“Little Helper” — An Autonomous Industrial Mobile Manipulator Concept

Directory of Open Access Journals (Sweden)

Mads Hvilshøj

2011-06-01

Full Text Available This paper presents the concept “autonomous industrial mobile manipulation” (AIMM based on the mobile manipulator “Little Helper” – an ongoing research project at Aalborg University, Denmark, concerning the development of an autonomous and flexible manufacturing assistant. The paper focuses on the contextual aspects and the working principles of AIMM. Furthermore, the paper deals with the design principles and overall hardware and software architectures of “Little Helper” from a functional and modular mechatronics point of view, in order to create a generic AIMM platform. The design challenges faced in the project is to integrate commercial off-the-shelf (COTS and dedicated highly integrated systems into an autonomous mobile manipulator system with the ability to perform diverse tasks in industrial environments. We propose an action based domain specific communication language for AIMM for routine and task definition, in order to lower the entry barriers for the users of the technology. To demonstrate the “Little Helper” concept a full-scale prototype has been built and different application examples carried out. Experiences and knowledge gained from this show promising results regarding industrial integration, exploitation and maturation of the AIMM technology.

Using Industrial Robots to Manipulate the Measured Object in CMM

Directory of Open Access Journals (Sweden)

Samir Lemes

2013-07-01

Full Text Available Coordinate measuring machines (CMMs are widely used to check dimensions of manufactured parts, especially in the automotive industry. The major obstacles in automation of these measurements are fixturing and clamping assemblies, which are required in order to position the measured object within the CMM. This paper describes how an industrial robot can be used to manipulate the measured object within the CMM work space, in order to enable automation of complex geometry measurement.

Online Learning of Industrial Manipulators' Dynamics Models

DEFF Research Database (Denmark)

Polydoros, Athanasios

2017-01-01

, it was compared with multiple other state-of-the-art machine learning algorithms. Moreover, the thesis presents the application of the proposed learning method on robot control for achieving trajectory execution while learning the inverse dynamics models  on-the-fly . Also it is presented the application...... of the dynamics models. Those mainly derive from physics-based methods and thus they are based on physical properties which are hard to be calculated.  In this thesis, is presented, a novel online machine learning approach  which is able to model both inverse and forward dynamics models of industrial manipulators....... The proposed method belongs to the class of deep learning and exploits the concepts of self-organization, recurrent neural networks and iterative multivariate Bayesian regression. It has been evaluated on multiple datasets captured from industrial robots while they were performing various tasks. Also...

Design and control considerations for industrial and space manipulators

Science.gov (United States)

Whitney, D. E.; Book, W. J.; Lynch, P. M.

1974-01-01

This paper is a progress report summarizing theoretical and practical results concerning integration of design and control aspects of manipulator arms for industrial or space applications. The relationships between task specifications, gross motions, fine motions, actuator type and location, size and strength of structural members, control servos and strategies, and overall design evaluation are briefly discussed, with some technical examples.

An assessment of the risk significance of human errors in selected PSAs and operating events

International Nuclear Information System (INIS)

Palla, R.L. Jr.; El-Bassioni, A.

1991-01-01

Sensitivity studies based on Probabilistic Safety Assessments (PSAs) for a pressurized water reactor and a boiling water reactor are described. In each case human errors modeled in the PSAs were categorized according to such factors as error type, location, timing, and plant personnel involved. Sensitivity studies were then conducted by varying the error rates in each category and evaluating the corresponding change in total core damage frequency and accident sequence frequency. Insights obtained are discussed and reasons for differences in risk sensitivity between plants are explored. A separate investigation into the role of human error in risk-important operating events is also described. This investigation involved the analysis of data from the USNRC Accident Sequence Precursor program to determine the effect of operator-initiated events on accident precursor trends, and to determine whether improved training can be correlated to current trends. The findings of this study are also presented. 5 refs., 15 figs., 1 tab

Direct kinematics solution architectures for industrial robot manipulators: Bit-serial versus parallel

Science.gov (United States)

Lee, J.; Kim, K.

1991-01-01

A Very Large Scale Integration (VLSI) architecture for robot direct kinematic computation suitable for industrial robot manipulators was investigated. The Denavit-Hartenberg transformations are reviewed to exploit a proper processing element, namely an augmented CORDIC. Specifically, two distinct implementations are elaborated on, such as the bit-serial and parallel. Performance of each scheme is analyzed with respect to the time to compute one location of the end-effector of a 6-links manipulator, and the number of transistors required.

Direct kinematics solution architectures for industrial robot manipulators: Bit-serial versus parallel

Science.gov (United States)

Lee, J.; Kim, K.

A Very Large Scale Integration (VLSI) architecture for robot direct kinematic computation suitable for industrial robot manipulators was investigated. The Denavit-Hartenberg transformations are reviewed to exploit a proper processing element, namely an augmented CORDIC. Specifically, two distinct implementations are elaborated on, such as the bit-serial and parallel. Performance of each scheme is analyzed with respect to the time to compute one location of the end-effector of a 6-links manipulator, and the number of transistors required.

Design of safety mechanism for an industrial manipulator based on passive compliance

International Nuclear Information System (INIS)

Kim, Hwi Su; Park, Jung Jun; Song, Jae Bok; Kyung, Jin Ho

2010-01-01

In recent years, collision safety between humans and robots has drawn much attention since human-robot cooperation is increasingly needed in various fields. Since positioning accuracy and collision safety are both important, an industrial manipulator should maintain very high stiffness for positioning accuracy in a normal situation, but exhibit very low stiffness when subjected to a collision force greater than the tolerance for human injury. To satisfy these requirements, we proposed in our previous research a safety mechanism composed of a linear spring and a double-slider mechanism for a service robot with a small payload. We modified this device to meet more stringent requirements for an industrial manipulator which usually has a payload higher than a service robot. Several experiments on static and dynamic collisions showed high stiffness of the safety mechanism in response to an external torque that was less than a predetermined threshold torque, but low stiffness that enabled absorption of the collision force when the external torque exceeded the threshold. Thus, positioning accuracy and collision safety were improved using the proposed design. Furthermore, a new safety criterion is suggested to verify the collision safety of a manipulator that uses the proposed safety mechanism

A Study of Accuracy and Time Delay for Bilateral Master-Slave Industrial Robotic Arm Manipulator System

Directory of Open Access Journals (Sweden)

Mansor Nuratiqa Natrah

2018-01-01

Full Text Available Bilateral master-slave industrial robotic arm manipulator system is an advanced technology used to help human to interact with environments that are unreachable to human, due to its remoteness or perilous. The system has been used in different areas such as tele-surgery, autonomous tele-operation for sea and space operation and handling explosive or high radiation operation fields. It is beneficial both for science and society. Remarkably, the system is not common and generally used in Malaysia. Likewise, the number of research conducted that focused about this technology in our country manufacturing industry are not yet discovered and existent. The implementation of this bilateral manipulator system in an industrial robot could be useful for industrial imminent and development over our country and people, specifically for production yield size and human operative. Hence, the study of bilateral robotic arm manipulator system in an industrial robot and analyzation of its performance and time delay in 3 differ controllers will be discussed to attest the efficiency and its effectiveness on the said design system. The experiment conducted was on KUKA youBot arm in V-Rep simulation with three different controllers (P, PD, PID.

Kinematic parameter calibration method for industrial robot manipulator using the relative position

International Nuclear Information System (INIS)

Ha, In Chul

2008-01-01

A new calibration method for industrial robot system calibration on a manufacturing floor is presented in this paper. To calibrate the robot system, a laser sensor to measure the distance between robot tool and measurement surface is attached to the robot end-effector and a grid is established in the floor. Given two position command pulses for a robot manipulator and using the position difference between two command pulses, the relative position measurement calibration method will find the real robot kinematic parameters. The procedures developed have been applied to an industrial robot. Finally, the effects of the models used to calibrate the robot are discussed. This calibration method represents an effective, low cost and feasible technique for the industrial robot calibration in lab. projects and industrial environments

Characteristics of manipulator for industrial robot with three rotational pairs having parallel axes

Science.gov (United States)

Poteyev, M. I.

1986-01-01

The dynamics of a manipulator with three rotatinal kinematic pairs having parallel axes are analyzed, for application in an industrial robot. The system of Lagrange equations of the second kind, describing the motion of such a mechanism in terms of kinetic energy in generalized coordinates, is reduced to equations of motion in terms of Newton's laws. These are useful not only for either determining the moments of force couples which will produce a prescribed motion or, conversely determining the motion which given force couples will produce but also for solving optimization problems under constraints in both cases and for estimating dynamic errors. As a specific example, a manipulator with all three axes of vertical rotation is considered. The performance of this manipulator, namely the parameters of its motion as functions of time, is compared with that of a manipulator having one rotational and two translational kinematic pairs. Computer aided simulation of their motion on the basis of ideal models, with all three links represented by identical homogeneous bars, has yielded velocity time diagrams which indicate that the manipulator with three rotational pairs is 4.5 times faster.

Soft Robotic Manipulation of Onions and Artichokes in the Food Industry

Directory of Open Access Journals (Sweden)

R. Morales

2014-04-01

Full Text Available This paper presents the development of a robotic solution for a problem of fast manipulation and handling of onions or artichokes in the food industry. The complete solution consists of a parallel robotic manipulatior, a specially designed end-effector based on a customized vacuum suction cup, and a computer vision software developed for pick and place operations. First, the selection and design process of the proposed robotic solution to fit with the initial requeriments is presented, including the customized vacuum suction cup. Then, the kinematic analysis of the parallel manipulator needed to develop the robot control system is reviewed. Moreover, computer vision application is presented inthe paper. Hardware details of the implementation of the building prototype are also shown. Finally, conclusions and future work show the current status of the project.

Lessons learned from international flood PSAS in Korea

International Nuclear Information System (INIS)

Kim, Myungro; Lee, Beomsu; Kang, Sunkoo

1998-01-01

Risk due to internal flooding has been one of the major concerns for the design and operation of nuclear power plants. To reduce the risk from internal flooding, two design approaches for flood protection systems, active and passive, can be considered. The approaches to flood protection design are different for each plant design, and they are highly dependent on the plant type. The flood PSA revealed that the potential plant risk due to a flooding event is highly dependent on the flood design. The major design characteristics are 1) the location of systems that utilize sea water and their impact to other safety related systems, and 2) the existence of emergency overflow paths and an emergency sump which can transfer and accommodate flood water to prevent a significant flooding event. To identify and compare the effectiveness and potential vulnerability of various Korean nuclear power plants' flood designs, the flood PSAs have been performed for three plant designs, such as existing Korean PWR plants, CANDU type PHWR plants, and Korean Standard Nuclear Plants. Based on the evaluation, several design changes were recommended. (author)

Priming effect of antismoking PSAs on smoking behaviour: a pilot study.

Science.gov (United States)

Harris, Jennifer L; Pierce, Melissa; Bargh, John A

2014-07-01

Social marketing is commonly proposed to counteract advertising and other messages that promote unhealthy products. However, public service campaigns can also 'boomerang' or ironically increase the unhealthy behaviours they are designed to discourage. The present study examined whether antismoking public service announcements (PSAs) could increase smoking behaviour immediately following exposure. In an experimental study, 56 smokers were randomly assigned to watch a short television segment with a commercial break that included either (1) a Philip Morris 'QuitAssist' PSA; (2) a Legacy 'truth' antismoking PSA; or (3) a control PSA. Smoking behaviour was assessed during a short break immediately following television viewing. Participants who saw the Philip Morris antismoking PSA were significantly more likely to smoke during a break (42%) compared with participants in the control condition (11%), and participants in the 'truth' condition were marginally more likely to smoke (33%). These differences could not be explained by factors such as mood or level of addiction, and effects occurred outside of participants' conscious awareness. These findings provide preliminary evidence that antismoking campaigns could ironically increase immediate smoking behaviours among smokers. The long-term benefits of proven public health campaigns, including 'truth,' are likely to outweigh any short-term boomerang effects. However, industry-sponsored messages in which companies have an economic incentive to increase consumption behaviours should be treated with scepticism and evaluated independently. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Outline of a Hardware Reconfiguration Framework for Modular Industrial Mobile Manipulators

DEFF Research Database (Denmark)

Schou, Casper; Bøgh, Simon; Madsen, Ole

2014-01-01

This paper presents concepts and ideas of a hard- ware reconfiguration framework for modular industrial mobile manipulators. Mobile manipulators pose a highly flexible pro- duction resource due to their ability to autonomously navigate between workstations. However, due to this high flexibility new...... approaches to the operation of the robots are needed. Reconfig- uring the robot to a new task should be carried out by shop floor operators and, thus, be both quick and intuitive. Late research has already proposed a method for intuitive robot programming. However, this relies on a predetermined hardware...... configuration. Finding a single multi-purpose hardware configuration suited to all tasks is considered unrealistic. As a result, the need for reconfiguration of the hardware is inevitable. In this paper an outline of a framework for making hardware reconfiguration quick and intuitive is presented. Two main...

Autonomous path planning solution for industrial robot manipulator using backpropagation algorithm

Directory of Open Access Journals (Sweden)

PeiJiang Yuan

2015-12-01

Full Text Available Here, we propose an autonomous path planning solution using backpropagation algorithm. The mechanism of movement used by humans in controlling their arms is analyzed and then applied to control a robot manipulator. Autonomous path planning solution is a numerical method. The model of industrial robot manipulator used in this article is a KUKA KR 210 R2700 EXTRA robot. In order to show the performance of the autonomous path planning solution, an experiment validation of path tracking is provided. Experiment validation consists of implementation of the autonomous path planning solution and the control of physical robot. The process of converging to target solution is provided. The mean absolute error of position for tool center point is also analyzed. Comparison between autonomous path planning solution and the numerical methods based on Newton–Raphson algorithm is provided to demonstrate the efficiency and accuracy of the autonomous path planning solution.

Examining the Usefulness of Student-Produced PSAs to Learn Advocacy in a Human Behavior and the Social Environment Course

Science.gov (United States)

Chu, Yee Han; Quinn, Andrew

2018-01-01

Advocacy is a complex set of applications that applies knowledge of human behavior in the social environment to promote the rights of others. The purpose of this study was to explore the usefulness of student-created public service announcements (PSAs) to help BSW students learn cause-based advocacy. Our results suggest that assigning a PSA…

Manual on reliability data collection for research reactor PSAs

Energy Technology Data Exchange (ETDEWEB)

1992-01-01

The IAEA has been actively promoting performance of probabilistic safety assessment (PSA) studies for research reactors. From 1986 to 1988 the IAEA undertook a Coordinated Research Programme (CRP) on PSA for research reactors which helped promote use of PSA and foster a broad exchange of information. Although the basic methodological approach in performing a research reactor PSA is understood, some unresolved issues, data availability being among them, still exist. To address the issue on the international level, the IAEA initiated a new CRP on ``Data Acquisition for Research Reactors PSA Studies``. The aim of the CRP is to develop a data collection system and generate research reactor specific reliability data for use in PSAs. The achieve this aim a set of precise definitions should be adopted. A set of definitions developed specifically for research reactors and covering classification of equipment and failure terms, reliability parameters, failure modes and other terms necessary for data collection and processing is presented in this document which is based on discussions during the first meeting of the CRP held in Vienna in October 1989 and during the second meeting held in Beijing, China, in October 1990. Refs and figs.

Manual on reliability data collection for research reactor PSAs

International Nuclear Information System (INIS)

1992-01-01

The IAEA has been actively promoting performance of probabilistic safety assessment (PSA) studies for research reactors. From 1986 to 1988 the IAEA undertook a Coordinated Research Programme (CRP) on PSA for research reactors which helped promote use of PSA and foster a broad exchange of information. Although the basic methodological approach in performing a research reactor PSA is understood, some unresolved issues, data availability being among them, still exist. To address the issue on the international level, the IAEA initiated a new CRP on ''Data Acquisition for Research Reactors PSA Studies''. The aim of the CRP is to develop a data collection system and generate research reactor specific reliability data for use in PSAs. The achieve this aim a set of precise definitions should be adopted. A set of definitions developed specifically for research reactors and covering classification of equipment and failure terms, reliability parameters, failure modes and other terms necessary for data collection and processing is presented in this document which is based on discussions during the first meeting of the CRP held in Vienna in October 1989 and during the second meeting held in Beijing, China, in October 1990. Refs and figs

Autonomous Industrial Mobile Manipulation (AIMM) - Maturation, Exploitation and Implementation

DEFF Research Database (Denmark)

Bøgh, Simon

) "Little Helper" is introduced, a manufacturing assistant inspired by the Walt Disney character. The main rationale of the AIMM concept is a compromise between traditional automation (efficiency) and manual labor (flexibility), which contributes to realizing transformable manufacturing systems. From...... a state-of-the-art review, it is observed that implementations of mobile manipulators in industry have been limited although the needs for flexible automation are present. The second topic is “Identifying skills for AIMM robots” and is dedicated to defining a unifying terminology for task......-level programming by means of skills with focus on the identification of skills for AIMM robots. The terminology is built as a hierarchy similar to that of human action modeling (e.g. actions and activities) or human language (e.g. words and sentences). Two approaches are applied for identifying relevant skills...

Manipulators in teleoperation

International Nuclear Information System (INIS)

Hamel, W.R.

1985-01-01

Teleoperated manipulators represent a mature technology which has evolved over nearly 40 years of applications experience. The wide range of manipulator concepts developed thus far reflect differing applications, priorities, and philosophies. The technology of teleoperated manipulators is in a rapid state of change (just as are industrial robotics) fueled by microelectronics and materials advances. Large strides in performance and dexterity are now practical and advantageous. Even though improved controls and sensory feedback will increase functionality, overall costs should be reduced as manipulator fabrication and assembly labor costs are reduced through improved manufacturing technology. As these advances begin to materialize, broader applications in nonnuclear areas should occur

Using Novel 2D Image Manipulation Methods to Aid Initial Concept Generation with Postgraduate Industrial Design Students

Science.gov (United States)

Hurn, Karl; Storer, Ian

2015-01-01

The aim of this paper is to provide educators and industrial design professionals with an insight into the development of innovative design ideation images manipulation techniques and, highlight how these techniques could be used to not only improve student ideation skills, but also as design enablers for a broader range of professionals working…

Manipulator techniques and problems of their application in primary circuit maintenance

International Nuclear Information System (INIS)

Kertscher, F.; Popp, P.

1985-01-01

The fundamental structure and specifications of manipulators (in particular of industrial robots) are presented in order to derive the application conditions and fields for manipulators in primary circuit maintenance. The necessity of applying process-specific manipulator technique in the primary circuit maintenance is based on nuclear safety requirements and on decreasing of the radiation exposure of maintenance personnel. Synchronous manipulators and industrial robots are the types of manipulators used in materials testing, repairing and scrapping. The technical requirements of manipulators are discussed

Real-time networked control of an industrial robot manipulator via discrete-time second-order sliding modes

Science.gov (United States)

Massimiliano Capisani, Luca; Facchinetti, Tullio; Ferrara, Antonella

2010-08-01

This article presents the networked control of a robotic anthropomorphic manipulator based on a second-order sliding mode technique, where the control objective is to track a desired trajectory for the manipulator. The adopted control scheme allows an easy and effective distribution of the control algorithm over two networked machines. While the predictability of real-time tasks execution is achieved by the Soft Hard Real-Time Kernel (S.Ha.R.K.) real-time operating system, the communication is established via a standard Ethernet network. The performances of the control system are evaluated under different experimental system configurations using, to perform the experiments, a COMAU SMART3-S2 industrial robot, and the results are analysed to put into evidence the robustness of the proposed approach against possible network delays, packet losses and unmodelled effects.

Lazy motion planning for robotic manipulators

NARCIS (Netherlands)

Andrien, A.R.P.; van de Molengraft, M.J.G.; Bruyninckx, H.P.J.

2017-01-01

Robotic manipulators are making a shift towards mobile bases in both industry and domestic environments, which puts high demands on efficient use of the robot’s limited energy resources. In this work, the problem of reducing energy usage of a robot manipulator during a task is investigated. We

Manipulator comparative testing program

International Nuclear Information System (INIS)

Draper, J.V.; Handel, S.J.; Sundstrom, E.; Herndon, J.N.; Fujita, Y.; Maeda, M.

1986-01-01

The Manipulator Comparative Testing Program examined differences among manipulator systems from the United States and Japan. The manipulator systems included the Meidensha BILARM 83A, the Model M-2 of Central Research Laboratories Division of Sargent Industries (CRL), and the GCA Corporation PaR Systems Model 6000. The site of testing was the Remote Operations Maintenance Demonstration (ROMD) facility, operated by the Fuel Recycle Division in the Consolidated Fuel Reprocessing Program at the Oak Ridge National Laboratory (ORNL). In all stages of testing, operators using the CRL Model M-2 manipulator had consistently lower times to completion and error rates than they did using other machines. Performance was second best with the Meidensha BILARM 83A in master-slave mode. Performance with the BILARM in switchbox mode and the PaR 6000 manipulator was approximately equivalent in terms of criteria recorded in testing. These data show no impact of force reflection on task performance

Manipulation in Industrialized Meat Products | Manipulação em produtos de carne industrializados

Directory of Open Access Journals (Sweden)

Neide Kazue Sakugawa Shinohara

2017-06-01

Full Text Available Super and hypermarkets commercialize a wide variety of foods of animal origin and its derivatives, acquired by the population as an important source of proteins. The adoption of Good Manufacturing Practices (GMP in distribution networks and in commercialization represents an important tool to guarantee the quality of food, especially in the segment of processed meat products, due to its perishability. The objective of this study was to evaluate the application of good practices in the manipulation environment of animal products in supermarkets in the Metropolitan Region of Recife (RMR. The methodology used was the quantitative survey and action research during 30 days, with application of checklist regarding the handling and packaging of meat products with employees and managers of eight different companies of the retail network. The most frequently found nonconformities were deficiency in porting and the maintenance of the cold chain, visible microbial deterioration and packaging in unhealthy conditions, which may evolve into food-borne outbreaks. Therefore, it is necessary to constantly monitor BPM through regular training with the manipulators and employees, to ensure the correct execution of the activities and thus to commercialize industrialized meat products safely.

Thermally stable, transparent, pressure-sensitive adhesives from epoxidized and dihydroxyl soybean oil.

Science.gov (United States)

Ahn, B Kollbe; Kraft, Stefan; Wang, D; Sun, X Susan

2011-05-09

Thermal stability and optical transparency are important factors for flexible electronics and heat-related applications of pressure-sensitive adhesives (PSAs). However, current acryl- and rubber-based PSAs cannot attain the required thermal stability, and silicon-based PSAs are much more expensive than the alternatives. Oleo-chemicals including functionalized plant oils have great potential to replace petrochemicals. In this study, novel biobased PSAs from soybean oils were developed with excellent thermal stability and transparency as well as peel strength comparable to current PSAs. In addition, the fast curing (drying) property of newly developed biobased PSAs is essential for industrial applications. The results show that soybean oil-based PSA films and tapes have great potential to replace petro-based PSAs for a broad range of applications including flexible electronics and medical devices because of their thermal stability, transparency, chemical resistance, and potential biodegradability from triglycerides.

Design and Modelling of Distributed Industrial Manipulation System with Wireless Operated Moving Manipulation

Czech Academy of Sciences Publication Activity Database

Belda, Květoslav; Píša, P.

2015-01-01

Roč. 4, č. 3 (2015), s. 69-75 ISSN 1805-3386 Institutional support: RVO:67985556 Keywords : Manipulation system * wireless communication * distributed systems * production lines * physical modelling * DC motors * robotic s Subject RIV: BC - Control Systems Theory http://library.utia.cas.cz/separaty/2015/AS/belda-0448098.pdf

Computational simulator of robotic manipulators

International Nuclear Information System (INIS)

Leal, Alexandre S.; Campos, Tarcisio P.R.

1995-01-01

Robotic application for industrial plants is discussed and a computational model for a mechanical manipulator of three links is presented. A neural network feed-forward type has been used to model the dynamic control of the manipulator. A graphic interface was developed in C programming language as a virtual world in order to visualize and simulate the arm movements handling radioactive waste environment. (author). 7 refs, 5 figs

SAMSIN: the next-generation servo-manipulator

International Nuclear Information System (INIS)

Adams, R.H.; Jennrich, C.E.; Korpi, K.W.

1985-01-01

The Central Research Laboratories (CRL) Division of Sargent Industries is now developing SAMSIN, a next-generation servo-manipulator. SAMSIN is an acronym for Servo-Actuated Manipulator Systems with Intelligent Networks. This paper discusses the objectives of this development and describes the key features of the servo-manipulator system. There are three main objectives in the SAMSIN development: adaptability, reliability, and maintainability. SAMSIN utilizes standard Sargent/CRL sealed master and slave manipulator arms as well as newly developed compact versions. The mechanical arms have more than 20 yr of successful performance in industrial applications such as hot cells, high vacuums, fuel pools, and explosives handling. The servo-actuator package is in a protective enclosure, which may be sealed in various ways from the remote environment. The force limiting characteristics of the servo-actuators extend motion tendon life. Protective bootings increase the reliability of the arms in an environment that is high in airborne contamination. These bootings also simplify the decontamination of the system. The modularity in construction permits quick removal and replacement of slave arms, wrist joints, tong fingers, and actuator packages for maintenance. SAMSIN utilizes readily available off-the-shelf actuator and control system components. Each manipulator motion uses the same actuator and control system components

Do Managers Manipulate Earnings Prior to Management Buyouts?

NARCIS (Netherlands)

Mao, Y.; Renneboog, L.D.R.

2013-01-01

Abstract: To address the question as to whether managers manipulate accounting numbers downwards prior to management buyouts (MBOs), we implement an industry-adjusted buyout-specific approach and receive an affirmative answer. In UK buyout companies, negative earnings manipulation (understating the

Collision Detection for Underwater ROV Manipulator Systems

Directory of Open Access Journals (Sweden)

Satja Sivčev

2018-04-01

Full Text Available Work-class ROVs equipped with robotic manipulators are extensively used for subsea intervention operations. Manipulators are teleoperated by human pilots relying on visual feedback from the worksite. Operating in a remote environment, with limited pilot perception and poor visibility, manipulator collisions which may cause significant damage are likely to happen. This paper presents a real-time collision detection algorithm for marine robotic manipulation. The proposed collision detection mechanism is developed, integrated into a commercial ROV manipulator control system, and successfully evaluated in simulations and experimental setup using a real industry standard underwater manipulator. The presented collision sensing solution has a potential to be a useful pilot assisting tool that can reduce the task load, operational time, and costs of subsea inspection, repair, and maintenance operations.

Experimental determination of frequency response function estimates for flexible joint industrial manipulators with serial kinematics

Science.gov (United States)

Saupe, Florian; Knoblach, Andreas

2015-02-01

Two different approaches for the determination of frequency response functions (FRFs) are used for the non-parametric closed loop identification of a flexible joint industrial manipulator with serial kinematics. The two applied experiment designs are based on low power multisine and high power chirp excitations. The main challenge is to eliminate disturbances of the FRF estimates caused by the numerous nonlinearities of the robot. For the experiment design based on chirp excitations, a simple iterative procedure is proposed which allows exploiting the good crest factor of chirp signals in a closed loop setup. An interesting synergy of the two approaches, beyond validation purposes, is pointed out.

WORKSPACE DRAWING FROM A MANIPULATOR ARM WITH 6 DOF

Directory of Open Access Journals (Sweden)

NAIDIN Gigi

2011-06-01

Full Text Available Modelling and simulation is an important aspect in robotic field. Knowing of the workspace is very important to the operation of manipulators arm. This paper investigates operational performance of space manipulator arm destined for industrial manufacturing, by defining and analyzing their workspace and manipulability measure. The authors show that manipulator arm developing requires the consideration of more efficient dynamic models and use of dedicated processing techniques such as Autodesk-Inventor 9, MATLAB, WorkSpace software.

Lessons learnt form PSAS for new and advanced reactors in Russia

International Nuclear Information System (INIS)

Morozov, V.; Tokmachev, G.

2012-01-01

The Atomenergoproekt company has been performing probabilistic safety assessments (PSA) for six nuclear power plants (NPP) in design. They belong to different plant generations constructed or planned to construct in Russia, Iran, India, Turkey and Bulgaria including Generation 3+ plants. Now a PSA for a Generation 4 plant is started. The plants have new inherent safety features that are addressed in terms of their influence on PSA development. The paper is aimed at sharing some issues and experience gained from the PSA development for new and advanced plants. First of all, Customer requirements to probabilistic safety targets are usually stronger than existing Regulatory or IAEA ones. It appears that industry takes the lead over regulation in this case and forces the designer to find and implement appropriate means to enhance safety, which sometimes have no reference to practical experience. On the other hand, regulatory documents and the existing PSA methodology are mainly oriented to operating plants. This creates problems when developing a PSA as well as performing regulatory reviews. Secondly, the scope of the PSA may be different depending on a design stage such as the development conceptual, basic or detailed design. In addition, the base case PSA is usually performed for NPP in design. However, a customer may require additional PSA applications to consider, for instance, risk monitoring. In this case the scope of the PSA should be extended to implement special attributes of the application needed that often requires specific information not available at the design stage. Thirdly, lack of design information affecting PSA development may be associated with incompleteness of the design that is typical for interim design stages and communication problems caused by the involvement of many different companies in the deign activity. To deal with this issue bounding technologies and the iterative PSA development are used. However this sometimes contradicts to the

Hydraulic manipulator

International Nuclear Information System (INIS)

Sinha, A.K.; Srikrishnamurty, G.

1990-01-01

Successful operation of nuclear plant is largely dependent on safe handling of radio-active material. In order to reduce this handling problem and minimise the exposure of radiation, various handling equipment and manipulators have been developed according to the requirements. Manufacture of nuclear fuel, which is the most important part of the nuclear industry, involves handling of uranium ingots weighing approximately 250 kg. This paper describes a specially designed hydraulic manipulator for handling of the ingots in a limited space. It was designed to grab and handle the ingots in any position. This has following drive motions: (1)gripping and releasing, (2)lifting and lowering (z-motion), (3)rotation about the horizontal axis (azimuth drive), (4)rotation about the job axis, and (5)rotation about the vertical axis. For horizontal motion (X and Y axis motion) this equipment is mounted on a motorised trolley, so that it can move inside the workshop. For all drives except the rotation about the job axis, hydraulic cylinders have been used with a battery operated power pack. Trolley drive is also given power from same battery. This paper describes the design aspects of this manipulator. (author). 4 figs

Eye-in-Hand Manipulation for Remote Handling: Experimental Setup

Science.gov (United States)

Niu, Longchuan; Suominen, Olli; Aref, Mohammad M.; Mattila, Jouni; Ruiz, Emilio; Esque, Salvador

2018-03-01

A prototype for eye-in-hand manipulation in the context of remote handling in the International Thermonuclear Experimental Reactor (ITER)1 is presented in this paper. The setup consists of an industrial robot manipulator with a modified open control architecture and equipped with a pair of stereoscopic cameras, a force/torque sensor, and pneumatic tools. It is controlled through a haptic device in a mock-up environment. The industrial robot controller has been replaced by a single industrial PC running Xenomai that has a real-time connection to both the robot controller and another Linux PC running as the controller for the haptic device. The new remote handling control environment enables further development of advanced control schemes for autonomous and semi-autonomous manipulation tasks. This setup benefits from a stereovision system for accurate tracking of the target objects with irregular shapes. The overall environmental setup successfully demonstrates the required robustness and precision that remote handling tasks need.

Key Design Requirements for Long-Reach Manipulators

Energy Technology Data Exchange (ETDEWEB)

Kwon, D.S.

2001-01-01

Long-reach manipulators differ from industrial robots and teleoperators typically used in the nuclear industry in that the aspect ratio (length to diameter) of links is much greater and link flexibility, as well as joint or drive train flexibility, is likely to be significant. Long-reach manipulators will be required for a variety of applications in the Environmental Restoration and Waste Management Program. While each application will present specific functional, kinematic, and performance requirements, an approach for determining the kinematic applicability and performance characteristics is presented, with a focus on waste storage tank remediation. Requirements are identified, kinematic configurations are considered, and a parametric study of link design parameters and their effects on performance characteristics is presented.

Key design requirements for long-reach manipulators

International Nuclear Information System (INIS)

Kwon, D.S.; March-Leuba, S.; Babcock, S.M.; Hamel, W.R.

1993-09-01

Long-reach manipulators differ from industrial robots and teleoperators typically used in the nuclear industry in that the aspect ratio (length to diameter) of links is much greater and link flexibility, as well as joint or drive train flexibility, is likely to be significant. Long-reach manipulators will be required for a variety of applications in the Environmental Restoration and Waste Management Program. While each application will present specific functional kinematic, and performance requirements an approach for determining the kinematic applicability and performance characteristics is presented, with a focus on waste storage tank remediation. Requirements are identified, kinematic configurations are considered, and a parametric study of link design parameters and their effects on performance characteristics is presented

Key Design Requirements for Long-Reach Manipulators

International Nuclear Information System (INIS)

Kwon, D.S.

2001-01-01

Long-reach manipulators differ from industrial robots and teleoperators typically used in the nuclear industry in that the aspect ratio (length to diameter) of links is much greater and link flexibility, as well as joint or drive train flexibility, is likely to be significant. Long-reach manipulators will be required for a variety of applications in the Environmental Restoration and Waste Management Program. While each application will present specific functional, kinematic, and performance requirements, an approach for determining the kinematic applicability and performance characteristics is presented, with a focus on waste storage tank remediation. Requirements are identified, kinematic configurations are considered, and a parametric study of link design parameters and their effects on performance characteristics is presented

Manipulator vehicles and loading shovels

International Nuclear Information System (INIS)

Brudermueller, G.; Krueger, W.

1992-01-01

Kerntechnische Hilfsdienst GmbH (KHG) is an institution jointly founded by electricity utilities, fuel cycle industries, and national research centers to provide specialist equipment for removing the consequences of accidents inside plants and recognizing damage in the immediate vicinity of such plants, maintain such equipment in an operational condition, and provide personnel instructed in work of this kind. The specialized technical equipment developed includes carriages, carrier vehicles for manipulators, grabs, TV cameras or measuring gear. In addition to manipulator vehicles, especially loading shovels are used. Radio-controlled vehicles are used where cable operation is either not reliable enough or has failed. (orig.) [de

Parametric Synthesis of Automatic Control System of Industrial Robot Manipulator in Compliance with Requirements of Robust Quality

Directory of Open Access Journals (Sweden)

A. A. Nesenchuk

2004-01-01

Full Text Available The paper considers an application of a root-locus method for synthesis of dynamic systems with uncertainty that meet the requirements of pre-set quality. This method is used for parametric synthesis of automatic control system of industrial robot manipulator that is used for transportation of engineering products. The synthesis takes place under conditions of substantial changes in inertia moment of robot load. As a result of investigations it is possible to determine range of values of variable parameter that ensures the required quality of control system operation. A system of computer programs has been developed in order to solve the problem.

Approaches to probabilistic model learning for mobile manipulation robots

CERN Document Server

Sturm, Jürgen

2013-01-01

Mobile manipulation robots are envisioned to provide many useful services both in domestic environments as well as in the industrial context. Examples include domestic service robots that implement large parts of the housework, and versatile industrial assistants that provide automation, transportation, inspection, and monitoring services. The challenge in these applications is that the robots have to function under changing, real-world conditions, be able to deal with considerable amounts of noise and uncertainty, and operate without the supervision of an expert. This book presents novel learning techniques that enable mobile manipulation robots, i.e., mobile platforms with one or more robotic manipulators, to autonomously adapt to new or changing situations. The approaches presented in this book cover the following topics: (1) learning the robot's kinematic structure and properties using actuation and visual feedback, (2) learning about articulated objects in the environment in which the robot is operating,...

Tobacco industry manipulation of the hospitality industry to maintain smoking in public places

Science.gov (United States)

Dearlove, J; Bialous, S; Glantz, S

2002-01-01

Objective: To describe how the tobacco industry used the "accommodation" message to mount an aggressive and effective worldwide campaign to recruit hospitality associations, such as restaurant associations, to serve as the tobacco industry's surrogate in fighting against smoke-free environments. Methods: We analysed tobacco industry documents publicly available on the internet as a result of litigation in the USA. Documents were accessed between January and November 2001. Results: The tobacco industry, led by Philip Morris, made financial contributions to existing hospitality associations or, when it did not find an association willing to work for tobacco interests, created its own "association" in order to prevent the growth of smoke-free environments. The industry also used hospitality associations as a vehicle for programmes promoting "accommodation" of smokers and non-smokers, which ignore the health risks of second hand smoke for employees and patrons of hospitality venues. Conclusion: Through the myth of lost profits, the tobacco industry has fooled the hospitality industry into embracing expensive ventilation equipment, while in reality 100% smoke-free laws have been shown to have no effect on business revenues, or even to improve them. The tobacco industry has effectively turned the hospitality industry into its de facto lobbying arm on clean indoor air. Public health advocates need to understand that, with rare exceptions, when they talk to organised restaurant associations they are effectively talking to the tobacco industry and must act accordingly. PMID:12034999

Manipulation of biological samples using micro and nano techniques.

Science.gov (United States)

Castillo, Jaime; Dimaki, Maria; Svendsen, Winnie Edith

2009-01-01

The constant interest in handling, integrating and understanding biological systems of interest for the biomedical field, the pharmaceutical industry and the biomaterial researchers demand the use of techniques that allow the manipulation of biological samples causing minimal or no damage to their natural structure. Thanks to the advances in micro- and nanofabrication during the last decades several manipulation techniques offer us the possibility to image, characterize and manipulate biological material in a controlled way. Using these techniques the integration of biomaterials with remarkable properties with physical transducers has been possible, giving rise to new and highly sensitive biosensing devices. This article reviews the different techniques available to manipulate and integrate biological materials in a controlled manner either by sliding them along a surface (2-D manipulation), by grapping them and moving them to a new position (3-D manipulation), or by manipulating and relocating them applying external forces. The advantages and drawbacks are mentioned together with examples that reflect the state of the art of manipulation techniques for biological samples (171 references).

Manipulator systems for nuclear reactor decommissioning which can take end effectors

International Nuclear Information System (INIS)

Lampersberger, E.; Hell, W.; Vrba, H.

1995-01-01

The development of a remote-handling system on the basis of the new master-slave manipulator will decisively influence the possibilities of remote-controlled manipulation in nuclear technology under the premises of -high availability - universal range of application - a standard normal for industry - maintenance friendlyness. (orig.) [de

VIBRATION REDUCTION ON SINGLE-LINK FLEXIBLE MANIPULATOR USING H∞ CONTROL

Directory of Open Access Journals (Sweden)

Roberd Saragih

2012-06-01

Full Text Available This paper is concerned with the vibration and position control of a single link flexible manipulator. Robot link manipulators are widely used in various industrial applications. It is desirable to build light weight flexible manipulators. Light flexible manipulators have a variety of applications, most significantly in space exploration,manufacturing automation, construction, mining, and hazardous operation. Timoshenko beam theory is used to derive mathematical model of a flexible manipulator. The dynamic equations of motion are obtained using the Lagrange's formulation of dynamics.The H∞ controller is designed for vibration and position control of the system. Simulations are presented and show that vibration and position control of a single flexible link can be controlled with the designed H∞ controller.

Text Manipulation Techniques and Foreign Language Composition.

Science.gov (United States)

Walker, Ronald W.

1982-01-01

Discusses an approach to teaching second language composition which emphasizes (1) careful analysis of model texts from a limited, but well-defined perspective and (2) the application of text manipulation techniques developed by the word processing industry to student compositions. (EKN)

Dual-arm manipulation module for use in decontamination and decommissioning operations

International Nuclear Information System (INIS)

Hamel, W.R.; Haley, D.C.; Dixon, W.E.

1994-01-01

A dual-arm manipulation module is under development for application in decontamination and decommissioning (D ampersand D) tasks. The development is led by Oak Ridge National Laboratory with support from Sandia National Laboratories, and with university and industry participation. The project is part of the Robotics Technology Development Program funded by the US Department of Energy, Environmental Restoration and Waste Management, Office of Technology Development. The dual-arm module is designed to provide dexterous manipulation capability for remote characterization, decontamination, and dismantlement operations, and the module is reconfigurable to meet various deployment requirements. Remote manipulation capability can benefit D ampersand D activities through reduced worker exposure to both contaminant and industrial hazards. When tasks conditions permit, increased use of robotic features reduce costs by increased efficiency of operation

Sistem kontrol gerak kinematika robot gripper manipulator

Directory of Open Access Journals (Sweden)

Wayan Widhiada

2018-01-01

Full Text Available Abstrak Sistem robot manipulator ini merupakan mekanisme lengan yang terdiri dari serangkaian segmen yang digunakan untuk menangkap dan memindahkan benda dengan beberapa derajat kebebasan. Dalam perkembangannya, robot manipulator telah digunakan dalam melaksanakan misi tertentu dan membantu operasi di ruang angkasa. Robot biasanya berinteraksi dengan sistem tangan, dan dalam kegiatan industri tangan biasanya disebut sebagai gripper. Penulis menggunakan metode simulasi teknik yang dapat menentukan sistem gerak kinematika robot. Simulasi teknik adalah metode yang digunakan untuk mendesain dan menganalisa gerakan robot dimana hasil dari respon gerakan robot yang didapat mendekati hasil dalam keadaan sebenarnya. Simulasi juga dapat menghemat waktu dan biaya yang digunakan dalam mendesain robot gripper manipulator lima jari dengan elemen prismatik. Dengan menggunakan kontrol PID diharapkan respon gerak kinematik dari setiap joint robot manipulator mencapai perfomance yang terbaik seperti overshoot yang kecil, dan kondisi tenang (steady state dalam waktu yang singkat disertai dengan keselahan penggerak yang kecil. Melalui proses Advance tuning pada PID kontrol selesai didapatkan parameter penguat pada PID kontrol yaitu Kp = 0.7194, Ki = 8.306 dan Kd = 0.0061sehingga tercapai performance gerakan kinematika robot gripper manipulator yang terbaik sesuai yang dikehendaki oleh user dengan rise time yang singkat 0.52 detik, waktu puncak yang singkat 0.52 detik, maksimum overshoot yang kecil 1,8%, kesetebailan response dicapai pada 0.76 detik dan kesalahan penggerak yang sangat kecil 0.32%. Kata kunci: Robot gripper manipulator, PID control, gerakan kinematika Abstract A robot gripper manipulator system mechanism comprising a series of segments that are used to capture and move objects with multiple degrees of freedom. In the process, the robot manipulator has been used in carrying out the specific mission and assist operations in space. Robot manipulator

The price paid: manipulation of otolaryngologists by the tobacco industry to obfuscate the emerging truth that smoking causes cancer.

Science.gov (United States)

Jackler, Robert K; Samji, Hussein A

2012-01-01

Our objectives were to explore the multifaceted campaign by the tobacco industry to enlist otolaryngologists in support of their efforts to reassure consumers that cigarettes were safe, and to elucidate the incentives that led so many leading otolaryngologists to give testimony denying a causal linkage between tobacco use and head and neck cancer. Historical analyses. Recent litigation has exposed for public viewing a huge trove of internal tobacco industry documents. These documents include correspondence files, internal memoranda, research solicitations, grant agreements, records of payments, marketing plans, and testimony by otolaryngologists on behalf of tobacco interests in court proceedings, before congressional committees, and at U.S. Federal Trade Commission hearings. Evidence shows that marketing divisions of major tobacco companies systematically sought to use the authority and prestige of otolaryngologists to support their promotional efforts. Industry documents reveal widespread collaboration by leaders in the field through conducting research and giving well-compensated testimony favorable to tobacco interests. Invariably, industry-funded research showed tobacco in a favorable light. The industry also sought to influence otolaryngologists with free cigarettes, elegant dinners, and hospitality booths at conventions. In revealing this unfortunate period in our history, we by no means intend to diminish the memory of distinguished leaders whose tobacco involvements were certainly more acceptable by the standards of their own time. Rather, by exposing the pervasive tobacco industry manipulation of scientific research for commercial purposes we seek to encourage vigilance by contemporary researchers who might consider seeking funding from an industry that places the pursuit of profits above the well-being of its customers. Copyright © 2011 The American Laryngological, Rhinological, and Otological Society, Inc.

Using a Didactic Manipulator in Mechatronics and Industrial Engineering Courses

Science.gov (United States)

Stankovski, Stevan; Tarjan, Laslo; Skrinjar, Dragana; Ostojic, Gordana; Senk, Ivana

2010-01-01

One of the most difficult and most important engineering tasks is the integration of a robot-manipulator into material handling, assembly, and production processes, offering the possibility of supervision and control. The knowledge and skills required for these kinds of tasks are purely mechatronic and, thus, multidisciplinary. This paper…

Genetic manipulations in aquaculture: a review of stock improvement by classical and modern technologies.

Science.gov (United States)

Hulata, G

2001-01-01

The aim of this review was to highlight the extent to which the genetic technologies are implemented by the aquaculture industry. The review shows that some of the modern genetic technologies are already extensively applied by the diverse aquaculture industries, though not to the same extent for all important aquacultured species (according to FAO 1998 figures). Some species (common carp, Atlantic salmon, rainbow trout, channel catfish, Nile tilapia, and the Pacific oyster) received concentrated breeding efforts, while other major cultured species (Chinese and Indian carps and the giant tiger shrimp) received, so far, relatively limited attention, and a few species (Yesso scallop, blue mussel, white Amur bream, and milkfish) have, apparently, not been genetically improved at all. Most of the genetically improved strains reaching the aquaculture industry were developed through traditional selective breeding (selection, crossbreeding, and hybridization). Emerging, more modern technologies for genetic manipulation seem to take 10-20 years from being established experimentally until applications affect the industry. Thus, chromosome-set and sex manipulations started to affect the industry during the 1980's and 1990's. DNA marker technology and gene manipulations have yet hardly affected the industry. The former have not matured yet, but hold much promise. The latter could have affected the industry already had it not been restricted by public concern.

Kinematics at the Main Mechanism of a Railbound Forging Manipulator

Directory of Open Access Journals (Sweden)

Florian Ion Tiberiu Petrescu

2015-09-01

Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Heavy payload forging manipulators are mainly characterized by large load output and large capacitive load input. The relationship between outputs and inputs will greatly influence the control and the reliability. Forging manipulators have become more prevalent in the industry today. They are used to manipulate objects to be forged. The most common forging manipulators are moving on a railway to have a greater precision and stability. They have been called the railbound forging manipulators. In this paper we analyze the general kinematics of the main mechanism from a such manipulator. Kinematic scheme shows a typical forging manipulator, with the basic motions in operation process: walking, motion of the tong and buffering. The lifting mechanism consists of several parts including linkages, hydraulic drives and motion pairs. The principle of type design from the viewpoints of the relationship between output characteristics and actuator inputs is discussed. An idea of establishing the incidence relationship between output characteristics and actuator inputs is proposed. These novel forging manipulators which satisfy certain functional requirements provide an effective help for the design of forging manipulators.

Efficient dynamic modeling of manipulators containing closed kinematic loops

Science.gov (United States)

Ferretti, Gianni; Rocco, Paolo

An approach to efficiently solve the forward dynamics problem for manipulators containing closed chains is proposed. The two main distinctive features of this approach are: the dynamics of the equivalent open loop tree structures (any closed loop can be in general modeled by imposing some additional kinematic constraints to a suitable tree structure) is computed through an efficient Newton Euler formulation; the constraint equations relative to the most commonly adopted closed chains in industrial manipulators are explicitly solved, thus, overcoming the redundancy of Lagrange's multipliers method while avoiding the inefficiency due to a numerical solution of the implicit constraint equations. The constraint equations considered for an explicit solution are those imposed by articulated gear mechanisms and planar closed chains (pantograph type structures). Articulated gear mechanisms are actually used in all industrial robots to transmit motion from actuators to links, while planar closed chains are usefully employed to increase the stiffness of the manipulators and their load capacity, as well to reduce the kinematic coupling of joint axes. The accuracy and the efficiency of the proposed approach are shown through a simulation test.

Industrial Robots.

Science.gov (United States)

Reed, Dean; Harden, Thomas K.

Robots are mechanical devices that can be programmed to perform some task of manipulation or locomotion under automatic control. This paper discusses: (1) early developments of the robotics industry in the United States; (2) the present structure of the industry; (3) noneconomic factors related to the use of robots; (4) labor considerations…

The Ethics/ Skills Interface in Image Manipulation

Directory of Open Access Journals (Sweden)

Jenny Webber

2000-05-01

Full Text Available Image manipulation using computer technology has become a basic skill required in various graphics dependent industries such as advertising, and the print and electronic media, and for specialist use in institutions for in-house and on-line publishing and the creation of Web pages. The 'seamless' alteration of photographs and other visual images made possible by computer technology has allowed misrepresentation with intent to deceive, and difficulty in establishing copyright of original images. The dilemma in teaching techniques of image manipulation is to create a basis for ethical practice HCI in this paper refers to the ethics/skills interface in the education and work of multimedia practitioners.

A world first. Industrial operation of computer-aided master-slave manipulator at the La Hague recycling plant

International Nuclear Information System (INIS)

Brueziere, Jerome; Thro, Jean Francois; Brudieu, Marie-Anne; Piolain, Gerard; Geffard, Franck; Garrec, Philippe; Measson, Yvan; Coudray, Alain; Lelann, Eric

2011-01-01

Since the beginning of industrial nuclear plants like recycling, mechanical master-slave manipulators have been widely used for operation and maintenance in hot cells, in conjunction with shielding windows. In the La Hague plant for instance, all hot cells where maintenance is or could be required are fitted with shielding windows and through-wall telescopic master-slave manipulators. This well mastered solution, if used by highly skilled workers, has demonstrated its capability to perform all the maintenance tasks required, as long as equipment and tools inside the cell were designed accordingly. However, this technology has also shown significant limitations in terms of capacity, flexibility, efficiency and reliability. In order to improve those characteristics, AREVA and CEA have developed together a new technology: computer-aided master-slave manipulators. By replacing the traditional mechanical link, between the 'slave arm' in the cell and the 'master arm', with motors, sensors and electronics, this new tool improves load capacity and provides added flexibility and efficiency, while protecting the slave arm from overload and therefore improving reliability. In addition, this new device was developed to be fully compatible with current La Hague configuration. After developing and testing this solution in realistic but inactive environment, by performing all kinds of operation and maintenance activities with trained workers, the first generation tool was improved by incorporating feed-back and suggestions from operators. Second generation system was then developed, and first introduced in 2010 in an active cell of the La Hague plant, namely a vitrification cell. After a few months in operation, feedback from manufacturing staff was so positive that implementation of several new arms was decided for 2011. This paper will describe how this development benefited from the existing know-how and component library jointly developed by AREVA and CEA, as well as the main

Positioning the laparoscopic camera with industrial robot arm

DEFF Research Database (Denmark)

Capolei, Marie Claire; Wu, Haiyan; Andersen, Nils Axel

2017-01-01

This paper introduces a solution for the movement control of the laparoscopic camera employing a teleoperated robotic assistant. The project propose an autonomous robotic solution based on an industrial manipulator, provided with a modular software which is applicable to large scale. The robot arm...... industrial robot arm is designated to accomplish this manipulation task. The software is implemented in ROS in order to facilitate future extensions. The experimental results shows a manipulator capable of moving fast and smoothly the surgical tool around a remote center of motion....

