well as the vertical and horizontal integration of upstream and downstream actors and calculate the market concentration of the upstream and downstream integration (74.8% and 36.3%). The results of applying the TIS...

  7. Choice of Innovative Technologies as a Factor of Modernization of the Industrial Plants

    Directory of Open Access Journals (Sweden)

    Evgheniya A. Panfilova

    2015-01-01

    Full Text Available The article analyzes the need to develop a new type of interaction between providers of the equipment and its end-users in a changing social and cultural reality. This type of interaction is a guarantee of innovative modernization of Russian industrial facilities, as it is based on a revision of the social reality in light of new information and/or knowledge. The choice of innovative technologies that contribute to fruitful and qualitative relationships among the actors of the social process acquires significance since there have been changes in the role, objectives and potential of technology. The author focuses on the changes in perceptions of social time and space, reflection of consumers (the impact of economic, social and psychological factors on their decision to purchase, and suppliers. There is a reflection of the habitus of social actors in the context of social interaction, based on the organization of innovative practices. Today technology is also reflecting, its symbolic characteristics, contained in the codes of signification, become more important, than technical ones. The research is based on in-depth interviews with experts from the pharmaceutical industry aimed at identifying the factors influencing the decision to purchase an innovative high-quality imported equipments and machinery, which would contribute to the modernization of the existing production process. The author concludes that adequate reflection which promotes the creation and dissemination of new social practices based on close and confidential contacts and development of flexible communication tools would provide for successful modernization of Russia.

  8. A MULTI-OBJECTIVE APPROACH TO THE EVALUATION OF INNOVATIVE POTENTIAL OF THE TOURISM INDUSTRY ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    Tat’yana Pavlovna Levchenko

    2018-02-01

    Full Text Available Speaking about innovation in the tourism industry and hotel business, in particular, it usually means events of a systemic nature, with quality novelty, aimed at achieving positive changes, stable functioning and dynamic development. Along with general economic factors that determine the uneven demand for services of hospitality, it is explained by the sharp increase in dependence of their tourism and recreational opportunities from innovative potential (IP, capability of adapting to challenging competitive environment. The article considers a multi-objective approach to the study of the innovative potential of the tourism industry organizations. Its essence lies in the fact that the choice of the structural elements from the point of view of their value and importance (in any combination cannot be established a priori, without sufficient objective analysis on some of the more important criteria for achieving the goals. A diagnostic analysis and evaluation of the innovation potential of several hotel organizations from the standpoint of a multi-purpose approach is performed.

  9. Innovative regions and industrial clusters in hydrogen and fuel cell technology

    International Nuclear Information System (INIS)

    Madsen, Anne Nygaard; Andersen, Per Dannemand

    2010-01-01

    Regional governments in Europe seem to be playing an increasing role in hydrogen and fuel cell (H2FC) development. A number of regions are supporting demonstration projects and building networks among regional stakeholders to strengthen their engagement in H2FC technology. In this article, we will analyse regions that are highly engaged in H2FC activity, based on three indicators: existing hydrogen infrastructure and production sites, general innovativeness and the presence of industrial clusters with relevance for H2FC. Our finding is that regions with high activity in H2FC development are also innovative regions in general. Moreover, the article highlights some industrial clusters that create favourable conditions for regions to take part in H2FC development. Existing hydrogen infrastructure, however, seems to play only a minor role in a region's engagement. The article concludes that, while further research is needed before qualified policy implications can be drawn, an overall well-functioning regional innovation system is important in the formative phase of an H2FC innovation system.

  10. A Proposed Model for Measuring Performance of the University-Industry Collaboration in Open Innovation

    Directory of Open Access Journals (Sweden)

    Anca Draghici

    2017-06-01

    Full Text Available The paper aims to present a scientific approach to the creation, testing and validation of a model for performance measurement for university-industry collaboration (UIC. The main idea of the design process is to capitalize on existing success factors, facilitators and opportunities (motivation factors, knowledge transfer channels and identified benefits and to diminish or avoid potential threats and barriers that might interfere with such collaborations. The main purpose of the applied methodology is to identify solutions and measures to overcome the disadvantages, conflicts or risk issues and to facilitate the open innovation of industrial companies and universities. The methodology adopted was differentiated by two perspectives: (1 a business model reflecting the university perspective along with an inventory of key performance indicators (KPIs; (2 a performance measurement model (including performance criteria and indicators and an associated methodology (assimilated to an audit that could help companies increase collaboration with universities in the context of open innovation. In addition, in order to operationalize the proposed model (facilitating practical implementation, an Excel tool has been created to help identifying potential sources of innovation. The main contributions of the research concern the expansion of UICs knowledge to enhance open innovation and to define an effective performance measurement model and instrument (tested and validated by a case study for companies.

  11. Exploring How Peer Communities Enable Lead User Innovations to Become Standard Equipment in the Industry

    DEFF Research Database (Denmark)

    Hienerth, Christoph; Lettl, Christopher

    2011-01-01

    Literature on new product development indicates that on average around 40% of new products fail across different industries (e.g., Crawford, ; Crawford and Di Benedetto, ). Out of those that survive only few become widely accepted standard equipment in the industry (Utterback, ). Literature...... they are developed. It is therefore the aim of this study to shed light on how innovations become widely accepted by large segments of the market and specifically which demand-side forces are at work. An approach suitable for pursuing this objective is to focus on those individuals who are on the leading edge...... with respect to an important market trend (lead users) and their respective peer communities. As little knowledge is available, an explorative case study design is applied, working with cases from two different industries, specifically the medical equipment and sporting equipment industry. A longitudinal...

  12. New strategies for innovation in global health: a pharmaceutical industry perspective.

    Science.gov (United States)

    Witty, Andrew

    2011-01-01

    Diseases that disproportionately affect developing countries play a large role in stalling economic and social development. Pharmaceutical companies are driving crucial research into new vaccines and medicines; however, although there is an imperative for industry to research new therapies for diseases of the poor, the financial returns are often seen as limited. This is beginning to change. The pharmaceutical industry and the public sector are thinking differently than before about how to improve access to medicines and advance research and development for neglected diseases. The public and private sectors must work together to develop a wide range of innovative tools, partnerships, and approaches.

  13. INNOVATIVE MODELS OF EDUCATION AND TRAINING OF SKILLED PERSONNEL FOR HIGH TECH INDUSTRIES IN UKRAINE

    Directory of Open Access Journals (Sweden)

    M.Shyshkina

    2013-03-01

    Full Text Available The problems of development of innovative learning environment of continuous education and training of skilled personnel for high-tech industry are described. Aspects of organization of ICT based learning environment of vocational and technical school on the basis of cloud computing and outsourcing are revealed. The three-stage conceptual model for perspective education and training of workers for high-tech industries is proposed. The model of cloud-based solution for design of learning environment for vocational education and training of skilled workers is introduced.

  14. [Innovation guidelines and strategies for pharmaceutical engineering of Chinese medicine and their industrial translation].

    Science.gov (United States)

    Cheng, Yi-Yu; Qu, Hai-Bin; Zhang, Bo-Li

    2013-01-01

    This paper briefly analyzes the bottlenecks and major technical requirements for pharmaceutical industry of Chinese medicine, providing current status of pharmaceutical engineering of Chinese medicine. The innovation directions and strategies of the pharmaceutical engineering for manufacturing Chinese medicine are proposed along with the framework of their core technology. As a consequence, the development of the third-generation pharmaceutical technology for Chinese medicine, featured as "precision, digital and intelligent", is recommended. The prospects of the pharmaceutical technology are also forecasted.

  15. Model Keterkaitan Market Orientation, Leadership, Organizational Innovation dan Organizational Performance pada Industri Kerajinan di Sumatera Barat

    OpenAIRE

    PRIMA LITA, RATNI; MEUTHIA, MEUTHIA; FAISAL, RANNY FITRIANA

    2018-01-01

    The purpose of this study is to analyze the influence of market orientation, leadership, organizational innovation and organizational performance in handycraft industry in Bukittinggi City, Pariaman City, Padang Pariaman Regency, and Pesisir Selatan Regency. This research uses quantitative methods, while the sampling technique using Purposive sampling with sample size of 86 craft companies. The criteria assigned to the respondent is the handycraft business that produce and market their own pr...

  16. The Influencing Factors, Regional Difference and Temporal Variation of Industrial Technology Innovation: Evidence with the FOA-GRNN Model

    Directory of Open Access Journals (Sweden)

    Yongli Zhang

    2018-01-01

    Full Text Available Technology innovation is a motivating force for sustainable development. The recognition and measurement of influencing factors are a basic prerequisite of technology innovation research. In response to the gaps and shortages of existing theories and methods, this paper builds the impact indicators of technology innovation, the proposed FOA-GRNN model, and analyzes the influencing factors, regional differences and temporal variations of technology innovation based on industrial above-scale enterprises of 31 provinces in China from 2008 to 2015. The empirical results show that innovation investment is a determinant of technology innovation in China, and is more and more significant; meanwhile a wide gap of innovation resource between Eastern China and Western China exists. In general, the enterprise scale has a negative effect: with enlargement of enterprise in China, the innovation efficiency of enterprise will decline, while the effect has regional disparity, with positive influence in Central and Western China, and negative influence in Eastern China. Government support has negative effects on technology innovation: indirect equity investment contributes more to technology innovation than direct fund support. Innovation environment has positive and weak effects on technology innovation, but it is the biggest obstacle in Western China, and the innovation environment in China has improved continuously. This paper provides new evidence that can shine some light on determining the factors affecting technology innovation, and also presents a novel approach, which comprises characteristics of nonlinear function approximation, high accuracy and a small sample.

  17. Danish and Norwegian wind industry: The relationship between policy instruments, innovation and diffusion

    International Nuclear Information System (INIS)

    Buen, Jorund

    2006-01-01

    This article compares the role of policy instruments in stimulating long-term technological change in Danish and Norwegian wind industry. It concludes that although predictability has periodically been low, Denmark's broad portfolio of policies and measures has been well adapted to the different stages in the development of its wind industry. This has contributed to a high degree of innovation, successful establishment in niche markets, high degree of diffusion and establishment of domestic and international mass markets, and-in recent years-an increasingly successful replacement of senescent technology with new. The motivation of Norway's wind energy policies and measures-at least up until the late 1990s-has been to increase power supply rather than to stimulate industrial development and technological change. Policies and measures have been weaker than in Denmark; have been less stable over time; and stimulated the demand side much less. They have not sufficiently covered the wind industry's perceived needs on different stages in the development of new technology, and have not sufficiently stimulated continuous improvement, learning and new product development (dynamic efficiency) in industry. This has been part of the reason why there has been only a limited extent of innovation and diffusion of wind technology in Norway

  18. Reliability theory for repair service organization simulation and increase of innovative attraction of industrial enterprises

    Science.gov (United States)

    Dolzhenkova, E. V.; Iurieva, L. V.

    2018-05-01

    The study presents the author's algorithm for the industrial enterprise repair service organization simulation based on the reliability theory, as well as the results of its application. The monitoring of the industrial enterprise repair service organization is proposed to perform on the basis of the enterprise's state indexes for the main resources (equipment, labour, finances, repair areas), which allows quantitative evaluation of the reliability level as a resulting summary rating of the said parameters and the ensuring of an appropriate level of the operation reliability of the serviced technical objects. Under the conditions of the tough competition, the following approach is advisable: the higher efficiency of production and a repair service itself, the higher the innovative attractiveness of an industrial enterprise. The results of the calculations show that in order to prevent inefficient losses of production and to reduce the repair costs, it is advisable to apply the reliability theory. The overall reliability rating calculated on the basis of the author's algorithm has low values. The processing of the statistical data forms the reliability characteristics for the different workshops and services of an industrial enterprise, which allows one to define the failure rates of the various units of equipment and to establish the reliability indexes necessary for the subsequent mathematical simulation. The proposed simulating algorithm contributes to an increase of the efficiency of the repair service organization and improvement of the innovative attraction of an industrial enterprise.

  19. One style to build them all: Corporate culture and innovation in the offshore wind industry

    International Nuclear Information System (INIS)

    Sovacool, Benjamin K.; Enevoldsen, Peter

    2015-01-01

    This study explores how Vestas and Siemens Wind Power manage technological innovation in the offshore wind power industry. It utilizes the concept of open and closed “research styles” to investigate how each company designs, constructs, and maintains offshore wind turbines. The article starts by summarizing three of the main innovation challenges facing the offshore wind sector—harsh conditions, capital intensity, and production bottlenecks—before it delves into the specific details about how Vestas and Siemens Wind Power approach turbine development. It divides this discussion into six distinct segments: resources and expenditures, stakeholder involvement and collaboration, testing and maintenance, control and knowledge management, adaptability of designs, and customization and marketing. The study finds that both Vestas and SWP, despite their corporate and cultural differences, utilize the same elements of closed and open styles. It lastly suggests that the notion of style itself may challenge certain assumptions held by scholars about managing the research and innovation process. - Highlights: • This study explores how Vestas and Siemens approach innovation in offshore wind turbine technology. • Open research styles are inclusive, participatory, cooperative, and flexible. • Closed research styles are exclusive, competitive, centralized, and rigid. • Interestingly, Vestas and Siemens use the same style to manage technological innovation. • They are closed when it comes to resources and expenditures and knowledge movement, but open in all other attributes.

  20. Innovation

    DEFF Research Database (Denmark)

    Nielsen, Janni; Yaganeh, Suzanne; Bloch Rasmussen, Leif

    2013-01-01

    This paper contributes to a theoretical discussion of creation of innovation with participants in, or outside, organisations. We address the creation of innovation with a complex theoretical understanding drawing on the Scandinavian and the Participatory Design tradition introducing two approaches...... to the processes of innovation. We ask if innovation can be initiated and enhanced looking at two collaborative approaches; participatory innovation (PIN) and cooperative innovation (COIN). We invite to dialogue and reflections on PIN’s conflict and creative frictions on one side and COIN’s complexity......, complementarity in diversity and the didactic scaffolding of the innovation process on the other side. Our contribution focuses on the methods and practices for facilitation of co-creating activities between different groups leading to cooperation, and innovation in thinking....

  1. Small Stakes Risk Aversion in the Laboratory

    DEFF Research Database (Denmark)

    Harrison, Glenn W.; Lau, Morten I.; Ross, Don

    2017-01-01

    Evidence of risk aversion in laboratory settings over small stakes leads to a priori implausible levels of risk aversion over large stakes under certain assumptions. One core assumption in statements of this calibration puzzle is that small-stakes risk aversion is observed over all levels of wealth...

