Assessing Advanced Airway Management Performance in a National Cohort of Emergency Medical Services Agencies.

Science.gov (United States)

Wang, Henry E; Donnelly, John P; Barton, Dustin; Jarvis, Jeffrey L

2018-05-01

Although often the focus of quality improvement efforts, emergency medical services (EMS) advanced airway management performance has few national comparisons, nor are there many assessments with benchmarks accounting for differences in agency volume or patient mix. We seek to assess variations in advanced airway management and conventional intubation performance in a national cohort of EMS agencies. We used EMS data from ESO Solutions, a national EMS electronic health record system. We identified EMS emergency responses with attempted advanced airway management (conventional intubation, rapid sequence intubation, sedation-assisted intubation, supraglottic airway insertion, and cricothyroidotomy). We also separately examined cases with initial conventional intubation. We determined EMS agency risk-standardized advanced airway management and initial conventional intubation success rates by using mixed-effects regression models, fitting agency as a random intercept, adjusting for patient age, sex, race, cardiac arrest, or trauma status, and use of rapid sequence or sedation-assisted intubation, and accounting for reliability variations from EMS agency airway volume. We assessed changes in agency advanced airway management and initial conventional intubation performance rank after risk and reliability adjustment. We also identified high and low performers (reliability-adjusted and risk-standardized success confidence intervals falling outside the mean). During 2011 to 2015, 550 EMS agencies performed 57,209 advanced airway management procedures. Among 401 EMS agencies with greater than or equal to 10 advanced airway management procedures, there were a total of 56,636 procedures. Median reliability-adjusted and risk-standardized EMS agency advanced airway management success was 92.9% (interquartile range 90.1% to 94.8%; minimum 58.2%; maximum 99.0%). There were 56 advanced airway management low-performing and 38 high-performing EMS agencies. Among 342 agencies with

Performance of FDG PET/CT at initial diagnosis in a rare lymphoma: nodular lymphocyte-predominant Hodgkin lymphoma

Energy Technology Data Exchange (ETDEWEB)

Grellier, Jean Francois; Weinmann, Pierre [AP-HP- Hopital Europeen Georges Pompidou, Service de medecine nucleaire, Paris (France); Vercellino, Laetitia; Merlet, Pascal; Toubert, Marie-Elisabeth; Berenger, Nathalie [AP-HP- Hopital Saint-Louis, Service de medecine nucleaire, Paris (France); Leblanc, Thierry [Hopital Saint-Louis, Service d' immuno-hematologie, Paris (France); Thieblemont, Catherine [Universite Paris Diderot, Sorbonne Paris Cite - INSERM UMR-S1165, AP-HP- Hopital Saint-Louis, Service d' hemato-Oncologie, Paris (France); Briere, Josette [AP-HP- Hopital Saint-Louis, Service de pathologie, Paris (France); Brice, Pauline [AP-HP- Hopital Saint-Louis, Service d' hemato-Oncologie, Paris (France)

2014-11-15

Nodular lymphocyte-predominant Hodgkin lymphoma (NLPHL) is a rare Hodgkin lymphoma distinguished from classical Hodgkin lymphoma (cHL) by the nature of the neoplastic cells which express B-cell markers. We wanted to determine the diagnostic performance of FDG PET/CT in initial assessment and its therapeutic impact on staging. We retrospectively studied a population of 35 patients with NLPHL (8 previously treated for NLHPL, 27 untreated). All patients underwent an initial staging by pretherapeutic FDG PET/CT. The impact on initial stage or relapse stage was assessed by an independent physician. In a per-patient analysis, the sensitivity of the pretherapeutic FDG PET/CT was 100 %. In a per-site analysis, the sensitivity, specificity, positive predictive value, negative predictive value and accuracy of pretherapeutic FDG PET/CT were 100 %, 99 %, 97 %, 100 % and 99 %, respectively. Pretherapeutic FDG PET/CT led to a change in the initial stage/relapse stage in 12 of the 35 patients (34 %). In contrast to previous results established without FDG PET/CT, 20 % of patient had osteomedullary lesions. Pretherapeutic FDG PET/CT has excellent performance for initial staging or relapse staging of NLPHL. (orig.)

Initialization of Safety Assessment Process for the Croatian Radioactive Waste repository on Trgovska gora

International Nuclear Information System (INIS)

Lokner, V.; Levanat, I.; Subasic, D.

2000-01-01

An iterative process of safety assessment, presently focusing on the site-specific evaluation of the post-closure phase for the prospective LILW repository on Trgovska gora in Croatia, has recently been initiated. The primary aim of the first assessment iterations is to provide the experts involved, the regulators and the general public with a reasonable assurance that the applicable long term performance and safety objectives can be met. Another goal is to develop a sufficient understanding of the system behavior to support decisions about the site investigation, the facility design, the waste acceptance criteria and the closure conditions. In this initial phase, the safety assessment is structured in a manner following closely methodology of the ISAM. The International Programme for Improving Long Term Safety Assessment Methodologies for Near Surface Radioactive Waste Disposal Facilities the IAEA coordinated research program started in 1997. Results of the safety assessment first iteration will be organized and presented in the form of a preliminary safety analysis report (PSAR), expected to be completed in the second part of the year 2000. As the first report on the initiated safety assessment activities, the PSAR will describe the concept and aims of the assessment process. Particular emphasis will be placed on description of the key elements of a safety assessment approach by: a) defining the assessment context; b) providing description of the disposal system; c) developing and justifying assessment scenarios; d) formulating and implementing models; and e) interpreting the scoping calculations. (author)

A study on the determination of threshold values for the initiating event performance indicators of domestic nuclear power plants

International Nuclear Information System (INIS)

Kang, D. I.; Park, J. H.; Kim, K. Y.; Whang, M. J.; Yang, J. E.; Sung, G. Y.

2003-01-01

In this paper, we determine the threshold values of unplanned reactor scram, domestic initiating event performance indicator, using data of domestic unplanned reactor scram and probabilistic safety assessment model of Korea Standard Nuclear Power Plant(KSNP). We also perform a pilot study of initiating event Risk Based Performance Indicator(RBPI) for KSNP. Study results for unplanned reactor scram show that the threshold value of between green and blue color is 3, that of between blue and yellow color is 6, and that of between yellow and orange color is 30. Pilot study results of initiating event RBPI show that loss of feedwater, transient, and loss of component cooling water events are selected as initiating event RBPI for KSNP

Predictive Performance of the Simplified Acute Physiology Score (SAPS) II and the Initial Sequential Organ Failure Assessment (SOFA) Score in Acutely Ill Intensive Care Patients

DEFF Research Database (Denmark)

Granholm, Anders; Møller, Morten Hylander; Kragh, Mette

2016-01-01

PURPOSE: Severity scores including the Simplified Acute Physiology Score (SAPS) II and the Sequential Organ Failure Assessment (SOFA) score are used in intensive care units (ICUs) to assess disease severity, predict mortality and in research. We aimed to assess the predictive performance of SAPS II...... compared the discrimination of SAPS II and initial SOFA scores, compared the discrimination of SAPS II in our cohort with the original cohort, assessed the calibration of SAPS II customised to our cohort, and compared the discrimination for 90-day mortality vs. in-hospital mortality for both scores....... Discrimination was evaluated using areas under the receiver operating characteristics curves (AUROC). Calibration was evaluated using Hosmer-Lemeshow's goodness-of-fit Ĉ-statistic. RESULTS: AUROC for in-hospital mortality was 0.80 (95% confidence interval (CI) 0.77-0.83) for SAPS II and 0.73 (95% CI 0...

Methodologies for assessing long-term performance of high-level radioactive waste packages

International Nuclear Information System (INIS)

Stephens, K.; Boesch, L.; Crane, B.; Johnson, R.; Moler, R.; Smith, S.; Zaremba, L.

1986-01-01

Several methods the Nuclear Regulatory Commission (NRC) can use to independently assess Department of Energy (DOE) waste package performance were identified by The Aerospace Corporation. The report includes an overview of the necessary attributes of performance assessment, followed by discussions of DOE methods, probabilistic methods capable of predicting waste package lifetime and radionuclide releases, process modeling of waste package barriers, sufficiency of the necessary input data, and the applicability of probability density functions. It is recommended that the initial NRC performance assessment (for the basalt conceptual waste package design) should apply modular simulation, using available process models and data, to demonstrate this assessment method

Initial performance assessment of the disposal of spent nuclear fuel and high-level waste stored at Idaho National Engineering Laboratory. Volume 2: Appendices

Energy Technology Data Exchange (ETDEWEB)

Rechard, R.P. [ed.

1993-12-01

This performance assessment characterized plausible treatment options conceived by the Idaho National Engineering Laboratory (INEL) for its spent fuel and high-level radioactive waste and then modeled the performance of the resulting waste forms in two hypothetical, deep, geologic repositories: one in bedded salt and the other in granite. The results of the performance assessment are intended to help guide INEL in its study of how to prepare wastes and spent fuel for eventual permanent disposal. This assessment was part of the Waste Management Technology Development Program designed to help the US Department of Energy develop and demonstrate the capability to dispose of its nuclear waste, as mandated by the Nuclear Waste Policy Act of 1982. The waste forms comprised about 700 metric tons of initial heavy metal (or equivalent units) stored at the INEL: graphite spent fuel, experimental low enriched and highly enriched spent fuel, and high-level waste generated during reprocessing of some spent fuel. Five different waste treatment options were studied; in the analysis, the options and resulting waste forms were analyzed separately and in combination as five waste disposal groups. When the waste forms were studied in combination, the repository was assumed to also contain vitrified high-level waste from three DOE sites for a common basis of comparison and to simulate the impact of the INEL waste forms on a moderate-sized repository, The performance of the waste form was assessed within the context of a whole disposal system, using the U.S. Environmental Protection Agency`s Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes, 40 CFR 191, promulgated in 1985. Though the waste form behavior depended upon the repository type, all current and proposed waste forms provided acceptable behavior in the salt and granite repositories.

American Samoa Initial Technical Assessment Report

Energy Technology Data Exchange (ETDEWEB)

Busche, S.; Conrad, M.; Funk, K.; Kandt, A.; McNutt, P.

2011-09-01

This document is an initial energy assessment for American Samoa, the first of many steps in developing a comprehensive energy strategy. On March 1, 2010, Assistant Secretary of the Interior Tony Babauta invited governors and their staff from the Interior Insular Areas to meet with senior principals at the National Renewable Energy Laboratory (NREL). Meeting discussions focused on ways to improve energy efficiency and increase the deployment of renewable energy technologies in the U.S. Pacific Territories. In attendance were Governors Felix Camacho (Guam), Benigno Fitial (Commonwealth of the Northern Mariana Islands), and Togiola Tulafono, (American Samoa). This meeting brought together major stakeholders to learn and understand the importance of developing a comprehensive strategic plan for implementing energy efficiency measures and renewable energy technologies. For several decades, dependence on fossil fuels and the burden of high oil prices have been a major concern but never more at the forefront as today. With unstable oil prices, the volatility of fuel supply and the economic instability in American Samoa, energy issues are a high priority. In short, energy security is critical to American Samoa's future economic development and sustainability. Under an interagency agreement, funded by the Department of Interior's Office of Insular Affairs, NREL was tasked to deliver technical assistance to the islands of American Samoa. Technical assistance included conducting an initial technical assessment to define energy consumption and production data, establish an energy consumption baseline, and assist with the development of a strategic plan. The assessment and strategic plan will be used to assist with the transition to a cleaner energy economy. NREL provided an interdisciplinary team to cover each relevant technical area for the initial energy assessments. Experts in the following disciplines traveled to American Samoa for on-island site assessments: (1

The DECADE performance assessment program

International Nuclear Information System (INIS)

Weber, B.V.; Ottinger, P.F.; Commisso, R.J.; Thompson, J.; Rowley, J.E.; Filios, P.; Babineau, M.A.

1996-01-01

Previous analyses of DECADE Module 1 experiments indicated significant current loss between the plasma opening switch (POS) and an electron-beam load. A program was initiated to diagnose and improve the power flow to assess the performance of a multi-module DECADE system. Power flow measurements between the POS and load indicate high vacuum flow, distributed current loss and azimuthal asymmetries. A decreased load impedance reduces the fraction of the load current flowing in vacuum. Improved plasma source symmetry reduces losses near the load for long conduction times. Increased POS impedance is required to significantly improve the power coupling to the load. (author). 6 figs., 9 refs

The DECADE performance assessment program

Energy Technology Data Exchange (ETDEWEB)

Weber, B V; Ottinger, P F; Commisso, R J [Naval Research Lab., Washington, DC (United States). Plasma Physics Div.; Goyer, J R; Kortbawi, D [Physics International Co., Berkeley, CA (United States); Thompson, J [Maxwell Labs., San Diego, CA (United States); Rowley, J E; Filios, P [Defense Nuclear Agency, Alexandria, VA (United States); Babineau, M A [Sverdlup Technology, Tullahoma, TN (United States)

1997-12-31

Previous analyses of DECADE Module 1 experiments indicated significant current loss between the plasma opening switch (POS) and an electron-beam load. A program was initiated to diagnose and improve the power flow to assess the performance of a multi-module DECADE system. Power flow measurements between the POS and load indicate high vacuum flow, distributed current loss and azimuthal asymmetries. A decreased load impedance reduces the fraction of the load current flowing in vacuum. Improved plasma source symmetry reduces losses near the load for long conduction times. Increased POS impedance is required to significantly improve the power coupling to the load. (author). 6 figs., 9 refs.

Biosphere Modeling and Analyses in Support of Total System Performance Assessment

International Nuclear Information System (INIS)

Tappen, J. J.; Wasiolek, M. A.; Wu, D. W.; Schmitt, J. F.; Smith, A. J.

2002-01-01

The Nuclear Waste Policy Act of 1982 established the obligations of and the relationship between the U.S. Environmental Protection Agency (EPA), the U.S. Nuclear Regulatory Commission (NRC), and the U.S. Department of Energy (DOE) for the management and disposal of high-level radioactive wastes. In 1985, the EPA promulgated regulations that included a definition of performance assessment that did not consider potential dose to a member of the general public. This definition would influence the scope of activities conducted by DOE in support of the total system performance assessment program until 1995. The release of a National Academy of Sciences (NAS) report on the technical basis for a Yucca Mountain-specific standard provided the impetus for the DOE to initiate activities that would consider the attributes of the biosphere, i.e. that portion of the earth where living things, including man, exist and interact with the environment around them. The evolution of NRC and EPA Yucca Mountain-specific regulations, originally proposed in 1999, was critical to the development and integration of biosphere modeling and analyses into the total system performance assessment program. These proposed regulations initially differed in the conceptual representation of the receptor of interest to be considered in assessing performance. The publication in 2001 of final regulations in which the NRC adopted standard will permit the continued improvement and refinement of biosphere modeling and analyses activities in support of assessment activities

Biosphere Modeling and Analyses in Support of Total System Performance Assessment

International Nuclear Information System (INIS)

Jeff Tappen; M.A. Wasiolek; D.W. Wu; J.F. Schmitt

2001-01-01

The Nuclear Waste Policy Act of 1982 established the obligations of and the relationship between the U.S. Environmental Protection Agency (EPA), the U.S. Nuclear Regulatory Commission (NRC), and the U.S. Department of Energy (DOE) for the management and disposal of high-level radioactive wastes. In 1985, the EPA promulgated regulations that included a definition of performance assessment that did not consider potential dose to a member of the general public. This definition would influence the scope of activities conducted by DOE in support of the total system performance assessment program until 1995. The release of a National Academy of Sciences (NAS) report on the technical basis for a Yucca Mountain-specific standard provided the impetus for the DOE to initiate activities that would consider the attributes of the biosphere, i.e. that portion of the earth where living things, including man, exist and interact with the environment around them. The evolution of NRC and EPA Yucca Mountain-specific regulations, originally proposed in 1999, was critical to the development and integration of biosphere modeling and analyses into the total system performance assessment program. These proposed regulations initially differed in the conceptual representation of the receptor of interest to be considered in assessing performance. The publication in 2001 of final regulations in which the NRC adopted standard will permit the continued improvement and refinement of biosphere modeling and analyses activities in support of assessment activities

TURVA-2012: Performance assessment

International Nuclear Information System (INIS)

Hellae, Pirjo; Snellman, Margit; Marcos, Nuria; Pastina, Barbara; Smith, Paul; Koskinen, Kari

2014-01-01

TURVA-2012 is Posiva's safety case in support of the Preliminary Safety Analysis Report (PSAR) and application for a construction licence for a repository for disposal of spent nuclear fuel at the Olkiluoto site in south-western Finland. Posiva's safety concept is based on long-term isolation and containment, which is achieved through a robust engineered barrier system (EBS) design and favourable geological conditions at the repository site. The reference design considered in the TURVA-2012 safety case is the KBS-3V design, with the EBS consisting of a copper-iron canister, a buffer of swelling clay material, a backfill in the deposition tunnels of low-permeability material and closure of the central tunnels and other underground openings. The host rock acts as a natural barrier. Each barrier contributes to safety through one or more safety function. The conditions needed for the barriers to fulfil their respective safety functions are expressed in terms of performance targets for the EBS and the target properties for the host rock. The performance assessment (Posiva, 2013), which is a key component of TURVA-2012, analyses the ability of the repository system to provide containment and isolation of the spent nuclear fuel during the long-term evolution of the system and the site. The conditions needed for the barriers to fulfil their respective safety functions are expressed in terms of performance targets for the engineered barriers and target properties for the host rock, for example properties related to the corrosion resistance and mechanical strength of the canister as well as groundwater flow and composition. The analyses take into account the uncertainties in the initial state, the subsequent thermal, hydraulic, mechanical and chemical evolution of the repository system and uncertainties in the evolution. The conclusions of the performance assessment are based mostly on the output of key modelling activities. Whenever modelling is not possible the conclusions

Initial assessment of chest X-ray in thoracic trauma patients: Awareness of specific injuries

NARCIS (Netherlands)

Aukema, Tjeerd S.; Beenen, Ludo F. M.; Hietbrink, Falco; Leenen, Luke Ph

2012-01-01

To compare the reported injuries on initial assessment of the chest X-ray (CXR) in thoracic trauma patients to a second read performed by a dedicated trauma radiologist. By retrospective analysis of a prospective database, 712 patients with an injury to the chest admitted to the University Medical

Initial performance of the PIGMI prototype

International Nuclear Information System (INIS)

Stovall, J.E.

1979-01-01

The PIGMI (Pion Generator for Medical Irradiations) program at LASL is an accelerator development program aimed at completing the design of an accelerator suitable for use as a pion generator in a hospital-based radiotherapy program. The major thrust of the program has been the design of a 7 MeV prototype accelerator which emphasizes compactness, economy of construction, and operation and reliability. To achieve these goals the design of the prototype has exploited a number of innovations in proton linac technology. An overview of the program discussing the major innovative features of the prototype is presented. The initial operating experience is discussed and initial performance measurements are presented

Better Measurement for Performance Improvement in Low- and Middle-Income Countries: The Primary Health Care Performance Initiative (PHCPI) Experience of Conceptual Framework Development and Indicator Selection.

Science.gov (United States)

Veillard, Jeremy; Cowling, Krycia; Bitton, Asaf; Ratcliffe, Hannah; Kimball, Meredith; Barkley, Shannon; Mercereau, Laure; Wong, Ethan; Taylor, Chelsea; Hirschhorn, Lisa R; Wang, Hong

2017-12-01

Policy Points: Strengthening accountability through better measurement and reporting is vital to ensure progress in improving quality primary health care (PHC) systems and achieving universal health coverage (UHC). The Primary Health Care Performance Initiative (PHCPI) provides national decision makers and global stakeholders with opportunities to benchmark and accelerate performance improvement through better performance measurement. Results from the initial PHC performance assessments in low- and middle-income countries (LMICs) are helping guide PHC reforms and investments and improve the PHCPI's instruments and indicators. Findings from future assessment activities will further amplify cross-country comparisons and peer learning to improve PHC. New indicators and sources of data are needed to better understand PHC system performance in LMICs. The Primary Health Care Performance Initiative (PHCPI), a collaboration between the Bill and Melinda Gates Foundation, The World Bank, and the World Health Organization, in partnership with Ariadne Labs and Results for Development, was launched in 2015 with the aim of catalyzing improvements in primary health care (PHC) systems in 135 low- and middle-income countries (LMICs), in order to accelerate progress toward universal health coverage. Through more comprehensive and actionable measurement of quality PHC, the PHCPI stimulates peer learning among LMICs and informs decision makers to guide PHC investments and reforms. Instruments for performance assessment and improvement are in development; to date, a conceptual framework and 2 sets of performance indicators have been released. The PHCPI team developed the conceptual framework through literature reviews and consultations with an advisory committee of international experts. We generated 2 sets of performance indicators selected from a literature review of relevant indicators, cross-referenced against indicators available from international sources, and evaluated through

Performance assessment experience at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Lee, D.W.

1994-01-01

The development of a performance assessment (PA) for low-level radioactive waste disposal operations at Oak Ridge National Laboratory (ORNL) was initiated in 1989 and is continuing. A draft PA was prepared in September 1990 and submitted to the DOE Peer Review Panel for review and comment. Recommendations were received that formed the basis for a revised PA that was completed in December 1993. The review of the revised PA is continuing. This paper reviews the experience gained in the preparation of the PA including the technical difficulties associated with performance assessment in Oak Ridge and an overview of the methods used in the PA. Changes in waste operations that resulted from the findings in the PA include improved waste acceptance criteria, waste certification, and waste management practices. The discussion includes issues that relate to the application of current performance objectives to older disposal facilities, which are being addressed as part of the CERCLA process

Application of the cognitive therapy model to initial crisis assessment.

Science.gov (United States)

Calvert, Patricia; Palmer, Christine

2003-03-01

This article provides a background to the development of cognitive therapy and cognitive therapeutic skills with a specific focus on the treatment of a depressive episode. It discusses the utility of cognitive therapeutic strategies to the model of crisis theory and initial crisis assessment currently used by the Community Assessment & Treatment Team of Waitemata District Health Board on the North Shore of Auckland, New Zealand. A brief background to cognitive therapy is provided, followed by a comprehensive example of the use of the Socratic questioning method in guiding collaborative assessment and treatment of suicidality by nurses during the initial crisis assessment.

42 CFR 438.240 - Quality assessment and performance improvement program.

Science.gov (United States)

2010-10-01

... contracts with MCOs and PIHPs. (b) Basic elements of MCO and PIHP quality assessment and performance... of the interventions. (iv) Planning and initiation of activities for increasing or sustaining... State may require that an MCO or PIHP have in effect a process for its own evaluation of the impact and...

Taking a positive spin: preserved initiative and performance of everyday activities across mild Alzheimer's, vascular and mixed dementia.

Science.gov (United States)

Giebel, Clarissa M; Burns, Alistair; Challis, David

2017-09-01

The literature commonly evaluates those daily activities which are impaired in dementia. However, in the mild stages, people with dementia (PwD) are still able to initiate and perform many of those tasks. With a lack of research exploring variations between different dementia diagnoses, this study sought to investigate those daily activities with modest impairments in the mild stages and how these compare between Alzheimer's disease (AD), vascular dementia (VaD) and mixed dementia. Staff from memory assessment services from nine National Health Service trusts across England identified and approached informal carers of people with mild dementia. Carers completed the newly revised Interview for Deteriorations in Daily Living Activities in Dementia 2 assessing the PwD's initiative and performance of instrumental activities of daily living (IADLs). Data were analysed using analysis of variance and Chi-square tests to compare the maintenance of IADL functioning across AD, VaD, and mixed dementia. A total of 160 carers returned the Interview for Deteriorations in Daily Living Activities in Dementia 2, of which 109, 21, and 30 cared for someone with AD, VaD, and mixed dementia, respectively. There were significant variations across subtypes, with AD showing better preserved initiative and performance than VaD for several IADLs. Overall, PwD showed greater preservation of performance than initiative, with tasks such as preparing a hot drink and dressing being best maintained. Findings can help classify dementia better into subtypes in order to receive bespoke support. It suggests that interventions should primarily address initiative to improve overall functioning. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Importance of Performance Measurement and MCH Epidemiology Leadership to Quality Improvement Initiatives at the National, State and Local Levels.

Science.gov (United States)

Rankin, Kristin M; Gavin, Loretta; Moran, John W; Kroelinger, Charlan D; Vladutiu, Catherine J; Goodman, David A; Sappenfield, William M

2016-11-01

Purpose In recognition of the importance of performance measurement and MCH epidemiology leadership to quality improvement (QI) efforts, a plenary session dedicated to this topic was presented at the 2014 CityMatCH Leadership and MCH Epidemiology Conference. This paper summarizes the session and provides two applications of performance measurement to QI in MCH. Description Performance measures addressing processes of care are ubiquitous in the current health system landscape and the MCH community is increasingly applying QI processes, such as Plan-Do-Study-Act (PDSA) cycles, to improve the effectiveness and efficiency of systems impacting MCH populations. QI is maximally effective when well-defined performance measures are used to monitor change. Assessment MCH epidemiologists provide leadership to QI initiatives by identifying population-based outcomes that would benefit from QI, defining and implementing performance measures, assessing and improving data quality and timeliness, reporting variability in measures throughout PDSA cycles, evaluating QI initiative impact, and translating findings to stakeholders. MCH epidemiologists can also ensure that QI initiatives are aligned with MCH priorities at the local, state and federal levels. Two examples of this work, one highlighting use of a contraceptive service performance measure and another describing QI for peripartum hemorrhage prevention, demonstrate MCH epidemiologists' contributions throughout. Challenges remain in applying QI to complex community and systems-level interventions, including those aimed at improving access to quality care. Conclusion MCH epidemiologists provide leadership to QI initiatives by ensuring they are data-informed and supportive of a common MCH agenda, thereby optimizing the potential to improve MCH outcomes.

Process of performance assessment

International Nuclear Information System (INIS)

King, C.M.; Halford, D.K.

1987-01-01

Performance assessment is the process used to evaluate the environmental consequences of disposal of radioactive waste in the biosphere. An introductory review of the subject is presented. Emphasis is placed on the process of performance assessment from the standpoint of defining the process. Performance assessment, from evolving experience at DOE sites, has short-term and long-term subprograms, the components of which are discussed. The role of mathematical modeling in performance assessment is addressed including the pros and cons of current approaches. Finally, the system/site/technology issues as the focal point of this symposium are reviewed

Performance Analysis of the Capability Assessment Tool for Sustainable Manufacturing

Directory of Open Access Journals (Sweden)

Enda Crossin

2013-08-01

Full Text Available This paper explores the performance of a novel capability assessment tool, developed to identify capability gaps and associated training and development requirements across the supply chain for environmentally-sustainable manufacturing. The tool was developed to assess 170 capabilities that have been clustered with respect to key areas of concern such as managing energy, water, material resources, carbon emissions and waste as well as environmental management practices for sustainability. Two independent expert teams used the tool to assess a sample group of five first and second tier sports apparel and footwear suppliers within the supply chain of a global sporting goods manufacturer in Asia. The paper addresses the reliability and robustness of the developed assessment method by formulating the expected links between the assessment results. The management practices of the participating suppliers were shown to be closely connected to their performance in managing their resources and emissions. The companies’ initiatives in implementing energy efficiency measures were found to be generally related to their performance in carbon emissions management. The suppliers were also asked to undertake a self-assessment by using a short questionnaire. The large gap between the comprehensive assessment and these in-house self-assessments revealed the suppliers’ misconceptions about their capabilities.

NRC performance assessment program

International Nuclear Information System (INIS)

Coplan, S.M.

1986-01-01

The U.S. Nuclear Regulatory Commission's (NRC) performance assessment program includes the development of guidance to the U.S. Department of Energy (DOE) on preparation of a license application and on conducting the studies to support a license application. The nature of the licensing requirements of 10 CFR Part 60 create a need for performance assessments by the DOE. The NRC and DOE staffs each have specific roles in assuring the adequacy of those assessments. Performance allocation is an approach for determining what testing and analysis will be needed during site characterization to assure that an adequate data base is available to support the necessary performance assessments. From the standpoint of establishing is implementable methodology, the most challenging performance assessment needed for licensing is the one that will be used to determine compliance with the U.S. Environmental Protection Agency's (EPA) containment requirement

TSPA 1991: An initial total-system performance assessment for Yucca Mountain

International Nuclear Information System (INIS)

Barnard, R.W.; Wilson, M.L.; Dockery, H.A.; Kaplan, P.G.; Eaton, R.R.; Bingham, F.W.; Gauthier, J.H.; Robey, T.H.

1992-07-01

This report describes an assessment of the long-term performance of a repository system that contains deeply buried highly radioactive waste; the system is assumed to be located at the potential site at Yucca Mountain, Nevada. The study includes an identification of features, events, and processes that might affect the potential repository, a construction of scenarios based on this identification, a selection of models describing these scenarios (including abstraction of appropriate models from detailed models), a selection of probability distributions for the parameters in the models, a stochastic calculation of radionuclide releases for the scenarios, and a derivation of complementary cumulative distribution functions (CCDFs) for the releases. Releases and CCDFs are calculated for four categories of scenarios: aqueous flow (modeling primarily the existing conditions at the site, with allowances for climate change), gaseous flow, basaltic igneous activity, and human intrusion. The study shows that models of complex processes can be abstracted into more simplified representations that preserve the understanding of the processes and produce results consistent with those of more complex models

Performance assessment task team progress report

International Nuclear Information System (INIS)

Wood, D.E.; Curl, R.U.; Armstrong, D.R.; Cook, J.R.; Dolenc, M.R.; Kocher, D.C.; Owens, K.W.; Regnier, E.P.; Roles, G.W.; Seitz, R.R.

1994-05-01

The U.S. Department of Energy (DOE) Headquarters EM-35, established a Performance Assessment Task Team (referred to as the Team) to integrate the activities of the sites that are preparing performance assessments (PAs) for disposal of new low-level waste, as required by Chapter III of DOE Order 5820.2A, open-quotes Low-Level Waste Managementclose quotes. The intent of the Team is to achieve a degree of consistency among these PAs as the analyses proceed at the disposal sites. The Team's purpose is to recommend policy and guidance to the DOE on issues that impact the PAs, including release scenarios and parameters, so that the approaches are as consistent as possible across the DOE complex. The Team has identified issues requiring attention and developed discussion papers for those issues. Some issues have been completed, and the recommendations are provided in this document. Other issues are still being discussed, and the status summaries are provided in this document. A major initiative was to establish a subteam to develop a set of test scenarios and parameters for benchmarking codes in use at the various sites. The activities of the Team are reported here through December 1993

Initial performance assessment of the Westinghouse AP600 containment design and related safety issues

International Nuclear Information System (INIS)

Nicolette, V.F.; Washington, K.E.; Tills, J.L.

1991-01-01

This work summarizes the Westinghouse AP600 advanced reactor design assessment calculations performed to date with the CONTAIN code. Correlations for modeling the important heat transfer phenomena are discussed as well. A CONTAIN model of the AP600 was constructed for design basis accident (DBA) calculations. Insights gained from modeling of the smaller-scale Westinghouse Integral Test Facility were incorporated in the development of the AP600 model. The results of the DBA calculations are compared to the results of other researchers to serve as a point of reference for future severe accident calculations. The CONTAIN calculations are reviewed to examine several parameters/phenomena of interest. The results of the calculations are also used to identify limitations of the CONTAIN code regarding application to advanced reactor containment designs. The most recent heat transfer correlations available in the literature are assessed for use in the flow regimes and geometries applicable to the AP600. Use of one of these correlations in CONTAIN may allow for a more accurate assessment of the AP600

Performance assessment techniques for groundwater recovery and treatment systems

Energy Technology Data Exchange (ETDEWEB)

Kirkpatrick, G.L. [Environmental Resources Management, Inc., Exton, PA (United States)

1993-03-01

Groundwater recovery and treatment (pump and treat systems) continue to be the most commonly selected remedial technology for groundwater restoration and protection programs at hazardous waste sites and RCRA facilities nationwide. Implementing a typical groundwater recovery and treatment system includes the initial assessment of groundwater quality, characterizing aquifer hydrodynamics, recovery system design, system installation, testing, permitting, and operation and maintenance. This paper focuses on methods used to assess the long-term efficiency of a pump and treat system. Regulatory agencies and industry alike are sensitive to the need for accurate assessment of the performance and success of groundwater recovery systems for contaminant plume abatement and aquifer restoration. Several assessment methods are available to measure the long-term performance of a groundwater recovery system. This paper presents six assessment techniques: degree of compliance with regulatory agency agreement (Consent Order of Record of Decision), hydraulic demonstration of system performance, contaminant mass recovery calculation, system design and performance comparison, statistical evaluation of groundwater quality and preferably, integration of the assessment methods. Applying specific recovery system assessment methods depends upon the type, amount, and quality of data available. Use of an integrated approach is encouraged to evaluate the success of a groundwater recovery and treatment system. The methods presented in this paper are for engineers and corporate management to use when discussing the effectiveness of groundwater remediation systems with their environmental consultant. In addition, an independent (third party) system evaluation is recommended to be sure that a recovery system operates efficiently and with minimum expense.

The Effects of Performance-Based Assessment Criteria on Student Performance and Self-Assessment Skills

Science.gov (United States)

Fastre, Greet Mia Jos; van der Klink, Marcel R.; van Merrienboer, Jeroen J. G.

2010-01-01

This study investigated the effect of performance-based versus competence-based assessment criteria on task performance and self-assessment skills among 39 novice secondary vocational education students in the domain of nursing and care. In a performance-based assessment group students are provided with a preset list of performance-based…

24 CFR 115.206 - Performance assessments; Performance standards.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Performance assessments; Performance standards. 115.206 Section 115.206 Housing and Urban Development Regulations Relating to Housing... AGENCIES Certification of Substantially Equivalent Agencies § 115.206 Performance assessments; Performance...

Relationship Between Academic Performance and Student Self-Assessment of Clinical Performance in the College of Podiatric Medicine and Surgery.

Science.gov (United States)

Yoho, Robert M; Vardaxis, Vassilios; Millonig, Kelsey

2016-05-01

Student self-assessment is viewed as an important tool in medical education. We sought to identify the relationship between student academic performance and third-year clinical performance self-assessment. No such study exists in podiatric medical education. Third-year podiatric medical students from the classes of 2012 through 2014 completed a self-assessment of their performance for each of five broad clinical podiatric medical domains (Professionalism, Medicine, Radiology, Surgery, and Biomechanics/Orthopedics). The assessment was completed after students finished the first 12 weeks of their third-year clinical rotations (PRE) and a second time at the conclusion of the third year (POST). The mean self-assessment score for PRE and POST surveys for all combined domains was determined for each student. This mean was compared with the student's 3-year cumulative grade point average (GPA). Students' clinical experiences for the year were essentially identical. No statistically significant correlation was identified between cumulative GPA and the PRE and POST clinical self-assessments or with the change between PRE and POST assessments based on the Pearson correlation test for each class separately or on the pooled data. Published studies in allopathic medical education have shown that students with lower GPAs tend to rate their clinical performance higher in initial clinical performance self-assessment. Our results show that student academic performance was not correlated with clinical performance self-assessment. These findings may be due to the explicit description of successful clinical competency completion, the orientation students receive before the start of clinical training, and the continuous feedback received from clinical preceptors.

Introduction to radiological performance assessment

International Nuclear Information System (INIS)

Moss, G.

1995-02-01

A radiological performance assessment is conducted to provide reasonable assurance that performance objectives for low-level radioactive waste (LLW) disposal will be met. Beginning in the early stages of development, a radiological performance assessment continues through the operational phase, and is instrumental in the postclosure of the facility. Fundamental differences exist in the regulation of commercial and defense LLW, but the radiological performance assessment process is essentially the same for both. The purpose of this document is to describe that process in a concise and straightforward manner. This document focuses on radiological performance assessment as it pertains to commercial LLW disposal, but is applicable to US Department of Energy sites as well. Included are discussions on performance objectives, site characterization, and how a performance assessment is conducted. A case study is used to illustrate how the process works as a whole. A bibliography is provided to assist in locating additional information

Formative Assessment Jump-Starts a Middle Grades Differentiation Initiative

Science.gov (United States)

Doubet, Kristina J.

2012-01-01

A rural middle level school had stalled in its third year of a district-wide differentiation initiative. This article describes the way teachers and the leadership team engaged in collaborative practices to put a spotlight on formative assessment. Teachers learned to systematically gather formative assessment data from their students and to use…

A case study of three Puerto Rico-Statewide Systemic Initiative intermediate science teachers' views on and use of performance assessment

Science.gov (United States)

Pico, Rene Antonio, II

The purpose of this study was to investigate how teachers perceived and used performance assessment in the science classroom. Ms. Sanchez, Mrs. Irizarry, and Mrs. Bonnin, seventh grade teachers, participated in the study. Five research questions regarding the use of performance assessment were generated from these areas of inquiry: (a) teachers' views, (b) teachers' concerns, (c) teachers' level of use, (d) teachers' perceived facilitators, and (e) teachers' perceived barriers. Qualitative research methodologies were employed to collect and analyze the data. These included the use of informal interviews, a demographic survey, the Stage of Concern Questionnaire (Hall, George and Rutherford, 1979), the Level of Use Interview protocol (Loucks et al., 1975) and the study of artifacts. Performance assessment was defined by the three teachers as a dynamic process requiring the use of manipulatives in which students are involved as working participants in their own learning. Mrs. Irizarry and Mrs. Bonnin, described performance assessment with a broader range of possible executions, implying the use of tasks that allowed teachers to observe student behavior ranging from simple written responses to work collected over time. Ms. Sanchez defined assessment mainly on the basis of the use of equipment, instruments and materials in science. Ms. Sanchez reflected low intensity in the Levels of Concerns (Hall, George and Rutherford, 1979), suggesting that she felt at ease when working with performance assessment. Mrs. Irizarry and Mrs. Bonnin reflected definite commitment with the innovation. A major similarity was found in the areas of Refocusing (SoC 6), and Collaboration (SoC 5) denoting an interest in exploring and trying new alternatives. Ms. Sanchez and Mrs. Bonnin demonstrated characteristics of a well established routine or pattern in the Level of Use (Loucks et al., 1975) of performance assessment, while Mrs. Irizarry explored alternatives further and established a

The process of performance assessment

International Nuclear Information System (INIS)

King, C.M.; Halford, D.K.

1986-01-01

An introductory review of the subject of ''Performance Assessment'' will be presented. Emphasis will be placed on the process of performance assessment from the standpoint of defining the process. Performance assessment, from evolving experience at DOE sites, has short-term and long-term subprograms, the components of which will be discussed. The role of mathematical modeling in performance assessment will be addressed including the pros and cons of current approaches. Finally, the ''system/site/technology'' issues as the focal point of this symposium will be reviewed

Assessment of Human Performance and Safety Culture at the Paks Nuclear Power Plant

International Nuclear Information System (INIS)

Toth, Janos; Hadnagy, Lajos

2002-01-01

Evaluation of human performance and safety culture of the personnel at a Nuclear Power Plant is a very important element of the self assessment process. At the Paks NPP a systematic approach to this problem started in the early 90's. The first comprehensive analysis of the human performance of the personnel was performed by the Hungarian Research Institute for Electric Power (VEIKI). The analysis of human failures is also a part of the investigation and analysis of safety related reported events. This human performance analysis of events is carried out by the Laboratory of Psychology of the plant and a supporting organisation namely the Department of Ergonomics and Psychology of the Budapest University of Technical and Economical Sciences. The analysis of safety culture at the Paks NPP has been in the focus of attention since the implementation of the INSAG-4 document started world-wide. In 1993 an IAEA model project namely 'Strengthening Training for Operational Safety' was initiated with a sub-project called 'Enhancement of Safety Culture'. Within this project the first step was the initial assessment of the safety culture level at the Paks NPP. It was followed by some corrective actions and safety culture improvement programme. In 1999 the second assessment was performed in order to evaluate the progress as a result of the improvement programme. A few indicators reflecting the elements of safety culture were defined and compared. The assessment of the safety culture with a survey among the managers was performed in September 2000 and the results are being evaluated at the moment. The intention of the plant management is to repeat the assessment every 2-3 years and evaluate the trend of the indicator. (authors)

Multi-model assessment of the impact of soil moisture initialization on mid-latitude summer predictability

Science.gov (United States)

Ardilouze, Constantin; Batté, L.; Bunzel, F.; Decremer, D.; Déqué, M.; Doblas-Reyes, F. J.; Douville, H.; Fereday, D.; Guemas, V.; MacLachlan, C.; Müller, W.; Prodhomme, C.

2017-12-01

Land surface initial conditions have been recognized as a potential source of predictability in sub-seasonal to seasonal forecast systems, at least for near-surface air temperature prediction over the mid-latitude continents. Yet, few studies have systematically explored such an influence over a sufficient hindcast period and in a multi-model framework to produce a robust quantitative assessment. Here, a dedicated set of twin experiments has been carried out with boreal summer retrospective forecasts over the 1992-2010 period performed by five different global coupled ocean-atmosphere models. The impact of a realistic versus climatological soil moisture initialization is assessed in two regions with high potential previously identified as hotspots of land-atmosphere coupling, namely the North American Great Plains and South-Eastern Europe. Over the latter region, temperature predictions show a significant improvement, especially over the Balkans. Forecast systems better simulate the warmest summers if they follow pronounced dry initial anomalies. It is hypothesized that models manage to capture a positive feedback between high temperature and low soil moisture content prone to dominate over other processes during the warmest summers in this region. Over the Great Plains, however, improving the soil moisture initialization does not lead to any robust gain of forecast quality for near-surface temperature. It is suggested that models biases prevent the forecast systems from making the most of the improved initial conditions.

When the Sky Falls: Performing Initial Assessments of Bright Atmospheric Events

Science.gov (United States)

Cooke, William J.; Brown, Peter; Blaauw, Rhiannon; Kingery, Aaron; Moser, Danielle

2015-01-01

The 2013 Chelyabinsk super bolide was the first "significant" impact event to occur in the age of social media and 24 hour news. Scientists, used to taking many days or weeks to analyze fireball events, were hard pressed to meet the immediate demands (within hours) for answers from the media, general public, and government officials. Fulfilling these requests forced many researchers to exploit information available from various Internet sources - videos were downloaded from sites like Youtube, geolocated via Google Street View, and quickly analyzed with improvised software; Twitter and Facebook were scoured for eyewitness accounts of the fireball and reports of meteorites. These data, combined with infrasound analyses, enabled a fairly accurate description of the Chelyabinsk event to be formed within a few hours; in particular, any relationship to 2012 DA14 (which passed near Earth later that same day) was eliminated. Results of these analyses were quickly disseminated to members of the NEO community for press conferences and media interviews. Despite a few minor glitches, the rapid initial assessment of Chelyabinsk was a triumph, permitting the timely conveyance of accurate information to the public and the incorporation of social media into fireball analyses. Beginning in 2008, the NASA Meteoroid Environments Office, working in cooperation with Western's Meteor Physics Group, developed processes and software that permit quick characterization - mass, trajectory, and orbital properties - of fireball events. These tools include automated monitoring of Twitter to establish the time of events (the first tweet is usually no more than a few seconds after the fireball), mining of Youtube and all sky camera web archives to locate videos suitable for analyses, use of Google Earth and Street View to geolocate the video locations, and software to determine the fireball trajectory and object orbital parameters, including generation of animations suitable for popular media

Guidance for performing preliminary assessments under CERCLA

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-09-01

EPA headquarters and a national site assessment workgroup produced this guidance for Regional, State, and contractor staff who manage or perform preliminary assessments (PAs). EPA has focused this guidance on the types of sites and site conditions most commonly encountered. The PA approach described in this guidance is generally applicable to a wide variety of sites. However, because of the variability among sites, the amount of information available, and the level of investigative effort required, it is not possible to provide guidance that is equally applicable to all sites. PA investigators should recognize this and be aware that variation from this guidance may be necessary for some sites, particularly for PAs performed at Federal facilities, PAs conducted under EPA`s Environmental Priorities Initiative (EPI), and PAs at sites that have previously been extensively investigated by EPA or others. The purpose of this guidance is to provide instructions for conducting a PA and reporting results. This guidance discusses the information required to evaluate a site and how to obtain it, how to score a site, and reporting requirements. This document also provides guidelines and instruction on PA evaluation, scoring, and the use of standard PA scoresheets. The overall goal of this guidance is to assist PA investigators in conducting high-quality assessments that result in correct site screening or further action recommendations on a nationally consistent basis.

Technology Performance Level Assessment Methodology.

Energy Technology Data Exchange (ETDEWEB)

Roberts, Jesse D.; Bull, Diana L; Malins, Robert Joseph; Costello, Ronan Patrick; Aurelien Babarit; Kim Nielsen; Claudio Bittencourt Ferreira; Ben Kennedy; Kathryn Dykes; Jochem Weber

2017-04-01

The technology performance level (TPL) assessments can be applied at all technology development stages and associated technology readiness levels (TRLs). Even, and particularly, at low TRLs the TPL assessment is very effective as it, holistically, considers a wide range of WEC attributes that determine the techno-economic performance potential of the WEC farm when fully developed for commercial operation. The TPL assessment also highlights potential showstoppers at the earliest possible stage of the WEC technology development. Hence, the TPL assessment identifies the technology independent “performance requirements.” In order to achieve a successful solution, the entirety of the performance requirements within the TPL must be considered because, in the end, all the stakeholder needs must be achieved. The basis for performing a TPL assessment comes from the information provided in a dedicated format, the Technical Submission Form (TSF). The TSF requests information from the WEC developer that is required to answer the questions posed in the TPL assessment document.

Lysimeter data as input to performance assessment models

International Nuclear Information System (INIS)

McConnell, J.W. Jr.

1998-01-01

The Field Lysimeter Investigations: Low-Level Waste Data Base Development Program is obtaining information on the performance of radioactive waste forms in a disposal environment. Waste forms fabricated using ion-exchange resins from EPICOR-117 prefilters employed in the cleanup of the Three Mile Island (TMI) Nuclear Power Station are being tested to develop a low-level waste data base and to obtain information on survivability of waste forms in a disposal environment. The program includes reviewing radionuclide releases from those waste forms in the first 7 years of sampling and examining the relationship between code input parameters and lysimeter data. Also, lysimeter data are applied to performance assessment source term models, and initial results from use of data in two models are presented

Performance Assessment and Geometric Calibration of RESOURCESAT-2

Science.gov (United States)

Radhadevi, P. V.; Solanki, S. S.; Akilan, A.; Jyothi, M. V.; Nagasubramanian, V.

2016-06-01

Resourcesat-2 (RS-2) has successfully completed five years of operations in its orbit. This satellite has multi-resolution and multi-spectral capabilities in a single platform. A continuous and autonomous co-registration, geo-location and radiometric calibration of image data from different sensors with widely varying view angles and resolution was one of the challenges of RS-2 data processing. On-orbit geometric performance of RS-2 sensors has been widely assessed and calibrated during the initial phase operations. Since then, as an ongoing activity, various geometric performance data are being generated periodically. This is performed with sites of dense ground control points (GCPs). These parameters are correlated to the direct geo-location accuracy of the RS-2 sensors and are monitored and validated to maintain the performance. This paper brings out the geometric accuracy assessment, calibration and validation done for about 500 datasets of RS-2. The objectives of this study are to ensure the best absolute and relative location accuracy of different cameras, location performance with payload steering and co-registration of multiple bands. This is done using a viewing geometry model, given ephemeris and attitude data, precise camera geometry and datum transformation. In the model, the forward and reverse transformations between the coordinate systems associated with the focal plane, payload, body, orbit and ground are rigorously and explicitly defined. System level tests using comparisons to ground check points have validated the operational geo-location accuracy performance and the stability of the calibration parameters.

