WorldWideScience

Sample records for industry overlooks issues

  1. Some issues that easily to be overlooked during the environmental impact assessment of medical electrical accelerators

    International Nuclear Information System (INIS)

    Fu Jie; Zhou Qifu; Chen Dongliang

    2011-01-01

    This paper mainly introduces the contents of shielding design in the No. 151 report of NCRP published in 2005, discusses some issues that easily to be overlooked during the environmental impact assessment of medical electrical accelerators in China. Some references will be provided in the medical electrical accelerators' shielding design and assessment to achieved the purpose of scientific, reasonable, feasible and economical radiation shielding protection. (authors)

  2. Invertebrate welfare: an overlooked issue

    Directory of Open Access Journals (Sweden)

    Kelsey Horvath

    2013-03-01

    Full Text Available While invertebrates make up the majority of animal species, their welfare is overlooked compared to the concern shown to vertebrates. This fact is highlighted by the near absence of regulations in animal research, with the exception of cephalopods in the European Union. This is often justified by assumptions that invertebrates do not experience pain and stress while lacking the capacity for higher order cognitive functions. Recent research suggests that invertebrates may be just as capable as vertebrates in experiencing pain and stress, and some species display comparable cognitive capacities. Another obstacle is the negative view of invertebrates by the public, which often regards them as pests with no individual personalities, gastronomic entities, or individuals for scientific experimentation without rules. Increasingly, studies have revealed that invertebrates possess individual profiles comparable to the personalities found in vertebrates. Given the large economic impact of invertebrates, developing certain attitude changes in invertebrate welfare may be beneficial for producers while providing higher welfare conditions for the animals. While the immense number and type of species makes it difficult to suggest that all invertebrates will benefit from increased welfare, in this review we provide evidence that the topic of invertebrate welfare should be revisited, more thoroughly investigated, and in cases where appropriate, formally instituted.

  3. NGOs and gender policy: some issues from the south Indian silk-reeling industry.

    Science.gov (United States)

    Mayoux, L

    1993-10-01

    In India, silk reeling, the middle stage in silk production, is potentially very profitable, and the silk industry has been required to adopt gender-aware policies such as appointing female staff and introducing gender sensitization training. To date, policies designed to encourage women's entrepreneurship in the reeling industry have been unsuccessful. Men have appropriated credit issued in women's names, and no women's cooperatives are currently in operation. The policies designed to encourage female entrepreneurship in reeling woefully overlooked the complexity of this work which involves a substantial investment of capital and significant risk. Women and girls continue to work as unpaid family workers and wage laborers without the benefits of governmental policies to protect their interests. In fact, attempts to introduce labor legislation to protect women have been blocked on the national level by the powerful Reelers' Association. Policies which address gender issues in the family and in the wider context of the silk industry are also lacking, and there is a wide variation in how women are able or unable to manipulate their positions to their advantage. Women's inabilities are the root cause of their inability to become entrepreneurs and improve their labor status. Nongovernmental organizations can enhance entrepreneurship and cooperative development by improving training in all aspects of running a business and in group formation. Women laborers must organize to improve wages and working conditions, and women must be able to increase their control over income and resources and their access to the outside world even as they decrease the time spent on unpaid reproductive labor.

  4. State of the industry

    International Nuclear Information System (INIS)

    Lilly, P.; Ogden, S.O.; Sell, D.P.; Garges, T.W.

    1991-01-01

    This panel discussion on the state of the US coal industry presented three points of view. The issue is one of perspective, for the coal miner current conditions are not particularly encouraging given the economic climate, environmental issues, and the ambiguity of the proposed National Energy Strategy. To make matters worse, much of the public views the production and utilization of coal as an environmental risk. It is easy to overlook the fact that the US coal industry is poised for tremendous growth and opportunity. Demand for energy and electricity worldwide is projected to increase significantly and coal is expected to play a major role. New technologies such as clean coal combustion and coal gasification will be required to meet growing human and environmental requirements. The coal industry must educate the public on the capabilities of coal, advance new technologies for deployment and commercial development, demonstrate prudent mining and safety records and develop human talent and skills necessary to advance US coal in the 21st century

  5. Industrial implementation issues of Total Site Heat Integration

    International Nuclear Information System (INIS)

    Chew, Kew Hong; Klemeš, Jiří Jaromír; Wan Alwi, Sharifah Rafidah; Abdul Manan, Zainuddin

    2013-01-01

    Heat Integration has been a well-established energy conservation strategy in the industry. Total Site Heat Integration (TSHI) has received growing interest since its inception in the 90s. The methodology has been used with certain simplifications to solve TSHI problems. This paper investigates the main issues that can influence the practical implementation of TSHI in the industry. The main aim is to provide an assessment and possible guidance for future development and extension of the TSHI methodology from the industrial perspective. Several key issues have been identified as being of vital importance for the industries: design, operation, reliability/availability/maintenance, regulatory/policy and economics. Design issues to consider include plant layout, pressure drop, etc. For operation, issues such as startup and shutdown need to be considered. Reliability, availability and maintenance (RAM) are important as they directly affect the production. Relevant government policy and incentives are also important when considering the options for TSHI. Finally, a TSHI system needs to be economically viable. This paper highlights the key issues to be considered for a successful implementation of TSHI. The impacts of these issues on TS integration are summarised in a matrix, which forms a basis for an improved and closer-to-real-life implementation of the TSHI methodology. Highlights: ► Current TSHI methodology has been used for solving models with certain simplifications. ► Several issues that can influence practical implementation of TSHI are identified. ► Impacts of these issues on safety, environment and economics are evaluated. ► The findings form a basis for an improved and practical implementation of TSHI

  6. It Security Issues Within the Video Game Industry

    OpenAIRE

    STEPHEN MOHR; SYED (SHAWON) RAHMAN,

    2011-01-01

    IT security issues are an important aspect for each and every organization within the video game industry. Within the video game industry alone, you might not normally think of security risks being an issue. But as we can and have seen in recent news, no company is immune to security risks no matter how big or how small. While each of these organizations will never be exactly the same as the next, there are common security issues that can and do affect each and every video game company. In or...

  7. Industrial pollutions is an environmental issue of Karachi urban area

    International Nuclear Information System (INIS)

    Jokhio, M.H.; Abro, M.I.; Essani, A.

    2005-01-01

    The Industrial pollution is one of the serious Environmental issues of the Karachi urban area, categorized as air pollution and water pollution. The localization more the 6000 industries in Karachi urban area at four different sites of Sindh industrial trading estate, Landhi industrial trading estate, Korangi industrial area west Warf industrials, Port Qasim industrial. Area and Hub industrial are near Karachi city. The major iron and steel industries includes Pakistan steel mills and its allied industries at Bin Qasim more than 100 re-rolling industries are located at site area. Karachi ship yard engineering works, Peoples steel Mill, automobile industries and various manufacturing industries which requires metal and its alloy in manufacturing of product mostly located at Bin Qasim, Korangi, and Shershah site areas. None of the industrial sector contain the waster treatment or recycling plant. The ill planted growth of Karachi and its industries caused the environmental degradation of the city and its coastal areas complete with massive mangrove destruction, air water, fishing, and agriculture possessing a potential threat to the lives of more than 10 million citizens. The environmental issues of the metal related industries include the scrap, waste and pollution. Scrapes am waste of the metal industries can be reused in other manufacturing of engineering materials or recycled to produce the new material. However the pollution is the one of the major environmental issue related with the metal industries which need the considerable research and development work in order to over come the serve environmental issues of the urban areas. This article reviews and identifies the level of industrial pollution emphasized on metal related industries of the Karachi urban areas. (author)

  8. Practicing industrial safety - issues involved

    International Nuclear Information System (INIS)

    Gunasekaran, P.

    2016-01-01

    Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

  9. 7 CFR 1980.488 - Guaranteed industrial development bond issues.

    Science.gov (United States)

    2010-01-01

    ... industrial plants for lease to private businesses engaged in industrial manufacturing and does not provide... 7 Agriculture 14 2010-01-01 2009-01-01 true Guaranteed industrial development bond issues. 1980..., DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL Business and Industrial Loan...

  10. Special issue: the nuclear industry in Europe

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    This special issue contains papers on the following topics: French nuclear policy; nuclear energy development in Europe; nuclear diversification; Alsthom-Atlantique in the nuclear field; 1981 nuclear electricity generation; EDF siting policy; the N4 model of the 1300 MW series; Creys-Malville; the nuclear industry in Europe; pumps in the nuclear industry [fr

  11. Big Data in the Industry - Overview of Selected Issues

    Science.gov (United States)

    Gierej, Sylwia

    2017-12-01

    This article reviews selected issues related to the use of Big Data in the industry. The aim is to define the potential scope and forms of using large data sets in manufacturing companies. By systematically reviewing scientific and professional literature, selected issues related to the use of mass data analytics in production were analyzed. A definition of Big Data was presented, detailing its main attributes. The importance of mass data processing technology in the development of Industry 4.0 concept has been highlighted. Subsequently, attention was paid to issues such as production process optimization, decision making and mass production individualisation, and indicated the potential for large volumes of data. As a result, conclusions were drawn regarding the potential of using Big Data in the industry.

  12. Development and issues of nuclear industry in Taiwan

    International Nuclear Information System (INIS)

    Kuangchi Liu

    1994-01-01

    Industrial and economic developments in Taiwan have achieved a so-called 'miracle' in the last decades. Endeavors by the private enterprise, prudent planning by the government, and the devoted efforts by the diligent and creative labor forces have been credited jointly with the result. To develop a sustainable nuclear industry in support of an efficient and safe power generation and other applications of nuclear energy in Taiwan, continuing efforts from the private industry, government and each individual of the nuclear industry will be required. In this paper, milestones of the past and major issues for future developments will be discussed

  13. Industry activities to resolve utility procurement issues

    International Nuclear Information System (INIS)

    Rosch, F.

    1993-01-01

    There are several industry organizations which are active in assisting the utilities in their equipment procurement enhancement. They include the Nuclear Management Resources Council (NUMARC), the Electric Power Research Institute (EPRI), and the Nuclear Procurement Issues Committee (NUPIC). The products include the NUMARC Procurement Initiatives, EPRI procurement related guidelines and databases, and NUPIC joint audits and commercial grade surveys. The industry procurement activities and products are reviewed, and their use by utilities to enhance their procurement process is related. 1 fig

  14. Training Issues for the European Automotive Industry

    NARCIS (Netherlands)

    Dankbaar, B.

    1996-01-01

    Provides an overview of the results of an investigation carried out for the European Commission. Aims to identify themes and issues in the field of continuing training in the European automotive industry. A large number of interviews were carried out in all the major car manufacturing countries of

  15. Training issues for the European automotive industry

    NARCIS (Netherlands)

    Dankbaar, B.

    1999-01-01

    Provides an overview of the results of an investigation carried out for the European Commission. Aims to identify themes and issues in the field of continuing training in the European automotive industry. A large number of interviews were carried out in all the major car manufacturing countries of

  16. Issues confronting women participation in the construction industry

    OpenAIRE

    Aulin, Radhlinah; Jingmond, Monika

    2011-01-01

    This paper raises the issues confronting the minority cohort’s participation in the construction industry. Women in construction are seen as the wrong gender to be around for the construction occupations require not only manual dexterity but physical strength. Currently, the industry is employing less than 10% of the female in the workforce with even lower participation in crafts and trade. This paper discussed about the current women participation in construction focusing on the European Uni...

  17. Negotiating Values in the Creative Industries

    DEFF Research Database (Denmark)

    Fairs, festivals and competitive events play a crucial role in the creative industries; yet their significance has been largely overlooked. This book explores the role of such events through a series of studies that include some of the most iconic fairs and festivals in the world. It brings...... together a team of distinguished scholars to examine art fairs, biennales, auctions, book fairs, television programming markets, film festivals, animation film festivals, country music festivals, fashion weeks, wine classifications and wine-tasting events. This diverse set of studies shows that such events...... serve a variety of purposes: as field-configuring events (FCEs), as a way of ritualizing industry practices, and as ‘tournaments of values’ where participants negotiate different cultural values to resolve economic issues. Suitable for academics and practitioners, this book presents a fascinating new...

  18. An Analysis of Policy Issues in Natural Gas Industry Restructuring

    Energy Technology Data Exchange (ETDEWEB)

    Seo, J.K. [Korea Energy Economics Institute, Euiwang (Korea)

    2001-12-01

    This report explores controversial issues and problems that could emerge in the process of implementing the government's restructuring plan for natural gas industry and aims to suggest policy directions regarding the restructuring. To begin with, it examines current conditions surrounding natural gas industry including domestic demand and supply conditions, world LNG market trend, structural changes of the industry in OECD countries, possibilities of introducing effective competition and assignment of existing import contracts. In doing so, we probe whether the direction of the natural gas industry restructuring is proper and suggest that the results be reflected when a more detailed restructuring implementation plan is formulated. Also, this report suggests possible schemes related to major institutional changes expected by the basic restructuring plan and the detailed restructuring implementation plan announced by the government. First, it presents several alternative ways to properly divide up the import/wholesales section of Korea Gas Corporation. Second, it examines critical issues such as the method of using gas supply facilities and gas balancing mechanism, and presents adoptable alternatives for each issue. These issues constitute the core of network and market operation rules which need to be in place when adopting an open access system, which in turn is a prerequisite for sales competition. Third, the report examines price systems, including gas commodity pricing and rate-making design for transportation service, by first anticipating the direction of changes in gas rate regulation. Specifically, it presents possible ways to design the service rate for each function of pipeline network and import terminals, and discusses controversial issues in determining total cost-of-service and allocating the cost-of-service to each functional service offered such as distance-related rates, interruptible service rate. Lastly, in relation to the opening of retail

  19. Engineering structural integrity issues in the pulp and paper industry

    International Nuclear Information System (INIS)

    Garner, A.; Singbeil, D.

    2002-01-01

    ESI issues for Pulp and Paper (P and P) plant are reviewed. Five typical processes are covered, namely: Chemical Pulping, Bleaching, Chemical Recovery, Mechanical Pulping and Papermaking. Equipment, chemical environments and failure modes are summarized with examples from each process. Pressure, temperature, corrosion and rotation are typical sources of risk, which is managed by appropriate inspection. The nature of the P and P Industry and its technology supply is summarized: current trends are consolidation and outsourcing. Three examples are presented to illustrate typical ESI issues: deaerator cracking where the P and P Industry alerted others to this serious cross-industry problem; pressure vessel safety factors and inconsistent international codes; and caustic cracking in continuous kraft digesters, which required rapid and concerted action to diagnose and control. In the future better predictability, data-bases, more formal risk based inspection and fitness-for-service assessments are envisaged. (author)

  20. Multinationals and global climate change. Issues for the automotive and oil industries

    International Nuclear Information System (INIS)

    Kolk, A.; Levy, D.

    2003-01-01

    This chapter analyzes the strategic responses by U.S. and European multinational enterprises (MNEs) in the oil and automobile industries to the global climate change issue. We examine and attempt to explain the differences across regions, across industries, and the changes over time. Traditional economic drivers of strategy do not provide a satisfactory account for these differences, and the chapter focuses instead on the conflicting institutional pressures on MNEs and the implications for their climate strategy. The home-country institutional context and individual corporate histories can create divergent pressures on strategy for MNEs based in different countries. At the same time, the location of MNEs in global industries and their participation in 'global issues arenas' such as climate change generate institutional forces for strategic convergence. It appears that local context influenced initial corporate reactions, but that convergent pressures predominate as the issue matures

  1. Informal leadership support: an often overlooked competitive advantage.

    Science.gov (United States)

    Peters, L H; O'Connor, E J

    2001-01-01

    As environmental pressures mount, the advantage of using the same strategies and tactics employed by competitors continues to shrink. An alternative is adapting and applying answers successfully employed in other industries to health care organizations. Working with informal influence leaders to share your change management efforts represents one such example. Informal influence leaders offer an often-overlooked source of competitive advantage--they have already earned credibility and respect from others, who regularly look to them for guidance. When sharing their views, they significantly influence the acceptance or rejection of new initiatives. Influence leaders reach into every conversation, every meeting, and every decision made in an organization. The important question is whether they will exert their leadership in support or in opposition to changes you propose. By identifying influence leaders and inviting them to join a group to discuss change initiatives, physician executives can create a positive force for change.

  2. Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

    Directory of Open Access Journals (Sweden)

    Mohd Ayob Norizawati

    2014-01-01

    Full Text Available The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destination was tarnished a few years lately and new unfortunates incident in this year bring more damage to Malaysia image. Healthy issues, terrorism, Lahad Datu intrusion, repeated kidnapping and shooting in Sabah, twin airlines incident, riot and illegal demonstration and false reporting by international media brings new challenging to Malaysia. Although some incident may be had short-term impact to Malaysia tourism industry, but it’s still gave the big impact to Malaysia branding process. Many travellers and Malaysian itself still believe that Malaysia is a one of safer destination and country to visit and stayed in, but more outstanding efforts was require to make sure Malaysia tourism industry was capable to recover from this negative impact as soon as possible.

  3. Approaches of the German food industry for addressing the issue of food losses.

    Science.gov (United States)

    Richter, Beate; Bokelmann, Wolfgang

    2016-02-01

    In the food industry the subject of food losses is of great importance due to economic balance and an efficient application of resources as well as the development of an efficient food chain system. This paper presents the explorative results of a quantitative survey of leading companies of the German food industry to evaluate the relevance and handling of this issue. The investigation reveals that the topic food losses have a high significance in the food industry which will probably increase in future. A sample breakdown by branches indicates that the issue has the highest relevance for companies in the confectionery industry. These companies as well as those in the meat and fish industry want to consider the subject prospectively more powerful in their companies. Across the food industry, there is no communication to consumers of the efforts concerning food losses. And companies in the confectionery industry and in the fruit and vegetable industry rather want to engage more powerful in this topic if consumers' interest increases. But in order to minimize food losses at all stages along the supply chain, communication and collaboration at all stages is essential, especially the communication to consumers. Thus, it has to be verified whether a suitable communication can lead to advantages in competition and become an important issue for companies to differentiate from competitors. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Multinationals and global climate change. Issues for the automotive and oil industries

    Energy Technology Data Exchange (ETDEWEB)

    Kolk, A.; Levy, D.

    2003-07-01

    This chapter analyzes the strategic responses by U.S. and European multinational enterprises (MNEs) in the oil and automobile industries to the global climate change issue. We examine and attempt to explain the differences across regions, across industries, and the changes over time. Traditional economic drivers of strategy do not provide a satisfactory account for these differences, and the chapter focuses instead on the conflicting institutional pressures on MNEs and the implications for their climate strategy. The home-country institutional context and individual corporate histories can create divergent pressures on strategy for MNEs based in different countries. At the same time, the location of MNEs in global industries and their participation in 'global issues arenas' such as climate change generate institutional forces for strategic convergence. It appears that local context influenced initial corporate reactions, but that convergent pressures predominate as the issue matures.

  5. The changing structure of the electric power industry: Selected issues, 1998

    International Nuclear Information System (INIS)

    1998-07-01

    More than 3,000 electric utilities in the United States provide electricity to sustain the Nation's economic growth and promote the well-being of its inhabitants. At the end of 1996, the net generating capability of the electric power industry stood at more than 776,000 megawatts. Sales to ultimate consumers in 1996 exceeded 3.1 trillion kilowatthours at a total cost of more than $210 billion. In addition, the industry added over 9 million new customers during the period from 1990 through 1996. The above statistics provide an indication of the size of the electric power industry. Propelled by events of the recent past, the industry is currently in the midst of changing from a vertically integrated and regulated monopoly to a functionally unbundled industry with a competitive market for power generation. Advances in power generation technology, perceived inefficiencies in the industry, large variations in regional electricity prices, and the trend to competitive markets in other regulated industries have all contributed to the transition. Industry changes brought on by this movement are ongoing, and the industry will remain in a transitional state for the next few years or more. During the transition, many issues are being examined, evaluated, and debated. This report focuses on three of them: how wholesale and retail prices have changed since 1990; the power and ability of independent system operators (ISOs) to provide transmission services on a nondiscriminatory basis; and how issues that affect consumer choice, including stranded costs and the determination of retail prices, may be handled either by the US Congress or by State legislatures

  6. The changing structure of the electric power industry: Selected issues, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    More than 3,000 electric utilities in the United States provide electricity to sustain the Nation`s economic growth and promote the well-being of its inhabitants. At the end of 1996, the net generating capability of the electric power industry stood at more than 776,000 megawatts. Sales to ultimate consumers in 1996 exceeded 3.1 trillion kilowatthours at a total cost of more than $210 billion. In addition, the industry added over 9 million new customers during the period from 1990 through 1996. The above statistics provide an indication of the size of the electric power industry. Propelled by events of the recent past, the industry is currently in the midst of changing from a vertically integrated and regulated monopoly to a functionally unbundled industry with a competitive market for power generation. Advances in power generation technology, perceived inefficiencies in the industry, large variations in regional electricity prices, and the trend to competitive markets in other regulated industries have all contributed to the transition. Industry changes brought on by this movement are ongoing, and the industry will remain in a transitional state for the next few years or more. During the transition, many issues are being examined, evaluated, and debated. This report focuses on three of them: how wholesale and retail prices have changed since 1990; the power and ability of independent system operators (ISOs) to provide transmission services on a nondiscriminatory basis; and how issues that affect consumer choice, including stranded costs and the determination of retail prices, may be handled either by the US Congress or by State legislatures.

  7. Resource industries and security issues in northern Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Flanagan, T. [Calgary Univ., AB (Canada). Dept. of Political Science

    2009-06-15

    Public concern over global warming has led to many political attacks on the oil industry, particularly Alberta's tar sand industry. This document focused on security issues in northern Alberta and reviewed past incidences of security threats. The likelihood of sabotage to wells, pipelines, buildings, and other industry facilities was assessed. Five potential sources of opposition were identified, notably individual saboteurs, eco-terrorists, mainstream environmentalists, First Nations, and the Metis people. All except the Metis have at various times used some combination of litigation, blockades, boycotts, sabotage, and violence against economic development projects. This report stated that although such incidents will likely continue in the future, it is unlikely that extra-legal obstruction will become widespread unless these various groups cooperate with each other. Since these groups have different social characteristics and conflicting political interests, it is unlikely that such cooperation will occur. 34 refs.

  8. Time to settle the tax issue for the resource industry

    International Nuclear Information System (INIS)

    Mintz, J.M.

    2001-01-01

    This report presented a brief comment on policy issues concerning taxes imposed on the resource industry. It was suggested that if the resource industry in Canada is to remain competitive beyond the current boom, the federal government should provide a more stable tax environment for investment in the longer run. With the current internationally competitive tax rates and high neutrality among energy sectors, there is presently a unique opportunity to settle this issue and to improve the tax system as a whole. It was suggested that the federal corporate income tax rate on resource profits should be reduced from 28 per cent to 21 per cent as it is in other sectors. It was also suggested that the resource allowance should be replaced with deductibility for resource royalties as payment for the cost of using provincially owned resources. This report also described other changes that could be implemented to improve the tax system and to enhance the competitiveness of the resource sector. It was noted that the changes could result in a single corporate income tax rate on all industrial activities by 2005

  9. Monte-Carlo modelling of Ge detectors - frequently overlooked issues

    International Nuclear Information System (INIS)

    Johnston, P.; Tagziria, H.; Gasparro, J.; Hult, M.

    2006-01-01

    This work concentrates on issues that are commonly encountered, but difficult to define including detectors tilted with respect to the cylindrical axis and otherwise misaligned, deviations of the sensitive volume from a right-cylinder, e.g. a rounded edge of co-axial Ge detectors and errors in the available data about the relevant decay scheme. The paper concentrates on methods used to overcome these difficulties

  10. Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

    OpenAIRE

    Mohd Ayob Norizawati; Masron Tarmiji

    2014-01-01

    The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destinatio...

  11. Future industrial issues for ANDRA

    International Nuclear Information System (INIS)

    Auverlot, D.

    1998-01-01

    ANDRA manages industrially 90 % in volume of radioactive waste produced in France. This is short life waste of low and medium activity. In compliance with the law of 1991, which transformed it into a public body with an industrial and commercial character, ANDRA also heads aspect 2 of the research into the 10 % of remaining highly active long life waste, by attempting to evaluate the possibilities of storing it in deep geological layers, either reversibly or irreversibly. The industrial issues of the future for ANDRA can be in different forms, following three meeting of major importance for ANDRA and for the producers of nuclear waste. These are: the meeting of 2006, at the end of which, in compliance with the law of 1991, the Parliament must re-examine the question of the management of highly active, long life waste; the renewal of nuclear facilities; the future meeting concerning future generations. However, whatever these different stage and whatever the different types of waste considered, the single and major challenge with which ANDRA is confronted is to prove that it is capable of providing a sure danger-free management of all radioactive waste. In this context, it appears necessary, today, to intensify research into aspects 1 and 3 of the law of 1991, to respect the balance of the three aspects. This in fact constitutes an essential pledge of the credibility of the procedure instituted by the law: at present, to clearly specify the research into surface storing in the short or long terms; building the three laboratories, the authorization for which has been subject to public inquiry. And also to keep, for 2006, the largest possible choice of the geological environment. (author)

  12. Scope of current abandonment issues in the oil and gas industry

    International Nuclear Information System (INIS)

    Scott, I.F.H.

    1997-01-01

    Abandonment issues in the oil and gas industry, such as well sites, batteries, gas plants, compressor stations, and pipelines, were discussed. Responsibilities of the Canadian Association of Petroleum Producers (CAPP) for informing the Canadian public about energy and environmental issues on behalf of the upstream petroleum industry were reviewed. Industry regulators and those who have jurisdiction over the abandonment of facilities were identified. In Alberta, the main agencies are the Alberta Energy and Utilities Board, Alberta Environmental Protection, and Alberta Food and Rural Development in addition to the National Energy Board and Indian Oil and Gas Canada. At the end of 1995, 160,000 wells had been drilled in Alberta of which 60,000 are still active, 35,000 are suspended and 70,000 wells have been abandoned. The industry-financed Orphan Well Program was established to provide funds for facility abandonment, decontamination and surface reclamation costs associated with orphaned facilities. CAPP agrees that operators of oil and gas facilities must be held responsible and accountable for the abandonment of their facilities. CAPP is looking for support from government to ensure that enforcement actions limit the number of orphan facilities. tabs., figs

  13. Labour Rights Protection in Industrial Relations Issues

    Directory of Open Access Journals (Sweden)

    Eko Adi Susanto

    2015-12-01

    Full Text Available Many violations of the terms of employment at Surabaya, employment protection  and working conditions for workers who are not provided by employers to the maximum, according to the legislation in force, while the legal protection for workers constrained because of the weakness in the system of employment law, both the substance and the culture built by governments and companies. How To Cite: Susanto, E. (2015. Labour Rights Protection in Industrial Relations Issues. Rechtsidee, 2(2, 109-120. doi:http://dx.doi.org/10.21070/jihr.v2i2.78

  14. Ultrasonic nondestructive evaluation systems industrial application issues

    CERN Document Server

    Callegari, Sergio; Montisci, Augusto; Ricci, Marco; Versaci, Mario

    2015-01-01

    This book covers the practical implementation of ultrasonic NDT techniques in an industrial environment, discussing several issues that may emerge and proposing strategies for addressing them successfully.  It aims to bridge advanced academic research results and their application to industrial procedures. The topics covered in the text range from the basic operation of an ultrasonic NDT system to the simulation of the measurement operations; from the choice and generation of the signals energizing the system to the different ways of exploiting the probes and their output signals; and from quality assessment evaluation to the use of soft computing techniques for classification. Throughout the text, an effort is made to embrace a system view where the physical and technological aspects of sensing are addressed together with higher abstraction levels, such as signal and information processing. Consequently, the book aims at guiding the reader through the various tasks requested for developing a complete ultras...

  15. Performance issues for a changing electric power industry

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    Extremely cold weather created record demands for electricity in the eastern two-thirds of the United States during the week of January 16, 1994. Fuel-related problems, mostly the result of transportation constraints resulting from ice accumulation on roads and water-ways, and unexpected generating capacity outages at utilities and nonutilities resulted in demand not being met. Some utilities asked nonessential customers along with State governments and a portion of the Federal Government to shut down. Two electric control areas, the Pennsylvania-New Jersey-Maryland Interconnection (PJM) and Virginia Electric & Power Company (VEPCO), instituted rolling blackouts. This disturbance was reported widely in the press and, along with other disturbances, peaked renewed interest in the reliability of the electric power system. The renewed interest in reliability has coincided with substantial changes that are beginning to occur in the structure and competitiveness of the electric power industry. Juxtaposing the question of reliability and the issue of changing industry structure leads to the central concern of this report: What effect, if any, will the changing structure of the industry have on the reliability of the system?

  16. Occupational health issues in small-scale industries in Sri Lanka: An underreported burden.

    Science.gov (United States)

    Suraweera, Inoka K; Wijesinghe, Supun D; Senanayake, Sameera J; Herath, Hema D B; Jayalal, T B Ananda

    2016-10-17

    Work-related diseases and occupational accidents affect a significant number of workers globally. The majority of these diseases and accidents are reported from developing countries; and a large percentage of the workforce in developing countries is estimated to be employed in small-scale industries. Sri Lanka is no exception. These workers are exposed to occupational hazards and are at a great risk of developing work- related diseases and injuries. To identify occupational health issues faced by small-scale industry workers in Sri Lanka. A cross sectional study was conducted among workers in four selected small-scale industry categories in two districts of Sri Lanka. A small-scale industry was defined as a work setting with less than 20 workers. Cluster sampling using probability proportionate to size of workers was used. Eighty clusters with a cluster size of eight from each district were selected. Data was collected using a pre-tested interviewer administered questionnaire. Our study surveyed 198 industries. Headache (2.2%, 95% CI 1.5-3.1) and eye problems (2.1%, 95% CI 1.4-2.9) were the commonest general health issues detected. Back pain (4.8%, 95% CI 3.8-6.1) was the most prevalent work-related musculoskeletal pain reported. Knee pain was the second highest (4.4%, 95% CI 3.4-5.6). Most of the work-related musculoskeletal pain was either of short duration or long lasting. Work-related musculoskeletal pain was much more common than the general health issues reported. Health promotional programs at workplaces focusing ergonomics will benefit the workers at small-scale industries inSri Lanka.

  17. Solar technology and the insurance industry: Issues and applications

    Energy Technology Data Exchange (ETDEWEB)

    Deering, A.; Thornton, J. P.

    1999-07-01

    Today's insurance industry strongly emphasizes developing cost-effective hazard mitigation programs, increasing and retaining commercial and residential customers through better service, educating customers on their exposure and vulnerabilities to natural disasters, collaborating with government agencies and emergency management organizations, and exploring the use of new technologies to reduce the financial impact of disasters. Solar technology can be used in underwriting, claims, catastrophe response, loss control, and risk management. This report will address the above issues, with an emphasis on pre-disaster planning and mitigation alternatives. It will also discuss how energy efficiency and renewable technologies can contribute to reducing insurance losses and offer suggestions on how to collaborate with the utility industry and how to develop educational programs for business and consumers.

  18. Metaphors in Projects - An Overlooked X-factor

    DEFF Research Database (Denmark)

    Svejvig, Per

    2015-01-01

    Metaphors are pervasive in human thought and action, but have been an overlooked X-factor in projects and project management. This essay presents deliberate uses of metaphors classified into specific projects and frameworks for projects in order to stimulate explicit uses of metaphors in project...

  19. Environmental issues and economic performance of the coal industry in Brazil

    International Nuclear Information System (INIS)

    Santana, E.A.; Seabra, F.; Wendhausen, J.

    1996-01-01

    The purpose of this study is to investigate the main sources of inefficiency of the Brazilian coal industry. In addition, the authors examine the current and the future competitiveness of the Brazilian coal industry taking into account the effects of globalization, the modernization of the mining techniques and, most important, the environmental costs regarded under the concept of sustainable development. This paper examines some of the causes behind the alleged inefficiency of coal production and coal-electric generation, with special emphasis to environmental issues. The rest of the paper is organized as follows. Section 2 outlines a profile of the energetic potential of coal reserves in Brazil. In section 3, the authors discuss environmental restrictions and other features that can be related to the performance of the coal industry in Brazil

  20. Risk Management: An Analysis of Issues in Islamic Financial Industry (Occasional Paper)

    OpenAIRE

    Khan, Tariqullah; Ahmed, Habib

    2001-01-01

    The paper discusses a number of risk management issues of the Islamic financial industry. It outlines the risk management processes and techniques that enable financial institutions to control undesirable risks and to take benefit of the business opportunities created by the desirable ones.

  1. A review on the current issues and barriers of Industrialised Building System (IBS) adoption in Malaysia’s construction industry

    Science.gov (United States)

    Amin, M. A. Mohd; Abas, N. H.; Shahidan, S.; Rahmat, M. H.; Suhaini, N. A.; Nagapan, S.; Rahim, R. Abdul

    2017-11-01

    Malaysia considers the construction industry as one of the main contributors to its Gross Domestic Product (GDP). However, there are some unresolved issues arising from the ongoing and widespread adoption of the conventional method of construction such as the resultant fragmentation of the industry itself; delays in production and delivery time of unnecessary wastages and lack of sustainability practice. Malaysian Government has been continuously encouraging the industry to use, partly or if not wholly, the Industrialized Building System (IBS), which is considered to be an important part of sustainable construction initiative. IBS was introduced to Malaysia as the solution to issues related to dependencies of foreign workers, raising demand for affordable accommodations and improving image, quality and productivity of construction industry. However, the IBS adoption in Malaysia remains low. This paper presents the review of the current issues and barriers of IBS adoption in Malaysian construction industry.

  2. The Impact of Infrastructural Development on Nigeria's Industrial ...

    African Journals Online (AJOL)

    Nneka Umera-Okeke

    Department of Private Law,. University of ... The importance of infrastructure to the industrial sector of any economy cannot be overlooked ... with healthcare, governance, education, and accountability, as well as property rights, which are the ...

  3. “Everybody sounds the same”: Otherwise Overlooked Ideology in Perceptual Dialectolgy

    Science.gov (United States)

    Evans, Betsy E.

    2014-01-01

    When analyzing dialectology survey data, researchers usually exclude respondents who do not complete the survey as directed. It is argued here that such “unusable” responses can be considered “outlier” data and analyzed rather than be excluded, allowing otherwise overlooked language ideologies to emerge. Responses to a perceptual dialectology map survey in which 31 of the 229 respondents wrote comments on a map of Washington state, without drawing lines around perceived dialect areas as instructed, are described to illustrate this point. In the present data, ideologies such as the homogeneity of dialects and the importance of an urban/rural dichotomy surfaced. These themes are examined in terms outlined by Judith Irvine and Susan Gal in their discussion of how ideological processes are evident in language data. In addition, methodological issues regarding the presuppositions and orientation of respondents to the questionnaire itself are raised. PMID:25859054

  4. E-Business Developmental Issues in the Australian Food Industry

    Directory of Open Access Journals (Sweden)

    Mohini Singh

    2004-11-01

    Full Text Available This paper discusses e-business developmental issues in the Australian Food industry that were identified from a research project funded by the Australian Research Council. Data was gathered from interviews with 11 food organisations in the year 2000, most of which can be classified as ‘bricks and clicks’. These 11 companies were traditional businesses that had adopted e-business as a new way of doing business. The findings of the paper highlight the fact that the B2B is the predominant e-business model in the Australian Food Industry, EDI is an important foundation technology platform for developing B2B e-business, e-procurement was an important reason for adopting B2B e-business and improved supply chain management was the most important achievement from E-Business for these organizations. It also highlighted the fact e-business developed in-house with an IT department managed e-business sites better than those that outsourced the development.

  5. Current situation and issue of Industrial Accident Compensation insurance.

    Science.gov (United States)

    Kim, Inah; Rhie, Jeongbae; Yoon, Jo-Duk; Kim, Jinsoo; Won, Jonguk

    2012-05-01

    Industrial Accident Compensation Insurance (IACI) has a history of about 50 yr, and is the oldest social insurance system in Korea. After more than 20 times of revision improvements in benefits, its contents and claim systems have been upgraded. It became the protector of injured workers and their families, and at the same time became the system which could cope with both financial burden of employers and their responsibilities. However, there are some issues to be reformed to upgrade the IACI: 1) the problems in the approval system of occupational diseases, 2) quality improvement of workers' compensation medical care, 3) vocational rehabilitation and return to work, 4) workers' compensation premiums and out-of-pocket money of injured workers, 5) issues in application of IACI. Growth of IACI cannot be achieved by an effort of an individual. Efforts by workers, owners, and government, in addition to physicians and welfare professionals toward the same goal are required for the next level improvement of IACI.

  6. Impact of Fragmentation Issue in Construction Industry: An Overview

    Directory of Open Access Journals (Sweden)

    Mohd Nawi Mohd Nasrun

    2014-01-01

    Full Text Available In general, fragmentation within the construction industry arises from two areas within the traditional construction process; the construction work process where the most significant division is in the separation of the design and construction phase, and the construction structure itself. The fragmentation process in traditional contracting practice further hinders the integration of construction knowledge among contractors, diminishing the opportunity for them to influence design decisions. When design professionals fail to consider as to how a contractor would construct the designed project results in scheduling problems, delays, and disputes during the construction process. Moving towards team integration is considered a significant strategy for overcoming the issue. Accordingly, this paper discusses the fragmentation issue in more detail including its definition, and causes and effects to the construction projects. It also explores that the team integration strategy alleviates scheduling problems, and helps avoid delays and disputes during the construction process, preventing harm to overall project performance.

  7. Radiological protection, safety and security issues in the industrial and medical applications of radiation sources

    Science.gov (United States)

    Vaz, Pedro

    2015-11-01

    The use of radiation sources, namely radioactive sealed or unsealed sources and particle accelerators and beams is ubiquitous in the industrial and medical applications of ionizing radiation. Besides radiological protection of the workers, members of the public and patients in routine situations, the use of radiation sources involves several aspects associated to the mitigation of radiological or nuclear accidents and associated emergency situations. On the other hand, during the last decade security issues became burning issues due to the potential malevolent uses of radioactive sources for the perpetration of terrorist acts using RDD (Radiological Dispersal Devices), RED (Radiation Exposure Devices) or IND (Improvised Nuclear Devices). A stringent set of international legally and non-legally binding instruments, regulations, conventions and treaties regulate nowadays the use of radioactive sources. In this paper, a review of the radiological protection issues associated to the use of radiation sources in the industrial and medical applications of ionizing radiation is performed. The associated radiation safety issues and the prevention and mitigation of incidents and accidents are discussed. A comprehensive discussion of the security issues associated to the global use of radiation sources for the aforementioned applications and the inherent radiation detection requirements will be presented. Scientific, technical, legal, ethical, socio-economic issues are put forward and discussed.

  8. Future Public Policy and Ethical Issues Facing the Agricultural and Microbial Genomics Sectors of the Biotechnology Industry: A Roundtable Discussion

    Energy Technology Data Exchange (ETDEWEB)

    Diane E. Hoffmann

    2003-09-12

    On September 12, 2003, the University of Maryland School of Law's Intellectual Property and Law & Health Care Programs jointly sponsored and convened a roundtable discussion on the future public policy and ethical issues that will likely face the agricultural and microbial genomics sectors of the biotechnology industry. As this industry has developed over the last two decades, societal concerns have moved from what were often local issues, e.g., the safety of laboratories where scientists conducted recombinant DNA research on transgenic microbes, animals and crops, to more global issues. These newer issues include intellectual property, international trade, risks of genetically engineered foods and microbes, bioterrorism, and marketing and labeling of new products sold worldwide. The fast paced nature of the biotechnology industry and its new developments often mean that legislators, regulators and society, in general, must play ''catch up'' in their efforts to understand the issues, the risks, and even the benefits, that may result from the industry's new ways of conducting research, new products, and novel methods of product marketing and distribution. The goal of the roundtable was to develop a short list of the most significant public policy and ethical issues that will emerge as a result of advances in these sectors of the biotechnology industry over the next five to six years. More concretely, by ''most significant'' the conveners meant the types of issues that would come to the attention of members of Congress or state legislators during this time frame and for which they would be better prepared if they had well researched and timely background information. A concomitant goal was to provide a set of focused issues for academic debate and scholarship so that policy makers, industry leaders and regulators would have the intellectual resources they need to better understand the issues and concerns at stake. The

  9. Industrial and institutional restructuring of the Russian electricity sector: Status and issues

    International Nuclear Information System (INIS)

    Engoian, Alda

    2006-01-01

    The reform of the Russian electricity industry represents one of the largest and most technically complex post-Soviet era industrial restructurings. This paper presents the framework, status, and perspectives for the Russian electricity sector liberalisation. Uncertainties regarding the effective implementation of the reform are specifically examined. Ultimately the critical analysis of the reform questions the feasibility and adequacy of the recommended measures in the specific Russian context. Current theories fail to answer a fundamental issue, namely how to promote investment in an obsolete electrical infrastructure and, more generally, whether a pure free market model is compatible with physical constraints posed by the electricity sector. A careless deregulation of the Russian electricity system could hinder the country's stable and sustainable development, as its economy and the population's service have traditionally been closely linked to the electricity industry

  10. Industrial and institutional restructuring of the Russian electricity sector: status and issues

    International Nuclear Information System (INIS)

    Engoian, A.

    2006-01-01

    The reform of the Russian electricity industry represents one of the largest and most technically complex post-Soviet era industrial restructurings. This paper presents the framework, status, and perspectives for the Russian electricity sector liberalisation. Uncertainties regarding the effective implementation of the reform are specifically examined. Ultimately the critical analysis of the reform questions the feasibility and adequacy of the recommended measures in the specific Russian context. Current theories fail to answer a fundamental issue, namely how to promote investment in an obsolete electrical infrastructure and, more generally, whether a pure free market model is compatible with physical constraints posed by the electricity sector. A careless deregulation of the Russian electricity system could hinder the country's stable and sustainable development, as its economy and the population's service have traditionally been closely linked to the electricity industry. (author)

  11. Clean energy industries and rare earth materials: Economic and financial issues

    International Nuclear Information System (INIS)

    Baldi, Lucia; Peri, Massimo; Vandone, Daniela

    2014-01-01

    In the last few years, rare earth materials (REM) prices have experienced a strong increase due to geopolitical and sustainability issues. Financial markets could already have factored in concerns about shortages of REM supplies into clean energy companies’ valuations. We use a multifactor market model for the period January 2006 to September 2012 to analyze the impact of REM price trends – specifically dysprosium and neodymium – on six clean energy indices (NYSE–BNEF) tracking the world's most important companies in the clean energy sector. The results show that during period of price increase, there is a negative relationships between REM price changes and the stock market performance of some clean energy indices. The European clean energy index is also negatively affected, and this effect could be relevant to policy makers, considering that Europe is implementing some relevant policy actions to support the development of the clean energy industry. - Highlights: • Clean energy is an industry with a double-digit growth market rate in the last years. • Rare earth materials are a key component in the development process of this industry. • Recently REMs’ prices have skyrocketed and the clean energy industry is in turmoil. • We analyze the effect of REMs price on the stock market performances of clean industry. • We find negative relation between REMs price increase and stock market performances

  12. Myonecrosis in Sickle Cell Anemia—Overlooked and Underdiagnosed

    Directory of Open Access Journals (Sweden)

    Nishant Tageja

    2010-01-01

    Full Text Available Medical literature detailing muscular complications of sickle cell anemia is sparse and limited to a few case-reports. Features consistent with myositis and myonecrosis are often overlooked and patients are inadequately treated, leading to unforeseen complications. We report an interesting case of sickle cell myonecrosis and review the existing literature on this subject.

  13. Corrosion issues in nuclear industry today

    International Nuclear Information System (INIS)

    Cattant, F.; Crusset, D.; Feron, D.

    2008-01-01

    In the context of global warming, nuclear energy is a carbon-free source of power and so is a meaningful option for energy production without CO 2 emissions. Currently, there are more than 440 commercial nuclear reactors, accounting for about 15% of electric power generation in the world, and there has not been a major accident in over 20 years. The world's fleet of nuclear power plants is, on average, more than 20 years old. Even though the design life of a nuclear power plant is typically 30 or 40 years, it is quite feasible that many nuclear power plants will be able to operate for longer than this. The re-emergence of nuclear power today is founded on the present generation of nuclear reactors meeting the demands of extended service life, ensuring the cost competitiveness of nuclear power and matching enhanced safety requirements. Nuclear power plant engineers should be able to demonstrate such integrity and reliability of their system materials and components as to enable nuclear power plants to operate beyond their initial design life. Effective waste management is another challenge for sustainable nuclear energy today; more precisely, a solution is needed for the management of high-level and long-lived intermediate-level radioactive waste over the very long term. Most nuclear countries are currently gathering the data needed to assess the feasibility of a deep geological waste repository, including the prediction of the behaviour of materials over several thousands of years. The extended service life of nuclear power plants and the need for permanent disposal for nuclear waste are today's key issues in the nuclear industry. We focus here on the major role that corrosion plays in these two factors, and on the French approaches to these two issues. (authors)

  14. The 19th KAIF/KNS annual conference growth of nuclear industry and its current issues

    International Nuclear Information System (INIS)

    Juhn, Poong Eil

    2004-01-01

    After the president Eisenhower's 'Atoms for Peace' speech at the UN general Conference in December 1953, nuclear industry for peaceful uses of nuclear energy has been developed steadily worldwide through international co-operation and collaboration during last half a century. However, from late 1980s, in particular, after Chernobyl nuclear accident in 1986 and growing public opposition on nuclear waste management and disposal, the growth of nuclear power plants worldwide, except some Asian countries, has been slowed down. Nuclear power currently supplies about 16 % of the world's electricity. In the next 50 years, it is expected that the world energy demand will increase about two times comparing current level while electricity demand will be tripled. Therefore, the nuclear industry should be expanded significantly in the next 50 years to meet the role for 'Prosperity beyond Peace'. The main issues for nuclear industry to take this important role are to increase in economics of nuclear power, and to resolve nuclear waste management and disposal. Some of these issues have been resolved mainly through international co-operation. For example, there are significant efforts to improve economics of nuclear power. This paper reviews worldwide efforts to resolve these issues and mentions what are the remaining ones

  15. Clean Energy Industries and rare Earth Materials: Economic and Financial Issues

    OpenAIRE

    Baldi, Lucia; Peri, Massimo; Vandone, Daniela

    2013-01-01

    In the last few years Rare Earth Materials (REMs) prices have experienced a strong increase, due to geopolitical policies and sustainability issues. Provided that these materials at risk of supply disruptions are largely employed in the development of new technologies - such as clean energy industries - financial markets may already have included these concerns into clean energy companies evaluation. We use a multifactor market model for the period January 2006-September 2012 to analyse the i...

  16. Manufacturing strategy issues in selected Indian manufacturing industry

    Directory of Open Access Journals (Sweden)

    Mahender Singh

    2013-03-01

    Full Text Available This paper presents some findings of Indian manufacturing sectors viz. automobile (especially two-wheeler, tractor and general manufacturing industry. Various manufacturing strategy issues such as competitive priorities, improvement activities, and performance measures, have been identified and assessed in Indian context. Sector wise comparison of competitive priorities, improvement activities i.e. advanced manufacturing technology (AMT, integrated information systems (IIS, and advanced management systems (AMS, and performance measure, is provided. Our results showed that most of the Indian companies are still emphasizing on quality. However, automobile sector has set to compete globally with high innovation rate, faster new product development, and continuous improvement. It is also observed that Indian companies are investing more in AMS as compared to IIS and AMT. Manufacturing competence index is also computed for each sector.

  17. Overlooked issues of snakebite management: time for strategic approach.

    Science.gov (United States)

    Girish, K S; Kemparaju, K

    2011-01-01

    Snakebite is a medical emergency in many parts of the world, particularly in the temperate regions. According to 2007 World Health Organization (WHO) report, there are about 5 million snakebite incidences resulting in 2.5 million envenoming, and 125,000 deaths occur annually. Most affected are the healthy individuals like children and farming populations with resource poor settings and away from health care centers in low-income countries of Africa, Asia and Latin America. In view of this, the WHO has declared snakebite as an ignored health crisis and a tropical disease. Although the death rate has reduced markedly due to anti-venom regiment, several limitations of it offer scope for better understanding of various ignored issues. Currently, snakebite therapeutics facing plethora of scientific, technological and public health challenges, including secondary/long term complications that have not been given importance so far. Because of dearth of knowledge, venom researchers and medical practitioners from affected countries worldwide should join together to accomplish this scenario. In view of this, the present review provides a broader perspective on the possible production and application of highly effective therapeutic master anti-venom, designing master diagnostic kit and also to deal with the inefficacy of anti-venom therapy against local manifestations and secondary complications of snakebite. The review demands thorough understanding of venom pharmacology, inculcating new strategies to handle and to enhance the efficacy of snakebite management and urge the governing systems of affected countries to take steps to curtail accidental debilitation and death rate of healthy individuals due to snakebite.

  18. Pelvic floor disorders in gynecological malignancies. An overlooked problem?

    Directory of Open Access Journals (Sweden)

    Oana M. Bodean

    2018-04-01

    Full Text Available Cervical, endometrial, ovarian, vulvar, and vaginal cancers affect women of a broad age spectrum. Many of these women are still sexually active when their cancer is diagnosed. Treatment options for gynecological malignancies, such as gynecological surgery, radiation, and chemotherapy, are proven risk factors for pelvic floor dysfunction. The prevalence of urinary incontinence, fecal incontinence, and sexual dysfunction before cancer treatment is still unclear. Hypotheses have been raised in the literature that these manifestations could represent early symptoms of pelvic cancers, but most remain overlooked even in cancer surviving patients. The primary focus of therapy is always cancer eradication, but as oncological and surgical treatment options become more successful, the number of cancer survivors increases. The quality of life of patients with gynecological cancers often remains an underrated subject. Pelvic floor disorders are not consistently reported by patients and are frequently overlooked by many clinicians. In this brief review we discuss the importance of pelvic floor dysfunction in patients with gynecological malignant tumors.

  19. Overlooked density : re-thinking transportation options in suburbia, phase II.

    Science.gov (United States)

    2011-03-01

    Comprising over 9 million units in this country, suburban multifamily housing is a widespread and overlooked example of density located : within walking distance to commercial development in suburbia. This report focuses on resident demographics, att...

  20. Overlooked and underestimated? Problematic alcohol use in clients recovering from drug dependence.

    Science.gov (United States)

    Staiger, Petra K; Richardson, Ben; Long, Caroline M; Carr, Victoria; Marlatt, G Alan

    2013-07-01

    Despite recognition of the harms related to alcohol misuse and its potential to interfere substantially with sustained recovery from drug dependency, research evaluating drug treatment outcomes has not addressed the issue comprehensively. It has been overlooked possibly because treatment research has been framed according to the primary drug of choice, rather than investigating the interactions between different combinations of drugs and/or alcohol use. This paper reports on a systematic review investigating whether concurrent alcohol use could impede recovery from illicit drug use in two potential ways: first, alcohol could become a substitute addiction and/or secondly, alcohol misuse post-treatment may place an individual at risk for relapse to their primary drug problem. A systematic search of four relevant databases was undertaken to identify peer-reviewed, quantitative drug treatment outcome studies that reported alcohol use pre-, post-treatment and follow-up. The search revealed 567 papers, of which 13 were assessed as fulfilling the key inclusion criteria.The review indicated inconsistent and therefore inconclusive support for the substitution hypothesis. However, the data revealed consistent support for the hypothesis that alcohol use increases relapse to drug use. (i) The potential negative impact of alcohol misuse on drug treatment outcomes remains under-researched and overlooked; (ii) alcohol consumption post-drug treatment may increase the likelihood that an individual will relapse to their primary drug; (ii) existing evidence regarding the substitution hypothesis is inconclusive, although there was an indication that a subgroup of participants will be vulnerable to alcohol becoming the primary addiction instead of drugs. We argue that future drug treatment outcome studies need to include detailed analysis of the influence of alcohol use pre- and post-drug treatment. © 2012 The Authors, Addiction © 2012 Society for the Study of Addiction.

  1. Ethical, environmental and social issues for machine vision in manufacturing industry

    Science.gov (United States)

    Batchelor, Bruce G.; Whelan, Paul F.