  2. Model Keterkaitan Market Orientation, Leadership, Organizational Innovation dan Organizational Performance pada Industri Kerajinan di Sumatera Barat

    Directory of Open Access Journals (Sweden)

    RATNI PRIMA LITA

    2018-04-01

    Full Text Available The purpose of this study is to analyze the influence of market orientation, leadership, organizational innovation and organizational performance in handycraft industry in Bukittinggi City, Pariaman City, Padang Pariaman Regency, and Pesisir Selatan Regency. This research uses quantitative methods, while the sampling technique using Purposive sampling with sample size of 86 craft companies. The criteria assigned to the respondent is the handycraft business that produce and market their own product. In this study, data were collected through the questionnaire of the owner of the handycraft industry. Data were analyzed using structural equation modeling (SEM method with SmartPLS software. This research uses multidimensional constructions first order reflective and second order formative. Based on the data analyzed it can be concluded that leadership has a significant positive effect on business performance. This is evidenced by the two dimensions of leadership (Transactional leadership and transformational leadership is able to explain the performance of the organization well. In addition, market orientation  have 3 dimensional (Customer orientation, resource orientation, and competitor orientation is also able to give influence to organizational performance and organizational innovation. However, organizational innovation is not able to give a significant influence for the performance improvement of handycraft industry. It can be concluded that organizational performance in handycraft industry is influenced by market orientation conducted on consumers and competitors. And also the most important factor is how the attitude of leadership owned by the owner of handicraft industry in managing and running the business, in order to craft products in accordance with customer tastes.

  3. Innovative industry alignment at RMIT to develop skills for uranium industries

    International Nuclear Information System (INIS)

    Bhargava, S.K.

    2010-01-01

    'Full text:' RMIT University has recently introduced new teaching and research training programs on uranium processing technology at both undergraduate and postgraduate level. These programs have been implemented to improve young scientists and engineers' awareness of Australia's uranium processing industry, and to help provide future employees with improved background knowledge to the industry. The teaching program involves joint course development and lectures delivered by the leading scientists from ANSTO (Dr Suzanne Burling and Dr Chris Griffith) and Rio Tinto (Dr Stephen Grocott). This lecture series, which is offered to final year applied science and chemical engineering students, covers a range of topics and issues related to uranium processing including uranium mining, methods for chracterising uranium ores, extraction of uranium, the nuclear fuel cycle, waste and safety. The research training program involves honours and PhD students undertaking research projects on uranium mineralogy and uranium extraction. Research students are also provided with extensive training on how to conduct research safely using radioactive materials. The research programs are undertaken in RMIT's new EPA approved, low level radiation laboratory which has been dedicated to research projects on uranium processing. An extended overview of both of these new programs will be presented. This program is unique in Australia and is designed to address the issue of skill shortage in the ever growing Uranium industry world wide. International collaborators in this program will be most welcomed. (author)

  4. The Role of Employee-Driven Relations and Persistence in University-Industry Collaboration on Regional Innovation

    DEFF Research Database (Denmark)

    Østergaard, Christian Richter; Drejer, Ina

    important driving factor for current collaboration than the existence of employee-driven relations. This suggest that firms’ hiring a university graduate is important for establishing a university connection, but once they have initiated a collaboration, then collaboration patterns tend to persists. However...... in the innovation literature about drivers of and persistence in university-industry collaborations. More specifically, it explores the role of employee-driven relations and persistence for firms’ collaboration on innovation with specific universities. The existing studies of university-industry interaction based......Promoting university-industry collaboration on innovation has an important role in regional innovation policy. Despite apparent advantages of such collaborations, several studies have shown that most innovative firms do not collaborate with universities. The paper addresses the dearth of knowledge...

  5. Modeling technology innovation: how science, engineering, and industry methods can combine to generate beneficial socioeconomic impacts.

    Science.gov (United States)

    Stone, Vathsala I; Lane, Joseph P

    2012-05-16

    knowledge transfer, sponsors and grantees alike should find the model useful for planning, implementing, and evaluating innovation processes. High-cost/high-risk industries like healthcare require the market deployment of technology-based innovations to improve domestic society in a global economy. An appropriate balance of relevance and rigor in research, development, and production is crucial to optimize the return on public investment in such programs. The technology-innovation process needs a comprehensive operational model to effectively allocate public funds and thereby deliberately and systematically accomplish socioeconomic benefits.

  6. Energy, economic, and environmental impacts of advanced industrial process innovations, 1976--1996

    International Nuclear Information System (INIS)

    Quinn, J.E.; Reed, J.E.

    1997-01-01

    maintenance costs, and any non-energy production cost savings). in 1996, two additional DOE programs were transferred to the Office of Industrial Technologies: the Energy-Related Inventions program and the Innovative Concepts program About 30 technologies developed in these programs have seen application in the industrial sector and have had significant energy savings. OIT is currently planning to incorporate these technologies into its tracking system

  7. A study on important factors influencing innovation in service: A case study of hotel industry

    Directory of Open Access Journals (Sweden)

    Koorosh Kohyari Haghighat

    2013-07-01

    Full Text Available Hotel industry plays important role on developing tourism industry and having better services in this industry always help increase market share. The proposed study of this paper considers the effects of four variables including collaboration with staff, collaboration with customers, collaboration with partners and business owners and finally mechanism of integration of knowledge on innovation on service. The population of this survey includes 259 hotels where we send our questionnaire to 179 and manage to collect 170 ones. Cronbach alpha for four variables including collaboration with staff, collaboration with customers, collaboration with partners and business owners and finally mechanism of integration of knowledge were calculated as 0.78, 0.865, 0.743 and 0.890, respectively. The proposed study uses structural equation modeling to study the relationship between independent variables and dependent variable and the effects of four variables are confirmed when the level of significance is five percent.

  8. Co-creation of innovation: Investment with and in social capital. Studies on collaboration between education - industry - government

    NARCIS (Netherlands)

    Ehlen, Corry

    2017-01-01

    This study unravels the concept of 'CO-CREATION‘ in two large scale inter-organisational innovation programmes. Co-creation becomes internationally recognized as a leading innovative approach for regional collaboration between education, industry and government. 'SOCIAL CAPITAL’ is found to be

  9. Innovator Organizations in New Drug Development: Assessing the Sustainability of the Biopharmaceutical Industry.

    Science.gov (United States)

    Kinch, Michael S; Moore, Ryan

    2016-06-23

    The way new medicines are discovered and brought to market has fundamentally changed over the last 30 years. Our previous analysis showed that biotechnology companies had contributed significantly to the US Food and Drug Administration approval of new molecular entities up to the mid-1980s, when the trends started to decline. Although intriguing, the focus on biotechnology necessarily precluded the wider question of how the biopharmaceutical industry has been delivering on its goals to develop new drugs. Here, we present a comprehensive analysis of all biopharmaceutical innovators and uncover unexpected findings. The present biopharmaceutical industry grew steadily from 1800 to 1950 and then stagnated for two decades, before a burst of growth attributable to the biotechnology revolution took place; but consolidation has reduced the number of active and independent innovators to a level not experienced since 1945. The trajectories and trends we observe raise fundamental questions about biopharmaceutical innovators and the sustainability of the drug-development enterprise. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. IMPROVEMENT OF THE STRATEGY OF INNOVATIVE DEVELOPMENT OF ENTERPRISES OF THE MILITARY-INDUSTRIAL COMPLEX OF RUSSIA

    Directory of Open Access Journals (Sweden)

    K. B. Dobrova

    2015-01-01

    Full Text Available In article discusses one of the problems of the modern economy – features of innovative development corporations in Russia. This article examines the activities of Russian corporations in the conditions of transition to innovative development of the economy (on the example Corporation «Rostec». Examines the economic, legal and social aspects of the defi nition of «Corporation». Describes the main problems and tendencies of innovative development of Russian corporations in the current economic conditions. In modern conditions one of the most important institutions in economic development is Corporation, and its key factor is innovation. Innovation and innovation allow industrial corporations to move to a new technological level, but to achieve success in competition is not enough to have only technical superiority, equally important is innovation in the management of the Corporation.

  11. Uncovering opportunity of low-carbon city promotion with industrial system innovation: Case study on industrial symbiosis projects in China

    International Nuclear Information System (INIS)

    Dong, Liang; Gu, Fumei; Fujita, Tsuyoshi; Hayashi, Yoshitsugu; Gao, Jie

    2014-01-01

    There is a dilemma for rapid industrializing China to balance economic growth and low carbonization. Industrial symbiosis (IS) provides a system innovation to utilize the industry to fight climate change and pursue sustainable urban development, while few attentions are paid in literatures. Under this circumstance, this study reviews the low-carbon city practice in China and conducts a case study to calculate the CO 2 emissions reduction potential under promoting IS projects in two cities of China, named Jinan and Liuzhou. With the real national project in Jinan as advanced example, new scenarios related to IS are designed for Liuzhou, including comprehensive energy network, waste plastics recycling, scrap tires recycling and flying ash recycling. The material/waste and energy exchange is quantified in the IS network, as well as the related environmental benefit. The material/energy exchange is over 10 million ton and 20 thousands tce in Jinan's case, and 2.5 million ton and 45 thousand tce in Liuzhou's case. Results highlight that IS could effectively reduce CO 2 emissions. The total reduction potential amounts to 3944.05 thousands tCO 2 /year and 2347.88 thousands tCO 2 /year in Jinan and Liuzhou. Finally, policy implications on the ever-improvement of industrial symbiosis and China's sustainable urban development are proposed and discussed. - Highlights: • Investigate two real industrial symbiosis projects in Jinan and Liuzhou of China. • Quantify the material exchange and the CO 2 reduction potential of the IS network. • CO 2 reduction potential is 3944.05 and 2347.88 ktCO 2 /year in Jinan and Liuzhou. • In current China, IS is main in term of material symbiosis. • How to coordinate IS and low-carbon city is discussed

  12. Toward a dynamic perspective on explorative and exploitative innovation activities: a longitudinal study of innovation in the wind blade industry

    NARCIS (Netherlands)

    de Visser, Matthias

    2010-01-01

    Innovation requires a combination of explorative and exploitative innovation activities. Previous studies have provided valuable insights in the antecedents of investing in explorative and exploitative activities, the structural governance of exploration and exploitation and the performance

  13. Toward a dynamic perspective on explorative and exploitative innovation activities: A longitudinal study of innovation in the wind blade industry

    NARCIS (Netherlands)

    de Visser, Matthias; Faems, D.L.M.

    2010-01-01

    Innovation requires a combination of explorative and exploitative innovation activities. Previous studies have provided valuable insights in the antecedents of investing in explorative and exploitative activities, the structural governance of exploration and exploitation and the performance

  14. Economic and ecological advantages of innovative project implementation at woodworking industry

    Directory of Open Access Journals (Sweden)

    Irina N. Yepifanova

    2015-03-01

    Full Text Available Orientation to innovative development involves the strategic focus onto manufacturing high-tech products in the priority sectors of the economy. Implementation of innovative projects aimed at reducing the energy component in overall costs of enterprise is demanded and necessary. The aim of the research is to prove the economic and ecological benefits of using at domestic wood industry enterprises the wood pellets as an alternative biofuel. The main economic indicators of the project for the pellets production presented indicate the expenses-to-profits ratio; studied is the cost of season heating in Ukraine of 1000 m2 with both traditional and alternative fuels. Noted is that the use of pellets as ecological biofuel is more economical in comparison with electricity and gas. Exposed are the economic benefits of the pellet boiler heating by different fuels.

  15. BIOREFINERIES – NEW GREEN STRATEGY FOR DEVELOPMENT OF SMART AND INNOVATIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Grażyna A. PŁAZA

    2016-07-01

    Full Text Available Ecological engineering or ecotechnology is defined as the design of sustainable production that integrate human society with the natural environment for the benefit of both. In order to reach the goal of sustainability therefore important that bioproduct production systems are converted from to natural cycle oriented. In natural cycles there are not waste, but products are generated at different stages of the cycle. The ecotechnology creates a sustainable bioeconomy using biomass in a smart and efficient way. The biorefining sector, which uses smart, innovative and efficient technologies to convert biomass feedstocks into a range of bio-based products including fuels, chemicals, power, food, and renewable oils, currently presents the innovative and efficient bio-based production can revitalize existing industries. The paper presents the concept of biorefinery as the ecotechnological approach for creating a sustainable bioeconomy using biomass in a smart and efficient way.

  16. Biorefineries - New Green Strategy For Development Of Smart And Innovative Industry

    Science.gov (United States)

    Płaza, Grażyna A.; Wandzich, Dorota

    2016-09-01

    Ecological engineering or ecotechnology is defined as the design of sustainable production that integrate human society with the natural environment for the benefit of both. In order to reach the goal of sustainability therefore important that bioproduct production systems are converted from to natural cycle oriented. In natural cycles there are not waste, but products are generated at different stages of the cycle. The ecotechnology creates a sustainable bioeconomy using biomass in a smart and efficient way. The biorefining sector, which uses smart, innovative and efficient technologies to convert biomass feedstocks into a range of bio-based products including fuels, chemicals, power, food, and renewable oils, currently presents the innovative and efficient bio-based production can revitalize existing industries. The paper presents the concept of biorefinery as the ecotechnological approach for creating a sustainable bioeconomy using biomass in a smart and efficient way.

  17. Collaboration for Innovation and Sustainable Performance: Evidence of Relationship in Electro-Electronic Industry

    Directory of Open Access Journals (Sweden)

    Marcos Roberto Kuhl

    2016-01-01

    Full Text Available This study aimed to identify how collaboration for innovation relates to the sustainable performance of the electronics industry in Brazil. We used a quantitative approach, collecting data by means of a cross-sectional survey in a sample of 112 companies. The main result indicates that the relationship between collaboration and sustainable performance is positive and significant, but of low intensity, confirming the indication from the literature. The same is noticed in checking the relationship between the collaboration and the three dimensions of sustainable performance, although no statistically significant difference was found between the degree of correlation and the three dimensions. Intervening factors such as size, age, internationalization and capital structure were also considered in verifying the relationship between collaboration for innovation and sustainable performance.

  18. The Role of Mobility and Employee-Driven Relations for University-Industry Collaboration on Innovation

    DEFF Research Database (Denmark)

    Østergaard, Christian Richter; Drejer, Ina

    This paper analyzes the role of mobility and employee-driven relations for firms' collaboration on innovation with specific universities. It is argued that personal employee-driven relations and geographical proximity are important determinants for which universities firms decide to collaborate...... with. Therefore, hiring and mobility of employees can help explain why firms collaborate with specific universities or discontinue collaboration. It is argued that the university of graduation and the field of study of a firm's employees help explain why it collaborate with a specific university....... Furthermore, the paper also addresses the importance of developing relations and collaborative experience over time for university-industry collaboration by studying employee-driven relations and collaboration patterns for a large sample of firms over two consecutive Community Innovation Surveys covering...

  19. AFSPC Innovation and Science and Technology Outreach to Industry and Academia

    Science.gov (United States)

    Sanchez, Merri J.; Dills, Anthony N.; Chandler, Faith

    2016-01-01

    The U.S. Air Force is taking a strategic approach to ensuring that we are at the cutting edge of science and technology. This includes fostering game-changing approaches and technologies that are balanced with operational needs. The security of the Nation requires a constant pursuit of science, technical agility, and a rapid adoption of innovation. This includes pursuits of game-changing technologies and domains that perhaps we cannot even imagine today. This paper highlights the Air Force Space Command (AFSPC) collaboration and outreach to other government agencies, military and national laboratories, industry, and academia on long term science and technology challenges. In particular we discuss the development of the AFSPC Long Term Science and Technology Challenges that include both space and cyberspace operations within a multi-domain environment and the subsequent Innovation Summits.

