WorldWideScience

Sample records for information operations analysis

  1. Meeting the reactor operator's information needs using functional analysis

    International Nuclear Information System (INIS)

    Nelson, W.R.; Clark, M.T.

    1980-01-01

    Since the accident at Three Mile Island, many ideas have been proposed for assisting the reactor operator during emergency situations. However, some of the suggested remedies do not alleviate an important shortcoming of the TMI control room: the operators were not presented with the information they needed in a manner which would allow prompt diagnosis of the problem. To address this problem, functional analysis is being applied at the LOFT facility to ensure that the operator's information needs are being met in his procedures and graphic displays. This paper summarizes the current applications of functional analysis at LOFT

  2. Army Information Operations Officer Needs Analysis Report

    Science.gov (United States)

    2016-03-01

    helping with formatting the final report iv ARMY INFORMATION OPERATIONS OFFICER NEEDS ANALYSIS REPORT EXECUTIVE SUMMARY Research...time.” One IO officer suggested the IPO try to get a access the database that has all the old APA reports archived as a way to look at assessment

  3. Event Sequence Analysis of the Air Intelligence Agency Information Operations Center Flight Operations

    National Research Council Canada - National Science Library

    Larsen, Glen

    1998-01-01

    This report applies Event Sequence Analysis, methodology adapted from aircraft mishap investigation, to an investigation of the performance of the Air Intelligence Agency's Information Operations Center (IOC...

  4. Information Operations - Analysis Support and Capability Requirements (Operations d'information - Soutien a l'analyse et exigences de capacites) (CD-ROM)

    National Research Council Canada - National Science Library

    2006-01-01

    ...: The focus of the study "Information Operations - Analysis Support and Capability Requirements" undertaken by the RTO Task Group SAS-057 was to provide recommendations to improve analysis support...

  5. Meeting the reactor operator's information needs using functional analysis

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, W.R.; Clark, M.T.

    1980-01-01

    Since the accident at Three Mile Island, many ideas have been proposed for assisting the reactor operator during emergency situations. However, some of the suggested remedies do not alleviate an important shortcoming of the TMI control room: the operators were not presented with the information they needed in a manner which would allow prompt diagnosis of the problem. To address this problem, functional analysis is being applied at the LOFT facility to ensure that the operator's information needs are being met in his procedures and graphic displays. This paper summarizes the current applications of functional analysis at LOFT.

  6. Analysis of Informal Credit Operations among Farmers In Atisbo ...

    African Journals Online (AJOL)

    Analysis of Informal Credit Operations among Farmers In Atisbo Local ... Some of the respondents (16.7%) had no formal education though they were managing ... Intensive use of extension services to facilitate adult literacy and learning ...

  7. The concept of information support system for operational personnel of operating NPPs

    International Nuclear Information System (INIS)

    Dunaev, V.G.; Golovanov, V.V.

    1993-01-01

    The paper has been prepared on the materials of the concept developed by the order of ''Rosenergoatom'' concern. In the present paper the main definitions, the principal objectives and functions of the operator support system (OSS) are stated, a brief analysis of operation features of some existing operator information systems is presented, the main trends of development of operator information support system are given, the way and the sequence for implementation of the systems for operating NPPs are reviewed. In this proposed concept in the first place are considered the information support systems for the operators of the power unit main control rooms, however, the presented principles may be applied while designing information support systems for operators of other control rooms of NPP. 4 refs

  8. Occurrence reporting and processing of operations information

    International Nuclear Information System (INIS)

    1997-01-01

    DOE O 232.1A, Occurrence Reporting and Processing of Operations Information, and 10 CFR 830.350, Occurrence Reporting and Processing of Operations Information (when it becomes effective), along with this manual, set forth occurrence reporting requirements for Department of Energy (DOE) Departmental Elements and contractors responsible for the management and operation of DOE-owned and -leased facilities. These requirements include categorization of occurrences related to safety, security, environment, health, or operations (''Reportable Occurrences''); DOE notification of these occurrences; and the development and submission of documented follow-up reports. This Manual provides detailed information for categorizing and reporting occurrences at DOE facilities. Information gathered by the Occurrence Reporting and processing System is used for analysis of the Department's performance in environmental protection, safeguards and security, and safety and health of its workers and the public. This information is also used to develop lessons learned and document events that significantly impact DOE operations

  9. Occurrence reporting and processing of operations information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-21

    DOE O 232.1A, Occurrence Reporting and Processing of Operations Information, and 10 CFR 830.350, Occurrence Reporting and Processing of Operations Information (when it becomes effective), along with this manual, set forth occurrence reporting requirements for Department of Energy (DOE) Departmental Elements and contractors responsible for the management and operation of DOE-owned and -leased facilities. These requirements include categorization of occurrences related to safety, security, environment, health, or operations (``Reportable Occurrences``); DOE notification of these occurrences; and the development and submission of documented follow-up reports. This Manual provides detailed information for categorizing and reporting occurrences at DOE facilities. Information gathered by the Occurrence Reporting and processing System is used for analysis of the Department`s performance in environmental protection, safeguards and security, and safety and health of its workers and the public. This information is also used to develop lessons learned and document events that significantly impact DOE operations.

  10. Using social network analysis and agent-based modelling to explore information flow using common operational pictures for maritime search and rescue operations.

    Science.gov (United States)

    Baber, C; Stanton, N A; Atkinson, J; McMaster, R; Houghton, R J

    2013-01-01

    The concept of common operational pictures (COPs) is explored through the application of social network analysis (SNA) and agent-based modelling to a generic search and rescue (SAR) scenario. Comparing the command structure that might arise from standard operating procedures with the sort of structure that might arise from examining information-in-common, using SNA, shows how one structure could be more amenable to 'command' with the other being more amenable to 'control' - which is potentially more suited to complex multi-agency operations. An agent-based model is developed to examine the impact of information sharing with different forms of COPs. It is shown that networks using common relevant operational pictures (which provide subsets of relevant information to groups of agents based on shared function) could result in better sharing of information and a more resilient structure than networks that use a COP. SNA and agent-based modelling are used to compare different forms of COPs for maritime SAR operations. Different forms of COP change the communications structures in the socio-technical systems in which they operate, which has implications for future design and development of a COP.

  11. Display analysis with the optimal control model of the human operator. [pilot-vehicle display interface and information processing

    Science.gov (United States)

    Baron, S.; Levison, W. H.

    1977-01-01

    Application of the optimal control model of the human operator to problems in display analysis is discussed. Those aspects of the model pertaining to the operator-display interface and to operator information processing are reviewed and discussed. The techniques are then applied to the analysis of advanced display/control systems for a Terminal Configured Vehicle. Model results are compared with those obtained in a large, fixed-base simulation.

  12. OPERATIONS RESEARCH IN THE DESIGN OF MANAGEMENT INFORMATION SYSTEMS

    Science.gov (United States)

    management information systems is concerned with the identification and detailed specification of the information and data processing...of advanced data processing techniques in management information systems today, the close coordination of operations research and data systems activities has become a practical necessity for the modern business firm.... information systems in which mathematical models are employed as the basis for analysis and systems design. Operations research provides a

  13. A qualitative content analysis of global health engagements in Peacekeeping and Stability Operations Institute's stability operations lessons learned and information management system.

    Science.gov (United States)

    Nang, Roberto N; Monahan, Felicia; Diehl, Glendon B; French, Daniel

    2015-04-01

    Many institutions collect reports in databases to make important lessons-learned available to their members. The Uniformed Services University of the Health Sciences collaborated with the Peacekeeping and Stability Operations Institute to conduct a descriptive and qualitative analysis of global health engagements (GHEs) contained in the Stability Operations Lessons Learned and Information Management System (SOLLIMS). This study used a summative qualitative content analysis approach involving six steps: (1) a comprehensive search; (2) two-stage reading and screening process to identify first-hand, health-related records; (3) qualitative and quantitative data analysis using MAXQDA, a software program; (4) a word cloud to illustrate word frequencies and interrelationships; (5) coding of individual themes and validation of the coding scheme; and (6) identification of relationships in the data and overarching lessons-learned. The individual codes with the most number of text segments coded included: planning, personnel, interorganizational coordination, communication/information sharing, and resources/supplies. When compared to the Department of Defense's (DoD's) evolving GHE principles and capabilities, the SOLLIMS coding scheme appeared to align well with the list of GHE capabilities developed by the Department of Defense Global Health Working Group. The results of this study will inform practitioners of global health and encourage additional qualitative analysis of other lessons-learned databases. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.

  14. INFORMATION ASSURANCE - INTELLIGENCE - INFORMATION SUPERIORITY RELATIONSHIP WITHIN NATO OPERATIONS

    Directory of Open Access Journals (Sweden)

    Gheorghe BOARU, Ioan-Mihai ILIEŞ

    2011-01-01

    Full Text Available There is a tight relationship between information assurance, the intelligence cycle and information superiority within NATO operations. The intelligence cycle has a discrete architecture and provides on-time and relevant intelligence products to the joint force commanders and to other authorized users in a specifi c joint area of operations. The intelligence cycle must follow the evolution of the operation. A permanent intelligence estimate will be performed during the military decision making process and operations execution. Information superiority is one of the most powerful intelligence cycle achievements. and decisively infuences the success of NATO joint operations. Information superiority must be preserved and enhanced through information assurance. Information assurance is an information operation that must be planned by the military in charge of operation security or by non-military experts, executed by all personnel during the entire intelligence cycle life time and employed during the planning and execution of NATO joint operations.

  15. CMS analysis operations

    International Nuclear Information System (INIS)

    Andreeva, J; Maier, G; Spiga, D; Calloni, M; Colling, D; Fanzago, F; D'Hondt, J; Maes, J; Van Mulders, P; Villella, I; Klem, J; Letts, J; Padhi, S; Sarkar, S

    2010-01-01

    During normal data taking CMS expects to support potentially as many as 2000 analysis users. Since the beginning of 2008 there have been more than 800 individuals who submitted a remote analysis job to the CMS computing infrastructure. The bulk of these users will be supported at the over 40 CMS Tier-2 centres. Supporting a globally distributed community of users on a globally distributed set of computing clusters is a task that requires reconsidering the normal methods of user support for Analysis Operations. In 2008 CMS formed an Analysis Support Task Force in preparation for large-scale physics analysis activities. The charge of the task force was to evaluate the available support tools, the user support techniques, and the direct feedback of users with the goal of improving the success rate and user experience when utilizing the distributed computing environment. The task force determined the tools needed to assess and reduce the number of non-zero exit code applications submitted through the grid interfaces and worked with the CMS experiment dashboard developers to obtain the necessary information to quickly and proactively identify issues with user jobs and data sets hosted at various sites. Results of the analysis group surveys were compiled. Reference platforms for testing and debugging problems were established in various geographic regions. The task force also assessed the resources needed to make the transition to a permanent Analysis Operations task. In this presentation the results of the task force will be discussed as well as the CMS Analysis Operations plans for the start of data taking.

  16. Use of safety analysis results to support process operation

    International Nuclear Information System (INIS)

    Karvonen, I.; Heino, P.

    1990-01-01

    Safety and risk analysis carried out during the design phase of a process plant produces useful knowledge about the behavior and the disturbances of the system. This knowledge, however, often remains to the designer though it would be of benefit to the operators and supervisors of the process plant, too. In Technical Research Centre of Finland a project has been started to plan and construct a prototype of an information system to make use of the analysis knowledge during the operation phase. The project belongs to a Nordic KRM project (Knowledge Based Risk Management System). The information system is planned to base on safety and risk analysis carried out during the design phase and completed with operational experience. The safety analysis includes knowledge about potential disturbances, their causes and consequences in the form of Hazard and Operability Study, faut trees and/or event trees. During the operation disturbances can however, occur, which are not included in the safety analysis, or the causes or consequences of which have been incompletely identified. Thus the information system must also have an interface for the documentation of the operational knowledge missing from the analysis results. The main tasks off the system when supporting the management of a disturbance are to identify it (or the most important of the coexistent ones) from the stored knowledge and to present it in a proper form (for example as a deviation graph). The information system may also be used to transfer knowledge from one shift to another and to train process personnel

  17. Reliability analysis and operator modelling

    International Nuclear Information System (INIS)

    Hollnagel, Erik

    1996-01-01

    The paper considers the state of operator modelling in reliability analysis. Operator models are needed in reliability analysis because operators are needed in process control systems. HRA methods must therefore be able to account both for human performance variability and for the dynamics of the interaction. A selected set of first generation HRA approaches is briefly described in terms of the operator model they use, their classification principle, and the actual method they propose. In addition, two examples of second generation methods are also considered. It is concluded that first generation HRA methods generally have very simplistic operator models, either referring to the time-reliability relationship or to elementary information processing concepts. It is argued that second generation HRA methods must recognise that cognition is embedded in a context, and be able to account for that in the way human reliability is analysed and assessed

  18. Operational experience feedback with precursor analysis

    International Nuclear Information System (INIS)

    Koncar, M.; Ferjancic, M.; Muehleisen, A.; Vojnovic, D.

    2003-01-01

    Experience of practical operation is a valuable source of information for improving the safety and reliability of nuclear power plants. Operational experience feedback (Olef) system manages this aspect of NPP operation. The traditional ways of investigating operational events, such as the root cause analysis (RCA), are predominantly qualitative. RCA as a part of the Olef system provides technical guidance and management expectations in the conduct of assessing the root cause to prevent recurrence, covering the following areas: conditions preceding the event, sequence of events, equipment performance and system response, human performance considerations, equipment failures, precursors to the event, plant response and follow-up, radiological considerations, regulatory process considerations and safety significance. The root cause of event is recognized when there is no known answer on question 'why has it happened?' regarding relevant condition that may have affected the event. At that point the Olef is proceeding by actions taken in response to events, utilization, dissemination and exchange of operating experience information and at the end reviewing the effectiveness of the Olef. Analysis of the event and the selection of recommended corrective/preventive actions for implementation and prioritization can be enhanced by taking into account the information and insights derived from Pasa-based analysis. A Pasa based method, called probabilistic precursor event analysis (PPE A) provides a complement to the RCA approach by focusing on how an event might have developed adversely, and implies the mapping of an operational event on a probabilistic risk model of the plant in order to obtain a quantitative assessment of the safety significance of the event PSA based event analysis provides, due to its quantitative nature, appropriate prioritization of corrective actions. PPEA defines requirements for PSA model and code, identifies input requirements and elaborates following

  19. Information operation/information warfare modeling and simulation

    OpenAIRE

    Buettner, Raymond

    2000-01-01

    Information Operations have always been a part of warfare. However, this aspect of warfare is having ever-greater importance as forces rely more and more on information as an enabler. Modern information systems make possible very rapid creation, distribution, and utilization of information. These same systems have vulnerabilities that can be exploited by enemy forces. Information force-on-force is important and complex. New tools and procedures are needed for this warfare arena. As these t...

  20. Transformation of Operations Management through Information Technology and Information System in Suning

    Institute of Scientific and Technical Information of China (English)

    SHEN Houcai; YAN Xiaojun

    2004-01-01

    Information technology and information system today play major roles in companies who are competitive in the global market. In this paper, we will study how Suning Appliance Chain changes her operations by using information technology and information system. Suning's Strategy,operations structure, especially her logistics system are discussed firstly; how information technology and information system support her operation and logistics to gain competitive capabilities are further discussed. Finally, the operation system transformation through IT/IS in Suning is studied by the use of a stochastic inventory model.

  1. Evaluation of new control rooms by operator performance analysis

    International Nuclear Information System (INIS)

    Mori, M; Tomizawa, T.; Tai, I.; Monta, K.; Yoshimura, S.; Hattori, Y.

    1987-01-01

    An advanced supervisory and control system called PODIA TM (Plant Operation by Displayed Information and Automation) was developed by Toshiba. Since this system utilizes computer driven CRTs as a main device for information transfer to operators, thorough system integration tests were performed at the factory and evaluations were made of operators' assessment from the initial experience of the system. The PODIA system is currently installed at two BWR power plants. Based on the experiences from the development of PODIA, a more advanced man-machine interface, Advanced-PODIA (A-PODIA), is developed. A-PODIA enhances the capabilities of PODIA in automation, diagnosis, operational guidance and information display. A-PODIA has been validated by carrying out systematic experiments with a full-scope simulator developed for the validation. The results of the experiments have been analyzed by the method of operator performance analysis and applied to further improvement of the A-PODIA system. As a feedback from actual operational experience, operator performance data in simulator training is an important source of information to evaluate human factors of a control room. To facilitate analysis of operator performance, a performance evaluation system has been developed by applying AI techniques. The knowledge contained in the performance evaluation system was elicited from operator training experts and represented as rules. The rules were implemented by employing an object-oriented paradigm to facilitate knowledge management. In conclusion, it is stated that the feedback from new control room operation can be obtained at an early stage by validation tests and also continuously by comprehensive evaluation (with the help of automated tools) of operator performance in simulator training. The results of operator performance analysis can be utilized for improvement of system design as well as operator training. (author)

  2. Cost and Information Effectiveness Analysis (CIEA): A Methodology for Evaluating a Training Device Operational Readiness Assessment Capability (DORAC).

    Science.gov (United States)

    1981-02-01

    Report 528 COST AIND I*FO•?JidTH ?i EFFECT•• ES1BS ANALYSIS (CDEA): A METiBLOBU Y FOR EVALUATIN1G A TRAINING DEMCE OPERATMDN1AL MAEA3 ],SE 3SSESS$ iElT ...8217, N. Within a military setting, the uses of training devices in performance evaluation have generally mirrored civilian uses and primarily...Technical Report 528 COST AND INFORMATION EFFECTIVENESS ANALYSIS (CIEA): A METHODOLOGY FOR EVALUATING A TRAINING DEVICE OPERATIONAL READINESS

  3. An efficiency improvement in warehouse operation using simulation analysis

    Science.gov (United States)

    Samattapapong, N.

    2017-11-01

    In general, industry requires an efficient system for warehouse operation. There are many important factors that must be considered when designing an efficient warehouse system. The most important is an effective warehouse operation system that can help transfer raw material, reduce costs and support transportation. By all these factors, researchers are interested in studying about work systems and warehouse distribution. We start by collecting the important data for storage, such as the information on products, information on size and location, information on data collection and information on production, and all this information to build simulation model in Flexsim® simulation software. The result for simulation analysis found that the conveyor belt was a bottleneck in the warehouse operation. Therefore, many scenarios to improve that problem were generated and testing through simulation analysis process. The result showed that an average queuing time was reduced from 89.8% to 48.7% and the ability in transporting the product increased from 10.2% to 50.9%. Thus, it can be stated that this is the best method for increasing efficiency in the warehouse operation.

  4. Developing a knowledge system for information operations

    CSIR Research Space (South Africa)

    Leenen, L

    2011-03-01

    Full Text Available In this paper we describe a research project to develop an optimal information retrieval system in an Information Operations domain. Information Operations is the application and management of information to gain an advantage over an opponent...

  5. 76 FR 58565 - Proposed Information Collection (Operation Enduring Freedom/Operation Iraqi Freedom Seriously...

    Science.gov (United States)

    2011-09-21

    ... (Operation Enduring Freedom/ Operation Iraqi Freedom Seriously Injured/Ill Service Member Veteran Worksheet... solicits comments on information provided to Operation Enduring Freedom/Operation Iraqi Freedom veterans... information technology. Title: Operation Enduring Freedom/Operation Iraqi Freedom Seriously Injured/Ill...

  6. The Linkage of Joint Operational Fires, Information Operations and the Army: Does the Army Have Effective Feedback Mechanisms that Integrate Operational Fires (Physical Destruction) and Information Operations?

    National Research Council Canada - National Science Library

    Mills, Charles

    2004-01-01

    The information revolution seems to hold a lot of promise to the U.S. economy and the U.S. military, but rigid bureaucratic hierarchies make it extremely difficult for effective integration of operational fires and information operations...

  7. Health-care district management information system plan: Review of operations analysis activities during calendar year 1975 and plan for continued research and analysis activities

    Science.gov (United States)

    Nielson, G. J.; Stevenson, W. G.

    1976-01-01

    Operations research activities developed to identify the information required to manage both the efficiency and effectiveness of the Veterans Administration (VA) health services as these services relate to individual patient care are reported. The clinical concerns and management functions that determine this information requirement are discussed conceptually. Investigations of existing VA data for useful management information are recorded, and a diagnostic index is provided. The age-specific characteristics of diseases and lengths of stay are explored, and recommendations for future analysis activities are articulated. The effect of the introduction of new technology to health care is also discussed.

  8. Operator interface design considerations for a PACS information management system

    Science.gov (United States)

    Steinke, James E.; Nabijee, Kamal H.; Freeman, Rick H.; Prior, Fred W.

    1990-08-01

    As prototype PACS grow into fully digital departmental and hospital-wide systems, effective information storage and retrieval mechanisms become increasingly important. Thus far, designers of PACS workstations have concentrated on image communication and display functionality. The new challenge is to provide appropriate operator interface environments to facilitate information retrieval. The "Marburg Model" 1 provides a detailed analysis of the functions, control flows and data structures used in Radiology. It identifies a set of "actors" who perform information manipulation functions. Drawing on this model and its associated methodology it is possible to identify four modes of use of information systems in Radiology: Clinical Routine, Research, Consultation, and Administration. Each mode has its own specific access requirements and views of information. An operator interface strategy appropriate for each mode will be proposed. Clinical Routine mode is the principal concern of PACS primary diagnosis workstations. In a full PACS implementation, such workstations must provide a simple and consistent navigational aid for the on-line image database, a local work list of cases to be reviewed, and easy access to information from other hospital information systems. A hierarchical method of information access is preferred because it provides the ability to start at high-level entities and iteratively narrow the scope of information from which to select subsequent operations. An implementation using hierarchical, nested software windows which fulfills such requirements shall be examined.

  9. 77 FR 7243 - Proposed Information Collection (Operation Enduring Freedom/Operation Iraqi Freedom Veterans...

    Science.gov (United States)

    2012-02-10

    ... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0728] Proposed Information Collection (Operation Enduring Freedom/ Operation Iraqi Freedom Veterans Health Needs Assessment) Activities Under OMB....'' SUPPLEMENTARY INFORMATION: Title: Operation Enduring Freedom/Operation Iraqi Freedom Veterans Health Needs...

  10. METHODOLOGICAL APPROACH TO ANALYSIS AND EVALUATION OF INFORMATION PROTECTION IN INFORMATION SYSTEMS BASED ON VULNERABILITY DANGER

    Directory of Open Access Journals (Sweden)

    Y. M. Krotiuk

    2008-01-01

    Full Text Available The paper considers a methodological approach to an analysis and estimation of information security in the information systems which is based on the analysis of vulnerabilities and an extent of their hazard. By vulnerability hazard it is meant a complexity of its operation as a part of an information system. The required and sufficient vulnerability operational conditions  have  been  determined in the paper. The paper proposes a generalized model for attack realization which is used as a basis for construction of an attack realization model for an operation of a particular vulnerability. A criterion for estimation of information protection in the information systems which is based on the estimation of vulnerability hazard is formulated in the paper. The proposed approach allows to obtain a quantitative estimation of the information system security on the basis of the proposed schemes on realization of typical attacks for the distinguished classes of vulnerabilities.The methodical approach is used for choosing variants to be applied for realization of protection mechanisms in the information systems as well as for estimation of information safety in the operating information systems.

  11. Flexible and adaptive water systems operations through more informed and dynamic decisions

    Science.gov (United States)

    Castelletti, A.; Giuliani, M.

    2016-12-01

    Timely adapting the operations of water systems to be resilient against rapid changes in both hydroclimatic and socioeconomic forcing is generally recommended as a part of planning and managing water resources under uncertain futures. A great opportunity to make the operations more flexible and adaptive is offered by the unprecedented amount of information that is becoming available to water system operators, providing a wide range of data at increasingly higher temporal and spatial resolution. Yet, many water systems are still operated using very simple information systems, typically based on basic statistical analysis and the operator's experience. In this work, we discuss the potential offered by incorporating improved information to enhance water systems operation and increase their ability of adapting to different external conditions and resolving potential conflicts across sectors. In particular, we focus on the use of different variables associated to different dynamics of the system (slow and fast) diversely impacting the operating objectives on the short-, medium- and long-term. The multi-purpose operations of the Hoa Binh reservoir in the Red River Basin (Vietnam) is used to demonstrate our approach. Numerical results show that our procedure is able to automatically select the most valuable information for improving the Hoa Binh operations and mitigating the conflict between short-term objectives, i.e. hydropower production and flood control. Moreover, we also successfully identify low-frequency climate information associated to El-Nino Southern Oscillation for improving the performance in terms of long-term objectives, i.e. water supply. Finally, we assess the value of better informing operational decisions for adapting the system operations to changing conditions by considering different climate change projections.

  12. Information delivery in team communication of MCR operators for an emergency task

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kwang Sub; Park, Jin Kyun; Jung, Won Dae

    2005-01-01

    Team performance is a major measure to evaluate the ability of team when a lot of people perform a task of common purpose such as the main control room operators in the nuclear power plant. A team performance is affected the collaboration and communication among operators under dynamic situation as well as by the cognitive process of each team member. Specially, under the emergency situation, more clear and apparent communication in a team is a critical key for the appropriate response to emergency situation. As a general human factor analysis accesses the operator's behavior, it leads to a resulting action of planning, decision, problem-solving. In order to access the internal information and background information of his/her behavior, the verbal protocol analysis is applied. The impact factors on the team performance are derived from the state of the art for team performance, and it is found that the communication is a common key for all impact factors. And, in turn, the impact factors for the communication are accesses and the more detailed analysis is performed. The recorded data for the operator training for emergency situation of nuclear power plant training center are analyzed according to the verbal protocol analysis that are being generally utilized in cognitive psychology, educational psychology, and cognitive science. Two aspects, external (syntax) and internal (symantic) aspects of communication are reviewed. From the syntax analysis, it is found that the task of each step in EOP is separated according to each corresponding operator and the ordinary training is important, and the weak-points for a sentence presentation can be found team-by-team. And, from the symantic analysis for the diagnostic procedure of EOP is performed and the communication errors due to different situation awareness by operators could be found, and it lead to a diagnosis failure. The factors for different symantic cognition for a situation are analyzed and the affecting

  13. 77 FR 41371 - Proposed Information Collection; Comment Request; Foreign Airline Operators' Revenues and...

    Science.gov (United States)

    2012-07-13

    ... policy questions related to foreign airline operators' revenues and expenses in the United States. There... DEPARTMENT OF COMMERCE Bureau of Economic Analysis Proposed Information Collection; Comment Request; Foreign Airline Operators' Revenues and Expenses in the United States ACTION: Notice. SUMMARY...

  14. Information Operations: Where Next?

    National Research Council Canada - National Science Library

    Buchholz, David R

    2005-01-01

    ... to standardized IO training and integration across the combatant commands. For this reason and others there is a compelling argument for the major responsibility for DoD information operations integration to fall under the control of U.S...

  15. Information theoretic analysis of canny edge detection in visual communication

    Science.gov (United States)

    Jiang, Bo; Rahman, Zia-ur

    2011-06-01

    In general edge detection evaluation, the edge detectors are examined, analyzed, and compared either visually or with a metric for specific an application. This analysis is usually independent of the characteristics of the image-gathering, transmission and display processes that do impact the quality of the acquired image and thus, the resulting edge image. We propose a new information theoretic analysis of edge detection that unites the different components of the visual communication channel and assesses edge detection algorithms in an integrated manner based on Shannon's information theory. The edge detection algorithm here is considered to achieve high performance only if the information rate from the scene to the edge approaches the maximum possible. Thus, by setting initial conditions of the visual communication system as constant, different edge detection algorithms could be evaluated. This analysis is normally limited to linear shift-invariant filters so in order to examine the Canny edge operator in our proposed system, we need to estimate its "power spectral density" (PSD). Since the Canny operator is non-linear and shift variant, we perform the estimation for a set of different system environment conditions using simulations. In our paper we will first introduce the PSD of the Canny operator for a range of system parameters. Then, using the estimated PSD, we will assess the Canny operator using information theoretic analysis. The information-theoretic metric is also used to compare the performance of the Canny operator with other edge-detection operators. This also provides a simple tool for selecting appropriate edgedetection algorithms based on system parameters, and for adjusting their parameters to maximize information throughput.

  16. Operational Modal Analysis of the Cablestayed Footbridge

    Science.gov (United States)

    Kortiš, Ján; Daniel, Ľuboš; Farbák, Matúš; Maliar, Lukáš; Škarupa, Milan

    2017-12-01

    Modern architecture leads to design subtle bridge structures that are more sensitive to increased dynamic loading than the massive ones. This phenomenon can be especially observed on lightweight steel structures such as suspended footbridges. As a result, it is necessary to know precisely its dynamic characteristics, such as natural frequencies, natural shapes and damping of construction. This information can be used for further analysis such as damage detection, system identification, health monitoring, etc. or also for the design of new types of construction. For this purpose, classical modal analysis using trigger load or harmonic vibration exciter in combination with acceleration sensors is used in practice. However, there are many situations where it is not possible to stop the traffic or operation of the bridge. The article presents an experimental measurement of the dynamic parameters of the structure at the operating load using the operational modal analysis.

  17. Operational Modal Analysis of the Cablestayed Footbridge

    Directory of Open Access Journals (Sweden)

    Kortiš Ján

    2017-12-01

    Full Text Available Modern architecture leads to design subtle bridge structures that are more sensitive to increased dynamic loading than the massive ones. This phenomenon can be especially observed on lightweight steel structures such as suspended footbridges. As a result, it is necessary to know precisely its dynamic characteristics, such as natural frequencies, natural shapes and damping of construction. This information can be used for further analysis such as damage detection, system identification, health monitoring, etc. or also for the design of new types of construction. For this purpose, classical modal analysis using trigger load or harmonic vibration exciter in combination with acceleration sensors is used in practice. However, there are many situations where it is not possible to stop the traffic or operation of the bridge. The article presents an experimental measurement of the dynamic parameters of the structure at the operating load using the operational modal analysis.

  18. Enhancing Safeguards through Information Analysis: Business Analytics Tools

    International Nuclear Information System (INIS)

    Vincent, J.; Midwinter, J.

    2015-01-01

    For the past 25 years the IBM i2 Intelligence Analysis product portfolio has assisted over 4,500 organizations across law enforcement, defense, government agencies, and commercial private sector businesses to maximize the value of the mass of information to discover and disseminate actionable intelligence that can help identify, investigate, predict, prevent, and disrupt criminal, terrorist, and fraudulent acts; safeguarding communities, organizations, infrastructures, and investments. The collaborative Intelligence Analysis environment delivered by i2 is specifically designed to be: · scalable: supporting business needs as well as operational and end user environments · modular: an architecture which can deliver maximum operational flexibility with ability to add complimentary analytics · interoperable: integrating with existing environments and eases information sharing across partner agencies · extendable: providing an open source developer essential toolkit, examples, and documentation for custom requirements i2 Intelligence Analysis brings clarity to complex investigations and operations by delivering industry leading multidimensional analytics that can be run on-demand across disparate data sets or across a single centralized analysis environment. The sole aim is to detect connections, patterns, and relationships hidden within high-volume, all-source data, and to create and disseminate intelligence products in near real time for faster informed decision making. (author)

  19. Laboratory Information Systems Management and Operations.

    Science.gov (United States)

    Cucoranu, Ioan C

    2015-06-01

    The main mission of a laboratory information system (LIS) is to manage workflow and deliver accurate results for clinical management. Successful selection and implementation of an anatomic pathology LIS is not complete unless it is complemented by specialized information technology support and maintenance. LIS is required to remain continuously operational with minimal or no downtime and the LIS team has to ensure that all operations are compliant with the mandated rules and regulations. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Measurement of the Operating Parameters and Numerical Analysis of the Mechanical Subsystem

    Directory of Open Access Journals (Sweden)

    Božek Pavol

    2014-08-01

    Full Text Available Submission is focused on completing the information system about quality, operation, automatic testing and new evaluating method of vehicle subsystem. Numeric analysis is carried out on the base of automatic collection and systematic recording of commercial car operation. Proposed new information system about operation and trial process allows verification according to the proposed method. Critical components verified in laboratory conditions are detected by numeric analysis of reliability. Quality level increasing not only for final product, but also related automatic test laboratory for cars is the result of respecting these principles.

  1. Measurement of the Operating Parameters and Numerical Analysis of the Mechanical Subsystem

    Science.gov (United States)

    Božek, Pavol; Turygin, Yuri

    2014-08-01

    Submission is focused on completing the information system about quality, operation, automatic testing and new evaluating method of vehicle subsystem. Numeric analysis is carried out on the base of automatic collection and systematic recording of commercial car operation. Proposed new information system about operation and trial process allows verification according to the proposed method. Critical components verified in laboratory conditions are detected by numeric analysis of reliability. Quality level increasing not only for final product, but also related automatic test laboratory for cars is the result of respecting these principles.

  2. Antiviral Information Management System (AIMS): a prototype for operational innovation in drug development.

    Science.gov (United States)

    Jadhav, Pravin R; Neal, Lauren; Florian, Jeff; Chen, Ying; Naeger, Lisa; Robertson, Sarah; Soon, Guoxing; Birnkrant, Debra

    2010-09-01

    This article presents a prototype for an operational innovation in knowledge management (KM). These operational innovations are geared toward managing knowledge efficiently and accessing all available information by embracing advances in bioinformatics and allied fields. The specific components of the proposed KM system are (1) a database to archive hepatitis C virus (HCV) treatment data in a structured format and retrieve information in a query-capable manner and (2) an automated analysis tool to inform trial design elements for HCV drug development. The proposed framework is intended to benefit drug development by increasing efficiency of dose selection and improving the consistency of advice from US Food and Drug Administration (FDA). It is also hoped that the framework will encourage collaboration among FDA, industry, and academic scientists to guide the HCV drug development process using model-based quantitative analysis techniques.

  3. 76 FR 73022 - Agency Information Collection (Operation Enduring Freedom/Operation Iraqi Freedom Seriously...

    Science.gov (United States)

    2011-11-28

    ... (Operation Enduring Freedom/ Operation Iraqi Freedom Seriously Injured/Ill Service Member Veteran Worksheet... No. 2900-0720.'' SUPPLEMENTARY INFORMATION: Title: Operation Enduring Freedom/Operation Iraqi Freedom... used VA Form 21-0773 as a checklist to ensure they provided Operation Enduring Freedom or Operation...

  4. Reactor operation environmental information document

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, L.R.; Hayes, D.W.; Hunter, C.H.; Marter, W.L.; Moyer, R.A.

    1989-12-01

    This volume is a reactor operation environmental information document for the Savannah River Plant. Topics include meteorology, surface hydrology, transport, environmental impacts, and radiation effects. 48 figs., 56 tabs. (KD)

  5. Reactor operation safety information document

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    The report contains a reactor facility description which includes K, P, and L reactor sites, structures, operating systems, engineered safety systems, support systems, and process and effluent monitoring systems; an accident analysis section which includes cooling system anomalies, radioactive materials releases, and anticipated transients without scram; a summary of onsite doses from design basis accidents; severe accident analysis (reactor core disruption); a description of operating contractor organization and emergency planning; and a summary of reactor safety evolution. (MB)

  6. Information Operations: Training the Leaders

    National Research Council Canada - National Science Library

    Ferriter, Michael

    1999-01-01

    The purpose of this project is to determine if the Army's officer education and training systems adequately prepare our leaders to operate within, and to deploy, fight, and win in the Information Age...

  7. Improving emergency management through shared information processing - considerations in Emergency Operations Center design

    International Nuclear Information System (INIS)

    DeBusk, R.E.; Walker, J.A.

    1987-01-01

    An Emergency Operations Center (EOC) is a shared information processing facility. Although seemingly obvious, many EOCs are designed and operated based on other criteria. The results, measured in terms of response effectiveness, are difficult to determine. A review of some recent disasters reveals a pattern of poor performance for the EOCs involved. These conclusions are tentative because so little research has been done on the design, operation, or evaluation of emergency operations centers. The EOC is not an onsite response command post but a facility removed from the response where tactical and strategic decisions are made based on information from the response site and elsewhere. The EOC is therefore the central focus of emergency information processing and higher-level decision making. Examining existing EOCs, several common functions emerge. These functions can be described in terms of shared information processing. However, many factors impact the design and operation of EOCs. Politics, budgets, and personal ambition are only a few such factors. Examining EOC design and operation in terms of shared information processing operationalized in the seven principal functions within the EOC provides a framework for establishing principles of EOC design and operation. In the response to emergencies such as Bhopal or Chernobyl the stakes are high. Applying new techniques and technologies of management systems can improve the probability of success. This research is a beginning step - to understand how EOCs function, to define the system. Predictive or prescriptive analysis must wait until sufficient empirical data is available to complete a descriptive model for EOC operations

  8. An information theory-based approach to modeling the information processing of NPP operators

    International Nuclear Information System (INIS)

    Kim, Jong Hyun; Seong, Poong Hyun

    2002-01-01

    This paper proposes a quantitative approach to modeling the information processing of NPP operators. The aim of this work is to derive the amount of the information processed during a certain control task. The focus will be on i) developing a model for information processing of NPP operators and ii) quantifying the model. To resolve the problems of the previous approaches based on the information theory, i.e. the problems of single channel approaches, we primarily develop the information processing model having multiple stages, which contains information flows. Then the uncertainty of the information is quantified using the Conant's model, a kind of information theory

  9. The Challenge of New and Emerging Information Operations

    National Research Council Canada - National Science Library

    Heath, James E; Woodcock, Alexander E

    1999-01-01

    Information operations as defined in Joint Publication 3-13 of the Joint Staff (1998) are aimed at influencing the information and information systems of an adversary and defending one's own information and information systems...

  10. Informational analysis involving application of complex information system

    Science.gov (United States)

    Ciupak, Clébia; Vanti, Adolfo Alberto; Balloni, Antonio José; Espin, Rafael

    The aim of the present research is performing an informal analysis for internal audit involving the application of complex information system based on fuzzy logic. The same has been applied in internal audit involving the integration of the accounting field into the information systems field. The technological advancements can provide improvements to the work performed by the internal audit. Thus we aim to find, in the complex information systems, priorities for the work of internal audit of a high importance Private Institution of Higher Education. The applied method is quali-quantitative, as from the definition of strategic linguistic variables it was possible to transform them into quantitative with the matrix intersection. By means of a case study, where data were collected via interview with the Administrative Pro-Rector, who takes part at the elaboration of the strategic planning of the institution, it was possible to infer analysis concerning points which must be prioritized at the internal audit work. We emphasize that the priorities were identified when processed in a system (of academic use). From the study we can conclude that, starting from these information systems, audit can identify priorities on its work program. Along with plans and strategic objectives of the enterprise, the internal auditor can define operational procedures to work in favor of the attainment of the objectives of the organization.

  11. Construction Operations Building Information Exchange (COBIE)

    Science.gov (United States)

    2007-06-01

    Swalley U.S. Department of State, Overseas Buildings Operations Toby Wilson U.S. Army, Corps of Engineers, Engineer R&D Center Jeff Wix AEC3 The...exchanged in COBIE. To map those information exchanges to the IFC model, the Information Delivery Manual (IDM) process [ Wix 2007] was also used. The...Folksonomy. Wikimedia Foundation. http://en.wikipedia.org/wiki/Folksonomy/, accessed 3 August 2007. Wix , Jeffrey. 2007. Information Delivery Manual

  12. 23 CFR 752.8 - Privately operated information centers and systems.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Privately operated information centers and systems. 752... may permit privately operated information centers and systems which conform with the standards of this... AND ENVIRONMENT LANDSCAPE AND ROADSIDE DEVELOPMENT § 752.8 Privately operated information centers and...

  13. Human error analysis project (HEAP) - The fourth pilot study: verbal data for analysis of operator performance

    International Nuclear Information System (INIS)

    Braarud, Per Oeyvind; Droeyvoldsmo, Asgeir; Hollnagel, Erik

    1997-06-01

    This report is the second report from the Pilot study No. 4 within the Human Error Analyses Project (HEAP). The overall objective of HEAP is to provide a better understanding and explicit modelling of how and why ''cognitive errors'' occur. This study investigated the contribution from different verbal data sources for analysis of control room operator's performance. Operator's concurrent verbal report, retrospective verbal report, and process expert's comments were compared for their contribution to an operator performance measure. This study looked into verbal protocols for single operator and for team. The main findings of the study were that all the three verbal data sources could be used to study performance. There was a relative high overlap between the data sources, but also a unique contribution from each source. There was a common pattern in the types of operator activities the data sources gave information about. The operator's concurrent protocol overall contained slightly more information on the operator's activities than the other two verbal sources. The study also showed that concurrent verbal protocol is feasible and useful for analysis of team's activities during a scenario. (author)

  14. Mission Command in the Age of Network-Enabled Operations: Social Network Analysis of Information Sharing and Situation Awareness.

    Science.gov (United States)

    Buchler, Norbou; Fitzhugh, Sean M; Marusich, Laura R; Ungvarsky, Diane M; Lebiere, Christian; Gonzalez, Cleotilde

    2016-01-01

    A common assumption in organizations is that information sharing improves situation awareness and ultimately organizational effectiveness. The sheer volume and rapid pace of information and communications received and readily accessible through computer networks, however, can overwhelm individuals, resulting in data overload from a combination of diverse data sources, multiple data formats, and large data volumes. The current conceptual framework of network enabled operations (NEO) posits that robust networking and information sharing act as a positive feedback loop resulting in greater situation awareness and mission effectiveness in military operations (Alberts and Garstka, 2004). We test this assumption in a large-scale, 2-week military training exercise. We conducted a social network analysis of email communications among the multi-echelon Mission Command staff (one Division and two sub-ordinate Brigades) and assessed the situational awareness of every individual. Results from our exponential random graph models challenge the aforementioned assumption, as increased email output was associated with lower individual situation awareness. It emerged that higher situation awareness was associated with a lower probability of out-ties, so that broadly sending many messages decreased the likelihood of attaining situation awareness. This challenges the hypothesis that increased information sharing improves situation awareness, at least for those doing the bulk of the sharing. In addition, we observed two trends that reflect a compartmentalizing of networked information sharing as email links were more commonly formed among members of the command staff with both similar functions and levels of situation awareness, than between two individuals with dissimilar functions and levels of situation awareness; both those findings can be interpreted to reflect effects of homophily. Our results have major implications that challenge the current conceptual framework of NEO. In

  15. A quantitative approach to modeling the information processing of NPP operators under input information overload

    International Nuclear Information System (INIS)

    Kim, Jong Hyun; Seong, Poong Hyun

    2002-01-01

    This paper proposes a quantitative approach to modeling the information processing of NPP operators. The aim of this work is to derive the amount of the information processed during a certain control task under input information overload. We primarily develop the information processing model having multiple stages, which contains information flow. Then the uncertainty of the information is quantified using the Conant's model, a kind of information theory. We also investigate the applicability of this approach to quantifying the information reduction of operators under the input information overload

  16. Modeling decisions information fusion and aggregation operators

    CERN Document Server

    Torra, Vicenc

    2007-01-01

    Information fusion techniques and aggregation operators produce the most comprehensive, specific datum about an entity using data supplied from different sources, thus enabling us to reduce noise, increase accuracy, summarize and extract information, and make decisions. These techniques are applied in fields such as economics, biology and education, while in computer science they are particularly used in fields such as knowledge-based systems, robotics, and data mining. This book covers the underlying science and application issues related to aggregation operators, focusing on tools used in practical applications that involve numerical information. Starting with detailed introductions to information fusion and integration, measurement and probability theory, fuzzy sets, and functional equations, the authors then cover the following topics in detail: synthesis of judgements, fuzzy measures, weighted means and fuzzy integrals, indices and evaluation methods, model selection, and parameter extraction. The method...

  17. Intelligent Data Analysis in the EMERCOM Information System

    Science.gov (United States)

    Elena, Sharafutdinova; Tatiana, Avdeenko; Bakaev, Maxim

    2017-01-01

    The paper describes an information system development project for the Russian Ministry of Emergency Situations (MES, whose international operations body is known as EMERCOM), which was attended by the representatives of both the IT industry and the academia. Besides the general description of the system, we put forward OLAP and Data Mining-based approaches towards the intelligent analysis of the data accumulated in the database. In particular, some operational OLAP reports and an example of multi-dimensional information space based on OLAP Data Warehouse are presented. Finally, we outline Data Mining application to support decision-making regarding security inspections planning and results consideration.

  18. Information Flow Analysis for Human-System Interaction in the SG Level Control

    International Nuclear Information System (INIS)

    Kim, Jong Hyun; Shin, Yeong Cheol

    2008-01-01

    Interaction between automatic control and operators is one of main issues in the application of automation technology. Inappropriate information from automatic control systems causes unexpected problems in human-automation collaboration. Poor information becomes critical, especially when the operator takes over the control from an automation system. Operators cannot properly handle the situation transferred from the automatic mode because of inadequate situation awareness, if the operator is out-of-the loop and the automatic control system fails. Some cases of unplanned reactor trips during the transition between the manual mode and the automatic mode are reported in nuclear power plants (NPPs). Among unplanned reactor trips since 2002, two cases were partially caused by automation-related failures of steam generator (SG) level control. This paper conducts information flow analysis to identify information and control requirement for human-system interaction of SG level control. At first, this paper identifies the level of automation in SG level control systems and then function allocation between system control and human operators. Then information flow analysis for monitoring and transition of automation is performed by adapting job process chart. Information and control requirements will be useful as an input for the human-system interface (HSI) design of SG level control

  19. Organizing for Information Operations Within The Joint Task Force

    National Research Council Canada - National Science Library

    McLaughlin, Lawrence

    2003-01-01

    .... Joint doctrine defines information operations as a broad range of capabilities and related activities that include operations security, psychological operations, electronic warfare, physical attack...

  20. Intelligence system for reactor operator informational support

    International Nuclear Information System (INIS)

    Prangishvili, I.V.; Pashchenko, F.F.; Saprykin, E.M.

    1989-01-01

    Problems related to creation and introduction at NPP of highly efficient and reliable systems for monitoring and control of working processes and intelligence-endowed systems of operator informational support (ISOIS) are considered. The main units included in ISOIS are considered. The main units included in ISOIS are described. The unit of current state monitoring provides information for the operator, which is necessary under concrete conditions for the process monitoring and control, so as to avoid emergencies and affers a program of actions in a dialogue mode for the operator. The identification unit is designed for the obtaining of assessed values of process parameters (neutron fields, temperatures, pressures) and basic equipment (reactivity coefficients, fuel rod weights, time of delay). The prediction unit evaluates the behaviour of process parameters and process state in various situations. 9 refs

  1. Analysis of operating reliability of WWER-1000 unit

    International Nuclear Information System (INIS)

    Bortlik, J.

    1985-01-01

    The nuclear power unit was divided into 33 technological units. Input data for reliability analysis were surveys of operating results obtained from the IAEA information system and certain indexes of the reliability of technological equipment determined using the Bayes formula. The missing reliability data for technological equipment were used from the basic variant. The fault tree of the WWER-1000 unit was determined for the peak event defined as the impossibility of reaching 100%, 75% and 50% of rated power. The period was observed of the nuclear power plant operation with reduced output owing to defect and the respective time needed for a repair of the equipment. The calculation of the availability of the WWER-1000 unit was made for different variant situations. Certain indexes of the operating reliability of the WWER-1000 unit which are the result of a detailed reliability analysis are tabulated for selected variants. (E.S.)

  2. Information Analysis Centers in the Department of Defense. Revision

    Science.gov (United States)

    1987-07-01

    Combat Data Information Center (CDIC) and the Aircraft Survivability Model Repository ( ASMR ) into the Survivability/Vulnerability Information Analysis...Information Center (CDIC) and the Aircraft Survivability Model Respository ( ASMR ). The CDIC was a central repository for combat and test data related to...and ASMR were operated under the technical monitorship of the Flight Dynamics Laboratory at Wright-Patterson AFB, Ohio and were located in Flight

  3. Improving plant state information for better operational safety

    International Nuclear Information System (INIS)

    Girard, C.; Olivier, E.; Grimaldi, X.

    1994-01-01

    Nuclear Power Plant (NPP) safety is strongly dependent on components' reliability and particularly on plant state information reliability. This information, used by the plant operators in order to produce appropriate actions, have to be of a high degree of confidence, especially in accidental conditions where safety is threatened. In this perspective, FRAMATOME, EDF and CEA have started a joint research program to prospect different solutions aiming at a better reliability for critical information needed to safety operate the plant. This paper gives the main results of this program and describes the developments that have been made in order to assess reliability of different information systems used in a Nuclear Power Plant. (Author)

  4. 75 FR 47631 - Swets Information Services, Operations Department, Information Technology Group, Marketing Group...

    Science.gov (United States)

    2010-08-06

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,668] Swets Information Services, Operations Department, Information Technology Group, Marketing Group, Finance Group, Runnemede..., Information Technology (IT) Group, Marketing Group and the Finance Group into one entity instead of...

  5. Analysis of the results of the energy market operation

    International Nuclear Information System (INIS)

    Popovska, V.; Diankov, M.

    2006-01-01

    The paper focuses on the results of the market operation. It includes: analysis of the active market participants and steps to be undertaken in respect of access to the grid and registration on the market, as well as a comparative analysis of the trade at regulated and freely negotiated prices. This report analyses the imbalances of the consumers of energy, generators, including generators operating with one unit. Information about the special role of the public supplier as a main provider of balancing energy, market interruption in case of emergency situation and force major events, circumstances for the parties and contractual relationship is also included. (authors)

  6. Mands for information using "who?" and "which?" in the presence of establishing and abolishing operations.

    Science.gov (United States)

    Shillingsburg, M Alice; Bowen, Crystal N; Valentino, Amber L; Pierce, Laura E

    2014-01-01

    Treatments designed to teach mands for information have included prompting and differential reinforcement, as well as procedures to manipulate the relevant establishing operation (EO). However, previous studies have not included relevant abolishing operation (AO) conditions to ensure that the mand is under relevant antecedent control. Data on listener responses (i.e., use of the information) are also absent in the literature. The current study shows differential responding under EO and AO conditions and reports listener responses that demonstrate use of the provided information. Three participants, diagnosed with an autism spectrum disorder, learned to mand for information using "who?" and "which?" questions exclusively under EO conditions. In addition, each participant responded to the information provided to access a preferred item. Generalization of the "which?" mand for information was also demonstrated across novel stimuli. © Society for the Experimental Analysis of Behavior.

  7. Education of information users and promotional operations of the branch information centre

    International Nuclear Information System (INIS)

    Kohoutova, J.

    1982-01-01

    The Nuclear Information Centre also operates in the field of education and publicity. It organizes seminars, symposia and exhibitions in Czechoslovakia and abroad and has processed handbooks for INIS output users. Working excursions are also organized to the Nuclear Information Centre. (M.D.)

  8. Information Operations Versus Civilian Marketing and Advertising: A Comparative Analysis to Improve IO Planning and Strategy

    National Research Council Canada - National Science Library

    Chilton, Dan

    2008-01-01

    .... must re-focus its efforts on Information Operations to achieve GWOT objectives. In an environment where rapidly advancing technology is drastically improving the individual's ability to conduct IO against the U.S...

  9. Requirements to be made on future information systems in NPP operation

    International Nuclear Information System (INIS)

    Becker, G.; Distler, K.

    1987-01-01

    The objective of advanced operational information systems (OIS) is to support and alleviate the operator's work. Human skills and performance limits on the one hand, and the tasks of the operators during various operating states on the other hand are the bases for deriving system design requirements. The paper discusses such aspects like the dynamism of process events, the passive/active role played by the operators in normal/disturbed operation, the compatibility of information representation between OIS and conventional display configuration, parallel versus serial information presentation, team work of operators, parallel processing of tasks within the team; the resulting requirements are derived. (orig./DG) [de

  10. A Comparative Analysis of University Information Systems within the Scope of the Information Security Risks

    Directory of Open Access Journals (Sweden)

    Rustu Yilmaz

    2016-05-01

    Full Text Available Universities are the leading institutions that are the sources of educated human population who both produce information and ensure to develop new products and new services by using information effectively, and who are needed in every area. Therefore, universities are expected to be institutions where information and information management are used efficiently. In the present study, the topics such as infrastructure, operation, application, information, policy and human-based information security at universities were examined within the scope of the information security standards which are highly required and intended to be available at each university today, and then a comparative analysis was conducted specific to Turkey. Within the present study, the Microsoft Security Assessment Tool developed by Microsoft was used as the risk analysis tool. The analyses aim to enable the universities to compare their information systems with the information systems of other universities within the scope of the information security awareness, and to make suggestions in this regard.

  11. Automatic circuit analysis based on mask information

    International Nuclear Information System (INIS)

    Preas, B.T.; Lindsay, B.W.; Gwyn, C.W.

    1976-01-01

    The Circuit Mask Translator (CMAT) code has been developed which converts integrated circuit mask information into a circuit schematic. Logical operations, pattern recognition, and special functions are used to identify and interconnect diodes, transistors, capacitors, and resistances. The circuit topology provided by the translator is compatible with the input required for a circuit analysis program

  12. Operator Informational Needs for Multiple Autonomous Small Vehicles

    Science.gov (United States)

    Trujillo, Anna C.; Fan, Henry; Cross, Charles D.; Hempley, Lucas E.; Cichella, Venanzio; Puig-Navarro, Javier; Mehdi, Syed Bilal

    2015-01-01

    With the anticipated explosion of small unmanned aerial vehicles, it is highly likely that operators will be controlling fleets of autonomous vehicles. To fulfill the promise of autonomy, vehicle operators will not be concerned with manual control of the vehicle; instead, they will deal with the overall mission. Furthermore, the one operator to many vehicles is becoming a constant meme with various industries including package delivery, search and rescue, and utility companies. In order for an operator to concurrently control several vehicles, his station must look and behave very differently than the current ground control station instantiations. Furthermore, the vehicle will have to be much more autonomous, especially during non-normal operations, in order to accommodate the knowledge deficit or the information overload of the operator in charge of several vehicles. The expected usage increase of small drones requires presenting the operational information generated by a fleet of heterogeneous autonomous agents to an operator. NASA Langley Research Center's Autonomy Incubator has brought together researchers in various disciplines including controls, trajectory planning, systems engineering, and human factors to develop an integrated system to study autonomy issues. The initial human factors effort is focusing on mission displays that would give an operator the overall status of all autonomous agents involved in the current mission. This paper will discuss the specifics of the mission displays for operators controlling several vehicles.

  13. Informational-computer system for the neutron spectra analysis

    International Nuclear Information System (INIS)

    Berzonis, M.A.; Bondars, H.Ya.; Lapenas, A.A.