    1995-10-01

    Some of the ethical, environmental and social issues relating to the design and use of machine vision systems in manufacturing industry are highlighted. The authors' aim is to emphasize some of the more important issues, and raise general awareness of the need to consider the potential advantages and hazards of machine vision technology. However, in a short article like this, it is impossible to cover the subject comprehensively. This paper should therefore be seen as a discussion document, which it is hoped will provoke more detailed consideration of these very important issues. It follows from an article presented at last year's workshop. Five major topics are discussed: (1) The impact of machine vision systems on the environment; (2) The implications of machine vision for product and factory safety, the health and well-being of employees; (3) The importance of intellectual integrity in a field requiring a careful balance of advanced ideas and technologies; (4) Commercial and managerial integrity; and (5) The impact of machine visions technology on employment prospects, particularly for people with low skill levels.

  2. Radiological protection, safety and security issues in the industrial and medical applications of radiation sources

    International Nuclear Information System (INIS)

    Vaz, Pedro

    2015-01-01

    The use of radiation sources, namely radioactive sealed or unsealed sources and particle accelerators and beams is ubiquitous in the industrial and medical applications of ionizing radiation. Besides radiological protection of the workers, members of the public and patients in routine situations, the use of radiation sources involves several aspects associated to the mitigation of radiological or nuclear accidents and associated emergency situations. On the other hand, during the last decade security issues became burning issues due to the potential malevolent uses of radioactive sources for the perpetration of terrorist acts using RDD (Radiological Dispersal Devices), RED (Radiation Exposure Devices) or IND (Improvised Nuclear Devices). A stringent set of international legally and non-legally binding instruments, regulations, conventions and treaties regulate nowadays the use of radioactive sources. In this paper, a review of the radiological protection issues associated to the use of radiation sources in the industrial and medical applications of ionizing radiation is performed. The associated radiation safety issues and the prevention and mitigation of incidents and accidents are discussed. A comprehensive discussion of the security issues associated to the global use of radiation sources for the aforementioned applications and the inherent radiation detection requirements will be presented. Scientific, technical, legal, ethical, socio-economic issues are put forward and discussed. - Highlights: • The hazards associated to the use of radioactive sources must be taken into account. • Security issues are of paramount importance in the use of radioactive sources. • Radiation sources can be used to perpetrate terrorist acts (RDDs, INDs, REDs). • DSRS and orphan sources trigger radiological protection, safety and security concerns. • Regulatory control, from cradle to grave, of radioactive sources is mandatory.

  3. What Money Can't Buy: Powerful, Overlooked Opportunities for Learning

    Science.gov (United States)

    Schmoker, Mike

    2009-01-01

    States are in fiscal funk. This means that "ambitious education initiatives" are being scuttled. The current downturn could force teachers to see how much can be accomplished by attending to some long overlooked, incontrovertibly effective actions and initiatives. In this article, the author recommends several simple fundamental changes in…

  4. The Overlooked Role of Obesity in Infertility

    Directory of Open Access Journals (Sweden)

    Safaa Al-Hasani

    2008-09-01

    Full Text Available Being either underweight or overweight can affect a woman's fertility. Irregular menstrual cycles, reduced spontaneous and assisted fertility and an increased risk of miscarriage are risks associated with obesity that are often overlooked. Excessive weight and central distribution of body fat are both related to an increased risk of normogonadotrophic anovulation. Weight loss can re-establish ovulation in obese anovulatory patients or improve their response to ovulation induction. However, even a small amount of weight loss (5% may improve fertility. Men who are overweight or obese have significantly lower sperm counts than men of normal weight.

  5. Up in the tree--the overlooked richness of bryophytes and lichens in tree crowns.

    Science.gov (United States)

    Boch, Steffen; Müller, Jörg; Prati, Daniel; Blaser, Stefan; Fischer, Markus

    2013-01-01

    Assessing diversity is among the major tasks in ecology and conservation science. In ecological and conservation studies, epiphytic cryptogams are usually sampled up to accessible heights in forests. Thus, their diversity, especially of canopy specialists, likely is underestimated. If the proportion of those species differs among forest types, plot-based diversity assessments are biased and may result in misleading conservation recommendations. We sampled bryophytes and lichens in 30 forest plots of 20 m × 20 m in three German regions, considering all substrates, and including epiphytic litter fall. First, the sampling of epiphytic species was restricted to the lower 2 m of trees and shrubs. Then, on one representative tree per plot, we additionally recorded epiphytic species in the crown, using tree climbing techniques. Per tree, on average 54% of lichen and 20% of bryophyte species were overlooked if the crown was not been included. After sampling all substrates per plot, including the bark of all shrubs and trees, still 38% of the lichen and 4% of the bryophyte species were overlooked if the tree crown of the sampled tree was not included. The number of overlooked lichen species varied strongly among regions. Furthermore, the number of overlooked bryophyte and lichen species per plot was higher in European beech than in coniferous stands and increased with increasing diameter at breast height of the sampled tree. Thus, our results indicate a bias of comparative studies which might have led to misleading conservation recommendations of plot-based diversity assessments.

  6. Intervening: Managerial Issues and Challenges in an Educational Management Development Program.

    Science.gov (United States)

    Barrilleaux, Louis E.; Schermerhorn, John R., Jr.

    The literature on intervention theory tends to overlook the pragmatic managerial issues and challenges of intervening. This paper analyzes the formative period of a school management development program to establish crucial differences between the program director's espoused theory and the actual experience of the intervention. These differences…

  7. Environmental issues facing the oil industry

    International Nuclear Information System (INIS)

    Skea, Jim

    1992-01-01

    Environmental policies and regulations are having profound effects on the oil industry. The industry is affected by controls on both its production and processing activities and on the use of its own products. The environmental impacts of upstream activities, epitomized by the Exxon Valdez accident, are leading to more expensive tanker designs. Oil markets can be changed by sulphur controls driven by concern about acid rain and new requirements in the USA to change gasoline specifications in order to reduce urban smog. The problem of climate change and CO 2 emissions poses even more fundamental challenges to the oil industry, with the prospect of reduced markets in the longer term. (author)

  8. Negotiating Values in the Creative Industries

    DEFF Research Database (Denmark)

    together a team of distinguished scholars to examine art fairs, biennales, auctions, book fairs, television programming markets, film festivals, animation film festivals, country music festivals, fashion weeks, wine classifications and wine-tasting events. This diverse set of studies shows that such events......Fairs, festivals and competitive events play a crucial role in the creative industries; yet their significance has been largely overlooked. This book explores the role of such events through a series of studies that include some of the most iconic fairs and festivals in the world. It brings...... perspective on the role and importance of fairs, festivals and competitive events in the creative industries....

  9. The relationship between the oil industry and municipalities in Saskatchewan

    International Nuclear Information System (INIS)

    Gerecke, D.

    1997-01-01

    The relationship between oil companies and rural municipalities in Saskatchewan and the recent changes to Saskatchewan's property tax assessment scheme were discussed. There are approximately 300 rural municipalities in Saskatchewan, each having its own bylaws and policies. The bylaws and policies dealing with roads and fees are the ones which affect the oil companies the most. From the industry's point of view, the biggest problem is that there is no consistency from one rural municipality to another regarding the rules that oil companies must follow. The Rural Municipalities Act and the Planning and Development Act are the sources of jurisdiction for rural municipalities. These acts allow municipalities to pass zoning bylaws for land use and development restrictions that could prevent or restrict the drilling of wells, the installation of road approaches, the crossing of roads with a pipeline or gas line, and waste disposal, among others. Examples of how the rural municipalities in Saskatchewan are dealing with the oil industry are presented. One factor that rural municipalities sometimes overlook is that trying to coexist peacefully with the oil industry frequently encourages development and keeps taxes down. The property tax reassessment based on the 1989 Rural Municipality Act, the impact of reassessment on rural municipalities, appeals against assessment, 1997 changes to the appeal rules, and major appeal issues in 1997 were also reviewed

  10. Alcohol research and the alcoholic beverage industry: issues, concerns and conflicts of interest.

    Science.gov (United States)

    Babor, Thomas F

    2009-02-01

    Using terms of justification such as 'corporate social responsibility' and 'partnerships with the public health community', the alcoholic beverage industry (mainly large producers, trade associations and 'social aspects' organizations) funds a variety of scientific activities that involve or overlap with the work of independent scientists. The aim of this paper is to evaluate the ethical, professional and scientific challenges that have emerged from industry involvement in alcohol science. Source material came from an extensive review of organizational websites, newspaper articles, journal papers, letters to the editor, editorials, books, book chapters and unpublished documents. Industry involvement in alcohol science was identified in seven areas: (i) sponsorship of research funding organizations; (ii) direct financing of university-based scientists and centers; (iii) studies conducted through contract research organizations; (iv) research conducted by trade organizations and social aspects/public relations organizations; (v) efforts to influence public perceptions of research, research findings and alcohol policies; (vi) publication of scientific documents and support of scientific journals; and (vii) sponsorship of scientific conferences and presentations at conferences. While industry involvement in research activities is increasing, it constitutes currently a rather small direct investment in scientific research, one that is unlikely to contribute to alcohol science, lead to scientific breakthroughs or reduce the burden of alcohol-related illness. At best, the scientific activities funded by the alcoholic beverage industry provide financial support and small consulting fees for basic and behavioral scientists engaged in alcohol research; at worst, the industry's scientific activities confuse public discussion of health issues and policy options, raise questions about the objectivity of industry-supported alcohol scientists and provide industry with a

  11. Tobacco industry issues management organizations: Creating a global corporate network to undermine public health

    Science.gov (United States)

    McDaniel, Patricia A; Intinarelli, Gina; Malone, Ruth E

    2008-01-01

    Background The global tobacco epidemic claims 5 million lives each year, facilitated by the ability of transnational tobacco companies to delay or thwart meaningful tobacco control worldwide. A series of cross-company tobacco industry "issues management organizations" has played an important role in coordinating and implementing common strategies to defeat tobacco control efforts at international, national, and regional levels. This study examines the development and enumerates the activities of these organizations and explores the implications of continuing industry cooperation for global public health. Methods Using a snowball sampling strategy, we collected documentary data from tobacco industry documents archives and assembled them into a chronologically organized case study. Results The International Committee on Smoking Issues (ICOSI) was formed in 1977 by seven tobacco company chief executives to create common anti-tobacco control strategies and build a global network of regional and national manufacturing associations. The organization's name subsequently changed to INFOTAB. The multinational companies built the organization rapidly: by 1984, it had 69 members operating in 57 countries. INFOTAB material, including position papers and "action kits" helped members challenge local tobacco control measures and maintain tobacco-friendly environments. In 1992 INFOTAB was replaced by two smaller organizations. The Tobacco Documentation Centre, which continues to operate, distributes smoking-related information and industry argumentation to members, some produced by cross-company committees. Agro-Tobacco Services, and now Hallmark Marketing Services, assists the INFOTAB-backed and industry supported International Tobacco Growers Association in advancing claims regarding the economic importance of tobacco in developing nations. Conclusion The massive scale and scope of this industry effort illustrate how corporate interests, when threatened by the globalization of

  12. Tobacco industry issues management organizations: creating a global corporate network to undermine public health.

    Science.gov (United States)

    McDaniel, Patricia A; Intinarelli, Gina; Malone, Ruth E

    2008-01-17

    The global tobacco epidemic claims 5 million lives each year, facilitated by the ability of transnational tobacco companies to delay or thwart meaningful tobacco control worldwide. A series of cross-company tobacco industry "issues management organizations" has played an important role in coordinating and implementing common strategies to defeat tobacco control efforts at international, national, and regional levels. This study examines the development and enumerates the activities of these organizations and explores the implications of continuing industry cooperation for global public health. Using a snowball sampling strategy, we collected documentary data from tobacco industry documents archives and assembled them into a chronologically organized case study. The International Committee on Smoking Issues (ICOSI) was formed in 1977 by seven tobacco company chief executives to create common anti-tobacco control strategies and build a global network of regional and national manufacturing associations. The organization's name subsequently changed to INFOTAB. The multinational companies built the organization rapidly: by 1984, it had 69 members operating in 57 countries. INFOTAB material, including position papers and "action kits" helped members challenge local tobacco control measures and maintain tobacco-friendly environments. In 1992 INFOTAB was replaced by two smaller organizations. The Tobacco Documentation Centre, which continues to operate, distributes smoking-related information and industry argumentation to members, some produced by cross-company committees. Agro-Tobacco Services, and now Hallmark Marketing Services, assists the INFOTAB-backed and industry supported International Tobacco Growers Association in advancing claims regarding the economic importance of tobacco in developing nations. The massive scale and scope of this industry effort illustrate how corporate interests, when threatened by the globalization of public health, sidestep competitive

  13. Tobacco industry issues management organizations: Creating a global corporate network to undermine public health

    Directory of Open Access Journals (Sweden)

    Malone Ruth E

    2008-01-01

    Full Text Available Abstract Background The global tobacco epidemic claims 5 million lives each year, facilitated by the ability of transnational tobacco companies to delay or thwart meaningful tobacco control worldwide. A series of cross-company tobacco industry "issues management organizations" has played an important role in coordinating and implementing common strategies to defeat tobacco control efforts at international, national, and regional levels. This study examines the development and enumerates the activities of these organizations and explores the implications of continuing industry cooperation for global public health. Methods Using a snowball sampling strategy, we collected documentary data from tobacco industry documents archives and assembled them into a chronologically organized case study. Results The International Committee on Smoking Issues (ICOSI was formed in 1977 by seven tobacco company chief executives to create common anti-tobacco control strategies and build a global network of regional and national manufacturing associations. The organization's name subsequently changed to INFOTAB. The multinational companies built the organization rapidly: by 1984, it had 69 members operating in 57 countries. INFOTAB material, including position papers and "action kits" helped members challenge local tobacco control measures and maintain tobacco-friendly environments. In 1992 INFOTAB was replaced by two smaller organizations. The Tobacco Documentation Centre, which continues to operate, distributes smoking-related information and industry argumentation to members, some produced by cross-company committees. Agro-Tobacco Services, and now Hallmark Marketing Services, assists the INFOTAB-backed and industry supported International Tobacco Growers Association in advancing claims regarding the economic importance of tobacco in developing nations. Conclusion The massive scale and scope of this industry effort illustrate how corporate interests, when

  14. Up in the tree--the overlooked richness of bryophytes and lichens in tree crowns.

    Directory of Open Access Journals (Sweden)

    Steffen Boch

    Full Text Available Assessing diversity is among the major tasks in ecology and conservation science. In ecological and conservation studies, epiphytic cryptogams are usually sampled up to accessible heights in forests. Thus, their diversity, especially of canopy specialists, likely is underestimated. If the proportion of those species differs among forest types, plot-based diversity assessments are biased and may result in misleading conservation recommendations. We sampled bryophytes and lichens in 30 forest plots of 20 m × 20 m in three German regions, considering all substrates, and including epiphytic litter fall. First, the sampling of epiphytic species was restricted to the lower 2 m of trees and shrubs. Then, on one representative tree per plot, we additionally recorded epiphytic species in the crown, using tree climbing techniques. Per tree, on average 54% of lichen and 20% of bryophyte species were overlooked if the crown was not been included. After sampling all substrates per plot, including the bark of all shrubs and trees, still 38% of the lichen and 4% of the bryophyte species were overlooked if the tree crown of the sampled tree was not included. The number of overlooked lichen species varied strongly among regions. Furthermore, the number of overlooked bryophyte and lichen species per plot was higher in European beech than in coniferous stands and increased with increasing diameter at breast height of the sampled tree. Thus, our results indicate a bias of comparative studies which might have led to misleading conservation recommendations of plot-based diversity assessments.

  15. Biota: Providing often-overlooked connections among freshwater systems

    Science.gov (United States)

    Mushet, David M.; Christensen, Jay R.; Bennett, Michah; Alexander, Laurie C.

    2017-01-01

    When we think about connections in and among aquatic systems, we typically envision clear headwater streams flowing into downstream rivers, river floodwaters spilling out onto adjacent floodplains, or groundwater connecting wetlands to lakes and streams. However, there is another layer of connectivity moving materials among freshwater systems, one with connections that are not always tied to downgradient flows of surface waters and groundwater. These movements are those of organisms, key components of virtually every freshwater system on the planet. In their movements across the landscape, biota connect aquatic systems in often-overlooked ways.

  16. Implementation of the HNS Convention in the LNG Industry: Singularities, Stakes, Issues and GIIGNL Proposed Solutions

    International Nuclear Information System (INIS)

    2008-01-01

    The International Group of Liquefied Natural Gas Importers (GIIGNL) is a non-profit organization founded in December of 1971. It is composed of 56 member companies from 18 different countries across the world and involved in the importation of Liquefied Natural Gas. The main objective of the GIIGNL is to promote the development of activities related to LNG: purchasing, importing, processing, transportation, handling, re-gasification and various uses of LNG. For this purpose, the GIIGNL is particularly involved in promoting the state-of-the art technology in the LNG industry, in communicating about the economic fundamentals of the industry, in enhancing facility operations, in diversifying contractual techniques, and in developing industry positions to be taken in international agencies. As a member of the IOPC Fund since June 2007, the GIIGNL prepared this LNG overview in order to offer a better understanding to state delegations about this specific product and its market and to contribute to the debate on the implementation of the HNS Convention. the first chapter constitutes an introduction to the LNG Industry: presentation of an LNG Chain, overview of the global LNG trade and its growth rate, type of contracts, LNG tankers and technical transportation constraints, liquefaction and re-gasification plants around the world. The second chapter focuses on some singularities of the LNG industry that differentiate LNG from other Hazardous and Noxious Substances: LNG, a clean and unique product and activity, high standards and firm regulations concerning security and maritime safety, high level of investment required for an LNG chain, DES and FOB, the fundamental Incoterms of LNG sales and purchase. The third chapter presents the HNS Convention as potentially applicable to the LNG market: a two tier compensation regime - a new perspective for the LNG industry, a potential impact on LNG sales and purchase agreements, the importance of global HNS ratification within LNG

  17. 2011 drug packaging review: too many dangers and too many patients overlooked.

    Science.gov (United States)

    2012-05-01

    Every year, Prescrire's analysis of drug packaging confirms the importance of taking packaging into account in assessing a drug's harm-benefit balance. Safe, tried and true options are available, yet the quality of most of the drug packaging Prescrire examined in 2011 left much to be desired. Few of the packaging items examined help prevent medication errors and many actually increase the risks: misleading and confusing labelling, dosing devices that create a risk of overdose, bottles without a child-proof cap, and inadequate or dangerous patient information leaflets. Umbrella brands continue to expand and are a potential source of medication errors. Some patients are at greater risk: the patient leaflets for NSAIDs endanger pregnant women and their unborn babies; children are insufficiently protected by paediatric packaging and are at risk due to the lack of child-proof caps on too many bottles. The raft of regulatory measures taken by the French drug regulatory agency (Afssaps) in the aftermath of the Mediator disaster overlooked the importance of packaging. Until drug regulatory agencies tackle the vast issue of drug packaging, it is up to healthcare professionals to protect patients from harm.

  18. Industrial Accidents Triggered by Natural Hazards: an Emerging Risk Issue

    Science.gov (United States)

    Renni, Elisabetta; Krausmann, Elisabeth; Basco, Anna; Salzano, Ernesto; Cozzani, Valerio

    2010-05-01

    Natural disasters such as earthquakes, tsunamis, flooding or hurricanes have recently and dramatically hit several countries worldwide. Both direct and indirect consequences involved the population, causing on the one hand a high number of fatalities and on the other hand so relevant economical losses that the national gross product may be affected for many years. Loss of critical industrial infrastructures (electricity generation and distribution, gas pipelines, oil refineries, etc.) also occurred, causing further indirect damage to the population. In several cases, accident scenarios with large releases of hazardous materials were triggered by these natural events, causing so-called "Natech events", in which the overall damage resulted from the simultaneous consequences of the natural event and of the release of hazardous substances. Toxic releases, large fires and explosions, as well as possible long-term environmental pollution, economical losses, and overloading of emergency systems were recognised by post-event studies as the main issues of these Natech scenarios. In recent years the increasing frequency and severity of some natural hazards due to climate change has slowly increased the awareness of Natech risk as an emerging risk among the stakeholders. Indeed, the iNTeg-Risk project, co-funded by the European Commission within the 7th Framework Program specifically addresses these scenarios among new technological issues on public safety. The present study, in part carried out within the iNTeg-Risk project, was aimed at the analysis and further development of methods and tools for the assessment and mitigation of Natech accidents. Available tools and knowledge gaps in the assessment of Natech scenarios were highlighted. The analysis mainly addressed the potential impact of flood, lightning and earthquake events on industrial installations where hazardous substances are present. Preliminary screening methodologies and more detailed methods based on

  19. Effects of industrial noise on wildlife : issues and challenges in Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Burke, D.; Lapka, S. [Alberta Energy and Utilities Board, Calgary, AB (Canada)

    2007-07-01

    The effects of noise from industrial activities on wildlife was examined with particular reference to the potential impacts of noise on caribou and grizzly bears from the Mackenzie Gas pipeline project. In Alberta, environmental noise requirements for oil and gas production facilities are outlined in the Alberta Energy and Utilities Board (EUB) Noise Control Directive 038. The requirements provide protection for human receptors, but not for wildlife. In order to ensure accurate assessments of the effects that industrial noise is having on wildlife, appropriate study methods must be developed to identify, quantify, and assess wildlife responses to noise. Without this knowledge, noise level thresholds for wildlife species cannot be established. A literature review was presented to demonstrate the range of published information on noise effects on wildlife and to highlight information that is relevant for the development of noise criteria for wildlife. It was concluded that wildlife noise thresholds are unknown, evidence for habituation to industrial facilities is limited, and long-term effects are generally unknown. Preliminary studies do not show any clear indication that observed reactions of wild animals are in response to noise. As such, development of regulatory criteria for wildlife noise control is not recommended at this time. The EUB will continue to keep up to date in wildlife related noise issues and will maintain the existing philosophy to limit noise to 5dB above ambient and to control dBA levels at 1500 m from facility fence lines. 57 refs., 1 fig.

  20. Environmental contamination and hospital-acquired infection: factors that are easily overlooked.

    Science.gov (United States)

    Beggs, C; Knibbs, L D; Johnson, G R; Morawska, L

    2015-10-01

    There is an ongoing debate about the reasons for and factors contributing to healthcare-associated infection (HAI). Different solutions have been proposed over time to control the spread of HAI, with more focus on hand hygiene than on other aspects such as preventing the aerial dissemination of bacteria. Yet, it emerges that there is a need for a more pluralistic approach to infection control; one that reflects the complexity of the systems associated with HAI and involves multidisciplinary teams including hospital doctors, infection control nurses, microbiologists, architects, and engineers with expertise in building design and facilities management. This study reviews the knowledge base on the role that environmental contamination plays in the transmission of HAI, with the aim of raising awareness regarding infection control issues that are frequently overlooked. From the discussion presented in the study, it is clear that many unknowns persist regarding aerial dissemination of bacteria, and its control via cleaning and disinfection of the clinical environment. There is a paucity of good-quality epidemiological data, making it difficult for healthcare authorities to develop evidence-based policies. Consequently, there is a strong need for carefully designed studies to determine the impact of environmental contamination on the spread of HAI. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  1. Alarm systems in the nuclear industry - survey of the working situation and identification of future research issues

    International Nuclear Information System (INIS)

    Joensson, Anna; Osvalder, Anna-Lisa; Holmstroem, Conny; Dahlman, Sven

    2004-01-01

    Safety issues are important in the control of industrial processes. An essential part for interpreting and avoiding hazardous situations is the alarm system and its design. To increase the knowledge and to develop new design solutions this doctoral project was initiated. The work has been divided into three stages and this paper presents the results of the first stage. The objective of stage one was to investigate how operators in both nuclear and non-nuclear plants work. A comparison between different branches of industry was also performed. From these results a future research issue has been identified. The methods used were observations, interviews and a literature study. The results showed that the operators are satisfied with the performance of the alarm system during normal operating conditions. However, several problems could also be identified but most of them are already well-known in the nuclear industry. Since these problems are well known but still exist, this result contributes to the basic hypothesis that a theoretical basis is lacking for the design of the alarm system. The proposed issue for forthcoming work is therefore to collect and compile existing knowledge about the human information processing and alarm systems, and combine the knowledge from these areas. With a better understanding of the relation between these areas it is possible to develop new design solutions which are better adapted to the human capabilities and limitations. This would support operator performance which in turn increases plant performance and safety. (Author)

  2. The Revolution in Banking and the Financial Services Industry. Series on Public Issues No. 11.

    Science.gov (United States)

    Fraser, Donald R.

    It is the premise of this booklet, one of a series intended to apply economic principles to major social and political issues of the day, that a revolution in the banking and financial services industry is altering not only the fundamental nature of the services offered but the character of the organizations themselves. The purpose of the essay is…

  3. ATTITUDES OF PEOPLE IN THE THAI CONSTRUCTION INDUSTRY SECTOR ON ISSUES RELATED TO DELAY IN THE APPROVAL OF SUBMITTALS

    Directory of Open Access Journals (Sweden)

    Visuth Chovichien

    2011-10-01

    Full Text Available This study investigated attitudes in the Thai construction industry sector towards 21 issues related to “delay in the approval of submittals” that may initiate conflicts among various parties. Knowledge gained from this study can be applied to the analyses of the completeness and appropriateness of contract conditions and to improve contract drafting. The attitudes of the majority of people in the industry towards several issues related to the time frame for the approval of submittals, compensation for cost increases and profit losses, and time frames for notifications of delayed approval and claim submission were found to be inconsistent with existing conditions in standard contracts. Various issues that are not covered in the standard contract forms, such as the time frame for providing reminders and the types of time loss and direct costs that can be claimed, were also found to have high tendencies to initiate conflicts between contracting parties. Finally, we also found that the organisational affiliation of the respondents (i.e., employer or contractor influenced their attitudes towards some, but not all, contractual issues.

  4. Iron, Oil, and Emeryville: Resource Industrialization and Metropolitan Expansion in the San Francisco Bay Area, 1850-1900

    OpenAIRE

    Lunine, Seth

    2013-01-01

    Scholars have largely overlooked the formative role of industry in both California's economic development and the San Francisco Bay Area's metropolitan expansion during the late nineteenth century. Beginning in the early 1880s, leading firms in San Francisco's specialized industries, such as the iron and chemicals sectors, dispersed to the metropolitan periphery. This process of industrial suburbanization created an integrative metropolitan economy, as well as individual suburbs. In this di...

  5. Eco-industrial initiatives in Asia : issues and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Chiu, A.S.F. [Industrial Ecology Asia Network, (China)

    2002-07-01

    This Power Point presentation discusses the impact of industry urban-suburban relocation. This relocation to industrial zones is on the rise in Asia, where there are now approximately 4,000 industrial estates, resulting from export-oriented businesses, cluster-based activities and collective management systems. Eco-industrial parks are zones that promote sustainable development through the combined benefits of environmental, social and economic initiatives. Eco-industrial parks enact environmental management laws and initiate eco-industrial development projects. Asia is diverse in access to natural resources, economics, politics, and level of development and access to natural resources. The paper describes how eco-business and a recycling-oriented economic society is being adopted in countries in Asia including China, Japan, Thailand, Philippines, Indonesia, Malaysia, Vietnam and India. tabs., figs.

  6. Does a Simple Cope's Rule Mechanism Overlook Predators?

    International Nuclear Information System (INIS)

    Penteriani, V.; Kenward, R.

    2007-01-01

    The Copes rule predicts a tendency for species to evolve towards an increase in size. Recently, it has been suggested that such a tendency is due to the fact that large body sizes provide a general increase in individual fitness. Here we highlight evidence that predator species do not always fit the large-size = high-fitness mechanism for Copes rule. Given the specific requirements of predators and the complexity of prey-predator relationships, any analysis that does not take into account all animal groups may overlook a significant portion of evolutive trends. Generalisations may not be possible regardless of taxa.

  7. Economic structure and performance of forest-based industries

    International Nuclear Information System (INIS)

    O'Laughlin, J.

    1989-01-01

    This paper reports on the economic structure, conduct, and performance of industries dependent on the nation's forests that are topics of special importance for research. A major challenge to research involving industrial organization of forest-based industries is to link descriptions of structure, conduct, and industrial performance in ways that facilitate public and private policy making. Not to be overlooked is the need to continue efforts to monitor changes in structure and conduct dimensions at the national level and to conduct baseline studies of industry structure-conduct-performance at regional, state, and local levels. Specifically needed is research that will improve understanding of restructuring within the wood-based industry; definitions of the wood-based industry and segments thereof; linkages between structure and regional economic development; timberland as a managerial and economic variable; structural consequences of technological innovations; corporate strategies as related to performance; structural dimensions in an international setting; and structure and performance of nonwood-based forest industries. Economics research focused in such directions will go far toward improving the manner in which the nation's many forest industries organize and conduct their activities

  8. Up in the Tree – The Overlooked Richness of Bryophytes and Lichens in Tree Crowns

    Science.gov (United States)

    Boch, Steffen; Müller, Jörg; Prati, Daniel; Blaser, Stefan; Fischer, Markus

    2013-01-01

    Assessing diversity is among the major tasks in ecology and conservation science. In ecological and conservation studies, epiphytic cryptogams are usually sampled up to accessible heights in forests. Thus, their diversity, especially of canopy specialists, likely is underestimated. If the proportion of those species differs among forest types, plot-based diversity assessments are biased and may result in misleading conservation recommendations. We sampled bryophytes and lichens in 30 forest plots of 20 m × 20 m in three German regions, considering all substrates, and including epiphytic litter fall. First, the sampling of epiphytic species was restricted to the lower 2 m of trees and shrubs. Then, on one representative tree per plot, we additionally recorded epiphytic species in the crown, using tree climbing techniques. Per tree, on average 54% of lichen and 20% of bryophyte species were overlooked if the crown was not been included. After sampling all substrates per plot, including the bark of all shrubs and trees, still 38% of the lichen and 4% of the bryophyte species were overlooked if the tree crown of the sampled tree was not included. The number of overlooked lichen species varied strongly among regions. Furthermore, the number of overlooked bryophyte and lichen species per plot was higher in European beech than in coniferous stands and increased with increasing diameter at breast height of the sampled tree. Thus, our results indicate a bias of comparative studies which might have led to misleading conservation recommendations of plot-based diversity assessments. PMID:24358373

  9. Regulatory issues associated with exclusion, exemption, and clearance related to the mining and minerals processing industries

    International Nuclear Information System (INIS)

    Metcalf, P.; Woude, S. van der; Keenan, N.; Guy, S.

    1997-01-01

    The concepts of exclusion, exemption and clearance have been established in international recommendations and, standards for radiation protection and the management of radioactive waste in recent years. The consistent application of these concepts has given rise to various problems in different spheres of use. This is particularly the case in the mining and minerals processing industries dealing with materials exhibiting elevated concentrations of naturally occurring radionuclides. This paper takes the South African mining industry as an example and highlights some of the issues that have arisen in applying these concepts within a regulatory control regime. (author)

  10. Toward a Greater Discourse: Issues in Religious Archives

    Directory of Open Access Journals (Sweden)

    Robert Presutti

    2010-06-01

    Full Text Available The topic of religious archives, a catalyst of much discussion in archival literature, has traditionally been overlooked within the discourse of the American Theological Library Association (ATLA. This essay provides a survey analysis of three pertinent issues in religious archives with the intention of generating a wider discussion on religious archives within ATLA. These issues include the role of graduate archival education, the effects of religious faith on both the archival record and the individual archivist, and the idea of a theology of archives. An extended review of the contributions of James O’Toole to the discussion of religious archives is utilized.

  11. Upstream oil and gas industry options paper : report of the upstream oil and gas working group of the Industry Issues Table to the National Climate Change Secretariat

    International Nuclear Information System (INIS)

    1999-09-01

    The Canadian Association of Petroleum Producers (CAPP) has coordinated the efforts of the upstream oil and natural gas industry to draft a foundation paper to provide data on industry greenhouse gas (GHG) emissions and actions. This paper is a technical piece targeted at government officials and stakeholders involved in the National Climate Change Secretariat process. The paper also outlines the context for considering policies aimed at reducing oil and gas industry emissions on climate change. The 6 key messages that CAPP wanted to emphasize in this paper were: (1) Canada's situation is very different from that of the U.S. and most other industrial countries, (2) GHG emissions are primarily an end-use consumption issue, (3) the climate change issue and the Kyoto Protocol present a major uncertainty that could undermine Canadian oil and natural gas development opportunities, (4) Canada should not be penalised by its growth of oil and natural gas resources, (5) the ability to reduce emissions by changing production technology is limited because large reductions in Canadian upstream emissions would only mean a shift of production to other countries which would not help to reduce global emissions, and (6) Canada should focus on promoting cost-effective action, research and development and international flexibility, and ensure that recognition is given to those companies that reduce emissions. tabs., figs

  12. A bilateral and multi-issue negotiation framework to support a supply chain of construction industry

    Directory of Open Access Journals (Sweden)

    Fernando Schramm

    2013-12-01

    Full Text Available Any interaction involving individuals, whose objectives are conflicting with each other, may establish a negotiation process. In a negotiation, each party should develop his/her own strategy and, normally, a win-lose vision is frequently adopted. The main consequence of this behavior is a result, in which both parties lose, especially when the negotiation involves more than one aspect, such as negotiations resulting from purchases of material for construction industry, where aspects like price, quality and lead-time should be considered. Most of the negotiation involving construction industry adopts a win-lose vision; and, commonly, only the issue price is considered. The goal of this paper is to propose a framework to support negotiations between two parties (buyer and seller in the supply chain of construction industry. The combination of a win-win strategy with a multicriteria analysis produces a best compromise solution for both parties. A simulation of negotiation using realistic data is presented.

  13. Applying industrial symbiosis to chemical industry: A literature review

    Science.gov (United States)

    Cui, Hua; Liu, Changhao

    2017-08-01

    Chemical industry plays an important role in promoting the development of global economy and human society. However, the negative effects caused by chemical production cannot be ignored, which often leads to serious resource consumption and environmental pollution. It is essential for chemical industry to achieve a sustainable development. Industrial symbiosis is one of the key topics in the field of industrial ecology and circular economy, which has been identified as a creative path leading to sustainability. Based on an extensively searching for literatures on linking industrial symbiosis with chemical industry, this paper aims to review the literatures which involves three aspects: (1) economic and environmental benefits achieved by chemical industry through implementing industrial symbiosis, (2) chemical eco-industrial parks, (3) and safety issues for chemical industry. An outlook is also provided. This paper concludes that: (1) chemical industry can achieve both economic and environmental benefits by implementing industrial symbiosis, (2) establishing eco-industrial parks is essential for chemical industry to implement and improve industrial symbiosis, and (3) there is a close relationship between IS and safety issues of chemical industry.

  14. Ocean Sustainability Issues Are Focus of Industry Gathering

    Science.gov (United States)

    Showstack, Randy

    2013-05-01

    How can industry operate in the oceans sustainably? Is there a broadly agreed upon definition of sustainability? How can industry and others deal with conflicting uses in the oceans? These were among the questions explored at a recent ocean industry leadership conference that brought together several hundred participants from business, nongovernmental organizations, and governments from around the world.

  15. Supply Chain Management on IBS Implementation in Klang Valley Construction Industry: Challenges and Issues

    Science.gov (United States)

    Azrizal Fauzi, Mohd; Hasim, Sulaiman; Awang, Anizah; Ridzuan, Ahmad Ruslan Mohd; Nur Yunus, Juzailah

    2017-12-01

    Industrialized Building System (IBS) is a system where the components of the building are manufactured in a factory and it will be transported to the site to form the structures. The supply chain management (SCM) is a system where the delivery flows of the IBS products from manufacturers to the site. The aim of this research is to identify the major challenges and to analyze the issues on IBS implementation in SCM in Klang Valley from the manufacturers perspective. The methodology used in this paper is based on primary data through questionnaire and interview. Questionnaires were sent to the Manufacturers. It can be concluded that this paper attempts to present more on the challenges and issues that those companies of manufacturers faced during their success journey in finding integration in their supply chain. The main contributions of this paper are integrating all the supply chain integration challenges and issues on IBS. Therefore, these contributions will be helpful for the organization of manufacturers and IBS players that establish the integration in their SCM.

  16. Fitness for duty in the nuclear power industry: A review of technical issues

    International Nuclear Information System (INIS)

    Moore, C.; Barnes, V.; Hauth, J.

    1989-05-01

    This report presents information gathered and analyzed in support of the US Nuclear Regulatory Commission's (NRC's) efforts to develop a rule that will ensure that workers with unescorted access to protected areas of nuclear power plants are fit for duty. This report supplements information previously published in NUREG/CR-5227, Fitness for Duty in the Nuclear Power Industry: A Review of Technical Issues (Barnes et al., 1988). The primary potential fitness-for-duty concern addressed in both of these reports is impairment caused by substance abuse, although other fitness concerns are discussed. This report addresses issues pertaining to workers' use and misuse of alcohol, prescription drugs, and over-the-counter drugs as fitness-for-duty concerns; responds to several questions raised by NRC Commissioners; discusses subversion of the chemical testing process and methods of preventing such subversion; and examines concerns about the urinalysis cutoff levels used when testing for marijuana metabolites, amphetamines, and phencyclidine

  17. Energy's role in industrial competitiveness

    International Nuclear Information System (INIS)

    1993-01-01

    At a conference on the role of energy in industrial competitiveness, papers were presented on the energy consumer's perspective on energy issues in the mineral and food industries, global perspectives on the role of energy in industrial competitiveness, a supplier's perspective on energy issues in the oil/gas and electric industries, perspectives on environmental issues including climate change, and international partnerships for industrial competitiveness, notably in the former Soviet Union and eastern Europe. Separate abstracts have been prepared for 15 papers from this conference

  18. Identification issues in forward-looking models estimated by GMM, with an application to the Phillips curve

    NARCIS (Netherlands)

    Mavroeidis, S.

    2005-01-01

    Limited-information methods are commonly used to estimate forwardlooking models with rational expectations, such as the "New Keynesian Phillips Curve" of Galí and Gertler (1999). In this paper, we address issues of identification that have been overlooked due to the incompleteness of the

  19. Development of regulatory technologies of key issues of radiation sources in the medical and industrial fields

    International Nuclear Information System (INIS)

    Lee, Jae Seong; Kim, Byung Soo; Ku, Bon Chul

    2006-08-01

    The aim of this research is to provide with rational bases to address the key issues raising up during the expansion of RI/RG usage in the medical and industrial fields, thus eventually contribute to enhancing the effectiveness of national regulatory systems. Related key issues that are introduced in the medical and industrial fields are analyzed and some outcomes are produced. The following results are attained. - Estimation Methodology Development of Regulatory Effects for the Use of Radioactive Substances, - Survey on Domestic Status of Nuclear Materials and Review on Domestic/Foreign Regulatory System for Nuclear Materials Regulation, - Comparative Analysis of KSTAR and Fusion Facilities of Advanced Countries, - Radiological Characteristics of Proton Therapy and Analysis of Foreign Cases and Systems, - Detection and Safety Analysis of Leak Radiation of High Energy Medical Generators, - Survey and Analysis on Usage and Requirements of Sealed Sources, - Incidents/Accidents Reporting System for RI-related Facilities, - Development of Audio-Visual Education Materials for Radiation Workers, - Development of Major Safety Procedures for Portable RIs, - Expansion of Existing DB for Radiation Devices including New Domestic Ones, - Survey of Foreign Status of Quality Maintenance System for Radiation equipment

  20. Sustainability Issues and Opportunities in the Sugar and Sugar-Bioproduct Industries

    Directory of Open Access Journals (Sweden)

    Gillian Eggleston

    2015-09-01

    Full Text Available Like many other industries, the sugar and sugar-bioproduct industries are facing important sustainability issues and opportunities. The relatively low and fluctuating profit for sugar, surpluses of sugar, world-wide trend to produce alternative, renewable bio-based fuels and chemicals to those derived from petroleum and reduce greenhouse gases, water- and energy-intensive factories and refineries, and increased consumer demands for sustainably manufactured products are putting pressure on the industries to diversify for sustainability. Sugar crops, including sugar and energy cane (Saccharum officinarum, sugar and energy beets (Beta vulgaris, and sweet sorghum (Sorghum bicolor L. Moench, are excellent, renewable biomass feedstocks because of their availability, their being amongst the plants that give the highest yields of carbohydrates per hectare, and high sugar contents. While much research has been focused on conversion technologies for advanced biofuels and bioproducts, attention is now focused on developing sustainable supply chains of sugar feedstocks for the new, flexible biorefineries, with customers wanting maximum feedstock reliability and quality, while minimizing cost. All biomass from sugar crops are potential feedstocks. The cogeneration of bioelectricity from bagasse and leaf residues is being increasingly manufactured in more countries and, due to the high carbon content of bagasse and leaves, can also be converted into value-added products such as biochar. Sugar crops are superior feedstocks for the production of platform chemicals for the manufacture of a range of end-products, e.g., bioplastics, chemicals, and biomaterials. In several countries and regions, green sustainability criteria are now in place and have to be met to count against national biofuel targets. Processes to convert high-fiber sugar crop biomass into biofuel have been developed but there has only been limited commercialization at the large-scale.

  1. Ratepayer-funded energy-efficiency programs in a restructuredelectri city industry: Issues and options for regulators andlegislators

    Energy Technology Data Exchange (ETDEWEB)

    Eto, Joseph; Goldman, Charles; Nadel, Stephen

    1998-05-01

    Electric industry restructuring requires state regulators and legislators to re-examine the purposes served by and the continuing need for ratepayer-funded energy-efficiency programs, as well as the mechanisms to collect funds for these programs and the institutions appropriate to administer them. This paper offers background to these issues and a series of recommendations based on analysis of recent state experiences. Our recommendations are summarized.

  2. Biomass energy conversion workshop for industrial executives

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    The rising costs of energy and the risks of uncertain energy supplies are increasingly familiar problems in industry. Bottom line profits and even the simple ability to operate can be affected by spiralling energy costs. An often overlooked alternative is the potential to turn industrial waste or residue into an energy source. On April 9 and 10, 1979, in Claremont, California, the Solar Energy Research Institute (SERI), the California Energy Commission (CEC), and the Western Solar Utilization Network (WSUN) held a workshop which provided industrial managers with current information on using residues and wastes as industrial energy sources. Successful industrial experiences were described by managers from the food processing and forest product industries, and direct combustion and low-Btu gasification equipment was described in detail. These speakers' presentations are contained in this document. Some major conclusions of the conference were: numerous current industrial applications of wastes and residues as fuels are economic and reliable; off-the-shelf technologies exist for converting biomass wastes and residues to energy; a variety of financial (tax credits) and institutional (PUC rate structures) incentives can help make these waste-to-energy projects more attractive to industry. However, many of these incentives are still being developed and their precise impact must be evaluated on a case-by-case basis.

  3. Supply chain integration opportunities for the offshore wind industry

    DEFF Research Database (Denmark)

    Martinez, Ivan

    2016-01-01

    Purpose - This paper surveys the literature on supply chain integration (SCI) to identify the state of research in the various types of studied industries and manufacturing environments. The purpose of this paper is to identify academic discoveries that could provide offshore wind projects...... with means to overcome their current supply chain challenges. Design/methodology/approach - A comprehensive literature review was conducted involving 162 articles published in 29 peer-reviewed journals. The papers were analyzed in terms of the dimensions of SCI, research methodology, unit of analysis, level...... of analysis, type of industry and manufacturing environment being studied, integrative practices, integrative barriers and the link between SCI and performance. Findings - While SCI has been evolving to become an influential topic in the field of supply chain management, scholars have overlooked industrial...

  4. Addressing safety issues through a joint industry programme; Traiter des problemes de securite a travers un programme industriel commun

    Energy Technology Data Exchange (ETDEWEB)

    Pool, G.; Williams, T.P. [BG Technology (United Kingdom); Jones, A.M. [Health and Safety Executive (United Kingdom)

    2000-07-01

    In an increasingly fragmented gas market, the focus for national gas safety may not rest with one major utility or gas supplier but may be spread across many companies. There will also be many new organisations in a liberalized gas industry with varying views on the needs and benefits of safety related technology development but all agree there is a need to ensure that the good safety record of gas as a domestic fuel is maintained. The number of carbon monoxide (CO) incidents is not decreasing significantly despite an increased awareness of the problem. As a consequence, a two-year joint industry programme addressing issues related to carbon monoxide has been established, co-ordinated by BG Technology and supported by gas organisations, government agencies, manufacturers and suppliers across Europe and the World. The 2-year 2 pound million programme has been constructed as twelve separate projects addressing issues such as the reporting and analysis of domestic incidents, improved service or installation practice, CO alarm reliability and information dissemination. The paper gives results and achievements of the programme, through new techniques, standards, procedures or equipment and demonstrates how the gas industry can work together to meet common safety objectives. (authors)

  5. Natural gas 1998: Issues and trends

    International Nuclear Information System (INIS)

    1999-06-01

    Natural Gas 1998: Issues and Trends provides a summary of the latest data and information relating to the US natural gas industry, including prices, production, transmission, consumption, and the financial and environmental aspects of the industry. The report consists of seven chapters and five appendices. Chapter 1 presents a summary of various data trends and key issues in today's natural gas industry and examines some of the emerging trends. Chapters 2 through 7 focus on specific areas or segments of the industry, highlighting some of the issues associated with the impact of natural gas operations on the environment. 57 figs., 18 tabs

  6. Natural gas 1998: Issues and trends

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-06-01

    Natural Gas 1998: Issues and Trends provides a summary of the latest data and information relating to the US natural gas industry, including prices, production, transmission, consumption, and the financial and environmental aspects of the industry. The report consists of seven chapters and five appendices. Chapter 1 presents a summary of various data trends and key issues in today`s natural gas industry and examines some of the emerging trends. Chapters 2 through 7 focus on specific areas or segments of the industry, highlighting some of the issues associated with the impact of natural gas operations on the environment. 57 figs., 18 tabs.

  7. Eco-friendly Development Of Industry

    International Nuclear Information System (INIS)

    An, Gi Cheol; Park, Hun; Lee, Dong Jin; Ryu, Sang Hui

    1998-02-01

    This book reports eco-friendly development of industry, which has summary on bring up the issue and research way and system of research. It deals with current state of affairs on eco-friendly development of industry and the case of developed countries such as necessity and meaning of eco-friendly development industry, prospect and change of the tendency, environmental issue by field in Korea like the steel industry, nonferrous metal industry, auto industry, and cement industry and general policy for eco-friendly development of industry.

  8. Major recent trends in the oil industry

    International Nuclear Information System (INIS)

    Babusiaux, D.

    2000-01-01

    The article shows how globalisation of the petroleum industry continues to expand and accelerate with a strong trend to internalisation of national companies and corporate share capital. Globalisation tends to safeguard against shortages and the dependence of the West on the Middle East. Although geopolitical factors are important, it is economic considerations that are decisive. Technological innovation is the key to boosting competitiveness and offsetting the depletion of reserves. Worldwide, energy interdependence is growing but environmental factors cannot be overlooked. The behaviour of cartels with respect to pricing is explained

  9. Ergonomics issues among sewing machine operators in the textile manufacturing industry in Botswana.

    Science.gov (United States)

    Sealetsa, O J; Thatcher, A

    2011-01-01

    Universally musculoskeletal disorders are among the leading causes of low productivity in today's work environment. The situation is reportedly even worse in developing countries with appalling working conditions in many industries. In addition, there is often an acute lack of awareness of ergonomics issues, education and training programmes, and certification within developing countries. Numerous studies internationally have highlighted musculoskeletal risk factors associated with the textile industry and garment-making jobs because of highly repetitive work in awkward work postures. The objective of this study was to identify and describe possible ergonomics deficiencies in the workstation of sewing machine operators in a textile industry in Botswana as well as their perception of workload and bodily discomfort. This study focused on one textile manufacturing factory in Botswana where 157 female sewing machine operators were recruited as participants. A modified Corlett and Bishop body map questionnaire and the NASA TLX were administered and relevant anthropometric and workplace layout measurements were collected. The results of the study revealed a high prevalence of musculoskeletal disorders. Back, neck and shoulder discomfort are highly prevalent among these sewing machine operators. This study proposes intervention strategies including the re-design of the workstations and seating and the provision of training in basic ergonomics principles for improving the work-life of these operators and provides a base for further research on the prevalence of musculoskeletal disorders among sewing machine operators in developing countries.

  10. Institutionalization of Markets and Issues of the Growth of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Zamazii Oksana V.

    2015-09-01

    Full Text Available The article developes and proves a scientific hypothesis that strengthening the integration processes in the market space causes its institutionalization, and thus leads to the issues of proliferation of the free market players as a result of a division of spheres of influence between the major financial-industrial groups and corporations. It has been proved that a clear hierarchical structure, along with rigid subordination of free economic agents to the chief processor of resources within the growing corporations are those preconditions, which gradually form characteristics of an organization or an institution in terms of markets. An author's own definition of the notion of «institutional market» has been proposed, which is different from the classic formulation. It is emphasized that institutionalization of market space turns the latter into an another economic system, the main characteristics of which are: limited number of buyers and sellers; presence of conglomerates with rigid hierarchical relationships between buyers and sellers; etc. Enlargement and diversification of business as well as growth of its influence not only within its own industry sector, but also in the related sectors, leads to the fact that corporations are trying to control markets (supply and demand which meantime are turning into rigid management structures, acquiring characteristics of institutions (organizations. This hinders the market entry of new market players, increases risks of business and requires on the part of enterprises new marketing techniques for positioning the own ability to create customer value.

  11. Harmonization of industrial and oilfield waste management issues in Alberta

    International Nuclear Information System (INIS)

    Halla, S.

    1999-01-01

    There has been an ongoing discussion concerning the harmonization of waste management requirements within Alberta between the Alberta Energy and Utilities Board (EUB) and Alberta Environment (AENV), with the ultimate goal of publishing a memorandum of understanding (MOU) that will lay out the division of responsibilities between the two authorities on this matter. An overview is included of waste management in Alberta and of the harmonization agreements attained to date, with a stress on oil field waste issues. The EUB and AENV developed a MOE on the harmonization of waste management in Alberta, and a discussion is made of the concept of equivalency, which is used in the development of 'EUB guide 58: oilfield waste management requirements for the upstream petroleum industry' and will be a guiding principle for the MOU. Although the EUB's processes for waste management will not be exactly the same as AENV's, the EUB has made the commitment that, as a minimum, the requirements will provide the same level of environmental protection and public safety equivalent to that provided by AENV

  12. Environmental issues and the nuclear industry

    International Nuclear Information System (INIS)

    Castle, P.

    1995-01-01

    Health safety and environmental liabilities of the 'nuclear industry' reflect those of industry in general and may broadly be divided into two areas: criminal liability for regulatory non-compliance; and civil liability for damage caused to persons and their property (for example, neighbours, employees etc). In addition, environmental liability may be incurred as a result of powers of the regulatory authorities to clean up contamination and to recoup the cost. These are in addition to the regime of strict liability imposed, where relevant, by the Nuclear Installations Act 1965. In the case of environmental liabilities, 'owners;, 'occupiers', 'persons responsible', 'persons in control' may all be held to be liable and for the most part these terms remain undefined both under English law and European Community (now European Union) law. This potentially has ramifications for current and former owners and operators, their boards and senior managers, other employees, parent companies, shareholders and their lenders and investors - of particular relevance in the context of privatization. (author)

  13. Environmental issues and wastes

    International Nuclear Information System (INIS)

    Mitamura, Hisayoshi; Banba, Tsunetaka; Maeda, Toshikatsu; Ishiyama, Takashi

    1999-08-01

    All countries in the world are concerned about environmental issues because of their global effects. Developed industrial nations are also confronted with waste issues accompanied by mass production, mass consumption, and mass dump. We have reviewed books and reports to obtain a preliminary knowledge and to understand the trend of technology development before we start R and D for 'environmental monitoring, and environmental remediation and protection'. We lay great emphasis on municipal and industrial wastes in environmental issues and summarize the history of the earth, innovative environmental approaches in advanced nations, waste issues in Japan, and examples of technology development for environmental remediation and protection. (author)

  14. Technical issues and solutions on ITER first wall beryllium application. Industrial viewpoint

    International Nuclear Information System (INIS)

    Iwadachi, T.; Uda, M.; Ito, M.; Miyakawa, M.; Ibuki, M.

