Industrial safety: its structuring and content

International Nuclear Information System (INIS)

Munoz, A.; Rodriguez, J.; Martinez-Val, J.M.

1999-01-01

Industrial development has led to an on-going increase in productivity, but the concept of safety has also become highly relevant. In this article, the authors address the structuring and content of industrial safety which involves laying down essential safety requirements, both in manufacturing and processes and in products. (Author)

Industrial hazard and safety handbook

CERN Document Server

King, Ralph W

1979-01-01

Industrial Hazard and Safety Handbook (Revised Impression) describes and exposes the main hazards found in industry, with emphasis on how these hazards arise, are ignored, are identified, are eliminated, or are controlled. These hazard conditions can be due to human stresses (for example, insomnia), unsatisfactory working environments, as well as secret industrial processes. The book reviews the cost of accidents, human factors, inspections, insurance, legal aspects, planning for major emergencies, organization, and safety measures. The text discusses regulations, codes of practice, site layou

Upgrading safety systems of industrial irradiation facilities

International Nuclear Information System (INIS)

Gomes, R.S.; Gomes, J.D.R.L.; Costa, E.L.C.; Costa, M.L.L.; Thomé, Z.D.

2017-01-01

The first industrial irradiation facility in operation in Brazil was designed in the 70s. Nowadays, twelve commercial and research facilities are in operation and two already decommissioned. Minor modifications and upgrades, as sensors replacement, have been introduced in these facilities, in order to reduce the technological gap in the control and safety systems. The safety systems are designed in agreement with the codes and standards at the time. Since then, new standards, codes and recommendations, as well as lessons learned from accidents, have been issued by various international committees or regulatory bodies. The rapid advance of the industry makes the safety equipment used in the original construction become obsolete. The decreasing demand for these older products means that they are no longer produced, which can make it impossible or costly to obtain spare parts and the expansion of legacy systems to include new features. This work aims to evaluate existing safety systems at Brazilian irradiation facilities, mainly the oldest facilities, taking into account the recommended IAEA's design requirements. Irrespective of the fact that during its operational period no event with victims have been recorded in Brazilian facilities, and that the regulatory inspections do not present any serious deviations regarding the safety procedures, it is necessary an assessment of safety system with the purpose of bringing their systems to 'the state of the art', avoiding their rapid obsolescence. This study has also taken into account the knowledge, concepts and solutions developed to upgrading safety system in irradiation facilities throughout the world. (author)

Upgrading safety systems of industrial irradiation facilities

Energy Technology Data Exchange (ETDEWEB)

Gomes, R.S.; Gomes, J.D.R.L.; Costa, E.L.C.; Costa, M.L.L., E-mail: rogeriog@cnen.gov.br, E-mail: jlopes@cnen.gov.br, E-mail: evaldo@cnen.gov.br, E-mail: mara@cnen.gov.br [Comissão Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil). Diretoria de Radioproteção e Segurança Nuclear; Thomé, Z.D., E-mail: zielithome@gmail.com [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Seção de Engenharia Nuclear

2017-07-01

The first industrial irradiation facility in operation in Brazil was designed in the 70s. Nowadays, twelve commercial and research facilities are in operation and two already decommissioned. Minor modifications and upgrades, as sensors replacement, have been introduced in these facilities, in order to reduce the technological gap in the control and safety systems. The safety systems are designed in agreement with the codes and standards at the time. Since then, new standards, codes and recommendations, as well as lessons learned from accidents, have been issued by various international committees or regulatory bodies. The rapid advance of the industry makes the safety equipment used in the original construction become obsolete. The decreasing demand for these older products means that they are no longer produced, which can make it impossible or costly to obtain spare parts and the expansion of legacy systems to include new features. This work aims to evaluate existing safety systems at Brazilian irradiation facilities, mainly the oldest facilities, taking into account the recommended IAEA's design requirements. Irrespective of the fact that during its operational period no event with victims have been recorded in Brazilian facilities, and that the regulatory inspections do not present any serious deviations regarding the safety procedures, it is necessary an assessment of safety system with the purpose of bringing their systems to 'the state of the art', avoiding their rapid obsolescence. This study has also taken into account the knowledge, concepts and solutions developed to upgrading safety system in irradiation facilities throughout the world. (author)

A multi-agent safety response model in the construction industry.

Science.gov (United States)

Meliá, José L

2015-01-01

The construction industry is one of the sectors with the highest accident rates and the most serious accidents. A multi-agent safety response approach allows a useful diagnostic tool in order to understand factors affecting risk and accidents. The special features of the construction sector can influence the relationships among safety responses along the model of safety influences. The purpose of this paper is to test a model explaining risk and work-related accidents in the construction industry as a result of the safety responses of the organization, the supervisors, the co-workers and the worker. 374 construction employees belonging to 64 small Spanish construction companies working for two main companies participated in the study. Safety responses were measured using a 45-item Likert-type questionnaire. The structure of the measure was analyzed using factor analysis and the model of effects was tested using a structural equation model. Factor analysis clearly identifies the multi-agent safety dimensions hypothesized. The proposed safety response model of work-related accidents, involving construction specific results, showed a good fit. The multi-agent safety response approach to safety climate is a useful framework for the assessment of organizational and behavioral risks in construction.

Industrial safety, origins and current situation

International Nuclear Information System (INIS)

Gil Sarralbo, J. F.

2011-01-01

Basic Introduction to Industrial Safety, purpose and expected outcome. Concepts and fundamental principles that support it. Brief overview of its evolution over the course of history. The current legal basis in Spain for Industrial Safety. (Author) 4 refs.

Risk and safety in the nuclear industry and conventional norms of society

International Nuclear Information System (INIS)

Tadmor, J.

In the present study the societal acceptance of various risks is analyzed and rules of risk acceptance as a function of different parameters are spelled out. The monetary value of a human life is estimated, based on investments in safety of different human activities. The acceptable risks and safety investments in different human activities are then compared with risks and safety investments of the nuclear industry. Safety investments required to reduce the radioactivity releases and risks from nuclear power stations to ALAP levels are taken as a study case. It is found that risks in the nuclear industry are several orders of magnitude lower and safety investments per human life saved are several orders of magnitude higher, as compared with risks and safety investments in other human activities. It is also shown that the incremental safety investments needed to further reduce the radiation doses in the environment during normal and continuous operation of nuclear plants are extravagantly high as compared to safety investments in other human activities and in other facets of human life. Considering that there is a limit to the economic means available, societal expenditures for reducing risks should by spread, as much as possible, over all human activities to get the maximum return from investments. (B.G.)

Modernization of safety system for the radiation facility for industrial sterilization

International Nuclear Information System (INIS)

Drndarevic, V.; Djuric, D.; Koturovic, A.; Arandjelovic, M.; Mikic, R.

1995-01-01

Modernization of the existing safety system of the radiation facility for industrial sterilization at the Vinca Institute of nuclear science is done. In order to improve radiation safety of the facility, the latest recommendations and requirements of IAEA have been implemented. Concept and design of the modernized system are presented. The new elements of the safety system are described and the improvements achieved by means of this modernization are pointed out. (author)

Learning from safety in other industries

NARCIS (Netherlands)

Terwel, K.C.; Zwaard, W

2012-01-01

The Dutch building industry has been shocked by some major structural accidents during the last 10 years with buildings during construction as well as with delivered buildings. Several initiatives were started to improve the safety. In other industries the safety awareness seemed to be more

Safety-Culture Exploration in Taiwan’s Metal Industries: Identifying the Workers’ Background Influence on Safety Climate

Directory of Open Access Journals (Sweden)

Shu-Chiang Lin

2017-10-01

Full Text Available The present study aims to assess the safety-climate level in Taiwan’s metal industries, as well as to identify the influence of workers’ backgrounds on the safety climate. An earlier report showed that a poor safety culture was related to the cause of accidents in Taiwan’s traditional manufacturing industries. This study surveyed a total of 839 workers who voluntarily participated and completed the safety-culture questionnaires. These workers were from a Taiwanese metal company and its five satellite companies. Three safety-climate factors, namely safety perception, safety communication and safety-management systems, were assessed. Confirmatory factor analysis (CFA was conducted by developing structural equation modeling to ensure the questionnaire’s validity. The influence of workers’ backgrounds on the safety climate was identified by using one-way ANOVA. The reliability result of the questionnaire was above the acceptable level. The overall safety-climate score was 4.22 out of a five-point scale for safety perception, 4.23 for safety-management systems and 3.97 for safety communication. The scores indicate a good level of safety climate, with room for improvement in safety communication. Additionally, the influence of workers’ backgrounds on the safety climate was confirmed. Based on the validity test, it was also found that the questionnaire could be improved by reconstructing its questions in its development process in order to increase the safety-climate model’s reliability and validity, as well as its model fit.

Advances in industrial ergonomics and safety I

Energy Technology Data Exchange (ETDEWEB)

Mital, A. (ed.) (University of Cincinnati, Cincinnati, OH (USA). Dept. of Mechanical and Industrial Engineering, Ergonomics Research Lab.)

1989-01-01

125 papers are presented under the session headings: industrial ergonomics - programs and applications; applied work physiology; occupational biomechanics; engineering anthropometry; work and protective clothing; hand tools; human-computer interface; theory and practice of industrial safety; human perception and performance; human strengths; industrial noise and vibration; machine guarding and industrial machine safety; manual materials handling; modelling for safety and health; occupational injuries and health problems; policies and standards; quality control and inspection; rehabilitation and designing for the disabled; work duration and fatigue; and work and work place design. Includes papers on static and dynamic back strength of underground coal miners, and slip and fall accidents during equipment maintenance in the surface mining industry.

IMPLEMENTATION OF A SAFETY PROGRAM FOR THE WORK ACCIDENTS’ CONTROL. A CASE STUDY IN THE CHEMICAL INDUSTRY

Directory of Open Access Journals (Sweden)

Edison Cesar de Faria Nogueira

2015-03-01

Full Text Available This article presents a case study related to the implementation of a Work Safety Program in a chemical industry, based on the Process Safety Program, PSP, of a huge energy company. The research was applied, exploratory, qualitative and with and data collection method through documentary and bibliographical research. There will be presented the main practices adopted in order to make the Safety Program a reality inside a chemical industry, its results and contributions for its better development. This paper proposes the implementation of a Safety Program must be preceded by a diagnosis of occupational safety and health management system and with constant critical analysis in order to make the necessary adjustments.

LABOUR PROTECTION AND SAFETY IN THE BREWING INDUSTRY

Directory of Open Access Journals (Sweden)

Irina Melnik

2016-10-01

Full Text Available The article describes the quantification of the level of safety in the brewing industry, which allows determining the contribution of each employee to ensure healthy and safe working conditions. Factors have also been shown to affect the safety of each of the employees. Knowledge of the characteristics and limits of each of the factors makes it possible to secure workflow and solve potential problems early. Previously considered a comprehensive approach that allows full control of the security protecting the entire brewing industry. Efficient and safe work is possible only if the working environment at the workplace to meet all the requirements of international standards in the field of occupational safety and health. Therefore, each category from a number of activities, which can significantly reduce the level of injury, and ending with the characteristics of each of the factors for drawing up a plan to ensure the maximum protection of the company's employees, was discussed. Chemical, physical, biological and psychophysical factors may exist alone or in combination with each other. It is therefore important to identify in advance all of them and to take all measures relating to ensure safe working conditions in each of the processes. Separately considered optimal and allowable values of temperature, relative humidity and air velocity in the working area of industrial premises. The parameters were established for the purpose of continuous monitoring in order to ensure comfortable and safe work environment for each employee. In some cases it is necessary to consult with technicians to get the full picture of the possible threats posed by each type of equipment. Especially dangerous in terms of occupational safety and health in the brewing industry is a cooking workshop, where the air temperature in the working area is significantly increased, as well as the bottling plant (noisy.

Safety Criteria for the Private Spaceflight Industry

Science.gov (United States)

Quinn, Andy; Maropoulos, Paul

2010-09-01

The Federal Aviation Administration(FAA) Office of Commercial Space Transportation(AST) has set specific rules and generic guidelines to cover experimental and operational flights by industry forerunners such as Virgin Galactic and XCOR. One such guideline Advisory Circular(AC) 437.55-1[1] contains exemplar hazard analyses for spacecraft designers and operators to follow under an experimental permit. The FAA’s rules and guidelines have also been ratified in a report to the United States Congress, Analysis of Human Space Flight Safety[2] which cites that the industry is too immature and has ‘insufficient data’ to be proscriptive and that ‘defining a minimum set of criteria for human spaceflight service providers is potentially problematic’ in order not to ‘stifle the emerging industry’. The authors of this paper acknowledge the immaturity of the industry and discuss the problematic issues that Design Organisations and Operators now face.

Health and safety record of the nuclear industry

International Nuclear Information System (INIS)

Carter, M.W.; Carruthers, E.; Button, J.C.E.

1975-09-01

This paper examines the claim of the nuclear industry to have an excellent safety record, in terms of health and accident records of workers in the industry. It does not consider accidents which have not resulted in harm to the workers' health. The nuclear industry is considered to include all work with ionising radiations and radioactive materials, in education, research, medicine and industry. Since 'safety' is not an absolute concept, comparisons are made with the published records of other industries, and a study is made of the performance of the nuclear industry in relation to its own safety criteria. Data are presented on the radiation exposure of nuclear workers in Europe, America, India and Australia, in relation to the internationally recommended limits, and there is some discussion of the risks involved in these limits. The death rate in parts of the nuclear industry in America, the United Kingdom, and Australia is presented and compared with the death rate for other industries in those countries, and a listing is made of deaths caused by radiation in the period 1945 to 1968. Injury rates for the US and Australian nuclear industries are also compared with the injury rates for other industries in these countries. Consideration is given to the safety record of individual components of the nuclear industry (using the wide definition of this industry given above), special attention being given to health records of uranium miners, plutonium workers and radiologists. Although there are difficulties in obtaining sufficiently detailed information of this kind it is considered that the data presented, relative to any reasonable standard, demonstrate that the nuclear industry has a safety record to be proud of. (author)

Safety management in the industry

International Nuclear Information System (INIS)

Jaecklin, A.

1996-01-01

The safety management in the industry is characterised by the large number of processes and the materials used in them. Correspondingly large are the legal regulations. Through the thickets of today's controls, the industry moves inside a relatively tight network of technical regulations. The experience of environmental audits and industrial damage, however, shows that the greatest deficit lies in the organisational methods and less on the technical side. For the overcoming of risks one needs to recognise the weaknesses of a careful analysis. To this belongs the estimation of how far a possible scenario can be taken. The estimation of the possibilities of occurrence, however, comes up against particular problems in the industry, as the human factor in relationship with danger potentialities is very difficult to evaluate. Actual basic data or statistics are missing. This lack can only be made good with the building up of a safety management. The fundamental principles of such a management can be taken from the environmental management and especially from the standard for environmental management ISO 14001. Here it is important that safety management is integrated into the process-oriented business processes and thus becomes a part of the company culture. (author) 11 figs., tabs., 11 refs

Modeling the factors affecting unsafe behavior in the construction industry from safety supervisors' perspective.

Science.gov (United States)

Khosravi, Yahya; Asilian-Mahabadi, Hassan; Hajizadeh, Ebrahim; Hassanzadeh-Rangi, Narmin; Bastani, Hamid; Khavanin, Ali; Mortazavi, Seyed Bagher

2014-01-01

There can be little doubt that the construction is the most hazardous industry in the worldwide. This study was designed to modeling the factors affecting unsafe behavior from the perspective of safety supervisors. The qualitative research was conducted to extract a conceptual model. A structural model was then developed based on a questionnaire survey (n=266) by two stage Structural Equation Model (SEM) approach. An excellent confirmed 12-factors structure explained about 62% of variances unsafe behavior in the construction industry. A good fit structural model indicated that safety climate factors were positively correlated with safety individual factors (Pconstruction workers' engagement in safe or unsafe behavior. In order to improve construction safety performance, more focus on the workplace condition is required.

Radiation Safety in Industrial Radiography. Specific Safety Guide (French Edition); Surete radiologique en radiographie industrielle

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-05-15

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in Horizontal-Ellipsis shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

French ESPN order, codes and nuclear industry requirements

International Nuclear Information System (INIS)

Laugier, C.; Grandemange, J.M.; Cleurennec, M.

2010-01-01

Work on coding safety regulations applicable to large equipment was undertaken in France as of 1978 to accompany the construction of a French nuclear plant. The needs of manufacturers were threefold: translate the design rules from the American licensor, meet the safety objectives expressed in French regulations published at that time through coding of industrial practices (order of February 26, 1974) and stabilize the work reference system between the operator - consultant - and the manufacturer responsible for applying technical recommendations. Significant work was carried out by AFCEN (the French Association for the Design, Construction and Operating Supervision of the equipment for Electronuclear boilers), an association created for this purpose, leading to the publication of a collection of rules related to mechanical equipment for pressurised water reactors, RCC-M and RSE-M, which will be discussed later, and also in several other technical fields: particularly mechanical equipment in fast neutron reactors, RCC-MR, electricity (RCC-E), and fuel (RCC-C). (authors)

Industrial safety management with emphasis on construction safety

International Nuclear Information System (INIS)

Bhattacharya, R.

2016-01-01

Safety professionals, line managers, team leaders and concerned workers today eagerly discuss to find out the best safety approach for their workplace. Some research suggested that behaviour based and comprehensive ergonomics approaches lead in average reduction of injuries. This article discusses 'the science and engineering' behind improvement in industrial safety aspects particularly at construction sites through various safety approaches. A high degree of commitment to safety by the project management and rigorous and proactive measures are essential to prevent accidents at construction sites particularly in DAE units because of its sensitivity. Persistent efforts by the project management are needed for sustainable and committed safety at work place. The number of fatalities occurring from construction work in DAE units is sometimes disturbing and fall of person from height and through openings are the major causes for serious accidents

Industrial Student Apprenticeship: Understanding Health and Safety

Science.gov (United States)

Simanjuntak, M. V.; Abdullah, A. G.; Puspita, R. H.; Mahdan, D.; Kamaludin, M.

2018-02-01

The level of accident in industry is very high caused by lack of knowledge and awareness of workers toward the health and safety. Health and Safety are efforts to create a comfortable and productive atmosphere to accomplish a purpose or goal as maximum risk in the workplace. Vocational Education students must conduct training on business and industry, prior to that they should have a clear understanding on occupational health and safety. The purpose of this research is to analyze the understanding, preparation, and implementation of work health and safety of the students. Method used is descriptive method and data are collected using instrument, observation and interview. The result of study is conclusion of understanding occupational health and safety of vocational education students.

10 CFR 34.42 - Radiation Safety Officer for industrial radiography.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Radiation Safety Officer for industrial radiography. 34.42 Section 34.42 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION... Radiation Safety Officer for industrial radiography. The RSO shall ensure that radiation safety activities...

Community Road Safety Initiatives for the Minerals Industry

Directory of Open Access Journals (Sweden)

Tim Horberry

2013-12-01

Full Text Available Major companies in the minerals industry are increasingly recognizing that their operations have an impact in the wider community. Regarding transportation issues, this impact extends beyond purely the safety of company vehicle fleets to consideration of Community Road Safety (CRS concerns, which address the driving, walking, and riding practices of community members in a locale with increased heavy vehicle traffic. Our assessment here of national and international trends in approaches to road safety awareness and associated road safety strategies is meant to inform companies in the minerals industry of developments that can influence the design of their road safety initiatives. The review begins by considering the overall road safety context and the dominant “safe systems” framework employed internationally. Thereafter, it considers what is typically included in CRS initiatives for the minerals industry. Three case studies are then presented to highlight approaches that feature exemplary collaboration, design, implementation, or impact. Thereafter, we analyze lessons learnt by key researchers and practitioners in the CRS field. Finally, we conclude that best CRS practices for the minerals industry rely on eleven factors, including for example collaboration with local entities and stepwise implementation.

Radiological safety in petroleum industry. Towards prevention culture

International Nuclear Information System (INIS)

Truppa, Walter A.

2007-01-01

Within the frame of regulatory control of industrial applications the audit of sealed and open radioactive sources in oil uses is one of the most relevant. The handling of radioactive sources, the requirement of procedures and training are just a few examples among all those that make up the radiological safety culture. A number of requirements divided into three main groups: operational safety at the storage area of radioactive sources, during transportation and during the applications (Cementation, well logging and use of radiotracers) are highlighted. Due to the great number of aspects that have to be taken in account as well as the interrelation of all control processes it is highly recommended that aspects of safety culture and quality should be considered and improvements regarding prevention, should be introduced so as to correct deviations that could arise in order to avoid radiological risk situations, emphasizing risk perception situations, attitude training, implementation of audit and level of safety in the facilities and control of duties, involving radiological material handling, described in the present work. (author) [es

Safety in construction industry - overview

International Nuclear Information System (INIS)

Chockalingam, S.; Nehru, R.M.; Ramprasad, K.; Sonawane, A.U.

2016-01-01

The construction industry plays an important role in the social and economic development in a country. Safety in the construction industry is considered a major issue in developed and developing countries. In urban sector of India increasing numbers of workers have taken up construction work as a means of immediate employment, which provides cash earnings at the end of the day. Being as unorganized sector, the fatal injuries in DAE unit for the construction industry (Nuclear Power Project including BHAVINI: 62.7% from 1999 to 2014) is higher than the category for all other units (UCIL:13.3%; ECIL:6.7%; NFC and ZC: 4%; HWP: 2.7%; IREL:2.7%; Nuclear Power Plant: 2.7% etc., from 1999 to 2014). A variety hazards exist in the construction site. The best way to protect workers against workers against hazards is to control problems at the source. The problem regarding construction industry is not that the hazards and risks are unknown, but it very difficult to accurately identify in a constantly changing work environment. To prevent hazards at work, all possible hazards that may be encountered should be identified in advance through Job Hazard Analysis (JHA). The present scenario has deduced a fact that efficient Safety Management Techniques (SMT) are (essential for today's construction companies and adaptation of legal requirements including regulatory requirements and proactive safety management techniques will help organizations in providing a better workplace to its employees and reduce the accidents. (author)

Using game theory to improve safety within chemical industrial parks

CERN Document Server

Reniers, Genserik

2013-01-01

Though the game-theoretic approach has been vastly studied and utilized in relation to economics of industrial organizations, it has hardly been used to tackle safety management in multi-plant chemical industrial settings. Using Game Theory for Improving Safety within Chemical Industrial Parks presents an in-depth discussion of game-theoretic modelling which may be applied to improve cross-company prevention and -safety management in a chemical industrial park.   By systematically analyzing game-theoretic models and approaches in relation to managing safety in chemical industrial parks, Using Game Theory for Improving Safety within Chemical Industrial Parks explores the ways game theory can predict the outcome of complex strategic investment decision making processes involving several adjacent chemical plants. A number of game-theoretic decision models are discussed to provide strategic tools for decision-making situations.   Offering clear and straightforward explanations of methodologies, Using Game Theor...

Radiation safety in nuclear industry in retrospect and perspective

International Nuclear Information System (INIS)

Pan Ziqiang

1993-01-01

More than 30 years have passed since the starting up of nuclear industry in China from the early 1950's. Over the past 30-odd years, nuclear industry has always kept a good record in China thanks to the policy of 'quality first, safety first' clearly put forward for nuclear industry from the outset and a lot of suitable effective measures taken over that period. Internationally, there is rapid progress in radiation protection and nuclear safety (hereafter refereed to as radiation safety) and a number of new concepts in the field of radiation protection have been advanced. Nuclear industry is developing based on the international standardization. To ensure the further development of nuclear utility, radiation safety needs to be further strengthened

Road safety and trade and industry.

OpenAIRE

2014-01-01

Trade and industry mostly experience the negative consequences of crashes, but sometimes the consequences are positive. The negative consequences of road traffic crashes include loss of personnel and damage to vehicles. Some other industries, such as damage repair companies, on the other hand, derive income from road crashes. Trade and industry can also be of importance for road safety. Particularly the transport sector, the car industry and insurers take several initiatives which for example...

Enhancing Safety Culture in Complex Nuclear Industry Projects

International Nuclear Information System (INIS)

Gotcheva, N.

2016-01-01

This paper presents an on-going research project “Management principles and safety culture in complex projects” (MAPS), supported by the Finnish Research Programme on Nuclear Power Plant Safety 2015-2018. The project aims at enhancing safety culture and nuclear safety by supporting high quality execution of complex projects in the nuclear industry. Safety-critical industries are facing new challenges, related to increased outsourcing and complexity in technology, work tasks and organizational structures (Milch and Laumann, 2016). In the nuclear industry, new build projects, as well as modernisation projects are temporary undertakings often carried out by networks of companies. Some companies may have little experience in the nuclear industry practices or consideration of specific national regulatory requirements. In large multinational subcontractor networks, the challenge for assuring nuclear safety arises partly from the need to ensure that safety and quality requirements are adequately understood and fulfilled by each partner. Deficient project management practices and unsatisfactory nuclear safety culture in project networks have been recognised as contributing factors to these challenges (INPO, 2010). Prior evidence indicated that many recent major projects have experienced schedule, quality and financial challenges both in the nuclear industry (STUK, 2011) and in the non-nuclear domain (Ahola et al., 2014; Brady and Davies, 2010). Since project delays and quality issues have been perceived mainly as economic problems, project management issues remain largely understudied in safety research. However, safety cannot be separated from other performance aspects if a systemic view is applied. Schedule and quality challenges may reflect deficiencies in coordination, knowledge and competence, distribution of roles and responsibilities or attitudes among the project participants. It is increasingly understood that the performance of the project network in all

Implementation of safety management systems in Hong Kong construction industry - A safety practitioner's perspective.

Science.gov (United States)

Yiu, Nicole S N; Sze, N N; Chan, Daniel W M

2018-02-01

In the 1980s, the safety management system (SMS) was introduced in the construction industry to mitigate against workplaces hazards, reduce the risk of injuries, and minimize property damage. Also, the Factories and Industrial Undertakings (Safety Management) Regulation was introduced on 24 November 1999 in Hong Kong to empower the mandatory implementation of a SMS in certain industries including building construction. Therefore, it is essential to evaluate the effectiveness of the SMS in improving construction safety and identify the factors that influence its implementation in Hong Kong. A review of the current state-of-the-practice helped to establish the critical success factors (CSFs), benefits, and difficulties of implementing the SMS in the construction industry, while structured interviews were used to establish the key factors of the SMS implementation. Results of the state-of-the-practice review and structured interviews indicated that visible senior commitment, in terms of manpower and cost allocation, and competency of safety manager as key drivers for the SMS implementation. More so, reduced accident rates and accident costs, improved organization framework, and increased safety audit ratings were identified as core benefits of implementing the SMS. Meanwhile, factors such as insufficient resources, tight working schedule, and high labor turnover rate were the key challenges to the effective SMS implementation in Hong Kong. The findings of the study were consistent and indicative of the future development of safety management practice and the sustainable safety improvement of Hong Kong construction industry in the long run. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B [ed.; Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B. (ed.) (Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering)

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Industrial Safety and Accidents Prevention

International Nuclear Information System (INIS)

Sajjad Akbar

2006-01-01

Accident Hazards, dangers, losses and risk are what we would to like to eliminate, minimize or avoid in industry. Modern industries have created many opportunities for these against which man's primitive instincts offer no protection. In today's complex industrial environment safety has become major preoccupation, especially after the realization that there is a clear economic incentive to do so. Industrial hazards may cause by human error or by physical or mechanical malfunction, it is very often possible to eliminate the worst consequences of human error by engineering modification. But the modification also needs checking very thoroughly to ensue that it has not introduced some new and unsuspected hazard. (author)

Research study about the establishment of safety culture. Effects of organizational factors in construction industry's safety indices

International Nuclear Information System (INIS)

Kojima, Mitsuhiro; Hirose, Humiko; Takano, Kenichi; Hasegawa, Naoko

1999-01-01

To find the relationships between safety related activities (such as safety patrol' or '4s/5s activities') and accidents rate in the workplace, questionnaires were sent to 965 construction companies and 120 answers were returned. In this questionnaire, safety activities, safety regulations and safety policies of the companies were asked and organizational climates, company policies, philosophies and the number of accidents in workplace were also asked. There seems some relationships between accidents rate and safety activities, safety regulations and safety policies in the companies, but the deviations between estimate values and observed values are so great that it seems impossible to estimate the accidents rate in the working place from the safety activities, safety regulations and safety policies of the companies. On the other hand, some characteristics of safety activities and organizational climates in the construction industry were identified using multi variants analysis. More detailed researches using sophisticated questionnaire will be conducted in the construction industry and petrochemical industry and relationships between the accidents rate and the safety activities will be compared between different industries. (author)

Biosensor: an emerging safety tool for meat industry.

Science.gov (United States)

Singh, Pradeep Kumar; Jairath, Gauri; Ahlawat, Satyavir Singh; Pathera, Ashok; Singh, Prashant

2016-04-01

The meat industry associated with the health hazards like deadly pathogens, veterinary drugs, pesticide residues, toxins and heavy metals is in need of a tool to tackle the awful situation and ensure safer product to consumer. The growth in the industry, global trade scenario, stringent laws and consumer awareness has placed an extra onus on the meat industry to meet out the expectations and demands. Biosensors are the latest tool of detection in the fast growing industries including the food industry. Hence an attempt is envisaged here to review the possibility of harnessing biosensors as tool of safety to safe guard the consumer health and address safety issues in reference to the common threats of concern in the meat industry.

Development of Safety Kit for Industrial Radiography Application

International Nuclear Information System (INIS)

Mohd Noorul Ikhsan Ahmad; Amry Amin Abas

2011-01-01

A safety kit for industrial radiography has been developed. The safety kit that consist of a set of technical rod and various size of base that can be used in radiograph of pipe with diameter between half and one and half inch with utilization of collimator. With the kit, radiographers will not having anymore problem to use collimator in their work. The paper discuss about the technical measures of the safety kit and the importance of introducing it to the industry. (author)

Safety: predominant task in oil and petrochemical industry

Energy Technology Data Exchange (ETDEWEB)

Zuern, G.

1977-01-01

Based on the history of accident statistics in the last years the economic aspects of safety are indicated. Research projects which are discussed in the DGMK-Committee 'Safety in Process Industries' are reported on: statistics concerning the accident situation in the oil industry, research of electrostatic loading of oil products being pumped under operating conditions, evaluation of fire fighting requirements in the oil industry, and the development of a European Model Code of Safe Practice in Oil Installations.

Occupational safety in the petroleum industry

Energy Technology Data Exchange (ETDEWEB)

Elsner, W

1987-03-01

The original technique-oriented accident prevention today has grown to a comprehensive occupational workers protection system. Modern occupational safety requires latest strategies. Side by side with technical and organizational measures we see duties for all superiors directed to plant related occupational safety. These new principles of leadership on the basis of occupational safety policies from top management require equivalent tactics to cause change in behaviour of the employees. Such a not only formulated but also accepted safety strategy is extremely clear by its positive results in the petroleum industry.

Radiation safety in industrial applications of nuclear techniques

International Nuclear Information System (INIS)

Lam, E.S.

1981-01-01

The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise. (author)

Radiation safety in industrial applications of nuclear techniques

Energy Technology Data Exchange (ETDEWEB)

Lam, E S [Ministry of Health, Kuala Lumpur (Malaysia)

1981-01-01

The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise.

Operation safety of complex industrial systems

International Nuclear Information System (INIS)

Zwingelstein, G.

1999-01-01

Zero fault or zero risk is an unreachable goal in industrial activities like nuclear activities. However, methods and techniques exist to reduce the risks to the lowest possible and acceptable level. The operation safety consists in the recognition, evaluation, prediction, measurement and mastery of technological and human faults. This paper analyses each of these points successively: 1 - evolution of operation safety; 2 - definitions and basic concepts: failure, missions and functions of a system and of its components, basic concepts and operation safety; 3 - forecasting analysis of operation safety: reliability data, data-banks, precautions for the use of experience feedback data; realization of an operation safety study: management of operation safety, quality assurance, critical review and audit of operation safety studies; 6 - conclusions. (J.S.)

Advanced korean industrial safety and health policy with risk assessment.

Science.gov (United States)

Kwon, Hyuckmyun; Cho, Jae Hyun; Moon, Il; Choi, Jaewook; Park, Dooyong; Lee, Youngsoon

2010-09-01

This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm-shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers' compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012) and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

New radiation protection concept as important safety factor of industrial radiography

International Nuclear Information System (INIS)

Pavlovic, R.; Pavlovic, S.

1998-01-01

Industrial radiography is a method for non destructive testing of homogeneity of various materials based on different absorption of radiation in different material. X and γ radiation are the most often used. Detrimental effects of radiation are observed since its discovery. In order to prevent harmful effects of radiation without unduly limitations of its use, International Commission on Radiological Protection in collaboration with International Atomic Energy Agency have developed International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources, Safety Series No 115, adopted in 1996. based on ICRP recommendations from 1991. Besides a lot of changes in radiation protection concept and philosophy, decrement of annual dose limits for occupational exposure from 50 to 20 mSv. (author)

Occupational safety of different industrial sectors in Khartoum State, Sudan. Part 1: Safety performance evaluation.

Science.gov (United States)

Zaki, Gehan R; El-Marakby, Fadia A; H Deign El-Nor, Yasser; Nofal, Faten H; Zakaria, Adel M

2012-12-01

Safety performance evaluation enables decision makers improve safety acts. In Sudan, accident records, statistics, and safety performance were not evaluated before maintenance of accident records became mandatory in 2005. This study aimed at evaluating and comparing safety performance by accident records among different cities and industrial sectors in Khartoum state, Sudan, during the period from 2005 to 2007. This was a retrospective study, the sample in which represented all industrial enterprises in Khartoum state employing 50 workers or more. All industrial accident records of the Ministry of Manpower and Health and those of different enterprises during the period from 2005 to 2007 were reviewed. The safety performance indicators used within this study were the frequency-severity index (FSI) and fatal and disabling accident frequency rates (DAFR). In Khartoum city, the FSI [0.10 (0.17)] was lower than that in Bahari [0.11 (0.21)] and Omdurman [0.84 (0.34)]. It was the maximum in the chemical sector [0.33 (0.64)] and minimum in the metallurgic sector [0.09 (0.19)]. The highest DAFR was observed in Omdurman [5.6 (3.5)] and in the chemical sector [2.5 (4.0)]. The fatal accident frequency rate in the mechanical and electrical engineering industry was the highest [0.0 (0.69)]. Male workers who were older, divorced, and had lower levels of education had the lowest safety performance indicators. The safety performance of the industrial enterprises in Khartoum city was the best. The safety performance in the chemical sector was the worst with regard to FSI and DAFR. The age, sex, and educational level of injured workers greatly affect safety performance.

FOOD SAFETY IN CATERING INDUSTRY

Directory of Open Access Journals (Sweden)

P. Cattaneo

2009-03-01

Full Text Available Catering industry plays a very important role in public health management, because about 30% of total daily meals are consumed in catering industry (restaurants, bar. In this work food safety was evaluated in 20 catering centres throughout microbiological analyses of different categories of meals. Results demonstrate that there was an important decrease of microbial contamination between 2006 and 2007, no pathogens were found in 217 samples examined: this was obtained by improving voluntary controls.

Correlation of Safety Culture Attributes in Construction Industry

Directory of Open Access Journals (Sweden)

Pervez Shaikh

2013-07-01

Full Text Available The importance of construction industry can not be overemphasized because it is one of the biggest contributors toward economic activities of a country. It employs a countable number of workforce and it is prone to accidents, incidents, hazards and disasters, therefore, the safety factor is equally important. The current research explores safety culture in the perspective of its important attributes. The EFQM (European Foundation for Quality Management is taken as the bases for finding the ways and means of safety culture improvement of the construction industry. The correlation of pattern of responses is found for every attribute of the safety culture and the interrelationships and strengths are worked out to detect the involvement of the attribute.

Human and Organisational Safety Barriers in the Oil & Gas Industry

International Nuclear Information System (INIS)

Nystad, E.; Szőke, I.

2016-01-01

The oil & gas industry is a safety-critical industry where errors or accidents may potentially have severe consequences. Offshore oil & gas installations are complex technical systems constructed to pump hydrocarbons from below the seabed, process them and pipe them to onshore refineries. Hydrocarbon leaks may lead to major accidents or have negative environmental impacts. The industry must therefore have a strong focus on safety. Safety barriers are devices put into place to prevent or reduce the effects of unwanted incidents. Technical barriers are one type of safety barrier, e.g., blow-out preventers to prevent uncontrolled release of hydrocarbons from a well. Human operators may also have an important function in maintaining safety. These human operators are part of a larger organisation consisting of different roles and responsibilities and with different mechanisms for ensuring safety. This paper will present two research projects from the Norwegian oil & gas industry that look at the role of humans and organisations as safety barriers. The first project used questionnaire data to investigate the use of mindful safety practices (safety-promoting work practices intended to prevent or interrupt unwanted events) and what contextual factors may affect employees’ willingness to use these safety practices. Among the findings was that employees’ willingness to use mindful safety practices was affected more by factors on a group level than factors at an individual or organisational level, and that the factors may differ depending on what is the object of a practice—the employee or other persons. It was also suggested that employees’ willingness to use mindful safety practices could be an indicator used in the assessment of the safety level on oil & gas installations. The second project is related to organisational safety barriers against major accidents. This project was based on a review of recent incidents in the Norwegian oil & gas industry, as well as

Safety Considerations in the Chemical Process Industries

Science.gov (United States)

Englund, Stanley M.

There is an increased emphasis on chemical process safety as a result of highly publicized accidents. Public awareness of these accidents has provided a driving force for industry to improve its safety record. There has been an increasing amount of government regulation.

On the future of safety in the manufacturing industry

OpenAIRE

Reniers, G.

2017-01-01

Abstract: This paper argues that a new paradigm is needed in the manufacturing industry to further substantially advance safety as part of the industry 4.0 concept. The different domains that need to be focused upon are Cluster-thinking and cooperation, High transparency and efficient inspections, Education and training, Security integration, and Safety innovation. Since society has fundamentally changed over the last two decades, revolutionizing safety via these domains is truly needed in th...

Multilevel model of safety climate for furniture industries.

Science.gov (United States)

Rodrigues, Matilde A; Arezes, Pedro M; Leão, Celina P

2015-01-01

Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies' safety conditions were also analyzed. Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies' safety conditions; the organizational scale is the one that best reflects the actual safety conditions. The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups' safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

Safety in construction industry

International Nuclear Information System (INIS)

Khan, A.M.

1979-01-01

Causative factors of accidents in construction industry in the context of experience of construction work of the Rajasthan Atomic Power Project are enumerated. The aspect of accident cost - direct and indirect - is discussed briefly. Setting up of a safety set-up at construction sites is emphasized and principles which should guide the accident prevention programme are spelt out. (M.G.B.)

Advanced Korean Industrial Safety and Health Policy with Risk Assessment

Directory of Open Access Journals (Sweden)

Hyuckmyun Kwon

2010-09-01

Full Text Available This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm- shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers’ compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012 and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

49 CFR 190.239 - Safety orders.

Science.gov (United States)

2010-10-01

... pipeline integrity risk to public safety, property, or the environment, the Associate Administrator may issue an order requiring the operator of the facility to take necessary corrective action. Such action... existence of a condition that poses a pipeline integrity risk to public safety, property, or the environment...

Managing for safety and safety culture within the UK nuclear industry. A regulator's perspective

International Nuclear Information System (INIS)

Tyrer, M.J.