    1979-01-01

    In this article basic principles of the build-up of the informational-computer system for the neutron spectra analysis on a basis of measured reaction rates are given. The basic data files of the system, needed software and hardware for the system operation are described

  14. Distributed Resource Energy Analysis and Management System (DREAMS) Development for Real-time Grid Operations

    Energy Technology Data Exchange (ETDEWEB)

    Nakafuji, Dora [Hawaiian Electric Company, Honululu, HI (United States); Gouveia, Lauren [Hawaiian Electric Company, Honululu, HI (United States)

    2016-10-24

    This project supports development of the next generation, integrated energy management infrastructure (EMS) able to incorporate advance visualization of behind-the-meter distributed resource information and probabilistic renewable energy generation forecasts to inform real-time operational decisions. The project involves end-users and active feedback from an Utility Advisory Team (UAT) to help inform how information can be used to enhance operational functions (e.g. unit commitment, load forecasting, Automatic Generation Control (AGC) reserve monitoring, ramp alerts) within two major EMS platforms. Objectives include: Engaging utility operations personnel to develop user input on displays, set expectations, test and review; Developing ease of use and timeliness metrics for measuring enhancements; Developing prototype integrated capabilities within two operational EMS environments; Demonstrating an integrated decision analysis platform with real-time wind and solar forecasting information and timely distributed resource information; Seamlessly integrating new 4-dimensional information into operations without increasing workload and complexities; Developing sufficient analytics to inform and confidently transform and adopt new operating practices and procedures; Disseminating project lessons learned through industry sponsored workshops and conferences;Building on collaborative utility-vendor partnership and industry capabilities

  15. Development of Information Display System for Operator Support in Severe Accident

    International Nuclear Information System (INIS)

    Jeong, Kwang Il; Lee, Joon Ku

    2016-01-01

    When the severe accident occurs, the technical support center (TSC) performs the mitigation strategy with severe accident management guidelines (SAMG) and communicates with main control room (MCR) operators to obtain information of plant's status. In such circumstances, the importance of an information display for severe accident is increased. Therefore an information display system dedicated to severe accident conditions is required to secure the plant information, to provide the necessary information to MCR operators and TSC operators, and to support the decision using these information. We setup the design concept of severe accident information display system (SIDS) in the previous study and defined its requirements of function and performance. This paper describes the process, results of the identification of the severe accident information for MCR operator and the implementation of SIDS. Further implementation on post-accident monitoring function and data validation function for severe accidents will be accomplished in the future

  16. Science-based HRA: experimental comparison of operator performance to IDAC (Information-Decision-Action Crew) simulations

    Energy Technology Data Exchange (ETDEWEB)

    Shirley, Rachel [The Ohio State Univ., Columbus, OH (United States); Smidts, Carol [The Ohio State Univ., Columbus, OH (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Li, Yuandan [Univ. of Maryland, College Park, MD (United States); Mosleh, Ali [Univ. of Maryland, College Park, MD (United States)

    2015-02-01

    Information-Decision-Action Crew (IDAC) operator model simulations of a Steam Generator Tube Rupture are compared to student operator performance in studies conducted in the Ohio State University’s Nuclear Power Plant Simulator Facility. This study is presented as a prototype for conducting simulator studies to validate key aspects of Human Reliability Analysis (HRA) methods. Seven student operator crews are compared to simulation results for crews designed to demonstrate three different decision-making strategies. The IDAC model used in the simulations is modified slightly to capture novice behavior rather that expert operators. Operator actions and scenario pacing are compared. A preliminary review of available performance shaping factors (PSFs) is presented. After the scenario in the NPP Simulator Facility, student operators review a video of the scenario and evaluate six PSFs at pre-determined points in the scenario. This provides a dynamic record of the PSFs experienced by the OSU student operators. In this preliminary analysis, Time Constraint Load (TCL) calculated in the IDAC simulations is compared to TCL reported by student operators. We identify potential modifications to the IDAC model to develop an “IDAC Student Operator Model.” This analysis provides insights into how similar experiments could be conducted using expert operators to improve the fidelity of IDAC simulations.

  17. Reliability analysis of maintenance operations for railway tracks

    International Nuclear Information System (INIS)

    Rhayma, N.; Bressolette, Ph.; Breul, P.; Fogli, M.; Saussine, G.

    2013-01-01

    Railway engineering is confronted with problems due to degradation of the railway network that requires important and costly maintenance work. However, because of the lack of knowledge on the geometrical and mechanical parameters of the track, it is difficult to optimize the maintenance management. In this context, this paper presents a new methodology to analyze the behavior of railway tracks. It combines new diagnostic devices which permit to obtain an important amount of data and thus to make statistics on the geometric and mechanical parameters and a non-intrusive stochastic approach which can be coupled with any mechanical model. Numerical results show the possibilities of this methodology for reliability analysis of different maintenance operations. In the future this approach will give important informations to railway managers to optimize maintenance operations using a reliability analysis

  18. A method for analysis of nuclear power plant operators' decision making in simulated disturbance situations

    International Nuclear Information System (INIS)

    1995-01-01

    An analysis method has been developed for analysis of nuclear power plant operators' decision making in simulated disturbance situations. The aim of the analysis is to investigate operators' orientation which is expected to manifest itself as collective strategies in utilization of resources of decision making. Resources analyzed here are different information sources and, in addition, collaborative resources like communication and participation. The cognitive approach on the basis of the method considers decision making as collective construction of common interpretation of available information. Utilization of information is evaluated with respect to operative context. This is made with help of conceptualization of the disturbance situation from the decision making point of view and by construction of operative reference for activity. The latter means conceptualization of the situation from the safety point of view and also consideration of other boundary constraints of decision making, i.e. economical and technical aspects. The analysis method is intended to be used in routine simulator training in nuclear power plants. By virtue of its contextual and dynamical approach it makes the developing nature of activity visible. Cumulation and distribution of knowledge of decision making as developing activity, controlled by orientation and boundary constraints of process control, is expected to improve operational culture of a plant organization. (author). 2 refs, 1 fig

  19. Development of Information Display System for Operator Support in Severe Accident

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kwang Il; Lee, Joon Ku [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    When the severe accident occurs, the technical support center (TSC) performs the mitigation strategy with severe accident management guidelines (SAMG) and communicates with main control room (MCR) operators to obtain information of plant's status. In such circumstances, the importance of an information display for severe accident is increased. Therefore an information display system dedicated to severe accident conditions is required to secure the plant information, to provide the necessary information to MCR operators and TSC operators, and to support the decision using these information. We setup the design concept of severe accident information display system (SIDS) in the previous study and defined its requirements of function and performance. This paper describes the process, results of the identification of the severe accident information for MCR operator and the implementation of SIDS. Further implementation on post-accident monitoring function and data validation function for severe accidents will be accomplished in the future.

  20. The integrated approach methodology for operator information evaluation

    International Nuclear Information System (INIS)

    Stroube, K.; Modarres, M.; Roush, M.; Hunt, N.; Pearce, R.

    1986-01-01

    The Integrated Approach has developed a complete method for evaluating the relative importance of operation information improvements. By use of decision trees the impact of information on success probability of a function or system can be evaluated. This approach couples goal trees and human success likelihoods to estimate anticipated consequences of a given information system

  1. Applying AI tools to operational space environmental analysis

    Science.gov (United States)

    Krajnak, Mike; Jesse, Lisa; Mucks, John

    1995-01-01

    The U.S. Air Force and National Oceanic Atmospheric Agency (NOAA) space environmental operations centers are facing increasingly complex challenges meeting the needs of their growing user community. These centers provide current space environmental information and short term forecasts of geomagnetic activity. Recent advances in modeling and data access have provided sophisticated tools for making accurate and timely forecasts, but have introduced new problems associated with handling and analyzing large quantities of complex data. AI (Artificial Intelligence) techniques have been considered as potential solutions to some of these problems. Fielding AI systems has proven more difficult than expected, in part because of operational constraints. Using systems which have been demonstrated successfully in the operational environment will provide a basis for a useful data fusion and analysis capability. Our approach uses a general purpose AI system already in operational use within the military intelligence community, called the Temporal Analysis System (TAS). TAS is an operational suite of tools supporting data processing, data visualization, historical analysis, situation assessment and predictive analysis. TAS includes expert system tools to analyze incoming events for indications of particular situations and predicts future activity. The expert system operates on a knowledge base of temporal patterns encoded using a knowledge representation called Temporal Transition Models (TTM's) and an event database maintained by the other TAS tools. The system also includes a robust knowledge acquisition and maintenance tool for creating TTM's using a graphical specification language. The ability to manipulate TTM's in a graphical format gives non-computer specialists an intuitive way of accessing and editing the knowledge base. To support space environmental analyses, we used TAS's ability to define domain specific event analysis abstractions. The prototype system defines

  2. Canonical Information Analysis

    DEFF Research Database (Denmark)

    Vestergaard, Jacob Schack; Nielsen, Allan Aasbjerg

    2015-01-01

    is replaced by the information theoretical, entropy based measure mutual information, which is a much more general measure of association. We make canonical information analysis feasible for large sample problems, including for example multispectral images, due to the use of a fast kernel density estimator......Canonical correlation analysis is an established multivariate statistical method in which correlation between linear combinations of multivariate sets of variables is maximized. In canonical information analysis introduced here, linear correlation as a measure of association between variables...... for entropy estimation. Canonical information analysis is applied successfully to (1) simple simulated data to illustrate the basic idea and evaluate performance, (2) fusion of weather radar and optical geostationary satellite data in a situation with heavy precipitation, and (3) change detection in optical...

  3. A posteriori error analysis of multiscale operator decomposition methods for multiphysics models

    International Nuclear Information System (INIS)

    Estep, D; Carey, V; Tavener, S; Ginting, V; Wildey, T

    2008-01-01

    Multiphysics, multiscale models present significant challenges in computing accurate solutions and for estimating the error in information computed from numerical solutions. In this paper, we describe recent advances in extending the techniques of a posteriori error analysis to multiscale operator decomposition solution methods. While the particulars of the analysis vary considerably with the problem, several key ideas underlie a general approach being developed to treat operator decomposition multiscale methods. We explain these ideas in the context of three specific examples

  4. Reactor Operations informal monthly report December 1994

    International Nuclear Information System (INIS)

    1994-12-01

    Reactor operations at the MRR and HFBR reactors at Brookhaven National Laboratory are presented for December 1994. Reactor run-time and power levels, instrumentation, mechanical maintenance, occurrence reports, and safety information are included

  5. A Value Function Approach to Information Operations MOE's: A Preliminary Study

    National Research Council Canada - National Science Library

    Doyle, Michael

    1997-01-01

    A value focused thinking approach is applied to information operations. A preliminary value hierarchy for information operations is constructed by extracting the values of senior military leadership from existing doctrine...

  6. Information Retrieval Using Hadoop Big Data Analysis

    Science.gov (United States)

    Motwani, Deepak; Madan, Madan Lal

    This paper concern on big data analysis which is the cognitive operation of probing huge amounts of information in an attempt to get uncovers unseen patterns. Through Big Data Analytics Applications such as public and private organization sectors have formed a strategic determination to turn big data into cut throat benefit. The primary occupation of extracting value from big data give rise to a process applied to pull information from multiple different sources; this process is known as extract transforms and lode. This paper approach extract information from log files and Research Paper, awareness reduces the efforts for blueprint finding and summarization of document from several positions. The work is able to understand better Hadoop basic concept and increase the user experience for research. In this paper, we propose an approach for analysis log files for finding concise information which is useful and time saving by using Hadoop. Our proposed approach will be applied on different research papers on a specific domain and applied for getting summarized content for further improvement and make the new content.

  7. Integrated information system for analysis of nuclear power plants

    International Nuclear Information System (INIS)

    Galperin, A.

    1994-01-01

    Performing complicated engineering analyses of a nuclear power plant requires storage and manipulation of a large amount of information, both data and knowledge. This information is characterized by its multidisciplinary nature, complexity, and diversity. The problems caused by inefficient and lengthy manual operations involving the data flow management within the frame-work of the safety-related analysis of a power plant can be solved by applying the computer aided engineering principles. These principles are the basis of the design of an integrated information storage system (IRIS). The basic idea is to create a computerized environment, which includes both database and functional capabilities. Consideration and analysis of the data types and required data manipulation capabilities as well as operational requirements, resulted in the choice of an object-oriented data-base management system (OODBMS) as a development platform for solving the software engineering problems. Several advantages of OODBMSs over conventional relations database systems were found of crucial importance, especially providing the necessary flexibility for different data types and extensibility potential. A detailed design of a data model is produced for the plant technical data and for the storage of analysis results. The overall system architecture was designed to assure the feasibility of integrating database capabilities with procedures and functions written in conventional algorithmic programming languages

  8. Analysis of Information Sharing Mechanism in the Food Industry Green Supply Chain Management and Operation Process

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    In order to effectively address the issues of environmental pollution and food safety in food industry,the green supply chain management should be used in the food industry.However,information sharing is the basis of supply chain management.For this purpose,on the basis of describing the connotation of food industry green supply chain management,the paper introduces the contents and the effects of information sharing mode in detail.It focuses on the barriers of the implementation of information-sharing mechanisms in the food industry green supply chain management and operation process and analyzes the necessity of using information sharing mechanism among the members of the food industry green supply chain management mode by game theory,so as to strengthen the competitiveness of enterprises through supply chain management.

  9. Analysis of human factor in operation of nuclear power plants

    International Nuclear Information System (INIS)

    Husseiny, A.A.; Sabri, Z.A.

    1980-01-01

    A taxonomy of operator errors is developed here to provide a scheme for compiling data from field experience according to their significance to the operation and their influence on the plant performance. The reversibility of operator actions is taken as the basis of detection of the relevances of errors to the overall operation. In addition, distinction is made between system errors, such as inadequate instrumentation or logistics, and 'operator errors', which indicate that the operator is involved in inducing an operational error rather than being uniquely responsible for an incident. The developed taxonomy can be used for evaluation of the performance of operators during scheduled training programs. Identification of each class of errors would assist in upgrading performance of operators in a given plant and in filing occurrence reports that help in revising safety provisions or operation procedures. The scheme is suitable for sorting and storing failure information in a data library for ease of retrieval by reliability analysis codes. (orig.) [de

  10. Operator theory a comprehensive course in analysis, part 4

    CERN Document Server

    Simon, Barry

    2015-01-01

    A Comprehensive Course in Analysis by Poincaré Prize winner Barry Simon is a five-volume set that can serve as a graduate-level analysis textbook with a lot of additional bonus information, including hundreds of problems and numerous notes that extend the text and provide important historical background. Depth and breadth of exposition make this set a valuable reference source for almost all areas of classical analysis. Part 4 focuses on operator theory, especially on a Hilbert space. Central topics are the spectral theorem, the theory of trace class and Fredholm determinants, and the study of

  11. Reliability analysis of operator's monitoring behavior in digital main control room of nuclear power plants and its application

    International Nuclear Information System (INIS)

    Zhang Li; Hu Hong; Li Pengcheng; Jiang Jianjun; Yi Cannan; Chen Qingqing

    2015-01-01

    In order to build a quantitative model to analyze operators' monitoring behavior reliability of digital main control room of nuclear power plants, based on the analysis of the design characteristics of digital main control room of a nuclear power plant and operator's monitoring behavior, and combining with operators' monitoring behavior process, monitoring behavior reliability was divided into three parts including information transfer reliability among screens, inside-screen information sampling reliability and information detection reliability. Quantitative calculation model of information transfer reliability among screens was established based on Senders's monitoring theory; the inside screen information sampling reliability model was established based on the allocation theory of attention resources; and considering the performance shaping factor causality, a fuzzy Bayesian method was presented to quantify information detection reliability and an example of application was given. The results show that the established model of monitoring behavior reliability gives an objective description for monitoring process, which can quantify the monitoring reliability and overcome the shortcomings of traditional methods. Therefore, it provides theoretical support for operator's monitoring behavior reliability analysis in digital main control room of nuclear power plants and improves the precision of human reliability analysis. (authors)

  12. Design of a Clinical Information Management System to Support DNA Analysis Laboratory Operation

    Science.gov (United States)

    Dubay, Christopher J.; Zimmerman, David; Popovich, Bradley

    1995-01-01

    The LabDirector system has been developed at the Oregon Health Sciences University to support the operation of our clinical DNA analysis laboratory. Through an iterative design process which has spanned two years, we have produced a system that is both highly tailored to a clinical genetics production laboratory and flexible in its implementation, to support the rapid growth and change of protocols and methodologies in use in the field. The administrative aspects of the system are integrated with an enterprise schedule management system. The laboratory side of the system is driven by a protocol modeling and execution system. The close integration between these two aspects of the clinical laboratory facilitates smooth operations, and allows management to accurately measure costs and performance. The entire application has been designed and documented to provide utility to a wide range of clinical laboratory environments.

  13. Value Informed Conception, Design, Implementation and Operation of Education and Teaching Activities

    DEFF Research Database (Denmark)

    Nielsen, Michael Havbro Faber; Nielsen, Linda

    2017-01-01

    In the present paper we take basis in the basic postulate that the objective of education and teaching is value creation. With this setout we take up two implications, namely: i) decision analysis is the logical choice of management framework for conceiving, designing, implementing and operating ...... (CDIO) education and teaching activities and ii) a thorough, transparent and continuously informed discourse is necessary among all stakeholders to education on what this “value” actually is....

  14. Method of Choosing the Information Technology System Supporting Management of the Military Aircraft Operation

    Directory of Open Access Journals (Sweden)

    Barszcz Piotr

    2014-12-01

    Full Text Available The paper presents a method of choosing the information technology system, the task of which is to support the management process of the military aircraft operation. The proposed method is based on surveys conducted among direct users of IT systems used in aviation of the Polish Armed Forces. The analysis of results of the surveys was conducted using statistical methods. The paper was completed with practical conclusions related to further usefulness of the individual information technology systems. In the future, they can be extremely useful in the process of selecting the best solutions and integration of the information technology systems

  15. Reactor operational transient analysis

    International Nuclear Information System (INIS)

    Shin, W.K.; Chae, S.K.; Han, K.I.; Yang, K.S.; Chung, H. D.; Kim, H.G.; Moon, H.J.; Ryu, Y.H.

    1983-01-01

    To build up efficient capability of safety review and inspection for the nuclear power plants, four area of studies have performed as follows: 1) In order to search the most optimized operating method during load follow operating schemes, automatic control and normal control, are compared each other under the CAOC condition. The analysis performed by DDID code has shown that the reactor has to be controlled by the operator manually during load follow operation. 2) Through the sensitivity analysis by COBRA code, the operating parameters, such as coolant pressure, flow rate, inlet temperature, and power distribution are shown to be important to the determination of DNBR. Expecially, inlet temperature of primary coolant system is appeared as the most senstive parameter on DNBR. 3) FRAPCON code is adapted to study the sensitivity of several operational parameters on the mechanical properties of reactor fuel rod. 4) The calculations procedure which is required to be obtained the neutron fluence at the reactor vessel and the spectrum at the surveillance capsule is established. The results of computation are conpared with those of FSAR and SWRI report and proved its applicability to reactor surveillance program. (Author)

  16. Repository operational criteria analysis

    International Nuclear Information System (INIS)

    Hageman, J.P.; Chowdhury, A.H.

    1992-08-01

    The objective of the ''Repository Operational Criteria (ROC) Feasibility Studies'' (or ROC task) was to conduct comprehensive and integrated analyses of repository design, construction, and operations criteria in 10 CFR Part 60 regulations, considering the interfaces and impacts of any potential changes to those regulations. The study addresses regulatory criteria related to the preclosure aspects of the geologic repository. The study task developed regulatory concepts or potential repository operational criteria (PROC) based on analysis of a repository's safety functions and other regulations for similar facilities. These regulatory concepts or PROC were used as a basis to assess the sufficiency and adequacy of the current criteria in 10 CFR Part 60. Where the regulatory concepts were same as current operational criteria, these criteria were referenced. The operations criteria referenced or the PROC developed are given in this report. Detailed analyses used to develop the regulatory concepts and any necessary PROC for those regulations that may require a minor change are also presented. The results of the ROC task showed a need for further analysis and possible major rule change related to the design bases of a geologic repository operations area, siting, and radiological emergency planning

  17. INFORMATION ARCHITECTURE ANALYSIS USING BUSINESS INTELLIGENCE TOOLS BASED ON THE INFORMATION NEEDS OF EXECUTIVES

    Directory of Open Access Journals (Sweden)

    Fabricio Sobrosa Affeldt

    2013-08-01

    Full Text Available Devising an information architecture system that enables an organization to centralize information regarding its operational, managerial and strategic performance is one of the challenges currently facing information technology. The present study aimed to analyze an information architecture system developed using Business Intelligence (BI technology. The analysis was performed based on a questionnaire enquiring as to whether the information needs of executives were met during the process. A theoretical framework was applied consisting of information architecture and BI technology, using a case study methodology. Results indicated that the transaction processing systems studied did not meet the information needs of company executives. Information architecture using data warehousing, online analytical processing (OLAP tools and data mining may provide a more agile means of meeting these needs. However, some items must be included and others modified, in addition to improving the culture of information use by company executives.

  18. Design of a Clinical Information Management System to Support DNA Analysis Laboratory Operation

    OpenAIRE

    Dubay, Christopher J.; Zimmerman, David; Popovich, Bradley

    1995-01-01

    The LabDirector system has been developed at the Oregon Health Sciences University to support the operation of our clinical DNA analysis laboratory. Through an iterative design process which has spanned two years, we have produced a system that is both highly tailored to a clinical genetics production laboratory and flexible in its implementation, to support the rapid growth and change of protocols and methodologies in use in the field. The administrative aspects of the system are integrated ...

  19. An information offering system for operation support based on plant functional structure

    International Nuclear Information System (INIS)

    Ohga, Yukiharu; Seki, Hiroshi

    1995-01-01

    A plant information offering system was proposed to support operators in their selection and confirmation of the required information for plant operation under transient conditions in nuclear power plants. The system features include an automatic selection method for information and a dialog input method. The former selects plant information in response to plant status changes and operators' demands. The selection is performed based on the knowledge and data as structured by the plant functional structure; i.e. a means-ends abstraction hierarchy model. In the latter, both speech and CRT touch inputs are transformed into words in Japanese to realize an arbitrary input mode combination. The words are analyzed as a sentence before transforming them into a demand for related programs. A prototype system was evaluated using a BWR simulator, assuming abnormal transients such as loss of feedwater. The contents of the offered information were checked based on emergency operation guidelines. It was confirmed that appropriate information items are automatically selected in real time. Answers are generated in reply to the operators' demands. They include information added to reflect the plant conditions. As for dialog, simple and quick input is realized by combining speech and CRT touch according to the operating situation. (author)

  20. Operative and informative nuclear-physical methods for analysis of mineral raw materials and control of technological process

    International Nuclear Information System (INIS)

    Sattarov, G.S.; Muzafarov, A.M.; Komilov, J.M.; Kadirov, F.; Kist, A.A.

    2006-01-01

    Full text: In the Navoi region uranium and gold are mined for more than 35 and 30 years, respectively. Various nuclear-chemical and nuclear-physical analysis methods are applied for elemental analysis of gold and uranium bearing ores and technological elements. The nuclear-physical analysis methods have a number of advantages: high sensitivity, capabilities for simultaneous determination of a number of elements, capabilities for automation of analysis process and their expressness at determination of short-living radionuclides. In the given work the comparative characteristics of nuclear-physical methods are shown applied for operative control of gold, uranium and some other rare elements at technological separation processes by sampling and at continuous flow of crushed ore and solution. They are: control of gold sorption leaching; quality control of ore, gravio- and flotation concentrate; x-ray spectral analysis; x-ray energy disperse analysis; radio-indicator and gamma-absorption analysis methods; neutron-activation analysis with using the ampoule neutron sources; elemental analysis at continuous flow of crushed ore and solution; and others. The analytical capabilities of some developed nuclear-physical research methods, which provide information on for geochemical and technological behaviour of gold, uranium and accompanying elements. Like photo-registration of radioluminescence; neutron-activation autoradiography and radio scanning; natural radiation radiometry; alpha, beta and gamma spectrometry of naturally active samples; determination of form in which the elements are present in sewage and underground waters; study of leachability of elements in dynamical and static conditions; determination of time of products being in technological apparatus. Practical examples are presented showing application of the developed methods for the study of geochemical behaviour of main and accompanying elements; for control of the gold, uranium, and some other rare and

  1. Hanford Environmental Information System (HEIS) Operator`s Manual. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Schreck, R.I.

    1991-10-01

    The Hanford Environmental Information System (HEIS) is a consolidated set of automated resources that effectively manage the data gathered during environmental monitoring and restoration of the Hanford Site. The HEIS includes an integrated database that provides consistent and current data to all users and promotes sharing of data by the entire user community. This manual describes the facilities available to the operational user who is responsible for data entry, processing, scheduling, reporting, and quality assurance. A companion manual, the HEIS User`s Manual, describes the facilities available-to the scientist, engineer, or manager who uses the system for environmental monitoring, assessment, and restoration planning; and to the regulator who is responsible for reviewing Hanford Site operations against regulatory requirements and guidelines.

  2. A quantitative impact analysis of sensor failures on human operator's decision making in nuclear power plants

    International Nuclear Information System (INIS)

    Seong, Poong Hyun

    2004-01-01

    In emergency or accident situations in nuclear power plants, human operators take important roles in generating appropriate control signals to mitigate accident situation. In human reliability analysis (HRA) in the framework of probabilistic safety assessment (PSA), the failure probabilities of such appropriate actions are estimated and used for the safety analysis of nuclear power plants. Even though understanding the status of the plant is basically the process of information seeking and processing by human operators, it seems that conventional HRA methods such as THERP, HCR, and ASEP does not pay a lot of attention to the possibilities of providing wrong information to human operators. In this paper, a quantitative impact analysis of providing wrong information to human operators due to instrument faults or sensor failures is performed. The quantitative impact analysis is performed based on a quantitative situation assessment model. By comparing the situation in which there are sensor failures and the situation in which there are not sensor failures, the impact of sensor failures can be evaluated quantitatively. It is concluded that the impact of sensor failures are quite significant at the initial stages, but the impact is gradually reduced as human operators make more and more observations. Even though the impact analysis is highly dependent on the situation assessment model, it is expected that the conclusions made based on other situation assessment models with be consistent with the conclusion made in this paper. (author)

  3. Receiver operator characteristic (ROC) analysis without truth

    International Nuclear Information System (INIS)

    Henkelman, R.M.; Kay, I.; Bronskill, M.J.

    1990-01-01

    Receiver operator characteristic (ROC) analysis, the preferred method of evaluating diagnostic imaging tests, requires an independent assessment of the true state of disease, which can be difficult to obtain and is often of questionable accuracy. A new method of analysis is described which does not require independent truth data and which can be used when several accurate tests are being compared. This method uses correlative information to estimate the underlying model of multivariate normal distributions of disease-positive and disease-negative patients. The method is shown to give results equivalent to conventional ROC analysis in a comparison of computed tomography, radionuclide scintigraphy, and magnetic resonance imaging for liver metastasis. When independent truth is available, the method can be extended to incorporate truth data or to evaluate the consistency of the truth data with the imaging data

  4. Work Domain Analysis Methodology for Development of Operational Concepts for Advanced Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Hugo, Jacques [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    This report describes a methodology to conduct a Work Domain Analysis in preparation for the development of operational concepts for new plants. This method has been adapted from the classical method described in the literature in order to better deal with the uncertainty and incomplete information typical of first-of-a-kind designs. The report outlines the strategy for undertaking a Work Domain Analysis of a new nuclear power plant and the methods to be used in the development of the various phases of the analysis. Basic principles are described to the extent necessary to explain why and how the classical method was adapted to make it suitable as a tool for the preparation of operational concepts for a new nuclear power plant. Practical examples are provided of the systematic application of the method and the various presentation formats in the operational analysis of advanced reactors.

  5. Design tools for computer-generated display of information to operators

    International Nuclear Information System (INIS)

    O'Brien, J.F.; Cain, D.G.; Sun, B.K.H.

    1985-01-01

    More and more computers are being used to process and display information to operators who control nuclear power plants. Implementation of computer-generated displays in power plant control rooms represents a considerable design challenge for industry designers. Over the last several years, the EPRI has conducted research aimed at providing industry designers tools to meet this new design challenge. These tools provide guidance in defining more 'intelligent' information for plant control and in developing effective displays to communicate this information to the operators. (orig./HP)

  6. Technical information report: Plasma melter operation, reliability, and maintenance analysis

    International Nuclear Information System (INIS)

    Hendrickson, D.W.

    1995-01-01

    This document provides a technical report of operability, reliability, and maintenance of a plasma melter for low-level waste vitrification, in support of the Hanford Tank Waste Remediation System (TWRS) Low-Level Waste (LLW) Vitrification Program. A process description is provided that minimizes maintenance and downtime and includes material and energy balances, equipment sizes and arrangement, startup/operation/maintence/shutdown cycle descriptions, and basis for scale-up to a 200 metric ton/day production facility. Operational requirements are provided including utilities, feeds, labor, and maintenance. Equipment reliability estimates and maintenance requirements are provided which includes a list of failure modes, responses, and consequences

  7. On the Value of Structural Health Monitoring Information for the Operation of Wind Parks

    DEFF Research Database (Denmark)

    Thöns, Sebastian; Faber, Michael H.; Val, Dimitri V.

    2017-01-01

    wind turbine systems and its components is developed accounting for the wind park functionality, i.e. power production, its operation and its cascading damage and failure scenarios. This system model facilitates to quantify the expected benefits and risks throughout the service life accounting......In the present paper, an approach for the quantification of the Value of Structural Health Monitoring (SHM) Information building upon a framework for infrastructure system utility and decision analysis is developed and applied to the operation of wind parks. The quantification of the value of SHM...... facilitates a benefit and risk informed assessment and optimization of SHM strategies and encompasses models for the infrastructure functionality, the structural constituent and system risks and its management as well as the performance of SHM strategies. A wind park system model incorporating the structural...

  8. A remote control system to offer information for nuclear power plant operation

    International Nuclear Information System (INIS)

    Ohga, Yukiharu; Yuchi, Hiroyuki; Arita, Setsuo

    1995-01-01

    A new man-machine system was proposed to simplify input operation so as to get needed plant information and to control information items and output devices for the operator crew, working in a control room. The system controls the shared information for the operator crew, on a large screen display, and private information for individual operators and maintenance personnel, on CRTs, based on the speech input and remote pointing input to the large screen display by a portable pointer, which emits laser beams. The system recognizes the indicating point of the pointer beam by processing the image on the large screen as obtained by an ITV camera. An infrared laser beam and a camera with a visible ray cut filter are used to remove distortion of the image caused by lens aberration, etc. and to provide rapid image processing. The operator performs the input operation while monitoring a cursor displayed by the system. The information items offered and their output devices are automatically determined according to the input operator. A prototype system was developed using three CRTs, one of which served as a substitute for the large screen display. Input to the system is performed using a speech input device and three kinds of pointers; each pointer is identified during image processing based on the number of laser beams emitted. The evaluation test confirmed that precise and smooth input by pointers as well as arbitrary combinations with speech input realized natural dialog without being aware of any waiting time. The appropriate information items were offered to output devices, CRTs and the speech output device, according to the pointers used, namely the input operators. The system can simplify input operation and effectively control the offered information items and output devices in a plant control room. (author)

  9. Operations and Modeling Analysis

    Science.gov (United States)

    Ebeling, Charles

    2005-01-01

    The Reliability and Maintainability Analysis Tool (RMAT) provides NASA the capability to estimate reliability and maintainability (R&M) parameters and operational support requirements for proposed space vehicles based upon relationships established from both aircraft and Shuttle R&M data. RMAT has matured both in its underlying database and in its level of sophistication in extrapolating this historical data to satisfy proposed mission requirements, maintenance concepts and policies, and type of vehicle (i.e. ranging from aircraft like to shuttle like). However, a companion analyses tool, the Logistics Cost Model (LCM) has not reached the same level of maturity as RMAT due, in large part, to nonexistent or outdated cost estimating relationships and underlying cost databases, and it's almost exclusive dependence on Shuttle operations and logistics cost input parameters. As a result, the full capability of the RMAT/LCM suite of analysis tools to take a conceptual vehicle and derive its operations and support requirements along with the resulting operating and support costs has not been realized.

  10. Method and Apparatus Providing Deception and/or Altered Operation in an Information System Operating System

    Science.gov (United States)

    Cohen, Fred; Rogers, Deanna T.; Neagoe, Vicentiu

    2008-10-14

    A method and/or system and/or apparatus providing deception and/or execution alteration in an information system. In specific embodiments, deceptions and/or protections are provided by intercepting and/or modifying operation of one or more system calls of an operating system.

  11. Informational analysis for compressive sampling in radar imaging.

    Science.gov (United States)

    Zhang, Jingxiong; Yang, Ke

    2015-03-24

    Compressive sampling or compressed sensing (CS) works on the assumption of the sparsity or compressibility of the underlying signal, relies on the trans-informational capability of the measurement matrix employed and the resultant measurements, operates with optimization-based algorithms for signal reconstruction and is thus able to complete data compression, while acquiring data, leading to sub-Nyquist sampling strategies that promote efficiency in data acquisition, while ensuring certain accuracy criteria. Information theory provides a framework complementary to classic CS theory for analyzing information mechanisms and for determining the necessary number of measurements in a CS environment, such as CS-radar, a radar sensor conceptualized or designed with CS principles and techniques. Despite increasing awareness of information-theoretic perspectives on CS-radar, reported research has been rare. This paper seeks to bridge the gap in the interdisciplinary area of CS, radar and information theory by analyzing information flows in CS-radar from sparse scenes to measurements and determining sub-Nyquist sampling rates necessary for scene reconstruction within certain distortion thresholds, given differing scene sparsity and average per-sample signal-to-noise ratios (SNRs). Simulated studies were performed to complement and validate the information-theoretic analysis. The combined strategy proposed in this paper is valuable for information-theoretic orientated CS-radar system analysis and performance evaluation.

  12. Preparing the American Soldier in a Brigade Combat Team to Conduct Information Operations in the Contemporary Operational Environment

    National Research Council Canada - National Science Library

    Beckno, Brian T

    2006-01-01

    ...) to conduct Information Operations (IO) in the Contemporary Operational Environment (COE). First, an explanation of IO and its Army applicability is presented using current examples from military operations in Operation Iraqi Freedom (OIF...

  13. Operational Modal Analysis Tutorial

    DEFF Research Database (Denmark)

    Brincker, Rune; Andersen, Palle

    of modal parameters of practical interest - including the mode shape scaling factor - with a high degree of accuracy. It is also argued that the operational technology offers the user a number of advantages over traditional modal testing. The operational modal technology allows the user to perform a modal......In this paper the basic principles in operational modal testing and analysis are presented and discussed. A brief review of the techniques for operational modal testing and identification is presented, and it is argued, that there is now a wide range of techniques for effective identification...

  14. Environmental Quality Information Analysis Center multi-year plan

    International Nuclear Information System (INIS)

    Rivera, R.G.; Das, S.; Walsh, T.E.

    1992-09-01

    An information analysis center (IAC) is a federal resource that provides technical information for a specific technology field. An IAC links an expert technical staff with an experienced information specialist group, supported by in-house or external data bases to provide technical information and maintain a corporate knowledge in a technical area. An IAC promotes the rapid transfer of technology among its users and provides assistance in adopting new technology and predicting and assessing emerging technology. This document outlines the concept, requirements, and proposed development of an Environmental Quality IAC (EQIAC). An EQIAC network is composed of several nodes, each of which has specific technology capabilities. This document outlines strategic and operational objectives for the phased development of one such node of an EQIAC network

  15. User's operating procedures. Volume 3: Projects directorate information programs

    Science.gov (United States)

    Haris, C. G.; Harris, D. K.

    1985-01-01

    A review of the user's operating procedures for the scout project automatic data system, called SPADS is presented. SPADS is the results of the past seven years of software development on a prime mini-computer. SPADS was developed as a single entry, multiple cross-reference data management and information retrieval system for the automation of Project office tasks, including engineering, financial, managerial, and clerical support. This volume, three of three, provides the instructions to operate the projects directorate information programs in data retrieval and file maintenance via the user friendly menu drivers.

  16. User's operating procedures. Volume 1: Scout project information programs

    Science.gov (United States)

    Harris, C. G.; Harris, D. K.

    1985-01-01

    A review of the user's operating procedures for the Scout Project Automatic Data System, called SPADS is given. SPADS is the result of the past seven years of software development on a Prime minicomputer located at the Scout Project Office. SPADS was developed as a single entry, multiple cross reference data management and information retrieval system for the automation of Project office tasks, including engineering, financial, managerial, and clerical support. The instructions to operate the Scout Project Information programs in data retrieval and file maintenance via the user friendly menu drivers is presented.

  17. Management of information for mission operations using automated keyword referencing

    Science.gov (United States)

    Davidson, Roger A.; Curran, Patrick S.

    1993-01-01

    Although millions of dollars have helped to improve the operability and technology of ground data systems for mission operations, almost all mission documentation remains bound in printed volumes. This form of documentation is difficult and timeconsuming to use, may be out-of-date, and is usually not cross-referenced with other related volumes of mission documentation. A more effective, automated method of mission information access is needed. A new method of information management for mission operations using automated keyword referencing is proposed. We expound on the justification for and the objectives of this concept. The results of a prototype tool for mission information access that uses a hypertextlike user interface and existing mission documentation are shared. Finally, the future directions and benefits of our proposed work are described.

  18. Operating plant safety analysis needs

    International Nuclear Information System (INIS)

    Young, M.Y.; Love, D.S.

    1992-01-01

    The primary objective for nuclear power station owners is to operate and manage their plants safely. However, there is also a need to provide economical electric power, which requires that the unit be operated as efficiently as possible, consistent with the safety requirements. The objectives cited above can be achieved through the identification and use of available margins inherent in the plant design. As a result of conservative licensing and analytical approaches taken in the past, many of these margins may be found in the safety analysis limits within which plants currently operate. Improvements in the accuracy of the safety analysis, and a more realistic treatment of plant initial and boundary conditions, can make this margin available for a variety of uses which enhance plant performance, help to reduce O and M costs, and may help to extend licensed operation. Opportunities for improvement exist in several areas in the accident analysis normally performed for Chapter 15 of the FSAR. For example, recent modifications to the ECCS rule, 10CFR50.46 and Appendix K, allow use of margins previously unavailable in the analysis of the Loss of Coolant Accident (LOCA). To take advantage of this regulatory change, new methods are being developed to analyze both the large and small break loss of coolant accident (LOCA). As this margin is used, enhancements in the analysis of other transients will become necessary. The paper discusses accident analysis methods, future development needs, and analysis margin utilization in specific accident scenarios

  19. Implementation of operational meteorological information service for CARE REMDAS

    International Nuclear Information System (INIS)

    Oh, Sung Nam; Nam, Jae Cheol; Choi, Jae Chun; Lee, Byong Lyol; Lee, Bo Ram; Shin, Hyun Cheol; Park, Nan Ah; Song, Chang Keun; Park, Sang Jong

    1999-12-01

    The scope of this study consists of : improve of CARE REMDAS - identification of meteorolgical information required for nuclear emergency response and their efficient use on a real-time basis, review of the production and operation of KMA NWP nodels and their applications. Suggestions on the improvements in nuclear emergency response systme from the care studies of both domestic and foreign countries - case study of a domestic model for radioactivity T/D in terms of model dynamics and operation, investigation of promising support systems by reviewing the current status of T/D model in UK. Recommendations on a promising meteorological information sevices based on foreign cases - examinations of DWD system, including EU for nuclear emergency response, review on the meteorogical information support by DWD for NERS

  20. Implementation of operational meteorological information service for CARE REMDAS

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Sung Nam; Nam, Jae Cheol; Choi, Jae Chun [Meteorological Reaearch Institute, Seoul (Korea, Republic of); Lee, Byong Lyol; Lee, Bo Ram; Shin, Hyun Cheol; Park, Nan Ah [Korea Meteorological Administration, Seoul (Korea, Republic of); Song, Chang Keun; Park, Sang Jong [Seoul National Univ., Seoul (Korea, Republic of)

    1999-12-15

    The scope of this study consists of : improve of CARE REMDAS - identification of meteorolgical information required for nuclear emergency response and their efficient use on a real-time basis, review of the production and operation of KMA NWP nodels and their applications. Suggestions on the improvements in nuclear emergency response systme from the care studies of both domestic and foreign countries - case study of a domestic model for radioactivity T/D in terms of model dynamics and operation, investigation of promising support systems by reviewing the current status of T/D model in UK. Recommendations on a promising meteorological information sevices based on foreign cases - examinations of DWD system, including EU for nuclear emergency response, review on the meteorogical information support by DWD for NERS.

  1. An operational analysis of Lake Surface Water Temperature

    Directory of Open Access Journals (Sweden)

    Emma K. Fiedler

    2014-07-01

    Full Text Available Operational analyses of Lake Surface Water Temperature (LSWT have many potential uses including improvement of numerical weather prediction (NWP models on regional scales. In November 2011, LSWT was included in the Met Office Operational Sea Surface Temperature and Ice Analysis (OSTIA product, for 248 lakes globally. The OSTIA analysis procedure, which has been optimised for oceans, has also been used for the lakes in this first version of the product. Infra-red satellite observations of lakes and in situ measurements are assimilated. The satellite observations are based on retrievals optimised for Sea Surface Temperature (SST which, although they may introduce inaccuracies into the LSWT data, are currently the only near-real-time information available. The LSWT analysis has a global root mean square difference of 1.31 K and a mean difference of 0.65 K (including a cool skin effect of 0.2 K compared to independent data from the ESA ARC-Lake project for a 3-month period (June to August 2009. It is demonstrated that the OSTIA LSWT is an improvement over the use of climatology to capture the day-to-day variation in global lake surface temperatures.

  2. Exploring network operations for data and information networks

    Science.gov (United States)

    Yao, Bing; Su, Jing; Ma, Fei; Wang, Xiaomin; Zhao, Xiyang; Yao, Ming

    2017-01-01

    Barabási and Albert, in 1999, formulated scale-free models based on some real networks: World-Wide Web, Internet, metabolic and protein networks, language or sexual networks. Scale-free networks not only appear around us, but also have high qualities in the world. As known, high quality information networks can transfer feasibly and efficiently data, clearly, their topological structures are very important for data safety. We build up network operations for constructing large scale of dynamic networks from smaller scale of network models having good property and high quality. We focus on the simplest operators to formulate complex operations, and are interesting on the closeness of operations to desired network properties.

  3. Fast reactor operating experience gained in Russia: Analysis of anomalies and abnormal operation cases

    International Nuclear Information System (INIS)

    Ashurko, Y.M.; Baklushin, R.P.; Zagorulko, Y.I.; Ivanenko, V.N.; Matveyev, V.P.; Vasilyev, B.A.

    2000-01-01

    Review of various anomalous events and abnormal operation experience gained in the process of Russian fast reactors operation is given in the paper. The main information refers to the BN-600 demonstration reactor operation. Statistical data on sodium leaks and steam generator failures are presented, and sources of these events and countermeasures taken to avoid their appearance on the operating reactors as well as related changes made in the BN-800 reactor design are considered. In the paper, some features of impurities behaviour are considered in various modes of the BN-600 reactor operation. Information is given on the impurities ingress into the circuits, on abnormal situation emerged in the process of the BN-600 reactor operation and its probable cause. Information is presented on the event related to the increased torque of the BN-600 reactor central rotating column and repair works performed. (author)

  4. Development of efficient system for collection-analysis-application of information using system for technology and information in field of RI-biomics

    International Nuclear Information System (INIS)

    Jang, Sol Ah; Kim, Joo Yeon; Park, Tai Jin

    2015-01-01

    RI-Biomics is the new radiation fusion technology of which, such as the characteristics of radioisotope, is applied to the biomics. In order to sharing and overall analysis of data between the institutions through total management of information in the field of RI-Biomics, RI-Biomics Information portal ‘RIBio-Info’ was constructed by KARA (Korean Association for Radiation Application) in February 2015. For systematic operation of this ‘RIBio-Info’ system, it is required to develop system of collection-analysis-application of information. So, in this paper, we summarized development of document forms at each processes of collection-analysis-application of information and systematization of collection methods of information, establishment of characteristically analysis methods of reports such as issue paper, policy report, global market report and watch report. Therefore, these are expected to improving the practical applicability in this field through the vitalization of technology development of users by achieving the circular structure of collection analysis-application of information

  5. Development of efficient system for collection-analysis-application of information using system for technology and information in field of RI-biomics

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Sol Ah; Kim, Joo Yeon; Park, Tai Jin [Korean Association for Radiation Application, Seoul (Korea, Republic of)

    2015-08-15

    RI-Biomics is the new radiation fusion technology of which, such as the characteristics of radioisotope, is applied to the biomics. In order to sharing and overall analysis of data between the institutions through total management of information in the field of RI-Biomics, RI-Biomics Information portal ‘RIBio-Info’ was constructed by KARA (Korean Association for Radiation Application) in February 2015. For systematic operation of this ‘RIBio-Info’ system, it is required to develop system of collection-analysis-application of information. So, in this paper, we summarized development of document forms at each processes of collection-analysis-application of information and systematization of collection methods of information, establishment of characteristically analysis methods of reports such as issue paper, policy report, global market report and watch report. Therefore, these are expected to improving the practical applicability in this field through the vitalization of technology development of users by achieving the circular structure of collection analysis-application of information.

  6. Scenario-based design: a method for connecting information system design with public health operations and emergency management.

    Science.gov (United States)

    Reeder, Blaine; Turner, Anne M

    2011-12-01

    Responding to public health emergencies requires rapid and accurate assessment of workforce availability under adverse and changing circumstances. However, public health information systems to support resource management during both routine and emergency operations are currently lacking. We applied scenario-based design as an approach to engage public health practitioners in the creation and validation of an information design to support routine and emergency public health activities. Using semi-structured interviews we identified the information needs and activities of senior public health managers of a large municipal health department during routine and emergency operations. Interview analysis identified 25 information needs for public health operations management. The identified information needs were used in conjunction with scenario-based design to create 25 scenarios of use and a public health manager persona. Scenarios of use and persona were validated and modified based on follow-up surveys with study participants. Scenarios were used to test and gain feedback on a pilot information system. The method of scenario-based design was applied to represent the resource management needs of senior-level public health managers under routine and disaster settings. Scenario-based design can be a useful tool for engaging public health practitioners in the design process and to validate an information system design. Copyright © 2011 Elsevier Inc. All rights reserved.

  7. A method for risk informing procedures at operating nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, P. F.; Martin del Campo, C., E-mail: pnelson_007@yahoo.com [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac No. 8532, Col. Progreso, 62550 Jiutepec, Morelos (Mexico)

    2012-10-15

    The technical approach presented establishes a framework intended to provide the necessary elements for a deployable human performance monitoring program that incorporates insights from plant specific probabilistic risk assessments, human reliability analysis, as well as the development of plant specific human failure data. A human performance monitoring program of this structure would be used to provide the ability to risk inform procedures (e.g., operations or maintenance) to determine the operational risk significance of procedural performance (i.e., precautions, prerequisites, procedure steps), the likelihood of consequential human error dur the performance of the procedure, and the identification of procedure specific barriers to reduce or eliminate consequential human errors. The program would provide the means to assess procedures prior to execution and the means to record and trend human failure events leading to a plant specific human failure database for human activities characterized as pre-initiator. The technical methods and data processing for each of these areas are developed and presented, as well as an example application of an operational procedure error leading to a plant level event (i.e, plant trip). (Author)

  8. Noncommutative analysis, operator theory and applications

    CERN Document Server

    Cipriani, Fabio; Colombo, Fabrizio; Guido, Daniele; Sabadini, Irene; Sauvageot, Jean-Luc

    2016-01-01

    This book illustrates several aspects of the current research activity in operator theory, operator algebras and applications in various areas of mathematics and mathematical physics. It is addressed to specialists but also to graduate students in several fields including global analysis, Schur analysis, complex analysis, C*-algebras, noncommutative geometry, operator algebras, operator theory and their applications. Contributors: F. Arici, S. Bernstein, V. Bolotnikov, J. Bourgain, P. Cerejeiras, F. Cipriani, F. Colombo, F. D'Andrea, G. Dell'Antonio, M. Elin, U. Franz, D. Guido, T. Isola, A. Kula, L.E. Labuschagne, G. Landi, W.A. Majewski, I. Sabadini, J.-L. Sauvageot, D. Shoikhet, A. Skalski, H. de Snoo, D. C. Struppa, N. Vieira, D.V. Voiculescu, and H. Woracek.

  9. Information Flow Analysis of Level 4 Payload Processing Operations

    Science.gov (United States)

    Danz, Mary E.

    1991-01-01

    The Level 4 Mission Sequence Test (MST) was studied to develop strategies and recommendations to facilitate information flow. Recommendations developed as a result of this study include revised format of the Test and Assembly Procedure (TAP) document and a conceptualized software based system to assist in the management of information flow during the MST.

  10. The European reliability data system. An organized information exchange on the operation of European nuclear reactors

    International Nuclear Information System (INIS)

    Mancini, G.; Amesz, J.; Bastianini, P.; Capobianchi, S.

    1983-01-01

    The paper revises the aims and objectives of the European Reliability Data System (ERDS), a centralized system collecting and organizing, at European level, information related to the operation of LWRs. The ERDS project was started in 1977 and after a preliminary feasibility study that ended in 1979 is now proceeding towards the final design and implementation stages. ERDS exploits information collected in national data systems and information deriving from single reactor sources. The paper describes first the development of the four data banks constituting the system: Component Event Data Bank, CEDB; Abnormal Occurrences Reporting System, AORS; Operating Unit Status Report, OUSR; and Generic Reliability Parameter Data Bank, GRPDB. Several typical aspects concerning the project are then outlined from the need of homogeneization of data and therefore the need for setting up reference classifications, to the problem of data transcoding and input into the system. Furthermore, the need is stressed of involving much more deeply nuclear power plant operators into the process of data acquisition by providing them with a useful feedback from the data analysis. (author)

  11. Probabilistic aspects of analysis and information operation of the system in situations of conflict

    Directory of Open Access Journals (Sweden)

    S. V. Gluschenko

    2012-01-01

    Full Text Available The problems of research of the parameters interaction structure and the conflict formation are considered in the stochastic systems by the general system theory. The mathematical aspects of relations conflict, promotion and indifference are analyzed. We consider the information approach for the analysis of the conflict.

  12. A work process and information flow description of control room operations

    International Nuclear Information System (INIS)

    Davey, E.; Matthews, G.

    2007-01-01

    The control room workplace is the location from which all plant operations are supervised and controlled on a shift-to-shift basis. The activities comprising plant operations are structured into a number of work processes, and information is the common currency that is used to convey work requirements, communicate business and operating decisions, specify work practice, and describe the ongoing plant and work status. This paper describes the motivation for and early experience with developing a work process and information flow model of CANDU control room operations, and discusses some of the insights developed from model examination that suggest ways in which changes in control centre work specification, organization of resources, or asset layout could be undertaken to achieve operational improvements. (author)

  13. Information needs in nuclear power plants during low power operation modes

    Energy Technology Data Exchange (ETDEWEB)

    Tommila, Teemu; Fantoni, Paolo F.; Zander, Ralf M.

    1998-02-01

    During the past few years an increasing attention has been paid to the safety of shutdown and refuelling operations. It has turned out that the risks during shutdown may be comparable to the risks of power operation. The goal of this report is to identify information requirements related to low power operating modes of nuclear power plants. These include, for example, warm and cold shutdowns, refuelling and maintenance, as well as related state transitions such as start-up and shut-down. The focus of the report is on planned refuelling outages and the role of the control room in managing the outage activities. As a starting point, the basic terminology and characteristics of low power operation are discussed. The current situation at nuclear power plants and some recent developments in information technology are reviewed. End-users' requirements and enabling technologies are combined in order to identify the opportunities for new information technology tools in low power operation. The required features of process control systems and maintenance information systems are described. Common plant modelling techniques, open software architectures and functional structuring of the process control system are suggested to be the key issues in the long-term development of operator support systems. On a shorter time scale, new tools solving limited practical problems should be developed and evaluated. This would provide a basis for the features needed for low power operation, including for example, outage planning, on-line risk monitoring, management of outage tasks, adaptive alarm handling, computerised procedures and task-oriented human interfaces. (author)

  14. 47 CFR 64.707 - Public dissemination of information by providers of operator services.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Public dissemination of information by providers of operator services. 64.707 Section 64.707 Telecommunication FEDERAL COMMUNICATIONS COMMISSION... § 64.707 Public dissemination of information by providers of operator services. Providers of operator...

  15. Red Team Operations to Assess Information Technology Vulnerabilities

    NARCIS (Netherlands)

    Veltman, M.; Parker, R.L.

    1999-01-01

    All Information and Communication Technology (ICT) systems have vulnerabilities. Weaknesses in these systems are introduced either during the specification, implementation or operational phase. Leaving aside these introduced vulnerabilities are intentional or unintentional, the fact remains that

  16. AN ANALYSIS OF SALES INFORMATION SYSTEM AND COMPETITIVE ADVANTAGE (Study Case of UD. Citra Helmet

    Directory of Open Access Journals (Sweden)

    Hendra Alianto

    2012-10-01

    Full Text Available Business development in this era of globalization leads companies to use information system in running business relationship by changing the traditional way of working in non-integrated information systems into integrated information systems. The intended use of the integrated information system will improve the effective and efficient way of working, such as the availability of information in real-time, accurate and informative for decision-making for the benefit of operational activities, as well as decision-making for strategic interests and the company’s business development. Especially with the application of sales information system, it will improve the company’s performance and will affect the competitiveness of companies, which can ultimately increase the maximum profit. However, in reality it is not easy to implement the integrated information system, because it is influenced by the customs, culture and mindset of the user company. It is necessary for running system analysis activity and building an integrated information system by concerning into the needs of users, management, customers and stakeholders. The implementation of integrated information system will increase productivity and achieve the effectiveness and efficiency level of company’s operations, through the analysis of sales information system will affect the competitiveness of companies.Keywords: Sales Information System Analysis

  17. Identification of the operating crew's information needs for accident management

    International Nuclear Information System (INIS)

    Nelson, W.R.; Hanson, D.J.; Ward, L.W.; Solberg, D.E.

