Patient compliance with extended low molecular weight heparin injections following hip and knee arthroplasty.

Science.gov (United States)

Deakin, Dan E; Mishreki, Andrew; Aslam, Nadim; Docker, Charles

2010-01-01

The use of extended duration thromboprophylaxis following hip and knee arthroplasty is becoming widespread. The aim of our study was to determine patient compliance with extended duration thromboprophylaxis using low molecular weight (LMWH) injections following hip and knee arthroplasty. 42 consecutive patients undergoing hip and knee arthroplasty were prospectively contacted during their fifth post operative week. A fully anonymised questionnaire was completed by each patient. All patients responded. One was excluded having been prescribed warfarin for pre existing atrial fibrillation. Twenty nine (71%) patients were discharged with the intention of self administering LMWH injections. Eight (20%) and four (9%) patients were discharged with the intention of administration by a relative or district nurse respectively. No patient required the person administering the injections to be changed after discharge from hospital. 90% (n=37) of patients reported not missing any doses. 10% (n=2) of patients missed one dose and 10% (n=2) missed two doses. Patient compliance with extended duration thromboprophylaxis using LMWH injections is extremely high. Oral thromboprophylaxis may be useful in the minority of patients requiring daily visits by a nurse to administer injections.

Gender differences in sexual and injection risk behavior among active young injection drug users in San Francisco (the UFO Study).

Science.gov (United States)

Evans, Jennifer L; Hahn, Judith A; Page-Shafer, Kimberly; Lum, Paula J; Stein, Ellen S; Davidson, Peter J; Moss, Andrew R

2003-03-01

Female injection drug users (IDUs) represent a large proportion of persons infected with HIV in the United States, and women who inject drugs have a high incidence of hepatitis B virus (HBV) and hepatitis C virus (HCV) infection. Therefore, it is important to understand the role of gender in injection risk behavior and the transmission of blood-borne virus. In 2000-2002, 844 young (<30 years old) IDUs were surveyed in San Francisco. We compared self-reported risk behavior between 584 males and 260 female participants from cross-sectional baseline data. We used logistic regression to determine whether demographic, structural, and relationship variables explained increased needle borrowing, drug preparation equipment sharing, and being injected by another IDU among females compared to males. Females were significantly younger than males and were more likely to engage in needle borrowing, ancillary equipment sharing, and being injected by someone else. Females were more likely than males to report recent sexual intercourse and to have IDU sex partners. Females and males were not different with respect to education, race/ethnicity, or housing status. In logistic regression models for borrowing a used needle and sharing drug preparation equipment, increased risk in females was explained by having an injection partner who was also a sexual partner. Injecting risk was greater in the young female compared to male IDUs despite equivalent frequency of injecting. Overlapping sexual and injection partnerships were a key factor in explaining increased injection risk in females. Females were more likely to be injected by another IDU even after adjusting for years injecting, being in a relationship with another IDU, and other potential confounders. Interventions to reduce sexual and injection practices that put women at risk of contracting hepatitis and HIV are needed.

Individual Information-Centered Approach for Handling Physical Activity Missing Data

Science.gov (United States)

Kang, Minsoo; Rowe, David A.; Barreira, Tiago V.; Robinson, Terrance S.; Mahar, Matthew T.

2009-01-01

The purpose of this study was to validate individual information (II)-centered methods for handling missing data, using data samples of 118 middle-aged adults and 91 older adults equipped with Yamax SW-200 pedometers and Actigraph accelerometers for 7 days. We used a semisimulation approach to create six data sets: three physical activity outcome…

Injection and Dump Systems

CERN Document Server

Bracco, C; Barnes, M J; Carlier, E; Drosdal, L N; Goddard, B; Kain, V; Meddahi, M; Mertens, V; Uythoven, J

2012-01-01

Performance and failures of the LHC injection and ex- traction systems are presented. In particular, a comparison with the 2010 run, lessons learnt during operation with high intensity beams and foreseen upgrades are described. UFOs, vacuum and impedance problems related to the injection and extraction equipment are analysed together with possible improvements and solutions. New implemented features, diagnostics, critical issues of XPOC and IQC applications are addressed.

Mining face equipment

Energy Technology Data Exchange (ETDEWEB)

G, Litvinskiy G; Babyuk, G V; Yakovenko, V A

1981-01-07

Mining face equipment includes drilling advance wells, drilling using explosives on the contour bore holes, loading and transporting the crushed mass, drilling reinforcement shafts, injecting reinforcement compounds and moving the timber. Camouflet explosives are used to form relaxed rock stress beyond the mining area to decrease costs of reinforcing the mining area by using nonstressed rock in the advance well as support. The strengthening solution is injected through advanced cementing wells before drilling the contour bores as well as through radial cementing wells beyond the timbers following loading and transport of the mining debris. The advance well is 50-80 m.

Corrosion Study of the Injection Equipments in Water in Al-Ahdeb Wells ‐Iraq

Directory of Open Access Journals (Sweden)

Hassan Abdulkadhim Alwan Alsaadi

2015-01-01

Full Text Available Water injection equipments such as pipelines, which are used in the second recovery of oil in the Al-Ahdeb wells, suffer from the corrosion in water during maintaining vacuum deoxygenated tower that used to decrease concentration of the dissolved oxygen gas in the water from 6.2-9.1 ppm to o.5 ppm. This study involved calculation the corrosion rates of the internal surfaces of the pipelines either during operation of the vacuum unit or when the tower out of operation. Finally, find the solution by one of the following suggestions. In the first suggestion removal of the dissolved O2 from water is achieved by increasing the dosage of the oxygen scavenger (sodium sulphite. The second suggestion involves removing the dissolved O2 from water by bubbling the oxygenated water with nitrogen gas. The study showed that the corrosion rates of various inside diameter pipelines are between 0.13 mm/yr and 1.5 mm/yr during operation of the vacuum tower and between 3.2 mm/yr and 18.5 mm/yr when the tower out of the operation. While the results showed that the corrosion rate of the pipelines when the tower out of operation reached to the acceptable value of 0.1 mm/y when the dissolved oxygen in the injected water removed by increasing the dosage of the sodium sulphite (Na2SO3 to 48-72 ppm. The results also explained that corrosion rates of the pipelines reached to 0.5 mm/y when the dissolved oxygen removed by bubbling the water with nitrogen gas.

Injection safety practices in a main referral hospital in northeastern ...

African Journals Online (AJOL)

2013-03-25

Mar 25, 2013 ... containers specific for non-sharps infectious waste and 17 (77.3%) of the observed therapeutic injections ..... injection safety, a high percentage was not complying .... the availability of loose disposable injection equipment.

Missed opportunities for HPV immunization among young adult women

Science.gov (United States)

Oliveira, Carlos R.; Rock, Robert M.; Shapiro, Eugene D.; Xu, Xiao; Lundsberg, Lisbet; Zhang, Liye B.; Gariepy, Aileen; Illuzzi, Jessica L.; Sheth, Sangini S.

2018-01-01

BACKGROUND Despite the availability of a safe and efficacious vaccine against human papillomavirus, uptake of the vaccine in the United States is low. Missed clinical opportunities to recommend and to administer human papillomavirus vaccine are considered one of the most important reasons for its low uptake in adolescents; however, little is known about the frequency or characteristics of missed opportunities in the young adult (18–26 years of age) population. OBJECTIVE The objective of the study was to assess both the rates of and the factors associated with missed opportunities for human papillomavirus immunization among young adult women who attended an urban obstetrics and gynecology clinic. STUDY DESIGN In this cross-sectional study, medical records were reviewed for all women 18–26 years of age who were underimmunized (<3 doses) and who sought care from Feb. 1, 2013, to January 31, 2014, at an urban, hospital-based obstetrics and gynecology clinic. A missed opportunity for human papillomavirus immunization was defined as a clinic visit at which the patient was eligible to receive the vaccine and a dose was due but not administered. Multivariable logistic regression was used to test associations between sociodemographic variables and missed opportunities. RESULTS There were 1670 vaccine-eligible visits by 1241 underimmunized women, with a mean of 1.3 missed opportunities/person. During the study period, 833 of the vaccine eligible women (67.1%) had at least 1 missed opportunity. Overall, the most common types of visits during which a missed opportunity occurred were postpartum visits (17%) or visits for either sexually transmitted disease screening (21%) or contraception (33%). Of the patients with a missed opportunity, 26.5% had a visit at which an injectable medication or a different vaccine was administered. Women who identified their race as black had higher adjusted odds of having a missed opportunity compared with white women (adjusted odds ratio, 1

Effects of pilot injection parameters on low temperature combustion diesel engines equipped with solenoid injectors featuring conventional and rate-shaped main injection

International Nuclear Information System (INIS)

D’Ambrosio, S.; Ferrari, A.

2016-01-01

Highlights: • The influence of the principal pilot injection parameters is discussed for low-temperature combustion systems. • Swirl-sweep and dwell-time sweep results are combined to analyze soot emissions. • The pilot injection effects are investigated in injection profiles featuring rate-shaped main injections. - Abstract: The potential of pilot injection has been assessed on a low-temperature combustion diesel engine for automotive applications, which was characterized by a reduced compression-ratio, high EGR rates and postponed main injection timings. Dwell time sweeps have been carried out for pilot injections with distinct energizing times under different representative steady-state working conditions of the medium load and speed area of the New European Driving Cycle. The results of in-cylinder analyses of the pressure, heat-release rate, temperature and emissions are presented. Combustion noise has been shown to decrease significantly when the pilot injected mass increases, while it is scarcely affected by the dwell time between the pilot and main injections. The HC, CO and fuel consumption trends, with respect to both the pilot injection dwell time and mass, are in line with those of conventional combustion systems, and in particular decreasing trends occur as the pilot injection energizing time is increased. Furthermore, a reduced sensitivity of NO_x emissions to both dwell time and pilot injected mass has been found, compared to conventional combustion systems. Finally, it has been observed that soot emissions diminish as the energizing time is shortened, and their dependence on dwell time is influenced to a great extent by the presence of local zones with reduced air-to-fuel ratios within the cylinder. A combined analysis of the results of swirl sweeps and dwell time sweeps is here proposed as a methodology for the detection of any possible interference between pilot combustion burned gases and the main injected fuel. The effect of pilot

Risk Factors Associated with Unsafe Injection Practices at the First Injection Episode among Intravenous Drug Users in France: Results from PrimInject, an Internet Survey.

Science.gov (United States)

Guichard, Anne; Guignard, Romain; Lert, France; Roy, Elise

2015-01-01

Background. New drug use patterns may increase the risk of human immunodeficiency virus and hepatitis infections. In France, new injection patterns among youths with diverse social backgrounds have emerged, which may explain the persistently high rates of hepatitis C virus infection. This study explores factors associated with injection risk behaviours at first injection among users who began injecting in the post-2000 era. Methods. A cross-sectional study was conducted on the Internet from October 2010 to March 2011, through an online questionnaire. Multivariate logistic regression identified the independent correlates of needle sharing and equipment (cooker/cotton filter) sharing. Results. Among the 262 respondents (mean age 25 years), 65% were male. Both risk behaviours were positively associated with initiation before 18 years of age (aOR 3.7 CI 95% 1.3-10.6 and aOR 3.0 CI 95% 1.3-7.0) and being injected by another person (aOR 3.1 CI 95% 1.0-9.9 and aOR 3.0 CI 95% 1.3-7.1). Initiation at a party was an independent correlate of equipment sharing (aOR 2.6 95% CI 1.0-6.8). Results suggest a need for innovative harm reduction programmes targeting a variety of settings and populations, including youths and diverse party scenes. Education of current injectors to protect both themselves and those they might initiate into injection is critically important.

Risk Factors Associated with Unsafe Injection Practices at the First Injection Episode among Intravenous Drug Users in France: Results from PrimInject, an Internet Survey

Directory of Open Access Journals (Sweden)

Anne Guichard

2015-01-01

Full Text Available Background. New drug use patterns may increase the risk of human immunodeficiency virus and hepatitis infections. In France, new injection patterns among youths with diverse social backgrounds have emerged, which may explain the persistently high rates of hepatitis C virus infection. This study explores factors associated with injection risk behaviours at first injection among users who began injecting in the post-2000 era. Methods. A cross-sectional study was conducted on the Internet from October 2010 to March 2011, through an online questionnaire. Multivariate logistic regression identified the independent correlates of needle sharing and equipment (cooker/cotton filter sharing. Results. Among the 262 respondents (mean age 25 years, 65% were male. Both risk behaviours were positively associated with initiation before 18 years of age (aOR 3.7 CI 95% 1.3–10.6 and aOR 3.0 CI 95% 1.3–7.0 and being injected by another person (aOR 3.1 CI 95% 1.0–9.9 and aOR 3.0 CI 95% 1.3–7.1. Initiation at a party was an independent correlate of equipment sharing (aOR 2.6 95% CI 1.0–6.8. Conclusions. Results suggest a need for innovative harm reduction programmes targeting a variety of settings and populations, including youths and diverse party scenes. Education of current injectors to protect both themselves and those they might initiate into injection is critically important.

Alternative water injection device to reactor equipment facility

International Nuclear Information System (INIS)

Yamashita, Masahiro.

1995-01-01

The device of the present invention injects water to the reactor and the reactor container continuously for a long period of time for preventing occurrence of a severe accident in a BWR type reactor and maintaining the integrity of the reactor container even if the accident should occur. Namely, diesel-driven pumps disposed near heat exchangers of a reactor after-heat removing system (RHR) are operated before the reactor is damaged by the after heat to cause reactor melting. A sucking valve disposed to a pump sucking pipeline connecting a secondary pipeline of the RHR heat exchanger and the diesel driving pump is opened. A discharge valve disposed to a pump discharge pipeline connecting a primary pipeline of the RHR heat exchanger and the diesel driving pump is opened. With such procedures, sea water is introduced from a sea water taking port through the top end of the secondary pipeline of the RHR heat exchanger and water is injected into the inside of the pressure vessel or the reactor container by way of the primary pipeline of the RHR heat exchanger. As a result, the reactor core is prevented from melting even upon occurrence of a severe accident. (I.S.)

Wrist arthrography: The value of the three compartment injection technique

Energy Technology Data Exchange (ETDEWEB)

Levinsohn, E.M.; Coren, A.B.; Palmer, A.K.; Zinberg, E.

1987-10-01

Arthrography of the wrist was performed on 50 consecutive patients with obscure post-traumatic wrist pain by injecting contrast separately into the radiocarpal joint, midcarpal compartment, and distal radioulnar joint. When distal radioulnar joint and midcarpal compartment injections were added to the standard radiocarpal injection, many significant unsuspected abnormalities were identified. Of the 25 triangular fibrocartilage complex abnormalities identified, six (24%) were found only with the distal radioulnar joint injection. Of the 29 abnormal communications between the midcarpal compartment and the radiocarpal joint, ten (35%) were found only with the midcarpal injection. Similarly, five of 29 (17%) of the abnormal radiocarpal-midcarpal communications would have been missed if a midcarpal injection alone had been performed. These findings indicate that separate injections into the radiocarpal joint, midcarpal compartment, and distal radioulnar joint are needed to identify a large number of abnormalities not seen with injections into one compartment alone.

Missing money and missing markets: Reliability, capacity auctions and interconnectors

International Nuclear Information System (INIS)

Newbery, David

2016-01-01

In the energy trilemma of reliability, sustainability and affordability, politicians treat reliability as over-riding. The EU assumes the energy-only Target Electricity Model will deliver reliability but the UK argues that a capacity remuneration mechanism is needed. This paper argues that capacity auctions tend to over-procure capacity, exacerbating the missing money problem they were designed to address. The bias is further exacerbated by failing to address some of the missing market problems also neglected in the debate. It examines the case for, criticisms of, and outcome of the first GB capacity auction and problems of trading between different capacity markets. - Highlights: •Energy-only markets can work if they avoid missing money and missing market problems. •Policy makers over-estimate the cost of so-called “loss of load events”. •Policy makers tend to over-procure capacity, exacerbating the missing money problem. •Rectifying missing market problems simplifies trade between different capacity markets. •Addressing missing market problems makes under-procurement cheaper than over-procurement.

Principled Missing Data Treatments.

Science.gov (United States)

Lang, Kyle M; Little, Todd D

2018-04-01

We review a number of issues regarding missing data treatments for intervention and prevention researchers. Many of the common missing data practices in prevention research are still, unfortunately, ill-advised (e.g., use of listwise and pairwise deletion, insufficient use of auxiliary variables). Our goal is to promote better practice in the handling of missing data. We review the current state of missing data methodology and recent missing data reporting in prevention research. We describe antiquated, ad hoc missing data treatments and discuss their limitations. We discuss two modern, principled missing data treatments: multiple imputation and full information maximum likelihood, and we offer practical tips on how to best employ these methods in prevention research. The principled missing data treatments that we discuss are couched in terms of how they improve causal and statistical inference in the prevention sciences. Our recommendations are firmly grounded in missing data theory and well-validated statistical principles for handling the missing data issues that are ubiquitous in biosocial and prevention research. We augment our broad survey of missing data analysis with references to more exhaustive resources.

A randomized intervention trial to reduce the lending of used injection equipment among injection drug users infected with hepatitis C.

Science.gov (United States)

Latka, Mary H; Hagan, Holly; Kapadia, Farzana; Golub, Elizabeth T; Bonner, Sebastian; Campbell, Jennifer V; Coady, Micaela H; Garfein, Richard S; Pu, Minya; Thomas, Dave L; Thiel, Thelma K; Strathdee, Steffanie A

2008-05-01

We evaluated the efficacy of a peer-mentoring behavioral intervention designed to reduce risky distributive injection practices (e.g., syringe lending, unsafe drug preparation) among injection drug users with hepatitis C virus (HCV) infection. A randomized trial with a time-equivalent attention-control group was conducted among 418 HCV-positive injection drug users aged 18 to 35 years in 3 US cities. Participants reported their injection-related behaviors at baseline and at 3- and 6-month follow-ups. Compared with the control group, intervention-group participants were less likely to report distributive risk behaviors at 3 months (odds ratio [OR]=0.46; 95% confidence interval [CI]=0.27, 0.79) and 6 months (OR=0.51; 95% CI=0.31, 0.83), a 26% relative risk reduction, but were no more likely to cite their HCV-positive status as a reason for refraining from syringe lending. Effects were strongest among intervention-group participants who had known their HCV-positive status for at least 6 months. Peer mentoring and self-efficacy were significantly increased among intervention-group participants, and intervention effects were mediated through improved self-efficacy. This behavioral intervention reduced unsafe injection practices that may propagate HCV among injection drug users.

Compressed air injection technique to standardize block injection pressures.

Science.gov (United States)

Tsui, Ban C H; Li, Lisa X Y; Pillay, Jennifer J

2006-11-01

Presently, no standardized technique exists to monitor injection pressures during peripheral nerve blocks. Our objective was to determine if a compressed air injection technique, using an in vitro model based on Boyle's law and typical regional anesthesia equipment, could consistently maintain injection pressures below a 1293 mmHg level associated with clinically significant nerve injury. Injection pressures for 20 and 30 mL syringes with various needle sizes (18G, 20G, 21G, 22G, and 24G) were measured in a closed system. A set volume of air was aspirated into a saline-filled syringe and then compressed and maintained at various percentages while pressure was measured. The needle was inserted into the injection port of a pressure sensor, which had attached extension tubing with an injection plug clamped "off". Using linear regression with all data points, the pressure value and 99% confidence interval (CI) at 50% air compression was estimated. The linearity of Boyle's law was demonstrated with a high correlation, r = 0.99, and a slope of 0.984 (99% CI: 0.967-1.001). The net pressure generated at 50% compression was estimated as 744.8 mmHg, with the 99% CI between 729.6 and 760.0 mmHg. The various syringe/needle combinations had similar results. By creating and maintaining syringe air compression at 50% or less, injection pressures will be substantially below the 1293 mmHg threshold considered to be an associated risk factor for clinically significant nerve injury. This technique may allow simple, real-time and objective monitoring during local anesthetic injections while inherently reducing injection speed.

Injecting risk behavior among traveling young injection drug users: travel partner and city characteristics.

Science.gov (United States)

Montgomery, Martha E; Fatch, Robin S; Evans, Jennifer L; Yu, Michelle; Davidson, Peter J; Page, Kimberly; Hahn, Judith A

2013-06-01

Young injection drug users (IDUs), a highly mobile population, engage in high levels of injecting risk behavior, yet little is understood about how such risk behavior may vary by the characteristics of the cities to which they travel, including the existence of a syringe exchange program (SEP), as well as travel partner characteristics. In 2004-2005, we conducted a 6-month prospective study to investigate the risk behavior of 89 young IDUs as they traveled, with detailed information gathered about 350 city visits. In multivariable analyses, travel to larger urban cities with a population of 500,000-1,000,000 was significantly associated with injecting drugs (adjusted odds ratio (AOR) = 3.71; 95 % confidence interval (CI), 1.56-8.82), ancillary equipment sharing (AES; AOR = 7.05; 95 % CI, 2.25-22.06) and receptive needle sharing (RNS; AOR = 5.73; 95 % CI, 1.11-27.95), as compared with visits to smaller cities with populations below 50,000. Region of the country, and the existence of a SEP within the city visited, were not independently associated with injecting drugs, AES, or RNS during city visits. Traveling with more than one injecting partner was associated with injecting drugs during city visits (AOR = 2.77; 95 % CI, 1.46-5.27), when compared with traveling alone. Additionally, both non-daily and daily/almost daily alcohol use during city visits were associated with AES (AOR = 3.37; 95 % CI, 1.42-7.68; AOR = 3.03; 95 % CI, 1.32-6.97, respectively) as compared with no alcohol consumption. Traveling young IDUs are more likely to inject when traveling with other IDUs and to engage in higher risk injection behavior when they are in large cities. Risk behavior occurring in city visits, including equipment sharing and alcohol consumption, suggests further need for focused interventions to reduce risk for viral infection among this population.

Layout considerations for the PSB H- injection system

CERN Document Server

Aiba, M; Carli, C; Chanel, M; Fowler, A; Goddard, B; Weterings, W

2009-01-01

The layout of the PSB H- injection system is described, including the arguments for the geometry and the required equipment performance parameters. The longitudinal positions of the main elements are specified, together with the injected and circulating beam axes. The assumptions used in determining the geometry are listed.

Detailed modeling of common rail fuel injection process

NARCIS (Netherlands)

Seykens, X.L.J.; Somers, L.M.T.; Baert, R.S.G.

2005-01-01

Modeling of fuel injection equipment is a tool that is used increasingly for explaining or predicting the effect of advanced diesel injection strategies on combustion and emissions. This paper reports on the modeling of the high-pressure part of a research type Heavy Duty Common Rail (CR) fuel

Draught requirement of trailing foot and shallow injection equipment for applying slurry to grassland

NARCIS (Netherlands)

Huijsmans, J.F.M.; Hendriks, J.L.G.; Vermeulen, G.D.

1998-01-01

Surface spreading of slurry leads to the inevitable emission of ammonia into the environment. Injection of slurry on grassland reduces these emissions. However, injection of slurry by deep working injector tines with goose foot chisels (wings) requires high draught forces. This type of injection has

Injection device-related risk management toward safe administration of medications: experience in a university teaching hospital in The People's Republic of China.

Science.gov (United States)

Zhu, Ling-Ling; Li, Wei; Song, Ping; Zhou, Quan

2014-01-01

The use of injection devices to administer intravenous or subcutaneous medications is common practice throughout a variety of health care settings. Studies suggest that one-half of all harmful medication errors originate during drug administration; of those errors, about two-thirds involve injectables. Therefore, injection device management is pivotal to safe administration of medications. In this article, the authors summarize the relevant experiences by retrospective analysis of injection device-related near misses and adverse events in the Second Affiliated Hospital of Zhejiang University, School of Medicine, Zhejiang University, People's Republic of China. Injection device-related near misses and adverse events comprised the following: 1) improper selection of needle diameter for subcutaneous injection, material of infusion sets, and pore size of in-line filter; 2) complications associated with vascular access; 3) incidents induced by absence of efficient electronic pump management and infusion tube management; and 4) liquid leakage of chemotherapeutic infusion around the syringe needle. Safe injection drug use was enhanced by multidisciplinary collaboration, especially among pharmacists and nurses; drafting of clinical pathways in selection of vascular access; application of approaches such as root cause analysis using a fishbone diagram; plan-do-check-act and quality control circle; and construction of a culture of spontaneous reporting of near misses and adverse events. Pharmacists must be professional in regards to medication management and use. The depth, breadth, and efficiency of cooperation between nurses and pharmacists are pivotal to injection safety.

Direct injection of high pressure gas : scaling properties of pulsed turbulent jets

NARCIS (Netherlands)

Baert, R.S.G.; Klaassen, A.; Doosje, E.

2010-01-01

Existing gasoline DI injection equipment has been modified to generate single hole pulsed gas jets. Injection experiments have been performed at combinations of 3 different pressure ratios (2 of which supercritical) respectively 3 different hole geometries (i.e. length to diameter ratios). Injection

Study of axial injection of polarized protons into the grenoble cyclotron; Contribution a l'etude de l'injection axiale pour protons polarises sur le cyclotron de Grenoble

Energy Technology Data Exchange (ETDEWEB)

Pabot, J [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

By injecting ions axially into a cyclotron, it is possible to accelerate particles (polarized particles, heavy ions, etc...) obtainable only with difficulty when an internal ion source is used. In this work, after justifying the choice of an axial injection device equipped with a 'pseudo-cylindrical' deflector for the Grenoble cyclotron, we study theoretically the principle of such a detector, the choice of its parameters, and the effect of this choice on the conditions of acceleration of the beam by the cyclotron. From the experimental point of view, this report describes two operations which made it possible to check that the chosen injection device operated satisfactorily, qualitatively initially (electron model), then quantitatively (proton model). In conclusion, we believe that the Grenoble cyclotron thus equipped will be able to provide a relatively dense beam of polarized protons. (author) [French] L'injection axiale d'ions dans un cyclotron permet d'accelerer des particules (particules polarisees, ions lourds... ) difficiles a obtenir avec une source interne d'ions. Dans ce travail, apres avoir justifie le choix d'un dispositif d'injection axiale equipe d'un deflecteur 'pseudo-cylindrique' pour le cyclotron de Grenoble, nous avons etudie, du point de vue theorique, le principe d'un tel deflecteur, le choix de ses parametres, et l'incidence de ce choix sur les conditions d'acceleration du faisceau par le cyclotron. Du point de vue experimental, ce rapport decrit deux manipulations qui ont permis de verifier le bon fonctionnement du dispositif d'injection retenu, qualitativement d'abord (modele a electrons), quantitativement ensuite (maquette a protons). En conclusion, nous estimons que le cyclotron de Grenoble ainsi equipe, peut fournir un faisceau relativement intense de protons polarises. (auteur)

Ceramic injection molding

International Nuclear Information System (INIS)

Agueda, Horacio; Russo, Diego

1988-01-01

Interest in making complex net-shape ceramic parts with good surface finishing and sharp tolerances without machining is a driving force for studying the injection molding technique. This method consists of softhening the ceramic material by means of adding some plastic and heating in order to inject the mixture under pressure into a relatively cold mold where solidification takes place. Essentially, it is the same process used in thermoplastic industry but, in the present case, the ceramic powder load ranges between 80 to 90 wt.%. This work shows results obtained from the fabrication of pieces of different ceramic materials (alumina, barium titanate ferrites, etc.) in a small scale, using equipments developed and constructed in the laboratory. (Author) [es

Damage limits of accelerator equipment

CERN Document Server

Rosell, Gemma

2014-01-01

Beam losses occur in particle accelerators for various reasons. The effect of lost particles on accelerator equipment becomes more severe with the increasing energies and intensities. The present study is focused on the damage potential of the proton beam as a function of particle energy and beam size. Injection and extraction energies of different accelerators at CERN were considered.

Long-term follow-up of high-pressure injection injuries to the hand

NARCIS (Netherlands)

Wieder, Anat; Lapid, Oren; Plakht, Ygal; Sagi, Amiram

2006-01-01

High-pressure injection injury is an injury caused by accidental injection of substances by industrial equipment. This injury may have devastating sequelae. The goal of this study was to assess the long-term outcome of high-pressure injection injury to the hand. In this historical prospective study,

Financial report on the investment and maintenance of the RA reactor and equipment, Annex 5

International Nuclear Information System (INIS)

2002-01-01

For the purpose of maintenance of the RA reactor building and equipment, Serbian Ministry of science, technology and development has approved financial support for the following: purchase and installing 12 new battery cells in the reactor building, for purchase of the missing fire protection equipment, and purchasing the material for protection of the roof of the ventilation center. All the planned tasks were fulfilled [sr

Process control and product evaluation in micro molding using a screwless/two-plunger injection unit

DEFF Research Database (Denmark)

Tosello, Guido; Hansen, Hans Nørgaard; Dormann, B.

2010-01-01

A newly developed μ-injection molding machine equipped with a screwless/two-plunger injection unit has been employed to mould miniaturized dog-bone shaped specimens on polyoxymethylene and its process capability and robustness have been analyzed. The influence of process parameters on μ-injection......A newly developed μ-injection molding machine equipped with a screwless/two-plunger injection unit has been employed to mould miniaturized dog-bone shaped specimens on polyoxymethylene and its process capability and robustness have been analyzed. The influence of process parameters on μ......-injection molding was investigated using the Design of Experiments technique. Injection pressure and piston stroke speed as well as part weight and dimensions were considered as quality factors over a wide range of process parameters. Experimental results obtained under different processing conditions were...

Practical aspects of steam injection processes: A handbook for independent operators

Energy Technology Data Exchange (ETDEWEB)

Sarathi, P.S.; Olsen, D.K.

1992-10-01

More than 80% of the total steam injection process operating costs are for the production of steam and the operation of surface and subsurface equipment. The proper design and operation of the surface equipment is of critical importance to the success of any steam injection operation. However, the published monographs on thermal recovery have attached very little importance to this aspect of thermal oil recovery; hence, a definite need exists for a comprehensive manual that places emphasis on steam injection field practices and problems. This handbook is an attempt to fulfill this need. This handbook explores the concept behind steam injection processes and discusses the information required to evaluate, design, and implement these processes in the field. The emphasis is on operational aspects and those factors that affect the technology and economics of oil recovery by steam. The first four chapters describe the screening criteria, engineering, and economics of steam injection operation as well as discussion of the steam injection fundamentals. The next four chapters begin by considering the treatment of the water used to generate steam and discuss in considerable detail the design, operation and problems of steam generations, distribution and steam quality determination. The subsurface aspects of steamflood operations are addressed in chapters 9 through 12. These include thermal well completion and cementing practices, insulated tubulars, and lifting equipment. The next two chapters are devoted to subsurface operational problems encountered with the use of steam. Briefly described in chapters 15 and 16 are the steam injection process surface production facilities, problems and practices. Chapter 17 discusses the importance of monitoring in a steam injection project. The environmental laws and issues of importance to steam injection operation are outlined in chapter 18.

Analysis of Dynamic Characteristics of Water Injection Pump

Energy Technology Data Exchange (ETDEWEB)

Lee, Jong Myeong; Lee, Jeong Hoon; Ha, Jeong Min; Ahn, Byung Hyun; Kim, Won Cheol; Choi, Byeong Keun [Gyeongsang Nat' l Univ., Jinju (Korea, Republic of)

2013-12-15

Water injection pump outputs oil with high pressure during this process, seawater is injected into the well to recover the well pressure and maintain high productivity. A water injection pump has high productivity, and herefore, it serves as a key piece of equipment in marine plants. In this light, water injection pumps are being studied widely in industry. In this study, the rotor dynamics is analyzed to determine the natural frequency according to the bearing stiffness and operation speed change. This study aims to establish the pump reliability through critical speed, stability, and unbalance response analysis.

Injection safety practices among nursing staff of mission hospitals in ...

African Journals Online (AJOL)

Vincent E. Omorogbe, Vivian O. Omuemu, Alphonsus R. Isara ... practice of injection safety by nurses in mission hospitals in Benin City, Nigeria. Materials and Methods: A descriptive cross-sectional study was carried out. .... alternatives, reuse of injection equipment, self ... health facilities in rendering healthcare services.

Lessons Learned from Missing Flooding Barriers Operating Experience

International Nuclear Information System (INIS)

Simic, Z.; Veira, M. P.

2016-01-01

Flooding hazard is highly significant for nuclear power plant safety because of its potential for common cause impact on safety related systems, and because operating experience reviews regularly identify flooding as a cause of concern. Source of the flooding could be external (location) or internal (plant design). The amount of flooding water could vary but even small amount might suffice to affect redundant trains of safety related systems for power supply and cooling. The protection from the flooding is related to the design-basis flood level (DBFL) and it consists of three elements: structural, organizational and accessibility. Determination of the DBFL is critical, as Fukushima Daiichi accident terribly proved. However, as the topic of flooding is very broad, the scope of this paper is focused only on the issues related to the missing flood barriers. Structural measures are physically preventing flooding water to reach or damage safety related system, and they could be permanent or temporary. For temporary measures it is important to have necessary material, equipment and organizational capacity for the timely implementation. Maintenance is important for permanent protection and periodical review is important for assuring readiness and feasibility of temporary flooding protection. Final flooding protection element is assured accessibility to safety related systems during the flooding. Appropriate flooding protection is based on the right implementation of design requirements, proper maintenance and periodic reviews. Operating experience is constantly proving how numerous water sources and systems interactions make flooding protection challenging. This paper is presenting recent related operating experience feedback involving equipment, procedures and analysis. Most frequent deficiencies are: inadequate, degraded or missing seals that would allow floodwaters into safety related spaces. Procedures are inadequate typically because they underestimate necessary

Frequent food insecurity among injection drug users: correlates and concerns

Directory of Open Access Journals (Sweden)

Strike Carol

2012-12-01

Full Text Available Abstract Background Food insecurity and nutrition are two topics that are under-researched among injection drug users (IDUs. Our study examined the extent and correlates of food insecurity among a sample of IDUs and explored whether there is an association between food insecurity and injection-related HIV risk. Methods A cross-sectional survey was conducted using interviewer-administered questionnaires. Data were collected at a needle exchange program in London, Ontario, Canada between September 2006 and January 2007. Participants included 144 English-speaking IDUs who had injected drugs in the past 30 days. Participants were asked about their socio-demographic characteristics, HIV risk behaviours, food insecurity, and health/social service use. Results In the past 6 months, 54.5% of participants reported that on a daily/weekly basis they did not have enough to eat because of a lack of money, while 22.1% reported this type of food insecurity on a monthly basis. Moreover, 60.4% and 24.3% reported that they did not eat the quality or quantity of food they wanted on a daily/weekly or a monthly basis, respectively. Participants reported re-using someone else’s injection equipment: 21% re-used a needle, 19% re-used water, and 37.3% re-used a cooker. The odds of sharing injection equipment were increased for food insecure individuals. Conclusions Findings show that IDUs have frequent and variable experiences of food insecurity and these experiences are strongly correlated with sharing of injection-related equipment. Such behaviours may increase the likelihood of HIV and HCV transmission in this population. Addressing food-related needs among IDUs is urgently needed.

UV-visible digital imaging of split injection in a Gasoline Direct Injection engine

Directory of Open Access Journals (Sweden)

Merola Simona Silvia

2015-01-01

Full Text Available Ever tighter limits on pollutant emissions and the need to improve energy conversion efficiency have made the application of gasoline direct injection (GDI feasible for a much wider scale of spark ignition engines. Changing the way fuel is delivered to the engine has thus provided increased flexibility but also challenges, such as higher particulate emissions. Therefore, alternative injection control strategies need to be investigated in order to obtain optimum performance and reduced environmental impact. In this study, experiments were carried out on a single-cylinder GDI optical engine fuelled with commercial gasoline in lean-burn conditions. The single-cylinder was equipped with the head of a commercial turbocharged engine with similar geometrical specifications (bore, stroke, compression ratio and wall guided fuel injection. Optical accessibility was ensured through a conventional elongated hollow Bowditch piston and an optical crown, accommodating a fused-silica window. Experimental tests were performed at fixed engine speed and injection pressure, whereas the injection timing and the number of injections were adjusted to investigate their influence on combustion and emissions. UV-visible digital imaging was applied in order to follow the combustion process, from ignition to the late combustion phase. All the optical data were correlated with thermodynamic analysis and measurements of exhaust emissions. Split injection strategies (i.e. two injections per cycle with respect to single injection increased combustion efficiency and stability thanks to an improvement of fuel air mixing. As a consequence, significant reduction in soot formation and exhaust emission with acceptable penalty in terms of HC and NOx were measured.

Injection device-related risk management toward safe administration of medications: experience in a university teaching hospital in The People's Republic of China

Directory of Open Access Journals (Sweden)

Zhu LL

2014-03-01

Full Text Available Ling-ling Zhu,1 Wei Li,2 Ping Song,3 Quan Zhou3 1Geriatric VIP Ward, Division of Nursing, 2Division of Medical Administration, 3Department of Pharmacy, the Second Affiliated Hospital, School of Medicine, Zhejiang University, Hangzhou, People's Republic of China Abstract: The use of injection devices to administer intravenous or subcutaneous medications is common practice throughout a variety of health care settings. Studies suggest that one-half of all harmful medication errors originate during drug administration; of those errors, about two-thirds involve injectables. Therefore, injection device management is pivotal to safe administration of medications. In this article, the authors summarize the relevant experiences by retrospective analysis of injection device-related near misses and adverse events in the Second Affiliated Hospital of Zhejiang University, School of Medicine, Zhejiang University, People's Republic of China. Injection device-related near misses and adverse events comprised the following: 1 improper selection of needle diameter for subcutaneous injection, material of infusion sets, and pore size of in-line filter; 2 complications associated with vascular access; 3 incidents induced by absence of efficient electronic pump management and infusion tube management; and 4 liquid leakage of chemotherapeutic infusion around the syringe needle. Safe injection drug use was enhanced by multidisciplinary collaboration, especially among pharmacists and nurses; drafting of clinical pathways in selection of vascular access; application of approaches such as root cause analysis using a fishbone diagram; plan–do–check–act and quality control circle; and construction of a culture of spontaneous reporting of near misses and adverse events. Pharmacists must be professional in regards to medication management and use. The depth, breadth, and efficiency of cooperation between nurses and pharmacists are pivotal to injection safety. Keywords

INJECTION CARBON STRIPPING FOIL ISSUES IN THE SNS ACCUMULATOR RING

International Nuclear Information System (INIS)

BEEBE-WANG, J.; LEE, Y.Y.; RAPARIA, D.; WEI, J.

2001-01-01

We are reporting the results of studies on issues related to the injection stripping foil in the Spallation Neutron Source (SNS) accumulator ring. The problems related to foil heating and foil lifetime, such as current density distribution and temperature distribution in the foil, are investigated. The impact of injection errors on the beam losses at the foil is studied. The particle traversal rate and the beam losses due to scattering in the foil are summarized. Finally, SNS end-to-end simulation results of the foil-missing rate, the foil-hitting rate and the maximum foil temperature are presented

Research on Continuous Injection Direct Rolling Process for PMMA Optical Plate

Directory of Open Access Journals (Sweden)

HaiXiong Wang

2014-06-01

Full Text Available Continuous injection direct rolling (CIDR combined intermittent injection and rolling process is a new technology for molding optical polymer plates with microstructured patterns; research on forming PMMA optical plates is an aspect of it in this paper. The equipment of CIDR process consists of plastic injection module, precision rolling module, and automatic coiling module. Based on the establishing mathematical CIDR models, numerical analysis was used to explode the distribution of velocity, temperature, and pressure in injection-rolling zone. The simulation results show that it is feasible to control the temperature, velocity, and injection-rolling force, so it can form polymer plate under certain process condition. CIDR experiment equipment has been designed and produced. PMMA optical plate was obtained by CIDR experiments, longitudinal thickness difference is 0.005 mm/200 mm, horizontal thickness difference is 0.02/200 mm, transmittance is 86.3%, Haze is 0.61%, and the difference is little compared with optical glasses. So it can be confirmed that CIDR process is practical to produce PMMA optical plates.

Safe Injection Practices in Primary Health Care Settings of Naxalbari Block, Darjeeling District, West Bengal.

Science.gov (United States)

Chaudhuri, Sudip Banik; Ray, Kuntala

2016-01-01

Unsafe injection can transmit many diseases to patients, injection providers and healthy people of community. To find out critical steps whether executed according to recommended best practice methods, availability of equipments in health facilities for safe injection practices and some important steps of waste disposal methods. This facility-based cross-sectional observational study was conducted among 30 Auxiliary nurse midwives (ANM) & 27 nursing staffs (NS) to assess certain aspects of their practice while administrating injection and disposal of the disposables. Health facilities were also observed to asses necessary equipments of safe injection and waste disposal methods. Among the health workers 93.3% ANM and 100% NS took sterile syringe from sterile unopened packet, all of the study subjects washed hand before giving injection, 13.3% of ANMs and 8% of NS are fully vaccinated against Hep B, 53.3% of ANM and all NS are practices non recapping. Only 13.33% sub centres along with PHC & BPHC had at least one puncture resistant leak proof container, 86.7% sub centres, PHC are free from loose needles. Transport for off side treatment is the method of waste disposal in case of 73.3% cases sub centres, PHC & BPHC. There is need to educate, train and motivate service providers in proper methods of giving injection along with improve the adequacy of supply of required equipments.

HIV and Injection Drug Use PSA (:60)

Centers for Disease Control (CDC) Podcasts

This 60 second public service announcement is based on the December 2016 CDC Vital Signs report. Sharing needles, syringes, and other injection equipment puts you at risk for getting HIV and other infections, including hepatitis. Learn how to reduce your HIV risk.

Collateral missing value imputation: a new robust missing value estimation algorithm for microarray data.

Science.gov (United States)

Sehgal, Muhammad Shoaib B; Gondal, Iqbal; Dooley, Laurence S

2005-05-15

Microarray data are used in a range of application areas in biology, although often it contains considerable numbers of missing values. These missing values can significantly affect subsequent statistical analysis and machine learning algorithms so there is a strong motivation to estimate these values as accurately as possible before using these algorithms. While many imputation algorithms have been proposed, more robust techniques need to be developed so that further analysis of biological data can be accurately undertaken. In this paper, an innovative missing value imputation algorithm called collateral missing value estimation (CMVE) is presented which uses multiple covariance-based imputation matrices for the final prediction of missing values. The matrices are computed and optimized using least square regression and linear programming methods. The new CMVE algorithm has been compared with existing estimation techniques including Bayesian principal component analysis imputation (BPCA), least square impute (LSImpute) and K-nearest neighbour (KNN). All these methods were rigorously tested to estimate missing values in three separate non-time series (ovarian cancer based) and one time series (yeast sporulation) dataset. Each method was quantitatively analyzed using the normalized root mean square (NRMS) error measure, covering a wide range of randomly introduced missing value probabilities from 0.01 to 0.2. Experiments were also undertaken on the yeast dataset, which comprised 1.7% actual missing values, to test the hypothesis that CMVE performed better not only for randomly occurring but also for a real distribution of missing values. The results confirmed that CMVE consistently demonstrated superior and robust estimation capability of missing values compared with other methods for both series types of data, for the same order of computational complexity. A concise theoretical framework has also been formulated to validate the improved performance of the CMVE

New or ν missing energy

DEFF Research Database (Denmark)

Franzosi, Diogo Buarque; Frandsen, Mads T.; Shoemaker, Ian M.

2016-01-01

flavor structures. Monojet data alone can be used to infer the mass of the "missing particle" from the shape of the missing energy distribution. In particular, 13 TeV LHC data will have sensitivity to DM masses greater than $\\sim$ 1 TeV. In addition to the monojet channel, NSI can be probed in multi......Missing energy signals such as monojets are a possible signature of Dark Matter (DM) at colliders. However, neutrino interactions beyond the Standard Model may also produce missing energy signals. In order to conclude that new "missing particles" are observed the hypothesis of BSM neutrino......-lepton searches which we find to yield stronger limits at heavy mediator masses. The sensitivity offered by these multi-lepton channels provide a method to reject or confirm the DM hypothesis in missing energy searches....

Study of axial injection of polarized protons into the grenoble cyclotron

International Nuclear Information System (INIS)

Pabot, J.

1969-01-01

By injecting ions axially into a cyclotron, it is possible to accelerate particles (polarized particles, heavy ions, etc...) obtainable only with difficulty when an internal ion source is used. In this work, after justifying the choice of an axial injection device equipped with a 'pseudo-cylindrical' deflector for the Grenoble cyclotron, we study theoretically the principle of such a detector, the choice of its parameters, and the effect of this choice on the conditions of acceleration of the beam by the cyclotron. From the experimental point of view, this report describes two operations which made it possible to check that the chosen injection device operated satisfactorily, qualitatively initially (electron model), then quantitatively (proton model). In conclusion, we believe that the Grenoble cyclotron thus equipped will be able to provide a relatively dense beam of polarized protons. (author) [fr

Injecting drug use in prison: prevalence and implications for needle exchange policy.

Science.gov (United States)

Wright, Nat M J; Tompkins, Charlotte N E; Farragher, Tracey M

2015-01-01

The purpose of this paper is to explore prison drug injecting prevalence, identify any changes in injecting prevalence and practice during imprisonment and explore views on prison needle exchange. An empirical prospective cohort survey conducted between 2006 and 2008. The study involved a random sample of 267 remand and sentenced prisoners from a large male category B prison in England where no prison needle exchange operates. Questionnaires were administered with prisoners on reception and, where possible, at one, three and six months during their sentence. In total, 64 per cent were injecting until admission into prison. The majority intended to stop injecting in prison (93 per cent), almost a quarter due to the lack of needle exchange (23 per cent). Yet when hypothetically asked if they would continue injecting in prison if needle exchange was freely available, a third of participants (33 per cent) believed that they would. Injecting cessation happened on prison entry and appeared to be maintained during the sentence. Not providing sterile needles may increase risks associated with injecting for prisoners who continue to inject. However, providing such equipment may prolong injecting for other prisoners who currently cease injecting on account of needle exchange programmes (NEPs) not being provided in the UK prison setting. Practical implications - Not providing sterile needles may increase risks associated with injecting for prisoners who continue to inject. However, providing such equipment may prolong injecting for other prisoners who currently cease injecting on account of NEPs not being provided in the UK prison setting. This survey is the first to question specifically regarding the timing of injecting cessation amongst male prisoners and explore alongside intention to inject should needle exchange facilities be provided in prison.

Determination of Anthracycline Drug Residual in Cleaning Validation Swabs of Stainless-Steel Equipment after Production of Cytostatic Injections Using HPLC Analytical Method

Directory of Open Access Journals (Sweden)

Zuzana Slivová

2015-01-01

Full Text Available Standard cleaning procedures of production line equipment were verified after manufacture of cytostatic injections containing Anthracycline derivate substance. Residual content of Anthracycline drug substance on stainless-steel equipment surface was determined using swab sampling with a specific HPLC-DAD analysis. The acceptance limit was decided as 200.0 μg/100 cm2. Recovery from the stainless-steel surface was 90.1%. Linearity of the method was observed in the concentration range of 0.155–194 μg/mL when estimated using Zorbax TMS (5 μm, 0.25 m × 4.6 mm ID column at 1.3 mL/min flow rate and 254 nm (DAD 190–600 nm. The mobile phase consisted of lauryl hydrogen sulphate solution (3.7 g/L : methanol : acetonitrile (54 : 16 : 30, v/v/v with pH adjusted to 2.5 using phosphoric acid (85%. The LOD and LOQ for Anthracycline derivate were found to be 0.047 and 0.155 μg/mL, respectively. The method validation confirmed the method provides acceptable degree of selectivity, linearity, accuracy, and precision for the intended purposes.

Characteristics of pressure wave in common rail fuel injection system of high-speed direct injection diesel engines

Directory of Open Access Journals (Sweden)

Mohammad Reza Herfatmanesh

2016-05-01

Full Text Available The latest generation of high-pressure common rail equipment now provides diesel engines possibility to apply as many as eight separate injection pulses within the engine cycle for reducing emissions and for smoothing combustion. With these complicated injection arrangements, optimizations of operating parameters for various driving conditions are considerably difficult, particularly when integrating fuel injection parameters with other operating parameters such as exhaust gas recirculation rate and boost pressure together for evaluating calibration results. Understanding the detailed effects of fuel injection parameters upon combustion characteristics and emission formation is therefore particularly critical. In this article, the results and discussion of experimental investigations on a high-speed direct injection light-duty diesel engine test bed are presented for evaluating and analyzing the effects of main adjustable parameters of the fuel injection system on all regulated emission gases and torque performance. Main injection timing, rail pressure, pilot amount, and particularly pilot timing have been examined. The results show that optimization of each of those adjustable parameters is beneficial for emission reduction and torque improvement under different operating conditions. By exploring the variation in the interval between the pilot injection and the main injection, it is found that the pressure wave in the common rail has a significant influence on the subsequent injection. This suggests that special attentions must be paid for adjusting pilot timing or any injection interval when multi-injection is used. With analyzing the fuel amount oscillation of the subsequent injections to pilot separation, it demonstrates that the frequency of regular oscillations of the actual fuel amount or the injection pulse width with the variation in pilot separation is always the same for a specified fuel injection system, regardless of engine speed

Single-use autoinjector for once-weekly intramuscular injection of IFNβ-1a.

Science.gov (United States)

Limmroth, Volker; Gerbershagen, Kathrin

2014-12-01

IFNβ products and glatiramer acetate are established treatment first-line options in long-term disease-modifying therapy of multiple sclerosis (MS). These self-injectable medications are used once weekly to once daily. Injection-related issues are common patient-cited reasons for nonadherence. Autoinjectors have been shown to support long-term adherence to injectable medications. The ability to self-inject in MS patients has been associated with a reduced risk of missed injections and drug discontinuation, and a beneficial effect on patient independence. The recently introduced easy-to-use prefilled once-weekly pen is a safe and effective device for intramuscular (IM) IFNβ-1a application and provides a convenient method for self-injection. We reviewed the available published evidence on the characteristics of this device. The once-weekly pen facilitates self-injection and was preferred over prefilled syringes by patients in a prospective open-label, multicenter Phase IIIb trial in MS patients who had been using IM IFNβ-1a in prefilled syringes. The simple and safe handling, shielded short needle, single-use disposable design and virtually painless injection by the device may contribute to adherence, quality of life and independence in patients using IM IFNβ-1a.

Process Condition Monitoring of Micro Moulding Using a Two-plunger Micro Injection Moulding Machine

DEFF Research Database (Denmark)

Tosello, Guido; Hansen, Hans Nørgaard; Guerrier, Patrick

2010-01-01

The influence of micro injection moulding (µIM) process parameters (melt and mould temperature, piston injection speed and stoke length) on the injection pressure was investigated using Design of Experiments. Direct piston injection pressure measurements were performed and data collected using...... a micro injection moulding machine equipped with a two-pluger injection unit. Miniaturized dog-bone shaped speciments on polyoxymethylene (POM) were moulded over a wide range of processing cpnditions in order to characterize the process and assess its capability. Experimental results obtained under...

Semiparametric Theory and Missing Data

CERN Document Server

Tsiatis, Anastasios A

2006-01-01

Missing data arise in almost all scientific disciplines. In many cases, missing data in an analysis is treated in a casual and ad-hoc manner, leading to invalid inferences and erroneous conclusions. This book summarizes knowledge regarding the theory of estimation for semiparametric models with missing data.

Direct injection of a diesel-butane blend in a heavy duty engine

NARCIS (Netherlands)

Leermakers, C.A.J.; van den Berge, B.; Luijten, C.C.M.; Somers, L.M.T.; Jaasma, S.A.M.; Goey, de L.P.H.

2011-01-01

LPG (Liquefied Petroleum Gas) has for long been used in passenger cars. Presently, LPG sup-ply systems have also attracted considerable at-tention for heavy duty use. LPG can be applied in these engines combining port fuel injected LPG with a direct injection of diesel. These engines equipped with a

"Vivo para consumirla y la consumo para vivir" ["I live to inject and inject to live"]: high-risk injection behaviors in Tijuana, Mexico.

Science.gov (United States)

Strathdee, Steffanie A; Fraga, Wendy Davila; Case, Patricia; Firestone, Michelle; Brouwer, Kimberly C; Perez, Saida Gracia; Magis, Carlos; Fraga, Miguel Angel

2005-09-01

Injection drug use is a growing problem on the US-Mexico border, where Tijuana is situated. We studied the context of injection drug use among injection drug users (IDUs) in Tijuana to help guide future research and interventions. Guided in-depth interviews were conducted with 10 male and 10 female current IDUs in Tijuana. Topics included types of drug used, injection settings, access to sterile needles, and environmental influences. Interviews were taped, transcribed verbatim, and translated. Content analysis was conducted to identify themes. Of the 20 IDUs, median age and age at first injection were 30 and 18. Most reported injecting at least daily: heroin ("carga", "chiva", "negra"), methamphetamine ("crico", "cri-cri"), or both drugs combined. In sharp contrast to Western US cities, almost all regularly attended shooting galleries ("yongos" or "picaderos") because of the difficulties obtaining syringes and police oppression. Almost all shared needles/paraphernalia ["cuete" (syringe), "cacharros" (cookers), cotton from sweaters/socks (filters)]. Some reported obtaining syringes from the United States. Key themes included (1) pharmacies refusing to sell or charging higher prices to IDUs, (2) ample availability of used/rented syringes from "picaderos" (e.g., charging approximately 5 pesos or "10 drops" of drug), and (3) poor HIV/AIDS knowledge, such as beliefs that exposing syringes to air "kills germs." This qualitative study suggests that IDUs in Tijuana are at high risk of HIV and other blood-borne infections. Interventions are urgently needed to expand access to sterile injection equipment and offset the potential for a widespread HIV epidemic.

Computer control of the ISX-B neutral injection beamlines

International Nuclear Information System (INIS)

Hanna, P.C.

1982-09-01

A system of controls for the Impurity Study Experiment (ISX-B) neutral injection beamlines at the Oak Ridge National Laboratory is presented. The system uses standard CAMAC equipment interfaced to the actual beamline controls and driven by a PDP-11/34 mini-computer. It is designed to relieve the operator of most of the mundane tasks of beam injection and also to reduce the number of operators needed to monitor multiple beamlines

Near misses and unsafe conditions reported in a Pediatric Emergency Research Network

Science.gov (United States)

Ruddy, Richard M; Chamberlain, James M; Mahajan, Prashant V; Funai, Tomohiko; O'Connell, Karen J; Blumberg, Stephen; Lichenstein, Richard; Gramse, Heather L; Shaw, Kathy N

2015-01-01

Objective Patient safety may be enhanced by using reports from front-line staff of near misses and unsafe conditions to identify latent safety events. We describe paediatric emergency department (ED) near-miss events and unsafe conditions from hospital reporting systems in a 1-year observational study from hospitals participating in the Pediatric Emergency Care Applied Research Network (PECARN). Design This is a secondary analysis of 1 year of incident reports (IRs) from 18 EDs in 2007–2008. Using a prior taxonomy and established method, this analysis is of all reports classified as near-miss (events not reaching the patient) or unsafe condition. Classification included type, severity, contributing factors and personnel involved. In-depth review of 20% of IRs was performed. Results 487 reports (16.8% of eligible IRs) are included. Most common were medication-related, followed by laboratory-related, radiology-related and process-related IRs. Human factors issues were related to 87% and equipment issues to 11%. Human factor issues related to non-compliance with procedures accounted for 66.4%, including 5.95% with no or incorrect ID. Handoff issues were important in 11.5%. Conclusions Medication and process-related issues are important causes of near miss and unsafe conditions in the network. Human factors issues were highly reported and non-compliance with established procedures was very common, and calculation issues, communications (ie, handoffs) and clinical judgment were also important. This work should enable us to help improve systems within the environment of the ED to enhance patient safety in the future. PMID:26338681

Augmented Reality-Guided Lumbar Facet Joint Injections.