2002-01-01

This paper outlines the basis of the legal system for the regulation of health and safety at work within the United Kingdom (UK), and in particular, the regulation of the nuclear industry. The framework, formulated by the regulator, which has been published as a practical guide for directors, managers, health and safety professionals and employee representatives for the successful management of health and safety is explained. This guidance, however, concentrates, to a large extent, on management systems and only addresses in part the types of issues, such as behaviours, values, attitudes and beliefs which contribute to the safety culture of an organization. The regulator of the UK nuclear industry has considered research, and other work, carried out by several organizations in this area, notably the Advisory Committee on the Safety of Nuclear Installations (ACSNI) and the International Atomic Energy Agency (IAEA), and produced its own framework for managing for safety at nuclear installations. As a regulator, the Health and Safety Executive (HSE), and its inspectorate responsible for regulation of the nuclear industry, HM Nuclear Installations Inspectorate (HMNII), are not the appropriate organization to assess the safety culture of an organization, but positively encourage organizations to both carry out this assessment themselves and to monitor their performance. To this end, HSE has developed, and made available, the Health and Safety Climate Tool which is aimed at providing organizations with information which can be used as part of a continuous improvement process. (author)

High safety in the mining industry

Energy Technology Data Exchange (ETDEWEB)

1987-08-01

Presents an interview in question and answer format with the deputy chairman of Gosgortekhnadzor (Committee for Supervision of Industrial Work Safety and Mining Supervision) in which he discusses two recent fatal accidents in the Yasinovskaya-Glubokaya and Chaikino coal mines and identifies areas where safety needs to be improved (more automation, protective devices, ventilation etc.). Discusses the particular problems involved with deep mining (20% of mines are now deeper than 700 m and 27 mines are deeper than 1000 m), such as fires, dust, methane, rock falls, insufficient maintenance and strata control and poor ventilation. Confirms that a large number of accidents is due to poor organization and stresses the fact the coal industry must be subjected to perestroika (restructuring) as much as other areas of society.

Safety and security profiles of industry networks used in safety- critical applications

Directory of Open Access Journals (Sweden)

Mária FRANEKOVÁ

2008-01-01

Full Text Available The author describes the mechanisms of safety and security profiles of industry and communication networks used within safety – related applications in technological and information levels of process control recommended according to standards IEC 61784-3,4. Nowadays the number of vendors of the safety – related communication technologies who guarantees besides the standard communication, the communication amongst the safety – related equipment according to IEC 61508 is increasing. Also the number of safety – related products is increasing, e. g. safety Fieldbus, safety PLC, safety curtains, safety laser scanners, safety buttons, safety relays and other. According to world survey the safety Fieldbus denoted the highest growth from all manufactured safety products.The main part of this paper is the description of the safety-related Fieldbus communication system, which has to guaranty Safety Integrity Level.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry

Directory of Open Access Journals (Sweden)

Jiangshi Zhang

2016-11-01

Full Text Available Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5, and six were at a relatively high level (4.5 > mean > 4.0. Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry.

Science.gov (United States)

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-11-17

Introduction: Senior managers' attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers' attitudes towards safety in the Chinese coal industry. Method : We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions : Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers' safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers' unions not playing their role effectively. Practical Applications : We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry

Science.gov (United States)

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-01-01

Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry. PMID:27869654

Safety and security of radioactive sources in industrial radiography in Bangladesh

Energy Technology Data Exchange (ETDEWEB)

Mollah, A. S.; Nazrul, M. Abdullah [Industrial Inspection Service Limited, Dhaka (Bangladesh)

2013-07-01

Malicious use of radioactive sources can involve dispersal of that material through an explosive device. There has been recognition of the threat posed by the potential malicious misuse of NDT radioactive source by terrorists. The dispersal of radioactive material using conventional explosives, referred to as a 'dirty bomb', could create considerable panic, disruption and area access denial in an urban environment. However, as it is still a relatively new topic among regulators, users, and transport and storage operators worldwide, international assistance and cooperation in developing the necessary regulatory and security infrastructure is required. The most important action in reducing the risk of radiological terrorism is to increase the security of radioactive sources. This paper presents safety and security considerations for the transport and site storage of the industrial radiography sources as per national regulations entitled 'Nuclear Safety and Radiation Control Rules-1997'.The main emphasis was put on the stages of some safety and security actions in order to prevent theft, sabotage or other malicious acts during the transport of the packages. As a conclusion it must be mentioned that both safety and security considerations are very important aspects that must be taking in account for the transport and site storage of radioactive sources used in the practice of industrial radiography. (authors)

Safety and security of radioactive sources in industrial radiography in Bangladesh

International Nuclear Information System (INIS)

Mollah, A. S.; Nazrul, M. Abdullah

2013-01-01

Malicious use of radioactive sources can involve dispersal of that material through an explosive device. There has been recognition of the threat posed by the potential malicious misuse of NDT radioactive source by terrorists. The dispersal of radioactive material using conventional explosives, referred to as a 'dirty bomb', could create considerable panic, disruption and area access denial in an urban environment. However, as it is still a relatively new topic among regulators, users, and transport and storage operators worldwide, international assistance and cooperation in developing the necessary regulatory and security infrastructure is required. The most important action in reducing the risk of radiological terrorism is to increase the security of radioactive sources. This paper presents safety and security considerations for the transport and site storage of the industrial radiography sources as per national regulations entitled 'Nuclear Safety and Radiation Control Rules-1997'.The main emphasis was put on the stages of some safety and security actions in order to prevent theft, sabotage or other malicious acts during the transport of the packages. As a conclusion it must be mentioned that both safety and security considerations are very important aspects that must be taking in account for the transport and site storage of radioactive sources used in the practice of industrial radiography. (authors)

Nuclear industry and radioecological safety

International Nuclear Information System (INIS)

Semenov, V. G.

2006-01-01

The beginning of XXI century is marked with increasing public concern over impact of man-made activity, including nuclear technologies, on the environment. Currently, the anthropocentric principle is applied in the course of the radioecological safety guaranteeing for the environment, which postulates that human protectability serves as guarantee of the environmental one. However, this principle correctness is called in question recently. The ecocentric principle is proposed as an alternative doctrine, defining balance between human importance and that of any other elements of biota. The system recommended isn't intended for the regulatory standards development yet, because of substantial gaps in scientific knowledge. Nevertheless, renunciation of the anthropocentric principle can result in unwarranted tightened regulatory basis, decreasing of nuclear industry evolution rates, and, consequently, breaching of societal and economical priorities. It is obvious that for the safety guaranteeing, nuclear industry shouldn't stand out against a background of other fields of human activity involved hazard factors. Therefore, new conceptions applying within the regulatory system is to be weighted and exclude formal using of discussion theses. More than semi-centennial experience of the anthropocentric approach applying serves as an evidence of safe protection of ecosystems against radiation exposure that ensures safe ecological development of nuclear power industry and other fields of nuclear technologies application. (author)

Further activities of safety culture toward nuclear transportation industry

International Nuclear Information System (INIS)

Machida, Y.; Shimakura, D.

2004-01-01

On September 30, 1999, a criticality accident occurred at the uranium processing facility of the JCO Co. Ltd. (hereinafter referred to as ''JCO'') Tokai plant, located in Tokaimura, Ibaraki Prefecture. This was an unprecedented accident in Japan's history of peaceful use of nuclear power, resulting in three workers exposed to severe radiation, two of whom died, and the evacuation and enforced indoor confinement of local residents. Nuclear power suppliers must take personal responsibility for ensuring safety. In this connection, the electric power industry, heavy electric machinery manufacturers, fuel fabricators, and nuclear power research organizations gathered together to establish the Nuclear Safety Network (NSnet) in December 1999, based on the resolve to share and improve the level of the safety culture across the entire nuclear power industry and to assure that such an accident never occurs again. NSnet serves as a link between nuclear power enterprises, research organizations, and other bodies, based on the principles of equality and reciprocity. A variety of activities are pursued, such as diffusing a safety culture, implementing mutual evaluation among members, and exchanging safety-related information. Aiming to share and improve the safety culture throughout the entire nuclear power industry, NSnet thoroughly implements the principle of safety first, while at the same time making efforts to restore trust in nuclear power

Approaching safety in the Swedish and Danish construction industry

DEFF Research Database (Denmark)

Grill, Martin; Grytnes, Regine; Törner, Marianne

2015-01-01

in accidents rates, especially in construction, and as such offer an opportunity to explore organizational and managerial issues related to safety outcomes. Methods: Semi-structured interviews were carried out with five construction managers and four construction workers in Danish and Swedish construction...... industry. The transcripts were analysed using semantic thematic analysis. Results: Seven safety related themes were distinguished, conveying safety culture differences between Swedish and Danish construction industry concerning: participatory or directive management; challenge or obey; compliance or non...... identifies seven factors perceived by the professionals as related to lower occupational accident rates in the construction industry. Engaging in participatory management, promoting long-term planning and long-term tenures, encouraging cooperation, cautiousness and compliance to rules as well as challenging...

Role of industry in the environmental health and safety aspects of the developing Plowshare industry

Energy Technology Data Exchange (ETDEWEB)

Hilberry, N [University of Arizona (United States)

1969-07-01

lt is first pointed out that no person or organization has a more vital interest in the early establishment of an effective health and safety program within which commercial operations based on Plowshare technology can be carried on with assurance than does that facet of industry which is directly involved in the attempt to prove out these Plowshare applications. The formulation of such a code must be a matter of the highest priority to all concerned. To accomplish this task successfully, however, requires the exercise of a truly hard-nosed objectivity both on the part of the Governmental agencies who bear statutory responsibility for ensuring the public health and safety and also on that of the industrial groups who are trying to realize the significant economic potentials inherent in the Plowshare technology. While it is abundantly clear that achievement of a sound and reliable public health and safety code is imperative for both regulatory agencies and operating industry, it must also be recognized that both groups serve the inescapable additional responsibility of acting as the public's trustees to assure the healthy development of a new technology which may well prove to be of vital importance to the Nation. The basic nature of the joint operating procedure required in order to provide an effective way of fulfilling these common obligations is then examined. The discussion then turns to the present stage of the developmental progress of the potential Plowshare industry. Scientific breakthrough has long since been accomplished and scientific feasibility has been quite generally proven. For a number of important possible applications even technological feasibility has been established. In these cases the demonstration of economic feasibility and the attainment of public acceptance are the two factors that still remain to be achieved before a full-fledged if still infant industry becomes a reality. Industry alone is capable of determining economic feasibility. It

Role of industry in the environmental health and safety aspects of the developing Plowshare industry

International Nuclear Information System (INIS)

Hilberry, N.

1969-01-01

lt is first pointed out that no person or organization has a more vital interest in the early establishment of an effective health and safety program within which commercial operations based on Plowshare technology can be carried on with assurance than does that facet of industry which is directly involved in the attempt to prove out these Plowshare applications. The formulation of such a code must be a matter of the highest priority to all concerned. To accomplish this task successfully, however, requires the exercise of a truly hard-nosed objectivity both on the part of the Governmental agencies who bear statutory responsibility for ensuring the public health and safety and also on that of the industrial groups who are trying to realize the significant economic potentials inherent in the Plowshare technology. While it is abundantly clear that achievement of a sound and reliable public health and safety code is imperative for both regulatory agencies and operating industry, it must also be recognized that both groups serve the inescapable additional responsibility of acting as the public's trustees to assure the healthy development of a new technology which may well prove to be of vital importance to the Nation. The basic nature of the joint operating procedure required in order to provide an effective way of fulfilling these common obligations is then examined. The discussion then turns to the present stage of the developmental progress of the potential Plowshare industry. Scientific breakthrough has long since been accomplished and scientific feasibility has been quite generally proven. For a number of important possible applications even technological feasibility has been established. In these cases the demonstration of economic feasibility and the attainment of public acceptance are the two factors that still remain to be achieved before a full-fledged if still infant industry becomes a reality. Industry alone is capable of determining economic feasibility. It

Industrial Radiography Safety in Australia

International Nuclear Information System (INIS)

Hockings, Colin

2006-01-01

400 μSv average for industrial radiographers in a developed country such as the United Kingdom (NRPB 2005), it is less than that reported for a developing country such as Iran (AEOI 2004), which is 1650 μSv. Industrial radiography accidents most frequently occur with radiation devices using sealed sources such as iridium 192 and cobalt 60, and not with x-ray generators. In comparison to other countries, the safety record of industrial radiographers as judged by accident data and dose records, places Australia somewhere between that of an advanced country and a developing one. Many of the investigations into accidents in industrial radiography have revealed that their frequency and severity would have been reduced or even eliminated if the persons involved had been better prepared to use the equipment, and better prepared to deal with accident and incident situations. In Australia, there appears to be scope for improvement and standardisation of training in the use of industrial radiography equipment, and more importantly, in the training for response to possible accidents and incidents. A national standard for radiation safety training and assessment should be developed by a competent organisation such as the Australian Institute for Non-Destructive Testing. It should be incorporated into the Code of Practice or Safety Guide for industrial radiography and adopted by all jurisdictions. The use of a code of safe practice for industrial radiography should continue. The present NH and MRC code is in need of review. Such a review must result in a code and a guideline document which are readily useable by the industry, standardise training in radiation safety, ensure a high level of operational radiation safety and are available for adoption by the various Australian jurisdictions with minimal supplementary local requirements. Copyright (2006) The Australian Institute for Non-Destructive Testing

Risk management for industrial safety

International Nuclear Information System (INIS)

Novogno, A.

1989-01-01

The catastrophic accidents which have occurred in the last decade, in both developed and developing countries, have drawn the attention of decision-makers in the safety area to the urgent necessity to assess and manage risks from hazardous industrial activities which are concentrated in large industrialized areas. The aim of this paper is to review experience gained in conducting studies in the area of 'comparisons of risks in energy systems' and on the practical application of 'cost effectiveness of risk reduction analysis among different energy systems' (case studies). It is also the aim of the paper to discuss and propose a general framework for defining an 'integrated approach' to risk assessment and management in highly industrialized regions within a country. (author)

The electron accelerator in industry - safety aspects

International Nuclear Information System (INIS)

Kirthi, K.N.

1993-01-01

Electron beam accelerators are being used in increasing numbers in a variety of important applications. Commercial uses include radiography, food preservation, product sterilisation and radiation processing of materials. Since most of the industrial applications involve products, some that can be treated with electrons and others that require photons, electron accelerators serve this dual purpose economically. Although industrial accelerators are now regarded as standard products, finished installations show considerable diversity, reflecting the users, needs and planning. Because of the high radiation output, proper planning regarding safety is warranted. This paper discusses the hazards, safety and planning required during design and operation of the electron beam accelerators. (author). 4 refs., 1 fig

A survey of approaches combining safety and security for industrial control systems

International Nuclear Information System (INIS)

Kriaa, Siwar; Pietre-Cambacedes, Ludovic; Bouissou, Marc; Halgand, Yoran

2015-01-01

The migration towards digital control systems creates new security threats that can endanger the safety of industrial infrastructures. Addressing the convergence of safety and security concerns in this context, we provide a comprehensive survey of existing approaches to industrial facility design and risk assessment that consider both safety and security. We also provide a comparative analysis of the different approaches identified in the literature. - Highlights: • We raise awareness of safety and security convergence in numerical control systems. • We highlight safety and security interdependencies for modern industrial systems. • We give a survey of approaches combining safety and security engineering. • We discuss the potential of the approaches to model safety and security interactions

Further activities of safety culture toward nuclear transportation industry

Energy Technology Data Exchange (ETDEWEB)

Machida, Y.; Shimakura, D. [NSnet, Tokyo (Japan)

2004-07-01

On September 30, 1999, a criticality accident occurred at the uranium processing facility of the JCO Co. Ltd. (hereinafter referred to as ''JCO'') Tokai plant, located in Tokaimura, Ibaraki Prefecture. This was an unprecedented accident in Japan's history of peaceful use of nuclear power, resulting in three workers exposed to severe radiation, two of whom died, and the evacuation and enforced indoor confinement of local residents. Nuclear power suppliers must take personal responsibility for ensuring safety. In this connection, the electric power industry, heavy electric machinery manufacturers, fuel fabricators, and nuclear power research organizations gathered together to establish the Nuclear Safety Network (NSnet) in December 1999, based on the resolve to share and improve the level of the safety culture across the entire nuclear power industry and to assure that such an accident never occurs again. NSnet serves as a link between nuclear power enterprises, research organizations, and other bodies, based on the principles of equality and reciprocity. A variety of activities are pursued, such as diffusing a safety culture, implementing mutual evaluation among members, and exchanging safety-related information. Aiming to share and improve the safety culture throughout the entire nuclear power industry, NSnet thoroughly implements the principle of safety first, while at the same time making efforts to restore trust in nuclear power.

Safety Culture & Beliefs in the Nuclear Industry: Looking Forward, Looking Back

International Nuclear Information System (INIS)

Cox, S.

2016-01-01

This Keynote considers the role that the notion of safety culture has played in management of safety in the nuclear industry over recent decades. It does so through the lens of the industry’s beliefs about how such a notion might be applied to better understanding and preventing safety failures. Over the last 30 years, the nuclear industry has come to accept both the concept of safety culture and the possible role that it might play in safety management and safety failure. This development is to be welcomed in general terms but is not without its shortcomings in practice. These largely concern the operationalization of the concept and the way that it is often measured and managed. So what are the issues around the way that much of the industry currently believes that the notion of safety should be applied? The Keynote addresses this question. In doing so, it explores the changes that might be necessary for a fair test of the utility of safety culture in determining the quality of safety management and performance. The final point raised in this Keynote, is fundamental but missed by some. However cast, measured and managed, the concept of safety culture was never promoted as the sole determinant of safety management or the sole reason for safety failure. Therefore, judging the utility of the concept in relation to the quality of safety management in the nuclear industry can only be done logically in the context of those of the other factors involved. (author)

Incorporating Workplace Injury to Measure the Safety Performance of Industrial Sectors in Taiwan

Directory of Open Access Journals (Sweden)

Li-Ting Yeh

2017-12-01

Full Text Available The severity of workplace injuries varies by industry. Information on workplace injuries can enable firms and governments to effectively improve their safety performance based on the specific contexts of each industry. Incorporating the three workplace injury rates (being wounded or ill, disability, and death, a data envelopment analysis (DEA model is developed to evaluate the safety performance of 17 industrial sectors in Taiwan. The results suggest that the Taiwanese government should pay particular attention to the mining and quarrying industry, which has the lowest safety performance. Additionally, the results provide abundant information for the Taiwanese government to design industry safety regulations in a way that may prompt firms to develop a sustainable economy by improving their health and safety practices and enhancing their overall safety performance.

Safety applications of computer based systems for the process industry

International Nuclear Information System (INIS)

Bologna, Sandro; Picciolo, Giovanni; Taylor, Robert

1997-11-01

Computer based systems, generally referred to as Programmable Electronic Systems (PESs) are being increasingly used in the process industry, also to perform safety functions. The process industry as they intend in this document includes, but is not limited to, chemicals, oil and gas production, oil refining and power generation. Starting in the early 1970's the wide application possibilities and the related development problems of such systems were recognized. Since then, many guidelines and standards have been developed to direct and regulate the application of computers to perform safety functions (EWICS-TC7, IEC, ISA). Lessons learnt in the last twenty years can be summarised as follows: safety is a cultural issue; safety is a management issue; safety is an engineering issue. In particular, safety systems can only be properly addressed in the overall system context. No single method can be considered sufficient to achieve the safety features required in many safety applications. Good safety engineering approach has to address not only hardware and software problems in isolation but also their interfaces and man-machine interface problems. Finally, the economic and industrial aspects of the safety applications and development of PESs in process plants are evidenced throughout all the Report. Scope of the Report is to contribute to the development of an adequate awareness of these problems and to illustrate technical solutions applied or being developed

Safety practices in Jordanian manufacturing enterprises within industrial estates.

Science.gov (United States)

Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

2013-01-01

This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

Forklift safety a practical guide to preventing powered industrial truck incidents and injuries

CERN Document Server

Swartz, George

1999-01-01

Written for the more than 1.5 million powered industrial truck operators and supervisors in general industry, as well as those in the construction and marine industries, this Second Edition provides an updated guide to training operators in safety and complying with OSHA's 1999 forklift standard. This edition of Forklift Safety includes a new chapter devoted to the new OSHA 1910.178 standard and new information regarding dock safety, narrow aisle trucks, off-dock incidents, tip-over safety, pallet safety, and carbon monoxide.

Safety of industrial irradiation plants

International Nuclear Information System (INIS)

1992-01-01

Radiation is nowadays used in many applications in industry and medicine; accidental exposure, however, can have grave consequences as large doses of radiation occur in the 600 accelerator or gamma source plants in use around the world. This film explains the operation of irradiation plants and the safety procedures that must be followed to prevent accidents and to ensure safe use

Safety in times of crises - the importance of industrial emergency plans

International Nuclear Information System (INIS)

Rademacher, H.; Schulten, R.

1989-01-01

Technical and organizational precautions cannot always avoid everyday risks such as accidents, fire, explosions, and other critical situations which without appropriate countermeasures can easily develop into emergencies. While in recent years considerable efforts have been going into improving the technical safety of industrial plants particularly susceptible to accidents (e.g. the nuclear and chemical industry), organizational safety seems to have been neglected. An analysis of different accidents reveals human fallibility rather than technical failures to be causing damage in many cases. Industrial emergency plans are considered to be contributing to the improvement of organizational safety. (orig.) [de

Food Safety Practices in the Egg Products Industry.

Science.gov (United States)

Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K; Noyes, Gary

2016-07-01

We conducted a national census survey of egg product plants (n = 57) to obtain information on the technological and food safety practices of the egg products industry and to assess changes in these practices from 2004 to 2014. The questionnaire asked about operational and sanitation practices, microbiological testing practices, food safety training for employees, other food safety issues, and plant characteristics. The findings suggest that improvements were made in the industry's use of food safety technologies and practices between 2004 and 2014. The percentage of plants using advanced pasteurization technology and an integrated, computerized processing system increased by almost 30 percentage points. Over 90% of plants voluntarily use a written hazard analysis and critical control point (HACCP) plan to address food safety for at least one production step. Further, 90% of plants have management employees who are trained in a written HACCP plan. Most plants (93%) conduct voluntary microbiological testing. The percentage of plants conducting this testing on egg products before pasteurization has increased by almost 30 percentage points since 2004. The survey findings identify strengths and weaknesses in egg product plants' food safety practices and can be used to guide regulatory policymaking and to conduct required regulatory impact analysis of potential regulations.

The contribution of the industry sector to the construction of a European area of safety and radiation protection

International Nuclear Information System (INIS)

Zaiss, W.; Parker, G.; Glibert, M.

2010-01-01

The European Atomic Forum (FORATOM) is a trade association representing the European nuclear industry. Its main purpose is to promote the use of nuclear energy in Europe by representing the interests of this important and multi-faceted industrial sector. The European nuclear industry recognized that with the deregulation of the electricity market, diversity of national regulations could seriously distort competition. Therefore harmonizing regulatory practices is the best way of ensuring that the industry can evolve within a stable legal framework. In order to pool resources, the licensees launched mid 2005 ENISS (European Nuclear Installation Safety Standard Initiative) under the umbrella of FORATOM. The EU institutions have in recent years acknowledged nuclear energy as a key component of Europe's energy mix. Major European survey shows public acceptance of nuclear energy is on the increase. Support for discussion and debate on nuclear energy has been supported over the past few years by the European Union through the establishment of the European Nuclear Safety Regulators Group (ENSREG) and the European Nuclear Energy Forum (ENEF). FORATOM and ENISS have been a keen supporter and participant of the ENEF process. The European Nuclear Industry considers that the existing arrangements for ensuring nuclear safety in the EU under the guidance of international nuclear organisations, conventions and under the control of the national safety authorities have delivered excellent safety records. However, the industry has a role to play in the further harmonization processes and is therefore willing to contribute to the dialogue with all possible stakeholders. (author)

77 FR 24722 - Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability

Science.gov (United States)

2012-04-25

...] Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability AGENCY: Food and... safety assessment of nanomaterials in cosmetic products. This guidance is intended to assist industry in... Cosmetic Products.'' The draft guidance is intended to assist industry in identifying the potential safety...

Industry Leader Perceptions of Workplace Safety

Science.gov (United States)

Dunlap, Erik Scott

2009-01-01

This study investigated the perceptions of workplace safety held by industry leaders who were near completion of a Master of Business Administration (MBA) degree. This was a qualitative study that utilized interpretivism as the theoretical framework. The study sought to answer four research questions. (1) How do participants conceptualize…

Safety and Health Perceptions in Work-related Transport Activities in Ghanaian Industries

Directory of Open Access Journals (Sweden)

Charles Atombo

2017-06-01

Conclusion: OSH culture is not fully complied in industries transport activities. This study, therefore, supports the use of safety seminars and training sessions for industry workers responsible for transport operations for better integration of safety standards.

Usage of Safety Gloves in the Gold Mining Industry

CSIR Research Space (South Africa)

Scheepers, JCE

1978-10-01

Full Text Available The safety departments of 31 mines were visited, and the data obtained was used to determine to what extent safety gloves were being used in the gold mining industry. The frequency of occurrence of hand injuries amongst black workers of the gold...

Development and validation of a new safety climate scale for petrochemical industries.

Science.gov (United States)

Jafari, Mohammad Javad; Eskandari, Davood; Valipour, Firouz; Mehrabi, Yadollah; Charkhand, Hossein; Mirghotbi, Mostafa

2017-01-01

While a considerable body of research has studied safety climate and its role as a leading indicator of organizational safety, much of this work has been conducted with Western manufacturing samples. The current study puts emphasis on the cross-validation of a safety climate model in the non-Western industrial context of Iranian petrochemical industries. The current study was performed in one petrochemical company in Iran. The scale was developed through conducting a literature review followed by a qualitative study with expert participation. After performing a screening process, the initial number of items on the scale was reduced to 68. Ten dimensions (including management commitment, workers' empowerment, communication, blame culture, safety training, job satisfaction, interpersonal relationship, supervision, continuous improvement, and reward system) together with 37 items were extracted from the exploratory factor analysis (EFA) to measure safety climate. Acceptable ranges of internal consistency statistics for the sub-scales were observed. Confirmatory factor analysis (CFA) confirmed the construct validity of the developed safety climate scale for the petrochemical industry workers. The results of reliability showed that the Cronbach's alpha coefficient for the designed scale was 0.94. The ICC was obtained 0.92. This study created a valid and reliable scale for measuring safety climate in petrochemical industries.

USSR orders computers to improve nuclear safety

International Nuclear Information System (INIS)

Anon.

1990-01-01

Control Data Corp (CDC) has received an order valued at $32-million from the Soviet Union for six Cyber 962 mainframe computer systems to be used to increase the safety of civilian nuclear powerplants. The firm is now waiting for approval of the contract by the US government and Western Allies. The computers, ordered by the Soviet Research and Development Institute of Power Engineering (RDIPE), will analyze safety factors in the operation of nuclear reactors over a wide range of conditions. The Soviet Union's civilian nuclear program is one of the largest in the world, with over 50 plants in operation. Types of safety analyses the computers perform include: neutron-physics calculations, radiation-protection studies, stress analysis, reliability analysis of equipment and systems, ecological-impact calculations, transient analysis, and support activities for emergency response. They also include a simulator with realistic mathematical models of Soviet nuclear powerplants to improve operator training

A study for safety and health management problem of semiconductor industry in Taiwan.

Science.gov (United States)

Chao, Chin-Jung; Wang, Hui-Ming; Feng, Wen-Yang; Tseng, Feng-Yi

2008-12-01

The main purpose of this study is to discuss and explore the safety and health management in semiconductor industry. The researcher practically investigates and interviews the input, process and output of the safety and health management of semiconductor industry by using the questionnaires and the interview method which is developed according to the framework of the OHSAS 18001. The result shows that there are six important factors for the safety and health management in Taiwan semiconductor industry. 1. The company should make employee clearly understand the safety and health laws and standards. 2. The company should make the safety and health management policy known to the public. 3. The company should put emphasis on the pursuance of the safety and health management laws. 4. The company should prevent the accidents. 5. The safety and health message should be communicated sufficiently. 6. The company should consider safety and health norm completely.

Safety of Nanotechnology in Food Industries

Science.gov (United States)

Amini, Seyed Mohammad; Gilaki, Marzieh; Karchani, Mohsen

2014-01-01

The arrival of nanotechnology in various industries has been so rapid and widespread because of its wide-ranging applications in our daily lives. Nutrition and food service is one of the biggest industries to be affected by nanotechnology in all areas, changing even the nature of food itself. Whether it’s farming, food packaging, or the prevention of microbial contamination the major food industries have seen dramatic changes because of nanotechnology. Different nanomaterials such as nanopowders, nanotubes, nano-fibers, quantum dots, and metal and metal-oxide nanoparticles are globally produced in large quantities due to their broad applicability in food-related industries. Because of the unique properties of nanostructures and nanomaterials – such as a large surface area, high activity, and small size, there is some concern about the potential for harmful adverse effects of used nanomaterials on health or the environment. However, because of tremendous advances in different industries, this concern may be unnecessary. This paper presents some uses of nanomaterials in food and related industries and their possible side-effects. This review covers the various aspects of nanomaterials and their impact on human exposure, safety, and environmental concerns. PMID:25763176

Industrial safety in a nuclear decommissioning environment observations and lessons learned

International Nuclear Information System (INIS)

Brevig, D.

2008-01-01

Decommissioning activities present unusual and unexpected workplace safety challenges that go far beyond the traditional experience of nuclear power plant managers. A blend of state-of-the-art safety program management tools along with new and practical applications are required to ensure high industrial safety performance. The demanding and rigorously applied nuclear safety engineering standards that are accepted as normal and routine in the operation of a nuclear power facility, should transform as an industrial safety standard during the non-operating period of decommissioning. In addition, historical measures of non-nuclear industrial safety injury rates would or should not be acceptable safety behaviors during a nuclear decommissioning project. When complex projects, such as the decommissioning of a nuclear generating facility are undertaken, the workforce brings experience, qualifications, and assumptions to the project. The overall multi-year general schedule is developed, with more schedule details, for example, for the nearest rolling 12-18 months. Methods are established for the selection of contractors to assist in areas that are not normal tasks for the facility workforce, whose normal activity is managing and operating a nuclear generating station. However, it is critical to manage those contractors to the agreed work scope to ensure success is maintained by both parties, e.g. the job gets done, on schedule, on budget, all parties are financially whole when the work is complete, and safely. The purpose of this paper is to provide a perspective of nuclear plant personal safety in the ever changing industrial environment created by the demolition of robust and often radiologically contaminated structures in a nuclear facility decommissioning project. (author)

Industrial safety in a nuclear decommissioning environment observations and lessons learned

Energy Technology Data Exchange (ETDEWEB)

Brevig, D. [Independent Consultant, San Clemente (United States)

2008-07-01

Decommissioning activities present unusual and unexpected workplace safety challenges that go far beyond the traditional experience of nuclear power plant managers. A blend of state-of-the-art safety program management tools along with new and practical applications are required to ensure high industrial safety performance. The demanding and rigorously applied nuclear safety engineering standards that are accepted as normal and routine in the operation of a nuclear power facility, should transform as an industrial safety standard during the non-operating period of decommissioning. In addition, historical measures of non-nuclear industrial safety injury rates would or should not be acceptable safety behaviors during a nuclear decommissioning project. When complex projects, such as the decommissioning of a nuclear generating facility are undertaken, the workforce brings experience, qualifications, and assumptions to the project. The overall multi-year general schedule is developed, with more schedule details, for example, for the nearest rolling 12-18 months. Methods are established for the selection of contractors to assist in areas that are not normal tasks for the facility workforce, whose normal activity is managing and operating a nuclear generating station. However, it is critical to manage those contractors to the agreed work scope to ensure success is maintained by both parties, e.g. the job gets done, on schedule, on budget, all parties are financially whole when the work is complete, and safely. The purpose of this paper is to provide a perspective of nuclear plant personal safety in the ever changing industrial environment created by the demolition of robust and often radiologically contaminated structures in a nuclear facility decommissioning project. (author)

Uncertainty in safety : new techniques for the assessment and optimisation of safety in process industry

NARCIS (Netherlands)

Rouvroye, J.L.; Nieuwenhuizen, J.K.; Brombacher, A.C.; Stavrianidis, P.; Spiker, R.Th.E.; Pyatt, D.W.

1995-01-01

At this moment there is no standardised method for the assessment for safety in the process industry. Many companies and institutes use qualitative techniques for safety analysis while other companies and institutes use quantitative techniques. The authors of this paper will compare different

Industrial hygiene, occupational safety and respiratory symptoms in the Pakistani cotton industry.

Science.gov (United States)

Khan, Abdul Wali; Moshammer, Hanns Michael; Kundi, Michael

2015-04-02

In the cotton industry of Pakistan, 15 million people are employed and exposed to cotton dust, toxic chemicals, noise and physical hazards. The aim of this study was to determine the prevalence of health symptoms, particularly respiratory symptoms, and to measure cotton dust and endotoxin levels in different textile factories of Faisalabad, Pakistan. A cross-sectional investigation was performed in a representative sample of 47 cotton factories in the Faisalabad region in Punjab, Pakistan. Respiratory symptoms of 800 workers were documented by questionnaire. Occupational safety in the factories was assessed by a trained expert following a checklist, and dust and endotoxin levels in different work areas were measured. Prevalence of respiratory disease symptoms (fever, shortness of breath, chest tightness and cough) was generally high and highest in the weaving section of the cotton industry (20-40% depending on symptoms). This section also displayed the poorest occupational safety ratings and the highest levels of inhalable cotton dust (mean±SD 4.6±2.5 vs 0.95±0.65 mg/m(3) in compact units). In contrast, endotoxin levels were highest in the spinning section (median 1521 EU/m(3)), where high humidity is maintained. There are still poor working conditions in the cotton industry in Pakistan where workers are exposed to different occupational hazards. More health symptoms were reported from small weaving factories (power looms). There is a dire need for improvements in occupational health and safety in this industrial sector with particular focus on power looms. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Radiation safety training for industrial irradiators: What are we trying to accomplish?

International Nuclear Information System (INIS)

Smith, M.A.

1998-01-01

Radiation safety training at an industrial irradiator facility takes a different approach than the traditional methods and topics used at other facilities. Where the more routine industrial radiation users focus on standard training topics of contamination control, area surveys, and the traditional dogma of time, distance, and shielding, radiation safety in an industrial irradiation facility must be centered on preventing accidents. Because the primary methods for accomplishing that goal are engineering approaches such as safety system interlocks, training provided to facility personnel should address system operation and emergency actions. This presents challenges in delivering radiation safety training to an audience of varied educational and technical background where little to no commercially available training material specific to this type of operation exists

Management of health, safety and environment in process industry

DEFF Research Database (Denmark)

Duijm, Nijs Jan; Fiévez, C.; Gerbec, M.

2008-01-01

The present status of industrial HSE management in a number of EU member states is reviewed, with a focus on the integration of health, safety and environment in single management systems. The review provides insight into the standards and paradigms adopted by industry, and it identifies trends...

Responsibility for managing and legal consequences in the field of industrial safety

International Nuclear Information System (INIS)

Buedenbender, U.

1987-01-01

The object of industrial safety is to protect the aspirations, the life and the health of the employee from injury and by accident prevention in the field to combat dangers to life and health. The necessity for industrial safety is just as uncontentious as the objectives pursued by it. There is also a humanitarian connotation here since the health and welfare of employees are of central importance. In addition, economic aspects have to be taken into consideration, for industrial accidents mean unnecessary industrial costs which can have not insignificant economic consequences. Boards of directors, heads of various departments in the hierarchy, also the members of those departments must be absolutely clear as to what are the requirements for industrial safety in detail, what consequences arise for the introduction and organization of industrial processes right through the organization of the enterprise itself and how in this respect responsibilities are to be allocated to those affected. (orig.) [de

Industrial safety and fire protection during the construction phase

International Nuclear Information System (INIS)

Zimmer, K.

1977-01-01

The questions and problems of industrial safety and fire prevention have to be treated like the activities planning, developing, assembly, etc. This statement is illustrated by statistics of the fire insurance companies, from which it can be seen that the number of fire accidents has decreased but that the damage caused has greatly increased. The sooner the fire prevention and industrial safety measures are integrated in the planning phase, the better for the total costs. Preventive measures that possibly have to be introduced at a later stage are not only generally much more expensive but are also seldom as effective. (orig./HK) [de

Decommissioning of Medical, Industrial and Research Facilities. Safety Guide

International Nuclear Information System (INIS)

2010-01-01

Radioactive waste is produced in the generation of nuclear power and the use of radioactive materials in industry, research and medicine. The importance of the safe management of radioactive waste for the protection of human health and the environment has long been recognized, and considerable experience has been gained in this field. The IAEA's Radioactive Waste Safety Standards Programme aimed at establishing a coherent and comprehensive set of principles and requirements for the safe management of waste and formulating the guidelines necessary for their application. This is accomplished within the IAEA Safety Standards Series in an internally consistent set of publications that reflect an international consensus. The publications will provide Member States with a comprehensive series of internationally agreed publications to assist in the derivation of, and to complement, national criteria, standards and practices. The Safety Standards Series consists of three categories of publications: Safety Fundamentals, Safety Requirements and Safety Guides. With respect to the Radioactive Waste Safety Standards Programme, the set of publications is currently undergoing review to ensure a harmonized approach throughout the Safety Standards Series. This Safety Guide addresses the subject of decommissioning of medical, industrial and research facilities where radioactive materials and sources are produced, received, used and stored. It is intended to provide guidance to national authorities and operating organizations, particularly to those in developing countries (as such facilities are predominant in these countries), for the planning and safe management of the decommissioning of such facilities. The Safety Guide has been prepared through a series of Consultants meetings and a Technical Committee meeting

Decommissioning of medical, industrial and research facilities. Safety guide

International Nuclear Information System (INIS)

2005-01-01

Radioactive waste is produced in the generation of nuclear power and the use of radioactive materials in industry, research and medicine. The importance of the safe management of radioactive waste for the protection of human health and the environment has long been recognized, and considerable experience has been gained in this field. The IAEA's Radioactive Waste Safety Standards Programme aimed at establishing a coherent and comprehensive set of principles and requirements for the safe management of waste and formulating the guidelines necessary for their application. This is accomplished within the IAEA Safety Standards Series in an internally consistent set of publications that reflect an international consensus. The publications will provide Member States with a comprehensive series of internationally agreed publications to assist in the derivation of, and to complement, national criteria, standards and practices. The Safety Standards Series consists of three categories of publications: Safety Fundamentals, Safety Requirements and Safety Guides. With respect to the Radioactive Waste Safety Standards Programme, the set of publications is currently undergoing review to ensure a harmonized approach throughout the Safety Standards Series. This Safety Guide addresses the subject of decommissioning of medical, industrial and research facilities where radioactive materials and sources are produced, received, used and stored. It is intended to provide guidance to national authorities and operating organizations, particularly to those in developing countries (as such facilities are predominant in these countries), for the planning and safe management of the decommissioning of such facilities. The Safety Guide has been prepared through a series of Consultants meetings and a Technical Committee meeting

OCCUPATIONAL HEALTH AND SAFETY ISSUES IN VICTORIAN CONSTRUCTION INDUSTRY, AUSTRALIA

OpenAIRE

M. Asad, Abdurrahman

2010-01-01

The construction industry has one of the highest injury ratios of all Australian industries. Individuals employed on the construction industries find themselves confronted with dangerous and life-threatening work conditions. However, it appears that the trend in Occupational Health and Safety (OHS) performance of construction industry has improved consistently compared with the other industries. The enforcement of OHS law and regulation, and the outcome of authority function to assist and pro...

