WorldWideScience

Sample records for industry issues management

  1. Risk Management: An Analysis of Issues in Islamic Financial Industry (Occasional Paper)

    OpenAIRE

    Khan, Tariqullah; Ahmed, Habib

    2001-01-01

    The paper discusses a number of risk management issues of the Islamic financial industry. It outlines the risk management processes and techniques that enable financial institutions to control undesirable risks and to take benefit of the business opportunities created by the desirable ones.

  2. Harmonization of industrial and oilfield waste management issues in Alberta

    International Nuclear Information System (INIS)

    Halla, S.

    1999-01-01

    There has been an ongoing discussion concerning the harmonization of waste management requirements within Alberta between the Alberta Energy and Utilities Board (EUB) and Alberta Environment (AENV), with the ultimate goal of publishing a memorandum of understanding (MOU) that will lay out the division of responsibilities between the two authorities on this matter. An overview is included of waste management in Alberta and of the harmonization agreements attained to date, with a stress on oil field waste issues. The EUB and AENV developed a MOE on the harmonization of waste management in Alberta, and a discussion is made of the concept of equivalency, which is used in the development of 'EUB guide 58: oilfield waste management requirements for the upstream petroleum industry' and will be a guiding principle for the MOU. Although the EUB's processes for waste management will not be exactly the same as AENV's, the EUB has made the commitment that, as a minimum, the requirements will provide the same level of environmental protection and public safety equivalent to that provided by AENV

  3. Waste management issues, a set of technologies

    International Nuclear Information System (INIS)

    Gautrot, J.J.

    2000-01-01

    As any other industry, nuclear fuel cycle back-end raises the major issue of waste management. In France, spent fuel is considered as valuable materials and only the ultimate waste are considered as actual waste. Accordingly, waste issue is as follows: a sorting out has to be done, in order to separate valuable materials from actual wastes, put any outlet flow under a stable form and condition them appropriately to their respective recycling or disposal routes. This implies the implementation of a comprehensive set of technologies. Actually, it is an industrial reality, as the COGEMA Group has for a long time set up a reprocessing and conditioning strategy in its plants. Waste management issues are common to many activities. European as well as French regulators already introduced the twofold necessity to reduce waste volumes, and to dispose of only ''ultimate waste'' as concerns industrial and household waste mainly. In this objective, French nuclear reprocessing and recycling industry may be seen as a breeding ground of well-proven technologies and management options. Actually, processes used can also give an answer to such different issues as excess plutonium immobilization, sites cleaning up (including for instance treatment of the liquid HLW legacy), dismantling wastes management. There are a number of operations to be dealt with worldwide that will find a solution in any of the technologies implemented and optimized in COGEMA facilities. Based on the COGEMA Group know-how, the present paper will describe those technologies and explain how they can solve the other stringent waste management issues worldwide. (author)

  4. Issues in Coastal Zone Management.

    Science.gov (United States)

    Davis, Derrin

    1992-01-01

    Addresses the following issues relevant to coastal zone management: overcrowding, resource exploitation, pollution, agriculture, fisheries, industrial, and other uses. Describes conflicts and trade-offs in management typified by fragmented agency decision making. Discusses implications of the greenhouse effect, sustainable development, and the…

  5. Industry activities to resolve utility procurement issues

    International Nuclear Information System (INIS)

    Rosch, F.

    1993-01-01

    There are several industry organizations which are active in assisting the utilities in their equipment procurement enhancement. They include the Nuclear Management Resources Council (NUMARC), the Electric Power Research Institute (EPRI), and the Nuclear Procurement Issues Committee (NUPIC). The products include the NUMARC Procurement Initiatives, EPRI procurement related guidelines and databases, and NUPIC joint audits and commercial grade surveys. The industry procurement activities and products are reviewed, and their use by utilities to enhance their procurement process is related. 1 fig

  6. Hospitality Management: Perspectives from Industry Advisor

    Directory of Open Access Journals (Sweden)

    Rachel Roginsky

    2013-07-01

    Full Text Available In prior quarterly reports, Pinnacle Advisory Group presented timely updates about the New England lodging industry, which included focused profiles on particular cities. In this issue, the firm offers more general insight about the hospitality industry. Several Pinnacle executives recently participated in a panel discussion about investment, management, and careers in the hospitality industry.

  7. Industry characteristics management of innovative processes at the enterprises of light industry

    OpenAIRE

    Yusupov, Ulugbek

    2015-01-01

    This article considers the issues of innovative development and management of innovative processes in the knitting industry of Uzbekistan. Analyzed the main directions of innovative processes and provides recommendations for their management.

  8. THOSE ISSUES AND MANAGEMENT ACCOUNTING PRINCIPLES IN THE ORGANIZATION ENTITIES MILK INDUSTRY

    Directory of Open Access Journals (Sweden)

    GEORGETA-MIHAELA ZAHARIA (CRIVAC

    2010-01-01

    Full Text Available This paper aims to highlight the features of the entities in the dairy industry. At first, a brief description of the dairy industry in Romania, giving priority factors that contribute to the development of this market. As in any economic unit, organization of management accounting and cost calculation is particularly important activity managers are required to study all factors and exercise influence principles, their implications, and then, taking account of them to choose the most appropriate form of organization of management accounting and cost calculation. Were analyzed and described in the study, factors and principles that characterize the entities in the dairy industry and have an influence in the organization of management accounting, but also in determining costs.

  9. Relationship between time management in construction industry and project management performance

    Science.gov (United States)

    Nasir, Najuwa; Nawi, Mohd Nasrun Mohd; Radzuan, Kamaruddin

    2016-08-01

    Nowadays, construction industry particularly in Malaysia struggle in achieving status of eminent time management for construction project. Project managers have a great responsibility to keep the project success under time of project completion. However, studies shows that delays especially in Malaysian construction industry still unresolved due to weakness in managing the project. In addition, quality of time management on construction projects is generally poor. Due to the progressively extended delays issue, time performance becomes an important subject to be explored to investigate delay factors. The method of this study is review of literature towards issues in construction industry which affecting time performance of project in general by focusing towards process involved for project management. Based on study, it was found that knowledge, commitment, cooperation are the main criteria as an overall to manage the project into a smooth process during project execution until completion. It can be concluded that, the strength between project manager and team members in these main criteria while conducting the project towards good time performance is highly needed. However, there is lack of establishment towards factors of poor time performance which strongly related with project management. Hence, this study has been conducted to establish factors of poor time performance and its relations with project management.

  10. Need of risk management practice amongst bumiputera contractors in Malaysia construction industries

    Science.gov (United States)

    Syuhada Fadzil, Nur; Noor, Nurazuwa Md; Rahman, Ismail Abdul

    2017-11-01

    Malaysia construction industry has been growing continuously with double-digit growth for the past two decades. There are many issues surrounded the industry such as delay in delivery, cost overrun, quality and safety. In bumiputera contractor’s context, the literature review found that 32 issues were encountered in the construction project. These issues can be handled properly with the application of risk management. According to previous researchers, application of risk management in Malaysia construction industry is at the low level where it is implemented in traditional ways that are brainstorming and checklist. These were due to lack of knowledge, the high cost of hiring experts and avoiding extra cost. Besides that, this study also intentions to analyse the risk categories in the construction industry as well as identify risk management process to resolve the construction issues. Hence, this paper presents issues engulfed by Bumiputera contractors which can partly be resolved by applying risk management practice in carrying out the construction activity. This may inspire the contractors to apply the risk management practice in ensuring the success of their construction project.

  11. Supply Chain Management on IBS Implementation in Klang Valley Construction Industry: Challenges and Issues

    Science.gov (United States)

    Azrizal Fauzi, Mohd; Hasim, Sulaiman; Awang, Anizah; Ridzuan, Ahmad Ruslan Mohd; Nur Yunus, Juzailah

    2017-12-01

    Industrialized Building System (IBS) is a system where the components of the building are manufactured in a factory and it will be transported to the site to form the structures. The supply chain management (SCM) is a system where the delivery flows of the IBS products from manufacturers to the site. The aim of this research is to identify the major challenges and to analyze the issues on IBS implementation in SCM in Klang Valley from the manufacturers perspective. The methodology used in this paper is based on primary data through questionnaire and interview. Questionnaires were sent to the Manufacturers. It can be concluded that this paper attempts to present more on the challenges and issues that those companies of manufacturers faced during their success journey in finding integration in their supply chain. The main contributions of this paper are integrating all the supply chain integration challenges and issues on IBS. Therefore, these contributions will be helpful for the organization of manufacturers and IBS players that establish the integration in their SCM.

  12. Economic aspects of management of oil industry

    International Nuclear Information System (INIS)

    Purina, I.; Sipkovs, P.

    1997-01-01

    Oil industry is characterised by huge and long-term capital investments. This is one of the most specific features of the industry which has to be taken into account during the preparation of oil industry management framework by the state institutions. This article covers specific issues of cash flows and risks intrinsic in the oil industry projects as well as economic instruments to be applied. (author)

  13. Tobacco industry issues management organizations: Creating a global corporate network to undermine public health

    Science.gov (United States)

    McDaniel, Patricia A; Intinarelli, Gina; Malone, Ruth E

    2008-01-01

    Background The global tobacco epidemic claims 5 million lives each year, facilitated by the ability of transnational tobacco companies to delay or thwart meaningful tobacco control worldwide. A series of cross-company tobacco industry "issues management organizations" has played an important role in coordinating and implementing common strategies to defeat tobacco control efforts at international, national, and regional levels. This study examines the development and enumerates the activities of these organizations and explores the implications of continuing industry cooperation for global public health. Methods Using a snowball sampling strategy, we collected documentary data from tobacco industry documents archives and assembled them into a chronologically organized case study. Results The International Committee on Smoking Issues (ICOSI) was formed in 1977 by seven tobacco company chief executives to create common anti-tobacco control strategies and build a global network of regional and national manufacturing associations. The organization's name subsequently changed to INFOTAB. The multinational companies built the organization rapidly: by 1984, it had 69 members operating in 57 countries. INFOTAB material, including position papers and "action kits" helped members challenge local tobacco control measures and maintain tobacco-friendly environments. In 1992 INFOTAB was replaced by two smaller organizations. The Tobacco Documentation Centre, which continues to operate, distributes smoking-related information and industry argumentation to members, some produced by cross-company committees. Agro-Tobacco Services, and now Hallmark Marketing Services, assists the INFOTAB-backed and industry supported International Tobacco Growers Association in advancing claims regarding the economic importance of tobacco in developing nations. Conclusion The massive scale and scope of this industry effort illustrate how corporate interests, when threatened by the globalization of

  14. Tobacco industry issues management organizations: creating a global corporate network to undermine public health.

    Science.gov (United States)

    McDaniel, Patricia A; Intinarelli, Gina; Malone, Ruth E

    2008-01-17

    The global tobacco epidemic claims 5 million lives each year, facilitated by the ability of transnational tobacco companies to delay or thwart meaningful tobacco control worldwide. A series of cross-company tobacco industry "issues management organizations" has played an important role in coordinating and implementing common strategies to defeat tobacco control efforts at international, national, and regional levels. This study examines the development and enumerates the activities of these organizations and explores the implications of continuing industry cooperation for global public health. Using a snowball sampling strategy, we collected documentary data from tobacco industry documents archives and assembled them into a chronologically organized case study. The International Committee on Smoking Issues (ICOSI) was formed in 1977 by seven tobacco company chief executives to create common anti-tobacco control strategies and build a global network of regional and national manufacturing associations. The organization's name subsequently changed to INFOTAB. The multinational companies built the organization rapidly: by 1984, it had 69 members operating in 57 countries. INFOTAB material, including position papers and "action kits" helped members challenge local tobacco control measures and maintain tobacco-friendly environments. In 1992 INFOTAB was replaced by two smaller organizations. The Tobacco Documentation Centre, which continues to operate, distributes smoking-related information and industry argumentation to members, some produced by cross-company committees. Agro-Tobacco Services, and now Hallmark Marketing Services, assists the INFOTAB-backed and industry supported International Tobacco Growers Association in advancing claims regarding the economic importance of tobacco in developing nations. The massive scale and scope of this industry effort illustrate how corporate interests, when threatened by the globalization of public health, sidestep competitive

  15. Tobacco industry issues management organizations: Creating a global corporate network to undermine public health

    Directory of Open Access Journals (Sweden)

    Malone Ruth E

    2008-01-01

    Full Text Available Abstract Background The global tobacco epidemic claims 5 million lives each year, facilitated by the ability of transnational tobacco companies to delay or thwart meaningful tobacco control worldwide. A series of cross-company tobacco industry "issues management organizations" has played an important role in coordinating and implementing common strategies to defeat tobacco control efforts at international, national, and regional levels. This study examines the development and enumerates the activities of these organizations and explores the implications of continuing industry cooperation for global public health. Methods Using a snowball sampling strategy, we collected documentary data from tobacco industry documents archives and assembled them into a chronologically organized case study. Results The International Committee on Smoking Issues (ICOSI was formed in 1977 by seven tobacco company chief executives to create common anti-tobacco control strategies and build a global network of regional and national manufacturing associations. The organization's name subsequently changed to INFOTAB. The multinational companies built the organization rapidly: by 1984, it had 69 members operating in 57 countries. INFOTAB material, including position papers and "action kits" helped members challenge local tobacco control measures and maintain tobacco-friendly environments. In 1992 INFOTAB was replaced by two smaller organizations. The Tobacco Documentation Centre, which continues to operate, distributes smoking-related information and industry argumentation to members, some produced by cross-company committees. Agro-Tobacco Services, and now Hallmark Marketing Services, assists the INFOTAB-backed and industry supported International Tobacco Growers Association in advancing claims regarding the economic importance of tobacco in developing nations. Conclusion The massive scale and scope of this industry effort illustrate how corporate interests, when

  16. Project and Production Management in the Construction Industry

    OpenAIRE

    Chien-Ho Ko

    2012-01-01

    In this issue, the Journal of Engineering, Project, and Production Management (EPPM-Journal) presents five original research papers related to project and production management in the construction industry from authors in Africa, Asia, and Europe.

  17. Ceramic transactions: Environmental and waste management issues in the ceramic industry. Volume 39

    International Nuclear Information System (INIS)

    Mellinger, G.B.

    1994-01-01

    A symposium on environmental and waste management issues in the ceramic industry took place in Cincinnati, Ohio, April 19-22, 1993. The symposium was held in conjunction with the 95th Annual Meeting of the American Ceramic Society and was sponsored by the Ceramic Manufacturing Council, Legislative and Regulatory Affairs Committee with the Glass and Optical Materials, Basic Science, Cements, Nuclear, Refractory Ceramics, Structural Clay Products, Whitewares, Design, Electronics, Engineering Ceramics, and Materials and Equipment Divisions. This volume documents several of the papers that were presented at the symposium. Papers presented in this volume are categorized under the following headings: vitrification of hazardous and mixed wastes; waste glass properties and microstructure; processing of nuclear waste disposal glasses; waste form qualification; glass dissolution: modeling and mechanisms; systems and field testing of waste forms

  18. Historic town centre management - The real estate industry

    Directory of Open Access Journals (Sweden)

    Ciubotaru Mihai

    2018-01-01

    Full Text Available In modern times, many of the socio-economic aspects of our lives (beside the classical understanding of the term industry “evolved(?” into industries: music, arts in general, sports, education, health....have become professionally managed industries. Historical town centres provide goods and services and, in this context, can be regarded as industries, as a whole. All the elements of an industry can be identified in these complex “places”: provision of goods and services, human resources issues, technology, marketing, regulatory and legal aspects, management...all of which pointing towards an approach that needs to be looked at as such. The most important industry in hist oric town centres is the real estate industry.

  19. Future industrial issues for ANDRA

    International Nuclear Information System (INIS)

    Auverlot, D.

    1998-01-01

    ANDRA manages industrially 90 % in volume of radioactive waste produced in France. This is short life waste of low and medium activity. In compliance with the law of 1991, which transformed it into a public body with an industrial and commercial character, ANDRA also heads aspect 2 of the research into the 10 % of remaining highly active long life waste, by attempting to evaluate the possibilities of storing it in deep geological layers, either reversibly or irreversibly. The industrial issues of the future for ANDRA can be in different forms, following three meeting of major importance for ANDRA and for the producers of nuclear waste. These are: the meeting of 2006, at the end of which, in compliance with the law of 1991, the Parliament must re-examine the question of the management of highly active, long life waste; the renewal of nuclear facilities; the future meeting concerning future generations. However, whatever these different stage and whatever the different types of waste considered, the single and major challenge with which ANDRA is confronted is to prove that it is capable of providing a sure danger-free management of all radioactive waste. In this context, it appears necessary, today, to intensify research into aspects 1 and 3 of the law of 1991, to respect the balance of the three aspects. This in fact constitutes an essential pledge of the credibility of the procedure instituted by the law: at present, to clearly specify the research into surface storing in the short or long terms; building the three laboratories, the authorization for which has been subject to public inquiry. And also to keep, for 2006, the largest possible choice of the geological environment. (author)

  20. Product waste in the automotive industry : Technology and environmental management

    NARCIS (Netherlands)

    Groenewegen, Peter; Hond, Frank Den

    1993-01-01

    In this article the changes in technology and industry structure forced by waste management in the automotive industry are explored. The analysis is based on (1) a characterisation of corporate response to environmental issues, and (2) the management of technology applied to the car manufacturing

  1. Importance of marketing management in the world pfarmaceutical industry

    Directory of Open Access Journals (Sweden)

    Dragan Kesič

    2008-07-01

    Full Text Available The world pharmaceutical industry has changed tremendously in the last decade. Globalization processes reinforce a consolidation of the world pharmaceutical industry. Mergers and acquisitions prevail more and more as a strategic orientation of numerous world pharmaceutical companies. In our research we found out that marketing management has been playing an increasingly important or even a crucial role in day-today activities and strategic business operations of the world pharmaceutical companies. We may point out that a rapid consolidation of the world pharmaceutical industry is definitely a market-driven process, one conditioned by typical strategic marketing management issues, such as a lack of brand new products, intense competitiveness, globalization processes, increased global marketing and sales activities, changing structure of global competitors as well as a furious fight for global market shares and customers’ loyalty. We estimate that marketing management is to play an even more important and, especially, the top priority strategic role in the future globalization and concentration processes of the world pharmaceutical industry. Some experiences and lessons from the global perspective of the world pharmaceutical industry could also be useful to the management of pharmaceutical companies in the transition countries of the Central and Eastern European region. Taking into consideration the current market position of these companies, some marketing management guidelines for their marketing management policies and strategies could be suggested. We conclude that underestimating, or even complete neglect of the importance of marketing management issues may pose the greatest threat to the future strategic orientation and performance of the world pharmaceutical industry.

  2. Extraction of human factors issues caused by application of the advanced HSI technology and development of human factor issue management system

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Sang Moon; Lee, Jung Woon; Park, Jae Chang; Oh, In Seok [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-01-01

    A comprehensive literature survey was performed in this study to collect human performance issues related to the advanced HSI design features. The literature from not only nuclear industry but also other industries was collected and reviewed. The issues were categorized into the following advanced HSI design features: devices characteristics, levels of automation, information design and management, display management, computerized controls, alarm systems, computerized procedures, staffing and crew coordination, and operator support systems. The classified issues were described with the description framework. Then, the relationship of issues to HSI design process such as human factors analyses, human factors design, and human factors verification and validation was investigated. Finally, the issue management system of server-client environment was developed using Microsoft's Active Server Page technology and Access 97. (author). 18 refs., 6 figs.

  3. Solar technology and the insurance industry: Issues and applications

    Energy Technology Data Exchange (ETDEWEB)

    Deering, A.; Thornton, J. P.

    1999-07-01

    Today's insurance industry strongly emphasizes developing cost-effective hazard mitigation programs, increasing and retaining commercial and residential customers through better service, educating customers on their exposure and vulnerabilities to natural disasters, collaborating with government agencies and emergency management organizations, and exploring the use of new technologies to reduce the financial impact of disasters. Solar technology can be used in underwriting, claims, catastrophe response, loss control, and risk management. This report will address the above issues, with an emphasis on pre-disaster planning and mitigation alternatives. It will also discuss how energy efficiency and renewable technologies can contribute to reducing insurance losses and offer suggestions on how to collaborate with the utility industry and how to develop educational programs for business and consumers.

  4. Optimizing inventory management in the insulation manufacturing industry

    DEFF Research Database (Denmark)

    Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

    2016-01-01

    Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between...... service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. This paper contributes with empirical research within operations management in a sector which has not been...

  5. Dynamic operational risk management at industrial irradiation plants

    International Nuclear Information System (INIS)

    Wieland, Patricia; Lustosa, Leonardo J.

    2010-01-01

    Although feasibility studies indicate that industrial irradiation can be sound business, some initiatives fail in few years. In Brazil, the operation of some industrial irradiation plants has been discontinued in spite of the growing export market for tropical fruits like mangoes and papayas, of which Brazil is one of the major producers. This paper discusses the overall aspects of the food irradiation in Brazil, singles out dynamic operation risk management as an important need and provides suggestions for further developments. This research work involves literature review as well as interviews with irradiation industry stake holders in order to identify the ORs and to assess the situation in a logical and integrated way. The results show that public acceptance is not a major issue for the food preservation industry in Brazil. On the contrary, evidences show that there is public support, provided that information on the subject is disseminated among consumers. Need for improvements have been detected in the areas of industrial operational risk management, external relations for export, and regulatory issues, among others to support decision making in establishing and developing industrial food irradiation capabilities to serve Brazilian tropical fruit exports. (author)

  6. Challenges and Issues in Knowledge Management

    DEFF Research Database (Denmark)

    "Challenges and Issues in Knowledge Management" - the fifth volume in the "Research on Management Consulting" series - presents sixteen chapters that explore these various perspectives, focusing on knowledge management within the context of the management consulting industry, the dynamics...... associated with knowledge sharing and dissemination, methodological approaches to studying knowledge in organizations, and reflections on knowledge management and management consulting. As the chapters underscore, it is important to ensure that KM initiatives are aligned with the needs of the organization...... and its members, that the KM system is "owned" by organizational members with particular emphasis on executive sponsorship and team member acceptance, and that it be understood as an ongoing process rather than simply another management objective or faddish consulting tool. The focus, therefore, should...

  7. Engineering structural integrity issues in the pulp and paper industry

    International Nuclear Information System (INIS)

    Garner, A.; Singbeil, D.

    2002-01-01

    ESI issues for Pulp and Paper (P and P) plant are reviewed. Five typical processes are covered, namely: Chemical Pulping, Bleaching, Chemical Recovery, Mechanical Pulping and Papermaking. Equipment, chemical environments and failure modes are summarized with examples from each process. Pressure, temperature, corrosion and rotation are typical sources of risk, which is managed by appropriate inspection. The nature of the P and P Industry and its technology supply is summarized: current trends are consolidation and outsourcing. Three examples are presented to illustrate typical ESI issues: deaerator cracking where the P and P Industry alerted others to this serious cross-industry problem; pressure vessel safety factors and inconsistent international codes; and caustic cracking in continuous kraft digesters, which required rapid and concerted action to diagnose and control. In the future better predictability, data-bases, more formal risk based inspection and fitness-for-service assessments are envisaged. (author)

  8. Human Resource Management Practice Tourism and Hotel Industry

    Directory of Open Access Journals (Sweden)

    Al Hrou S.A.

    2014-01-01

    Full Text Available Due to the importance of human resources management (HRM in promoting competitiveness in tourism and hotel industry, this review intend to enhance the understanding of practical issues of HRM more importantly since it involve organizing the management of human resources, with respect to accomplishment of organizational objective further more it shows that the issues either related to external factors, which include technological change, legislation and regulation, and national culture, globalization, or internal factors including size, industry and sector characteristic and structure of an organization, strategy and past practice of HRM. On the issue of human resources capability training, this research review recommend provision of array of opportunity for capability building and conducive working environment to promote productivity. Also worth considering, employee, employer relationship, Other variables such as attitude and productivity of employees, relationship between employees and employers, increase and decrease in financial assets should be taken into account.

  9. Management, restructuring and industrial relations : organizational change within the United Kingdom broadcasting industry, 1979-2002

    OpenAIRE

    Quinn, Brian J.

    2007-01-01

    In the past decade researchers began to remedy a literature deficit in the study of broadcasting institutions – addressing in particular the issues of labour process, restructuring and industrial relations. This thesis which considers management change, industrial relations and restructuring within the United Kingdom (‘UK’) broadcasting industry employs a case study format with a view to highlighting the variations of industry (macro) and firm (micro) based restructuring. Organizational chang...

  10. MANAGEMENT OF ECONOMIC AND FINANCIAL STRATEGY INDUSTRIAL CORPORATION

    Directory of Open Access Journals (Sweden)

    K. B. Dobrova

    2010-01-01

    Full Text Available Issues related to creation of tools making it possible to efficiently control financial and economic production capability of industrial corporations making part of Russian military-industrial complex are discussed on example of an aviation enterprise. A system of balanced indicators is proposed to be used to develop corporation’s adaptive management strategies.

  11. Information Systems Management: an Australian view of the key issues

    Directory of Open Access Journals (Sweden)

    Graham Pervan

    1994-05-01

    Full Text Available Studies investigating the key issues in IS management serve to better understand the concerns of IS managers and help to guide IS researchers in choosing IS management problems worthy of investigation. This paper presents results from a study of the key issues facing the IS managers of Australia's largest 300 organisations which is part of a three-yearly longitudinal study. In order to gain consensus on the relative importance of the key issues, a three-round Delphi method was applied. The results reveal that IS strategic planning continues to be the paramount issue in our industry, as are many issues associated with IS strategic planning, including responsiveness of the IT infrastructure, effective use of the data resource, IS for competitive advantage, and a comprehensive information architecture. A greater emphasis on quality is also revealed in highly rated issues such as effective use of the data resource, data integrity and quality assurance, and the quality of software development

  12. Issues in the management of low-level radioactive wastes

    International Nuclear Information System (INIS)

    Ashbrook, A.W.

    1984-01-01

    All industry finds itself today enmeshed in a morass of regulation, political apathy and public antagonism when it comes to hazardous industrial waste. Our industry is a world-class leader on all three fronts. There are no disposal facilities in Canada for radioactive wastes and the prognosis for the future is bleak. As the industry gets older, more and more facilities will be closed and require decommissioning. New facilities require plans for the long-term management of their wastes. Indeed, one major public issue with the nuclear industry is the fate of the wastes produced. In looking at the situation in which we find ourselves today with respect to the long-term management of naturally-occurring low-level radioactive wastes, one must wonder where we are going in the future, and whether indeed is an end in sight

  13. Optimizing inventory management in the insulation manufacturing industry

    OpenAIRE

    Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

    2016-01-01

    Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. T...

  14. A Systems Engineering Approach to Address Human Capital Management Issues in the Shipbuilding Industry

    National Research Council Canada - National Science Library

    Todd, Hal M; Parten, Douglas S

    2008-01-01

    .... This study investigated current DoD Human Capital Management (HCM) strategies for attracting, developing, retaining, and managing competencies and intellectual resources for science and engineering talent within the shipbuilding industry...

  15. Current situation and countermeasures of the defense technology industry intellectual property management

    International Nuclear Information System (INIS)

    Fan Fei

    2014-01-01

    In Defense technology industry is a strategic industry of our country, is an important foundation for China to achieve modernization of national defense, is also important driving force of our national economy. Intellectual property plays a very important role in the defense industry ' strengthen the basis of capacity, combining military and civilian, leapfrog development' strategy. Defense-related science, technology and industry advanced nature of intellectual property management and its ownership is a direct reflection of the capability of independent innovation and sustainable development of the defense industry. Therefore, how to make the effective protection and management of intellectual property rights in the Defense Industry has also become a new issue that we face. In this paper, by analyzing the status of the defense technology industry intellectual property management, at home and abroad, and other industry advanced experience in intellectual property management, put forward recommendations to strengthen our national defense science and technology industry intellectual property management. (author)

  16. Selected aspects of the supply chain management in the aerospace industry

    Directory of Open Access Journals (Sweden)

    Ivan KOBLEN

    2013-03-01

    Full Text Available The paper in the introductory part underlines some factors concerning the aerospace supply chain management (SCM issue. Authors inform on selected definitions in this topic, levels of supply chain and its maturity. The authors are focusing on introducing of the explanation of main specifics of SCM in aerospace industry (original equipment manufacturer, processes and requirements for the suppliers selection and subsequently inform on the role and mission of selected international organizations involved in aerospace SCM and quality issues, namely The Aerospace and Defence Industries Association of Europe (ASD, International Aerospace Quality Group (IAQG and European Aerospace Quality Group (EAQG. The information on Quality Management System in the framework of aerospace industry and SCM are also introduced. The part of paper is dealing with information systems useful in the SCM (the Digital Product Chain and Enterprise Resource Planning. The last part of paper is focused on issue concerning the success factors for SCM in the aerospace industry. In the conclusion part the authors emphasize some aspects and factors regarding the aerospace SCM and summarize the key challenges in the area of SCM in the aerospace industry.

  17. E-Business Developmental Issues in the Australian Food Industry

    Directory of Open Access Journals (Sweden)

    Mohini Singh

    2004-11-01

    Full Text Available This paper discusses e-business developmental issues in the Australian Food industry that were identified from a research project funded by the Australian Research Council. Data was gathered from interviews with 11 food organisations in the year 2000, most of which can be classified as ‘bricks and clicks’. These 11 companies were traditional businesses that had adopted e-business as a new way of doing business. The findings of the paper highlight the fact that the B2B is the predominant e-business model in the Australian Food Industry, EDI is an important foundation technology platform for developing B2B e-business, e-procurement was an important reason for adopting B2B e-business and improved supply chain management was the most important achievement from E-Business for these organizations. It also highlighted the fact e-business developed in-house with an IT department managed e-business sites better than those that outsourced the development.

  18. Key management issue in SCADA networks: A review

    Directory of Open Access Journals (Sweden)

    Abdalhossein Rezai

    2017-02-01

    Full Text Available Supervisory Control And Data Acquisition (SCADA networks have a vital role in Critical Infrastructures (CIs such as public transports, power generation systems, gas, water and oil industries, so that there are concerns on security issues in these networks. The utilized Remote Terminal Units (RTUs and Intelligence Electronic Devices (IEDs in these networks have resource limitations, which make security applications a challenging issue. Efficient key management schemes are required besides lightweight ciphers for securing the SCADA communications. Many key management schemes have been developed to address the tradeoff between SCADA constrain and security, but which scheme is the most effective is still debatable. This paper presents a review of the existing key management schemes in SCADA networks, which provides directions for further researches in this field.

  19. Equity issues in radioactive waste management

    International Nuclear Information System (INIS)

    Kasperson, R.E.

    1984-01-01

    The 15 papers in this book deal with the equity issues of locus, legacy and labor/laity as they occur in the nuclear industry's handling of radioactive wastes. The intent is to identify and clarify inequities in alternative approaches to radioactive waste management in a way that will inform current public policy deliberations and planning. The papers are arranged in five parts which put the problem in perspective, then define the locus, the legacy, and the labor problem, and conclude with a set of proposals for a more equitable management. A separate abstract was prepared for each of the 15 chapters selected for INS, EDB, and EPA

  20. Meditation as a management tool for the pipeline industry

    Energy Technology Data Exchange (ETDEWEB)

    Terrell, M. [Wildrose Wholistic Clinic, Calgary, AB (Canada); Stripling, T.E. [KBR, Houston, TX (United States)

    2004-07-01

    This paper described the significant impact that meditation can have on a pipeline project and company management in general. It was noted that project managers tend to address organization and mechanical issues in promoting innovation and creativity. As such, the use of meditation is a leading edge concept in advanced management tools. This paper presented a practical and functional meditation approach. The foundation of meditation was described as being a mind-body state where there is alert awareness, sensory inversion, coherence in the brain and deep relaxation that give individual's access to the subconscious mind where the well of creativity is to be found. It was suggested that the use of meditation can be used in the pipeline industry as an effective tool to address soft management issues such as project team stress reduction, enhanced teamwork, increased innovation and improved decision making. It was concluded that as a soft technology, meditation has great potential to become more prominent as progressive industries look for ways to promote creativity and well-being. 14 refs.

  1. Integrated, regional approach to risk management of industrial systems

    International Nuclear Information System (INIS)

    Chakraborty, S.