Science.gov (United States)

Agten, Christoph A; Dennler, Cyrill; Rosskopf, Andrea B; Jaberg, Laurenz; Pfirrmann, Christian W A; Farshad, Mazda

2018-05-08

The aim of this study was to assess feasibility and accuracy of augmented reality-guided lumbar facet joint injections. A spine phantom completely embedded in hardened opaque agar with 3 ring markers was built. A 3-dimensional model of the phantom was uploaded to an augmented reality headset (Microsoft HoloLens). Two radiologists independently performed 20 augmented reality-guided and 20 computed tomography (CT)-guided facet joint injections each: for each augmented reality-guided injection, the hologram was manually aligned with the phantom container using the ring markers. The radiologists targeted the virtual facet joint and tried to place the needle tip in the holographic joint space. Computed tomography was performed after each needle placement to document final needle tip position. Time needed from grabbing the needle to final needle placement was measured for each simulated injection. An independent radiologist rated images of all needle placements in a randomized order blinded to modality (augmented reality vs CT) and performer as perfect, acceptable, incorrect, or unsafe. Accuracy and time to place needles were compared between augmented reality-guided and CT-guided facet joint injections. In total, 39/40 (97.5%) of augmented reality-guided needle placements were either perfect or acceptable compared with 40/40 (100%) CT-guided needle placements (P = 0.5). One augmented reality-guided injection missed the facet joint space by 2 mm. No unsafe needle placements occurred. Time to final needle placement was substantially faster with augmented reality guidance (mean 14 ± 6 seconds vs 39 ± 15 seconds, P Augmented reality-guided facet joint injections are feasible and accurate without potentially harmful needle placement in an experimental setting.

Increasing energy efficiency of a gasoline direct injection engine through optimal synchronization of single or double injection strategies

International Nuclear Information System (INIS)

Costa, Michela; Sorge, Ugo; Allocca, Luigi

2012-01-01

Highlights: ► Advantages of split injection in a GDI engine are studied through numerical simulation. ► At high load and speed, rich conditions, split injection does not improve engine performance. ► At moderate load and speed, lean conditions, double injection improves charge stratification. ► Optimal double injection increases work, reduces HC and increases NO. - Abstract: The greatest fuel efficiency advantages of gasoline direct injection (GDI) engines are achieved under the so-called mixed mode boosting, where mixture characteristics are properly adapted to the specific working condition. In particular, in the medium range of load and speed, overall lean mixtures are suitable of being used in the so-called direct injection stratified charge operation. Present paper reports the results of numerical optimization analyses aimed at increasing the energetic efficiency of a GDI engine equipped with a high pressure multi-hole injector under both single and double injection events. In moderate-load moderate-speed lean conditions, the single or double injection synchronization in the working cycle is effected through a procedure that couples a 3D numerical model of the in-cylinder processes with an optimization tool. The choice of both the start of the injection events and the time of spark advance is realized to maximize the engine work. The optimal double injection solution is shown to increase the engine energy efficiency with respect to the case injection is realized in one shot, thus confirming that split injections improve the quality of the charge stratification under lean operation. The effect on the major pollutants is also discussed.

Flexible Imputation of Missing Data

CERN Document Server

van Buuren, Stef

2012-01-01

Missing data form a problem in every scientific discipline, yet the techniques required to handle them are complicated and often lacking. One of the great ideas in statistical science--multiple imputation--fills gaps in the data with plausible values, the uncertainty of which is coded in the data itself. It also solves other problems, many of which are missing data problems in disguise. Flexible Imputation of Missing Data is supported by many examples using real data taken from the author's vast experience of collaborative research, and presents a practical guide for handling missing data unde

Digital Twin concept for smart injection molding

Science.gov (United States)

Liau, Y.; Lee, H.; Ryu, K.

2018-03-01

Injection molding industry has evolved over decades and became the most common method to manufacture plastic parts. Monitoring and improvement in the injection molding industry are usually performed separately in each stage, i.e. mold design, mold making and injection molding process. However, in order to make a breakthrough and survive in the industrial revolution, all the stages in injection molding need to be linked and communicated with each other. Any changes in one stage will cause a certain effect in other stage because there is a correlation between each other. Hence, the simulation should not only based on the input of historical data, but it also needs to include the current condition of equipment and prediction of future events in other stages to make the responsive decision. This can be achieved by implementing the concept of Digital Twin that models the entire process as a virtual model and enables bidirectional control with the physical process. This paper presented types of data and technology required to build the Digital Twin for the injection molding industry. The concept includes Digital Twin of each stage and integration of these Digital Twin model as a thoroughgoing model of the injection molding industry.

LHC Injection Beam Quality During LHC Run I

CERN Document Server

AUTHOR|(CDS)2079186; Kain, Verena; Stapnes, Steinar

The LHC at CERN was designed to accelerate proton beams from 450 GeV to 7 TeV and collide them in four large experiments. The 450 GeV beam is extracted from the last pre-accelerator, the SPS, and injected into the LHC via two 3 km long transfer lines, TI 2 and TI 8. The injection process is critical in terms of preservation of beam quality and machine protection. During LHC Run I (2009-2013) the LHC was filled with twelve high intensity injections per ring, in batches of up to 144 bunches of 1.7*10^11 protons per bunch. The stored beam energy of such a batch is already an order of magnitude above the damage level of accelerator equipment. Strict quality and machine protection requirements at injection have a significant impact on operational efficiency. During the first years of LHC operation, the injection phase was identified as one of the limiting factors for fast LHC turnaround time. The LHC Injection Quality Check (IQC) software framework was developed as a part of this thesis to monitor the beam quality...

Miss Lora juveelikauplus = Miss Lora jewellery store

Index Scriptorium Estoniae

2009-01-01

Narvas Fama kaubanduskeskuses (Tallinna mnt. 19c) asuva juveelikaupluse Miss Lora sisekujundusest. Sisearhitektid Annes Arro ja Hanna Karits. Poe sisu - vitriinkapid, vaip, valgustid - on valmistatud eritellimusel. Sisearhitektide tähtsamate tööde loetelu

HIV prevalence and risk among people who inject drugs in five South African cities.

Science.gov (United States)

Scheibe, Andrew; Makapela, David; Brown, Ben; dos Santos, Monika; Hariga, Fabienne; Virk, Harsheth; Bekker, Linda-Gail; Lyan, Olga; Fee, Nancy; Molnar, Margarete; Bocai, Alina; Eligh, Jason; Lehtovuori, Riku

2016-04-01

Policy and programming for people who inject drugs (PWID) in South Africa is limited by the scarcity of epidemiological data. We conducted a cross-sectional survey among 450 PWID (362 males and 88 females) from five South African cities in 2013, using outreach and peer referral to recruit participants. We carried out rapid HIV tests on participants' saliva and assessed drug-using and sexual practices by means of a questionnaire. We found that 26% of females and 13% of males reported to always share injecting equipment, while 49% of all participants had used contaminated injecting equipment the last time they injected. Only 6% of participants usually used bleach to clean their injecting equipment. We found that half of participants reported using a condom the last time they had sex. A quarter of participants reported symptoms of a sexually transmitted infection (STI) in the previous 12 months and 22% had ever worked as a sex worker (51% of females). HIV prevalence among participants was 14% (18% among females and 13% among males). In multivariate analysis HIV was significantly associated with being 25 years and older (adjusted odds ratio (aOR) 2.1, 95% confidence interval (CI) 1.0-4.6, p=0.06), belonging to a racial group other than white (aOR 4.2, 95% CI 1.9-9.4, p<0.001), coming from Gauteng province (aOR 2.3, 95% CI 1.1-5.5, p=0.023), having ever worked as a sex worker (aOR 3.4, 95% CI 1.7-7.2, p=0.001) and the presence of STI symptoms in the last 12 months (aOR 2.4, 95% CI 1.1-4.4, p=0.019). This study highlights the need for increased access to sterile injecting equipment, education around safer injecting practices and access to sexual and reproductive health services for PWID in South Africa. Programmes for PWID should also address the specific needs of female PWID, PWID who sell sex and PWID from previously disadvantaged communities. Copyright © 2016 Elsevier B.V. All rights reserved.

Strategies for replacement of obsolete equipment - including reverse engineering

International Nuclear Information System (INIS)

Irish, C.S.

2000-01-01

The presentation shall detail the challenges facing nuclear power plants with the replacement of obsolete equipment and the strategies used to overcome those challenges. The presentation will outline the common equipment types which are either obsolete or are becoming obsolete, with a focus on safety related components. The four options of the obsolete equipment replacement philosophy will be presented with replacement examples from each of the options shown for discussion purposes. Detailed examples from each of the four obsolete equipment replacement options of: commercially available equivalent component; modification of a commercial available component; reverse engineering of the original component; and finally, design changes using a new component, shall be presented to evaluate the advantages and disadvantages of each option. The presentation will include the technical challenges, cost and schedule concerns for each of the four options. Emphasis will be placed on the technological challenges associated with replacing old and obsolete equipment. The following is a bullet list of the challenges which will be discussed: Missing, misleading or no information on the original component; Acquiring information from the original equipment manufacturer and the plant; Using a sample component for the replacement evaluation and or reverse engineering; and Reverse engineering old equipment with newly available discrete components. The presentation will include the equivalency documentation using the EPRI guidelines when replacing an original component with a different yet form, fit and functional equivalent component. The presentation will conclude with a discussion of the advantages and disadvantages of the replacement of the obsolete component with a form, fit and functional equivalent component vs. the replacement of the original component with a new component with today's technology. (author)

Permeability of fissured rock - an experimental study with special regard to the water injection test

International Nuclear Information System (INIS)

Schneider, H.J.

1987-01-01

The permeability to water of fissured rock is one of the most important design parameters for many underground projects, such as, e.g. the final deposition of radioactive waste. Because the conventional water injection test according to LUGEON for the calculation of permeability to water is associated with a high degree of uncertainty, new test equipment was developed. This equipment works on the principle of the water injection tracer test and multi-level measurements, enabling detailed measurement of the flow process at injection site and in the rock. The tests were carried out in Bunter sandstone and granite. The LUGEON test concept was varied in short-term and long-term tests at identical geological boundary conditions, and with test control at constant pressure on the one hand and at constant injection volume on the other. The test results show that non-steady-state flow occurs with short injection times, whereby the range is limited to the local rock at injection site. An increasing in injection time can lead to an increase in range by a number of factors as well as to steady-state flow conditions. The permeability of the rock types investigated is inhomgeneous and anistropic as a result of the fissured structure. (orig./HP) With 114 figs., 4 tabs [de

Knowledge, Attitude and Practice of Injection Safety among Benue ...

African Journals Online (AJOL)

adedamla

syringes without sterilization. ... Injection safety as a concept includes all actions that ... access safe, affordable equipment to promote the ... Hospital. MATERIALS AND METHODS ... latitude 7043'N and longitude 8034'E. The hospital ... respondents personal experience of the consequences of .... facilities in Nigeria in 2004.

Injection safety practices among resident doctors in a tertiary health ...

African Journals Online (AJOL)

2013-11-20

Nov 20, 2013 ... E‑mail: drbecky4flex@yahoo.com. Introduction. Injection is one of ... materials, inadequate facilities for sterilization as well as an average of 4.9 .... protective equipment (PPE), safety boxes at strategic locations in the hospital ...

Handling missing values in the MDS-UPDRS.

Science.gov (United States)

Goetz, Christopher G; Luo, Sheng; Wang, Lu; Tilley, Barbara C; LaPelle, Nancy R; Stebbins, Glenn T

2015-10-01

This study was undertaken to define the number of missing values permissible to render valid total scores for each Movement Disorder Society Unified Parkinson's Disease Rating Scale (MDS-UPDRS) part. To handle missing values, imputation strategies serve as guidelines to reject an incomplete rating or create a surrogate score. We tested a rigorous, scale-specific, data-based approach to handling missing values for the MDS-UPDRS. From two large MDS-UPDRS datasets, we sequentially deleted item scores, either consistently (same items) or randomly (different items) across all subjects. Lin's Concordance Correlation Coefficient (CCC) compared scores calculated without missing values with prorated scores based on sequentially increasing missing values. The maximal number of missing values retaining a CCC greater than 0.95 determined the threshold for rendering a valid prorated score. A second confirmatory sample was selected from the MDS-UPDRS international translation program. To provide valid part scores applicable across all Hoehn and Yahr (H&Y) stages when the same items are consistently missing, one missing item from Part I, one from Part II, three from Part III, but none from Part IV can be allowed. To provide valid part scores applicable across all H&Y stages when random item entries are missing, one missing item from Part I, two from Part II, seven from Part III, but none from Part IV can be allowed. All cutoff values were confirmed in the validation sample. These analyses are useful for constructing valid surrogate part scores for MDS-UPDRS when missing items fall within the identified threshold and give scientific justification for rejecting partially completed ratings that fall below the threshold. © 2015 International Parkinson and Movement Disorder Society.

Missed hormonal contraceptives: new recommendations.

Science.gov (United States)

Guilbert, Edith; Black, Amanda; Dunn, Sheila; Senikas, Vyta

2008-11-01

To provide evidence-based guidance for women and their health care providers on the management of missed or delayed hormonal contraceptive doses in order to prevent unintended pregnancy. Medline, PubMed, and the Cochrane Database were searched for articles published in English, from 1974 to 2007, about hormonal contraceptive methods that are available in Canada and that may be missed or delayed. Relevant publications and position papers from appropriate reproductive health and family planning organizations were also reviewed. The quality of evidence is rated using the criteria developed by the Canadian Task Force on Preventive Health Care. This committee opinion will help health care providers offer clear information to women who have not been adherent in using hormonal contraception with the purpose of preventing unintended pregnancy. The Society of Obstetricians and Gynaecologists of Canada. SUMMARY STATEMENTS: 1. Instructions for what women should do when they miss hormonal contraception have been complex and women do not understand them correctly. (I) 2. The highest risk of ovulation occurs when the hormone-free interval is prolonged for more than seven days, either by delaying the start of combined hormonal contraceptives or by missing active hormone doses during the first or third weeks of combined oral contraceptives. (II) Ovulation rarely occurs after seven consecutive days of combined oral contraceptive use. (II) RECOMMENDATIONS: 1. Health care providers should give clear, simple instructions, both written and oral, on missed hormonal contraceptive pills as part of contraceptive counselling. (III-A) 2. Health care providers should provide women with telephone/electronic resources for reference in the event of missed or delayed hormonal contraceptives. (III-A) 3. In order to avoid an increased risk of unintended pregnancy, the hormone-free interval should not exceed seven days in combined hormonal contraceptive users. (II-A) 4. Back-up contraception should

The prevention and handling of the missing data

OpenAIRE

Kang, Hyun

2013-01-01

Even in a well-designed and controlled study, missing data occurs in almost all research. Missing data can reduce the statistical power of a study and can produce biased estimates, leading to invalid conclusions. This manuscript reviews the problems and types of missing data, along with the techniques for handling missing data. The mechanisms by which missing data occurs are illustrated, and the methods for handling the missing data are discussed. The paper concludes with recommendations for ...

Water injection profiling by nuclear logging

International Nuclear Information System (INIS)

Arnold, D.M.

1980-01-01

This invention relates to nuclear logging techniques for determining the volume flow rates and flow directions of injected water moving behind a wellbore casing. The apparatus includes a sonde equipped with a neutron source and dual radiation detectors. Oxygen in the neutron irradiated water is transmitted to 16 N and the resultant primary and Compton scattered gamma rays are detected in two energy windows by both detectors. Count rate data is analysed in terms of the windows to obtain linear flow velocities for water flow within and behind the casing. Volume flow rates are determined for upward and downward flow, and horizontal volume flow into the surrounding formation is calculated. A complete injection profile may thus be obtained. (U.K.)

Comparative study of oxihydrogen injection in turbocharged compression ignition engines

Science.gov (United States)

Barna, L.; Lelea, D.

2018-01-01

This document proposes for analysis, comparative study of the turbocharged, compression-ignition engine, equipped with EGR valve, operation in case the injection in intake manifold thereof a maximum flow rate of 1l/min oxyhydrogen resulted of water electrolysis, at two different injection pressures, namely 100 Pa and 3000 Pa, from the point of view of flue gas opacity. We found a substantial reduction of flue gas opacity in both cases compared to conventional diesel operation, but in different proportions.

Integrative missing value estimation for microarray data.

Science.gov (United States)

Hu, Jianjun; Li, Haifeng; Waterman, Michael S; Zhou, Xianghong Jasmine

2006-10-12

Missing value estimation is an important preprocessing step in microarray analysis. Although several methods have been developed to solve this problem, their performance is unsatisfactory for datasets with high rates of missing data, high measurement noise, or limited numbers of samples. In fact, more than 80% of the time-series datasets in Stanford Microarray Database contain less than eight samples. We present the integrative Missing Value Estimation method (iMISS) by incorporating information from multiple reference microarray datasets to improve missing value estimation. For each gene with missing data, we derive a consistent neighbor-gene list by taking reference data sets into consideration. To determine whether the given reference data sets are sufficiently informative for integration, we use a submatrix imputation approach. Our experiments showed that iMISS can significantly and consistently improve the accuracy of the state-of-the-art Local Least Square (LLS) imputation algorithm by up to 15% improvement in our benchmark tests. We demonstrated that the order-statistics-based integrative imputation algorithms can achieve significant improvements over the state-of-the-art missing value estimation approaches such as LLS and is especially good for imputing microarray datasets with a limited number of samples, high rates of missing data, or very noisy measurements. With the rapid accumulation of microarray datasets, the performance of our approach can be further improved by incorporating larger and more appropriate reference datasets.

Strategies for replacement of obsolete equipment, including reverse engineering

International Nuclear Information System (INIS)

Irish, C.S.

2003-01-01

The presentation shall detail the challenges facing nuclear power plants with the replacement of obsolete equipment and the strategies used to overcome those challenges. The presentation will outline the common equipment types which are either obsolete or are becoming obsolete, with a focus on safety related components. The four options of the obsolete equipment replacement philosophy will be presented with replacement examples from each of the options shown for discussion purposes. Detailed examples from each of the four obsolete equipment replacement options of, (1) commercially available equivalent component, (2) modification of a commercial available component, (3) reverse engineering of the original component and finally (4) design changes using a new component, shall be presented to evaluate the advantages and disadvantages of each option. The presentation will include the technical challenges, cost and schedule concerns for each of the four options. Emphasis will be placed on the technological challenges associated with replacing old and obsolete equipment. The following is a bullet list of the challenges which will be discussed: 1) Missing, misleading or no information on the original component. 2) Acquiring information from the original equipment manufacturer and the plant. 3) Using a sample component for the replacement evaluation and or reverse engineering. 4) Reverse engineering old equipment with newly available discrete components. The presentation will include the equivalency documentation using the EPRI guidelines when replacing an original component with a different yet form, fit and functional equivalent component. The presentation will conclude with a discussion of the advantages and disadvantages of the replacement of the obsolete component with a form, fit and functional equivalent component vs. the replacement of the original component with a new component with today's technology. (author)

Predictors of injection drug use cessation and relapse in a prospective cohort of young injection drug users in San Francisco, CA (UFO Study).

Science.gov (United States)

Evans, Jennifer L; Hahn, Judith A; Lum, Paula J; Stein, Ellen S; Page, Kimberly

2009-05-01

Studies of injection drug use cessation have largely sampled adults in drug treatment settings. Little is known about injection cessation and relapse among young injection drug users (IDU) in the community. A total of 365 HCV-negative IDU under age 30 years were recruited by street outreach and interviewed quarterly for a prospective cohort between January 2000 and February 2008. Participants were followed for a total of 638 person-years and 1996 visits. We used survival analysis techniques to identify correlates of injection cessation (> or =3 months) and relapse to injection. 67% of subjects were male, median age was 22 years (interquartile range (IQR) 20-26) and median years injecting was 3.6 (IQR 1.3-6.5). 28.8% ceased injecting during the follow-up period. Among those that ceased injecting, nearly one-half resumed drug injection on subsequent visits, one-quarter maintained injecting cessation, and one-quarter were lost to follow-up. Participating in a drug treatment program in the last 3 months and injecting less than 30 times per month were associated with injection cessation. Injecting heroin or heroin mixed with other drugs, injecting the residue from previously used drug preparation equipment, drinking alcohol, and using benzodiazepines were negatively associated with cessation. Younger age was associated with relapse to injection. These results suggest that factors associated with stopping injecting involve multiple areas of intervention, including access to drug treatment and behavioral approaches to reduce injection and sustain cessation. The higher incidence of relapse in the younger subjects in this cohort underscores the need for earlier detection and treatment programs targeted to adolescents and transition-age youth.

Integrative missing value estimation for microarray data

Directory of Open Access Journals (Sweden)

Zhou Xianghong

2006-10-01

Full Text Available Abstract Background Missing value estimation is an important preprocessing step in microarray analysis. Although several methods have been developed to solve this problem, their performance is unsatisfactory for datasets with high rates of missing data, high measurement noise, or limited numbers of samples. In fact, more than 80% of the time-series datasets in Stanford Microarray Database contain less than eight samples. Results We present the integrative Missing Value Estimation method (iMISS by incorporating information from multiple reference microarray datasets to improve missing value estimation. For each gene with missing data, we derive a consistent neighbor-gene list by taking reference data sets into consideration. To determine whether the given reference data sets are sufficiently informative for integration, we use a submatrix imputation approach. Our experiments showed that iMISS can significantly and consistently improve the accuracy of the state-of-the-art Local Least Square (LLS imputation algorithm by up to 15% improvement in our benchmark tests. Conclusion We demonstrated that the order-statistics-based integrative imputation algorithms can achieve significant improvements over the state-of-the-art missing value estimation approaches such as LLS and is especially good for imputing microarray datasets with a limited number of samples, high rates of missing data, or very noisy measurements. With the rapid accumulation of microarray datasets, the performance of our approach can be further improved by incorporating larger and more appropriate reference datasets.

CDC Vital Signs–HIV and Injection Drug Use

Centers for Disease Control (CDC) Podcasts

This podcast is based on the December 2016 CDC Vital Signs report. Sharing needles, syringes, and other injection equipment puts you at risk for getting HIV and other infections, including hepatitis. Learn how to reduce your HIV risk.

The missed diagnosis

International Nuclear Information System (INIS)

Bundy, A.L.

1988-01-01

One of the questions that haunts the radiologist as he shuffles through piles of films is ''What am I missing?'' This same question takes on even more meaning when the radiologist is pressed for time, when he reluctantly checks the night work of the resident, when the patient left before more or better films could be obtained; or when the radiologist is involved in a subspecialty in which he is not properly trained. According to Dr. Berlin's survey, the missed diagnosis category accounted for the largest number of radiology malpractice cases. We all know that many diagnoses are more easily made using the ''retrospectoscope.'' But is the plaintiff attorney also adept at using this instrument? Just how knowledgeable must the radiologist be in the use of the ''prospectoscope''? A familiarity with cases that have already been tried should at least alert radiologists to the chances of their own involvement in litigation. While the missed diagnosis is by no means peculiar to the radiologist, it is one of the principal reasons that he may find himself in court

Injection Process Control of the Well at the Hydrodynamic Research of Coalbed

Science.gov (United States)

Odnokopylov, I. G.; Galtseva, O. V.; Krasnov, I. Yu; Smirnov, A. O.; Karpov, M. S.; Surzhikova, O. A.; Kuznetsov, V. V.; Li, J.

2017-04-01

This scientific work is devoted to the study results of water injection process into the well at the hydrodynamic research by using the high pressure unregulated pump. The injection process should be accompanied by the retention of some hydraulic parameters at constant level during some time. Various variants for use of mechatronic nodes for automatization of water injection process are considered. Scheme for reducing the load on the pump and equipment in hydraulic system and also for improving the quality control system with high accuracy is shown. Simulation results of injection process into the well at the pressure and consumption fixation and recommendations for the use of the proposed schemes depending on the technological process are given.

Incomplete Early Childhood Immunization Series and Missing Fourth DTaP Immunizations; Missed Opportunities or Missed Visits?

Science.gov (United States)

Robison, Steve G

2013-01-01

The successful completion of early childhood immunizations is a proxy for overall quality of early care. Immunization statuses are usually assessed by up-to-date (UTD) rates covering combined series of different immunizations. However, series UTD rates often only bear on which single immunization is missing, rather than the success of all immunizations. In the US, most series UTD rates are limited by missing fourth DTaP-containing immunizations (diphtheria/tetanus/pertussis) due at 15 to 18 months of age. Missing 4th DTaP immunizations are associated either with a lack of visits at 15 to 18 months of age, or to visits without immunizations. Typical immunization data however cannot distinguish between these two reasons. This study compared immunization records from the Oregon ALERT IIS with medical encounter records for two-year olds in the Oregon Health Plan. Among those with 3 valid DTaPs by 9 months of age, 31.6% failed to receive a timely 4th DTaP; of those without a 4th DTaP, 42.1% did not have any provider visits from 15 through 18 months of age, while 57.9% had at least one provider visit. Those with a 4th DTaP averaged 2.45 encounters, while those with encounters but without 4th DTaPs averaged 2.23 encounters.

Time Series Forecasting with Missing Values

OpenAIRE

Shin-Fu Wu; Chia-Yung Chang; Shie-Jue Lee

2015-01-01

Time series prediction has become more popular in various kinds of applications such as weather prediction, control engineering, financial analysis, industrial monitoring, etc. To deal with real-world problems, we are often faced with missing values in the data due to sensor malfunctions or human errors. Traditionally, the missing values are simply omitted or replaced by means of imputation methods. However, omitting those missing values may cause temporal discontinuity. Imputation methods, o...

Missing value imputation: with application to handwriting data

Science.gov (United States)

Xu, Zhen; Srihari, Sargur N.

2015-01-01

Missing values make pattern analysis difficult, particularly with limited available data. In longitudinal research, missing values accumulate, thereby aggravating the problem. Here we consider how to deal with temporal data with missing values in handwriting analysis. In the task of studying development of individuality of handwriting, we encountered the fact that feature values are missing for several individuals at several time instances. Six algorithms, i.e., random imputation, mean imputation, most likely independent value imputation, and three methods based on Bayesian network (static Bayesian network, parameter EM, and structural EM), are compared with children's handwriting data. We evaluate the accuracy and robustness of the algorithms under different ratios of missing data and missing values, and useful conclusions are given. Specifically, static Bayesian network is used for our data which contain around 5% missing data to provide adequate accuracy and low computational cost.

STUDY ON MATERNAL MORTALITY AND NEAR MISS CASE

Directory of Open Access Journals (Sweden)

Ritanjali Behera

2017-12-01

Full Text Available BACKGROUND Maternal mortality traditionally has been the indicator of maternal health. More recently the review of cases of near miss obstetric event is found to be useful to investigate maternal mortality. Cases of near miss are those, where a woman nearly died but survived a complication that occur during pregnancy or child birth. Aim and Objective 1. To analyse near miss cases and maternal deaths. 2. To determine maternal near miss indicator and to analyse the cause and contributing factors for both of them. MATERIALS AND METHODS This prospective observational study conducted in M.K.C.G. medical college, Berhampur from 1st October 2015 to 30th September 2017. All the cases of maternal deaths and near miss cases defined by WHO criteria are taken. Information regarding demographic profile and reproductive parameters are collected and results are analysed using percentage and proportion. RESULTS Out of 17977 deliveries 201 were near miss cases and 116 were maternal deaths. MMR was 681, near miss incidence 1.18, maternal death to near miss ratio was 1:1.73. Hypertensive disorder of pregnancy (37.4% was the leading cause followed by haemorrhage (17.4%. For near miss cases 101 cases fulfilled clinical criteria, 61 laboratory criteria and 131 cases management based criteria. CONCLUSION Hypertensive disorder of pregnancy and haemorrhage are the leading cause of maternal death and for near miss cases most common organ system involved was cardiovascular system. All the near miss cases should be interpreted as opportunities to improve the health care services.

Zinc injection helps reduce radiation field buildup in BWRs

International Nuclear Information System (INIS)

Wood, C.

1991-01-01

The injection of zinc into the reactor water of BWRs (Boiling Water Reactors) was a technique developed by General Electric (GE) and the Electric Power Research Institute (EPRI) to control the buildup of radiation fields from cobalt-60 on out-of-core piping. The presence of 5-10ppb zinc in the reactor water reduces the growth of oxide films on stainless steel surfaces, thereby reducing the number of sites available for the incorporation of cobalt; zinc also competes with cobalt for the sites. In September 1990, EPRI organized a workshop at the request of several US utilities to provide a forum to discuss experiences with zinc injection. The meeting focused on six main issues: the effect of zinc on radiation fields in normal water chemistry; the radiation buildup in hydrogen water chemistry, with and without zinc; the effects of zinc-65; the corrosion of fuel cladding and structural materials; the performance of zinc injection and monitoring equipment; and planning for zinc injection. (author)

HIV and Injection Drug Use PSA (:60)

Centers for Disease Control (CDC) Podcasts

2016-11-29

This 60 second public service announcement is based on the December 2016 CDC Vital Signs report. Sharing needles, syringes, and other injection equipment puts you at risk for getting HIV and other infections, including hepatitis. Learn how to reduce your HIV risk.  Created: 11/29/2016 by National Center for HIV/AIDS, Viral Hepatitis, Sexual Transmitted Diseases and Tuberculosis Prevention (NCHHSTP).   Date Released: 11/29/2016.

Assessment of the safety of injection practices and injection-related procedures in family health units and centers in Alexandria.

Science.gov (United States)

Elhoseeny, Taghareed A; Mourad, Juidan K

2014-08-01

The Safe Injection Global Network (SIGN) developed an intervention strategy for reducing overuse of injections and promoting the administration of safe injections. Tool C--Revised is designed to assess the safety of the most common procedures that puncture the skin within health services. The aim of the study was to assess injection safety within the primary healthcare facilities in Alexandria using Tool C--Revised. A total of 45 family health units and centers in Alexandria were selected by proportional allocation from the eight regions of Alexandria. The Tool C--Revised of the WHO was used for observation of the entire facility, injection practices and injection-related procedures, and sterilization practices. Interview of different health providers and immediate supervisor of injections was carried out. Indicators that reflect risk included: deficiency of alcohol-based hand rub for cleansing hands (13.3%), compliance with hand wash before preparing a procedure (56.9% before injection practices, 61.3% before phlebotomy, and 67.6% before lancet puncture), and wearing a new pair of gloves before new procedures (48.6% before injection practices, 9.7% for phlebotomy, 11.8% for lancet puncture, and 80% for both intravenous injections and infusions). Enough disposable equipment in all facilities for at least 2 weeks dependent on the statement of the average numbers of procedures per week was shown. Only 38% of the providers had received training regarding injection safety in the last 2 years and 62.5% had completed their three doses of hepatitis B vaccine. Only 42.2% of staffs who handled healthcare waste had access to heavy gloves. Indicators related to injection and injection-related practices that reflect risk to patients include deficiency of alcohol-based hand rub tools, nonadherence to hand hygiene before preparing an injection, and inadequate adherence to using a clean barrier when opening a glass ampule and use of gloves. Indicators that may reflect risk to

Methods for Mediation Analysis with Missing Data

Science.gov (United States)

Zhang, Zhiyong; Wang, Lijuan

2013-01-01

Despite wide applications of both mediation models and missing data techniques, formal discussion of mediation analysis with missing data is still rare. We introduce and compare four approaches to dealing with missing data in mediation analysis including list wise deletion, pairwise deletion, multiple imputation (MI), and a two-stage maximum…

HIV risk-taking behaviour among injecting drug users currently, previously and never enrolled in methadone treatment.

Science.gov (United States)

Baker, A; Kochan, N; Dixon, J; Wodak, A; Heather, N

1995-04-01

This study compares the injecting and sexual risk-taking behaviour among injecting drug users (IDUs) currently, previously and never enrolled in methadone maintenance treatment (MMT). All subjects had injected during the 6 months prior to the day of interview. The current MMT group showed significantly lower injecting risk-taking behaviour subscale scores on the HIV Risk-taking Behaviour Scale (HRBS) of the Opiate Treatment Index than the previous MMT and non-MMT groups together. The current MMT group differed from the other two groups in the frequency of injecting and cleaning of injection equipment with bleach. There was no difference between the current MMT group and the other two groups combined in sexual risk-taking behaviour scores on the HRBS. There were no differences between the previous MMT and non-MMT groups in injecting and sexual risk-taking behaviour. HIV seroprevalence was low and there was no difference in seroprevalence between groups. Thus, IDUs currently enrolled in MMT are at reduced risk for HIV infection when compared with IDUs who have previously or never been enrolled in MMT. However, the absence of a difference between the current MMT and other two groups in frequency of sharing behaviours suggests the need for additional strategies among MMT clients to reduce needle-sharing. Possible strategies include the application of relapse prevention interventions and the availability of sterile injecting equipment in MMT clinics. Further research is needed to identify factors which increase attraction and retention of IDUs to MMT.

Missing transverse energy performance of the CMS detector

Energy Technology Data Exchange (ETDEWEB)

Chatrchyan, Serguei [Yerevan Physics Inst. (Armenia); et al.

2011-09-01

During 2010 the LHC delivered pp collisions with a centre-of-mass energy of 7 TeV. In this paper, the results of comprehensive studies of missing transverse energy as measured by the CMS detector are presented. The results cover the measurements of the scale and resolution for missing transverse energy, and the effects of multiple pp interactions within the same bunch crossings on the scale and resolution. Anomalous measurements of missing transverse energy are studied, and algorithms for their identification are described. The performances of several reconstruction algorithms for calculating missing transverse energy are compared. An algorithm, called missing-transverse-energy significance, which estimates the compatibility of the reconstructed missing transverse energy with zero, is described, and its performance is demonstrated.

Missing transverse energy performance of the CMS detector

International Nuclear Information System (INIS)

2011-01-01

During 2010 the LHC delivered pp collisions with a centre-of-mass energy of 7 TeV. In this paper, the results of comprehensive studies of missing transverse energy as measured by the CMS detector are presented. The results cover the measurements of the scale and resolution for missing transverse energy, and the effects of multiple pp interactions within the same bunch crossings on the scale and resolution. Anomalous measurements of missing transverse energy are studied, and algorithms for their identification are described. The performance of several reconstruction algorithms for calculating missing transverse energy are compared. An algorithm, called missing-transverse-energy significance, which estimates the compatibility of the reconstructed missing transverse energy with zero, is described, and its performance is demonstrated.

Diagnosis of hydatidiform mole by hysterography through transabdominal injection

Energy Technology Data Exchange (ETDEWEB)

Kim, Chung Kyu; Park, Chang Yun; Choi, Byung Sook [Yonsei University College of Medicine, Seoul (Korea, Republic of)

1972-03-15

Molar pregnancy presents a pathologic condition requiring surgery of the uterus promptly as possible although hydatidiform mole itself is a benign disease. In order to remove the mole as quickly as possible, early diagnosis is desirable. In actual practice, however, definite preoperative diagnosis by clinical manifestation is impossible since which is vague or altogether absent symptoms especially in first trimester. Hysterography by transabdominal injection is very valuable and easy procedure for accurate diagnosis of hydatidiform mole which shows typical honey combed, moth eaten or sponge pattern on roentgenography. We have experienced 68 cases of hydatidiform mole during last five and half years. Among them hysterography by transabdominal route was done on 26 cases and shows 96% diagnostic accuracy. One missed case was turned out to be missed abortion. The absence of accidents indicates the harmlessness of the method. We feel the best approach in making diagnosis of hydatidiform mole among clinically borderline and in conclusive for mole pregnancy and its differential diagnosis is by use of transabdominal hysterography.

Diagnosis of hydatidiform mole by hysterography through transabdominal injection

International Nuclear Information System (INIS)

Kim, Chung Kyu; Park, Chang Yun; Choi, Byung Sook

1972-01-01

Molar pregnancy presents a pathologic condition requiring surgery of the uterus promptly as possible although hydatidiform mole itself is a benign disease. In order to remove the mole as quickly as possible, early diagnosis is desirable. In actual practice, however, definite preoperative diagnosis by clinical manifestation is impossible since which is vague or altogether absent symptoms especially in first trimester. Hysterography by transabdominal injection is very valuable and easy procedure for accurate diagnosis of hydatidiform mole which shows typical honey combed, moth eaten or sponge pattern on roentgenography. We have experienced 68 cases of hydatidiform mole during last five and half years. Among them hysterography by transabdominal route was done on 26 cases and shows 96% diagnostic accuracy. One missed case was turned out to be missed abortion. The absence of accidents indicates the harmlessness of the method. We feel the best approach in making diagnosis of hydatidiform mole among clinically borderline and in conclusive for mole pregnancy and its differential diagnosis is by use of transabdominal hysterography

Reducing Misses and Near Misses Related to Multitasking on the Electronic Health Record: Observational Study and Qualitative Analysis.

Science.gov (United States)

Ratanawongsa, Neda; Matta, George Y; Bohsali, Fuad B; Chisolm, Margaret S

2018-02-06

Clinicians' use of electronic health record (EHR) systems while multitasking may increase the risk of making errors, but silent EHR system use may lower patient satisfaction. Delaying EHR system use until after patient visits may increase clinicians' EHR workload, stress, and burnout. We aimed to describe the perspectives of clinicians, educators, administrators, and researchers about misses and near misses that they felt were related to clinician multitasking while using EHR systems. This observational study was a thematic analysis of perspectives elicited from 63 continuing medical education (CME) participants during 2 workshops and 1 interactive lecture about challenges and strategies for relationship-centered communication during clinician EHR system use. The workshop elicited reflection about memorable times when multitasking EHR use was associated with "misses" (errors that were not caught at the time) or "near misses" (mistakes that were caught before leading to errors). We conducted qualitative analysis using an editing analysis style to identify codes and then select representative themes and quotes. All workshop participants shared stories of misses or near misses in EHR system ordering and documentation or patient-clinician communication, wondering about "misses we don't even know about." Risk factors included the computer's position, EHR system usability, note content and style, information overload, problematic workflows, systems issues, and provider and patient communication behaviors and expectations. Strategies to reduce multitasking EHR system misses included clinician transparency when needing silent EHR system use (eg, for prescribing), narrating EHR system use, patient activation during EHR system use, adapting visit organization and workflow, improving EHR system design, and improving team support and systems. CME participants shared numerous stories of errors and near misses in EHR tasks and communication that they felt related to EHR

Evolution of Additively Manufactured Injection Molding Inserts Investigated by Thermal Simulations

DEFF Research Database (Denmark)

Hofstätter, Thomas; Pedersen, David B.; Tosello, Guido

Injection molding using inserts from vat polymerization, an additive manufacturing technology, has been investigated for pilot production and rapid prototyping purposes throughout the past years. A standard mold is equipped with additively manufactured inserts in a rectangular shape of (20 x 20 x 2...

An interference account of the missing-VP effect

Directory of Open Access Journals (Sweden)

Markus eBader

2015-06-01

Full Text Available Sentences with doubly center-embedded relative clauses in which a verb phrase (VP is missing are sometimes perceived as grammatical, thus giving rise to an illusion of grammaticality. In this paper, we provide a new account of why missing-VP sentences, which are both complex and ungrammatical, lead to an illusion of grammaticality, the so-called missing-VP effect. We propose that the missing-VP effect in particular, and processing difficulties with multiply center-embedded clauses more generally, are best understood as resulting from interference during cue-based retrieval. When processing a sentence with double center-embedding, a retrieval error due to interference can cause the verb of an embedded clause to be erroneously attached into a higher clause. This can lead to an illusion of grammaticality in the case of missing-VP sentences and to processing complexity in the case of complete sentences with double center-embedding. Evidence for an interference account of the missing-VP effect comes from experiments that have investigated the missing-VP effect in German using a speeded grammaticality judgments procedure. We review this evidence and then present two new experiments that show that the missing VP effect can be found in German also with less restricting procedures. One experiment was a questionnaire study which required grammaticality judgments from participants but without imposing any time constraints. The second experiment used a self-paced reading procedure and did not require any judgments. Both experiments confirm the prior findings of missing-VP effects in German and also show that the missing-VP effect is subject to a primacy effect as known from the memory literature. Based on this evidence, we argue that an account of missing-VP effects in terms of interference during cue-based retrieval is superior to accounts in terms of limited memory resources or in terms of experience with embedded structures.

Persulfate injection into a gasoline source zone

Science.gov (United States)

Sra, Kanwartej S.; Thomson, Neil R.; Barker, Jim F.

2013-07-01

One pore volume of unactivated sodium persulfate was delivered into an emplaced gasoline residual source zone at CFB Borden. Concentrations of inorganic species (S2O82 -, SO42 -, Na+, dissolved inorganic carbon (DIC)) and selected gasoline compounds (benzene, toluene, ethylbenzene, xylenes, trimethylbenzenes and naphthalene) were monitored across a transect equipped with 90 multilevel sampling points for > 10 months post-injection. Mass loading (M˙) of compounds constructed from the transect data was used for assessment purposes. Breakthrough of inorganic species was observed when the injection slug crossed the monitoring transect. An increase in M indicated persulfate consumption during oxidation of gasoline compounds or degradation due to the interaction with aquifer materials. M increased by > 100% suggesting some mineralization of gasoline compounds during treatment. Mass loading for all the monitored gasoline compounds reduced by 46 to 86% as the inorganic slug crossed the monitoring transect. The cumulative mass discharge across the monitoring transect was 19 to 58% lower than that expected without persulfate injection. After the inorganic injection slug was flushed from the source zone a partial rebound (40 to 80% of baseline levels) of mass discharge of the monitored gasoline compounds was observed. The ensemble of data collected provides insight into the fate and transport of the injected persulfate solution, and the accompanying treatment of a gasoline the source zone.

Ballooning of the papilla during contrast injection: the semaphore of a choledochocele.

Science.gov (United States)

Kim, M H; Myung, S J; Lee, S K; Yoo, B M; Seo, D W; Lee, M H; Jung, S A; Kim, Y S; Min, Y I

1998-09-01

Choledochocele is a rare abnormality involving the intramural segment of the common bile duct. ERCP is essential to demonstrate a choledochocele. The aim of this study was to investigate the duodenoscopic and cholangiographic findings during ERCP. Over a 4-year period, 17 symptomatic patients (8 men, 9 women; age range 45 to 83 years) were identified as having choledochoceles. The diagnosis of choledochocele was made by both duodenoscopic and cholangiographic findings. As a characteristic duodenoscopic finding, the enlarged bulging papilla was noted in 8 patients (47%), whereas a normal-appearing papilla was noted in 9 patients (53%) before the injection of contrast media. However, in all 17 patients progressive enlargement or ballooning of the papilla was noted during contrast injection. The maximum diameter of the choledochocele, determined by cholangiography, was significantly larger (19 +/-4 mm) in patients with initially bulging papilla than in those with normal-appearing papilla (9+/-3 mm) (p < 0.05). Ballooning of the papilla during contrast injection may be a specific duodenoscopic finding for choledochocele. To avoid missing the diagnosis of a choledochocele, especially when it is small, it is important to watch the papilla carefully during contrast injection.

[Hand hygiene technique assessment using electronic equipment in 26 Hungarian healthcare institutions].

Science.gov (United States)

Lehotsky, Ákos; Morvai, Júlia; Szilágyi, László; Bánsághi, Száva; Benkó, Alíz; Haidegger, Tamás

2017-07-01

Hand hygiene is probably the most effective tool of nosocomial infection prevention, however, proper feedback and control is needed to develop the individual hand hygiene practice. Assessing the efficiency of modern education tools, and digital demonstration and verification equipment during their wide-range deployment. 1269 healthcare workers took part in a training organized by our team. The training included the assessment of the participants' hand hygiene technique to identify the most often missed areas. The hand hygiene technique was examined by a digital device. 33% of the participants disinfected their hands incorrectly. The most often missed sites are the fingertips (33% on the left hand, 37% on the right hand) and the thumbs (42% on the left hand, 32% on the right hand). The feedback has a fundamental role in the development of the hand hygiene technique. With the usage of electronic devices feedback can be provided efficiently and simply. Orv Hetil. 2017; 158(29): 1143-1148.

"It Goes on Everywhere": Injection Drug Use in Canadian Federal Prisons.

Science.gov (United States)

van der Meulen, Emily

2017-06-07

International and Canadian research on in-prison injection drug use has documented the frequency of its occurrence as well as some of the resulting consequences such as increased prevalence of HIV and hepatitis C virus. Access to prison-based harm reduction programing is thus important. The aim of this study was to learn from former prisoner experiences and insights on in-prison injection drug use in order to advance and improve access to harm reduction options, in particular prison-based needle and syringe programs (PNSPs). The qualitative and community-based study was conducted in 2014/2015 and included former prisoners from Ontario, Canada (N = 30) who had recent experience of incarceration in a federal prison and knowledge of injection drug use. Data analysis followed the deductive approach, drawing on the expertise of the academic and community-based research team members. Interview and focus group participants disclosed that drugs are readily available in Canadian federal prisons and that equipment used to inject is accessed in a variety of ways, sometimes gained through illicit means and sometimes made by prisoners themselves. Equipment sharing is a frequent occurrence, and disposal of such supplies is rare. Conclusions/Importance: While not yet available in Canada, PNSPs have led to positive outcomes in international contexts, including reductions in needle sharing and transmission of HIV and hepatitis C. Support for PNSPs among numerous Canadian organizations and associations, along with a recent change in government, could suggest a renewed opportunity for PNSP implementation.

Breast carcinomas: why are they missed?

Science.gov (United States)

Muttarak, M; Pojchamarnwiputh, S; Chaiwun, B

2006-10-01

Mammography has proven to be an effective modality for the detection of early breast carcinoma. However, 4-34 percent of breast cancers may be missed at mammography. Delayed diagnosis of breast carcinoma results in an unfavourable prognosis. The objective of this study was to determine the causes and characteristics of breast carcinomas missed by mammography at our institution, with the aim of reducing the rate of missed carcinoma. We reviewed the reports of 13,191 mammograms performed over a five-year period. Breast Imaging Reporting and Data Systems (BI-RADS) were used for the mammographical assessment, and reports were cross-referenced with the histological diagnosis of breast carcinoma. Causes of missed carcinomas were classified. Of 344 patients who had breast carcinoma and had mammograms done prior to surgery, 18 (5.2 percent) failed to be diagnosed by mammography. Of these, five were caused by dense breast parenchyma obscuring the lesions, 11 were due to perception and interpretation errors, and one each from unusual lesion characteristics and poor positioning. Several factors, including dense breast parenchyma obscuring a lesion, perception error, interpretation error, unusual lesion characteristics, and poor technique or positioning, are possible causes of missed breast cancers.

Fear of repeated injections in children younger than 4 years receiving subcutaneous allergy immunotherapy.

Science.gov (United States)

de Vos, Gabriele; Shankar, Viswanathan; Nazari, Ramin; Kooragayalu, Shravan; Smith, Mitchell; Wiznia, Andrew; Rosenstreich, David

2012-12-01

Allergy immunotherapy during early childhood may have potential benefits for the prevention of asthma and allergy morbidity. However, subcutaneous immunotherapy has not yet been prospectively researched in children younger than 4 years, primarily because of safety concerns, including the fear and psychological distress young children may experience with repeated needle injections. To quantify fear in atopic children younger than 4 years with a history of wheezing who are receiving subcutaneous immunotherapy. Fear of injection was graded during a total of 788 immunotherapy injection visits in 18 children (age, 37 months; SD, 9 months) receiving subcutaneous allergy immunotherapy. The parent and the injection nurse assigned fear scores on a scale of 0 to 10 after each injection visit. At the time of analysis, children had a median of 49 injection visits (range, 12-88) during a median study period of 81.5 weeks (range, 15-165 weeks). Fifteen children (83%) lost their fear of injections during the study. A fear score of 0 was achieved after a mean of 8.4 visits (SD, 7.4). The more injection visits were missed, the more likely children were to retain fear of injections (hazard ratio, 0.13; 95% confidence interval, 0.02-1.02; P=.05). Age, adverse events, number of injections at each visit, and change of injection personnel were not associated with increased fear. Our analysis suggests that most children receiving weekly subcutaneous immunotherapy lose their fear of injections during the treatment course. Children with increased intervals between visits may be at higher risk of experiencing fear of injections. clinicaltrial.gov identifier NCT01028560. Copyright © 2012 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Usability of devices for self-injection: results of a formative study on a new disposable pen injector

Directory of Open Access Journals (Sweden)

Lange J

2014-06-01

Full Text Available Jakob Lange,1 Philipp Richard,1 Nick Bradley21Ypsomed AG, Burgdorf, Switzerland; 2Bergo, Glasgow, United KingdomAbstract: This article presents a late-stage formative usability study of a pen-injector platform device. Such devices are used for the subcutaneous delivery of biopharmaceuticals, primarily for self-administration by the patient. The study was conducted with a broad user population, defined to represent user characteristics across a range of indications. The goals of the study were to confirm that the pen could be used without recurring patterns of use errors leading to hazardous situations, to evaluate the comprehension of the instructions for use (IFU, and to determine if training is necessary. In the study, a total of 36 participants in six groups (health care providers, caregivers, adolescents, diabetics with retinopathy, diabetics with neuropathy, and patients with arthritis each read the IFU, prepared the device, and performed two simulated injections into an injection pad. Any use errors, near misses, or deviations from the IFU procedure were recorded. The overall success rate (injection completed by the participant without need for assistance was 94% for the first and 100% for the second injection. Ninety-two percent of the participants reported that they felt confident using the device, 100% found the IFU helpful, and 75% found the device positively comfortable to use. Overall, a total average of 3.35 deviations and errors per user and injection were recorded (there were no near misses. Subtracting the errors without any potential for negative consequences for the injection or the user (trivial deviations, as well as those related to attaching and removing the pen needle (independent of the design of the pen itself, led to an average of 1.31 potentially relevant deviations per user and injection. It was concluded that the pen injector together with the IFU could be safely and efficiently used by all user groups without any

Air injection evaluation in open steam discharge pipes based on ejector equipment theory

International Nuclear Information System (INIS)

Bigu, M.; Nita, I.; Tenescu, M.

2005-01-01

The paper starts from the finding that the calculation method proposed by ANSI B31.1 for open steam discharge pipes (normative 'ANSI/ASMF B31.1-1980 appendix II Non-Mandatory rules for the design of safety valve installation') shows an air injection in steam system without making a quantitative evaluation of this process of air injection in the exhaust steam. For this it is proposed an assimilation of process with an ejection process in which either steam or air is the ejected fluid. The reason of using opened exhaust systems instead of closed exhaust systems is the fact that expansions and especially shock load from discharge valves and especially in exhaust elbow, are not conducted over the pipe system (ventilation tube). In order to estimate the quantity of air flow which enters through the ejection effect the present paper makes use of gas-gas ejectors. The interest for optimal operating of the system is that the air mixture have a value low in comparison with steam flow (i.e. 2-3% or upmost 5-7%). These percents of mixture lead to properly choosing of the ratio of the two pipe diameters (ventilation tube D/ exhaust elbow d). The results show that optimum ratio is between D/d = 1.10 to 1.15 and in extreme cases 1.20. A lower value of ratio is not acceptable because the pipes come in direct contact when expansion and/or hydraulic hammer occur and stresses from exhaust elbow of safety valve are propagated towards ventilation tube. A higher value of the ratio D/d leads to great air injection in ventilation tube and so to an unjustified large diameter of ventilation tube. It must be mention that the optimal ratio is obtained at sub critical flow of ejected air with Mach number lower then unity, at a static pressure between 0.6 to 1.0 bar in mixture zone of the two fluids. (authors)

Air injection evaluation in open steam discharge pipes based on ejector equipment theory

International Nuclear Information System (INIS)

Bigu, M.; Nita, I.; Tenescu, M.

2005-01-01

Full text: The paper starts from the finding that the calculation method proposed by ANSI B31.1 for open steam discharge pipes (normative 'ANSI/ASMF B31.1-1980 appendix II Non-Mandatory rules for the design of safety valve installation') shows an air injection in steam system without making a quantitative evaluation of this process of air injection in the exhaust steam. For this it is proposed an assimilation of process with an ejection process in which either steam or air is the ejected fluid. The reason of using opened exhaust systems instead of closed exhaust systems is the fact that expansions and especially shock load from discharge valves and especially in exhaust elbow, are not conducted over the pipe system (ventilation tube). In order to estimate the quantity of air flow which enters through the ejection effect the present paper makes use of gas-gas ejectors. The interest for optimal operating of the system is that the air mixture have a value low in comparison with steam flow (i.e. 2-3% or upmost 5-7%). These percents of mixture lead to properly choosing of the ratio of the two pipe diameters (ventilation tube D/ exhaust elbow d). The results show that optimum ratio is between D/d = 1.10 to 1.15 and in extreme cases 1.20. A lower value of ratio is not acceptable because the pipes come in direct contact when expansion and/or hydraulic hammer occur and stresses from exhaust elbow of safety valve are propagated towards ventilation tube. A higher value of the ratio D/d leads to great air injection in ventilation tube and so to an unjustified large diameter of ventilation tube. It must be mention that the optimal ratio is obtained at sub critical flow of ejected air with Mach number lower then unity, at a static pressure between 0.6 to 1.0 bar in mixture zone of the two fluids

Bioinspired Computational Approach to Missing Value Estimation

Directory of Open Access Journals (Sweden)

Israel Edem Agbehadji

2018-01-01

Full Text Available Missing data occurs when values of variables in a dataset are not stored. Estimating these missing values is a significant step during the data cleansing phase of a big data management approach. The reason of missing data may be due to nonresponse or omitted entries. If these missing data are not handled properly, this may create inaccurate results during data analysis. Although a traditional method such as maximum likelihood method extrapolates missing values, this paper proposes a bioinspired method based on the behavior of birds, specifically the Kestrel bird. This paper describes the behavior and characteristics of the Kestrel bird, a bioinspired approach, in modeling an algorithm to estimate missing values. The proposed algorithm (KSA was compared with WSAMP, Firefly, and BAT algorithm. The results were evaluated using the mean of absolute error (MAE. A statistical test (Wilcoxon signed-rank test and Friedman test was conducted to test the performance of the algorithms. The results of Wilcoxon test indicate that time does not have a significant effect on the performance, and the quality of estimation between the paired algorithms was significant; the results of Friedman test ranked KSA as the best evolutionary algorithm.

Simulation and control of a HD diesel engine equipped with new EGR technology

NARCIS (Netherlands)

Dekker, H.J.; Sturm, W.L.

1996-01-01

A dynamic model of a Heavy Duty (HD) turbocharged and aftercooled diesel engine was developed. The engine was equipped with high pressure diesel injection, a Variable Geometry Turbine (VGT) and an Exhaust Gas Recirculation (EGR) system. This engine was targeted at meeting EURO4 emission

Three-dimensional analysis of internal flow characteristics in the injection nozzle tip of direct-injection diesel engines; Sanjigen suchi kaiseki ni yoru DI diesel kikan no nenryo funsha nozzle nai ryudo tokusei no kaimei

Energy Technology Data Exchange (ETDEWEB)

Ogawa, H; Matsui, Y; Kimura, S [Nissan Motor Co. Ltd. Tokyo (Japan)

1997-10-01

To reduce the exhaust emissions and fuel consumption of direct-injection diesel engines, it is essential to optimize the fuel injection equipment closely related to combustion and emission characteristics. In this study, three-dimensional computation has been applied to investigate the effects of the injection nozzle specifications (e.g., sac volume, round shape at the inlet of the nozzle hole) and needle tip deviation on internal flow characteristics. The computational results revealed that the effects of the nozzle specifications and needle tip deviation with a smaller needle lift on internal flow characteristics and a general approach to optimize the injection nozzle specifications were obtained. 3 refs., 10 figs., 1 tab.

Injecting behaviour and service use among young injectors in Albania, Moldova, Romania and Serbia.