Ecological safety of thermal power industry and investments

International Nuclear Information System (INIS)

Glebov, V.P.

1995-01-01

Evaluation of ecological safety of domestic fossil fuel thermal power industry is given in comparison with foreign one. Ways of solving ecological problems are considered. They are based on introduction of new technologies, providing decrease of ecological effect, on development of effective ash-and sulfur-trapping, nitrogen purification equipment, on production of ecologically improved fuel. The necessity of investments to power industry is noted

Behavioral Safety in the Food Services Industry: Challenges and Outcomes

Science.gov (United States)

Lebbon, Angela; Sigurdsson, Sigurdur Oli; Austin, John

2012-01-01

During the course of a 6-year behavioral safety consult at a food and drink industry site, data were collected on the number of Occupational Safety Health Administration (OSHA) recordable incidents, number of lost and restricted days, and number of peer safety observations. Employees were trained to identify safe and unsafe behavior, conduct peer…

Preliminary study on improving safety culture in Malaysian nuclear industries

International Nuclear Information System (INIS)

Ibrahim, Sabariah Kader; Lee, Y. E.

2012-01-01

This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed

Preliminary study on improving safety culture in Malaysian nuclear industries

Energy Technology Data Exchange (ETDEWEB)

Ibrahim, Sabariah Kader [KAIST, Daejeon (Korea, Republic of); Lee, Y. E. [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2012-10-15

This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed.

Safety and health in the petrochemical industry in Map Ta Phut, Thailand.

Science.gov (United States)

Langkulsen, Uma; Vichit-Vadakan, Nuntavarn; Taptagaporn, Sasitorn

2011-01-01

Petrochemical industries are known as sources of many toxic chemicals. Safety and health risks of the petrochemical workers employed at Map Ta Phut Industrial Estate, located in Rayong, Thailand, are potentially high. The research materials consisted of documents emanating from statutory reports on safety in working with toxic chemicals and the results of interviews by questionnaire among 457 petrochemical workers regarding occupational health and safety issues. Most of workers who were working with toxic chemicals had knowledge and awareness of health risks and chemical hazards at work. We found that safe behavior at work through read the safety information among operational workers less than non-operational workers around 10%. Most of workers had perceived occupational health and safety management in their companies. Some companies revealed that they had not been performing biological monitoring of blood or urine for their health examination reports and that workplace exposure monitoring had not correlated well with health examination of workers. Our study suggested that occupational health and safety for petrochemical industries requires standards and guidelines for workers' health surveillance aimed at protection of workers.

Safety Performance Index Industri Batik Tulis Berdasarkan Kriteria Majemuk

Directory of Open Access Journals (Sweden)

Nachnul Ansori

2015-12-01

Full Text Available Accident generally occurs due to the activities which is done in unsafe conditions or even unsafe behavior. These conditions can influence workers productivity. In batik industries, those workers use toxic material and work in non ergonomic atmosphere. Moreover, they also do not take care of the environment and do not use personal protective equipments (PPE. Workers at Madura batik SMEs have not fully realized the significance of occupational health and safety (OHS in their working areas. The aims of this research is to evaluate OHS performance based on the indicators of safety performance index (SPI, which is multicriteria, in that industri. The safety performance attributes were obtained from factor analysis from the previous study. The index is calculated based on the weighted evaluation results of critical behavior checklist (CBC, integrated with analytical hierarchy process (AHP. As the results, we should give priority to improve the knowledge and experience toward OHS of the workers and also improve the working environment of the Madura’s batik industries. Additionally, the performance of OHS in coloring process is also on the threshold of unsafe condition, further development on the coloring process is needed.

Safety climate and safety behaviors in the construction industry: The importance of co-workers commitment to safety.

Science.gov (United States)

Schwatka, Natalie V; Rosecrance, John C

2016-06-16

There is growing empirical evidence that as safety climate improves work site safety practice improve. Safety climate is often measured by asking workers about their perceptions of management commitment to safety. However, it is less common to include perceptions of their co-workers commitment to safety. While the involvement of management in safety is essential, working with co-workers who value and prioritize safety may be just as important. To evaluate a concept of safety climate that focuses on top management, supervisors and co-workers commitment to safety, which is relatively new and untested in the United States construction industry. Survey data was collected from a cohort of 300 unionized construction workers in the United States. The significance of direct and indirect (mediation) effects among safety climate and safety behavior factors were evaluated via structural equation modeling. Results indicated that safety climate was associated with safety behaviors on the job. More specifically, perceptions of co-workers commitment to safety was a mediator between both management commitment to safety climate factors and safety behaviors. These results support workplace health and safety interventions that build and sustain safety climate and a commitment to safety amongst work teams.

Project for the completion of a probabilistic safety analysis of an industrial irradiation

International Nuclear Information System (INIS)

Ferro, R.; Troncoso, M.

1995-01-01

The probabilistic safety analysis is a very valuable instrument in safety studies of facilities with potential risk for the personnel, population and environment. One of the possible field of use of PSA techniques in the safety studies for industrial irradiation where serious accidents have occurred. For this reason a project has been undertaken to carry out the PSA in the Irradiation Plant of Research Institute of the Food Industry, which complements the safety studies of this facility

Safe or sorry: Feds criminalize safety breaches, while industry record improves with time

Energy Technology Data Exchange (ETDEWEB)

Collison, M.

2004-05-01

An overview of safety conditions in Canada's oilpatch is provided, inclusive of a review of historical developments of safety practices by the industry itself, and evolving safety legislation by the provincial and federal governments. The general picture that emerges is that while great strides have been made in legislation, training and safety practices, incidents still occur; employees are still injured and sometimes die. In 2003, for example, there were almost 156,000 work-related injuries reported; of these more than 39,000 were serious enough for the worker to miss work beyond the day of the accident. Nearly 52,000 of the injured workers were inexperienced. There were 127 workplace fatalities; of these eight workers were under the age of 25. Vehicle collisions were the source of the greatest number of accidents; 25 per cent of all work-related deaths were due to traffic trauma. The oil and gas industry spawns an incredible range of hazards; everything from bear maulings and badger holes to sour gas leaks, people falling or equipment falling on them, or workers getting caught in moving equipment parts. The federal and provincial governments are major actors in the field of occupational safety, while the industry provides industry-recommended practices through the Petroleum Safety Council. The Council has also developed a basic safety awareness training package to provide smaller companies with effective training tools, and special programs targeted to the needs of new workers and international employees, in an effort to bridge differences in cultural attitudes towards the work environment. English language competence of newcomers to Canada is an area of special concern to the industry, along with a wide variety of safety training programs run by the Petroleum Industry Training Service. The Work Safe Alberta Information Sharing Network (www.worksafely.org) is another useful tool in gaining access to safety consultants, safety e-tools, and safety related

Hazard and safety in the nuclear industry

International Nuclear Information System (INIS)

Tadmor, J.

1978-01-01

Although the number of victims in the nuclear industry has been extremely low as compared with the number of victims in other spheres of human activity society has been willing to put up with a high number of accidents resulting in few victims per accident but refuses to accept an extremely rare accident resulting in a high number of victims. The U.S. nuclear industry is spending almost 2000 dollars for each reduction of a man x rem unit and this investment raises the ''man-life value'' in the nuclear industry to 10 million dollars as compared with 10,000 to 20,000 dollars spent in other activities (roentgen, early cancer detection, etc.). To reduce the exaggerated burden placed on the nuclear industry the safety expenditures should be spread over a maximum possible range of human activities. (B.G.)

Order of 10 october 1977 on the special safety measures applicable to certain large nuclear installations

International Nuclear Information System (INIS)

1978-01-01

This Order by the Minister of Industry, Commerce and Crafts and the Minister of Labour was made in implementation of Section 40 of Decree No. 75-306 of 28 April 1975 on the protection of workers against the hazards of ionizing radiation in large nuclear installations. It lays down the safety measures applicable to nuclear reactors and ancillary facilities, particle accelerators, irradiated fuel reprocessing plants and facilities for the storage of radioactive waste. (NEA) [fr

75 FR 14609 - Commercial Fishing Industry Vessel Safety Advisory Committee; Vacancies

Science.gov (United States)

2010-03-26

... which Chapter 45 of Title 46, U.S.C. applies and persons representing the marine insurance industry... Industry Vessel Safety Advisory Committee; Vacancies AGENCY: Coast Guard, DHS. ACTION: Request for applications. SUMMARY: The Coast Guard seeks applications for membership on the Commercial Fishing Industry...

Applying the behaviour grid for improving safety in industrial environments

NARCIS (Netherlands)

Boer, de J. (Johannes); Heylen, D. (Dirk); Teeuw, W.B. (Wouter)

2013-01-01

The Saxion University of Applied Sciences recently started its “Safety at Work” project. Its objective is to increase safety in the workplace by combining and applying state-of-the-art factors from Ambient Intelligence, Industrial & Product Design and Smart Materials [1].The human

Explosion safety in industrial electrostatics

Science.gov (United States)

Szabó, S. V.; Kiss, I.; Berta, I.

2011-01-01

Complicated industrial systems are often endangered by electrostatic hazards, both from atmospheric (lightning phenomenon, primary and secondary lightning protection) and industrial (technological problems caused by static charging and fire and explosion hazards.) According to the classical approach protective methods have to be used in order to remove electrostatic charging and to avoid damages, however no attempt to compute the risk before and after applying the protective method is made, relying instead on well-educated and practiced expertise. The Budapest School of Electrostatics - in close cooperation with industrial partners - develops new suitable solutions for probability based decision support (Static Control Up-to-date Technology, SCOUT) using soft computing methods. This new approach can be used to assess and audit existing systems and - using the predictive power of the models - to design and plan activities in industrial electrostatics.

Industrial safety and applied health physics. Annual report for 1977

International Nuclear Information System (INIS)

Auxier, J.A.; Davis, D.M.

1978-06-01

Progress is reported on the following: radiation monitoring with regard to personnel monitoring and health physics instrumentation; environs surveillance with regard to atmospheric monitoring, water monitoring, radiation background measurements, and soil and grass samples; radiation and safety surveys with regard to laboratory operations monitoring, radiation incidents, and laundry monitoring; industrial safety and special projects with regard to accident analysis, disabling injuries, and safety awards

Cross-Index to DOE-prescribed industrial safety codes and standards

International Nuclear Information System (INIS)

1980-01-01

This Cross-Index volume is the 1980 compilation of detailed information from more than two hundred and ninety Department of Energy (DOE) prescribed or Occupational Health and Safety Administration (OSHA) referenced industrial safety codes and standards. The compilation of this material was conceived and initiated in 1973, and is revised yearly to provide information from current codes. Condensed data from individual code portions are listed according to reference code, section, paragraph, and page. Each code is given a two-digit reference code number or letter in the Contents section. This reference code provides ready identification of any code listed in the Cross-Index. The computerized information listings are on the left-hand portion of Cross-Index page; in order to the right of the listing are the reference code letters or numbers, the section, paragraph, and page of the referenced code containing expanded information on the individual listing. Simplified How to Use directions are listed. A glossary of letter initials/abbreviations for the organizations or documents, whose codes or standards are contained in this Cross-Index, is included

Factors Contribute to Safety Culture in the Manufacturing Industry in Malaysia

OpenAIRE

Ong Choon Hee

2014-01-01

The purpose of this paper is to explain the role of safety culture in the manufacturing industry in Malaysia and identify factors contribute to safety culture. It is suggested in this study that leadership support, management commitment and safety management system are important factors that contribute to safety culture. This study also provides theoretical implications to guide future research and offers practical implications to the managers in the development of safety culture. Given that ...

Evaluation model for safety capacity of chemical industrial park based on acceptable regional risk

Institute of Scientific and Technical Information of China (English)

Guohua Chen; Shukun Wang; Xiaoqun Tan

2015-01-01

The paper defines the Safety Capacity of Chemical Industrial Park (SCCIP) from the perspective of acceptable regional risk. For the purpose of exploring the evaluation model for the SCCIP, a method based on quantitative risk assessment was adopted for evaluating transport risk and to confirm reasonable safety transport capacity of chemical industrial park, and then by combining with the safety storage capacity, a SCCIP evaluation model was put forward. The SCCIP was decided by the smaller one between the largest safety storage capacity and the maximum safety transport capacity, or else, the regional risk of the park will exceed the acceptable level. The developed method was applied to a chemical industrial park in Guangdong province to obtain the maximum safety transport capacity and the SCCIP. The results can be realized in the regional risk control of the park effectively.

Radiation safety in Australia's mineral sands industry

International Nuclear Information System (INIS)

Hughes, W.

1989-06-01

This brochure is part of a training package aiming to explain in simple terms what radiation is, how it affects people's lives and how, in the specific case of the mineral sand industry, the risk of ill-effects from low-level radioactivity could be effectively guarded against by simple and easily followed safety precautions. ills

Industrial Fuel Gas Demonstration Plant Program. Task III, Demonstration plant safety, industrial hygiene, and major disaster plan (Deliverable No. 35)

Energy Technology Data Exchange (ETDEWEB)

None

1980-03-01

This Health and Safety Plan has been adopted by the IFG Demonstration Plant managed by Memphis Light, Gas and Water at Memphis, Tennessee. The plan encompasses the following areas of concern: Safety Plan Administration, Industrial Health, Industrial Safety, First Aid, Fire Protection (including fire prevention and control), and Control of Safety Related Losses. The primary objective of this plan is to achieve adequate control of all potentially hazardous activities to assure the health and safety of all employees and eliminate lost work time to both the employees and the company. The second objective is to achieve compliance with all Federal, state and local laws, regulations and codes. Some thirty specific safe practice instruction items are included.

Organisation of work safety in the mining industry; Sicherheitsorganisation im Bergbau

Energy Technology Data Exchange (ETDEWEB)

Didier, V. [Bergbau-Berufsgenossenschaft, Bochum (Germany). Referat Unfallverhuetung

1999-10-07

The paper summarizes the main findings of a scientific study. Accident figures for the German mining industry indicate that, in comparison with other industries, there is still plenty of scope for increased prevention. However, the rapid development of safety technology alone is still yielding diminishing returns. The main route to increased safety in the mining industry is by way of improved safety management. Various methods are available for analyzing the efficiency of work-safety structures and procedures. Models for the classification of safety-relevant tasks are based on the legally appropriate and organisationally expedient allocation of responsibilities between management and safety experts. An important management tool in this respect is the hazard analysis procedure laid down in the European Union's Health and Safety at Work Act. Practical studies are used to illustrate that safety results can be improved through reorganisation without increasing prime costs. (orig.) [German] Der Beitrag fasst die wesentlichen Ergebnisse einer wissenschaftlichen Studie zusammen: Die Unfallentwicklung im deutschen Bergbau zeigt im Vergleich zu anderen Industriezweigen noch deutliche Reserven fuer die Praevention. Die Fortentwicklung der Sicherheitstechnik fuer sich allein liefert aber nur noch abnehmende Grenzertraege. Eine Strategie technischer und organisatorischer Einzeldirektiven reicht ebenfalls nicht aus. Der Weg zu besseren Sicherheitsresultaten im Bergbau fuehrt vor allem ueber optimierte Ablaeufe des Sicherheitsmanagements. Mit verschiedenen Methoden lassen sich Aufbau- und Ablauforganisation der Arbeitssicherheit auf ihre Effizienz untersuchen. Aus der juristisch implizierten und organisatorisch zweckmaessigen Aufgabenteilung zwischen Fuehrungskraeften und Sicherheitsexperten ergeben sich Zurodnungsmuster fuer sicherheitsrelevante Aufgaben. Ein wichtiges Fuehrungsinstrument sind Gefaehrdungsanalysen nach dem Arbeitsschutzrecht der Europaeischen Union. Anhand

Control of Industrial Safety Based on Dynamic Characteristics of a Safety Budget-Industrial Accident Rate Model in Republic of Korea

Directory of Open Access Journals (Sweden)

Gi Heung Choi

2017-06-01

Conclusion: A simple feedback control with proportional–integral action is effective in prevention of industrial accidents. Securing a lower level of elastic industrial accident-driving energy appears to have dominant effects on the control performance compared with the damping effort to dissipate such energy. More attention needs to be directed towards physical and social feedbacks that have prolonged cumulative effects. Suggestions for further improvement of the safety system including physical and social feedbacks are also made.

Evaluation of safety practices and performance in a brewery industry ...

African Journals Online (AJOL)

Evaluation of safety practices and performance in a brewery industry in Nigeria between 2000 – 2007. ... Journal of Applied Sciences and Environmental Management ... The study revealed that a total of 156 accidents were prevented in the period of the safety programme which translates to an average of 19.45 per year.

Evaluation of food safety management systems in Serbian dairy industry

Directory of Open Access Journals (Sweden)

Igor Tomašević

2016-01-01

Full Text Available This paper reports incentives, costs, difficulties and benefits of food safety management systems implementation in the Serbian dairy industry. The survey involved 27 food business operators with the national milk and dairy market share of 65 %. Almost two thirds of the assessed dairy producers (70.4 % claimed that they had a fully operational and certified HACCP system in place, while 29.6 % implemented HACCP, but had no third party certification. ISO 22000 was implemented and certified in 29.6 % of the companies, while only 11.1 % had implemented and certified IFS standard. The most important incentive for implementing food safety management systems for Serbian dairy producers was to increase and improve safety and quality of dairy products. The cost of product investigation/analysis and hiring external consultants were related to the initial set-up of food safety management system with the greatest importance. Serbian dairy industry was not greatly concerned by the financial side of implementing food safety management systems due to the fact that majority of prerequisite programmes were in place and regularly used by almost 100 % of the producers surveyed. The presence of competency gap between the generic knowledge for manufacturing food products and the knowledge necessary to develop and implement food safety management systems was confirmed, despite the fact that 58.8 % of Serbian dairy managers had university level of education. Our study brings about the innovation emphasizing the attitudes and the motivation of the food production staff as the most important barrier for the development and implementation of HACCP. The most important identified benefit was increased safety of dairy products with the mean rank scores of 6.85. The increased customer confidence and working discipline of staff employed in food processing were also found as important benefits of implementing/operating HACCP. The study shows that the level of HACCP

Testing laboratories, its function in ensuring industrial safety

International Nuclear Information System (INIS)

Sanchez Fernandez, M.

2015-01-01

This article discusses and justifies the development of industrial laboratories (testing and calibration) in Spain, since its embryo, its creation and development, to the present day. Likewise, presents its interrelation with other agents, as well as the legislative and technical framework is application along to the years. Within this development of the sector, highlights the period of the conformity assessment, and consequently its relationship with Industrial safety. Finally, describes the organizational situation of the sector both nationally and internationally. (Author)

EMPLOYEE PERCEPTIONS OF OCCUPATIONAL HEALTH AND SAFETY STANDARDS IN THE STEEL INDUSTRY

Directory of Open Access Journals (Sweden)

J. Mojapelo

2016-07-01

Full Text Available The inability to follow occupational health and safety standards typically resultsin accidents that place severe financial burdens on both employees as well asorganisations. The aim of this studyis to explore the perceptionsof employees inthe steel industry towards occupational health and safety standards in the steelindustry in South Africa. A survey was conducted in which a structuredquestionnaire was distributed to a purposive sample of 165 employees employedby a largesteel processing company in Gauteng Province. The collected data wereanalysed using SPSS (Version 22.0. A combination of descriptive statistics andanalysis of mean scores was applied to meet the aim of the study. The resultsreveal that employees in the steel industry perceived that occupational health andsafety standards were satisfactory in all seven occupational health and safetydimensions considered in this study. These are (1 information and training, (2health and safety awareness, (3 employee behaviour (4 role of the supervisor, (5health and safety reporting mechanisms, (6 workplace inspection, and (7workplace environment. Among these dimensions, safety awareness emerged asthe most important dimension to employees. The results may be utilised bymanagers in the steel industry to identify and direct their attention to the keyoccupational health and safety factors in their different contexts.

Safety, economic incentives and insurance in the Norwegian petroleum industry

International Nuclear Information System (INIS)

Osmundsen, Petter; Aven, Terje; Erik Vinnem, Jan

2008-01-01

There is an increased use of key performance indicators and incentive schemes in the petroleum industry. Applying modern incentive theory, we explore what implications this management trend has for injury and major accident prevention efforts and safety. Can economic incentives be designed for accident prevention activities? In cases where this is not possible, what are the challenges for the safety efforts? In particular, how are safety efforts affected by enhanced economic incentives for other performance dimensions like production and rate of return? Can safety be neglected? What remedies are available?

The promotion of work safety. A continuous task for the Swiss gas industry

International Nuclear Information System (INIS)

Luescher, H.J.

1993-01-01

The modern Western European population values the work safety very highly because of ethical and economical reasons. In Switzerland too, safety at work is actively promoted. Based on national legislation and on the SGWA-Association Statutes, the Swiss Gas Industry, with great engagement, promotes the measures for accident prevention. Following a general introduction into the legislative basis, possible ways and means for the promotion of safety at work are described. Subsequently, the concrete activities of the Gas Supply Authorities and the SGWA are pointed out, followed by a description of the future work-safety programmes of the Swiss Gas Industry. (orig.) [de

Process Control Systems in the Chemical Industry: Safety vs. Security

Energy Technology Data Exchange (ETDEWEB)

Jeffrey Hahn; Thomas Anderson

2005-04-01

Traditionally, the primary focus of the chemical industry has been safety and productivity. However, recent threats to our nation’s critical infrastructure have prompted a tightening of security measures across many different industry sectors. Reducing vulnerabilities of control systems against physical and cyber attack is necessary to ensure the safety, security and effective functioning of these systems. The U.S. Department of Homeland Security has developed a strategy to secure these vulnerabilities. Crucial to this strategy is the Control Systems Security and Test Center (CSSTC) established to test and analyze control systems equipment. In addition, the CSSTC promotes a proactive, collaborative approach to increase industry's awareness of standards, products and processes that can enhance the security of control systems. This paper outlines measures that can be taken to enhance the cybersecurity of process control systems in the chemical sector.

Industrial radiography in the Philippines: safety concerns

International Nuclear Information System (INIS)

David, Jocelyn L.; Artificio, Thelma P.; Cerbolles, Justina S.; Caseria, Estrella S.; Agron, Inocencio A.

2005-01-01

Industrial radiography utilizes the highest activity (5.55 tera becquerel (TBq) to 7.4 TBq) among the various mobile application of radioisotopes. It is highly possible that radiographers exceed the annual dose limits for workers occupationally exposed to radiation (as prescribed in the Code of PNRI Regulations part 3) if they do not give cautious consideration to the factors that determine the radiation dose, namely: the gamma source dose rates, time distance and shielding. To enhance the safety culture among radiographers, various strategies are recommended to be undertaken by the Philippine Nuclear Research Institute as well as the licensed companies undertaking activities in industrial radiography. (Authors)

Comparison of Safety Perception between Foreign and Local Workers in the Construction Industry in Republic of Korea

Directory of Open Access Journals (Sweden)

Serdar Korkmaz

2018-03-01

Full Text Available Background: Since the Republic of Korea became a labor-force-importing country, the number of foreign workers has increased gradually, especially in the construction industry. The main objective of this study was to examine the differences in safety perception between domestic and foreign workers at Korean construction sites. Methods: A total of 891 Korean and foreign workers were surveyed: 140 foreign and 751 Korean workers. The general characteristics and 25 factors influencing safety perception were considered in the questionnaire. Regression and correlation analyses were conducted to examine the variables of workers' safety perception. Results: Differences of nationality (F = 7.379, p < 0.001 and workplace accidents were statistically significant for both domestic (F = 1.503, p < 0.05 and foreign workers (F = 7.868, p < 0.05. In contrast, age, education, and Korean language level were significant variables only for foreign workers. Correlation coefficients of 0.428** for Korean and 0.148 for foreign workers between two items – namely, “management's commitment to safety” and “blaming staff when they make mistakes” – support the conclusion that foreign workers do not trust management's commitment to safety, while Korean workers have confidence in these commitments. Conclusion: Foreign workers' level of safety perception should rise to the same level as Korean workers, especially in terms of obeying safety rules, safety education performance, and safety beliefs. Therefore, an improvement plan for the Korean construction industry is suggested in order to have a better safety level at construction sites with foreign workers. Keywords: construction, foreign workers, Korean workers, safety perception

Improvement And Development Of The Motivation System In The Occupational And Industrial Safety Field

Science.gov (United States)

Pavlov, Arkhip; Gavrilov, Dmitrij

2017-11-01

This paper discusses one of the main problems in labour and industrial management in the occupational and industrial safety field - motivation to work safely. The problem is complex and should be solved by a set of measures, where the assignment of responsibility to employees for the results of their work is absent, including in the field of labour protection and industrial safety. In accordance with the obligatory management principles, employees' work resolves to the strict implementation of the actions prescribed by the regulations. The responsibility for the negative result rests with the person who enacted or instructs employees. Thus, the employee is practically exempt from responsibility for the final result. One of the possible solutions to this problem is to put an assignment of responsibility on the employees for the results of their activities also in the occupational and industrial safety field. This is illustrated by the experience of other states, particularly of Australia. In conclusion suggestions for improvement and development of the motivation system in the field of occupational and industrial safety.

Improvement And Development Of The Motivation System In The Occupational And Industrial Safety Field

Directory of Open Access Journals (Sweden)

Pavlov Arkhip

2017-01-01

Full Text Available This paper discusses one of the main problems in labour and industrial management in the occupational and industrial safety field - motivation to work safely. The problem is complex and should be solved by a set of measures, where the assignment of responsibility to employees for the results of their work is absent, including in the field of labour protection and industrial safety. In accordance with the obligatory management principles, employees' work resolves to the strict implementation of the actions prescribed by the regulations. The responsibility for the negative result rests with the person who enacted or instructs employees. Thus, the employee is practically exempt from responsibility for the final result. One of the possible solutions to this problem is to put an assignment of responsibility on the employees for the results of their activities also in the occupational and industrial safety field. This is illustrated by the experience of other states, particularly of Australia. In conclusion suggestions for improvement and development of the motivation system in the field of occupational and industrial safety.

A Customized Vision System for Tracking Humans Wearing Reflective Safety Clothing from Industrial Vehicles and Machinery

Science.gov (United States)

Mosberger, Rafael; Andreasson, Henrik; Lilienthal, Achim J.

2014-01-01

This article presents a novel approach for vision-based detection and tracking of humans wearing high-visibility clothing with retro-reflective markers. Addressing industrial applications where heavy vehicles operate in the vicinity of humans, we deploy a customized stereo camera setup with active illumination that allows for efficient detection of the reflective patterns created by the worker's safety garments. After segmenting reflective objects from the image background, the interest regions are described with local image feature descriptors and classified in order to discriminate safety garments from other reflective objects in the scene. In a final step, the trajectories of the detected humans are estimated in 3D space relative to the camera. We evaluate our tracking system in two industrial real-world work environments on several challenging video sequences. The experimental results indicate accurate tracking performance and good robustness towards partial occlusions, body pose variation, and a wide range of different illumination conditions. PMID:25264956

Promoting safety culture in radiation industry through radiation audit

International Nuclear Information System (INIS)

Noriah, M.A.

2007-01-01

This paper illustrates the Malaysian experience in implementing and promoting effective radiation safety program. Current management practice demands that an organization inculcate culture of safety in preventing radiation hazard. The aforementioned objectives of radiation protection can only be met when it is implemented and evaluated continuously. Commitment from the workforce to treat safety as a priority and the ability to turn a requirement into a practical language is also important to implement radiation safety policy efficiently. Maintaining and improving safety culture is a continuous process. There is a need to establish a program to measure, review and audit health and safety performance against predetermined standards. This program is known as radiation safety audit and is able to reveal where and when action is needed to make improvements to the systems of controls. A structured and proper radiation self-auditing system is seen as the sole requirement to meet the current and future needs in sustainability of radiation safety. As a result safety culture, which has been a vital element on safety in many industries can be improved and promote changes, leading to good safety performance and excellence. (author)

An overview of applications and radiation safety aspects of linear accelerators in Brazilian industry

International Nuclear Information System (INIS)

Lourenco, M.J.M.; Silva, F.C.A. da

2002-01-01

This work presents a brief description of the situation of Brazilian Regulatory Authority about safety control on Industrial Linear Accelerators Installations. It shows the national regulatory infrastructure responsible for radiation safety inspections, the regulation infrastructure, the national inventory of industrial installations, the national system of inspection and enforcement and the national system for qualifying the radiation protection officer. Some results of regulatory safety inspections are also showed in this work. (author)

Fractional Order Models of Industrial Pneumatic Controllers

Directory of Open Access Journals (Sweden)

Abolhassan Razminia

2014-01-01

Full Text Available This paper addresses a new approach for modeling of versatile controllers in industrial automation and process control systems such as pneumatic controllers. Some fractional order dynamical models are developed for pressure and pneumatic systems with bellows-nozzle-flapper configuration. In the light of fractional calculus, a fractional order derivative-derivative (FrDD controller and integral-derivative (FrID are remodeled. Numerical simulations illustrate the application of the obtained theoretical results in simple examples.

Survey of Safety Climate in a Petrochemical Industry in Mahshahr

Directory of Open Access Journals (Sweden)

Y. Shokoohi

2012-07-01

Results and Discussion: Average score of the industry's safety climate was obtained 5.9. Of 17 studied dimensions, 9 dimensions were weak (score less than 6. Lowest score were related to Event & Accident and Change management dimensions. Highest score were related to Individual priorities and need for safety (8.65. Generally relationship between individual variables (ages, work experience, education and safety climate were not significant (P>0.05. Conclusion: Generally one can conclude that individual variables such as age, education and experience have not significant effect on safety climate. It seems that top management forms the organizational climate and consequently safety climate. It reaffirms the basic principle of senior management commitment to safety and its role in preventing accidents. Thus safety climate can be used as a good method for assessing Occupational Health and Safety Management Performance.

Industrial Personal Computer based Display for Nuclear Safety System

International Nuclear Information System (INIS)

Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min

2014-01-01

The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view

Industrial Personal Computer based Display for Nuclear Safety System

Energy Technology Data Exchange (ETDEWEB)

Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min [KEPCO, Youngin (Korea, Republic of)

2014-08-15

The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view.

Mixed results in the safety performance of computerized physician order entry.

Science.gov (United States)

Metzger, Jane; Welebob, Emily; Bates, David W; Lipsitz, Stuart; Classen, David C

2010-04-01

Computerized physician order entry is a required feature for hospitals seeking to demonstrate meaningful use of electronic medical record systems and qualify for federal financial incentives. A national sample of sixty-two hospitals voluntarily used a simulation tool designed to assess how well safety decision support worked when applied to medication orders in computerized order entry. The simulation detected only 53 percent of the medication orders that would have resulted in fatalities and 10-82 percent of the test orders that would have caused serious adverse drug events. It is important to ascertain whether actual implementations of computerized physician order entry are achieving goals such as improved patient safety.

Design of safety mechanism for an industrial manipulator based on passive compliance

International Nuclear Information System (INIS)

Kim, Hwi Su; Park, Jung Jun; Song, Jae Bok; Kyung, Jin Ho

2010-01-01

In recent years, collision safety between humans and robots has drawn much attention since human-robot cooperation is increasingly needed in various fields. Since positioning accuracy and collision safety are both important, an industrial manipulator should maintain very high stiffness for positioning accuracy in a normal situation, but exhibit very low stiffness when subjected to a collision force greater than the tolerance for human injury. To satisfy these requirements, we proposed in our previous research a safety mechanism composed of a linear spring and a double-slider mechanism for a service robot with a small payload. We modified this device to meet more stringent requirements for an industrial manipulator which usually has a payload higher than a service robot. Several experiments on static and dynamic collisions showed high stiffness of the safety mechanism in response to an external torque that was less than a predetermined threshold torque, but low stiffness that enabled absorption of the collision force when the external torque exceeded the threshold. Thus, positioning accuracy and collision safety were improved using the proposed design. Furthermore, a new safety criterion is suggested to verify the collision safety of a manipulator that uses the proposed safety mechanism

MANAGEMENT PROCESS OF HEALTH AND SAFETY RISK IN THE NIGERIA CONSTRUCTION INDUSTRY

OpenAIRE

Akwu, Ifeoma Claris

2017-01-01

The study examined the state of health and safety risk management practices in the building sector of the construction industry with the objective to examine the health and safety risk management processes adopted by the construction industry in Nigeria; the study adopted the survey and case study research design. It employed the use of Delphi’s technique in the distribution of questionnaire and made use of chi-square analytical technique for the analysis of gathered data. The findings reveal...

Multi - party Game Analysis of Coal Industry and Industry Regulation Policy Optimization

Science.gov (United States)

Jiang, Tianqi

2018-01-01

In the face of the frequent occurrence of coal mine safety accidents, this paper analyses the relationship between central and local governments, coal mining enterprises and miners from the perspective of multi - group game. In the actual production, the decision of one of the three groups can affect the game strategy of the other of the three, so we should assume the corresponding game order. In this order, the game analysis of the income and decision of the three is carried out, and the game decision of the government, the enterprise and the workers is obtained through the establishment of the benefit matrix and so on. And then on the existing system to optimize the coal industry regulation proposed practical recommendations to reduce the frequency of industry safety accidents, optimize the industry production environment.

Implications of passive safety based on historical industrial experience

International Nuclear Information System (INIS)

Forsberg, C.W.

1988-01-01

In the past decade, there have been multiple proposals for applying different technologies to achieve passively safe light water reactors (LWRs). A key question for all such concepts is, ''What are the gains in safety, costs, and reliability for passive safety systems.'' Using several types of historical data, estimates have been made of gains from passive safety and operating systems, which are independent of technology. Proposals for passive safety in reactors usually have three characteristics: (1) Passive systems with no moving mechanical parts, (2) systems with far fewer components and (3) more stringent design criteria for safety-related and process systems. Each characteristic reduces the potential for an accident and may increase plant reliability. This paper addresses gains from items (1) and (2). Passive systems often allow adoption of more rigorous design criteria which would be either impossible or economically unfeasible for active systems. This important characteristic of passive safety systems cannot be easily addressed using historical industrial experience

A Nuclear Safety System based on Industrial Computer

International Nuclear Information System (INIS)

Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack

2011-01-01

The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

A Nuclear Safety System based on Industrial Computer

Energy Technology Data Exchange (ETDEWEB)

Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack [Korea Electric Power Corporation Engineering and Construction, Daejeon (Korea, Republic of)

2011-05-15

The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

Impact of individual resilience and safety climate on safety performance and psychological stress of construction workers: A case study of the Ontario construction industry.

Science.gov (United States)

Chen, Yuting; McCabe, Brenda; Hyatt, Douglas

2017-06-01

The construction industry has hit a plateau in terms of safety performance. Safety climate is regarded as a leading indicator of safety performance; however, relatively little safety climate research has been done in the Canadian construction industry. Safety climate may be geographically sensitive, thus it is necessary to examine how the construct of safety climate is defined and used to improve safety performance in different regions. On the other hand, more and more attention has been paid to job related stress in the construction industry. Previous research proposed that individual resilience may be associated with a better safety performance and may help employees manage stress. Unfortunately, few empirical research studies have examined this hypothesis. This paper aims to examine the role of safety climate and individual resilience in safety performance and job stress in the Canadian construction industry. The research was based on 837 surveys collected in Ontario between June 2015 and June 2016. Structural equation modeling (SEM) techniques were used to explore the impact of individual resilience and safety climate on physical safety outcomes and on psychological stress among construction workers. The results show that safety climate not only affected construction workers' safety performance but also indirectly affected their psychological stress. In addition, it was found that individual resilience had a direct negative impact on psychological stress but had no impact on physical safety outcomes. These findings highlight the roles of both organizational and individual factors in individual safety performance and in psychological well-being. Construction organizations need to not only monitor employees' safety performance, but also to assess their employees' psychological well-being. Promoting a positive safety climate together with developing training programs focusing on improving employees' psychological health - especially post-trauma psychological

The Impact of Occupational Safety on Logistics and Automation in Industrial Plants

OpenAIRE

Botti, Lucia

2017-01-01

Research on workplace health and safety analyses the integration of work practices with safety, health and wealth of people at work. The aim of occupational safety is to realize a safe and health work environment, eliminating or reducing the risks for workers' safety and health. The objective of this thesis is the study, integration, development and application of innovative approaches and models for decision-making support in the context of occupational safety in industrial plants and lo...

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism

Directory of Open Access Journals (Sweden)

Ran Gao

2016-11-01

Full Text Available The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA and the remaining data were submitted to structural equation modeling (SEM. Top management commitment (TMC and supervisors’ expectation (SE were identified as factors to represent organizational safety climate (OSC and supervisor safety climate (SSC, respectively, and coworkers’ caring and communication (CCC and coworkers’ role models (CRM were identified as factors to denote coworker safety climate (CSC. SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry.

Multilevel Safety Climate and Safety Performance in the Construction Industry: Development and Validation of a Top-Down Mechanism.

Science.gov (United States)

Gao, Ran; Chan, Albert P C; Utama, Wahyudi P; Zahoor, Hafiz

2016-11-08

The character of construction projects exposes front-line workers to dangers and accidents. Safety climate has been confirmed to be a predictor of safety performance in the construction industry. This study aims to explore the underlying mechanisms of the relationship between multilevel safety climate and safety performance. An integrated model was developed to study how particular safety climate factors of one level affect those of other levels, and then affect safety performance from the top down. A questionnaire survey was administered on six construction sites in Vietnam. A total of 1030 valid questionnaires were collected from this survey. Approximately half of the data were used to conduct exploratory factor analysis (EFA) and the remaining data were submitted to structural equation modeling (SEM). Top management commitment (TMC) and supervisors' expectation (SE) were identified as factors to represent organizational safety climate (OSC) and supervisor safety climate (SSC), respectively, and coworkers' caring and communication (CCC) and coworkers' role models (CRM) were identified as factors to denote coworker safety climate (CSC). SEM results show that OSC factor is positively related to SSC factor and CSC factors significantly. SSC factor could partially mediate the relationship between OSC factor and CSC factors, as well as the relationship between OSC factor and safety performance. CSC factors partially mediate the relationship between OSC factor and safety performance, and the relationship between SSC factor and safety performance. The findings imply that a positive safety culture should be established both at the organizational level and the group level. Efforts from all top management, supervisors, and coworkers should be provided to improve safety performance in the construction industry.

Safety Politics and Risk Perceptions in Malaysian Industry

DEFF Research Database (Denmark)

Wangel, Arne

Abstract The book deals with the analysis of work hazards and safety in industrial enterprises in Peninsular Malaysia, Southeast Asia. It traces the development of this theme of conflict within the context constituted by state, labour market and labour-management relations in Malaysia. The book...... and safety, when compared with the influence of local conditions? What kind of process develops, as local theory about work hazards are formed among workers. And, which are the opportunities for changing working environment institutions in Malaysia? The first part of the book discusses traditions...... by the state from Burawoy, Beronius, and Adesina about production politics and social relations in the labour process provides an integrated perspective on individual risk perceptions, safety practices in enterprises, and government regulation. The empirical data were collected during the period 1989...