    1988-01-01

    While it would be very difficult to predetermine all of the actions required to mitigate the consequences of every potential severe accident for a nuclear power plant, development of additional guidance and training could improve the likelihood that the operating crew would implement effective sever-accident management measures. The US Nuclear Regulatory Commission (NRC) is conducting an Accident Management Research Program that emphasizes the application of severe-accident research results to enhance the capability of the plant operating crew to effectively manage severe accidents. One element of this program includes identification of the information needed by the operating crew in severe-accident situations. This paper discusses a method developed for identifying these information needs and its application. The methodology has been applied to a generic reactor design representing a PWR with a large dry containment. The information needs were identified by systematically determining what information is needed to assess the health of the critical functions, identify the presence of challenges, select strategies, and assess the effectiveness of these strategies. This method allows the systematic identification of information needs for a broad range of severe-accident scenarios and can be validated by exercising the functional models for any specific event sequence

  18. Analysis of information security reliability: A tutorial

    International Nuclear Information System (INIS)

    Kondakci, Suleyman

    2015-01-01

    This article presents a concise reliability analysis of network security abstracted from stochastic modeling, reliability, and queuing theories. Network security analysis is composed of threats, their impacts, and recovery of the failed systems. A unique framework with a collection of the key reliability models is presented here to guide the determination of the system reliability based on the strength of malicious acts and performance of the recovery processes. A unique model, called Attack-obstacle model, is also proposed here for analyzing systems with immunity growth features. Most computer science curricula do not contain courses in reliability modeling applicable to different areas of computer engineering. Hence, the topic of reliability analysis is often too diffuse to most computer engineers and researchers dealing with network security. This work is thus aimed at shedding some light on this issue, which can be useful in identifying models, their assumptions and practical parameters for estimating the reliability of threatened systems and for assessing the performance of recovery facilities. It can also be useful for the classification of processes and states regarding the reliability of information systems. Systems with stochastic behaviors undergoing queue operations and random state transitions can also benefit from the approaches presented here. - Highlights: • A concise survey and tutorial in model-based reliability analysis applicable to information security. • A framework of key modeling approaches for assessing reliability of networked systems. • The framework facilitates quantitative risk assessment tasks guided by stochastic modeling and queuing theory. • Evaluation of approaches and models for modeling threats, failures, impacts, and recovery analysis of information systems

  19. Standardizing the information architecture for spacecraft operations

    Science.gov (United States)

    Easton, C. R.

    1994-01-01

    This paper presents an information architecture developed for the Space Station Freedom as a model from which to derive an information architecture standard for advanced spacecraft. The information architecture provides a way of making information available across a program, and among programs, assuming that the information will be in a variety of local formats, structures and representations. It provides a format that can be expanded to define all of the physical and logical elements that make up a program, add definitions as required, and import definitions from prior programs to a new program. It allows a spacecraft and its control center to work in different representations and formats, with the potential for supporting existing spacecraft from new control centers. It supports a common view of data and control of all spacecraft, regardless of their own internal view of their data and control characteristics, and of their communications standards, protocols and formats. This information architecture is central to standardizing spacecraft operations, in that it provides a basis for information transfer and translation, such that diverse spacecraft can be monitored and controlled in a common way.

  20. On Stability of Open-Loop Operation without Rotor Information for Brushless DC Motors

    Directory of Open Access Journals (Sweden)

    Zhong Wu

    2014-01-01

    Full Text Available Open-loop operation mode is often used to control the Brushless DC Motors (BLDCMs without rotor position sensors when the back electromotive force (EMF is too weak due to the very low rotor velocity. The rotor position information is not necessary in this mode and the stator windings are supplied with voltages under a certain ratio of the amplitude to the frequency. However, the rotor synchronization will be destroyed once if the commutation instant is inappropriate. In order to improve the reliability of the open-loop operation mode, a dynamic equation is established to represent the synchronization error between the rotor and the stator. Thereafter, the stability of the open-loop control mode is analyzed by using Lyapunov indirect method. Theoretical analysis indicates that the open-loop control mode is asymptotically stable only when the commutation instant of the stator current lags behind the ideal one suitably. Finally, theoretical analysis is verified through the experimental results of a certain BLDCM.

  1. Information Operations: Countering the Asymmetric Threat to the United States

    National Research Council Canada - National Science Library

    McKeown, Wendell

    1999-01-01

    .... The cornerstone of Joint Vision 2010 is information superiority. Every facet of future military operations will be critically linked to an aggregate cyber network that relies on critical national infrastructures to provide for information superiority...

  2. Target Bosnia: Integrating Information Activities in Peace Operations. NATO-Led Operations in Bosnia-Herzegovina, December 1995-1997

    National Research Council Canada - National Science Library

    Siegel, Pascale C

    1998-01-01

    This monograph examines the role of information in Peace Support Operations (PSO) and its impact on command and control through the prism of NATO-led operations in Bosnia-Herzegovina from December 1995 into 1997...

  3. Experience in performing trends and patterns analysis of nuclear power plant operational data

    International Nuclear Information System (INIS)

    Novak, T.M.; Williams, M.H.; Dennig, R.L.

    1990-01-01

    The Office for Analysis and Evaluation of Operational Data (AEOD) of the U.S. Nuclear Regulatory Commission (USNRC) has conducted a formal trends and patterns program since 1982. Since that time, the methods and end products of the program have evolved through experience and changes in the environment for trends and patterns analysis, i.e., increasing regulatory emphasis on operations and balance of plant performance, emergence of performance indicators, the availability of personal computer hardware and software to perform analysis, and changes in the information reported to the USNRC. This paper discusses the technical milestones of the AEOD trends and patterns program in terms of: 1) Sources of operational data, e.g., pre- and post- 1984 Licensee Event Reports, NPRDS, 2) Data storage and retrieval, e.g., Sequence Coding and Search System (SCSS), 3) Statistical methods, e.g., contingency table analysis, 4) Types of results. The paper summarizes the major lessons learned in the process of implementing a trends and patterns program and outlines future direction

  4. Activity-Based Information Integrating the operations strategy

    Directory of Open Access Journals (Sweden)

    José Augusto da Rocha de Araujo

    2005-12-01

    Full Text Available In the globalized world, companies seek for new operations strategies to ensure world corporate success. This article analyzes how the cost management models – both traditional and activity-based, aid the planning and management of corporate globalized operations. The efficacy of the models application depends on their alignment with the competitive strategy. Companies must evaluate the nature of the competition and its competitive priorities; they should then define the necessary and sufficient dependence level on costs information. In this article, three dependence levels are presented: operational, decision support and strategic control. The result of the research shows the importance of alignment between the cost management model and the competitive strategy for corporate success, and confirms the adequacy of the activity-based costing model as a supporting tool for decision taking in a global strategy. Case studies in world class companies in Brazil are presented.

  5. User's operating procedures. Volume 2: Scout project financial analysis program

    Science.gov (United States)

    Harris, C. G.; Haris, D. K.

    1985-01-01

    A review is presented of the user's operating procedures for the Scout Project Automatic Data system, called SPADS. SPADS is the result of the past seven years of software development on a Prime mini-computer located at the Scout Project Office, NASA Langley Research Center, Hampton, Virginia. SPADS was developed as a single entry, multiple cross-reference data management and information retrieval system for the automation of Project office tasks, including engineering, financial, managerial, and clerical support. This volume, two (2) of three (3), provides the instructions to operate the Scout Project Financial Analysis program in data retrieval and file maintenance via the user friendly menu drivers.

  6. Human factors review of electric power dispatch control centers. Volume 4. Operator information needs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, R.J.; Najaf-Zadeh, K.; Darlington, H.T.; McNair, H.D.; Seidenstein, S.; Williams, A.R.

    1982-10-01

    Human factors is a systems-oriented interdisciplinary specialty concerned with the design of systems, equipment, facilities and the operational environment. An important aspect leading to the design requirements is the determination of the information requirements for electric power dispatch control centers. There are significant differences between the system operator's actions during normal and degraded states of power system operation, and power system restoration. This project evaluated the information the operator requires for normal power system and control system operations and investigates the changes of information required by the operator as the power system and/or the control system degrades from a normal operating state. The Phase II study, published in two volumes, defines power system states and control system conditions to which operator information content can be related. This volume presents detailed data concerning operator information needs that identify the needs for and the uses of power system information by a system operator in conditions ranging from normal through degraded operation. The study defines power system states and control system conditions to which operator information content can be related, and it identifies the requisite information as consistent with current industry practice so as to aid control system designers. Training requirements are also included for planning entry-level and follow-on training for operators.

  7. Towards a Structurational Theory of Information Systems: a substantive case analysis

    DEFF Research Database (Denmark)

    Rose, Jeremy; Hackney, R. H

    2003-01-01

    This paper employs the analysis of an interpretive case study within a Regional Train Operating Company (RTOC) to arrive at theoretical understandings of Information Systems (IS). Giddens’ ‘structuration theory’ is developed which offers an account of structure and agency; social practices develo...

  8. New Ways in the Cognitive Dimension of Information Operations

    Directory of Open Access Journals (Sweden)

    Haig Zsolt

    2017-06-01

    Full Text Available In this paper the authors introduce the cognitive dimension that is becoming more and more important in the field of information operations with special regard to psychological operations (PSYOPS. The strengthening role of influencing skills and technological progress has created new avenues and opportunities in the military field. The paper seeks to point out the relationship between marketing and PSYOPS. In connection with this, the study intends to present a new approach to PSYOPS that can achieve the operational goals which set by the leader by applying guerrilla marketing tools and methods.

  9. Office for Analysis and Evaluation of Operational Data

    International Nuclear Information System (INIS)

    1993-10-01

    The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1992. The report is published in two separate parts. NUREG-1272, Vol. 7, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. NUREG-1272, Vol. 7, No. 2, covers nonreactors and presents a review of the events and concerns during 1992 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Both reports also contain a discussion of the Incident Investigation Team program and summarize both the Incident Investigation Team and Augmented Inspection Team reports. Each volume contains a list of the AEOD reports issued for 1981--1992

  10. On Formal and Informal Factors: Enabling Learning for Safe Offshore Drilling Operations

    Directory of Open Access Journals (Sweden)

    Trygve J. Steiro

    2017-12-01

    Full Text Available Traditional safety thinking has been concerned with investigating accident causations in order to learn from these. However, successful operations constitute the great majority of all the operations. It would thus be interesting to add a focus towards learning from operations that go well. The purpose of the current study is to identify factors that might contribute to successful operations in terms of safety. This purpose is approached by an empirical study consisting of 10 interviews with people who work on board a drilling rig currently operating in Norway. The informants who participated in the interviews hold different positions and come from different companies represented on board the rig. The findings in this study show that it can be difficult to characterize or define successful operations. The definition will be subjective; however, there are some common features of successful operations. Maintaining the life and health of people are the number one priority. A successful operation should also result in the intended product even though it might take some more time than planned. A successful operation is created by many factors and conditions. This study identified 27 factors that might contribute to successful operations in terms of safety. A lot of the theory explaining successful operations focuses on informal factors related to humans and their actions. However, the findings in this study implies that there must be both formal and informal factors present.

  11. Improving Water Resources System Operation by Direct Use of Hydroclimatic Information

    Science.gov (United States)

    Castelletti, A.; Pianosi, F.

    2011-12-01

    It is generally agreed that more information translates into better decisions. For instance, the availability of inflow predictions can improve reservoir operation; soil moisture data can be exploited to increase irrigation efficiency; etc. However, beyond this general statement, many theoretical and practical questions remain open. Provided that not all information sources are equally relevant, how does their value depend on the physical features of the water system and on the purposes of the system operation? What is the minimum lead time needed for anticipatory management to be effective? How does uncertainty in the information propagates through the modelling chain from hydroclimatic data through descriptive and decision models, and finally affect the decision? Is the data-predictions-decision paradigm truly effective or would it be better to directly use hydroclimatic data to take optimal decisions, skipping the intermediate step of hydrological forecasting? In this work we investigate these issues by application to the management of a complex water system in Northern Vietnam, characterized by multiple, conflicting objectives including hydropower production, flood control and water supply. First, we quantify the value of hydroclimatic information as the improvement in the system performances that could be attained under the (ideal) assumption of perfect knowledge of all future meteorological and hydrological input. Then, we assess and compare the relevance of different candidate information (meteorological or hydrological observations; ground or remote data; etc.) for the purpose of system operation by novel Input Variable Selection techniques. Finally, we evaluate the performance improvement made possible by the use of such information in re-designing the system operation.

  12. Development of the operational information processing platform

    International Nuclear Information System (INIS)

    Shin, Hyun Kook; Park, Jeong Seok; Baek, Seung Min; Kim, Young Jin; Joo, Jae Yoon; Lee, Sang Mok; Jeong, Young Woo; Seo, Ho Jun; Kim, Do Youn; Lee, Tae Hoon

    1996-02-01

    The Operational Information Processing Platform(OIPP) is platform system which was designed to provide the development and operation environments for plant operation and plant monitoring. It is based on the Plant Computer Systems (PCS) of Yonggwang 3 and 4, Ulchin 3 and 4, and Yonggwang 5 and 6 Nuclear Power Plants (NPP). The UNIX based workstation, real time kernel and graphics design tool are selected and installed through the reviewing the function of PCS. In order to construct the development environment for open system architecture and distributed computer system, open computer system architecture was adapted both in hardware and software. For verification of system design and evaluation of technical methodologies, the PCS running under the OIPP is being designed and implemented. In this system, the man-machine interface and system functions are being designed and implemented to evaluate the differences between the UCN 3, 4 PCS and OIPP. 15 tabs., 32 figs., 11 refs. (Author)

  13. Mobile Geospatial Information Systems for Land Force Operations: Analysis of Operational Needs and Research Opportunities

    Science.gov (United States)

    2010-03-01

    road barriers (e.g., dragon teeth) and searches vehicles for weapons and proper license plates. The rifleman also escorts VIPs after conveying the...Are there automated systems that know that in X scenario, operator Y would want to see Z , or is there an exhaustive list of options that the operator...directional) or a trackball (moves in any direction). Selection is made my depressing the wheel/ ball . • Keyboard – The size of the keyboard can

  14. Quantitative assessment of information load on control room operator in emergency situations

    International Nuclear Information System (INIS)

    Filshtein, E.L.

    1986-01-01

    The information processing by the operator in reading-from-display mode is addressed with the following conclusions: 1) The information measure which is needed should be translatable into the time requirements and as such, should reflect the peculiarities associated with mental information processing abilities. 2) The Information Processing Unit (IPU) is introduced as a measure that reflects the peculiarities and, therefore, is better than the Information Entropy unit (H) for the problem under consideration. 3) All the messages that the operator might encounter are classified as belonging to one of three types, and the amount of processing information is quantified in the Information Processing Units (IPU). 4) A pilot study has been conducted to verify underlined assumptions and to evaluate the rate of information processing in reading-from-display mode

  15. Analysis on Joint Operational Capability in the Condition of Information and Psychological Warfares%信息心理对抗条件下联合作战能力分析

    Institute of Scientific and Technical Information of China (English)

    闫家传; 秦伟; 陈璐; 张仁友

    2011-01-01

    In the information age, operational capabilities of troops include firepower, defense power, maintainance power, information power and many other factors, and the warfares between the opponents represent force confrontation, psychological confrontation, information warfares and many other complex forms. Based on the quantity analysis of joint operational capability, mutual functional mechanism of information, psychology and combat power is analyzed, and three feedback loops of operational confrontation, information warfares and psychological warfares are educed, and then system dynamical models are established, and effects on joint operational capability by information, psychology and other factors are deduced in the prospect of quantity.%信息化条件下作战,部队的作战能力表现为包括火力、防护力、保障力、信息力等多种因素的联合作战能力,作战双方的对抗表现为兵力对抗,心理对抗,信息对抗等多种复杂的形式.在联合作战能力量化分析基础上,分析了信息、心理和战斗力相互作用机制,得出了战斗对抗、信息对抗、心理对抗3个反馈回路环,并据此建立了系统动力学模型,从定量的角度分析了信息、心理等因素对联合作战能力的影响.

  16. Environmental analysis of the operation of Oak Ridge National Laboratory (X-10 site)

    Energy Technology Data Exchange (ETDEWEB)

    Boyle, J.W.; Blumberg, R.; Cotter, S.J.

    1982-11-01

    An environmental analysis of the operation of the Oak Ridge National Laboratory (ORNL) facilities in Bethel Valley and Melton Valley was conducted to present to the public information concerning the extent to which recognizable effects, or potential effects, on the environment may occur. The analysis addresses current operations of the ORNL X-10 site and completed operations that may continue to have residual effects. Solid wastes from ORNL operations at the Y-12 site which are transported to the X-10 site for burial (e.g., Biology Division animal wastes) are included as part of X-10 site operation. Socioeconomic effects are associated primarily with the communities where employees live and with the Knoxville Bureau of Economic Analysis economic area as a whole. Therefore, ORNL employees at both Y-12 and X-10 sites are included in the ORNL socioeconomic impact analysis. An extensive base of environmental data was accumulated for this report. Over 80 reports related to ORNL facilities and/or operations are cited as well as many open-literature citations. Environmental effects of the operation of ORNL result from operational discharges from the onsite facilities; construction and/or modification of facilities, transportation to and from the site of persons, goods and services; socioeconomic impacts to the local, regional, and general population; and accidental discharges if they should occur. Operational discharges to the environnment are constrained by federal, state, and local regulations and by criteria established by the US Department of Energy to minimize adverse impacts. It is the purpose of this document to evaluate the operation of the ORNL insofar as impacts beyond the site boundary may occur or have the potential for occurrence.

  17. Environmental analysis of the operation of Oak Ridge National Laboratory (X-10 site)

    International Nuclear Information System (INIS)

    Boyle, J.W.; Blumberg, R.; Cotter, S.J.

    1982-11-01

    An environmental analysis of the operation of the Oak Ridge National Laboratory (ORNL) facilities in Bethel Valley and Melton Valley was conducted to present to the public information concerning the extent to which recognizable effects, or potential effects, on the environment may occur. The analysis addresses current operations of the ORNL X-10 site and completed operations that may continue to have residual effects. Solid wastes from ORNL operations at the Y-12 site which are transported to the X-10 site for burial (e.g., Biology Division animal wastes) are included as part of X-10 site operation. Socioeconomic effects are associated primarily with the communities where employees live and with the Knoxville Bureau of Economic Analysis economic area as a whole. Therefore, ORNL employees at both Y-12 and X-10 sites are included in the ORNL socioeconomic impact analysis. An extensive base of environmental data was accumulated for this report. Over 80 reports related to ORNL facilities and/or operations are cited as well as many open-literature citations. Environmental effects of the operation of ORNL result from operational discharges from the onsite facilities; construction and/or modification of facilities, transportation to and from the site of persons, goods and services; socioeconomic impacts to the local, regional, and general population; and accidental discharges if they should occur. Operational discharges to the environnment are constrained by federal, state, and local regulations and by criteria established by the US Department of Energy to minimize adverse impacts. It is the purpose of this document to evaluate the operation of the ORNL insofar as impacts beyond the site boundary may occur or have the potential for occurrence

  18. AEOD (Office for Analysis and Evaluation of Operational Data)

    International Nuclear Information System (INIS)

    1989-06-01

    The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1988. The report is published in two separate parts. The report is published in two separate parts. NUREG-1272, Vol. 3, No. 1, covers Power Reactors and presents an overview of the operating experience of the nuclear power industry, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from Licensee Event Reports, Diagnostic Evaluations, and reports to the NRC's Operations Center. NUREG-1272, Vol. 3, No. 2, covers Nonreactors and presents a review of the nonreactor events and misadministrations that were reported in 1988 and a brief synopsis of AEOD studies published in 1988. Each volume contains a list of the AEOD reports issued for 1980--1988. 15 figs., 10 tabs

  19. Process hazards analysis (PrHA) program, bridging accident analyses and operational safety

    International Nuclear Information System (INIS)

    Richardson, J.A.; McKernan, S.A.; Vigil, M.J.

    2003-01-01

    Recently the Final Safety Analysis Report (FSAR) for the Plutonium Facility at Los Alamos National Laboratory, Technical Area 55 (TA-55) was revised and submitted to the US. Department of Energy (DOE). As a part of this effort, over seventy Process Hazards Analyses (PrHAs) were written and/or revised over the six years prior to the FSAR revision. TA-55 is a research, development, and production nuclear facility that primarily supports US. defense and space programs. Nuclear fuels and material research; material recovery, refining and analyses; and the casting, machining and fabrication of plutonium components are some of the activities conducted at TA-35. These operations involve a wide variety of industrial, chemical and nuclear hazards. Operational personnel along with safety analysts work as a team to prepare the PrHA. PrHAs describe the process; identi fy the hazards; and analyze hazards including determining hazard scenarios, their likelihood, and consequences. In addition, the interaction of the process to facility systems, structures and operational specific protective features are part of the PrHA. This information is rolled-up to determine bounding accidents and mitigating systems and structures. Further detailed accident analysis is performed for the bounding accidents and included in the FSAR. The FSAR is part of the Documented Safety Analysis (DSA) that defines the safety envelope for all facility operations in order to protect the worker, the public, and the environment. The DSA is in compliance with the US. Code of Federal Regulations, 10 CFR 830, Nuclear Safety Management and is approved by DOE. The DSA sets forth the bounding conditions necessary for the safe operation for the facility and is essentially a 'license to operate.' Safely of day-to-day operations is based on Hazard Control Plans (HCPs). Hazards are initially identified in the PrI-IA for the specific operation and act as input to the HCP. Specific protective features important to worker

  20. Improving CANDU plant operation and maintenance through retrofit information technology systems

    International Nuclear Information System (INIS)

    Lupton, L.R.; Judd, R.A.; MacBeth, M.J.

    1998-01-01

    CANDU plant owners are facing an increasingly competitive environment for the generation of electricity. To meet this challenge, all owners have identified that information technology offers opportunities for significant improvements in CANDU operation, maintenance and administration (OM and A) costs. Targeted information technology application areas include instrumentation and control, engineering, construction, operations and plant information management. These opportunities also pose challenges and issues that must be addressed if the full benefits of the advances in information technology are to be achieved. Key among these are system hardware and software maintenance, and obsolescence protection; AECL has been supporting CANDU stations with the initial development and evaluation of systems to improve plant performance and cost. Key initiatives that have been implemented or are in the process of being implemented in some CANDU plants to achieve operational benefits include: critical safety parameter monitor system; advanced computerized annunciation system; plant historical data system; and plant display system. Each system will be described in terms of its role in enhancing current CANDU plant performance and how they will contribute to future CANDU plant performance

  1. Development of contextual task analysis for NPP control room operators' work

    International Nuclear Information System (INIS)

    Hukki, K.

    1998-01-01

    The paper introduces a contextual approach to task analysis concerning control room operators' tasks and task conditions in nuclear power plants. The approach is based on the ecological concept of the situational appropriateness of activity. The task demands are dependent on the ultimate task of the operators which is to maintain the critical safety functions of the process. The context also sets boundary conditions to the fulfilment of these demands. The conceptualisation of the context affords possibilities to comprehend and make visible the core demands of the operators' work. Characteristic to the approach is that the conceptualisation is made both from the point of the operators who are making interpretations of the situation and from the point of the process to be controlled. The context is described as a world of operators' possibilities and constraints and, at the same time, in relation to the demands set by the nature of the process. The method is under development and has been applied in simulator training, in the evaluation of the control room information and in the integrated development of reliability analysis. The method emphasizes the role of explicit conceptualisation of the task situations. Explicity enhances its role as a conceptual tool and, therefore, promotes common awareness in these domains. (orig.)

  2. Methods and apparatuses for information analysis on shared and distributed computing systems

    Science.gov (United States)

    Bohn, Shawn J [Richland, WA; Krishnan, Manoj Kumar [Richland, WA; Cowley, Wendy E [Richland, WA; Nieplocha, Jarek [Richland, WA

    2011-02-22

    Apparatuses and computer-implemented methods for analyzing, on shared and distributed computing systems, information comprising one or more documents are disclosed according to some aspects. In one embodiment, information analysis can comprise distributing one or more distinct sets of documents among each of a plurality of processes, wherein each process performs operations on a distinct set of documents substantially in parallel with other processes. Operations by each process can further comprise computing term statistics for terms contained in each distinct set of documents, thereby generating a local set of term statistics for each distinct set of documents. Still further, operations by each process can comprise contributing the local sets of term statistics to a global set of term statistics, and participating in generating a major term set from an assigned portion of a global vocabulary.

  3. Integrated real-time information to use in commercial, logistics and operational activities provide by the national control center operation of Transpetro

    Energy Technology Data Exchange (ETDEWEB)

    Aniceto, Hello A. R. [National Control Center Operation Transpetro, Rio de Janeiro, (Brazil)

    2010-07-01

    TRANSPETRO needed real time computational tools to manage its commercial, logistics and operational activities more efficiently. TRANSPETRO's National Control Center Operation developed an information site that provides information in real time on the process plans involved in each operation, using a Plant Information Management System (PIMS). SCADA systems were introduced during 2009 and 2010. This paper reports on the global introduction of the site and its basic architecture. Every screen displays the overall data in real time on movement in volume in pipeline operated by TRANSPETRO. The products transported are tracked for each infrastructure and are shown on dynamic geographic maps. Applications have been developed to improve the quality of information available to customers. It was found that the development of this site using PIMS technology brought gains in support to decision-making at the strategic and tactical levels for TRANSPETRO.

  4. Pulsed rf operation analysis

    International Nuclear Information System (INIS)

    Puglisi, M.; Cornacchia, M.

    1981-01-01

    The need for a very low final amplifier output impedance, always associated with class A operation, requires a very large power waste in the final tube. The recently suggested pulsed rf operation, while saving a large amount of power, increases the inherent final amplifier non linearity. A method is presented for avoiding the large signal non linear analysis and it is shown how each component of the beam induced voltage depends upon all the beam harmonics via some coupling coefficients which are evaluated

  5. 30 CFR 773.9 - Review of applicant, operator, and ownership and control information.

    Science.gov (United States)

    2010-07-01

    ... operator's organizational structure and ownership or control relationships. (b) We must conduct the review... and control information. 773.9 Section 773.9 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION....9 Review of applicant, operator, and ownership and control information. (a) We, the regulatory...

  6. 75 FR 49943 - New Agency Information Collection Activity Under OMB Review: Pipeline System Operator Security...

    Science.gov (United States)

    2010-08-16

    ... INFORMATION CONTACT: Joanna Johnson, Office of Information Technology, TSA-11, Transportation Security... Collection Activity Under OMB Review: Pipeline System Operator Security Information AGENCY: Transportation... System Operator Security Information. Type of Request: New collection. OMB Control Number: Not yet...

  7. NATO Operational Record: Collective Analytical Exploitation to Inform Operational Analysis Models and Common Operational Planning Factors (Archives operationnelles de l’OTAN: Exploitation analytique collective visant a alimenter les modeles d’analyse operationnelle et les facteurs de planification operationnelle commune)

    Science.gov (United States)

    2014-05-01

    futures de l’OTAN est positivement influencée par l’analyse opérationnelle qui s’appuie sur les données quantitatives et qualitatives des dossiers des...operations is positively influenced by operational analysis that relies on quantitative and qualitative data of operational records from past and...and future NATO operations is positively influenced by operational analysis methods, models, and tools that rely on quantitative and qualitative data

  8. Work Domain Analysis of a Predecessor Sodium-cooled Reactor as Baseline for AdvSMR Operational Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Farris; David Gertman; Jacques Hugo

    2014-03-01

    This report presents the results of the Work Domain Analysis for the Experimental Breeder Reactor (EBR-II). This is part of the phase of the research designed to incorporate Cognitive Work Analysis in the development of a framework for the formalization of an Operational Concept (OpsCon) for Advanced Small Modular Reactors (AdvSMRs). For a new AdvSMR design, information obtained through Cognitive Work Analysis, combined with human performance criteria, can and should be used in during the operational phase of a plant to assess the crew performance aspects associated with identified AdvSMR operational concepts. The main objective of this phase was to develop an analytical and descriptive framework that will help systems and human factors engineers to understand the design and operational requirements of the emerging generation of small, advanced, multi-modular reactors. Using EBR-II as a predecessor to emerging sodium-cooled reactor designs required the application of a method suitable to the structured and systematic analysis of the plant to assist in identifying key features of the work associated with it and to clarify the operational and other constraints. The analysis included the identification and description of operating scenarios that were considered characteristic of this type of nuclear power plant. This is an invaluable aspect of Operational Concept development since it typically reveals aspects of future plant configurations that will have an impact on operations. These include, for example, the effect of core design, different coolants, reactor-to-power conversion unit ratios, modular plant layout, modular versus central control rooms, plant siting, and many more. Multi-modular plants in particular are expected to have a significant impact on overall OpsCon in general, and human performance in particular. To support unconventional modes of operation, the modern control room of a multi-module plant would typically require advanced HSIs that would

  9. Demand Analysis of Logistics Information Matching Platform: A Survey from Highway Freight Market in Zhejiang Province

    Science.gov (United States)

    Chen, Daqiang; Shen, Xiahong; Tong, Bing; Zhu, Xiaoxiao; Feng, Tao

    With the increasing competition in logistics industry and promotion of lower logistics costs requirements, the construction of logistics information matching platform for highway transportation plays an important role, and the accuracy of platform design is the key to successful operation or not. Based on survey results of logistics service providers, customers and regulation authorities to access to information and in-depth information demand analysis of logistics information matching platform for highway transportation in Zhejiang province, a survey analysis for framework of logistics information matching platform for highway transportation is provided.

  10. The role of information technology (IT) in reducing offshore operating costs

    International Nuclear Information System (INIS)

    Stern, M.J.

    1993-01-01

    The rapid changes in information technology (IT) and its application have helped to improve efficiency and reduce operating costs offshore. Developments in IT itself, in terms of technology, organization and standards together with cultural change have created new opportunities. In the application of IT, the most significant impact on operations costs and effectiveness has come from the use of information throughout the life cycle, and improved telecommunications. This paper describes recent developments in IT and its application, and cites examples where oil companies have derived major benefits

  11. Formal Concept Analysis and Information Retrieval – A Survey

    OpenAIRE

    Codocedo , Victor; Napoli , Amedeo

    2015-01-01

    International audience; One of the first models to be proposed as a document index for retrieval purposes was a lattice structure, decades before the introduction of Formal Concept Analysis. Nevertheless, the main notions that we consider so familiar within the community (" extension " , " intension " , " closure operators " , " order ") were already an important part of it. In the '90s, as FCA was starting to settle as an epistemic community, lattice-based Information Retrieval (IR) systems ...

  12. Urban poverty and informal motorcycle transport services in a Nigerian intermediate settlement: a synthesis of operative motives and satisfaction

    Directory of Open Access Journals (Sweden)

    Abubakar Zakariyya Al-Hasan

    2015-01-01

    Full Text Available The paper aims at examining operations motives and satisfaction in motorcycle taxi operators in Auchi. Primary data were sourced using structured questionnaires. Of the 148 questionnaires administered, 135 were found analysable. SPSS software version 17.0 was used for data analysis. The frequency distribution result of the demographic information of the respondents revealed that males, aged 21–30 year (58%, are predominantly involved in the operation. The education level of the majority of operators was in the secondary cohort (62.2%. Among operators, 56% operate motorcycle taxis for self-employment, whilst 34.1% was for augmenting income. A test of hypothesis result suggested that operator satisfaction based on the motive behind operation is statistically significant at 1%. The findings also strengthen previous studies. In terms of sustainability, informal motorcycle taxis are considered by the study to be unrealistic given the efficient transport system and enabling economic situation. Moreover, their operation impacts negatively on the environment, health, social and human capital development. Government and transport policy-makers should pursue efficient integrated modal transport system. Poverty alleviation machinery by government should explore viable initiatives that will engage the urban poor, especially youths, to divest their massive involvements in motorcycle taxi operation in Nigeria.

  13. Reducing the operational energy demand in buildings using building information modeling tools and sustainability approaches

    Directory of Open Access Journals (Sweden)

    Mojtaba Valinejad Shoubi

    2015-03-01

    Full Text Available A sustainable building is constructed of materials that could decrease environmental impacts, such as energy usage, during the lifecycle of the building. Building Information Modeling (BIM has been identified as an effective tool for building performance analysis virtually in the design stage. The main aims of this study were to assess various combinations of materials using BIM and identify alternative, sustainable solutions to reduce operational energy consumption. The amount of energy consumed by a double story bungalow house in Johor, Malaysia, and assessments of alternative material configurations to determine the best energy performance were evaluated by using Revit Architecture 2012 and Autodesk Ecotect Analysis software to show which of the materials helped in reducing the operational energy use of the building to the greatest extent throughout its annual life cycle. At the end, some alternative, sustainable designs in terms of energy savings have been suggested.

  14. Tank Farm Operations Surveillance Automation Analysis

    International Nuclear Information System (INIS)

    MARQUEZ, D.L.

    2000-01-01

    The Nuclear Operations Project Services identified the need to improve manual tank farm surveillance data collection, review, distribution and storage practices often referred to as Operator Rounds. This document provides the analysis in terms of feasibility to improve the manual data collection methods by using handheld computer units, barcode technology, a database for storage and acquisitions, associated software, and operational procedures to increase the efficiency of Operator Rounds associated with surveillance activities

  15. Task Analysis of Emergency Operating Procedures for Generating Quantitative HRA Data

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yochan; Park, Jinkyun; Kim, Seunghwan; Choi, Sun Yeong; Jung, Wondea; Jang, Inseok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    In this paper, the analysis results of the emergency task in the procedures (EOPs; emergency operating procedures) that can be observed from the simulator data are introduced. The task type, component type, system type, and additional information related with the performance of the operators were described. In addition, a prospective application of the analyzed information to HEP quantification process was discussed. In the probabilistic safety analysis (PSA) field, various human reliability analyses (HRAs) have been performed to produce estimates of human error probabilities (HEPs) for significant tasks in complex socio-technical systems. To this end, Many HRA methods have provided basic or nominal HEPs for typical tasks and the quantitative relations describing how a certain performance context or performance shaping factors (PSFs) affects the HEPs. In the HRA community, however, the necessity of appropriate and sufficient human performance data has been recently indicated. This is because a wide range of quantitative estimates in the previous HRA methods are not supported by solid empirical bases. Hence, there have been attempts to collect HRA supporting data. For example, KAERI has started to collect information on both unsafe acts of operators and the relevant PSFs. A characteristic of the database that is being developed at KAERI is that human errors and related PSF surrogates that can be objectively observable are collected from full-scope simulator experiences. In this environment, to produce concretely grounded bases of the HEPs, the traits or attributes of tasks where significant human errors can be observed should be definitely determined. The determined traits should be applicable to compare the HEPs on the traits with the data in previous HRA methods or databases. In this study, task characteristics in a Westinghouse type of EOPs were analyzed with the defining task, component, and system taxonomies.

  16. Human factors review of electric power dispatch control centers. Volume 3. Operator information needs summary. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, R.J.; Najaf-Zadeh, K.; Darlington, H.T.; McNair, H.D.; Seidenstein, S.; Williams, A.R.

    1982-10-01

    Human factors is a systems-oriented interdisciplinary specialty concerned with the design of systems, equipment, facilities and the operational environment. An important aspect leading to the design requirements is the determination of the information requirements for electric power dispatch control centers. There are significant differences between the system operator's actions during normal and degraded states of power system operation, and power system restoration. This project evaluated the information the operator requires for normal power system and control system operations and investigates the changes of information required by the operator as the power system and/or the control system degrades from a normal operating state. The Phase II study, published in two volumes, defines power system states and control system conditions to which operator information content can be related. This volume presents a summary of operator information needs, identifying the needs for and the uses of power system information by a system operator in conditions ranging from normal through degraded operation. Training requirements are also included for planning entry-level and follow-on training for operators.

  17. Operating Experience at NPP Krsko

    International Nuclear Information System (INIS)

    Kavsek, D.; Bach, B.

    1998-01-01

    Systematic analysis of operational experience by assessment of internal and industry events and the feedback of lessons learned is one of the essential activities in the improvement of the operational safety and reliability of the nuclear power plant. At NPP Krsko we have developed a document called ''Operating Experience Assessment Program''. Its purpose is to establish administrative guidance for the processing of operating events including on-site and industry events. Assessment of internal events is based on the following methods: Event and Causal Factor Charting, Change Analysis, Barrier Analysis, MORT (Management Oversight and Risk Tree Analysis) and Human Performance Evaluation. The operating experience group has developed a sophisticated program entitled ''Operating experience tracking system'' (OETS) in response to the need for a more efficient way of processing internal and industry operating experience information. The Operating Experience Tracking System is used to initiate and track operational events including recommended actions follow up. Six screens of the system contain diverse essential information which allows tracking of operational events and enables different kinds of browsing. OETS is a part of the NPP Krsko nuclear network system and can be easily accessed by all plant personnel. (author)

  18. Strategic and operational information watch newsletter nr 3

    International Nuclear Information System (INIS)

    2017-04-01

    This newsletter proposes an overview of events related to security and defence issues in relationship with impacts of climate change. A first part reports a strategic watch which addresses news about the Paris agreement (negotiation in Bonn, statement of the Canadian minister of Defence, commitment by the Lebanese army to reduce its emissions), about the energy sector (the lowest level of oil discovery, partial privatisation of Saudi Aramco, and economic and energetic diversification of Saudi Arabia), and climate change as a source of tensions and collaborations. The second part reports an operational information watch which addresses new technologies and renewable energies (photovoltaic cells operating in the dark, waste energetic valorisation in field operations, the issue of energy security for US military allowances, use of drones for logistics, a Gripen fighter aircraft flies with bio-fuel) and proposes a health watch (consequences of UV exposure in field operations, impact of El Nino on cholera distribution in Africa, the ban of ragweed in France). The newsletter finally indicates some brief news, events and recent publications

  19. Analysis on Isolation Condenser Operation by Fukushima Daiichi Unit 1 Operators

    International Nuclear Information System (INIS)

    Kim, Man Cheol

    2014-01-01

    Fukushima Daiichi nuclear accident resulted in the core damage in three reactors and the release of considerable amount of radioactive material to the environment, not to mention significant social impact and anti-nuclear atmosphere all around the world. This paper provides a review of the findings related to shift operators' operation of the isolation condenser in Unit 1 to examine shift operators' response to the situation. Based on the review of the findings, a situation assessment model was developed to analyze shift operators' understanding on whether core cooling was successfully performed in Unit 1 through the operation of isolation condenser. It was found that lack of information could be one of the main causes for the failure in core cooling by the IC in Unit 1. It is also recommended that the differences in the mathematical model for the situation assessment and that of the real operator need to be further investigated

  20. Analysis on Isolation Condenser Operation by Fukushima Daiichi Unit 1 Operators

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Man Cheol [Chungang University, Seoul (Korea, Republic of)

    2014-08-15

    Fukushima Daiichi nuclear accident resulted in the core damage in three reactors and the release of considerable amount of radioactive material to the environment, not to mention significant social impact and anti-nuclear atmosphere all around the world. This paper provides a review of the findings related to shift operators' operation of the isolation condenser in Unit 1 to examine shift operators' response to the situation. Based on the review of the findings, a situation assessment model was developed to analyze shift operators' understanding on whether core cooling was successfully performed in Unit 1 through the operation of isolation condenser. It was found that lack of information could be one of the main causes for the failure in core cooling by the IC in Unit 1. It is also recommended that the differences in the mathematical model for the situation assessment and that of the real operator need to be further investigated.

  1. Cassini Information Management System in Distributed Operations Collaboration and Cassini Science Planning

    Science.gov (United States)

    Equils, Douglas J.

    2008-01-01

    Launched on October 15, 1997, the Cassini-Huygens spacecraft began its ambitious journey to the Saturnian system with a complex suite of 12 scientific instruments, and another 6 instruments aboard the European Space Agencies Huygens Probe. Over the next 6 1/2 years, Cassini would continue its relatively simplistic cruise phase operations, flying past Venus, Earth, and Jupiter. However, following Saturn Orbit Insertion (SOI), Cassini would become involved in a complex series of tasks that required detailed resource management, distributed operations collaboration, and a data base for capturing science objectives. Collectively, these needs were met through a web-based software tool designed to help with the Cassini uplink process and ultimately used to generate more robust sequences for spacecraft operations. In 2001, in conjunction with the Southwest Research Institute (SwRI) and later Venustar Software and Engineering Inc., the Cassini Information Management System (CIMS) was released which enabled the Cassini spacecraft and science planning teams to perform complex information management and team collaboration between scientists and engineers in 17 countries. Originally tailored to help manage the science planning uplink process, CIMS has been actively evolving since its inception to meet the changing and growing needs of the Cassini uplink team and effectively reduce mission risk through a series of resource management validation algorithms. These algorithms have been implemented in the web-based software tool to identify potential sequence conflicts early in the science planning process. CIMS mitigates these sequence conflicts through identification of timing incongruities, pointing inconsistencies, flight rule violations, data volume issues, and by assisting in Deep Space Network (DSN) coverage analysis. In preparation for extended mission operations, CIMS has also evolved further to assist in the planning and coordination of the dual playback redundancy of

  2. A comprehensive operating room information system using the Kinect sensors and RFID.

    Science.gov (United States)

    Nouei, Mahyar Taghizadeh; Kamyad, Ali Vahidian; Soroush, Ahmad Reza; Ghazalbash, Somayeh

    2015-04-01

    Occasionally, surgeons do need various types of information to be available rapidly, efficiently and safely during surgical procedures. Meanwhile, they need to free up hands throughout the surgery to necessarily access the mouse to control any application in the sterility mode. In addition, they are required to record audio as well as video files, and enter and save some data. This is an attempt to develop a comprehensive operating room information system called "Medinav" to tackle all mentioned issues. An integrated and comprehensive operating room information system is introduced to be compatible with Health Level 7 (HL7) and digital imaging and communications in medicine (DICOM). DICOM is a standard for handling, storing, printing, and transmitting information in medical imaging. Besides, a natural user interface (NUI) is designed specifically for operating rooms where touch-less interactions with finger and hand tracking are in use. Further, the system could both record procedural data automatically, and view acquired information from multiple perspectives graphically. A prototype system is tested in a live operating room environment at an Iranian teaching hospital. There are also contextual interviews and usability satisfaction questionnaires conducted with the "MediNav" system to investigate how useful the proposed system could be. The results reveal that integration of these systems into a complete solution is the key to not only stream up data and workflow but maximize surgical team usefulness as well. It is now possible to comprehensively collect and visualize medical information, and access a management tool with a touch-less NUI in a rather quick, practical, and harmless manner.

  3. Agricultural information dissemination using ICTs: A review and analysis of information dissemination models in China

    Directory of Open Access Journals (Sweden)

    Yun Zhang

    2016-03-01

    Full Text Available Over the last three decades, China’s agriculture sector has been transformed from the traditional to modern practice through the effective deployment of Information and Communication Technologies (ICTs. Information processing and dissemination have played a critical role in this transformation process. Many studies in relation to agriculture information services have been conducted in China, but few of them have attempted to provide a comprehensive review and analysis of different information dissemination models and their applications. This paper aims to review and identify the ICT based information dissemination models in China and to share the knowledge and experience in applying emerging ICTs in disseminating agriculture information to farmers and farm communities to improve productivity and economic, social and environmental sustainability. The paper reviews and analyzes the development stages of China’s agricultural information dissemination systems and different mechanisms for agricultural information service development and operations. Seven ICT-based information dissemination models are identified and discussed. Success cases are presented. The findings provide a useful direction for researchers and practitioners in developing future ICT based information dissemination systems. It is hoped that this paper will also help other developing countries to learn from China’s experience and best practice in their endeavor of applying emerging ICTs in agriculture information dissemination and knowledge transfer.

  4. Current status and future plan of INSS's analysis of overseas trouble information

    International Nuclear Information System (INIS)

    Akazawa, Takashi; Okumoto, Masaru

    2017-01-01

    In order to enhance safety of nuclear power stations, it is important to analyze trouble information of both domestic and overseas to understand the causes, so as to prevent similar troubles which may be caused by the ones at our own nuclear power stations, by carrying out countermeasures beforehand. At Institute of Nuclear Safety System (INSS), we mainly collect and analyze overseas trouble information. So far, we have accumulated about 130,000 of such data, making analysis on about 4,000 of event reports every year, and presenting suggestions to PWR utilities from which we recognized needs of countermeasures in Japan. For example, we submitted 5 suggestions to PWR utilities last year. Moreover, we are learning about similar activities which are carried out by Institut de Radioprotection et de Sûreté Nucléaire (IRSN) in France to help us further improve our analyzing skills. As our plan for further improvement, we have started our effort to share knowledge and co-operate between PWR and BWR for deepening analysis. Our activity of Operating Experience (OE) analysis is to be consolidated in the fiscal year of 2019 under the structure of JANSI including BWR OE analysis, to effectively follow additional activities such as suggestions co-operating with JANSI's peer reviews. (author)

  5. Determining Bounds on Assumption Errors in Operational Analysis

    Directory of Open Access Journals (Sweden)

    Neal M. Bengtson

    2014-01-01

    Full Text Available The technique of operational analysis (OA is used in the study of systems performance, mainly for estimating mean values of various measures of interest, such as, number of jobs at a device and response times. The basic principles of operational analysis allow errors in assumptions to be quantified over a time period. The assumptions which are used to derive the operational analysis relationships are studied. Using Karush-Kuhn-Tucker (KKT conditions bounds on error measures of these OA relationships are found. Examples of these bounds are used for representative performance measures to show limits on the difference between true performance values and those estimated by operational analysis relationships. A technique for finding tolerance limits on the bounds is demonstrated with a simulation example.

  6. 17 CFR 39.5 - Information relating to derivatives clearing organization operations.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Information relating to derivatives clearing organization operations. 39.5 Section 39.5 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION DERIVATIVES CLEARING ORGANIZATIONS § 39.5 Information relating to derivatives...

  7. The nuclear industry's transition to risk-informed regulation and operation in the United States

    International Nuclear Information System (INIS)

    Kadak, Andrew C.; Matsuo, Toshihiro

    2007-01-01

    This paper summarizes a study of the transition of the United States nuclear industry from a prescriptive regulatory structure to a more risk informed approach to operations and regulations. The transition occurred over a 20 yr period in which gradual changes were made in the fundamental regulations and to the approach to nuclear safety and operations. While the number of actual regulatory changes were few, they are continuing. The utilities that embraced risk informed operations made dramatic changes in the way they approached operations and outage management. Those utilities that used risk in operations showed dramatic improvement in safety based on Institute of Nuclear Power Operations (INPO) performance indicators. It was also shown that the use of risk did not negatively affect safety performance of the plants compared to standard prescriptive approaches. This was despite having greater flexibility in compliance to regulatory standards and the use of the newly instituted risk-informed reactor oversight process. Key factors affecting the successful transition to a more risk-informed approach to regulations and operations are: strong top management support and leadership both at the regulator and the utility; education and training in risk principles and probabilistic risk Assessment tools for engineers, operators and maintenance staff; a slow and steady introduction of risk initiatives in areas that can show value to both the regulator and the industry; a transparent regulatory foundation built around a safety goal policy and the development of a strong safety culture at the utility to allow for more independence in safety compliance and risk management. The experience of the United States shows positive results in both safety and economics. The INPO and NRC metrics presented show that the use of risk information in operations and regulation is marginally better with no degradation in safety when plants that have embraced risk-informed approaches are compared

  8. Navigation and Alignment Aids Concept of Operations and Supplemental Design Information. Revision A

    Science.gov (United States)

    Kelly, Sean M.; Cryan, Scott P.

    2016-01-01

    The IDSS Navigation and Alignment Aids Concept of Operations and Supplemental Design Information document provides supplemental information to the IDSS IDD. The guide provides insight into the navigation and alignment aids design, and how those aids can be utilized by incoming vehicles for proximity operations and docking. The navigation aids are paramount to successful docking.

  9. Evaluating the influence of perceived organizational learning capability on user acceptance of information technology among operating room nurse staff.

    Science.gov (United States)

    Lee, Chien-Ching; Lin, Shih-Pin; Yang, Shu-Ling; Tsou, Mei-Yung; Chang, Kuang-Yi

    2013-03-01

    Medical institutions are eager to introduce new information technology to improve patient safety and clinical efficiency. However, the acceptance of new information technology by medical personnel plays a key role in its adoption and application. This study aims to investigate whether perceived organizational learning capability (OLC) is associated with user acceptance of information technology among operating room nurse staff. Nurse anesthetists and operating room nurses were recruited in this questionnaire survey. A pilot study was performed to ensure the reliability and validity of the translated questionnaire, which consisted of 14 items from the four dimensions of OLC, and 16 items from the four constructs of user acceptance of information technology, including performance expectancy, effort expectancy, social influence, and behavioral intention. Confirmatory factor analysis was applied in the main survey to evaluate the construct validity of the questionnaire. Structural equation modeling was used to test the hypothetical relationships between the four dimensions of user acceptance of information technology and the second-ordered OLC. Goodness of fit of the hypothetic model was also assessed. Performance expectancy, effort expectancy, and social influence positively influenced behavioral intention of users of the clinical information system (all p < 0.001) and accounted for 75% of its variation. The second-ordered OLC was positively associated with performance expectancy, effort expectancy, and social influence (all p < 0.001). However, the hypothetic relationship between perceived OLC and behavioral intention was not significant (p = 0.87). The fit statistical analysis indicated reasonable model fit to data (root mean square error of approximation = 0.07 and comparative fit index = 0.91). Perceived OLC indirectly affects user behavioral intention through the mediation of performance expectancy, effort expectancy, and social influence in the operating room

  10. Accident sequence analysis for a BWR [Boiling Water Reactor] during low power and shutdown operations

    International Nuclear Information System (INIS)

    Whitehead, D.W.; Hake, T.M.

    1990-01-01

    Most previous Probabilistic Risk Assessments have excluded consideration of accidents initiated in low power and shutdown modes of operation. A study of the risk associated with operation in low power and shutdown is being performed at Sandia National Laboratories for a US Boiling Water Reactor (BWR). This paper describes the proposed methodology for the analysis of the risk associated with the operation of a BWR during low power and shutdown modes and presents preliminary information resulting from the application of the methodology. 2 refs., 2 tabs

  11. Cognitive task analysis and the design of computerized operator aids

    International Nuclear Information System (INIS)

    Andersson, H.

    1985-01-01

    The new technological possibilities have led to the initiation of many projects for the design and evaluation of computerized operator support systems to be implemented in nuclear power plant control rooms. A typical finding so far has been that operators often have a positive attitude towards such systems but still don't use them very much, mostly because they find almost the same information on the conventional control boards which they are accustomed to use. Still, however, there is a widely shared belief that conventional control rooms have short-comings that make the use of computerized aids necessary. One reason for the limited success so far is that the new systems often are poorly integrated with the existing conventional instrumentation and with the working procedures. The reluctance to use new computer based aids, despite their nice features, is therefore probably caused by an inadequate task analysis made prior to the design of these computerized operator support systems

  12. The incremental information content of earnings, working capital from operations, and cash flows

    Directory of Open Access Journals (Sweden)

    Simin Banifatemi Kashi

    2015-09-01

    Full Text Available This paper presents an empirical study to determine the effects of different factors including present profit, depreciation, working capital, operating cash flow and other accruals on future earnings stability. The study selects the information of 124 selected firms from Tehran Stock Exchange over the period 2006-2012. Using two regression analysis, the study has determined that as the fluctuation of profit increases, the profitability increases too. In addition, the study has concluded that firms with minimum fluctuations preserve more stable profitability. Moreover, firms with higher fluctuation in profitability maintain more volatile profitability for the next consecutive period.

  13. Cognitive task analysis of nuclear power plant operators for man-machine interface design

    International Nuclear Information System (INIS)

    Itoh, J.I.; Yoshimura, S.; Ohtsuka, T.

    1990-01-01

    This paper aims to ascertain and further develop design guidelines for a man-machine interface compatible with plant operators' problem solving strategies. As the framework for this study, operator's information processing activities were modeled, based on J. Rasmussen's framework for cognitive task analysis. Two experiments were carried out. One was an experiment aimed at gaining an understanding of internal mechanisms involved in mistakes and slips which occurred in operators' responses to incidents and accidents. As a result of fifteen cases of operator performance analysis, sixty one human errors were identified. Further analysis of the errors showed that frequently occurring error mechanisms were absent-mindedness, lack of recognition of patterns in diagnosis and failed procedure formulation due to memory lapses. The other kind of experiment was carried out to identify the envelope of trajectories for the operator's search in the problem space consisting of the two dimensions of means-ends and whole-part relations while dealing with transients. Two cases of experimental sessions were conducted with the thinking-aloud method. From analyses based on verbal protocols, trajectories of operator's search were derived, covering from the whole plant level through the component level in the whole-part dimension and covering from the functional purpose level through the physical form level in the means-ends dimension. The findings obtained from these analyses serve as a basis for developing design guidelines for man-machine interfaces in control rooms of nuclear power plants

  14. Human reliability analysis of control room operators

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Isaac J.A.L.; Carvalho, Paulo Victor R.; Grecco, Claudio H.S. [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil)

    2005-07-01

    Human reliability is the probability that a person correctly performs some system required action in a required time period and performs no extraneous action that can degrade the system Human reliability analysis (HRA) is the analysis, prediction and evaluation of work-oriented human performance using some indices as human error likelihood and probability of task accomplishment. Significant progress has been made in the HRA field during the last years, mainly in nuclear area. Some first-generation HRA methods were developed, as THERP (Technique for human error rate prediction). Now, an array of called second-generation methods are emerging as alternatives, for instance ATHEANA (A Technique for human event analysis). The ergonomics approach has as tool the ergonomic work analysis. It focus on the study of operator's activities in physical and mental form, considering at the same time the observed characteristics of operator and the elements of the work environment as they are presented to and perceived by the operators. The aim of this paper is to propose a methodology to analyze the human reliability of the operators of industrial plant control room, using a framework that includes the approach used by ATHEANA, THERP and the work ergonomics analysis. (author)

  15. Performance of nuclear power plants and analysis of some factors affecting their operational reliability and economy

    International Nuclear Information System (INIS)

    Kozak, M.; Havel, S.

    1989-09-01

    In Czechoslovakia, there are eight WWER 440 type reactors in operation at present. Since their introduction into operation, nuclear power plants in Czechoslovakia have exhibited high reliability. In the paper, total parameters of reliability with an analysis of causes affecting negatively their annual utilization are presented. Existence of a computerized information system for acquisition, recording and evaluation of reliability-significant data from operation and its feedback to designers and manufacturers of nuclear power plant equipment and components is a basic requirement of a systematic assurance of the needed level of nuclear power plant reliability. The information system is used simultaneously also for realistic evaluation of aging of equipment and systems. Analysis of the state of equipment is important mainly in the final stage of the NPP during consideration of further extension of its service life. Environmental effects of the Czechoslovak NPPs are very low (favourable). It follows from comparison of annual dose equivalents of the Czechoslovak NPPs operational personnel with the foreign NPPs that the values recorded in Czechoslovakia belong to the lowest ones. In conclusion, some ways of assurance of operational safety and reliability of the Czechoslovak nuclear power plants including the role of the State regulatory body are briefly discussed. (author). 3 tabs

  16. Safety analysis -- 200 Area Savannah River Plant, F-Canyon Operations. Supplement 4

    Energy Technology Data Exchange (ETDEWEB)

    Beary, M.M.; Collier, C.D.; Fairobent, L.A.; Graham, R.F.; Mason, C.L.; McDuffee, W.T.; Owen, T.L.; Walker, D.H.