    1992-01-01

    This paper focuses on the following four main issues: (1) necessity for an integrated, regional approach to risk management of industrial systems; (2) principles of risk management; (3) integrated approach and overall methodology; and (4) implementation of risk management strategies on a regional basis. The U.N. Interagency project on risk management for large industrial areas, which is a pioneer type of international initiative for an integrated approach to risk management, is discussed in this context. Another encouraging activity for further development of overall methodologies for risk management is the ongoing project on the risk and safety of technical systems at the Swiss Federal Institute of Technology in Aurich. The concept of integral risk management takes into account multidimensional factors including technical, economic, political, social, and ethical considerations to allow a well-balanced decision-making process

  2. Coordination among industry, academic society and regulatory body in the research on aging management

    International Nuclear Information System (INIS)

    Ishigaki, Hiroki; Osaki, Toru; Kanno, Masanori; Miyano, Hiroshi

    2010-01-01

    Many activities for the coordinated research on aging management are reviewed, and examples of fruitful results are introduced according to the technical strategy map. Industry-Academia-Government exchanging system of the information each other on aging management was established for autonomy, diversity, collaboration. To clarify the concept of the role of industry, government and academia to address aging management without duplication algorithm is for the overall coordination of industrial and academic information and response issues, technological strategy map for aging management formulated. (author)

  3. Waste management in space: a NASA symposium. Special issue

    Science.gov (United States)

    Wydeven, T. (Principal Investigator)

    1991-01-01

    This special issue contains papers from the NASA Symposium on Waste Processing for Advanced Life Support, which was held at NASA Ames Research Center on September 11-13, 1990. Specialists in waste management from academia, government, and industry convened to exchange ideas and advise NASA in developing effective methods for waste management in a Controlled Ecological Life Support System (CELSS). Innovative and well-established methods were presented to assist in developing and managing wastes in closed systems for future long-duration space missions, especially missions to Mars.

  4. Managing human resources in the nuclear power industry: Lessons learned

    International Nuclear Information System (INIS)

    2003-08-01

    This report is intended for senior and middle level managers in nuclear operating organizations. Its objectives are to facilitate the recognition of priority issues with respect to managing human resources, and to provide pragmatic ideas regarding improvements. The human resource issues addressed in this report, if not managed effectively, can result in significant performance problems at nuclear power plants. About 10 years ago the IAEA initiated an effort to identify such management issues and to find effective practices to deal with them. This information was provided in IAEA Technical Reports Series No. 369, Management for Excellence in Nuclear Power Plant Performance - A Manual (1994). This report builds upon the information in the subject manual. In the past 10 years there have been significant changes in the nuclear power industry resulting primarily from more competitive energy markets and privatization of nuclear power plant operating organizations. In general, the industry has responded positively to these changes, as indicated by IAEA/WANO performance indicators that show both improved operational and safety performance. This report provides examples of approaches to managing human resources that have been effective in responding to these changes. This report was produced through a series of meetings, where meeting participants were asked to share information regarding effective practices in their organizations with respect to managing human resources. The information provided through these meetings was supplemented with good practices in this area identified through IAEA Operational Safety Review Teams (OSARTs) conducted during the past 10 years

  5. Barriers analysis for green supply chain management implementation in Indian industries using analytic hierarchy process

    DEFF Research Database (Denmark)

    Govindan, Kannan; Kaliyan, Mathiyazhagan; Kannan, Devika

    2014-01-01

    to the implementation of a green supply chain management (Green SCM) based on procurement effectiveness. A total of 47 barriers were identified, both through detailed literature and discussion with industrial experts and through a questionnaire-based survey from various industrial sectors. Essential barriers......Manufacturing industries started adopting the green concept in their supply chain management recently to focus on environmental issues. But, industries still struggle to identify barriers hindering green supply chain management implementation. This work focuses on identifying barriers...

  6. Water pollution: its management and control in the South African gold mining industry

    International Nuclear Information System (INIS)

    Pulles, W.

    1992-01-01

    The South African mining industry is subjected to pressure from the authorities, the media and the public regarding the impact of mining operations on the water environment. In order to respond to these developments the mining industry needs to have a good understanding of water quality management issues which apply to its operations. Important issues in this regard are discussed. 40 refs., 10 tabs., 2 figs

  7. Sustainable Industrialization in the Building Industry: On the Road to Energy Efficient Construction Management

    DEFF Research Database (Denmark)

    Wandahl, Søren; Ussing, Lene Faber

    2013-01-01

    Since the Brundtland report in 1987, sustainability has been an issue in all parts of the world, and the focus is increasing in these years. In the same period, the building industry has in the same period also been under heavy pressure to increase productivity in the same pace as other manufactu......Since the Brundtland report in 1987, sustainability has been an issue in all parts of the world, and the focus is increasing in these years. In the same period, the building industry has in the same period also been under heavy pressure to increase productivity in the same pace as other...... manufacturing industries. An important question, then, is how well these two highly relevant areas can go hand in hand. By means of comparing the main ideas and drivers behind sustainability and industrialization, respectively, common threads, possible synergies and evident barriers are put forward...... in this discussion paper. The main method is a review to track past merits in the two domains and to detect knowledge gaps that have research potential. A strategic research agenda focusing on energy-efficient construction management is outlined showing the need for future focus on combining industrialization...

  8. Industrial implementation issues of Total Site Heat Integration

    International Nuclear Information System (INIS)

    Chew, Kew Hong; Klemeš, Jiří Jaromír; Wan Alwi, Sharifah Rafidah; Abdul Manan, Zainuddin

    2013-01-01

    Heat Integration has been a well-established energy conservation strategy in the industry. Total Site Heat Integration (TSHI) has received growing interest since its inception in the 90s. The methodology has been used with certain simplifications to solve TSHI problems. This paper investigates the main issues that can influence the practical implementation of TSHI in the industry. The main aim is to provide an assessment and possible guidance for future development and extension of the TSHI methodology from the industrial perspective. Several key issues have been identified as being of vital importance for the industries: design, operation, reliability/availability/maintenance, regulatory/policy and economics. Design issues to consider include plant layout, pressure drop, etc. For operation, issues such as startup and shutdown need to be considered. Reliability, availability and maintenance (RAM) are important as they directly affect the production. Relevant government policy and incentives are also important when considering the options for TSHI. Finally, a TSHI system needs to be economically viable. This paper highlights the key issues to be considered for a successful implementation of TSHI. The impacts of these issues on TS integration are summarised in a matrix, which forms a basis for an improved and closer-to-real-life implementation of the TSHI methodology. Highlights: ► Current TSHI methodology has been used for solving models with certain simplifications. ► Several issues that can influence practical implementation of TSHI are identified. ► Impacts of these issues on safety, environment and economics are evaluated. ► The findings form a basis for an improved and practical implementation of TSHI

  9. The 19th KAIF/KNS annual conference growth of nuclear industry and its current issues

    International Nuclear Information System (INIS)

    Juhn, Poong Eil

    2004-01-01

    After the president Eisenhower's 'Atoms for Peace' speech at the UN general Conference in December 1953, nuclear industry for peaceful uses of nuclear energy has been developed steadily worldwide through international co-operation and collaboration during last half a century. However, from late 1980s, in particular, after Chernobyl nuclear accident in 1986 and growing public opposition on nuclear waste management and disposal, the growth of nuclear power plants worldwide, except some Asian countries, has been slowed down. Nuclear power currently supplies about 16 % of the world's electricity. In the next 50 years, it is expected that the world energy demand will increase about two times comparing current level while electricity demand will be tripled. Therefore, the nuclear industry should be expanded significantly in the next 50 years to meet the role for 'Prosperity beyond Peace'. The main issues for nuclear industry to take this important role are to increase in economics of nuclear power, and to resolve nuclear waste management and disposal. Some of these issues have been resolved mainly through international co-operation. For example, there are significant efforts to improve economics of nuclear power. This paper reviews worldwide efforts to resolve these issues and mentions what are the remaining ones

  10. International trade and waste and fuel management issue, 2009

    Energy Technology Data Exchange (ETDEWEB)

    Agnihotri, Newal (ed.)

    2009-01-15

    The focus of the January-February issue is on international trade and waste and fuel managment. Major articles/reports in this issue include: Innovative financing and workforce planning, by Donna Jacobs, Entergy Nuclear; Nuclear power - a long-term need, by John C. Devine, Gerald Goldsmith and Michael DeLallo, WorleyParsons; Importance of loan guarantee program, by Donald Hintz; EPC contracts for new plants, by Dave Barry, Shaw Power Group; GNEP and fuel recycling, by Alan Hanson, AREVA NC Inc.; Safe and reliable reactor, by Kiyoshi Yamauchi, Mitsubishi Heavy Industries, Ltd.; Safe, small and simple reactors, by Yoshi Sakashita, Toshiba Corporation; Nuclear power in Thailand, by Tatchai Sumitra, Thailand Institute of Nuclear Technology; and, Nuclear power in Vietnam, by Tran Huu Phat, Vietnam Atomic Energy Commission. The Industry Innovation article this issue is Rectifying axial-offset-anomaly problems, by Don Adams, Tennessee Valley Authority. The Plant Profile article is Star of Stars Excellence, by Tyler Lamberts, Entergy Nuclear Operations, Inc.

  11. It Security Issues Within the Video Game Industry

    OpenAIRE

    STEPHEN MOHR; SYED (SHAWON) RAHMAN,

    2011-01-01

    IT security issues are an important aspect for each and every organization within the video game industry. Within the video game industry alone, you might not normally think of security risks being an issue. But as we can and have seen in recent news, no company is immune to security risks no matter how big or how small. While each of these organizations will never be exactly the same as the next, there are common security issues that can and do affect each and every video game company. In or...

  12. International trade and waste and fuel managment issue, 2007

    Energy Technology Data Exchange (ETDEWEB)

    Agnihotri, Newal (ed.)

    2007-01-15

    The focus of the January-February issue is on international trade and waste and fuel managment. Major articles/reports in this issue include: New plants with high safety and availability, by Bill Poirier, Westinghouse Electric Company; Increased reliability and competitiveness, by Russell E. Stachowski, GE Energy, Nuclear; Fuel for long-term supply of nuclear power, by Kumiaki Moriya, Hitachi, Ltd., Japan; Super high burnup fuel, By Noboru Itagaki and Tamotsu Murata, Nuclear Fuel Industries LTD., Japan; Zero fuel failures by 2010, by Tom Patten, AREVA NP Inc.; Decommissioning opportunities in the UK, by David Brown and William Thorn, US Department of Commerce; Industry's three challenges, by Dale E. Klein, US Nuclear Regulatory Commission; and, A step ahead of the current ABWR's, compiled by Claire Zurek, GE Energy.

  13. Industrial pollutions is an environmental issue of Karachi urban area

    International Nuclear Information System (INIS)

    Jokhio, M.H.; Abro, M.I.; Essani, A.

    2005-01-01

    The Industrial pollution is one of the serious Environmental issues of the Karachi urban area, categorized as air pollution and water pollution. The localization more the 6000 industries in Karachi urban area at four different sites of Sindh industrial trading estate, Landhi industrial trading estate, Korangi industrial area west Warf industrials, Port Qasim industrial. Area and Hub industrial are near Karachi city. The major iron and steel industries includes Pakistan steel mills and its allied industries at Bin Qasim more than 100 re-rolling industries are located at site area. Karachi ship yard engineering works, Peoples steel Mill, automobile industries and various manufacturing industries which requires metal and its alloy in manufacturing of product mostly located at Bin Qasim, Korangi, and Shershah site areas. None of the industrial sector contain the waster treatment or recycling plant. The ill planted growth of Karachi and its industries caused the environmental degradation of the city and its coastal areas complete with massive mangrove destruction, air water, fishing, and agriculture possessing a potential threat to the lives of more than 10 million citizens. The environmental issues of the metal related industries include the scrap, waste and pollution. Scrapes am waste of the metal industries can be reused in other manufacturing of engineering materials or recycled to produce the new material. However the pollution is the one of the major environmental issue related with the metal industries which need the considerable research and development work in order to over come the serve environmental issues of the urban areas. This article reviews and identifies the level of industrial pollution emphasized on metal related industries of the Karachi urban areas. (author)

  14. Waste management practices in Ontario`s workplaces: An emerging industrial ecology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    Describes a study commissioned to evaluate employee attitudes and behaviours with respect to participation in workplace initiatives in waste diversion/reduction, to examine management initiatives related to waste diversion and reduction/recycling/reuse, and to report on Ontario Ministry of Environment & Energy activities related to industrial, commercial, and institutional (ICI) waste diversion activities. Linkages between management and employees, management and government, and ICI activities and government were also studied. The study methodology included a literature review, a series of interviews with key stakeholders, industry associations, and waste management companies, and a series of 12 case studies spanning major industrial sectors in Ontario. Issues addressed in the study include the factors that trigger waste diversion activities by ICI establishments, barriers to the initiation of waste diversion practices, and the social aspects of waste reduction/recycling/reuse practices.

  15. Managing environmental issues at large-scale industrial estates: Problems and initiatives in central and eastern Europe and the former Soviet Union

    International Nuclear Information System (INIS)

    Coyle, R.

    1996-01-01

    A great many large-scale industrial sites are undergoing major transformation and restructuring in central and eastern Europe and the former Soviet Union. The EBRD's portfolio of investment projects increasingly includes such sites, presenting the Bank with environmental challenges related to their size, complexity and history. Both technological improvements and changes in management structure are needed in order to address environmental, and health and safety, issues. The EBRD requires ''environmental due diligence'' on all of its projects under preparation. Requirements vary, depending on the nature of each project. (author)

  16. Organization and management activities in the nuclear power industry

    International Nuclear Information System (INIS)

    Evans, R.C.; Whitesel, R.N.

    1994-01-01

    The purpose of organization and management development activities in the commercial nuclear power industry is to foster high levels of power plant performance and safety through improved human performance. The NRC has been working to develop assessment tools to assay the effects of organizational factors on plant safety. The utility industry has been working on initiatives targeting individual accountability, the improvement of plant performance and the elimination of the items identified through the NRC assessment process. Organization and management activities do not focus on industry organizational charts, but on the personnel processes and dimensions (factors) that affect safety and economic performance. As individual terms these activities are often combined and referred to as organizational factors. As an area of study, organizational factors has become more prominent as the industry emphasis has switched in recent years from hardware issues related to safety and economics, to personnel-related issues. Beyond the obvious safety objectives affected by improved human performance, plant performance improvements, in areas such as capacity factors, can be achieved through improved human performance. For example, it is estimated that as many as half of the unplanned reactor scrams are caused by personnel errors. The integrated effect of these scram-initiating errors is conservatively estimated to be 100 lost capacity days per year. The financial impact of these events is estimated to be $100M per year

  17. Project management in building industry management

    Directory of Open Access Journals (Sweden)

    Martin Nový

    2012-01-01

    Full Text Available The article deals with contents of the project management on general level first. It mentions the most widespread project management standards, which have historically developed in global scale, their parts and objectives. Further, it describes position of the building industry in national economy, its specific features distinguishing it from the other industrial production, contents of the building industry management and project management of structures. The importance of the role of project manager is documented by characteristics of construction projects, their course, contents of sub-phases, and individual types of managing activities. Attention is devoted to project planning – determination of realization costs, necessary resources, sequence and time course of individual works. The most frequently used graphic methods of schedule presentation – Gantt chart, network chart and frequency bar chart are applied on examples of constructions. These charts can be focused in time sequence on individual types of resources – workforce, finance, materials, energies, and machinery. In conclusion, necessity to manage the project management procedures is emphasized as a part of skills of a construction engineer in the role of preparation manager or construction project realization manager.

  18. Supply chain management in industrial production. A retrospective view

    OpenAIRE

    Stocchetti, Andrea; Scattola, Elena

    2011-01-01

    The article presents a retrospective review on key-issues about how the management discipline evolved up to the current view about supply-chain management (SCM) in industrial production. Specifically, the article resumes: a) the reasons that led to the transition from the traditional procurement policies to the SCM approach, b) the variables involved in the process of defining SCM relations and c) the key managerial principles underlying SCM policies and strategies. In the manufacturing in...

  19. Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

    Directory of Open Access Journals (Sweden)

    Larissa A. R. U. Freitas

    2017-07-01

    Full Text Available The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ecology contributions to waste management in industrial construction. The waste management strategies adopted in two industrial construction projects in Brazil are analyzed. The main waste streams generated are identified, recycling and landfilling diversion rates are presented and waste recovery through Industrial Symbiosis is discussed. A SWOT analysis was carried out. Results demonstrate that 9% of the waste produced in one of the projects was recovered through Industrial Symbiosis, while in the other project, waste recovery through Industrial Symbiosis achieved the rate of 30%. These data reveal Industrial Symbiosis’ potential to reduce landfilling of industrial construction wastes, contributing to waste recovery in construction. In addition, results show that industrial construction projects can benefit from the following synergies common in Industrial Ecology place-based approaches: centralized waste management service, shared waste management infrastructure and administrative simplification.

  20. Practicing industrial safety - issues involved

    International Nuclear Information System (INIS)

    Gunasekaran, P.

    2016-01-01

    Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

  1. Management issues for high performance storage systems

    Energy Technology Data Exchange (ETDEWEB)

    Louis, S. [Lawrence Livermore National Lab., CA (United States); Burris, R. [Oak Ridge National Lab., TN (United States)

    1995-03-01

    Managing distributed high-performance storage systems is complex and, although sharing common ground with traditional network and systems management, presents unique storage-related issues. Integration technologies and frameworks exist to help manage distributed network and system environments. Industry-driven consortia provide open forums where vendors and users cooperate to leverage solutions. But these new approaches to open management fall short addressing the needs of scalable, distributed storage. We discuss the motivation and requirements for storage system management (SSM) capabilities and describe how SSM manages distributed servers and storage resource objects in the High Performance Storage System (HPSS), a new storage facility for data-intensive applications and large-scale computing. Modem storage systems, such as HPSS, require many SSM capabilities, including server and resource configuration control, performance monitoring, quality of service, flexible policies, file migration, file repacking, accounting, and quotas. We present results of initial HPSS SSM development including design decisions and implementation trade-offs. We conclude with plans for follow-on work and provide storage-related recommendations for vendors and standards groups seeking enterprise-wide management solutions.

  2. Effective energy management system using ISO 9000/14000 concept industries

    International Nuclear Information System (INIS)

    Asfaazam Kasbani; Kamaruzzaman Sopian

    2006-01-01

    Energy management is a system of managing energy utilization wisely and it includes issues such as energy efficiency (conservation), use of renewable energy, use of technology and development of energy policy. Its benefits has been well known for cost reduction and increase competitiveness and also other indirect impact such as preserving the natural resources and reduction of green-house gases. Although various strategies have been formulated by the government for the industries to adopt energy management, the result seems to be minimal and stagnant in some ways due to the various barriers which exists. Industries on the other hand, have successfully welcomed two famous management system namely the Environmental Management System ISO 14000 and the Quality Management System ISO 9000 to be implemented at their premises. This paper shows how energy management system can be effectively implemented by comparing similar generic management elements of energy management to ISO 9000/14000 standards. The seven (7) elements of energy management system discussed are top management commitment, policy establishment, energy management team, energy audit, energy efficiency projects, monitoring and training

  3. 7 CFR 1980.488 - Guaranteed industrial development bond issues.

    Science.gov (United States)

    2010-01-01

    ... industrial plants for lease to private businesses engaged in industrial manufacturing and does not provide... 7 Agriculture 14 2010-01-01 2009-01-01 true Guaranteed industrial development bond issues. 1980..., DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL Business and Industrial Loan...

  4. Empirical Investigation of Industrial Management

    Directory of Open Access Journals (Sweden)

    Elenko Zahariev

    2014-07-01

    Full Text Available The paper is devoted to an aspect in the sphere of management – business priorities of industrial management in XXI century. In modern times the actuality of treated problems is mainly laid into the necessities of the real management practice in industrial organizations and the need theoretical and applied knowledge to be offered to that practice which would allow it methodologically right and methodically correct to implement the corresponding changes in management of a concrete organization. Objects of analyses and evaluations are some fragmented approbations of theses using the corresponding instruments. The characteristic features of the organizations’ profiles and the persons interviewed participated in the investigation are summarized. The determining approaches for Bulgarian organizations are considered too. On the basis of the critical analyses the fundamental tasks are drawn which are inherent to contemporary industrial managers. Attention is paid to key management functions for an effective managerial process. An analysis of managers reaching the best results in industrial management is presented as well as when they are reached. Outlined are also specific peculiarities of industrial management in theRepublicofBulgariaand parameters of the level of productiveness in conditions of business globalization and priority forms in marketing of the ready product / service in XXI century. The results of the launched idea for the necessity to create a new International management architecture (NIMA are determined – structure and structure defining parameters. The results of the investigation of main business priorities in industrial management are commented as well as expected problems in the process of functioning of industrial organizations in XXI century. At the end the corresponding conclusions are made in respect to the techniques used in determining effectiveness of industrial management in Bulgarian organizations.

  5. LEARNING MANAGEMENT SYSTEMS: ENGINEERING THE EDUCATION INDUSTRY TO EDUCATE THE INDUSTRIAL ENGINEER

    Directory of Open Access Journals (Sweden)

    L. Van Dyk

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: A learning management system (LMS is any infrastructure on which e-learning can be built and delivered. In this article two sides of the LMS coin are investigated: On the one side, it is argued that industrial and systems engineering skills are equally relevant for learning systems as for as for any other system. To support this argument, an analogy is drawn between the management of learning systems and the management of manufacturing systems. On the other side of the coin, the educational issues and concerns related to implementing an LMS at the University of Pretoria are investigated by means of a case study in the Industrial Engineering department. It is concluded that the industrial engineering educator is in the unique position of understanding and contributing towards the engineering of the education industry whilst educating the industrial engineer.

    AFRIKAANSE OPSOMMING: ‘n Leerbestuurstelsel (LMS is enige infrastruktuur waarop e-leer gebou en afgelewer kan word. In hierdie artikel word beide kante van die LMS muntstuk ondersoek: Aan die een kant word getoon dat bedryfsingenieursvaardighede en -beginsels ewe toepaslik is op leerstelsels as op vervaardigingstelsels. Om hierdie argument te steun word 'n analogie getrek tussen the bestuur van leerstelsels en die bestuur van vervaardigingstelsels. Aan die ander kant van die muntstuk word die opvoedkundige aspekte verbonde aan die implementering van ‘n leerbestuurstelsel (LMS aan die Universiteit van Pretoria ondersoek aan die hand van ‘n gevallestudie in die Bedryfsingenieursdepartment. Die gevolgtrekking word gemaak dat die bedryfsingenieurs-opleier in 'n unieke posisie is om die opleidingsindustrie te begryp en by dra tot the ontwikkeling daarvan terwyl die bedryfsingenieur opgelei word.

  6. Clothing industry: development problems, regional dislocation and modern management technologies for small enterprises

    Directory of Open Access Journals (Sweden)

    I. Hristoforova

    2015-01-01

    Full Text Available This article discusses issues related to the problems of development of light industry in the territory of the former Soviet Union, systematize industry regions and analyzes modern management technologies used by small businesses garment industry. The aim of the article is the analysis of the organizational and economic aspects of light industry on the example of clothing companies. The objectives of the article: to sistematize the major regions of the dislocation of light industry: textile, footwear, clothing; to characterize the current state of the apparel industry enterprises; to show the value of small clothing companies; to study the need for the introduction of flexible manufacturing systems (FMS on small sewing factories; to analyze the range of the scientific development of national universities in the study of flexible manufacturing systems and give them a brief description.Methodology. The methodological basis of the paper is the following scientific methods: deduction, comparative and group analysis, desk research. The Results. The result of the study is to identify the main issues and trends in the development of light industry, ordering the placement of the industry in the territory of the former Soviet Union, the definition of the most popular management techniques used in small businesses garment industry.Conclusions / significance. The above article analyzes the development of light industry has allowed to identify the main trends and formulate problems for the enterprises. New conditions require the development of small enterprises and the introduction of modern technologies in production processes and management.

  7. Empirical Analysis of Green Supply Chain Management Practices in Indian Automobile Industry

    Science.gov (United States)

    Luthra, S.; Garg, D.; Haleem, A.

    2014-04-01

    Environmental sustainability and green environmental issues have an increasing popularity among researchers and supply chain practitioners. An attempt has been made to identify and empirically analyze green supply chain management (GSCM) practices in Indian automobile industry. Six main GSCM practices (having 37 sub practices) and four expected performance outcomes (having 16 performances) have been identified by implementing GSCM practices from literature review. Questionnaire based survey has been made to validate these practices and performance outcomes. 123 complete questionnaires were collected from Indian automobile organizations and used for empirical analysis of GSCM practices in Indian automobile industry. Descriptive statistics have been used to know current implementation status of GSCM practices in Indian automobile industry and multiple regression analysis has been carried out to know the impact on expected organizational performance outcomes by current GSCM practices adopted by Indian automobile industry. The results of study suggested that environmental, economic, social and operational performances improve with the implementation of GSCM practices. This paper may play an important role to understand various GSCM implementation issues and help practicing managers to improve their performances in the supply chain.

  8. Theoretical and Methodological issues concerning managers' mental models of competitive industry structures

    OpenAIRE

    Daniels, Kevin; Johnson, Gerry; De Chernatony, Leslie

    1992-01-01

    To be presented at the British Academy of Management Conference, Bradford, September 1992. The methodology traditionally employed by strategic groups theorists categorizes companies on the basis of objective economic variables such as industry supply characteristics. Other lines of research have suggested that this economic approach is limited, and that a more cognitive approach is needed. Strategic groups theory proposes one way in which companies may be categorized, but it is not clea...

  9. Analysis of Information Sharing Mechanism in the Food Industry Green Supply Chain Management and Operation Process

    OpenAIRE

    Liu, Ye-ming; Yin, Fang-fang; Fu, Xian-zhi

    2011-01-01

    In order to effectively address the issues of environmental pollution and food safety in food industry, the green supply chain management should be used in the food industry. However, information sharing is the basis of supply chain management. For this purpose, on the basis of describing the connotation of food industry green supply chain management, the paper introduces the contents and the effects of information sharing mode in detail. It focuses on the barriers of the implementation of in...

  10. Development of a master plan for industrial solid waste management

    International Nuclear Information System (INIS)

    Karamouz, M.; Zahraie, B.; Kerachian, R.; Mahjouri, N.; Moridi, A.

    2006-01-01

    Rapid industrial growth in the province of Khuzestan in the south west of Iran has resulted in disposal of about 1750 tons of solid waste per day. Most of these industrial solid wastes including hazardous wastes are disposed without considering environmental issues. This has contributed considerably to the pollution of the environment. This paper introduces a framework in which to develop a master plan for industrial solid waste management. There are usually different criteria for evaluating the existing solid waste pollution loads and how effective the management schemes are. A multiple criteria decision making technique, namely Analytical Hierarchy Process, is used for ranking the industrial units based on their share in solid waste related environmental pollution and determining the share of each unit in total solid waste pollution load. In this framework, a comprehensive set of direct, indirect, and supporting projects are proposed for solid waste pollution control. The proposed framework is applied for industrial solid waste management in the province of Khuzestan in Iran and a databank including GIS based maps of the study area is also developed. The results have shown that the industries located near the capital city of the province, Ahwaz, produce more than 32 percent of the total solid waste pollution load of the province. Application of the methodology also has shown that it can be effectively used for development of the master plan and management of industrial solid wastes

  11. Special issue: the nuclear industry in Europe

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    This special issue contains papers on the following topics: French nuclear policy; nuclear energy development in Europe; nuclear diversification; Alsthom-Atlantique in the nuclear field; 1981 nuclear electricity generation; EDF siting policy; the N4 model of the 1300 MW series; Creys-Malville; the nuclear industry in Europe; pumps in the nuclear industry [fr

  12. Corrosion issues in nuclear industry today

    International Nuclear Information System (INIS)

    Cattant, F.; Crusset, D.; Feron, D.

    2008-01-01

    In the context of global warming, nuclear energy is a carbon-free source of power and so is a meaningful option for energy production without CO 2 emissions. Currently, there are more than 440 commercial nuclear reactors, accounting for about 15% of electric power generation in the world, and there has not been a major accident in over 20 years. The world's fleet of nuclear power plants is, on average, more than 20 years old. Even though the design life of a nuclear power plant is typically 30 or 40 years, it is quite feasible that many nuclear power plants will be able to operate for longer than this. The re-emergence of nuclear power today is founded on the present generation of nuclear reactors meeting the demands of extended service life, ensuring the cost competitiveness of nuclear power and matching enhanced safety requirements. Nuclear power plant engineers should be able to demonstrate such integrity and reliability of their system materials and components as to enable nuclear power plants to operate beyond their initial design life. Effective waste management is another challenge for sustainable nuclear energy today; more precisely, a solution is needed for the management of high-level and long-lived intermediate-level radioactive waste over the very long term. Most nuclear countries are currently gathering the data needed to assess the feasibility of a deep geological waste repository, including the prediction of the behaviour of materials over several thousands of years. The extended service life of nuclear power plants and the need for permanent disposal for nuclear waste are today's key issues in the nuclear industry. We focus here on the major role that corrosion plays in these two factors, and on the French approaches to these two issues. (authors)

  13. Long-term issues associated with spent nuclear power fuel management options

    International Nuclear Information System (INIS)

    Jae-Sol, Lee; Kosaku, Fukuda; Burcl, R.; Bell, M.

    2003-01-01

    Spent fuel management is perceived as one of the crucial issues to be resolved for sustainable utilisation of nuclear power. In the last decades, spent fuel management policies have shown diverging tendencies among the nuclear power production countries - a group has adhered to reprocessing- recycle and another has turned to direct disposal, while the rest of the countries have not taken decision yet, often with ''wait and see'' position. Both the closed and open fuel cycle options for spent fuel management have been subject to a number of debates with pros and cons on various issues such as proliferation risk, environmental impact, etc. The anticipation for better technical solutions that would mitigate those issues has given rise to the renewal of interest in partitioning and transmutation of harmful nuclides to be disposed of, and in a broader context, the recent initiatives for development of innovative nuclear systems. The current trend toward globalization of market economy, which has already brought important impacts on nuclear industry, might have a stimulating effect on regional-international co-operations for cost-effective efforts to mitigate some of those long-term issues associated with spent fuel management. (author)

  14. Analysis of Information Sharing Mechanism in the Food Industry Green Supply Chain Management and Operation Process

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    In order to effectively address the issues of environmental pollution and food safety in food industry,the green supply chain management should be used in the food industry.However,information sharing is the basis of supply chain management.For this purpose,on the basis of describing the connotation of food industry green supply chain management,the paper introduces the contents and the effects of information sharing mode in detail.It focuses on the barriers of the implementation of information-sharing mechanisms in the food industry green supply chain management and operation process and analyzes the necessity of using information sharing mechanism among the members of the food industry green supply chain management mode by game theory,so as to strengthen the competitiveness of enterprises through supply chain management.

  15. Big Data in the Industry - Overview of Selected Issues

    Science.gov (United States)

    Gierej, Sylwia

    2017-12-01

    This article reviews selected issues related to the use of Big Data in the industry. The aim is to define the potential scope and forms of using large data sets in manufacturing companies. By systematically reviewing scientific and professional literature, selected issues related to the use of mass data analytics in production were analyzed. A definition of Big Data was presented, detailing its main attributes. The importance of mass data processing technology in the development of Industry 4.0 concept has been highlighted. Subsequently, attention was paid to issues such as production process optimization, decision making and mass production individualisation, and indicated the potential for large volumes of data. As a result, conclusions were drawn regarding the potential of using Big Data in the industry.

  16. Implementing of a system of industrial regulatory management in the Almaraz and Trillo

    International Nuclear Information System (INIS)

    Yague, F.

    2011-01-01

    Nuclear Power Plants are complex facilities, which in addition to nuclear safety standards, apply a large number of general industrial regulations. they refer to issues such as design, construction, in-service inspection and decommissioning in various technical areas, affecting numerous equipment. Almaraz-Trillo NPP, has decided to address systematically the fulfilment of such regulations, by implementing a Management System of Industrial Regulation, aimed at continuous improvement and integrated in the organization ser of management mechanisms. (Author)

  17. Confined Site Construction: A qualitative investigation of critical issues affecting management of Health and Safety

    OpenAIRE

    Spillane, John P.; Oyedele, Lukumon O.; Von Meding, Jason; Konanahalli, Ashwini; Jaiyeoba, Babatunde E.; Tijani, Iyabo K.

    2011-01-01

    The construction industry is inherently risky, with a significant number of accidents and disasters occurring, particularly on confined construction sites. This research investigates and identifies the various issues affecting successful management of health and safety in confined construction sites. The rationale is that identifying the issues would assist the management of health and safety particularly in inner city centres which are mostly confined sites. Using empiricism epistemology, th...

  18. Eco-industrial initiatives in Asia : issues and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Chiu, A.S.F. [Industrial Ecology Asia Network, (China)

    2002-07-01

    This Power Point presentation discusses the impact of industry urban-suburban relocation. This relocation to industrial zones is on the rise in Asia, where there are now approximately 4,000 industrial estates, resulting from export-oriented businesses, cluster-based activities and collective management systems. Eco-industrial parks are zones that promote sustainable development through the combined benefits of environmental, social and economic initiatives. Eco-industrial parks enact environmental management laws and initiate eco-industrial development projects. Asia is diverse in access to natural resources, economics, politics, and level of development and access to natural resources. The paper describes how eco-business and a recycling-oriented economic society is being adopted in countries in Asia including China, Japan, Thailand, Philippines, Indonesia, Malaysia, Vietnam and India. tabs., figs.