    2004-01-01

    Beryllium is selected as reference armor material of ITER primary first wall and is joined to the copper alloy heat sink such as CuCrZr or Dispersion Strengthened Copper (DSCu) Various joining technologies have been successfully developed and the manufacturing possibilities of large size first wall panels with beryllium armor has been demonstrated. Based on such results, further technical improvement is needed to reduce manufacturing cost and ensure the reliability of joining in actual size first wall. The technical issues to optimize the fabrication process of beryllium attachment were shown in this paper from an industrial point of view. Determination of the optimum size and the surface qualities of beryllium tiles are important issues in term of the material specification to ensure joining reliability and to reduce cost. The consolidation method and the finish machining methods of beryllium tiles are also critical in terms of material cost. These items should be determined by paying concern to the accommodation of the joining methods. The selections of slitting methods for attached beryllium have a great influence on fabrication cost. In the actual fabrication of beryllium attachment, safety provisions for exposure to beryllium in working environment and the recycling of the waste from the fabrication processes will be concerned sufficiently. (author)

  15. OCCUPATIONAL HEALTH AND SAFETY ISSUES IN VICTORIAN CONSTRUCTION INDUSTRY, AUSTRALIA

    OpenAIRE

    M. Asad, Abdurrahman

    2010-01-01

    The construction industry has one of the highest injury ratios of all Australian industries. Individuals employed on the construction industries find themselves confronted with dangerous and life-threatening work conditions. However, it appears that the trend in Occupational Health and Safety (OHS) performance of construction industry has improved consistently compared with the other industries. The enforcement of OHS law and regulation, and the outcome of authority function to assist and pro...

  16. Antitrust issues and the restructuring of the power industry

    International Nuclear Information System (INIS)

    Moritz, T.F.

    1999-01-01

    Because of extensive federal oversight and state regulation of the utility area, few antitrust cases have been brought concerning the electric power industry. The limited prior case law that exists in this area nonetheless provides valuable guidance regarding how the antitrust laws will protect consumers and, therefore, competition in the electric power industry. This article will discuss the primary antitrust doctrines likely to be utilized to protect competition in this industry

  17. Transition costs in the electricity industry: A summary of issues

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, L.; Hirst, E.; Hadley, S.

    1996-10-01

    Progress is evident as the restructuring debate in the U.S. electricity industry completes its third year. The Federal Energy Regulatory Commission released a final rule on transmission open access-a key element to facilitate more efficient wholesale markets. The majority of states have initiated investigations or discussions on restructuring retail markets. Yet hurdles remain in formulating and implementing state-level restructuring proposals. Perhaps foremost among these hurdles is the issue of transition costs (the potential monetary losses experienced by utilities, consumers, and other economic actors as a result of government initiatives to transform electricity generation from a regulated to a competitive market). Transition costs are approximately equal to the difference between the embedded cost for generation services under traditional cost-of-service regulation and the competitive-market price for power. When government takes action to open current monopoly franchises to multiple generation providers and the competitive-market price falls below embedded generation costs, then transition costs will arise. Transition costs will include one or more of the following four classes of costs: (1) assets, primarily utility-owned power plants; (2) liabilities, primarily long-term power-purchase and fuel-supply contracts; (3) regulatory assets, including deferred expenses and costs that regulators allow utilities to place on their balance sheets; and (4) public-policy programs, such as energy efficiency, low-income programs, and research and development. What is at issue in the transition-cost debate? The debate turns on four questions: (1) How large are the potential transition costs from restructuring? (2) How are these costs estimated? (3) What, if anything, might be done to address these costs? (4) Who will ultimately pay for any remaining costs and how? This paper summarizes some of the key results from a project at ORNL that addresses these four questions.

  18. Symposium on operational and environmental issues concerning use of water as a coolant in power plants and industries: proceedings

    International Nuclear Information System (INIS)

    2008-12-01

    The symposium is organised to bring together researchers, plant operators and regulatory agencies working in the area of operational and environmental problems associated with use of water as a coolant in power plants and other allied industries. The symposium targets chemists, biologists, environmental scientists, power plant operating engineers and plant designers working in various academic, governmental and non-governmental organisations. The major themes of the symposium are: water chemistry of coolant systems in power plants and other industries, chemistry of primary and moderator systems in nuclear power plants and research reactors, corrosion issues including Flow-Accelerated Corrosion (FAC) and its control in water coolant systems, chemistry of steam and water at elevated temperature in nuclear power plants, once through steam generator chemistry, industrial fire water systems, ion-exchange purification, innovative water treatment in power and industrial units, chemical cleaning and chemical decontamination, biofouling and biocorrosion, cooling water treatment chemicals and their environmental fate and environmental impact of thermal effluents. Papers relevant to INIS are indexed separately

  19. Current Issues in Tourism

    OpenAIRE

    Xu, Shi; Martinez, Larry R.; Hubert, Van Hoof; Tews, Michael; Torres, Leonardo; Farfán, Karina

    2015-01-01

    Ram (2015 Ram, Y. (2015). Hostility or hospitality? A review on violence, bullying and sexual harassment in the tourism and hospitality industry. Current Issues in Tourism. doi:10.1080/13683500.2015.1064364 [Taylor & Francis Online], [Google Scholar] . Hostility or hospitality? A review on violence, bullying and sexual harassment in the tourism and hospitality industry. Current Issues in Tourism. doi:10.1080/13683500.2015.1064364) posits that violence and harassment are areas of concern...

  20. Environmental and community issues and the mining industry

    International Nuclear Information System (INIS)

    Crowson, P.

    1998-01-01

    Much has been said and written in recent years about the greatly increased difficulties faced by the mining industry in meeting the expectations of local communities and in adequately protecting the natural environment. The impression is often given that the industry was completely oblivious of such concerns and needs until the present decade, and that it is now struggling to make up for past neglect. Certainly the standards required by society as a whole have risen, and there is more public discussion that in earlier times, but the management of many major mining companies have long been fully aware of their obligations to the environment and local communities. To argue otherwise would be to misread the history of the industry and to perform a grave disservice to many dedicated managers of the mining projects of former years. (author)

  1. Contentious issues in research on trafficked women working in the sex industry: study design, ethics, and methodology.

    Science.gov (United States)

    Cwikel, Julie; Hoban, Elizabeth

    2005-11-01

    The trafficking of women and children for work in the globalized sex industry is a global social problem. Quality data is needed to provide a basis for legislation, policy, and programs, but first, numerous research design, ethical, and methodological problems must be addressed. Research design issues in studying women trafficked for sex work (WTSW) include how to (a) develop coalitions to fund and support research, (b) maintain a critical stance on prostitution, and therefore WTSW (c) use multiple paradigms and methods to accurately reflect WTSW's reality, (d) present the purpose of the study, and (e) protect respondents' identities. Ethical issues include (a) complications with informed consent procedures, (b) problematic access to WTSW (c) loss of WTSW to follow-up, (d) inability to intervene in illegal acts or human rights violations, and (e) the need to maintain trustworthiness as researchers. Methodological issues include (a) constructing representative samples, (b) managing media interest, and (c) handling incriminating materials about law enforcement and immigration.

  2. The natural gas industry and interest rates

    International Nuclear Information System (INIS)

    Yoon, Y.J.

    1995-01-01

    In discussing the impact of Federal Energy Regulatory Commission (FERC) Order 636, the latest rule on the restructuring and deregulation of the US natural gas industry, the effect of interest rates on the success of the FERC policy is often overlooked. The thesis of this paper is that interest rates play an important role in integrating seasonal gas markets and in stimulating investment in storage infrastructure. We propose a model to analyse the equilibrium condition for an efficient gas market. Also analysed are the implications of pipeline rate design of FERC 636 for gas despatch decisions. (author)

  3. The relevance of the ISO26000 social responsibility issues to the Hong Kong construction industry

    Directory of Open Access Journals (Sweden)

    Lisa Robyn Barnes

    2013-09-01

    Full Text Available CorporateSocial Responsibility (CSR, the responsibility of a corporation for theimpacts of its decisions on society and the environment, originated as a termin the 1950’s (Carroll 1999. However, ISO 26000 (ISO 2010“Guidance on Social Responsibility” published in November 2010, redefines “SocialResponsibility” (“SR” broadly, by reference to SR principles, core subjectsand issues. The Hong Kong Construction Industry (“HKCI” sector is critical to Hong Kong’s economy, accounting for5.6% of the GDP and 9.2% of employment in 1999 (Tang 2001. In 2011, the gross value of constructionwork by main contractors amounted to HK$128.53 billion and contributed HK$65.4 billion (HKGov 2013to the total GDP of HK$1,823.2 billion (3.6% (HKTDC 2013.The aim of this research is toinvestigate which ISO 26000 CSR issues are relevantto HKCI firms. Theprinciple findings are that: the reported level of HKCI CSR activity relativeto the 7 core subject of ISO 26000 is a function of company size; many SME’sconsider that many of the ISO 26000 SR issues are irrelevant to them; but forthe large construction contractors, reputation, legislation and or regulation andcorporate culture are drivers of improvements in CSR in the HKCI.

  4. Ceramic transactions: Environmental and waste management issues in the ceramic industry. Volume 39

    International Nuclear Information System (INIS)

    Mellinger, G.B.

    1994-01-01

    A symposium on environmental and waste management issues in the ceramic industry took place in Cincinnati, Ohio, April 19-22, 1993. The symposium was held in conjunction with the 95th Annual Meeting of the American Ceramic Society and was sponsored by the Ceramic Manufacturing Council, Legislative and Regulatory Affairs Committee with the Glass and Optical Materials, Basic Science, Cements, Nuclear, Refractory Ceramics, Structural Clay Products, Whitewares, Design, Electronics, Engineering Ceramics, and Materials and Equipment Divisions. This volume documents several of the papers that were presented at the symposium. Papers presented in this volume are categorized under the following headings: vitrification of hazardous and mixed wastes; waste glass properties and microstructure; processing of nuclear waste disposal glasses; waste form qualification; glass dissolution: modeling and mechanisms; systems and field testing of waste forms

  5. Uranium and nuclear issues

    International Nuclear Information System (INIS)

    1983-01-01

    This seminar focussed on the major issues affecting the future of the entire nuclear fuel cycle. In particular it covered issues bearing on the formation of public policy in relation to the use of uranium as an energy source: economic risk, industrial risks, health effects, site selection, environmental issues, and public acceptance

  6. Development of a framework for identification of political environmental issues faced by multinational hotel chains in newly industrialized countries in Asia

    OpenAIRE

    Kim, Chol Yong

    1992-01-01

    The primary/objective of this study was to develop a framework for identification of political environmental issues faced by multinational hotel chains in newly industrialized countries in Asia. To accomplish the objective, key factors having an impact upon these hotel chains were identified using the Delphi Technique.

  7. What Gives You a Social Licence? An Exploration of the Social Licence to Operate in the Australian Mining Industry

    Directory of Open Access Journals (Sweden)

    Sara Bice

    2014-01-01

    Full Text Available This article analyses the ways in which major, multinational mining companies operating within Australia understand sustainable development and articulate their “social licence to operate”. The article contributes a novel perspective to ongoing discussions about the social licence by exploring the ways in which leading Australian mining companies define and assert their social licences through sustainable development discourse. A content and discourse analysis of 18 sustainability reports across a four year period, supplemented by qualitative interview data, draws out these issues. While most companies use these reports to confirm beliefs in the necessity of a social licence, the ways in which the licence is specifically defined and maintained are not generally made explicit. Additionally, key theoretical criteria required for a social licence, such as free, prior and informed consent, appear to be overlooked. In conclusion, the article suggests ways in which criteria for a social licence within the mining industry could be defined more clearly and raises consequent questions to shape future research.

  8. American Indian tribes and electric industry restructuring: Issues and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Howarth, D. [Morse, Richard, and Weisenmiller, and Associates Inc., Oakland, CA (United States); Busch, J. [Lawrence Berkeley National Lab., CA (United States); Starrs, T. [Kelso, Starrs, and Associates LLC, Vashon, WA (United States)

    1997-07-01

    The US electric utility industry is undergoing a period of fundamental change that has significant implications for Native American tribes. Although many details remain to be determined, the future electric power industry will be very different from that of the present. It is anticipated that the new competitive electric industry will be more efficient, which some believe will benefit all participants by lowering electricity costs. Recent developments in the industry, however, indicate that the restructuring process will likely benefit some parties at the expense of others. Given the historical experience and current situation of Native American tribes in the US, there is good reason to pay attention to electric industry changes to ensure that the situation of tribes is improved and not worsened as a result of electric restructuring. This paper provides a review of electricity restructuring in the US and identifies ways in which tribes may be affected and how tribes may seek to protect and serve their interests. Chapter 2 describes the current status of energy production and service on reservations. Chapter 3 provides an overview of the evolution of the electric industry to its present form and introduces the regulatory and structural changes presently taking place. Chapter 4 provides a more detailed discussion of changes in the US electric industry with a specific focus on the implications of these changes for tribes. Chapter 5 presents a summary of the conclusions reached in this paper.

  9. Industry outreach a status report

    Energy Technology Data Exchange (ETDEWEB)

    Surek, D.; Sen, R. [R.K. Sen & Associates, Inc., Bethesda, MD (United States)

    1995-09-01

    The Outreach Project was initiated in October 1994 with the objective of developing a multi-year plan for the U.S. Department of Energy (DOE) for targeted outreach activities for stakeholders in industry and the general public. This status report summarizes the work on industry outreach that has been completed since the inception of the project in October 1994. A three-pronged approach was taken to ascertain issues related to industry outreach. First, there was a review of on-going and past industry outreach activities at DOE and NHA. Next, a series of meetings with industry decision makers was arranged to get a better understanding of industry interests and concerns, and to discuss how DOE and industry could work collaboratively to develop hydrogen energy systems. Third, a workshop is scheduled where representatives from industry, DOE and other federal agencies can identify issues that would enhance partnering between the federal government and industry in the development of hydrogen energy systems. At this tiny, the review of on-going and past activities has been completed. Industry interviews are in progress and a majority of meetings have been held. Analysis of the information gained is in progress. The preliminary analysis of this information indicates that for appropriate near-term demonstration-type projects, the level of interest for collaboration between DOE and industry is high. The data also identifies issues industry is concerned with which impact the commercialization of hydrogen energy systems.

  10. Psychiatric disorders are overlooked in patients with drug abuse

    DEFF Research Database (Denmark)

    Kruckow, Line; Linnet, Kristian; Banner, Jytte

    2016-01-01

    Introduction: Psychiatric disease is overlooked in drug users. Patients with both drug abuse and a psychiatric disease – dual diagnosis – suffer decreased compliance to treatment and decreased life expectancy compared with single-diagnosis patients. Identifying the patients among ­either drug...... addicts or mentally ill patients is difficult. Methods: All drug addicts autopsied at the Department of Forensic Medicine, University of Copenhagen, Denmark, in the years 1992, 2002 and 2012 were included. The group was divided into two subpopulations of possible dual diagnosis patients either according...... to police reports stating mental illness or to psychotropics found in the toxicology screening after autopsy. Results: We found a rise in possible mental illness in both subpopulations in the study period. Drug addicts with psychotropics in the blood at the time of death increased from 3.1% in 1992 to 48...

  11. Occurrence and overlooked sources of the biocide carbendazim in wastewater and surface water.

    Science.gov (United States)

    Merel, Sylvain; Benzing, Saskia; Gleiser, Carolin; Di Napoli-Davis, Gina; Zwiener, Christian

    2018-08-01

    Carbendazim is a fungicide commonly used as active substance in plant protection products and biocidal products, for instance to protect facades of buildings against fungi. However, the subsequent occurrence of this fungicide and potential endocrine disruptor in the aqueous environment is a major concern. In this study, high resolution mass spectrometry shows that carbendazim can be detected with an increasing abundance from the source to the mouth of the River Rhine. Unexpectedly, the abundance of carbendazim correlates poorly with that of other fungicides used as active ingredients in plant protection products (r 2 of 0.32 for cyproconazole and r 2 of 0.57 for propiconazole) but it correlates linearly with that of pharmaceuticals (r 2 of 0.86 for carbamazepine and r 2 of 0.89 for lamotrigine). These results suggest that the occurrence of carbendazim in surface water comes mainly from the discharge of treated domestic wastewater. This hypothesis is further confirmed by the detection of carbendazim in wastewater effluents (n = 22). In fact, bench-scale leaching tests of textiles and papers revealed that these materials commonly found in households could be a source of carbendazim in domestic wastewater. Moreover, additional river samples collected nearby two paper industries indicate that the discharge of their treated process effluents is also a source of carbendazim in the environment. While characterizing paper and textile as overlooked sources of carbendazim, this study also shows the biocide as a possible ubiquitous wastewater contaminant that would require further systematic and worldwide monitoring due to its toxicological properties. Copyright © 2018 Elsevier Ltd. All rights reserved.

  12. Tobacco industry use of corporate social responsibility tactics as a sword and a shield on secondhand smoke issues.

    Science.gov (United States)

    Friedman, Lissy C

    2009-01-01

    The tobacco industry has used corporate social responsibility tactics to improve its corporate image with the public, press, and regulators who increasingly have grown to view it as a merchant of death. There is, however, an intractable problem that corporate social responsibility efforts can mask but not resolve: the tobacco industry's products are lethal when used as directed, and no amount of corporate social responsibility activity can reconcile that fundamental contradiction with ethical corporate citizenship. This study's focus is to better understand the tobacco industry's corporate social responsibility efforts and to assess whether there has been any substantive change in the way it does business with regard to the issue of exposure to secondhand smoke. The results show that the industry has made no substantial changes and in fact has continued with business as usual. Although many of the tobacco companies' tactics traditionally had been defensive, they strove for a way to change to a more offensive strategy. Almost without exception, however, their desire to appear to be good corporate citizens clashed with their aversion to further regulation and jeopardizing their legal position, perhaps an irreconcilable conflict. Despite the switch to offense, in 2006 a federal judge found the companies guilty of racketeering.

  13. Epizoochory in dry forest iguanas: an overlooked seed dispersal mechanism?

    Directory of Open Access Journals (Sweden)

    Eloisa Lasso

    2015-01-01

    Full Text Available The role of animals as seed dispersal vectors is widely acknowledged, including dispersal by reptiles (saurochory. Most reports of saurochory have been via endozoochory, through feces deposition. We present the first evidence of epizoochory in Iguanas from a dry forest in Colombia via seeds attached to the snout. Our results show that seeds of a cactus Melocactus curvispinus ingested by iguana suffers from their passage through the digestive tract while seeds transported while attached to the snout germinate faster and in higher numbers. Our data suggest that we may have overlooked an alternative means of seed dispersal by lizards that does not comprise a passage through their digestive tract, and that deserves further attention for the understanding of dry forest ecology.

  14. Ethical issues at the university-industry interface: a way forward?

    Science.gov (United States)

    Evans, G R; Packham, D E

    2003-01-01

    This paper forms an introduction to this issue, the contents of which arose directly or indirectly from a conference in May 2001 on Corruption of scientific integrity?--The commercialisation of academic science. The introduction, in recent decades, of business culture and values into universities and research institutions is incompatible with the openness which scientific and all academic pursuit traditionally require. It has given rise to a web of problems over intellectual property and conflict of interest which has even led to corporate sponsors' suppressing unfavourable results of clinical trials, to the detriment of patients' health. Although there are those who see the norms of science developing to recognise the importance of instrumental science aiming at specific goals and of knowledge judged by its value in a context of application, none justifies the covert manipulation of results by vested interest. Public awareness of these problems is growing and creating a climate of opinion where they may be addressed. We suggest a way forward by the introduction of nationally and internationally-accepted guidelines for industrial collaboration which contain proper protections of the core purposes of universities and of the independence of their research. Some codes suggested for this purpose are discussed. We note that some universities are moving to adopt such codes of conduct, but argue the need for strong support from the government through its funding bodies.

  15. Takotsubo cardiomyopathy: an overlooked cause of chest pain

    Directory of Open Access Journals (Sweden)

    Leonardo Hackbart Bermudes

    2014-06-01

    Full Text Available Takotsubo cardiomyopathy (TTC, also known as apical ballooning syndrome, broken heart syndrome, or stress-induced cardiomyopathy, is defined as a transient disturbance of the left ventricle, which is quite often associated with electrocardiographic abnormalities that may mimic acute myocardial infarction. The syndrome is also characterized by a mild alteration of cardiac biomarkers in absence of coronary blood flow obstruction on the coronariography. Clinical presentation is often manifested by angina, dyspnea, syncope, and arrhythmias. Peculiarly, the left ventricle takes the form of “tako-tsubo” (a Japanese word for “octopus trap” on the imaging workup. The authors report the case of a post-menopausal, hypertensive, dyslipidemic and type-II diabetic woman admitted at the emergency service with acute chest pain post physical exertion. Electrocardiogram showed signs of ischemia and myocardial necrosis markers were mildly increased. Echocardiography and ventriculography showed apical and mid-ventricular akinesia, with mild atherosclerotic coronary lesions. Thus diagnostic workup and the outcome followed the diagnostic criteria for TTC. The authors called attention to the potential of overlooking this diagnosis, since this syndrome is still not widely recognized.

  16. Small, mobile, persistent: Trifluoroacetate in the water cycle - Overlooked sources, pathways, and consequences for drinking water supply.

    Science.gov (United States)

    Scheurer, Marco; Nödler, Karsten; Freeling, Finnian; Janda, Joachim; Happel, Oliver; Riegel, Marcel; Müller, Uwe; Storck, Florian Rüdiger; Fleig, Michael; Lange, Frank Thomas; Brunsch, Andrea; Brauch, Heinz-Jürgen

    2017-12-01

    Elevated concentrations of trifluoroacetate (TFA) of more than 100 μg/L in a major German river led to the occurrence of more than 20 μg/L TFA in bank filtration based tap waters. Several spatially resolved monitoring programs were conducted and discharges from an industrial company were identified as the point source of TFA contamination. Treatment options for TFA removal were investigated at full-scale waterworks and in laboratory batch tests. Commonly applied techniques like ozonation or granulated activated carbon filtration are inappropriate for TFA removal, whereas TFA was partly removed by ion exchange and completely retained by reverse osmosis. Further investigations identified wastewater treatment plants (WWTPs) as additional TFA dischargers into the aquatic environment. TFA was neither removed by biological wastewater treatment, nor by a retention soil filter used for the treatment of combined sewer overflows. WWTP influents can even bear a TFA formation potential, when appropriate CF 3 -containing precursors are present. Biological degradation and ozonation batch experiments with chemicals of different classes (flurtamone, fluopyram, tembotrione, flufenacet, fluoxetine, sitagliptine and 4:2 fluorotelomer sulfonate) proved that there are yet overlooked sources and pathways of TFA, which need to be addressed in the future. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Abstracts of the TICCIH Canada conference on industrial strength : conserving Canada's industrial heritage

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    The conservation and rehabilitation of Canada's industrial sites represents some of the most innovative examples of heritage site development. This conference provided a forum for various stakeholder, conservation specialists, and community planners to discuss issues and strategies for preserving Canada's industrial heritage. Challenges related to preserving industrial heritage as historic sites and museums were discussed. Methods of strengthening community identity and engagement with industrial heritage preservation were also presented. The future of an industrial heritage network was considered. The conference was divided into the following 7 sessions: (1) new site development, brownfield to heritage sites, (2) inventories, evaluation and awareness, (3) industrial heritage of Hamilton, (4) conservation, adaptive reuse and economic viability, a case study of the Toronto distillery project, (5) industrial landscapes, (6) preserving the intangibles, and (7) industrial heritage museums, issues in conservation, interpretation, and sustainability. The conference featured 19 papers, of which 2 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  18. UK energy issues 1987-1992

    Energy Technology Data Exchange (ETDEWEB)

    Stern, P J

    1987-01-01

    This paper describes and analyses the energy issues and options which the British Government will either choose, or be required, to address over the next five years. After considering the domestic and international environment, the paper looks at the future for: electricity generation, and the coal industry in the light of the decision to privatise the Electricity Supply Industry; the oil and gas sector; research and development; demand and conservation including fuel poverty; energy pricing; international energy issues; and attitudes to energy policy making. 80 refs.

  19. Control and prevention of industrial air pollution: Special issue; Bestrijding en preventie van industriele luchtverontreiniging: Thema

    Energy Technology Data Exchange (ETDEWEB)

    Waque, W.P.G.M. [Bureau Vergunningen en Bedrijven, DCMR Milieudienst Rijnmond, Schiedam (Netherlands); Zijlstra, W.M. [Bureau Milieu en Ruimtelijke Ordening, VNO/NCW, The Hague (Netherlands); Buisman, C.J.N.; Dijkman, H. [Paques, Balk (Netherlands); Prins, W.L.; Verbraak, P. [Biostar Development, Balk (Netherlands); Den Hartog, A.J. [Hoogovens Corporate Research Laboratorium, IJmuiden (Netherlands); Jol, A. [Sector Milieutechnologie, DHV Milieu en Infrastructuur, Amersfoort (Netherlands); Van Ham, J. [ed.

    1994-12-01

    In four articles in this special issue of the magazine attention is paid to new techniques by which emissions to the air from the industry can be controlled and/or prevented. In the first article an overview is given of sources of air pollution, caused by dust. In the second article intermediate results of the KWS 2000 program (aimed at 50% reduction of the emission of volatile organic matter for the year 2000) are outlined. In the third article a cooperative biological (flue) gas desulfurization pilot plant project is discussed. In the fourth and last article the most important possible techniques to reduce the emission of volatile organic matter are highlighted

  20. Pediatric issues in disaster management, part 2: evacuation centers and family separation/reunification.

    Science.gov (United States)

    Mace, Sharon E; Sharieff, Ghazala; Bern, Andrew; Benjamin, Lee; Burbulys, Dave; Johnson, Ramon; Schreiber, Merritt

    2010-01-01

    Although children and infants are likely to be victims in a disaster and are more vulnerable in a disaster than adults, disaster planning and management has often overlooked the specific needs of pediatric patients. We discuss key components of disaster planning and management for pediatric patients including emergency medical services, hospital/facility issues, evacuation centers, family separation/reunification, children with special healthcare needs, mental health issues, and overcrowding/surge capacity. Specific policy recommendations and an appendix with detailed practical information and algorithms are included. The first part of this three part series on pediatric issues in disaster management addresses the emergency medical system from the field to the hospital and surge capacity including the impact of crowding. The second part addresses the appropriate set up and functioning of evacuation centers and family separation and reunification. The third part deals with special patient populations: the special healthcare needs patient and mental health issues.

  1. Issues engulfed Saudi Arabia construction workers

    Science.gov (United States)

    Al-Emad, N. H.; Rahman, I. A.

    2018-04-01

    This paper presents an exploratory study conducted in Makkah city to uncover issues faced by construction workers from the construction leaders’ perspective. Eleven construction leaders/experts were interviewed to unleash their experiences on handling the foreign workers working in Makkah construction projects. Most of the experts are senior management staffs with more than 10 years’ working experience in Saudi Arabia construction industry. The interviews were carried out in semi structured mode where all the information was captured manually and also electronically. The identified issues were sorted based on its commonality into 10 clusters. Hence in each cluster, the numbers of issue considered by the experts are reflecting the importance of that particular cluster. The result of the clusters according to the number of issues mentioned by the experts are safety issues, restricted government regulation, demotivated issues, lack of quality workers, poor living quality, communication barriers, adaption issues, poor attitudes, lack of logistical arrangements and lack of education. With these identified issues it will assist the construction players in the construction industry of Saudi Arabia in dealing with their workers.

  2. Social Issues: Making Them Relevant and Appropriate to Undergraduate Student Designers

    Science.gov (United States)

    Lofthouse, Vicky

    2013-01-01

    Sustainable design education is now considered a core issue for industrial/product design courses, however research has shown that the predominant focus tends to be on environmental issues, as social issues are much harder to tackle. Similarly, social issues are rarely considered in industrial practice. If student designers are to become…

  3. Food Marketing to Children - Introduction to Ethical Issues

    Directory of Open Access Journals (Sweden)

    Květa Olšanová

    2013-09-01

    Full Text Available The working paper provides an overview of key stakeholders involved in the food marketing to children in Europe and in the Czech Republic. It analyzes the role of the legislation as well as of voluntary codes of conduct in the food industry. The industry part of the issue is also covered by explanation of their role and position in the obesity issue. The form of food industry cooperation at the Food Chamber through a working group of involved companies is analyzed and an example of the corporate responsibility program is shown. The paper is going to serve as a review of the issue for further exploration needs.

  4. Taxation of the energy industries

    International Nuclear Information System (INIS)

    Armstrong, G.

    1995-01-01

    Taxation of the energy industries is an issue of major importance for each energy sector. This has always been the situation for the primary fossil fuel sectors but, with corporatization and privatization, is now also an issue for the electricity supply industry. This article examines the most significant forms of taxation affecting the major industry sectors, namely secondary taxation, corporate taxation and, as a consequence of the corporatization and privatization of the electricity supply industry, surrogate taxation as it affects that industry. While essentially considering secondary taxation, the paper also reviews corporate and surrogate taxes. Tax exemptions for various energy sector activities such as mining operations, exploration and rehabilitation related activities are outlined. It is considered that there is insufficient evidence of the influence of taxation and other factors on electricity pricing. 2 tabs

  5. A Study on introduction of Bench Marking in the power industry - concentrated on the Bench Marking issue in the power industry

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Hyuck Soo [Korea Energy Economics Institute, Euiwang (Korea)

    1998-08-01

    Recently it takes too much pains for enterprises to be adapted to the more complicated social structure. There are no guarantees to survive in competition only with improving service quality of a product, reducing cost by improving production efficiency, and reducing labors. To survive in a keen competition, it is important to acquire new management techniques and management theories. Among them, a benchmarking technique, improving competitive power through the analysis of top-ranking companies or companies with excellent results in a comparative sector, is in the spotlight recently. Therefore, the approaches to bench marking were discussed with the focus on the adaptation of KEPCO with a new paradigm. However, this study contained the limit of applying benchmarking technique due to its huge scale. Therefore, it was focused on brining up benchmarking issue by reflecting the basic problems of power industry to the developed countries. (author). 29 refs., 16 figs., 41 tabs.

  6. Utility customer issues

    International Nuclear Information System (INIS)

    Downey, W.H.

    1997-01-01

    Customer issues affected by the restructuring of the $250 billion US electric power industry were discussed. In the past the industry's vertically integrated utilities conducted their business in protected geographic markets. With deregulation and greater competition, that industry structure will change. This presentation highlighted the strategies that Unicom is using to react to the restructuring of the electric power industry. The underlying principle is for the utility to reinvent itself to change its market orientation and focus on customer services, such as reliability, responsiveness, custom tailored solutions, and guaranteed savings over time. Attempting to become total energy providers and delivering integrated solutions to meet the needs of large industrial and commercial consumers, intensive market research, improved service and installation, and sophisticated customer retention initiatives will also have to be high on the agenda

  7. Editorial: Special Issue on Experimental Vibration Analysis

    Science.gov (United States)

    Serra, Roger

    2018-04-01

    The vibratory analyses are particularly present today in the various fields of industry, from aeronautics to manufacturing, from machining and maintenance to civil engineering, to mention a few areas, which have made this special issue a true need. The International Journal of Mechanics & Industry compiles a Special Issue on Experimental Vibration Analysis. More than thirty manuscripts were received by the international scientific committee on the 6th congress AVE2016 and only eight papers have been selected after completing a careful and rigorous peer-review process for the Special Issue, which are briefly summarized below.

  8. Petroleum industry of Korea seen from industry

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H.P. [SK Co, Seoul (Korea, Republic of)

    1998-05-01

    The domestic petroleum industry faced with outward opening and exchange crisis is put under the most difficult period so far, and costs reduction and securing international competitive power in software field are emerging as important assignments on which the life and death of national key industries depends not only as a restructuring issue of each petroleum company. Required strategy of petroleum industry to solve this effectively this year must be the thorough revamping through restructuring and reform of management standards not the survival exercise through price competition. For this, each petroleum company and distributor should open a new petroleum industry in which fair rules of the game are developed as well as costs reduction through joint efforts and value creation in overall industry. For this, government should support the domestic petroleum industry to stand up straight as a keeper of domestic energy industry by helping it to arm with international competitive power within a short period of time through overall needed system and legal scheme. It is because nobody can deny that energy industry is the key industry on which national existence is at stake.

  9. Geothermal industry assessment

    Energy Technology Data Exchange (ETDEWEB)

    1980-07-01

    An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

  10. NST Quarterly. January 1996 issue

    International Nuclear Information System (INIS)

    1996-01-01

    NST Quarterly reports current development in Nuclear Science and Technology in Malaysia. In this issue it highlights MINT activities in nuclear medicine, healthcare products sterilization, industrial irradiation dosimetry and heavy metals determination in food. The Malaysian standard for food irradiation was discussed in this issue

  11. Industrial ecology.

    Science.gov (United States)

    Patel, C K

    1992-01-01

    Industrial ecology addresses issues that will impact future production, use, and disposal technologies; proper use of the concept should reduce significantly the resources devoted to potential remediation in the future. This cradle-to-reincarnation production philosophy includes industrial processes that are environmentally sound and products that are environmentally safe during use and economically recyclable after use without adverse impact on the environment or on the net cost to society. This will require an industry-university-government round table to set the strategy and agenda for progress. PMID:11607254

  12. DAIRY INDUSTRY: ALTERNATIVES TO RECOVERY WHEY AS A MEANS OF ENVIRONMENTAL MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Liliane Marquardt

    2012-01-01

    Full Text Available Small and medium industries of dairy products in Brazil are facing serious problems of competition for the consumer market due to factors such as small scale production, lack of standardization of products and processes, deficiencies in effective control of quality, difficult to define niche markets and different levels of technology, although they are generating jobs and income. In addition to these factors, it appears that the control of environmental impacts caused by these industries, given the current environmental legislation, has forced a change of attitude on the part of entrepreneurs, in order to control pollution, despite the shortcomings often perceived in infrastructure linked to industrialization, such as high energy and water. The treatment and disposal of effluents and solid waste disposal, which are critical in industrial processes, are often overlooked in small and medium industries, generating significant environmental impacts. Among the main environmental impacts generated by the dairy industry stands to generate significant amounts of wastewater with high organic load. In this sense, the main objective of this study was a literature survey concerning the main factors of environmental impact of small and medium industries in the dairy sector, aiming to propose alternative environmental management that favors the minimization of the factors generating these impacts.

  13. Overlooking the smallest matter: viruses impact biological invasions.

    Science.gov (United States)

    Faillace, Cara A; Lorusso, Nicholas S; Duffy, Siobain

    2017-04-01

    Parasites and pathogens have recently received considerable attention for their ability to affect biological invasions, however, researchers have largely overlooked the distinct role of viruses afforded by their unique ability to rapidly mutate and adapt to new hosts. With high mutation and genomic substitution rates, RNA and single-stranded DNA (ssDNA) viruses may be important constituents of invaded ecosystems, and could potentially behave quite differently from other pathogens. We review evidence suggesting that rapidly evolving viruses impact invasion dynamics in three key ways: (1) Rapidly evolving viruses may prevent exotic species from establishing self-sustaining populations. (2) Viruses can cause population collapses of exotic species in the introduced range. (3) Viruses can alter the consequences of biological invasions by causing population collapses and extinctions of native species. The ubiquity and frequent host shifting of viruses make their ability to influence invasion events likely. Eludicating the viral ecology of biological invasions will lead to an improved understanding of the causes and consequences of invasions, particularly as regards establishment success and changes to community structure that cannot be explained by direct interspecific interactions among native and exotic species. © 2017 John Wiley & Sons Ltd/CNRS.

  14. Climate Change and Environmental assessments: Issues in an African Perspective

    Energy Technology Data Exchange (ETDEWEB)

    Dalfelt, Arne; Naess, Lars Otto

    1997-12-31

    The present report discusses the potential for integrating climate change issues into environmental assessments of development actions, with an emphasis on sub-Sahara Africa. The study is motivated by the fact that future climate change could have significant adverse impacts on the natural and socio-economic environment in Africa. Yet, to date global change issues, including climate change, have been largely overlooked in the process of improving environmental assessment procedures and methodologies. It is argued that although emissions of greenhouse gases in Africa are negligible today, it is highly relevant to include this aspect in the planning of long-term development strategies. The report discusses potential areas of conflicts and synergies between climate change and development goals. The general conclusion is that environmental assessments could be an appropriate tool for addressing climate change issues, while there are still several obstacles to its practical implementation. Four priority areas are suggested for further work: (1) Environmental accounting, (2) harmonization and standard-setting, (3) implementation, and (4) risk management. 82 refs., 5 figs., 11 tabs.

  15. Industrial Dynamics and Economic Geography

    NARCIS (Netherlands)

    Capasso, Marco|info:eu-repo/dai/nl/314016627; Stam, Erik|info:eu-repo/dai/nl/215649370; Cefis, Elena|info:eu-repo/dai/nl/274516233

    2015-01-01

    Capasso M., Stam E. and Cefis E. Industrial dynamics and economic geography, Regional Studies. How do industries emerge and evolve over space? In this special issue the fields of industrial dynamics and economic geography are brought together in order to achieve a richer and more fundamental

  16. China Should Learn from Other Nations in Safeguarding Industrial Security

    Institute of Scientific and Technical Information of China (English)

    纪宝成; 刘元春

    2007-01-01

    The article examines the current conditions of China’s industrial safety issues from four different perspectives,which include the overall openness of the micro-economy,industrial competitiveness, merger and acquisition by foreign capital and industrial upgrade.It points out six important issues in the process of improving China’s industrial safety.

  17. Integration of generic issues

    International Nuclear Information System (INIS)

    Thatcher, D.

    1989-01-01

    The NRC has recognized the need to integrate generic issues (GIs). The GI process includes a number of phases, all of which should recognize the potential for overlap and conflict among related issues. In addition to the issues themselves, other related NRC and industry programs and activities need to be factored into the GI process. Integration has taken place, or is taking place, for a number of GIs. Each case of integration involves a specific set of circumstances and, as a result, the way in which integration proceeds can vary. This paper discusses the integration of issues in the generic issue process and provides a number of examples

  18. Issues on the energy industry under the yen appreciation; Endakaka ni okeru energy sangyo no kadai. Yoyakuban

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    A tendency toward the rapid yen appreciation since spring 1995 has affected various fields of the economic society of Japan. From a broader view, it is discussed whether the Japanese economic system itself is right or wrong, and that the post-war economic system and regulation system should be largely reviewed. In a short term, the yen appreciation largely affects the export industry and is markedly influential to macro economy. At present, the yen is not as high as that in 1995, but a lot of economists assume a tendency toward medium- and long-term yen appreciation. Therefore, this paper analyzed what kinds of influences the exchange fluctuation brings to the Japanese economy and energy supply/demand. It was clarified what kinds of problems will appear in the energy industry, in particular, on the assumption that the yen will keep high in medium- and long-term. The report consists of parts 1 and 2. Described were `Simulational analysis of yen appreciation` in Part 1 and `Yen appreciation and international issues` in Part 2. 12 figs., 5 tabs.

  19. Environment issues and the future of the transport industry

    Energy Technology Data Exchange (ETDEWEB)

    Shiller, J W [Ford Motor Company, Dearborn, MI (USA)

    1992-01-01

    The motor vehicle industry must make the necessary investment in products and technology to meet the competitive and environmental challenges of the future. Discussion is presented of: the history of motor vehicles, the relationship of motor vehicles to the environment, the state of climate change knowledge, future economic development and the transport sector, the changing structure of the motor vehicle fleet, traffic congestion, alternative fuels, investments in transport, the European Energy Charter, The US Energy Strategy, the North American free trade agreement, and the economics of the automobile industry in Japan/South East Asia and the developing countries. 61 refs., 29 figs., 28 tabs.

  20. Industrial statistics with Minitab

    CERN Document Server

    Cintas, Pere Grima; Llabres, Xavier Tort-Martorell

    2012-01-01

    Industrial Statistics with MINITAB demonstrates the use of MINITAB as a tool for performing statistical analysis in an industrial context. This book covers introductory industrial statistics, exploring the most commonly used techniques alongside those that serve to give an overview of more complex issues. A plethora of examples in MINITAB are featured along with case studies for each of the statistical techniques presented. Industrial Statistics with MINITAB: Provides comprehensive coverage of user-friendly practical guidance to the essential statistical methods applied in industry.Explores

  1. Job Prospects for Industrial Engineers.

    Science.gov (United States)

    Basta, Nicholas

    1988-01-01

    Discusses 1987 statistics from the College Placement Council regarding new job offers to graduating industrial engineers. Identifies trends in hiring in the field. Describes several issues that will face industrial engineers. States that the industrial engineers most likely to win jobs are those with good basic mathematics and communications…

  2. Bargaining issues in Europe: comparing countries and industries

    NARCIS (Netherlands)

    van Klaveren, M.; Tijdens, K.

    2008-01-01

    What drives low pay in Europe? Who and what sectors are affected? Which workers work very long or very short hours and miss out on training opportunities? In this study, produced by the University of Amsterdam/AIAS, these are some of the questions posed for thirteen industries in nine EU member

  3. Issues of the '90s

    International Nuclear Information System (INIS)

    Barber, C.F.

    1990-01-01

    Milt Ward has asked me to say a few words on two issues which have been high on the AMC regulatory agenda for many years--access to the public lands and the environment. Both lie at the interface between mining, an essential industrial activity, and the protection and conservation of other resource values. The operation of the mining law of 1872 has been under public scrutiny for many years. Many in the mining industry have cooperated in the development of workable regulations, realizing that regulation could have the effect of ameliorating the pressure for additional withdrawals or legislation limiting access to the public lands for exploration. Thus by the 1980s, the activities of some explorers and miners which in an earlier day gave rise to justified concern, all but disappeared from Public Lands. There can be no doubt that environmental issues are the most pressing issues confronting the domestic mining and minerals processing industries. Leaders in government willing to take a position on the appropriate balance between measurable costs and presumed benefits of environmental regulations are rare. Thus those of us involved in the creation of wealth for the use and benefit of our fellow men must commit ourselves to the unending task of communicating the benefits of our activities to the public which enjoy those benefits. The mining industry is an industry essential to our way of life. That fact should give us the continuing confidence to demonstrate and to communicate that we are responsible guardians of the world's resources

  4. Regulatory trends in the battery industry

    International Nuclear Information System (INIS)

    McColl, K.G.

    1994-01-01

    The scope of regulations in the battery industry is extensive and also complex. In the future, regulations will become more demanding and will encompass issues not currently considered. Increased focus on environmental issues by government bodies, environmental groups, local communities will result in more strict compliance standards. The USA is currently leading the world's battery industries in the scope and compliance level of regulations. By studying trends in the USA, the rest of the battery industry can prepare itself for the future operating environment. This paper reviews the most critical areas of air pollution, blood-lead levels and recycling. The paper concludes that the battery industry must adopt a culture of exceeding current compliance standards. (orig.)

  5. Natural gas 1995: Issues and trends

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    Natural Gas 1995: Issues and Trends addresses current issues affecting the natural gas industry and markets. Highlights of recent trends include: Natural gas wellhead prices generally declined throughout 1994 and for 1995 averages 22% below the year-earlier level; Seasonal patterns of natural gas production and wellhead prices have been significantly reduced during the past three year; Natural gas production rose 15% from 1985 through 1994, reaching 18.8 trillion cubic feet; Increasing amounts of natural gas have been imported; Since 1985, lower costs of producing and transporting natural gas have benefitted consumers; Consumers may see additional benefits as States examine regulatory changes aimed at increasing efficiency; and, The electric industry is being restructured in a fashion similar to the recent restructuring of the natural gas industry.

  6. Using the WTO/TBT enquiry point to monitor tendencies in the regulation of environment, health, and safety issues affecting the chemical industry.

    Science.gov (United States)

    Pio Borges Menezes, Rodrigo; Maria de Souza Antunes, Adelaide

    2005-04-01

    The growing importance of technical regulation affecting the use and sale of chemical products is a topic of interest not only for the chemical industry, but also for governments, nongovernmental organizations, consumers, and interested communities. The results of such regulation on behalf of the environment, health and safety of individuals, as well as its economic effects on industrial activity, are well understood in the United States and recently in the European Union. In less developed countries, however, the general level of public understanding of these issues is still minimal. It is common knowledge that the so-called "regulatory asymmetry" between countries at different levels of development contributes to the establishment of technical barriers to trade. Such asymmetries, however, also have other impacts: the displacement of polluting industrial sectors to countries which have less demanding regulations, the concentration of unsafe and harmful environmental conditions in certain parts of the globe, and the competitive disadvantage for industries located in countries where control is more rigid. This study analyses information on a wide range of technical regulations issued by World Trade Organization (WTO) members, and focuses on those regulations that affect the chemical industry. This information is available through the WTO Enquiry Points, organizations created in each country to administrate the Technical Barriers to Trade Agreement (TBT). This article consists of an analysis of 4,301 notifications of technical regulations by WTO member states in the 7-year period following the establishment of the WTO in 1995. Starting from this mass of information, 585 notifications that affect the circulation or use of chemical products were isolated. Of this group, 71% refer to only 15 countries. This group of notifications was further classified according to their motivation (the environment, health, safety), by the type of product affected (medications, fuels

  7. Perceptions of job and industry characteristics on career decisions in the hospitality industry

    NARCIS (Netherlands)

    Blomme, R.J.; Tromp, D.M.; Rheede, van A.

    2009-01-01

    This paper reports on the initial results of a case study on management-level turnover in the hospitality industry and on factors influencing the career decisions of highly educated employees to stay or leave the industry. This issue is considered using an interpretative paradigm and the conclusion

  8. Hydrochloric acid: an overlooked driver of environmental change.

    Science.gov (United States)

    Evans, Chris D; Monteith, Don T; Fowler, David; Cape, J Neil; Brayshaw, Susan

    2011-03-01

    Research on the ecosystem impacts of acidifying pollutants, and measures to control them, has focused almost exclusively on sulfur (S) and nitrogen (N) compounds. Hydrochloric acid (HCl), although emitted by coal burning, has been overlooked as a driver of ecosystem change because most of it was considered to redeposit close to emission sources rather than in remote natural ecosystems. Despite receiving little regulatory attention, measures to reduce S emissions, and changes in energy supply, have led to a 95% reduction in United Kingdom HCl emissions within 20 years. Long-term precipitation, surface water, and soil solution data suggest that the near-disappearance of HCl from deposition could account for 30-40% of chemical recovery from acidification during this time, affecting both near-source and remote areas. Because HCl is highly mobile in reducing environments, it is a more potent acidifier of wetlands than S or N, and HCl may have been the major driver of past peatland acidification. Reduced HCl loadings could therefore have affected the peatland carbon cycle, contributing to increases in dissolved organic carbon leaching to surface waters. With many regions increasingly reliant on coal for power generation, HCl should be recognized as a potentially significant constituent of resulting emissions, with distinctive ecosystem impacts.

  9. Noise Pollution--An Overlooked Issue in the Science Curriculum.

    Science.gov (United States)

    Treagust, David F.; Kam, Goh Ah

    1985-01-01

    Discusses the need for including noise pollution in the science curriculum and describes 10 activities for improving students' awareness and understanding of and concern for noise and its effects. (Author/JN)

  10. Weekly Cycles in Daily Report Data: An Overlooked Issue.

    Science.gov (United States)

    Liu, Yu; West, Stephen G

    2016-10-01

    Daily diaries and other everyday experience methods are increasingly used to study relationships between two time-varying variables X and Y. Although daily data potentially often have weekly cyclical patterns (e.g., stress may be higher on weekdays and lower on weekends), the majority of daily diary studies have ignored this possibility. In this study, we investigated the effect of ignoring existing weekly cycles. We reanalyzed an empirical dataset (stress and alcohol consumption) and performed Monte Carlo simulations to investigate the impact of omitting weekly cycles. In the empirical dataset, ignoring cycles led to the inference of a significant within-person X-Y relation whereas modeling cycles suggested that this relationship did not exist. Simulation results indicated that ignoring cycles that existed in both X and Y led to bias in the estimated within-person X-Y relationship. The amount and direction of bias depended on the magnitude of the cycles, magnitude of the true within-person X-Y relation, and synchronization of the cycles. We encourage researchers conducting daily diary studies to address potential weekly cycles in their data. We provide guidelines for detecting and modeling cycles to remove their influence and discuss challenges of causal inference in daily experience studies. © 2015 Wiley Periodicals, Inc.

  11. A Review of International Telecommunications Industry Issues, Structure, and Regulatory Problems.

    Science.gov (United States)

    Cole, Jack E.; And Others

    Industry structure studies prior to 1968 are briefly reviewed, and an overview of industrial and technological developments up to the present is provided through synopses of more recent studies. Areas covered include overseas telephone and record carriers; the creation of the Communications Satellite Corporation; the current regulatory and…

  12. Management, restructuring and industrial relations : organizational change within the United Kingdom broadcasting industry, 1979-2002

    OpenAIRE

    Quinn, Brian J.

    2007-01-01

    In the past decade researchers began to remedy a literature deficit in the study of broadcasting institutions – addressing in particular the issues of labour process, restructuring and industrial relations. This thesis which considers management change, industrial relations and restructuring within the United Kingdom (‘UK’) broadcasting industry employs a case study format with a view to highlighting the variations of industry (macro) and firm (micro) based restructuring. Organizational chang...

  13. Fashion Industry Supply Chain Issues: Zara (Azel France

    Directory of Open Access Journals (Sweden)

    Muhammed Kürşad Özlen

    2013-01-01

    Full Text Available The main purpose of retail business is to continuously maintain the responsiveness to the changing trends in consumer fashion tastes through quickly creating new designs that are suitable for all customers with an affordable price. Hence, the importance of Supply Chain (Management has appeared. The objectives of this study are to analyze the impact of purchasing and supply chain management strategies in retail industry and identify the way of success of AZEL FRANCE Retailer Company of ZARA clothing in Bosnia and Herzegovina from supply chain perspective management by conducting a survey study. AZEL FRANCE is found to be successful in that it can control and streamline the highly consumable fashion items in their supply chains so that they can greatly decrease their lead time and thus increase be responsive enough for fast changes in fashion customer needs and desires by minimizing the industry risks. The retailer stores of AZEL FRANCE are also found to be confident about the future profitability. However, some technical inabilities of the company are also identified. It can be suggested that AZEL FRANCE can easily leverage more its successfully implemented supply chain activities by increasing its technical abilities.

  14. Waste management issues, a set of technologies

    International Nuclear Information System (INIS)

    Gautrot, J.J.

    2000-01-01

    As any other industry, nuclear fuel cycle back-end raises the major issue of waste management. In France, spent fuel is considered as valuable materials and only the ultimate waste are considered as actual waste. Accordingly, waste issue is as follows: a sorting out has to be done, in order to separate valuable materials from actual wastes, put any outlet flow under a stable form and condition them appropriately to their respective recycling or disposal routes. This implies the implementation of a comprehensive set of technologies. Actually, it is an industrial reality, as the COGEMA Group has for a long time set up a reprocessing and conditioning strategy in its plants. Waste management issues are common to many activities. European as well as French regulators already introduced the twofold necessity to reduce waste volumes, and to dispose of only ''ultimate waste'' as concerns industrial and household waste mainly. In this objective, French nuclear reprocessing and recycling industry may be seen as a breeding ground of well-proven technologies and management options. Actually, processes used can also give an answer to such different issues as excess plutonium immobilization, sites cleaning up (including for instance treatment of the liquid HLW legacy), dismantling wastes management. There are a number of operations to be dealt with worldwide that will find a solution in any of the technologies implemented and optimized in COGEMA facilities. Based on the COGEMA Group know-how, the present paper will describe those technologies and explain how they can solve the other stringent waste management issues worldwide. (author)

  15. The nuclear industry and communication: a personal view

    International Nuclear Information System (INIS)

    Morvan, P.