    1986-02-01

    The F-Canyon facility is located in the 200 Separations Area and uses the Purex process to recover plutonium from reactor-irradiated uranium. The irradiated uranium is normally in the form of solid or hollow cylinders called slugs. These slugs are encased in aluminum cladding and are sent to the F-Canyon from the Savannah River Plant (SRP) reactor areas or from the Receiving Basin for Offsite Fuels (RBOF). This Safety Analysis Report (SAR) documents an analysis of the F-Canyon operations and is an update to a section of a previous SAR. The previous SAR documented an analysis of the entire 200 Separations Area operations. This SAR documents an analysis of the F-Canyon and is one of a series of documents for the Separations Area as specified in the Savannah River Implementation Plans. A substantial amount of the information supporting the conclusions of this SAR is found in the Systems Analysis. Some F-Canyon equipment has been updated during the time between the Systems Analysis and this SAR and a complete description of this equipment is included in this report. The primary purpose of the analysis was to demonstrate that the F-Canyon can be operated without undue risk to onsite or offsite populations and to the environment. In this report, risk is defined as the expected frequency of an accident, multiplied by the resulting radiological consequence in person-rem. The units of risk for radiological dose are person-rem/year. Maximum individual exposure values have also been calculated and reported.

  17. Identification of the operating crew's information needs for accident management

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, W.R.; Hanson, D.J.; Ward, L.W.; Solberg, D.E.

    1988-01-01

    While it would be very difficult to predetermine all of the actions required to mitigate the consequences of every potential severe accident for a nuclear power plant, development of additional guidance and training could improve the likelihood that the operating crew would implement effective sever-accident management measures. The US Nuclear Regulatory Commission (NRC) is conducting an Accident Management Research Program that emphasizes the application of severe-accident research results to enhance the capability of the plant operating crew to effectively manage severe accidents. One element of this program includes identification of the information needed by the operating crew in severe-accident situations. This paper discusses a method developed for identifying these information needs and its application. The methodology has been applied to a generic reactor design representing a PWR with a large dry containment. The information needs were identified by systematically determining what information is needed to assess the health of the critical functions, identify the presence of challenges, select strategies, and assess the effectiveness of these strategies. This method allows the systematic identification of information needs for a broad range of severe-accident scenarios and can be validated by exercising the functional models for any specific event sequence.

  18. Time Based Workload Analysis Method for Safety-Related Operator Actions in Safety Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yun Goo; Oh, Eung Se [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

    2016-05-15

    During the design basis event, the safety system performs safety functions to mitigate the event. The most of safety system is actuated by automatic system however, there are operator manual actions that are needed for the plant safety. These operator actions are classified as important human actions in human factors engineering design. The human factors engineering analysis and evaluation is needed for these important human actions to assure that operator successfully perform their tasks for plant safety and operational goals. The work load analysis is one of the required analysis for the important human actions.

  19. Time Based Workload Analysis Method for Safety-Related Operator Actions in Safety Analysis

    International Nuclear Information System (INIS)

    Kim, Yun Goo; Oh, Eung Se

    2016-01-01

    During the design basis event, the safety system performs safety functions to mitigate the event. The most of safety system is actuated by automatic system however, there are operator manual actions that are needed for the plant safety. These operator actions are classified as important human actions in human factors engineering design. The human factors engineering analysis and evaluation is needed for these important human actions to assure that operator successfully perform their tasks for plant safety and operational goals. The work load analysis is one of the required analysis for the important human actions.

  20. Information Flow Analysis for VHDL

    DEFF Research Database (Denmark)

    Tolstrup, Terkel Kristian; Nielson, Flemming; Nielson, Hanne Riis

    2005-01-01

    We describe a fragment of the hardware description language VHDL that is suitable for implementing the Advanced Encryption Standard algorithm. We then define an Information Flow analysis as required by the international standard Common Criteria. The goal of the analysis is to identify the entire...... information flow through the VHDL program. The result of the analysis is presented as a non-transitive directed graph that connects those nodes (representing either variables or signals) where an information flow might occur. We compare our approach to that of Kemmerer and conclude that our approach yields...

  1. Error analysis of nuclear power plant operator cognitive behavior

    International Nuclear Information System (INIS)

    He Xuhong; Zhao Bingquan; Chen Yulong

    2001-01-01

    Nuclear power plant is a complex human-machine system integrated with many advanced machines, electron devices and automatic controls. It demands operators to have high cognitive ability and correct analysis skill. The author divides operator's cognitive process into five stages to analysis. With this cognitive model, operator's cognitive error is analysed to get the root causes and stages that error happens. The results of the analysis serve as a basis in design of control rooms and training and evaluation of operators

  2. 17 CFR 229.303 - (Item 303) Management's discussion and analysis of financial condition and results of operations.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false (Item 303) Management's discussion and analysis of financial condition and results of operations. 229.303 Section 229.303 Commodity... 1975-REGULATION S-K Financial Information § 229.303 (Item 303) Management's discussion and analysis of...

  3. Multi-fields' coordination information integrated platform for nuclear power plant operation preparation

    International Nuclear Information System (INIS)

    Yuan Chang; Li Yong; Ye Zhiqiang

    2011-01-01

    To realize the coordination in multi-fields' work and information sharing, by applying the method of Enterprise Architecture (EA), the business architecture, functional flow and application architecture of Nuclear Power Plant's operation preparation information integrated platform are designed, which can realize the information sharing and coordination of multi fields. (authors)

  4. U.S. Military Information Operations in Afghanistan: Effectiveness of Psychological Operations 2001-2010

    Science.gov (United States)

    2012-01-01

    cultural norms and sensibilities. To highlight the un-Islamic ideology and behavior of the terrorists, 4 Christopher N. Koontz , Enduring Voices: Oral...maintaining law and order at the local 57 Koontz , 2008, p. 363. 84 U.S. Military Information Operations in Afghanistan level, this presents a serious...theme. However, although 61 Koontz , 2008, p. 141. 62 Koontz , 2008, p. 141. 63 Joshua Partlow and Scott Wilson, “Karzai Rails Against Foreign Presence

  5. Automated transmission system operation and management : meeting stakeholder information needs

    Energy Technology Data Exchange (ETDEWEB)

    Peelo, D.F.; Toom, P.O. [British Columbia Hydro, Vancouver, BC (Canada)

    1998-12-01

    Information monitoring is considered to be the fundamental basis for moving beyond substation automation and into automated transmission system operation and management. Information monitoring was defined as the acquisition of data and processing the data into decision making. Advances in digital technology and cheaper, more powerful computing capability has made it possible to capture all transmission stakeholder needs in a shared and automated operation and management system. Recognizing that the key to success in the development of transmission systems is automation, BC Hydro has initiated a long-term research and development project to develop the structure and detail of transmission system automation. The involvement of partners, be they utility or equipment suppliers, is essential in order to deal with protocol and similar issues. 3 refs., 1 tab., 3 figs.

  6. A Validated Task Analysis of the Single Pilot Operations Concept

    Science.gov (United States)

    Wolter, Cynthia A.; Gore, Brian F.

    2015-01-01

    The current day flight deck operational environment consists of a two-person Captain/First Officer crew. A concept of operations (ConOps) to reduce the commercial cockpit to a single pilot from the current two pilot crew is termed Single Pilot Operations (SPO). This concept has been under study by researchers in the Flight Deck Display Research Laboratory (FDDRL) at the National Aeronautics and Space Administration's (NASA) Ames (Johnson, Comerford, Lachter, Battiste, Feary, and Mogford, 2012) and researchers from Langley Research Centers (Schutte et al., 2007). Transitioning from a two pilot crew to a single pilot crew will undoubtedly require changes in operational procedures, crew coordination, use of automation, and in how the roles and responsibilities of the flight deck and ATC are conceptualized in order to maintain the high levels of safety expected of the US National Airspace System. These modifications will affect the roles and the subsequent tasks that are required of the various operators in the NextGen environment. The current report outlines the process taken to identify and document the tasks required by the crew according to a number of operational scenarios studied by the FDDRL between the years 2012-2014. A baseline task decomposition has been refined to represent the tasks consistent with a new set of entities, tasks, roles, and responsibilities being explored by the FDDRL as the move is made towards SPO. Information from Subject Matter Expert interviews, participation in FDDRL experimental design meetings, and study observation was used to populate and refine task sets that were developed as part of the SPO task analyses. The task analysis is based upon the proposed ConOps for the third FDDRL SPO study. This experiment possessed nine different entities operating in six scenarios using a variety of SPO-related automation and procedural activities required to guide safe and efficient aircraft operations. The task analysis presents the roles and

  7. AUDIT DISCLOSURE OF MATERIAL INFORMATION ON OPERATING SEGMENTS THE ACTIVITIES OF THE ORGANIZATIONS OF TOURIST SPHERE

    Directory of Open Access Journals (Sweden)

    Екатерина Николаевна Скорикова

    2013-04-01

    Full Text Available In modern conditions market economy for take decisions of use services tourist organizations, users not enough relevant information of financial result activities.The article considered audit disclosure relevant information on operating segments activities, for example tourist organizations.In result research considered operating segments on current and discontinued activities, and their impact on disclosure relevant information of financial result.Proposed option disclosure relevant information on operating segments activities in explanatory Note to the annual financial statements.Received results prove, that information on operating segments activities essential in all aspects.Results research has as theoretical so and practical significance, and can used at further development theoretical and practical questions on disclosure relevant information of activities organizations of tourist sphere.DOI: http://dx.doi.org/10.12731/2218-7405-2013-1-2

  8. Condition Monitoring Of Operating Pipelines With Operational Modal Analysis Application

    OpenAIRE

    Mironov Aleksey; Doronkin Pavel; Priklonsky Aleksander; Kabashkin Igor

    2015-01-01

    In the petroleum, natural gas and petrochemical industries, great attention is being paid to safety, reliability and maintainability of equipment. There are a number of technologies to monitor, control, and maintain gas, oil, water, and sewer pipelines. The paper focuses on operational modal analysis (OMA) application for condition monitoring of operating pipelines. Special focus is on the topicality of OMA for definition of the dynamic features of the pipeline (frequencies and mode shapes) i...

  9. Safety margins of operating reactors. Analysis of uncertainties and implications for decision making

    International Nuclear Information System (INIS)

    2003-01-01

    Maintaining safety in the design and operation of nuclear power plants (NPPs) is a very important task under the conditions of a challenging environment, affected by the deregulated electricity market and implementation of risk informed regulations. In Member States, advanced computer codes are widely used as safety analysis tools in the framework of licensing of new NPP projects, safety upgrading programmes of existing NPPs, periodic safety reviews, renewal of operating licences, use of the safety margins for reactor power uprating, better utilization of nuclear fuel and higher operational flexibility, for justification of lifetime extensions, development of new emergency operating procedures, analysis of operational events, and development of accident management programmes. The issue of inadequate quality of safety analysis is becoming important due to a general tendency to use advanced tools for better establishment and utilization of safety margins, while the existence of such margins assure that NPPs operate safely in all modes of operation and at all times. The most important safety margins relate to physical barriers against release of radioactive material, such as fuel matrix and fuel cladding, reactor coolant system boundary, and the containment. Typically, safety margins are determined with use of computational tools for safety analysis. Advanced best estimate computer codes are suggested e.g. in the IAEA Safety Guide on Safety Assessment and Verification for Nuclear Power Plants to be used for current safety analysis. Such computer codes require their careful application to avoid unjustified reduction in robustness of the reactor safety. The issue of uncertainties in safety analyses and their impact on evaluation of safety margins is addressed in a number of IAEA guidance documents, in particular in the Safety Report on Accident Analysis for Nuclear Power Plants. It is also discussed in various technical meetings and workshops devoted to this area. The

  10. Inform: Efficient Information-Theoretic Analysis of Collective Behaviors

    Directory of Open Access Journals (Sweden)

    Douglas G. Moore

    2018-06-01

    Full Text Available The study of collective behavior has traditionally relied on a variety of different methodological tools ranging from more theoretical methods such as population or game-theoretic models to empirical ones like Monte Carlo or multi-agent simulations. An approach that is increasingly being explored is the use of information theory as a methodological framework to study the flow of information and the statistical properties of collectives of interacting agents. While a few general purpose toolkits exist, most of the existing software for information theoretic analysis of collective systems is limited in scope. We introduce Inform, an open-source framework for efficient information theoretic analysis that exploits the computational power of a C library while simplifying its use through a variety of wrappers for common higher-level scripting languages. We focus on two such wrappers here: PyInform (Python and rinform (R. Inform and its wrappers are cross-platform and general-purpose. They include classical information-theoretic measures, measures of information dynamics and information-based methods to study the statistical behavior of collective systems, and expose a lower-level API that allow users to construct measures of their own. We describe the architecture of the Inform framework, study its computational efficiency and use it to analyze three different case studies of collective behavior: biochemical information storage in regenerating planaria, nest-site selection in the ant Temnothorax rugatulus, and collective decision making in multi-agent simulations.

  11. Analysis and Evaluation of Operational Data 1991 annual report: Power reactors

    International Nuclear Information System (INIS)

    1992-07-01

    The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) describes activities performed during 1991. The report is published in two separate parts. This document, NUREG-1272, Vol. 6, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. NUREG-1272, Vol. 6, No. 2, covers nonreactors and presents a review of the events and concerns during 1991 associated with the use of licensed material in nonreactor applications. Each volume contains a list of the AEOD reports issued for 1984 through 1991

  12. Information Technology In Supply Chain Operations: A Road Map ...

    African Journals Online (AJOL)

    A five phase model and seven-step practical plan are proposed after careful evaluation of critical success factors, the role of IT in SCM and the overall benefits which can result in successful application of IT to SC operations. The paper concludes by stressing that connecting numerous information systems and integrating ...

  13. ANALYSIS AND OPERATING LEVERAGE RELATIONSHIP WITH THE OPERATIONAL RISK CUBAN ENTERPRISES

    Directory of Open Access Journals (Sweden)

    María E. González-del Foyo

    2016-01-01

    Full Text Available The analysis of the equilibrium point is important in the planning process, because the relation costvolume-benefit may become significantly influenced by the investment of the company in fixed assets, and the changes in the ratio of fixed assets in relation to variable assets are determined at the moment, that the finantial plans are established. Together with the analysis of the equilibrium point, the degree of leverage is calculated and interpreted and its implicatiosn for the operative risk of an company is studied. The study of the degree of leverage and its interpretation from the operative risk point of view to which an company thats operate in different conditions and economies is faced, with is the basic objetive of the present paper and is of the highest importance for the decision taking of the management, being this a phenomenon present in all economic organizations. 

  14. Storing and managing information artifacts collected by information analysts using a computing device

    Science.gov (United States)

    Pike, William A; Riensche, Roderick M; Best, Daniel M; Roberts, Ian E; Whyatt, Marie V; Hart, Michelle L; Carr, Norman J; Thomas, James J

    2012-09-18

    Systems and computer-implemented processes for storage and management of information artifacts collected by information analysts using a computing device. The processes and systems can capture a sequence of interactive operation elements that are performed by the information analyst, who is collecting an information artifact from at least one of the plurality of software applications. The information artifact can then be stored together with the interactive operation elements as a snippet on a memory device, which is operably connected to the processor. The snippet comprises a view from an analysis application, data contained in the view, and the sequence of interactive operation elements stored as a provenance representation comprising operation element class, timestamp, and data object attributes for each interactive operation element in the sequence.

  15. 47 CFR 25.263 - Information sharing requirements for SDARS terrestrial repeater operators.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Information sharing requirements for SDARS terrestrial repeater operators. 25.263 Section 25.263 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Technical Standards § 25.263 Information sharing...

  16. Evaluating fuzzy operators of an object-based image analysis for detecting landslides and their changes

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Blaschke, Thomas; Tiede, Dirk; Moghaddam, Mohammad Hossein Rezaei

    2017-09-01

    This article presents a method of object-based image analysis (OBIA) for landslide delineation and landslide-related change detection from multi-temporal satellite images. It uses both spatial and spectral information on landslides, through spectral analysis, shape analysis, textural measurements using a gray-level co-occurrence matrix (GLCM), and fuzzy logic membership functionality. Following an initial segmentation step, particular combinations of various information layers were investigated to generate objects. This was achieved by applying multi-resolution segmentation to IRS-1D, SPOT-5, and ALOS satellite imagery in sequential steps of feature selection and object classification, and using slope and flow direction derivatives from a digital elevation model together with topographically-oriented gray level co-occurrence matrices. Fuzzy membership values were calculated for 11 different membership functions using 20 landslide objects from a landslide training data. Six fuzzy operators were used for the final classification and the accuracies of the resulting landslide maps were compared. A Fuzzy Synthetic Evaluation (FSE) approach was adapted for validation of the results and for an accuracy assessment using the landslide inventory database. The FSE approach revealed that the AND operator performed best with an accuracy of 93.87% for 2005 and 94.74% for 2011, closely followed by the MEAN Arithmetic operator, while the OR and AND (*) operators yielded relatively low accuracies. An object-based change detection was then applied to monitor landslide-related changes that occurred in northern Iran between 2005 and 2011. Knowledge rules to detect possible landslide-related changes were developed by evaluating all possible landslide-related objects for both time steps.

  17. OpenCV-Based Nanomanipulation Information Extraction and the Probe Operation in SEM

    Directory of Open Access Journals (Sweden)

    Dongjie Li

    2015-02-01

    Full Text Available Aimed at the established telenanomanipulation system, the method of extracting location information and the strategies of probe operation were studied in this paper. First, the machine learning algorithm of OpenCV was used to extract location information from SEM images. Thus nanowires and probe in SEM images can be automatically tracked and the region of interest (ROI can be marked quickly. Then the location of nanowire and probe can be extracted from the ROI. To study the probe operation strategy, the Van der Waals force between probe and a nanowire was computed; thus relevant operating parameters can be obtained. With these operating parameters, the nanowire in 3D virtual environment can be preoperated and an optimal path of the probe can be obtained. The actual probe runs automatically under the telenanomanipulation system's control. Finally, experiments were carried out to verify the above methods, and results show the designed methods have achieved the expected effect.

  18. Canonical analysis based on mutual information

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg; Vestergaard, Jacob Schack

    2015-01-01

    combinations with the information theoretical measure mutual information (MI). We term this type of analysis canonical information analysis (CIA). MI allows for the actual joint distribution of the variables involved and not just second order statistics. While CCA is ideal for Gaussian data, CIA facilitates...

  19. [Design and Implementation of a Mobile Operating Room Information Management System Based on Electronic Medical Record].

    Science.gov (United States)

    Liu, Baozhen; Liu, Zhiguo; Wang, Xianwen

    2015-06-01

    A mobile operating room information management system with electronic medical record (EMR) is designed to improve work efficiency and to enhance the patient information sharing. In the operating room, this system acquires the information from various medical devices through the Client/Server (C/S) pattern, and automatically generates XML-based EMR. Outside the operating room, this system provides information access service by using the Browser/Server (B/S) pattern. Software test shows that this system can correctly collect medical information from equipment and clearly display the real-time waveform. By achieving surgery records with higher quality and sharing the information among mobile medical units, this system can effectively reduce doctors' workload and promote the information construction of the field hospital.

  20. Application of information technology in the process analysis of structural subdivisions of light industry enterprises

    Directory of Open Access Journals (Sweden)

    Тарана Тахир кызы Мусаева

    2016-02-01

    Full Text Available The problems of application of information technologies in the process analysis of structural subdivisions of the enterprises of light industry enterprises are considered. For the functional cost analysis in the company it was prepared a computerized structure of the workplace and its principle of operation is described. The functionality of the computerized workplace is tested for textile enterprises. The results showed that the use of information technology has good prospects at the implementation of the quality management system at the textile enterprises

  1. SDI-based business processes: A territorial analysis web information system in Spain

    Science.gov (United States)

    Béjar, Rubén; Latre, Miguel Á.; Lopez-Pellicer, Francisco J.; Nogueras-Iso, Javier; Zarazaga-Soria, F. J.; Muro-Medrano, Pedro R.

    2012-09-01

    Spatial Data Infrastructures (SDIs) provide access to geospatial data and operations through interoperable Web services. These data and operations can be chained to set up specialized geospatial business processes, and these processes can give support to different applications. End users can benefit from these applications, while experts can integrate the Web services in their own business processes and developments. This paper presents an SDI-based territorial analysis Web information system for Spain, which gives access to land cover, topography and elevation data, as well as to a number of interoperable geospatial operations by means of a Web Processing Service (WPS). Several examples illustrate how different territorial analysis business processes are supported. The system has been established by the Spanish National SDI (Infraestructura de Datos Espaciales de España, IDEE) both as an experimental platform for geoscientists and geoinformation system developers, and as a mechanism to contribute to the Spanish citizens knowledge about their territory.

  2. A guidebook for the operation and maintenance of HANARO seismic monitoring analysis system

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Jeong Soo; Yoon, Doo Byung; Kim, Hyung Kyoo

    2003-09-01

    Systems and structures related to HANARO safety are classified as seismic category I. Since 1995, the seismic monitoring system has been utilized for monitoring an earthquake at the HANARO site. The existing seismic monitoring system consists of field sensors and monitoring panel. The analog-type monitoring system with magnetic tape recorder is out-of-date model. In addition, the disadvantage of the existing system is that it does not include signal-analyzing equipment. Therefore, we have improved the analog seismic monitoring system into a new digital Seismic Monitoring Analysis System(SMAS) that can offer precise and detail information of the earthquake signals. This newly developed SMAS is operating at the HANARO instrument room to acquire and analyze the signal of an earthquake. This document is a guidebook for the operation and maintenance of the SMAS. The first chapter gives an outline of the SMAS. The second chapter describes functional capability and specification of the hardware. Chapters 3 and 4 describe starting procedure of the SMAS and how to operate the seismic monitoring program, respectively. Chapter 5 illustrates the seismic analysis algorithm used in the SMAS. The way of operating the seismic analysis program is described in chapter 6. Chapter 7 illustrates the calibration procedure for data acquisition module. Chapter 8 describes the symptoms of common malfunctions and its countermeasure suited to the occasions.

  3. Secure Retrieval of FFTF Testing, Design, and Operating Information

    International Nuclear Information System (INIS)

    Butner, R. Scott; Wootan, David W.; Omberg, Ronald P.; Makenas, Bruce J.; Nielsen, Deborah

    2009-01-01

    One of the goals of the Advanced Fuel Cycle Initiative (AFCI) is to preserve the knowledge that has been gained in the United States on Liquid Metal Reactors (LMR). In addition, preserving LMR information and knowledge is part of a larger international collaborative activity conducted under the auspices of the International Atomic Energy Agency (IAEA). A similar program is being conducted for EBR-II at the Idaho Nuclear Laboratory (INL) and international programs are also in progress. Knowledge preservation at the FFTF is focused on the areas of design, construction, startup, and operation of the reactor. As the primary function of the FFTF was testing, the focus is also on preserving information obtained from irradiation testing of fuels and materials. This information will be invaluable when, at a later date, international decisions are made to pursue new LMRs. In the interim, this information may be of potential use for international exchanges with other LMR programs around the world. At least as important in the United States, which is emphasizing large-scale computer simulation and modeling, this information provides the basis for creating benchmarks for validating and testing these large scale computer programs. Although the preservation activity with respect to FFTF information as discussed below is still underway, the team of authors above is currently retrieving and providing experimental and design information to the LMR modeling and simulation efforts for use in validating their computer models. On the Hanford Site, the FFTF reactor plant is one of the facilities intended for decontamination and decommissioning consistent with the cleanup mission on this site. The reactor facility has been deactivated and is being maintained in a cold and dark minimal surveillance and maintenance mode until final decommissioning is pursued. In order to ensure protection of information at risk, the program to date has focused on sequestering and secure retrieval

  4. Construction site Voice Operated Information System (VOIS) test

    Science.gov (United States)

    Lawrence, Debbie J.; Hettchen, William

    1991-01-01

    The Voice Activated Information System (VAIS), developed by USACERL, allows inspectors to verbally log on-site inspection reports on a hand held tape recorder. The tape is later processed by the VAIS, which enters the information into the system's database and produces a written report. The Voice Operated Information System (VOIS), developed by USACERL and Automated Sciences Group, through a ESACERL cooperative research and development agreement (CRDA), is an improved voice recognition system based on the concepts and function of the VAIS. To determine the applicability of the VOIS to Corps of Engineers construction projects, Technology Transfer Test Bad (T3B) funds were provided to the Corps of Engineers National Security Agency (NSA) Area Office (Fort Meade) to procure and implement the VOIS, and to train personnel in its use. This report summarizes the NSA application of the VOIS to quality assurance inspection of radio frequency shielding and to progress payment logs, and concludes that the VOIS is an easily implemented system that can offer improvements when applied to repetitive inspection procedures. Use of VOIS can save time during inspection, improve documentation storage, and provide flexible retrieval of stored information.

  5. Analysis for RSG-GAS operational characteristics of reactor cooling system

    International Nuclear Information System (INIS)

    Nurhappy, T.

    1998-01-01

    Analysis of operational characteristics of reactor cooling systems (JE01 and PA) is aimed at determining the effects of operation and maintenance patterns to the operational characteristic of the system. Analysis is carried out by virtue of the operating and maintenance data from 1987 to 1997, comprising the operating hours (duration) and data on operating failures of the systems. Results of study show that, either separately or jointly, the operating and maintenance patterns will qualitatively affect the operational characteristic of the systems

  6. An analysis of nuclear power plant operating costs

    International Nuclear Information System (INIS)

    1988-01-01

    This report presents the results of a statistical analysis of nonfuel operating costs for nuclear power plants. Most studies of the economic costs of nuclear power have focused on the rapid escalation in the cost of constructing a nuclear power plant. The present analysis found that there has also been substantial escalation in real (inflation-adjusted) nonfuel operating costs. It is important to determine the factors contributing to the escalation in operating costs, not only to understand what has occurred but also to gain insights about future trends in operating costs. There are two types of nonfuel operating costs. The first is routine operating and maintenance expenditures (O and M costs), and the second is large postoperational capital expenditures, or what is typically called ''capital additions.'' O and M costs consist mainly of expenditures on labor, and according to one recently completed study, the majoriy of employees at a nuclear power plant perform maintenance activities. It is generally thought that capital additions costs consist of large maintenance expenditures needed to keep the plants operational, and to make plant modifications (backfits) required by the Nuclear Regulatory Commission (NRC). Many discussions of nuclear power plant operating costs have not considered these capital additions costs, and a major finding of the present study is that these costs are substantial. The objective of this study was to determine why nonfuel operating costs have increased over the past decade. The statistical analysis examined a number of factors that have influenced the escalation in real nonfuel operating costs and these are discussed in this report. 4 figs, 19 tabs

  7. Condition Monitoring Of Operating Pipelines With Operational Modal Analysis Application

    Directory of Open Access Journals (Sweden)

    Mironov Aleksey

    2015-12-01

    Full Text Available In the petroleum, natural gas and petrochemical industries, great attention is being paid to safety, reliability and maintainability of equipment. There are a number of technologies to monitor, control, and maintain gas, oil, water, and sewer pipelines. The paper focuses on operational modal analysis (OMA application for condition monitoring of operating pipelines. Special focus is on the topicality of OMA for definition of the dynamic features of the pipeline (frequencies and mode shapes in operation. The research was conducted using two operating laboratory models imitated a part of the operating pipeline. The results of finite-element modeling, identification of pipe natural modes and its modification under the influence of virtual failure are discussed. The work considers the results of experimental research of dynamic behavior of the operating pipe models using one of OMA techniques and comparing dynamic properties with the modeled data. The study results demonstrate sensitivity of modal shape parameters to modification of operating pipeline technical state. Two strategies of pipeline repair – with continuously condition-based monitoring with proposed technology and without such monitoring, was discussed. Markov chain reliability models for each strategy were analyzed and reliability improvement factor for proposed technology of monitoring in compare with traditional one was evaluated. It is resumed about ability of operating pipeline condition monitoring by measuring dynamic deformations of the operating pipe and OMA techniques application for dynamic properties extraction.

  8. 30 CFR 250.261 - What environmental impact analysis (EIA) information must accompany the DPP or DOCD?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What environmental impact analysis (EIA) information must accompany the DPP or DOCD? 250.261 Section 250.261 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Plans and Information Contents of...

  9. MPCV Exercise Operational Volume Analysis

    Science.gov (United States)

    Godfrey, A.; Humphreys, B.; Funk, J.; Perusek, G.; Lewandowski, B. E.

    2017-01-01

    In order to minimize the loss of bone and muscle mass during spaceflight, the Multi-purpose Crew Vehicle (MPCV) will include an exercise device and enough free space within the cabin for astronauts to use the device effectively. The NASA Digital Astronaut Project (DAP) has been tasked with using computational modeling to aid in determining whether or not the available operational volume is sufficient for in-flight exercise.Motion capture data was acquired using a 12-camera Smart DX system (BTS Bioengineering, Brooklyn, NY), while exercisers performed 9 resistive exercises without volume restrictions in a 1g environment. Data were collected from two male subjects, one being in the 99th percentile of height and the other in the 50th percentile of height, using between 25 and 60 motion capture markers. Motion capture data was also recorded as a third subject, also near the 50th percentile in height, performed aerobic rowing during a parabolic flight. A motion capture system and algorithms developed previously and presented at last years HRP-IWS were utilized to collect and process the data from the parabolic flight [1]. These motions were applied to a scaled version of a biomechanical model within the biomechanical modeling software OpenSim [2], and the volume sweeps of the motions were visually assessed against an imported CAD model of the operational volume. Further numerical analysis was performed using Matlab (Mathworks, Natick, MA) and the OpenSim API. This analysis determined the location of every marker in space over the duration of the exercise motion, and the distance of each marker to the nearest surface of the volume. Containment of the exercise motions within the operational volume was determined on a per-exercise and per-subject basis. The orientation of the exerciser and the angle of the footplate were two important factors upon which containment was dependent. Regions where the exercise motion exceeds the bounds of the operational volume have been

  10. INFORMATION SYSTEM OF THE FINANCIAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    MIRELA MONEA

    2013-12-01

    Full Text Available Financial analysis provides the information necessary for decision making, and also helps both the external and internal users of these. The results of the financial analysis work are dependent on the quality, accuracy, relevance and effectiveness of the information collected, and processed. Essential sources of information for financial analysis are financial statements, which are considered the raw material of financial analysis. One of the financial statements -the balance sheet - provides information about assets, liabilities, equity, liquidity, solvency, risk, financial flexibility. The profit and loss account is a synthesis accounting document, part of the financial statement reporting enterprise financial performances during of a specified accounting period and summarizes all revenues earned and expenses of an accounting period and reports the results.

  11. Competition analysis on the operating system market using principal component analysis

    Directory of Open Access Journals (Sweden)

    Brătucu, G.

    2011-01-01

    Full Text Available Operating system market has evolved greatly. The largest software producer in the world, Microsoft, dominates the operating systems segment. With three operating systems: Windows XP, Windows Vista and Windows 7 the company held a market share of 87.54% in January 2011. Over time, open source operating systems have begun to penetrate the market very strongly affecting other manufacturers. Companies such as Apple Inc. and Google Inc. penetrated the operating system market. This paper aims to compare the best-selling operating systems on the market in terms of defining characteristics. To this purpose the principal components analysis method was used.

  12. One-Click Data Analysis Software for Science Operations

    Science.gov (United States)

    Navarro, Vicente

    2015-12-01

    One of the important activities of ESA Science Operations Centre is to provide Data Analysis Software (DAS) to enable users and scientists to process data further to higher levels. During operations and post-operations, Data Analysis Software (DAS) is fully maintained and updated for new OS and library releases. Nonetheless, once a Mission goes into the "legacy" phase, there are very limited funds and long-term preservation becomes more and more difficult. Building on Virtual Machine (VM), Cloud computing and Software as a Service (SaaS) technologies, this project has aimed at providing long-term preservation of Data Analysis Software for the following missions: - PIA for ISO (1995) - SAS for XMM-Newton (1999) - Hipe for Herschel (2009) - EXIA for EXOSAT (1983) Following goals have guided the architecture: - Support for all operations, post-operations and archive/legacy phases. - Support for local (user's computer) and cloud environments (ESAC-Cloud, Amazon - AWS). - Support for expert users, requiring full capabilities. - Provision of a simple web-based interface. This talk describes the architecture, challenges, results and lessons learnt gathered in this project.

  13. Analysis and design on airport safety information management system

    Directory of Open Access Journals (Sweden)

    Yan Lin

    2017-01-01

    Full Text Available Airport safety information management system is the foundation of implementing safety operation, risk control, safety performance monitor, and safety management decision for the airport. The paper puts forward the architecture of airport safety information management system based on B/S model, focuses on safety information processing flow, designs the functional modules and proposes the supporting conditions for system operation. The system construction is helpful to perfecting the long effect mechanism driven by safety information, continually increasing airport safety management level and control proficiency.

  14. Improving CANDU plant operation and maintenance through retrofit information technology systems

    International Nuclear Information System (INIS)

    Lupton, L. R.; Judd, R. A.

    1998-01-01

    CANDU plant owners are facing an increasingly competitive environment for the generation of electricity. To meet this challenge, all owners have identified that information technology offers opportunities for significant improvements in CANDU operation, maintenance and administration (OM and A) costs. Targeted information technology application areas include instrumentation and control, engineering, construction, operations and plant information management. These opportunities also pose challenges and issues that must be addressed if the full benefits of the advances in information technology are to be achieved. Key among these are system hardware and software maintenance, and obsolescence protection. AECL has been supporting CANDU stations with the initial development and evaluation of systems to improve plant performance and cost. Five key initiatives that have been implemented or are in the process of being implemented in some CANDU plants to achieve cooperational benefits include: critical safety parameter monitor system; advanced computerized annunciation system; plant historical data system; plant display system; and digital protection system. Each system will be described in terms of its role in enhancing current CANDU plant performance and how they will contribute to future CANDU plant performance. (author). 8 refs., 3 figs

  15. Process-aware information systems : design, enactment and analysis

    NARCIS (Netherlands)

    Aalst, van der W.M.P.; Wah, B.W.

    2009-01-01

    Process-aware information systems support operational business processes by combining advances in information technology with recent insights from management science. Workflow management systems are typical examples of such systems. However, many other types of information systems are also "process

  16. Formal specification and implementation of operations in information management systems

    International Nuclear Information System (INIS)

    Sandewall, E.

    1983-02-01

    Among information management systems we include general purpose systems, such as text editors and data editors (forms management systems), as well as special purpose systems such as mail systems and computer based calendars. Based on a method for formal specification of some aspects of IMS, namely the structure of the data base, the update operations, and the user dialogue, the paper shows how reasonable procedures for executing IMS operations can be written in the notation of a first-order theory, in such a way that the procedure is a logical consequence of the specification. (Author)

  17. Safety analysis, 200 Area, Savannah River Plant H-Canyon operations. Supplement 5

    Energy Technology Data Exchange (ETDEWEB)

    Beary, M M; Collier, C D; Fairobent, L A; Graham, R F; Mason, C L; McDuffee, W T; Owen, T L; Walker, D H [Science Applications International Corp., San Diego, CA (United States)

    1986-02-01

    The H-Canyon facility is located in the 200 Separations Area and uses the HM process to separate uranium, neptunium, plutonium, and fission products. Irradiated uranium fuels containing {sup 235}U at enrichments from 1.1% to 94% are processed and recovered, along with neptunium and plutonium isotopes. This Safety Analysis Report (SAR) documents an analysis of the H-Canyon operations and is an update to a section of a previous SAR. This SAR documents an analysis of the H-Canyon and is one of a series of documents for the Separations Area as specified in the Savannah River Implementation Plans. A substantial amount of the information supporting the Conclusions of this SAR is found in the Systems Analysis. Some H-Canyon equipment has been updated during the time between the Systems Analysis and this SAR and a complete description of this equipment is included in this report. The primary purpose of the analysis was to demonstrate that the H-Carbon can be operated without due risk to onsite or offsite populations and to the environment. In this report, risk is defined an the expected frequency of an accident, multiplied by the resulting radiological consequence in person-rem. The units of risk for radiological does are person-rem/year. Maximum individual exposure values have also been calculated and reported.

  18. Investigation of relation between operator's mental workload and information flow in accident diagnosis tasks of nuclear power plant

    International Nuclear Information System (INIS)

    Ha, Chang Hoon; Kim, Jong Hyun; Seong, Poong Hyun

    2004-01-01

    In the main control room (MCR) of a nuclear power plant (NPP), there are lots of dynamic information sources for MCR operator's situation awareness. As the human-machine interface in MCR is advanced, operator's information acquisition, information gathering and decision-making is becoming an important part to maintain the effective and safe operation of NPPs. Diagnostic task in complex and huge systems like NPP is the most difficult and mental effort-demanding for operators. This research investigates the relation between operator's mental workload and information flow in accident diagnosis tasks. The amount of information flow is quantified, using information flow model and Conant's model, a kind of information theory. For the mental workload measure, eye blink rate, blink duration, fixation time, number of fixation, and gaze direction are measured during accident diagnosis tasks. Subjective methods such as NASA-Task Load Index (NASA-TLX) and Modified Cooper-Harper (MCH) method are also used in the experiment. It is shown that the operator's mental workload has significant relation to information flow of diagnosis task. It makes possible to predict the mental workload through the quantity of the information flow of a system

  19. Trust and Influence in the Information Age: Operational Requirements for Network Centric Warfare

    National Research Council Canada - National Science Library

    Blatt, Nicole

    2004-01-01

    ...) based on information technology. This thesis will show that the Information RMA not only exists, but will also reshape how we plan, operate, educate, organize, train, and equip forces for the 21st century...

  20. Operational Analysis on Torpedo Defence

    NARCIS (Netherlands)

    Grootendorst, H.J.; Benders, F.P.A.; Fitski, H.J.; Veldhoven, E.R. van

    2007-01-01

    Since 1998, TNO Defence, Security and Safety has performed operational analysis with the Underwater Warfare Testbed, which provides an environment for evaluation and validation of systems, concepts, and tactics. On top of this testbed the Torpedo Defence System TestBed has been built to simulate

  1. Ex post power economic analysis of record of decision operational restrictions at Glen Canyon Dam.

    Energy Technology Data Exchange (ETDEWEB)

    Veselka, T. D.; Poch, L. A.; Palmer, C. S.; Loftin, S.; Osiek, B; Decision and Information Sciences; Western Area Power Administration

    2010-07-31

    On October 9, 1996, Bruce Babbitt, then-Secretary of the U.S. Department of the Interior signed the Record of Decision (ROD) on operating criteria for the Glen Canyon Dam (GCD). Criteria selected were based on the Modified Low Fluctuating Flow (MLFF) Alternative as described in the Operation of Glen Canyon Dam, Colorado River Storage Project, Arizona, Final Environmental Impact Statement (EIS) (Reclamation 1995). These restrictions reduced the operating flexibility of the hydroelectric power plant and therefore its economic value. The EIS provided impact information to support the ROD, including an analysis of operating criteria alternatives on power system economics. This ex post study reevaluates ROD power economic impacts and compares these results to the economic analysis performed prior (ex ante) to the ROD for the MLFF Alternative. On the basis of the methodology used in the ex ante analysis, anticipated annual economic impacts of the ROD were estimated to range from approximately $15.1 million to $44.2 million in terms of 1991 dollars ($1991). This ex post analysis incorporates historical events that took place between 1997 and 2005, including the evolution of power markets in the Western Electricity Coordinating Council as reflected in market prices for capacity and energy. Prompted by ROD operational restrictions, this analysis also incorporates a decision made by the Western Area Power Administration to modify commitments that it made to its customers. Simulated operations of GCD were based on the premise that hourly production patterns would maximize the economic value of the hydropower resource. On the basis of this assumption, it was estimated that economic impacts were on average $26.3 million in $1991, or $39 million in $2009.

  2. A computational model for knowledge-driven monitoring of nuclear power plant operators based on information theory

    International Nuclear Information System (INIS)

    Kim, Man Cheol; Seong, Poong Hyun

    2006-01-01

    To develop operator behavior models such as IDAC, quantitative models for the cognitive activities of nuclear power plant (NPP) operators in abnormal situations are essential. Among them, only few quantitative models for the monitoring and detection have been developed. In this paper, we propose a computational model for the knowledge-driven monitoring, which is also known as model-driven monitoring, of NPP operators in abnormal situations, based on the information theory. The basic assumption of the proposed model is that the probability that an operator shifts his or her attention to an information source is proportional to the expected information from the information source. A small experiment performed to evaluate the feasibility of the proposed model shows that the predictions made by the proposed model have high correlations with the experimental results. Even though it has been argued that heuristics might play an important role on human reasoning, we believe that the proposed model can provide part of the mathematical basis for developing quantitative models for knowledge-driven monitoring of NPP operators when NPP operators are assumed to behave very logically

  3. Plant operational states analysis in low power and shutdown PSA

    International Nuclear Information System (INIS)

    He Jiandong; Qiu Yongping; Zhang Qinfang; An Hongzhen; Li Maolin

    2013-01-01

    The purpose of Plant Operational States (POS) analysis is to disperse the continuous and dynamic process of low power and shutdown operation, which is the basis of developing event tree models for accident sequence analysis. According to the design of a 300 MW Nuclear Power Plant Project, operating experience and procedures of the reference plant, a detailed POS analysis is carried out based on relative criteria. Then, several kinds of POS are obtained, and the duration of each POS is calculated according to the operation records of the reference plant. The POS analysis is an important element in low power and shutdown PSA. The methodology and contents provide reference for POS analysis. (authors)

  4. Office of Analysis and Evaluation of Operational Data 1989 annual report, Power reactors

    International Nuclear Information System (INIS)

    1990-07-01

    The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1989. The report is published in two separate parts. This document, NUREG-1272, Vol. 4, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. This report also compiles the status of staff actions resulting from previous Incident Investigation Team (IIT) reports. 16 figs., 9 tabs

  5. Technology and Policy Challenges in the Adoption and Operation of Health Information Exchange Systems.

    Science.gov (United States)

    Ji, Hyerim; Yoo, Sooyoung; Heo, Eun-Young; Hwang, Hee; Kim, Jeong-Whun

    2017-10-01

    This study aimed to identify problems and issues that arise with the implementation of online health information exchange (HIE) systems in a medical environment and to identify solutions to facilitate the successful operation of future HIE systems in primary care clinics and hospitals. In this study, the issues that arose during the establishment and operation of an HIE system in a hospital were identified so that they could be addressed to enable the successful establishment and operation of a standard-based HIE system. After the issues were identified, they were reviewed and categorized by a group of experts that included medical information system experts, doctors, medical information standard experts, and HIE researchers. Then, solutions for the identified problems were derived based on the system development, operation, and improvement carried out during this work. Twenty-one issues were identified during the implementation and operation of an online HIE system. These issues were then divided into four categories: system architecture and standards, documents and data items, consent of HIE, and usability. We offer technical and policy recommendations for various stakeholders based on the experiences of operating and improving the online HIE system in the medical field. The issues and solutions identified in this study regarding the implementation and operate of an online HIE system can provide valuable insight for planners to enable them to successfully design and operate such systems at a national level in the future. In addition, policy support from governments is needed.

  6. Information Operations: The Least Applied Element of U.S. National Power

    National Research Council Canada - National Science Library

    Ferguson, Quill

    2004-01-01

    Information operations, one of the four elements of U.S. national power, is supreme in defending the country against foreign or domestic adversaries and winning hearts and minds both at home and internationally...

  7. Information Operations, Electronic Warfare, and Cyberwar: Capabilities and Related Policy Issues

    National Research Council Canada - National Science Library

    Wilson, Clay

    2007-01-01

    .... It also suggests related policy issues of potential interest to Congress. For military planners, the control of information is critical to military success, and communications networks and computers are of vital operational importance...

  8. Analysis and design of hospital management information system based on UML

    Science.gov (United States)

    Ma, Lin; Zhao, Huifang; You, Shi Jun; Ge, Wenyong

    2018-05-01

    With the rapid development of computer technology, computer information management system has been utilized in many industries. Hospital Information System (HIS) is in favor of providing data for directors, lightening the workload for the medical workers, and improving the workers efficiency. According to the HIS demand analysis and system design, this paper focus on utilizing unified modeling language (UML) models to establish the use case diagram, class diagram, sequence chart and collaboration diagram, and satisfying the demands of the daily patient visit, inpatient, drug management and other relevant operations. At last, the paper summarizes the problems of the system and puts forward an outlook of the HIS system.

  9. 78 FR 64526 - Information Collection Activities: Sulphur Operations; Submitted for Office of Management and...

    Science.gov (United States)

    2013-10-29

    ...: Sulphur Operations; Submitted for Office of Management and Budget (OMB) Review; Comment Request ACTION: 30... paperwork requirements in the regulations under Subpart P, Sulphur Operations. This notice also provides the..., Currently Under Review). SUPPLEMENTARY INFORMATION: Title: 30 CFR 250, Subpart P, Sulphur Operations. OMB...

  10. Construction Operations Building Information Exchange (COBIE): Requirements Definition and Pilot Implementation Standard

    Science.gov (United States)

    2007-06-01

    Swalley U.S. Department of State, Overseas Buildings Operations Toby Wilson U.S. Army, Corps of Engineers, Engineer R&D Center Jeff Wix AEC3 The...exchanged in COBIE. To map those information exchanges to the IFC model, the Information Delivery Manual (IDM) process [ Wix 2007] was also used. The...Folksonomy. Wikimedia Foundation. http://en.wikipedia.org/wiki/Folksonomy/, accessed 3 August 2007. Wix , Jeffrey. 2007. Information Delivery Manual

  11. Analysis of Operators Comments on the PSF Questionnaire of the Task Complexity Experiment 2003/2004

    Energy Technology Data Exchange (ETDEWEB)

    Torralba, B.; Martinez-Arias, R.

    2007-07-01

    Human Reliability Analysis (HRA) methods usually take into account the effect of Performance Shaping Factors (PSF). Therefore, the adequate treatment of PSFs in HRA of Probabilistic Safety Assessment (PSA) models has a crucial importance. There is an important need for collecting PSF data based on simulator experiments. During the task complexity experiment 2003-2004, carried out in the BWR simulator of Halden Man-Machine Laboratory (HAMMLAB), there was a data collection on PSF by means of a PSF Questionnaire. Seven crews (composed of shift supervisor, reactor operator and turbine operator) from Swedish Nuclear Power Plants participated in the experiment. The PSF Questionnaire collected data on the factors: procedures, training and experience, indications, controls, team management, team communication, individual work practice, available time for the tasks, number of tasks or information load, masking and seriousness. The main statistical significant results are presented on Performance Shaping Factors data collection and analysis of the task complexity experiment 2003/2004 (HWR-810). The analysis of the comments about PSFs, which were provided by operators on the PSF Questionnaire, is described. It has been summarised the comments provided for each PSF on the scenarios, using a content analysis technique. (Author)

  12. Analysis of Operators Comments on the PSF Questionnaire of the Task Complexity Experiment 2003/2004

    International Nuclear Information System (INIS)

    Torralba, B.; Martinez-Arias, R.

    2007-01-01

    Human Reliability Analysis (HRA) methods usually take into account the effect of Performance Shaping Factors (PSF). Therefore, the adequate treatment of PSFs in HRA of Probabilistic Safety Assessment (PSA) models has a crucial importance. There is an important need for collecting PSF data based on simulator experiments. During the task complexity experiment 2003-2004, carried out in the BWR simulator of Halden Man-Machine Laboratory (HAMMLAB), there was a data collection on PSF by means of a PSF Questionnaire. Seven crews (composed of shift supervisor, reactor operator and turbine operator) from Swedish Nuclear Power Plants participated in the experiment. The PSF Questionnaire collected data on the factors: procedures, training and experience, indications, controls, team management, team communication, individual work practice, available time for the tasks, number of tasks or information load, masking and seriousness. The main statistical significant results are presented on Performance Shaping Factors data collection and analysis of the task complexity experiment 2003/2004 (HWR-810). The analysis of the comments about PSFs, which were provided by operators on the PSF Questionnaire, is described. It has been summarised the comments provided for each PSF on the scenarios, using a content analysis technique. (Author)

  13. Validation and Verification of Operational Land Analysis Activities at the Air Force Weather Agency

    Science.gov (United States)

    Shaw, Michael; Kumar, Sujay V.; Peters-Lidard, Christa D.; Cetola, Jeffrey

    2012-01-01

    The NASA developed Land Information System (LIS) is the Air Force Weather Agency's (AFWA) operational Land Data Assimilation System (LDAS) combining real time precipitation observations and analyses, global forecast model data, vegetation, terrain, and soil parameters with the community Noah land surface model, along with other hydrology module options, to generate profile analyses of global soil moisture, soil temperature, and other important land surface characteristics. (1) A range of satellite data products and surface observations used to generate the land analysis products (2) Global, 1/4 deg spatial resolution (3) Model analysis generated at 3 hours. AFWA recognizes the importance of operational benchmarking and uncertainty characterization for land surface modeling and is developing standard methods, software, and metrics to verify and/or validate LIS output products. To facilitate this and other needs for land analysis activities at AFWA, the Model Evaluation Toolkit (MET) -- a joint product of the National Center for Atmospheric Research Developmental Testbed Center (NCAR DTC), AFWA, and the user community -- and the Land surface Verification Toolkit (LVT), developed at the Goddard Space Flight Center (GSFC), have been adapted to operational benchmarking needs of AFWA's land characterization activities.

  14. 39 CFR 3.6 - Information furnished to Board-financial and operating reports.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Information furnished to Board-financial and operating reports. 3.6 Section 3.6 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE BOARD OF GOVERNORS (ARTICLE III) § 3.6 Information furnished to Board—financial...

  15. Safety analysis of the post-operational phase

    International Nuclear Information System (INIS)

    Berg, H.P.; Ehrlich, D.

    1991-01-01

    The safety analysis of normal operation covers an analytical study of the system parts ultimate repository - waste forms of the ultimate repository system under normal and accidental operation. On that basis a requirement concept has been developed which entails reactions on planning and design of the repository, and requirements of waste products, packagings and permissible activities. The procedure for the operational phase is explained giving the Konrad repository project as an example. (DG) [de

  16. 76 FR 3175 - Proposed Extension of Existing Information Collection; Hoist Operators' Physical Fitness

    Science.gov (United States)

    2011-01-19

    ... Extension of Existing Information Collection; Hoist Operators' Physical Fitness AGENCY: Mine Safety and... fitness. DATES: All comments must be received by midnight Eastern Standard Time on March 21, 2011... 56.19057 and 57.19057 require the annual examination and certification of hoist operators' fitness by...

  17. Energetic Analysis of Poultry Processing Operations

    Directory of Open Access Journals (Sweden)

    Simeon Olatayo JEKAYINFA

    2007-01-01

    Full Text Available Energy audit of three poultry processing plants was conducted in southwestern Nigeria. The plants were grouped into three different categories based on their production capacities. The survey involved all the five easily defined unit operations utilized by the poultry processing industry and the experimental design allowed the energy consumed in each unit operation to be measured. The results of the audit revealed that scalding & defeathering is the most energy intensive unit operation in all the three plant categories, averagely accounting for about 44% of the total energy consumption in the processing plants. Other processing operations consuming energy in the following order are eviscerating (17.5%, slaughtering (17%, washing & chilling (16% and packing (6%. The results of the study clearly indicated that the least mechanized of the plants consumed the highest energy (50.36 MJ followed by the semi-mechanized plant (28.04 MJ and the most mechanized plant (17.83 MJ. The energy audits have provided baseline information needed for carrying out budgeting, forecasting energy requirements and planning plant expansion in the poultry processing industries in the study area.

  18. Information needs analysis principles and practice in information organizations

    CERN Document Server

    Dorner, Daniel G; Calvert, Philip J

    2010-01-01

    If you want to provide an information service that truly fulfils your users' needs, this book is essential reading. The book supports practitioners in developing an information needs analysis strategy and offers the necessary professional skills and techniques to do so.

  19. Using Micro-Synchrophasor Data for Advanced Distribution Grid Planning and Operations Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, Emma [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kiliccote, Sila [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McParland, Charles [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Roberts, Ciaran [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-07-01

    This report reviews the potential for distribution-grid phase-angle data that will be available from new micro-synchrophasors (µPMUs) to be utilized in existing distribution-grid planning and operations analysis. This data could augment the current diagnostic capabilities of grid analysis software, used in both planning and operations for applications such as fault location, and provide data for more accurate modeling of the distribution system. µPMUs are new distribution-grid sensors that will advance measurement and diagnostic capabilities and provide improved visibility of the distribution grid, enabling analysis of the grid’s increasingly complex loads that include features such as large volumes of distributed generation. Large volumes of DG leads to concerns on continued reliable operation of the grid, due to changing power flow characteristics and active generation, with its own protection and control capabilities. Using µPMU data on change in voltage phase angle between two points in conjunction with new and existing distribution-grid planning and operational tools is expected to enable model validation, state estimation, fault location, and renewable resource/load characterization. Our findings include: data measurement is outstripping the processing capabilities of planning and operational tools; not every tool can visualize a voltage phase-angle measurement to the degree of accuracy measured by advanced sensors, and the degree of accuracy in measurement required for the distribution grid is not defined; solving methods cannot handle the high volumes of data generated by modern sensors, so new models and solving methods (such as graph trace analysis) are needed; standardization of sensor-data communications platforms in planning and applications tools would allow integration of different vendors’ sensors and advanced measurement devices. In addition, data from advanced sources such as µPMUs could be used to validate models to improve

  20. Electronic Warfare (EW) Historical Perspectives and Its Relationship to Information Operations (IO) - Considerations for Turkey

    National Research Council Canada - National Science Library

    Kucukozyigit, Ali C

    2006-01-01

    ...) and Information Operations (IO) core, supporting and related competencies. Understanding the definitions of information and its value, information superiority, and the decision making cycle provides the foundation for the thesis...

  1. 78 FR 77484 - Extension of Agency Information Collection Activity Under OMB Review: Pipeline System Operator...

    Science.gov (United States)

    2013-12-23

    ... Officer, Office of Information Technology (OIT), TSA-11, Transportation Security Administration, 601 South... Information Collection Activity Under OMB Review: Pipeline System Operator Security Information AGENCY... Transportation Security Administration (TSA) has forwarded the Information Collection Request (ICR), Office of...