Thematic mapper data quality and performance assessment in renewable resource/agricultural remote sensing

Science.gov (United States)

Erickson, J. D.; Macdonald, R. B. (Principal Investigator)

1982-01-01

A "quick look" investigation of the initial LANDSAT-4, thematic mapper (TM) scene received from Goddard Space Flight Center was performed to gain early insight into the characteristics of TM data. The initial scene, containing only the first four bands of the seven bands recorded by the TM, was acquired over the Detroit, Michigan, area on July 20, 1982. It yielded abundant information for scientific investigation. A wide variety of studies were conducted to assess all aspects of TM data. They ranged from manual analyses of image products to detect obvious optical, electronic, or mechanical defects to detailed machine analyses of the digital data content for evaluation of spectral separability of vegetative/nonvegetative classes. These studies were applied to several segments extracted from the full scene. No attempt was made to perform end-to-end statistical evaluations. However, the output of these studies do identify a degree of positive performance from the TM and its potential for advancing state-of-the-art crop inventory and condition assessment technology.

Using Mixed Methods to Assess Initiatives with Broad-Based Goals

Science.gov (United States)

Inkelas, Karen Kurotsuchi

2017-01-01

This chapter describes a process for assessing programmatic initiatives with broad-ranging goals with the use of a mixed-methods design. Using an example of a day-long teaching development conference, this chapter provides practitioners step-by-step guidance on how to implement this assessment process.

Systems scale assessment of the sustainability implications of emerging green initiatives

International Nuclear Information System (INIS)

Tiwary, Abhishek; Namdeo, Anil; Fuentes, Jose; Dore, Anthony; Hu, Xiao-Ming; Bell, Margaret

2013-01-01

This paper demonstrates a systems framework for assessment of environmental impacts from ‘green initiatives’, through a case study of meso-scale, anthropogenic–biogenic interactions. The following cross-sectoral green initiatives, combining the emerging trends in the North East region of the United Kingdom, have been considered – increasing the vegetation cover; decarbonising road transport; decentralising energy production through biomass plants. Two future scenarios are assessed – Baseline 2 020 (projected emissions from realisation of policy instruments); Aggressive 2 020 (additional emissions from realisation of green initiatives). Resulting trends from the Aggressive 2 020 scenario suggest an increase in emissions of pollutant precursors, including biogenic volatile organic compounds and nitrogen dioxide over the base case by up to 20% and 5% respectively. This has implications for enhanced daytime ozone and secondary aerosols formation by up to 15% and over 5% respectively. Associated land cover changes show marginal decrease of ambient temperature but modest reductions in ammonia and ambient particulates. -- Highlights: • A systems scale assessment framework for emerging green initiatives is proposed. • Interactions between urban greenspace, greener vehicles and bioenergy system examined. • Altering future emissions profile enhances synthesis of photochemical precursors. • Incorporating whole-system evaluation deemed vital for well-rounded sustainability. -- Systems scale implication for air pollution was assessed across three sectors of emerging green initiatives-energy, transport and ecosystem

Angiographic assessment of initial balloon angioplasty results.

Science.gov (United States)

Gardiner, Geoffrey A; Sullivan, Kevin L; Halpern, Ethan J; Parker, Laurence; Beck, Margaret; Bonn, Joseph; Levin, David C

2004-10-01

To determine the influence of three factors involved in the angiographic assessment of balloon angioplasty-interobserver variability, operator bias, and the definition used to determine success-on the primary (technical) results of angioplasty in the peripheral arteries. Percent stenosis in 107 lesions in lower-extremity arteries was graded by three independent, experienced vascular radiologists ("observers") before and after balloon angioplasty and their estimates were compared with the initial interpretations reported by the physician performing the procedure ("operator") and an automated quantitative computer analysis. Observer variability was measured with use of intraclass correlation coefficients and SD. Differences among the operator, observers, and the computer were analyzed with use of the Wilcoxon signed-rank test and analysis of variance. For each evaluator, the results in this series of lesions were interpreted with three different definitions of success. Estimation of residual stenosis varied by an average range of 22.76% with an average SD of 8.99. The intraclass correlation coefficients averaged 0.59 for residual stenosis after angioplasty for the three observers but decreased to 0.36 when the operator was included as the fourth evaluator. There was good to very good agreement among the three independent observers and the computer, but poor correlation with the operator (P definition of success was used. Significant differences among the operator, the three observers, and the computer were not present when the definition of success was based on less than 50% residual stenosis. Observer variability and bias in the subjective evaluation of peripheral angioplasty can have a significant influence on the reported initial success rates. This effect can be largely eliminated with the use of residual stenosis of less than 50% to define success. Otherwise, meaningful evaluation of angioplasty results will require independent panels of evaluators or

The effects of performance-based assessment criteria on student performance and self-assessment skills

NARCIS (Netherlands)

Fastré, Greet; Van der Klink, Marcel; Van Merriënboer, Jeroen

2010-01-01

Fastré, G. M. J., Van der Klink, M. R., & Van Merriënboer, J. J. G. (2010). The effects of performance-based assessment criteria on student performance and self-assessment skills. Advances in Health Science Education, 15(4), 517-532.

PERFORMANCE ASSESSMENT AND GEOMETRIC CALIBRATION OF RESOURCESAT-2

Directory of Open Access Journals (Sweden)

P. V. Radhadevi

2016-06-01

Full Text Available Resourcesat-2 (RS-2 has successfully completed five years of operations in its orbit. This satellite has multi-resolution and multi-spectral capabilities in a single platform. A continuous and autonomous co-registration, geo-location and radiometric calibration of image data from different sensors with widely varying view angles and resolution was one of the challenges of RS-2 data processing. On-orbit geometric performance of RS-2 sensors has been widely assessed and calibrated during the initial phase operations. Since then, as an ongoing activity, various geometric performance data are being generated periodically. This is performed with sites of dense ground control points (GCPs. These parameters are correlated to the direct geo-location accuracy of the RS-2 sensors and are monitored and validated to maintain the performance. This paper brings out the geometric accuracy assessment, calibration and validation done for about 500 datasets of RS-2. The objectives of this study are to ensure the best absolute and relative location accuracy of different cameras, location performance with payload steering and co-registration of multiple bands. This is done using a viewing geometry model, given ephemeris and attitude data, precise camera geometry and datum transformation. In the model, the forward and reverse transformations between the coordinate systems associated with the focal plane, payload, body, orbit and ground are rigorously and explicitly defined. System level tests using comparisons to ground check points have validated the operational geo-location accuracy performance and the stability of the calibration parameters.

Basin-Scale Opportunity Assessment Initiative Background Literature Review

Energy Technology Data Exchange (ETDEWEB)

Saulsbury, Bo [ORNL; Geerlofs, Simon H. [Pacific Northwest National Laboratory (PNNL); Cada, Glenn F [ORNL; Bevelhimer, Mark S [ORNL

2010-10-01

As called for in the March 24, 2010, Memorandum of Understanding (MOU) for Hydropower, the U.S. Department of Energy (DOE), the U.S. Department of the Interior (DOI), the U.S. Army Corps of Engineers (USACE), environmental stakeholders, and the hydropower industry are collaborating to identify opportunities to simultaneously increase electricity generation and improve environmental services in river basins of the United States. New analytical tools provide an improved ability to understand, model, and visualize environmental and hydropower systems. Efficiencies and opportunities that might not be apparent in site-by-site analyses can be revealed through assessments at the river-basin scale. Information from basin-scale assessments could lead to better coordination of existing hydropower projects, or to inform siting decisions (e.g., balancing the removal of some dams with the construction of others), in order to meet renewable energy production and environmental goals. Basin-scale opportunity assessments would inform energy and environmental planning and address the cumulative effects of hydropower development and operations on river basin environmental quality in a way that quantifies energy-environment tradeoffs. Opportunity assessments would create information products, develop scenarios, and identify specific actions that agencies, developers, and stakeholders can take to locate new sustainable hydropower projects, increase the efficiency and environmental performance of existing projects, and restore and protect environmental quality in our nation's river basins. Government agencies and non-governmental organizations (NGO) have done significant work to understand and assess opportunities for both hydropower and environmental protection at the basin scale. Some initiatives have been successful, others less so, and there is a need to better understand the legacy of work on which this current project can build. This background literature review is intended

Performance assessment calculational exercises

International Nuclear Information System (INIS)

Barnard, R.W.; Dockery, H.A.

1990-01-01

The Performance Assessment Calculational Exercises (PACE) are an ongoing effort coordinated by Yucca Mountain Project Office. The objectives of fiscal year 1990 work, termed PACE-90, as outlined in the Department of Energy Performance Assessment (PA) Implementation Plan were to develop PA capabilities among Yucca Mountain Project (YMP) participants by calculating performance of a Yucca Mountain (YM) repository under ''expected'' and also ''disturbed'' conditions, to identify critical elements and processes necessary to assess the performance of YM, and to perform sensitivity studies on key parameters. It was expected that the PACE problems would aid in development of conceptual models and eventual evaluation of site data. The PACE-90 participants calculated transport of a selected set of radionuclides through a portion of Yucca Mountain for a period of 100,000 years. Results include analyses of fluid-flow profiles, development of a source term for radionuclide release, and simulations of contaminant transport in the fluid-flow field. Later work included development of a problem definition for perturbations to the originally modeled conditions and for some parametric sensitivity studies. 3 refs

Evaluation of a performance assessment methodology for low-level radioactive waste disposal facilities: Validation needs. Volume 2

Energy Technology Data Exchange (ETDEWEB)

Kozak, M.W.; Olague, N.E. [Sandia National Labs., Albuquerque, NM (United States)

1995-02-01

In this report, concepts on how validation fits into the scheme of developing confidence in performance assessments are introduced. A general framework for validation and confidence building in regulatory decision making is provided. It is found that traditional validation studies have a very limited role in developing site-specific confidence in performance assessments. Indeed, validation studies are shown to have a role only in the context that their results can narrow the scope of initial investigations that should be considered in a performance assessment. In addition, validation needs for performance assessment of low-level waste disposal facilities are discussed, and potential approaches to address those needs are suggested. These areas of topical research are ranked in order of importance based on relevance to a performance assessment and likelihood of success.

Evaluation of a performance assessment methodology for low-level radioactive waste disposal facilities: Validation needs. Volume 2

International Nuclear Information System (INIS)

Kozak, M.W.; Olague, N.E.

1995-02-01

In this report, concepts on how validation fits into the scheme of developing confidence in performance assessments are introduced. A general framework for validation and confidence building in regulatory decision making is provided. It is found that traditional validation studies have a very limited role in developing site-specific confidence in performance assessments. Indeed, validation studies are shown to have a role only in the context that their results can narrow the scope of initial investigations that should be considered in a performance assessment. In addition, validation needs for performance assessment of low-level waste disposal facilities are discussed, and potential approaches to address those needs are suggested. These areas of topical research are ranked in order of importance based on relevance to a performance assessment and likelihood of success

Effect of housing, initial weight and season on feedlot performance ...

African Journals Online (AJOL)

Feedlot information, submitted by Iowa cattle producers to the Iowa State University Feedlot Performance and Cost Monitoring Program, was examined to determine the effects of housing, initial weight and season interactions on beef steer performance. Feedlot information, consisting of 1225 pens of steers, contained ...

Applying probabilistic well-performance parameters to assessments of shale-gas resources

Science.gov (United States)

Charpentier, Ronald R.; Cook, Troy

2010-01-01

In assessing continuous oil and gas resources, such as shale gas, it is important to describe not only the ultimately producible volumes, but also the expected well performance. This description is critical to any cost analysis or production scheduling. A probabilistic approach facilitates (1) the inclusion of variability in well performance within a continuous accumulation, and (2) the use of data from developed accumulations as analogs for the assessment of undeveloped accumulations. In assessing continuous oil and gas resources of the United States, the U.S. Geological Survey analyzed production data from many shale-gas accumulations. Analyses of four of these accumulations (the Barnett, Woodford, Fayetteville, and Haynesville shales) are presented here as examples of the variability of well performance. For example, the distribution of initial monthly production rates for Barnett vertical wells shows a noticeable change with time, first increasing because of improved completion practices, then decreasing from a combination of decreased reservoir pressure (in infill wells) and drilling in less productive areas. Within a partially developed accumulation, historical production data from that accumulation can be used to estimate production characteristics of undrilled areas. An understanding of the probabilistic relations between variables, such as between initial production and decline rates, can improve estimates of ultimate production. Time trends or spatial trends in production data can be clarified by plots and maps. The data can also be divided into subsets depending on well-drilling or well-completion techniques, such as vertical in relation to horizontal wells. For hypothetical or lightly developed accumulations, one can either make comparisons to a specific well-developed accumulation or to the entire range of available developed accumulations. Comparison of the distributions of initial monthly production rates of the four shale-gas accumulations that were

Initial performance assessment of the disposal of spent nuclear fuel and high-level waste stored at Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

Rechard, R.P.

1993-12-01

This performance assessment characterized plausible treatment options conceived by the Idaho National Engineering Laboratory (INEL) for its spent fuel and high-level radioactive waste and then modeled the performance of the resulting waste forms in two hypothetical, deep, geologic repositories: one in bedded salt and the other in granite. The results of the performance assessment are intended to help guide INEL in its study of how to prepare wastes and spent fuel for eventual permanent disposal. This assessment was part of the Waste Management Technology Development Program designed to help the US Department of Energy develop and demonstrate the capability to dispose of its nuclear waste. Although numerous caveats must be placed on the results, the general findings were as follows: Though the waste form behavior depended upon the repository type, all current and proposed waste forms provided acceptable behavior in the salt and granite repositories

[Positron emission tomography combined with computed tomography in the initial evaluation and response assessment in primary central nervous system lymphoma].

Science.gov (United States)

Mercadal, Santiago; Cortés-Romera, Montserrat; Vélez, Patricia; Climent, Fina; Gámez, Cristina; González-Barca, Eva

2015-06-08

To evaluate the role of positron emission tomography combined with computed tomography (PET-CT) in the initial evaluation and response assessment in primary central nervous system lymphoma (PCNSL). Fourteen patients (8 males) with a median age 59.5 years diagnosed of PCNSL. A brain PET-CT and magnetic resonance imaging (MRI) were performed in the initial evaluation. In 7 patients a PET-CT after treatment was performed. PET-CT showed at diagnosis 31 hypermetabolic focuses and MRI showed 47 lesions, with a good grade of concordance between both (k = 0.61; P = .005). In the response assessment, correlation between both techniques was good, and PET-CT was helpful in the appreciation of residual MRI lesions. Overall survival at 2 years of negative vs. positive PET-CT at the end of treatment was 100 vs. 37.5%, respectively (P = .045). PET-CT can be useful in the initial evaluation of PCNSL, and especially in the assessment of response. Despite the fact that PET-CT detects less small lesions than MRI, a good correlation between MRI and PET-CT was observed. It is effective in the evaluation of residual lesions. Prospective studies are needed to confirm their possible prognostic value. Copyright © 2014 Elsevier España, S.L.U. All rights reserved.

DOE site performance assessment activities

International Nuclear Information System (INIS)

1990-07-01

Information on performance assessment capabilities and activities was collected from eight DOE sites. All eight sites either currently dispose of low-level radioactive waste (LLW) or plan to dispose of LLW in the near future. A survey questionnaire was developed and sent to key individuals involved in DOE Order 5820.2A performance assessment activities at each site. The sites surveyed included: Hanford Site (Hanford), Idaho National Engineering Laboratory (INEL), Los Alamos National Laboratory (LANL), Nevada Test Site (NTS), Oak Ridge National Laboratory (ORNL), Paducah Gaseous Diffusion Plant (Paducah), Portsmouth Gaseous Diffusion Plant (Portsmouth), and Savannah River Site (SRS). The questionnaire addressed all aspects of the performance assessment process; from waste source term to dose conversion factors. This report presents the information developed from the site questionnaire and provides a comparison of site-specific performance assessment approaches, data needs, and ongoing and planned activities. All sites are engaged in completing the radioactive waste disposal facility performance assessment required by DOE Order 5820.2A. Each site has achieved various degrees of progress and have identified a set of critical needs. Within several areas, however, the sites identified common needs and questions

Evolution in performance assessment modeling as a result of regulatory review

Energy Technology Data Exchange (ETDEWEB)

Rowat, J.H.; Dolinar, G.M.; Stephens, M.E. [AECL Chalk River Labs., Ontario (Canada)] [and others

1995-12-31

AECL is planning to build the IRUS (Intrusion Resistant Underground Structure) facility for near-surface disposal of LLRW. The PSAR (preliminary safety assessment report) was subject to an initial regulatory review during mid-1992. The regulatory authority provided comments on many aspects of the safety assessment documentation including a number of questions on specific PA (Performance Assessment) modelling assumptions. As a result of these comments as well as a separate detailed review of the IRUS disposal concept, changes were made to the conceptual and mathematical models. The original disposal concept included a non-sorbing vault backfill, with a strong reliance on the wasteform as a barrier. This concept was altered to decrease reliance on the wasteform by replacing the original backfill with a sand/clinoptilolite mix, which is a better sorber of metal cations. This change lead to changes in the PA models which in turn altered the safety case for the facility. This, and other changes that impacted performance assessment modelling are the subject of this paper.

Texas' performance assessment work

International Nuclear Information System (INIS)

Charbeneau, R.J.; Hertel, N.E.; Pollard, C.G.

1990-01-01

The Texas Low-Level Radioactive Waste Disposal Authority is completing two years of detailed on-site suitability studies of a potential low-level radioactive waste disposal site in Hudspeth County, Texas. The data from these studies have been used to estimate site specific parameters needed to do a performance assessment of the site. The radiological impacts of the site have been analyzed as required for a license application. The approach adopted for the performance assessment was to use simplified and yet conservative assumptions with regard to releases, radionuclide transport, and dose calculations. The methodologies employed in the performance assessment are reviewed in the paper. Rather than rely on a single computer code, a modular approach to the performance assessment was selected. The HELP code was used to calculate the infiltration rate through the trench covers and the amount of leachate released from this arid site. Individual pathway analyses used spreadsheet calculations. These calculations were compared with those from other computer models including CRRIS, INGDOS, PATHRAE, and MICROSHIELD copyright, and found to yield conservative estimates of the effective whole body dose. The greatest difficulty in performing the radiological assessment of the site was the selection of reasonable source terms for release into the environment. A surface water pathway is unreasonable for the site. Though also unlikely, the groundwater pathway with exposure through a site boundary well was found to yield the largest calculated dose. The more likely pathway including transport of leachate from the facility through the unsaturated zone and returning to the ground surface yields small doses. All calculated doses associated with normal releases of radioactivity are below the regulatory limits

A risk-informed approach to the assessment of DHC initiation in pressure tubes

International Nuclear Information System (INIS)

Sahoo, A.K.; Pandey, M.D.

2009-01-01

The delayed hydride cracking (DHC) of pressure tubes is a serious form of degradation in the reactor core. Flaws in pressure tubes generated by fretting or any other mechanism are potential stress raisers that could become sites of DHC initiation under right circumstances. CSA standard N285.8 recommends deterministic and probabilistic procedures for the assessment of potential for DHC initiation from planar flaws. The deterministic method is simple, but it lacks a risk-informed basis for the assessment. A full probabilistic method based on simulations is tedious to implement. This paper presents an innovative, semi-probabilistic method that bridges the gap between a simple deterministic analysis and complex simulations. In the proposed method, the deterministic assessment criterion of CSA N285.8 standard is calibrated to specified target probabilities of DHC initiation using the concept of partial factors. The main advantage of the proposed approach is that it provides a practical, risk-informed basis for DHC initiation assessment while retaining the simplicity of the deterministic method. (author)

77 FR 30022 - U.S. Extractive Industries Transparency Initiative Stakeholder Assessment Public Listening...

Science.gov (United States)

2012-05-21

... DEPARTMENT OF THE INTERIOR [Docket No. ONRR-2012-0003] U.S. Extractive Industries Transparency... Extractive Industries Transparency Initiative Stakeholder Assessment and Multi-Stakeholder Group Options. In... in the Extractive Industries Transparency Initiative. EITI is a signature initiative of the U.S...

Designing Second Language Performance Assessments. Technical Report.

Science.gov (United States)

Norris, John M.; Brown, James Dean; Hudson, Thom; Yoshioka, Jim

This technical report focuses on the decision-making potential provided by second language performance assessments. First, performance assessment is situated within the broader discussion of alternatives in language assessment and in educational assessment in general. Next, issues in performance assessment design, implementation, reliability, and…

Performance Assessment in Courts - The Swiss Case

Directory of Open Access Journals (Sweden)

Andreas Lienhard

2014-12-01

Full Text Available Abstract Performance assessments have become commonplace in management, even in the public sector. With the increasing pressure on courts to perform while making efficient use of resources, performance assessments in the justice system are also gaining in importance. However, the need for judicial independence poses special challenges for performance assessments in courts. Against this background, this article conducts a constitutional appraisal, and contrasts the need for judicial independence with the principles governing effectiveness and efficiency, self-government and supervision, and appointment and re-appointment. A duty to guarantee justice can be derived from this that does not in principle exclude the performance assessment of judges, but even renders it essential, subject to compliance with certain requirements. In these circumstances, it seems hardly surprising that numerous countries conduct performance assessments of judges and also that various international institutions have developed principles for this purpose, a summary of which is presented – in Switzerland’s case based on a recently conducted survey. In the field of conflict between the guaranteeing justice and protecting the judiciary, the following key questions arise in particular: What is the purpose of performance assessments and what are the consequences?What is subjected to a performance assessment and what are the assessment criteria?How is performance recorded as the basis for the performance assessment?Who is subjected to a performance assessment, and must a distinction be made between judges in higher and lower courts?Who carries out the performance assessment and what methods of protecting one’s rights are available?Who should receive the results of the performance assessment?The contribution sketches out possible answers to these key questions and aims to encourage academics and practitioners to give further consideration to this subject.

CEBAF SRF Performance during Initial 12 GeV Commissioning

International Nuclear Information System (INIS)

Bachimanchi, Ramakrishna; Allison, Trent; Daly, Edward; Drury, Michael; Hovater, J; Lahti, George; Mounts, Clyde; Nelson, Richard; Plawski, Tomasz

2015-09-01

The Continuous Electron Beam Accelerator Facility (CEBAF) energy upgrade from 6 GeV to 12 GeV includes the installation of eleven new 100 MV cryomodules (88 cavities). The superconducting RF cavities are designed to operate CW at an accelerating gradient of 19.3 MV/m with a Q L of 3x10 7 . Not all the cavities were operated at the minimum gradient of 19.3 MV/m with the beam. Though the initial 12 GeV milestones were achieved during the initial commissioning of CEBAF, there are still some issues to be addressed for long term reliable operation of these modules. This paper reports the operational experiences during the initial commissioning and the path forward to improve the performance of C100 (100 MV) modules.

Initial assessment of MHTGR confinement releases

International Nuclear Information System (INIS)

Maneke, J.L.; Lanning, D.D.; Lidsky, L.M.

1986-01-01

Initial investigation of Modular High Temperature Gas-Cooled Reactor (MHTGR) designs suggest that source terms during postulated accidents will be considerably lower than Light Water Reactor (LWR) source term estimates. These lower postulated accident releases are not only a safety incentive, but also an economic incentive for the development of this reactor type. For example, it is hoped that a filtered confinement building, rather than a more expensive LWR-like containment building, would adequately protect the public from radiological releases. The ability of a confinement building to satisfy safety requirements for the MHTGR depends on several reactor parameters, such as fuel quality, reactor design, and the design of the reactor building. SCIMCA, a Simple Code for Initial MHTGR Confinement Assessment has been developed for preliminary MHTGR building requirement calculations. The code is capable of modeling a decay chain with a maximum of five regions. Phenomena such as fission product decay and buildup, natural deposition, building filtration, and intercompartmental transport are incorporated. SCIMCA models reduction mechanisms, such as dispersion and decay, occurring as radioactivity is transported through the environment. A subroutine for calculating doses at specified distances has also been included

Health system professionals, attitude towards necessary criteria for hospitals managers, performance assessment

Directory of Open Access Journals (Sweden)

ali janati

2012-09-01

Materials and Methods: This study was a qualitative research with thematic analysis method. By using semi structured questionnaire with 2 health system experts interview was conducted and 20 experts participated in focus group discussion. After each interview and group discussion withdrawals were checked with participants. The initial interviews were analyzed by two faculty members and then were combined. Results: 7 main themes about necessary criteria for hospital managers, performance assessment were obtained from experts, views. These themes are: skills related to planning, organization and staff performance management, leadership, information management, clinical governance and performance indicators. Conclusion: All participants in the study had a history of hospital management therefore their comments will be an effective step in identifying the criteria for making hospital managers, performance assessment tool. In addition to Professionals, perspectives and studies done in other countries, in order to design this kind of tools, it is necessary to adjust the obtained findings according to the local hospital conditions.

Initiatives in the Hydro Sector Post-World Commission on Dams – The Hydropower Sustainability Assessment Forum

Directory of Open Access Journals (Sweden)

Helen Locher

2010-06-01

Full Text Available The World Commission on Dams (WCD has called for developers, governments, civil society, etc. to use its Strategic Priorities as a starting point for dialogue and initiatives to address issues regarding the development of dams. One very notable follow-up initiative has been led by the hydropower industry. The International Hydropower Association developed Sustainability Guidelines (IHA, 2004 and a Sustainability Assessment Protocol (IHA, 2006, and most recently has been involved in a two-year process with governments, NGOs and the finance sector to develop a broadly endorsed sustainability assessment tool based on review and update of the IHA Sustainability Assessment Protocol. This cross-sectoral process, known as the Hydropower Sustainability Assessment Forum (HSAF, has drawn on the knowledge base and many of the findings and recommendations of the World Commission on Dams, as well as a number of other developments in the last ten years. A fundamental premise of the work of the Forum is that an industry-driven and -owned initiative has far-reaching potential to influence performance in the hydropower sector. At the same time, the potential for the use of a broadly endorsed sustainability assessment tool for hydropower by those in other sectors is well recognised and aspired to by the Forum. This paper describes the work of the Forum up to August 2009 and the contents of the Draft Protocol released publicly in August 2009, and considers some of the commonalities and points of departure between this process and the WCD. The Forum’s work on the Hydropower Sustainability Assessment Protocol is a work in progress, so this paper can describe but not give a full analysis of the work while it is in train.

Performance Assessment National Review Group

International Nuclear Information System (INIS)

Lieberman, J.A.; Davis, S.N.; Harleman, D.R.F.

1985-02-01

Performance assessment involves predicting the potential radiological impact of a nuclear waste disposal system, taking into account all of the natural and engineered components of the system. It includes the analysis and evaluation of predicted system and component performance to determine compliance with regulatory performance criteria. In the context of the nuclear waste management program, performance assessment has five major purposes: to assist in the evaluation and selection of repository sites; to guide the research, development, and testing programs; to assist in the evaluation of repository designs; to assist in the evaluation of the design and performance of engineered barriers; and to show regulatory compliance and support repository licensing. Current performance assessment methodologies are still in the developmental stage. Only the simplest of bounding calculations have produced quantitative predictions of radionuclide releases. The methodologies require considerable extension and validation before they can provide answers suitable for project decisions and licensing. 135 refs., 9 figs., 1 tab

Context for performance assessment

International Nuclear Information System (INIS)

Kocher, D.C.

1997-01-01

In developing its recommendations on performance assessment for disposal of low-level radioactive waste, Scientific committee 87-3 of the National Council on Radiation Protection and Measurements (NCRP) has considered a number of topics that provide a context for the development of suitable approaches to performance assessment. This paper summarizes the Committee' discussions on these topics, including (1) the definition of low-level waste and its sources and properties, as they affect the variety of wastes that must be considered, (2) fundamental objectives and principles of radioactive waste disposal and their application to low-level waste, (3) current performance objectives for low-level waste disposal in the US, with particular emphasis on such unresolved issues of importance to performance assessment as the time frame for compliance, requirements for protection of groundwater and surface water, inclusion of doses from radon, demonstrating compliance with fixed performance objectives using highly uncertain model projections, and application of the principle that releases to the environment should be maintained as low as reasonably achievable (ALARA), (4) the role of active and passive institutional controls over disposal sites, (5) the role of the inadvertent human intruder in low-level waste disposal, (6) model validation and confidence in model outcomes, and (7) the concept of reasonable assurance of compliance

Operational human performance reliability assessment (OHPRA)

International Nuclear Information System (INIS)

Haas, P.M.; Swanson, P.J.; Connelly, E.M.

1993-01-01

Operational Human Performance Reliability Assessment (OHPRA) is an approach for assessing human performance that is being developed in response to demands from modern process industries for practical and effective tools to assess and improve human performance, and therefore overall system performance and safety. The single most distinguishing feature of the approach is that is defines human performance in open-quotes operationalclose quotes terms. OHPRA is focused not on generation of human error probabilities, but on practical analysis of human performance to aid management in (1) identifying open-quotes fixableclose quotes problems and (2) providing input on the importance and nature of potential improvements. Development of the model in progress uses a unique approach for eliciting expert strategies for assessing performance. A PC-based model incorporating this expertise is planned. A preliminary version of the approach has already been used successfully to identify practical human performance problems in reactor and chemical process plant operations

Compilation and comparison of radionuclide sorption databases used in recent performance assessments

International Nuclear Information System (INIS)

McKinley, I.G.; Scholtis, A.

1992-01-01

The aim of this paper is to review the radionuclide sorption databases which have been used in performance assessments published within the last decade. It was hoped that such a review would allow areas of consistency to be identified, possibly indicating nuclide/rock/water systems which are now well characterised. Inconsistencies, on the other hand, might indicate areas in which further work is required. This study followed on from a prior review of the various databases which had been used in Swiss performance assessments. The latter was, however, considerably simplified by the fact that the authors had been heavily involved in sorption database definition for these assessments. The first phase of the current study was based entirely on available literature and it was quickly evident that the analyses would be much more complex (and time consuming) than initially envisaged. While some assessments clearly list all sorption data used, others depend on secondary literature (which may or may not be clearly referenced) or present sorption data which has been transmogrified into another form (e.g. into a retardation factor -c.f. following section). This study focused on database used (or intended) for performance assessment which have been published within the last 10 years or so. 45 refs., 12 tabs., 1 fig

Evidence for validity within workplace assessment: the Longitudinal Evaluation of Performance (LEP).

Science.gov (United States)

Prescott-Clements, Linda; van der Vleuten, Cees P M; Schuwirth, Lambert W T; Hurst, Yvonne; Rennie, James S

2008-05-01

The drive towards valid and reliable assessment methods for health professions' training is becoming increasingly focused towards authentic models of workplace performance assessment. This study investigates the validity of such a method, longitudinal evaluation of performance (LEP), which has been implemented in the assessment of postgraduate dental trainees in Scotland. Although it is similar in format to the mini-CEX (mini clinical evaluation exercise) and other tools that use global ratings for assessing performance in the workplace, a number of differences exist in the way in which the LEP has been implemented. These include the use of a reference point for evaluators' judgement that represents the standard expected upon completion of the training, flexibility, a greater range of cases assessed and the use of frequency scores within feedback to identify trainees' progress over time. A range of qualitative and quantitative data were collected and analysed from 2 consecutive cohorts of trainees in Scotland (2002-03 and 2003-04). There is rich evidence supporting the validity, educational impact and feasibility of the LEP. In particular, a great deal of support was given by trainers for the use of a fixed reference point for judgements, despite initial concerns that this might be demotivating to trainees. Trainers were highly positive about this approach and considered it useful in identifying trainees' progress and helping to drive learning. The LEP has been successful in combining a strong formative approach to continuous assessment with the collection of evidence on performance within the workplace that (alongside other tools within an assessment system) can contribute towards a summative decision regarding competence.

Performance assessment in algebra learning process

Science.gov (United States)

Lestariani, Ida; Sujadi, Imam; Pramudya, Ikrar

2017-12-01

The purpose of research to describe the implementation of performance assessment on algebra learning process. The subject in this research is math educator of SMAN 1 Ngawi class X. This research includes descriptive qualitative research type. Techniques of data collecting are done by observation method, interview, and documentation. Data analysis technique is done by data reduction, data presentation, and conclusion. The results showed any indication that the steps taken by the educator in applying the performance assessment are 1) preparing individual worksheets and group worksheets, 2) preparing rubric assessments for independent worksheets and groups and 3) making performance assessments rubric to learners’ performance results with individual or groups task.

Lysimeter data as input to performance assessment source term codes

International Nuclear Information System (INIS)

McConnell, J.W. Jr.; Rogers, R.D.; Sullivan, T.

1992-01-01

The Field Lysimeter Investigation: Low-Level Waste Data Base Development Program is obtaining information on the performance of radioactive waste in a disposal environment. Waste forms fabricated using ion-exchange resins from EPICOR-II c prefilters employed in the cleanup of the Three Mile Island (TMI) Nuclear Power Station are being tested to develop a low-level waste data base and to obtain information on survivability of waste forms in a disposal environment. In this paper, radionuclide releases from waste forms in the first seven years of sampling are presented and discussed. Application of lysimeter data to be used in performance assessment source term models is presented. Initial results from use of data in two models are discussed

Review of SR 97 performance assessment

International Nuclear Information System (INIS)

Glynn, P.D.

2000-01-01

This review has identified many technical problems in the SR 97 performance assessment. The general impression of this reviewer is that SKB has been disingenuous in its performance assessment effort. It has not cited important differences of opinion with its own views. Furthermore, there are many inconsistencies in the SR 97 report that all together leave the impression that there are many more uncertainties in the SR 97 performance assessment than SKB would perhaps care to admit. Additionally, despite SKB's statements to the contrary, many of the analyses conducted for the SR 97 performance assessment can be clearly shown not to have been based on 'conservative' assumptions. Finally, SKB has made little effort to consider possible coupling effects between their different scenarios in SR 97. This is a serious flaw in the SR 97 performance assessment. The comments in this review should not be taken to imply that the KBS-3 nuclear waste disposal method will not be able to meet the safety and radiation protection requirements which SKI and SSI have specified in recent years. Instead, my conclusion is simply that the SR 97 performance assessment of the KBS-3 method would have been more believable had it been based on a forthright and comprehensive discussion of facts, uncertainties and opinions, and on a more conservative choice of assumptions. As it stands, the SR 97 performance assessment is not very credible

Does learning style influence academic performance in different forms of assessment?

Science.gov (United States)

Wilkinson, Tracey; Boohan, Mairead; Stevenson, Michael

2014-03-01

Educational research on learning styles has been conducted for some time, initially within the field of psychology. Recent research has widened to include more diverse disciplines, with greater emphasis on application. Although there are numerous instruments available to measure several different dimensions of learning style, it is generally accepted that styles differ, although the qualities of more than one style may be inherent in any one learner. But do these learning styles have a direct effect on student performance in examinations, specifically in different forms of assessment? For this study, hypotheses were formulated suggesting that academic performance is influenced by learning style. Using the Honey and Mumford Learning Style Questionnaire, learning styles of a cohort of first year medical and dental students at Queen's University Belfast were assessed. Pearson correlation was performed between the score for each of the four learning styles and the student examination results in a variety of subject areas (including anatomy) and in different types of assessments - single best answer, short answer questions and Objective Structured Clinical Examinations. In most of the analyses, there was no correlation between learning style and result and in the few cases where the correlations were statistically significant, they generally appeared to be weak. It seems therefore from this study that although the learning styles of students vary, they have little effect on academic performance, including in specific forms of assessment. © 2013 Anatomical Society.

Assessing personal initiative among vocational training students: development and validation of a new measure.

Science.gov (United States)

Balluerka, Nekane; Gorostiaga, Arantxa; Ulacia, Imanol

2014-11-14

Personal initiative characterizes people who are proactive, persistent and self-starting when facing the difficulties that arise in achieving goals. Despite its importance in the educational field there is a scarcity of measures to assess students' personal initiative. Thus, the aim of the present study was to develop a questionnaire to assess this variable in the academic environment and to validate it for adolescents and young adults. The sample comprised 244 vocational training students. The questionnaire showed a factor structure including three factors (Proactivity-Prosocial behavior, Persistence and Self-Starting) with acceptable indices of internal consistency (ranging between α = .57 and α =.73) and good convergent validity with respect to the Self-Reported Initiative scale. Evidence of external validity was also obtained based on the relationships between personal initiative and variables such as self-efficacy, enterprising attitude, responsibility and control aspirations, conscientiousness, and academic achievement. The results indicate that this new measure is very useful for assessing personal initiative among vocational training students.

Why do employees take more initiatives to improve their performance after co-developing performance measures? A field study

NARCIS (Netherlands)

Groen, B.A.C.; Wouters, M.J.F.; Wilderom, C.P.M.

2012-01-01

Performance measurements may stimulate employee initiatives to improve operational performance, especially when employees themselves participate in the development of their own departmental performance measures. Using the theory of planned behavior, we examine why this occurs in a beverage

Why do employees take more initiatives to improve their performance after co-developing performance measures? A field study.

NARCIS (Netherlands)

Groen, B.A.C.; Wouters, Marc; Wilderom, Celeste P.M.

2012-01-01

Performance measurements may stimulate employee initiatives to improve operational performance, especially when employees themselves participate in the development of their own departmental performance measures. Using the theory of planned behavior, we examine why this occurs in a beverage

Cascadia Initiative Ocean Bottom Seismograph Performance

Science.gov (United States)

Evers, B.; Aderhold, K.

2017-12-01

The Ocean Bottom Seismograph Instrument Pool (OBSIP) provided instrumentation and operations support for the Cascadia Initiative community experiment. This experiment investigated geophysical processes across the Cascadia subduction zone through a combination of onshore and offshore seismic data. The recovery of Year 4 instruments in September 2015 marked the conclusion of a multi-year experiment that utilized 60 ocean-bottom seismographs (OBSs) specifically designed for the subduction zone boundary, including shallow/deep water deployments and active fisheries. The new instruments featured trawl-resistant enclosures designed by Lamont-Doherty Earth Observatory (LDEO) and Scripps Institution of Oceanography (SIO) for shallow deployment [water depth ≤ 500 m], as well as new deep-water instruments designed by Woods Hole Oceanographic Institute (WHOI). Existing OBSIP instruments were also deployed along the Blanco Transform Fault and on the Gorda Plate through complementary experiments. Station instrumentation included weak and strong motion seismometers, differential pressure gauges (DPG) and absolute pressure gauges (APG). All data collected from the Cascadia, Blanco, and Gorda deployments is available through the Incorporated Research Institutions for Seismology (IRIS) Data Management Center (DMC). The Cascadia Initiative is the largest amphibious seismic experiment undertaken to date, encompassing a diverse technical implementation and demonstrating an effective structure for community experiments. Thus, the results from Cascadia serve as both a technical and operational resource for the development of future community experiments, such as might be contemplated as part of the SZ4D Initiative. To guide future efforts, we investigate and summarize the quality of the Cascadia OBS data using basic metrics such as instrument recovery and more advanced metrics such as noise characteristics through power spectral density analysis. We also use this broad and diverse

A performance assessment methodology for low-level radioactive waste disposal

International Nuclear Information System (INIS)

Deering, L.R.; Kozak, M.W.

1990-01-01

To demonstrate compliance with the performance objectives governing protection of the general population in 10 CFR 61.41, applicants for land disposal of low-level radioactive waste are required to conduct a pathways analysis, or quantitative evaluation of radionuclide release, transport through environmental media, and dose to man. The Nuclear Regulatory Commission staff defined a strategy and initiated a project at Sandia National Laboratories to develop a methodology for independently evaluating an applicant's analysis of postclosure performance. This performance assessment methodology was developed in five stages: (1) identification of environmental pathways, (2) ranking, the significance of the pathways, (3) identification and integration of models for pathway analyses, (4) identification and selection of computer codes and techniques for the methodology, and (5) implementation of the codes and documentation of the methodology. The final methodology implements analytical and simple numerical solutions for source term, ground-water flow and transport, surface water transport, air transport, food chain, and dosimetry analyses, as well as more complex numerical solutions for multidimensional or transient analyses when more detailed assessments are needed. The capability to perform both simple and complex analyses is accomplished through modular modeling, which permits substitution of various models and codes to analyze system components

C-Band Airport Surface Communications System Engineering-Initial High-Level Safety Risk Assessment and Mitigation

Science.gov (United States)

Zelkin, Natalie; Henriksen, Stephen

2011-01-01

This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." ITT has completed a safety hazard analysis providing a preliminary safety assessment for the proposed C-band (5091- to 5150-MHz) airport surface communication system. The assessment was performed following the guidelines outlined in the Federal Aviation Administration Safety Risk Management Guidance for System Acquisitions document. The safety analysis did not identify any hazards with an unacceptable risk, though a number of hazards with a medium risk were documented. This effort represents an initial high-level safety hazard analysis and notes the triggers for risk reassessment. A detailed safety hazards analysis is recommended as a follow-on activity to assess particular components of the C-band communication system after the profile is finalized and system rollout timing is determined. A security risk assessment has been performed by NASA as a parallel activity. While safety analysis is concerned with a prevention of accidental errors and failures, the security threat analysis focuses on deliberate attacks. Both processes identify the events that affect operation of the system; and from a safety perspective the security threats may present safety risks.

Initial assessment and treatment of refugees in the Mediterranean Sea (a secondary data analysis concerning the initial assessment and treatment of 2656 refugees rescued from distress at sea in support of the EUNAVFOR MED relief mission of the EU).

Science.gov (United States)

Kulla, M; Josse, F; Stierholz, M; Hossfeld, B; Lampl, L; Helm, M

2016-05-20

As a part of the European Union Naval Force - Mediterranean Operation Sophia (EUNAVFOR Med), the Federal Republic of Germany is contributing to avoid further loss of lives at sea by supplying two naval vessels. In the study presented here we analyse the medical requirements of such rescue missions, as well as the potential benefits of various additional monitoring devices in identifying sick/injured refugees within the primary onboard medical assessment process. Retrospective analysis of the data collected between May - September 2015 from a German Naval Force frigate. Initial data collection focused on the primary medical assessment and treatment process of refugees rescued from distress at sea. Descriptive statistics, uni- and multivariate analysis were performed. The study has received a positive vote from the Ethics Commission of the University of Ulm, Germany (request no. 284/15) and has been registered in the German Register of Clinical Studies (no. DRKS00009535). A total of 2656 refugees had been rescued. 16.9 % of them were classified as "medical treatment required" within the initial onboard medical assessment process. In addition to the clinical assessment by an emergency physician, pulse rate (PR), core body temperature (CBT) and oxygen saturation (SpO2) were evaluated. Sick/injured refugees displayed a statistically significant higher PR (114/min vs. 107/min; p refugee boats. A cut-off value of clinical importance could not be found. Predominant diagnoses have been dermatological diseases (55.4), followed by internal diseases (27.7) and trauma (12.1 %). None of the refugees classified as "healthy" within the primary medical assessment process changed to "medical treatment required" during further observation. The initial medical assessment by an emergency physician has proved successful. PR, CBT and SpO2 didn't have any clinical impact to improve the identification of sick/injured refugees within the primary onboard assessment process.

Characterisation of radionuclide migration and plant uptake for performance assessment

International Nuclear Information System (INIS)

Mathias, S. A.; Ireson, A. M.; Butler, A. P.; Jackson, B. M.; Wheater, H. S.

2008-01-01

Unsaturated vegetated soils are an important component in performance assessment models used to quantify risks associated with deep engineered repositories for underground radioactive waste disposal. Therefore, experimental studies, funded by Nirex over nearly 20 years, have been undertaken at Imperial College to study the transfer of radionuclides (Cl-36, I-129, Tc-99) from contaminated groundwater into crops. In parallel to this has been a modelling programme to aid interpretation of the experimental data, obtain parameter values characterising transport in soil and plant uptake and provide new representations of near-surface processes for performance assessment. A particular challenge in achieving these objectives is that the scale of the experimental work (typically ≤1 m) is much smaller than that required in performance assessment. In this paper, a new methodology is developed for up-scaling model results obtained at the experimental scale for use in catchment scale models. The method is based on characterising soil heterogeneity using soil texture. This has the advantage of allowing hydrological and radionuclide transport parameters to be correlated in a consistent manner. An initial investigation into the calculation of effective (i.e. up-scaled) hydrological and transport parameters has been undertaken and shows the results to be potentially highly (and non-linearly) sensitive to soil properties. Consequently, they have important implications for future site characterisation programmes supporting a proposed underground waste repository. (authors)

Developing a caries risk registry to support caries risk assessment and management for children: A quality improvement initiative.

Science.gov (United States)

Ruff, Jesley C; Herndon, Jill Boylston; Horton, Roger A; Lynch, Julie; Mathwig, Dawn C; Leonard, Audra; Aravamudhan, Krishna

2017-10-27

Health registries are commonly used in medicine to support public health activities and are increasingly used in quality improvement (QI) initiatives. Illustrations of dental registries and their QI applications are lacking. Within dentistry, caries risk assessment implementation and documentation are vital to optimal patient care. The purpose of this article is to describe the processes used to develop a caries risk assessment registry as a QI initiative to support clinical caries risk assessment, caries prevention, and disease management for children. Developmental steps reflected Agency for Healthcare Research and Quality recommendations for planning QI registries and included engaging "champions," defining the project, identifying registry features, defining performance dashboard indicators, and pilot testing with participant feedback. We followed Standards for Quality Improvement Reporting Excellence guidelines. Registry eligibility is patients aged 0-17 years. QI tools include prompts to register eligible patients; decision support tools grounded in evidence-based guidelines; and performance dashboard reports delivered at the provider and aggregated levels at regular intervals. The registry was successfully piloted in two practices with documented caries risk assessment increasing from 57 percent to 92 percent and positive feedback regarding the potential to improve dental practice patient centeredness, patient engagement and education, and quality of care. The caries risk assessment registry demonstrates how dental registries may be used in QI efforts to promote joint patient and provider engagement, foster shared decision making, and systematically collect patient information to generate timely and actionable data to improve care quality and patient outcomes at the individual and population levels. © 2017 American Association of Public Health Dentistry.

[Performance assessment of health services in Catalonia (Spain): evaluation of initial results of the Catalan healthcare service project].

Science.gov (United States)

García-Altés, Anna; Dalmau-Bueno, Albert; Colls, Cristina; Mendivil, Joan; Benet, Josep; Mompart, Anna; Torné, Elvira; Zara, Corinne; Borrell, Carme; Brugulat, Pilar; Guarga, Alex

2009-01-01

Performance assessment of healthcare services is receiving greater attention due to increasing health care expenditures, greater expectations among the population, and the need to obtain results from the invested resources. Taking advantage of the existing experience of the Agència de Salut Pública de Barcelona and the Consorci Sanitari de Barcelona, which compared the healthcare services of Barcelona and Montreal, a grant from the Agència d'Avaluació de Tecnologia i Recerca Mèdiques, and the health planning interest of the Departament de Salut, the performance assessment of the Catalan healthcare service project was started in Catalonia in 2005. This article aims to present the development of the project, to provide some examples that illustrate the kind of numerical and graphical information that could be obtained and the kind of analysis that could be performed, to provide possible explanations for the results shown, and to discuss some limitations and implications. Currently, the added value of this project is that it identifies the extent to which the healthcare system is achieving its objectives, establishes a set of homogeneous indicators that could be used in the future, and is a key tool in the development of the Central de Resultats del Departament de Salut de la Generalitat de Catalunya.