    1989-01-01

    The nuclear industry should not be hesitant in proclaiming its belief that nuclear energy is justifiable politically, economically and ecologically. Some of the basic principles of company communication with the public as they apply to the nuclear industry, are examined. Security is of the utmost importance at all nuclear sites. The commitment to security must be based on mutual confidence between specialists and the public particularly those living in the vicinity of a nuclear plant. A precise scale by which nuclear incidents can be measured must be defined, indicating their degree of seriousness and consequently what should be done. The public must be immediately informed about nuclear accidents by specialists as unequivocally as possible. It is essential that those who work at nuclear plants be confident and proud of their jobs and the company that employs them. It is impossible to establish and maintain good public relations without a permanent flow of information within the company at all levels. The economic factors, such as increased employment opportunities, must not be overlooked either. (author)

  16. Extraction of human factors issues caused by application of the advanced HSI technology and development of human factor issue management system

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Sang Moon; Lee, Jung Woon; Park, Jae Chang; Oh, In Seok [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-01-01

    A comprehensive literature survey was performed in this study to collect human performance issues related to the advanced HSI design features. The literature from not only nuclear industry but also other industries was collected and reviewed. The issues were categorized into the following advanced HSI design features: devices characteristics, levels of automation, information design and management, display management, computerized controls, alarm systems, computerized procedures, staffing and crew coordination, and operator support systems. The classified issues were described with the description framework. Then, the relationship of issues to HSI design process such as human factors analyses, human factors design, and human factors verification and validation was investigated. Finally, the issue management system of server-client environment was developed using Microsoft's Active Server Page technology and Access 97. (author). 18 refs., 6 figs.

  17. Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

    Science.gov (United States)

    Teh, B. T.; Ho, C. S.; Matsuoka, Y.; Chau, L. W.; Gomi, K.

    2014-02-01

    Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis.

  18. Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

    International Nuclear Information System (INIS)

    Teh, B T; Ho, C S; Chau, L W; Matsuoka, Y; Gomi, K

    2014-01-01

    Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis

  19. Fusion Canada issue 20

    International Nuclear Information System (INIS)

    1993-03-01

    Fusion Canada's publication of the National Fusion Program. Included in this issue is the CFFTP Industrial Impact Study, CCFM/TdeV Update:helium pumping, research funds, and deuterium in beryllium - high temperature behaviour. 3 figs

  20. Organization, activities, and issues with particular emphasis on coal

    International Nuclear Information System (INIS)

    Cole, D.R.

    1992-01-01

    The paper discusses Colorado's coal industry; the Colorado Mining Association; lobbying and legislative actions; industry networking, information, and communications; coal issues and activities; and Colorado issues and activities. Some of the latter include: land reclamation of mined lands; oil and gas drilling and coal mine conflicts; wild and scenic river designations; general permitting of coal mining discharges; and coal mine land reclamation awards

  1. Improving policy making through government-industry policy learning: The case of a novel Swedish policy framework

    International Nuclear Information System (INIS)

    Stigson, Peter; Dotzauer, Erik; Yan Jinyue

    2009-01-01

    Climate change poses an unprecedented challenge for policy makers. This paper analyzes how industry sector policy expertise can contribute to improved policy making processes. Previous research has identified that policy making benefit by including non-governmental policy analysts in learning processes. Recent climate and energy policy developments, including amendments and the introduction of new initiatives, have rendered current policy regimes as novel to both governments and the industry. This increases business investment risk perceptions and may thus reduce the effectiveness and efficiency of the policy framework. In order to explore how government-industry policy learning can improve policy making in this context, this article studied the Swedish case. A literature survey analyzed how policy learning had been previously addressed, identifying that the current situation regarding novel policies had been overlooked. Interviews provided how industrial actors view Swedish policy implementation processes and participatory aspects thereof. The authors conclude that an increased involvement of the industry sector in policy design and management processes can be an important measure to improve the effectiveness and efficiency of climate and energy policies

  2. A primer on industrial ecosystems : a strategy for sustainable industrial development

    Energy Technology Data Exchange (ETDEWEB)

    Cote, R P [Dalhousie Univ., Halifax, NS (Canada). Eco-Efficiency Centre; [Dalhousie Univ., Halifax, NS (Canada). Faculty of Management, School for Resource and Environmental Studies

    2003-07-01

    Industrial ecology incorporates ecological theories, functions and limits into the design of industrial production systems, processes and products. The main objective is to enhance environmental and economic performance through collaboration in managing environmental resource issues such as energy, water and materials. Industrial ecology recognizes the connectedness and synergies of materials, products and infrastructure. As such, it considers the life cycle of products, the design of buildings, infrastructure and industrial parks. By working together, businesses gain a collective benefit which is greater than the total of the individual benefits each company could achieve on its own. Industrial ecology also considers the reuse, recovery and recycling of resources. The benefits include: efficiency of resource use; cost reduction for industrial infrastructure; sustainable development support; and, new opportunities in economic development, technology development, manufacturing, and business management. This primer also presents guidelines for win-win projects in industrial ecology. refs., figs.

  3. Offices of Industrial Security International: A Review

    National Research Council Canada - National Science Library

    Sands, W

    1998-01-01

    The Defense Security Service (DSS), formerly the Defense Investigative Service (DIS), handles many of its overseas industrial security issues through its Offices of Industrial Security International...

  4. Product Platform Development in Industrial Networks

    DEFF Research Database (Denmark)

    Karlsson, Christer; Skold, Martin

    2011-01-01

    The article examines the strategic issues involved in the deployment of product platform development in an industrial network. The move entails identifying the types and characteristics of generically different product platform strategies and clarifying strategic motives and differences. Number o...... of platforms and product brands serve as the key dimensions when distinguishing the different strategies. Each strategy has its own challenges and raises various issues to deal with.......The article examines the strategic issues involved in the deployment of product platform development in an industrial network. The move entails identifying the types and characteristics of generically different product platform strategies and clarifying strategic motives and differences. Number...

  5. Business, industrial marketing and uncertainty [Editorial

    OpenAIRE

    Merigó Lindahl, José M.; Gil Lafuente, Anna Maria; Gil Lafuente, Jaime

    2016-01-01

    This special issue of the Journal of Business & Industrial Marketing, entitled "Business, Industrial Marketing and Uncertainty", presents selected extended studies that were presented at the European Academy of Management and Business Economics Conference (AEDEM 2012).

  6. Current issues surrounding the definition of trans-fatty acids: implications for health, industry and food labels.

    Science.gov (United States)

    Wang, Ye; Proctor, Spencer D

    2013-10-01

    The definition of trans-fatty acids (TFA) was established by the Codex Alimentarius to guide nutritional and legislative regulations to reduce TFA consumption. Currently, conjugated linoleic acid (CLA) is excluded from the TFA definition based on evidence (primarily preclinical studies) implying health benefits on weight management and cancer prevention. While the efficacy of CLA supplements remains inconsistent in randomised clinical trials, evidence has emerged to associate supplemental CLA with negative health outcomes, including increased subclinical inflammation and oxidative stress (particularly at high doses). This has resulted in concerns regarding the correctness of excluding CLA from the TFA definition. Here we review recent clinical and preclinical literature on health implications of CLA and ruminant TFA, and highlight several issues surrounding the current Codex definition of TFA and how it may influence interpretation for public health. We find that CLA derived from ruminant foods differ from commercial CLA supplements in their isomer composition/distribution, consumption level and bioactivity. We conclude that health concerns associated with the use of supplemental CLA do not repudiate the exclusion of all forms of CLA from the Codex TFA definition, particularly when using the definition for food-related purposes. Given the emerging differential bioactivity of TFA from industrial v. ruminant sources, we advocate that regional nutrition guidelines/policies should focus on eliminating industrial forms of trans-fat from processed foods as opposed to all TFA per se.

  7. Canada's domestic nuclear issues

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    The Interfaith Program for Public Awareness of Nuclear Issues (IPPANI) is a committee of representatives of religious groups in Toronto, a group of people concerned about the moral and ethical implications of the operation of Canada's nuclear industry and of its exports to other countries. The faith groups represented are the Anglican Diocese of Toronto, the Baha'i Community of Canada, the Jewish Community of Toronto, the Roman Catholic Archdiocese of Toronto and the United Church of Canada Toronto Conference. Wishing to encourage the Canadian government to enquire into this broad question, the faith groups established IPPANI and assigned to it the task of enhancing their knowledge of the nuclear industry. IPPANI was to develop an effective set of questions to be placed before governments and to promote public discussion so that governments might become more responsive to these issues

  8. Program-oriented approach to resource saving issues in construction materials industry

    Directory of Open Access Journals (Sweden)

    Novikova Galina

    2017-01-01

    Full Text Available The construction as a sector of the economy is one of the largest consumers of energy resources, and the building materials industry is today one of the most energy-intensive construction industry. At the enterprises of the building materials industry the different approaches and methods are used to solve resource and energy problems. Energy saving is considered not as an complex approach in the enterprise activity, but as activity for the implementation of specific energy-saving projects, which have limitations in time and in resources. The authors suggest to use a softwareoriented approach to solving the problems of resource and energy saving. For practical application of program-oriented approach we offer to use a structuring method of the decision-making, not previously used to solve problems of resource and energy saving.

  9. Research Article Special Issue

    African Journals Online (AJOL)

    pc

    2017-10-05

    Oct 5, 2017 ... ources and Food Industry, Universiti Sultan ZainalAbidin, 22200 Besut, ... ty problem has become a major issue in Malaysia for the past two decade ... pollution can be defined as contamination of the indoor or outdoor ...

  10. Rett syndrome: an overlooked diagnosis in women with stereotypic hand movements, psychomotor retardation, Parkinsonism, and dystonia?

    Science.gov (United States)

    Roze, Emmanuel; Cochen, Valérie; Sangla, Sophie; Bienvenu, Thierry; Roubergue, Anne; Leu-Semenescu, Smaranda; Vidaihet, Marie

    2007-02-15

    Rett syndrome is an X-linked neurodevelopmental disorder resulting in profound psychomotor retardation. It is usually diagnosed by a pediatrician or pediatric neurologist. Adult neurologists may, therefore, overlook the possibility of Rett syndrome in women with psychomotor retardation of unknown etiology. We report the case of a woman diagnosed with Rett syndrome at age 49 years. This report emphasizes the diagnostic value of movement disorders, including hand stereotypies, Parkinsonism, and dystonia, in adults with Rett syndrome.

  11. Assessment of University- Industry Collaboration and Technology ...

    African Journals Online (AJOL)

    Despite the cultural differences between university and industry, the mutual benefits from collaboration between university and industry have long been recognized in the advanced countries. Recently, the issue of technology transfer and collaboration between universities and industries has been receiving attention in the ...

  12. The international electronics industry.

    Science.gov (United States)

    LaDou, J; Rohm, T

    1998-01-01

    High-technology microelectronics has a major presence in countries such as China, India, Indonesia, and Malaysia, now the third-largest manufacturer of semiconductor chips. The migration of European, Japanese, and American companies accommodates regional markets. Low wage rates and limited enforcement of environmental regulations in developing countries also serve as incentives for the dramatic global migration of this industry. The manufacture of microelectonics products is accompanied by a high incidence of occupational illnesses, which may reflect the widespread use of toxic materials. Metals, photoactive chemicals, solvents, acids, and toxic gases are used in a wide variety of combinations and workplace settings. The industry also presents problems of radiation exposure and various occupational stressors, including some unresolved ergonomic issues. The fast-paced changes of the technology underlying this industry, as well as the stringent security precautions, have added to the difficulty of instituting proper health and safety measures. Epidemiologic studies reveal an alarming increase in spontaneous abortions among cleanroom manufacturing workers; no definitive study has yet identified its cause. Other health issues, including occupational cancer, are yet to be studied. The microelectronics industry is a good example of an industry that is exported to many areas of the world before health and safety problems are properly addressed and resolved.

  13. Sustainable Industrialization in the Building Industry: On the Road to Energy Efficient Construction Management

    DEFF Research Database (Denmark)

    Wandahl, Søren; Ussing, Lene Faber

    2013-01-01

    Since the Brundtland report in 1987, sustainability has been an issue in all parts of the world, and the focus is increasing in these years. In the same period, the building industry has in the same period also been under heavy pressure to increase productivity in the same pace as other manufactu......Since the Brundtland report in 1987, sustainability has been an issue in all parts of the world, and the focus is increasing in these years. In the same period, the building industry has in the same period also been under heavy pressure to increase productivity in the same pace as other...... manufacturing industries. An important question, then, is how well these two highly relevant areas can go hand in hand. By means of comparing the main ideas and drivers behind sustainability and industrialization, respectively, common threads, possible synergies and evident barriers are put forward...... in this discussion paper. The main method is a review to track past merits in the two domains and to detect knowledge gaps that have research potential. A strategic research agenda focusing on energy-efficient construction management is outlined showing the need for future focus on combining industrialization...

  14. Hospitality Management: Perspectives from Industry Advisor

    Directory of Open Access Journals (Sweden)

    Rachel Roginsky

    2013-07-01

    Full Text Available In prior quarterly reports, Pinnacle Advisory Group presented timely updates about the New England lodging industry, which included focused profiles on particular cities. In this issue, the firm offers more general insight about the hospitality industry. Several Pinnacle executives recently participated in a panel discussion about investment, management, and careers in the hospitality industry.

  15. A Future-Oriented, Globally Based Curriculum Model for Industrial Technology.

    Science.gov (United States)

    Hacker, Michael

    1982-01-01

    Presents a future-oriented curriculum approach for industrial technology programs. Major global issues provide the basic structure for curriculum development. These issues include energy management, resource management, technological advancement, and international relations. Rationales for industrial technology are discussed and a curriculum…

  16. Gas industry standards board: Legal considerations in the standard setting process

    Energy Technology Data Exchange (ETDEWEB)

    Mishkin, M.T.; Adelman, D.I.

    1994-01-01

    On December 23, 1993, the Federal Energy Regulatory Commission (FERC) issued Order 563, a Final Rule adopting the agreements of informal industry-wide working groups to standardize information relating to pipeline capacity release programs mandated under Order 636. Order 563 is noteworthy for its reliance upon the industry to develop consensus standards for Commission adoption. The industry's success in reaching agreements on key communication standards issues spawned recommendations from the working groups to continue the development and maintenance of industry-wide standards through a permanent Gas Industry Standards Board (GISB). This article examines legal issues bearing on GISB's potential role in the regulatory process. Specifically, this article addresses constitutional and statutory considerations relating to the FERC's authority to delegate certain responsibilities to a voluntary, industry sponsored and supported private body such as that taking shape within the gas industry.

  17. An industry response to recycle 2000

    International Nuclear Information System (INIS)

    Motl, G.P.; Loiselle, V.

    1996-01-01

    The US DOE is expected to issue a policy early this year articulating DOE's position on the recycle of DOE radioactive scrap metal. In anticipation of this 'Recycle 2000' initiative, the nuclear industry has formed a new trade association called the Association of Radioactive Metal Recyclers (ARMR). This article describes the Recycle 2000 initiative, provides some background on the ARMR and its membership, and identifies industry views on the actions to be taken and issues to be resolved in Recycle 2000 is to become a reality

  18. Representasi Perempuan dalam Industri Sinema

    Directory of Open Access Journals (Sweden)

    Rahmat Edi Irawan

    2014-04-01

    Full Text Available Studies on the presence and the role of women in film industry are interesting to observe. Physically, women exist and play role in the world of film industry, as old as the film itself. In terms of quantity, the number of women seen on screen is also not inferior to men seen in the film. The issue is precisely whether the presence and nearly with the same quantity with men, women are enough to give meaning to the quality of the film itself. Article used literature study, to see how the literatures interrelate several theories of mass communication, especially those raised on the issue of representation. Conclusions or results of the study for this paper are women’s presence and participation as well as comparable quantity of them with men in film industry do not have a lot contribution to the improvement of the quality of the film industry itself. This relates to the women who exist and participate in the film industry rely only on certain physical size of the body and woman is only as a complement to sweeten the mere presence of a movie. 

  19. Some perspectives on the electric industry

    Energy Technology Data Exchange (ETDEWEB)

    Winer, J.H. [Mountain Energy, Inc., South Burlington, VT (United States)

    1996-12-31

    Opinions regarding future directions of the U.S. electric utility industry are presented in the paper. Pertinent historical aspects and current industry rules are summarized. Major issues and trends in the electricity market are outlined, and recommendations are presented. It is concluded that new rules in the industry will be set directly by customers, and that customers want renewable energy resources.

  20. Psychiatric disorders are overlooked in patients with drug abuse.

    Science.gov (United States)

    Kruckow, Line; Linnet, Kristian; Banner, Jytte

    2016-03-01

    Psychiatric disease is overlooked in drug users. Patients with both drug abuse and a psychiatric disease - dual diagnosis - suffer decreased compliance to treatment and decreased life expectancy compared with single-diagnosis patients. Identifying the patients among either drug addicts or mentally ill patients is difficult. All drug addicts autopsied at the Department of Forensic Medicine, University of Copenhagen, Denmark, in the years 1992, 2002 and 2012 were included. The group was divided into two subpopulations of possible dual diagnosis patients either according to police reports stating mental illness or to psychotropics found in the toxicology screening after autopsy. We found a rise in possible mental illness in both subpopulations in the study period. Drug addicts with psychotropics in the blood at the time of death increased from 3.1% in 1992 to 48.1% in 2012, and this group was significantly younger at the time of death than those without psychotropics in the blood. Suspected dual diagnosis patients have increased in number. They die earlier than their drug addict counterparts. Methadone remains the leading cause of death in all subpopulations. Possible causes are misuse of treatment and/or illegally bought methadone, wrongly assigned cause of death due to unknown tolerance and/or polydrug toxicity in combination with psychotropic medicine. none. not relevant.

  1. Mitigating delay and non-payment in the Malaysian construction industry

    Science.gov (United States)

    Mohamad, N.; Suman, A. S.; Harun, H.; Hashim, H.

    2018-02-01

    Construction industry is one of the industries that have contributed towards the rapid growth of development and economics in Malaysia. However, the industry is inundated with delay and non-payment issues between the two parties in contract that is the clients and contractors Even though there are contractual and administrative provisions in the standard forms of contract in Malaysia regarding payments, delay and non-payment issues still occur between them. The aim of the study is to develop measures to mitigate delay and non-payment issues between contractors and clients in the Malaysian construction industry. Questionnaire survey was conducted with clients and contractors in Klang Valley. Results from data analysis identified significant measures to mitigate delay and non-payment issues between contractors and clients which include contractors should submit their progress work invoicing with adequate documents; contractors should follow up constantly with client regarding payment; proper understanding of requirements with regards to payment; mutual discussion of problems with client to address problems in a timely manner and proper use of payment provisions in the standard form of contract. This study is significant to contractors and clients and to other construction players in order to reduce and minimise delay and non-payment issues for the growth of economy in the Malaysian construction industry.

  2. Industry characteristics management of innovative processes at the enterprises of light industry

    OpenAIRE

    Yusupov, Ulugbek

    2015-01-01

    This article considers the issues of innovative development and management of innovative processes in the knitting industry of Uzbekistan. Analyzed the main directions of innovative processes and provides recommendations for their management.

  3. Working With Plantation Communities: A Reflection of Social Issues

    Directory of Open Access Journals (Sweden)

    Abdul Rahman Saili

    2013-04-01

    Full Text Available Abstract The plantation industry in Malaysia is aggressively expanding over the past decade driven by global demands for palm oil as a food staple and more recently bio fuels. The rapid growth in the industry is heavily dependent upon high labour and workforce. Such intensity has carried out social impact on the communities including plantation workers, small holders and their dependents. Therefore, this paper will outline what appear to be never ending issues impetus social problems. Ethnic conflict, fighting, gambling, alcohol abuses are only a few issues that call for immediate multi-action plan from all involved stakeholders. Those issues can be the causes as well as the effects. The contributing factors form a chain reaction to the whole social dynamics in the plantation’s climate.The main aim is hence to breach the gap between industries, practitioners, and academicians in order to develop the competencies of the next generation social workers. They can play their roles in tackling the social issues, taking into account the different contexts and environment.

  4. Industries and environment - 2014 edition

    International Nuclear Information System (INIS)

    Maurice, Delphine

    2014-04-01

    After a general overview of the French economic context (composition of the French industry, the manufacturing industry, industry production and trade balance), this report presents industrial installations with risks: installations classified for the protection of the environment and submitted to industrial authorizations (ICPEA), basic nuclear installations, Seveso industrial facilities, IPPC industrial installations. The next part analyzes the various pressures exerted by the industry on the environment: material production and consumption, water taking, consumption of energetic products, release of pollutants in waters of industrial ICPE, releases in the air, greenhouse gas emissions, production of wastes, accidents and incidents with environmental consequences, polluted sites and soils, hazardous chemical products in the industry, industrial companies involved in nano-technologies and nano-materials. The last part proposes an overview of responses to these issues: implementation of environmental management system, corporate societal responsibility, investments and expenditures for the protection of the environment, industrial eco-activities, eco-labelled products manufactured by the industry

  5. Economic aspects of management of oil industry

    International Nuclear Information System (INIS)

    Purina, I.; Sipkovs, P.

    1997-01-01

    Oil industry is characterised by huge and long-term capital investments. This is one of the most specific features of the industry which has to be taken into account during the preparation of oil industry management framework by the state institutions. This article covers specific issues of cash flows and risks intrinsic in the oil industry projects as well as economic instruments to be applied. (author)

  6. An overlook of the new global nuclear scenario and the emergent challenges

    International Nuclear Information System (INIS)

    Solanilla, Roberto B.A.

    2007-01-01

    The aim of this paper is to make a short overlook of the world nuclear renaissance and point out some emergent challenges. The presentation covers different subjects in which the nuclear energy shows great advantage to face concerns about climate change, energy demand growth, and relative cost of competing technologies in a global scenario. Additionally nuclear technology can deploy in a middle term an important potential development oriented to improve even more that nuclear design, safety, environment protection, economic and sustainability of the present nuclear reactors generation. The world nuclear energy scenario reveals a renaissance after a long period of lethargy. Now is the focus of considerable attention and debate about the risks and benefits of its expansion. Many countries are again planning ambitious nuclear programs. In the case of Argentina, a decision was taken to end the construction of Atucha 750 MWe power plant (NPP) and to begin the construction of another two NPP in the next decade. In the middle term and expansion of 60 % of the present world nuclear capabilities is foreseen. For the long term there could be much more if today's performance data is maintained or improved. It would require the nuclear industry to return immediately to the most rapid period of growth experienced in the past. The training of the young people is also an important challenge. But some countries are still reluctant due to the adverse local public opinion. In spite of the great accessibility and availability of the NPP confirmed by the global experience of the 350 operating nuclear power plants, the public acceptability is not confirmed. Some sectors of the society -with the support in some case of the media- are against the use of the nuclear energy. In this paper some reasons of the public concerns is explained and actions are mentioned to change its perceptions. At the end, the global society in front of the real means available to fulfill the growing energy

  7. Product and Service Directory 2004 Issue

    International Nuclear Information System (INIS)

    Agnihotri, N.K.

    2003-01-01

    This annual November-December issue of the Nuclear Plant Journal serves as directory of information resources on products and services related to the nuclear power industry. The directory consists of over 3,000 products and services submitted by over 300 suppliers worldwide during October and November 2003. The issue is divided into 4 main areas: Products and Services, Corporate Capabilities, and Suppliers

  8. Gas transportation issues in the WCSB

    International Nuclear Information System (INIS)

    Turner, M.

    1998-01-01

    This paper addressed the issue of the competitiveness of the Western Canadian Sedimentary Basin (WCSB), concentrating on transportation issues. Various related issues such as natural gas pricing dynamics, price convergence in late 1998, projected gas revenues, issues of supply and demand, reserves inventory, the worrisome rate of decline in well productivity, deliverability and drilling, all received attention. Despite the gloomy picture, the general conclusion was that industry activity in the Basin will need to increase as the growth of the WCSB will be driven by rising North American demand. A profile of Nova Gas Transmission Ltd. was also presented. 1 tab., 13 figs

  9. An overlooked environmental issue? A review of the inadvertent formation of PCB-11 and other PCB congeners and their occurrence in consumer products and in the environment.

    Science.gov (United States)

    Vorkamp, Katrin

    2016-01-15

    Polychlorinated biphenyls (PCBs) are banned from production and use in most countries as they are persistent organic pollutants (POPs) of concern for environment and health. Recent research has pointed at a new environment issue resulting from the inadvertent formation of PCBs in certain processes, in particular the pigment production. PCB-11 is a major by-product in these processes, but PCB-28, PCB-52, PCB-77 as well as the nonachlorinated PCBs and PCB-209 have been found in pigments and consumer products as well. In addition to environmental emissions via point sources, in particular related to industrial and municipal wastewater, atmospheric transport seems to be important for the global distribution of PCB-11. Thus, PCB-11 has also been detected in the polar regions. Worldwide air concentrations appear relatively uniform, but maxima have been found in urban and industrialised areas. Data on the uptake and accumulation of PCB-11 in the food chain are still inconclusive: Although food web studies do not show biomagnification, PCB-11 has been detected in humans. The human exposure might originate from the direct contact to consumer products as well as from the omnipresence of PCB-11 in the environment. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Managing environmental issues at large-scale industrial estates: Problems and initiatives in central and eastern Europe and the former Soviet Union

    International Nuclear Information System (INIS)

    Coyle, R.

    1996-01-01

    A great many large-scale industrial sites are undergoing major transformation and restructuring in central and eastern Europe and the former Soviet Union. The EBRD's portfolio of investment projects increasingly includes such sites, presenting the Bank with environmental challenges related to their size, complexity and history. Both technological improvements and changes in management structure are needed in order to address environmental, and health and safety, issues. The EBRD requires ''environmental due diligence'' on all of its projects under preparation. Requirements vary, depending on the nature of each project. (author)

  11. Competitive assessment of the US: Renewable energy equipment industry

    Energy Technology Data Exchange (ETDEWEB)

    1984-12-01

    This report is a competitive assessment of the U.S. renewable energy equipment industry. The contents include: Definition of technologies; Industry characteristics; Historical perspectives; Industry performance; Trends and projections; The world marketplace; and Issues and options.

  12. Natural gas 1994: Issues and trends

    International Nuclear Information System (INIS)

    1994-07-01

    This report provides an overview of the natural gas industry in 1993 and early 1994 (Chapter 1), focusing on the overall ability to deliver gas under the new regulatory mandates of Order 636. In addition, the report highlights a range of issues affecting the industry, including: restructuring under Order 636 (Chapter 2); adjustments in natural gas contracting (Chapter 3); increased use of underground storage (Chapter 4); effects of the new market on the financial performance of the industry (Chapter 5); continued impacts of major regulatory and legislative changes on the natural gas market (Appendix A)

  13. Natural gas 1994: Issues and trends

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This report provides an overview of the natural gas industry in 1993 and early 1994 (Chapter 1), focusing on the overall ability to deliver gas under the new regulatory mandates of Order 636. In addition, the report highlights a range of issues affecting the industry, including: restructuring under Order 636 (Chapter 2); adjustments in natural gas contracting (Chapter 3); increased use of underground storage (Chapter 4); effects of the new market on the financial performance of the industry (Chapter 5); continued impacts of major regulatory and legislative changes on the natural gas market (Appendix A).

  14. Defense Industrial Base: An Overview of an Emerging Issue

    Science.gov (United States)

    1993-03-01

    supplies it needs to rapidly increase the production of weapons and supporting equipment in wartime. This lack of access is primarily considered a...ommittete on Technology and Securily , ,Joint Econonue Committee, we are attempting Io develop a proposed analytical framework for assessing the national...industry’s continuing ability to develop and produce weapon systems using the most advanced technology. According to recent studies, a growing number

  15. Research Article Special Issue

    African Journals Online (AJOL)

    2016-05-15

    May 15, 2016 ... ABSTRACT. In megacities, exposure to high concentrations of air pollution, as a major concern on public health, is being felt worldwide problem. The issue of particulate matter especially the PM2.5 has become extremely crucial in Tehran, due to industrialization and population growth. Therefore, it.

  16. Issues in recycling galvanized scrap

    Energy Technology Data Exchange (ETDEWEB)

    Koros, P.J. [LTV Steel Co., Inc., Cleveland, OH (United States); Hellickson, D.A. [General Motors Corp., Detroit, MI (United States); Dudek, F.J. [Argonne National Lab., IL (United States)

    1995-02-10

    The quality of the steel used for most galvanizing (and tinplate) applications makes scrap derived from their production and use a premier solid charge material for steelmaking. In 1989 the AISI created a Task Force to define the issues and to recommend technologically and economically sound approaches to assure continued, unhindered recyclability of the growing volume of galvanized scrap. The AISI program addressed the treatment of full-sized industrial bales of scrap. The current, on-going MRI (US)--Argonne National Laboratory program is focused on ``loose`` scrap from industrial and post-consumer sources. Results from these programs, issues of scrap management from source to steel melting, the choices for handling zinc in iron and steelmaking and the benefits/costs for removal of zinc (and lead) from scrap prior to melting in BOF and foundry operations are reviewed in this paper.

  17. Geothermal industry assessment

    Science.gov (United States)

    1980-07-01

    Focus is on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews and with executives of 75 companies active in the field.

  18. THOSE ISSUES AND MANAGEMENT ACCOUNTING PRINCIPLES IN THE ORGANIZATION ENTITIES MILK INDUSTRY

    Directory of Open Access Journals (Sweden)

    GEORGETA-MIHAELA ZAHARIA (CRIVAC

    2010-01-01

    Full Text Available This paper aims to highlight the features of the entities in the dairy industry. At first, a brief description of the dairy industry in Romania, giving priority factors that contribute to the development of this market. As in any economic unit, organization of management accounting and cost calculation is particularly important activity managers are required to study all factors and exercise influence principles, their implications, and then, taking account of them to choose the most appropriate form of organization of management accounting and cost calculation. Were analyzed and described in the study, factors and principles that characterize the entities in the dairy industry and have an influence in the organization of management accounting, but also in determining costs.

  19. Emulsified industrial oils recycling

    Energy Technology Data Exchange (ETDEWEB)

    Gabris, T.

    1982-04-01

    The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

  20. Environmental safety issues for semiconductors (research on scarce materials recycling)

    International Nuclear Information System (INIS)

    Izumi, Shigekazu

    2004-01-01

    In the 21st century, in the fabrication of various industrial parts, particularly, current and future electronics devices in the semiconductor industry, environmental safety issues should be carefully considered. We coined a new term, environmental safety issues for semiconductors, considering our semiconductor research and technology which include environmental and ecological factors. The main object of this analysis is to address the present situation of environmental safety problems in the semiconductor industry; some of which are: (1) the generation and use of hazardous toxic gases in the crystal growth procedure such as molecular beam epitaxy (MBE) and metalorganic chemical vapor deposition (MOCVD), (2) the generation of industrial toxic wastes in the semiconductor process and (3) scarce materials recycling from wastes in the MBE and MOCVD growth procedure

  1. Coalbed methane produced water in China: status and environmental issues.

    Science.gov (United States)

    Meng, Yanjun; Tang, Dazhen; Xu, Hao; Li, Yong; Gao, Lijun

    2014-01-01

    As one of the unconventional natural gas family members, coalbed methane (CBM) receives great attention throughout the world. The major associated problem of CBM production is the management of produced water. In the USA, Canada, and Australia, much research has been done on the effects and management of coalbed methane produced water (CMPW). However, in China, the environmental effects of CMPW were overlooked. The quantity and the quality of CMPW both vary enormously between coal basins or stratigraphic units in China. The unit produced water volume of CBM wells in China ranges from 10 to 271,280 L/well/day, and the concentration of total dissolved solids (TDS) ranges from 691 to 93,898 mg/L. Most pH values of CMPW are more than 7.0, showing the alkaline feature, and the Na-HCO3 and Na-HCO3-Cl are typical types of CMPW in China. Treatment and utilization of CMPW in China lag far behind the USA and Australia, and CMPW is mainly managed by surface impoundments and evaporation. Currently, the core environmental issues associated with CMPW in China are that the potential environmental problems of CMPW have not been given enough attention, and relevant regulations as well as environmental impact assessment (EIA) guidelines for CMPW are still lacking. Other potential issues in China includes (1) water quality monitoring issues for CMPW with special components in special areas, (2) groundwater level decline issues associated with the dewatering process, and (3) potential environmental issues of groundwater pollution associated with hydraulic fracturing.

  2. Ethics and the oil industry

    International Nuclear Information System (INIS)

    Bauquin, P.R.

    2001-01-01

    In many countries public opinions are more and more sensitive to ethical issues linked to the manner in which industries and particularly oil companies behave. Oil companies are frequently unpopular, among the public both in producing and consuming countries. After a brief analysis of the reasons for this unpopularity, the author attempts to show both the ambiguities surrounding the question of ethics, and its complexity. This is especially true when oil companies have to work in countries which are destabilized, and in which disturbances - or even civil wars - may be fuelled by the important revenue streams resulting from the oil production. The various ethical issues are reviewed, from human rights to political interference, without omitting global or local environmental problems. Despite the very deep roots of the various issues the author believe some progress is achievable and advocates that the oil industry lead the way in this difficult domain. (author)

  3. Developments in the North American gas services business

    International Nuclear Information System (INIS)

    Haughey, D.J.

    1995-01-01

    The gas services business sector was briefly defined. Emerging issues of the business were reviewed as seen from the vantage point of Westcoast Gas Services Inc. The traditional gas market was described as one in which marketer's credit was overlooked, formal risk management was not employed, unpriced imbedded options were common, there was little capital investment, and there were no cash trading exchanges. Specific industry forces and customer needs were said to have created a powerful driving force which will fundamentally change this outdated framework of the gas service industry. Two key issues were said to emerge from this renewal. One of these is risk management, the other is the need for major ongoing investments. Skilled people, scale and scope of the business, transactional excellence, credit worthiness and systems technology were the other forces driving the upcoming transformation of the industry during the next few years

  4. Proposed industrial recovered materials utilization targets for the metals and metal-products industry

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-05-01

    The introductory chapter provides a discussion of the factors that affect the recovery and reuse of secondary materials and the competition between the primary and secondary metals industries. It discusses these industries in terms of resource characteristics, industry technology, pollution control requirements, market structure, the economics of recycling, and the issues involved in econometrically estimating scrap supply response behavior. It further presents the methodology established by DOE for the metals, textiles, rubber, and pulp and paper industries. The areas in which government policies might have a significant impact on the utilization of primary and secondary metals and on any recycling targets between now and 1987 are noted. Chapter 3 presents general profiles for the major industrial segments comprising SIC 33. The profiles include such topics as industry structure, process technology, materials and recycling flow, and future trends. Chapter 4 specifically covers the evaluation of recycling targets for the ferrous, aluminum, copper, zinc, and lead industries. (MCW)

  5. Fusion Canada issue 22

    International Nuclear Information System (INIS)

    1993-10-01

    A short bulletin from the National Fusion Program highlighting in this issue a bi-lateral meeting between Canada and Japan, water and hydrogen detritiation, in-situ tokamak surface analysis, an update of CCFM/TdeV and tritium accounting Industry guidance in Fusion, fast probe for plasma-surface interaction. 4 figs

  6. Fusion Canada issue 22

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-10-01

    A short bulletin from the National Fusion Program highlighting in this issue a bi-lateral meeting between Canada and Japan, water and hydrogen detritiation, in-situ tokamak surface analysis, an update of CCFM/TdeV and tritium accounting Industry guidance in Fusion, fast probe for plasma-surface interaction. 4 figs.

  7. Examination of issues related to the development and implementation of real-time operational safety monitoring tools in the nuclear power industry

    International Nuclear Information System (INIS)

    Puglia, William J.; Atefi, Bahman

    1995-01-01

    In recent years, risk and reliability techniques have been increasingly used to optimize deterministic requirements and to improve the operational safety of nuclear power stations. This paper discusses the historical development and current status of implementation of real-time operational safety monitoring tools in the nuclear power industry worldwide. A safety monitor is defined as a PC-based risk management tool, based on a plant specific PSA, which can be used to manage plant safety during the day-to-day operation of a nuclear power plant by planning maintenance activities and providing advisory information to plant operational staff in order to avoid high risk plant configurations. As this technique has only been applied in a few plants worldwide, the technology is still evolving and there are several technical and implementation-related issues which still need to be resolved. This paper attempts to summarize all such issues and describe how they have been addressed in several different applications of this technology around the world

  8. Model Pengembangan Produktivitas Perajin Industri Bidai Di Wilayah Perbatasan

    Directory of Open Access Journals (Sweden)

    Maria Christiana Iman Kalis

    2015-08-01

    Full Text Available Social and economic phenomena seen among the various efforts to develop culture-basedhandicraft industry. Several groups of small business industry looks continue to live but with thecondition that no maximum. The quality of labor in the industry is determining the level ofproductivity of the industry output.Industry sector is the sector that absorbs labor andemployment issues is a crucial issue especially when it comes to productivity. This is due to theproductivity can be achieved when workers have a willingness to work with a boost in selfworker.Work will occur if the labor needs of both physical and non-physical being met. In thisstudy, the element of productivity is measured is associated with the quality of workerseducational level, expertise, skills and labor in handicraft industry studied where this industry isbuilt upon the characteristics of the local culture by low adoption of technologies that are likelyto improving the entrepreneurial skills.

  9. Special number issued in commemoration of 10th anniversary of NEDO's industrial technology research and development department; NEDO sangyo gijutsu kenkyu kaihatsu bumon 10 shunenshi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    This special number is issued in commemoration of 10th anniversary of NEDO's industrial technology research and development department, to look back its R and D activity results and help the future projects. This department was established in 1988, based on the Law of Establishment of the Industrial Technology Research and Development System, and started its activities as the central institute for positively promoting the R and D of the industrial technologies, centered by the basic and advanced areas, while in closely cooperation with oversea institutes. During this period, the department has been pursuing various projects, including large-scale industrial technology R and D projects transferred from the Agency of Industrial Science and Technology; R and D projects for technologies for the industrial bases of the next generation and medical/welfare equipment technologies; projects for assistance to international cooperative research teams; projects for establishing facilities as research bases necessary for promoting R and D of advanced industrial technologies; and, more recently, projects for establishing measures to cope with global environmental problems. NEDO has been playing a role of managing and controlling various large-size R and D projects, both in name and reality, taking over the projects which had been promoted by the Agency of Industrial Science and Technology. This special number outlines the R and D projects NEDO has pursued in the past 10 years. (NEDO)

  10. Studying the features of industrial tourism development and ...

    African Journals Online (AJOL)

    Study methods: The key method of studying this issue is a content analysis of the websites of organizations involved in the system of industrial tourism ... districts, and information on the excursions to industrial enterprises in the media; the survey results of industrial enterprises and consumers of tourism facilities are provided ...

  11. Issues in Coastal Zone Management.

    Science.gov (United States)

    Davis, Derrin

    1992-01-01

    Addresses the following issues relevant to coastal zone management: overcrowding, resource exploitation, pollution, agriculture, fisheries, industrial, and other uses. Describes conflicts and trade-offs in management typified by fragmented agency decision making. Discusses implications of the greenhouse effect, sustainable development, and the…

  12. Some issues in ownership structure and corporate governance

    Directory of Open Access Journals (Sweden)

    K.A. Darshana Lakmal

    2014-10-01

    Full Text Available Corporate governance is a process that aims to allocate corporate resources in a manner that maximizes value for all stakeholders — shareholders, investors, employees, customers, suppliers, environment and the community at large and holds those at the helms to account by evaluating their decisions on transparency, inclusivity, equity and responsibility. Corporate governance has been commonly defined as the rules and procedures in place for governing an organization. It is the set of processes, customs, policies, laws, and institutions affecting the way a corporation (or company is directed, administered or controlled. Corporate governance also includes the relationships among the many stakeholders involved and the goals for which the corporation is governed. Corporate governance principles and codes have been developed in different countries and issued from stock exchanges, corporations, institutional investors, or associations (institutes of directors and managers with the support of governments and international organizations. As a rule, compliance with these governance recommendations is not mandated by law, although the codes linked to stock exchange listing requirements may have a coercive effect. However, given the rapid developments within the field and the increasing prominence of corporate governance in the modern world, this definition may be considered too narrow. Corporate governance, while a topic that has been examined in considerable depth in many areas, is widely applicable to a vast array of topics and issues. This study contributes to the literature by extending the mainly based on board literature to where there are important institutional differences and issues in ownership structure and corporate governance system and seeks to address new and emerging issues which have yet to be closely examined and have, to a degree, been overlooked

  13. Industrial Partnership Prosperity Game{trademark}

    Energy Technology Data Exchange (ETDEWEB)

    Boyak, K.; Berman, M.; Beck, D.

    1998-02-01

    Prosperity Games TM are an outgrowth and adaptation move/countermove and seminar War Games. Prosperity Games TM are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education, and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games TM are unique in that both the game format and the player contributions vary from game to game. This report documents the Industry Partnership Prosperity Game sponsored by the Technology Partnerships and Commercialization Center at Sandia National Laboratories. Players came from the Sandia line organizations, the Sandia business development and technology partnerships organizations, the US Department of Energy, academia, and industry The primary objectives of this game were to: explore ways to increase industry partnerships to meet long-term Sandia goals; improve Sandia business development and marketing strategies and tactics; improve the process by which Sandia develops long-term strategic alliances. The game actions and recommendations of these players provided valuable insights as to what Sandia can do to meet these objectives.

  14. Educating Maritime Engineers for a Globalised Industry - Bridging the Gap Between Industry and Universities

    DEFF Research Database (Denmark)

    Andersen, Ingrid Marie Vincent; Nielsen, Ulrik Dam

    2012-01-01

    In Denmark, the maritime engineering competences requested by the industry have changed in the past one to two decades. The typical naval architects do no longer find themselves working in the ship-building industry but rather in the industry of ship operators, consultancies, class societies, etc....... This means that universities educating maritime engineers need to reflect the changes in the curricula for their maritime engineering students. Topics and issues regarding this matter have recently been addressed in a survey made in the Danish maritime industry. The survey concludes that the demand...... for maritime engineers in the industry is considerably larger than the output from the technical universities. Moreover, it sets forth a series of recommendations to the industry as well as to the universities to facilitate meeting the demand for maritime engineers in Denmark in the future. The recommendations...

  15. Post 9-11 Security Issues for Non-Power Reactor Facilities

    International Nuclear Information System (INIS)

    Zaffuts, P. J.

    2003-01-01

    This paper addresses the legal and practical issues arising out of the design and implementation of a security-enhancement program for non power reactor nuclear facilities. The security enhancements discussed are derived from the commercial nuclear power industry's approach to security. The nuclear power industry's long and successful experience with protecting highly sensitive assets provides a wealth of information and lessons that should be examined by other industries contemplating security improvements, including, but not limited to facilities using or disposing of nuclear materials. This paper describes the nuclear industry's approach to security, the advantages and disadvantages of its constituent elements, and the legal issues that facilities will need to address when adopting some or all of these elements in the absence of statutory or regulatory requirements to do so

  16. Post 9-11 Security Issues for Non-Power Reactor Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Zaffuts, P. J.

    2003-02-25

    This paper addresses the legal and practical issues arising out of the design and implementation of a security-enhancement program for non power reactor nuclear facilities. The security enhancements discussed are derived from the commercial nuclear power industry's approach to security. The nuclear power industry's long and successful experience with protecting highly sensitive assets provides a wealth of information and lessons that should be examined by other industries contemplating security improvements, including, but not limited to facilities using or disposing of nuclear materials. This paper describes the nuclear industry's approach to security, the advantages and disadvantages of its constituent elements, and the legal issues that facilities will need to address when adopting some or all of these elements in the absence of statutory or regulatory requirements to do so.

  17. Photovoltaics for Buildings: Key Issues in Pursuit of Market Readiness

    International Nuclear Information System (INIS)

    Sheila, J.; Hayter, P.E.

    1998-01-01

    The photovoltaic (PV) industry is rapidly beginning to recognize the market potential of the buildings sector. New PV-for-buildings products have recently become commercially available, and numerous products that are under development will be introduced within the next 5 years. To ensure that these new products will be adopted and used in common building practices, the PV industry should recognize and address important buildings industry issues. These issues include building codes and standards, after-market servicing, education, and warranties and insurance policies. Photovoltaic systems are also still very expensive. The simplest method for increasing their value for a building is to decrease the building's electrical loads through energy efficiency and conservation. Meeting these goals can only be accomplished through partnerships with the U.S. Department of Energy (DOE), private industry, and public institutions

  18. Uranium mining - what are the issues

    International Nuclear Information System (INIS)

    Dory, A.B.

    1982-03-01

    The author discusses the effects of uranium mining on worker health and the environment, describes methods of handling mill tailings, and compares risks to the public from radiation with risks from non-nuclear energy sources. Information on nuclear issues in the news media is often sensationalistic; the public needs an open, honest information flow from industry, the scientific community, and government to reach a rational perception of the issues and risks

  19. Editorial of the Special Issue Antimicrobial Polymers

    Directory of Open Access Journals (Sweden)

    Iolanda Francolini

    2013-09-01

    Full Text Available The special issue “Antimicrobial Polymers” includes research and review papers concerning the recent advances on preparation of antimicrobial polymers and their relevance to industrial settings and biomedical field. Antimicrobial polymers have recently emerged as promising candidates to fight microbial contamination onto surfaces thanks to their interesting properties. In this special issue, the main strategies pursued for developing antimicrobial polymers, including polymer impregnation with antimicrobial agents or synthesis of polymers bearing antimicrobial moieties, were discussed. The future application of these polymers either in industrial or healthcare settings could result in an extremely positive impact not only at the economic level but also for the improvement of quality of life.

  20. The competitive environment of the North American energy marketing industry

    International Nuclear Information System (INIS)

    Tonkin, S.L.

    1999-01-01

    Various issues regarding U.S. wholesale energy marketing were discussed with particular emphasis on how energy marketing is changing industries in North America. In 1998, the energy industry reported a growth in revenue of 26 per cent despite declining natural gas prices. It was emphasized that several major competitive issues need to be addressed by industry competitors in order to operate in this unpredictable market. These issues include profitability, market volatility and mergers and acquisitions. This paper presented a list of the top 10 North American Energy marketers in 1998. Although the number of marketers in the energy sector continues to grow, it is expected that the numbers will decline significantly within three years. This will be due mostly to the continuation of major mergers and acquisitions. It was concluded that in general, energy marketing may become an even more attractive industry because of increasing operating margins. 5 tabs., 2 figs

  1. Fifteenth National Industrial Energy Technology Conference: Proceedings

    International Nuclear Information System (INIS)

    1993-01-01

    This year's conference, as in the past, allows upper-level energy managers, plant engineers, utility representatives, suppliers, and industrial consultants to present and discuss novel and innovative ideas on how to reduce costs effectively and improve utilization of resources. Papers are presented on topics that include: Win-win strategies for stability and growth and future success, new generation resources and transmission issues, industry and utilities working together, paper industry innovations, improving energy efficiency, industrial customers and electric utilities regulations, industrial electro technologies for energy conservation and environmental improvement, advances in motors and machinery, industrial energy audits, industrial energy auditing, process improvements, case studies of energy losses, and industrial heat pump applications. Individual papers are indexed separately

  2. The petrochemical industry and its energy use. Prospects for the Dutch energy intensive industry

    International Nuclear Information System (INIS)

    Gielen, D.J.; Vos, D.; Van Dril, A.W.N.

    1996-04-01

    The current state and the future of the Dutch petrochemical industry are discussed. First, its current energy use, technology and its markets are analysed. Competitiveness of Dutch and Western European producers compared to foreign producers is shown. Main technological developments and other key issues (e.g. environmental issues) are discussed. Based on this analysis, a future scenario is derived for petrochemical industrial energy use for the period 2000-2015. This case study can be divided into an analysis of the current situation (Chapter 2-6) and alternatives for production and energy consumption of the Dutch petrochemical industry within its Western European context (Chapter 7-11). Chapter 2 analyses the current production structure and the historical developments. Chapter 3 discusses current technologies. Chapter 4 analyses markets for Dutch petrochemical products. Chapter 5 analyses the industry economics in the Netherlands in terms of costs and revenues. Chapter 6 provides information on institutional factors that influence industrial activities. Chapter 7 discusses global competition with special emphasis on competition for the European market. Chapter 8 analyses potential technology shifts. In Chapter 9, data from the preceding chapters on markets, competition, structure and technology are combined to compare competing production options. This is followed by a sensitivity analysis in Chapter 10. Based on a production volume forecast and the development of energy intensity of production, energy consumption of the Dutch petrochemical industry is forecast in Chapter 11. Finally, Chapter 12 provides conclusions and policy recommendations. 24 figs., 48 tabs., 103 refs., 2 appendices

  3. Need of risk management practice amongst bumiputera contractors in Malaysia construction industries

    Science.gov (United States)

    Syuhada Fadzil, Nur; Noor, Nurazuwa Md; Rahman, Ismail Abdul

    2017-11-01

    Malaysia construction industry has been growing continuously with double-digit growth for the past two decades. There are many issues surrounded the industry such as delay in delivery, cost overrun, quality and safety. In bumiputera contractor’s context, the literature review found that 32 issues were encountered in the construction project. These issues can be handled properly with the application of risk management. According to previous researchers, application of risk management in Malaysia construction industry is at the low level where it is implemented in traditional ways that are brainstorming and checklist. These were due to lack of knowledge, the high cost of hiring experts and avoiding extra cost. Besides that, this study also intentions to analyse the risk categories in the construction industry as well as identify risk management process to resolve the construction issues. Hence, this paper presents issues engulfed by Bumiputera contractors which can partly be resolved by applying risk management practice in carrying out the construction activity. This may inspire the contractors to apply the risk management practice in ensuring the success of their construction project.

  4. Priority issues affecting operators' and suppliers' liens: the Alberta perspective

    International Nuclear Information System (INIS)

    Corbett, W.T.

    1996-01-01

    Selected aspects of priority issues in contractual obligations in the petroleum industry were discussed, focusing on the priority issues claimed by suppliers and operators with respect to Alberta properties. Discussions touched upon suppliers' lien rights in Alberta, operators' set-off rights, and on some of the priority issues involving operators' liens

  5. Definition of containment issues

    International Nuclear Information System (INIS)

    Walker, D.H.

    1982-01-01

    Public Law 96-567 Nuclear Safety Research, Development and Demonstration Act of 1980, directed the US Department of Energy (DOE) to provide an accelerated and coordinated program for developing practical generic improvements that would enhance the capability for safe, reliable and economical operation of Light Water Nuclear Reactor Power Stations. The DOE approach to defining such a program will consist of two phases, (1) definition of program requirements and (2) implementation of the program plan. This paper summarizes the results of the program definition phase for the containment integrity function. The definition phase effort was carried out by two groups of knowledgeable technical experts from the nuclear industry, one of which addressed containment integrity. Tabulated in the paper are the issues identified by the working groups and their associated priorities. Also tabulated are those high priority issues for which ongoing programs do not appear to provide sufficient information to resolve the issue. The results of this review show that existing programs to a great extent address existing issues in a manner such that the issues should be resolved by the programs

  6. Dinitrogen emissions as an overlooked component of the N balance of montane grasslands

    Science.gov (United States)

    Zistl-Schlingmann, M.; Feng, J.; Ralf, K.; Stephan, R.; Dannenmann, M.

    2017-12-01

    The aim of the SUSALPS project (www.susalps.de), formed by several Universities (Bayreuth, TUM) governmental research organizations (KIT, HMGU, Bavarian State Research Centre for Agriculture) and private industry (WWL) is to improve our knowledge on the effects of current and future climate and management on ecosystem functions performed by grasslands. SUSALPS experimental work quantifies impacts of climate and land management changes on plant and microbial diversity, nutrient use efficiencies, biomass production and quality, soil carbon and nitrogen storage and turnover, greenhouse gas emissions and nutrient leaching at several sites covering different elevations and thus, climatic conditions. Numerous studies have been conducted on the dynamics and annual budget of NOx, NH3 and especially N2O emissions, since it is a potent greenhouse gas. The emissions and its role in the N budget remain unclear for the inert and environmentally harmless N2, mainly due to the lack of reliable measurement techniques. The helium incubation technique developed by Butterbach-Bahl, Willibald & Papen (2002) allows us to conduct reliable N2 measurements with intact soil cores and thus field like conditions in the lab. In our studies, we investigated N2 and N2O fluxes and calculated the N2/(N2O+ N2) ratio from grassland ecosystems in southern Germany. A space-for-time approach was used to simulate climate change via the translocation of intact soil cores along an altitudinal gradient. Both climate change and fertilization events were investigated on their influence on gaseous N losses from the plant-soil system. Peak emissions, which occurred subsequently to fertilization events revealed a loss of almost 50% of the applied N via N-gas-emissions. The cumulative annual N-gas-emissions have additionally shown around six fold higher N losses via N2 compared to NH3, contributing about 80% of all gaseous N losses from the ecosystem. This led us to the conclusion, that N2 is an overlooked key

  7. Leadership Talent: A Study of the Potential of People in the Australian Rail Industry

    Directory of Open Access Journals (Sweden)

    Janene Piip

    2015-09-01

    Full Text Available This paper discusses the importance of leadership talent in the rail industry in Australia. Like many other countries around the world, rail is troubled by its ability to attract new talent as older leaders with specialized knowledge retire. This study sought to identify whether the sector is making the most of the talent already existing within, knowing the barriers faced in attracting new industry entrants, and questions what can be done to strengthen current approaches to developing leaders. In exploring the meaning of leadership talent, from a skills based perspective with three levels of leaders, blended methods using semi-structured interviews and a survey were utilized. The study is important because it focuses on the people aspects of the industry, a little researched area of rail that has major implications for how employees are engaged and retained. The findings identified a certain mindset, culture and approach about leadership talent in organizations that overlooked the heterogeneity of rail organization populations, precluding certain groups of people from becoming leaders. The project identified that leadership and other soft skills required in the rail industry are both under researched, and often undervalued, for the impact that they can have on performance and productivity of companies. There are key messages from this study for both organizations as well as inspiring rail industry leaders.