  20. THE INTERNATIONAL EXPERIENCE OF INTERACTION BETWEEN GOVERNMENT AND BUSINESS IN THE SPHERE OF INNOVATION: NEW TOOLS FOR INDUSTRIAL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Anastasiya Yurievna Nikitaeva

    2015-09-01

    Full Text Available The article is devoted to the study of international experience of interaction between government and business in the innovative development of the industrial sector. Purpose of the paper is to determine the features and content of the new mechanisms of industrial development, based on integration platform of economic agents’ partnership.Methodology. The complex of system, synergy, institutional, evolutionary, and endogenous approaches is used as a methodological basis of research. Methodological apparatus of the article is presented by methods of the analysis, synthesis, abstraction, logical generalization.Results: the assessment of influence of government and commercial structures partnership on the innovative industrial development is given; the tendency of expansion of a partnership segment in the innovative sphere of the industry is empirically illustrated; features and key technologies of the new integration mechanism of industrial development are given.Conclusion: complication of innovative processes in combination with other factors results in expediency of development of partnership of economic entities in the sphere of industrial development. The extent and effectiveness of partnership practices in innovation is largely determined by the role of state institutions. For innovation of industrial development it is expedient to form the mechanisms using the integrated capacity of public and private institutions.Practical implications: the results of the study can be used in the justification of the priorities and measures of the state innovation and industrial policy, the development of concepts and programs of clustering of the regions and the development of public-private partnerships, and also formation of strategy of development of industrial structures.

  1. Complexities in innovation management in companies from the European industry. A path model of innovation project performance determinants

    NARCIS (Netherlands)

    Tepic, M.; Kemp, R.G.M.; Omta, S.W.F.; Fortuin, F.T.J.M.

    2013-01-01

    Purpose – The purpose of this paper is to provide an integrated framework of complex relations among innovation characteristics, organizational capabilities, innovation potential and innovation performance. Design/methodology/approach – The model is tested using partial least squares (PLS) modeling

  2. INNOVATIONS AS AN IMPORTANT FACTOR INFLUENCING LABOUR PRODUCTIVITY IN THE MANUFACTURING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Marija Bušelić

    2016-12-01

    Full Text Available Economic science has long recognized labour productivity as an important factor of economic growth. In the uncertain conditions of increasingly fierce and complex competition, it becomes one of the key prerequisites for an adequate response to global challenges. The development of labour productivity has to be observed as a multi-dimensional process including numerous interconnected quantitative and qualitative factors, in particular human factors and technological advancement realized through investments in research and development (innovations. The analysis of labour productivity in the manufacturing industry of the selected countries, Germany and China, is performed in the context of an important influential factor – innovations, and interdependently with the economic growth of the selected countries. The research results and the conducted regression analyses indicate a superiority of German labour productivity in the manufacturing industry, which is strongly affected by considerable investments in research and development. However, the technological convergence of China as the upcoming power is increasingly important, which shows that the gap in labour productivity is decreasing, making developed countries face new challenges posed by globalization. The analysis of the interdependence of economic growth (GDP and labour productivity in the manufacturing industry points to a positive link and the conclusion that the elasticity of the GDP to changes in labour productivity is greater in China than in Germany.

  3. The Formation of the System of Innovation Management of Development of Enterprises of Hotel-Restaurant Industry

    OpenAIRE

    Davydova Oksana Yu.

    2017-01-01

    The article is aimed at elaborating a methodical approach to the formation of the system of innovation management of development of enterprises of hotel-restaurant industry. The main problems of the domestic enterprises of hotel-restaurant industry were considered. An analysis of economic essence of the concepts of: «system», «innovations», «management», «development» was carried out and the interrelation between them was determined. The decomposition analysis of the concept of «innovation ma...

  4. Innovators.

    Science.gov (United States)

    NEA Today, 2001

    2001-01-01

    Describes various innovations that have been developed to enhance education. These innovations include: helping educators help at-risk students succeed; promoting high school journalism; ensuring quality online learning experiences; developing a student performing group that uses theater to address social issues; and having students design their…

  5. Innovation and international technology transfer: The case of the Chinese photovoltaic industry

    International Nuclear Information System (INIS)

    Tour, Arnaud de la; Glachant, Matthieu; Meniere, Yann

    2011-01-01

    China is the largest solar photovoltaic cell producer in the world, with more than one third of worldwide production in 2008, exporting more than 95 percent of what it produces. The purpose of this paper is to understand the drivers of this success and its limits, with a particular emphasis on the role of technology transfers and innovation. Our analysis combines a review of international patent data at a detailed technology level with field interviews of ten Chinese PV companies. We show that Chinese producers have acquired the technologies and skills necessary to produce PV products through two main channels: the purchasing of manufacturing equipment in a competitive international market and the recruitment of skilled executives from the Chinese diaspora who built pioneer PV firms. The success of these firms in their market is, however, not reflected in their performance in terms of innovation. Rather, patent data highlight a policy-driven effort to catch up in critical technological areas. - Research Highlights: →China has become the world leader in the production of PV cells and modules, but remains far behind industrialized countries in the more upstream segments of the photovoltaic industry. →International technology transfers from industrialized countries to China have taken place through two main channels: the competitive market of manufacturing equipments, and labour mobility. →Fierce competition between equipment manufacturers and public availability of core technology have prevented intellectual property rights from hindering technology transfers towards China. →As compared with their foreign competitors, Chinese firms file many patents, but of low technical and commercial value. →Chinese firms' innovation is focused on process rather than on products.

  6. Innovative-marketing directions of recreational-tourism industry in Ukraine

    Directory of Open Access Journals (Sweden)

    Shevchenko Hanna Mykolayivna

    2015-10-01

    Full Text Available In the article the necessity of the development of recreational-tourism industry in Ukraine, despite the difficult political and economic situation in the country, based on the innovative marketing activities is grounded. The features of recreation areas on the analysis of the relevant natural resources are described, and the marketing activities for the development of recreational-tourist areas of Ukraine are proposed, in particular the creation of the database objects of recreational management, using the tool of marketing generations, the strengthening cooperation with government agencies and travel agencies.

  7. Understanding Big Data for Industrial Innovation and Design: The Missing Information Systems Perspective

    Directory of Open Access Journals (Sweden)

    Miguel Baptista Nunes

    2017-12-01

    Full Text Available This paper identifies a need to complement the current rich technical and mathematical research agenda on big data with a more information systems and information science strand, which focuses on the business value of big data. An agenda of research for information systems would explore motives for using big data in real organizational contexts, and consider proposed benefits, such as increased effectiveness and efficiency, production of high-quality products/services, creation of added business value, and stimulation of innovation and design. Impacts of such research on the academic community, the industrial and business world, and policy-makers are discussed.

  8. Supply side management innovation: —Analysis on Enterprises in Scientific Industry Park Based on Market Orientation

    Science.gov (United States)

    Li, Xing; Mao, Fenlan; Lin, Mian; Yadi, Nan

    2017-12-01

    This research presents a conceptual framework for incorporating organizational learning and innovations as the mediating variables between market orientation and organizational performance. The samples of this study include 145 companies from the information technology industry in the Scientific Industry Parks. The global model fit is acceptable. This empirical result supports the constructs mentioned above. 1. Market orientation has a positive and direct impact on organizational learning, administrative and technical innovation. 2. Organizational learning has a positive and direct impact on administrative and technical innovation, but with no statistically significant direct impact on performance. 3. Organizational learning does have a positive and indirect impact on performance by means of organizational innovations. 4. It is not statistically significant that the impact of the two innovation types (both administrative and technical) interact with each other.

  9. The Formation of the System of Innovation Management of Development of Enterprises of Hotel-Restaurant Industry

    Directory of Open Access Journals (Sweden)

    Davydova Oksana Yu.

    2017-11-01

    Full Text Available The article is aimed at elaborating a methodical approach to the formation of the system of innovation management of development of enterprises of hotel-restaurant industry. The main problems of the domestic enterprises of hotel-restaurant industry were considered. An analysis of economic essence of the concepts of: «system», «innovations», «management», «development» was carried out and the interrelation between them was determined. The decomposition analysis of the concept of «innovation management of development of enterprises» has been proposed and it has been defined that for the efficient functioning of enterprises of hotel-restaurant industry in conditions of rigid market competition it would be necessary to implement the system of innovation management of enterprise development, the essence of which is formation of a process, aimed at increasing competitiveness, individuality, adaptability, awareness, improvement, cognition, quality, and other characteristics.

  10. Industrial property for science’s management, technology and innovation in Cuban State companies

    Directory of Open Access Journals (Sweden)

    Dulce María Contreras Villavicencio

    2017-08-01

    Full Text Available The paper synthesizes some research on industrial property aspects from the socio-legal perspective and financial accounting. Its focus to the socialist state enterprise adaptation in his economic fact, social and environmental responsibility as a fundamental Cuban model reach, competitiveness and high performance in socialist state enterprise. It outlines criteria on the ordering and implementation of industrial property through the management of science and technology, protection and dissemination of knowledge results as alternatives of regulation in chain of value to full cycle of innovation, dynamics of intangible heritage and relationships, exchange with marketing as business philosophy of business application. Strategies are proposed regarding the rights of this institution in the economic-organization management state.

  11. Procurement of non-incremental sustainable technology innovations : the case of small entrepreneurial firms supplying New Zealand construction & building industry

    NARCIS (Netherlands)

    Dr. Mark P. Mobach; Jeff Seadon; Anne Staal; John Tookey; Gert Walhof

    2014-01-01

    Abstract.Traditionally, the construction industry in New Zealand and in other countries has seen a low productivity and a low track record for successful innovations (Fairweather, 2010). The industry also lags in sustainability (e.g. Nemry, 2008) when seen from a broader or lifecycle perspective.

  12. Procurement of non-incremental sustainable technology innovations : the case of small entrepreneurial firms supplying New Zealand construction & building industry

    NARCIS (Netherlands)

    Staal, Anne; Tookey, John; Seadon, Jeff; Walhof, Gert; Mobach, Mark; Mbachu, Jasper

    2014-01-01

    Traditionally, the construction industry in New Zealand and in other countries has seen a low productivity and a low track record for successful innovations (Fairweather, 2010). The industry also lags in sustainability (e.g. Nemry, 2008) when seen from a broader or lifecycle perspective. This has a

  13. Proceed to the innovation in the pharmaceutical industry. The case of Spain

    Directory of Open Access Journals (Sweden)

    Aída Salazar García

    2015-01-01

    Full Text Available This article explores sectors identified innovation in Spanish pharmaceutical companies. It also considers domestic firms and foreign subsidiaries in the country. The analysis covers the period 2009 to 2011 for a population N=200 affiliates at that time Farmaindustria and Plan Profarma. The work involved a search of useful information on the websites of pharmaceutical companies based in Spain statically describes the innovative profile of the Spanish pharmaceutical through descriptive statistical analysis. Thus a foundation for documenting the results in a database in order to get a picture with determination on the behavior of Spanish pharmaceutical sector and possible trends is created.The high content of literary contribution on the pharmaceutical sector is expressed in a globalized national and international level, rejecting data and information that could provide signals threat or opportunity regarding short period time, and which in turn are comparable to other years since the Spanish pharmaceutical industry is constituted by companies of foreign origin (50.5% and domestic capital (49.5%. Of the latter SMEs are the protagonists of small innovations established in Madrid and Barcelona mainly.

  14. Innovation

    African Journals Online (AJOL)

    In recent years ULA has emphasized advocacy, and contributed to progress towards new legislation (freedom of information, copyright, the ... East African Community e-government strategy) of importance to the library and ... Innovation Vol.

  15. Best in class: hot competition makes Canada an 'incredibly innovative environment' by global industry standards

    International Nuclear Information System (INIS)

    Jaremko, G.

    2000-01-01

    The highly innovative environment in the field service sector of the oil and natural gas industry and the intense competition generated by it are discussed. Despite the fact that Canada produces only 3.5 per cent of the world's oil and 7.0 per cent of its natural gas, Canada is a world leader in the development of field service systems and equipment. On a return on investment basis the field service sector outperformed the exploration and production sector, and while many of them are small compared to the giants like Haliburton and Schlumberger, small field service companies frequently outperform the giants, if only because below 100 million dollars in revenues, investors expect a 25 to 30 per cent return on equity. Constant cost cutting and an eye on the bottom line, combined with products and services of high quality, and the intense rivalry and competition keeps the industry constantly on its toes to do more with less, to come up with innovative business practices and to stay on the cutting edge of new technology. Progress by several of the field service companies, large and small, are reviewed by way of illustration

  16. An Innovation Systems Assessment of the Australian Biofuel Industry. Policy and Private Sector Implications

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Jason D.

    2006-07-15

    A strong biofuel industry in Australia has the potential to provide numerous benefits to the nation and its peoples. The benefits include; reduced emissions of greenhouse gases and harmful particulate matter, a boost to rural development goals, enhanced fuel security and a lower balance of payments. For biofuels to be seriously considered as alternatives to traditional petroleum based automotive fuels they must be economically viable. The findings from a series of Australian Bureau of Agricultural and Resource Economics (ABARE) investigations suggest that ethanol and biodiesel production would be economically viable, in the Australian context, with oil prices in the range of 30-40 USD a barrel. Despite the price of oil being in or above this range for over two years a strong home grown biofuel industry has failed to develop in Australia. The purpose of this master's thesis therefore is to identify the critical issues facing biofuel industry development in Australian and to propose possible policy and private sector strategies for dealing with them. The analysis was done in the following three steps; the first was to map the development of the ethanol and biodiesel industries, the second was to analyse the performance of the industries overtime and the third was to identify the mechanisms which have either induced or blocked their growth. The strategies proposed by this thesis were derived from analysing the inducing and blocking mechanisms and the related issues. The innovation systems approach was chosen because of its ability to provide insights into key industry players, their network interactions and the institutional setup within which they work together to develop, diffuse and use their products. The data needed for the analysis stated above included information related to the development, diffusion and use of ethanol and biodiesel; that is, details about the industry actors and their activities, industry networks, product standards, excise arrangements

  17. An Innovation Systems Assessment of the Australian Biofuel Industry. Policy and Private Sector Implications

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Jason D

    2006-07-15

    A strong biofuel industry in Australia has the potential to provide numerous benefits to the nation and its peoples. The benefits include; reduced emissions of greenhouse gases and harmful particulate matter, a boost to rural development goals, enhanced fuel security and a lower balance of payments. For biofuels to be seriously considered as alternatives to traditional petroleum based automotive fuels they must be economically viable. The findings from a series of Australian Bureau of Agricultural and Resource Economics (ABARE) investigations suggest that ethanol and biodiesel production would be economically viable, in the Australian context, with oil prices in the range of 30-40 USD a barrel. Despite the price of oil being in or above this range for over two years a strong home grown biofuel industry has failed to develop in Australia. The purpose of this master's thesis therefore is to identify the critical issues facing biofuel industry development in Australian and to propose possible policy and private sector strategies for dealing with them. The analysis was done in the following three steps; the first was to map the development of the ethanol and biodiesel industries, the second was to analyse the performance of the industries overtime and the third was to identify the mechanisms which have either induced or blocked their growth. The strategies proposed by this thesis were derived from analysing the inducing and blocking mechanisms and the related issues. The innovation systems approach was chosen because of its ability to provide insights into key industry players, their network interactions and the institutional setup within which they work together to develop, diffuse and use their products. The data needed for the analysis stated above included information related to the development, diffusion and use of ethanol and biodiesel; that is, details about the industry actors and their activities, industry networks, product standards, excise arrangements

  18. An Innovation Systems Assessment of the Australian Biofuel Industry. Policy and Private Sector Implications

    International Nuclear Information System (INIS)

    Nielsen, Jason D.