Assessing the impact of area-based initiatives in deprived neighborhoods

DEFF Research Database (Denmark)

Alves, Sonia

2017-01-01

assumptions, and social and spatial effects of these initiatives. Among other inter-related issues, the paper discusses the impact of conflicting ideologies upon processes of radical strategy shift and of social and territorial marginalization, and appeals to the need for more pluralistic approaches......Whilst there have been many area-based initiatives to regenerate rundown areas in numerous cities around the world, many of them involving the demolition of stigmatized housing estates, far fewer attempts have been made to assess the effects of these initiatives upon the fortunes of displaced...... households and those who remain in these areas. By presenting the results of an empirical in-depth case study on the effects of an area based initiative targeted at one of the most deprived neighborhoods in Porto, this paper raises several epistemological concerns related to the goals, ideological...

1997-1998 Annual Review of the 200 West and 200 East area performance assessments

International Nuclear Information System (INIS)

WOOD, M.I.

1999-01-01

An annual review of the 200 West and 200 East Area Performance Assessment (PA) analyses for fiscal year 1998 was completed. Burial ground disposal operations were found to be compliant with performance objectives in DOE Order 5820.2A. Other newly generated information and analyses relevant to PA assumptions and results were summarized. This report was initially submitted to the Department of Energy-Richland Office (DOE-RL) as a letter report in October, 1998

Teachers’ assessments of demonstration of student initiative

Directory of Open Access Journals (Sweden)

Komlenović Đurđica

2012-01-01

Full Text Available This paper explores student initiative or student engagement in activities in school environment, as an aspect of students’ functioning that is assumed to be a prerequisite for their contribution to the quality of instruction and better use of possibilities for education and development in school environment. We approach this topic from teachers’ perspective since it is our aim to observe how teachers assess the initiative of their students (how important it is, how it is manifested, how present it is in different segments of school activities. In the first part of the paper we analyze the construct “student initiative” and a similar construct “student engagement”. In the second part of the paper we present the results of a research in which primary school teachers (N=182 from the territory of Serbia expressed their views on student initiative. Teachers’ answers to open- and close-ended questions from the questionnaire (19 items in total were processed by quantitative and qualitative methodology. Research results indicate that the majority of teachers believed that student initiative was a very important general feature of behavior in school environment, independent of age, which was most present in the domain of peer socializing and relationship with teachers, and least present in the very domains of student functioning that teachers deemed the most desirable (mastering the curriculum, regulation of disciplinary issues. [Projekat Ministarstva nauke Republike Srbije, br. 179034: Od podsticanja inicijative, saradnje, stvaralaštva u obrazovanju do novih uloga i identiteta u društvu i br. 47008: Unapređivanje kvaliteta i dostupnosti obrazovanja u procesima modernizacije Srbije

Physiotherapy in hip and knee osteoarthritis: development of a practice guideline concerning initial assessment, treatment and evaluation.

Science.gov (United States)

Peter, W F; Jansen, M J; Hurkmans, E J; Bloo, H; Dekker, J; Dilling, R G; Hilberdink, W; Kersten-Smit, C; de Rooij, M; Veenhof, C; Vermeulen, H M; de Vos, R J; Schoones, J W; Vliet Vlieland, T P

2011-01-01

An update of a Dutch physiotherapy practice guideline in Hip and Knee Osteoarthritis (HKOA) was made, based on current evidence and best practice. A guideline steering committee, comprising 10 expert physiotherapists, selected topics concerning the guideline chapters: initial assessment, treatment and evaluation. With respect to treatment a systematic literature search was performed using various databases, and the evidence was graded (1-4). For the initial assessment and evaluation mainly review papers and textbooks were used. Based on evidence and expert opinion, recommendations were formulated. A first draft of the guideline was reviewed by 17 experts from different professional backgrounds. A second draft was field-tested by 45 physiotherapists. In total 11 topics were selected. For the initial assessment, three recommendations were formulated, pertaining to history taking, red flags, and formulating treatment goals. Concerning treatment, 7 recommendations were formulated; (supervised) exercise therapy, education and self management interventions, a combination of exercise and manual therapy, postoperative exercise therapy and taping of the patella were recommended. Balneotherapy and hydrotherapy in HKOA, and thermotherapy, TENS, and Continuous Passive Motion in knee OA were neither recommended nor discouraged. Massage therapy, ultrasound, electrotherapy, electromagnetic field, Low Level Laser Therapy, preoperative physiotherapy and education could not be recommended. For the evaluation of treatment goals the following measurement instruments were recommended: Lequesne index, Western Ontario and McMaster Universities osteoarthritis index, Hip disability and Osteoarthritis Outcome Score and Knee injury and Osteoarthritis Outcome Score, 6-minute walktest, Timed Up and Go test, Patient Specific Complaint list, Visual Analoge Scale for pain, Intermittent and Constant OsteoArthritis Pain Questionnaire, goniometry, Medical Research Council for strength, handheld

Sonographic findings of thyroid cancer initially assessed as no suspicious malignancy

International Nuclear Information System (INIS)

Kim, Do Youn; Kang, Seok Seon; Ji, Eun Kyung; Kwon, Tae Hee; Park, Hae Lin; Shim, Jeong Yun

2008-01-01

To review the retrospective imaging findings of thyroid cancer initially assessed as no suspicious malignancy. Of 338 nodules confirmed to be thyroid cancer, this study included 38 patients with 39 nodules assessed as no suspicious malignancy on initial sonography. (mean age:39 years, 36 females and 2 males). We evaluated sonographic findings by shape, margin, echogenecity, calcification, cystic degeneration and peripheral hypoechoic rim retrospectively. We analyzed whether sonographic findings were different according to the size (standard:1 cm). The most frequent sonographic findings were avoid to round shape 90%, well-defined smooth margin 64%, hypoechogenecity 54%, no calcification 92%, no cystic degeneration 77% and peripheral hypoechoic rim 56%. Suspicious malignancy findings were taller than wide shape 10%, well-defined spiculated margin 36%, markedly hypoechogenecity 10% and microcalcifications 8%. Isoechogenecity, cystic degeneration and peripheral hypoechoic rim were common in 1 cm more than nodules. Well-defined spiculated margin was common in 1 cm less than nodules. In retrospective, 56% showed no suspicious malignancy finding. Although nodules assessed as no suspicious malignancy on initial US had many retrospectively suspicious malignancy findings, still many nodules showed no suspicious malignancy finding. Suspicious findings were ignored due to equivocal finding in small size, isoechogenecity, cystic degeneration or peripheral hypoechoic rim. We need careful observation

Prior academic background and student performance in assessment in a graduate entry programme.

Science.gov (United States)

Craig, P L; Gordon, J J; Clark, R M; Langendyk, V

2004-11-01

This study aims to identify whether non-science graduates perform as well as science graduates in Basic and Clinical Sciences (B & CS) assessments during Years 1-3 of a four-year graduate-entry programme at the University of Sydney (the 'USydMP'). Students were grouped into five categories: Health Professions (HP), Biomedical Sciences (BMS), Other Biology (BIOL), Physical Sciences (PHYS) or Non-Science (NONS). We examined the performance rank of students in each of the five groups for single best answer (SBA) and modified essay (MEQ) assessments separately, and also calculated the relative risk of failure in the summative assessments in Years 2 and 3. Students with science-based prior degrees performed better in the SBA assessments. The same occurred initially in the MEQs, but the effect diminished with time. The HP students performed consistently better but converged with other groups over time, particularly in the MEQs. Relative performance by the NONS students improved with time in both assessment formats. Overall, differences between the highest and lowest groups were small and very few students failed to meet the overall standard for the summative assessments. HP and BMS students had the lowest failure rate. NONS students were more likely to fail the assessments in Year 2 and 3, but their pass rates were still high. Female students performed significantly better overall at the end of Year 2 and in Year 3. There were only minor differences between Australian resident and International students. While there are small differences in performance in B & CS early in the programme, these lessen with time. The study results will inform decisions regarding timing of summative assessments, selection policy and for providing additional support to students who need it to minimize their risk of failure. Readers should note that this paper refers to student performance in only one of the four curriculum themes, where health professional and science graduates would be

PERFORMANCE ASSESSMENT FOR FIELD SPORTS

Directory of Open Access Journals (Sweden)

Christopher Carling

2009-03-01

Full Text Available DESCRIPTION The book covers the various sport science assessment procedures for sports such as soccer, rugby, field hockey and lacrosse. It provides detailed and clear information about laboratory and field-based methods that can be used to assess and improve both individual and team performance. PURPOSE The book aims to provide a contemporary reference tool for selection of appropriate testing procedures for sports across a range of scientific disciplines. FEATURES The text begins with a chapter on the rationales for performance assessments, the use of technology and the necessity for procedures to conform to scientific rigor, explaining the importance of test criteria. This chapter ends by emphasizing the importance of the feedback process and vital considerations for the practitioner when interpreting the data, selecting which information is most important and how to deliver this back to the athlete or coach in order to deliver a positive performance outcome. The next two chapters focus on psychological assessments with respect to skill acquisition, retention and execution providing a variety of qualitative and quantitative options, underpinned with scientific theory and contextualized in order to improve the understanding of the application of these methods to improve anticipation and decision-making to enhance game intelligence.Chapter 4 provides coverage of match analysis techniques in order to make assessments of technical, tactical and physical performances. Readers learn about a series of methodologies ranging from simplistic pen and paper options through to sophisticated technological systems with some exemplar data also provided. Chapters 5 through 7 cover the physiological based assessments, including aerobic, anaerobic and anthropometric procedures. Each chapter delivers a theoretical opening section before progressing to various assessment options and the authors make great efforts to relate to sport-specific settings. The final

Performance assessment: a peer review

International Nuclear Information System (INIS)

Lieberman, J.A.; Lee, W.W.L.

1986-01-01

This paper describes the rationale, membership, operation and major observations of the Performance Assessment National Review Group. The Group was assembled by Weston at the request of the US Department of Energy Office of Civilian Radioactive Waste Management to review performance assessment work in the US basalt, salt and tuff repository projects. The purposes were to evaluate the adequacy of the current methods, identify deficiencies, and suggest potential improvement on repository performance assessment. To perform the review, Weston retained a group of distinguished consultants who have had extensive experience in disciplines pertinent to management of radioactive wastes including mathematical modeling of fluid transport. Topics reviewed included flow and transport, source term and uncertainty analysis. While the emphasis was on methodologies, the Projects were specifically requested to show currently available results so that the way they utilized familiar methodologies could be evaluated. This paper will highlight some of the technical observations of the Group as well as some managerial and institutional issues

Making Performance Assessments a Part of Accountability

Science.gov (United States)

Haun, Billy

2018-01-01

The purpose of this commentary is to describe recent efforts in Virginia to develop and use performance assessments, including the challenges that emerged during this process and key considerations for states that integrate performance assessment into their systems. Performance assessments can play an important role in preparing students for…

Development and initial validation of an instrument to assess stressors among South African sports coaches.

Science.gov (United States)

Kubayi, Alliance; Toriola, Abel; Didymus, Faye

2018-06-01

The aim of this series of studies was to develop and initially validate an instrument to assess stressors among South African sports coaches. In study one, a preliminary pool of 45 items was developed based on existing literature and an expert panel was employed to assess the content validity and applicability of these items. In study two, the 32 items that were retained after study one were analysed using principal component analysis (PCA). The resultant factorial structure comprised four components: environmental stressors, performance stressors, task-related stressors, and athlete stressors. These four components were made up of 26 items and, together, the components and items comprised the provisional Stressors in Sports Coaching Questionnaire (SSCQ). The results show that the SSCQ demonstrates acceptable internal consistency (.73-.89). The findings provide preliminary evidence that SSCQ is a valid tool to assess stressors among South African sports coaches.

Performance Assessment of Mergers and Acquisitions

DEFF Research Database (Denmark)

Wang, Daojuan; Moini, Hamid

2012-01-01

on the performance measures and benchmarks adopted in M&A research field and the relevant empirical results. We find that the definitions of performance varied in terms of accounting, financial, operational and perceptual metrics. And performance assessment is sensitive to the definition of performance, methodology......Corporate mergers and acquisitions (M&As) have been increasing popular during these decades. However, a majority of research show failure rate (40% - 80%) has not significantly changed. This “success paradox” triggers us to reflect on performance assessment of M&As: how the performance of M...

Level-2 Milestone 5588: Deliver Strategic Plan and Initial Scalability Assessment by Advanced Architecture and Portability Specialists Team

Energy Technology Data Exchange (ETDEWEB)

Draeger, Erik W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-09-30

This report documents the fact that the work in creating a strategic plan and beginning customer engagements has been completed. The description of milestone is: The newly formed advanced architecture and portability specialists (AAPS) team will develop a strategic plan to meet the goals of 1) sharing knowledge and experience with code teams to ensure that ASC codes run well on new architectures, and 2) supplying skilled computational scientists to put the strategy into practice. The plan will be delivered to ASC management in the first quarter. By the fourth quarter, the team will identify their first customers within PEM and IC, perform an initial assessment and scalability and performance bottleneck for next-generation architectures, and embed AAPS team members with customer code teams to assist with initial portability development within standalone kernels or proxy applications.

Power performance assessment. Final report

International Nuclear Information System (INIS)

Frandsen, S.

1998-12-01

In the increasingly commercialised wind power marketplace, the lack of precise assessment methods for the output of an investment is becoming a barrier for wider penetration of wind power. Thus, addressing this problem, the overall objectives of the project are to reduce the financial risk in investment in wind power projects by significantly improving the power performance assessment methods. Ultimately, if this objective is successfully met, the project may also result in improved tuning of the individual wind turbines and in optimisation methods for wind farm operation. The immediate, measurable objectives of the project are: To prepare a review of existing contractual aspects of power performance verification procedures of wind farms; to provide information on production sensitivity to specific terrain characteristics and wind turbine parameters by analyses of a larger number of wind farm power performance data available to the proposers; to improve the understanding of the physical parameters connected to power performance in complex environment by comparing real-life wind farm power performance data with 3D computational flow models and 3D-turbulence wind turbine models; to develop the statistical framework including uncertainty analysis for power performance assessment in complex environments; and to propose one or more procedures for power performance evaluation of wind power plants in complex environments to be applied in contractual agreements between purchasers and manufacturers on production warranties. Although the focus in this project is on power performance assessment the possible results will also be of benefit to energy yield forecasting, since the two tasks are strongly related. (au) JOULE III. 66 refs.; In Co-operation Renewable Energy System Ltd. (GB); Centre for Renewable Energy (GR); Aeronautic Research Centre (SE); National Engineering Lab. (GB); Public Power Cooperation (GR)

[Development and validation of an instrument for initial nursing assessment].

Science.gov (United States)

Fernández-Sola, Cayetano; Granero-Molina, José; Mollinedo-Mallea, Judith; de Gonzales, María Hilda Peredo; Aguilera-Manrique, Gabriel; Ponce, Mara Luna

2012-12-01

The objective of this study, conducted in Bolivia from April to July of 2008, is the design and validation of an initial nursing assessment instrument to be used in clinical and educational environments in Santa Cruz (Bolivia). Twelve Bolivian nurses participated; both document analysis as well as consensus techniques were used to determine the categories and criteria to be assessed. Categories included in the nursing assessment instrument are a physical assessment and the eleven Gordon's Functional Health Patterns. The nursing assessment instrument stands out as being concise, easy to complete and utilizing a nursing approach. It does not include items for advanced nursing assessment. However, it incorporates items regarding lifestyle and the patient's autonomy. The nursing assessment instrument contributes to improving the quality of clinical records, supports the nursing diagnosis and implementation of the nursing process, promotes the nurse's role and helps to standardize practice.

Sustainability Performance of Scandinavian Corporations and their Value Chains assessed by UN Global Compact and Global Reporting Initiative standards - a way to identify superior performers?

DEFF Research Database (Denmark)

Kjærgaard, Thomas

2014-01-01

The purpose of this study was to introduce a combination of the two most adopted multi- stakeholder standards for sustainability reporting as an alternate framework for assessing sustainability performance in Scandinavian corporations. This novel approach leverages numeric measures on the criteria...

Conceptual framework for performance assessment: competency, competence and performance in the context of assessments in healthcare--deciphering the terminology.

Science.gov (United States)

Khan, Kamran; Ramachandran, Sankaranarayanan

2012-01-01

The definitions of performance, competence and competency are not very clear in the literature. The assessment of performance and the selection of tools for this purpose depend upon a deep understanding of each of the above terms and the factors influencing performance. In this article, we distinguish between competence and competency and explain the relationship of competence and performance in the light of the Dreyfus model of skills acquisition. We briefly critique the application of the principles described by Miller to the modern assessment tools and distinguish between assessment of actual performance in workplace settings and the observed performance, demonstrated by the candidates in the workplace or simulated settings. We describe a modification of the Dreyfus model applicable to assessments in healthcare and propose a new model for the assessment of performance and performance rating scale (PRS) based on this model. We propose that the use of adapted versions of this PRS will result in benchmarking of performance and allowing the candidates to track their progression of skills in various areas of clinical practice.

Competency Assessment Using Key Performance Indicators

OpenAIRE

Elena Alexandra Toader; Laura Brad

2015-01-01

The paper proposes a method for computing the scores of the key performance indicators resulted in the competency assessment process. The key performance indicators are estimated considering four performance levels that an IT professional can obtain at the end of the assessment process. We suggest as the best approach for estimating the performance key indicators an online questionnaire filled by 60 employees that work in IT Romanian companies. The results provide evidence that the difference...

A performance assessment methodology for low-level radioactive waste disposal

International Nuclear Information System (INIS)

Derring, L.R.

1990-01-01

To demonstrate compliance with the performance objectives governing protection of the general population in 10 CFR 61.41, applicants for land disposal of low-level radioactive waste are required to conduct a pathways analysis, or quantitative evaluation of radionuclide release, transport through environmental media, and dose to man. The Nuclear Regulatory Commission staff defined a strategy and initiated a project at Sandia National Laboratories to develop a methodology for independently evaluating an applicant's analysis of postclosure performance. This performance assessment methodology was developed in five stages: identification of environmental pathways, ranking the significance of the pathways, identification and integration of models for pathway analyses, identification and selection of computer codes and techniques for the methodology, and implementation of the codes and documentation of the methodology. This paper summarizes the NRC approach for conducting evaluations of license applications for low-level radioactive waste facilities. 23 refs

Assessing Scientific Performance.

Science.gov (United States)

Weiner, John M.; And Others

1984-01-01

A method for assessing scientific performance based on relationships displayed numerically in published documents is proposed and illustrated using published documents in pediatric oncology for the period 1979-1982. Contributions of a major clinical investigations group, the Childrens Cancer Study Group, are analyzed. Twenty-nine references are…

40 CFR 300.305 - Phase II-Preliminary assessment and initiation of action.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 27 2010-07-01 2010-07-01 false Phase II-Preliminary assessment and initiation of action. 300.305 Section 300.305 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... the OSC is informed of their activities in natural resource damage assessment that may affect response...

40 CFR 60.4405 - How do I perform the initial performance test if I have chosen to install a NOX-diluent CEMS?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false How do I perform the initial... § 60.4405 How do I perform the initial performance test if I have chosen to install a NOX-diluent CEMS... of nine RATA reference method runs, with a minimum time per run of 21 minutes, at a single load level...

How Do States Integrate Performance Assessment in Their Systems of Assessment?

Science.gov (United States)

Stosich, Elizabeth Leisy; Snyder, Jon; Wilczak, Katie

2018-01-01

This paper reviews state strategies for incorporating performance assessment in policy and practice. Specifically, the paper reviews the use of performance assessment in 12 states in the Innovation Lab Network, a group committed to developing systems of assessment that provide meaningful measures of college and career readiness. This review…

Initial assessments of ignition spherical torus

International Nuclear Information System (INIS)

Peng, Y.K.M.; Borowski, S.K.; Bussell, G.T.

1985-12-01

Initial assessments of ignition spherical tori suggest that they can be highly cost effective and exceptionally small in unit size. Assuming advanced methods of current drive to ramp up the plasma current (e.g., via lower hybrid wave at modest plasma densities and temperatures), the inductive solenoid can largely be eliminated. Given the uncertainties in plasma energy confinement times and the effects of strong paramagnetism on plasma pressure, and allowing for the possible use of high-strength copper alloys (e.g., C-17510, Cu-Ni-Be alloy), ignition spherical tori with a 50-s burn are estimated to have major radii ranging from 1.0 to 1.6 m, aspect ratios from 1.4 to 1.7, vacuum toroidal fields from 2 to 3 T, plasma currents from 10 to 19 MA, and fusion power from 50 to 300 MW. Because of its modest field strength and simple poloidal field coil configuration, only conventional engineering approaches are needed in the design. A free-standing toroidal field coil/vacuum vessel structure is assessed to be feasible and relatively independent of the shield structure and the poloidal field coils. This exceptionally simple configuration depends significantly, however, on practical fabrication approaches of the center conductor post, about which there is presently little experience. 19 refs

Customized Assessment Group Initiative: A Complementary Approach to Students' Learning

Science.gov (United States)

Akindayomi, Akinloye

2015-01-01

This study, conducted in a US setting, examines the importance of group dynamics that emphasize cooperative team building through the proposed grouping strategy called Customized Assessment Group Initiative (CAGI). CAGI is a student grouping strategy designed to operationalize the mutual accountability concept central to the definition of teams by…

Comparison of probabilistic approaches to estimate the initial bacterial levels as a start in exposure assessment: Escherichia coli O157:H7 in beef as an example

NARCIS (Netherlands)

Hoornstra, E.; Telman, J.

2008-01-01

The initial contamination of food products with pathogens is an important risk factor in microbial risk assessments. This factor contains variability and uncertainty that can be calculated from various available monitoring results. When performing dedicated quantitative risk assessments, different

INITIAL PUBLIC OFFERING AND PERFORMANCE OF BRAZILIAN FIRMS

Directory of Open Access Journals (Sweden)

Teresa Rodriguez Cao

2016-07-01

Full Text Available This paper investigates changes in long-term operational and financial performance for a sample of Brazilian companies made initial public offerings (IPO's shares, in the period 2002-2008. This period showed a historically high number of IPOs, a heavily discontinued phenomenon with the international financial crisis of 2008. As performance measures were chosen six financial indicators usually adopted in the literature in periods of three years pre-IPO, year of listing and three years post-IPO. The indicators evaluated were size, growth rate, profitability, financial leverage, investment level and investment rate. The results show evidence that, on average, there were statistically significant improvements in size, profitability, investment level and investment rate. But there was no evidence statistically significant changes in the growth rate and financial leverage after the IPO of Brazilian firms.

Formative Assessment, Communication Skills and ICT in Initial Teacher Training

Science.gov (United States)

Romero-Martín, M. Rosario; Castejón-Oliva, Francisco-Javier; López-Pastor, Víctor-Manuel; Fraile-Aranda, Antonio

2017-01-01

The purpose of this study is to analyze the perception of students, graduates, and lecturers in relation to systems of formative and shared assessment and to the acquisition of teaching competences regarding communication and the use of Information and Communications Technology (ICT) in initial teacher education (ITE) on degrees in Primary…

Parametric Study on an Initial Cooling Performance in the KALIMER-600

International Nuclear Information System (INIS)

Han, Ji-Woong; Eoh, Jae-Hyuk; Lee, Tae-Ho; Kim, Seong-O

2009-01-01

Decay heat removal is very important in a nuclear power plant. The KALIMER-600, Korea Advanced Liquid MEtal Reactor, employs the PDRC(Passive Decay heat Removal Circuit) to remove the decay heat. DHX(Decay Heat eXchanger) in the PDRC of KALIMER-600 is disposed in the DHX support barrel located in the hot pool region. Each DHX support barrel has the lower end communicating with the cold pool such that the sodium free surface inside the barrel is maintained with the same level of the cold pool using the pumping head of the PHTS(Primary Heat Transport System) pumps. Consequently, DHX is not in direct contact with the cold pool sodium during a normal plant operation. Under transient conditions such as the loss of a normal heat sink accident, free surface outside the barrel rises up due to the expansion of the sodium induced by the core decay heat during the initial stage cooling. When it overflows into the cold pool through the DHX support barrel the heat removal via DHX is initiated and the second stage cooling begins. In order to secure the safety of a reactor until the activation of a second stage cooling by PDRC, it is very important to suppress the core temperature rising by an enhancement of the initial cooling performance. In this study the parametric investigations have been applied to reveal the effect of various design parameters on the initial cooling performance. The various design parameters such as coastdown flow, IHX(Intermediate Heat eXchanger) elevation, heat transfer via CCS (Cavity Cooling System) were considered. The numerical approaches based on a multidimensional analysis can be utilized as a useful tool to investigate overall transient behaviors within a pool. In this research the COMMIX-1AR/P code is utilized as a transient analysis tool in KALIMER-600 after a shut down. This study will provide the basic design information to improve the initial cooling performance in the KALIMER-600

Performance assessment review for DOE LLW disposal facilities

International Nuclear Information System (INIS)

Wilhite, Elmer L.

1992-01-01

The United States Department of Energy (US DOE) disposes of low-level radioactive waste in near-surface disposal facilities. Safety of the disposal operations is evaluated for operational safety as well as long-term safety. Operational safety is evaluated based on the perceived level of hazard of the operation and may vary from a simple safety assessment to a safety analysis report. Long-term safety of all low-level waste disposal systems is evaluated through the conduct of a radiological performance assessment. The US DOE has established radiological performance objectives for disposal of low-level waste. They are to protect a member of the general public from receiving over 25 mrem/y, and an inadvertent intruder into the waste from receiving over 100 mrem/y continuous exposure or 500 mrem from a single exposure. For a disposal system to be acceptable, a performance assessment must be prepared which must be technically accurate and provide reasonable assurance that these performance objectives are met. Technical quality of the performance assessments is reviewed by a panel of experts. The panel of experts is used in two ways to assure the technical quality of performance assessment. A preliminary (generally 2 day) review by the panel is employed in the late stages of development to provide guidance on finalizing the performance assessment. The comments from this review are communicated to the personnel responsible for the performance assessment for consideration and incorporation. After finalizing the performance assessment, it is submitted for a formal review. The formal review is accomplished by a much more thorough analysis of the performance assessment over a multi-week time period. The panel then formally reports their recommendations to the US DOE waste management senior staff who make the final determination on acceptability of the performance assessment. A number of lessons have been learned from conducting several preliminary reviews of performance

Assessing Social Value in Open Data Initiatives: A Framework

Directory of Open Access Journals (Sweden)

Gianluigi Viscusi

2014-08-01

Full Text Available Open data initiatives are characterized, in several countries, by a great extension of the number of data sets made available for access by public administrations, constituencies, businesses and other actors, such as journalists, international institutions and academics, to mention a few. However, most of the open data sets rely on selection criteria, based on a technology-driven perspective, rather than a focus on the potential public and social value of data to be published. Several experiences and reports confirm this issue, such as those of the Open Data Census. However, there are also relevant best practices. The goal of this paper is to investigate the different dimensions of a framework suitable to support public administrations, as well as constituencies, in assessing and benchmarking the social value of open data initiatives. The framework is tested on three initiatives, referring to three different countries, Italy, the United Kingdom and Tunisia. The countries have been selected to provide a focus on European and Mediterranean countries, considering also the difference in legal frameworks (civic law vs. common law countries.

Assessment of fragment projection hazard: probability distributions for the initial direction of fragments.

Science.gov (United States)

Tugnoli, Alessandro; Gubinelli, Gianfilippo; Landucci, Gabriele; Cozzani, Valerio

2014-08-30

The evaluation of the initial direction and velocity of the fragments generated in the fragmentation of a vessel due to internal pressure is an important information in the assessment of damage caused by fragments, in particular within the quantitative risk assessment (QRA) of chemical and process plants. In the present study an approach is proposed to the identification and validation of probability density functions (pdfs) for the initial direction of the fragments. A detailed review of a large number of past accidents provided the background information for the validation procedure. A specific method was developed for the validation of the proposed pdfs. Validated pdfs were obtained for both the vertical and horizontal angles of projection and for the initial velocity of the fragments. Copyright © 2014 Elsevier B.V. All rights reserved.

Initial Opposition--Won't Portfolio Assessment Take Away Teacher Autonomy?

Science.gov (United States)

Dickson, Marcia

Unacknowledged and untended opposition can lead the "resistance" to destroy even the best planned of portfolio systems. The greatest cause of initial resistance to portfolio assessment is the fear that teachers will lose their autonomy and/or authority in the classroom. Writing instructors need to ask themselves about issues of control and…

Assessment of self-efficacy to employ self-initiated pornography use-reduction strategies.

Science.gov (United States)

Kraus, Shane W; Rosenberg, Harold; Tompsett, Carolyn J

2015-01-01

This study evaluated several psychometric properties of a newly developed questionnaire designed to assess individuals' self-efficacy (from 0% to 100%) to employ self-initiated cognitive-behavioral strategies intended to reduce the frequency and duration of their pornography use. Using a web-based data collection procedure, we recruited 1298 male users of pornography to complete questionnaires assessing hypersexuality, pornography use history, and general self-efficacy. Based on a principal component analysis and examination of inter-item correlations, we deleted 13 items from the initial pool of 21 strategies. The resulting 8-item questionnaire had excellent internal consistency reliability, and a moderate mean inter-item correlation considered indicative of unidimensionality. In support of criterion validity, self-efficacy to employ use-reduction strategies was significantly associated with the frequency with which participants used pornography, with scores on a measure of hypersexuality, and with the number of times one had attempted to cut back using pornography. In support of discriminant validity, we found that pornography use-reduction self-efficacy scores were not strongly correlated with general self-efficacy. Both researchers and clinicians could use this questionnaire to assess pornography users' confidence to employ self-initiated strategies intended to reduce the duration and frequency with which they use pornography. Published by Elsevier Ltd.

Initial state report for the safety assessment SR-Can

Energy Technology Data Exchange (ETDEWEB)

Pers, Karin (ed.) [Kemakta Konsult AB, Stockholm (Sweden)

2006-10-15

A comprehensive description of the initial state of the engineered parts of the repository system is one of the main bases for the safety assessment. There is no obvious definition of the time of the initial state. For the engineered part of their repository system, the time of deposition is a natural starting point and the initial state in SR-Can is, therefore, defined as the state at the time of deposition for the engineered barrier system. The initial state of the engineered parts of the repository system is largely obtained from the design specifications of the repository, including allowed tolerances or allowance for deviations. Also the manufacturing, excavation and control methods have to be described in order to adequately discuss and handle hypothetical initial states outside the allowed limits in the design specifications. It should also be noted that many parts of the repository system are as yet not finally designed, there can be many changes in the future. The design and technical solutions presented here are representative of the current stage of development. The repository system is based on the KBS-3 method, in which copper canisters with a cast iron insert containing spent nuclear fuel are surrounded by bentonite clay and deposited at 400-700 m depth in saturated granitic rock. The facility design comprises rock caverns, tunnels, deposition positions etc. Deposition tunnels are linked by tunnels for transport and communication and shafts for ventilation. One ramp and five shafts connect the surface facility to the underground repository. The ramp is used for heavy and bulky transports and the shafts are for utility systems and for transport of excavated rock, backfill and staff. For the purposes of the safety assessment, the engineered parts of the repository system have been sub-divided into a number of components or sub-systems. These are: The fuel, (also including cavities in the canister since strong interactions between the two occur if the

Initial state report for the safety assessment SR-Can

International Nuclear Information System (INIS)

Pers, Karin

2006-10-01

A comprehensive description of the initial state of the engineered parts of the repository system is one of the main bases for the safety assessment. There is no obvious definition of the time of the initial state. For the engineered part of their repository system, the time of deposition is a natural starting point and the initial state in SR-Can is, therefore, defined as the state at the time of deposition for the engineered barrier system. The initial state of the engineered parts of the repository system is largely obtained from the design specifications of the repository, including allowed tolerances or allowance for deviations. Also the manufacturing, excavation and control methods have to be described in order to adequately discuss and handle hypothetical initial states outside the allowed limits in the design specifications. It should also be noted that many parts of the repository system are as yet not finally designed, there can be many changes in the future. The design and technical solutions presented here are representative of the current stage of development. The repository system is based on the KBS-3 method, in which copper canisters with a cast iron insert containing spent nuclear fuel are surrounded by bentonite clay and deposited at 400-700 m depth in saturated granitic rock. The facility design comprises rock caverns, tunnels, deposition positions etc. Deposition tunnels are linked by tunnels for transport and communication and shafts for ventilation. One ramp and five shafts connect the surface facility to the underground repository. The ramp is used for heavy and bulky transports and the shafts are for utility systems and for transport of excavated rock, backfill and staff. For the purposes of the safety assessment, the engineered parts of the repository system have been sub-divided into a number of components or sub-systems. These are: The fuel, (also including cavities in the canister since strong interactions between the two occur if the

Fisheries and Oceans Canada climate change risk assessment initiative

Energy Technology Data Exchange (ETDEWEB)

Dalpe, R. [Fisheries and Oceans, Ottawa, ON (Canada)

2005-07-01

This paper provided an overview of an initiative undertaken by the Department of Fisheries and Oceans (DFO) Canada to assess the risks associated with climate change on Canada's waterways and aquatic resources over the next 10 to 20 years. It discussed the risk associated with changes in water temperature and level in increasing the vulnerability of fish stocks and ecosystems. A decrease in water levels is also an issue as it will render current infrastructure ineffective. Storm surges can also have an impact on coastal community infrastructure. The purpose of the assessment was to provide DFO management with a structured understanding of the major climate change factors that pose risks to DFO's operations and to establish priorities in identifying appropriate risk mitigation responses. The presentation discussed the different stages of the initiative (planning, identification and evaluation of risk, validation, and reporting), its' challenges and benefits, as well as lessons learned from this exercises. Lessons learned from the project are as follows: get senior level buy-in from the outset; engage the right people; make it easy for others to be engaged; validate results and risk management response; be ready for surprises; and build in some flexibility to the process. figs.

Performance Objective for Tank Farm Closure Risk Assessments

International Nuclear Information System (INIS)

MANN, F.M.; KNEPP, A.J.; BADDEN, J.

2003-01-01

To be meaningful, results from a numeric risk assessment of the consequences of an action must be compared against the standards for such an action. That is, before one disposes of waste or closes a facility with waste, one must show that the disposal or closure action protects the public health and safety and the environment. These standards are called performance objectives. Regulations requiring performing performance assessments, (whether federal ones like the Department of Energy [DOE] Order 435.1, Radioactive Waste Management and its implementing guides or Washington State ones like the regulations implementing the Washington Administrative Code [WAC] 173-340 ''Model Toxics Control Act - Cleanup''), usually require that the determination of performance objectives be one of the first steps performed. These performance objectives not only set comparison level for the numeric results, but also define the media, pathways, exposure scenarios (receptors), spatial locations, and times that the performance assessment must consider. Thus, a performance objective consists of a compliance level, place(s) of compliance, and time(s) of compliance. Performance objectives are not the levels that a regulatory agency will enforce in a permit or authorization. Those levels, often called enforcement levels, will be set in the permit or authorization. Rather, performance objectives are those levels against which the results of the numeric simulation will be compared to judge the success of the proposed cleanup or disposal actions. Additional comparison levels may be requested for information purposes, but are not officially part of the decision on the adequacy of the proposed action. To emphasize that the performance objectives discussed in this document are not regulatory performance objectives, the three components of the performance objective will be renamed in this document as assessment standard, point(s) of assessment, and time(s) of assessment. However, whenever

Performance assessment - risk assessment vive la differences

International Nuclear Information System (INIS)

Nitschke, R.L.

1997-01-01

In the sister worlds of radioactive waste management disposal and environmental restoration, there are two similar processes and computational approaches for determining the acceptability of the proposed activities. While similar, these two techniques can lead to confusion and misunderstanding if the differences are not recognized and appreciated. In the case of radioactive waste management, the performance assessment process is used to determine compliance with certain prescribed 'performance objectives'. These objectives are designed to ensure that the disposal of radioactive (high-level, low-level, and/or transuranic) waste will be protective of human health and the environment. The environmental link is primarily through assuring protection of the groundwater as a resource. In the case of environmental restoration, the risk assessment process is used to determine the proper remedial action response, if any, for a past hazardous waste release. The process compares the 'no action' or 'leave as is' option with both carcinogenic and noncarcinogenic values for human health to determine the need for any action and to help to help determine just what the appropriate action would need to be. The impacts to the ecological system are evaluated in a slightly, different but similar fashion. Now the common objectives between these two processes notwithstanding. There are some key and fundamental differences that need to be answered that make direct comparisons or a common approach inappropriate. Failure to recognize this can lead to confusion and misunderstanding. This can be particularly problematic when one is faced with an active disposal facility located within the boundaries of an environmental restoration site as is the case at the Idaho National Engineering Laboratory (INEL). Through a critical evaluation of the performance assessment and risk assessment processes, highlighting both similarities and differences, it is hoped that greater understanding and appreciation

Performance objectives for the Hanford Immobilized Low-Activity Waste (ILAW) performance assessment

International Nuclear Information System (INIS)

MANN, F.M.

1999-01-01

Performance objectives for the disposal of low activity waste from Hanford Waste Tanks have been developed. These objectives have been based on DOE requirements, programmatic requirements, and public involvement. The DOE requirements include regulations that direct the performance assessment and are cited within the Radioactive Waste Management Order (DOE Order 435.1). Performance objectives for other DOE complex performance assessments have been included

A reappraisal of some Cigar Lake issues of importance to performance assessment

Energy Technology Data Exchange (ETDEWEB)

Smellie, J. [Conterra AB (Sweden); Karlsson, Fred [Swedish Nucelear Fuel and Waste Management Co., Stockholm (Sweden)

1996-07-01

The AECL/SKB Cigar Lake Analogue Study was published in 1994. Data from this study, relevant for repository performance assessments, have been reappraised in the light of greater exposure to analogue studies and the development of more realistic models used in performance assessment. Several of the areas proved to have been adequately addressed in the original study, but one of the areas that particularly benefited from the renewed analysis concerned radiolysis. In this case a model for radiolysis was developed and tested, significantly narrowing the gap between calculated and predicted oxidant production. Considerable progress was also made in understanding and modelling the initial formation of the deposit under hydrothermal conditions, and using this conceptual model to evaluate the changes that have subsequently occurred under `ambient` repository conditions over geological timescales. Moreover, the physical properties of clay as a potential buffer to groundwater flow and radionuclide migration were addressed with some success. 99 refs.

A reappraisal of some Cigar Lake issues of importance to performance assessment

International Nuclear Information System (INIS)

Smellie, J.; Karlsson, Fred

1996-07-01

The AECL/SKB Cigar Lake Analogue Study was published in 1994. Data from this study, relevant for repository performance assessments, have been reappraised in the light of greater exposure to analogue studies and the development of more realistic models used in performance assessment. Several of the areas proved to have been adequately addressed in the original study, but one of the areas that particularly benefited from the renewed analysis concerned radiolysis. In this case a model for radiolysis was developed and tested, significantly narrowing the gap between calculated and predicted oxidant production. Considerable progress was also made in understanding and modelling the initial formation of the deposit under hydrothermal conditions, and using this conceptual model to evaluate the changes that have subsequently occurred under 'ambient' repository conditions over geological timescales. Moreover, the physical properties of clay as a potential buffer to groundwater flow and radionuclide migration were addressed with some success. 99 refs

SPI Project Criticality Task Force initial review and assessment

International Nuclear Information System (INIS)

McKinley, K.B.; Cannon, J.W.; Marsden, R.S.; Worle, H.A.

1980-03-01

The Slagging Pyrolysis Incinerator (SPI) Facility is being developed to process transuranic waste stored and buried at the Idaho National Engineering Laboratory (INEL) into a chemically inert, physically stable, basalt-like residue acceptable for a Federal Repository. A task force was established by the SPI Project Division to review and assess all aspects of criticality safety for the SPI Facility. This document presents the initial review, evaluations, and recommendations of the task force and includes the following: background information on waste characterization, and criticality control approaches and philosophies, a description of the SPI Facility Waste Processing Building, a review and assessment of potentially relevant codes and regulations; a review and assessment of the present state of criticality and assaying/monitoring studies, and recommendations for changes in and additions to these studies. The review and assessment of potentially relevant codes and regulations indicate that ERDAM 0530, Nuclear Criticality Safety should be the controlling document for criticality safety for the SPI Project. In general, the criticality control approaches and philosophies for the SPI Project comply with this document

77 FR 26315 - U.S. Extractive Industries Transparency Initiative Stakeholder Assessment and Multi-Stakeholder...

Science.gov (United States)

2012-05-03

... DEPARTMENT OF THE INTERIOR [Docket No. ONRR-2012-0003] U.S. Extractive Industries Transparency... assessment as part of the U.S. Extractive Industries Transparency Initiative (USEITI) implementation process...' commitment to participate in the Extractive Industries Transparency Initiative. EITI is a signature...

Performance Assessment Strategy Plan for the Geologic Repository Program

International Nuclear Information System (INIS)

1990-01-01

Performance assessment is a major constituent of the program being conducted by the US Department of Energy (DOE) to develop a geologic repository. Performance assessment is the set of activities needed for quantitative evaluations to assess compliance with the performance requirements in the regulations for a geologic repository and to support the development of the repository. The strategy for these evaluations has been documented in the Performance Assessment Strategy Plan (DOE, 1989). The implementation of the performance assessment strategy is defined in this document. This paper discusses the scope and objectives of the implementation plan, the relationship of the plan to other program plans, summarizes the performance assessment areas and the integrated strategy of the performance assessment program. 1 fig., 3 tabs

Total System Performance Assessment for the Site Recommendation

Energy Technology Data Exchange (ETDEWEB)

None

2000-10-02

Site Recommendation (SR). The Total System Performance Assessment-Site Recommendation (TSPA-SR) will present a compliance evaluation of overall system performance against the guidelines and requirements in the revision of the DOE siting guidelines to be promulgated at 10 CFR 963, U.S. Nuclear Regulatory Commission (NRC) regulation for HLW disposal at proposed 10 CFR 63 (the proposed rule has been published at 64 FR 8640), and U.S. Environmental Protection Agency (EPA) environmental radiation protection standard to be promulgated at 40 CFR 197. At present, the NRC has issued the proposed 10 CFR 63 (64 FR 8640) for public comment whereas the EPA standard and the revised DOE siting guidelines are currently being developed. EPA has announced the release of 40 CFR 197 proposed rule on its website (www.epa.gov/radiation/yucca/rule.qui.htm) and the Federal Register announcement (which initiates the 90 day public comment period) is expected by the end of August, 1999. The purpose of this document is to present the overall goals, objectives, scope, methods, approach, and assumptions to be used in the development of the TSPA-SR. This document will serve as a communication tool for coordinating the DOE TSPA activities and for keeping the NRC staff informed of the TSPA activities for the SR.

Impact of workplace based assessment on doctors' education and performance: a systematic review.

Science.gov (United States)

Miller, Alice; Archer, Julian

2010-09-24

To investigate the literature for evidence that workplace based assessment affects doctors' education and performance. Systematic review. The primary data sources were the databases Journals@Ovid, Medline, Embase, CINAHL, PsycINFO, and ERIC. Evidence based reviews (Bandolier, Cochrane Library, DARE, HTA Database, and NHS EED) were accessed and searched via the Health Information Resources website. Reference lists of relevant studies and bibliographies of review articles were also searched. Review methods Studies of any design that attempted to evaluate either the educational impact of workplace based assessment, or the effect of workplace based assessment on doctors' performance, were included. Studies were excluded if the sampled population was non-medical or the study was performed with medical students. Review articles, commentaries, and letters were also excluded. The final exclusion criterion was the use of simulated patients or models rather than real life clinical encounters. Sixteen studies were included. Fifteen of these were non-comparative descriptive or observational studies; the other was a randomised controlled trial. Study quality was mixed. Eight studies examined multisource feedback with mixed results; most doctors felt that multisource feedback had educational value, although the evidence for practice change was conflicting. Some junior doctors and surgeons displayed little willingness to change in response to multisource feedback, whereas family physicians might be more prepared to initiate change. Performance changes were more likely to occur when feedback was credible and accurate or when coaching was provided to help subjects identify their strengths and weaknesses. Four studies examined the mini-clinical evaluation exercise, one looked at direct observation of procedural skills, and three were concerned with multiple assessment methods: all these studies reported positive results for the educational impact of workplace based assessment tools

Preliminary melter performance assessment report

International Nuclear Information System (INIS)

Elliott, M.L.; Eyler, L.L.; Mahoney, L.A.; Cooper, M.F.; Whitney, L.D.; Shafer, P.J.

1994-08-01

The Melter Performance Assessment activity, a component of the Pacific Northwest Laboratory's (PNL) Vitrification Technology Development (PVTD) effort, was designed to determine the impact of noble metals on the operational life of the reference Hanford Waste Vitrification Plant (HWVP) melter. The melter performance assessment consisted of several activities, including a literature review of all work done with noble metals in glass, gradient furnace testing to study the behavior of noble metals during the melting process, research-scale and engineering-scale melter testing to evaluate effects of noble metals on melter operation, and computer modeling that used the experimental data to predict effects of noble metals on the full-scale melter. Feed used in these tests simulated neutralized current acid waste (NCAW) feed. This report summarizes the results of the melter performance assessment and predicts the lifetime of the HWVP melter. It should be noted that this work was conducted before the recent Tri-Party Agreement changes, so the reference melter referred to here is the Defense Waste Processing Facility (DWPF) melter design

Role of natural analogs in performance assessment of nuclear waste repositories

International Nuclear Information System (INIS)

Sagar, B.; Wittmeyer, G.W.

1995-01-01

Mathematical models of the flow of water and transport of radionuclides in porous media will be used to assess the ability of deep geologic repositories to safely contain nuclear waste. These models must, in some sense, be validated to ensure that they adequately describe the physical processes occurring within the repository and its geologic setting. Inasmuch as the spatial and temporal scales over which these models must be applied in performance assessment are very large, validation of these models against laboratory and small-scale field experiments may be considered inadequate. Natural analogs may provide validation data that are representative of physico-chemical processes that occur over spatial and temporal scales as large or larger than those relevant to repository design. The authors discuss the manner in which natural analog data may be used to increase confidence in performance assessment models and conclude that, while these data may be suitable for testing the basic laws governing flow and transport, there is insufficient control of boundary and initial conditions and forcing functions to permit quantitative validation of complex, spatially distributed flow and transport models. The authors also express their opinion that, for collecting adequate data from natural analogs, resources will have to be devoted to them that are much larger than are devoted to them at present

Energy performance assessment methodology

Energy Technology Data Exchange (ETDEWEB)

Platzer, W.J. [Fraunhofer Inst. for Solar Energy Systems, Freiburg (Germany)

2006-01-15

The energy performance of buildings are intimately connected to the energy performance of building envelopes. The better we understand the relation between the quality of the envelope and the energy consumption of the building, the better we can improve both. We have to consider not only heating but all service energies related to the human comfort in the building, such as cooling, ventilation, lighting as well. The complexity coming from this embracing approach is not to be underestimated. It is less and less possible to realted simple characteristic performance indicators of building envelopes (such as the U-value) to the overall energy performance. On the one hand much more paramters (e.g. light transmittance) come into the picture we have to assess the product quality in a multidimensional world. Secondly buildings more and more have to work on a narrow optimum: For an old, badly insulated building all solar gains are useful for a high-performance building with very good insulation and heat recovery systems in the ventilation overheating becomes more likely. Thus we have to control the solar gains, and sometimes we need high gains, sometimes low ones. And thirdly we see that the technology within the building and the user patterns and interactions as well influence the performance of a building envelope. The aim of this project within IEA Task27 was to improve our knowledge on the complex situation and also to give a principal approach how to assess the performance of the building envelope. The participants have contributed to this aim not pretending that we have reached the end. (au)

Performance of an HF chain-reaction laser with high initiation efficiency

International Nuclear Information System (INIS)

Whittier, J.S.; Kerber, R.L.