  8. 78 FR 69600 - Airworthiness Directives; Piaggio Aero Industries S.p.A Airplanes

    Science.gov (United States)

    2013-11-20

    ... p.m., Monday through Friday, except Federal holidays. For service information identified in this.... To address this potential unsafe condition, Piaggio Aero Industries (PAI) issued Service [[Page 69601... Service Information Piaggio Aero Industries S.p.A. has issued Mandatory Service Bulletin No.: 80-0381, Rev...

  9. Overlooked Transport Participants - Mentally Impaired but Still Mobile

    Science.gov (United States)

    Vlk, Tamara; Wanjek, Monika; Berkowitsch, Claudia; Hauger, Georg

    2017-10-01

    Providing an inclusive transport system is a global ambition. Whereas, mobility needs and mobility barriers of people suffering from a physical impairment have already been observed frequently, people suffering from mental impairments (due to e.g. anxiety disorders, obsessive-compulsive disorders, dementia or other degenerative diseases) are often overlooked. Numerous studies already suggest that the number of people with mental impairment will significantly increase due to the demographic change and is also shown by the prevalence of mental diseases. Whereby, not even the data collected do necessarily give the full picture of the actual situation. Thus, the importance of mobility needs and mobility problems of people with mental impairments will gain dramatically. Participating in the transport system is a basic need that furthermore requires the ability of adopting different roles (e.g. driver, pedestrian). Due to explanatory studies of the authors, it could be shown what kind of problems people with mental impairment are faced with while participating in the transport system or interacting in public space. Thus, these studies represent the first step that is needed to consider the specific needs of people with mental impairments in future planning. The identified problems of people who are suffering from mental impairment are various. Thereby it can be distinguished between problems triggered by structural (e.g. absence of emergency buttons, spacious stations), organisational (e.g. absence of security stuff, lacking information according time table of transit) or social conditions (e.g. crowed places or vehicles, stigmatisation). This paper presents an overall view of specific requirements of people with mental impairment and suggests possible solutions for planning and designing an inclusive transport system.

  10. Eco-innovation, international trade, WTO and climate: Key issues for an ecological industrial policy. Documentation of a workshop on March 12, 2008

    Energy Technology Data Exchange (ETDEWEB)

    Hoppe, Jutta; Kahlenborn, Walter [Adelphi Research, Berlin (Germany); Gather, Corinna (eds.) [Umweltbundesamt, Dessau (Germany)

    2009-01-15

    Within the meeting of the German Federal Environment Agency (Dessau, Federal Republic of Germany) and the German Federal Ministry for the Environment, Nature Conservation and Natural Safety (Berlin, Federal Republic of Germany) at 12th March, 2008, the following reports were held: (a) Trade Policy and Climate Change - An overview from the perspective of an ecological industrial policy (Jutta Hoppe et al.); (b) Kyoto, Post-Kyoto and the WTO (Malena Sell); (c) Climate change, trade and competitiveness (Aaron Cosby, John Drexhage); (d) Unilateral climate policy and implications for trade policy (Susanne Droege); (e) Trade in environmental goods and services relevant to climate-change mitigation: Opportunities and challenges for new industries in the European Union (Mahesh Sugathan); (f) The relevance of WTO activities and rules in the climate change debate (Ludivine Tamiotti); (g) Like-products, energy standards and labelling (Roland Ismer); (h) EC Trade policy and climate challenges: An overview of EC trade policy approaches to climate change (Ditte Juul-Joergensen); (i) Opportunities and constraints for an integrated European climate and trade policy (Ulrich Hoffmann); (j) Climate change, eco-innovation, and EU trade policy: a critical assessment (Daniel Mittler); (k) Resume: Key Issues for an Ecological Industrial policy (Jutta Hoppe, Walter Kahlenborn).

  11. Indonesia`s Palm Oil Industrialization: the Resistance of Tanjung Pusaka Villagers, Central Kalimantan Against Palm Oil Industry

    OpenAIRE

    Wulansari, Ica

    2017-01-01

    Indonesia`s Palm oil industry is the greatest export commodity in the world. Palm oil industry has been developed since Soeharto`s administration with World Bank`s initiative. Indonesia`s development pattern is modernization which is fully supported by global capitalist agent. Furthermore, the government of Indonesia has issued policies to support this industry and the ease of accessibilty for investor to build in Indonesia. Most of the policies focus on economic interest with lack of attenti...

  12. Introduction to Effluent Treatment and Industrial Methods

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 11. Techniques of WasteWater Treatment - Introduction to Effluent Treatment and Industrial Methods. Amol A Kulkarni Mugdha Deshpande A B Pandit. General Article Volume 5 Issue 11 November 2000 pp 56-68 ...

  13. Air quality and climate change co-benefits for the industrial sector in Durban, South Africa

    International Nuclear Information System (INIS)

    Thambiran, Tirusha; Diab, Roseanne D.

    2011-01-01

    Industries in Durban, South Africa, are a major source of air pollutant emissions and large users of fossil fuel based energy. Durban's energy strategy prioritises energy efficiency at industries as a key action, whilst industries are also the focus of the city's air quality management plan (AQMP). In this paper, measures that have been introduced in industries in Durban to effect air quality improvements and reduce energy consumption are examined in terms of their respective impacts on greenhouse gas (GHG) and air pollutant emissions. It was found that co-benefits for GHG mitigation were achieved when petroleum refineries switched from using heavy fuel oil to refinery gas and methane rich gas. Within other industries, co-benefits for air quality stemmed from reducing fossil fuel energy consumption and the improved efficiency of combustion systems. Air quality and energy policies in the city are being executed independently, without consideration of the trade-offs or synergies of the interventions being implemented. Recommendations are made for authorities and industries to consider the co-benefits for GHG mitigation in their AQMPs and where these are not possible to consider offsetting the increased GHG emissions through improved alignment with energy strategies. - Highlights: → Industrial energy use is a major source of atmospheric pollution in Durban. → Air quality and energy policies are executed independently. → Opportunities to harvest co-benefits and reduce trade-offs are overlooked. → Air quality management plans should be aligned with energy strategies.

  14. Air quality and climate change co-benefits for the industrial sector in Durban, South Africa

    Energy Technology Data Exchange (ETDEWEB)

    Thambiran, Tirusha, E-mail: tthambiran@csir.co.za [CSIR Natural Resources and the Environment, PO Box 17001, Congella 4013 (South Africa); School of Environmental Sciences, University of KwaZulu-Natal, Westville Campus, Private Bag X 54001, Durban 4000 (South Africa); Diab, Roseanne D. [School of Environmental Sciences, University of KwaZulu-Natal, Westville Campus, Private Bag X 54001, Durban 4000 (South Africa)

    2011-10-15

    Industries in Durban, South Africa, are a major source of air pollutant emissions and large users of fossil fuel based energy. Durban's energy strategy prioritises energy efficiency at industries as a key action, whilst industries are also the focus of the city's air quality management plan (AQMP). In this paper, measures that have been introduced in industries in Durban to effect air quality improvements and reduce energy consumption are examined in terms of their respective impacts on greenhouse gas (GHG) and air pollutant emissions. It was found that co-benefits for GHG mitigation were achieved when petroleum refineries switched from using heavy fuel oil to refinery gas and methane rich gas. Within other industries, co-benefits for air quality stemmed from reducing fossil fuel energy consumption and the improved efficiency of combustion systems. Air quality and energy policies in the city are being executed independently, without consideration of the trade-offs or synergies of the interventions being implemented. Recommendations are made for authorities and industries to consider the co-benefits for GHG mitigation in their AQMPs and where these are not possible to consider offsetting the increased GHG emissions through improved alignment with energy strategies. - Highlights: > Industrial energy use is a major source of atmospheric pollution in Durban. > Air quality and energy policies are executed independently. > Opportunities to harvest co-benefits and reduce trade-offs are overlooked. > Air quality management plans should be aligned with energy strategies.

  15. Cooling in the food industry. Special issue; Koelen in de voedingsindustrie. Themanummer

    Energy Technology Data Exchange (ETDEWEB)

    Anon,

    1998-03-01

    In five brief articles attention is paid to the cooling and freezing processes and equipment in the food industry. The following subjects are discussed: the Hazard Analysis and Critical Control Points system (HACCP) to reduce the hygienic risks in the food processing industry to a minimum, indoor climate control for the chicory-roots storage facilities, temperature control of the freezing process for baguettes, a total supermarket management system that meets the HACCP standard, and the use of a cooling simulation program to save energy in a slaughterhouse

  16. ENVIRONMENT DEGRADATION BASIS FOR INDUSTRIAL SYSTEMS RENGINEERING

    Directory of Open Access Journals (Sweden)

    Rade Milićević

    2007-06-01

    Full Text Available Presently, the most environmental pressure in Serbia comes from urban areas and associated industries,with collection, treatment and disposal all kinds of hazardous waste, non hazardous waste, and waste water being among the most challenging issues.There is an urgency to prevent further environmental degradation and to initiate new environmental and industrial management practices. Industrial systems reingeneering is one of possible solutions, from the authors stand point.

  17. The Virtual Orchestra: Technical and Creative Issues

    Science.gov (United States)

    BIANCHI, F. W.; CAMPBELL, R. H.

    2000-04-01

    The interactive multi-channel computer music system known as the Virtual Orchestra has been used several times in professional opera and theater as an alternative to a live pit orchestra. The technical issues associated with this emerging technology, and the logistical problems of implementing it are discussed. In addition, this paper describes the equally important issues regarding the creative impact this will have on the industry. In particular, this paper explores the role of the musician/technologist and suggests that many of the fundamental premises of opera production will change as the industry begins to retool. This would include the way opera is rehearsed and performed, how it is created and disseminated, and how it will adjust to changing demographics.

  18. Industrial applications of the Kalman filter

    DEFF Research Database (Denmark)

    Auger, François; Hilairet, Mickael; Guerrero, Josep M.

    2013-01-01

    The Kalman filter has received a huge interest from the industrial electronics community and has played a key role in many engineering fields since the 70s, ranging, without being exhaustive, trajectory estimation, state and parameter estimation for control or diagnosis, data merging, signal...... processing and so on. This paper provides a brief overview of the industrial applications and implementation issues of the Kalman filter in six topics of the industrial electronics community, highlighting some relevant reference papers and giving future research trends....

  19. The industrial and cultural heritage in landscape: Industrial Heritage, Landscape, Intelligent Territory

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Álvarez Areces

    2010-03-01

    Full Text Available Scenic values, industrial traces and artistic heritage are intertwined in a continuous space. IndustrialHeritage has acquired a meaning beyond the aesthetic or testimonial to become a spatial or temporalcore face of forgetfulness and loss of place memory. The “smartplaces”, where active communitieslive, are or were able to organize themselves to design and reach a consensus concerning a projectfor the future. There is no approach to conservation, preservation and enhancement, or new uses ofheritage without assuming a new ethic regarding the natural and urban environment, with new spacesfor reflection to deal environmental issues with coherence, new spaces for working, especially at theregional level, taking into account the singularity of the physical environment, the complexity of energyand natural heritage resources. In the mining heritage, the whole vision is essential for a moreeffective results in the conservation job. It should not be considered a marginal issue but a priority inurban and regional planning. In the "architectural complex" cultural identity is implied, as well asindustrial and cultural landscapes, concerning to mining history, sometimes it is a discontinuous process. It takes centuries with remains and vestiges, and grouping of urban and rural constructions that have an interest in the surroundings. It analyses several Spanish and international experiences,cases and archetypes from regions with significant vestiges of the industrial revolution which illustratethe limits and possibilities of regional development programs, cultural and industrial tourism,museums, civic and social facilities which incite an interrelationship between nature, culture andindustry.

  20. Fitness for duty in the nuclear power industry: A review of technical issues

    International Nuclear Information System (INIS)

    Barnes, V.; Fleming, I.; Grant, T.

    1988-09-01

    This report presents information gathered and analyzed in support of the United States Nuclear Regulatory Commission's (NRC's) efforts to develop a rule that will ensure that workers with unescorted access to protected areas in nuclear power plants are fit for duty. The primary potential fitness-for-duty concern addressed in the report is impairment caused by substance abuse, although other sources of impairment on the job are discussed. The report examines the prevalence of fitness-for-duty problems and discusses the use and effects of illicit drugs, prescription drugs, over-the-counter preparations and alcohol. The ways in which fitness-for-duty concerns are being addressed in both public- and private-sector industries are reviewed, and a description is provided of fitness-for-duty practices in six organizations that, like the nuclear industry, are regulated and whose operations can affect public health and safety. Methods of ensuring fitness for duty in the nuclear industry are examined in detail. The report also addresses methods of evaluating the effectiveness of fitness-for-duty programs in the nuclear power industry

  1. Issues affecting Northeast Asian minerals and energy markets

    International Nuclear Information System (INIS)

    Sheales, T.; Smith, V.

    1993-01-01

    Some of the broad issues likely to affect industry developments and trade in minerals and energy commodities in Northeast Asia in the 1990s are examined. Many of these issues will have a bearing on the development of mineral and energy resources of the Russian Far East region. 23 refs., 1 fig., 3 tabs

  2. Hospital CEOs' priorities and perceptions regarding industry issues and the Virginia Hospital Association's activities.

    Science.gov (United States)

    McDermott, D R; Gerardo, E F; Duguid, D A; Cooning, P J

    1991-01-01

    Based on a survey of Virginia hospital CEOs, it was revealed that four industry issues are causing a high degree of concern, namely Medicare/Medicaid reimbursement policies, personnel shortages, indigent care, and increased operating expenses. Each of these issues will be discussed regarding the VHA's activities to devise possible solutions. Regarding Medicare, the VHA has worked closely with the American Hospital Association in their federal advocacy efforts encouraging members to write, call, and visit their Congressional representatives to persuade them to pass legislation increasing the Medicare budget. Regarding Medicaid, which is administered by each state and in Virginia involves a 50/50 sharing of the funding between the federal and state governments, the VHA has challenged what it believes to be an illegal hospital reimbursement system through the federal judicial system. While the process is continuing, the VHA is encouraged by the U.S. Supreme Court's decision (July 1990) affirming hospitals' and all other health care providers' right, to pursue via the judicial process their allegation that a state is violating federal law by setting inadequate and inequitable Medicaid reimbursement rates to hospitals. In order to address the personnel shortages issue, the VHA has actively addressed recruitment and retention challenges by establishing a Health Manpower Resource Center and hiring a full-time director. This office targets high school students, second-career adults, and current health care professionals through communication and education programs. The area of indigent care represents one of the VHA's most notable achievements to date. This entails the recent Virginia legislation creating the Indigent Care Trust Fund. This fund's initial amount is some $15 million and represents an approximate 60/40 contribution ratio involving both the State of Virginia and hospitals in Virginia. A formula has been developed for each hospital in Virginia to assess how

  3. Papers of the PTAC air issues forum and poster session for the upstream oil and gas industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This forum focused on air issues from the perspective of the oil and gas industry. The impacts of the national pollutant release inventory and the new regional air quality network and the Albertan oil sands region were discussed as well as some of the varied impacts of environmental assessment procedures. The impact of sour gas emissions on southern Alberta was also examined. New methods and technologies for measuring emissions were presented, including: tools for the measurement of fugitive emissions; improved flare tip design; optical emissions detection technology; investigation of the sooting propensity of flares; and the measurement of fugitive emissions at gas processing facilities. Energy efficiency in practice was also discussed with a case study comparison of an emergency planning zone (EPZ) determination using existing and new models of the Energy Utilities Board (EUB). Seventeen papers were presented at this forum, three of which have been catalogued separately for inclusion in this database. tabs, figs.

  4. The American nuclear power industry. A handbook

    International Nuclear Information System (INIS)

    Pearman, W.A.; Starr, P.

    1984-01-01

    This book presents an overview of the history and current organization of the American nuclear power industry. Part I focuses on development of the industry, including the number, capacity, and type of plants in commercial operation as well as those under construction. Part II examines the safety, environmental, antitrust, and licensing issues involved in the use of nuclear power. Part III presents case studies of selected plants, such as Three Mile Island and Seabrook, to illustrate some of the issues discussed. The book also contains a listing of the Nuclear Regulatory Commission libraries and a subject index

  5. Indian mutual fund industry: Opportunities and challenges

    Directory of Open Access Journals (Sweden)

    Jayant R. Kale

    2012-12-01

    Full Text Available This article presents an overview of the mutual fund industry in India and the reasons for its poor penetration, which includes lack of objective research. It benchmarks the industry globally, and raises key issues regarding the ownership and performance of mutual funds, the sensitivity of fund flows to performance, and the importance of regulation to its growth, all of which have been largely under researched in India. It then captures the views of leading practitioners on these and other issues, including the challenges posed by poor financial literacy, the equity culture in the country, and the weakly supportive regulatory environment.

  6. [Urban industrial contaminated sites: a new issue in the field of environmental remediation in China].

    Science.gov (United States)

    Liao, Xiao-Yong; Chong, Zhong-Yi; Yan, Xiu-Lan; Zhao, Dan

    2011-03-01

    Contamination of urban industrial lands is a new environmental problem in China during the process of upgrade of industrial structure and adjustment of urban layout. It restricts the safe re-use of urban land resources, and threatens the health of surrounding inhabitants. In the paper, the market potential of contaminated-site remediation was known through analysis of spatial distribution of urban industrial sites in China. Remediation technologies in the Occident which were suitable for urban industrial contaminated sites were discussed and compared to evaluate their superiority and inferiority. And then, some advices of remediation technologies for urban industrial contaminated sites in China were proposed.

  7. Psychosocial Issues in Learning Disabilities.

    Science.gov (United States)

    Heisler, Alice B.

    1983-01-01

    Emotional development from infancy to adolescence is traced and the effects of psychosocial issues on a child with a learning disability are considered for five of E. Erikson's seven proposed stages (trust, autonomy, initiative, industry, adolescence). The need for intervention and parent counseling at each state is emphasized. (CL)

  8. Hearing conservation in the South African mining industry [Notes

    CSIR Research Space (South Africa)

    Edwards, A

    2010-09-01

    Full Text Available This paper deals with noise-induced hearing loss protection in the South African mining industry. I deals with several issues, including standards and regulations, medical issues and compensation...

  9. Continuous Improvement and its Barriers in Electrical and Electronic Industry

    Directory of Open Access Journals (Sweden)

    Ahmad Md Fauzi

    2017-01-01

    Full Text Available Continuous improvement is one of the core strategies for manufacturing excellent and it is considered vital in today’s business environment. Continuous improvement is an important factor in TQM implementation. However, manufacturers in Electrical and Electronic Industry is facing variety of challenges such as, time constraint, quality issue, headcount issue, human issue and competition in domestic as well as the global market. This paper presents total quality management practices in Electrical and Electronic (EE Industry. These manufacturers have to keep improving in key activities and processes to cope the challenges. Therefore, EE industry realize the importance of continuous improvement in helping the industries by setting clear goals and priorities for the area of improvement. The aims of this study are to determine the main factor in implementing continuous improvement practices, identify tools of continuous improvement that have been used and their obstacle in implementing continuous improvement practices. 200 questionnaires had been distributed to the employees in Electrical and Electronic Industry located at Bayan Lepas, Penang, Malaysia. A total of 41 questionnaires were answered which represented about 20.5% response rates. Survey result shows that teamwork and training and learning are respectively the importance factor and the most practices factor in Electrical and Electronic Industry. Most of the Electrical and Electronic Industry emphasis is on using Lean Manufacturing as the tool of continuous improvement practices. Besides that, Electrical and Electronic Industry faced the problems of lack of budget and lack of worker commitment.

  10. Guide to the economic regulation of the gas industry

    International Nuclear Information System (INIS)

    1999-12-01

    The guide provides: concise information on the institutional structure, legislation and licensing of the gas industry; a history of regulatory and commercial development in the industry; an examination of the current regulatory issues. (Author)

  11. Special Issue on Creativity at Work.

    Science.gov (United States)

    Donnelly, Brian; And Others

    1994-01-01

    Special issue includes "Creativity at the Workplace" (Donnelly); "Creativity Revisited" (Iandoli); interviews with 16 people who work in or teach industrial engineering, software, and graphic design; "On Creativity and Schooling" (Coppola, Iandoli); and "End Notes: What I Learned" (Iandoli). (SK)

  12. Organizing by covenant : the organization of transitional labor markets : paper IREC Conference 2004 'Governance issues in shifting industrial and employment relations' Utrecht, The Netherlands, August 26-28, 2004 : session potential and limits of national level socio-economic governance

    NARCIS (Netherlands)

    Korver, T.; Oeij, P.R.A.

    2004-01-01

    From 26-28 August 2004 in Utrecht the Industrial Relations in Europe Conference (IREC) was held on governance issues in shifting industrial and employment relations. As part of the session 'potential and limits of national level socio-economic governance' this paper about the organization of

  13. The South African wine industry: Insights survey 2013

    CSIR Research Space (South Africa)

    Blok, T

    2013-09-01

    Full Text Available PwC’s 2013 South African wine industry insights survey explores some of the issues facing local wine businesses, specifically those evident from the financial results of the 2012 harvest, human resource management practices in the industry and wine...

  14. Priority issues affecting operators' and suppliers' liens: the Saskatchewan perspective

    International Nuclear Information System (INIS)

    Milani, M.W.

    1996-01-01

    Priority issues in contractual obligations in the petroleum industry were discussed from the perspective of Saskatchewan. In Saskatchewan, the priority issues relative to builders' and suppliers' liens are similar to those of Alberta, but there are some subtle differences, which were addressed. Priority issues claimed by suppliers and operators with respect to Saskatchewan properties were given special attention

  15. Energy and environmental issues

    International Nuclear Information System (INIS)

    Skea, Jim

    1993-01-01

    This paper provides an overview of the current energy-environmental issues. Firstly, the environmental problems associated with energy production and use are briefly described. Secondly, the paper reviews the availability of technological solutions to environmental problems, focussing particularly on atmospheric emission control. Finally, it moves on to look at recent policy developments in some parts of the world. Since the paper is written from the perspective of an industrialized country, emerging policy issues in Europe, Japan, and North America receive the greatest attention, with a particular focus on Europe where greenhouse gases and the proposed carbon tax have received a particularly high priority. The paper concludes with a discussion of some of the issues arising from the 1992 UNCED (UN Conference on Environment and Development) and implications for the diffusion of cleaner technologies from North to South. (author). 36 refs

  16. 78 FR 36691 - Airworthiness Directives; Piaggio Aero Industries S.p.A Airplanes

    Science.gov (United States)

    2013-06-19

    ...., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service... condition, Piaggio Aero Industries (PAI) issued Service Bulletin (SB) 80-0345 to provide instructions for... in the AD docket. Relevant Service Information Piaggio Aero Industries S.p.A. has issued Mandatory...

  17. 78 FR 25363 - Airworthiness Directives; Diamond Aircraft Industries Airplanes

    Science.gov (United States)

    2013-05-01

    ... holidays. For service information identified in this AD, contact Diamond Aircraft Industries GmbH, N.A... Aircraft Industries GmbH has issued Mandatory Service Bulletin 40NG-018/1, dated November 20, 2012. The... Aircraft Industries GmbH Mandatory Service Bulletin 40NG-018/1, dated November 26, 2012. (2) If chafing...

  18. United States: refrigeration industry blows hot

    International Nuclear Information System (INIS)

    Crawford, J.

    1997-01-01

    In the framework of the Kyoto convention on global warming, the american refrigeration industries have undertaken several organizations and contacts with governments and agencies in order to explain the real issues concerning the effects of refrigerant utilization in refrigerating machines on the greenhouse effect, taking into consideration the commercial impact that a ban on certain refrigerants could have on the industry's business. They argue that HFC utilization in this industry is fundamentally non-emissive and that important improvements have been realized concerning tightness and energy consumption

  19. A Theoretical Assessment on Optimal Asset Allocations in Insurance Industry

    Directory of Open Access Journals (Sweden)

    Bilel Jarraya

    2013-10-01

    Full Text Available In recent years the financial markets known a rapid development and become more and more complex. So, many regulatory requirements, focused on banks as well as insurance sector, have been developed. These regulatory are concentrated essentially on business risk control and required capital to cover risks. These requirements have influenced the asset allocation issue in insurance industry. These requirements have influenced the asset allocation issue in insurance industry. This section is interested by this issue. In first time it highlights some research works in this issue. Then we will investigate the relation between Solvency and optimal asset allocation. Finally we will explore the principal used methods in modeling asset and in choosing the optimal portfolio composition.

  20. Human factors considerations for expert systems in the nuclear industry

    International Nuclear Information System (INIS)

    Nelson, W.R.

    1988-01-01

    This paper discusses the general human factors issues relative to the development and implementation of expert systems for the nuclear industry. It summarizes the relevant research that addresses these issues, and identifies those areas that need the most effort for success. Since much of the prominent work for the application of expert systems has focused on computerized aids for decision making in emergencies, this paper draws from this area for its examples. This area tends to highlight the issues because of the safety-critical nature of the application. The same issues, however, are relevant to other applications of expert systems in the nuclear industry as well, even though the consequences of failure may not be as dramatic

  1. Security of radioactive sources in industrial radiography

    International Nuclear Information System (INIS)

    Popp, Andrew; Murray, Allan

    2010-01-01

    This paper describes the need and new requirements to ensure the security of radioactive sources used in the practice of industrial radiography. We describe the discussions and issues arising during the september 2010 regional workshop held in Sydney on the application of security measures to industrial radiography practices. The workshop provided the perspectives of both radiation regulators and industry practitioners, including those from the Philippines. We describe the outputs of the workshop, and how they were developed, and make suggestions for further consideration and applications of security measures in the practice of industrial radiography. (author)

  2. Ready: how to keep your customers coming back.

    Science.gov (United States)

    Eliscu, A T

    2000-01-01

    Customer service is a major, but often overlooked, issue in health care today. While other industries and organizations recognize how good customer relations can affect long-term success, many health care providers have yet to learn this valuable lesson. The Ritz-Carlton, which won the prestigious Baldridge Award for service, has a well-earned reputation for excellent customer service. Like health care providers, this hotel industry icon hires hourly workers, puts them in uniform and has them work in teams. Unlike health care, however, The Ritz-Carlton seems to be able to generate a much higher level of customer satisfaction. How? This chapter illustrates the techniques the hotel chain uses to accomplish its goal and how these important tools can apply to the health care industry.

  3. Dynamic operational risk management at industrial irradiation plants

    International Nuclear Information System (INIS)

    Wieland, Patricia; Lustosa, Leonardo J.

    2010-01-01

    Although feasibility studies indicate that industrial irradiation can be sound business, some initiatives fail in few years. In Brazil, the operation of some industrial irradiation plants has been discontinued in spite of the growing export market for tropical fruits like mangoes and papayas, of which Brazil is one of the major producers. This paper discusses the overall aspects of the food irradiation in Brazil, singles out dynamic operation risk management as an important need and provides suggestions for further developments. This research work involves literature review as well as interviews with irradiation industry stake holders in order to identify the ORs and to assess the situation in a logical and integrated way. The results show that public acceptance is not a major issue for the food preservation industry in Brazil. On the contrary, evidences show that there is public support, provided that information on the subject is disseminated among consumers. Need for improvements have been detected in the areas of industrial operational risk management, external relations for export, and regulatory issues, among others to support decision making in establishing and developing industrial food irradiation capabilities to serve Brazilian tropical fruit exports. (author)

  4. Power-Electronics Issues of Modern Electric Railway Systems

    Directory of Open Access Journals (Sweden)

    STEIMEL, A.

    2010-05-01

    Full Text Available After de-regulation of the former state-owned railways and severe restructuring of the railway industry in the last 15 years, more innovative vehicle concepts saw the light of the day. Power electronics, already formerly being a pacemaker for progress of traction vehicles, brought forth an utmost standardization of the main drive by means of the IGBT-converter-fed induction motor drive. This is independent of the railway supply voltage system or of a diesel prime mover, for locomotives, high-speed and mass-transit trains as well as for tramways. Vehicles able to operate on all four European railway voltage systems have become feasible and are used now widely. New trends as Permanent-Magnet Synchronous Motors or Medium-Frequency Transformers are discussed, and a short overlook over actual field-oriented high-performance motor control systems - including a speed-sensorless variant - is given. Power electronics dominates the field of conversion of the 16.7-Hz railway supply power, typical for Central Europe, from the 50-Hz three-phase utility grid.

  5. Special issue dedicated to Professor Johann M. Schepers

    Directory of Open Access Journals (Sweden)

    Gideon P De Bruin

    2006-10-01

    Full Text Available It is a great pleasure for me to have been associated with this special issue of the SA Journal of Industrial Psychology dedicated to Professor Johann M. Schepers. The purpose of the special issue is to honour Professor Schepers for his contributions to the development of Psychology and Industrial Psychology as empirical fields of study in South Africa. The contributors have worked with Professor Schepers as students or colleagues and share his academic interests. The articles reflect his areas of interest and employ analytic techniques taught and championed by him. We are grateful to Professor Schepers for his cooperation throughout this project. Thanks are due to all the contributors and referees.

  6. Code of practice in industrial radiography

    International Nuclear Information System (INIS)

    Karma, S. E. M.

    2010-12-01

    The aim of this research is to developing a draft for a new radiation protection code of practice in industrial radiography without ignoring that one issued in 1998 and meet the current international recommendation. Another aim of this study was to assess the current situation of radiation protection in some of the industrial radiography department in Sudan. To achieve the aims of this study, a draft of a code of practice has been developed which is based on international and local relevant recommendations. The developed code includes the following main issues: regulatory responsibilities, radiation protection program and design of radiation installation. The practical part of this study includes scientific visits to two of industrial radiography departments in Sudan so as to assess the degree of compliance of that department with what state in the developed code. The result of each scientific visits revealed that most of the department do not have an effective radiation protection program and that could lead to exposure workers and public to unnecessary dose. Some recommendations were stated that, if implemented could improve the status of radiation protection in industrial radiography department. (Author)

  7. Usefulness of analytical CEA doubling time and half-life time for overlooked synchronous metastases in colorectal carcinoma.

    Science.gov (United States)

    Ito, Katsuki; Hibi, Kenji; Ando, Hideyuki; Hidemura, Kazuhiko; Yamazaki, Taiji; Akiyama, Seiji; Nakao, Akimasa

    2002-02-01

    Measurement of carcinoembryonic antigen (CEA) has been widely applied to detect recurrence, especially of colorectal carcinoma. The validity however, is still controversial. We investigated serial changes in CEA values to calculate whether the CEA doubling time and half-life time could predict metastatic progression or prognosis in colorectal carcinoma. Pre- and post-operative serial serum CEA contents were determined in 22 cases of colorectal cancer with or without metastasis. CEA values were determined by enzyme immunoassay (EIA). Patients were assigned depending upon survival time (within vs. more than 18 months after primary resection) for assessment of CEA doubling time. From the gradient of the semi-logarithmic CEA graph, the preoperative doubling time was calculated and the postoperative half-life time was estimated according to the diagnosis of metastases within 2 years after primary resection [metastasis (+) or (-)]. In spite of the effect of curative re-operation of metastatic lesions or of postoperative adjuvant chemotherapy, the CEA doubling time of the groups showed a relation with prognosis (p = 0.045, Student's t-test) when the patients were divided into >18 and time. The CEA half-life time of the groups without overlooked metastases was statistically longer than those with (mean +/- SD 8.01 +/- 2.07 and 4.33 +/- 1.11, respectively, p Clearance (k) showed a significant difference between the groups (p time appeared to be a less independent prognostic factor, whereas prolongation of the CEA half-life time might potentially suggest the existence of overlooked synchronous metastases from colorectal carcinoma.

  8. The 'overlooked trio' of hypothetical terrorist nuclear weapons - reactor grade plutonium, neptunium-237 and tritium

    International Nuclear Information System (INIS)

    Sholly, S.

    2002-01-01

    Full text: Considerations revolving around physical protection of nuclear material are quite commonly and naturally focused on protecting weapons-grade plutonium (WGPu) and highly enriched uranium (HEU) from theft and diversion. These two materials are the center of attention because of their well-known (and demonstrated) potential for use in first-generation nuclear explosive devices of which potential terrorists are widely thought to be capable. They are also the center of attention because of retirements of these materials from military use as the Russian Federation and the United States reduce the number of nuclear weapons in their arsenals. Three other materials - an 'overlooked trio' - must also be borne in mind within this context: (1) reactor-grade plutonium (RGPu); (2) neptunium-237 (Np-237); and (3) tritium (H-3). Although there are still some authorities who either contend that RGPu cannot be used in a nuclear explosive or that there are (for a terrorist) insurmountable difficulties in doing so, the knowledgeable scientific and technical community, recognizes the potential utility of RGPu for hypothetical terrorist nuclear devices. A much smaller community of experts recognizes the usefulness of Np-237 for nuclear devices, but Np-237 is as straight-forwardly and easily usable as HEU and similarly abundant (but not often in separated form). Tritium can be used (with a modest increase in design sophistication) in a conventional first-generation nuclear device with any of the weapons-usable materials (WGPu, HEU, RGPu or Np-237) to increase the yield and/or increase the reliability of a non-fizzle yield. Given the presence of RGPu and Np-237 in abundant quantities in spent commercial reactor fuel, widely available knowledge of how to separate these materials, and a world-wide total of more than 400 nuclear power plants, spent reactor fuel also requires stringent controls. This is especially true of old spent fuel which has far less radiation dose

  9. Venturing into cyberspace - some legal issues

    International Nuclear Information System (INIS)

    Gahtan, A.M.

    1999-01-01

    Issues regarding the use of the world-wide web by oil and gas companies were discussed. A series of overhead viewgraphs were used to illustrate general advertising and promotion issues including liability for links and frames, web site development agreements, and web site hosting agreements. The meaning of industry or product-specific advertising, trade mark infringement implications, the significance of foreign jurisdictions in operating a website, other significant website concepts, and the general principles of website development and attendant legal implications are explored

  10. Ethical issues surrounding e-gambling data collection

    OpenAIRE

    Griffiths, MD; Whitty, M

    2011-01-01

    Online gambling data collection is becoming a focus of interest for various stakeholders in the online gaming industry, since it is relevant for advertising, attracting new players, exploring new markets and trying out new products. Mark Griffiths, of Nottingham Trent University, and Monica Whitty, of the University of Leicester, give an overview of some of the ethical issues raised by data collection in the gaming industry and research undertaken in the gambling studies field.

  11. Socio-economic impacts between the nuclear industry and Aboriginal people

    International Nuclear Information System (INIS)

    Malcolm, D.G.

    1996-01-01

    The paper explores several aspects of the socio-economic impact of the nuclear industry on Aboriginal people in northern Canada. The issues discussed include decision-making by consensus, community-based development, the role of Traditional Ecological Knowledge and Management Systems (TEKMS), relationships with land and nature, and social and health issues. The issues are discussed with respect to the divergence between Aboriginal and non-Aboriginal cultures, which affect the timelines for project viability as well as the continued harmony between industry and community. It is concluded that economic gains can be achieved through continuous community dialogue from the moment of project inception. (author)

  12. Resolution of Generic Safety Issue 29: Bolting degradation or failure in nuclear power plants

    International Nuclear Information System (INIS)

    Johnson, R.E.

    1990-06-01

    This report describes the US Nuclear Regulatory Commission's (NRC's) Generic Safety Issue 29, ''Bolting Degradation or Failure in Nuclear Power Plants,'' including the bases for establishing the issue and its historical highlights. The report also describes the activities of the Atomic Industrial Forum (AIF) relevant to this issue, including its cooperation with the Materials Properties Council (MPC) to organize a task group to help resolve the issue. The Electric Power Research Institute, supported by the AIF/MPC task group, prepared and issued a two-volume document that provides, in part, the technical basis for resolving Generic Safety Issue 29. This report presents the NRC's review and evaluation of the two-volume document and NRC's conclusion that this document, in conjunction with other information from both industry and NRC, provides the bases for resolving this issue

  13. United States electric industry : restructuring in review

    International Nuclear Information System (INIS)

    Slocum Hollis, S.

    2004-01-01

    This paper provides a detailed review of the United States electric power industry. The aim of the review was to clarify and better define current industry procedures and practices in light of significant and recent restructuring. In addition, recent bankruptcies and the power blackout in 2003 have raised concerns over industry practices. Issues concerning Independent System Operators (ISO) and regional transmission organizations were evaluated, with reference to an evolution and implementation of Regional Transmission Organization (RTO) policy, including a cost-benefit analysis. A background of RTO formations was provided with reference to consolidation, selection process and transfer of assets. Standard market design, network access and pricing issues were reviewed, as well as market and reliability concerns. Issues concerning affiliate treatment, shortages and the effect of sale of securities were presented. Various approaches to congestion management were examined, with examples from California and New England. Market monitoring issues, investigations and hearings were also examined, with examples and orders, including details of refunds. Measures to improve reliability were reviewed, including: management systems, benefit margins, requirements, assurance agreements and reserve markets. Issues concerning information access were presented, including: Open Access Same-time Information System (OASIS) requirements; tagging; standard business practices and protocols; and quarterly report practices and protocols. Interconnection policies were reviewed with reference to applicability, service options and pricing. The issue of variations was examined, with case examples concerning cost allocation, contract rights and treatment of specific costs. Jurisdiction issues concerning corporate realignments and power exchanges were presented, as well as specific services and state-federal relations. Issues concerning mergers and merger policy were also discussed, with reference

  14. Energy and Production Planning for Process Industry Supply Chains

    OpenAIRE

    Waldemarsson, Martin

    2012-01-01

    This thesis addresses industrial energy issues from a production economic perspective. During the past decade, the energy issue has become more important, partly due to rising energy prices in general, but also from a political pressure on environmental awareness concerning the problems with climate change. As a large user of energy the industry sector is most likely responsible for a lot of these problems. Things need to change and are most likely to do so considering current and assumed fut...

  15. The UK oil industry in 1992-93

    International Nuclear Information System (INIS)

    Collins, John

    1993-01-01

    A review is presented of the fortunes of the United Kingdom oil industry for the year 1992-1993. Recent achievements in dealing with competition and growing costs are noted. Relationships between the oil industry and policy makers, both at national and European Community level will need to be based on realistic understanding of the industry and the complex issues it faces. Although the offshore oil and gas industry has enjoyed considerable success since the mid-1960s, recent structural change and market liberalization means that it now faces challenges which require even closer cooperation between government and the industry itself to be achieved. (UK)

  16. Towards a comprehensive framework to govern the main sustainability issues of inland industrial complexes

    CSIR Research Space (South Africa)

    Mvuma, GG

    2010-04-01

    Full Text Available for inland industrial complexes in South Africa. The social and economic benefits warrant the government support of such industrial complexes, but the negative consequences, for present and future generations, need to be considered in a comprehensive manner...

  17. Industry activities to improve valve performance

    Energy Technology Data Exchange (ETDEWEB)

    Callaway, C.

    1996-12-01

    Motor-operated valve issues refuse to go away. For over a decade the industry and the NRC have been focusing extraordinary resources on assuring these special components operate when called upon. Now that industry has fixed the design deficiencies, it is focusing on assuring that they perform their safety function within the current licensing basis for the remainder of plant life. NEI supported the efforts by ASME to develop OMN-1 and was encouraged that the industry and the NRC worked together to develop risk and performance based approaches to maintain MOV performance.

  18. Human-machine interactions: The human element of expert systems for the nuclear industry

    International Nuclear Information System (INIS)

    Nelson, W.R.

    1989-01-01

    This paper will begin with a brief history of the development of expert systems in the nuclear industry. This discussion will serve to provide the reader with an understanding of how the field of artificial intelligence (AI) applications in the nuclear industry has developed. Next, this paper will discuss the general human factors issues relative to the development and implementation of expert systems for the nuclear industry. It will summarize the relevant research that addresses these issues and identify those areas that need the most effort for success. Since much of the prominent work for the application of expert systems has focused on computerized aids for decisionmaking in emergencies, this paper will draw from this area for its examples. This area tends to highlight the issues because of the safety-critical nature of the application. The same issues, however, are relevant to other applications of expert systems in the nuclear industry as well, even though the consequences of failure may not be as dramatic. (orig./GL)

  19. NASA Symposium on Productivity and Quality: Strategies for Improving Operations in Government and Industry

    Science.gov (United States)

    1984-01-01

    The purpose of the Symposium is to increase the awareness of productivity and quality issues in the United States, and to foster national initiatives through government and industry executive leadership. The Symposium will provide a forum for discussion of white-collar productivity issues by experienced executives from successful organizations and an opportunity to share information learned through Productivity initiatives in govemment, industry and academic organizations. It will focus on white-collar organizational issues that are common to large companies and technology oriented organizations. The Symposium program will include strategies for improving operations in government and industry and will be responsive to the management issues viewed necessary to increase our nation's productivity growth rate.

  20. Construction industry in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Moavenzadeh, F

    1978-01-01

    This paper provides a review of the construction capability available in the developing countries to meet the demand for shelter. It discusses the role of construction in the process of development and its importance to economic growth. It considers the issue facing the growth of a viable indigenous construction industry in the developing world within the context of the activities involved in the creation of constructed facilities--planning, design, contruction and maintenance; it also examines the environment within which the industry has developed. For each construction activity the paper reviews available capabilities, the various resources needed for the development of an indigenous industry, and some possible means of accommodating these needs.

  1. Nuclear energy technology innovation and restructuring electric power industry for sustainable development in Korea in 21st century - issues and strategies

    International Nuclear Information System (INIS)

    Lee, B.W.; Chae, K.N.

    2001-01-01

    After TMI and Chernobyl accidents, concerns on nuclear safety and radiation health risk from radioactive wastes become the target issues for anti-nuclear. Nevertheless, nuclear power is a substantial contributor to the world electricity production, supplying more than 16 % of global electricity. The objectives of Korean nuclear energy technology innovation are to improve safety, economic competitiveness, energy security and the effectiveness of radioactive waste management in harmony with environment. Meeting such objectives, public concerns on safety and health risks would be cleared. Innovative nuclear energy system will certainly enhance socio-political acceptance and enable wider application of nuclear energy for sustainable development in Korea in the 21st Century. In parallel to such technology innovations, the effective first phase restructuring of electric power industry is in progress to enhance management efficiency and customer services. The power generation division of the former state-run utility, Korea Electric Power Corporation (KEPCO) was separated and divided into six companies - five thermal power and one hydro and nuclear power generation companies - in last April. After the reorganization of KEPCO and the break-up of monopoly, the new electric power industry will be driven by market force. (author)

  2. Industrial Activity at CERN

    CERN Document Server

    Kowalik, G

    2000-01-01

    The decrease in the number of CERN staff creates the need for optimization of the non-core, infrastructure-related activities. An industrial, service-orientated approach has long been considered as an appropriate way to cope with the problem of diminishing resources. This paper presents industrial and service activity issues at CERN based on the experience of the exploitation of the power network. The most important problems linked to the application of the industrial approach to the exploitation of equipment in the CERN research environment are covered. These include the interface between accelerators and electrical exploitation services, external and internal regulations, sharing of responsibility between CERN staff and external contractors, continuous modification of clients' requirements, the balance between the cost of accelerator downtime versus the cost of infrastructure upgrade. A benchmarking through a comparison with a big industrial manufacturer is followed by recommendations for possible improveme...

  3. Used oil issues and opportunities

    International Nuclear Information System (INIS)

    Teintze, L.M.

    1992-01-01

    The authors have heard the distressing comparisons in the press: More used oil is illegally disposed of or dumped in the United States each year than the sum total of more than 35 Valdez crude spills in Alaska. 1 gallon of used oil alone has the potential to contaminate 1 million gallons of drinking water, if all used oil improperly disposed of by Do-it-Yourselfers were recycled, it could produce enough energy to power 360,000 homes each year or could provide 96 million quarts of high quality motor oil. This paper presents an overview of the used oil situation faced by the oil industry today. major issues such as the size of the problem, the current disposition of used oil, the role of the Do-it-Yourselfers, federal and state legislation, and used oil activities in foreign countries will be addressed. Likewise, the opportunities that the industry has to voluntarily and favorably respond to the used oil issues, in order to control and improve the impact on the environment, will be reviewed

  4. Reliability issues : a Canadian perspective

    International Nuclear Information System (INIS)

    Konow, H.

    2004-01-01

    A Canadian perspective of power reliability issues was presented. Reliability depends on adequacy of supply and a framework for standards. The challenges facing the electric power industry include new demand, plant replacement and exports. It is expected that demand will by 670 TWh by 2020, with 205 TWh coming from new plants. Canada will require an investment of $150 billion to meet this demand and the need is comparable in the United States. As trade grows, the challenge becomes a continental issue and investment in the bi-national transmission grid will be essential. The 5 point plan of the Canadian Electricity Association is to: (1) establish an investment climate to ensure future electricity supply, (2) move government and industry towards smart and effective regulation, (3) work to ensure a sustainable future for the next generation, (4) foster innovation and accelerate skills development, and (5) build on the strengths of an integrated North American system to maximize opportunity for Canadians. The CEA's 7 measures that enhance North American reliability were listed with emphasis on its support for a self-governing international organization for developing and enforcing mandatory reliability standards. CEA also supports the creation of a binational Electric Reliability Organization (ERO) to identify and solve reliability issues in the context of a bi-national grid. tabs., figs

  5. Potential cooperative measures on nuclear issues in Asia

    International Nuclear Information System (INIS)

    Olsen, J.

    1997-01-01

    Cooperation on nuclear issues is receiving increased attention in Asia. In Northeast Asia, where the nuclear industry is well-developed, cooperation in the back end of the nuclear fuel cycle could help deal with issues such as disposition of spent fuel and long term storage options. In Southeast Asia, where countries are just beginning to introduce nuclear energy, cooperation would be useful in developing standards for the nuclear industry. Throughout Asia, nuclear research and power activities can raise concerns about safety, environmental pollution and proliferation. The sharing of relevant information, i.e. cooperative monitoring, will be essential to addressing these issues. In fact, a number of regional interactions on nuclear issues are already occurring. These range from training exchanges sponsored by the more advanced states to participation in environmental monitoring of the East Sea (Sea of Japan). Several states are considering sharing information from their nuclear facilities; some exchanges of radiation data are already in place. The KEDO reactor project will involve close working relations between the nuclear experts of South Korea, North Korea, Japan, and the US. Areas for further regional cooperation are discussed

  6. Historic town centre management - The real estate industry

    Directory of Open Access Journals (Sweden)

    Ciubotaru Mihai

    2018-01-01

    Full Text Available In modern times, many of the socio-economic aspects of our lives (beside the classical understanding of the term industry “evolved(?” into industries: music, arts in general, sports, education, health....have become professionally managed industries. Historical town centres provide goods and services and, in this context, can be regarded as industries, as a whole. All the elements of an industry can be identified in these complex “places”: provision of goods and services, human resources issues, technology, marketing, regulatory and legal aspects, management...all of which pointing towards an approach that needs to be looked at as such. The most important industry in hist oric town centres is the real estate industry.

  7. Strategic Marketing Problems in the Uganda Maize Seed Industry

    OpenAIRE

    Larson, Donald W.; Mbowa, Swaibu

    2004-01-01

    Strategic marketing issues and challenges face maize seed marketing firms as farmers increasingly adopt hybrid varieties in a modernizing third world country such as Uganda. The maize seed industry of Uganda has changed dramatically from a government owned, controlled, and operated industry to a competitive market oriented industry with substantial private firm investment and participation. The new maize seed industry is young, dynamic, growing and very competitive. The small maize seed marke...

  8. From legitimate consumers to public relations pawns: the tobacco industry and young Australians.

    Science.gov (United States)

    Carter, S M

    2003-12-01

    To document the Australian tobacco industry's activities regarding youth smoking to support tobacco control. 492 industry documents from primary and secondary websites were abstracted and analysed. Australian legislation and rhetoric on youth and tobacco has changed dramatically over the last 50 years, from an unproblematic association of teenagers and smoking in the 1960s, through the industry's aggressive attacks and denials in the 1980s, to the 1990s, when industry became newly compliant with "societal expectations" and youth became a dominant bargaining issue in the industry's public relations strategy. The industry's current policy is to simultaneously blame others for underage smoking, frame the industry as socially responsible via voluntary marketing codes, youth access programmes, and school education, and market actively to young adults. The arbitrary distinction between 17 and 18 year olds is, particularly in Australia's dark market, a liability for tobacco control and an opportunity for the industry, which is attempting to claim the high moral ground traditionally occupied by tobacco control on the youth issue. The current review of Australia's Tobacco Advertising Prohibition Act of 1992 should prohibit all forms of industry communication targeting young people, including retail access and schools programmes and below-the-line marketing. Tobacco control advocacy should highlight the industry's attempts to use the youth issue in its own favour while laying the blame elsewhere.

  9. FEASIBILITY ANALYSIS ON INDUSTRIAL SYMBIOSIS BETWEEN CEMENT INDUSTRY AND TEA INDUSTRY

    Directory of Open Access Journals (Sweden)

    Shailendra Kumar Yadav

    2015-08-01

    Full Text Available The project aims at analyzing the feasibility of utilizing cement kiln dust (CKD in treating wastewater from tea industry with the concept of industrial symbiosis. CKD is the dust collected at the air pollution control device(s associated with a kiln system from cement industry. A very less percent of CKD is recycled and the rest is land filled /stockpiled; disrupts groundwater through leaching of minerals. Cement Kiln Dust (CKD, rich in CaO, SiO2, behaves as a neutralizing as well as stabilizing agent for tea effluent treatment. The ability of CKD to reduce the BOD, COD, TSS, and phosphates in tea effluent was analyzed and the optimum dosage is determined. The effect of different dosages of Cement Kiln Dust ranging from (1-3 gm/l has been discussed on the bench scale tests. The results show that, for different CKD concentrations, high removal efficiencies of 94.4 and 99.0, 58.9 for BOD, TSS, phosphates and a lower efficiency for COD with 9.09 are achieved for 2.5gm/l. The persistent presence of color providing proteins theaflavins (TF and the arubigins (TR from the leftover tea leaves in the effluent imparts the low removal efficiencies of COD. However, the COD value is within the dischargeable limits (CPCB standards. Moreover, a considerable removal efficiency and high SVI of 0.181 makes CKD a feasible coagulant in treating tea effluent with optimum dosage of 2.5g/l. The objective of developing industrial symbiosis network was thus achieved using the CKD to treat wastewater from tea industries.   International Journal of EnvironmentVolume-4, Issue-3, June-August 2015Page: 20-34

  10. An improved hybrid multi-criteria/multidimensional model for strategic industrial location selection: Casablanca industrial zones as a case study.

    Science.gov (United States)

    Boutkhoum, Omar; Hanine, Mohamed; Agouti, Tarik; Tikniouine, Abdessadek

    2015-01-01

    In this paper, we examine the issue of strategic industrial location selection in uncertain decision making environments for implanting new industrial corporation. In fact, the industrial location issue is typically considered as a crucial factor in business research field which is related to many calculations about natural resources, distributors, suppliers, customers, and most other things. Based on the integration of environmental, economic and social decisive elements of sustainable development, this paper presents a hybrid decision making model combining fuzzy multi-criteria analysis with analytical capabilities that OLAP systems can provide for successful and optimal industrial location selection. The proposed model mainly consists in three stages. In the first stage, a decision-making committee has been established to identify the evaluation criteria impacting the location selection process. In the second stage, we develop fuzzy AHP software based on the extent analysis method to assign the importance weights to the selected criteria, which allows us to model the linguistic vagueness, ambiguity, and incomplete knowledge. In the last stage, OLAP analysis integrated with multi-criteria analysis employs these weighted criteria as inputs to evaluate, rank and select the strategic industrial location for implanting new business corporation in the region of Casablanca, Morocco. Finally, a sensitivity analysis is performed to evaluate the impact of criteria weights and the preferences given by decision makers on the final rankings of strategic industrial locations.