Safety culture in the Finnish and Swedish nuclear industries - history and present

Energy Technology Data Exchange (ETDEWEB)

Reiman, T.; Pietikaeinen, E. (Technical Research Centre of Finland, VTT (Finland)); Kahlbom, U. (RiskPilot AB (Sweden)); Rollenhagen, C. (Royal Institute of Technology (KTH) (Sweden))

2010-03-15

The report presents results from an interview study that examined the characteristics of the Nordic nuclear branch safety culture. The study also tested the theoretical model of safety culture developed by the authors. The interview data was collected in Sweden (n = 14) and Finland (n = 16). Interviewees represented the major actors in the nuclear field (regulators, power companies, expert organizations, waste management organizations). The study gave insight into the nature of safety culture in the nuclear industry. It provided an overview on the variety of factors that people in the industry consider important for safety. The respondents rather coherently saw such psychological states as motivation, mindfulness, sense of control, understanding of hazards and safety and sense of responsibility as important for nuclear safety. Some of the respondents described a certain Nordic orientation towards safety. One characteristic was a sense of personal responsibility for safety. However, there was no clear agreement on the existence of a shared Nordic nuclear safety culture. Sweden and Finland were seen different for example in the way the co-operation between plants and nuclear safety authorities was arranged and re-search activities organized. There were also perceived differences in the way everyday activities like decision making were carried out in the organizations. There are multiple explanations for the differences. The industry in Sweden has been driven by the strong supplier. In Finland the regulator's role in shaping the culture has been more active. Other factors creating differences are e.g. national culture and company culture and the type of the power plant. Co-operation between Nordic nuclear power organizations was viewed valuable yet challenging from safety point of view. The report concludes that a good safety culture requires a deep and wide under-standing of nuclear safety including the various accident mechanisms of the power plants as well as

Safety culture in the Finnish and Swedish nuclear industries - history and present

International Nuclear Information System (INIS)

Reiman, T.; Pietikaeinen, E.; Kahlbom, U.; Rollenhagen, C.

2010-03-01

The report presents results from an interview study that examined the characteristics of the Nordic nuclear branch safety culture. The study also tested the theoretical model of safety culture developed by the authors. The interview data was collected in Sweden (n = 14) and Finland (n = 16). Interviewees represented the major actors in the nuclear field (regulators, power companies, expert organizations, waste management organizations). The study gave insight into the nature of safety culture in the nuclear industry. It provided an overview on the variety of factors that people in the industry consider important for safety. The respondents rather coherently saw such psychological states as motivation, mindfulness, sense of control, understanding of hazards and safety and sense of responsibility as important for nuclear safety. Some of the respondents described a certain Nordic orientation towards safety. One characteristic was a sense of personal responsibility for safety. However, there was no clear agreement on the existence of a shared Nordic nuclear safety culture. Sweden and Finland were seen different for example in the way the co-operation between plants and nuclear safety authorities was arranged and re-search activities organized. There were also perceived differences in the way everyday activities like decision making were carried out in the organizations. There are multiple explanations for the differences. The industry in Sweden has been driven by the strong supplier. In Finland the regulator's role in shaping the culture has been more active. Other factors creating differences are e.g. national culture and company culture and the type of the power plant. Co-operation between Nordic nuclear power organizations was viewed valuable yet challenging from safety point of view. The report concludes that a good safety culture requires a deep and wide under-standing of nuclear safety including the various accident mechanisms of the power plants as well as a

Industrial high pressure applications. Processes, equipment and safety

Energy Technology Data Exchange (ETDEWEB)

Eggers, Rudolf (ed.) [Technische Univ. Hamburg-Harburg, Hamburg (Germany). Inst. fuer Thermische Verfahrenstechnik

2012-07-01

Industrial high pressure processes open the door to many reactions that are not possible under 'normal' conditions. These are to be found in such different areas as polymerization, catalytic reactions, separations, oil and gas recovery, food processing, biocatalysis and more. The most famous high pressure process is the so-called Haber-Bosch process used for fertilizers and which was awarded a Nobel prize. Following an introduction on historical development, the current state, and future trends, this timely and comprehensive publication goes on to describe different industrial processes, including methanol and other catalytic syntheses, polymerization and renewable energy processes, before covering safety and equipment issues. With its excellent choice of industrial contributions, this handbook offers high quality information not found elsewhere, making it invaluable reading for a broad and interdisciplinary audience.

Nuclear Safety R and D Programs and trend in the U. S. Utility Industry

International Nuclear Information System (INIS)

Kim, Jong Hyun

1992-01-01

First of all, the deterministic approach to safety analysis, which had dominated safety research in the earlier years, has given much ground to probabilistic approach. Secondly, human factors analysis has become an important part of safety research. Third, safety research relevant to reliability, or safety combined with reliability, are gradually taking place of purely safety-oriented or stand-alone safety research. More and more nuclear utilities in the U. S. are integrating safety with reliability. This evolution is in part due to the successful completion of major safety testing and analyses of deterministic nature, and partially due to the utility industry's desire to harvest synergistic nature, and partially due to the utility industry's desire to harvest synergistic results by combining safety with reliability, as the utility industry is more and more concerned about reducing operation and maintenance costs by enhancing reliability while maintaining plant safety. Nuclear safety is a complex and comprehensive concept, defying a simple categorization or interpretation. Thus, research and development in nuclear safety is necessarily diverse, and the program areas and trend presented in this paper are not meant to be all inclusive. For instance, there are some other active areas that were not mentioned, such as seismic risk assessment program and others. Nuclear safety research and development activities have undergone a perceptible shift of emphasis in recent years. They have become more focused and product-oriented. Also, except for the severe accident analysis, the emphasis on prevention and mitigation of accident, rather than analyzing the consequences of accident, is very much in evidence; that is, reliability-based technologies using PIRA methodology, and upgrading of instrumentation and control technologies are in the main stream of activities

Probabilistic safety assessment in the chemical and nuclear industries

CERN Document Server

Fullwood, Ralph R

2000-01-01

Probabilistic Safety Analysis (PSA) determines the probability and consequences of accidents, hence, the risk. This subject concerns policy makers, regulators, designers, educators and engineers working to achieve maximum safety with operational efficiency. Risk is analyzed using methods for achieving reliability in the space program. The first major application was to the nuclear power industry, followed by applications to the chemical industry. It has also been applied to space, aviation, defense, ground, and water transportation. This book is unique in its treatment of chemical and nuclear risk. Problems are included at the end of many chapters, and answers are in the back of the book. Computer files are provided (via the internet), containing reliability data, a calculator that determines failure rate and uncertainty based on field experience, pipe break calculator, event tree calculator, FTAP and associated programs for fault tree analysis, and a units conversion code. It contains 540 references and many...

Work health and safety in cotton ginning industry: a survey of practices in australia

International Nuclear Information System (INIS)

Soomro, N.

2015-01-01

This survey focuses on the WH and S (Work Health and Safety) practices in Australia and relates them with those in Pakistan. It also highlights the planned areas of work required on WH and S in cotton ginning industry of Pakistan. This article is one a series of research studies that will inform a broader approach development. The aim of the survey was to design a standardized health and safety Act for cotton ginning industry of Pakistan and to help ginners meet their due industry obligations under the model WH and S Act. The first component of the research study survey was to review the relevant Australian work and safety model as this provides a framework to protect the health, safety and welfare of all employees at work and of other people who might be affected by the job. The second aspect of the research study survey concerned site visits to cotton gins with the support of Australian Centre for Agricultural Health and Safety, Moree, NSW. During these visits the existing ginning process in terms of WH and S were reviewed. Informal interviews were also conducted with Gin Managers and Ginning Experts regarding WH and S in the Australian cotton ginning industry. (author)

Implementation of the safety assessment in the practice of industrial radiography

International Nuclear Information System (INIS)

Alfonso Pallarés, C.; Pérez Reyes, Y.

2015-01-01

The CNSN as regulatory authority has regulatory control processes based on regulations, permits, inspections and limitation to ensure the supervision and control of the practice of industrial radiography. On the other hand in the light of the new regulations approved and being implemented such as: Resolution 334/2011 CITMA 'Regulation on Notification and authorization of practices and activities associated with the use of ionizing radiation sources' and Resolution 17 / 2012, Security Guide: Security Assessment Practices and Activities associated with the use of ionizing radiation (recommendatory), it is necessary for compliance with regulatory requirements concerning the safety assessment. Since 2009 it has been applied this experience in different medical practices and industry, providing a systematic and consistent basis, to the safety assessment of all facilities and activities, which has helped increase the confidence that has been achieved an adequate level of security. The work was able to identify that there is a group of barriers operating in the risk reduction in various accident sequences and therefore have a relative importance in risk reduction, recommendations in this regard to improve the program management of safety in the practice of industrial radiography. [es

Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

OpenAIRE

Mohd Ayob Norizawati; Masron Tarmiji

2014-01-01

The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destinatio...

A pattern of contractor selection for oil and gas industries in a safety approach using ANP-DEMATEL in a Grey environment.

Science.gov (United States)

Gharedaghi, Gholamreza; Omidvari, Manouchehr

2018-01-11

Contractor selection is one of the major concerns of industry managers such as those in the oil industry. The objective of this study was to determine a contractor selection pattern for oil and gas industries in a safety approach. Assessment of contractors based on specific criteria and ultimately selecting an eligible contractor preserves the organizational resources. Due to the safety risks involved in the oil industry, one of the major criteria of contractor selection considered by managers today is safety. The results indicated that the most important safety criterion of contractor selection was safety records and safety investments. This represented the industry's risks and the impact of safety training and investment on the performance of other sectors and the overall organization. The output of this model could be useful in the safety risk assessment process in the oil industry and other industries.

Validation of a pre-existing safety climate scale for the Turkish furniture manufacturing industry.

Science.gov (United States)

Akyuz, Kadri Cemil; Yildirim, Ibrahim; Gungor, Celal

2018-03-22

Understanding the safety climate level is essential to implement a proactive safety program. The objective of this study is to explore the possibility of having a safety climate scale for the Turkish furniture manufacturing industry since there has not been any scale available. The questionnaire recruited 783 subjects. Confirmatory factor analysis (CFA) tested a pre-existing safety scale's fit to the industry. The CFA indicated that the structures of the model present a non-satisfactory fit with the data (χ 2  = 2033.4, df = 314, p ≤ 0.001; root mean square error of approximation = 0.08, normed fit index = 0.65, Tucker-Lewis index = 0.65, comparative fit index = 0.69, parsimony goodness-of-fit index = 0.68). The results suggest that a new scale should be developed and validated to measure the safety climate level in the Turkish furniture manufacturing industry. Due to the hierarchical structure of organizations, future studies should consider a multilevel approach in their exploratory factor analyses while developing a new scale.

SAFETY PERFORMANCE OF SUBCONTRACTORS IN THE PALESTINIAN CONSTRUCTION INDUSTRY

Directory of Open Access Journals (Sweden)

Adnan Enshassi

2008-06-01

Full Text Available Subcontractors perform most of the construction works and their effect on industry are apparent in different activities of construction. Therefore, subcontractors need more attention from government and contractors union. The aim of this paper is to identify, evaluate, and rank factors that influence safety performance of subcontractors in the Gaza Strip (Palestine according to their relative importance. The study concluded that reported accident rates will decrease among subcontractors and their workers if new workers are trained well in the work site and they are informed about dangerous places, and if a workable safety plan is well preplanned. The results also showed that reported accident rates increased among subcontractors when using old, unsafe equipment and due to the complexity or difficulty in the construction sites features. Owners and general contractors need to stipulate strict clauses for safety in the contract for improving safety record of subcontractors. Construction workers must receive proper job related safety and health training with a safety logbook. It is recommended that the subcontractors and workers should attend continuing safety programs on regular basis as part of their perquisite to work in construction sites.

Occupational safety and health in the food and drink industries.

OpenAIRE

Tomoda S

1993-01-01

Chapter 5 examines "Safety and health issues in respect of women workers in the food and drink industries". The paper provides information on the impact of technological progress in the sector; identifies the general hazards encountered; describes the injuries and diseases suffered by workers and concentrates on the most common approaches adopted for their prevention; and concludes by emphasizing the importance of adopting a tripartite approach to the solution of safety and health problems.

Quality and safety in Spain; La calidad y seguridad industrial en Espana

Energy Technology Data Exchange (ETDEWEB)

Prieto Barrio, J. M.; Martinez Martin, D. J.

2015-07-01

For three decades, and after the entry of Spain into the EU, it has been developed a regulatory, stable but evolving, framework that has allowed to create the conditions and structures to have stringent safety conditions of products and manufacturing facilities, as well as all the activities necessary for their certification and control. This development has been possible, among others, by the work of impulse and coordination of the Ministry of industry, Energy and Tourism, and particularly of the quality and Industrial safety sub directorate. On the other hand it has been developed a quality infrastructure that has, at the State level, with a standardisation (AENOR) entity and an accreditation body (ENAC) with recognized prestige around the world. In this article, in the first part, a list the regulations which apply to products and manufacturing facilities is shown, as well as explain the role played by standards and accreditation system in industrial safety and the factor of competitiveness that this entails for our industrial sector, and, in the second part, the institutional role of the Ministry and, the aforementioned Sub directorate, is described. The aim of the article is to be a descriptive reference of the current regulatory framework as well as the role of the State in this process. (Author)

Investigating ethnic minorities' perceptions of safety climate in the construction industry.

Science.gov (United States)

Chan, Albert P C; Wong, Francis K W; Hon, Carol K H; Lyu, Sainan; Javed, Arshad Ali

2017-12-01

An increasing number of ethnic minorities (EMs) have been employed in the construction industry to alleviate severe labor shortages in many countries. Unfortunately, statistics show that EMs have higher fatal and non-fatal occupational injury rates than their local counterparts. However, EMs are often underrepresented in safety climate (SC) research as they are difficult to reach and gauge their perception. A positive relationship has been widely found between SC and safety performance. Understanding the safety perceptions of EMs helps to reduce injuries and improve their safety performance. Based on a sample of 320 EMs from 20 companies in the construction industry, exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) were used to identify the SC factors of EMs, and validate the extracted factors, respectively. Multivariate analysis of variance was undertaken to examine mean differences in perceptions of SC by personal characteristics. Three SC factors for EMs encapsulating 16 variables were identified through EFA. The hypothesized CFA model for a three-factor structure derived from EFA showed a satisfactory goodness-of-fit, composite reliability, and construct validity. Three SC factors were identified, namely: (a) safety management commitment, safety resources, and safety communication; (b) employee's involvement and workmate's influence; and (c) perception of safety rules, procedures and risks. The perceptions of SC differed significantly by nationality, marital status, the number of family members supported, and drinking habit. This study reveals the perception of EMs toward SC. The findings highlight the areas for safety improvement and provide leading indicators for safety performance of EMs. The findings are also enlightening for countries with a number of EMs, such as the United Sates, the United Kingdom, Australia, Singapore, and the Middle East. Copyright © 2017. Published by Elsevier Ltd.

Computer-aided safety systems of industrial high energy objects

International Nuclear Information System (INIS)

Topolsky, N.G.; Gordeev, S.G.

1995-01-01

Modern objects of fuel and energy, chemical industries are characterized by high power consumption; by presence of large quantities of combustible and explosive substances used in technological processes; by advanced communications of submission systems of initial liquid and gasiform reagents, lubricants and coolants, the products of processing, and wastes of production; by advanced ventilation and pneumatic transport; and by complex control systems of energy, material and information flows. Such objects have advanced infrastructures, including a significant quantity of engineering buildings intended for storage, transportation, and processing of combustible liquids, gasiform fuels and materials, and firm materials. Examples of similar objects are nuclear and thermal power stations, chemical plants, machine-building factories, iron and steel industry enterprises, etc. Many tasks and functions characterizing the problem of fire safety of these objects can be accomplished only upon the development of special Computer-Aided Fire Safety Systems (CAFSS). The CAFSS for these objects are intended to reduce the hazard of disastrous accidents both causing fires and caused by them. The tasks of fire prevention and rescue work of large-scale industrial objects are analyzed within the bounds of the recommended conception. A functional structure of CAFSS with a list of the main subsystems forming a part of its composition has been proposed

Days on safety of industrial radiographic controls

International Nuclear Information System (INIS)

2008-01-01

This program is divided in three parts: the context and the regulations, the preparation and the implementation, the tools of prevention and the initiatives and the perspectives.In the first part devoted to the context and regulation are: the context by the Authority of nuclear safety (A.S.N.), the regulation referential, the transport of gamma-graphs; in the second part are the distribution of liabilities, materials and associated requirements, the feedback of incidents and exploitation of it, training and base requirements, works of S.F.R.P./C.O.F.R.E.N.D. and the A.S.N. position; the third part includes help to evaluation of risks at working places of industry radiologists, dosimetry study of a working place, guide to evaluate oneself; the fourth part devoted to the initiatives and the perspectives are: regional experiences charters of good practices in industry radiography, integration of works and deployment by the members of the C.O.F.R.E.N.D., perspectives in matter of prevention of occupational risks in the area of industry radiography. (N.C.)

Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

Directory of Open Access Journals (Sweden)

Mohd Ayob Norizawati

2014-01-01

Full Text Available The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destination was tarnished a few years lately and new unfortunates incident in this year bring more damage to Malaysia image. Healthy issues, terrorism, Lahad Datu intrusion, repeated kidnapping and shooting in Sabah, twin airlines incident, riot and illegal demonstration and false reporting by international media brings new challenging to Malaysia. Although some incident may be had short-term impact to Malaysia tourism industry, but it’s still gave the big impact to Malaysia branding process. Many travellers and Malaysian itself still believe that Malaysia is a one of safer destination and country to visit and stayed in, but more outstanding efforts was require to make sure Malaysia tourism industry was capable to recover from this negative impact as soon as possible.

Procurement in the Nuclear Industry, Quality, Safety and Decision Making

International Nuclear Information System (INIS)

Jakobsson, Marianne; Svenson, Ola; Salo, Ilkka

2010-03-01

The major purpose of the present study is partly to map and partly to make an analysis of the decision processes in the procurement routines in the nuclear industry in order to provide a basis for: 1. further development of safety inspections about procurements for Swedish Radiation Safety Authority 2. improvements of safety management in connection with procurement within a nuclear-power plant, 3 improvements of procurement routines in general in a nuclear power plant. The procurement processes at a nuclear power plant were analyzed from a decision theoretic perspective. Key staff at the plant was interviewed and written instructions as well as digitalized processes were used in the analysis. The results illustrate the most important moments during the procurement process with descriptions from interviews and documents. The staff at the nuclear power plant used a multi-attribute utility decision theory MAUT-inspired model in evaluation of alternatives and both compensatory (in which negative aspects can be compensated by positive aspects) and non-compensatory (in which certain 'pass' levels of attributes have to be exceeded for a choice) decision rules were used in the procurement process. Not surprising, nuclear safety was evaluated in a non-compensatory manner following regulatory criteria while costs were evaluated in trade-off compensatory rules, which means that a weakness in one consideration might be compensated by strength in another consideration. Thus, nuclear safety above the regulator's and law requirements are not integrated in a compensatory manner when procurement alternatives are evaluated. The nuclear plant assessed an organization's safety culture at an early stage of the purchasing process. A successful and a less successful procurement case were reported with the lessons learned from them. We find that the existing written instructions for purchase were well elaborated and adequate. There is a lack of personal resources when procurement teams

Development of the safety evaluation system in the respects of organizational factors and workers' consciousness. Pt. 5. Application of the system for industries except electric power industry

International Nuclear Information System (INIS)

Hasegawa, Naoko; Hirose, Ayako; Hayase, Kenichi; Sasou Kunihide; Takano, Kenichi

2004-01-01

The purpose of our study is to develop a safety evaluation system which clarifies the safety level of an organization. As a basic method of evaluation using a questionnaire had been established, now that the generalization is needed for the system. Hence, this paper is intended to verify the applicability of the system for eight manufacture industries. The investigation using a questionnaire was conducted for 125 factories' workers. The following results were obtained: 1) The Comprehensive Safety Index (CSI) taking into account individual and organizational factors was identified using the principal component analysis. 2) Although the criterion-related validity of CSI was confirmed for some industries, ti will be necessary for the advancement of the system's reliability to compile more data into the system. 3) According to the result of investigations on safety management in secure companies and the causes of current industrial accidents, it was clarified that the CSI had the content validity. 4) It seemed possible to evaluate the safety level using two different industries' data if there were similarities between the industries in the score of the CSI and the aspects to which were attached importance for the improvement of the safety. (author)

Establish Central Kitchen under HACCP Control in Food and Beverage Industry to Ensure Food Safety and Hygiene

Directory of Open Access Journals (Sweden)

Cuihua Qi

2014-04-01

Full Text Available In recent years, food safety and hygiene have been a social problem. So, it is worth studying in-depth that how to control the safety and hygiene of food and beverage. This paper proposes to establish central kitchens under HACCP control to ensure food safety and hygiene in the food and beverage industry. Considering the practical difficulties in the application of HACCP, this paper introduces the establishment of dishes HACCP system with some examples to give the reference of the food and beverage industry. Central kitchens have many advantages while HACCP is the golden standard to ensure food safety and hygiene, hence, it will ensure food safety and hygiene if both can be combined with in the use of food and beverage industry.

Construction Safety And Health Factors At The Industry Level: The Case Of Singapore

Directory of Open Access Journals (Sweden)

Charles Y.J. Cheah

2007-12-01

Full Text Available The construction industry is one of the most hazardous industries due to the unique nature of its products and the processes involved. Recent occurrences of highly publicized construction site accidents in Singapore have highlighted the immediate needs for the local industry to address safety and attention at the industry level. The objective of this paper is to examine issues and critical factors affecting S&H standards in Singapore. Clearly, collective efforts should be pursued at the industry level as the country moves towards the ultimate safety management strategy of self-regulation. The findings also indicate that the challenge of making worksites safe should not be placed solely on the contractors but should be shared by all parties affecting the value chain of construction, including the developers, the consultants and the government. The factors identified through factor analysis may inform legislators and industry practitioners in terms of the sources of problems and help develop effective strategies for improvement. Some of the experiences mentioned in the paper could also be relevant to other countries facing similar circumstances.

Safety- and Risk Analysis Activities in Chemical Industry in Europe

International Nuclear Information System (INIS)

Kozine, Igor; Duijm, Nijs Jan; Lauridsen Kurt

2001-01-01

The current paper gives an overview of the legislation and the methods used in safety and risk management in the chemical industry within Europe and in particular within the European Union. The paper is based on a report that has been written for the SOS-1 project under the Nordic nuclear safety research (NKS). Safety- and risk-related matters in the process industry, in particular, in chemical, within the EU are subject to consideration at three levels: (1) EU legislation, (2) European/intemational standardisation, and (3) socio-economic analysis. EC Directives define the 'essential requirements', e.g., protection of health and safety, that must be fulfilled when goods are placed on the market or some industry is put into operation. The European standards bodies (CEN, CENELEC and ETSI) have the task of establishing the corresponding technical specifications, meeting the essential requirements of the Directives, compliance with which will provide a presumption of conformity with the essential requirements. Such specifications are referred to as 'harmonised standards'. Compliance with harmonised standards remains voluntary, and manufacturers are free to choose any other technical solution that provides compliance with the essential requirements. This view is stated in the 'New Approach' to technical harmonisation and standardisation (details can be found on the web page: http://europe.eu.int/comm/enterprise/newapproach/standardization/index .html). Standardisation as well as the regulation of technical risks is increasingly being undertaken at European or international level. The European legislator limits its role to the affirmation of overall objectives, and leaves it to the economic players to draw up the technical procedures and standards to specify in detail the ways and means of attaining them. Many countries have introduced requirements that new legislation and/or administrative regulations be subject to socio-economic analysis. In this respect there is a

Safety- and Risk Analysis Activities in Chemical Industry in Europe

Energy Technology Data Exchange (ETDEWEB)

Kozine, Igor; Duijm, Nijs Jan; Lauridsen Kurt [Risoe National Laboratory, Roskilde (Denmark). Systems Analysis Department

2001-07-01

The current paper gives an overview of the legislation and the methods used in safety and risk management in the chemical industry within Europe and in particular within the European Union. The paper is based on a report that has been written for the SOS-1 project under the Nordic nuclear safety research (NKS). Safety- and risk-related matters in the process industry, in particular, in chemical, within the EU are subject to consideration at three levels: (1) EU legislation, (2) European/intemational standardisation, and (3) socio-economic analysis. EC Directives define the 'essential requirements', e.g., protection of health and safety, that must be fulfilled when goods are placed on the market or some industry is put into operation. The European standards bodies (CEN, CENELEC and ETSI) have the task of establishing the corresponding technical specifications, meeting the essential requirements of the Directives, compliance with which will provide a presumption of conformity with the essential requirements. Such specifications are referred to as 'harmonised standards'. Compliance with harmonised standards remains voluntary, and manufacturers are free to choose any other technical solution that provides compliance with the essential requirements. This view is stated in the 'New Approach' to technical harmonisation and standardisation (details can be found on the web page: http://europe.eu.int/comm/enterprise/newapproach/standardization/index .html). Standardisation as well as the regulation of technical risks is increasingly being undertaken at European or international level. The European legislator limits its role to the affirmation of overall objectives, and leaves it to the economic players to draw up the technical procedures and standards to specify in detail the ways and means of attaining them. Many countries have introduced requirements that new legislation and/or administrative regulations be subject to socio-economic analysis

Health and safety measures available for young labourers in the cottage industries of Karachi.

Science.gov (United States)

Baig, Lubna A; Rasheed, Shahida; Zameer, Mehvash; Zameer, Mehwash

2005-01-01

To determine the health problems faced by labourers, 18 years and under, working in the cottage industries of Karachi and know the safety measures available and utilized at these places. Cross-sectional study using two-stage cluster sampling. From February 2002 to March 2003, 95 cottage industries from 10 different locations of five districts of Karachi were included. All workers, 18 years and below, present were interviewed. The environmental and safety gadgets present at the industry were inspected by the surveyors and the manager was interviewed for presence of health and safety benefits for the workers. A total of 280 workers were interviewed, 26 (9.3%) children were between 9-12 years, 82 (29.3%) were between 13-15 and 172 (61.4%) were between 16-18 years of age. Health benefit was given to only one 13-year-old worker in silk industry; appropriate gadgets were absent in 93 (97.8%) industries, present only in 2 industries (one silk and one loom). First Aid box was present in only one loom industry. Two hundred and forty workers (85.7%) were unaware of the materials they were using. One hundred and ninety-three (69%) children were working in improper light, 199(71%) workers experienced high level of noise, 232(83%) were working in high temperature and 155(55.3%) were working with improper ventilation. Health problems faced included joint pains (n=64, 22.85%), backache (n=85, 30.35%), vertigo (n=48, 17.14%), numbness of fingers (n=77, 27.5%) and fatigue experienced by 143 (51.07%) children. The children and adolescents employed in cottage industry are suffering from health problems due to lack of knowledge on their part, and improper ergonomics, environmental and safety conditions at the workplace. The cottage industry should be regulated and brought under labour law. The health sector non-governmental organizations should make concerted efforts for the rehabilitation of this workforce by creating awareness and providing opportunities for education and

Manual on oil-gas industry waste utilization radioecological safety

International Nuclear Information System (INIS)

Kudryashev, V.A.; Lukashenko, S.N.; Tuleushev, A.Zh.; Marabaev, Zh.N.; Pasysaev, V.A.; Kayukov, P.G.; Kozhakhmetov, N.B.; Shevtsov, S.P.

2003-01-01

The development of a new document - 'Manual on radio-ecologically safe utilization of waste from oil-and-gas production' is carried out. This document regulates the whole cycle of environment protection measures at waste utilization for the named industry in Kazakhstan and is aimed on lowering the radiation risks and assurance of radioecological safety both at present and for the future. The document presents a set regulations necessary for radioactive wastes handling in the oil-gas industry. The normative document was agreed in both the Ministry of Health of the Republic of Kazakhstan (RK) and Ministry of Environment Protection of RK

Scale development of safety management system evaluation for the airline industry.

Science.gov (United States)

Chen, Ching-Fu; Chen, Shu-Chuan

2012-07-01

The airline industry relies on the implementation of Safety Management System (SMS) to integrate safety policies and augment safety performance at both organizational and individual levels. Although there are various degrees of SMS implementation in practice, a comprehensive scale measuring the essential dimensions of SMS is still lacking. This paper thus aims to develop an SMS measurement scale from the perspective of aviation experts and airline managers to evaluate the performance of company's safety management system, by adopting Schwab's (1980) three-stage scale development procedure. The results reveal a five-factor structure consisting of 23 items. The five factors include documentation and commands, safety promotion and training, executive management commitment, emergency preparedness and response plan and safety management policy. The implications of this SMS evaluation scale for practitioners and future research are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

Teamwork and Safety in the Maritime Industry: A SWOT Approach

OpenAIRE

Vestad, Anne-Lise

2010-01-01

Abstract The past few decades the use of teams has increased, also in complex sociotechnical systems such as the maritime industry. Safety issues involve a wide range of elements, including human factors, and pose a number of challenges to organisations in the shipping industry. The primary aim of this study was to examine the Big Five of teamwork model and its ability to capture teamwork aspects of all kinds of teams, independent of team type, organisational level and domain. The collect...

A model of Occupational Safety and Health Management System (OSHMS) for promoting and controlling health and safety in textile industry.

Science.gov (United States)

Manimaran, S; Rajalakshmi, R; Bhagyalakshmi, K

2015-01-01

The development of Occupational Safety and Health Management System in textile industry will rejuvenate the workers and energize the economy as a whole. In India, especially in Tamil Nadu, approximately 1371 textile business is running with the help of 38,461 workers under Ginning, Spinning, Weaving, Garment and Dyeing sectors. Textile industry of contributes to the growth of Indian economy but it fails to foster education and health as key components of human development and help new democracies. The present work attempts to measure and develop OSHMS which reduce the hazards and risk involved in textile industry. Among all other industries textile industry is affected by enormous hazards and risk because of negligence by management and Government. It is evident that managements are not abiding by law when an accident has occurred. Managements are easily deceiving workers and least bothered about the Quality of Work Life (QWL). A detailed analysis of factors promoting safety and health to the workers has been done by performing confirmatory factor analysis, evaluating Risk Priority Number and the framework of OHMS has been conceptualized using Structural Equation Model. The data have been collected using questionnaire and interview method. The study finds occupation health for worker in Textile industry is affected not only by safety measure but also by technology and management. The work shows that difficulty in identifying the cause and effect of hazards, the influence of management in controlling and promoting OSHMS under various dimensions. One startling fact is existence of very low and insignificance correlation between health factors and outcome.

Links between operating experience feedback of industrial accidents and nuclear safety

International Nuclear Information System (INIS)

Eury, S.P.

2012-01-01

Since 1992, the bureau for analysis of industrial risks and pollutions (BARPI) collects, analyzes and publishes information on industrial accidents. The ARIA database lists over 40.000 accidents or incidents, most of which occurred in French classified facilities (ICPE). Events occurring in nuclear facilities are rarely reported in ARIA because they are reported in other databases. This paper describes the process of selection, characterization and review of these accidents, as well as the following consultation with industry trade groups. It is essential to publicize widely the lessons learned from analyzing industrial accidents. To this end, a web site (www.aria.developpement-durable.gouv.fr) gives free access to the accidents summaries, detailed sheets, studies, etc. to professionals and the general public. In addition, the accidents descriptions and characteristics serve as inputs to new regulation projects or risk analyses. Finally, the question of the links between operating experience feedback of industrial accidents and nuclear safety is explored: if the rigorous and well-documented methods of experience feedback in the nuclear field certainly set an example for other activities, nuclear safety can also benefit from inputs coming from the vast diversity of accidents arisen into industrial facilities because of common grounds. Among these common grounds we can find: -) the fuel cycle facilities use many chemicals and chemical processes that are also used by chemical industries; -) the problems resulting from the ageing of equipment affect both heavy and nuclear industries; -) the risk of hydrogen explosion; -) the risk of ammonia, ammonia is a gas used by nuclear power plants as an ingredient in the onsite production of mono-chloramine and ammonia is involved in numerous accidents in the industry: at least 900 entries can be found in the ARIA database. The paper is followed by the slides of the presentation

Probabilistic analysis of safety in industrial irradiation plants

International Nuclear Information System (INIS)

Alderete, F.; Elechosa, C.

2006-01-01

The Argentinean Nuclear Regulatory Authority is carrying out the Probabilistic Safety Analysis (PSA) of the two industrial irradiation plants existent in the country. The objective of this presentation is to show from the regulatory point of view, the advantages of applying this tool, as well as the appeared difficulties; for it will be made a brief description of the facilities, of the method and of the normative one. Both plants are multipurpose facilities classified as 'industrial irradiator category IV' (panoramic irradiator with source deposited in pool). Basically, the execution of an APS consists of the following stages: 1. Identification of initiating events. 2. Modeling of Accidental Sequences (Event Trees). 3. Analysis of Systems (Fault trees). 4. Quantification of Accidental Sequences. The argentine normative doesn't demand to these facilities the realization of an APS, however the basic standard of Radiological Safety establishes that in the design of this type of facilities in the cases that is justified, should make sure that the annual probability of occurrence of an accidental sequence and the resulting dose in a person gives as result an radiological risk inferior to the risk limit adopted as acceptance criteria. On the other hand the design standard specifies for these irradiators it demands a maximum fault rate of 10 -2 for the related components with the systems of radiological safety. In our case, the possible initiating events have been identified that carried out to not wanted situations (about people exposure, radioactive contamination). Then, for each one of the significant initiating events, the corresponding accidental sequences were modeled and the safety systems that intervene in this sequences by means of fault trees were analyzed, for then to determine the fault probabilities of the same ones. At the moment they are completing these fault trees, but the difficulty resides in the impossibility of obtaining real data of the reliability

Safety Culture Development : The Gap Between Industry Guidelines and Literature, and the Differences Amongst Industry Sectors.

NARCIS (Netherlands)

Karanikas, Nektarios; Soltani, Pedram; de Boer, Robert J.; Roelen, Alfred L.C.; Arezes, Pedro

2016-01-01

Reason’s typology of safety culture (i.e. Just, Informative, Learning, Flexible and Reporting cultures) is widely used in the industry and academia. Through literature review we developed a framework including 36 markers that reflect the operationalization of Reason’s sub-cultures and general

Proposing a model for safety risk assessment in the construction industry using gray multi-criterion decision-making

Directory of Open Access Journals (Sweden)

S. M. Abootorabi

2014-09-01

Full Text Available Introduction: Statistical Report of the Social Security Organization indicate that among the various industries, the construction industry has the highest number of work-related accidents so that in addition to frequency, it has high intensity, as well. On the other hand, a large number of human resources are working in this whish shows they necessity for paying special attention to these workers. Therefore, risk assessment of the safety in the construction industry is an effective step in this regard. In this study, a method for ranking safety risks in conditions of low number of samples and uncertainty is presented, using gray multi-criterion decision-making. .Material and Method: In this study, we first identified the factors affecting the occurrence of hazards in the construction industry. Then, appropriate for ranking the risks were determined and the problem was defined as a multi-criterion decision-making. In order to weight the criteria and to evaluate alternatives based on each criterion, gray numbers were used. In the last stage, the problem was solved using the gray possibility degree. .Results: The results show that the method of gray multi-criterion decision-making is an effective method for ranking risks in situations of low samples compared with other methods of MCDM. .Conclusion: The proposed method is preferred to fuzzy methods and statistics in uncertain and low sample size, due to simple calculations and no need to define the membership function.

75 FR 5157 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving...

Science.gov (United States)

2010-02-01

...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving Proposed Rule Change... Consolidated FINRA Rulebook January 25, 2010. On December 2, 2009, the Financial Industry Regulatory Authority... later in the rulebook consolidation process. It is therefore ordered, pursuant to Section 19(b)(2) of...

Cooperative conflict and contested space: a case study of risk and safety in the steel industry.

OpenAIRE

2008-01-01

This dissertation is a journey into the world of risk and safety in the steel industry. The problem statement that is explored in this study relates to the nature of the relationship between safety performance and stakeholders in the steel industry, the nature of the relationships between different stakeholders and the way in which these relationships impact on risk management strategies. The author contends that safety is not a normative or procedural system within the workplace, but rather ...

Safety in relation to risk and benefit

International Nuclear Information System (INIS)

Siddall, E.

1985-01-01

The proper definition and quantification of human safety is discussed and from this basis the historical development of our present very high standard of safety is traced. It is shown that increased safety is closely associated with increased wealth, and the quantitative relationship between then is derived from different sources of evidence. When this factor is applied to the production of wealth by industry, a safety benefit is indicated which exceeds the asserted risks by orders of magnitude. It is concluded that present policies and attitudes in respect to the safety of industry may be diametrically wrong. (orig.) [de

Managing change in the nuclear industry: The effects on safety. INSAG-18. A report by the International Nuclear Safety Advisory Group

International Nuclear Information System (INIS)

2003-01-01

The nuclear industry is going through a period of unprecedented change. The changes arise from the political and business environment in which the industry must operate, and from within the industry itself as it strives to become more competitive. These pressures have already led to significant changes in how nuclear enterprises are organized. The changes can be expected to continue. It is absolutely essential that throughout the period of time that organizational changes are taking place, and after the changes have occurred, very high standards of safety are maintained by all the elements that make up the industry. Changes can be made effectively and safely, and gains in efficiency and competitiveness, as well as safety, can be realized if changes are introduced carefully and managed well. Experience has shown that this is not a simple matter to achieve. Nuclear installations are complex, and it is inherently demanding to foresee all the implications that a change may have on safety. However, experience has shown very clearly that many changes have a strong potential to affect both the safety that has been built into a design and in the safety culture of an organization. Hence failure to manage change well can significantly affect the likelihood of an accident, the degree to which the assets of the company are put at risk and the company's reputation. This INSAG report is directed at members of boards of directors and senior executives who are responsible for the overall safety of an installation, who make decisions for change and who implement these decisions. It is also written for senior regulators who, on behalf of the public, ensure that boards of directors and executives meet their responsibilities for safety. This report discusses how and why change can challenge the maintenance of a high level of safety, and what can be done to control that challenge and hence reap all the benefits of change. It draws an analogy between the well established principles for

Human factor in the problem of Russian nuclear industry safety

International Nuclear Information System (INIS)

Abramova, V.

2002-01-01

The approach to human factor definition, considered in the paper, consists of recognition of as many as possible factors for developing a complete list of factors, which have influence on mistakes or successful work of NPP personnel. Safety culture is considered as the main factor. The enhancement in nuclear power industry includes an optimization of organizational structures and development of personnel safety attitudes. The organizational factors, as possible root causes for human errors, need to be identified, assessed and improved. The organizational activities taken in Russia are presented

77 FR 36606 - Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public Meeting

Science.gov (United States)

2012-06-19

...: Threat Prevention --Working Group 2: Leak Detection/Mitigation & Storage --Working Group 3: Anomaly... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID PHMSA-2012-0146] Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public...