1974-01-01

Output-pulse observations are presented for a transverse electrically initiated, helium-diluted HF laser pumped by the H 2 + F 2 chain reaction. Performance of this laser is studied over a wide range of the gas composition and for initial pressures between 0.1 and 0.5 atm. The gas mixture was stabilized by premixing O 2 , F 2 , and He and flowing this mixture into a cold trap (84 0 K) before mixing with H 2 . Optimum conversion of electrical-initiation energy into laser energy was found for a 240-torr mixture with a mole ratio 1 F 2 :0.23 H 2 :0.08 O 2 :12 He which, when initiated with a 25-kV, 333-pF discharge, gave a pulse energy of 0.150 J. This corresponds to a ratio of laser output energy to electrical input energy of 144 percent. After unnecessary losses are taken into account, this ratio becomes 160 percent. (U.S.)

Determination of Safety Performance Grade of NPP Using Integrated Safety Performance Assessment (ISPA) Program

International Nuclear Information System (INIS)

Chung, Dae Wook

2011-01-01

Since the beginning of 2000, the safety regulation of nuclear power plant (NPP) has been challenged to be conducted more reasonable, effective and efficient way using risk and performance information. In the United States, USNRC established Reactor Oversight Process (ROP) in 2000 for improving the effectiveness of safety regulation of operating NPPs. The main idea of ROP is to classify the NPPs into 5 categories based on the results of safety performance assessment and to conduct graded regulatory programs according to categorization, which might be interpreted as 'Graded Regulation'. However, the classification of safety performance categories is highly comprehensive and sensitive process so that safety performance assessment program should be prepared in integrated, objective and quantitative manner. Furthermore, the results of assessment should characterize and categorize the actual level of safety performance of specific NPP, integrating all the substantial elements for assessing the safety performance. In consideration of particular regulatory environment in Korea, the integrated safety performance assessment (ISPA) program is being under development for the use in the determination of safety performance grade (SPG) of a NPP. The ISPA program consists of 6 individual assessment programs (4 quantitative and 2 qualitative) which cover the overall safety performance of NPP. Some of the assessment programs which are already implemented are used directly or modified for incorporating risk aspects. The others which are not existing regulatory programs are newly developed. Eventually, all the assessment results from individual assessment programs are produced and integrated to determine the safety performance grade of a specific NPP

Subjective and objective performance assessment : Performance pay at Trelleborg Forsheda AB

OpenAIRE

Luotonen, David; Hasselström, Markus

2009-01-01

  The purpose of this thesis is to understand the opinions and potential effects of objective and subjective assessments of performance as a basis for performance pay for blue-collar workers. The study takes a qualitative approach to find out how and why four companies - Trelleborg Forsheda, Finnveden Powertrain, Isaberg Rapid and Parker Hannifin- work with salaries, incentive system and performance assessment the way they do. The concept of individual salary is central in this thesis, and in...

Gamma camera performance: technical assessment protocol

International Nuclear Information System (INIS)

Bolster, A.A.; Waddington, W.A.

1996-01-01

This protocol addresses the performance assessment of single and dual headed gamma cameras. No attempt is made to assess the performance of any associated computing systems. Evaluations are usually performed on a gamma camera commercially available within the United Kingdom and recently installed at a clinical site. In consultation with the manufacturer, GCAT selects the site and liaises with local staff to arrange a mutually convenient time for assessment. The manufacturer is encouraged to have a representative present during the evaluation. Three to four days are typically required for the evaluation team to perform the necessary measurements. When access time is limited, the team will modify the protocol to test the camera as thoroughly as possible. Data are acquired on the camera's computer system and are subsequently transferred to the independent GCAT computer system for analysis. This transfer from site computer to the independent system is effected via a hardware interface and Interfile data transfer. (author)

Gamma camera performance: technical assessment protocol

Energy Technology Data Exchange (ETDEWEB)

Bolster, A.A. [West Glasgow Hospitals NHS Trust, London (United Kingdom). Dept. of Clinical Physics; Waddington, W.A. [University College London Hospitals NHS Trust, London (United Kingdom). Inst. of Nuclear Medicine

1996-12-31

This protocol addresses the performance assessment of single and dual headed gamma cameras. No attempt is made to assess the performance of any associated computing systems. Evaluations are usually performed on a gamma camera commercially available within the United Kingdom and recently installed at a clinical site. In consultation with the manufacturer, GCAT selects the site and liaises with local staff to arrange a mutually convenient time for assessment. The manufacturer is encouraged to have a representative present during the evaluation. Three to four days are typically required for the evaluation team to perform the necessary measurements. When access time is limited, the team will modify the protocol to test the camera as thoroughly as possible. Data are acquired on the camera`s computer system and are subsequently transferred to the independent GCAT computer system for analysis. This transfer from site computer to the independent system is effected via a hardware interface and Interfile data transfer. (author).

Real-Time Assessment and Diagnosis of Process Operating Performance

Directory of Open Access Journals (Sweden)

Shabnam Sedghi

2017-04-01

Full Text Available Over time, the performance of processes may deviate from the initial design due to process variations and uncertainties, making it necessary to develop systematic methods for online optimality assessment based on routine operating process data. Some processes have multiple operating modes caused by the set point change of the critical process variables to achieve different product specifications. On the other hand, the operating region in each operating mode can alter, due to uncertainties. In this paper, we will establish an optimality assessment framework for processes that typically have multi-mode, multi-region operations, as well as transitions between different modes. The kernel density approach for mode detection is adopted and improved for operating mode detection. For online mode detection, the model-based clustering discriminant analysis (MclustDA approach is incorporated with some a priori knowledge of the system. In addition, multi-modal behavior of steady-state modes is tackled utilizing the mixture probabilistic principal component regression (MPPCR method, and dynamic principal component regression (DPCR is used to investigate transitions between different modes. Moreover, a probabilistic causality detection method based on the sequential forward floating search (SFFS method is introduced for diagnosing poor or non-optimum behavior. Finally, the proposed method is tested on the Tennessee Eastman (TE benchmark simulation process in order to evaluate its performance.

Practical session assessments in human anatomy: Weightings and performance.

Science.gov (United States)

McDonald, Aaron C; Chan, Siew-Pang; Schuijers, Johannes A

2016-07-08

Assessment weighting within a given module can be a motivating factor for students when deciding on their commitment level and time given to study a specific topic. In this study, an analysis of assessment performances of second year anatomy students was performed over four years to determine if (1) students performed better when a higher weighting was given to a set of practical session assessments and (2) whether an improved performance in the practical session assessments had a carry-over effect on other assessment tasks within that anatomy module and/or other anatomy modules that follow. Results showed that increasing the weighting of practical session assessments improved the average mark in that assessment and also improved the percentage of students passing that assessment. Further, it significantly improved performance in the written end-semester examination within the same module and had a carry-over effect on the anatomy module taught in the next teaching period, as students performed better in subsequent practical session assessments as well as subsequent end-semester examinations. It was concluded that the weighting of assessments had significant influences on a student's performance in that, and subsequent, assessments. It is postulated that practical session assessments, designed to develop deep learning skills in anatomy, improved efficacy in student performance in assessments undertaken in that and subsequent anatomy modules when the weighting of these assessments was greater. These deep learning skills were also transferable to other methods of assessing anatomy. Anat Sci Educ 9: 330-336. © 2015 American Association of Anatomists. © 2015 American Association of Anatomists.

Integrated probabilistic assessment for DHC initiation, growth and leak-before-break of PHWR pressure tubes

Energy Technology Data Exchange (ETDEWEB)

Oh, Young-Jin [Power Engineering Research Institute, KEPCO Engineering and Construction, 188 Gumi-dong, Bundang-gu, Seongnam-si, Gyeonggi-do 463-870 (Korea, Republic of); Chang, Yoon-Suk, E-mail: yschang@khu.ac.kr [Department of Nuclear Engineering, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do 446-701 (Korea, Republic of)

2014-08-15

Highlights: • We develop an integrated approach for probabilistic assessment of PHWR pressure tube. • We examine probabilities of DHC initiation, growth, penetration and LBB failure. • The proposed approach is helpful to calculate rupture probabilities in reactor flaws even in the case of very low rupture probability. - Abstract: A few hundred zirconium alloy pressure tubes in a pressurized heavy water reactor (PHWR) serve as the nuclear fuel channel, as well as the reactor coolant pressure boundary. The pressure tubes are inspected periodically and a fitness-for-service assessment (FFSA) must be conducted if any flaw is detected in the inspection. A Canadian standard provides FFSA procedures of PHWR pressure tubes, which include probabilistic assessment for flaws considering delayed hydride cracking (DHC) and leak-before-break (LBB). In the present study, an integrated approach with detailed stepwise calculation procedures and integration methodology for probabilistic assessment of pressure tube was developed. In the first step of this approach, a probability of the DHC initiation, growth and penetration for single initial flaw is calculated. In the next step, a probability of LBB failure, which means tube rupture, for single through-wall crack (TWC) is calculated. Finally, a rupture probability for all initial flaws in a reactor can be calculated using the penetration probability for single flaw and the LBB failure probability for single TWC, as well as the predicted total number of initial flaw in the reactor.

Integrated probabilistic assessment for DHC initiation, growth and leak-before-break of PHWR pressure tubes

International Nuclear Information System (INIS)

Oh, Young-Jin; Chang, Yoon-Suk

2014-01-01

Highlights: • We develop an integrated approach for probabilistic assessment of PHWR pressure tube. • We examine probabilities of DHC initiation, growth, penetration and LBB failure. • The proposed approach is helpful to calculate rupture probabilities in reactor flaws even in the case of very low rupture probability. - Abstract: A few hundred zirconium alloy pressure tubes in a pressurized heavy water reactor (PHWR) serve as the nuclear fuel channel, as well as the reactor coolant pressure boundary. The pressure tubes are inspected periodically and a fitness-for-service assessment (FFSA) must be conducted if any flaw is detected in the inspection. A Canadian standard provides FFSA procedures of PHWR pressure tubes, which include probabilistic assessment for flaws considering delayed hydride cracking (DHC) and leak-before-break (LBB). In the present study, an integrated approach with detailed stepwise calculation procedures and integration methodology for probabilistic assessment of pressure tube was developed. In the first step of this approach, a probability of the DHC initiation, growth and penetration for single initial flaw is calculated. In the next step, a probability of LBB failure, which means tube rupture, for single through-wall crack (TWC) is calculated. Finally, a rupture probability for all initial flaws in a reactor can be calculated using the penetration probability for single flaw and the LBB failure probability for single TWC, as well as the predicted total number of initial flaw in the reactor

Objective techniques for psychological assessment, phase 2. [techniques for measuring human performance during space flight stress

Science.gov (United States)

Wortz, E. C.; Saur, A. J.; Nowlis, D. P.; Kendall, M. P.

1974-01-01

Results are presented of an initial experiment in a research program designed to develop objective techniques for psychological assessment of individuals and groups participating in long-duration space flights. Specifically examined is the rationale for utilizing measures of attention as an objective assessment technique. Subjects participating in the experiment performed various tasks (eg, playing matrix games which appeared on a display screen along with auditory stimuli). The psychophysiological reactions of the subjects were measured and are given. Previous research of various performance and psychophysiological methods of measuring attention is also discussed. The experiment design (independent and dependent variables) and apparatus (computers and display devices) are described and shown. Conclusions and recommendations are presented.

Enabling performance skills: Assessment in engineering education

Science.gov (United States)

Ferrone, Jenny Kristina

Current reform in engineering education is part of a national trend emphasizing student learning as well as accountability in instruction. Assessing student performance to demonstrate accountability has become a necessity in academia. In newly adopted criterion proposed by the Accreditation Board for Engineering and Technology (ABET), undergraduates are expected to demonstrate proficiency in outcomes considered essential for graduating engineers. The case study was designed as a formative evaluation of freshman engineering students to assess the perceived effectiveness of performance skills in a design laboratory environment. The mixed methodology used both quantitative and qualitative approaches to assess students' performance skills and congruency among the respondents, based on individual, team, and faculty perceptions of team effectiveness in three ABET areas: Communications Skills. Design Skills, and Teamwork. The findings of the research were used to address future use of the assessment tool and process. The results of the study found statistically significant differences in perceptions of Teamwork Skills (p performance skills, such as teamwork, among freshman engineering students; (2) incorporate feedback into the learning process; (3) strengthen the assessment process with a follow-up plan that specifically targets performance skill deficiencies, and (4) integrate the assessment instrument and practice with ongoing curriculum development. The findings generated by this study provides engineering departments engaged in assessment activity, opportunity to reflect, refine, and develop their programs as it continues. It also extends research on ABET competencies of engineering students in an under-investigated topic of factors correlated with team processes, behavior, and student learning.

Assessing Vocal Performances Using Analytical Assessment: A Case Study

Science.gov (United States)

Gynnild, Vidar

2016-01-01

This study investigated ways to improve the appraisal of vocal performances within a national academy of music. Since a criterion-based assessment framework had already been adopted, the conceptual foundation of an assessment rubric was used as a guide in an action research project. The group of teachers involved wanted to explore thinking…

Novel prescribed performance neural control of a flexible air-breathing hypersonic vehicle with unknown initial errors.

Science.gov (United States)

Bu, Xiangwei; Wu, Xiaoyan; Zhu, Fujing; Huang, Jiaqi; Ma, Zhen; Zhang, Rui

2015-11-01

A novel prescribed performance neural controller with unknown initial errors is addressed for the longitudinal dynamic model of a flexible air-breathing hypersonic vehicle (FAHV) subject to parametric uncertainties. Different from traditional prescribed performance control (PPC) requiring that the initial errors have to be known accurately, this paper investigates the tracking control without accurate initial errors via exploiting a new performance function. A combined neural back-stepping and minimal learning parameter (MLP) technology is employed for exploring a prescribed performance controller that provides robust tracking of velocity and altitude reference trajectories. The highlight is that the transient performance of velocity and altitude tracking errors is satisfactory and the computational load of neural approximation is low. Finally, numerical simulation results from a nonlinear FAHV model demonstrate the efficacy of the proposed strategy. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Performance Assessment as a Diagnostic Tool for Science Teachers

Science.gov (United States)

Kruit, Patricia; Oostdam, Ron; van den Berg, Ed; Schuitema, Jaap

2018-04-01

Information on students' development of science skills is essential for teachers to evaluate and improve their own education, as well as to provide adequate support and feedback to the learning process of individual students. The present study explores and discusses the use of performance assessments as a diagnostic tool for formative assessment to inform teachers and guide instruction of science skills in primary education. Three performance assessments were administered to more than 400 students in grades 5 and 6 of primary education. Students performed small experiments using real materials while following the different steps of the empirical cycle. The mutual relationship between the three performance assessments is examined to provide evidence for the value of performance assessments as useful tools for formative evaluation. Differences in response patterns are discussed, and the diagnostic value of performance assessments is illustrated with examples of individual student performances. Findings show that the performance assessments were difficult for grades 5 and 6 students but that much individual variation exists regarding the different steps of the empirical cycle. Evaluation of scores as well as a more substantive analysis of students' responses provided insight into typical errors that students make. It is concluded that performance assessments can be used as a diagnostic tool for monitoring students' skill performance as well as to support teachers in evaluating and improving their science lessons.

VISUAL ART TEACHERS AND PERFORMANCE ASSESSMENT ...

African Journals Online (AJOL)

Charles

qualitative research design; an aspect of descriptive survey research aiming at ... the competence and use of assessment strategies is determined by the type of ... Visual Art Teachers and Performance Assessment Methods in Nigerian Senior ...

The assessment of creep-fatigue initiation and crack growth

International Nuclear Information System (INIS)

Priest, R.H.; Miller, D.A.

1991-01-01

An outline of Nuclear Electric's Assessment Procedure for the High Temperature Response of Structures ('R5') for creep-fatigue initiation and crack growth is given. A unified approach is adopted for both regimes. For initiation, total damage is described in terms of separate creep and fatigue components. Ductility exhaustion is used for estimating creep damage whilst continuous cycling endurance data are used to evaluate the fatigue damage term. Evidence supporting this approach is given through the successful prediction of creep-fatigue endurances for a range of materials, cycle types, dwell period times, etc. Creep-fatigue crack growth is similarly described in terms of separated creep and fatigue components. Crack growth rates for each component are characterised in terms of fracture mechanics parameters. It is shown that creep crack growth rates can be rationalised on a ductility basis. Creep-fatigue interactions are accommodated in the cyclic growth component through the use of materials coefficients which depend on dwell time. (orig.)

Performance assessment strategy for low-level waste disposal sites

International Nuclear Information System (INIS)

Starmer, R.J.; Deering, L.G.; Weber, M.F.

1988-01-01

This paper describes US Nuclear Regulatory Commission (NRC) staff views on predicting the performance of low-level radioactive waste disposal facilities. Under the Atomic Energy Act, as amended, and the Low Level Radioactive Waste Policy Act, as amended, the NRC and Agreement States license land disposal of low-level radioactive waste (LLW) using the requirements in 10 CFR Part 61 or comparable state requirements. The purpose of this paper is to briefly describe regulatory requirements for performance assessment in low-level waste licensing, a strategy for performance assessments to support license applications, and NRC staff licensing evaluation of performance assessments. NRC's current activities in developing a performance assessment methodology will provide an overall systems modeling approach for assessing the performance of LLW disposal facilities. NRC staff will use the methodology to evaluate performance assessments conducted by applicants for LLW disposal facilities. The methodology will be made available to states and other interested parties

Effect of a Neonatal Resuscitation Course on Healthcare Providers' Performances Assessed by Video Recording in a Low-Resource Setting.

Science.gov (United States)

Trevisanuto, Daniele; Bertuola, Federica; Lanzoni, Paolo; Cavallin, Francesco; Matediana, Eduardo; Manzungu, Olivier Wingi; Gomez, Ermelinda; Da Dalt, Liviana; Putoto, Giovanni

2015-01-01

We assessed the effect of an adapted neonatal resuscitation program (NRP) course on healthcare providers' performances in a low-resource setting through the use of video recording. A video recorder, mounted to the radiant warmers in the delivery rooms at Beira Central Hospital, Mozambique, was used to record all resuscitations. One-hundred resuscitations (50 before and 50 after participation in an adapted NRP course) were collected and assessed based on a previously published score. All 100 neonates received initial steps; from these, 77 and 32 needed bag-mask ventilation (BMV) and chest compressions (CC), respectively. There was a significant improvement in resuscitation scores in all levels of resuscitation from before to after the course: for "initial steps", the score increased from 33% (IQR 28-39) to 44% (IQR 39-56), pproviders improved after participation in an adapted NRP course. Video recording was well-accepted by the staff, useful for objective assessment of performance during resuscitation, and can be used as an educational tool in a low-resource setting.

An overview of performance assessment methodology

International Nuclear Information System (INIS)

Hongnian Jow

2010-01-01

The definition of performance assessment (PA) within the context of a geologic repository program is a post-closure safety assessment; a system analysis of hazards associated with the facility and the ability of the site and the design of the facility to provide for the safety functions. For the last few decades, PA methodology bas been developed and applied to different waste disposal programs around the world. PA has been used in the safety analyses for waste disposal repositories for low-level waste, intermediate level waste, and high-level waste including spent nuclear fuels. This paper provides an overview of the performance assessment methodology and gives examples of its applications for the Yucca Mountain Project. (authors)

B-physics performance with Initial and Complete Inner detector layouts in Data Challenge-1

CERN Document Server

Benekos, N C; Bouhova-Thacker, E; Epp, B; Ghete, V M; Jones, R; Kartvelishvili, V G; Lagouri, T; Laporte, J F; Nairz, A; Nikitine, N; Reznicek, P; Sivoklokov, S Yu; Smizanska, M; Testa, M; Toms, K

2004-01-01

The B-physics performance for the Initial and the Complete Inner Detector layouts is presented. Selected types of B-physics events were simulated, reconstructed and analyzed using the software tools of ATLAS Data Challenge-1 (DC1). The results were compared to those obtained with an older ATLAS detector design the so-called TDR layout. Within the limitations of the DC1 software tools an attempt was made to evaluate the performance loss due to missing detector parts in the Initial layout in comparison with the Complete detector.

Performance success from self-assessments

International Nuclear Information System (INIS)

Hughes, G.

1996-01-01

This paper provides information on and successes of self-assessments completed at the Callaway plant. It stresses the vital needs and substantial benefits from these continual self-improvement efforts. The Callaway plant staff use a variety of methods and techniques to do self-assessments with the focus on performance outcomes. Self-assessments help Callaway focus on the priority issues and direct resources properly. Callaway's success has been due to this learning culture. The Callaway plant is a Westinghouse four-loop plant in the state of Missouri and has been operational since 1984

40 CFR 63.7940 - By what date must I conduct performance tests or other initial compliance demonstrations?

Science.gov (United States)

2010-07-01

... compliance is not demonstrated using a performance test or design evaluation, you must demonstrate initial... performance tests or other initial compliance demonstrations? 63.7940 Section 63.7940 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS...

Performance assessment handbook for low-level radioactive waste disposal facilities

International Nuclear Information System (INIS)

Seitz, R.R.; Garcia, R.S.; Kostelnik, K.M.; Starmer, R.J.

1992-02-01

Performance assessments of proposed low-level radioactive waste disposal facilities must be conducted to support licensing. This handbook provides a reference document that can be used as a resource by management and staff responsible for performance assessments. Brief discussions describe the performance assessment process and emphasize selected critical aspects of the process. References are also provided for additional information on many aspects of the performance assessment process. The user's manual for the National Low-Level Waste Management Program's Performance Assessment Center (PAC) on the Idaho National Engineering Laboratory Cray computer is included as Appendix A. The PAC provides users an opportunity to experiment with a number of performance assessment computer codes on a Cray computer. Appendix B describes input data required for 22 performance assessment codes

Final Environmental Assessment for the Military Family Housing Privatization Initiative

Science.gov (United States)

2006-09-01

Year 2005 through 2009: VOCE = .016 * Trips NOxE = .015 * Trips PM10E = .0022 * Trips COE = .262 * Trips Appendix A Additional Materials Final...Environmental Assessment Page A-39 Military Family Housing Privatization Initiative Robins Air Force Base, Georgia Year 2010 and beyond: VOCE ...yr) = VOCE * DPYII/2000 NOx (tons/yr) = NOxE * DPYII/2000 PM10 (tons/yr) = PM10E * DPYII/2000 CO (tons/yr) = COE * DPYII/2000 Where: Area of

The performance of the ATLAS initial detector layout for B-physics channels

International Nuclear Information System (INIS)

Epp, B.; Ghete, V.M.; Kuhn, D.; Zhang, Y.J.

2004-01-01

At the start-up of LHC one expects parts of the ATLAS detector to be missing. This layout is called initial layout, whereas the fully staged detector is called complete layout. B-physics channels were simulated, reconstructed and analyzed using the software tools of ATLAS data challenge-1 (DC1). The performance of the detector with respect to quantities relevant to the analysis of the B s → D s π channel and the validation of the full chain generation-simulation-reconstruction-analysis were evaluated for the initial and complete layout. (author)

Initial Technology Assessment for the Large UV-Optical-Infrared (LUVOIR) Mission Concept Study

Science.gov (United States)

Bolcar, Matthew R.; Feinberg, Lee D.; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

2016-01-01

The NASA Astrophysics Divisions 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet-optical-infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for bio-signatures via direct-imaging and spectroscopic characterization of habitable exo-planets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV-Optical Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

Quality Improvement Initiative on Pain Knowledge, Assessment, and Documentation Skills of Pediatric Nurses.

Science.gov (United States)

Margonary, Heather; Hannan, Margaret S; Schlenk, Elizabeth A

2017-01-01

Pain treatment begins with a nurse’s assessment, which relies on effective assessment skills. Hospital settings have implemented pain assessment education, but there is limited evidence in pediatric transitional care settings. The purpose of this quality improvement (QI) initiative was to develop, implement, and evaluate an evidence-based pain education session with 20 nurses in a pediatric specialty hospital that provides transitional care. Specific aims were to assess nurses’ knowledge and attitudes of pain, and evaluate assessment skills based on nurses’ documentation. A prospective pre-post design with three assessments (baseline, post-intervention, and one-month follow-up) was used. The Shriner’s Pediatric Nurses’ Knowledge and Attitudes Regarding Pain questionnaire and an electronic health record review were completed at each assessment. There was significant improvement in nurses’ knowledge and attitudes of pain after the education session (F[2,6] = 50.281, p nurses significantly increased from 43.1% at baseline to 64.8% at post-intervention, and 67.7% at follow-up (χ²[2] = 20.55, p Nursing interventions for pain increased significantly, from 33.3% at baseline to 84.0% at post-intervention, and stabilized at 80.0% at follow-up (χ²[2] = 8.91, p = 0.012). Frequency of pain reassessments did not show a statistically significant change, decreasing from 77.8% at baseline to 44.0% at post-intervention and 40.0% at follow-up (χ²[2]= 3.538, p = 0.171). Nurses’ pain knowledge and documentation of assessment skills were improved in this QI initiative.

Policy and Validity Prospects for Performance-Based Assessment.

Science.gov (United States)

Baker, Eva L.; And Others

1994-01-01

This article describes performance-based assessment as expounded by its proponents, comments on these conceptions, reviews evidence regarding the technical quality of performance-based assessment, and considers its validity under various policy options. (JDD)

Performance analysis of the IEEE 802.16e power management for the initiations of awakening

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

To increase battery life in IEEE 802.16e systems, it is essential to efficiently manage energy in mobile stations. The sleep-mode operation in power management helps to increase the life of a station by saving energy consumption. In power management, there are two important performance metrics: energy consumption and the response delay of awakening medium access control (MAC) service data unit (SDU). While in a base station (BS) initiation of awakening, the two performance metrics should be simultaneously considered, in a mobile subscriber station (MSS) initiation of awakening, the response delay is not considered because it is self-operational. There performance metrics are affected by the minimum sleep interval (Tmin), the maximum sleep interval (Tmax), and the average interarrival time of awakening MAC SDUs (TI) during sleep-mode operation. Therefore, it is imperative to evaluate the two initiations of awakening depending on TI. To reach a fuller understanding of the performance, this paper shows an analytical mode and simulations results for the standard sleep-mode operation in the IEEE 802.16e MAC.

Organic migration forms of radionuclides and performance assessment

International Nuclear Information System (INIS)

Xu Gouqing

2010-01-01

Much attention is paid to inorganic migration forms of radionuclides in groundwater during performance assessment before and organic migration forms, are seldom noted. Therefore some question may come into confidence level in performance assessment. This paper mainly discusses the distribution of organic substances in groundwater and their potential effect on performance assessment. The results obtained in recent years show that clay rocks are generally impermeable to water, but in some cases the interstitial water may be observed in them and the concentration of DOC, HA and FA is rather higher than that in granitic groundwater. The concentration of DOC is relatively low in granitic groundwater, but up to now the effect of organic migration forms of radionuclides in granitic groundwater on performance assessment is not finally determined, it is necessary to make further investigations. (authors)

Computerized tomography(CT) in patients with head injuries, assessment of outcome based upon initial clinical findings and initial CT scans

International Nuclear Information System (INIS)

Espersen, J.O.; Petersen, O.F.

1982-01-01

In this study, which comprises 144 consecutive head injuries, the initial clinical assessment and the findings of the initial CT scan are relatd to the outcome. The mortality is related to the patient's level of consiousness and pupillary light reflex on admission. The disability rate (= number of disabled/number of survivors) was independent of the level of consiousness but closely related to pupillary light reaction. Diminished and obliterated basal cisterns were bad prognostic signs, with a mortality rate of 66% in the latter group. Both disability and mortality increase with the number of different lesion types. (Author)

The use of Leeds Test Objects in the assessment of the performance of radiological imaging systems: an introduction

International Nuclear Information System (INIS)

Cowen, A.R.

1986-01-01

Over the preceding decade the Leeds Radiological Imaging Group have developed a range of test objects with which to assess the performance of radiological imaging systems. The types of imaging equipment which can be assessed include X-ray image intensifier television systems, small-format 100mm/105mm fluorography systems and radiographic screen-film combinations. We have recently extended our interest to the evaluation of digital radiological imaging equipment including digital subtraction fluorography and digital (greyscale) radiographic imaging systems. These test objects were initially developed for the purpose of evaluating imaging performance under laboratory conditions but they have also proved useful under field (clinical) conditions. (author)

Selection of important initiating events for Level 1 probabilistic safety assessment study at Puspati TRIGA Reactor

International Nuclear Information System (INIS)

Maskin, M.; Charlie, F.; Hassan, A.; Prak Tom, P.; Ramli, Z.; Mohamed, F.

2016-01-01

Highlights: • Identifying possible important initiating events (IEs) for Level 1 probabilistic safety assessment performed on research nuclear reactor. • Methods in screening and grouping IEs are addressed. • Focusing only on internal IEs due to random failures of components. - Abstract: This paper attempts to present the results in identifying possible important initiating events (IEs) as comprehensive as possible to be applied in the development of Level-1 probabilistic safety assessment (PSA) study. This involves the approaches in listing and the methods in screening and grouping IEs, by focusing only on the internal IEs due to random failures of components and human errors with full power operational conditions and reactor core as the radioactivity source. Five approaches were applied in listing the IEs and each step of the methodology was described and commented. The criteria in screening and grouping the IEs were also presented. The results provided the information on how the Malaysian PSA team applied the approaches in selecting the most probable IEs as complete as possible in order to ensure the set of IEs was identified systematically and as representative as possible, hence providing confidence to the completeness of the PSA study. This study is perhaps one of the first to address classic comprehensive steps in identifying important IEs to be used in a Level-1 PSA study.

Personality, Assessment Methods and Academic Performance

Science.gov (United States)

Furnham, Adrian; Nuygards, Sarah; Chamorro-Premuzic, Tomas

2013-01-01

This study examines the relationship between personality and two different academic performance (AP) assessment methods, namely exams and coursework. It aimed to examine whether the relationship between traits and AP was consistent across self-reported versus documented exam results, two different assessment techniques and across different…

Governing climate change transnationally: assessing the evidence from a database of sixty initiatives

OpenAIRE

Harriet Bulkeley; Liliana Andonova; Karin Bäckstrand; Michele Betsill; Daniel Compagnon; Rosaleen Duffy; Ans Kolk; Matthew Hoffmann; David Levy; Peter Newell; Tori Milledge; Matthew Paterson; Philipp Pattberg; Stacy VanDeveer

2012-01-01

With this paper we present an analysis of sixty transnational governance initiatives and assess the implications for our understanding of the roles of public and private actors, the legitimacy of governance ‘beyond’ the state, and the North–South dimensions of governing climate change. In the first part of the paper we examine the notion of transnational governance and its applicability in the climate change arena, reflecting on the history and emergence of transnational governance initiative...

Dehydration: physiology, assessment, and performance effects.

Science.gov (United States)

Cheuvront, Samuel N; Kenefick, Robert W

2014-01-01

This article provides a comprehensive review of dehydration assessment and presents a unique evaluation of the dehydration and performance literature. The importance of osmolality and volume are emphasized when discussing the physiology, assessment, and performance effects of dehydration. The underappreciated physiologic distinction between a loss of hypo-osmotic body water (intracellular dehydration) and an iso-osmotic loss of body water (extracellular dehydration) is presented and argued as the single most essential aspect of dehydration assessment. The importance of diagnostic and biological variation analyses to dehydration assessment methods is reviewed and their use in gauging the true potential of any dehydration assessment method highlighted. The necessity for establishing proper baselines is discussed, as is the magnitude of dehydration required to elicit reliable and detectable osmotic or volume-mediated compensatory physiologic responses. The discussion of physiologic responses further helps inform and explain our analysis of the literature suggesting a ≥ 2% dehydration threshold for impaired endurance exercise performance mediated by volume loss. In contrast, no clear threshold or plausible mechanism(s) support the marginal, but potentially important, impairment in strength, and power observed with dehydration. Similarly, the potential for dehydration to impair cognition appears small and related primarily to distraction or discomfort. The impact of dehydration on any particular sport skill or task is therefore likely dependent upon the makeup of the task itself (e.g., endurance, strength, cognitive, and motor skill). © 2014 American Physiological Society.

Performing the lockout/tagout risk assessment.

Science.gov (United States)

Wallace, W Jon

2007-03-01

Lockout/tagout provides the greatest level routine, repetitive, and integral to the production process, a risk assessment should be performed. If the task performed poses an unacceptable risk, acceptable risk reduction methods should be implemented to reduce the risk to acceptable levels.

Can smoking initiation contexts predict how adult Aboriginal smokers assess their smoking risks? A cross-sectional study using the ‘Smoking Risk Assessment Target’

Science.gov (United States)

Gould, Gillian Sandra; Watt, Kerrianne; West, Robert; Cadet-James, Yvonne; Clough, Alan R

2016-01-01

Objectives Smoking prevalence is slow to reduce among Indigenous Australians of reproductive age. We analysed the relationships between age of smoking initiation, recalled initiation influences and self-assessment of smoking risks in Aboriginal smokers. Design, setting and participants A community-based cross-sectional survey of Aboriginal smokers aged 18–45 years (N=121; 58 men) was undertaken, using single-item measures. The Smoking Risk Assessment Target (SRAT) as the primary outcome measure enabled self-assessment of smoking risks from 12 options, recategorised into 3 groups. Participants recalled influences on their smoking initiation. Multinomial logistic regression modelling included age, gender, strength of urges to smoke, age at initiation (regular uptake) and statistically significant initiation influences on χ2 tests (‘to be cool’, alcohol and cannabis). Results Frequent initiation influences included friends (74%; SD 0.44), family (57%; SD 0.5) and alcohol (40%; SD 0.49). 54% (n=65) of smokers had the highest risk perception on the SRAT, selected by those who cared about the smoking risks and intended to quit soon. On multivariate analyses, compared with the highest level of SRAT, male gender, lower age of uptake and strong urges to smoke were significantly associated with the lowest level of SRAT, selected by those who refuted risks or thought they could not quit. Lower age of uptake and alcohol were associated with mid-level of SRAT, selected by those who cared about smoking risks, but did not consider quitting as a priority. Conclusions Characteristics of smoking initiation in youth may have far-reaching associations with how smoking risks are assessed by adults of reproductive age, and their intentions to quit smoking. Becoming a regular smoker at under the age of 16 years, and influences of alcohol on smoking uptake, were inversely associated with high-level assessment of smoking risks and intention to quit in regional Aboriginal smokers

An Assessment of Current Policy Initiatives in Zambia's Cotton Sector

OpenAIRE

Zulu, Ballard; Tschirley, David L.

2004-01-01

This paper assesses three of these policy initiatives: input credit provision for smallholder producers of selected cash crops including cotton, the proposed creation of a Cotton Board, and the emergence in 2003 of District Council levies as a point of conflict between local governments and cotton companies. The purpose of the paper is to provide guidance to public and private decision makers regarding key modifications which may need to be made to these policies to ensure continued healthy d...

Assessing Performance of Botswana’s Public Hospital System: The Use of the World Health Organization Health System Performance Assessment Framework

Directory of Open Access Journals (Sweden)

Onalenna Seitio-Kgokgwe

2014-09-01

Full Text Available Background Very few studies have assessed performance of Botswana public hospitals. We draw from a large research study assessing performance of the Botswana Ministry of Health (MoH to evaluate the performance of public hospital system using the World Health Organization Health Systems Performance Assessment Framework (WHO HSPAF. We aimed to evaluate performance of Botswana public hospital system; relate findings of the assessment to the potential for improvements in hospital performance; and determine the usefulness of the WHO HSPAF in assessing performance of hospital systems in a developing country. Methods This article is based on data collected from document analysis, 54 key informants comprising senior managers and staff of the MoH (N= 40 and senior officers from stakeholder organizations (N= 14, and surveys of 42 hospital managers and 389 health workers. Data from documents and transcripts were analyzed using content and thematic analysis while data analysis for surveys was descriptive determining proportions and percentages. Results The organizational structure of the Botswana’s public hospital system, authority and decision-making are highly centralized. Overall physical access to health services is high. However, challenges in the distribution of facilities and inpatient beds create inequities and inefficiencies. Capacity of the hospitals to deliver services is limited by inadequate resources. There are significant challenges with the quality of care. Conclusion While Botswana invested considerably in building hospitals around the country resulting in high physical access to services, the organization and governance of the hospital system, and inadequate resources limit service delivery. The ongoing efforts to decentralize management of hospitals to district level entities should be expedited. The WHO HSPAF enabled us to conduct a comprehensive assessment of the public hospital system. Though relatively new, this approach proved

Initial rheological description of high performance concretes

Directory of Open Access Journals (Sweden)

Alessandra Lorenzetti de Castro

2006-12-01

Full Text Available Concrete is defined as a composite material and, in rheological terms, it can be understood as a concentrated suspension of solid particles (aggregates in a viscous liquid (cement paste. On a macroscopic scale, concrete flows as a liquid. It is known that the rheological behavior of the concrete is close to that of a Bingham fluid and two rheological parameters regarding its description are needed: yield stress and plastic viscosity. The aim of this paper is to present the initial rheological description of high performance concretes using the modified slump test. According to the results, an increase of yield stress was observed over time, while a slight variation in plastic viscosity was noticed. The incorporation of silica fume showed changes in the rheological properties of fresh concrete. The behavior of these materials also varied with the mixing procedure employed in their production. The addition of superplasticizer meant that there was a large reduction in the mixture's yield stress, while plastic viscosity remained practically constant.

Performance assessment for low-level radioactive waste disposal

International Nuclear Information System (INIS)

Cook, J.R.; Hsu, R.H.; Wilhite, E.L.; Yu, A.D.

1996-01-01

In October 1994 the Savannah River Site became the first US DOE complex to use concrete vaults to dispose of low-level radioactive solid waste and better prevent soil and groundwater contamination. This article describes the design and gives a performance assessment of the vaults. Topics include the following: Performance objectives; scope; the performance assessment process-assemble a multidisciplinary working group; collect available data; define credible pathways/scenarios; develop conceptual models; conduct screening and detailed model calculations; assess sensitivity/uncertainty; integrate and interpret results; report. 9 figs., 3 tabs

Love Me Tinder: Online Identity Performance and Romantic Relationship Initiation

OpenAIRE

Villani, Anna Marie; Hvass, Charlotte Colstrup; Lund-Larsen, Ida; Rørhøj, Jacob Mark; Vintersborg, Kathrine Mosbæk; Hansen, Mathias Constant Bek; Bengtsson, Teresa Imaya

2015-01-01

Our project explores Tinder – a mobile dating application we view as a product of our time, a modern phenomenon. Specifically, we look at online identity and romantic relationship initiation, taking into account Tinder’s evolution as an application, the users, and subjectivities. Through semiotics and image rhetoric, we analyze the taglines and photographs users post in their profiles. We relate this to performance theory, viewing Tinder as a virtual stage. We delve deeper into Tinder, honing...

Performance Evaluation of Orbit Determination System during Initial Phase of INSAT-3 Mission

Science.gov (United States)

Subramanian, B.; Vighnesam, N. V.

satellite. The orbit of the satellite had to be determined continuously at each stage of the initial phase of the mission at a brisk pace and this study shows that the ODS provided consistent results to meet the stringent requirements of the mission operations. At each stage of the mission the orbit was determined using tracking data obtained over varying periods of time. The orbit solutions obtained from short arc OD's are compared with that obtained using the longest arc OD of each stage of the initial phase of the mission. The results of this study have been tabled in this paper. The performance of the ODS in calibrating the ARIANE-4 launch vehicle has been analyzed. A comparison of the orbit elements obtained from the mission operational ODS with the injection parameters provided by CNES, Centre Spatial Guyanais has been made in this paper which shows that the satellite was injected well within the 1 dispersions quoted by ARIANE-SPACE. A comparison has also been shown between the determined transfer orbit elements with pre-launch nominal orbit elements. For the initial phase of this mission ranging support was provided by Hassan earth station at India and INMARSAT network of stations at LakeCowichan (Canada), Fucino (Italy) and Beijing (China). The performance of the tracking systems employed by these stations has been studied. The quality of tracking data obtained from these stations has also been assessed.

Initial experience using a robotic-driven laparoscopic needle holder with ergonomic handle: assessment of surgeons' task performance and ergonomics.

Science.gov (United States)

Sánchez-Margallo, Juan A; Sánchez-Margallo, Francisco M

2017-12-01

The objective of this study is to assess the surgeons' performance and ergonomics during the use of a robotic-driven needle holder in laparoscopic suturing tasks. Six right-handed laparoscopic surgeons with different levels of experience took part in this study. Participants performed a set of three different intracorporeal suturing tasks organized in ten trials during a period of five weeks. Surgeons used both conventional (Conv) and robotic (Rob) laparoscopic needle holders. Precision using the surgical needle, quality of the intracorporeal suturing performance, execution time and leakage pressure for the urethrovesical anastomosis, as well as the ergonomics of the surgeon's hand posture, were analyzed during the first, fifth and last trials. No statistically significant differences in precision and quality of suturing performance were obtained between both groups of instruments. Surgeons required more time using the robotic instrument than using the conventional needle holder to perform the urethrovesical anastomosis, but execution time was significantly reduced after training ([Formula: see text] 0.05). There were no differences in leakage pressure for the anastomoses carried out by both instruments. After training, novice surgeons significantly improved the ergonomics of the wrist ([Formula: see text] 0.05) and index finger (Conv: 36.381[Formula: see text], Rob: 30.389[Formula: see text]; p = 0.024) when using the robotic instrument compared to the conventional needle holder. Results have shown that, although both instruments offer similar technical performance, the robotic-driven instrument results in better ergonomics for the surgeon's hand posture compared to the use of a conventional laparoscopic needle holder in intracorporeal suturing.

Defense Acquisition Initiatives Review: An Assessment of Extant Initiatives

National Research Council Canada - National Science Library

Porter, Gene; Berteau, David; Christle, Gary; Mandelbaum, Jay; Diehl, Richard

2005-01-01

...) to identify and analyze a subset of initiatives that the team finds to have potential for near term management emphasis that could provide visible improvements to the much criticized Defense acquisition system...

Assessment Training Effects on Student Assessment Skills and Task Performance in a Technology-Facilitated Peer Assessment

Science.gov (United States)

Liu, Xiongyi; Li, Lan

2014-01-01

This study examines the impact of an assessment training module on student assessment skills and task performance in a technology-facilitated peer assessment. Seventy-eight undergraduate students participated in the study. The participants completed an assessment training exercise, prior to engaging in peer-assessment activities. During the…

A Specific Model for Assessing the Financial Performance:Case study on Building Sector Enterprises of Galati County - Romania

Directory of Open Access Journals (Sweden)

Nicoleta BARBUTA-MISU

2011-11-01

Full Text Available In this paper is designed a specific model for assessing the financial performance, based on models of bankruptcy risk, for enterprises acting in the building sector from Galati County - Romania. The main purpose of the paper is designing and development a model for evaluation financial performance that important for ranking enterprises. To choose model variables was used discriminate analysis on 22 variables proposed that separate objectively performant by non-performant enterprises. The proposed model with five variables was tested using the initial sample of enterprises obtaining an average success ratio of 81.82%.

News media coverage and initial public offerings in Germany: Explaining flotation performance

NARCIS (Netherlands)

Strauß, N.; van der Meer, T.G.L.A.

2017-01-01

Purpose The purpose of this paper is to investigate the relationships of news media coverage and the performance of initial public offerings (IPOs) in Germany. The aim is to find out how media attention, media sentiment, corporate information, and recency of news are related to the flotation

Clinical mentorship of nurse initiated antiretroviral therapy in Khayelitsha, South Africa: a quality of care assessment.

Directory of Open Access Journals (Sweden)

Ann Green

Full Text Available INTRODUCTION: To combat the AIDS epidemic and increase HIV treatment access, the South African government implemented a nurse-based, doctor-supported model of care that decentralizes administration of antiretroviral treatment (ART for HIV positive patients through nurse initiated and managed ART. Médecins Sans Frontières (MSF implemented a mentorship programme to ensure successful task-shifting, subsequently assessing the quality of clinical care provided by nurses. METHODS: A before-after cross-sectional study was conducted on nurses completing the mentorship programme in Khayelitsha, South Africa, from February 2011-September 2012. Routine clinical data from 229 patient folders and 21 self-assessment questionnaires was collected to determine the number of patients initiated on ART by nurses; quality of ART management before-after mentorship; patient characteristics for doctor and nurse ART initiations; and nurse self-assessments after mentorship. RESULTS: Twenty one nurses were authorized by one nurse mentor with one part-time medical officer's support, resulting in nurses initiating 77% of ART eligible patients. Improvements in ART management were found for drawing required bloods (91% vs 99%, p = 0.03, assessing adherence (50% vs 78%, p<0.001 and WHO staging (63% vs 91%, p<0.001. Nurse ART initiation indicators were successfully completed at 95-100% for 11 of 16 indicators: clinical presentation; patient weight; baseline blood work (CD4, creatinine, haemoglobin; STI screening; WHO stage, correlating medical history; medications prescribed appropriately; ART start date; and documented return date. Doctors initiated more patients with TB/HIV co-infection and WHO Stage 3 and 4 disease than nurses. Nurse confidence improved for managing HIV-infected children and pregnant women, blood result interpretation and long-term side effects. CONCLUSIONS: Implementation of a clinical mentorship programme in Khayelitsha led to nurse initiation of a

Initial Assessment of Parallelization of Monte Carlo Calculation using Graphics Processing Units

International Nuclear Information System (INIS)

Choi, Sung Hoon; Joo, Han Gyu

2009-01-01

Monte Carlo (MC) simulation is an effective tool for calculating neutron transports in complex geometry. However, because Monte Carlo simulates each neutron behavior one by one, it takes a very long computing time if enough neutrons are used for high precision of calculation. Accordingly, methods that reduce the computing time are required. In a Monte Carlo code, parallel calculation is well-suited since it simulates the behavior of each neutron independently and thus parallel computation is natural. The parallelization of the Monte Carlo codes, however, was done using multi CPUs. By the global demand for high quality 3D graphics, the Graphics Processing Unit (GPU) has developed into a highly parallel, multi-core processor. This parallel processing capability of GPUs can be available to engineering computing once a suitable interface is provided. Recently, NVIDIA introduced CUDATM, a general purpose parallel computing architecture. CUDA is a software environment that allows developers to manage GPU using C/C++ or other languages. In this work, a GPU-based Monte Carlo is developed and the initial assessment of it parallel performance is investigated

Assessments in the Global Peace Operations Initiative: A Systems Engineering Approach

Science.gov (United States)

2014-06-01

police unit GCC GPOI Coordination Committee GIG GPOI Implementation Guide GPOI Global Peace Operations Initiative GRC GPOI Regional Committee G8...degree necessary to build a coherent assessments framework. The GPOI Implementation Guide ( GIG ) begins by alluding to what the program intended to...elements and associated interactions fully observed and understood. Using the U.S. economy as an example, Driscoll (2011) illustrates the common

Initial performance assessment of the disposal of spent nuclear fuel and high-level waste stored at Idaho National Engineering Laboratory. Volume 1, Methodology and results

Energy Technology Data Exchange (ETDEWEB)

Rechard, R.P. [ed.