  11. Industrial waste and pollution in Mongolia

    Energy Technology Data Exchange (ETDEWEB)

    Dolgormaa, L. [Minstry of Nature and Environment, Ulaanbaatar (Mongolia)

    1996-12-31

    This paper very briefly outlines hazardous waste management issues, including regulations, in Mongolia. Air, water, and soil pollutants are identified and placed in context with climatic, social, and economic circumstances. The primary need identified is technology for the collection and disposal of solid wastes. Municipal waste problems include rapid urbanization and lack of sanitary landfills. Industrial wastes of concern are identified from the mining and leather industries. 4 refs., 2 tabs.

  12. 25 Years since the First Issue of the Journal „Robotica & Management”

    Directory of Open Access Journals (Sweden)

    Corneliu Rădulescu

    2015-06-01

    Full Text Available The journal "Robotica & Management" was intended to be issued twice a year, stating with 1990. The first issue of the journal “Robotica & Management” in July 1990 (Fig. 4, was edited by the Robotics Association of Romania. At the present time, the journal is edited by: − Robotics Society of Romania, − ''Eftimie Murgu'' University of Reşiţa, − County Council Caras-Severin, − Politehnica University Timişoara. Through publishing of scientific papers, the journal aims to promote Robotics and Management, both in theoretical research and industrial or economical applications. The contributions published in the journal approach issues regarding: • the mechanical system of industrial and service robots; • actuation and control of robots; • application of robots in industry and service; •implementation of robotic systems in manufacturing and servicing; • study of flexible manufacturing systems; • modeling and simulation; • management.

  13. Product Differentiation and Industrial Structure.

    OpenAIRE

    Shaked, Avner; Sutton, John

    1987-01-01

    Some recent literature on "vertical product differentiation" has d eveloped the idea that if the nature of technology and tastes in some industry take a certain form, then the industry must necessarily be "concentrated" and must remain so, no matter how large the economy becomes. The present paper develops this idea further and looks at so me of its implications. This approach offers a simple unified framewo rk within which to reexplore many issues that arise in considering th e relationship ...

  14. Proceedings of the 2008 air issues forum

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This forum focused on air related issues of concern to the oil and gas industry, regulators, researchers and the public. It included technological advances, new research projects, case studies, demonstrations, and updates to environmental regulations. Both the provincial and federal governments have recently announced new and significant reduction targets for air emissions that will have impacts on upstream oil and gas (UOG) companies. This forum reviewed what has been proposed and why and outlined the potential implications for producers. New regulatory processes and their requirements were also discussed along with ongoing industry sponsored air related research and emerging air related issues such as soot formation during flaring, sour gas flare combustion simulation modelling and fugitive emissions reduction. Ten presentations were featured at this forum, of which 3 have been catalogued separately for inclusion in this database. tabs. figs.

  15. Proceedings of the 2008 air issues forum

    International Nuclear Information System (INIS)

    2008-01-01

    This forum focused on air related issues of concern to the oil and gas industry, regulators, researchers and the public. It included technological advances, new research projects, case studies, demonstrations, and updates to environmental regulations. Both the provincial and federal governments have recently announced new and significant reduction targets for air emissions that will have impacts on upstream oil and gas (UOG) companies. This forum reviewed what has been proposed and why and outlined the potential implications for producers. New regulatory processes and their requirements were also discussed along with ongoing industry sponsored air related research and emerging air related issues such as soot formation during flaring, sour gas flare combustion simulation modelling and fugitive emissions reduction. Ten presentations were featured at this forum, of which 3 have been catalogued separately for inclusion in this database. tabs. figs

  16. Using the Communication Methods, Tools and Support During Management of Project Communication in Industrial Manufacturing Enterprises

    Science.gov (United States)

    Samáková, Jana; Babčanová, Dagmar; Hrablikchovanová, Henrieta; Mesárošová, Jana; Šujanová, Jana

    2017-09-01

    Effective communication is the most significant ability for project manager and successful project. However, during the management of projects communication, it is very often forgotten, often overlooked or taken for granted. In the management of projects, it is principally necessary to deal with communication during all project lifecycle. Within the project communication, it is very important to define the main methods, tools, support of communication and frequency of communication; these belong to the most important elements of the communication channel which is very often forgotten. Therefore, the main aim of the paper is to analyse the utilisation of the communication channel: communication methods, communication tools, communication frequency and to support project communication in industrial manufacturing enterprises in Slovakia. Based on the research, we can conclude that communication channel is not adequately elaborated in international methodologies and standards of project management as well as in industrial manufacturing enterprises. These facts are very negative, conclusion and it is therefore necessary to deal with the problem.

  17. National technical report (Matsushita Electric Industrial Company), Vol. 41, No. 3, June 1995. Special issue on environmental technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    ;Contents: Preface to Special Issue on Environmental Technologies; Total System for Recycling and Optimal Treatment of Waste Home Electric Appliances; Material Reduction Design Using Computer Aided Engineering; Rewritable Thermal Recording Sheet; Reusable Taping System; Estimating Method for Disassembly of Home Appliances; Thermal Design Technique to Reduce Furnace Running Cost to Half; Study of Air Conditioner Using HFC Refrigerant Blend; High-Efficiency Compact Rotary Compressor Using New Refrigerant HFC 134a for Automotive Air Conditioner; Simulation for Refrigerators Using HFC 134a; Zero-ODP (Ozone Depletion Potential) Rigid Insulation Foams for Refrigerators; Heat Energy of Industrial Waste Combustion Gas Utilization System; Exhaust Gas Denitrification System for Car Road Tunnels and Underground Parking Areas; Apparatus for Regenerating Diesel Particulate Filter Using Microwave; Analysis of Advanced Treatment System of Heavy Metals in Waste Water; Ventilating and Air-Conditioning System for Energy-Saving Houses; Garbage Disposer; and Anti-Microbial Resin and Applications to Products in Harmony with Living Environment.

  18. Selected aspects of the supply chain management in the aerospace industry

    Directory of Open Access Journals (Sweden)

    Ivan KOBLEN

    2013-03-01

    Full Text Available The paper in the introductory part underlines some factors concerning the aerospace supply chain management (SCM issue. Authors inform on selected definitions in this topic, levels of supply chain and its maturity. The authors are focusing on introducing of the explanation of main specifics of SCM in aerospace industry (original equipment manufacturer, processes and requirements for the suppliers selection and subsequently inform on the role and mission of selected international organizations involved in aerospace SCM and quality issues, namely The Aerospace and Defence Industries Association of Europe (ASD, International Aerospace Quality Group (IAQG and European Aerospace Quality Group (EAQG. The information on Quality Management System in the framework of aerospace industry and SCM are also introduced. The part of paper is dealing with information systems useful in the SCM (the Digital Product Chain and Enterprise Resource Planning. The last part of paper is focused on issue concerning the success factors for SCM in the aerospace industry. In the conclusion part the authors emphasize some aspects and factors regarding the aerospace SCM and summarize the key challenges in the area of SCM in the aerospace industry.

  19. A Suitable Software Process Improvement Model for the UK Healthcare Industry

    Science.gov (United States)

    Nguyen, Tien D.; Guo, Hong; Naguib, Raouf N. G.

    Over the recent years, the UK Healthcare sector has been the prime focus of many reports and industrial surveys, particularly in the field of software development and management issues. This signals the importance of growing concerns regarding quality issues in the Healthcare domain. In response to this, a new tailored Healthcare Process Improvement (SPI) model is proposed, which takes into consideration both signals from the industry and insights from literature.

  20. Innovative industry alignment at RMIT to develop skills for uranium industries

    International Nuclear Information System (INIS)

    Bhargava, S.K.

    2010-01-01

    'Full text:' RMIT University has recently introduced new teaching and research training programs on uranium processing technology at both undergraduate and postgraduate level. These programs have been implemented to improve young scientists and engineers' awareness of Australia's uranium processing industry, and to help provide future employees with improved background knowledge to the industry. The teaching program involves joint course development and lectures delivered by the leading scientists from ANSTO (Dr Suzanne Burling and Dr Chris Griffith) and Rio Tinto (Dr Stephen Grocott). This lecture series, which is offered to final year applied science and chemical engineering students, covers a range of topics and issues related to uranium processing including uranium mining, methods for chracterising uranium ores, extraction of uranium, the nuclear fuel cycle, waste and safety. The research training program involves honours and PhD students undertaking research projects on uranium mineralogy and uranium extraction. Research students are also provided with extensive training on how to conduct research safely using radioactive materials. The research programs are undertaken in RMIT's new EPA approved, low level radiation laboratory which has been dedicated to research projects on uranium processing. An extended overview of both of these new programs will be presented. This program is unique in Australia and is designed to address the issue of skill shortage in the ever growing Uranium industry world wide. International collaborators in this program will be most welcomed. (author)

  1. Potential environmental effects of energy conservation measures in northwest industries

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, M C; Gygi, K F; Hendrickson, P L

    1992-01-01

    The Bonneville Power Administration (Bonneville) has identified 101 plants in the Pacific Northwest that account for 80% of the region's industrial electricity consumption. These plants offer a precise target for a conservation program. PNL determined that most of these 101 plants were represented by 11 major industries. We then reviewed 36 major conservation technologies used in these 11 industrial settings to determine their potential environmental impacts. Energy efficiency technologies designed for industrial use may result in direct or indirect environmental impacts. Effects may result from the production of the conservation measure technology, changes in the working environment due to different energy and material requirements, or changes to waste streams. Industry type, work-place conditions, worker training, and environmental conditions inside and outside the plant are all key variables that may affect environmental outcomes. To address these issues this report has three objectives: Describe potential conservation measures that Bonneville may employ in industrial programs and discuss potential primary impacts. Characterize industrial systems and processes where the measure may be employed and describe general environmental issues associated with each industry type. Review environmental permitting, licensing, and other regulatory actions required for industries and summarize the type of information available from these sources for further analysis.

  2. What nuclear industry can learn from the digital transformation of high-tech industries

    International Nuclear Information System (INIS)

    Confais, E.

    2017-01-01

    The aircraft industry, the oil industry and the shipbuilding industry share with nuclear industry common issues like the importance of security and safety, long investment cycles and a fierce worldwide competition. All these industries can inspire one another to face these challenges with their own use of digital technologies. A common use of digital technologies is to favor innovation and accelerate its implementation in the industrial cycle through the shortening of both the certification step and the upgrading-time of the production line. Innovation requires creativity and creativity needs freedom, digital technologies can favor initiatives by shadowing the traditional hierarchy at opening the company to a new world of ideas. It also appears that digital technologies allows the quick processing of massive volumes of data that could be used for preventive maintenance and the optimization of the equipment. The broad digitalization of the economy has a dark side: the rising of cyber risks and enterprises have to face them which generally implies to rethink security inside the enterprise. Some companies have overhauled their IT department and have segregated and monitored the access to data. (A.C.)

  3. IEA Journal: Issue 1 [Autumn 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    IEA Energy covers a broad range of today's energy issues, from technology to market developments, and highlights the energy challenges of tomorrow. It features a variety of perspectives from government, industry and other intergovernmental organisations -- both in IEA member countries and beyond -- as well as from IEA experts.

  4. Transmission access raises unresolved economic issues

    International Nuclear Information System (INIS)

    Happ, H.H.

    1994-01-01

    The electric utility industry is in the process of gradual change from a fully regulated industry to one of partial deregulation. Instead of relying on regulation to achieve a fair and equitable price to the consumer for electric energy, the reliance is placed more and more on market forces, through competition, to provide wholesale energy at the best market price. Clearly, open transmission access is required to create a viable competitive wholesale market for new generation resources. This article describes four unresolved, or at least partially unresolved, issues associated with transmission access for wholesale wheeling. Wheeling has been defined as the use of a utility's transmission facilities to transmit power for other buyers and sellers. At least three parties are involved in a wheeling transaction: a seller, a buyer, and one or more wheeling utilities that transmit the power from the seller to the buyer. This article considers wholesale or bulk wheeling only, and does not consider retail wheeling. The four unresolved economic issues described in this article pertain to transmission access: Actual cost of providing transmission services, Methodology or methodologies used in evaluating the cost of wheeling, Contract path versus the actual power flows of the wheel, Issues associated with the formation of transmission regions

  5. Determinants of Iran's BilateralIntra-industry Trade in Pharmaceutical Industry.

    Science.gov (United States)

    Aghlmand, Siamak; Rahimi, Bahlol; Farrokh-Eslamlou, Hamidreza; Nabilou, Bahram; Yusefzadeh, Hassan

    2018-01-01

    Among non-oil and in trade arena, drug has always been strategic importance and most government especially industrialized countries pay special attention to its production and trade issues. Thus, having a comprehensive view from economic perspective to this section is essential for suggesting intervention. This was a descriptive-analytical and panel study. In this study, gravity model is used to estimate Iran's bilateral intra-industry trade in pharmaceutical products in the 2001-2012 periods. To illustrate the extent of pharmaceutical's intra-industry trade between Iran and its major trading partners, the explanatory variables of market size, income, factor endowments, distance, cultural contributions, and similarities and also special trade arrangements have been applied. Analysis of factors affecting Iran's bilateral intra-industry trade in pharmaceutical industry showed that the average GDP and cultural similarities had a significant positive impact on Iran's bilateral IIT, while the difference in GDP has a negative and significant effect. Coefficients obtained for the geographical distance and the average ratio of total capital to the labor force is not consistent with theoretical expectations. Special trade arrangements did not have significant impact on the extent of bilateral intra-industry trade between Iran and its trading partners. The knowledge of the intra-industry trade between Iran and its trade partners make integration between the countries. Factors affecting this type of trade pattern underlie its development in trade relationship. Therefore, the findings of this study would be useful in helping to develop and implement policies for the expansion of the pharmaceutical trade.

  6. Dealing with opponents of industry: Let the allies work for you

    International Nuclear Information System (INIS)

    Duncan, Colin

    1998-01-01

    Full text: The opponents of industry, and most Green campaigning groups, thrive on controversy. Opponents of industry, and of the nuclear industry in particular, can expect to find a more receptive public audience than do the companies they attack. Therefore, there is little to be gained by industry entering into direct conflict, or even high-profile debate, with opponents. Industry spokesmen do not rate as being trustworthy in the eyes of the public. And it does not pay to directly attack the credibility, however justified such criticisms are, of the likes of Greenpeace. In a polarised debate, if your company is seen to be partisan and the opponents to be neutral, the public will gravitate towards the opponents. The way forward is to influence the forces which ran help industry establish the middle ground to dissipate the tension. The problem for industry is not so much that it has opponents, but that it does not have enough third party advocates to mediate in disputes. Therefore, the first step is to identify the key issues facing a company or industry. The second, is to work with credible people and organisations to establish independent mechanisms which can prevent an unfavourable climate building up around those issues. The art of dealing with opponents, is the art of identifying such mechanisms (people, organisations and professions) to influence an increasingly cynical and distrusting public. These opinion-formers should be the main focus of a communications strategy designed to counter opponents. They are the conduit through which to influence public opinion in general. For instance, the debate surrounding the incidence of leukaemia around nuclear sites cannot be answered by the industry using the facts, scientific evidence, or by entering into a noisy dialogue with opponents. However, the medical profession, along with scientists working outside the nuclear industry, is in a position to shift public concern away from nuclear sites. BNFL has promoted

  7. Year 2000 commercial issues

    International Nuclear Information System (INIS)

    Kratz, M.P.J.; Booth, R.T.

    1998-01-01

    This presentation focused on commercial aspects of the Y2K including: (1) special communication issues, (2) outsourcing transactions, (3) joint ventures and the significance for the oil and gas industry, and (4) contingency planning. Communication issues involve interaction with suppliers and vendors of critical systems, liability for Y2K communications (misrepresentation, defamation, promissory estoppel, statutory liability), securities disclosure (Canadian and US SEC requirements), protected communications, protection for Year 2000 statements. Outsourcing problems highlighted include resistance of suppliers to assume responsibility for Y2K problem remediation, factors which support and negate supplier responsibility, scope of suppliers' obligation, and warranties in respect of third party software. Regarding joint ventures, questions concerning limitations on liability, supply warranties, stand-by arrangements, stockpiling inventory, indemnities, confidentiality, operator compensation versus operator risk, and insurance were raised and addressed. Among contingency planning issues the questions of Y2K legal audit, and disclosure aspects of contingency planning were the featured concerns. figs

  8. Year 2000 commercial issues

    Energy Technology Data Exchange (ETDEWEB)

    Kratz, M.P.J.; Booth, R.T. [Bennett Jones, Calgary, AB (Canada)

    1998-12-31

    This presentation focused on commercial aspects of the Y2K including: (1) special communication issues, (2) outsourcing transactions, (3) joint ventures and the significance for the oil and gas industry, and (4) contingency planning. Communication issues involve interaction with suppliers and vendors of critical systems, liability for Y2K communications (misrepresentation, defamation, promissory estoppel, statutory liability), securities disclosure (Canadian and US SEC requirements), protected communications, protection for Year 2000 statements. Outsourcing problems highlighted include resistance of suppliers to assume responsibility for Y2K problem remediation, factors which support and negate supplier responsibility, scope of suppliers` obligation, and warranties in respect of third party software. Regarding joint ventures, questions concerning limitations on liability, supply warranties, stand-by arrangements, stockpiling inventory, indemnities, confidentiality, operator compensation versus operator risk, and insurance were raised and addressed. Among contingency planning issues the questions of Y2K legal audit, and disclosure aspects of contingency planning were the featured concerns. figs.

  9. Does Industrial Ecology provide any new Perspectives?

    OpenAIRE

    Røine, Kjetil

    2000-01-01

    The research question in this report was, as the title alludes: Does industrial ecology provide any new perspectives? If yes, what are the new aspects? To answer these questions, a literature study has been conducted. The answer to the first question is yes. We claim that what is new about industrial ecology is the expansion of the system borders within which the actors operate. Bearing this in mind, it is proposed that the most important issue in industrial ecology is to unite the two m...

  10. Industrial relocation and energy consumption: Evidence from China

    International Nuclear Information System (INIS)

    Zhao Xiaoli; Yin Haitao

    2011-01-01

    With economic development and the change of industrial structure, industrial relocation is an inevitable trend. In the process of industrial relocation, environmental externality and social cost could occur due to market failure and government failure. Little attention has been paid to this issue. In this paper, we address it with a theoretical analysis and an empirical investigation on the relationship between China's industrial relocation in the early 1990s and energy consumption which is the primary source of CO 2 emission, an environmental externality that causes increasing concerns. The macro-policy analysis suggests that there would be a positive link between China's industrial relocation in the early 1990s and energy saving (and environmental externalities reduction). Using fixed-effect regression model and simulation method, we provide an empirical support to this argument. In order to further reduce environmental externalities and social cost in the process of industrial relocation, we provide policy suggestions as follows: First, strengthen the evaluation of environmental benefits/costs; Second, pay more attention to the coordinated social-economic development; Third, avoid long-lived investment in high-carbon infrastructure in areas with industries moved in; Fourth, address employment issue in the areas with industries moved out. - Research highlights: → Little attention has been paid to the linkage between industrial relocation and environmental externality. → Our macro-policy analysis suggests that there would be a positive link between China's industrial relocation in the early 1990s and energy saving (and environmental externalities reduction). → Using fixed-effect regression model and simulation method, we find a positive link between China's industrial relocation in the early 1990s and energy saving. → Policy suggestions to further reduce environmental externalities and social cost in the process of industrial relocation are discussed.

  11. Benchmarking Sustainability Practices Use throughout Industrial Construction Project Delivery

    Directory of Open Access Journals (Sweden)

    Sungmin Yun

    2017-06-01

    Full Text Available Despite the efforts for sustainability studies in building and infrastructure construction, the sustainability issues in industrial construction remain understudied. Further, few studies evaluate sustainability and benchmark sustainability issues in industrial construction from a management perspective. This study presents a phase-based benchmarking framework for evaluating sustainability practices use focusing on industrial facilities project. Based on the framework, this study quantifies and assesses sustainability practices use, and further sorts the results by project phase and major project characteristics, including project type, project nature, and project delivery method. The results show that sustainability practices were implemented higher in the construction and startup phases relative to other phases, with a very broad range. An assessment by project type and project nature showed significant differences in sustainability practices use, but no significant difference in practices use by project delivery method. This study contributes to providing a benchmarking method for sustainability practices in industrial facilities projects at the project phase level. This study also discusses and provides an application of phase-based benchmarking for sustainability in industrial construction.

  12. Overview of nuclear power plant equipment qualification issues and practices

    International Nuclear Information System (INIS)

    Torr, K.G.

    1989-01-01

    This report presents a view of and commentary on the current status of equipment qualification (EQ) in nuclear industries of the major western nations. The introductory chapters discuss the concepts of EQ, the elements of EQ process and highlight some of the key issues in EQ. A brief review of industry practices and some of the prevalent industrial standards is presented, followed by an overview of current regulatory positions in the USA, France, Germany and Sweden. A summary and commentary on the latest research findings on issues relating to accident simulation, to aging simulation and some special topics related to EQ, has been contributed by Franklin Research Centre of Philadelphia. The last part of the report deals with equipment qualification in Canada and gives recommendations on EQ for new plants as well as currently operational CANDU nuclear power plants

  13. METHODOLOGICAL ISSUES OF MODELING OF THE EFFICIENCY OF LABOR IN THE RUSSIAN DEFENSE INDUSTRY ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Sokolov A. V.

    2016-12-01

    Full Text Available The article highlights main factors affecting productivity of enterprises in the defense industry. With the elimination of a number of factors, we determined functional dependence form between the change in productivity (at the company level in comparison to the industry average and relative wages (at the company level in comparison to the industry average taking into account regional fac tor. It is shown that dependence is of exponential character and is marked by inelasticity of productivity with respect to wages. This means that the growth of employees’ wages in comparison to average levels for the industry to which the enterprise belongs, as well as average levels for the federal subject in which the enterprise is located, leads to workforce productivity increase, however, the rate of increase slows down with further wage growth. Levels of wage growth (in relation to industry averages adjusted for regional factor maximizing enterprises’ target values are determined with specific features of such enterprises (manufacturing of both military and civilian products taken into account.

  14. IEA Journal: Issue 1 [Autumn 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    IEA Energy covers a broad range of today's energy issues, from technology to market developments, and highlights the energy challenges of tomorrow. It features a variety of perspectives from government, industry and other intergovernmental organisations -- both in IEA member countries and beyond -- as well as from IEA experts.

  15. Challenging industry conceptions with provotypes

    DEFF Research Database (Denmark)

    Boer, Laurens; Donovan, Jared; Buur, Jacob

    2013-01-01

    a multi-stakeholder project that concerned the field of indoor climate how provotypes facilitate transfers of user knowledge to industry, and how they contribute to the development of new products and services. We end by framing the role of the design researcher and discuss the politics that are inherent......Design researchers have an important role to play when engaged with user-driven design projects in industry. Design researchers can craft ethnographic material to facilitate transfers of user-knowledge to industry, and demonstrate how this material can be used in the design of new products...... and services. However, ethnographic findings can reveal issues that are at tension with conceptions of the project members from industry. Other than brushing these tensions aside, we propose provotyping (provocative prototyping) as an approach to constructively build on them as a resource for change...

  16. MANAGEMENT OF ECONOMIC AND FINANCIAL STRATEGY INDUSTRIAL CORPORATION

    Directory of Open Access Journals (Sweden)

    K. B. Dobrova

    2010-01-01

    Full Text Available Issues related to creation of tools making it possible to efficiently control financial and economic production capability of industrial corporations making part of Russian military-industrial complex are discussed on example of an aviation enterprise. A system of balanced indicators is proposed to be used to develop corporation’s adaptive management strategies.

  17. NST Quarterly - April 2000 issue

    International Nuclear Information System (INIS)

    1999-01-01

    NST Quarterly reports current development in Nuclear Science and Technology in Malaysia. In this issue it highlights MINT activities in genetic engineering. The articles summarized the improvement of orchids and tulips through genetic engineering and generating new varieties for the floriculture industry. It also reported, MINT won gold and silver at the International Invention 2000, 12-16 April 2000, Geneva

  18. 78 FR 57104 - Airworthiness Directives; Diamond Aircraft Industries Airplanes

    Science.gov (United States)

    2013-09-17

    ... p.m., Monday through Friday, except Federal holidays. For service information identified in this... AD docket. Relevant Service Information Diamond Aircraft Industries GmbH has issued Mandatory Service... service information related to this AD, contact Diamond Aircraft Industries GmbH, N.A. Otto-Str.5, A-2700...

  19. Photovoltaic commercialization: an analysis of legal issues affecting a government-accelerated solar industry

    Energy Technology Data Exchange (ETDEWEB)

    Lamm, D.

    1980-06-01

    The Photovoltaics Research, Development, and Demonstration Act of 1978 is discussed. Legal issues, including solar access, the need for performance standards, the effects of building codes on photovoltaic system use and commercialization, and manufacturer and installer performance guarantees, are examined. Electric utility policies are examined, including interconnection, and rates and legal issues affecting them. (LEW)

  20. Optimizing inventory management in the insulation manufacturing industry

    OpenAIRE

    Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

    2016-01-01

    Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. T...

  1. Sustainable treatment of hydrocarbon-contaminated industrial land

    OpenAIRE

    Cunningham, Colin John

    2012-01-01

    Land contamination by petroleum hydrocarbons is a widespread and global environmental pollution issue from recovery and refining of crude oil and the ubiquitous use of hydrocarbons in industrial processes and applications. Sustainable treatment of hydrocarbon-contaminated industrial land was considered with reference to seven published works on contaminated railway land including the track ballast, crude oil wastes and contaminated refinery soils. A methodology was developed...

  2. International trade and waste and fuel management issue, 2009

    Energy Technology Data Exchange (ETDEWEB)

    Agnihotri, Newal (ed.)

    2009-01-15

    The focus of the January-February issue is on international trade and waste and fuel managment. Major articles/reports in this issue include: Innovative financing and workforce planning, by Donna Jacobs, Entergy Nuclear; Nuclear power - a long-term need, by John C. Devine, Gerald Goldsmith and Michael DeLallo, WorleyParsons; Importance of loan guarantee program, by Donald Hintz; EPC contracts for new plants, by Dave Barry, Shaw Power Group; GNEP and fuel recycling, by Alan Hanson, AREVA NC Inc.; Safe and reliable reactor, by Kiyoshi Yamauchi, Mitsubishi Heavy Industries, Ltd.; Safe, small and simple reactors, by Yoshi Sakashita, Toshiba Corporation; Nuclear power in Thailand, by Tatchai Sumitra, Thailand Institute of Nuclear Technology; and, Nuclear power in Vietnam, by Tran Huu Phat, Vietnam Atomic Energy Commission. The Industry Innovation article this issue is Rectifying axial-offset-anomaly problems, by Don Adams, Tennessee Valley Authority. The Plant Profile article is Star of Stars Excellence, by Tyler Lamberts, Entergy Nuclear Operations, Inc.

  3. Nanotechnology and accounting issues

    OpenAIRE

    Abedalqader Rababah

    2017-01-01

    Nanotechnology is a new advanced technology used in the industry. This study conducted an investigation on the literature and highlighted the accounting issues which related to the implement of nanotechnology, especially the change of cost structure and expected solutions for the increasing of indirect costs which need more accurate allocation to the unit of products. Also, this study investigated on the future expected accounting risks for using nanotechnology. Finally, this study will open ...

  4. Recent developments: Industry briefs

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This is the February 1992 'Industry Briefs' portion of the 'Recent Developments' section. Issues mentioned are: (1) closure of San Onofre Unit 1, (2) start-up of Penly Unit 2, (3) signing of a safeguards agreement with North Korea, (4) Canadian nuclear activities in Romania, and (5) the merger of two Japanese fuel cycle companies

  5. Legal and regulatory education and training needs in the healthcare industry.

    Science.gov (United States)

    Henson, Steve W; Burke, Debra; Crow, Stephen M; Hartman, Sandra J

    2005-01-01

    As in any other industry, laws and regulations significantly impact the functioning of the healthcare industry. Some laws, such as those relating to malpractice and social insurance systems, affect the manner in which the industry operates. Other laws, such as those regulating antitrust and employment practices, affect the organization and the environment in which the industry operates. It is increasingly important that practitioners and managers be cognizant of this complex and dynamic legal minefield. This study examined healthcare managers and executives' knowledge of 9 key issues in the legal and regulatory environment of the healthcare industry. Specifically, the study focused on knowledge concerning tort and contract liability, insurance law, labor and employment regulation, criminal and ethical responsibility, antitrust regulation, the law governing business associations and recent developments. Findings suggest that the levels of knowledge required to manage legal and regulatory issues are much greater than the existing levels of knowledge.

  6. Sir John Macpherson, the first but sometimes overlooked Professor of Psychiatry at the University of Sydney.

    Science.gov (United States)

    White, Richard T

    2014-08-01

    To chronicle the creation of the Chair of Psychiatry at the University of Sydney, and the career and legacy, in New South Wales, of the first incumbent, Professor Sir John Macpherson CB MD FRCPE. The creation of the Chair, Macpherson's appointment, and his contributions to psychiatry in Sydney during the 52 months of his tenure, are well documented in contemporaneous sources and demonstrate that he was a very worthy Foundation Professor of Psychiatry at the University of Sydney. There are several possible reasons why Macpherson has been overlooked, including an erroneous statement in The World History of Psychiatry (1975) that William Siegfried Dawson, his successor from 1927 to 1952, was the first Professor of Psychiatry. © The Royal Australian and New Zealand College of Psychiatrists 2014.

  7. Impact of ARPANS-like legislation on minerals industry in Australia - the TENORM issue

    International Nuclear Information System (INIS)

    Koperski, J.

    2001-01-01

    Processing of minerals results in increased concentrations of the naturally occurring radioactive materials (NORM) in mineral products and/or process wastes, relative to those in the source materials. Due to the current legislative trends this technologically enhanced naturally occurring radioactive material (TENORM) phenomenon may bring mineral processing practices, including disposal of NORM-elevated wastes, into the realm of regulatory concern for practically all mineral-processing operations in Australia. The 1999 Australian Radiation Protection and Nuclear Safety (ARPANS) legislation has been based on the 1996 International Basic Safety Standards (BSS) recommended by the International Atomic Energy Agency (IAEA). As such, it contains very restrictive exemption criteria from the provisions of the legislation. ARPANS legislation is only binding upon Commonwealth entities. They, incidentally, do not include minerals industry operations. This legislation has been incompatible with the nature of the minerals industry. However, the current legislative developments have been aimed at imposing this legislation onto States and Territories. If this happens, and the current ARPANS legislative exemption criteria are not rationalised, major radiation safety-related operational and administrative impacts on the Australian minerals industry will occur. They will result in a marked burden to the national economy for yet to be clearly identified health and safety benefits. It is thus recommended that, without compromising rational radiation protection principles and practices, legislation commensurate with the nature of the minerals industry operations, national and state circumstances, conditions and interests be adopted in Australia. Such legislation would follow the spirit of the IAEA 1996 recommendations. Copyright (2001) Australasian Radiation Protection Society Inc

  8. Comparative Study On The Ethical Perceptions Of Contractors And Designers In The China Construction Industry

    Science.gov (United States)

    Kang, Byung Gyoo; Long, Kaiwen; Zhang, Cheng; Li Hao, Jian

    2017-12-01

    Ethics is becoming one of the most important requirements for successful business in the 21st century. The construction industry cannot be exceptional from this trend. However construction ethics management requires different approaches from other industries, as the products of the industry are construction projects which are completely different from mass production. Contractors and designers are two major participants in construction projects. The roles and responsibilities of these two project stakeholders decisively influence all aspects of construction project. Practically ethical perceptions of contractors and designers are one of main aspects to be considered for the effective and efficient management of ethics for the construction industry. This research has investigated the ethical perceptions of contractors and designers in the China construction industry. A questionnaire survey which contains 15 ethical issues and 6 demographic factors has been conducted. 170 construction professionals from construction companies and consulting companies have been participated in this survey. These 15 ethical issues are ranked in terms of seriousness, frequency and importance for both contractors and designers as a single group to understand the overall perceptions in the industry. The analysis has also been conducted for contractors and designers respectively to make comparisons between them. The top three serious ethical issues in the industry are ‘Bribery and corruption’, ‘Failure to practice whistle-blowing’ and ‘Improper bidding practices’. Contractors and designers showed similar outcomes for the top five important ethical issues. But for the middle ranged ethical issues, they showed some differences. Further researches are required to identify the causes of the similarity and differences.

  9. Special issue: Logistics systems design in Latin America

    Directory of Open Access Journals (Sweden)

    Miguel Gaston Cedillo Campos

    2017-10-01

    Under this context, this Special Issue of the Journal of Industrial Engineering and Management (JIEM gathers nine significant contributions, which from a Latin American approach, enhance the logistics systems body of knowledge focused on emerging markets.

  10. Benefits of nitrogen for food, fibre and industrial production

    NARCIS (Netherlands)

    Stoumann Jensen, L.; Schjoerring, J.K.; Hoek, K.W. van der; Damgaard Poulsen, H.; Zevenbergen, J.F.; Pallière, C.; Lammel, J.; Brentrup, F.; Jongbloed, A.W.; Willems, J.; Grinsven, H. van

    2011-01-01

    Nature of the issue • Reactive nitrogen (N r ) has well-documented positive eff ects in agricultural and industrial production systems, human nutrition and food security. Limited N r supply was a key constraint to European food and industrial production, which has been overcome by Nr from the

  11. Chaos theory perspective for industry clusters development

    Science.gov (United States)

    Yu, Haiying; Jiang, Minghui; Li, Chengzhang

    2016-03-01

    Industry clusters have outperformed in economic development in most developing countries. The contributions of industrial clusters have been recognized as promotion of regional business and the alleviation of economic and social costs. It is no doubt globalization is rendering clusters in accelerating the competitiveness of economic activities. In accordance, many ideas and concepts involve in illustrating evolution tendency, stimulating the clusters development, meanwhile, avoiding industrial clusters recession. The term chaos theory is introduced to explain inherent relationship of features within industry clusters. A preferred life cycle approach is proposed for industrial cluster recessive theory analysis. Lyapunov exponents and Wolf model are presented for chaotic identification and examination. A case study of Tianjin, China has verified the model effectiveness. The investigations indicate that the approaches outperform in explaining chaos properties in industrial clusters, which demonstrates industrial clusters evolution, solves empirical issues and generates corresponding strategies.

  12. The North Sea contracting industry

    International Nuclear Information System (INIS)

    Wright, P.J.C.

    1996-09-01

    The North Sea Contracting Industry provides in-depth profiles of major contracting organisations including manpower, facilities, expertise, future directions and financial details. It addresses key issues such as: how will the role of operators and contractors change toward 2000 and beyond?; how will the contractor-operator relationship develop?; will the contractors take a more speculative role in projects such as leasing and contract to produce?; does the future belong to broad skilled providers or small specialised niche players, or both?; and how will rapid technological improvements affect the industry? (author)

  13. Medical tourism in Iran: Issues and challenges.

    Science.gov (United States)

    Jabbari, Alireza; Delgoshaei, Bahram; Mardani, Raja; Tabibi, Seid Jamaledin

    2012-01-01

    Medical tourism is rapidly becoming a worldwide, multibillion-dollar industry. Iran has a high potential for this industry. The purpose of this study was to examine the medical tourism cluster, using Diamond Analysis tool. This study is a descriptive, analytical and qualitative one. Thirty professionals and researchers in this field were interviewed and official documents belonging to the Health ministry as well as tourism organization and finally related literature were examined. The data was analyzed using content analysis method. Positive and negative parts of the medical tourism industry of Iran were determined according to diamond of advantage. The strategic issues were identified and a number of possible solutions for addressing them were recommended. More and effective public-private participations, aggressive marketing, improving infrastructures, and international accreditation of health care facilities and human resources development could improve medical tourism industry in the country.

  14. Tobacco Industry and Sustainability: A Case of Indonesia Cigaretes Company

    Directory of Open Access Journals (Sweden)

    Marveys Wilfred Ayomi

    2015-09-01

    Full Text Available The following report is conducted to analyse global tobacco industry and evaluate the initiatives taken by the industry to promote sustainable business development. The purpose of the overall assessment of tobacco industry and sustainability is to determine the level of commitment that the industry gives to undertake issues addressed in sustainability. The elements discussed in this report outlined several key issues including the general outlook of the current industry operation as well as in the long run, damages caused by the industry activity affecting social, health and environmental conditions and Industry’s actions prior to sustainability. The discussion of tobacco industry actions in particular further examines sustainable initiatives implemented in economic, social, health and environment sectors. Close evaluation is carried out prior to each sector analyzing the commitmentof the industry to justify how devoted it is to bring about sustainable business practices. The second part of the discussion draws a practical analysis by comparing the nine principles of Epstein’ssustainability performance and the success of HM Sampoerna Tbk PT (One of Indonesia’s largest tobacco companies sustainability performance. This report however bears a set of limitations and drawbacks such as a lack of deeper evaluation on the industry's initiatives in all sectors but particularly the environment aspect as well as its in sufficiency of data collection

  15. An overview of knowledge management (KM) issues for implementation in consultant firms in Malaysian construction industry

    Science.gov (United States)

    Othman, Azlan; Ismail, Syuhaida; Yahya, Khairulzan

    2017-12-01

    In the past few years, there has been a growing interest in treating knowledge as a significant organisational resource. Thus, effective development and implementation of KM requires a foundation in several rich literatures. As a preparation for the competitive industrial nation, KM is an important countenance that should be the point of convergence for the industry players. This paper wishes to draw the attention on the current situation of KM practice, focusing on consultant firms in Malaysian construction industry. Questionnaires were distributed to about 200 respondents working in the industry, with the objective of appraising the KM implementation amongst consultant firms working in construction industry in Malaysia. This paper also gives the overview on KM definition, process, understanding and challenges in construction industry, besides the critical success factor of KM implementation. The literature is restricted on the recent KM study of 17 years research from 2000 to 2017. Finally, this paper proposes the conceptual ideas of relationship between KM process, KM understanding and KM challenges with critical success factor of KM implementation.

  16. Environmental issues of polythylene bags waste and its reuse in construction industry

    International Nuclear Information System (INIS)

    Khan, S.A.; Kamal, M.A.

    2005-01-01

    The main aim of every development and progress is to provide comfort, convenience and prosperity to the mankind. Each development brings a product for the use of public which ends up as a waste after some time. Since the development of plastic in the last century, it has become a popular material used in a wide variety of ways. The problem appears when these items are no longer wanted and how these are disposed, particularly the throwaway plastic material used in wrapping or packaging. Because plastic does not decompose, the amount of plastic waste has increased to the alarming level. The waste problems multifolds, if no reuse option or recycle process has been developed. The plastic shopping bags are one of such products for which no reuse or recycle industry is yet available. Plastic waste problems being multidimensional have attracted world-wide recognition and multiple solutions to tackle the problems are under consideration. There exists a great potential for use of plastic waste in the construction Industry. This study is related to the fabrication of blocks of 'Compressed Plastic Waste (CPW)' and their use in the construction industry, e.g., access ramps for overhead bridges, highway embankments on soft soils, backfill behind retaining walls, foundation support on soft soil and bouancy mats on very soft soils, etc. This paper is dedicated to cost-benefit analysis for the above mentioned uses of the plastic waste blocks. (author)

  17. 2001 Industry Studies: Aircraft

    Science.gov (United States)

    2001-01-01

    improving the quality of products and the speed of bringing products to market . However, substantial issues remain concerning information security... information technology professionals, managers, technicians, and mechanics are being lost. Competition from other industries, aging of the work force...observing the high demand and salaries for information technology professionals and the decline of long-term technologically challenging prospects for

  18. Third ITER International Industry Liaison Meeting

    International Nuclear Information System (INIS)

    Dautovich, D.

    2000-01-01

    Following previous meetings held in 1996 in San Diego and in 1997 in Tokyo, the Third ITER International Industry Liaison Meeting (IILM) meeting was held under the European Chairmanship in Toronto, Canada, November 7-9, 2000. The intention of such meetings is to provide a forum for industrialists of the ITER EDA parties and other interested countries to develop common understandings on important issues of the timing and nature of Industry involvement in the ITER project. This article describes the main views from Industry on the preconstruction and construction phases and the cost and benefit schemes, while summarizing the progress made by the ITER project since the Tokyo meeting

  19. Canada's upstream petroleum industry : 1997 perspective

    International Nuclear Information System (INIS)

    1997-06-01

    A review of the trends and activities in the upstream petroleum industry during 1996 were presented, emphasizing the significance of the industry' contribution to Canada's economy. Among the areas included were highlights of Canada's hydrocarbon reserves, conventional production, frontier production, and non-conventional (oil sands) production. New market opportunities and activities in the pipeline transportation sector were also discussed. Environmental issues including health and safety received due attention. In this regard, the industry's efforts to work with government and other stakeholders to ensure that requirements for land use are balanced with the need to protect wilderness and wildlife habitat, received special mention. 16 figs

  20. Pyrochemistry: from flowsheet to industrial facility

    International Nuclear Information System (INIS)

    Donaldson, N.; Thied, R.; Lamorlette, G.; Greneche, D.

    2001-01-01

    Challenges to any future commercial deployment of pyro-chemistry will be significant. The implications of industrial use must be well understood in technical, economic and social terms to gain commercial and regulatory acceptance. The broad base of knowledge necessary to support general commercial use of pyro-chemistry in the nuclear field is considered. Pyro-chemistry development is discussed in the context of a commercial application-based approach and issues to be addressed are outlined. A stepwise evolutionary development of pyro-chemical processing is anticipated which might allow industrialization in the absence of acceptance of evolutionary development at industrial scale which benefited Purex development. (author)

  1. Food industry: friend or foe?

    Science.gov (United States)

    Yach, D

    2014-01-01

    Open discourse and tolerance between the food industry and public sector is limited. As a result, the public and private sectors are reluctant to collaborate on pressing nutritional issues. Those in the public sector have never heard what they could do to encourage a food company's transition towards healthier foods and beverages, whereas many in the private sector dismissed policies and actions initiated within the public sector. During my career, I have sought to engage the broadest possible stakeholder groups required to develop evidence-based policies and with the aim of improving public health. My recent experience in industry confirmed my view about the need for scientific exchange regardless of the disagreements about policy. Open discourse and partnering is essential if we are to tackle complex food and health issues and improve the global food system. Private-public engagement can provide faster and more sustainable results than government alone without impacting profits. Moreover, a high-quality product in smaller portions will have higher profit margins than a bargain-sized product of lower quality. The food industry and private sector must come together to implement innovative strategies to address urgent nutritional needs. © 2013 The Author. obesity reviews © 2013 International Association for the Study of Obesity.

  2. China’s Strategic Choice of the Coal Industry

    DEFF Research Database (Denmark)

    Guo, Zhengquan; Niu, Dongxiao; Wang, Daojuan

    2012-01-01

    Coal mining industry is one of the most influential industries on environment pollution. In recent years, most studies have shown that green and circular economy is the way to solve the deteriorative environment issue. After introducing green economy theory, including background, concept......, and features, the paper gives us the strategic choice of China’s coal industry. By theoretical analysis, many suggestions have been proposed, including establishment of a people-oriented scientific development ideology, strengthening the implementation of green mining model, encouraging the development...... of circular economy model, promoting coal industrial technological progress, improving management and security technological innovation....

  3. Halal Supply Chain Management Streamlined Practices: Issues and Challenges

    Science.gov (United States)

    Hijrah Abd Kadir, Muhammad; Zuraidah Raja Mohd Rasi, Raja; Omar, Siti Sarah; Manap, Zariq Imran Abdul

    2016-11-01

    The quickly developing worldwide halal in business sector has given a remarkable window of chance, which empowers Malaysia to the renowned halal centre in worldwide (known as Halal-hubs). Malaysia also has proactively taken a lead in halal activities, which is presently considered as the benchmark for a halal framework worldwide. Malaysia also set up the Halal Industry Development Corporation (HDC) which driving a wide range of halal activities since the demand of halal food has increased significantly which is very crucial for a Muslim in ensuring its authenticity and integrity. Even in parallel to this developments, many studies has been conducted because there are many issues still occurs in the food industry. The issue of consumer awareness and understanding the halal principles, mixing of halal and non- halal products, halal certification and logo compliance with Shariah law and lack of regulation and enforcement need the serious attention by all parties along the supply chain. The challenges occur mainly in the halal food segregation and halal traceability of the products. The unit of analysis in this study different halal stakeholders group which are JAKIM, Halal Development Centre (HDC), Raw Material Manufacturers, Retailers and Government Agencies. This paper attempt discusses the issues and challenges occurs in the halal supply chain and faced by the practitioners as well as the relevant parties involved in the industry especially for food products manufacturers. The study would like to give a basic information about the issues and challenges in the contribution of Halal Supply Chain Management (HSCM) as well as for the future studies.

  4. Biosensor: an emerging safety tool for meat industry.

    Science.gov (United States)

    Singh, Pradeep Kumar; Jairath, Gauri; Ahlawat, Satyavir Singh; Pathera, Ashok; Singh, Prashant

    2016-04-01

    The meat industry associated with the health hazards like deadly pathogens, veterinary drugs, pesticide residues, toxins and heavy metals is in need of a tool to tackle the awful situation and ensure safer product to consumer. The growth in the industry, global trade scenario, stringent laws and consumer awareness has placed an extra onus on the meat industry to meet out the expectations and demands. Biosensors are the latest tool of detection in the fast growing industries including the food industry. Hence an attempt is envisaged here to review the possibility of harnessing biosensors as tool of safety to safe guard the consumer health and address safety issues in reference to the common threats of concern in the meat industry.

  5. Determinants of Iran’s Bilateral Intra-industry Trade in Pharmaceutical Industry

    Science.gov (United States)

    Aghlmand, Siamak; Rahimi, Bahlol; Farrokh-Eslamlou, Hamidreza; Nabilou, Bahram; Yusefzadeh, Hassan

    2018-01-01

    Among non-oil and in trade arena, drug has always been strategic importance and most government especially industrialized countries pay special attention to its production and trade issues. Thus, having a comprehensive view from economic perspective to this section is essential for suggesting intervention. This was a descriptive-analytical and panel study. In this study, gravity model is used to estimate Iran’s bilateral intra-industry trade in pharmaceutical products in the 2001-2012 periods. To illustrate the extent of pharmaceutical’s intra-industry trade between Iran and its major trading partners, the explanatory variables of market size, income, factor endowments, distance, cultural contributions, and similarities and also special trade arrangements have been applied. Analysis of factors affecting Iran’s bilateral intra-industry trade in pharmaceutical industry showed that the average GDP and cultural similarities had a significant positive impact on Iran’s bilateral IIT, while the difference in GDP has a negative and significant effect. Coefficients obtained for the geographical distance and the average ratio of total capital to the labor force is not consistent with theoretical expectations. Special trade arrangements did not have significant impact on the extent of bilateral intra-industry trade between Iran and its trading partners. The knowledge of the intra-industry trade between Iran and its trade partners make integration between the countries. Factors affecting this type of trade pattern underlie its development in trade relationship. Therefore, the findings of this study would be useful in helping to develop and implement policies for the expansion of the pharmaceutical trade. PMID:29881438

  6. China's petroleum industry

    International Nuclear Information System (INIS)

    Boykiw, A.; Katsuris, D.

    1997-01-01

    Petroleum and natural gas resources, industry organization, production, pipeline construction and other transportation issues, refining and business aspects of the Chinese petroleum and natural gas industries were reviewed. The need for large amounts of foreign capital and western technology to stem the deficit in domestic hydrocarbon supply were emphasized as being responsible for the creation in China of favourable conditions for foreign participation in oil and gas exploration, and for the growing confidence for Western investment in China. The most important considerations for successful participation in the economic development of China include: understanding the roles of networking, cultural affinity and reciprocity; hands-on management; finding an appropriate business partner, agent/distributor, or joint venture partner; and understanding local peculiarities and customs. 3 refs

  7. Are new industry policies precautionary?

    DEFF Research Database (Denmark)

    Galland, Daniel; McDaniels, Timothy L

    2008-01-01

    . The paper finally argues that, although in practice, policy makers generally tend to make incremental choices that are reactive to diverse issues, new industries could adopt more precautionary policies based on processes of public negotiation, analytical decision making and regional planning based......This paper argues that regulatory processes and outcomes in the context of a new industry could respond to mechanisms and factors that shape governmental agendas, illustrating how policy can behave reactively rather than in a precautionary manner. In the case of salmon aquaculture, an emerging...... industry characterized by risks, uncertainties, exponential growth, economic significance and environmental controversy, the outcomes of such reactive policies are generally reflected in siting criteria that yield implicit environmental and socio-economic disadvantages and trade-offs. This paper proposes...

  8. Verkenning technologische oplossingen voor de grafische industrie en verpakkingsdrukkerijen

    NARCIS (Netherlands)

    Lijzen JPA; Hoogenkamp AWHM

    1992-01-01

    This overview of technological measures for mayor environmental issues of the printing industry is worked out with a method developed by the RIVM/LAE the first half of 1992. The main goal of this study is to gain information for a research programm on the Printing Industry for the 'Regulation

  9. Human Resource Management Practice Tourism and Hotel Industry

    Directory of Open Access Journals (Sweden)

    Al Hrou S.A.

    2014-01-01

    Full Text Available Due to the importance of human resources management (HRM in promoting competitiveness in tourism and hotel industry, this review intend to enhance the understanding of practical issues of HRM more importantly since it involve organizing the management of human resources, with respect to accomplishment of organizational objective further more it shows that the issues either related to external factors, which include technological change, legislation and regulation, and national culture, globalization, or internal factors including size, industry and sector characteristic and structure of an organization, strategy and past practice of HRM. On the issue of human resources capability training, this research review recommend provision of array of opportunity for capability building and conducive working environment to promote productivity. Also worth considering, employee, employer relationship, Other variables such as attitude and productivity of employees, relationship between employees and employers, increase and decrease in financial assets should be taken into account.

  10. Human capital in nuclear industry

    International Nuclear Information System (INIS)

    Anon.

    2010-01-01

    On June 7, 2010, as part of the Atomexpo 2010 exhibition, a round-table discussion took place on the topic Human capital in the nuclear industry: challenges and solutions. The article summarizes reports made during the meeting. Tatiana Kozhevnikova, deputy director general of the Rosatom Corporation, made a report about the strategy and best human resource management practices in member companies of the Corporation. She briefly described the state of the human capital in the Russian nuclear industry and outlined the key provisions of the human resource management strategy. Attendees to the round-table discussion elaborated further on the key statements of the report. The discussion has given an evidence that the Russian nuclear industry is giving an enormous importance to human resource management and is firmly intended on successfully tacking the issues associated with the provision of sufficient staff for the industry's safe and efficient development [ru

  11. Private Equity Capital in a Less Developed Economy: Evidence, Issues and Perspectives

    Directory of Open Access Journals (Sweden)

    Melusi Mpofu

    2015-10-01

    Full Text Available This study investigates the structure of the private equity industry and issues that impact on its development and growth in Zimbabwe. Studies conducted internationally have unequivocally demonstrated the importance of private equity investments in assisting firms at start/growth phase and decline phase. However there is a dearth of literature on how these financial intermediaries assist in unlocking firm value from an emerging markets perspective. The study uses the document analysis and an exploratory research paradigms to achieve the stated objectives. The study finds that the venture capital industry in Zimbabwe mimics similar industries in other countries except that it is constrained by market liquidity. Lack of regulation and viable business sectors coupled with excessive risks in the political economy narrows the scope of private equity operations. Several issues impacting on the development of the private equity industry are identified and evaluated. The study has policy implications for the development of regulatory framework to bolster the growth of the private equity industry in emerging market economies. This study provides new evidence and policy suggestions on the operations of the private equity industry in a liquidity constrained and less developed economy.