  19. International trade and waste and fuel managment issue, 2008

    Energy Technology Data Exchange (ETDEWEB)

    Agnihotri, Newal (ed.)

    2008-01-15

    The focus of the January-February issue is on international trade and waste and fuel managment. Major articles/reports in this issue include: A global solution for clients, by Yves Linz, AREVA NP; A safer, secure and economical plant, by Andy White, GE Hitachi Nuclear; Robust global prospects, by Ken Petrunik, Atomic Energy of Canada Limited; Development of NPPs in China, by Chen Changbing and Li Huiqiang, Huazhong University of Science and Technology; Yucca Mountain update; and, A class of its own, by Tyler Lamberts, Entergy Nuclear. The Industry Innovation articles in this issue are: Fuel assembly inspection program, by Jim Lemons, Tennessee Valley Authority; and, Improved in-core fuel shuffle for reduced refueling duration, by James Tusar, Exelon Nuclear.

  20. Knowledge management for nuclear industry operating organizations

    International Nuclear Information System (INIS)

    2006-10-01

    research facilities to reduce operating costs and a decline in support to the universities to reduce overheads. The above factors have led to a reduction in technical innovation and a potential loss of technical competences that have drawn the attention of many concerned parties to the need for effective strategies and policies for nuclear knowledge management. The Director General of the IAEA, Mohamed ElBaradei, in his statement to the forty-seventh regular session of the IAEA General Conference 2003, said: 'Whether or not nuclear power witnesses an expansion in the coming decades, it is essential that we preserve nuclear scientific and technical competence for the safe operation of existing facilities and applications. Effective management of nuclear knowledge should include succession planning for the nuclear work force, the maintenance of the 'nuclear safety case' for operational reactors, and retention of the nuclear knowledge accumulated over the past six decades'. This report is intended for senior and middle level managers of nuclear industry operating organizations and provides practical information that can be used to improve knowledge management (KM) in such organizations. The information provided in this report is based upon actual experiences of Member State operating organizations as well as other related industries. The Nuclear Power Industry's Ageing Workforce: Transfer of Knowledge to the Next Generation, IAEA-TECDOC-1399, highlighted some of the knowledge management issues in Member States resulting from the large number of retiring NPP personnel who had been involved with the commissioning and initial operation of NPPs. This report complements that publication by broadening the scope of KM strategic issues, methods and techniques for nuclear industry operating organizations

  1. Energy Management Programmes for Industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-05

    The IEA Policy Pathway publications provide details on how to implement specific recommendations drawn from the IEA 25 Energy Efficiency Policy Recommendations. This Policy Pathway, jointly produced by the International Energy Agency and the Institute for Industrial Productivity, develops the critical steps for policy makers implementing energy management programmes for industry. Optimising energy use in industry is essential to improve industrial competitiveness and achieve wider societal goals such as energy security, economic recovery and development, climate change mitigation and environmental protection. While there is significant potential to decrease energy consumption in this sector, opportunities to improve energy efficiency are still under-exploited. Energy management programmes have shown to be instrumental in addressing many of the barriers that inhibit wide-scale uptake of energy management in industry. The Policy Pathway builds on lessons learned from country experiences and provides actionable guidance on how to plan and design, implement, evaluate and monitor energy management programmes for industry.

  2. Manufacturing strategy issues in selected Indian manufacturing industry

    Directory of Open Access Journals (Sweden)

    Mahender Singh

    2013-03-01

    Full Text Available This paper presents some findings of Indian manufacturing sectors viz. automobile (especially two-wheeler, tractor and general manufacturing industry. Various manufacturing strategy issues such as competitive priorities, improvement activities, and performance measures, have been identified and assessed in Indian context. Sector wise comparison of competitive priorities, improvement activities i.e. advanced manufacturing technology (AMT, integrated information systems (IIS, and advanced management systems (AMS, and performance measure, is provided. Our results showed that most of the Indian companies are still emphasizing on quality. However, automobile sector has set to compete globally with high innovation rate, faster new product development, and continuous improvement. It is also observed that Indian companies are investing more in AMS as compared to IIS and AMT. Manufacturing competence index is also computed for each sector.

  3. Halal Supply Chain Management Streamlined Practices: Issues and Challenges

    Science.gov (United States)

    Hijrah Abd Kadir, Muhammad; Zuraidah Raja Mohd Rasi, Raja; Omar, Siti Sarah; Manap, Zariq Imran Abdul

    2016-11-01

    The quickly developing worldwide halal in business sector has given a remarkable window of chance, which empowers Malaysia to the renowned halal centre in worldwide (known as Halal-hubs). Malaysia also has proactively taken a lead in halal activities, which is presently considered as the benchmark for a halal framework worldwide. Malaysia also set up the Halal Industry Development Corporation (HDC) which driving a wide range of halal activities since the demand of halal food has increased significantly which is very crucial for a Muslim in ensuring its authenticity and integrity. Even in parallel to this developments, many studies has been conducted because there are many issues still occurs in the food industry. The issue of consumer awareness and understanding the halal principles, mixing of halal and non- halal products, halal certification and logo compliance with Shariah law and lack of regulation and enforcement need the serious attention by all parties along the supply chain. The challenges occur mainly in the halal food segregation and halal traceability of the products. The unit of analysis in this study different halal stakeholders group which are JAKIM, Halal Development Centre (HDC), Raw Material Manufacturers, Retailers and Government Agencies. This paper attempt discusses the issues and challenges occurs in the halal supply chain and faced by the practitioners as well as the relevant parties involved in the industry especially for food products manufacturers. The study would like to give a basic information about the issues and challenges in the contribution of Halal Supply Chain Management (HSCM) as well as for the future studies.

  4. Codes of practice and related issues in biomedical waste management

    Energy Technology Data Exchange (ETDEWEB)

    Moy, D.; Watt, C. [Griffith Univ. (Australia)

    1996-12-31

    This paper outlines the development of a National Code of Practice for biomedical waste management in Australia. The 10 key areas addressed by the code are industry mission statement; uniform terms and definitions; community relations - public perceptions and right to know; generation, source separation, and handling; storage requirements; transportation; treatment and disposal; disposal of solid and liquid residues and air emissions; occupational health and safety; staff awareness and education. A comparison with other industry codes in Australia is made. A list of outstanding issues is also provided; these include the development of standard containers, treatment effectiveness, and reusable sharps containers.

  5. The transportation issue management system: A tool for issue resolution

    International Nuclear Information System (INIS)

    Branch, K.M.; Boryczka, M.K.

    1987-01-01

    During the last decade, issue management programs have been developed and used by a number of large corporations in the United States. These systems have generally been designed to help senior program managers identify issues, develop strategic plans, and resolve issues. These systems involve scanning and abstracting literature to create a database that is then used for 1) issue identification, 2) issue analysis, 3) priority assessment, 4) development of corporate position/strategic options, and 5) action planning and implementation. Most of the existing systems rely on staff to identify trends in the computerized output, analyze the importance of the issue to the company, and assist in developing corporate responses. The Department of Energy has recently developed an issue management system for the Office of Civilian Radioactive Waste Management's (OCRWM) transportation program. This system is designed to help DOE identify institutional issues related to radioactive waste transportation, analyze the issues, and resolve them in a manner that is responsive to interested parties. The system will contain pertinent information from DOE technical reports, other federal documents, correspondence, professional journals, popular literature, newsclips, legislation and testimony. The program is designed around a number of institutional issues including: prenotification, physical protection procedures; highway, rail, and barge routing; inspections and enforcement of shipments; emergency response; liability, cask design and testing; overweight trucks; rail service; modal mix; infrastructure improvements; training standards, and operational procedures

  6. Review of Solid Waste Management Practice, Handling and Planning in the Construction Industry

    Directory of Open Access Journals (Sweden)

    Fiza Mohd Noh

    2017-11-01

    Full Text Available The building and construction industry is a major contributor to the source of national economy. However, inappropriate construction waste management lead to various problems such as illegal dumping along the roadsides, demolition waste and disposal of construction at landfills that Malaysia is facing serious shortage of landfill space and recently the issue has become more serious throughout the country, which these have caused major government sources and environmental issue. Solid waste management is one of the environmental issues which always been a concerned to most governments. In urban areas, 46% of the population in the statistics that shows the world population has reached six billion. In 1997, generation of the municipal solid waste was about 0.49 billion tons around the globe with an estimated annual growth rate of 3.2-4.5% in develop nations and 2-3% in developing countries. The characteristics of solid waste generated were changed due to the rapid urbanization and industrialization.

  7. Social management in traditional, industrial and post-industrial society: the prospects for management systems development

    Directory of Open Access Journals (Sweden)

    V S Mukhametzhanova

    2010-09-01

    Full Text Available The article is devoted to social management development at different stages of society's evolution - traditional, industrial and post-industrial. The historical types of social management are highlighted.

  8. The Implications of Industrial Management for the Administration of Industrial Education Programs

    Science.gov (United States)

    White, Michael R.

    1978-01-01

    The paper discusses the functions and principles of industrial management, compares educational and industrial organization, and notes industrial management techniques applicable to industrial education administration. (MF)

  9. An Empirical Study of Industrial Engineering and Management Curriculum Reform in Fostering Students' Creativity

    Science.gov (United States)

    Chen, Chi-Kuang; Jiang, Bernard C.; Hsu, Kuang-Yiao

    2005-01-01

    The objective of this paper is to examine the effectiveness of a creativity-fostering program in industrial engineering and management (IE&M) curriculum reform. Fostering creativity in students has become a crucial issue in industrial engineering education. In a survey of previous studies, we found few on IE&M curriculum reform. In…

  10. MANAGEMENT SOFT-FACTORS IN INDUSTRIES

    Directory of Open Access Journals (Sweden)

    L. V. Fatkin

    2012-01-01

    Full Text Available No proper attention is given in existing management theories and concepts to systematization and analysis of non-material management factors, so-called «soft-factors». In industries, management soft-factors may be treated in a broader way. An example of a broader treatment of management soft-factors is given for the system of state regulation of foreign trade activities in industries along with specification, determination and rating of organizational and administrative management soft-factors.

  11. Progress of environmental management and risk assessment of industrial chemicals in China

    International Nuclear Information System (INIS)

    Wang Hong; Yan Zhenguang; Li Hong; Yang Niyun; Leung, Kenneth M.Y.; Wang Yizhe; Yu Ruozhen; Zhang Lai; Wang Wanhua; Jiao Congying

    2012-01-01

    With China’s rapid economic growth, chemical-related environmental issues have become increasingly prominent, and the environmental management of chemicals has garnered increased attention from the government. This review focuses on the current situation and the application of risk assessment in China’s environmental management of industrial chemicals. The related challenges and research needs of the country are also discussed. The Chinese government promulgated regulations for the import and export of toxic chemicals in 1994. Regulations for new chemical substances came into force in 2003, and were revised in 2010 based on the concept of risk management. In order to support the implementation of new regulations, Guidance for Risk Assessment of Chemicals is under development in an attempt to provide the concepts and techniques of risk assessment. With increasing concern and financial support from Chinese government, China is embarking on the fast track of research and development in environmental management of industrial chemicals. - This paper reviews the current situation of industrial chemical management in China, and discusses the application of risk assessment and further research needs in this field.

  12. EFFECTIVE CRISIS MANAGEMENT FOR ISLAMIC FINANCIAL INDUSTRY AND THE INSTITUTION OF HISBAH: LESSONS FROM GLOBAL FINANCIAL CRISIS

    OpenAIRE

    Najeeb Zada; Ahcene Lahsasna; Muhammad Yusuf Saleem

    2016-01-01

    The recent financial crisis resulted destructive effects on finance industry. Islamic financial industry (IFI) is still naïve and largely untested in the face of a major financial turmoil. Major issues and uncertainties of the insolvency of IFI include the issue of moral hazard, government bailouts, excessive risk taking and deposit insurance. This paper addresses the issue of crisis management in IFI from the perspective of al-Siyasah al-Shar'iyyah and attempts to derive public policy guidel...

  13. Understanding and managing environmental liability in the Saskatchewan oil and gas industry

    International Nuclear Information System (INIS)

    Andrychuk, L.D.; LeBlanc, L.B.

    1998-01-01

    An overview of Saskatchewan legislative framework regarding the oil and gas industry was presented. In the oil and gas industry, environmental issues are regulated at the provincial level, but the industry must also be aware of federal environmental law when dealing with federal lands, federal financial assistance, interprovincial or international projects or projects which have transboundary environmental effects. In this context, the provisions of the Oil and Gas Conservation Act (OGCA) and the Oil and Gas Conservation Regulations (OGCR), the licensing of oil and gas wells, the acquisition and surrender of surface rights, and the procedures involved in environmental assessment approval were outlined. Emission control, air pollution abatement, the storage and disposal of hazardous materials, environmental issues in property transactions, and corporate environmental management are also subject to regulation under OGCA and OGCR. 42 refs

  14. Cost-based industrial enterprise human capital management

    Directory of Open Access Journals (Sweden)

    Glukhov Sergei

    2017-01-01

    Full Text Available The paper focuses on importance of human capital in development of industrial enterprises, issues of their management and methods of achieving balance between interests of owners and employees. Difference between such concepts as human and labor potential as well as human and working capital is clarified. The special attention is paid to the fact that an effective system of motivation and incentivation of labor is to serve as means of rapprochement of human and labor capital. The authors point out the limited scope of the traditional forms of labor motivation and incentivation mechanisms and highlight the complexity of their encouragement for collective work results. The authors suggest using the cost-based approach to workforce management, which is based on assessment of market and intrinsic value of human capital in view of investment and quality characteristics. The proposed approach is attended by methodological support and operational calculations. The study states that the suggested human capital management model can be introduced into practice, as well as substantiates the necessity for boosting the performance of industrial enterprises and their cost by increasing production, stimulating the staff for selfrealization and self-improvement by bringing the owners’ corporate interests closer to the interests of the employees.

  15. Development and issues of nuclear industry in Taiwan

    International Nuclear Information System (INIS)

    Kuangchi Liu

    1994-01-01

    Industrial and economic developments in Taiwan have achieved a so-called 'miracle' in the last decades. Endeavors by the private enterprise, prudent planning by the government, and the devoted efforts by the diligent and creative labor forces have been credited jointly with the result. To develop a sustainable nuclear industry in support of an efficient and safe power generation and other applications of nuclear energy in Taiwan, continuing efforts from the private industry, government and each individual of the nuclear industry will be required. In this paper, milestones of the past and major issues for future developments will be discussed

  16. Principles and applications of knowledge management in the BC industry (with examples

    Directory of Open Access Journals (Sweden)

    Igor Bizjak

    2006-01-01

    Full Text Available Many definitions define Knowledge Management as capturing, organizing and storing knowledge by different methods from various sources and transforming it into enduring value. The knowledge management is one of the most important principles that companies must explore and use to gain the competitive advantage, even in buildings and construction industry. There are various projects of knowledge management for the BC industry. One such project is e-COGNOS. Its key issues are knowledge management in the construction domain and documents interdependencies and consistency across projects and between enterprises. At the Urban Planning Institute of the Republic of Slovenia we are using very crude methods of knowledge management or we even can not call it a knowledge management. It is more or less information services or document management. With new technologies like Microsoft SharePoint services, we are hoping that we will be able to advance these old methods and use accumulated knowledge in a more sophisticated way.

  17. Nuclear waste management in Canada : critical issues, critical perspectives

    International Nuclear Information System (INIS)

    Durant, D.; Fuji Johnson, G.

    2009-01-01

    As oil reserves decline and the environment takes centre stage in public policy discussions, the merits and dangers of nuclear power and nuclear waste management continue to be debated. Canada is intent on building more reactors to increase energy production without destroying the planet, but it and other nuclear energy-producing countries face not only technical problems but also social and ethical issues. This book provides a critical antidote to the favourable position of government and industry. The contributors build their case by exploring key issues and developments. What do frequently used terms such as safety, risk, and acceptability really mean? How and why did the public consultation process in Canada fail to address ethical and social issues? What is the significance and potential of a public consultation process that involves diverse interests, epistemologies, and actors, including Aboriginal peoples? And how do we ensure that our frameworks for discussion are inclusive and ethical? This timely collection defuses the uncertainty, ambiguity, and ignorance that surrounds nuclear energy. It will appeal to academics, students, and stakeholders in public policy or environmental studies who want to think critically and more broadly about how we approach energy generation and waste management.

  18. Environmental management practices in the Lebanese pharmaceutical industries: implementation strategies and challenges.

    Science.gov (United States)

    Massoud, May A; Makarem, N; Ramadan, W; Nakkash, R

    2015-03-01

    This research attempts to provide an understanding of the Lebanese pharmaceutical industries' environmental management strategies, priorities, and perceptions as well as drivers, barriers, and incentives regarding the implementation of the voluntary ISO 14001 Environmental Management System. Accordingly, a semistructured in-depth interview was conducted with the pharmaceutical industries. The findings revealed a significant lack of knowledge about the standard among the industries. The main perceived drivers for adopting the ISO 14001 are improving the companies' image and overcoming international trade. The main perceived barriers for acquiring the standard are the lack of government support and the fact that ISO 14001 is not being legally required or enforced by the government. Moreover, results revealed that adopting the ISO 14001 standard is not perceived as a priority for the Lebanese pharmaceutical industries. Although the cost of certification was not considered as a barrier for the implementation of ISO 14001, the majority of the pharmaceutical industries are neither interested nor willing to adopt the Standard if they are not exposed to any regulatory pressure or external demand. They are more concerned with quality and safety issues with the most adopted international standard among the industries being the ISO 9001 quality management system. This study highlights the aspect that financial barriers are not always the hurdles for implementing environmental management strategies in developing countries and underscores the need for regulatory frameworks and enforcement.

  19. Solid waste management in Khartoum industrial area

    International Nuclear Information System (INIS)

    Elsidig, N. O. A.

    2004-05-01

    This study was conducted in Khartoum industrial area (KIA). The study discusses solid waste generation issues in KIA as well as solid waste collection, storage, transport and final disposal methods. A focus on environmental impact resulting from the accumulation of solid waste was presented by reviewing solid waste management in developed as well as developing countries starting from generation to final disposal. Environmental health legislation in Sudan was investigated. The study covers all the (eight) industrial sub-sectors presented in KIA. The main objective of the study is to assess the situation of solid waste in KIA. To fulfill the objectives of the study the researcher deemed it necessary to explore problems related to solid waste generation and solid waste arrangement with special emphasis on final disposal methods. Practically, 31 (thirty-one) factories representing the different industrial sub-sectors in KIA were studied. This represents 25% of the total number of factories located in KIA. Data were obtained by, questionnaires, interviews and observations mainly directed to concerned officials, solid waste workers, pickers and brokers. Obtained data were stored, coded, tabulated and analyzed using the computer systems (excel and SPSS programmes). The obtained results should clear deficiency in the management of solid waste which led to great environmental deterioration in KIA and neighboring residential areas. The environment in studied area is continuously polluted due to high pollution loads and unproved solid waste management. In order to maintain health environment operating factories have to pretreated their solid waste according to the recognized standards and waste minimization techniques such as recycling and re use should be widely applied, moreover, running crash programme for environmental sanitation in Khartoum state should be expanded and improved to include special characteristics of solid waste from industries. Finally, increase awareness

  20. Operational energy management in the industrial production. Brief study; Betriebliches Energiemanagement in der industriellen Produktion. Kurzstudie

    Energy Technology Data Exchange (ETDEWEB)

    Hirzel, Simon; Sontag, Benjamin; Rohde, Clemens

    2011-09-15

    Increasing energy prices and raw material prices, an increased public interest in energy issues and new customer requirements result in a responsible utilization of energy as a resource. The energy management provides the opportunity to evaluate and assess energy flows. Measures for a better utilization of resources can be derived and implemented by means of an energy management system. Under this aspect, the authors of the contribution under consideration report on current issues and developments in the field of corporate energy management in industry as well as the future developments of energy management.

  1. The impact of the strategic factor in knowledge management projects in the consulting industry

    Directory of Open Access Journals (Sweden)

    Marta Mas-Machuca

    2008-10-01

    Full Text Available The projects of Knowledge Management in the consulting industry have become a necessity to obtain sustainable competitive advantages. Between all the factors that influence in the success of a Knowledge Management project, the strategic ones have a decisive weight according to existing literature. Although many studies raise the issue of strategy’s influence on Knowledge Management success, few have measured them. This paper aims to identify the elements that configure the strategic dimension and measure its contribution in order to maximize the profit. The research methodology is based on a Structural Equation Model to validate the hypothesis. The findings highlight the huge influence of strategy in Knowledge Management project’s success in the consultancy industry.

  2. Organizational culture and knowledge management in the electric power generation industry

    Science.gov (United States)

    Mayfield, Robert D.

    Scarcity of knowledge and expertise is a challenge in the electric power generation industry. Today's most pervasive knowledge issues result from employee turnover and the constant movement of employees from project to project inside organizations. To address scarcity of knowledge and expertise, organizations must enable employees to capture, transfer, and use mission-critical explicit and tacit knowledge. The purpose of this qualitative grounded theory research was to examine the relationship between and among organizations within the electric power generation industry developing knowledge management processes designed to retain, share, and use the industry, institutional, and technical knowledge upon which the organizations depend. The research findings show that knowledge management is a business problem within the domain of information systems and management. The risks associated with losing mission critical-knowledge can be measured using metrics on employee retention, recruitment, productivity, training and benchmarking. Certain enablers must be in place in order to engage people, encourage cooperation, create a knowledge-sharing culture, and, ultimately change behavior. The research revealed the following change enablers that support knowledge management strategies: (a) training - blended learning, (b) communities of practice, (c) cross-functional teams, (d) rewards and recognition programs, (e) active senior management support, (f) communication and awareness, (g) succession planning, and (h) team organizational culture.

  3. Education in Radioactive Waste Management: Issues of science, technology and society

    International Nuclear Information System (INIS)

    James, E.O.

    1993-01-01

    Public acceptance of matters relating to radioactive waste management can properly be sought through education, but what are the particulars to be considered and what is the strategy for success? The issues of science, technology and society which must be addressed are explored here and seen to be inextricably related, so that none of them can gain adequate attention except it be presented in the context of the others. Such issues include the concept of acceptable levels of risk, which must become familiar and applied with no greater severity to the nuclear industry than to other aspects of life

  4. Potential contaminants in the food chain: identification, prevention and issue management.

    Science.gov (United States)

    Scanlan, Francis P

    2007-01-01

    Contaminants are a vast subject area of food safety and quality. They are generally divided into chemical, microbiological and physical classes and are present in our food chain from raw materials to finished products. They are the subject of international and national legislation that has widened to cover more and more contaminant classes and food categories. In addition, consumers have become increasingly aware of and alarmed by their risks, whether rightly or not. What is the food industry doing to ensure the safety and quality of the products we feed our children? This is a valid question which this article attempts to address from an industrial viewpoint. Chemical food safety is considered a complex field where the risk perception of consumers is often the highest. The effects of chronic or acute exposure to chemical carcinogens may cause disease conditions long after exposure that can be permanently debilitating or even fatal. It is also a moving target, as knowledge about the toxicity and occurrence data of new chemical contaminants continues to be generated. Their identification, prevention and management are challenges to the food industry as a whole. A reminder of the known chemical hazards in the food chain will be presented with an emphasis on the use of early warning to identify potential new contaminants. Early warning is also a means of prevention, anticipating food safety concerns before they become issues to manage. Current best management practices including Hazard Analysis and Critical Control Points relating to the supply chain of baby foods and infant formulae will be developed. Finally, key lessons from a case study on recent contamination issues in baby food products will be presented.

  5. Managing complexity challenges for industrial engineering and operations management

    CERN Document Server

    López-Paredes, Adolfo; Pérez-Ríos, José

    2014-01-01

    This book presents papers by experts in the field of Industrial Engineering, covering topics in business strategy; modelling and simulation in operations research; logistics and production; service systems; innovation and knowledge; and project management. The focus of operations and production management has evolved from product and manufacturing to the capabilities of firms and collaborative management. Nowadays, Industrial Engineering is concerned with the study of how to design, modify, control and improve the performance of complex systems. It has extended its scope to any physical landscape populated by social agents. This raises a major challenge to Industrial Engineering:  managing complexity. This volume shows how experts are dealing with this challenge.

  6. Study of industry safety management

    International Nuclear Information System (INIS)

    Park, Pil Su

    1987-06-01

    This book deals with general remarks, industrial accidents, statistics of industrial accidents, unsafe actions, making machinery and facilities safe, safe activities, having working environment safe, survey of industrial accidents and analysis of causes, system of safety management and operations, safety management planning, safety education, human engineering such as human-machines system, system safety, and costs of disaster losses. It lastly adds individual protective equipment and working clothes including protect equipment for eyes, face, hands, arms and feet.

  7. Safety management in the industry

    International Nuclear Information System (INIS)

    Jaecklin, A.

    1996-01-01

    The safety management in the industry is characterised by the large number of processes and the materials used in them. Correspondingly large are the legal regulations. Through the thickets of today's controls, the industry moves inside a relatively tight network of technical regulations. The experience of environmental audits and industrial damage, however, shows that the greatest deficit lies in the organisational methods and less on the technical side. For the overcoming of risks one needs to recognise the weaknesses of a careful analysis. To this belongs the estimation of how far a possible scenario can be taken. The estimation of the possibilities of occurrence, however, comes up against particular problems in the industry, as the human factor in relationship with danger potentialities is very difficult to evaluate. Actual basic data or statistics are missing. This lack can only be made good with the building up of a safety management. The fundamental principles of such a management can be taken from the environmental management and especially from the standard for environmental management ISO 14001. Here it is important that safety management is integrated into the process-oriented business processes and thus becomes a part of the company culture. (author) 11 figs., tabs., 11 refs

  8. Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

    OpenAIRE

    Larissa A. R. U. Freitas; Alessandra Magrini

    2017-01-01

    The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ec...

  9. Management issues in automated audit analysis

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, K.A.; Hochberg, J.G.; Wilhelmy, S.K.; McClary, J.F.; Christoph, G.G.

    1994-03-01

    This paper discusses management issues associated with the design and implementation of an automated audit analysis system that we use to detect security events. It gives the viewpoint of a team directly responsible for developing and managing such a system. We use Los Alamos National Laboratory`s Network Anomaly Detection and Intrusion Reporter (NADIR) as a case in point. We examine issues encountered at Los Alamos, detail our solutions to them, and where appropriate suggest general solutions. After providing an introduction to NADIR, we explore four general management issues: cost-benefit questions, privacy considerations, legal issues, and system integrity. Our experiences are of general interest both to security professionals and to anyone who may wish to implement a similar system. While NADIR investigates security events, the methods used and the management issues are potentially applicable to a broad range of complex systems. These include those used to audit credit card transactions, medical care payments, and procurement systems.

  10. Resolving complex research data management issues in biomedical laboratories: Qualitative study of an industry-academia collaboration.

    Science.gov (United States)

    Myneni, Sahiti; Patel, Vimla L; Bova, G Steven; Wang, Jian; Ackerman, Christopher F; Berlinicke, Cynthia A; Chen, Steve H; Lindvall, Mikael; Zack, Donald J

    2016-04-01

    This paper describes a distributed collaborative effort between industry and academia to systematize data management in an academic biomedical laboratory. Heterogeneous and voluminous nature of research data created in biomedical laboratories make information management difficult and research unproductive. One such collaborative effort was evaluated over a period of four years using data collection methods including ethnographic observations, semi-structured interviews, web-based surveys, progress reports, conference call summaries, and face-to-face group discussions. Data were analyzed using qualitative methods of data analysis to (1) characterize specific problems faced by biomedical researchers with traditional information management practices, (2) identify intervention areas to introduce a new research information management system called Labmatrix, and finally to (3) evaluate and delineate important general collaboration (intervention) characteristics that can optimize outcomes of an implementation process in biomedical laboratories. Results emphasize the importance of end user perseverance, human-centric interoperability evaluation, and demonstration of return on investment of effort and time of laboratory members and industry personnel for success of implementation process. In addition, there is an intrinsic learning component associated with the implementation process of an information management system. Technology transfer experience in a complex environment such as the biomedical laboratory can be eased with use of information systems that support human and cognitive interoperability. Such informatics features can also contribute to successful collaboration and hopefully to scientific productivity. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  11. Training Issues for the European Automotive Industry

    NARCIS (Netherlands)

    Dankbaar, B.

    1996-01-01

    Provides an overview of the results of an investigation carried out for the European Commission. Aims to identify themes and issues in the field of continuing training in the European automotive industry. A large number of interviews were carried out in all the major car manufacturing countries of

  12. Training issues for the European automotive industry

    NARCIS (Netherlands)

    Dankbaar, B.

    1999-01-01

    Provides an overview of the results of an investigation carried out for the European Commission. Aims to identify themes and issues in the field of continuing training in the European automotive industry. A large number of interviews were carried out in all the major car manufacturing countries of

  13. Waste management '76 nuclear overview session industry viewpoint

    International Nuclear Information System (INIS)

    Carson, A.B.

    1976-01-01

    Lack of firm policy decisions and implementing regulations and program plans related to nuclear fuel cycle by-product wastes has become a major deterrent to progress in the constructive utilization of fission energy. In any event, the mismatch between waste management program accomplishments and perceived requirements has increased rather than decreased over recent years. Multi-agency programs and industry participation as well, at higher levels of effort than in the past, are required and are being initiated, but useful and lasting decisions still are some time off. From industry's viewpoint, all of the agency and industry programs related to waste management must be based on (a) a common view that no constructive activity is going to have zero personnel or environmental impact and that there generally will be a finite level of impact or risk to public health and safety that can be considered acceptable, and (b) consistent and rational consideration of what the levels of impact or risk are that can be considered acceptable in various circumstances. Regulatory requirements finally imposed must be related in some rational way to actual effects and their acceptable levels. Sound bases for timely decisions also require recognition of the fact that ''full and complete demonstration'' is not often really practical or necessary. Demonstration requirements for particular circumstances must be clearly defined and related to functional importance, extent of supporting technology and experience and other such rational factors. Finally, it is recognized that there are nontechnical issues the resolution of which are just as necessary to progress as the technical ones. However, such issues should not be allowed to lead to decisions or actions which are phenomenologically unsound or technically unsupported. After all, you might as well fall flat on your face as lean too far over backward

  14. METHODICAL APPROACHES TO THE COST MANAGEMENT OF INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Trunina Iryna

    2018-03-01

    Full Text Available Introduction. The paper deals with the actual issues of managing the costs of industrial enterprises, because in the conditions of an unstable market environment the financial performance depends on the efficiency of the cost management system, competitiveness, financial sustainability and investment attractiveness of any subject of economic activity. Purpose of the article is analys is of approaches to cost management, theoretical substantiation and development of recommendations regarding the formation of strategic cost management. Results. The economic content of cost management in the treatment of different authors and on different approaches: functional, process-oriented and system approaches has been considered. Their essence and features, the direction for operational or strategic management of expenses of the enterprise, ways of spending management in different approaches are determined. It is stated that all considered approaches to cost management of enterprises are aimed at optimal use of resources and ensuring the growth of the efficiency of enterprises. Conclusions. Based on the review of methodological approaches to cost management, recommendations are developed for expanding the implementation of cost management at various levels of enterprise management and the formation of strategic cost management within the framework of strategic management of an enterprise. The strategic cost management is complex category aimed at achieving a rational level of costs in the long run, which allows for the consideration of competitive cost advantages and increase the competitiveness of an industrial enterprise. The implementation of cost reduction strategies should be a constant and important part of the company’s work, while the strategy of cost reduction should be integrated into the overall business strategy of the enterprise.

  15. Industry Valuation Driven Earnings Management

    NARCIS (Netherlands)

    T. Jiao (Tao); G.M.H. Mertens (Gerard); P.G.J. Roosenboom (Peter)

    2007-01-01

    textabstractThis paper investigates whether industry valuation impacts firms’ earnings management decisions. Existing accounting literature assumes that industry valuation has a constant impact on this decision. We argue that a higher industry valuation increases the perceived benefits of earnings

  16. Issues Management Process Course # 38401

    Energy Technology Data Exchange (ETDEWEB)

    Binion, Ula Marie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-02-01

    The purpose of this training it to advise Issues Management Coordinators (IMCs) on the revised Contractor Assurance System (CAS) Issues Management (IM) process. Terminal Objectives: Understand the Laboratory’s IM process; Understand your role in the Laboratory’s IM process. Learning Objectives: Describe the IM process within the context of the CAS; Describe the importance of implementing an institutional IM process at LANL; Describe the process flow for the Laboratory’s IM process; Apply the definition of an issue; Use available resources to determine initial screening risk levels for issues; Describe the required major process steps for each risk level; Describe the personnel responsibilities for IM process implementation; Access available resources to support IM process implementation.