1993-12-01

This performance assessment characterized plausible treatment options conceived by the Idaho National Engineering Laboratory (INEL) for its spent fuel and high-level radioactive waste and then modeled the performance of the resulting waste forms in two hypothetical, deep, geologic repositories: one in bedded salt and the other in granite. The results of the performance assessment are intended to help guide INEL in its study of how to prepare wastes and spent fuel for eventual permanent disposal. This assessment was part of the Waste Management Technology Development Program designed to help the US Department of Energy develop and demonstrate the capability to dispose of its nuclear waste. Although numerous caveats must be placed on the results, the general findings were as follows: Though the waste form behavior depended upon the repository type, all current and proposed waste forms provided acceptable behavior in the salt and granite repositories.

Lightning Protection Performance Assessment of Transmission Line Based on ATP model Automatic Generation

Directory of Open Access Journals (Sweden)

Luo Hanwu

2016-01-01

Full Text Available This paper presents a novel method to solve the initial lightning breakdown current by combing ATP and MATLAB simulation software effectively, with the aims to evaluate the lightning protection performance of transmission line. Firstly, the executable ATP simulation model is generated automatically according to the required information such as power source parameters, tower parameters, overhead line parameters, grounding resistance and lightning current parameters, etc. through an interface program coded by MATLAB. Then, the data are extracted from the generated LIS files which can be obtained by executing the ATP simulation model, the occurrence of transmission lie breakdown can be determined by the relative data in LIS file. The lightning current amplitude should be reduced when the breakdown occurs, and vice the verse. Thus the initial lightning breakdown current of a transmission line with given parameters can be determined accurately by continuously changing the lightning current amplitude, which is realized by a loop computing algorithm that is coded by MATLAB software. The method proposed in this paper can generate the ATP simulation program automatically, and facilitates the lightning protection performance assessment of transmission line.

The role of performance assessment in radioactive waste disposal

International Nuclear Information System (INIS)

Stenhouse, M.J.

1998-01-01

Performance assessment has many applications in the field of radioactive waste management, none more important than demonstrating the suitability of a particular repository system for waste disposal. The role of performance assessment in radioactive waste disposal is discussed with reference to assessments performed in civilian waste management programmes. The process is, however, relevant, and may be applied directly to the disposal of defence-related wastes. When used in an open and transparent manner, performance assessment is a powerful methodology not only for convincing the authorities of the safety of a disposal concept, but also for gaining the wider acceptance of the general public for repository siting. 26 refs

Effects of Peer-Assessed Feedback, Goal Setting and a Group Contingency on Performance and Learning by 10-12-Year-Old Academy Soccer Players

Science.gov (United States)

Holt, Josh E.; Kinchin, Gary; Clarke, Gill

2012-01-01

Background: Coaches developing young talent in team sports must maximise practice and learning of essential game skills and accurately and continuously assess the performance and potential of each player. Relative age effects highlight an erroneous process of initial and on-going player assessment, based largely on subjective opinions of game…

Small animal PET: aspects of performance assessment

International Nuclear Information System (INIS)

Weber, Simone; Bauer, Andreas

2004-01-01

Dedicated small animal positron emission tomography (PET) systems are increasingly prevalent in industry (e.g. for preclinical drug development) and biological research. Such systems permit researchers to perform animal studies of a longitudinal design characterised by repeated measurements in single animals. With the advent of commercial systems, scanners have become readily available and increasingly popular. As a consequence, technical specifications are becoming more diverse, making scanner systems less broadly applicable. The investigator has, therefore, to make a decision regarding which type of scanner is most suitable for the intended experiments. This decision should be based on gantry characteristics and the physical performance. The first few steps have been taken towards standardisation of the assessment of performance characteristics of dedicated animal PET systems, though such assessment is not yet routinely implemented. In this review, we describe current methods of evaluation of physical performance parameters of small animal PET scanners. Effects of methodologically different approaches on the results are assessed. It is underscored that particular attention has to be paid to spatial resolution, sensitivity, scatter fraction and count rate performance. Differences in performance measurement methods are described with regard to commercially available systems, namely the Concorde MicroPET systems P4 and R4 and the quad-HIDAC. Lastly, consequences of differences in scanner performance parameters are rated with respect to applications of small animal PET. (orig.)

TSPA 1991: An initial total-system performance assessment for Yucca Mountain; Yucca Mountain Site Characterization Project

Energy Technology Data Exchange (ETDEWEB)

Barnard, R.W.; Wilson, M.L.; Dockery, H.A.; Kaplan, P.G.; Eaton, R.R.; Bingham, F.W. [Sandia National Labs., Albuquerque, NM (United States); Gauthier, J.H.; Robey, T.H. [Spectra Research Inst., Albuquerque, NM (United States)

1992-07-01

This report describes an assessment of the long-term performance of a repository system that contains deeply buried highly radioactive waste; the system is assumed to be located at the potential site at Yucca Mountain, Nevada. The study includes an identification of features, events, and processes that might affect the potential repository, a construction of scenarios based on this identification, a selection of models describing these scenarios (including abstraction of appropriate models from detailed models), a selection of probability distributions for the parameters in the models, a stochastic calculation of radionuclide releases for the scenarios, and a derivation of complementary cumulative distribution functions (CCDFs) for the releases. Releases and CCDFs are calculated for four categories of scenarios: aqueous flow (modeling primarily the existing conditions at the site, with allowances for climate change), gaseous flow, basaltic igneous activity, and human intrusion. The study shows that models of complex processes can be abstracted into more simplified representations that preserve the understanding of the processes and produce results consistent with those of more complex models.

Development of Integrated Assessment Technology of Risk and Performance

International Nuclear Information System (INIS)

Yang, Jun Eon; Kang, Dae Il; Kang, Hyun Gook

2010-04-01

The main idea and contents are summarized as below 1) Development of new risk/performance assessment system innovating old labor-intensive risk assessment structure - New consolidated risk assessment technology from various hazard(flood, fire, seismic in NPP) - BOP model development for performance monitoring - Consolidated risk/performance management system for consistency and efficiency of NPP 2) Resolution technology for pending issues in PSA - Base technology for PSA of digital I and C system - Base technology for seismic PSA reflecting domestic seismic characteristics and aging effect - Uncertainty reduction technology for level 2 PSA and best estimation of containment failure frequency 3) Next generation risk/performance assessment technology - Human-induced error reduction technology for efficient operation of a NPP

Comparative Assessment of Health Workers Performance and The ...

African Journals Online (AJOL)

Comparative Assessment of Health Workers Performance and The Performance ... had very high significant effect on performance of health workers which was independent of ... Keywords: Health Worker Performance Factors Hospitals Nigeria ...

Initial ORNL site assessment report on the storage of 233U

International Nuclear Information System (INIS)

Bereolos, P.J.; Yong, L.K.; Sadlowe, A.R.; Ramey, D.W.; Krichinsky, A.M.

1998-03-01

The 233 U storage facility at ORNL is Building 3019. The inventory stored in Building 3019 consists of 426.5 kg of 233 U contained in 1,387.1 kg of total uranium. The inventory is primarily in the form of uranium oxides; however, uranium metal and other compounds are also stored. Over 99% of the inventory is contained in 1,007 packages stored in tube vaults within the facility. A tank of thorium nitrate solution, the P-24 Tank, contains 0.13 kg of 233 U in ∼ 4,000 gal. of solution. The facility is receiving additional 233 U for storage from the remediation of the Molten Salt Reactor Experiment (MSRE) at ORNL. Consolidation of material from sites with small holdings is also adding to the 233 U inventory. Additionally, small quantities ( 233 U are in other research facilities at ORNL. A risk assessment process was chosen to evaluate the stored material and packages based on available package records. The risk scenario was considered the failure of a package (or a group of similar packages) in the Building 3019 inventory. The probability of such a failure depends on packaging factors such as the age and material of construction of the containers. The consequence of such a failure depends on the amount and form of the material within the packages. One thousand seven packages were categorized with this methodology resulting in 859 low-risk packages, 147 medium-risk packages, and 1 high-risk package. This initial assessment also documents the status of the evaluation of the Building 3019 and its systems for safe storage of 233 U. The final assessment report for ORNL storage of 233 U is scheduled for June 1999. The report will document the facility assessments, the specific package inspection plan, and the results of initial package inspections

Methodology for NDA performance assessment

International Nuclear Information System (INIS)

Cuypers, M.; Franklin, M.; Guardini, S.

1986-01-01

In the framework of the RandD programme of the Joint Research Centre of the Commission of the European Communities, a considerable effort is being dedicated to performance assessment of NDA techniques taking account of field conditions. By taking account of field conditions is meant measurement samples of the size encountered in practice and training which allows inspectors to design cost efficient verification plans for the real situations encountered in the field. Special laboratory facilities referred to as PERLA are being constructed for this purpose. These facilities will be used for measurement experiments and for training. In this paper, performance assessment is discussed under the headings of measurement capability and in-field effectiveness. Considerable emphasis is given to the role of method specific measurement error models. The authors outline the advantages of giving statistical error models a sounder basis in the physical phenomenology of the measurement method

Assessment of Coping Capability of KORI Unit 1 under Extended Loss AC Power and Loss of Ultimate Heat Sink Initiated by Beyond Design Natural Disaster

Energy Technology Data Exchange (ETDEWEB)

Kim, Chang Hyun; Ha, Sang Jun [KHNP CRI, Daejeon (Korea, Republic of); Han, Kee Soo [Nuclear Engineering Service and Solution (NESS) Co. Ltd., Deajeon (Korea, Republic of); Park, Chan Eok [KEPCO Engineering and Constructd., Deajeon (Korea, Republic of)

2016-10-15

In Korea, the government and industry performed comprehensive safety inspection on all domestic nuclear power plants against beyond design basis external events and fifty action items have been issued. In addition to post- Fukushima action items, the stress tests for all domestic nuclear power plants are on the way to enhance the safety of domestic nuclear power plants through finding the vulnerabilities in intentional stress conditions initiated by beyond design natural disaster. This paper presents assessment results of coping capability of KORI Unit 1 under the simultaneous Extended Loss of AC Power (ELAP) and Loss of Ultimate Heat Sink (LUHS) which is a representative plant condition initiated by beyond design natural disaster. The assessment of the coping capability of KORI Unit 1 has been performed under simultaneous the extended loss of AC power and loss of ultimate heat sink initiated by beyond design natural disaster. It is concluded that KORI Unit 1 has the capability, in the event of loss of safety functions by beyond design natural disaster, to sufficiently cool down the reactor core without fuel damage, to keep pressure boundaries of the reactor coolant system in transient condition and to control containment and temperature to maintain the integrity of the containment buildings.

Assessment of Coping Capability of KORI Unit 1 under Extended Loss AC Power and Loss of Ultimate Heat Sink Initiated by Beyond Design Natural Disaster

International Nuclear Information System (INIS)

Kim, Chang Hyun; Ha, Sang Jun; Han, Kee Soo; Park, Chan Eok

2016-01-01

In Korea, the government and industry performed comprehensive safety inspection on all domestic nuclear power plants against beyond design basis external events and fifty action items have been issued. In addition to post- Fukushima action items, the stress tests for all domestic nuclear power plants are on the way to enhance the safety of domestic nuclear power plants through finding the vulnerabilities in intentional stress conditions initiated by beyond design natural disaster. This paper presents assessment results of coping capability of KORI Unit 1 under the simultaneous Extended Loss of AC Power (ELAP) and Loss of Ultimate Heat Sink (LUHS) which is a representative plant condition initiated by beyond design natural disaster. The assessment of the coping capability of KORI Unit 1 has been performed under simultaneous the extended loss of AC power and loss of ultimate heat sink initiated by beyond design natural disaster. It is concluded that KORI Unit 1 has the capability, in the event of loss of safety functions by beyond design natural disaster, to sufficiently cool down the reactor core without fuel damage, to keep pressure boundaries of the reactor coolant system in transient condition and to control containment and temperature to maintain the integrity of the containment buildings

Current perspectives on performance assessment at the NRC

International Nuclear Information System (INIS)

Coplan, S.M.; Eisenberg, N.A.; Federline, M.V.; Randall, J.D.

1992-01-01

The Nuclear Regulatory Commission (NRC) staff is engaging in a number of activities involving performance assessment in order to support NRC's program in high-level waste management. Broad areas of activity include: (1) reactive work responding to products and activities of the Department of Energy (DOE), (2) proactive work, including development of an independent performance assessment capability, development of guidance for DOE, support for technical and programmatic integration, (3) a program of regulatory research, and (4) participation in a number of international activities. As the U.S. high-level waste program continues to mature, performance assessment is seen as playing a more prominent role in evaluating safety and focussing technical activities

Preliminary Assessment of Suomi-NPP VIIRS On-orbit Radiometric Performance

Science.gov (United States)

Oudrari, Hassan; DeLuccia, Frank; McIntire, Jeff; Moyer, David; Chiang, Vincent; Xiong, Xiao-xiong; Butler, James

2012-01-01

The Visible-Infrared Imaging Radiometer Suite (VIIRS) is a key instrument on-board the Suomi National Polar-orbiting Partnership (NPP) spacecraft that was launched on October 28th 2011. VIIRS was designed to provide moderate and imaging resolution of most of the globe twice daily. It is a wide-swath (3,040 km) cross-track scanning radiometer with spatial resolutions of 370.and 740 m at nadir for imaging and moderate bands, respectively. It has 22 spectral bands covering the spectrum between 0.412 11m and 12.01 11m, including 14 reflective solar bands (RSB), 7 thermal emissive bands (TEB), and 1 day-night band (ON B). VIIRS observations are used to generate 22 environmental data products (EORs). This paper will briefly describe NPP VIIRS calibration strategies performed by the independent government team, for the initial on-orbit Intensive Calibration and Validation (ICV) activities. In addition, this paper will provide an early assessment of the sensor on-orbit radiometric performance, such as the sensor signal to noise ratios (SNRs), dual gain transition verification, dynamic range and linearity, reflective bands calibration based on the solar diffuser (SO) and solar diffuser stability monitor (SOSM), and emissive bands calibration based on the on-board blackbody calibration (OBC). A comprehensive set of performance metrics generated during the pre-launch testing program will be compared to VIIRS on-orbit early performance, and a plan for future cal/val activities and performance enhancements will be presented.

Demonstration of a performance assessment methodology for high-level radioactive waste disposal in basalt formations

International Nuclear Information System (INIS)

Bonano, E.J.; Davis, P.A.; Shipers, L.R.; Brinster, K.F.; Beyler, W.E.; Updegraff, C.D.; Shepherd, E.R.; Tilton, L.M.; Wahi, K.K.

1989-06-01

This document describes a performance assessment methodology developed for a high-level radioactive waste repository mined in deep basalt formations. This methodology is an extension of an earlier one applicable to bedded salt. The differences between the two methodologies arise primarily in the modeling of round-water flow and radionuclide transport. Bedded salt was assumed to be a porous medium, whereas basalt formations contain fractured zones. Therefore, mathematical models and associated computer codes were developed to simulate the aforementioned phenomena in fractured media. The use of the methodology is demonstrated at a hypothetical basalt site by analyzing seven scenarios: (1) thermohydrological effects caused by heat released from the repository, (2) mechanohydrological effects caused by an advancing and receding glacier, (3) normal ground-water flow, (4) pumping of ground water from a confined aquifer, (5) rerouting of a river near the repository, (6) drilling of a borehole through the repository, and (7) formation of a new fault intersecting the repository. The normal ground-water flow was considered the base-case scenario. This scenario was used to perform uncertainty and sensitivity analyses and to demonstrate the existing capabilities for assessing compliance with the ground-water travel time criterion and the containment requirements. Most of the other scenarios were considered perturbations of the base case, and a few were studied in terms of changes with respect to initial conditions. The potential impact of these scenarios on the long-term performance of the disposal system was ascertained through comparison with the base-case scenario or the undisturbed initial conditions. 66 refs., 106 figs., 27 tabs

Interpreting the need for initial support to perform tandem stance tests of balance

NARCIS (Netherlands)

Hile, E.S.; Brach, J.S.; Perera, S.; Wert, D.M.; VanSwearingen, J.M.; Studenski, S.A.

2012-01-01

BACKGROUND: Geriatric rehabilitation reimbursement increasingly requires documented deficits on standardized measures. Tandem stance performance can characterize balance, but protocols are not standardized. Objective The purpose of this study was to explore the impact of: (1) initial support to

Some viewpoints on reference biospheres in Finnish performance assessments

International Nuclear Information System (INIS)

Rasilainen, K.; Kattilakoski, E.; Suolanen, V.; Vieno, T.; Vuori, S.

2002-01-01

Viewpoints are presented concerning biosphere studies in performance assessments of nuclear waste disposal. The points are based on experiences from several Finnish performance assessments. The latest performance assessment for spent fuel disposal, TILA-99, was considered in the Decision in Principle process for the site selection of the repository. The points given are also based on experiences from participation in international projects dealing with biosphere modelling, for instance BIOMOVS and BIOMASS. (author)

The link between performance assessment and quality of data

International Nuclear Information System (INIS)

Csullog, G.W.

1990-11-01

Performance assessments, using both individual and cumulative inventories, produce estimates of the risk or dose consequences for repository concepts. Unacceptable risk or dose for a given contaminant identify it as a problem contaminant. While risk or dose consequences are common outputs of safety assessments, results can also be reported as estimates of the safe inventory limit for each contaminant in a repository scenario. Once problem contaminants are identified, it may be useful to: validate the data used in the performance assessment; restrict contaminant inventories in the repository; or, improve the containment capability of the repository (including improved packaging). A key point is that performance assessments define the quality of data to be collected. If a contaminant's inventory will be far below its estimated safe inventory limit for a repository, then it is reasonable to accept inventory estimates that have high variances and low confidence. For contaminants that have a significant impact upon performance assessments, efforts must be made to provide the best inventory (source term) estimates practicable. One important goal of characterization programs should be to establish the adequacy of data used in performance assessments. There is little value in striving to improve confidence in data for some waste streams if they are assessed to have a minor impact upon repository performance. Streams that have a major impact upon performance deserve the time, attention and money to be characterized adequately. Waste acceptance must be linked to the quality of characterization data provided by generators. This link sets compliance monitoring requirements

Hanford low-level tank waste interim performance assessment

International Nuclear Information System (INIS)

Mann, F.M.

1997-01-01

The Hanford Low-Level Tank Waste Interim Performance Assessment examines the long-term environmental and human health effects associated with the disposal of the low-level fraction of the Hanford single and double-shell tank waste in the Hanford Site 200 East Area. This report was prepared as a good management practice to provide needed information about the relationship between the disposal system design and performance early in the disposal system project cycle. The calculations in this performance assessment show that the disposal of the low-level fraction can meet environmental and health performance objectives

[Relational database for urinary stone ambulatory consultation. Assessment of initial outcomes].

Science.gov (United States)

Sáenz Medina, J; Páez Borda, A; Crespo Martinez, L; Gómez Dos Santos, V; Barrado, C; Durán Poveda, M

2010-05-01

To create a relational database for monitoring lithiasic patients. We describe the architectural details and the initial results of the statistical analysis. Microsoft Access 2002 was used as template. Four different tables were constructed to gather demographic data (table 1), clinical and laboratory findings (table 2), stone features (table 3) and therapeutic approach (table 4). For a reliability analysis of the database the number of correctly stored data was gathered. To evaluate the performance of the database, a prospective analysis was conducted, from May 2004 to August 2009, on 171 stone free patients after treatment (EWSL, surgery or medical) from a total of 511 patients stored in the database. Lithiasic status (stone free or stone relapse) was used as primary end point, while demographic factors (age, gender), lithiasic history, upper urinary tract alterations and characteristics of the stone (side, location, composition and size) were considered as predictive factors. An univariate analysis was conducted initially by chi square test and supplemented by Kaplan Meier estimates for time to stone recurrence. A multiple Cox proportional hazards regression model was generated to jointly assess the prognostic value of the demographic factors and the predictive value of stones characteristics. For the reliability analysis 22,084 data were available corresponding to 702 consultations on 511 patients. Analysis of data showed a recurrence rate of 85.4% (146/171, median time to recurrence 608 days, range 70-1758). In the univariate and multivariate analysis, none of the factors under consideration had a significant effect on recurrence rate (p=ns). The relational database is useful for monitoring patients with urolithiasis. It allows easy control and update, as well as data storage for later use. The analysis conducted for its evaluation showed no influence of demographic factors and stone features on stone recurrence.

Assessing the Performance of Natural Resource Systems

Directory of Open Access Journals (Sweden)

Bruce Campbell

2002-01-01

Full Text Available Assessing the performance of management is central to natural resource management, in terms of improving the efficiency of interventions in an adaptive-learning cycle. This is not simple, given that such systems generally have multiple scales of interaction and response; high frequency of nonlinearity, uncertainty, and time lags; multiple stakeholders with contrasting objectives; and a high degree of context specificity. The importance of bounding the problem and preparing a conceptual model of the system is highlighted. We suggest that the capital assets approach to livelihoods may be an appropriate organizing principle for the selection of indicators of system performance. In this approach, five capital assets are recognized: physical, financial, social, natural, and human. A number of principles can be derived for each capital asset; indicators for assessing system performance should cover all of the principles. To cater for multiple stakeholders, participatory selection of indicators is appropriate, although when cross-site comparability is required, some generic indicators are suitable. Because of the high degree of context specificity of natural resource management systems, a typology of landscapes or resource management domains may be useful to allow extrapolation to broader systems. The problems of nonlinearities, uncertainty, and time lags in natural resource management systems suggest that systems modeling is crucial for performance assessment, in terms of deriving "what would have happened anyway" scenarios for comparison to the measured trajectory of systems. Given that a number of indicators are necessary for assessing performance, the question becomes whether these can be combined to give an integrative assessment. We explore five possible approaches: (1 simple additive index, as used for the Human Development Index; (2 derived variables (e.g., principal components as the indices of performance; (3 two-dimensional plots of

Initial Technology Assessment for the Large-Aperture UV-Optical-Infrared (LUVOIR) Mission Concept Study

Science.gov (United States)

Bolcar, Matthew R.; Feinberg, Lee; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

2016-01-01

The NASA Astrophysics Division's 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet/optical/infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for biosignatures via direct-imaging and spectroscopic characterization of habitable exoplanets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV/Optical/Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

Performance Assessment for Pump-and-Treat Closure or Transition

Energy Technology Data Exchange (ETDEWEB)

Truex, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Christian D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Becker, Dave J. [U.S. Army Corps of Engineers Environmental and Munitions Center of Expertise, Huntsville, AL (United States); Lee, Michelle H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Nimmons, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-09-29

A structured performance assessment approach is useful to evaluate pump-and-treat (P&T) groundwater remediation, which has been applied at numerous sites. Consistent with the U.S. Environmental Protection Agency’s Groundwater Road Map, performance assessment during remedy implementation may be needed, and should consider remedy optimization, transition to alternative remedies, or remedy closure. In addition, a recent National Research Council study examined groundwater remediation at complex contaminated sites and concluded that it may be beneficial to evaluate remedy performance and the potential need for transition to alternative approaches at these sites. The intent of this document is to provide a structured approach for assessing P&T performance to support a decision to optimize, transition, or close a P&T remedy. The process presented in this document for gathering information and performing evaluations to support P&T remedy decisions includes use of decision elements to distinguish between potential outcomes of a remedy decision. Case studies are used to augment descriptions of decision elements and to illustrate each type of outcome identified in the performance assessment approach. The document provides references to resources for tools and other guidance relevant to conducting the P&T assessment.

42 CFR 460.132 - Quality assessment and performance improvement plan.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Quality assessment and performance improvement plan... assessment and performance improvement plan. (a) Basic rule. A PACE organization must have a written quality assessment and performance improvement plan. (b) Annual review. The PACE governing body must review the plan...

[Teaching performance assessment in Public Health employing three different strategies].

Science.gov (United States)

Martínez-González, Adrián; Moreno-Altamirano, Laura; Ponce-Rosas, Efrén Raúl; Martínez-Franco, Adrián Israel; Urrutia-Aguilar, María Esther

2011-01-01

The educational system depends upon the quality and performance of their faculty and should therefore be process of continuous improvement. To assess the teaching performance of the Public Health professors, at the Faculty of Medicine, UNAM through three strategies. Justification study. The evaluation was conducted under a mediational model through three strategies: students' opinion assessment, self-assessment and students' academic achievement. We applied descriptive statistics, Student t test, ANOVA and Pearson correlation. Twenty professors were evaluated from the Public Health department, representing 57% of all them who teach the subject. The professor's performance was highly valued self-assessment compared with assessment of student opinion, was confirmed by statistical analysis the difference was significant. The difference amongst the three evaluation strategies became more evident between self-assessment and the scores obtained by students in their academic achievement. The integration of these three strategies offers a more complete view of the teacher's performance quality. Academic achievement appears to be a more objective strategy for teaching performance assessment than students' opinion and self-assessment.

ASSESSING STUDENT PERFORMANCE ON INTERPRETING THROUGH PEER-ASSESSMENT

Directory of Open Access Journals (Sweden)

Titik Ismailia

2017-12-01

Full Text Available As a part of translation interpreting is translating spoken discourse orally. It needs some requirements like ability to speak clearly, clarity, fluency, eye contact, and self-confidence. It also needs linguistic proficiency, analytical skill, listening and recall, interpersonal skills, ethical behaviour, speaking skills, cultural knowledge, and subject knowledge. Evaluating students performance on interpreting can be done through peer assessment. Peer- assessment is one of alternative assessment to grade the peers in group or individuals by commenting on and judging other students work. To do this process there is a join work between listening and speaking, and two students. The first student as a speaker and the second student as an interpreter. Both of them should do the same quality on speak clearly as a speaker and as an interpreter should able to listen and translating the spoken discourse orally. Evaluation can use analytical grade that allows teacher to set clear criteria for correction like fluency, grammar, terminology, general content, and mechanics. Students and teacher can give comment on every criteria based on their own competency. During the process on making criteria, students and teacher can discuss and give reasonable suggestion to make the assessment suitable to the students competency. At the end, a rubric of assessment with the score from 0 to 100 and criteria and also the comment included in the paper of assessment.

Waste package performance assessment

International Nuclear Information System (INIS)

Lester, D.H.

1981-01-01

This paper describes work undertaken to assess the life-expectancy and post-failure nuclide release behavior of high-level and waste packages in a geologic repository. The work involved integrating models of individual phenomena (such as heat transfer, corrosion, package deformation, and nuclide transport) and using existing data to make estimates of post-emplacement behavior of waste packages. A package performance assessment code was developed to predict time to package failure in a flooded repository and subsequent transport of nuclides out of the leaking package. The model has been used to evaluate preliminary package designs. The results indicate, that within the limitation of model assumptions and data base, packages lasting a few hundreds of years could be developed. Very long lived packages may be possible but more comprehensive data are needed to confirm this

Governing climate change transnationally: assessing the evidence from a database of sixty initiatives

NARCIS (Netherlands)

Bulkeley, H.; Andanova, L.; Bäckstrand, K.; Betsill, M.; Compagnon, D.; Duffy, R.; Kolk, A.; Hoffmann, M.; Levy, D.; Newell, P.; Milledge, T.; Paterson, M.; Pattberg, P.; VanDeveer, S.

2012-01-01

With this paper we present an analysis of sixty transnational governance initiatives and assess the implications for our understanding of the roles of public and private actors, the legitimacy of governance ‘beyond’ the state, and the North-South dimensions of governing climate change. In the first

Governing Climate Change Transnationally: Assessing the Evidence from a Survey of Sixty Initiatives

NARCIS (Netherlands)

Bulkeley, H.; Andonova, L.; Backstrand, K.; Betsill, M.; Compagnon, D.; Duffy, R.; Levy, D.; Hofmann, M.; Kolk, A.; Paterson, M.; Pattberg, P.H.; VanDeveer, S.

2012-01-01

With this paper we present an analysis of sixty transnational governance initiatives and assess the implications for our understanding of the roles of public and private actors, the legitimacy of governance 'beyond' the state, and the North-South dimensions of governing climate change. In the first

Initial assessment of an airborne Ku-band polarimetric SAR.

Energy Technology Data Exchange (ETDEWEB)

Raynal, Ann Marie; Doerry, Armin Walter

2013-02-01

Polarimetric synthetic aperture radar (SAR) has been used for a variety of dual-use research applications since the 1940s. By measuring the direction of the electric field vector from radar echoes, polarimetry may enhance an analysts understanding of scattering effects for both earth monitoring and tactical surveillance missions. Polarimetry may provide insight into surface types, materials, or orientations for natural and man-made targets. Polarimetric measurements may also be used to enhance the contrast between scattering surfaces such as man-made objects and their surroundings. This report represents an initial assessment of the utility of, and applications for, polarimetric SAR at Ku-band for airborne or unmanned aerial systems.

Mentoring a health technology assessment initiative in Kazakhstan.

Science.gov (United States)

Muratov, Sergei; Hailey, David; Foerster, Vicki; Brady, Bruce; Juzwishin, Don; la Fleur, Philip; McGowan, Jessie

2014-04-01

The aim of this study was to assist in the development of a health technology assessment (HTA) program for the Ministry of Health (MOH) of the Republic of Kazakhstan Mentoring of an initial HTA program in Kazakhstan was provided by the Canadian Society for International Health (CSIH) by means of a partnership with the Kazakhstan MOH. HTA materials, courses, and one-on-one support for the preparation of a series of initial HTA reports by MOH HTA staff were provided by a seven-member CSIH team over a 2.5-year project. Guidance documents on HTA and institutional strengthening were prepared in response to an extensive set of deliverables developed by the MOH and the World Bank. Introductory and train-the-trainer workshops in HTA and economic evaluation were provided for MOH staff members, experts from Kazakhstan research institutes and physicians. Five short HTA reports were successfully developed by staff in the Ministry's HTA Unit with assistance from the CSIH team. Challenges that may be relevant to other emerging HTA programs included lack of familiarity with some essential underlying concepts, organization culture, and limited time for MOH staff to do HTA work. The project helped to define the need for HTA and mentored MOH staff in taking the first steps to establish a program to support health policy decision making in Kazakhstan. This experience offers practical lessons for other emerging HTA programs, although these should be tailored to the specific context.

Assessment of Student Music Performances Using Deep Neural Networks

Directory of Open Access Journals (Sweden)

Kumar Ashis Pati

2018-03-01

Full Text Available Music performance assessment is a highly subjective task often relying on experts to gauge both the technical and aesthetic aspects of the performance from the audio signal. This article explores the task of building computational models for music performance assessment, i.e., analyzing an audio recording of a performance and rating it along several criteria such as musicality, note accuracy, etc. Much of the earlier work in this area has been centered around using hand-crafted features intended to capture relevant aspects of a performance. However, such features are based on our limited understanding of music perception and may not be optimal. In this article, we propose using Deep Neural Networks (DNNs for the task and compare their performance against a baseline model using standard and hand-crafted features. We show that, using input representations at different levels of abstraction, DNNs can outperform the baseline models across all assessment criteria. In addition, we use model analysis techniques to further explain the model predictions in an attempt to gain useful insights into the assessment process. The results demonstrate the potential of using supervised feature learning techniques to better characterize music performances.

Interaction Effects of Happiness and Physical Activity on Smoking Initiation.

Science.gov (United States)

Torchyan, Armen A; BinSaeed, Abdulaziz A; Aleid, Yazeed S; Nagshbandi, Ahmed A; Almousa, Fahad; Papikyan, Satenik L; Gosadi, Ibrahim M

2016-11-01

Our aim was to assess the potential relationships among happiness, physical activity, and smoking initiation among undergraduate medical students in Saudi Arabia. We performed a cross-sectional study of randomly selected first- to fifth-year undergraduate medical students. Smoking initiation was defined as "ever trying smoking a cigarette, waterpipe, cigar/cigarillo, or other type of tobacco, even one or 2 puffs." The short scale Oxford Happiness Questionnaire was used to assess each student's happiness. Multivariate logistic regression analysis was performed. Of the 406 students surveyed (208 boys, 198 girls), 86 (21.1%) had initiated smoking. We found an interaction between physical activity (PA) and happiness on smoking initiation (p-interaction = .012). Among boys with low levels of PA, lower levels of happiness were associated with a greater likelihood of smoking initiation (OR = 5.8, 95%CI = 1.9 - 17.5). Also, high levels of PA increased the chance of smoking initiation among male students with high levels of happiness (OR = 5.6, 95%CI = 2.1 - 14.5). Our results suggest that young men with low levels of happiness and low levels of PA, as well as high levels of PA and high levels of happiness, may be targeted as a priority population in tobacco control intervention programs.

Initiating events frequency determination

International Nuclear Information System (INIS)

Simic, Z.; Mikulicic, V.; Vukovic, I.

2004-01-01

The paper describes work performed for the Nuclear Power Station (NPS). Work is related to the periodic initiating events frequency update for the Probabilistic Safety Assessment (PSA). Data for all relevant NPS initiating events (IE) were reviewed. The main focus was on events occurring during most recent operating history (i.e., last four years). The final IE frequencies were estimated by incorporating both NPS experience and nuclear industry experience. Each event was categorized according to NPS individual plant examination (IPE) initiating events grouping approach. For the majority of the IE groups, few, or no events have occurred at the NPS. For those IE groups with few or no NPS events, the final estimate was made by means of a Bayesian update with general nuclear industry values. Exceptions are rare loss-of-coolant-accidents (LOCA) events, where evaluation of engineering aspects is used in order to determine frequency.(author)

VISUAL ART TEACHERS AND PERFORMANCE ASSESSMENT ...

African Journals Online (AJOL)

Charles

Senior Secondary school visual art teachers constituted the sample of this ... and Performance Assessment Methods in Nigerian Senior Secondary Schools – Bello .... definition includes knowledge, skills, attitudes, metacognition and strategic ...

40 CFR 62.14720 - What information must I submit following my initial performance test?

Science.gov (United States)

2010-07-01

... report for the initial performance test results obtained under § 62.14660, as applicable. (b) The values... fabric filter to comply with the emission limitations, documentation that a bag leak detection system has...

ANALYSING PERFORMANCE ASSESSMENT IN PUBLIC SERVICES: HOW USEFUL IS THE CONCEPT OF A PERFORMANCE REGIME?

Science.gov (United States)

Martin, Steve; Nutley, Sandra; Downe, James; Grace, Clive

2016-03-01

Approaches to performance assessment have been described as 'performance regimes', but there has been little analysis of what is meant by this concept and whether it has any real value. We draw on four perspectives on regimes - 'institutions and instruments', 'risk regulation regimes', 'internal logics and effects' and 'analytics of government' - to explore how the concept of a multi-dimensional regime can be applied to performance assessment in public services. We conclude that the concept is valuable. It helps to frame comparative and longitudinal analyses of approaches to performance assessment and draws attention to the ways in which public service performance regimes operate at different levels, how they change over time and what drives their development. Areas for future research include analysis of the impacts of performance regimes and interactions between their visible features (such as inspections, performance indicators and star ratings) and the veiled rationalities which underpin them.

Consideration of liners and covers in performance assessments

Energy Technology Data Exchange (ETDEWEB)

Phifer, Mark A. [Savannah River National Laboratory, Aiken, SC (United States); Seitz, Robert R. [Savannah River National Laboratory, Aiken, SC (United States); Suttora, Linda C. [USDOE Enviromental Management, Washington, DC (United States)

2014-09-18

On-site disposal cells are in use and being considered at several United States Department of Energy (USDOE) sites as the final disposition for large amounts of waste associated with cleanup of contaminated areas and facilities. These disposal cells are typically regulated by States and/or the U.S. Environmental Protection Agency under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) in addition to having to comply with requirements in DOE Order 435.1, Radioactive Waste Management due to the radioactive waste. The USDOE-Environmental Management Office of Site Restoration formed a working group to foster improved communication and sharing of information for personnel associated with these CERCLA disposal cells and work towards more consistent assumptions, as appropriate, for technical and policy considerations related to CERCLA risk assessments and DOE Order 435.1 performance assessments in support of a Record of Decision and Disposal Authorization Statement, respectively. One of the issues considered by the working group, which is addressed in this report, was how to appropriately consider the performance of covers and liners/leachate collections systems in the context of a DOE Order 435.1 performance assessment (PA). This same information may be appropriate for consideration within CERCLA risk assessments for these facilities. These OSDCs are generally developed to meet hazardous waste (HW) disposal design standards under the Resource Conservation and Recovery Act (RCRA) as well as the DOE Order 435.1 performance based standards for disposal of radioactive waste. To meet the standards for HW, the facilities typically include engineered covers and liner/leachate collection systems. Thus, when considering such facilities in the context of a DOE Order 435.1 PA, there is a need to address the evolution of performance of covers and liner/leachate collection systems in the context of meeting a performance standard considering time

Initial construct validity evidence of a virtual human application for competency assessment in breaking bad news to a cancer patient

Directory of Open Access Journals (Sweden)

Guetterman TC

2017-07-01

Full Text Available Timothy C Guetterman,1 Frederick W Kron,1 Toby C Campbell,2 Mark W Scerbo,3 Amy B Zelenski,4 James F Cleary,5 Michael D Fetters1 1Department of Family Medicine, University of Michigan, Ann Arbor, MI, 2Department of Medicine, University of Wisconsin–Madison, Madison, WI, 3Department of Psychology, Old Dominion University, Norfolk, VA, 4Department of General Internal Medicine, University of Wisconsin–Madison, University of Wisconsin Medical Foundation, 5Department of Medicine, School of Medicine and Public Health, University of Wisconsin–Madison, Clinical Science Center, Madison, WI, USA Background: Despite interest in using virtual humans (VHs for assessing health care ­communication, evidence of validity is limited. We evaluated the validity of a VH application, MPathic-VR, for assessing performance-based competence in breaking bad news (BBN to a VH patient.Methods: We used a two-group quasi-experimental design, with residents participating in a 3-hour seminar on BBN. Group A (n=15 completed the VH simulation before and after the seminar, and Group B (n=12 completed the VH simulation only after the BBN seminar to avoid the possibility that testing alone affected performance. Pre- and postseminar differences for Group A were analyzed with a paired t-test, and comparisons between Groups A and B were analyzed with an independent t-test.Results: Compared to the preseminar result, Group A’s postseminar scores improved significantly, indicating that the VH program was sensitive to differences in assessing performance-based competence in BBN. Postseminar scores of Group A and Group B were not significantly different, indicating that both groups performed similarly on the VH program.Conclusion: Improved pre–post scores demonstrate acquisition of skills in BBN to a VH patient. Pretest sensitization did not appear to influence posttest assessment. These results provide initial construct validity evidence that the VH program is effective for

Initial development of a practical safety audit tool to assess fleet safety management practices.

Science.gov (United States)

Mitchell, Rebecca; Friswell, Rena; Mooren, Lori

2012-07-01

Work-related vehicle crashes are a common cause of occupational injury. Yet, there are few studies that investigate management practices used for light vehicle fleets (i.e. vehicles less than 4.5 tonnes). One of the impediments to obtaining and sharing information on effective fleet safety management is the lack of an evidence-based, standardised measurement tool. This article describes the initial development of an audit tool to assess fleet safety management practices in light vehicle fleets. The audit tool was developed by triangulating information from a review of the literature on fleet safety management practices and from semi-structured interviews with 15 fleet managers and 21 fleet drivers. A preliminary useability assessment was conducted with 5 organisations. The audit tool assesses the management of fleet safety against five core categories: (1) management, systems and processes; (2) monitoring and assessment; (3) employee recruitment, training and education; (4) vehicle technology, selection and maintenance; and (5) vehicle journeys. Each of these core categories has between 1 and 3 sub-categories. Organisations are rated at one of 4 levels on each sub-category. The fleet safety management audit tool is designed to identify the extent to which fleet safety is managed in an organisation against best practice. It is intended that the audit tool be used to conduct audits within an organisation to provide an indicator of progress in managing fleet safety and to consistently benchmark performance against other organisations. Application of the tool by fleet safety researchers is now needed to inform its further development and refinement and to permit psychometric evaluation. Copyright © 2012 Elsevier Ltd. All rights reserved.

Assessing irrigation performance by using remote sensing

NARCIS (Netherlands)

Bandara, K.M.P.S.

2006-01-01

Keywords: Performance indicators, performance assessment, diagnostic approach, SEBAL, target level, grain yield, water productivity, error estimation, spatio-temporal resolution.

In

Incorrect Weighting of Absolute Performance in Self-Assessment

Science.gov (United States)

Jeffrey, Scott A.; Cozzarin, Brian

Students spend much of their life in an attempt to assess their aptitude for numerous tasks. For example, they expend a great deal of effort to determine their academic standing given a distribution of grades. This research finds that students use their absolute performance, or percentage correct as a yardstick for their self-assessment, even when relative standing is much more informative. An experiment shows that this reliance on absolute performance for self-evaluation causes a misallocation of time and financial resources. Reasons for this inappropriate responsiveness to absolute performance are explored.

Development and Initial Validation of the Counseling Center Assessment of Psychological Symptoms-34

Science.gov (United States)

Locke, Benjamin D.; McAleavey, Andrew A.; Zhao, Yu; Lei, Pui-Wa; Hayes, Jeffrey A.; Castonguay, Louis G.; Li, Hongli; Tate, Robin; Lin, Yu-Chu

2012-01-01

A short version of the Counseling Center Assessment of Psychological Symptoms-62 (CCAPS-62) was created via three studies. The final short version (CCAPS-34), which contains 34 items and 7 subscales, demonstrated good discrimination power, support for the proposed factor structure, strong initial convergent validity, and adequate test-retest…

Performance assessment for underground radioactive waste disposal systems

International Nuclear Information System (INIS)

1985-01-01

A waste disposal system comprises a number of subsystems and components. The performance of most systems can be demonstrated only indirectly because of the long period that would be required to test them. This report gives special attention to performance assessment of subsystems within the total waste disposal system, and is an extension of an IAEA report on Safety Assessment for the Underground Disposal of Radioactive Wastes

Self-assessed performance improves statistical fusion of image labels

Energy Technology Data Exchange (ETDEWEB)

Bryan, Frederick W., E-mail: frederick.w.bryan@vanderbilt.edu; Xu, Zhoubing; Asman, Andrew J.; Allen, Wade M. [Electrical Engineering, Vanderbilt University, Nashville, Tennessee 37235 (United States); Reich, Daniel S. [Translational Neuroradiology Unit, National Institute of Neurological Disorders and Stroke, National Institutes of Health, Bethesda, Maryland 20892 (United States); Landman, Bennett A. [Electrical Engineering, Vanderbilt University, Nashville, Tennessee 37235 (United States); Biomedical Engineering, Vanderbilt University, Nashville, Tennessee 37235 (United States); and Radiology and Radiological Sciences, Vanderbilt University, Nashville, Tennessee 37235 (United States)

2014-03-15

Purpose: Expert manual labeling is the gold standard for image segmentation, but this process is difficult, time-consuming, and prone to inter-individual differences. While fully automated methods have successfully targeted many anatomies, automated methods have not yet been developed for numerous essential structures (e.g., the internal structure of the spinal cord as seen on magnetic resonance imaging). Collaborative labeling is a new paradigm that offers a robust alternative that may realize both the throughput of automation and the guidance of experts. Yet, distributing manual labeling expertise across individuals and sites introduces potential human factors concerns (e.g., training, software usability) and statistical considerations (e.g., fusion of information, assessment of confidence, bias) that must be further explored. During the labeling process, it is simple to ask raters to self-assess the confidence of their labels, but this is rarely done and has not been previously quantitatively studied. Herein, the authors explore the utility of self-assessment in relation to automated assessment of rater performance in the context of statistical fusion. Methods: The authors conducted a study of 66 volumes manually labeled by 75 minimally trained human raters recruited from the university undergraduate population. Raters were given 15 min of training during which they were shown examples of correct segmentation, and the online segmentation tool was demonstrated. The volumes were labeled 2D slice-wise, and the slices were unordered. A self-assessed quality metric was produced by raters for each slice by marking a confidence bar superimposed on the slice. Volumes produced by both voting and statistical fusion algorithms were compared against a set of expert segmentations of the same volumes. Results: Labels for 8825 distinct slices were obtained. Simple majority voting resulted in statistically poorer performance than voting weighted by self-assessed performance

Self-assessed performance improves statistical fusion of image labels

International Nuclear Information System (INIS)

Bryan, Frederick W.; Xu, Zhoubing; Asman, Andrew J.; Allen, Wade M.; Reich, Daniel S.; Landman, Bennett A.

2014-01-01

Purpose: Expert manual labeling is the gold standard for image segmentation, but this process is difficult, time-consuming, and prone to inter-individual differences. While fully automated methods have successfully targeted many anatomies, automated methods have not yet been developed for numerous essential structures (e.g., the internal structure of the spinal cord as seen on magnetic resonance imaging). Collaborative labeling is a new paradigm that offers a robust alternative that may realize both the throughput of automation and the guidance of experts. Yet, distributing manual labeling expertise across individuals and sites introduces potential human factors concerns (e.g., training, software usability) and statistical considerations (e.g., fusion of information, assessment of confidence, bias) that must be further explored. During the labeling process, it is simple to ask raters to self-assess the confidence of their labels, but this is rarely done and has not been previously quantitatively studied. Herein, the authors explore the utility of self-assessment in relation to automated assessment of rater performance in the context of statistical fusion. Methods: The authors conducted a study of 66 volumes manually labeled by 75 minimally trained human raters recruited from the university undergraduate population. Raters were given 15 min of training during which they were shown examples of correct segmentation, and the online segmentation tool was demonstrated. The volumes were labeled 2D slice-wise, and the slices were unordered. A self-assessed quality metric was produced by raters for each slice by marking a confidence bar superimposed on the slice. Volumes produced by both voting and statistical fusion algorithms were compared against a set of expert segmentations of the same volumes. Results: Labels for 8825 distinct slices were obtained. Simple majority voting resulted in statistically poorer performance than voting weighted by self-assessed performance

The Effect of Initial Knee Angle on Concentric-Only Squat Jump Performance

Science.gov (United States)

Mitchell, Lachlan J.; Argus, Christos K.; Taylor, Kristie-Lee; Sheppard, Jeremy M.; Chapman, Dale W.

2017-01-01

Purpose: There is uncertainty as to which knee angle during a squat jump (SJ) produces maximal jump performance. Importantly, understanding this information will aid in determining appropriate ratios for assessment and monitoring of the explosive characteristics of athletes. Method: This study compared SJ performance across different knee…

Assessment of group work in initial teacher education and training

African Journals Online (AJOL)

Participation in courses and seminars on assessment in higher education exposed me to the knowledge of the integrated system in ... knowledge could result in serious challenges in teaching and ..... individuals' performance profile. This can ...