Assessment of Native Languages for Food Safety Training Programs for Meat Industry Employees

Science.gov (United States)

Olsen, Sherrlyn S.; Cordray, Joseph C.; Sapp, Stephen; Sebranek, Joseph G.; Anderson, Barbara; Wenger, Matt

2012-01-01

Challenges arise when teaching food safety to culturally diverse employees working in meatpacking and food manufacturing industries. A food safety training program was developed in English, translated into Spanish, and administered to 1,265 adult learners. Assessments were conducted by comparing scores before and immediately following training.…

Towards an Industrial Application of Statistical Uncertainty Analysis Methods to Multi-physical Modelling and Safety Analyses

International Nuclear Information System (INIS)

Zhang, Jinzhao; Segurado, Jacobo; Schneidesch, Christophe

2013-01-01

Since 1980's, Tractebel Engineering (TE) has being developed and applied a multi-physical modelling and safety analyses capability, based on a code package consisting of the best estimate 3D neutronic (PANTHER), system thermal hydraulic (RELAP5), core sub-channel thermal hydraulic (COBRA-3C), and fuel thermal mechanic (FRAPCON/FRAPTRAN) codes. A series of methodologies have been developed to perform and to license the reactor safety analysis and core reload design, based on the deterministic bounding approach. Following the recent trends in research and development as well as in industrial applications, TE has been working since 2010 towards the application of the statistical sensitivity and uncertainty analysis methods to the multi-physical modelling and licensing safety analyses. In this paper, the TE multi-physical modelling and safety analyses capability is first described, followed by the proposed TE best estimate plus statistical uncertainty analysis method (BESUAM). The chosen statistical sensitivity and uncertainty analysis methods (non-parametric order statistic method or bootstrap) and tool (DAKOTA) are then presented, followed by some preliminary results of their applications to FRAPCON/FRAPTRAN simulation of OECD RIA fuel rod codes benchmark and RELAP5/MOD3.3 simulation of THTF tests. (authors)

Misapplication of the IAEA 1996 basic safety standards to the minerals industry. Impact on the NORM and TENORM issues

Energy Technology Data Exchange (ETDEWEB)

Koperski, J. [Iluka Resources Limited, Capel (Australia)

2000-05-01

Mining and processing of minerals results in increased concentrations of the naturally occurring radioactive materials (NORM) in products and/or process wastes, relative to the source materials. The technologically enhanced naturally occurring radioactive material (TENORM) phenomenon may bring minerals industry operations into the ream of regulatory concern worldwide. The IAEA 1996 International Basic Safety Standards (BSS) have become the de facto blueprint for a number of national radiation safety regulations. But verbatim adoption of the BSS would clearly result in the great majority of minerals industry operations becoming, for the first time ever, subject to the provisions of radiation protection legislation. Consequently, notification, registration, licensing, occupational and environmental monitoring, statutory reporting, appointment of radiation safety staff etc. would be required. This would not only constitute a major culture shock' but would result in ongoing logistics and economic burden to the affected operations. In some cases it could spell their end. The commensurate demand on regulatory authorities would also emerge. The exemption criteria from the requirements of the BSS are very restrictive. They are not suitable for mining and processing of NORM/TENORM bearing minerals. The criteria have been expressed in terms of numerical exemption levels for hundreds of radionuclides, including all those that occur naturally. The levels specify both, the maximum exempted Activity Concentration and the maximum exempted total Activity of each radionuclide in the host material. Even if an operation could comply with the Activity Concentration criterion, due to the sheer mass of the minerals a non-compliance with the total Activity would always occur. The maximum exempted mass is of the order of single kilograms for wastes from petroleum and gas production, tin smelting and bauxite ore processing; for phosphate rock, fertilisers and most mineral sands

Misapplication of the IAEA 1996 basic safety standards to the minerals industry. Impact on the NORM and TENORM issues

International Nuclear Information System (INIS)

Koperski, J.

2000-01-01

Mining and processing of minerals results in increased concentrations of the naturally occurring radioactive materials (NORM) in products and/or process wastes, relative to the source materials. The technologically enhanced naturally occurring radioactive material (TENORM) phenomenon may bring minerals industry operations into the ream of regulatory concern worldwide. The IAEA 1996 International Basic Safety Standards (BSS) have become the de facto blueprint for a number of national radiation safety regulations. But verbatim adoption of the BSS would clearly result in the great majority of minerals industry operations becoming, for the first time ever, subject to the provisions of radiation protection legislation. Consequently, notification, registration, licensing, occupational and environmental monitoring, statutory reporting, appointment of radiation safety staff etc. would be required. This would not only constitute a major culture shock' but would result in ongoing logistics and economic burden to the affected operations. In some cases it could spell their end. The commensurate demand on regulatory authorities would also emerge. The exemption criteria from the requirements of the BSS are very restrictive. They are not suitable for mining and processing of NORM/TENORM bearing minerals. The criteria have been expressed in terms of numerical exemption levels for hundreds of radionuclides, including all those that occur naturally. The levels specify both, the maximum exempted Activity Concentration and the maximum exempted total Activity of each radionuclide in the host material. Even if an operation could comply with the Activity Concentration criterion, due to the sheer mass of the minerals a non-compliance with the total Activity would always occur. The maximum exempted mass is of the order of single kilograms for wastes from petroleum and gas production, tin smelting and bauxite ore processing; for phosphate rock, fertilisers and most mineral sands products

The Development of a Risk Management System in the Field of Industrial Safety in the Republic of Kazakhstan

Directory of Open Access Journals (Sweden)

Sergey S. Kudryavtsev

2018-03-01

Full Text Available Background: The purpose of the work is to develop a system that allows processing of information for analysis and industrial risk management, to monitor the level of industrial safety and to perform necessary measures aimed at the prevention of accidents, casualties, and development of professional diseases for effective management of industrial safety at hazardous industrial sites. Methods: Risk assessment of accidents and incidents is based on expert evaluations. Based on the lists of criteria parameters and their possible values, provided by the experts, a unified information and analytical database is compiled, which is included in the final interrogation questionnaires. Risk assessment of industrial injuries and occupational diseases is based on statistical methods. Results: The result of the research is the creation of Guidelines for risk management on hazardous industrial sites of the Republic of Kazakhstan. The Guidelines determine the directions and methods of complex assessment of the state of industrial safety and labor protection and they could be applied as methodological basis at the development of preventive measures for emergencies, casualties, and incidents at hazardous industrial sites. Conclusion: Implementation of the information-analytical system of risk level assessment allows to analyze the state of risk of a possible accident at industrial sites, make valid management decisions aimed at the prevention of emergencies, and monitor the effectiveness of accident prevention measures. Keywords: industrial safety, industrial trauma, professional sickness rate, risk assessment, risk management

Industrial Safety and Applied Health Physics Division, annual report for 1982

International Nuclear Information System (INIS)

1983-12-01

Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee

Industrial Safety and Applied Health Physics Division, annual report for 1982

Energy Technology Data Exchange (ETDEWEB)

1983-12-01

Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee. (ACR)

The Development of a Risk Management System in the Field of Industrial Safety in the Republic of Kazakhstan

OpenAIRE

Sergey S. Kudryavtsev; Pavel V. Yemelin; Natalya K. Yemelina

2018-01-01

Background: The purpose of the work is to develop a system that allows processing of information for analysis and industrial risk management, to monitor the level of industrial safety and to perform necessary measures aimed at the prevention of accidents, casualties, and development of professional diseases for effective management of industrial safety at hazardous industrial sites. Methods: Risk assessment of accidents and incidents is based on expert evaluations. Based on the lists of crite...

OECD/NEA WGFCS Workshop: Safety Assessment of Fuel Cycle Facilities - Regulatory Approaches and Industry Perspectives

International Nuclear Information System (INIS)

2013-01-01

Nuclear fuel is produced, processed, and stored mainly in industrial-scale facilities. Uranium ores are processed and refined to produce a pure uranium salt stream, Uranium is converted and enriched, nuclear fuel is fabricated (U fuel and U/Pu fuel for the closed cycle option); and spent fuel is stored and reprocessed in some countries (close cycle option). Facilities dedicated to the research and development of new fuel or new processes are also considered as Fuel Cycle Facilities. The safety assessment of nuclear facilities has often been led by the methodology and techniques initially developed for Nuclear Power Plants. As FCFs cover a wide diversity of installations the various approaches of national regulators, and their technical support organizations, for the Safety Assessment of Fuel Cycle Facilities are also diverse, as are the approaches by their industries in providing safety justifications for their facilities. The objective of the Working Group on Fuel Cycle Safety is to advance the understanding for both regulators and operators of relevant aspects of nuclear fuel cycle safety in member countries. A large amount of experience is available in safety assessment of FCFs, which should be shared to develop ideas in this field. To contribute to this task, the Workshop on 'Safety Assessment of Fuel Cycle Facilities - Regulatory Approaches and Industry Perspectives' was held in Toronto, on 27 - 29 September 2011. The workshop was hosted by Canadian Nuclear Safety Commission. The current proceedings provide summary of the results of the workshop with the text of the papers given and presentations made

Use of ultrasounds in the food industry-Methods and effects on quality, safety, and organoleptic characteristics of foods: A review.

Science.gov (United States)

Arvanitoyannis, Ioannis S; Kotsanopoulos, Konstantinos V; Savva, Amalia G

2017-01-02

The use of ultrasounds has recently gained significant interest in the food industry mainly due to the new trends of consumers toward functional foods. Offering several advantages, this form of energy can be applied for the improvement of qualitative characteristics of high-quality foods as well as for assuring safety of a vast variety of foodstuffs, and at the same time minimizing any negative effects of the sensory characteristics of foods. Furthermore, the non-destructive nature of this technology offers several opportunities for the compositional analysis of foods. However, further research is required for the improvement of related techniques and the reduction of application costs in order to render this technology efficient for industrial use. This review paper covers the main applications of ultrasounds as well as several advantages of the use of the technology in combination with conventional techniques. The effects of ultrasounds on the characteristics, microbial safety, and quality of several foods are also detailed.

76 FR 21932 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Granting...

Science.gov (United States)

2011-04-19

... statement therein, as follows: I. Introduction On February 4, 2011, the Financial Industry Regulatory...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Granting Approval of a... Financial Industry Regulatory Authority, Inc. (``FINRA'') to amend Rule 13806 of the Code of Arbitration...

Radiological safety programs in the petroleum and petrochemistry industry of Venezuela

International Nuclear Information System (INIS)

Romero M, C.

1996-01-01

A diagnosis carried out five years ago showed that in Petroleos de Venezuela (PDVSA) and its subsidiaries, exist about 530 radioactive sources. Also, about 1500 workers were also occupationally exposed, during operations such as industrial radiography and well logging. The same study determined the occurrence of some non-reported accidents and incidents with the overexposure of workers, specially contractors. Most of these problems were the result of the bad application of the radiological protection practices, and on the other hand, the disregarding of the governmental authorities in applying the regulatory standards. In order to solve this situation, PDVSA settled the safety guide for working with ionizing radiation, in which guidelines and technical advice are stablished to perform a safer work with radioactive elements. A radiological protection program was also organized in all the company operational areas. The paper includes the programs, practices and procedures implemented by PDVSA and its subsidiaries. Besides, the result of applying this comprehensive radiation protection program will be showed. (author). 1 ref

Safety performance evaluation using proactive indicators in a selected industry

Directory of Open Access Journals (Sweden)

Abolfazl Barkhordari

2015-03-01

Full Text Available Background & Objectives: Quality and effectiveness of safety systems are critical factors in achieving their goals. This study was aimed to represent a method for performance evaluation of safety systems by proactive indicators using different updated models in the field of safety which will be tested in a selected industry. Methods: This study is a cross-sectional study. Proactive indicators used in this study were: Unsafe acts rate, Safety Climate, Accident Proneness, and Near-miss incident rate. The number of in 1473 safety climate questionnaires and 543 Accident Proneness questionnaires was completed. Results: The minimum and maximum safety climate score were 56.88 and 58.2, respectively, and the minimum and maximum scores of Accident Proneness were 98.2 and 140.7, respectively. The maximum number of Near-miss incident rate were 408 and the minimum of that was 196. The maximum number of unsafe acts rate was 43.8 percent and the minimum of that was 27.2 percent. In nine dimensions of Safety climate the eighth dimension (personal perception of risk with the score of 4.07 has the lowest score and the fourth (laws and safety regulations dimension with 8.05 has the highest score. According to expert opinions, the most important indicator in the assessment of safety performance was unsafe acts rate, while near-miss incident rate was the least important one. Conclusion: The results of this survey reveal that using proactive (Prospective indicators could be an appropriate method in organizations safety performance evaluation.

A Review of the Poultry Meat Production Industry for Food Safety in Indonesia

Science.gov (United States)

Wahyono, N. D.; Utami, M. M. D.

2018-01-01

Poultry meat is an indispensable source of animal protein in human growth and development, so it is in great demand by people all over the world. Poultry meat has several advantages, namely the quality of nutrition is good enough, delicious taste, relatively affordable price, easy to get and accepted all levels of society with diverse backgrounds. The era of globalization requires competitive products, such as chicken meat in Indonesia, the current chicken meat industry is not only based on high production capacity and decreased production costs but also chicken products are safe to eat. As a consequence of trade liberalization, the poultry industry faces the threat of competition with cheaper products with better quality. The food safety of chicken meat starts from the farm, processing process until consumed. Food safety is a requirement of food products that must be handled by involving government, industry and consumers.

Identifying the Critical Factors Affecting Safety Program Performance for Construction Projects within Pakistan Construction Industry

Directory of Open Access Journals (Sweden)

Zubair Ahmed Memon

2013-04-01

Full Text Available Many studies have shown that the construction industry one of the most hazardous industries with its high rates of fatalities and injuries and high financial losses incurred through work related accident. To reduce or overcome the safety issues on construction sites, different safety programs are introduced by construction firms. A questionnaire survey study was conducted to highlight the influence of the Construction Safety Factors on safety program implementation. The input from the questionnaire survey was analyzed by using AIM (Average Index Method and rank correlation test was conducted between different groups of respondents to measure the association between different groups of respondent. The finding of this study highlighted that management support is the critical factor for implementing the safety program on projects. From statistical test, it is concluded that all respondent groups were strongly in the favor of management support factor as CSF (Critical Success Factor. The findings of this study were validated on selected case studies. Results of the case studies will help to know the effect of the factors on implementing safety programs during the execution stage.

Rent-seeking mechanism for safety supervision in the Chinese coal industry based on a tripartite game model

International Nuclear Information System (INIS)

Chen, Hong; Feng, Qun; Cao, Jing

2014-01-01

There are extensive governmental rent-seeking activities in safety supervision of the Chinese coal industry. The rents come from industry safety barriers, low resource taxes, and privilege policies for coalmining enterprises. The rent-seeking mechanism was analyzed using a model comprising dynamic games with incomplete information. The equilibrium results indicate that the probability of national supervision is influenced by penalties and bribery: there is negative correlation with penalties and positive correlation with bribery. The rent-seeking probability of a governmental safety supervision department is influenced by several factors, and positively correlates with the cost of national supervision. The probability of bribery of coalmining enterprises is influenced by several factors, and positively correlates with wages of governmental departments and a reasonable rent-seeking range. Reversed rent-seeking reduces the probability of bribery, but it's not worth recommending. Some recommendations are proposed. - Highlights: • We analyze rent-seeking mechanism for safety supervision in the coal industry. • A dynamic game with incomplete information for Chinese coal industry is built. • Reversed rent-seeking is proposed as a new rent-seeking form. • We analyze the selection probability of the three participants. • We give some policies about how to enhance safety supervision

Systematic impact of institutional pressures on safety climate in the construction industry.

Science.gov (United States)

He, Qinghua; Dong, Shuang; Rose, Timothy; Li, Heng; Yin, Qin; Cao, Dongping

2016-08-01

This paper explores how three types of institutional pressure (i.e., coercive, mimetic and normative pressures) systematically impact on the safety climate of construction projects. These impacts are empirically tested by survey data collected from 186 questionnaires of construction companies operating in Shanghai, China. The results, obtained by partial least squares analysis, show that organizational management commitment to safety and employee involvement is positively related to all three institutional pressures, while the perception of responsibility for safety and health is significantly influenced by coercive and mimetic pressure. However, coercive and normative pressures have no significant effect on the applicability of safety rules and work practices, revealing the importance of external organizational pressures in improving project safety climate from a systematic view. The findings also provide insights into the use of institutional forces to facilitate the improvement of safety climate in the construction industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

The industry commitment to global transport safety standards

International Nuclear Information System (INIS)

Green, L.

2004-01-01

Standards and regulations have no intrinsic practical effect without taking into account those who are the object of such standards and regulations. Standards and regulations do not become operationally effective until they are implemented by the entities which are subject to them. Accordingly, there is a necessary synergy between the regulator and the regulated - the regulators whose task it is to make and enforce the rules for safe, efficient and reliable transport, and those whose job it is to transport within the rules. One has no full meaning without the other. Harmonisation issues which can impede efficient and timely implementation of regulations can occur at any stage of the process, starting with the timely publication of the IAEA Regulations, incorporation by the modal organisations, adoption by national competent authorities and finally, rendered operational by industrial transport organisations. Both, the regulator and the transporter, can be more effective in achieving their purposes when they co-operate in the interest of mutual understanding. PATRAM provides one excellent opportunity for such exchange between the regulator and the regulated - there are other important opportunities within the IAEA and international modal organisations. I suggest, however, that more could be done between the regulators and the regulated collectively to share real-life experiences with actually implementing the regulations and operating within them, and to draw appropriate lessons. In the case of the international transport safety regulatory regime, it is the nuclear transport industry, such as represented by the World Nuclear Transport Institute (WNTI), which is, of course, the object of transport safety standards and regulations. And as such, the nuclear transport industry is a principal stakeholder in the regime. Regulatory compliance is a cornerstone of the nuclear transport industry. The international nature of the fuel cycle mandates transnational movement of

The industry commitment to global transport safety standards

International Nuclear Information System (INIS)

Green, L.

2004-01-01

Standards and regulations have no intrinsic practical effect without taking into account those who are the object of such standards and regulations. Standards and regulations do not become operationally effective until they are implemented by the entities which are subject to them. Accordingly, there is a necessary synergy between the regulator and the regulated-the regulators whose task it is to make and enforce the rules for safe, efficient and reliable transport, and those whose job it is to transport within the rules. One has no full meaning without the other. Harmonisation issues which can impede efficient and timely implementation of regulations can occur at any stage of the process, starting with the timely publication of the IAEA regulations, incorporation by the modal organisations, adoption by national competent authorities and finally, rendered operational by industrial transport organisations. Both the regulator and the transporter can be more effective in achieving their purposes when they cooperate in the interest of mutual understanding. PATRAM provides one excellent opportunity for such exchange between the regulator and the regulated-there are other important opportunities within the IAEA and international modal organisations. It is suggested, however, that more could be done between the regulators and the regulated collectively to share real-life experiences with actually implementing the regulations and operating within them, and to draw appropriate lessons. In the case of the international transport safety regulatory regime, it is the nuclear transport industry, such as represented by the World Nuclear Transport Institute (WNTI), which is, of course, the object of transport safety standards and regulations. And as such, the nuclear transport industry is a principal stakeholder in the regime. Regulatory compliance is a cornerstone of the nuclear transport industry. The international nature of the fuel cycle mandates transnational movement of

The industry commitment to global transport safety standards

Energy Technology Data Exchange (ETDEWEB)

Green, L. [World Nuclear Transport Inst., London (United Kingdom)

2004-07-01

Standards and regulations have no intrinsic practical effect without taking into account those who are the object of such standards and regulations. Standards and regulations do not become operationally effective until they are implemented by the entities which are subject to them. Accordingly, there is a necessary synergy between the regulator and the regulated - the regulators whose task it is to make and enforce the rules for safe, efficient and reliable transport, and those whose job it is to transport within the rules. One has no full meaning without the other. Harmonisation issues which can impede efficient and timely implementation of regulations can occur at any stage of the process, starting with the timely publication of the IAEA Regulations, incorporation by the modal organisations, adoption by national competent authorities and finally, rendered operational by industrial transport organisations. Both, the regulator and the transporter, can be more effective in achieving their purposes when they co-operate in the interest of mutual understanding. PATRAM provides one excellent opportunity for such exchange between the regulator and the regulated - there are other important opportunities within the IAEA and international modal organisations. I suggest, however, that more could be done between the regulators and the regulated collectively to share real-life experiences with actually implementing the regulations and operating within them, and to draw appropriate lessons. In the case of the international transport safety regulatory regime, it is the nuclear transport industry, such as represented by the World Nuclear Transport Institute (WNTI), which is, of course, the object of transport safety standards and regulations. And as such, the nuclear transport industry is a principal stakeholder in the regime. Regulatory compliance is a cornerstone of the nuclear transport industry. The international nature of the fuel cycle mandates transnational movement of

Analyzing the Contents of the Orders on Accounting Policy of Hotel Industry Enterprises

Directory of Open Access Journals (Sweden)

Kovalevskaya Nadezhda S.

2017-10-01

Full Text Available The article is aimed at carrying out an analysis of the contents of the orders on accounting policy of hotel industry enterprises and developing an optimal structure of the accounting policy parameters for the enterprises in this sphere. The contents of the «On accounting policy» orders was analyzed in terms of the organizational, technical and methodological divisions of the hotel industry enterprises of the Kharkiv region. In order to optimize the accounting process at the hotel industry enterprises, a structure of the hotel’s accounting policy parameters has been developed and recommendations have been made to improve the methodology of its design, which would facilitate rationalizing the formation of information resources to manage enterprise and improve performance without significant changes in the organizational structure and substantial financial investment.

Revolutionizing safety and security in the chemical and process industry: applying the CHESS concept

NARCIS (Netherlands)

Reniers, G.L.L.M.E.; Khakzad Rostami, N.

2017-01-01

This paper argues that a new concept, summarized as ‘CHESS’, should be used in the chemical industry to further substantially advance safety (where we use the term in a broad sense, that is, safety and physical security, amongst others). The different domains that need to be focused upon, and where

Managing change in the nuclear industry: The effects on safety. INSAG-18. A report by the International Nuclear Safety Advisory Group (Russian Edition)

International Nuclear Information System (INIS)

2015-01-01

The nuclear industry is going through a period of unprecedented change. The changes arise from the political and business environment in which the industry must operate, and from within the industry itself as it strives to become more competitive. These pressures have already led to significant changes in how nuclear enterprises are organized. The changes can be expected to continue. It is absolutely essential that throughout the period of time that organizational changes are taking place, and after the changes have occurred, very high standards of safety are maintained by all the elements that make up the industry. Changes can be made effectively and safely, and gains in efficiency and competitiveness, as well as safety, can be realized if changes are introduced carefully and managed well. Experience has shown that this is not a simple matter to achieve. Nuclear installations are complex, and it is inherently demanding to foresee all the implications that a change may have on safety. However, experience has shown very clearly that many changes have a strong potential to affect both the safety that has been built into a design and in the safety culture of an organization. Hence failure to manage change well can significantly affect the likelihood of an accident, the degree to which the assets of the company are put at risk and the company's reputation. This INSAG report is directed at members of boards of directors and senior executives who are responsible for the overall safety of an installation, who make decisions for change and who implement these decisions. It is also written for senior regulators who, on behalf of the public, ensure that boards of directors and executives meet their responsibilities for safety. This report discusses how and why change can challenge the maintenance of a high level of safety, and what can be done to control that challenge and hence reap all the benefits of change. It draws an analogy between the well established principles

Nuclear safety. Summary of the intermediate report of the special joint parliamentary committee on nuclear safety, present and future outlook of the nuclear industry

International Nuclear Information System (INIS)

Birraux, Claude; Bataille, Christian; Sido, Bruno

2011-09-01

Following the Fukushima events, the Parliamentary Office for Scientific and Technological Assessment (OPECST) was officially asked at the end of March 2011 - jointly by the National Assembly Bureau and by the Senate Committee on the economy, sustainable development, territorial and regional planning - to carry out a study on nuclear safety, and the present and future outlook of the nuclear industry. To carry out this study, seven members of the National Assembly economic affairs and sustainable development committees were also involved, as well as eight members of the Senate Committee on the economy, sustainable development, territorial and regional planning. The first part of this study, devoted to nuclear safety, was completed on 30 June 2011 by the publication of an intermediate report. This report assembles and summarises the information collected during six public hearings and seven trips to nuclear sites. France is one of the nuclear countries where the management of safety is both the most demanding and the most transparent. In this respect, the independence of the Safety Authority is the best guarantee of strictness in the safety field and the existence of pluralistic bodies, such as the Local Information Committees, is the best guarantee of the transparency of safety. But no country can pride itself on being totally safe from a natural disaster of an unexpected scale. The French nuclear industry must therefore ratchet up one more notch its investment in safety and strengthen the means of university research. It must imagine events of even greater intensity, cascading accidents, with interactions between neighbouring industrial sites. Investment must be made by placing safety requirements above any economic consideration and in strict compliance with the specifications of public authorities supervising safety. (authors)

Safety Culture: A Requirement for New Business Models — Lessons Learned from Other High Risk Industries

International Nuclear Information System (INIS)

Kecklund, L.

2016-01-01

Technical development and changes on global markets affects all high risk industries creating opportunities as well as risks related to the achievement of safety and business goals. Changes in legal and regulatory frameworks as well as in market demands create a need for major changes. Several high risk industries are facing a situation where they have to develop new business models. Within the transportation domain, e.g., aviation and railways, there is a growing concern related to how the new business models may affects safety issues. New business models in aviation and railways include extensive use of outsourcing and subcontractors to reduce costs resulting in, e.g., negative changes in working conditions, work hours, employment conditions and high turnover rates. The energy sector also faces pressures to create new business models for transition to renewable energy production to comply with new legal and regulatory requirements and to make best use of new reactor designs. In addition, large scale phase out and decommissioning of nuclear facilities have to be managed by the nuclear industry. Some negative effects of new business models have already arisen within the transportation domain, e.g., the negative effects of extensive outsourcing and subcontractor use. In the railway domain the infrastructure manager is required by European and national regulations to assure that all subcontractors are working according to the requirements in the infrastructure managers SMS (Safety Management System). More than ten levels of subcontracts can be working in a major infrastructure project making the system highly complex and thus difficult to control. In the aviation domain, tightly coupled interacting computer networks supplying airport services, as well as air traffic control, are managed and maintained by several different companies creating numerous interfaces which must be managed by the SMS. There are examples where a business model with several low

77 FR 75439 - Guidances for Industry and Investigators on Safety Reporting Requirements for Investigational New...

Science.gov (United States)

2012-12-20

...] Guidances for Industry and Investigators on Safety Reporting Requirements for Investigational New Drug Applications and Bioavailability/Bioequivalence Studies, and a Small Entity Compliance Guide; Availability... Reporting Requirements for INDs and BA/BE Studies'' and ``Safety Reporting Requirements for INDs and BA/BE...

Preliminary results from the application of risk matrix method for safety assessment in industrial radiography

International Nuclear Information System (INIS)

Lopez G, A.; Cruz, D.; Truppa, W.; Aravena, M.; Tamayo, B.

2015-09-01

Although the uses of ionizing radiation in industry are subject to procedures that provide a high level of safety, experience has shown that equipment failure, human errors, or the combination of both that can trigger accidental exposures may occur. Traditionally, the radiation safety checks whether these industrial practices (industrial radiography, industrial irradiators, among others) are sufficiently safe to prevent similar accidental exposures already occurred, so that becomes dependent on the published information and not always answers questions like: What other events can occur, or what other risks are present? Taking into account the results achieved by the Foro Iberoamericano de Organismos Reguladores Radiologicos y Nucleares, its leading position in the use of techniques of risk analysis in radioactive facilities and the need to develop a proactive approach to the prevention of accidents arising from the use of ionizing radiations in the industry, it intends to apply the risk analysis technique known as Risk Matrix to a hypothetical reference entity for the region in which industrial radiography is performed. In this paper the results of the first stage of this study are shown, that is the identification of initiating events (IE) and barriers that help mitigate the consequences of such IE, so that can appreciate the applicability of this method to industrial radiography services, to reduce the risk to acceptable levels. The fundamental advantage associated with the application of this methodology is that can be applied by the professionals working in the service and identifies specific weaknesses that from the point of view of safety there, so they can be prioritized resources depending on risk reduction. (Author)

75 FR 41254 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving a...

Science.gov (United States)

2010-07-15

... registered capacity, may work in other investment-related industries, such as financial planning, or may seek...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving a Proposed Rule..., 2010, the Financial Industry Regulatory Authority, Inc. (``FINRA'') filed with the Securities and...

Health and safety aspects of textile workers from Solapur (India textile industries

Directory of Open Access Journals (Sweden)

Rahul B Hiremath

2014-12-01

Full Text Available Introduction: Textile sector in India plays an important role in the country's economy, providing employment to a significant population in rural and urban areas. Objectives: This paper focuses on health and safety aspects of textile workers in Solapur City (one of the key textile cluster in the state of Maharashtra, India. Methodology: A sample of 180 workers from the identified textile industries of Solapur city were assessed for their general physique, muscle tone, lung condition, and eyesight using different techniques. The study aimed at developing a framework for understanding risks to textile workers resulting from lack of health and safety standards in companies. Results: Findings showed that most of the workers have been affected by respiratory problems, increase in muscle tone, eye problems and musculoskeletal problem. It has been also observed that job security or regular work impacts positively to the worker’s long term body health. However, there is an immediate need to adopt and implement measures in accordance with Indian Factories Act (OHSAS 18001/ILO-OSH 2001 which includes directions and procedures in respect of industrial installations, work environment and occupational health and safety guidelines.

Examination of issues related to the development and implementation of real-time operational safety monitoring tools in the nuclear power industry

International Nuclear Information System (INIS)

Puglia, William J.; Atefi, Bahman

1995-01-01

In recent years, risk and reliability techniques have been increasingly used to optimize deterministic requirements and to improve the operational safety of nuclear power stations. This paper discusses the historical development and current status of implementation of real-time operational safety monitoring tools in the nuclear power industry worldwide. A safety monitor is defined as a PC-based risk management tool, based on a plant specific PSA, which can be used to manage plant safety during the day-to-day operation of a nuclear power plant by planning maintenance activities and providing advisory information to plant operational staff in order to avoid high risk plant configurations. As this technique has only been applied in a few plants worldwide, the technology is still evolving and there are several technical and implementation-related issues which still need to be resolved. This paper attempts to summarize all such issues and describe how they have been addressed in several different applications of this technology around the world

Proceedings of the Seminar on Environmental and Radiation Safety Aspect at Non-nuclear Industry

International Nuclear Information System (INIS)

Mulyadi Rachmad; Muhammad Fathoni; Topo Suprihadi, PY.; Dumais, Johannes Robert; Eri Hiswara; Alatas, Zubaidah; Dahlan, Kgs.; Muhammad Isnaini

2003-03-01

The Seminar on Environmental and Radiation Safety Aspect at Non-nuclear Industry held on March 2003 in Jakarta. The purpose of this Seminar be able to information exchange among research workers in National Nuclear Energy Agency. The Seminar discussed about Science and Technology of Radiation Safety and Environment. There are 17 papers which have separated index. (PPIN)

Wireless Sensing Based on RFID and Capacitive Technologies for Safety in Marble Industry Process Control

Directory of Open Access Journals (Sweden)

Fabrizio Iacopetti

2013-01-01

Full Text Available This paper presents wireless sensing systems to increase safety and robustness in industrial process control, particularly in industrial machines for marble slab working. The process is performed by abrasive or cutting heads activated independently by the machine controller when the slab, transported on a conveyer belt, is under them. Current slab detection systems are based on electromechanical or optical devices at the machine entrance stage, suffering from deterioration and from the harsh environment. Slab displacement or break inside the machine due to the working stress may result in safety issues and damages to the conveyer belt due to incorrect driving of the working tools. The experimented contactless sensing techniques are based on four RFID and two capacitive sensing technologies and on customized hardware/software. The proposed solutions aim at overcoming some limitations of current state-of-the-art detection systems, allowing for reliable slab detection, outside and/or inside the machine, while maintaining low complexity and at the same time robustness to industrial harsh conditions. The proposed sensing devices may implement a wireless or wired sensor network feeding detection data to the machine controller. Data integrity check and process control algorithms have to be implemented for the safety and reliability of the overall industrial process.

76 FR 66344 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving...

Science.gov (United States)

2011-10-26

...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving Proposed Rule Change... 31, 2011, Financial Industry Regulatory Authority, Inc. (``FINRA'') (f/k/a National Association of... consolidation process, see Information Notice, March 12, 2008 (Rulebook Consolidation Process). For convenience...

75 FR 17456 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving...

Science.gov (United States)

2010-04-06

...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving Proposed Rule Change..., Financial Industry Regulatory Authority, Inc. (``FINRA'') filed with the Securities and Exchange Commission... terms. For more information about the rulebook consolidation process, see Information Notice, March 12...

A comparison of the difference of requirements between functional safety and nuclear safety controllers

Energy Technology Data Exchange (ETDEWEB)

Chen, C.K.; Lee, C.L.; Shyu, S.S. [Inst. of Nuclear Energy Research, Taoyuan, Taiwan (China)

2014-07-01

In order to establish self-reliant capabilities of nuclear I&C systems in Taiwan, Taiwan's Nuclear I&C System (TNICS) project had been established by Institute of Nuclear Energy Research (INER). A Triple Modular Redundant (TMR) safety controller (SCS-2000) has been completed and gone through the IEC 61508 Safety Integrity Level 3 (SIL3) certification of Functional Safety for industries. Based on the certification processes, the difference of requirements between Functional Safety and Nuclear Safety controllers in term of hardware and software are addressed in this study. Besides, the measures used to determine and verify the reliability of the safety control system design are presented. (author)

A novel approach to enhance food safety: industry-academia-government partnership for applied research.

Science.gov (United States)

Osterholm, Michael T; Ostrowsky, Julie; Farrar, Jeff A; Gravani, Robert B; Tauxe, Robert V; Buchanan, Robert L; Hedberg, Craig W

2009-07-01

An independent collaborative approach was developed for stimulating research on high-priority food safety issues. The Fresh Express Produce Safety Research Initiative was launched in 2007 with $2 million in unrestricted funds from industry and independent direction and oversight from a scientific advisory panel consisting of nationally recognized food safety experts from academia and government agencies. The program had two main objectives: (i) to fund rigorous, innovative, and multidisciplinary research addressing the safety of lettuce, spinach, and other leafy greens and (ii) to share research findings as widely and quickly as possible to support the development of advanced safeguards within the fresh-cut produce industry. Sixty-five proposals were submitted in response to a publicly announced request for proposals and were competitively evaluated. Nine research projects were funded to examine underlying factors involved in Escherichia coli O157:H7 contamination of lettuce, spinach, and other leafy greens and potential strategies for preventing the spread of foodborne pathogens. Results of the studies, published in the Journal of Food Protection, help to identify promising directions for future research into potential sources and entry points of contamination and specific factors associated with harvesting, processing, transporting, and storing produce that allow contaminants to persist and proliferate. The program provides a model for leveraging the strengths of industry, academia, and government to address high-priority issues quickly and directly through applied research. This model can be productively extended to other pathogens and other leafy and nonleafy produce.

ACHIEVEMENT OF THE HIGHEST LEVEL OF SAFETY AND HEALTH AT WORK AND THE SATISFACTION OF EMPLOYEES IN THE TEXTILE INDUSTRY

Directory of Open Access Journals (Sweden)

Snezana Urosevic

2016-12-01

Full Text Available Safety and health at work involves the exercise of such working conditions that take certain measures and activities in order to protect the life and health of employees. The interest of society, of all stakeholders and every individual is to achieve the highest level of safety and health at work, to unwanted consequences such as injuries, occupational diseases and diseases related to work are reduced to a minimum, and to create the conditions work in which employees have a sense of satisfaction in the performance of their professional duties. Textile industry is a sector with higher risk, because the plants of textile industry prevailing unfavorable microclimate conditions: high air temperature and high humidity, and often insufficient illumination of rooms and increased noise. The whole line of production in the textile industry, there is a risk of injury, the most common with mechanical force, or gaining burns from heat or chemicals. All of these factors are present in the process of production and processing of textiles and the same may affect the incidence of occupational diseases of workers, absenteeism, reduction of their working capacity and productivity. With the progress of the textile industry production increases in the number of hazardous and harmful substances that may pose a potential danger to the employee in this branch of the economy as well as the harmful impact on the environment. Therefore, it is important to give special attention to these problems.

The development of safety criteria for use in the nuclear industry

International Nuclear Information System (INIS)

Higson, D.J.

1978-01-01

Limits to routine radiation exposure have been laid down in the health regulations of industrial nations and provide a basis for the safe operation of nuclear power stations, uranium mines and other nuclear installations. However, these limits do not take account of the possibility of accidents, which may also be a major concern in the sitting and design of plants. In this paper specific limits to fatal accident frequencies are recommended. An indication of the required level of safety has been derived from the records of other industries and human activities which are already regarded as safe

Prioritized schedule for review of industrial safety and occupational health programs

International Nuclear Information System (INIS)

1996-12-01

This document provides the rationale and criteria for developing a schedule for reviewing the Industrial Safety and Occupational Health programs for the Management and Operating Contractor (MOC) of the Waste Isolation Pilot Plant. The reviews will evaluate the MOC's compliance with applicable Department of Energy (DOE) orders and regulatory requirements. The scope of this task includes developing prioritization criteria, determining the review priority of each program based upon the criteria, identifying review requirements for each program, and preparing a detailed review schedule. In keeping with the Carlsbad Area Office (CAO) structure for the review of site activities, these review activities will be addressed as surveillances, although the original basis for this requirement refers to these activities as appraisals. Surveillances and appraisals are the same within this document. Surveillances are defined as: ''The act of monitoring or observing to verify whether an item, activity, system, or process conforms to specified requirements. Surveillance of a technical work activity is normally done in real time, i.e., the surveillance is accomplished as the work is being performed.''

Facilities management and industrial safety

International Nuclear Information System (INIS)

2003-06-01

This book lists occupation safety and health acts with purpose, definition and management system of safety and health, enforcement ordinance of occupation safety and health acts and enforcement regulations such as general rules, safety and health cover, system of management on safety and health, regulation of management on safety and health, regulations of harmfulness and protection of danger, heath management for workers, supervisor and command and inspection of machine and equipment.

The costs of uncertainty: regulating health and safety in the Canadian uranium industry

International Nuclear Information System (INIS)

Robinson, I.

1982-04-01

Federalism, and particularly federal/provincial jurisdictional relationships, have led to considerable uncertainty in the regulation of occupational health and safety and of environmental protection in the Canadian uranium mining industry. The two principal uranium producing provinces in Canada are Saskatchewan and Ontario. Since 1978, in an attempt to avoid constitutional issues, both these provinces and the federal government as well have proceeded unilaterally with health and safety reforms for the industry. In Saskatchewan this has resulted in areas of overlapping jurisdiction, which have led to uncertainty over the legal enforceability of the provincial regulations. In Ontario, the province has left significant gaps in the protection of both workers and the environment. Little progress can be expected in eliminating these gaps and overlaps until the current administrative and jurisdictional arrangements are understood

The 'PROCESO' index: a new methodology for the evaluation of operational safety in the chemical industry

International Nuclear Information System (INIS)

Marono, M.; Pena, J.A.; Santamaria, J.

2006-01-01

The acknowledgement of industrial installations as complex systems in the early 1980s outstands as a milestone in the path to operational safety. Process plants are social-technical complex systems of a dynamic nature, whose properties depend not only on their components, but also on the inter-relations among them. A comprehensive assessment of operational safety requires a systemic approach, i.e. an integrated framework that includes all the relevant factors influencing safety. Risk analysis methodologies and safety management systems head the list of methods that point in this direction, but they normally require important plant resources. As a consequence, their use is frequently restricted to especially dangerous processes often driven by compliance with legal requirements. In this work a new safety index for the chemical industry, termed the 'Proceso' Index (standing for the Spanish terms for PROCedure for the Evaluation of Operational Safety), has been developed. PROCESO is based on the principles of systems theory, has a tree-like structure and considers 25 areas to guide the review of plant safety. The method uses indicators whose respective weight values have been obtained via an expert judgement technique. This paper describes the steps followed to develop this new Operational Safety Index, explains its structure and illustrates its application to process plants

The health and safety concerns of immigrant women workers in the Toronto sportswear industry.

Science.gov (United States)

Gannagé, C M

1999-01-01

Immigrant women's conditions of work have worsened with new government and managerial strategies to restructure the Canadian apparel industry. Changes in occupational health and safety legislation have both given and taken away tools that immigrant women workers could use to improve the quality of their working lives. The author outlines a methodology for eliciting the health and safety concerns of immigrant women workers.