Science.gov (United States)

Busza, Joanna; Douthwaite, Megan; Bani, Roland; Scutelniciuc, Otilia; Preda, Marian; Simic, Danijela

2013-09-01

This study examines socio-demographic profiles, injecting risk and use of health services among young injectors (15-24) in Albania, Moldova, Romania and Serbia. The objective was to provide age-disaggregated data to identify differences between adolescents (Romania, surveys were conducted in the capitals, respectively, Bucharest and Tirana. Respondents were recruited from 3 cities in Moldova (Chisinau, Balti and Tiraspol) and Serbia (Belgrade, Novi Sad and Nis). Data were collected on risk behaviours, service use and contact with police and other authorities. Analysis focused on associations between unsafe injecting behaviour and key determinants including demographic background, source of needles/syringes, use of harm reduction services and interactions with law enforcement. Although drug use and health-seeking varied across settings, sources of injecting equipment were significantly associated with sharing needles and syringes in Moldova, Romania and Serbia. Obtaining equipment from formal sources (pharmacies, needle-exchange programmes) reduced likelihood of sharing significantly, while being stopped by the police or incarcerated increased it. Adolescents relied on pharmacies more than public sector services to obtain equipment. Adolescents comprise a small proportion of PWID in this region, but have poorer access to harm reduction services than older peers. Engaging young PWID through private and public sector outlets might reduce unsafe practices, while use of the justice system to address drug use complicates efforts to reach this population. Copyright © 2013 Elsevier B.V. All rights reserved.

National equipment of intraoperatory gamma detection in the identification of sentinel lymph node in animal model

International Nuclear Information System (INIS)

Santos, Paula Cristina Fada dos; Santos, Ivan Dunshee de Abranches Oliveira; Nahas, Fabio Xerfan; Ferreira, Lydia Masako; Oliveira Filho, Renato Santos de

2009-01-01

Purpose: To investigate a national equipment of intraoperatory gamma detection in the identification of sentinel lymph node. Methods: Thirty young adult male rats were used. After anesthetized, animals were divided into two groups of 15 animals each. Animals from group A received dextram 500 - Tc 99 radiopharmaceutical and patent blue V and those from group B received only patent blue V to map the lymphatic drainage. The presence of radiation in the background area, in the area of injection and of the ex vivo sentinel lymph node of group A were measured. After the exeresis, each lymph node in group A and in group B was mixed forming a new random sequence and the radioactive reading of each lymph node was carried out, using both pieces of equipment. Results: The hottest sentinel lymph node was identified by the national equipment when radiation was measured in the area of lymphatic drainage after the Dextran 500 was injected. Also, the ex vivo sentinel lymph node. The national equipment has also detected radiation in the lymph nodes that had not received radiopharmaceutical, leading to false positive, checked by the application of Mann-Whitney tests and Student's paired t-tests. The Cronbach alpha has shown high internal consistency of data 0,9416. Conclusions: The national equipment of intraoperatory gamma detection identifies the LS and showed false positives LS and needs improvement. (author)

Compact toroid injection system for JFT-2M

Energy Technology Data Exchange (ETDEWEB)

Fukumoto, N. [University of Hyogo, 2167 Shosha, Himeji, Hyogo 671-2280 (Japan)]. E-mail: fukumotn@eng.u-hyogo.ac.jp; Ogawa, H. [Japan Atomic Energy Agency (JAEA), 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Nagata, M. [University of Hyogo, 2167 Shosha, Himeji, Hyogo 671-2280 (Japan); Uyama, T. [University of Hyogo, 2167 Shosha, Himeji, Hyogo 671-2280 (Japan); Shibata, T. [Japan Atomic Energy Agency (JAEA), 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Kashiwa, Y. [Japan Atomic Energy Agency (JAEA), 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Suzuki, S. [Japan Atomic Energy Agency (JAEA), 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Kusama, Y. [Japan Atomic Energy Agency (JAEA), 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2006-11-15

The compact toroid (CT) injection system for JFT-2M is composed of a CT injector, a gas delivery and vacuum system, a power supply system, and a diagnostics system. In particular, the power supply system delivers high performance for CT formation and acceleration. The CT formation capacitor bank unit achieved a formation current of 350 kA with a rise time less than 10 {mu}s. Although the CT acceleration bank units are equipped with 14 ignitron switches instead of gap switches to attenuate the discharge noise level, an acceleration current of 400 kA with a short rise time of 9 {mu}s is controlled within a jitter of much less than 1 {mu}s. The resulting CT velocity and mass density satisfy the requirements for CT penetration into the tokamak plasma core at a toroidal field of 1 T. This CT injection system is thus suitable for CT injection in a middle-sized tokamak plasma such as the JFT-2M tokamak.

Compact toroid injection system for JFT-2M

International Nuclear Information System (INIS)

Fukumoto, N.; Ogawa, H.; Nagata, M.; Uyama, T.; Shibata, T.; Kashiwa, Y.; Suzuki, S.; Kusama, Y.

2006-01-01

The compact toroid (CT) injection system for JFT-2M is composed of a CT injector, a gas delivery and vacuum system, a power supply system, and a diagnostics system. In particular, the power supply system delivers high performance for CT formation and acceleration. The CT formation capacitor bank unit achieved a formation current of 350 kA with a rise time less than 10 μs. Although the CT acceleration bank units are equipped with 14 ignitron switches instead of gap switches to attenuate the discharge noise level, an acceleration current of 400 kA with a short rise time of 9 μs is controlled within a jitter of much less than 1 μs. The resulting CT velocity and mass density satisfy the requirements for CT penetration into the tokamak plasma core at a toroidal field of 1 T. This CT injection system is thus suitable for CT injection in a middle-sized tokamak plasma such as the JFT-2M tokamak

Planned Missing Data Designs in Educational Psychology Research

NARCIS (Netherlands)

Rhemtulla, M.; Hancock, G.R.

2016-01-01

Although missing data are often viewed as a challenge for applied researchers, in fact missing data can be highly beneficial. Specifically, when the amount of missing data on specific variables is carefully controlled, a balance can be struck between statistical power and research costs. This

Creating Web Sites The Missing Manual

CERN Document Server

MacDonald, Matthew

2006-01-01

Think you have to be a technical wizard to build a great web site? Think again. For anyone who wants to create an engaging web site--for either personal or business purposes--Creating Web Sites: The Missing Manual demystifies the process and provides tools, techniques, and expert guidance for developing a professional and reliable web presence. Like every Missing Manual, you can count on Creating Web Sites: The Missing Manual to be entertaining and insightful and complete with all the vital information, clear-headed advice, and detailed instructions you need to master the task at hand. Autho

Scalable Tensor Factorizations with Missing Data

DEFF Research Database (Denmark)

Acar, Evrim; Dunlavy, Daniel M.; Kolda, Tamara G.

2010-01-01

of missing data, many important data sets will be discarded or improperly analyzed. Therefore, we need a robust and scalable approach for factorizing multi-way arrays (i.e., tensors) in the presence of missing data. We focus on one of the most well-known tensor factorizations, CANDECOMP/PARAFAC (CP...... is shown to successfully factor tensors with noise and up to 70% missing data. Moreover, our approach is significantly faster than the leading alternative and scales to larger problems. To show the real-world usefulness of CP-WOPT, we illustrate its applicability on a novel EEG (electroencephalogram...

Study of the effect of injecting cold or hot water on the operation of an oil field

Energy Technology Data Exchange (ETDEWEB)

Gusein-Zade, M A; Kolosovskaya, A K; Lebedev, V V; Chicherov, L G

1968-11-01

Several Soviet reservoirs contain either highly paraffinic or viscous crude oils, where recovery by an ordinary waterflood is poor. Under such circumstances, hot water injection appears to be advantageous. Hot water injection is advisable when: (1) the reservoir is heterogeneous and contains low-permeability sections; (2) the oil is saturated with paraffin at reservoir temperature; and (3) reservoir pressure is only slightly higher than static pressure. In Uzen field, hot water injection should recover 1.5 times more oil than would be recovered with cold water. Various problems involved with hot water injection such as equipment and methods of heating the water, transportation of the water of the wellhead, heat losses in transport of hot water, and well equipment for handling hot water are discussed. Calculations indicate that it should be possible to transport 100/sup 0/C water through a 5 km pipeline with a 4/sup 0/ to 6/sup 0/C temperature drop; then deliver to the well bottom at a temperature of 90/sup 0/ to 92/sup 0/C.

Compressed air injection technique to standardize block injection pressures : [La technique d'injection d'air comprimé pour normaliser les pressions d'injection d'un blocage nerveux].

Science.gov (United States)

Tsui, Ban C H; Li, Lisa X Y; Pillay, Jennifer J

2006-11-01

Presently, no standardized technique exists to monitor injection pressures during peripheral nerve blocks. Our objective was to determine if a compressed air injection technique, using an in vitro model based on Boyle's law and typical regional anesthesia equipment, could consistently maintain injection pressures below a 1293 mmHg level associated with clinically significant nerve injury. Injection pressures for 20 and 30 mL syringes with various needle sizes ( 18G, 20G, 21 G, 22G, and 24G) were measured in a closed system. A set volume of air was aspirated into a saline-filled syringe and then compressed and maintained at various percentages while pressure was measured. The needle was inserted into the injection port of a pressure sensor, which had attached extension tubing with an injection plug clamped "off". Using linear regression with all data points, the pressure value and 99% confidence interval (CI) at 50% air compression was estimated. The linearity of Boyle's law was demonstrated with a high correlation, r = 0.99, and a slope of 0.984 (99% CI: 0.967-1.001). The net pressure generated at 50% compression was estimated as 744.8 mmHg, with the 99% CI between 729.6 and 760.0 mmHg. The various syringe/needle combinations had similar results. By creating and maintaining syringe air compression at 50% or less, injection pressures will be substantially below the 1293 mmHg threshold considered to be an associated risk factor for clinically significant nerve injury. This technique may allow simple, real-time and objective monitoring during local anesthetic injections while inherently reducing injection speed. Présentement, aucune technique normalisée ne permet de vérifier les pressions d'injection pendant les blocages nerveux périphériques. Nous voulions vérifier si une technique d'injection d'air comprimé, utilisant un modèle in vitro fondé sur la loi de Boyle et du matériel propre à l'anesthésie régionale, pouvait maintenir avec régularité les

Spacecraft intercept guidance using zero effort miss steering

Science.gov (United States)

Newman, Brett

The suitability of proportional navigation, or an equivalent zero effort miss formulation, for spacecraft intercepts during midcourse guidance, followed by a ballistic coast to the endgame, is addressed. The problem is formulated in terms of relative motion in a general 3D framework. The proposed guidance law for the commanded thrust vector orientation consists of the sum of two terms: (1) along the line of sight unit direction and (2) along the zero effort miss component perpendicular to the line of sight and proportional to the miss itself and a guidance gain. If the guidance law is to be suitable for longer range targeting applications with significant ballistic coasting after burnout, determination of the zero effort miss must account for the different gravitational accelerations experienced by each vehicle. The proposed miss determination techniques employ approximations for the true differential gravity effect. Theoretical results are applied to a numerical engagement scenario and the resulting performance is evaluated in terms of the miss distances determined from nonlinear simulation.

External injection systems applied in modern cyclotrons designed and manufactured in NIIEFA

International Nuclear Information System (INIS)

Bogdanov, P.V.; Vasilchenko, I.N.; Veresov, O.L.; Gavrish, Yu.N.; Grigorenko, S.V.; Zuev, Yu.V.; Kozienko, M.T.; Mudrolyubov, V.G.; Strokach, A.P.; Tsygankov, S.S.

2012-01-01

The main parameters and design features of the external injection systems applied in modern cyclotrons designed and manufactured in NIIEFA and intended for production of radionuclides for medicine are presented. The use of these external injection systems instead of a traditional internal source allows the current of the accelerated beam to be significantly increased and the in-leakage of the working gas to the acceleration chamber to be reduced, which results in reduced beam losses in the process of acceleration and lower equipment activation.

Methods to Minimize Zero-Missing Phenomenon

DEFF Research Database (Denmark)

da Silva, Filipe Miguel Faria; Bak, Claus Leth; Gudmundsdottir, Unnur Stella

2010-01-01

With the increasing use of high-voltage AC cables at transmission levels, phenomena such as current zero-missing start to appear more often in transmission systems. Zero-missing phenomenon can occur when energizing cable lines with shunt reactors. This may considerably delay the opening of the ci...

Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling.

Science.gov (United States)

Martinho, Graça; Pires, Ana; Saraiva, Luanha; Ribeiro, Rita

2012-06-01

This paper describes a direct analysis study carried out in a recycling unit for waste electrical and electronic equipment (WEEE) in Portugal to characterize the plastic constituents of WEEE. Approximately 3400 items, including cooling appliances, small WEEE, printers, copying equipment, central processing units, cathode ray tube (CRT) monitors and CRT televisions were characterized, with the analysis finding around 6000 kg of plastics with several polymer types. The most common polymers are polystyrene, acrylonitrile-butadiene-styrene, polycarbonate blends, high-impact polystyrene and polypropylene. Additives to darken color are common contaminants in these plastics when used in CRT televisions and small WEEE. These additives can make plastic identification difficult, along with missing polymer identification and flame retardant identification marks. These drawbacks contribute to the inefficiency of manual dismantling of WEEE, which is the typical recycling process in Portugal. The information found here can be used to set a baseline for the plastics recycling industry and provide information for ecodesign in electrical and electronic equipment production. Copyright © 2012 Elsevier Ltd. All rights reserved.

Persulfate injection into a gasoline source zone.

Science.gov (United States)

Sra, Kanwartej S; Thomson, Neil R; Barker, Jim F

2013-07-01

One pore volume of unactivated sodium persulfate was delivered into an emplaced gasoline residual source zone at CFB Borden. Concentrations of inorganic species (S2O8(2-), SO4(2-), Na(+), dissolved inorganic carbon (DIC)) and selected gasoline compounds (benzene, toluene, ethylbenzene, xylenes, trimethylbenzenes and naphthalene) were monitored across a transect equipped with 90 multilevel sampling points for >10months post-injection. Mass loading (M˙) of compounds constructed from the transect data was used for assessment purposes. Breakthrough of inorganic species was observed when the injection slug crossed the monitoring transect. An increase in [Formula: see text] indicated persulfate consumption during oxidation of gasoline compounds or degradation due to the interaction with aquifer materials. M˙DIC increased by >100% suggesting some mineralization of gasoline compounds during treatment. Mass loading for all the monitored gasoline compounds reduced by 46 to 86% as the inorganic slug crossed the monitoring transect. The cumulative mass discharge across the monitoring transect was 19 to 58% lower than that expected without persulfate injection. After the inorganic injection slug was flushed from the source zone a partial rebound (40 to 80% of baseline levels) of mass discharge of the monitored gasoline compounds was observed. The ensemble of data collected provides insight into the fate and transport of the injected persulfate solution, and the accompanying treatment of a gasoline the source zone. Copyright © 2013 Elsevier B.V. All rights reserved.

Clustering with Missing Values: No Imputation Required

Science.gov (United States)

Wagstaff, Kiri

2004-01-01

Clustering algorithms can identify groups in large data sets, such as star catalogs and hyperspectral images. In general, clustering methods cannot analyze items that have missing data values. Common solutions either fill in the missing values (imputation) or ignore the missing data (marginalization). Imputed values are treated as just as reliable as the truly observed data, but they are only as good as the assumptions used to create them. In contrast, we present a method for encoding partially observed features as a set of supplemental soft constraints and introduce the KSC algorithm, which incorporates constraints into the clustering process. In experiments on artificial data and data from the Sloan Digital Sky Survey, we show that soft constraints are an effective way to enable clustering with missing values.

Missing data in trauma registries: A systematic review.

Science.gov (United States)

Shivasabesan, Gowri; Mitra, Biswadev; O'Reilly, Gerard M

2018-03-30

Trauma registries play an integral role in trauma systems but their valid use hinges on data quality. The aim of this study was to determine, among contemporary publications using trauma registry data, the level of reporting of data completeness and the methods used to deal with missing data. A systematic review was conducted of all trauma registry-based manuscripts published from 01 January 2015 to current date (17 March 2017). Studies were identified by searching MEDLINE, EMBASE, and CINAHL using relevant subject headings and keywords. Included manuscripts were evaluated based on previously published recommendations regarding the reporting and discussion of missing data. Manuscripts were graded on their degree of characterization of such observations. In addition, the methods used to manage missing data were examined. There were 539 manuscripts that met inclusion criteria. Among these, 208 (38.6%) manuscripts did not mention data completeness and 88 (16.3%) mentioned missing data but did not quantify the extent. Only a handful (n = 26; 4.8%) quantified the 'missingness' of all variables. Most articles (n = 477; 88.5%) contained no details such as a comparison between patient characteristics in cohorts with and without missing data. Of the 331 articles which made at least some mention of data completeness, the method of managing missing data was unknown in 34 (10.3%). When method(s) to handle missing data were identified, 234 (78.8%) manuscripts used complete case analysis only, 18 (6.1%) used multiple imputation only and 34 (11.4%) used a combination of these. Most manuscripts using trauma registry data did not quantify the extent of missing data for any variables and contained minimal discussion regarding missingness. Out of the studies which identified a method of managing missing data, most used complete case analysis, a method that may bias results. The lack of standardization in the reporting and management of missing data questions the validity of

Substituting missing data in compositional analysis

Energy Technology Data Exchange (ETDEWEB)

Real, Carlos, E-mail: carlos.real@usc.es [Area de Ecologia, Departamento de Biologia Celular y Ecologia, Escuela Politecnica Superior, Universidad de Santiago de Compostela, 27002 Lugo (Spain); Angel Fernandez, J.; Aboal, Jesus R.; Carballeira, Alejo [Area de Ecologia, Departamento de Biologia Celular y Ecologia, Facultad de Biologia, Universidad de Santiago de Compostela, 15782 Santiago de Compostela (Spain)

2011-10-15

Multivariate analysis of environmental data sets requires the absence of missing values or their substitution by small values. However, if the data is transformed logarithmically prior to the analysis, this solution cannot be applied because the logarithm of a small value might become an outlier. Several methods for substituting the missing values can be found in the literature although none of them guarantees that no distortion of the structure of the data set is produced. We propose a method for the assessment of these distortions which can be used for deciding whether to retain or not the samples or variables containing missing values and for the investigation of the performance of different substitution techniques. The method analyzes the structure of the distances among samples using Mantel tests. We present an application of the method to PCDD/F data measured in samples of terrestrial moss as part of a biomonitoring study. - Highlights: > Missing values in multivariate data sets must be substituted prior to analysis. > The substituted values can modify the structure of the data set. > We developed a method to estimate the magnitude of the alterations. > The method is simple and based on the Mantel test. > The method allowed the identification of problematic variables in a sample data set. - A method is presented for the assessment of the possible distortions in multivariate analysis caused by the substitution of missing values.

Software for handling and replacement of missing data

Directory of Open Access Journals (Sweden)

Mayer, Benjamin

2009-10-01

Full Text Available In medical research missing values often arise in the course of a data analysis. This fact constitutes a problem for different reasons, so e.g. standard methods for analyzing data lead to biased estimates and a loss of statistical power due to missing values, since those methods require complete data sets and therefore omit incomplete cases for the analyses. Furthermore missing values imply a certain loss of information for what reason the validity of results of a study with missing values has to be rated less than in a case where all data had been available. For years there are methods for replacement of missing values (Rubin, Schafer to tackle these problems and solve them in parts. Hence in this article we want to present the existing software to handle and replace missing values on the one hand and give an outline about the available options to get information on the other hand. The methodological aspects of the replacement strategies are delineated just briefly in this article.

Nursing care missed in patients at risk of or having pressure ulcers.

Science.gov (United States)

Valles, Jonathan Hermayn Hernández; Monsiváis, María Guadalupe Moreno; Guzmán, Ma Guadalupe Interial; Arreola, Leticia Vázquez

2016-11-21

to determine the nursing care missed as perceived by the nursing staff and its relation with the nursing care missed identified in the assessment of patients at risk of or having pressur ulcers. descriptive correlation study. The participants were 161 nurses and 483 patients from a public hospital. The MISSCARE survey was used in combination with a Nursing Care Assessment Form for Patients at Risk of or having pressure ulcers. For the analysis, descriptive and inferential statistics were used. the nursing staff indicated greater omission in skin care (38.5%), position change (31.1%) and the registration of risk factors for the development of pressure ulcers (33.5%). The nursing care missed identified in the assessment related to the use of pressure relief on bony prominences and drainage tubes interfering in the patient's movements (both with 58.6%) and the use of pneumatic mattresses (57.6%). a high percentage of nursing care missed was found according to the staff's perception. Nevertheless, the assessment of the nursing care missed was much higher. No significant relation was found between both. Therefore, it is a priority to reflect on the importance of objective patient assessments. determinar o cuidado de enfermagem omitido percebido pela equipe de enfermagem e sua relação com o cuidado omitido identificado na avaliação de pacientes com risco ou com de úlceras por pressão. estudo descritivo correlacional. Participaram 161 enfermeiras e 483 pacientes de um hospital público. Foram utilizados o levantamento MISSCARE e um Formulário de Avaliação de Cuidados de Enfermagem em Pacientes com Risco ou com úlceras por pressão. Para a análise foi utilizada estatística descritiva e inferencial. a equipe de enfermagem assinalou que há maior omissão no cuidado da pele (38,5%), reposicionamento (31,1%) e no registro de fatores de risco para o aparecimento de úlceras por pressão (33,5%). Os cuidados de enfermagem omitidos identificados na avaliação foram

Legal syringe purchases by injection drug users, Brooklyn and Queens, New York City, 2000-2001.

Science.gov (United States)

Des Jarlais, Don C; McKnight, Courtney; Friedmann, Patricia

2002-01-01

To assess preliminary results of the Expanded Syringe Access Demonstration Program (ESAP) in New York City. Temporal trends of pharmacy use among injection drug users (IDUs) in Brooklyn and Queens were analyzed from December 2000 through December 2001. Brooklyn and Queens, New York City. PARTIPANTS: IDUs. Attempts to purchase syringes from pharmacies and success in doing so. Of the 1,072 IDUs interviewed from December 2000 through December 2001, the majority were daily heroin injectors, but there was also substantial speedball and cocaine injection. There was a clear increase over time in both the percentage of subjects who attempted to purchase syringes in pharmacies and in the percentage who successfully purchased syringes. Among IDUs interviewed 4 or more months after ESAP began, large majorities of those who attempted to purchase syringes were successful in doing so. No differences in use of ESAP by IDUs were identified in Brooklyn versus Queens: 27% of IDUs interviewed in Queens reported that they had attempted to purchase syringes in pharmacies versus 28% in Brooklyn. Persons who reported injecting on a daily or more frequent basis were more likely to have attempted pharmacy purchases than persons who reported injecting less frequently, 32% versus 21%. The ESAP program has led to an increase in the use of pharmacies as sources of sterile injection equipment among IDUs in New York City. The extent to which pharmacies become an important source of sterile injection equipment and the effect of legal pharmacy sales on risk behaviors for human immunodeficiency virus (HIV) infection remain to be determined.

Impact of teamwork on missed care in four Australian hospitals.

Science.gov (United States)

Chapman, Rose; Rahman, Asheq; Courtney, Mary; Chalmers, Cheyne

2017-01-01

Investigate effects of teamwork on missed nursing care across a healthcare network in Australia. Missed care is universally used as an indicator of quality nursing care, however, little is known about mitigating effects of teamwork on these events. A descriptive exploratory study. Missed Care and Team Work surveys were completed by 334 nurses. Using Stata software, nursing staff demographic information and components of missed care and teamwork were compared across the healthcare network. Statistical tests were performed to identify predicting factors for missed care. The most commonly reported components of missed care were as follows: ambulation three times per day (43·3%), turning patient every two hours (29%) and mouth care (27·7%). The commonest reasons mentioned for missed care were as follows: inadequate labour resources (range 69·8-52·7%), followed by material resources (range 59·3-33·3%) and communication (range 39·3-27·2%). There were significant differences in missed care scores across units. Using the mean scores in regression correlation matrix, the negative relationship of missed care and teamwork was supported (r = -0·34, p teamwork alone accounted for about 9% of missed nursing care. Similar to previous international research findings, our results showed nursing teamwork significantly impacted on missed nursing care. Teamwork may be a mitigating factor to address missed care and future research is needed. These results may provide administrators, educators and clinicians with information to develop practices and policies to improve patient care internationally. © 2016 John Wiley & Sons Ltd.

Impact of a longitudinal community HIV intervention targeting injecting drug users' stage of change for condom and bleach use.

Science.gov (United States)

Jamner, M S; Wolitski, R J; Corby, N H

1997-01-01

To evaluate the impact of the Long Beach AIDS Community Demonstration Project, a community-based HIV-prevention intervention incorporating principles from the Transtheoretical model in its design and evaluation. Repeated cross-sectional sampling with matched intervention and comparison communities. Neighborhoods in Long Beach, California, having a high prevalence of drug abuse and prostitution. 3081 injecting drug users who were sexually active and/or shared injection equipment. Trained peer volunteers distributed fliers featuring role model stories targeted to the population's stage of change. Fliers were packaged with bleaching kits and/or condoms. Primary outcome measures were exposure to the intervention, condom carrying, and stage of change for disinfecting injection equipment with bleach and for using condoms with main and other partners. Toward the end of the study, 77% of injection drug users in the intervention area reported being exposed to the intervention. In the intervention area, rates of condom carrying increased from 10 to 27% (p project exposure had higher stage-of-change scores for using condoms with a main partner (p Project intervention for reaching injecting drug users in the community and for motivating the adoption of risk-reducing practices.

Maternal Near-Miss: A Multicenter Surveillance in Kathmandu Valley

Directory of Open Access Journals (Sweden)

Ashma Rana

2013-06-01

Full Text Available Introduction: Multicenter surveillance has been carried out on maternal near-miss in the hospitals with sentinel units. Near-miss is recognized as the predictor of level of care and maternal death. Reducing maternal mortality ratio is one of the challenges to achieve Millennium Development Goal. Objective was to determine the frequency and the nature of near-miss (severe acute maternal morbidity events and analysis of near-miss morbidities among pregnant women. Methods: Prospective surveillance was done for a year in 2012 in nine hospitals in Kathmandu valley. Cases eligible by definition recorded as a census based on WHO near-miss guideline. Similar questionnaire and dummy tables were used to present the result by non-inferential statistics. Results: Out of 157 cases identified with near-miss rate of 3.8, severe complications were PPH (40% and preeclampsia-eclampsia (17%. Blood transfusion (65%, ICU admission (54% and surgery (32% were the common critical intervention. Oxytocin was the main uterotonic used both prophylactically (86% and therapeutically (76%, and 19% arrived health facility after delivery or abortion. MgSO4 was used in all cases of eclampsia. All of the laparotomies were performed within 3 hours of arrival. Near-miss to mortality ratio was 6:1 and MMR 62. Conclusions: Study result yields similar pattern amongst developing countries and same near-miss conditions as the causes of maternal death reported by national statistics. Process indicators qualify the recommended standard of care. The near-miss event can be used as a surrogate marker of maternal death and a window for system level intervention. Keywords: abortion, eclampsia, hemorrhage, near-miss, surveillance

Netbooks The Missing Manual

CERN Document Server

Biersdorfer, J

2009-01-01

Netbooks are the hot new thing in PCs -- small, inexpensive laptops designed for web browsing, email, and working with web-based programs. But chances are you don't know how to choose a netbook, let alone use one. Not to worry: with this Missing Manual, you'll learn which netbook is right for you and how to set it up and use it for everything from spreadsheets for work to hobbies like gaming and photo sharing. Netbooks: The Missing Manual provides easy-to-follow instructions and lots of advice to help you: Learn the basics for using a Windows- or Linux-based netbookConnect speakers, printe

PCs The Missing Manual

CERN Document Server

Karp, David

2005-01-01

Your vacuum comes with one. Even your blender comes with one. But your PC--something that costs a whole lot more and is likely to be used daily and for tasks of far greater importance and complexity--doesn't come with a printed manual. Thankfully, that's not a problem any longer: PCs: The Missing Manual explains everything you need to know about PCs, both inside and out, and how to keep them running smoothly and working the way you want them to work. A complete PC manual for both beginners and power users, PCs: The Missing Manual has something for everyone. PC novices will appreciate the una

What's missing in missing data? Omissions in survey responses among parents of children with advanced cancer.

Science.gov (United States)

Rosenberg, Abby R; Dussel, Veronica; Orellana, Liliana; Kang, Tammy; Geyer, J Russel; Feudtner, Chris; Wolfe, Joanne

2014-08-01

Missing data is a common phenomenon with survey-based research; patterns of missing data may elucidate why participants decline to answer certain questions. To describe patterns of missing data in the Pediatric Quality of Life and Evaluation of Symptoms Technology (PediQUEST) study, and highlight challenges in asking sensitive research questions. Cross-sectional, survey-based study embedded within a randomized controlled trial. Three large children's hospitals: Dana-Farber/Boston Children's Cancer and Blood Disorders Center (DF/BCCDC); Children's Hospital of Philadelphia (CHOP); and Seattle Children's Hospital (SCH). At the time of their child's enrollment, parents completed the Survey about Caring for Children with Cancer (SCCC), including demographics, perceptions of prognosis, treatment goals, quality of life, and psychological distress. Eighty-six of 104 parents completed surveys (83% response). The proportion of missing data varied by question type. While 14 parents (16%) left demographic fields blank, over half (n=48; 56%) declined to answer at least one question about their child's prognosis, especially life expectancy. The presence of missing data was unrelated to the child's diagnosis, time from progression, time to death, or parent distress (p>0.3 for each). Written explanations in survey margins suggested that addressing a child's life expectancy is particularly challenging for parents. Parents of children with cancer commonly refrain from answering questions about their child's prognosis, however, they may be more likely to address general cure likelihood than explicit life expectancy. Understanding acceptability of sensitive questions in survey-based research will foster higher quality palliative care research.

Substituting missing data in compositional analysis

International Nuclear Information System (INIS)

Real, Carlos; Angel Fernandez, J.; Aboal, Jesus R.; Carballeira, Alejo

2011-01-01

Multivariate analysis of environmental data sets requires the absence of missing values or their substitution by small values. However, if the data is transformed logarithmically prior to the analysis, this solution cannot be applied because the logarithm of a small value might become an outlier. Several methods for substituting the missing values can be found in the literature although none of them guarantees that no distortion of the structure of the data set is produced. We propose a method for the assessment of these distortions which can be used for deciding whether to retain or not the samples or variables containing missing values and for the investigation of the performance of different substitution techniques. The method analyzes the structure of the distances among samples using Mantel tests. We present an application of the method to PCDD/F data measured in samples of terrestrial moss as part of a biomonitoring study. - Highlights: → Missing values in multivariate data sets must be substituted prior to analysis. → The substituted values can modify the structure of the data set. → We developed a method to estimate the magnitude of the alterations. → The method is simple and based on the Mantel test. → The method allowed the identification of problematic variables in a sample data set. - A method is presented for the assessment of the possible distortions in multivariate analysis caused by the substitution of missing values.

Safety systems I/C equipment reliability analyses of the Kozloduy NPP units 3 and 4

Energy Technology Data Exchange (ETDEWEB)

Halev, G; Christov, N [Risk Engineering Ltd., Sofia (Bulgaria)

1996-12-31

The purpose of the analysis is to assess the safety systems I/C equipment reliability. The assessment includes: quantification of the safety systems unavailability due to component failures; definition of the minimal cut sets leading to the analysed safety systems failure; quantification of the I/C equipment importance measures of the dominant contribution components. The safety systems I/C equipment reliability has been analysed using PSAPACK (a code for probabilistic safety assessment). Fault trees for the following safety systems of the Kozloduy-3 and Kozloduy-4 reactors have been constructed: neutron flow control equipment, reactor protection system, main coolant pumps, pressurizer safety valves `Sempell`, steam dump systems, spray system, low pressure injection system, emergency feeding water system, essential service water system. THree separate reports have been issued containing the performed analyses and results. 1 ref.

Simulation of the injection casting of metallic fuels

International Nuclear Information System (INIS)

Nakagawa, Tomokazu; Ogata, Takanari; Tokiwai, Moriyasu.

1989-01-01

For the fabrication of metallic fuel pins, injection casting is a preferable process because the simplicity of the process is suitable for remote operation. In this process, the molten metal in the crucible is injected into evacuated molds (suspended above the crucible) by pressurizing the casting furnace. Argonne National Laboratory has already adopted this process in the Integral Fast Reactor program. To obtain fuel pins with good quality, the casting parameters, such as the molten metal temperature, the magnitude of the pressure applied, the pressurizing rate, the cooling time, etc., must be optimized. Otherwise, bad-quality castings (short castings, rough surfaces, shrinkage cavities, mold fracture) may result. Therefore, it is very important in designing the casting equipment and optimizing the operation conditions to be able to predict the fluid and thermal behavior of the castings. This paper describes methods to simulate the heat and mass transfer in the molds and molten metallic fuel during injection casting. The results obtained by simulation are compared with experimental ones. Also, appropriate casting conditions for the uranium-plutonium-zirconium alloy are discussed based on the simulated results

Study of status of safe injection practice and knowledge regarding injection safety among primary health care workers in Baglung district, western Nepal.

Science.gov (United States)

Gyawali, Sudesh; Rathore, Devendra S; Kc, Bhuvan; Shankar, P Ravi

2013-01-03

Unsafe injection practices and injection overuse are widespread in developing countries harming the patient and inviting risks to the health care workers. In Nepal, there is a dearth of documented information about injection practices so the present study was carried out: a) to determine whether the selected government health facilities satisfy the conditions for safe injections in terms of staff training, availability of sterile injectable equipment and their proper disposal after use and b) to assess knowledge and attitudes of healthcare workers in these health care facilities with regard to injection safety. A descriptive cross-sectional mixed type (qualitative and quantitative) survey was carried out from 18th May to 16th June 2012. In-depth interviews with the in-charges were conducted using a semi-structured questionnaire. Observation of the health facilities using a structured observation tool was done. The data were analysed manually by summarizing, tabulating and presenting in various formats. The in-charges (eight males, two females) who participated in the study ranged in age from 30 to 50 years with a mean age of 37.8 years. Severe infection followed by pain was the most important cause for injection use with injection Gentamicin being most commonly prescribed. New single use (disposable) injections and auto-disable syringes were used to inject curative drugs and vaccines respectively. Sufficient safety boxes were also supplied to dispose the used syringe. All health care workers had received full course of Hepatitis B vaccine and were knowledgeable about at least one pathogen transmitted through unsafe injection practices. Injection safety management policy and waste disposal guideline was not available for viewing in any of the facilities. The office staff who disposed the bio-medical wastes did so without taking any safety measures. Moreover, none of these staff had received any formal training in waste management. Certain safe injection

Study of status of safe injection practice and knowledge regarding injection safety among primary health care workers in Baglung district, western Nepal

Directory of Open Access Journals (Sweden)

Gyawali Sudesh

2013-01-01

Full Text Available Abstract Background Unsafe injection practices and injection overuse are widespread in developing countries harming the patient and inviting risks to the health care workers. In Nepal, there is a dearth of documented information about injection practices so the present study was carried out: a to determine whether the selected government health facilities satisfy the conditions for safe injections in terms of staff training, availability of sterile injectable equipment and their proper disposal after use and b to assess knowledge and attitudes of healthcare workers in these health care facilities with regard to injection safety. Methodology A descriptive cross-sectional mixed type (qualitative and quantitative survey was carried out from 18th May to 16th June 2012. In-depth interviews with the in-charges were conducted using a semi-structured questionnaire. Observation of the health facilities using a structured observation tool was done. The data were analysed manually by summarizing, tabulating and presenting in various formats. Results The in-charges (eight males, two females who participated in the study ranged in age from 30 to 50 years with a mean age of 37.8 years. Severe infection followed by pain was the most important cause for injection use with injection Gentamicin being most commonly prescribed. New single use (disposable injections and auto-disable syringes were used to inject curative drugs and vaccines respectively. Sufficient safety boxes were also supplied to dispose the used syringe. All health care workers had received full course of Hepatitis B vaccine and were knowledgeable about at least one pathogen transmitted through unsafe injection practices. Injection safety management policy and waste disposal guideline was not available for viewing in any of the facilities. The office staff who disposed the bio-medical wastes did so without taking any safety measures. Moreover, none of these staff had received any formal

A systematic review of missed opportunities for improving tuberculosis and HIV/AIDS control in Sub-saharan Africa: what is still missed by health experts?

Science.gov (United States)

Keugoung, Basile; Fouelifack, Florent Ymele; Fotsing, Richard; Macq, Jean; Meli, Jean; Criel, Bart

2014-01-01

In sub-Saharan Africa, HIV/AIDS and tuberculosis are major public health problems. In 2010, 64% of the 34 million of people infected with HIV were reported to be living in sub-Saharan Africa. Only 41% of eligible HIV-positive people had access to antiretroviral therapy (ART). Regarding tuberculosis, in 2010, the region had 12% of the world's population but reported 26% of the 8.8 million incident cases and 254000 tuberculosis-related deaths. This paper aims to review missed opportunities for improving HIV/AIDS and tuberculosis prevention and care. We conducted a systematic review in PubMed using the terms 'missed'(Title) AND 'opportunities'(Title). We included systematic review and original research articles done in sub-Saharan Africa on missed opportunities in HIV/AIDS and/or tuberculosis care. Missed opportunities for improving HIV/AIDS and/or tuberculosis care can be classified into five categories: i) patient and community; ii) health professional; iii) health facility; iv) local health system; and v) vertical programme (HIV/AIDS and/or tuberculosis control programmes). None of the reviewed studies identified any missed opportunities related to health system strengthening. Opportunities that are missed hamper tuberculosis and/or HIV/AIDS care in sub-Saharan Africa where health systems remain weak. What is still missing in the analysis of health experts is the acknowledgement that opportunities that are missed to strengthen health systems also undermine tuberculosis and HIV/AIDS prevention and care. Studying why these opportunities are missed will help to understand the rationales behind the missed opportunities, and customize adequate strategies to seize them and for effective diseases control.

All hypertopologies are hit-and-miss

Directory of Open Access Journals (Sweden)

Somshekhar Naimpally

2002-04-01

Full Text Available We solve a long standing problem by showing that all known hypertopologies are hit-and-miss. Our solution is not merely of theoretical importance. This representation is useful in the study of comparison of the Hausdorff-Bourbaki or H-B uniform topologies and the Wijsman topologies among themselves and with others. Up to now some of these comparisons needed intricate manipulations. The H-B uniform topologies were the subject of intense activity in the 1960's in connection with the Isbell-Smith problem. We show that they are proximally locally finite topologies from which the solution to the above problem follows easily. It is known that the Wijsman topology on the hyperspace is the proximal ball (hit-and-miss topology in”nice” metric spaces including the normed linear spaces. With the introduction of a new far-miss topology we show that the Wijsman topology is hit-and-miss for all metric spaces. From this follows a natural generalization of the Wijsman topology to the hyperspace of any T1 space. Several existing results in the literature are easy consequences of our work.

Dealing with gene expression missing data.

Science.gov (United States)

Brás, L P; Menezes, J C

2006-05-01

Compared evaluation of different methods is presented for estimating missing values in microarray data: weighted K-nearest neighbours imputation (KNNimpute), regression-based methods such as local least squares imputation (LLSimpute) and partial least squares imputation (PLSimpute) and Bayesian principal component analysis (BPCA). The influence in prediction accuracy of some factors, such as methods' parameters, type of data relationships used in the estimation process (i.e. row-wise, column-wise or both), missing rate and pattern and type of experiment [time series (TS), non-time series (NTS) or mixed (MIX) experiments] is elucidated. Improvements based on the iterative use of data (iterative LLS and PLS imputation--ILLSimpute and IPLSimpute), the need to perform initial imputations (modified PLS and Helland PLS imputation--MPLSimpute and HPLSimpute) and the type of relationships employed (KNNarray, LLSarray, HPLSarray and alternating PLS--APLSimpute) are proposed. Overall, it is shown that data set properties (type of experiment, missing rate and pattern) affect the data similarity structure, therefore influencing the methods' performance. LLSimpute and ILLSimpute are preferable in the presence of data with a stronger similarity structure (TS and MIX experiments), whereas PLS-based methods (MPLSimpute, IPLSimpute and APLSimpute) are preferable when estimating NTS missing data.

Selection of equipment for equipment qualification

International Nuclear Information System (INIS)

Torr, K.G.

1989-01-01

This report describes the methodology applied in selecting equipment in the special safety systems for equipment qualification in the CANDU 600 MW nuclear generating stations at Gentilly 2 and Point Lepreau. Included is an explanation of the selection procedure adopted and the rationale behind the criteria used in identifying the equipment. The equipment items on the list have been grouped into three priority categories as a planning aid to AECB staff for a review of the qualification status of the special safety systems

Syringe access for the prevention of blood borne infections among injection drug users

Directory of Open Access Journals (Sweden)

Rich Josiah D

2003-11-01

Full Text Available Abstract Background Approximately one-third of acquired immunodeficiency syndrome cases in the United States are associated with the practice of sharing of injection equipment and are preventable through the once-only use of syringes, needles and other injection equipment. Discussion Sterile syringes may be obtained legally by 4 methods depending on the state. They may be purchased over the counter, prescribed, obtained at syringe exchange programs or furnished by authorized agencies. Each of these avenues has advantages and disadvantages; therefore, legal access through all means is the most likely way to promote the use of sterile syringes. Summary By assisting illicit drug injectors to obtain sterile syringes the primary care provider is able to reduce the incidence of blood borne infections, and educate patients about safe syringe disposal. The provider is also able to initiate discussion about drug use in a nonjudgmental manner and to offer care to patients who are not yet ready to consider drug treatment.

Maternal near-miss: a multicenter surveillance in Kathmandu Valley.

Science.gov (United States)

Rana, Ashma; Baral, Gehanath; Dangal, Ganesh

2013-01-01

Multicenter surveillance has been carried out on maternal near-miss in the hospitals with sentinel units. Near-miss is recognized as the predictor of level of care and maternal death. Reducing Maternal Mortality Ratio is one of the challenges to achieve Millennium Development Goal. The objective was to determine the frequency and the nature of near-miss events and to analyze the near-miss morbidities among pregnant women. A prospective surveillance was done for a year in 2012 at nine hospitals in Kathmandu valley. Cases eligible by definition were recorded as a census based on WHO near-miss guideline. Similar questionnaires and dummy tables were used to present the results by non-inferential statistics. Out of 157 cases identified with near-miss rate of 3.8 per 1000 live births, severe complications were postpartum hemorrhage 62 (40%) and preeclampsia-eclampsia 25 (17%). Blood transfusion 102 (65%), ICU admission 85 (54%) and surgery 53 (32%) were common critical interventions. Oxytocin was main uterotonic used both prophylactically and therapeutically at health facilities. Total of 30 (19%) cases arrived at health facility after delivery or abortion. MgSO4 was used in all cases of eclampsia. All laparotomies were performed within three hours of arrival. Near-miss to maternal death ratio was 6:1 and MMR was 62. Study result yielded similar pattern amongst developing countries and same near-miss conditions as the causes of maternal death reported by national statistics. Process indicators qualified the recommended standard of care. The near-miss event could be used as a surrogate marker of maternal death and a window for system level intervention.

IMPROVED WELL PLUGGING EQUIPMENT AND WASTE MANGEMENT TECHNIQUES EXCEED ALARA GOALS AT THE OAK RIDGE NATIONAL LABORATORY

International Nuclear Information System (INIS)

Whiteside, R.; Pawlowicz, R.; Whitehead, L.; Arnseth, R.

2002-01-01

In 2000, Bechtel Jacobs Company LLC (BJC) contracted Tetra Tech NUS, Inc. (TtNUS) and their sub-contractor, Texas World Operations, Inc. (TWO), to plug and abandon (P and A) 111 wells located in the Melton Valley area of Oak Ridge National Laboratory (ORNL). One hundred and seven of those wells were used to monitor fluid movement and subsurface containment of the low level radioactive liquid waste/grout slurry that was injected into the Pumpkin Valley Shale Formation, underlying ORNL. Four wells were used as hydrofracture injection wells to emplace the waste in the shale formation. Although the practice of hydrofracturing was and is considered by many to pose no threat to human health or the environment, the practice was halted in 1982 after the Federal Underground Injection Control regulations were enacted by United States Environmental Protection Agency (USEPA) making it necessary to properly close the wells. The work is being performed for the United States Department of Energy Oak Ridge Operations (DOE ORO). The project team is using the philosophy of minimum waste generation and the principles of ALARA (As Low As Reasonably Achievable) as key project goals to minimize personnel and equipment exposure, waste generation, and project costs. Achievement of these goals was demonstrated by the introduction of several new pieces of custom designed well plugging and abandonment equipment that were tested and used effectively during field operations. Highlights of the work performed and the equipment used are presented

AUTOMATIC CLASSIFICATION OF VARIABLE STARS IN CATALOGS WITH MISSING DATA

International Nuclear Information System (INIS)

Pichara, Karim; Protopapas, Pavlos

2013-01-01

We present an automatic classification method for astronomical catalogs with missing data. We use Bayesian networks and a probabilistic graphical model that allows us to perform inference to predict missing values given observed data and dependency relationships between variables. To learn a Bayesian network from incomplete data, we use an iterative algorithm that utilizes sampling methods and expectation maximization to estimate the distributions and probabilistic dependencies of variables from data with missing values. To test our model, we use three catalogs with missing data (SAGE, Two Micron All Sky Survey, and UBVI) and one complete catalog (MACHO). We examine how classification accuracy changes when information from missing data catalogs is included, how our method compares to traditional missing data approaches, and at what computational cost. Integrating these catalogs with missing data, we find that classification of variable objects improves by a few percent and by 15% for quasar detection while keeping the computational cost the same

AUTOMATIC CLASSIFICATION OF VARIABLE STARS IN CATALOGS WITH MISSING DATA

Energy Technology Data Exchange (ETDEWEB)

Pichara, Karim [Computer Science Department, Pontificia Universidad Católica de Chile, Santiago (Chile); Protopapas, Pavlos [Institute for Applied Computational Science, Harvard University, Cambridge, MA (United States)

2013-11-10

We present an automatic classification method for astronomical catalogs with missing data. We use Bayesian networks and a probabilistic graphical model that allows us to perform inference to predict missing values given observed data and dependency relationships between variables. To learn a Bayesian network from incomplete data, we use an iterative algorithm that utilizes sampling methods and expectation maximization to estimate the distributions and probabilistic dependencies of variables from data with missing values. To test our model, we use three catalogs with missing data (SAGE, Two Micron All Sky Survey, and UBVI) and one complete catalog (MACHO). We examine how classification accuracy changes when information from missing data catalogs is included, how our method compares to traditional missing data approaches, and at what computational cost. Integrating these catalogs with missing data, we find that classification of variable objects improves by a few percent and by 15% for quasar detection while keeping the computational cost the same.

Missed Opportunities For Immunization In Children And Pregnant Women

Directory of Open Access Journals (Sweden)

Benjamin A I

1990-01-01

Full Text Available The role of immunization in reducing childhood mortality cannot be over-emphasised, yet many opportunities for immunization are missed when children and pregnant women visit a health facility. Reducing missed opportunities is the cheapest way to increase immunization coverage. The present study discusses the extent of the problem of missed opportunities for immunization in children and pregnant women and the factors contributing to the problem, in spatiality and community outreach clinics of Christian Medical College & Hospital, Ludhiana. Recommendations are made regarding ways and means of reducing missed opportunities.

Evaluation by nanoindentation of technological products manufactured by pulse injection molding process

Directory of Open Access Journals (Sweden)

Natova Margarita

2018-01-01

Full Text Available During conventional polymer injection molding, flow- and weld lines can arise at the molded parts caused by disturbed polymer melt flow when it crosses different parts of the equipment. Such processed plastic goods have discrete zones of inhomogeneities of very small dimensions. In order to stabilize the melt flow and to equalize dimensions of such defective products, an approach for pulse injection molding is applied during production of polymer packagings. Testing methods used for evaluation of macromechanical performance of processed polymer products are not readily applicable to estimate the changes in visual surface obtained during pulse injecting. To overcome this testing inconvenience the performance of processed packagings is evaluated by nanoindentation. Using this method, a quantitative assessment of the polymer properties is obtained from different parts of technological products.

Methods for Handling Missing Secondary Respondent Data

Science.gov (United States)

Young, Rebekah; Johnson, David

2013-01-01

Secondary respondent data are underutilized because researchers avoid using these data in the presence of substantial missing data. The authors reviewed, evaluated, and tested solutions to this problem. Five strategies of dealing with missing partner data were reviewed: (a) complete case analysis, (b) inverse probability weighting, (c) correction…

Reducing Competitive Cache Misses in Modern Processor Architectures

OpenAIRE

Prisagjanec, Milcho; Mitrevski, Pece

2017-01-01

The increasing number of threads inside the cores of a multicore processor, and competitive access to the shared cache memory, become the main reasons for an increased number of competitive cache misses and performance decline. Inevitably, the development of modern processor architectures leads to an increased number of cache misses. In this paper, we make an attempt to implement a technique for decreasing the number of competitive cache misses in the first level of cache memory. This tec...

Combustion and regulations. Impacts of new regulations on medium-power thermal equipment (boilers, engines, turbines, dryers and furnaces); Combustion et reglementation. Incidences des nouvelles reglementations sur les equipements thermiques de moyenne puissance (chaudieres, moteurs, turbines, secheurs et fours)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

This conference is composed of 20 papers on the influence of French and European new pollution regulations on medium size thermal equipment such as boilers, engines, turbines, dryers and furnaces. It is discussed what is going to change with new regulations, how they will apply to existing plants, what will be the impact on future equipment costs. The evolution of energy suppliers and equipment manufacturers facing these new regulations is also examined: fuel substitution, improvements in turbines and engines with water injection and special chambers, diesel engine control, lean mixtures and electronic control for gas engines... Means for reducing SOx, NOx and ash emission levels in boilers are also examined

Missed opportunities in crystallography.

Science.gov (United States)

Dauter, Zbigniew; Jaskolski, Mariusz

2014-09-01

Scrutinized from the perspective of time, the giants in the history of crystallography more than once missed a nearly obvious chance to make another great discovery, or went in the wrong direction. This review analyzes such missed opportunities focusing on macromolecular crystallographers (using Perutz, Pauling, Franklin as examples), although cases of particular historical (Kepler), methodological (Laue, Patterson) or structural (Pauling, Ramachandran) relevance are also described. Linus Pauling, in particular, is presented several times in different circumstances, as a man of vision, oversight, or even blindness. His example underscores the simple truth that also in science incessant creativity is inevitably connected with some probability of fault. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

Bayesian Sensitivity Analysis of Statistical Models with Missing Data.

Science.gov (United States)

Zhu, Hongtu; Ibrahim, Joseph G; Tang, Niansheng

2014-04-01

Methods for handling missing data depend strongly on the mechanism that generated the missing values, such as missing completely at random (MCAR) or missing at random (MAR), as well as other distributional and modeling assumptions at various stages. It is well known that the resulting estimates and tests may be sensitive to these assumptions as well as to outlying observations. In this paper, we introduce various perturbations to modeling assumptions and individual observations, and then develop a formal sensitivity analysis to assess these perturbations in the Bayesian analysis of statistical models with missing data. We develop a geometric framework, called the Bayesian perturbation manifold, to characterize the intrinsic structure of these perturbations. We propose several intrinsic influence measures to perform sensitivity analysis and quantify the effect of various perturbations to statistical models. We use the proposed sensitivity analysis procedure to systematically investigate the tenability of the non-ignorable missing at random (NMAR) assumption. Simulation studies are conducted to evaluate our methods, and a dataset is analyzed to illustrate the use of our diagnostic measures.

Mercury Control for Plants Firing Texas Lignite and Equipped with ESP-wet FGD

Energy Technology Data Exchange (ETDEWEB)

Katherine Dombrowski

2009-12-31

This report presents the results of a multi-year test program conducted as part of Cooperative Agreement DE-FC26-06NT42779, 'Mercury Control for Plants Firing Texas Lignite and Equipped with ESP-wet FGD.' The objective of this program was to determine the level of mercury removal achievable using sorbent injection for a plant firing Texas lignite fuel and equipped with an ESP and wet FGD. The project was primarily funded by the U.S. DOE National Energy Technology Laboratory. EPRI, NRG Texas, Luminant (formerly TXU), and AEP were project co-funders. URS Group was the prime contractor, and Apogee Scientific and ADA-ES were subcontractors. The host site for this program was NRG Texas Limestone Electric Generating Station (LMS) Units 1 and 2, located in Jewett, Texas. The plant fires a blend of Texas lignite and Powder River Basin (PRB) coal. Full-scale tests were conducted to evaluate the mercury removal performance of powdered sorbents injected into the flue gas upstream of the ESP (traditional configuration), upstream of the air preheater, and/or between electric fields within the ESP (Toxecon{trademark} II configuration). Phases I through III of the test program, conducted on Unit 1 in 2006-2007, consisted of three short-term parametric test phases followed by a 60-day continuous operation test. Selected mercury sorbents were injected to treat one quarter of the flue gas (e.g., approximately 225 MW equivalence) produced by Limestone Unit 1. Six sorbents and three injection configurations were evaluated and results were used to select the best combination of sorbent (Norit Americas DARCO Hg-LH at 2 lb/Macf) and injection location (upstream of the ESP) for a two-month performance evaluation. A mercury removal rate of 50-70% was targeted for the long-term test. During this continuous-injection test, mercury removal performance and variability were evaluated as the plant operated under normal conditions. Additional evaluations were made to determine any

Student versus Faculty Perceptions of Missing Class.

Science.gov (United States)

Sleigh, Merry J.; Ritzer, Darren R.; Casey, Michael B.

2002-01-01

Examines and compares student and faculty attitudes towards students missing classes and class attendance. Surveys undergraduate students (n=231) in lower and upper level psychology courses and psychology faculty. Reports that students found more reasons acceptable for missing classes and that the amount of in-class material on the examinations…

The Impact of the Nursing Practice Environment on Missed Nursing Care.

Science.gov (United States)

Hessels, Amanda J; Flynn, Linda; Cimiotti, Jeannie P; Cadmus, Edna; Gershon, Robyn R M

2015-12-01

Missed nursing care is an emerging problem negatively impacting patient outcomes. There are gaps in our knowledge of factors associated with missed nursing care. The aim of this study was to determine the relationship between the nursing practice environment and missed nursing care in acute care hospitals. This is a secondary analysis of cross sectional data from a survey of over 7.000 nurses from 70 hospitals on workplace and process of care. Ordinary least squares and multiple regression models were constructed to examine the relationship between the nursing practice environment and missed nursing care while controlling for characteristics of nurses and hospitals. Nurses missed delivering a significant amount of necessary patient care (10-27%). Inadequate staffing and inadequate resources were the practice environment factors most strongly associated with missed nursing care events. This multi-site study examined the risk and risk factors associated with missed nursing care. Improvements targeting modifiable risk factors may reduce the risk of missed nursing care.

Incidence and Correlates of Maternal Near Miss in Southeast Iran

Directory of Open Access Journals (Sweden)

Tayebeh Naderi

2015-01-01

Full Text Available This prospective study aimed to estimate the incidence and associated factors of severe maternal morbidity in southeast Iran. During a 9-month period in 2013, all women referring to eight hospitals for termination of pregnancy as well as women admitted during 42 days after the termination of pregnancy were enrolled into the study. Maternal near miss conditions were defined based on Say et al.’s recommendations. Five hundred and one cases of maternal near miss and 19,908 live births occurred in the study period, yielding a maternal near miss ratio of 25.2 per 1000 live births. This rate was 7.5 and 105 per 1000 in private and tertiary care settings, respectively. The rate of maternal death in near miss cases was 0.40% with a case:fatality ratio of 250 : 1. The most prevalent causes of near miss were severe preeclampsia (27.3%, ectopic pregnancy (18.4%, and abruptio placentae (16.2%. Higher age, higher education, and being primiparous were associated with a higher risk of near miss. Considering the high rate of maternal near miss in referral hospitals, maternal near miss surveillance system should be set up in these hospitals to identify cases of severe maternal morbidity as soon as possible.