The Western Energy Corridor Initiative: Unconventional Fuel Development Issues, Impacts, and Management Assessment

Science.gov (United States)

Wolfsberg, A.; Hagood, M.; Pasqualini, D.; Wood, T.; Wilson, C.; Witkowski, M.; Levitt, D.; Pawar, R.; Keating, G.; Ziock, H.

2008-12-01

The United States is increasingly dependent on imported oil and gas; commodities for which other nations are competing and for which future supply may be inadequate to support our transportation fuel needs. Therefore, a renewed interest in 'harder-to-get' unconventional fuels has emerged in both industry and government with directed focus on world class hydrocarbon resources within a corridor extending from Canada southward through the Rocky Mountain States. Within this Western Energy Corridor, co-located with significant conventional hydrocarbon and renewable energy resources, lie some of the world's richest unconventional hydrocarbon resources in oil shales, oil sands and coal for coal-to-liquid conversion. However, development of these resources poses substantial environmental concerns as well as increasing competition for limited resources of water and habitat. With large-scale energy development in the predominantly rural region, local communities, infrastructures, and economies will face increasing demands for roads, electricity, law enforcement, labor, and other support services. The Western Energy Corridor Initiative (WECI) seeks to develop an integrated assessment of the impacts of unconventional fuel development, the interrelationships of planned energy developments in different basins, and the resultant demands placed on the region. This initial WECI study focuses on two of the most important current issues for industry, regulators, and stakeholders -- the assessment of carbon and water resources issues, impacts, and management strategies. Through scenario analyses using coupled systems and process level models, this study investigates the viability of integrated development of multiple energy resources in a carbon neutral and environmentally acceptable manner, and the interrelationships of various energy resource development plans. The modeling framework is designed to extend to include infrastructure, employment, training, fiscal and economic demands

Development of models for use in the assessment of waste repository performance

International Nuclear Information System (INIS)

Dickson, A.G.; Weare, J.H.

1989-09-01

The work outlined in this proposal is intended both to provide thermodynamic data that is needed to assist in the assessment of waste repository performance and the modeling necessary to ascertain to what extent the data produced is consistent, both with itself and with other published data on related systems. During this stage of the research we shall endeavor to develop a model of the chemistry of aluminum in aqueous solution which is consistent with a wide variety of experimental data including data generated as part of this project together with data that has been published previously in the research literature. We propose a program of research designed to enable us to model the interaction of canister materials (e.g. copper and iron) with natural waters. Both experimental work and a modeling program are outlined. In the experimental program e.m.f. measurements and spectroscopic measurements will be made so as to determine the various association equilibria of iron and copper with the anions OH-, HCO 3 - , and CO 3 2- . The initial stages of the modeling program will concentrate on the identification and use of existing experimental data to produce a preliminary model. This will allow us to identify those areas where special emphasis should be placed to meet the needs of the waste disposal program objectives. The objective of this research is to produce thermodynamic data for use in the assessment of waste repository performance that has been measured using experimental procedures performed in accord with the Level 1 quality assurance requirements detailed in the L.L.N.L. Yucca Mountain Project Quality Procedures Manual. The modeling approach used in experimental planning and data assessment is a Level 3 activity. In addition to the establishment of the thermodynamic data base proposed here, results should lead to improved consistency in the overall modeling effort. 29 refs., 2 tabs

Assessment of pain experience in adults and children after bracket bonding and initial archwire insertion

Directory of Open Access Journals (Sweden)

Marcio José da Silva Campos

2013-10-01

Full Text Available INTRODUCTION: Ninety five percent of orthodontic patients routinely report pain, due to alterations in the periodontal ligament and surrounding soft tissues, with intensity and prevalence varying according to age. OBJECTIVE: This study aimed to assess toothache and buccal mucosal pain in adults and children during two initial phases of the orthodontic treatment. METHODS: The intensity of toothache and buccal mucosal pain reported by 20 patients, 10 children (11-13 years and 10 adults (18-37 years was recorded with the aid of a Visual Analog Scale (VAS, during 14 days - 7 days with bonded brackets only and 7 days with the initial archwire inserted. RESULTS: There was no significant difference in pain intensity among adults and children. After bracket bonding, 50% of the children and 70% of the adults reported pain. 70% of both groups reported pain after initial archwire insertion. While adults reported constant, low intensity, buccal mucosal pain, the children showed great variation of pain intensity, but with a trend towards decreasing pain during the assessment period. After initial archwire insertion the peaks of toothache intensity and prevalence occurred 24 hours in children and 48 hours in adults. CONCLUSIONS: In general, children reported pain less frequently than adults did, though with greater intensity.

Comment Response on the Final Report: Peer Review of the Total System Performance Assessment-Viability Assessment (TSPA-VA)

International Nuclear Information System (INIS)

Pendleton, M. W.

1999-01-01

The Management and Operating Contractor established a Performance Assessment Peer Review Panel (hereinafter ''the Panel'') at the request of the U.S. Department of Energy Yucca Mountain Site Characterization Office. The objectives of the peer review were to provide: (1) A formal, independent evaluation and critique of Viability Assessment of a Repository at Yucca Mountain: Total System Performance Assessment, Volume 3 (DOE 1998a; hereinafter ''Total System Performance Assessment-Viability Assessment'') that was conducted in support of the Viability Assessment of a Repository at Yucca Mountain (DOE 1998b). (2) Suggestions for improvements as the U.S. Department of Energy prepares to develop the documentation for a Total System Performance Assessment to support a potential License Application. The Panel conducted a phased review over a two-year period to observe the development and, ultimately, to review the Total System Performance Assessment-Viability Assessment (DOE 1998a). During the development of the Total System Performance Assessment-Viability Assessment (DOE 1998a), the Panel submitted three Interim Reports (Whipple et al., 1997a, 1997b, and 1998) to the Management and Operating Contractor with recommendations and comments on the process models, model abstractions, and draft documentation for the Total System Performance Assessment-Viability Assessment (DOE 1998a). The Panel's Final Report Total System Performance Assessment Peer Review Panel (Whipple et al. 1999; hereinafter ''Final Report'') on the Total System Performance Assessment-Viability Assessment (DOE 1998a) is based primarily on the completed Total System Performance Assessment-Viability Assessment (DOE 1998a), the Total System Performance Assessment-Viability Assessment (TSPA-VA) Analyses Technical Basis Document (CRWMS M and O 1998), and the cited references. The Final Report (Whipple et al. 1999) includes the major points from the three Interim Reports (Whipple et al. 1997a, 1997b, and 1998

Workplace-based assessment: raters' performance theories and constructs.

Science.gov (United States)

Govaerts, M J B; Van de Wiel, M W J; Schuwirth, L W T; Van der Vleuten, C P M; Muijtjens, A M M

2013-08-01

Weaknesses in the nature of rater judgments are generally considered to compromise the utility of workplace-based assessment (WBA). In order to gain insight into the underpinnings of rater behaviours, we investigated how raters form impressions of and make judgments on trainee performance. Using theoretical frameworks of social cognition and person perception, we explored raters' implicit performance theories, use of task-specific performance schemas and the formation of person schemas during WBA. We used think-aloud procedures and verbal protocol analysis to investigate schema-based processing by experienced (N = 18) and inexperienced (N = 16) raters (supervisor-raters in general practice residency training). Qualitative data analysis was used to explore schema content and usage. We quantitatively assessed rater idiosyncrasy in the use of performance schemas and we investigated effects of rater expertise on the use of (task-specific) performance schemas. Raters used different schemas in judging trainee performance. We developed a normative performance theory comprising seventeen inter-related performance dimensions. Levels of rater idiosyncrasy were substantial and unrelated to rater expertise. Experienced raters made significantly more use of task-specific performance schemas compared to inexperienced raters, suggesting more differentiated performance schemas in experienced raters. Most raters started to develop person schemas the moment they began to observe trainee performance. The findings further our understanding of processes underpinning judgment and decision making in WBA. Raters make and justify judgments based on personal theories and performance constructs. Raters' information processing seems to be affected by differences in rater expertise. The results of this study can help to improve rater training, the design of assessment instruments and decision making in WBA.

Functional Performance and Associations between Performance Tests and Neurological Assessment Differ in Men and Women with Parkinson's Disease.

Science.gov (United States)

Medijainen, Kadri; Pääsuke, Mati; Lukmann, Aet; Taba, Pille

2015-01-01

Neurological assessment of a patient with Parkinson's disease (PD) is expected to reflect upon functional performance. As women are known to report more limitations even for same observed functional performance level, present study was designed to examine whether associations between neurological assessments and functional performance differ across genders. 14 men and 14 women with PD participated. Functional performance was assessed by measuring walking speeds on 10-meter walk test (10MWT) and by performing timed-up-and-go-test (TUG). Neurological assessment included Hoehn and Yahr Scale (HY), Movement Disorders Society Unified Parkinson's Disease Rating Scale (MDS-UPDRS), Schwab and England Activities of Daily Living Scale (S-E), and Mini Mental State Examination (MMSE). In women with PD, Kendall's tau-b correlation analyses revealed significant correlations between functional performance tests and neurological assessment measures, with the exception in MMSE. No corresponding associations were found for men, although they demonstrated better functional performance, as expected. Men in similar clinical stage of the PD perform better on functional tests than women. Disease severity reflects upon functional performance differently in men and women with PD. Results indicate that when interpreting the assessment results of both functional performance and neurological assessment tests, the gender of the patient should be taken into consideration.

Physician Performance Assessment: Prevention of Cardiovascular Disease

Science.gov (United States)

Lipner, Rebecca S.; Weng, Weifeng; Caverzagie, Kelly J.; Hess, Brian J.

2013-01-01

Given the rising burden of healthcare costs, both patients and healthcare purchasers are interested in discerning which physicians deliver quality care. We proposed a methodology to assess physician clinical performance in preventive cardiology care, and determined a benchmark for minimally acceptable performance. We used data on eight…

Radioactive Waste Management Complex performance assessment: Draft

Energy Technology Data Exchange (ETDEWEB)

Case, M.J.; Maheras, S.J.; McKenzie-Carter, M.A.; Sussman, M.E.; Voilleque, P.

1990-06-01

A radiological performance assessment of the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory was conducted to demonstrate compliance with appropriate radiological criteria of the US Department of Energy and the US Environmental Protection Agency for protection of the general public. The calculations involved modeling the transport of radionuclides from buried waste, to surface soil and subsurface media, and eventually to members of the general public via air, ground water, and food chain pathways. Projections of doses were made for both offsite receptors and individuals intruding onto the site after closure. In addition, uncertainty analyses were performed. Results of calculations made using nominal data indicate that the radiological doses will be below appropriate radiological criteria throughout operations and after closure of the facility. Recommendations were made for future performance assessment calculations.

Radioactive Waste Management Complex performance assessment: Draft

International Nuclear Information System (INIS)

Case, M.J.; Maheras, S.J.; McKenzie-Carter, M.A.; Sussman, M.E.; Voilleque, P.

1990-06-01

A radiological performance assessment of the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory was conducted to demonstrate compliance with appropriate radiological criteria of the US Department of Energy and the US Environmental Protection Agency for protection of the general public. The calculations involved modeling the transport of radionuclides from buried waste, to surface soil and subsurface media, and eventually to members of the general public via air, ground water, and food chain pathways. Projections of doses were made for both offsite receptors and individuals intruding onto the site after closure. In addition, uncertainty analyses were performed. Results of calculations made using nominal data indicate that the radiological doses will be below appropriate radiological criteria throughout operations and after closure of the facility. Recommendations were made for future performance assessment calculations

Melt spreading code assessment, modifications, and initial application to the EPR core catcher design

International Nuclear Information System (INIS)

Farmer, M.T.; Basu, S.

2009-01-01

The Evolutionary Power Reactor (EPR) is a 1,600-MWe Pressurized Water Reactor (PWR) that is undergoing a design certification review by the U.S. Nuclear Regulatory Commission (NRC). The EPR severe accident design philosophy is predicated upon the fact that the projected power rating results in a narrow margin for in-vessel melt retention by external flooding. As a result, the design addresses ex-vessel core melt stabilization using a mitigation strategy that includes: 1) an external core melt retention system to temporarily hold core melt released from the vessel; 2) a layer of 'sacrificial' material that is admixed with the melt while in the core melt retention system; 3) a melt plug that, when failed, provides a pathway for the mixture to spread to a large core spreading chamber; and finally, 4) cooling and stabilization of the spread melt by controlled top and bottom flooding. The melt spreading process relies heavily on inertial flow of a low-viscosity admixed melt to a segmented spreading chamber, and assumes that the melt mass will be distributed to a uniform height in the chamber. The spreading phenomenon thus needs to be modeled properly in order to adequately assess the EPR design. The MELTSPREAD code, developed at Argonne National Laboratory, can model segmented, and both uniform and non-uniform spreading. The NRC is using MELTSPREAD to evaluate melt spreading in the EPR design. The development of MELTSPREAD ceased in the early 1990's, and so the code was first assessed against the more contemporary spreading database and code modifications, as warranted, were carried out before performing confirmatory plant calculations. This paper provides principle findings from the MELTSPREAD assessment activities and resulting code modifications, and also summarizes the results of initial scoping calculations for the EPR plant design and preliminary plant analyses, along with the plan for performing the final set of plant calculations including sensitivity studies

Self- and peer-assessments of ambulance drivers' driving performance

Directory of Open Access Journals (Sweden)

Anna Sundström

2012-07-01

Full Text Available The aim of the present study was to develop and examine the quality of the Ambulance Driver Self-assessment Questionnaire (ADSQ and the Ambulance Driver Peer-assessment Questionnaire (ADPQ measuring aspects of, driving performance, driving style and driving competence. In addition the ADSQ measures self-reflection and safety-attitudes. The aim of the study was also to examine ambulance drivers' self- and peer-assessments as well as to examine the accuracy of self-assessments by comparing self-assessed and peer-assessed driving performance, driving style and competence. 76 ambulance drivers employed at two ambulance stations in northern Sweden completed ADSQ and ADPQ. Item analyses were conducted to examine the psychometric properties of the items, and based on the results some revisions were made to improve the questionnaires. The revised questionnaires were functioning rather well, although some subscale demonstrated low internal consistency. Subscale inter-correlations provided support for construct validity. Self- and peer-assessments indicated safe driving performance and good driver competence, which is positive from a traffic safety perspective. A comparison of mean self- and peer-assessment ratings, controlling for age, gender and driving experience showed no significant differences, except for the subscale overtaking. This indicates that ambulance drivers' self-assessments are realistic in most areas.

Initial thoracic involvement in lymphoma. CT assessment

International Nuclear Information System (INIS)

Bustos, A.; Corredoira, J.; Ferreiros, J.; Cabeza, B.; Jorquera, M.; Pedrosa, I.; Martinez, R.; Fernandez, C.

2002-01-01

To analyze the initial thoracic involvement by CT in a consecutive series of patients with lymphoma. A retrospective analysis was made of thoracic CT studies made at the time of diagnosis of 259 patients with lymphoma. Mediastinal pulmonary, pleural, pericardial and chest wall involvement was assessed by CT. Of 259 patients (129 men y 130 women), 56 had Hodgkin's disease (HD) and 203 had non-Hodgkin lymphoma (NHL). Forty-two percent (42.5%, 110/259) of the patients had chest involvement on CT: 33 of 56 patients with HD (58.9%) and 77 of 203 patients with NHL (37.9%). All the patients with thoracic HD) and 71.4% of patients with thoracic NHL, had mediastinal lymph node involvement. of the patients with thoracic involvement 12.1% (4/33) of the patient with HD and 23.3% (18/77) of the patients with NHL had pulmonary involvement. Thoracic involvement on CT was more frequent in HD. Mediastinal lymph node involvement was the most common finding fundamentally in HD. Pulmonary disease always occurred in the presence of mediastinal lymph node involvement in HD but could occur as an isolated finding in NHL. (Author) 24 refs

Performance assessment for future low-level waste disposal facilities at ORNL

International Nuclear Information System (INIS)

Lee, D.W.; Kocher, D.C.

1989-01-01

This paper discusses the strategy for waste management on the Oak Ridge Reservation (ORR) and the approach to preparing future performance assessments that has evolved from previous performance assessment studies of low-level radioactive waste disposal on the ORR. The strategy for waste management is based on the concept that waste classification should be determined by performance assessment other than the sources of waste. This dose-based strategy for waste classification and management places special importance on the preparation and interpretation of waste disposal performance assessments for selecting appropriate disposal technologies and developing waste acceptance criteria. Additionally, the challenges to be overcome in the preparation of performance assessments are discussed. 7 refs

Development of the Indigenous Child-Initiated Pretend Play Assessment: Selection of play materials and administration.

Science.gov (United States)

Dender, Alma; Stagnitti, Karen

2011-02-01

There is a need for culturally appropriate assessments for Australian Indigenous children. This article reports the selection of culturally appropriate and gender-neutral play materials, and changes in administration identified to develop further the Indigenous Child-Initiated Pretend Play Assessment (I-ChIPPA). Twenty-three typically developing children aged four to six years from the Pilbara region in Western Australia participated in the study. Children were presented with four sets of play materials and frequency counts were recorded for each time the child used one of the play materials in a pretend play action. Twelve of the 23 children came to play in pairs. Both boys and girls used the Pilbara toy set including the dark coloured dolls and Pilbara region animals, more frequently than the standardised play materials from the Child-Initiated Pretend Play Assessment (ChIPPA). This study reports the first steps in the development of the I-ChIPPA. Future development will include the refinement of the administration and scoring with pairs of children, and then validity testing the assessment. © 2010 The Authors. Australian Occupational Therapy Journal © 2010 Australian Association of Occupational Therapists.

Machine performance assessment and enhancement for a hexapod machine

Energy Technology Data Exchange (ETDEWEB)

Mou, J.I. [Arizona State Univ., Tempe, AZ (United States); King, C. [Sandia National Labs., Livermore, CA (United States). Integrated Manufacturing Systems Center

1998-03-19

The focus of this study is to develop a sensor fused process modeling and control methodology to model, assess, and then enhance the performance of a hexapod machine for precision product realization. Deterministic modeling technique was used to derive models for machine performance assessment and enhancement. Sensor fusion methodology was adopted to identify the parameters of the derived models. Empirical models and computational algorithms were also derived and implemented to model, assess, and then enhance the machine performance. The developed sensor fusion algorithms can be implemented on a PC-based open architecture controller to receive information from various sensors, assess the status of the process, determine the proper action, and deliver the command to actuators for task execution. This will enhance a hexapod machine`s capability to produce workpieces within the imposed dimensional tolerances.

Initial Readability Assessment of Clinical Trial Eligibility Criteria

Science.gov (United States)

Kang, Tian; Elhadad, Noémie; Weng, Chunhua

2015-01-01

Various search engines are available to clinical trial seekers. However, it remains unknown how comprehensible clinical trial eligibility criteria used for recruitment are to a lay audience. This study initially investigated this problem. Readability of eligibility criteria was assessed according to (i) shallow and lexical characteristics through the use of an established, generic readability metric; (ii) syntactic characteristics through natural language processing techniques; and (iii) health terminological characteristics through an automated comparison to technical and lay health texts. We further stratified clinical trials according to various study characteristics (e.g., source country or study type) to understand potential factors influencing readability. Mainly caused by frequent use of technical jargons, a college reading level was found to be necessary to understand eligibility criteria text, a level much higher than the average literacy level of the general American population. The use of technical jargons should be minimized to simplify eligibility criteria text. PMID:26958204

Exploring the relationship between job quality, performance management, and career initiative : A two-level, two-actor study

NARCIS (Netherlands)

van Veldhoven, M.J.P.M.; Dorenbosch, L; Breugelmans, A; van de Voorde, F.C.

2017-01-01

This study examines how job quality and performance management influence career initiative in the workplace. Based on signaling theory and the notion of internal fit in performance management and HRM, we argue that performance management with a learning orientation further enhances career

The Waste Isolation Pilot Plant Performance Assessment Program

International Nuclear Information System (INIS)

Myers, J.; Coons, W.E.; Eastmond, R.; Morse, J.; Chakrabarti, S.; Zurkoff, J.; Colton, I.D.; Banz, I.

1986-01-01

The Waste Isolation Pilot Plant (WIPP) Performance Assessment Program involves a comprehensive analysis of the WIPP project with respect to the recently finalized Environmental Protection Agency regulations regarding the long-term geologic isolation of radioactive wastes. The performance assessment brings together the results of site characterization, underground experimental, and environmental studies into a rigorous determination of the performance of WIPP as a disposal system for transuranic radioactive waste. The Program consists of scenario development, geochemical, hydrologic, and thermomechanical support analyses and will address the specific containment and individual protection requirements specified in 40 CFR 191 sub-part B. Calculated releases from these interrelated analyses will be reported as an overall probability distribution of cumulative release resulting from all processes and events occurring over the 10,000 year post-closure period. In addition, results will include any doses to the public resulting from natural processes occurring over the 1,000 year post-closure period. The overall plan for the WIPP Performance Assessment Program is presented along with approaches to issues specific to the WIPP project

Distance Learning Can Be as Effective as Traditional Learning for Medical Students in the Initial Assessment of Trauma Patients

Directory of Open Access Journals (Sweden)

Shervin Farahmand

2016-10-01

Full Text Available Distance learning is expanding and replacing the traditional academic medical settings. Managing trauma patients seems to be a prerequisite skill for medical students. This study has been done to evaluate the efficiency of distance learning on performing the initial assessment and management in trauma patients, compared with the traditional learning among senior medical students. One hundred and twenty senior medical students enrolled in this single-blind quasi-experimental study and were equally divided into the experimental (distance learning and control group (traditional learning. All participants did a written MCQ before the study. The control group attended a workshop with a 50-minute lecture on initial management of trauma patients and a case simulation scenario followed by a hands-on session. On the other hand, the experimental group was given a DVD with a similar 50-minute lecture and a case simulation scenario, and they also attended a hands-on session to practice the skills. Both groups were evaluated by a trauma station in an objective structured clinical examination (OSCE after a month. The performance in the experimental group was statistically better (P=0.001 in OSCE. Distance learning seems to be an appropriate adjunct to traditional learning.

Risk Assessment supporting the decision on the initial selection of supplemental ILAW technologies

Energy Technology Data Exchange (ETDEWEB)

MANN, F. M.

2003-09-29

A risk assessment on the long-term environmental impact of various potential waste forms was conducted at the request of the Hanford Site's Mission Acceleration Initiative Team. These potential waste forms (bulk vitrification, cast stone, and steam reformer) may treat some of the low-activity waste currently planned to be treated at the Waste Treatment Plant.

Performance objectives for the Hanford immobilized low-activity waste (ILAW) performance assessment

International Nuclear Information System (INIS)

MANN, F.M.

1999-01-01

Before low-level waste may be disposed of, a performance assessment must be written and then approved by the DOE (DOE 1988a, DOE 1999a). The performance assessment is to determine whether ''reasonable assurance'' exists that the performance objectives of the disposal facility will be met. The DOE requirements for waste disposal (DOE 1988a, DOE 1999a) require (see Appendix B): The protection of public health and safety; and The protection of the environment. Although quantitative limits are sometimes stated (for example, the all-pathways exposure limit is 25 mredyear), usually the requirements are stated in a general nature. Quantitative limits were established by: investigating all potentially applicable regulations as well as interpretations of the review panels which DOE has established to review performance assessments; interacting with program management to establish the additional requirements of the program; and interacting with the public (i.e., the Hanford Advisory Board members; as well as affected Tribal Governments) to understand the values of residents in the Pacific Northwest. Because of space considerations, not all radionuclides and dangerous chemicals are listed in this document. The radionuclides listed here are those which were explicitly treated in the ILAW PA (Mann 1998). The dangerous chemicals listed here are those most often detected in Hanford tank waste as documented in the Regulatory Data Quality Objectives Supporting Tank Waste Remediation System Privatization Project (Wiemers 1998)

Defining molecular initiating events in the adverse outcome pathway framework for risk assessment.

Science.gov (United States)

Allen, Timothy E H; Goodman, Jonathan M; Gutsell, Steve; Russell, Paul J

2014-12-15

Consumer and environmental safety decisions are based on exposure and hazard data, interpreted using risk assessment approaches. The adverse outcome pathway (AOP) conceptual framework has been presented as a logical sequence of events or processes within biological systems which can be used to understand adverse effects and refine current risk assessment practices in ecotoxicology. This framework can also be applied to human toxicology and is explored on the basis of investigating the molecular initiating events (MIEs) of compounds. The precise definition of the MIE has yet to reach general acceptance. In this work we present a unified MIE definition: an MIE is the initial interaction between a molecule and a biomolecule or biosystem that can be causally linked to an outcome via a pathway. Case studies are presented, and issues with current definitions are addressed. With the development of a unified MIE definition, the field can look toward defining, classifying, and characterizing more MIEs and using knowledge of the chemistry of these processes to aid AOP research and toxicity risk assessment. We also present the role of MIE research in the development of in vitro and in silico toxicology and suggest how, by using a combination of biological and chemical approaches, MIEs can be identified and characterized despite a lack of detailed reports, even for some of the most studied molecules in toxicology.

The Self-Assessment Process and Impacts on the Health Information Management Program Performance: A Case Study

Science.gov (United States)

Spohn, Renae

2015-01-01

This study examined how health information management (HIM) educational programs can use the Malcolm Baldrige National Quality Award Model (MBNQAM) educational criteria to meet the self-assessment requirement for Commission on Accreditation for Health Informatics and Information Management Education (CAHIIM) accreditation. An existing instrument, Quantum Performance Group's Organizational Assessment Survey authored by Dr. Mark Blazey, was used in this study. The instrument was designed to self-assess the entire organization. Results of the study demonstrate how the MBNQAM can be used to successfully self-assess HIM programs. This research adds to the body of literature surrounding the application of the MBNQAM for HIM programs and provides new information to deans, administrators, and educators that may be useful, as an added component, when self-assessing HIM programs. The results of this study will help to establish a foundation for HIM programs to strengthen the self-assessment process, providing a strong starting point for strategic planning prioritization for HIM program improvement initiatives. The improved process will help in maturing the HIM program while fulfilling accreditation requirements for self-assessment. As additional HIM programs formalize the self-assessment process, benchmarking opportunities with other HIM programs will be created. PMID:26755899

Activities of NASA's Global Modeling Initiative (GMI) in the Assessment of Subsonic Aircraft Impact

Science.gov (United States)

Rodriquez, J. M.; Logan, J. A.; Rotman, D. A.; Bergmann, D. J.; Baughcum, S. L.; Friedl, R. R.; Anderson, D. E.

2004-01-01

The Intergovernmental Panel on Climate Change estimated a peak increase in ozone ranging from 7-12 ppbv (zonal and annual average, and relative to a baseline with no aircraft), due to the subsonic aircraft in the year 2015, corresponding to aircraft emissions of 1.3 TgN/year. This range of values presumably reflects differences in model input (e.g., chemical mechanism, ground emission fluxes, and meteorological fields), and algorithms. The model implemented by the Global Modeling Initiative allows testing the impact of individual model components on the assessment calculations. We present results of the impact of doubling the 1995 aircraft emissions of NOx, corresponding to an extra 0.56 TgN/year, utilizing meteorological data from NASA's Data Assimilation Office (DAO), the Goddard Institute for Space Studies (GISS), and the Middle Atmosphere Community Climate Model, version 3 (MACCM3). Comparison of results to observations can be used to assess the model performance. Peak ozone perturbations ranging from 1.7 to 2.2 ppbv of ozone are calculated using the different fields. These correspond to increases in total tropospheric ozone ranging from 3.3 to 4.1 Tg/Os. These perturbations are consistent with the IPCC results, due to the difference in aircraft emissions. However, the range of values calculated is much smaller than in IPCC.

RECREATION MONITORING OF RESOURCE CONDITIONS IN THE KRONOTSKY STATE NATURAL BIOSPHERE PRESERVE (KAMCHATKA: AN INITIAL ASSESSMENT

Directory of Open Access Journals (Sweden)

Anna Zavadskaya

2011-01-01

Full Text Available The paper describes assessment and monitoring program which has been designed and initiated for monitoring recreational impacts in some wildernesses areas of Kamchatka. The framework of the recreational assessment was tested through its application in a case study conducted during the summer 2008 in the Kronotsky State Natural Biosphere Preserve (the Kamchatka peninsula, Russia. The overall objective of the case study was to assess the existing campsite and trail recreation impacts and to establish a network of key sites for the subsequent long-term impact monitoring. The detailed assessment of different components of natural complexes of the Kronotsky State Natural Preserve and the obtained maps of their ecological conditions showed that some sites had been highly disturbed. The results of these works have given rise to a concern that the intensive use of these areas would make an unacceptable impact on the nature. Findings of our initial work corroborate the importance of founding wilderness management programs on knowledge about the trail and campsite impacts and emphasize the necessity of adopting the recreational assessment and monitoring framework to the practice of decision-making.

Low-level waste disposal performance assessments - Total source-term analysis

Energy Technology Data Exchange (ETDEWEB)

Wilhite, E.L.

1995-12-31

Disposal of low-level radioactive waste at Department of Energy (DOE) facilities is regulated by DOE. DOE Order 5820.2A establishes policies, guidelines, and minimum requirements for managing radioactive waste. Requirements for disposal of low-level waste emplaced after September 1988 include providing reasonable assurance of meeting stated performance objectives by completing a radiological performance assessment. Recently, the Defense Nuclear Facilities Safety Board issued Recommendation 94-2, {open_quotes}Conformance with Safety Standards at Department of Energy Low-Level Nuclear Waste and Disposal Sites.{close_quotes} One of the elements of the recommendation is that low-level waste performance assessments do not include the entire source term because low-level waste emplaced prior to September 1988, as well as other DOE sources of radioactivity in the ground, are excluded. DOE has developed and issued guidance for preliminary assessments of the impact of including the total source term in performance assessments. This paper will present issues resulting from the inclusion of all DOE sources of radioactivity in performance assessments of low-level waste disposal facilities.

42 CFR 418.54 - Condition of participation: Initial and comprehensive assessment of the patient.

Science.gov (United States)

2010-10-01

... patient's well-being, comfort, and dignity throughout the dying process. The comprehensive assessment must... and participate in his or her own care. (4) Imminence of death. (5) Severity of symptoms. (6) Drug... their ability to cope with the patient's death. Information gathered from the initial bereavement...

Methodology for assessing performance of waste management systems

International Nuclear Information System (INIS)

Meshkov, N.K.; Herzenberg, C.L.; Camasta, S.F.

1988-01-01

The newly revised draft DOE Order 5820.2, Chapter 3, requires that DOE low-level waste shall be managed on a systematic basis using the most appropriate combination of waste generation reduction, segregation, treatment, and disposal practices so that the radioactive components are contained and the overall cost effectiveness is minimized. This order expects each site to prepare and maintain an overall waste management systems performance assessment supporting the combination of waste management practices used in generation reduction segregation, treatment, packaging, storage, and disposal. A document prepared by EG and G Idaho, Inc. for the Department of Energy called Guidance for Conduct of Waste Management Systems Performance Assessment is specifically intended to provide the approach necessary to meet the systems performance assessment requirement of DOE Order 5820.2, Chapter 3, and other applicable state regulations dealing with LLW (low-level radioactive wastes). Methods and procedures are needed for assessing the performance of a waste management system. This report addresses this need. The purpose of the methodology provided in this report is to select the optimal way to manage particular sets of waste streams from generation to disposal in a safe and cost-effective manner, and thereby assist the DOE LLW mangers in complying with the DOE Order 5820.2, Chapter 3, and the associated guidance document

Myanmar Transport Sector Initial Assessment

OpenAIRE

Asian Development Bank (ADB)

2012-01-01

The Asian Development Bank (ADB) is preparing sector assessments to help align future ADB support with the needs and strategies of developing member countries and other development partners. The assessment is a working document that helps inform the development of country partnership strategies. This transport sector assessment highlights development issues, needs, and strategic assistance priorities of the Government of the Republic of the Union of Myanmar and ADB, with a focus on rail, road...

Health technology assessment to optimize health technology utilization: using implementation initiatives and monitoring processes.

Science.gov (United States)

Frønsdal, Katrine B; Facey, Karen; Klemp, Marianne; Norderhaug, Inger Natvig; Mørland, Berit; Røttingen, John-Arne

2010-07-01

The way in which a health technology is used in any particular health system depends on the decisions and actions of a variety of stakeholders, the local culture, and context. In 2009, the HTAi Policy Forum considered how health technology assessment (HTA) could be improved to optimize the use of technologies (in terms of uptake, change in use, or disinvestment) in such complex systems. In scoping, it was agreed to focus on initiatives to implement evidence-based guidance and monitoring activities. A review identified systematic reviews of implementation initiatives and monitoring activities. A two-day deliberative workshop was held to discuss key papers, members' experiences, and collectively address key questions. This consensus paper was developed by email and finalized at a postworkshop meeting. Evidence suggests that the impact and use of HTA could be increased by ensuring timely delivery of relevant reports to clearly determined policy receptor (decision-making) points. To achieve this, the breadth of assessment, implementation initiatives such as incentives and targeted, intelligent dissemination of HTA result, needs to be considered. HTA stakeholders undertake a variety of monitoring activities, which could inform optimal use of a technology. However, the quality of these data varies and is often not submitted to an HTA. Monitoring data should be sufficiently robust so that they can be used in HTA to inform optimal use of technology. Evidence-based implementation initiatives should be developed for HTA, to better inform decision makers at all levels in a health system about the optimal use of technology.

Performance Standards': Utility for Different Uses of Assessments

Directory of Open Access Journals (Sweden)

Robert L. Linn

2003-09-01

Full Text Available Performance standards are arguably one of the most controversial topics in educational measurement. There are uses of assessments such as licensure and certification where performance standards are essential. There are many other uses, however, where performance standards have been mandated or become the preferred method of reporting assessment results where the standards are not essential to the use. Distinctions between essential and nonessential uses of performance standards are discussed. It is argued that the insistence on reporting in terms of performance standards in situations where they are not essential has been more harmful than helpful. Variability in the definitions of proficient academic achievement by states for purposes of the No Child Left Behind Act of 2001 is discussed and it is argued that the variability is so great that characterizing achievement is meaningless. Illustrations of the great uncertainty in standards are provided.

Web-based application on employee performance assessment using exponential comparison method

Science.gov (United States)

Maryana, S.; Kurnia, E.; Ruyani, A.

2017-02-01

Employee performance assessment is also called a performance review, performance evaluation, or assessment of employees, is an effort to assess the achievements of staffing performance with the aim to increase productivity of employees and companies. This application helps in the assessment of employee performance using five criteria: Presence, Quality of Work, Quantity of Work, Discipline, and Teamwork. The system uses the Exponential Comparative Method and Weighting Eckenrode. Calculation results using graphs were provided to see the assessment of each employee. Programming language used in this system is written in Notepad++ and MySQL database. The testing result on the system can be concluded that this application is correspond with the design and running properly. The test conducted is structural test, functional test, and validation, sensitivity analysis, and SUMI testing.

Human performance assessment: methods and measures

International Nuclear Information System (INIS)

Andresen, Gisle; Droeivoldsmo, Asgeir

2000-10-01

The Human Error Analysis Project (HEAP) was initiated in 1994. The aim of the project was to acquire insights on how and why cognitive errors occur when operators are engaged in problem solving in advanced integrated control rooms. Since human error had not been studied in the HAlden Man-Machine LABoratory (HAMMLAB) before, it was also necessary to carry out research in methodology. In retrospect, it is clear that much of the methodological work is relevant to human-machine research in general, and not only to research on human error. The purpose of this report is, therefore, to give practitioners and researchers an overview of the methodological parts of HEAP. The scope of the report is limited to methods used throughout the data acquisition process, i.e., data-collection methods, data-refinement methods, and measurement methods. The data-collection methods include various types of verbal protocols, simulator logs, questionnaires, and interviews. Data-refinement methods involve different applications of the Eyecon system, a flexible data-refinement tool, and small computer programs used for rearranging, reformatting, and aggregating raw-data. Measurement methods involve assessment of diagnostic behaviour, erroneous actions, complexity, task/system performance, situation awareness, and workload. The report concludes that the data-collection methods are generally both reliable and efficient. The data-refinement methods, however, should be easier to use in order to facilitate explorative analyses. Although the series of experiments provided an opportunity for measurement validation, there are still uncertainties connected to several measures, due to their reliability still being unknown. (Author). 58 refs.,7 tabs

Survey and review of near-field performance assessment

International Nuclear Information System (INIS)

Apted, M.J.

1993-01-01

The aim of this chapter is to describe the performance assessment (PA) context in which near-field models have been developed and applied. An overview is given of a number of PA studies. Although the focus is on near-field models, the overview covers the full context in which the PAs have been performed, including the purpose of the studies and regulatory context. Special emphasis has been given to the scenarios analyzed in the assessments; the scenarios set the framework for model development and application. Another aspect to consider in a study of near-field modeling from the perspective of total PA is the linking between near-field and far-field assessment. (R.P.) 6 tabs

Measuring quality in health care and its implications for pay-for-performance initiatives.

Science.gov (United States)

Chung, Kevin C; Shauver, Melissa J

2009-02-01

The quality of health care is important to American consumers, and discussion on quality will be a driving force toward improving the delivery of health care in America. Funding agencies are proposing a variety of quality measures, such as centers of excellence, pay-for-participation, and pay-for-performance initiatives, to overhaul the health care delivery system in this country. It is quite uncertain, however, whether these quality initiatives will succeed in curbing the unchecked growth in health care spending in this country, and physicians understandably are concerned about more intrusion into the practice of medicine. This article outlines the genesis of the quality movement and discusses its effect on the surgical community.

5th Total System Performance Assessment Workshop

International Nuclear Information System (INIS)

Hwang, Yong Soo; Lee, Youn Myoung; Kang, Chul Hyung; Lee, Sung Ho

2009-07-01

Research items on safety assessment of high-level waste repository have been proposed by external invited experts outside KAERI and discussed extensively during the annual 5th performance assessment workshop prepared by safety assessment group in KAERI. This could be useful to set up R and D plans necessary for the next phase of mid- and long-term reaserch area regarding the safety assessment of high-level waste repository. Through the research and the presentation, HLW-related research and development area including such specific research items as current status of HLW safety assessment research, current requirement for the licensing of the repository system, priority on research area, data base building for the safety assessment, source-term modeling as well as safety case, among many others, have been discussed and summarized

Development of self and peer performance assessment on iodometric titration experiment

Science.gov (United States)

Nahadi; Siswaningsih, W.; Kusumaningtyas, H.

2018-05-01

This study aims to describe the process in developing of reliable and valid assessment to measure students’ performance on iodometric titration and the effect of the self and peer assessment on students’ performance. The self and peer-instrument provides valuable feedback for the student performance improvement. The developed assessment contains rubric and task for facilitating self and peer assessment. The participants are 24 students at the second-grade student in certain vocational high school in Bandung. The participants divided into two groups. The first 12 students involved in the validity test of the developed assessment, while the remain 12 students participated for the reliability test. The content validity was evaluated based on the judgment experts. Test result of content validity based on judgment expert show that the developed performance assessment instrument categorized as valid on each task with the realibity classified as very good. Analysis of the impact of the self and peer assessment implementation showed that the peer instrument supported the self assessment.

Performance Assessment of a Low-Level Radioactive Waste Disposal Site using GoldSim Integrated Systems Model

Science.gov (United States)

Merrell, G.; Singh, A.; Tauxe, J.; Perona, R.; Dornsife, W.; grisak, G. E.; Holt, R. M.

2011-12-01

Texas Commission on Environmental Quality has approved licenses for four landfills at the Waste Control Specialists (WCS) site located in Andrews County, West Texas. The site includes a hazardous waste landfill and three landfills for radioactive waste. An updated performance assessment is necessary prior to acceptance of waste at the landfills. The updated performance assessment a) provides for more realistic and flexible dose modeling capabilities, b) addresses all plausible release and accident scenarios as they relate to the performance objectives, c) includes impact of climate and hydrologic scenarios that may impact long-term performance of the landfill, d) addresses impact of cover naturalization and degradation on the landfill, and e) incorporates uncertainty and sensitivity analysis for critical parameters. For the updated performance assessment, WCS has developed an integrated systems level performance assessment model using the GoldSim platform. GoldSim serves as a model for integrating all of the major components of a performance assessment, which include the radionuclide source term, facility design, environmental transport pathways, exposure scenarios, and radiological doses. Unlike many computer models that are based on first principles, GoldSim is a systems level model that can be used to integrate and abstract more complex sub-models into one system. This can then be used to assess the results into a unified model of the disposal system and environment. In this particular application, the GoldSim model consists of a) hydrogeologic model that simulates flow and transport through the Dockum geologic unit that underlies all of the waste facilities, b) waste cells that represent the containment unit and simulate degradation of waste forms, radionuclide leaching, and partitioning into the liquid and vapor phase within the waste unit, c) a cover system model that simulates upward diffusive transport from the underground repository to the atmosphere. In

Feedback from performance assessment to site characterisation. The SITE-94 example

International Nuclear Information System (INIS)

Dverstorp, B.; Geier, J.

1999-01-01

Interaction and information exchange between site characterisation and performance assessment are key features of any successful radioactive waste management programme. Some examples are presented of the types of feedback that can be offered from performance assessment to site characterisation, based on SKI's most recent performance assessment project, SITE-94. SITE-94 in Sweden was an assessment of a hypothetical repository for spent nuclear fuel, based on real data gathered in the surface-based investigation of the Aespoe Hard Rock Laboratory site. Examples of feedback are given concerning quality control of data and site investigation procedures, identification of key parameters for the performance assessment, use of models for planning and evaluation of a site investigation, data sampling strategies, and guidance on future priorities for further development of site investigation methods. Because site characterisation serves multiple purposes, including provision of data for repository design and construction, it must account for and compromise among requirements from several lines of analyses in the performance assessment. (author)

Statistical analysis in MSW collection performance assessment.

Science.gov (United States)

Teixeira, Carlos Afonso; Avelino, Catarina; Ferreira, Fátima; Bentes, Isabel

2014-09-01

The increase of Municipal Solid Waste (MSW) generated over the last years forces waste managers pursuing more effective collection schemes, technically viable, environmentally effective and economically sustainable. The assessment of MSW services using performance indicators plays a crucial role for improving service quality. In this work, we focus on the relevance of regular system monitoring as a service assessment tool. In particular, we select and test a core-set of MSW collection performance indicators (effective collection distance, effective collection time and effective fuel consumption) that highlights collection system strengths and weaknesses and supports pro-active management decision-making and strategic planning. A statistical analysis was conducted with data collected in mixed collection system of Oporto Municipality, Portugal, during one year, a week per month. This analysis provides collection circuits' operational assessment and supports effective short-term municipality collection strategies at the level of, e.g., collection frequency and timetables, and type of containers. Copyright © 2014 Elsevier Ltd. All rights reserved.

The ATLAS Muon Trigger Performance : Run 1 and initial Run 2.

CERN Document Server

Kasahara, Kota; The ATLAS collaboration

2015-01-01

The ATLAS Muon Trigger Performance: Run 1 and Initial Run 2 Performance

Events with muons in the final state are an important signature for many physics topics at the Large Hadron Collider (LHC). An efficient trigger on muons and a detailed understanding of its performance are required. In 2012, the last year of Run 1, the instantaneous luminosity of the LHC reached 7.7x10^33 cm -2s-1 and the average number of events that occur in a same bunch crossing was 25. The ATLAS Muon trigger has successfully adapted to this changing environment by making use of isolation requirements, combined trigger signatures with electron and jet trigger objects, and by using so-called full-scan triggers, which make use of the full event information to search for di-lepton signatures, seeded by single lepton objects. A stable and highly efficient muon trigger was vital in the discovery of Higgs boson in 2012 and for many searches for new physics. 
The performance of muon triggers during the LHC Run 1 data-taking campaigns i...

Assessment of Innovation and Performance in the Fruit Chain; The Innovation-Performance Matrix

NARCIS (Netherlands)

Trienekens, J.H.; Uffelen, van R.L.M.; Debaire, J.; Omta, S.W.F.

2008-01-01

Purpose - This paper aims to bridge the concepts of innovation and performance and to develop a framework to assess innovation and performance in food chains. Design/methodology/approach - Based on an extensive literature search the paper identifies critical success factors (CSFs) and related

Initial development of the Psychopathic Processing and Personality Assessment (PAPA) across populations.

Science.gov (United States)

Lewis, Michael; Ireland, Jane L; Abbott, Janice; Ireland, Carol A

Three studies describe development of the Psychopathic Processing and Personality Assessment (PAPA). Study one outlines a literature review and Expert Delphi (n=32) to develop the initial PAPA. Study two validates the PAPA with 431 participants (121 male prisoners and 310 university students: 154 men, 156 women), also using the Levenson Self Report Psychopathy scale and a measure of cognitive schema and affect. Study three refined the PAPA, employing it with 50 male students and 40 male forensic psychiatric patients using clinical (interview) assessments of psychopathy: the Psychopathy Checklist - Screening Version and the Affect, Cognitive and Lifestyle assessment. The PAPA comprised four factors; dissocial tendencies; emotional detachment; disregard for others; and lack of sensitivity to emotion. It positively correlated with existing psychopathy measures. Variations across PAPA subscales were noted across samples when associated with clinical measures of psychopathy. Support for the validity of the PAPA was indicated across samples. Directions for research and application are outlined. Copyright © 2017 Elsevier Ltd. All rights reserved.

Strategic Defense Initiative Organization adaptive structures program overview

Science.gov (United States)

Obal, Michael; Sater, Janet M.

In the currently envisioned architecture none of the Strategic Defense System (SDS) elements to be deployed will receive scheduled maintenance. Assessments of performance capability due to changes caused by the uncertain effects of environments will be difficult, at best. In addition, the system will have limited ability to adjust in order to maintain its required performance levels. The Materials and Structures Office of the Strategic Defense Initiative Organization (SDIO) has begun to address solutions to these potential difficulties via an adaptive structures technology program that combines health and environment monitoring with static and dynamic structural control. Conceivable system benefits include improved target tracking and hit-to-kill performance, on-orbit system health monitoring and reporting, and threat attack warning and assessment.

An Assessment of Dialysis Provider's Attitudes towards Timing of Dialysis Initiation in Canada

Directory of Open Access Journals (Sweden)

Bikaramjit S Mann

2014-04-01

Full Text Available Background: Physicians' perceptions and opinions may influence when to initiate dialysis. Objective: To examine providers' perspectives and opinions regarding the timing of dialysis initiation. Design: Online survey. Setting: Community and academic dialysis practices in Canada. Participants: A nationally-representative sample of dialysis providers. Measurements and Methods: Dialysis providers opinions assessing reasons to initiate dialysis at low or high eGFR. Responses were obtained using a 9-point Likert scale. Early dialysis was defined as initiation of dialysis in an individual with an eGFR greater than or equal to 10.5 ml/min/m 2 . A detailed survey was emailed to all members of the Canadian Society of Nephrology (CSN in February 2013. The survey was designed and pre-tested to evaluate duration and ease of administration. Results: One hundred and forty one (25% response rate physicians participated in the survey. The majority were from urban, academic centres and practiced in regionally administered renal programs. Very few respondents had a formal policy regarding the timing of dialysis initiation or formally reviewed new dialysis starts (N = 4, 3.1%. The majority of respondents were either neutral or disagreed that late compared to early dialysis initiation improved outcomes (85–88%, had a negative impact on quality of life (89%, worsened AVF or PD use (84–90%, led to sicker patients (83% or was cost effective (61%. Fifty-seven percent of respondents felt uremic symptoms occurred earlier in patients with advancing age or co-morbid illness. Half (51.8% of the respondents felt there was an absolute eGFR at which they would initiate dialysis in an asymptomatic patient. The majority of respondents would initiate dialysis for classic indications for dialysis, such as volume overload (90.1% and cachexia (83.7% however a significant number chose other factors that may lead them to early dialysis initiation including avoiding an emergency (28

Principal elements of the Basalt Waste Isolation Project performance assessment studies

International Nuclear Information System (INIS)

Baca, R.G.; Wilde, R.T.