Reliability-based approaches for safety margin assessment in the French nuclear industry

International Nuclear Information System (INIS)

Ardillon, E.; Barthelet, B.; Meister, E.; Cambefort, P.; Hornet, P.; Le Delliou, P.

2003-01-01

The prevention of the fast fracture damage of the mechanical equipment important for the safety of nuclear islands of the French PWR relies on deterministic rules. These rules include flaw acceptance criteria involving safety factors applied to characteristic values (implicit margins) of the physical variables. The sets of safety factors that are currently under application in the industrial analyses with the agreement of the Safety Authority, are distributed across the two main physical parameters and have partly been based on a semi-probabilistic approach. After presenting the generic probabilistic pro-codification approach this paper shows its application to the evaluation of the performances of the existing regulatory flaw acceptance criteria. This application can be carried out in a realistic manner or in a more simplified one. These two approaches are applied to representative mechanical components. Their results are consistent. (author)

European downstream oil industry safety performance. Statistical summary of reported incidents 2009

International Nuclear Information System (INIS)

Burton, A.; Den Haan, K.H.

2010-10-01

The sixteenth such report by CONCAWE, this issue includes statistics on workrelated personal injuries for the European downstream oil industry's own employees as well as contractors for the year 2009. Data were received from 33 companies representing more than 97% of the European refining capacity. Trends over the last sixteen years are highlighted and the data are also compared to similar statistics from related industries. In addition, this report presents the results of the first Process Safety Performance Indicator data gathering exercise amongst the CONCAWE membership.

Regulatory role and approach of BARC Safety Council in safety and occupational health in BARC facilities

International Nuclear Information System (INIS)

Rajdeep; Jayarajan, K.; Taly, Y.K.

2016-01-01

Bhabha Atomic Research Centre is involved in multidisciplinary research and developmental activities, related to peaceful use of nuclear energy and its societal benefits. In order to achieve high level of performance of these facilities, the best efforts are made to maintain good health of the plant personnel and good working conditions. BARC Safety Council (BSC), which is the regulatory body for BARC facilities, regulates radiation safety, industrial safety and surveillance of occupational health, by implementing various rules and guidelines in BARC facilities. BARC Safety framework consists of various committees in a 3-tier system. The first tier is BSC, which is the apex body authorized for issuing directives, permissions, consents and authorizations. It is having responsibility of ensuring protection and safety of public, environment, personnel and facilities of BARC through enforcement of radiation protection and industrial safety programmes. Besides the 18 committees in 2"n"d tier, there are 6 other expert committees which assist in functioning of BSC. (author)

Assessing risks and regulating safety standards in the oil and gas industry: the Peruvian experience.

OpenAIRE

Arturo Leonardo Vásquez Cordano; Julio Salvador Jácome; Raúl Lizardo García Carpio; Victor Fernández Guzman

2013-01-01

Environmental regulation has usually focused on controlling continuous sources of pollution such as CO2 emissions through carbon taxes. However, the 2010 oil spill in the Gulf of Mexico has shown that accidents associated to safety failures can also generate bursts of pollution with serious environmental consequences. Regulating safety conditions to prevent accidents in the oil and gas industry is challenging because public regulators cannot perfectly observe whether firms comply with safety ...

Ensuring the Environmental and Industrial Safety in Solid Mineral Deposit Surface Mining

Science.gov (United States)

Trubetskoy, Kliment; Rylnikova, Marina; Esina, Ekaterina

2017-11-01

The growing environmental pressure of mineral deposit surface mining and severization of industrial safety requirements dictate the necessity of refining the regulatory framework governing safe and efficient development of underground resources. The applicable regulatory documentation governing the procedure of ore open-pit wall and bench stability design for the stage of pit reaching its final boundary was issued several decades ago. Over recent decades, mining and geomechanical conditions have changed significantly in surface mining operations, numerous new software packages and computer developments have appeared, opportunities of experimental methods of source data collection and processing, grounding of the permissible parameters of open pit walls have changed dramatically, and, thus, methods of risk assessment have been perfected [10-13]. IPKON RAS, with the support of the Federal Service for Environmental Supervision, assumed the role of the initiator of the project for the development of Federal norms and regulations of industrial safety "Rules for ensuring the stability of walls and benches of open pits, open-cast mines and spoil banks", which contribute to the improvement of economic efficiency and safety of mineral deposit surface mining and enhancement of the competitiveness of Russian mines at the international level that is very important in the current situation.

The safety of a nuclear industry in South Australia

International Nuclear Information System (INIS)

Higson, D.J.

2016-01-01

On 19 March 2015, the South Australian Government established a Royal Commission to consider and analyse the potential of South Australia to further participate in the nuclear fuel cycle, whether through the expansion of the current level of exploration, extraction and milling of uranium (the only parts of the nuclear power industry that are currently allowed in Australia) or by undertaking the conversion and enrichment of materials for the nuclear fuel cycle, the generation of electricity from nuclear fuels and/or the management, storage and disposal of nuclear wastes. This provides a timely opportunity to review the performance of the nuclear industry throughout the world, particularly in the safety of electricity generation and waste management, showing that - despite misconceptions about radiological risks and the significance of the accidents that have occurred - the record of this industry is exceptionally good. The Federal and South Australian State governments both have the policy that uranium mining is acceptable providing it is properly regulated. The success of this policy suggests that it is exactly the policy that should be adopted for all other parts of the nuclear fuel cycle, including the generation of electricity.

Relationships among Safety Climate, Safety Behavior, and Safety Outcomes for Ethnic Minority Construction Workers

Directory of Open Access Journals (Sweden)

Sainan Lyu

2018-03-01

Full Text Available In many countries, it is common practice to attract and employ ethnic minority (EM or migrant workers in the construction industry. This primarily occurs in order to alleviate the labor shortage caused by an aging workforce with a lack of new entrants. Statistics show that EM construction workers are more likely to have occupational fatal and nonfatal injuries than their local counterparts; however, the mechanism underlying accidents and injuries in this vulnerable population has been rarely examined. This study aims to investigate relationships among safety climate, safety behavior, and safety outcomes for EM construction workers. To this end, a theoretical research model was developed based on a comprehensive review of the current literature. In total, 289 valid questionnaires were collected face-to-face from 223 Nepalese construction workers and 56 Pakistani construction workers working on 15 construction sites in Hong Kong. Structural equation modelling was employed to validate the constructs and test the hypothesized model. Results show that there were significant positive relationships between safety climate and safety behaviors, and significant negative relationships between safety behaviors and safety outcomes for EM construction workers. This research contributes to the literature regarding EM workers by providing empirical evidence of the mechanisms by which safety climate affects safety behaviors and outcomes. It also provides insights in order to help the key stakeholders formulate safety strategies for EM workers in many areas where numerous EM workers are employed, such as in the U.S., the UK, Australia, Singapore, Malaysia, and the Middle East.

Relationships among Safety Climate, Safety Behavior, and Safety Outcomes for Ethnic Minority Construction Workers.

Science.gov (United States)

Lyu, Sainan; Hon, Carol K H; Chan, Albert P C; Wong, Francis K W; Javed, Arshad Ali

2018-03-09

In many countries, it is common practice to attract and employ ethnic minority (EM) or migrant workers in the construction industry. This primarily occurs in order to alleviate the labor shortage caused by an aging workforce with a lack of new entrants. Statistics show that EM construction workers are more likely to have occupational fatal and nonfatal injuries than their local counterparts; however, the mechanism underlying accidents and injuries in this vulnerable population has been rarely examined. This study aims to investigate relationships among safety climate, safety behavior, and safety outcomes for EM construction workers. To this end, a theoretical research model was developed based on a comprehensive review of the current literature. In total, 289 valid questionnaires were collected face-to-face from 223 Nepalese construction workers and 56 Pakistani construction workers working on 15 construction sites in Hong Kong. Structural equation modelling was employed to validate the constructs and test the hypothesized model. Results show that there were significant positive relationships between safety climate and safety behaviors, and significant negative relationships between safety behaviors and safety outcomes for EM construction workers. This research contributes to the literature regarding EM workers by providing empirical evidence of the mechanisms by which safety climate affects safety behaviors and outcomes. It also provides insights in order to help the key stakeholders formulate safety strategies for EM workers in many areas where numerous EM workers are employed, such as in the U.S., the UK, Australia, Singapore, Malaysia, and the Middle East.

Promoting Implementation of Safety Culture in Nuclear Application for Industrial Facilities; an Important Role of Nuclear Energy Regulatory Agency in Indonesia

International Nuclear Information System (INIS)

Setianingsih, Lilis Susanti

2012-01-01

Implementation of nuclear energy for industrial purposes has reached its highest peak. BAPETEN, as Nuclear Energy Regulatory Agency of Indonesia has published regulations regarding nuclear energy utilization. As high risk associating such utilization requires direct and thoroughly supervision in order to assure its compliance to safety and security aspect, procedures related to operational activities must by fully applied. Radiation Protection Program as one type of procedures that must be available in nuclear energy utilization operation is intended to provide operators specifically technical guidance to avoid undesired negative effects of incidents or accidents. It is the responsibility of managerial level in a company to provide the procedures and to further supervise their application in the field. Radiation workers, those are all employees working in or within radiation area must understand how to execute the procedures properly. The radiation protection program is intended to protect workers, member of community and property as well as the environment from the negative impacts of nuclear utilization operational due to its radiation exposure. Safety culture, a compound of nature derived from behavior of organization and people within the organization to pay a full attention and give main priority in radiation safety matters, is expected to be achieved by implementing the radiation protection program as safety habits at the work place. It requires a management commitment to ensure that all aspect in safety and, whenever necessary, security are accomplished within the radiation protection program in order to build a safety culture in a radiation work place. Government Regulation No. 33 2007 about Safety for Ionizing Radiation and Security for Radioactive Source and Government Regulation No. 29 2008 regarding Licensing for Utilization of Ionizing Radiation and Nuclear Material present regulation and arrangement related to radiation protection program as a basic

Promoting Implementation of Safety Culture in Nuclear Application for Industrial Facilities; an Important Role of Nuclear Energy Regulatory Agency in Indonesia

Energy Technology Data Exchange (ETDEWEB)

Setianingsih, Lilis Susanti [KINS-KAIST Master Degree Program, Daejeon (Korea, Republic of)

2012-03-15

Implementation of nuclear energy for industrial purposes has reached its highest peak. BAPETEN, as Nuclear Energy Regulatory Agency of Indonesia has published regulations regarding nuclear energy utilization. As high risk associating such utilization requires direct and thoroughly supervision in order to assure its compliance to safety and security aspect, procedures related to operational activities must by fully applied. Radiation Protection Program as one type of procedures that must be available in nuclear energy utilization operation is intended to provide operators specifically technical guidance to avoid undesired negative effects of incidents or accidents. It is the responsibility of managerial level in a company to provide the procedures and to further supervise their application in the field. Radiation workers, those are all employees working in or within radiation area must understand how to execute the procedures properly. The radiation protection program is intended to protect workers, member of community and property as well as the environment from the negative impacts of nuclear utilization operational due to its radiation exposure. Safety culture, a compound of nature derived from behavior of organization and people within the organization to pay a full attention and give main priority in radiation safety matters, is expected to be achieved by implementing the radiation protection program as safety habits at the work place. It requires a management commitment to ensure that all aspect in safety and, whenever necessary, security are accomplished within the radiation protection program in order to build a safety culture in a radiation work place. Government Regulation No. 33 2007 about Safety for Ionizing Radiation and Security for Radioactive Source and Government Regulation No. 29 2008 regarding Licensing for Utilization of Ionizing Radiation and Nuclear Material present regulation and arrangement related to radiation protection program as a basic

Accidents in industrial radiography and lessons to be learned. A review of IAEA Safety Report

International Nuclear Information System (INIS)

Modupe, M.S.; Oresegun, O.

1998-01-01

This IAEA Safety Report Series publication is the result of a review of a large selection of accidents in industrial radiography which Regulatory Authorities, professional associations and scientific journals have reported. The review's objective was to draw lessons from the initiating events of the accidents, contributing factors and the consequences. A small, representative selection of accident descriptions is used to illustrate the primary causes of radiography accidents and a set of recommendations to prevent recurrence of such accidents or to mitigate the consequences of those that do occur is provided. By far the most common primary cause of over-exposure was 'Failure to follow operational procedures' and specifically failure to perform radiation monitoring to locate the position of the source. The information in the Safety Report is intended for use by Regulatory Authorities, operating organizations, workers manufacturers and client organizations having responsibilities for radiation protection and safety in industrial radiography. (author)

Evaluation of radiological safety conditions of panoramic portable irradiators of industrial radiography used in Brazil

International Nuclear Information System (INIS)

Aquino, Josilto Oliveira de

2003-08-01

In Brazil, the applications of ionizing radiation in industrial area are performed in about 900 installations, in which around 3000 radioactive sources are handled. Industrial radiography represents 14 % of this total, with 217 X rays equipment and 287 gamma radiography apparatus, according to a survey conducted in the present work. From these gamma apparatus, 90 % employ 192 Ir sources, followed by 60 Co and 75 Se, with 5 % each. The great majority of the 192 Ir apparatus have been in continuous usage in Brazil for more than 20 years, which means that they are old equipment. The totality of the 11 models of 192 Ir apparatus used in Brazil is imported from abroad. Those apparatus are portable, and almost all operate according to category II, i.e., the source assembly is mechanically projected out of the container. This last characteristic, besides the fact that the apparatus are already old-fashioned and worn-out, raises concerns about their radiological safety. The main objective of this work was to develop a specific methodology for inspection, testing and assessment of the radiological safety devices and state of maintenance of the 192 Ir apparatus. The idea is to prevent accidents, as physical failures can lead to overexposure of working staffs. In order to accomplish this, almost a hundred 192 Ir apparatus, from the 11 models used in Brazil, were studied. According to our results, almost 20 % of the 97 apparatus evaluated presented some kind of unsafe condition for proper operation, like poor state of maintenance and faults at the lock that retains the source at the secure position. From the 11 imported models of 192 Ir apparatus in use in Brazil, six models were already manufactured incorporating the safety devices specified by the first edition of the Standard ISO 3999, edited in 1977. However, five models do not comply even with this first edition of the Standard ISO 3999. Thus, they lack some important and basic safety devices. None of the 11 models comply

Radiation safety practice in Sudan with respect to industrial radioisotope applications

International Nuclear Information System (INIS)

Ahmed, W.D.; Hassan, B.A.; Zeada, D.O.M.; Sirelkhatim, D.A.; Salih, S.A.; Hassan, M.S.

2008-06-01

The use of radioisotope technology in petrochemical industry in Sudan started in 2003, since then gamma scanning for distillation columns and tracer applications for leak detection was performed 6 times at a refinery 60 Km away from Khartoum, by Sudan Atomic Energy Commission II T group. This paper focuses on safety and radiation protection for this practice, also describes safety requirements, the emergency plan and evaluation of dose worker value which was done on these missions. The assessment of worker's doses performed showed that they are within an acceptable range. Recommendations are made to even bring them lower. The paper also sheds light on some problems raised and suggests remedial actions.(Author)

Safety analysis in the high risk industry: Similarities and differences with the nuclear approach

International Nuclear Information System (INIS)

Vilaragut LLanes, Juan Jose; Castillo Alvarez, Jorge Patricio

2001-01-01

In this article shows a conceptual aspects to the risk safety analysis, comparing them with the focus to the nuclear industry that has been characterized to be the pioneers in their systematized application

Nordic perspectives on safety management in high reliability organizations: Theory and applications

International Nuclear Information System (INIS)

Svenson, Ola; Salo, I.; Sjerve, A.B.; Reiman, T.; Oedewald, P.

2006-04-01

The chapters in this volume are written on a stand-alone basis meaning that the chapters can be read in any order. The first 4 chapters focus on theory and method in general with some applied examples illustrating the methods and theories. Chapters 5 and 6 are about safety management in the aviation industry with some additional information about incident reporting in the aviation industry and the health care sector. Chapters 7 through 9 cover safety management with applied examples from the nuclear power industry and with considerable validity for safety management in any industry. Chapters 10 through 12 cover generic safety issues with examples from the oil industry and chapter 13 presents issues related to organizations with different internal organizational structures. Although the many of the chapters use a specific industry to illustrate safety management, the messages in all the chapters are of importance for safety management in any high reliability industry or risky activity. The interested reader is also referred to, e.g., a document by an international NEA group (SEGHOF), who is about to publish a state of the art report on Systematic Approaches to Safety Management (cf., CSNI/NEA/SEGHOF, home page: www.nea.fr). (au)

Nordic perspectives on safety management in high reliability organizations: Theory and applications

Energy Technology Data Exchange (ETDEWEB)

Svenson, Ola; Salo, I; Sjerve, A B; Reiman, T; Oedewald, P [Stockholm Univ. (Sweden)

2006-04-15

The chapters in this volume are written on a stand-alone basis meaning that the chapters can be read in any order. The first 4 chapters focus on theory and method in general with some applied examples illustrating the methods and theories. Chapters 5 and 6 are about safety management in the aviation industry with some additional information about incident reporting in the aviation industry and the health care sector. Chapters 7 through 9 cover safety management with applied examples from the nuclear power industry and with considerable validity for safety management in any industry. Chapters 10 through 12 cover generic safety issues with examples from the oil industry and chapter 13 presents issues related to organizations with different internal organizational structures. Although the many of the chapters use a specific industry to illustrate safety management, the messages in all the chapters are of importance for safety management in any high reliability industry or risky activity. The interested reader is also referred to, e.g., a document by an international NEA group (SEGHOF), who is about to publish a state of the art report on Systematic Approaches to Safety Management (cf., CSNI/NEA/SEGHOF, home page: www.nea.fr). (au)

Transport of cobalt-60 industrial radiation sources

Science.gov (United States)

Kunstadt, Peter; Gibson, Wayne

This paper will deal with safety aspects of the handling of Cobalt-60, the most widely used industrial radio-isotope. Cobalt-60 is a man-made radioisotope of Cobalt-59, a naturally occurring non radioactive element, that is made to order for radiation therapy and a wide range of industrial processing applications including sterilization of medical disposables, food irradiation, etc.

Investigating the Process of Valuing Investments in Intangibles: A Case Study in Safety and Security in the Multinational Hotel Industry

OpenAIRE

Punpugdee, Nuttapon

2005-01-01

Safety and security have emerged as a major force driving change in the multinational hotel industry. As a problem area not well-developed in the literature but considered a crucial force influencing hotel firms' value by the multinational hotel community, safety and security provide an excellent opportunity for industry professionals and academic researchers to improve the value creation of multinational hotel firms. A research need is more urgent in the upscale sector of the industry, and t...

Study of system safety evaluation on LTO of national project. NISA safety research project on system safety of nuclear power plants

International Nuclear Information System (INIS)

Takizawa, Masayuki; Sekimura, Naoto; Miyano, Hiroshi; Aoyama, Katsunobu

2012-01-01

Japanese safety regulatory body, that is, Nuclear and Industrial Safety Agency (NISA) started a 5-year national safety research project as 'the first stage' from 2006 FY to 2010 FY whose objective is 'Improve the technical information basis in order to utilize knowledge as well as information related to ageing management and maintenance of NPPs. Fukushima disaster happened in March 2011, and the priority of research needs for ageing management dramatically changed in Japan. The second-stage national project started in October 2011 with the concept of 'system safety' of NNPs where not only ageing management on degradation phenomena of important components but also safety management on total plant systems are paid attention to. The second-stage project is so called 'Japanese Ageing Management Program for System Safety (JAMPSS)'. (author)

Information security as part of the nuclear safety culture

Energy Technology Data Exchange (ETDEWEB)

Sitnica, A., E-mail: demetrkj@westinghouse.com [Westinghouse Electric Co., 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States)

2016-09-15

No industry, organization, individual or even the government is immune to the information security risks which are associated with nuclear power. It can no longer be ignored, delayed or treated as unimportant. Nuclear safety is paramount to our industry, and cyber security must be woven into the fabric of our safety culture in order to succeed. Achieving this in an environment which has remained relatively unchanged and conservative prior to digitalisation demands a shift in behavior and culture. (Author)

Information security as part of the nuclear safety culture

International Nuclear Information System (INIS)

Sitnica, A.

2016-09-01

No industry, organization, individual or even the government is immune to the information security risks which are associated with nuclear power. It can no longer be ignored, delayed or treated as unimportant. Nuclear safety is paramount to our industry, and cyber security must be woven into the fabric of our safety culture in order to succeed. Achieving this in an environment which has remained relatively unchanged and conservative prior to digitalisation demands a shift in behavior and culture. (Author)

Modeling the Relationship between Safety Climate and Safety Performance in a Developing Construction Industry: A Cross-Cultural Validation Study.

Science.gov (United States)

Zahoor, Hafiz; Chan, Albert P C; Utama, Wahyudi P; Gao, Ran; Zafar, Irfan

2017-03-28

This study attempts to validate a safety performance (SP) measurement model in the cross-cultural setting of a developing country. In addition, it highlights the variations in investigating the relationship between safety climate (SC) factors and SP indicators. The data were collected from forty under-construction multi-storey building projects in Pakistan. Based on the results of exploratory factor analysis, a SP measurement model was hypothesized. It was tested and validated by conducting confirmatory factor analysis on calibration and validation sub-samples respectively. The study confirmed the significant positive impact of SC on safety compliance and safety participation , and negative impact on number of self-reported accidents/injuries . However, number of near-misses could not be retained in the final SP model because it attained a lower standardized path coefficient value. Moreover, instead of safety participation , safety compliance established a stronger impact on SP. The study uncovered safety enforcement and promotion as a novel SC factor, whereas safety rules and work practices was identified as the most neglected factor. The study contributed to the body of knowledge by unveiling the deviations in existing dimensions of SC and SP. The refined model is expected to concisely measure the SP in the Pakistani construction industry, however, caution must be exercised while generalizing the study results to other developing countries.

Corporate financial decision makers' perceptions of their company's safety performance, programs and personnel: Do company size and industry injury risk matter?

Science.gov (United States)

DeArmond, Sarah; Huang, Yueng-Hsiang; Chen, Peter Y; Courtney, Theodore K

2010-01-01

Top-level managers make important decisions about safety-related issues, yet little research has been done involving these individuals. The current study explored corporate financial decisions makers' perceptions of their company's safety and their justifications for these perceptions. This study also explored whether their perceptions and justifications varied as a function of company size or industry injury risk. A total of 404 individuals who were the most senior managers responsible for making decisions about property and casualty risk at their companies participated in this study. The participants took part in a telephone survey. The results suggest that corporate financial decision makers have positive views of safety at their companies relative to safety at other companies within their industries. Further, many believe their company's safety is influenced by the attention/emphasis placed on safety and the selection and training of safety personnel. Participants' perceptions varied somewhat based on the size of their company and the level of injury risk in their industry. While definitive conclusions about corporate financial decision makers' perceptions of safety cannot be reached as a result of this single study, this work does lay groundwork for future research aimed at better understanding the perceptions top-level managers.

An Examination of Safety Management Systems and Aviation Technologies in the Helicopter Emergency Medical Services Industry

Science.gov (United States)

Buckner, Steven A.

The Helicopter Emergency Medical Service (HEMS) industry has a significant role in the transportation of injured patients, but has experienced more accidents than all other segments of the aviation industry combined. With the objective of addressing this discrepancy, this study assesses the effect of safety management systems implementation and aviation technologies utilization on the reduction of HEMS accident rates. Participating were 147 pilots from Federal Aviation Regulations Part 135 HEMS operators, who completed a survey questionnaire based on the Safety Culture and Safety Management System Survey (SCSMSS). The study assessed the predictor value of SMS implementation and aviation technologies to the frequency of HEMS accident rates with correlation and multiple linear regression. The correlation analysis identified three significant positive relationships. HEMS years of experience had a high significant positive relationship with accident rate (r=.90; paviation technologies from a systems engineering application. Recommendations for practice included the adoption of existing regulatory guidance for a SMS program. A qualitative analysis was also recommended for future study SMS implementation and HEMS accident rate from the pilot's perspective. A quantitative longitudinal study would further explore inferential relationships between the study variables. Current strategies should include the increased utilization of available aviation technology resources as this proactive stance may be beneficial for the establishment of an effective safety culture within the HEMS industry.

75 FR 59771 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving the...

Science.gov (United States)

2010-09-28

...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving the Proposed Rule.... I. Introduction On July 27, 2010, the Financial Industry Regulatory Authority, Inc. (``FINRA'') (f/k... pertinent distribution-related information from its members in a timely fashion to facilitate its Regulation...

Testing laboratories, its function in ensuring industrial safety; Los laboratorios de ensayo, su funcion en el aseguramiento de la seguridad industrial

Energy Technology Data Exchange (ETDEWEB)

Sanchez Fernandez, M.

2015-07-01

This article discusses and justifies the development of industrial laboratories (testing and calibration) in Spain, since its embryo, its creation and development, to the present day. Likewise, presents its interrelation with other agents, as well as the legislative and technical framework is application along to the years. Within this development of the sector, highlights the period of the conformity assessment, and consequently its relationship with Industrial safety. Finally, describes the organizational situation of the sector both nationally and internationally. (Author)

The U.S. commercial air tour industry: a review of aviation safety concerns.

Science.gov (United States)

Ballard, Sarah-Blythe

2014-02-01

The U.S. Title 14 Code of Federal Regulations defines commercial air tours as "flight[s] conducted for compensation or hire in an airplane or helicopter where a purpose of the flight is sightseeing." The incidence of air tour crashes in the United States is disproportionately high relative to similar commercial aviation operations, and air tours operating under Part 91 governance crash significantly more than those governed by Part 135. This paper reviews the government and industry response to four specific areas of air tour safety concern: surveillance of flight operations, pilot factors, regulatory standardization, and maintenance quality assurance. It concludes that the government and industry have successfully addressed many of these tenet issues, most notably by: advancing the operations surveillance infrastructure through implementation of en route, ground-based, and technological surveillance methods; developing Aeronautical Decision Making and cue-based training programs for air tour pilots; consolidating federal air tour regulations under Part 136; and developing public-private partnerships for raising maintenance operating standards and improving quality assurance programs. However, opportunities remain to improve air tour safety by: increasing the number and efficiency of flight surveillance programs; addressing pilot fatigue with more restrictive flight hour limitations for air tour pilots; ensuring widespread uptake of maintenance quality assurance programs, especially among high-risk operators not currently affiliated with private air tour safety programs; and eliminating the 25-mile exception allowing Part 91 operators to conduct commercial air tours without the safety oversight required of Part 135 operators.

A hierarchical factor analysis of a safety culture survey.

Science.gov (United States)

Frazier, Christopher B; Ludwig, Timothy D; Whitaker, Brian; Roberts, D Steve

2013-06-01

Recent reviews of safety culture measures have revealed a host of potential factors that could make up a safety culture (Flin, Mearns, O'Connor, & Bryden, 2000; Guldenmund, 2000). However, there is still little consensus regarding what the core factors of safety culture are. The purpose of the current research was to determine the core factors, as well as the structure of those factors that make up a safety culture, and establish which factors add meaningful value by factor analyzing a widely used safety culture survey. A 92-item survey was constructed by subject matter experts and was administered to 25,574 workers across five multi-national organizations in five different industries. Exploratory and hierarchical confirmatory factor analyses were conducted revealing four second-order factors of a Safety Culture consisting of Management Concern, Personal Responsibility for Safety, Peer Support for Safety, and Safety Management Systems. Additionally, a total of 12 first-order factors were found: three on Management Concern, three on Personal Responsibility, two on Peer Support, and four on Safety Management Systems. The resulting safety culture model addresses gaps in the literature by indentifying the core constructs which make up a safety culture. This clarification of the major factors emerging in the measurement of safety cultures should impact the industry through a more accurate description, measurement, and tracking of safety cultures to reduce loss due to injury. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Development of Information Support of the Automated System for Monitoring the State of the Gas Transportation System’s Industrial Safety

Directory of Open Access Journals (Sweden)

Ruslan Skrynkovskyy

2017-08-01

Full Text Available The purpose of the article is to developing the information security of the automated system for monitoring the state of industrial safety of the gas transportation system within the framework of the safety management system, which will enable timely and objective detection of adverse accident hazards (hazardous events and taking the necessary specific measures to eliminate them and operate the gas transport system safely. It is proved that the basis of the information provision of the automated system for monitoring the state of the industrial safety of the gas transmission system is a methodology that includes the following basic procedures: identifying hazards; qualitative and quantitative assessment of emergencies; establishing of unacceptable (unallowable risks and their introduction to the information base (register of unacceptable risks of objects of the gas transportation system; comprehensive assessment and certification of the state of industrial safety of objects of the gas transportation system; identification of effective, productive (efficient risk management measures. The prospect of further research in this area is the development and implementation of an automated system for monitoring the state of industrial safety of the objects of the gas transmission system based on the results of the research (of the submitted information provision.

Culture, communication and safety: lessons from the airline industry.

Science.gov (United States)

d'Agincourt-Canning, Lori G; Kissoon, Niranjan; Singal, Mona; Pitfield, Alexander F

2011-06-01

Communication is a critical component of effective teamwork and both are essential elements in providing high quality of care to patients. Yet, communication is not an innate skill but a process influenced by internal (personal/cultural values) as well as external (professional roles and hierarchies) factors. To provide illustrative cases, themes and tools for improving communication. Literature review and consensus opinion based on extensive experience. Professional autonomy should be de-emphasized. Tools such as SBAR and simulation are important in communication and teamwork. Tools designed to improve communication and safety in the aviation industry may have applicability to the pediatric intensive care unit.

Safety culture in nuclear industry

International Nuclear Information System (INIS)

Sundararajan, A.R.

1998-01-01

This paper after defining the term safety culture outlines the requirements at various levels of the plant management to ensure that safety culture pervades all activities related to the plant. Techniques are also indicated which can be used to assess the effectiveness of safety culture

Regulation of occupational health and safety in the semiconductor industry: enforcement problems and solutions.

Science.gov (United States)

Watterson, Andrew

2006-01-01

Reports of high incidences of occupational illnesses in the semiconductor industry should have triggered global investigations and rigorous inspection of the industry. Yet semiconductor plants remain essentially unregulated. Health and safety standards are inadequate and enforcement is lax. Roles for stakeholders in laying down good practice, monitoring, and regulating are proposed, and obstacles are described. Effective regulation has advantages for the industry as well as workers. Conditions for best practice include education at all levels, protection and support for labor inspectors, government commitment to enforcing laws, recognition of the right of workers to organize, and recognition of their rights.

New vision of the control organisms in industrial safety and maintenance, based approach to new pressure equipment

International Nuclear Information System (INIS)

Bernardez Garcia, A.

2010-01-01

Control agencies are companies dedicated to the verification of compliance with the safety of products and facilities as administrative regulation in industrial safety through certification activities, testing, inspection or audit.Changes have been made that will stimulate the increase of companies engaged in this sector.

Safety- and risk analysis activities in other areas than the nuclear industry

International Nuclear Information System (INIS)

Kozine, I.; Duijm, N.J.; Lauridsen, K.

2000-12-01

The report gives an overview of the legislation within the European Union in the field of major industrial hazards and gives examples of decision criteria applied in a number of European countries when judging the acceptability of an activity. Furthermore, the report mentions a few methods used in the analysis of the safety of chemical installations. (au)

Workshop on Indian Chemical Industry: perspectives on safety, cleaner production and environment production

NARCIS (Netherlands)

Ham, J.M.

1996-01-01

A Workshop on "Indian Chemical Industry: Perspectives on Safety, Cleaner Production and Environmental Protection" was held on 3, 4 and 5 January 1996, in Bombay, India. The main objective of the workshop, which was organised jointly by the Government of India, UNIDO/UNDP and the Indian Chemical

77 FR 63801 - Aqua-Leisure Industries, Inc., Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2012-10-17

... filed a Supplemental Full Report in which it reported that the Firm had received at least 28 consumer... millions of units sold, Aqua Leisure received only 6 consumer reports (including suspect reports) in 2004... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 13-C0001] Aqua-Leisure Industries, Inc...

Safety Culture Enhancement Project. Final Report. A Field Study on Approaches to Enhancement of Safety Culture

Energy Technology Data Exchange (ETDEWEB)

Lowe, Andrew; Hayward, Brent (Dedale Asia Pacific, Albert Park VIC 3206 (Australia))

2006-08-15

results of the Safety Culture Perceptions Questionnaire conducted with site managers to access their opinions about the adequacy of the local safety culture; - a framework of safety-related competencies for managers, representing desirable actions for leading and promoting a positive safety culture; - results of an evaluation survey completed by participants at the conclusion of the Management Workshops to assess the utility of this activity. Section 4 of the report, Recommendations for Future Action, highlights nine proposed activities that could be undertaken to build on the outcomes from this project, to support the enhancement of safety culture within the Swedish nuclear industry in the longer term. Specifically, these recommendations propose actions to: 1. Introduce formal processes to ensure the ongoing development of safety related competencies amongst industry managers. 2. Strengthen the resources, contribution, value and profile of Man Technology Organisation (MTO) expertise within nuclear industry sites, in order to promote a better understanding of human performance issues, enhance error management and accident prevention capabilities. 3. Identify ways to embed existing positive safety culture attributes, in an environment of considerable workforce changes resulting from increasing use of contractors and (expected) retirements amongst an ageing industry employee population. 4. Standardise and improve aspects of incident and accident investigation processes and analysis methodologies currently used, to improve information sharing and optimise learning. 5. Implement harmonised MTO / human factors awareness training programs at appropriate levels for all nuclear industry personnel. 6. Formalise the application of applied teamwork training (as per the principles of Crew Resource Management training in aviation) for NPP Control Room Operators, Maintenance workers and other employees working in safety-critical teams. 7. Increase the use of simulation training to

Examination on the actual situation of safety measures for the gas used in semiconductor industry of U. S. A. Amerika no handotai kogyoyo gas no anzen taisaku no jitsujo wo mite

Energy Technology Data Exchange (ETDEWEB)

Horiguchi, S [National Inst. of Materials and Chemical Research, Tsukuba (Japan)

1993-06-15

In compliance with the request of the Compressed Gas Safety Association of Japan, the visits to the Department of Transportation (DOT), the Occupational Safety and Health Administration, Department of Labor (OSHA), which are the apparatus of government, the Compressed Gas Association (CGA), the makers of gas used in the semiconductor industry, the makers of cylinder cabinet, and the semiconductor manufacturing factories run by Japanese were made by the present authors in order to examine the actual situations of the safety measure to the gas used in semiconductor industry of U.S.A. In this paper, the viewpoints as well as the actual situation relating to the safety measure to the compressed gas in said visited apparatus and enterprises are introduced. Especially, a number of points which should be referred to are indicated that recently in America, the control of the dangerous materials are regulated rigorously due to the environmental problems, and additionally the files of material safety data sheet based on Hazard communication of OSHA are ranged in the passageways for being read freely, the certain safety educations are given to the employees in offices and the visiting traders or marketers concerned as the duty. 1 fig., 2 tabs.

EXPLORATORY STUDY OF OBSTACLES IN SAFETY CULTURE DEVELOPMENT IN THE CONSTRUCTION INDUSTRY: A GROUNDED THEORY APPROACH

Directory of Open Access Journals (Sweden)

Bonaventure H.W. Hadikusumo

2010-06-01

Full Text Available The aim of this paper is to analyse the obstacles that prevent the development of a safety culture in Thailand’s large construction industry from various managerial points of view. Qualitative research methods were used by performing a series of semi-structured interviews of eight case studies selected from six prominent construction firms to investigate the obstacles they face. Glaser’s keyword coding from Grounded Theory was used to reduce the information load after the interviews. Our findings revealed that the factors influencing the successful development of a safety culture in the construction industry are the workers, the characteristics of construction, the subcontractors, the supervisors, and external factors. Based on the frequency analysis, the main obstacles in developing a safety culture result from problems related to the workers themselves. The three most frequently discussed problems are unskilled workers, unsafe worker habits, and high worker turnover. Our results also suggest that managers should encourage engagement from their workers to optimise the successful implementation of safety programs and their long-term improvement.

Defining safety culture and the nexus between safety goals and safety culture. 1. An Investigation Study on Practical Points of Safety Management

International Nuclear Information System (INIS)

Hasegawa, Naoko; Takano, Kenichi; Hirose, Ayako

2001-01-01

In a report after the Chernobyl accident, the International Atomic Energy Agency indicated the definition and the importance of safety culture and the ideal organizational state where safety culture pervades. However, the report did not mention practical approaches to enhance safety culture. In Japan, although there had been investigations that clarified the consciousness of employees and the organizational climate in the nuclear power and railway industries, organizational factors that clarified the level of organization safety and practical methods that spread safety culture in an organization had not been studied. The Central Research Institute of the Electric Power Industry conducted surveys of organizational culture for the construction, chemical, and manufacturing industries. The aim of our study was to clarify the organizational factors that influence safety in an organization expressed in employee safety consciousness, commitment to safety activities, rate of accidents, etc. If these areas were clarified, the level of organization safety might be evaluated, and practical ways could be suggested to enhance the safety culture. Consequently, a series of investigations was conducted to clarify relationships among organizational climate, employee consciousness, safety management and activities, and rate of accidents. The questionnaire surveys were conducted in 1998-1999. The subjects were (a) managers of the safety management sections in the head offices of the construction, chemical, and manufacturing industries; (b) responsible persons in factories of the chemical and manufacturing industries; and (c) general workers in factories of the chemical and manufacturing industries. The number of collected data was (a) managers in the head office: 48 from the construction industry and 58 from the chemical and manufacturing industries, (b) responsible persons in factories: 567, and (c) general workers: from 29 factories. Items in the questionnaires were selected from

Findings of the inspection grading system on industrial radiography

International Nuclear Information System (INIS)

Gloria Doloressa

2011-01-01

The use of industrial radiography techniques evolve rapidly and widely. Various jobs in industry require the examination of welding techniques / connecting pipes and metal construction. The use of industrial radiography is one type of utilization of nuclear energy must get control so that its use does not cause harmful impacts to worker safety, community, and environment. Regulations is done through inspections, in order to supervise the observance of the terms in the licensing and legislation in the field of nuclear safety. The main purpose of inspection is to ensure the utilization of radiation sources of radiation have been used with. Findings of the inspection is a decline in the performance of licensees in meeting safety requirements. The Grading System to the findings of the inspection needs to be done to improve the effectiveness and efficiency of inspection, and it is expected that the company can improve the management of radiation safety. (author)

Evaluation of the Radiological Safety of 192 Ir Apparatus for Industrial Gamma Radiography

International Nuclear Information System (INIS)

Aquino, J. O.; Silva, F. C. A. da; Ramalho, A. T.; Godoy, J. M. O.

2004-01-01

The majority of the 192Ir apparatus for industrial gamma radiography have been in usage in Brazil for more than 20 years. They are portable, and almost all operate according to category II. The main objective of this work was to assess the radiological safety of the 11 models of 192Ir apparatus most used in Brazil. The 11 models of 192Ir apparatus were studied with respect to compliance with the main safety requirements of three editions of international Standards ISO 3999. Six models were already manufactured incorporating the safety devices specified in the first edition of ISO 3999, issued in 1977. However, five models were not. The validity of their type B certificates for transport packages was also evaluated. (Author) 8 refs

Squale: evaluation criteria of functioning safety

International Nuclear Information System (INIS)

Deswarte, Y.; Kaaniche, M.; Benoit, P.