  17. Hazardous industrial waste management

    International Nuclear Information System (INIS)

    Quesada, Hilda; Salas, Juan Carlos; Romero, Luis Guillermo

    2007-01-01

    The appropriate managing of hazardous wastes is a problem little dealed in the wastes management in the country. A search of available information was made about the generation and handling to internal and external level of the hazardous wastes by national industries. It was worked with eleven companies of different types of industrial activities for, by means of a questionnaire, interviews and visits, to determine the degree of integral and suitable handling of the wastes that they generate. It was concluded that exist only some isolated reports on the generation of hazardous industrial wastes and handling. The total quantity of wastes generated in the country was impossible to establish. The companies consulted were deficient in all stages of the handling of their wastes: generation, accumulation and storage, transport, treatment and final disposition. The lack of knowledge of the legislation and of the appropriate managing of the wastes is showed as the principal cause of the poor management of the residues. The lack of state or private entities entrusted to give services of storage, transport, treatment and final disposition of hazardous wastes in the country was evident. (author) [es

  18. Management of Canadian mineral resources: an industry viewpoint

    Energy Technology Data Exchange (ETDEWEB)

    Powis, A

    1976-03-01

    Federal and provincial governments in Canada are developing strategies for a national mineral policy, the theme being to obtain optimum benefit for Canada from present and future use of minerals. The provisions of the British North America Act, the centerpiece of Canada's constitution, place ownership of natural resources under the jurisdiction of the province in which they are found, although it retains exclusive authority for the Federal government over the export and interprovincial trade of such resources. Contradiction and challenges are now being experienced between these two levels of government, resulting in excess taxation policies in the minerals industry. Mr. Powis discussed these issues at the 32nd Annual Conference of Provincial Ministers of Mines in Saskatoon on September 15, 1975. The roles of the private sector and governments, the Economic Council of Canada trade strategy report, the mineral area planning study, and the public and political perceptions are reviewed. Options for the future are summarized. Mr. Powis concludes that the atmosphere of confrontation in Canadian mineral policy leads to irrational management of Canadian resources; further, he sees a lack of communication between industry and government as complicating the issue. The Canadian mining industry also faces the other serious problems: (1) mining problems in inhospitable areas; (2) continuing difficulty in attracting and retaining trained labor forces; (3) increasing costs of exploration and transport; (4) competing with larger and more accessible deposits in other parts of the world; and (5) the impact of inflation in all areas of the industry. (MCW)

  19. Doing Projects in a Foreign Language — Communications Management, Issues and Strategies

    Science.gov (United States)

    Xian, Deling

    The Qinghai Salt Lake Industry Co. Ltd. (QSLIC) smelter project involves a Chinese state-owned client, a Canadian engineering company, their American technology partner, several Chinese design institutes and international vendors. Proper technical communication plays an important role during the development of a project in a foreign language and across cultures. Using the QSLIC project as an example, this paper presents the role of Communications Manager and personal qualifications required, as well as technical communications management, issues and strategies, lessons learnt while doing smelter projects in China and Chinese business culture and etiquette.

  20. Regulatory issues associated with exclusion, exemption, and clearance related to the mining and minerals processing industries

    International Nuclear Information System (INIS)

    Metcalf, P.; Woude, S. van der; Keenan, N.; Guy, S.

    1997-01-01

    The concepts of exclusion, exemption and clearance have been established in international recommendations and, standards for radiation protection and the management of radioactive waste in recent years. The consistent application of these concepts has given rise to various problems in different spheres of use. This is particularly the case in the mining and minerals processing industries dealing with materials exhibiting elevated concentrations of naturally occurring radionuclides. This paper takes the South African mining industry as an example and highlights some of the issues that have arisen in applying these concepts within a regulatory control regime. (author)

  1. Temporary workers in the nuclear power industry: implications for the waste management program

    International Nuclear Information System (INIS)

    Melville, M.H.

    1984-01-01

    The employment of large number of temporary workers has become a growing and permanent characteristic of the nuclear power industry. In order to stay within the limits governing individual exposure to radiation in the workplace, the occupational risk has been spread among a larger segment of the population. Temporary workers, who make up one-third of the industry's work force, bear a disproportionate share of half the total annual occupational radiation dose. At issue is whether temporary workers should be grouped with the public at large or with the nuclear industry's work force, whose maximum limits are at least 10 times higher. This issue is relevant at a time when the search for a way to manage the mounting radioactive wastes will increase both the permanent and temporary work force. 44 references, 4 figures, 4 tables

  2. Introduction to radioactive waste management issues in Wisconsin

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    This brief focused on wastes from commercial production of electricity and various industrial, medical and research applications of radioactive materials. Only traditionally solid wastes are dealt with. It was organized into five parts. Part I presented an introduction to radioactivity - what it is and the biological hazards associated with it. Federal regulation of the management of radioactive wastes was discussed in Part II. Existing state laws and bills currently before the Wisconsin Legislature were described in Part III. Part IV gave background information on specific areas of potential inquiry related to radioactive wastes in Wisconsin. Part V summarized the issues identified in the brief. 2 figures, 7 tables

  3. Scaling issues in sustainable river basin management

    Science.gov (United States)

    Timmerman, Jos; Froebich, Jochen

    2014-05-01

    Sustainable river basin management implies considering the whole river basin when managing the water resources. Management measures target at dividing the water over different uses (nature, agriculture, industry, households) thereby avoiding calamities like having too much, too little or bad quality water. Water management measures are taken at the local level, usually considering the sub-national and sometimes national effects of such measures. A large part of the world's freshwater resources, however, is contained in river basins and groundwater systems that are shared by two or more countries. Sustainable river basin management consequently has to encompass local, regional, national and international scales. This requires coordination over and cooperation between these levels that is currently compressed into the term 'water governance' . Governance takes into account that a large number of stakeholders in different regimes (the principles, rules and procedures that steer management) contribute to policy and management of a resource. Governance includes the increasing importance of basically non-hierarchical modes of governing, where non-state actors (formal organizations like NGOs, private companies, consumer associations, etc.) participate in the formulation and implementation of public policy. Land use determines the run-off generation and use of irrigation water. Land use is increasingly determined by private sector initiatives at local scale. This is a complicating factor in the governance issue, as in comparison to former developments of large scale irrigation systems, planning institutions at state level have then less insight on actual water consumption. The water management regime of a basin consequently has to account for the different scales of water management and within these different scales with both state and non-state actors. The central elements of regimes include the policy setting (the policies and water management strategies), legal setting

  4. Customer relationship management in the contract pharmaceutical industry: an exploratory study for measuring success.

    Science.gov (United States)

    Kros, John F; Nadler, Scott; Molis, Justin

    2007-01-01

    Managing customer relationships is a very important issue in business-to-business markets. This research investigates the growing number of available resources defining Customer Relationship Management (CRM) efforts, and how they are being applied within the Contract Pharmaceutical Manufacturing industry. Exploratory study results using face-to-face and telephone questionnaires based on four criteria for rating a company's CRM efforts are presented. Data was collected from large Contract Pharmaceutical Manufacturing companies in the US market. The results and conclusions are discussed relating how the Contract Pharmaceutical Manufacturing industry is implementing CRM including some potential steps to take when considering a CRM initiative.

  5. Issues confronting women participation in the construction industry

    OpenAIRE

    Aulin, Radhlinah; Jingmond, Monika

    2011-01-01

    This paper raises the issues confronting the minority cohort’s participation in the construction industry. Women in construction are seen as the wrong gender to be around for the construction occupations require not only manual dexterity but physical strength. Currently, the industry is employing less than 10% of the female in the workforce with even lower participation in crafts and trade. This paper discussed about the current women participation in construction focusing on the European Uni...

  6. Corrosion management in nuclear industry

    International Nuclear Information System (INIS)

    Kamachi Mudali, U.

    2012-01-01

    Corrosion is a major degradation mechanism of metals and alloys which significantly affects the global economy with an average loss of 3.5% of GDP of several countries in many important industrial sectors including chemical, petrochemical, power, oil, refinery, fertilizer etc. The demand for higher efficiency and achieving name plate capacity, in addition to ever increasing temperatures, pressures and complexities in equipment geometry of industrial processes, necessitate utmost care in adopting appropriate corrosion management strategies in selecting, designing, fabricating and utilising various materials and coatings for engineering applications in industries. Corrosion control and prevention is an important focus area as the savings achieved from practicing corrosion control and prevention would bring significant benefits to the industry. Towards this, advanced corrosion management strategies starting from design, manufacturing, operation, maintenance, in-service inspection and online monitoring are essential. At the Indira Gandhi Centre for Atomic Research (IGCAR) strategic corrosion management efforts have been pursued in order to provide solutions to practical problems emerging in the plants, in addition to innovative efforts to provide insight into mechanism and understanding of corrosion of various engineering materials and coatings. In this presentation the author highlights how the nuclear industry benefited from the practical approach to successful corrosion management, particularly with respect to fast breeder reactor programme involving both reactor and associated reprocessing plants. (author)

  7. Progress of environmental management and risk assessment of industrial chemicals in China.

    Science.gov (United States)

    Wang, Hong; Yan, Zhen-Guang; Li, Hong; Yang, Ni-Yun; Leung, Kenneth M Y; Wang, Yi-Zhe; Yu, Ruo-Zhen; Zhang, Lai; Wang, Wan-Hua; Jiao, Cong-Ying; Liu, Zheng-Tao

    2012-06-01

    With China's rapid economic growth, chemical-related environmental issues have become increasingly prominent, and the environmental management of chemicals has garnered increased attention from the government. This review focuses on the current situation and the application of risk assessment in China's environmental management of industrial chemicals. The related challenges and research needs of the country are also discussed. The Chinese government promulgated regulations for the import and export of toxic chemicals in 1994. Regulations for new chemical substances came into force in 2003, and were revised in 2010 based on the concept of risk management. In order to support the implementation of new regulations, Guidance for Risk Assessment of Chemicals is under development in an attempt to provide the concepts and techniques of risk assessment. With increasing concern and financial support from Chinese government, China is embarking on the fast track of research and development in environmental management of industrial chemicals. Copyright © 2011 Elsevier Ltd. All rights reserved.

  8. Product Category Management Issues

    OpenAIRE

    Żukowska, Joanna

    2011-01-01

    The purpose of the paper is to present the issues related to category management. It includes the overview of category management definitions and the correct process of exercising it. Moreover, attention is paid to the advantages of brand management, the benefits the supplier and retailer may obtain in this way. The risk element related to this topics is also presented herein. Joanna Żukowska

  9. PFP issues/assumptions development and management planning guide

    International Nuclear Information System (INIS)

    SINCLAIR, J.C.

    1999-01-01

    The PFP Issues/Assumptions Development and Management Planning Guide presents the strategy and process used for the identification, allocation, and maintenance of an Issues/Assumptions Management List for the Plutonium Finishing Plant (PFP) integrated project baseline. Revisions to this document will include, as attachments, the most recent version of the Issues/Assumptions Management List, both open and current issues/assumptions (Appendix A), and closed or historical issues/assumptions (Appendix B). This document is intended be a Project-owned management tool. As such, this document will periodically require revisions resulting from improvements of the information, processes, and techniques as now described. Revisions that suggest improved processes will only require PFP management approval

  10. An Analysis of Policy Issues in Natural Gas Industry Restructuring

    Energy Technology Data Exchange (ETDEWEB)

    Seo, J.K. [Korea Energy Economics Institute, Euiwang (Korea)

    2001-12-01

    This report explores controversial issues and problems that could emerge in the process of implementing the government's restructuring plan for natural gas industry and aims to suggest policy directions regarding the restructuring. To begin with, it examines current conditions surrounding natural gas industry including domestic demand and supply conditions, world LNG market trend, structural changes of the industry in OECD countries, possibilities of introducing effective competition and assignment of existing import contracts. In doing so, we probe whether the direction of the natural gas industry restructuring is proper and suggest that the results be reflected when a more detailed restructuring implementation plan is formulated. Also, this report suggests possible schemes related to major institutional changes expected by the basic restructuring plan and the detailed restructuring implementation plan announced by the government. First, it presents several alternative ways to properly divide up the import/wholesales section of Korea Gas Corporation. Second, it examines critical issues such as the method of using gas supply facilities and gas balancing mechanism, and presents adoptable alternatives for each issue. These issues constitute the core of network and market operation rules which need to be in place when adopting an open access system, which in turn is a prerequisite for sales competition. Third, the report examines price systems, including gas commodity pricing and rate-making design for transportation service, by first anticipating the direction of changes in gas rate regulation. Specifically, it presents possible ways to design the service rate for each function of pipeline network and import terminals, and discusses controversial issues in determining total cost-of-service and allocating the cost-of-service to each functional service offered such as distance-related rates, interruptible service rate. Lastly, in relation to the opening of retail

  11. Quality management of personnel in the nuclear industry: the human factor

    International Nuclear Information System (INIS)

    Tyror, J.G.

    1990-01-01

    The importance of research into understanding how plant operators can affect plant performance and plant safety is stressed in this general overview of the topic presented as an introduction to the conference. Three main interests are mentioned. The first concerns the relationship between the quality audit and the more specific issue of quality management as addressed by the safety audit. The second is safety and the link between safety, quality management and people which is shown by analysis of accidents in the industry. The third concern is the extent to which human failures are attributable to management systems and procedures rather than individual failings. (UK)

  12. Environmental and community issues and the mining industry

    International Nuclear Information System (INIS)

    Crowson, P.

    1998-01-01

    Much has been said and written in recent years about the greatly increased difficulties faced by the mining industry in meeting the expectations of local communities and in adequately protecting the natural environment. The impression is often given that the industry was completely oblivious of such concerns and needs until the present decade, and that it is now struggling to make up for past neglect. Certainly the standards required by society as a whole have risen, and there is more public discussion that in earlier times, but the management of many major mining companies have long been fully aware of their obligations to the environment and local communities. To argue otherwise would be to misread the history of the industry and to perform a grave disservice to many dedicated managers of the mining projects of former years. (author)

  13. Design Management in the Textile Industry

    DEFF Research Database (Denmark)

    Bang, Anne Louise

    2013-01-01

    In this paper we explore textile design activities and textile design management from an industrial network perspective. The textile industry is probably one of the most globalized manufacturing industries in the world and thus one of the most dispersed industries on the globe. Most studies...... on design management are framed inside the organisational context of the firm. In this study the role and practice of textile design is addressed in perspective of the global textile production network. The empirical data stems from six case studies exploring how different types of enterprises are organised...

  14. Industrial waste management - a case study at Attock oil refinery Ltd., Rawalpindi

    International Nuclear Information System (INIS)

    Ramay, M.I.; Hussain, S.; Tanveer, A.; Jabeen, Z.; Ehsann, S.

    2009-01-01

    As far as waste is concerned, industry has a two fold position: on the one hand industry produces waste during the production processes and on the other hand most of the industrial products become waste after being used. From environment perspective waste management and minimization at the source has become important issue all over the world. Waste minimization leading to cleaner production is the process and the policy of reducing the amount of waste produced by Industry at the source and remaining should be managed.The core objective of this research paper is to examine the impact of waste minimization, waste management and the planning of effective waste utilization that increases organizations profitability and green image. The case study will present the Recycle, Reuse, Reduce strategy that waste management is not only necessary to keep the environment healthy but it also brings the financial savings to the organization. It is obvious that there is significant relationship between waste management and profitability. Attock Refinery Limited (ARL) has done significant work in the field of industrial waste management. The stratified sampling has also used during a survey to gather primary data i.e. congregated by administering questionnaires to employees of different departments that shows positive attitude towards waste minimization and management. The interventions regarding industrial waste management are in full practice at ARL to meet the National Environmental Quality Standards. In 1993, prominent step has been taken to address the environmental issues and waste management. After carrying out the detailed survey of effluent waste water system during 1995-1996, Effluent Treatment Plants were installed to meet the NEQS. Keeping the continuity of efforts 'Zero Discharge' of effluent waste from the refinery was targeted. This project is recycling the waste water resulting environment conservation and saving money that was being spent for water pumping from

  15. Policy Pathways: Energy Management Programmes for Industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-06

    The IEA Policy Pathway publications provide details on how to implement specific recommendations drawn from the IEA 25 Energy Efficiency Policy Recommendations. This Policy Pathway, jointly produced by the International Energy Agency and the Institute for Industrial Productivity, develops the critical steps for policy makers implementing energy management programmes for industry. Optimising energy use in industry is essential to improve industrial competitiveness and achieve wider societal goals such as energy security, economic recovery and development, climate change mitigation and environmental protection.While there is significant potential to decrease energy consumption in this sector, opportunities to improve energy efficiency are still under-exploited. Energy management programmes have shown to be instrumental in addressing many of the barriers that inhibit wide-scale uptake of energy management in industry. The Policy Pathway builds on lessons learned from country experiences and provides actionable guidance on how to plan and design, implement, evaluate and monitor energy management programmes for industry.

  16. Incentive Issues in Information Security Management

    Science.gov (United States)

    Lee, Chul Ho

    2012-01-01

    This dissertation studies three incentive issues in information security management. The first essay studies contract issues between a firm that outsources security functions and a managed security service provider (MSSP) that provides security functions to the firm. Since MSSP and firms cannot observe each other's actions, both can suffer…

  17. IMPROVEMENT OF STRATEGIC MANAGEMENT OF THE INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    Anna E. Gorokhova

    2015-01-01

    Full Text Available The subject / topic: The subject of this article is very actual in the light of formation of post-industrial economy and need of improvement of methods, tools and mechanisms of management of economic subjects. The main reason for low efficiency of the industrial enterprises consists now that the developed stereotypes of managing and the applied methods of management don't conform to requirements of market economy. In article advantages of introduction of instruments of strategic management in activity of the industrial enterprises are considered.The purpose / objectives: The purpose of article is the analysis of the directions of improvement of strategic management of the industrial enterprise in modern economic conditions. Objectives of the article: To investigate differences of strategic management of the industrial enterprise from traditional, to analyse modern strategy of the industrial enterprises, to reveal their features and scopes.Methodology: A methodical basis of this article are comparative methods of the analysis.The Results: Difference of strategic management of the industrial enterprise from the traditional is investigated. Possibility of strategic development of the industrial companies only at systematic introduction of innovations is proved. Modern strategy of development of the industrial enterprises are analysed: modern strategy of development in retail networks of sales of mobile phones, outsourcing strategy, strategy of development of the company on the basis of a matrix «a growth / share of the market», strategy of fight for intellectual leadership, strategy of ecosystems of J. F. Moore; their features and scopes are revealed.Conclusions / significance: It is necessary to expand practical use of instruments of strategic management in activity of the industrial enterprises as they allow to increase management efficiency as a result of the accounting of opportunities and threats of environment and current state of the

  18. Risk management of knowledge loss in nuclear industry organizations

    International Nuclear Information System (INIS)

    2006-07-01

    Maintaining nuclear competencies in the nuclear industry and nuclear regulatory authorities will be one of the most critical challenges in the near future. As many nuclear experts around the world are retiring, they are taking with them a substantial amount of knowledge and corporate memory. The loss of such employees who hold knowledge critical to either operations or safety poses a clear internal threat to the safe and reliable operation of nuclear facilities. This publication is intended for senior and middle level managers of nuclear industry operating organizations and provides practical information on knowledge loss risk management. The information provided in this it is based upon the actual experiences of Member State operating organizations and is intended to increase awareness of the need to: develop a strategic approach and action plans to address the potential loss of critical knowledge and skills; provide processes and in conducting risk assessments to determine the potential for loss of critical knowledge caused by the loss of experienced workers; and enable nuclear organizations to utilize this knowledge to improve the skill and competence of new and existing workers In 2004, the IAEA published a report entitled The Nuclear Power Industry's Ageing Workforce: Transfer of Knowledge to the Next Generation (IAEA-TECDOC-1399). That report highlighted some of the knowledge management issues in Member States resulting from the large number of retiring nuclear power plant personnel who had been involved with the commissioning and initial operation of nuclear power plants. This publication complements that report by providing a practical methodology on knowledge loss risk management as one element of an overall strategic approach to workforce management which includes work force planning, recruitment, training, leadership development and knowledge retention

  19. The Importance of Enhancing Worldwide Industry Cooperation in Radiological Protection, Waste Management and Decommissioning - Views from the Global Nuclear Industry

    International Nuclear Information System (INIS)

    Saint-Pierre, S.

    2008-01-01

    The slow or stagnant rate of nuclear power generation development in many developed countries over the last two decades has resulted in a significant shortage in the population of mid-career nuclear industry professionals. This shortage is even more pronounced in some specific areas of expertise such as radiological protection, waste management and decommissioning. This situation has occurred at a time when the renaissance of nuclear power and the globalization of the nuclear industry are steadily gaining momentum and when the industry's involvement in international and national debates in these three fields of expertise (and the industry's impact on these debates) is of great relevance.This paper presents the World Nuclear Association (WNA) approach to building and enhancing worldwide industry cooperation in radiological protection, waste management and decommissioning, which is manifested through the activities of the two WNA working groups on radiological protection (RPWG) and on waste management and decommissioning (WM and DWG). This paper also briefly describes the WNA's participatory role, as of Summer 2005, in the International Atomic Energy Agency (IAEA) standard development committees on radiation safety (RASSC), waste safety (WASSC) and nuclear safety (NUSSC). This participation provides the worldwide nuclear industry with an opportunity to be part of IAEA's discussions on shaping changes to the control regime of IAEA safety standards. The review (and the prospect of a revision) of IAEA safety standards, which began in October 2005, makes this WNA participation and the industry's involvement at the national level timely and important. All of this excellent industry cooperation and team effort is done through 'collegial' exchanges between key industry experts, which help tackle important issues more effectively. The WNA is continuously looking to enhance its worldwide industry representation in these fields of expertise through the RPWG and WM and DWG

  20. A review study of maintenance and management issues in Malaysian commercial building towards sustainable future practice

    Science.gov (United States)

    Nawi, Mohd Nasrun Mohd; Baharum, Faizal; Ibrahim, Siti Halipah; Riazi, Salman Riazi Mehdi

    2017-10-01

    Good management of the building will be able to influence the quality of the buildings that remain long, safe and beautiful without any damage and problems. This research paper aims to explore the issue of maintenance and management that appear in managing the commercial building in Malaysian construction and property industry. The data in this research has been gathered through the reviewing process of secondary data such as journals, proceeding, thesis etc. in the area that related to maintenance and management issue in commercial building. As highlighted by previous study, building a good management can ensure that the facilities available in the building are well and meet the standard. Thus, exposure to the problems and needs in the management of the building would be able to improve the quality of building management systems to be more effective and fulfil the client needs and features.

  1. Organizing Global IS Management to Meet Competitive Challenges: Experiences from the Pharmaceutical Industry

    OpenAIRE

    Bettina Schwarzer

    1995-01-01

    Despite the widely acknowledged importance information technology plays in multinational corporations, many companies lack an understanding of when and how to (re)organize global IS management. The issues of timing and organization of global IS management, however, seem to be of utmost importance in a company’s attempt to implement a new, global business strategy. Based on three case studies from the pharmaceutical industry, this paper analyzes the sequence in which business strategy, organ...

  2. SAT project introduction: management issues

    International Nuclear Information System (INIS)

    Kazennov, A.Yu.

    1998-01-01

    Management issues of introducing SAT Project include main objectives and expectations; SAT goal and management; major phases of SAT implementation; project quality assurance; SAT based training system and procedures; role of the project team qualifications

  3. Management Model Applicable to Metallic Materials Industry

    Directory of Open Access Journals (Sweden)

    Adrian Ioana

    2013-02-01

    Full Text Available This paper presents an algorithmic analysis of the marketing mix in metallurgy. It also analyzes the main correlations and their optimizing possibilities through an efficient management. Thus, both the effect and the importance of the marketing mix, for components (the four “P-s” areanalyzed in the materials’ industry, but their correlations as well, with the goal to optimize the specific management. There are briefly presented the main correlations between the 4 marketing mix components (the 4 “P-s” for a product within the materials’ industry, including aspects regarding specific management.Keywords: Management Model, Materials Industry, Marketing Mix, Correlations.

  4. Knowledge management and organizational innovativeness in Iranian banking industry

    Directory of Open Access Journals (Sweden)

    Maryam Bidmeshgipour

    2012-12-01

    Full Text Available Knowledge management has changed its nature from theoretical concept to an instrument that assists innovativeness. The originality of this study lies in its purpose to explore issues of knowledge management and its relation to the innovativeness of organizations. The study focuses on three selected Iranian banks (in public and private sector, an industry and a setting that has received less attention by researches so far. This paper studies the effectiveness of managers’ mindset in leading or misleading the organizations to achieve organizational innovativeness through KM. Based on a questionnaire survey, the authors argue that applying knowledge management makes it simpler to achieve the innovativeness in organizations. What we found significant in this study is that employees, provided with appropriate training and mentoring opportunities to generate novel ideas, would create new services in banking. The mindset of bank managers about their human resources absorbs diversity of opinions and provides equal opportunity for all employees to present ideas.

  5. The Design of Integrated Logistics Management System of an Industrial Company

    Directory of Open Access Journals (Sweden)

    Hart Martin

    2017-01-01

    Full Text Available In the contemporary global business markets environment, when the business markets are getting more and more commercial, there are growing demand for effective management of material flows. The effectivity and effectiveness of planning, management and control the material flows across an industrial company and its distribution networks, represents one of the main pillar regarding the high level of competitive advantage within the frame of supply chains. Thus, the company information management system design should have also included a module of integrated logistics management system to ensure required level of material flow management effectivity and effectiveness. The article deals with brief description of the issues on company management, company information management systems and logistics management. Further it’s stated the methodology to created integrated logistics management system, which is containing the methodics to design logistics management sub-systems of purchasing, manufacturing, distribution and reverse material flows. The essential methodics of the stated methodology is the methodics to create independent demand forecasting sub-system.

  6. IT Systems in Aid of Welding Processes Quality Management in the Automotive Industry

    Directory of Open Access Journals (Sweden)

    Restecka M.

    2016-12-01

    Full Text Available The most important issue for the producers nowadays is to meet the requirements of customers, satisfying their perceived but also the unperceived needs. In order to control the quality of welding processes correctly one must have knowledge of welding drawings, symbols, designs of welded joints, welding procedures, requirements set in codes and standards, also have knowledge of the techniques of inspection and testing connected with the automotive industry. The article shows ways to increase quality in the industry through the use of robotization and computerization. Presented examples and application of IT systems in aid of welding processes quality management in the automotive industry.

  7. Social, ethical and moral issues in the implementation of radioactive waste management objectives

    International Nuclear Information System (INIS)

    Abrahamson, D.E.

    1976-01-01

    To date, the management of nuclear waste has included sizable releases to the environment. The economic result of these releases is opposed by the ethical issue. Questions of who will be responsible for the wastes are asked. The danger of trusting the experts is pointed out: information is withheld, data are suppressed, etc. The nuclear industry needs to restore confidence, but restoring competence must come first

  8. Challenges and Strength of Current Industrial Energy Efficiency Management Practices in Steam Industries

    Science.gov (United States)

    Nkosi, S. B.; Pretorius, J. H. C.

    2017-07-01

    The aim of this study is to achieve greater output by examining the existing way of coordinating the determined attempts of Steam Industries in South Africa to successfully reach a sustainable industrial development by using energy source adequately in a more competent way. Furthermore into the study we look at obstacles that prevent and those that leads to maximum utilization of energy management measures and also highlights the effects of implementing cheap available energy source in South Africa. The investigation and analysis have shown that energy is not well managed in Steam Industries and that the use of energy is minimized and not fully utilized due to poor management and lack of knowledge. Another detection was that lack of government structured and strategic measures of implementing and motivating the use of energy effectively. The effective and rational use of available power by Steam Industries in South Africa is a key player in developing a sustainable industrial development. The use of energy efficiency management strategies has contributed an increase in economic and improve environmentally friendly in the industrial sector. The slow pace adoption of energy saving and cost effective management programmes are negatively impacting on the benefits to Steam Industries in South Africa. In conclusion the study finds that the economy can be boosted by implementing energy efficiency management programmes and environmentally friendly. These will also stabilize the negative impact of energy raising prices.

  9. Managing the nation's high-level radioactive waste: key issues and recommendations

    International Nuclear Information System (INIS)

    1981-07-01

    To date, no unified national plan has been adopted to develop and implement a comprehensive system of management and disposal of high-level radioactive waste in the United States. Growing public concern about this problem has resulted in a number of recent efforts to develop a national high-level waste management policy. The 96th Congress strove to resolve the central issues, but ultimately failed to pass legislation, partly because of disagreements about the appropriate role of states in the siting of repositories for military waste. Outside government, a number of organizations convened representatives of diverse groups concerned with national high-level radioactive waste management to seek agreement on the major elements of national policy. One such organization was RESOLVE, Center for Environmental Conflict Resolution, which in May 1981 was merged into The Conservation Foundation. RESOLVE convened Forum II, a series of discussions among representatives of environmental, industrial, governmental, and citizen interest groups, in 1981 specifically to address the issues blocking Congressional agreement on high-level waste policy. This report contains the recommendations which resulted from these deliberations. Reprocessing, interim storage, respository development, and licensing requirements are addressed. Federal, state, and public participation in decision making are also discussed

  10. CHANGES OF SUPPLY CHAIN MANAGEMENT IN THE INFORMATION TECHNOLOGY INDUSTRY AS FUNCTION OF SUSTAINABLE DEVELOPMENT

    OpenAIRE

    Slobodan Acimovic; Dijana Krsic

    2014-01-01

    One of the world’s strongest industries – information technology (IT) industry, is constantly facing ever increasing need for change. A short life cycle of IT products and continuous investment in innovation (production, distribution, recycling) led to a significant evolution of supply chain management, where environmental issues are top priority.Through a completely new approach – high cooperation, partnerships, presence of many companies, more and more complex data and improved response tim...

  11. Risk management for industrial safety

    International Nuclear Information System (INIS)

    Novogno, A.

    1989-01-01

    The catastrophic accidents which have occurred in the last decade, in both developed and developing countries, have drawn the attention of decision-makers in the safety area to the urgent necessity to assess and manage risks from hazardous industrial activities which are concentrated in large industrialized areas. The aim of this paper is to review experience gained in conducting studies in the area of 'comparisons of risks in energy systems' and on the practical application of 'cost effectiveness of risk reduction analysis among different energy systems' (case studies). It is also the aim of the paper to discuss and propose a general framework for defining an 'integrated approach' to risk assessment and management in highly industrialized regions within a country. (author)

  12. Multinationals and global climate change. Issues for the automotive and oil industries

    International Nuclear Information System (INIS)

    Kolk, A.; Levy, D.

    2003-01-01

    This chapter analyzes the strategic responses by U.S. and European multinational enterprises (MNEs) in the oil and automobile industries to the global climate change issue. We examine and attempt to explain the differences across regions, across industries, and the changes over time. Traditional economic drivers of strategy do not provide a satisfactory account for these differences, and the chapter focuses instead on the conflicting institutional pressures on MNEs and the implications for their climate strategy. The home-country institutional context and individual corporate histories can create divergent pressures on strategy for MNEs based in different countries. At the same time, the location of MNEs in global industries and their participation in 'global issues arenas' such as climate change generate institutional forces for strategic convergence. It appears that local context influenced initial corporate reactions, but that convergent pressures predominate as the issue matures

  13. Reputationsorientiertes Themen- und Issues-Management : Konzeption, Regelbetrieb, Weiterentwicklung

    OpenAIRE

    Fahrenbach, Christian

    2011-01-01

    Die Dissertation untersucht, wie Organisationen ein reputationsorientiertes Themen- und Issues-Management aufbauen, betreiben und weiterentwickeln können. Dazu wird das operative Modell des Issues Managements mit dem strategischen Zielkonstrukt Reputation verbunden. Zu Beginn der Arbeit beschreiben zwei Theorie-Kapitel ausführlich Relevanz und die Steuerung von Reputation und im Issues Management. Auf dieser Basis wird ein praxisorientiertes integriertes Modell entwickelt. Es beschreibt da...

  14. Implementing of a system of industrial regulatory management in the Almaraz and Trillo; Implantacion de un sistema de gestion de la reglamentacion industrial en las centrales de Almaraz y Trillo

    Energy Technology Data Exchange (ETDEWEB)

    Yague, F.