Repetitive motion planning and control of redundant robot manipulators

CERN Document Server

Zhang, Yunong

2013-01-01

Repetitive Motion Planning and Control of Redundant Robot Manipulators presents four typical motion planning schemes based on optimization techniques, including the fundamental RMP scheme and its extensions. These schemes are unified as quadratic programs (QPs), which are solved by neural networks or numerical algorithms. The RMP schemes are demonstrated effectively by the simulation results based on various robotic models; the experiments applying the fundamental RMP scheme to a physical robot manipulator are also presented. As the schemes and the corresponding solvers presented in the book have solved the non-repetitive motion problems existing in redundant robot manipulators, it is of particular use in applying theoretical research based on the quadratic program for redundant robot manipulators in industrial situations. This book will be a valuable reference work for engineers, researchers, advanced undergraduate and graduate students in robotics fields. Yunong Zhang is a professor at The School of Informa...

Manipulating meanings. [Advertising by the nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Burgess, J. (University College, London (United Kingdom). Dept. of Geography)

Nuclear industry advertising in the United Kingdom is becoming more and more frequent, and is often controversial. The content and impact of recent campaigns are considered, especially the advertisement which portrays nuclear power as beneficial to the greenhouse effect. (author).

Telerobotic operation of structurally flexible, long-reach manipulators

International Nuclear Information System (INIS)

Kwon, D.S.; Hwang, D.H.; Babcock, S.M.

1994-01-01

As a part of the Department of Energy's Environmental Restoration and Waste Management Program, long-reach manipulators are being considered for the retrieval of waste from large storage tanks. Long-reach manipulators may have characteristics significantly different from those of typical industrial robots because of the flexibility of long links needed to cover the large workspace. To avoid structural vibrations during operation, control algorithms employing various types of shaping filters were investigated. A new approach that uses embedded simulation was developed and compared with others. In the new approach, generation of joint trajectories considering link flexibility was also investigated

Soft Manipulators and Grippers: A Review

Directory of Open Access Journals (Sweden)

Josie Hughes

2016-11-01

Full Text Available Soft robotics is a growing area of research which utilises the compliance and adaptability of soft structures to develop highly adaptive robotics for soft interactions. One area in which soft robotics has the ability to make significant impact is in the development of soft grippers and manipulators. With an increased requirement for automation, robotics systems are required to perform task in unstructured and not well defined environments; conditions which conventional rigid robotics are not best suited. This requires a paradigm shift in the methods and materials used to develop robots such that they can adapt to and work safely in human environments. One solution to this is soft robotics, which enables soft interactions with the surroundings whilst maintaining the ability to apply significant force. This review paper assess the current materials and methods, actuation methods and sensors which are used in the development of soft manipulators. The achievements and shortcomings of recent technology in these key areas are evaluated, and this paper concludes with a discussion on the potential impacts of soft manipulators on industry and society.

Development of an advanced robot manipulator system

International Nuclear Information System (INIS)

Oomichi, Takeo; Higuchi, Masaru; Shimizu, Yujiro; Ohnishi, Ken

1991-01-01

A sophisticated manipulator system for an advanced robot was developed under the 'Advanced Robot Technology Development' Program promoted and supported by the Agency of Industrial Science and Technology of MITI. The authors have participated in the development of a fingered manipulator with force and tactile sensors applicable to a masterslave robot system. Our slave manipulator is equipped with four fingers. Though the finger needs many degrees of freedom so as to be suitable for skilful handing of an object, our fingers are designed to have minimum degree of freedom in order to reduce weight. Each finger tip was designed to be similar to a human finger which has flexibility, softness and contact feeling. The shape of the master finger manipulator was so designed that the movement of the fingers is smoother and that the constraint feeling of the operator is smaller. We were adopted to a pneumatic pressure system for transmitting the tactile feeling of the slave fingers to the master fingers. A multiple sensory bilateral control system which gives an operator a feeling of force and tactile reduces his feeling of constraint in carrying out work with a robot system. (author)

Press Manipulation and Its Negative Impact on the Youth

Directory of Open Access Journals (Sweden)

Ioana Manea

2010-12-01

Full Text Available Nowadays, manipulation may be regarded as an essential instrument of the “mass industrial society”, aiming at the conclusion of certain agreements that are convenient to the issuing party, turning to deceit with falsified arguments, as well as to appeals to emotional or non-rational components. The particular forms that it takes in various fields of social life may be found anywhere, from the political form to the economic one. Press strategies have the capacity of manipulating the young consumer’s behaviour, generating numerous negative effects on their everyday life.

Integration of remotely operated manipulator systems for the nuclear industry

International Nuclear Information System (INIS)

Blight, J.; Cornec, G.

2003-01-01

There is no getting away from remotely operated manipulator systems in significant part in dismantling operations, because of the actual radioactive emitting level of installations. However, some main contractors, who have been involved in dismantling projects in the past few years are reluctant to use remotely operated systems because: - equipment characteristics are not suitable for the environment and the work to be performed; - There are some design problems; - Main components do not withstand operation any longer, after some time; - There are deficiencies in the management of quality, for critical equipment problems that degrade the productivity and increase direct and indirect labour cost. As a summary therefore, equipment available on this dismantling market are reputedly unreliable and not 'industrial' (sturdy) enough. However, numerous operations in maintenance in primary loops of nuclear reactors, or in the Offshore sector, are carried out remotely, to the satisfaction of the operators and the investors. In the dismantling sector, a thorough analysis of the difficulties encountered indicates that their origin is mostly due to a lack of methodology - that needs to be addressed -, rather than a technical problem. In that context, CYBERNETIX proposes to be involved in phases upstream and downstream of the equipment supply's. Upstream: Participate in developing/validating the scenarios to be used to optimise the constraints of remote operations/equipment. Downstream: Participate actively in supporting the client on-site, ensuring that equipment are available and maintained by competent and motivated people, and thus, getting experience in order to improve the State-of-the-Art of robotic in that field. Then, the contracting authority and CYBERNETIX jointly define the limits and the content of the involvement of each party, and also define the most appropriate type of 'partnership' between the main contactor and the participating companies, and in order to

Properties of solvent-borne acrylic pressure-sensitive adhesives synthesized by a simple approach

Directory of Open Access Journals (Sweden)

2009-12-01

Full Text Available Acrylic polymers are widely used for fabricating pressure-sensitive adhesives (PSAs with the inherent unique advantages of transparency and superior intrinsic adhesive properties over other polymer-based adhesives. In this study, we have developed and evaluated a method of obtaining by radical copolymerization PSAs for liquid crystalline (LCD applications. Various factors including the amount of monomers, amount of cross-linker, coating weight, dwell time and thermal treatment are investigated for further optimizing the properties of acrylic polymer based PSAs to meet the emerging strict requirements for practical uses related mainly to holding powder and peel strength. The results illustrate that novel crosslinking reagents coupled with the thermal treatment at 70°C can make the resultant PSAs with the improved adhesive properties. The coating weight variation from 10 to 40 g/m2 can significantly enhance the peel strength from 4.0 g/25 mm to 12.5 g/25 mm with about 310% increment. If the dwell time of PSAs with cross-linking reagent is more than 10 hrs, the peel strength can be reduced down to a suitable value to meet the criterion for use. Therefore, acrylic PSAs with peel strength less than 20 g/25 mm and holding power above 120 hrs were successfully synthesized by elaborately designing the reaction system, which are practically applicable for advanced industrial applications.

Particularities of fully-parallel manipulators in 6-DOFs robots design: a review of critical aspects

Directory of Open Access Journals (Sweden)

Milica Lucian

2017-01-01

Full Text Available A whole range of industrial applications requires the presence of parallel mechanisms with six degrees of freedom (6-DOF which have been developed in the last fifteen years, and one of the reasons why they still are a current topic is that present-day computers are capable of performing real-time motion laws of great complexity associated with these types of parallel mechanisms. The present work underlines particularities of parallel manipulators and their importance in the design of 6-DOF robots. The paper reveals the progress made in the last twenty years in the development of 6-DOF parallel manipulators, which increasingly find a wide scope of applications in different industrial areas such as robotics, manufacture and assisted medicine. It also emphasizes the need to determine singular configurations and the effect of cinematic redundancy which can increase the working space of the manipulators by adding active joints in one or more branches of the manipulator. Throughout the work, there were outlined three types of singularities encountered in the modelling of different types of parallel manipulators, and three types of redundancy. Furthermore, an analysis was made of the dimension of the workspace for a series of parallel manipulators, highlighting a number of factors that influence its size.

State of the art in design and control of master-slave manipulators

International Nuclear Information System (INIS)

Kim, Ki Ho; Kim, Seung Ho; Kim, Byung Soo; Kim, Chang Hoi; Jung, Seung Ho; Kwang, Suk Yeoung; Seo, Yong Chil; Lee, Young Kwang

1998-03-01

The use of remotely operated robots and other mechanical devices as replacements of human workers in hazardous environments is a growing field of research. In particular, master-slave manipulators have been extensively used in the nuclear industries governed by the ALARA principle for more than four decades. There, however, are still few successful implementations of complex and high degree-of-freedom systems. The master manipulator is an input device which interfaces with the human operator on one side and with the slave manipulator on the other. Bilateral force-reflecting control plays a key supporting role in successful dexterous manipulation of the master-slave manipulators. Great increase in performance of the master-slave manipulator system can be achieved through good design of mechanical hardware and proper implementation of the embedded control strategies. This report presents some of design issues relevant to designers of the master manipulator as man-machine interface device in the master-slave manipulator system. Significant design parameters for both the replica and universal master manipulators are evaluated. In addition, the report describes the various control schemes of the bilateral force-reflecting master-slave manipulators, discusses the analysis and synthesis of the control loop between the master and slave manipulators, and examines the necessary position and force information on both sides. (author). 80 refs., 2 tabs., 15 figs

Analysis on the Load Carrying Mechanism Integrated as Heterogeneous Co-operative Manipulator in a Walking Wheelchair

Science.gov (United States)

Rajay Vedaraj, I. S.; Jain, Ritika; Rao, B. V. A.

2014-07-01

After industrial robots came into existence during 1960, the technology of robotics with the design and analysis of robots in various forms in industries as well as in domestic applications were developed. Nowadays, along with the automotive sector the robots are producing a great impact in the form of quality and production rate to register their existence reliable in various other sectors also. Robotic technology has undergone various phase translations from being tortured as humanoids to the present day manipulators. Depending upon the various forms of its existence, robot manipulators are designed as serial manipulators and parallel manipulators. Individually both types can be proved effective though both have various drawbacks in design and the kinematic analysis. The versatility of robots can be increased by making them work in an environment where the same work volume is shared by more than one manipulator. This work volume can be identified as co-operative work volume of those manipulators. Here the interference of manipulators in the work volume of other manipulators is possible and is made obstacle free. The main advantage of co-operative manipulators is that when a number of independent manipulators are put together in a cooperative work envelope the efficiency and ability to perform tasks is greatly enhanced. The main disadvantage of the co-operative manipulators lies in the complication of its design even for a simple application, in almost all fields. In this paper, a cooperative design of robot manipulators to work in co-operative work environment is done and analysed for its efficacy. In the industrial applications when robotic manipulators are put together in more numbers, the trajectory planning becomes the tough task in the work cell. Proper design can remove the design defects of the cooperative manipulators and can be utilized in a more efficient way. In the proposed research paper an analysis is made on such a type of cooperative manipulator

Analysis on the Load Carrying Mechanism Integrated as Heterogeneous Co-operative Manipulator in a Walking Wheelchair

International Nuclear Information System (INIS)

Vedaraj, I S Rajay; Jain, Ritika; Rao, B V A

2014-01-01

After industrial robots came into existence during 1960, the technology of robotics with the design and analysis of robots in various forms in industries as well as in domestic applications were developed. Nowadays, along with the automotive sector the robots are producing a great impact in the form of quality and production rate to register their existence reliable in various other sectors also. Robotic technology has undergone various phase translations from being tortured as humanoids to the present day manipulators. Depending upon the various forms of its existence, robot manipulators are designed as serial manipulators and parallel manipulators. Individually both types can be proved effective though both have various drawbacks in design and the kinematic analysis. The versatility of robots can be increased by making them work in an environment where the same work volume is shared by more than one manipulator. This work volume can be identified as co-operative work volume of those manipulators. Here the interference of manipulators in the work volume of other manipulators is possible and is made obstacle free. The main advantage of co-operative manipulators is that when a number of independent manipulators are put together in a cooperative work envelope the efficiency and ability to perform tasks is greatly enhanced. The main disadvantage of the co-operative manipulators lies in the complication of its design even for a simple application, in almost all fields. In this paper, a cooperative design of robot manipulators to work in co-operative work environment is done and analysed for its efficacy. In the industrial applications when robotic manipulators are put together in more numbers, the trajectory planning becomes the tough task in the work cell. Proper design can remove the design defects of the cooperative manipulators and can be utilized in a more efficient way. In the proposed research paper an analysis is made on such a type of cooperative manipulator

MANIPULATIVE COOPERATION POLITICS OF MLM COMPANIES IN SURABAYA CITY

Directory of Open Access Journals (Sweden)

Retno Andriati

2016-01-01

Full Text Available Many studies on multi-level marketing business from law, management, marketing economic and anthropology perspectives have been focused on its legality which is victims of MLM companies/fake MLM companies. Studies on market phenomenon and entrepreneurship of MLM large industry fromeconomy anthropology perspective are still rare especially in Indonesia. The study is intended to identify the underlying cooperation policy as well as manipulative conduct of MLM business in Surabaya.The study employs qualitative and ethnographic approaches. Qualitative data wereanalyzed using ethnographic approaches. The result of research suggests that MLM businesses have undertaken manipulative cooperation politics by establishing both international level direct selling association (WFDSA and national association (APLI in response to the MLM business controversy. APLI exploits andmanipulates non-member of APLI. Exploiting and manipulating MLM members through ideology doctrine and marketing plan of MLM business/corporate culture

Evidence-Based Theory of Market Manipulation And Application: The Malaysian Case

OpenAIRE

Heong, Yin Yun

2010-01-01

According to Part IX Division 1 in Securities Industry Act 1983 of Malaysia Law, stock market manipulation is defined as unlawful action taken either direct or indirectly by any person, to affect the price of securities of the corporation on a stock market in Malaysia for the purpose which may include the purpose of inducing other persons. Extending the framework of Allen and Gale (1992), the Author presents a theory based on the empirical evidence from prosecuted stock market manipulation ca...

Synthesis of multi-wavelength temporal phase-shifting algorithms optimized for high signal-to-noise ratio and high detuning robustness using the frequency transfer function.

Science.gov (United States)

Servin, Manuel; Padilla, Moises; Garnica, Guillermo

2016-05-02

Synthesis of single-wavelength temporal phase-shifting algorithms (PSA) for interferometry is well-known and firmly based on the frequency transfer function (FTF) paradigm. Here we extend the single-wavelength FTF-theory to dual and multi-wavelength PSA-synthesis when several simultaneous laser-colors are present. The FTF-based synthesis for dual-wavelength (DW) PSA is optimized for high signal-to-noise ratio and minimum number of temporal phase-shifted interferograms. The DW-PSA synthesis herein presented may be used for interferometric contouring of discontinuous industrial objects. Also DW-PSA may be useful for DW shop-testing of deep free-form aspheres. As shown here, using the FTF-based synthesis one may easily find explicit DW-PSA formulae optimized for high signal-to-noise and high detuning robustness. To this date, no general synthesis and analysis for temporal DW-PSAs has been given; only ad hoc DW-PSAs formulas have been reported. Consequently, no explicit formulae for their spectra, their signal-to-noise, their detuning and harmonic robustness has been given. Here for the first time a fully general procedure for designing DW-PSAs (or triple-wavelengths PSAs) with desire spectrum, signal-to-noise ratio and detuning robustness is given. We finally generalize DW-PSA to higher number of wavelength temporal PSAs.

Evaluation of head-collision safety of a 7-DOF manipulator according to posture variation

Energy Technology Data Exchange (ETDEWEB)

Kim, Ki Hong, E-mail: rome582@khu.ac.kr; Park, In Jun, E-mail: demianjun@gmail.com; Choi, Jin-Hwan, E-mail: jhchoi@khu.ac.kr; Rhim, Sungsoo, E-mail: ssrhim@khu.ac.kr [Kyung Hee University, Department of Mechanical Engineering (Korea, Republic of)

2016-05-15

As the need for the improvement of the productivity in the manufacturing process grows, industrial robots are brought out of the safety fences and used in the direct collaborative operation with human workers. Consequently, the intended and/or unintended contact between the human and the robot in the collaborative operation is no longer an extraordinary event and is a mundane possibility. The level of the risk of the collision depends on various quantities associated with the collision, for example, inertia, velocity, stiffness, and so on. MSI (manipulator safety index) which is based on HIC (head injury criteria) conventionally used in the automotive industry is one of the practically available measures to estimate the risk of the collision between the human and the manipulator. In this paper MSI is applied to evaluate the collision safety of a 7-DOF articulated human-arm-like manipulator. The risk of the collision could be reduced by choosing different postures without deviating from the given end-effector trajectory using the redundant degree of freedom in the 7-DOF manipulator. The paper shows how the redundant degree of the freedom is utilized to design safer trajectories and/or safer manipulator configurations among many available. A parametric analysis and simulation results for a given trajectory illustrate the usefulness of the concept of the trajectory design for alleviating the risk of the manipulator operation in the human–robot coexisting workspace.

Advance of the new MA 23 force reflecting manipulator system

International Nuclear Information System (INIS)

Vertut, Jean; Coiffet, Philippe; Petit, Michel

1976-01-01

This new bilateral servo manipulator system is under development since 1974, in close cooperation between different french organizations with the leadership of the Commissariat a l'Energie Atomique. This Group is facing in the same Technology different applications covering nuclear remote manipulation, undersea remote work, second generation industrial robots and manipulators for handicaped persons. Brief description of the different arms ranging from 5kg to 20kg mass capacity are given with corresponding tested performances. They all use original electric DC actuators with extremely low friction and zero backlash, with only cables and tapes. System works in different modes: the direct master slave force reflecting mode, an advanced tape recording programmer, minicomputer control, and the combined modes. Work is concentrated on full dynamic control and force control by minicomputer

Optimization on Trajectory of Stanford Manipulator based on Genetic Algorithm

Directory of Open Access Journals (Sweden)

Han Xi

2017-01-01

Full Text Available The optimization of robot manipulator’s trajectory has become a hot topic in academic and industrial fields. In this paper, a method for minimizing the moving distance of robot manipulators is presented. The Stanford Manipulator is used as the research object and the inverse kinematics model is established with Denavit-Hartenberg method. Base on the initial posture matrix, the inverse kinematics model is used to find the initial state of each joint. In accordance with the given beginning moment, cubic polynomial interpolation is applied to each joint variable and the positive kinematic model is used to calculate the moving distance of end effector. Genetic algorithm is used to optimize the sequential order of each joint and the time difference between different starting time of joints. Numerical applications involving a Stanford manipulator are presented.

Parametric design studies of long-reach manipulators

International Nuclear Information System (INIS)

Kwon, D.S.; March-Leuba, S.; Babcock, S.M.; Burks, B.L.; Hamel, W.R.

1993-01-01

A number of different approaches have been studied for remediation of waste storage tanks at various sites. One of the most promising approaches is the use of a high-capacity, long-reach manipulation (LRM) system with a variety of end effectors for dislodging the waste. LRMs may have characteristics significantly different from those of industrial robots due to the long links needed to cover the large workspace. Because link lengths are much greater than their diameters, link flexibility, as well as joint or drive train flexibility, is likely to be significant. LRMs will be required for a variety of applications in the Environmental Restoration and Waste Management Program. While each application will present specific functional, kinematic, and performance requirements, a design approach for determining the kinematic applicability and performance characteristics considering link flexibility is presented with a focus on waste storage tank remediation. This paper addresses key design issues for LRM-based waste retrieval systems. It discusses the effects of parameters such as payload capacity, storage tanks size, and access port diameter on manipulator structural design. The estimated weight, fundamental natural frequency, and static deflection of the manipulator have been calculated for various parameter conditions

The Ethics/ Skills Interface in Image Manipulation

OpenAIRE

Jenny Webber

2000-01-01

Image manipulation using computer technology has become a basic skill required in various graphics dependent industries such as advertising, and the print and electronic media, and for specialist use in institutions for in-house and on-line publishing and the creation of Web pages. The 'seamless' alteration of photographs and other visual images made possible by computer technology has allowed misrepresentation with intent to deceive, and difficulty in establishing copyright of original image...

Manipulators

International Nuclear Information System (INIS)

Wilcock, P.D.

1984-01-01

The patent concerns a manipulator, which enables operations to be carried out remotely from the operator. The device is suitable for use in handling of radioactive materials and other hazardous liquids or gases. The specifications are given, and the movements of the manipulator arm described. (U.K.)

Manipulation and handling processes off-line programming and optimization with use of K-Roset

Science.gov (United States)

Gołda, G.; Kampa, A.

2017-08-01

Contemporary trends in development of efficient, flexible manufacturing systems require practical implementation of modern “Lean production” concepts for maximizing customer value through minimizing all wastes in manufacturing and logistics processes. Every FMS is built on the basis of automated and robotized production cells. Except flexible CNC machine tools and other equipments, the industrial robots are primary elements of the system. In the studies, authors look for wastes of time and cost in real tasks of robots, during manipulation processes. According to aspiration for optimization of handling and manipulation processes with use of the robots, the application of modern off-line programming methods and computer simulation, is the best solution and it is only way to minimize unnecessary movements and other instructions. The modelling process of robotized production cell and offline programming of Kawasaki robots in AS-Language will be described. The simulation of robotized workstation will be realized with use of virtual reality software K-Roset. Authors show the process of industrial robot’s programs improvement and optimization in terms of minimizing the number of useless manipulator movements and unnecessary instructions. This is realized in order to shorten the time of production cycles. This will also reduce costs of handling, manipulations and technological process.

Development of Screenable Pressure Sensitive Adhesives

Energy Technology Data Exchange (ETDEWEB)

Steven J. Severtson

2003-11-29

An industrial research area of high activity in recent years has been the development of pressure sensitive adhesive (PSA) products that do not interfere with the processing of post-consumer waste. The problem of PSA contamination is arguably the most important technical challenge in expanding the use of recycled fiber. The presence of PSAs in recovered paper creates problems that reduce the efficiency of recycling and papermaking operations and diminish product quality. The widespread use of PSAs engineered to avoid these problems, often referred to as environmentally benign PSAs, could greatly increase the commercial viability of utilizing secondary fiber. Much of the research efforts in this area have focused on the development of PSAs that are designed for enhanced removal with cleaning equipment currently utilized by recycling plants. Most removal occurs at the pressure screens with the size and shape of residual contaminants in the process being the primary criteria for their separation. A viable approach for developing environmentally benign PSAs is their reformulation to inhibit fragmentation. The reduction of adhesives to small particles occurs almost exclusively during repulping; a process in which water and mechanical energy are used to swell and reduce paper products to their constituent fiber. Engineering PSA products to promote the formation of larger adhesive particles during repulping will greatly enhance their removal and reduce or eliminate their impact on the recycling process.

Letter from Thomas J Graves on Concerns about National Public Awareness Campaign on Childhood Lead Poisoning

Science.gov (United States)

Request for correction of information by EPA withdrawal from sponsorship and participation in the print and video depictions used in the childhood lead poisoning PSAs are misleading and misrepresent the paint industry

Currency Manipulation versus Current Account Manipulation

OpenAIRE

Junning Cai

2005-01-01

It is said that a country’s currency peg can become currency manipulation representing protracted government intervention in the foreign exchange market that gives it unfair competitive advantage in international trade yet prevents effective balance of payments in its trade partners. Regarding this widespread fallacy, this paper explains why currency peg is not currency manipulation even when it keeps a country’s currency undervalued. We clarify that 1) government is inherently a major player...

Optimization in the design and control of robotic manipulators: A survey

International Nuclear Information System (INIS)

Rao, S.S.; Bhatti, P.K.

1989-01-01

Robotics is a relatively new and evolving technology being applied to manufacturing automation and is fast replacing the special-purpose machines or hard automation as it is often called. Demands for higher productivity, better and uniform quality products, and better working environments are primary reasons for its development. An industrial robot is a multifunctional and computer-controlled mechanical manipulator exhibiting a complex and highly nonlinear behavior. Even though most current robots have anthropomorphic configurations, they have far inferior manipulating abilities compared to humans. A great deal of research effort is presently being directed toward improving their overall performance by using optimal mechanical structures and control strategies. The optimal design of robot manipulators can include kinematic performance characteristics such as workspace, accuracy, repeatability, and redundancy. The static load capacity as well as dynamic criteria such as generalized inertia ellipsoid, dynamic manipulability, and vibratory response have also been considered in the design stages. The optimal control problems typically involve trajectory planning, time-optimal control, energy-optimal control, and mixed-optimal control. The constraints in a robot manipulator design problem usually involve link stresses, actuator torques, elastic deformation of links, and collision avoidance. This paper presents a review of the literature on the issues of optimum design and control of robotic manipulators and also the various optimization techniques currently available for application to robotics

Dexterous Manipulation: Making Remote Manipulators Easy to Use

International Nuclear Information System (INIS)

HARRIGAN, RAYMOND W.; BENNETT, PHIL C.

2001-01-01

Perhaps the most basic barrier to the widespread deployment of remote manipulators is that they are very difficult to use. Remote manual operations are fatiguing and tedious, while fully autonomous systems are seldom able to function in changing and unstructured environments. An alternative approach to these extremes is to exploit computer control while leaving the operator in the loop to take advantage of the operator's perceptual and decision-making capabilities. This report describes research that is enabling gradual introduction of computer control and decision making into operator-supervised robotic manipulation systems, and its integration on a commercially available, manually controlled mobile manipulator

Survey of advanced general-purpose software for robot manipulators

International Nuclear Information System (INIS)

Latombe, J.C.

1983-01-01

Computer-controlled sensor-based robots will more and more common in industry. This paper attempts to survey the main trends of the development of advanced general-purpose software for robot manipulators. It is intended to make clear that robots are not only mechanical devices. They are truly programmable machines, and their programming, which occurs in an imperfectly modelled world,is somewhat different from conventional computer programming. (orig.)

A Null Space Control of Two Wheels Driven Mobile Manipulator Using Passivity Theory

Science.gov (United States)

Shibata, Tsuyoshi; Murakami, Toshiyuki

This paper describes a control strategy of null space motion of a two wheels driven mobile manipulator. Recently, robot is utilized in various industrial fields and it is preferable for the robot manipulator to have multiple degrees of freedom motion. Several studies of kinematics for null space motion have been proposed. However stability analysis of null space motion is not enough. Furthermore, these approaches apply to stable systems, but they do not apply unstable systems. Then, in this research, base of manipulator equips with two wheels driven mobile robot. This robot is called two wheels driven mobile manipulator, which becomes unstable system. In the proposed approach, a control design of null space uses passivity based stabilizing. A proposed controller is decided so that closed-loop system of robot dynamics satisfies passivity. This is passivity based control. Then, control strategy is that stabilizing of the robot system applies to work space observer based approach and null space control while keeping end-effector position. The validity of the proposed approach is verified by simulations and experiments of two wheels driven mobile manipulator.

Latest developments, by Taylor Hitec Ltd, in power manipulators and deployed robots for the nuclear industry and elsewhere

International Nuclear Information System (INIS)

Lowe, D.B.

1985-01-01

Taylor Hitec recently achieved a major advancement in remote manipulator engineering with the successful commissioning of the 'Advanced Manipulator' - a high precision tool for remote working, commanded by powerful computerised control developed in partnership with CEGB Marchwood. In the progression of the technology involved a second manipulator has been designed, with significant changes in mechanisms and is now in manufacture. A radically different implement has been conceived and pursued through to the prototype stage in the form of a 'vertebrate' limb for deploying remote inspection apparatus. The designs and capabilities of these three devices are presented here in essence and consideration is given to wider applications. (author)

A manipulator

International Nuclear Information System (INIS)

Cole, G.V.; Hofmann, D.A.; Ashby, R.

1984-01-01

A manipulator is described, for remote handling of objects within an enclosure, by an operator outside the enclosure. The manipulator consists of a telescopically extensible arm member, the action of which is controlled by a motor-driven lead screw. (U.K.)

Remote inspection manipulators for AGR II: Babcock Power's interstitial manipulator

International Nuclear Information System (INIS)

Whyley, S.R.

1985-01-01

The interstitial manipulator has been designed and built by Babcock Power for the remote visual inspection of AGR II reactors at Heysham and Torness. Its five drives are operated from a console local to the manipulator on the pile cap, or from a similar console located remotely. The need to operate from an interstitial ISI standpipe has restricted the size of the components entering the reactor, and this has consequently provided the major design constraint. A detailed structural assessment of the manipulator was carried out to demonstrate the ability to operate with payloads in excess of the largest camera weight of 13.6 kg. The manipulator finite element model was also used to determine static deflections, and, as a consequence, has provided data from which the control system is able to predict accurately the camera's position. Other computer aided design techniques have enabled the step by step sequences of manipulator deployment, in the restricted space available, to be successfully demonstrated. (author)

Effects of exposure to anti-vaping public service announcements among current smokers and dual users of cigarettes and electronic nicotine delivery systems.

Science.gov (United States)

Tan, Andy S L; Rees, Vaughan W; Rodgers, Justin; Agudile, Emeka; Sokol, Natasha A; Yie, Kyeungyeun; Sanders-Jackson, Ashley

2018-05-16

Anti-vaping public service announcements (PSAs) are intended to discourage vaping or use of electronic nicotine delivery systems (ENDS). However, vaping portrayals in PSAs may have unintended effects if they increase smoking or vaping urges. This study examined benefits and unintended effects of anti-vaping PSAs with vapor portrayals on smoking and vaping-related outcomes. Young adult smokers (N = 171) and dual users (N = 122) aged 21-30 years were randomly assigned to view: 1) anti-vaping PSAs with vapor; 2) anti-vaping PSAs without vapor; 3) physical activity PSAs; or 4) anti-smoking PSAs with smoking cues. Outcomes were changes in vaping and smoking urges before and after viewing PSAs, post-test vaping and smoking intentions in the next hour, and post-test intention to purchase ENDS and traditional cigarettes. Smokers only: Exposure to anti-vaping PSAs with vapor (vs. physical activity) was associated with lower intention to vape and to purchase ENDS (ps vaping PSAs with vapor (vs. PSAs without vapor and vs. anti-smoking PSAs with smoking cues) was associated with lower intention to vape in the next hour (ps vaping PSAs without vapor (vs. physical activity) was associated with lower change in vaping urge (p vaping PSAs without vapor (vs. anti-smoking PSAs) was associated with lower intention to purchase ENDS (p vaping PSAs with vapor was not associated with unintended effects and may have benefits on reducing smoking and vaping-related outcomes. Copyright © 2018. Published by Elsevier B.V.

Dust diseases and the legacy of corporate manipulation of science and law.

Science.gov (United States)

Egilman, David; Bird, Tess; Lee, Caroline

2014-01-01

The dust diseases silicosis and asbestosis were the first occupational diseases to have widespread impact on workers. Knowledge that asbestos and silica were hazardous to health became public several decades after the industry knew of the health concerns. This delay was largely influenced by the interests of Metropolitan Life Insurance Company (MetLife) and other asbestos mining and product manufacturing companies. To understand the ongoing corporate influence on the science and politics of asbestos and silica exposure, including litigation defense strategies related to historical manipulation of science. We examined previously secret corporate documents, depositions and trial testimony produced in litigation; as well as published literature. Our analysis indicates that companies that used and produced asbestos have continued and intensified their efforts to alter the asbestos-cancer literature and utilize dust-exposure standards to avoid liability and regulation. Organizations of asbestos product manufacturers delayed the reduction of permissible asbestos exposures by covering up the link between asbestos and cancer. Once the decline of the asbestos industry in the US became inevitable, the companies and their lawyers designed the state of the art (SOA) defense to protect themselves in litigation and to maintain sales to developing countries. Asbestos product companies would like the public to believe that there was a legitimate debate surrounding the dangers of asbestos during the twentieth century, particularly regarding the link to cancer, which delayed adequate regulation. The asbestos-cancer link was not a legitimate contestation of science; rather the companies directly manipulated the scientific literature. There is evidence that industry manipulation of scientific literature remains a continuing problem today, resulting in inadequate regulation and compensation and perpetuating otherwise preventable worker and consumer injuries and deaths.

Downhole water management and robotic valve manipulation on electric wireline

Energy Technology Data Exchange (ETDEWEB)

Schwanitz, Brian [Welltec, Alleroed (Denmark); Petersen, Erik; Farias, Eduardo [Welltec do Brasil Ltda., Rio de Janeiro, RJ (Brazil)

2008-07-01

Due to high operating cost and challenging environments, the oil and gas industry is facing an increasing demand to identify areas where new intervention solutions can be applied. Down hole water management and robotic valve manipulation are some of the areas where new approaches are finding critical success. A new technology has enabled increased recovery rates by managing produced water and allowing remote mechanical manipulation of down hole valves on wireline. These services are possible when applying a robotic stroking device and a wireline key tool.This paper will examine the challenges and present case histories illustrating how advanced technological solutions were applied to overcome operational problem in order to enhance reservoir performance and well productivity. Specifically the paper will illustrate both how isolating sliding side door and setting bridge plug in high x-flow using wireline stroker and tractor technologies water cut were reduced from 85% to 5% and from 90% to 45% respectively and shifting isolation sleeve and open and close sliding sleeve replacing conventional methods with a solution that runs on electrical wireline meant a revolution within the oil and gas industry. (author)

Characteristics of manipulative in mathematics laboratory

Science.gov (United States)

Istiandaru, A.; Istihapsari, V.; Prahmana, R. C. I.; Setyawan, F.; Hendroanto, A.

2017-12-01

A manipulative is a teaching aid designed such that students could understand mathematical concepts by manipulating it. This article aims to provide an insight to the characteristics of manipulatives produced in the mathematics laboratory of Universitas Ahmad Dahlan, Indonesia. A case study was conducted to observe the existing manipulatives produced during the latest three years and classified the manipulatives based on the characteristics found. There are four kinds of manipulatives: constructivism manipulative, virtual manipulative, informative manipulative, and game-based manipulative. Each kinds of manipulative has different characteristics and impact towards the mathematics learning.

Industrial Education. "Small Engines".

Science.gov (United States)

Parma City School District, OH.

Part of a series of curriculum guides dealing with industrial education in junior high schools, this guide provides the student with information and manipulative experiences on small gasoline engines. Included are sections on shop adjustment, safety, small engines, internal combustion, engine construction, four stroke engines, two stroke engines,…

Manipulators for production and research

International Nuclear Information System (INIS)

Munro, Ian

1987-01-01

The development of caves or cells and master-slave manipulators to handle radioactive materials is discussed. Some of the most recent advances are described. A manipulator arm, a master-slave manipulator and a servomanipulator mounted on a manipulator are illustrated. Future developments are discussed - these include resolved tip control for the manipulator. (UK)

Features and perspectives of automatized construction crane-manipulators

Science.gov (United States)

Stepanov, Mikhail A.; Ilukhin, Peter A.

2018-03-01

Modern construction industry still has a high percentage of manual labor, and the greatest prospects of improving the construction process are lying in the field of automatization. In this article automatized construction manipulator-cranes are being studied in order to achieve the most rational design scheme. This is done through formulating a list of general conditions necessary for such cranes and a set of specialized kinematical conditions. A variety of kinematical schemes is evaluated via these conditions, and some are taken for further dynamical analisys. The comparative dynamical analisys of taken schemes was made and the most rational scheme was defined. Therefore a basis for a more complex and practical research of manipulator-cranes design is given and ways to implement them on practical level can now be calculated properly. Also, the perspectives of implementation of automated control systems and informational networks on construction sites in order to boost the quality of construction works, safety of labour and ecological safety are shown.

Development of a Streamlined Work Flow for Handling Patients' Genetic Testing Insurance Authorizations.

Science.gov (United States)

Uhlmann, Wendy R; Schwalm, Katie; Raymond, Victoria M

2017-08-01

Obtaining genetic testing insurance authorizations for patients is a complex, time-involved process often requiring genetic counselor (GC) and physician involvement. In an effort to mitigate this complexity and meet the increasing number of genetic testing insurance authorization requests, GCs formed a novel partnership with an industrial engineer (IE) and a patient services associate (PSA) to develop a streamlined work flow. Eight genetics clinics and five specialty clinics at the University of Michigan were surveyed to obtain benchmarking data. Tasks needed for genetic testing insurance authorization were outlined and time-saving work flow changes were introduced including 1) creation of an Excel password-protected shared database between GCs and PSAs, used for initiating insurance authorization requests, tracking and follow-up 2) instituting the PSAs sending GCs a pre-clinic email noting each patients' genetic testing insurance coverage 3) inclusion of test medical necessity documentation in the clinic visit summary note instead of writing a separate insurance letter and 4) PSAs development of a manual with insurance providers and genetic testing laboratories information. These work flow changes made it more efficient to request and track genetic testing insurance authorizations for patients, enhanced GCs and PSAs communication, and reduced tasks done by clinicians.

MEMS 6 degrees of freedom parallel micro manipulator for TEM sample manipulation

NARCIS (Netherlands)

Brouwer, Dannis Michel; de Jong, B.R.; Soemers, Herman

2005-01-01

Up till now MEMS actuators acted either only in-plane or only out-of plane restricting to 3 DOF manipulation. A design for a millimeter-sized manipulator with 6 degrees of freedom to manipulate a micron-sized substrate at nanometer resolution over strokes of 10 microns with a position stability

Hydraulic manipulator research at ORNL

International Nuclear Information System (INIS)

Kress, R.L.; Jansen, J.F.; Love, L.J.

1997-01-01

Recently, task requirements have dictated that manipulator payload capacity increase to accommodate greater payloads, greater manipulator length, and larger environmental interaction forces. General tasks such as waste storage tank cleanup and facility dismantlement and decommissioning require manipulator life capacities in the range of hundreds of pounds rather than tens of pounds. To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned once again to hydraulics as a means of actuation. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem), sophisticated modeling, analysis, and control experiments are usually needed. Oak Ridge National Laboratory (ORNL) has a history of projects that incorporate hydraulics technology, including mobile robots, teleoperated manipulators, and full-scale construction equipment. In addition, to support the development and deployment of new hydraulic manipulators, ORNL has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The purpose of this article is to describe the past hydraulic manipulator developments and current hydraulic manipulator research capabilities at ORNL. Included are example experimental results from ORNL's flexible/prismatic test stand

Hydraulic manipulator research at ORNL

Energy Technology Data Exchange (ETDEWEB)

Kress, R.L.; Jansen, J.F. [Oak Ridge National Lab., TN (United States); Love, L.J. [Oak Ridge Inst. for Science and Education, TN (United States)

1997-03-01

Recently, task requirements have dictated that manipulator payload capacity increase to accommodate greater payloads, greater manipulator length, and larger environmental interaction forces. General tasks such as waste storage tank cleanup and facility dismantlement and decommissioning require manipulator life capacities in the range of hundreds of pounds rather than tens of pounds. To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned once again to hydraulics as a means of actuation. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem), sophisticated modeling, analysis, and control experiments are usually needed. Oak Ridge National Laboratory (ORNL) has a history of projects that incorporate hydraulics technology, including mobile robots, teleoperated manipulators, and full-scale construction equipment. In addition, to support the development and deployment of new hydraulic manipulators, ORNL has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The purpose of this article is to describe the past hydraulic manipulator developments and current hydraulic manipulator research capabilities at ORNL. Included are example experimental results from ORNL`s flexible/prismatic test stand.

A review of the evolution of human reliability analysis methods at nuclear industry

International Nuclear Information System (INIS)

Oliveira, Lécio N. de; Santos, Isaac José A. Luquetti dos; Carvalho, Paulo V.R.

2017-01-01

This paper reviews the status of researches on the application of human reliability analysis methods at nuclear industry and its evolution along the years. Human reliability analysis (HRA) is one of the elements used in Probabilistic Safety Analysis (PSA) and is performed as part of PSAs to quantify the likelihood that people will fail to take action, such as errors of omission and errors of commission. Although HRA may be used at lots of areas, the focus of this paper is to review the applicability of HRA methods along the years at nuclear industry, especially in Nuclear Power Plants (NPP). An electronic search on CAPES Portal of Journals (A bibliographic database) was performed. This literature review covers original papers published since the first generation of HRA methods until the ones published on March 2017. A total of 94 papers were retrieved by the initial search and 13 were selected to be fully reviewed and for data extraction after the application of inclusion and exclusion criteria, quality and suitability evaluation according to applicability at nuclear industry. Results point out that the methods from first generation are more used in practice than methods from second generation. This occurs because it is more concentrated towards quantification, in terms of success or failure of human action what make them useful for quantitative risk assessment to PSA. Although the second generation considers context and error of commission in human error prediction, they are not wider used in practice at nuclear industry to PSA. (author)

A review of the evolution of human reliability analysis methods at nuclear industry

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Lécio N. de; Santos, Isaac José A. Luquetti dos; Carvalho, Paulo V.R., E-mail: lecionoliveira@gmail.com, E-mail: luquetti@ien.gov.br, E-mail: paulov@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2017-11-01

This paper reviews the status of researches on the application of human reliability analysis methods at nuclear industry and its evolution along the years. Human reliability analysis (HRA) is one of the elements used in Probabilistic Safety Analysis (PSA) and is performed as part of PSAs to quantify the likelihood that people will fail to take action, such as errors of omission and errors of commission. Although HRA may be used at lots of areas, the focus of this paper is to review the applicability of HRA methods along the years at nuclear industry, especially in Nuclear Power Plants (NPP). An electronic search on CAPES Portal of Journals (A bibliographic database) was performed. This literature review covers original papers published since the first generation of HRA methods until the ones published on March 2017. A total of 94 papers were retrieved by the initial search and 13 were selected to be fully reviewed and for data extraction after the application of inclusion and exclusion criteria, quality and suitability evaluation according to applicability at nuclear industry. Results point out that the methods from first generation are more used in practice than methods from second generation. This occurs because it is more concentrated towards quantification, in terms of success or failure of human action what make them useful for quantitative risk assessment to PSA. Although the second generation considers context and error of commission in human error prediction, they are not wider used in practice at nuclear industry to PSA. (author)

Development of Industrial Yeast Platform Strains

DEFF Research Database (Denmark)

Bergdahl, Basti; Dato, Laura; Förster, Jochen

2014-01-01

Most of the current metabolic engineering projects are carried out using laboratory strains as the starting host. Although such strains are easily manipulated genetically, their robustness does not always meet the requirements set by industrial fermentation conditions. In such conditions, the cells...... screening of the 36 industrial and laboratory yeast strains. In addition, progress in the development of molecular biology methods for generating the new strains will be presented....

[Surgical manipulators in ear surgery: a future vision?].

Science.gov (United States)

Hofer, M; Dietz, A; Strauss, G

2011-04-01

Middle ear surgery bears a high risk for injury of difficult to differentiate risk structures. Thus, a precise preparation in this area must be the surgical task. However, there are human (tremor) and systematic limitations (OR setup, narrow access). Assistance systems in terms of manipulators are so far not part of the clinical routine. Although, they could compensate for the above mentioned limitations. MANIPULATORS: This work reviews existing surgical manipulator systems. The expected value is an elevated patient safety through improving surgical accuracy and the reduction of ergonomic deficits. CLINICAL APPLICATION AND DEVELOPMENT: In clinical application there are simply modified industrial robots, highly complex master slave systems and small miniature master slave systems which are directly located at the patient. A disadvantage of most systems is the limited number of applicable instruments. Often, only especially designed instruments can be used. The goal in development should be to create a compact, short distance operated master slave system. The usability of standard (already available) instruments with an easy integration into the surgical and sterilisation procedure would lower the threshold for acceptance of such systems.The surgeon will remain the key player. He can only work efficiently in an ergonomic environment and will always have the responsibility for the intervention. From the authors perspective, highly automated systems should not be the research goal. © Georg Thieme Verlag KG Stuttgart · New York.

Compliant Aerial Manipulators

DEFF Research Database (Denmark)

Bartelds, T.; Capra, A.; Hamaza, S.

2016-01-01

joints. The approach aims at limiting the influence of impacts on the controlled attitude dynamics in order to allow the aerial manipulator to remain stable during and after impact. The developed concept is intended to convert kinetic energy into potential energy, which is permanently stored into elastic...... elements by means of directional locking mechanisms. The proposed approach has been tested on a 2 d.o.f. manipulator mounted on a quadrotor UAV. The manipulation system has one active rotational d.o.f. compensating for pitch movements of the UAV and one passive linear joint which is in charge of absorbing...... the impact energy. The device has been used to validate the method through experiments, in comparison with a rigid manipulator. The results show that the proposed approach and the developed mechanical system achieve stable impact absorption without bouncing away from the interacting environment. Our work has...

Trajectory generation for manipulators using linear quadratic optimal tracking

Directory of Open Access Journals (Sweden)

Olav Egeland

1989-04-01

Full Text Available The reference trajectory is normally known in advance in manipulator control which makes it possible to apply linear quadratic optimal tracking. This gives a control system which rounds corners and generates optimal feedforward. The method may be used for references consisting of straight-line segments as an alternative to the two-step method of using splines to smooth the reference and then applying feedforward. In addition, the method can be used for more complex trajectories. The actual dynamics of the manipulator are taken into account, and this results in smooth and accurate tracking. The method has been applied in combination with the computed torque technique and excellent performance was demonstrated in a simulation study. The method has also been applied experimentally to an industrial spray-painting robot where a saw-tooth reference was tracked. The corner was rounded extremely well, and the steady-state tracking error was eliminated by the optimal feedforward.

Finansal Bilgi Manipülasyonunun Beneish Modeli Yardımıyla Ölçülmesi: BIST İmalat Sanayi Üzerine Bir Araştırma (Measurement of Financial Information Manipulation with The Help of Beneish Model: A Research on BIST Manufacturing Industry

Directory of Open Access Journals (Sweden)

Hakkı FINDIK

2016-03-01

Full Text Available The financial information manipulation has been the crucial subject of the recent years with the effect of various perspectives related to the earning management. Because of the conflicts of interest of information users, the manipulation possibility of the financial reports belonging to the businesses, which are the important actor of financial markets, is present. The managers can apply the financial information manipulation by showing the financial position and performance of business different from what they currently are thanks to the flexibility that the accrual basis of accounting provides them. In this study, the finding related to whether the businesses processing in BIST manufacturing industry have applied the financial information manipulation or not via Beneish model has been carried out. In addition to this, the finding related to which variables have effect on whether any businesses have carried out the financial information manipulation or not by using logistic regression has been done. The obtained results show powerful evidences on behalf of the fact that the financial information manipulation has taken its source from the accrual basis of accounting.

Efficient illumination of spatial light modulators for optical trapping and manipulation

DEFF Research Database (Denmark)

Bañas, Andrew Rafael; Kopylov, Oleksii; Raaby, Peter

Energy efficiency is always desirable. This is particularly true with lasers that find many applications in research and industry. Combined with spatial light modulators (SLMs) lasers are used for optical trapping and manipulation, sorting, microscopy or biological stimulation1. Besides efficiency....... We have also shown dynamic SLM-generated patterns for materials processing and biological research. To efficiently illuminate an SLM, we used a compact pen-sized GPC-LS in place of an iris. For the same input power, hologram reconstructions are ~3x brighter or alternatively ~3x more focal spots can...... be addressed. This allows better response or increased parallel addressing for e.g. optical manipulation and sorting. Simple yet effective, a GPC-LS could save substantial power in applications that truncate lasers to a specific shape....

EVALUATION OF STATE-OF-THE-ART MANIPULATORS AND REQUIREMENTS FOR DOE ROBOTICS APPLICATIONS

Energy Technology Data Exchange (ETDEWEB)

BLACK, DEREK; GRUPINSKI, STEPHEN

1998-10-08

This report provides an overview of applications within the DOE complex which could benefit from the use of modular robotics technology during remediation operations. Each application area contains one or more specific tasks which are presently conducted by humans under hazardous conditions or which are deemed highly impractical, or are altogether impossible without automation. Five major areas were investigated for specific needs with respect to automation. Information was collected on Mixed Waste Operations, Contaminant Automated Analysis, Tanks, Decontamination and Dismantlement and Automated Plutonium Processing. During this investigation, information was gathered from available literature, telephone interviews with informed personnel and on-site visits. This data serves to provide design requirements and guidelines for the design of a family of modular actuators, which will be used to construct manipulators suited to each task. In addition, a survey of existing modular manipulator designs is presented. This survey addresses modular manipulators developed inside government labs and in universities for such applications as space exploration or controls research. It also addresses efforts at commercially viable industrial manipulators which have been built. This survey of robotic systems provides the reader with a glimpse into what technology currently exists in the way of modular manipulator automation and, to a degree, where this technology may be applicable or, more often, where these systems are unsuited to EM applications. From the information gathered during this study, it is possible to sufficiently define the requirements of one manipulator system which can be used to conduct automated transfer operations within Plutonium gloveboxes. This manipulator will be constructed from ARM Automation actuator modules and will provide this application with a viable option for automation within these gloveboxes. The design issues surrounding this manipulator and its

Understanding pharmaceutical research manipulation in the context of accounting manipulation.