Droid X The Missing Manual

CERN Document Server

Gralla, Preston

2011-01-01

Get the most from your Droid X right away with this entertaining Missing Manual. Veteran tech author Preston Gralla offers a guided tour of every feature, with lots of expert tips and tricks along the way. You'll learn how to use calling and texting features, take and share photos, enjoy streaming music and video, and much more. Packed with full-color illustrations, this engaging book covers everything from getting started to advanced features and troubleshooting. Unleash the power of Motorola's hot new device with Droid X: The Missing Manual. Get organized. Import your contacts and sync wit

A Review of Methods for Missing Data.

Science.gov (United States)

Pigott, Therese D.

2001-01-01

Reviews methods for handling missing data in a research study. Model-based methods, such as maximum likelihood using the EM algorithm and multiple imputation, hold more promise than ad hoc methods. Although model-based methods require more specialized computer programs and assumptions about the nature of missing data, these methods are appropriate…

SU-E-T-310: Targeting Safety Improvements Through Analysis of Near-Miss Error Detection Points in An Incident Learning Database

International Nuclear Information System (INIS)

Novak, A; Nyflot, M; Sponseller, P; Howard, J; Logan, W; Holland, L; Jordan, L; Carlson, J; Ermoian, R; Kane, G; Ford, E; Zeng, J

2014-01-01

Purpose: Radiation treatment planning involves a complex workflow that can make safety improvement efforts challenging. This study utilizes an incident reporting system to identify detection points of near-miss errors, in order to guide our departmental safety improvement efforts. Previous studies have examined where errors arise, but not where they are detected or their patterns. Methods: 1377 incidents were analyzed from a departmental nearmiss error reporting system from 3/2012–10/2013. All incidents were prospectively reviewed weekly by a multi-disciplinary team, and assigned a near-miss severity score ranging from 0–4 reflecting potential harm (no harm to critical). A 98-step consensus workflow was used to determine origination and detection points of near-miss errors, categorized into 7 major steps (patient assessment/orders, simulation, contouring/treatment planning, pre-treatment plan checks, therapist/on-treatment review, post-treatment checks, and equipment issues). Categories were compared using ANOVA. Results: In the 7-step workflow, 23% of near-miss errors were detected within the same step in the workflow, while an additional 37% were detected by the next step in the workflow, and 23% were detected two steps downstream. Errors detected further from origination were more severe (p<.001; Figure 1). The most common source of near-miss errors was treatment planning/contouring, with 476 near misses (35%). Of those 476, only 72(15%) were found before leaving treatment planning, 213(45%) were found at physics plan checks, and 191(40%) were caught at the therapist pre-treatment chart review or on portal imaging. Errors that passed through physics plan checks and were detected by therapists were more severe than other errors originating in contouring/treatment planning (1.81 vs 1.33, p<0.001). Conclusion: Errors caught by radiation treatment therapists tend to be more severe than errors caught earlier in the workflow, highlighting the importance of safety

Reduction of artefacts due to missing projections using OSEM

International Nuclear Information System (INIS)

Hutton, B.F.; Kyme, A.; Choong, K.

2002-01-01

Full text: It is well recognised that missing or corrupted projections can result in artefacts. This occasionally occurs due to errors in data transfer from acquisition memory to disk. A possible approach for reducing these artefacts was investigated, Using ordered subsets expectation maximization (OSEM) the iterative reconstruction proceeds by progressively including additional projections until a single iteration is complete. Clinically useful results can be obtained using a small subset size in a single iteration. Stopping prior to the complete iteration so as to avoid inclusion of missing or corrupted data should provide a 'partial' reconstruction with minimal artefacts. To test this hypothesis projections were selectively removed from a complete data set (2, 4, 8, 12 adjacent projections) and reconstructions were performed using both filtered back projection (FBP) and OSEM. To maintain a constant number of sub-iterations in OSEM an equal number of duplicate projections were substituted for the missing projections. Both 180 and 360 degrees reconstructions with missing data were compared with reconstruction for the complete data using sum of absolute differences. Results indicate that missing data causes artefacts for both FBP and OSEM however the severity of artefacts is significantly reduced using OSEM. The effect of missing data is generally greater for 180 degrees acquisition. OSEM is recommended for minimising reconstruction artefacts due to missing projections. Copyright (2002) The Australian and New Zealand Society of Nuclear Medicine Inc

[Establishment of model of traditional Chinese medicine injections post-marketing safety monitoring].

Science.gov (United States)

Guo, Xin-E; Zhao, Yu-Bin; Xie, Yan-Ming; Zhao, Li-Cai; Li, Yan-Feng; Hao, Zhe

2013-09-01

To establish a nurse based post-marketing safety surveillance model for traditional Chinese medicine injections (TCMIs). A TCMIs safety monitoring team and a research hospital team engaged in the research, monitoring processes, and quality control processes were established, in order to achieve comprehensive, timely, accurate and real-time access to research data, to eliminate errors in data collection. A triage system involving a study nurse, as the first point of contact, clinicians and clinical pharmacists was set up in a TCM hospital. Following the specified workflow involving labeling of TCM injections and using improved monitoring forms it was found that there were no missing reports at the ratio of error was zero. A research nurse as the first and main point of contact in post-marketing safety monitoring of TCM as part of a triage model, ensures that research data collected has the characteristics of authenticity, accuracy, timeliness, integrity, and eliminate errors during the process of data collection. Hospital based monitoring is a robust and operable process.

Wall-slip of highly filled powder injection molding compounds: Effect of flow channel geometry and roughness

Science.gov (United States)

Hausnerova, Berenika; Sanetrnik, Daniel; Paravanova, Gordana

2014-05-01

The paper deals with the rheological behavior of highly filled compounds proceeded via powder injection molding (PIM) and applied in many sectors of industry (automotive, medicine, electronic or military). Online rheometer equipped with slit dies varying in surface roughness and dimensions was applied to investigate the wall-slip as a rheological phenomenon, which can be considered as a parameter indicating the separation of compound components (polymer binder and metallic powder) during high shear rates when injection molded.

Maternal near-miss in a rural hospital in Sudan

Directory of Open Access Journals (Sweden)

Adam Gamal K

2011-06-01

Full Text Available Abstract Background Investigation of maternal near-miss is a useful complement to the investigation of maternal mortality with the aim of meeting the United Nations' fifth Millennium Development Goal. The present study was conducted to investigate the frequency of near-miss events, to calculate the mortality index for each event and to compare the socio-demographic and obstetrical data (age, parity, gestational age, education and antenatal care of the near-miss cases with maternal deaths. Methods Near-miss cases and events (hemorrhage, infection, hypertensive disorders, anemia and dystocia, maternal deaths and their causes were retrospectively reviewed and the mortality index for each event was calculated in Kassala Hospital, eastern Sudan over a 2-year period, from January 2008 to December 2010. Disease-specific criteria were applied for these events. Results There were 9578 deliveries, 205 near-miss cases, 228 near-miss events and 40 maternal deaths. Maternal near-miss and maternal mortality ratio were 22.1/1000 live births and 432/100 000 live births, respectively. Hemorrhage accounted for the most common event (40.8%, followed by infection (21.5%, hypertensive disorders (18.0%, anemia (11.8% and dystocia (7.9%. The mortality index were 22.2%, 10.0%, 10.0%, 8.8% and 2.4% for infection, dystocia, anemia, hemorrhage and hypertensive disorders, respectively. Conclusion There is a high frequency of maternal morbidity and mortality at the level of this facility. Therefore maternal health policy needs to be concerned not only with averting the loss of life, but also with preventing or ameliorating maternal-near miss events (hemorrhage, infections, hypertension and anemia at all care levels including primary level.

Missing transverse momentum in ATLAS: current and future performance

CERN Document Server

Schramm, S; The ATLAS collaboration

2014-01-01

During the Run-I data taking period, ATLAS has developed and refined several approaches for measuring missing transverse momentum in proton-proton collisions. Standard calorimeter-based $\\mathrm{E}_\\mathrm{T}^\\mathrm{miss}$ reconstruction techniques have been improved to obtain new levels of precision, while new track-based $\\mathrm{p}_\\mathrm{T}^\\mathrm{miss}$ methods provide for a way to have a second independent measurement of the momentum lost due to particles which do not leave tracks in the inner detectors. While both procedures are individually useful, preliminary studies have shown that combining information from both techniques leads to an improved understanding of missing transverse momentum. Data taking conditions during Run-I varied extensively, especially with respect to the amount of pileup activity present in each event, which provides unique challenges to calorimeter-based $\\mathrm{E}_\\mathrm{T}^\\mathrm{miss}$. Multiple solutions have been demonstrated, including methods which exploit both cal...

ALGORITHMS FOR THE PROGRAMMING OF FOOTWEAR SOLES MOULDS ON WORKING POSTS OF INJECTION MACHINES

Directory of Open Access Journals (Sweden)

LUCA Cornelia

2014-05-01

Full Text Available The moulds stock necessary for realization in rhythmically conditions, a certain volume of footwear soles depends on some criterions such as: the range of soles for footwear volume daily realized, the sizes structure of those soles for footwear and, respectively, the sizes tally, the technological cycle for an used mould depending on the equipment efficiency, the provide necessity of spare moulds, the using and fixing conditions etc. From the efficiency point of view, the equipments may have two working posts, or more working posts (always, an even number, as 6, 12, 24, 40 posts. Footwear soles manufacturing takes into account the percentage distribution of the size numbers of the size series. When o portative assembly is used for the manufacturing of the footwear soles using the injection with “n” working posts, it is very important an optimum distribution of the working posts. The disadvantages of these equipments are the situations of the no equilibrium programming of the moulds, so that, in one time, some working posts spread out of the work. The paper presents some practical and theoretical solutions for moulds stock programming in portative assembly for footwear soles injection, so that an optimum equilibrium degree of the working posts will obtain

A nonparametric multiple imputation approach for missing categorical data

Directory of Open Access Journals (Sweden)

Muhan Zhou

2017-06-01

Full Text Available Abstract Background Incomplete categorical variables with more than two categories are common in public health data. However, most of the existing missing-data methods do not use the information from nonresponse (missingness probabilities. Methods We propose a nearest-neighbour multiple imputation approach to impute a missing at random categorical outcome and to estimate the proportion of each category. The donor set for imputation is formed by measuring distances between each missing value with other non-missing values. The distance function is calculated based on a predictive score, which is derived from two working models: one fits a multinomial logistic regression for predicting the missing categorical outcome (the outcome model and the other fits a logistic regression for predicting missingness probabilities (the missingness model. A weighting scheme is used to accommodate contributions from two working models when generating the predictive score. A missing value is imputed by randomly selecting one of the non-missing values with the smallest distances. We conduct a simulation to evaluate the performance of the proposed method and compare it with several alternative methods. A real-data application is also presented. Results The simulation study suggests that the proposed method performs well when missingness probabilities are not extreme under some misspecifications of the working models. However, the calibration estimator, which is also based on two working models, can be highly unstable when missingness probabilities for some observations are extremely high. In this scenario, the proposed method produces more stable and better estimates. In addition, proper weights need to be chosen to balance the contributions from the two working models and achieve optimal results for the proposed method. Conclusions We conclude that the proposed multiple imputation method is a reasonable approach to dealing with missing categorical outcome data with

Missing and Spurious Level Corrections for Nuclear Resonances

International Nuclear Information System (INIS)

Mitchell, G E; Agvaanluvsan, U; Pato, M P; Shriner, J F

2005-01-01

Neutron and proton resonances provide detailed level density information. However, due to experimental limitations, some levels are missed and some are assigned incorrect quantum numbers. The standard method to correct for missing levels uses the experimental widths and the Porter-Thomas distribution. Analysis of the spacing distribution provides an independent determination of the fraction of missing levels. We have derived a general expression for such an imperfect spacing distribution using the maximum entropy principle and applied it to a variety of nuclear resonance data. The problem of spurious levels has not been extensively addressed

CDC Vital Signs–HIV and Injection Drug Use

Centers for Disease Control (CDC) Podcasts

2016-11-29

This podcast is based on the December 2016 CDC Vital Signs report. Sharing needles, syringes, and other injection equipment puts you at risk for getting HIV and other infections, including hepatitis. Learn how to reduce your HIV risk.  Created: 11/29/2016 by National Center for HIV/AIDS, Viral Hepatitis, Sexual Transmitted Diseases and Tuberculosis Prevention (NCHHSTP).   Date Released: 11/29/2016.

New wave form surveillance and diagnostics for the LEP injection kickers

CERN Document Server

Carlier, E; Verhagen, H

1995-01-01

The introduction of the Bunch Train Scheme in LEP requires a more precise and automatic supervision of the stability of the LEP injection kickers in timing and amplitude. Comprehensive and user-friendly diagnostic tools are required for in-depth investigation of equipment behaviour. A new system is currently being prepared using to a large extent commercial data acquisition hardware and hardware independent software products.

Recurrent Neural Networks for Multivariate Time Series with Missing Values.

Science.gov (United States)

Che, Zhengping; Purushotham, Sanjay; Cho, Kyunghyun; Sontag, David; Liu, Yan

2018-04-17

Multivariate time series data in practical applications, such as health care, geoscience, and biology, are characterized by a variety of missing values. In time series prediction and other related tasks, it has been noted that missing values and their missing patterns are often correlated with the target labels, a.k.a., informative missingness. There is very limited work on exploiting the missing patterns for effective imputation and improving prediction performance. In this paper, we develop novel deep learning models, namely GRU-D, as one of the early attempts. GRU-D is based on Gated Recurrent Unit (GRU), a state-of-the-art recurrent neural network. It takes two representations of missing patterns, i.e., masking and time interval, and effectively incorporates them into a deep model architecture so that it not only captures the long-term temporal dependencies in time series, but also utilizes the missing patterns to achieve better prediction results. Experiments of time series classification tasks on real-world clinical datasets (MIMIC-III, PhysioNet) and synthetic datasets demonstrate that our models achieve state-of-the-art performance and provide useful insights for better understanding and utilization of missing values in time series analysis.

Association of the Nurse Work Environment, Collective Efficacy, and Missed Care.

Science.gov (United States)

Smith, Jessica G; Morin, Karen H; Wallace, Leigh E; Lake, Eileen T

2018-06-01

Missed nursing care is a significant threat to quality patient care. Promoting collective efficacy within nurse work environments could decrease missed care. The purpose was to understand how missed care is associated with nurse work environments and collective efficacy of hospital staff nurses. A cross-sectional, convenience sample was obtained through online surveys from registered nurses working at five southwestern U.S. hospitals. Descriptive, correlational, regression, and path analyses were conducted ( N = 233). The percentage of nurses who reported that at least one care activity was missed frequently or always was 94%. Mouth care (36.0% of nurses) and ambulation (35.3%) were missed frequently or always. Nurse work environments and collective efficacy were moderately, positively correlated. Nurse work environments and collective efficacy were associated with less missed care (χ 2 = 10.714, p = .0054). Fostering collective efficacy in the nurse work environment could reduce missed care and improve patient outcomes.

Imputation of missing data in time series for air pollutants

Science.gov (United States)

Junger, W. L.; Ponce de Leon, A.

2015-02-01

Missing data are major concerns in epidemiological studies of the health effects of environmental air pollutants. This article presents an imputation-based method that is suitable for multivariate time series data, which uses the EM algorithm under the assumption of normal distribution. Different approaches are considered for filtering the temporal component. A simulation study was performed to assess validity and performance of proposed method in comparison with some frequently used methods. Simulations showed that when the amount of missing data was as low as 5%, the complete data analysis yielded satisfactory results regardless of the generating mechanism of the missing data, whereas the validity began to degenerate when the proportion of missing values exceeded 10%. The proposed imputation method exhibited good accuracy and precision in different settings with respect to the patterns of missing observations. Most of the imputations obtained valid results, even under missing not at random. The methods proposed in this study are implemented as a package called mtsdi for the statistical software system R.

Motorola Xoom The Missing Manual

CERN Document Server

Gralla, Preston

2011-01-01

Motorola Xoom is the first tablet to rival the iPad, and no wonder with all of the great features packed into this device. But learning how to use everything can be tricky-and Xoom doesn't come with a printed guide. That's where this Missing Manual comes in. Gadget expert Preston Gralla helps you master your Xoom with step-by-step instructions and clear explanations. As with all Missing Manuals, this book offers refreshing, jargon-free prose and informative illustrations. Use your Xoom as an e-book reader, music player, camcorder, and phoneKeep in touch with email, video and text chat, and so

Missing data imputation: focusing on single imputation.

Science.gov (United States)

Zhang, Zhongheng

2016-01-01

Complete case analysis is widely used for handling missing data, and it is the default method in many statistical packages. However, this method may introduce bias and some useful information will be omitted from analysis. Therefore, many imputation methods are developed to make gap end. The present article focuses on single imputation. Imputations with mean, median and mode are simple but, like complete case analysis, can introduce bias on mean and deviation. Furthermore, they ignore relationship with other variables. Regression imputation can preserve relationship between missing values and other variables. There are many sophisticated methods exist to handle missing values in longitudinal data. This article focuses primarily on how to implement R code to perform single imputation, while avoiding complex mathematical calculations.

A new concept of auxiliary fuel injection through tuyeres in blast furnaces developed by numerical simulations

Directory of Open Access Journals (Sweden)

Bruno Orlando de Almeida Santos

2014-04-01

Full Text Available The Injection of powdered materials in blast furnaces is a great option for reducing costs, increasing productivity and satisfy the environmental norms. Thus, this paper presents a study on the use of a flame stabilization system with rotation, designed to promote greater coal injection in the combustion zone, reducing losses and increasing the efficiency of the equipment. A physical model was used to evaluate scattering of pulverized fuel and is compared with numerical results in the same scale. In the second step, a combustion model was added to the numerical simulation, using dimensions of a real blast furnace. Fields like temperature, velocity and behavior of chemical reactions were analyzed. The results showed that double lances promote better particle injection when compared with simple lance for reduced material injection. The new injection system proposed, with swirl numbers of 0.12 and 0.24, promoted a better injection of both reduced material and temperature in the raceway zone. The swirl 0.24 showed superior performance when compared to other injection systems.

Time Series Forecasting with Missing Values

Directory of Open Access Journals (Sweden)

Shin-Fu Wu

2015-11-01

Full Text Available Time series prediction has become more popular in various kinds of applications such as weather prediction, control engineering, financial analysis, industrial monitoring, etc. To deal with real-world problems, we are often faced with missing values in the data due to sensor malfunctions or human errors. Traditionally, the missing values are simply omitted or replaced by means of imputation methods. However, omitting those missing values may cause temporal discontinuity. Imputation methods, on the other hand, may alter the original time series. In this study, we propose a novel forecasting method based on least squares support vector machine (LSSVM. We employ the input patterns with the temporal information which is defined as local time index (LTI. Time series data as well as local time indexes are fed to LSSVM for doing forecasting without imputation. We compare the forecasting performance of our method with other imputation methods. Experimental results show that the proposed method is promising and is worth further investigations.

Missing School Matters

Science.gov (United States)

Balfanz, Robert

2016-01-01

Results of a survey conducted by the Office for Civil Rights show that 6 million public school students (13%) are not attending school regularly. Chronic absenteeism--defined as missing more than 10% of school for any reason--has been negatively linked to many key academic outcomes. Evidence shows that students who exit chronic absentee status can…

Miss World going deshi

DEFF Research Database (Denmark)

Wildermuth, Norbert

  In November 1996 the South Indian metropolis Bangalore hosted the annual Miss World show. The live event and its televisualisation became a prominent symbol for the India's economic liberalisation and for the immanent globalizing dimensions of this development. As such, the highly prestigious......, the pageant's contestation, which gave rise to a series of vehement protests and a broad public debate about the country's cultural alienation, marked a crucial point in time and trend towards the (re)localisation of the Indian television landscape. In consequence, the 1996 Miss World show and its...... their vision and politics of gender, nation and modernity on the larger Indian public, over the last two decades. Engaging the Indian population increasingly by way of the new electronic, c&s distributed media, competing discourses of gender and sexuality were projected, basically as a necessary, effective...

A problem-solving approach to effective insulin injection for patients at either end of the body mass index.

Science.gov (United States)

Juip, Micki; Fitzner, Karen

2012-06-01

People with diabetes require skills and knowledge to adhere to medication regimens and self-manage this complex disease. Effective self-management is contingent upon effective problem solving and decision making. Gaps existed regarding useful approaches to problem solving by individuals with very low and very high body mass index (BMI) who self-administer insulin injections. This article addresses those gaps by presenting findings from a patient survey, a symposium on the topic of problem solving, and recent interviews with diabetes educators to facilitate problem-solving approaches for people with diabetes with high and low BMI who inject insulin and/or other medications. In practice, problem solving involves problem identification, definition, and specification; goal and barrier identification are a prelude to generating a set of potential strategies for problem resolution and applying these strategies to implement a solution. Teaching techniques, such as site rotation and ensuring that people with diabetes use the appropriate equipment, increase confidence with medication adherence. Medication taking is more effective when people with diabetes are equipped with the knowledge, skills, and problem-solving behaviors to effectively self-manage their injections.

Development of compressor equipment for technologies of hydrocarbons extraction using nitrogen

Directory of Open Access Journals (Sweden)

G. V. Kirik

2016-12-01

Full Text Available This article provides an overview of the results of research and development work aimed at the development and implementation of technologies compressor using nitrogen to extract hydrocarbons. Nitrogen as the most affordable gas, is used as a neutral environment while performing a variety of works: gas injection into wells to stabilize the reservoir pressure in the development of oil and gas fields, gas condensate production, as well as the performance of repair work and testing of pipelines. A significant role is played by the use of nitrogen for extinguishing fires in coal mines. The implementation of these technologies requires the design and development of domestic production of the compressor equipment. The article gives some examples of developments of compressor stations based on screw and piston compressors, which meet modern requirements of efficiency, reliability, ergonomics and ecology, equipped with systems of control and regulation on the basis of controllers. The description and characteristics of the compressor equipment, and some results of the implementation compressors and technologies using nitrogen as a neutral environment.

Missed nursing care and its relationship with confidence in delegation among hospital nurses.

Science.gov (United States)

Saqer, Tahani J; AbuAlRub, Raeda F

2018-04-06

To (i) identify the types and reasons for missed nursing care among Jordanian hospital nurses; (ii) identify predictors of missed nursing care based on study variables; and (iii) examine the relationship between nurses' confidence in delegation and missed nursing care. Missed nursing care is a global concern for nurses and nurse administrators. Investigating the relation between the confidence in delegation and missed nursing care might help in designing strategies that enable nurses to minimise missed care and enhance quality of services. A correlational research design was used for this study. A convenience sample of 362 hospital nurses completed the missed nursing care survey, and confidence and intent to delegate scale. The results of the study revealed that ambulating and feeding patients on time, doing mouth care and attending interdisciplinary care conferences were the most frequent types of missed care. The mean score for missed nursing care was (2.78) on a scale from 1-5. The most prevalent reasons for missed care were "labour resources, followed by material resources, and then communication". Around 45% of the variation in the perceived level of "missed nursing care" was explained by background variables and perceived reasons for missed nursing. However, the relationship between confidence in delegation and missed care was insignificant. The results of this study add to the body of international literature on most prevalent types and reasons for missed nursing care in a different cultural context. Highlighting most prevalent reasons for missed nursing care could help nurse administrators in designing responsive strategies to eliminate or reduces such reasons. © 2018 John Wiley & Sons Ltd.

MISSE PEACE Polymers Atomic Oxygen Erosion Results

Science.gov (United States)

deGroh, Kim, K.; Banks, Bruce A.; McCarthy, Catherine E.; Rucker, Rochelle N.; Roberts, Lily M.; Berger, Lauren A.

2006-01-01

Forty-one different polymer samples, collectively called the Polymer Erosion and Contamination Experiment (PEACE) Polymers, have been exposed to the low Earth orbit (LEO) environment on the exterior of the International Space Station (ISS) for nearly 4 years as part of Materials International Space Station Experiment 2 (MISSE 2). The objective of the PEACE Polymers experiment was to determine the atomic oxygen erosion yield of a wide variety of polymeric materials after long term exposure to the space environment. The polymers range from those commonly used for spacecraft applications, such as Teflon (DuPont) FEP, to more recently developed polymers, such as high temperature polyimide PMR (polymerization of monomer reactants). Additional polymers were included to explore erosion yield dependence upon chemical composition. The MISSE PEACE Polymers experiment was flown in MISSE Passive Experiment Carrier 2 (PEC 2), tray 1, on the exterior of the ISS Quest Airlock and was exposed to atomic oxygen along with solar and charged particle radiation. MISSE 2 was successfully retrieved during a space walk on July 30, 2005, during Discovery s STS-114 Return to Flight mission. Details on the specific polymers flown, flight sample fabrication, pre-flight and post-flight characterization techniques, and atomic oxygen fluence calculations are discussed along with a summary of the atomic oxygen erosion yield results. The MISSE 2 PEACE Polymers experiment is unique because it has the widest variety of polymers flown in LEO for a long duration and provides extremely valuable erosion yield data for spacecraft design purposes.

Missed retinal breaks in rhegmatogenous retinal detachment

Directory of Open Access Journals (Sweden)

Brijesh Takkar

2016-12-01

Full Text Available AIM: To evaluate the causes and associations of missed retinal breaks (MRBs and posterior vitreous detachment (PVD in patients with rhegmatogenous retinal detachment (RRD. METHODS: Case sheets of patients undergoing vitreo retinal surgery for RRD at a tertiary eye care centre were evaluated retrospectively. Out of the 378 records screened, 253 were included for analysis of MRBs and 191 patients were included for analysis of PVD, depending on the inclusion criteria. Features of RRD and retinal breaks noted on examination were compared to the status of MRBs and PVD detected during surgery for possible associations. RESULTS: Overall, 27% patients had MRBs. Retinal holes were commonly missed in patients with lattice degeneration while missed retinal tears were associated with presence of complete PVD. Patients operated for cataract surgery were significantly associated with MRBs (P=0.033 with the odds of missing a retinal break being 1.91 as compared to patients with natural lens. Advanced proliferative vitreo retinopathy (PVR and retinal bullae were the most common reasons for missing a retinal break during examination. PVD was present in 52% of the cases and was wrongly assessed in 16%. Retinal bullae, pseudophakia/aphakia, myopia, and horse shoe retinal tears were strongly associated with presence of PVD. Traumatic RRDs were rarely associated with PVD. CONCLUSION: Pseudophakic patients, and patients with retinal bullae or advanced PVR should be carefully screened for MRBs. Though Weiss ring is a good indicator of PVD, it may still be over diagnosed in some cases. PVD is associated with retinal bullae and pseudophakia, and inversely with traumatic RRD.

Inroads into Equestrian Safety: Rider-Reported Factors Contributing to Horse-Related Accidents and Near Misses on Australian Roads

Science.gov (United States)

Thompson, Kirrilly; Matthews, Chelsea

2015-01-01

Simple Summary Riding horses on roads can be dangerous, but little is known about accidents and near misses. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52%) reported having experienced at least one accident or near miss in the 12 months prior to the survey, mostly attributed to speed. Whilst our findings confirmed factors identified overseas, we also identified issues around road rules, hand signals and road rage. This paper suggests strategies for improving the safety of horses, riders and other road users. Abstract Horse riding and horse-related interactions are inherently dangerous. When they occur on public roads, the risk profile of equestrian activities is complicated by interactions with other road users. Research has identified speed, proximity, visibility, conspicuity and mutual misunderstanding as factors contributing to accidents and near misses. However, little is known about their significance or incidence in Australia. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52%) reported having experienced at least one accident or near miss in the 12 months prior to the survey. Whilst our findings confirm the factors identified overseas, we also identified issues around rider misunderstanding of road rules and driver misunderstanding of rider hand signals. Of particular concern, we also found reports of potentially dangerous rider-directed road rage. We identify several areas for potential safety intervention including (1) identifying equestrians as vulnerable road users and horses as sentient decision-making vehicles; (2) harmonising laws regarding passing horses; (3) mandating personal protective equipment; (4) improving road signage; (5) comprehensive data collection; (6) developing mutual understanding amongst road-users; (7) safer road design and alternative riding spaces; and (8) increasing investment

Hepatitis C antibody prevalence among Mexico City prisoners injecting legal and illegal substances.

Science.gov (United States)

Silverman-Retana, Omar; Serván-Mori, Edson; McCoy, Sandra I; Larney, Sarah; Bautista-Arredondo, Sergio

2017-12-01

Hepatitis C virus (HCV) infection is highly prevalent among prisoners and this prevalence estimates reach 64% among prisoners who inject illicit drugs. Prisons are important sites for HCV transmission in the absence of access to sterile injecting equipment; hence, it can be transmitted between prisoners who share contaminated needles and syringes. We aimed to estimate the prevalence of risk factors for anti-HCV prevalence, with particular interest on injecting behavior, and to assess correlates of anti-HCV positivity among Mexico City prisoners. Cross-sectional study based on information -collected in three male and two female prisons in Mexico City during 2010-2011- about sexually transmitted infections, socio-demographics, criminal history, substance use, vitamin injection, tattooing, among others (n=3,910). Weighted multivariable adjusted logistic regression models were estimated to assess the overall and differential odds for anti-HCV due to injecting behavior. Overall prevalence of anti-HCV was 3.3%. This figure rose to 43.1% among prisoners with a history of illicit drug injection. Prisoners with history of vitamin injection showed a similar prevalence of anti-HCV (43.8%). After stratifying by substance injected, the adjusted odds ratio was 9.8 (95% CI: 4.0, 23.8) for illicit drug injection and 11.9 (95% CI: 5.8, 23.8) for illicit drug and vitamin injection. Based on data from the most populous prisons in Mexico City, this study showed that anti-HCV is highly prevalent among prisoners with history of injecting behavior. In this sense, injecting behavior per-se, independent of the substance used, is associated with increased odds of anti-HCV positivity. Copyright © 2017 Elsevier B.V. All rights reserved.

Miss Julie: A Psychoanalytic Study

Directory of Open Access Journals (Sweden)

Sonali Jain

2015-10-01

Full Text Available Sigmund Freud theorized that ‘the hero of the tragedy must suffer…to bear the burden of tragic guilt…(that lay in rebellion against some divine or human authority.’ August Strindberg, the Swedish poet, playwright, author and visual artist, like Shakespeare before him, portrayed insanity as the ultimate of tragic conflict. In this paper I seek to explore and reiterate the dynamics of human relationships that are as relevant today as they were in Strindberg’s time. I propose to examine Strindberg’s Miss Julie, a play set in nineteenth century Sweden, through a psychoanalytic lens. The play deals with bold themes of class and sexual identity politics. Notwithstanding the progress made in breaking down gender barriers, the inequalities inherent in a patriarchal system persist in modern society. Miss Julie highlights these imbalances. My analysis of the play deals with issues of culture and psyche, and draws on Freud, Melanie Klein, Lacan, Luce Irigaray and other contemporary feminists. Miss Julie is a discourse on hysteria, which is still pivotal to psychoanalysis. Prominent philosophers like Hegel and the psychoanalyst Jacques Lacan have written about the dialectic of the master and the slave – a relationship that is characterized by dependence, demand and cruelty. The history of human civilization shows beyond any doubt that there is an intimate connection between cruelty and the sexual instinct. An analysis of the text is carried out using the sado-masochistic dynamic as well the slave-master discourse. I argue that Miss Julie subverts the slave-master relationship. The struggle for dominance and power is closely linked with the theme of sexuality in the unconscious. To quote the English actor and director Alan Rickman, ‘Watching or working on the plays of Strindberg is like seeing the skin, flesh and bones of life separated from each other. Challenging and timeless.’

Sample-Based Extreme Learning Machine with Missing Data

Directory of Open Access Journals (Sweden)

Hang Gao

2015-01-01

Full Text Available Extreme learning machine (ELM has been extensively studied in machine learning community during the last few decades due to its high efficiency and the unification of classification, regression, and so forth. Though bearing such merits, existing ELM algorithms cannot efficiently handle the issue of missing data, which is relatively common in practical applications. The problem of missing data is commonly handled by imputation (i.e., replacing missing values with substituted values according to available information. However, imputation methods are not always effective. In this paper, we propose a sample-based learning framework to address this issue. Based on this framework, we develop two sample-based ELM algorithms for classification and regression, respectively. Comprehensive experiments have been conducted in synthetic data sets, UCI benchmark data sets, and a real world fingerprint image data set. As indicated, without introducing extra computational complexity, the proposed algorithms do more accurate and stable learning than other state-of-the-art ones, especially in the case of higher missing ratio.

Safe shutdown analysis for submerged equipment inside containment

International Nuclear Information System (INIS)

Song, Dong Soo; Lee, Seung Chan; Yoon, Duk Joo; Ha, Sang Jun

2017-01-01

The purpose of the paper is to analyze internal flooding effects on the submerged safety-related components inside containment building. Safe shutdown analysis has been performed based on the criteria, assumptions and guideline provided in ANSI/ANS-56.11-1988 and ANSI/ANS-58.11-1988. Flooding can be postulated from a failure of several systems located inside the containment. Loss of coolant accident (LOCA), Feed water line break (FWLB), and other pipe breaks/cracks are assumed. The worst case flooding scenario is a large break LOCA. The maximum flood level for a large break LOCA is calculated based on the combined inventory of the reactor coolant system, the three accumulators, the boron injection tank (BIT), the chemical additive tank (CAT), and the refueling water storage tank (RWST) flooding the containment. The maximum flood level that could occur from all of the water which is available in containment is 2.3 m from the base elevation. A detailed flooding analysis for the components has been performed to demonstrate that internal flooding resulting from a postulated initiating event does not cause the loss of equipment required to achieve and maintain safe shutdown of the plant, emergency core cooling capability, or equipment whose failure could result in unacceptable offsite radiological consequences. The flood height can be calculated as h = (dh/dt) x (t-t 0 ) + h 0 , where h = time dependent flood height and subscript 0 means the initial value and height slope dh/dt. In summary, the submerged components inside containment are acceptable because they complete the mission of safety injection (SI) prior to submeregency or have no safe shutdown function including containment isolation during an accident. (author)

Retrofit acid gas emission control for municipal waste incineration application of dry sorbent injection

International Nuclear Information System (INIS)

Zmuda, J.T.; Smith, P.V.

1991-01-01

Dry sorbent injection (DSI) has been successfully demonstrated on coal fired boiler applications as a means of reducing sulfur dioxide emissions. More recently, the dry sorbent injection process was applied to an existing municipal waste incinerator to provide acid gas emission controls. The results obtained from the successful demonstration of the sorbent injection system on an existing municipal incinerator are presented. Removal efficiencies of compounds such as HCl, SO 2 , SO 3 , mercury, and others by the use of sorbent injection are shown. Effects of the DSI system on downstream equipment, such as electrostatic precipitators, fabric filters, ash handling systems, and waste management is included. The impacts of the DSI system on the furnace is also discussed. In this paper a discussion of dry sorbent injection as a means of reducing acid gas and other emissions from existing municipal waste incinerators which may be affected by the regulations is presented. An application case study will outline typical exhaust conditions, expected pollution reductions, capital and operating costs, and type of available sorbents and their costs

Principal Component Analysis of Process Datasets with Missing Values

Directory of Open Access Journals (Sweden)

Kristen A. Severson

2017-07-01

Full Text Available Datasets with missing values arising from causes such as sensor failure, inconsistent sampling rates, and merging data from different systems are common in the process industry. Methods for handling missing data typically operate during data pre-processing, but can also occur during model building. This article considers missing data within the context of principal component analysis (PCA, which is a method originally developed for complete data that has widespread industrial application in multivariate statistical process control. Due to the prevalence of missing data and the success of PCA for handling complete data, several PCA algorithms that can act on incomplete data have been proposed. Here, algorithms for applying PCA to datasets with missing values are reviewed. A case study is presented to demonstrate the performance of the algorithms and suggestions are made with respect to choosing which algorithm is most appropriate for particular settings. An alternating algorithm based on the singular value decomposition achieved the best results in the majority of test cases involving process datasets.

The Missing Entrepreneurs 2014

DEFF Research Database (Denmark)

Halabisky, David; Potter, Jonathan; Thompson, Stuart

OECD's LEED Programme and the European Commission's DG on Employment, Social Affairs and Inclusion recently published the second book as part of their programme of work on inclusive entrepreneurship. The Missing Entrepreneurs 2014 examines how public policies at national and local levels can...

9 CFR 2.128 - Inspection for missing animals.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Inspection for missing animals. 2.128 Section 2.128 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.128 Inspection for missing animals. Each dealer...

VIGAN: Missing View Imputation with Generative Adversarial Networks.

Science.gov (United States)

Shang, Chao; Palmer, Aaron; Sun, Jiangwen; Chen, Ko-Shin; Lu, Jin; Bi, Jinbo

2017-01-01

In an era when big data are becoming the norm, there is less concern with the quantity but more with the quality and completeness of the data. In many disciplines, data are collected from heterogeneous sources, resulting in multi-view or multi-modal datasets. The missing data problem has been challenging to address in multi-view data analysis. Especially, when certain samples miss an entire view of data, it creates the missing view problem. Classic multiple imputations or matrix completion methods are hardly effective here when no information can be based on in the specific view to impute data for such samples. The commonly-used simple method of removing samples with a missing view can dramatically reduce sample size, thus diminishing the statistical power of a subsequent analysis. In this paper, we propose a novel approach for view imputation via generative adversarial networks (GANs), which we name by VIGAN. This approach first treats each view as a separate domain and identifies domain-to-domain mappings via a GAN using randomly-sampled data from each view, and then employs a multi-modal denoising autoencoder (DAE) to reconstruct the missing view from the GAN outputs based on paired data across the views. Then, by optimizing the GAN and DAE jointly, our model enables the knowledge integration for domain mappings and view correspondences to effectively recover the missing view. Empirical results on benchmark datasets validate the VIGAN approach by comparing against the state of the art. The evaluation of VIGAN in a genetic study of substance use disorders further proves the effectiveness and usability of this approach in life science.

Ultrasonographic findings of hydatidiform mole and missed abortion

International Nuclear Information System (INIS)

Yun, Kwang Myeong; Lee, Yeong Hwan; Chung, Hye Kyeong; Chung, Duck Soo; Kim, Ok Dong

1990-01-01

To establish the sonographic characteristics of the hydatidiform mole and the missed abortion with placental degeneration, we have retrospectively analyzed 12 cases of complete mole, 10 cases of partial mole, and 10 cases of missed abortion with placental hydropic degeneration, collected at Taegu Catholic General Hospital, from January 1986 to December 1989. The results were as follows : 1. Of 12 cases of complete mole, all demonstrated diffuse intrauterine vesicular pattern of internal echo without a gestational sac. Two cases were recurred after D and E. 2. The partial mole was characterized by focal (70%) or diffuse (20%) distribution of hydatidiform placental change and a gestational sac (100%) with or without a macerated fetus. But the striking hydatidiform placental change was not present in one cases of partial mole. 3. The uterus was larger for dates in 9 cases (90%) of complete mole, but smaller for dates in 7 cases (70%) of partial mole. 4. The missed abortion with placental hydropic degeneration was indistinguished from a partial mole due to their similar sonographic appearance : focal or diffuse cystic change of a placenta, a distorted gestational sac with or without a fetus, and a smaller uterus for dates. On conclusion, the complete mole could be easily distinguished from a partial mole or a missed abortion by sonography : a gestational sac or an area of noncystic placenta was not identified in a complete mole. The partial mole was indistinguished from a missed abortion, but if there is the suspicion of trophoblastic proliferation, such as a convex placental surface or a larger uterus for dates, then the diagnosis is probably a partial mole rather than a missed abortion

Critical incidents and near misses during anesthesia: A prospective audit

Directory of Open Access Journals (Sweden)

Pamela Onorame Agbamu

2017-01-01

Full Text Available Background: A critical incident is any preventable mishap associated with the administration of anesthesia and which leads to or could have led to an undesirable patients' outcome. Patients' safety can be improved by learning from reported critical incidents and near misses. Materials and Methods: All perioperative critical incidents (excluding obstetrics occurring over 5 months were voluntarily documented in a pro forma. Age of patient, urgency of surgery, grade of anesthetist, and patients' outcome was noted. Results: Seventy-three critical incidents were recorded in 42 patients (incidence 6.1% of 1188 procedures with complete recovery in 88.1% (n = 37 and mortality in 11.9% (n = 5. The highest incidents occurred during elective procedures (71.4%, which were all supervised by consultants, and in patients aged 0–10 years (40.1%. Critical incident categories documented were cardiovascular (41.1%, respiratory (23.25%, vascular access (15.1%, airway/intubation (6.85%, equipment errors (6.85%, difficult/failed regional technique (4.11%, and others (2.74%. The monitors available were: pulse oximetry (100%, precordial stethoscope (90.5%, sphygmomanometer (90.5%, capnography (54.8%, electrocardiogram (31%, and temperature (14.3%. The most probable cause of critical incident was patient factor (38.7% followed by human error (22.5%. Equipment error, pharmacological factor, and surgical factor accounted for 12.9%. Conclusion: Critical incidents can occur in the hands of the highly skilled and even in the presence of adequate monitoring. Protocols should be put in place to avoid errors. Critical incident reporting must be encouraged to improve patients' safety and reduce morbidity and mortality.

Factors influencing the missed nursing care in patients from a private hospital

Directory of Open Access Journals (Sweden)

Raúl Hernández-Cruz

Full Text Available ABSTRACT Objective: to determine the factors that influence the missed nursing care in hospitalized patients. Methods: descriptive correlational study developed at a private hospital in Mexico. To identify the missed nursing care and related factors, the MISSCARE survey was used, which measures the care missed and associated factors. The care missed and the factors were grouped in global and dimension rates. For the analysis, descriptive statistics, Spearman’s correlation and simple linear regression were used. Approval for the study was obtained from the ethics committee. Results: the participants were 71 nurses from emergency, intensive care and inpatient services. The global missed care index corresponded to M=7.45 (SD=10.74; the highest missed care index was found in the dimension basic care interventions (M=13.02, SD=17.60. The main factor contributing to the care missed was human resources (M=56.13, SD=21.38. The factors related to the care missed were human resources (rs=0.408, p<0.001 and communication (rs=0.418, p<0.001. Conclusions: the nursing care missed is mainly due to the human resource factor; these study findings will permit the strengthening of nursing care continuity.

A linear current injection generator for the generation of electrons in a nuclear reactor

International Nuclear Information System (INIS)

Kar, Moutushi; Thakur, Satish Kumar; Agiwal, Mamta; Sholapurwala, Zarir H.

2011-01-01

While, operating a nuclear reactor it is absolutely necessary for generating a chain reaction or fission. A chain reaction can be initiated by bombardment of a heavy nucleus with fast moving particles. One of the common methods used for generating a fast moving particle is injecting a very high voltage into a particle accelerator and accelerating high energy particle beams using machine like cyclotron, synchrotron, linear accelerators i.e. linac and similar equipment. These equipment generated and run by several high voltage applications like simple high voltage DC systems and supplies or pulsed electron systems. (author)

Influence of Powder Injection Parameters in High-Pressure Cold Spray

Science.gov (United States)

Ozdemir, Ozan C.; Widener, Christian A.

2017-10-01

High-pressure cold spray systems are becoming widely accepted for use in the structural repair of surface defects of expensive machinery parts used in industrial and military equipment. The deposition quality of cold spray repairs is typically validated using coupon testing and through destructive analysis of mock-ups or first articles for a defined set of parameters. In order to provide a reliable repair, it is important to not only maintain the same processing parameters, but also to have optimum fixed parameters, such as the particle injection location. This study is intended to provide insight into the sensitivity of the way that the powder is injected upstream of supersonic nozzles in high-pressure cold spray systems and the effects of variations in injection parameters on the nature of the powder particle kinetics. Experimentally validated three-dimensional computational fluid dynamics (3D CFD) models are implemented to study the particle impact conditions for varying powder feeder tube size, powder feeder tube axial misalignment, and radial powder feeder injection location on the particle velocity and the deposition shape of aluminum alloy 6061. Outputs of the models are statistically analyzed to explore the shape of the spray plume distribution and resulting coating buildup.

Reductions of PAH and Soot by Center Air Injection

Directory of Open Access Journals (Sweden)

Kazuhiro Yamamoto

2014-07-01

Full Text Available In this study, to reduce the amount of pollutant PAH and soot in the flame, we examined the burner system equipped with a center air injection. For this purpose, by using PAH-LIF and soot LII, we evaluated relative PAH and soot amounts in both the triple port burner and the conventional co-axial burner (double port burner to discuss effects of center air injection on the formation of PAH and soot. The fuel was propane. In the triple port burner, two different blue flames are observed near the burner rim, followed by bright luminous flames with soot. The flame length is longer when the fuel flow velocity is increased. On the other hand, the flame length is shorter with an increase in internal air flow velocity. As for PAH and soot, these amounts of the triple port burner are much smaller than those of the double port burner. For the triple port burner, due to the center air injection, the fuel consumption occurs in both inner and outer flames. On the other hand, for the double port burner, the oxygen is supplied from one side air, and as a result, the fuel consumption rate is relatively lower. Hence, by the center air injection, the fuel consumption is largely accelerated, resulting in the reduction of PAH and soot.

The effect of tertiary surveys on missed injuries in trauma: a systematic review

Directory of Open Access Journals (Sweden)

Keijzers Gerben B

2012-11-01

Full Text Available Abstract Background Trauma tertiary surveys (TTS are advocated to reduce the rate of missed injuries in hospitalized trauma patients. Moreover, the missed injury rate can be a quality indicator of trauma care performance. Current variation of the definition of missed injury restricts interpretation of the effect of the TTS and limits the use of missed injury for benchmarking. Only a few studies have specifically assessed the effect of the TTS on missed injury. We aimed to systematically appraise these studies using outcomes of two common definitions of missed injury rates and long-term health outcomes. Methods A systematic review was performed. An electronic search (without language or publication restrictions of the Cochrane Library, Medline and Ovid was used to identify studies assessing TTS with short-term measures of missed injuries and long-term health outcomes. ‘Missed injury’ was defined as either: Type I any injury missed at primary and secondary survey and detected by the TTS; or Type II any injury missed at primary and secondary survey and missed by the TTS, detected during hospital stay. Two authors independently selected studies. Risk of bias for observational studies was assessed using the Newcastle-Ottawa scale. Results Ten observational studies met our inclusion criteria. None was randomized and none reported long-term health outcomes. Their risk of bias varied considerably. Nine studies assessed Type I missed injury and found an overall rate of 4.3%. A single study reported Type II missed injury with a rate of 1.5%. Three studies reported outcome data on missed injuries for both control and intervention cohorts, with two reporting an increase in Type I missed injuries (3% vs. 7%, PP=0.01. Conclusions Overall Type I and Type II missed injury rates were 4.3% and 1.5%. Routine TTS performance increased Type I and reduced Type II missed injuries. However, evidence is sub-optimal: few observational studies, non-uniform outcome

An injection technique for in-situ remediation of abandoned underground coal mines

International Nuclear Information System (INIS)

Canty, G.A.; Everett, J.W.

1998-01-01

Remediation of underground mines can prove to be a difficult task, given the physical constraints associated with introducing amendments to a subterranean environment. An acid mine abatement project involving in-situ chemical treatment method was conducted by the University of Oklahoma. The treatment method involved the injection of an alkaline coal combustion by-product (CCB) slurry into a flooded mine void (pH 4.4) to create a buffered zone. Injection of the CCB slurry was possible through the use of equipment developed by the petroleum industry for grouting recovery wells. This technology was selected because the CCB slurry could be injected under significant pressure and at a high rate. With higher pressure and rates of injection, a large quantity of slurry can be introduced into the mine within a limited amount of time. Theoretically, the high pressure and rate would improve dispersal of the slurry within the void. In addition, the high pressure is advantageous in fracturing or breaking-down obstructions to injection. During the injection process, a total of 418 tons of CCB was introduced within 15 hours. The mine did not refuse any of the material, and it is likely that a much larger mass could have been added. One injection well was drilled into a pillar of coal. Normally this would pose a problem when introducing a slurry; however, the coal pillar was easily fractured during the injection process. Currently, the pH of the mine discharge is above 6.5 and the alkalinity is approximately 100 mg/L as CACO 3

A field test of a waste containment technology using a new generation of injectable barrier liquids

International Nuclear Information System (INIS)

Moridis, G.; Apps, J.; Persoff, P.; Myer, L.; Muller, S.; Pruess, K.; Yen, P.

1996-08-01

A first stage field injection of a new generation of barrier liquids was successfully completed. Two types of barrier liquids, colloidal silica (CS) and polysiloxane (PSX), were injected into heterogeneous unsaturated deposits of sand, silt, and gravel typical of many of the arid DOE cleanup sites and particularly analogous to the conditions of the Hanford Site. Successful injection by commercially available chemical grouting equipment and the tube-a-manchette technique was demonstrated. Excavation of the grout bulbs permitted visual evaluation of the soil permeation by the grout, as well as sample collection. Both grouts effectively permeated all of the formation. The PSX visually appeared to perform better, producing a more uniform and symmetric permeation regardless of heterogeneity, filling large as well as small pores and providing more structural strength than the CS. Numerical simulation of the injection tests incorporated a stochastic field to represent site heterogeneity and was able to replicate the general test behavior. Tiltmeters were used successfully to monitor surface displacements during grout injection

Transcervical fat injection laryngoplasty for unilateral vocal fold paralysis: an easy way to do the job.

Science.gov (United States)

Elbadan, Hisham E M; Hussein, Wael K A; Elmaghraby, Riham M

2017-12-01

Unilateral vocal fold paralysis resulting in glottic incompetence can cause impairment of laryngeal functions, including airway protection and phonation. The objective of this study is to present an easy new technique for harvesting and injection of abdominal fat into the vocal fold for patients with unilateral vocal fold paralysis. This is a retrospective study of patients carried out on 16 patients suffering from unilateral vocal fold paralysis resulting from different etiologies. All patients were subjected to the protocol of voice assessment pre- and postoperatively. All patients were subjected to fat injection of the paralyzed vocal fold. There was a statistically significant difference between the pre- and postoperative grade of voice parameters. Vocal fold injection using fat medializes a paralyzed vocal fold by increasing vocal fold volume. Fat injections are safe and easily mastered; and in the absence of the standard settings for fat harvesting and injection, it could be performed with minimal equipment that are readily available in any operating room.

Upgrade of the LHC Injection Kicker Magnets

CERN Document Server

Barnes, M J; Baglin, V; Bregliozzi, G; Caspers, F; Calatroni, S; Day, H; Ducimetière, L; Garlaschè, M; Gomes Namora, V; Jimenez, J M; Magnin, N; Mertens, V; Métral, E; Salvant, B; Taborelli, M; Uythoven, J; Weterings, W

2013-01-01

Two LHC injection kicker systems, each comprising 4 magnets per ring, produce a kick of 1.3 T·m with a rise-time of less than 900 ns and a flattop ripple of less than ±0.5%. A beam screen is placed in the aperture of each magnet, to provide a path for the image current of the LHC beam and screen the ferrite yoke against wake fields. The screen consists of a ceramic tube with conductors in the inner wall. The initially implemented beam screen ensured a low rate of electrical breakdowns and an adequately low beam coupling impedance. Operation with increasingly higher intensity beams, stable for many hours at a time, has resulted in substantial heating of the ferrite yoke, sometimes requiring cool-down over several hours before the LHC can be refilled. During the long shutdown in 2013/2014 all eight kicker magnets will be upgraded with an improved beam screen and an increased emissivity of the vacuum tank. In addition equipment adjacent to the injection kickers and various vacuum components will be modified to...

Prevalence and Correlates of Missing Meals Among High School Students-United States, 2010.

Science.gov (United States)

Demissie, Zewditu; Eaton, Danice K; Lowry, Richard; Nihiser, Allison J; Foltz, Jennifer L

2018-01-01

To determine the prevalence and correlates of missing meals among adolescents. The 2010 National Youth Physical Activity and Nutrition Study, a cross-sectional study. School based. A nationally representative sample of 11 429 high school students. Breakfast, lunch, and dinner consumption; demographics; measured and perceived weight status; physical activity and sedentary behaviors; and fruit, vegetable, milk, sugar-sweetened beverage, and fast-food intake. Prevalence estimates for missing breakfast, lunch, or dinner on ≥1 day during the past 7 days were calculated. Associations between demographics and missing meals were tested. Associations of lifestyle and dietary behaviors with missing meals were examined using logistic regression controlling for sex, race/ethnicity, and grade. In 2010, 63.1% of students missed breakfast, 38.2% missed lunch, and 23.3% missed dinner; the prevalence was highest among female and non-Hispanic black students. Being overweight/obese, perceiving oneself to be overweight, and video game/computer use were associated with increased risk of missing meals. Physical activity behaviors were associated with reduced risk of missing meals. Students who missed breakfast were less likely to eat fruits and vegetables and more likely to consume sugar-sweetened beverages and fast food. Breakfast was the most frequently missed meal, and missing breakfast was associated with the greatest number of less healthy dietary practices. Intervention and education efforts might prioritize breakfast consumption.

78 FR 2256 - Extension of the Extended Missing Parts Pilot Program

Science.gov (United States)

2013-01-10

...] Extension of the Extended Missing Parts Pilot Program AGENCY: United States Patent and Trademark Office... pilot program (Extended Missing Parts Pilot Program) in which an applicant, under certain conditions... nonprovisional application. The Extended Missing Parts Pilot Program benefits applicants by permitting additional...

Missed Opportunities for Hepatitis A Vaccination, National Immunization Survey-Child, 2013.

Science.gov (United States)

Casillas, Shannon M; Bednarczyk, Robert A

2017-08-01

To quantify the number of missed opportunities for vaccination with hepatitis A vaccine in children and assess the association of missed opportunities for hepatitis A vaccination with covariates of interest. Weighted data from the 2013 National Immunization Survey of US children aged 19-35 months were used. Analysis was restricted to children with provider-verified vaccination history (n = 13 460). Missed opportunities for vaccination were quantified by determining the number of medical visits a child made when another vaccine was administered during eligibility for hepatitis A vaccine, but hepatitis A vaccine was not administered. Cross-sectional bivariate and multivariate polytomous logistic regression were used to assess the association of missed opportunities for vaccination with child and maternal demographic, socioeconomic, and geographic covariates. In 2013, 85% of children in our study population had initiated the hepatitis A vaccine series, and 60% received 2 or more doses. Children who received zero doses of hepatitis A vaccine had an average of 1.77 missed opportunities for vaccination compared with 0.43 missed opportunities for vaccination in those receiving 2 doses. Children with 2 or more missed opportunities for vaccination initiated the vaccine series 6 months later than children without missed opportunities. In the fully adjusted multivariate model, children who were younger, had ever received WIC benefits, or lived in a state with childcare entry mandates were at a reduced odds for 2 or more missed opportunities for vaccination; children living in the Northeast census region were at an increased odds. Missed opportunities for vaccination likely contribute to the poor coverage for hepatitis A vaccination in children; it is important to understand why children are not receiving the vaccine when eligible. Copyright © 2017 Elsevier Inc. All rights reserved.

Injectable Anisotropic Nanocomposite Hydrogels Direct in Situ Growth and Alignment of Myotubes

International Nuclear Information System (INIS)

De France, Kevin J.; Yager, Kevin G.; Chan, Katelyn J. W.; Corbett, Brandon; Cranston, Emily D.; Hoare, Todd

2017-01-01

Here, while injectable in situ cross-linking hydrogels have attracted increasing attention as minimally invasive tissue scaffolds and controlled delivery systems, their inherently disorganized and isotropic network structure limits their utility in engineering oriented biological tissues. Traditional methods to prepare anisotropic hydrogels are not easily translatable to injectable systems given the need for external equipment to direct anisotropic gel fabrication and/or the required use of temperatures or solvents incompatible with biological systems. Herein, we report a new class of injectable nanocomposite hydrogels based on hydrazone cross-linked poly(oligoethylene glycol methacrylate) and magnetically aligned cellulose nanocrystals (CNCs) capable of encapsulating skeletal muscle myoblasts and promoting their differentiation into highly oriented myotubes in situ. CNC alignment occurs on the same time scale as network gelation and remains fixed after the removal of the magnetic field, enabling concurrent CNC orientation and hydrogel injection. The aligned hydrogels show mechanical and swelling profiles that can be rationally modulated by the degree of CNC alignment and can direct myotube alignment both in two- and three-dimensions following coinjection of the myoblasts with the gel precursor components. As such, these hydrogels represent a critical advancement in anisotropic biomimetic scaffolds that can be generated noninvasively in vivo following simple injection.