    2011-07-01

    Nuclear Power Plants are complex facilities, which in addition to nuclear safety standards, apply a large number of general industrial regulations. they refer to issues such as design, construction, in-service inspection and decommissioning in various technical areas, affecting numerous equipment. Almaraz-Trillo NPP, has decided to address systematically the fulfilment of such regulations, by implementing a Management System of Industrial Regulation, aimed at continuous improvement and integrated in the organization ser of management mechanisms. (Author)

  15. Components of sustainability considerations in management of petrochemical industries.

    Science.gov (United States)

    Aryanasl, Amir; Ghodousi, Jamal; Arjmandi, Reza; Mansouri, Nabiollah

    2017-06-01

    Sustainability comprises three pillars of social, environmental, and economic aspects. Petrochemical industry has a great inter-related complex impact on social and economic development of societies and adverse impact on almost all environmental aspects and resource depletion in many countries, which make sustainability a crucial issue for petrochemical industries. This study was conducted to propose components of sustainability considerations in management of petrochemical industries.A combination of exploratory study-to prepare a preliminary list of components of sustainable business in petrochemical industries based on review of literature and Delphi-to obtain experts' view on this preliminary list and provide a detailed list of components and sub-components that should be addressed to bring sustainability to petrochemical industries, were used.Two sets of components were provided. First general components, which include stakeholders (staffs, society, and environment) with four sub-components, financial resources with 11 sub-components, improvement of design and processes with nine sub-components, policy and strategy of cleaner production with seven sub-components and leadership with seven sub-components. The second operational components included raw material supply and preparation with five, synthesis with ten, product separation and refinement with nine, product handling and storage with five, emission abatement with eight, and improvement of technology and equipment with 16 sub-components.

  16. Quality management in industry

    International Nuclear Information System (INIS)

    Saegesser, R.

    1992-01-01

    Using the example of the introduction of quality management in industry, the procedure in the Sulzer Concern is described. After an historical review, the principles of quality management drawn up at Sulzer, their implementation, the training from top to bottom and quality assurance used as an instrument of quality management are described. Supporting measures and the periphery are also mentioned. Finally, the initial experience gained from this introduction, which is not yet complete, is presented. 4 figs

  17. EFFECTIVE CRISIS MANAGEMENT FOR ISLAMIC FINANCIAL INDUSTRY AND THE INSTITUTION OF HISBAH: LESSONS FROM GLOBAL FINANCIAL CRISIS

    Directory of Open Access Journals (Sweden)

    Najeeb Zada

    2016-06-01

    Full Text Available The recent financial crisis resulted destructive effects on finance industry. Islamic financial industry (IFI is still naïve and largely untested in the face of a major financial turmoil. Major issues and uncertainties of the insolvency of IFI include the issue of moral hazard, government bailouts, excessive risk taking and deposit insurance. This paper addresses the issue of crisis management in IFI from the perspective of al-Siyasah al-Shar’iyyah and attempts to derive public policy guidelines that are useful in developing a timely and efficient crises management framework for Islamic finance industry. By using qualitative methods, the study found that the global financial crisis resulted in great destruction of financial institution. Although Islamic finance was quite immune to the global crisis as compared to its conventional peer, concerns still exist. It is time that Islamic finance industry learns from the financial woes of the rest of the world. =========================================== Krisis keuangan baru-baru ini mengakibatkan efek destruktif pada industri keuangan. Industri keuangan Islam (IKI masih naif dan sebagian besar belum teruji dalam menghadapi gejolak keuangan besar. Isu utama dan ketidakpastian dari kebangkrutan IKI meliputi moral hazard, dana talangan pemerintah, pengambilan risiko yang berlebihan dan asuransi deposito. Makalah ini membahas isu manajemen krisis dalam IKI dari perspektif al-Siyasah al-Shar'iyyah dan berusaha mendapatkan pedoman kebijakan publik yang bermanfaat dalam mengembangkan kerangka kerja manajemen krisis yang tepat waktu dan efisien bagi IKI. Dengan menggunakan metode kualitatif, studi ini menemukan bahwa krisis keuangan global mengakibatkan kehancuran besar bagi industri keuangan. Meskipun keuangan Islam cukup kebal terhadap krisis global dibandingkan dengan keuangan konvensional, kekhawatiran masih ada. Sudah saatnya industri keuangan Islam belajar dari krisis keuangan dari seluruh dunia.

  18. Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

    Directory of Open Access Journals (Sweden)

    Mohd Ayob Norizawati

    2014-01-01

    Full Text Available The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destination was tarnished a few years lately and new unfortunates incident in this year bring more damage to Malaysia image. Healthy issues, terrorism, Lahad Datu intrusion, repeated kidnapping and shooting in Sabah, twin airlines incident, riot and illegal demonstration and false reporting by international media brings new challenging to Malaysia. Although some incident may be had short-term impact to Malaysia tourism industry, but it’s still gave the big impact to Malaysia branding process. Many travellers and Malaysian itself still believe that Malaysia is a one of safer destination and country to visit and stayed in, but more outstanding efforts was require to make sure Malaysia tourism industry was capable to recover from this negative impact as soon as possible.

  19. E-waste Management and Refurbishment Prediction (EMARP) Model for Refurbishment Industries.

    Science.gov (United States)

    Resmi, N G; Fasila, K A

    2017-10-01

    This paper proposes a novel algorithm for establishing a standard methodology to manage and refurbish e-waste called E-waste Management And Refurbishment Prediction (EMARP), which can be adapted by refurbishing industries in order to improve their performance. Waste management, particularly, e-waste management is a serious issue nowadays. Computerization has been into waste management in different ways. Much of the computerization has happened in planning the waste collection, recycling and disposal process and also managing documents and reports related to waste management. This paper proposes a computerized model to make predictions for e-waste refurbishment. All possibilities for reusing the common components among the collected e-waste samples are predicted, thus minimizing the wastage. Simulation of the model has been done to analyse the accuracy in the predictions made by the system. The model can be scaled to accommodate the real-world scenario. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Environmental and waste management issues, causes, characteristics, and cures

    International Nuclear Information System (INIS)

    Duffy, L.P.

    1992-01-01

    The department of Energy (DOE) views as one of its most challenging problems the minimization, management, and cleanup of waste materials generated from Departmental operations. The challenges for the DOE have striking similarities to the environmental restoration and waste management challenges associated with energy production and the mining and mineral processing industries. Their challenges relate to uranium mining and the resulting mill tailings; decontamination and decommissioning of facilities; processing of nuclear materials and production of weapons components. Add to this the challenge of environmental restoration solutions for waste disposal practices of the past. The fundamental goal of the DOE is to ensure that risks to human health and safety and to the environment posed by the department's past, present, and future operations are either eliminated to reduced to prescribed levels by the year 2019. To achieve this goal they must be able to assess environmental and health impacts resulting from the low concentrations of contaminants. This paper presents an overview of the causes, characteristics, and cures for these environmental restoration and waste management issues

  1. Approaches of the German food industry for addressing the issue of food losses.

    Science.gov (United States)

    Richter, Beate; Bokelmann, Wolfgang

    2016-02-01

    In the food industry the subject of food losses is of great importance due to economic balance and an efficient application of resources as well as the development of an efficient food chain system. This paper presents the explorative results of a quantitative survey of leading companies of the German food industry to evaluate the relevance and handling of this issue. The investigation reveals that the topic food losses have a high significance in the food industry which will probably increase in future. A sample breakdown by branches indicates that the issue has the highest relevance for companies in the confectionery industry. These companies as well as those in the meat and fish industry want to consider the subject prospectively more powerful in their companies. Across the food industry, there is no communication to consumers of the efforts concerning food losses. And companies in the confectionery industry and in the fruit and vegetable industry rather want to engage more powerful in this topic if consumers' interest increases. But in order to minimize food losses at all stages along the supply chain, communication and collaboration at all stages is essential, especially the communication to consumers. Thus, it has to be verified whether a suitable communication can lead to advantages in competition and become an important issue for companies to differentiate from competitors. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Trends in risk management in nuclear industry

    International Nuclear Information System (INIS)

    Kim, Inn Seock

    1996-01-01

    Safety management may be classified into three dimensions: risk management, accident management, and emergency management. This paper addresses the recent trends of safety management in nuclear industry, focussing on risk management and accident management

  3. Gap analysis of industrial energy management systems in Slovenia

    International Nuclear Information System (INIS)

    Pusnik, Matevz; Al-Mansour, Fouad; Sucic, Boris; Gubina, A.F.

    2016-01-01

    Industrial energy management systems, which comprise software solutions, upfront services, and ongoing monitoring and management, enable industrial companies to actively manage their energy consumption and energy procurement activities. Energy management systems are usually tailored to the specific industrial needs but may offer limited functionalities, mostly as a result of different identified gaps (process simplifications, improper measurement points, a lack of motivation, etc.). A survey was conducted in order to analyse the gaps and use of energy management systems in Slovenian industry. The results of the survey presented in this paper demonstrate that the use of energy management systems in industry is recognised as a potential competitive advantage by most of the addressed companies. Furthermore, motivation was highlighted as an important prerequisite for process and structural improvements and reported to be thus far insufficiently addressed. Furthermore, the importance of strong cooperation with actors at different levels of industry, namely the executive and shop floor levels, is addressed. In the conclusion, possibilities for new opportunities in the exploitation of energy efficiency through the use of industrial energy management systems are discussed. - Highlights: • Investigating gaps and evaluation of EMS use in Slovenian industry. • Analysis based on the developed self-assessment tool 3EMT. • Existing EMS do not include all the requirements for the industrial operations. • Constructive cooperation between all stakeholders is of crucial importance.

  4. Human Resource Management in Sports: A Critical Review of its Importance and Pertaining Issues

    Directory of Open Access Journals (Sweden)

    Weerakoon Ranjan Kumara

    2016-03-01

    Full Text Available This paper will illustrate the meaning and importance of human resource management (HRM, human resource planning, and strategic human resource management, which are critically important for an organization’s effectiveness and must be effectively managed (Doherty, 1998. This study used the literature review method to acquire its final results. The relevant HRM literature review was done according to the purpose of the study. It used the purposive random sample method for selecting relevant literature. This study shows the current economic environment in the sports industry; the second part of the study critically analyzes the value of the strategic management of employees for the effective and efficient operation of sports organizations. It also critically evaluates human resource planning and other pertinent issues in terms of legislation, recruitment, selection, training, induction, and reward management from different international examples in sports management. Over the past few decades, increasing competition, globalization, and continuous changes in the market and in technology have emphasized the need to rethink the management of the organization and of human resources for the sake of overcoming significant challenges (Taylor et al., 2006. Therefore, managers should use strategic human resource management to overcome significant issues and to form well-planned strategies so that the organization may succeed.

  5. Road to excellence through industry self-management

    International Nuclear Information System (INIS)

    Miller, J.H. Jr.

    1985-01-01

    In March 1984, nuclear utilities in the US took the initiative to make regulations in management and people-related areas unnecessary, as such regulations would interfere with our ability to manage ourselves. Such an initiative is the Nuclear Utility Management and Human Resources Committee (NUMARC), which was formed because the authors believe the electric utility industry is best capable of managing itself. NUMARC works with the US Nuclear Regulatory Commission (NRC) and its staff to develop a new approach to improving management and people-related areas of nuclear plant operation. In a recent NRC policy statement on training and qualification, the NRC recognized that the industry, through the initiatives of NUMARC and the Institute of Nuclear Power Operations (INPO), has made progress in developing programs to improve nuclear utility training and personnel qualification. It also recognized the importance of the industry's initiative and encouraged further self-improvement. The NRC stated it will refrain from new rulemaking in the area of training for a minimum of 2 yr, while monitoring industry efforts

  6. Multinationals and global climate change. Issues for the automotive and oil industries

    Energy Technology Data Exchange (ETDEWEB)

    Kolk, A.; Levy, D.

    2003-07-01

    This chapter analyzes the strategic responses by U.S. and European multinational enterprises (MNEs) in the oil and automobile industries to the global climate change issue. We examine and attempt to explain the differences across regions, across industries, and the changes over time. Traditional economic drivers of strategy do not provide a satisfactory account for these differences, and the chapter focuses instead on the conflicting institutional pressures on MNEs and the implications for their climate strategy. The home-country institutional context and individual corporate histories can create divergent pressures on strategy for MNEs based in different countries. At the same time, the location of MNEs in global industries and their participation in 'global issues arenas' such as climate change generate institutional forces for strategic convergence. It appears that local context influenced initial corporate reactions, but that convergent pressures predominate as the issue matures.

  7. Environmental Management and Sustainable Labels in the Ski Industry: A Critical Review

    Directory of Open Access Journals (Sweden)

    Stefano Duglio

    2016-08-01

    Full Text Available Sustainability is increasing in importance in relation to the competitiveness of winter tourism, particularly when considering mountain destinations. Exploring in more detail winter tourism related to ski resorts, operators are especially concerned about environmental issues caused by climate change. Therefore, they have gradually become aware of the importance of finding adequate solutions to cope with such issues as well as being able to sensitize tourists. The main goal of this paper is to analyze the different sustainable tools that can be adopted by the ski industry. In this field there appear to be two main approaches. The first line is that of sustainable labels being applied to local ski resorts; whereas the second consists in operators—such as the managers of cable cars—making use of specific labels or management systems that are environmentally oriented.

  8. Improving the Management of Innovative Development of Industrial Production According to Industry Specifics

    Directory of Open Access Journals (Sweden)

    Papizh Yuliia S.

    2018-03-01

    Full Text Available The problem of improvement of management efficiency of innovative development of industrial enterprises in modern economic conditions is indicated. The dynamics of innovative processes in Ukraine together with volumes of innovative activity of domestic enterprises are analyzed. The basic principles of formation and efficient functioning of the organizational-economic mechanism of innovative development of industrial production are substantiated. The branch specificity in management of innovative development of coal enterprises is identified. Directions of improvement of the organizational-economic mechanism of management of innovative development of enterprises of coal industry are defined. The basic principles of introduction of the mechanism for stimulation of innovative development of enterprises of coal industry are suggested.

  9. Managing corporate capabilities:theory and industry approaches.

    Energy Technology Data Exchange (ETDEWEB)

    Slavin, Adam M.

    2007-02-01

    This study characterizes theoretical and industry approaches to organizational capabilities management and ascertains whether there is a distinct ''best practice'' in this regard. We consider both physical capabilities, such as technical disciplines and infrastructure, and non-physical capabilities such as corporate culture and organizational procedures. We examine Resource-Based Theory (RBT), which is the predominant organizational management theory focused on capabilities. RBT seeks to explain the effect of capabilities on competitiveness, and thus provide a basis for investment/divestment decisions. We then analyze industry approaches described to us in interviews with representatives from Goodyear, 3M, Intel, Ford, NASA, Lockheed Martin, and Boeing. We found diversity amongst the industry capability management approaches. Although all organizations manage capabilities and consider them to some degree in their strategies, no two approaches that we observed were identical. Furthermore, we observed that theory is not a strong driver in this regard. No organization used the term ''Resource-Based Theory'', nor did any organization mention any other guiding theory or practice from the organizational management literature when explaining their capabilities management approaches. As such, we concluded that there is no single best practice for capabilities management. Nevertheless, we believe that RBT and the diverse industry experiences described herein can provide useful insights to support development of capabilities management approaches.

  10. A Future-Oriented, Globally Based Curriculum Model for Industrial Technology.

    Science.gov (United States)

    Hacker, Michael

    1982-01-01

    Presents a future-oriented curriculum approach for industrial technology programs. Major global issues provide the basic structure for curriculum development. These issues include energy management, resource management, technological advancement, and international relations. Rationales for industrial technology are discussed and a curriculum…

  11. Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry

    OpenAIRE

    Yoon, Seok J.; Lin, Hsing K.; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

    2013-01-01

    Background: The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. Methods: The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became ...

  12. Management Practice of Supply Chain Quality Management in Service-oriented Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Gu Ping

    2017-01-01

    Full Text Available Supply chain quality management (SCQM in service-oriented manufacturing industries is needed in delivering value to customers in all process of supply chain management based on total quality management (TQM. In the paper, we identify the latest themes through reviewing prior quality management and supply chain management(SCM literature. In particular, we find manufacturing firms transform from providing products towards providing services, which means they need to go through fundamental changes especially in supply chains. We use a case study of Heilan Home to illustrate the SCQM themes and their ways in industrial practice. Based on our research, the case study, the experience of working with this firm, we propose a SCQM performance evaluation framework, as well as four strategies for other industries to improve customer satisfaction and added value. In this way can promote the transformation and upgrading of the manufacturing industry in the perspective of quality.

  13. Behavioral issues in operations management new trends in design, management, and methodologies

    CERN Document Server

    2013-01-01

    Behavioral Operations Management  has been identified in the last years as one of the most promising emerging fields in Operations Management. Behavioral Issues in Operations Management  explains and examines up-to-date research in this field, which works to analyze the impact of human behavior on the management of complex operating systems.   A collection of studies from leading scholars presents different methodologies and approaches, supported by real data and case studies. Issues such as building trust and strong cooperative relationships with suppliers, enhancing motivation and designing proper incentives for stimulating more effective decision maker behaviours are considered. The main decision-making processes affected by behavioral issues are also analyzed with a focus on new product development, logistics, and supply chain integration.   The broad coverage of methodologies and practical implications makes Behavioral Issues in Operations Management an ideal reference for both researchers developing...

  14. Issues for small businesses with waste management.

    Science.gov (United States)

    Redmond, Janice; Walker, Elizabeth; Wang, Calvin

    2008-07-01

    Participation by small and medium enterprise (SME) in corporate social responsibility issues has been found to be lacking. This is a critical issue, as individually SMEs may have little impact on the environment but their collective footprint is significant. The management style and ethical stance of the owner-manager affects business decision making and therefore has a direct impact on the environmental actions of the business. Although adoption of environmental practices to create competitive advantage has been advocated, many businesses see implementation as a cost which cannot be transferred to their customers. After a brief review of pertinent literature this paper reports on an exploratory investigation into the issue. Results show that whereas owner-managers of small enterprises express concern regarding the environment, this does not then translate into better waste management practices.

  15. Qualitative study on maintenance management in Moroccan industries

    Science.gov (United States)

    Naji, Amal; El Oumami, Mohamed; Bouksour, Otmane; Beidouri, Zitouni

    2018-05-01

    Maintenance management is, and has been studied in depth, especially for strategies to be implemented in industry, even though, authors note that there is a gap between literature and management adopted by industries. In this paper, we present a qualitative study in five Moroccan industries to investigate “how maintenance is managed” rather than “how it should be”. The questionnaire utilized for the study consists on semi-structured and open-ended questions. We consider factors and variables related to maintenance management and we explore the relationships between those factors. The original contribution of this paper is to provide a «real view »about maintenance management in Moroccan industries, which could help to improve understanding of barriers to implementing maintenance strategy.

  16. APPROACHES TO IMPLEMENTATION OF AN INTEGRATED MANAGEMENT SYSTEM IN THE PHARMACEUTICAL INDUSTRY. GALENICAL PHARMACEUTICAL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Ershova Elena Vladimirovna

    2015-10-01

    Full Text Available This article reviews the issues associated with development of an integrated quality management system and its implementation into a galenical pharmaceutical company. Recently, the Russian pharmaceutical industry has been developing extensively: pharmaceutical clusters are being formed, new and innovative technologies are being developed. For the enterprises producing galenical pharmaceutical products, which feature low prices and a high level of competition, development and implementation of management systems is a way to prove their competitiveness. The purpose of this article is to review the architecture and the key elements of integrated management systems for pharmaceutical enterprises, develop an integrated management system in terms of the upcoming revision of ISO 9001:2015, as well as to describe the benefits of implementation of such systems. The presented approach is the result of an educational project implemented within the framework of the MBA programme in "Master of Business Administration (MBA" in the Federal State Budgetary Educational Institution of Continuing Professional Education Pastukhov State Academy of Industrial Management.

  17. The changing structure of the electric power industry: Selected issues, 1998

    International Nuclear Information System (INIS)

    1998-07-01

    More than 3,000 electric utilities in the United States provide electricity to sustain the Nation's economic growth and promote the well-being of its inhabitants. At the end of 1996, the net generating capability of the electric power industry stood at more than 776,000 megawatts. Sales to ultimate consumers in 1996 exceeded 3.1 trillion kilowatthours at a total cost of more than $210 billion. In addition, the industry added over 9 million new customers during the period from 1990 through 1996. The above statistics provide an indication of the size of the electric power industry. Propelled by events of the recent past, the industry is currently in the midst of changing from a vertically integrated and regulated monopoly to a functionally unbundled industry with a competitive market for power generation. Advances in power generation technology, perceived inefficiencies in the industry, large variations in regional electricity prices, and the trend to competitive markets in other regulated industries have all contributed to the transition. Industry changes brought on by this movement are ongoing, and the industry will remain in a transitional state for the next few years or more. During the transition, many issues are being examined, evaluated, and debated. This report focuses on three of them: how wholesale and retail prices have changed since 1990; the power and ability of independent system operators (ISOs) to provide transmission services on a nondiscriminatory basis; and how issues that affect consumer choice, including stranded costs and the determination of retail prices, may be handled either by the US Congress or by State legislatures

  18. The changing structure of the electric power industry: Selected issues, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    More than 3,000 electric utilities in the United States provide electricity to sustain the Nation`s economic growth and promote the well-being of its inhabitants. At the end of 1996, the net generating capability of the electric power industry stood at more than 776,000 megawatts. Sales to ultimate consumers in 1996 exceeded 3.1 trillion kilowatthours at a total cost of more than $210 billion. In addition, the industry added over 9 million new customers during the period from 1990 through 1996. The above statistics provide an indication of the size of the electric power industry. Propelled by events of the recent past, the industry is currently in the midst of changing from a vertically integrated and regulated monopoly to a functionally unbundled industry with a competitive market for power generation. Advances in power generation technology, perceived inefficiencies in the industry, large variations in regional electricity prices, and the trend to competitive markets in other regulated industries have all contributed to the transition. Industry changes brought on by this movement are ongoing, and the industry will remain in a transitional state for the next few years or more. During the transition, many issues are being examined, evaluated, and debated. This report focuses on three of them: how wholesale and retail prices have changed since 1990; the power and ability of independent system operators (ISOs) to provide transmission services on a nondiscriminatory basis; and how issues that affect consumer choice, including stranded costs and the determination of retail prices, may be handled either by the US Congress or by State legislatures.

  19. What about radioactive waste management in the reorganization of the Russian nuclear industry?

    International Nuclear Information System (INIS)

    Krone, Juergen

    2008-01-01

    Even in the light of rising government revenues, the expansion of the Russian nuclear industry cannot be considered on safe grounds as far as funding is concerned. Decisions about new investments depend on proof that nuclear power is by far more profitable than investments into the development of new gas fields. For a long time, the way in which the unsolved issues of radioactive waste management were to be integrated into the reorganization of the Russian nuclear industry was an open question. Current developments demonstrate the efforts made by the Rosatom management to establish a sound basis for the sustainable management of radioactive waste. In late June 2008, the committees of the Russian parliament started deliberations of the draft legislation introduced by Rosatom about the management of radioactive waste, which includes the legal prerequisites for a sustainable national waste management system. The government-operated waste management company, FGUP 'RosRAO' (Sole Federal Government Enterprise, 'Russian Radioactive Waste'), was founded as a Rosatom subsidiary henceforth to be responsible also for the final storage of radioactive waste. Mainly recommendations of the R4.04/04, 'Strategy Definition for Russian Federation NPP Back End Radioactive Waste Management, including Draft Legislation and Institutional Framework', Tacis project were taken up, which had been elaborated by a consortium of 6 West European waste management organizations in close cooperation with Russian experts from Rosatom. The analysis conducted is described in an outline of the present situation of radioactive waste management in Russia and the recommendations derived from it. In addition, the most recent steps towards building a sustainable government-operated management system for radioactive waste of the Russian nuclear industry are explained. (orig.)

  20. MANAGING THE DEVELOPMENT OF AGRO-INDUSTRIAL CLUSTERS

    Directory of Open Access Journals (Sweden)

    D. V. Zavyalov

    2018-01-01

    Full Text Available Purpose: the purpose of the research is to design a concept of management system for agro-industrial clusters as self-organizing systems. The transition to a new technological way was marked not only by breakthrough solutions in the organization of production of goods, works and services, but also by the emergence of new (in some cases unique forms of inter-firm cooperation and interaction of economic agents in the real and financial sector of the economy. The concept of "digital economy" becomes the most important in economic research, and moreover - from a practical point of view, modern digitalization technologies in managing the activities of economic entities form new information and communication platforms for economic and scientific exchange. The penetration of digital technologies into life is one of the characteristic features of the future world. Not an exception is the agro-industrial sector, which is both strategically important for ensuring food security and has a high export potential. The article presents the concept of managing the development of agro-industrial clusters as self-organizing systems capable of integrating the activities of small and medium-sized businesses into the value-added chain based on modern information technologies. The obligatory and providing tools, mechanisms for implementing the concept, aimed at eliminating existing problems on the way of forming agro-industrial clusters, are disclosed.Methods: the agro-industrial cluster management model is developed using the methods of economic analysis and synthesis, and functional modelling.Results: conceptual model of cluster development management is presented to be used for the nascent clusters and the development of existing agro-industrial clusters.Conclusions and Relevance: as a result of the conducted research the reasons interfering development of cluster approach in the agroindustrial sector of economy are defined. Among them the main are: lack of

  1. An Integrative Model of the Strategic Management Accounting at the Enterprises of Chemical Industry

    Directory of Open Access Journals (Sweden)

    Aleksandra Vasilyevna Glushchenko

    2016-06-01

    Full Text Available Currently, the issues of information and analytical support of strategic management enabling to take timely and high-quality management decisions, are extremely relevant. Conflicting and poor information, haphazard collected in the practice of large companies from unreliable sources, affects the effective implementation of their development strategies and carries the threat of risk, by the increasing instability of the external environment. Thus chemical industry is one of the central places in the industry of Russia and, of course, has its specificity in the formation of the informationsupport system. Such an information system suitable for the development and implementation of strategic directions, changes in recognized competitive advantages of strategic management accounting. The issues of the lack of requirements for strategic accounting information, its inconsistency in the result of simultaneous accumulation in different parts and using different methods of calculation and assessment of indicators is impossible without a well-constructed model of organization of strategic management accounting. The purpose of this study is to develop such a model, the implementation of which will allow realizing the possibility of achieving strategic goals by harmonizing information from the individual objects of the strategic account to increase the functional effectiveness of management decisions with a focus on strategy. Case study was based on dialectical logic and methods of system analysis, and identifying causal relationships in building a model of strategic management accounting that contributes to the forecasts of its development. The study proposed to implement an integrative model of organization of strategic management accounting. The purpose of a phased implementation of this model defines the objects and tools of strategic management accounting. Moreover, it is determined that from the point of view of increasing the usefulness of management

  2. Proceedings of international symposium on selection and human resources management in nuclear industries

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    The twelve papers presented at the symposium cover the following topics: the professional, legal and ethical issues raised by behavioral screening for unescorted access to nuclear power plants; a psychologically developed system for access screening of vendor and owner applicants; validity generalization and situational specificity for reactor operators; a managers' activity survey; a management assessment center for utility managers; the TVA Management Development Plan; Goodyear Atomic Corporation's Management Development Program; a strategy for the enhancement of management and communications in nuclear power plants; curriculum guides for career path training for plant operations personnel; a series of training programs in technical supervisory skills for plant personnel; and proposed standards for the evaluation of industrial and academic credits in operator readiness. Course guidelines are included; surveys are depicted in tables and graphs

  3. Resource industries and security issues in northern Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Flanagan, T. [Calgary Univ., AB (Canada). Dept. of Political Science

    2009-06-15

    Public concern over global warming has led to many political attacks on the oil industry, particularly Alberta's tar sand industry. This document focused on security issues in northern Alberta and reviewed past incidences of security threats. The likelihood of sabotage to wells, pipelines, buildings, and other industry facilities was assessed. Five potential sources of opposition were identified, notably individual saboteurs, eco-terrorists, mainstream environmentalists, First Nations, and the Metis people. All except the Metis have at various times used some combination of litigation, blockades, boycotts, sabotage, and violence against economic development projects. This report stated that although such incidents will likely continue in the future, it is unlikely that extra-legal obstruction will become widespread unless these various groups cooperate with each other. Since these groups have different social characteristics and conflicting political interests, it is unlikely that such cooperation will occur. 34 refs.

  4. Industrial energy-flow management

    International Nuclear Information System (INIS)

    Lampret, Marko; Bukovec, Venceslav; Paternost, Andrej; Krizman, Srecko; Lojk, Vito; Golobic, Iztok

    2007-01-01

    Deregulation of the energy market has created new opportunities for the development of new energy-management methods based on energy assets, risk management, energy efficiency and sustainable development. Industrial energy-flow management in pharmaceutical systems, with a responsible approach to sustainable development, is a complex task. For this reason, an energy-information centre, with over 14,000 online measured data/nodes, was implemented. This paper presents the energy-flow rate, exergy-flow rate and cost-flow rate diagrams, with emphasis on cost-flow rate per energy unit or exergy unit of complex pharmaceutical systems

  5. Time to settle the tax issue for the resource industry

    International Nuclear Information System (INIS)

    Mintz, J.M.

    2001-01-01

    This report presented a brief comment on policy issues concerning taxes imposed on the resource industry. It was suggested that if the resource industry in Canada is to remain competitive beyond the current boom, the federal government should provide a more stable tax environment for investment in the longer run. With the current internationally competitive tax rates and high neutrality among energy sectors, there is presently a unique opportunity to settle this issue and to improve the tax system as a whole. It was suggested that the federal corporate income tax rate on resource profits should be reduced from 28 per cent to 21 per cent as it is in other sectors. It was also suggested that the resource allowance should be replaced with deductibility for resource royalties as payment for the cost of using provincially owned resources. This report also described other changes that could be implemented to improve the tax system and to enhance the competitiveness of the resource sector. It was noted that the changes could result in a single corporate income tax rate on all industrial activities by 2005

  6. Assessment of logistic outlays in industrial solid waste management

    Directory of Open Access Journals (Sweden)

    Janusz Grabara

    2014-12-01

    Full Text Available Out of concern for environmental protection is an increasingly common practice. Companies thus have an additional task which is the correct organization of the industrial waste management. This is achieved through the use of logistics processes in industrial waste management, mainly such as warehousing, transport, storage and recovery. These processes involve the formation of logistics costs resulting from waste management. The paper presents a mathematical model for cost of logistics management of industrial waste resulting from the above-mentioned processes. It also shows the interpretation of these costs and the relations between them. The model can increase costefficiency in companies managing industrial waste, while increasing attention to the environment.

  7. Management of industrial solid residues; Gerenciamento de residuos solidos industriais

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This chapter gives an overview on the management of industrial solid wastes, approaching the following subjects: classification of industrial solid residues; directives and methodologies for the management of industrial solid residues; instruments for the management of industrial solid residues; handling, packing, storage and transportation; treatment of industrial solid residues; final disposal - landfill for industrial residues; the problem of treatment and final disposer of domestic garbage in Brazil; recycling of the lubricant oils used in brazil; legislation.

  8. Ethical issues faced by clinician/managers in resource-allocation decisions.

    Science.gov (United States)

    Lemieux-Charles, L; Meslin, E M; Aird, C; Baker, R; Leatt, P

    1993-01-01

    This article explores the ethical issues faced by clinicians with management responsibilities (clinician/managers) when making decisions related to resource allocation and utilization at a Canadian teaching hospital. Using a focus group method, 28 individuals participated in four homogeneous groups that included nurse managers, managers from other professional groups, and physician managers. Ethical issues that recurred throughout the discussions included fairness, concern with preventing harm, consumer/patient choice, balancing needs of different groups of patients, conflict between financial incentives and patient needs, and professional autonomy. The particular issue of conflict is analyzed from two perspectives--a theory of professional-bureaucratic roles and of obligation--that illustrate how both management and philosophical issues are related. The findings suggest that decentralizing resource allocation and utilization decisions does raise ethical issues for clinician/managers and that a better understanding of these issues can be obtained using an interdisciplinary perspective.

  9. Academia-Industry Nexus Management

    Directory of Open Access Journals (Sweden)

    Sergej Gricar

    2016-12-01

    Full Text Available The aim of this study is to discuss the importance of co-operation and separation between academia and industry. The academiaindustry partnership is a feasible factor that affects innovations with students’ transition to the job market. The empirical material was collected and analysed on the basis of data gathered by Slovene Human Resources Development and Scholarship Fund. The data applies to several academic-industry network projects founded by the aforementioned organisation. The case study of the survey outlines four project cases conducted by Faculty of Business, Management and Informatics. The results reveal exercises to exchange expertise and experience, helping the industry to become more competitive whilst offering students better employability and career prospects.