    2006-07-01

    A strong biofuel industry in Australia has the potential to provide numerous benefits to the nation and its peoples. The benefits include; reduced emissions of greenhouse gases and harmful particulate matter, a boost to rural development goals, enhanced fuel security and a lower balance of payments. For biofuels to be seriously considered as alternatives to traditional petroleum based automotive fuels they must be economically viable. The findings from a series of Australian Bureau of Agricultural and Resource Economics (ABARE) investigations suggest that ethanol and biodiesel production would be economically viable, in the Australian context, with oil prices in the range of 30-40 USD a barrel. Despite the price of oil being in or above this range for over two years a strong home grown biofuel industry has failed to develop in Australia. The purpose of this master's thesis therefore is to identify the critical issues facing biofuel industry development in Australian and to propose possible policy and private sector strategies for dealing with them. The analysis was done in the following three steps; the first was to map the development of the ethanol and biodiesel industries, the second was to analyse the performance of the industries overtime and the third was to identify the mechanisms which have either induced or blocked their growth. The strategies proposed by this thesis were derived from analysing the inducing and blocking mechanisms and the related issues. The innovation systems approach was chosen because of its ability to provide insights into key industry players, their network interactions and the institutional setup within which they work together to develop, diffuse and use their products. The data needed for the analysis stated above included information related to the development, diffusion and use of ethanol and biodiesel; that is, details about the industry actors and their activities, industry networks, product standards, excise arrangements

  19. Relationships between vocational training centres and industrial SMEs in the Basque Country: A Regional Innovation System approach

    Directory of Open Access Journals (Sweden)

    Eneka Albizu

    2011-11-01

    Full Text Available Purpose: The aim of this document is to analyse the reach of the relation between vocational training (VT centres and industrial SMEs in the Basque Country (Spain, and its influence on innovation processes developed by companies.Design/methodology/approach: We employ the conceptual framework offered by the Regional Innovation System (RIS perspective and the information supplied, on the one hand, by relevant actors within the vocational training system, through in-depth interviews, and, on the other, by the response of industrial SMEs to a survey.Findings: The results obtained suggest that vocational training centres are an agent of significance within the RIS, contributing through its main lines of action (formal education, continuous training and company services to improving the competitiveness of companies and to stimulating their innovation processes.Research limitations: Although this paper has described the nature of the main mechanisms of relation between VT centres and industrial SMEs, there is a need for ongoing research to analyse the contribution of the educational system to innovation processes in industrial SMEs. For this purpose it would be interesting to measure how the skills of qualified workers and technicians coming from the VT system mesh with company innovation processes.Originality/value: The results of this study highlight a positive relationship between vocational training and innovation.

  20. The impact of innovation and the use of ICTs on human capital development in Spanish industry

    Directory of Open Access Journals (Sweden)

    Josep-Maria Batalla-Busquets

    2015-06-01

    Full Text Available Purpose: The analysis of the characteristics of the industrial companies that invest in the training of their human capital in comparison to the organizations that do not train their employees. This characterization is focused especially on the innovative capacity of firms and their technological applications. It also analyzes the factors that determine the likelihood that a company invests in personnel training. Design/methodology/approach: Descriptive characterization of those companies that invest in personnel training, comparing them against those who do not invest in improving its human capital. Furthermore, factors influencing the decision that a company invest in training are analyzed through a logistic regression. Among them we included the intensity of technological usage and the innovation capacity. This research is based on data from the Survey of Business Strategies (ESEE in 2009, conducted annually. The sample is approximately 1,800 companies, being representative of the Spanish manufacturing sector. Findings and Originality/value: Companies with a higher likelihood of investing in training of their workers are those with a larger number of workers, a higher level of qualification of employees, more stable labor relations, greater participation foreign capital, and also, have a higher level of technological uses, carries more technological partnerships with other organizations and has a more intense innovative activity. Social implications: In the current situation of job destruction and lack of competitiveness of the Spanish industry in increasingly globalized markets, training of workers is seen as the main alternative to increase the productivity of the Spanish industry. This study shows that the industrial structure does not meet the basic conditions described in the scientific literature, in order the companies to train their workers with the risk of exclusion that entails. Originality/value: The study of the characteristics of

  1. Is it possible to recycle nuclear wastes? Costs, risks and stakes of the plutonium industry; Peut-on recycler les dechets nucleaires? Couts, risques et enjeux de l'industrie du plutonium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This document, published by the French association 'Sortir du nucleaire' (Get out of nuclear), gives some information on the chain reaction from uranium to plutonium, the difference between reprocessing (which does not reduce waste volumes but multiply waste types) and recycling, the high risks associated with plutonium transport, La Hague as the most dangerous nuclear site in France, reprocessing as the alibi for the French nuclear industry, Areva as an expert in propaganda, reprocessing as an absurd world strategy, plutonium as a fuel for proliferation, the myth of unlimited energy with the breeder reactors, and so on

  2. Strengthening Industrial Ecology’s Links with Business Studies: Insights and Potential Contributions from the Innovation and Business Models Literature

    Directory of Open Access Journals (Sweden)

    Samantha Sharpe

    2014-03-01

    Full Text Available The declining availability of natural resources and the environmental impacts of continued extraction of primary resources for production activities have forced greater focus on waste streams and recycling activities. Industrial ecology as a field of practice and theory has been closely related to sustainability issues, yet despite the development of much theory and specific tools and methodologies, the link between natural, industrial and economic systems is not convincing. Not only that, the need for delivering sustainable production and consumption practices is increasing, which is demanding new solutions to existing problems, particularly around the degree of novelty. The interaction of industrial ecology with business studies and industrial investment decision-making remains under-developed, and this is likely impacting on the adoption of more sustainable and resource-efficient practices. As such, this paper uses a constructive approach and explores how two areas of the literature can support the development of the industrial ecology field into strategic business practice: firstly, the innovation literature, particularly the emerging work on open innovation and sustainable innovation as a model to understand radical innovation processes and the creation and maintenance of networked systems of firms; secondly, the closely related area of business model (BM innovation, specifically the emerging typologies of sustainable BMs and how these typologies can be developed and used as a route to positioning recycling activities at the strategic management level of the firm.

  3. Participatory innovation through user-designed knowledge sharing and Web2.0 in the Danish seed industry

    DEFF Research Database (Denmark)

    Tveden-Nyborg, Svend; Boelt, Birte; Misfeldt, Morten

    seed scientists from Aarhus University will work together with seed growers and seed company consultants in designing a collaborative knowledge platform to optimise the diffusion of innovation between them. The aim of the Ph.D. project is to look at the processes within the three communities......For many years the Danish seed industry has been at the forefront with high quality seed production, but in a rapidly changing global market innovation is a key factor for the future of Danish seed production - one important element to innovation is transfer of knowledge. In a new Ph.D. project...... of practice in their participatory efforts to design and select technologies that will improve their knowledge dissemination through a shared understanding of learning and innovation within the Danish seed industry. The research questions are: •What boundary objects emerge between and within the collaborating...

  4. Participatory innovation through user-designed knowledge sharing and Web2.0 in the Danish seed industry

    DEFF Research Database (Denmark)

    Tveden-Nyborg, Svend; Boelt, Birte; Misfeldt, Morten

    2010-01-01

    For many years the Danish seed industry has been at the forefront with high quality seed production, but in a rapidly changing global market innovation is a key factor for the future of Danish seed production - one important element to innovation is transfer of knowledge. In a new Ph.D. project...... seed scientists from Aarhus University will work together with seed growers and seed company consultants in designing a collaborative knowledge platform to optimise the diffusion of innovation between them. The aim of the Ph.D. project is to look at the processes within the three communities...... of practice in their participatory efforts to design and select technologies that will improve their knowledge dissemination through a shared understanding of learning and innovation within the Danish seed industry. The research questions are: •What boundary objects emerge between and within the collaborating...

  5. THE IMPACT OF SPATIAL PROXIMITY TO CUSTOMERS, SUPPLIERS AND COMPETITORS ON INNOVATION ACTIVITY IN MEDIUM HIGH AND HIGH TECHNOLOGY INDUSTRY IN POLAND

    OpenAIRE

    Piotr Dzikowski

    2016-01-01

    The aim of this study is to determine the impact of spatial proximity to customers, suppliers and competitors on innovation activity in medium high and high technology manufacturing industries in Poland. It is assumed that innovation activity is facilitated by both local suppliers and customers whereas it is decreased by local competitors. The scope of the survey relates to innovation in medium high and high technology manufacturing industries in Poland. It concerns innovation at the firm lev...

  6. Design Capitalism: Design, Economics and Innovation in the Auto-Industrial Age

    Directory of Open Access Journals (Sweden)

    Peter Murphy

    Full Text Available Automation is replacing white-collar office work and non-dexterous manual work, causing major structural change in the job market. As advanced economies shift from a post-industrial to an auto-industrial model, all kinds of routine work is being replaced by machines. Mid-range job opportunities are shrinking, and labor markets are polarizing. Demand for dexterous service work nevertheless remains strong, as does demand for abstract labor working with patterns rather than with rules or procedures. Design is a mid-tier occupation that is growing rather than declining. “Design” is also a metaphor for abstract labor of all kinds; it exemplifies work that is creative, innovative, problem-solving, and reliant on judgment rather than rules. Heightened demand for abstract labor reflects the evolving nature of capitalist economies. The contribution of invention, ingenuity and imagination to the creation of economic value continues to expand. The auto-industrial era is coeval with design capitalism; together they represent a key dimension of future economics.

  7. Innovative information technologies and their impact on the performance of the entities which activate in the retail industry

    OpenAIRE

    Valentin-Florentin Dumitru; Gabriel Jinga; Florin Mihai; Aurelia Stefănescu

    2015-01-01

    The use of innovative information technologies can represent an advantage for the companies in the retail industry. This research is based on the results of an empirical study. The research was built under the auspices of the diffusion of innovations theory. Using the questionnaires collected we could establish correlations between the variables included into three categories (company’s size, the information technologies used for retail, the impact of information technologies on the company) ...

  8. A study of success and failure in product innovation with specific reference to the South African electronics industry

    OpenAIRE

    2014-01-01

    M.Com. (Business Management) The innovation and marketing of new products has become increasingly important for the profitability of companies. Developing new products is a risky endeavour. Research shows that new product development often fails. As such, it is very important that product development managers are aware of the factors that can cause product failure. This research studied the product innovation process in the South African electronics industry. The objective of the study was...

  9. Promoting Profit Model Innovation in Animation Project in Northeast Asia: Case Study on Chinese Cultural and Creative Industry

    OpenAIRE

    Hao Jiao; Yupei Wang; Hongjun Xiao; Jianghua Zhou; Wensi Zeng

    2017-01-01

    Building on a case study of three animation companies in the Chinese cultural and creative industry, this study aims to understand how profit model innovation is promoted. Due to the rapidly changing environments and resource scarcity, cultural and creative companies need to select the appropriate profit model according to their own key resources. The study uncovers two critical factors that promote profit model innovation in animation projects: the quantity of consumers and their consumption...

  10. The Dynamics of the Regional Innovation around the Oil and Gas Industries: Cases of Stavanger and Aberdeen

    OpenAIRE

    Gjelsvik, Martin

    2011-01-01

    This paper presents the IRIS and MIT comparative study of the two oil capitals in Europe: Aberdeen and Stavanger, in order to analyze two successful oil and gas clusters. The Norwegian innovation system would be presented in detail. The article also examines the intrinsic role between the universities and the industrial context in the regional innovation system. Este artículo presenta el estudio comparativo entre las dos capitales petroleras de Europa, Aberdeen y Stavanger, realizado por I...

  11. The economics and management of innovation in travel and tourism services: The case of European cruise industry in Dubai

    OpenAIRE

    Di Foggia, Giacomo; Lazzarotti, Valentina; Pizzurno, Emanuele

    2012-01-01

    Firms entering new markets face a difficult challenge: how to manage the innovation process to satisfy specific clients’ requests. In view of its geographical location and business friendly policies Dubai has become the gateway between East and West. Thus, European travel & tourism industry predicts business development. Prior research suggests that managers should consider religious factors to avoid strategic drift. In this paper we explore what kind of innovations should be introduced in t...

  12. Dwelling thermal renovation: which stakes, which solutions?

    International Nuclear Information System (INIS)

    Delduc, Paul; Demeulenaere, Laurence; Verdure, Mathieu; Ayong Le Kama, Alain; Fuk Chun Wing, Dimitri; Kiefer, Noemie; Mauroux, Amelie; Charlier, Dorothee; Hini, Sihame; Pinto Silva, Kleber; Giraudet, Louis Gaetan; Nauleau, Marie-Laure; Daussin-Benichou, Jeanne-Marie; Teissier, Olivier; Finidori, Esther; Grandjean, Alain; Allibe, Benoit; Gadrat, Pierre; Couriol, Aude; Menard, Francois; Rouquette, Celine; Houriez, Guillaume; Francois, Dominique; Aubert, Celine; Canardon, Daniel

    2015-01-01

    This publication proposes three sets of contributions. The first one addresses context and stakes. The contributions propose: a literature review on household behaviour and investments in energy efficiency, a focus on the key role of dwellings in energy transition through a comparative study of the four pathways of the National Debate for Energy Transition, and a discussion about consensus and uncertainties regarding the determining factors of heating temperature in dwellings. The second set addresses public policies and their assessment: improvement of the technical-economical assessment of the benefit of dwelling energetic renovations, discussion of the organisation and results of a survey on dwelling, equipment, and energy needs and uses, an analysis of several measures aimed at reaching objectives of energy efficiency of dwellings, a discussion of renovation works quality, a discussion of the impact of the sustainable development tax credit on thermal renovation, the optimisation of energy renovation in co-properties by third party financing, some foreign examples of policies in favour of dwelling thermal renovation. The third set of contributions addresses the needed technical, organisational and market evolutions: how the building sector can face the challenges of energy transition, the possibilities to propose innovative solutions adapted to existing housing buildings, and a comparative analysis of material and building equipment costs and market structures in Europe. Other texts are proposed in appendix: the origin of the Phebus survey, a description of incentive arrangements, and a map of climate zones in France

  13. The renaissance of a local wine industry: The relevance of social capital for business innovation in DOQ El Priorat, Catalonia

    Directory of Open Access Journals (Sweden)

    María José Fernández Aldecua

    2017-12-01

    Full Text Available The paper presents the results of a case study that aims to investigate whether the presence of both bridging and bonding social capital, acting together, can stimulate entrepreneurial innovation within the wine industry at a regional level. The study also investigates the manner in which both types of social capital interact to motivate such innovation. This is done through the analysis of the Catalan region of Priorat, and more specifically the entrepreneurial innovations that the region’s wine sector experienced over a twenty year period at the turn of the current millennium. The results indicate that both forms of social capital do not act in isolation, but on the contrary are jointly responsible for stimulating innovation within the wine-producing network. Keywords: Social capital, Social networks, Regional innovation, Entrepreneurs, Catalonia

  14. Innovation

    African Journals Online (AJOL)

    The purpose of Innovation journal of appropriate librarianship and information work in Southern Africa is to publish material on libraries, information supply and other related matters in South and Southern Africa. Vol 45 (2012). DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ...