Science.gov (United States)

Brown, Abigail

2013-01-01

The problem of the manipulation of data that arises when there is both opportunity and incentive to mislead is better accepted and studied - though by no means solved - in financial accounting than in medicine. This article analyzes pharmaceutical company manipulation of medical research as part of a broader problem of corporate manipulation of data in the creation of accounting profits. The article explores how our understanding of accounting fraud and misinformation helps us understand the risk of similar information manipulation in the medical sciences. This understanding provides a framework for considering how best to improve the quality of medical research and analysis in light of the current system of medical information production. I offer three possible responses: (1) use of the Dodd-Frank whistleblower provisions to encourage reporting of medical research fraud; (2) a two-step academic journal review process for clinical trials; and (3) publicly subsidized trial-failure insurance. These would improve the release of negative information about drugs, thereby increasing the reliability of positive information. © 2013 American Society of Law, Medicine & Ethics, Inc.

An evolutionary resolution of manipulation conflict.

Science.gov (United States)

González-Forero, Mauricio

2014-07-01

Individuals can manipulate the behavior of social partners. However, manipulation may conflict with the fitness interests of the manipulated individuals. Manipulated individuals can then be favored to resist manipulation, possibly reducing or eliminating the manipulated behavior in the long run. I use a mathematical model to show that conflicts where manipulation and resistance coevolve can disappear as a result of the coevolutionary process. I find that while manipulated individuals are selected to resist, they can simultaneously be favored to express the manipulated behavior at higher efficiency (i.e., providing increasing fitness effects to recipients of the manipulated behavior). Efficiency can increase to a point at which selection for resistance disappears. This process yields an efficient social behavior that is induced by social partners, and over which the inducing and induced individuals are no longer in conflict. A necessary factor is costly inefficiency. I develop the model to address the evolution of advanced eusociality via maternal manipulation (AEMM). The model predicts AEMM to be particularly likely in taxa with ancestrally imperfect resistance to maternal manipulation. Costly inefficiency occurs if the cost of delayed dispersal is larger than the benefit of exploiting the maternal patch. I discuss broader implications of the process. © 2014 The Author(s). Evolution © 2014 The Society for the Study of Evolution.

Continuous micro-vortex-based nanoparticle manipulation via focused surface acoustic waves.

Science.gov (United States)

Collins, David J; Ma, Zhichao; Han, Jongyoon; Ai, Ye

2016-12-20

Despite increasing demand in the manipulation of nanoscale objects for next generation biological and industrial processes, there is a lack of methods for reliable separation, concentration and purification of nanoscale objects. Acoustic methods have proven their utility in contactless manipulation of microscale objects mainly relying on the acoustic radiation effect, though the influence of acoustic streaming has typically prevented manipulation at smaller length scales. In this work, however, we explicitly take advantage of the strong acoustic streaming in the vicinity of a highly focused, high frequency surface acoustic wave (SAW) beam emanating from a series of focused 6 μm substrate wavelength interdigital transducers patterned on a piezoelectric lithium niobate substrate and actuated with a 633 MHz sinusoidal signal. This streaming field serves to focus fluid streamlines such that incoming particles interact with the acoustic field similarly regardless of their initial starting positions, and results in particle displacements that would not be possible with a travelling acoustic wave force alone. This streaming-induced manipulation of nanoscale particles is maximized with the formation of micro-vortices that extend the width of the microfluidic channel even with the imposition of a lateral flow, occurring when the streaming-induced flow velocities are an order of magnitude larger than the lateral one. We make use of this acoustic streaming to demonstrate the continuous and differential focusing of 100 nm, 300 nm and 500 nm particles.

Industrial robot

Science.gov (United States)

Prakashan, A.; Mukunda, H. S.; Samuel, S. D.; Colaco, J. C.

1992-11-01

This paper addresses the design and development of a four degree of freedom industrial manipulator, with three liner axes in the positioning mechanism and one rotary axis in the orientation mechanism. The positioning mechanism joints are driven with dc servo motors fitted with incremental shaft encoders. The rotary joint of the orientation mechanism is driven by a stepping motor. The manipulator is controlled by an IBM 386 PC/AT. Microcomputer based interface cards have been developed for independent joint control. PID controllers for dc motors have been designed. Kinematic modeling, dynamic modeling, and path planning have been carried out to generate the control sequence to accomplish a given task with reference to source and destination state constraints. This project has been sponsored by the Department of Science and Technology, Government of India, New Delhi, and has been executed in collaboration with M/s Larsen & Toubro Ltd, Mysore, India.

Manipulation, salience, and nudges.

Science.gov (United States)

Noggle, Robert

2018-03-01

Cass Sunstein and Richard Thaler recommend helping people make better decisions by employing 'nudges', which they define as noncoercive methods of influencing choice for the better. Not surprisingly, healthcare practitioners and public policy professionals have become interested in whether nudges might be a promising method of improving health-related behaviors without resorting to heavy-handed methods such as coercion, deception, or government regulation. Many nudges seem unobjectionable as they merely improve the quality and quantity available for the decision-maker. However, other nudges influence decision-making in ways that do not involve providing more and better information. Nudges of this sort raise concerns about manipulation. This paper will focus on noninformational nudges that operate by changing the salience of various options. It will survey two approaches to understanding manipulation, one which sees manipulation as a kind of pressure, and one that sees it as a kind of trickery. On the pressure view, salience nudges do not appear to be manipulative. However, on the trickery view (which the author favors), salience nudges will be manipulative if they increase the salience so that it is disproportionate to that fact's true relevance and importance for the decision at hand. By contrast, salience nudges will not be manipulative if they merely highlight some fact that is true and important for the decision at hand. The paper concludes by providing examples of both manipulative and nonmanipulative salience nudges. © 2017 John Wiley & Sons Ltd.

Industry at odds over export coal prices

International Nuclear Information System (INIS)

Yarwood, Ken.

1993-01-01

The United Mine Workers' Union claims that Australia is not getting enough for its coal. Moreover, coal company executives argue that the open market policy was failing the industry and that the export customers were manipulating Australian producers. Consequently, the unions are calling for Federal Government intervention and support the establishment of a national coal authority to co-ordinate the marketing of coal and investment in the industry. ills

Cell manipulation in microfluidics

International Nuclear Information System (INIS)

Yun, Hoyoung; Kim, Kisoo; Lee, Won Gu

2013-01-01

Recent advances in the lab-on-a-chip field in association with nano/microfluidics have been made for new applications and functionalities to the fields of molecular biology, genetic analysis and proteomics, enabling the expansion of the cell biology field. Specifically, microfluidics has provided promising tools for enhancing cell biological research, since it has the ability to precisely control the cellular environment, to easily mimic heterogeneous cellular environment by multiplexing, and to analyze sub-cellular information by high-contents screening assays at the single-cell level. Various cell manipulation techniques in microfluidics have been developed in accordance with specific objectives and applications. In this review, we examine the latest achievements of cell manipulation techniques in microfluidics by categorizing externally applied forces for manipulation: (i) optical, (ii) magnetic, (iii) electrical, (iv) mechanical and (v) other manipulations. We furthermore focus on history where the manipulation techniques originate and also discuss future perspectives with key examples where available. (topical review)

Mechatronic Model Based Computed Torque Control of a Parallel Manipulator

Directory of Open Access Journals (Sweden)

Zhiyong Yang

2008-11-01

Full Text Available With high speed and accuracy the parallel manipulators have wide application in the industry, but there still exist many difficulties in the actual control process because of the time-varying and coupling. Unfortunately, the present-day commercial controlles cannot provide satisfying performance for its single axis linear control only. Therefore, aimed at a novel 2-DOF (Degree of Freedom parallel manipulator called Diamond 600, a motor-mechanism coupling dynamic model based control scheme employing the computed torque control algorithm are presented in this paper. First, the integrated dynamic coupling model is deduced, according to equivalent torques between the mechanical structure and the PM (Permanent Magnetism servomotor. Second, computed torque controller is described in detail for the above proposed model. At last, a series of numerical simulations and experiments are carried out to test the effectiveness of the system, and the results verify the favourable tracking ability and robustness.

Mechatronic Model Based Computed Torque Control of a Parallel Manipulator

Directory of Open Access Journals (Sweden)

Zhiyong Yang

2008-03-01

Full Text Available With high speed and accuracy the parallel manipulators have wide application in the industry, but there still exist many difficulties in the actual control process because of the time-varying and coupling. Unfortunately, the present-day commercial controlles cannot provide satisfying performance for its single axis linear control only. Therefore, aimed at a novel 2-DOF (Degree of Freedom parallel manipulator called Diamond 600, a motor-mechanism coupling dynamic model based control scheme employing the computed torque control algorithm are presented in this paper. First, the integrated dynamic coupling model is deduced, according to equivalent torques between the mechanical structure and the PM (Permanent Magnetism servomotor. Second, computed torque controller is described in detail for the above proposed model. At last, a series of numerical simulations and experiments are carried out to test the effectiveness of the system, and the results verify the favourable tracking ability and robustness.

The effects of retrieval ease on health issue judgments: implications for campaign strategies.

Science.gov (United States)

Chang, Chingching

2010-12-01

This paper examines the effects of retrieving information about a health ailment on judgments of the perceived severity of the disease and self-efficacy regarding prevention and treatment. The literature on metacognition suggests that recall tasks render two types of information accessible: the retrieved content, and the subjective experience of retrieving the content. Both types of information can influence judgments. Content-based thinking models hold that the more instances of an event people can retrieve, the higher they will estimate the frequency of the event to be. In contrast, experience-based thinking models suggest that when people experience difficulty in retrieving information regarding an event, they rate the event as less likely to occur. In the first experiment, ease of retrieval was manipulated by asking participants to list either a high or low number of consequences of an ailment. As expected, retrieval difficulty resulted in lower perceived disease severity. In the second experiment, ease of retrieval was manipulated by varying the number of disease prevention or treatment measures participants attempted to list. As predicted, retrieval difficulty resulted in lower self-efficacy regarding prevention and treatment. In experiment three, when information regarding a health issue was made accessible by exposure to public service announcements (PSAs), ease-of-retrieval effects were attenuated. Finally, in experiment four, exposure to PSAs encouraged content-based judgments when the issue was of great concern.

Toward High Performance in Industrial Refrigeration Systems

DEFF Research Database (Denmark)

Thybo, C.; Izadi-Zamanabadi, Roozbeh; Niemann, H.

2002-01-01

Achieving high performance in complex industrial systems requires information manipulation at different system levels. The paper shows how different models of same subsystems, but using different quality of information/data, are used for fault diagnosis as well as robust control design...

Towards high performance in industrial refrigeration systems

DEFF Research Database (Denmark)

Thybo, C.; Izadi-Zamanabadi, R.; Niemann, Hans Henrik

2002-01-01

Achieving high performance in complex industrial systems requires information manipulation at different system levels. The paper shows how different models of same subsystems, but using different quality of information/data, are used for fault diagnosis as well as robust control design...

Master-slave manipulator

International Nuclear Information System (INIS)

Haaker, L.W.; Jelatis, D.G.

1981-01-01

A remote control master-slave manipulator for performing work on the opposite side of a barrier wall, is described. The manipulator consists of a rotatable horizontal support adapted to extend through the wall and two longitudinally extensible arms, a master and a slave, pivotally connected one to each end of the support. (U.K.)

Leadership Manipulation and Ethics in Storytelling

OpenAIRE

Auvinen, Tommi; Lämsä, Anna-Maija; Sintonen, Teppo; Takala, Tuomo

2013-01-01

This article focuses on exerting influence in leadership, namely manipulation in storytelling. Manipulation is usually considered an unethical approach to leadership. We will argue that manipulation is a more complex phenomenon than just an unethical way of acting in leadership. We will demonstrate through an empirical qualitative study that there are various types of manipulation through storytelling. This article makes a contribution to the literature on manipulation through leadership stor...

Commercialization of JPL Virtual Reality calibration and redundant manipulator control technologies

Science.gov (United States)

Kim, Won S.; Seraji, Homayoun; Fiorini, Paolo; Brown, Robert; Christensen, Brian; Beale, Chris; Karlen, James; Eismann, Paul

1994-01-01

Within NASA's recent thrust for industrial collaboration, JPL (Jet Propulsion Laboratory) has recently established two technology cooperation agreements in the robotics area: one on virtual reality (VR) calibration with Deneb Robotics, Inc., and the other on redundant manipulator control with Robotics Research Corporation (RRC). These technology transfer cooperation tasks will enable both Deneb and RRC to commercialize enhanced versions of their products that will greatly benefit both space and terrestrial telerobotic applications.

Development of the mobile manipulator for inspection and maintenance in nuclear power plants and application of the modul devices

International Nuclear Information System (INIS)

Ohmichi, Takeo; Hosaka, Shigetaka; Nishihara, Masatoshi; Nakayama, Junji; Sato, Masatoshi

1986-01-01

In nuclear power stations, remote operation devices have been positively developed and applied, thus largely contributed to the reduction of the radiation exposure of workers. However, when requirements are diversified, the number of devices increases, and their management becomes complicated. The largest obstacle to the adaption of versatile robots in nuclear power stations is the environmental condition, and the small size for narrow space and the capability to withstand severe temperature, humidity and radiation must be ensured with high reliability. Mitsubishi Heavy Industries, Ltd. carried out the development of the manipulator for light works, which takes early counter-measures to the abnormality during operation, for five years as the subsidized project by the Ministry of International Trade and Industry. This robot is composed of a slave robot working in vessels and the central control system. The slave robot comprises a modular manipulator arm, the slave controller, a running carriage and the three-dimensional visual system. The components of the central control system are connected with optical fibers. The features and function and applicability of this manipulator are described. (Kako, I.)

MATHEMATICAL MODEL MANIPULATOR ROBOTS

Directory of Open Access Journals (Sweden)

O. N. Krakhmalev

2015-12-01

Full Text Available A mathematical model to describe the dynamics of manipulator robots. Mathematical model are the implementation of the method based on the Lagrange equation and using the transformation matrices of elastic coordinates. Mathematical model make it possible to determine the elastic deviations of manipulator robots from programmed motion trajectories caused by elastic deformations in hinges, which are taken into account in directions of change of the corresponding generalized coordinates. Mathematical model is approximated and makes it possible to determine small elastic quasi-static deviations and elastic vibrations. The results of modeling the dynamics by model are compared to the example of a two-link manipulator system. The considered model can be used when performing investigations of the mathematical accuracy of the manipulator robots.

Reliability of piping system components. Volume 1: Piping reliability - A resource document for PSA applications

Energy Technology Data Exchange (ETDEWEB)

Nyman, R; Erixon, S; Tomic, B; Lydell, B

1995-12-01

SKI has undertaken a multi-year research project to establish a comprehensive passive component failure database, validate failure rate parameter estimates and establish a model framework for integrating passive component failures in existing PSAs. Phase 1 of the project produced a relational database on worldwide piping system failure events in the nuclear and chemical industries. This phase 2 report gives a graphical presentation of piping system operating experience, and compares key failure mechanisms in commercial nuclear power plants and chemical process industry. Inadequacies of traditional PSA methodology are addressed, with directions for PSA methodology enhancements. A data-driven-and-systems-oriented analysis approach is proposed to enable assignment of unique identities to risk-significant piping system component failures. Sufficient operating experience does exist to generate quality data on piping failures. Passive component failures should be addressed by today`s PSAs to allow for aging analysis and effective, on-line risk management. 111 refs, 36 figs, 20 tabs.

Reliability of piping system components. Volume 1: Piping reliability - A resource document for PSA applications

International Nuclear Information System (INIS)

Nyman, R.; Erixon, S.; Tomic, B.; Lydell, B.

1995-12-01

SKI has undertaken a multi-year research project to establish a comprehensive passive component failure database, validate failure rate parameter estimates and establish a model framework for integrating passive component failures in existing PSAs. Phase 1 of the project produced a relational database on worldwide piping system failure events in the nuclear and chemical industries. This phase 2 report gives a graphical presentation of piping system operating experience, and compares key failure mechanisms in commercial nuclear power plants and chemical process industry. Inadequacies of traditional PSA methodology are addressed, with directions for PSA methodology enhancements. A data-driven-and-systems-oriented analysis approach is proposed to enable assignment of unique identities to risk-significant piping system component failures. Sufficient operating experience does exist to generate quality data on piping failures. Passive component failures should be addressed by today's PSAs to allow for aging analysis and effective, on-line risk management. 111 refs, 36 figs, 20 tabs

Differential Kinematics Of Contemporary Industrial Robots

Science.gov (United States)

Szkodny, T.

2014-08-01

The paper presents a simple method of avoiding singular configurations of contemporary industrial robot manipulators of such renowned companies as ABB, Fanuc, Mitsubishi, Adept, Kawasaki, COMAU and KUKA. To determine the singular configurations of these manipulators a global form of description of the end-effector kinematics was prepared, relative to the other links. On the basis of this description , the formula for the Jacobian was defined in the end-effector coordinates. Next, a closed form of the determinant of the Jacobian was derived. From the formula, singular configurations, where the determinant's value equals zero, were determined. Additionally, geometric interpretations of these configurations were given and they were illustrated. For the exemplary manipulator, small corrections of joint variables preventing the reduction of the Jacobian order were suggested. An analysis of positional errors, caused by these corrections, was presented

Adaptive control of robotic manipulators

Science.gov (United States)

Seraji, H.

1987-01-01

The author presents a novel approach to adaptive control of manipulators to achieve trajectory tracking by the joint angles. The central concept in this approach is the utilization of the manipulator inverse as a feedforward controller. The desired trajectory is applied as an input to the feedforward controller which behaves as the inverse of the manipulator at any operating point; the controller output is used as the driving torque for the manipulator. The controller gains are then updated by an adaptation algorithm derived from MRAC (model reference adaptive control) theory to cope with variations in the manipulator inverse due to changes of the operating point. An adaptive feedback controller and an auxiliary signal are also used to enhance closed-loop stability and to achieve faster adaptation. The proposed control scheme is computationally fast and does not require a priori knowledge of the complex dynamic model or the parameter values of the manipulator or the payload.

Using Manipulatives in Math Instruction.

Science.gov (United States)

Marzola, Eileen S.

1987-01-01

Guidelines for teachers to better use manipulatives in the teaching of mathematics to learning disabled learners are offered including a rationale for manipulatives, selection crteria, principles underlying productive use of manipulatives, and making the transition from the concrete to the symbolic. Suggested materials and distributors are listed.…

Balanced articulated manipulator

International Nuclear Information System (INIS)

Francois, Daniel; Germond, J.-C.; Marchal, Paul; Vertut, Jean.

1976-01-01

The description is given of a manipulator of the type comprising a master arm and a slave arm, capable of working in a containment restricted by a wall fitted with an aperture to introduce the slave arm into the containment. According to the invention this manipulator is permanently balanced irrespective of its distortions when it is secured to the wall of the containment in which it is desired to work. The entire manipulator is also balanced when being set up and when moved outside the containment, in relation to a supporting axle. This result is achieved in a simplified manner by giving homothetic shapes to the various component parts of the slave and master arms, the master arm having at least one balancing weight [fr

Mobile Robot and Mobile Manipulator Research Towards ASTM Standards Development.

Science.gov (United States)

Bostelman, Roger; Hong, Tsai; Legowik, Steven

2016-01-01

Performance standards for industrial mobile robots and mobile manipulators (robot arms onboard mobile robots) have only recently begun development. Low cost and standardized measurement techniques are needed to characterize system performance, compare different systems, and to determine if recalibration is required. This paper discusses work at the National Institute of Standards and Technology (NIST) and within the ASTM Committee F45 on Driverless Automatic Guided Industrial Vehicles. This includes standards for both terminology, F45.91, and for navigation performance test methods, F45.02. The paper defines terms that are being considered. Additionally, the paper describes navigation test methods that are near ballot and docking test methods being designed for consideration within F45.02. This includes the use of low cost artifacts that can provide alternatives to using relatively expensive measurement systems.

Direct Manipulation in Virtual Reality

Science.gov (United States)

Bryson, Steve

2003-01-01

Virtual Reality interfaces offer several advantages for scientific visualization such as the ability to perceive three-dimensional data structures in a natural way. The focus of this chapter is direct manipulation, the ability for a user in virtual reality to control objects in the virtual environment in a direct and natural way, much as objects are manipulated in the real world. Direct manipulation provides many advantages for the exploration of complex, multi-dimensional data sets, by allowing the investigator the ability to intuitively explore the data environment. Because direct manipulation is essentially a control interface, it is better suited for the exploration and analysis of a data set than for the publishing or communication of features found in that data set. Thus direct manipulation is most relevant to the analysis of complex data that fills a volume of three-dimensional space, such as a fluid flow data set. Direct manipulation allows the intuitive exploration of that data, which facilitates the discovery of data features that would be difficult to find using more conventional visualization methods. Using a direct manipulation interface in virtual reality, an investigator can, for example, move a data probe about in space, watching the results and getting a sense of how the data varies within its spatial volume.

Geometric control of manipulators

International Nuclear Information System (INIS)

Thiruarooran, C.

1996-01-01

Resolved motion control enables the end effector to be moved as a rigid body in space without having to work out manually the joint combinations needed. Since a rigid body in space has three independent translational and three independent rotational movements, a manipulator with at least six joints can be controlled in this way. Normally the manipulator has more than six joints providing an infinite number of ways of moving the tip in the desired direction and this redundancy can be exploited in a variety of ways. Resolved motion tests performed on a hydraulically operated heavy duty manipulator at the Dungeness nuclear power plant are described. The results have shown that manipulators with as many as ten joints can be controlled under resolved tip motion and the areas which are critical to the performance of this type of control have been identified. (UK)

Control of a flexible bracing manipulator: Integration of current research work to realize the bracing manipulator

Science.gov (United States)

Kwon, Dong-Soo

1991-01-01

All research results about flexible manipulator control were integrated to show a control scenario of a bracing manipulator. First, dynamic analysis of a flexible manipulator was done for modeling. Second, from the dynamic model, the inverse dynamic equation was derived, and the time domain inverse dynamic method was proposed for the calculation of the feedforward torque and the desired flexible coordinate trajectories. Third, a tracking controller was designed by combining the inverse dynamic feedforward control with the joint feedback control. The control scheme was applied to the tip position control of a single link flexible manipulator for zero and non-zero initial condition cases. Finally, the contact control scheme was added to the position tracking control. A control scenario of a bracing manipulator is provided and evaluated through simulation and experiment on a single link flexible manipulator.

Modeling the manipulator and flipper pose effects on tip over stability of a tracked mobile manipulator

CSIR Research Space (South Africa)

Dube, C

2011-11-01

Full Text Available Mobile manipulators are used in a number of different applications such as bomb disposal, mining robotics, and search and rescue operations. These mobile manipulators are highly susceptible to tip over due to the motion of the manipulator...

In Praise of Manipulation

NARCIS (Netherlands)

Dowding, Keith; Van Hees, Martin

Many theorists believe that the manipulation of voting procedures is a serious problem. Accordingly, much of social choice theory examines the conditions under which strategy-proofness can be ensured, and what kind of procedures do a better job of preventing manipulation. This article argues that

Powered manipulator control arm

International Nuclear Information System (INIS)

Le Mouee, Theodore; Vertut, Jean; Marchal, Paul; Germon, J.C.; Petit, Michel

1975-01-01

A remote operated control arm for powered manipulators is described. It includes an assembly allowing several movements with position sensors for each movement. The number of possible arm movements equals the number of possible manipulator movements. The control systems may be interrupted as required. One part of the arm is fitted with a system to lock it with respect to another part of the arm without affecting the other movements, so long as the positions of the manipulator and the arm have not been brought into complete coincidence. With this system the locking can be ended when complete concordance is achieved [fr

The direct manipulation shell

International Nuclear Information System (INIS)

Allen, M.E.; Christiansen, M.

1992-01-01

Accelerator controls systems provide parameter display pages which allow the operator to monitor and manipulate selected control points in the system. Display pages are generally implemented as either hand-crafted, purpose-built programs; or by using a specialized display page layout tool. These two methods of display page development exhibit the classic trade-off between functionality vs. ease of implementation. In the Direct Manipulation Shell we approach the process of developing a display page in a manifestly object-oriented manner. This is done by providing a general framework for interactively instantiating and manipulating display objects. (author)

Image manipulation as research misconduct.

Science.gov (United States)

Parrish, Debra; Noonan, Bridget

2009-06-01

A growing number of research misconduct cases handled by the Office of Research Integrity involve image manipulations. Manipulations may include simple image enhancements, misrepresenting an image as something different from what it is, and altering specific features of an image. Through a study of specific cases, the misconduct findings associated with image manipulation, detection methods and those likely to identify such manipulations, are discussed. This article explores sanctions imposed against guilty researchers and the factors that resulted in no misconduct finding although relevant images clearly were flawed. Although new detection tools are available for universities and journals to detect questionable images, this article explores why these tools have not been embraced.

Long-reach manipulators for decommissioning

International Nuclear Information System (INIS)

Webster, D.A.; Challinor, S.F.

1993-01-01

A survey of redundant facilities at Sellafield has identified that in many cases the conventional means of deploying remote handling equipment are not appropriate and that novel means must be employed. However, decommissioning is not a value adding activity and so expensive one off designs must be avoided. The paper will describe BNFL's approach to the synthesis from proprietary parts of a manipulator which can lift 3 te at a horizontal reach of over 5 metres and yet can still perform the dextrous manipulation necessary to remove small items. It will also cover the development of the manipulator control systems and the adaption of commercial handtools to be manipulator friendly. (author)

The Manipulative Discourse of Gandalf

Directory of Open Access Journals (Sweden)

Farid Mohammadi

2014-07-01

Full Text Available The aim of this essay is to investigate discursive, cognitive and social aspects of manipulation in regard to the dialogues of the literary fictional character of Gandalf in the trilogy of The Lord of the Rings. Accordingly, the researcher has taken a multidisciplinary approach to an account of discursive manipulation, and focuses on the cognitive dimensions of manipulation. As a result, the researcher demonstrates meticulously how manipulation involves intensifying the power, moral superiority and the credibility of the speaker(s, while abusing the others (recipients, along with an emotional and attractive way of expression, and supplemented by reasonable facts and documents in regard to a specific issue.

FY 1992 Research and development project for industrial science and technology. Part 1/2. Report on results of the R and D project for atomic/molecular level extreme manipulation technologies; 1992 nendo genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho. 1/2

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-09-01

Described herein are the FY 1992 results of the survey, research and development project aimed at establishment of the technologies for observing/manipulating atoms and molecules as the common basic technologies for various industrial areas, e.g., new materials, electronics, biotechnology and chemistry. The R and D program for the technologies for observing/manipulating atoms/molecules on solid surfaces involve studies on possibility of surface process controlling aided by, e.g., various mechanical probing techniques and electron beams, and on device structures and analytical procedures for measurement/analysis of the dynamic steps of atomic/molecular processes, producing the basic findings. Observation of hydrogen atoms adsorbed on Si surfaces is started anew, using a newly introduced superhigh-precision surface analysis/controlling device. Knowledge is obtained for research and development of the technologies for observing/manipulating a group of atoms within a space, observing/manipulating structures of organic compounds or the like, and atomic/molecular process theories , among others, through surveys of overseas situations, invitation of researchers, international workshops, technological information exchanges, etc. (NEDO)

Multivariable Frequency Response Functions Estimation for Industrial Robots

NARCIS (Netherlands)

Hardeman, T.; Aarts, Ronald G.K.M.; Jonker, Jan B.

2005-01-01

The accuracy of industrial robots limits its applicability for high demanding processes, like robotised laser welding. We are working on a nonlinear exible model of the robot manipulator to predict these inaccuracies. This poster presents the experimental results on estimating the Multivariable

CLIMAN - a mobile manipulator concept

International Nuclear Information System (INIS)

Noltingk, B.E.; Owen, C.K.V.

With increasing age the integrity of more remote parts of reactors, such as the core restraints, is questioned so there is a need for a means of access to these places to carry out inspection, minor repairs and alterations. Conventional standpipe manipulators are about 20 m long so that extending them further presents difficulties of load capacity, rigidity, dexterity and control which must increase steeply with range. The proposal outlined here is for a mobile manipulator which can climb at the end of a cable (CLImbing MANipulator - CLIMAN) into a reactor and reach well beyond the range of a fixed base machine. In addition to virtually unlimited range such a mobile manipulator has twice as many degrees of freedom as a fixed base machine. Its body or base can be manoeuvred with six degrees of freedom so as to obtain the maximum coverage and obstacle avoidance for its manipulator. It is proposed that it should be manually controlled. (author)

Portraits made to measure: manipulating social judgments about individuals with a statistical face model.

Science.gov (United States)

Walker, Mirella; Vetter, Thomas

2009-10-13

The social judgments people make on the basis of the facial appearance of strangers strongly affect their behavior in different contexts. However, almost nothing is known about the physical information underlying these judgments. In this article, we present a new technology (a) to quantify the information in faces that is used for social judgments and (b) to manipulate the image of a human face in a way which is almost imperceptible but changes the personality traits ascribed to the depicted person. This method was developed in a high-dimensional face space by identifying vectors that capture maximum variability in judgments of personality traits. Our method of manipulating the salience of these vectors in faces was successfully transferred to novel photographs from an independent database. We evaluated this method by showing pairs of face photographs which differed only in the salience of one of six personality traits. Subjects were asked to decide which face was more extreme with respect to the trait in question. Results show that the image manipulation produced the intended attribution effect. All response accuracies were significantly above chance level. This approach to understanding and manipulating how a person is socially perceived could be useful in psychological research and could also be applied in advertising or the film industries.

Interpersonal relationship manipulation at a personal level

Directory of Open Access Journals (Sweden)

Andreja Hribernik

2010-12-01

Full Text Available Manipulation is not unknown or strange to any of us. We have all experienced it, or perhaps even practiced it. It is wrong not to recognize it, to find excuses for it, and, above all, it is wrong not to decide to change one’s behaviour. Long-lasting use of manipulation leaves consequences on all the parties involved: the victim, the observer and the perpetrator. Manipulation is a relation between persons which does not consider the needs of everybody involved. It means exploitation and misleading, inhumane and unethical behaviour on the part of the manipulator, which he uses in order gain success, self-confirmation and to achieve his goals. In the act of manipulation personal boundaries of the other person are violated since the manipulator enforces his dominance and subjectedness of the victim. The manipulator invades the victim’s personal integrity, limiting their potential. He isolates, controls and intimidates them; by devises a system to catch the victims, to entangle them in his net and suck them up like a spider. If the manipulation is very successful, the other person does not recognize it as such; they consider themselves happy to be cooperating with the manipulator, as they identify his goals as their own. Therefore, the manipulator can be said to have stolen the manipulated person’s soul.

Simulation of robot manipulators

International Nuclear Information System (INIS)

Kress, R.L.; Babcock, S.M.; Bills, K.C.; Kwon, D.S.; Schoenwald, D.A.

1995-01-01

This paper describes Oak Ridge National Laboratory's development of an environment for the simulation of robotic manipulators. Simulation includes the modeling of kinematics, dynamics, sensors, actuators, control systems, operators, and environments. Models will be used for manipulator design, proposal evaluation, control system design and analysis, graphical preview of proposed motions, safety system development, and training. Of particular interest is the development of models for robotic manipulators having at least one flexible link. As a first application, models have been developed for the Pacific Northwest Laboratories' Flexible Beam Testbed which is a one-Degree-Of-Freedom, flexible arm with a hydraulic base actuator. Initial results show good agreement between model and experiment

A six degrees of freedom mems manipulator

NARCIS (Netherlands)

de Jong, B.R.

2006-01-01

This thesis reports about a six degrees of freedom (DOF) precision manipulator in MEMS, concerning concept generation for the manipulator followed by design and fabrication (of parts) of the proposed manipulation concept in MEMS. Researching the abilities of 6 DOF precision manipulation in MEMS is

A control method for manipulators with redundancy

International Nuclear Information System (INIS)

Furusho, Junji; Usui, Hiroyuki

1989-01-01

Redundant manipulators have more ability than nonredundant ones in many aspects such as avoiding obstacles, avoiding singular states, etc. In this paper, a control algorithm for redundant manipulators working under the circumstance in the presence of obstacles is presented. First, the measure of manipulability for robot manipulators under obstacle circumstances is defined. Then, the control algorithm for the obstacle avoidance is derived by using this measure of manipulability. The obstacle avoidance and the maintenance of good posture are simultaneously achieved by this algorithm. Lastly, an experiment and simulation results using an eight degree of freedom manipulator are shown. (author)

Computer control of a multi-link manipulator

International Nuclear Information System (INIS)

Holt, J.E.; Thiruarooran, C.

1988-01-01

The Central Electricity Generating Board has a requirement for a manipulator which can deploy to its work location around obstacles. A multilink manipulator has been designed for this purpose. A computer control system designed to ease manipulator operation is described. Using the control program, the manipulator may be deployed using just 2 joysticks. Experience in the use of the program with an inspection manipulator at Sizewell 'A' Nuclear Power Station is discussed. When used to control a manipulator of 9 hydraulically actuated degrees of freedom, a control accuracy of about 1.5% of full extension has been achieved. (author)

Industrial process heat usage in the United States

International Nuclear Information System (INIS)

1981-03-01

The purpose of this report is to identify and evaluate sources of information on industrial energy consumption, which can serve as a reference for assessing the market potential of HTGR programs and thereby provide a consistent information base for all applications programs. The report provides information on interpretation of energy use data, definition of the industrial sector, energy use by the industrial sector and other sectors, and use within the industrial sector by industry type and service demand. The report also reviews several data sources and presents historical data and projections on industrial energy consumption. These data and projections are taken from the sources which appear to be most representative of the actual market and most useful with respect to manipulation of data to provide information needed for HTGR programs

Dynamic Control of Kinematically Redundant Robotic Manipulators

Directory of Open Access Journals (Sweden)

Erling Lunde

1987-07-01

Full Text Available Several methods for task space control of kinematically redundant manipulators have been proposed in the literature. Most of these methods are based on a kinematic analysis of the manipulator. In this paper we propose a control algorithm in which we are especially concerned with the manipulator dynamics. The algorithm is particularly well suited for the class of redundant manipulators consisting of a relatively small manipulator mounted on a larger positioning part.

Learning Area and Perimeter with Virtual Manipulatives

Science.gov (United States)

Bouck, Emily; Flanagan, Sara; Bouck, Mary

2015-01-01

Manipulatives are considered a best practice for educating students with disabilities, but little research exists which examines virtual manipulatives as tool for supporting students in mathematics. This project investigated the use of a virtual manipulative through the National Library of Virtual Manipulatives--polynominoes (i.e., tiles)--as a…

High precision redundant robotic manipulator

International Nuclear Information System (INIS)

Young, K.K.D.

1998-01-01

A high precision redundant robotic manipulator for overcoming contents imposed by obstacles or imposed by a highly congested work space is disclosed. One embodiment of the manipulator has four degrees of freedom and another embodiment has seven degrees of freedom. Each of the embodiments utilize a first selective compliant assembly robot arm (SCARA) configuration to provide high stiffness in the vertical plane, a second SCARA configuration to provide high stiffness in the horizontal plane. The seven degree of freedom embodiment also utilizes kinematic redundancy to provide the capability of avoiding obstacles that lie between the base of the manipulator and the end effector or link of the manipulator. These additional three degrees of freedom are added at the wrist link of the manipulator to provide pitch, yaw and roll. The seven degrees of freedom embodiment uses one revolute point per degree of freedom. For each of the revolute joints, a harmonic gear coupled to an electric motor is introduced, and together with properly designed based servo controllers provide an end point repeatability of less than 10 microns. 3 figs

Bioprinting Living Biofilms through Optogenetic Manipulation.

Science.gov (United States)

Huang, Yajia; Xia, Aiguo; Yang, Guang; Jin, Fan

2018-04-18

In this paper, we present a new strategy for microprinting dense bacterial communities with a prescribed organization on a substrate. Unlike conventional bioprinting techniques that require bioinks, through optogenetic manipulation, we directly manipulated the behaviors of Pseudomonas aeruginosa to allow these living bacteria to autonomically form patterned biofilms following prescribed illumination. The results showed that through optogenetic manipulation, patterned bacterial communities with high spatial resolution (approximately 10 μm) could be constructed in 6 h. Thus, optogenetic manipulation greatly increases the range of available bioprinting techniques.

Master-slave-manipulator 'EMSM I'

International Nuclear Information System (INIS)

Koehler, G.W.; Salaske, M.

1976-01-01

A master-slave manipulator with electric force transmission and reflection was developed for the first time in the German Federal Republic. The apparatus belongs to the class of 200 N carrying capacity. It is intended mainly for nuclear purposes and especially for use in large hot cells and also for medium and heavy manipulator vehicles. The most innovations compared with previously known foreign electric master-slave manipulators are two additional possibilities of movement and the electric dead weight compensation. (orig.) [de

Master-slave-manipulator EMSM I

International Nuclear Information System (INIS)

Koehler, G.W.; Salaske, M.

1976-01-01

A master-slave manipulator with electric force transmission and reflection was developed for the first time in the German Federal Republic. The aparatus belongs to the class of 200 N carrying capacity. It is intended mainly for nuclear purposes and especially for use in large hot cells and also for medium and heavy manipulator vehicles. The most obvious innovations compared with previously known foreign electric master-slave manipulators are two additional possibilities of movement and the electric dead weightcompensation. (orig.) [de

Using Manipulatives to Teach Elementary Mathematics

Science.gov (United States)

Boggan, Matthew; Harper, Sallie; Whitmire, Anna

2010-01-01

The purpose of this paper is to explain the importance and benefits of math manipulatives. For decades, the National Council of Teachers of Mathematics has encouraged school districts nationwide to use manipulatives in mathematical instruction. The value of manipulatives has been recognized for many years, but some teachers are reluctant to use…

Visual Servoing for Object Manipulation: A Case Study in Slaughterhouse

DEFF Research Database (Denmark)

Wu, Haiyan; Andersen, Thomas Timm; Andersen, Nils Axel

2016-01-01

Automation for slaughterhouse challenges the design of the control system due to the variety of the objects. Realtime sensing provides instantaneous information about each piece of work and thus, is useful for robotic system developed for slaughterhouse. In this work, a pick and place task which....... An online and offline combined path planning algorithm is proposed to generate the desired path for the robot control. An industrial robot arm is applied to execute the path. The system is implemented for a lab-scale experiment, and the results show a high success rate of object manipulation in the pick...

Kinematic modeling of a 7-degree of freedom spatial hybrid manipulator for medical surgery.

Science.gov (United States)

Singh, Amanpreet; Singla, Ekta; Soni, Sanjeev; Singla, Ashish

2018-01-01

The prime objective of this work is to deal with the kinematics of spatial hybrid manipulators. In this direction, in 1955, Denavit and Hartenberg proposed a consistent and concise method, known as D-H parameters method, to deal with kinematics of open serial chains. From literature review, it is found that D-H parameter method is widely used to model manipulators consisting of lower pairs. However, the method leads to ambiguities when applied to closed-loop, tree-like and hybrid manipulators. Furthermore, in the dearth of any direct method to model closed-loop, tree-like and hybrid manipulators, revisions of this method have been proposed from time-to-time by different researchers. One such kind of revision using the concept of dummy frames has successfully been proposed and implemented by the authors on spatial hybrid manipulators. In that work, authors have addressed the orientational inconsistency of the D-H parameter method, restricted to body-attached frames only. In the current work, the condition of body-attached frames is relaxed and spatial frame attachment is considered to derive the kinematic model of a 7-degree of freedom spatial hybrid robotic arm, along with the development of closed-loop constraints. The validation of the new kinematic model has been performed with the help of a prototype of this 7-degree of freedom arm, which is being developed at Council of Scientific & Industrial Research-Central Scientific Instruments Organisation Chandigarh to aid the surgeon during a medical surgical task. Furthermore, the developed kinematic model is used to develop the first column of the Jacobian matrix, which helps in providing the estimate of the tip velocity of the 7-degree of freedom manipulator when the first joint velocity is known.

Nano-manipulation of single DNA molecules

International Nuclear Information System (INIS)

Hu Jun; Shanghai Jiaotong Univ., Shanghai; Lv Junhong; Wang Guohua; Wang Ying; Li Minqian; Zhang Yi; Li Bin; Li Haikuo; An Hongjie

2004-01-01

Nano-manipulation of single atoms and molecules is a critical technique in nanoscience and nanotechnology. This review paper will focus on the recent development of the manipulation of single DNA molecules based on atomic force microscopy (AFM). Precise manipulation has been realized including varied manipulating modes such as 'cutting', 'pushing', 'folding', 'kneading', 'picking up', 'dipping', etc. The cutting accuracy is dominated by the size of the AFM tip, which is usually 10 nm or less. Single DNA fragments can be cut and picked up and then amplified by single molecule PCR. Thus positioning isolation and sequencing can be performed. (authors)

A Comparison Study on Motion/Force Transmissibility of Two Typical 3-DOF Parallel Manipulators: The Sprint Z3 and A3 Tool Heads

Directory of Open Access Journals (Sweden)

Xiang Chen

2014-01-01

Full Text Available This paper presents a comparison study of two important three-degree-of-freedom (DOF parallel manipulators, the Sprint Z3 head and the A3 head, both commonly used in industry. As an initial step, the inverse kinematics are derived and an analysis of two classes of limbs is carried out via screw theory. For comparison, three transmission indices are then defined to describe their motion/force transmission performance. Based on the same main parameters, the compared results reveal some distinct characteristics in addition to the similarities between the two parallel manipulators. To a certain extent, the A3 head outperforms the common Sprint Z3 head, providing a new and satisfactory option for a machine tool head in industry.

Task based synthesis of serial manipulators

Directory of Open Access Journals (Sweden)

Sarosh Patel

2015-05-01

Full Text Available Computing the optimal geometric structure of manipulators is one of the most intricate problems in contemporary robot kinematics. Robotic manipulators are designed and built to perform certain predetermined tasks. There is a very close relationship between the structure of the manipulator and its kinematic performance. It is therefore important to incorporate such task requirements during the design and synthesis of the robotic manipulators. Such task requirements and performance constraints can be specified in terms of the required end-effector positions, orientations and velocities along the task trajectory. In this work, we present a comprehensive method to develop the optimal geometric structure (DH parameters of a non-redundant six degree of freedom serial manipulator from task descriptions. In this work we define, develop and test a methodology to design optimal manipulator configurations based on task descriptions. This methodology is devised to investigate all possible manipulator configurations that can satisfy the task performance requirements under imposed joint constraints. Out of all the possible structures, the structures that can reach all the task points with the required orientations are selected. Next, these candidate structures are tested to see whether they can attain end-effector velocities in arbitrary directions within the user defined joint constraints, so that they can deliver the best kinematic performance. Additionally least power consuming configurations are also identified.

Stainless steel decontamination manipulators

International Nuclear Information System (INIS)

Sullivan, R.J.

1986-01-01

Three, large-volume coverage manipulator systems were designed and built for the Defense Water Processing Facility at the Savannah River Laboratory. These stainless steel systems will be used for high-pressure spray decontamination of waste containers and large process equipment modules. Each system has a manipulator arm, folding boom, and vertical drive and guide structure. Handling capacity is 45 kg, horizontal reach is 4.6 m with a 180-deg swing motion, and the vertical travel is 6 m. The system is remotely removable and replaceable in modules using an overhead crane and an impact wrench. The manipulator arm has seven motions: Shoulder rotation and pivot, elbow pivot, wrist pivot and rotation, and grip open-close. All motions are variable speed and are slip-clutch protected to prevent overloading from external forces (collisions)

A Skill-based Robot Co-worker for Industrial Maintenance Tasks

DEFF Research Database (Denmark)

Koch, Paul Jacob; van Amstel, Marike Koch; Dębska, Patrycja

2017-01-01

This paper investigates the concept of a sensor based robot co-worker working in flexible industrial environments together with and alongside human operators. In this particular work, a realisation of a robot co-worker scenario is developed in order to demonstrate the implementation of a robot co......-worker from the starting point of an autonomous industrial mobile manipulator. The cobot is applied on the industrially relevant task of screwing by the use of a skill-based approach. The technical work on the human-robot interface and the screwing skill is described....

Chemical products and industrial materials

International Nuclear Information System (INIS)

1995-12-01

A compilation of all universities, industrial and governmental agencies in Quebec which are actively involved in research and development of chemical products and industrial materials derived from biomass products, was presented. Each entry presented in a standard format that included a description of the major research activities of the university or agency, the principal technologies used in the research, available research and analytical equipment, a description of the research personnel, names, and addresses of contact persons for the agency or university. Thirty entries were presented. These covered a wide diversity of activities including biotechnological research such as genetic manipulations, bioconversion, fermentation, enzymatic hydrolysis and physico-chemical applications such as bleaching, de-inking, purification and synthesis. tabs

3D Laser Scanner for Underwater Manipulation.

Science.gov (United States)

Palomer, Albert; Ridao, Pere; Youakim, Dina; Ribas, David; Forest, Josep; Petillot, Yvan

2018-04-04

Nowadays, research in autonomous underwater manipulation has demonstrated simple applications like picking an object from the sea floor, turning a valve or plugging and unplugging a connector. These are fairly simple tasks compared with those already demonstrated by the mobile robotics community, which include, among others, safe arm motion within areas populated with a priori unknown obstacles or the recognition and location of objects based on their 3D model to grasp them. Kinect-like 3D sensors have contributed significantly to the advance of mobile manipulation providing 3D sensing capabilities in real-time at low cost. Unfortunately, the underwater robotics community is lacking a 3D sensor with similar capabilities to provide rich 3D information of the work space. In this paper, we present a new underwater 3D laser scanner and demonstrate its capabilities for underwater manipulation. In order to use this sensor in conjunction with manipulators, a calibration method to find the relative position between the manipulator and the 3D laser scanner is presented. Then, two different advanced underwater manipulation tasks beyond the state of the art are demonstrated using two different manipulation systems. First, an eight Degrees of Freedom (DoF) fixed-base manipulator system is used to demonstrate arm motion within a work space populated with a priori unknown fixed obstacles. Next, an eight DoF free floating Underwater Vehicle-Manipulator System (UVMS) is used to autonomously grasp an object from the bottom of a water tank.

Manipulating Strings in Python

Directory of Open Access Journals (Sweden)

William J. Turkel

2012-07-01

Full Text Available This lesson is a brief introduction to string manipulation techniques in Python. Knowing how to manipulate strings plays a crucial role in most text processing tasks. If you’d like to experiment with the following lessons, you can write and execute short programs as we’ve been doing, or you can open up a Python shell / Terminal to try them out on the command line.

System Integration for Real-time Mobile Manipulation

OpenAIRE

Oftadeh, Reza; Aref, Mohammad M.; Ghabcheloo, Reza; Mattila, Jouni

2014-01-01

Mobile manipulators are one of the most complicated types of mechatronics systems. The performance of these robots in performing complex manipulation tasks is highly correlated with the synchronization and integration of their low-level components. This paper discusses in detail the mechatronics design of a four wheel steered mobile manipulator. It presents the manipulator ’s mechanical structure and electrical interfaces, designs low-level software architecture based on embedded PC-based con...

Modeling manipulation in medical education.

Science.gov (United States)

Dailey, Jason I

2010-05-01

As residents and medical students progress through their medical training, they are presented with multiple instances in which they feel they must manipulate the healthcare system and deceive others in order to efficiently treat their patients. This, however, creates a culture of manipulation resulting in untoward effects on trainees' ethical and professional development. Yet manipulation need not be a skill necessary to practice medicine, and steps should be taken by both individuals and institutions to combat the view that the way medicine must be practiced "in the real world" is somehow different from what one's affective moral sense implores.

Professional responsibility in relation to cervical spine manipulation.

Science.gov (United States)

Refshauge, Kathryn M; Parry, Sharon; Shirley, Debra; Larsen, Dale; Rivett, Darren A; Boland, Rob

2002-01-01

Manipulation of the cervical spine is one of the few potentially life-threatening procedures performed by physiotherapists. Is it worth the risk? A comparison of risks versus benefits indicates that at present, the risks of cervical manipulation outweigh the benefits: manipulation has yet to be shown to be more effective for neck pain and headache than other interventions such as mobilisation, whereas the risks, although infrequent, are serious. This analysis is of particular concern because the conditions for which manipulation is indicated are benign and usually self-limiting. Because physiotherapists have legal and ethical obligations to the community to avoid foreseeable harm and provide optimum care, it may be prudent to determine who in our profession should perform cervical manipulation. That is, the profession could restrict the practice of cervical spine manipulation. Although all registered physiotherapists in Australia are entitled to perform cervical manipulation, few choose to use this intervention. Therefore, it might be feasible to encourage those practitioners who wish to use cervical manipulation to undertake formal education programs. Such a requirement could be embodied in a code of practice that discourages those without formal training from performing cervical manipulation. By taking such measures, we could ensure that our profession exercises wisdom in its monitoring and use of cervical manipulation.

An Analysis of Manipulation Strategies in Stock Markets

OpenAIRE

Rasim Ozcan

2012-01-01

Manipulative transactions, which affect both the supply and demand side of the markets, have been studied by academic circles and it was concluded that manipulation exerts negative impact on markets. A market with manipulation is considered as less trustworthy and credible compared to a market without manipulation, which in turn, affects demand. Manipulations affecting both the supply and demand should be closely monitored by stock market investors as well as legislative, executive, and regul...

The Anatomy of Virtual Manipulative Apps: Using Grounded Theory to Conceptualize and Evaluate Educational Apps that Contain Virtual Manipulatives

OpenAIRE

Boyer-Thurgood, Jennifer M.

2017-01-01

This exploratory qualitative study used grounded theory to investigate the anatomy of educational apps that contain virtual manipulatives. For this study 100 virtual manipulatives within educational apps designed for the iPad were observed by the researcher in order to expand the explanations of and build theory about virtual manipulatives within apps. Affordance theory was used to frame all six phases of the study in which the researcher identified virtual manipulatives situated within educa...

Probabilistic approach to manipulator kinematics and dynamics

International Nuclear Information System (INIS)

Rao, S.S.; Bhatti, P.K.