  12. The impact of labour productivity on the Swedish construction industries

    OpenAIRE

    Forsberg, Azam

    2007-01-01

    There have been debates concerning what can be done about the current low labour productivity in the Swedish construction industries. High production cost in the construction industries has been a burning issue for a long time. On the other hand, process industries and organisations have taken the advantage of labour productivity measurement to reduce their production cost and eliminate non value-added activities. The purpose of this paper is to examine, why and how the process industries and...

  13. Environmental pollution of polybrominated diphenyl ethers from industrial plants in China: a preliminary investigation.

    Science.gov (United States)

    Deng, Chao; Chen, Yuan; Li, Jinhui; Li, Ying; Li, Huafen

    2016-04-01

    Although numerous studies have shown the presence of polybrominated diphenyl ethers (PBDEs) in various environmental media, attention to their distribution in the environmental media surrounding industrial facilities is limited. In this study, eight PBDEs congeners (BDE-28, -47, -99, -100, -153, -154, -183, -209) were investigated in surface soils and water samples collected from commercial PBDE manufacturers, flame-retardant plastic modification plants and waste electrical and electronic equipment recycling facilities in China. Analysis of target compounds was performed using the model NCI GC-MS in SIM mode. The concentrations of ∑8PBDEs varied from 193.1 to 22,004.3 ng/L in water samples and from 1209.3 to 226,906 ng/g dry wt in surface soils, respectively. More severe PBDE contamination, when compared with previously reported data, was found in industrial areas in this study. This indicates that these industrial areas are highly polluted with PBDEs. BDE-209 was the predominant congener, accounting for more than 94% in this study, except for a 68.75% portion at one site. Our results show that PBDE manufacturing and flame-retardant plastic modification plants, easily overlooked by the public, are two primary PBDE pollution sources although they affect surrounding areas. Further research is needed, aimed at managing industrial PBDE emissions and eliminating environmental PBDE pollution, to investigate the material flows and environmental fates of PBDEs in all stages of the life cycle.

  14. Calculating utility prudency issue costs

    International Nuclear Information System (INIS)

    Nielsen, K.R.

    1985-01-01

    The nuclear industry, particularly utilities and their construction, engineering and vendor agents, is faced with a surging increase in prudency management audits. What started as primarily a nuclear project-oriented requirement has spread to encompass most significant utility capital construction projects. Such audits are often a precedent condition to commencement of rate hearings. The cost engineer, a primary major capital construction project participant, is required to develop or critique ''prudency issue'' costs as part of such audits. Although utility costs in the broadest sense are potentially at issue, this paper concentrates on the typical project/construction management costs. The costs of design, procurement and construction are all subject to the calculation process

  15. Product waste in the automotive industry : Technology and environmental management

    NARCIS (Netherlands)

    Groenewegen, Peter; Hond, Frank Den

    1993-01-01

    In this article the changes in technology and industry structure forced by waste management in the automotive industry are explored. The analysis is based on (1) a characterisation of corporate response to environmental issues, and (2) the management of technology applied to the car manufacturing

  16. Burden of industrial waste and potential for recycling: technological, economic and environmental aspects

    Directory of Open Access Journals (Sweden)

    Mihajlović Ivan

    2017-07-01

    Full Text Available Many benefits resulting from the development of the heavy industry are, unfortunately, accompanied by many issues resulting from the process of generating the industrial waste. This manuscript is presenting the environmental consequences, resulting from long period of time of heavy industry production and exploring the possibilities to recycle some of the industrial waste generated during the period of more than one century of ore excavation and copper extraction in the region of Eastern Serbia, in the vicinity of city of Bor. First part of the manuscript is presenting the scope of environmental issues, resulting from the heavy industry in this region and the amounts and the structure of the industrial waste, generated in this area, as well as the influence of generated waste to the environment of the region. Second part of the manuscript is dealing with the potential to recycle and reuse some of this waste, analyzing technological, economic and environmental aspects at the same time. In the final segment of the paper, some practical examples will be addressed based on the research work conducted at both experimental and industrial level. Results presented in the manuscript are mostly collected during long term research of the project team from Technical faculty in Bor, University of Belgrade, in the field of environmental management. This way, this manuscript is based on review of the research papers authored or co-authored by the author of this work, dealing with water, soil and air pollution, published in leading international journals. Also, the manuscript is presenting the literature review of other international issues dealing with the environmental management issues in the vicinity of large industrial complexes. Parts of the research results, presented in this manuscript are financially supported by the Ministry of Education, Science and Technological development of Republic of Serbia, under the project TR34023.

  17. The partitioning and transmutation issue: an industrial point of view

    Energy Technology Data Exchange (ETDEWEB)

    Greneche, D. [Cogema, 78 - Saint Quentin en Yvelines (France); Rance, P.; Zimmerman, C. [BNFL, British Nuclear Fuels, Company Research Lab., Cumbria (United Kingdom)

    2001-07-01

    P and T is a set of technologies which are mostly at the research stage. However, it is considered that enough information is available at present in order to carry out a preliminary investigation of its potential industrialization. This paper considers P and T in terms of technological feasibility, cost, timing and environmental impact. The paper concludes that there are enough uncertainties in the benefits of P and T to warrant a comprehensive evaluation of its cost and socio-economic impact, and its impact on repository design and safety before pushing ahead with large-scale development programmes. (author)

  18. The partitioning and transmutation issue: an industrial point of view

    International Nuclear Information System (INIS)

    Greneche, D.; Rance, P.; Zimmerman, C.

    2001-01-01

    P and T is a set of technologies which are mostly at the research stage. However, it is considered that enough information is available at present in order to carry out a preliminary investigation of its potential industrialization. This paper considers P and T in terms of technological feasibility, cost, timing and environmental impact. The paper concludes that there are enough uncertainties in the benefits of P and T to warrant a comprehensive evaluation of its cost and socio-economic impact, and its impact on repository design and safety before pushing ahead with large-scale development programmes. (author)

  19. Training: Who Needs It? Research Report 1995. Key Issues for Providers.

    Science.gov (United States)

    Hotel and Catering Training Co., London (England).

    Aimed at all those involved in the supply of training and vocational education for the hospitality industry, this report summarizes findings of the research report, "Training Who Needs It?" It draws out and explores in more detail key issues relating to the provision of training, support, and related initiatives for the industry. Section…

  20. Psychosocial Studies of Migration and Community: Introduction to the Special Issue

    OpenAIRE

    Douglas D. Perkins; Neal A. Palmer; Manuel García-Ramírez

    2011-01-01

    Introducing the special issue on psychosocial studies of migration and community, we briefly reflect on the global increase in, and issues related to, both international and domestic migration, particularly from rural areas of less developed countries, which has fueled rapid urbanization and intercultural tensions in both post-industrial and developing countries. Topics covered in the issue are summarized, including an Italian study of the emotional impact of discrimination against immigrant ...

  1. The changing role of chemistry in the power industry

    International Nuclear Information System (INIS)

    Caris, N.B.

    2006-01-01

    Corrosion costs the U.S. electricity industry between five and ten billion dollars a year. In steam generating plants it is estimated that over half the forced outages are caused by corrosion, and in the U.S. industry, corrosion increases the cost of electricity more than it increases the cost of any other product, adding over 10% to its price. The total cost of corrosion to U.S. industry is in excess of dollar 276 billion annually, of which more than 30% could be prevented through the use of optimum corrosion management practices. In order to effectively deal with these issues it will require a coordinated approach throughout the industry, in which chemistry has a major role to play. Chemistry has effectively moved from being a problem to being a solution for materials and corrosion issues, and judging by the current advances and initiatives, will continue to do so. The window of opportunity to positively influence the entire industry is here. This will be especially challenging for us as chemists in Eskom, with an ageing fleet and lack of excess generating capacity. The spin-off of taking up this challenge to 'get our chemistry right' and take a quantum step forward would be a significant positive effect on the unit capability factor (UCF) and the forced loss rate (UCLF) for the Generation Division. This could, in turn, influence issues as far reaching as the cost of electricity for the South African consumer and when the construction of new generating plant is scheduled. (orig.)

  2. Policy issues of transporting spent nuclear fuel by rail

    International Nuclear Information System (INIS)

    Spraggins, H.B.

    1994-01-01

    The topic of this paper is safe and economical transportation of spent nuclear fuel by rail. The cost of safe movement given the liability consequences in the event of a rail accident involving such material is the core issue. Underlying this issue is the ability to access the risk probability of such an accident. The paper delineates how the rail industry and certain governmental agencies perceive and assess such important operational, safety, and economic issues. It also covers benefits and drawbacks of dedicated and regular train movement of such materials

  3. Transition-cost issues for a restructuring US electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Utilities regulators can use a variety of approaches to calculate transition costs. We categorized these approaches along three dimensions. The first dimension is the use of administrative vs. market procedures to value the assets in question. Administrative approaches use analytical techniques to estimate transition costs. Market valuation relies on the purchase price of particular assets to determine their market values. The second dimension concerns when the valuation is done, either before or after the restructuring of the electricity industry. The third dimension concerns the level of detail involved in the valuation, what is often called top-down vs. bottom-up valuation. This paper discusses estimation approaches, criteria to assess estimation methods, specific approaches to estimating transition costs, factors that affect transition-cost estimates, strategies to address transition costs, who should pay transition costs, and the integration of cost recovery with competitive markets.

  4. 26 CFR 1.103-10 - Exemption for certain small issues of industrial development bonds.

    Science.gov (United States)

    2010-04-01

    ... issuance of the issue in question on its books or records with respect to the issue. The term “books or... warehouse terminal in the same city at a cost of $250,000 and tractor-trailers and other automotive...

  5. Renewable energy 1998: Issues and trends

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report presents the following five papers: Renewable electricity purchases: History and recent developments; Transmission pricing issues for electricity generation from renewable resources; Analysis of geothermal heat pump manufacturers survey data; A view of the forest products industry from a wood energy perspective; and Wind energy developments: Incentives in selected countries. A glossary is included. 19 figs., 27 tabs.

  6. Water pollution: its management and control in the South African gold mining industry

    International Nuclear Information System (INIS)

    Pulles, W.

    1992-01-01

    The South African mining industry is subjected to pressure from the authorities, the media and the public regarding the impact of mining operations on the water environment. In order to respond to these developments the mining industry needs to have a good understanding of water quality management issues which apply to its operations. Important issues in this regard are discussed. 40 refs., 10 tabs., 2 figs

  7. Medical tourism in Iran: Issues and challenges

    Science.gov (United States)

    Jabbari, Alireza; Delgoshaei, Bahram; Mardani, Raja; Tabibi, Seid Jamaledin

    2012-01-01

    Introduction: Medical tourism is rapidly becoming a worldwide, multibillion-dollar industry. Iran has a high potential for this industry. The purpose of this study was to examine the medical tourism cluster, using Diamond Analysis tool. Materials and Methods: This study is a descriptive, analytical and qualitative one. Thirty professionals and researchers in this field were interviewed and official documents belonging to the Health ministry as well as tourism organization and finally related literature were examined. The data was analyzed using content analysis method. Results: Positive and negative parts of the medical tourism industry of Iran were determined according to diamond of advantage. Conclusion: The strategic issues were identified and a number of possible solutions for addressing them were recommended. More and effective public-private participations, aggressive marketing, improving infrastructures, and international accreditation of health care facilities and human resources development could improve medical tourism industry in the country. PMID:23555142

  8. Industry's Commercial Initiatives on ISS

    Science.gov (United States)

    Shields, C. E.; Kessler, C.; Lavitola, M. S.

    2002-01-01

    For more than ten years, private industry has worked to develop a commercial human space market and to create a sustainable ISS commercial utilization customer base. Before ISS assembly was underway - and long before NASA and the international space agencies began to craft ISS commercial business terms and conditions - industry planted and nurtured the seeds of interest in exploiting human space utilization for commerce. These early initiatives have yielded the impetus and framework for industry approaches to ISS commercial utilization today and for NASA's and the International Partners' planned accommodation of private sector interests and desires on the ISS. This paper chronicles major industry initiatives for commercial ISS utilization, emphasizing successful marketing and business approaches and why these approaches have a higher likelihood of success than others. It provides an overview of individual companies' initiatives, as well as collaborative efforts that cross company lines and country borders; and it assesses the relative success of each. Rather than emphasize negative issues and barriers, this paper characterizes and prioritizes actionable success factors for industry and government to make ISS commercial utilization a sustainable reality.

  9. Infrastructure Requirements for an Expanded Fuel Ethanol Industry

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, Robert E. [Downstream Alternatives, Inc., South Bend, IN (United States)

    2002-01-15

    This report provides technical information specifically related to ethanol transportation, distribution, and marketing issues. This report required analysis of the infrastructure requirements for an expanded ethanol industry.

  10. Deliberations on nuclear safety regulatory system in a changing industrial environment

    International Nuclear Information System (INIS)

    Kim, H.J.

    2001-01-01

    Nuclear safety concern, which may accompany such external environmental factors as privatization and restructuring of the electric power industry, is emerging as an international issue. In order to cope with the concern about nuclear safety, it is important to feedback valuable experiences of advanced countries that restructured their electric power industries earlier and further to reflect the current safety issues, which are raised internationally, fully into the nuclear safety regulatory system. This paper is to review the safety issues that might take place in the process of increasing competition in the nuclear power industry, and further to present a basic direction and effective measures for ensuring nuclear safety in response thereto from the viewpoint of safety regulation. It includes a political direction for a regulatory body's efforts to rationalize and enforce efficiently its regulation. It proposes to ensure that regulatory specialty and regulatory cost are stably secured. Also, this paper proposes maintaining a sound nuclear safety regulatory system to monitor thoroughly the safety management activities of the industry, which might be neglected as a result of focusing on reduction of the cost for producing electric power. (author)

  11. The coal industry and its greenhouse challenge

    International Nuclear Information System (INIS)

    Armstrong, A.

    1998-01-01

    The Australian coal industry is actively involved in greenhouse gas emission management and abatement issues. An Australian Coal Association (ACA) position paper on greenhouse in November 1989, recommended a number of strategies to minimise the greenhouse effect, including the enhancement of energy utilisation efficiency, improved energy conversion efficiency at coal-fired power stations, expanded use of solar heating, and improved recycling. All of the strategies have been implemented to various degrees. The management and abatement of greenhouse gas emissions within the coal industry has been approached from an individual operational level, and a 'higher' industry level

  12. Interfacing industrial process control systems to LEP/LHC

    International Nuclear Information System (INIS)

    Rabany, M.

    1992-01-01

    Modern industrial process control systems have developed to meet the needs of industry to increase the production while decreasing the costs. Although particle accelerators designers have pioneered in control systems during the seventies, it has now become possible to them to profit of industrial solutions in substitution of, or in complement with the more traditional home made ones. Adapting and integrating such industrial systems to the accelerator control area will certainly benefit to the field in terms of finance, human resources and technical facilities offered off-the-shelf by the widely experienced industrial controls community; however this cannot be done without slightly affecting the overall accelerator control architecture. The paper briefly describes the industrial controls arena and takes example on an industrial process control system recently installed at CERN to discuss in detail the related choices and issues. (author)

  13. Nuclear power in the OECD countries results and current issues

    International Nuclear Information System (INIS)

    Jones, C.F.

    1989-01-01

    The first use of nuclear power for the generation of electricity on a commercial scale occurred in the United Kingdom in 1956. Today, 13 OECD countries have 318 nuclear units in operation and 66 more in construction or on order. This outstanding achievement is the result of the successful organization, start up, and operation of an industry to design, build, equip, fuel, and maintain these facilites. Nuclear power, however, is currently troubled by a number of issues that may impair its ability to reach its full potential. The industry has acknowledged problems that can be and are being managed. But the industry also has a number of political difficulties that could be beyond its ability to resolve with its own resources. These are issues common to the introduction of new technologies into a complex world. Nevertheless, nuclear power continues to be the means by which we can provide the electric power needed to raise the living standard of everyone on the globe

  14. Key Issues in Global Technological Innovation Projects

    Directory of Open Access Journals (Sweden)

    Roberto Sbragia

    2012-04-01

    Full Text Available This article aimed to identify those issues that were present in global technological innovation projects carried out by Brazilian multinational companies and which performance criterions these undertakings met. We investigated 36 global technological innovation projects from Brazilian multinational enterprises through a web-survey. Findings show that these companies went beyond the traditional iron triangle to evaluate their technological efforts and considered additional performance dimensions such as customer satisfaction, business results, and preparation for the future. Results also show high degree of presence for issues emerging from the industry, moderate degree of presence for issues emerging from both the project and R&D activities, and low degree of presence for issues emerging from the headquarters, the subsidiaries, and the external environment. Further research is needed to find out if and how these issues influenced the performance of the global technological innovation projects studied.DOI:10.5585/gep.v3i1.72

  15. The Asian petrochemical industry

    International Nuclear Information System (INIS)

    Selwa, Christopher.

    1996-03-01

    The Asian Petrochemical Industry brings you up to date with the latest developments in this dynamic region and covers all the key issues, giving detailed analysis and comment on: the general economic outlook; demand and production trends for basic petrochemicals and specialities in individual countries; political stability and how with affects growth and investment opportunities; security of supply; the import of petrochemicals and the aim of the region to become a net exporter by 2000; capacity increases - the relative merits of new plant construction versus expanding existing plants; the financing of petrochemical projects; the use of appropriate projects; the use of appropriate technology and patent provision in the Gatt treaty; increasing environmental concerns and the 'responsible care' initiative. The Asian Petrochemical Industry presents an overview of each Asian player in the petrochemical and associated industries, comparing and contrasting the countries within the region. (Author)

  16. Emerging Environmental Justice Issues in Nuclear Power and Radioactive Contamination

    Directory of Open Access Journals (Sweden)

    Dean Kyne

    2016-07-01

    Full Text Available Nuclear hazards, linked to both U.S. weapons programs and civilian nuclear power, pose substantial environment justice issues. Nuclear power plant (NPP reactors produce low-level ionizing radiation, high level nuclear waste, and are subject to catastrophic contamination events. Justice concerns include plant locations and the large potentially exposed populations, as well as issues in siting, nuclear safety, and barriers to public participation. Other justice issues relate to extensive contamination in the U.S. nuclear weapons complex, and the mining and processing industries that have supported it. To approach the topic, first we discuss distributional justice issues of NPP sites in the U.S. and related procedural injustices in siting, operation, and emergency preparedness. Then we discuss justice concerns involving the U.S. nuclear weapons complex and the ways that uranium mining, processing, and weapons development have affected those living downwind, including a substantial American Indian population. Next we examine the problem of high-level nuclear waste and the risk implications of the lack of secure long-term storage. The handling and deposition of toxic nuclear wastes pose new transgenerational justice issues of unprecedented duration, in comparison to any other industry. Finally, we discuss the persistent risks of nuclear technologies and renewable energy alternatives.

  17. Emerging Environmental Justice Issues in Nuclear Power and Radioactive Contamination.

    Science.gov (United States)

    Kyne, Dean; Bolin, Bob

    2016-07-12

    Nuclear hazards, linked to both U.S. weapons programs and civilian nuclear power, pose substantial environment justice issues. Nuclear power plant (NPP) reactors produce low-level ionizing radiation, high level nuclear waste, and are subject to catastrophic contamination events. Justice concerns include plant locations and the large potentially exposed populations, as well as issues in siting, nuclear safety, and barriers to public participation. Other justice issues relate to extensive contamination in the U.S. nuclear weapons complex, and the mining and processing industries that have supported it. To approach the topic, first we discuss distributional justice issues of NPP sites in the U.S. and related procedural injustices in siting, operation, and emergency preparedness. Then we discuss justice concerns involving the U.S. nuclear weapons complex and the ways that uranium mining, processing, and weapons development have affected those living downwind, including a substantial American Indian population. Next we examine the problem of high-level nuclear waste and the risk implications of the lack of secure long-term storage. The handling and deposition of toxic nuclear wastes pose new transgenerational justice issues of unprecedented duration, in comparison to any other industry. Finally, we discuss the persistent risks of nuclear technologies and renewable energy alternatives.

  18. Application of Actuarial Modelling in Insurance Industry

    OpenAIRE

    Burcã Ana-Maria; Bãtrînca Ghiorghe

    2011-01-01

    In insurance industry, the financial stability of insurance companies represents an issue of vital importance. In order to maintain the financial stability and meet minimum regulatory requirements, actuaries apply actuarial modeling. Modeling has been at the center of actuarial science and of all the sciences from the beginning of their journey. In insurance industry, actuarial modeling creates a framework that allows actuaries to identify, understand, quantify and manage a wide range of risk...

  19. Petroleum 1996 - issues and trends

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    Increasingly, users of the Energy Information Administration`s petroleum data and analytical reports have expressed an interest in a recurring report that takes a broad view of the petroleum sector. What is sought is some perspective on the complex interrelationships that comprise an industry and markets accounting for 40 percent of the energy consumed in the United States and ranging from the drilling rig in the oil field to the pump at the local gasoline station. This report comprehensively examines historical trends, and selectively focuses on major issues and the events they represent. It analyzes different dimensions of the industry and related markets in terms of how they relate to a common theme, in this case, the volatility in petroleum markets.

  20. Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges

    Science.gov (United States)

    Chen, Yuanfang; Lee, Gyu Myoung; Shu, Lei; Crespi, Noel

    2016-01-01

    The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases) is an important research issue in the industrial applications of the Internet of Things (IoT). An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices) dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI) framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well. PMID:26861345

  1. Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges.

    Science.gov (United States)

    Chen, Yuanfang; Lee, Gyu Myoung; Shu, Lei; Crespi, Noel

    2016-02-06

    The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases) is an important research issue in the industrial applications of the Internet of Things (IoT). An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices) dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI) framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well.

  2. Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges

    Directory of Open Access Journals (Sweden)

    Yuanfang Chen

    2016-02-01

    Full Text Available The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases is an important research issue in the industrial applications of the Internet of Things (IoT. An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well.

  3. International divestment and restructuring decisions (with special reference to the motor industry).

    OpenAIRE

    Casson M

    1986-01-01

    ILO pub. Working paper on specific industry restructuring and plant shutdown in the motor vehicle industry in Western Europe - discusses industrial policy issues, enterprise level decision making, production, management, marketing, and the need for rationalization and economies of scale; includes a case study of Peugeot's acquisition of Chrysler. Bibliography, statistical tables.

  4. Current situation and future prospects for the Australian beef industry.

    Science.gov (United States)

    Greenwood, Paul Leo; Ferguson, Drewe M

    2018-04-12

    Beef production extends over almost half of Australia, with about 47,000 cattle producers that contribute about 20% ($A12.7 billion GVP) of the total value of farm production in Australia. Australia is one of the world's most efficient producers of cattle and was the world's third largest beef exporter in 2016. The Australian beef industry had 25 million head of cattle in 2016-17, with a national beef breeding herd of 11.5 million head. Australian beef production includes pasture based cow-calf systems, a backgrounding or grow-out period on pasture, and feedlot or pasture finishing. Feedlot finishing has assumed more importance in recent years to assure the eating quality of beef entering the relatively small Australian domestic market, and to enhance the supply of higher value beef for export markets. Maintenance of Australia's preferred status as a quality assured supplier of high value beef produced under environmentally sustainable systems from 'disease-free' cattle is of highest importance. Stringent livestock and meat quality regulations and quality assurance systems, and productivity growth and efficiency across the supply chain to ensure price competiveness, are crucial for continued export market growth in the face of increasing competition. Major industry issues, that also represent research, development and adoption priorities and opportunities for the Australian beef industry have been captured within exhaustive strategic planning processes by the red meat and beef industries. At the broadest level, these issues include consumer and industry support, market growth and diversification, supply chain efficiency, productivity and profitability, environmental sustainability, and animal health and welfare. This review provides an overview of the Australian beef industry including current market trends and future prospects, and major issues and opportunities for the continued growth, development and profitability of the industry.

  5. Guide to the economic regulation of the electricity industry

    International Nuclear Information System (INIS)

    Brough, M.; Lobban, S.

    1995-09-01

    This document is the fist edition of OXERA's Guide to the Economic Regulation of the Electricity Industry in the UK. It is primarily intended as a work of reference, summarising the key statutory controls of the industry and the most important features of the companies' licences. The main features of the guide are as follows. It provides comprehensive coverage of the institutional and legal framework which defines the regulation of the industry. The roles of the key players are explained and a condensed account of all the relevant legal documents is given. It aims to bring the reader up to date with current regulatory issues and possible developments in the industry. It presents the information in a clear and concise form. The emphasis is on identifying and highlighting the key points in each area so that readers can rapidly familiarise themselves with the subject matter. It does not examine the process by which businesses are valued and the various price caps are set. These are issues which are best approached within the context of utility regulation in general. (author)

  6. International trade and waste and fuel managment issue, 2007

    Energy Technology Data Exchange (ETDEWEB)

    Agnihotri, Newal (ed.)

    2007-01-15

    The focus of the January-February issue is on international trade and waste and fuel managment. Major articles/reports in this issue include: New plants with high safety and availability, by Bill Poirier, Westinghouse Electric Company; Increased reliability and competitiveness, by Russell E. Stachowski, GE Energy, Nuclear; Fuel for long-term supply of nuclear power, by Kumiaki Moriya, Hitachi, Ltd., Japan; Super high burnup fuel, By Noboru Itagaki and Tamotsu Murata, Nuclear Fuel Industries LTD., Japan; Zero fuel failures by 2010, by Tom Patten, AREVA NP Inc.; Decommissioning opportunities in the UK, by David Brown and William Thorn, US Department of Commerce; Industry's three challenges, by Dale E. Klein, US Nuclear Regulatory Commission; and, A step ahead of the current ABWR's, compiled by Claire Zurek, GE Energy.

  7. The status of ISI in the UK nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Bann, T.; Rogerson, A. [AEA Technology, Risley (United Kingdom). Nuclear NDE Services

    1999-08-01

    This paper reviews the status of in-service inspection (ISI) in UK nuclear power generation industry through the experience of its nuclear utilities. The paper is intended to be a summary of some of the most recent and relevant ISI issues facing the utilities and the solutions devised to address those issues. (orig.)

  8. Institutional contexts of market power in the electricity industry

    International Nuclear Information System (INIS)

    Foer, A.A.

    1999-01-01

    Market power is widely recognized as one of the principal issues that must be dealt with if the electricity industry is to make the transition from regulation to competition. In this article, the author provides a legal and economic introduction to what the antitrust community means by market power and offers a primer on why market power is so central an issue in the electricity industry. Finally and most importantly, he offers comments on the institutional contexts of market power, exploring a process which he calls Shermanization that helps explain the institutional aspect of moving from regulation to competition and holds implications for where oversight should reside during this complex transition

  9. Autonomous Industrial Mobile Manipulation (AIMM)

    DEFF Research Database (Denmark)

    Hvilshøj, Mads; Bøgh, Simon; Nielsen, Oluf Skov

    2012-01-01

    Purpose - The purpose of this paper is to provide a review of the interdisciplinary research field Autonomous Industrial Mobile Manipulation (AIMM), with an emphasis on physical implementations and applications. Design/methodology/approach - Following an introduction to AIMM, this paper investiga......Purpose - The purpose of this paper is to provide a review of the interdisciplinary research field Autonomous Industrial Mobile Manipulation (AIMM), with an emphasis on physical implementations and applications. Design/methodology/approach - Following an introduction to AIMM, this paper......; sustainability, configuration, adaptation, autonomy, positioning, manipulation and grasping, robot-robot interaction, human-robot interaction, process quality, dependability, and physical properties. Findings - The concise yet comprehensive review provides both researchers (academia) and practitioners (industry......) with a quick and gentle overview of AIMM. Furthermore, the paper identifies key open issues and promising research directions to realize real-world integration and maturation of the AIMM technology. Originality/value - This paper reviews the interdisciplinary research field Autonomous Industrial Mobile...

  10. New job offers in the hotel industry and issue of recruitment

    OpenAIRE

    Kraliková, Klára

    2014-01-01

    The work follows the new trend of job offers in the hotel industry. The aim is to provide a comprehensive summary of selected new professional positions and put them into the context of hotel organization, and to analyze the current requirements for the position of Revenue Manager. The information obtained by monitoring the current job at the advertising portals and by an interview with a human recources officer of 5 * Prague hotel.

  11. Fitness for duty in the nuclear industry: Update of the technical issues 1996

    International Nuclear Information System (INIS)

    Durbin, N.; Grant, T.

    1996-05-01

    The purpose of this report is to provide an update of information on the technical issues surrounding the creation, implementation, and maintenance of fitness-for-duty (FFD) policies and programs. It has been prepared as a resource for Nuclear Regulatory Commission (NRC) and nuclear power plant personnel who deal with FFD programs. It contains a general overview and update on the technical issues that the NRC considered prior to the publication of its original FFD rule and the revisions to that rule (presented in earlier NUREG/CRs). It also includes chapters that address issues about which there is growing concern and/or about which there have been substantial changes since NUREG/CR-5784 was published. Although this report is intended to support the NRC's rule making on fitness for duty, the conclusions of the authors of this report are their own and do not necessarily represent the opinions of the NRC

  12. The Competitive status of the U.S. civil aviation manufacturing industry: a study of the influences of technology in determining international industrial competitive advantage

    National Research Council Canada - National Science Library

    Seitz, Frederick; Steele, Lowell W

    1985-01-01

    ... A Study of the Influences of Technology in Determining International Industrial Competitive Advantage Prepared by the U.S. Civil Aviation Manufacturing Industry Panel, Committee on Technology and International Economic and Trade Issues of the Office of the Foreign Secretary, National Academy of Engineering and the Commission on Engineering and Techni...

  13. Proceedings of a forum industry-university relations: collision or cooperation

    Energy Technology Data Exchange (ETDEWEB)

    1982-06-01

    The principal objective of the Forum was to gather individuals intimately involved or concerned with the national status of industry-university relations in order to develop a state-of-the-art consensus on the issues, problems and forms of these relationships. The program and schedule of the Forum are included in Appendix A. The agenda approached the Forum objective by scheduling an initial day of discussions on selected issues (Communication Barriers, Ethical Considerations, Bypassing the System, and Industrial Security and Restraint of Trade). This was followed by a morning session devoted to an examination of existing models representing the major alternative mechanisms currently utilized in formalized university-industry interactions. Each session was initiated by a general review statement presented by an appropriate Topic Leader. The Topic Leaders are listed in Appendix B.

  14. Critical issues in Investment, Production and Marketing of Moringa ...

    African Journals Online (AJOL)

    Critical issues in Investment, Production and Marketing of Moringa oleifera as an ... to enhance its large scale production, processing, marketing and investment as an industrial raw material in Nigeria. ... EMAIL FULL TEXT EMAIL FULL TEXT

  15. 76 FR 48047 - Airworthiness Directives; Diamond Aircraft Industries Powered Sailplanes

    Science.gov (United States)

    2011-08-08

    ... 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this... Service Information Diamond Aircraft Industries GmbH has issued Service Bulletin No. MSB 36-105/1, dated...-105, dated April 21, 2011, as specified in Diamond Aircraft Industries GmbH Service Bulletin No. MSB...

  16. Application of VR and HF technologies for improving industrial safety

    NARCIS (Netherlands)

    Loupos, K.; Christopoulos, D.; Vezzadini, L.; Hoekstra, W.; Salem, W.; Chung, P.W.H.

    2007-01-01

    Safety in industrial environments can nowadays be regarded as an issue of major importance. Large amounts of money are spent by industries on this matter in order to improve safety in all levels, by reducing risks of causing damages to equipment, human injuries or even fatalities. Virtual Reality

  17. Optimizing inventory management in the insulation manufacturing industry

    DEFF Research Database (Denmark)

    Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

    2016-01-01

    Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between...... service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. This paper contributes with empirical research within operations management in a sector which has not been...

  18. 75 FR 67639 - Airworthiness Directives; Piaggio Aero Industries S.p.A Model PIAGGIO P-180 Airplanes

    Science.gov (United States)

    2010-11-03

    ... Friday, except Federal holidays. For service information identified in this proposed AD, contact Piaggio... Piaggio Aero Industries have issued service information (referred to after this as ``the MCAI''), to... Information Piaggio Aero Industries S.p.A. has issued Service Bulletin (Mandatory) N.: SB 80-0275, Rev. N. 0...

  19. Proceedings of the 11. annual mining industry learning seminar : 2006 equipment evolutions

    Energy Technology Data Exchange (ETDEWEB)

    Joseph, T. [Alberta Univ., Edmonton, AB (Canada). School of Mining and Petroleum Engineering] (comp.)

    2006-07-01

    This seminar provided a forum for mine engineers, geologists, operators, vendors and academics to discuss various topics on equipment evolution that address mining industry concerns. Participants included those who are involved in mine planning, equipment selection, operations and maintenance. The presentations identified possible solutions to ongoing issues and alternative technologies emerging in the mining industry. Operators and original equipment manufacturers shared their innovations in novel developments and presented solutions to issues relevant to mining processes including truck and shovel technology issues such as tires, lube and fuel emissions. The seminar featured 17 presentations, of which 5 have been catalogued separately for inclusion in this database. tabs., figs.

  20. Environmental assessment: Industry perspective

    International Nuclear Information System (INIS)

    Meadley, T.

    1994-01-01

    The Canadian mining industry supports the concept of environmental assessment, but the current process at the time of the conference had a number of problems that the industry felt should be addressed. The author makes the following suggestions: that the process for individual projects should be separated from policy issues; that panel members should be drawn from a full-time staff; that there should be better referral criteria to determine which projects require full scale assessment including public hearings; that either the government or project opponents should participate but not both; that the financial burden on proponents should be reduced; that funding of intervenors should be controlled; that there should be a definite time frame

  1. Report on the Current Technical Issues on ASME Nuclear Code and Standard

    International Nuclear Information System (INIS)

    Koo, Gyeong Hoi; Lee, B. S.; Yoo, S. H.

    2008-11-01

    This report describes the analysis on the current revision movement related to the mechanical design issues of the U.S ASME nuclear code and standard. ASME nuclear mechanical design in this report is composed of the nuclear material, primary system, secondary system and high temperature reactor. This report includes the countermeasures based on the ASME Code meeting for current issues of each major field. KAMC(ASME Mirror Committee) of this project is willing to reflect a standpoint of the domestic nuclear industry on ASME nuclear mechanical design and play a technical bridge role for the domestic nuclear industry in ASME Codes application

  2. The role of industry in fusion

    International Nuclear Information System (INIS)

    Forsen, H.K.; Fowler, T.K.; Mariscalco, J.A.; Reichle, F.C.

    1985-01-01

    Bechtel National, Inc. comments on the principle objective of the national fusion program as being the development of fusion as a potential new energy source option. It is also discussed that industry needs a clearer statement of fusion program goals and approximate timing from the DOE, in order to properly assess corporate priorities and commitment to the principle objective. The Lawrence Livermore National Laboratory discusses the idea of ''partnership'', which addresses the issue of industry's role in the fusion program. TRW specifies a need for budget realities and the administrations's science and energy policies as outlined by the DOE's Office of Fusion Energy. Ebasco Services, Inc. expands on the idea of fully involving industry in the fusion energy program. At the Plasma Physics Laboratory, further comments are made on the need for industry's participation in the fusion energy program

  3. Self-regulation in the mining industry

    DEFF Research Database (Denmark)

    Sinding, Knud; Peck, Philip

    2013-01-01

    Many industries have established their own systems for self-regulation. They often do so when companies involved in the industry operate in countries where financial, technical, environmental and social regulation is weak and when the industry is challenged by legitimacy issues related to behaviour...... in one of these areas. One industry that has progressed unevenly down the road of self-regulation in these areas is mining. Developing self-regulation for mines and mining companies involves difficult questions of scope, rules, membership, assessment criteria and performance evaluation. While self-regulation...... may bring benefits to members, they are likely to take a long time coming; but when they do arrive they may be substantial. Using a range of theoretical and empirical results from research on self-regulation, performance rating and corporate strategy, this paper analyses the strategic and operational...

  4. Photovoltaic procurement strategies: an assessment of supply issues

    Energy Technology Data Exchange (ETDEWEB)

    Posner, D.; Costello, D.

    1980-02-01

    This review report presents the results of an analysis of alternative approaches to the design of a federal photovoltaics procurement program. Advantages and disadvantages of large purchases at fixed prices and smaller purchases for testing and demonstrating the technology are presented. The objectives and possible impacts of these purchase programs on the photovoltaic industry are described. The reactions of the industry to alternative purchase programs were assessed using personal interviews with selected companies currently active in photovoltaics. The report begins with a review of the impacts of federal procurements on other innovations, including the electronics industry, and suggests the relation of these procurements to photovoltaics. The methodology for conducting the interviews is presented next. The results of the interviews are summarized into possible scenarios of future developments in the industry and into discussions of key issues in the design of a procurement program. An appendix on the current structure of the photovoltaic industry is provided.

  5. 77 FR 65503 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

    Science.gov (United States)

    2012-10-29

    ... through Friday, except Federal holidays. For service information identified in this proposed AD, contact.... Prompted by the reported event, Diamond Aircraft Industries (DAI) published Recommended Service Bulletin... MCAI in the AD docket. Relevant Service Information Diamond Aircraft Industries GmbH has issued the...

  6. Recent Movement, Issues and Some Counter plans in Nuclear Industry

    International Nuclear Information System (INIS)

    Lee, S. K.; Lee, J. K.; Cho, C. S.; Lee, C. C.; Park, C. O.

    2007-01-01

    There is no doubt 'Nuclear Energy' is the only source that can ensure the world's steady development in the foreseeable future. Nowadays is definitely what is called 'renaissance of nuclear.' As energy demand and economy increase, and global climate warms, the trend of nuclear dependency will be accelerated further. With 30 reactors being built around the world today, another 35 or more planned to come online during the next 10 years, and over two hundred further back in the pipeline, the global nuclear industry is clearly going forward strongly. Countries are seeking to replace old reactors as well as expand capacity, and an additional 25 countries are either considering or have already decided to make nuclear energy part of their power generation capacity. On the other hand, as current movement of world nuclear field, Korea has faced to one of the most important times since introducing nuclear power. Twenty nuclear power plants are run in Korea i.e. sixteen PWRs and four PHWRs now, and the capability of nuclear power production has been ranked world number six. In spite of this grand appearance, however, the influencing power on world nuclear society is not well matched to its status since it does not have a special hidden card which can appeal and impact on international community. In the era of nuclear renaissance, paradoxically, Korea is not in the situations of optimistic or pessimistic view. Now let's As energy demand and economy increase, and global climate warms, the trend of nuclear dependency will be accelerated further. With 30 reactors being built around the world today, another 35 or more planned to come online during the next 10 years, and over two hundred further back in the pipeline, the global nuclear industry is clearly going forward strongly. Countries are seeking to replace old reactors as well as expand capacity, and an additional 25 countries are either considering or have already decided to make nuclear energy part of their power generation

  7. Engaging service providers in improving industry performance

    International Nuclear Information System (INIS)

    Oberth, R.

    2012-01-01

    Effective task leadership is the key to achieving results in the nuclear industry and in most other industries. One of the themes of this conference is to discuss how the nuclear industry can undertake Issue-Identification and Definition as a means of 'identifying what needs attention' and then 'defining what needs to be done to make that happen'. I will explore this theme from the perspective of the 'Service Provider' - which by the definition of this conference includes everyone not within an operating utility - meaning 'those involved in everything from inspection and repair to research and plant architecture' - basically the member companies of my association, OCI. Our members take the definition of the roles and responsibilities of the 'Service Provider' community very seriously. In the context of this discussion a key utility function is the early definition of requirements and expectations of Service Providers in supplying to these requirements. Let's explore for a moment the Service Provider role and perspective. Service Providers are by nature pro-active - they seek ways to engage with utilities (and tier one vendors) to solve problems and achieve good outcomes. They come to industry conferences like this one to learn about upcoming utility programs and supply opportunities and how they can improve performance. Service Providers particularly want to hear senior utility people comment on emerging issues even those at the very early identification stage. Some Clarification of Roles is in Order - as that is the focus of this conference: 'Issue-Identification and Definition'. 'Issue-Identification' is the utility's job - it is the utility's role to identify as early as possible 'what needs attention and what their needs and expectations are'. This takes place before service provider engagement. 'Issue-Definition' is more challenging. It means 'determining and prioritizing what needs to be done to deal with the situation at hand'. This typically involves

  8. In defense of industry-physician relationships.

    Science.gov (United States)

    Nakayama, Don K

    2010-09-01

    The objective was to examine the economic, ethical, and legal foundations for conflict of interest restrictions between physicians and pharmaceutical and medical device industries ("industry"). Recently academic medical centers and professional organizations have adopted policies that restrict permissible interactions between industry and physicians. The motive is to avoid financial conflicts of interest that compromise core values of altruism and fiduciary relationships. Productive relationships between industry and physicians provide novel drugs and devices of immense benefit to society. The issues are opposing views of medical economics, profit motives, medical professionalism, and extent to which interactions should be lawfully restricted. Industry goals are congruent with those of physicians: patient welfare, safety, and running a profitable business. Profits are necessary to develop drugs and devices. Physician collaborators invent products, refine them, and provide feedback and so are appropriately paid. Marketing is necessary to bring approved products to patients. Economic realities limit the extent to which physicians treat their patients altruistically and as fiduciaries. Providing excellent service to patients may be a more realistic standard. Statements from industry and the American College of Surgeons appropriately guide professional behavior. Preservation of industry-physician relationships is vital to maintain medical innovation and progress.

  9. Issues in the management of low-level radioactive wastes

    International Nuclear Information System (INIS)

    Ashbrook, A.W.

    1984-01-01

    All industry finds itself today enmeshed in a morass of regulation, political apathy and public antagonism when it comes to hazardous industrial waste. Our industry is a world-class leader on all three fronts. There are no disposal facilities in Canada for radioactive wastes and the prognosis for the future is bleak. As the industry gets older, more and more facilities will be closed and require decommissioning. New facilities require plans for the long-term management of their wastes. Indeed, one major public issue with the nuclear industry is the fate of the wastes produced. In looking at the situation in which we find ourselves today with respect to the long-term management of naturally-occurring low-level radioactive wastes, one must wonder where we are going in the future, and whether indeed is an end in sight

  10. Research on Strategic Issues of Strategic Alliance on Industrial Technology Innovation%产业技术创新战略联盟战略问题研究

    Institute of Scientific and Technical Information of China (English)

    胡争光; 南剑飞

    2011-01-01

    The strategic alliance on industry technological innovation is a new emerging thing in China.It is the development of R&D strategic alliances in the industry level, and it has particular characteristic and mission.There are several strategic issues that should be noted to build strategic alliance on industry technological innovation, such as building the Strategic Golden Triangle in its network, building the mechanism of interest sharing and risk sharing on strategic alliance.%在我国,产业技术创新战略联盟是一个新生事物,是具有产业特征的技术研发联盟.产业技术创新战略联盟具有特定的特征和使命.构建产业技术创新战略联盟,应注意构建产业技术创新战略联盟网络中的战略金三角、联盟成果的分享机制和联盟风险分担机制等几个战略问题.

  11. Fitness for duty in the nuclear industry: Update of the technical issues 1996

    Energy Technology Data Exchange (ETDEWEB)

    Durbin, N.; Grant, T. [eds.] [Battelle Seattle Research Center, WA (United States)

    1996-05-01

    The purpose of this report is to provide an update of information on the technical issues surrounding the creation, implementation, and maintenance of fitness-for-duty (FFD) policies and programs. It has been prepared as a resource for Nuclear Regulatory Commission (NRC) and nuclear power plant personnel who deal with FFD programs. It contains a general overview and update on the technical issues that the NRC considered prior to the publication of its original FFD rule and the revisions to that rule (presented in earlier NUREG/CRs). It also includes chapters that address issues about which there is growing concern and/or about which there have been substantial changes since NUREG/CR-5784 was published. Although this report is intended to support the NRC`s rule making on fitness for duty, the conclusions of the authors of this report are their own and do not necessarily represent the opinions of the NRC.

  12. Supply chain strategies, issues and models

    CERN Document Server

    Ramanathan, Ramakrishnan

    2014-01-01

    In the 21st century, supply chain operations and relationships among supply chain partners have become highly challenging, necessitating new approaches, e.g., the development of new models. Supply Chain Strategies, Issues and Models discusses supply chain issues and models with examples from actual industrial cases. Expert authors with a wide spectrum of knowledge working in various areas of supply chain management from various geographical locations offer refreshing, novel and insightful ideas and address possible solutions using established theories and models. Supply Chain Strategies, Issues and Models features studies that have used mathematical modeling, statistical analyses and also descriptive qualitative studies. The chapters cover many relevant themes related to supply chains and logistics including supply chain complexity, information sharing, quality (six sigma), electronic Kanbans, inventory models, scheduling, purchasing and contracts. To facilitate easy reading, the chapters that deal with suppl...

  13. The voice of Canada's oil and natural gas industry : oil and natural gas

    International Nuclear Information System (INIS)

    2001-04-01

    The Canadian Association of Petroleum Producers (CAPP) represents 150 members of the oil and gas industry, which together are responsible for approximately 95 per cent of the oil and natural gas produced in Canada. The upstream sector comprises companies that explore for, develop and produce petroleum resources, while the downstream sector involves companies that refine and market the resources. CAPP works closely with governments of 11 of Canada's 13 provinces and territories and with public groups to represent upstream producers active across the country. The enhancement of the economic well-being and sustainability of the upstream petroleum industry is the mission of the CAPP. The main priorities of the CAPP are: Environment, Health and Safety Stewardship, reasonable and timely access to resources, competitiveness of the Canadian industry on a global basis, the secure and efficient access to markets, and open and constructive public, government and media affairs. Some of the issues dealt with by the CAPP are sour gas, flaring, venting and industry-landowner relations, improved safety performance, federal issues such as corporate taxes and environmental issues, Aboriginal and First Nations issues, transportation costs for natural gas on major pipelines, and oil and sands bitumen issues, to name a few. The board of the CAPP is made up of 32 members. The work is carried out by hundreds of volunteers from member companies who provide their time and expertise for various committees and working groups, as well as a staff of approximately 40 people to assist them. The members provide the entire funding for CAPP, which is located in Calgary, Alberta. The document concluded with a few facts concerning the petroleum industry in general. 12 figs

  14. Industrial ecology Prosperity Game{trademark}

    Energy Technology Data Exchange (ETDEWEB)

    Beck, D.; Boyack, K.; Berman, M.

    1998-03-01

    Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the system boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.

  15. Proceedings of the 6. international symposium on waste processing and recycling in the mineral and metallurgical industries : WALSIM : water, air and land sustainability issues in mineral and metal extraction

    International Nuclear Information System (INIS)

    Jia, C.Q.; Pickles, C.A.; Brienne, S.; Rao, S.R.

    2008-01-01

    The proceedings of the 2008 conference of metallurgists of CIM includes a collection 7 separate symposia, namely (1) aerospace materials and manufacturing, (2) water, air and land sustainability issues in mineral and metal extraction (WALSIM), (3) current status and future trends of functional nanometers, (4) recent developments in advanced high strength steels processing, (5) corrosion and wear of materials, (6) advanced characterization techniques applied to mineral, metals and materials, and (7) management in metallurgy. The WALSIM symposium dealt with environmental issues, with particular reference to the three topics of water, air and land sustainability associated with mineral and metal extraction, processing and fabrication. It provided an opportunity for scientists, engineers and plant operators to report on work aimed at achieving more efficient, environmentally sound and sustainable performance of the mineral and metals industry by enabling related organizations to exchange information on the latest developments in this field of activity with considerations of both industry and society. The sessions were entitled: resource recovery from waste material; by-products processing of slag, fly ash and electric arc furnace dust; metal recycling; wastewater and effluent treatment; gaseous pollutants treatment; and, sustainability and basic research. The symposium featured 43 presentations, of which 17 have been catalogued separately for inclusion in this database. refs., tabs., figs

  16. Proceedings of the 6. international symposium on waste processing and recycling in the mineral and metallurgical industries : WALSIM : water, air and land sustainability issues in mineral and metal extraction

    Energy Technology Data Exchange (ETDEWEB)

    Jia, C.Q. [Toronto Univ., ON (Canada). Dept. of Chemical Engineering and Applied Chemistry; Pickles, C.A. [Queen' s Univ., Kingston, ON (Canada). Dept. of Mining Engineering; Brienne, S. [Teck Cominco Metals Ltd., Trail, BC (Canada). Applied Research and Engineering; Rao, S.R. [McGill Univ., Montreal, PQ (Canada). Dept. of Mining and Materials Engineering] (eds.)

    2008-07-01

    The proceedings of the 2008 conference of metallurgists of CIM includes a collection 7 separate symposia, namely (1) aerospace materials and manufacturing, (2) water, air and land sustainability issues in mineral and metal extraction (WALSIM), (3) current status and future trends of functional nanometers, (4) recent developments in advanced high strength steels processing, (5) corrosion and wear of materials, (6) advanced characterization techniques applied to mineral, metals and materials, and (7) management in metallurgy. The WALSIM symposium dealt with environmental issues, with particular reference to the three topics of water, air and land sustainability associated with mineral and metal extraction, processing and fabrication. It provided an opportunity for scientists, engineers and plant operators to report on work aimed at achieving more efficient, environmentally sound and sustainable performance of the mineral and metals industry by enabling related organizations to exchange information on the latest developments in this field of activity with considerations of both industry and society. The sessions were entitled: resource recovery from waste material; by-products processing of slag, fly ash and electric arc furnace dust; metal recycling; wastewater and effluent treatment; gaseous pollutants treatment; and, sustainability and basic research. The symposium featured 43 presentations, of which 17 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  17. A Review of Research in Meetings Management: Some Issues and Challenges

    OpenAIRE

    Marijana Sikošek

    2012-01-01

    The aim of the paper is to provide a clear overview of existing research in the field of the meetings industry in international space and to open an academic discussion on the issues of this field in Slovenia. Through the method of literature analysis, we determine the position of the meetings industry in relation to business tourism and leisure tourism, explaining the most frequent definitions of meetings and pointing to the fragmentariness of the meetings industry, recognising it as a speci...

  18. Trade and Industrial Policy Strategies (TIPS) Core Grant - Phase IV ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Established in 1996, Trade and Industrial Policy Strategies (TIPS) is an organization that coordinates a network of researchers that seeks to provide the Government of South Africa, civil society and the region with independent advice on economic policy, with a particular focus on trade and industrial issues. Earlier phases of ...

  19. Incorporating network effects in a competitive electricity industry. An Australian perspective

    International Nuclear Information System (INIS)

    Outhred, H.; Kaye, J.

    1996-01-01

    The role of an electricity network in a competitive electricity industry is reviewed, the nation's experience with transmission pricing is discussed, and a 'Nodal Auction Model' for incorporating network effects in a competitive electricity industry is proposed. The model uses a computer-based auction procedure to address both the spatial issues associated with an electricity network and the temporal issues associated with operation scheduling. The objective is to provide a market framework that addresses both network effects and operation scheduling in a coordinated implementation of spot pricing theory. 12 refs

  20. Climate change issue table : petroleum downstream sector industry foundation paper

    International Nuclear Information System (INIS)

    Crandall, G.R.; Kelly, S.J.; Kromm, R.B.; Prime, M.G.