  15. Innovation

    DEFF Research Database (Denmark)

    Torfing, Jacob; Ricard, Lykke Margot

    2017-01-01

    Innovation i krydsfeltet mellem forskellige styringsparadigmer i offentlige organisationer. New Public Governance gør det muligt at skabe offentlig værdi på nye måder. Men NPG er ingen trylledrik, der fra den ene dag til den anden skaber balance mellem borgernes store forventninger og en trængt ø...

  16. Green innovation and sustainable industrial systems within sustainability and company improvement perspective

    Science.gov (United States)

    Edi Nugroho Soebandrija, Khristian

    2017-12-01

    This paper comprises discussion of Green Innovation and Sustainable Industrial Systems within Sustainability and Company Improvement Perspective of beverage manufacturing company (BMC). The stakeholder theory is the grand theory for the company improvement perspective in this paper. The data processing in this paper is conducted through software which are SEM-PLS with SmartPLS 2.0 and SPSS 19. The specified objective of this paper has focus on sustainability as one of 6 variables, in lieu of those 6 variables as the big picture. The reason behind this focus on sustainability is the fact that there are assorted challenges in sustainability that is ranging from economic, environment and company perspectives. Those challenges in sustainability include the sustainable service supply chain management and its involvement of society. The overall objective is to analyze relationship hypothesis of 6 variables, 4 of them (leadership, organizational learning, innovation, and performance) are based on Malcolm Baldrige’s performance excellence concept to achieve sustainability and competitive advantage through company-competitor and customer questionnaire, and its relation to Total Quality Management (TQM) and Quality Management System (QMS). In conclusion, the spearheaded of company improvement in this paper is in term of consumer satisfaction through 99.997% quality standards. These can be achieved by ambidexterity through exploitation and exploration innovation. Furthermore, in this paper, TQM enables to obtain popularity brand index achievement that is greater than 45.9%. Subsequently, ISO22000 of food security standard encompasses quality standard of ISO9000 and HACCP. Through the ambidexterity of exploitation and exploration (Non Standard Product Inspection) NOSPI machine, the company improvement generates the achievement of 75% automation, 99.997% quality control standard and 80% of waste reduction.

  17. Innovation, regional development and relations between high- and low-tech industries

    DEFF Research Database (Denmark)

    Hansen, Teis; Winther, Lars

    2011-01-01

    The current European policy agenda strongly accentuates the importance of research and development (R&D) as a driver of economic growth. The basic assumption is that high European wage levels make it unlikely that less research-intensive parts of the economy can withstand competition from low......-wage countries with increasingly skilled labour forces. Thus, the inferior growth of the European Union (EU) in the 1990s compared with the USA has been explained by the latter’s higher rate of R&D investments. The paper challenges this rather simplistic view of innovation and examines the regional consequences...... of such policies. EU growth has caught up with that of the USA during recent years and low-tech industries continue to have considerable economic importance in Europe in terms of jobs and value added, especially outside the main growth regions, but also in the major urban regions. Empirical evidence from Denmark...

  18. R&D Cooperation and Knowledge Spillover Effects for Sustainable Business Innovation in the Chemical Industry

    Directory of Open Access Journals (Sweden)

    Petr Hájek

    2018-04-01

    Full Text Available This paper investigates the influence of research and development (R&D cooperation on the creation of spillover effects for sustainable firms in the chemical industry. We explore the evidence for the origin of knowledge spillovers derived from cooperation amongst firms and universities and R&D organizations as well as to test the influence of internal/external financial support on these effects. The results confirm that when firms acquire knowledge from internal sources, this leads to increased innovation and sustainable performance. We have proved that internal expenditure results in increased internal knowledge spillovers. These findings may be specific for Central and Eastern (CEE transition countries, indicating their efforts to build path-dependent structures based on knowledge institutions and businesses as well as knowledge networks. However, this study also provides a more “global” contribution to the knowledge spillover effect theory. It shows that a firm’s cooperation both with universities and with other firms promotes different types of knowledge spillovers and can affect diverse modes of sustainable activities in innovation.

  19. Performance Improvement Through The Innovation And Competency Of Tanoker And Batik Creative Industry In Jember

    Directory of Open Access Journals (Sweden)

    Purnamie Titisari

    2017-10-01

    Full Text Available The objectives of this research are a to analyze the model of the optimization of the empowerment and performance improvement of Small and Medium Enterprises SMEs by identifying and analyzing the external and internal conditions human resource capability new product development capability and production and operation capability b to analyze the competency level that consists of knowledge skills and abilities of the human resources of the SMEs and c to examine the effect of internal and external factors and human resource competencies on the innovation capability and performance of the SMEs. The population of this study was all SMEs workers or craftsmen in the creative industry center located in Jember that consisted of 30 persons from SumberJambe Batik and 20 persons from Tanoker. Census sampling was applied in this research. Data were analyzed by using Partial Least Square PLS. Results show that most respondents agree and give positive assessment on the external factors of the SMEs of SumberJambe Batik and Tanoker. Most respondents also give positive evaluation on the level of human resource competency of the SMEs that consists of knowledge skills and abilities. The competency factor of human resources has a positive effect on the innovation capability of the employee. Thus the hypothesis which states that internal factors external factors and human resources competency positively affect the performance of SumberJamber Batik and Tanoker in Jember is accepted.

  20. Adapting the design of Anesthesia Information Management Systems to innovations depicted in Industrial Property documents.

    Science.gov (United States)

    Spyropoulos, B; Tzavaras, A; Zogogianni, D; Botsivaly, M

    2013-01-01

    The purpose of this paper is to present the design and the current development status of an Anesthesia Information Management System (AIMS). For this system, the physical and technical advances, depicted in relevant, recently published Industrial Property documents, have been taken into account. Additional innovative sensors create further data-load to be managed. Novel wireless data-transmission modes demand eventually compliance to further proper standards, so that interoperability between AIMS and the existing Hospital Information Systems is being sustained. We attempted to define, the state-of-the-art concerning the functions, the design-prerequisites and the relevant standards and of an "emerging" AIMS that is combining hardware innovation, real-time data acquisition, processing and displaying and lastly enabling the necessary interoperability with the other components of the existing Hospital Information Systems. Finally, we report based on this approach, about the design and implementation status, of our "real-world" system under development and discuss the multifarious obstacles encountered during this still on-going project.

  1. Performance Marketing Model through Acculturation Innovation and Market Orientation in the Bakery Industry

    Directory of Open Access Journals (Sweden)

    Sutarlan SULISTIYANI

    2017-04-01

    Full Text Available Small and Medium Enterprises (SMEs have their own superiority in which they pervade not only in terms of human resources, but also in their role in national economic development. The aim of this study is to develop acculturation innovation and competing superiority for increasing the marketing development of the bakery business actors in Central Java. This study’s sample consists of 161 respondents who are bakery business owners from Central Java. By using the purposive sampling technique, several criteria were considered for the SMEs representatives from the bakery industry sample, such as the SMEs must be certified at Disperindag, have at least one employee, and invest at least IDR 1.000.000,- . The analyzing method that is used in this study is SEM. The result of the study shows the market orientation with specific dimensions, such as gaining information about the customers’ needs, competitors’ powers, and functions’ coordination affected competitors’ superiority, and acculturation innovation. While it comes to some dimensions such as changes in culture-based products, culture-based price’ changing, culture-based packaging, and production processes, competing superiority is affected.

  2. Innovation-enabling policy and regime transformation towards increased energy efficiency: The case of the circulator pump industry in Europe

    DEFF Research Database (Denmark)

    Ruby, Tobias Møller

    2015-01-01

    When new energy efficient products are struggling with their commercialisation and diffusion into widespread applications you would typically expect policy-makers and green lead-users to guide the way. This paper examines the case of the hot water circulator pump industry in Europe, where parts...... of the industry envisioned and worked for a voluntary energy label, bringing technological innovation, new business and energy savings of approx. 85% for each new circulator pump. The case study explores the complexities of innovation processes where technology, market, actors and policy co-evolve over time...

  3. Knowledge management in industrial districts as support of innovation. Proposal of a metrologic based on Strelnet model

    International Nuclear Information System (INIS)

    Exposito Langa, M.; Capo Vicedo, J.; Masia Buades, M.

    2007-01-01

    One of the major challenges of endogenous development resides in how to improve the competitiveness of a territory. By fomenting innovation in industrial districts, one can give rise to strategic value capable of promoting competitive advantages and, at the same time, makes possible for greater sustainable development of the territory. To innovate implies making knowledge a key element; therefore those tasks that are dedicated to the management and incorporation of new knowledge in organizations will be fundamental in this process. Following this line, this research paper presents a methodology that helps with the management of knowledge in industrial districts. (Author) 36 refs

  4. Colloquium on the stakes and new realities of renewable energies

    International Nuclear Information System (INIS)

    2001-01-01

    Today, renewable energies represent 23% of the French energy production and should become a real advantage to overcome the greenhouse effect stakes and to optimize the durable development policy. This book brings together the interventions of the different participants to this colloquium on renewable energies. The following aspects were covered: how to make renewable energies profitable in the framework of an industrial facility; which specific renewable energy models would allow to overcome the greenhouse effect stake; how emission permits can incite to the use of renewable energies and reduce the pollution tax amount; how to take advantage of the new wastes valorization techniques in the rationalization of energy expenses; advantages and limitations of renewable energies in the on-site energy optimization; opportunities and stakes of the climate risk for renewable energies; last developments of the national regulatory framework applicable to renewable energies; status and perspectives of the European directive project on renewable energies; the suitability of renewable energies with respect to the energy needs of the industry and tertiary sectors; how to insert renewable energies in a durable development policy; how to exploit the diversity of renewable energies in order to maximize their economical and environmental potentialities; how to integrate the solar thermal and photovoltaic energies in the framework of a global environmental policy. (J.S.)

  5. Innovation

    OpenAIRE

    2012-01-01

    Présenté par FutuRIS, plate-forme prospective sur la recherche, l’innovation et la société animée par l’Association Nationale de la Recherche et de la Technologie, ce volume livre un panorama du système français de recherche et d’innovation dans son environnement européen. Sont abordés dans une première partie les champs décisionnels concernés, les politiques nationales menées en matière de R&D, les relations entre enseignement supérieur et recherche et l’Espace européen de la recherche à l’h...

  6. INNOVATION

    DEFF Research Database (Denmark)

    Helms, Niels Henrik

    2012-01-01

    Kravet om innovation og kreativitet er på flere måder en stor og en ny udfordring for voksenuddannelserne. Det udfordrer det didaktiske dilemma, det at vi skal gøres til kompetente og frie mennesker gennem pædagogiske handlinger, som netop pålægger os en ufrihed. – Men hvor denne ufrihed tidligere...... kunne begrundes med, at skolen eller uddannelsen vidste bedre, så er det ikke længere tilfældet. Skolen skal sørge for, at vi lærer noget – og ikke noget andet. Men det kan ikke længere med bestemthed afgøres, hvad det er vi skal lære i skolen, fordi det nye, det kreative og ikke mindst innovative...

  7. Commercial development of environmental technologies for the automotive industry towards a new model of technological innovation

    Energy Technology Data Exchange (ETDEWEB)

    Clark, W.W. II [Office of Planning and Research, Sacramento, CA (United States); Paolucci, E. [Politecnico di Torino University (Italy). Production and Economics Dept.

    2001-07-01

    Economic importance of environmental issues is increasing, and new technologies are expected to reduce pollution derived both from productive processes and products, with costs that are still unknown. Until now there is still little knowledge concerning the process of technological innovation in this field. What does exist, is outdated due to rapid change in technology. In this paper we analyse the development of Zinc Air Fuel Cells (ZAFC) and their transfer from research laboratories to large mass production. ZAFC are a new environmental technology, proved to have a commercial value, that can be used for building Zero Emission Vehicles (ZEV). Although ZAFC performances are higher than traditional lead-acid batteries ones, difficulties in funding ZAFC engineering and moving them from laboratories to production caused some years delay in their diffusion. On the bases of this paradigmatic case, we argue that existing economic and organizational literature concerning technological innovation is not able to fully explain steps followed in developing environmental technologies. Existing models mainly consider adoption problems as due to market uncertainty, weak appropriability regime, lack of a dominant design, and difficulties in reconfiguring organizational routines. Additionally, the following aspects play a fundamental role in developing environmental technologies, pointing out how technological trajectories depend both on exogenous market conditions and endogenous firm competencies: 1 regulations concerning introduction of ZEV create market demand and business development for new technologies; they impose constraints that can be met only by segmenting transportation market at each stage of technology development; 2 each stage of technology development requires alternative forms of division and coordination of innovative labour; upstream and downstream industries are involved in new forms of inter-firm relationships, causing a reconfiguration of product architecture

  8. Focussing innovation strategy for sustainability with the chemical industry as example

    NARCIS (Netherlands)

    John J. Hageman; Dr. ir. Jan Venselaar

    2007-01-01

    To make sustainable management and innovation attractive for companies, they need focus. In particular SME's don't have a clear view on where innovation should be aimed at in relation to sustainability. It just seems too complex. At the same time innovation suffers from the 'innovation paradox':

  9. The strategy of innovation and investment activity of the integrated agro-industrial enterprises

    OpenAIRE

    LYTNEVA N.A.; GONCHAROV P.V.; KYSHTYMOVA E.A.

    2015-01-01

    In this article reveals the relevance of research to improve the system of strategic planning of innovation and investment activity in the agricultural enterprise, types of planning innovative-investment activity of agrarian enterprises, software-oriented model of strategic planning of innovation and investment activities of AIC, the evaluation criteria of innovation and investment activity of agricultural enterprises.

  10. Proceedings of the Indian Analytical Science Congress: analytical science for innovations in green energy, technology and industry - souvenir

    International Nuclear Information System (INIS)

    2013-01-01

    The theme of IASC - 2013 is 'Analytical Science for innovations in Green Energy, Technology and Industry'. This theme was chosen to emphasize the unprecedented opportunities for analytical science and technology in the field of green energy, technology and industry, while at the same time recognizing the special challenges faced by analytical science in this field. The objective of the conference is to advance research, development and innovation in analytical sciences for the benefit of its application in the areas of green science and technology. The growing role of analytical science in green energy, technology and industry are significant. The next few years will witness more momentous achievements of analytical science as well as its application in green energy, technology and industry contributing towards the benefit of mankind in terms of healthy, productive, long and comfortable life. Papers relevant to INIS are indexed separately

  11. ENTREPRENEURIAL INNOVATION IN TRADITIONAL WEAVING CRAFTSMEN DESIGNED BATIK FOR IMPROVING THE TOURISM INDUSTRY IN KLATEN

    Directory of Open Access Journals (Sweden)

    Sri Murni

    2011-12-01

    Full Text Available The target of this study is to improve skilled knowledge and attitude worker of weave fasten as that self-supporting as according to potency and also opportunity work at industrial company, which is on finally can improve the quality of its life. Special target of this study give the knowledge of entrepreneurship among worker of weave fasten so that have high job ethos and also can yield pre-eminent masterpieces capable to compete in global market. The implementation take place to start 16 July until 23 July 2010, what consist of three phase that is activity early stage cover preparation phase, middle phase of activity which phase execution of training and also final phase of activity covering phase handling of post training. This training assign value added because there is skilled of batik design innovation at weave fastens affecting at make-up of production addition. The next study shall earn to measure effectiveness of “transfer training” on so that will be able to know how far done training can alter behavior of educative participant plunging in corporate world and industrial world and also trying self-supporting.