  10. Value creation in industrial heritage management. Evidence from the City of Paper (Fabriano, Italy

    Directory of Open Access Journals (Sweden)

    Mara Cerquetti

    2017-12-01

    Full Text Available The paper discusses the open, inclusive, dynamic, proactive notion of cultural heritage that is emerging in the international scientific debate. Some significant innovations are examined first: the overcoming of the dualism between tangible and intangible cultural heritage, the increasing role of local communities in the processes of heritage recognition, safeguarding and enhancement and the need for valorisation as a democratic mandate. Aiming at developing this approach, the second step of the research focuses on industrial heritage, investigating its specific features and values. A case study is provided in order to understand some crucial issues concerning industrial heritage management and value creation. Focusing on the City of Paper (Fabriano, Italy, the activities carried out by the Museum of Paper and Watermark and by the Institute of Paper History Gianfranco Fedrigoni (ISTOCARTA are analysed in-depth, highlighting the role of collaboration among the different actors involved in industrial heritage management in order to promote sustainable local development.

  11. Issues and trends in radioactive waste management in Turkey

    International Nuclear Information System (INIS)

    Osmanlioglu, A.E.

    2002-01-01

    This paper focuses on issues associated with the waste management aspects of Turkey. Predisposal management of radioactive wastes covers a broad range of activities. This also includes waste identification, characterization and conditioning. Experience gained over years shows that current predisposal waste management practices are well advanced. The paper concludes these activities based on experience gained by CWPSF (CNAEM Waste Processing and Storage Facility) and includes issues and trends in radioactive waste management. In addition general information is presented on ongoing national projects and IAEA research projects on various issues of waste management. (author)

  12. Using Online Databases in Corporate Issues Management.

    Science.gov (United States)

    Thomsen, Steven R.

    1995-01-01

    Finds that corporate public relations practitioners felt they were able, using online database and information services, to intercept issues earlier in the "issue cycle" and thus enable their organizations to develop more "proactionary" or "catalytic" issues management repose strategies. (SR)

  13. Radioactive wastes. Their industrial management

    International Nuclear Information System (INIS)

    Lavie, J.M.

    1982-01-01

    This paper introduces a series that will review the present situation in the field of long-term management of radioactive wastes. Both the meaning and the purposes of an industrial management of radioactive wastes are specified. This short introduction is complemented by outline of data on the French problem [fr

  14. Information Systems Management: an Australasian view of key issues - 1996

    Directory of Open Access Journals (Sweden)

    Graham Pervan

    1997-11-01

    Full Text Available As part of a longitudinal study of key information systems management issues, a survey of Australasia's largest 500 organisations was conducted to identify which issues were perceived by the IS executives as being important, problematic and critical over the next three to five years. The most critical issues were revealed to be a mix of technology management issues (IT infrastructure, communications, disaster recovery, strategic management issues (competitive advantage, IS planning, aligning the IS organisation, people management issues (organisational learning, educating senior management in IT, systems development and data management issues (effective use of the data resource, and end-user computing. This reflects the need for a balance of business, technical, and people skills in an IS executive. Non-critical issues were mostly related to systems development and the individual technologies which must be integrated and managed to ensure a responsive IT infrastructure. The study also reveals that some issues are much more important than problematic (disaster recovery, competitive advantage, information architecture, and IS alignment while others are much more problematic than important (end-user computing, IS role and contribution, and BPR. The former reflects a growing level of knowledge in handling these issues, while the latter reflects a continuing problem with them. The differences between this study and similar studies conducted in 1988 and 1992 show that there is a growing confidence in the IS executive's ability to manage the strategic issues, a continuing concern about providing a responsive IT infrastructure (especially communications, and a continuing concern with educating all 'customers' in the organisation in the effective use of IT, including senior management.

  15. A Study on introduction of Bench Marking in the power industry - concentrated on the Bench Marking issue in the power industry

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Hyuck Soo [Korea Energy Economics Institute, Euiwang (Korea)

    1998-08-01

    Recently it takes too much pains for enterprises to be adapted to the more complicated social structure. There are no guarantees to survive in competition only with improving service quality of a product, reducing cost by improving production efficiency, and reducing labors. To survive in a keen competition, it is important to acquire new management techniques and management theories. Among them, a benchmarking technique, improving competitive power through the analysis of top-ranking companies or companies with excellent results in a comparative sector, is in the spotlight recently. Therefore, the approaches to bench marking were discussed with the focus on the adaptation of KEPCO with a new paradigm. However, this study contained the limit of applying benchmarking technique due to its huge scale. Therefore, it was focused on brining up benchmarking issue by reflecting the basic problems of power industry to the developed countries. (author). 29 refs., 16 figs., 41 tabs.

  16. An essay on: management of industrial waste, an engineer's viewpoint

    International Nuclear Information System (INIS)

    Raphael, M.A.

    1995-01-01

    Industrial waste and industrial waste management are described, with economic considerations and recommendations for an industrial waste management program applicable in Lebanon. Different conceptual systems for industrial waste management are presented: - The O effluent industrial plant, an electric manufacturing plant with mass and energy balance. - The industrial complexing concept where environmentally balanced and compatible, industries are located in one area. Waste effluents from one plant can be used as raw material for another plant. - A standard petroleum waste recovery plant to cope with local requirements complementary to the proposed sanitary waste treatment plant in Lebanon. Major sources of industrial waste in Lebanon are analyzed:local process industries, hospitals, laboratories, petroleum industries and power generation, are the major sources cited. For each source the level of treatment is indicated. Tables and appendixes on waste treatment and management along with the ISO 9000 series are presented. 10 refs. 3 figs

  17. Human Resources Practitioners’ Perceptions Of Their Role And Responsibility In Managing HIV/Aids In Industry

    Directory of Open Access Journals (Sweden)

    C. DE W. van Wyk

    2006-11-01

    Full Text Available The central question to be examined revolved around an analysis of the perceptions of Human Resources Practitioners regarding their role and responsibility in the management of HIV/AIDS in industry. A convenience sample of HR Practitioners was used in a cross-sectional design. A questionnaire measuring the constructs of managing HIV/AIDS in industry, as well as a biographical questionnaire was administered. The questionnaire proved to be reliable. A Cronbach alpha coefficient of 0,82 and 0,71 was obtained. Descriptive statistics were used to analyse the data. Results indicated that HR Practitioners experienced and perceived significant differences with regard to the implementation of their companies’ policy formation and -implementation, training needs of managers and employees, mentoring/ coaching -approaches and other AIDS-related issues in terms of their perceptions regarding the management of HIV/AIDS. The findings revealed a gap of knowledge on managing HIV/AIDS existing among HR Practitioners at all levels. While some HR Practitioners had a detailed knowledge of the disease and its prevention, others were ignorant about it, but agreed that the management of HIV/AIDS can be seen as an integral part of their daily role and responsibility in industry. Recommendations were proposed for future research, policy making and practice in the area of HIV/AIDS and the management thereof.

  18. The relationship between top managers' environmental attitudes and environmental management in hotel companies

    OpenAIRE

    Park, Jeongdoo

    2009-01-01

    Environmental management and sustainability have been recent important issues in the hospitality industry. The hotel industry, as a main sector of the hospitality industry, has benefited from environmental initiatives through improving corporate image and increasing resource and energy efficiency. Among various environmental issues that have been addressed in the hotel industry, managerial influence on environmental management is rarely investigated. The purpose of this study was to ex...

  19. Issues of Safety and Security: New Challenging to Malaysia Tourism Industry

    OpenAIRE

    Mohd Ayob Norizawati; Masron Tarmiji

    2014-01-01

    The safety and security issues nowadays become one of the forces causing changes in tourism industry in era of millennium. The main concern of this issues more focus on crime rates, terrorism, food safety, health issues and natural disaster. This topic gained the popularity in tourism research after 9/11 tragedy and since then the academicians and practitioners started seeking the best solution in ways to mitigate these negative impacts. For Malaysia, the image as safety and secure destinatio...

  20. Clearing and vegetation management issues

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    Clearing and continued management of incompatible plant species is critical to maintaining safe and reliable transmission and distribution lines at British Columbia Hydro. As part of a general review of policies regarding rights-of-way, the clearing of BC Hydro rights-of-way was studied by a task team in order to formulate a set of recommended policies and procedures to guide employees in all rights-of-way decisions, and to provide clear direction for resolution of all rights-of-way issues in a cost-effective manner. Issues reviewed were: clearing standards and line security standardization for transmission circuits; clearing rights for removal of trees or management of vegetation beyond the statutory right-of-way; clearing and vegetation management procedures; tree replacement; arboricultural techniques; periodic reviewing of clearing practices; compensation for tree removal; herbicide use; and heritage and wildlife trees. Justification for the recommendation is provided along with alternate options and costs of compliance

  1. Fashion Industry Supply Chain Issues: Zara (Azel France

    Directory of Open Access Journals (Sweden)

    Muhammed Kürşad Özlen

    2013-01-01

    Full Text Available The main purpose of retail business is to continuously maintain the responsiveness to the changing trends in consumer fashion tastes through quickly creating new designs that are suitable for all customers with an affordable price. Hence, the importance of Supply Chain (Management has appeared. The objectives of this study are to analyze the impact of purchasing and supply chain management strategies in retail industry and identify the way of success of AZEL FRANCE Retailer Company of ZARA clothing in Bosnia and Herzegovina from supply chain perspective management by conducting a survey study. AZEL FRANCE is found to be successful in that it can control and streamline the highly consumable fashion items in their supply chains so that they can greatly decrease their lead time and thus increase be responsive enough for fast changes in fashion customer needs and desires by minimizing the industry risks. The retailer stores of AZEL FRANCE are also found to be confident about the future profitability. However, some technical inabilities of the company are also identified. It can be suggested that AZEL FRANCE can easily leverage more its successfully implemented supply chain activities by increasing its technical abilities.

  2. UK-Nuclear decommissioning authority and US Salt-stone waste management issues

    International Nuclear Information System (INIS)

    Lawless, William; Whitton, John

    2007-01-01

    Available in abstract form only. Full text of publication follows: We update two case studies of stakeholder issues in the UK and US. Earlier versions were reported at Waste Management 2006 and 2007 and at ICEM 2005. UK: The UK nuclear industry has begun to consult stakeholders more widely in recent years. Historically, methods of engagement within the industry have varied, however, recent discussions have generally been carried out with the explicit understanding that engagement with stakeholders will be 'dialogue based' and will 'inform' the final decision made by the decision maker. Engagement is currently being carried out at several levels within the industry; at the national level (via the Nuclear Decommissioning Authority's (NDA) National Stakeholder Group (NSG)); at a local site level (via Site Stakeholder Groups) and at a project level (usually via the Best Practicable Environmental Option process (BPEO)). This paper updates earlier results by the co-author with findings from a second questionnaire issued to the NSG in Phase 2 of the engagement process. An assessment is made regarding the development of stakeholder perceptions since Phase 1 towards the NDA process. US: The US case study reviews the resolution of issues on salt-stone by Department of Energy's (DOE) Savannah River Site (SRS) Citizens Advisory Board (CAB), in Aiken, SC. Recently, SRS-CAB encouraged DOE and South Carolina's regulatory Department of Health and Environmental Control (SC-DHEC) to resolve a conflict preventing SC-DHEC from releasing a draft permit to allow SRS to restart salt-stone operations. It arose with a letter sent from DOE blaming the Governor of South Carolina for delay in restarting salt processing. In reply, the Governor blamed DOE for failing to assure that Salt Waste Processing Facility (SWPF) would be built. SWPF is designed to remove most of the radioactivity from HLW prior to vitrification, the remaining fraction destined for salt-stone. (authors)

  3. About the new industrial production management concept as the company strategy in the fourth industrial revolution

    Directory of Open Access Journals (Sweden)

    Kovalchuk Julia

    2017-01-01

    Full Text Available The new industrial production management requires a review of the third industrial revolution results and accounting for mass adoption of information and communication technologies to create the organizational basis of the fourth industrial revolution. The future changes will affect all components of the organization and management components of industrial enterprises, forming the potential of new competitive advantages in a global economy. The research included the identification of key factors of formation, development and destruction (absorption related branches of knowledge the industrial production management as the theory and practical activities, given the critical approach to its nature and processes. Revealed common signs of the industrial production management need as a field of knowledge in the framework of previous and current industrial revolutions. It is shown that the industrial production management effectively solves the problem of subsistence economy, and substantiates that the modern digital economy also has the characteristics of subsistence economy. It is important the necessity of formulation of a new organizational thinking, the implementation of which is possible in the modern interpretation of the project office. The article represents the theoretical basis for developing practical recommendations for the formation of the new concept of industrial production management to take advantage of the impact of engineering component on the economic results and the creation of project offices for the development of traditional and created markets in the organization of a new production mode (based on the digital economy.

  4. Design Management in the Textile Industry - A Network Perspective

    DEFF Research Database (Denmark)

    Christensen, Poul Rind; Bang, Anne Louise

    In this paper we explore textile design activities and textile design management from an industrial network perspective. The textile industry is probably one of the most globalized manufacturing industries in the world and thus one of the most dispersed industries on the globe. Most studies on de...... management in order to maintain the relationships in their network of customers and suppliers....

  5. Risk management of knowledge loss in nuclear industry organizations (Russian edition)

    International Nuclear Information System (INIS)

    2012-08-01

    Maintaining nuclear competencies in the nuclear industry and nuclear regulatory authorities will be one of the most critical challenges in the near future. As many nuclear experts around the world are retiring, they are taking with them a substantial amount of knowledge and corporate memory. The loss of such employees who hold knowledge critical to either operations or safety poses a clear internal threat to the safe and reliable operation of nuclear facilities. This publication is intended for senior and middle level managers of nuclear industry operating organizations and provides practical information on knowledge loss risk management. The information provided in this it is based upon the actual experiences of Member State operating organizations and is intended to increase awareness of the need to: develop a strategic approach and action plans to address the potential loss of critical knowledge and skills; provide processes and in conducting risk assessments to determine the potential for loss of critical knowledge caused by the loss of experienced workers; and enable nuclear organizations to utilize this knowledge to improve the skill and competence of new and existing workers In 2004, the IAEA published a report entitled The Nuclear Power Industry's Ageing Workforce: Transfer of Knowledge to the Next Generation (IAEA-TECDOC-1399). That report highlighted some of the knowledge management issues in Member States resulting from the large number of retiring nuclear power plant personnel who had been involved with the commissioning and initial operation of nuclear power plants. This publication complements that report by providing a practical methodology on knowledge loss risk management as one element of an overall strategic approach to workforce management which includes work force planning, recruitment, training, leadership development and knowledge retention

  6. Scope of current abandonment issues in the oil and gas industry

    International Nuclear Information System (INIS)

    Scott, I.F.H.

    1997-01-01

    Abandonment issues in the oil and gas industry, such as well sites, batteries, gas plants, compressor stations, and pipelines, were discussed. Responsibilities of the Canadian Association of Petroleum Producers (CAPP) for informing the Canadian public about energy and environmental issues on behalf of the upstream petroleum industry were reviewed. Industry regulators and those who have jurisdiction over the abandonment of facilities were identified. In Alberta, the main agencies are the Alberta Energy and Utilities Board, Alberta Environmental Protection, and Alberta Food and Rural Development in addition to the National Energy Board and Indian Oil and Gas Canada. At the end of 1995, 160,000 wells had been drilled in Alberta of which 60,000 are still active, 35,000 are suspended and 70,000 wells have been abandoned. The industry-financed Orphan Well Program was established to provide funds for facility abandonment, decontamination and surface reclamation costs associated with orphaned facilities. CAPP agrees that operators of oil and gas facilities must be held responsible and accountable for the abandonment of their facilities. CAPP is looking for support from government to ensure that enforcement actions limit the number of orphan facilities. tabs., figs

  7. Information technology: management issues in outsource contracts.

    OpenAIRE

    2008-01-01

    This study concerns the investigation of management issues within information technology outsourcing contracts. The information technology outsourcing life cycle is used as the flow structure for the investigation. The associated user expectations that occur in each of the phases of the information technology outsourcing life cycle are identified. Following the identification of the management and user expectation issues in each phase of the outsource life cycle, the “Coetzee solution framewo...

  8. Labour Rights Protection in Industrial Relations Issues

    Directory of Open Access Journals (Sweden)

    Eko Adi Susanto

    2015-12-01

    Full Text Available Many violations of the terms of employment at Surabaya, employment protection  and working conditions for workers who are not provided by employers to the maximum, according to the legislation in force, while the legal protection for workers constrained because of the weakness in the system of employment law, both the substance and the culture built by governments and companies. How To Cite: Susanto, E. (2015. Labour Rights Protection in Industrial Relations Issues. Rechtsidee, 2(2, 109-120. doi:http://dx.doi.org/10.21070/jihr.v2i2.78

  9. Data management issues in mobile ad hoc networks.

    Science.gov (United States)

    Hara, Takahiro

    2017-01-01

    Research on mobile ad hoc networks (MANETs) has become a hot research topic since the middle 1990's. Over the first decade, most research focused on networking techniques, ignoring data management issues. We, however, realized early the importance of data management in MANETs, and have been conducting studies in this area for 15 years. In this review, we summarize some key technical issues related to data management in MANETs, and the studies we have done in addressing these issues, which include placement of data replicas, update management, and query processing with security management. The techniques proposed in our studies have been designed with deep considerations of MANET features including network partitioning, node participation/disappearance, limited network bandwidth, and energy efficiency. Our studies published in early 2000's have developed a new research field as data management in MANETs. Also, our recent studies are expected to be significant guidelines of new research directions. We conclude the review by discussing some future directions for research.

  10. Operations management in automotive industries from industrial strategies to production resources management, through the industrialization process and supply chain to pursue value creation

    CERN Document Server

    Gobetto, Marco

    2014-01-01

    This book has proved its worth over the years as a text for courses in Production Management at the Faculty of Automotive Engineering in Turin, Italy, but deserves a wider audience as it presents a compendium of basics on Industrial Management, since it covers all major topics required. It treats all subjects from product development and “make or buy”-decision strategies to the manufacturing systems setting and management through analysis of the main resources needed in production and finally exploring the supply chain management and the procurement techniques. The very last chapter recapitulates the previous ones by analysing key management indicators to pursue the value creation that is the real purpose of every industrial enterprise. As an appendix, a specific chapter is dedicated to the basics of production management where all main relevant definitions, techniques and criteria are treated, including some numerical examples, in order to provide an adequate foundation for understanding the other chapte...

  11. Progress on management business system of LLW generated from research and industrial nuclear facilities

    International Nuclear Information System (INIS)

    Izumida, Tatsuo

    2014-01-01

    RANDEC has been studying a management business system of LLW (Low Level Waste) generated from research and industrial facilities since 2008. To examine economical problems, the income and expenditure of LLW treatment business was simulated. As a result, raising method of the funds which is required in preparatory stage of LLW treatment business is an obvious issue to carry out as public utility works. (author)

  12. The Middle Eastern Wealth Management Industry: Boon or Bust?

    OpenAIRE

    Michael, Bryane; Apostoloski, Nenad

    2014-01-01

    The wealth management industry in the Middle East and North Africa (MENA) represents a roughly $800 billion opportunity. Yet, tapping this opportunity will require new strategies by the wirehouses looking to penetrate into this market. In this paper, we argue that Middle-Eastern policymakers and bankers will need to develop an indigenous wealth management industry which keeps the super-wealthy’s investments at home. Developing a local national wealth management industry requires letting in fo...

  13. Environmental issues and the nuclear industry

    International Nuclear Information System (INIS)

    Castle, P.

    1995-01-01

    Health safety and environmental liabilities of the 'nuclear industry' reflect those of industry in general and may broadly be divided into two areas: criminal liability for regulatory non-compliance; and civil liability for damage caused to persons and their property (for example, neighbours, employees etc). In addition, environmental liability may be incurred as a result of powers of the regulatory authorities to clean up contamination and to recoup the cost. These are in addition to the regime of strict liability imposed, where relevant, by the Nuclear Installations Act 1965. In the case of environmental liabilities, 'owners;, 'occupiers', 'persons responsible', 'persons in control' may all be held to be liable and for the most part these terms remain undefined both under English law and European Community (now European Union) law. This potentially has ramifications for current and former owners and operators, their boards and senior managers, other employees, parent companies, shareholders and their lenders and investors - of particular relevance in the context of privatization. (author)

  14. Public policy issues in nuclear waste management

    International Nuclear Information System (INIS)

    Nealey, S.M.; Radford, L.M.

    1978-10-01

    This document aims to raise issues and to analyze them, not resolve them. The issues were: temporal equity, geographic and socioeconomic equity, implementation of a nuclear waste management system, and public involvement

  15. Ultrasonic nondestructive evaluation systems industrial application issues

    CERN Document Server

    Callegari, Sergio; Montisci, Augusto; Ricci, Marco; Versaci, Mario

    2015-01-01

    This book covers the practical implementation of ultrasonic NDT techniques in an industrial environment, discussing several issues that may emerge and proposing strategies for addressing them successfully.  It aims to bridge advanced academic research results and their application to industrial procedures. The topics covered in the text range from the basic operation of an ultrasonic NDT system to the simulation of the measurement operations; from the choice and generation of the signals energizing the system to the different ways of exploiting the probes and their output signals; and from quality assessment evaluation to the use of soft computing techniques for classification. Throughout the text, an effort is made to embrace a system view where the physical and technological aspects of sensing are addressed together with higher abstraction levels, such as signal and information processing. Consequently, the book aims at guiding the reader through the various tasks requested for developing a complete ultras...

  16. Integrating Energy and Environmental Management in Wood Furniture Industry

    Science.gov (United States)

    Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review. PMID:24587734

  17. Integrating energy and environmental management in wood furniture industry.

    Science.gov (United States)

    Gordić, Dušan; Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review.

  18. Enhancing an Integrative Course in Industrial Engineering and Management via Realistic Socio-technical Problems and Serious Game Development

    NARCIS (Netherlands)

    Szirbik, Nicolae; Pelletier, Christine; Velthuizen, Vincent; Umeda, Shigeki

    2015-01-01

    This paper discusses specific educational issues encountered during the Systems Engineering Design course at the Industrial Engineering and Management master program at the University of Groningen. It explains first the concept of an integrative course, an innovation that was applied first in this

  19. Developing and Managing University-Industry Research Collaborations through a Process Methodology/Industrial Sector Approach

    Science.gov (United States)

    Philbin, Simon P.

    2010-01-01

    A management framework has been successfully utilized at Imperial College London in the United Kingdom to improve the process for developing and managing university-industry research collaborations. The framework has been part of a systematic approach to increase the level of research contracts from industrial sources, to strengthen the…

  20. International Asia Conference on Industrial Engineering and Management Innovation

    CERN Document Server

    Shen, Jiang; Dou, Runliang

    2013-01-01

    The International Conference on Industrial Engineering and Engineering Management is sponsored by the Chinese Industrial Engineering Institution, CMES, which is the only national-level academic society for Industrial Engineering. The conference is held annually as the major event in this arena. Being the largest and the most authoritative international academic conference held in China, it provides an academic platform for experts and entrepreneurs in the areas of international industrial engineering and management to exchange their research findings. Many experts in various fields from China and around the world gather together at the conference to review, exchange, summarize and promote their achievements in the fields of industrial engineering and engineering management. For example, some experts pay special attention to the current state of the application of related techniques in China as well as their future prospects, such as green product design, quality control and management, supply chain and logist...

  1. After-sales service of engineering industrial assets a reference framework for warranty management

    CERN Document Server

    González-Prida Díaz, Vicente

    2014-01-01

    This book explores the practical implementation of an advanced after-sales management framework devoted to warranty management. The framework is intended for companies producing either standardized or customized products, and such a management tool will facilitate organizational improvement and support innovative decision making processes for technical assistance in after-sales services.  “After–sales Service of Engineering Industrial Assets” comprises a proposal for a warranty management framework, with an account of the different methods that can be used to improve decision making in the different stages of the after-sales service management process, and strategies for strengthening the structure and foundations of the framework. A review of the fundamental issues and current research topics in warranty management and after sales services is also provided, which is exemplified by a case study. This book is intended for postgraduates, researchers and engineers who are interested in aftersales manageme...

  2. Performance issues for a changing electric power industry

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    Extremely cold weather created record demands for electricity in the eastern two-thirds of the United States during the week of January 16, 1994. Fuel-related problems, mostly the result of transportation constraints resulting from ice accumulation on roads and water-ways, and unexpected generating capacity outages at utilities and nonutilities resulted in demand not being met. Some utilities asked nonessential customers along with State governments and a portion of the Federal Government to shut down. Two electric control areas, the Pennsylvania-New Jersey-Maryland Interconnection (PJM) and Virginia Electric & Power Company (VEPCO), instituted rolling blackouts. This disturbance was reported widely in the press and, along with other disturbances, peaked renewed interest in the reliability of the electric power system. The renewed interest in reliability has coincided with substantial changes that are beginning to occur in the structure and competitiveness of the electric power industry. Juxtaposing the question of reliability and the issue of changing industry structure leads to the central concern of this report: What effect, if any, will the changing structure of the industry have on the reliability of the system?

  3. 96 Globalization and Management: Issues and Concepts

    African Journals Online (AJOL)

    User

    2010-10-17

    Oct 17, 2010 ... Oseyomon, Ehi Patrick - Department of Business, Admiistration, Faculty of. Management ... attention of scholars apart from economic issues such as trade, labour practices, the ..... Moral Issues in Business. 6th Edition. In C.

  4. Analysis of the State of Operation Management at Industrial Enterprises

    OpenAIRE

    Zakharov Vladimir A.; Ivanova Valentina I.

    2013-01-01

    The article analyses operation management at industrial enterprises of the Kharkiv region, identifies main problems and offers ways of improvement of the quality of operation management at industrial enterprises of Ukraine. It marks out the factors of the competitive environment of the operation system, which exert significant influence on operation management of an industrial enterprise. It builds a diagram of problems and a tree of goals of elimination of problems of operation management.Пр...

  5. Long term industrial management of radioactive wastes in France

    International Nuclear Information System (INIS)

    Lavie, J.

    1981-01-01

    All human activities including energy generation entail the wastes. This definitely applies also to nuclear power generation. Currently the nuclear power program is very extensive, and the plans of fuel reprocessing proceed along this line. In consequence, the Government has decided on tackling the problem of industrial radioactive waste management in earnest. For the purpose, the National Radioactive Waste Management Agency (ANDRA) was created in November, 1979, within the French Atomic Energy Commission (CEA). Its main functions are the design, siting and construction of waste disposal centers and their management, the establishment of waste treatment and disposal standards, and the research and development. The following matters are described: the need for comprehensive industrial approach, the concept of industrial management, ANDRA business program, the industrial policy on waste disposal, and ANDRA financing. (J.P.N.)

  6. Perceptions of job and industry characteristics on career decisions in the hospitality industry

    NARCIS (Netherlands)

    Blomme, R.J.; Tromp, D.M.; Rheede, van A.

    2009-01-01

    This paper reports on the initial results of a case study on management-level turnover in the hospitality industry and on factors influencing the career decisions of highly educated employees to stay or leave the industry. This issue is considered using an interpretative paradigm and the conclusion

  7. A User-Centered Mobile Cloud Computing Platform for Improving Knowledge Management in Small-to-Medium Enterprises in the Chilean Construction Industry

    Directory of Open Access Journals (Sweden)

    Daniela Núñez

    2018-03-01

    Full Text Available Knowledge management (KM is a key element for the development of small-to-medium enterprises (SMEs in the construction industry. This is particularly relevant in Chile, where this industry is composed almost entirely of SMEs. Although various KM system proposals can be found in the literature, they are not suitable for SMEs, due to usability problems, budget constraints, and time and connectivity issues. Mobile Cloud Computing (MCC systems offer several advantages to construction SMEs, but they have not yet been exploited to address KM needs. Therefore, this research is aimed at the development of a MCC-based KM platform to manage lessons learned in different construction projects of SMEs, through an iterative and user-centered methodology. Usability and quality evaluations of the proposed platform show that MCC is a feasible and attractive option to address the KM issues in SMEs of the Chilean construction industry, since it is possible to consider both technical and usability requirements.

  8. Digging deeper: crisis management in the coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.M.; Horsley, J.S. [Elon University, Elon, NC (United States)

    2009-07-01

    This study explores crisis management/communication practices within the coal industry through the lens of high reliability organization (HRO) concepts and sensemaking theory. In-depth interviews with industry executives and an analysis of an emergency procedures manual were used to provide an exploratory examination of the status of crisis management within this industry, a context in which crisis management/communication may be viewed as an opportunity to improve existing negative perceptions or generate more favorable attitudes among stakeholders. Findings suggest that although companies place great emphasis on the technical response to a crisis, the lack of crisis communication components in overall planning strategies prevents some companies from being able to adequately respond to a crisis situation.

  9. Official report to the government 2000:13. Electronic trading and business management in the oil- and gas industry. Consequences and possibilities for the Norwegian oil- and gas industry

    International Nuclear Information System (INIS)

    2001-01-01

    This report includes (1) a discussion of the development of electronic trading in general, (2) the development of electronic trading in the oil- and gas industry and (3) the role of the authorities in electronic trading and business management. It is realized that electronic trading and business management will quickly and profoundly change the trading among companies. The petroleum industry is expected to be among the leading industries in using electronic trading and many of the work processes that now characterize this sector will soon change. A number of public measures are already in effect to facilitate the use of electronic trading and the use of the Internet. Special attention has been given to legal issues and security aspects in trading over the Internet. No special need is seen for public measures with regard to standardization

  10. Management functions, issues, and configuration alternatives: TO support a transportation management configuration study: [Final report

    International Nuclear Information System (INIS)

    1987-01-01

    The Office of Civilian Radioactive Waste Management (OCRWM) of the Department of Energy (DOE) is responsible for the safe transporation and disposal of spent nuclear fuel from utility-owned nuclear power generation reactors and high-level radioactive waste from both defense and civilian generators to long-term storage repositories. Given the volume, duration, and sensitivity of the operation, DOE is seeking not only the safest and best transportation system but also the most effective and resource-efficient management concept. Within the general guidelines of the Nuclear Waste Policy Act (NWPA) of 1982 calling for the fullest possible use of private industry contracts, this study examines the technical and administrative functions as well as the key issues to be addressed in the formation of a management structure. In order to stand alone as a comprehensive treatment of the total requirement, the material contained in many seperate and sometimes divergent DOE/OCRWM documents was evaluated and is compiled here. An attempt was made to succinctly define the nature of the problem, the objectives and scope of both the operating and management systems, and then to dissect the functions required in order to meet the objectives and operating functions are listed and described

  11. Business, industrial marketing and uncertainty [Editorial

    OpenAIRE

    Merigó Lindahl, José M.; Gil Lafuente, Anna Maria; Gil Lafuente, Jaime

    2016-01-01

    This special issue of the Journal of Business & Industrial Marketing, entitled "Business, Industrial Marketing and Uncertainty", presents selected extended studies that were presented at the European Academy of Management and Business Economics Conference (AEDEM 2012).

  12. Contentious issues in research on trafficked women working in the sex industry: study design, ethics, and methodology.

    Science.gov (United States)

    Cwikel, Julie; Hoban, Elizabeth

    2005-11-01

    The trafficking of women and children for work in the globalized sex industry is a global social problem. Quality data is needed to provide a basis for legislation, policy, and programs, but first, numerous research design, ethical, and methodological problems must be addressed. Research design issues in studying women trafficked for sex work (WTSW) include how to (a) develop coalitions to fund and support research, (b) maintain a critical stance on prostitution, and therefore WTSW (c) use multiple paradigms and methods to accurately reflect WTSW's reality, (d) present the purpose of the study, and (e) protect respondents' identities. Ethical issues include (a) complications with informed consent procedures, (b) problematic access to WTSW (c) loss of WTSW to follow-up, (d) inability to intervene in illegal acts or human rights violations, and (e) the need to maintain trustworthiness as researchers. Methodological issues include (a) constructing representative samples, (b) managing media interest, and (c) handling incriminating materials about law enforcement and immigration.

  13. Effective executive management in the pharmaceutical industry.

    Science.gov (United States)

    Tran, Hoang; Kleiner, Brian H

    2005-01-01

    Along with the boom in information technology and vast development in genomic and proteomic discoveries, the pharmaceutical and biotech industries have been provided the means and tools to create a new page in medicinal history. They are now able to alter the classic ways to cure complex diseases thanks to the completion of the human genome project. To be able to compete in this industry, pharmaceutical management has to be effective not only internally but also externally in socially acceptable conduct. The first department that requires focus is marketing and sales. As the main driving force to increase revenues and profits, marketing and sales employees should be highly motivated by compensation. Also, customer relationships should be maintained for long-term gain. As important as marketing, research and development requires the financial support as well as the critical decision making to further expand the product pipeline. Similarly, finance and technologies should be adequately monitored and invested to provide support as well as prepare for future expansion. On top of that, manufacturing processes and operations are operated per quality systems and FDA guidelines to ensure high quality. Human Resources, on the other hand, should carry the managing and motivation from upper management through systematic recruitment, adequate training, and fair compensation. Moreover, effective management in a pharmaceutical would also require the social welfare and charity to help patients who cannot afford the treatment as well as improving the organization's image. Last but not least, the management should also prepare for the globalization of the industry. Inevitably, large pharmaceutical companies are merging with each other or acquiring smaller companies to enhance the competitive advantages as well as expand their product mix. For effectiveness in a pharmaceutical industry, management should focus more than just the daily routine tasks and short-term goals. Rather, they

  14. Risk Management for New Product Development Projects in Food Industry

    Directory of Open Access Journals (Sweden)

    Porananond, D.