  2. Analysis of the ITER cryoplant operational modes

    International Nuclear Information System (INIS)

    Henry, D.; Journeaux, J.Y.; Roussel, P.; Michel, F.; Poncet, J.M.; Girard, A.; Kalinin, V.; Chesny, P.

    2007-01-01

    In the framework of an EFDA task, CEA is carrying out an analysis of the various ITER cryoplant operational modes. According to the project integration document, ITER is designed to be operated 365 days per year in order to optimize the available time of the Tokamak. It is anticipated that operation will be performed in long periods separated by maintenance periods (e.g. 10 days continuous operation and 1 week break) with annual or bi-annual major shutdown periods of a few months for maintenance, further installation and commissioning. For this operation schedule, auxiliary subsystems like the cryoplant and the cryodistribution have to cope with different heat loads which depend on the different ITER operating states. The cryoplant consists of four identical 4.5 K refrigerators and two 80 K helium loops coupled with two LN2 modules. All of these cryogenic subsystems have to operate in parallel to remove the heat loads from the magnet, 80 K shields, cryopumps and other small users. After a brief recall of the main particularities of a cryogenic system operating in a Tokamak environment, the first part of this study is dedicated to the assessment of the main ITER operation states. A new design of refrigeration loop for the HTS current leads, the updated layout of the cryodistribution system and revised strategy for operations of the cryopumps have been taken into consideration. The relevant normal operating scenarios of the cryoplant are checked for the typical ITER operating states like plasma operation state, short term stand by, short term maintenance, or test and conditioning state. The second part of the paper is dedicated to the abnormal operating modes coming from the magnets and from those generated by the cryoplant itself. The occurrence of a fast discharge or a quench of the magnets generates large heat loads disturbances and produces exceptional high mass flow rates which have to be managed by the cryoplant, while a failure of a cryogenic component induces

  3. Advanced operation strategy for feed-and-bleed operation in an OPR1000

    International Nuclear Information System (INIS)

    Kim, Bo Gyung; Yoon, Ho Joon; Kim, Jaewhan; Kang, Hyun Gook

    2016-01-01

    Highlights: • Advanced operating strategy covers all necessary conditions for F&B operation. • Advanced operating strategy identifies the urgency of F&B operation. • An advanced operating strategy for F&B operation is developed using a decision tree. • Human error probability is re-estimated based on a thermohydraulic analysis and K-HRA method. • An advanced operation strategy provides indications under various plant situations. - Abstract: When the secondary side is unavailable in a pressurized water reactor (PWR), heat from the core will accumulate in the primary side causing core damage. In this situation a heat removal mechanism called feed-and-bleed operation (F&B operation) must be used, which is a process of directly cooling the primary reactor cooling system (RCS). However, conventional operation strategy in emergency operating procedures (EOPs) does not cover all possible conditions to initiate F&B operation. If the EOP informs on the urgency of F&B operation, operators will be able to more clearly make decisions regarding F&B operation initiation. In order to cover all possible scenarios for F&B operation and systematically inform its urgency, an advanced operating strategy using a decision tree is developed in this study. The plant condition can be classified according to failure of secondary side, RCS pressure condition, injectable inventory to RCS, and remaining core inventory. RCS pressure, core level, and RCS temperature are representative indicators which provide information regarding the initiation of F&B operation. Indicators can be selected based on their detectability and quantification, and a decision tree is developed according to combinations of indicators. To estimate the effects of the advanced operation strategy, human error probability (HEP) of F&B operation is re-estimated based on a thermohydraulic analysis. The available time for operators to initiate F&B operation is also re-estimated to obtain more realistic data. This

  4. Enhanced Operation of Electricity Distribution Grids Through Smart Metering PLC Network Monitoring, Analysis and Grid Conditioning

    Directory of Open Access Journals (Sweden)

    Iker Urrutia

    2013-01-01

    Full Text Available Low Voltage (LV electricity distribution grid operations can be improved through a combination of new smart metering systems’ capabilities based on real time Power Line Communications (PLC and LV grid topology mapping. This paper presents two novel contributions. The first one is a new methodology developed for smart metering PLC network monitoring and analysis. It can be used to obtain relevant information from the grid, thus adding value to existing smart metering deployments and facilitating utility operational activities. A second contribution describes grid conditioning used to obtain LV feeder and phase identification of all connected smart electric meters. Real time availability of such information may help utilities with grid planning, fault location and a more accurate point of supply management.

  5. An analysis of repository waste-handling operations

    International Nuclear Information System (INIS)

    Dennis, A.W.

    1990-09-01

    This report has been prepared to document the operational analysis of waste-handling facilities at a geologic repository for high-level nuclear waste. The site currently under investigation for the geologic repository is located at Yucca Mountain, Nye County, Nevada. The repository waste-handling operations have been identified and analyzed for the year 2011, a steady-state year during which the repository receives spent nuclear fuel containing the equivalent of 3000 metric tons of uranium (MTU) and defense high-level waste containing the equivalent of 400 MTU. As a result of this analysis, it has been determined that the waste-handling facilities are adequate to receive, prepare, store, and emplace the projected quantity of waste on an annual basis. In addition, several areas have been identified where additional work is required. The recommendations for future work have been divided into three categories: items that affect the total waste management system, operations within the repository boundary, and the methodology used to perform operational analyses for repository designs. 7 refs., 48 figs., 11 tabs

  6. Use of technology to support information needs for continuity of operations planning in public health: a systematic review.

    Science.gov (United States)

    Reeder, Blaine; Turner, Anne; Demiris, George

    2010-01-01

    Continuity of operations planning focuses on an organization's ability to deliver essential services before, during and after an emergency. Public health leaders must make decisions based on information from many sources and their information needs are often facilitated or hindered by technology. The aim of this study is to provide a systematic review of studies of technology projects that address public health continuity of operations planning information needs and to discuss patterns, themes, and challenges to inform the design of public health continuity of operations information systems. To return a comprehensive results set in an under-explored area, we searched broadly in the Medline and EBSCOHost bibliographic databases using terms from prior work in public health emergency management and continuity of operations planning in other domains. In addition, we manually searched the citation lists of publications included for review. A total of 320 publications were reviewed. Twenty studies were identified for inclusion (twelve risk assessment decision support tools, six network and communications-enabled decision support tools, one training tool and one dedicated video-conferencing tool). Levels of implementation for information systems in the included studies range from proposed frameworks to operational systems. There is a general lack of documented efforts in the scientific literature for technology projects about public health continuity of operations planning. Available information about operational information systems suggest inclusion of public health practitioners in the design process as a factor in system success.

  7. LOFT Augmented Operator Capability Program

    International Nuclear Information System (INIS)

    Hollenbeck, D.A.; Krantz, E.A.; Hunt, G.L.; Meyer, O.R.

    1980-01-01

    The outline of the LOFT Augmented Operator Capability Program is presented. This program utilizes the LOFT (Loss-of-Fluid Test) reactor facility which is located at the Idaho National Engineering Laboratory and the LOFT operational transient experiment series as a test bed for methods of enhancing the reactor operator's capability for safer operation. The design of an Operational Diagnotics and Display System is presented which was backfit to the existing data acquisition computers. Basic color-graphic displays of the process schematic and trend type are presented. In addition, displays were developed and are presented which represent safety state vector information. A task analysis method was applied to LOFT reactor operating procedures to test its usefulness in defining the operator's information needs and workload

  8. Communication Analysis of Information Complexes.

    Science.gov (United States)

    Malik, M. F.

    Communication analysis is a tool for perceptual assessment of existing or projected information complexes, i.e., an established reality perceived by one or many humans. An information complex could be of a physical nature, such as a building, landscape, city street; or of a pure informational nature, such as a film, television program,…

  9. Combining qualitative and quantitative operational research methods to inform quality improvement in pathways that span multiple settings

    Science.gov (United States)

    Crowe, Sonya; Brown, Katherine; Tregay, Jenifer; Wray, Jo; Knowles, Rachel; Ridout, Deborah A; Bull, Catherine; Utley, Martin

    2017-01-01

    Background Improving integration and continuity of care across sectors within resource constraints is a priority in many health systems. Qualitative operational research methods of problem structuring have been used to address quality improvement in services involving multiple sectors but not in combination with quantitative operational research methods that enable targeting of interventions according to patient risk. We aimed to combine these methods to augment and inform an improvement initiative concerning infants with congenital heart disease (CHD) whose complex care pathway spans multiple sectors. Methods Soft systems methodology was used to consider systematically changes to services from the perspectives of community, primary, secondary and tertiary care professionals and a patient group, incorporating relevant evidence. Classification and regression tree (CART) analysis of national audit datasets was conducted along with data visualisation designed to inform service improvement within the context of limited resources. Results A ‘Rich Picture’ was developed capturing the main features of services for infants with CHD pertinent to service improvement. This was used, along with a graphical summary of the CART analysis, to guide discussions about targeting interventions at specific patient risk groups. Agreement was reached across representatives of relevant health professions and patients on a coherent set of targeted recommendations for quality improvement. These fed into national decisions about service provision and commissioning. Conclusions When tackling complex problems in service provision across multiple settings, it is important to acknowledge and work with multiple perspectives systematically and to consider targeting service improvements in response to confined resources. Our research demonstrates that applying a combination of qualitative and quantitative operational research methods is one approach to doing so that warrants further

  10. Mobile Virtual Network Operator Information Systems for Increased Sustainability in Utilities

    DEFF Research Database (Denmark)

    Joensen, Hallur Leivsgard; Tambo, Torben

    2011-01-01

    sales from efficiency of business processes, underlying information systems, and the ability to make the link from consumption to cost visual and transparent to consumers. The conclusion is that the energy sector should look into other sectors and learn from information systems which ease up business......, sales and buying processes are separated from physical networks and energy production. This study aims to characterise and evaluate information systems supporting the transformation of the free market-orientation of energy and provision of utilities in a cross-sectorial proposition known as Mobile...... Virtual Network Operator (MVNO). Emphasis is particularly on standardised information systems for automatically linking consumers, sellers and integration of network infrastructure actors. The method used is a feasibility study assessing business and information processes of a forthcoming utilities market...

  11. Study on Network Error Analysis and Locating based on Integrated Information Decision System

    Science.gov (United States)

    Yang, F.; Dong, Z. H.

    2017-10-01

    Integrated information decision system (IIDS) integrates multiple sub-system developed by many facilities, including almost hundred kinds of software, which provides with various services, such as email, short messages, drawing and sharing. Because the under-layer protocols are different, user standards are not unified, many errors are occurred during the stages of setup, configuration, and operation, which seriously affect the usage. Because the errors are various, which may be happened in different operation phases, stages, TCP/IP communication protocol layers, sub-system software, it is necessary to design a network error analysis and locating tool for IIDS to solve the above problems. This paper studies on network error analysis and locating based on IIDS, which provides strong theory and technology supports for the running and communicating of IIDS.

  12. INFORMATION SECURITY: Strengthened Management Needed to Protect Critical Federal Operations and Assets

    National Research Council Canada - National Science Library

    Dodaro, Gene

    1998-01-01

    .... Our most recent report, done at the request of this Committee, delineates the serious information security weaknesses placing critical operations and assets at risk and outlines actions needed...

  13. Information technology made simple

    CERN Document Server

    Carter, Roger

    1991-01-01

    Information Technology: Made Simple covers the full range of information technology topics, including more traditional subjects such as programming languages, data processing, and systems analysis. The book discusses information revolution, including topics about microchips, information processing operations, analog and digital systems, information processing system, and systems analysis. The text also describes computers, computer hardware, microprocessors, and microcomputers. The peripheral devices connected to the central processing unit; the main types of system software; application soft

  14. Information System Hazard Analysis: A Method for Identifying Technology-induced Latent Errors for Safety.

    Science.gov (United States)

    Weber, Jens H; Mason-Blakley, Fieran; Price, Morgan

    2015-01-01

    Many health information and communication technologies (ICT) are safety-critical; moreover, reports of technology-induced adverse events related to them are plentiful in the literature. Despite repeated criticism and calls to action, recent data collected by the Institute of Medicine (IOM) and other organization do not indicate significant improvements with respect to the safety of health ICT systems. A large part of the industry still operates on a reactive "break & patch" model; the application of pro-active, systematic hazard analysis methods for engineering ICT that produce "safe by design" products is sparse. This paper applies one such method: Information System Hazard Analysis (ISHA). ISHA adapts and combines hazard analysis techniques from other safety-critical domains and customizes them for ICT. We provide an overview of the steps involved in ISHA and describe.

  15. International conference Fourier Analysis and Pseudo-Differential Operators

    CERN Document Server

    Turunen, Ville; Fourier Analysis : Pseudo-differential Operators, Time-Frequency Analysis and Partial Differential Equations

    2014-01-01

    This book is devoted to the broad field of Fourier analysis and its applications to several areas of mathematics, including problems in the theory of pseudo-differential operators, partial differential equations, and time-frequency analysis. This collection of 20 refereed articles is based on selected talks given at the international conference “Fourier Analysis and Pseudo-Differential Operators,” June 25–30, 2012, at Aalto University, Finland, and presents the latest advances in the field. The conference was a satellite meeting of the 6th European Congress of Mathematics, which took place in Krakow in July 2012; it was also the 6th meeting in the series “Fourier Analysis and Partial Differential Equations.”

  16. HERBE- Analysis of test operation results

    International Nuclear Information System (INIS)

    Pesic, M. et.al.

    1991-01-01

    This document is part of the safety analyses performed for the RB reactor operation with the coupled fast-thermal system HERBE and is part of the final safety report together with the 'Report on test operation of HERBE for the period Dec. 15 1989 - May 15 1990. This report covers the following main topics: determination of reactivity variations dependent on the variations moderator critical level; determination of reactivity for the flooded neutron converter; and the accident analysis of neutron converter flooding

  17. Harmonic Analysis Associated with the Generalized Weinstein Operator

    Directory of Open Access Journals (Sweden)

    Ahmed Abouelaz

    2015-11-01

    Full Text Available In this paper we consider a generalized Weinstein operator ∆d,α,n on Rd−1×]0,∞[, which generalizes the Weinstein operator ∆d,α, we define the generalized Weinstein intertwining operator Rα,n which turn out to be transmutation operator between ∆d,α,n and the Laplacian operator ∆d. We build the dual of the generalized Weinstein intertwining operatortRα,n, another hand we prove the formula related Rα,n andtRα,n . We exploit these transmutation operators to develop a new harmonic analysis corresponding to ∆d,α,n.

  18. Information theoretic analysis of edge detection in visual communication

    Science.gov (United States)

    Jiang, Bo; Rahman, Zia-ur

    2010-08-01

    Generally, the designs of digital image processing algorithms and image gathering devices remain separate. Consequently, the performance of digital image processing algorithms is evaluated without taking into account the artifacts introduced into the process by the image gathering process. However, experiments show that the image gathering process profoundly impacts the performance of digital image processing and the quality of the resulting images. Huck et al. proposed one definitive theoretic analysis of visual communication channels, where the different parts, such as image gathering, processing, and display, are assessed in an integrated manner using Shannon's information theory. In this paper, we perform an end-to-end information theory based system analysis to assess edge detection methods. We evaluate the performance of the different algorithms as a function of the characteristics of the scene, and the parameters, such as sampling, additive noise etc., that define the image gathering system. The edge detection algorithm is regarded to have high performance only if the information rate from the scene to the edge approaches the maximum possible. This goal can be achieved only by jointly optimizing all processes. People generally use subjective judgment to compare different edge detection methods. There is not a common tool that can be used to evaluate the performance of the different algorithms, and to give people a guide for selecting the best algorithm for a given system or scene. Our information-theoretic assessment becomes this new tool to which allows us to compare the different edge detection operators in a common environment.

  19. International information systems for accident avoidance - the role of the operators

    International Nuclear Information System (INIS)

    Kraegenow, T.

    2007-01-01

    Susceptibility to defects and problems of reliability detected in a plant should be corrected for the future in plants affected by these problems as an important building block in the safety of nuclear power plants. This requires exchanges of specific information among plants and their operators, especially so on an international scale. After the accident in the Swedish Forsmark plant in July 2006, there were indications to the effect that some of the problems discovered there had been known earlier from a different power plant. For this reason, the way in which information about reliability problems and susceptibility to defects is exchanged in the nuclear industry is now under study. The mechanisms involved are compared with practices in civil aviation. The purpose of the exercise is not to recommend one of the two systems as being superior. Instead, it is seen that the exchange of information is organized in completely different ways in the two industries, and that the attitudes of operators are also fundamentally different. The nuclear community and the aviation industry can learn from each other. One obvious solution which could be adopted by the power plant industry is to follow the example of aviation and install a privately organized international information system which would take as nodes power plant vendors instead of national evaluation agencies, as before. (orig.)

  20. Combining Operations Management and Information Systems Curricula: Assessing Alumni Preparations for the Workforce

    Science.gov (United States)

    Silva, David; McFadden, Kathleen L.

    2005-01-01

    The purpose of this study is to explore how well a curriculum that combines operations management and information systems uniquely prepares students for the workforce. To address our research questions, a Web-based survey was developed. We sent our survey to 203 alumni that graduated from the Department of Operations Management and Information…

  1. Overall analysis of meteorological information in the daeduk nuclear complex

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Byung Woo; Lee, Young Bok; Han, Moon Hee; Kim, Eun Han; Suh, Kyung Suk; Hwang, Won Tae; Hong, Suk Boong [Korea Atomic Energy Res. Inst., Taejon (Korea, Republic of)

    1992-12-01

    Problem shooting in tower structure, sensor installation, earth, and cabling have been done with integrated field-test, establishment of data acquisition system, and instrument calibration since the completion of the main tower construction in this year. Procedure guide was also made for the effective management covering instrument operation, calibration and repair. Real measurement has been done during two months from this October after whole integration of equipments. Occurrence of nocturnal inversion layer, fogging, and frequent stable condition of atmospheric stability were shown as the analysis results of measured data which well represented seasonal and regional characteristics in the site. Wireless data transmission to MIPS(Meteorological Information Processing System) has been done after collection in the DAS(data acquision system) where environmental assessment can be done by the developed simulation programs in both cases of normal operation and emergency. (Author).

  2. Operating health analysis of electric power systems

    Science.gov (United States)

    Fotuhi-Firuzabad, Mahmud

    The required level of operating reserve to be maintained by an electric power system can be determined using both deterministic and probabilistic techniques. Despite the obvious disadvantages of deterministic approaches there is still considerable reluctance to apply probabilistic techniques due to the difficulty of interpreting a single numerical risk index and the lack of sufficient information provided by a single index. A practical way to overcome difficulties is to embed deterministic considerations in the probabilistic indices in order to monitor the system well-being. The system well-being can be designated as healthy, marginal and at risk. The concept of system well-being is examined and extended in this thesis to cover the overall area of operating reserve assessment. Operating reserve evaluation involves the two distinctly different aspects of unit commitment and the dispatch of the committed units. Unit commitment health analysis involves the determination of which unit should be committed to satisfy the operating criteria. The concepts developed for unit commitment health, margin and risk are extended in this thesis to evaluate the response well-being of a generating system. A procedure is presented to determine the optimum dispatch of the committed units to satisfy the response criteria. The impact on the response wellbeing being of variations in the margin time, required regulating margin and load forecast uncertainty are illustrated. The effects on the response well-being of rapid start units, interruptible loads and postponable outages are also illustrated. System well-being is, in general, greatly improved by interconnection with other power systems. The well-being concepts are extended to evaluate the spinning reserve requirements in interconnected systems. The interconnected system unit commitment problem is decomposed into two subproblems in which unit scheduling is performed in each isolated system followed by interconnected system evaluation

  3. Applications of human error analysis to aviation and space operations

    International Nuclear Information System (INIS)

    Nelson, W.R.

    1998-01-01

    For the past several years at the Idaho National Engineering and Environmental Laboratory (INEEL) we have been working to apply methods of human error analysis to the design of complex systems. We have focused on adapting human reliability analysis (HRA) methods that were developed for Probabilistic Safety Assessment (PSA) for application to system design. We are developing methods so that human errors can be systematically identified during system design, the potential consequences of each error can be assessed, and potential corrective actions (e.g. changes to system design or procedures) can be identified. These applications lead to different requirements when compared with HR.As performed as part of a PSA. For example, because the analysis will begin early during the design stage, the methods must be usable when only partial design information is available. In addition, the ability to perform numerous ''what if'' analyses to identify and compare multiple design alternatives is essential. Finally, since the goals of such human error analyses focus on proactive design changes rather than the estimate of failure probabilities for PRA, there is more emphasis on qualitative evaluations of error relationships and causal factors than on quantitative estimates of error frequency. The primary vehicle we have used to develop and apply these methods has been a series of prqjects sponsored by the National Aeronautics and Space Administration (NASA) to apply human error analysis to aviation operations. The first NASA-sponsored project had the goal to evaluate human errors caused by advanced cockpit automation. Our next aviation project focused on the development of methods and tools to apply human error analysis to the design of commercial aircraft. This project was performed by a consortium comprised of INEEL, NASA, and Boeing Commercial Airplane Group. The focus of the project was aircraft design and procedures that could lead to human errors during airplane maintenance

  4. Operational amplifier circuits analysis and design

    CERN Document Server

    Nelson, J C C

    1995-01-01

    This book, a revised and updated version of the author's Basic Operational Amplifiers (Butterworths 1986), enables the non-specialist to make effective use of readily available integrated circuit operational amplifiers for a range of applications, including instrumentation, signal generation and processing.It is assumed the reader has a background in the basic techniques of circuit analysis, particularly the use of j notation for reactive circuits, with a corresponding level of mathematical ability. The underlying theory is explained with sufficient but not excessive, detail. A range of compu

  5. Analysis and evaluation of operational data. Annual report, 1996

    International Nuclear Information System (INIS)

    1997-12-01

    The United States Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) has published reports of its activities since 1984. The first report covered January through June of 1984, and the second report covered July through December of 1984. After those first two semiannual reports, AEOD published annual reports of its activities from 1985 through 1993. Beginning with report for 1986, AEOD Annual Reports have been published as NUREG-1272. Beginning with the report for 1987, NUREG-1272 has been published in two parts, No. 1 covering power reactors and No. 2 covering nonreactors (changed to 'nuclear materials' with the 1993 report). AEOD changed its annual report from a calendar year (CY) to a fiscal year report, and added part No. 3 covering technical training, beginning with the combined Annual Report for CY 1994 and fiscal year 1995, NUREG-1272, Vol. 9, Nos. 1-3. This report, NUREG-1272, Vol. 10, No. 2, covers nuclear materials and presents a review of the events and concerns associated with the use of licensed material in applications other than power reactores. NUREG-1272, Vol. 10, No. 1, covers power reactors and presents an overview of the fiscal year 1996 operating experience of the nuclear power industry from the NRC perspective. NUREG-1272, Vol. 10, No. 3, covers technical training and presents the activities of the Technical Training Center in support of the NRC's mission. Throughout these reports, whenever information is presented for a calendar year, it is so designated. Fiscal year information is designated by the four digits of the fiscal year

  6. Operations planning and analysis handbook for NASA/MSFC phase B development projects

    Science.gov (United States)

    Batson, Robert C.

    1986-01-01

    Current operations planning and analysis practices on NASA/MSFC Phase B projects were investigated with the objectives of (1) formalizing these practices into a handbook and (2) suggesting improvements. The study focused on how Science and Engineering (S&E) Operational Personnel support Program Development (PD) Task Teams. The intimate relationship between systems engineering and operations analysis was examined. Methods identified for use by operations analysts during Phase B include functional analysis, interface analysis methods to calculate/allocate such criteria as reliability, Maintainability, and operations and support cost.

  7. Using accounting information systems by operations managers in a project company

    NARCIS (Netherlands)

    Wouters, Marc; van der Veeken, Henk J.M.

    2002-01-01

    This paper describes the results of a case study that investigated the use of accounting information by operations managers in a road building company. There was considerable preplanning before the execution of project activities, but task uncertainty during execution created the need to take

  8. Risk-informed optimal routing of ships considering different damage scenarios and operational conditions

    International Nuclear Information System (INIS)

    Decò, Alberto; Frangopol, Dan M.

    2013-01-01

    The aim of this paper is the development of a risk-informed decision tool for the optimal mission-oriented routing of ships. The strength of the hull is investigated by modeling the midship section with finite elements and by analyzing different damage levels depending on the propagation of plastification throughout the section. Vertical and horizontal flexural interaction is investigated. Uncertainties associated with geometry and material properties are accounted for by means of the implementation of the response surface method. Load effects are evaluated using strip theory. Reliability analysis is performed for several ship operational conditions and considering four different limit states. Then, risk is assessed by including the direct losses associated with five investigated damage states. The effects of corrosion on aged ships are included in the proposed approach. Polar representation of load effects, reliability, and direct risk are presented for a large spectrum of operational conditions. Finally, the optimal routing of ships is obtained by minimizing both the estimated time of arrival and the expected direct risk, which are clearly conflicting objectives. The optimization process provides feasible solutions belonging to the Pareto front. The proposed approach is applied to a Joint High Speed Sealift

  9. Development of Information System for Patients with Cleft Lip and Palate undergoing Operation.

    Science.gov (United States)

    Augsornwan, Darawan; Pattangtanang, Pantamanas; Surakunprapha, Palakorn

    2015-08-01

    Srinagarind Hospital has 150-200 patients with cleft lip and palate each year. When patients are admitted to hospital for surgery patients and family feel they are in a crisis of life, they feel fear anxiety and need to know about how to take care of wound, they worry if patient will feel pain, how to feed patients and many things about patients. Information is very important for patients/family to prevent complications and help their decision process, decrease parents stress and encourage better co-operation. To develop information system for patients with cleft lip-palate undergoing operation. This is an action research divided into 3 phases. Phase 1 Situation review: in this phase we interview, nursing care observation, and review nursing documents about the information giving. Phase 2 Develop information system: focus groups, for discussion about what nurses can do to develop the system to give information to patients/parents. Phase 3 evaluation: by interviewing 61 parents using the structure questionnaire. 100 percent of patients/parents received information but some items were not received. Patients/parents satisfaction was 94.9 percent, no complications. The information system development provides optimal care for patients and family with cleft lip and palate, but needs to improve some techniques or tools to give more information and evaluate further the nursing outcome after.

  10. Discriminative Nonlinear Analysis Operator Learning: When Cosparse Model Meets Image Classification.

    Science.gov (United States)

    Wen, Zaidao; Hou, Biao; Jiao, Licheng

    2017-05-03

    Linear synthesis model based dictionary learning framework has achieved remarkable performances in image classification in the last decade. Behaved as a generative feature model, it however suffers from some intrinsic deficiencies. In this paper, we propose a novel parametric nonlinear analysis cosparse model (NACM) with which a unique feature vector will be much more efficiently extracted. Additionally, we derive a deep insight to demonstrate that NACM is capable of simultaneously learning the task adapted feature transformation and regularization to encode our preferences, domain prior knowledge and task oriented supervised information into the features. The proposed NACM is devoted to the classification task as a discriminative feature model and yield a novel discriminative nonlinear analysis operator learning framework (DNAOL). The theoretical analysis and experimental performances clearly demonstrate that DNAOL will not only achieve the better or at least competitive classification accuracies than the state-of-the-art algorithms but it can also dramatically reduce the time complexities in both training and testing phases.

  11. The War of Ideas and the Role of Information Operations in Counterinsurgency

    National Research Council Canada - National Science Library

    Hunton, Collin T

    2008-01-01

    .... Given the influence of policy at home and abroad within the asymmetric nature of COIN operations, a review of Clausewitz's theory of political conflict will help us understand the role of information...

  12. Thou should not know too much. When lack of information promotes co-operative behaviour. The case of oil-fields in Wyoming, Oklahoma and Texas

    Energy Technology Data Exchange (ETDEWEB)

    Hassler, B

    1998-12-31

    Proper assumptions of information levels are of vital importance in all kinds of analysis of interdependent decision-making. In most cases the rule is; the more information the better. In this paper, however, it is shown that such is not always the case. Lack of information can enhance resource utilisation of resources, when the problem of co-operation is of a Prisoner`s dilemma type, and when iteration of the interaction game is unlikely. The case of oil-fields in the United States has been chosen as an empirical example of the latter. Optimal drilling procedures tend to be chosen more often the less the drillers know about the resource characteristics. This outcome is explained by the structure of the decision-making problem, where low levels of information render it advantageous to choose co-operative strategies 16 refs, 4 figs

  13. Thou should not know too much. When lack of information promotes co-operative behaviour. The case of oil-fields in Wyoming, Oklahoma and Texas

    Energy Technology Data Exchange (ETDEWEB)

    Hassler, B.

    1997-12-31

    Proper assumptions of information levels are of vital importance in all kinds of analysis of interdependent decision-making. In most cases the rule is; the more information the better. In this paper, however, it is shown that such is not always the case. Lack of information can enhance resource utilisation of resources, when the problem of co-operation is of a Prisoner`s dilemma type, and when iteration of the interaction game is unlikely. The case of oil-fields in the United States has been chosen as an empirical example of the latter. Optimal drilling procedures tend to be chosen more often the less the drillers know about the resource characteristics. This outcome is explained by the structure of the decision-making problem, where low levels of information render it advantageous to choose co-operative strategies 16 refs, 4 figs

  14. Information Analysis Methodology for Border Security Deployment Prioritization and Post Deployment Evaluation

    International Nuclear Information System (INIS)

    Booker, Paul M.; Maple, Scott A.

    2010-01-01

    Due to international commerce, cross-border conflicts, and corruption, a holistic, information driven, approach to border security is required to best understand how resources should be applied to affect sustainable improvements in border security. The ability to transport goods and people by land, sea, and air across international borders with relative ease for legitimate commercial purposes creates a challenging environment to detect illicit smuggling activities that destabilize national level border security. Smuggling activities operated for profit or smuggling operations driven by cross border conflicts where militant or terrorist organizations facilitate the transport of materials and or extremists to advance a cause add complexity to smuggling interdiction efforts. Border security efforts are further hampered when corruption thwarts interdiction efforts or reduces the effectiveness of technology deployed to enhance border security. These issues necessitate the implementation of a holistic approach to border security that leverages all available data. Large amounts of information found in hundreds of thousands of documents can be compiled to assess national or regional borders to identify variables that influence border security. Location data associated with border topics of interest may be extracted and plotted to better characterize the current border security environment for a given country or region. This baseline assessment enables further analysis, but also documents the initial state of border security that can be used to evaluate progress after border security improvements are made. Then, border security threats are prioritized via a systems analysis approach. Mitigation factors to address risks can be developed and evaluated against inhibiting factor such as corruption. This holistic approach to border security helps address the dynamic smuggling interdiction environment where illicit activities divert to a new location that provides less resistance

  15. Operating procedures: Fusion Experiments Analysis Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lerche, R.A.; Carey, R.W.

    1984-03-20

    The Fusion Experiments Analysis Facility (FEAF) is a computer facility based on a DEC VAX 11/780 computer. It became operational in late 1982. At that time two manuals were written to aid users and staff in their interactions with the facility. This manual is designed as a reference to assist the FEAF staff in carrying out their responsibilities. It is meant to supplement equipment and software manuals supplied by the vendors. Also this manual provides the FEAF staff with a set of consistent, written guidelines for the daily operation of the facility.

  16. Operating procedures: Fusion Experiments Analysis Facility

    International Nuclear Information System (INIS)

    Lerche, R.A.; Carey, R.W.

    1984-01-01

    The Fusion Experiments Analysis Facility (FEAF) is a computer facility based on a DEC VAX 11/780 computer. It became operational in late 1982. At that time two manuals were written to aid users and staff in their interactions with the facility. This manual is designed as a reference to assist the FEAF staff in carrying out their responsibilities. It is meant to supplement equipment and software manuals supplied by the vendors. Also this manual provides the FEAF staff with a set of consistent, written guidelines for the daily operation of the facility

  17. Operator reliability study for Probabilistic Safety Analysis of an operating research reactor

    International Nuclear Information System (INIS)

    Mohamed, F.; Hassan, A.; Yahaya, R.; Rahman, I.; Maskin, M.; Praktom, P.; Charlie, F.

    2015-01-01

    Highlights: • Human Reliability Analysis (HRA) for Level 1 Probabilistic Safety Analysis (PSA) is performed on research nuclear reactor. • Implemented qualitative HRA framework is addressed. • Human Failure Events of significant impact to the reactor safety are derived. - Abstract: A Level 1 Probabilistic Safety Analysis (PSA) for the TRIGA Mark II research reactor of Malaysian Nuclear Agency has been developed to evaluate the potential risk in its operation. In conjunction to this PSA development, Human Reliability Analysis (HRA) is performed in order to determine human contribution to the risk. The aim of this study is to qualitatively analyze human actions (HAs) involved in the operation of this reactor according to the qualitative part of the HRA framework for PSA which is namely the identification, qualitative screening and modeling of HAs. By performing this framework, Human Failure Events (HFEs) of significant impact to the reactor safety are systematically analyzed and incorporated into the PSA structure. A part of the findings in this study will become the input for the subsequent quantitative part of the HRA framework, i.e. the Human Error Probability (HEP) quantification

  18. Understanding Strategic Information Manoeuvres in Network Media to Advance Cyber Operations: A Case Study Analysing Pro-Russian Separatists’ Cyber Information Operations in Crimean Water Crisis

    Directory of Open Access Journals (Sweden)

    Al-Khateeb Samer

    2016-06-01

    Full Text Available The inexpensive nature and wide availability of emerging media outlets, e.g. social networking sites and blogs makes them easy-to-use weapons, giving power and courage to individuals to form groups that are able to win or at least force concessions from stronger forces. Today, terrorist groups know that opinions can be influenced using networked media and this knowledge empowers and enables them to alienate their audience and sometimes provoke them into violent actions. To understand the strategic information manoeuvres used by such groups, e.g., trans-national terrorist groups, we study the channels (blogs, Twitter, etc. and methods (e.g., influential actors/groups they use to disseminate messages pertaining to recruitment, radicalization, and raising funds. We collect data from several sources, including over 130 blog websites known for pro-Russian propaganda for events such as the Crimean water crisis and Trident Juncture Exercise (TRJE 15. In addition to blogs, we collect data from Twitter for the above-mentioned events to study the crossinfluence of various social media platforms in conducting strategic information manoeuvres. The study shows that groups are able to spread their opinions and create emotional attitudes for their followers through the sophisticated and blended use of these network media platforms via powerful actors, trolls, and botnets. We design social and network science informed methodologies to study the sociotechnical behaviours of trolls and botnets and develop detection tools ready to be deployed for Cyber operations. The tools have been further tested in the information operations of ISIL, e.g., beheading of hostages in orange jump suits. This study helps identifying the actions needed to win this “battle of ideas”.

  19. Combining qualitative and quantitative operational research methods to inform quality improvement in pathways that span multiple settings.

    Science.gov (United States)

    Crowe, Sonya; Brown, Katherine; Tregay, Jenifer; Wray, Jo; Knowles, Rachel; Ridout, Deborah A; Bull, Catherine; Utley, Martin

    2017-08-01

    Improving integration and continuity of care across sectors within resource constraints is a priority in many health systems. Qualitative operational research methods of problem structuring have been used to address quality improvement in services involving multiple sectors but not in combination with quantitative operational research methods that enable targeting of interventions according to patient risk. We aimed to combine these methods to augment and inform an improvement initiative concerning infants with congenital heart disease (CHD) whose complex care pathway spans multiple sectors. Soft systems methodology was used to consider systematically changes to services from the perspectives of community, primary, secondary and tertiary care professionals and a patient group, incorporating relevant evidence. Classification and regression tree (CART) analysis of national audit datasets was conducted along with data visualisation designed to inform service improvement within the context of limited resources. A 'Rich Picture' was developed capturing the main features of services for infants with CHD pertinent to service improvement. This was used, along with a graphical summary of the CART analysis, to guide discussions about targeting interventions at specific patient risk groups. Agreement was reached across representatives of relevant health professions and patients on a coherent set of targeted recommendations for quality improvement. These fed into national decisions about service provision and commissioning. When tackling complex problems in service provision across multiple settings, it is important to acknowledge and work with multiple perspectives systematically and to consider targeting service improvements in response to confined resources. Our research demonstrates that applying a combination of qualitative and quantitative operational research methods is one approach to doing so that warrants further consideration. Published by the BMJ Publishing Group

  20. Collecting operational event data for statistical analysis

    International Nuclear Information System (INIS)

    Atwood, C.L.

    1994-09-01

    This report gives guidance for collecting operational data to be used for statistical analysis, especially analysis of event counts. It discusses how to define the purpose of the study, the unit (system, component, etc.) to be studied, events to be counted, and demand or exposure time. Examples are given of classification systems for events in the data sources. A checklist summarizes the essential steps in data collection for statistical analysis

  1. The plant operating procedure information modeling system for creation and maintenance of procedures

    International Nuclear Information System (INIS)

    Fanto, S.V.; Petras, D.S.; Reiner, R.T.; Frost, D.R.; Orendi, R.G.

    1990-01-01

    This paper reports that as a result of the accident at Three Mile Island, regulatory requirements were issued to upgrade Emergency Operating Procedures for nuclear power plants. The use of human-factored, function-oriented, EOPs were mandated to improve human reliability and to mitigate the consequences of a broad range of initiating events, subsequent failures and operator errors, without having to first diagnose the specific events. The Westinghouse Owners Group responded by developing the Emergency Response Guidelines in a human-factored, two-column format to aid in the transfer of the improved technical information to the operator during transients and accidents. The ERGs are a network of 43 interrelated guidelines which specify operator actions to be taken during plant emergencies to restore the plant to a safe and stable condition. Each utility then translates these guidelines into plant specific EOPs. The creation and maintenance of this large web of interconnecting ERGs/EOPs is an extremely complex task. This paper reports that in order to aid procedure documentation specialists with this time-consuming and tedious task, the Plant Operating Procedure Information Modeling system was developed to provide a controlled and consistent means to build and maintain the ERGs/EOPs and their supporting documentation

  2. HOPE information system review

    Science.gov (United States)

    Suzuki, Yoshiaki; Nishiyama, Kenji; Ono, Shuuji; Fukuda, Kouin

    1992-08-01

    An overview of the review conducted on H-2 Orbiting Plane (HOPE) is presented. A prototype model was constructed by inputting various technical information proposed by related laboratories. Especially operation flow which enables understanding of correlation between various analysis items, judgement criteria, technical data, and interfaces with others was constructed. Technical information data base and retrieval systems were studied. A Macintosh personal computer was selected for information shaping because of its excellent function, performance, operability, and software completeness.

  3. Satellite-Based Derivation of High-Resolution Forest Information Layers for Operational Forest Management

    Directory of Open Access Journals (Sweden)

    Johannes Stoffels

    2015-06-01

    Full Text Available A key factor for operational forest management and forest monitoring is the availability of up-to-date spatial information on the state of forest resources. Earth observation can provide valuable contributions to these information needs. The German federal state of Rhineland-Palatinate transferred its inherited forest information system to a new architecture that is better able to serve the needs of centralized inventory and planning services, down to the level of forest districts. During this process, a spatially adaptive classification approach was developed to derive high-resolution forest information layers (e.g., forest type, tree species distribution, development stages based on multi-temporal satellite data. This study covers the application of the developed approach to a regional scale (federal state level and the further adaptation of the design to meet the information needs of the state forest service. The results confirm that the operational requirements for mapping accuracy can, in principle, be fulfilled. However, the state-wide mapping experiment also revealed that the ability to meet the required level of accuracy is largely dependent on the availability of satellite observations within the optimum phenological time-windows.

  4. Office for Analysis and Evaluation of Operational Data 1990 annual report

    International Nuclear Information System (INIS)

    1991-07-01

    The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1990. The report is published in two separate parts. This document NUREG-1272, Vol. 5, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. NUREG-1272, Vol.5, No. 2, covers nonreactors and presents a review of the events and concerns during 1990 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. The reports contain a discussion of the Incident Investigation Team program and summarize the Incident Investigation Team and Augmented Inspection Team reports for that group of licensees. Each volume contains a list of the AEOD reports issued for 1980 through 1990. 9 figs., 8 tabs

  5. Informed consent: do information pamphlets improve post-operative risk-recall in patients undergoing total thyroidectomy: prospective randomized control study.

    Science.gov (United States)

    Alsaffar, Hussain; Wilson, Lindsay; Kamdar, Dev P; Sultanov, Faizullo; Enepekides, Danny; Higgins, Kevin M

    2016-02-13

    Informed consent consists of basic five elements: voluntarism, capacity, disclosure, understanding, and ultimate decision-making. Physician disclosure, patient understanding, and information retention are all essential in the doctor-patient relationship. This is inclusive of helping patients make and manage their decisions and expectations better and also to deal with any consequences and/or complications that arise. This study investigates whether giving patients procedure-specific handouts pre-operatively as part of the established informed consent process significantly improves overall risk-recall following surgery. These handouts outline the anticipated peri-operative risks and complications associated with total thyroidectomy, as well as the corrective measures to address complications. In addition, the influence of potential confounders affecting risk-recall, such as anxiety and pre-existing memory disturbance, are also examined. Consecutive adult (≥18 years old) patients undergoing total thyroidectomy at a single academic tertiary care referral centre are included. Participants are randomly assigned into either the experimental group (with pamphlets) or the control group by a computerized randomization system (Clinstat). All participants filled out a Hospital Anxiety and Depression Scale (HADS) and they are tested by the physician for short-term memory loss using the Memory Impairment Screen (MIS) exam. All patients are evaluated at one week post-operatively. The written recall questionnaire test is also administered during this clinical encounter. Forty-nine patients are included--25 of them receive verbal consent only, while another 24 patients received both verbal consent and patient education information pamphlets. The overall average of correct answers for each group was 83% and 80% in the control and intervention groups, respectively, with no statistically significant differences. There are also no statistically significant differences between the

  6. A Mapping Study on Cooperation between Information System Development and Operations

    NARCIS (Netherlands)

    Erich, Floris; Amrit, Chintan Amrit; Daneva, Maia; Jedlitschka, Andreas; Kuvaja, Pasi; Kuhrmann, Marco; Männistö, Tomi; Münch, Jürgen; Raatikainen, Mikko

    2014-01-01

    DevOps is a conceptual framework for reintegrating development and operations of Information Systems.We performed a Systematic Mapping Study to explore DevOps. 26 articles out of 139 were selected, studied and summarized. Based on this a concept table was constructed. We discovered that DevOps has

  7. 9 CFR 355.19 - Inspector to be informed when plant operates.

    Science.gov (United States)

    2010-01-01

    ... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFIED PRODUCTS FOR DOGS, CATS, AND OTHER CARNIVORA... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Inspector to be informed when plant operates. 355.19 Section 355.19 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT...

  8. Supporting the Maritime Information Dominance: Optimizing Tactical Network for Biometric Data Sharing in Maritime Interdiction Operations

    Science.gov (United States)

    2015-03-01

    biometric data collection. Capture role- player mock biometric data including finger prints, iris scans, and facial recognition photos. (MOC training...MARITIME INFORMATION DOMINANCE: OPTIMIZING TACTICAL NETWORK FOR BIOMETRIC DATA SHARING IN MARITIME INTERDICTION OPERATIONS by Adam R. Sinsel...MARITIME INFORMATION DOMINANCE: OPTIMIZING TACTICAL NETWORK FOR BIOMETRIC DATA SHARING IN MARITIME INTERDICTION OPERATIONS 6. AUTHOR(S) Adam R

  9. Cost Analysis In A Multi-Mission Operations Environment

    Science.gov (United States)

    Newhouse, M.; Felton, L.; Bornas, N.; Botts, D.; Roth, K.; Ijames, G.; Montgomery, P.

    2014-01-01

    Spacecraft control centers have evolved from dedicated, single-mission or single missiontype support to multi-mission, service-oriented support for operating a variety of mission types. At the same time, available money for projects is shrinking and competition for new missions is increasing. These factors drive the need for an accurate and flexible model to support estimating service costs for new or extended missions; the cost model in turn drives the need for an accurate and efficient approach to service cost analysis. The National Aeronautics and Space Administration (NASA) Huntsville Operations Support Center (HOSC) at Marshall Space Flight Center (MSFC) provides operations services to a variety of customers around the world. HOSC customers range from launch vehicle test flights; to International Space Station (ISS) payloads; to small, short duration missions; and has included long duration flagship missions. The HOSC recently completed a detailed analysis of service costs as part of the development of a complete service cost model. The cost analysis process required the team to address a number of issues. One of the primary issues involves the difficulty of reverse engineering individual mission costs in a highly efficient multimission environment, along with a related issue of the value of detailed metrics or data to the cost model versus the cost of obtaining accurate data. Another concern is the difficulty of balancing costs between missions of different types and size and extrapolating costs to different mission types. The cost analysis also had to address issues relating to providing shared, cloud-like services in a government environment, and then assigning an uncertainty or risk factor to cost estimates that are based on current technology, but will be executed using future technology. Finally the cost analysis needed to consider how to validate the resulting cost models taking into account the non-homogeneous nature of the available cost data and the

  10. Recommended radiological controls for tritium operations

    International Nuclear Information System (INIS)

    Mansfield, G.

    1992-01-01

    This informal report presents recommendations for an adequate radiological protection program for tritium operations. Topics include hazards analysis, facility design, personnel protection equipment, training, operational procedures, radiation monitoring, to include surface and airborne tritium contamination, and program management

  11. Dual ant colony operational modal analysis parameter estimation method

    Science.gov (United States)

    Sitarz, Piotr; Powałka, Bartosz

    2018-01-01

    Operational Modal Analysis (OMA) is a common technique used to examine the dynamic properties of a system. Contrary to experimental modal analysis, the input signal is generated in object ambient environment. Operational modal analysis mainly aims at determining the number of pole pairs and at estimating modal parameters. Many methods are used for parameter identification. Some methods operate in time while others in frequency domain. The former use correlation functions, the latter - spectral density functions. However, while some methods require the user to select poles from a stabilisation diagram, others try to automate the selection process. Dual ant colony operational modal analysis parameter estimation method (DAC-OMA) presents a new approach to the problem, avoiding issues involved in the stabilisation diagram. The presented algorithm is fully automated. It uses deterministic methods to define the interval of estimated parameters, thus reducing the problem to optimisation task which is conducted with dedicated software based on ant colony optimisation algorithm. The combination of deterministic methods restricting parameter intervals and artificial intelligence yields very good results, also for closely spaced modes and significantly varied mode shapes within one measurement point.

  12. Information Design for Synchronization and Co-ordination of Modern, Complex, Multi-National Operations

    Science.gov (United States)

    2011-06-01

    1 16th ICCRTS Information design for synchronization and co-ordination of modern, complex, multi- national operations “Collective C2 in...REPORT DATE JUN 2011 2. REPORT TYPE 3. DATES COVERED 00-00-2011 to 00-00-2011 4. TITLE AND SUBTITLE Information design for synchronization and co...at 11th ICCRTS) who emphasise that information needs to be designed, not merely found or catalogued, to achieve synchronizations and co-ordinations

  13. Alice and Bob meet Banach the interface of asymptotic geometric analysis and quantum information theory

    CERN Document Server

    Aubrun, Guillaume

    2017-01-01

    The quest to build a quantum computer is arguably one of the major scientific and technological challenges of the twenty-first century, and quantum information theory (QIT) provides the mathematical framework for that quest. Over the last dozen or so years, it has become clear that quantum information theory is closely linked to geometric functional analysis (Banach space theory, operator spaces, high-dimensional probability), a field also known as asymptotic geometric analysis (AGA). In a nutshell, asymptotic geometric analysis investigates quantitative properties of convex sets, or other geometric structures, and their approximate symmetries as the dimension becomes large. This makes it especially relevant to quantum theory, where systems consisting of just a few particles naturally lead to models whose dimension is in the thousands, or even in the billions. Alice and Bob Meet Banach is aimed at multiple audiences connected through their interest in the interface of QIT and AGA: at quantum information resea...

  14. Nursing Leaders' Satisfaction with Information Systems in the Day-to-Day Operations Management in Hospital Units.

    Science.gov (United States)

    Peltonen, Laura-Maria; Junttila, Kristiina; Salanterä, Sanna

    2018-01-01

    Information usage in the day-to-day operations management of hospital units is complex due to numerous information systems in use. The aim of this study was to describe and compare nurse leaders' satisfaction with information systems used in the day-to-day operations management in hospital units. The design was a cross-sectional survey with five questions rated from one (disagree) to five (fully agree). The response rate was 65 % (n = 453). Respondents reported fair satisfaction with how information systems support decision-making (median 4, IQR 3-4) and improve ease of access to information (median 4, IQR 3-4). However, respondents were less satisfied with how systems improve speed of access to information (median 3, IQR 3-4). Nor did respondents think that systems were developed for them (median 3, IQR 2-4). Respondents further reported needing numerous systems daily to support decision-making (median 4, IQR 3-5). A clear need for one system, which would gather important information for display was stated (median 5, IQR 4-5). Work experience, gender and time when overseeing the unit were associated with some aspects related to satisfaction. In conclusion, information system improvements are needed to better support the day-to-day operations management in hospital units.

  15. Lorentz-covariant reduced-density-operator theory for relativistic-quantum-information processing

    International Nuclear Information System (INIS)

    Ahn, Doyeol; Lee, Hyuk-jae; Hwang, Sung Woo

    2003-01-01

    In this paper, we derived a Lorentz-covariant quantum Liouville equation for the density operator which describes the relativistic-quantum-information processing from Tomonaga-Schwinger equation and an exact formal solution for the reduced density operator is obtained using the projector operator technique and the functional calculus. When all the members of the family of the hypersurfaces become flat hyperplanes, it is shown that our results agree with those of the nonrelativistic case, which is valid only in some specified reference frame. To show that our formulation can be applied to practical problems, we derived the polarization of the vacuum in quantum electrodynamics up to the second order. The formulation presented in this work is general and could be applied to related fields such as quantum electrodynamics and relativistic statistical mechanics

  16. MANGO – Modal Analysis for Grid Operation: A Method for Damping Improvement through Operating Point Adjustment

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Zhenyu; Zhou, Ning; Tuffner, Francis K.; Chen, Yousu; Trudnowski, Daniel J.; Diao, Ruisheng; Fuller, Jason C.; Mittelstadt, William A.; Hauer, John F.; Dagle, Jeffery E.

    2010-10-18

    Small signal stability problems are one of the major threats to grid stability and reliability in the U.S. power grid. An undamped mode can cause large-amplitude oscillations and may result in system breakups and large-scale blackouts. There have been several incidents of system-wide oscillations. Of those incidents, the most notable is the August 10, 1996 western system breakup, a result of undamped system-wide oscillations. Significant efforts have been devoted to monitoring system oscillatory behaviors from measurements in the past 20 years. The deployment of phasor measurement units (PMU) provides high-precision, time-synchronized data needed for detecting oscillation modes. Measurement-based modal analysis, also known as ModeMeter, uses real-time phasor measurements to identify system oscillation modes and their damping. Low damping indicates potential system stability issues. Modal analysis has been demonstrated with phasor measurements to have the capability of estimating system modes from both oscillation signals and ambient data. With more and more phasor measurements available and ModeMeter techniques maturing, there is yet a need for methods to bring modal analysis from monitoring to actions. The methods should be able to associate low damping with grid operating conditions, so operators or automated operation schemes can respond when low damping is observed. The work presented in this report aims to develop such a method and establish a Modal Analysis for Grid Operation (MANGO) procedure to aid grid operation decision making to increase inter-area modal damping. The procedure can provide operation suggestions (such as increasing generation or decreasing load) for mitigating inter-area oscillations.

  17. 76 FR 63941 - Agency Information Collection Activities: Business Transformation-Automated Integrated Operating...

    Science.gov (United States)

    2011-10-14

    ... Activities: Business Transformation--Automated Integrated Operating Environment (IOE), New Information... Internet by federal agencies through efforts like USCIS' Business Transformation initiative. The USCIS ELIS... the USCIS Business Transformation initiative and wizard technology. The supporting statement can be...

  18. 76 FR 17145 - Agency Information Collection Activities: Business Transformation-Automated Integrated Operating...

    Science.gov (United States)

    2011-03-28

    ... Collection Activities: Business Transformation--Automated Integrated Operating Environment (IOE), New... through efforts like USCIS' Business Transformation initiative. The IOE will be implemented by USCIS and... information collection. (2) Title of the Form/Collection: Business Transformation-- Automated Integrated...

  19. 42 CFR 433.116 - FFP for operation of mechanized claims processing and information retrieval systems.

    Science.gov (United States)

    2010-10-01

    ... and information retrieval systems. 433.116 Section 433.116 Public Health CENTERS FOR MEDICARE... FISCAL ADMINISTRATION Mechanized Claims Processing and Information Retrieval Systems § 433.116 FFP for operation of mechanized claims processing and information retrieval systems. (a) Subject to 42 CFR 433.113(c...

  20. Using crowdsourced web content for informing water systems operations in snow-dominated catchments

    Science.gov (United States)

    Giuliani, Matteo; Castelletti, Andrea; Fedorov, Roman; Fraternali, Piero

    2016-12-01

    Snow is a key component of the hydrologic cycle in many regions of the world. Despite recent advances in environmental monitoring that are making a wide range of data available, continuous snow monitoring systems that can collect data at high spatial and temporal resolution are not well established yet, especially in inaccessible high-latitude or mountainous regions. The unprecedented availability of user-generated data on the web is opening new opportunities for enhancing real-time monitoring and modeling of environmental systems based on data that are public, low-cost, and spatiotemporally dense. In this paper, we contribute a novel crowdsourcing procedure for extracting snow-related information from public web images, either produced by users or generated by touristic webcams. A fully automated process fetches mountain images from multiple sources, identifies the peaks present therein, and estimates virtual snow indexes representing a proxy of the snow-covered area. Our procedure has the potential for complementing traditional snow-related information, minimizing costs and efforts for obtaining the virtual snow indexes and, at the same time, maximizing the portability of the procedure to several locations where such public images are available. The operational value of the obtained virtual snow indexes is assessed for a real-world water-management problem, the regulation of Lake Como, where we use these indexes for informing the daily operations of the lake. Numerical results show that such information is effective in extending the anticipation capacity of the lake operations, ultimately improving the system performance.

  1. Contents operation center for 'mopera' information service; Mopera joho service muke contents un'ei center

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    'Mopera' information service is a mobile information service in which NTT Mobile Communications Network, Inc. offers information of various fields such as business and hobbies for the users of the portable telephone or PHS of the company. Toshiba Corp. started the contents operation center consistently performing from the preparation of contents to the management of a server for the above information service, making efforts in expanding the contents since the beginning of the service in the fall of 1998, and operating at present more than ten kinds of contents such as news, weather forecast, and stock information other than mobile 'Ekimae-Tanken Club' (adventure club in front of a station). Moreover, Toshiba takes it into consideration to build a system aiming at a stable operation like a duplex operation of a server, 24-hour automatic surveillance, etc., continuously providing highly reliable services. (translated by NEDO)

  2. Man machine interaction for operator information systems : a general purpose display package on PC/AT

    International Nuclear Information System (INIS)

    Chandra, A.K.; Dubey, B.P.; Deshpande, S.V.; Vaidya, U.W.; Khandekar, A.B.