  12. Innovation networks in young branches of industry. Formation, morphology and implications for corporate strategy investigated for the example of the German photovoltaic industry.; Innovationsnetzwerke in jungen Branchen. Formation, Morphologie und unternehmensstrategische Implikationen am Beispiel der deutschen Photovoltaikbranche

    Energy Technology Data Exchange (ETDEWEB)

    Seemann, Mareike

    2012-07-01

    It is shown that innovation is regarded as a central success factor in tackling challenges of the future. Especially in high-wage regions such as Germany companies find themselves in a fierce innovation competition marked by growing challenges at the global level and the growing dynamism of innovation processes. Young industries are typically faced with much uncertainty in regard to strategy and technology, presenting their individual companies, most of them small and young themselves, with the challenge of having to rely on limited resources to develop innovative products, services and processes and launch them on the market. This provides the backdrop to the present dissertation, which inquires into the factors that determine the success of cooperative innovation projects in young branches of industry. Using the German photovoltaic industry as an example, the study empirically determines major determinants of success of joint innovation projects in young industries and derives recommendations for action for the management of companies and innovation networks.

  13. Promoting Profit Model Innovation in Animation Project in Northeast Asia: Case Study on Chinese Cultural and Creative Industry

    Directory of Open Access Journals (Sweden)

    Hao Jiao

    2017-12-01

    Full Text Available Building on a case study of three animation companies in the Chinese cultural and creative industry, this study aims to understand how profit model innovation is promoted. Due to the rapidly changing environments and resource scarcity, cultural and creative companies need to select the appropriate profit model according to their own key resources. The study uncovers two critical factors that promote profit model innovation in animation projects: the quantity of consumers and their consumption intention. According to these two dimensions, the authors’ analysis shows profit model innovation in animation projects can be divided into Fans mode, Popular mode, Placement mode, and Failure mode, respectively. This study provides an empirical basis for advocating profit model innovation and discusses the resource requirements of Fan mode, Popular model, and Placement mode in China’s cultural and creative industry. The authors’ research also has managerial implications that might help firms promote profit model innovation. Finally, learning and promoting the profit model of China’s animation industry in the Northeast Asia area will be conducive to Northeast Asia’s cooperation and sustainable development.

  14. The Triple Helix Model as an Effective Instrument for the Innovation Development of Industrial Enterprises within the National Economy

    Directory of Open Access Journals (Sweden)

    M. N. Dudin

    2014-06-01

    Full Text Available In the context of the transformation of the economies of developed countries towards a new type – knowledge economics – there has emerged the need for the creation and development of effective mechanisms for producing and commercializing knowledge based on the coordination of state, corporate, and academic interests. The subject of the article is topical, since innovation infrastructure is a fundamental factor in innovation development, and its development is a priority focus area in the state’s economic policy. In an era of transformations in the practice of production and knowledge transfer, it is important to analyze the links between theoretical knowledge and industrial information. The article provides a rationale for the fact that the model for the innovation development of industry (the Triple Helix Model, thanks to the multitude of entities engaged in innovation activity and the building of an extensive horizontally structured network, into which the elements of the “triple helix” are integrated, is capable of ensuring a synergistic effect and, consequently, is an effective instrument for boosting the innovation development of industry.

  15. Does the regulation of the insurance industry have a pernicious effect on innovation by the sector in South Africa?

    Directory of Open Access Journals (Sweden)

    Elton Zingwevu

    2015-07-01

    Full Text Available Financial regulation could be a double edged sword in that despite its major thrust being that to secure the financial sector and bring about financial stability; it might have the unintended consequence of stifling innovation by the sector. We investigate the nexus between financial regulation and innovation by specifically focusing on the insurance industry in South Africa. We demonstrate that there are plethora pieces of legislation that govern the insurance industry in South Africa. As such this has driven the cost of compliance to unsustainable levels thereby curtailing the spending by companies on innovation. We thus would like to caution the policy makers’ that this “heavy-touch” regulatory mode is having a pernicious effect on research and development by the insurance sector. As such we encourage them to embrace the “light-touch” regulatory mode whereby self-regulation and moral suasion are other avenues to be considered.

  16. Financial Constrains for Innovative Firms: The Role of Size, Industry and ICT Uses as Determinants of Firms' Financial Structure

    Science.gov (United States)

    Castillo-Merino, David; Vilaseca-Requena, Jordi; Plana-Erta, Dolors

    This paper uses a large and original data set of Catalan firms in all the economic branches to analyse the effects of size, industry and degree of ICT uses on financial constraints for innovative firms. We have conducted a micro econometric analysis following Henry et al. (1999) investment model to empirically contrast the relationship between firms' investment spread over time and their financial structure, and we have used von Kalckreuth (2004) methodology, based on an original survey with data on financial issues. Our results show that it exits a positive and significant relationship between investment shift and financial structure, emerging financial constraints for more innovative firms. Furthermore, these constraints are higher for micro companies and firms within the knowledge-advanced services' industry. Finally, we have also found that advanced ICT uses by more innovative firms allow them to reduce constraints of access to sources of finance.

  17. Development of the System of Investment Support of Projects in the Industrial-Innovative Development of Kazakhstan

    Science.gov (United States)

    Doskaliyeva, Bayan B.; Orynbassarova, Yerkenazym D.; Omarkhanov?, Zhibek M.; Karibaev, Yerkebulan S.; Baimukhametova, Ayagul S.

    2016-01-01

    The purpose of this study is to determine specific features of investment regulation mechanism aimed at providing effective implementation of projects in the context of industrial-innovative development of Kazakhstan. There the used the system of general scientific and special research methods providing the possibility to disclose processes and…

  18. Industrial Ph.D. Programs for the Strengthening of the Industry’s Production of Innovation in Colombia

    Directory of Open Access Journals (Sweden)

    Jorge Celis

    2016-09-01

    Full Text Available Today’s firms face a new global economy powered by knowledge rather than physical resources and natural raw materials. Universities are crucial actors in ensuring economic development, not only by training highly qualified human capital, but also by producing new knowledge with innovation potential. University–industry research collaborations (UICs have been increaingly recognized as an innovation mode. Highly qualified people, mainly at Ph.D. level, are fundamental for the increase of the knowledge pool from which firms and society as a whole can benefit in terms of the production of innovation. The demand for more specialized researchers in business/industry has led to new versions of doctoral programs, such as Industrial Ph.D. Programs (IPPs, which are well-established in a number of countries. After using an analytical international and comparative education methodology, we have found that the cooperation with industry to develop Ph.D. programs in Colombia is relatively weak and requires to be enhanced. In this paper, we argue for the alignment of the so-called third academic mission of economic development with the traditional academic missions of teaching and research through the implementation of IPPs as a mechanism for strengthening the innovation process of firms and country’s economic growth.

  19. Development of the System of Innovation: the Establishment of the Aircraft Industry in the Central Administrative Region (SP.

    Directory of Open Access Journals (Sweden)

    Fernando Bueno de Oliveira

    2015-01-01

    Full Text Available The article intends to show the establishment of the aircraft industry in the Central Administrative Region (SP, in the last seven years, which introduced a new element in the economical structure of the region. Based on the innovation systemic approach , the objective is to identify and characterize the investments related to the aircraft industry segment carried out in the region and to identify the potentialities of the new production geographical axle and aircraft's maintenance for a dynamic setorial insertion, given by the capacity of integration to innovation system related to the aircraft industry. Some qualitative information was obtained from primary (questionnaires and secondary sources. For the analysis, all the information was organized taking into consideration the most important aspects of the innovation activities according to the Oslo Manual. Technology and efficient staff are the strategic factors to this type of industry. Based on these requirements, they have potentialities in the Central Administrative Region (CAR for a possible insertion in the innovation system: (i the favorable institutional environment concerning the education system, availability and training of human qualified resources, which demonstrated fast structuring capacity seeking to attend a new demand that appeared in the region; (ii Technology & Science infrastructure.

  20. Innovation strategy management survey of the Chilean biomedical industry. Assessment of windows of opportunities to reduce technological gaps.

    Science.gov (United States)

    Bas, Tomas Gabriel; Oliu, Carolina Alejandra

    2018-04-01

    The convergence of different theories (ie, catch-up effect and windows of opportunities) allows for the interpretation of different "technological innovation gaps" in Chile's biomedical industry. It is common knowledge that Chile has always had an economy almost exclusively based on services, commodities, and mainly in the exploitation of natural resources with low value added. The literature confirms that countries that concentrate their economies on the knowledge, research, development, and commercialization of technology and innovation have a better and more stable growth rate in the medium and long run. The "Asian Tigers" are a good example of this. Analyzing the technological gaps that affect the Chilean biomedical industry, it is possible to find windows of opportunities to catch up. This could allow the country to take its knowledge, skills, and capabilities further, thus enabling Chile to not just depend on its unpredictable natural resources. For the first time, a quantitative diagnosis of the Chilean biomedical industry was made. This study considered the Chilean biomedical industry and its innovation and entrepreneurship environment, taking into account its productive capacities and its potential to make progress in technological innovation and, as a result, dramatically reducing technological gaps through windows of opportunities. Copyright © 2018 John Wiley & Sons, Ltd.

  1. Factors That Lead to Environmentally Sustainable Practices in the Restaurant Industry: A Qualitative Analysis of Two Green Restaurant Innovators

    Science.gov (United States)

    Nyheim, Peter

    2012-01-01

    In recent years, more organizations, including restaurants, have concerned themselves with sustainability. As with any new endeavor, guidance is needed. The purpose of this study was to investigate factors that lead to environmentally sustainable practices in the restaurant industry. Using Rogers' Diffusion of Innovation Theory as a…

  2. Assessment of the Impact of Globalization on the Introduction of Innovative Technology Companies in the Hospitality Industry

    Science.gov (United States)

    Zaitseva, Natalia A.; Larionova, Anna A.; Yumatov, Konstantin V.; Korsunova, Natalia M.; Dmitrieva, Nina V.

    2016-01-01

    The importance and relevance of the study of the globalization effects on the introduction of innovative technologies in the hotel industry is difficult to overestimate, as only those hotels that are able to change with demographic, technological and economic changes, and to adapt to occurring changes, will be able to succeed. The aim of this work…

  3. Innovative business cases in the South Africa table grape and wine industry's: developing the concept op empowerment entrepreneurship

    NARCIS (Netherlands)

    Ras, P.J.; Vermeulen, W.J.V.

    2012-01-01

    The purpose of this paper is to reflect on an innovative initiative taken spontaneously by producers in the supply chain of the table grapes and wine industry to empower employees. Empowerment is a fundamental force for change in doing business in South Africa and its societies, especially in

  4. Role of University-Industry-Government Linkages in the Innovation Processes of a Small Catching-Up Economy

    Science.gov (United States)

    Varblane, Urmas; Mets, Tonis; Ukrainski, Kadri

    2008-01-01

    During the transformation process from a command economy, the extraordinary statist university-industry-government (UIG) linkages model was replaced by an extreme version of laissez-faire relationships. A more modern interaction-based UIG model could be implemented only by changing the whole national innovation system of catching-up economies. The…

  5. Technology innovation and entrepreneurial state: the development of China's high-speed rail industry

    NARCIS (Netherlands)

    Sun, Z.

    2015-01-01

    China proactively promotes indigenous technology innovation towards developing an innovation-based economy. This contradicts the developmental state literature that puts emphasis on technology imitation. Drawn from the strategic entrepreneurship perspective, this article explores the role of the

  6. Organizational Culture, Absorptive Capacity, Innovation Performace and Competitive Advantage: An Integrated Assessment in Indonesian Banking Industry

    OpenAIRE

    Ahmad Adriansyah; Adi Zakaria Afiff

    2015-01-01

    The positive impact of absorptive capacity (ACAP) on innovation and the positive impact of innovation on competitive advantage have been proven in different research contexts. However, current knowledge on organizational culture that affects ACAP, innovation and competitive advantage as a whole, remains unclear. This article proposes a model to examine how organizational culture (developmental culture and rational culture) affects ACAP, innovation and competitive advantage, directly and indir...

  7. Small Stakes Risk Aversion in the Laboratory

    DEFF Research Database (Denmark)

    Harrison, Glenn W.; Lau, Morten; Ross, Don

    Evidence of risk aversion in laboratory settings over small stakes leads to a priori implausible levels of risk aversion over large stakes under certain assumptions. One core assumption in standard statements of this calibration puzzle is that individuals define utility over terminal wealth......, and that terminal wealth is defined as the sum of extra-lab wealth and any wealth accumulated in the lab. This assumption is often used in Expected Utility Theory, as well as popular alternatives such as RankDependent Utility theory. Another core assumption is that the small-stakes risk aversion is observed over...... all levels of wealth, or over a “sufficiently large” range of wealth. Although this second assumption if often viewed as self-evident from the vast experimental literature showing risk aversion over laboratory stakes, it actually requires that lab wealth be varied for a given subject as one takes...

  8. Research and innovation to overcome the 'barriers'. The technological and industrial challenges of carbon-free energy

    International Nuclear Information System (INIS)

    Therme, Jean

    2011-01-01

    The world energy scene has undergone a thoroughgoing change in less than twenty years. It is ready for a new revolution based on the massive introduction of renewable energy sources along with the associated technology and, also, on ever smarter energy networks for managing supply and demand. As industrial and economic competition intensifies, innovation will be a key factor for winning this battle. Given its worldwide industries and topnotch research centers, France has a few aces up its sleeve. The country has to focus on industrial chains of production, research and innovation; and choose to back those of excellent quality that will help make it a world leader. The examples of photovoltaic conversion and batteries are cited, two fields that France must continue supporting and developing

  9. The effects of inter-industry and country difference in supplier relationships on pioneering innovations

    DEFF Research Database (Denmark)

    Li, Ying; Vanhaverbeke, Wim

    2009-01-01

    Innovations are critical driving forces for firms to engage in corporate growth and new business development. Innovating firms are increasingly generating new knowledge in collaboration with partners. In this paper, we analyze how the knowledge differences between the innovating firms and their s...... external knowledge sources but also to find suppliers from the same or nearby countries for the sake of communication and coordination....

  10. Cluster as a Tool to Increase the Competitiveness and Innovative Activity of Enterprises of the Defense Industry Complex

    Directory of Open Access Journals (Sweden)

    Katrina B. Dobrova

    2017-01-01

    Full Text Available Purpose: the main goal of the publication is to make a comprehensive study of the possible application of the cluster approach to improve the competitiveness and innovation activity of enterprises of the defense industry complex.Methods: the methodology of the research is based on the collection and analysis of initial data and information, the article uses a systematic approach to the study of socio-economic processes and phenomena. The research is based on modern theory of competition, innovation, as well as the modern paradigm of cluster development of the economy. In preparing the study, practical materials from Corporation “Rostec”.Results: the article gives the notion of cluster, the prospects for the use of the cluster approach to enhance competitiveness and innovation enterprises of the military-industrial complex. It is noted that the activation of interaction with the “civil sector” is particularly relevant in the context of the reduction of the state defense order, and the theory and practice of cluster management offers a number of forms of cluster interaction between the enterprises of the defense industry and the civil sector. It is emphasized that the development of cluster mechanisms can solve a number of problems related to the insufficient financial stability of defense industry enterprises in the context of a reduction in the state defense order, low innovation activity and the lack of developed models of interaction with small innovative enterprises. Ultimately, the use of cluster mechanisms in the development of defense enterprises is intended to enhance the competitiveness of the complex, both nationally and globally. It is stated that the existing clusters are not able to fully solve a number of specific tasks related to the diversification of integrated defense industry structures. Attention is drawn to the fact that existing clusters are not able to fully solve a number of specific tasks related to the

  11. How to create innovation by building the translation bridge from basic research into medicinal drugs: an industrial perspective.