2001-01-01

A high performance, high speed robotic arm must be able to manipulate objects with a high degree of accuracy and repeatability. As with any other physical system, there are a number of factors causing uncertainties in the behavior of a robotic manipulator. These factors include manufacturing and assembling tolerances, and errors in the joint actuators and controllers. In order to study the effect of these uncertainties on the robotic end-effector and to obtain a better insight into the manipulator behavior, the manipulator kinematics and dynamics are modeled using a probabilistic approach. Based on the probabilistic model, kinematic and dynamic performance criteria are defined to provide measures of the behavior of the robotic end-effector. Techniques are presented to compute the kinematic and dynamic reliabilities of the manipulator. The effects of tolerances associated with the various manipulator parameters on the reliabilities are studied. Numerical examples are presented to illustrate the procedures

3D Laser Scanner for Underwater Manipulation

Directory of Open Access Journals (Sweden)

Albert Palomer

2018-04-01

Full Text Available Nowadays, research in autonomous underwater manipulation has demonstrated simple applications like picking an object from the sea floor, turning a valve or plugging and unplugging a connector. These are fairly simple tasks compared with those already demonstrated by the mobile robotics community, which include, among others, safe arm motion within areas populated with a priori unknown obstacles or the recognition and location of objects based on their 3D model to grasp them. Kinect-like 3D sensors have contributed significantly to the advance of mobile manipulation providing 3D sensing capabilities in real-time at low cost. Unfortunately, the underwater robotics community is lacking a 3D sensor with similar capabilities to provide rich 3D information of the work space. In this paper, we present a new underwater 3D laser scanner and demonstrate its capabilities for underwater manipulation. In order to use this sensor in conjunction with manipulators, a calibration method to find the relative position between the manipulator and the 3D laser scanner is presented. Then, two different advanced underwater manipulation tasks beyond the state of the art are demonstrated using two different manipulation systems. First, an eight Degrees of Freedom (DoF fixed-base manipulator system is used to demonstrate arm motion within a work space populated with a priori unknown fixed obstacles. Next, an eight DoF free floating Underwater Vehicle-Manipulator System (UVMS is used to autonomously grasp an object from the bottom of a water tank.

A portable modular architecture for robotic manipulator control

International Nuclear Information System (INIS)

Butler, P.L.

1993-01-01

A control architecture has been developed to provide a framework for robotic manipulator control. This architecture, called the Modular Integrated Control Architecture (MICA), has been successfully applied to two different manipulator systems. MICA is a portable system in two respects. First, it can be used for the control of different types of manipulator systems. Second, the MICA code is portable across several operating environments. This portability allows the sharing of common control code among various systems. A major portion of MICA is the precise control of multiple processors that have to be coordinated to control a manipulator system. By having NUCA control the processor synchronization, the system developer can concentrate on the specific aspects of a new manipulator system. MICA also provides standard functions for trajectory generation that can be used for most manipulators. Custom trajectory generators can be easily added to suit the needs of a particular robotic control system. Another facility that MICA provides is a simulation of the manipulator, allowing the control code to be simulated before trying it on a manipulator system. Using this technique, one can develop code for a manipulator system without risking damage to the arm during development

Managerial Incentives and Stock Price Manipulation

OpenAIRE

Peng, Lin; Röell, Ailsa A

2009-01-01

This paper presents a rational expectations model of optimal executive compensation in a setting where managers are in a position to manipulate short-term stock prices, and managers' propensity to manipulate is uncertain. Stock-based incentives elicit not only productive effort, but also costly information manipulation. We analyze the tradeoffs involved in conditioning pay on long- versus short-term performance and characterize a second-best optimal compensation scheme. The paper shows manipu...

Kinematic sensitivity of robot manipulators

Science.gov (United States)

Vuskovic, Marko I.

1989-01-01

Kinematic sensitivity vectors and matrices for open-loop, n degrees-of-freedom manipulators are derived. First-order sensitivity vectors are defined as partial derivatives of the manipulator's position and orientation with respect to its geometrical parameters. The four-parameter kinematic model is considered, as well as the five-parameter model in case of nominally parallel joint axes. Sensitivity vectors are expressed in terms of coordinate axes of manipulator frames. Second-order sensitivity vectors, the partial derivatives of first-order sensitivity vectors, are also considered. It is shown that second-order sensitivity vectors can be expressed as vector products of the first-order sensitivity vectors.

A links manipulator simulation program interim report

International Nuclear Information System (INIS)

Noble, R.A.

1987-04-01

A computer program to simulate the performance of the Heysham II rail-following manipulator has been developed. The program is being used to develop and test the rail-following control algorithms which will be used to control movements of the manipulator when it is operating below the gas baffle dome. The simulation includes the dynamic responses of the manipulator joint drives, excluding friction, backlash and compliance. It also includes full details of the manipulator's geometry. A method is given whereby the actual manipulator dynamics can be written into the program once these have been established by measurement. The program is written in FORTRAN and runs on a Perkin-Elmer 3220 mini-computer. The simulation program responds to velocity demands on the individual joints. These will normally come from the control program, in which they will be manually controlled by a joystick. A sigma 5664 colour graphics generator is programmed to display the current position of the manipulator. (UK)

Manipulators

International Nuclear Information System (INIS)

Andre, Y.; Routelous, F.; Spina, G.; Perpina, J.; Suquet, J.; Rossi, M.; Zanca, M.; Billiet, A.; Madec, L.; Lemoine, T.; Gaboriaud, G.; Aubert, B.; Rosenwald, J.C.; Neuenschwander, S.; Brisse, H.; Rehel, J.L.; Rebibo, G.; Bensimon, J.L.; Kulski, A.; Serhal, M.; Nguyen, K.V.; Lescure, R.; Cymbalista, M.

2005-01-01

Three articles have for purpose the radiation doses optimization in medical imaging. The first one concerns the radiation protection of manipulators working at a PET scan post, the second one concerns more particularly the optimization of doses delivered in pediatric computerized tomography, the third one is devoted to a comparison between radiation dose and image quality through scanners of adult temporal bone. (N.C.)

Managing collaboration in the nanoManipulator

DEFF Research Database (Denmark)

Hudson, Thomas C.; Heiser, Aron T.; Sonnenwald, Diane H.

2003-01-01

We designed, developed, deployed, and evaluated the Collaborative nanoManipulator (CnM), a system supporting remote collaboration between users of the nanoManipulator interface to atomic force microscopes. To be accepted by users, the shared nanoManipulator application had to have the same high...... level of interactivity as the single user system and the application had to support a user's ability to interleave working privately and working collaboratively. This paper briefly describes the entire collaboration system, but focuses on the shared nanoManipulator application. Based on our experience...... developing the CnM, we present: a method of analyzing applications to characterize the requirements for sharing data between collaborating sites, examples of data structures that support collaboration, and guidelines for selecting appropriate synchronization and concurrency control schemes....

Positional control of space robot manipulator

Science.gov (United States)

Kurochkin, Vladislav; Shymanchuk, Dzmitry

2018-05-01

In this article the mathematical model of a planar space robot manipulator is under study. The space robot manipulator represents a solid body with attached manipulators. The system of equations of motion is determined using the Lagrange's equations. The control problem concerning moving the robot to a given point and return it to a given trajectory in the phase space is solved. Changes of generalized coordinates and necessary control actions are plotted for a specific model.

Why do spinal manipulation techniques take the form they do? Towards a general model of spinal manipulation.

Science.gov (United States)

Evans, David W

2010-06-01

For centuries, techniques used to manipulate joints in the spine have been passed down from one generation of manipulators to the next. Today, spinal manipulation is in the curious position that positive clinical effects have now been demonstrated, yet the theoretical base underpinning every aspect of its use is still underdeveloped. An important question is posed in this masterclass: why do spinal manipulation techniques take the form they do? From the available literature, two factors appear to provide an answer: 1. Action of a force upon vertebrae. Any 'direct' spinal manipulation technique requires that the patient be orientated in such a way that force is applied perpendicular to the overlying skin surface so as to act upon the vertebrae beneath. If the vertebral motion produced by 'directly' applied force is insufficient to produce the desired effect (e.g. cavitation), then force must be applied 'indirectly', often through remote body segments such as the head, thorax, abdomen, pelvis, and extremities. 2. Spinal segment morphology. A new hypothesis is presented. Spinal manipulation techniques exploit the morphology of vertebrae by inducing rotation at a spinal segment, about an axis that is always parallel to the articular surfaces of the constituent zygapophysial joints. In doing so, the articular surfaces of one zygapophysial joint appose to the point of contact, resulting in migration of the axis of rotation towards these contacting surfaces, and in turn this facilitates gapping of the other (target) zygapophysial joint. Other variations in the form of spinal manipulation techniques are likely to depend upon the personal style and individual choices of the practitioner.

Better with Byzantine: Manipulation-Optimal Mechanisms

Science.gov (United States)

Othman, Abraham; Sandholm, Tuomas

A mechanism is manipulable if it is in some agents’ best interest to misrepresent their private information. The revelation principle establishes that, roughly, anything that can be accomplished by a manipulable mechanism can also be accomplished with a truthful mechanism. Yet agents often fail to play their optimal manipulations due to computational limitations or various flavors of incompetence and cognitive biases. Thus, manipulable mechanisms in particular should anticipate byzantine play. We study manipulation-optimal mechanisms: mechanisms that are undominated by truthful mechanisms when agents act fully rationally, and do better than any truthful mechanism if any agent fails to act rationally in any way. This enables the mechanism designer to do better than the revelation principle would suggest, and obviates the need to predict byzantine agents’ irrational behavior. We prove a host of possibility and impossibility results for the concept which have the impression of broadly limiting possibility. These results are largely in line with the revelation principle, although the considerations are more subtle and the impossibility not universal.

Satyam’s Manipulative Accounting Methodology Unveiled: An Experience of an Asian Economy

Directory of Open Access Journals (Sweden)

MADAN LAL BHASIN

2017-01-01

Full Text Available Manipulative accounting practices are perennial and such practices have occurred in all eras, in all countries and affected millions of corporations. Unfortunately, there are few loopholes in accounting and auditing standards, which provide leeway and thus motivate accounting professionals to use aggressively manipulation practices. In fact, manipulative accounting (MA involves the intentional cooking-up of financial records towards a pre-determined target. Every company indeed maneuvers the numbers, to a certain extent, as formally reported in its financial statements (FS to achieve budgetary targets and generously reward senior managers. From Enron, WorldCom to Satyam, it appeared that window-dressing leading to MA is a serious problem that is increasing both in its frequency and severity, which undermines the integrity of financial reports and eroded investors’ confidence. The responsibility of preventing, detecting and investigating financial frauds rests squarely on Board of Directors and they should adopt preventive steps. Despite the raft of CG, and financial disclosure reforms, corporate accounting still remains murky and companies continue to find ways to play ‘hide-and-seek’ game with the system. Satyam computers were once the crown jewel of Indian IT-industry but were brought to the ground by its founders in 2009 as a result of financial manipulations in FS. The present study provides a snapshot of how Mr. Raju (CEO and Chairman mastermind this maze of AM practices? Undoubtedly, Satyam scam is illegal and unethical in which computers were cleverly used to manipulate account books by creating fake invoices, inflating revenues, falsifying the cash and bank balances, showing non-existent interest on fixed deposits, showing ghost employees, and so on. Satyam fraud has shattered the dreams of investors, shocked the government and regulators and led to questioning of the accounting practices of auditors and CG norms in India. Finally

The TFTR maintenance manipulator

International Nuclear Information System (INIS)

Kungl, D.; Loesser, D.; Heitzenroeder, P.; Cerdan, G.

1989-01-01

TFTR plans to begin D-T experiments in mid 1990. The D-T experimental program will produce approximately one hundred shots, with a neutron generation rate of 10 19 neutrons per shot. This will result in high levels of activation in TFTR, especially in the vacuum vessel. The primary purpose of the Maintenance Manipulator is to provide a means of remotely performing certain defined maintenance and inspection tasks inside the vacuum torus so as to minimize personnel exposure to radiation. The manipulator consists of a six-link folding boom connected to a fixed boom on a movable carriage. The entire manipulator is housed in a vacuum antechamber connected to the vacuum torus, through a port formerly used for a vacuum pumping duct. The configuration extends 180 0 in either direction to provide complete coverage of the torus. The four 3500 l/s turbopumps which were formerly used in the pumping duct will be mounted on the antechamber. The manipulator will utilize two end effectors. The first, called a General Inspection Arm (GIA) provides a movable platform to an inspection camera and an in-vacuum leak detector. The second is a bilateral, force-reflecting pair of slave arms which utilize specially developed tools to perform several maintenance functions. All components except the slave arms are capable of operating in TFTR's vacuum environment and during 150 0 C bakeout of the torus. (orig.)

MANIPULATING CONSUMERS THROUGH ADVERTISING

Directory of Open Access Journals (Sweden)

Nicoleta -Andreea Neacşu

2012-12-01

Full Text Available Marketing communication has evolved steadily in the direction of increasing complexity and increasing volume of funds needed to run their own actions. More than ever, consumers are exposed to an overwhelming variety of sources and communication tehniques, the information received being numerous, diverse and polyvalent. The desire to make more efficient the marketing communication activity urges the broadcasters to encode messages, to use effective means of propagation in order to obtain a high degree of control on receptors and to influence the consumption attitudes. Between the means used for this purpose, manipulation tehniques are well known. This paper highlights the main conclusions drawn as a result of a quantitative marketing research on the adult population from Braşov in order to identify the attitudes and opinions of consumers from Braşov regarding the manipulation techniques used by commercial practices and advertising.The results of the research have shown that 82% of the respondents buy products in promotional offers, and 18% choose not to buy these products and 61% of the respondents consider that they have not been manipulated not even once, while only 39% believe that they have been manipulated at least once through advertising or commercial practices. Advertisements on TV have a strong influence on consumers, 81% of the respondents considering that at least once they have bought a product because of a TV commercial.

Interaction control of a redundant mobile manipulator

International Nuclear Information System (INIS)

Chung, J.H.; Velinsky, S.A.; Hess, R.A.

1998-01-01

This paper discusses the modeling and control of a spatial mobile manipulator that consists of a robotic manipulator mounted on a wheeled mobile platform. The Lagrange-d'Alembert formulation is used to obtain a concise description of the dynamics of the system, which is subject to nonholonomic constraints. The complexity of the model is increased by introducing kinematic redundancy, which is created when a multilinked manipulator is used. The kinematic redundancy is resolved by decomposing the mobile manipulator into two subsystems: the mobile platform and the manipulator. The redundancy resolution scheme employs a nonlinear interaction-control algorithm, which is developed and applied to coordinate the two subsystems' controllers. The subsystem controllers are independently designed, based on each subsystem's dynamic characteristics. Simulation results show the promise of the developed algorithm

On stiffening cables of a long reach manipulator

International Nuclear Information System (INIS)

Wang, S.L.; Santiago, P.

1996-01-01

A long reach manipulator will be used for waste remediation in large underground storage tanks. The manipulator's slenderness makes it flexible and difficult to control. A low-cost and effective method to enhance the manipulator's stiffness is proposed in this research by using suspension cables. These cables can also be used to accurately measure the position of the manipulator's wrist

Manipulation Robustness of Collaborative Filtering

OpenAIRE

Benjamin Van Roy; Xiang Yan

2010-01-01

A collaborative filtering system recommends to users products that similar users like. Collaborative filtering systems influence purchase decisions and hence have become targets of manipulation by unscrupulous vendors. We demonstrate that nearest neighbors algorithms, which are widely used in commercial systems, are highly susceptible to manipulation and introduce new collaborative filtering algorithms that are relatively robust.

Can donated media placements reach intended audiences?

Science.gov (United States)

Cooper, Crystale Purvis; Gelb, Cynthia A; Chu, Jennifer; Polonec, Lindsey

2013-09-01

Donated media placements for public service announcements (PSAs) can be difficult to secure, and may not always reach intended audiences. Strategies used by the Centers for Disease Control and Prevention's (CDC) Screen for Life: National Colorectal Cancer Action Campaign (SFL) to obtain donated media placements include producing a diverse mix of high-quality PSAs, co-branding with state and tribal health agencies, securing celebrity involvement, monitoring media trends to identify new distribution opportunities, and strategically timing the release of PSAs. To investigate open-ended recall of PSAs promoting colorectal cancer screening, CDC conducted 12 focus groups in three U.S. cities with men and women either nearing age 50 years, when screening is recommended to begin, or aged 50-75 years who were not in compliance with screening guidelines. In most focus groups, multiple participants recalled exposure to PSAs promoting colorectal cancer screening, and most of these individuals reported having seen SFL PSAs on television, in transit stations, or on the sides of public buses. Some participants reported exposure to SFL PSAs without prompting from the moderator, as they explained how they learned about the disease. Several participants reported learning key campaign messages from PSAs, including that colorectal cancer screening should begin at age 50 years and screening can find polyps so they can be removed before becoming cancerous. Donated media placements can reach and educate mass audiences, including millions of U.S. adults who have not been screened appropriately for colorectal cancer.

Atomic and molecular manipulation

CERN Document Server

Mayne, Andrew J

2011-01-01

Work with individual atoms and molecules aims to demonstrate that miniaturized electronic, optical, magnetic, and mechanical devices can operate ultimately even at the level of a single atom or molecule. As such, atomic and molecular manipulation has played an emblematic role in the development of the field of nanoscience. New methods based on the use of the scanning tunnelling microscope (STM) have been developed to characterize and manipulate all the degrees of freedom of individual atoms and molecules with an unprecedented precision. In the meantime, new concepts have emerged to design molecules and substrates having specific optical, mechanical and electronic functions, thus opening the way to the fabrication of real nano-machines. Manipulation of individual atoms and molecules has also opened up completely new areas of research and knowledge, raising fundamental questions of "Optics at the atomic scale", "Mechanics at the atomic scale", Electronics at the atomic scale", "Quantum physics at the atomic sca...

Preparation, Single-Molecule Manipulation, and Energy Transfer Investigation of a Polyfluorene-graft-DNA polymer.

Science.gov (United States)

Madsen, Mikael; Christensen, Rasmus S; Krissanaprasit, Abhichart; Bakke, Mette R; Riber, Camilla F; Nielsen, Karina S; Zelikin, Alexander N; Gothelf, Kurt V

2017-08-04

Conjugated polymers have been intensively studied due to their unique optical and electronic properties combined with their physical flexibility and scalable bottom up synthesis. Although the bulk qualities of conjugated polymers have been extensively utilized in research and industry, the ability to handle and manipulate conjugated polymers at the nanoscale lacks significantly behind. Here, the toolbox for controlled manipulation of conjugated polymers was expanded through the synthesis of a polyfluorene-DNA graft-type polymer (poly(F-DNA)). The polymer possesses the characteristics associated with the conjugated polyfluorene backbone, but the protruding single-stranded DNA provides the material with an exceptional addressability. This study demonstrates controlled single-molecule patterning of poly(F-DNA), as well as energy transfer between two different polymer-DNA conjugates. Finally, highly efficient DNA-directed quenching of polyfluorene fluorescence was shown. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Dynamic whole-body robotic manipulation

Science.gov (United States)

Abe, Yeuhi; Stephens, Benjamin; Murphy, Michael P.; Rizzi, Alfred A.

2013-05-01

The creation of dynamic manipulation behaviors for high degree of freedom, mobile robots will allow them to accomplish increasingly difficult tasks in the field. We are investigating how the coordinated use of the body, legs, and integrated manipulator, on a mobile robot, can improve the strength, velocity, and workspace when handling heavy objects. We envision that such a capability would aid in a search and rescue scenario when clearing obstacles from a path or searching a rubble pile quickly. Manipulating heavy objects is especially challenging because the dynamic forces are high and a legged system must coordinate all its degrees of freedom to accomplish tasks while maintaining balance. To accomplish these types of manipulation tasks, we use trajectory optimization techniques to generate feasible open-loop behaviors for our 28 dof quadruped robot (BigDog) by planning trajectories in a 13 dimensional space. We apply the Covariance Matrix Adaptation (CMA) algorithm to solve for trajectories that optimize task performance while also obeying important constraints such as torque and velocity limits, kinematic limits, and center of pressure location. These open-loop behaviors are then used to generate desired feed-forward body forces and foot step locations, which enable tracking on the robot. Some hardware results for cinderblock throwing are demonstrated on the BigDog quadruped platform augmented with a human-arm-like manipulator. The results are analogous to how a human athlete maximizes distance in the discus event by performing a precise sequence of choreographed steps.

Kinematics and design of a class of parallel manipulators

Science.gov (United States)

Hertz, Roger Barry

1998-12-01

solutions. For special cases of the double tripod, the forward kinematics problem is shown to have a closed-form solution. Numerical examples are presented for the solution to the forward kinematics. A double tripod is presented that admits 16 unique and real forward kinematics solutions. Another example for a variable geometry truss is given that possesses 64 real solutions: 8 for each 16th order polynomial. The inverse kinematics problem is also discussed: given the relative position of the hand (end-effector), which is rigidly attached to one platform, solve for the independently controlled joint variables. Iterative solutions are proposed for both the variable-geometry truss and the double tripod. For special cases of both mechanisms, closed-form solutions are given. The practical problems of designing, building, and controlling a double-tripod manipulator are addressed. The resulting manipulator is a first-of-its kind prototype of a tapered (asymmetric) double-tripod manipulator. Real-time forward and inverse kinematics algorithms on an industrial robot controller is presented. The resulting performance of the prototype is impressive, since it was to achieve a maximum tool-tip speed of 4064 mm/s, maximum acceleration of 5 g, and a cycle time of 1.2 seconds for a typical pick-and-place pattern.

Data manipulation with R

CERN Document Server

Abedin, Jaynal

2014-01-01

This book is a step-by step, example-oriented tutorial that will show both intermediate and advanced users how data manipulation is facilitated smoothly using R.This book is aimed at intermediate to advanced level users of R who want to perform data manipulation with R, and those who want to clean and aggregate data effectively. Readers are expected to have at least an introductory knowledge of R and some basic administration work in R, such as installing packages and calling them when required.

Stock Market Manipulation on the Hong Kong Stock Exchange

Directory of Open Access Journals (Sweden)

Dionigi Gerace

2014-10-01

Full Text Available This study is the first to empirically examine stock market manipulation on the Hong Kong Stock Exchange. The dataset contains 40 cases of market manipulation from 1996 to 2009 that were successfully prosecuted by the Hong Kong Securities & Futures Commission. Manipulation is found to negatively impact market efficiency measures such as the bid-ask spread and volatility. Markets appear incapable of efficiently responding to the presence of manipulators and are characterised by information asymmetry. Manipulators were successfully able to raise prices and exit the market. This finding contradicts views that trade-based manipulation is entirely unprofitable and self-deterring. The victimisation of information-seeking investors and the market as a whole provides a strong rationale for all jurisdictions, including Australia, to have effective laws that prohibit manipulation and for robust enforcement of those laws to further deter market manipulation.

Managing collaboration in the nanoManipulator

DEFF Research Database (Denmark)

Hudson, Thomas C.; Helser, Aren T.; Sonnenwald, Diane H.

2004-01-01

We designed, developed, deployed, and evaluated the Collaborative nanoManipulator (CnM), a distributed, collaborative virtual environment system supporting remote scientific collaboration between users of the nanoManipulator interface to atomic force microscopes. This paper describes the entire...

Tension Stiffened and Tendon Actuated Manipulator

Science.gov (United States)

Doggett, William R. (Inventor); Dorsey, John T. (Inventor); Ganoe, George G. (Inventor); King, Bruce D. (Inventor); Jones, Thomas C. (Inventor); Mercer, Charles D. (Inventor); Corbin, Cole K. (Inventor)

2015-01-01

A tension stiffened and tendon actuated manipulator is provided performing robotic-like movements when acquiring a payload. The manipulator design can be adapted for use in-space, lunar or other planetary installations as it is readily configurable for acquiring and precisely manipulating a payload in both a zero-g environment and in an environment with a gravity field. The manipulator includes a plurality of link arms, a hinge connecting adjacent link arms together to allow the adjacent link arms to rotate relative to each other and a cable actuation and tensioning system provided between adjacent link arms. The cable actuation and tensioning system includes a spreader arm and a plurality of driven and non-driven elements attached to the link arms and the spreader arm. At least one cable is routed around the driven and non-driven elements for actuating the hinge.

Particle Manipulation Methods in Droplet Microfluidics.

Science.gov (United States)

Tenje, Maria; Fornell, Anna; Ohlin, Mathias; Nilsson, Johan

2018-02-06

This Feature describes the different particle manipulation techniques available in the droplet microfluidics toolbox to handle particles encapsulated inside droplets and to manipulate whole droplets. We address the advantages and disadvantages of the different techniques to guide new users.

Biotechnology: Challenge for the food industry

OpenAIRE

Popov Stevan

2007-01-01

According to the broadest definition, biotechnology is the use of living matter (plants, animals and microorganisms) in industry, environment protection, medicine and agriculture. Biotechnology takes a key position in the field of food processing during thousands of years. Last about fifty years brought dynamical development of knowledges in the natural sciences especially in domain of genetics and manipulation of genes. Biotechnology for which active role in the on-coming times could be fore...

ANALYSIS AND SIMULATION OF INDUSTRIAL manipulators K 180 by a software MATLAB

Directory of Open Access Journals (Sweden)

Slobodan Stefanović

2014-07-01

Full Text Available Robotics is a multidisciplinary branch of science that integrates knowledge from many areas of mechanics, electronics, computer science and automation. Due to the large application in practice often goes in some parts of medicine, art, economics. Further in the presentation we will experimentally demonstrate the application of MATLAB 2010 to create industrial robot KR 80 and movement simulations.

Manipulation or Mobilisation for Neck Pain

NARCIS (Netherlands)

Gross, Anita; Miller, Jordan; D'Sylva, Jonathan; Burnie, Stephen J.; Goldsmith, Charles H.; Graham, Nadine; Haines, Ted; Brønfort, Gert; Hoving, Jan L.

2010-01-01

Background Manipulation and mobilisation are often used, either alone or combined with other treatment approaches, to treat neck pain. Objectives To assess if manipulation or mobilisation improves pain, function/disability, patient satisfaction, quality of life, and global perceived effect in adults

Modeling of Continuum Manipulators Using Pythagorean Hodograph Curves.

Science.gov (United States)

Singh, Inderjeet; Amara, Yacine; Melingui, Achille; Mani Pathak, Pushparaj; Merzouki, Rochdi

2018-05-10

Research on continuum manipulators is increasingly developing in the context of bionic robotics because of their many advantages over conventional rigid manipulators. Due to their soft structure, they have inherent flexibility, which makes it a huge challenge to control them with high performances. Before elaborating a control strategy of such robots, it is essential to reconstruct first the behavior of the robot through development of an approximate behavioral model. This can be kinematic or dynamic depending on the conditions of operation of the robot itself. Kinematically, two types of modeling methods exist to describe the robot behavior; quantitative methods describe a model-based method, and qualitative methods describe a learning-based method. In kinematic modeling of continuum manipulator, the assumption of constant curvature is often considered to simplify the model formulation. In this work, a quantitative modeling method is proposed, based on the Pythagorean hodograph (PH) curves. The aim is to obtain a three-dimensional reconstruction of the shape of the continuum manipulator with variable curvature, allowing the calculation of its inverse kinematic model (IKM). It is noticed that the performances of the PH-based kinematic modeling of continuum manipulators are considerable regarding position accuracy, shape reconstruction, and time/cost of the model calculation, than other kinematic modeling methods, for two cases: free load manipulation and variable load manipulation. This modeling method is applied to the compact bionic handling assistant (CBHA) manipulator for validation. The results are compared with other IKMs developed in case of CBHA manipulator.

Agent Control for Reconfigurable Open Kinematic Chain Manipulators

Directory of Open Access Journals (Sweden)

Janez Sluga

2013-10-01

Full Text Available This paper presents a method for the autonomous control of differently structured open kinematic chains based on multi-agent system technology. The appropriate level of distributing local autonomy (agents to a manipulative structure is defined, which makes it possible to dynamically change the number, type and structure of manipulative components without modifying their behavioural logic. To achieve fast reconfigurable and scalable manipulative systems, a new multi-agent method is developed for controlling the manipulator kinematics. The new method enables independent manipulator structure from the control system because of its structural and system modularity. The proposed method consists of kinematic equations for use in an agent environment, agent motion-planning algorithms, evaluation functions, agent control logic and kinematic algorithms. The results of simulations and real-world experiments demonstrate the usefulness of the approach for different non-redundant and redundant manipulation structures.

A Molecular Analysis of Training Multiple versus Single Manipulations to Establish a Generalized Manipulative Imitation Repertoire

Science.gov (United States)

Hartley, Breanne K.

2009-01-01

This study evaluates the necessity of training multiple versus single manipulative-imitations per object in order to establish generalized manipulative-imitation. Training took place in Croyden Avenue School's Early Childhood Developmental Delay preschool classroom in Kalamazoo, MI. Two groups of 3 children each were trained to imitate in order to…

Evaluation of Remote Collaborative Manipulation for Scientific Data Analysis

OpenAIRE

Fleury , Cédric; Duval , Thierry; Gouranton , Valérie; Steed , Anthony

2012-01-01

International audience; In the context of scientific data analysis, we propose to compare a remote collaborative manipulation technique with a single user manipulation technique. The manipulation task consists in positioning a clipping plane in order to perform cross-sections of scientific data which show several points of interest located inside this data. For the remote collaborative manipulation, we have chosen to use the 3-hand manipulation technique proposed by Aguerreche et al. which is...

Reconfigurable mobile manipulation for accident response

International Nuclear Information System (INIS)

Anderson, Robert J.; Morse, William D.; Shirey, David L.; Cdebaca, DanielL M.; Hoffman, John P. Jr.; Lucy, William E.

2000-01-01

The need for a telerobotic vehicle with hazard sensing and integral manipulation capabilities has been identified for use in transportation accidents where nuclear weapons are involved. The Accident Response Mobile Manipulation System (ARMMS) platform has been developed to provide remote dexterous manipulation and hazard sensing for the Accident Response Group (ARG) at Sandia National Laboratories. The ARMMS' mobility platform is a military HMMWV [High Mobility Multipurpose Wheeled Vehicle] that is teleoperated over RF or Fiber Optic communication channels. ARMMS is equipped with two high strength Schilling Titan II manipulators and a suite of hazardous gas and radiation sensors. Recently, a modular telerobotic control architecture call SMART (Sandia Modular Architecture for Robotic and Teleoperation) has been applied to ARMMS. SMART enables input devices and many system behaviors to be rapidly configured in the field for specific mission needs. This paper summarizes current SMART developments applied to ARMMS

Inverse dynamic analysis of general n-link robot manipulators

International Nuclear Information System (INIS)

Yih, T.C.; Wang, T.Y.; Burks, B.L.; Babcock, S.M.

1996-01-01

In this paper, a generalized matrix approach is derived to analyze the dynamic forces and moments (torques) required by the joint actuators. This method is general enough to solve the problems of any n-link open-chain robot manipulators with joint combinations of R(revolute), P(prismatic), and S(spherical). On the other hand, the proposed matrix solution is applicable to both nonredundant and redundant robotic systems. The matrix notation is formulated based on the Newton-Euler equations under the condition of quasi-static equilibrium. The 4 x 4 homogeneous cylindrical coordinates-Bryant angles (C-B) notation is applied to model the robotic systems. Displacements, velocities, and accelerations of each joint and link center of gravity (CG) are calculated through kinematic analysis. The resultant external forces and moments exerted on the CG of each link are considered as known inputs. Subsequently, a 6n x 6n displacement coefficient matrix and a 6n x 1 external force/moment vector can be established. At last, the joint forces and moments needed for the joint actuators to control the robotic system are determined through matrix inversion. Numerical examples will be illustrated for the nonredundant industrial robots: Bendix AA/CNC (RRP/RRR) and Unimate 2000 spherical (SP/RRR) robots; and the redundant light duty utility arm (LDUA), modified LDUA, and tank waste retrieval manipulator system

Phenomena of Inter-age Manipulations in Interaction "Teacher-Student"

Directory of Open Access Journals (Sweden)

Miklyaeva A.V.,

2017-01-01

Full Text Available Thearticlepresentsthe results of studies of the phenomenon empirical inter-age manipulation in the pedagogical interaction. Inter-age manipulation is considered a form of manipulation carried out on the basis of an appeal to the participants in the interaction age roles. Based on the results of a survey 109 teenagers 13-15 years, using a questionnaire, color test of relations and projective drawing shows that inter-age manipulation is a common way to impact on the students, elected teacher. Teachers are the subjects of inter-age manipulation more often than students. It was revealed that the effectiveness of inter-age manipulation in pedagogical interaction increases if it is meaningful is consistent with the normative content of age roles, as well as «inter-age distance" between the teacher and the students. The greatest effectiveness of have inter-age manipulation undertaken for older teachers, and manipulation "from below" from young teachers

Maximum allowable load on wheeled mobile manipulators

International Nuclear Information System (INIS)

Habibnejad Korayem, M.; Ghariblu, H.

2003-01-01

This paper develops a computational technique for finding the maximum allowable load of mobile manipulator during a given trajectory. The maximum allowable loads which can be achieved by a mobile manipulator during a given trajectory are limited by the number of factors; probably the dynamic properties of mobile base and mounted manipulator, their actuator limitations and additional constraints applied to resolving the redundancy are the most important factors. To resolve extra D.O.F introduced by the base mobility, additional constraint functions are proposed directly in the task space of mobile manipulator. Finally, in two numerical examples involving a two-link planar manipulator mounted on a differentially driven mobile base, application of the method to determining maximum allowable load is verified. The simulation results demonstrates the maximum allowable load on a desired trajectory has not a unique value and directly depends on the additional constraint functions which applies to resolve the motion redundancy

Laser Diode Beam Basics, Manipulations and Characterizations

CERN Document Server

Sun, Haiyin

2012-01-01

Many optical design technical books are available for many years which mainly deal with image optics design based on geometric optics and using sequential raytracing technique. Some books slightly touched laser beam manipulation optics design. On the other hand many books on laser diodes have been published that extensively deal with laser diode physics with little touching on laser diode beam manipulations and characterizations. There are some internet resources dealing with laser diode beams. However, these internet resources have not covered enough materials with enough details on laser diode beam manipulations and characterizations. A technical book concentrated on laser diode beam manipulations and characterizations can fit in to the open and provide useful information to laser diode users. Laser Diode Beam Basics, Manipulations and  Characterizations is concentrated on the very practical side of the subject, it only discusses the basic physics and mathematics that are necessary for the readers in order...

Manipulatives Work!

Science.gov (United States)

Moch, Peggy L.

2001-01-01

Fifth graders (n=16) engaged in manipulative activities to improve their grasp of math concepts; one-third were identified as exceptional children. Posttest results after 12 lessons showed the overall class average increased from 49% to 59% and all areas improved compared to pretest scores. Attitude changes were also apparent. (Contains 24…

Seismic qualification of existing safety class manipulators

International Nuclear Information System (INIS)

Wu, Ting-shu; Moran, T.J.

1992-01-01

There are two bridge type electromechanical manipulators within a nuclear fuel handling facility which were constructed over twenty-five years ago. At that time, there were only minimal seismic considerations. These manipulators together with the facility are being reactivated. Detailed analyses have shown that the manipulators will satisfy the requirements of ANSI/AISC N690-1984 when they are subjected to loadings including the site specific design basis earthquake. 4 refs

Control of master-slave manipulator using virtual force

International Nuclear Information System (INIS)

Kosuge, Kazuhiro; Fukuda, Toshio; Itoh, Tomotaka; Sakamoto, Keizoh; Noma, Yasuo.

1994-01-01

We propose a control system for a master-slave manipulator system having a rate-controlled slave manipulator. In this system, the master manipulator is stiffness-controlled in the Cartesian coordinate system, and the slave manipulator is damping-controlled in the Cartesian coordinate system. The desired velocity of the slave arm is given by a displacement of the master arm from a nominal position. The operator feels virtual contact force from the environment because the contact force is proportional to the displacement when the slave arm motion is constrained by the environment. The proposed method is experimentally applied to manipulators with three degrees of freedom. The experimental results illustrate the validity of the proposed system. (author)

How to Make the Most of Math Manipulatives.

Science.gov (United States)

Burns, Marilyn

1996-01-01

A discussion of how to use math manipulatives to teach elementary students focuses on essential program elements: what math manipulatives are and why they are used, common questions about math manipulatives, how one teacher introduced the geoboard into the classroom, and pattern block activities. (SM)

Controlling Kuka Industrial Robots : Flexible Communication Interface JOpenShowVar.

OpenAIRE

Sanfilippo, Filippo; Hatledal, Lars Ivar; Zhang, Houxiang; Fago, Massimiliano; Pettersen, Kristin Ytterstad

2015-01-01

JOpenShowVar is a Java open-source cross-platform communication interface to Kuka industrial robots. This novel interface allows for read-write use of the controlled manipulator variables and data structures. JOpenShowVar, which is compatible with all the Kuka industrial robots that use KUKA Robot Controller version 4 (KR C4) and KUKA Robot Controller version 2 (KR C2), runs as a client on a remote computer connected with the Kuka controller via TCP/IP. Even though only soft real-time applica...

Advanced manipulator system for large hot cells

International Nuclear Information System (INIS)

Vertut, J.; Moreau, C.; Brossard, J.P.

1981-01-01

Large hot cells can be approached as extrapolated from smaller ones as wide, higher or longer in size with the same concept of using mechanical master slave manipulators and high density windows. This concept leads to a large number of working places and corresponding equipments, with a number of penetrations through the biological protection. When the large cell does not need a permanent operation of number of work places, as in particular to serve PIE machines and maintain the facility, use of servo manipulators with a large supporting unit and extensive use of television appears optimal. The advance on MA 23 and supports will be described including the extra facilities related to manipulators introduction and maintenance. The possibility to combine a powered manipulator and MA 23 (single or pair) on the same boom crane system will be described. An advance control system to bring the minimal dead time to control support movement, associated to the master slave arm operation is under development. The general television system includes over view cameras, associated with the limited number of windows, and manipulators camera. A special new system will be described which brings an automatic control of manipulator cameras and saves operator load and dead time. Full scale tests with MA 23 and support will be discussed. (author)

Digital Manipulation in Scientific Images: Some Ethical Considerations.

Science.gov (United States)

Hayden, James E.

2000-01-01

Discusses the importance of images in the publishing and presentation of scientific research. Explains the use of photographs as scientific data in research. Lists some reasons for the manipulation of images, and clarifies the acceptable and unacceptable limits of manipulation and image manipulation policy. (Author/YDS)

Analysis of a closed-kinematic chain robot manipulator

Science.gov (United States)

Nguyen, Charles C.; Pooran, Farhad J.

1988-01-01

Presented are the research results from the research grant entitled: Active Control of Robot Manipulators, sponsored by the Goddard Space Flight Center (NASA) under grant number NAG-780. This report considers a class of robot manipulators based on the closed-kinematic chain mechanism (CKCM). This type of robot manipulators mainly consists of two platforms, one is stationary and the other moving, and they are coupled together through a number of in-parallel actuators. Using spatial geometry and homogeneous transformation, a closed-form solution is derived for the inverse kinematic problem of the six-degree-of-freedom manipulator, built to study robotic assembly in space. Iterative Newton Raphson method is employed to solve the forward kinematic problem. Finally, the equations of motion of the above manipulators are obtained by employing the Lagrangian method. Study of the manipulator dynamics is performed using computer simulation whose results show that the robot actuating forces are strongly dependent on the mass and centroid locations of the robot links.

Manipulating stored phonological input during verbal working memory

Science.gov (United States)

Cogan, Gregory B.; Iyer, Asha; Melloni, Lucia; Thesen, Thomas; Friedman, Daniel; Doyle, Werner; Devinsky, Orrin; Pesaran, Bijan

2016-01-01

Verbal working memory (vWM), involves storing and manipulating information in phonological sensory input. An influential theory of vWM proposes that manipulation is carried out by a central executive while storage is performed by two interacting systems: A phonological input buffer that captures sound-based information and an articulatory rehearsal system that controls speech motor output. Whether, when, and how neural activity in the brain encodes these components remains unknown. Here, we read-out the contents of vWM from neural activity in human subjects as they manipulate stored speech sounds. As predicted, we identify storage systems that contain both phonological sensory and articulatory motor representations. Surprisingly however, we find that manipulation does not involve a single central executive but rather involves two systems with distinct contributions to successful manipulation. We propose, therefore, that multiple subsystems comprise the central executive needed to manipulate stored phonological input for articulatory motor output in vWM. PMID:27941789

MODULAR MANIPULATOR FOR ROBOTICS APPLICATIONS

International Nuclear Information System (INIS)

Geisinger, Joseph W. Ph.D.

2001-01-01

ARM Automation, Inc. is developing a FR-amework of modular actuators that can address the DOE's wide range of robotics needs. The objective of this effort is to demonstrate the effectiveness of this technology by constructing a manipulator FR-om these actuators within a glovebox for Automated Plutonium Processing (APP). At the end of the project, the system of actuators was used to construct several different manipulator configurations, which accommodate common glovebox tasks such as repackaging. The modular nature and quickconnects of this system simplify installation into ''hot'' boxes and any potential modifications or repair therein. This work focused on the development of self-contained robotic actuator modules including the embedded electronic controls for the purpose of building a manipulator system. Both of the actuators developed under this project contain the control electronics, sensors, motor, gear train, wiring, system communications and mechanical interfaces of a complete robotics servo device. Test actuators and accompanying DISC(trademark)s underwent validation testing at The University of Texas at Austin and ARM Automation, Inc. following final design and fabrication. The system also included custom links, an umbilical cord, an open architecture PC-based system controller, and operational software that permitted integration into a completely functional robotic manipulator system. The open architecture on which this system is based avoids proprietary interfaces and communication protocols which only serve to limit the capabilities and flexibility of automation equipment. The system was integrated and tested in the contractor's facility for intended performance and operations. The manipulator was tested using the full-scale equipment and process mock-ups. The project produced a practical and operational system including a quantitative evaluation of its performance and cost

Improvement of the M/S manipulator maintenance at OSL

International Nuclear Information System (INIS)

Kuwana, Koichi; Ouchi, Hiroshi; Ito, Yutaka; Sato, Yoshihiro; Midorikawa, Mituhiro; Hayakawa, Tuyoshi

2010-01-01

The safeguards inspection samples from the JNFL Rokkasho Reprocessing Plant (RRP) are received and analyzed at the On Site Laboratory (OSL). Since the samples from the input accountancy tank of the RRP contain a lot of fission products, they are treated in a hot-cell line with a M/S (Master /Slave) manipulator. Special equipment and tools were used for the maintenance of the M/S manipulator, especially for the exchange of the M/S manipulator. However, the manipulator exchange work was not easy due to the limitation of the space in the OSL. For solution to this problem, a monorail and monorail hoist equipment was installed onto wall surface of analytical room close to each M/S manipulator, and then it made the exchange of M/S manipulator easy without special equipment and tools. Additionally, operator was freed from the burden of working space arranging for the exchange of M/S manipulator such as removing of analytical equipments. This report represents the improvement of operation for the exchange of M/S manipulator with installation of monorail and hoist equipment. (author)

Theoretical Foundations of Appeals Used in Alcohol-Abuse and Drunk-Driving Public Service Announcements in the United States, 1995-2010.

Science.gov (United States)

Niederdeppe, Jeff; Avery, Rosemary J; Miller, Emily Elizabeth Namaste

2018-05-01

The study identifies the extent to which theoretical constructs drawn from well-established message effect communication theories are reflected in the content of alcohol-related public service announcements (PSAs) airing in the United States over a 16-year period. Content analysis of 18 530 141 alcohol-abuse (AA) and drunk-driving (DD) PSAs appearing on national network and local cable television stations in the 210 largest designated marketing areas (DMAs) from January 1995 through December 2010. The authors developed a detailed content analytic codebook and trained undergraduate coders to reliably identify the extent to which theoretical constructs and other creative ad elements are reflected in the PSAs. We show these patterns using basic descriptive statistics. Although both classes of alcohol-related PSAs used strategies that are consistent with major message effect theories, their specific theoretical orientations differed dramatically. The AA PSAs were generally consistent with constructs emphasized by the Extended Parallel Process Model (EPPM), whereas DD PSAs were more likely to use normative strategies emphasized by the Focus Theory of Narrative Conduct (FTNC) or source credibility appeals central to the Elaboration Likelihood Model. Having identified message content, future research should use deductive approaches to determine if volume and message content of alcohol-control PSAs have an impact on measures of alcohol consumption and/or measures of drunk driving, such as fatalities or driving while intoxicated/driving under the influence arrests.

Manipulations of Totalitarian Nazi Architecture

Science.gov (United States)

Antoszczyszyn, Marek

2017-10-01

The paper takes under considerations controversies surrounding German architecture designed during Nazi period between 1933-45. This architecture is commonly criticized for being out of innovation, taste & elementary sense of beauty. Moreover, it has been consequently wiped out from architectural manuals, probably for its undoubted associations with the totalitarian system considered as the most maleficent in the whole history. But in the meantime the architecture of another totalitarian system which appeared to be not less sinister than Nazi one is not stigmatized with such verve. It is Socrealism architecture, developed especially in East Europe & reportedly containing lots of similarities with Nazi architecture. Socrealism totalitarian architecture was never condemned like Nazi one, probably due to politically manipulated propaganda that influenced postwar public opinion. This observation leads to reflection that maybe in the same propaganda way some values of Nazi architecture are still consciously dissembled in order to hide the fact that some rules used by Nazi German architects have been also consciously used after the war. Those are especially manipulations that allegedly Nazi architecture consisted of. The paper provides some definitions around totalitarian manipulations as well as ideological assumptions for their implementation. Finally, the register of confirmed manipulations is provided with use of photo case study.

Manipulators inspired by the tongue of the chameleon.

Science.gov (United States)

Debray, Alexis

2011-06-01

Chameleons have developed a specialized ballistic tongue which elongates more than six times its rest length at speeds higher than 3.5 m s(-1) and accelerations 350 m s(-2), with a highly flexible mobile part, and which applies no continuous force during forward motion. These characteristics are possible because this tongue consists of two highly specialized systems, an ejection system for the forward motion and an accordion-like system for the retraction. Four manipulators inspired by the tongue of the chameleon and based on this design have been developed, resulting in three characteristics similar to the tongue of the chameleon: extensibility of the manipulator, flexibility of the mobile part, and absence of continuous force during the forward motion. The first manipulator mimics the basic mechanism of the tongue of the chameleon and reproduced its basic performances. A second manipulator performs a catching function at a speed of 3.5 m s(-1) with an acceleration of 573 m s(-2) while elongating seven times its rest length. The design of this manipulator is such that the dc motor used for retraction applies a torque 25 times its rated torque. Moreover, during the retraction, the mobile part of the manipulator moves due to its own inertia, allowing the dc motor to rotate at full velocity. In another manipulator, the addition of an elastomer in the mobile part allows for control of the retraction velocity. A model for these two manipulators compares well with the experimental data. Finally, the addition of wings on the mobile part allows us to take the advantage of aerodynamic effects, which is unusual for manipulators.

Manipulators inspired by the tongue of the chameleon

International Nuclear Information System (INIS)

Debray, Alexis

2011-01-01

Chameleons have developed a specialized ballistic tongue which elongates more than six times its rest length at speeds higher than 3.5 m s -1 and accelerations 350 m s -2 , with a highly flexible mobile part, and which applies no continuous force during forward motion. These characteristics are possible because this tongue consists of two highly specialized systems, an ejection system for the forward motion and an accordion-like system for the retraction. Four manipulators inspired by the tongue of the chameleon and based on this design have been developed, resulting in three characteristics similar to the tongue of the chameleon: extensibility of the manipulator, flexibility of the mobile part, and absence of continuous force during the forward motion. The first manipulator mimics the basic mechanism of the tongue of the chameleon and reproduced its basic performances. A second manipulator performs a catching function at a speed of 3.5 m s -1 with an acceleration of 573 m s -2 while elongating seven times its rest length. The design of this manipulator is such that the dc motor used for retraction applies a torque 25 times its rated torque. Moreover, during the retraction, the mobile part of the manipulator moves due to its own inertia, allowing the dc motor to rotate at full velocity. In another manipulator, the addition of an elastomer in the mobile part allows for control of the retraction velocity. A model for these two manipulators compares well with the experimental data. Finally, the addition of wings on the mobile part allows us to take the advantage of aerodynamic effects, which is unusual for manipulators.

Manipulators inspired by the tongue of the chameleon

Energy Technology Data Exchange (ETDEWEB)

Debray, Alexis, E-mail: debray.alexis@canon.co.jp [Canon Incorporation, 3-30-2, Shimomaruko, Ohta-ku, Tokyo 146-8501 (Japan)

2011-06-15

Chameleons have developed a specialized ballistic tongue which elongates more than six times its rest length at speeds higher than 3.5 m s{sup -1} and accelerations 350 m s{sup -2}, with a highly flexible mobile part, and which applies no continuous force during forward motion. These characteristics are possible because this tongue consists of two highly specialized systems, an ejection system for the forward motion and an accordion-like system for the retraction. Four manipulators inspired by the tongue of the chameleon and based on this design have been developed, resulting in three characteristics similar to the tongue of the chameleon: extensibility of the manipulator, flexibility of the mobile part, and absence of continuous force during the forward motion. The first manipulator mimics the basic mechanism of the tongue of the chameleon and reproduced its basic performances. A second manipulator performs a catching function at a speed of 3.5 m s{sup -1} with an acceleration of 573 m s{sup -2} while elongating seven times its rest length. The design of this manipulator is such that the dc motor used for retraction applies a torque 25 times its rated torque. Moreover, during the retraction, the mobile part of the manipulator moves due to its own inertia, allowing the dc motor to rotate at full velocity. In another manipulator, the addition of an elastomer in the mobile part allows for control of the retraction velocity. A model for these two manipulators compares well with the experimental data. Finally, the addition of wings on the mobile part allows us to take the advantage of aerodynamic effects, which is unusual for manipulators.

Can earnings manipulation create value?

OpenAIRE

Anton Miglo

2008-01-01

Existing literature usually considers earnings manipulation to be a negative social phenomenon. We argue that earnings manipulation can be a part of the equilibrium relationships between firm's insiders and outsiders. We consider an optimal contract between an entrepreneur and an investor where the entrepreneur is subject to a double moral hazard problem (one being the choice of production effort and the other being intertemporal substitution, which consists of transferring cash flows between...

A Geometry Deformation Model for Braided Continuum Manipulators

Directory of Open Access Journals (Sweden)

S. M. Hadi Sadati

2017-06-01

Full Text Available Continuum manipulators have gained significant attention in the robotic community due to their high dexterity, deformability, and reachability. Modeling of such manipulators has been shown to be very complex and challenging. Despite many research attempts, a general and comprehensive modeling method is yet to be established. In this paper, for the first time, we introduce the bending effect in the model of a braided extensile pneumatic actuator with both stiff and bendable threads. Then, the effect of the manipulator cross-section deformation on the constant curvature and variable curvature models is investigated using simple analytical results from a novel geometry deformation method and is compared to experimental results. We achieve 38% mean reference error simulation accuracy using our constant curvature model for a braided continuum manipulator in presence of body load and 10% using our variable curvature model in presence of extensive external loads. With proper model assumptions and taking to account the cross-section deformation, a 7–13% increase in the simulation mean error accuracy is achieved compared to a fixed cross-section model. The presented models can be used for the exact modeling and design optimization of compound continuum manipulators by providing an analytical tool for the sensitivity analysis of the manipulator performance. Our main aim is the application in minimal invasive manipulation with limited workspaces and manipulators with regional tunable stiffness in their cross section.