    1999-01-01

    An analysis of the impact of the Kyoto Protocol on the Canadian downstream petroleum industry is presented. The downstream sector includes petroleum refining, plus all activities regarding distribution, marketing and retailing of petroleum products. In 1990, the carbon dioxide (CO 2 ) emissions resulting from the production and consumption of petroleum products were about 207 megatons which is about 45 per cent of total Canadian CO 2 emissions. This report includes the analysis of the Base Case and the Kyoto Case. The Base Case is premised on the implementation of fuel sulphur reductions to meet cleaner fuels requirements and an enhanced program of refinery efficiency initiatives. Under the Base Case assumptions the CO 2 emissions from refinery operations in 2010 would be about 3.4 below 1990 levels. The Kyoto Case was developed on the basis of reductions in Canadian petroleum product demand that would be sufficient to achieve a 6 per cent reduction in GHG emissions from the production and consumption of petroleum products relative to 1990 levels. The model demonstrates the dramatic economic impact of the Kyoto Case reductions on the Canadian downstream petroleum sector. Investment requirements for capital improvements to further distillate production and to further desulphurization are estimated at $ 1.5 billion between 2005 and 2015. The reduced volume of gasoline sales would be expected to result in rationalization of retail outlets, resulting in the closure of some 2,000 retail outlets with a combined loss of about 12,000 jobs. It is suggested that similar impact in other countries that are signatory to the Kyoto Protocol could result in the shift of refining, refining industry jobs and related economic benefits to countries which are not participants in the Kyoto Protocol. 14 tabs., 6 figs., 5 appendices

  1. Integrative taxonomy detects cryptic and overlooked fish species in a neotropical river basin.

    Science.gov (United States)

    Gomes, Laís Carvalho; Pessali, Tiago Casarim; Sales, Naiara Guimarães; Pompeu, Paulo Santos; Carvalho, Daniel Cardoso

    2015-10-01

    The great freshwater fish diversity found in the neotropical region makes management and conservation actions challenging. Due to shortage of taxonomists and insufficient infrastructure to deal with such great biodiversity (i.e. taxonomic impediment), proposed remedies to accelerate species identification and descriptions include techniques that combine DNA-based identification and concise morphological description. The building of a DNA barcode reference database correlating meristic and genetic data was developed for 75 % of the Mucuri River basin's freshwater fish. We obtained a total of 141 DNA barcode sequences from 37 species belonging to 30 genera, 19 families, and 5 orders. Genetic distances within species, genera, and families were 0.74, 9.5, and 18.86 %, respectively. All species could be clearly identified by the DNA barcodes. Divergences between meristic morphological characteristics and DNA barcodes revealed two cryptic species among the Cyphocharax gilbert and Astyanax gr. bimaculatus specimens, and helped to identify two overlooked species within the Gymnotus and Astyanax taxa. Therefore, using a simplified model of neotropical biodiversity, we tested the efficiency of an integrative taxonomy approach for species discovery, identification of cryptic diversity, and accelerating biodiversity descriptions.

  2. Proceedings of the wind energy industry conference : develop, innovate, export : held in conjunction with Quebec's first wind energy industry gala

    International Nuclear Information System (INIS)

    2008-01-01

    This conference was dedicated to the wind energy industry and business opportunities in Quebec, the rest of Canada and abroad. It was held in conjunction with Quebec's first wind energy industry gala which highlighted the organizations and individuals that have made outstanding contributions to the wind power sector in Quebec over the past three years. The entire conference focused on current and future requests for proposals in Quebec, innovation, and exports. Some fifteen reputed speakers shared their knowledge and experience regarding technological development and technical support available in Quebec. It was intended to clarify current and future issues affecting the wind power industry and to build key relations with leading wind energy players. The sessions of the conference were entitled: the wind energy industry in Quebec and Canada; issues surrounding requests for proposals; the players involved in the request for proposals; visual impacts of wind farms; data transmission during wind farm construction; innovating to move ahead of the crowd; innovation in practice; exporting as a means of development; and, exports in practice. A tour of the Baie-des-Sable wind farm was also provided. The conference featured 24 presentations, of which 2 have been catalogued separately for inclusion in this database. refs., tabs., figs

  3. Environmental problems facing the electricity industry

    International Nuclear Information System (INIS)

    Johnson, S.

    1988-01-01

    The paper on the environmental problems facing the electricity industry was first presented at the World Electricity Conference, Nov. 1987. According to the author, the biggest immediate environmental challenge the electricity industry faces is the need for the role and importance of nuclear power to be reasserted clearly and unambiguously. The main environmental problems from electricity generation are air pollution and the carbon dioxide/greenhouse issue, and the author thinks that both could be reduced by an increased use of nuclear power as an energy source. (U.K.)

  4. Experimental modeling methods in Industrial Engineering

    Directory of Open Access Journals (Sweden)

    Peter Trebuňa

    2009-03-01

    Full Text Available Dynamic approaches to a management system of the present industrial practice, forcing businesses to address management issues in-house continuous improvement of production and non-production processes. Experience has repeatedly demonstrated the need for a system approach not only in analysis but also in the planning and actual implementation of these processes. Therefore, the contribution is focused on the description of the modeling in industrial practice by a system approach, in order to avoid erroneous application of the decision to the implementation phase, and thus prevent any longer applying methods "attempt - fallacy".

  5. Working With Plantation Communities: A Reflection of Social Issues

    OpenAIRE

    Abdul Rahman Saili; Jamayah Saili

    2013-01-01

    Abstract The plantation industry in Malaysia is aggressively expanding over the past decade driven by global demands for palm oil as a food staple and more recently bio fuels. The rapid growth in the industry is heavily dependent upon high labour and workforce. Such intensity has carried out social impact on the communities including plantation workers, small holders and their dependents. Therefore, this paper will outline what appear to be never ending issues impetus social problems. ...

  6. Eco-transformation of industrial parks in China

    NARCIS (Netherlands)

    Yu, C.

    2014-01-01

    During the past three decades, China has achieved impressive economic development. However, the pollution and resource depletion that accompanied China's rapid industrialization have led to severe environmental issues, such as ecosystem degradation, groundwater contamination and smog, which have

  7. Environmental issues affecting CCT development

    Energy Technology Data Exchange (ETDEWEB)

    Reidy, M. [U.S. House of Representatives, Washington, DC (United States)

    1997-12-31

    While no final legislative schedule has been set for the new Congress, two issues with strong environmental ramifications which are likely to affect the coal industry seem to top the list of closely watched debates in Washington -- the Environmental Protection Agency`s proposed new ozone and particulate matter standards and utility restructuring. The paper discusses the background of the proposed standards, public comment, the Congressional review of regulations, other legislative options, and utility restructuring.

  8. System issues for multichip packaging

    Science.gov (United States)

    Sage, Maurice G.; Hartley, Neil

    1991-04-01

    It is now generally recognised that the performance of an electronic system is governed by the choice of packaging technology. Never before have the technical and financial implications of a packaging technology choice been more critical and never before has technology interdependence or industry globalisation made the choice more difficult. This paper is aimed at examining the choices available and the system issues resulting from the move from single chip to multichip packaging.

  9. Ordinary Share Price Behaviour Around 'C' Share Issues by Investment Trusts

    OpenAIRE

    Adams, Andrew T; Szakacs, M

    1995-01-01

    This paper examines the "C" share issue, a method of issuing shares which is peculiar to the UK investment trust industry. In particular, we analyse abnormal returns and discount/premium to net asset value behaviour of the ordinary shares both before and after the announcement of "C" share issues. The research was conducted using event study methodology and an innovative approach to the analysis of discount/premium movements. The results suggest a tendency for the ordinary shares to outperfor...

  10. Energy Conservation Projects to Benefit the Railroad Industry

    Energy Technology Data Exchange (ETDEWEB)

    Clifford Mirman; Promod Vohra

    2009-12-31

    The Energy Conservation Projects to benefit the railroad industry using the Norfolk Southern Company as a model for the railroad industry has five unique tasks which are in areas of importance within the rail industry, and specifically in the area of energy conservation. The NIU Engineering and Technology research team looked at five significant areas in which research and development work can provide unique solutions to the railroad industry in energy the conservation. (1) Alternate Fuels - An examination of various blends of bio-based diesel fuels for the railroad industry, using Norfolk Southern as a model for the industry. The team determined that bio-diesel fuel is a suitable alternative to using straight diesel fuel, however, the cost and availability across the country varies to a great extent. (2) Utilization of fuel cells for locomotive power systems - While the application of the fuel cell has been successfully demonstrated in the passenger car, this is a very advanced topic for the railroad industry. There are many safety and power issues that the research team examined. (3) Thermal and emission reduction for current large scale diesel engines - The current locomotive system generates large amount of heat through engine cooling and heat dissipation when the traction motors are used to decelerate the train. The research team evaluated thermal management systems to efficiently deal with large thermal loads developed by the operating engines. (4) Use of Composite and Exotic Replacement Materials - Research team redesigned various components using new materials, coatings, and processes to provide the needed protection. Through design, analysis, and testing, new parts that can withstand the hostile environments were developed. (5) Tribology Applications - Identification of tribology issues in the Railroad industry which play a significant role in the improvement of energy usage. Research team analyzed and developed solutions which resulted in friction

  11. Analysis of the economic potential of solar thermal energy to provide industrial process heat. Final report, Volume I. [In-depth analysis of 78 industries

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-02-07

    The process heat data base assembled as the result of this survey includes specific process applications from 78 four-digit Standard Industrial Classification (SIC) groups. These applications account for the consumption of 9.81 quadrillion Btu in 1974, about 59 percent of the 16.6 quadrillion Btu estimated to have been used for all process heat in 1974. About 7/sup 1///sub 2/ percent of industrial process heat is used below 212/sup 0/F (100/sup 0/C), and 28 percent below 550/sup 0/F (288/sup 0/C). In this study, the quantitative assessment of the potential of solar thermal energy systems to provide industrial process heat indicates that solar energy has a maximum potential to provide 0.6 quadrillion Btu per year in 1985, and 7.3 quadrillion Btu per year in 2000, in economic competition with the projected costs of conventional fossil fuels for applications having a maximum required temperature of 550/sup 0/ (288/sup 0/C). A wide variety of collector types were compared for performance and cost characteristics. Performance calculations were carried out for a baseline solar system providing hot water in representative cities in six geographical regions within the U.S. Specific industries that should have significant potential for solar process heat for a variety of reasons include food, textiles, chemicals, and primary metals. Lumber and wood products, and paper and allied products also appear to have significant potential. However, good potential applications for solar process heat can be found across the board throughout industry. Finally, an assessment of nontechnical issues that may influence the use of solar process heat in industry showed that the most important issues are the establishment of solar rights, standardization and certification for solar components and systems, and resolution of certain labor-related issues. (Volume 1 of 3 volumes.)

  12. Software quality metrics aggregation in industry

    NARCIS (Netherlands)

    Mordal, K.; Anquetil, N.; Laval, J.; Serebrenik, A.; Vasilescu, B.N.; Ducasse, S.

    2013-01-01

    With the growing need for quality assessment of entire software systems in the industry, new issues are emerging. First, because most software quality metrics are defined at the level of individual software components, there is a need for aggregation methods to summarize the results at the system

  13. Advancing Understanding on Industrial Relations in Multinational Companies: Key Research Challenges and the INTREPID Contribution

    DEFF Research Database (Denmark)

    Gunnigle, Patrick; Valeria, Pulignano; Edwards, Tony

    2015-01-01

    companies using INTREPID (Investigation of Transnationals’ Employment Practices: an International Database) data. Finally, the paper identifies some of the main industrial relations issues that remain to be addressed, in effect charting a form of research agenda for future work using the INTREPID data......This paper has three principal aims. It firstly provides some theoretical background on the key current research issues and challenges in regard to industrial relations in multinational companies. It then presents a concise review of scholarship to date on industrial relations in multinational...

  14. Early Phase Process Evaluation: Industrial Practices

    Directory of Open Access Journals (Sweden)

    Zulfan Adi Putra

    2016-09-01

    Full Text Available Process route evaluation is a part of research and development (R&D works in an industrial chemical project life cycle. In this early phase, good process evaluation, including process synthesis and designs, provide guidance’s on the R&D project. The paper aimed to collect practical methods used in this early phase process route evaluation from author’s 10 years of industrial experiences.  The collected methods range from forward-backward process synthesis, functional process design, use of cost estimation, and applications of Monte Carlo simulation. Led by a good project management (e.g. via a stage-gate approach use of these methods have shown beneficial results. Some important results are strong arguments on whether or not the project will continue, as well as relevant technical and economic issues identified during this early phase process synthesis and design. Later on, these issues become guidance’s to the follow-up project, if it is continued.

  15. Industrial ecology: a new perspective on the future of the industrial system.

    Science.gov (United States)

    Erkman, S

    2001-09-22

    development and environmental issues in a fragmented and compartmentalised way. This is illustrated in the classical end-of-pipe strategy for the treatment of pollution, which has proven to be quite useful, but not adequate to make an efficient use of limited resources, in the context of a growing population with increasing economic aspirations. Thus, industrial ecology emerges at a time when it is becoming increasingly clear that the traditional pollution treatment approach (end-of-pipe) is not only insufficient to solve environmental problems, but also too costly in the long run.

  16. Survey on Issues related to National Nuclear Promotion Policy

    International Nuclear Information System (INIS)

    Woo, Byungchool; Lee, Youngjoon; Lee, Youngcheol; Jeong, I. K.; Kim, Hyunjun; Kim, Youngsoo; Yun, Sungwon; Moon, Keehwan; Chung, Whansam

    2013-06-01

    Ο Major issues surrounding nuclear are including suspicions about nuclear safety, spent-fuel management, acquiring the advanced R and D capabilities and making the nuclear a creative industry Ο Solid measures for securing safety should be formulated and implemented for reducing public anxiety of nuclear use Ο The long-term R and D performance system from a scientific perspective should be established for expanding Research and Development for safer use of nuclear Ο The spent-fuel management policy should be determined through publicizing process Ο Establishing small and medium enterprises-oriented supply system of reactors and SMRs and Encouraging the radiation fusion technology industrialization for promoting creative industry utilizing nuclear

  17. The photovoltaic industry on the path to a sustainable future--environmental and occupational health issues.

    Science.gov (United States)

    Bakhiyi, Bouchra; Labrèche, France; Zayed, Joseph

    2014-12-01

    As it supplies solar power, a priori considered harmless for the environment and human health compared with fossil fuels, the photovoltaic (PV) industry seems to contribute optimally to reduce greenhouse gas emissions and, overall, to sustainable development. However, considering the forecast for rapid growth, its use of potentially toxic substances and manufacturing processes presenting health and safety problems may jeopardize its benefits. This paper aims to establish a profile of the PV industry in order to determine current and emerging environmental and health concerns. A review of PV system life cycle assessments, in light of the current state of the industry and its developmental prospects, reveals information deficits concerning some sensitive life cycle indicators and environmental impacts, together with incomplete information on toxicological data and studies of workers' exposure to different chemical and physical hazards. Although solar panel installation is generally considered relatively safe, the occupational health concerns related to the growing number of hazardous materials handled in the PV industry warrants an all-inclusive occupational health and safety approach in order to achieve an optimal equilibrium with sustainability. To prevent eco-health problems from offsetting the benefits currently offered by the PV industry, manufacturers should cooperate actively with workers, researchers and government agencies toward improved and more transparent research, the adoption of specific and stricter regulations, the implementation of preventive risk management of occupational health and safety and, lastly, greater responsibilization toward PV systems from their design until their end of life. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. The petroleum industry and climate issues; KonKraft rapport 5; Petroleumsnaeringen og klimaspoersmaal

    Energy Technology Data Exchange (ETDEWEB)

    2009-07-01

    Broad scientific agreement prevails that human-produced (anthropogenic) greenhouse gas emissions affect the climate. The UN Intergovernmental Panel on Climate Change (IPCC) has established that such emissions must be significantly reduced to avoid serious consequences for the environment and society. Norway's petroleum industry recognises the climate challenge and has long worked to cut its emissions. These efforts avoided 40 million tonnes of carbon emissions in 1994-2007. The figure for 2006 alone was 4.5 million tonnes of carbon dioxide. Carbon capture and storage (CCS) has furthermore been initiated for natural gas production on the Snoehvit field in the Barents Sea, while the Gjoea and Valhall fields in the North Sea are to be powered from shore. These moves represent an annual cut of 1.3 million tonnes in carbon emissions by 2010. Further reduction measures totalling 800 000 tonnes per annum by 2013 have also been identified, and will help confirm Norway's position as the world's cleanest oil and gas producer. Norwegian greenhouse gas emissions, measured in carbon equivalent, totalled 55 million tonnes in 2007. Carbon dioxide accounted for 44.9 million tonnes. The total for the Norwegian continental shelf (NCS) was 13.8 million tonnes, including 13.2 million tonnes of carbon dioxide. KonKraft report 5 includes an account of action taken to reduce emissions from the NCS and measures planned for the future. The most power-intensive processes on an offshore installation are compression related to gas transport, injection of gas and water for pressure support, and pumping of oil and condensate. Power for these processes is largely generated by gas turbines, which provide the bulk of carbon emissions from the NCS. Flaring has accounted for about 10 per cent in recent years, but this share rose in 2007 because of start-up problems with the Snoehvit plant at Melkoeya Maturation of the NCS and the shift from oil to gas production will boost carbon

  19. EEE (environmental engineering economics) attributes for oil and gas industry

    International Nuclear Information System (INIS)

    Isreb, M.

    2006-01-01

    This paper outlined the basic attributes of environmental engineering economics (EEE) with reference to the oil and gas industry in Australia. The paper was designed as a reference guide for policy-makers, educators, and environmental engineers. Methods of calculating the Pareto Optimum status were discussed, and environmental values and principles were identified. Air quality indicators were outlined. The paper considered multidisciplinary approaches to EEE and sustainable development, as well as the application of statistics and qualitative methods in addressing contemporary issues. The ethical aspects of environmental policies were discussed. Issues related to environmental toxicity and public health were also examined. Various taxation approaches and financial incentives were reviewed. Environmental laws related to the oil and gas industry were outlined. Environmental assessment procedures were presented. It was concluded that environmental regulations within the industry will help to ensure appropriate pollution reductions. 7 refs

  20. Continuous Improvement and its Barriers in Electrical and Electronic Industry

    OpenAIRE

    Ahmad Md Fauzi; Yan Toh Li; Wei Chan Shiau; Aizat Ahmad Ahmad Nur; Raja Mohd Rasi Raja Zuraidah; Abdul Rahman Nor Aida; Muhd Nor Nik Hisyamudin; Hassan Mohd Fahrul; Hashim Fatan Adibah

    2017-01-01

    Continuous improvement is one of the core strategies for manufacturing excellent and it is considered vital in today’s business environment. Continuous improvement is an important factor in TQM implementation. However, manufacturers in Electrical and Electronic Industry is facing variety of challenges such as, time constraint, quality issue, headcount issue, human issue and competition in domestic as well as the global market. This paper presents total quality management practices in Electric...

  1. [Development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry].

    Science.gov (United States)

    Xiao, Yong-Qing; Li, Li; Liu, Ying; Ma, Yin-Lian; Yu, Ding-Rong

    2016-01-01

    To elucidate the key issues in the development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry Chinese herbal pieces industry. According to the author's accumulated experience over years and demand of the development of the Chinese herbal pieces industry, the key issues in the development and innovation on the Chinese herbal pieces industry were summarized. According to the author, the traditional Chinese medicine processing discipline shall focus on a application basis research. The development of this discipline should be closely related to the development of Chinese herbal pieces. The traditional Chinese medicine processing discipline can be improved and its results can be transformed only if this discipline were correlated with the Chinese herbal pieces industry, matched with the development of the Chinese herbal pieces industry, and solved the problems in the development on the Chinese herbal pieces industry. The development of traditional Chinese medicine processing discipline and the Chinese herbal pieces industry also requires scientific researchers to make constant innovations, realize the specialty of the researches, and innovate based on inheritance. Copyright© by the Chinese Pharmaceutical Association.

  2. The future of nuclear power after Sizewell B. 3 v.: v. 1 Economic issues; v. 2 Environmental and safety issues; v. 3 Public perception issues

    International Nuclear Information System (INIS)

    1987-01-01

    The three days of conference proceedings are published in three separate volumes. The first includes 7 papers relating to economic issues - those presented at the Sizewell-B public inquiry and the changes in the economic situation since the inquiry ended. The electricity demand, how this demand is to be met by nuclear and other fuel sources and how energy conservation might be an economic alternative to simply building more generating capacity are all issues discussed. The possible privatisation of the industry is also touched on. Volume two has 8 papers concerned with environmental and safety issues. These include the influence of the Sizewell-B decision on nuclear licensing and reactor safety, the technical and safety aspects of pressurized water reactors (PWR), the roles of British Nuclear Fuels and the United Kingdom Atomic Energy Authority, and radiation protection and effluent discharge control. The six papers in volume 3 look at public perception issues - not only towards nuclear power but towards the public inquiry process. The local authority view, the Friends of the Earth case against the PWR, and technical expertise in the decision process are also topics covered. All the papers are indexed separately. (UK)

  3. Data Integrity: History, Issues, and Remediation of Issues.

    Science.gov (United States)

    Rattan, Anil K

    2018-01-01

    Data integrity is critical to regulatory compliance, and the fundamental reason for 21 CFR Part 11 published by the U.S. Food and Drug Administration (FDA). FDA published the first guideline in 1963, and since then FDA and European Union (EU) have published numerous guidelines on various topics related to data integrity for the pharmaceutical industry. Regulators wanted to make certain that industry capture accurate data during the drug development lifecycle and through commercialization-consider the number of warning letters issued lately by inspectors across the globe on data integrity. This article discusses the history of regulations put forward by various regulatory bodies, the term ALCOA Plus adopted by regulators, the impact of not following regulations, and some prevention methods by using some simple checklists, self-audit, and self-inspection techniques. FDA uses the acronym ALCOA to define its expectations of electronic data. ALCOA stands for Attributable, Legible, Contemporaneous, Original, and Accurate. ALCOA was further expanded to ALCOA Plus, and the Plus means Enduring, Available and Accessible, Complete, Consistent, Credible, and Corroborated. If we do not follow the regulations as written, then there is a huge risk. This article covers some of the risk aspects. To prevent data integrity, various solutions can be implemented such as a simple checklist for various systems, self-audit, and self-inspections. To do that we have to develop strategy, people, implement better business processes, and gain a better understanding of data lifecycle as well as technology. LAY ABSTRACT: If one does a Google search on "What is data integrity?" the first page will give the definition of data integrity, how to learn more about data integrity, the history of data integrity, risk management of data integrity, and at the top about various U.S. Food and Drug Administration (FDA) and European Union (EU) regulations. Data integrity is nothing but about accuracy of data

  4. A new impetus for developing industrial process heat applications of HTR in europe - HTR2008-58259

    International Nuclear Information System (INIS)

    Hittner, D.; De Groot, S.; Griffay, G.; Yvon, P.; Pienkowski, L.; Ruer, J.; Angulo, C.; Laquaniello, G.

    2008-01-01

    Due to its high operating temperature (up to 850 deg. C with present technologies, possibly higher in the longer term), and its power range (a few hundred MW), the modular HTR could address a larger scope of industrial process heat needs than other present nuclear systems. Even if HTR can contribute to competitive electricity generation, this potential for industrial heat applications is the main incentive for developing this type of reactor, as it could open to nuclear energy a large non-electricity market. However several issues must be addressed and solved successfully for HTR to actually enter the market of industrial process heat: 1) as an absolute prerequisite, to develop a strategic alliance of nuclear industry and R and D with process heat user industries. 2) to solve some key technical issues, as for instance the design of a reactor and of a coupling system flexible enough to reconcile a single reactor design with multiple applications and versatile requirements for the heat source, and the development of special adaptations of the application processes or even of new processes to fit with the assets and constraints of HTR heat supply, 3) to solve critical industrial issues such as economic competitiveness, availability and 4) to address the licensing issues raised by the conjunction of nuclear and industrial risks. In line with IAEA initiatives for supporting non-electric applications of nuclear energy and with the orientations of the SET-Plan of the European Commission, the (European) HTR Technology Network (HTR-TN) proposes a new project, together with industrial process heat user partners, to provide a first impetus to the strategic alliance between nuclear and non-nuclear industries. End user requirements will be expressed systematically on the basis of inputs from industrial partners on various types of process heat applications. These requirements will be confronted with the capabilities of the HTR heat source, in order to point out possible

  5. Same yet different : a comparison of pipeline industries in Canada and Australia

    Energy Technology Data Exchange (ETDEWEB)

    Jaques, S. [Egis Consulting (Australia)

    2000-07-01

    A comparative evaluation of the pipeline industries in Canada and Australia was presented. The two countries are very similar in geography, politics, native land issues and populations. This paper focused on the similarities with respect to the pipeline industry and the long-distance, cross-country gas transmission pipelines. It addressed issues regarding pipeline industry organization, historical aspects and the infrastructure in both countries. The design practices of each country were compared and contrasted with attention to how construction techniques are affected by the terrain, climate and water crossing in each country. The author discussed issues such as grade, trench, string pipe, weld pipe, coat welds, hydrostatic testing, lowering, backfill and clean up. The issue of remote location factors was also presented. The future opportunities for Canada lies in Arctic gas development. For Australia, future opportunities lie in the expansion of the infrastructure to include gas from PNG to Queensland. Another possible opportunity is the development of an offshore distribution system to Tasmania. The author also noted that the aging pipeline system in both Canada and Australia will require careful consideration with respect to corrosion. 18 refs., 2 tabs., 2 figs.

  6. Ontario's petroleum legacy : the birth, evolution and challenges of a global industry

    International Nuclear Information System (INIS)

    Gray, E.

    2008-01-01

    This book provided a historical account of Ontario's role in the global oil industry, from the coming in of the first wells at Oil Springs in the mid-19th century when the primary fuel sources were wood, coal, and water. In 1858, oil seeps in Enniskillen Township, Lambton County, Ontario revealed the existence of petroleum, which encouraged the first drilling of wells and the development of the global industry. The book explored issues related to imperialism, resource development, local history and the colonial land policies surrounding the oil boom. Details of the Petrolia oil discovery were included along with the accomplishments of the entrepreneurs who were instrumental in developing the petroleum industry in Ontario. The major elements surrounding the development of Canada's oil and gas industry were presented, beginning with the coal-oil-refining industry which paved the way for the development of the oil industry; the early oilmen from Oil Springs and Petrolia who drilled for oil; the development of the oil and gas industry's position today as a major strength of the Canadian economy; and the environmental and climate change issues that currently confront the industry. After 150 years, the oil fields at Petrolia and Oil Springs still produce commercial quantities of crude oil from at least 650 active wells. refs., figs

  7. Biosimilars--global issues, national solutions.

    Science.gov (United States)

    Knezevic, Ivana; Griffiths, Elwyn

    2011-09-01

    Biotechnology derived medicinal products are presently the best characterized biologicals with considerable production and clinical experience, and have revolutionized the treatment of some of the most difficult-to-treat diseases, prolonging and improving the quality of life and patient care. They are also currently one of the fastest growing segments of the pharmaceutical industry market. The critical challenge that the biopharmaceutical industry is facing is the expiry of patents for the first generation of biopharmaceuticals, mainly recombinant DNA derived products, such as interferons, growth hormone and erythropoetin. The question that immediately arose was how should such copies of the originator products be licensed, bearing in mind that they are highly complex biological molecules produced by equally complex biological production processes with their inherent problem of biological variability. Copying biologicals is much more complex than copying small molecules and the critical issue was how to handle the licensing of products if relying in part on data from an innovator product. Since 2004 there has been considerable international consultation on how to deal with biosimilars and biological copy products. This has led to a better understanding of the challenges in the regulatory evaluation of the quality, safety and efficacy of "biosimilars", to the exchange of information between regulators, as well as to the identification of key issues. The aim of this article is to provide a brief overview of the scientific and regulatory challenges faced in developing and evaluating similar biotherapeutic products for global use. It is intended as an introduction to the series of articles in this special issue of Biologicals devoted to similar biotherapeutic products. Copyright © 2011. Published by Elsevier Ltd.

  8. Sustainability in the Education of Industrial Designers: The Case for Australia

    Science.gov (United States)

    Ramirez, Mariano

    2006-01-01

    Purpose: The paper intends to determine the extent to which environmental sustainability issues are integrated in the curricula of industrial design programs in Australian universities. Design/methodology/approach: Industrial design lecturers and program heads were invited to participate in a web-based survey on their university's industrial…

  9. Biomass sustainability criteria: Greenhouse gas accounting issues for biogas and biomethane facilities

    International Nuclear Information System (INIS)

    Adams, P.W.R.; Mezzullo, W.G.; McManus, M.C.

    2015-01-01

    Biomass sustainability criteria were introduced in the UK following the EU Renewable Energy Directive. Criteria are now applicable to solid biomass and biogas, however because it is not mandatory criteria can be adapted by member states with the risk of different interpretation. Operators are required to report greenhouse gas (GHG) emissions for every MJ of energy produced. This paper provides a rigorous analysis of the current GHG emissions accounting methodology for biogas facilities to assess expected compliance for producers. This research uses data from operating CHP and biomethane facilities to calculate GHG emissions using the existing methodology and Government calculator. Results show that whilst many biogas facilities will meet GHG thresholds, as presently defined by Government, several operators may not comply due to methodological uncertainties and chosen operating practices. Several GHG accounting issues are identified which need to be addressed so the biogas industry achieves its reporting obligations and is represented objectively with other bioenergy technologies. Significant methodological issues are highlighted; including consignment definition, mass balance allocation, measurement of fugitive methane emissions, accounting for digestate co-products, fossil fuel comparators, and other accounting problems. Recommendations are made to help address the GHG accounting issues for policy makers and the biogas industry. - Highlights: • GHG accounting issues identified that affect potential compliance with legislation. • Appropriate recognition of digestate value is a key issue for biogas industry. • Fugitive methane emissions measurement is critical for sustainability criteria. • Chosen fossil fuel comparator value determines the potential GHG saving. • Rigorous analysis of GHG accounting methodology for biogas and biomethane systems.

  10. Indian mutual fund industry: Opportunities and challenges

    OpenAIRE

    Jayant R. Kale; Venkatesh Panchapagesan

    2012-01-01

    This article presents an overview of the mutual fund industry in India and the reasons for its poor penetration, which includes lack of objective research. It benchmarks the industry globally, and raises key issues regarding the ownership and performance of mutual funds, the sensitivity of fund flows to performance, and the importance of regulation to its growth, all of which have been largely under researched in India. It then captures the views of leading practitioners on these and other is...

  11. Environmental remote sensing for the petroleum industry

    International Nuclear Information System (INIS)

    Baker, R.N.

    1991-01-01

    Remote sensing techniques developed for exploration programs can often be used to address environmental issues facing the petroleum industry. While this industry becomes increasingly more environmentally conscious, budgets remain tight, requiring any technology used in environmental applications to be cost effective, widely available and reliable. In this paper a three-fold analysis of environmental issues facing the petroleum industry concludes: major areas of concern included environmental mapping natural habitats, surface cover, change through time, pollution monitoring (hazardous wastes, oil seeps and spills on and offshore), earth hazards assessment, baseline studies, facilities sitting and crisis response. options matrices were developed plotting current and near future RS technology vs environmental concerns, and each sensor/platform combination subjectively evaluated to determine which combination could best address the problem. While presently available RS technology (both airborne and spaceborne) has significant capability toward environmental mapping, hazards detection and other concerns, the anticipated launches of ERS-1, JERS-1, Landsat-6 and other systems will provide environmentally useful data available today only from relatively expensive and local airborne surveys. Low altitude airborne surveys and ground/sea truth will continue to be critical to any quantitative studies

  12. P.C. disposal decisions: a banking industry case study

    Science.gov (United States)

    Shah, Sejal P.; Sarkis, Joseph

    2002-02-01

    The service industry and the manufacturing industry are interlinked in a supply chain situation. Part of the effectiveness of some manufacturing industry environmental performance based on remanufacturing and recycling is dependent on service industry decisions. In the information technology arena, personal computers (PCs) are the hard equipment of the service industry. The end-of-life decisions made by the service industry, and in this case the banking industry will have implications for the amount of systems within the waste or reverse logistics stream for manufacturers. Looking at some of the issues (and presenting a model for evaluation) related to decision making concerning end-of-life disposition for PCs is something this paper investigates. The analytical hierarchy process (AHP) is applied in this circumstance. The development of the model, its application, and results, provide the basis for much of the discussion in this paper.

  13. Domestic safeguards in the nuclear industry

    International Nuclear Information System (INIS)

    Uhrig, R.E.

    1979-01-01

    The Energy Reorganization Act of 1974 brought about markedly increased security requirements at nuclear power plants. NRC established a threat level against which the security forces were expected to defend. It is asserted that an inadequate legal basis exists for the NRC requirement that nuclear plants be defended by the use of deadly force, if necessary, and that complex issues such as apprehension, retention, and pursuit of intruders are left vague. Security measures patterned after the airline industry, resolution of the deadly force issue, and definition of a creditable threat level are proposed

  14. The natural gas industry in Russia: reforms in debate

    International Nuclear Information System (INIS)

    Locatelli, Catherine

    2014-07-01

    Due to the emergence of shale gas in the USA, Russia has become the second world producer of natural gas but this industry remains one of the most important sectors of the Russian economy as natural gas exports are an essential component or the Russian economic policy. Addressing this industry, the author first comments the evolutions of gas production since 1960 and its perspectives by 2020 and 2030. He also outlines the importance of the cost issue associated with the choice between mega projects and smaller ones. In a second part, the author comments and discusses the evolutions of gas exports towards Europe and of the export strategy. He evokes the possibility of arbitration between price and quantity in Gazprom's strategy, the possibility of a strategy of downstream integration on European gas markets, the possibility of a diversification of export markets (notably LNG markets as several LNG projects are planned). In the third part, the author describes the Gazprom model, comments the recurring debate on a reform of this holding, and discusses its quantity-based management and the issue of Gazprom's efficiency. He briefly evokes the issue of reform of the Russian gas industry, the progressive emergence of new actors

  15. Success in Asian refining -- Strategies for a growth industry

    International Nuclear Information System (INIS)

    Burke, B.F.

    1994-01-01

    Asia offers some of the best growth opportunities to the global refining industry. Many of its nations are in the process of industrializing, with a rapid rise in living standards and associated energy use. Growth trends are firmly established, with petroleum use in particular increasing rapidly as modern transport infrastructures develop. Of perhaps greater importance is Asia's potential for continued growth based on population and GDP trends. While the expected growth offers a wide range of opportunities, succeeding in the unique Asian marketplace will be a challenge mastered by only a few new entrants. This paper will examine some of the critical issues that will drive success and shape the refining business in Asia. Industry fundamentals will be reviewed, with a focus on growth and profit drivers. With the fundamental framework established, the unique challenges posed by the Asian environment, including cultural issues, investment requirements, regulatory trends and issues in market development will be discussed. The ability to succeed in Asia by identifying factors that create local advantage within a very diverse region will be discussed. The need to merge corporate capabilities and objectives with regional opportunities is the key requirement to succeed in entering or expanding in the region

  16. "Industrie 4.0" and Smart Manufacturing – A Review of Research Issues and Application Examples

    OpenAIRE

    Klaus-Dieter Thoben; Stefan Wiesner; Thorsten Wuest

    2017-01-01

    A fourth industrial revolution is occurring in global manufacturing. It is based on the introduction of Internet of things and servitization concepts into manufacturing companies, leading to vertically and horizontally integrated production systems. The resulting smart factories are able to fulfill dynamic customer demands with high variability in small lot sizes while integrating human ingenuity and automation. To support the manufacturing industry in this conversion process and enhance glob...

  17. High-speed civil transport issues and technology program

    Science.gov (United States)

    Hewett, Marle D.

    1992-01-01

    A strawman program plan is presented, consisting of technology developments and demonstrations required to support the construction of a high-speed civil transport. The plan includes a compilation of technology issues related to the development of a transport. The issues represent technical areas in which research and development are required to allow airframe manufacturers to pursue an HSCT development. The vast majority of technical issues presented require flight demonstrated and validated solutions before a transport development will be undertaken by the industry. The author believes that NASA is the agency best suited to address flight demonstration issues in a concentrated effort. The new Integrated Test Facility at NASA Dryden Flight Research Facility is considered ideally suited to the task of supporting ground validations of proof-of-concept and prototype system demonstrations before night demonstrations. An elaborate ground hardware-in-the-loop (iron bird) simulation supported in this facility provides a viable alternative to developing an expensive fill-scale prototype transport technology demonstrator. Drygen's SR-71 assets, modified appropriately, are a suitable test-bed for supporting flight demonstrations and validations of certain transport technology solutions. A subscale, manned or unmanned flight demonstrator is suitable for flight validation of transport technology solutions, if appropriate structural similarity relationships can be established. The author contends that developing a full-scale prototype transport technology demonstrator is the best alternative to ensuring that a positive decision to develop a transport is reached by the United States aerospace industry.

  18. Patient's medicines brought to hospital: an overlooked resource?

    Science.gov (United States)

    Ware, G J

    1993-10-27

    To quantify potential cost advantages and identify practical safeguards required for utilising patients own medicines while in hospital, and returning them on discharge. All medicines brought in by patients in two wards of a geriatric assessment and rehabilitation unit at Auckland Hospital were examined by the pharmacist, and their suitability for re-issue assessed. Medicines were regarded as suitable for use where they could be positively identified, had been dispensed within 3 months of admission, or if packed in foil, provided the expiry date and manufacturer identification were on the foil. Medicines (260 items) totalling $2,976, assessed over a 6 month period, were regarded as suitable for use by the patient, with a mean value of $11.36 per patient. Patients own medicines used within the hospital with a unit-of-issue distribution system, and taken home by them on discharge, would provide appreciable savings for the hospital medicine budget and reduction in waste of the overall health dollar.

  19. Acceptable risks: occupational health in the nuclear industry

    International Nuclear Information System (INIS)

    Brown, M.S.

    1980-01-01

    This thesis examines the risk of working in the nuclear power industry. It reviews the history of the industry, government regulatory activities, and current scientific evidence of the health effects of radiation exposure. A discussion of current controversies over reduction in exposure limits is presented along with an analysis of the issues and problems associated with determinations of acceptable workplace risks. The thesis analyzes the controversy in terms of the acceptability of risk. The question of acceptability does not lend itself to technical evaluations of risks, costs, and benefits but is a social judgment of the necessity of a particular occupation or industry in society. At issue is the level of profits foregone by reductions in risk. This document concludes that the legitimacy of decisions about acceptable risks rests on the informed participation of all interested parties, including workers, in a process of defining socially necessary production. There must be opportunities to refuse higher risk jobs without losing a livelihood and adequate compensation for workers who accept hazardous jobs for the benefit of society

  20. Still a hot issue. US fire protection 20 years on

    International Nuclear Information System (INIS)

    Hathaway, L.R.

    1995-01-01

    Current fire protection concerns in the US nuclear industry are reviewed. Twenty years ago, a fire at the Brown's Ferry nuclear plant triggered a vigorous programme of regulation by the US Nuclear Regulatory Commission (NRC) and a still active response by power plant operators in seeking protection measures to meet the NRC criteria. The largest fire protection issue facing the industry concerns Thermo-Lag, a product formed from resins, subliming materials and fibreglass. This fire resistant wrap was installed in about 75 plants to provide a barrier between safety related cable systems. The Brown's Ferry fire has re-emphasised the importance of the separation criteria between redundant safety systems. Since 1989, however, there have been doubts about the adequacy of Thermo-Lag barriers and a major testing and analysis project addressing the problem is currently being sponsored by six utilities. Other regulatory- related issues facing the industry are the recently proposed defence-in-depth fire protection methodology, and for the future, fire protection strategies to cover shutdown, turbine generators and penetration seals through fire barriers. (UK)

  1. Challenging Barriers to the Evolution of the Saudi Animation Industry Life-Cycle

    OpenAIRE

    Alharbi, O.; Baines, E.

    2015-01-01

    Conference proceedings were published with the paper available on https://www.waset.org/abstracts/industrial-and-manufacturing-engineering/27685 The animation industry is one of the creative industries that have attracted recent historiographical attention. However, there has been very limited research on Saudi Arabian and wider Arabian animation industries, while there are a large number of studies that have covered this issue for North America, Europe and East Asia. The existing studies ...

  2. Demand Forecasting in the Fashion Industry: A Review

    Directory of Open Access Journals (Sweden)

    Maria Elena Nenni

    2013-08-01

    Full Text Available Forecasting demand is a crucial issue for driving efficient operations management plans. This is especially the case in the fashion industry, where demand uncertainty, lack of historical data and seasonal trends usually coexist. Many approaches to this issue have been proposed in the literature over the past few decades. In this paper, forecasting methods are compared with the aim of linking approaches to the market features.

  3. 4th CIRP International Conference on Industrial Product-Service Systems

    CERN Document Server

    Kimita, Koji

    2013-01-01

    Industrial Product-Service Systems (IPS2), which is defined as “an integrated industrial product and service offering that delivers value in use,” has expanded rapidly over the last decade. IPS2 has allowed us to achieve both high added value and high productivity and has enriched our QOL by improving the performance of products and services. We are now struggling with many awkward issues related to sustainability, but IPS2 is expected to be the “philosopher’s stone” for solving these issues. Following the pattern of conferences held in Cranfield in 2009, Linköping in 2010, and Braunschweig in 2011, the fourth International CIRP Conference on Industrial Product-Service Systems, held on November 8-9, 2012, in Tokyo, will cover various aspects of IPS2. Topics planned for this year’s conference reflect the latest IPS2 information in both the natural sciences and humanities and include case studies from various industries. IPS2 is still a relatively new field, so it is important to keep track of the ...

  4. Radiological emergencies in industry (causes and consequences). Address at the second national course of Radiation Safety in Industry. Jun 5-7 2000 Guatemala

    International Nuclear Information System (INIS)

    Estrada, Edgar

    2000-06-01

    The address discusses the following issues: review of accidents in industrial radiography, human factors, technical failures, factors that decrease risk, personnel training, design of equipment and recommendations

  5. Resolving traceability issues of product derivation for software product lines

    OpenAIRE

    Abid, Saad bin

    2009-01-01

    peer-reviewed Dealing with traceability management issues during model based product derivation in large complex industrial SPL is error prone due to the lack of tool support. As a result traceability management between connected models emerges as an important research topic. In this position paper, we discuss research challenges as scenarios from developed example product line and give recommendations on resolving traceability issues during product derivation. We also discuss initial idea...

  6. A position paper for a central procurement organization for the nuclear power industry

    International Nuclear Information System (INIS)

    Hendricks, J.R.

    1996-01-01

    This paper integrates the results of numerous nuclear utility industry meetings with commercial business practices. The Central Procurement Organization (CPO) is designed to achieve an immediate 30%--50% reduction in total procurement, engineering qualification, warehousing, and distribution cost. Three (3) areas define a CPO success criteria: (1) Lean, credible, and cost-effective issues discussed include facility cost, operational cost, staff expertise, product priorities, warehousing, and distribution, (2) Common technical, commercial, and quality requirement issues discussed include current industry practices and proposed future methodologies, and (3) Financial survivability issues which are the most critical since the CPO must exist during changing internal and external utility environments

  7. Regulator and industry Co-operation on safety research: challenges and opportunities. Final report and answers to questionnaire

    International Nuclear Information System (INIS)

    2003-02-01

    A Group has been set up by the CSNI to identify and review the issues which hinder closer co-operation on research between regulators and industry, and to propose possible ways for resolving such issues while maintaining regulatory independence in decision-making. The Group has analyzed the potential advantages and disadvantages of regulator-industry collaboration in safety research and has also provided indications on how to overcome possible difficulties that can arise from such collaboration. The Group focused in particular on the issue of regulator independence, on means to preserve it and ways to demonstrate it to the public while undertaking collaboration with industry

  8. NSF/AFOSR/ASME Workshop on Tribology Issues and Opportunities in MEMS

    CERN Document Server

    1998-01-01

    Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the constr...

  9. Environmental Monitoring and the Gas Industry: Program Manager Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Gregory D. Gillispie

    1997-12-01

    This document has been developed for the nontechnical gas industry manager who has the responsibility for the development of waste or potentially contaminated soil and groundwater data or must make decisions based on such data for the management or remediation of these materials. It explores the pse of common analytical chemistry instrumentation and associated techniques for identification of environmentally hazardous materials. Sufficient detail is given to familiarize the nontechnical reader with the principles behind the operation of each technique. The scope and realm of the techniques and their constituent variations are portrayed through a discussion of crucial details and, where appropriate, the depiction of real-life data. It is the author's intention to provide an easily understood handbook for gas industry management. Techniques which determine the presence, composition, and quantification of gas industry wastes are discussed. Greater focus is given to traditional techniques which have been the mainstay of modem analytical benchwork. However, with the continual advancement of instrumental principles and design, several techniques have been included which are likely to receive greater attention in fiture considerations for waste-related detection. Definitions and concepts inherent to a thorough understanding of the principles common to analytical chemistry are discussed. It is also crucial that gas industry managers understand the effects of the various actions which take place before, during, and after the actual sampling step. When a series of sample collection, storage, and transport activities occur, new or inexperienced project managers may overlook or misunderstand the importance of the sequence. Each step has an impact on the final results of the measurement process; errors in judgment or decision making can be costly. Specific techniques and methodologies for the collection, storage, and transport of environmental media samples are not

  10. Industrial influences on R&D transfer to China

    DEFF Research Database (Denmark)

    Søberg, Peder Veng

    2010-01-01

    , and innovation theory, which is illustrated in two cases from globally leading MNCs from different industries and technological fields which have established R&D units in China. It addresses the issue of industrial influences on R&D transfer to emerging markets, and the importance of complementary assets...... the argument that complementary assets are important for R&D in emerging markets. Implications for management in China are outlined. The term captive knowledge transfer is coined....

  11. Industry information service

    International Nuclear Information System (INIS)

    Yigit, Ipek

    1993-01-01

    BNF is the UK nuclear industry's representative organisation and its membership is inclusive of the entire civil nuclear industry in the Britain. BNF members include Britain's two nuclear electricity generating companies, Nuclear Electric and Scottish Nuclear, who between them manage the seventeen nuclear power stations which provide approximately 20% of the country's generating capacity. An important role of the Forum is to act as the information centre for the industry as a whole and during 1992, the Forum has strengthened its information service with the setting up of an extensive, computer-based network. The network has been established to provide an effective way of managing UK domestic nuclear-related issues and for maximising the news value of our industry's achievements. Equally important is the service's role as an international source of information - particularly when nuclear incidents occur outside the UK. The Forum also acts as an international exchange centre, disseminating technical information, for example, and by promptly providing accurate and comprehensive information to minimise the potential damage to public confidence in nuclear power generation which may be caused by any reported nuclear incidents. Recent examples of the successful operation of the BNF information service and its communications network have been the Leningradskya incident in March 1992 and the hurricane Andrew situation which developed at the end of August 1992

  12. Guide to the economic regulation of the electricity industry

    International Nuclear Information System (INIS)

    1999-06-01

    Guide to the Economic Regulation of the Electricity Industry, part of the series of OXERA Guides to Regulation, is designed as an essential work of reference for those who work in regulation and for practitioners who need to understand the needs and mechanics of regulation. The 154-page document provides: comprehensive coverage of the institutional and legal framework which defines the regulation of the electricity industry; an examination of current regulatory issues and developments in the industry; explanations of the roles of the key players; a condensed account of all the relevant legal documents; coverage of the industry in Scotland and Northern Ireland. (Author)

  13. 77 FR 66409 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

    Science.gov (United States)

    2012-11-05

    ...., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service... occupants. To address this concern, Diamond Aircraft Industries (DAI) published Mandatory Service Bulletin... MCAI in the AD docket. Relevant Service Information Diamond Aircraft Industries GmbH has issued Diamond...

  14. Physical inactivity and sedentary behavior: Overlooked risk factors in autoimmune rheumatic diseases?

    Science.gov (United States)

    Pinto, Ana Jéssica; Roschel, Hamilton; de Sá Pinto, Ana Lúcia; Lima, Fernanda Rodrigues; Pereira, Rosa Maria Rodrigues; Silva, Clovis Artur; Bonfá, Eloisa; Gualano, Bruno

    2017-07-01

    This review aims to (1) summarize the estimates of physical inactivity and sedentary behavior in autoimmune rheumatic diseases; (2) describe the relationship between physical (in)activity levels and disease-related outcomes; (3) contextualize the estimates and impact of physical inactivity and sedentary behavior in autoimmune diseases compared to other rheumatic diseases and chronic conditions; and (4) discuss scientific perspectives around this theme and potential clinical interventions to attenuate these preventable risk factors. We compiled evidence to show that estimates of physical inactivity and sedentary behavior in autoimmune rheumatic diseases are generally comparable to other rheumatic diseases as well as to other chronic conditions (e.g., type 2 diabetes, cardiovascular diseases, and obesity), in which a lack of physical activity and excess of sedentary behavior are well-known predictors of morbimortality. In addition, we also showed evidence that both physical inactivity and sedentary behavior may be associated with poor health-related outcomes (e.g., worse disease symptoms and low functionality) in autoimmune rheumatic diseases. Thus, putting into practice interventions to make the patients "sit less and move more", particularly light-intensity activities and/or breaking-up sedentary time, is a simple and prudent therapeutic approach to minimize physical inactivity and sedentary behavior, which are overlooked yet modifiable risk factors in the field of autoimmune rheumatic diseases. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. The Training of Technical Staff in Libyan Industrial Companies: Issues in Traning Needs Analysis

    Directory of Open Access Journals (Sweden)

    Mohamed Shibani

    2017-05-01

    Full Text Available By implementing Training Needs Analysis (TNA, organisations can improve the training need identification process and minimise the influence of social factors on nominations for training; such as kinship and friendship, which makes the managers exercised mediation "wasta" and favouritism when they perform their tasks. Therefore, paper presents the results of an investigation into current TNA practice in Libyan industrial companies (LICs, including the barriers that prevent its successful implementation and how it might be improved. A qualitative approach was adopted in collecting data by means of semi-structured interviews with 17 senior managers in two selected companies. The findings show that training needs are mostly identified through an analysis at the individual level only and that no consideration is given to organisational or operational levels. The paper contributes to existing knowledge on the application and effectiveness of TNA in industrial sectors by specifically investigating the implementation of TNA in the Libyan industrial context; it offers ideas and insights to those responsible for training in LICs to improve their understanding of the role of TNA and how they can manage the TNA process to help develop their employees.

  16. BC's oil and gas industry : opportunities and challenges

    International Nuclear Information System (INIS)

    Alvarez, P.

    2003-01-01

    An update of the Canadian petroleum and natural gas industry was presented with reference to activity trends and major issues. The presentation also described opportunities and challenges facing the industry in British Columbia and reviewed the impact of federal policies on BC. In recent years the industry has moved to oil sands and unconventional gas, offshore sites, and coalbed methane development. Other changes are a result of technology which makes it possible to drill deeper and faster while having less environmental impact. Government issues have become increasingly complex, however. Industry capital spending from 2000 to 2003 was presented for Northern Canada, the east coast offshore, Alberta, the Western Canada Sedimentary Basin, oil sand deposits, and international activities. The presentation included several graphs depicting: the changing natural gas production mix; North American natural gas demand; wells drilled by province; natural gas resources in BC; upstream capital spending in BC; wells drilled by type and depth in BC; top natural gas wells in 2000 and 2002; natural gas production in BC; finding and development costs for Canadian natural gas; and, the widening gap of the federal income tax rate between oil and natural gas and other industries. British Columbia is in the strategic position of having significant untapped gas potential in the northeastern part of the province. For now, there is sufficient pipeline capacity to bring the gas to markets in the United States where there is a strong demand for electric power generation. 16 figs

  17. 75 FR 24584 - Request for Nominations for the Industry Trade Advisory Committees (ITACs)

    Science.gov (United States)

    2010-05-05

    ... of industry perspectives is represented. Other trade policy issues, e.g., government procurement... DEPARTMENT OF COMMERCE International Trade Administration Request for Nominations for the Industry Trade Advisory Committees (ITACs) AGENCY: International Trade Administration, Manufacturing and Services...

  18. Project and Production Management in the Construction Industry

    OpenAIRE

    Chien-Ho Ko

    2012-01-01

    In this issue, the Journal of Engineering, Project, and Production Management (EPPM-Journal) presents five original research papers related to project and production management in the construction industry from authors in Africa, Asia, and Europe.

  19. Precautionary interventions in industrial areas. An optimal stopping approach

    Energy Technology Data Exchange (ETDEWEB)

    Pauwels, N

    2001-04-01

    The contribution consists of an abstract of a PhD thesis. The thesis deals with the precautionary evacuation of an industrial facility's workforce threatened by a radiological release from a nuclear power plant nearby. The issue of deferring intervention decisions until additional information is available is addressed. Furthermore, interventions in industrial areas with a concentration of chemical and petrochemical plants form part of this study.

  20. Precautionary interventions in industrial areas. An optimal stopping approach

    International Nuclear Information System (INIS)

    Pauwels, N.

    2001-01-01

    The contribution consists of an abstract of a PhD thesis. The thesis deals with the precautionary evacuation of an industrial facility's workforce threatened by a radiological release from a nuclear power plant nearby. The issue of deferring intervention decisions until additional information is available is addressed. Furthermore, interventions in industrial areas with a concentration of chemical and petrochemical plants form part of this study