    Science.gov (United States)

    Germann, Paul G; Schuhmacher, Alexander; Harrison, Juan; Law, Ronald; Haug, Kevin; Wong, Gordon

    2013-03-05

    The global healthcare industry is undergoing substantial changes and adaptations to the constant decline of approved new medical entities. This decrease in internal research productivity is resulting in a major decline of patent-protected sales (patent cliff) of most of the pharmaceutical companies. Three major global adaptive trends as driving forces to cope with these challenges are evident: cut backs of internal research and development jobs in the western hemisphere (Europe and USA), following the market growth potential of Asia by building up internal or external research and development capabilities there and finally, 'early innovation hunting' with an increased focus on identifying and investing in very early innovation sources within academia and small start-up companies. Early innovation hunting can be done by different approaches: increased corporate funding, establishment of translational institutions to bridge innovation, increasing sponsored collaborations and formation of technology hunting groups for capturing very early scientific ideas and concepts. This emerging trend towards early innovation hunting demands special adaptations from both the pharmaceutical industry and basic researchers in academia to bridge the translation into new medicines which deliver innovative medicines that matters to the patient. This opinion article describes the different modalities of cross-fertilisation between basic university or publicly funded institutional research and the applied research and development activities within the pharmaceutical industry. Two key factors in this important translational bridge can be identified: preparation of both partnering organisations to open up for new and sometime disruptive ideas and creation of truly trust-based relationships between the different groups allowing long-term scientific collaborations while acknowledging that value-creating differences are an essential factor for successful collaboration building.

  12. A Balanced Scorecard for Open Innovation: Measuring the Impact of Industry-University Collaboration

    Science.gov (United States)

    Flores, Myrna; Al-Ashaab, Ahmed; Magyar, Andrea

    The Balanced Scorecard (BSC) can be considered as a strategic measurement tool. Since its first publication by Norton and Kaplan in the early 1990’s, many companies have applied it to measure four key aspects of their organisations’ performance: Financial, Customer, Internal Business Process, Learning and Growth. Although it is widely used in the business arena, this original BSC was not developed to assess the impact of collaborative research projects under an open innovation strategy, where the outputs of research and development (R&D) developed by collaborative projects undertaken by industry and universities should be measured in a different way. In fact, many companies are losing important opportunities to spur their R&D results by not being able to quantify the results of such collaborations. Therefore, this paper will propose a Scorecard to measure the outcomes of collaborative research. It is important to recall that this scorecard has been developed during a collaborative research project by CEMEX Research Group AG (Switzerland) and Cranfield University (UK). During such project, a survey was developed to carry out eleven face-to-face interviews in a sample of ten companies in UK, which provided important inputs to design such strategic scorecard. It was confirmed that a collaborative balanced scorecard is a very useful tool to measure, track and improve the impact of conducting collaborative projects with universities.

  13. Tracing the transition path between optimal strategies combinations within a competitive market of innovative industrial products

    Science.gov (United States)

    Batzias, Dimitris F.; Pollalis, Yannis A.

    2012-12-01

    In several cases, a competitive market can be simulated by a game, where each company/opponent is referred to as a player. In order to accommodate the fact that each player (alone or with alliances) is working against some others' interest, the rather conservative maximin criterion is frequently used for selecting the strategy or the combination of strategies that yield the best of the worst possible outcomes for each one of the players. Under this criterion, an optimal solution is obtained when neither player finds it beneficial to alter his strategy, which means that an equilibrium has been achieved, giving also the value of the game. If conditions change as regards a player, e.g., because of either achieving an unexpected successful result in developing an innovative industrial product or obtaining higher liquidity permitting him to increase advertisement in order to acquire a larger market share, then a new equilibrium is reached. The identification of the path between the old and the new equilibrium points may prove to be valuable for investigating the robustness of the solution by means of sensitivity analysis, since uncertainty plays a critical role in this situation, where evaluation of the payoff matrix is usually based on experts' estimates. In this work, the development of a standard methodology (including 16 activity stages and 7 decision nodes) for tracing this path is presented while a numerical implementation follows to prove its functionality.

  14. Innovation Management Practices, Strategic Adaptation, and Business Results: Evidence from the Electronics Industry

    Directory of Open Access Journals (Sweden)

    Alba Sánchez

    2011-06-01

    Full Text Available This research contributes to the understanding of how different practices of innovation management are related to mid- and long-term growth and profitability. Governments and regional development agencies invest relevant budgets to foster innovation in small and medium enterprises (SMEs and improve their innovation management practices to make them more competitive. Nevertheless, it is not clear what impact these practices have on a company's performance over a long period of time. We propose a model to audit and classify innovation practices and empirically test the impact of innovation practices on the firms’ long–term financial performance, using a broad sample of companies in the electronics sector. Our empirical results show that, within a regional context, companies that are similar in terms of size, position in the value chain, and ownership structure follow similar innovative practices. Furthermore, the use of a systematic approach for innovation leads to revenue growth but does not necessarily increase profit or productivity.

  15. Peculiarities of state regulation of the Russian industrial corporations in the process of innovation development

    Directory of Open Access Journals (Sweden)

    K. Dobrova

    2015-01-01

    Full Text Available In this article the features of innovative development corporations in Russia and abroad. The article describes the main factors hampering the process of innovative development of Russian corporations. Defines the role of government programs as an important form of direct government financial support for innovation activities by corporations. Innovative development in the world is caused by the necessity of the continuous increase and retain the competitiveness of enterprises. This innovation enables businesses to compete effectively in the market, attract new customers, improve financial results. The degree of competitiveness of the enterprise is most significant depends on the technological level of the enterprise. In addition, you must take into account the depth of innovation processes in the enterprise, since the competitiveness of lead is not all innovations, but only those that are focused on new markets and accompanied by original.

  16. THE ECONOMICS AND MANAGEMENT OF INNOVATION IN TRAVEL AND TOURISM SERVICES: THE CASE OF EUROPEAN CRUISE INDUSTRY IN DUBAI

    Directory of Open Access Journals (Sweden)

    Emanuele Pizzurno

    2012-12-01

    Full Text Available Firms entering new markets face a difficult challenge: how to manage the innovation process to satisfy specific clients’ requests. In view of its geographical location and business friendly policies Dubai has become the gateway between East and West. Thus, European travel & tourism industry predicts business development. Prior research suggests that managers should consider religious factors to avoid strategic drift. In this paper we explore what kind of innovations should be introduced in travel service to comply with specific clients. We argue that after a long period of strategic and market analysis, the very affected conceptual step is "service development and market testing". Our arguments are supported by empirical analysis.

  17. Radical university-industry innovation – research design and preliminary findings from an on-going qualitative case study

    DEFF Research Database (Denmark)

    Gertsen, Frank; Nielsen, René Nesgaard

    and it is arguing that there is a lack of in-depth understanding of such collaborative radical innovation processes. The paper then suggests an abductive research design for an explorative in-depth case study of collaborative radical innovation involving a university and an established Danish manufacturing firm....... Some preliminary findings are presented and briefly discussed, including the role of the university’s formal set-up to deal with IPR/commercialisation and the researchers’ personal networking with industry as well as challenges concerning the sharing of IPR/commercialisation outcomes....

  18. A stake in the business.

    Science.gov (United States)

    Sullivan, Chris T

    2005-09-01

    When Chris Sullivan and three friends opened the first Outback Steakhouse in March 1988, in Tampa, Florida, they were hoping it would be successful enough to spawn a few more and maybe some other kinds of restaurants as well. Since then, their chain of Australia-themed restaurants has grown to some 900 locations and counting-plus another 300 or so "concept" restaurants that operate from under Outback's corporate umbrella. Growth like that doesn't happen accidentally, Sullivan says, but it certainly wasn't part of the original plan. In this first-person account, Outback's chairman describes the organization's formula for growth and development, which is consciously rooted in the founders' belief in putting people first. They've created an organizational model in which field managers make most of the decisions, garner the rewards, and live with the consequences. Specifically, the founders believe that the most effective way to make customers happy is to first take care of the people who cook for them, serve them, and supervise operations at the restaurants. Outback servers have fewer tables to worry about than those at other restaurant chains; the cooks have bigger, cooler, better-equipped kitchens; and the supervisors work their way up the ranks toward an equity stake in the restaurant or region they run. There are no administrative layers between field managers and the executives at headquarters. Giving employees good working conditions and the chance to become owners has proved to be good business: Turnover among hourly employees is low, and Outback and its subsidiaries opened 120 restaurants last year, increasing sales by 20.1%. The company must grow in order to keep offering career opportunities to its workers; in turn, those opportunities ensure that Outbackers remain committed to making customers happy and the company successful.

  19. Knowledge translation in tri-sectoral collaborations: An exploration of perceptions of academia, industry and healthcare collaborations in innovation adoption.

    Science.gov (United States)

    Ii, Suzanne Sayuri; Fitzgerald, Louise; Morys-Carter, Megan M; Davie, Natasha L; Barker, Richard

    2018-02-01

    With the aging population and increase in chronic disease conditions, innovation to transform treatment pathways and service delivery will be necessary. The innovation adoption process however, can take 15 years before widespread adoption occurs in most healthcare systems. Current UK government policies to increase the facilitation of innovation adoption are under way. The aim of this study is to explore perceptions of tri-sectoral collaborations in the healthcare sector. The data in the study are drawn from a cross-sectional survey conducted in 2015 of professionals in academia, industry and the healthcare sectors in England, focusing on Diabetes care. Academia and healthcare respondents had the least work experience outside of their sectors compared to the industry respondents. Healthcare and academia respondents rated the industry sector less trustworthy, unethical, having different goals and less understanding of the other sectors. Industry respondents had a more positive perspective towards potential collaborators. The results from the study demonstrate greater potential challenges to tri-sectoral collaborations and the government's knowledge translation policy, due to pre-conceived notions and lack of understanding of other sectors. The purely structural approach of establishing government mandated translational networks may be insufficient without active attempts to improve collaborative relationships. Mechanisms to facilitate trust building and collaboration are proposed. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

  20. Eco-innovation an evolution of innovation? Empirical analysis at the Spanish tile ceramic industry; Eco-innovacion, una evolucion de la innovacion? Analisis empirico en la industria ceramica espanola

    Energy Technology Data Exchange (ETDEWEB)

    Segarra-Ona, M.; Peiro-Signes, A.; Miret-Pastor, L.; Albors-Garrigos, J.

    2011-07-01

    Innovation and sustainable development are considered to be economic drivers and crucial in fixing competitive position of companies. Eco-innovation, known as a synergic relation among both concepts must be an element to consider when designing the company's strategy. The objective of this paper is to analyze which are the variables that determine that innovative companies go beyond and consider the improvement of their environmental impact as an output when developing innovating activities. This research considers firms belonging to the Spanish tile industry. Data has been provided by PITEC Database. The paper identifies the moderating factors that influence the eco-innovative behavior of firms. (Author)

  1. Proceedings of waste stream minimization and utilization innovative concepts: An experimental technology exchange. Volume 1, Industrial solid waste processing municipal waste reduction/recycling

    Energy Technology Data Exchange (ETDEWEB)

    Lee, V.E. [ed.; Watts, R.L.

    1993-04-01

    This two-volume proceedings summarizes the results of fifteen innovations that were funded through the US Department of Energy`s Innovative Concept Program. The fifteen innovations were presented at the sixth Innovative Concepts Fair, held in Austin, Texas, on April 22--23, 1993. The concepts in this year`s fair address innovations that can substantially reduce or use waste streams. Each paper describes the need for the proposed concept, the concept being proposed, and the concept`s economics and market potential, key experimental results, and future development needs. The papers are divided into two volumes: Volume 1 addresses innovations for industrial solid waste processing and municipal waste reduction/recycling, and Volume 2 addresses industrial liquid waste processing and industrial gaseous waste processing. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  2. The model and the planning method of volume and variety assessment of innovative products in an industrial enterprise

    Science.gov (United States)

    Anisimov, V. G.; Anisimov, E. G.; Saurenko, T. N.; Sonkin, M. A.

    2017-01-01

    In the long term, the innovative development strategy efficiency is considered as the most crucial condition for assurance of economic system competitiveness in market conditions. It determines the problem relevance of such justification strategies with regard to specific systems features and conditions of their operation. The problem solution for industrial enterprises can be based on mathematical models of supporting the decision-making on the elements of the innovative manufacturing program. An optimization model and the planning method of innovative products volume and variety are suggested. The feature of the suggested model lies in the nonlinear nature of the objective function. It allows taking into consideration the law of diminishing marginal utility. The suggested method of optimization takes into account the system features and enables the effective implementation of manufacturing capabilities in modern conditions of production organization and sales in terms of market saturation.

  3. The Role of Technical Innovation and Sustainability on Energy Consumption: A Case Study on the Taiwanese Automobile Industry

    Directory of Open Access Journals (Sweden)

    Chao-Wu Chou

    2015-06-01

    Full Text Available The impact of global warming and climate change is one of the most critical challenges of the 21st century. The greenhouse effect caused by technological development and industrial pollution has accelerated the speed of global warming. The continuous improvement in automobile energy consumption is one of the most effective ways to reduce global warming. A comparative analysis is proposed to examine the various automobiles that utilize technological innovation to improve their energy consumption. Their contribution to CO2 emissions is then investigated. This study focuses on technical innovation and output power of a conventional engine. The results indicate that innovative engines (such as the Ford turbo petrol/diesel engine, the EcoBoost/TDCi have improved energy consumption and reduce CO2 emissions. In addition, the Toyota hybrid vehicles have also improved energy consumption and reduced greenhouse gases emissions.

  4. Industrial innovation and intra sectoral and inter sectoral technology diffusion; Innovacion industrial y difusion tecnological intrasectorial e intersectorial

    Energy Technology Data Exchange (ETDEWEB)

    Serrano Domingo, G.; Cabrera Borras, B.; Requena Silvente, F.

    2012-07-01

    This paper examines whether sectoral backward and forward linkages can generate positive externalises in sectoral innovation through diffusion of technological knowledge, both across countries within a sector or across sectors within a country. Using a sample of 14 OECD countries and 12 sectors over the period 1995-2005 we find that forward linkages enhance sectoral innovation. Intra sectoral slipovers are important among sectors and countries with low-to-medium R an D intensity while inter sectoral slipovers have a major impact on sectors with high R and D intensity. (Author)

  5. Globalisation of Knowledge Production and Regional Innovation Policy: Supporting Specialized Hubs in the Bangalore Software Industry

    OpenAIRE

    Chaminade, Cristina; Vang, Jan

    2008-01-01

    This paper is concerned with the changing role of regional innovation systems and regional policies in supporting the transition of indigenous firms in developing countries from competing on low costs towards becoming knowledge providers in global value chains. Special attention is paid to policies supporting the emergence and development of the regional innovation system in this transition process. Regional innovation systems in developing countries have very recently started to be conceptua...