Missing data in trial-based cost-effectiveness analysis: An incomplete journey.

Science.gov (United States)

Leurent, Baptiste; Gomes, Manuel; Carpenter, James R

2018-06-01

Cost-effectiveness analyses (CEA) conducted alongside randomised trials provide key evidence for informing healthcare decision making, but missing data pose substantive challenges. Recently, there have been a number of developments in methods and guidelines addressing missing data in trials. However, it is unclear whether these developments have permeated CEA practice. This paper critically reviews the extent of and methods used to address missing data in recently published trial-based CEA. Issues of the Health Technology Assessment journal from 2013 to 2015 were searched. Fifty-two eligible studies were identified. Missing data were very common; the median proportion of trial participants with complete cost-effectiveness data was 63% (interquartile range: 47%-81%). The most common approach for the primary analysis was to restrict analysis to those with complete data (43%), followed by multiple imputation (30%). Half of the studies conducted some sort of sensitivity analyses, but only 2 (4%) considered possible departures from the missing-at-random assumption. Further improvements are needed to address missing data in cost-effectiveness analyses conducted alongside randomised trials. These should focus on limiting the extent of missing data, choosing an appropriate method for the primary analysis that is valid under contextually plausible assumptions, and conducting sensitivity analyses to departures from the missing-at-random assumption. © 2018 The Authors Health Economics published by John Wiley & Sons Ltd.

Semiparametric approach for non-monotone missing covariates in a parametric regression model

KAUST Repository

Sinha, Samiran

2014-02-26

Missing covariate data often arise in biomedical studies, and analysis of such data that ignores subjects with incomplete information may lead to inefficient and possibly biased estimates. A great deal of attention has been paid to handling a single missing covariate or a monotone pattern of missing data when the missingness mechanism is missing at random. In this article, we propose a semiparametric method for handling non-monotone patterns of missing data. The proposed method relies on the assumption that the missingness mechanism of a variable does not depend on the missing variable itself but may depend on the other missing variables. This mechanism is somewhat less general than the completely non-ignorable mechanism but is sometimes more flexible than the missing at random mechanism where the missingness mechansim is allowed to depend only on the completely observed variables. The proposed approach is robust to misspecification of the distribution of the missing covariates, and the proposed mechanism helps to nullify (or reduce) the problems due to non-identifiability that result from the non-ignorable missingness mechanism. The asymptotic properties of the proposed estimator are derived. Finite sample performance is assessed through simulation studies. Finally, for the purpose of illustration we analyze an endometrial cancer dataset and a hip fracture dataset.

Analyzing time-ordered event data with missed observations.

Science.gov (United States)

Dokter, Adriaan M; van Loon, E Emiel; Fokkema, Wimke; Lameris, Thomas K; Nolet, Bart A; van der Jeugd, Henk P

2017-09-01

A common problem with observational datasets is that not all events of interest may be detected. For example, observing animals in the wild can difficult when animals move, hide, or cannot be closely approached. We consider time series of events recorded in conditions where events are occasionally missed by observers or observational devices. These time series are not restricted to behavioral protocols, but can be any cyclic or recurring process where discrete outcomes are observed. Undetected events cause biased inferences on the process of interest, and statistical analyses are needed that can identify and correct the compromised detection processes. Missed observations in time series lead to observed time intervals between events at multiples of the true inter-event time, which conveys information on their detection probability. We derive the theoretical probability density function for observed intervals between events that includes a probability of missed detection. Methodology and software tools are provided for analysis of event data with potential observation bias and its removal. The methodology was applied to simulation data and a case study of defecation rate estimation in geese, which is commonly used to estimate their digestive throughput and energetic uptake, or to calculate goose usage of a feeding site from dropping density. Simulations indicate that at a moderate chance to miss arrival events ( p  = 0.3), uncorrected arrival intervals were biased upward by up to a factor 3, while parameter values corrected for missed observations were within 1% of their true simulated value. A field case study shows that not accounting for missed observations leads to substantial underestimates of the true defecation rate in geese, and spurious rate differences between sites, which are introduced by differences in observational conditions. These results show that the derived methodology can be used to effectively remove observational biases in time-ordered event

Empirical Likelihood in Nonignorable Covariate-Missing Data Problems.

Science.gov (United States)

Xie, Yanmei; Zhang, Biao

2017-04-20

Missing covariate data occurs often in regression analysis, which frequently arises in the health and social sciences as well as in survey sampling. We study methods for the analysis of a nonignorable covariate-missing data problem in an assumed conditional mean function when some covariates are completely observed but other covariates are missing for some subjects. We adopt the semiparametric perspective of Bartlett et al. (Improving upon the efficiency of complete case analysis when covariates are MNAR. Biostatistics 2014;15:719-30) on regression analyses with nonignorable missing covariates, in which they have introduced the use of two working models, the working probability model of missingness and the working conditional score model. In this paper, we study an empirical likelihood approach to nonignorable covariate-missing data problems with the objective of effectively utilizing the two working models in the analysis of covariate-missing data. We propose a unified approach to constructing a system of unbiased estimating equations, where there are more equations than unknown parameters of interest. One useful feature of these unbiased estimating equations is that they naturally incorporate the incomplete data into the data analysis, making it possible to seek efficient estimation of the parameter of interest even when the working regression function is not specified to be the optimal regression function. We apply the general methodology of empirical likelihood to optimally combine these unbiased estimating equations. We propose three maximum empirical likelihood estimators of the underlying regression parameters and compare their efficiencies with other existing competitors. We present a simulation study to compare the finite-sample performance of various methods with respect to bias, efficiency, and robustness to model misspecification. The proposed empirical likelihood method is also illustrated by an analysis of a data set from the US National Health and

Between the Cup and the Lip: Missed Dental Appointments.

Science.gov (United States)

Tandon, Sandeep; Duhan, Reena; Sharma, Meenakshi; Vasudeva, Suraj

2016-05-01

Missed appointments are an issue which have been very commonly noticed but overlooked in Indian dental society. Almost every dentist, general or specialized, private or public, has faced this problem in routine practice but very less research has been conducted on this issue in Asian countries. The aim of this study was to determine the frequency and distribution of missed dental appointments among children and the reasons behind the non-attendance in department of paediatric and preventive dentistry. Patients under 15 years of age who reported during the period March through August 2014 were included in this study. Attendance data and demographical data for patients was obtained from patient records and the hospital database. The type of treatment patients were to receive was gathered from the appointment diaries of staff, postgraduate students and undergraduates. A structured questionnaire regarding the most frequent reasons given by patients for not attending the scheduled appointment was also prepared. The data were analysed using descriptive analysis. Of the total 2294 patients 886 patients failed to come on their scheduled appointment. Percentage of patients who missed their appointments was 38.6%. A 38.2% of them required primary teeth pulp therapy. No significant differences was found between genders regarding the prevalence of missed dental appointments. Only 40% dentist witnessed that the most common reason for their patients to miss dental appointment was "no leave from school". Illness was the second frequent excuse heard by dentists (5/20= 25%) from their patients and attendants. Missed dental appointment was found to be a common issue in paediatric age group. Counseling and motivation is required to be done at first dental visit to reduce the chances of missed appointment.

Dentistry to the rescue of missing children: A review

Science.gov (United States)

Vij, Nitika; Kochhar, Gulsheen Kaur; Chachra, Sanjay; Kaur, Taranjot

2016-01-01

Today's society is becoming increasingly unsafe for children: we frequently hear about new incidents of missing children, which lead to emotional trauma for the loved ones and expose systemic failures of law and order. Parents can take extra precautions to ensure the safety of their children by educating them about ways to protect themselves and keep important records of the child such as updated color photographs, fingerprints, deoxyribonucleic acid (DNA) samples, etc., handy. However, in spite of all efforts, the problem of missing children still remains. Developments in the field of dentistry have empowered dentists with various tools and techniques to play a pivotal role in tracing a missing child. One such tool is Toothprints, a patented arch-shaped thermoplastic dental impression wafer developed by Dr. David Tesini, a paediatric dentist from Massachusetts. Toothprints enables a unique identification of the missing children not only through the bite impression but also through salivary DNA. Besides the use of Toothprints, a dentist can assist investigating agencies in identifying the missing children in multiple ways, including postmortem dental profiling, labeled dental fixtures, DNA extraction from teeth, and serial number engraving on the children's teeth. More importantly, all these tools cause minimal inconvenience to the individual, making a dentist's role in tracking a missing child even more significant. Thus, the simple discipline of maintaining timely dental records with the help of their dentists can save potential hassles for the parents in the future. PMID:27051216

Dentistry to the rescue of missing children: A review.

Science.gov (United States)

Vij, Nitika; Kochhar, Gulsheen Kaur; Chachra, Sanjay; Kaur, Taranjot

2016-01-01

Today's society is becoming increasingly unsafe for children: we frequently hear about new incidents of missing children, which lead to emotional trauma for the loved ones and expose systemic failures of law and order. Parents can take extra precautions to ensure the safety of their children by educating them about ways to protect themselves and keep important records of the child such as updated color photographs, fingerprints, deoxyribonucleic acid (DNA) samples, etc., handy. However, in spite of all efforts, the problem of missing children still remains. Developments in the field of dentistry have empowered dentists with various tools and techniques to play a pivotal role in tracing a missing child. One such tool is Toothprints, a patented arch-shaped thermoplastic dental impression wafer developed by Dr. David Tesini, a paediatric dentist from Massachusetts. Toothprints enables a unique identification of the missing children not only through the bite impression but also through salivary DNA. Besides the use of Toothprints, a dentist can assist investigating agencies in identifying the missing children in multiple ways, including postmortem dental profiling, labeled dental fixtures, DNA extraction from teeth, and serial number engraving on the children's teeth. More importantly, all these tools cause minimal inconvenience to the individual, making a dentist's role in tracking a missing child even more significant. Thus, the simple discipline of maintaining timely dental records with the help of their dentists can save potential hassles for the parents in the future.

Ultrasonographic findings of Myoma, H-mole and Missed abortion

International Nuclear Information System (INIS)

Huh, Nam Yoon; You, H. S.; Seong, K. J.; Park, C. Y.

1982-01-01

Ultrasonography is very important in the diagnosis of various kinds of diseases in Obsterics and Gynecology. It has high diagnostic accuracy in the diagnosis of pelvic masses and widely used for the detection of normal orpathologic pregnancy. But still it is difficult to differentiate degenerated myoma, H-mole and missed abortion by ultrasonography. So the authors analyzed the ultrasonographic findings of 81 patients with myoma(29 cases), H-mole(23 cases), and missed abortion(29 cases) and the results are as follows; 1. Diagnostic accuracy was 8.6% in myoma, 87% in H-mole and 89% in missed abortion. 2. The most typical ultrasonographic finding of myoma was obulated mass contour with nonhomogenous internal echo. 3. The most characteristic finding of H-mole was fine vesicular pattern internal echo with globular enlargement of uterus. 4. The most frequent finding of missed abortion was deformed gestational sac with or without remained fetal echo. 5. Clinical correlation was very important for accurate diagnosis, especially when differential diagnosis was very difficult between myoma with marked cystic degeneration, missed abortion with large distorted gestational sac and H-mole with severe degeneration

iLife '05 The Missing Manual

CERN Document Server

Pogue, David

2005-01-01

The incomparable iLife '05 is the must-have multimedia suite for everyone who owns a Mac--and the envy of everyone who doesn't. iLife '05: The Missing Manual is the definitive iLife '05 book--and what should have come with the suite. There's no better guide to your iLife experience than the #1 bestselling Macintosh author and expert--and Missing Manual series creator--David Pogue. Totally objective and utterly in-the-know, Pogue highlights the newest features, changes, and improvements of iLife '05, covers the capabilities and limitations of each program within the suite, and delivers count

The role of proxy information in missing data analysis.

Science.gov (United States)

Huang, Rong; Liang, Yuanyuan; Carrière, K C

2005-10-01

This article investigates the role of proxy data in dealing with the common problem of missing data in clinical trials using repeated measures designs. In an effort to avoid the missing data situation, some proxy information can be gathered. The question is how to treat proxy information, that is, is it always better to utilize proxy information when there are missing data? A model for repeated measures data with missing values is considered and a strategy for utilizing proxy information is developed. Then, simulations are used to compare the power of a test using proxy to simply utilizing all available data. It is concluded that using proxy information can be a useful alternative when such information is available. The implications for various clinical designs are also considered and a data collection strategy for efficiently estimating parameters is suggested.

Protecting Coastal Areas from Flooding by Injecting Solids into the Subsurface

Science.gov (United States)

Germanovich, L. N.; Murdoch, L.

2008-12-01

Subsidence and sea level rise conspire to increase the risk of flooding in coastal cities throughout the world, and these processes were key contributors to the devastation of New Orleans by hurricane Katrina. Constructing levees and placing fill to raise ground elevations are currently the main options for reducing flooding risks in coastal areas, and both of these options have drawbacks. We suggest that hydromechanical injection of solid compounds suspended in liquid can be used to lift the ground surface and thereby expand the options for protecting such coastal cities as New Orleans, Venice, and Shanghai from flooding. These techniques are broadly related to hydraulic fracturing and compensation grouting, where solid compounds are injected as slurries and cause upward displacements at the ground surface. The equipment and logistics required for hydromechanical solid injection and ground lifting are readily available from current geotechnical and petroleum operations. Hydraulic fractures are routinely created in the upper tens of meters of sediments, where they are filled with a wide range of different proppants for environmental applications. At shallow depths, many of these fractures are sub-parallel to the ground surface and lift their overburden by a few mm to cm, although lifting is not the objective of these fractures. Much larger, vertical displacements, of the order of several meters, could be created in low-cohesion sediments over areas as large as square kilometers. This would be achieved as a result of multiple injections. Injecting solid particulates provides the benefits of a permanent displacement supported by the solids. We have demonstrated that hydraulic fractures will lift the ground surface at shallow depths in Texas near the Sabine River, where the geological setting is generally similar to that of New Orleans (and where, incidentally, hurricane Rita landed in 2005). In these regions, the soft surficial sediments are underlain by relatively

Some 'Near Miss ' Experiences

African Journals Online (AJOL)

perienced health Workers, especially at lower level units, poor referral ... in the wards or operating theatre, and inability to access the busy health .... clinics, costs incurred and by who, who decided on hospitalisation, who .... pected pregnancy as I had missed my period the previous month. .... the patient received attention.

Generation of equipment response spectrum considering equipment-structure interaction

International Nuclear Information System (INIS)

Lee, Sang Hoon; Yoo, Kwang Hoon

2005-01-01

Floor response spectra for dynamic response of subsystem such as equipment, or piping in nuclear power plant are usually generated without considering dynamic interaction between main structure and subsystem. Since the dynamic structural response generally has the narrow-banded shapes, the resulting floor response spectra developed for various locations in the structure usually have high spectral peak amplitudes in the narrow frequency bands corresponding to the natural frequencies of the structural system. The application of such spectra for design of subsystems often leads to excessive design conservatisms, especially when the equipment frequency and structure are at resonance condition. Thus, in order to provide a rational and realistic design input for dynamic analysis and design of equipment, dynamic equipment-structure interaction (ESI) should be considered in developing equipment response spectrum which is particularly important for equipment at the resonance condition. Many analytical methods have been proposed in the past for developing equipment response spectra considering ESI. However, most of these methods have not been adapted to the practical applications because of either the complexities or the lack of rigorousness of the methods. At one hand, mass ratio among the equipment and structure was used as an important parameter to obtain equipment response spectra. Similarly, Tseng has also proposed the analytical method for developing equipment response spectra using mass ratio in the frequency domain. This method is analytically rigorous and can be easily validated. It is based on the dynamic substructuring method as applied to the dynamic soil-structure interaction (SSI) analysis, and can relatively easily be implemented for practical applications without to change the current dynamic analysis and design practice for subsystems. The equipment response spectra derived in this study are also based on Tseng's proposed method

MISSE in the Materials and Processes Technical Information System (MAPTIS )

Science.gov (United States)

Burns, DeWitt; Finckenor, Miria; Henrie, Ben

2013-01-01

Materials International Space Station Experiment (MISSE) data is now being collected and distributed through the Materials and Processes Technical Information System (MAPTIS) at Marshall Space Flight Center in Huntsville, Alabama. MISSE data has been instrumental in many programs and continues to be an important source of data for the space community. To facilitate great access to the MISSE data the International Space Station (ISS) program office and MAPTIS are working to gather this data into a central location. The MISSE database contains information about materials, samples, and flights along with pictures, pdfs, excel files, word documents, and other files types. Major capabilities of the system are: access control, browsing, searching, reports, and record comparison. The search capabilities will search within any searchable files so even if the desired meta-data has not been associated data can still be retrieved. Other functionality will continue to be added to the MISSE database as the Athena Platform is expanded

Moderation analysis with missing data in the predictors.

Science.gov (United States)

Zhang, Qian; Wang, Lijuan

2017-12-01

The most widely used statistical model for conducting moderation analysis is the moderated multiple regression (MMR) model. In MMR modeling, missing data could pose a challenge, mainly because the interaction term is a product of two or more variables and thus is a nonlinear function of the involved variables. In this study, we consider a simple MMR model, where the effect of the focal predictor X on the outcome Y is moderated by a moderator U. The primary interest is to find ways of estimating and testing the moderation effect with the existence of missing data in X. We mainly focus on cases when X is missing completely at random (MCAR) and missing at random (MAR). Three methods are compared: (a) Normal-distribution-based maximum likelihood estimation (NML); (b) Normal-distribution-based multiple imputation (NMI); and (c) Bayesian estimation (BE). Via simulations, we found that NML and NMI could lead to biased estimates of moderation effects under MAR missingness mechanism. The BE method outperformed NMI and NML for MMR modeling with missing data in the focal predictor, missingness depending on the moderator and/or auxiliary variables, and correctly specified distributions for the focal predictor. In addition, more robust BE methods are needed in terms of the distribution mis-specification problem of the focal predictor. An empirical example was used to illustrate the applications of the methods with a simple sensitivity analysis. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Statistical analysis of longitudinal quality of life data with missing measurements

NARCIS (Netherlands)

Zwinderman, A. H.

1992-01-01

The statistical analysis of longitudinal quality of life data in the presence of missing data is discussed. In cancer trials missing data are generated due to the fact that patients die, drop out, or are censored. These missing data are problematic in the monitoring of the quality of life during the

9 CFR 590.502 - Equipment and utensils; PCB-containing equipment.

Science.gov (United States)

2010-01-01

... Sanitary Standards and accepted practices currently in effect for such equipment. (c) New or replacement equipment or machinery (including any replacement parts) brought onto the premises of any official plant... equipment and machinery, and any replacement parts for such equipment and machinery. Totally enclosed...

Exoatmospheric intercepts using zero effort miss steering for midcourse guidance

Science.gov (United States)

Newman, Brett

The suitability of proportional navigation, or an equivalent zero effort miss formulation, for exatmospheric intercepts during midcourse guidance, followed by a ballistic coast to the endgame, is addressed. The problem is formulated in terms of relative motion in a general, three dimensional framework. The proposed guidance law for the commanded thrust vector orientation consists of the sum of two terms: (1) along the line of sight unit direction and (2) along the zero effort miss component perpendicular to the line of sight and proportional to the miss itself and a guidance gain. If the guidance law is to be suitable for longer range targeting applications with significant ballistic coasting after burnout, determination of the zero effort miss must account for the different gravitational accelerations experienced by each vehicle. The proposed miss determination techniques employ approximations for the true differential gravity effect and thus, are less accurate than a direct numerical propagation of the governing equations, but more accurate than a baseline determination, which assumes equal accelerations for both vehicles. Approximations considered are constant, linear, quadratic, and linearized inverse square models. Theoretical results are applied to a numerical engagement scenario and the resulting performance is evaluated in terms of the miss distances determined from nonlinear simulation.

577 Missed opportunities for inununisation in Natal health facilities

African Journals Online (AJOL)

Wkly Epidemwl Rec 1984; 59: 117-119. 5. Expanded Programme on Immunization. Missed immunizacion opportunities and acceptability of immunization. Wkly Epidemiol Rec. 1989;64: 181-184. . . 6. Loevinsohn BP. Missed opportunities for immunization during visits for curative care: practical reasons for their occurrence.

78 FR 37598 - Missing Participants in Individual Account Plans

Science.gov (United States)

2013-06-21

... information from the public to assist it in making decisions about implementing a new program to deal with... allocated to such participant's account.'' Before making decisions about implementing a missing participants... PENSION BENEFIT GUARANTY CORPORATION Missing Participants in Individual Account Plans AGENCY...

Autoregressive-model-based missing value estimation for DNA microarray time series data.

Science.gov (United States)

Choong, Miew Keen; Charbit, Maurice; Yan, Hong

2009-01-01

Missing value estimation is important in DNA microarray data analysis. A number of algorithms have been developed to solve this problem, but they have several limitations. Most existing algorithms are not able to deal with the situation where a particular time point (column) of the data is missing entirely. In this paper, we present an autoregressive-model-based missing value estimation method (ARLSimpute) that takes into account the dynamic property of microarray temporal data and the local similarity structures in the data. ARLSimpute is especially effective for the situation where a particular time point contains many missing values or where the entire time point is missing. Experiment results suggest that our proposed algorithm is an accurate missing value estimator in comparison with other imputation methods on simulated as well as real microarray time series datasets.

Outlier Removal in Model-Based Missing Value Imputation for Medical Datasets

Directory of Open Access Journals (Sweden)

Min-Wei Huang

2018-01-01

Full Text Available Many real-world medical datasets contain some proportion of missing (attribute values. In general, missing value imputation can be performed to solve this problem, which is to provide estimations for the missing values by a reasoning process based on the (complete observed data. However, if the observed data contain some noisy information or outliers, the estimations of the missing values may not be reliable or may even be quite different from the real values. The aim of this paper is to examine whether a combination of instance selection from the observed data and missing value imputation offers better performance than performing missing value imputation alone. In particular, three instance selection algorithms, DROP3, GA, and IB3, and three imputation algorithms, KNNI, MLP, and SVM, are used in order to find out the best combination. The experimental results show that that performing instance selection can have a positive impact on missing value imputation over the numerical data type of medical datasets, and specific combinations of instance selection and imputation methods can improve the imputation results over the mixed data type of medical datasets. However, instance selection does not have a definitely positive impact on the imputation result for categorical medical datasets.

Cyclists’ Anger As Determinant of Near Misses Involving Different Road Users

Directory of Open Access Journals (Sweden)

Víctor Marín Puchades

2017-12-01

Full Text Available Road anger constitutes one of the determinant factors related to safety outcomes (e.g., accidents, near misses. Although cyclists are considered vulnerable road users due to their relatively high rate of fatalities in traffic, previous research has solely focused on car drivers, and no study has yet investigated the effect of anger on cyclists’ safety outcomes. The present research aims to investigate, for the first time, the effects of cycling anger toward different types of road users on near misses involving such road users and near misses in general. Using a daily diary web-based questionnaire, we collected data about daily trips, bicycle use, near misses experienced, cyclist’s anger and demographic information from 254 Spanish cyclists. Poisson regression was used to assess the association of cycling anger with near misses, which is a count variable. No relationship was found between general cycling anger and near misses occurrence. Anger toward specific road users had different effects on the probability of near misses with different road users. Anger toward the interaction with car drivers increased the probability of near misses involving cyclists and pedestrians. Anger toward interaction with pedestrians was associated with higher probability of near misses with pedestrians. Anger toward cyclists exerted no effect on the probability of near misses with any road user (i.e., car drivers, cyclists or pedestrians, whereas anger toward the interactions with the police had a diminishing effect on the occurrence of near misses’ involving all types of road users. The present study demonstrated that the effect of road anger on safety outcomes among cyclists is different from that of motorists. Moreover, the target of anger played an important role on safety both for the cyclist and the specific road users. Possible explanations for these differences are based on the difference in status and power with motorists, as well as on the potential

Equipment considerations

International Nuclear Information System (INIS)

Anon.

1992-01-01

Trace or ultratrace analyses require that the HPLC equipment used, including the detector, be optimal for such determinations. HPLC detectors are discussed at length in Chapter 4; discussion here is limited to the rest of the equipment. In general, commercial equipment is adequate for trace analysis; however, as the authors approach ultratrace analysis, it becomes very important to examine the equipment thoroughly and optimize it, where possible. For this reason they will review the equipment commonly used in HPLC and discuss the optimization steps. Detectability in HPLC is influenced by two factors (1): (a) baseline noise or other interferences that lead to errors in assigning the baseline absorbance; (b) peak width. 87 refs

Missing value imputation for epistatic MAPs

LENUS (Irish Health Repository)

Ryan, Colm

2010-04-20

Abstract Background Epistatic miniarray profiling (E-MAPs) is a high-throughput approach capable of quantifying aggravating or alleviating genetic interactions between gene pairs. The datasets resulting from E-MAP experiments typically take the form of a symmetric pairwise matrix of interaction scores. These datasets have a significant number of missing values - up to 35% - that can reduce the effectiveness of some data analysis techniques and prevent the use of others. An effective method for imputing interactions would therefore increase the types of possible analysis, as well as increase the potential to identify novel functional interactions between gene pairs. Several methods have been developed to handle missing values in microarray data, but it is unclear how applicable these methods are to E-MAP data because of their pairwise nature and the significantly larger number of missing values. Here we evaluate four alternative imputation strategies, three local (Nearest neighbor-based) and one global (PCA-based), that have been modified to work with symmetric pairwise data. Results We identify different categories for the missing data based on their underlying cause, and show that values from the largest category can be imputed effectively. We compare local and global imputation approaches across a variety of distinct E-MAP datasets, showing that both are competitive and preferable to filling in with zeros. In addition we show that these methods are effective in an E-MAP from a different species, suggesting that pairwise imputation techniques will be increasingly useful as analogous epistasis mapping techniques are developed in different species. We show that strongly alleviating interactions are significantly more difficult to predict than strongly aggravating interactions. Finally we show that imputed interactions, generated using nearest neighbor methods, are enriched for annotations in the same manner as measured interactions. Therefore our method potentially

Results of Database Studies in Spine Surgery Can Be Influenced by Missing Data.

Science.gov (United States)

Basques, Bryce A; McLynn, Ryan P; Fice, Michael P; Samuel, Andre M; Lukasiewicz, Adam M; Bohl, Daniel D; Ahn, Junyoung; Singh, Kern; Grauer, Jonathan N

2017-12-01

National databases are increasingly being used for research in spine surgery; however, one limitation of such databases that has received sparse mention is the frequency of missing data. Studies using these databases often do not emphasize the percentage of missing data for each variable used and do not specify how patients with missing data are incorporated into analyses. This study uses the American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP) database to examine whether different treatments of missing data can influence the results of spine studies. (1) What is the frequency of missing data fields for demographics, medical comorbidities, preoperative laboratory values, operating room times, and length of stay recorded in ACS-NSQIP? (2) Using three common approaches to handling missing data, how frequently do those approaches agree in terms of finding particular variables to be associated with adverse events? (3) Do different approaches to handling missing data influence the outcomes and effect sizes of an analysis testing for an association with these variables with occurrence of adverse events? Patients who underwent spine surgery between 2005 and 2013 were identified from the ACS-NSQIP database. A total of 88,471 patients undergoing spine surgery were identified. The most common procedures were anterior cervical discectomy and fusion, lumbar decompression, and lumbar fusion. Demographics, comorbidities, and perioperative laboratory values were tabulated for each patient, and the percent of missing data was noted for each variable. These variables were tested for an association with "any adverse event" using three separate multivariate regressions that used the most common treatments for missing data. In the first regression, patients with any missing data were excluded. In the second regression, missing data were treated as a negative or "reference" value; for continuous variables, the mean of each variable's reference range

Patient understanding of oral contraceptive pill instructions related to missed pills: a systematic review.

Science.gov (United States)

Zapata, Lauren B; Steenland, Maria W; Brahmi, Dalia; Marchbanks, Polly A; Curtis, Kathryn M

2013-05-01

Instructions on what to do after pills are missed are critical to reducing unintended pregnancies resulting from patient non-adherence to oral contraceptive (OC) regimens. Missed pill instructions have previously been criticized for being too complex, lacking a definition of what is meant by "missed pills," and for being confusing to women who may not know the estrogen content of their formulation. To help inform the development of missed pill guidance to be included in the forthcoming US Selected Practice Recommendations, the objective of this systematic review was to evaluate the evidence on patient understanding of missed pill instructions. We searched the PubMed database for peer-reviewed articles that examined patient understanding of OC pill instructions that were published in any language from inception of the database through March 2012. We included studies that examined women's knowledge and understanding of missed pill instructions after exposure to some written material (e.g., patient package insert, brochure), as well as studies that compared different types of missed pill instructions on women's comprehension. We used standard abstract forms and grading systems to summarize and assess the quality of the evidence. From 1620 articles, nine studies met our inclusion criteria. Evidence from one randomized controlled trial (RCT) and two descriptive studies found that more women knew what to do after missing 1 pill than after missing 2 or 3 pills (Level I, good, to Level II-3, poor), and two descriptive studies found that more women knew what to do after missing 2 pills than after missing 3 pills (Level II-3, fair). Data from two descriptive studies documented the difficulty women have understanding missed pill instructions contained in patient package inserts (Level II-3, poor), and evidence from two RCTs found that providing written brochures with information on missed pill instructions in addition to contraceptive counseling significantly improved

Uncovering missing links with cold ends

Science.gov (United States)

Zhu, Yu-Xiao; Lü, Linyuan; Zhang, Qian-Ming; Zhou, Tao

2012-11-01

To evaluate the performance of prediction of missing links, the known data are randomly divided into two parts, the training set and the probe set. We argue that this straightforward and standard method may lead to terrible bias, since in real biological and information networks, missing links are more likely to be links connecting low-degree nodes. We therefore study how to uncover missing links with low-degree nodes, namely links in the probe set are of lower degree products than a random sampling. Experimental analysis on ten local similarity indices and four disparate real networks reveals a surprising result that the Leicht-Holme-Newman index [E.A. Leicht, P. Holme, M.E.J. Newman, Vertex similarity in networks, Phys. Rev. E 73 (2006) 026120] performs the best, although it was known to be one of the worst indices if the probe set is a random sampling of all links. We further propose an parameter-dependent index, which considerably improves the prediction accuracy. Finally, we show the relevance of the proposed index to three real sampling methods: acquaintance sampling, random-walk sampling and path-based sampling.

Mani, Miss Anna Modayil

Indian Academy of Sciences (India)

Home; Fellowship. Fellow Profile. Elected: 1960 Section: Earth & Planetary Sciences. Mani, Miss Anna Modayil A.I.I.Sc., FNA 1971-79; Secretary 1977-79. Date of birth: 23 August 1918. Date of death: 16 August 2001. Specialization: Atmospheric Physics and Instrumentation Last known address: c/o Mr K.T. Chandy, 14, ...

Medical Issues: Equipment

Science.gov (United States)

... Information Packets Equipment Pool Living With SMA Medical Issues Palliative Breathing Orthopedics Nutrition Equipment Daily Life At ... curesma.org > support & care > living with sma > medical issues > equipment Equipment Individuals with SMA often require a ...

ErythropoieSIS stimulating agent (ESA use is increased following missed dialysis sessions

Directory of Open Access Journals (Sweden)

T. Christopher Bond

2012-06-01

Missed session episodes result in significant increases in ESA utilization in the post-miss period, and also in total monthly ESA use. Such increases should be considered in any assessment of impact of missed sessions: both clinical and economic.

KONVERGENSI ESTIMATOR DALAM MODEL MIXTURE BERBASIS MISSING DATA

Directory of Open Access Journals (Sweden)

N Dwidayati

2014-06-01

Full Text Available Abstrak __________________________________________________________________________________________ Model mixture dapat mengestimasi proporsi pasien yang sembuh (cured dan fungsi survival pasien tak sembuh (uncured. Pada kajian ini, model mixture dikembangkan untuk  analisis cure rate berbasis missing data. Ada beberapa metode yang dapat digunakan untuk analisis missing data. Salah satu metode yang dapat digunakan adalah Algoritma EM, Metode ini didasarkan pada 2 (dua langkah, yaitu: (1 Expectation Step dan (2 Maximization Step. Algoritma EM merupakan pendekatan iterasi untuk mempelajari model dari data dengan nilai hilang melalui 4 (empat langkah, yaitu(1 pilih himpunan inisial dari parameter untuk sebuah model, (2 tentukan nilai ekspektasi untuk data hilang, (3 buat induksi parameter model baru dari gabungan nilai ekspekstasi dan data asli, dan (4 jika parameter tidak converged, ulangi langkah 2 menggunakan model baru. Berdasar kajian yang dilakukan dapat ditunjukkan bahwa pada algoritma EM, log-likelihood untuk missing data mengalami kenaikan setelah dilakukan setiap iterasi dari algoritmanya. Dengan demikian berdasar algoritma EM, barisan likelihood konvergen jika likelihood terbatas ke bawah.   Abstract __________________________________________________________________________________________ Model mixture can estimate proportion of recovering patient  and function of patient survival do not recover. At this study, model mixture developed to analyse cure rate bases on missing data. There are some method which applicable to analyse missing data. One of method which can be applied is Algoritma EM, This method based on 2 ( two step, that is: ( 1 Expectation Step and ( 2 Maximization Step. EM Algorithm is approach of iteration to study model from data with value loses through 4 ( four step, yaitu(1 select;chooses initial gathering from parameter for a model, ( 2 determines expectation value for data to lose, ( 3 induce newfangled parameter

Posttraumatic stress disorder in women with war missing family members.

Science.gov (United States)

Baraković, Devla; Avdibegović, Esmina; Sinanović, Osman

2014-12-01

Research in crisis areas indicate that survivors' responses to the forced disappearance of family members are similar to reactions to other traumatic events. The aim of this study was to determine the presence of symptoms of posttraumatic stress disorder (PTSD) in women with war missing family members in Bosnia and Herzegovina 18 years after the war in this region (1992-1995). The study included 160 women aged 47.1±14.0 from three regions of Bosnia and Herzegovina. It was carried out in the period from April 2010 to May 2011. Of the 160 participants, 120 women had a war missing family member and 40 women had no war missing family members. The Harvard Trauma Questionnaire (HTQ), the Beck Depression Inventory (BDI) and the Hamilton Anxiety Rating Scale (HAMA) were used for data collection. Basic socio-demographic data and data concerning the missing family members were also collected. Women with war missing family members experienced significantly more traumatic war experiences (18.43±5.27 vs 6.57±4.34, pfamily members. Women with war missing family members showed significantly more severe PTSD symptoms. Based on the results of this study, it was determined that the forced disappearance of a family member is an ambiguous situation that can be characterized as a traumatic experience.

Why Patients Miss Follow-Up Appointments: A Prospective Control ...

African Journals Online (AJOL)

Reasons include: transport (19 responses), ill-health (6) and financial constraints (5). State transport was unavailable to almost twothirds of the responders who cited transport as a problem. Conclusions: The 17% missed appointment rate is largely due to transport constraints. The commonest time for patients to miss ...

40 CFR 98.405 - Procedures for estimating missing data.

Science.gov (United States)

2010-07-01

... meter malfunctions), a substitute data value for the missing quantity measurement must be used in the... period for any reason, the reporter shall use either its delivering pipeline measurements or the default... § 98.405 Procedures for estimating missing data. (a) Whenever a quality-assured value of the quantity...

Analysis of cerebral vessels dynamics using experimental data with missed segments

Science.gov (United States)

Pavlova, O. N.; Abdurashitov, A. S.; Ulanova, M. V.; Shihalov, G. M.; Semyachkina-Glushkovskaya, O. V.; Pavlov, A. N.

2018-04-01

Physiological signals often contain various bad segments that occur due to artifacts, failures of the recording equipment or varying experimental conditions. The related experimental data need to be preprocessed to avoid such parts of recordings. In the case of few bad segments, they can simply be removed from the signal and its analysis is further performed. However, when there are many extracted segments, the internal structure of the analyzed physiological process may be destroyed, and it is unclear whether such signal can be used in diagnostic-related studies. In this paper we address this problem for the case of cerebral vessels dynamics. We perform analysis of simulated data in order to reveal general features of quantifying scaling features of complex signals with distinct correlation properties and show that the effects of data loss are significantly different for experimental data with long-range correlations and anti-correlations. We conclude that the cerebral vessels dynamics is significantly less sensitive to missed data fragments as compared with signals with anti-correlated statistics.

Thermal analysis of the LHC injection kicker magnets

Science.gov (United States)

Vega, L.; Abánades, A.; Barnes, M. J.; Vlachodimitropoulos, V.; Weterings, W.

2017-07-01

The CERN Large Hadron Collider LHC is equipped with two fast pulsed magnet systems (MKIs) that inject particle beams coming from the injector chain. Operation with high intensity beams for many hours can lead to significant beam induced heating of the ferrite yokes of the MKIs. When the ferrite exceeds the Curie temperature of 125°C it loses its magnetic properties, preventing further injection until the ferrite cools down, potentially causing a delay of several hours. Hence important upgrades of the beam-screen were implemented after Run 1 of LHC. However, the High-Luminosity (HL) LHC will be operated with significantly higher intensity beams and hence additional measures are required to limit the ferrite temperature. These magnets operate under ultra-high vacuum conditions: convection is negligible and, as a result of low emissivity of the inside of the vacuum tanks, thermal radiation is limited. A detailed study of the thermal behaviour of these magnets is reported and compared with measurements. In addition several options to improve cooling of the ferrites are presented and analysed.

Missing data and the accuracy of magnetic-observatory hour means

Directory of Open Access Journals (Sweden)

J. J. Love

2009-09-01

Full Text Available Analysis is made of the accuracy of magnetic-observatory hourly means constructed from definitive minute data having missing values (gaps. Bootstrap sampling from different data-gap distributions is used to estimate average errors on hourly means as a function of the number of missing data. Absolute and relative error results are calculated for horizontal-intensity, declination, and vertical-component data collected at high, medium, and low magnetic latitudes. For 90% complete coverage (10% missing data, average (RMS absolute errors on hourly means are generally less than errors permitted by Intermagnet for minute data. As a rule of thumb, the average relative error for hourly means with 10% missing minute data is approximately equal to 10% of the hourly standard deviation of the source minute data.

Missing Value Imputation Based on Gaussian Mixture Model for the Internet of Things

Directory of Open Access Journals (Sweden)

Xiaobo Yan

2015-01-01

Full Text Available This paper addresses missing value imputation for the Internet of Things (IoT. Nowadays, the IoT has been used widely and commonly by a variety of domains, such as transportation and logistics domain and healthcare domain. However, missing values are very common in the IoT for a variety of reasons, which results in the fact that the experimental data are incomplete. As a result of this, some work, which is related to the data of the IoT, can’t be carried out normally. And it leads to the reduction in the accuracy and reliability of the data analysis results. This paper, for the characteristics of the data itself and the features of missing data in IoT, divides the missing data into three types and defines three corresponding missing value imputation problems. Then, we propose three new models to solve the corresponding problems, and they are model of missing value imputation based on context and linear mean (MCL, model of missing value imputation based on binary search (MBS, and model of missing value imputation based on Gaussian mixture model (MGI. Experimental results showed that the three models can improve the accuracy, reliability, and stability of missing value imputation greatly and effectively.

Nurses' personal and ward accountability and missed nursing care: A cross-sectional study.

Science.gov (United States)

Srulovici, Einav; Drach-Zahavy, Anat

2017-10-01

Missed nursing care is considered an act of omission with potentially detrimental consequences for patients, nurses, and organizations. Although the theoretical conceptualization of missed nursing care specifies nurses' values, attitudes, and perceptions of their work environment as its core antecedents, empirical studies have mainly focused on nurses' socio-demographic and professional attributes. Furthermore, assessment of missed nursing care has been mainly based on same-source methods. This study aimed to test the joint effects of personal and ward accountability on missed nursing care, by using both focal (the nurse whose missed nursing care is examined) and incoming (the nurse responsible for the same patients at the subsequent shift) nurses' assessments of missed nursing care. A cross-sectional design, where nurses were nested in wards. A total of 172 focal and 123 incoming nurses from 32 nursing wards in eight hospitals. Missed nursing care was assessed with the 22-item MISSCARE survey using two sources: focal and incoming nurses. Personal and ward accountability were assessed by the focal nurse with two 19-item scales. Nurses' socio-demographics and ward and shift characteristics were also collected. Mixed linear models were used as the analysis strategy. Focal and incoming nurses reported occasional missed nursing care of the focal nurse (Mean=1.87, SD=0.71 and Mean=2.09, SD=0.84, respectively; r=0.55, ppersonal socio-demographic characteristics, higher personal accountability was significantly associated with decreased missed care (β=-0.29, p0.05). The interaction effect was significant (β=-0.31, ppersonal accountability and missed nursing care. Similar patterns were obtained for the incoming nurses' assessment of focal nurse's missed care. Use of focal and incoming nurses' missed nursing care assessments limited the common source bias and strengthened our findings. Personal and ward accountability are significant values, which are associated with

Missing level corrections using neutron spacings

International Nuclear Information System (INIS)

Mitchell, G.E.; Shriner, J.F. Jr.

2009-11-01

Nuclear level densities are very important for a wide variety of pure and applied neutron physics. Most of the relevant information is obtained from neutron resonance data. The key correction to the raw experimental data is for missing levels. All of the standard correction methods assume that the neutron resonances obey the predictions of the Gaussian Orthogonal Ensemble version of Random Matrix Theory (RMT) and utilize comparison with the Porter-Thomas distribution of reduced widths in order to determine the fraction of missing levels. Here we adopt an alternate approach, comparing the neutron data with the predictions of RMT for eigenvalue statistics. Since in RMT the widths and eigenvalues are independent, analysis of the eigenvalues provides an independent analysis of the same data set. We summarize recent work in this area using the nearest neighbour spacing distribution, and we also develop tests that utilize several other eigenvalue statistics to provide additional estimates of the missing fraction of levels. These additional statistics include the key test for long range order - the Dyson-Mehta Δ 3 statistic - as well as the thermodynamic energy (that arises from Dyson's Circular Orthogonal Ensemble), the linear correlation coefficient of adjacent spacings (a measure of short range anti-correlation), and a statistic related to the Q statistic defined by Dyson and Mehta in the early 1960s. Developed FORTRAN code is available at http://www-nds.iaea.org/missing-levels/. These tests are applied to the s-wave neutron resonances in n + 238 U and n + 232 Th. The results for 238 U are consistent with each other and raise some issues concerning data purity. For the 232 Th data, all of the tests are in excellent agreement. (author)

40 CFR 75.37 - Missing data procedures for moisture.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Missing data procedures for moisture... data procedures for moisture. (a) The owner or operator of a unit with a continuous moisture monitoring system shall substitute for missing moisture data using the procedures of this section. (b) Where no...

Fabrication of U-10wt.%Zr Fuel slug for SFR by Injection Casting

International Nuclear Information System (INIS)

Kim, Jong Hwan; Song, Hoon; Kim, Hyung Tae; Ko, Young Mo; Kim, Ki Hwan; Lee, Chan B.

2013-01-01

The fabrication technology of metal fuel has been developed by various methods such as rolling, swaging, wire drawing, and co-extrusion, but each of these methods had process limitations requiring an additional subsequent process, and needing the fabrication equipment is complex, which is not favorable for remote use. A practical process of metallic fuel fabrication for an SFR needs to be cost efficient, suitable for remote operation, and capable of mass production while reducing the amount of radioactive waste. Injection casting was chosen as the most promising technique, in the early 1950s, and this technique has been applied to fuel slug fabrication for the Experimental Breeder Reactor-II (EBR-II) driver and the Fast Flux Test Facility (FFTF) fuel pins. Because of the simplistic nature of the process and equipment, compared to other processes examined, this process has been successfully used in a remote operation environment for fueling of the EBR-II reactor. In this study, vacuum injection casting suitable for remote operation has been developed to fabricate metallic fuel for an SFR. Vacuum injection casting technique was developed to fabricate metallic fuel for an SFR. The appearance of the fabricated U-10wt.%Zr fuel was generally sound and the internal integrity was found to be satisfactory through gamma-ray radiography. Minimum fuel losses after casting relative to the initial charge amount of U-10wt.%Zr fuel slugs met the proposed goal of less than 0.1% fuel losses during fabrication. Modifications of the current facility system and advanced casting techniques are underway to produce higher quality fuel slugs

Fabrication of U-10wt.%Zr Fuel slug for SFR by Injection Casting

Energy Technology Data Exchange (ETDEWEB)

Kim, Jong Hwan; Song, Hoon; Kim, Hyung Tae; Ko, Young Mo; Kim, Ki Hwan; Lee, Chan B. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-10-15

The fabrication technology of metal fuel has been developed by various methods such as rolling, swaging, wire drawing, and co-extrusion, but each of these methods had process limitations requiring an additional subsequent process, and needing the fabrication equipment is complex, which is not favorable for remote use. A practical process of metallic fuel fabrication for an SFR needs to be cost efficient, suitable for remote operation, and capable of mass production while reducing the amount of radioactive waste. Injection casting was chosen as the most promising technique, in the early 1950s, and this technique has been applied to fuel slug fabrication for the Experimental Breeder Reactor-II (EBR-II) driver and the Fast Flux Test Facility (FFTF) fuel pins. Because of the simplistic nature of the process and equipment, compared to other processes examined, this process has been successfully used in a remote operation environment for fueling of the EBR-II reactor. In this study, vacuum injection casting suitable for remote operation has been developed to fabricate metallic fuel for an SFR. Vacuum injection casting technique was developed to fabricate metallic fuel for an SFR. The appearance of the fabricated U-10wt.%Zr fuel was generally sound and the internal integrity was found to be satisfactory through gamma-ray radiography. Minimum fuel losses after casting relative to the initial charge amount of U-10wt.%Zr fuel slugs met the proposed goal of less than 0.1% fuel losses during fabrication. Modifications of the current facility system and advanced casting techniques are underway to produce higher quality fuel slugs.

Treatment Efficacy of Electromyography versus Fiberscopy-Guided Botulinum Toxin Injection in Adductor Spasmodic Dysphonia Patients: A Prospective Comparative Study

Science.gov (United States)

Kim, Jae Wook; Park, Jae Hong; Park, Ki Nam; Lee, Seung Won

2014-01-01

Introduction. This study prospectively evaluates and compares the treatment efficacy of botulinum toxin injection under electromyography guidance (EMG group) and percutaneous botulinum toxin injection under flexible fiberscopic guidance (fiberscopy group). Methods. Thirty patients with adductor spasmodic dysphonia (ADSD), who had never received treatment, were randomly allocated into EMG- or fiberscopy-guided botulinum toxin injections between March 2008 and February 2010. We assessed acoustic and aerodynamic voice parameters, and the voice handicap index (VHI) before injection and at 1, 3, and 6 months after injection. Results. The mean total dosage of botulinum toxin was similar for both groups: 1.7 ± 0.5 U for the EMG group and 1.8 ± 0.4 U for the fiberscopy group (P > 0.05). There were no significant differences in outcomes between the two groups in either the duration of effectiveness or complications such as breathy voice and aspiration. Conclusion. Botulinum toxin injection under fiberscopic guidance is a viable alternative to EMG-guided botulinum toxin injection for the treatment of adductor spasmodic dysphonia when EMG equipment is unavailable. PMID:25383369

Treatment Efficacy of Electromyography versus Fiberscopy-Guided Botulinum Toxin Injection in Adductor Spasmodic Dysphonia Patients: A Prospective Comparative Study

Directory of Open Access Journals (Sweden)

Jae Wook Kim

2014-01-01

Full Text Available Introduction. This study prospectively evaluates and compares the treatment efficacy of botulinum toxin injection under electromyography guidance (EMG group and percutaneous botulinum toxin injection under flexible fiberscopic guidance (fiberscopy group. Methods. Thirty patients with adductor spasmodic dysphonia (ADSD, who had never received treatment, were randomly allocated into EMG- or fiberscopy-guided botulinum toxin injections between March 2008 and February 2010. We assessed acoustic and aerodynamic voice parameters, and the voice handicap index (VHI before injection and at 1, 3, and 6 months after injection. Results. The mean total dosage of botulinum toxin was similar for both groups: 1.7 ± 0.5 U for the EMG group and 1.8 ± 0.4 U for the fiberscopy group (P>0.05. There were no significant differences in outcomes between the two groups in either the duration of effectiveness or complications such as breathy voice and aspiration. Conclusion. Botulinum toxin injection under fiberscopic guidance is a viable alternative to EMG-guided botulinum toxin injection for the treatment of adductor spasmodic dysphonia when EMG equipment is unavailable.

Treatment efficacy of electromyography versus fiberscopy-guided botulinum toxin injection in adductor spasmodic dysphonia patients: a prospective comparative study.

Science.gov (United States)

Kim, Jae Wook; Park, Jae Hong; Park, Ki Nam; Lee, Seung Won

2014-01-01

This study prospectively evaluates and compares the treatment efficacy of botulinum toxin injection under electromyography guidance (EMG group) and percutaneous botulinum toxin injection under flexible fiberscopic guidance (fiberscopy group). Thirty patients with adductor spasmodic dysphonia (ADSD), who had never received treatment, were randomly allocated into EMG- or fiberscopy-guided botulinum toxin injections between March 2008 and February 2010. We assessed acoustic and aerodynamic voice parameters, and the voice handicap index (VHI) before injection and at 1, 3, and 6 months after injection. The mean total dosage of botulinum toxin was similar for both groups: 1.7 ± 0.5 U for the EMG group and 1.8 ± 0.4 U for the fiberscopy group (P > 0.05). There were no significant differences in outcomes between the two groups in either the duration of effectiveness or complications such as breathy voice and aspiration. Botulinum toxin injection under fiberscopic guidance is a viable alternative to EMG-guided botulinum toxin injection for the treatment of adductor spasmodic dysphonia when EMG equipment is unavailable.

A missing-bending-magnet scheme for PEP

International Nuclear Information System (INIS)

Liu, R.Z.; Winick, H.

1988-01-01

This article presents a missing-bending-magnet scheme for PEP as a modification that could be considered if PEP were available as a fully dedicated synchrotron radiation source. The scheme can be applied to one or more PEP sextants without changing the rest. By removing some bending magnets, rearranging the remaining magnets, and adding two quadrupoles, ten additional straight sections per sextant can be created, each 5 m or more in length, for insertion devices. Beam lines therefrom, plus possible beam lines from bending magnets would enter a continuous experimental hall instead of individual tunnels and halls for each beam line. This should result in construction cost savings and increased operations efficiency. The ideal beam orbit is unchanged at the two ends and the middle of the sextant. At the end of the curved part of the sextant the lattice functions match those of the long interaction region straight section in the low emittance configuration of PEP. The electron beam characteristics in the newly created straight sections are described, including the enlargement of the horizontal beam size due to the nonzero dispersion. Some disadvantages of the scheme are increased operations complexity due to the need for nine new quadrupole families, increased beam emittance (by 14.5% is one sextant is modified), and reduced dynamic aperture. However, the dynamic aperture is still about as large as the physical aperture and should be adequate for good beam lifetime and injection. (orig.)

Steam injection to increase oil recovery

Energy Technology Data Exchange (ETDEWEB)

Leutwyler, K; Bigelow, H L

1966-03-01

Speculation is made as to the possibility that future reserves can be increased with steam energy from the first day of production. Boilers and auxilary equipment for this operation should be designed especially for free air operations. The appropriate treatment of the water used is critical in controlling certain problems. Since this operation has been planned for working at temperatures of approximately 315$C, one of the best downhole units for such an operation is found to be the Retrievable Thermal Seal Packer. Expansion joints solve the problem of temperature inhibiting movement causing permanent corkscrew deformity. Conventional sealing material on the tubing threads is not suitable at high temperatures. A band of Teflon does the job well but its use is unjustified by cost and personnel untrained in its use. However, an excellent sealing material has been developed that fills all requirements. General suggestions for the use of steam injection include the good cementing jobs; treatment of the entire system as an integral unit; use of asbestos to insulate is of doubtful value because of the subsequent problems it causes; starting of the steam injection conservatively allows the cement and tubing to heat together. It is believed that this procedure helps reduce the possibility of vertical fractures in the cement.

Non-injection Drug Use and Injection Initiation Assistance among People Who Inject Drugs in Tijuana, Mexico.

Science.gov (United States)

Ben Hamida, Amen; Rafful, Claudia; Jain, Sonia; Sun, Shelly; Gonzalez-Zuniga, Patricia; Rangel, Gudelia; Strathdee, Steffanie A; Werb, Dan

2018-02-01

Although most people who inject drugs (PWID) report receiving assistance during injection initiation events, little research has focused on risk factors among PWID for providing injection initiation assistance. We therefore sought to determine the influence of non-injection drug use among PWID on their risk to initiate others. We used generalized estimating equation (GEE) models on longitudinal data among a prospective cohort of PWID in Tijuana, Mexico (Proyecto El Cuete IV), while controlling for potential confounders. At baseline, 534 participants provided data on injection initiation assistance. Overall, 14% reported ever initiating others, with 4% reporting this behavior recently (i.e., in the past 6 months). In a multivariable GEE model, recent non-injection drug use was independently associated with providing injection initiation assistance (adjusted odds ratio [AOR] = 2.42, 95% confidence interval [CI] = 1.39-4.20). Further, in subanalyses examining specific drug types, recent non-injection use of cocaine (AOR = 9.31, 95% CI = 3.98-21.78), heroin (AOR = 4.00, 95% CI = 1.88-8.54), and methamphetamine (AOR = 2.03, 95% CI = 1.16-3.55) were all significantly associated with reporting providing injection initiation assistance. Our findings may have important implications for the development of interventional approaches to reduce injection initiation and related harms. Further research is needed to validate findings and inform future approaches to preventing entry into drug injecting.

Multiple imputation by chained equations for systematically and sporadically missing multilevel data.

Science.gov (United States)

Resche-Rigon, Matthieu; White, Ian R

2018-06-01

In multilevel settings such as individual participant data meta-analysis, a variable is 'systematically missing' if it is wholly missing in some clusters and 'sporadically missing' if it is partly missing in some clusters. Previously proposed methods to impute incomplete multilevel data handle either systematically or sporadically missing data, but frequently both patterns are observed. We describe a new multiple imputation by chained equations (MICE) algorithm for multilevel data with arbitrary patterns of systematically and sporadically missing variables. The algorithm is described for multilevel normal data but can easily be extended for other variable types. We first propose two methods for imputing a single incomplete variable: an extension of an existing method and a new two-stage method which conveniently allows for heteroscedastic data. We then discuss the difficulties of imputing missing values in several variables in multilevel data using MICE, and show that even the simplest joint multilevel model implies conditional models which involve cluster means and heteroscedasticity. However, a simulation study finds that the proposed methods can be successfully combined in a multilevel MICE procedure, even when cluster means are not included in the imputation models.