The application of manipulator robot for nuclear plant maintenance

International Nuclear Information System (INIS)

Kohata, Yukifumi; Fujita, Jun; Onishi, Ken; Tsuhari, Hiroyuki; Hosoe, Fumihiro

2010-01-01

In the maintenance works at nuclear power plant, robots are used because of high radiation, narrow space and underwater work. Various robots are needed because there is various maintenance works. This is inefficiency. As the solutions, we developed manipulator robots for the access of specialized tools. This study shows manipulator robots developed by MHI, application example to maintenance works and effectiveness of manipulator robots. When robotization of maintenance works are considered, manipulator technology is very effective solution means. We achieved efficiency improvement and the reliability improvement by developing a high generality manipulator. (author)

Physics Based Vision Systems for Robotic Manipulation

Data.gov (United States)

National Aeronautics and Space Administration — With the increase of robotic manipulation tasks (TA4.3), specifically dexterous manipulation tasks (TA4.3.2), more advanced computer vision algorithms will be...

Distinguishing manipulated stocks via trading network analysis

Science.gov (United States)

Sun, Xiao-Qian; Cheng, Xue-Qi; Shen, Hua-Wei; Wang, Zhao-Yang

2011-10-01

Manipulation is an important issue for both developed and emerging stock markets. For the study of manipulation, it is critical to analyze investor behavior in the stock market. In this paper, an analysis of the full transaction records of over a hundred stocks in a one-year period is conducted. For each stock, a trading network is constructed to characterize the relations among its investors. In trading networks, nodes represent investors and a directed link connects a stock seller to a buyer with the total trade size as the weight of the link, and the node strength is the sum of all edge weights of a node. For all these trading networks, we find that the node degree and node strength both have tails following a power-law distribution. Compared with non-manipulated stocks, manipulated stocks have a high lower bound of the power-law tail, a high average degree of the trading network and a low correlation between the price return and the seller-buyer ratio. These findings may help us to detect manipulated stocks.

System Integration for Real-Time Mobile Manipulation

Directory of Open Access Journals (Sweden)

Reza Oftadeh

2014-03-01

Full Text Available Mobile manipulators are one of the most complicated types of mechatronics systems. The performance of these robots in performing complex manipulation tasks is highly correlated with the synchronization and integration of their low-level components. This paper discusses in detail the mechatronics design of a four wheel steered mobile manipulator. It presents the manipulator's mechanical structure and electrical interfaces, designs low-level software architecture based on embedded PC-based controls, and proposes a systematic solution based on code generation products of MATLAB and Simulink. The remote development environment described here is used to develop real-time controller software and modules for the mobile manipulator under a POSIX-compliant, real-time Linux operating system. Our approach enables developers to reliably design controller modules that meet the hard real-time constraints of the entire low-level system architecture. Moreover, it provides a systematic framework for the development and integration of hardware devices with various communication mediums and protocols, which facilitates the development and integration process of the software controller.

Development of a maintenance manipulator for TFTR

International Nuclear Information System (INIS)

Holloway, C.

1986-01-01

The maintenance manipulator is a device permanently connected to the Tokamak Fusion Test Reactor (TFTR) vacuum vessel and is located in close proximity to the tokamak. It is used for the inspection and maintenance of in-vessel components whilst the machine remains under vacuum. The total system comprises a vacuum vessel ante-chamber that houses the manipulator, an articulated boom and carriage that transports and positions a dexterous end-effector, and end-effector that supports maintenance tooling, and an inspection system. Because of the maintenance manipulator's operating environment, there are many challenging engineering features, i.e., temperatures up to 150 0 C, changing magnetic fields in space and time that act on the manipulator whilst it is at rest, neutron neutron fluxes of up to 10/sup 11/cm/sup -2/s/sup -1/, and, last but not least, UHV conditions. This paper describes the development of the vacuum system, the maintenance manipulator, and inspective devices. It includes the methods employed to overcome the engineering difficulties and the application of information gained from other advanced technology programs, such as space and nuclear fission

Guide to improving the performance of a manipulator system for nuclear fuel handling through computer controls. Final report

International Nuclear Information System (INIS)

Evans, J.M. Jr.; Albus, J.S.; Barbera, A.J.; Rosenthal, R.; Truitt, W.B.

1975-11-01

The Office of Developmental Automation and Control Technology of the Institute for Computer Sciences and Technology of the National Bureau of Standards provides advising services, standards and guidelines on interface and computer control systems, and performance specifications for the procurement and use of computer controlled manipulators and other computer based automation systems. These outputs help other agencies and industry apply this technology to increase productivity and improve work quality by removing men from hazardous environments. In FY 74 personnel from the Oak Ridge National Laboratory visited NBS to discuss the feasibility of using computer control techniques to improve the operation of remote control manipulators in nuclear fuel reprocessing. Subsequent discussions led to an agreement for NBS to develop a conceptual design for such a computer control system for the PaR Model 3000 manipulator in the Thorium Uranium Recycle Facility (TURF) at ORNL. This report provides the required analysis and conceptual design. Complete computer programs are included for testing of computer interfaces and for actual robot control in both point-to-point and continuous path modes

Path planning of master-slave manipulator using graphic simulator

International Nuclear Information System (INIS)

Lee, J. Y.; Kim, S. H.; Song, T. K.; Park, B. S.; Yoon, J. S.

2002-01-01

To handle the high level radioactive materials such as spent fuels remotely, the master-slave manipulator is generally used as a remote handling equipment in the hot cell. To analyze the motion and to implement the training system by virtual reality technology, the simulator for M-S manipulator using the computer graphics is developed. The parts are modelled in 3-D graphics, assembled, and kinematics are assigned. The inverse kinematics of the manipulator is defined, and the slave of manipulator is coupled with master by the manipulator's specification. Also, the virtual work cell is implemented in the graphical environment which is the same as the real environment and the path planning method using the function of the collision detection for a manipulator are proposed. This graphic simulator of manipulator can be effectively used in designing of the maintenance processes for the hot cell equipment and enhance the reliability of the spent fuel management

Pose Space Surface Manipulation

Directory of Open Access Journals (Sweden)

Yusuke Yoshiyasu

2012-01-01

Full Text Available Example-based mesh deformation techniques produce natural and realistic shapes by learning the space of deformations from examples. However, skeleton-based methods cannot manipulate a global mesh structure naturally, whereas the mesh-based approaches based on a translational control do not allow the user to edit a local mesh structure intuitively. This paper presents an example-driven mesh editing framework that achieves both global and local pose manipulations. The proposed system is built with a surface deformation method based on a two-step linear optimization technique and achieves direct manipulations of a model surface using translational and rotational controls. With the translational control, the user can create a model in natural poses easily. The rotational control can adjust the local pose intuitively by bending and twisting. We encode example deformations with a rotation-invariant mesh representation which handles large rotations in examples. To incorporate example deformations, we infer a pose from the handle translations/rotations and perform pose space interpolation, thereby avoiding involved nonlinear optimization. With the two-step linear approach combined with the proposed multiresolution deformation method, we can edit models at interactive rates without losing important deformation effects such as muscle bulging.

Development of an optimum end-effector with a nano-scale uneven surface for non-adhesion cell manipulation using a micro-manipulator

International Nuclear Information System (INIS)

Horade, M; Kojima, M; Kamiyama, K; Kurata, T; Mae, Y; Arai, T

2015-01-01

In order to realize effective micro-manipulation using a micro-manipulator system, an optimum end-effector is proposed. Cell-manipulation experiments using mouse fibroblast cells are conducted, and the usability of the proposed end-effector is confirmed. A key advantage of the micro-manipulator is high-accuracy, high-speed 3D micro- and nano-scale positioning. Micro-manipulation has often been used in research involving biological cells. However, there are two important concerns with the micro-manipulator system: gripping efficiency and the release of gripped objects. When it is not possible to grip a micro-object, such as a cell, near its center, the object may be dropped during manipulation. Since the acquisition of exact position information for a micro-object in the vertical direction is difficult using a microscope, the gripping efficiency of the end-effector should be improved. Therefore, technical skill or operational support is required. Since, on the micro-scale, surface forces such as the adsorption force are greater than body forces, such as the gravitational force, the adhesion force between the end-effector and the object is strong. Therefore, manipulation techniques without adhesion are required for placed an object at an arbitrary position. In the present study, we consider direct physical contact between the end-effector and objects. First, the design and materials of the end-effector for micro-scale manipulation were optimized, and an end-effector with an optimum shape to increase the grip force was fabricated. Second, the surface of the end-effector tip was made uneven, and the adhesion force from increasing on the micro-scale was prevented. When an end-effector with an uneven surface was used, release without adhesion was successful 85.0% of the time. On the other hand, when an end-effector without an uneven surface was used, release without adhesion was successful 6.25% of the time. Therefore, the superiority of a structure with an uneven

MODULAR MANIPULATOR FOR ROBOTICS APPLICATIONS

Energy Technology Data Exchange (ETDEWEB)

Joseph W. Geisinger, Ph.D.

2001-07-31

ARM Automation, Inc. is developing a framework of modular actuators that can address the DOE's wide range of robotics needs. The objective of this effort is to demonstrate the effectiveness of this technology by constructing a manipulator from these actuators within a glovebox for Automated Plutonium Processing (APP). At the end of the project, the system of actuators was used to construct several different manipulator configurations, which accommodate common glovebox tasks such as repackaging. The modular nature and quickconnects of this system simplify installation into ''hot'' boxes and any potential modifications or repair therein. This work focused on the development of self-contained robotic actuator modules including the embedded electronic controls for the purpose of building a manipulator system. Both of the actuators developed under this project contain the control electronics, sensors, motor, gear train, wiring, system communications and mechanical interfaces of a complete robotics servo device. Test actuators and accompanying DISC{trademark}s underwent validation testing at The University of Texas at Austin and ARM Automation, Inc. following final design and fabrication. The system also included custom links, an umbilical cord, an open architecture PC-based system controller, and operational software that permitted integration into a completely functional robotic manipulator system. The open architecture on which this system is based avoids proprietary interfaces and communication protocols which only serve to limit the capabilities and flexibility of automation equipment. The system was integrated and tested in the contractor's facility for intended performance and operations. The manipulator was tested using the full-scale equipment and process mock-ups. The project produced a practical and operational system including a quantitative evaluation of its performance and cost.

Judging Nudging : Answering the Manipulation Objection

NARCIS (Netherlands)

Nys, Thomas; Engelen, Bart

2017-01-01

Is it ever justified to ‘nudge’ people towards their own health? In this article, we argue that it is. We do so by arguing (1) that nudges are not necessarily – as is commonly thought – manipulative; (2) that even those nudges that are manipulative can be justified, for instance, when they preserve

Assessment and prevention of the professional risks in the operations of industrial radiography

International Nuclear Information System (INIS)

Pizzorno, M.; Paul, D.; Coletti, F.; Sari Minodier, I.; Azzopardi, G.; Klemenic, O.; Botta, A.

2006-01-01

Industrial radiography is a nocturnal activity, hazardous and little known; it is among the professions the most exposed to ionizing radiation. This study analyse the doses, received the industrial radiographers, their workplace conditions and organization of their tasks. Dosimetry observations on site, together with calculations using the Mercurad code, allowed mean values for reference doses for all the work (including transport, gammatron manipulation, collimator manipulation, shooting) to be established. These value were integrated into a table entitled 'reference doses' in order to provisionally evaluate the doses received by the operators. Distances for security zone demarcation, so as to forbid access to non exposed personnel during shooting, were evaluated. Assessment of the professional risks for industrial radiography, taking into account all the risks (radiological and others), has been made and is under evaluation. This led to measures for prevention based on the material used (collimator, tripod, gamma-stops), on the organization and the conditions of work (for example, time limits permitting a prior visit to the site and preparation for radiography, suitable scaffolding, sufficient lighting, siting of shootings). These prevention measure will be integrated into the new charter of good practice in industrial radiography in the Provence Alpes Cote d'Azur region (south of France). (authors)

Surgical manipulation of mammalian embryos in vitro.

Science.gov (United States)

Naruse, I; Keino, H; Taniguchi, M

1997-04-01

Whole-embryo culture systems are useful in the fields of not only embryology but also teratology, toxicology, pharmacology, and physiology. Of the many advantages of whole-embryo culture, we focus here on the surgical manipulation of mammalian embryos. Whole-embryo culture allows us to manipulate mammalian embryos, similarly to fish, amphibian and avian embryos. Many surgical experiments have been performed in mammalian embryos in vitro. Such surgical manipulation alters the destiny of morphogenesis of the embryos and can answer many questions concerning developmental issues. As an example of surgical manipulation using whole-embryo culture systems, one of our experiments is described. Microsurgical electrocauterization of the deep preaxial mesodermal programmed cell death zone (fpp) in the footplate prevented the manifestation of polydactyly in genetic polydactyly mouse embryos (Pdn/Pdn), in which fpp was abolished.

Automatic camera tracking for remote manipulators

International Nuclear Information System (INIS)

Stoughton, R.S.; Martin, H.L.; Bentz, R.R.

1984-07-01

The problem of automatic camera tracking of mobile objects is addressed with specific reference to remote manipulators and using either fixed or mobile cameras. The technique uses a kinematic approach employing 4 x 4 coordinate transformation matrices to solve for the needed camera PAN and TILT angles. No vision feedback systems are used, as the required input data are obtained entirely from position sensors from the manipulator and the camera-positioning system. All hardware requirements are generally satisfied by currently available remote manipulator systems with a supervisory computer. The system discussed here implements linear plus on/off (bang-bang) closed-loop control with a +-2-deg deadband. The deadband area is desirable to avoid operator seasickness caused by continuous camera movement. Programming considerations for camera control, including operator interface options, are discussed. The example problem presented is based on an actual implementation using a PDP 11/34 computer, a TeleOperator Systems SM-229 manipulator, and an Oak Ridge National Laboratory (ORNL) camera-positioning system. 3 references, 6 figures, 2 tables

Automatic camera tracking for remote manipulators

International Nuclear Information System (INIS)

Stoughton, R.S.; Martin, H.L.; Bentz, R.R.

1984-04-01

The problem of automatic camera tracking of mobile objects is addressed with specific reference to remote manipulators and using either fixed or mobile cameras. The technique uses a kinematic approach employing 4 x 4 coordinate transformation matrices to solve for the needed camera PAN and TILT angles. No vision feedback systems are used, as the required input data are obtained entirely from position sensors from the manipulator and the camera-positioning system. All hardware requirements are generally satisfied by currently available remote manipulator systems with a supervisory computer. The system discussed here implements linear plus on/off (bang-bang) closed-loop control with a +-2 0 deadband. The deadband area is desirable to avoid operator seasickness caused by continuous camera movement. Programming considerations for camera control, including operator interface options, are discussed. The example problem presented is based on an actual implementation using a PDP 11/34 computer, a TeleOperator Systems SM-229 manipulator, and an Oak Ridge National Laboratory (ORNL) camera-positioning system. 3 references, 6 figures, 2 tables

A systematic review of the use of dosage form manipulation to obtain required doses to inform use of manipulation in paediatric practice.

Science.gov (United States)

Richey, Roberta H; Hughes, Clare; Craig, Jean V; Shah, Utpal U; Ford, James L; Barker, Catrin E; Peak, Matthew; Nunn, Anthony J; Turner, Mark A

2017-02-25

This study sought to determine whether there is an evidence base for drug manipulation to obtain the required dose, a common feature of paediatric clinical practice. A systematic review of the data sources, PubMed, EMBASE, CINAHL, IPA and the Cochrane database of systematic reviews, was used. Studies that considered the dose accuracy of manipulated medicines of any dosage form, evidence of safety or harm, bioavailability, patient experience, tolerability, contamination and comparison of methods of manipulation were included. Case studies and letters were excluded. Fifty studies were eligible for inclusion, 49 of which involved tablets being cut, split, crushed or dispersed. The remaining one study involved the manipulation of suppositories of one drug. No eligible studies concerning manipulation of oral capsules or liquids, rectal enemas, nebuliser solutions, injections or transdermal patches were identified. Twenty four of the tablet studies considered dose accuracy using weight and/or drug content. In studies that considered weight using adapted pharmacopoeial specifications, the percentage of halved tablets meeting these specifications ranged from 30% to 100%. Eighteen studies investigated bioavailability, pharmacokinetics or clinical outcomes following manipulations which included nine delayed or modified release formulations. In each of these nine studies the entirety of the dosage form was administered. Only one of the 18 studies was identified where drugs were manipulated to obtain a proportion of the dosage form, and that proportion administered. The five studies that considered patient perception found that having to manipulate the tablets did not have a negative impact on adherence. Of the 49 studies only two studies reported investigating children. This review yielded limited evidence to support manipulation of medicines for children. The results cannot be extrapolated between dosage forms, methods of manipulation or between different brands of the same

Manipulators in deep ocean environments, needs versus technology

International Nuclear Information System (INIS)

Mackey, L.A.; Stenovec, G.M.

1984-01-01

As exploration and production proceed into deeper water, remotely operated vehicles (ROVs) and their manipulators acquire many of the tasks now performed by divers in shallower water. The resulting increased complexity of work tasks requires more dexterious manipulators. Even the most sophisticated of the manipulators today cannot perform many of the work tasks now performed by divers in shallower waters. Manipulators cannot yet duplicate the functions of the human hand. How much technology must be improved to perform the desired tasks, and how much adapting of the work task or equipment must be done to achieve a workable underwater robotics environment?

Interpersonal relationship manipulation at a personal level

OpenAIRE

Andreja Hribernik

2010-01-01

Manipulation is not unknown or strange to any of us. We have all experienced it, or perhaps even practiced it. It is wrong not to recognize it, to find excuses for it, and, above all, it is wrong not to decide to change one’s behaviour. Long-lasting use of manipulation leaves consequences on all the parties involved: the victim, the observer and the perpetrator. Manipulation is a relation between persons which does not consider the needs of everybody involved. It means exploitation and mislea...

W-026, acceptance test report manipulator system

International Nuclear Information System (INIS)

Watson, T.L.

1997-01-01

The purpose of the WRAP Manipulator System Acceptance Test Plan (ATP) is to verify that the 4 glovebox sets of WRAP manipulator components, including rail/carriage, slave arm, master controller and auxiliary equipment, meets the requirements of the functional segments of 14590 specification. The demonstration of performance elements of the ATP are performed as a part of the Assembly specifications. Manipulator integration is integrated in the performance testing of the gloveboxes. Each requirement of the Assembly specification will be carried out in conjunction with glovebox performance tests

Technical safety ingas supply - prevention of manipulations; Technische Sicherheit in der Gasversorgung - Manipulationsabwehr

Energy Technology Data Exchange (ETDEWEB)

Guther, F. [Ingenieurbuero Guther, Hausham (Germany)

2000-07-01

Most accidents in gas supply are gas explosions wilfully caused for the purpose of suicide, killing, stealing gas, or causing damage to property. The gas industry attempts to minimize these manipulations by means of practicable technical, organisational and communicative measures. [German] Die vorsaetzliche Herbeifuehrung von Gasexplosionen mit der Absicht der Selbsttoetung, der Toetung Dritter, des Gasdiebstahls oder der Sachbeschaedigung stellt die schwerwiegendste Unfallursache in der oeffentlichen Gasversorgung dar. Dem Gasfach kommt damit noch staerker als bisher die Aufgabenstellung zu, mit praktikablen technischen und eventuell organisatorischen wie auch kommunikativen Moeglichkeiten diese Manipulationsfaelle auf ein Mindestmass zu reduzieren. (orig.)

An Introduction to the Development of a Product Brand: An Evidence-Based Template for Use with First Year Undergraduate Industrial Designers

Science.gov (United States)

Torrens, George Edward; Badni, Kevin; Hurn, Karl; Storer, Ian James

2015-01-01

The manipulation of colour, form and texture within a commercial design activity is a core competency for an industrial designer. The job of the Industrial designer is to use colour, form, texture, temperature and movement to deliver a sensory experience that evokes a desired response. The core deliverables of an industrial designer are embedded…

ADVERTISING AS MEAN OF MANIPULATION OF PEOPLE

Directory of Open Access Journals (Sweden)

Camelia PAVEL

2014-04-01

Full Text Available The article provides a number of issues involved in defining manipulation, because both in the current language as in the specialty literature, the manipulation notion is used with multiple significations, often contradictory ones, and that it’s not firmly delimited by other notions from the same sphere, like persuasion or propaganda. The aim of the article will be, in the end, removing ambiguity that surrounds this concept and offering a better understanding of its very real effects on human lives. We advance and sustain the hypothesis that manipulation is an illegitimate process, justified by the structure of the human conscience and by the mechanisms of the social life. In addition, the paper provides a concrete example of manipulation of public through advertising contracts offered by Roşia Montană Gold Corporation. Finally conclusions were outlined.

Global Energy-Optimal Redundancy Resolution of Hydraulic Manipulators: Experimental Results for a Forestry Manipulator

Directory of Open Access Journals (Sweden)

Jarmo Nurmi

2017-05-01

Full Text Available This paper addresses the energy-inefficiency problem of four-degrees-of-freedom (4-DOF hydraulic manipulators through redundancy resolution in robotic closed-loop controlled applications. Because conventional methods typically are local and have poor performance for resolving redundancy with respect to minimum hydraulic energy consumption, global energy-optimal redundancy resolution is proposed at the valve-controlled actuator and hydraulic power system interaction level. The energy consumption of the widely popular valve-controlled load-sensing (LS and constant-pressure (CP systems is effectively minimised through cost functions formulated in a discrete-time dynamic programming (DP approach with minimum state representation. A prescribed end-effector path and important actuator constraints at the position, velocity and acceleration levels are also satisfied in the solution. Extensive field experiments performed on a forestry hydraulic manipulator demonstrate the performance of the proposed solution. Approximately 15–30% greater hydraulic energy consumption was observed with the conventional methods in the LS and CP systems. These results encourage energy-optimal redundancy resolution in future robotic applications of hydraulic manipulators.

MA-23-6000: underwater bilateral servo master slave manipulator

International Nuclear Information System (INIS)

Vertut, Jean

The different types of manipulators, recent data on their dexterity and the underwater work possible with servo master slave manipulators are reviewed. The general specifications of the manipulator MA 23-6000 designed for the machine ERIC II are given [fr

Advanced Bimanual Manipulation Results from the DEXMART Project

CERN Document Server

2012-01-01

Dexterous and autonomous manipulation is a key technology for the personal and service robots of the future. Advances in Bimanual Manipulation edited by Bruno Siciliano provides the robotics community with the most noticeable results of the four-year European project DEXMART (DEXterous and autonomous dual-arm hand robotic manipulation with sMART sensory-motor skills: A bridge from natural to artificial cognition). The volume covers a host of highly important topics in the field, concerned with modelling and learning of human manipulation skills, algorithms for task planning, human-robot interaction, and grasping, as well as hardware design of dexterous anthropomorphic hands. The results described in this five-chapter collection are believed to pave the way towards the development of robotic systems endowed with dexterous and human-aware dual-arm/hand manipulation skills for objects, operating with a high degree of autonomy in unstructured real-world environments.

Genetic manipulation of amylotic yeast for degradation of starch

International Nuclear Information System (INIS)

Nasim, A.

1991-01-01

The availability of a variety of techniques in Genetic Engineering has greatly facilitated the manipulation of hereditary material. These methodologies provide effective tools to utilize the existing microorganisms for creating novel combinations of hybrid strains for the degradation of substrates that can be converted into alcohol. Yeasts have several distinct advantages including the long standing industrial experience of scaling up the growth. The present report deals with the account of some experimental approaches used to obtained amylolytic yeast strains with ability to degrade starch. From among the naturally occurring yeasts schwanniomyces was found to be very efficient for this purpose. Both gene cloning and protoplast fusion were used to transfer DNA from Saccharomyces diastaticus to the bakers yeast Saccharomyces cerevisiae. The glucoamylase gene of S. diastaticus has been successfully cloned into S. cerevisiae. The observations are discussed as there relate to the current efforts to degrade substrates for energy placing special emphasis on the tremendous potential that naturally occurring microbes may have. This emphasizes the need to examine this aspect critically before initiating attempts to genetically engineer microbes for heterologous gene transfer, which appears to have serious limitations as far as the production of the end products adequate for industrial purposes are concerned. (author)

Analysis of singularity in redundant manipulators

International Nuclear Information System (INIS)

Watanabe, Koichi

2000-03-01

In the analysis of arm positions and configurations of redundant manipulators, the singularity avoidance problems are important themes. This report presents singularity avoidance computations of a 7 DOF manipulator by using a computer code based on human-arm models. The behavior of the arm escaping from the singular point can be identified satisfactorily through the use of 3-D plotting tools. (author)

Optical Manipulation System Using a Plurality of Optical Traps

DEFF Research Database (Denmark)

2006-01-01

The present invention relates to an optical manipulation system (10) for generation of a plurality of optical traps for manipulation of micro-objects including nano-objects using electromagnetic radiation forces in a micro-object manipulation volume (14), the system comprising a spatially modulat...

Vehicle-manipulator systems modeling for simulation, analysis, and control

CERN Document Server

From, Pal Johan; Pettersen, Kristin Ytterstad

2014-01-01

Furthering the aim of reducing human exposure to hazardous environments, this monograph presents a detailed study of the modeling and control of vehicle-manipulator systems. The text shows how complex interactions can be performed at remote locations using systems that combine the manipulability of robotic manipulators with the ability of mobile robots to locomote over large areas.  The first part studies the kinematics and dynamics of rigid bodies and standard robotic manipulators and can be used as an introduction to robotics focussing on robust mathematical modeling. The monograph then moves on to study vehicle-manipulator systems in great detail with emphasis on combining two different configuration spaces in a mathematically sound way. Robustness of these systems is extremely important and Modeling and Control of Vehicle-manipulator Systems effectively represents the dynamic equations using a mathematically robust framework. Several tools from Lie theory and differential geometry are used to obtain glob...

Reduced prefrontal and temporal processing and recall of high "sensation value" ads.

Science.gov (United States)

Langleben, Daniel D; Loughead, James W; Ruparel, Kosha; Hakun, Jonathan G; Busch-Winokur, Samantha; Holloway, Matthew B; Strasser, Andrew A; Cappella, Joseph N; Lerman, Caryn

2009-05-15

Public service announcements (PSAs) are non-commercial broadcast ads that are an important part of televised public health campaigns. "Message sensation value" (MSV), a measure of sensory intensity of audio, visual, and content features of an ad, is an important factor in PSA impact. Some communication theories propose that higher message sensation value brings increased attention and cognitive processing, leading to higher ad impact. Others argue that the attention-intensive format could compete with ad's message for cognitive resources and result in reduced processing of PSA content and reduced overall effectiveness. Brain imaging during PSA viewing provides a quantitative surrogate measure of PSA impact and addresses questions of PSA evaluation and design not accessible with traditional subjective and epidemiological methods. We used Blood Oxygenation Level Dependent (BOLD) functional Magnetic Resonance Imaging (fMRI) and recognition memory measures to compare high and low MSV anti-tobacco PSAs and neutral videos. In a short-delay, forced-choice memory test, frames extracted from PSAs were recognized more accurately than frames extracted from the NV. Frames from the low MSV PSAs were better recognized than frames from the high MSV PSAs. The accuracy of recognition of PSA frames was positively correlated with the prefrontal and temporal, and negatively correlated with the occipital cortex activation. The low MSV PSAs were associated with greater prefrontal and temporal activation, than the high MSV PSAs. The high MSV PSAs produced greater activation primarily in the occipital cortex. These findings support the "dual processing" and "limited capacity" theories of communication that postulate a competition between ad's content and format for the viewers' cognitive resources and suggest that the "attention-grabbing" high MSV format could impede the learning and retention of an ad. These findings demonstrate the potential of using neuroimaging in the design and

Reduced prefrontal and temporal processing and recall of high “sensation value” ads

Science.gov (United States)

Langleben, Daniel D.; Loughead, James W.; Ruparel, Kosha; Hakun, Jonathan G.; Busch-Winokur, Samantha; Strasser, Andrew; Holloway, Matthew B.; Cappella, Joseph N.; Lerman, Caryn

2010-01-01

Public service announcements (PSAs) are non-commercial broadcast ads that are an important part of televised public health campaigns. “Message sensation value” (MSV), a measure of sensory intensity of audio, visual, and content features of an ad, is an important factor in PSA impact. Some communication theories propose that higher message sensation value brings increased attention and cognitive processing, leading to higher ad impact. Others argue that the attention-intensive format could compete with ad's message for cognitive resources and result in reduced processing of PSA content and reduced overall effectiveness. Brain imaging during PSA viewing provides a quantitative surrogate measure of PSA impact and addresses questions of PSA evaluation and design not accessible with traditional subjective and epidemiological methods. We used Blood Oxygenation Level Dependent (BOLD) functional Magnetic Resonance Imaging (fMRI) and recognition memory measures to compare high and low MSV anti-tobacco PSAs and neutral videos. In a short-delay, forced-choice memory test, frames extracted from PSAs were recognized more accurately than frames extracted from the NV. Frames from the low MSV PSAs were better recognized than frames from the high MSV PSAs. The accuracy of recognition of PSA frames was positively correlated with the prefrontal and temporal, and negatively correlated with the occipital cortex activation. The low MSV PSAs were associated with greater prefrontal and temporal activation, than the high MSV PSAs. The high MSV PSAs produced greater activation primarily in the occipital cortex. These findings support the “dual processing” and “limited capacity” theories of communication that postulate a competition between ad's content and format for the viewers’ cognitive resources and suggest that the “attention-grabbing” high MSV format could impede the learning and retention of an ad. These findings demonstrate the potential of using neuroimaging in

Protozoa manipulation by ultrasound

Directory of Open Access Journals (Sweden)

Yancy Milena Porras Rodríguez

2004-01-01

Full Text Available Microorganism manipulation, considered as controlled motion and positioning, is one of the most important activities in microbiology and medicine. To achieve this goal there are some techniques such as those which and optical forces, among others. These techniques are usually sophisticated, and some of them can induce irreversible alterations on the microorganisms which prevents their use in another tests. Thus, there is justified the study of technological alternatives to manipulate microorganisms in an easy and cost-effective way. This work shows the interaction between protozoa and air microbubbles when they are under the influence of an ultrasonic field of 5.8 mW. At the microbubbles resonant frequencies, microorganisms were attracted toward the bubbles' frontier remaining there while the ultrasonic field was applied. Once the ultrasound disappears, protozoa recover their freedom of movement. The observed effects could be used as the actuation principle of devices capable to trap, hold and release microorganisms of high mobility without any apparent damage. Microbubbles are generated by electrolysis which take place on the surface of an electrode array, while the ultrasound is originated by means of a piezoelectric transducer. As microorganisms there were employed those present in stagnated water, and were observed through an stereomicroscope. Key words: manipulator; protozoa; ultrasonic; transducer; piezoelectric.

Getting Manipulative about Math.

Science.gov (United States)

Scheer, Janet K.; And Others

1984-01-01

Math manipulatives that are made from inexpensive, common items help students understand basic mathematics concepts. Learning activities using Cheerios, jellybeans, and clay as teaching materials are suggested. (DF)

A novel six-degrees-of-freedom series-parallel manipulator

Energy Technology Data Exchange (ETDEWEB)

Gallardo-Alvarado, J.; Rodriguez-Castro, R.; Aguilar-Najera, C. R.; Perez-Gonzalez, L. [Instituto Tecnologico de Celaya, Celaya (Mexico)

2012-06-15

This paper addresses the description and kinematic analyses of a new non-redundant series-parallel manipulator. The primary feature of the robot is to have a decoupled topology consisting of a lower parallel manipulator, for controlling the orientation of the coupler platform, assembled in series connection with a upper parallel manipulator, for controlling the position of the output platform, capable to provide arbitrary poses to the output platform with respect to the fixed platform. The forward displacement analysis is carried-out in semi-closed form solutions by resorting to simple closure equations. On the other hand; the velocity, acceleration and singularity analyses of the manipulator are approached by means of the theory of screws. Simple and compact expressions are derived here for solving the infinitesimal kinematics by taking advantage of the concept of reciprocal screws. Furthermore, the analysis of the Jacobians of the robot shows that the lower parallel manipulator is practically free of singularities. In order to illustrate the performance of the manipulator, a numerical example which consists of solving the inverse/forward kinematics of the series-parallel manipulator as well as its singular configurations is provided.

Manipulation of the Commodity Futures Market Delivery Process.

OpenAIRE

Pirrong, Stephen Craig

1993-01-01

An analysis of the futures market delivery 'end game' specifies necessary and sufficient conditions for long and short traders to manipulate futures prices at contract expiration. The empirical and welfare implications of manipulation are derived as well. Manipulation is most likely to occur in markets where economic frictions (such as transportation and transactions costs) make it inefficient to return excessive deliveries to their original owners. These consumption distortions induce price ...

The top-ten in journal impact factor manipulation.

Science.gov (United States)

Falagas, Matthew E; Alexiou, Vangelis G

2008-01-01

A considerable part of the scientific community is, at least to some degree, involved in the "impact factor game". Editors strive to increase their journals' impact factor (IF) in order to gain influence in the fields of basic and applied research and scientists seek to profit from the "added value" of publishing in top IF journals. In this article we point out the most common "tricks" of engineering and manipulating the IF undertaken by a portion of professionals of the scientific publishing industry. They attempt to increase the nominator or decrease the denominator of the IF equation by taking advantage of certain design flaws and disadvantages of the IF that permit a degree of artificial and arbitrary inflation. Some of these practices, if not scientifically unethical, are at least questionable and should be abandoned. Editors and publishers should strive for quality through fair and thoughtful selection of papers forwarded for peer review and editorial comments that enhance the quality and scientific accuracy of a manuscript.

Remote controlled in-pipe manipulators for milling, welding and EC-testing, for application in BWRS

International Nuclear Information System (INIS)

Seeberger, E.K.

2000-01-01

Many pipes in power plants and industrial facilities have piping sections, which are not accessible from the outside or which are difficult to access. Accordingly, remote controlled pipe machining manipulators have been built which enable in-pipe inspection and repair. Since the 1980s, defects have been found at the Inconel welds of the RPV nozzles of boiling water reactors throughout the world. These defects comprise cracks caused by stress corrosion cracking in areas of manual welds made using the weld filler metal Inconel 182. The cracks were found in Inconel-182 buttering at the ferritic nozzles as well as in the welded joints connecting to the fully-austenitic safe ends (Inconel 600 and stainless steel). These welds are not accessible from outside. The ferritic nozzle is cladded with austenitic material on the inside. The adjacent buttering was applied manually using the weld filler metal Inconel 182. The safe end made of Inconel 600 was welded to the nozzle also using Inconel 182 as the filler metal. The repair problems for inside were solved with remote-controlled in-pipe manipulators which enable in-pipe inspection and repair. A complete systems of manipulators has been developed and qualified for application in nuclear power plants. The tasks that must be performed with this set of in-pipe manipulator are as follows: 1st step - Insertion of the milling/ET manipulator into piping to the work location; 2nd step Detection of the transition line with the ferritic measurement probe; 3rd step - Performance of a surface crack examination by eddy current (ET) method; 4th step - Milling of the groove and preparation for weld backlay and, in case of ET indications, elimination of such flaws also by milling. 5th step - Welding of backlay and/or repair weld using the GTA pulsed arc technique; 6th step - After welding it is necessary to prepare the surface for eddy current testing. A final milling inside the pipe is done with the milling manipulator to adjust the

Even Middle Graders Can Learn with Manipulatives.

Science.gov (United States)

Holden, Linda

1987-01-01

Math manipulatives let students see the components of an abstract problem, help build a concrete language for talking about math concepts, and encourage students to gain confidence in their ability to figure things out. Many suggestions for using manipulatives in math instruction are offered. (MT)

Tools for Manipulation and Characterisation of Nanostructures

DEFF Research Database (Denmark)

Mølhave, Kristian; Bøggild, Peter

grippers, which were then successfully used for pick-and-place manipulation of silicon nanowires. For increased gripping force and control over the manipulation process, microfabricated grippers with integrated force-feedback were also demonstrated. Environmental electron beam deposition (EEBD...... components that are some 10000 times smaller....

Short-term combined effects of thoracic spine thrust manipulation and cervical spine nonthrust manipulation in individuals with mechanical neck pain: a randomized clinical trial.

Science.gov (United States)

Masaracchio, Michael; Cleland, Joshua A; Hellman, Madeleine; Hagins, Marshall

2013-03-01

Randomized clinical trial. To investigate the short-term effects of thoracic spine thrust manipulation combined with cervical spine nonthrust manipulation (experimental group) versus cervical spine nonthrust manipulation alone (comparison group) in individuals with mechanical neck pain. Research has demonstrated improved outcomes with both nonthrust manipulation directed at the cervical spine and thrust manipulation directed at the thoracic spine in patients with neck pain. Previous studies have not determined if thoracic spine thrust manipulation may increase benefits beyond those provided by cervical nonthrust manipulation alone. Sixty-four participants with mechanical neck pain were randomized into 1 of 2 groups, an experimental or comparison group. Both groups received 2 treatment sessions of cervical spine nonthrust manipulation and a home exercise program consisting of active range-of-motion exercises, and the experimental group received additional thoracic spine thrust manipulations. Outcome measures were collected at baseline and at a 1-week follow-up, and included the numeric pain rating scale, the Neck Disability Index, and the global rating of change. Participants in the experimental group demonstrated significantly greater improvements (Ppain rating scale and Neck Disability Index at the 1-week follow-up compared to those in the comparison group. In addition, 31 of 33 (94%) participants in the experimental group, compared to 11 of 31 participants (35%) in the comparison group, indicated a global rating of change score of +4 or higher at the 1-week follow-up, with an associated number needed to treat of 2. Individuals with neck pain who received a combination of thoracic spine thrust manipulation and cervical spine nonthrust manipulation plus exercise demonstrated better overall short-term outcomes on the numeric pain rating scale, the Neck Disability Index, and the global rating of change.

Development of the heavy manipulator vehicle system

International Nuclear Information System (INIS)

Herbst, C.; Paustian, P.; Kruger, W.

1993-01-01

After the severe reactor accident of Tschernobyl in 1986 MaK System started to develop a Heavy Manipulator Vehicle System under contract from German nuclear technology assistance company ''KHG'' (Kerntechnische Hilfsdienst GmbH). The system comprises a remote controlled manipulator vehicle, a mobile mission control stand as well as a transport/service unit. In order to fulfill the high demands of this complex system a couple of new developments had to be started. The paper describes some of these developments and gives an overview about the main features of the Heavy Manipulator Vehicle System (HMV). (author)

Completion of the Heysham 2 peripheral manipulator

International Nuclear Information System (INIS)

Shipp, R.; Ewen, R.O.

1996-01-01

The in-service inspection strategy for the AGR power station at Heysham 2 envisaged a suite of five manipulators to be used for inserting TRIUMPH television cameras into the reactor vessel. Prior to power raising, four of the five had been successfully commissioned and have been in regular use during the subsequent statutory outages. The final device, the Peripheral Manipulator (PM), was eventually completed prior to the 1994 outage and has been successfully deployed on reactor for both the 1994 and 1995 outages. The paper describes the design of the manipulator, its operation and scope of use in the Heysham 2 reactors. (Author)

Modelling and data prerequisites for specific applications of PSA in the management of nuclear plant safety

International Nuclear Information System (INIS)

1994-04-01

The IAEA has a programme which supports the performance and use of probabilistic safety assessments (PSAS) to improve nuclear safety internationally. The assistance offered in this areas by the IAEA to Member States has traditionally focused on planning, performance and peer review of PSAs. PSA activities within the IAEA's programme in the area of applications are presently being expanded. The various applications of PSAs require that PSAs being developed have certain characteristics in terms of their scope, the degree of details in the modelling, the flexibility in performing desired calculations, the quality and type of the data used, and the assumptions made in treating safety significant aspects. In many cases, existing PSAs or PSAs being completed can be extended to fulfill the requirements for uses in many applications to enhance the safety of nuclear power plants. This report provides information on how to carry such extensions by matching PSA characteristics to various applications that are being considered. This report was prepared by consultants together with the IAEA following the recommendations of a Technical Committee Meeting on PSA Requirements for Use in Safety Management, held by the IAEA in co-operation with the Swedish Nuclear Power Inspectorate in Stockholm, Sweden, 16-20 September 1991. 42 refs, 1 tab

A digital joint controller for manipulators

International Nuclear Information System (INIS)

Holt, E.J.; Palmer, D.E.B.

1993-01-01

Nuclear Electric's hydraulic heavy duty manipulators are used at a number of Magnox Power Stations for a wide variety of tasks. In recent years there has been a trend towards the use of manipulators for tasks requiring increasing precision of tip positioning. In order to meet this requirement, a digital controller has been designed to replace the analogue controller board used in almost all manipulator control systems. The new controller allows the programming of a wide range of closed loop control algorithms. Position and drive signal data may be passed to and from the controller by digital means, allowing direct connection to a graphical display system and/or a computer executing a guidance algorithm. The hardware and software design are outlined and performance in the laboratory and the field is reported. (author)

The research on visual industrial robot which adopts fuzzy PID control algorithm

Science.gov (United States)

Feng, Yifei; Lu, Guoping; Yue, Lulin; Jiang, Weifeng; Zhang, Ye

2017-03-01

The control system of six degrees of freedom visual industrial robot based on the control mode of multi-axis motion control cards and PC was researched. For the variable, non-linear characteristics of industrial robot`s servo system, adaptive fuzzy PID controller was adopted. It achieved better control effort. In the vision system, a CCD camera was used to acquire signals and send them to video processing card. After processing, PC controls the six joints` motion by motion control cards. By experiment, manipulator can operate with machine tool and vision system to realize the function of grasp, process and verify. It has influence on the manufacturing of the industrial robot.

A universal microscope manipulator

Directory of Open Access Journals (Sweden)

Peter S. Boyadzhiev

2012-03-01

Full Text Available A modified and improved model of a mechanical manipulator for observation of pinned and mounted insects is described. This device allows movement of the observed object around three perpendicular axes in the field of vision at all magnifications of stereomicroscopes. The main improvement of this new model is positioning of the guiding knobs for rotating around two of the axes next to each other, allowing faster and easier manipulation of the studied object. Thus, one of the main advantages of this device is the possibility to rotate the specimen without the need to refocus. The device enables easily reaching a precession deviation in the intersection point of axes up to 0.5 mm in the process of assembling.

Optoelectronic Tweezers for Microparticle and Cell Manipulation

Science.gov (United States)

Wu, Ming Chiang (Inventor); Chiou, Pei-Yu (Inventor); Ohta, Aaron T. (Inventor)

2014-01-01

An optical image-driven light induced dielectrophoresis (DEP) apparatus and method are described which provide for the manipulation of particles or cells with a diameter on the order of 100 micromillimeters or less. The apparatus is referred to as optoelectric tweezers (OET) and provides a number of advantages over conventional optical tweezers, in particular the ability to perform operations in parallel and over a large area without damage to living cells. The OET device generally comprises a planar liquid-filled structure having one or more portions which are photoconductive to convert incoming light to a change in the electric field pattern. The light patterns are dynamically generated to provide a number of manipulation structures that can manipulate single particles and cells or group of particles/cells. The OET preferably includes a microscopic imaging means to provide feedback for the optical manipulation, such as detecting position and characteristics wherein the light patterns are modulated accordingly.

The Effects on Students' Conceptual Understanding of Electric Circuits of Introducing Virtual Manipulatives within a Physical Manipulatives-Oriented Curriculum

Science.gov (United States)

Zacharia, Zacharias C.; de Jong, Ton

2014-01-01

This study investigates whether Virtual Manipulatives (VM) within a Physical Manipulatives (PM)-oriented curriculum affect conceptual understanding of electric circuits and related experimentation processes. A pre-post comparison study randomly assigned 194 undergraduates in an introductory physics course to one of five conditions: three…

Manipulating Combinatorial Structures.

Science.gov (United States)

Labelle, Gilbert

This set of transparencies shows how the manipulation of combinatorial structures in the context of modern combinatorics can easily lead to interesting teaching and learning activities at every level of education from elementary school to university. The transparencies describe: (1) the importance and relations of combinatorics to science and…

A randomized clinical trial to compare the immediate effects of seated thoracic manipulation and targeted supine thoracic manipulation on cervical spine flexion range of motion and pain.

Science.gov (United States)

Karas, Steve; Olson Hunt, Megan J

2014-05-01

Randomized clinical trial. To determine the effectiveness of seated thoracic manipulation versus targeted supine thoracic manipulation on cervical spine pain and flexion range of motion (ROM). There is evidence that thoracic spine manipulation is an effective treatment for patients with cervical spine pain. This evidence includes a variety of techniques to manipulate the thoracic spine. Although each of them is effective, no research has compared techniques to determine which produces the best outcomes. A total of 39 patients with cervical spine pain were randomly assigned to either a seated thoracic manipulation or targeted supine thoracic manipulation group. Pain and flexion ROM measures were taken before and after the intervention. Pain reduction (post-treatment-pre-treatment) was significantly greater in those patients receiving the targeted supine thoracic manipulation compared to the seated thoracic manipulation (Pmanipulation group. The results of this study indicate that a targeted supine thoracic manipulation may be more effective in reducing cervical spine pain and improving cervical flexion ROM than a seated thoracic manipulation. Future studies should include a variety of patients and physical therapists (PTs) to validate our findings.

Manipulation of Biofilm Microbial Ecology

Energy Technology Data Exchange (ETDEWEB)

White, D.C.; Palmer, R.J., Jr.; Zinn, M.; Smith, C.A.; Burkhalter, R.; Macnaughton, S.J.; Whitaker, K.W.; Kirkegaard, R.D.

1998-08-15

The biofilm mode of growth provides such significant advantages to the members of the consortium that most organisms in important habitats are found in biofilms. The study of factors that allow manipulation of biofilm microbes in the biofilm growth state requires that reproducible biofilms be generated. The most effective monitoring of biofilm formation, succession and desaturation is with on-line monitoring of microbial biofilms with flowcell for direct observation. The biofilm growth state incorporates a second important factor, the heterogeneity in distribution in time and space of the component members of the biofilm consortium. This heterogeneity is reflected not only in the cellular distribution but in the metabolic activity within a population of cells. Activity and cellular distribution can be mapped in four dimensions with confocal microscopy, and function can be ascertained by genetically manipulated reporter functions for specific genes or by vital stains. The methodology for understanding the microbial ecology of biofilms is now much more readily available and the capacity to manipulate biofilms is becoming an important feature of biotechnology.

Manipulation Robustness of Collaborative Filtering Systems

OpenAIRE

Benjamin Van Roy; Xiang Yan

2009-01-01

A collaborative filtering system recommends to users products that similar users like. Collaborative filtering systems influence purchase decisions, and hence have become targets of manipulation by unscrupulous vendors. We provide theoretical and empirical results demonstrating that while common nearest neighbor algorithms, which are widely used in commercial systems, can be highly susceptible to manipulation, two classes of collaborative filtering algorithms which we refer to as linear and a...

Remote Decontamination Facility and Repair Station for hot-cell manipulators

International Nuclear Information System (INIS)

Ryz, M.A.

1977-01-01

Increasingly high radiation levels on manipulators at the Whiteshell Nuclear Research Establishment, Pinawa, Manitoba, Canada, necessitated design and construction of a Remote Decontamination Facility and Repair Station. This facility reduces radiation levels on manipulators by an order of magnitude over previous hand decontamination techniques. The reduced radiation levels have allowed superior manipulator repair and maintenance, resulting in 50% fewer manipulator breakdowns

Estimation of component failure rates for PSA on nuclear power plants 1982-1997

International Nuclear Information System (INIS)

Kirimoto, Yukihiro; Matsuzaki, Akihiro; Sasaki, Atsushi

2001-01-01

Probabilistic safety assessment (PSA) on nuclear power plants has been studied for many years by the Japanese industry. The PSA methodology has been improved so that PSAs for all commercial LWRs were performed and used to examine for accident management.On the other hand, most data of component failure rates in these PSAs were acquired from U.S. databases. Nuclear Information Center (NIC) of Central Research Institute of Electric Power Industry (CRIEPI) serves utilities by providing safety- , and reliability-related information on operation and maintenance of the nuclear power plants, and by evaluating the plant performance and incident trends. So, NIC started a research study on estimating the major component failure rates at the request of the utilities in 1988. As a result, we estimated the hourly-failure rates of 47 component types and the demand-failure rates of 15 component types. The set of domestic component reliability data from 1982 to 1991 for 34 LWRs has been evaluated by a group of PSA experts in Japan at the Nuclear Safety Research Association (NSRA) in 1995 and 1996, and the evaluation report was issued in March 1997. This document describes the revised component failure rate calculated by our re-estimation on 49 Japanese LWRs from 1982 to 1997. (author)

A new approach to adaptive control of manipulators

Science.gov (United States)

Seraji, H.

1987-01-01

An approach in which the manipulator inverse is used as a feedforward controller is employed in the adaptive control of manipulators in order to achieve trajectory tracking by the joint angles. The desired trajectory is applied as an input to the feedforward controller, and the controller output is used as the driving torque for the manipulator. An adaptive algorithm obtained from MRAC theory is used to update the controller gains to cope with variations in the manipulator inverse due to changes of the operating point. An adaptive feedback controller and an auxiliary signal enhance closed-loop stability and achieve faster adaptation. Simulation results demonstrate the effectiveness of the proposed control scheme for different reference trajectories, and despite large variations in the payload.

Tobacco industry control of menthol in cigarettes and targeting of adolescents and young adults.

Science.gov (United States)

Kreslake, Jennifer M; Wayne, Geoffrey Ferris; Alpert, Hillel R; Koh, Howard K; Connolly, Gregory N

2008-09-01

We examined whether tobacco manufacturers manipulate the menthol content of cigarettes in an effort to target adolescents and young adults. We analyzed data from tobacco industry documents describing menthol product development, results of laboratory testing of US menthol brands, market research reports, and the 2006 National Survey on Drug Use and Health. The tobacco industry attracted new smokers by promoting cigarettes with lower menthol content, which were popular with adolescents and young adults, and provided cigarettes with higher menthol content to long-term smokers. Menthol cigarette sales remained stable from 2000 to 2005 in the United States, despite a 22% decline in overall packs sold. Tobacco companies manipulate the sensory characteristics of cigarettes, including menthol content, thereby facilitating smoking initiation and nicotine dependence. Menthol brands that have used this strategy have been the most successful in attracting youth and young adult smokers and have grown in popularity.