  6. Characterization of Brazilian Industrial Companies’ Processes and Challenges as to Innovation Management

    Directory of Open Access Journals (Sweden)

    Marcelo Seido Nagano

    2014-09-01

    Full Text Available The goal of this study is to investigate the use of product innovation management practices and the challenges faced by organizations when increasing their innovative performance. To this end, we analyzed the relationships between internal organizational elements, as well as the influence of contextual factors (size, field and source of capital in the characterization of innovation management systems and of barriers to innovation faced by each company. We chose this topic due to the fact that management processes that leverage innovative performance are not yet fully understood, and because of the lack of empirical studies that analyze the reality of the practices proposed in the organizational world, especially in Brazil. As a conceptual basis, we presented modern approaches to innovation, which recognize that this should not be seen as an isolated event but as a process. Exploratory qualitative research was carried out by means of a multiple case study. In it, we studied the innovation management systems of four companies which present relevant product development activities in Brazil. As well as a detailed study of the elements of innovation management, this article includes contributions referring to the characterization of organizational challenges faced by organizations when managing their innovation process.

  7. Macroeconomic, legal, administrative and cultural factors of technological innovations1 in Polish industrial enterprises

    Directory of Open Access Journals (Sweden)

    Stanisław Sudoł

    2016-12-01

    The vast majority of experts participating in the study positively assessed the cultural conditions of technological innovativeness in Polish enterprises. Experts also provided negative cultural characteristics of Poles.

  8. The Dynamics of the Regional Innovation around the Oil and Gas Industries: Cases of Stavanger and Aberdeen

    Directory of Open Access Journals (Sweden)

    Martin Gjelsvik

    2011-01-01

    Full Text Available This paper presents the IRIS and MIT comparative study of the two oil capitals in Europe: Aberdeen and Stavanger, in order to analyze two successful oil and gas clusters. The Norwegian innovation system would be presented in detail. The article also examines the intrinsic role between the universities and the industrial context in the regional innovation system.//Este artículo presenta el estudio comparativo entre las dos capitales petroleras de Europa, Aberdeen y Stavanger, realizado por IRIS y MIT, con el objetivo de analizar dos clusters exitosos de gas y petróleo. Se exhibe en detalle el sistema noruego de innovación. Asimismo, este artículo examina la relación intrínseca entre las universidades y el contexto industrial en el sistema regional de innovación.

  9. The Zodiak workshop: an innovative model for teaching financial management through partnership with industry.

    Science.gov (United States)

    Lloyd, James W; Frawley, Suzanne L; Neer, Charles A; Merle, Christine; Goebel, Richard

    2004-01-01

    The National Commission on Veterinary Economic Issues (NCVEI) is working to enhance the non-technical skills, knowledge, aptitudes, and attitudes (SKAs) of veterinarians. This report describes the development of an innovative model for teaching the principles of financial management as they apply to the veterinary practice. Zodiak: The Game of Business Finance and Strategy is a "business literacy" game in which players work together in small teams (generally four people) to run a fictional multi-million-dollar company called Zodiak Industries for three "years" in order to learn principles of business finance and strategy. After finishing the 4.5-hour game, participants spend the rest of the workshop making the right "Connections"-exercises designed to connect what they have learned to business strategies, financial statements, and operational tactics drawn from veterinary practice. Issues addressed for the veterinary practice, with parallels drawn to Zodiak, included return on owner investment in a veterinary practice (vs. salary drawn by owner veterinarians); pricing (setting prices, price elasticity of demand, and relationships between volume, quality, and price); human resources and operations management as they relate to profitability and efficiency; cash flow and management of accounts receivable; and commonly used financial benchmarks. Workshop venues have included Michigan State University, The Ohio State University, the University of Illinois, and Purdue University. Financial and in-kind support were provided through partnership with Pharmacia Animal Health (now Pfizer Animal Health) and Hill's Pet Nutrition, Inc. Through course evaluations, participants generally rated the workshop high as an educational experience and indicated that the most important things learned were related to financial management (principles, terminology, and methods). The most enjoyable aspects of the workshop tended to be group discussions, teamwork, the dynamic

  10. Open source projects as incubators of innovation: From niche phenomenon to integral part of the software industry

    OpenAIRE

    Schrape, Jan-Felix

    2017-01-01

    Over the last 20 years, open source development has become an integral part of the software industry and a key component of the innovation strategies of all major IT providers. Against this backdrop, this paper seeks to develop a systematic overview of open source communities and their socio-economic contexts. I begin with a reconstruction of the genesis of open source software projects and their changing relation- ships to established IT companies. This is followed by the identification of f...

  11. Innovation and energy. ECRIN day; Innovation et energie. Journee ECRIN

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    ECRIN is an association jointly created by the French atomic energy commission (CEA) and the French national center of scientific research (CNRS). It gathers experts from the research and industry worlds, representatives of institutions and decision making peoples in order to work on important topics like energy. This document gathers the working documents and transparencies presented at the ECRIN day on energy and innovation: opening talk of C. Birraux (head of the parliamentary office of evaluation of scientific and technological choices); the energy of seas (offshore wind power, wave energy, tide currents energy, thermal energy of seas, osmotic energy, tidal energy); synthetic fuels (stakes, possible options, Fischer-Tropsch synthesis, GTL, CTL, BTL, production with CO{sub 2} recycling); capture and geological sequestration of CO{sub 2}: a general overview (stakes, solutions, capture and sequestration, transport, geologic disposal, present day situation and perspectives); geothermal energy: new prospects (enhanced geothermal systems, hot-dry-rocks and hot fractured rocks, advances, cost, advantages and drawbacks); heat pumps and valorization of low temperature heat sources (space heating, district heating networks, heat pumps, artificial geothermal energy, low temperature water transport, thermal potentiality); heat and coldness storage and transport (use of intermittent energy sources, cogeneration, optimisation of processes, recovery of heat losses, CO{sub 2} capture, present-day situation, problems to be solved, integration of systems and processes); plastic photovoltaic solar cells (market, stakes, potentialities of organic materials for photovoltaic conversion, state-of-the-art, research in Europe and France, perspectives); conclusion of the Ecrin day (challenges, diversification of energy sources, energy efficiency, abatement of CO{sub 2} emissions, role of ECRIN). (J.S.)

  12. Biofuels: stakes, perspectives and researches; Biocarburants: enjeux, perspectives et recherches

    Energy Technology Data Exchange (ETDEWEB)

    Appert, O.; Ballerin, D.; Montagne, X.

    2004-07-01

    The French institute of petroleum (IFP) is a major intervener of the biofuels sector, from the production to the end-use in engines. In this press conference, the IFP takes stock of the technological, environmental and economical stakes of today and future biofuel production processes and of their impact on transports. This document gathers 2 presentations dealing with: IFP's research strategy on biofuels (transparencies: context; today's processes: ethanol, ETBE, bio-diesel; tomorrows processes: biomass to liquid; perspectives), bio-diesel fuel: the Axens process selected by Diester Industrie company for its Sete site project of bio-diesel production unit. The researches carried out at the IFP on biofuels and biomass are summarized in an appendix: advantage and drawbacks of biofuels, the ethanol fuel industry, the bio-diesel industry, biomass to liquid fuels, French coordinated research program, statistical data of biofuel consumption in France, Spain and Germany. (J.S.)

  13. Energy Efficient Industrialized Housing Research Program, Center for Housing Innovation, University of Oregon and the Florida Solar Energy Center

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G.Z.

    1990-01-01

    This research program addresses the need to increase the energy efficiency of industrialized housing. Two research centers have responsibility for the program: the Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. The two organizations provide complementary architectural, systems engineering, and industrial engineering capabilities. In 1989 we worked on these tasks: (1) the formation of a steering committee, (2) the development of a multiyear research plan, (3) analysis of the US industrialized housing industry, (4) assessment of foreign technology, (5) assessment of industrial applications, (6) analysis of computerized design and evaluation tools, and (7) assessment of energy performance of baseline and advanced industrialized housing concepts. The current research program, under the guidance of a steering committee composed of industry and government representatives, focuses on three interdependent concerns -- (1) energy, (2) industrial process, and (3) housing design. Building homes in a factory offers the opportunity to increase energy efficiency through the use of new materials and processes, and to increase the value of these homes by improving the quality of their construction. Housing design strives to ensure that these technically advanced homes are marketable and will meet the needs of the people who will live in them.

  14. The VET System and Industrial SMEs: The Role of Employees with VET Qualifications in Innovation Processes

    Science.gov (United States)

    Brunet Icart, Ignasi; Rodríguez-Soler, Joan

    2017-01-01

    Reforms of the vocational education and training (VET) system in Spain are committed to a closer relationship between the VET system and companies' needs. One of these needs is for a greater contribution of the VET system to innovation in companies, especially SMEs, which have limited resources to innovate. This contribution could materialise…

  15. Marketing activities to support ‘Moderately Novel’ product innovation: Insights from the chemical industry

    NARCIS (Netherlands)

    Smits, A.A.J.; Vissers, G.A.N.; Dankbaar, B.

    2015-01-01

    Scholars often follow a contingency approach to study which marketing activities are suitable for a particular type of product innovation project, thereby making a distinction between incremental and radical innovation only. ‘Moderately novel’ projects, which have intermediate levels of newness,

  16. Innovation in Enterprises in Process of Merge: a study of services and industry companies

    Directory of Open Access Journals (Sweden)

    Patricia Gonçalves Vidal

    2014-08-01

    Full Text Available The current article presents the innovation process in companies which have adopted as strategy the value creation and synergies through merger with other companies. From a theoretical foundation it aims to shed light on the theme by presenting basis to this research and the ensuing result analysis. Thus were analyzed companies from two diverse sectors of the Economy with the endeavor to prove “how” and “why” such innovation before the merger process happened and which the possible results from this analysis are. By using secondary sources, with the goal to present real and instant results of the innovation announcements of the studied enterprises, through cases and event studies, it is concluded that innovation in products and in partnerships create higher value than other sorts of innovation in short term and in the post-merger.

  17. Innovation and energy. ECRIN day

    International Nuclear Information System (INIS)

    2004-01-01

    ECRIN is an association jointly created by the French atomic energy commission (CEA) and the French national center of scientific research (CNRS). It gathers experts from the research and industry worlds, representatives of institutions and decision making peoples in order to work on important topics like energy. This document gathers the working documents and transparencies presented at the ECRIN day on energy and innovation: opening talk of C. Birraux (head of the parliamentary office of evaluation of scientific and technological choices); the energy of seas (offshore wind power, wave energy, tide currents energy, thermal energy of seas, osmotic energy, tidal energy); synthetic fuels (stakes, possible options, Fischer-Tropsch synthesis, GTL, CTL, BTL, production with CO 2 recycling); capture and geological sequestration of CO 2 : a general overview (stakes, solutions, capture and sequestration, transport, geologic disposal, present day situation and perspectives); geothermal energy: new prospects (enhanced geothermal systems, hot-dry-rocks and hot fractured rocks, advances, cost, advantages and drawbacks); heat pumps and valorization of low temperature heat sources (space heating, district heating networks, heat pumps, artificial geothermal energy, low temperature water transport, thermal potentiality); heat and coldness storage and transport (use of intermittent energy sources, cogeneration, optimisation of processes, recovery of heat losses, CO 2 capture, present-day situation, problems to be solved, integration of systems and processes); plastic photovoltaic solar cells (market, stakes, potentialities of organic materials for photovoltaic conversion, state-of-the-art, research in Europe and France, perspectives); conclusion of the Ecrin day (challenges, diversification of energy sources, energy efficiency, abatement of CO 2 emissions, role of ECRIN). (J.S.)

  18. Innovation in Industrial Irradiation - How a Services Contractor Can Contribute to the Development of New Polymer Applications

    International Nuclear Information System (INIS)

    Minbiole, P.R.

    2006-01-01

    A contract electron beam processing company is primarily focused on providing production irradiation services to established customers; however, a forward-thinking services company encourages and enables the development of new polymer applications in a number of ways. Note that in this presentation innovation will typically refer to the development of new polymer applications for sizeable commercial opportunities, as opposed to innovation in scientific research. The traditional, and in many cases current, approach to innovation by service contractors in North America and Europe focuses on providing controlled irradiation for experimental activities by product developers. While some researchers around the world have ready access to electron beams, it may be surprising to point out that product developers in manufacturing companies including companies that operate their own beam for manufacturing existing products often have extremely limited access to that beam for development purposes. In addition, service contractors conduct a wide range of 'missionary' activities to let potential product developers know of the benefits of electron beam processing and to communicate their ability to facilitate the development of valuable products. Activities in this area include: participation in various industrial tradeshows, advertising, direct sales calls, seminars, press releases, website communication, and technical presentations to specific prospects and customers. The presenter's experience consists of more than 20 years as a 'hands-on' president of the largest contract electron beam processing company in North America, a company which provides processing for an exceptionally broad range of industrial applications. Some of these applications are well-known, successful applications involving crosslinking for such products as wire and cable jackets, heat-shrink tubing, PEX tubing, balloon angioplasty tubing, foam, films, hydrogels, etc. These products involve the crosslinking

  19. Fostering of Innovative Talents Based on Disciplinary Construction: HRD Strategy of Chinese Nuclear Power Industry

    International Nuclear Information System (INIS)

    Ye Yuanwei

    2014-01-01

    Workforce challenge to nuclear power industry: • We are facing the aging workforce and talent loss since the tough time of nuclear power industry. • Professional workforce fostering in nuclear power industry always needs a long period of time. • Professional workforce fostering in nuclear power industry is a systematic and interdisciplinary work. Talents fostering in nuclear power industry: Major measures → national overall planning; engineering practice; knowledge management; disciplinary construction; cooperation and communication

  20. A Cross-Strait Comparison of Innovation Policy under Industry 4.0 and Sustainability Development Transition

    Directory of Open Access Journals (Sweden)

    Kuan Chung Lin

    2017-05-01

    Full Text Available While the advent of Industry 4.0 is emblematic of national strategy for industrial revitalization, the proliferation of technology has drastically changed the landscape of many major sectors of global industries. Industry 4.0 encompasses multi-dimensional concepts—including computerization, digitization, and intelligentization—of business operations based on cyber-physical-systems (CPS and the Internet-of-Things (IoTs. The vision of Industry 4.0 will bring about improvements in industrial processes, ranging from engineering, material usage, supply chains, and product lifecycle management, to the horizontal value chain. This research project adopts a descriptive analysis with descriptive statistics under the innovation policy framework proposed by Rothwell and Zegveld. This report also informs a comparative policy analysis across China and Taiwan. From the perspectives of industry coalition and competition, this cross-strait comparison lends itself to being a policy-making reference. Results reveal that China, in terms of policy-making, concentrates on ‘political’ and ‘legal/regulatory’ aspects of environmental policy, as well as the theme of ‘public service’ of the demand-side policy. Taiwan also emphasizes the ‘environmental-side’ policy like China, whereas Taiwan focuses more on ‘education/training’ of the supply-side policy.