Sorbent Injection for Small ESP Mercury Control in Low Sulfur Eastern Bituminous Coal Flue Gas

Energy Technology Data Exchange (ETDEWEB)

Carl Richardson; Katherine Dombrowski; Douglas Orr

2006-12-31

This project Final Report is submitted to the U.S. Department of Energy (DOE) as part of Cooperative Agreement DE-FC26-03NT41987, 'Sorbent Injection for Small ESP Mercury Control in Low Sulfur Eastern Bituminous Coal Flue Gas.' Sorbent injection technology is targeted as the primary mercury control process on plants burning low/medium sulfur bituminous coals equipped with ESP and ESP/FGD systems. About 70% of the ESPs used in the utility industry have SCAs less than 300 ft2/1000 acfm. Prior to this test program, previous sorbent injection tests had focused on large-SCA ESPs. This DOE-NETL program was designed to generate data to evaluate the performance and economic feasibility of sorbent injection for mercury control at power plants that fire bituminous coal and are configured with small-sized electrostatic precipitators and/or an ESP-flue gas desulfurization (FGD) configuration. EPRI and Southern Company were co-funders for the test program. Southern Company and Reliant Energy provided host sites for testing and technical input to the project. URS Group was the prime contractor to NETL. ADA-ES and Apogee Scientific Inc. were sub-contractors to URS and was responsible for all aspects of the sorbent injection systems design, installation and operation at the different host sites. Full-scale sorbent injection for mercury control was evaluated at three sites: Georgia Power's Plant Yates Units 1 and 2 [Georgia Power is a subsidiary of the Southern Company] and Reliant Energy's Shawville Unit 3. Georgia Power's Plant Yates Unit 1 has an existing small-SCA cold-side ESP followed by a Chiyoda CT-121 wet scrubber. Yates Unit 2 is also equipped with a small-SCA ESP and a dual flue gas conditioning system. Unit 2 has no SO2 control system. Shawville Unit 3 is equipped with two small-SCA cold-side ESPs operated in series. All ESP systems tested in this program had SCAs less than 250 ft2/1000 acfm. Short-term parametric tests were conducted on Yates

Injection, injectivity and injectability in geothermal operations: problems and possible solutions. Phase I. Definition of the problems

Energy Technology Data Exchange (ETDEWEB)

Vetter, O.J.; Crichlow, H.B.

1979-02-14

The following topics are covered: thermodynamic instability of brine, injectivity loss during regular production and injection operations, injectivity loss caused by measures other than regular operations, heat mining and associated reservoir problems in reinjection, pressure maintenance through imported make-up water, suggested solutions to injection problems, and suggested solutions to injection problems: remedial and stimulation measures. (MHR)

Semiconductor Manufacturing equipment introduction

International Nuclear Information System (INIS)

Im, Jong Sun

2001-02-01

This book deals with semiconductor manufacturing equipment. It is comprised of nine chapters, which are manufacturing process of semiconductor device, history of semiconductor manufacturing equipment, kinds and role of semiconductor manufacturing equipment, construction and method of semiconductor manufacturing equipment, introduction of various semiconductor manufacturing equipment, spots of semiconductor manufacturing, technical elements of semiconductor manufacturing equipment, road map of technology of semiconductor manufacturing equipment and semiconductor manufacturing equipment in the 21st century.

Medical surgical nurses describe missed nursing care tasks-Evaluating our work environment.

Science.gov (United States)

Winsett, Rebecca P; Rottet, Kendra; Schmitt, Abby; Wathen, Ellen; Wilson, Debra

2016-11-01

The purpose of the study was to explore the nurse work environment by evaluating the self-report of missed nursing care and the reasons for the missed care. A convenience sample of medical surgical nurses from four hospitals was invited to complete the survey for this descriptive study. The sample included 168 nurses. The MISSCARE survey assessed the frequency and reason of 24 routine nursing care elements. The most frequently reported missed care was ambulation as ordered, medications given within a 30 minute window, and mouth care. Moderate or significant reasons reported for the missed care were: unexpected rise in volume/acuity, heavy admissions/discharges, inadequate assistants, inadequate staff, meds not available when needed, and urgent situations. Identifying missed nursing care and reasons for missed care provides an opportunity for exploring strategies to reduce interruptions, develop unit cohesiveness, improve the nurse work environment, and ultimately leading to improved patient outcomes. Copyright © 2016 Elsevier Inc. All rights reserved.

A regressive methodology for estimating missing data in rainfall daily time series

Science.gov (United States)

Barca, E.; Passarella, G.

2009-04-01

The "presence" of gaps in environmental data time series represents a very common, but extremely critical problem, since it can produce biased results (Rubin, 1976). Missing data plagues almost all surveys. The problem is how to deal with missing data once it has been deemed impossible to recover the actual missing values. Apart from the amount of missing data, another issue which plays an important role in the choice of any recovery approach is the evaluation of "missingness" mechanisms. When data missing is conditioned by some other variable observed in the data set (Schafer, 1997) the mechanism is called MAR (Missing at Random). Otherwise, when the missingness mechanism depends on the actual value of the missing data, it is called NCAR (Not Missing at Random). This last is the most difficult condition to model. In the last decade interest arose in the estimation of missing data by using regression (single imputation). More recently multiple imputation has become also available, which returns a distribution of estimated values (Scheffer, 2002). In this paper an automatic methodology for estimating missing data is presented. In practice, given a gauging station affected by missing data (target station), the methodology checks the randomness of the missing data and classifies the "similarity" between the target station and the other gauging stations spread over the study area. Among different methods useful for defining the similarity degree, whose effectiveness strongly depends on the data distribution, the Spearman correlation coefficient was chosen. Once defined the similarity matrix, a suitable, nonparametric, univariate, and regressive method was applied in order to estimate missing data in the target station: the Theil method (Theil, 1950). Even though the methodology revealed to be rather reliable an improvement of the missing data estimation can be achieved by a generalization. A first possible improvement consists in extending the univariate technique to

Rheological and thermal analysis of the filling stage of injection moulding

Directory of Open Access Journals (Sweden)

A. Szucs

2012-08-01

Full Text Available Flow conditions are different in the cavity of the injection mould from the capillary flow of a laboratory rheological instrument. An injection moulding slit die rheometer (Rheo-mould was designed with a series of slit and orifice dies. Four pressure sensors were built in the stationary side of the mould, therefore the pressure could be measured at four different places. A changeable slit die insert was designed in the moving side. The shear stress and the shear rate can be calculated from the pressure gradient and from the flow rate of the melt, respectively. Flow curves of low density polyethylene were determined using Bagley, Rabinowitsch and Mooney corrections. The results were compared to the flow curves determined by Göttfert and Haake capillary equipments. It was found that the agreement between the methods is excellent.

The control system for SSRF injection and extraction

International Nuclear Information System (INIS)

Yuan Qibing; Gu Ming; Wang Ruiping; Cheng Zhihao; Fan Xuerong; Zhu Haijun

2007-01-01

This paper introduces the injection and extraction control system design for SSRF, which is a distributed control system aimed at stability and reliability of the pulse power supplies, PPS (Personnel Protection System) and MPS (Machine Protection System). The hardware environment is mainly based on PLC (Programmable Logic Controller), and ARM (Advanced RISC Machine) is also applied for studying stability of the power supplies. WinCC and EPICS (Experimental Physics and Industrial Control System) have been selected as the platforms of SCADA (Supervisory Control and Data Acquisition). For unifying the interfacing to the control computer, all front-end equipments are connected via Industrial Ethernet. (authors)

Estimation of Missing Observations in Two-Level Split-Plot Designs

DEFF Research Database (Denmark)

Almimi, Ashraf A.; Kulahci, Murat; Montgomery, Douglas C.

2008-01-01

Inserting estimates for the missing observations from split-plot designs restores their balanced or orthogonal structure and alleviates the difficulties in the statistical analysis. In this article, we extend a method due to Draper and Stoneman to estimate the missing observations from unreplicated...... two-level factorial and fractional factorial split-plot (FSP and FFSP) designs. The missing observations, which can either be from the same whole plot, from different whole plots, or comprise entire whole plots, are estimated by equating to zero a number of specific contrast columns equal...... to the number of the missing observations. These estimates are inserted into the design table and the estimates for the remaining effects (or alias chains of effects as the case with FFSP designs) are plotted on two half-normal plots: one for the whole-plot effects and the other for the subplot effects...

The effect of maternal near miss on adverse infant nutritional outcomes

Directory of Open Access Journals (Sweden)

Dulce M. Zanardi

Full Text Available OBJECTIVES: To evaluate the association between self-reported maternal near miss and adverse nutritional status in children under one year of age. METHODS: This study is a secondary analysis of a study in which women who took their children under one year of age to the national vaccine campaign were interviewed. The self-reported condition of maternal near miss used the criteria of Intensive Care Unit admission; eclampsia; blood transfusion and hysterectomy; and their potential associations with any type of nutritional disorder in children, including deficits in weight-for-age, deficits in height-for-age, obesity and breastfeeding. The rates of near miss for the country, regions and states were initially estimated. The relative risks of infant adverse nutritional status according to near miss and maternal/childbirth characteristics were estimated with their 95% CIs using bivariate and multiple analyses. RESULTS: The overall prevalence of near miss was 2.9% and was slightly higher for the Legal Amazon than for other regions. No significant associations were found with nutritional disorders in children. Only a 12% decrease in overall maternal breastfeeding was associated with near miss. Living in the countryside and child over 6 months of age increased the risk of altered nutritional status by approximately 15%, while female child gender decreased this risk by 30%. Maternal near miss was not associated with an increased risk of any alteration in infant nutritional status. CONCLUSIONS: There was no association between maternal near miss and altered nutritional status in children up to one year of age. The risk of infant adverse nutritional status was greater in women living in the countryside, for children over 6 months of age and for male gender.

"Near-miss" obstetric events and maternal deaths in Sagamu, Nigeria: a retrospective study

Directory of Open Access Journals (Sweden)

Daniel Olusoji J

2005-11-01

Full Text Available Abstract Aim To determine the frequency of near-miss (severe acute maternal morbidity and the nature of near-miss events, and comparatively analysed near-miss morbidities and maternal deaths among pregnant women managed over a 3-year period in a Nigerian tertiary centre. Methods Retrospective facility-based review of cases of near-miss and maternal death which occurred between 1 January 2002 and 31 December 2004. Near-miss case definition was based on validated disease-specific criteria, comprising of five diagnostic categories: haemorrhage, hypertensive disorders in pregnancy, dystocia, infection and anaemia. The near-miss morbidities were compared with maternal deaths with respect to demographic features and disease profiles. Mortality indices were determined for various disease processes to appreciate the standard of care provided for life-threatening obstetric conditions. The maternal death to near-miss ratios for the three years were compared to assess the trend in the quality of obstetric care. Results There were 1501 deliveries, 211 near-miss cases and 44 maternal deaths. The total near-miss events were 242 with a decreasing trend from 2002 to 2004. Demographic features of cases of near-miss and maternal death were comparable. Besides infectious morbidity, the categories of complications responsible for near-misses and maternal deaths followed the same order of decreasing frequency. Hypertensive disorders in pregnancy and haemorrhage were responsible for 61.1% of near-miss cases and 50.0% of maternal deaths. More women died after developing severe morbidity due to uterine rupture and infection, with mortality indices of 37.5% and 28.6%, respectively. Early pregnancy complications and antepartum haemorrhage had the lowest mortality indices. Majority of the cases of near-miss (82.5% and maternal death (88.6% were unbooked for antenatal care and delivery in this hospital. Maternal mortality ratio for the period was 2931.4 per 100

NRC Information No. 89-86: Type HK circuit breakers missing close latch anti-shock springs

International Nuclear Information System (INIS)

Rossi, C.E.

1992-01-01

During the recent refueling outage at Fermi Unit 2, the licensee inspected both safety-related and non-safety-related Type HK circuit breakers. The close latch anti-shock springs were observed to be missing in approximately 40 safety-related Type HK circuit breakers that had been manufactured outside of the previously identified timeframes. (The identified circuit breakers were manufactured in 1974.) Thus, the timeframes previously identified by the manufacturer (prior to 1973 and from June 1975 to June 1977) may not be totally inclusive. In addition, because of changes in corporate name, mergers, etc., Type HK circuit breakers may indicate manufacture by ITE, ITE Imperial, Gould, Brown Boveri, or a combination thereof. The current name of the manufacturer is ASEA Brown Boveri. Recipients may need to be cognizant of this when determining whether they utilize potentially affected equipment

The oil and gas equipment and services market in Nigeria

International Nuclear Information System (INIS)

2003-01-01

The oil and gas market in Nigeria is being expanded by the Nigerian government over the 2003-2010 period through increased exploration and production (E and P) in new areas. Other measures being implemented are the improvements of structural flaws that hamper industry growth, the modernization of the weak downstream sector, and attempts to attract foreign investment and technologies required for petroleum development. In 2001, it was estimated that the market for oil and gas equipment in Nigeria was approximately 1.03 billion dollars, and is expected to reach 1.15 billion dollars in 2002. In deep-sea areas, major offshore E and P projects are being planned by large oil multinationals. The implementation of several gas-related E and P operations and major liquefied natural gas (LNG) and gas-to-liquid (GTL) projects are being supported by the government of Nigeria to develop the natural gas sector. Onshore and offshore exploration, surveying and geophysical prospecting, drilling equipment, facilities maintenance, deepwater E and P, equipment for LNG/GTL facilities, enhanced recovery equipment and services, gas re-injection technology, pipelines, and the refinery sector are all areas where Canadian equipment and service suppliers could benefit from opportunities in Nigeria. One of the most prominent foreign player in the Nigerian market is Royal Dutch Shell. As far as the offshore deepwater E and P sub-sector, the three major players are Shell, ChevronTexaco, and ExxonMobil. The Nigerian government advocate in upstream and downstream oil industries in the country is Nigeria National Petroleum Corporation (NNPC). The primary domestic end-users of oil and gas equipment and services are member companies of the Nigerian Association of Indigenous Petroleum Exploration Companies (NAIPEC). Canadian companies are encouraged to form joint venture partnerships in oil and gas projects, as foreign majors operating in Nigeria tend to rely on the skills and expertise of foreign

Statistical analysis with missing exposure data measured by proxy respondents: a misclassification problem within a missing-data problem.

Science.gov (United States)

Shardell, Michelle; Hicks, Gregory E

2014-11-10

In studies of older adults, researchers often recruit proxy respondents, such as relatives or caregivers, when study participants cannot provide self-reports (e.g., because of illness). Proxies are usually only sought to report on behalf of participants with missing self-reports; thus, either a participant self-report or proxy report, but not both, is available for each participant. Furthermore, the missing-data mechanism for participant self-reports is not identifiable and may be nonignorable. When exposures are binary and participant self-reports are conceptualized as the gold standard, substituting error-prone proxy reports for missing participant self-reports may produce biased estimates of outcome means. Researchers can handle this data structure by treating the problem as one of misclassification within the stratum of participants with missing self-reports. Most methods for addressing exposure misclassification require validation data, replicate data, or an assumption of nondifferential misclassification; other methods may result in an exposure misclassification model that is incompatible with the analysis model. We propose a model that makes none of the aforementioned requirements and still preserves model compatibility. Two user-specified tuning parameters encode the exposure misclassification model. Two proposed approaches estimate outcome means standardized for (potentially) high-dimensional covariates using multiple imputation followed by propensity score methods. The first method is parametric and uses maximum likelihood to estimate the exposure misclassification model (i.e., the imputation model) and the propensity score model (i.e., the analysis model); the second method is nonparametric and uses boosted classification and regression trees to estimate both models. We apply both methods to a study of elderly hip fracture patients. Copyright © 2014 John Wiley & Sons, Ltd.

Missed losses loom larger than missed gains: Electrodermal reactivity to decision choices and outcomes in a gambling task.

Science.gov (United States)

Wu, Yin; Van Dijk, Eric; Aitken, Mike; Clark, Luke

2016-04-01

Loss aversion is a defining characteristic of prospect theory, whereby responses are stronger to losses than to equivalently sized gains (Kahneman & Tversky Econometrica, 47, 263-291, 1979). By monitoring electrodermal activity (EDA) during a gambling task, in this study we examined physiological activity during risky decisions, as well as to both obtained (e.g., gains and losses) and counterfactual (e.g., narrowly missed gains and losses) outcomes. During the bet selection phase, EDA increased linearly with bet size, highlighting the role of somatic signals in decision-making under uncertainty in a task without any learning requirement. Outcome-related EDA scaled with the magnitudes of monetary wins and losses, and losses had a stronger impact on EDA than did equivalently sized wins. Narrowly missed wins (i.e., near-wins) and narrowly missed losses (i.e., near-losses) also evoked EDA responses, and the change of EDA as a function of the size of the missed outcome was modestly greater for near-losses than for near-wins, suggesting that near-losses have more impact on subjective value than do near-wins. Across individuals, the slope for choice-related EDA (as a function of bet size) correlated with the slope for outcome-related EDA as a function of both the obtained and counterfactual outcome magnitudes, and these correlations were stronger for loss and near-loss conditions than for win and near-win conditions. Taken together, these asymmetrical EDA patterns to objective wins and losses, as well as to near-wins and near-losses, provide a psychophysiological instantiation of the value function curve in prospect theory, which is steeper in the negative than in the positive domain.

Electrical equipment qualification

International Nuclear Information System (INIS)

Farmer, W.S.

1983-01-01

Electrical equipment qualification research programs being carried out by CEA, JAERI, and Sandia Laboratories are discussed. Objectives of the program are: (1) assessment of accident simulation methods for electrical equipment qualification testing; lower coarse (2) evaluation of equipment aging and accelerated aging methods; (3) determine radiation dose spectrum to electrical equipment and assess simulation methods for qualification; (4) identify inadequacies in electrical equipment qualification procedures and standards and potential failure modes; and (5) provide data for verifying and improving standards, rules and regulatory guides

[Missed lessons, missed opportunities: a role for public health services in medical absenteeism in young people].

Science.gov (United States)

Vanneste, Y T M; van de Goor, L A M; Feron, F J M

2016-01-01

Young people who often miss school for health reasons are not only missing education, but also the daily routine of school, and social intercourse with their classmates. Medical absenteeism among students merits greater attention. For a number of years, in various regions in the Netherlands, students with extensive medical absenteeism have been invited to see a youth healthcare specialist. The MASS intervention (Medical Advice of Students reported Sick; in Dutch: Medische Advisering van de Ziekgemelde Leerling, abbreviated as M@ZL) has been developed by the West Brabant Regional Public Health Service together with secondary schools to address school absenteeism due to reporting sick. In this paper we discuss the MASS intervention and explain why attention should be paid by public health services to the problem of school absenteeism, especially absenteeism on health grounds.

Testosterone Injection

Science.gov (United States)

... typical male characteristics. Testosterone injection works by supplying synthetic testosterone to replace the testosterone that is normally ... as a pellet to be injected under the skin.Testosterone injection may control your symptoms but will ...

Injection septa position and angle optimisation in view of the 2 GeV liu upgrade of the CERN PS

CERN Document Server

Serluca, HM; Forte, V; Fraser, M; Sterbini, G

2017-01-01

In the framework of the LHC Injector Upgrade (LIU)project the CERN PS injection kinetic energy will be up-graded from 1.4 to 2 GeV. The injection equipment, whichis already operating close to its limit, is being redesigned tocope with 30% increase in the beam rigidity. In this paper wepresent the experimental results from Machine Development(MD) studies on the present septum to explore its operationalhardware limits with respect to aperture restrictions, beamlosses and kick strengths in view of the LIU upgrade

Space Heating Equipment

Energy Technology Data Exchange (ETDEWEB)

Rafferty, Kevin D.

1998-01-01

The performance evaluation of space heating equipment for a geothermal application is generally considered from either of two perspectives: (a) selecting equipment for installation in new construction, or (b) evaluating the performance and retrofit requirements of an existing system. With regard to new construction, the procedure is relatively straightforward. Once the heating requirements are determined, the process need only involve the selection of appropriately sized hot water heating equipment based on the available water temperature. It is important to remember that space heating equipment for geothermal applications is the same equipment used in non-geothermal applications. What makes geothermal applications unique is that the equipment is generally applied at temperatures and flow rates that depart significantly from traditional heating system design. This chapter presents general considerations for the performance of heating equipment at non-standard temperature and flow conditions, retrofit of existing systems, and aspects of domestic hot water heating.

Inroads into Equestrian Safety: Rider-Reported Factors Contributing to Horse-Related Accidents and Near Misses on Australian Roads

Directory of Open Access Journals (Sweden)

Kirrilly Thompson

2015-07-01

Full Text Available Horse riding and horse-related interactions are inherently dangerous. When they occur on public roads, the risk profile of equestrian activities is complicated by interactions with other road users. Research has identified speed, proximity, visibility, conspicuity and mutual misunderstanding as factors contributing to accidents and near misses. However, little is known about their significance or incidence in Australia. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52% reported having experienced at least one accident or near miss in the 12 months prior to the survey. Whilst our findings confirm the factors identified overseas, we also identified issues around rider misunderstanding of road rules and driver misunderstanding of rider hand signals. Of particular concern, we also found reports of potentially dangerous rider-directed road rage. We identify several areas for potential safety intervention including (1 identifying equestrians as vulnerable road users and horses as sentient decision-making vehicles (2 harmonising laws regarding passing horses, (3 mandating personal protective equipment, (4 improving road signage, (5 comprehensive data collection, (6 developing mutual understanding amongst road-users, (7 safer road design and alternative riding spaces; and (8 increasing investment in horse-related safety initiatives.

Inroads into Equestrian Safety: Rider-Reported Factors Contributing to Horse-Related Accidents and Near Misses on Australian Roads.

Science.gov (United States)

Thompson, Kirrilly; Matthews, Chelsea

2015-07-22

Horse riding and horse-related interactions are inherently dangerous. When they occur on public roads, the risk profile of equestrian activities is complicated by interactions with other road users. Research has identified speed, proximity, visibility, conspicuity and mutual misunderstanding as factors contributing to accidents and near misses. However, little is known about their significance or incidence in Australia. To explore road safety issues amongst Australian equestrians, we conducted an online survey. More than half of all riders (52%) reported having experienced at least one accident or near miss in the 12 months prior to the survey. Whilst our findings confirm the factors identified overseas, we also identified issues around rider misunderstanding of road rules and driver misunderstanding of rider hand signals. Of particular concern, we also found reports of potentially dangerous rider-directed road rage. We identify several areas for potential safety intervention including (1) identifying equestrians as vulnerable road users and horses as sentient decision-making vehicles (2) harmonising laws regarding passing horses, (3) mandating personal protective equipment, (4) improving road signage, (5) comprehensive data collection, (6) developing mutual understanding amongst road-users, (7) safer road design and alternative riding spaces; and (8) increasing investment in horse-related safety initiatives.

Admissions of injection drug users to drug abuse treatment following HIV counseling and testing.

Science.gov (United States)

McCusker, J; Willis, G; McDonald, M; Lewis, B F; Sereti, S M; Feldman, Z T

1994-01-01

The outcomes of counseling and testing programs related to human immunodeficiency virus (HIV) infection and risk of infection among injection drug users (IDUs) are not well known or understood. A counseling and testing outcome of potential public health importance is attaining admission to drug abuse treatment by those IDUs who are either infected or who are at high risk of becoming infected. The authors investigated factors related to admission to drug abuse treatment among 519 IDUs who received HIV counseling and testing from September 1987 through December 1990 at a men's prison and at community-based testing sites in Worcester, MA. By June 1991, 123 of the 519 IDUs (24 percent) had been admitted to treatment. Variables associated with their admission included a long history of drug injection, frequent recent drug injection, cleaning injection equipment using bleach, prior drug treatment, and a positive HIV test result. Logistic regression analyses, controlling for effects of recruitment site, year, sex, and area of residence, generally confirmed the associations. IDUs in the study population who were HIV-infected sought treatment or were admitted to treatment more frequently than those who were not infected. The results indicate that access to drug abuse treatment should be facilitated for high-risk IDUs and for those who have begun to inject drugs recently.

Rapid and Low-cost Prototyping of Medical Devices Using 3D Printed Molds for Liquid Injection Molding

Science.gov (United States)

Chung, Philip; Heller, J. Alex; Etemadi, Mozziyar; Ottoson, Paige E.; Liu, Jonathan A.; Rand, Larry; Roy, Shuvo

2014-01-01

Biologically inert elastomers such as silicone are favorable materials for medical device fabrication, but forming and curing these elastomers using traditional liquid injection molding processes can be an expensive process due to tooling and equipment costs. As a result, it has traditionally been impractical to use liquid injection molding for low-cost, rapid prototyping applications. We have devised a method for rapid and low-cost production of liquid elastomer injection molded devices that utilizes fused deposition modeling 3D printers for mold design and a modified desiccator as an injection system. Low costs and rapid turnaround time in this technique lower the barrier to iteratively designing and prototyping complex elastomer devices. Furthermore, CAD models developed in this process can be later adapted for metal mold tooling design, enabling an easy transition to a traditional injection molding process. We have used this technique to manufacture intravaginal probes involving complex geometries, as well as overmolding over metal parts, using tools commonly available within an academic research laboratory. However, this technique can be easily adapted to create liquid injection molded devices for many other applications. PMID:24998993

Estimating range of influence in case of missing spatial data

DEFF Research Database (Denmark)

Bihrmann, Kristine; Ersbøll, Annette Kjær

2015-01-01

BACKGROUND: The range of influence refers to the average distance between locations at which the observed outcome is no longer correlated. In many studies, missing data occur and a popular tool for handling missing data is multiple imputation. The objective of this study was to investigate how...... the estimated range of influence is affected when 1) the outcome is only observed at some of a given set of locations, and 2) multiple imputation is used to impute the outcome at the non-observed locations. METHODS: The study was based on the simulation of missing outcomes in a complete data set. The range...... of influence was estimated from a logistic regression model with a spatially structured random effect, modelled by a Gaussian field. Results were evaluated by comparing estimates obtained from complete, missing, and imputed data. RESULTS: In most simulation scenarios, the range estimates were consistent...

Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling

International Nuclear Information System (INIS)

Martinho, Graça; Pires, Ana; Saraiva, Luanha; Ribeiro, Rita

2012-01-01

Highlights: ► The article shows WEEE plastics characterization from a recycling unit in Portugal. ► The recycling unit has low machinery, with hand sorting of plastics elements. ► Most common polymers are PS, ABS, PC/ABS, HIPS and PP. ► Most plastics found have no identification of plastic type or flame retardants. ► Ecodesign is still not practiced for EEE, with repercussions in end of life stage. - Abstract: This paper describes a direct analysis study carried out in a recycling unit for waste electrical and electronic equipment (WEEE) in Portugal to characterize the plastic constituents of WEEE. Approximately 3400 items, including cooling appliances, small WEEE, printers, copying equipment, central processing units, cathode ray tube (CRT) monitors and CRT televisions were characterized, with the analysis finding around 6000 kg of plastics with several polymer types. The most common polymers are polystyrene, acrylonitrile–butadiene–styrene, polycarbonate blends, high-impact polystyrene and polypropylene. Additives to darken color are common contaminants in these plastics when used in CRT televisions and small WEEE. These additives can make plastic identification difficult, along with missing polymer identification and flame retardant identification marks. These drawbacks contribute to the inefficiency of manual dismantling of WEEE, which is the typical recycling process in Portugal. The information found here can be used to set a baseline for the plastics recycling industry and provide information for ecodesign in electrical and electronic equipment production.

The Strengths and Limitations of South Africa's Search for Apartheid-Era Missing Persons.

Science.gov (United States)

Aronson, Jay D

2011-07-01

This article examines efforts to account for missing persons from the apartheid era in South Africa by family members, civil society organizations and the current government's Missing Persons Task Team, which emerged out of the Truth and Reconciliation Commission process. It focuses on how missing persons have been officially defined in the South African context and the extent to which the South African government is able to address the current needs and desires of relatives of the missing. I make two main arguments: that family members ought to have an active role in shaping the initiatives and institutions that seek to resolve the fate of missing people, and that the South African government ought to take a more holistic 'grave-to-grave' approach to the process of identifying, returning and reburying the remains of the missing.

Extension of Surveillance Test Interval of Safety Injection Pump for APR-1400 Reactors to Improve Reliability and Availability of the Pump

Energy Technology Data Exchange (ETDEWEB)

Osama, A. Rezk; Jung, J. C.; Lee, Yong-Kwan [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2015-10-15

The safety features function to localize, control, mitigate, and terminate such incidents and to hold exposure levels below applicable limits. The safety injection system is comprised of four independent mechanical trains without any tie line among the injection paths and two electrical divisions. Each train has one active Safety Injection Pump (SIP) and one passive Safety Injection Tank (SIT) equipped with a Fluidic Device (FD), each train provides 50% of the minimum injection flow rate for breaks larger than the size of a direct vessel injection line. For breaks equal to or smaller than the size of a direct vessel injection line, each train has 100% of the required capacity. The low pressure injection pumps with common header installed in the conventional design are eliminated, and the functions for safety injection and shutdown cooling are separated. The arrangement of safety injection system for APR-1400 as shown in figure (1). The results obtained in this work show that STI extensions for the SIS feasible without any unacceptable increase in the plant total risk, STI extensions are acceptable for safety injection system to provide plant operational flexibility in the performance of both corrective and preventive maintenance for the safety injection system.

Barriers to obstetric care among maternal near-misses | Soma-Pillay ...

African Journals Online (AJOL)

One hundred maternal near-misses were prospectively identified using the World Health Organization criteria. ... The above causes were also the most important factors causing delays for the leading causes of maternal near-misses – obstetric haemorrhage, hypertension/pre-eclampsia, and medical and surgical conditions.

Missed Radiation Therapy and Cancer Recurrence

Science.gov (United States)

Patients who miss radiation therapy sessions during cancer treatment have an increased risk of their disease returning, even if they eventually complete their course of radiation treatment, according to a new study.

Diabetes or hypertension as risk indicators for missing teeth ...

African Journals Online (AJOL)

A negative binomial regression (NBR) model was generated. Results: Mean age was 50.7 ± 16.2 and 50.0% were women. Mean number of missing teeth was 4.98 ± 4.17. In the multivariate NBR model, we observed that individuals with T2DM had higher risk of more missing teeth (incidence rate ratios [IRRs] = 3.13; 95% ...

Quantification of glibenclamide in cleaning samples of pharmaceutical equipment through high performance liquid chromatography

International Nuclear Information System (INIS)

Baeza Fonte, Alen Nils; Diaz Aguila, Elsa Eneida; Martinez Alfonso; Nancy

2012-01-01

to submit a selective analytical method for quantization of glibenclamide in cleaning samples of pharmaceutical equipment using high performance liquid chromatography. The mobile phase consisted of an equal mixing of acetonitrile/phosphate buffer KH 2 PO 4 ; with 0.037 mol/L concentration pH 5.25 and flow of 1.5 mL/min, in a Nucleosil 100 C8 column. Glibenclamide was injected with progesterone as internal standard and using an UV detector= 230 nm

Fabrication of Bonding-Type Hollow Microneedle Array by Injection Molding and Evaluation of its Puncture Characteristics

Science.gov (United States)

Ogai, Noriyuki; Sugimura, Ryo; Tamaru, Takuya; Takiguchi, Yoshihiro

A microneedle array which consists from small needles compared to a conventional metal injection needle is expected as a low invasive transdermal medical treatment device, and many fabrication approach have been conducted. In this study, we fabricated plastic hollow microneedle array by a fabrication method based on the combination of injection molding, bonding and assembly techniques. To evaluate puncture characteristics of the fabricated needle, we measured a puncture force to silicone rubber by experimental equipment using loadcell and automatic stage. Furthermore, we propose and demonstrate a new method to measure actual punctured depth from punctured trace on the needle surface modified by O2 plasma treatment.

Risk factors for HIV infection in injection drug users and evidence for onward transmission of HIV to their sexual partners in Chennai, India.

Science.gov (United States)

Panda, Samiran; Kumar, M Suresh; Lokabiraman, S; Jayashree, K; Satagopan, M C; Solomon, Suniti; Rao, Usha Anand; Rangaiyan, Gurumurthy; Flessenkaemper, Sabine; Grosskurth, Heiner; Gupte, Mohan D

2005-05-01

Determining HIV prevalence in injection drug users (IDUs) and their regular sex partners in Chennai, India. A total of 226 IDUs and their regular sex partners were enrolled during April-July 2003. After informed consent was obtained, a semistructured questionnaire was administered and serum was tested for HIV antibody. The HIV seroprevalence was 30% (68/226) in IDUs and 5% in their regular sex partners (11/226). While in 25% of couples only the male partner was HIV positive, 5% of the couples were concordant for HIV infection and 70% were HIV negative. Fifty-seven percent of the HIV-positive IDUs and 45% of the HIV-infected women thought that they had "no chance" or "very little chance" of getting HIV, reflecting low HIV risk perception. More than 20% IDUs reported borrowing or lending of injection equipment. In univariate analyses "sex" and "condom use" with sex workers had no bearing but "more than twice a day injecting frequency," "history of incarceration," "tattoos," "recruitment from northern part of the city," and ever-injecting drugs in drug-selling places had significant association with HIV infection in IDUs. In an adjusted model, the odds of HIV infection were 2 times higher among IDUs who had ever injected drugs in drug-selling places and 6 times higher in those who were recruited from the northern part of central Chennai. Reducing sharing of injection equipment and unsafe tattooing through targeted and environmental interventions, increasing HIV risk perception, and promoting safer sex practices among IDUs and their sex partners are urgent program needs.

CBRid4SQL: A CBR Intrusion Detector for SQL Injection Attacks

Science.gov (United States)

Pinzón, Cristian; Herrero, Álvaro; de Paz, Juan F.; Corchado, Emilio; Bajo, Javier

One of the most serious security threats to recently deployed databases has been the SQL Injection attack. This paper presents an agent specialised in the detection of SQL injection attacks. The agent incorporates a Case-Based Reasoning engine which is equipped with a learning and adaptation capacity for the classification of malicious codes. The agent also incorporates advanced algorithms in the reasoning cycle stages. The reuse phase uses an innovative classification model based on a mixture of a neuronal network together with a Support Vector Machine in order to classify the received SQL queries in the most reliable way. Finally, a visualisation neural technique is incorporated, which notably eases the revision stage carried out by human experts in the case of suspicious queries. The Classifier Agent was tested in a real-traffic case study and its experimental results, which validate the performance of the proposed approach, are presented here.

Optimization of throughput in semipreparative chiral liquid chromatography using stacked injection.

Science.gov (United States)

Taheri, Mohammadreza; Fotovati, Mohsen; Hosseini, Seyed-Kiumars; Ghassempour, Alireza

2017-10-01

An interesting mode of chromatography for preparation of pure enantiomers from pure samples is the method of stacked injection as a pseudocontinuous procedure. Maximum throughput and minimal production costs can be achieved by the use of total chiral column length in this mode of chromatography. To maximize sample loading, often touching bands of the two enantiomers is automatically achieved. Conventional equations show direct correlation between touching-band loadability and the selectivity factor of two enantiomers. The important question for one who wants to obtain the highest throughput is "How to optimize different factors including selectivity, resolution, run time, and loading of the sample in order to save time without missing the touching-band resolution?" To answer this question, tramadol and propranolol were separated on cellulose 3,5-dimethyl phenyl carbamate, as two pure racemic mixtures with low and high solubilities in mobile phase, respectively. The mobile phase composition consisted of n-hexane solvent with alcohol modifier and diethylamine as the additive. A response surface methodology based on central composite design was used to optimize separation factors against the main responses. According to the stacked injection properties, two processes were investigated for maximizing throughput: one with a poorly soluble and another with a highly soluble racemic mixture. For each case, different optimization possibilities were inspected. It was revealed that resolution is a crucial response for separations of this kind. Peak area and run time are two critical parameters in optimization of stacked injection for binary mixtures which have low solubility in the mobile phase. © 2017 Wiley Periodicals, Inc.

Missing Boxes in Central Europe

DEFF Research Database (Denmark)

Prockl, Günter; Weibrecht Kristensen, Kirsten

2015-01-01

The Chinese New Year is an event that obviously happens every year. Every year however it also causes severe problems for the companies involved in the industry in form of missing containers throughout the chain but in particular in the European Hinterland. Illustrated on the symptoms of the Chin...

Exploratory Factor Analysis With Small Samples and Missing Data.

Science.gov (United States)

McNeish, Daniel

2017-01-01

Exploratory factor analysis (EFA) is an extremely popular method for determining the underlying factor structure for a set of variables. Due to its exploratory nature, EFA is notorious for being conducted with small sample sizes, and recent reviews of psychological research have reported that between 40% and 60% of applied studies have 200 or fewer observations. Recent methodological studies have addressed small size requirements for EFA models; however, these models have only considered complete data, which are the exception rather than the rule in psychology. Furthermore, the extant literature on missing data techniques with small samples is scant, and nearly all existing studies focus on topics that are not of primary interest to EFA models. Therefore, this article presents a simulation to assess the performance of various missing data techniques for EFA models with both small samples and missing data. Results show that deletion methods do not extract the proper number of factors and estimate the factor loadings with severe bias, even when data are missing completely at random. Predictive mean matching is the best method overall when considering extracting the correct number of factors and estimating factor loadings without bias, although 2-stage estimation was a close second.

Implicit Valuation of the Near-Miss is Dependent on Outcome Context.

Science.gov (United States)

Banks, Parker J; Tata, Matthew S; Bennett, Patrick J; Sekuler, Allison B; Gruber, Aaron J

2018-03-01

Gambling studies have described a "near-miss effect" wherein the experience of almost winning increases gambling persistence. The near-miss has been proposed to inflate the value of preceding actions through its perceptual similarity to wins. We demonstrate here, however, that it acts as a conditioned stimulus to positively or negatively influence valuation, dependent on reward expectation and cognitive engagement. When subjects are asked to choose between two simulated slot machines, near-misses increase valuation of machines with a low payout rate, whereas they decrease valuation of high payout machines. This contextual effect impairs decisions and persists regardless of manipulations to outcome feedback or financial incentive provided for good performance. It is consistent with proposals that near-misses cause frustration when wins are expected, and we propose that it increases choice stochasticity and overrides avoidance of low-valued options. Intriguingly, the near-miss effect disappears when subjects are required to explicitly value machines by placing bets, rather than choosing between them. We propose that this task increases cognitive engagement and recruits participation of brain regions involved in cognitive processing, causing inhibition of otherwise dominant systems of decision-making. Our results reveal that only implicit, rather than explicit strategies of decision-making are affected by near-misses, and that the brain can fluidly shift between these strategies according to task demands.

Airline Safety Improvement Through Experience with Near-Misses: A Cautionary Tale.

Science.gov (United States)

Madsen, Peter; Dillon, Robin L; Tinsley, Catherine H

2016-05-01

In recent years, the U.S. commercial airline industry has achieved unprecedented levels of safety, with the statistical risk associated with U.S. commercial aviation falling to 0.003 fatalities per 100 million passengers. But decades of research on organizational learning show that success often breeds complacency and failure inspires improvement. With accidents as rare events, can the airline industry continue safety advancements? This question is complicated by the complex system in which the industry operates where chance combinations of multiple factors contribute to what are largely probabilistic (rather than deterministic) outcomes. Thus, some apparent successes are realized because of good fortune rather than good processes, and this research intends to bring attention to these events, the near-misses. The processes that create these near-misses could pose a threat if multiple contributing factors combine in adverse ways without the intervention of good fortune. Yet, near-misses (if recognized as such) can, theoretically, offer a mechanism for continuing safety improvements, above and beyond learning gleaned from observable failure. We test whether or not this learning is apparent in the airline industry. Using data from 1990 to 2007, fixed effects Poisson regressions show that airlines learn from accidents (their own and others), and from one category of near-misses-those where the possible dangers are salient. Unfortunately, airlines do not improve following near-miss incidents when the focal event has no clear warnings of significant danger. Therefore, while airlines need to and can learn from certain near-misses, we conclude with recommendations for improving airline learning from all near-misses. © 2015 Society for Risk Analysis.

Restoring method for missing data of spatial structural stress monitoring based on correlation

Science.gov (United States)

Zhang, Zeyu; Luo, Yaozhi

2017-07-01

Long-term monitoring of spatial structures is of great importance for the full understanding of their performance and safety. The missing part of the monitoring data link will affect the data analysis and safety assessment of the structure. Based on the long-term monitoring data of the steel structure of the Hangzhou Olympic Center Stadium, the correlation between the stress change of the measuring points is studied, and an interpolation method of the missing stress data is proposed. Stress data of correlated measuring points are selected in the 3 months of the season when missing data is required for fitting correlation. Data of daytime and nighttime are fitted separately for interpolation. For a simple linear regression when single point's correlation coefficient is 0.9 or more, the average error of interpolation is about 5%. For multiple linear regression, the interpolation accuracy is not significantly increased after the number of correlated points is more than 6. Stress baseline value of construction step should be calculated before interpolating missing data in the construction stage, and the average error is within 10%. The interpolation error of continuous missing data is slightly larger than that of the discrete missing data. The data missing rate of this method should better not exceed 30%. Finally, a measuring point's missing monitoring data is restored to verify the validity of the method.

The handling of missing binary data in language research

Directory of Open Access Journals (Sweden)

François Pichette

2015-01-01

Full Text Available Researchers are frequently confronted with unanswered questions or items on their questionnaires and tests, due to factors such as item difficulty, lack of testing time, or participant distraction. This paper first presents results from a poll confirming previous claims (Rietveld & van Hout, 2006; Schafer & Gra- ham, 2002 that data replacement and deletion methods are common in research. Language researchers declared that when faced with missing answers of the yes/no type (that translate into zero or one in data tables, the three most common solutions they adopt are to exclude the participant’s data from the analyses, to leave the square empty, or to fill in with zero, as for an incorrect answer. This study then examines the impact on Cronbach’s α of five types of data insertion, using simulated and actual data with various numbers of participants and missing percentages. Our analyses indicate that the three most common methods we identified among language researchers are the ones with the greatest impact  n Cronbach's α coefficients; in other words, they are the least desirable solutions to the missing data problem. On the basis of our results, we make recommendations for language researchers concerning the best way to deal with missing data. Given that none of the most common simple methods works properly, we suggest that the missing data be replaced either by the item’s mean or by the participants’ overall mean to provide a better, more accurate image of the instrument’s internal consistency.

Missed injuries in the era of the trauma scan.

Science.gov (United States)

Lawson, Christy M; Daley, Brian J; Ormsby, Christine B; Enderson, Blaine

2011-02-01

A rapid computed tomography technique or "trauma scan" (TS) provides high-resolution studies of the head, cervical spine, chest, abdomen, and pelvis. We sought to determine whether TS has decreased missed injuries. A previous study of TS found a 3% missed rate. After institutional review board approval, trauma patients from January 2001 through December 2008 were reviewed for delayed diagnosis (DD) of injury to the head, cervical spine, chest, abdomen, or pelvis. Missed extremity injuries were excluded. Injury Severity Score, length of stay, type of injury, outcomes, and days to detection were captured. Of 26,264 patients reviewed, 90 patients had DD, with an incidence of 0.34%. DD most commonly presented on day 2. Injuries included 16 bowel/mesentery, 12 spine, 11 pelvic, 8 spleen, 6 diaphragm, 5 clavicle, 4 scapula, 4 cervical spine, 4 intracranial, 4 sternum, 3 maxillofacial, 3 liver, 2 heart/aorta, 2 vascular, 2 urethra/bladder, 2 pneumothorax, and 2 pancreas/common bile duct. DD resulted in 1 death, 6 prolonged intensive care unit stays, 19 operative interventions, and 38 additional interventions. TS is an effective way of evaluating trauma patients for intracranial, cervical spine, chest, abdomen, and pelvic injuries that have the potential to impact morbidity and mortality. The incidence of injuries missed in these crucial areas has been reduced at our institution by the use of this radiographic modality. The most common missed injury remains bowel, and so a high index of suspicion and the tertiary survey must remain a mainstay of therapy.

Neural control systems for alternatively fuelled vehicles and natural gas fuel injection for DACIA NOVA

Energy Technology Data Exchange (ETDEWEB)

Sulatisky, M. [Saskatchewan Research Council, Saskatoon, SK (Canada); Ghelesel, A. [BC Gas International, Vancouver, BC (Canada)

1999-07-01

The elements of natural gas vehicle conversion technology are described as background to a discussion of the development of bi-fuel injection system for the Rumanian-manufactured DACIA-NOVA automobile. The bi-fuel injection system mirrors the fueling system installed by the original equipment manufacturer; it can also be easily installed on Ford, General Motors and DaimlerChrysler vehicles as well as on most imports.To meet emission standards after 2000, it is envisaged to install on the DACIA NOVA a neural control system (NCS) and a completely adaptive linear control system (ACLS). Details of natural gas vehicles development and the development of NCS and ACLS are discussed, including short-term and long-term objectives.

Simulation and Validation of Injection-Compression Filling Stage of Liquid Moulding with Fast Curing Resins

Science.gov (United States)

Martin, Ffion A.; Warrior, Nicholas A.; Simacek, Pavel; Advani, Suresh; Hughes, Adrian; Darlington, Roger; Senan, Eissa

2018-03-01

Very short manufacture cycle times are required if continuous carbon fibre and epoxy composite components are to be economically viable solutions for high volume composite production for the automotive industry. Here, a manufacturing process variant of resin transfer moulding (RTM), targets a reduction of in-mould manufacture time by reducing the time to inject and cure components. The process involves two stages; resin injection followed by compression. A flow simulation methodology using an RTM solver for the process has been developed. This paper compares the simulation prediction to experiments performed using industrial equipment. The issues encountered during the manufacturing are included in the simulation and their sensitivity to the process is explored.

Investigator's Guide to Missing Child Cases. For Law-Enforcement Officers Locating Missing Children. Second Edition.

Science.gov (United States)

Patterson, John C.

This booklet provides guidance to law enforcement officers investigating missing children cases, whether through parental kidnappings, abductions by strangers, runaway or "throwaway" cases, and those in which the circumstances are unknown. The guide describes, step-by-step, the investigative process required for each of the four types of missing…

A dynamic programming approach to missing data estimation using neural networks

CSIR Research Space (South Africa)

Nelwamondo, FV

2013-01-01

Full Text Available method where dynamic programming is not used. This paper also suggests a different way of formulating a missing data problem such that the dynamic programming is applicable to estimate the missing data....

2D temperature field measurement in a direct-injection engine using LIF technology

Science.gov (United States)

Liu, Yongfeng; Tian, Hongsen; Yang, Jianwei; Sun, Jianmin; Zhu, Aihua

2011-12-01

A new multi-spectral detection strategy for temperature laser- induced- fluorescence (LIF) 2-D imaging measurements is reported for high pressure flames in high-speed diesel engine. Schematic of the experimental set-up is outlined and the experimental data on the diesel engine is summarized. Experiment injection system is a third generation Bosch high-pressure common rail featuring a maximum pressure of 160MPa. The injector is equipped with a six-hole nozzle, where each hole has a diameter of 0.124 mm. and slightly offset to the center of the cylinder axis to allow a better cooling of the narrow bridge between the exhaust valves. The measurement system includes a blower, which supplied the intake flow rate, and a prototype single-valve direct injection diesel engine head modified to lay down the swirled-type injector. 14-bit digital CCD cameras are employed to achieve a greater level of accuracy in comparison to the results of previous measurements. The temperature field spatial distributions in the cylinder for different crank angle degrees are carried out in a single direct-injection diesel engine.

Acupuncture Injection Combined with Electrokinetic Injection for Polydimethylsiloxane Microfluidic Devices

Directory of Open Access Journals (Sweden)

Ji Won Ha

2017-01-01

Full Text Available We recently reported acupuncture sample injection that leads to reproducible injection of nL-scale sample segments into a polydimethylsiloxane (PDMS microchannel for microchip capillary electrophoresis. The advantages of the acupuncture injection in microchip capillary electrophoresis include capability of minimizing sample loss and voltage control hardware and capability of introducing sample plugs into any desired position of a microchannel. However, the challenge in the previous study was to achieve reproducible, pL-scale sample injections into PDMS microchannels. In the present study, we introduce an acupuncture injection technique combined with electrokinetic injection (AICEI technique to inject pL-scale sample segments for microchip capillary electrophoresis. We carried out the capillary zone electrophoresis (CZE separation of FITC and fluorescein, and the mixture of 10 μM FITC and 10 μM fluorescein was separated completely by using the AICEI method.

Establishing a threshold for the number of missing days using 7 d pedometer data.

Science.gov (United States)

Kang, Minsoo; Hart, Peter D; Kim, Youngdeok

2012-11-01

The purpose of this study was to examine the threshold of the number of missing days of recovery using the individual information (II)-centered approach. Data for this study came from 86 participants, aged from 17 to 79 years old, who had 7 consecutive days of complete pedometer (Yamax SW 200) wear. Missing datasets (1 d through 5 d missing) were created by a SAS random process 10,000 times each. All missing values were replaced using the II-centered approach. A 7 d average was calculated for each dataset, including the complete dataset. Repeated measure ANOVA was used to determine the differences between 1 d through 5 d missing datasets and the complete dataset. Mean absolute percentage error (MAPE) was also computed. Mean (SD) daily step count for the complete 7 d dataset was 7979 (3084). Mean (SD) values for the 1 d through 5 d missing datasets were 8072 (3218), 8066 (3109), 7968 (3273), 7741 (3050) and 8314 (3529), respectively (p > 0.05). The lower MAPEs were estimated for 1 d missing (5.2%, 95% confidence interval (CI) 4.4-6.0) and 2 d missing (8.4%, 95% CI 7.0-9.8), while all others were greater than 10%. The results of this study show that the 1 d through 5 d missing datasets, with replaced values, were not significantly different from the complete dataset. Based on the MAPE results, it is not recommended to replace more than two days of missing step counts.

Design and implementation of equipment for monitoring the salinity in the subsoil

Directory of Open Access Journals (Sweden)

Mariano Norzagaray Campos

2012-09-01

Full Text Available Geochemical exploration equipments to explore the contaminants and structures geological in the subsoil come from abroad are expensive and sometimes parts for replacement are not available in the market. So it is necessary design apparatus that meet cover these needs. To the monitoring of variations in salinity there is semi-automatic equipment, but it always has difficult to manage. However, is not equipment for the indirect study of salinity in the subsoil. In this work was design equipment for measurement the apparent resistivity in the subsoil, at same time allow know the salinity, as well as the detection of any pollutant in groundwater. For make it, was selected a design of earthing systems, with electronic hardware which were jointed for apply to subsoil a direct current (DC through an array dipole-dipole and vertical electric sounding, with brass and stainless steel electrodes. In the earthing systems the electrodes were collocated in the equidistant line between the detectors of potential and current. A geometric factor (K, that depend on theelectrodes distance and direct current (I injected in the electrodes A and B, was used for measure the potential difference between the electrodes M and N; after was calculate the resistivity point to point for obtain a subsoil tomography geoelectrical. The equipment was calibrated with minimum error (rms < 2% whit respect to curves obtained in similar commercial equipment. On this situation, in this work was modernized and automated an equipment to determine thesalinity of the subsoil. The instrument was tasted in the micro basin Texcoco, State of Mexico, to define the environment geometry formed by alluvial or lake sediments from igneous rocks (andesites, rhyolites and tuffs vitreous or “tepetates” which by its mineralogical composition allowed to the lateral resistivity be associate with free components trace from the aquifer: Cd, Cu, Cr, Co, Ni, Pb or Zn and others. This method constitutes

Maternal death and near miss measurement

African Journals Online (AJOL)

ABEOLUGBENGAS

2008-05-26

May 26, 2008 ... Maternal health services need to be accountable more than ever ... of maternal death and near miss audit, surveillance and review is ..... (d) A fundamental principle of these ..... quality assurance in obstetrics in Nigeria - a.

RETRIEVAL EQUIPMENT DESCRIPTIONS

International Nuclear Information System (INIS)

J. Steinhoff

1997-01-01

The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler

Interpolation of Missing Precipitation Data Using Kernel Estimations for Hydrologic Modeling

Directory of Open Access Journals (Sweden)

Hyojin Lee

2015-01-01

Full Text Available Precipitation is the main factor that drives hydrologic modeling; therefore, missing precipitation data can cause malfunctions in hydrologic modeling. Although interpolation of missing precipitation data is recognized as an important research topic, only a few methods follow a regression approach. In this study, daily precipitation data were interpolated using five different kernel functions, namely, Epanechnikov, Quartic, Triweight, Tricube, and Cosine, to estimate missing precipitation data. This study also presents an assessment that compares estimation of missing precipitation data through Kth nearest neighborhood (KNN regression to the five different kernel estimations and their performance in simulating streamflow using the Soil Water Assessment Tool (SWAT hydrologic model. The results show that the kernel approaches provide higher quality interpolation of precipitation data compared with the KNN regression approach, in terms of both statistical data assessment and hydrologic modeling performance.

MISSE 6 Polymer Film Tensile Experiment

Science.gov (United States)

Miller, Sharon K. R.; Dever, Joyce A.; Banks, Bruce A.; Waters, Deborah L.; Sechkar, Edward; Kline, Sara

2010-01-01

The Polymer Film Tensile Experiment (PFTE) was flown as part of Materials International Space Station Experiment 6 (MISSE 6). The purpose of the experiment was to expose a variety of polymer films to the low Earth orbital environment under both relaxed and tension conditions. The polymers selected are those commonly used for spacecraft thermal control and those under consideration for use in spacecraft applications such as sunshields, solar sails, and inflatable and deployable structures. The dog-bone shaped samples of polymers that were flown were exposed on both the side of the MISSE 6 Passive Experiment Container (PEC) that was facing into the ram direction (receiving atomic oxygen, ultraviolet (UV) radiation, ionizing radiation, and thermal cycling) and the wake facing side (which was supposed to have experienced predominantly the same environmental effects except for atomic oxygen which was present due to reorientation of the International Space Station). A few of the tensile samples were coated with vapor deposited aluminum on the back and wired to determine the point in the flight when the tensile sample broke as recorded by a change in voltage that was stored on battery powered data loggers for post flight retrieval and analysis. The data returned on the data loggers was not usable. However, post retrieval observation and analysis of the samples was performed. This paper describes the preliminary analysis and observations of the polymers exposed on the MISSE 6 PFTE.

"Injection first": a unique group of injection drug users in Tijuana, Mexico.

Science.gov (United States)

Morris, Meghan D; Brouwer, Kimberly C; Lozada, Remedios M; Gallardo, Manuel; Vera, Alicia; Strathdee, Steffanie A

2012-01-01

Using baseline data from a study of injection drug users (IDUs) in Tijuana, Mexico (N = 1,052), we identified social and behavioral factors associated with injecting at the same age or earlier than other administration routes of illicit drug use (eg, "injection first") and examined whether this IDU subgroup had riskier drug using and sexual behaviors than other IDUs. Twelve-percent "injected first." Characteristics independently associated with a higher odds of "injection first" included being younger at first injection, injecting heroin as their first drug, being alone at the first injection episode, and having a sexual debut at the same age or earlier as when they initiated drug use; family members' illicit drug use was associated with lower odds of injecting first. When adjusting for age at first injection and number of years injecting, "injection first" IDUs had lower odds of ever overdosing, and ever trading sex. On the other hand, they were less likely to have ever been enrolled in drug treatment, and more commonly obtained their syringes from potentially unsafe sources. In conclusion, a sizable proportion of IDUs in Tijuana injected as their first drug using experience, although evidence that this was a riskier subgroup of IDUs was inconclusive.  Copyright © American Academy of Addiction Psychiatry.

Diagnostic Laparoscopy for Trauma: How Not to Miss Injuries.

Science.gov (United States)

Koto, Modise Z; Matsevych, Oleh Y; Aldous, Colleen

2018-05-01

Diagnostic laparoscopy (DL) is a well-accepted approach for penetrating abdominal trauma (PAT). However, the steps of procedure and the systematic laparoscopic examination are not clearly defined in the literature. The aim of this study was to clarify the definition of DL in trauma surgery by auditing DL performed for PAT at our institution, and to describe the strategies on how to avoid missed injuries. The data of patients managed with laparoscopy for PAT from January 2012 to December 2015 were retrospectively analyzed. The details of operative technique and strategies on how to avoid missed injuries were discussed. Out of 250 patients managed with laparoscopy for PAT, 113 (45%) patients underwent DL. Stab wounds sustained 94 (83%) patients. The penetration of the peritoneal cavity or retroperitoneum was documented in 67 (59%) of patients. Organ evisceration was present in 21 (19%) patients. Multiple injuries were present in 22% of cases. The chest was the most common associated injury. Two (1.8%) iatrogenic injuries were recorded. The conversion rate was 1.7% (2/115). The mean length of hospital stay was 4 days. There were no missed injuries. In the therapeutic laparoscopy (TL) group, DL was performed as the initial part and identified all injuries. There were no missed injuries in the TL group. The predetermined sequential steps of DL and the standard systematic examination of intraabdominal organs were described. DL is a feasible and safe procedure. It accurately identifies intraabdominal injuries. The selected use of preoperative imaging, adherence to the predetermined steps of procedure and the standard systematic laparoscopic examination will minimize the rate of missed injuries.