Manipulator for rotating and translating a sample holder

Science.gov (United States)

van de Water, Jeroen [Breugel, NL; van den Oetelaar, Johannes [Eindhoven, NL; Wagner, Raymond [Gorinchem, NL; Slingerland, Hendrik Nicolaas [Venlo, NL; Bruggers, Jan Willem [Eindhoven, NL; Ottevanger, Adriaan Huibert Dirk [Malden, NL; Schmid, Andreas [Berkeley, CA; Olson, Eric A [Champaign, IL; Petrov, Ivan G [Champaign, IL; Donchev, Todor I [Urbana, IL; Duden, Thomas [Kensington, CA

2011-02-08

A manipulator for use in e.g. a Transmission Electron Microscope (TEM) is described, said manipulator capable of rotating and translating a sample holder (4). The manipulator clasps the round sample holder between two members (3A, 3B), said members mounted on actuators (2A, 2B). Moving the actuators in the same direction results in a translation of the sample holder, while moving the actuators in opposite directions results in a rotation of the sample holder.

Machine Learnig for Robotic Manipulation in cluttered environments

OpenAIRE

Alet Puig, Ferran

2016-01-01

In this thesis we focus on designing the planner for MIT s entry in the Amazon Picking Challenge, a robotic competition aiming at pushing the frontiers of manipulation until robots can substitute human pickers in warehouses. Given a set of manipulation primitives (such as grasping, suction, scooping, placing or pushing) we designed a system capable of learning a planner from a set of manipulation experiments. After learning, given any configuration of objects, the planner can come up with the...

Nonlinear Dynamics of Controlled Synchronizations of Manipulator System

Directory of Open Access Journals (Sweden)

Qingkai Han

2014-01-01

Full Text Available The nonlinear dynamics of the manipulator system which is controlled to achieve the synchronization motions is investigated in the paper. Firstly, the control strategies and modeling approaches of the manipulator system are given, in which the synchronization goal is defined by both synchronization errors and its derivatives. The synchronization controllers applied on the manipulator system include neuron synchronization controller, improved OPCL synchronization controller, and MRAC-PD synchronization controller. Then, an improved adaptive synchronized control strategy is proposed in order to estimate online the unknown structure parameters and state variables of the manipulator system and to realize the needed synchronous compensation. Furthermore, a robust adaptive synchronization controller is also researched to guarantee the dynamic stability of the system. Finally, the stability of motion synchronizations of the manipulator system possessing nonlinear component is discussed, together with the effect of control parameters and joint friction and others. Some typical motions such as motion bifurcations and the loss of synchronization of it are obtained and illustrated as periodic, multiperiodic, and/or chaotic motion patterns.

Tobacco industry manipulation of data on and press coverage of the illicit tobacco trade in the UK.

Science.gov (United States)

Rowell, A; Evans-Reeves, K; Gilmore, A B

2014-05-01

In the UK, transnational tobacco companies (TTCs) have been arguing that levels of illicit trade are high and increasing and will rise further if standardised packaging is implemented. This paper examines trends in and accuracy of media reporting of, and industry data on, illicit tobacco in the UK. Quantification of the volume, nature and quality of press articles citing industry data on illicit tobacco in UK newspapers from March 2008 to March 2013. Examination of published TTC data on illicit, including a comparison with independent data and of TTC reporting of Her Majesty's Revenue and Customs data on illicit. Media stories citing industry data on illicit tobacco began in June 2011, 2 months after the Tobacco Control Plan for England, which heralded standardised packaging, was published. The majority of data cited are based on industry Empty Pack Surveys for which no methodology is available. For almost all parts of the country where repeat data were cited in press stories, they indicated an increase, often substantial, in non-domestic/illicit cigarettes that is not supported by independent data. Similarly, national data from two published industry sources show a sudden large increase in non-domestic product between 2011 and 2012. Yet the methodology of one report changes over this period and the other provides no published methodology. In contrast, independent data show steady declines in non-domestic and illicit cigarette penetration from 2006 to 2012 and either a continued decline or small increase to 2013. Industry claims that use of Non-UK Duty Paid/illicit cigarettes in the UK is sharply increasing are inconsistent with historical trends and recent independent data. TTCs are exaggerating the threat of illicit tobacco by commissioning surveys whose methodology and validity remain uncertain, planting misleading stories and misquoting government data. Industry data on levels of illicit should be treated with extreme caution. Published by the BMJ Publishing

Particle manipulation techniques in AEgIS

Energy Technology Data Exchange (ETDEWEB)

Canali, C., E-mail: canali@ge.infn.it; Carraro, C.; Di Noto, L.; Krasnicky, D.; Lagomarsino, V.; Testera, G.; Zavatarelli, S. [Istituto Nazionale Fisica Nucleare Sez. Genova (Italy)

2011-07-15

The AEgIS experiment (http://aegis.web.cern.chhttp://aegis.web.cern.ch) will measure the gravitational acceleration g of antihydrogen. Once performed this could be the first direct test of the gravitational interaction between matter and antimatter. In the AEgIS experiment a beam of antihydrogen will travel horizontally along a path of about 1 m trough a moire deflectometer followed by a position sensitive detector. The g value will be obtained measuring the vertical displacement of the annihilation patterns. Before producing the beam, several tasks have to be performed mainly involving positron and electron plasma manipulation and particles cooling in Malmberg-Penning traps. The AEgIS experiment is currently under construction at CERN, meanwhile several tests involving particle manipulation and particle cooling are in progress. In this report some experimental results involving diocotron manipulation of plasma will be presented.

Neuro-fuzzy inverse model control structure of robotic manipulators utilized for physiotherapy applications

Directory of Open Access Journals (Sweden)

A.A. Fahmy

2013-12-01

Full Text Available This paper presents a new neuro-fuzzy controller for robot manipulators. First, an inductive learning technique is applied to generate the required inverse modeling rules from input/output data recorded in the off-line structure learning phase. Second, a fully differentiable fuzzy neural network is developed to construct the inverse dynamics part of the controller for the online parameter learning phase. Finally, a fuzzy-PID-like incremental controller was employed as Feedback servo controller. The proposed control system was tested using dynamic model of a six-axis industrial robot. The control system showed good results compared to the conventional PID individual joint controller.

Nonlinear Control of Hydraulic Manipulator for Decommissioning Nuclear Reactor

Energy Technology Data Exchange (ETDEWEB)

Kim, Myoung-Ho; Lee, Sung-Uk; Kim, Chang-Hoi; Choi, Byung-Seon; Moon, Jei-Kwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Robot technique is need to decommission nuclear reactor because of high radiation environment. Especially, Manipulator systems are useful for dismantling complex structure in a nuclear facility. In addition, Hydraulic system is applied to handle heavy duty object. Since hydraulic system can demonstrate high power. The manipulator with hydraulic power is already developed. To solve this problem, various nonlinear control method includes acceleration control. But, it is difficult because acceleration value is highly noisy. In this paper, the nonlinear control algorithm without acceleration control is studied. To verify, the hydraulic manipulator model had been developed. Furthermore, the numerical simulation is carried out. The nonlinear control without acceleration parameter method is developed for hydraulic manipulator. To verify control algorithm, the manipulator is modeled by MBD and the hydraulic servo system is also derived. In addition, the numerical simulation is also carried out. Especially, PID gain is determined though TDC algorithm. In the result of numerical simulation, tracking performance is good without acceleration control. Thus, the PID though TDC with SMC is good for hydraulic manipulator control.

Nonlinear Control of Hydraulic Manipulator for Decommissioning Nuclear Reactor

International Nuclear Information System (INIS)

Kim, Myoung-Ho; Lee, Sung-Uk; Kim, Chang-Hoi; Choi, Byung-Seon; Moon, Jei-Kwon

2016-01-01

Robot technique is need to decommission nuclear reactor because of high radiation environment. Especially, Manipulator systems are useful for dismantling complex structure in a nuclear facility. In addition, Hydraulic system is applied to handle heavy duty object. Since hydraulic system can demonstrate high power. The manipulator with hydraulic power is already developed. To solve this problem, various nonlinear control method includes acceleration control. But, it is difficult because acceleration value is highly noisy. In this paper, the nonlinear control algorithm without acceleration control is studied. To verify, the hydraulic manipulator model had been developed. Furthermore, the numerical simulation is carried out. The nonlinear control without acceleration parameter method is developed for hydraulic manipulator. To verify control algorithm, the manipulator is modeled by MBD and the hydraulic servo system is also derived. In addition, the numerical simulation is also carried out. Especially, PID gain is determined though TDC algorithm. In the result of numerical simulation, tracking performance is good without acceleration control. Thus, the PID though TDC with SMC is good for hydraulic manipulator control

The application of manipulator robot for nuclear power plant maintenance

International Nuclear Information System (INIS)

Fujita, Jun; Onishi, Ken

2009-01-01

In the maintenance works at nuclear power plant, robots are used because of high radiation, narrow space and underwater work. In light of manufacture period, cost and reliability, various maintenance works are requested to be done by one robot. As one of the solutions, we developed manipulator robots for the access of specialized tools. This study shows manipulator robots developed by MHI, application example to maintenance works and effectiveness of manipulator robots. When robotization of maintenance works are considered, manipulator technology is very effective solution means. The manipulator technologies in this study are able to apply to robotization needed under radiation environment. (author)

Application of model based control to robotic manipulators

Science.gov (United States)

Petrosky, Lyman J.; Oppenheim, Irving J.

1988-01-01

A robot that can duplicate humam motion capabilities in such activities as balancing, reaching, lifting, and moving has been built and tested. These capabilities are achieved through the use of real time Model-Based Control (MBC) techniques which have recently been demonstrated. MBC accounts for all manipulator inertial forces and provides stable manipulator motion control even at high speeds. To effectively demonstrate the unique capabilities of MBC, an experimental robotic manipulator was constructed, which stands upright, balancing on a two wheel base. The mathematical modeling of dynamics inherent in MBC permit the control system to perform functions that are impossible with conventional non-model based methods. These capabilities include: (1) Stable control at all speeds of operation; (2) Operations requiring dynamic stability such as balancing; (3) Detection and monitoring of applied forces without the use of load sensors; (4) Manipulator safing via detection of abnormal loads. The full potential of MBC has yet to be realized. The experiments performed for this research are only an indication of the potential applications. MBC has no inherent stability limitations and its range of applicability is limited only by the attainable sampling rate, modeling accuracy, and sensor resolution. Manipulators could be designed to operate at the highest speed mechanically attainable without being limited by control inadequacies. Manipulators capable of operating many times faster than current machines would certainly increase productivity for many tasks.

Cold Atmospheric Plasma Manipulation of Proteins in Food Systems

DEFF Research Database (Denmark)

Tolouie, Haniye; Hashemi, Maryam; Mohammadifar, Mohammad Amin

2017-01-01

Plasma processing has been getting a lot of attention in recent applications as a novel, eco-friendly, and highly efficient approach. Cold plasma has mostly been used to reduce microbial counts in foodstuff and biological materials, as well as in different levels of packaging, particularly in cases...... of plasma on the conformation and function of proteins with food origin, especially enzymes and allergens, as well as protein-made packaging films. In enzyme manipulation with plasma, deactivation has been reported to be either partial or complete. In addition, an activity increase has been observed in some...... where there is thermal sensitivity. As it is a very recent application, the impact of cold plasma treatment has been studied on the protein structures of food and pharmaceutical systems, as well as in the packaging industry. Proteins, as a food constituent, play a remarkable role in the techno...

Design and Transmission Analysis of an Asymmetrical Spherical Parallel Manipulator

DEFF Research Database (Denmark)

Wu, Guanglei; Caro, Stéphane; Wang, Jiawei

2015-01-01

analysis and optimal design of the proposed manipulator based on its kinematic analysis. The input and output transmission indices of the manipulator are defined for its optimum design based on the virtual coefficient between the transmission wrenches and twist screws. The sets of optimal parameters......This paper presents an asymmetrical spherical parallel manipulator and its transmissibility analysis. This manipulator contains a center shaft to both generate a decoupled unlimited-torsion motion and support the mobile platform for high positioning accuracy. This work addresses the transmission...... are identified and the distribution of the transmission index is visualized. Moreover, a comparative study regarding to the performances with the symmetrical spherical parallel manipulators is conducted and the comparison shows the advantages of the proposed manipulator with respect to its spherical parallel...

Know Stroke: Know the Signs, Act in Time Video

Medline Plus

Full Text Available ... Campaign Stroke Materials » Brochures » Toolkits and Posters » Radio PSAs » Videos and TV PSAs » Widgets » Infographics Health Professional Resources Campaign Partners Research ...

Dynamics three-tier hydraulic crane-manipulators

OpenAIRE

Lagerev I.A.; Lagerev A.V.

2018-01-01

The methods and generalized recommendations for modeling dynamic loading of load-bearing elements of steel structures of three-tier hydraulic cranes-manipulators are considered. Mathematical models have been developed to study the dynamics of moving elements of the crane-manipulator, the movement of the load-lifting machine on a stochastic uneven surface with a suspended load. The presented approaches can be used to calculate other types of jib cranes equipped with hydraulic drive.

Counterweight system for master-slave manipulator

International Nuclear Information System (INIS)

Haaker, L.W.; Jelatis, D.G.

1981-01-01

A counterweight system is described for use in a remote control master-slave manipulator. The manipulator consists of a rotatable horizontal support adapted to extend through the wall and two longitudinally extensible arms, a master and a slave, pivotally connected one to each end of the support. Within the support there is a means of translating linear motion to rotary motion for transfer through the barrier wall and retranslating to linear motion. (U.K.)

DEVELOPING INDUSTRIAL ROBOT SIMULATION MODEL TUR10-K USING “UNIVERSAL MECHANISM” SOFTWARE COMPLEX

Directory of Open Access Journals (Sweden)

Vadim Vladimirovich Chirkov

2018-02-01

Full Text Available Manipulation robots are complex spatial mechanical systems having five or six degrees of freedom, and sometimes more. For this reason, modeling manipulative robots movement, even in the kinematic formulation, is a complex mathematical task. If one moves from kinematic modeling of motion to dynamic modeling then there must be taken into account the inertial properties of the modeling object. In this case, analytical constructing of such a complex object mathematical model as a manipulation robot becomes practically impossible. Therefore, special computer-aided design systems, called CAE-systems, are used for modeling complex mechanical systems. The purpose of the paper is simulation model construction of a complex mechanical system, such as the industrial robot TUR10-K, to obtain its dynamic characteristics. Developing such models makes it possible to reduce the complexity of designing complex systems process and to obtain the necessary characteristics. Purpose. Developing the simulation model of the industrial robot TUR10-K and obtaining dynamic characteristics of the mechanism. Methodology: the article is used a computer simulation method. Results: There is obtained the simulation model of the robot and its dynamic characteristics. Practical implications: the results can be used in the mechanical systems design and various simulation models.

Effects of Online Comments on Smokers' Perception of Anti-Smoking Public Service Announcements.

Science.gov (United States)

Shi, Rui; Messaris, Paul; Cappella, Joseph N

2014-07-01

On YouTube anti-smoking PSAs are widely viewed and uploaded; they also receive extensive commentary by viewers. This study examined whether such evaluative comments with or without uncivil expressions influence evaluations by subsequent viewers. Results showed PSAs with positive (i.e. anti-smoking) comments were perceived by smokers as more effective than PSAs with negative (pro smoking) comments. Smokers in the no comment condition gave the highest perceived effectiveness score to PSAs. Smokers' readiness to quit smoking moderated the effect of comments on PSA evaluation. Smokers reading negative uncivil comments reported more negative attitude toward quitting and a lower level of perceived risk of smoking than those reading negative civil comments but positive civil and positive uncivil comments didn't elicit different responses.

Effects of Online Comments on Smokers’ Perception of Anti-Smoking Public Service Announcements

Science.gov (United States)

Shi, Rui; Messaris, Paul; Cappella, Joseph N.

2014-01-01

On YouTube anti-smoking PSAs are widely viewed and uploaded; they also receive extensive commentary by viewers. This study examined whether such evaluative comments with or without uncivil expressions influence evaluations by subsequent viewers. Results showed PSAs with positive (i.e. anti-smoking) comments were perceived by smokers as more effective than PSAs with negative (pro smoking) comments. Smokers in the no comment condition gave the highest perceived effectiveness score to PSAs. Smokers’ readiness to quit smoking moderated the effect of comments on PSA evaluation. Smokers reading negative uncivil comments reported more negative attitude toward quitting and a lower level of perceived risk of smoking than those reading negative civil comments but positive civil and positive uncivil comments didn't elicit different responses. PMID:25561825

Techniques applied in design optimization of parallel manipulators

CSIR Research Space (South Africa)

Modungwa, D

2011-11-01

Full Text Available the desired dexterous workspace " Robot.Comput.Integrated Manuf., vol. 23, pp. 38 - 46, 2007. [12] A.P. Murray, F. Pierrot, P. Dauchez and J.M. McCarthy, "A planar quaternion approach to the kinematic synthesis of a parallel manipulator " Robotica, vol... design of a three translational DoFs parallel manipulator " Robotica, vol. 24, pp. 239, 2005. [15] J. Angeles, "The robust design of parallel manipulators," in 1st Int. Colloquium, Collaborative Research Centre 562, 2002. [16] S. Bhattacharya, H...

Evidence of market manipulation in the financial crisis

OpenAIRE

Vedant Misra; Marco Lagi; Yaneer Bar-Yam

2011-01-01

We provide direct evidence of market manipulation at the beginning of the financial crisis in November 2007. The type of manipulation, a "bear raid," would have been prevented by a regulation that was repealed by the Securities and Exchange Commission in July 2007. The regulation, the uptick rule, was designed to prevent manipulation and promote stability and was in force from 1938 as a key part of the government response to the 1929 market crash and its aftermath. On November 1, 2007, Citigr...

Manipulating Tournaments in Cup and Round Robin Competitions

OpenAIRE

Russell, Tyrel; Walsh, Toby

2009-01-01

In sports competitions, teams can manipulate the result by, for instance, throwing games. We show that we can decide how to manipulate round robin and cup competitions, two of the most popular types of sporting competitions in polynomial time. In addition, we show that finding the minimal number of games that need to be thrown to manipulate the result can also be determined in polynomial time. Finally, we show that there are several different variations of standard cup competitions where mani...

78 FR 54502 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing of...

Science.gov (United States)

2013-09-04

...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing of a Proposed Rule... Authority, Inc. (``FINRA'') filed with the Securities and Exchange Commission (``SEC'' or ``Commission... or manipulative motivation for the trading activity at issue.\\4\\ Specifically, proposed Supplementary...

Development and design optimization of water hydraulic manipulator for ITER

International Nuclear Information System (INIS)

Kekaelaeinen, Teemu; Mattila, Jouni; Virvalo, Tapio

2009-01-01

This paper describes one of the research projects carried out in The Preparation of Remote Handling Engineers for ITER (PREFIT) program within the European Fusion Training Scheme (EFTS). This research project is focusing on the design and optimization of water hydraulic manipulators used to test several remote handling tasks of ITER at Divertor Test Platform 2 (DTP2), Tampere, Finland, and later in ITER. In this project, a water hydraulic manipulator designed and build by Department of Intelligent Hydraulics and Automation in Tampere University of Technology, Finland (TUT/IHA) is further optimized as a case study for a given manipulator requirement specification in order to illustrate and verify developed comprehensive design guidelines and performance metrics. Without meaningful manipulator performance parameters, the evaluation of alternative robot manipulators designs remains ad hoc at best. Therefore, more comprehensive design guidelines and performance metrics are needed for comparing and improving different existing manipulators versus task requirements or for comparing different digital prototypes at early design phase of manipulators. In this paper the description of the project, its background and developments are presented and discussed.

Design principles for six degrees-of-freedom MEMS-based precision manipulators

NARCIS (Netherlands)

Brouwer, Dannis Michel

2007-01-01

In the future, the precision manipulation of small objects will become more and more important for appliances such as data storage, micro assembly, sample manipulation in microscopes, cell manipulation, and manipulation of beam paths by micro mirrors. At the same time, there is a drive towards

Remote telerobotic replacement for master-slave manipulator

International Nuclear Information System (INIS)

Heckendorn, F.M.; Iverson, D.C.; LaValle, D.R.

1997-01-01

A remotely replaceable telerobotic manipulator (TRM) has been developed and deployed at the Defense Waste Processing Facility (DWPF) in support of its radioactive operation. The TRM replaces a Master-Slave Manipulator (MSM). The TRM is in use for both routine and recovery operations for the radioactive waste vitrification melter, the primary production device within the DWPF. The arm was designed for deployment and operation using an existing MSM penetration. This replacement of an existing MSM with a high power robotic device demonstrates the capability to perform similar replacement in other operating facilities. The MSM's were originally deployed in the DWPF to perform routine light capacity tasks. During the testing phase of the DWPF, prior to its radioactive startup in 5/96, the need to remove glass deposits that can form at the melter discharge during filling of glass containment canisters was identified. The combination of high radiation and contamination in the DWPF melter cell during radioactive operation eliminated personnel entry as a recovery option. Therefore remote cleaning methods had to be devised. The MSM's had neither the reach nor the strength required for this task. It became apparent that a robust manipulator arm would be required for recovery from these potential melter discharge pluggage events. The existing wall penetrations, used for the MSM's, could not be altered for seismic and radiological reasons. The new manipulator was required to be of considerable reach, due to existing physical layout, and strength, due to the glass removal requirement. Additionally, the device would have to compatible with high radiation and remote crane installation. The physical size of the manipulator and the weight of components must be consistent with the existing facilities. It was recognized early-on that a manipulator of sufficient strength to recover from a pluggage event would require robotic functions to constrain undesirable motions

Currency Manipulation

OpenAIRE

Weithing Zhang; Thomas Mertens; Tarek Hassan

2014-01-01

Many central banks manage the stochastic behavior of their currencies' exchange rates by imposing pegs relative to a target currency. We study the effects of such currency manipulation in a multi-country model of exchange rate determination with endogenous capital accumulation. We find that the imposition of an exchange rate peg relative to a given target currency increases the volatility of consumption in the target country and decreases the volatility of the target currency's exchange rate ...

Kinematically Optimal Robust Control of Redundant Manipulators

Science.gov (United States)

Galicki, M.

2017-12-01

This work deals with the problem of the robust optimal task space trajectory tracking subject to finite-time convergence. Kinematic and dynamic equations of a redundant manipulator are assumed to be uncertain. Moreover, globally unbounded disturbances are allowed to act on the manipulator when tracking the trajectory by the endeffector. Furthermore, the movement is to be accomplished in such a way as to minimize both the manipulator torques and their oscillations thus eliminating the potential robot vibrations. Based on suitably defined task space non-singular terminal sliding vector variable and the Lyapunov stability theory, we derive a class of chattering-free robust kinematically optimal controllers, based on the estimation of transpose Jacobian, which seem to be effective in counteracting both uncertain kinematics and dynamics, unbounded disturbances and (possible) kinematic and/or algorithmic singularities met on the robot trajectory. The numerical simulations carried out for a redundant manipulator of a SCARA type consisting of the three revolute kinematic pairs and operating in a two-dimensional task space, illustrate performance of the proposed controllers as well as comparisons with other well known control schemes.

Manipulating the Gradient

Science.gov (United States)

Gaze, Eric C.

2005-01-01

We introduce a cooperative learning, group lab for a Calculus III course to facilitate comprehension of the gradient vector and directional derivative concepts. The lab is a hands-on experience allowing students to manipulate a tangent plane and empirically measure the effect of partial derivatives on the direction of optimal ascent. (Contains 7…

Simple Ontology of Manipulation Actions based on Hand-Object Relations

DEFF Research Database (Denmark)

Wörgötter, Florentin; Aksoy, E. E.; Krüger, Norbert

2013-01-01

and time. For this we use as temporal anchor points those moments where two objects (or hand and object) touch or un-touch each other during a manipulation. We show that by this one can define a relatively small tree-like manipulation ontology. We find less than 30 fundamental manipulations. The temporal...... and encoded. Examples of manipulations recognition and execution by a robot based on this representation are given at the end of this study....

Manipulation of Cash-Settled Futures Contracts.

OpenAIRE

Pirrong, Craig

2001-01-01

Replacement of delivery settlement of futures contracts with cash settlement is frequently proposed to reduce the frequency of market manipulation. This article shows that it is always possible to design a delivery-settled futures contract that is less susceptible to cornering by a large long than any given cash-settled contract. Such a contract is more susceptible to manipulation by large shorts, however. Therefore, cash settlement does not uniformly dominate delivery settlement as a means o...

Sports Tournament Predictions Using Direct Manipulation

OpenAIRE

Vuillemot , Romain; Perin , Charles

2016-01-01

An advanced interface for sports tournament predictions uses direct manipulation to allow users to make nonlinear predictions. Unlike previous interface designs, the interface helps users focus on their prediction tasks by enabling them to first choose a winner and then fill out the rest of the bracket. In real-world tests of the proposed interface (for the 2014 FIFA World Cup tournament and 2015/2016 UEFA Champions League), the authors validated the use of direct manipulation as an alternati...

HUMAN NATURE: BETWEEN PERSUASION AND MANIPULATION

Directory of Open Access Journals (Sweden)

CRISTINA LUCIA ȘUTIU

2014-11-01

Full Text Available Each word is an attempt to influence other persons, as Alex Mucchielli said. Communication, by using words, is a characteristic of human beings, and it plays an important role in everyday life. Communication can be seen as an attempt to share information through a process of symbolic interaction between human beings. It is an essential life process through which humans create, transmit and utilize information by words. Putting words in act, we can express feelings, we can share opinions and we can obtain whatever we want, finally. It is essential to take into account certain ethical rules whenever we start a communication process. As the main purpose of communication is to convince people, this goal can be achieved only by using persuasion and/or manipulation. The last century is a sort of witness as regards the use of words in order to persuade people to adhere to certain ideological precepts and to determine them to act in a certain desirable way by the initiators of the communication process. Practically, there is a fine line between persuasion and manipulation; and in this situation, it is hard for ordinary people to distinguish between them. Manipulation appears like a persuasive process and it hides its true aims. This is the only way by which it can operate and for that it is considered immoral and invasive in the mind and soul of people. Human beings are now in the position to look for a way to protect themselves against such an invasive act and to find a way to distinguish between correct and false information. What can we do? In this study we analyze persuasion and manipulation from an ethical point of view and we search for paths to protect ourselves from the manipulative techniques.

Manipulator Comparative Testing Program: Final report

International Nuclear Information System (INIS)

Draper, J.V.; Handel, S.J.; Sundstrom, E.; Herndon, J.N; Fujita, Y.; Maeda, M.

1987-02-01

The manipulator systems tested included the Meidensha BILARM 83A, the Central Research Laboratories Model M-2, and the GCA PaR Systems Model 6000. Six manipulator and control mode combinations were evaluated: (1) the BILARM in master/slave mode without force reflection, (2) the BILARM in master/slave mode with force reflection, (3) the Model M-2 in master/slave mode without force reflection, (4) the Model M-2 in master/slave mode with force reflection, (5) the BILARM with switchbox controls, and (6) the PaR 6000 with switchbox controls. The experiments examined differences between master/slave systems with and without force reflection and differences between master/slave systems and switchbox-controlled systems. A fourth experiment examined the relative contributions of the remote viewing system and the manipulator system to the performance of remote handling tasks. Results of the experiments showed that operators using the Model M-2 in master/slave mode had significantly faster times to completion than operators using the BILARM in master/slave mode, with about the same error rate per trial. Operators were slower using the BILARM with force reflection than without it, and they committed more errors. There was no statistically significant difference between force-reflection and nonforce-reflection conditions for the M-2 manipulator for any of the performance criteria. Tasks and procedures used in this testing were not sensitive to differences within any single system. No inferences about the effect of force reflection on remote task performance should be made from these data. The two manipulator systems in switchbox mode had significantly slower times to completion than any system in master/slave mode, with approximately the same error rate per trial. There were no significant differences between the BILARM in switchbox mode and the PaR arm

Acoustic Devices for Particle and Cell Manipulation and Sensing

Directory of Open Access Journals (Sweden)

Yongqiang Qiu

2014-08-01

Full Text Available An emerging demand for the precise manipulation of cells and particles for applications in cell biology and analytical chemistry has driven rapid development of ultrasonic manipulation technology. Compared to the other manipulation technologies, such as magnetic tweezing, dielectrophoresis and optical tweezing, ultrasonic manipulation has shown potential in a variety of applications, with its advantages of versatile, inexpensive and easy integration into microfluidic systems, maintenance of cell viability, and generation of sufficient forces to handle particles, cells and their agglomerates. This article briefly reviews current practice and reports our development of various ultrasonic standing wave manipulation devices, including simple devices integrated with high frequency (>20 MHz ultrasonic transducers for the investigation of biological cells and complex ultrasonic transducer array systems to explore the feasibility of electronically controlled 2-D and 3-D manipulation. Piezoelectric and passive materials, fabrication techniques, characterization methods and possible applications are discussed. The behavior and performance of the devices have been investigated and predicted with computer simulations, and verified experimentally. Issues met during development are highlighted and discussed. To assist long term practical adoption, approaches to low-cost, wafer level batch-production and commercialization potential are also addressed.

Remote manipulation techniques in the maintenance and repair of nuclear power plants

International Nuclear Information System (INIS)

Rininsland, H.; Boehme, G.

1986-01-01

Remote manipulation means the application of multi-purpose devices featuring high mobility and universal applicability. The paper describes such a remote manipulation system (manipulation vehicle MF1 and MF2, master-slave manipulator, TFTR maintenance manipulator) which can be used flexibly in the NNP during maintenance and repair and in incident and accident situations. Connecting elements and tools can be redesigned for remote manipulation to meet the specific application environments. (DG) [de

Engineering industrial oil biosynthesis: cloning and characterization of Kennedy pathway acyltransferases from novel oilseed species

Science.gov (United States)

For more than twenty years, various industrial, governmental, and academic laboratories have developed and refined genetic engineering strategies aimed at manipulating lipid metabolism in plants and microbes. The goal of these projects is to produce renewable specialized oils that can effectively c...

A motion sensing-based framework for robotic manipulation.

Science.gov (United States)

Deng, Hao; Xia, Zeyang; Weng, Shaokui; Gan, Yangzhou; Fang, Peng; Xiong, Jing

2016-01-01

To data, outside of the controlled environments, robots normally perform manipulation tasks operating with human. This pattern requires the robot operators with high technical skills training for varied teach-pendant operating system. Motion sensing technology, which enables human-machine interaction in a novel and natural interface using gestures, has crucially inspired us to adopt this user-friendly and straightforward operation mode on robotic manipulation. Thus, in this paper, we presented a motion sensing-based framework for robotic manipulation, which recognizes gesture commands captured from motion sensing input device and drives the action of robots. For compatibility, a general hardware interface layer was also developed in the framework. Simulation and physical experiments have been conducted for preliminary validation. The results have shown that the proposed framework is an effective approach for general robotic manipulation with motion sensing control.

Intelligent Switching Control of Pneumatic Artificial Muscle Manipulator

Science.gov (United States)

Ahn, Kyoung Kwan; Thanh, Tu Diep Cong; Ahn, Young Kong

Problems with the control, oscillatory motion and compliance of pneumatic systems have prevented their widespread use in advanced robotics. However, their compactness, power/weight ratio, ease of maintenance and inherent safety are the factors that could potentially be exploited in sophisticated dexterous manipulator designs. These advantages have led to the development of novel actuators such as the McKibben Muscle, Rubber Actuator and Pneumatic Artificial Muscle Manipulators. However, some limitations still exist, such as deterioration of the performance of transient response due to the change of the external inertia load in the pneumatic artificial muscle manipulator. To overcome this problem, switching algorithm of control parameter using learning vector quantization neural network (LVQNN) is newly proposed, which estimates the external inertia load of the pneumatic artificial muscle manipulator. The effectiveness of the proposed control algorithm is demonstrated through experiments with different external inertia loads.

Predictors of Host Specificity among Behavior-Manipulating Parasites

DEFF Research Database (Denmark)

Fredensborg, B. L.

2014-01-01

specifically, hosts’ behavioral modification that involves interaction with the central nervous system presumably restricts parasites to more closely related hosts than does manipulation of the host’s behavior via debilitation of the host’s physiology. The results of the analysis suggest that phylogenetic......-specialist that has a restricted ecological niche that it masters. Parasites that manipulate hosts’ behavior are often thought to represent resource-specialists based on a few spectacular examples of manipulation of the host’s behavior. However, the determinants of which, and how many, hosts a manipulating parasite...... of parasites and hosts. Using individual and multivariate analyses, I examined the effect of the host’s and parasite’s taxonomy, location of the parasite in the host, type of behavioral change, and the effect of debilitation on host-specificity, measured as the mean taxonomic relatedness of hosts...

Manipulation of single neutral atoms in optical lattices

International Nuclear Information System (INIS)

Zhang Chuanwei; Das Sarma, S.; Rolston, S. L.

2006-01-01

We analyze a scheme to manipulate quantum states of neutral atoms at individual sites of optical lattices using focused laser beams. Spatial distributions of focused laser intensities induce position-dependent energy shifts of hyperfine states, which, combined with microwave radiation, allow selective manipulation of quantum states of individual target atoms. We show that various errors in the manipulation process are suppressed below 10 -4 with properly chosen microwave pulse sequences and laser parameters. A similar idea is also applied to measure quantum states of single atoms in optical lattices

A narrative review of massage and spinal manipulation in the treatment of low back pain

Directory of Open Access Journals (Sweden)

Nurhanisah Sejari

2014-01-01

Full Text Available Low back pain (LBP is one of the most common musculoskeletal problems that affect patients′ daily life. Nowadays, treatment of LBP is very challenging due to the recurrent nature of the problem. This narrative review focuses on massage and spinal manipulation on LBP condition. The other issues consist of epidemiology, etiology, symptoms, and rapport between clinician and patient on treatment were explored. Online electronic search in databases (Ovid TM , Scopus, EMBASE and PubMed was performed using key words such as LBP, massage, and spinal manipulation. Textbooks and web page are additional sources that were used for gathering information. Literature reported that high incidence of LBP in agriculture areas which is farmer, in the urban area mainly office worker and industrial area mainly factory operator. LBP frequently occurs among office workers, pregnant, and obesity due to poor body mechanics. Building a successful rapport is a single most important factor in a relationship between clinician and patient. Understanding patient′s perspective in their illness such as belief about cause, treatment approaches, and quality-of-life will help clinician create plans that are more appropriate to patient′s situation and preferences. Patient′s trust is the easing way for the clinician to provide treatments. Based on current evidence, there are arrays of conservative treatments shown to be effective in treating LBP. However, massage and spinal manipulation are the most popular among LBP patients because it contributes good effect in reducing pain intensity. Massage preferred by certain patient such as traditional Malay massage, Thai massage, Tui Na because it provide a relaxation on the body. In addition, spinal manipulation also showed a positive outcome on pain reduction and joint hypomobility. LBP is a common problem, and various methods could be used as a treatment. However, traditional massage is fast gaining popularity even in the

Master-slave type manipulator

International Nuclear Information System (INIS)

Haaker, L.W.; Jelatis, D.G.

1979-01-01

Remote control manipulator of the master-slave type for carrying out work on the other side of a shield wall. This appliance allows a Y movement relative displacement, the function of which is to extend the range of the manipulator towards the front and also to facilitate its installation, the lateral rotation or inclination of the slave arm in relation to the master arm, and the Z movement extension through which the length of the slave arm is increased in comparison with that of the master arm. Devices have been developed which transform the linear movements into rotational movements to enable these movements to be transmitted through rotational seal fittings capable of ensuring the safety of the separation between the operator's environment and that in the work area. Particular improvements have been made to the handles, handle seals, pincer mechanisms, etc [fr

Nuclear telerobotics and 3-D TV - new tools for the industry

International Nuclear Information System (INIS)

Abel, E.; Watson, C.

1990-01-01

The remote handling and robotics group at Harwell Laboratory has, over the last five years, developed telerobotic techniques for use in the nuclear industry. The approach has been to apply available equipment, modify available equipment, or design and build anew. Three particular systems are described: the nuclear engineered advanced telerobot (Neater); the hydraulic manipulator; and the radiation-tolerant stereo TV. (author)

Adaptive hidden Markov model with anomaly States for price manipulation detection.

Science.gov (United States)

Cao, Yi; Li, Yuhua; Coleman, Sonya; Belatreche, Ammar; McGinnity, Thomas Martin

2015-02-01

Price manipulation refers to the activities of those traders who use carefully designed trading behaviors to manually push up or down the underlying equity prices for making profits. With increasing volumes and frequency of trading, price manipulation can be extremely damaging to the proper functioning and integrity of capital markets. The existing literature focuses on either empirical studies of market abuse cases or analysis of particular manipulation types based on certain assumptions. Effective approaches for analyzing and detecting price manipulation in real time are yet to be developed. This paper proposes a novel approach, called adaptive hidden Markov model with anomaly states (AHMMAS) for modeling and detecting price manipulation activities. Together with wavelet transformations and gradients as the feature extraction methods, the AHMMAS model caters to price manipulation detection and basic manipulation type recognition. The evaluation experiments conducted on seven stock tick data from NASDAQ and the London Stock Exchange and 10 simulated stock prices by stochastic differential equation show that the proposed AHMMAS model can effectively detect price manipulation patterns and outperforms the selected benchmark models.

Development of a Control System for PRIDE Remote Servo-manipulator

International Nuclear Information System (INIS)

Lee, Jong Kwang; Park, Byung Suk; Lee, Hyo Jik; Kim, Kyung Tae; Kim, Sung Hyun; Park, Hee Sung; Kim, Young Hwan; Jung, Jae Hoo; Kim, Ki Ho; Kim, Ho Dong

2009-12-01

KAERI is developing the PRIDE(PyRoprocess Integrated inactive DEmonstration) facility to verify the integrated performance of full Pyroprocess flow. A main process cell in the PRIDE facility will be filled with argon gas which prohibits direct access by human operators. Therefore, all the operation and maintenance of the process equipment is performed remotely through a master-slave manipulation. This research focuses on the design, fabrication, and interface of a control system which integrates several hardware systems such as a dual arm master-slave servo-manipulator, a horizontally moving transporter for a master manipulator, a bridge transporter for a slave manipulator, a chain hoist, camera systems and their display system, a manual console, and a pendant, etc. Also, a bilateral force-reflection controller considering an elasticity and vibration modes of wire cable has been developed for master-slave remote manipulation. The results obtained in this study will be applied for the force-reflection control of the bridge-transported master-slave servo-manipulator system for use in the PRIDE facility. Since this research is an essential work in robotics related fields, the results would be widely used for developing power manipulators and process automation equipment

Development of a Control System for PRIDE Remote Servo-manipulator

Energy Technology Data Exchange (ETDEWEB)

Lee, Jong Kwang; Park, Byung Suk; Lee, Hyo Jik; Kim, Kyung Tae; Kim, Sung Hyun; Park, Hee Sung; Kim, Young Hwan; Jung, Jae Hoo; Kim, Ki Ho; Kim, Ho Dong

2009-12-15

KAERI is developing the PRIDE(PyRoprocess Integrated inactive DEmonstration) facility to verify the integrated performance of full Pyroprocess flow. A main process cell in the PRIDE facility will be filled with argon gas which prohibits direct access by human operators. Therefore, all the operation and maintenance of the process equipment is performed remotely through a master-slave manipulation. This research focuses on the design, fabrication, and interface of a control system which integrates several hardware systems such as a dual arm master-slave servo-manipulator, a horizontally moving transporter for a master manipulator, a bridge transporter for a slave manipulator, a chain hoist, camera systems and their display system, a manual console, and a pendant, etc. Also, a bilateral force-reflection controller considering an elasticity and vibration modes of wire cable has been developed for master-slave remote manipulation. The results obtained in this study will be applied for the force-reflection control of the bridge-transported master-slave servo-manipulator system for use in the PRIDE facility. Since this research is an essential work in robotics related fields, the results would be widely used for developing power manipulators and process automation equipment.

PSA use in accident management studies in Japan

International Nuclear Information System (INIS)

Hirano, Mitsumasa

1994-01-01

The safety of NPPs in Japan is secured by stringent safety regulations based on the deterministic method, minimizing the possibility a severe accident to a technologically negligible level. PSA is not required in the current regulatory procedures. Accident management based on PSA is a 'knowledge-based' action dependent on utilities' technical knowledge aimed at further reduction of the risk which is kept small enough by existing measures. The paper discusses the following three kinds of PSAs that have been conducted practically and efficiently on NPPs to provide supplemental information about their safety characteristics in addition to the deterministic evaluation used in the regulatory safety review: PSAs on typical NPPs, PSAs on all NPPs to examine candidates for accident management, and PSAs as part of periodic safety review (PSR). 1 fig., 5 tabs

Oxytocin increases the influence of public service advertisements.

Directory of Open Access Journals (Sweden)

Pei-Ying Lin

Full Text Available This paper presents a neurophysiologic model of effective public service advertisements (PSAs and reports two experiments that test the model. In Experiment 1, we show that after watching 16 PSAs participants who received oxytocin, compared to those given a placebo, donated to 57% more causes, donated 56% more money, and reported 17% greater concern for those in the ads. In Experiment 2, we measured adrenocorticotropin hormone (ACTH and oxytocin levels in blood before and after participants watched a PSA. As predicted by the model, donations occurred when participants had increases in both ACTH and oxytocin. Our results indicate that PSAs with social content that cause OT release will be more effective than those that do not. Our results also explain why some individuals do not respond to PSAs.

Oxytocin increases the influence of public service advertisements.

Science.gov (United States)

Lin, Pei-Ying; Grewal, Naomi Sparks; Morin, Christophe; Johnson, Walter D; Zak, Paul J

2013-01-01

This paper presents a neurophysiologic model of effective public service advertisements (PSAs) and reports two experiments that test the model. In Experiment 1, we show that after watching 16 PSAs participants who received oxytocin, compared to those given a placebo, donated to 57% more causes, donated 56% more money, and reported 17% greater concern for those in the ads. In Experiment 2, we measured adrenocorticotropin hormone (ACTH) and oxytocin levels in blood before and after participants watched a PSA. As predicted by the model, donations occurred when participants had increases in both ACTH and oxytocin. Our results indicate that PSAs with social content that cause OT release will be more effective than those that do not. Our results also explain why some individuals do not respond to PSAs.

Exploitation of manipulators: 'hitch-hiking' as a parasite transmission strategy.

Science.gov (United States)

Thomas; Renaud; Poulin

1998-07-01

For many parasites with complex life cycles, manipulation of host behaviour is an adaptation to increase the probability of successful transmission. Since manipulation is likely to be costly, other parasites may exploit hosts already manipulated so as to ensure their transmission without investing in manipulation. Such a cheating strategy, called 'hitch-hiking', could be adaptive in a range of situations. We first propose and discuss criteria that should be met by any parasite to be considered a hitch-hiker. Then, to understand the evolution of the hitch-hiking strategy, we use simple mathematical models to analyse the influence of several variables on the potential benefits for a nonmanipulative parasite of actively seeking a ride to the definitive host with a manipulative parasite. The models suggest that the prevalence or abundance of manipulative parasites will be a key determinant of whether hitch-hiking can be an advantageous option for other parasites. Copyright 1998 The Association for the Study of Animal Behaviour.

Application of a Perturbation Method for Realistic Dynamic Simulation of Industrial Robots

International Nuclear Information System (INIS)

Waiboer, R. R.; Aarts, R. G. K. M.; Jonker, J. B.

2005-01-01

This paper presents the application of a perturbation method for the closed-loop dynamic simulation of a rigid-link manipulator with joint friction. In this method the perturbed motion of the manipulator is modelled as a first-order perturbation of the nominal manipulator motion. A non-linear finite element method is used to formulate the dynamic equations of the manipulator mechanism. In a closed-loop simulation the driving torques are generated by the control system. Friction torques at the actuator joints are introduced at the stage of perturbed dynamics. For a mathematical model of the friction torques we implemented the LuGre friction model that accounts both for the sliding and pre-sliding regime. To illustrate the method, the motion of a six-axes industrial Staeubli robot is simulated. The manipulation task implies transferring a laser spot along a straight line with a trapezoidal velocity profile. The computed trajectory tracking errors are compared with measured values, where in both cases the tip position is computed from the joint angles using a nominal kinematic robot model. It is found that a closed-loop simulation using a non-linear finite element model of this robot is very time-consuming due to the small time step of the discrete controller. Using the perturbation method with the linearised model a substantial reduction of the computer time is achieved without loss of accuracy

Data manipulation with R

CERN Document Server

Abedin, Jaynal

2015-01-01

This book is for all those who wish to learn about data manipulation from scratch and excel at aggregating data effectively. It is expected that you have basic knowledge of R and have previously done some basic administration work with R.

The effects of spatially displaced visual feedback on remote manipulator performance

Science.gov (United States)

Smith, Randy L.; Stuart, Mark A.

1993-01-01

The results of this evaluation have important implications for the arrangement of remote manipulation worksites and the design of workstations for telerobot operations. This study clearly illustrates the deleterious effects that can accompany the performance of remote manipulator tasks when viewing conditions are less than optimal. Future evaluations should emphasize telerobot camera locations and the use of image/graphical enhancement techniques in an attempt to lessen the adverse effects of displaced visual feedback. An important finding in this evaluation is the extent to which results from previously performed direct manipulation studies can be generalized to remote manipulation studies. Even though the results obtained were very similar to those of the direct manipulation evaluations, there were differences as well. This evaluation has demonstrated that generalizations to remote manipulation applications based upon the results of direct manipulation studies are quite useful, but they should be made cautiously.

Design and realization of sort manipulator of crystal-angle sort machine

Science.gov (United States)

Wang, Ming-shun; Chen, Shu-ping; Guan, Shou-ping; Zhang, Yao-wei

2005-12-01

It is a current tendency of development in automation technology to replace manpower with manipulators in working places where dangerous, harmful, heavy or repetitive work is involved. The sort manipulator is installed in a crystal-angle sort machine to take the place of manpower, and engaged in unloading and sorting work. It is the outcome of combing together mechanism, electric transmission, and pneumatic element and micro-controller control. The step motor makes the sort manipulator operate precisely. The pneumatic elements make the sort manipulator be cleverer. Micro-controller's software bestows some simple artificial intelligence on the sort manipulator, so that it can precisely repeat its unloading and sorting work. The combination of manipulator's zero position and step motor counting control puts an end to accumulating error in long time operation. A sort manipulator's design in the practice engineering has been proved to be correct and reliable.

Detailed solution to a complex kinematics chain manipulator

International Nuclear Information System (INIS)

March-Leuba, S.; Jansen, J.F.; Kress, R.L.; Babcock, S.M.

1992-01-01

This paper presents a relatively simple method based on planar geometry to analyze the inverse kinematics for closed kinematics chain (CKC) mechanisms. Although the general problem and method of approach are well defined, the study of the inverse kinematics of a closed-chain mechanism is a very complicated one. The current methodology allows closed-form solutions to be found, if a solution exists, for the displacements and velocities of all manipulator joints. Critical design parameters can be identified and optimized by using symbolic models. This paper will focus on planar closed-chain structures extended with a rotational base. However, with open and CKC mechanisms combined in different planes, the extension to the case is straightforward. Further, real-time algorithms are developed that can be handled by existing microprocessor technology. To clarify the methodology, the Soldier Robot Interface Project (SRIP) manipulator is analyzed, and a graphic simulation is presented as a verification of the results. This manipulator has 17 links, 24 one-degree-of-freedom (DOF) joints, and 7 CKC loops working in a plane and a rotational base, which determine its 3 DOFs. The SRIP manipulator allows a decoupled linear motion along the vertical or horizontal directions using only one of its linear actuators. The symbolic solution for the inverse kinematics allows optimization to be performed to further decouple the Cartesian motions by changing link lengths of the manipulator. The conclusion achieved by the optimization is that only two link lengths need to be changed to tune the manipulator for a perfect decoupling at each area of the workspace

Computer control of ET-RR-1 hot cell manipulators

International Nuclear Information System (INIS)

Effat, A.M.; Rahman, F.A.

1990-01-01

The hot cell designed for remote handling of radioactive materials are, in effect, integral systems of safety devices for attaining adequate radiological protection for the operating personnel. Their operation involve potential hazards that are sometimes of great magnitude. The effect of an incident or accident could thus be fatal. some of these incident are due to the collision of the manipulator slave side with the radioactive objectives. Therefore in order to minimize the probability of such type of incidents, the movement of the manipulators is suggested (in the present investigation) to be kept under computer control. A model have been developed to control the movement of the hot cell manipulators in the slave side for Egypt first research reactor ET-RR-1, specially in the hidden sectors. The model is based on the use of a microprocessor and some accessories fixed to the manipulators slave side in a special manner such that it prevents the manipulator from colliding with radioactive objects. This is achieved by a signal transmitted to a specially designed brake which controls the movement of the upper arm of the manipulator master side. The hardware design of the model as well as the software are presented in details

Dynamic modeling of the manipulator RD5NT

Directory of Open Access Journals (Sweden)

Eduardo Monteiro Aguiar

2015-05-01

Full Text Available This article presents the development of a dynamicmathematical model for the DIDACTA ITALIARD5NT manipulator. The model is intendedto be used in the development of strategies ofposition-trajectory control. The choice modelingtype aims at identifying the physical parametersof the manipulator.

Manipulating electromagnetic waves with metamaterials: Concept and microwave realizations

International Nuclear Information System (INIS)

He Qiong; Xiao Shi-Yi; Li Xin; Song Zheng-Yong; Sun Wu-Jiong; Zhou Lei; Sun Shu-Lin

2014-01-01

Our recent efforts in manipulating electromagnetic (EM) waves using metamaterials (MTMs) are reviewed with emphasis on 1) manipulating wave polarization and transporting properties using homogeneous MTMs, 2) manipulating surface-wave properties using plasmonic MTMs, and 3) bridging propagating and surface waves using inhomogeneous meta-surfaces. For all these topics, we first illustrate the physical concepts and then present several typical practical realizations and applications in the microwave regime. (topical review - plasmonics and metamaterials)

Development of one body α-γ type manipulator for hot cell facility

International Nuclear Information System (INIS)

Jung, S. K.; Lee, S. B.; Lee, E. P.