    1991-01-01

    Several operator information systems for nuclear plants have been developed at Reactor Control Division of BARC and these have involved extensive operator interaction to extract the maximum information from the systems. Each of these systems used a different scheme for operator interaction. A composite package has now been developed on PC/AT with EGA/VGA for use with any system to obviate the necessity to develop new software for each project. This permits information to be displayed in various formats viz. trend and history curves, tabular data, bar graphs and core matrix (both for 235 and 500 MWe cores). It also allows data to be printed and plotted using multi colour plotter. This package thus integrates all the features of the earlier systems. It also integrates the operator interaction scheme. It uses window based pull down menus to select parameters to be fed into a particular display format. Within any display format the operator has significant flexibility to modify the selected parameters using context dependent soft keys. The package also allows data to be retrieved in machine readable form. This report describes the various user friendly functions implemented and also the design of the system software. (author). 1 tab., 10 fig., 3 refs

  3. Online channel operation mode: Game theoretical analysis from the supply chain power structure

    Directory of Open Access Journals (Sweden)

    Song Huang

    2015-11-01

    Full Text Available Purpose: Dual-channels have been widely used in practice, and the pricing decisions and the online channel operation mode choice have been the core problems in dual-channel supply chain management. This paper focuses on the online channel operation mode choice from the supply chain power structures based on game theoretical analysis. Design/methodology/approach: This paper utilizes three kinds of game theoretical models to analyze the impact of supply chain power structures on the optimal pricing and online channel operation mode choice. Findings: Results derived in this paper indicate that when the self-price elasticity is large, the power structures have no direct impact on the decisions. However, when the self-price elasticity is small and customers’ preference for the online channel is low, then in the MS market, it is better for the retailer to operate the online channel, while in the RS market or in the VN market, it is better for the manufacturer to operate the online channel. Research limitations/implications: In this paper, we do not consider stochastic demand and asymmetric information, which may not well suit the reality. Originality/value: This paper provides a different perspective to analyze the impact of supply chain power structures on the pricing decisions and online channel operation mode choice. The comparison of these two online channel operation modes in this paper is also a unique point.

  4. Analysis and evaluation of operational data. Annual report, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The United States Nuclear Regulatory Commission`s Office for Analysis and Evaluation of Operational Data (AEOD) has published reports of its activities since 1984. The first report covered January through June of 1984, and the second report covered July through December of 1984. After those first two semiannual reports, AEOD published annual reports of its activities from 1985 through 1993. Beginning with report for 1986, AEOD Annual Reports have been published as NUREG-1272. Beginning with the report for 1987, NUREG-1272 has been published in two parts, No. 1 covering power reactors and No. 2 covering nonreactors (changed to `nuclear materials` with the 1993 report). AEOD changed its annual report from a calendar year (CY) to a fiscal year report, and added part No. 3 covering technical training, beginning with the combined Annual Report for CY 1994 and fiscal year 1995, NUREG-1272, Vol. 9, Nos. 1-3. This report, NUREG-1272, Vol. 10, No. 2, covers nuclear materials and presents a review of the events and concerns associated with the use of licensed material in applications other than power reactores. NUREG-1272, Vol. 10, No. 1, covers power reactors and presents an overview of the fiscal year 1996 operating experience of the nuclear power industry from the NRC perspective. NUREG-1272, Vol. 10, No. 3, covers technical training and presents the activities of the Technical Training Center in support of the NRC`s mission. Throughout these reports, whenever information is presented for a calendar year, it is so designated. Fiscal year information is designated by the four digits of the fiscal year.

  5. Investigation of relation between operator's mental workload and information flow in accident diagnosis tasks of nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Chang Hoon; Kim, Jong Hyun; Seong, Poong Hyun [KAIST, Taejon (Korea, Republic of)

    2004-07-01

    In the main control room (MCR) of a nuclear power plant (NPP), there are lots of dynamic information sources for MCR operator's situation awareness. As the human-machine interface in MCR is advanced, operator's information acquisition, information gathering and decision-making is becoming an important part to maintain the effective and safe operation of NPPs. Diagnostic task in complex and huge systems like NPP is the most difficult and mental effort-demanding for operators. This research investigates the relation between operator's mental workload and information flow in accident diagnosis tasks. The amount of information flow is quantified, using information flow model and Conant's model, a kind of information theory. For the mental workload measure, eye blink rate, blink duration, fixation time, number of fixation, and gaze direction are measured during accident diagnosis tasks. Subjective methods such as NASA-Task Load Index (NASA-TLX) and Modified Cooper-Harper (MCH) method are also used in the experiment. It is shown that the operator's mental workload has significant relation to information flow of diagnosis task. It makes possible to predict the mental workload through the quantity of the information flow of a system.

  6. Vibration analysis of a hydro generator for different operating regimes

    Science.gov (United States)

    Haţiegan, C.; Pădureanu, I.; Jurcu, M.; Nedeloni, M. D.; Hamat, C. O.; Chioncel, C. P.; Trocaru, S.; Vasile, O.; Bădescu, O.; Micliuc, D.; (Filip Nedeloni, L.; Băra, A.; (Barboni Haţiegan, L.

    2017-01-01

    Based on experimental measurements, this paper presents the vibration analysis of a hydro generator that equips a Kaplan hydraulic turbine of a Hydropower plant in Romania. This analysis means vibrations measurement to different operating regimes of the hydro generator respectively before installing it and into operation, namely putting off load mode (unexcited and excited) respectively putting on load mode. By comparing, through the experimental results obtained before and after the operation of hydro aggregates are observed vibrations improvements.

  7. Ergonomic design in the operating room: information technologies

    Science.gov (United States)

    Morita, Mark M.; Ratib, Osman

    2005-04-01

    The ergonomic design in the Surgical OR of information technology systems has been and continues to be a large problem. Numerous disparate information systems with unique hardware and display configurations create an environment similar to the chaotic environments of air traffic control. Patient information systems tend to show all available statistics making it difficult to isolate the key, relevant vitals for the patient. Interactions in this sterile environment are still being done with the traditional keyboard and mouse designed for cubicle office workflows. This presentation will address the shortcomings of the current design paradigm in the Surgical OR that relate to Information Technology systems. It will offer a perspective that addresses the ergonomic deficiencies and predicts how future technological innovations will integrate into this vision. Part of this vision includes a Surgical OR PACS prototype, developed by GE Healthcare Technologies, that addresses ergonomic challenges of PACS in the OR that include lack of portability, sterile field integrity, and UI targeted for diagnostic radiologists. GWindows (gesture control) developed by Microsoft Research and Voice command will allow for the surgeons to navigate and review diagnostic imagery without using the conventional keyboard and mouse that disrupt the integrity of the sterile field. This prototype also demonstrates how a wireless, battery powered, self contained mobile PACS workstation can be optimally positioned for a surgeon to reference images during an intervention as opposed to the current pre-operative review. Lessons learned from the creation of the Surgical OR PACS Prototype have demonstrated that PACS alone is not the end all solution in the OR. Integration of other disparate information systems and presentation of this information in simple, easy to navigate information packets will enable smoother interactions for the surgeons and other healthcare professionals in the OR. More intuitive

  8. Risk assessment during operating self-propelled lifting jib cranes in conditions of insufficient information

    Directory of Open Access Journals (Sweden)

    Lagerev A.V.

    2017-06-01

    Full Text Available Presents the results of statistical analyses identified by the expert diagnostics of defects of the self-propelled lifting jib cranes, spent a normative term of exploitation. The greatest number of defects associated with the destruction and dete-rioration of structural elements, the occurrence of fatigue cracks and a violation of the conditions of operation of the equipment. The greatest number of defects occurs in the hydraulic system of cranes, the rope-block system, and rarely in steel structures. To conduct risk analysis of self-propelled jib cranes in case of insufficient information, proposed the method of expert estimations. It allows to assess the impact of potential defects on self-propelled jib cranes on the value of the economic damage of the crane and moving cargo and the value of the traumatic exposure on men. The proposed list of possible defects self-propelled lifting jib cranes and a checklist of questions about the degree of influence of these defects. Proposed calculated dependences to the approximate calculation of the magnitude of technical risk in the opera-tion of self-propelled jib cranes. The results of statistical analysis of expert estimations for each possible defect and per-formed their ranking in terms of impact on the magnitude of the economic damage of the crane and moving loads, the value of the traumatic exposure. Was calculated the value of technical risk for the surveyed taps.

  9. Thermal and Evolved Gas Analysis of Calcite Under Reduced Operating Pressures: Implications for the 2011 MSL Sample Analysis at Mars (SAM) Instrument

    Science.gov (United States)

    Lauer, H. V. Jr.; Ming, D. W.; Sutter, B.; Mahaffy, P. R.

    2010-01-01

    The Mars Science Laboratory (MSL) is scheduled for launch in 2011. The science objectives for MSL are to assess the past or present biological potential, to characterize the geology, and to investigate other planetary processes that influence habitability at the landing site. The Sample Analysis at Mars (SAM) is a key instrument on the MSL payload that will explore the potential habitability at the landing site [1]. In addition to searching for organic compounds, SAM will have the capability to characterized evolved gases as a function of increasing temperature and provide information on the mineralogy of volatile-bearing phases such as carbonates, sulfates, phyllosilicates, and Fe-oxyhydroxides. The operating conditions in SAM ovens will be maintained at 30 mb pressure with a He carrier gas flowing at 1 sccm. We have previously characterized the thermal and evolved gas behaviors of volatile-bearing species under reduced pressure conditions that simulated operating conditions of the Thermal and Evolved Gas Analyzer (TEGA) that was onboard the 2007 Mars Phoenix Scout Mission [e.g., 2-8]. TEGA ovens operated at 12 mb pressure with a N2 carrier gas flowing at 0.04 sccm. Another key difference between SAM and TEGA is that TEGA was able to perform differential scanning calorimetry whereas SAM only has a pyrolysis oven. The operating conditions for TEGA and SAM have several key parameter differences including operating pressure (12 vs 30 mb), carrier gas (N2 vs. He), and carrier gas flow rate (0.04 vs 1 sccm). The objectives of this study are to characterize the thermal and evolved gas analysis of calcite under SAM operating conditions and then compare it to calcite thermal and evolved gas analysis under TEGA operating conditions.

  10. [Design of an anesthesia and micro-environment information management system in mobile operating room].

    Science.gov (United States)

    Wang, Xianwen; Liu, Zhiguo; Zhang, Wenchang; Wu, Qingfu; Tan, Shulin

    2013-08-01

    We have designed a mobile operating room information management system. The system is composed of a client and a server. A client, consisting of a PC, medical equipments, PLC and sensors, provides the acquisition and processing of anesthesia and micro-environment data. A server is a powerful computer that stores the data of the system. The client gathers the medical device data by using the C/S mode, and analyzes the obtained HL7 messages through the class library call. The client collects the micro-environment information with PLC, and finishes the data reading with the OPC technology. Experiment results showed that the designed system could manage the patient anesthesia and micro-environment information well, and improve the efficiency of the doctors' works and the digital level of the mobile operating room.

  11. Social Network Analysis and informal trade

    DEFF Research Database (Denmark)

    Walther, Olivier

    networks can be applied to better understand informal trade in developing countries, with a particular focus on Africa. The paper starts by discussing some of the fundamental concepts developed by social network analysis. Through a number of case studies, we show how social network analysis can...... illuminate the relevant causes of social patterns, the impact of social ties on economic performance, the diffusion of resources and information, and the exercise of power. The paper then examines some of the methodological challenges of social network analysis and how it can be combined with other...... approaches. The paper finally highlights some of the applications of social network analysis and their implications for trade policies....

  12. ANALYSIS OF AVAILABILITY AND RELIABILITY IN RHIC OPERATIONS

    International Nuclear Information System (INIS)

    PILAT, F.; INGRASSIA, P.; MICHNOFF, R.

    2006-01-01

    RHIC has been successfully operated for 5 years as a collider for different species, ranging from heavy ions including gold and copper, to polarized protons. We present a critical analysis of reliability data for RHIC that not only identifies the principal factors limiting availability but also evaluates critical choices at design times and assess their impact on present machine performance. RHIC availability data are typical when compared to similar high-energy colliders. The critical analysis of operations data is the basis for studies and plans to improve RHIC machine availability beyond the 50-60% typical of high-energy colliders

  13. Transient analysis of house load operation for LNPP

    International Nuclear Information System (INIS)

    Shi Junying; Zheng Bin

    2000-01-01

    The author analysis the transient of house load operation for Ling'ao Nuclear Power Plant by using the methods of dynamic simulation and closed loops of primary and secondary system. The transient of house load operation from 100% FP is the most severe that can occur on the unit in normal operation because it causes immediately shedding of 95% of turbine load and requires the unit to operate steadily at reduced power. The results show that the transient can be successful both at beginning of core life and manual house load operation. However, more attentions must be paid to automatic house load operation caused by grid fault at toward end of core life because the success of the transient could be threatened by the actuation of the protection of high flux and high flux rate

  14. Analysis of WWER-440 fuel performance under normal operating conditions

    Energy Technology Data Exchange (ETDEWEB)

    Gunduz, Oe; Koese, S; Akbas, T [Atomenerjisi Komisyonu, Ankara (Turkey); Colak, Ue [Ankara Nuclear Research and Training Center (Turkey)

    1994-12-31

    FRAPCON-2 code originally developed for LWR fuel behaviour simulation is used to analyse the WWER-440 fuel rod behaviour at normal operational conditions. The code is capable of utilizing different models for mechanical analysis and gas release calculations. Heat transfer calculations are accomplished through a collocation technique by the method of weighted residuals. Temperature and burnup element properties are evaluated using MATPRO package. As the material properties of Zr-1%Nb used as cladding in WWER-440s are not provided in the code, Zircaloy-4 is used as a substitute for Zr-1%Nb. Mac-Donald-Weisman model is used for gas release calculation. FRACAS-1 and FRACAS-2 models are used in the mechanical calculations. It is assumed that the reactor was operated for 920 days (three consecutive cycles), the burnup being 42000 Mwd/t U. Results of the fuel rod behaviour analysis are given for three axial nodes: bottom node, central node and top node. The variations of the following characteristic fuel rod parameters are studied through the prescribed power history: unmoved gap thickness, gap heat transfer coefficient, fuel axial elongation, cladding axial elongation, fuel centerline temperature and ZrO-thickness at cladding surface. The value of each parameter is calculated as a function of the effective power days for the three nodes by using FRACAS-1 and FRACAS-2 codes for comparison.The results show that calculations with deformable pellet approximation with FRACAS-II model could provide better information for the behaviour of a typical fuel rod. Calculations indicate that fuel rod failure is not observed during the operation. All fuel rod parameters investigated are found to be within the safety limits. It is concluded, however, that for better assessment of reactor safety these calculations should be extended for transient conditions such as LOCA. 1 tab., 10 figs., 4 refs.

  15. Risk-based decision analysis for groundwater operable units

    International Nuclear Information System (INIS)

    Chiaramonte, G.R.

    1995-01-01

    This document proposes a streamlined approach and methodology for performing risk assessment in support of interim remedial measure (IRM) decisions involving the remediation of contaminated groundwater on the Hanford Site. This methodology, referred to as ''risk-based decision analysis,'' also supports the specification of target cleanup volumes and provides a basis for design and operation of the groundwater remedies. The risk-based decision analysis can be completed within a short time frame and concisely documented. The risk-based decision analysis is more versatile than the qualitative risk assessment (QRA), because it not only supports the need for IRMs, but also provides criteria for defining the success of the IRMs and provides the risk-basis for decisions on final remedies. For these reasons, it is proposed that, for groundwater operable units, the risk-based decision analysis should replace the more elaborate, costly, and time-consuming QRA

  16. Risk-informed importance analysis of in-service testing components for Ulchin units 3 and 4

    International Nuclear Information System (INIS)

    Kang, D. I.; Kim, K. Y.; Ha, J. J.

    2001-01-01

    In this paper, we perform risk-informed importance analysis of in-service tesing (IST) components for Ulchin Units 3 and 4. The importance analysis using PSA is performed through Level 1 internal and external, shutdown/low power operation, and Level 2 internal PSA. The sensitivity analysis is also performed. For the components not modeled in PSA logic, we develop and apply a new integrated importance analysis method. The importance analysis results for IST valves show that 167 (26.55%) of 629 IST valves are HSSCs and 462 (73.45%) are LSSCs. The importance analysis results for IST pumps show that 28 (70%) of 40 IST pumps are HSSCs and 12 (30%) are KSSCs

  17. Q-Analysis of Inter-Ethnic Relationships can Support Information Operations

    National Research Council Canada - National Science Library

    Woodcock, Alexander E; Heath, James E

    1999-01-01

    This paper reports on the use of Q-analysis to study the degree of inter-ethnic linkages among the Serbs, Croats, and Muslims in Bosnia-Herzegovina as reflected in the results of public opinion poll...

  18. [The meaning of autonomy in Chinese culture: obtaining informed consent for operation].

    Science.gov (United States)

    Lin, Mei-Ling; Wu, Jo Yung-Wei; Huang, Mei-Chih

    2008-10-01

    The purpose of gaining the patient's informed consent is ethical, lying in respect for his or her autonomy, and such consent forms the foundation for the performance of clinical medical treatment. In order to respect the patient's autonomy, for example, during decisions about operations, doctors have the obligation to clearly explain that patient's medical condition to him/her. A thorough briefing should be given prior to the obtaining of the patients' consent. In fulfillment of their duties as medical professionals, both doctors and nurses should be involved in clinically informing patients as well as in obtaining their signature for operation and anesthesia. Although informing patients about their physical state is not the responsibility of nurses, it remains absolutely necessary for nurses to understand how people in Asian cultures understand autonomy. This paper begins with a discussion of autonomy in ethics, and then outlines the differences between the Eastern and Western concepts of autonomy, before discussing the obtaining of the signature of consent, a process performed by the nursing staff during clinical treatment, and resulting in the provision of such signatures by patients with the legal capacity to provide them.

  19. Hybrid Information Flow Analysis for Programs with Arrays

    Directory of Open Access Journals (Sweden)

    Gergö Barany

    2016-07-01

    Full Text Available Information flow analysis checks whether certain pieces of (confidential data may affect the results of computations in unwanted ways and thus leak information. Dynamic information flow analysis adds instrumentation code to the target software to track flows at run time and raise alarms if a flow policy is violated; hybrid analyses combine this with preliminary static analysis. Using a subset of C as the target language, we extend previous work on hybrid information flow analysis that handled pointers to scalars. Our extended formulation handles arrays, pointers to array elements, and pointer arithmetic. Information flow through arrays of pointers is tracked precisely while arrays of non-pointer types are summarized efficiently. A prototype of our approach is implemented using the Frama-C program analysis and transformation framework. Work on a full machine-checked proof of the correctness of our approach using Isabelle/HOL is well underway; we present the existing parts and sketch the rest of the correctness argument.

  20. Experimental study on the operators' cognitive behavior analysis for the plant anomaly diagnosis

    International Nuclear Information System (INIS)

    Takahashi, Makoto; Kubo, Osamu; Yasuta, Akira

    1996-01-01

    In this paper, a method of human cognitive state estimation based on physiological measures has been applied to the analysis of cognitive behavior during anomaly diagnosis observed with nuclear power plant simulator. This method has also been combined with the conventional experimental protocol such as operational sequence and questionnaire results. The simulator experiments have been performed using plant experts and the results demonstrate that the cognitive state estimation method can be an effective way for understanding cognitive behavior during the anomaly diagnosis of the nuclear power plant. It has also been shown from the results that the combined use of the human cognitive state estimation and the conventional experimental protocol can provide effective information in decreasing the ambiguity of the analysis results. (author)

  1. The integrated business information system: using automation to monitor cost-effectiveness of park operations

    Science.gov (United States)

    Dick Stanley; Bruce Jackson

    1995-01-01

    The cost-effectiveness of park operations is often neglected because information is laborious to compile. The information, however, is critical if we are to derive maximum benefit from scarce resources. This paper describes an automated system for calculating cost-effectiveness ratios with minimum effort using data from existing data bases.

  2. Expert system for operational personnel support during power unit operation control in regulation range

    International Nuclear Information System (INIS)

    Yanitskij, V.A.

    1992-01-01

    The problems met when developing the systems for NPP operator support in the process of power unit operation are considered. The expert system for NPP personnel intelligent support combining the properties belonging to the artificial intelligence systems including selection of the analysis method taking into account the concrete technological situation and capability of application of algothmic calculations of the equipment characteristics using the information accumulated during the system development, erection and operation is described

  3. Use of PSA for the analysis of operational events in nuclear power plants

    International Nuclear Information System (INIS)

    Hulsmans, M.

    2006-01-01

    An operational event is a safety-relevant incident that occurred in an industrial installation like a nuclear power plant (NPP). The probabilistic approach to event analysis focuses on the potential consequences of an operational event. Within its scope of application, it provides a quantitative assessment of the risk significance of this event (and similar events): it calculates the risk increase induced by the event. Such analyses may result in a more objective and a more accurate event severity measure than those provided by commonly used qualitative methods. Probabilistic event analysis complements the traditional event analysis approaches that are oriented towards the understanding of the (root) causes of an event. In practice, risk-based precursor analysis consists of the mapping of an operational event on a risk model of the installation, such as a probabilistic safety analysis (PSA) model. Precursor analyses result in an objective risk ranking of safety-significant events, called accident precursors. An unexpectedly high (or low) risk increase value is in itself already an important finding. This assessment also yields a lot of information on the structure of the risk, since the underlying dominant factors can easily be determined. Relevant 'what if' studies on similar events and conditions can be identified and performed (which is generally not considered in conventional event analysis), with the potential to yield even broader findings. The findings of such a structured assessment can be used for other purposes than merely risk ranking. The operational experience feedback process can be improved by helping to identify design measures and operational practices in order to prevent re-occurrence or in order to mitigate future consequences, and even to evaluate their expected effectiveness, contributing to the validation and prioritization of corrective measures. Confirmed and re-occurring precursors with correlated characteristics may point out opportunities

  4. Operation environment construction of geological information database for high level radioactive waste geological disposal

    International Nuclear Information System (INIS)

    Wang Peng; Gao Min; Huang Shutao; Wang Shuhong; Zhao Yongan

    2014-01-01

    To fulfill the requirements of data storage and management in HLW geological disposal, a targeted construction method for data operation environment was proposed in this paper. The geological information database operation environment constructed by this method has its unique features. And it also will be the important support for HLW geological disposal project and management. (authors)

  5. Joint Intelligence Operations Center (JIOC) Baseline Business Process Model & Capabilities Evaluation Methodology

    Science.gov (United States)

    2012-03-01

    Targeting Review Board OPLAN Operations Plan OPORD Operations Order OPSIT Operational Situation OSINT Open Source Intelligence OV...Analysis Evaluate FLTREPs MISREPs Unit Assign Assets Feedback Asset Shortfalls Multi-Int Collection Political & Embasy Law Enforcement HUMINT OSINT ...Embassy Information OSINT Manage Theater HUMINT Law Enforcement Collection Sort Requests Platform Information Agency Information M-I Collect

  6. Theoretical foundations of functional data analysis, with an introduction to linear operators

    CERN Document Server

    Hsing, Tailen

    2015-01-01

    Theoretical Foundations of Functional Data Analysis, with an Introduction to Linear Operators provides a uniquely broad compendium of the key mathematical concepts and results that are relevant for the theoretical development of functional data analysis (FDA).The self-contained treatment of selected topics of functional analysis and operator theory includes reproducing kernel Hilbert spaces, singular value decomposition of compact operators on Hilbert spaces and perturbation theory for both self-adjoint and non self-adjoint operators. The probabilistic foundation for FDA is described from the

  7. Technical Requirements Analysis and Control Systems (TRACS) Initial Operating Capability (IOC) documentation

    Science.gov (United States)

    Hammond, Dana P.

    1991-01-01

    The Technical Requirements Analysis and Control Systems (TRACS) software package is described. TRACS offers supplemental tools for the analysis, control, and interchange of project requirements. This package provides the fundamental capability to analyze and control requirements, serves a focal point for project requirements, and integrates a system that supports efficient and consistent operations. TRACS uses relational data base technology (ORACLE) in a stand alone or in a distributed environment that can be used to coordinate the activities required to support a project through its entire life cycle. TRACS uses a set of keyword and mouse driven screens (HyperCard) which imposes adherence through a controlled user interface. The user interface provides an interactive capability to interrogate the data base and to display or print project requirement information. TRACS has a limited report capability, but can be extended with PostScript conventions.

  8. ANALYSIS OF TRAIN SHEET IN THE INFORMATION SYSTEM OF JSC «UKRZALIZNYTSIA»: PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    S. M. Ovcharenko

    2016-04-01

    Full Text Available Purpose. The system of train sheet analysis (TSA in the information system of JSC «Ukrzaliznytsia» provides work with passenger and suburban trains and has considerable potential. Therefore it is necessary to establish the prospects of development of the system. Methodology. Departments’ setup and the train delay causes should be carried out at every station and span, where such delays took place. This requires the fixation of condition deviations of infrastructure from normal and other adverse factors. In the sector of freight transportations the train schedule analysis is insufficient, since this analysis does not account for deviations from the terms of delivery. Therefore it also is necessary to analyze the delivery graphs. The basis for monitoring the cargo delivery is the method of control time points (CTP of technological operations performed with cargo at railway stations. On the basis of CTP to assess the quality of the transport process one should calculate the values of the analysis of cargo delivery schedule (performance level of the cargo delivery schedule, the coefficient of ahead of schedule/delay delivery. Findings. The article proposes to develop the system TSA using the input and display of the train delay causes on-line by transportation service employees, expansion of statistical databases and processing of the input delay causes during its calculation train sheet analysis of freight trains and quality assessment of the delivery schedule fulfillment. It is also appropriate before the new operator companies had appeared to make changes in the instructions TSCHU-TSD-0002 on the list of departments, which include delayed trains, by adding «the department» «The fault of operator companies» and corresponding causes of delays. Originality. The scheme of automated TSA in the information system of JSC «Ukrzaliznytsia» was improved. The author proposes to determine the cargo delivery quality on the certain polygon using the

  9. Implementing and operating the Hanford Environmental Information System (HEIS)

    International Nuclear Information System (INIS)

    Cowley, P.J.; Schwab, M.R.; Fox, R.D.

    1994-03-01

    In the process of performing environmental restoration at the 560-square mile Hanford Site in southeastern Washington State, vast amounts of scientific and technical data are being generated from sampling taking place all over the Site. This paper provides an overview of the lessons we have learned in designing, implementing, and putting into operation a computerized system named the Hanford Environmental Information System (HEIS), which is being used to manage the Site's environmental characterization sampling data. Topics discussed in this paper include helping the Site adapt to a data management culture, the advantages of electronic data over paper data, issues of data validation and defensibility, being a resource to the user community (including the regulatory community), managing and tracking data changes, integrating data from multiple programs, providing configuration control for data and software, getting priorities for software development, and developing a baseline for on-going funding to maintain the infrastructure for the information system

  10. Electronic Warfare (EW) Historical Perspectives and Its Relationship to Information Operations (IO) - Considerations for Turkey

    Science.gov (United States)

    2006-09-01

    Information Operations IW Information Warfare JDAM Joint Direct Attack Munition JRFL Joint Restricted Frequency List JSTARS Joint...through the preparation of the joint restricted frequency list (JRFL), which includes taboo, guarded and protected frequencies. The EC-130H Compass Call

  11. From Uas Data Acquisition to Actionable Information - how AN End-To Solution Helps Oil Palm Plantation Operators to Perform a More Sustainable Plantation Management

    Science.gov (United States)

    Hoffmann, C.; Weise, C.; Koch, T.; Pauly, K.

    2016-06-01

    Palm oil represents the most efficient oilseed crop in the world but the production of palm oil involves plantation operations in one of the most fragile environments - the tropical lowlands. Deforestation, the drying-out of swampy lowlands and chemical fertilizers lead to environmental problems that are putting pressure on this industry. Unmanned aircraft systems (UAS) together with latest photogrammetric processing and image analysis capabilities represent an emerging technology that was identified to be suitable to optimize oil palm plantation operations. This paper focuses on two key elements of a UAS-based oil palm monitoring system. The first is the accuracy of the acquired data that is necessary to achieve meaningful results in later analysis steps. High performance GNSS technology was utilized to achieve those accuracies while decreasing the demand for cost-intensive GCP measurements. The second key topic is the analysis of the resulting data in order to optimize plantation operations. By automatically extracting information on a block level as well as on a single-tree level, operators can utilize the developed application to increase their productivity. The research results describe how operators can successfully make use of a UAS-based solution together with the developed software solution to improve their efficiency in oil palm plantation management.

  12. Office for Analysis and Evaluation of Operational Data 1992 annual report: Power reactors

    International Nuclear Information System (INIS)

    1993-07-01

    The annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1992. The report is published in two separate parts. NUREG-1272, Vol. 7, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance, measures. The report also includes the principal findings and issues identified in AEOD studies over the past year, and summarizes information from such sources as licensee event report% diagnostic evaluations, and reports to the NRC's Operations Center. The reports contain a discussion of the Incident Investigation Team program and summarize the Incident Investigation Team and Augmented Inspection Team reports for that group of licensees. NUREG-1272, Vol. 7, No. 2, covers nonreactors and presents a review of the events and concerns during 1992 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Each volume contains a list of the AEOD reports issued for 1984--1992

  13. Mining and information: defining the need

    Energy Technology Data Exchange (ETDEWEB)

    Gray, J.; Peck, J. [AQUILA Mining Systems Ltd., Calgary, AB (Canada)

    1996-07-01

    Some of the current technologies at surface mining operations are discussed. The information system and communication system requirements needed to integrate these components are considered. A plan of a new mine that uses operating information, optimization through planning, monitoring, and locating systems, data processing and analysis, and integration of monitored data and information via the Total Mining System (TMS) is described. The TMS will allow integration of a network of stand-alone modules. There is an immediate requirement for setting standards in surface mining operations to prevent duplication of effort. 12 refs., 2 figs.

  14. Fragmented information management weakens sales operations; Fragmentiertes Informationsmanagement schwaecht den Vertrieb

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, Norbert; Gronwald, Heiko [Steria Mummert Consulting, Hamburg (Germany)

    2011-07-15

    Three quarters of all companies that operate in the energy market, which is to say in an increasingly competitive environment, are planning to invest in the long-term improvement of their business processes. Together with the possibilities of microsegmentation, the growing flow of data from smart metering creates opportunities to make differentiated offers to one's more lucrative customers. However this presupposes a high-performing information structure with a company-wide system of data management and traffic control. This system must be capable of processing large data quantities, making data accessible for evaluation and at the same time of collating data from different operating systems while maintaining data consistency. This spells lots of homework for energy supply companies.

  15. Thermal information regarding the cooldown and operation of liquid argon calorimeters

    International Nuclear Information System (INIS)

    Rucinski, R.A.; Cooper, W.E.; Dixon, K.D.; Krempetz, K.J.; Mulholland, G.T.; Primdahl, K.; Urbin, J.B.

    1993-07-01

    Three liquid argon calorimeters were cooled down and operated as part of the D-Zero detector at Fermi National Accelerator laboratory. The largest vessel contains 248 metric tons of uranium and copper plates and 19 kL (5000 gal.) of liquid argon. The other two vessels are mirror images, each containing 185 metric tons of uranium and stainless steel plates and 12.1 kL (3200 gal.) of liquid argon. The cool down was accomplished by convection heat transfer between boiling liquid nitrogen filled finned heat exchangers and argon gas inside the vessels. Information regarding the general internal geometry of the calorimeters, cool down, operation, and steady state heat loads will be presented

  16. Efficiency of crude oil markets: Evidences from informational entropy analysis

    International Nuclear Information System (INIS)

    Ortiz-Cruz, Alejandro; Rodriguez, Eduardo; Ibarra-Valdez, Carlos; Alvarez-Ramirez, Jose

    2012-01-01

    The role of crude oil as the main energy source for the global economic activity has motivated the discussion about the dynamics and causes of crude oil price changes. An accurate understanding of the issue should provide important guidelines for the design of optimal policies and government budget planning. Using daily data for WTI over the period January 1986–March 2011, we analyze the evolution of the informational complexity and efficiency for the crude oil market through multiscale entropy analysis. The results indicated that the crude oil market is informationally efficient over the scrutinized period except for two periods that correspond to the early 1990s and late 2000s US recessions. Overall, the results showed that deregulation has improved the operation of the market in the sense of making returns less predictable. On the other hand, there is some evidence that the probability of having a severe US economic recession increases as the informational efficiency decreases, which indicates that returns from crude oil markets are less uncertain during economic downturns. - Highlights: ► Entropy concepts are used to characterize crude oil prices. ► An index of market efficiency is introduced. ► Except for periods of economic recession, the crude oil market is informationally efficient.

  17. 75 FR 29568 - Extension of Agency Information Collection Activity Under OMB Review: Aircraft Operator Security

    Science.gov (United States)

    2010-05-26

    ... all passengers. The passenger watch list checks currently conducted by aircraft operators will soon be.... These programs require aircraft operators to maintain and update records to ensure compliance with... information collected to determine compliance with 49 CFR part 1544 and to ensure the freedom of movement for...

  18. Information diffused by the operator on the nuclear risk: which answer to stakeholders expectations?

    International Nuclear Information System (INIS)

    Plot-Vicard, Emmanuelle

    2010-01-01

    This research thesis addresses the practices of environmental information diffusion, and aims at identifying the possible discrepancies between information diffused by a company and the expectations of stakeholders, more particularly in the case of the nuclear risk. The first part presents the theoretical framework (notably the legitimacy theory) and determines the expectations of stakeholders as far as information on the nuclear risk is concerned. The second part describes and discusses information on nuclear risk diffused by operators in their annual reports, proposes an assessment of this information, and relates this assessment with the previous theoretical framework

  19. The development of the risk-based cost-benefit analysis framework for risk-informed regulation

    International Nuclear Information System (INIS)

    Yang, Z. A.; Hwang, M. J.; Lee, K. S.

    2001-01-01

    US NRC (Nuclear Regulatory Committee) introduces the Risk-informed Regulation (RIR) to allocate the resources of NRC effectively and to reduce the unnecessary burden of utilities. This approach inherently includes the cost-benefit analysis (CBA) concept. The CBA method has been widely used for many problems in order to support the decision making by analyzing the effectiveness of the proposed plan and/or activity in the aspect of cost and benefit. However, in general, the conventional CBA method does not use the information such as risk that is the essential element of RIR. So, we developed a revised CBA framework that incorporates the risk information in analyzing the cost and benefit of the regulatory and/or operational activities in nuclear industry

  20. Mathematical Analysis of Evolution, Information, and Complexity

    CERN Document Server

    Arendt, Wolfgang

    2009-01-01

    Mathematical Analysis of Evolution, Information, and Complexity deals with the analysis of evolution, information and complexity. The time evolution of systems or processes is a central question in science, this text covers a broad range of problems including diffusion processes, neuronal networks, quantum theory and cosmology. Bringing together a wide collection of research in mathematics, information theory, physics and other scientific and technical areas, this new title offers elementary and thus easily accessible introductions to the various fields of research addressed in the book.

  1. Transportation Big Data: Unbiased Analysis and Tools to Inform Sustainable Transportation Decisions

    Energy Technology Data Exchange (ETDEWEB)

    2016-06-01

    Today, transportation operation and energy systems data are generated at an unprecedented scale. The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) is the go-to source for expertise in providing data and analysis to inform industry and government transportation decision making. The lab's teams of data experts and engineers are mining and analyzing large sets of complex data -- or 'big data' -- to develop solutions that support the research, development, and deployment of market-ready technologies that reduce fuel consumption and greenhouse gas emissions.

  2. SIMULATION OF CARS ACCUMULATION PROCESSES FOR SOLVING TASKS OF OPERATIONAL PLANNING IN CONDITIONS OF INITIAL INFORMATION UNCERTAINTY

    Directory of Open Access Journals (Sweden)

    О. A. Tereshchenko

    2017-06-01

    Full Text Available Purpose. The article highlights development of the methodological basis for simulation the processes of cars accumulation in solving operational planning problems under conditions of initial information uncertainty for assessing the sustainability of the adopted planning scenario and calculating the associated technological risks. Methodology. The solution of the problem under investigation is based on the use of general scientific approaches, the apparatus of probability theory and the theory of fuzzy sets. To achieve this purpose, the factors influencing the entropy of operational plans are systematized. It is established that when planning the operational work of railway stations, sections and nodes, the most significant factors that cause uncertainty in the initial information are: a external conditions with respect to the railway ground in question, expressed by the uncertainty of the timing of cars arrivals; b external, hard-to-identify goals for the functioning of other participants in the logistics chain (primarily customers, expressed by the uncertainty of the completion time with the freight cars. These factors are suggested to be taken into account in automated planning through statistical analysis – the establishment and study of the remaining time (prediction errors. As a result, analytical dependencies are proposed for rational representation of the probability density functions of the time residual distribution in the form of point, piecewise-defined and continuous analytic models. The developed models of cars accumulation, the application of which depends on the identified states of the predicted incoming car flow to the accumulation system, are presented below. In addition, the last proposed model is a general case of models of accumulation processes with an arbitrary level of reliability of the initial information for any structure of the incoming flow of cars. In conclusion, a technique for estimating the results of

  3. Managing Returnable Containers Logistics - A Case Study Part I - Physical and Information Flow Analysis

    Directory of Open Access Journals (Sweden)

    Reza A. Maleki

    2011-05-01

    Full Text Available This case study paper is the result of a project conducted on behalf of a company, hereon referred to as Midwest Assembly and Manufacturing or MAAN. The company's operations include component manufacturing, painting, and assembling products. The company also purchases a relatively large percentage of components and major assemblies that are needed to support final assembly operations. MAAN uses its own returnable containers to transport purchased parts from suppliers. Due to poor tracking of the containers, the company has been experiencing lost containers and occasional production disruptions at its facility well as at the supplier sites. The objective of this project was to develop a proposal to enable MAAN to more effectively track and manage its returnable containers. The research activities in support of this project included the analysis and documentation of both the physical flow and the information flow associated with the containers as well as some of the technologies that can help with automatic identification and tracking of containers. The focal point of this paper is on a macro?level approach for the analysis of container and information flow within the logistics chain. A companion paper deals with several of the automatic identification technologies that have the potential to improve the management of MAAN's returnable containers.

  4. Information sharing guidebook for transportation management centers, emergency operations centers, and fusion centers

    Science.gov (United States)

    2010-06-01

    This guidebook provides an overview of the mission and functions of transportation management centers, emergency operations centers, and fusion centers. The guidebook focuses on the types of information these centers produce and manage and how the sh...

  5. Information sharing guidebook for transportation management centers, emergency operations centers, and fusion centers.

    Science.gov (United States)

    2010-06-01

    This guidebook provides an overview of the mission and functions of transportation management centers, emergency operations centers, and fusion centers. The guidebook focuses on the types of information these centers produce and manage and how the sh...

  6. Risk analysis of releases from accidents during mid-loop operation at Surry

    International Nuclear Information System (INIS)

    Jo, J.; Lin, C.C.; Nimnual, S.; Mubayi, V.; Neymotin, L.

    1992-11-01

    Studies and operating experience suggest that the risk of severe accidents during low power operation and/or shutdown (LP/S) conditions could be a significant fraction of the risk at full power operation. Two studies have begun at the Nuclear Regulatory Commission (NRC) to evaluate the severe accident progression from a risk perspective during these conditions: One at the Brookhaven National Laboratory for the Surry plant, a pressurized water reactor (PWR), and the other at the Sandia National Laboratories for the Grand Gulf plant, a boiling water reactor (BWR). Each of the studies consists of three linked, but distinct, components: a Level I probabilistic risk analysis (PRA) of the initiating events, systems analysis, and accident sequences leading to core damage; a Level 2/3 analysis of accident progression, fuel damage, releases, containment performance, source term and consequences-off-site and on-site; and a detailed Human Reliability Analysis (HRA) of actions relevant to plant conditions during LP/S operations. This paper summarizes the approach taken for the Level 2/3 analysis at Surry and provides preliminary results on the risk of releases and consequences for one plant operating state, mid-loop operation, during shutdown

  7. Improving machine operation management efficiency via improving the vehicle park structure and using the production operation information database

    Science.gov (United States)

    Koptev, V. Yu

    2017-02-01

    The work represents the results of studying basic interconnected criteria of separate equipment units of the transport network machines fleet, depending on production and mining factors to improve the transport systems management. Justifying the selection of a control system necessitates employing new methodologies and models, augmented with stability and transport flow criteria, accounting for mining work development dynamics on mining sites. A necessary condition is the accounting of technical and operating parameters related to vehicle operation. Modern open pit mining dispatching systems must include such kinds of the information database. An algorithm forming a machine fleet is presented based on multi-variation task solution in connection with defining reasonable operating features of a machine working as a part of a complex. Proposals cited in the work may apply to mining machines (drilling equipment, excavators) and construction equipment (bulldozers, cranes, pile-drivers), city transport and other types of production activities using machine fleet.

  8. Organizational structure and operation of defense/aerospace information centers in the United States of America

    Science.gov (United States)

    Sauter, H. E.; Lushina, L. N.

    1983-01-01

    U.S. Government aerospace and defense information centers are addressed. DTIC and NASA are described in terms of their history, operational authority, information services provided, user community, sources of information collected, efforts under way to improve services, and external agreements regarding the exchange of documents and/or data bases. Contents show how DTIC and NASA provide aerospace/defense information services in support of U.S. research and development efforts. In a general introduction, the importance of scientific and technical information and the need for information centers to acquire, handle, and disseminate it are stressed.

  9. Vortex information display system program description manual. [data acquisition from laser Doppler velocimeters and real time operation

    Science.gov (United States)

    Conway, R.; Matuck, G. N.; Roe, J. M.; Taylor, J.; Turner, A.

    1975-01-01

    A vortex information display system is described which provides flexible control through system-user interaction for collecting wing-tip-trailing vortex data, processing this data in real time, displaying the processed data, storing raw data on magnetic tape, and post processing raw data. The data is received from two asynchronous laser Doppler velocimeters (LDV's) and includes position, velocity, and intensity information. The raw data is written onto magnetic tape for permanent storage and is also processed in real time to locate vortices and plot their positions as a function of time. The interactive capability enables the user to make real time adjustments in processing data and provides a better definition of vortex behavior. Displaying the vortex information in real time produces a feedback capability to the LDV system operator allowing adjustments to be made in the collection of raw data. Both raw data and processing can be continually upgraded during flyby testing to improve vortex behavior studies. The post-analysis capability permits the analyst to perform in-depth studies of test data and to modify vortex behavior models to improve transport predictions.

  10. 33 CFR 157.150 - Crude Oil Washing Operations and Equipment Manual: Recording information after inspections.

    Science.gov (United States)

    2010-07-01

    ... Equipment Manual: Recording information after inspections. 157.150 Section 157.150 Navigation and Navigable... Vessels Inspections § 157.150 Crude Oil Washing Operations and Equipment Manual: Recording information... machines. (2) Revolutions, number of cycles, and length of cycles of each COW machine. (3) Pressure and...

  11. Information architecture. Volume 2, Part 1: Baseline analysis summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The Department of Energy (DOE) Information Architecture, Volume 2, Baseline Analysis, is a collaborative and logical next-step effort in the processes required to produce a Departmentwide information architecture. The baseline analysis serves a diverse audience of program management and technical personnel and provides an organized way to examine the Department`s existing or de facto information architecture. A companion document to Volume 1, The Foundations, it furnishes the rationale for establishing a Departmentwide information architecture. This volume, consisting of the Baseline Analysis Summary (part 1), Baseline Analysis (part 2), and Reference Data (part 3), is of interest to readers who wish to understand how the Department`s current information architecture technologies are employed. The analysis identifies how and where current technologies support business areas, programs, sites, and corporate systems.

  12. Natural Resource Information System. Volume 2: System operating procedures and instructions

    Science.gov (United States)

    1972-01-01

    A total computer software system description is provided for the prototype Natural Resource Information System designed to store, process, and display data of maximum usefulness to land management decision making. Program modules are described, as are the computer file design, file updating methods, digitizing process, and paper tape conversion to magnetic tape. Operating instructions for the system, data output, printed output, and graphic output are also discussed.

  13. Safety evaluation by living probabilistic safety assessment. Procedures and applications for planning of operational activities and analysis of operating experience

    International Nuclear Information System (INIS)

    Johanson, Gunnar; Holmberg, J.

    1994-01-01

    Living Probabilistic Safety Assessment (PSA) is a daily safety management system and it is based on a plant-specific PSA and supporting information systems. In the living use of PSA, plant status knowledge is used to represent actual plant safety status in monitoring or follow-up perspective. The PSA model must be able to express the risk at a given time and plant configuration. The process, to update the PSA model to represent the current or planned configuration and to use the model to evaluate and direct the changes in the configuration, is called living PSA programme. The main purposes to develop and increase the usefulness of living PSA are: Long term safety planning: To continue the risk assessment process started with the basic PSA by extending and improving the basic models and data to provide a general risk evaluation tool for analyzing the safety effects of changes in plant design and procedures. Risk planning of operational activities: To support the operational management by providing means for searching optimal operational maintenance and testing strategies from the safety point of view. The results provide support for risk decision making in the short term or in a planning mode. The operational limits and conditions given by technical specifications can be analyzed by evaluating the risk effects of alternative requirements in order to balance the requirements with respect to operational flexibility and plant economy. Risk analysis of operating experience: To provide a general risk evaluation tool for analyzing the safety effects of incidents and plant status changes. The analyses are used to: identify possible high risk situations, rank the occurred events from safety point of view, and get feedback from operational events for the identification of risk contributors. This report describes the methods, models and applications required to continue the process towards a living use of PSA. 19 tabs, 20 figs

  14. Framework for the analysis of crystallization operations

    DEFF Research Database (Denmark)

    Meisler, Kresten Troelstrup; Abdul Samad, Noor Asma Fazli Bin; Gernaey, Krist

    Crystallization is often applied in the production of salts and/oractive pharmaceutical ingredients (API), and the crystallization step is an essential part of the manufacturing process for many chemicals-based products.In recent years the monitoring and analysis of crystallization operations has...

  15. Operational Automatic Remote Sensing Image Understanding Systems: Beyond Geographic Object-Based and Object-Oriented Image Analysis (GEOBIA/GEOOIA. Part 2: Novel system Architecture, Information/Knowledge Representation, Algorithm Design and Implementation

    Directory of Open Access Journals (Sweden)

    Luigi Boschetti

    2012-09-01

    Full Text Available According to literature and despite their commercial success, state-of-the-art two-stage non-iterative geographic object-based image analysis (GEOBIA systems and three-stage iterative geographic object-oriented image analysis (GEOOIA systems, where GEOOIA/GEOBIA, remain affected by a lack of productivity, general consensus and research. To outperform the Quality Indexes of Operativeness (OQIs of existing GEOBIA/GEOOIA systems in compliance with the Quality Assurance Framework for Earth Observation (QA4EO guidelines, this methodological work is split into two parts. Based on an original multi-disciplinary Strengths, Weaknesses, Opportunities and Threats (SWOT analysis of the GEOBIA/GEOOIA approaches, the first part of this work promotes a shift of learning paradigm in the pre-attentive vision first stage of a remote sensing (RS image understanding system (RS-IUS, from sub-symbolic statistical model-based (inductive image segmentation to symbolic physical model-based (deductive image preliminary classification capable of accomplishing image sub-symbolic segmentation and image symbolic pre-classification simultaneously. In the present second part of this work, a novel hybrid (combined deductive and inductive RS-IUS architecture featuring a symbolic deductive pre-attentive vision first stage is proposed and discussed in terms of: (a computational theory (system design, (b information/knowledge representation, (c algorithm design and (d implementation. As proof-of-concept of symbolic physical model-based pre-attentive vision first stage, the spectral knowledge-based, operational, near real-time, multi-sensor, multi-resolution, application-independent Satellite Image Automatic Mapper™ (SIAM™ is selected from existing literature. To the best of these authors’ knowledge, this is the first time a symbolic syntactic inference system, like SIAM™, is made available to the RS community for operational use in a RS-IUS pre-attentive vision first stage

  16. Analysis of the brazilian scientific production about information flows

    Directory of Open Access Journals (Sweden)

    Danielly Oliveira Inomata

    2015-07-01

    Full Text Available Objective. This paper presents and discuss the concepts, contexts and applications involving information flows in organizations. Method. Systematic review, followed by a bibliometric analysis and system analysis. The systematic review aimed to search for, evaluate and review evidence about the research topic. The systematic review process comprised the following steps: 1 definition of keywords, 2 systematic review, 3 exploration and analysis of articles and 4 comparison and consolidation of results. Results. A bibliometric analysis aimed to provide a statement of the relevance of articles where the authors, dates of publications, citation index, and periodic keywords with higher occurrence. Conclusions. As survey results confirms the emphasis on information featured in the knowledge management process, and advancing years, it seems that the emphasis is on networks, ie, studies are turning to the operationalization and analysis of flows information networks. The literature produced demonstrates the relationship of information flow with its management, applied to different organizational contexts, including showing new trends in information science as the study and analysis of information flow in networks.

  17. Process Analysis of the CV Group's Operation

    CERN Document Server

    Wilhelmsson, M

    2000-01-01

    This report will give an explanation of the internal reorganization that has been done because of the necessity to optimize operation in the cooling and ventilation group. The basic structure for the group was defined at the end of 1998. We understood then that change was needed to accommodate the increased workload due to the LHC project. In addition, we face a relatively large turnover of personnel (retirements and some recruitment) with related integration issues to consider. We would also like to implement new approaches in the management of both operations and maintenance. After some running-in problems during the first half of 1999, we realized that much more could be gained with the analysis and the definition and documenting of each single function and generic activity within the group. The authors will explain how this analysis was carried out and give some feedback of the outcome, so far.

  18. An Analysis of Modern Japanese Think Tank Prototype——SMR Investigation Organization and Its Operation Mechanism

    Directory of Open Access Journals (Sweden)

    Huang Wenyue

    2017-12-01

    Full Text Available [Purpose/significance] Through an analysis of SMR investigatory apparatus business and its operation mechanism, this paper discusses the development model of the investigation organ, the South Manchuria Railway think tank, and reveals the militarism influence on the early Japanese think tank development. [Method/process] This paper combed the SMR’s important survey agencies development pattern by the case study and literature survey and also discussed the key mechanism of operation system and organization characteristics. The evaluation of reports directed by the SMR provided references. [Result/conclusion] The SMR, as a colonial and aggressive policy tool, its surveys were done for the government and military authorities. With independent sources of information, the use of network intelligence structure and the combination of resident literature collection with field investigation, the collection of professional analysis personnel, the SMR investigation organization completes the decision-making through the scientific method and has reference value.

  19. Contracts and Information Structure in a Supply Chain with Operations and Marketing Interaction

    DEFF Research Database (Denmark)

    El Ouardighi, F.; Erickson, G.; Grass, D.

    2016-01-01

    and the consumer price. The state of the game is summarized in the firms' backlogs and the manufacturer's advertising goodwill. Depending on whether the supply chain members have and share state information, they may either make decisions contingent on the current state of the game (feedback Nash strategy......The objective of the paper is to study how wholesale price and revenue sharing contracts affect operations and marketing decisions in a supply chain under different dynamic informational structures. We suggest a differential game model of a supply chain consisting of a manufacturer and a single...... retailer that agree on the contract parameters at the outset of the game. The model includes key operational and marketing activities related to a single product in the supply chain. The manufacturer sets a production rate and the rate of advertising efforts while the retailer chooses a purchase rate...

  20. Science information to support Missouri River Scaphirhynchus albus (pallid sturgeon) effects analysis

    Science.gov (United States)

    Jacobson, Robert B.; Parsley, Michael J.; Annis, Mandy L.; Colvin, Michael E.; Welker, Timothy L.; James, Daniel A.

    2016-01-26

    The Missouri River Pallid Sturgeon Effects Analysis (EA) was commissioned by the U.S. Army Corps of Engineers to develop a foundation of understanding of how pallid sturgeon (Scaphirhynchus albus) population dynamics are linked to management actions in the Missouri River. The EA consists of several steps: (1) development of comprehensive, conceptual ecological models illustrating pallid sturgeon population dynamics and links to management actions and other drivers; (2) compilation and assessment of available scientific literature, databases, and models; (3) development of predictive, quantitative models to explore the system dynamics and population responses to management actions; and (4) analysis and assessment of effects of system operations and actions on species’ habitats and populations. This report addresses the second objective, compilation and assessment of relevant information.

  1. Plan for the design, development, and implementation, and operation of the National Water Information System

    Science.gov (United States)

    Edwards, M.D.

    1987-01-01

    The Water Resources Division of the U.S. Geological Survey is developing a National Water Information System (NWIS) that will integrate and replace its existing water data and information systems of the National Water Data Storage and Retrieval System, National Water Data Exchange, National Water-Use Information, and Water Resources Scientific Information Center programs. It will be a distributed data system operated as part of the Division 's Distributed Information System, which is a network of computers linked together through a national telecommunication network known as GEONET. The NWIS is being developed as a series of prototypes that will be integrated as they are completed to allow the development and implementation of the system in a phased manner. It also is being developed in a distributed manner using personnel who work under the coordination of a central NWIS Project Office. Work on the development of the NWIS began in 1983 and it is scheduled for completion in 1990. This document presents an overall plan for the design, development, implementation, and operation of the system. Detailed discussions are presented on each of these phases of the NWIS life cycle. The planning, quality assurance, and configuration management phases of the life cycle also are discussed. The plan is intended to be a working document for use by NWIS management and participants in its design and development and to assist offices of the Division in planning and preparing for installation and operation of the system. (Author 's abstract)

  2. Interim policy on establishment and operation of internet open, anonymous information servers and services

    OpenAIRE

    Acting Dean of Computer and Information Services

    1995-01-01

    Purpose. To establish interim NPS general policy regarding establishment and operation of Open, Anonymous Information Servers and Services, such as World Wide Web (http), Gopher, Anonymous FTP, etc...