1998-05-01

The SQUALE (security, safety and quality evaluation for dependable systems) project is part of the ACTS (advanced communications, technologies and services) European program. Its aim is to develop confidence evaluation criteria to test the functioning safety of systems. All industrial sectors that use critical applications (nuclear, railway, aerospace..) are concerned. SQUALE evaluation criteria differ from the classical evaluation methods: they are independent of the application domains and industrial sectors, they take into account the overall functioning safety attributes, and they can progressively change according to the level of severity required. In order to validate the approach and to refine the criteria, a first experiment is in progress with the METEOR automatic underground railway and another will be carried out on a telecommunication system developed by Bouygues company. (J.S.)

Using standardized insulin orders to improve patient safety in a tertiary care centre.

Science.gov (United States)

Doyle, Mary-Anne; Brez, Sharon; Sicoli, Silvana; De Sousa, Filomena; Keely, Erin; Malcom, Janine C

2014-04-01

To standardize insulin prescribing practices for inpatients, improve management of hypoglycemia, reduce reliance on sliding scales, increase use of basal-bolus insulin and improve patient safety. Patients with diabetes were admitted to 2 pilot inpatient units followed by corporate spread to all insulin-treated patients on noncritical care units in a Canadian tertiary care multicampus teaching hospital. Standardized preprinted insulin and hypoglycemia management orders, decision support tools and multidisciplinary education strategies were developed, tested and implemented by way of the Model for Improvement and The Ottawa Model for Research Process. Clinical and balance measures were evaluated through statistical process control. Patient safety was improved through a reduction in hypoglycemia and decreased dependence on correctional scales. Utilization of the preprinted orders approached the target of 70% at the end of the test period and was sustained at 89% corporately 3 years post-implementation. The implementation of a standardized, preprinted insulin order set facilitates best practices for insulin therapy, improves patient safety and is highly supported by treating practitioners. The utilization of formal quality-improvement methodology promoted efficiency, enhanced sustainability, increased support among clinicians and senior administrators, and was effective in instituting sustained practice change in a complex care centre. Crown Copyright © 2014. Published by Elsevier Inc. All rights reserved.

A Microbial Assessment Scheme to measure microbial performance of Food Safety Management Systems

NARCIS (Netherlands)

Jacxsens, L.; Kussaga, J.; Luning, P.A.; Spiegel, van der M.; Devlieghere, F.; Uyttendaele, M.

2009-01-01

A Food Safety Management System (FSMS) implemented in a food processing industry is based on Good Hygienic Practices (GHP), Hazard Analysis Critical Control Point (HACCP) principles and should address both food safety control and assurance activities in order to guarantee food safety. One of the

Managing for safety at nuclear installations

International Nuclear Information System (INIS)

1996-01-01

This publication, by the Health and Safety Executive's (HSE's) Nuclear Safety Division (NSD), provides a statement of the criteria the Nuclear Installations Inspectorate (NII) uses to judge the adequacy of any proposed or existing system for managing a nuclear installation in so far as it affects safety. These criteria have been developed from the basic HSE model, described in the publication Successful health and safety management that applies to industry generally, in order to meet the additional needs for managing nuclear safety. In addition, the publication identifies earlier studies upon which this work was based together with the key management activities and outputs. (Author)

Spreading the word of the concept 'inherent safety' in a general industrial setting in the Dutch province of Zeeland

NARCIS (Netherlands)

Jongen, M.J.M.; Dijkman, A.; Zwanikken, S.; Zwetsloot, G.I.J.M.; Gort, J.

2007-01-01

Recent accidents in The Netherlands in different kinds of industries, like fire works storage, catering and energy industry, triggered the Dutch government to start a national program to enhance the enforcement of industrial safety at the regional and municipal level. Stimulated by this program the

Toward a sustainable cement industry in 2020 : improvement of the environmental, health & safety performance

NARCIS (Netherlands)

2001-01-01

This background document concentrates on technical and managerial aspects of Environmental, Health & Safety Performance (EHS) control in the cement industry. It gives an overview of options for improvement toward a sustainable cement production in 2020. Energy consumption and use of alternative

Modelo para a gestão da cultura de segurança do trabalho em organizações industriais Model for safety culture management in industrial organizations

Directory of Open Access Journals (Sweden)

Anastácio Pinto Gonçalves Filho

2012-01-01

Full Text Available A pesquisa apresentada neste artigo teve o objetivo de desenvolver e validar um modelo para identificar o estágio de maturidade da cultura de segurança do trabalho em organizações industriais. Com a finalidade de validá-lo, o modelo desenvolvido foi aplicado em 23 empresas químicas e petroquímicas do Polo Industrial de Camaçari, Bahia, Brasil. Foram utilizados os seguintes métodos para validação do modelo desenvolvido: 1 entrevistas individuais, 2 evidências documentais, 3 entrevistas com grupo de gerentes e 4 aplicação do modelo em outro ramo de atividade diferente do ramo químico e petroquímico. O principal resultado obtido foi que o modelo desenvolvido foi validado e pode ser utilizado para identificar o estágio de maturidade da cultura de segurança em organizações industriais.The research presented in this article had the objective to develop and validate a model to identify safety culture maturity in industrial organizations. In order to validate it, the developed model was applied in 23 chemical and petrochemical companies in Camaçari, Bahia, Brazil. The following methods were used: 1. individual interviews; 2. interview with groups of safety managers; 3. documental evidence and 4. application of the model in another industrial activity. Results demonstrated that the developed model was validated and it is suitable to identify safety culture maturity in industrial organizations.

Advancement of Tools Supporting Improvement of Work Safety in Selected Industrial Company

Science.gov (United States)

Gembalska-Kwiecień, Anna

2018-03-01

In the presented article, the advancement of tools to improve the safety of work in the researched industrial company was taken into consideration. Attention was paid to the skillful analysis of the working environment, which includes the available technologies, work organization and human capital. These factors determine the development of the best prevention activities to minimize the number of accidents.

The need for novel model order reduction techniques in the electronics industry (Chapter 1)

NARCIS (Netherlands)

Schilders, W.H.A.; Benner, P.; Hinze, M.; Maten, ter E.J.W.

2011-01-01

In this paper, we discuss the present and future needs of the electronics industry with regard to model order reduction. The industry has always been one of the main motivating fields for the development of MOR techniques, and continues to play this role. We discuss the search for provably passive

Safety Culture Enhancement Project. Final Report. A Field Study on Approaches to Enhancement of Safety Culture

International Nuclear Information System (INIS)

Lowe, Andrew; Hayward, Brent

2006-08-01

Safety Culture Perceptions Questionnaire conducted with site managers to access their opinions about the adequacy of the local safety culture; - a framework of safety-related competencies for managers, representing desirable actions for leading and promoting a positive safety culture; - results of an evaluation survey completed by participants at the conclusion of the Management Workshops to assess the utility of this activity. Section 4 of the report, Recommendations for Future Action, highlights nine proposed activities that could be undertaken to build on the outcomes from this project, to support the enhancement of safety culture within the Swedish nuclear industry in the longer term. Specifically, these recommendations propose actions to: 1. Introduce formal processes to ensure the ongoing development of safety related competencies amongst industry managers. 2. Strengthen the resources, contribution, value and profile of Man Technology Organisation (MTO) expertise within nuclear industry sites, in order to promote a better understanding of human performance issues, enhance error management and accident prevention capabilities. 3. Identify ways to embed existing positive safety culture attributes, in an environment of considerable workforce changes resulting from increasing use of contractors and (expected) retirements amongst an ageing industry employee population. 4. Standardise and improve aspects of incident and accident investigation processes and analysis methodologies currently used, to improve information sharing and optimise learning. 5. Implement harmonised MTO / human factors awareness training programs at appropriate levels for all nuclear industry personnel. 6. Formalise the application of applied teamwork training (as per the principles of Crew Resource Management training in aviation) for NPP Control Room Operators, Maintenance workers and other employees working in safety-critical teams. 7. Increase the use of simulation training to enhance non

Safety culture: a comparative study of space, nuclear and oil-gas sectors

International Nuclear Information System (INIS)

Morais, David; Assis, Altair Souza de

2008-01-01

Full text:We access in this paper the safety culture methodology adopted by three different industrial sectors: Nuclear, space/aeronautics and oil-gas, in Brazil. In this work, It is evaluated the planning, training, personal monitoring and the interaction between the technical personal, such as engineers and physicists, with human ones, such social workers and physiologists, key factor to understand the efficacy of the local safety culture pattern. The research is made through the analysis of the relevant manuals and interviewing the safety, human areas personal, and regulatory managers, concerned with/related to safety/working with safety culture at the specific industrial sector. It is compared the efficacies and the official regulatory vision on the issue, for the different sectors, in order to detect confluences and divergences and, so, to propose a model that better treat the safety culture as a global industrial value. (author)

Transactions of the twenty-fifth water reactor safety information meeting

Energy Technology Data Exchange (ETDEWEB)

Monteleone, S. [comp.

1997-09-01

This report contains summaries of papers on reactor safety research to be presented at the 25th Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel in Bethesda, Maryland, October 20--22, 1997. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, US NRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the nuclear industry, and from foreign governments and industry are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion of information exchanged during the course of the meeting, and are given in order of their presentation in each session.

Transactions of the twenty-fifth water reactor safety information meeting

International Nuclear Information System (INIS)

Monteleone, S.

1997-09-01

This report contains summaries of papers on reactor safety research to be presented at the 25th Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel in Bethesda, Maryland, October 20--22, 1997. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, US NRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the nuclear industry, and from foreign governments and industry are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion of information exchanged during the course of the meeting, and are given in order of their presentation in each session

INDUSTRIAL TRAINING AND TRAINING IN SAFETY, A STATEMENT BY THE CENTRAL TRAINING COUNCIL. MEMORANDUM NUMBER 2.

Science.gov (United States)

Ministry of Labour, London (England).

THE TRAINING OF WORKERS IN SAFETY AND IN SAFE METHODS OF WORK IS AN ESSENTIAL PART OF ACCIDENT PREVENTION. IT IS A MANAGEMENT RESPONSIBILITY TO DO THIS, AND, TO BE EFFECTIVE, MANAGEMENT ITSELF MUST BE CONVINCED OF THE NEED FOR SAFETY TRAINING. IT SHOULD BE CARRIED OUT AS PART OF THE NORMAL TRAINING WHICH ALL ENTRANTS TO INDUSTRY RECEIVE. THE…

Occupational safety issues in residential construction surveyed in Wisconsin, United States.

Science.gov (United States)

Choi, Sang D; Carlson, Kathryn

2014-01-01

Residential construction is a high-risk industry in the U.S. due to the exposure to work-related safety hazards and fall injuries. This study aimed to examine the safety training and safe work practices of construction workers within the small residential construction industry. In order to achieve the study objectives, a survey was designed and sent to approximately 200 Wisconsin based residential construction contractors. About one third of the respondents stated that they did not have any form of safety programs. The study indicated that the most common types of work-related injuries in residential construction were slips/trips/falls and cuts/lacerations. The survey findings also suggested that the residential construction contractors needed to increase the utilization of fall protection safety equipment. Further education and subject matter expert training could provide benefits to improve occupational safety and health of the small business workforce in the residential construction industry.

Design for safety: theoretical framework of the safety aspect of BIM system to determine the safety index

Directory of Open Access Journals (Sweden)

Ai Lin Evelyn Teo

2016-12-01

Full Text Available Despite the safety improvement drive that has been implemented in the construction industry in Singapore for many years, the industry continues to report the highest number of workplace fatalities, compared to other industries. The purpose of this paper is to discuss the theoretical framework of the safety aspect of a proposed BIM System to determine a Safety Index. An online questionnaire survey was conducted to ascertain the current workplace safety and health situation in the construction industry and explore how BIM can be used to improve safety performance in the industry. A safety hazard library was developed based on the main contributors to fatal accidents in the construction industry, determined from the formal records and existing literature, and a series of discussions with representatives from the Workplace Safety and Health Institute (WSH Institute in Singapore. The results from the survey suggested that the majority of the firms have implemented the necessary policies, programmes and procedures on Workplace Safety and Health (WSH practices. However, BIM is still not widely applied or explored beyond the mandatory requirement that building plans should be submitted to the authorities for approval in BIM format. This paper presents a discussion of the safety aspect of the Intelligent Productivity and Safety System (IPASS developed in the study. IPASS is an intelligent system incorporating the buildable design concept, theory on the detection, prevention and control of hazards, and the Construction Safety Audit Scoring System (ConSASS. The system is based on the premise that safety should be considered at the design stage, and BIM can be an effective tool to facilitate the efforts to enhance safety performance. IPASS allows users to analyse and monitor key aspects of the safety performance of the project before the project starts and as the project progresses.

Beyond Texas City: the state of process safety in the unionized U.S. oil refining industry.

Science.gov (United States)

McQuiston, Thomas H; Lippin, Tobi Mae; Bradley-Bull, Kristin; Anderson, Joseph; Beach, Josie; Beevers, Gary; Frederick, Randy J; Frederick, James; Greene, Tammy; Hoffman, Thomas; Lefton, James; Nibarger, Kim; Renner, Paul; Ricks, Brian; Seymour, Thomas; Taylor, Ren; Wright, Mike

2009-01-01

The March 2005 British Petroleum (BP) Texas City Refinery disaster provided a stimulus to examine the state of process safety in the U.S. refining industry. Participatory action researchers conducted a nation-wide mail-back survey of United Steelworkers local unions and collected data from 51 unionized refineries. The study examined the prevalence of highly hazardous conditions key to the Texas City disaster, refinery actions to address those conditions, emergency preparedness and response, process safety systems, and worker training. Findings indicate that the key highly hazardous conditions were pervasive and often resulted in incidents or near-misses. Respondents reported worker training was insufficient and less than a third characterized their refineries as very prepared to respond safely to a hazardous materials emergency. The authors conclude that the potential for future disasters plagues the refining industry. In response, they call for effective proactive OSHA regulation and outline ten urgent and critical actions to improve refinery process safety.

Safety indicators as a tool for operational safety evaluation of nuclear power plants

International Nuclear Information System (INIS)

Araujo, Jefferson Borges; Melo, Paulo Fernando Ferreira Frutuoso e; Schirru, Roberto

2009-01-01

Performance indicators have found a wide use in the conventional and nuclear industries. For the conventional industry, the goal is to optimize production, reducing loss of time with accidents, human error and equipment downtimes. In the nuclear industry, nuclear safety is an additional goal. This paper presents a general methodology to the establishment, selection and use of safety indicators for a two loop PWR plant, as Angra 1. The use of performance indicators is not new. The NRC has its own methodology and the IAEA presents methodology suggestions, but there is no detailed documentation about indicators selection, criteria and bases used. Additionally, only the NRC methodology performs a limited integrated evaluation. The study performed identifies areas considered critical for the plant operational safety. For each of these areas, strategic sub-areas are defined. For each strategic sub-area, specific safety indicators are defined. These proposed Safety Indicators are based on the contribution to risk considering a quantitative risk analysis. For each safety indicator, a goal, a bounded interval and proper bases are developed, to allow for a clear and comprehensive individual behavior evaluation. On the establishment of the intervals and boundaries, a probabilistic safety study, operational experience, international and national standards and technical specifications were used. Additionally, an integrated evaluation of the indicators, using expert systems, was done to obtain an overview of the plant general safety. This evaluation uses well-defined and clear rules and weights for each indicator to be considered. These rules were implemented by means of a computational language, on a friendly interface, so that it is possible to obtain a quick response about operational safety. This methodology can be used to identify situations where the plant safety is challenged, by giving a general overview of the plant operational condition. Additionally, this study can

A Glance on the Safety Culture in Industrial Gamma Radiography in the Philippines: Regulatory Body Perspective

International Nuclear Information System (INIS)

Borras, A.M.

2016-01-01

The current version of the Code of PNRI Regulations (CPR) Part 11 was published in the Official Gazette on 2010. It is just a year ahead of the publication of the IAEA Specific Safety Guide No. 11. In view of these, radiation safety culture in the practice of industrial gamma radiography was not yet fully introduced in the said national regulations in the country. However, it should not be a reflection that the radiation workers in the country specifically in the said field of practice do not exercise positive safety culture. The Nuclear Regulatory Division (NRD)—regulatory arm, although not yet separated from the Philippine Nuclear Research Institute (PNRI0) as mandated by law — the promotional organization, has a well established and systemic regulatory infrastructure. It is attested by several studies and reports, among others. This study aims to assess the status of the existing safety culture in the conduct of industrial gamma radiography in the country through personnel perception survey of the radiation workers, i.e., managers, radiation safety officers, radiographers and radiographer’s assistants, based on the IAEA five characteristics of safety culture stipulated in the IAEA Safety Guide No. GS-G-3.5, “The Management System for Nuclear Installations”. It is assessed by the NRD of the PNRI. Also, the study determines the existence of safety culture as to the perspective of NRD through observations on the conduct of radiographic operations and walk-through of the facility while using the three-level Schein Model, i.e., “artefacts”, “espoused values” and “basic assumptions” and document reviews, among others

Voluntary Safety Management System in the Manufacturing Industry – To What Extent does OHSAS 18001 Certification Help?

Directory of Open Access Journals (Sweden)

Paas Õnnela

2015-11-01

Full Text Available Occupational risk prevention can be managed in several ways. Voluntary safety management standard OHSAS 18001 is a tool, which is considered to give contribution in effective risk management in the manufacturing industry. The current paper examines the benefits of OHSAS 18001 based on the statistical analysis. MISHA method is used for safety audit in 16 Estonian enterprises. The results demonstrate the objectives why companies implement or are willing to implement OHSAS 18001, bring out differences in safety activities for 3 types of companies and determine correlations among different safety activity areas. The information is valuable for enterprises that are willing to improve their safety activities via a voluntary safety management system.

LABOUR PROTECTION AND INDUSTRIAL SAFETY IN UKRAINE: PROBLEMS OF TRANSITION PERIOD AND PERSPECTIVE WAYS OF DEVELOPMENT

Directory of Open Access Journals (Sweden)

A. P. BOCHKOVSKY

2016-12-01

Full Text Available Based on comparative analysis of the industrial accident causes in Ukraine and EU countries this article establishes that the main accident reasons are organizational ones (50 to 70% of the total number of cases, however such indicators as the registered in Ukraine fatal cases frequency coefficient (per 1 thousand of employees and the fatal accidents-total accidents number ratio are greater than the similar indicators in Europe by about 2- and 100-fold, respectively. It is noted that the issues of improving the work safety in Ukraine towards the association with the European Union should be considered in the context of two main planes, which are associated with changes in the legislative and educational systems. Within this article, the authors analyse the main inter-sectoral and sectoral regulatory legal acts on labour protection, in particular in the field of providing for fire, explosion and electrical safety, and relevant documents relating to the creation and maintenance of a comfortable environment at work. Based on the conducted analysis, the problems of adapting the national legislation in the field of labour protection and industrial safety to the legal framework of EU, the problems concerning the unsystematic character and selective approach to the implementation of appropriate changes, and potential hazards that can occur at all stages of the life cycle of technical systems in the event of their introduction are determined. The main differences in the systematic approach to the professional training of students in higher educational institutions (HEI of Ukraine and EU countries (Poland, for example in the field of labour protection and industrial safety are singled out. It is noted that in the Republic of Poland numbering the population correlative with Ukraine the quantity of special educational institutions preparing specialists in the field of labour protection in relation to the total number of higher educational establishment is

Computer systems and nuclear industry

International Nuclear Information System (INIS)

Nkaoua, Th.; Poizat, F.; Augueres, M.J.

1999-01-01

This article deals with computer systems in nuclear industry. In most nuclear facilities it is necessary to handle a great deal of data and of actions in order to help plant operator to drive, to control physical processes and to assure the safety. The designing of reactors requires reliable computer codes able to simulate neutronic or mechanical or thermo-hydraulic behaviours. Calculations and simulations play an important role in safety analysis. In each of these domains, computer systems have progressively appeared as efficient tools to challenge and master complexity. (A.C.)

Safety in construction?

NARCIS (Netherlands)

Swuste, P.H.J.J.

2013-01-01

The available literature on Construction Safety is not very optimistic about the chances of evidence-based safety in the construction industry exerting a positive influence. Many articles indicate that the structures and processes that are designed to ensure safety in the industry are poor. Safety

Execution of the Occupational Safety and Health Act (1994 in the Construction Industry from Contractors’ Point of View

Directory of Open Access Journals (Sweden)

Awang H.

2014-01-01

Full Text Available Construction is one of the highest contributing industries to occupational accidents by sector in Malaysia. Statistics have been drawn from year to year that show an increasing number of cases of accidents by industry sector. While it is impossible to completely eliminate all accidents, with a proper and effective safety and health policy or rules set by top management, especially contractors, the rate of accidents on construction sites can be reduced. The main objective of this study is to analyse the degree of application of the Occupational Safety and Health Act 1994 (OSHA 1994 in the construction industry and to identify the contributing factors leading to a lack of execution of OSHA 1994 on construction sites with a primary focus on contractors’ point of view. Five on-going construction projects in Perak were selected as case studies and site inspections were conducted. The results showed that none of the contractors have fully implemented the rules and regulations provided by the government. Within this report, some recommendations are made towards enhancing the safety and health issues on construction sites.

Addressing safety issues through a joint industry programme; Traiter des problemes de securite a travers un programme industriel commun

Energy Technology Data Exchange (ETDEWEB)

Pool, G.; Williams, T.P. [BG Technology (United Kingdom); Jones, A.M. [Health and Safety Executive (United Kingdom)

2000-07-01

In an increasingly fragmented gas market, the focus for national gas safety may not rest with one major utility or gas supplier but may be spread across many companies. There will also be many new organisations in a liberalized gas industry with varying views on the needs and benefits of safety related technology development but all agree there is a need to ensure that the good safety record of gas as a domestic fuel is maintained. The number of carbon monoxide (CO) incidents is not decreasing significantly despite an increased awareness of the problem. As a consequence, a two-year joint industry programme addressing issues related to carbon monoxide has been established, co-ordinated by BG Technology and supported by gas organisations, government agencies, manufacturers and suppliers across Europe and the World. The 2-year 2 pound million programme has been constructed as twelve separate projects addressing issues such as the reporting and analysis of domestic incidents, improved service or installation practice, CO alarm reliability and information dissemination. The paper gives results and achievements of the programme, through new techniques, standards, procedures or equipment and demonstrates how the gas industry can work together to meet common safety objectives. (authors)

Role of human factor in safety assurance in the nuclear industry

International Nuclear Information System (INIS)

Agapov, A.M.; Mikhajlov, M.V.; Novikov, G.A.

2010-01-01

The authors discuss the issues of human resource activities in the Rosatom Corporation that aim to achieve and maintain the required levels of safety culture and qualification of personnel involved in the operations of nuclear energy sites. These activities are supported by the appropriate resources, organisational management structure and quality control system, legislation, regulations and methodological support. It is emphasized that systematic and versatile HR-related activities in the nuclear industry represent one of the key areas of production operations that assure safety and reliability of nuclear sites at all stages of their life cycle. Especially important is the assurance of high professional level of nuclear regulators. They believe that it would appear sensible, in addition to the existing system of training, to engage the mechanisms of rotation of personnel from utility organisations to regulatory authorities [ru

A discussion of occupational health and safety management for the catering industry in China.

Science.gov (United States)

Qiang, Chen; Chow, Wan Ki

2007-01-01

The catering industry is developing rapidly in China. Statistics in 2002 indicated that there were over 3.5 million dining places in China, hiring over 18 million people. However, the accident rate was high. Occupational health and safety (OHS) has to be watched more carefully. It is proposed to develop an OHS management system for the catering industry and to integrate it with an ongoing management system by referring to OHSAS 18001:1999. The first step is risk identification and evaluating the major factors concerned by referring to the codes in China, the list of occupational diseases, operation rules, requirements of the law, and records of past incidents. The technological aspect has to be considered in working out the safety strategies. This includes technical measures in accident prevention at the workplace. The kitchen is the main area to be focused on. Methods for hazard identification and risk assessment of dangerous factors in kitchens are proposed in this paper.

Safety and human factors impacts of introducing quality management into high-risk industries: A field study

International Nuclear Information System (INIS)

Chollet, M.G.; Normier, C.; Girault, M.; Tasset, D.

2002-01-01

The Institute for Radiological Protection and Nuclear Safety has undertaken a study for getting a better understanding, especially in terms of Safety and Human Factors, of the changes caused by the progressive deployment of the Quality Management in French high risk industries. This study is based on both theoretical elements from the human sciences and management and practical elements from the field, collected from interviews in large French industrial sites involved in integrating this management method. The results show frequent discrepancies between theory, which is very positive and production-oriented, and reality, which is more complex and subtle, ever looking for trade-offs between production requirements and safety constraints. Thus, each step forward announced in the literature may be matched by possible steps backward in terms of safety on the ground. Where, in theory, processes enable practices to be mastered, in practice they can reduce autonomy and fossilize know-how. Where theoretically continuous improvement stimulates and strengthens performances, in reality it can also generate stress and deadlock. Where theoretically personal commitment and collective responsibility work towards all-out performance, in reality they can also operate to conceal safety deviations and infringements. The assessment of Quality Management processes in the nuclear field will benefit from these results raised from theoretical review and confirmed by similar management changes. (author)

Nuclear Safety

International Nuclear Information System (INIS)

1978-09-01

In this short paper it has only been possible to deal in a rather general way with the standards of safety used in the UK nuclear industry. The record of the industry extending over at least twenty years is impressive and, indeed, unique. No other industry has been so painstaking in protection of its workers and in its avoidance of damage to the environment. Headings are: introduction; how a nuclear power station works; radiation and its effects (including reference to ICRP, the UK National Radiological Protection Board, and safety standards); typical radiation doses (natural radiation, therapy, nuclear power programme and other sources); safety of nuclear reactors - design; key questions (matters of concern which arise in the public mind); safety of operators; safety of people in the vicinity of a nuclear power station; safety of the general public; safety bodies. (U.K.)

Health, safety and environmental unit performance assessment model under uncertainty (case study: steel industry).

Science.gov (United States)

Shamaii, Azin; Omidvari, Manouchehr; Lotfi, Farhad Hosseinzadeh

2017-01-01

Performance assessment is a critical objective of management systems. As a result of the non-deterministic and qualitative nature of performance indicators, assessments are likely to be influenced by evaluators' personal judgments. Furthermore, in developing countries, performance assessments by the Health, Safety and Environment (HSE) department are based solely on the number of accidents. A questionnaire is used to conduct the study in one of the largest steel production companies in Iran. With respect to health, safety, and environment, the results revealed that control of disease, fire hazards, and air pollution are of paramount importance, with coefficients of 0.057, 0.062, and 0.054, respectively. Furthermore, health and environment indicators were found to be the most common causes of poor performance. Finally, it was shown that HSE management systems can affect the majority of performance safety indicators in the short run, whereas health and environment indicators require longer periods of time. The objective of this study is to present an HSE-MS unit performance assessment model in steel industries. Moreover, we seek to answer the following question: what are the factors that affect HSE unit system in the steel industry? Also, for each factor, the extent of impact on the performance of the HSE management system in the organization is determined.

Transactions of the nineteenth water reactor safety information meeting

International Nuclear Information System (INIS)

Weiss, A.J.

1991-10-01

This report contains summaries of papers on reactor safety research to be presented at the 19th Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel in Bethesda, Maryland, October 28--30, 1991. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, USNRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the Electric Power Research Institute (EPRI), the nuclear industry, and from the governments and industry in Europe and Japan are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion and information exchange during the course of the meeting, and are given in the order of their presentation in each session. The individual summaries have been cataloged separately

Transactions of the Twenty-First Water Reactor Safety Information Meeting

International Nuclear Information System (INIS)

Monteleone, S.

1993-10-01

This report contains summaries of papers on reactor safety research to be presented at the 21st Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel, Bethesda, Maryland, October 25--27, 1993. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, US NRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the Electric Power Research Institute (EPRI), the nuclear industry, and from foreign governments and industry are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion and information exchange during the course of the meeting and are given in the order of their presentation in each session

Transactions of the Twenty-First Water Reactor Safety Information Meeting

Energy Technology Data Exchange (ETDEWEB)

Monteleone, S. [comp.

1993-10-01

This report contains summaries of papers on reactor safety research to be presented at the 21st Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel, Bethesda, Maryland, October 25--27, 1993. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, US NRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the Electric Power Research Institute (EPRI), the nuclear industry, and from foreign governments and industry are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion and information exchange during the course of the meeting and are given in the order of their presentation in each session.

Transactions of the twenty-second water reactor safety information meeting

International Nuclear Information System (INIS)

1994-10-01

This report contains summaries of papers on reactor safety research to be presented at the 22nd Water Reactor Safety Information Meeting at the Bethesda Marriott Hotel, Bethesda, Maryland, October 24--26, 1994. The summaries briefly describe the programs and results of nuclear safety research sponsored by the Office of Nuclear Regulatory Research, US NRC. Summaries of invited papers concerning nuclear safety issues from US government laboratories, the electric utilities, the nuclear industry, and from foreign governments and industry are also included. The summaries have been compiled in one report to provide a basis for meaningful discussion and information exchange during the course of the meeting and are given in the order of their presentation in each session. Individual papers have been cataloged separately

Order of 2 May 1977 on a proficiency certificate for handling industrial radioscopy and radiography equipment

International Nuclear Information System (INIS)

1977-01-01

This Order lays down that any person handling industrial radioscopy or radiography equipment must obtain a proficiency certificate delivered by a regional jury made up of the regional director for labour and manpower or his representative, a physician competent for industrial medicine and specialized in radiation protection and an expert in industrial radiology. (NEA) [fr

Amendment of the Order of 2 November 1976 setting up an Institute for Protection and Nuclear Safety (29 October 1981)

International Nuclear Information System (INIS)

1981-01-01

The Institute for Protection and Nuclear Safety was set up within the Atomic Energy Commission by an Order of 2 November 1976 now amended by this new Order, which specifies that, in connection with nuclear safety, the Institute provides direct technical support to the Central Service for the Safety of Nuclear Installations. (NEA) [fr

Radiological protection procedures for industrial applications of computed radiography

International Nuclear Information System (INIS)

Aquino, Josilto Oliveira de

2009-03-01

Due to its very particular characteristics, industrial radiography is responsible for roughly half of the relevant accidents in nuclear industry, in developed as well as in developing countries, according to the International Atomic Energy Agency (IAEA). Thus, safety and radiological protection in industrial gamma radiography have been receiving especial treatment by regulatory authorities of most Member States. The main objective of the present work was to evaluate, from the radioprotection point of view, the main advantages of computed radiography (CR) for filmless industrial radiography. In order to accomplish this, both techniques, i.e. conventional and filmless computed radiography were evaluated and compared through practical studies. After the studies performed at the present work it was concluded that computed radiography significantly reduces the inherent doses, reflecting in smaller restricted areas and costs, with consequent improvement in radiological protection and safety. (author)

Assessment of safety culture from the INB organization: A case study for nuclear fuel cycle industry

International Nuclear Information System (INIS)

Goncalves, J.S.; Barreto, A.C.

2002-01-01

The present article describes strategies, methodologies and first results on the Safety Culture Self-assessment Project under way at INB since August 2001. As a Brazilian Government company in charge of the nuclear fuel cycle activities,. the main purposes of the Project is to evaluate the present status of its safety culture and to propose actions to ensure continuous safety improvement at management level of its industrial processes. The proposed safety culture assessment describes INB's various production sites taking into account the different aspects of their activities, such as regional, social and technical issues. The survey was performed in March/2002 very good attendance (about 80%) the employees. The first global survey results are presented in item 4. (author)

Technology and the uranium industry

International Nuclear Information System (INIS)

Pool, T.C.

2000-01-01

Continuing economic and regulatory pressures on the uranium industry can be countered only through advances in technology. Low prices, the 'ALARA' principle, and concerns about 'sustainability' require the industry to continually improve upon its already impressive record of performance. Technological improvement in the uranium industry is necessary in order to: 1) Maintain our resource base through the discovery of ever deeper deposits; 2) Improve the efficiency with which we may exploit - a) very high-grade deposits by remote underground mining methods - b) very low-grade deposits with environmentally-benign, in situ, leaching methods - and c) moderate-grade, near-surface deposits by open-pit mining methods; 3) Meet increasingly stringent and, in many cases, arbitrary and unrealistic environmental and safety requirements; and 4) Cope with increasing competition from an expanding number of sources of secondary supply. Manifestations of the uranium industry's ability to improve its performance through technology can be seen in many ways including: a continuing reduction in production costs; large gains in productivity; and a truly superior record of employee safety. Maintenance of these trends requires both innovation and the open sharing of information. (author)

Technology and the uranium industry

International Nuclear Information System (INIS)

Pool, T.C.

2002-01-01

Continuing economic and regulatory pressures on the uranium industry can be countered only through advances in technology. Low prices, the 'ALARA' principle, and concerns about 'sustainability' require the industry to continually improve upon its already impressive record of performance. Technological improvement in the uranium industry is necessary in order to: (a) Maintain our resource base through the discovery of ever deeper deposits; (b) Improve the efficiency with which we may exploit (i) very high-grade deposits by remote underground mining methods (ii) very low-grade deposits with environmentally-benign, in situ leaching methods - and (iii) moderate-grade, near-surface deposits by open-pit mining methods (c) Meet increasingly stringent and, in many cases, arbitrary and unrealistic environmental and safety requirements; and (d) Cope with increasing competition from an expanding number of sources of secondary supply. Manifestations of the uranium industry's ability to improve its performance through technology can be seen in many ways including: a continuing reduction in production costs; large gains in productivity; and a truly superior record of employee safety. Maintenance of these trends requires both innovation and the open sharing of information. (author)

A discount ordering strategy in two-level supply chain: A case study of textile industry

Directory of Open Access Journals (Sweden)

Laleh Tashakori

2012-10-01

Full Text Available Supplier selection, inventory management and optimal lot sizing has been one of the most important issues in many industries especially in production planning issues associated with texture industry. The proposed model of this paper first introduces an algorithm to choose the best supplier and it determines the optimal lot size using discount strategy. The proposed model of this paper considers different influencing factors such as location, quality of materials, cost, and mutual trust for supplier selection, determines their relative importance weights and then a discounting method is used to determine the ordering lot-size. The preliminary results indicate that the proposed model of this paper can be implemented in texture industry, very efficiently since the ordering discount policy is not sensitive to changes on inventory holding and setup expenditures.

Defining safety culture and the nexus between safety goals and safety culture. 4. Enhancing Safety Culture Through the Establishment of Safety Goals

International Nuclear Information System (INIS)

Tateiwa, Kenji; Miyata, Koichi; Yahagi, Kimitoshi

2001-01-01

efficient management. To seek compatibility between safety culture and efficient management, and to build an agreeable common perception among the utility, regulatory body, and the public on rationalizing the safety level to the extent acceptable, two issues must be considered: (a) establishing safety goals and (b) quantifying the safety culture. As for the first issue, currently no generic safety goal for the nuclear industry is available in Japan. This causes difficulty in deciding whether or not a specific action that takes place in a plant leading to a certain amount of risk increment is acceptable. Therefore, it is important for us to have a safety goal established. By establishing the safety goal, we could utilize it for the following usage: 1. to enable prompt response in case a safety level has entered an unacceptable level; 2. to sustain and enhance the safety culture centered by risk information (sustaining safety culture and achieving rational management simultaneously); 3. to use public relations for plant activities, where condemnation for overlooking safety culture might arrive for a minor risk increasing activity. As for the second issue, we must devise a method to quantify the level of safety culture. This could be done based on the safety culture indicators listed in the appendix of IAEA INSAG-4 (Ref. 1). By quantifying the level of safety culture, a comprehensive safety level of a plant can be evaluated by integrating with the safety level based on PSA. For example, when considering on-line maintenance for specific equipment, it is important not only to assess the safety level in terms of PSA but also to assess the level of safety culture in order to have a comprehensive view of the safety level and to compare it with the safety goal. By both establishing safety goals and quantifying the level of safety culture in a nuclear power plant, the ability to assess the comprehensive safety level of a plant and acknowledge the quantitative margin from the safety

Enabling Mass Customization in Engineer-To-Order Industries

DEFF Research Database (Denmark)

Bonev, Martin

general capabilities to facilitate mass customization in engineer-to-order firms. The established understanding is complemented with interviews of practitioners from 18 engineering companies to obtain further insight into essential aspects of the research field. Based on the gained experience, eleven...... empirical studies have been conducted to develop relevant concepts and methods aiming at enhancing the identified capabilities. This close collaboration with industries ranging from construction to process plants and machinery applications promoted the development of a practical tool, termed Integrated...... Design Model (IDM). The IDM tool integrates adjacency matrixes, node-link diagrams and generic modelling methods, to improve the explicitness and visibility of architectures. Connected to advanced expert systems, such as product configuration systems, the tool enables a formalized procedure for managing...

Safety instrumented systems in the oil and gas industry : Concepts and methods for safety and reliability assessments in design and operation

Energy Technology Data Exchange (ETDEWEB)

Lundteigen, Mary Ann

2009-07-01

This thesis proposes new methods and gives new insight to safety and reliability assessments of safety instrumented systems (SISs). These systems play an important role in many industry sectors and are used to detect the onset of hazardous events and mitigate their consequences to humans, the environment, and material assets. The thesis focuses on SIS applications in the oil and gas industry. Here, the SIS must respond to hazardous events such as gas leakages, fires, and over pressurization. Because there are personnel onboard the oil and gas installations, the operations take place in a vulnerable marine environment, and substantial values are associated with the offshore facilities, the reliability of SIS is of great concern to the public, the authorities, and the plant owners. The objective of this project has been to identify some of the key factors that influence the SIS reliability, clarify their effects on reliability, and suggest means to improve the treatment of these factors in safety and reliability assessments in design and operation. The project builds on concepts, methods, and definitions in two key standards for SIS design, construction, and operation: IEC 61508 and IEC 61511. The main contributions from this project are: A product development model that integrates reliability, availability, maintainability, and safety (RAMS) requirements with product development. The contributions have been presented in ten articles, five published in international journals, two submitted for publication, and three presented at conferences and in conference proceedings. The contributions are also directed to the industry and the actors that are involved in SIS design, construction, and operation. Even if the oil and gas industry is the main focus area, the results may be relevant for other industry sectors as well. SIS manufacturers and SIS designers face a large number of requirements from authorities, oil companies, international standards, and so on. At the same

Radiation protection, safety and associated problems in industrial radiography

International Nuclear Information System (INIS)

Le Roux, P.R.

1990-01-01

Industrial radiography is an indispensable tool for non-destructive testing. Its use entails potential radiation exposure to the operator as well as to the public. Since such radiation has the potential to be harmful, there is a need to limit radiation exposure to a level at which the risk is believed to be acceptable to the individual and to society. The Radiation Protection Society and the Department of National Health believe that the level of protection provided for radiation workers should be comparable with that in other 'safe' industries. The total risk for radiation workers includes the risk of non-radiation related accidents in the various occupations, as well as the special risks of radiation exposure. Industrial radiographers have one of the poorest safety records of all non-medical radiation workers. Operator errors and management errors seem to be the primary contributors to most accidental high exposures. It is necessary to remember that industrial radiography has to be carried out in a wide variety of work places under many different working conditions, both by day and by night. High energy end emissivity (X-ray output or source activity) is required for the radiation to be transmitted through specimens, because these are normally constructed of thick and dense materials such as steel. Additionally, most radiographic sources must be portable to permit use in field locations. On the negative side it must be mentioned that studies undertaken abroad conclude that the most important factors contributing to unsafe operations are human related. Careful planning of the method of work is essential if unnecessary risks are to be avoided. The most effective way of reducing accidents would seem to be to train employees to adhere to established and well documented procedures, to exercise common sense and sound judgement, and to use the protective equipment and devices provided in the manner specified. 2 tabs., 3 refs

Study on Food Quality and Safety Management Based on Hotel Management

OpenAIRE

Shi Zengye

2017-01-01

In recent years, with the frequent occurrence of food safety problems, people have begun to pay attention to food safety, especially the food safety of hotels. This paper proposed a Hazard Analysis and Critical Control Point (HACCP) management system to analyze food safety issues of hotels in order to improve the food quality and safety in hotel management. Through the practical application of the HACCP management system in the hotel catering industry, it was found that the amount of bacteria...