2004-01-01

To handle the high level radioactive materials in a sealed type hot cell, our company has developed the one body alpha-gamma type manipulator and this is an improved model compared with the previously developed beta-gamma and separated alpha-gamma type manipulators. The successful development of one body alpha-gamma type manipulator means our company has a whole capacity to design and fabricate all kinds of manipulators using in hot cells. Until now most of the manipulators in Korea were imported from other countries. The development of Korean manipulators gives us the easier maintenance and lower price compared to the foreign products. It is also possible to export the Korean manipulators to overseas

An Evaluation of Camera Pose Methods for an Augmented Reality System: Application to Teaching Industrial Robots

OpenAIRE

Maidi , Madjid; Mallem , Malik; Benchikh , Laredj; Otmane , Samir

2013-01-01

International audience; In automotive industry, industrial robots are widely used in production lines for many tasks such as welding, painting or assembly. Their use requires, from users, both a good manipulation and robot control. Recently, new tools have been developed to realize fast and accurate trajectories in many production sectors by using the real prototype of vehicle or a generalized design within a virtual simulation platform. However, many issues could be considered in these cases...

Billing and coding for osteopathic manipulative treatment.

Science.gov (United States)

Snider, Karen T; Jorgensen, Douglas J

2009-08-01

Some osteopathic physicians are not properly reimbursed by insurance companies after providing osteopathic manipulative treatment (OMT) to their patients. Common problems associated with lack of reimbursements include insurers bundling OMT with the standard evaluation and management service and confusing OMT with chiropractic manipulative treatment or physical therapy services. The authors suggest methods of appeal for denied reimbursement claims that will also prevent future payment denials.

Force-feedback tele operation of industrial robots a cost effective solution for decontamination of nuclear plants

International Nuclear Information System (INIS)

Desbats, P.; Andriot, C.; Gicquel, P.; Viallesoubranne, J.P.; Souche, C.

1998-01-01

Decontamination and maintenance in hot cells are some new emerging applications of industrial robots in the nuclear fuel cycle plants. Industrial robots are low cost, accurate and reliable manipulator arms which are used in manufacturing industries usually. Thanks to the recent evolution of robotics technologies, some industrial robots may be adapted to nuclear environment. These robots are transportable, sealed and can be decontaminated, and they may be 'hardened' up to a level of irradiation dose sufficient for operation in low and medium irradiating/contaminating environments. Although industrial robots are usually programmed to perform specific and repetitive tasks, they may be remotely tele-operated by human operators as well. This allows industrial robots to perform usual tele-manipulation tasks encountered in the nuclear plants and more. The paper presents the computer based tele-operation control system TAO2000 TM , developed by the Tele-operation and Robotics Service of CEA, which has been applied to the RX90 TM industrial robot from ST-UBLI company. This robot has been selected in order to perform various maintenance and decontamination tasks in COGEMA plants. TAO2000 provides the overall tele-robotic and robotic functions necessary to perform any remote tele-operation application in hostile environment: force-feedback master-slave control; computer- assisted tele-operation of mechanical processes; trajectory programming as well as various robotics functions; graphical modelling of working environment and simulation; automatic path planning with obstacle avoidance; man-machine interface for tasks programming and mission execution. Experimental results reported in the paper demonstrate the feasibility of force-feedback master-slave control of standard industrial robots. Finally, the design of new, cost effective. tele-operation systems based on industrial robots may be intended for nuclear plants maintenance. (author)

High degree-of-freedom dynamic manipulation

Science.gov (United States)

Murphy, Michael P.; Stephens, Benjamin; Abe, Yeuhi; Rizzi, Alfred A.

2012-06-01

The creation of high degree of freedom dynamic mobile manipulation techniques and behaviors will allow robots to accomplish difficult tasks in the field. We are investigating the use of the body and legs of legged robots to improve the strength, velocity, and workspace of an integrated manipulator to accomplish dynamic manipulation. This is an especially challenging task, as all of the degrees of freedom are active at all times, the dynamic forces generated are high, and the legged system must maintain robust balance throughout the duration of the tasks. To accomplish this goal, we are utilizing trajectory optimization techniques to generate feasible open-loop behaviors for our 28 dof quadruped robot (BigDog) by planning the trajectories in a 13 dimensional space. Covariance Matrix Adaptation techniques are utilized to optimize for several criteria such as payload capability and task completion speed while also obeying constraints such as torque and velocity limits, kinematic limits, and center of pressure location. These open-loop behaviors are then used to generate feed-forward terms, which are subsequently used online to improve tracking and maintain low controller gains. Some initial results on one of our existing balancing quadruped robots with an additional human-arm-like manipulator are demonstrated on robot hardware, including dynamic lifting and throwing of heavy objects 16.5kg cinder blocks, using motions that resemble a human athlete more than typical robotic motions. Increased payload capacity is accomplished through coordinated body motion.

Planning Robotic Manipulation Strategies for Sliding Objects

Science.gov (United States)

Peshkin, Michael A.

Automated planning of grasping or manipulation requires an understanding of both the physics and the geometry of manipulation, and a representation of that knowledge which facilitates the search for successful strategies. We consider manipulation on a level conveyor belt or tabletop, on which a part may slide when touched by a robot. Manipulation plans for a given part must succeed in the face of two types of uncertainty: that of the details of surfaces in contact, and that of the initial configuration of the part. In general the points of contact between the part and the surface it slides on will be unknown, so the motion of the part in response to a push cannot be predicted exactly. Using a simple variational principle (which is derived), we find the set of possible motions of a part for a given push, for all collections of points of contact. The answer emerges as a locus of centers of rotation (CORs). Manipulation plans made using this locus will succeed despite unknown details of contact. Results of experimental tests of the COR loci are presented. Uncertainty in the initial configuration of a part is usually also present. To plan in the presence of uncertainty, configuration maps are defined, which map all configurations of a part before an elementary operation to all possible outcomes, thus encapsulating the physics and geometry of the operation. The configuration map for an operation sequence is a product of configuration maps of elementary operations. Using COR loci we compute configuration maps for elementary sliding operations. Appropriate search techniques are applied to find operation sequences which succeed in the presence of uncertainty in the initial configuration and unknown details of contact. Such operation sequences may be used as parts feeder designs or as manipulation or grasping strategies for robots. As an example we demonstrate the automated design of a class of passive parts feeders consisting of multiple sequential fences across a conveyor

Fiscal 1997 R an D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules (high-efficiency and analysis and manipulation technology for DNA); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (DNA nado kokoritsu kaiseki sosa gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). Through the observation of super spiral DNA fixed on a spermin or spermidine treated mica substrate by AFM (atomic force microscope), fixation of DNA without any deformation in solution was clarified, and visualization of the spiral structure of DNA were successfully achieved. Manipulation of Xe atoms adsorbed on an Si(111) surface was certainly possible by using STM (scanning tunneling microscope)/atom probe equipment. A nucleation mechanism in crystal growth was studied for various organic source-molecules/GaAs(001) surface systems, and formation of high-density nuclei on the GaAs surface was achieved by accelerating the translational energy of Ga material molecules up to 6eV or more. Ziegler- Natta catalysis important for industrial polymerization of olefin molecules was precisely analyzed by first-principle dynamic simulation. A large-scale simulation of zeolite catalyst is also in promotion for methanol to gasoline conversion. 51 refs., 87 figs., 7 tabs.

Manipulation of microfluidic droplets by electrorheological fluid

KAUST Repository

Zhang, Menying

2009-09-01

Microfluidics, especially droplet microfluidics, attracts more and more researchers from diverse fields, because it requires fewer materials and less time, produces less waste and has the potential of highly integrated and computer-controlled reaction processes for chemistry and biology. Electrorheological fluid, especially giant electrorheological fluid (GERF), which is considered as a kind of smart material, has been applied to the microfluidic systems to achieve active and precise control of fluid by electrical signal. In this review article, we will introduce recent results of microfluidic droplet manipulation, GERF and some pertinent achievements by introducing GERF into microfluidic system: digital generation, manipulation of "smart droplets" and droplet manipulation by GERF. Once it is combined with real-time detection, integrated chip with multiple functions can be realized. © 2009 Wiley-VCH Verlag GmbH & Co. KGaA.

Drugs + HIV, Learn the Link

Medline Plus

Full Text Available ... print PSAs, Web banner PSAs, promo cards, and posters. Videos The campaign includes the "After the Party" ... d’cisions” Videos Campaign Materials After the Party Posters: We have developed posters with our campaign tagline ...

Drugs + HIV, Learn the Link

Medline Plus

Full Text Available ... Abused Drugs Charts Emerging Trends and Alerts Alcohol Club Drugs Cocaine Fentanyl Hallucinogens Inhalants Heroin Marijuana MDMA ( ... materials include print PSAs, Web banner PSAs, promo cards, and posters. Videos The campaign includes the "After ...

Female directors and real activities manipulation: Evidence from China

Directory of Open Access Journals (Sweden)

Jin-hui Luo

2017-06-01

Full Text Available Unlike previous studies that focus on accrual-based earnings management, this study analyzes real activities manipulation and investigates whether female directors on boards of directors (BoDs affect managers’ real activities manipulation. Using a large sample of 11,831 firm-year observations from Chinese listed companies from the 2000 to 2011 period, we find that higher female participation on BoDs is associated with lower levels of real activities manipulation, and that this negative relationship is stronger when female directors have higher ownership. These results hold for a battery of robustness checks. Overall, our findings indicate that board gender diversity may serve as a substitute mechanism for corporate governance to curb real activities manipulation and thus provide interested stakeholders with higher quality earnings reports.

Robotic design analysis based on teleoperated manipulator data collection

International Nuclear Information System (INIS)

Stoughton, R.S.; Martin, H.L.

1985-01-01

Extensive data collection was performed on a servomanipulator system (TeleOperator Systems SM-229) to determine the motion range and mechanical power usage of the manipulator under direct human control. More than 50 hours of various manipulation operations were performed while joint positions and motor currents were recorded. Reduction of these data yielded histograms of the manipulator usage patterns revealing areas where future manipulator motion ranges and drive systems could be optimized. This report develops a graphical representation of mechanical power usage that relates torque and velocity to the total usage time. Methods of interpreting this representation are discussed and generalized for use in analyzing robotic systems. The resulting technique will allow designers to reevaluate an operating system and determine how to improve that system's design

Strategic marketing in the UK tobacco industry.

Science.gov (United States)

Anderson, Susan; Hastings, Gerard; MacFadyen, Lynn

2002-08-01

Tobacco-industry marketing has played a central part in the global spread of tobacco use and addiction. Although the absolute size of the tobacco market has dwindled, the industry is still immensely successful, largely due to sophisticated and manipulative marketing strategies. The UK tobacco industry identifies target groups and builds enduring relationships based on careful brand management. Potential customers are exposed to brands which are likely to appeal to them most. Tobacco companies tailor their products to target markets by altering the content of tar and nicotine, and by adding flavourings to produce a distinctive taste. Marketing strategies ensure that the products are promoted heavily at the point of sale, and directed advertising and sponsorship agreements are used to increase the visibility of the brand and strengthen its image. Tobacco companies also target non-consumer organisations such as retailers and policy makers with the aim of creating the best possible business environment for tobacco sales. We review published evidence, internal-advertising-agency documents, and observational data about tobacco promotion, and discuss the use of targeted marketing strategies in the UK.

Dual arm master controller for a bilateral servo-manipulator

Science.gov (United States)

Kuban, Daniel P.; Perkins, Gerald S.

1989-01-01

A master controller for a mechanically dissimilar bilateral slave servo-manipulator is disclosed. The master controller includes a plurality of drive trains comprising a plurality of sheave arrangements and cables for controlling upper and lower degrees of master movement. The cables and sheaves of the master controller are arranged to effect kinematic duplication of the slave servo-manipulator, despite mechanical differences therebetween. A method for kinematically matching a master controller to a slave servo-manipulator is also disclosed.

Review conclusions by Ernst and Canter regarding spinal manipulation refuted

Directory of Open Access Journals (Sweden)

Evans Roni

2006-08-01

Full Text Available Abstract In the April 2006 issue of the Journal of Royal Society of Medicine, Ernst and Canter authored a review of the most recent systematic reviews on the effectiveness of spinal manipulation for any condition. The authors concluded that, except for back pain, spinal manipulation is not an effective intervention for any condition and, because of potential side effects, cannot be recommended for use at all in clinical practice. Based on a critical appraisal of their review, the authors of this commentary seriously challenge the conclusions by Ernst and Canter, who did not adhere to standard systematic review methodology, thus threatening the validity of their conclusions. There was no systematic assessment of the literature pertaining to the hazards of manipulation, including comparison to other therapies. Hence, their claim that the risks of manipulation outweigh the benefits, and thus spinal manipulation cannot be recommended as treatment for any condition, was not supported by the data analyzed. Their conclusions are misleading and not based on evidence that allow discrediting of a large body of professionals using spinal manipulation.

Environmental manipulation for edible insect procurement: a historical perspective

Science.gov (United States)

2012-01-01

Throughout history humans have manipulated their natural environment for an increased predictability and availability of plant and animal resources. Research on prehistoric diets increasingly includes small game, but edible insects receive minimal attention. Using the anthropological and archaeological literature we show and hypothesize about the existence of such environmental manipulations related to the procurement of edible insects. As examples we use eggs of aquatic Hemiptera in Mexico which are semi-cultivated by water management and by providing egg laying sites; palm weevil larvae in the Amazon Basin, tropical Africa, and New Guinea of which the collection is facilitated by manipulating host tree distribution and abundance and which are semi-cultivated by deliberately cutting palm trees at a chosen time at a chosen location; and arboreal, foliage consuming caterpillars in sub-Saharan Africa for which the collection is facilitated by manipulating host tree distribution and abundance, shifting cultivation, fire regimes, host tree preservation, and manually introducing caterpillars to a designated area. These manipulations improve insect exploitation by increasing their predictability and availability, and most likely have an ancient origin. PMID:22264307

Environmental manipulation for edible insect procurement: a historical perspective.

Science.gov (United States)

Van Itterbeeck, Joost; van Huis, Arnold

2012-01-21

Throughout history humans have manipulated their natural environment for an increased predictability and availability of plant and animal resources. Research on prehistoric diets increasingly includes small game, but edible insects receive minimal attention. Using the anthropological and archaeological literature we show and hypothesize about the existence of such environmental manipulations related to the procurement of edible insects. As examples we use eggs of aquatic Hemiptera in Mexico which are semi-cultivated by water management and by providing egg laying sites; palm weevil larvae in the Amazon Basin, tropical Africa, and New Guinea of which the collection is facilitated by manipulating host tree distribution and abundance and which are semi-cultivated by deliberately cutting palm trees at a chosen time at a chosen location; and arboreal, foliage consuming caterpillars in sub-Saharan Africa for which the collection is facilitated by manipulating host tree distribution and abundance, shifting cultivation, fire regimes, host tree preservation, and manually introducing caterpillars to a designated area. These manipulations improve insect exploitation by increasing their predictability and availability, and most likely have an ancient origin.

Environmental manipulation for edible insect procurement: a historical perspective

Directory of Open Access Journals (Sweden)

Van Itterbeeck Joost

2012-01-01

Full Text Available Abstract Throughout history humans have manipulated their natural environment for an increased predictability and availability of plant and animal resources. Research on prehistoric diets increasingly includes small game, but edible insects receive minimal attention. Using the anthropological and archaeological literature we show and hypothesize about the existence of such environmental manipulations related to the procurement of edible insects. As examples we use eggs of aquatic Hemiptera in Mexico which are semi-cultivated by water management and by providing egg laying sites; palm weevil larvae in the Amazon Basin, tropical Africa, and New Guinea of which the collection is facilitated by manipulating host tree distribution and abundance and which are semi-cultivated by deliberately cutting palm trees at a chosen time at a chosen location; and arboreal, foliage consuming caterpillars in sub-Saharan Africa for which the collection is facilitated by manipulating host tree distribution and abundance, shifting cultivation, fire regimes, host tree preservation, and manually introducing caterpillars to a designated area. These manipulations improve insect exploitation by increasing their predictability and availability, and most likely have an ancient origin.

A review of national television PSA campaigns for preventing alcohol-impaired driving, 1987-1992.

Science.gov (United States)

DeJong, W; Atkin, C K

1995-01-01

We present a content analysis of 137 public service announcements (PSAs) focused on alcohol-impaired driving that aired nationally on U.S. television between 1987 and 1992. Our findings include the following: 1) Most PSAs were intended to reach an undifferentiated general audience, not necessarily those who are at greatest risk for driving after drinking. 2) Most PSAs were designed to create awareness of the problem of alcohol-impaired driving or to promote individual behavior change. 3) More PSAs were developed on the use of designated drivers than on any other subject. 4) About two-thirds of the PSAs included one or more celebrities who speak directly to the audience. Past media campaigns have tended to ignore the fact that people's behavior is profoundly shaped by their environment, which in turn is shaped by public policy. We recommend that future mass media campaigns against alcohol-impaired driving focus on building support for changes in institutional structures, public policy or law that will motivate, support, and sustain the efforts of individuals to alter their behavior. Television PSAs can play an important but somewhat limited role in support of this effort. Greater emphasis will need to be given instead to media advocacy strategies, including paid radio advertising. We further recommend that the principal organizations concerned about alcohol-impaired driving share their plans and develop a common communications strategy that will advance the public policy agenda proposed by the Surgeon General's Workshop on Drunk Driving.

An overview of the Accident Response Mobile Manipulation System (ARMMS)

International Nuclear Information System (INIS)

Morse, W.D.; Hayward, D.R.; Jones, D.P.; Sanchez, A.; Shirey, D.L.

1993-01-01

The development of a high mobility platform integrated with high strength manipulation is under development at Sandia National Laboratories. The mobility platform used is a High Mobility Multipurpose Wheeled Vehicle (HMMWV). Manipulation is provided by two Titan 7F Schilling manipulators integrated onboard the HMMWV. The current state of development is described and future plans are discussed

Electrostatic Transport and Manipulation of Lunar Soil and Dust

International Nuclear Information System (INIS)

Kawamoto, Hiroyuki

2008-01-01

Transport and manipulation technologies of lunar soil and dust are under development utilizing the electrostatic force. Transport of particles is realized by an electrostatic conveyer consisting of parallel electrodes. Four-phase traveling electrostatic wave was applied to the electrodes to transport particles upon the conveyer and it was demonstrated that particles were efficiently transported under conditions of low frequency, high voltage, and the application of rectangular wave. Not only linear but also curved and closed transport was demonstrated. Numerical investigation was carried out with a three-dimensional hard-sphere model of the Distinct Element Method to clarify the mechanism of the transport and to predict performances in the lunar environment. This technology is expected to be utilized not only for the transport of bulk soil but also for the cleaning of a solar panel and an optical lens. Another technology is an electrostatic manipulation system to manipulate single particle. A manipulator consisted of two parallel pin electrodes. When voltage was applied between the electrodes, electrophoresis force generated in non-uniform electrostatic field was applied to the particle near the tip of the electrode. The particle was captured by the application of the voltage and released from the manipulator by turning off the voltage. It was possible to manipulate not only insulative but also conductive particles. Three-dimensional electrostatic field calculation was conducted to calculate the electrophoresis force and the Coulomb force

Manipulation in political stock markets: Preconditions and evidence

OpenAIRE

Hansen, Jan; Schmidt, Carsten; Strobel, Martin

2001-01-01

Political stock markets (PSM) are sometimes seen as substitutes for opinion polls. On the bases of a behavioral model, specific preconditions were drawn out under which manipulation in PSM can weaken this argument. Evidence for manipulation is reported from the data of two separate PSM during the Berlin 99 state elections.

Beliefs in the population about cracking sounds produced during spinal manipulation.

Science.gov (United States)

Demoulin, Christophe; Baeri, Damien; Toussaint, Geoffrey; Cagnie, Barbara; Beernaert, Axel; Kaux, Jean-François; Vanderthommen, Marc

2018-03-01

To examine beliefs about cracking sounds heard during high-velocity low-amplitude (HVLA) thrust spinal manipulation in individuals with and without personal experience of this technique. We included 100 individuals. Among them, 60 had no history of spinal manipulation, including 40 who were asymptomatic with or without a past history of spinal pain and 20 who had nonspecific spinal pain. The remaining 40 patients had a history of spinal manipulation; among them, 20 were asymptomatic and 20 had spinal pain. Participants attended a one-on-one interview during which they completed a questionnaire about their history of spinal manipulation and their beliefs regarding sounds heard during spinal manipulation. Mean age was 43.5±15.4years. The sounds were ascribed to vertebral repositioning by 49% of participants and to friction between two vertebras by 23% of participants; only 9% of participants correctly ascribed the sound to the formation of a gas bubble in the joint. The sound was mistakenly considered to indicate successful spinal manipulation by 40% of participants. No differences in beliefs were found between the groups with and without a history of spinal manipulation. Certain beliefs have documented adverse effects. This study showed a high prevalence of unfounded beliefs regarding spinal manipulation. These beliefs deserve greater attention from healthcare providers, particularly those who practice spinal manipulation. Copyright © 2017 Société française de rhumatologie. Published by Elsevier SAS. All rights reserved.

Combined long reach and dexterous manipulation for waste storage tank applications

International Nuclear Information System (INIS)

Burks, B.L.; Armstrong, G.A.; Butler, P.L.; Boissiere, P.

1991-01-01

One of the highest priority environmental restoration tasks within the Department of Energy (DOE) is the remediation of single-shell waste storage tanks (WSTs), especially those suspected of, or documented as, leakers. Most currently proposed approaches for remediation of large underground WSTs require application of remotely operated long-reach (greater than 10 m), high-lift capacity (greater than 200 kg) manipulator systems. Because of the complexity of in-tank hardware, waste forms, remediation tasks, and variety of end-effector tools, these manipulator systems must also be capable of performing a diverse set of dexterous manipulations. This presentation will describe the integration of a Spar RMS 2500 manipulator system, a Schilling Titan-7F manipulator, and control systems developed at ORNL and SNL to provide a combined long reach and dexterous manipulation system. The purpose of integrating these two manipulator systems was to study and demonstrate their combined performance, evaluate design requirements for a deployed system, and provide a testbed for control and end-effector technologies that might be applicable to remediation of WSTs. 5 refs

Two-probe atomic-force microscope manipulator and its applications

Science.gov (United States)

Zhukov, A. A.; Stolyarov, V. S.; Kononenko, O. V.

2017-06-01

We report on a manipulator based on a two-probe atomic force microscope (AFM) with an individual feedback system for each probe. This manipulator works under an upright optical microscope with 3 mm focal distance. The design of the microscope helps us tomanipulate nanowires using the microscope probes as a two-prong fork. The AFM feedback is realized based on the dynamic full-time contact mode. The applications of the manipulator and advantages of its two-probe design are presented.

Multilink manipulator computer control: experience in development and commissioning

International Nuclear Information System (INIS)

Holt, J.E.

1988-11-01

This report describes development which has been carried out on the multilink manipulator computer control system. The system allows the manipulator to be driven using only two joysticks. The leading link is controlled and the other links follow its path into the reactor, thus avoiding any potential obstacles. The system has been fully commissioned and used with the Sizewell ''A'' reactor 2 Multilink T.V. manipulator. Experience of the use of the system is presented, together with recommendations for future improvements. (author)

Dual arm master controller for a bilateral servo-manipulator

International Nuclear Information System (INIS)

Kuban, D.P.; Perkins, G.S.

1989-01-01

A master controller for a mechanically dissimilar bilateral slave servo-manipulator is disclosed. The master controller includes a plurality of drive trains comprising a plurality of sheave arrangements and cables for controlling upper and lower degrees of master movement. The cables and sheaves of the master controller are arranged to effect kinematic duplication of the slave servo-manipulator, despite mechanical differences there between. A method for kinematically matching a master controller to a slave servo-manipulator is also disclosed. 13 figs

Two-probe atomic-force microscope manipulator and its applications.

Science.gov (United States)

Zhukov, A A; Stolyarov, V S; Kononenko, O V

2017-06-01

We report on a manipulator based on a two-probe atomic force microscope (AFM) with an individual feedback system for each probe. This manipulator works under an upright optical microscope with 3 mm focal distance. The design of the microscope helps us tomanipulate nanowires using the microscope probes as a two-prong fork. The AFM feedback is realized based on the dynamic full-time contact mode. The applications of the manipulator and advantages of its two-probe design are presented.

Actuator Module of Robot Manipulator for Nuclear Power Plants Inspection, Maintenance and Decommission

Energy Technology Data Exchange (ETDEWEB)

Lee, Sung Uk; Jung, Kyung Min; Seo, Young Chil; Choi, Byung Seon; Moon, Jei Kwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

For nuclear facility decommissioning, there are many different electrical manipulators to remotely dismantle a nuclear facility. Various manipulators will be necessary for inspection, maintenance and decommission. Only one manipulator cannot response to many required tasks. Therefore, several manipulators are necessary, depending on the payload capacity, their number of axes and their dexterity. Each manipulator was developed for a specific task. The actuators used at manipulator are varied and many companies sell actuators depending on power, torque and speed. However, the commercial product is not standardized. Therefore, the development of the manipulator is time consuming and expensive. The essential item of the manipulators is the actuator module. If actuator module is standardized, it is easier to develop manipulator. In this paper, we developed two electrical actuator modules to standardize the actuator module and easily develop a manipulator using the proposed actuator modules. The electrical actuator module has a motor, gear and rotary sensor, and is also waterproof. The electrically driven manipulator being used in the proposed actuator modules will be shown. Two modularized electrical actuator modules were developed for inspection, maintenance and decommission. Using the two developed actuator modules, the manipulator inspecting the welding area of reactor vessel is easily developed. Various modularized electrical actuator modules will be developed in terms of size and power.

One Family's Struggles with Pertussis (Whooping Cough)

Medline Plus

Full Text Available ... Flu's Gonna Lose M.O.V.E. newsfeeds PSAs publications infectious disease workshop pediatric hepatitis report someone ... any link to download to your computer. Audio PSAs :30-second branded MP3 :30-second unbranded MP3 : ...

One Family's Struggles with Hepatitis B

Medline Plus

Full Text Available ... Flu's Gonna Lose M.O.V.E. newsfeeds PSAs publications infectious disease workshop pediatric hepatitis report someone ... any link to download to your computer. Audio PSAs :30-second branded MP3 :30-second unbranded MP3 : ...

One Family's Struggle with Chickenpox

Medline Plus

Full Text Available ... Flu's Gonna Lose M.O.V.E. newsfeeds PSAs publications infectious disease workshop pediatric hepatitis report someone ... any link to download to your computer. Audio PSAs :30-second branded MP3 :30-second unbranded MP3 : ...

One Family's Struggles with HPV (Human Papillomavirus)

Medline Plus

Full Text Available ... Flu's Gonna Lose M.O.V.E. newsfeeds PSAs publications infectious disease workshop pediatric hepatitis report someone ... any link to download to your computer. Audio PSAs :30-second branded MP3 :30-second unbranded MP3 : ...

One Family's Struggles with Rotavirus

Medline Plus

Full Text Available ... Flu's Gonna Lose M.O.V.E. newsfeeds PSAs publications infectious disease workshop pediatric hepatitis report someone ... any link to download to your computer. Audio PSAs :30-second branded MP3 :30-second unbranded MP3 : ...

Development and In vitro Evaluation of Betahistine Adhesive-Type ...

African Journals Online (AJOL)

Purpose: To develop a transdermal betahistine (BTH) delivery system using different pressure sensitive adhesives (PSAs) including acrylics, polyisobutylene and styrenic rubber solution. Methods: Formulations were prepared by solvent casting and adhesive transfer method. PSAs - acrylate vinylacetate (AVA), hydrophilic ...

It is definitely unethical to manipulate financial statements. But maybe it is less unethical, and better, than real manipulation

OpenAIRE

Schøler, Finn

2013-01-01

OBJECTIVES AND RESEARCH QUESTIONS:During the last 25 years, a huge number of articles have been published, dealing with earnings management, concerning how to detect it, the different motives and the consequences. Already Schipper (1989) discussed the distinction between accounting and real manipulation in her pioneering comments on earnings management. Later, Healy and Wahlen (1999) document the two forms of earnings management. The accounting-based earnings manipulation involves choosing ap...

Bromelain: an overview of industrial application and purification strategies.

Science.gov (United States)

Arshad, Zatul Iffah Mohd; Amid, Azura; Yusof, Faridah; Jaswir, Irwandi; Ahmad, Kausar; Loke, Show Pau

2014-09-01

This review highlights the use of bromelain in various applications with up-to-date literature on the purification of bromelain from pineapple fruit and waste such as peel, core, crown, and leaves. Bromelain, a cysteine protease, has been exploited commercially in many applications in the food, beverage, tenderization, cosmetic, pharmaceutical, and textile industries. Researchers worldwide have been directing their interest to purification strategies by applying conventional and modern approaches, such as manipulating the pH, affinity, hydrophobicity, and temperature conditions in accord with the unique properties of bromelain. The amount of downstream processing will depend on its intended application in industries. The breakthrough of recombinant DNA technology has facilitated the large-scale production and purification of recombinant bromelain for novel applications in the future.

Physicians under the influence: social psychology and industry marketing strategies.

Science.gov (United States)

Sah, Sunita; Fugh-Berman, Adriane

2013-01-01

Pharmaceutical and medical device companies apply social psychology to influence physicians' prescribing behavior and decision making. Physicians fail to recognize their vulnerability to commercial influences due to self-serving bias, rationalization, and cognitive dissonance. Professionalism offers little protection; even the most conscious and genuine commitment to ethical behavior cannot eliminate unintentional, subconscious bias. Six principles of influence - reciprocation, commitment, social proof, liking, authority, and scarcity - are key to the industry's routine marketing strategies, which rely on the illusion that the industry is a generous avuncular partner to physicians. In order to resist industry influence, physicians must accept that they are vulnerable to subconscious bias and have both the motivation and means to resist industry influence. A culture in which accepting industry gifts engenders shame rather than gratitude will reduce conflicts of interest. If greater academic prestige accrues to distant rather than close relationships with industry, then a new social norm may emerge that promotes patient care and scientific integrity. In addition to educating faculty and students about the social psychology underlying sophisticated but potentially manipulative marketing and about how to resist it, academic medical institutions should develop strong organizational policies to counteract the medical profession's improper dependence on industry. © 2013 American Society of Law, Medicine & Ethics, Inc.

Review: An Overview of Spinal Manipulation and Mobilization Effects

Directory of Open Access Journals (Sweden)

Behnam Akhbari

2007-07-01

Full Text Available Manipulation and mobilization are two different forms of manual therapy commonly employed in the management of musculoskeletal disorders. Spinal manipulation and mobilization are often distinguished from one another by reference to certain biomechanical parameters such as peak force, duration and magnitude of translation. However, as of yet, there is relatively little research which distinguishes between them in terms of neurological mechanisms or clinical effectiveness. Manipulation may particularly stimulate receptors within deep inter-vertebral muscles, while mobilization techniques most likely affect more superficial axial muscles.

Complexity in Climate Change Manipulation Experiments

DEFF Research Database (Denmark)

Kreyling, Juergen; Beier, Claus

2014-01-01

Climate change goes beyond gradual changes in mean conditions. It involves increased variability in climatic drivers and increased frequency and intensity of extreme events. Climate manipulation experiments are one major tool to explore the ecological impacts of climate change. Until now...... variability in temperature are ecologically important. Embracing complexity in future climate change experiments in general is therefore crucial......., precipitation experiments have dealt with temporal variability or extreme events, such as drought, resulting in a multitude of approaches and scenarios with limited comparability among studies. Temperature manipulations have mainly been focused only on warming, resulting in better comparability among studies...

Reconfigurable metamaterials for terahertz wave manipulation

Science.gov (United States)

Hashemi, Mohammed R.; Cakmakyapan, Semih; Jarrahi, Mona

2017-09-01

Reconfigurable metamaterials have emerged as promising platforms for manipulating the spectral and spatial properties of terahertz waves without being limited by the characteristics of naturally existing materials. Here, we present a comprehensive overview of various types of reconfigurable metamaterials that are utilized to manipulate the intensity, phase, polarization, and propagation direction of terahertz waves. We discuss various reconfiguration mechanisms based on optical, electrical, thermal, and mechanical stimuli while using semiconductors, superconductors, phase-change materials, graphene, and electromechanical structures. The advantages and disadvantages of different reconfigurable metamaterial designs in terms of modulation efficiency, modulation bandwidth, modulation speed, and system complexity are discussed in detail.

Hydraulic manipulator design, analysis, and control at Oak Ridge National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Kress, R.L.; Jansen, J.F. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Love, L.J. [Oak Ridge Inst. for Science and Education, TN (United States); Basher, A.M.H. [South Carolina State Univ., Orangeburg, SC (United States)

1996-09-01

To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned to hydraulics as a means of actuation. Hydraulics have always been the actuator of choice when designing heavy-life construction and mining equipment such as bulldozers, backhoes, and tunneling devices. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem) sophisticated modeling, analysis, and control experiments are usually needed. To support the development and deployment of new hydraulic manipulators Oak Ridge National Laboratory (ORNL) has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The hydraulics laboratory at ORNL has three different manipulators. First is a 6-Degree-of-Freedom (6-DoF), multi-planer, teleoperated, flexible controls test bed used for the development of waste tank clean-up manipulator controls, thermal studies, system characterization, and manipulator tracking. Finally, is a human amplifier test bed used for the development of an entire new class of teleoperated systems. To compliment the hardware in the hydraulics laboratory, ORNL has developed a hydraulics simulation capability including a custom package to model the hydraulic systems and manipulators for performance studies and control development. This paper outlines the history of hydraulic manipulator developments at ORNL, describes the hydraulics laboratory, discusses the use of the equipment within the laboratory, and presents some of the initial results from experiments and modeling associated with these hydraulic manipulators. Included are some of the results from the development of the human amplifier/de-amplifier concepts, the characterization of the thermal sensitivity of hydraulic systems, and end-point tracking accuracy studies. Experimental and analytical

Hydraulic manipulator design, analysis, and control at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Kress, R.L.; Jansen, J.F.; Basher, A.M.H.

1996-09-01

To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned to hydraulics as a means of actuation. Hydraulics have always been the actuator of choice when designing heavy-life construction and mining equipment such as bulldozers, backhoes, and tunneling devices. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem) sophisticated modeling, analysis, and control experiments are usually needed. To support the development and deployment of new hydraulic manipulators Oak Ridge National Laboratory (ORNL) has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The hydraulics laboratory at ORNL has three different manipulators. First is a 6-Degree-of-Freedom (6-DoF), multi-planer, teleoperated, flexible controls test bed used for the development of waste tank clean-up manipulator controls, thermal studies, system characterization, and manipulator tracking. Finally, is a human amplifier test bed used for the development of an entire new class of teleoperated systems. To compliment the hardware in the hydraulics laboratory, ORNL has developed a hydraulics simulation capability including a custom package to model the hydraulic systems and manipulators for performance studies and control development. This paper outlines the history of hydraulic manipulator developments at ORNL, describes the hydraulics laboratory, discusses the use of the equipment within the laboratory, and presents some of the initial results from experiments and modeling associated with these hydraulic manipulators. Included are some of the results from the development of the human amplifier/de-amplifier concepts, the characterization of the thermal sensitivity of hydraulic systems, and end-point tracking accuracy studies. Experimental and analytical

Do professional norms in the banking industry favor risk-taking?

OpenAIRE

Cohn, Alain; Fehr, Ernst; Maréchal, Michel André

2017-01-01

In recent years, the banking industry has witnessed several cases of excessive risk-taking that frequently have been attributed to problematic professional norms. We conduct experiments with employees from several banks in which we manipulate the saliency of their professional identity and subsequently measure their risk aversion in a real stakes investment task. If bank employees are exposed to professional norms that favor risk-taking, they should become more willing to take risks when thei...

Object Oriented and Functional Programming for Symbolic Manipulation

OpenAIRE

Vlasov, Alexander Yu.

1999-01-01

The advantages of mixed approach with using different kinds of programming techniques for symbolic manipulation are discussed. The main purpose of approach offered is merge the methods of object oriented programming that convenient for presentation data and algorithms for user with advantages of functional languages for data manipulation, internal presentation, and portability of software.

Task-oriented structural design of manipulators based on operability evaluation

International Nuclear Information System (INIS)

Kotosaka, Shin-ya; Asama, Hajime; Takata, Shozo; Hiraoka, Hiroyuki; Kohda, Takehisa; Matsumoto, Akihiro; Endo, Isao.

1995-01-01

In this paper, a new method for designing the structure of manipulators based on evaluation of their adaptability to tasks is proposed. In the method, task directions are classified into three kinds of direction; operational direction, constrained direction and free direction. On each direction, condition of constraints by task environment is represented. The tasks are represented by a set of direction and condition of constraints. A new criterion, operability, is defined to quantify adaptability of manipulator to tasks, taking account of mobility in operational directions and immobility in constrained directions. The mobility and immobility is calculated based on the Jacobian matrix of manipulator. The operability evaluation method is implemented, and applied to structural design of manipulators, in which link parameters are optimized by the genetic algorithm. This system can derive suitable structure of manipulator to various tasks. The effectiveness of the system is shown concerning examples of welding tasks. (author)

Dietary manipulations for improving productivity in ruminant livestock

International Nuclear Information System (INIS)

Beever, D.E.

1989-01-01

Against a background of the major aspects of forage utilization by the rumen ecosystem and host animal metabolism, the need to manipulate the nature of the diet in order to improve animal productivity is reviewed. A number of criteria by which possible dietary manipulants should be considered are provided. The role of feed additives to manipulate rumen fermentation characteristics with respect to volatile fatty acid production, suppression of methanogenesis, and stimulation of microbial protein synthesis is discussed, and the possible benefits of changing the rumen microflora (e.g. by defaunation) are considered. The potential of nitrogen, energy and specific amino acid supplements to enhance rumen fermentation and/or nutrient absorption is examined and the paper concludes with consideration of possible areas where dietary manipulation could be beneficial, but to date suitable technology has not been satisfactorily developed. In this context, the nutritional effect of tannins, including enhancement of pronutritional and diminution of antinutritional factors, the suppression of rumen proteolysis and the ruminal protection of starch are examined. (author). 74 refs, 1 tab

SSSFD manipulator engineering using statistical experiment design techniques

Science.gov (United States)

Barnes, John

1991-01-01

The Satellite Servicer System Flight Demonstration (SSSFD) program is a series of Shuttle flights designed to verify major on-orbit satellite servicing capabilities, such as rendezvous and docking of free flyers, Orbital Replacement Unit (ORU) exchange, and fluid transfer. A major part of this system is the manipulator system that will perform the ORU exchange. The manipulator must possess adequate toolplate dexterity to maneuver a variety of EVA-type tools into position to interface with ORU fasteners, connectors, latches, and handles on the satellite, and to move workpieces and ORUs through 6 degree of freedom (dof) space from the Target Vehicle (TV) to the Support Module (SM) and back. Two cost efficient tools were combined to perform a study of robot manipulator design parameters. These tools are graphical computer simulations and Taguchi Design of Experiment methods. Using a graphics platform, an off-the-shelf robot simulation software package, and an experiment designed with Taguchi's approach, the sensitivities of various manipulator kinematic design parameters to performance characteristics are determined with minimal cost.

Perspectives on object manipulation and action grammar for percussive actions in primates.

Science.gov (United States)

Hayashi, Misato

2015-11-19

The skill of object manipulation is a common feature of primates including humans, although there are species-typical patterns of manipulation. Object manipulation can be used as a comparative scale of cognitive development, focusing on its complexity. Nut cracking in chimpanzees has the highest hierarchical complexity of tool use reported in non-human primates. An analysis of the patterns of object manipulation in naive chimpanzees after nut-cracking demonstrations revealed the cause of difficulties in learning nut-cracking behaviour. Various types of behaviours exhibited within a nut-cracking context can be examined in terms of the application of problem-solving strategies, focusing on their basis in causal understanding or insightful intentionality. Captive chimpanzees also exhibit complex forms of combinatory manipulation, which is the precursor of tool use. A new notation system of object manipulation was invented to assess grammatical rules in manipulative actions. The notation system of action grammar enabled direct comparisons to be made between primates including humans in a variety of object-manipulation tasks, including percussive-tool use. © 2015 The Author(s).

Preliminary Feasibility Study on the Construction of Steel Hot Cell Facility for Precise Manipulated Examinations

International Nuclear Information System (INIS)

Ahn, Sangbok; Kwon, Hyungmun; Kim, Heemoon; Kim, Dosik; Min, Duckkee; Hong, Kwonpyo

2006-01-01

Hot laboratory is essential facility to research and develop in the nuclear industries to examine radioactive materials. The post irradiation examinations for irradiated fuels and materials should be mainly conducted in the hot cell facility to protect radiations to operators. Hot cells are divided into a concrete hot cell and a steel hot cell according to the wall materials. Usually a concrete hot cell is applied to test for high level radioactive materials like as a fuel assembly, rods, and large structure specimens, and a steel hot cell for comparatively lower level activity materials in fuel fragments, and small structural materials. A steel hot cell has many benefits in a specimen manipulation, construction and maintenance costs. In recent the test for the irradiated materials is more frequently required a small and precise manipulating examination for higher degree tests of research and developments. Unfortunately hot laboratory facilities in domestics have mainly constituted of concrete hot cells, and not ready for techniques in steel hot cells. In this paper the construction feasibility of steel hot cell facility is preliminary reviewed in the points of the status of domestic facilities, the test demand prospect and detailed plans

Species-specific ant brain manipulation by a specialized fungal parasite.

Science.gov (United States)

de Bekker, Charissa; Quevillon, Lauren E; Smith, Philip B; Fleming, Kimberly R; Ghosh, Debashis; Patterson, Andrew D; Hughes, David P

2014-08-29

A compelling demonstration of adaptation by natural selection is the ability of parasites to manipulate host behavior. One dramatic example involves fungal species from the genus Ophiocordyceps that control their ant hosts by inducing a biting behavior. Intensive sampling across the globe of ants that died after being manipulated by Ophiocordyceps suggests that this phenomenon is highly species-specific. We advance our understanding of this system by reconstructing host manipulation by Ophiocordyceps parasites under controlled laboratory conditions and combining this with field observations of infection rates and a metabolomics survey. We report on a newly discovered species of Ophiocordyceps unilateralis sensu lato from North America that we use to address the species-specificity of Ophiocordyceps-induced manipulation of ant behavior. We show that the fungus can kill all ant species tested, but only manipulates the behavior of those it infects in nature. To investigate if this could be explained at the molecular level, we used ex vivo culturing assays to measure the metabolites that are secreted by the fungus to mediate fungus-ant tissue interactions. We show the fungus reacts heterogeneously to brains of different ant species by secreting a different array of metabolites. By determining which ion peaks are significantly enriched when the fungus is grown alongside brains of its naturally occurring host, we discovered candidate compounds that could be involved in behavioral manipulation by O. unilateralis s.l.. Two of these candidates are known to be involved in neurological diseases and cancer. The integrative work presented here shows that ant brain manipulation by O. unilateralis s.l. is species-specific seemingly because the fungus produces a specific array of compounds as a reaction to the presence of the host brain it has evolved to manipulate. These studies have resulted in the discovery of candidate compounds involved in establishing behavioral manipulation

Broadband reflected wavefronts manipulation using structured phase gradient metasurfaces

Directory of Open Access Journals (Sweden)

Xiao-Peng Wang

2016-06-01

Full Text Available Acoustic metasurface (AMS is a good candidate to manipulate acoustic waves due to special acoustic performs that cannot be realized by traditional materials. In this paper, we design the AMS by using circular-holed cubic arrays. The advantages of our AMS are easy assemble, subwavelength thickness, and low energy loss for manipulating acoustic waves. According to the generalized Snell’s law, acoustic waves can be manipulated arbitrarily by using AMS with different phase gradients. By selecting suitable hole diameter of circular-holed cube (CHC, some interesting phenomena are demonstrated by our simulations based on finite element method, such as the conversion of incoming waves into surface waves, anomalous reflections (including negative reflection, acoustic focusing lens, and acoustic carpet cloak. Our results can provide a simple approach to design AMSes and use them in wavefront manipulation and manufacturing of acoustic devices.

Manipulation of biomimetic objects in acoustic levitation

OpenAIRE

Castro , Angelica

2013-01-01

This thesis contains 9 chapters making a total of 205 pages including articles. The articles are menctioned throughout the work and are listed as annexes. These articles were produced during the PhD.; Levitation is a promising tool for contactless guiding and non-toxic manipulation. Acoustic levitation by ultrasonic standing waves (USW) allows micron-scale particle manipulation in acoustic resonators. The main goal of this thesis is to explore the possibilities given by the acoustic levitatio...

Advanced real-time manipulation of video streams

CERN Document Server

Herling, Jan

2014-01-01

Diminished Reality is a new fascinating technology that removes real-world content from live video streams. This sensational live video manipulation actually removes real objects and generates a coherent video stream in real-time. Viewers cannot detect modified content. Existing approaches are restricted to moving objects and static or almost static cameras and do not allow real-time manipulation of video content. Jan Herling presents a new and innovative approach for real-time object removal with arbitrary camera movements.

Development and commissioning of a links type inspection manipulator

International Nuclear Information System (INIS)

Whitcomb, H.M.; Ford, G.T.

1988-01-01

In order to access a number of tortuous inspection routes in the Heysham II/Torness reactors, the Central Electricity Generating Board (CEGB) Remote Inspection Group (RIG) have developed a 'links' type manipulator in conjunction with Babcock Power Ltd. This manipulator operates from the reactor pile cap and allows placement of a television camera within the pressure vessel up to 4m laterally from a standpipe of only 140mm in diameter. The design features of this novel manipulator are described together with the solutions developed to overcome particular difficulties experienced during commissioning. (author)

Rotor-Flying Manipulator: Modeling, Analysis, and Control

Directory of Open Access Journals (Sweden)

Bin Yang

2014-01-01

Full Text Available Equipping multijoint manipulators on a mobile robot is a typical redesign scheme to make the latter be able to actively influence the surroundings and has been extensively used for many ground robots, underwater robots, and space robotic systems. However, the rotor-flying robot (RFR is difficult to be made such redesign. This is mainly because the motion of the manipulator will bring heavy coupling between itself and the RFR system, which makes the system model highly complicated and the controller design difficult. Thus, in this paper, the modeling, analysis, and control of the combined system, called rotor-flying multijoint manipulator (RF-MJM, are conducted. Firstly, the detailed dynamics model is constructed and analyzed. Subsequently, a full-state feedback linear quadratic regulator (LQR controller is designed through obtaining linearized model near steady state. Finally, simulations are conducted and the results are analyzed to show the basic control performance.

The evolution of teleoperated manipulators at ORNL

International Nuclear Information System (INIS)

Kress, R.L.; Jansen, J.F.; Noakes, M.W.; Herndon, J.N.

1996-01-01

ORNL has made significant contributions to teleoperator and telerobotics technology for two decades and continues with an aggressive program today. Examples of past projects are: (1) the M2 servomanipulator, which was the first digitally controlled teleoperator; (2) the Advanced Servomanipulator (ASM), which was the first remotely maintainable teleoperator; (3) the CESARm/Kraft dissimilar teleoperated system; and (4) the Laboratory Telerobotic Manipulator (LTM), a 7-Degree-of-Freedom (7-DOF) telerobot built as a prototype for work in space. More recently, ORNL has become heavily involved with Environmental Restoration and Waste Management (ERWM) robotics programs funded by the Department of Energy (DOE). The ERWM program requires high payloads and high dexterity. As a result, a hydraulically actuated, dual-arm system comprised of two 6-DOF arms mounted on a 5-DOF base has been constructed and is being used today for various research tasks and for decontamination and dismantlement activities. All of these teleoperated manipulator systems build upon the experiences gained throughout the almost two decades of development. Each system incorporates not only the latest technology in computers, sensors, and electronics, but each new . system also adds at least one new feature to the technologies already developed and demonstrated in the previous system(s). As a result of this process, a serious study of these manipulator systems is a study in the evolution of teleoperated manipulator the systems in general. This provides insight not only into the research and development paths chosen in the past, but also into the appropriate directions for future teleoperator and telerobotics research. This paper examines each of the teleoperated/telerobotic systems developed at ORNL, summarizes their features and capabilities, examines the state of the most current telerobotic system (the Dual Arm Work Module), PM provides direction for a Next Generation Telerobotic Manipulator system

Why having one’s rationality openly exploited might be considered manipulation

NARCIS (Netherlands)

Kamphorst, B.A.; Kalis, A.

2014-01-01

This paper responds to Daniel Dennett’s 2012 Praemium Erasmianum Essay Erasmus: Sometimes a Spin Doctor is Right in which he makes a distinction between manipulation and non-manipulative influence. Dennett argues that influence on an individual’s decision-making process is not manipulative so long

Prioritization of Attributes for Palletizing Robots in Beverage Industry of Pakistan

Directory of Open Access Journals (Sweden)

BILAL AHMED

2017-07-01

Full Text Available Robots are extensively used in modern manufacturing industries to perform numerous repetitive operations. The challenge of selecting the most appropriate robot for a particular manufacturing setup is progressively becoming complex as there are numerous selection criteria and more alternatives available in market. Only a limited amount of research is available in literature which focuses on the selection of industrial robots for beverage industry. This study offers a country specific application of AHP (Analytical Hierarchy Process in problem of palletizing robot selection for beverage industry of Pakistan. The problem is structured in standard AHP hierarchy and equations. The factors initially explored from the concerned literature are prioritized by the industry experts. The available robot alternatives are evaluated for each parameter and results are computed with the help of Exert Choice, a commercial AHP software. It is observed that experts in Pakistan beverage industry are very sensitive to operating costs of the robots and they do not assign as much weightage to technical parameters like repeatability and programmability. The robots with lesser associated costs and better speed and ?manipulator reach? are higher in ranking. The findings are beneficial for the international investors and local beverage industry managers to corroborate the current trends and preferences of the said industry.

Prioritization of attributes for palletizing robots in beverage industry of pakistan

International Nuclear Information System (INIS)

Ahmed, B.; Ali, H.M.K.; Sultan, A.; Rana, B.B.