    2014-07-01

    Full Text Available Project risk management provides a guideline for decision making in new product development (NPD projects, reducing uncertainty and increasing success rate. However, the acceptance of formal risk management applications in industry, especially for NPD projects is still in question. A study of a food conglomerate in Thailand found that only 9% of NPD projects used a systematic approach for managing risk. 61% of the projects realised the importance of risk management, while the remaining 30% did not involve risk management at all. This study aims to develop a risk management model for NPD projects in the food industry. The first section of this paper reviews the literature on risk management theory, including international standards for risk and project management (ISO31000 and ISO21500, publications for the Project Management Body of Knowledge (PMBOK, by a professional organisation the Project Management Institute (PMI, and also academic research. 182 academic papers, published between January 2002 and August 2012 were selected. The second part interviews conducted with eight NPD experts from five of the major food manufacturers in Thailand to examine their risk management practices and problems. Conclusions are made on five topics : classification of research method, project type and industrial segment, distribution of articles by region, tools & techniques for risk management and risk factors in projects. Specific requirements of risk management for NPD projects in the food industry are identified. A risk management model and the concept of risk management applications for the food industry are proposed.

  15. Strategic Issues in University Management

    NARCIS (Netherlands)

    Roosendaal, Hans E.

    2005-01-01

    In this paper we will discuss developments in the field of scientific information with the aim to determine and analyse some of the pertinent strategic issues related to higher education (HE) as seen from the stakeholder perspective of the university and its management.

  16. Infinite Queue Management via Cascade Control for Industrial Routers in Smart Grid IP Networks

    Directory of Open Access Journals (Sweden)

    Ku-Hwan Kim

    2016-01-01

    Full Text Available Smart grid applications experience an extremely wide range of communication delay. Data flows of those applications are normally aggregated at industrial network routers in substations, form infinite (long queues termed bufferbloat issue, and might damage the operation of transmission control protocol. The default queue management scheme, DropTail, in such routers just drops packets if queue is full while the others in literature are mostly based on one-loop feedback control where an optimal point of performance between queue length and drop rate is limited. In this paper, we study the problem of managing a long queue of industrial router at substation under heterogeneous smart grid networks. Specifically, we propose an enqueue-dequeue dropping cascade control using a two-loop design method to control both window size and queue length. Moreover, our proposal can be easily implemented into router firmware with provided discrete expressions. Finally, our simulation results are presented to validate the possible benefits that can be gained from cascade control and compare the existing queue management methods as well.

  17. Energy management in the Canadian airline industry

    Energy Technology Data Exchange (ETDEWEB)

    1982-09-01

    The purpose of this report was to outline the current status of the Canadian airline industry's energy performance and to outline energy management programs undertaken within the industry. The study also provides an aviation energy management information base developed through a comprehensive computer bibliographical review. A survey of the industry was undertaken, the results of which are incorporated in this report. The Canadian airline industry has recognized the importance of energy management and considerable measures have been introduced to become more energy efficient. The largest single contributor to improved productivity is the acquisition of energy efficient aircraft. Larger airlines in particular have implemented a number of conservation techniques to reduce fuel consumption. However, both large and small airlines would further benefit through incorporating techniques and programs described in the annotated bibliography in this study. Rising fuel prices and economic uncertainties will be contributing factors to a smaller average annual growth in fuel consumption during the 1980s. The lower consumption levels will also be a result of continuing energy conservation awareness, new technology improvements, and improvements in air traffic control. 98 refs., 4 figs., 6 tabs.

  18. Knowledge Management Issues in Academic Libraries in Imo State ...

    African Journals Online (AJOL)

    This paper explored the Knowledge Management (KM) issues in academic libraries. It discussed these issues - types of knowledge and knowledge management practices; the technologies and mechanisms of acquiring; creating; sharing, transferring etc knowledge in the present day knowledge era. It highlighted the ...

  19. Energy resource management for energy-intensive manufacturing industries

    Energy Technology Data Exchange (ETDEWEB)

    Brenner, C.W.; Levangie, J.

    1981-10-01

    A program to introduce energy resource management into an energy-intensive manufacturing industry is presented. The food industry (SIC No. 20) was chosen and 20 companies were selected for interviews, but thirteen were actually visited. The methodology for this program is detailed. Reasons for choosing the food industry are described. The substance of the information gained and the principal conclusions drawn from the interviews are given. Results of the model Energy Resource Management Plan applied to three companies are compiled at length. Strategies for dissemination of the information gained are described. (MCW)

  20. Occupational health issues in small-scale industries in Sri Lanka: An underreported burden.

    Science.gov (United States)

    Suraweera, Inoka K; Wijesinghe, Supun D; Senanayake, Sameera J; Herath, Hema D B; Jayalal, T B Ananda

    2016-10-17

    Work-related diseases and occupational accidents affect a significant number of workers globally. The majority of these diseases and accidents are reported from developing countries; and a large percentage of the workforce in developing countries is estimated to be employed in small-scale industries. Sri Lanka is no exception. These workers are exposed to occupational hazards and are at a great risk of developing work- related diseases and injuries. To identify occupational health issues faced by small-scale industry workers in Sri Lanka. A cross sectional study was conducted among workers in four selected small-scale industry categories in two districts of Sri Lanka. A small-scale industry was defined as a work setting with less than 20 workers. Cluster sampling using probability proportionate to size of workers was used. Eighty clusters with a cluster size of eight from each district were selected. Data was collected using a pre-tested interviewer administered questionnaire. Our study surveyed 198 industries. Headache (2.2%, 95% CI 1.5-3.1) and eye problems (2.1%, 95% CI 1.4-2.9) were the commonest general health issues detected. Back pain (4.8%, 95% CI 3.8-6.1) was the most prevalent work-related musculoskeletal pain reported. Knee pain was the second highest (4.4%, 95% CI 3.4-5.6). Most of the work-related musculoskeletal pain was either of short duration or long lasting. Work-related musculoskeletal pain was much more common than the general health issues reported. Health promotional programs at workplaces focusing ergonomics will benefit the workers at small-scale industries inSri Lanka.

  1. A Study on the Evaluation of Industrial Solid Waste Management ...

    African Journals Online (AJOL)

    Industrial solid waste is a serious health concern in Aba, South East Nigeria. This study was undertaken to assess the approaches of some industries toward some aspects of waste management in Aba. Interviews, observation and questionnaires administered to industry executives and waste managers were used to ...

  2. Infinite Queue Management via Cascade Control for Industrial Routers in Smart Grid IP Networks

    OpenAIRE

    Kim, Ku-Hwan; To, Hoang-Linh; Hwang, Won-Joo; Lee, Jung-Tae

    2016-01-01

    Smart grid applications experience an extremely wide range of communication delay. Data flows of those applications are normally aggregated at industrial network routers in substations, form infinite (long) queues termed bufferbloat issue, and might damage the operation of transmission control protocol. The default queue management scheme, DropTail, in such routers just drops packets if queue is full while the others in literature are mostly based on one-loop feedback control where an optimal...

  3. A primer on industrial ecosystems : a strategy for sustainable industrial development

    Energy Technology Data Exchange (ETDEWEB)

    Cote, R P [Dalhousie Univ., Halifax, NS (Canada). Eco-Efficiency Centre; [Dalhousie Univ., Halifax, NS (Canada). Faculty of Management, School for Resource and Environmental Studies

    2003-07-01

    Industrial ecology incorporates ecological theories, functions and limits into the design of industrial production systems, processes and products. The main objective is to enhance environmental and economic performance through collaboration in managing environmental resource issues such as energy, water and materials. Industrial ecology recognizes the connectedness and synergies of materials, products and infrastructure. As such, it considers the life cycle of products, the design of buildings, infrastructure and industrial parks. By working together, businesses gain a collective benefit which is greater than the total of the individual benefits each company could achieve on its own. Industrial ecology also considers the reuse, recovery and recycling of resources. The benefits include: efficiency of resource use; cost reduction for industrial infrastructure; sustainable development support; and, new opportunities in economic development, technology development, manufacturing, and business management. This primer also presents guidelines for win-win projects in industrial ecology. refs., figs.

  4. Managing industrial price risk: a balancing act

    International Nuclear Information System (INIS)

    Muse, J-F.

    2000-01-01

    The challenge of managing industrial price risk is assessed by a senior executive of Cargill, a diversified industrial conglomerate, involved in steel manufacturing and recycling, oilseeds, cocoa, beef, pork, and poultry processing, fertilizer and fruit juice production, in addition to trading and financial risk management. Energy is a key component in many of Cargill's businesses, hence the company has good reason to be concerned about price volatility. The effects of energy risk management on the company's shareholders are demonstrated by an analysis of month-to-month price fluctuations over the Nov 1999 to Oct 2000 period, showing the monthly value of risk at the 95 per cent confidence level as $4,832,195. The effects of alternatives for an end-user such as passing on cost to customers, improving energy efficiency. fuel switching and production curtailment, are explored and limitations and problems with each of the approaches are discussed. The best options for industrial end-users of natural gas are suggested to be a proactive risk management program in the short-term and asset diversification, fuel switching, and geographic relocation of production facilities in the long-term

  5. 23rd International Conference on Industrial Engineering and Engineering Management 2016

    CERN Document Server

    Shen, Jiang; Dou, Runliang

    2017-01-01

    International Conference on Industrial Engineering and Engineering Management is sponsored by Chinese Industrial Engineering Institution, CMES, which is the unique national-level academic society of Industrial Engineering. The conference is held annually as the major event in this area. Being the largest and the most authoritative international academic conference held in China, it supplies an academic platform for the experts and the entrepreneurs in International Industrial Engineering and Management area to exchange their research results. Many experts in various fields from China and foreign countries gather together in the conference to review, exchange, summarize and promote their achievements in Industrial Engineering and Engineering Management fields. Some experts pay special attention to the current situation of the related techniques application in China as well as their future prospect, such as Industry 4.0, Green Product Design, Quality Control and Management, Supply Chain and logistics Management...

  6. Radioactive waste management in the VS military nuclear industry

    International Nuclear Information System (INIS)

    Kobal'chuk, O.V.; Kruglov, A.K.; Sokolova, I.D.; Smirnov, Yu.V.

    1989-01-01

    Organization and plans of radioactive waste management in the US military nuclear industry, determining transition from the policy of temporal waste storage to their final and safe disposal are presented. Programs of long-term management of high-level, transuranium and low-level wastes, the problems of the work financing and the structure of management activities related to the radioactive waste processing military nuclear industry enterprises are considered

  7. Management issues regarding the contingent workforce

    Energy Technology Data Exchange (ETDEWEB)

    Bowen-Smed, S. [Bowen Workforce Solutions, Calgary, AB (Canada)

    2004-07-01

    Fifty per cent of corporate leaders in Calgary today will be eligible for retirement over the next 5 years. In addition, 53 per cent of the entire Calgary workforce is 45 years or older. This paper suggests that only companies that seek aggressive programs to engage immigrants and contractors will weather the skills shortages anticipated in the future. It was noted that contractors care about aligning values to organizations, regardless of the project length, and that professional development is a key consideration when it comes to selecting their next project. Contingent workforce issues include: effectiveness; classification; risk; and cost. It was stated that effectiveness of the contingent workforce is an employer's responsibility. Factors that would strengthen the relationship between corporations and contractors include: proper orientation to manage expectations; training to improve productivity; tracking to enhance the quality of the workforce; and a management process to ensure adherence to protocol. It was concluded that the contingent workforce is an essential component to human capital management strategy, but that key issues must be managed to avoid unnecessary costs. In addition, effectiveness improves when processes are implemented. It was also suggested that technology is an essential component of the solution. Outsourcing is an effective approach to managing the contingent workforce. tabs., figs.

  8. Practice management: observations, issues, and empirical evidence.

    Science.gov (United States)

    Wong, H M; Braithwaite, J

    2001-02-01

    The primary objective of this study is to provide objective, empirical, evidence-based practice management information. This is a hitherto under-researched area of considerable interest for both the practitioner and educator. A questionnaire eliciting a mix of structured and free text responses was administered to a random sample of 480 practitioners who are members of the American Academy of Periodontology. Potential respondents not in private practice were excluded and the next listed person substituted. The results provide demographic and descriptive information about some of the main issues and problems facing practice managers, central to which are information technology (IT), financial, people management, and marketing. Human resource and marketing management appear to represent the biggest challenges. Periodontists running practices would prefer more information, development, and support in dealing with IT, finance, marketing, and people management. The empirical evidence reported here suggests that although tailored educational programs on key management issues at both undergraduate and postgraduate levels have become ubiquitous, nevertheless some respondents seek further training opportunities. Evidence-based practice management information will be invaluable to the clinician considering strategic and marketing planning, and also for those responsible for the design and conduct of predoctoral and postdoctoral programs.

  9. Industrial demand-side management in Canada. In the market for competition

    International Nuclear Information System (INIS)

    Fleming, A.

    1995-01-01

    The requirement for demand-side management brought on by increased competitiveness, a consequence of the deregulation of Canadian electric utilities, was discussed. Options for demand-side management were presented. The effect of deregulation on making demand-side management and energy efficiency high priorities in industry was discussed. Coordinated efforts of Power Smart Inc. and utilities in promoting energy efficiency were claimed to be the key to the success of demand-side management in the electric power industry in Canada. Demand-side management programs were expected to enhance productivity of industry by maximizing the value of plant energy use, and by providing industrial customers with a higher level of customer service

  10. Environmental issues and waste management in energy and minerals production

    International Nuclear Information System (INIS)

    Yegulalp, T.M.; Kim, K.

    1992-01-01

    This book includes the following topics: water management in the minerals industry; management of radioactive wastes in the energy industry; the US high-level radioactive waste program; acid mine drainage; health risks from uranium mill tailings; alternate energy sources, such as hydrogen; superconductive magnetic energy storage; nuclear waste

  11. Managing for safety and safety culture within the UK nuclear industry. A regulator's perspective

    International Nuclear Information System (INIS)

    Tyrer, M.J.

    2002-01-01

    This paper outlines the basis of the legal system for the regulation of health and safety at work within the United Kingdom (UK), and in particular, the regulation of the nuclear industry. The framework, formulated by the regulator, which has been published as a practical guide for directors, managers, health and safety professionals and employee representatives for the successful management of health and safety is explained. This guidance, however, concentrates, to a large extent, on management systems and only addresses in part the types of issues, such as behaviours, values, attitudes and beliefs which contribute to the safety culture of an organization. The regulator of the UK nuclear industry has considered research, and other work, carried out by several organizations in this area, notably the Advisory Committee on the Safety of Nuclear Installations (ACSNI) and the International Atomic Energy Agency (IAEA), and produced its own framework for managing for safety at nuclear installations. As a regulator, the Health and Safety Executive (HSE), and its inspectorate responsible for regulation of the nuclear industry, HM Nuclear Installations Inspectorate (HMNII), are not the appropriate organization to assess the safety culture of an organization, but positively encourage organizations to both carry out this assessment themselves and to monitor their performance. To this end, HSE has developed, and made available, the Health and Safety Climate Tool which is aimed at providing organizations with information which can be used as part of a continuous improvement process. (author)

  12. Management of health, safety and environment in process industry

    DEFF Research Database (Denmark)

    Duijm, Nijs Jan; Fiévez, C.; Gerbec, M.

    2008-01-01

    The present status of industrial HSE management in a number of EU member states is reviewed, with a focus on the integration of health, safety and environment in single management systems. The review provides insight into the standards and paradigms adopted by industry, and it identifies trends...

  13. Managing mixed wastes: technical issues

    International Nuclear Information System (INIS)

    Lytle, J.E.; Eyman, L.D.; Burton, D.W.; McBrayer, J.F.

    1986-01-01

    The US Department of Energy manages wastes that are both chemically hazardous and radioactive. These mixed wastes are often unique and many have national security implications. Management practices have evolved over the more than forty years that the Department and its predecessor agencies have been managing these wastes, both in response to better understanding of the hazards involved and in response to external, regulatory influences. The Department has recently standarized its waste management practices and has initited an R and D program to address priority issues identified by its operating contractor organizations. The R and D program is guided by waste management strategy that emphasizes reduction of human exposure to hazardous wastes in the environment, reduction of the amount and toxicity of wastes generated, treatment of wastes that are generated to reduce volumes and toxicities, and identification of alternatives to land disposal of wastes that remain hazardous following maximum practicable treatment

  14. The Optimization-Based Design and Synthesis of Water Network for Water Management in an Industrial Process: Refinery Effluent Treatment Plant

    DEFF Research Database (Denmark)

    Sueviriyapan, Natthapong; Siemanond, Kitipat; Quaglia, Alberto

    2014-01-01

    The increasing awareness of the sustainability of water resources has become an important issue. Many process industries contribute to high water consumption and wastewater generation. Problems in industrial water management include the processing of complex contaminants in wastewater, selection...... of wastewater treatment technologies, as well as water allocation, limited reuse, and recycling strategies. Therefore, a water and wastewater treatment network design requires the integration of both economic and environmental perspectives. The aim of this work was to modify and develop a generic model......-based synthesis process for a water/wastewater treatment network design problem utilizing the framework of Quaglia et al. (2013) in order to effectively design, synthesize, and optimize an industrial water management problem using different scenarios (both existing and retrofit system design). The model...

  15. Evolution of hospital industrial engineering: from scientific management to total quality management.

    Science.gov (United States)

    Sahney, V K

    1993-01-01

    Industrial engineering applications in the hospital industry first began in 1910. This paper traces the evolution of hospital industrial engineering in five distinct phases. For each of the major phases, this paper presents the contributions made by industrial engineers. Many of the techniques advocated by industrial engineers are now being taught to hospital employees as hospitals introduce total quality management (TQM) within the health-care industry. TQM introduction has meant a new role for industrial engineers, as that of a teacher, coach, and a facilitator. This new role holds much promise for the improvement of quality and productivity in health care.

  16. Institutionalization of Markets and Issues of the Growth of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Zamazii Oksana V.

    2015-09-01

    Full Text Available The article developes and proves a scientific hypothesis that strengthening the integration processes in the market space causes its institutionalization, and thus leads to the issues of proliferation of the free market players as a result of a division of spheres of influence between the major financial-industrial groups and corporations. It has been proved that a clear hierarchical structure, along with rigid subordination of free economic agents to the chief processor of resources within the growing corporations are those preconditions, which gradually form characteristics of an organization or an institution in terms of markets. An author's own definition of the notion of «institutional market» has been proposed, which is different from the classic formulation. It is emphasized that institutionalization of market space turns the latter into an another economic system, the main characteristics of which are: limited number of buyers and sellers; presence of conglomerates with rigid hierarchical relationships between buyers and sellers; etc. Enlargement and diversification of business as well as growth of its influence not only within its own industry sector, but also in the related sectors, leads to the fact that corporations are trying to control markets (supply and demand which meantime are turning into rigid management structures, acquiring characteristics of institutions (organizations. This hinders the market entry of new market players, increases risks of business and requires on the part of enterprises new marketing techniques for positioning the own ability to create customer value.

  17. Special issue on ageing management and long term operation of light water reactors

    International Nuclear Information System (INIS)

    Kashima, Koichi; Kanno, Masanori; Kimura, Itsurou

    2008-01-01

    Ageing management and long term operation of light water reactors became important in Japan and relevant research on physical and materials ageing has been carried out among organizations of government, academia and industry and establishment of technical standards and guideline based on the results is under way. The Japan Energy Policy Institute (JEPI) issued a special number discussing this theme, which consisted of ten reports of experts describing these activities. Main topics were ageing evaluation of reactor components due to neutron irradiation embrittlement and stress corrosion cracking, regulatory evaluation of deteriorations due to ageing with technical information basis, technology development in the area of inspection/monitoring, ageing evaluation and preventive maintenance/repairs, nuclear power plant life management of electric utilities, and advancement of reactor maintenance and inspection. (T. Tanaka)

  18. System analysis of industrial waste management: A case study of industrial plants located between Tehran and Karaj

    OpenAIRE

    Mohammad Amin Karami; Mohsen Sadani; Mehdi Farzadkia; Nezam Mirzaei; Anvar Asadi

    2015-01-01

    Aims: In this study, management of industrial waste in industries located between Tehran and Karaj in 2009-2010 was examined. Materials and Methods: This is a cross-sectional study which was done by site survey (Iranian environmental protection organization) questionnaire usage and results analysis. This questionnaire was consisted of 45 questions about industrial waste, quantity, quality, and management. A total number of industries with over 50 employees was 283, and Stratified sampling...

  19. Managing strategic alliances in the power generation industry

    DEFF Research Database (Denmark)

    Kumar, Rajesh

    2003-01-01

    Highlights the challenges for power development developers in initiating alliances in the power generation industry. Importance of strategic alliances in the industry; Nature of the alliances in the independent power industry; Strategies for creating and sustaining value in global power development......; Management of tensions inherent in internal and external alliances....

  20. Proceedings of the 18. international symposium on mine planning and equipment selection (MPES 2009) and the 11. international symposium on environmental issues and waste management in energy and mineral production (SWEMP 2009) : mine planning and equipment selection and environmental issues and waste management in energy and mineral production

    International Nuclear Information System (INIS)

    Singhal, R.K.; Mehrotra, A.; Fytas, K.; Ge, H.

    2009-01-01

    This conference focused on the application of innovative technologies to the mineral industries and the development of productive methods for the mining and processing industries. It was attended by participants from North and South America, Europe, Australia, Africa and Asia with backgrounds in computer sciences, mining engineering and research in mineral production. The major topics addressed regarding mine planning and equipment selection included economic and technical feasibility studies; reserve estimation; mine development; design and planning of surface and underground mines; drilling, blasting, tunneling and excavation engineering; mining equipment selection; automation and information technology; maintenance and production management for mines and mining systems; mining in terms of health, safety and the environment; and rock mechanics and geotechnical applications. The topics addressed regarding waste management in energy and mineral production included the environmental impacts of coal-fired power projects; mining and reclamation; water management; social aspects of rehabilitation; sustainable development for mineral and energy industries; remediation of contaminated soil and groundwater; health hazard and safety issues in small-scale mining; environmental issues in surface and underground mining of metalliferous, coal, uranium and industrial minerals; occupational health and safety; control of effluents from mineral processing, metallurgy and chemical plants; emerging technologies for environmental protection; reliability of waste containment structures; and tailings treatment, recycling and disposal. The conference featured 162 presentations, of which 30 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  1. NDA generic research programme for higher activity waste management issues - 16390

    International Nuclear Information System (INIS)

    McKinney, James; Brownridge, Melanie

    2009-01-01

    NDA has a responsibility to ensure decommissioning activities are sufficiently technically underpinned and appropriate Research and Development (Rand D) is carried out. The NDA funds research and development (R and D) indirectly via the Site Licence Companies (SLCs) or directly. The main component of directly funded R and D is the NDA Direct Research Portfolio (DRP). The DRP is split into four framework areas: - University Interactions; - Waste Processing; - Material Characterisation; - Actinide and Strategic Nuclear Materials. These four framework areas were competed through an Official Journal of European Union (OJEU) process in 2008. Although all four areas involve waste management, Waste Processing and Material Characterisation specifically deal with Higher Activity Waste (HAW) waste management issues. The Waste Processing area was awarded to three groups: (i) National Nuclear Laboratory (NNL), (ii) Consortium led by Hyder Consulting Ltd, and (iii) Consortium led by UKAEA Ltd. The Material Characterisation area was awarded to three groups: (i) NNL, (ii) Serco, and (iii) Consortium led by UKAEA Ltd. The initial work in Waste Processing and Material Characterisation was centered on establishing a forward research programme to address the generic needs of the UK civil nuclear industry and the NDA strategic drivers for waste management and land quality. This has been achieved by the four main framework contractors from the Waste Processing and Materials Characterisation areas working together with the NDA to identify the key research themes and begin the development of the NDA's HAW Management Research Programme. The process also involves active engagement with both industry and regulators via the Nuclear Waste Research Forum (NWRF). The NDA's HAW Management Research Programme includes a number of themes: - Optimisation of Interim Store Operation and Design; - Alternative Waste Encapsulants; - Waste Package Integrity; - Alternative Waste treatment methods

  2. Sustainable industrial estate by managing the building coverage ratio in Cibitung Industrial Town, Indonesia

    Science.gov (United States)

    Budiyanto, T. M. T.; Prajitno, I. S.; Hasibuan, H. S.

    2018-03-01

    The problem faced in the management of the industrial estate is the development of industrial buildings which are not in accordance with the existing environmental regulations, especially the building coverage ratio (BCR). This violation is due to the limitation of industrial land owned, and the tenant’s desire to maximize building area. This research conducted at Cibitung Industrial Town, Indonesia, to assess the compliance of industrial building in complying with environmental regulations, and efforts by industrial estate manager together with industrial communities to meet building regulations. The compliance is shown from the conformity of the tenant’s BCR to the building provisions contained in the regulation within the industrial estate; which is maximum 60% from land owned. And whether the rest of green open space (GOS) area can still be maintained at a minimum 10%. This study found tenant’s building density (BCR) at 24.55% population was 84.77%, and the rest of green open space at 21.56% population was only 2.49%. Excessive building development and expansion by the industrial communities, led to a continued reduction in green open space as a rainwater absorption area. It is resulting the rainfall runoff directly into the environmental drainage system, and causing flooding in the region.

  3. Proceedings of the 1. international workshop on energy management in the mining industry 2010: Enermin

    International Nuclear Information System (INIS)

    2010-01-01

    The first international workshop on energy management in the mining industry, ENERMIN 2010, was held in Santiago, Chile, from November 14th to November 16th, 2010. The purpose of this conference, organized by Gecamin, was to gather experts from the mining industry to analyse some of the principal aspects of reliable, sustainable and low-cost energy supply and the efficient use of energy in mining and metallurgical processes. The conference was attended by over 160 professionals and experts from 11 different countries and participants had the opportunity to hear about some of the latest technologies and to discuss different issues relating to efficient energy use in the mining industry with other experts. 25 out of the 31 papers presented during this conference have been catalogued separately for inclusion in this database

  4. Assessment of industrial liquid waste management in Omdurman Industrial Area

    International Nuclear Information System (INIS)

    Elnasri, R. A. A.

    2003-04-01

    This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

  5. Assessment of industrial liquid waste management in Omdurman Industrial Area

    Energy Technology Data Exchange (ETDEWEB)

    Elnasri, R A. A. [Institute of Environmental Studies, University of Khartoum, Khartoum (Sudan)

    2003-04-15

    This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

  6. Environmental management in nuclear industry

    International Nuclear Information System (INIS)

    Pillai, K.C.; Bhat, I.S.

    1988-01-01

    Safety of the environment is given due attention right at the design state of nuclear energy installations. Besides this engineered safety environmental protection measures are taken on (a) site selection criteria (b) waste management practices (c) prescribing dose limits for the public (d) having intensive environmental surveillance programme and (e) emergency preparedness. The paper enumerates the application of these protection measures in the environmental management to make the nuclear industry as an example to follow in the goal of environmental safety. (author)

  7. The status of wastewater management in Shokuhieh industrial park (A case study of Qom province

    Directory of Open Access Journals (Sweden)

    Mohammad Fahiminia

    2015-12-01

    Full Text Available Background: Water resource management is a strategic issue in Qom city. Water scarcity is one of the most critical concerns of industrial estates. This study aimed to evaluate wastewater management in the Shokuhieh industrial park of Qom province in 2013. Methods: This is a descriptive cross-sectional study done by visiting the industrial units in person, completing questionnaires and analyzing the results. The questionnaire had 25 questions, including general information, the status of water supply, treatment and consumption, wastewater production, reuse or discharge of produced wastewater and the status of wastewater treatment and discharge of effluent. The industrial units evaluated were active with over 50 personnel and numbered 44 in total. Results: The water suppliers in the industries included network (70.5%, network and reverse osmosis (RO (22.5%, network and tanker (2.4% and tanker (4.6%. 63.63% of the industries had water treatment systems. 19.5% reused wastewater and 31.8% performed pretreatment before discharge of wastewater. The discharge sites of water treatment units’ effluent included the absorption well (17%, greenbelt (18% and sewer (65%. Discharge sites of sanitary wastewater in 50% of the industries was sewer and in 50%, it was absorption well. The discharge sites of processed wastewater was reuse (2%, sewer (52% and absorption well (46%. Discharge sites of exiting effluent from pretreatment units in the industrial park, included sewer (85.5%, transport by tanker (7.1% and absorption well (7.1%. The type of pretreatment process in 35.7% of the industries was chemical and in 64.3%, it was septic tank. Conclusion: The results of this study showed that pre-treatment is not done in most industries and wastewater reuse is performed in few industries. The main method of wastewater disposal in industries was by discharge into the sewer and absorbent well.

  8. Integrated project management information systems: the French nuclear industry experience

    International Nuclear Information System (INIS)

    Jacquin, J.-C.; Caupin, G.-M.

    1990-01-01

    The article discusses the desirability of integrated project management systems within the French nuclear power industry. Change in demand for nuclear generation facilities over the last two decades has necessitated a change of policy concerning organization, cost and planning within the industry. Large corporate systems can benefit from integrating equipment and bulk materials tracking. Project management for the nuclear industry will, in future, need to incorporate computer aided design tools and project management information systems data bases as well as equipment and planning data. (UK)

  9. Integrated project management information systems: the French nuclear industry experience

    Energy Technology Data Exchange (ETDEWEB)

    Jacquin, J.-C.; Caupin, G.-M.

    1990-03-01

    The article discusses the desirability of integrated project management systems within the French nuclear power industry. Change in demand for nuclear generation facilities over the last two decades has necessitated a change of policy concerning organization, cost and planning within the industry. Large corporate systems can benefit from integrating equipment and bulk materials tracking. Project management for the nuclear industry will, in future, need to incorporate computer aided design tools and project management information systems data bases as well as equipment and planning data. (UK).

  10. American Health Information Management Association. Position statement. Issue: managing health information in facility mergers and acquisitions.

    Science.gov (United States)

    1994-04-01

    Healthcare facility mergers and acquisitions are becoming more common as the industry consolidates. Many critical issues must be considered in mergers and acquisitions, including the management of patient health information. In addition to operational issues, licensure, regulatory, and accreditation requirements must be addressed. To ensure availability of health information to all legitimate users, patient records should be consolidated or linked in the master patient index. A record retention policy should be developed and implemented to meet user needs and assure compliance with legal, regulatory, and accreditation requirements. If health information from closed facilities will be stored for a period of time, its integrity and confidentiality must be preserved, and it must be readily accessible for patient care. The compatibility and functionality of existing information systems should be assessed, and a plan should be formulated for integration of the systems to the extent possible. Such integration may be essential for the organization to successfully meet the demands of integrated delivery systems. Existing databases should be maintained in an accessible form to meet anticipated future needs.

  11. Management of change in the nuclear industry - Evidence from maintenance reorganizations

    International Nuclear Information System (INIS)

    Reiman, T.; Oedewald, P.; Rollenhagen, C.; Kahlbom, U.