A Program Applying Professional Safety Basics in Construction Projects

Directory of Open Access Journals (Sweden)

Entisar Kadhim Rasheed

2016-04-01

Full Text Available When industrial and constructional renaissance started in the world, the great interest was going on towards the equipment’s, which was the first mean for production. After industry was settled the interest was going on towards the men ship which manpower on which the production depends. It was approved that it represents the basic part in all of the processes and the protection of those individuals against dangers of these equipment’s, industry and its accidents was the basic things which was studied in many researches until it crystallized in general principles for all industries and other take care in each industry. The professional safety is concerned as restrict which aims to take care of humanitarian and material principles also to raise the production of these principles, in the aspect of safety, health and providing the suitable healthy condition to the worker so he can feel safety, confidence and sociological settle, this will increase the production. So In order to maintain the manpower of business risks and to enable them to fulfill their role better to increase production and improve the quality and maintain the machine and supporting the national economy and keep pace with industrial developments and technological came the idea of research to focus on the importance of studying the subject of occupational safety by conducting a field survey to see the reality of professional safety in the relevant departments and work sites and through a questionnaire on the subject and conduct personal interviews with those concerned in this area and to prepare a program for the application of professional safety for each resource (labor, machines, materials, money in construction sites and departments concerned.

Occupational Health and Safety and Organizational Commitment: Evidence from the Ghanaian Mining Industry.

Science.gov (United States)

Amponsah-Tawiah, Kwesi; Mensah, Justice

2016-09-01

This study seeks to examine the relationship and impact of occupational health and safety on employees' organizational commitment in Ghana's mining industry. The study explores occupational health and safety and the different dimensions of organizational commitment. A cross-sectional survey design was used for this study. The respondents were selected based on simple random sampling. Out of 400 questionnaires administered, 370 were returned (77.3% male and 22.7% female) and used for the study. Correlation and multiple regression analysis were used to determine the relationship and impact between the variables. The findings of this study revealed positive and significant relationship between occupational health and safety management, and affective, normative, and continuance commitment. Additionally, the results revealed the significant impact of occupational health and safety on affective, normative, and continuance commitment. Management within the mining sector of Ghana must recognize the fact that workers who feel healthy and safe in the performance of their duties, develop emotional attachment and have a sense of obligation to their organization and are most likely committed to the organization. Employees do not just become committed to the organization; rather, they expect management to first think about their health and safety needs by instituting good and sound policy measures. Thus, management should invest in the protection of employees' health and safety in organizations.

Influence of different safety shoes on gait and plantar pressure: a standardized examination of workers in the automotive industry.

Science.gov (United States)

Ochsmann, Elke; Noll, Ulrike; Ellegast, Rolf; Hermanns, Ingo; Kraus, Thomas

2016-09-30

Working conditions, such as walking and standing on hard surfaces, can increase the development of musculoskeletal complaints. At the interface between flooring and musculoskeletal system, safety shoes may play an important role in the well-being of employees. The aim of this study was to evaluate the effects of different safety shoes on gait and plantar pressure distributions on industrial flooring. Twenty automotive workers were individually fitted out with three different pairs of safety shoes ( "normal" shoes, cushioned shoes, and midfoot bearing shoes). They walked at a given speed of 1.5 m/s. The CUELA measuring system and shoe insoles were used for gait analysis and plantar pressure measurements, respectively. Statistical analysis was conducted by ANOVA analysis for repeated measures. Walking with cushioned safety shoes or a midfoot bearing safety shoe led to a significant decrease of the average trunk inclination (pshoes as well as midfoot bearing shoes (pshoes. As expected, plantar pressure distributions varied significantly between cushioned or midfoot bearing shoes and shoes without ergonomic components. The overall function of safety shoes is the avoidance of injury in case of an industrial accident, but in addition, safety shoes could be a long-term preventive instrument for maintaining health of the employees' musculoskeletal system, as they are able to affect gait parameters. Further research needs to focus on safety shoes in working situations.

Food safety issues and training methods for ready-to-eat foods in the grocery industry.

Science.gov (United States)

Binkley, Margaret; Ghiselli, Richard

2005-10-01

As Americans have become more pressed for time, the use of convenient, simplified meals become a way of life. One aspect of this trend, known as Home Meal Replacement (IIMR), has increased in sales since its inception. Between 1999 and 2001, the average annual expenditure per consumer rose 5.6 pereent, and $958 per person per year was spent in 2002. Along with this growth, food safety risks may have increased. The study reported here examined efforts being undertaken by grocery and convenience stores to control the wholesomeness of INR food items. After a convenience sample of 500 grocery store executives was identified, a 32-item questionnaire was developed and mailed to the executives. The results indicate that the industry has taken food safety seriously with only 10 pereent reporting that they have no food safety training. The executives cited employee turnover as a major concern in food safety today, along with lack of food safety knowledge of the consumer and improper holding temperatures.

The effects of electric power industry restructuring on the safety of nuclear power plants in the United States

Science.gov (United States)

Butler, Thomas S.

Throughout the United States the electric utility industry is restructuring in response to federal legislation mandating deregulation. The electric utility industry has embarked upon an extraordinary experiment by restructuring in response to deregulation that has been advocated on the premise of improving economic efficiency by encouraging competition in as many sectors of the industry as possible. However, unlike the telephone, trucking, and airline industries, the potential effects of electric deregulation reach far beyond simple energy economics. This dissertation presents the potential safety risks involved with the deregulation of the electric power industry in the United States and abroad. The pressures of a competitive environment on utilities with nuclear power plants in their portfolio to lower operation and maintenance costs could squeeze them to resort to some risky cost-cutting measures. These include deferring maintenance, reducing training, downsizing staff, excessive reductions in refueling down time, and increasing the use of on-line maintenance. The results of this study indicate statistically significant differences at the .01 level between the safety of pressurized water reactor nuclear power plants and boiling water reactor nuclear power plants. Boiling water reactors exhibited significantly more problems than did pressurized water reactors.

Construction safety management guide for use with DOE Order 440.1

International Nuclear Information System (INIS)

1997-01-01

DOE Order (DOE O) 440.1, Worker Protection Management for DOE Federal and Contractor Employees, establishes the framework for an effective worker protection program to reduce or eliminate accidental losses, injuries, and illnesses by providing workers with places of employment free of recognized hazards. In addition to prescribing program requirements applicable to all activities performed by DOE and its contractors, DOE O 440.1 provides specific requirements applicable only to construction activities. The intent of these construction-specific requirements is to compel the proactive management of construction safety on a project-by-project basis and, to the greatest extent possible, integrate the management of safety and health, both in terms of project personnel and management methodologies, with the management of the other primary elements of construction project performance: quality, cost and schedule

Occupational safety and health management in the construction industry: a review.

Science.gov (United States)

Jaafar, Mohd Hafiidz; Arifin, Kadir; Aiyub, Kadaruddin; Razman, Muhammad Rizal; Ishak, Muhammad Izzuddin Syakir; Samsurijan, Mohamad Shaharudin

2017-09-11

The construction industry plays a significant role in contributing to the economy and development globally. During the process of construction, various hazards coupled with the unique nature of the industry contribute to high fatality rates. This review refers to previous published studies and related Malaysian legislation documents. Four main elements consisting of human, worksite, management and external elements which cause occupational accidents and illnesses were identified. External and management elements are the underlying causes contributing to occupational safety and health (OSH), while human and worksite elements are more apparent causes of occupational accidents and illnesses. An effective OSH management approach is required to contain all hazards at construction sites. An approach to OSH management constructed by elements of policy, process, personnel and incentive developed in previous work is explored. Changes to the sub-elements according to previous studies and the related Malaysian legislation are also covered in this review.

ECONOMY OF THE NORTH AND NATIONAL SAFETY OF RUSSIA

Directory of Open Access Journals (Sweden)

V.N. Lazhentsev

2008-09-01

Full Text Available It is shown, that national safety of Russia with reference to the North in many respects is determined natural-historical, commercial and industrial, infrastructural and defensive by factors. It is proved, that one of dangerous threat of national safety is increasing export of resources of the North which essentially constrains formation of a home market. The author marks, that infrastructural aspects of national safety and food safety of Russia are connected to same problem. The problems of the North are systematized and the order of their decision is determined.

Risk Perception, Knowledge and Safety Attitude and Hearing Protector Use in Petrochemical Industry Workers

Directory of Open Access Journals (Sweden)

Mahdi Jahangiri

2008-06-01

Full Text Available Background and Aim: Hearing protectors (HP are widely employed as the only measure against noise exposure. However, it is well known that unless do workers wear HP continuously, its efficacy will be very low. The purpose of this study was to determine the influence of risk perception, knowledge and safety attitude on hearing protection use in petrochemical industry's workers.Materials and Methods: In this cross-sectional study a structural questionnaire was administrated to 236 randomly selected workers in Iranian petrochemical industry who had been to 85 dBA noise and some influencing factors including risk perception, knowledge and general attitude to safety on using of HP had been investigated.Results: This study showed that only 20.3% of employees claimed to wear hearing protection all the time when they exposed to noise. There was a significant relationship between use of hearing protector and worker's risk perception (p=0.048 and also their knowledge about hearing protection(p=0.009. Also, the relationship between general attitude of workers to safety and risk perception was statistically significant (p=0.046. Conclusion: The results of the study showed that for promoting the use of hearing protectors, two main strategy should be followed. First, removing the barriers to make hearing protectors compliant, and second enhancing the workers’ risk perception about hearing loss and proper use of ear protectors.

Assessment of reliability of a safety culture questionnaire in the cleanser and washer industries

Directory of Open Access Journals (Sweden)

2012-09-01

Full Text Available Introduction: Occupational injuries and accidents as one of the problems have always been considered important in occupational environments. Domino model that Heinrich was formed to pursue the idea of the cause of the accident is the man. Thus one of the effective way to reduce accidents will be control by the unsafe behaviors among workers by promoting safety culture. .Material and Method: In this descriptive - analytical study, the reliability and exploratory factor analysis was used to evaluate the reliability of the questionnaire. In total 303 questionnaires were analyzed using SPSS 17 software. . Result: The alpha crumbed, coefficient was 0/86. Structural factor of the questionnaire was evaluated using factor analysis. KMO and Bartlett’s sphericity test coefficient were 0/909 and 9785/057, respectively. The varimax rotation showed that all test questions are based on factors. .Conclusion: The results indicated favorable validity of this questionnaire for use in detergents and cleaners industries within the country. Considering the load factor safety culture in detergents and cleaners industries, contained 5 factors including “management commitment”, “education and information exchange,” “supportive environment”, “barriers” and “priority to safety”. The obtained the correlations, the highest positive correlation was belong to the “management commitment” (r=0/952, as the strongest correlation with the safety culture.

Industrial radiography

International Nuclear Information System (INIS)

1994-01-01

This Health and Safety Executive Information Sheet on industrial radiography aims to inform directors and managers of industrial radiography companies on the safety precautions necessary to ensure that their personnel do not exceed dose guidelines for exposure to ionizing radiation. The Ionising Radiations Regulations 1985 (IRR85) require that exposure doses for radiographers are kept as low reasonably practicable. Equipment maintenance, and the employment of proper emergency procedures will help to ensure personnel safety. (UK)

Associations between safety climate and safety management practices in the construction industry.

Science.gov (United States)

Marín, Luz S; Lipscomb, Hester; Cifuentes, Manuel; Punnett, Laura

2017-06-01

Safety climate, a group-level measure of workers' perceptions regarding management's safety priorities, has been suggested as a key predictor of safety outcomes. However, its relationship with actual injury rates is inconsistent. We posit that safety climate may instead be a parallel outcome of workplace safety practices, rather than a determinant of workers' safety behaviors or outcomes. Using a sample of 25 commercial construction companies in Colombia, selected by injury rate stratum (high, medium, low), we examined the relationship between workers' safety climate perceptions and safety management practices (SMPs) reported by safety officers. Workers' perceptions of safety climate were independent of their own company's implementation of SMPs, as measured here, and its injury rates. However, injury rates were negatively related to the implementation of SMPs. Safety management practices may be more important than workers' perceptions of safety climate as direct predictors of injury rates. © 2017 Wiley Periodicals, Inc.

The safety and efficacy of contact lens wear in the industrial and chemical workplace.

Science.gov (United States)

Tyhurst, Keith; McNett, Ryan; Bennett, Edward

2007-11-01

The use and safety of contact lenses in the industrial and chemical workplace has often been questioned since the 1960s because of many unconfirmed reports of ocular injury resulting from contact lens wear. Because of these urban legends, contact lens wear has been banned or wearers have been required to wear additional personal protective equipment (PPE) not required of non-contact lens wearers. Literature review via Medline and Google search. Research has shown that contact lenses typically provide protective benefits that decrease the severity of ocular injury and improve worker performance. While contact lens wear contraindications do exist, in most cases, and with proper precautions, contact lens wear is still possible. Industrial and chemical companies need to establish written contact lens use policies based on current studies that have shown the safety of workplace contact lens wear when combined with the same PPE required of non-contact lens wearers. Practitioners need to discuss, with their contact lens patients, the additional responsibilities required to maintain proper lens hygiene and proper PPE in the workplace.

Design an optimum safety policy for personnel safety management - A system dynamic approach

International Nuclear Information System (INIS)

Balaji, P.

2014-01-01

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making

Design an optimum safety policy for personnel safety management - A system dynamic approach

Energy Technology Data Exchange (ETDEWEB)

Balaji, P. [The Glocal University, Mirzapur Pole, Delhi- Yamuntori Highway, Saharanpur 2470001 (India)

2014-10-06

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

Design an optimum safety policy for personnel safety management - A system dynamic approach

Science.gov (United States)

Balaji, P.

2014-10-01

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

Safety climate practice in Korean manufacturing industry

International Nuclear Information System (INIS)

Baek, Jong-Bae; Bae, Sejong; Ham, Byung-Ho; Singh, Karan P.

2008-01-01

Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended

Safety climate practice in Korean manufacturing industry.

Science.gov (United States)

Baek, Jong-Bae; Bae, Sejong; Ham, Byung-Ho; Singh, Karan P

2008-11-15

Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended.

Safety climate practice in Korean manufacturing industry

Energy Technology Data Exchange (ETDEWEB)

Baek, Jong-Bae [Department of Safety Engineering, Chungju National University, Chungju 380-702 (Korea, Republic of); Bae, Sejong [Department of Biostatistics, University of North Texas Health Science Center, 3500 Camp Bowie Boulevard, Fort Worth, TX 76107 (United States)], E-mail: sbae@hsc.unt.edu; Ham, Byung-Ho [Department of Industrial Safety, Ministry of Labor (Korea, Republic of); Singh, Karan P. [Department of Biostatistics, University of North Texas Health Science Center, 3500 Camp Bowie Boulevard, Fort Worth, TX 76107 (United States)

2008-11-15

Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended.

PSO Based Optimal Design of Fractional Order Controller for Industrial Application

OpenAIRE

Rohit Gupta; Ruchika

2016-01-01

In this paper, a PSO based fractional order PID (FOPID) controller is proposed for concentration control of an isothermal Continuous Stirred Tank Reactor (CSTR) problem. CSTR is used to carry out chemical reactions in industries, which possesses complex nonlinear dynamic characteristics. Particle Swarm Optimization algorithm technique, which is an evolutionary optimization technique based on the movement and intelligence of swarm is proposed for tuning of the controller for this system. Compa...

On the state of the radiation safety in the atomic energy and nuclear industry of Russia

International Nuclear Information System (INIS)

Panfilov, A.P.

1994-01-01

The general aspects of the activity of organs of government in the field of human radiation protection and some other problems of nuclear industry connecting with the new economic and politic situation in Russia have been discussed. There are present information about the organs of government relating to the questions of radiation safety and the major directions of governmental policy in this fields. Some problems of the elimination of the consequences of the accidents in NPPs (Chernobyl, Chelyabinsk), the programs of the radiation safety improvement of population and the information about new normative nuclear safety documents have also been written in this report. (author)

Installation services in the lignite industry. Implementing health and safety; Montageeinsaetze in der Braunkohlenindustrie. Handlungsfeld fuer den Arbeitsschutz

Energy Technology Data Exchange (ETDEWEB)

Roskopf, Norbert [Roskopf Vulkanisation GmbH, Aachen (Germany)

2011-07-01

The increasing number of assignments of contractors in the lignite industry challenges both the client and the contractor with respect to health and safety. Additional endeavours have to be made concerning information, communication, coordination and assurance. Quantitative differences of occupational safety can be made up by operator support. The contractor himself is required to highly focus on health and safety issues. The European Agency for Safety and Health at Work (EU OSHA) and its campaign 'Healthy Workplaces - Safe Maintenance' currently raises the awareness of all parties being involved. More information can be found under http://hw.osha.europa.eu. (orig.)

Days on safety of industrial radiographic controls; Securite des controles radiographiques industriels

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-07-01

This program is divided in three parts: the context and the regulations, the preparation and the implementation, the tools of prevention and the initiatives and the perspectives.In the first part devoted to the context and regulation are: the context by the Authority of nuclear safety (A.S.N.), the regulation referential, the transport of gamma-graphs; in the second part are the distribution of liabilities, materials and associated requirements, the feedback of incidents and exploitation of it, training and base requirements, works of S.F.R.P./C.O.F.R.E.N.D. and the A.S.N. position; the third part includes help to evaluation of risks at working places of industry radiologists, dosimetry study of a working place, guide to evaluate oneself; the fourth part devoted to the initiatives and the perspectives are: regional experiences charters of good practices in industry radiography, integration of works and deployment by the members of the C.O.F.R.E.N.D., perspectives in matter of prevention of occupational risks in the area of industry radiography. (N.C.)

Utah ITS/CVO business plan : using technology to maximize highway safety and improve government and industry productivity

Science.gov (United States)

1997-12-31

This plan was produced to maximize highway safety and increase government and industry productivity through the application of Intelligent Transportation System/Commercial Vehicle Operations (ITS/CVO) technologies to support regulatory and enforcemen...

Decree no 77-623 of 6 June 1977 amending Decree no 73-278 of 13 March 1973 setting up a Superior Council for Nuclear Safety and a Central Service for the Safety of Nuclear Installations

International Nuclear Information System (INIS)

1977-01-01

Under this Decree, the Central Service for the Safety of Nuclear Installations is placed from now onwards within the Directorate of Mines which comes under the Ministry of Industry, Trade and Crafts. The Head of the Central Service for the Safety of Nuclear Installations and his deputy are appointed by Order of the Minister of Industry, Trade and Crafts, on the proposal of the Director of Mines. (NEA) [fr

Resolution 12/2004 Guideline for implementation of safety regulations in the practice of industrial radiography

International Nuclear Information System (INIS)

2004-01-01

1. This guide is intended to clarify, in relation to its application in practice Industrial Radiography, the provisions of: a) Joint Resolution CITMA-MINSAP, of December 15, 2002, Regulation: B asic Radiation Safety Standards , hereinafter Regulation NBS; b) Resolution No. 25/98 of CITMA Regulation. A uthorization Practices Associated with the use of ionizing radiation , hereinafter Resolution 25/98; c) Resolution 121/2000 CITMA Regulation: F or the Safe Transport of Radioactive materials , hereinafter Resolution 121/2000; and in d) Joint Resolution CITMA-MINSAP, Regulation: S election, Training and Authorization of personnel performing Employment Practices Associated Radiation Ionizing . 2. For the purposes of applying this Guide considers the practice of Industrial Radiography includes the following techniques: a) Industrial Radiography with use of gamma radiation sources; b) crawler radiography equipment; and c) Industrial Radiography with X-rays

Order Picking Process in Warehouse: Case Study of Dairy Industry in Croatia

Directory of Open Access Journals (Sweden)

Josip Habazin

2017-02-01

Full Text Available The proper functioning of warehouse processes is fundamental for operational improvement and overall logistic supply chain improvement. Order picking is considered one of the most important from the group. Throughout picking orders in warehouses, the presence of human work is highly reflected, with the main goal to reduce the process time as much as possible, that is, to the very minimum. There are several different order picking methods, and nowadays, the most common ones are being developed and are significantly dependent on the type of goods, the warehouse equipment, etc., and those that stand out are scanning and picking by voice. This paper will provide information regarding the dairy industry in the Republic of Croatia with the analysis of order picking process in the observed company. Overall research highlighted the problem and resulted in proposals of solutions.

Provision of radiation safety at the designing of the industrial complex of solid radwaste management (ICSRM)

International Nuclear Information System (INIS)

Lobach, S.Yu.; Sevastyuk, O.V.

2003-01-01

The article presents the basic principles and criteria of the radiation safety provision, organization of the radiation control system, and dose calculation for the staff irradiation at the construction and operation of the Industrial complex of solid radwaste management (ICSRM)

Applying industrial symbiosis to chemical industry: A literature review

Science.gov (United States)

Cui, Hua; Liu, Changhao

2017-08-01

Chemical industry plays an important role in promoting the development of global economy and human society. However, the negative effects caused by chemical production cannot be ignored, which often leads to serious resource consumption and environmental pollution. It is essential for chemical industry to achieve a sustainable development. Industrial symbiosis is one of the key topics in the field of industrial ecology and circular economy, which has been identified as a creative path leading to sustainability. Based on an extensively searching for literatures on linking industrial symbiosis with chemical industry, this paper aims to review the literatures which involves three aspects: (1) economic and environmental benefits achieved by chemical industry through implementing industrial symbiosis, (2) chemical eco-industrial parks, (3) and safety issues for chemical industry. An outlook is also provided. This paper concludes that: (1) chemical industry can achieve both economic and environmental benefits by implementing industrial symbiosis, (2) establishing eco-industrial parks is essential for chemical industry to implement and improve industrial symbiosis, and (3) there is a close relationship between IS and safety issues of chemical industry.

Ministries of Finance and of Industry and Energy-Order No. 592-A/93 of 15 June

International Nuclear Information System (INIS)

1993-01-01

The National Laboratory of Industrial Engineering and Technology was converted into the National Institute of Industrial Engineering and Technology - INETI by Decree-Law No. 240/92 of 22 October 1992. It is an Institute for technological research and development which provides support to the different industrial sectors in the ambit of the Ministry of Industry and Energy. This Order specifies that INETI is made up of institutes, technical and scientific services, central services and regional delegations. Its responsibilities in the nuclear field are discharged by its Institute for energy Technologies. (NEA)

Learning Lessons from TMI to Fukushima and Other Industrial Accidents: Keys for Assessing Safety Management Practices

International Nuclear Information System (INIS)

Dechy, N.; Rousseau, J.-M.; Dien, Y.; Montmayeul, R.; Llory, M.

2016-01-01

The main objective of the paper is to discuss and to argue about transfer, from an industrial sector to another industrial sector, of lessons learnt from accidents. It will be achieved through the discussion of some theoretical foundations and through the illustration of examples of application cases in assessment of safety management practices in Nuclear Power Plant (NPP). The nuclear energy production industry has faced three big ones in 30 years (TMI, Chernobyl, Fukushima) involving three different reactor technologies operated in three quite different cultural, organizational and regulatory contexts. Each of those accident has been the origin of questions, but also generator of lessons, some changing the worldview (see Wilpert and Fahlbruch, 1998) of what does cause an accident in addition to the engineering view about the importance of technical failures (human error, safety culture, sociotechnical interactions). Some of their main lessons were implemented such as improvements of human-machine interfaces ergonomics, recast of some emergency operating procedures, severe accident mitigation strategies and crisis management. Some lessons did not really provide deep changes. It is the case for organizational lessons such as, organizational complexity, management of production pressures, regulatory capture, and failure to learn, etc.

Safety regulations of radiation sources in industry in the Philippines

Energy Technology Data Exchange (ETDEWEB)

Borras, A M [Licensing and Evaluation Section, Nuclear Regulations Licensing and Safeguards Division, Philippine Nuclear Research Institute, Diliman, Quezon City (Philippines)

1992-12-31

The Philippine Nuclear Research Institute (PNRI) by virtue of Republic Act 2067, as amended, Republic Act 5207 and Executive Order 128 (1987), was mandated to advance and regulate the safe and peaceful applications of nuclear science and technology in the Philippines. The PNRI was formerly the Philippine Atomic Energy Commission established in 1958. This report aims to share the experiences of the PNRI on licensing and regulating the safe use of radioactive materials in industry, particularly in industrial gamma radiography, nuclear gauges and radioactive tracers. It enumerates the licensing and enforcement procedures. Some common problems encountered in the licensing and enforcement activities and comments of future plans to resolve the problems were also discussed. (Author).

Safety regulations of radiation sources in industry in the Philippines

International Nuclear Information System (INIS)

Borras, A.M.

1991-01-01

The Philippine Nuclear Research Institute (PNRI) by virtue of Republic Act 2067, as amended, Republic Act 5207 and Executive Order 128 (1987), was mandated to advance and regulate the safe and peaceful applications of nuclear science and technology in the Philippines. The PNRI was formerly the Philippine Atomic Energy Commission established in 1958. This report aims to share the experiences of the PNRI on licensing and regulating the safe use of radioactive materials in industry, particularly in industrial gamma radiography, nuclear gauges and radioactive tracers. It enumerates the licensing and enforcement procedures. Some common problems encountered in the licensing and enforcement activities and comments of future plans to resolve the problems were also discussed. (Author)

Regulatory inspection practices for industrial safety (electrical, mechanical, material handling and conventional aspects)

International Nuclear Information System (INIS)

Agarwal, K.

2017-01-01

Regulatory Inspection (RI) of BARC facilities and projects are carried out under the guidance of BARC Safety Council (BSC) Secretariat. Basically facilities and projects have been divided into two board categories viz. radiological facilities and non-radiological facilities. The Rls of radiological facilities should be carried out under OPSRC and of non-radiological facilities under CFSRC. Periodicity of inspection shall be at least once in a year. The RI of projects is carried out under concerned DSRC. RI practices with industrial safety which includes electrical, mechanical, material handling and conventional aspect for these facilities starts with check lists. The inspection areas are prepared in the form of checklists which includes availability of approved documents, compliance status of previous RIT and various safety committee's recommendations, radiological status of facilities, prompt reporting of safety related unusual occurrences, major incident, site visit for verification of actual status of system/plant. The practices for inspection in the area of electrical safety shall include checking of maintenance procedure for all critical class IV system equipment's such as HT panel, LT panel, transformer and motors. Load testing of Class III system such as D.G. set etc. shall be carried out as technical specification surveillance schedule. Status of aviation lights, number of qualified staff, availability of qualified staff etc. shall be form of inspection

Perspectives on the application of order-statistics in best-estimate plus uncertainty nuclear safety analysis

International Nuclear Information System (INIS)

Martin, Robert P.; Nutt, William T.

2011-01-01

Research highlights: → Historical recitation on application of order-statistics models to nuclear power plant thermal-hydraulics safety analysis. → Interpretation of regulatory language regarding 10 CFR 50.46 reference to a 'high level of probability'. → Derivation and explanation of order-statistics-based evaluation methodologies considering multi-variate acceptance criteria. → Summary of order-statistics models and recommendations to the nuclear power plant thermal-hydraulics safety analysis community. - Abstract: The application of order-statistics in best-estimate plus uncertainty nuclear safety analysis has received a considerable amount of attention from methodology practitioners, regulators, and academia. At the root of the debate are two questions: (1) what is an appropriate quantitative interpretation of 'high level of probability' in regulatory language appearing in the LOCA rule, 10 CFR 50.46 and (2) how best to mathematically characterize the multi-variate case. An original derivation is offered to provide a quantitative basis for 'high level of probability.' At root of the second question is whether one should recognize a probability statement based on the tolerance region method of Wald and Guba, et al., for multi-variate problems, one explicitly based on the regulatory limits, best articulated in the Wallis-Nutt 'Testing Method', or something else entirely. This paper reviews the origins of the different positions, key assumptions, limitations, and relationship to addressing acceptance criteria. It presents a mathematical interpretation of the regulatory language, including a complete derivation of uni-variate order-statistics (as credited in AREVA's Realistic Large Break LOCA methodology) and extension to multi-variate situations. Lastly, it provides recommendations for LOCA applications, endorsing the 'Testing Method' and addressing acceptance methods allowing for limited sample failures.

Safety

International Nuclear Information System (INIS)

1998-01-01

A brief account of activities carried out by the Nuclear power plants Jaslovske Bohunice in 1997 is presented. These activities are reported under the headings: (1) Nuclear safety; (2) Industrial and health safety; (3) Radiation safety; and Fire protection

Health, safety, and environmental auditing in the E and P industry

International Nuclear Information System (INIS)

Sexton, K.; Visser, K.

1991-01-01

This paper gives an overview of the development of auditing within the field of Health, Safety and Environmental (HSE) management in the E and P industry. Auditing of these aspects of the business is relatively recent, and the adoption of formal audit programmes is increasingly regarded as an essential element of the HSE management program. Auditing provides assurance that internal controls are working effectively, and provides vital information for system improvement. An overview will be given of the transitional phases that the HSE auditing process has been through; the factors that have influenced those developments; and some views on potential future developments

Problems of Rural Food Safety and Strategies of Constructing Supervision System

Institute of Scientific and Technical Information of China (English)

2011-01-01

This paper expounds the practical necessity of constructing diversified rural food safety supervision system as follows: it is the necessary requirements of guaranteeing people’s health and life safety; it is an important component of governmental function of social management and the logical extension of administrative responsibilities; it is the basis of maintaining order of rural society and constructing harmonious society. The main problems existing in the supervision of rural food safety are analyzed as follows: first, the legislative work of rural food safety lags behind to some extent; second, the supervision of governmental departments on rural food safety is insufficient; third, the industrial supervision mechanism of rural food security is not perfect; fourth, the role of rural social organizations in supervising food safety is limited; fifth, the farmers’ awareness of food safety supervision is not strong. Based on these problems, the targeted strategies of constructing diversified rural food safety supervision system are put forward as follows: accelerate the legislation of rural food safety, and ensure that there are laws to go by; give play to the dominant role of government, and strengthen administrative supervision on rural food safety; perfect industrial convention of rural food safety, and improve industrial supervision mechanism; actively support the fostering of social organizations, and give play to the role of supervision of organizations; cultivate correct concept of rights and obligations of farmers, and form awareness of food safety supervision.

Evaluating safety-critical organizations - emphasis on the nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Reiman, Teemu; Oedewald, Pia (VTT, Technical Research Centre of Finland (Finland))

2009-04-15

- it is understood that safety is a complex phenomenon. Safety is understood as a property of an entire system and not just absence of incidents - people feel personally responsible for the safety of the entire system, they feel they can have an effect on safety - the organizations aims for understanding the hazards and anticipating the risks in their activities - the organization is alert to the possibility of an unanticipated event - good prerequisites for carrying out the daily work exist. An organizational evaluation should aim at reasoning the: - sources of effectiveness in the organizational dimensions - sources of ineffectiveness in the organization dimensions - social processes in the organization - psychological outcomes of the current organization on a personnel level, e.g. motivation, understanding of hazards and sense of control. When drawing inferences from the organizational evaluations and defining development initiatives, it is important to consider actions that will promote and maintain the strengths of the organization as well as actions that will address and develop the weak areas. Issues associated with data collection and choice of methods has been a topic of much discussion in the field of evaluation of safety-critical organizations. We argue that the problem of collecting data is not the most important problem in terms of facilitating valid evaluations. A more important problem concerns the criteria that are used, as well as the operationalization of criteria into something measurable. Too much effort has been spent on methods and too little on contemplating the question of valid evaluation criteria and a valid means of deducing from the data whether the criteria are fulfilled. In order to accomplish this, a valid evaluation framework is needed, which incorporates the idea of organization as a complex sociotechnical system. This report has been an attempt to illustrate the premises and key issues to consider in organizational evaluations. No

Evaluating safety-critical organizations - emphasis on the nuclear industry

International Nuclear Information System (INIS)

Reiman, Teemu; Oedewald, Pia

2009-04-01

understood that safety is a complex phenomenon. Safety is understood as a property of an entire system and not just absence of incidents - people feel personally responsible for the safety of the entire system, they feel they can have an effect on safety - the organizations aims for understanding the hazards and anticipating the risks in their activities - the organization is alert to the possibility of an unanticipated event - good prerequisites for carrying out the daily work exist. An organizational evaluation should aim at reasoning the: - sources of effectiveness in the organizational dimensions - sources of ineffectiveness in the organization dimensions - social processes in the organization - psychological outcomes of the current organization on a personnel level, e.g. motivation, understanding of hazards and sense of control. When drawing inferences from the organizational evaluations and defining development initiatives, it is important to consider actions that will promote and maintain the strengths of the organization as well as actions that will address and develop the weak areas. Issues associated with data collection and choice of methods has been a topic of much discussion in the field of evaluation of safety-critical organizations. We argue that the problem of collecting data is not the most important problem in terms of facilitating valid evaluations. A more important problem concerns the criteria that are used, as well as the operationalization of criteria into something measurable. Too much effort has been spent on methods and too little on contemplating the question of valid evaluation criteria and a valid means of deducing from the data whether the criteria are fulfilled. In order to accomplish this, a valid evaluation framework is needed, which incorporates the idea of organization as a complex sociotechnical system. This report has been an attempt to illustrate the premises and key issues to consider in organizational evaluations. No method can

Safety sans Frontières: An International Safety Culture Model.

Science.gov (United States)

Reader, Tom W; Noort, Mark C; Shorrock, Steven; Kirwan, Barry

2015-05-01

The management of safety culture in international and culturally diverse organizations is a concern for many high-risk industries. Yet, research has primarily developed models of safety culture within Western countries, and there is a need to extend investigations of safety culture to global environments. We examined (i) whether safety culture can be reliably measured within a single industry operating across different cultural environments, and (ii) if there is an association between safety culture and national culture. The psychometric properties of a safety culture model developed for the air traffic management (ATM) industry were examined in 17 European countries from four culturally distinct regions of Europe (North, East, South, West). Participants were ATM operational staff (n = 5,176) and management staff (n = 1,230). Through employing multigroup confirmatory factor analysis, good psychometric properties of the model were established. This demonstrates, for the first time, that when safety culture models are tailored to a specific industry, they can operate consistently across national boundaries and occupational groups. Additionally, safety culture scores at both regional and national levels were associated with country-level data on Hofstede's five national culture dimensions (collectivism, power distance, uncertainty avoidance, masculinity, and long-term orientation). MANOVAs indicated safety culture to be most positive in Northern Europe, less so in Western and Eastern Europe, and least positive in Southern Europe. This indicates that national cultural traits may influence the development of organizational safety culture, with significant implications for safety culture theory and practice. © 2015 Society for Risk Analysis.

Industry Operating Experience Process at Krsko NPP

International Nuclear Information System (INIS)

Bach, B.; Bozin, B.; Cizmek, R.

2012-01-01

Experience has shown that number of minor events and near misses, usually without immediate or significant impact to plant safety and reliability, are precursors of significant or severe events due to the same or similar root or apparent cause(s). It is therefore desirable to identify and analyze weaknesses of the precursor problems (events) in order to prevent occurrence of significant events. Theoretically, significant events could be prevented from occurring if the root cause(s) of these precursor problems could be identified and eliminated. The Operating Experience Program identifies such event precursors and by reporting them to the industry, plant specific corrective actions can be taken to prevent events at other operational plants. The intent of the Operating Experience Program is therefore to improve nuclear power plant safety and reliability of the operating nuclear power plants. Each plant develops its own Operating Experience Program in order to learn from the in-house operating experience as well as from the world community of nuclear plants. The effective use of operating experience includes analyzing both plant and industry events in order to identify fundamental weaknesses and then determining appropriate plant-specific actions that will minimize the likelihood of similar events. Learning and applying the lessons from operating experience is an integral part of station safety culture and is encouraged by managers throughout the top plant administrative programs and procedures. Krsko NPP is developed it own Operating Experience Program by using the most relevant INPO/WANO/IAEA guidelines as well as its own knowledge, skills an operating practice. The Operating Experience Program is a part of the Corrective Action Program, which is among top management programs, thus program is strongly encouraged by top management. The purpose of Operating Experience Program is to provide guidance for using, sharing, and evaluating operating experience information

Regulatory inspection: a powerful tool to control industrial radioactive sources

International Nuclear Information System (INIS)

Silva, F.C.A. da; Leocadio, J.C.; Ramalho, A.T.

2008-01-01

An important contribution for Brazilian development, especially for the quality control of products, is the use of radiation sources by conventional industries. There are in Brazil roughly 3,000 radioactive sources spread out among 950 industries. The main industrial practices involved are: industrial radiography, industrial irradiators, industrial accelerators, well logging petroleum and nuclear gauges. More than 1,800 Radiation Protection Officers (RPOs) were qualified to work in these practices. The present work presents a brief description of the safety control over industrial radioactive installations performed by the Brazilian Regulatory Authority, i.e. the National Commission of Nuclear Energy (CNEN). This paper also describes the national system for radiation safety inspections, the regulation infrastructure and the national inventory of industrial installations. The inspections are based on specific indicators, and their periodicity depends on the risk and type of installation. The present work discusses some relevant aspects that must be considered during the inspections, in order to make the inspections more efficient in controlling the sources. One of these aspects regards the evaluation of the storage place for the sources, a very important parameter for preventing future risky situations. (author)

Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry

OpenAIRE

Yoon, Seok J.; Lin, Hsing K.; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

2013-01-01

Background: The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. Methods: The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became ...

System safety education focused on industrial engineering

Science.gov (United States)

Johnston, W. L.; Morris, R. S.

1971-01-01

An educational program, designed to train students with the specific skills needed to become safety specialists, is described. The discussion concentrates on application, selection, and utilization of various system safety analytical approaches. Emphasis is also placed on the management of a system safety program, its relationship with other disciplines, and new developments and applications of system safety techniques.

Realism in nuclear criticality safety

International Nuclear Information System (INIS)

McLaughlin, T. P.

2009-01-01

Commercial nuclear power plant operation and regulation have made remarkable progress since the Three Mile Island Accident. This is attributed largely to a heavy dose of introspection and self-regulation by the industry and to a significant infusion of risk-informed and performance-based regulation by the Nuclear Regulatory Commission. This truly represents reality in action both by the plant operators and the regulators. On the other hand, the implementation of nuclear criticality safety in ex-reactor operations involving significant quantities of fissile material has not progressed, but, tragically, it has regressed. Not only is the practice of the discipline in excess of a factor of ten more expensive than decades ago; the trend continues. This unfortunate reality is attributed to a lack of coordination within the industry (as contrasted to what occurred in the reactor operations sector), and to a lack of implementation of risk-informed and performance-based regulation by the NRC While the criticality safety discipline is orders of magnitude smaller than the reactor safety discipline, both operators and regulators must learn from the progress made in reactor safety and apply it to the former to reduce the waste, inefficiency and potentially increased accident risks associated with current practices. Only when these changes are made will there be progress made toward putting realism back into nuclear criticality safety. (authors)

Evolution and current situation of the quality and industrial safety. Concepts, laws and regulations; Evolucion y situacion actual de la calidad y seguridad industrial. Conceptos, leyes y reglamentos

Energy Technology Data Exchange (ETDEWEB)

Munoz, A.