Data communication equipment

International Nuclear Information System (INIS)

Kim, Hak Seon; Lee, Sang Mok

1998-02-01

The contents of this book are introduction of data communication on definition, purpose and history, information terminal about data communication system and data transmission system, data transmit equipment of summary, transmission cable, data port, concentrator and front-end processor, audio communication equipment like phones, radio communication equipment of summary on foundation of electromagnetic waves, AM transmitter, AM receiver, FM receiver and FM transmitter, a satellite and mobile communication equipment such as earth station, TT and C and Cellular phone, video telephone and new media apparatus.

Medical equipment management

CERN Document Server

Willson, Keith; Tabakov, Slavik

2013-01-01

Know What to Expect When Managing Medical Equipment and Healthcare Technology in Your Organization As medical technology in clinical care becomes more complex, clinical professionals and support staff must know how to keep patients safe and equipment working in the clinical environment. Accessible to all healthcare professionals and managers, Medical Equipment Management presents an integrated approach to managing medical equipment in healthcare organizations. The book explains the underlying principles and requirements and raises awareness of what needs to be done and what questions to ask. I

Optimal simultaneous superpositioning of multiple structures with missing data.

Science.gov (United States)

Theobald, Douglas L; Steindel, Phillip A

2012-08-01

Superpositioning is an essential technique in structural biology that facilitates the comparison and analysis of conformational differences among topologically similar structures. Performing a superposition requires a one-to-one correspondence, or alignment, of the point sets in the different structures. However, in practice, some points are usually 'missing' from several structures, for example, when the alignment contains gaps. Current superposition methods deal with missing data simply by superpositioning a subset of points that are shared among all the structures. This practice is inefficient, as it ignores important data, and it fails to satisfy the common least-squares criterion. In the extreme, disregarding missing positions prohibits the calculation of a superposition altogether. Here, we present a general solution for determining an optimal superposition when some of the data are missing. We use the expectation-maximization algorithm, a classic statistical technique for dealing with incomplete data, to find both maximum-likelihood solutions and the optimal least-squares solution as a special case. The methods presented here are implemented in THESEUS 2.0, a program for superpositioning macromolecular structures. ANSI C source code and selected compiled binaries for various computing platforms are freely available under the GNU open source license from http://www.theseus3d.org. dtheobald@brandeis.edu Supplementary data are available at Bioinformatics online.

Maternal Near-Miss Due to Unsafe Abortion and Associated Short ...

African Journals Online (AJOL)

Abstract. Little is known about maternal near-miss (MNM) due to unsafe abortion in Nigeria. We used the WHO criteria to identify near-miss events and the proportion due to unsafe abortion among women of childbearing age in eight large secondary and tertiary hospitals across the six geo-political zones. We also explored ...

A New Missing Values Estimation Algorithm in Wireless Sensor Networks Based on Convolution

Directory of Open Access Journals (Sweden)

Feng Liu

2013-04-01

Full Text Available Nowadays, with the rapid development of Internet of Things (IoT applications, data missing phenomenon becomes very common in wireless sensor networks. This problem can greatly and directly threaten the stability and usability of the Internet of things applications which are constructed based on wireless sensor networks. How to estimate the missing value has attracted wide interest, and some solutions have been proposed. Different with the previous works, in this paper, we proposed a new convolution based missing value estimation algorithm. The convolution theory, which is usually used in the area of signal and image processing, can also be a practical and efficient way to estimate the missing sensor data. The results show that the proposed algorithm in this paper is practical and effective, and can estimate the missing value accurately.

Predictors of missed appointments in patients referred for congenital or pediatric cardiac magnetic resonance

Energy Technology Data Exchange (ETDEWEB)

Lu, Jimmy C.; Dorfman, Adam L. [C.S. Mott Children' s Hospital, Department of Pediatrics and Communicable Diseases, Division of Pediatric Cardiology, University of Michigan Health System, University of Michigan Congenital Heart Center, Ann Arbor, MI (United States); C.S. Mott Children' s Hospital, Department of Radiology, University of Michigan Health System, Section of Pediatric Radiology, Ann Arbor, MI (United States); Lowery, Ray; Yu, Sunkyung [C.S. Mott Children' s Hospital, Department of Pediatrics and Communicable Diseases, Division of Pediatric Cardiology, University of Michigan Health System, University of Michigan Congenital Heart Center, Ann Arbor, MI (United States); Ghadimi Mahani, Maryam [C.S. Mott Children' s Hospital, Department of Radiology, University of Michigan Health System, Section of Pediatric Radiology, Ann Arbor, MI (United States); Agarwal, Prachi P. [University of Michigan Health System, Department of Radiology, Division of Cardiothoracic Radiology, Ann Arbor, MI (United States)

2017-07-15

Congenital cardiac magnetic resonance is a limited resource because of scanner and physician availability. Missed appointments decrease scheduling efficiency, have financial implications and represent missed care opportunities. To characterize the rate of missed appointments and identify modifiable predictors. This single-center retrospective study included all patients with outpatient congenital or pediatric cardiac MR appointments from Jan. 1, 2014, through Dec. 31, 2015. We identified missed appointments (no-shows or same-day cancellations) from the electronic medical record. We obtained demographic and clinical factors from the medical record and assessed socioeconomic factors by U.S. Census block data by patient ZIP code. Statistically significant variables (P<0.05) were included into a multivariable analysis. Of 795 outpatients (median age 18.5 years, interquartile range 13.4-27.1 years) referred for congenital cardiac MR, a total of 91 patients (11.4%) missed appointments; 28 (3.5%) missed multiple appointments. Reason for missed appointment could be identified in only 38 patients (42%), but of these, 28 (74%) were preventable or could have been identified prior to the appointment. In multivariable analysis, independent predictors of missed appointments were referral by a non-cardiologist (adjusted odds ratio [AOR] 5.8, P=0.0002), referral for research (AOR 3.6, P=0.01), having public insurance (AOR 2.1, P=0.004), and having scheduled cardiac MR from November to April (AOR 1.8, P=0.01). Demographic factors can identify patients at higher risk for missing appointments. These data may inform initiatives to limit missed appointments, such as targeted education of referring providers and patients. Further data are needed to evaluate the efficacy of potential interventions. (orig.)

Protannotator: a semiautomated pipeline for chromosome-wise functional annotation of the "missing" human proteome.

Science.gov (United States)

Islam, Mohammad T; Garg, Gagan; Hancock, William S; Risk, Brian A; Baker, Mark S; Ranganathan, Shoba

2014-01-03

The chromosome-centric human proteome project (C-HPP) aims to define the complete set of proteins encoded in each human chromosome. The neXtProt database (September 2013) lists 20,128 proteins for the human proteome, of which 3831 human proteins (∼19%) are considered "missing" according to the standard metrics table (released September 27, 2013). In support of the C-HPP initiative, we have extended the annotation strategy developed for human chromosome 7 "missing" proteins into a semiautomated pipeline to functionally annotate the "missing" human proteome. This pipeline integrates a suite of bioinformatics analysis and annotation software tools to identify homologues and map putative functional signatures, gene ontology, and biochemical pathways. From sequential BLAST searches, we have primarily identified homologues from reviewed nonhuman mammalian proteins with protein evidence for 1271 (33.2%) "missing" proteins, followed by 703 (18.4%) homologues from reviewed nonhuman mammalian proteins and subsequently 564 (14.7%) homologues from reviewed human proteins. Functional annotations for 1945 (50.8%) "missing" proteins were also determined. To accelerate the identification of "missing" proteins from proteomics studies, we generated proteotypic peptides in silico. Matching these proteotypic peptides to ENCODE proteogenomic data resulted in proteomic evidence for 107 (2.8%) of the 3831 "missing proteins, while evidence from a recent membrane proteomic study supported the existence for another 15 "missing" proteins. The chromosome-wise functional annotation of all "missing" proteins is freely available to the scientific community through our web server (http://biolinfo.org/protannotator).

Bone scan as a screening test for missed fractures in severely injured patients.

Science.gov (United States)

Lee, K-J; Jung, K; Kim, J; Kwon, J

2014-12-01

In many cases, patients with severe blunt trauma have multiple fractures throughout the body. These fractures are not often detectable by history or physical examination, and their diagnosis can be delayed or even missed. Thus, screening test fractures of the whole body is required after initial management. We performed this study to evaluate the reliability of bone scans for detecting missed fractures in patients with multiple severe traumas and we analyzed the causes of missed fractures by using bone scan. A bone scan is useful as a screening test for fractures of the entire body of severe trauma patients who are passed the acute phase. We reviewed the electronic medical records of severe trauma patients who underwent a bone scan from September 2009 to December 2010. Demographic and medical data were compared and statistically analyzed to determine whether missed fractures were detected after bone scan in the two groups. A total of 382 patients who had an injury severity score [ISS] greater than 16 points with multiple traumas visited the emergency room. One hundred and thirty-one patients underwent bone scan and 81 patients were identified with missed fractures by bone scan. The most frequent location for missed fractures was the rib area (55 cases, 41.98%), followed by the extremities (42 cases, 32.06%). The missed fractures that required surgery or splint were most common in extremities (11 cases). In univariate analysis, higher ISS scores and mechanism of injury were related with the probability that missed fractures would be found with a bone scan. The ISS score was statistically significant in multivariate analysis. Bone scan is an effective method of detecting missed fractures among patients with multiple severe traumas. Level IV, retrospective study. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Physicochemical characterization of particulate emissions from a compression ignition engine employing two injection technologies and three fuels.

Science.gov (United States)

Surawski, N C; Miljevic, B; Ayoko, G A; Roberts, B A; Elbagir, S; Fairfull-Smith, K E; Bottle, S E; Ristovski, Z D

2011-07-01

Alternative fuels and injection technologies are a necessary component of particulate emission reduction strategies for compression ignition engines. Consequently, this study undertakes a physicochemical characterization of diesel particulate matter (DPM) for engines equipped with alternative injection technologies (direct injection and common rail) and alternative fuels (ultra low sulfur diesel, a 20% biodiesel blend, and a synthetic diesel). Particle physical properties were addressed by measuring particle number size distributions, and particle chemical properties were addressed by measuring polycyclic aromatic hydrocarbons (PAHs) and reactive oxygen species (ROS). Particle volatility was determined by passing the polydisperse size distribution through a thermodenuder set to 300 °C. The results from this study, conducted over a four point test cycle, showed that both fuel type and injection technology have an impact on particle emissions, but injection technology was the more important factor. Significant particle number emission (54%-84%) reductions were achieved at half load operation (1% increase-43% decrease at full load) with the common rail injection system; however, the particles had a significantly higher PAH fraction (by a factor of 2 to 4) and ROS concentrations (by a factor of 6 to 16) both expressed on a test-cycle averaged basis. The results of this study have significant implications for the health effects of DPM emissions from both direct injection and common rail engines utilizing various alternative fuels.

Safe injection procedures, injection practices, and needlestick ...

African Journals Online (AJOL)

Nermine Mohamed Tawfik Foda

2017-01-10

Jan 10, 2017 ... Background: Of the estimated 384,000 needle-stick injuries occurring in hospitals each year, 23% occur in surgical settings. This study was conducted to assess safe injection procedures, injection practices, and circumstances contributing to needlestick and sharps injures (NSSIs) in operating rooms.

Missing mass from low-luminosity stars

International Nuclear Information System (INIS)

Hawkins, M.R.S.

1986-01-01

Results from a deep photometric survey for low-luminosity stars show a turnup to the luminosity function at faint magnitudes, and reopen the possibility that the missing mass in the solar neighbourhood is made up of stars after all. (author)

Large sharing networks and unusual injection practices explain the rapid rise in HIV among IDUs in Sargodha, Pakistan

Directory of Open Access Journals (Sweden)

Qureshi Salman U

2009-06-01

Full Text Available Abstract Background Of the nearly 100,000 street-based IDUs in Pakistan, 20% have HIV. We investigated the recent rise in HIV prevalence from 12 to 52% among IDUs in Sargodha despite > 70% coverage with syringe exchanges. Methods We interviewed approximately 150 IDUs and 30 outreach workers in focus group discussions. Results We found six rural and 28 urban injecting locations. Urban locations have about 20–30 people at any time and about 100 daily; rural locations have twice as many (national average: 4–15. About half of the IDUs started injecting within the past 2 years and are not proficient at injecting themselves. They use street injectors, who have 15–16 clients daily. Heroin is almost exclusively the drug used. Most inject 5–7 times daily. Nearly all injectors claim to use fresh syringes. However, they load, inject and share using a locally developed method called scale. Most Pakistani IDUs prefer to double pump drug the syringe, which allows mixing of blood with drug in the syringe. The injector injects 3 ml and keeps 2 ml (the scale as injection fee. The injector usually pools all the leftover scale (now with some blood mixed with drug either for his own use or to sell it. Most IDUs backload the scale they buy into their own fresh syringes. Discussion Use of an unprecedented method of injecting drugs that largely bypasses fresh syringes, larger size of sharing networks, higher injection frequency and near universal use of street injectors likely explain for the rapid rise in HIV prevalence among IDUs in Sargodha despite high level provision of fresh syringes. This had been missed by us and the national surveillance, which is quantitative. We have addressed this by hiring injectors as peer outreach workers and increasing syringe supply. Our findings highlight both the importance of qualitative research and operations research to enrich the quality of HIV prevention programs.

Missed treatment opportunities and barriers to comprehensive treatment for sexual violence survivors in Kenya: a mixed methods study.

Science.gov (United States)

Gatuguta, Anne; Merrill, Katherine G; Colombini, Manuela; Soremekun, Seyi; Seeley, Janet; Mwanzo, Isaac; Devries, Karen

2018-06-19

In Kenya, most sexual violence survivors either do not access healthcare, access healthcare late or do not complete treatment. To design interventions that ensure optimal healthcare for survivors, it is important to understand the characteristics of those who do and do not access healthcare. In this paper, we aim to: compare the characteristics of survivors who present for healthcare to those of survivors reporting violence on national surveys; understand the healthcare services provided to survivors; and, identify barriers to treatment. A mixed methods approach was used. Hospital records for survivors from two referral hospitals were compared with national-level data from the Kenya Demographic and Health Survey 2014, and the Violence Against Children Survey 2010. Descriptive summaries were calculated and differences in characteristics of the survivors assessed using chi-square tests. Qualitative data from six in-depth interviews with healthcare providers were analysed thematically. Among the 543 hospital respondents, 93.2% were female; 69.5% single; 71.9% knew the perpetrator; and 69.2% were children below 18 years. Compared to respondents disclosing sexual violence in nationally representative datasets, those who presented at hospital were less likely to be partnered, male, or assaulted by an intimate partner. Data suggest missed opportunities for treatment among those who did present to hospital: HIV PEP and other STI prophylaxis was not given to 30 and 16% of survivors respectively; 43% of eligible women did not receive emergency contraceptive; and, laboratory results were missing in more than 40% of the records. Those aged 18 years or below and those assaulted by known perpetrators were more likely to miss being put on HIV PEP. Qualitative data highlighted challenges in accessing and providing healthcare that included stigma, lack of staff training, missing equipment and poor coordination of services. Nationally, survivors at higher risk of not accessing

Did you miss the eclipse?

CERN Multimedia

CERN Bulletin

2015-01-01

Not wanting to miss a moment of the beautiful celestial dance that played out on Friday, 20 March, Jens Roder of CERN’s PH group took to the Jura mountains, where he got several shots of the event. Here are a selection of his photos, which he was kind enough to share with the Bulletin and its readers.  

Patterns and Outcome of Missed Injuries in Egyptians Polytrauma Patients

Directory of Open Access Journals (Sweden)

Adel Hamed Elbaih

2018-01-01

Full Text Available Introduction: “polytrauma” patients are higher risk of complications and death than the summation of expected mortality and morbidity of their individual injuries. The ideal goal in trauma resuscitation care is to identify and treat all injuries. With clinical and technological advanced imaging available for diagnosis and treatment of traumatic patients, missed injuries still significant affect modern trauma services and its outcome. Aim: to improve outcome and determine the incidence and nature of missed injuries in polytrauma patients. Methods: the study is a cross-sectional, prospective study included 600 polytraumatized patients admitted in Suez Canal University Hospital. Firstly assessed and treated accordingly to Advanced Trauma Life Support (ATLS guidelines and treat the life threading conditions if present with follow-up short outcome for 28 days. Results: The most common precipitate factor for missed injuries in my study was clinical evaluation error due to Inadequate diagnostic workup in 42.9%. And the second risk factor was Deficiency in Physical Examination in 35.7%. Lastly Incomplete assessment due to patient instability in 10.7% and incorrect interpretation of imaging10.7%.low rates of missed injuries (40.8% in patients arriving during the day compared with (59.2% of night arrivals. Conclusion: the incidence of missed injuries in the study is 9.0 % which is still high compared to many trauma centers. And mostly increase the period of stay in the hospital and affect the outcome of polytrauma patients.

Genomic Variants Revealed by Invariably Missing Genotypes in Nelore Cattle.

Directory of Open Access Journals (Sweden)

Joaquim Manoel da Silva

Full Text Available High density genotyping panels have been used in a wide range of applications. From population genetics to genome-wide association studies, this technology still offers the lowest cost and the most consistent solution for generating SNP data. However, in spite of the application, part of the generated data is always discarded from final datasets based on quality control criteria used to remove unreliable markers. Some discarded data consists of markers that failed to generate genotypes, labeled as missing genotypes. A subset of missing genotypes that occur in the whole population under study may be caused by technical issues but can also be explained by the presence of genomic variations that are in the vicinity of the assayed SNP and that prevent genotyping probes from annealing. The latter case may contain relevant information because these missing genotypes might be used to identify population-specific genomic variants. In order to assess which case is more prevalent, we used Illumina HD Bovine chip genotypes from 1,709 Nelore (Bos indicus samples. We found 3,200 missing genotypes among the whole population. NGS re-sequencing data from 8 sires were used to verify the presence of genomic variations within their flanking regions in 81.56% of these missing genotypes. Furthermore, we discovered 3,300 novel SNPs/Indels, 31% of which are located in genes that may affect traits of importance for the genetic improvement of cattle production.

Renewal of radiological equipment.

Science.gov (United States)

2014-10-01

In this century, medical imaging is at the heart of medical practice. Besides providing fast and accurate diagnosis, advances in radiology equipment offer new and previously non-existing options for treatment guidance with quite low morbidity, resulting in the improvement of health outcomes and quality of life for the patients. Although rapid technological development created new medical imaging modalities and methods, the same progress speed resulted in accelerated technical and functional obsolescence of the same medical imaging equipment, consequently creating a need for renewal. Older equipment has a high risk of failures and breakdowns, which might cause delays in diagnosis and treatment of the patient, and safety problems both for the patient and the medical staff. The European Society of Radiology is promoting the use of up-to-date equipment, especially in the context of the EuroSafe Imaging Campaign, as the use of up-to-date equipment will improve quality and safety in medical imaging. Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or renewal. This plan should look forward a minimum of 5 years, with annual updates. Teaching points • Radiological equipment has a definite life cycle span, resulting in unavoidable breakdown and decrease or loss of image quality which renders equipment useless after a certain time period.• Equipment older than 10 years is no longer state-of-the art equipment and replacement is essential. Operating costs of older equipment will be high when compared with new equipment, and sometimes maintenance will be impossible if no spare parts are available.• Older equipment has a high risk of failure and breakdown, causing delays in diagnosis and treatment of the patient and safety problems both for the patient and the medical staff.• Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or replacement. This plan should look forward a

Past and future implications of near-misses and their emotional consequences.

Science.gov (United States)

Zhang, Qiyuan; Covey, Judith

2014-01-01

The Reflection and Evaluation Model (REM) of comparative thinking predicts that temporal perspective could moderate people's emotional reactions to close counterfactuals following near-misses (Markman & McMullen, 2003). The experiments reported in this paper tested predictions derived from this theory by examining how people's emotional reactions to a near-miss at goal during a football match (Experiment 1) or a close score in a TV game show (Experiment 2) depended on the level of perceived future possibility. In support of the theory it was found that the presence of future possibility enhanced affective assimilation (e.g., if the near-miss occurred at the beginning of the game the players who had nearly scored were hopeful of future success) whereas the absence of future possibility enhanced affective contrast (e.g., if the near-miss occurred at the end of the game the players who had nearly scored were disappointed about missing an opportunity). Furthermore the experiments built upon our theoretical understanding by exploring the mechanisms which produce assimilation and contrast effects. In Experiment 1 we examined the incidence of present-oriented or future-oriented thinking, and in Experiment 2 we examined the mediating role of counterfactual thinking in the observed effect of proximity on emotions by testing whether stronger counterfactuals (measured using counterfactual probability estimates) produce bigger contrast and assimilation effects. While the results of these investigations generally support the REM, they also highlight the necessity to consider other psychological mechanisms (e.g., social comparison), in addition to counterfactual thinking, that might contribute to the emotional consequences of near-miss outcomes.

Targeting safety improvements through identification of incident origination and detection in a near-miss incident learning system

International Nuclear Information System (INIS)

Novak, Avrey; Nyflot, Matthew J.; Ermoian, Ralph P.; Jordan, Loucille E.; Sponseller, Patricia A.; Kane, Gabrielle M.; Ford, Eric C.; Zeng, Jing

2016-01-01

Purpose: Radiation treatment planning involves a complex workflow that has multiple potential points of vulnerability. This study utilizes an incident reporting system to identify the origination and detection points of near-miss errors, in order to guide their departmental safety improvement efforts. Previous studies have examined where errors arise, but not where they are detected or applied a near-miss risk index (NMRI) to gauge severity. Methods: From 3/2012 to 3/2014, 1897 incidents were analyzed from a departmental incident learning system. All incidents were prospectively reviewed weekly by a multidisciplinary team and assigned a NMRI score ranging from 0 to 4 reflecting potential harm to the patient (no potential harm to potential critical harm). Incidents were classified by point of incident origination and detection based on a 103-step workflow. The individual steps were divided among nine broad workflow categories (patient assessment, imaging for radiation therapy (RT) planning, treatment planning, pretreatment plan review, treatment delivery, on-treatment quality management, post-treatment completion, equipment/software quality management, and other). The average NMRI scores of incidents originating or detected within each broad workflow area were calculated. Additionally, out of 103 individual process steps, 35 were classified as safety barriers, the process steps whose primary function is to catch errors. The safety barriers which most frequently detected incidents were identified and analyzed. Finally, the distance between event origination and detection was explored by grouping events by the number of broad workflow area events passed through before detection, and average NMRI scores were compared. Results: Near-miss incidents most commonly originated within treatment planning (33%). However, the incidents with the highest average NMRI scores originated during imaging for RT planning (NMRI = 2.0, average NMRI of all events = 1.5), specifically

Targeting safety improvements through identification of incident origination and detection in a near-miss incident learning system

Energy Technology Data Exchange (ETDEWEB)

Novak, Avrey; Nyflot, Matthew J.; Ermoian, Ralph P.; Jordan, Loucille E.; Sponseller, Patricia A.; Kane, Gabrielle M.; Ford, Eric C.; Zeng, Jing, E-mail: jzeng13@uw.edu [Department of Radiation Oncology, University of Washington Medical Center, 1959 NE Pacific Street, Campus Box 356043, Seattle, Washington 98195 (United States)

2016-05-15

Purpose: Radiation treatment planning involves a complex workflow that has multiple potential points of vulnerability. This study utilizes an incident reporting system to identify the origination and detection points of near-miss errors, in order to guide their departmental safety improvement efforts. Previous studies have examined where errors arise, but not where they are detected or applied a near-miss risk index (NMRI) to gauge severity. Methods: From 3/2012 to 3/2014, 1897 incidents were analyzed from a departmental incident learning system. All incidents were prospectively reviewed weekly by a multidisciplinary team and assigned a NMRI score ranging from 0 to 4 reflecting potential harm to the patient (no potential harm to potential critical harm). Incidents were classified by point of incident origination and detection based on a 103-step workflow. The individual steps were divided among nine broad workflow categories (patient assessment, imaging for radiation therapy (RT) planning, treatment planning, pretreatment plan review, treatment delivery, on-treatment quality management, post-treatment completion, equipment/software quality management, and other). The average NMRI scores of incidents originating or detected within each broad workflow area were calculated. Additionally, out of 103 individual process steps, 35 were classified as safety barriers, the process steps whose primary function is to catch errors. The safety barriers which most frequently detected incidents were identified and analyzed. Finally, the distance between event origination and detection was explored by grouping events by the number of broad workflow area events passed through before detection, and average NMRI scores were compared. Results: Near-miss incidents most commonly originated within treatment planning (33%). However, the incidents with the highest average NMRI scores originated during imaging for RT planning (NMRI = 2.0, average NMRI of all events = 1.5), specifically

Diagnostic miss rate for colorectal cancer: an audit.

Science.gov (United States)

Than, Mary; Witherspoon, Jolene; Shami, Javed; Patil, Prachi; Saklani, Avanish

2015-01-01

Colorectal cancer (CRC) is a common cancer worldwide. While screening improves survival, avoiding delayed diagnosis in symptomatic patients is crucial. Computed tomographic colonography (CTC) or colonoscopy is recommended as first-line investigation and most societies recommend counseling patients undergoing colonoscopy about a miss rate of 5%. This audit evaluates "miss rate" of colorectal investigations, which have led to diagnostic delay in symptomatic cases in a district general hospital in the United Kingdom. This is a retrospective review of 150 consecutive CRC cases presenting between August 2010 and July 2011. Evidence of bowel investigations done in the 3 years prior to diagnosis was obtained from computerized health records. Data regarding previous bowel investigations such as colonoscopy, CTC, double contrast barium enema (DCBE), and CT abdomen/pelvis were collected. 6.7% cases were identified via screening pathway while 93% were identified through symptomatic pathway. 17% (26/150) of newly diagnosed CRC had been investigated in the preceding 3 years. Of these, 8% (12/150) had false negative results. The false negative rate for CRC diagnosis was 3.5% for colonoscopy (3/85), 6.7% for CTC (1/17), 9.4% for CT (5/53), and 26.7% for DCBE (4/15). Some patients had a missed diagnosis despite more than one diagnostic test. Time delay to diagnosis ranged from 21-456 days. 17% of patients diagnosed with CRC had been investigated in the previous 3 years. Higher miss rate of barium enema should preclude its use as a first-line modality to investigate CRC.

Eesti Miss teeb videofilmi / Evelyn Mikomägi ; interv. Valdo Jahilo

Index Scriptorium Estoniae

Mikomägi, Evelyn

2001-01-01

Eesti Miss Estonia 2000 Evelyn Mikomägi tegi koos sõbra, Sven-Olof Svenne Englundiga dokfilmi Küprosel peetud maailma suurimast iludusvõistlusest Miss Universe 2000. Neile kuulub ühisfirma "Living Frames" Rootsis, mille peategevus on suunatud 16mm ja 35mm filmide tootmisele

Learning from near misses: from quick fixes to closing off the Swiss-cheese holes.

Science.gov (United States)

Jeffs, Lianne; Berta, Whitney; Lingard, Lorelei; Baker, G Ross

2012-04-01

The extent to which individuals in healthcare use near misses as learning opportunities remains poorly understood. Thus, an exploratory study was conducted to gain insight into the nature of, and contributing factors to, organisational learning from near misses in clinical practice. A constructivist grounded theory approach was employed which included semi-structured interviews with 24 participants (16 clinicians and 8 administrators) from a large teaching hospital in Canada. This study revealed three scenarios for the responses to near misses, the most common involved 'doing a quick fix' where clinicians recognised and corrected an error with no further action. The second scenario consisted of reporting near misses but not hearing back from management, which some participants characterised as 'going into a black hole'. The third scenario was 'closing off the Swiss-cheese holes', in which a reported near miss generated corrective action at an organisational level. Explanations for 'doing a quick fix' included the pervasiveness of near misses that cause no harm and fear associated with reporting the near miss. 'Going into a black hole' reflected managers' focus on operational duties and events that harmed patients. 'Closing off the Swiss-cheese holes' occurred when managers perceived substantial potential for harm and preventability. Where learning was perceived to occur, leaders played a pivotal role in encouraging near-miss reporting. To optimise learning, organisations will need to determine which near misses are appropriate to be responded to as 'quick fixes' and which ones require further action at the unit and corporate levels.

Patterns of substance use and correlates of lifetime and active injection drug use among women in Malaysia.

Science.gov (United States)

Wickersham, Jeffrey A; Loeliger, Kelsey B; Marcus, Ruthanne; Pillai, Veena; Kamarulzaman, Adeeba; Altice, Frederick L

2016-01-01

While drug use is associated with HIV risk in Southeast Asia, little is known about substance use behaviors among women, including drug injection. To describe patterns of substance use among women using alcohol and drugs in Malaysia and identify correlates of lifetime and active drug injection, a risk factor for HIV transmission. A survey of 103 women who used drugs in the last 12 months assessed drug use history and frequency, including drug injection and drug use during pregnancy, self-reported HIV-status, childhood and adulthood physical and sexual abuse, and access to and utilization of harm reduction services, including needle-syringe exchange programs (NSEP) and opioid agonist maintenance therapy (OAT). Principal component analyses (PCA) were conducted to assess drug use grouping. Amphetamine-type substances (ATS; 82.5%), alcohol (75.7%) and heroin (71.8%) were the most commonly used drugs across the lifetime. Drug injection was reported by 32.0% (n = 33) of participants with 21.4% (n = 22) having injected in the last 30 days. PCA identified two groups of drug users: opioids/benzodiazepines and club drugs. Lifetime drug injection was significantly associated with lower education, homelessness, prior criminal justice involvement, opioid use, polysubstance use, childhood physical and sexual abuse, and being HIV-infected, but not with prior OAT. Women who use drugs in Malaysia report high levels of polysubstance use and injection-related risk behaviors, including sharing of injection equipment and being injected by others. Low OAT utilization suggests the need for improved access to OAT services and other harm reduction measures that prioritize women.

The CIT [compact ignition tokamak] pellet injection system: Description and supporting research and development

International Nuclear Information System (INIS)

Gouge, M.J.; Combs, S.K.; Fisher, P.W.; Milora, S.L.

1989-01-01

The Compact Ignition Tokamak (CIT) will use an advance, high-velocity pellet injection system to achieve and maintain ignited plasmas. Two pellet injectors are provided: a moderate-velocity (1-to 1.5-km/s), single-stage pneumatic injector with high reliability and a high-velocity (4- to 5-km/s), two-stage pellet injector that uses frozen hydrogenic pellets encased in sabots. Both pellet injectors are qualified for operation with tritium feed gas. Issues such as performance, neutron activation of injector components, maintenance, design of the pellet injection vacuum line, gas loads to the reprocessing system, and equipment layout are discussed. Results and plans for supporting research and development (R and D) in the areas of tritium pellet fabrication and high-velocity, repetitive two-stage pneumatic injectors are presented. 7 refs., 4 figs., 2 tabs

Absence of missing mass in clusters

Energy Technology Data Exchange (ETDEWEB)

Fesenko, B.I.

1981-01-01

The evaluation of the radial-velocity dispersion in clusters of galaxies is considered by using order statistics to reduce the distortions introduced by foreground and background galaxies and by large errors in velocity measurement. For four nearby clusters of galaxies, including the Coma cluster, velocity dispersions are obtained which are approximately four times lower than previously reported values. It is found that more remote galaxies exhibit the same tendency to a reduction in missing mass. A detailed examination of the statistical properties of galaxies in the Virgo cluster reveals that the cluster might not actually exist, but may be just a large excess in the number density of bright galaxies, possibly the result of an increase in the visibility of objects in the appropriate directions. It is concluded that the presence of a large amount of missing mass in clusters of galaxies is yet to be proven.

Evaluation of severe accident environmental conditions taking accident management strategy into account for equipment survivability assessments

International Nuclear Information System (INIS)

Lee, Byung Chul; Jeong, Ji Hwan; Na, Man Gyun; Kim, Soong Pyung

2003-01-01

This paper presents a methodology utilizing accident management strategy in order to determine accident environmental conditions in equipment survivability assessments. In case that there is well-established accident management strategy for specific nuclear power plant, an application of this tool can provide a technical rationale on equipment survivability assessment so that plant-specific and time-dependent accident environmental conditions could be practically and realistically defined in accordance with the equipment and instrumentation required for accident management strategy or action appropriately taken. For this work, three different tools are introduced; Probabilistic Safety Assessment (PSA) outcomes, major accident management strategy actions, and Accident Environmental Stages (AESs). In order to quantitatively investigate an applicability of accident management strategy to equipment survivability, the accident simulation for a most likely scenario in Korean Standard Nuclear Power Plants (KSNPs) is performed with MAAP4 code. The Accident Management Guidance (AMG) actions such as the Reactor Control System (RCS) depressurization, water injection into the RCS, the containment pressure and temperature control, and hydrogen concentration control in containment are applied. The effects of these AMG actions on the accident environmental conditions are investigated by comparing with those from previous normal accident simulation, especially focused on equipment survivability assessment. As a result, the AMG-involved case shows the higher accident consequences along the accident environmental stages

Missed medical appointment among hypertensive and diabetic ...

African Journals Online (AJOL)

Keywords: Missed medical appointments, Hypertensive, Diabetic outpatients, Medication adherence, ... 12 weeks, at 95 % confidence level and 5 % error margin, 300 hypertensive ... monthly income and health insurance status of respondents ...

High risk behavior for HIV transmission among former injecting drug users:a survey from Indonesia

Directory of Open Access Journals (Sweden)

Iskandar Shelly

2010-08-01

Full Text Available Abstract Background Injecting drug use is an increasingly important cause of HIV transmission in most countries worldwide, especially in eastern Europe, South America, and east and southeast Asia. Among people actively injecting drugs, provision of clean needles and opioid substitution reduce HIV-transmission. However, former injecting drug users (fIDUs are often overlooked as a high risk group for HIV transmission. We compared HIV risk behavior among current and former injecting drug users (IDUs in Indonesia, which has a rapidly growing HIV-epidemic largely driven by injecting drug use. Methods Current and former IDUs were recruited by respondent driven sampling in an urban setting in Java, and interviewed regarding drug use and HIV risk behavior using the European Addiction Severity Index and the Blood Borne Virus Transmission Questionnaire. Drug use and HIV transmission risk behavior were compared between current IDUs and former IDUs, using the Mann-Whitney and Pearson Chi-square test. Results Ninety-two out of 210 participants (44% were self reported former IDUs. Risk behavior related to sex, tattooing or piercing was common among current as well as former IDUs, 13% of former IDUs were still exposed to contaminated injecting equipment. HIV-infection was high among former (66% and current (60% IDUs. Conclusion Former IDUs may contribute significantly to the HIV-epidemic in Indonesia, and HIV-prevention should therefore also target this group, addressing sexual and other risk behavior.

Adhesion strength between thermoplastics and its polyurethane coating made by using the technology combination of injection molding and reaction injection molding

Science.gov (United States)

Bloß, P.; Böhme, A.; Müller, J.; Krajewsky, P.; Michaelis, J.

2014-05-01

A complete equipment for injection molding (IM) of a thermoplastic (TP) carrier and reaction injection molding (RIM) of polyurethane (PUR) coatings including IM and RIM machines, a color module for PUR, and a robot was built up. A modularly composed sliding split mold was constructed and manufactured allowing different parts including thicker (2 mm thickness) soft touch and thin (0.4 mm) lacquer PUR coatings. As TP PC/ABS and PA6 GF15 compounds were used, and aromatic and aliphatic PUR systems as well. From the parts made by IM+RIM, test specimens for peel force measurements were cut. These investigations were performed prior and after ageing under climatic conditions @ 50 % RH and temperature changes between -30 °C and 90 °C. By varying IM processing parameters, we have found that mold and TP temperatures are particularly important for the adhesion strength between TP and PUR. The waiting time between the end of TP cooling and PUR injection has a minor influence on its mean value. However, to short waiting times may result in inhomogeneous adhesion. It was surprising that surface defects of the TP carrier leads also to inhomogeneous adhesion. We have observed that ageing may cause an increase and decrease of adhesions strength depending on the TP+PUR system used. We have found that the results are valid only for the actual TP and PUR combination. A generalization seems to be inappropriate, hence, the actual combination should be investigated to prevent unwanted surprises when the coated TP part is in its application.

Applying modern error theory to the problem of missed injuries in trauma.

Science.gov (United States)

Clarke, D L; Gouveia, J; Thomson, S R; Muckart, D J J

2008-06-01

Modern theory of human error has helped reduce the incidence of adverse events in commercial aviation. It remains unclear whether these lessons are applicable to adverse events in trauma surgery. Missed injuries in a large metropolitan surgical service were prospectively audited and analyzed using a modern error taxonomy to define its applicability to trauma. A prospective database of all patients who experienced a missed injury during a 6-month period in a busy surgical service was maintained from July 2006. A missed injury was defined as one that escaped detection from primary assessment to operative exploration. Each missed injury was recorded and categorized. The clinical significance of the error and the level of physician responsible was documented. Errors were divided into planning or execution errors, acts of omission or commission, or violations, slips, and lapses. A total of 1,024 trauma patients were treated by the surgical services over the 6-month period from July to December 2006 in Pietermaritzburg. Thirty-four patients (2.5%) with missed injuries were identified during this period. There were 29 men and 5 women with an average age of 29 years (range: 21-67 years). In 14 patients, errors were related to inadequate clinical assessment. In 11 patients errors involved the misinterpretation of, or failure to respond to radiological imaging. There were 9 cases in which an injury was missed during surgical exploration. Overall mortality was 27% (9 patients). In 5 cases death was directly attributable to the missed injury. The level of the physicians making the error was consultant surgeon (4 cases), resident in training (15 cases), career medical officer (2 cases), referring doctor (6 cases). Missed injuries are uncommon and are made by all grades of staff. They are associated with increased morbidity and mortality. Understanding the pattern of these errors may help develop error-reduction strategies. Current taxonomies help in understanding the error

New extruder-based deuterium feed system for centrifuge pellet injection

International Nuclear Information System (INIS)

Combs, S.K.; Foust, C.R.

1997-01-01

The pellet injection systems for the next-generation fusion devices (such as the International Thermonuclear Experimental Reactor) and future fusion reactors will have to provide deuterium-tritium fueling for much longer pulse lengths (up to ∼1000s) than present applications (typically limited to less than several seconds). Thus, a prototype pellet feed system for centrifuge pellet injection has been developed and used in long-pulse (>100s) tests at the Oak Ridge National Laboratory (ORNL). The new apparatus has two key components: (1) a cryogenic deuterium extruder and (2) an electromagnetic pellet punch mechanism. For maximum testing flexibility, the prototype is equipped with several other active components that allow remote adjustments, including precise positioning of the punch and the capability to index through eight different pellet lengths. The new feed system was designed to mate with an existing centrifuge accelerator facility at ORNL, and experiments in the facility were carried out to document the performance and reliability of the new feed system. With 2.3-mm-diam deuterium pellets and a catenary-shaped accelerator (∼1.2mdiam), the prototype feed system was found to be capable of placing up to ∼90% of the punched pellets in the proper time/space window for pickup and acceleration by the high-speed rotating (∼50Hz) arbor. For these operating parameters, the pellet nominal speed was ∼430m/s, and maximum pellet feed rates of 10 pellets/s and greater were tested. In this article the equipment is briefly described, and the experimental test results are summarized. Also, issues affecting overall pellet delivery efficiency are discussed. copyright 1997 American Institute of Physics

Three-Year Analysis of Value and Utilization After Development of an Ultrasound-Based Orthopedic Injection Clinic.

Science.gov (United States)

Dukes, Chase; Melton, Thomas; Turner, Eric; Jackson, Andrew; Grassbaugh, Jason; Slevin, John; Arrington, Edward D; Eichinger, Josef K

2017-09-01

Sonography is an effective method of diagnosing and treating musculoskeletal conditions, and the use of ultrasound has been shown to improve the accuracy, safety, and efficacy of both therapeutic and diagnostic injections. In 2012, we established an injection clinic at our institution to address our growing need for diagnostic and therapeutic injections. We performed an analysis of value and utilization following the development of an orthopedic injection clinic. This included an evaluation of the cost of materials, equipment, and training required to develop and run the clinic, and an analysis of the services rendered and relative value units (RVUs) generated over 3 fiscal years (FYs). The cost to develop the clinic was $42,498.30. The cost to run the clinic thereafter was $16.90 to $21.60 per injection. By the end of FY 2012, 60% of providers performed at least 1 injection under ultrasound guidance. Every successive year thereafter, 100% of providers were using ultrasound guidance. In FY 2012, we performed 738 injections, 5.4% used ultrasound guidance and generated a total of 1,786.36 RVUs. In FY 2013, we performed 1,814 injections, 17.6% used ultrasound guidance, and generated a total of 7,224.5 RVUs. In FY 2014, we performed 2,821 injections, 25.2% used ultrasound guidance, and generated 13,786.82 RVUs. RVUs generated solely from ultrasound guided injections were 463.2 (2012), 3,694 (2013), 8,221.8 (2014). Injection accuracy was at least 98%. Average time until injection was 0 days. The cost to start an injection clinic is modest, with the potential for large annual growth and early return on investment, and can generate significant revenue by recapturing RVUs that would otherwise be lost to outside referrals. Furthermore, it helps to increase clinic throughput, maximize services rendered during a single patient visit improving the overall quality of their encounter, expands the clinical practice of our midlevel providers, offloads clinical time for surgical

Hall-effect based semi-fast AC on-board charging equipment for electric vehicles.

Science.gov (United States)

Milanés-Montero, María Isabel; Gallardo-Lozano, Javier; Romero-Cadaval, Enrique; González-Romera, Eva

2011-01-01

The expected increase in the penetration of electric vehicles (EV) and plug-in hybrid electric vehicles (PHEV) will produce unbalanced conditions, reactive power consumption and current harmonics drawn by the battery charging equipment, causing a great impact on the power quality of the future smart grid. A single-phase semi-fast electric vehicle battery charger is proposed in this paper. This ac on-board charging equipment can operate in grid-to-vehicle (G2V) mode, and also in vehicle-to-grid (V2G) mode, transferring the battery energy to the grid when the vehicle is parked. The charger is controlled with a Perfect Harmonic Cancellation (PHC) strategy, contributing to improve the grid power quality, since the current demanded or injected has no harmonic content and a high power factor. Hall-effect current and voltage transducers have been used in the sensor stage to carry out this control strategy. Experimental results with a laboratory prototype are presented.

Modelling non-ignorable missing data mechanisms with item response theory models

NARCIS (Netherlands)

Holman, Rebecca; Glas, Cornelis A.W.

2005-01-01

A model-based procedure for assessing the extent to which missing data can be ignored and handling non-ignorable missing data is presented. The procedure is based on item response theory modelling. As an example, the approach is worked out in detail in conjunction with item response data modelled

Modelling non-ignorable missing-data mechanisms with item response theory models

NARCIS (Netherlands)

Holman, Rebecca; Glas, Cees A. W.

2005-01-01

A model-based procedure for assessing the extent to which missing data can be ignored and handling non-ignorable missing data is presented. The procedure is based on item response theory modelling. As an example, the approach is worked out in detail in conjunction with item response data modelled

A Comparison of Missing-Data Procedures for Arima Time-Series Analysis

Science.gov (United States)

Velicer, Wayne F.; Colby, Suzanne M.

2005-01-01

Missing data are a common practical problem for longitudinal designs. Time-series analysis is a longitudinal method that involves a large number of observations on a single unit. Four different missing-data methods (deletion, mean substitution, mean of adjacent observations, and maximum likelihood estimation) were evaluated. Computer-generated…

Prevalence and correlates of neck injection among people who inject drugs in Tijuana, Mexico.

Science.gov (United States)

Rafful, Claudia; Wagner, Karla D; Werb, Dan; González-Zúñiga, Patricia E; Verdugo, Silvia; Rangel, Gudelia; Strathdee, Steffanie A

2015-11-01

Injecting drugs in the neck has been related to adverse health conditions such as jugular vein thrombosis, deep neck infections, aneurysm, haematomas, airway obstruction, vocal cord paralysis and wound botulism, among others. We identified prevalence and correlates of neck injection among people who inject drugs (PWID) in Tijuana, Mexico. Beginning in 2011, PWID aged ≥18 years who injected drugs within the last month were recruited into a prospective cohort. At baseline and semi-annually, PWID completed interviewer-administered surveys soliciting data on drug-injecting practices. Logistic regression was used to identify predictors of injecting in the neck as the most frequent injection site at a single visit. Of 380 PWID, 35.3% injected in the neck at least once in the past 6 months, among whom 71.6% reported it as their most common injection site, the most common injecting site after the arms (47%). Controlling for age, years injecting and injecting frequency, injecting heroin and methamphetamine two or more times per day and having sought injection assistance were associated with injecting in the neck [adjusted odds ratios (AOR): 2.12; 95% confidence intervals (CI): 1.27-3.53 and AOR: 2.65; 95% CI: 1.52-4.53 respectively]. Injecting in the neck was very common among PWID in Tijuana and was associated with polydrug use and seeking injection assistance. Tailoring harm reduction education interventions for individuals who provide injection assistance ('hit doctors') may allow for the dissemination of safe injecting knowledge to reduce injection-related morbidity and mortality. © 2015 Australasian Professional Society on Alcohol and other Drugs.

Measurement of the ³He(e,e'p)pn Reaction at High Missing Energies and Momenta

Energy Technology Data Exchange (ETDEWEB)

Benmokhtar, Fatiha [Rutgers Univ., New Brunswick, NJ (United States)

2004-10-01

We investigate the structure of ³He through the measurement of quasielastic ³He(e,e'). The measurements use the high duty factor electron beam and the high-precision two-spectrometer system in Hall A of the Thomas Jefferson National Accelerator Facility (TJNAF). The measurements were performed in perpendicular kinematics at fixed momentum and energy transfer by the electron, |$\\vec{q}$|= 1.5 GeV/c and omega = 837 MeV, respectively. A description of the reaction in the plane wave impulse approximation is presented. The experimental equipment is described in detail. For the measurements, the kinematics of the experiment are given. The procedures to remove backgrounds and perform radiative corrections, are also discussed in detail. The detailed method of performing radiative corrections in particular is novel to this work. Finally, the resulting cross sections, distorted spectral functions, and asymmetry ATL are presented, and the physics implications are discussed. We extracted cross sections and distorted spectral functions up to high missing momentum, pm up to 1 GeV/c, and up to high missing energies, Em up to 140 MeV, the pion production threshold. The experimental data are much higher in statistics and much more extensive in kinematic coverage than any previous measurement. Theoretical predictions are in good agreement with the data, leading to the conclusion that the cross section at large missing momenta is strongly enhanced by nucleon-nucleon correlations, with additional enhancement from final-state interactions. The conventional NN correlations present in a modern three-body nuclear wave function, along with a modern reaction mechanism theory, appear sufficient to explain the data; there is no strong indication of a need to include any additional exotic physics, such as quark degrees of freedom.

Small-Volume Injections: Evaluation of Volume Administration Deviation From Intended Injection Volumes.

Science.gov (United States)

Muffly, Matthew K; Chen, Michael I; Claure, Rebecca E; Drover, David R; Efron, Bradley; Fitch, William L; Hammer, Gregory B

2017-10-01

In the perioperative period, anesthesiologists and postanesthesia care unit (PACU) nurses routinely prepare and administer small-volume IV injections, yet the accuracy of delivered medication volumes in this setting has not been described. In this ex vivo study, we sought to characterize the degree to which small-volume injections (≤0.5 mL) deviated from the intended injection volumes among a group of pediatric anesthesiologists and pediatric postanesthesia care unit (PACU) nurses. We hypothesized that as the intended injection volumes decreased, the deviation from those intended injection volumes would increase. Ten attending pediatric anesthesiologists and 10 pediatric PACU nurses each performed a series of 10 injections into a simulated patient IV setup. Practitioners used separate 1-mL tuberculin syringes with removable 18-gauge needles (Becton-Dickinson & Company, Franklin Lakes, NJ) to aspirate 5 different volumes (0.025, 0.05, 0.1, 0.25, and 0.5 mL) of 0.25 mM Lucifer Yellow (LY) fluorescent dye constituted in saline (Sigma Aldrich, St. Louis, MO) from a rubber-stoppered vial. Each participant then injected the specified volume of LY fluorescent dye via a 3-way stopcock into IV tubing with free-flowing 0.9% sodium chloride (10 mL/min). The injected volume of LY fluorescent dye and 0.9% sodium chloride then drained into a collection vial for laboratory analysis. Microplate fluorescence wavelength detection (Infinite M1000; Tecan, Mannedorf, Switzerland) was used to measure the fluorescence of the collected fluid. Administered injection volumes were calculated based on the fluorescence of the collected fluid using a calibration curve of known LY volumes and associated fluorescence.To determine whether deviation of the administered volumes from the intended injection volumes increased at lower injection volumes, we compared the proportional injection volume error (loge [administered volume/intended volume]) for each of the 5 injection volumes using a linear

Safeguards techniques and equipment. 2003 ed

International Nuclear Information System (INIS)

2003-01-01

-destructive analysis (NDA) techniques, and compare their findings with the declared figures and the operator's records. The next level of verification has the aim of detecting whether a fraction of a declared amount is missing (partial defect) and may involve the weighing of items and measurements with NDA techniques such as neutron counting or gamma-ray spectrometry. For detecting bias defects, which would arise if small amounts of material were diverted over a protracted length of time, it is necessary to sample some of the items and to apply physical and chemical analysis techniques having the highest possible accuracy, typically less than one per cent. In order to apply these destructive analysis (DA) techniques, the IAEA requires access to laboratories which use such accurate techniques on a routine basis. Containment and surveillance (C/S) techniques, which are complementary to nuclear material accountancy techniques, are applied in order to maintain continuity of the knowledge gained through IAEA verification, by giving assurance that nuclear material follows predetermined routes, that the integrity of its containment remains unimpaired and that the material is accounted for at the correct measurement points. They also lead to savings in the safeguards inspection effort, e.g. by reducing the frequency of accountancy verification. A variety of C/S techniques are used, primarily optical surveillance and sealing. In remote monitoring, the unattended equipment transmits the data off-site. For unattended and remote monitoring, additional criteria must be met, including high reliability and authentication of the data source. Data communication costs have dropped dramatically in recent years. Data security is an important feature of unattended and remote monitoring systems. Environmental sampling, which allows detection of minute traces of nuclear material, was added to the IAEA's verification measures in the early 1990s as a powerful tool for detecting indications of undeclared

The Network Completion Problem: Inferring Missing Nodes and Edges in Networks

Energy Technology Data Exchange (ETDEWEB)

Kim, M; Leskovec, J

2011-11-14

Network structures, such as social networks, web graphs and networks from systems biology, play important roles in many areas of science and our everyday lives. In order to study the networks one needs to first collect reliable large scale network data. While the social and information networks have become ubiquitous, the challenge of collecting complete network data still persists. Many times the collected network data is incomplete with nodes and edges missing. Commonly, only a part of the network can be observed and we would like to infer the unobserved part of the network. We address this issue by studying the Network Completion Problem: Given a network with missing nodes and edges, can we complete the missing part? We cast the problem in the Expectation Maximization (EM) framework where we use the observed part of the network to fit a model of network structure, and then we estimate the missing part of the network using the model, re-estimate the parameters and so on. We combine the EM with the Kronecker graphs model and design a scalable Metropolized Gibbs sampling approach that allows for the estimation of the model parameters as well as the inference about missing nodes and edges of the network. Experiments on synthetic and several real-world networks show that our approach can effectively recover the network even when about half of the nodes in the network are missing. Our algorithm outperforms not only classical link-prediction approaches but also the state of the art Stochastic block modeling approach. Furthermore, our algorithm easily scales to networks with tens of thousands of nodes.

On the Counterfactual Nature of Gambling Near‐misses: An Experimental Study

Science.gov (United States)

van Dijk, Eric; Li, Hong; Aitken, Michael; Clark, Luke

2017-01-01

Abstract Research on gambling near‐misses has shown that objectively equivalent outcomes can yield divergent emotional and motivational responses. The subjective processing of gambling outcomes is affected substantially by close but non‐obtained outcomes (i.e. counterfactuals). In the current paper, we investigate how different types of near‐misses influence self‐perceived luck and subsequent betting behavior in a wheel‐of‐fortune task. We investigate the counterfactual mechanism of these effects by testing the relationship with a second task measuring regret/relief processing. Across two experiments (Experiment 1, n = 51; Experiment 2, n = 104), we demonstrate that near‐wins (neutral outcomes that are close to a jackpot) decreased self‐perceived luck, whereas near‐losses (neutral outcomes that are close to a major penalty) increased luck ratings. The effects of near‐misses varied by near‐miss position (i.e. whether the spinner stopped just short of, or passed through, the counterfactual outcome), consistent with established distinctions between upward versus downward, and additive versus subtractive, counterfactual thinking. In Experiment 1, individuals who showed stronger counterfactual processing on the regret/relief task were more responsive to near‐wins and near‐losses on the wheel‐of‐fortune task. The effect of near‐miss position was attenuated when the anticipatory phase (i.e. the spin and deceleration) was removed in Experiment 2. Further differences were observed within the objective gains and losses, between “clear” and “narrow” outcomes. Taken together, these results help substantiate the counterfactual mechanism of near‐misses. © 2017 The Authors Journal of Behavioral Decision Making Published by John Wiley & Sons Ltd. PMID:29081596

What We’re Missing

OpenAIRE

Camille R. Whitney; Jing Liu

2017-01-01

For schools and teachers to help students develop knowledge and skills, students need to show up to class. Yet absenteeism is prevalent, especially in secondary schools. This study uses a rich data set tracking class attendance by day for over 50,000 middle and high school students from an urban district in academic years 2007–2008 through 2012–2013. Our results extend and modify the extant findings on absenteeism that have been based almost exclusively on full-day absenteeism, missing class-...

Cognitive distortions and gambling near-misses in Internet Gaming Disorder: A preliminary study.

Directory of Open Access Journals (Sweden)

Yin Wu

Full Text Available Increased cognitive distortions (i.e. biased processing of chance, probability and skill are a key psychopathological process in disordered gambling. The present study investigated state and trait aspects of cognitive distortions in 22 individuals with Internet Gaming Disorder (IGD and 22 healthy controls. Participants completed the Gambling Related Cognitions Scale as a trait measure of cognitive distortions, and played a slot machine task delivering wins, near-misses and full-misses. Ratings of pleasure ("liking" and motivation to play ("wanting" were taken following the different outcomes, and gambling persistence was measured after a mandatory phase. IGD was associated with elevated trait cognitive distortions, in particular skill-oriented cognitions. On the slot machine task, the IGD group showed increased "wanting" ratings compared with control participants, while the two groups did not differ regarding their "liking" of the game. The IGD group displayed increased persistence on the slot machine task. Near-miss outcomes did not elicit stronger motivation to play compared to full-miss outcomes overall, and there was no group difference on this measure. However, a near-miss position effect was observed, such that near-misses stopping before the payline were rated as more motivating than near-misses that stopped after the payline, and this differentiation was attenuated in the IGD group, suggesting possible counterfactual thinking deficits in this group. These data provide preliminary evidence for increased incentive motivation and cognitive distortions in IGD, at least in the context of a chance-based gambling environment.

Cognitive distortions and gambling near-misses in Internet Gaming Disorder: A preliminary study.