1983-12-01

In this paper, three of the principal elements of the Basalt Waste Isolation Project (BWIP) performance assessment studies are focused on: (1) development of a methodology for probabilistic risk assessment, (2) performance analyses of repository subsystems, and (3) selection and ranking of disruptive event scenarios. Other elements of the BWIP performance assessment studies are briefly outlined. 12 references, 5 figures

International Space Station Nickel-Hydrogen Battery Start-Up and Initial Performance

Science.gov (United States)

Cohen, Fred; Dalton, Penni J.

2001-01-01

International Space Station (ISS) Electric Power System (EPS) utilizes Nickel-Hydrogen (Ni-H2) batteries as part of its power system to store electrical energy. The batteries are charged during insolation and discharged during eclipse. The batteries are designed to operate at a 35% depth of discharge (DOD) maximum during normal operation. Thirty eight individual pressure vessel (IPV) Ni-H2 battery cells are series-connected and packaged in an Orbital Replacement Unit (ORU). Two ORUs are series-connected utilizing a total of 76 cells, to form one battery. The ISS is the first application for low earth orbit (LEO) cycling of this quantity of series-connected cells. The P6 Integrated Equipment Assembly (IEA) containing the initial ISS high-power components was successfully launched on November 30, 2000. The IEA contains 12 Battery Subassembly ORUs (6 batteries) that provide station power during eclipse periods. This paper will describe the battery hardware configuration, operation, and role in providing power to the main power system of the ISS. We will also discuss initial battery start-up and performance data.

Performance Assessment Position Paper: Time for Compliance

International Nuclear Information System (INIS)

Wilhite, E.L.

2003-01-01

This study lays out the historical development of the time frame for a low-level waste disposal facility to demonstrate compliance with the DOE performance objectives and requirements. The study recommends that 1,000 years should be used as the time for compliance for all of the performance objectives and requirements (i.e., for the all-pathways, air pathway, radon emanation, water resource protection and inadvertent intruder analyses) for all low-level waste disposal facility performance assessments at the Savannah River Site

Functional Performance and Associations between Performance Tests and Neurological Assessment Differ in Men and Women with Parkinson’s Disease

Directory of Open Access Journals (Sweden)

Kadri Medijainen

2015-01-01

Full Text Available Background. Neurological assessment of a patient with Parkinson’s disease (PD is expected to reflect upon functional performance. As women are known to report more limitations even for same observed functional performance level, present study was designed to examine whether associations between neurological assessments and functional performance differ across genders. Methods. 14 men and 14 women with PD participated. Functional performance was assessed by measuring walking speeds on 10-meter walk test (10MWT and by performing timed-up-and-go-test (TUG. Neurological assessment included Hoehn and Yahr Scale (HY, Movement Disorders Society Unified Parkinson’s Disease Rating Scale (MDS-UPDRS, Schwab and England Activities of Daily Living Scale (S-E, and Mini Mental State Examination (MMSE. Results. In women with PD, Kendall’s tau-b correlation analyses revealed significant correlations between functional performance tests and neurological assessment measures, with the exception in MMSE. No corresponding associations were found for men, although they demonstrated better functional performance, as expected. Conclusion. Men in similar clinical stage of the PD perform better on functional tests than women. Disease severity reflects upon functional performance differently in men and women with PD. Results indicate that when interpreting the assessment results of both functional performance and neurological assessment tests, the gender of the patient should be taken into consideration.

Input data required for specific performance assessment codes

International Nuclear Information System (INIS)

Seitz, R.R.; Garcia, R.S.; Starmer, R.J.; Dicke, C.A.; Leonard, P.R.; Maheras, S.J.; Rood, A.S.; Smith, R.W.

1992-02-01

The Department of Energy's National Low-Level Waste Management Program at the Idaho National Engineering Laboratory generated this report on input data requirements for computer codes to assist States and compacts in their performance assessments. This report gives generators, developers, operators, and users some guidelines on what input data is required to satisfy 22 common performance assessment codes. Each of the codes is summarized and a matrix table is provided to allow comparison of the various input required by the codes. This report does not determine or recommend which codes are preferable

Intended Use of Proceeds and the Performance of Initial Public Offerings (IPO)

OpenAIRE

Adanan Siti Azrina; Sani A’ieshah Abdullah; Bustamam Khair Syakira; Saidin Amilia

2017-01-01

Other than debt financing, Initial Public Offerings (IPO) become a common method of capital raising among firms for various purposes. Prospectus is issued on the pre-issuance of the IPO disclosing various mandatory and non-mandatory voluntary information to help the potential investors in their decision making process. Other than financial information on previous and forecasted future performance, the intended use of the IPO’s proceeds information is one of the crucial information for the sta...

The majority are not performing home-exercises correctly two weeks after their initial instruction-an assessor-blinded study.

Science.gov (United States)

Faber, Mathilde; Andersen, Malene H; Sevel, Claus; Thorborg, Kristian; Bandholm, Thomas; Rathleff, Michael

2015-01-01

Introduction. Time-under-tension (TUT) reflects time under load during strength training and is a proxy of the total exercise dose during strength training. The purpose of this study was to investigate if young participants are able to reproduce TUT and exercise form after two weeks of unsupervised exercises. Material and Methods. The study was an assessor-blinded intervention study with 29 participants. After an initial instruction, all participants were instructed to perform two weeks of home-based unsupervised shoulder abduction exercises three times per week with an elastic exercise band. The participants were instructed in performing an exercise with a predefined TUT (3 s concentric; 2 s isometric; 3 s eccentric; 2 s break) corresponding to a total of 240 s of TUT during three sets of 10 repetitions. After completing two weeks of unsupervised home exercises, they returned for a follow-up assessment of TUT and exercise form while performing the shoulder abduction exercise. A stretch sensor attached to the elastic band was used to measure TUT at baseline and follow-up. A physiotherapist used a pre-defined clinical observation protocol to determine if participants used the correct exercise form. Results. Fourteen of the 29 participants trained with the instructed TUT at follow-up (predefined target: 240 s ±8%). Thirteen of the 29 participants performed the shoulder abduction exercise with a correct exercise form. Seven of the 29 participants trained with the instructed TUT and exercise form at follow-up. Conclusion. The majority of participants did not use the instructed TUT and exercise form at follow-up after two weeks of unsupervised exercises. These findings emphasize the importance of clear and specific home exercise instructions if participants are to follow the given exercise prescription regarding TUT and exercise form as too many or too few exercise stimuli in relation to the initially prescribed amount of exercise most likely will provide a

The majority are not performing home-exercises correctly two weeks after their initial instruction—an assessor-blinded study

Directory of Open Access Journals (Sweden)

Mathilde Faber

2015-07-01

Full Text Available Introduction. Time-under-tension (TUT reflects time under load during strength training and is a proxy of the total exercise dose during strength training. The purpose of this study was to investigate if young participants are able to reproduce TUT and exercise form after two weeks of unsupervised exercises.Material and Methods. The study was an assessor-blinded intervention study with 29 participants. After an initial instruction, all participants were instructed to perform two weeks of home-based unsupervised shoulder abduction exercises three times per week with an elastic exercise band. The participants were instructed in performing an exercise with a predefined TUT (3 s concentric; 2 s isometric; 3 s eccentric; 2 s break corresponding to a total of 240 s of TUT during three sets of 10 repetitions. After completing two weeks of unsupervised home exercises, they returned for a follow-up assessment of TUT and exercise form while performing the shoulder abduction exercise. A stretch sensor attached to the elastic band was used to measure TUT at baseline and follow-up. A physiotherapist used a pre-defined clinical observation protocol to determine if participants used the correct exercise form.Results. Fourteen of the 29 participants trained with the instructed TUT at follow-up (predefined target: 240 s ±8%. Thirteen of the 29 participants performed the shoulder abduction exercise with a correct exercise form. Seven of the 29 participants trained with the instructed TUT and exercise form at follow-up.Conclusion. The majority of participants did not use the instructed TUT and exercise form at follow-up after two weeks of unsupervised exercises. These findings emphasize the importance of clear and specific home exercise instructions if participants are to follow the given exercise prescription regarding TUT and exercise form as too many or too few exercise stimuli in relation to the initially prescribed amount of exercise most likely will provide

Treatment of uncertainty in low-level waste performance assessment

International Nuclear Information System (INIS)

Kozak, M.W.; Olague, N.E.; Gallegos, D.P.; Rao, R.R.

1991-01-01

Uncertainties arise from a number of different sources in low-level waste performance assessment. In this paper the types of uncertainty are reviewed, and existing methods for quantifying and reducing each type of uncertainty are discussed. These approaches are examined in the context of the current low-level radioactive waste regulatory performance objectives, which are deterministic. The types of uncertainty discussed in this paper are model uncertainty, uncertainty about future conditions, and parameter uncertainty. The advantages and disadvantages of available methods for addressing uncertainty in low-level waste performance assessment are presented. 25 refs

Putting HLW performance assessment results in perspective

International Nuclear Information System (INIS)

Neall, F.; Smith, P.; Sumerling, T.; Umeki, H.

1995-01-01

According to performance assessment results for the different disposal concepts investigated, the maximum radiation doses to the population lie well below the limit set in the official Swiss Protection Objective and below the level of present-day natural background radiation. A comparison of different performance assessments has shown that the following key factors determine radionuclide release from a repository: radionuclide inventory, canister material and failure mode, nuclide solubility limits, the permeability of the buffer material, retardation during transport through the near-field, the presence of an excavation disturbed zone in the rock, the distance to the nearest major water-bearing fracture zone, the conceptual model for transport in fractured rock and near-surface dilution and dose factors. (author) 2 figs., 2 tabs

Peer mentoring in doctor performance assessment: strategies, obstacles and benefits.

NARCIS (Netherlands)

Overeem, K.; Driessen, E.W.; Arah, O.A.; Lombarts, K.M.; Wollersheim, H.C.H.; Grol, R.P.T.M.

2010-01-01

CONTEXT: Mentors are increasingly involved in doctor performance assessments. Mentoring seems to be a key determinant in achieving the ultimate goal of those assessments, namely, improving doctor performance. Little is known, however, about how mentors perceive and fulfil this role. OBJECTIVE: The

Peer mentoring in doctor performance assessment: strategies, obstacles and benefits

NARCIS (Netherlands)

Overeem, Karlijn; Driessen, Erik W.; Arah, Onyebuchi A.; Lombarts, Kiki M. J. M. H.; Wollersheim, Hub C.; Grol, Richard P. T. M.

2010-01-01

CONTEXT: Mentors are increasingly involved in doctor performance assessments. Mentoring seems to be a key determinant in achieving the ultimate goal of those assessments, namely, improving doctor performance. Little is known, however, about how mentors perceive and fulfil this role. OBJECTIVE: The

Multi-criteria decision making under uncertainty in building performance assessment

NARCIS (Netherlands)

Hopfe, C.J.; Augenbroe, G.; Hensen, J.L.M.

2013-01-01

Building performance assessment is complex, as it has to respond to multiple criteria. Objectives originating from the demands that are put on energy consumption, acoustical performance, thermal occupant comfort, indoor air quality and many other issues must all be reconciled. An assessment requires

Salt site performance assessment activities

International Nuclear Information System (INIS)

Kircher, J.F.; Gupta, S.K.

1983-01-01

During this year the first selection of the tools (codes) for performance assessments of potential salt sites have been tentatively selected and documented; the emphasis has shifted from code development to applications. During this period prior to detailed characterization of a salt site, the focus is on bounding calculations, sensitivity and with the data available. The development and application of improved methods for sensitivity and uncertainty analysis is a focus for the coming years activities and the subject of a following paper in these proceedings. Although the assessments to date are preliminary and based on admittedly scant data, the results indicate that suitable salt sites can be identified and repository subsystems designed which will meet the established criteria for protecting the health and safety of the public. 36 references, 5 figures, 2 tables

42 CFR 460.136 - Internal quality assessment and performance improvement activities.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Internal quality assessment and performance improvement activities. 460.136 Section 460.136 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES....136 Internal quality assessment and performance improvement activities. (a) Quality assessment and...

Who Repeats Algebra, and How Does Initial Performance Relate to Improvement When the Course Is Repeated?

Science.gov (United States)

Fong, Anthony; Jaquet, Karina; Finkelstein, Neal

2016-01-01

The information provided in this report shows how students perform when they repeat algebra I and how the level of improvement varies depending on initial course performance and the academic measure (course grades or CST scores). This information can help inform decisions and policies regarding whether and under what circumstances students should…

Development of VIPER: a simulator for assessing vision performance of warfighters

Science.gov (United States)

Familoni, Jide; Thompson, Roger; Moyer, Steve; Mueller, Gregory; Williams, Tim; Nguyen, Hung-Quang; Espinola, Richard L.; Sia, Rose K.; Ryan, Denise S.; Rivers, Bruce A.

2016-05-01

activities. In the military context, in addition to reading road signs, this includes vision with night sensors and identification of objects of military interest. Once completed and validated, VIPER will be used to evaluate functional performance before and after refractive surgery. Results: This initial study was to prove the principle, and its results at the time of this publication were very preliminary. Nine Soldiers viewed visible-day and IR-day VIPER simulations with civilian and military targets, separately, at 10 and 30 miles/hour. Analyses were performed separately for visible and IR, and also aggregated. Only the civilian targets are discussed in this report. At 10 miles/hour, the population detected civilian road signs at an aggregated average of 90.11 +/- 64.20 m, and identified them at 26.93 +/- 22.27m. At 30 miles/hour, the corresponding distances were 103.03 +/- 58.81 and 26.26 +/- 8.55, respectively. Conclusion: This preliminary report proves the principle and suggests that VIPER could be a useful clinical tool in longitudinal assessment of functional vision in warfighters.

Visual art teachers and performance assessment methods in ...

African Journals Online (AJOL)

This paper examines the competencies of visual arts teachers in using performance assessment methods, and to ascertain the extent to which the knowledge, skills and experiences of teachers affect their competence in using assessment strategies in their classroom. The study employs a qualitative research design; ...

42 CFR 486.348 - Condition: Quality assessment and performance improvement (QAPI).

Science.gov (United States)

2010-10-01

... Coverage: Organ Procurement Organizations Organ Procurement Organization Process Performance Measures § 486.348 Condition: Quality assessment and performance improvement (QAPI). The OPO must develop, implement... 42 Public Health 5 2010-10-01 2010-10-01 false Condition: Quality assessment and performance...

Twelve tips for assessing surgical performance and use of technical assessment scales

DEFF Research Database (Denmark)

Strandbygaard, Jeanett; Scheele, Fedde; Sørensen, Jette Led

2017-01-01

Using validated assessment scales for technical competence can help structure and standardize assessment and feedback for both the trainee and the supervisor and thereby avoid bias and drive learning. Correct assessment of operative skills can establish learning curves and allow adequate monitoring....... However, the assessment of surgical performance is not an easy task, since it includes many proxy parameters, which are hard to measure. Although numerous technical assessment scales exist, both within laparoscopic and open surgery, the validity evidence is often sparse, and this can raise doubts about...... reliability and educational outcome. Furthermore, the implementation of technical assessment scales varies due to several obstacles and doubts about accurate use. In this 12-tips article, we aim to give the readers a critical and useful appraisal of some of the common questions and misunderstandings regarding...

10 CFR 63.114 - Requirements for performance assessment.

Science.gov (United States)

2010-01-01

... processes of engineered barriers in the performance assessment, including those processes that would adversely affect the performance of natural barriers. Degradation, deterioration, or alteration processes of... surrounding region to the extent necessary, and information on the design of the engineered barrier system...

Performance Assessment of Communication Enhancement Devices TEA HI Threat Headset

Science.gov (United States)

2015-08-01

AFRL-RH-WP-TR-2015-0076 Performance Assessment of Communication Enhancement Devices: TEA HI Threat Headset Hilary L. Gallagher...of Communication Enhancement Devices: TEA HI Threat Headset 5a. CONTRACT NUMBER FA8650-14-D-6501 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER...technology in military applications. Objective performance data provided an assessment of the performance of these devices. The TEA HI Threat headset

Tax Performance Assessment in Scandinavian Countries

Directory of Open Access Journals (Sweden)

Bunescu Liliana

2015-04-01

Full Text Available The aim of this paper is to evaluate fiscal policy performance level in Nordic countries of Europe by quantifying the gap between their performance and an optimum benchmark value. In this study it was selected Denmark, Finland, Sweden and Norway. These countries occupy the first places in the ranking of countries with the highest rate of tax burden in Europe. The first part of paper contains general aspects of fiscal performance in international research and an overview of the Nordic tax systems model. The second part of paper focuses on evaluation of tax policy performance in these countries by using OptimTax scoring analysis. The research is based on a multivariate analysis instrument that uses quantitative data on various aspects of tax policy. OptimTax achieves a score for assessing the degree of optimization of fiscal policy. The results reveal high levels of tax performance in Scandinavian countries and a trend that seems to be more constant than ascending, except Norway.

Assessing students' performance in software requirements engineering education using scoring rubrics

Science.gov (United States)

Mkpojiogu, Emmanuel O. C.; Hussain, Azham

2017-10-01

The study investigates how helpful the use of scoring rubrics is, in the performance assessment of software requirements engineering students and whether its use can lead to students' performance improvement in the development of software requirements artifacts and models. Scoring rubrics were used by two instructors to assess the cognitive performance of a student in the design and development of software requirements artifacts. The study results indicate that the use of scoring rubrics is very helpful in objectively assessing the performance of software requirements or software engineering students. Furthermore, the results revealed that the use of scoring rubrics can also produce a good achievement assessments direction showing whether a student is either improving or not in a repeated or iterative assessment. In a nutshell, its use leads to the performance improvement of students. The results provided some insights for further investigation and will be beneficial to researchers, requirements engineers, system designers, developers and project managers.

40 CFR 63.5991 - By what date must I conduct an initial compliance demonstration or performance test?

Science.gov (United States)

2010-07-01

... compliance demonstration or performance test? 63.5991 Section 63.5991 Protection of Environment ENVIRONMENTAL... POLLUTANTS FOR SOURCE CATEGORIES National Emissions Standards for Hazardous Air Pollutants: Rubber Tire... initial compliance demonstration or performance test? (a) If you have a new or reconstructed affected...

An Empirical Study of a Solo Performance Assessment Model

Science.gov (United States)

Russell, Brian E.

2015-01-01

The purpose of this study was to test a hypothesized model of solo music performance assessment. Specifically, this study investigates the influence of technique and musical expression on perceptions of overall performance quality. The Aural Musical Performance Quality (AMPQ) measure was created to measure overall performance quality, technique,…

Organizational Performance Assessment: Overview of Publications in National Journals

Directory of Open Access Journals (Sweden)

Sandra Mara Iesbik Valmorbida

2012-12-01

Full Text Available In the literature there are several tools that aim to assess organizational performance, such as Balanced Scorecard (BSC, National Quality Award (PNQ, Multicriteria Methodology for Decision Aiding (MCDA, Data envelopment analysis (DEA, Analytic Hierarchy Process (AHP, among others. However, it is perceived in practice doubts as to choose the most appropriate for each organizational context. In this sense, it is argued that to measure the performance of the organization it is necessary that this measure is based on an instrument that allows transparency in the evaluation form, and insert those interested in the evaluation process. The credibility of an evaluation therefore depends on the ability to produce consistent information for all subjects involved in the intervention. The search for tools to improve the way to evaluate organizational performance it is increasingly necessary. The objective of this study is to identify the main tools of organizational performance assessment published in national journals in the area of Administration, Accounting and Tourism, classified by CAPES Qualis A1 to B5. The study is characterized as descriptive and qualitative documentation. We analyzed 489 articles, which resulted in the following results:(i identified the main theme of the authors and regular assessment of organizational performance, (ii from the year 2000 publications on the subject grew substantially, (iii Data Envelopment Analysis (DEA, Balanced Scorecard (BSC and Multicriteria for decision aiding methodology(MCDA-C are the most commonly used tools for evaluating performance, (iv most of the tools found in the literature are multiple criteria, (v described the process used by the tools to assess organizational performance.

Initial performance parameters on FXR

International Nuclear Information System (INIS)

Kulke, B.; Innes, T.G.; Kihara, R.; Scarpetti, R.D.

1982-01-01

Construction of the new flash x-ray induction LINAC (FXR) at Lawrence Livermore National Laboratory has been completed. Initial tuning of the machine has produced stable current pulses in excess of 2 kA at the design energy of 20 MeV, with an 80 ns FWHM pulse width, producing single-pulse radiation doses near 500 Roentgen at one meter from the target. The electronic spot size on the bremsstrahlung target is estimated at 3 to 5 mm. In this paper we will discuss the basic FXR design; running-in and tuning of the machine; emittance measurements; beam stability; switch gap synchronization; and measurements of the radiation dose and angular distribution

Modifying the Soil and Water Assessment Tool to simulate cropland carbon flux: Model development and initial evaluation

International Nuclear Information System (INIS)

Zhang, Xuesong; Izaurralde, R. César; Arnold, Jeffrey G.; Williams, Jimmy R.; Srinivasan, Raghavan

2013-01-01

Climate change is one of the most compelling modern issues and has important implications for almost every aspect of natural and human systems. The Soil and Water Assessment Tool (SWAT) model has been applied worldwide to support sustainable land and water management in a changing climate. However, the inadequacies of the existing carbon algorithm in SWAT limit its application in assessing impacts of human activities on CO 2 emission, one important source of greenhouse gasses (GHGs) that traps heat in the earth system and results in global warming. In this research, we incorporate a revised version of the CENTURY carbon model into SWAT to describe dynamics of soil organic matter (SOM)-residue and simulate land–atmosphere carbon exchange. We test this new SWAT-C model with daily eddy covariance (EC) observations of net ecosystem exchange (NEE) and evapotranspiration (ET) and annual crop yield at six sites across the U.S. Midwest. Results show that SWAT-C simulates well multi-year average NEE and ET across the spatially distributed sites and capture the majority of temporal variation of these two variables at a daily time scale at each site. Our analyses also reveal that performance of SWAT-C is influenced by multiple factors, such as crop management practices (irrigated vs. rainfed), completeness and accuracy of input data, crop species, and initialization of state variables. Overall, the new SWAT-C demonstrates favorable performance for simulating land–atmosphere carbon exchange across agricultural sites with different soils, climate, and management practices. SWAT-C is expected to serve as a useful tool for including carbon flux into consideration in sustainable watershed management under a changing climate. We also note that extensive assessment of SWAT-C with field observations is required for further improving the model and understanding potential uncertainties of applying it across large regions with complex landscapes. - Highlights: • Expanding the SWAT

Modifying the Soil and Water Assessment Tool to simulate cropland carbon flux: Model development and initial evaluation

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xuesong; Izaurralde, R. César [Joint Global Change Research Institute, Pacific Northwest National Laboratory and University of Maryland, College Park, MD 20740 (United States); Arnold, Jeffrey G. [Grassland, Soil and Water Research Laboratory USDA-ARS, Temple, TX 76502 (United States); Williams, Jimmy R. [Blackland Research and Extension Center, AgriLIFE Research, 720 E. Blackland Road, Temple, TX 76502 (United States); Srinivasan, Raghavan [Spatial Sciences Laboratory in the Department of Ecosystem Science and Management, Texas A and M University, College Stations, TX 77845 (United States)

2013-10-01

Climate change is one of the most compelling modern issues and has important implications for almost every aspect of natural and human systems. The Soil and Water Assessment Tool (SWAT) model has been applied worldwide to support sustainable land and water management in a changing climate. However, the inadequacies of the existing carbon algorithm in SWAT limit its application in assessing impacts of human activities on CO{sub 2} emission, one important source of greenhouse gasses (GHGs) that traps heat in the earth system and results in global warming. In this research, we incorporate a revised version of the CENTURY carbon model into SWAT to describe dynamics of soil organic matter (SOM)-residue and simulate land–atmosphere carbon exchange. We test this new SWAT-C model with daily eddy covariance (EC) observations of net ecosystem exchange (NEE) and evapotranspiration (ET) and annual crop yield at six sites across the U.S. Midwest. Results show that SWAT-C simulates well multi-year average NEE and ET across the spatially distributed sites and capture the majority of temporal variation of these two variables at a daily time scale at each site. Our analyses also reveal that performance of SWAT-C is influenced by multiple factors, such as crop management practices (irrigated vs. rainfed), completeness and accuracy of input data, crop species, and initialization of state variables. Overall, the new SWAT-C demonstrates favorable performance for simulating land–atmosphere carbon exchange across agricultural sites with different soils, climate, and management practices. SWAT-C is expected to serve as a useful tool for including carbon flux into consideration in sustainable watershed management under a changing climate. We also note that extensive assessment of SWAT-C with field observations is required for further improving the model and understanding potential uncertainties of applying it across large regions with complex landscapes. - Highlights: • Expanding the

Quality assurance in performance assessments

Energy Technology Data Exchange (ETDEWEB)

Maul, P.R.; Watkins, B.M.; Salter, P.; Mcleod, R [QuantiSci Ltd, Henley-on-Thames (United Kingdom)

1999-01-01

Following publication of the Site-94 report, SKI wishes to review how Quality Assurance (QA) issues could be treated in future work both in undertaking their own Performance Assessment (PA) calculations and in scrutinising documents supplied by SKB (on planning a repository for spent fuels in Sweden). The aim of this report is to identify the key QA issues and to outline the nature and content of a QA plan which would be suitable for SKI, bearing in mind the requirements and recommendations of relevant standards. Emphasis is on issues which are specific to Performance Assessments for deep repositories for radioactive wastes, but consideration is also given to issues which need to be addressed in all large projects. Given the long time over which the performance of a deep repository system must be evaluated, the demonstration that a repository is likely to perform satisfactorily relies on the use of computer-generated model predictions of system performance. This raises particular QA issues which are generally not encountered in other technical areas (for instance, power station operations). The traceability of the arguments used is a key QA issue, as are conceptual model uncertainty, and code verification and validation; these were all included in the consideration of overall uncertainties in the Site-94 project. Additionally, issues which are particularly relevant to SKI include: How QA in a PA fits in with the general QA procedures of the organisation undertaking the work. The relationship between QA as applied by the regulator and the implementor of a repository development programme. Section 2 introduces the discussion of these issues by reviewing the standards and guidance which are available from national and international organisations. This is followed in Section 3 by a review of specific issues which arise from the Site-94 exercise. An outline procedure for managing QA issues in SKI is put forward as a basis for discussion in Section 4. It is hoped that

Quality assurance in performance assessments

International Nuclear Information System (INIS)

Maul, P.R.; Watkins, B.M.; Salter, P.; Mcleod, R

1999-01-01

Following publication of the Site-94 report, SKI wishes to review how Quality Assurance (QA) issues could be treated in future work both in undertaking their own Performance Assessment (PA) calculations and in scrutinising documents supplied by SKB (on planning a repository for spent fuels in Sweden). The aim of this report is to identify the key QA issues and to outline the nature and content of a QA plan which would be suitable for SKI, bearing in mind the requirements and recommendations of relevant standards. Emphasis is on issues which are specific to Performance Assessments for deep repositories for radioactive wastes, but consideration is also given to issues which need to be addressed in all large projects. Given the long time over which the performance of a deep repository system must be evaluated, the demonstration that a repository is likely to perform satisfactorily relies on the use of computer-generated model predictions of system performance. This raises particular QA issues which are generally not encountered in other technical areas (for instance, power station operations). The traceability of the arguments used is a key QA issue, as are conceptual model uncertainty, and code verification and validation; these were all included in the consideration of overall uncertainties in the Site-94 project. Additionally, issues which are particularly relevant to SKI include: How QA in a PA fits in with the general QA procedures of the organisation undertaking the work. The relationship between QA as applied by the regulator and the implementor of a repository development programme. Section 2 introduces the discussion of these issues by reviewing the standards and guidance which are available from national and international organisations. This is followed in Section 3 by a review of specific issues which arise from the Site-94 exercise. An outline procedure for managing QA issues in SKI is put forward as a basis for discussion in Section 4. It is hoped that

Initiating a Programmatic Assessment Report

Science.gov (United States)

Berkaliev, Zaur; Devi, Shavila; Fasshauer, Gregory E.; Hickernell, Fred J.; Kartal, Ozgul; Li, Xiaofan; McCray, Patrick; Whitney, Stephanie; Zawojewski, Judith S.

2014-01-01

In the context of a department of applied mathematics, a program assessment was conducted to assess the departmental goal of enabling undergraduate students to recognize, appreciate, and apply the power of computational tools in solving mathematical problems that cannot be solved by hand, or would require extensive and tedious hand computation. A…

Assessment of global cloud datasets from satellites: Project and database initiated by the GEWEX radiation panel

OpenAIRE

Stubenrauch , C.J.; Rossow , W.B.; Kinne , S.; Ackerman , S.; Cesana , G.; Chepfer , H.; Di Girolamo , L.; Getzewich , B.; Guignard , A.; Heidinger , A.; Maddux , B.C.; Menzel , W.P.; Minnis , P.; Pearl , C.; Platnick , S.

2013-01-01

International audience; The Global Energy and Water Cycle Experiment (GEWEX) Radiation Panel initiated the GEWEX Cloud Assessment in 2005 to compare available, global, long-term cloud data products with the International Satellite Cloud Climatology Project (ISCCP). The GEWEX Cloud Assessment database included cloud properties retrieved from different satellite sensor measurements, taken at various local times and over various time periods. The relevant passive satellite sensors measured radia...

Initial performance of the two-dimensional 1024-channel amplifier array

International Nuclear Information System (INIS)

Kishishita, Tetsuichi; Ikeda, Hirokazu; Tamura, Ken-ichi; Hiruta, Tatsuro; Nakazawa, Kazuhiro; Takashima, Takeshi; Takahashi, Tadayuki

2007-01-01

This paper describes the initial performance of a two-dimensional analog ASIC that has been developed to read out CdTe pixel detectors for the next-generation hard X-ray imager. The readout chip consists of a 32x32 matrix of identical 200μmx200μm pixel cells. Each readout cell contains a low noise charge-sensitive amplifier, three-stage pulse shaping amplifiers and a comparator circuit. Pulse processing circuits have been also designed to achieve lower power consumption for the space application. Analog outputs by injecting a test pulse have been obtained from 991 pixels out of 1024 pixels. The mean noise level is 297+/-29 electrons (rms) and power consumption is 110μW/pixel

Assessment of Work Performance (AWP)--development of an instrument.

Science.gov (United States)

Sandqvist, Jan L; Törnquist, Kristina B; Henriksson, Chris M

2006-01-01

Adequate work assessments are a matter of importance both for individuals and society [5,29,31,38,40,46,52]. However, there is a lack of adequate and reliable instruments for use in work rehabilitation [14,15,20,21,31,44]. The purpose of this study was to develop and evaluate an observation instrument for assessing work performance, the AWP (Assessment of Work Performance). The purpose of the 14-item instrument is to assess the individual's observable working skills in three different areas: motor skills, process skills, and communication and interaction skills. This article describes the development and results of preliminary testing of the AWP. The testing indicates a satisfactory face validity and utility for the AWP and supports further research and testing of the instrument.

How Six Sigma Methodology Improved Doctors' Performance

Science.gov (United States)

Zafiropoulos, George

2015-01-01

Six Sigma methodology was used in a District General Hospital to assess the effect of the introduction of an educational programme to limit unnecessary admissions. The performance of the doctors involved in the programme was assessed. Ishikawa Fishbone and 5 S's were initially used and Pareto analysis of their findings was performed. The results…

Performance assessment of gamma cameras. Part 1

International Nuclear Information System (INIS)

Elliot, A.T.; Short, M.D.; Potter, D.C.; Barnes, K.J.

1980-11-01

The Dept. of Health and Social Security and the Scottish Home and Health Dept. has sponsored a programme of measurements of the important performance characteristics of 15 leading types of gamma cameras providing a routine radionuclide imaging service in hospitals throughout the UK. Measurements have been made of intrinsic resolution, system resolution, non-uniformity, spatial distortion, count rate performance, sensitivity, energy resolution and shield leakage. The main aim of this performance assessment was to provide sound information to the NHS to ease the task of those responsible for the purchase of gamma cameras. (U.K.)

Hanford immobilized low-activity tank waste performance assessment

International Nuclear Information System (INIS)

Mann, F.M.

1998-01-01

The Hanford Immobilized Low-Activity Tank Waste Performance Assessment examines the long-term environmental and human health effects associated with the planned disposal of the vitrified low-level fraction of waste presently contained in Hanford Site tanks. The tank waste is the by-product of separating special nuclear materials from irradiated nuclear fuels over the past 50 years. This waste has been stored in underground single and double-shell tanks. The tank waste is to be retrieved, separated into low and high-activity fractions, and then immobilized by private vendors. The US Department of Energy (DOE) will receive the vitrified waste from private vendors and plans to dispose of the low-activity fraction in the Hanford Site 200 East Area. The high-level fraction will be stored at Hanford until a national repository is approved. This report provides the site-specific long-term environmental information needed by the DOE to issue a Disposal Authorization Statement that would allow the modification of the four existing concrete disposal vaults to provide better access for emplacement of the immobilized low-activity waste (ILAW) containers; filling of the modified vaults with the approximately 5,000 ILAW containers and filler material with the intent to dispose of the containers; construction of the first set of next-generation disposal facilities. The performance assessment activity will continue beyond this assessment. The activity will collect additional data on the geotechnical features of the disposal sites, the disposal facility design and construction, and the long-term performance of the waste. Better estimates of long-term performance will be produced and reviewed on a regular basis. Performance assessments supporting closure of filled facilities will be issued seeking approval of those actions necessary to conclude active disposal facility operations. This report also analyzes the long-term performance of the currently planned disposal system as a basis

Hanford immobilized low-activity tank waste performance assessment

Energy Technology Data Exchange (ETDEWEB)

Mann, F.M.

1998-03-26

The Hanford Immobilized Low-Activity Tank Waste Performance Assessment examines the long-term environmental and human health effects associated with the planned disposal of the vitrified low-level fraction of waste presently contained in Hanford Site tanks. The tank waste is the by-product of separating special nuclear materials from irradiated nuclear fuels over the past 50 years. This waste has been stored in underground single and double-shell tanks. The tank waste is to be retrieved, separated into low and high-activity fractions, and then immobilized by private vendors. The US Department of Energy (DOE) will receive the vitrified waste from private vendors and plans to dispose of the low-activity fraction in the Hanford Site 200 East Area. The high-level fraction will be stored at Hanford until a national repository is approved. This report provides the site-specific long-term environmental information needed by the DOE to issue a Disposal Authorization Statement that would allow the modification of the four existing concrete disposal vaults to provide better access for emplacement of the immobilized low-activity waste (ILAW) containers; filling of the modified vaults with the approximately 5,000 ILAW containers and filler material with the intent to dispose of the containers; construction of the first set of next-generation disposal facilities. The performance assessment activity will continue beyond this assessment. The activity will collect additional data on the geotechnical features of the disposal sites, the disposal facility design and construction, and the long-term performance of the waste. Better estimates of long-term performance will be produced and reviewed on a regular basis. Performance assessments supporting closure of filled facilities will be issued seeking approval of those actions necessary to conclude active disposal facility operations. This report also analyzes the long-term performance of the currently planned disposal system as a basis

Assessing vocal performance in complex birdsong: a novel approach.

Science.gov (United States)

Geberzahn, Nicole; Aubin, Thierry

2014-08-06

Vocal performance refers to the ability to produce vocal signals close to physical limits. Such motor skills can be used by conspecifics to assess a signaller's competitive potential. For example it is difficult for birds to produce repeated syllables both rapidly and with a broad frequency bandwidth. Deviation from an upper-bound regression of frequency bandwidth on trill rate has been widely used to assess vocal performance. This approach is, however, only applicable to simple trilled songs, and even then may be affected by differences in syllable complexity. Using skylarks (Alauda arvensis) as a birdsong model with a very complex song structure, we detected another performance trade-off: minimum gap duration between syllables was longer when the frequency ratio between the end of one syllable and the start of the next syllable (inter-syllable frequency shift) was large. This allowed us to apply a novel measure of vocal performance ¿ vocal gap deviation: the deviation from a lower-bound regression of gap duration on inter-syllable frequency shift. We show that skylarks increase vocal performance in an aggressive context suggesting that this trait might serve as a signal for competitive potential. We suggest using vocal gap deviation in future studies to assess vocal performance in songbird species with complex structure.

Performance and Cognitive Assessment in 3-D Modeling

Science.gov (United States)

Fahrer, Nolan E.; Ernst, Jeremy V.; Branoff, Theodore J.; Clark, Aaron C.

2011-01-01

The purpose of this study was to investigate identifiable differences between performance and cognitive assessment scores in a 3-D modeling unit of an engineering drafting course curriculum. The study aimed to provide further investigation of the need of skill-based assessments in engineering/technical graphics courses to potentially increase…

Tajikistan - Public Expenditure and Financial Accountability Assessment : Performance Report

OpenAIRE

World Bank

2007-01-01

This assessment is based on work undertaken between October 2006 and May 2007. The summary assessment covers the following three areas: an integrated assessment of PFM performance based on the 28+3 PEFA indicators, an assessment of the impact of PFM weaknesses, and the prospects for reform planning and implementation. The main report consists of four sections: an introduction, the country ...

A Valid and Reliable Tool to Assess Nursing Students` Clinical Performance

OpenAIRE

Mehrnoosh Pazargadi; Tahereh Ashktorab; Sharareh Khosravi; Hamid Alavi majd

2013-01-01

Background: The necessity of a valid and reliable assessment tool is one of the most repeated issues in nursing students` clinical evaluation. But it is believed that present tools are not mostly valid and can not assess students` performance properly.Objectives: This study was conducted to design a valid and reliable assessment tool for evaluating nursing students` performance in clinical education.Methods: In this methodological study considering nursing students` performance definition; th...

Hydrological performance assessment on siting the high level radioactive waste repository

International Nuclear Information System (INIS)

Guo Yonghai; Liu Shufen; Wang Ju; Wang Zhiming; Su Rui; Lv Chuanhe; Zong Zihua

2007-01-01

Based on the research experiences in China and some developed countries in the world, the processes and methods on hydrological performance assessment for the siting of high radioactive repository are discussed in this paper. The methods and contents of hydrological performance assessment are discussed respectively for region, area and site hydrological investigation stages. At the same time, the hydrological performance assessment of the potential site for high level radioactive waste in China is introduced. (authors)

Enhanced Performance Assessment System (EPAS) for carbon sequestration.

Energy Technology Data Exchange (ETDEWEB)

Wang, Yifeng; Sun, Amy Cha-Tien; McNeish, Jerry A. (Sandia National Laboratories, Livermore, CA); Dewers, Thomas A.; Hadgu, Teklu; Jove-Colon, Carlos F.

2010-09-01

Carbon capture and sequestration (CCS) is an option to mitigate impacts of atmospheric carbon emission. Numerous factors are important in determining the overall effectiveness of long-term geologic storage of carbon, including leakage rates, volume of storage available, and system costs. Recent efforts have been made to apply an existing probabilistic performance assessment (PA) methodology developed for deep nuclear waste geologic repositories to evaluate the effectiveness of subsurface carbon storage (Viswanathan et al., 2008; Stauffer et al., 2009). However, to address the most pressing management, regulatory, and scientific concerns with subsurface carbon storage (CS), the existing PA methodology and tools must be enhanced and upgraded. For example, in the evaluation of a nuclear waste repository, a PA model is essentially a forward model that samples input parameters and runs multiple realizations to estimate future consequences and determine important parameters driving the system performance. In the CS evaluation, however, a PA model must be able to run both forward and inverse calculations to support optimization of CO{sub 2} injection and real-time site monitoring as an integral part of the system design and operation. The monitoring data must be continually fused into the PA model through model inversion and parameter estimation. Model calculations will in turn guide the design of optimal monitoring and carbon-injection strategies (e.g., in terms of monitoring techniques, locations, and time intervals). Under the support of Laboratory-Directed Research & Development (LDRD), a late-start LDRD project was initiated in June of Fiscal Year 2010 to explore the concept of an enhanced performance assessment system (EPAS) for carbon sequestration and storage. In spite of the tight time constraints, significant progress has been made on the project: (1) Following the general PA methodology, a preliminary Feature, Event, and Process (FEP) analysis was performed for

Student Self-Assessment and Faculty Assessment of Performance in an Interprofessional Error Disclosure Simulation Training Program.

Science.gov (United States)

Poirier, Therese I; Pailden, Junvie; Jhala, Ray; Ronald, Katie; Wilhelm, Miranda; Fan, Jingyang

2017-04-01

Objectives. To conduct a prospective evaluation for effectiveness of an error disclosure assessment tool and video recordings to enhance student learning and metacognitive skills while assessing the IPEC competencies. Design. The instruments for assessing performance (planning, communication, process, and team dynamics) in interprofessional error disclosure were developed. Student self-assessment of performance before and after viewing the recordings of their encounters were obtained. Faculty used a similar instrument to conduct real-time assessments. An instrument to assess achievement of the Interprofessional Education Collaborative (IPEC) core competencies was developed. Qualitative data was reviewed to determine student and faculty perceptions of the simulation. Assessment. The interprofessional simulation training involved a total of 233 students (50 dental, 109 nursing and 74 pharmacy). Use of video recordings made a significant difference in student self-assessment for communication and process categories of error disclosure. No differences in student self-assessments were noted among the different professions. There were differences among the family member affects for planning and communication for both pre-video and post-video data. There were significant differences between student self-assessment and faculty assessment for all paired comparisons, except communication in student post-video self-assessment. Students' perceptions of achievement of the IPEC core competencies were positive. Conclusion. The use of assessment instruments and video recordings may have enhanced students' metacognitive skills for assessing performance in interprofessional error disclosure. The simulation training was effective in enhancing perceptions on achievement of IPEC core competencies. This enhanced assessment process appeared to enhance learning about the skills needed for interprofessional error disclosure.

Development and initial validity of the in-hand manipulation assessment.

Science.gov (United States)

Klymenko, Gabrielle; Liu, Karen P Y; Bissett, Michelle; Fong, Kenneth N K; Welage, Nandana; Wong, Rebecca S M

2018-04-01

A review of the literature related to in-hand manipulation (IHM) revealed that there is no assessment which specifically measures this construct in the adult population. This study reports the face and content validity of an IHM assessment for adults with impaired hand function based on expert opinion. The definition of IHM skills, assessment tasks and scoring methods identified from literature was discussed in a focus group (n = 4) to establish face validity. An expert panel (n = 16) reviewed the content validity of the proposed assessment; evaluating the representativeness and relevance of encompassing the IHM skills in the proposed assessment tasks, the clarity and importance to daily life of the task and the clarity and applicability to clinical environment of the scoring method. The content validity was calculated using the content validity index for both the individual task and all tasks together (I-CVI and S-CVI). Feedback was incorporated to create the assessment. The focus group members agreed to include 10 assessment tasks that covered all IHM skills. In the expert panel review, all tasks received an I-CVI above 0.78 and S-CVI above 0.80 in representativeness and relevance ratings, representing good content validity. With the comments from the expert panel, tasks were modified to improve the clarity and importance to daily life. A four-point Likert scale was identified for assessing both the completion of the assessment tasks and the quality of IHM skills within the task performance. Face and content validity were established in this new IHM assessment. Further studies to examine psychometric properties and use within clinical practice are recommended. © 2018 Occupational Therapy Australia.

Safety assessment, safety performance indicators at the Paks Nuclear Power Plant

International Nuclear Information System (INIS)

Baji, C.; Vamos, G.; Toth, J.

2001-01-01

The Paks Nuclear Power Plant has been using different methods of safety assessment (event analysis, self-assessment, probabilistic safety analysis), including performance indicators characterizing both operational and safety performance since the early years of operation of the plant. Regarding the safety performance, the indicators include safety system performance, number of scrams, release of radioactive materials, number of safety significant events, industrial safety indicator, etc. The Paks NPP also reports a set of ten indicators to WANO Performance Indicator Programme which, among others, include safety related indicators as well. However, a more systematic approach to structuring and trending safety indicators is needed so that they can contribute to the enhancement of the operational safety. A more comprehensive set of indicators and a systematic evaluation process was introduced in 1996. The performance indicators framework proposed by the IAEA was adapted to Paks in this year to further improve the process. Safety culture assessment and characterizing safety culture is part of the assessment process. (author)

Functional Performance and Associations between Performance Tests and Neurological Assessment Differ in Men and Women with Parkinson’s Disease

OpenAIRE

Medijainen, Kadri; Pääsuke, Mati; Lukmann, Aet; Taba, Pille

2015-01-01

Background. Neurological assessment of a patient with Parkinson's disease (PD) is expected to reflect upon functional performance. As women are known to report more limitations even for same observed functional performance level, present study was designed to examine whether associations between neurological assessments and functional performance differ across genders. Methods. 14 men and 14 women with PD participated. Functional performance was assessed by measuring walking speeds on 10-mete...

An Updated Performance Assessment For A New Low-Level Radioactive Waste Disposal Facility In West Texas - 12192

Energy Technology Data Exchange (ETDEWEB)

Dornsife, William P.; Kirk, J. Scott; Shaw, Chris G. [Waste Control Specialists LLC, Andrews, Texas (United States)

2012-07-01

This Performance Assessment (PA) submittal is an update to the original PA that was developed to support the licensing of the Waste Control Specialists LLC Low-Level Radioactive Waste (LLRW) disposal facility. This update includes both the Compact Waste Facility (CWF) and the Federal Waste Facility (FWF), in accordance with Radioactive Material License (RML) No. R04100, License Condition (LC) 87. While many of the baseline assumptions supporting the initial license application PA were incorporated in this update, a new transport code, GoldSim, and new deterministic groundwater flow codes, including HYDRUS and MODFLOWSURFACT{sup TM}, were employed to demonstrate compliance with the performance objectives codified in the regulations and RML No. R04100, LC 87. A revised source term, provided by the Texas Commission on Environmental Quality staff, was used to match the initial 15 year license term. This updated PA clearly confirms and demonstrates the robustness of the characteristics of the site's geology and the advanced engineering design of the disposal units. Based on the simulations from fate and transport models, the radiation doses to members of the general public and site workers predicted in the initial and updated PA were a small fraction of the criterion doses of 0.25 mSv and 50 mSv, respectively. In a comparison between the results of the updated PA against the one developed in support of the initial license, both clearly demonstrated the robustness of the characteristics of the site's geology and engineering design of the disposal units. Based on the simulations from fate and transport models, the radiation doses to members of the general public predicted in the initial and updated PA were a fraction of the allowable 25 mrem/yr (0.25 m sievert/yr) dose standard for tens-of-thousands of years into the future. Draft Texas guidance on performance assessment (TCEQ, 2004) recommends a period of analysis equal to 1,000 years or until peak doses from

Initial operation and performance of the PDX neutral-beam injection system

International Nuclear Information System (INIS)

Kugel, H.W.; Eubank, H.P.; Kozub, T.A.; Rossmassler, J.E.; Schilling, G.; van Halle, A.; Williams, M.D.