  3. Operator Semigroups meet Complex Analysis, Harmonic Analysis and Mathematical Physics

    CERN Document Server

    Chill, Ralph; Tomilov, Yuri

    2015-01-01

    This proceedings volume originates from a conference held in Herrnhut in June 2013. It provides unique insights into the power of abstract methods and techniques in dealing successfully with numerous applications stemming from classical analysis and mathematical physics. The book features diverse topics in the area of operator semigroups, including partial differential equations, martingale and Hilbert transforms, Banach and von Neumann algebras, Schrödinger operators, maximal regularity and Fourier multipliers, interpolation, operator-theoretical problems (concerning generation, perturbation and dilation, for example), and various qualitative and quantitative Tauberian theorems with a focus on transfinite induction and magics of Cantor. The last fifteen years have seen the dawn of a new era for semigroup theory with the emphasis on applications of abstract results, often unexpected and far removed from traditional ones. The aim of the conference was to bring together prominent experts in the field of modern...

  4. The Role of Innovation in Internationalization of Brazilian Medium Firms that operate in Information Technology and Communication

    Directory of Open Access Journals (Sweden)

    Fernanda Ferreira Ribeiro

    2011-06-01

    Full Text Available The study aimed to examine the role of innovation in the internationalization of Brazilian companies that operate in the medium sector of Information and Communication Technology (ICT. To achieve this goal, we performed a descriptive qualitative research method used and how the study of multiple cases, which were researched in depth and Light Infocon and Dígitro. The main results of the survey revealed companies with different trajectories of internationalization, but whose innovation activities are central to the entry and operations in foreign markets. The results also showed the importance of innovative cooperative activities through alliances with universities, research institutes and other companies, and government support through funding. An additional contribution of this work was the analysis of the internationalization process of Brazilian companies innovative medium-sized sectors with high technological content, since most studies on internationalization in Brazil focuses on large industrial enterprises already established for decades in the national and sectors with low technological intensity.

  5. Feedback analysis of transimpedance operational amplifier circuits

    DEFF Research Database (Denmark)

    Bruun, Erik

    1993-01-01

    The transimpedance or current feedback operational amplifier (CFB op-amp) is reviewed and compared to a conventional voltage mode op-amp using an analysis emphasizing the basic feedback characteristics of the circuit. With this approach the paradox of the constant bandwidth obtained from CFB op...

  6. A selective study of Information technologies to improve operations efficiency in construction

    Directory of Open Access Journals (Sweden)

    Konikov Alexandr

    2018-01-01

    Full Text Available Today, information technologies (IT are used in almost every production industry. While the aspects of IT are well studied and discussed in relevant monographs, articles, web sources, etc., this paper reviews the performance improvement options in the construction industry by leveraging IT. From a wide range of information technologies the author has picked the most relevant solutions, from his point of view, based on several considerations, the most important one being the lack of adequate attention to these technologies specifically in the construction industry. The paper covers the following technologies: Big Data (a smart technology for high-speed processing of huge and diverse data arrays; situation centers (SC for construction and operations projects (SCs are successfully used in other industries for operating control of sophisticated facilities; data warehouses (DW for the construction industry (DWs are viewed as a standalone project rather than a supplement to Data Mining or Big Data; operational and dispatch radio communication service (radio communication can ensure instant connectivity between several subscribers; VSAT (a satellite technology for prompt connection of a distant construction site with the 'outer world' when no alternatives are available. The paper briefly presents the essence of each technology, describes the pre-requisites for its use in construction, outlines the key advantages, limits and shortcomings, and lists construction projects where it shall be worthwhile to use a specific technology projects.

  7. Defense Science Board 2006 Summer Study on Information Management for Net-Centric Operations. Volume 1: Main Report

    National Research Council Canada - National Science Library

    Schneider, Jr, William

    2007-01-01

    The task force addressed combat operations, information management, information assurance, and architecture requirements, as well as the architecture framework currently being pursued by the department...

  8. Choreographer Pre-Testing Code Analysis and Operational Testing.

    Energy Technology Data Exchange (ETDEWEB)

    Fritz, David J. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Harrison, Christopher B. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Perr, C. W. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Hurd, Steven A [Sandia National Laboratories (SNL-CA), Livermore, CA (United States)

    2014-07-01

    Choreographer is a "moving target defense system", designed to protect against attacks aimed at IP addresses without corresponding domain name system (DNS) lookups. It coordinates actions between a DNS server and a Network Address Translation (NAT) device to regularly change which publicly available IP addresses' traffic will be routed to the protected device versus routed to a honeypot. More details about how Choreographer operates can be found in Section 2: Introducing Choreographer. Operational considerations for the successful deployment of Choreographer can be found in Section 3. The Testing & Evaluation (T&E) for Choreographer involved 3 phases: Pre-testing, Code Analysis, and Operational Testing. Pre-testing, described in Section 4, involved installing and configuring an instance of Choreographer and verifying it would operate as expected for a simple use case. Our findings were that it was simple and straightforward to prepare a system for a Choreographer installation as well as configure Choreographer to work in a representative environment. Code Analysis, described in Section 5, consisted of running a static code analyzer (HP Fortify) and conducting dynamic analysis tests using the Valgrind instrumentation framework. Choreographer performed well, such that only a few errors that might possibly be problematic in a given operating situation were identified. Operational Testing, described in Section 6, involved operating Choreographer in a representative environment created through EmulyticsTM . Depending upon the amount of server resources dedicated to Choreographer vis-á-vis the amount of client traffic handled, Choreographer had varying degrees of operational success. In an environment with a poorly resourced Choreographer server and as few as 50-100 clients, Choreographer failed to properly route traffic over half the time. Yet, with a well-resourced server, Choreographer handled over 1000 clients without missrouting. Choreographer

  9. Operational Modal Analysis and the Performance Assessment of Vehicle Suspension Systems

    Directory of Open Access Journals (Sweden)

    L. Soria

    2012-01-01

    Full Text Available Comfort, road holding and safety of passenger cars are mainly influenced by an appropriate design of suspension systems. Improvements of the dynamic behaviour can be achieved by implementing semi-active or active suspension systems. In these cases, the correct design of a well-performing suspension control strategy is of fundamental importance to obtain satisfying results. Operational Modal Analysis allows the experimental structural identification in those that are the real operating conditions: Moving from output-only data, leading to modal models linearised around the more interesting working points and, in the case of controlled systems, providing the needed information for the optimal design and verification of the controller performance. All these characters are needed for the experimental assessment of vehicle suspension systems. In the paper two suspension architectures are considered equipping the same car type. The former is a semi-active commercial system, the latter a novel prototypic active system. For the assessment of suspension performance, two different kinds of tests have been considered, proving ground tests on different road profiles and laboratory four poster rig tests. By OMA-processing the signals acquired in the different testing conditions and by comparing the results, it is shown how this tool can be effectively utilised to verify the operation and the performance of those systems, by only carrying out a simple, cost-effective road test.

  10. Operations other than war: Requirements for analysis tools research report

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, D.S. III

    1996-12-01

    This report documents the research effort to determine the requirements for new or improved analysis tools to support decisions at the strategic and operational levels for military Operations Other than War (OOTW). The work was performed for the Commander in Chief, U.S. Pacific Command (USCINCPAC). The data collection was based on workshops attended by experts in OOTWs: analysis personnel from each of the Combatant Commands, the Services, the Office of the Secretary of Defense (OSD), the Joint Staff, and other knowledgeable personnel. Further data were gathered from other workshops and conferences and from the literature. The results of this research begin with the creation of a taxonomy of OOTWs: categories of operations, attributes of operations, and tasks requiring analytical support. The tasks are connected to the Joint Staff`s Universal Joint Task List (UJTL). Historical OOTWs are analyzed to produce frequency distributions by category and responsible CINC. The analysis products are synthesized into a list of requirements for analytical tools and definitions of the requirements. The report concludes with a timeline or roadmap for satisfying the requirements.

  11. Development and human factors analysis of an augmented reality interface for multi-robot tele-operation and control

    Science.gov (United States)

    Lee, Sam; Lucas, Nathan P.; Ellis, R. Darin; Pandya, Abhilash

    2012-06-01

    This paper presents a seamlessly controlled human multi-robot system comprised of ground and aerial robots of semiautonomous nature for source localization tasks. The system combines augmented reality interfaces capabilities with human supervisor's ability to control multiple robots. The role of this human multi-robot interface is to allow an operator to control groups of heterogeneous robots in real time in a collaborative manner. It used advanced path planning algorithms to ensure obstacles are avoided and that the operators are free for higher-level tasks. Each robot knows the environment and obstacles and can automatically generate a collision-free path to any user-selected target. It displayed sensor information from each individual robot directly on the robot in the video view. In addition, a sensor data fused AR view is displayed which helped the users pin point source information or help the operator with the goals of the mission. The paper studies a preliminary Human Factors evaluation of this system in which several interface conditions are tested for source detection tasks. Results show that the novel Augmented Reality multi-robot control (Point-and-Go and Path Planning) reduced mission completion times compared to the traditional joystick control for target detection missions. Usability tests and operator workload analysis are also investigated.

  12. 75 FR 66776 - BOEMRE Information Collection Activity: 1010-0043, Oil and Gas Well-Workover Operations...

    Science.gov (United States)

    2010-10-29

    .... Review well-workover diagrams and procedures to ensure the safety of well-workover operations. Verify... burden for this information collection is a total of 24,719 hours. The following chart details the... for well-workovers on a pressure chart or with a digital recorder; certify the information is correct...

  13. Outcome of 132 consecutive reconstructive operations for intestinal fistula--staged operation without primary anastomosis improved outcome in retrospective analysis

    DEFF Research Database (Denmark)

    Runström, B; Hallböök, O; Nyström, P O

    2013-01-01

    AIM: To study factors that influenced healing and survival after attempted closure of enterocutaneous fistula. MATERIAL AND METHODS: Retrospective analysis of prospective data concerning 101 patients operated on 132 instances for 110 enterocutaneous fistulae at two hospitals. RESULTS: In all, 96 ...... is a negative factor that requires careful planning of the operation.......AIM: To study factors that influenced healing and survival after attempted closure of enterocutaneous fistula. MATERIAL AND METHODS: Retrospective analysis of prospective data concerning 101 patients operated on 132 instances for 110 enterocutaneous fistulae at two hospitals. RESULTS: In all, 96...... (87%) of the 110 fistulae healed and 92 (91%) patients survived. A total of 9 patients with unhealed fistula died. Multivariate analysis revealed jaundice as an independent factor for both death and failed closure and operation without anastomosis as an independent positive factor for healing. Failure...

  14. Information Operations Primer

    Science.gov (United States)

    2008-11-01

    Nomination/Assignment/Allotment. • Electronic Warfare (EW) deconfliction via Joint Restricted Frequency List (JRFL) creation and analysis. • JRFL...restricted frequency list . The objectives of defensive IO include the following: 111 ■ Sustain the MAGTF commander‘s freedom of action...estimates and are also applied during the analysis and selection of friendly courses of action. (JP 1-02) Joint restricted frequency list (JRFL) A

  15. Automated information retrieval system for radioactivation analysis

    International Nuclear Information System (INIS)

    Lambrev, V.G.; Bochkov, P.E.; Gorokhov, S.A.; Nekrasov, V.V.; Tolstikova, L.I.

    1981-01-01

    An automated information retrieval system for radioactivation analysis has been developed. An ES-1022 computer and a problem-oriented software ''The description information search system'' were used for the purpose. Main aspects and sources of forming the system information fund, characteristics of the information retrieval language of the system are reported and examples of question-answer dialogue are given. Two modes can be used: selective information distribution and retrospective search [ru

  16. Reliability Analysis of Operation for Cableways by FTA (Fault Tree Analysis Method

    Directory of Open Access Journals (Sweden)

    Sergej Težak

    2010-05-01

    Full Text Available This paper examines the reliability of the operation of cableway systems in Slovenia, which has major impact on the quality of service in the mountain tourism, mainly in wintertime. Different types of cableway installations in Slovenia were captured in a sample and fault tree analysis (FTA was made on the basis of the obtained data. The paper presents the results of the analysis. With these results it is possible to determine the probability of faults of different types of cableways, which types of faults have the greatest impact on the termination of operation, which components of cableways fail most, what is the impact of age of cableways on the occurrence of the faults. Finally, an attempt was made to find if occurrence of faults on individual cableway installation has also impact on traffic on this cableway due to reduced quality of service. KEYWORDS: cableways, aerial ropeways, chairlifts, ski-tows, quality, faults, fault tree analysis, reliability, service quality, winter tourism, mountain tourist centre

  17. Report to the US Nuclear Regulatory Commission on Analysis and Evaluation of Operational Data, 1987: Nonreactors

    International Nuclear Information System (INIS)

    1988-10-01

    This annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1987. The report is published in two volumes. NUREG-1272, Vol. 2, No. 1, covers Power Reactors and presents an overview of the operating experience of the nuclear power industry, with comments regarding the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year, and summarizes information from Licensee Event Reports, the NRC's Operations Center, and Diagnostic Evaluations. NUREG-1272, Vol. 2, No. 2, covers Nonreactors and presents a review of the nonreactor events and misadministration reports that were reported in 1987 and a brief synopsis of AEOD studies published in 1987. Each volume contains a list of the AEOD reports issued for 1980-1987

  18. Role of cognitive models of operators in the design, operation and licensing of nuclear power plants

    International Nuclear Information System (INIS)

    Rasmussen, J.

    1982-01-01

    Cognitive models of the behavior of nuclear power plant operators - that is, models developed in terms of human properties rather than external task characteristics - are assuming increasingly important roles in plant design, operation and licensing. This is partly due to an increased concern for human decision making during unfamiliar plant conditions, and partly due to problems that arise when modern information technology is used to support operators in complex situations. Some of the problems identified during work on interface design and risk analysis are described. First, the question of categories of models is raised. Next, the use of cognitive models for system design is discussed. The use of the available cognitive models for more effective operator training is also advocated. The need for using cognitive models in risk analysis is also emphasized. Finally, the sources of human performance data, that is, event reports, incident analysis, experiments, and training simulators are mentioned, and the need for a consistent framework for data analysis based on cognitive models is discussed

  19. Technical Literature Review Concerning Management Information Systems.

    Science.gov (United States)

    interrelationships of the many aspects of management information systems (MIS); that is, with how analysis, design, operation, evaluation, and user considerations affect management information systems . (Author)

  20. Structured information analysis for human reliability analysis of emergency tasks in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Won Dea; Kim, Jae Whan; Park, Jin Kyun; Ha, Jae Joo [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-02-01

    More than twenty HRA (Human Reliability Analysis) methodologies have been developed and used for the safety analysis in nuclear field during the past two decades. However, no methodology appears to have universally been accepted, as various limitations have been raised for more widely used ones. One of the most important limitations of conventional HRA is insufficient analysis of the task structure and problem space. To resolve this problem, we suggest SIA (Structured Information Analysis) for HRA. The proposed SIA consists of three parts. The first part is the scenario analysis that investigates the contextual information related to the given task on the basis of selected scenarios. The second is the goals-means analysis to define the relations between the cognitive goal and task steps. The third is the cognitive function analysis module that identifies the cognitive patterns and information flows involved in the task. Through the three-part analysis, systematic investigation is made possible from the macroscopic information on the tasks to the microscopic information on the specific cognitive processes. It is expected that analysts can attain a structured set of information that helps to predict the types and possibility of human error in the given task. 48 refs., 12 figs., 11 tabs. (Author)

  1. Economic Optimization Analysis of Chengdu Electric Community Bus Operation

    Science.gov (United States)

    Yidong, Wang; Yun, Cai; Zhengping, Tan; Xiong, Wan

    2018-03-01

    In recent years, the government has strongly supported and promoted electric vehicles and has given priority to demonstration and popularization in the field of public transport. The economy of public transport operations has drawn increasing attention. In this paper, Chengdu wireless charging pure electric community bus is used as the research object, the battery, air conditioning, driver’s driving behavior and other economic influence factors were analyzed, and optimizing the operation plan through case data analysis, through the reasonable battery matching and mode of operation to help businesses effectively save operating costs and enhance economic efficiency.

  2. Analysis and design of nuclear energy information systems

    International Nuclear Information System (INIS)

    Yohanes Dwi Anggoro; Sriyana; Arief Tris Yuliyanto; Wiku Lulus Widodo

    2015-01-01

    Management of research reports and activities of the Center for Nuclear Energy System Assessment (PKSEN), either in the form of documents and the results of other activities, are important part of the series of activities PKSEN mission achievement. Management of good documents will facilitate the provision of improved inputs or use the maximum results. But over the past few years, there are still some problem in the management of research reports and activities performed by PKSEN. The purpose of this study is to analyze and design flow layout of the Nuclear Energy Information System to facilitate the implementation of the Nuclear Energy Information System. In addition to be used as a research management system and PKSEN activities, it can also be used as information media for the community. Nuclear Energy Information System package is expected to be ''one gate systems for PKSEN information. The research methodology used are: (i) analysis of organizational systems, (ii) the analysis and design of information systems; (iii) the analysis and design of software systems; (iv) the analysis and design of database systems. The results of this study are: had identified and resources throughout the organization PKSEN activation, had analyzed the application of SIEN using SWOT analysis, had identified several types of devices required, had been compiled hierarchy of SIEN, had determined that the database system used is a centralized database system and had elections MySQL as DBMS. The result is a basic design of the Nuclear Energy Information System) which will used as a research and activities management system of PKSEN and also can be used as a medium of information for the community. (author)

  3. Improvement of Steam Turbine Operational Performance and Reliability with using Modern Information Technologies

    Science.gov (United States)

    Brezgin, V. I.; Brodov, Yu M.; Kultishev, A. Yu

    2017-11-01

    The report presents improvement methods review in the fields of the steam turbine units design and operation based on modern information technologies application. In accordance with the life cycle methodology support, a conceptual model of the information support system during life cycle main stages (LC) of steam turbine unit is suggested. A classifying system, which ensures the creation of sustainable information links between the engineer team (manufacture’s plant) and customer organizations (power plants), is proposed. Within report, the principle of parameterization expansion beyond the geometric constructions at the design and improvement process of steam turbine unit equipment is proposed, studied and justified. The report presents the steam turbine unit equipment design methodology based on the brand new oil-cooler design system that have been developed and implemented by authors. This design system combines the construction subsystem, which is characterized by extensive usage of family tables and templates, and computation subsystem, which includes a methodology for the thermal-hydraulic zone-by-zone oil coolers design calculations. The report presents data about the developed software for operational monitoring, assessment of equipment parameters features as well as its implementation on five power plants.

  4. Information operator approach applied to the retrieval of vertical distributions of atmospheric constituents from ground-based FTIR measurements

    Science.gov (United States)

    Senten, Cindy; de Mazière, Martine; Vanhaelewyn, Gauthier; Vigouroux, Corinne; Delmas, Robert

    2010-05-01

    The retrieval of information about the vertical distribution of an atmospheric absorber from high spectral resolution ground-based Fourier Transform infrared (FTIR) solar absorption spectra is an important issue in remote sensing. A frequently used technique at present is the optimal estimation method. This work introduces the application of an alternative method, namely the information operator approach (Doicu et al., 2007; Hoogen et al., 1999), for extracting the available information from such FTIR measurements. This approach has been implemented within the well-known retrieval code SFIT2, by adapting the optimal estimation method such as to take into account only the significant contributions to the solution. In particular, we demonstrate the feasibility of the method when applied to ground-based FTIR spectra taken at the southern (sub)tropical site Ile de La Réunion (21° S, 55° E) in 2007. A thorough comparison has been made between the retrieval results obtained with the original optimal estimation method and the ones obtained with the information operator approach, regarding profile and column stability, information content and corresponding full error budget evaluation. This has been done for the target species ozone (O3), methane (CH4), nitrous oxide (N2O), and carbon monoxide (CO). It is shown that the information operator approach performs well and is capable of achieving the same accuracy as optimal estimation, with a gain of stability and with the additional advantage of being less sensitive to the choice of a priori information as well as to the actual signal-to-noise ratio. Keywords: ground-based FTIR, solar absorption spectra, greenhouse gases, information operator approach References Doicu, A., Hilgers, S., von Bargen, A., Rozanov, A., Eichmann, K.-U., von Savigny, C., and Burrows, J.P.: Information operator approach and iterative regularization methods for atmospheric remote sensing, J. Quant. Spectrosc. Radiat. Transfer, 103, 340-350, 2007

  5. Wind Information Uplink to Aircraft Performing Interval Management Operations

    Science.gov (United States)

    Ahmad, Nashat N.; Barmore, Bryan E.; Swieringa, Kurt A.

    2016-01-01

    Interval Management (IM) is an ADS-B-enabled suite of applications that use ground and flight deck capabilities and procedures designed to support the relative spacing of aircraft (Barmore et al., 2004, Murdoch et al. 2009, Barmore 2009, Swieringa et al. 2011; Weitz et al. 2012). Relative spacing refers to managing the position of one aircraft to a time or distance relative to another aircraft, as opposed to a static reference point such as a point over the ground or clock time. This results in improved inter-aircraft spacing precision and is expected to allow aircraft to be spaced closer to the applicable separation standard than current operations. Consequently, if the reduced spacing is used in scheduling, IM can reduce the time interval between the first and last aircraft in an overall arrival flow, resulting in increased throughput. Because IM relies on speed changes to achieve precise spacing, it can reduce costly, low-altitude, vectoring, which increases both efficiency and throughput in capacity-constrained airspace without negatively impacting controller workload and task complexity. This is expected to increase overall system efficiency. The Flight Deck Interval Management (FIM) equipment provides speeds to the flight crew that will deliver them to the achieve-by point at the controller-specified time, i.e., assigned spacing goal, after the target aircraft crosses the achieve-by point (Figure 1.1). Since the IM and target aircraft may not be on the same arrival procedure, the FIM equipment predicts the estimated times of arrival (ETA) for both the IM and target aircraft to the achieve-by point. This involves generating an approximate four-dimensional trajectory for each aircraft. The accuracy of the wind data used to generate those trajectories is critical to the success of the IM operation. There are two main forms of uncertainty in the wind information used by the FIM equipment. The first is the accuracy of the forecast modeling done by the weather

  6. Unreviewed Disposal Question Evaluation: Impact of New Information since 2008 PA on Current Low-Level Solid Waste Operations

    Energy Technology Data Exchange (ETDEWEB)

    Flach, G.; Smith, F.; Hamm, L.; Butcher, T.

    2014-10-06

    Solid low-level waste disposal operations are controlled in part by an E-Area Low-Level Waste Facility (ELLWF) Performance Assessment (PA) that was completed by the Savannah River National Laboratory (SRNL) in 2008 (WSRC 2008). Since this baseline analysis, new information pertinent to disposal operations has been identified as a natural outcome of ongoing PA maintenance activities and continuous improvement in model simulation techniques (Flach 2013). An Unreviewed Disposal Question (UDQ) Screening (Attachment 1) has been initiated regarding the continued ability of the ELLWF to meet Department of Energy (DOE) Order 435.1 performance objectives in light of new PA items and data identified since completion of the original UDQ Evaluation (UDQE). The present UDQE assesses the ability of Solid Waste (SW) to meet performance objectives by estimating the influence of new information items on a recent sum-of-fractions (SOF) snapshot for each currently active E-Area low-level waste disposal unit. A final SOF, as impacted by this new information, is projected based on the assumptions that the current disposal limits, Waste Information Tracking System (WITS) administrative controls, and waste stream composition remain unchanged through disposal unit operational closure (Year 2025). Revision 1 of this UDQE addresses the following new PA items and data identified since completion of the original UDQE report in 2013: New Kd values for iodine, radium and uranium; Elimination of cellulose degradation product (CDP) factors; Updated radionuclide data; Changes in transport behavior of mobile radionuclides; Potential delay in interim closure beyond 2025; and Component-in-grout (CIG) plume interaction correction. Consideration of new information relative to the 2008 PA baseline generally indicates greater confidence that PA performance objectives will be met than indicated by current SOF metrics. For SLIT9, the previous prohibition of non-crushable containers in revision 0

  7. The noise analysis and the BWR operation map

    International Nuclear Information System (INIS)

    Blazquez, J.; Ballestrin, J.

    1996-01-01

    An analytical expression for the Decay Ratio is obtained: DR = exp(-bW / P 1/2 ). The physics behind is also explained. It applies to a commercial BWR Operation Map, on the vicinity of the power instability. This functional form seems fitting to the structure of the Operation map. The power P and the coolant flow are measured straightforward; the Decay Ratio is obtained by neutron noise analysis techniques. The parameter b, depending on the void reactivity coefficient, is then calculated on line during the Reactor Operation. New DR value is now predicted for each new displacement on the Map, so unexpected instability events are more likely avoided. (authors)

  8. Mission Analysis, Operations, and Navigation Toolkit Environment (Monte) Version 040

    Science.gov (United States)

    Sunseri, Richard F.; Wu, Hsi-Cheng; Evans, Scott E.; Evans, James R.; Drain, Theodore R.; Guevara, Michelle M.

    2012-01-01

    Monte is a software set designed for use in mission design and spacecraft navigation operations. The system can process measurement data, design optimal trajectories and maneuvers, and do orbit determination, all in one application. For the first time, a single software set can be used for mission design and navigation operations. This eliminates problems due to different models and fidelities used in legacy mission design and navigation software. The unique features of Monte 040 include a blowdown thruster model for GRAIL (Gravity Recovery and Interior Laboratory) with associated pressure models, as well as an updated, optimalsearch capability (COSMIC) that facilitated mission design for ARTEMIS. Existing legacy software lacked the capabilities necessary for these two missions. There is also a mean orbital element propagator and an osculating to mean element converter that allows long-term orbital stability analysis for the first time in compiled code. The optimized trajectory search tool COSMIC allows users to place constraints and controls on their searches without any restrictions. Constraints may be user-defined and depend on trajectory information either forward or backwards in time. In addition, a long-term orbit stability analysis tool (morbiter) existed previously as a set of scripts on top of Monte. Monte is becoming the primary tool for navigation operations, a core competency at JPL. The mission design capabilities in Monte are becoming mature enough for use in project proposals as well as post-phase A mission design. Monte has three distinct advantages over existing software. First, it is being developed in a modern paradigm: object- oriented C++ and Python. Second, the software has been developed as a toolkit, which allows users to customize their own applications and allows the development team to implement requirements quickly, efficiently, and with minimal bugs. Finally, the software is managed in accordance with the CMMI (Capability Maturity Model

  9. Integrated Reporting Information System -

    Data.gov (United States)

    Department of Transportation — The Integrated Reporting Information System (IRIS) is a flexible and scalable web-based system that supports post operational analysis and evaluation of the National...

  10. "Measuring Operational Effectiveness of Information Technology Infrastructure Library (IIL) and the Impact of Critical Facilities Inclusion in the Process."

    Science.gov (United States)

    Woodell, Eric A.

    2013-01-01

    Information Technology (IT) professionals use the Information Technology Infrastructure Library (ITIL) process to better manage their business operations, measure performance, improve reliability and lower costs. This study examined the operational results of those data centers using ITIL against those that do not, and whether the results change…

  11. Study and realisation of chaining operators

    International Nuclear Information System (INIS)

    Khan, Mohd Solaiman

    1970-01-01

    Within the frame of researches in the field of binary analysis performed in the nuclear instrumentation department of the Saclay Nuclear Centre, this research thesis belongs to the field of applications of binary analysis theories, and more particularly to the development and study of a chaining operator (chaining operators are used to develop complex automatic systems with a clear separation between information processing and program-based management of this processing). The author first recalls some notions of binary analysis: algebraic binary sets, products and their specific properties, and practical realisation of binary functions by means of logical circuits. He recalls methods for the general study of sequential systems; generalities, base functions, elementary reflex functions, graphical study of sequential systems, search for and removal of commutation variations. He discusses the present organisation of electronic computers: software, hardware, synchronous and asynchronous control. He presents chaining operators: generalities, computation of a chaining operator, static aspect of chaining operators. He reports and comments the practical realisation of chaining operators: components, measurements performed on elaborated chaining operators, simulation experimental set-up [fr

  12. 76 FR 72243 - Proposed Information Collection (Operation Enduring Freedom/Operation Iraqi Freedom Veterans...

    Science.gov (United States)

    2011-11-22

    ... (Operation Enduring Freedom/ Operation Iraqi Freedom Veterans Health Needs Assessment) Activity; Comment... Operation Enduring Freedom/ Operation Iraqi Freedom veterans and their families. DATES: Written comments and...: Operation Enduring Freedom/Operation Iraqi Freedom Veterans Health Needs Assessment, VA Form 10-21091. OMB...

  13. The capitalization of operating leases: Analysis of the impact on the IBEX 35 companies

    Directory of Open Access Journals (Sweden)

    Francisca Pardo

    2018-06-01

    Full Text Available Purpose: This paper analyzes the consequences of the change in the accounting rules about operating leases in the companies and users of financial information. Design/methodology/approach: We use the constructive capitalization method to estimate the liabilities and leased assets and perform an ex ante analysis of the regulatory impact in the IBEX 35 non-financial companies. Non-parametric tests are employed to examine the effect on certain ratios, and through a multivariate regression we investigate the business characteristics that explain the variation of EBITDA. Findings: The ratios under study are significantly affected by the capitalization of operating leases. The explanatory analysis shows that larger companies, which have a higher market valuation and belong to the retail sectors are the ones with a greater increase in EBITDA. Research limitations/implications: The sample size is small, which implies some caution in the generalization of the results. Certain hypotheses have been introduced to apply the constructive method, although the sensitivity tests confirm that the results are robust. Practical implications: In certain cases, to avoid non-compliance with restrictions, particularly in debt contracts, contract renegotiations should be initiated. The constructive method yields liabilities and assets significantly smaller than other simpler methods (such as the factor method, so these results can be a relief for certain non-sophisticated users. Social implications: Investors, shareholders and lenders, and other users will have more transparent information, which should improve their decision-making. Originality/value: The study of the impact on the magnitudes of the balance sheet and the financial ratios is complemented with a descriptive analysis, which takes into account the industry, and with the modeling of the explanatory factors of the change in EBITDA.

  14. Reliability analysis of meteorological data registered during nuclear power plant normal operation

    International Nuclear Information System (INIS)

    Amado, V.; Ulke, A.; Marino, B.; Thomas, L.

    2011-01-01

    The atmosphere is the environment in which gaseous radioactive discharges from nuclear power plants are transported. It is therefore essential to have reliable meteorological information to characterize the dispersion and feed evaluation models and radiological environmental impact during normal operation of the plant as well as accidental releases. In this way it is possible to determine the effects on the environment and in humans. The basic data needed to represent adequately the local weather include air temperature, wind speed and direction, rainfall, humidity and pressure. On the other hand, specific data consistent with the used model is required to determine the turbulence, for instance, radiation, cloud cover and vertical temperature gradient. It is important that the recorded data are representative of the local meteorology. This requires, first, properly placed instruments, that should be kept in operation and undergoing maintenance on a regular basis. Second, but equally substantial, a thorough analysis of its reliability must be performed prior to storage and/or data processing. In this paper we present the main criteria to consider choosing the location of a meteorological tower in the area of a nuclear power plant and propose a methodology for assessing the reliability of recorded data. The methodology was developed from the analysis of meteorological data registered in nuclear power plants in Argentina. (authors) [es

  15. On knowledge structures for process operators

    International Nuclear Information System (INIS)

    Wirstad, J.

    1981-05-01

    A conceptual framework for operator competency and job training planning and design being developed and used for operators in Swedish nuclear power stations is presented briefly. This conceptual framework represents a training technological approach. It uses terms which are system oriented and familiar to people working in the plant. Another conceptual framework is focusing on the information processing of the operator and its relation to physical, functional and abstract representations of the plant and the process. This conceptual framework has been developed by Risoe in Denmark especially for man process-interaction analysis and design. There are interesting relations between the two structures, e.g. human information processing in plant operation is largely a function of operator learning of the work, the processes and the plants units, its subsystems and components. The two framework are analysed and relations between them are indicated. (author)

  16. Benefit analysis of proposed information systems

    OpenAIRE

    Besore, Mark H.

    1991-01-01

    Approved for public release; distribution is unlimited This thesis reviewed two different approaches to benefit analysis, benefit comparison and user satisfaction, that could be applied to the evaluation of proposed information systems which are under consideration for acquisition by the federal government. Currently the General Services Administration only recommends that present value analysis methods be used in the analysis of alternatives even though the GSA specifies...

  17. Analysis of Optimal Operation of an Energy Integrated Distillation Plant

    DEFF Research Database (Denmark)

    Li, Hong Wen; Hansen, C.A.; Gani, Rafiqul

    2003-01-01

    The efficiency of manufacturing systems can be significantly increased through diligent application of control based on mathematical models thereby enabling more tight integration of decision making with systems operation. In the present paper analysis of optimal operation of an energy integrated...

  18. Crime analysis using open source information

    DEFF Research Database (Denmark)

    Nizamani, Sarwat; Memon, Nasrullah; Shah, Azhar Ali

    2015-01-01

    In this paper, we present a method of crime analysis from open source information. We employed un-supervised methods of data mining to explore the facts regarding the crimes of an area of interest. The analysis is based on well known clustering and association techniques. The results show...

  19. Operating force information on-line acquisition of a novel slave manipulator for vascular interventional surgery.

    Science.gov (United States)

    Zhao, Yan; Guo, Shuxiang; Xiao, Nan; Wang, Yuxin; Li, Youxiang; Jiang, Yuhua

    2018-04-02

    Vascular interventional surgery has its advantages compared to traditional operation. Master-slave robotic technology can further improve the operation accuracy, efficiency and safety of this complicated and high risk surgery. However, on-line acquisition of operating force information of catheter and guidewire remains to be a significant obstacle on the path to enhancing robotic surgery safety. Thus, a novel slave manipulator is proposed in this paper to realize on-line sensing of guidewire torsional operating torque and axial operation force during robotic assisted operations. A strain sensor is specially designed to detect the small scale torsional operation torque with low rotational frequency. Additionally, the axial operating force is detected via a load cell, which is incorporated into a sliding mechanism to eliminate the influence of friction. For validation, calibration and performance evaluation experiments are conducted. The results indicate that the proposed operation torque and force detection device is effective. Thus, it can provide the foundation for enabling accurate haptic feedback to the surgeon to improve surgical safety.

  20. Application of signature analysis for determining the operational readiness of motor-operated valves under blowdown test conditions

    International Nuclear Information System (INIS)

    Haynes, H.D.

    1990-01-01

    In support of the NRC-funded Nuclear Plant Aging Research (NPAR) program, Oak Ridge National Laboratory (ORNL) has carried out a comprehensive aging assessment of motor-operated valves (MOVs). As part of this work, ORNL participated in the gate valve flow interrruption blowdown (GVFIB) tests carried out in Huntsville, Alabama. The tests provided an excellent opportunity to evaluate signature analysis methods for determining the operability of MOVs under accident conditions. ORNL acquired motor current and torque switch shaft angular position signatures on two test MOVs during several GVFIB tests. The reduction in operating ''margin'' of both MOVs due to the presence of additional valve running loads imposed by high flow was clearly observed in motor current and torque switch angular position signatures. In addition, the effects of differential pressure, fluid temperature, and line voltage on MOV operations were observed and more clearly understood as a result of utilizing the signature analysis techniques. (orig.)

  1. Measurement and analysis of operating system fault tolerance

    Science.gov (United States)

    Lee, I.; Tang, D.; Iyer, R. K.

    1992-01-01

    This paper demonstrates a methodology to model and evaluate the fault tolerance characteristics of operational software. The methodology is illustrated through case studies on three different operating systems: the Tandem GUARDIAN fault-tolerant system, the VAX/VMS distributed system, and the IBM/MVS system. Measurements are made on these systems for substantial periods to collect software error and recovery data. In addition to investigating basic dependability characteristics such as major software problems and error distributions, we develop two levels of models to describe error and recovery processes inside an operating system and on multiple instances of an operating system running in a distributed environment. Based on the models, reward analysis is conducted to evaluate the loss of service due to software errors and the effect of the fault-tolerance techniques implemented in the systems. Software error correlation in multicomputer systems is also investigated.

  2. Coexistence or Operational Necessity: The Role of Formally Structured Organisation and Informal Networks during Deployments

    Science.gov (United States)

    2011-06-01

    Problems need innovative solutions and agile collaboration across boundaries and norms to configure customised approaches at the local level. While... customised capabilities. Thus a context or operational environment can be understood as one that will generally generate certain types of problems...Lack of critical mass of research into informal networks in the military during operational circumstances; • anecdotal evidence (Cause, Ritcher et

  3. CONTEMPORARY APPROACHES OF COMPANY PERFORMANCE ANALYSIS BASED ON RELEVANT FINANCIAL INFORMATION

    Directory of Open Access Journals (Sweden)

    Sziki Klara

    2012-12-01

    Full Text Available In this paper we chose to present two components of the financial statements: the profit and loss account and the cash flow statement. These summary documents and different indicators calculated based on them allow us to formulate assessments on the performance and profitability on various functions and levels of the company’s activity. This paper aims to support the hypothesis that the accounting information presented in the profit and loss account and in the cash flow statement is an appropriate source for assessing company performance. The purpose of this research is to answer the question linked to the main hypothesis: Is it the profit and loss statement or the cash flow account that reflects better the performance of a business? Based on the literature of specialty studied we tried a conceptual, analytical and practical approach of the term performance, overviewing some terminological acceptations of the term performance as well as the main indicators of performance analysis on the basis of the profit and loss account and of the cash flow statement: aggregated indicators, also known as intermediary balances of administration, economic rate of return, rate of financial profitability, rate of return through cash flows, operating cash flow rate, rate of generating operating cash out of gross operating result. At the same time we had a comparative approach of the profit and loss account and cash flow statement, outlining the main advantages and disadvantages of these documents. In order to demonstrate the above theoretical assessments, we chose to analyze these indicators based on information from the financial statements of SC Sinteza SA, a company in Bihor county, listed on the Bucharest Stock Exchange.

  4. Remote one-qubit information concentration and decoding of operator quantum error-correction codes

    International Nuclear Information System (INIS)

    Hsu Liyi

    2007-01-01

    We propose the general scheme of remote one-qubit information concentration. To achieve the task, the Bell-correlated mixed states are exploited. In addition, the nonremote one-qubit information concentration is equivalent to the decoding of the quantum error-correction code. Here we propose how to decode the stabilizer codes. In particular, the proposed scheme can be used for the operator quantum error-correction codes. The encoded state can be recreated on the errorless qubit, regardless how many bit-flip errors and phase-flip errors have occurred

  5. Evolution and Implementation of the NASA Robotic Conjunction Assessment Risk Analysis Concept of Operations

    Science.gov (United States)

    Newman, L.; Hejduk, M.; Frigm, R.; Duncan, M.

    2014-09-01

    On-orbit collisions pose a significant mission risk to satellites operating in the space environment. Recognizing the likelihood and consequence of on-orbit collisions, NASA has taken several proactive measures to mitigate the risk of both a catastrophic loss of mission and the increase in the space debris population. In fall 2004, NASA GSFC established an Agency-wide, institutionalized process and service for identifying and reacting to predicted close approaches. The team responsible for executing this mission is the NASA Robotic Conjunction Assessment Risk Analysis (CARA) team. By fall 2005, this process had resulted in the execution of the first collision avoidance maneuver by a NASA unmanned satellite. In February 2008, NASA adopted a policy, documented in NASA Procedural Requirement 8715.6a Process for Limiting Orbital Debris that directed maneuverable satellites to have such an on-orbit collision mitigation process. In 2009, NASA decided to require support for all operational satellites. By January 2014, the CARA team has processed nearly 500,000 close approach messages from the Joint Space Operations Center (JSpOC) and has assisted our mission customers with planning and executing over 75 collision avoidance maneuvers for unmanned satellites in LEO, GEO, and HEO orbital regimes. With the increase in number of operational missions supported; growth in the orbital debris environment due to events such as the intentional destruction of the Fengyun 1-C satellite in 2007 and collision between Iridium-33 and Cosmos-2251; and improvements to the United States Space Surveillance Network (SSN) and its ability to track, catalog, and screen against small debris objects, the demands on the CARA process have consequently required the CARA Concept of Operations (CONOPS) to evolve to manage those demands. This evolution is centered on the ability to effectively and efficiently manage JSpOC, CARA, and Mission Operations resources, applying operational and analytical

  6. Operating reactors licensing actions summary

    International Nuclear Information System (INIS)

    1982-07-01

    The operating reactors licensing actions summary is designed to provide the management of the Nuclear Regulatory Commission (NRC) with an overview of licensing actions dealing with operating power and nonpower reactors. These reports utilize data collected from the Division of Licensing in the Office of Nuclear Reactor Regulation and are prepared by the Office of Management and Program Analysis. This summary report is published primarily for internal NRC use in managing the operating reactors licensing actions program. Its content will change based on NRC management informational requirements

  7. Operating reactors licensing actions summary

    International Nuclear Information System (INIS)

    1982-05-01

    The operating reactors licensing actions summary is designed to provide the management of the Nuclear Regulatory Commission (NRC) with an overview of licensing actions dealing with operating power and nonpower reactors. These reports utilize data collected from the Division of Licensing in the Office of Nuclear Reactor Regulation and are prepared by the Office of Management and Program Analysis. This summary report is published primarily for internal NRC use in managing the operating reactors licensing actions program. Its content will change based on NRC management informational requirements

  8. Operating reactors licensing actions summary

    International Nuclear Information System (INIS)

    1983-01-01

    The operating reactors licensing actions summary is designed to provide the management of the Nuclear Regulatory Commission (NRC) with an overview of licensing actions dealing with operating power and nonpower reactors. These reports utilize data collected from the Division of Licensing in the Office of Nuclear Reactor Regulation and are prepared by the Office of Management and Program Analysis. This summary report is published primarily for internal NRC use in managing the operating reactors licensing actions program. Its content will change based on NRC management informational requirements

  9. Operating reactors licensing actions summary

    International Nuclear Information System (INIS)

    1983-03-01

    The operating reactors licensing actions summary is designed to provide the management of the Nuclear Regulatory Commission (NRC) with an overview of licensing actions dealing with operating power and nonpower reactors. These reports utilize data collected from the Division of Licensing in the Office of Nuclear Reactor Regulation and are prepared by the Office of Management and Program Analysis. This summary report is published primarily for internal NRC use in managing the operating reactors licensing actions program. Its content will change based on NRC management informational requirements

  10. Operating reactors licensing actions summary

    International Nuclear Information System (INIS)

    1982-11-01

    The operating reactors licensing actions summary is designed to provide the management of the Nuclear Regulatory Commission (NRC) with an overview of licensing actions dealing with operating power and nonpower reactors. These reports utilize data collected from the Division of Licensing in the Office of Nuclear Reactor Regulation and are prepared by the Office of Management and Program Analysis. This summary report is published primarily for internal NRC use in managing the operating reactors licensing actions program. Its content will change based on NRC management informational requirements

  11. Operating reactors licensing actions summary

    International Nuclear Information System (INIS)

    1982-10-01

    The operating reactors licensing actions summary is designed to provide the management of the Nuclear Regulatory Commission (NRC) with an overview of licensing actions dealing with operating power and nonpower reactors. These reports utilize data collected from the Division of Licensing in the Office of Nuclear Reactor Regulation and are prepared by the Office of Management and Program Analysis. This summary report is published primarily for internal NRC use in managing the operating reactors licensing actions program. Its content will change based on NRC management informational requirements

  12. Operating reactors licensing actions summary

    International Nuclear Information System (INIS)

    1982-08-01

    The operating reactors licensing actions summary is designed to provide the management of the Nuclear Regulatory Commission (NRC) with an overview of licensing actions dealing with operating power and nonpower reactors. These reports utilize data collected from the Division of Licensing in the Office of Nuclear Reactor Regulation and are prepared by the Office of Management and Program Analysis. This summary report is published primarily for internal NRC use in managing the operating reactors licensing actions program. Its content will change based on NRC management informational requirements

  13. Operating reactors licensing actions summary

    International Nuclear Information System (INIS)

    1982-09-01

    The operating reactors licensing actions summary is designed to provide the management of the Nuclear Regulatory Commission (NRC) with an overview of licensing actions dealing with operating power and nonpower reactors. These reports utilize data collected from the Division of Licensing in the Office of Nuclear Reactor Regulation and are prepared by the Office of Management and Program Analysis. This summary report is published primarily for internal NRC use in managing the operating reactors licensing actions program. Its content will change based on NRC management informational requirements

  14. FROM UAS DATA ACQUISITION TO ACTIONABLE INFORMATION – HOW AN END-TO-END SOLUTION HELPS OIL PALM PLANTATION OPERATORS TO PERFORM A MORE SUSTAINABLE PLANTATION MANAGEMENT

    Directory of Open Access Journals (Sweden)

    C. Hoffmann

    2016-06-01

    Full Text Available Palm oil represents the most efficient oilseed crop in the world but the production of palm oil involves plantation operations in one of the most fragile environments - the tropical lowlands. Deforestation, the drying-out of swampy lowlands and chemical fertilizers lead to environmental problems that are putting pressure on this industry. Unmanned aircraft systems (UAS together with latest photogrammetric processing and image analysis capabilities represent an emerging technology that was identified to be suitable to optimize oil palm plantation operations. This paper focuses on two key elements of a UAS-based oil palm monitoring system. The first is the accuracy of the acquired data that is necessary to achieve meaningful results in later analysis steps. High performance GNSS technology was utilized to achieve those accuracies while decreasing the demand for cost-intensive GCP measurements. The second key topic is the analysis of the resulting data in order to optimize plantation operations. By automatically extracting information on a block level as well as on a single-tree level, operators can utilize the developed application to increase their productivity. The research results describe how operators can successfully make use of a UAS-based solution together with the developed software solution to improve their efficiency in oil palm plantation management.

  15. On providing the fault-tolerant operation of information systems based on open content management systems

    Science.gov (United States)

    Kratov, Sergey

    2018-01-01

    Modern information systems designed to service a wide range of users, regardless of their subject area, are increasingly based on Web technologies and are available to users via Internet. The article discusses the issues of providing the fault-tolerant operation of such information systems, based on free and open source content management systems. The toolkit available to administrators of similar systems is shown; the scenarios for using these tools are described. Options for organizing backups and restoring the operability of systems after failures are suggested. Application of the proposed methods and approaches allows providing continuous monitoring of the state of systems, timely response to the emergence of possible problems and their prompt solution.

  16. PSOLA: A Heuristic Land-Use Allocation Model Using Patch-Level Operations and Knowledge-Informed Rules.

    Directory of Open Access Journals (Sweden)

    Yaolin Liu

    Full Text Available Optimizing land-use allocation is important to regional sustainable development, as it promotes the social equality of public services, increases the economic benefits of land-use activities, and reduces the ecological risk of land-use planning. Most land-use optimization models allocate land-use using cell-level operations that fragment land-use patches. These models do not cooperate well with land-use planning knowledge, leading to irrational land-use patterns. This study focuses on building a heuristic land-use allocation model (PSOLA using particle swarm optimization. The model allocates land-use with patch-level operations to avoid fragmentation. The patch-level operations include a patch-edge operator, a patch-size operator, and a patch-compactness operator that constrain the size and shape of land-use patches. The model is also integrated with knowledge-informed rules to provide auxiliary knowledge of land-use planning during optimization. The knowledge-informed rules consist of suitability, accessibility, land use policy, and stakeholders' preference. To validate the PSOLA model, a case study was performed in Gaoqiao Town in Zhejiang Province, China. The results demonstrate that the PSOLA model outperforms a basic PSO (Particle Swarm Optimization in the terms of the social, economic, ecological, and overall benefits by 3.60%, 7.10%, 1.53% and 4.06%, respectively, which confirms the effectiveness of our improvements. Furthermore, the model has an open architecture, enabling its extension as a generic tool to support decision making in land-use planning.

  17. Analysis of operational events by ATHEANA framework for human factor modelling

    International Nuclear Information System (INIS)

    Bedreaga, Luminita; Constntinescu, Cristina; Doca, Cezar; Guzun, Basarab

    2007-01-01

    In the area of human reliability assessment, the experts recognise the fact that the current methods have not represented correctly the role of human in prevention, initiating and mitigating the accidents in nuclear power plants. The nature of this deficiency appears because the current methods used in modelling of human factor have not taken into account the human performance and reliability such as it has been observed in the operational events. ATHEANA - A Technique for Human Error ANAlysis - is a new methodology for human analysis that has included the specific data of operational events and also psychological models for human behaviour. This method has included new elements such as the unsafe action and error mechanisms. In this paper we present the application of ATHEANA framework in the analysis of operational events that appeared in different nuclear power plants during 1979-2002. The analysis of operational events has consisted of: - identification of the unsafe actions; - including the unsafe actions into a category, omission ar commission; - establishing the type of error corresponding to the unsafe action: slip, lapse, mistake and circumvention; - establishing the influence of performance by shaping the factors and some corrective actions. (authors)

  18. Analysis of the foreign systems for classification and marking the NPP unit components during their application in information systems

    International Nuclear Information System (INIS)

    Bylkin, B.K.; Shaposhnikov, V.A.; Sadovoj, Yu.K.; Tikhonovskij, V.L.; Chujko, D.V.

    2006-01-01

    Procedures accepted and permitted in an information system (IS) to arrange and to rank information drawn up to ensure the information support of decommissioning of an NPP power unit affect the application convenience and efficiency of the IS taken as a whole. The IS supporting the decommissioning efforts stores large volume of information, that is why, the problem to choose systems to ensure information ranking is the urgent one. The paper deals with the analysis of the foreign systems to rank the components used during an NPP operation. Besides, one considers the application of the mentioned systems to arrange and to rank the information on decommissioning of an NPP power unit presented to users [ru

  19. Defense Waste Processing Facility staged operations: environmental information document

    International Nuclear Information System (INIS)

    1981-11-01

    Environmental information is presented relating to a staged version of the proposed Defense Waste Processing Facility (DWPF) at the Savannah River Plant. The information is intended to provide the basis for an Environmental Impact Statement. In either the integral or the staged design, the DWPF will convert the high-level waste currently stored in tanks into: a leach-resistant form containing about 99.9% of all the radioactivity, and a residual, slightly contaminated salt, which is disposed of as saltcrete. In the first stage of the staged version, the insoluble sludge portion of the waste and the long lived radionuclides contained therein will be vitrified. The waste glass will be sealed in canisters and stored onsite until shipped to a Federal repository. In the second stage, the supernate portion of the waste will be decontaminated by ion exchange. The recovered radionuclides will be transferred to the Stage 1 facility, and mixed with the sludge feed before vitrification. The residual, slightly contaminated salt solution will be mixed with Portland cement to form a concrete product (saltcrete) which will be buried onsite in an engineered landfill. This document describes the conceptual facilities and processes for producing glass waste and decontaminated salt. The environmental effects of facility construction, normal operations, and accidents are then presented. Descriptions of site and environs, alternative sites and waste disposal options, and environmental consultations and permits are given in the base Environmental Information Document

  20. Analysis of Navy Supply Corps Lines of Operation

    Science.gov (United States)

    2017-12-01

    Expeditionary Combat Support FM Financial Management FM Field Manual HCS Department of Defense Logistics Human Capital Strategy JCS Joint Chiefs of Staff...allocation, control, and execution of resources and funds for DOD organizations” ( Office of Supply Corps Personnel, 2011, p. 9) and that Financial ...Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget

  1. Forecast Informed Reservoir Operations: Bringing Science and Decision-Makers Together to Explore Use of Hydrometeorological Forecasts to Support Future Reservoir Operations

    Science.gov (United States)

    Ralph, F. M.; Jasperse, J.

    2017-12-01

    Forecast Informed Reservoir Operations (FIRO) is a proposed strategy that is exploring inorporation of improved hydrometeorological forecasts of land-falling atmospheric rivers on the U.S. West Coast into reservoir operations. The first testbed for this strategy is Lake Mendocino, which is located in the East Fork of the 1485 mi2 Russian River Watershed in northern California. This project is guided by the Lake Mendocino FIRO Steering Committee (SC). The SC is an ad hoc committee that consists of water managers and scientists from several federal, state, and local agencies, and universities who have teamed to evaluate whether current or improved technology and scientific understanding can be utilized to improve water supply reliability, enhance flood mitigation and support recovery of listed salmon for the Russian River of northern California. In 2015, the SC created a detailed work plan, which included a Preliminary Viability Assessment, which has now been completed. The SC developed a vision that operational efficiency would be improved by using forecasts to inform decisions about releasing or storing water. FIRO would use available reservoir storage in an efficient manner by (1) better forecasting inflow (or lack of inflow) with enhanced technology, and (2) adapting operation in real time to meet the need for storage, rather than making storage available just in case it is needed. The envisioned FIRO strategy has the potential to simultaneously improve water supply reliability, flood protection, and ecosystem outcomes through a more efficient use of existing infrastructure while requiring minimal capital improvements in the physical structure of the dam. This presentation will provide an overview of the creation of the FIRO SC and how it operates, and describes the lessons learned through this partnership. Results in the FIRO Preliminary Viability Assessment will be summarized and next steps described.

  2. Ultrascalable Techniques Applied to the Global Intelligence Community Information Awareness Common Operating Picture (IA COP)

    National Research Council Canada - National Science Library

    Valdes, Alfonso; Kadte, Jim

    2005-01-01

    The focus of this research is to develop detection, correlation, and representation approaches to address the needs of the Intelligence Community Information Awareness Common Operating Picture (IA COP...

  3. GTRI Remote Monitoring System: Training and Operational Needs Assessment Analysis Report

    Energy Technology Data Exchange (ETDEWEB)

    Day, Debra E.; Fox, Sorcha

    2012-04-20

    The mission of the United States Department of Energy (DOE) National Nuclear Security Administrations (NNSA's) Global Threat Reduction Initiative (GTRI) is to identify, secure, recover and facilitate the disposition of vulnerable nuclear and high-risk radioactive materials around the world that pose a threat to the United States and the international community. The GTRI's unique mission to reduce and protect vulnerable nuclear and radiological materials located at civilian sites worldwide directly addresses recommendations of the 9/11 Commission1, and is a vital part of the President's National Security Strategy and the Global Initiative. The GTRI Remote Monitoring System (RMS) is a standalone security system that includes radiation and tamper alarms, and CCTV; which can be transmitted securely over the Internet to multiple on-site and off-site locations. Through our experiences during installation of the system at 162 sites, plus feedback received from Alarm Response Training course participants, site input to project teams and analysis of trouble calls; indications were that current system training was lacking and inconsistent. A survey was undertaken to gather information from RMS users across the nation, to evaluate the current level of training and determine what if any improvements needed to be made. Additional questions were focused on the operation of the RMS software. The training survey was initially sent electronically to 245 users at the RMS sites and achieved a 37.6% return rate. Analysis of the resulting data revealed that 34.6% of the respondents had not received training or were unsure if they had, despite the fact that vendor engineers provide training at installation of the system. Any training received was referred to as minimal, and brief, not documented, and nothing in writing. 63.7% of respondents said they were either not at all prepared or only somewhat prepared to use the RMS software required to effectively operate the

  4. Novel migration operators of biogeography-based optimization and Markov analysis

    DEFF Research Database (Denmark)

    Guo, Weian; Wang, Lei; Si, Chenyong

    2016-01-01

    , and therefore, the algorithm’s performance worsens. In this paper, we propose three novel migration operators to enhance the exploration ability of BBO. To present a mathematical proof, Markov analysis is conducted to confirm the advantages of the proposed migration operators over existing ones. In addition...