Science.gov (United States)

Wu, Yin; Sescousse, Guillaume; Yu, Hongbo; Clark, Luke; Li, Hong

2018-01-01

Increased cognitive distortions (i.e. biased processing of chance, probability and skill) are a key psychopathological process in disordered gambling. The present study investigated state and trait aspects of cognitive distortions in 22 individuals with Internet Gaming Disorder (IGD) and 22 healthy controls. Participants completed the Gambling Related Cognitions Scale as a trait measure of cognitive distortions, and played a slot machine task delivering wins, near-misses and full-misses. Ratings of pleasure ("liking") and motivation to play ("wanting") were taken following the different outcomes, and gambling persistence was measured after a mandatory phase. IGD was associated with elevated trait cognitive distortions, in particular skill-oriented cognitions. On the slot machine task, the IGD group showed increased "wanting" ratings compared with control participants, while the two groups did not differ regarding their "liking" of the game. The IGD group displayed increased persistence on the slot machine task. Near-miss outcomes did not elicit stronger motivation to play compared to full-miss outcomes overall, and there was no group difference on this measure. However, a near-miss position effect was observed, such that near-misses stopping before the payline were rated as more motivating than near-misses that stopped after the payline, and this differentiation was attenuated in the IGD group, suggesting possible counterfactual thinking deficits in this group. These data provide preliminary evidence for increased incentive motivation and cognitive distortions in IGD, at least in the context of a chance-based gambling environment.

What's Missing? Anti-Racist Sex Education!

Science.gov (United States)

Whitten, Amanda; Sethna, Christabelle

2014-01-01

Contemporary sexual health curricula in Canada include information about sexual diversity and queer identities, but what remains missing is any explicit discussion of anti-racist sex education. Although there exists federal and provincial support for multiculturalism and anti-racism in schools, contemporary Canadian sex education omits crucial…

Missing Strands? Dealing with Hair Loss

Science.gov (United States)

... 2017 Print this issue Missing Strands? Dealing with Hair Loss En español Send us your comments Hair loss is often associated with men and aging, but ... or their treatments, and many other things cause hair loss. The most common type of hair loss is ...

Anesthetic efficacy of a repeated intraosseous injection following a primary intraosseous injection.

Science.gov (United States)

Jensen, Joanne; Nusstein, John; Drum, Melissa; Reader, Al; Beck, Mike

2008-02-01

The purpose of this prospective, randomized, single-blinded study was to determine the anesthetic efficacy of a repeated intraosseous injection given 30 minutes after a primary intraosseous injection. Using a crossover design, 55 subjects randomly received a primary X-tip intraosseous injection (Dentsply Inc, York, PA) of 1.4 mL of 2% lidocaine with epinephrine (using the Wand; Milestone Scientific, Deerfield, IL) and a repeated intraosseous or mock injection at 30 minutes in two appointments. The first molar and adjacent teeth were pulp tested every 2 minutes for a total of 120 minutes. Success was defined as obtaining two consecutive 80 readings with the electric pulp tester. Success of the initial intraosseous injection was 100% for the first molar. The repeated intraosseous injection mimicked the initial intraosseous injection in terms of pulpal anesthesia and statistically provided another 15 minutes of pulpal anesthesia. In conclusion, using the methodology presented, repeating the intraosseous injection 30 minutes after an initial intraosseous injection will provide an additional 15 minutes of pulpal anesthesia.

The case of the missing third.

Science.gov (United States)

Robertson, Robin

2005-01-01

How is it that form arises out of chaos? In attempting to deal with this primary question, time and again a "Missing Third" is posited that lies between extremes. The problem of the "Missing Third" can be traced through nearly the entire history of thought. The form it takes, the problems that arise from it, the solutions suggested for resolving it, are each representative of an age. This paper traces the issue from Plato and Parmenides in the 4th--5th centuries, B.C.; to Neoplatonism in the 3rd--5th centuries; to Locke and Descartes in the 17th century; on to Berkeley and Kant in the 18th century; Fechner and Wundt in the 19th century; to behaviorism and Gestalt psychology, Jung, early in the 20th century, ethology and cybernetics later in the 20th century, then culminates late in the 20th century, with chaos theory.

Missing mass of the Universe

International Nuclear Information System (INIS)

Mazure, A.

1989-01-01

The first evidence for missing mass or dark matter comes from the 30's. On one hand, Oort noted that in the solar neighbourhood the mass of the stars (inferred from count numbers) cannot account for their observed velocities. On the other hand, observation on the sky of various galaxy condensations like the Coma cluster let suppose that they are actual bound systems and not only statistical fluctuations. However, with such an assumption, Zwicky concluded that the velocity dispersion of galaxies in Coma required 100 times more mass than contained in galaxies. Since this period, refined observations, analyses and a reevaluation of the cosmic distance scale reduced this factor but the problem is still present. It is particularly striking for spiral galaxies where systematic observations of rotation curves lead to infer the presence of spherical massive halos. These dynamical evidences form the first missing mass problem. The second one appears with the development of Great Unified Theories for which the natural laboratory is the very early Universe. A consequence of these theories is that our Universe could be closed by exotic particles which interact only gravitationally [fr

Known and missing left ventricular ejection fraction and survival in patients with heart failure

DEFF Research Database (Denmark)

Poppe, Katrina K; Squire, Iain B; Whalley, Gillian A

2013-01-01

Treatment of patients with heart failure (HF) relies on measurement of LVEF. However, the extent to which EF is recorded varies markedly. We sought to characterize the patient group that is missing a measure of EF, and to explore the association between missing EF and outcome.......Treatment of patients with heart failure (HF) relies on measurement of LVEF. However, the extent to which EF is recorded varies markedly. We sought to characterize the patient group that is missing a measure of EF, and to explore the association between missing EF and outcome....

Colistimethate Injection

Science.gov (United States)

... injection is in a class of medications called antibiotics. It works by killing bacteria.Antibiotics such as colistimethate injection will not work for colds, flu, or other viral infections. Using ...

Predicting appointment misses in hospitals using data analytics

Science.gov (United States)

Karpagam, Sylvia; Ma, Nang Laik

2017-01-01

Background There is growing attention over the last few years about non-attendance in hospitals and its clinical and economic consequences. There have been several studies documenting the various aspects of non-attendance in hospitals. Project Predicting Appoint Misses (PAM) was started with the intention of being able to predict the type of patients that would not come for appointments after making bookings. Methods Historic hospital appointment data merged with “distance from hospital” variable was used to run Logistic Regression, Support Vector Machine and Recursive Partitioning to decide the contributing variables to missed appointments. Results Variables that are “class”, “time”, “demographics” related have an effect on the target variable, however, prediction models may not perform effectively due to very subtle influence on the target variable. Previously assumed major contributors like “age”, “distance” did not have a major effect on the target variable. Conclusions With the given data it will be very difficult to make any moderate/strong prediction of the Appointment misses. That being said with the help of the cut off we are able to capture all of the “appointment misses” in addition to also capturing the actualized appointments. PMID:28567409

29 CFR 97.32 - Equipment.

Science.gov (United States)

2010-07-01

...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

44 CFR 13.32 - Equipment.

Science.gov (United States)

2010-10-01

...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

24 CFR 85.32 - Equipment.

Science.gov (United States)

2010-04-01

...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

43 CFR 12.72 - Equipment.

Science.gov (United States)

2010-10-01

...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

Injection Laryngoplasty Materials

OpenAIRE

Haldun Oðuz

2013-01-01

Injection laryngoplasty is one of the treatment options for voice problems. In the recent years, more safe and more biocompatible injection materials are available on the market. Long and short term injection materials are discussed in this review.

Glenohumeral Joint Injections

Science.gov (United States)

Gross, Christopher; Dhawan, Aman; Harwood, Daniel; Gochanour, Eric; Romeo, Anthony

2013-01-01

Context: Intra-articular injections into the glenohumeral joint are commonly performed by musculoskeletal providers, including orthopaedic surgeons, family medicine physicians, rheumatologists, and physician assistants. Despite their frequent use, there is little guidance for injectable treatments to the glenohumeral joint for conditions such as osteoarthritis, adhesive capsulitis, and rheumatoid arthritis. Evidence Acquisition: We performed a comprehensive review of the available literature on glenohumeral injections to help clarify the current evidence-based practice and identify deficits in our understanding. We searched MEDLINE (1948 to December 2011 [week 1]) and EMBASE (1980 to 2011 [week 49]) using various permutations of intra-articular injections AND (corticosteroid OR hyaluronic acid) and (adhesive capsulitis OR arthritis). Results: We identified 1 and 7 studies that investigated intra-articular corticosteroid injections for the treatment of osteoarthritis and adhesive capsulitis, respectively. Two and 3 studies investigated the use of hyaluronic acid in osteoarthritis and adhesive capsulitis, respectively. One study compared corticosteroids and hyaluronic acid injections in the treatment of osteoarthritis, and another discussed adhesive capsulitis. Conclusion: Based on existing studies and their level of evidence, there is only expert opinion to guide corticosteroid injection for osteoarthritis as well as hyaluronic acid injection for osteoarthritis and adhesive capsulitis. PMID:24427384

Injection Tests

CERN Document Server

Kain, V

2009-01-01

The success of the start-up of the LHC on 10th of September was in part due to the preparation without beam and injection tests in 2008. The injection tests allowed debugging and improvement in appropriate portions to allow safe, efficient and state-of-the-art commissioning later on. The usefulness of such an approach for a successful start-up becomes obvious when looking at the problems we encountered before and during the injection tests and could solve during this period. The outline of the preparation and highlights of the different injection tests will be presented and the excellent performance of many tools discussed. A list of shortcomings will follow, leading to some planning for the preparation of the run in 2009.

About the constructive and functional particularities of spark ignition engines with gasoline direct injection: experimental results

Science.gov (United States)

Niculae, M.; Ivan, F.; Neacsu, D.

2017-08-01

The paper aims to analyze and compare the environmental performances between a gasoline direct engine and a multi-point injection engine. There are analyzed the stages of emission formation during the New European Driving Cycle. The paper points out the dynamic, economic and environmental performances of spark ignition engines equipped with a GDI systems. Reason why, we believe the widespread implementation of this technology is today an immediate need.

Orthodontic Management of Congenitally Missing Maxillary Lateral Incisors: A Case Report

OpenAIRE

Paduano, Sergio; Cioffi, Iacopo; Rongo, Roberto; Cupo, Antonello; Bucci, Rosaria; Valletta, Rosa

2014-01-01

This case report describes the orthodontic treatment of a woman, aged 15 years, with permanent dentition, brachyfacial typology, with congenitally missing maxillary lateral incisors. Multibracket straightwire fixed appliance was used to open the space for dental implant placement, and treat the impaired occlusion. The missing lateral incisors were substituted with oral implants.

Satisfaction in motion: Subsequent search misses are more likely in moving search displays.

Science.gov (United States)

Stothart, Cary; Clement, Andrew; Brockmole, James R

2018-02-01

People often conduct visual searches in which multiple targets are possible (e.g., medical X-rays can contain multiple abnormalities). In this type of search, observers are more likely to miss a second target after having found a first one (a subsequent search miss). Recent evidence has suggested that this effect may be due to a depletion of cognitive resources from tracking the identities and locations of found targets. Given that tracking moving objects is resource-demanding, would finding a moving target further increase the chances of missing a subsequent one? To address this question, we had participants search for one or more targets hidden among distractors. Subsequent search misses were more likely when the targets and distractors moved throughout the display than when they remained stationary. However, when the found targets were highlighted in a unique color, subsequent search misses were no more likely in moving displays. Together, these results suggest that the effect of movement is likely due to the increased cognitive demands of tracking moving targets. Overall, our findings reveal that activities that involve searching for moving targets (e.g., driving) are more susceptible to subsequent search misses than are those that involve searching for stationary targets (e.g., baggage screening).

Meropenem Injection

Science.gov (United States)

... injection is in a class of medications called antibiotics. It works by killing bacteria that cause infection.Antibiotics such as meropenem injection will not work for colds, flu, or other viral infections. Taking ...

Chloramphenicol Injection

Science.gov (United States)

... injection is in a class of medications called antibiotics. It works by stopping the growth of bacteria..Antibiotics such as chloramphenicol injection will not work for colds, flu, or other viral infections. Taking ...

Professional experience and traffic accidents/near-miss accidents among truck drivers.

Science.gov (United States)

Girotto, Edmarlon; Andrade, Selma Maffei de; González, Alberto Durán; Mesas, Arthur Eumann

2016-10-01

To investigate the relationship between the time working as a truck driver and the report of involvement in traffic accidents or near-miss accidents. A cross-sectional study was performed with truck drivers transporting products from the Brazilian grain harvest to the Port of Paranaguá, Paraná, Brazil. The drivers were interviewed regarding sociodemographic characteristics, working conditions, behavior in traffic and involvement in accidents or near-miss accidents in the previous 12 months. Subsequently, the participants answered a self-applied questionnaire on substance use. The time of professional experience as drivers was categorized in tertiles. Statistical analyses were performed through the construction of models adjusted by multinomial regression to assess the relationship between the length of experience as a truck driver and the involvement in accidents or near-miss accidents. This study included 665 male drivers with an average age of 42.2 (±11.1) years. Among them, 7.2% and 41.7% of the drivers reported involvement in accidents and near-miss accidents, respectively. In fully adjusted analysis, the 3rd tertile of professional experience (>22years) was shown to be inversely associated with involvement in accidents (odds ratio [OR] 0.29; 95% confidence interval [CI] 0.16-0.52) and near-miss accidents (OR 0.17; 95% CI 0.05-0.53). The 2nd tertile of professional experience (11-22 years) was inversely associated with involvement in accidents (OR 0.63; 95% CI 0.40-0.98). An evident relationship was observed between longer professional experience and a reduction in reporting involvement in accidents and near-miss accidents, regardless of age, substance use, working conditions and behavior in traffic. Copyright © 2016 Elsevier Ltd. All rights reserved.

Ma_MISS on ExoMars: Mineralogical Characterization of the Martian Subsurface

Science.gov (United States)

De Sanctis, Maria Cristina; Altieri, Francesca; Ammannito, Eleonora; Biondi, David; De Angelis, Simone; Meini, Marco; Mondello, Giuseppe; Novi, Samuele; Paolinetti, Riccardo; Soldani, Massimo; Mugnuolo, Raffaele; Pirrotta, Simone; Vago, Jorge L.; Ma_MISS Team

2017-07-01

The Ma_MISS (Mars Multispectral Imager for Subsurface Studies) experiment is the visible and near infrared (VNIR) miniaturized spectrometer hosted by the drill system of the ExoMars 2020 rover. Ma_MISS will perform IR spectral reflectance investigations in the 0.4-2.2 μm range to characterize the mineralogy of excavated borehole walls at different depths (between 0 and 2 m). The spectral sampling is about 20 nm, whereas the spatial resolution over the target is 120 μm. Making use of the drill's movement, the instrument slit can scan a ring and build up hyperspectral images of a borehole. The main goal of the Ma_MISS instrument is to study the martian subsurface environment. Access to the martian subsurface is crucial to our ability to constrain the nature, timing, and duration of alteration and sedimentation processes on Mars, as well as habitability conditions. Subsurface deposits likely host and preserve H2O ice and hydrated materials that will contribute to our understanding of the H2O geochemical environment (both in the liquid and in the solid state) at the ExoMars 2020 landing site. The Ma_MISS spectral range and sampling capabilities have been carefully selected to allow the study of minerals and ices in situ before the collection of samples. Ma_MISS will be implemented to accomplish the following scientific objectives: (1) determine the composition of subsurface materials, (2) map the distribution of subsurface H2O and volatiles, (3) characterize important optical and physical properties of materials (e.g., grain size), and (4) produce a stratigraphic column that will inform with regard to subsurface geological processes. The Ma_MISS findings will help to refine essential criteria that will aid in our selection of the most interesting subsurface formations from which to collect samples.

Orthodontic Management of Congenitally Missing Maxillary Lateral Incisors: A Case Report

Directory of Open Access Journals (Sweden)

Sergio Paduano

2014-01-01

Full Text Available This case report describes the orthodontic treatment of a woman, aged 15 years, with permanent dentition, brachyfacial typology, with congenitally missing maxillary lateral incisors. Multibracket straightwire fixed appliance was used to open the space for dental implant placement, and treat the impaired occlusion. The missing lateral incisors were substituted with oral implants.

Worldwide Injection Technique Questionnaire Study: Population Parameters and Injection Practices.

Science.gov (United States)

Frid, Anders H; Hirsch, Laurence J; Menchior, Astrid R; Morel, Didier R; Strauss, Kenneth W

2016-09-01

From February 1, 2014, through June 30, 2015, 13,289 insulin-injecting patients from 423 centers in 42 countries took part in one of the largest surveys ever performed in diabetes. The goal was to assess patient characteristics, as well as historical and practical aspects of their injection technique. Results show that 4- and 8-mm needle lengths are each used by nearly 30% of patients and 5- and 6-mm needles each by approximately 20%. Higher consumption of insulin (as measured by total daily dose) is associated with having lipohypertrophy (LH), injecting into LH, leakage from the injection site, and failing to reconstitute cloudy insulin. Glycated hemoglobin values are, on average, 0.5% higher in patients with LH and are significantly higher with incorrect rotation of sites and with needle reuse. Glycated hemoglobin values are lower in patients who distribute their injections over larger injection areas and whose sites are inspected routinely. The frequencies of unexpected hypoglycemia and glucose variability are significantly higher in those with LH, those injecting into LH, those who incorrectly rotate sites, and those who reuse needles. Needles associated with diabetes treatment are the most commonly used medical sharps in the world. However, correct disposal of sharps after use is critically suboptimal. Many used sharps end up in public trash and constitute a major accidental needlestick risk. Use of these data should stimulate renewed interest in and commitment to optimizing injection practices in patients with diabetes. Copyright © 2016 Mayo Foundation for Medical Education and Research. Published by Elsevier Inc. All rights reserved.

Granisetron Injection

Science.gov (United States)

Granisetron immediate-release injection is used to prevent nausea and vomiting caused by cancer chemotherapy and to ... nausea and vomiting that may occur after surgery. Granisetron extended-release (long-acting) injection is used with ...

Edaravone Injection

Science.gov (United States)

Edaravone injection is used to treat amyotrophic lateral sclerosis (ALS, Lou Gehrig's disease; a condition in which ... die, causing the muscles to shrink and weaken). Edaravone injection is in a class of medications called ...

Defibrotide Injection

Science.gov (United States)

Defibrotide injection is used to treat adults and children with hepatic veno-occlusive disease (VOD; blocked blood ... the body and then returned to the body). Defibrotide injection is in a class of medications called ...

Nalbuphine Injection

Science.gov (United States)

... injection is in a class of medications called opioid agonist-antagonists. It works by changing the way ... suddenly stop using nalbuphine injection, you may experience withdrawal symptoms including restlessness; teary eyes; runny nose; yawning; ...

Social Media Use and the Fear of Missing out (FoMO) While Studying Abroad

Science.gov (United States)

Hetz, Patricia R.; Dawson, Christi L.; Cullen, Theresa A.

2015-01-01

Fear of Missing Out (FoMO) is a social construct that examines whether students are concerned that they are missing out on experiences that others are having, and we examined this relation to their concerns over missing activities in their home culture. This mixed-methods pilot study sought to determine how social media affects the study abroad…

Dealing with missing data in a multi-question depression scale: a comparison of imputation methods

Directory of Open Access Journals (Sweden)

Stuart Heather

2006-12-01

Full Text Available Abstract Background Missing data present a challenge to many research projects. The problem is often pronounced in studies utilizing self-report scales, and literature addressing different strategies for dealing with missing data in such circumstances is scarce. The objective of this study was to compare six different imputation techniques for dealing with missing data in the Zung Self-reported Depression scale (SDS. Methods 1580 participants from a surgical outcomes study completed the SDS. The SDS is a 20 question scale that respondents complete by circling a value of 1 to 4 for each question. The sum of the responses is calculated and respondents are classified as exhibiting depressive symptoms when their total score is over 40. Missing values were simulated by randomly selecting questions whose values were then deleted (a missing completely at random simulation. Additionally, a missing at random and missing not at random simulation were completed. Six imputation methods were then considered; 1 multiple imputation, 2 single regression, 3 individual mean, 4 overall mean, 5 participant's preceding response, and 6 random selection of a value from 1 to 4. For each method, the imputed mean SDS score and standard deviation were compared to the population statistics. The Spearman correlation coefficient, percent misclassified and the Kappa statistic were also calculated. Results When 10% of values are missing, all the imputation methods except random selection produce Kappa statistics greater than 0.80 indicating 'near perfect' agreement. MI produces the most valid imputed values with a high Kappa statistic (0.89, although both single regression and individual mean imputation also produced favorable results. As the percent of missing information increased to 30%, or when unbalanced missing data were introduced, MI maintained a high Kappa statistic. The individual mean and single regression method produced Kappas in the 'substantial agreement' range

Causal inference with missing exposure information: Methods and applications to an obstetric study.

Science.gov (United States)

Zhang, Zhiwei; Liu, Wei; Zhang, Bo; Tang, Li; Zhang, Jun

2016-10-01

Causal inference in observational studies is frequently challenged by the occurrence of missing data, in addition to confounding. Motivated by the Consortium on Safe Labor, a large observational study of obstetric labor practice and birth outcomes, this article focuses on the problem of missing exposure information in a causal analysis of observational data. This problem can be approached from different angles (i.e. missing covariates and causal inference), and useful methods can be obtained by drawing upon the available techniques and insights in both areas. In this article, we describe and compare a collection of methods based on different modeling assumptions, under standard assumptions for missing data (i.e. missing-at-random and positivity) and for causal inference with complete data (i.e. no unmeasured confounding and another positivity assumption). These methods involve three models: one for treatment assignment, one for the dependence of outcome on treatment and covariates, and one for the missing data mechanism. In general, consistent estimation of causal quantities requires correct specification of at least two of the three models, although there may be some flexibility as to which two models need to be correct. Such flexibility is afforded by doubly robust estimators adapted from the missing covariates literature and the literature on causal inference with complete data, and by a newly developed triply robust estimator that is consistent if any two of the three models are correct. The methods are applied to the Consortium on Safe Labor data and compared in a simulation study mimicking the Consortium on Safe Labor. © The Author(s) 2013.

Missing value imputation in DNA microarrays based on conjugate gradient method.

Science.gov (United States)

Dorri, Fatemeh; Azmi, Paeiz; Dorri, Faezeh

2012-02-01

Analysis of gene expression profiles needs a complete matrix of gene array values; consequently, imputation methods have been suggested. In this paper, an algorithm that is based on conjugate gradient (CG) method is proposed to estimate missing values. k-nearest neighbors of the missed entry are first selected based on absolute values of their Pearson correlation coefficient. Then a subset of genes among the k-nearest neighbors is labeled as the best similar ones. CG algorithm with this subset as its input is then used to estimate the missing values. Our proposed CG based algorithm (CGimpute) is evaluated on different data sets. The results are compared with sequential local least squares (SLLSimpute), Bayesian principle component analysis (BPCAimpute), local least squares imputation (LLSimpute), iterated local least squares imputation (ILLSimpute) and adaptive k-nearest neighbors imputation (KNNKimpute) methods. The average of normalized root mean squares error (NRMSE) and relative NRMSE in different data sets with various missing rates shows CGimpute outperforms other methods. Copyright © 2011 Elsevier Ltd. All rights reserved.

The features of endometrium receptor apparatus in women with missed abortion

Directory of Open Access Journals (Sweden)

Александра Николаевна Тищенко

2015-05-01

Full Text Available A new complex of modern methods of investigation, both the endometrium and immune system changes in local and hormonal status is developed in this article, rehabilitation of reproductive function in patients with the missed abortion is proposed.Methods. The study involved 124 women, including 64 women with diagnosed missed abortion. The comparison group included 30 women with physiological pregnancy who were performed artificial abortion. 30 healthy women in pregravidae period were examined. The clinical and anamnestic, histological and immunological features of the endometrium and its functional activity were investigated.Results. Pathogenetic mechanisms of menstrual dysfunction were defined in women with the missed abortion. The changes in the secretory transformation of the endometrium, a sharp decrease in its receptor and functional activity, confirming the lack of development of the luteal phase are observed. Based on the research, an algorithm for the restoration of menstrual function in women in the postgravidae period is developed and implemented in practice.Conclusions. The data confirmed the feasibility of implementing the proposed examination and treatment of women with the missed abortion

Obstetric near-miss and maternal mortality in maternity university hospital, Damascus, Syria: a retrospective study

Directory of Open Access Journals (Sweden)

Al Chamat Ahmad

2010-10-01

Full Text Available Abstract Background Investigating severe maternal morbidity (near-miss is a newly recognised tool that identifies women at highest risk of maternal death and helps allocate resources especially in low income countries. This study aims to i. document the frequency and nature of maternal near-miss at hospital level in Damascus, Capital of Syria, ii. evaluate the level of care at maternal life-saving emergency services by comparatively analysing near-misses and maternal mortalities. Methods Retrospective facility-based review of cases of near-miss and maternal mortality that took place in the years 2006-2007 at Damascus Maternity University Hospital, Syria. Near-miss cases were defined based on disease-specific criteria (Filippi 2005 including: haemorrhage, hypertensive disorders in pregnancy, dystocia, infection and anaemia. Main outcomes included maternal mortality ratio (MMR, maternal near miss ratio (MNMR, mortality indices and proportion of near-miss cases and mortality cases to hospital admissions. Results There were 28 025 deliveries, 15 maternal deaths and 901 near-miss cases. The study showed a MNMR of 32.9/1000 live births, a MMR of 54.8/100 000 live births and a relatively low mortality index of 1.7%. Hypertensive disorders (52% and haemorrhage (34% were the top causes of near-misses. Late pregnancy haemorrhage was the leading cause of maternal mortality (60% while sepsis had the highest mortality index (7.4%. Most cases (93% were referred in critical conditions from other facilities; namely traditional birth attendants homes (67%, primary (5% and secondary (10% healthcare unites and private practices (11%. 26% of near-miss cases were admitted to Intensive Care Unit (ICU. Conclusion Near-miss analyses provide valuable information on obstetric care. The study highlights the need to improve antenatal care which would help early identification of high risk pregnancies. It also emphasises the importance of both: developing protocols to

Obstetric near-miss and maternal mortality in maternity university hospital, Damascus, Syria: a retrospective study.

Science.gov (United States)

Almerie, Yara; Almerie, Muhammad Q; Matar, Hosam E; Shahrour, Yasser; Al Chamat, Ahmad Abo; Abdulsalam, Asmaa

2010-10-19

Investigating severe maternal morbidity (near-miss) is a newly recognised tool that identifies women at highest risk of maternal death and helps allocate resources especially in low income countries. This study aims to i. document the frequency and nature of maternal near-miss at hospital level in Damascus, Capital of Syria, ii. evaluate the level of care at maternal life-saving emergency services by comparatively analysing near-misses and maternal mortalities. Retrospective facility-based review of cases of near-miss and maternal mortality that took place in the years 2006-2007 at Damascus Maternity University Hospital, Syria. Near-miss cases were defined based on disease-specific criteria (Filippi 2005) including: haemorrhage, hypertensive disorders in pregnancy, dystocia, infection and anaemia. Main outcomes included maternal mortality ratio (MMR), maternal near miss ratio (MNMR), mortality indices and proportion of near-miss cases and mortality cases to hospital admissions. There were 28,025 deliveries, 15 maternal deaths and 901 near-miss cases. The study showed a MNMR of 32.9/1000 live births, a MMR of 54.8/100,000 live births and a relatively low mortality index of 1.7%. Hypertensive disorders (52%) and haemorrhage (34%) were the top causes of near-misses. Late pregnancy haemorrhage was the leading cause of maternal mortality (60%) while sepsis had the highest mortality index (7.4%). Most cases (93%) were referred in critical conditions from other facilities; namely traditional birth attendants homes (67%), primary (5%) and secondary (10%) healthcare unites and private practices (11%). 26% of near-miss cases were admitted to Intensive Care Unit (ICU). Near-miss analyses provide valuable information on obstetric care. The study highlights the need to improve antenatal care which would help early identification of high risk pregnancies. It also emphasises the importance of both: developing protocols to prevent/manage post-partum haemorrhage and training health

Missed opportunities for immunisation at Kasungu

African Journals Online (AJOL)

work. Some outreach and static clinics still concen- trate their EPI activities on infants and children and largely ignore the mothers who accompany them. Health workers ... sungu District Hospital (KDH) were surveyed. Six. Health Centres ... Table 2 Missed Dpponunities for Immunisation ofEPI Tat'get Gt'Oups at Kmungu ...

Piezoelectric Injection Systems

Science.gov (United States)

Mock, R.; Lubitz, K.

The origin of direct injection can be doubtlessly attributed to Rudolf Diesel who used air assisted injection for fuel atomisation in his first self-ignition engine. Although it became apparent already at that time that direct injection leads to reduced specific fuel consumption compared to other methods of fuel injection, it was not used in passenger cars for the moment because of its disadvantageous noise generation as the requirements with regard to comfort were seen as more important than a reduced specific consumption.

Remote handling equipment

International Nuclear Information System (INIS)

Clement, G.

1984-01-01

After a definition of intervention, problems encountered for working in an adverse environment are briefly analyzed for development of various remote handling equipments. Some examples of existing equipments are given [fr

Facebook intrusion, fear of missing out, narcissism, and life satisfaction: A cross-sectional study.

Science.gov (United States)

Błachnio, Agata; Przepiórka, Aneta

2018-01-01

Facebook is one of the most popular social networking sites. The present paper examines the relations between fear of missing out, narcissism, Facebook intrusion, and life satisfaction. We hypothesized that the fear of missing out and narcissism would play a significant role in Facebook intrusion. The participants in the study were 360 Polish users of Facebook. We administered the Facebook Intrusion Scale, the Fear of Missing Out Scale, the Narcissistic Personality Inventory, and the Satisfaction with Life Scale. The results showed that a high level of fear of missing out and high narcissism are predictors of Facebook intrusion, while a low level of fear of missing out and high narcissism are related to satisfaction with life. Our findings provide a more comprehensive picture of the predictors of Facebook intrusion and reveal interesting patterns. Copyright © 2017 Elsevier B.V. All rights reserved.

Superconducting technology for overcurrent limiting in a 25 kA current injection system

Energy Technology Data Exchange (ETDEWEB)

Heydari, Hossein; Faghihi, Faramarz; Sharifi, Reza; Poursoltanmohammadi, Amir Hossein [Center of Excellence for Power System Automation and Operation, Electrical Engineering Department, Iran University of Science and Technology (IUST), Tehran (Iran, Islamic Republic of)], E-mail: heydari@iust.ac.ir, E-mail: faramarz_faghihi@ee.iust.ac.ir, E-mail: reza_sharifi@ee.iust.ac.ir, E-mail: amirhosseinp@ee.iust.ac.ir

2008-09-15

Current injection transformer (CIT) systems are within the major group of the standard type test of high current equipment in the electrical industry, so their performance becomes very important. When designing high current systems, there are many factors to be considered from which their overcurrent protection must be ensured. The output of a CIT is wholly dependent on the impedance of the equipment under test (EUT). Therefore current flow beyond the allowable limit can occur. The present state of the art provides an important guide to developing current limiters not only for the grid application but also in industrial equipment. This paper reports the state of the art in the technology available that could be developed into an application of superconductivity for high current equipment (CIT) protection with no test disruption. This will result in a greater market choice and lower costs for equipment protection solutions, reduced costs and improved system reliability. The paper will also push the state of the art by using two distinctive circuits, closed-core and open-core, for overcurrent protection of a 25 kA CIT system, based on a flux-lock-type superconducting fault current limiter (SFCL) and magnetic properties of high temperature superconducting (HTS) elements. An appropriate location of the HTS element will enhance the rate of limitation with the help of the magnetic field generated by the CIT output busbars. The calculation of the HTS parameters for overcurrent limiting is also performed to suit the required current levels of the CIT.

Superconducting technology for overcurrent limiting in a 25 kA current injection system

Science.gov (United States)

Heydari, Hossein; Faghihi, Faramarz; Sharifi, Reza; Poursoltanmohammadi, Amir Hossein

2008-09-01

Current injection transformer (CIT) systems are within the major group of the standard type test of high current equipment in the electrical industry, so their performance becomes very important. When designing high current systems, there are many factors to be considered from which their overcurrent protection must be ensured. The output of a CIT is wholly dependent on the impedance of the equipment under test (EUT). Therefore current flow beyond the allowable limit can occur. The present state of the art provides an important guide to developing current limiters not only for the grid application but also in industrial equipment. This paper reports the state of the art in the technology available that could be developed into an application of superconductivity for high current equipment (CIT) protection with no test disruption. This will result in a greater market choice and lower costs for equipment protection solutions, reduced costs and improved system reliability. The paper will also push the state of the art by using two distinctive circuits, closed-core and open-core, for overcurrent protection of a 25 kA CIT system, based on a flux-lock-type superconducting fault current limiter (SFCL) and magnetic properties of high temperature superconducting (HTS) elements. An appropriate location of the HTS element will enhance the rate of limitation with the help of the magnetic field generated by the CIT output busbars. The calculation of the HTS parameters for overcurrent limiting is also performed to suit the required current levels of the CIT.

Superconducting technology for overcurrent limiting in a 25 kA current injection system

International Nuclear Information System (INIS)

Heydari, Hossein; Faghihi, Faramarz; Sharifi, Reza; Poursoltanmohammadi, Amir Hossein

2008-01-01

Current injection transformer (CIT) systems are within the major group of the standard type test of high current equipment in the electrical industry, so their performance becomes very important. When designing high current systems, there are many factors to be considered from which their overcurrent protection must be ensured. The output of a CIT is wholly dependent on the impedance of the equipment under test (EUT). Therefore current flow beyond the allowable limit can occur. The present state of the art provides an important guide to developing current limiters not only for the grid application but also in industrial equipment. This paper reports the state of the art in the technology available that could be developed into an application of superconductivity for high current equipment (CIT) protection with no test disruption. This will result in a greater market choice and lower costs for equipment protection solutions, reduced costs and improved system reliability. The paper will also push the state of the art by using two distinctive circuits, closed-core and open-core, for overcurrent protection of a 25 kA CIT system, based on a flux-lock-type superconducting fault current limiter (SFCL) and magnetic properties of high temperature superconducting (HTS) elements. An appropriate location of the HTS element will enhance the rate of limitation with the help of the magnetic field generated by the CIT output busbars. The calculation of the HTS parameters for overcurrent limiting is also performed to suit the required current levels of the CIT

Application of pattern mixture models to address missing data in longitudinal data analysis using SPSS.

Science.gov (United States)

Son, Heesook; Friedmann, Erika; Thomas, Sue A

2012-01-01

Longitudinal studies are used in nursing research to examine changes over time in health indicators. Traditional approaches to longitudinal analysis of means, such as analysis of variance with repeated measures, are limited to analyzing complete cases. This limitation can lead to biased results due to withdrawal or data omission bias or to imputation of missing data, which can lead to bias toward the null if data are not missing completely at random. Pattern mixture models are useful to evaluate the informativeness of missing data and to adjust linear mixed model (LMM) analyses if missing data are informative. The aim of this study was to provide an example of statistical procedures for applying a pattern mixture model to evaluate the informativeness of missing data and conduct analyses of data with informative missingness in longitudinal studies using SPSS. The data set from the Patients' and Families' Psychological Response to Home Automated External Defibrillator Trial was used as an example to examine informativeness of missing data with pattern mixture models and to use a missing data pattern in analysis of longitudinal data. Prevention of withdrawal bias, omitted data bias, and bias toward the null in longitudinal LMMs requires the assessment of the informativeness of the occurrence of missing data. Missing data patterns can be incorporated as fixed effects into LMMs to evaluate the contribution of the presence of informative missingness to and control for the effects of missingness on outcomes. Pattern mixture models are a useful method to address the presence and effect of informative missingness in longitudinal studies.

The Effectiveness of Supermarket Posters in Helping to Find Missing Children

Science.gov (United States)

Lampinen, James Michael; Arnal, Jack; Hicks, Jason L.

2009-01-01

One approach used to help find missing children is to place posters of them at the exits of supermarkets. The present research addresses the question of how effective that approach is likely to be. Posters of 8 missing children were displayed on a bulletin board at a cooperating grocery store. Customers leaving the store completed a survey and…

Are We Really Missing Small Galaxies?

Science.gov (United States)

Kohler, Susanna

2018-02-01

One long-standing astrophysical puzzle is that of so-called missing dwarf galaxies: the number of small dwarf galaxies that we observe is far fewer than that predicted by theory. New simulations, however, suggest that perhaps theres no mystery after all.Missing DwarfsDark-matter cosmological simulations predict many small galaxy halos for every large halo that forms. [The Via Lactea project]Models of a lambda-cold-dark-matter (CDM) universe predict the distribution of galaxy halo sizes throughout the universe, suggesting there should be many more small galaxies than large ones. In what has become known as the missing dwarf problem, however, we find that while we observe the expected numbers of galaxies at the larger end of the scale, we dont see nearly enough small galaxies to match the predictions.Are these galaxies actually missing? Are our predictions wrong? Or are the galaxies there and were just not spotting them? A recent study led by Alyson Brooks (Rutgers University) uses new simulations to explore whatscausing the difference between theory and observation.The fraction of detectable halos as a function of velocity, according to the authors simulations. Below 35 km/s, the detectability of the galaxies drops precipitously. [Brooks et al. 2017]Simulating Galactic VelocitiesBecause we cant weigh a galaxy directly, one proxy used for galaxy mass is its circular velocity; the more massive a galaxy, the faster gas and stars rotate around its center. The discrepancy between models and observations lies in whats known as the galaxy velocity function, which describes the number density of galaxies for a given circular velocity. While theory and observations agree for galaxies with circular velocities above 100 km/s, theory predicts far more dwarfs below this velocity than we observe.To investigate this problem, Brooks and collaborators ran a series of cosmological simulations based on our understanding of a CDM universe. Instead of exploring the result using only

Idling operation apparatus for multicylinder fuel injection engine

Energy Technology Data Exchange (ETDEWEB)

Kanahira, A

1974-11-20

A device to cut off the fuel supply to a number of cylinders at idling is described for those engines equipped with multicylinder fuel injection systems. The discontinuation of the fuel gas supply to the cylinders is made by a magnetically operated valve which is related to the accelerator. When the engine is idling, a switch activates the magnetic valve and the tube leading to the cylinder closes while a valve on the tube leading to a dual tank opens, and the pumped gas returns to the tank. This valve is installed on several cylinders, but not on all. Thus, at idling only a certain number of cylinders are firing, which lowers the hydrocarbon levels in the exhaust gas since non-firing cylinders intake and discharge only air.

First experience with carbon stripping foils for the 160 MeV H- injection into the CERN PSB

Science.gov (United States)

Weterings, Wim; Bracco, Chiara; Jorat, Louise; Noulibos, Remy; van Trappen, Pieter

2018-05-01

160 MeV H- beam will be delivered from the new CERN linear accelerator (Linac4) to the Proton Synchrotron Booster (PSB), using a H- charge-exchange injection system. A 200 µg/cm2 carbon stripping foil will convert H- into protons by stripping off the electrons. The H- charge-exchange injection principle will be used for the first time in the CERN accelerator complex and involves many challenges. In order to gain experience with the foil changing mechanism and the very fragile foils, in 2016, prior to the installation in the PSB, a stripping foil test stand has been installed in the Linac4 transfer line. In addition, parts of the future PSB injection equipment are also temporarily installed in the Linac4 transfer line for tests with a 160 MeV H- commissioning proton beam. This paper describes the foil changing mechanism and control system, summarizes the practical experience of gluing and handling these foils and reports on the first results with beam.

Replacement of missing tooth in esthetic zone with implant-supported fixed prosthesis

Directory of Open Access Journals (Sweden)

Sunil Kumar Mishra

2017-01-01

Full Text Available In the anterior region, the common reason for tooth loss is due to traumatic injury or congenital anomaly. Loss of a single tooth may cause functional and esthetic deficits to the patient. There are different treatment options available for replacing a missing incisor. Implant dentistry should be considered as first treatment alternative for replace a missing tooth. This case report presents the replacement of a missing maxillary left central incisor in a compromised site with dental implants along with bone graft followed by frenectomy to obtain a good clinical result and for better function and esthetics of the patient.

Mac OS X : Tiger edition the missing manual

CERN Document Server

Pogue, David

2005-01-01

You can set your watch to it: As soon as Apple comes out with another version of Mac OS X, David Pogue hits the streets with another meticulous Missing Manual to cover it with a wealth of detail. The new Mac OS X 10.4, better known as Tiger, is faster than its predecessors, but nothing's too fast for Pogue and Mac OS X: The Missing Manual. There are many reasons why this is the most popular computer book of all time. With its hallmark objectivity, the Tiger Edition thoroughly explores the latest features to grace the Mac OS. Which ones work well and which do not? What should you look for? Th

A comparison of molding procedures - Contact, injection and vacuum injection

Science.gov (United States)

Cathiard, G.

1980-06-01

The technical and economic aspects of the contact, injection and vacuum injection molding of reinforced plastic components are compared for the example of a tractor roof with a gel-coated surface. Consideration is given to the possibility of reinforcement, number of smooth faces, condition of the gel-coated surface, reliability, and labor and workplace requirements of the three processes, and advantages of molding between the mold and a countermold in smooth faces, reliability, labor requirements, working surface and industrial hygiene are pointed out. The times and labor requirements of each step in the molding cycles are examined, and material requirements and yields, investment costs, amortization and product cost prices of the processes are compared. It is concluded that, for the specific component examined, the processes of vacuum injection and injection molding appear very interesting, with injection molding processes resulting in lower cost prices than contact molding for any production volume.

Learning-Based Adaptive Imputation Methodwith kNN Algorithm for Missing Power Data

Directory of Open Access Journals (Sweden)

Minkyung Kim

2017-10-01

Full Text Available This paper proposes a learning-based adaptive imputation method (LAI for imputing missing power data in an energy system. This method estimates the missing power data by using the pattern that appears in the collected data. Here, in order to capture the patterns from past power data, we newly model a feature vector by using past data and its variations. The proposed LAI then learns the optimal length of the feature vector and the optimal historical length, which are significant hyper parameters of the proposed method, by utilizing intentional missing data. Based on a weighted distance between feature vectors representing a missing situation and past situation, missing power data are estimated by referring to the k most similar past situations in the optimal historical length. We further extend the proposed LAI to alleviate the effect of unexpected variation in power data and refer to this new approach as the extended LAI method (eLAI. The eLAI selects a method between linear interpolation (LI and the proposed LAI to improve accuracy under unexpected variations. Finally, from a simulation under various energy consumption profiles, we verify that the proposed eLAI achieves about a 74% reduction of the average imputation error in an energy system, compared to the existing imputation methods.

Prevalence of injections and knowledge of safe injections among rural residents in Central China.

Science.gov (United States)

Yan, Y W; Yan, J; Zhang, G P; Gao, Z L; Jian, H X

2007-08-01

Abuse of the injection services, namely unnecessary injections and unsafe injections, exists extensively in developing countries. Unsafe injection practices contribute to the transmission of blood-borne pathogens. The aims of this study were to survey the prevalence of injections and knowledge of injection safety among the rural residents in Jingzhou district, Hubei, China and to provide scientific data for developing a health educational programme. A retrospective cross-sectional study was conducted in 12 villages, which were selected from the Jingzhou district by the random sampling method. 50 rural residents were interviewed per village using a questionnaire. Among the 595 residents studied, 192 had received at least one injection in the past three months, with an injection prevalence of 32.3 percent and an average of 0.93 injections. 90.3 percent of the rural residents knew that unsafe injections could transmit the following blood-borne pathogens: human immunodeficiency virus (74.4 percent), hepatitis B virus (55.8 percent) and hepatitis C virus (22.9 percent). Logistic regression analysis showed that the residents' age, educational level and residential area were important factors in influencing their knowledge about injection safety. The results indicated that the injection prevalence was high among rural residents in the study area, and their knowledge regarding injection safety should be further improved.

Used energy-related laboratory equipment grant program for institutions of higher learning. Eligible equipment catalog

Energy Technology Data Exchange (ETDEWEB)

1994-07-01

This is a listing of energy related equipment available through the Energy-Related Laboratory Equipment Grant Program which grants used equipment to institutions of higher education for energy-related research. Information included is an overview of the program, how to apply for a grant of equipment, eligibility requirements, types of equipment available, and the costs for the institution.

Equipment repair in coal mines

Energy Technology Data Exchange (ETDEWEB)

Zhang, S

1982-01-01

Most equipment in Chinese coal mines consists of machinery and equipment produced in the 1950s; the efficiency of 4-62, CTD-57 and 70B/sub 2/ ventilators is 15% lower than that of new ones; that of SSM and AYaP pumps, 10% lower than of modern ones. Equipment renovation is done in three ways: replacing obsolete equipment with new equipment of the same type; improving the performance of existing equipment by introducing efficiency and reconstruction; and replacing obsolete equipment with advanced equipment. It is indicated that the second way, for example, replacement of 4-62 ventilator blades with a maximum efficiency of 73% by 4-72 ventilator blades raises its efficiency to 90%. Replacing the 8DA-8x3 water pump, having a maximum efficiency of 63%, with the 200D 43x3 pump with a maximum efficiency of 78%, enables an electricity savings of 7000 yuan per year, which exceeds all replacement costs (600 yuan). The need to improve equipment maintenance and preventive work to increase equipment service life and to introduce new techniques and efficiency is noted.

Injection-controlled laser resonator

Science.gov (United States)

Chang, J.J.

1995-07-18

A new injection-controlled laser resonator incorporates self-filtering and self-imaging characteristics with an efficient injection scheme. A low-divergence laser signal is injected into the resonator, which enables the injection signal to be converted to the desired resonator modes before the main laser pulse starts. This injection technique and resonator design enable the laser cavity to improve the quality of the injection signal through self-filtering before the main laser pulse starts. The self-imaging property of the present resonator reduces the cavity induced diffraction effects and, in turn, improves the laser beam quality. 5 figs.

Retention of 99mTc-bicisate in the human brain after intracarotid injection

DEFF Research Database (Denmark)

Friberg, L; Andersen, A R; Lassen, N A

1994-01-01

99mTc-bicisate (ECD) was injected as a bolus into the internal carotid artery, and cerebral uptake and retention were recorded with fast-rotating single photon emission computed tomography (SPECT) equipment in four patients suffering from temporal lobe epilepsy. Quantitative regional cerebral blood...... flow (rCBF) was measured tomographically with the 133Xe inhalation technique. We applied a three-compartment kinetic model and algorithms modified from a previous analysis of 99mTc d,l-hexamethylpropyleneamine oxide (HM-PAO) kinetics. The bicisate brain uptake and retention curve was very similar...

MISSE 6 Stressed Polymers Experiment Atomic Oxygen Erosion Data

Science.gov (United States)

deGroh, Kim K.; Banks, Bruce A.; Mitchell, Gianna G.; Yi, Grace T.; Guo, Aobo; Ashmeade, Claire C.; Roberts, Lily M.; McCarthy, Catherine E.; Sechkar, Edward A.

2013-01-01

Polymers and other oxidizable materials used on the exterior of spacecraft in the low Earth orbit (LEO) space environment can be eroded away by reaction with atomic oxygen (AO). For spacecraft design, it is important to know the LEO AO erosion yield, Ey (volume loss per incident oxygen atom), of materials susceptible to AO erosion. The Stressed Polymers Experiment was developed and flown as part of the Materials International Space Station Experiment 6 (MISSE 6) to compare the AO erosion yields of stressed and non-stressed polymers to determine if erosion is dependent upon stress while in LEO. The experiment contained 36 thin film polymer samples that were exposed to ram AO for 1.45 years. This paper provides an overview of the Stressed Polymers Experiment with details on the polymers flown, the characterization techniques used, the AO fluence, and the erosion yield results. The MISSE 6 data are compared to data for similar samples flown on previous MISSE missions to determine fluence or solar radiation effects on erosion yield.

The impact of 'missed care' on the professional socialisation of nursing students: A qualitative research study.

Science.gov (United States)

Gibbon, Bernard; Crane, Julie

2018-04-07

Missed care is a recently described concept that is subject to an increasing amount of international nursing research. The impact of missed care is associated with poorer patient outcomes (mortality and morbidity) and poorer levels of patient satisfaction with the services provided by the hospital. Missed care has also been linked to decreased staff satisfaction and increased intention to leave. Overall disaffection amongst registered nurses has also been reported. Professional socialisation refers to the acquisition of behaviours within cultural norms, and it has been suggested that students enter a period of professional socialisation during their programme. Whilst it has been proposed that students may absorb the characteristics of those around them, to date, no empirical studies have reported the impact of missed care on student nurses. The aim of this project is to explore the impact of missed care on the professional socialisation of student nurses. A qualitative study was undertaken in one higher education institute in UK with final year pre-registration nursing degree (adult field) students. Focus group interviews, utilizing a broad topic guide, were used to collect data which was analysed using thematic analysis. Student nurses were aware that some planned care is missed and these findings resonated with those identified in the literature. In addition to illuminating aspects of professional socialisation, analysis yielded five themes with regards to missed care: awareness, rationale, impact, strategies to avoid and influence of missed care on career aspiration. Student nurses exposed to missed care appear to accept this as part of their professional socialisation. With regards to professional socialisation, student nurses developed a pragmatic acceptance that care would be missed and that this could happen in any environment. As such they did not see missed care as influencing their career aspirations. Copyright © 2018 Elsevier Ltd. All rights reserved.

BP volume reduction equipment

International Nuclear Information System (INIS)

Kitamura, Yoshinori; Muroo, Yoji; Hamanaka, Isao

2003-01-01

A new type of burnable poison (BP) volume reduction system is currently being developed. Many BP rods, a subcomponent of spent fuel assemblies are discharged from nuclear power reactors. This new system reduces the overall volume of BP rods. The main system consists of BP rod cutting equipment, equipment for the recovery of BP cut pieces, and special transport equipment for the cut rods. The equipment is all operated by hydraulic press cylinders in water to reduce operator exposure to radioactivity. (author)

Exercise Equipment: Neutral Buoyancy

Science.gov (United States)

Shackelford, Linda; Valle, Paul

2016-01-01

Load Bearing Equipment for Neutral Buoyancy (LBE-NB) is an exercise frame that holds two exercising subjects in position as they apply counter forces to each other for lower extremity and spine loading resistance exercises. Resistance exercise prevents bone loss on ISS, but the ISS equipment is too massive for use in exploration craft. Integrating the human into the load directing, load generating, and motion control functions of the exercise equipment generates safe exercise loads with less equipment mass and volume.

22 CFR 135.32 - Equipment.

Science.gov (United States)

2010-04-01

... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

21 CFR 1403.32 - Equipment.

Science.gov (United States)

2010-04-01

... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

45 CFR 602.32 - Equipment.

Science.gov (United States)

2010-10-01

... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

49 CFR 18.32 - Equipment.

Science.gov (United States)

2010-10-01

... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

34 CFR 80.32 - Equipment.

Science.gov (United States)

2010-07-01

... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

10 CFR 600.232 - Equipment.

Science.gov (United States)

2010-01-01

... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

45 CFR 1183.32 - Equipment.

Science.gov (United States)

2010-10-01

... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

Efficacy of a Multi-level Intervention to Reduce Injecting and Sexual Risk Behaviors among HIV-Infected People Who Inject Drugs in Vietnam: A Four-Arm Randomized Controlled Trial.

Science.gov (United States)

Go, Vivian F; Frangakis, Constantine; Minh, Nguyen Le; Latkin, Carl; Ha, Tran Viet; Mo, Tran Thi; Sripaipan, Teerada; Davis, Wendy W; Zelaya, Carla; Vu, Pham The; Celentano, David D; Quan, Vu Minh

2015-01-01

Injecting drug use is a primary driver of HIV epidemics in many countries. People who inject drugs (PWID) and are HIV infected are often doubly stigmatized and many encounter difficulties reducing risk behaviors. Prevention interventions for HIV-infected PWID that provide enhanced support at the individual, family, and community level to facilitate risk-reduction are needed. 455 HIV-infected PWID and 355 of their HIV negative injecting network members living in 32 sub-districts in Thai Nguyen Province were enrolled. We conducted a two-stage randomization: First, sub-districts were randomized to either a community video screening and house-to-house visits or standard of care educational pamphlets. Second, within each sub-district, participants were randomized to receive either enhanced individual level post-test counseling and group support sessions or standard of care HIV testing and counseling. This resulted in four arms: 1) standard of care; 2) community level intervention; 3) individual level intervention; and 4) community plus individual intervention. Follow-up was conducted at 6, 12, 18, and 24 months. Primary outcomes were self-reported HIV injecting and sexual risk behaviors. Secondary outcomes included HIV incidence among HIV negative network members. Fewer participants reported sharing injecting equipment and unprotected sex from baseline to 24 months in all arms (77% to 4% and 24% to 5% respectively). There were no significant differences at the 24-month visit among the 4 arms (Wald = 3.40 (3 df); p = 0.33; Wald = 6.73 (3 df); p = 0.08). There were a total of 4 HIV seroconversions over 24 months with no significant difference between intervention and control arms. Understanding the mechanisms through which all arms, particularly the control arm, demonstrated both low risk behaviors and low HIV incidence has important implications for policy and prevention programming. ClinicalTrials.gov NCT01689545.

AN OBSERVATIONAL STUDY OF MATERNAL NEAR MISS CASES IN A TERTIARY CARE CENTRE

Directory of Open Access Journals (Sweden)

Elizabeth Joseph

2016-12-01

Full Text Available BACKGROUND DM WIMS is the only tertiary care referral hospital in the hilly tribal district of Wayanad. This is an observational study of 20 maternal near miss cases that presented in our hospital over a period of 4 months. MATERIALS AND METHODS This study was conducted by collecting data over a period of 4 months. Total number of live births in this period was 373. There were 20 cases of maternal near miss cases. Maternal near miss cases were chosen based on the inclusion criteria provided by WHO near miss approach for maternal health. RESULTS There were 373 live births in the 4-month observational period. In these 4 months, there were 20 cases of maternal near miss cases in our hospital. That is, maternal near miss ratio was 53.6/1000 live births. The majority were referred cases with MNM ratio of intrahospital cases being 13.4/1000 live births. The potentially life-threatening complications were obstetric haemorrhage and hypertensive disorders, which coexisted in majority of the women. The obstetric haemorrhage was mainly due to abruptio placenta, which can be attributed to the hypertensive complications. Preexisting anaemia was present in 35% of the MNM cases increasing their morbidity. CONCLUSION The maternal near miss ratio was 53.6/1000 live births, which is high. This can be attributed to the fact that our hospital is the only tertiary referral hospital in the hilly tribal district of Wayanad. Despite the MNM ratio being high, there were no cases of maternal death in this period. Low maternal mortality indicates the good first line of management given at the periphery hospital.

Estimating Potential Evapotranspiration by Missing Temperature Data Reconstruction

Directory of Open Access Journals (Sweden)

Eladio Delgadillo-Ruiz

2015-01-01

Full Text Available This work studies the statistical characteristics of potential evapotranspiration calculations and their relevance within the water balance used to determine water availability in hydrological basins. The purpose of this study was as follows: first, to apply a missing data reconstruction scheme in weather stations of the Rio Queretaro basin; second, to reduce the generated uncertainty of temperature data: mean, minimum, and maximum values in the evapotranspiration calculation which has a paramount importance in the manner of obtaining the water balance at any hydrological basin. The reconstruction of missing data was carried out in three steps: (1 application of a 4-parameter sinusoidal type regression to temperature data, (2 linear regression to residuals to obtain a regional behavior, and (3 estimation of missing temperature values for a certain year and during a certain season within the basin under study; estimated and observed temperature values were compared. Finally, using the obtained temperature values, the methods of Hamon, Papadakis, Blaney and Criddle, Thornthwaite, and Hargreaves were employed to calculate potential evapotranspiration that was compared to the real observed values in weather stations. With the results obtained from the application of this procedure, the surface water balance was corrected for the case study.

CT-guided cervical nerve root injections: comparing the immediate post-injection anesthetic-related effects of the transforaminal injection with a new indirect technique