1982-01-01

In 1981, the joint ORNL/PPPL PDX neutral beam heating project succeeded in reliably injecting 7.2 MW of D 0 into the PDX plasma, at nearly perpendicular angles, and achieved ion temperatures up to 6.5 keV. The expeditious achievement of this result was due to the thorough conditioning and qualification of the PDX neutral beam ion sources at ORNL prior to delivery coupled with several field design changes and improvements in the injection system made at PPPL as a result of neutral beam operating experience with the PLT tokamak. It has been found that the operation of high power neutral beam injection systems in a tokamak-neutral beam environment requires procedures and performance different from those required for development operation on test stands. In this paper, we review the installatin of the PDX neutral beam injection system, and its operation and performance during the initial high power plasma heating experiments with the PDX tokamak

Radiological performance assessment for the E-Area Vaults Disposal Facility

International Nuclear Information System (INIS)

Cook, J.R.

1994-01-01

These document contains appendices A-M for the performance assessment. They are A: details of models and assumptions, B: computer codes, C: data tabulation, D: geochemical interactions, E: hydrogeology of the Savannah River Site, F: software QA plans, G: completeness review guide, H: performance assessment peer review panel recommendations, I: suspect soil performance analysis, J: sensitivity/uncertainty analysis, K: vault degradation study, L: description of naval reactor waste disposal, M: porflow input file

Performance of upper gastrointestinal bleeding risk assessment scores in variceal bleeding

DEFF Research Database (Denmark)

Ngu, JH; Laursen, Stig Borbjerg; Chin, YK

2017-01-01

Performance of upper gastrointestinal bleeding risk assessment scores in variceal bleeding: a prospective international multicenter study.......Performance of upper gastrointestinal bleeding risk assessment scores in variceal bleeding: a prospective international multicenter study....

Reactivity initiated accident analyses for the safety assessment of upgraded JRR-3

International Nuclear Information System (INIS)

Harami, Taikan; Uemura, Mutsumi; Ohnishi, Nobuaki

1984-08-01

JRR-3, currently a heavy water moderated and cooled 10 MW reactor, is to be upgraded to a light water moderated and cooled, heavy water reflected 20 MW reactor. This report describes the analytical results of reactivity initiated accidents for the safety assessment of upgraded JRR-3. The following five cases have been selected for the assessment; (1) uncontrolled control rod withdrawal from zero power, (2) uncontrolled control rod withdrawal from full power, (3) removal of irradiation samples, (4) increase of primary coolant flow, (5) failure of heavy water tank. Parameter studies have been made for each of the above cases to cover possible uncertainties. All analyses have been made by a computer code EUREKA-2. The results show that the safety criteria for upgraded JRR-3 are all met and the adequacy of the design is confirmed. (author)

Peer assessment of aviation performance: inconsistent for good reasons.

Science.gov (United States)

Roth, Wolff-Michael; Mavin, Timothy J

2015-03-01

Research into expertise is relatively common in cognitive science concerning expertise existing across many domains. However, much less research has examined how experts within the same domain assess the performance of their peer experts. We report the results of a modified think-aloud study conducted with 18 pilots (6 first officers, 6 captains, and 6 flight examiners). Pairs of same-ranked pilots were asked to rate the performance of a captain flying in a critical pre-recorded simulator scenario. Findings reveal (a) considerable variance within performance categories, (b) differences in the process used as evidence in support of a performance rating, (c) different numbers and types of facts (cues) identified, and (d) differences in how specific performance events affect choice of performance category and gravity of performance assessment. Such variance is consistent with low inter-rater reliability. Because raters exhibited good, albeit imprecise, reasons and facts, a fuzzy mathematical model of performance rating was developed. The model provides good agreement with observed variations. Copyright © 2014 Cognitive Science Society, Inc.

Competency-based assessment in surgeon-performed head and neck ultrasonography

DEFF Research Database (Denmark)

Todsen, Tobias; Melchiors, Jacob; Charabi, Birgitte

2017-01-01

and to establish validity evidence for an objective structured assessment of ultrasound skills (OSAUS) used for competency-based assessment. STUDY DESIGN: A prospective experimental study. METHODS: Six otolaryngologists and 11 US novices were included in a standardized test setup for which they had to perform...... and the diagnostic accuracy was found (Spearman's ρ, 0.85; P competence with good reliability, significant discrimination between US competence levels, and a strong...... correlation of assessment score to diagnostic accuracy. An OSAUS pass/fail score was established and could be used for competence-based assessment in surgeon-performed HNUS. LEVEL OF EVIDENCE: NA. Laryngoscope, 2017....

Using performance assessment for radioactive waste disposal decision making -- implementation of the methodology into the third performance assessment iteration of the Greater Confinement Disposal site

International Nuclear Information System (INIS)

Gallegos, D.P.; Conrad, S.H.; Baer, T.A.

1993-01-01

The US Department of Energy is responsible for the disposal of a variety of radioactive wastes. Some of these wastes are prohibited from shallow land burial and also do not meet the waste acceptance criteria for proposed waste repositories at the Waste Isolation Pilot Plant (WIPP) and Yucca Mountain. These have been termed ''special-case'' waste and require an alternative disposal method. From 1984 to 1989, the Department of Energy disposed of a small quantity of special-case transuranic wastes at the Greater Confinement Disposal (GCD) site at the Nevada Test Site. In this paper, an iterative performance assessment is demonstrated as a useful decision making tool in the overall compliance assessment process for waste disposal. The GCD site has been used as the real-site implementation and test of the performance assessment approach. Through the first two performance assessment iterations for the GCD site, and the transition into the third, we demonstrate how the performance assessment methodology uses probabilistic risk concepts to guide affective decisions about site characterization activities and how it can be used as a powerful tool in bringing compliance decisions to closure

Scramjet Performance Assessment Using Water Absorption Diagnostics (U)

Science.gov (United States)

Cavolowsky, John A.; Loomis, Mark P.; Deiwert, George

1995-01-01

Simultaneous multiple path measurements of temperature and H2O concentration will be presented for the AIMHYE test entries in the NASA Ames 16-Inch Shock Tunnel. Monitoring the progress of high temperature chemical reactions that define scramjet combustor efficiencies is a task uniquely suited to nonintrusive optical diagnostics. One application strategy to overcome the many challenges and limitations of nonintrusive measurements is to use laser absorption spectroscopy coupled with optical fibers. Absorption spectroscopic techniques with rapidly tunable lasers are capable of making simultaneous measurements of mole fraction, temperature, pressure, and velocity. The scramjet water absorption diagnostic was used to measure combustor efficiency and was compared to thrust measurements using a nozzle force balance and integrated nozzle pressures to develop a direct technique for evaluating integrated scramjet performance. Tests were initially performed with a diode laser tuning over a water absorption feature at 1391.7 nm. A second diode laser later became available at a wavelength near 1343.3 nm covering an additional water absorption feature and was incorporated in the system for a two-wavelength technique. Both temperature and mole fraction can be inferred from the lineshape analysis using this approach. Additional high temperature spectroscopy research was conducted to reduce uncertainties in the scramjet application. The lasers are optical fiber coupled to ports at the combustor exit and in the nozzle region. The output from the two diode lasers were combined in a single fiber, and the resultant two-wavelength beam was subsequently split into four legs. Each leg was directed through 60 meters of optical fiber to four combustor exit locations for measurement of beam intensity after absorption by the water within the flow. Absorption results will be compared to 1D combustor analysis using RJPA and nozzle CFD computations as well as to data from a nozzle metric

The Empirical Testing of a Musical Performance Assessment Paradigm

Science.gov (United States)

Russell, Brian E.

2010-01-01

The purpose of this study was to test a hypothesized model of aurally perceived performer-controlled musical factors that influence assessments of performance quality. Previous research studies on musical performance constructs, musical achievement, musical expression, and scale construction were examined to identify the factors that influence…

Preliminary performance assessment for the Waste Isolation Pilot Plant, December 1992

International Nuclear Information System (INIS)

1993-08-01

Before disposing of transuranic radioactive waste in the Waste Isolation Pilot Plant (WIPP), the United States Department of Energy (DOE) must evaluate compliance with applicable long-term regulations of the United States Environmental Protection Agency (EPA). Sandia National Laboratories is conducting iterative performance assessments (PAs) of the WIPP for the DOE to provide interim guidance while preparing for a final compliance evaluation. This volume of the 1992 PA contains results of uncertainty and sensitivity analyses with respect to migration of gas and brine from the undisturbed repository. Additional information about the 1992 PA is provided in other volumes. Volume 1 contains an overview of WIPP PA and results of a preliminary comparison with 40 CFR 191, Subpart B. Volume 2 describes the technical basis for the performance assessment, including descriptions of the linked computational models used in the Monte Carlo analyses. Volume 3 contains the reference data base and values for input parameters used in consequence and probability modeling. Volume 4 contains uncertainty and sensitivity analyses with respect to the EPA's Environmental Standards for the Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes (40 CFR 191, Subpart B). Finally, guidance derived from the entire 1992 PA is presented in Volume 6. Results of the 1992 uncertainty and sensitivity analyses indicate that, conditional on the modeling assumptions and the assigned parameter-value distributions, the most important parameters for which uncertainty has the potential to affect gas and brine migration from the undisturbed repository are: initial liquid saturation in the waste, anhydrite permeability, biodegradation-reaction stoichiometry, gas-generation rates for both corrosion and biodegradation under inundated conditions, and the permeability of the long-term shaft seal

The European Society of Gastrointestinal Endoscopy Quality Improvement Initiative: developing performance measures.

Science.gov (United States)

Rutter, Matthew D; Senore, Carlo; Bisschops, Raf; Domagk, Dirk; Valori, Roland; Kaminski, Michal F; Spada, Cristiano; Bretthauer, Michael; Bennett, Cathy; Bellisario, Cristina; Minozzi, Silvia; Hassan, Cesare; Rees, Colin; Dinis-Ribeiro, Mário; Hucl, Tomas; Ponchon, Thierry; Aabakken, Lars; Fockens, Paul

2016-02-01

The European Society of Gastrointestinal Endoscopy (ESGE) and United European Gastroenterology (UEG) have a vision to create a thriving community of endoscopy services across Europe, collaborating with each other to provide high quality, safe, accurate, patient-centered and accessible endoscopic care. Whilst the boundaries of what can be achieved by advanced endoscopy are continually expanding, we believe that one of the most fundamental steps to achieving our goal is to raise the quality of everyday endoscopy. The development of robust, consensus- and evidence-based key performance measures is the first step in this vision. ESGE and UEG have identified quality of endoscopy as a major priority. This paper explains the rationale behind the ESGE Quality Improvement Initiative and describes the processes that were followed. We recommend that all units develop mechanisms for audit and feedback of endoscopist and service performance using the ESGE performance measures that will be published in future issues of this journal over the next year. We urge all endoscopists and endoscopy services to prioritize quality and to ensure that these performance measures are implemented and monitored at a local level, so that we can provide the highest possible care for our patients.

Cluster Detection Tests in Spatial Epidemiology: A Global Indicator for Performance Assessment.

Directory of Open Access Journals (Sweden)

Aline Guttmann

Full Text Available In cluster detection of disease, the use of local cluster detection tests (CDTs is current. These methods aim both at locating likely clusters and testing for their statistical significance. New or improved CDTs are regularly proposed to epidemiologists and must be subjected to performance assessment. Because location accuracy has to be considered, performance assessment goes beyond the raw estimation of type I or II errors. As no consensus exists for performance evaluations, heterogeneous methods are used, and therefore studies are rarely comparable. A global indicator of performance, which assesses both spatial accuracy and usual power, would facilitate the exploration of CDTs behaviour and help between-studies comparisons. The Tanimoto coefficient (TC is a well-known measure of similarity that can assess location accuracy but only for one detected cluster. In a simulation study, performance is measured for many tests. From the TC, we here propose two statistics, the averaged TC and the cumulated TC, as indicators able to provide a global overview of CDTs performance for both usual power and location accuracy. We evidence the properties of these two indicators and the superiority of the cumulated TC to assess performance. We tested these indicators to conduct a systematic spatial assessment displayed through performance maps.

Cluster Detection Tests in Spatial Epidemiology: A Global Indicator for Performance Assessment

Science.gov (United States)

Guttmann, Aline; Li, Xinran; Feschet, Fabien; Gaudart, Jean; Demongeot, Jacques; Boire, Jean-Yves; Ouchchane, Lemlih

2015-01-01

In cluster detection of disease, the use of local cluster detection tests (CDTs) is current. These methods aim both at locating likely clusters and testing for their statistical significance. New or improved CDTs are regularly proposed to epidemiologists and must be subjected to performance assessment. Because location accuracy has to be considered, performance assessment goes beyond the raw estimation of type I or II errors. As no consensus exists for performance evaluations, heterogeneous methods are used, and therefore studies are rarely comparable. A global indicator of performance, which assesses both spatial accuracy and usual power, would facilitate the exploration of CDTs behaviour and help between-studies comparisons. The Tanimoto coefficient (TC) is a well-known measure of similarity that can assess location accuracy but only for one detected cluster. In a simulation study, performance is measured for many tests. From the TC, we here propose two statistics, the averaged TC and the cumulated TC, as indicators able to provide a global overview of CDTs performance for both usual power and location accuracy. We evidence the properties of these two indicators and the superiority of the cumulated TC to assess performance. We tested these indicators to conduct a systematic spatial assessment displayed through performance maps. PMID:26086911

Assessing the performance of dynamical trajectory estimates

Science.gov (United States)

Bröcker, Jochen

2014-06-01

Estimating trajectories and parameters of dynamical systems from observations is a problem frequently encountered in various branches of science; geophysicists for example refer to this problem as data assimilation. Unlike as in estimation problems with exchangeable observations, in data assimilation the observations cannot easily be divided into separate sets for estimation and validation; this creates serious problems, since simply using the same observations for estimation and validation might result in overly optimistic performance assessments. To circumvent this problem, a result is presented which allows us to estimate this optimism, thus allowing for a more realistic performance assessment in data assimilation. The presented approach becomes particularly simple for data assimilation methods employing a linear error feedback (such as synchronization schemes, nudging, incremental 3DVAR and 4DVar, and various Kalman filter approaches). Numerical examples considering a high gain observer confirm the theory.

Building quality into performance and safety assessment software

International Nuclear Information System (INIS)

Wojciechowski, L.C.

2011-01-01

Quality assurance is integrated throughout the development lifecycle for performance and safety assessment software. The software used in the performance and safety assessment of a Canadian deep geological repository (DGR) follows the CSA quality assurance standard CSA-N286.7 [1], Quality Assurance of Analytical, Scientific and Design Computer Programs for Nuclear Power Plants. Quality assurance activities in this standard include tasks such as verification and inspection; however, much more is involved in producing a quality software computer program. The types of errors found with different verification methods are described. The integrated quality process ensures that defects are found and corrected as early as possible. (author)

Assessing does not mean threatening: the purpose of assessment as a key determinant of girls' and boys' performance in a science class.

Science.gov (United States)

Souchal, Carine; Toczek, Marie-Christine; Darnon, Céline; Smeding, Annique; Butera, Fabrizio; Martinot, Delphine

2014-03-01

Is it possible to reach performance equality between boys and girls in a science class? Given the stereotypes targeting their groups in scientific domains, diagnostic contexts generally lower girls' performance and non-diagnostic contexts may harm boys' performance. The present study tested the effectiveness of a mastery-oriented assessment, allowing both boys and girls to perform at an optimal level in a science class. Participants were 120 boys and 72 girls (all high-school students). Participants attended a science lesson while expecting a performance-oriented assessment (i.e., an assessment designed to compare and select students), a mastery-oriented assessment (i.e., an assessment designed to help students in their learning), or no assessment of this lesson. In the mastery-oriented assessment condition, both boys and girls performed at a similarly high level, whereas the performance-oriented assessment condition reduced girls' performance and the no-assessment condition reduced boys' performance. One way to increase girls' performance on a science test without harming boys' performance is to present assessment as a tool for improving mastery rather than as a tool for comparing performances. © 2013 The British Psychological Society.

Performance assessment development for a LILW repository in Slovenia

International Nuclear Information System (INIS)

Zeleznik, N.; Mele, I.

2001-01-01

Simultaneously with the site selection process for a low and intermediate level radioactive waste (LILW) repository, the preliminary assessment of the influence of the specific disposal concept on the environment and on the population was developed. The performance assessment team, organized in 1997 by ARAO, prepared several basic studies in order to clarify the objectives of the performance and safety assessment (PA/SA) procedure. In 1999 also the first performance assessment of two safety cases (surface and underground) for generic site for a LILW repository was realized. In the year 2000 activities on PA/SA analyses continued. A systematic, generic list was prepared of all possible features, events and processes (FEP list) predictable for surface or underground LILW disposal in Slovenia. Recommended and selected were the most reliable scenarios with conceptual models for LILW disposal in normal and altered evolution conditions. New verification of the obtained results was done with more powerful and accurate models for the surface repository over an aquifer of lower water permeability and an underground repository in a plastic rock. The results for both generic cases under normal evolution scenarios showed that there is a negligible dose influence on members of the critical population due to the migration of radionuclides from the foreseen LILW repository. The results of the already performed work as well as plans for the future activities are presented in the paper.(author)

SKI SITE-94. Deep Repository Performance Assessment Project. Summary

International Nuclear Information System (INIS)

1997-02-01

The function of SITE-94 is to provide the Swedish Nuclear Power Inspectorate (SKI) with the capacity and supporting knowledge needed for reviewing the Swedish nuclear industry's R and D programs and for reviewing license applications, as stipulated in Swedish legislation. The report is structured as a Performance Assessment exercise needed for input to decisions regarding repository safety, but the SITE-94 is neither a safety assessment nor a model for future assessments to be undertaken by the prospective licensee. The specific project objectives of SITE-94 comprise site evaluation, performance assessment methodology, canister integrity and radionuclide release and transport calculations. The main report (SKI-R--96-36) gives a detailed description of the many inter-related studies undertaken as part of the research project, while the present report presents a condensed summary of the main report. 46 refs

"Doing Geography": Evaluating an Independent Geographic Inquiry Assessment Task in an Initial Teacher Education Program

Science.gov (United States)

Harte, Wendy; Reitano, Paul

2016-01-01

The assessment task of the final course in a bachelor of secondary education program is examined for opportunities for preservice geography teachers to achieve the course aims of integrating, consolidating, applying, and reflecting on the knowledge and skills they have learned during their initial teacher education program. The results show that…

Tailored model abstraction in performance assessments

International Nuclear Information System (INIS)

Kessler, J.H.

1995-01-01

Total System Performance Assessments (TSPAs) are likely to be one of the most significant parts of making safety cases for the continued development and licensing of geologic repositories for the disposal of spent fuel and HLW. Thus, it is critical that the TSPA model capture the 'essence' of the physical processes relevant to demonstrating the appropriate regulation is met. But how much detail about the physical processes must be modeled and understood before there is enough confidence that the appropriate essence has been captured? In this summary the level of model abstraction that is required is discussed. Approaches for subsystem and total system performance analyses are outlined, and the role of best estimate models is examined. It is concluded that a conservative approach for repository performance, based on limited amount of field and laboratory data, can provide sufficient confidence for a regulatory decision

Branch technical position for performance assessment of low-level radioactive waste disposal facilities

International Nuclear Information System (INIS)

Campbell, A.C.; Abramson, L.; Byrne, R.M.

1994-01-01

The U.S. Nuclear Regulatory Commission has developed a Draft Branch Technical Position on Performance Assessment of Low-Level Radioactive Waste Disposal Facilities. The draft technical position addresses important issues in performance assessment modeling and provides a framework and technical basis for conducting and evaluating performance assessments in a disposal facility license application. The technical position also addresses specific technical policy issues and augments existing NRC guidance pertaining to LLW performance assessment

Engaging the expert in public dialogue: Developing the role of performance assessment

International Nuclear Information System (INIS)

Littleboy, Anna; Hodgkinson, David

2001-01-01

Participatory approaches to decision-making call for two-way dialogue with a wide range of stakeholders. In the United Kingdom, probabilistic performance assessments of a potential deep geological disposal facility have typically been undertaken by experts to meet regulations set by other experts. However, there is potential for performance assessments to fulfil the additional role of enabling dialogue with other stakeholder groups. This paper suggests developments in the focus and presentation of performance assessments to foster such dialogue. It reflects issues relevant to performance assessment that arise as waste management organisations consider the consequences of involving wider stakeholder groups in decision making about repository development

Engaging the expert in public dialogue: Developing the role of performance assessment

Energy Technology Data Exchange (ETDEWEB)

Littleboy, Anna [United Kingdom Nirex Ltd., Harwell (United Kingdom); Hodgkinson, David [Quintessa Ltd., Henley-on-Thames (United Kingdom)

2001-07-01

Participatory approaches to decision-making call for two-way dialogue with a wide range of stakeholders. In the United Kingdom, probabilistic performance assessments of a potential deep geological disposal facility have typically been undertaken by experts to meet regulations set by other experts. However, there is potential for performance assessments to fulfil the additional role of enabling dialogue with other stakeholder groups. This paper suggests developments in the focus and presentation of performance assessments to foster such dialogue. It reflects issues relevant to performance assessment that arise as waste management organisations consider the consequences of involving wider stakeholder groups in decision making about repository development.

Impact of Reduction Parameters on the Initial Performance and Stability of Ni/(Sc)YSZ Cermet Anodes for SOFCs

DEFF Research Database (Denmark)

Ebbehøj, Søren Lyng; Ramos, Tania; Mogensen, Mogens Bjerg

2012-01-01

In-situ reduction of Ni cermet anodes produces the porosity and influences the microstructure, performance and stability of the anodes. The impact on initial performance, stability and microstructure of two different reduction procedures currently in use at DTU Energy Conversion with reduction...

Assessing Performance and Learning in Interprofessional Health Care Teams.

Science.gov (United States)

Ekmekci, Ozgur; Sheingold, Brenda; Plack, Margaret; LeLacheur, Susan; Halvaksz, Jennifer; Lewis, Karen; Schlumpf, Karen; Greenberg, Larrie

2015-01-01

Teamwork has become an integral part of health care delivery. Such emphasis on teamwork has generated the need to systematically measure and improve the learning and performance of health care teams. The purpose of this study was to develop a comprehensive assessment instrument, the Interprofessional Education and Practice Inventory (IPEPI), to evaluate learning and performance in interprofessional health care teams. The 12-month study commenced in three 4-month phases: (1) a panel of 25 national and international experts participated in the Delphi process to identify factors influencing team learning and team performance; (2) the research team analyzed the findings from the two Delphi rounds to develop the IPEPI; and (3) a cohort of 27 students at the university engaged in clinical simulations to test and refine the IPEPI. Findings suggest key factors that significantly influence team learning and performance include whether the group is able to foster a climate of mutual respect, adopt effective communication strategies, develop a sense of trust, and invite contributions from others. Additionally, in assessing organizational factors, participants indicated those factors that significantly influence team learning and performance include whether the organization is patient-centered, creates a culture of safety (not blame), and supports individual and team learning. These findings highlight the critical role assessment plays in enhancing not just interprofessional education or interprofessional practice, but in essence advancing interprofessional education and practice--which requires an integrated examination of how health care professionals learn and perform in teams.

Drawing students' attention to relevant assessment criteria: effects on self-assessment skills and performance

NARCIS (Netherlands)

Fastré, Greet; Van der Klink, Marcel; Sluijsmans, Dominique; Van Merriënboer, Jeroen

2012-01-01

Fastré, G. M. J., Van der Klink, M. R., Sluijsmans, D., & Van Merriënboer, J. J. G. (2012). Drawing students’ attention to relevant assessment criteria: effects on self-assessment skills and performance. Journal of Vocational Education & Training, 64(2), 185-198. doi:10.1080/13636820.2011.630537

DEVELOPMENT OF PERFORMANCE ASSESSMENT INSTRUMENT FOR NURSES BASED ON WEB IN INPATIENT UNIT

Directory of Open Access Journals (Sweden)

Aprilia Nuryanti

2017-06-01

Full Text Available Introduction: Performance assessment instrument will be problematic when it is not representative in describing the competency because it is not obvious indicators and inappropriate performance standard to nursing’s task. The purpose of this study is to develop nurses’ performance assessment instrument based on the web from multi sources assessment inpatient unit at SMC Hospital. Methods: This study had two phases. The first phase was an explanatory overview of the performance assessment system using questionnaires completed by 53 respondents of nurses, selected by purposive sampling. Instrument development based on FGD with six decision makers in the hospital. Validity was tested by Pearson Product Moment Correlation and reliability of instrument’s was tested by alpha Cronbach. The second phase was socialization and instrument test to observe the quality of instrument using a questionnaire by 47 respondents and recommendations made by 8 participants of FGD. The samples were selected by purposive sampling technique. Performance assessment system was moderate at 58.49%. All questions which aimed to measure the performance of nurses were valid and reliable. The quality of nurses’ performance assessment instruments based on the web was a good category, which was functionality: 81.60; reliability: 78.16; efficiency: 80.85; usability: 81.70 and portability: 81.70. Results: The result was a web-based assessment format, scoring with Likert scale, resource assessment by the direct supervisor which was a multisource evaluator, the development of performance graph, and confidentiality of data on the database server. Discussion: Recommendations for hospital is to make policy based on the final value of the performance assessment by the supervisor which was multisource feedback and it needs a global writing on a form of performance assessment result.

Sensitivity Analysis of FEAST-Metal Fuel Performance Code: Initial Results

International Nuclear Information System (INIS)

Edelmann, Paul Guy; Williams, Brian J.; Unal, Cetin; Yacout, Abdellatif

2012-01-01

This memo documents the completion of the LANL milestone, M3FT-12LA0202041, describing methodologies and initial results using FEAST-Metal. The FEAST-Metal code calculations for this work are being conducted at LANL in support of on-going activities related to sensitivity analysis of fuel performance codes. The objective is to identify important macroscopic parameters of interest to modeling and simulation of metallic fuel performance. This report summarizes our preliminary results for the sensitivity analysis using 6 calibration datasets for metallic fuel developed at ANL for EBR-II experiments. Sensitivity ranking methodology was deployed to narrow down the selected parameters for the current study. There are approximately 84 calibration parameters in the FEAST-Metal code, of which 32 were ultimately used in Phase II of this study. Preliminary results of this sensitivity analysis led to the following ranking of FEAST models for future calibration and improvements: fuel conductivity, fission gas transport/release, fuel creep, and precipitation kinetics. More validation data is needed to validate calibrated parameter distributions for future uncertainty quantification studies with FEAST-Metal. Results of this study also served to point out some code deficiencies and possible errors, and these are being investigated in order to determine root causes and to improve upon the existing code models.

Assessment of field training for nuclear operations personnel

International Nuclear Information System (INIS)

White, M.

1995-08-01

Training of station personnel is an important component of the safe operation of the nuclear generating station. On-the-job training (OJT) is an important component of training. The AECB initiated this project to develop a process to assess the effectiveness of OJT for field operators, and perform an initial trial of the developed process. This report describes the recommended process to assess the effectiveness of OJT for field operators, as well as the results of the initial assessment at Pickering Nuclear Generating Station. The assessment's conclusions included: (1) Ontario Hydro policies and procedures are generally consistent with industry guidelines requiring a systematic approach to training; (2) Pickering NGS field operator performance is not always consistent with documented station requirements and standards, nor industry guidelines and practices; and (3) The Pickering NGS field operator on-the-job training is not consistent with a systematic approach to training, a requirement recognized in Ontario Hydro's Policy NGD 113, and does not contribute to a high level of performance in field operator tasks. Recommendations are made regarding the use of the developed process for future assessments of on-the-job training at nuclear power plants. (author). 36 refs., 4 tabs., 3 figs

Initiating Event Analysis of a Lithium Fluoride Thorium Reactor

Science.gov (United States)

Geraci, Nicholas Charles

The primary purpose of this study is to perform an Initiating Event Analysis for a Lithium Fluoride Thorium Reactor (LFTR) as the first step of a Probabilistic Safety Assessment (PSA). The major objective of the research is to compile a list of key initiating events capable of resulting in failure of safety systems and release of radioactive material from the LFTR. Due to the complex interactions between engineering design, component reliability and human reliability, probabilistic safety assessments are most useful when the scope is limited to a single reactor plant. Thus, this thesis will study the LFTR design proposed by Flibe Energy. An October 2015 Electric Power Research Institute report on the Flibe Energy LFTR asked "what-if?" questions of subject matter experts and compiled a list of key hazards with the most significant consequences to the safety or integrity of the LFTR. The potential exists for unforeseen hazards to pose additional risk for the LFTR, but the scope of this thesis is limited to evaluation of those key hazards already identified by Flibe Energy. These key hazards are the starting point for the Initiating Event Analysis performed in this thesis. Engineering evaluation and technical study of the plant using a literature review and comparison to reference technology revealed four hazards with high potential to cause reactor core damage. To determine the initiating events resulting in realization of these four hazards, reference was made to previous PSAs and existing NRC and EPRI initiating event lists. Finally, fault tree and event tree analyses were conducted, completing the logical classification of initiating events. Results are qualitative as opposed to quantitative due to the early stages of system design descriptions and lack of operating experience or data for the LFTR. In summary, this thesis analyzes initiating events using previous research and inductive and deductive reasoning through traditional risk management techniques to

Initial performance of corn in response to treatment of seeds with humic acids isolated from bokashi

Directory of Open Access Journals (Sweden)

Marihus Altoé Baldotto

2016-02-01

Full Text Available ABSTRACT The humified organic matter presents bioactivity similar to the auxinic effect. As bokashi is produced by a special process of humification, information is needed about the bioactive potential of its humic acids. The objective of this work was studying the initial performance of corn-indicator plants in response to the application of different concentrations of humic acids isolated from bokashi. The corn seeds were treated for 16 hours with solutions containing 0, 10, 20, 30, 40 and 80 mmol L-1 of C in the form of humic acids. Then, the seeds were planted in pots of 1 dm3 containing corrected and fertilized soil, in greenhouse. Growth characteristics of shoot and root systems were evaluated. The results showed that the humic acids extracted from bokashi had positive effects on the initial performance of corn.

Development and Initial Psychometric Assessment of the Plant Attitude Questionnaire

Science.gov (United States)

Fančovičová, Jana; Prokop, Pavol

2010-10-01

Plants are integral parts of ecosystems which determine life on Earth. People's attitudes toward them are however, largely overlooked. Here we present initial psychometric assessment of self-constructed Plant Attitude Scale (PAS) that was administered to a sample of 310 Slovakian students living in rural areas aged 10-15 years. The final version of PAS consists from 29 Likert-scale items that were loaded to four distinct dimensions (Interest, Importance, Urban trees and Utilization). Mean scores revealed that Slovakian students lack positive attitudes toward plants and that gender had no effect on their mean attitude scores. Living in a family with a garden was associated with a more positive attitude toward plants. Further correlative research on diverse samples containing urban children and experimental research examining the impact of gardening in schools on student attitudes toward plants is required.

Comparative values of medical school assessments in the prediction of internship performance.

Science.gov (United States)

Lee, Ming; Vermillion, Michelle

2018-02-01

Multiple undergraduate achievements have been used for graduate admission consideration. Their relative values in the prediction of residency performance are not clear. This study compared the contributions of major undergraduate assessments to the prediction of internship performance. Internship performance ratings of the graduates of a medical school were collected from 2012 to 2015. Hierarchical multiple regression analyses were used to examine the predictive values of undergraduate measures assessing basic and clinical sciences knowledge and clinical performances, after controlling for differences in the Medical College Admission Test (MCAT). Four hundred eighty (75%) graduates' archived data were used in the study. Analyses revealed that clinical competencies, assessed by the USMLE Step 2 CK, NBME medicine exam, and an eight-station objective structured clinical examination (OSCE), were strong predictors of internship performance. Neither the USMLE Step 1 nor the inpatient internal medicine clerkship evaluation predicted internship performance. The undergraduate assessments as a whole showed a significant collective relationship with internship performance (ΔR 2  = 0.12, p < 0.001). The study supports the use of clinical competency assessments, instead of pre-clinical measures, in graduate admission consideration. It also provides validity evidence for OSCE scores in the prediction of workplace performance.

Using the Malcolm Baldrige "are we making progress" survey for organizational self-assessment and performance improvement.

Science.gov (United States)

Shields, Judith A; Jennings, Jerry L

2013-01-01

A national healthcare company applied the Malcolm Baldrige Criteria for Performance Excellence and its "Are We Making Progress?" survey as an annual organizational self-assessment to identify areas for improvement. For 6 years, Liberty Healthcare Corporation reviewed the survey results on an annual basis to analyze positive and negative trends, monitor company progress toward targeted goals and develop new initiatives to address emerging areas for improvement. As such, the survey provided a simple and inexpensive methodology to gain useful information from employees at all levels and from multiple service sites and business sectors. In particular, it provided a valuable framework for assessing and improving the employees' commitment to the company's mission and values, high standards and ethics, quality of work, and customer satisfaction. The methodology also helped the company to incorporate the philosophy and principles of continuous quality improvement in a unified fashion. Corporate and local leadership used the same measure to evaluate the performance of individual programs relative to each other, to the company as a whole, and to the "best practices" standard of highly successful companies that received the Malcolm Baldrige National Quality Award. © 2012 National Association for Healthcare Quality.

The development and status of performance assessment in radioactive waste disposal

International Nuclear Information System (INIS)

McCombie, C.; Papp, T.; Coplan, S.

1990-01-01

The development of formal performance assessment in radioactive waste disposal has been in progress for around 10-15 years now. The time is particularly opportune for a review of the state-of-the-art because of current changes in the status of repository planning and implementation world-wide. Several major feasibility-type studies have been completed, the first full site-specific safety analyses are being performed for engineered underground disposal facilities for L/ILW, and - for HLW - the die are now being cast by implementers and regulators determining how the safety analyses for licensing are to be performed and assessed. This introductory paper reviews the development of performance assessment, including a reiteration of the aims and a recapitulation of the technical progress and achievements to date. The most important purpose, however, is to identify some key issues occupying safety analysts and regulatory reviewers involved in waste disposal today. The objective is to present the generally accepted consensus on the state of the art in performance assessment. 40 refs., 2 figs

Children-Engaging Social and Environmental Initiatives as Determinants of Corporate Reputation

Directory of Open Access Journals (Sweden)

Ingrida Smaiziene

2016-02-01

Full Text Available Objective:  The paper aims to explore children-engaging social and green initiatives as determinants of corporate reputation.  Research Design & Methods: The research data were collected by means of a consumer survey (n=354 in Lithuania. During the research, consumers’ perception and attitudes towards companies which take children-engaging social and environmental initiatives were surveyed. Findings: The research findings indicate that consumers tend to agree that companies implementing children-engaging CSR initiatives contribute to the development of children as responsible citizens. However, consumers have a different attitude towards companies which implement children-engaging environmental initiatives and companies which take children-engaging social initiatives.  Implications & Recommendations: The research results suggest that consumers form opinions about the company not only by assessing the company’s behaviour towards them, but also by assessing the corporate performance targeted at children. Therefore, companies should consider children-engaging CSR as determinants of corporate reputation. Contribution & Value Added: The paper provides some empirical evidence on how CSR practices targeted at children may affect corporate reputation.

77 FR 60124 - Draft Guidance for Industry on Initial Completeness Assessments for Type II Active Pharmaceutical...

Science.gov (United States)

2012-10-02

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-D-1010] Draft Guidance for Industry on Initial Completeness Assessments for Type II Active Pharmaceutical... certain drug master files, namely, Type II active pharmaceutical ingredient (API) drug master files (DMFs...

Performance of GPS-devices for environmental exposure assessment.

Science.gov (United States)

Beekhuizen, Johan; Kromhout, Hans; Huss, Anke; Vermeulen, Roel

2013-01-01

Integration of individual time-location patterns with spatially resolved exposure maps enables a more accurate estimation of personal exposures to environmental pollutants than using estimates at fixed locations. Current global positioning system (GPS) devices can be used to track an individual's location. However, information on GPS-performance in environmental exposure assessment is largely missing. We therefore performed two studies. First, a commute-study, where the commute of 12 individuals was tracked twice, testing GPS-performance for five transport modes and two wearing modes. Second, an urban-tracking study, where one individual was tracked repeatedly through different areas, focused on the effect of building obstruction on GPS-performance. The median error from the true path for walking was 3.7 m, biking 2.9 m, train 4.8 m, bus 4.9 m, and car 3.3 m. Errors were larger in a high-rise commercial area (median error=7.1 m) compared with a low-rise residential area (median error=2.2 m). Thus, GPS-performance largely depends on the transport mode and urban built-up. Although ~85% of all errors were 50 m. Modern GPS-devices are useful tools for environmental exposure assessment, but large GPS-errors might affect estimates of exposures with high spatial variability.

Total System Performance Assessment: Enhanced Design Alternative V

International Nuclear Information System (INIS)

N. Erb; S. Miller; V. Vallikat

1999-01-01

This calculation documents the total system performance assessment modeling of Enhanced Design Analysis (EDA) V. EDA V is based on the TSPA-VA base design which has been modified with higher thermal loading, a quartz sand invert, and line loading with 21 PWR waste packages that have 2-cm thick titanium grade 7 corrosion resistance material (CRM) drip shields placed over dual-layer waste packages composed of 'inside out' VA reference material (CRWMS M and O 1999a). This document details the changes and assumptions made to the VA reference Performance Assessment Model (CRWMS M and O 1998a) to incorporate the design changes detailed for EDA V. The performance measure for this evaluation is expected value dose-rate history. Time histories of dose rate are presented for EDA V and a Defense in Depth (DID) analysis base on EDA V. Additional details concerning the Enhanced Design Alternative II are provided in the 'LADS 3-12 Requests' interoffice correspondence (CRWMS M and O 1999a)

Assessing the Performance of Business Unit Managers

NARCIS (Netherlands)

Bouwens, J.F.M.G.; van Lent, L.A.G.M.

2006-01-01

Using a sample of 140 managers, we investigate the use of various performance metrics in determining the periodic assessment, bonus decisions, and career paths of business unit managers.We show that the weight on accounting return measures is associated with the authority of these managers, and we

An importance-performance assessment of delegates' satisfaction ...

African Journals Online (AJOL)

An importance-performance assessment of delegates' satisfaction with the catering component of courses offered by continuing education at the University of ... of its catering component, a company would be able to make appropriate and necessary managerial decisions in order to retain and expand its customer base.

Guidelines for radiological performance assessment of DOE low-level radioactive waste disposal sites

International Nuclear Information System (INIS)

Case, M.J.; Otis, M.D.

1988-07-01

This document provides guidance for conducting radiological performance assessments of Department of Energy (DOE) low-level radioactive waste (LLW) disposal facilities. The guidance is specifically intended to provide the fundamental approach necessary to meet the performance assessment requirements. The document is written for LLW facility operators or other personnel who will manage the performance assessment task. The document is meant to provide guidance for conducting performance assessments in a generally consistent manner at all DOE LLW disposal facilities. The guidance includes a summary of performance objectives to be met by LLW disposal facilities (these objectives are derived from current DOE and other applicable federal regulatory guidelines); specific criteria for an adequate performance assessment and from which a minimum set of required calculations may be determined; recommendations of methods for screening critical components of the analysis system so that these components can be addressed in detail; recommendations for the selection of existing models and the development of site-specific models; recommendations of techniques for comparison of assessment results with performance objectives; and a summary of reporting requirements

Effect of Engaging Trainees by Assessing Peer Performance

DEFF Research Database (Denmark)

Loumann Krogh, Charlotte; Ringsted, Charlotte; Kromann, Charles B

2014-01-01

during training. Outcome measures were in-training performance and performance, both of which were measured two weeks after the course. Trainees' performances were videotaped and assessed by two expert raters using a checklist that included a global rating. Trainees' satisfaction with the training...... was also evaluated. RESULTS: The intervention group obtained a significantly higher overall in-training performance score than the control group: mean checklist score 20.87 (SD 2.51) versus 19.14 (SD 2.65) P = 0.003 and mean global rating 3.25 SD (0.99) versus 2.95 (SD 1.09) P = 0.014. Postcourse...

Migration case studies and the implications of humic substances for the radiological performance assessment of radioactive waste repositories

International Nuclear Information System (INIS)

Bryan, N.D.; Bernhard, G.; Geipel, G.; Heise, K.H.; Schmeide, K.; Benes, P.

2005-01-01

Using the information obtained during the experimental and modelling tasks a series of migration case studies have been performed. These are not full performance assessment studies, but are merely intended to demonstrate the likely impact of humic substances upon the migration of radionuclides in the environment. Three separate sites have been investigated: (i) a shallow waste repository site at Dukovany in the Czech Republic; (ii) the formerly proposed, but now withdrawn, waste repository site at Gorleben in Germany; (iii) a large rock pile, consisting of tailings from a uranium mine, Schlema Alberode, near Dresden, Germany. To provide the maximum information, a variety of 'release scenarios' have been defined: continuous leakage in the Dukovany case study; a short pulsed release at Gorleben, and steady leaching in the case of the rock pile. The effects of the magnitudes of the chemical rate constants have been studied along with the effects of the initial distribution between exchangeable and non-exchangeable. Further, modelling during the HUPA project has shown that in certain lab column experiments the sorption of humic and humic-radionuclide complexes onto mineral surfaces could have an impact upon migration. Therefore, the likely impact of these processes on the field scale was investigated. In each of the three cases, humics are predicted to have a significant impact upon migration. However, whereas for the repository cases, it is the presence of the non-exchangeable fraction that results in migration, and the exchangeable fraction plays no significant part in transport, for the rock pile, the model predicts that the humic should promote migration even with the exchangeable interaction alone. Humic sorption may affect the degree of migration, but even in the case of maximum impact, the net effect of humic substances is still to enhance migration significantly. In fact, the initial distribution of radionuclide upon entry to the far-field is much more

Assessment of field training for nuclear operations personnel

Energy Technology Data Exchange (ETDEWEB)

White, M [Safety Management Services, Inc. (Canada)

1995-08-01

Training of station personnel is an important component of the safe operation of the nuclear generating station. On-the-job training (OJT) is an important component of training. The AECB initiated this project to develop a process to assess the effectiveness of OJT for field operators, and perform an initial trial of the developed process. This report describes the recommended process to assess the effectiveness of OJT for field operators, as well as the results of the initial assessment at Pickering Nuclear Generating Station. The assessment`s conclusions included: (1) Ontario Hydro policies and procedures are generally consistent with industry guidelines requiring a systematic approach to training; (2) Pickering NGS field operator performance is not always consistent with documented station requirements and standards, nor industry guidelines and practices; and (3) The Pickering NGS field operator on-the-job training is not consistent with a systematic approach to training, a requirement recognized in Ontario Hydro`s Policy NGD 113, and does not contribute to a high level of performance in field operator tasks. Recommendations are made regarding the use of the developed process for future assessments of on-the-job training at nuclear power plants. (author). 36 refs., 4 tabs., 3 figs.

Development of performance assessment instrument based contextual learning for measuring students laboratory skills

Science.gov (United States)

Susilaningsih, E.; Khotimah, K.; Nurhayati, S.

2018-04-01

The assessment of laboratory skill in general hasn’t specific guideline in assessment, while the individual assessment of students during a performance and skill in performing laboratory is still not been observed and measured properly. Alternative assessment that can be used to measure student laboratory skill is use performance assessment. The purpose of this study was to determine whether the performance assessment instrument that the result of research can be used to assess basic skills student laboratory. This research was conducted by the Research and Development. The result of the data analysis performance assessment instruments developed feasible to implement and validation result 62.5 with very good categories for observation sheets laboratory skills and all of the components with the very good category. The procedure is the preliminary stages of research and development stages. Preliminary stages are divided in two, namely the field studies and literature studies. The development stages are divided into several parts, namely 1) development of the type instrument, 2) validation by an expert, 3) a limited scale trial, 4) large-scale trials and 5) implementation of the product. The instrument included in the category of effective because 26 from 29 students have very high laboratory skill and high laboratory skill. The research of performance assessment instrument is standard and can be used to assess basic skill student laboratory.

Getting off on the Wrong Foot: Longitudinal Effects of Hispanic Students' Stability Attributions Following Poor Initial Test Performance

Science.gov (United States)

Cox, Cody B.; Yang, Yan

2012-01-01

Though studies have established that following poor performance, attributions to stable causes affect the performance of minority students, few studies have explored the impact of stability attributions over time. This study explored attributions following initial failure among a predominantly Hispanic student population. We measured students'…

The assessment and treatment of performance anxiety in musicians.

Science.gov (United States)

Clark, D B; Agras, W S

1991-05-01

Performance anxiety in musicians may be severe enough to require intervention but has been the subject of relatively little clinical research. The authors' objectives were to describe the results of a comprehensive clinical and laboratory assessment and to perform a double-blind, placebo-controlled study comparing buspirone, cognitive-behavior therapy, and the combination of these treatments for performance anxiety. Ninety-four subjects were recruited by mass media announcements and were seen in a university-based outpatient psychiatric clinic. Assessments were 1) questionnaires for all 94 subjects, 2) diagnostic interview of 50 subjects, and 3) laboratory performance of 34 subjects. Treatment conditions were 1) 6 weeks of buspirone, 2) 6 weeks of placebo, 3) a five-session, group cognitive-behavior therapy program with buspirone, or 4) the cognitive-behavior therapy program with placebo. Treatment outcome measures included subjective anxiety ratings and heart rate measures during a laboratory performance, a questionnaire measure of performance confidence, and a blind rating of musical performance quality. All subjects fulfilled criteria for DSM-III-R social phobia. Of the 15 full-time professional musicians, ten had tried propranolol and three had stopped performing. Most of the subjects had substantial anxiety and heart rate increases during laboratory speech and musical performances. Cognitive-behavior therapy resulted in statistically significant reductions in subjective anxiety, improved quality of musical performance, and improved performance confidence. Buspirone was not an effective treatment. Cognitive-behavior therapy is a viable treatment approach for performance anxiety in musicians.

Assessment of stainless steel 348 fuel rod performance against literature available data using TRANSURANUS code

Directory of Open Access Journals (Sweden)

Giovedi Claudia

2016-01-01

Full Text Available Early pressurized water reactors were originally designed to operate using stainless steel as cladding material, but during their lifetime this material was replaced by zirconium-based alloys. However, after the Fukushima Daiichi accident, the problems related to the zirconium-based alloys due to the hydrogen production and explosion under severe accident brought the importance to assess different materials. In this sense, initiatives as ATF (Accident Tolerant Fuel program are considering different material as fuel cladding and, one candidate is iron-based alloy. In order to assess the fuel performance of fuel rods manufactured using iron-based alloy as cladding material, it was necessary to select a specific stainless steel (type 348 and modify properly conventional fuel performance codes developed in the last decades. Then, 348 stainless steel mechanical and physics properties were introduced in the TRANSURANUS code. The aim of this paper is to present the obtained results concerning the verification of the modified TRANSURANUS code version against data collected from the open literature, related to reactors which operated using stainless steel as cladding. Considering that some data were not available, some assumptions had to be made. Important differences related to the conventional fuel rods were taken into account. Obtained results regarding the cladding behavior are in agreement with available information. This constitutes an evidence of the modified TRANSURANUS code capabilities to perform fuel rod investigation of fuel rods manufactured using 348 stainless steel as cladding material.