  5. Benefits analysis of Soft Open Points for electrical distribution network operation

    International Nuclear Information System (INIS)

    Cao, Wanyu; Wu, Jianzhong; Jenkins, Nick; Wang, Chengshan; Green, Timothy

    2016-01-01

    Highlights: • An analysis framework was developed to quantify the operational benefits. • The framework considers both network reconfiguration and SOP control. • Benefits were analyzed through both quantitative and sensitivity analysis. - Abstract: Soft Open Points (SOPs) are power electronic devices installed in place of normally-open points in electrical power distribution networks. They are able to provide active power flow control, reactive power compensation and voltage regulation under normal network operating conditions, as well as fast fault isolation and supply restoration under abnormal conditions. A steady state analysis framework was developed to quantify the operational benefits of a distribution network with SOPs under normal network operating conditions. A generic power injection model was developed and used to determine the optimal SOP operation using an improved Powell’s Direct Set method. Physical limits and power losses of the SOP device (based on back to back voltage-source converters) were considered in the model. Distribution network reconfiguration algorithms, with and without SOPs, were developed and used to identify the benefits of using SOPs. Test results on a 33-bus distribution network compared the benefits of using SOPs, traditional network reconfiguration and the combination of both. The results showed that using only one SOP achieved a similar improvement in network operation compared to the case of using network reconfiguration with all branches equipped with remotely controlled switches. A combination of SOP control and network reconfiguration provided the optimal network operation.

  6. An operator expansion technique for path integral analysis

    International Nuclear Information System (INIS)

    Tsvetkov, I.V.

    1995-01-01

    A new method of path integral analysis in the framework of a power series technique is presented. The method is based on the operator expansion of an exponential. A regular procedure to calculate the correction terms is found. (orig.)

  7. Upgraded safety analysis document including operations policies, operational safety limits and policy changes. Revision 2

    International Nuclear Information System (INIS)

    Batchelor, K.

    1996-03-01

    The National Synchrotron Light Source Safety Analysis Reports (1), (2), (3), BNL reports number-sign 51584, number-sign 52205 and number-sign 52205 (addendum) describe the basic Environmental Safety and Health issues associated with the department's operations. They include the operating envelope for the Storage Rings and also the rest of the facility. These documents contain the operational limits as perceived prior or during construction of the facility, much of which still are appropriate for current operations. However, as the machine has matured, the experimental program has grown in size, requiring more supervision in that area. Also, machine studies have either verified or modified knowledge of beam loss modes and/or radiation loss patterns around the facility. This document is written to allow for these changes in procedure or standards resulting from their current mode of operation and shall be used in conjunction with the above reports. These changes have been reviewed by NSLS and BNL ES and H committee and approved by BNL management

  8. Plant Operation Station for HTR-PM Low Power and Shutdown operation Probabilistic safety analysis

    International Nuclear Information System (INIS)

    Liu Tao; Tong Jiejuan

    2014-01-01

    Full range Probabilistic safety analysis (PSA) is one of key conditions for nuclear power plant (NPP) licensing according to the requirement of nuclear safety regulatory authority. High Temperature Gas Cooled Reactor Pebble-bed Module (HTR-PM) has developed construction design and prepared for the charging license application. So after the normal power operation PSA submitted for review, the Low power and Shutdown operation Probabilistic safety analysis (LSPSA) also begin. The results of LSPSA will together with prior normal power PSA results to demonstrate the safety level of HTR-PM NPP Plant Operation Station (POS) is one of important terms in LSPSA. The definition of POS lays the foundation for LSPSA modeling. POS provides initial and boundary conditions for the following event tree and fault tree model development. The aim of this paper is to describe the state-of-the-art of POS definition for HTR-PM LSPSA. As for the first attempt to the high temperature gas cooled reactor module plant, the methodology and procedure of POS definition refers to the LWR LSPSA guidance, and adds to plant initial status analysis due to the HTR-PM characteristics. A specific set of POS grouping vectors is investigate and suggested for HTR-PM NPP, which reflects the characteristics of plant modularization and on-line refueling. As a result, seven POSs are given according to the grouping vectors at the end of the paper. They will be used to the LSPSA modelling and adjusted if necessary. The papers ’work may provide reference to the analogous NPP LSPSA. (author)

  9. Conceptual design of an integrated information system for safety related analysis of nuclear power plants (IRIS Phase 1)

    International Nuclear Information System (INIS)

    Hofer, K.; Zehnder, P.; Galperin, A.

    1994-01-01

    This report deals with a conceptual design of an integrated information management system, called PSI-IRIS, as needed to assist the analysts for reactor safety related investigations on Swiss nuclear power plants within the project STARS. Performing complicated engineering analyses of an NPP requires storage and manipulation of a large amount of information, both data and knowledge. This information is characterized by its multi-disciplinary nature, complexity, and diversity. The problems caused by inefficient and lengthy manual operations involving the data flow management within the framework of the safety related analysis of an NPP, can be solved by applying computer aided engineering (CAE) principles. These principles are the basis for the design of the integrated information management system PSI-IRIS presented in this report. The basic idea is to create a computerized environment, which includes both database and functional capabilities. The database of the PSI-IRIS consists of two parts, an NPP generic database (GDB) and a collection of analysis results (CASE L IB). The GDB includes all technical plant data and information needed to generate input decks for all computer codes utilized within the STARS project. The CASE L IB storage contains the accumulated knowledge, input decks, and result files of the NPP transient analyses. Considerations and analysis of the data types and the required data manipulation capabilities as well as operational requirements resulted in the choice of an object-oriented database management system (OODBMS) as a development platform for solving the software engineering problems. Several advantages of OODBMS's over conventional relational database management systems were found of crucial importance, especially providing the necessary flexibility for different data types and the potential for extensibility. (author) 15 figs., tabs., 20 refs

  10. Surface Operations Systems Improve Airport Efficiency

    Science.gov (United States)

    2009-01-01

    With Small Business Innovation Research (SBIR) contracts from Ames Research Center, Mosaic ATM of Leesburg, Virginia created software to analyze surface operations at airports. Surface surveillance systems, which report locations every second for thousands of air and ground vehicles, generate massive amounts of data, making gathering and analyzing this information difficult. Mosaic?s Surface Operations Data Analysis and Adaptation (SODAA) tool is an off-line support tool that can analyze how well the airport surface operation is working and can help redesign procedures to improve operations. SODAA helps researchers pinpoint trends and correlations in vast amounts of recorded airport operations data.

  11. An Emperical Analysis of the Corperate Ownership Concentration on the Operation Performance after IPOs of Chinese listed SMEs

    Science.gov (United States)

    Jiming, Li; Xing, Sun

    The purpose of this paper is to investigates whether the large shareholders of small and medium firms (SMEs) take advantage of the inside information and decrease their shares before their operation performance begins to decline after the Initial Public Offerings (IPOs). By using the data from annual reports of SMEs listed on Shenzhen Stock Exchange in China from 2004 to 2006, this study explores both the relationship and the interaction effects between the change of operation performance and the ownership concentration of SMEs around their IPOs. The statistic analysis indicates that there is a significantly positive relationship between the ownership concentration and their operation performance after IPOs during the sample period. Moreover, the companies with higher ownership decreasing encounter more severe operation performance decline, which sugests that the listed companies intend to package their book profits before IPOs for the sake of increasing their issuing prices and enlarge their financing scales.

  12. Improving Civil-Military Information Sharing in Peace Support Operations Using a Service-Oriented Approach

    Science.gov (United States)

    2011-06-01

    solutions that operate reliable under adverse conditions including a bandwidth-limited environment, and provide them with customised information...236 Klein, G. (1998) Sources of Power: How people make decisions, MIT Press, Cambridge, Mass ., USA, 1998 NATO (2007) NATO Architecture Framework

  13. Photokeratoconjunctivitis Symptoms among Informal Welding Operators in North Samarinda, Indonesia

    Directory of Open Access Journals (Sweden)

    Iwan Muhamad Ramdan

    2017-08-01

    Sektor informal telah berkontribusi terhadap perekonomian nasional, namun praktik kesehatan dan keselamatan kerja pada sektor ini masih belum memuaskan. Salah satu usaha sektor informal yang banyak dijumpai di Samarinda Utara adalah usaha pengelasan dengan potensi bahaya utama paparan sinar ultraviolet yang dapat menyebabkan photokeratoconjunctivitis. Penelitian ini bertujuan menginvestigasi kejadian photokeratoconjunctivitis dan faktor yang memengaruhinya pada operator las informal di Kelurahan Samarinda Utara. Penelitian cross-sectional telah dilakukan terhadap 40 responden pada bulan Maret sampai November 2016. Pengumpulan data menggunakan UV detector meter, clamp meter, dan kuesioner. Analisis data menggunakan chi-square, Pearson’s correlation product moment, dan multiple linear regression. Lima puluh persen responden mengalami gejala photokeratoconjunctivitis. Alat pelindung diri (APD (p=0,004, durasi paparan UV (0,056, pengetahuan tentang kesehatan, dan keselamatan kerja (K3 (p=0,055 dan jumlah hari kerja (p=0,001 berhubungan signifikan dengan kejadian photokeratoconjunctivitis. Lokasi kerja (p=0,244, tingkat pendidikan (p=0,680, usia (0,167, intensitas radiasi UV (p=0,206, dan kuat arus las (p=0,085 tidak berhubungan dengan gejala photokeratoconjunctivitis. Simpulan, gejala photokeratoconjunctivitis dipengaruhi oleh penggunaan APD, durasi paparan UV, pengetahuan K3, dan jumlah hari kerja. Faktor yang paling dominan memengaruhi gejala photokeratoconjunctivitis adalah durasi paparan UV.

  14. 17 CFR 249.821 - Form PILOT, information required of self-regulatory organizations operating pilot trading systems...

    Science.gov (United States)

    2010-04-01

    ... required of self-regulatory organizations operating pilot trading systems pursuant to § 240.19b-5 of this... Associations § 249.821 Form PILOT, information required of self-regulatory organizations operating pilot trading systems pursuant to § 240.19b-5 of this chapter. This form shall be used by all self-regulatory...

  15. Simulation-Based Approach to Operating Costs Analysis of Freight Trucking

    Directory of Open Access Journals (Sweden)

    Ozernova Natalja

    2015-12-01

    Full Text Available The article is devoted to the problem of costs uncertainty in road freight transportation services. The article introduces the statistical approach, based on Monte Carlo simulation on spreadsheets, to the analysis of operating costs. The developed model gives an opportunity to estimate operating freight trucking costs under different configuration of cost factors. Important conclusions can be made after running simulations regarding sensitivity to different factors, optimal decisions and variability of operating costs.

  16. The Relationship between Chief Information Officer Transformational Leadership and Computing Platform Operating Systems

    Science.gov (United States)

    Anderson, George W.

    2010-01-01

    The purpose of this study was to relate the strength of Chief Information Officer (CIO) transformational leadership behaviors to 1 of 5 computing platform operating systems (OSs) that may be selected for a firm's Enterprise Resource Planning (ERP) business system. Research shows executive leader behaviors may promote innovation through the use of…

  17. Using cognitive task analysis to inform issues in human systems integration in railroad operations

    Science.gov (United States)

    2013-05-23

    U.S. Railroad operations are undergoing rapid changes involving the introduction of new technologies such as positive train control (PTC), energy management systems (EMS), and electronically controlled pneumatic (ECP) brakes in the locomotive cab. To...

  18. A quantitative assessment method for the NPP operators' diagnosis of accidents

    International Nuclear Information System (INIS)

    Kim, M. C.; Seong, P. H.

    2003-01-01

    In this research, we developed a quantitative model for the operators' diagnosis of the accident situation when an accident occurs in a nuclear power plant. After identifying the occurrence probabilities of accidents, the unavailabilities of various information sources, and the causal relationship between accidents and information sources, Bayesian network is used for the analysis of the change in the occurrence probabilities of accidents as the operators receive the information related to the status of the plant. The developed method is applied to a simple example case and it turned out that the developed method is a systematic quantitative analysis method which can cope with complex relationship between the accidents and information sources and various variables such accident occurrence probabilities and unavailabilities of various information sources

  19. Quantum information density scaling and qubit operation time constraints of CMOS silicon-based quantum computer architectures

    Science.gov (United States)

    Rotta, Davide; Sebastiano, Fabio; Charbon, Edoardo; Prati, Enrico

    2017-06-01

    Even the quantum simulation of an apparently simple molecule such as Fe2S2 requires a considerable number of qubits of the order of 106, while more complex molecules such as alanine (C3H7NO2) require about a hundred times more. In order to assess such a multimillion scale of identical qubits and control lines, the silicon platform seems to be one of the most indicated routes as it naturally provides, together with qubit functionalities, the capability of nanometric, serial, and industrial-quality fabrication. The scaling trend of microelectronic devices predicting that computing power would double every 2 years, known as Moore's law, according to the new slope set after the 32-nm node of 2009, suggests that the technology roadmap will achieve the 3-nm manufacturability limit proposed by Kelly around 2020. Today, circuital quantum information processing architectures are predicted to take advantage from the scalability ensured by silicon technology. However, the maximum amount of quantum information per unit surface that can be stored in silicon-based qubits and the consequent space constraints on qubit operations have never been addressed so far. This represents one of the key parameters toward the implementation of quantum error correction for fault-tolerant quantum information processing and its dependence on the features of the technology node. The maximum quantum information per unit surface virtually storable and controllable in the compact exchange-only silicon double quantum dot qubit architecture is expressed as a function of the complementary metal-oxide-semiconductor technology node, so the size scale optimizing both physical qubit operation time and quantum error correction requirements is assessed by reviewing the physical and technological constraints. According to the requirements imposed by the quantum error correction method and the constraints given by the typical strength of the exchange coupling, we determine the workable operation frequency

  20. Frames and operator theory in analysis and signal processing

    CERN Document Server

    Larson, David R; Nashed, Zuhair; Nguyen, Minh Chuong; Papadakis, Manos

    2008-01-01

    This volume contains articles based on talks presented at the Special Session Frames and Operator Theory in Analysis and Signal Processing, held in San Antonio, Texas, in January of 2006. Recently, the field of frames has undergone tremendous advancement. Most of the work in this field is focused on the design and construction of more versatile frames and frames tailored towards specific applications, e.g., finite dimensional uniform frames for cellular communication. In addition, frames are now becoming a hot topic in mathematical research as a part of many engineering applications, e.g., matching pursuits and greedy algorithms for image and signal processing. Topics covered in this book include: Application of several branches of analysis (e.g., PDEs; Fourier, wavelet, and harmonic analysis; transform techniques; data representations) to industrial and engineering problems, specifically image and signal processing. Theoretical and applied aspects of frames and wavelets. Pure aspects of operator theory empha...

  1. National Waste Repository Novi Han operational safety analysis report. Safety assessment methodology

    International Nuclear Information System (INIS)

    2003-01-01

    The scope of the safety assessment (SA), presented includes: waste management functions (acceptance, conditioning, storage, disposal), inventory (current and expected in the future), hazards (radiological and non-radiological) and normal and accidental modes. The stages in the development of the SA are: criteria selection, information collection, safety analysis and safety assessment documentation. After the review the facilities functions and the national and international requirements, the criteria for safety level assessment are set. As a result from the 2nd stage actual parameters of the facility, necessary for safety analysis are obtained.The methodology is selected on the base of the comparability of the results with the results of previous safety assessments and existing standards and requirements. The procedure and requirements for scenarios selection are described. A radiological hazard categorisation of the facilities is presented. Qualitative hazards and operability analysis is applied. The resulting list of events are subjected to procedure for prioritization by method of 'criticality analysis', so the estimation of the risk is given for each event. The events that fall into category of risk on the boundary of acceptability or are unacceptable are subjected to the next steps of the analysis. As a result the lists with scenarios for PSA and possible design scenarios are established. PSA logical modeling and quantitative calculations of accident sequences are presented

  2. On minimizing the influence of the noise tail of correlation functions in operational modal analysis

    DEFF Research Database (Denmark)

    Tarpø, Marius; Olsen, Peter; Amador, Sandro

    2017-01-01

    on the identification results (random errors) when the noise tail is included in the identification. On the other hand, if the correlation function is truncated too much, then important information is lost. In other to minimize this error, a suitable truncation based on manual inspection of the correlation function......In operational modal analysis (OMA) correlation functions are used by all classical time-domain modal identification techniques that uses the impulse response function (free decays) as primary data. However, the main difference between the impulse response and the correlation functions estimated...... from the operational responses is that the latter present a higher noise level. This is due to statistical errors in the estimation of the correlation function and it causes random noise in the end of the function and this is called the noise tail. This noise might have significant influence...

  3. Information flow analysis of interactome networks.

    Directory of Open Access Journals (Sweden)

    Patrycja Vasilyev Missiuro

    2009-04-01

    Full Text Available Recent studies of cellular networks have revealed modular organizations of genes and proteins. For example, in interactome networks, a module refers to a group of interacting proteins that form molecular complexes and/or biochemical pathways and together mediate a biological process. However, it is still poorly understood how biological information is transmitted between different modules. We have developed information flow analysis, a new computational approach that identifies proteins central to the transmission of biological information throughout the network. In the information flow analysis, we represent an interactome network as an electrical circuit, where interactions are modeled as resistors and proteins as interconnecting junctions. Construing the propagation of biological signals as flow of electrical current, our method calculates an information flow score for every protein. Unlike previous metrics of network centrality such as degree or betweenness that only consider topological features, our approach incorporates confidence scores of protein-protein interactions and automatically considers all possible paths in a network when evaluating the importance of each protein. We apply our method to the interactome networks of Saccharomyces cerevisiae and Caenorhabditis elegans. We find that the likelihood of observing lethality and pleiotropy when a protein is eliminated is positively correlated with the protein's information flow score. Even among proteins of low degree or low betweenness, high information scores serve as a strong predictor of loss-of-function lethality or pleiotropy. The correlation between information flow scores and phenotypes supports our hypothesis that the proteins of high information flow reside in central positions in interactome networks. We also show that the ranks of information flow scores are more consistent than that of betweenness when a large amount of noisy data is added to an interactome. Finally, we

  4. Optimization Methods in Operations Research and Systems Analysis

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 6. Optimization Methods in Operations Research and Systems Analysis. V G Tikekar. Book Review Volume 2 Issue 6 June 1997 pp 91-92. Fulltext. Click here to view fulltext PDF. Permanent link:

  5. Modeling of the Operating Information for System of Logistical Support of the Hardware-software Means of Safety of the Distributed Systems for Data Processing

    Directory of Open Access Journals (Sweden)

    A. A. Durakovsky

    2010-03-01

    Full Text Available The technique of information modeling of processes and procedures making them by preparation of the operating information for system of logistical support of technological processes of operation and service of hardware-software means of safety of the distributed systems of data processing is offered. Procedures of preparation of the operating information for the system of logistical support of APSOB РСОД concern: working out and formalization of algorithm of functioning; construction of model of the functioning, allowing to calculate degree of risk of operation; decomposition of model and classification of its objects for the purpose of the unequivocal description of all elements of the operating information and mutual coordination of relations between information units.

  6. Workshop on The Functional Analysis of Quantum Information Theory : a Collection of Notes Based on Lectures by Gilles Pisier, K. R. Parthasarathy, Vern Paulsen and Andreas Winter

    CERN Document Server

    Gupta, Ved Prakash; Sunder, V S

    2015-01-01

    This book provides readers with a concise introduction to current studies on operator-algebras and their generalizations, operator spaces and operator systems, with a special focus on their application in quantum information science. This basic framework for the mathematical formulation of quantum information can be traced back to the mathematical work of John von Neumann, one of the pioneers of operator algebras, which forms the underpinning of most current mathematical treatments of the quantum theory, besides being one of the most dynamic areas of twentieth century functional analysis. Today, von Neumann’s foresight finds expression in the rapidly growing field of quantum information theory. These notes gather the content of lectures given by a very distinguished group of mathematicians and quantum information theorists, held at the IMSc in Chennai some years ago, and great care has been taken to present the material as a primer on the subject matter. Starting from the basic definitions of operator space...

  7. Operational reactor physics analysis codes (ORPAC)

    International Nuclear Information System (INIS)

    Kumar, Jainendra; Singh, K.P.; Singh, Kanchhi

    2007-07-01

    For efficient, smooth and safe operation of a nuclear research reactor, many reactor physics evaluations are regularly required. As part of reactor core management the important activities are maintaining core reactivity status, core power distribution, xenon estimations, safety evaluation of in-pile irradiation samples and experimental assemblies and assessment of nuclear safety in fuel handling/storage. In-pile irradiation of samples requires a prior estimation of the reactivity load due to the sample, the heating rate and the activity developed in it during irradiation. For the safety of personnel handling irradiated samples the dose rate at the surface of shielded flask housing the irradiated sample should be less than 200 mR/Hr.Therefore, a proper shielding and radioactive cooling of the irradiated sample are required to meet the said requirement. Knowledge of xenon load variation with time (Startup-curve) helps in estimating Xenon override time. Monitoring of power in individual fuel channels during reactor operation is essential to know any abnormal power distribution to avoid unsafe situations. Complexities in the estimation of above mentioned reactor parameters and their frequent requirement compel one to use computer codes to avoid possible human errors. For efficient and quick evaluation of parameters related to reactor operations such as xenon load, critical moderator height and nuclear heating and reactivity load of isotope samples/experimental assembly, a computer code ORPAC (Operational Reactor Physics Analysis Codes) has been developed. This code is being used for regular assessment of reactor physics parameters in Dhruva and Cirus. The code ORPAC written in Visual Basic 6.0 environment incorporates several important operational reactor physics aspects on a single platform with graphical user interfaces (GUI) to make it more user-friendly and presentable. (author)

  8. Cancer Patients' Informational Needs: Qualitative Content Analysis.

    Science.gov (United States)

    Heidari, Haydeh; Mardani-Hamooleh, Marjan

    2016-12-01

    Understanding the informational needs of cancer patients is a requirement to plan any educative care program for them. The aim of this study was to identify Iranian cancer patients' perceptions of informational needs. The study took a qualitative approach. Semi-structured interviews were held with 25 cancer patients in two teaching hospitals in Iran. Transcripts of the interviews underwent conventional content analysis, and categories were extracted. The results came under two main categories: disease-related informational needs and information needs related to daily life. Disease-related informational needs had two subcategories: obtaining information about the nature of disease and obtaining information about disease prognosis. Information needs related to daily life also had two subcategories: obtaining information about healthy lifestyle and obtaining information about regular activities of daily life. The findings provide deep understanding of cancer patients' informational needs in Iran.

  9. Human factors estimation methods using physiological informations

    International Nuclear Information System (INIS)

    Takano, Ken-ichi; Yoshino, Kenji; Nakasa, Hiroyasu

    1984-01-01

    To enhance the operational safety in the nuclear power plant, it is necessary to decrease abnormal phenomena due to human errors. Especially, it is essential to basically understand human behaviors under the work environment for plant maintenance workers, inspectors, and operators. On the above stand point, this paper presents the results of literature survey on the present status of human factors engineering technology applicable to the nuclear power plant and also discussed the following items: (1) Application fields where the ergonomical evaluation is needed for workers safety. (2) Basic methodology for investigating the human performance. (3) Features of the physiological information analysis among various types of ergonomical techniques. (4) Necessary conditions for the application of in-situ physiological measurement to the nuclear power plant. (5) Availability of the physiological information analysis. (6) Effectiveness of the human factors engineering methodology, especially physiological information analysis in the case of application to the nuclear power plant. The above discussions lead to the demonstration of high applicability of the physiological information analysis to nuclear power plant, in order to improve the work performance. (author)

  10. Internet security information system implement method

    International Nuclear Information System (INIS)

    Liu Baoxu; Mei Jie; Xu Rongsheng; An Dehai; Yu Mingjian; Chen Xiangyang; Zheng Peng

    1999-01-01

    On the basis of analysis of the key elements that will affect the Internet Security Information System, the author takes UNIX Operating System as an example, and provides the important stages that must be considered when implementing the Internet Security Information System. An implemental model of the Internet Security Information System is given

  11. Information gathering, management and transfering for geospacial intelligence

    Science.gov (United States)

    Nunes, Paulo; Correia, Anacleto; Teodoro, M. Filomena

    2017-07-01

    Information is a key subject in modern organization operations. The success of joint and combined operations with organizations partners depends on the accurate information and knowledge flow concerning the operations theatre: provision of resources, environment evolution, markets location, where and when an event occurred. As in the past and nowadays we cannot conceive modern operations without maps and geo-spatial information (GI). Information and knowledge management is fundamental to the success of organizational decisions in an uncertainty environment. The georeferenced information management is a process of knowledge management, it begins in the raw data and ends on generating knowledge. GI and intelligence systems allow us to integrate all other forms of intelligence and can be a main platform to process and display geo-spatial-time referenced events. Combining explicit knowledge with peoples know-how to generate a continuous learning cycle that supports real time decisions mitigates the influences of fog of everyday competition and provides the knowledge supremacy. Extending the preliminary analysis done in [1], this work applies the exploratory factor analysis to a questionnaire about the GI and intelligence management in an organization company allowing to identify future lines of action to improve information process sharing and exploration of all the potential of this important resource.

  12. A Strategic Analysis of Information Sharing Among Cyber Attackers

    Directory of Open Access Journals (Sweden)

    Kjell Hausken

    2015-10-01

    Full Text Available We build a game theory model where the market design is such that one firm invests in security to defend against cyber attacks by two hackers. The firm has an asset, which is allocated between the three market participants dependent on their contest success. Each hacker chooses an optimal attack, and they share information with each other about the firm’s vulnerabilities. Each hacker prefers to receive information, but delivering information gives competitive advantage to the other hacker. We find that each hacker’s attack and information sharing are strategic complements while one hacker’s attack and the other hacker’s information sharing are strategic substitutes. As the firm’s unit defense cost increases, the attack is inverse U-shaped and reaches zero, while the firm’s defense and profit decrease, and the hackers’ information sharing and profit increase. The firm’s profit increases in the hackers’ unit cost of attack, while the hackers’ information sharing and profit decrease. Our analysis also reveals the interesting result that the cumulative attack level of the hackers is not affected by the effectiveness of information sharing between them and moreover, is also unaffected by the intensity of joint information sharing. We also find that as the effectiveness of information sharing between hackers increases relative to the investment in attack, the firm’s investment in cyber security defense and profit are constant, the hackers’ investments in attacks decrease, and information sharing levels and hacker profits increase. In contrast, as the intensity of joint information sharing increases, while the firm’s investment in cyber security defense and profit remain constant, the hackers’ investments in attacks increase, and the hackers’ information sharing levels and profits decrease. Increasing the firm’s asset causes all the variables to increase linearly, except information sharing which is constant. We extend

  13. Strategic and operational information watch newsletter nr 1

    International Nuclear Information System (INIS)

    2016-12-01

    This newsletter proposes an overview of events related to security and defence issues in relationship with impacts of climate change. A first part reports a strategic watch which addresses the following topics: the environment taken into account by the International Criminal Court, impacts of climate change on tensions about rural estate in Africa, resolution of the European Parliament on the European Union of Defence, environmental and energy strategy of the Danish Ministry of Defence, COP22 in Marrakech, and so on. The second part reports an operational information watch addresses the threat on the US DoD environmental agenda by the new Trump administration, the adaptation of US forces to climate changes, the threat of climate change on US DoD infrastructures, a US base self-sufficient in energy, NATO actions for energy efficiency, thermal regulation improvement for soldiers, impact of El Nino on the propagation of the Zika virus, launching of the Lancet countdown. The newsletter finally indicates some brief news, events and recent publications

  14. Application of signature analysis for determining the operational readiness of motor-operated valves under blowdown test conditions

    International Nuclear Information System (INIS)

    Haynes, H.D.

    1988-01-01

    In support of the NRC-funded Nuclear Plant Aging Research (NPAR) program, Oak Ridge National Laboratory (ORNL) has carried out a comprehensive aging assessment of Motor-Operated Valves (MOVs). As part of this work, ORNL participated in the Gate Valve Flow Interruption Blowdown (GVFIB) tests carried out in Huntsville, Alabama. The GVFIB tests were intended primarily to determine the behavior of motor-operated gate valves under the temperature, pressure, and flow conditions expected to be experienced by isolation valves in Boiling Water Reactors (BWRs) during a high energy line break (blowdown) outside of containment. In addition, the tests provided an excellent opportunity to evaluate signature analysis methods for determining the operational readiness of the MOVs under those accident conditions. ORNL acquired motor current and torque switch shaft angular position data on two test MOVs during various times of the GVFIB tests. The reduction in operating ''margin'' of both MOVs due to the presence of additional valve running loads imposed by high flow was clearly observed in motor current and torque switch angular position signatures. In addition, the effects of differential pressure, fluid temperature, and line voltage on MOV operations were observed and more clearly understood as a result of utilizing signature analysis techniques. 1 ref.; 16 figs

  15. U.S. Geological Survey Streamgage Operation and Maintenance Cost Evaluation...from the National Streamflow Information Program

    Science.gov (United States)

    Norris, J. Michael

    2010-01-01

    To help meet the goal of providing earth-science information to the Nation, the U.S. Geological Survey (USGS) operates and maintains the largest streamgage network in the world, with over 7,600 active streamgages in 2010. This network is operated in cooperation with over 850 Federal, tribal, State, and local funding partners. The streamflow information provided by the USGS is used for the protection of life and property; for the assessment, allocation, and management of water resources; for the design of roads, bridges, dams, and water works; for the delineation of flood plains; for the assessment and evaluation of habitat; for understanding the effects of land-use, water-use, and climate changes; for evaluation of water quality; and for recreational safety and enjoyment. USGS streamgages are managed and operated to rigorous national standards, allowing analyses of data from streamgages in different areas and spanning long time periods, some with more than 100 years of data. About 90 percent of USGS streamgages provide streamflow information real-time on the web. Physical measurements of streamflow are made at streamgages multiple times a year, depending on flow conditions, to ensure the highest level of accuracy possible. In addition, multiple reviews and quality assurance checks are performed before the data is finalized. In 2006, the USGS reviewed all activities, operations, equipment, support, and costs associated with operating and maintaining a streamgage program (Norris and others, 2008). A summary of the percentages of costs associated with activities required to operate a streamgage on an annual basis are presented in figure 1. This information represents what it costs to fund a 'typical' USGS streamgage and how those funds are utilized. It should be noted that some USGS streamgages have higher percentages for some categories than do others depending on location and conditions. Forty-one percent of the funding for the typical USGS streamgage is for labor

  16. Preliminary Findings from an Analysis of Building Energy Information System Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Granderson, Jessica; Piette, Mary Ann; Ghatikar, Girish; Price, Philip

    2009-06-01

    Energy information systems comprise software, data acquisition hardware, and communication systems that are intended to provide energy information to building energy and facilities managers, financial managers, and utilities. This technology has been commercially available for over a decade, however recent advances in Internet and other information technology, and analytical features have expanded the number of product options that are available. For example, features such as green house gas tracking, configurable energy analyses and enhanced interoperability are becoming increasingly common. Energy information systems are used in a variety of commercial buildings operations and environments, and can be characterized in a number of ways. Basic elements of these systems include web-based energy monitoring, web-based energy management linked to controls, demand response, and enterprise energy management applications. However the sheer number and variety of available systems complicate the selection of products to match the needs of a given user. In response, a framework was developed to define the capabilities of different types of energy information systems, and was applied to characterize approximately 30 technologies. Measurement is a critical component in managing energy consumption and energy information must be shared at all organizational levels to maintain persistent, efficient operations. Energy information systems are important to understand because they offer the analytical support to process measured data into information, and they provide the informational link between the primary actors who impact building energy efficiency - operators, facilities and energy managers, owners and corporate decision makers. In this paper, preliminary findings are presented, with a focus on overall trends and the general state of the technology. Key conclusions include the need to further pursue standardization and usability, x-y plotting as an under-supported feature, and

  17. Office for Analysis and Evaluation of Operational Data 1993 annual report: Volume 8, Number 1

    International Nuclear Information System (INIS)

    1994-11-01

    This annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) describes activities conducted during 1993. The report is published in two parts. NUREG-1272, Vol. 8, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC's Operations Center. NUREG-1272, Vol. 8, No. 2, covers nuclear materials and presents a review of the events and concerns during 1993 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Both reports also contain a discussion of the Incident Investigation Team program and summarize both the Incident Investigation Team and Augmented Inspection Team reports. Each volume contains a list of the AEOD reports issued from 1980 through 1993

  18. The system for statistical analysis of logistic information

    Directory of Open Access Journals (Sweden)

    Khayrullin Rustam Zinnatullovich

    2015-05-01

    Full Text Available The current problem for managers in logistic and trading companies is the task of improving the operational business performance and developing the logistics support of sales. The development of logistics sales supposes development and implementation of a set of works for the development of the existing warehouse facilities, including both a detailed description of the work performed, and the timing of their implementation. Logistics engineering of warehouse complex includes such tasks as: determining the number and the types of technological zones, calculation of the required number of loading-unloading places, development of storage structures, development and pre-sales preparation zones, development of specifications of storage types, selection of loading-unloading equipment, detailed planning of warehouse logistics system, creation of architectural-planning decisions, selection of information-processing equipment, etc. The currently used ERP and WMS systems did not allow us to solve the full list of logistics engineering problems. In this regard, the development of specialized software products, taking into account the specifics of warehouse logistics, and subsequent integration of these software with ERP and WMS systems seems to be a current task. In this paper we suggest a system of statistical analysis of logistics information, designed to meet the challenges of logistics engineering and planning. The system is based on the methods of statistical data processing.The proposed specialized software is designed to improve the efficiency of the operating business and the development of logistics support of sales. The system is based on the methods of statistical data processing, the methods of assessment and prediction of logistics performance, the methods for the determination and calculation of the data required for registration, storage and processing of metal products, as well as the methods for planning the reconstruction and development

  19. Exploring health information technology education: an analysis of the research.

    Science.gov (United States)

    Virgona, Thomas

    2012-01-01

    This article is an analysis of the Health Information Technology Education published research. The purpose of this study was to examine selected literature using variables such as journal frequency, keyword analysis, universities associated with the research and geographic diversity. The analysis presented in this paper has identified intellectually significant studies that have contributed to the development and accumulation of intellectual wealth of Health Information Technology. The keyword analysis suggests that Health Information Technology research has evolved from establishing concepts and domains of health information systems, technology and management to contemporary issues such as education, outsourcing, web services and security. The research findings have implications for educators, researchers, journal.

  20. A Concept Analysis of Fully Informed: Breastfeeding Promotion

    Science.gov (United States)

    2005-12-21

    updated breastfeeding policy statement, the American Academy of Pediatrics 3 ( AAP , 2005) identified the compelling advantages of breastfeeding and urged...healthcare 4 professionals to implement principles to promote breastfeeding . The AAP cited obstacles 5 to the initiation and continuation of...Analysis of Fully Informed 2 14 A Concept Analysis of Fully Informed: Breastfeeding Promotion 15 In February 2005, the American Academy of Pediatrics ( AAP

  1. Guidance for preparation of safety analysis reports for nonreactor facilities and operations

    International Nuclear Information System (INIS)

    1992-01-01

    Department of Energy (DOE) Orders 5480.23, ''Nuclear Safety Analysis Reports,'' and 5481.1B, ''Safety Analysis and Review System'' require the preparation of appropriate safety analyses for each DOE operation and subsequent significant modifications including decommissioning, and independent review of each safety analysis. The purpose of this guide is to assist in the preparation and review of safety documentation for Oak Ridge Field Office (OR) nonreactor facilities and operation. Appendix A lists DOE Orders, NRC Regulatory Guides and other documents applicable to the preparation of safety analysis reports

  2. Surface Operations Data Analysis and Adaptation Tool, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — This effort undertook the creation of a Surface Operations Data Analysis and Adaptation (SODAA) tool to store data relevant to airport surface research and...

  3. AUTHENTICATION ALGORITHM FOR PARTICIPANTS OF INFORMATION INTEROPERABILITY IN PROCESS OF OPERATING SYSTEM REMOTE LOADING ON THIN CLIENT

    Directory of Open Access Journals (Sweden)

    Y. A. Gatchin

    2016-05-01

    Full Text Available Subject of Research.This paper presents solution of authentication problem for all components of information interoperabilityin process of operation system network loading on thin client from terminal server. System Definition. In the proposed solution operation system integrity check is made by hardware-software module, including USB-token with protected memory for secure storage of cryptographic keys and loader. The key requirement for the solution is mutual authentication of four participants: terminal server, thin client, token and user. We have created two algorithms for the problem solution. The first of the designed algorithms compares the encrypted one-time password (random number with the reference value stored in the memory of the token and updates this number in case of successful authentication. The second algorithm uses the public and private keys of the token and the server. As a result of cryptographic transformation, participants are authenticated and the secure channel is formed between the token, thin client and terminal server. Main Results. Additional research was carried out to find out if the designed algorithms meet the necessary requirements. Criteria used included applicability in a multi-access terminal system architecture, potential threats evaluation and overall system security. According to analysis results, it is recommended to use the algorithm based on PKI due to its high scalability and usability. High level of data security is proved as a result of asymmetric cryptography application with the guarantee that participants' private keys are never sent in the authentication process. Practical Relevance. The designed PKI-based algorithm allows solving the problem with the use of cryptographic algorithms according to state standard even in its absence on asymmetric cryptography. Thus, it can be applied in the State Information Systems with increased requirements to information security.

  4. Exposure Based Health Issues Project Report: Phase I of High Level Tank Operations, Retrieval, Pretreatment, and Vitrification Exposure Based Health Issues Analysis

    International Nuclear Information System (INIS)

    Stenner, Robert D.; Bowers, Harold N.; Kenoyer, Judson L.; Strenge, Dennis L.; Brady, William H.; Ladue, Buffi; Samuels, Joseph K.

    2001-01-01

    The Department of Energy (DOE) has the responsibility to understand the ''big picture'' of worker health and safety which includes fully recognizing the vulnerabilities and associated programs necessary to protect workers at the various DOE sites across the complex. Exposure analysis and medical surveillance are key aspects for understanding this big picture, as is understanding current health and safety practices and how they may need to change to relate to future health and safety management needs. The exposure-based health issues project was initiated to assemble the components necessary to understand potential exposure situations and their medical surveillance and clinical aspects. Phase I focused only on current Hanford tank farm operations and serves as a starting point for the overall project. It is also anticipated that once the pilot is fully developed for Hanford HLW (i.e., current operations, retrieval, pretreatment, vitrification, and disposal), the process and analysis methods developed will be available and applicable for other DOE operations and sites. The purpose of this Phase I project report is to present the health impact information collected regarding ongoing tank waste maintenance operations, show the various aspects of health and safety involved in protecting workers, introduce the reader to the kinds of information that will need to be analyzed in order to effectively manage worker safety

  5. Report to the US Nuclear Regulatory Commission on analysis and evaluation of operational data - 1987: Power reactors

    Energy Technology Data Exchange (ETDEWEB)

    None

    1988-10-01

    This annual report of the US Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data (AEOD) is devoted to the activities performed during 1987. The report is published in two volumes. NUREG-1272, Vol. 2, No. 1, covers Power Reactors and presents an overview of the operating experience of the nuclear power industry, with comments regarding the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year, and summarizes information from Licensee Event Reports, the NRC's Operations Center, and Diagnostic Evaluations. NUREG-1272, Vol. 2, No. 2, covers Nonreactors and presents a review of the nonreactors events and misadministration reports that were reported in 1987 and a brief synopsis of AEOD studies published in 1987. Each volume contains a list of the AEOD Reports issued for 1980-1987.

  6. Change detection in bi-temporal data by canonical information analysis

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg; Vestergaard, Jacob Schack

    2015-01-01

    combinations with the information theoretical measure mutual information (MI). We term this type of analysis canonical information analysis (CIA). MI allows for the actual joint distribution of the variables involved and not just second order statistics. Where CCA is ideal for Gaussian data, CIA facilitates...

  7. An analysis of HANARO operating performance of the year 2001

    International Nuclear Information System (INIS)

    Yoon, D. B.; Choi, H. Y.; Lim, I. C.; Hwang, S. Y.

    2002-01-01

    For the evaluation of operating performance of the HANARO, operation data of the year 2001 were analyzed. Power output, delay times for full-power arrival and shutdown were considered as the representative measures of operating performance. The analysis results show that the total thermal power output is 3770MWD, which is the best record since the startup of the HANARO. The mean values of the delay time for full-power arrival and shutdown are calculated as 3.56 hours and 2.49 hours, respectively. The major causes for the delay of full-power arrival and shutdown are found to be the retardation of the fuel inspection, and unscheduled work for maintenance and experiment. In order to enhance the operating performance, based on the analysis results, biweekly-prearranged plan for working and experiment will be prepared in advance. The starting time of the reactor has been moved up by 1 hour for reaching the full power before the scheduled time. In addition, we will make effort so as to reduce the number of fuels that have to be inspected

  8. Human Factors for Situation Assessment in Grid Operations

    Energy Technology Data Exchange (ETDEWEB)

    Guttromson, Ross T.; Schur, Anne; Greitzer, Frank L.; Paget, Mia L.

    2007-08-08

    Executive Summary Despite advances in technology, power system operators must assimilate overwhelming amounts of data to keep the grid operating. Analyses of recent blackouts have clearly demonstrated the need to enhance the operator’s situation awareness (SA). The long-term objective of this research is to integrate valuable technologies into the grid operator environment that support decision making under normal and abnormal operating conditions and remove non-technical barriers to enable the optimum use of these technologies by individuals working alone and as a team. More specifically, the research aims to identify methods and principles to increase SA of grid operators in the context of system conditions that are representative or common across many operating entities and develop operationally relevant experimental methods for studying technologies and operational practices which contribute to SA. With increasing complexity and interconnectivity of the grid, the scope and complexity of situation awareness have grown. New paradigms are needed to guide research and tool development aimed to enhance and improve operations. In reviewing related research, operating practices, systems, and tools, the present study established a taxonomy that provides a perspective on research and development surrounding power grid situation awareness and clarifies the field of human factors/SA for grid operations. Information sources that we used to identify critical factors underlying SA included interviews with experienced operational personnel, available historical summaries and transcripts of abnormal conditions and outages (e.g., the August 14, 2003 blackout), scientific literature, and operational policies/procedures and other documentation. Our analysis of August 2003 blackout transcripts and interviews adopted a different perspective than previous analyses of this material, and we complemented this analysis with additional interviews. Based on our analysis and a broad

  9. The application of an event data store to safe operation

    International Nuclear Information System (INIS)

    Bowen, J.H.

    1977-01-01

    The problem has been considered of how those responsible in Industry could attempt to demonstrate the degree of safety which the First Report of the Major Hazard Committee in the U.K. indicated as a minimum for the public at large. Reliance on Codes of Practice appears inappropriate at this point in time. Documentary evidence on the lines of a Hazard Analysis, quantified with generalised failure data as obtainable from a Data Bank, is likewise rejected as not conveying sufficient confidence. The recommended approach would include Hazard Analysis as an essential feature; but would envisage a feedback of information from the early operations of the actual plant to update in Bayesian fashion the estimates, and to revise and review major assumptions about plant management and control, using techniques of multivariate analysis. Correlation of failure information from many 'similar' plants is recommended. The extension of Data Banks to include information of a more operational type is recommended; and, preferably in conjunction with this, techniques of operational research should be applied to test correct parametrization. Progress on all these aspects is reported. (orig.) [de

  10. Information management system for design, construction and operation of nuclear power plants

    International Nuclear Information System (INIS)

    Bolch, M.C.; Jones, C.R.

    1990-01-01

    This paper describes the principal requirements and features of a computerized information management system (IMS) believed to be a necessary part of the program to design, build and operate the next generation of nuclear power plants in the United States. This way a result of extensive review and input from an industry group studying future nuclear power plant construction improvements. The needs of the power plant constructor, owner and operator for such a computerized technical data base are described in terms of applications and scope and timing of turnover of the IMS by the plant designer. The applications cover the full life cycle of the plant including project control, construction activities, quality control, maintenance and operation. The scope of the IMS is also described in terms of the technical data to be included, hardware and software capabilities and training. The responsibilities of the plant designer for developing the IMS and generating the technical data base is defined as part of the plant process. The requirements to be met include a comprehensive plant data model and computer system hardware and software

  11. Information management system for design, construction and operation of nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Bolch, M.C. (Duke Power Co. (US)); Jones, C.R. (S. Levy Inc. (US))

    1990-01-01

    This paper describes the principal requirements and features of a computerized information management system (IMS) believed to be a necessary part of the program to design, build and operate the next generation of nuclear power plants in the United States. This way a result of extensive review and input from an industry group studying future nuclear power plant construction improvements. The needs of the power plant constructor, owner and operator for such a computerized technical data base are described in terms of applications and scope and timing of turnover of the IMS by the plant designer. The applications cover the full life cycle of the plant including project control, construction activities, quality control, maintenance and operation. The scope of the IMS is also described in terms of the technical data to be included, hardware and software capabilities and training. The responsibilities of the plant designer for developing the IMS and generating the technical data base is defined as part of the plant process. The requirements to be met include a comprehensive plant data model and computer system hardware and software.

  12. Analysis of operating experience of nuclear power plants

    International Nuclear Information System (INIS)

    Volta, G.; Amesz, J.; Mancini, G.

    1981-01-01

    The power reactors operating experience has been matter for studies at the Joint Research Centre of the C.E.C. with the aim of validating probabilistic analysis models and of setting up data banks concerning reliability, availability of components and systems and safety related events. The report shows problems encountered and solutions given to attain the goal. For what concerns validation, the need of more satisfactory models that could handle both the technical and the organizational aspects of an operating plant is shown. For what concerns the data banks the possibilities opened by a coherent international system of classification are underlined. (author)

  13. Concern for pain in the pre-operative period- is the internet being used for information by patients?

    Science.gov (United States)

    Kurup, Viji; Dabu-Bondoc, Susan; Senior, Audrey; Dai, Feng; Hersey, Denise; Vadivelu, Nalini

    2014-02-01

    This study was conducted to provide information regarding prevalence of pain, type of provider managing pain, and use of Internet for information regarding pain, among patients coming for presurgical anesthesia consultation at a major academic institution. With IRB approval, patients were invited to participate in a voluntary and anonymous 14 question survey given to them when they presented for anesthesia consultation prior to their surgical procedure. The qualitative/categorical data were summarized by number (percentage [%]) and analyzed by Chi-square test or Fisher's exact test as appropriate. All data analyses were performed using the statistical software SAS, v9.2. A total of 1039 patients were asked to complete the survey and 670 patients returned their responses (response rate = 64.5%). 83% of patients had a history of prior surgery. 57% were concerned about postoperative pain. 30% of patients had chronic pain for more than 3 months pre-operatively. 16% of patients had looked online for information regarding pain. Pain physicians were involved in pain management only in 3.8% of these patients. Patients are presenting for surgery with significant pre-operative pain issues. Knowing this information pre-operatively will help healthcare personnel manage postsurgical pain more effectively. Patients are also using the Internet to obtain information regarding pain. As providers, there may be value to directing patients to reliable information online during consultation. As all physicians will eventually be managing chronic pain in their patients, pain education should be given priority in medical school curriculum. © 2013 World Institute of Pain.

  14. Quantifying and managing uncertainty in operational modal analysis

    Science.gov (United States)

    Au, Siu-Kui; Brownjohn, James M. W.; Mottershead, John E.

    2018-03-01

    Operational modal analysis aims at identifying the modal properties (natural frequency, damping, etc.) of a structure using only the (output) vibration response measured under ambient conditions. Highly economical and feasible, it is becoming a common practice in full-scale vibration testing. In the absence of (input) loading information, however, the modal properties have significantly higher uncertainty than their counterparts identified from free or forced vibration (known input) tests. Mastering the relationship between identification uncertainty and test configuration is of great interest to both scientists and engineers, e.g., for achievable precision limits and test planning/budgeting. Addressing this challenge beyond the current state-of-the-art that are mostly concerned with identification algorithms, this work obtains closed form analytical expressions for the identification uncertainty (variance) of modal parameters that fundamentally explains the effect of test configuration. Collectively referred as 'uncertainty laws', these expressions are asymptotically correct for well-separated modes, small damping and long data; and are applicable under non-asymptotic situations. They provide a scientific basis for planning and standardization of ambient vibration tests, where factors such as channel noise, sensor number and location can be quantitatively accounted for. The work is reported comprehensively with verification through synthetic and experimental data (laboratory and field), scientific implications and practical guidelines for planning ambient vibration tests.

  15. Guideline for regulatory agencies in evaluating contents of root cause analysis by operators

    International Nuclear Information System (INIS)

    Hata, Takaya; Makino, Maomi; Kosaka, Atsuhiko

    2008-01-01

    'Guideline for Regulatory Agencies in Evaluating Contents of Root cause Analysis by Operators' was enacted as the policy for new inspection system in Japan. The objective is to indicate the view point to verify the appropriateness of the corrective actions and preventive actions implemented by operators based on root cause analysis and its analysis results. This guideline is leading to take four points into special consideration for adequate application. They are encouragement of further activities of the operators, flexible interpretation of the intention, versatility of the analysis methods and concepts and consideration of no blame culture. Moreover, as view point for regulatory agencies, it indicates with special emphasis that neutrality of the analyzing party, objectivity of analysis result, and logicality of the analysis method are ensured. This guideline shall be continuously reviewed through integration of lessons learned from active use in future. (author)

  16. An Urban-Spatial Analysis of the Women in the Informal Sectors of Greater Guwahati City of Assam, India

    Directory of Open Access Journals (Sweden)

    Zona Bhuyan

    2013-05-01

    Full Text Available This article reflects the use of urban space by women in urban informal sectors in the city of Guwahati located in North East India. The population influx from across the borders in the aftermath of the partition has huge implications both on polity and on economy of the northeastern states in general and Assam in particular.  Importantly, the urban informal sectors have a sizeable share in terms of its significant contributions towards Gross Domestic Product (GDP as well as generation of employment opportunities largely. Using a feminist perspective, the research is an attempt to investigate the engagement of women in the informal sector in greater Guwahati. Research findings reveal that the occupations of the women workers are location-specific, that is, the manufacturing sectors (textiles, food preparation, printing and skilled service are mainly home/shop based production (fixed locations whereas the service sectors (leisure, caring, elementary construction, elementary sales and cleaning occupation operate at variable locations (construction sites, street pavements, marketplaces and other various locations. Further analysis shows that the informal sector is highly demand dependent and such demands are in the central business areas of the city, therefore informal sector services (skilled services and elementary services are found to be located in and around the central areas of Guwahati city. Women operators in the informal sector are attracted to the central business district because of the many advantages that it enjoys relative to other parts of a city. The paper concludes by calling on policy makers and physical planning agencies to evolve more pragmatic strategies for urban development matters in order that urban informal sector activities can be integrated into urban development plans. Finally, further research is called for on how urban planners could redesign the urban space with appropriate consideration of the informal sector

  17. Three dimensional visualization breakthrough in analysis and communication of technical information for nuclear waste management

    International Nuclear Information System (INIS)

    Alexander, D.H.; Cerny, B.A.; Hill, E.R.; Krupka, K.M.; Smoot, J.L.; Smith, D.R.; Waldo, K.

    1990-11-01

    Computer graphics systems that provide interactive display and manipulation of three-dimensional data are powerful tools for the analysis and communication of technical information required for characterization and design of a geologic repository for nuclear waste. Greater understanding of site performance and repository design information is possible when performance-assessment modeling results can be visually analyzed in relation to site geologic and hydrologic information and engineering data for surface and subsurface facilities. In turn, this enhanced visualization capability provides better communication between technical staff and program management with respect to analysis of available information and prioritization of program planning. A commercially-available computer system was used to demonstrate some of the current technology for three-dimensional visualization within the architecture of systems for nuclear waste management. This computer system was used to interactively visualize and analyze the information for two examples: (1) site-characterization and engineering data for a potential geologic repository at Yucca Mountain, Nevada; and (2) three-dimensional simulations of a hypothetical release and transport of contaminants from a source of radionuclides to the vadose zone. Users may assess the three-dimensional distribution of data and modeling results by interactive zooming, rotating, slicing, and peeling operations. For those parts of the database where information is sparse or not available, the software incorporates models for the interpolation and extrapolation of data over the three-dimensional space of interest. 12 refs., 4 figs

  18. MILITARY OPERATIONS IN THE INFORMATION AGE: PUTTING THE COGNITIVE DOMAIN ON TOP

    Science.gov (United States)

    2017-04-06

    social media . Although information and the power of influence is recognized as an important component of the diplomatic instrument of national power...operational level for surveillance but it is not only an opportunity to better understand the battlespace but also to influence it. Social media was...to use messaging to influence on the internet and through social media , it is important to study and employ proven methods to ensure the messages are

  19. System and operations concept for the Geostationary Earth Observatory data and information system

    International Nuclear Information System (INIS)

    Weinstein, F.C.; Messing, F.; Armstead, A.

    1992-03-01

    The Geostationary Earth Observatory (GEO) Data and Information System (GEODIS) is a critical element in achieving GEO program goals. GEODIS must collect, process, and disseminate scientific data to meet the challenges of NASA's Mission to Planet Earth. The system and operations concept for GEODIS described here summarizes its principal functional elements and external interfaces. GEODIS operations include mission support (of the GEO platform and instruments), data production (of multiple levels of products derived from GEO sensor data), user support (in accessing this data both from archives and directly via satellite rebroadcast links), and institutional support (for communications, management, development, and testing). This concept is part of a baseline generated for Marshall Space Flight Center to define the preliminary architecture of GEODIS. After validation by scientists, managers, operators, and developers, these concepts may be used to guide future work in defining detailed requirements and designs for GEODIS. 6 refs

  20. 78 FR 70163 - Communication of Operational Information between Natural Gas Pipelines and Electric Transmission...

    Science.gov (United States)

    2013-11-22

    ... Street NE., Washington, DC 20426, (202) 502-8931, [email protected] . Anna Fernandez (Legal Information), Office of the General Counsel, 888 First Street NE., Washington, DC 20426, (202) 502-6682, anna.... Questions Posed by the Commission 100. A. Generator to Electric Transmission Operator 100. Communications 1...