2017-01-01

Robots are extensively used in modern manufacturing industries to perform numerous repetitive operations. The challenge of selecting the most appropriate robot for a particular manufacturing setup is progressively becoming complex as there are numerous selection criteria and more alternatives available in market. Only a limited amount of research is available in literature which focuses on the selection of industrial robots for beverage industry. This study offers a country specific application of AHP (Analytical Hierarchy Process) in problem of palletizing robot selection for beverage industry of Pakistan. The problem is structured in standard AHP hierarchy and equations. The factors initially explored from the concerned literature are prioritized by the industry experts. The available robot alternatives are evaluated for each parameter and results are computed with the help of Exert Choice, a commercial AHP software. It is observed that experts in Pakistan beverage industry are very sensitive to operating costs of the robots and they do not assign as much weightage to technical parameters like repeatability and programmability. The robots with lesser associated costs and better speed and 'manipulator reach' are higher in ranking. The findings are beneficial for the international investors and local beverage industry managers to corroborate the current trends and preferences of the said industry. (author)

Equations of Motion of Free-Floating Spacecraft-Manipulator Systems: An Engineer's Tutorial

Directory of Open Access Journals (Sweden)

Markus Wilde

2018-04-01

Full Text Available The paper provides a step-by-step tutorial on the Generalized Jacobian Matrix (GJM approach for modeling and simulation of spacecraft-manipulator systems. The General Jacobian Matrix approach describes the motion of the end-effector of an underactuated manipulator system solely by the manipulator joint rotations, with the attitude and position of the base-spacecraft resulting from the manipulator motion. The coupling of the manipulator motion with the base-spacecraft are thus expressed in a generalized inertia matrix and a GJM. The focus of the paper lies on the complete analytic derivation of the generalized equations of motion of a free-floating spacecraft-manipulator system. This includes symbolic analytic expressions for all inertia property matrices of the system, including their time derivatives and joint-angle derivatives, as well as an expression for the generalized Jacobian of a generic point on any link of the spacecraft-manipulator system. The kinematics structure of the spacecraft-manipulator system is described both in terms of direction-cosine matrices and unit quaternions. An additional important contribution of this paper is to propose a new and more detailed definition for the modes of maneuvering of a spacecraft-manipulator. In particular, the two commonly used categories free-flying and free-floating are expanded by the introduction of five categories, namely floating, rotation-floating, rotation-flying, translation-flying, and flying. A fully-symbolic and a partially-symbolic option for the implementation of a numerical simulation model based on the proposed analytic approach are introduced and exemplary simulation results for a planar four-link spacecraft-manipulator system and a spatial six-link spacecraft manipulator system are presented.

Symbolic manipulation methods in general relativity and fluid mechanics

International Nuclear Information System (INIS)

Cohen, I.

1976-03-01

Algebraic manipulation by computer, or automatic symbol manipulation (ASM) has not been used much in theoretical physics, especially if one compares it with numerical methods. Three examples of the use of ASM as a tool in theoretical physics are discussed. (Auth.)

Know Stroke: Know the Signs, Act in Time Video

Medline Plus

Full Text Available ... Materials | Research Literature | Neurological Disorders National Institutes of Health National Institute of Neurological Disorders and Stroke Search ... Radio PSAs » Videos and TV PSAs » Widgets » Infographics Health Professional Resources Campaign Partners Research Programs Español ...

Know Stroke: Know the Signs, Act in Time Video

Medline Plus

Full Text Available ... PSAs » Videos and TV PSAs » Widgets » Infographics Health Professional Resources Campaign Partners Research Programs Español Research ... » Home | About the Campaign | Stroke Materials | Health Professional Resources | Campaign Partners | Research Programs | Contact | Disclaimer | Privacy | ...

Know Stroke: Know the Signs, Act in Time Video

Medline Plus

Full Text Available ... About the Campaign Stroke Materials » Brochures » Toolkits and Posters » Radio PSAs » Videos and TV PSAs » Widgets » Infographics ... remember the names of my grandchildren or my daughters. It was a complete blank." Alma Shanley: "And ...

Know Stroke: Know the Signs, Act in Time Video

Medline Plus

Full Text Available ... Brochures » Toolkits and Posters » Radio PSAs » Videos and TV PSAs » Widgets » Infographics Health Professional Resources Campaign Partners ... Dr. Galen Henderson, Harvard Medical School, Brigham and Women's Hospital: "Strokes are preventable, they can be prevented, ...

Kinematics Modelling of Tendon-Driven Continuum Manipulator with Crossed Notches

Science.gov (United States)

Yang, Z. X.; Yang, W. L.; Du, Z. J.

2018-03-01

Single port surgical robot (SPSR) is a giant leap in the development of minimally invasive surgical robot. An innovative manipulator with high control accuracy and good kinematic dexterity can reduce wound, expedite recovery, and improve the success rate. This paper presents a tendon-driven continuum manipulator with crossed notches. This manipulator has two degrees of freedom (DOF), which possesses good flexibility and high capacity. Then based on cantilever beam theory, a mechanics model is proposed, which connects external force and deformation of a single flexible ring (SFR). By calculating the deformation of each SFR, the manipulator is considered as a series robot whose joint numbers is equal to SFR numbers, and the kinematics model is established through Denavit-Hartenberg (D-H) procedure. In this paper, the total manipulator is described as a curve tube whose curvature is increased from tip to base. Experiments were conducted and the comparison between theoretical and actual results proved the rationality of the models.

Integrality and separability of multitouch interaction techniques in 3D manipulation tasks.

Science.gov (United States)

Martinet, Anthony; Casiez, Géry; Grisoni, Laurent

2012-03-01

Multitouch displays represent a promising technology for the display and manipulation of data. While the manipulation of 2D data has been widely explored, 3D manipulation with multitouch displays remains largely unexplored. Based on an analysis of the integration and separation of degrees of freedom, we propose a taxonomy for 3D manipulation techniques with multitouch displays. Using that taxonomy, we introduce Depth-Separated Screen-Space (DS3), a new 3D manipulation technique based on the separation of translation and rotation. In a controlled experiment, we compared DS3 with Sticky Tools and Screen-Space. Results show that separating the control of translation and rotation significantly affects performance for 3D manipulation, with DS3 performing faster than the two other techniques.

Trajectory Planning of 7-DOF Space Manipulator for Minimizing Base Disturbance

Directory of Open Access Journals (Sweden)

Qiang Zhang

2016-03-01

Full Text Available In the free-floating mode, there is intense dynamic coupling existing between the space manipulator and the base, and the base attitude may change while performing a motion with its manipulator. Therefore, it is necessary to reduce the interference that resulted from the manipulator movement. For planning trajectories of the space manipulator with 7 degrees of freedom (7-DOF, simulated annealing particle swarm optimization (SAPSO algorithm is presented in the paper. Firstly, kinematics equations are setup. Secondly, the joint functions are parameterized by sinusoidal functions, and the objective function is defined according to the motion constraints of manipulator and accuracy requirements of the base attitude. Finally, SAPSO algorithm is used to search the optimal trajectory. The simulation results verify the proposed method.

Controlled AFM manipulation of small nanoparticles and assembly of hybrid nanostructures

International Nuclear Information System (INIS)

Kim, Suenne; Shafiei, Farbod; Ratchford, Daniel; Li Xiaoqin

2011-01-01

We demonstrate controlled manipulation of semiconductor and metallic nanoparticles (NPs) with 5-15 nm diameters and assemble these NPs into hybrid structures. The manipulation is accomplished under ambient environment using a commercial atomic force microscope (AFM). There are particular difficulties associated with manipulating NPs this small. In addition to spatial drift, the shape of an asymmetric AFM tip has to be taken into account in order to understand the intended and actual manipulation results. Furthermore, small NPs often attach to the tip via electrostatic interaction and modify the effective tip shape. We suggest a method for detaching the NPs by performing a pseudo-manipulation step. Finally, we show by example the ability to assemble these small NPs into prototypical hybrid nanostructures with well-defined composition and geometry.

Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). The R and D aims at establishment of observation/manipulation technology of atoms and molecules as common basic technology in various industrial fields such as new material, electronics, bio-technology and chemistry. The R and D thus aims at establishment of observation/manipulation of solid surfaces and DNA organic molecules, formation of fine structures of atomic surface arrangement, and calculation/ simulation for predicting a reaction theorem of atom and molecule surfaces. In fiscal 1997, research was made on improvement and development of computer simulation environment, and description of an excited state of electrons by Green function. Establishment of a construction method and computation code is under investigation for pseudo- potential dependent on excitation energy. Survey was made on research trends of the atom technology by visiting overseas academic societies and institutions. International Symposium on Atom Technology was also held in Tokyo in Nov. 1997

Microrobots to Manipulate Cells

DEFF Research Database (Denmark)

Glückstad, Jesper

At DTU Fotonik we developed and harnessed the new and emerging research area of so-called Light Robotics including the 3D-printed micro-tools coined Wave-guided Optical Waveguides that can be real-time laser-manipulated in a 3D-volume with six-degrees-of-freedom. To be exploring the full potentia...

Manipulation of biological samples using micro and nano techniques

DEFF Research Database (Denmark)

Castillo, Jaime; Dimaki, Maria; Svendsen, Winnie Edith

2009-01-01

to their natural structure. Thanks to the advances in micro- and nanofabrication during the last decades several manipulation techniques offer us the possibility to image, characterize and manipulate biological material in a controlled way. Using these techniques the integration of biomaterials with remarkable...

Strong monotonicity in mixed-state entanglement manipulation

International Nuclear Information System (INIS)

Ishizaka, Satoshi

2006-01-01

A strong entanglement monotone, which never increases under local operations and classical communications (LOCC), restricts quantum entanglement manipulation more strongly than the usual monotone since the usual one does not increase on average under LOCC. We propose strong monotones in mixed-state entanglement manipulation under LOCC. These are related to the decomposability and one-positivity of an operator constructed from a quantum state, and reveal geometrical characteristics of entangled states. These are lower bounded by the negativity or generalized robustness of entanglement

Price Manipulation in an Experimental Asset Market

OpenAIRE

Veiga Helena; Vorsatz Marc

2006-01-01

We analyze in the laboratory whether an uninformed trader is able to manipulate the price of a financial asset. To do so, we compare the results of two different experimental treatments. In the Benchmark Treatment, twelve subjects trade a common value asset that takes either a high or a low value. Information is distributed asymmetrically, only three outof twelve subjects know the actual value of the asset. The Manipulation Treatment is identical to the Benchmark Treatment apart from the fact...

Global manipulation of digital images can lead to variation in cytological diagnosis.

Science.gov (United States)

Prasad, H; Wanjari, Sangeeta; Parwani, Rajkumar

2011-03-31

With the adoption of a completely electronic workflow by several journals and the advent of telepathology, digital imaging has become an integral part of every scientific research. However, manipulating digital images is very easy, and it can lead to misinterpretations. To analyse the impact of manipulating digital images on their diagnosis. Digital images were obtained from Papanicolaou-stained smears of dysplastic and normal oral epithelium. They were manipulated using GNU Image Manipulation Program (GIMP) to alter their brightness and contrast and color levels. A Power Point presentation composed of slides of these manipulated images along with the unaltered originals arranged randomly was created. The presentation was shown to five observers individually who rated the images as normal, mild, moderate or severe dysplasia. Weighted κ statistics was used to measure and assess the levels of agreement between observers. Levels of agreement between manipulated images and original images varied greatly among observers. Variation in diagnosis was in the form of overdiagnosis or under-diagnosis, usually by one grade. Global manipulations of digital images of cytological slides can significantly affect their interpretation. Such manipulations should therefore be kept to a minimum, and avoided wherever possible.

An integrated open-cavity system for magnetic bead manipulation.

Science.gov (United States)

Abu-Nimeh, F T; Salem, F M

2013-02-01

Superparamagnetic beads are increasingly used in biomedical assays to manipulate, transport, and maneuver biomaterials. We present a low-cost integrated system designed in bulk CMOS to manipulate and separate biomedical magnetic beads. The system consists of 8 × 8 coil-arrays suitable for single bead manipulation, or collaborative multi-bead manipulation, using pseudo-parallel executions. We demonstrate the flexibility of the design in terms of different coil sizes, DC current levels, and layout techniques. In one array module example, the size of a single coil is 30 μm × 30 μm and the full array occupies an area of 248 μm × 248 μm in 0.5 μm CMOS technology. The programmable DC current source supports 8 discrete levels up to 1.5 mA. The total power consumption of the entire module is 9 mW when running at full power.

Floating-Gate Manipulated Graphene-Black Phosphorus Heterojunction for Nonvolatile Ambipolar Schottky Junction Memories, Memory Inverter Circuits, and Logic Rectifiers.

Science.gov (United States)

Li, Dong; Chen, Mingyuan; Zong, Qijun; Zhang, Zengxing

2017-10-11

The Schottky junction is an important unit in electronics and optoelectronics. However, its properties greatly degrade with device miniaturization. The fast development of circuits has fueled a rapid growth in the study of two-dimensional (2D) crystals, which may lead to breakthroughs in the semiconductor industry. Here we report a floating-gate manipulated nonvolatile ambipolar Schottky junction memory from stacked all-2D layers of graphene-BP/h-BN/graphene (BP, black phosphorus; h-BN, hexagonal boron nitride) in a designed floating-gate field-effect Schottky barrier transistor configuration. By manipulating the voltage pulse applied to the control gate, the device exhibits ambipolar characteristics and can be tuned to act as graphene-p-BP or graphene-n-BP junctions with reverse rectification behavior. Moreover, the junction exhibits good storability properties of more than 10 years and is also programmable. On the basis of these characteristics, we further demonstrate the application of the device to dual-mode nonvolatile Schottky junction memories, memory inverter circuits, and logic rectifiers.

Radioactive source manipulator and stowage device

International Nuclear Information System (INIS)

Burton, C.

1980-01-01

A description is given of a radioactive source manipulator and stowage device comprising: a cylindrical body; a transversely disposed socket formed near one end of said cylindrical body for receiving a radioactive source; a cylindrical sleeve rotatably mounted on said cylindrical body; and an aperture formed in the wall of said sleeve whereby rotation of said sleeve to axially align said aperture with said socket will permit a radioactive source to be inserted into and removed from said socket and rotation of said sleeve to move said aperture out of alignment with said socket when the socket contains a radioactive source readies the device for manipulation and stowage

Sports Tournament Predictions Using Direct Manipulation.

Science.gov (United States)

Vuillemot, Romain; Perin, Charles

2016-01-01

An advanced interface for sports tournament predictions uses direct manipulation to allow users to make nonlinear predictions. Unlike previous interface designs, the interface helps users focus on their prediction tasks by enabling them to first choose a winner and then fill out the rest of the bracket. In real-world tests of the proposed interface (for the 2014 FIFA World Cup tournament and 2015/2016 UEFA Champions League), the authors validated the use of direct manipulation as an alternative to widgets. Using visitor interaction logs, they were able to determine the strategies people use to perform predictions and identify potential areas of improvement for further prediction interfaces.

BioWord: A sequence manipulation suite for Microsoft Word

Directory of Open Access Journals (Sweden)

Anzaldi Laura J

2012-06-01

Full Text Available Abstract Background The ability to manipulate, edit and process DNA and protein sequences has rapidly become a necessary skill for practicing biologists across a wide swath of disciplines. In spite of this, most everyday sequence manipulation tools are distributed across several programs and web servers, sometimes requiring installation and typically involving frequent switching between applications. To address this problem, here we have developed BioWord, a macro-enabled self-installing template for Microsoft Word documents that integrates an extensive suite of DNA and protein sequence manipulation tools. Results BioWord is distributed as a single macro-enabled template that self-installs with a single click. After installation, BioWord will open as a tab in the Office ribbon. Biologists can then easily manipulate DNA and protein sequences using a familiar interface and minimize the need to switch between applications. Beyond simple sequence manipulation, BioWord integrates functionality ranging from dyad search and consensus logos to motif discovery and pair-wise alignment. Written in Visual Basic for Applications (VBA as an open source, object-oriented project, BioWord allows users with varying programming experience to expand and customize the program to better meet their own needs. Conclusions BioWord integrates a powerful set of tools for biological sequence manipulation within a handy, user-friendly tab in a widely used word processing software package. The use of a simple scripting language and an object-oriented scheme facilitates customization by users and provides a very accessible educational platform for introducing students to basic bioinformatics algorithms.

BioWord: A sequence manipulation suite for Microsoft Word

Science.gov (United States)

2012-01-01

Background The ability to manipulate, edit and process DNA and protein sequences has rapidly become a necessary skill for practicing biologists across a wide swath of disciplines. In spite of this, most everyday sequence manipulation tools are distributed across several programs and web servers, sometimes requiring installation and typically involving frequent switching between applications. To address this problem, here we have developed BioWord, a macro-enabled self-installing template for Microsoft Word documents that integrates an extensive suite of DNA and protein sequence manipulation tools. Results BioWord is distributed as a single macro-enabled template that self-installs with a single click. After installation, BioWord will open as a tab in the Office ribbon. Biologists can then easily manipulate DNA and protein sequences using a familiar interface and minimize the need to switch between applications. Beyond simple sequence manipulation, BioWord integrates functionality ranging from dyad search and consensus logos to motif discovery and pair-wise alignment. Written in Visual Basic for Applications (VBA) as an open source, object-oriented project, BioWord allows users with varying programming experience to expand and customize the program to better meet their own needs. Conclusions BioWord integrates a powerful set of tools for biological sequence manipulation within a handy, user-friendly tab in a widely used word processing software package. The use of a simple scripting language and an object-oriented scheme facilitates customization by users and provides a very accessible educational platform for introducing students to basic bioinformatics algorithms. PMID:22676326

BioWord: a sequence manipulation suite for Microsoft Word.

Science.gov (United States)

Anzaldi, Laura J; Muñoz-Fernández, Daniel; Erill, Ivan

2012-06-07

The ability to manipulate, edit and process DNA and protein sequences has rapidly become a necessary skill for practicing biologists across a wide swath of disciplines. In spite of this, most everyday sequence manipulation tools are distributed across several programs and web servers, sometimes requiring installation and typically involving frequent switching between applications. To address this problem, here we have developed BioWord, a macro-enabled self-installing template for Microsoft Word documents that integrates an extensive suite of DNA and protein sequence manipulation tools. BioWord is distributed as a single macro-enabled template that self-installs with a single click. After installation, BioWord will open as a tab in the Office ribbon. Biologists can then easily manipulate DNA and protein sequences using a familiar interface and minimize the need to switch between applications. Beyond simple sequence manipulation, BioWord integrates functionality ranging from dyad search and consensus logos to motif discovery and pair-wise alignment. Written in Visual Basic for Applications (VBA) as an open source, object-oriented project, BioWord allows users with varying programming experience to expand and customize the program to better meet their own needs. BioWord integrates a powerful set of tools for biological sequence manipulation within a handy, user-friendly tab in a widely used word processing software package. The use of a simple scripting language and an object-oriented scheme facilitates customization by users and provides a very accessible educational platform for introducing students to basic bioinformatics algorithms.

Kinematics analysis of a novel planar parallel manipulator with kinematic redundancy

Energy Technology Data Exchange (ETDEWEB)

Qu, Haibo; Guo, Sheng [Beijing Jiaotong University, Beijing (China)

2017-04-15

In this paper, a novel planar parallel manipulator with kinematic redundancy is proposed. First, the Degrees of freedom (DOF) of the whole parallel manipulator and the Relative DOF (RDOF) between the moving platform and fixed base are studied. The results indicate that the proposed mechanism is kinematically redundant. Then, the kinematics, Jacobian matrices and workspace of this proposed parallel manipulator with kinematic redundancy are analyzed. Finally, the statics simulation of the proposed parallel manipulator is performed. The obtained stress and displacement distribution can be used to determine the easily destroyed place in the mechanism configurations.

Kinematics analysis of a novel planar parallel manipulator with kinematic redundancy

International Nuclear Information System (INIS)

Qu, Haibo; Guo, Sheng

2017-01-01

In this paper, a novel planar parallel manipulator with kinematic redundancy is proposed. First, the Degrees of freedom (DOF) of the whole parallel manipulator and the Relative DOF (RDOF) between the moving platform and fixed base are studied. The results indicate that the proposed mechanism is kinematically redundant. Then, the kinematics, Jacobian matrices and workspace of this proposed parallel manipulator with kinematic redundancy are analyzed. Finally, the statics simulation of the proposed parallel manipulator is performed. The obtained stress and displacement distribution can be used to determine the easily destroyed place in the mechanism configurations

Automated visual attention manipulation

NARCIS (Netherlands)

Bosse, T.; Lambalgen, R. van; Maanen, P.P. van; Treur, J.

2009-01-01

In this paper a system for visual attention manipulation is introduced and formally described. This system is part of the design of a software agent that supports naval crew in her task to compile a tactical picture of the situation in the field. A case study is described in hich the system is used

Know Stroke: Know the Signs, Act in Time Video

Medline Plus

Full Text Available ... and Stroke Search this site: Home About the Campaign Stroke Materials » Brochures » Toolkits and Posters » Radio PSAs » ... and TV PSAs » Widgets » Infographics Health Professional Resources Campaign Partners Research Programs Español Research Spotlight The ...

Control system for the Fermilab Master-Slave servo manipulator

International Nuclear Information System (INIS)

Ducar, R.J.

1977-01-01

A control system for the Fermilab Master-Slave servo manipulator was developed. This new system offers a significant improvement in operational performance over the extant servo design with additional emphasis on simplicity of operation and maintainability. The servo manipulator is force-reflecting in each of the seven independent bilateral motions. Master force multiplication is automatically increased as the slave force is increased to its fifty pound capacity. The design incorporates triac control of the low inertia two-phase servomotors and makes extensive use of digital circuits in the servo loops. The manipulator is utilized in servicing radioactive beam-line targeting equipment

Additive manufacturing of patient-specific tubular continuum manipulators

Science.gov (United States)

Amanov, Ernar; Nguyen, Thien-Dang; Burgner-Kahrs, Jessica

2015-03-01

Tubular continuum robots, which are composed of multiple concentric, precurved, elastic tubes, provide more dexterity than traditional surgical instruments at the same diameter. The tubes can be precurved such that the resulting manipulator fulfills surgical task requirements. Up to now the only material used for the component tubes of those manipulators is NiTi, a super-elastic shape-memory alloy of nickel and titan. NiTi is a cost-intensive material and fabrication processes are complex, requiring (proprietary) technology, e.g. for shape setting. In this paper, we evaluate component tubes made of 3 different thermoplastic materials (PLA, PCL and nylon) using fused filament fabrication technology (3D printing). This enables quick and cost-effective production of custom, patient-specific continuum manipulators, produced on site on demand. Stress-strain and deformation characteristics are evaluated experimentally for 16 fabricated tubes of each thermoplastic with diameters and shapes equivalent to those of NiTi tubes. Tubes made of PCL and nylon exhibit properties comparable to those made of NiTi. We further demonstrate a tubular continuum manipulator composed of 3 nylon tubes in a transnasal, transsphenoidal skull base surgery scenario in vitro.

Teacher Learning and Mathematics Manipulatives: A Collective Case Study about Teacher Use of Manipulatives in Elementary and Middle School Mathematics Lessons

Science.gov (United States)

Puchner, Laurel; Taylor, Ann; O'Donnell, Barbara; Fick, Kathleen

2008-01-01

This collective case study analyzes the use of manipulatives in math lessons developed and taught by 4 groups of elementary teachers (K-8) involved in lesson study as part of a professional development program. The study found that in three of four lessons studied manipulative use was turned into an end in and of itself, rather than a tool, and…

Inverse Kinematics for Industrial Robots using Conformal Geometric Algebra

Directory of Open Access Journals (Sweden)

Adam L. Kleppe

2016-01-01

Full Text Available This paper shows how the recently developed formulation of conformal geometric algebra can be used for analytic inverse kinematics of two six-link industrial manipulators with revolute joints. The paper demonstrates that the solution of the inverse kinematics in this framework relies on the intersection of geometric objects like lines, circles, planes and spheres, which provides the developer with valuable geometric intuition about the problem. It is believed that this will be very useful for new robot geometries and other mechanisms like cranes and topside drilling equipment. The paper extends previous results on inverse kinematics using conformal geometric algebra by providing consistent solutions for the joint angles for the different configurations depending on shoulder left or right, elbow up or down, and wrist flipped or not. Moreover, it is shown how to relate the solution to the Denavit-Hartenberg parameters of the robot. The solutions have been successfully implemented and tested extensively over the whole workspace of the manipulators.

Do Emotional Appeals in Public Service Advertisements Influence Adolescents' Intention to Reduce Consumption of Sugar-Sweetened Beverages?

Science.gov (United States)

Bleakley, Amy; Jordan, Amy B; Hennessy, Michael; Glanz, Karen; Strasser, Andrew; Vaala, Sarah

2015-08-01

Mass media campaigns are a commonly used approach to reduce sugary drink consumption, which is linked to obesity in children and adolescents. The present study investigated the direct and mediated effects of emotional appeals in public service advertisements (PSAs) that aired between 2010 and 2012 on adolescents' intention to reduce their sugar-sweetened beverage (SSB) consumption. An online randomized experiment was conducted with a national sample of adolescent respondents ages 13 to 17 years old (N = 805). Participants were randomly assigned to 1 of 4 conditions. Three experimental conditions represented PSAs with different emotional appeals: humor, fear, and nurturance, plus a fourth control condition. The outcome was adolescents' intention to cut back on SSBs. The direct effect of fear appeals on intention was mediated through adolescents' perception of the PSAs' argument strength; perceived argument strength was also the key mediator for the indirect effects of humor and nurturance on intention. Several hypothesized mediators influenced by the appeals were not associated with intention. This is the first study to test the effect of persuasive emotional appeals used in SSB-related PSAs. The perceived strength of the PSAs' arguments is important to consider in the communication of messages designed to reduce SSB consumption.

Affective and executive network processing associated with persuasive antidrug messages.

Science.gov (United States)

Ramsay, Ian S; Yzer, Marco C; Luciana, Monica; Vohs, Kathleen D; MacDonald, Angus W

2013-07-01

Previous research has highlighted brain regions associated with socioemotional processes in persuasive message encoding, whereas cognitive models of persuasion suggest that executive brain areas may also be important. The current study aimed to identify lateral prefrontal brain areas associated with persuasive message viewing and understand how activity in these executive regions might interact with activity in the amygdala and medial pFC. Seventy adolescents were scanned using fMRI while they watched 10 strongly convincing antidrug public service announcements (PSAs), 10 weakly convincing antidrug PSAs, and 10 advertisements (ads) unrelated to drugs. Antidrug PSAs compared with nondrug ads more strongly elicited arousal-related activity in the amygdala and medial pFC. Within antidrug PSAs, those that were prerated as strongly persuasive versus weakly persuasive showed significant differences in arousal-related activity in executive processing areas of the lateral pFC. In support of the notion that persuasiveness involves both affective and executive processes, functional connectivity analyses showed greater coactivation between the lateral pFC and amygdala during PSAs known to be strongly (vs. weakly) convincing. These findings demonstrate that persuasive messages elicit activation in brain regions responsible for both emotional arousal and executive control and represent a crucial step toward a better understanding of the neural processes responsible for persuasion and subsequent behavior change.

Microradiographic microsphere manipulator

International Nuclear Information System (INIS)

Singleton, R.M.

1980-01-01

A method and apparatus are provided for radiographic characterization of small hollow spherical members (microspheres), constructed of either optically transparent or opaque materials. The apparatus involves a microsphere manipulator which holds a batch of microspheres between two parallel thin plastic films for contact microradiographic characterization or projection microradiography thereof. One plastic film is translated to relative to and parallel to the other to roll the microspheres through any desired angle to allow different views of the microspheres

Adaptive hybrid control of manipulators

Science.gov (United States)

Seraji, H.

1987-01-01

Simple methods for the design of adaptive force and position controllers for robot manipulators within the hybrid control architecuture is presented. The force controller is composed of an adaptive PID feedback controller, an auxiliary signal and a force feedforward term, and it achieves tracking of desired force setpoints in the constraint directions. The position controller consists of adaptive feedback and feedforward controllers and an auxiliary signal, and it accomplishes tracking of desired position trajectories in the free directions. The controllers are capable of compensating for dynamic cross-couplings that exist between the position and force control loops in the hybrid control architecture. The adaptive controllers do not require knowledge of the complex dynamic model or parameter values of the manipulator or the environment. The proposed control schemes are computationally fast and suitable for implementation in on-line control with high sampling rates.

Upper airway stabilization by osteopathic manipulation of the sphenopalatine ganglion versus sham manipulation in OSAS patients: a proof-of-concept, randomized, crossover, double-blind, controlled study.

Science.gov (United States)

Jacq, Olivier; Arnulf, Isabelle; Similowski, Thomas; Attali, Valérie

2017-12-20

Osteopathic manipulative treatment (OMT) of the sphenopalatine ganglion (SPG) is used empirically for the treatment of rhinitis and snoring and is thought to increase pharyngeal stability. This trial was designed to study the effects of this treatment on pharyngeal stability evaluated by critical closing pressure in obstructive sleep apnoea syndrome. This single-centre, randomized, crossover, double-blind study compared active manipulation and sham manipulation of the SPG. Randomization was computer-generated. Patients each received one active manipulation and one sham manipulation at an interval of 21 days and were evaluated 30 min and 48 h after each session administered by a qualified osteopath. Neither the patients, nor the investigator performing the evaluations were informed about the order of the two techniques (double-blind). The primary endpoint was the percentage of responding patients presenting increased pharyngeal stability defined by a variation of critical closing pressure (Pcrit) of at least -4 cmH 2 O at 30 min. Secondary endpoints were the variation of Pcrit in absolute values, sleepiness and snoring. Others endpoints were lacrimation (Schirmer's test), induced pain, sensations experienced during OMT. Ten patients were included and nine (57 [50; 58] years, comprising 7 men, with an apnoea-hypopnoea index of 31.0 [25.5; 33.2]/h; (values are median [quartiles])) were analysed. Seven patients were analysed for the primary endpoint and nine patients were analysed for secondary endpoints. Five patients responded after active manipulation versus no patients after sham manipulation (p = 0.0209). Active manipulation induced more intense pain (p = 0.0089), increased lacrimation (ns) and more tactile, nociceptive and gustatory sensations (13 versus 1) compared to sham manipulation. No significant difference was observed for the other endpoints. Osteopathic manipulative treatment of the SPG may improve pharyngeal stability in obstructive sleep

Boiler inspection manipulator for Torness Power Station

International Nuclear Information System (INIS)

Carrey, R.T.A.; Playle, M.J.

1996-01-01

In-service inspection at Torness Advanced Gas-cooled Reactor is achieved, via penetrations above and below the core area and boilers and through eight circulator penetrations for inspection of the sub-diagrid area. A manipulator is described which can access the area above the reactor core via any of these eight peripheral penetrations. The design and fabrication of the manipulator has led to innovation with a number of possible solutions being tendered. In reactor deployment of the successful design is expected in early 1997. (UK)

An Adaptable Robot Vision System Performing Manipulation Actions With Flexible Objects

DEFF Research Database (Denmark)

Bodenhagen, Leon; Fugl, Andreas R.; Jordt, Andreas

2014-01-01

system should be viewed as a library of new technologies that have been proven to work in close to industrial conditions. As a rather basic, but necessary part, we provide a technology for determining the shape of the object when passing on, e. g., a conveyor belt prior to being handled. The main......This paper describes an adaptable system which is able to perform manipulation operations (such as Peg-in-Hole or Laying-Down actions) with flexible objects. As such objects easily change their shape significantly during the execution of an action, traditional strategies, e. g., for solve path......, operating in real-time. Simulations have been used to bootstrap the learning of optimal actions, which are subsequently improved through real-world executions. To achieve reproducible results, we demonstrate this for casted silicone test objects of regular shape. Note to Practitioners-The aim of this work...

Fast and accurate edge orientation processing during object manipulation

Science.gov (United States)

Flanagan, J Randall; Johansson, Roland S

2018-01-01

Quickly and accurately extracting information about a touched object’s orientation is a critical aspect of dexterous object manipulation. However, the speed and acuity of tactile edge orientation processing with respect to the fingertips as reported in previous perceptual studies appear inadequate in these respects. Here we directly establish the tactile system’s capacity to process edge-orientation information during dexterous manipulation. Participants extracted tactile information about edge orientation very quickly, using it within 200 ms of first touching the object. Participants were also strikingly accurate. With edges spanning the entire fingertip, edge-orientation resolution was better than 3° in our object manipulation task, which is several times better than reported in previous perceptual studies. Performance remained impressive even with edges as short as 2 mm, consistent with our ability to precisely manipulate very small objects. Taken together, our results radically redefine the spatial processing capacity of the tactile system. PMID:29611804

Sporadic manipulation in money markets with central bank standing facilities

OpenAIRE

Ewerhart, Christian; Cassola, Nuno; Ejerskov, Steen; Valla, Natacha

2004-01-01

In certain market environments, a large investor may benefit from building up a futures position first and trading subsequently in the spot market (Kumar and Seppi, 1992). The present paper identifies a variation of this type of manipulation that might occur in money markets with an interest rate corridor. We show that manipulation involving the use of central bank facilities would be observable only sporadically. The probability of manipulation decreases when the central bank uses an active ...

Large remote manipulator operating and maintenance experience at IEM cell

International Nuclear Information System (INIS)

Hicks, D.F.; McGuinness, P.W.

1985-01-01

The Interim Examination and Maintenance (IEM) Cell at the Fast Flux Test Facility (FFTF) has two large Electro-Mechanical Manipulators (EMM's). These manipulators are used for cell operations (processing of reactor core components) as well as general cell maintenance. From our eleven years of operation and maintenance experience with these large EMM's, we have learned many lessons concerning manipulator design. This paper describes the IEM Cell EMM design features and discusses operating and maintenance experience at the IEM Cell

Global manipulation of digital images can lead to variation in cytological diagnosis

Directory of Open Access Journals (Sweden)

H Prasad

2011-01-01

Full Text Available Background: With the adoption of a completely electronic workflow by several journals and the advent of telepathology, digital imaging has become an integral part of every scientific research. However, manipulating digital images is very easy, and it can lead to misinterpretations. Aim: To analyse the impact of manipulating digital images on their diagnosis. Design: Digital images were obtained from Papanicolaou-stained smears of dysplastic and normal oral epithelium. They were manipulated using GNU Image Manipulation Program (GIMP to alter their brightness and contrast and color levels. A Power Point presentation composed of slides of these manipulated images along with the unaltered originals arranged randomly was created. The presentation was shown to five observers individually who rated the images as normal, mild, moderate or severe dysplasia. Weighted k statistics was used to measure and assess the levels of agreement between observers. Results: Levels of agreement between manipulated images and original images varied greatly among observers. Variation in diagnosis was in the form of overdiagnosis or under-diagnosis, usually by one grade. Conclusion: Global manipulations of digital images of cytological slides can significantly affect their interpretation. Such manipulations should therefore be kept to a minimum, and avoided wherever possible.

Three-dimensional mid-air acoustic manipulation by ultrasonic phased arrays.

Science.gov (United States)

Ochiai, Yoichi; Hoshi, Takayuki; Rekimoto, Jun

2014-01-01

The essence of levitation technology is the countervailing of gravity. It is known that an ultrasound standing wave is capable of suspending small particles at its sound pressure nodes. The acoustic axis of the ultrasound beam in conventional studies was parallel to the gravitational force, and the levitated objects were manipulated along the fixed axis (i.e. one-dimensionally) by controlling the phases or frequencies of bolted Langevin-type transducers. In the present study, we considered extended acoustic manipulation whereby millimetre-sized particles were levitated and moved three-dimensionally by localised ultrasonic standing waves, which were generated by ultrasonic phased arrays. Our manipulation system has two original features. One is the direction of the ultrasound beam, which is arbitrary because the force acting toward its centre is also utilised. The other is the manipulation principle by which a localised standing wave is generated at an arbitrary position and moved three-dimensionally by opposed and ultrasonic phased arrays. We experimentally confirmed that expanded-polystyrene particles of 0.6 mm, 1 mm, and 2 mm in diameter could be manipulated by our proposed method.

Task-oriented control of Single-Master Multi-Slave Manipulator System

International Nuclear Information System (INIS)

Kosuge, Kazuhiro; Ishikawa, Jun; Furuta, Katsuhisa; Hariki, Kazuo; Sakai, Masaru.

1994-01-01

A master-slave manipulator system, in general, consists of a master arm manipulated by a human and a slave arm used for real tasks. Some tasks, such as manipulation of a heavy object, etc., require two or more slave arms operated simultaneously. A Single-Master Multi-Slave Manipulator System consists of a master arm with six degrees of freedom and two or more slave arms, each of which has six or more degrees of freedom. In this system, a master arm controls the task-oriented variables using Virtual Internal Model (VIM) based on the concept of 'Task-Oriented Control'. VIM is a reference model driven by sensory information and used to describe the desired relation between the motion of a master arm and task-oriented variables. The motion of slave arms are controlled based on the task oriented variables generated by VIM and tailors the system to meet specific tasks. A single-master multi-slave manipulator system, having two slave arms, is experimentally developed and illustrates the concept. (author)

Development of design system of manipulator for fusion reactor maintenance

International Nuclear Information System (INIS)

Ida, Toshio; Niikura, Setsuo; Ishiguro, Akiko; Yamada, Masao; Matsuoka, Fushiki

1989-01-01

A program which supports designers of a manipulator for in-vessel maintenance of a fusion reactor has been developed. The main purpose of this program is to provide the designer with a promising manipulator specification by furnishing useful information. It combines a technique of knowledge engineering with numerical solutions. This program consists of three parts: The first part is to generate candidates for the manipulator using a knowledge base; the second is to evaluate both static and dynamic properties of each candidate through numerical simulation of the maintenance task; and the third is to select the candidates having better performance and feasibility on the basis of the simulation data and knowledge base. The feasibility of the method used in this program is confirmed by the preliminary application. This application also emphasizes the importance of the knowledge base for the candidate generation and selection. Although the degree of freedom of the manipulator is restricted to less than 7 degrees in this study, further development of the capability of manipulator simulation (seven or more degrees of freedom) will enhance the effectiveness of this program. (orig.)

Pneumatic artificial muscle actuators for compliant robotic manipulators

Science.gov (United States)

Robinson, Ryan Michael

Robotic systems are increasingly being utilized in applications that require interaction with humans. In order to enable safe physical human-robot interaction, light weight and compliant manipulation are desirable. These requirements are problematic for many conventional actuation systems, which are often heavy, and typically use high stiffness to achieve high performance, leading to large impact forces upon collision. However, pneumatic artificial muscles (PAMs) are actuators that can satisfy these safety requirements while offering power-to-weight ratios comparable to those of conventional actuators. PAMs are extremely lightweight actuators that produce force in response to pressurization. These muscles demonstrate natural compliance, but have a nonlinear force-contraction profile that complicates modeling and control. This body of research presents solutions to the challenges associated with the implementation of PAMs as actuators in robotic manipulators, particularly with regard to modeling, design, and control. An existing PAM force balance model was modified to incorporate elliptic end geometry and a hyper-elastic constitutive relationship, dramatically improving predictions of PAM behavior at high contraction. Utilizing this improved model, two proof-of-concept PAM-driven manipulators were designed and constructed; design features included parallel placement of actuators and a tendon-link joint design. Genetic algorithm search heuristics were employed to determine an optimal joint geometry; allowing a manipulator to achieve a desired torque profile while minimizing the required PAM pressure. Performance of the manipulators was evaluated in both simulation and experiment employing various linear and nonlinear control strategies. These included output feedback techniques, such as proportional-integral-derivative (PID) and fuzzy logic, a model-based control for computed torque, and more advanced controllers, such as sliding mode, adaptive sliding mode, and

STRUCTURAL AND GEOMETRICAL ANALYSIS OF THE LIFTING MANIPULATORS FOR A GREEN ENVIRONMENT

Directory of Open Access Journals (Sweden)

Ioana POPESCU

2015-12-01

Full Text Available The lifting and getting off the bins, to and from the body of special waste trucks, by some planar linkage – manipulators are studied. These lifting manipulators are equipped with gripper systems in order to load and unload the bins. Several kinematical schemas of type mono– and bi-mobile manipulators are analyzed, these being driven by one or two linear actuators. The kinematical geometry of these planar manipulators by means of scale drawing of the kinematical schema is displayed. Two solutions for a better efficiency and a green environment have been proposed. Finally, a modeling and simulation case of the lifting manipulator is presented.

Know Stroke: Know the Signs, Act in Time Video

Medline Plus

Full Text Available ... Radio PSAs » Videos and TV PSAs » Widgets » Infographics Health Professional Resources Campaign Partners Research Programs Español Research ... 830K) » Home | About the Campaign | Stroke Materials | Health Professional Resources | Campaign Partners | Research Programs | Contact | Disclaimer | Privacy | ...

Generic method for deriving the general shaking force balance conditions of parallel manipulators with application to a redundant planar 4-RRR parallel manipulator

NARCIS (Netherlands)

van der Wijk, V.; Krut, S.; Pierrot, F.; Herder, Justus Laurens

2011-01-01

This paper proposes a generic method for deriving the general shaking force balance conditions of parallel manipulators. Instead of considering the balancing of a parallel manipulator link-by-link or leg-by-leg, the architecture is considered altogether. The first step is to write the linear

Detecting the manipulation of digital clinical records in dental practice

International Nuclear Information System (INIS)

Díaz-Flores-García, V.; Labajo-González, E.; Santiago-Sáez, A.; Perea-Pérez, B.

2017-01-01

Introduction: Radiography provides many advantages in the diagnosis and management of dental conditions. However, dental X-ray images may be subject to manipulation with malicious intent using easily accessible computer software. Methods: In this study, we sought to evaluate a dentist's ability to identify a manipulated dental X-ray images, when compared with the original, using a variant of the methodology described by Visser and Kruger. Sixty-six dentists were invited to participate and evaluate 20 intraoral dental X-ray images, 10 originals and 10 modified, manipulated using Adobe Photoshop to simulate fillings, root canal treatments, etc. Results: Participating dentists were correct in identifying the manipulated image in 56% of cases, 6% higher than by chance and 10% more than in the study by Visser and Kruger. Conclusion: Malicious changes to dental X-ray images may go unnoticed even by experienced dentists. Professionals must be aware of the legal consequences of such changes. A system of detection/validation should be created for radiographic images. - Highlights: • Fraudulent manipulation of dental X-ray images creates a problem of legal security. • Dentists were able to identify manipulated images on 56% of all occasions. • 6% more than the probability of a person with no dental training. • 10% more than in the study by Visser and Kruger.

Remote control manipulator

Energy Technology Data Exchange (ETDEWEB)

Sugawara, T

1970-02-28

A prior-art remote control manipulator comprises a horizontal suspension section, a master arm and a slave arm which are coupled to ends of the suspension section in a manner to pivotally move relative to the suspension section, and a connecting device which includes a tape and which joins both the arms. When the connecting device malfunctions, the slave arm can neither be extended nor contracted. Means to keep the tension of the tape is required which restricts the extension length of the slave arm. Further, the slave arm can be moved only in the axial direction. The invention described provides an improved remote control manipulator of the specified type. A moving device which moves the slave arm relative to the master arm without the intervention of the connecting device is mounted on a movable part of the slave arm, while pulleys which maintain the joining relationship of the connecting device are mounted on the movable part and fixed part of the slave arm. Owing to this construction, movement of the slave arm is assured despite troubles which may arise in the connecting device. In addition, no slack arises in the tape. By applying a similar construction to the horizontal suspension section, the suspension section can be stretched, and hence, the slave arm can be moved in a direction orthogonal to its axis.

Introduction to autonomous manipulation case study with an underwater robot, SAUVIM

CERN Document Server

Marani, Giacomo

2014-01-01

“Autonomous manipulation” is a challenge in robotic technologies. It refers to the capability of a mobile robot system with one or more manipulators that performs intervention tasks requiring physical contacts in unstructured environments and without continuous human supervision. Achieving autonomous manipulation capability is a quantum leap in robotic technologies as it is currently beyond the state of the art in robotics. This book addresses issues with the complexity of the problems encountered in autonomous manipulation including representation and modeling of robotic structures, kinematic and dynamic robotic control, kinematic and algorithmic singularity avoidance, dynamic task priority, workspace optimization and environment perception. Further development in autonomous manipulation should be able to provide robust improvements of the solutions for all of the above issues. The book provides an extensive tract on sensory-based autonomous manipulation for intervention tasks in unstructured environment...

Beam Techniques - Beam Control and Manipulation

International Nuclear Information System (INIS)

Minty, Michiko G

2003-01-01

We describe commonly used strategies for the control of charged particle beams and the manipulation of their properties. Emphasis is placed on relativistic beams in linear accelerators and storage rings. After a brief review of linear optics, we discuss basic and advanced beam control techniques, such as transverse and longitudinal lattice diagnostics, matching, orbit correction and steering, beam-based alignment, and linac emittance preservation. A variety of methods for the manipulation of particle beam properties are also presented, for instance, bunch length and energy compression, bunch rotation, changes to the damping partition number, and beam collimation. The different procedures are illustrated by examples from various accelerators. Special topics include injection and extraction methods, beam cooling, spin transport and polarization

Beam Techniques - Beam Control and Manipulation

Energy Technology Data Exchange (ETDEWEB)

Minty, Michiko G

2003-04-24

We describe commonly used strategies for the control of charged particle beams and the manipulation of their properties. Emphasis is placed on relativistic beams in linear accelerators and storage rings. After a brief review of linear optics, we discuss basic and advanced beam control techniques, such as transverse and longitudinal lattice diagnostics, matching, orbit correction and steering, beam-based alignment, and linac emittance preservation. A variety of methods for the manipulation of particle beam properties are also presented, for instance, bunch length and energy compression, bunch rotation, changes to the damping partition number, and beam collimation. The different procedures are illustrated by examples from various accelerators. Special topics include injection and extraction methods, beam cooling, spin transport and polarization.

High-level expression of nattokinase in Bacillus licheniformis by manipulating signal peptide and signal peptidase.

Science.gov (United States)

Cai, D; Wei, X; Qiu, Y; Chen, Y; Chen, J; Wen, Z; Chen, S

2016-09-01

Nattokinase is an enzyme produced by Bacillus licheniformis and has potential to be used as a drug for treating cardiovascular disease due to its beneficial effects of preventing fibrin clots etc. However, the low activity and titre of this protein produced by B. licheniformis often hinders its application of commercial production. The aim of this work is to improve the nattokinase production by manipulating signal peptides and signal peptidases in B. licheniformis. The P43 promoter, amyL terminator and AprN target gene were used to form the nattokinase expression vector, pHY-SP-NK, which was transformed into B. licheniformis and nattokinase was expressed successfully. A library containing 81 predicted signal peptides was constructed for nattokinase expression in B. licheniformis, with the maximum activity being obtained under the signal peptide of AprE. Among four type I signal peptidases genes (sipS, sipT, sipV, sipW) in B. licheniformis, the deletion of sipV resulted in a highest decrease in nattokinase activity. Overexpression of sipV in B. licheniformis led to a nattokinase activity of 35·60 FU ml(-1) , a 4·68-fold improvement over activity produced by the initial strain. This work demonstrates the potential of B. licheniformis for industrial production of nattokinase through manipulation of signal peptides and signal peptidases expression. This study has screened the signal peptides of extracellular proteins of B. licheniformis for nattokinase production. Four kinds of Type I signal peptidases genes have been detected respectively in B. licheniformis to identify which one played the vital role for nattokinase production. This study provided a promising strain for industry production of nattokinase. © 2016 The Society for Applied Microbiology.

Electron spin and nuclear spin manipulation in semiconductor nanosystems

International Nuclear Information System (INIS)

Hirayama, Yoshiro; Yusa, Go; Sasaki, Satoshi

2006-01-01

Manipulations of electron spin and nuclear spin have been studied in AlGaAs/GaAs semiconductor nanosystems. Non-local manipulation of electron spins has been realized by using the correlation effect between localized and mobile electron spins in a quantum dot- quantum wire coupled system. Interaction between electron and nuclear spins was exploited to achieve a coherent control of nuclear spins in a semiconductor point contact device. Using this device, we have demonstrated a fully coherent manipulation of any two states among the four spin levels of Ga and As nuclei. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Living PSA issues in France on pressurized water reactors

International Nuclear Information System (INIS)

Dewailly, J.; Deriot, S.; Dubreuil Chambardel, A.; Francois, P.; Magne, L.

1993-09-01

Two Probabilistic Safety Assessments (PSAs) carried out in France on 900 and 1300 MWe Pressurized Water Reactor units ended in 1990. These PSAs determined the core damage frequency for all plant operating conditions ranging from cold shutdown for refuelling to full power operation. Since 1990, these PSAs have been used increasingly as tools for applications such as accident precursor analysis, risk-based Technical Specifications, and maintenance optimization. In turn, these applications are used to enhance the initial PSAs. The notion of a ''living'' PSA which can be used and updated is slowly taking form. The accident precursor analysis consists in applying PSA event trees to obtain quick information on the potential consequences of a precursor event and on the corresponding probabilities of occurrence. A feedback on PSAs is provided by comparing them with actual operating incidents. The computation of the allowed outage time during power operation, based on the computerized models of Probabilistic Safety Assessments, requires adjustments: calculation of hourly risk of core damage under different reactor conditions without equipment unavailabilities. The proposed method also turns out to be an aid in determining the safe shutdown condition and procedure. Furthermore, when introducing a sufficient level of detail, PSA reliability models make it possible to compute contributions and to perform sensitivity studies in order to highlight those components for which a maintenance effort should be made. From the experience acquired up to now, there was felt to be a strong need to create guidelines for using PSAs that would simplify their implementation by the experts in charge of determining Technical Specifications, of maintenance programs, etc. who are not generally specialists in PSAs. For this purpose, it is necessary to improve the intelligibility of the models made in order for them to be used and to offer user's guides adapted to each application. Documents

Basic conceptions for reactor pressure vessel manipulators and their evaluation

International Nuclear Information System (INIS)

Popp, P.

1987-01-01

The study deals with application fields and basic design conceptions of manipulators in reactor pressure vessels as well as their evaluation. It is shown that manipulators supported at the reactor flange have essential advantages

Dynamic Modelling for Planar Extensible Continuum Robot Manipulators

Science.gov (United States)

2006-01-01

to the OCTARM continuum ma- nipulator. The OCTARM manipulator is a biologically inspired soft robot manipulator resembling an elephant trunk or an... octopus arm [18]. The OCTARM, shown in Figure 1, is a three-section robot with nine degrees of freedom. Aside from two axis bending with constant...increasing interest in designing �biologically inspired � continuum robots . Some of these designs are mimicking trunks [8], [25], tentacles [17], [21], [24