    2006-03-01

    The nuclear industry and especially the maintenance activities have been under various restructuring initiatives in addition to continuous incremental change due to e.g. new technologies, ageing plants, deregulation and the change of generation. These changes have been experienced as causing stress and uncertainty among the workers. Also, changes have lead to e.g. lowered sense of control, goal unclarity and lowered sense of personal responsibility over one's work. Organizational changes clearly are issues that have potential effects on safety. Both positive and negative cases on safety effects of organizational changes exist, and various accidents have been pinpointed to organizational changes in the company. In this report the challenges of management of change at nuclear power plants are considered mainly from organizational culture -perspective. The cultural perspective taken in this paper strives to combine technical approaches to human resources approaches. The report focuses on evidence gathered from studies made at Nordic NPP maintenance units, but the results and models depicted in the report are of general relevance in the nuclear industry. The report is based on four case studies of reorganizing in NPP maintenance units and on a literature review of change management at various other safety critical organizations. The report presents a framework for considering organizational changes and their safety consequences. (au)

  12. Management of change in the nuclear industry - Evidence from maintenance reorganizations

    Energy Technology Data Exchange (ETDEWEB)

    Reiman, T.; Oedewald, P. [VTT Industrial Systems (Finland); Rollenhagen, C.; Kahlbom, U. [Maelardalen Univ. (Sweden)

    2006-03-15

    The nuclear industry and especially the maintenance activities have been under various restructuring initiatives in addition to continuous incremental change due to e.g. new technologies, ageing plants, deregulation and the change of generation. These changes have been experienced as causing stress and uncertainty among the workers. Also, changes have lead to e.g. lowered sense of control, goal unclarity and lowered sense of personal responsibility over one's work. Organizational changes clearly are issues that have potential effects on safety. Both positive and negative cases on safety effects of organizational changes exist, and various accidents have been pinpointed to organizational changes in the company. In this report the challenges of management of change at nuclear power plants are considered mainly from organizational culture -perspective. The cultural perspective taken in this paper strives to combine technical approaches to human resources approaches. The report focuses on evidence gathered from studies made at Nordic NPP maintenance units, but the results and models depicted in the report are of general relevance in the nuclear industry. The report is based on four case studies of reorganizing in NPP maintenance units and on a literature review of change management at various other safety critical organizations. The report presents a framework for considering organizational changes and their safety consequences. (au)

  13. Industrial pollution and the management of river water quality: a model of Kelani River, Sri Lanka.

    Science.gov (United States)

    Gunawardena, Asha; Wijeratne, E M S; White, Ben; Hailu, Atakelty; Pandit, Ram

    2017-08-19

    Water quality of the Kelani River has become a critical issue in Sri Lanka due to the high cost of maintaining drinking water standards and the market and non-market costs of deteriorating river ecosystem services. By integrating a catchment model with a river model of water quality, we developed a method to estimate the effect of pollution sources on ambient water quality. Using integrated model simulations, we estimate (1) the relative contribution from point (industrial and domestic) and non-point sources (river catchment) to river water quality and (2) pollutant transfer coefficients for zones along the lower section of the river. Transfer coefficients provide the basis for policy analyses in relation to the location of new industries and the setting of priorities for industrial pollution control. They also offer valuable information to design socially optimal economic policy to manage industrialized river catchments.

  14. The Emergence of Industrial Marketing Management as the Leading Academic Journal in Business-to-Business Marketing

    DEFF Research Database (Denmark)

    Di Benedetto, C. Anthony; Lindgreen, Adam

    2018-01-01

    During 1994–2016, Peter LaPlaca served as editor-in-chief of Industrial Marketing Management, an era in which the research discipline surrounding business-to-business marketing showed remarkable growth and attracted the attention of scholars worldwide. This article traces the evolving maturity...... of the discipline during these years by analyzing not just statistics but also the content of the premier journal in this area, Industrial Marketing Management. The number of papers submitted and articles published per year, the growth in the journal's impact factor, the increased presence of international authors...... and editorial board members, and the arrival of meta-analyses and special issues on emerging research topics all indicate the level of maturity and scope of the business-to-business marketing research discipline attained during this period— thanks to the expert guidance and tireless efforts of Professor La...

  15. Customer relationship management in the fashion industry

    OpenAIRE

    Kamblevičiūtė, Kamilė

    2016-01-01

    Customer Relationship Management in the Fashion Industry The fashion industry is a product of the modern age. In ancient times, most of clothes were handmade, or so-called home-made, which were made on individual basis. Due to the development of new technologies, the rise of global capitalism, the expansion of factory systems, the attitude towards the concept of clothing was shifting. The fashion industry consists of four levels: raw material, the design of fashion goods, manufacturing, marke...

  16. TRANSPORTATION INDUSTRY EFFECTIVE MANAGEMENT CONDITIONS

    Directory of Open Access Journals (Sweden)

    V. I. Kuznetsov

    2011-01-01

    Full Text Available Main aspects that determine conditions of transportation industry effective management and decrease of transportation expenses are discussed. Theoretical concepts making it possible to solve the problem of scientific management of the whole country’s goods transportation costs are provided for. Main approaches are presented to the solution of motor transport operation ecological optimization problem as well as to the rise of motor transport workers’ labor productivity, to the increase of transportation vehicles use efficiency and to determine functional capacity of the motor transport complex.

  17. Environmental management in Slovenian industrial enterprises - Empirical study

    Directory of Open Access Journals (Sweden)

    Vesna Čančer

    2002-01-01

    Full Text Available timulated with the firm belief that environmental management helps enterprises to achieve business success, expressed by a majority of managers in the sample enterprises, we present the results of an empirical study in the Slovene processing industry. The purpose of our research work is to identify, analyse and present the importance of the environment in business decision-making, the role of environmental management in strategic decision-making and its distribution across the business functions; environmental performance in business processes; the use of the methods for environmentally oriented business decision-making and the developmental tendencies of environmental management in Slovene enterprises of the processing industry. We define the key drivers of environmental management and their effect on the environmental behaviour of these enterprises. We present and interpret data indicating that environmental management is caused not only by compliance and regulation, but also by competition and enterprises’ own initiative.

  18. Design of management information system for nuclear industry architectural project costs

    International Nuclear Information System (INIS)

    Zhang Xingzhi; Li Wei

    1996-01-01

    Management Information System (MIS) for nuclear industry architectural project is analysed and designed in detail base on quota management and engineering budget management of nuclear industry in respect of the practice of Qinshan Second Phase 2 x 600 MW Project

  19. From "Embrace and Change" to "Engage and Change": Trade Union Renewal and New Management Strategies in the UK Automotive Industry?

    Science.gov (United States)

    Stewart, Paul; Wass, Victoria

    1998-01-01

    Interviews with 32 British union representatives and a survey of 200 auto workers found that union strength was renewed because of new management techniques in industry, which have increased local autonomy. Unions are directly engaged in the issues involved in teamwork, quality control, and flexible manufacturing. (SK)

  20. Hazardous and Industrial Wastes Management: a Case Study of Khazra Industrial Park, Kerman

    Directory of Open Access Journals (Sweden)

    Hossein Jafari Mansoorian

    2013-08-01

    Full Text Available Background & Aims of the Study: Increasing hazardous industrial wastes and lack of necessary regulations for management of them have led to serious problems in some parts of Iran. The aim of this study was to evaluate the situation of collection, transportation, recycling, and disposal of hazardous industrial wastes in the Khazra Industrial Park of Kerman, Iran. Materials & Methods: This study was a descriptive cross-sectional study that was done using questionnaires and local visits during year 2009. In this questionnaire, some information about the industrial wastes, production, storage on site , collection, transformation, sorting, recycling, and disposal were recorded. Results:   In the Khazra Industrial Park, 71,600 kg/day of different industrial waste is produced. The biggest proportion of waste includes metals, and construction and demolition waste which are about 16,500 tons a year. The smallest proportion is non-iron metal waste, which is produced at a rate of 8 tons per year. 88.7 percent of the active industries at the Khazra Industrial Park produce solid industrial waste. Most of the industrial units do not use a united and coordinated system for storing waste and have no specific place for temporary storage inside the industrial park. The majority of industrial waste collection, which is about 59.8%, is done by private contractors. The industrial units transfer their waste separately, and just 9 industrial units recycle their waste. Disposal of these wastes is mainly done by selling to trading agencies. Each day, 3 tons of hazardous industrial waste is produced in this park. The highest production belongs to the oil factory (Keyhan Motor. Conclusions: According to the results, the Khazra Industrial Park needs a unified system for storing, transporting and collecting the sorted waste, and it also needs to have a transportation station with basic facilities. The wastes of most industrial units at the Khazra Industrial Park have the

  1. Nontechnical issues in waste management: ethical, institutional, and political concerns

    International Nuclear Information System (INIS)

    Hebert, J.A.; Rankin, W.L.; Brown, P.G.; Schuller, C.R; Smith, R.F.; Goodnight, J.A.; Lippek, H.E.

    1978-05-01

    The report consists of a presentation and distillation of major nontechnical issues surrounding commercial waste management, followed by ethical, institutional, and political analyses of these issues. The ethical analysis consists of a discusson of what is meant by ''ethics'' and ''morality'' in the waste management context and an illustrative attempt at an ethical analysis of the commercial nuclear waste problem. Two institutional analyses are presented: one is an analysis of the possible problems of long-term human institutions in waste management; the other is a presentation of institutional arrangements for the short term. A final chapter discusses issues and concerns involving intergovernmental relations--that is, local, state, and federal interface problems in waste management

  2. Summary of technical information and agreements from Nuclear Management and Resources Council industry reports addressing license renewal

    International Nuclear Information System (INIS)

    Regan, C.; Lee, S.

    1996-10-01

    In about 1990, the Nuclear Management and Resources Council (NUMARC) submitted for NRC review ten industry reports (IRs) addressing aging issues associated with specific structures and components of nuclear power plants ad one IR addressing the screening methodology for integrated plant assessment. The NRC staff had been reviewing the ten NUMARC IRs; their comments on each IR and NUMARC responses to the comments have been compiled as public documents. This report provides a brief summary of the technical information and NUMARC/NRC agreements from the ten IRs, except for the Cable License Renewal IR. The technical information and agreements documented herein represent the status of the NRC staffs review when the NRC staff and industry resources were redirected to address rule implementation issues. The NRC staff plans to incorporate appropriate technical information and agreements into the draft standard review plan for license renewal

  3. Case analysis online: a strategic management case model for the health industry.

    Science.gov (United States)

    Walsh, Anne; Bearden, Eithne

    2004-01-01

    Despite the plethora of methods and tools available to support strategic management, the challenge for health executives in the next century will relate to their ability to access and interpret data from multiple and intricate communication networks. Integrated digital networks and satellite systems will expand the scope and ease of sharing information between business divisions, and networked systems will facilitate the use of virtual case discussions across universities. While the internet is frequently used to support clinical decisions in the healthcare industry, few executives rely upon the internetfor strategic analysis. Although electronic technologies can easily synthesize data from multiple information channels, research as well as technical issues may deter their application in strategic analysis. As digital models transform access to information, online models may become increasingly relevant in designing strategic solutions. While there are various pedagogical models available to support the strategic management process, this framework was designed to enhance strategic analysis through the application of technology and electronic research. A strategic analysis framework, which incorporated internet research and case analysis in a strategic managementcourse, is described alongwith design and application issues that emerged during the case analysis process.

  4. Some Issues on Management Information System Course Teaching

    OpenAIRE

    Chen, Dingquan

    2008-01-01

    This paper discuses the following issues about Management Information System course for the major of information management & Information System: Teaching Object, the difference between Information System Analysis and Design course, teaching content, and experiment plan.

  5. Issues related to EM management of DOE spent nuclear fuel

    International Nuclear Information System (INIS)

    Abbott, D.G.; Abashian, M.S.; Chakraborti, S.; Roberson, K.; Meloin, J.M.

    1993-07-01

    This document is a summary of the important issues involved in managing spent nuclear fuel (SNF) owned by the Department of Energy (DOE). Issues related to civilian SNF activities are not discussed. DOE-owned SNF is stored primarily at the Hanford Site, Idaho National Engineering Laboratory (INEL), Savannah River Site (SRS), Oak Ridge National Laboratory (ORNL), and West Valley Demonstration Project. Smaller quantities of SNF are stored at Brookhaven National Laboratory, Sandia National Laboratories, and Los Alamos National Laboratory (LANL). There is a wide variety of fuel types, including both low and high enrichment fuels from weapons production, DOE reactors, research and development programs, naval programs, and universities. Most fuel is stored in pools associated with reactor or reprocessing facilities. Smaller quantities are in dry storage. Physical conditions of the fuel range from excellent to poor or severely damaged. An issue is defined as an important question that must be answered or decision that must be made on a topic or subject relevant to achieving the complimentary objectives of (a) storing SNF in compliance with applicable regulations and orders until it can be disposed, and (b) safely disposing of DOE's SNF. The purpose of this document is to define the issues; no recommendations are made on resolutions. As DOE's national SNF management program is implemented, a system of issues identification, documentation, tracking, and resolution will be implemented. This document is an initial effort at issues identification. The first section of this document is an overview of issues that are common to several or all DOE facilities that manage SNF. The common issues are organized according to specific aspects of spent fuel management. This is followed by discussions of management issues that apply specifically to individual DOE facilities. The last section provides literature references

  6. Resensi Buku Islamic Perspective on Management: Contemporary Issues

    OpenAIRE

    Kusuma, Bayu Mitra Adhyatma

    2016-01-01

    Judul buku : Islamic Perspective on Management: ContemporaryIssuesPenulis : Nor ‘Azizah Kamri, dkk.Penerbit : YaPEIM Management Academy (kerjasamadengan University of Malaya Press)Tebal : xiv + 463 halamanCetakan pertama : November 2013Kota terbit : Kuala Lumpur

  7. 25 Years since the First Issue of the Journal „Robotica & Management”

    Directory of Open Access Journals (Sweden)

    Corneliu Rădulescu

    2015-06-01

    Full Text Available The journal "Robotica & Management" was intended to be issued twice a year, stating with 1990. The first issue of the journal “Robotica & Management” in July 1990 (Fig. 4, was edited by the Robotics Association of Romania. At the present time, the journal is edited by: − Robotics Society of Romania, − ''Eftimie Murgu'' University of Reşiţa, − County Council Caras-Severin, − Politehnica University Timişoara. Through publishing of scientific papers, the journal aims to promote Robotics and Management, both in theoretical research and industrial or economical applications. The contributions published in the journal approach issues regarding: • the mechanical system of industrial and service robots; • actuation and control of robots; • application of robots in industry and service; •implementation of robotic systems in manufacturing and servicing; • study of flexible manufacturing systems; • modeling and simulation; • management.

  8. Environmental issues and economic performance of the coal industry in Brazil

    International Nuclear Information System (INIS)

    Santana, E.A.; Seabra, F.; Wendhausen, J.

    1996-01-01

    The purpose of this study is to investigate the main sources of inefficiency of the Brazilian coal industry. In addition, the authors examine the current and the future competitiveness of the Brazilian coal industry taking into account the effects of globalization, the modernization of the mining techniques and, most important, the environmental costs regarded under the concept of sustainable development. This paper examines some of the causes behind the alleged inefficiency of coal production and coal-electric generation, with special emphasis to environmental issues. The rest of the paper is organized as follows. Section 2 outlines a profile of the energetic potential of coal reserves in Brazil. In section 3, the authors discuss environmental restrictions and other features that can be related to the performance of the coal industry in Brazil

  9. Inernational research in health care management: its need in the 21st century, methodological challenges, ethical issues, pitfalls, and practicalities.

    Science.gov (United States)

    Buttigieg, Sandra C; Rathert, Cheryl; D'Aunno, Thomas A; Savage, Grant T

    2015-01-01

    This commentary argues in favor of international research in the 21st century. Advances in technology, science, communication, transport, and infrastructure have transformed the world into a global village. Industries have increasingly adopted globalization strategies. Likewise, the health sector is more internationalized whereby comparisons between diverse health systems, international best practices, international benchmarking, cross-border health care, and cross-cultural issues have become important subjects in the health care literature. The focus has now turned to international, collaborative, cross-national, and cross-cultural research, which is by far more demanding than domestic studies. In this commentary, we explore the methodological challenges, ethical issues, pitfalls, and practicalities within international research and offer possible solutions to address them. The commentary synthesizes contributions from four scholars in the field of health care management, who came together during the annual meeting of the Academy of Management to discuss with members of the Health Care Management Division the challenges of international research. International research is worth pursuing; however, it calls for scholarly attention to key methodological and ethical issues for its success. This commentary addresses salient issues pertaining to international research in one comprehensive account.

  10. New structural changes in Kazakhstan petroleum and gas industry management

    International Nuclear Information System (INIS)

    Nadirov, N.K.; Konaev, Eh.N.

    1998-01-01

    The basic stags of structural changes in Kazakhstan petroleum and gas industry management are considered. It is shown, that in new economic situation the traditional branch scheme of management became out date and does not meet demands up the times. The spent structural changes in petroleum and gas industry management will promote to strengthening of strategic role of hydrocarbon raw material production and processing in prospect. (author)

  11. Waste Material Management: Energy and materials for industry

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    This booklet describes DOE`s Waste Material Management (WMM) programs, which are designed to help tap the potential of waste materials. Four programs are described in general terms: Industrial Waste Reduction, Waste Utilization and Conversion, Energy from Municipal Waste, and Solar Industrial Applications.

  12. Nontechnical issues in waste management: ethical, institutional, and political concerns

    Energy Technology Data Exchange (ETDEWEB)

    Hebert, J.A.; Rankin, W.L.; Brown, P.G.; Schuller, C.R; Smith, R.F.; Goodnight, J.A.; Lippek, H.E.

    1978-05-01

    The report consists of a presentation and distillation of major nontechnical issues surrounding commercial waste management, followed by ethical, institutional, and political analyses of these issues. The ethical analysis consists of a discusson of what is meant by ''ethics'' and ''morality'' in the waste management context and an illustrative attempt at an ethical analysis of the commercial nuclear waste problem. Two institutional analyses are presented: one is an analysis of the possible problems of long-term human institutions in waste management; the other is a presentation of institutional arrangements for the short term. A final chapter discusses issues and concerns involving intergovernmental relations--that is, local, state, and federal interface problems in waste management.

  13. IMPROVING MANAGEMENT ACCOUNTING AND COST CALCULATION IN DAIRY INDUSTRY USING STANDARD COST METHOD

    Directory of Open Access Journals (Sweden)

    Bogdănoiu Cristiana-Luminiţa

    2013-04-01

    Full Text Available This paper aims to discuss issues related to the improvement of management accounting in the dairy industry by implementing standard cost method. The methods used today do not provide informational satisfaction to managers in order to conduct effectively production activities, which is why we attempted the standard cost method, it responding to the managers needs to obtain the efficiency of production, and all economic entities. The method allows an operative control of how they consume manpower and material resources by pursuing distinct, permanent and complete deviations during the activity and not at the end of the reporting period. Successful implementation of the standard method depends on the accuracy by which standards are developed and promotes consistently anticipated calculation of production costs as well as determination, tracking and controlling deviations from them, leads to increased practical value of accounting information and business improvement.

  14. Managing the interface with marketing to improve delivery of pharmacovigilance within the pharmaceutical industry.

    Science.gov (United States)

    Edwards, Brian

    2004-01-01

    The pharmaceutical industry is under pressure to improve the scientific quality of its decisions concerning the benefit and risks of its products while ensuring compliance with acceptable standards of marketing. All those in a pharmaceutical company who currently work within pharmacovigilance should be encouraged to lead from the front to examine ongoing marketing activities to see how they can be adapted more towards pharmacovigilance and risk management. The current irony is that the personnel who have the greatest influence on benefit-risk decisions of a product are not necessarily those who acknowledge that they are performing pharmacovigilance. Indeed, for all concerned, whether their orientation is scientific and commercial, effective communication with prescribers and consumers usually underpins product success. Also, a substantial 'marketing' budget is culturally acceptable for the pharmaceutical industry so it is logical to assume that resource for postmarketing activity is often made available. Given these realities, I suggest we should strive for an integrated marketing and risk-management plan based on the best available evidence and that being fully aware and in control of the safety issues for your products is the best way to commercialise them successfully. This approach can still be consistent with other corporate responsibilities such as trying to reduce the financial burden of product development. If this article stimulates further debate about how the pharmaceutical industry can more effectively organise resources and operations to support pharmacovigilance, risk management, and marketing, then it will have achieved its purpose.

  15. Total quality management analysis in printing industry | Ching ...

    African Journals Online (AJOL)

    Total quality management analysis in printing industry. ... Journal of Fundamental and Applied Sciences ... The organization is suggested to implement Total Quality Management (TQM) in order to improve the quality of the products and hence ...

  16. The T-Shape dilemma in industrial engineering and management curriculum

    Directory of Open Access Journals (Sweden)

    Sigal Koral Kordova

    2014-10-01

    Full Text Available Purpose: This paper deals with the undergraduate “Industrial Engineering and Management” curriculum. The research’s purpose was to examine the in-depth coverage of teaching/learning in the combined field of industrial engineering and management, as opposed to the extent of widthwise multidisciplinary teaching/learning in this field (T-Shape dilemma. According to this purpose, the following research question was derived: With respect to widthwise multidisciplinary teaching and the depth extent of teaching in industrial engineering and management, what is the desired situation as opposed to the actual situation? Design/methodology/approach: In order to examine the T-shape dilemma, 16 in-depth interviews were conducted with senior-level managers in industry, and with leading academics in the fields of industrial engineering and management. The interviewees were asked questions regarding the planning and design of the curriculum in these fields. An analysis of the interviews was carried out by dividing the interviews into categories, and presenting the categories with the highest frequency occurring in all of the interviews. Findings and Originality/value: One of the most significant results was the great variability between the answers of senior-level managers in industry and those of the academics. While individuals in the business field (senior-level managers place great importance on focusing studies on the management-business aspect, and acquiring multidisciplinary knowledge, academics emphasized the great importance of understanding the theories and rationale behind the learned material, acquiring a strong theoretical basis, and studying the basic principles, whose implementation is then expressed in a wide diversity of applications. Research limitations/implications: Owing to time limitations, the research only included 16 in-depth interviews. In order to enlarge the external validity of this research more interviews should be executed

  17. Strategic Issues in University Information Management

    Science.gov (United States)

    Roosendaal, Hans E.

    This chapter represents a specific view on university management. It sequentially discusses different organizational levels of e-teaching, starting with general management, e-science developments and what this means to universities, and business models followed by focusing on specific teaching issues. The chapter sets out to discuss the development of the university from a loose federation of faculties into a more integrated university, such as, e.g., an entrepreneurial university. This development is also driven by the introduction of the bachelors/masters system - a process which leads to the need for an institutional strategy introducing institutional quality management and has to be accompanied by the independent accreditation of research and teaching. Applying the model of strategic positioning to the university as a whole leads to the introduction of the university entrepreneur. The model is used to describe structural issues and the relations between the primary processes of research and teaching with the secondary processes. e-science is introduced as a further step toward the universal sharing of scientific results and to analyze the kind of incentives that will be required to attain this goal of making information an even more integral part of the research and teaching process.

  18. Site remediation technologies and environmental management practices in the utility industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Sessions covered: chemical oxidation; DNAPL and source management; regulatory perspectives and state programs; manufactured gas plant site management; sediments, cyanides, and other issues at MGP sites; biotechnology applications; agricultural waste issues; risk communication and bioremediation; air emissions and air toxics management; project management and redevelopment; environmentally acceptable endpoint and risk-based site management; site assessment, background concentration and closure; risk communication and beneficial use by recycling; PCB and RCRA issues; and phytoremediation and bioremediation of wastes.

  19. Proceedings of the Infonex oil sands 2005 conference : an industry summit on emerging trends in exploration, production and resource management

    International Nuclear Information System (INIS)

    2005-01-01

    This conference provided a forum to discuss the opportunities and challenges facing the oil sands industry with particular reference to resource characterization and supply and market outlooks to 2015. The driving forces behind oil sands development were also identified. The conference featured 12 presentations that dealt with a range of issues including resource management; operations management; price and cost sharing; emerging transmission pipeline challenges and opportunities; the fiscal regime for oil sands; minimizing the environmental impact of oil sands development; cumulative effects management and the regulatory approval process. An overview of a joint venture by Alberta Environment Northern Region and the Alberta Geological Survey to update existing maps of buried bedrock and drift channels in the oil sands mining and in-situ recoverable areas was included along with an overview of economic and environmental benefits of gasification. A new technology known as multiphase superfine atomized residue (MSAR) as an alternate fuel in oil sands production was discussed along with the issue of bridging the gap between the oil sand industry and First Nations partners. Three of the 12 presentations were catalogued separately for inclusion in this database. tabs., figs

  20. The application of holistic risk management in the banking industry

    Directory of Open Access Journals (Sweden)

    J. Chibayambuya

    2007-12-01

    Full Text Available Purpose: The application of holistic risk management is fast becoming a standard measure of good governance in the business arena. What role can holistic risk management play in the management of risk in the financial services industry? The aim of this paper is to propose a holistic risk management framework for the management of risk. Design/Methodology/Approach: A comprehensive framework that covers the holistic view risk management is proposed/developed out of an extensive literature review. Findings: Given the deliberations of various frameworks, a holistic risk management is proposed. The proposed framework ensures that all components of risk management are taken into account when strategizing for risk management in general and holistic risk management in particular; thereby improving the management of risk in the banking industry. Implications: The article proposes a holistic approach to risk management which takes into account all the facets of risk management, e.g. analyzing, planning, strategy, communication, implementation, motivation, systems review and plan modification. This holistic approach, when implemented in the banking industry, can have a significant impact on the improved management of risk. Originality/Value: The new proposed holistic risk management framework offers a fresh perspective of strategizing for risk management in terms of risk analysis, risk planning, risk strategy, risk communication, risk implementation, risk motivation, risk review and risk plan modification.

  1. Management and Quality of Services in Pristina’s Hotelier Industry

    Directory of Open Access Journals (Sweden)

    Petrit Hasanaj

    2018-04-01

    Full Text Available Management of tourism hotel industry and especially the quality of services in hotel industry are important and successful factors of business. The concept of quality of service is essential if we wish to understand the genesis of service quality and potential gaps in quality. The purpose of this paper is to show the importance of service quality in the hotel industry from the standpoint of conceptual and description attributes influencing this quality. Today to manage the industry of tourism and hotelier in a more efficient and effective way means to take a step towards the country's economic growth, boost employment at satisfactory levels and welfare of the population. This management is a positive publicity for the country and attracting tourists who bring more income and new social and cultural cooperation.

  2. The Role of ISO 9000 Certification on Waste Management of Leather Industry

    International Nuclear Information System (INIS)

    Susetyo Hario Putero; Dhani Astuti

    2008-01-01

    State of industry in an area could increase economy of this area. On the other hand, industry may be produce the waste. There are many factor influencing the success of industrial waste management. At present, ISO 14000 is known as an international environmental management standard. Practically, several matter required for ISO 14000 are similar with ISO 9000. So, the role of ISO 9000 certification on supporting waste management program of leather industry has been studied. Study has been pursued by comparing the environmental management systems of 2 leather industries in Sitimulyo, Piyungan, Bantul. Staff working way has been observed to know the suitability with working procedures and implementation of safety aspect on daily working. Observation of waste treatment facility and measurement of Chrome concentration also has been done. Samples were analysed using AAS method in Department of Chemistry, Faculty of Mathematics and Natural Science, Gadjah Mada University. Decontamination Factor (DF) was calculated by comparing the Chrome concentrations on outside plant and in waste treatment facility. Commitment of management and orderliness of system as required on ISO 9000 certification could push the industry to well execute waste management program as a part of environmental management system. ISO 9000 certification is convinced to make awareness of industry grow for continually improving their capability, including their capacity of waste treatment facility. (author)

  3. A review on the current issues and barriers of Industrialised Building System (IBS) adoption in Malaysia’s construction industry

    Science.gov (United States)

    Amin, M. A. Mohd; Abas, N. H.; Shahidan, S.; Rahmat, M. H.; Suhaini, N. A.; Nagapan, S.; Rahim, R. Abdul

    2017-11-01

    Malaysia considers the construction industry as one of the main contributors to its Gross Domestic Product (GDP). However, there are some unresolved issues arising from the ongoing and widespread adoption of the conventional method of construction such as the resultant fragmentation of the industry itself; delays in production and delivery time of unnecessary wastages and lack of sustainability practice. Malaysian Government has been continuously encouraging the industry to use, partly or if not wholly, the Industrialized Building System (IBS), which is considered to be an important part of sustainable construction initiative. IBS was introduced to Malaysia as the solution to issues related to dependencies of foreign workers, raising demand for affordable accommodations and improving image, quality and productivity of construction industry. However, the IBS adoption in Malaysia remains low. This paper presents the review of the current issues and barriers of IBS adoption in Malaysian construction industry.

  4. Examination of issues related to the development and implementation of real-time operational safety monitoring tools in the nuclear power industry

    International Nuclear Information System (INIS)

    Puglia, William J.; Atefi, Bahman

    1995-01-01

    In recent years, risk and reliability techniques have been increasingly used to optimize deterministic requirements and to improve the operational safety of nuclear power stations. This paper discusses the historical development and current status of implementation of real-time operational safety monitoring tools in the nuclear power industry worldwide. A safety monitor is defined as a PC-based risk management tool, based on a plant specific PSA, which can be used to manage plant safety during the day-to-day operation of a nuclear power plant by planning maintenance activities and providing advisory information to plant operational staff in order to avoid high risk plant configurations. As this technique has only been applied in a few plants worldwide, the technology is still evolving and there are several technical and implementation-related issues which still need to be resolved. This paper attempts to summarize all such issues and describe how they have been addressed in several different applications of this technology around the world

  5. Industrial aspects of radioactive waste management in Western Europe

    International Nuclear Information System (INIS)

    Marcus, F.R.

    1976-01-01

    Various aspects of waste management are discussed from the viewpoint of the nuclear industry. Future amounts of waste generated in the 15 Foratom countries in Western Europe are estimated. Industrial waste questions--as seen by electricity producers, reprocessors, and waste operators--are discussed; questions concerning decommissioning are also dealt with. A number of recommendations for further action, primarily on the part of national authorities and international organizations, are put forward. One conclusion of the study is that there is no reason for waste-management problems to impede the timely development of nuclear energy as a large-scale industrial activity in Western Europe

  6. Management of industrial sites and areas contaminated by radionuclides in France

    International Nuclear Information System (INIS)

    Oudiz, A.; Rousseau, D.

    2001-01-01

    The presentation involves two parts making mention on the one hand on the industrial sites management and on the other hand on contaminated areas management. In a third part, are considered the analogies and the differences susceptible of appearing in the management modes of industrial sites and areas. (N.C.)

  7. Prospects and opportunities the implementation of effective management models at the enterprises of the Russian industry

    OpenAIRE

    E. S. Balashova; E. A. Gromova

    2016-01-01

    In 2015 the recession of the Russian economy continues. Economic forecasts of 2016 made by influential rating agencies and the International Monetary Fund are analyzed. It is emphasized that the course of structural economic changes, selected by the Russian government actualizes the issue of increasing the competitiveness of Russian industry on a global level that, in turn, contributes to the implementation of effective management models at the enterprises and organization of internal process...

  8. Formation of activation mechanism for investment maintenance management of gas industry enterprises

    Directory of Open Access Journals (Sweden)

    Вікторія Валеріївна Чорній

    2016-11-01

    Full Text Available The problematic aspects of the existing management mechanism of investment management of gas industry enterprises are analyzed in the article. The ways of their elimination are suggested in accordance with the Energy Strategy of Ukraine – 2035 at different levels of its operation. The ways of improving the investment management mechanism of the enterprises in this industry on three levels are proved. Activation mechanism for investment maintenance management of gas industry enterprises is developed as result of research. Its implementation will allow enterprises of the industry to increase its investment attractiveness and effectively carry out the procedure for enterprises’ entry to the market of initial public offering to raise the required amount of investment resources for the modernization of investigated industry.

  9. Technology Trends and Opportunities for Construction Industry and Lifecycle Management

    OpenAIRE

    Janson, Vidar

    2017-01-01

    Master's thesis in for Offshore Technology: Industrial Asset Management The purpose of the report is to highlight methods that can make it easier for the construction industry and industry in general to benefit from new technology. The report is intended as a reference to technological solutions that along with some techniques, can streamline workflow for multiple tasks in planning, design, and operation and maintenance management. The problems focused on is how to: • Simplify the procu...

  10. A CEO View of Key Issues in Australian Information Systems Management - 1997

    Directory of Open Access Journals (Sweden)

    Graham Pervan

    1998-05-01

    Full Text Available As part of a research programme on key information systems management issues, a survey of Australasia's largest 500 organisations was conducted to identify which issues were perceived by their chief executive officers (CEOs as being important, problematic and critical over the next three to five years. The results reported are based on a relatively low response rate (though perhaps reasonable for the target group so should be regarded as only exploratory. The most critical issues were revealed to be a mix of technology management issues (IT infrastructure, disaster recovery, strategic management issues (BPR, competitive advantage, information architecture, people management issues (organisational learning, systems development and data management issues (effective use of the data resource, effectiveness/productivity of IS, effectiveness of software development, and their own support systems (EIS/DSS. This reflects their interest in a wide range of issues, but all with an organisation-wide focus. Non-critical issues were mostly related to the individual technologies and the place and role of IS in the organisation. While the CEOs showed some agreement with their chief information officers (CIOs on issues such as the IT infrastructure, competitive advantage, and organisational learning some distinct differences exist, particularly in relation to the quality and effectiveness of systems and processes and also how CEOs and CIOs perceive each other.

  11. Panel discussion on 'Government and industry social responsibility towards potential communities hosting radioactive waste management sites'

    International Nuclear Information System (INIS)

    Cragg, W.; Storey, K.; Cooper, H.; McIntyre, J.; Brown, P.

    2006-01-01

    'Full text:' In healthy democracies, support from local communities for industrial/development projects is highly desirable. What are the respective roles of the various stakeholder sectors, i.e. governments, industry, and communities around industrial projects, including waste management facilities, and how can they interact with sustainable development in mind? Should the private sector be involved in public policy? Should the public sector have an active role in providing funding complementing the notion of the Polluter pays principle? Should communities have a greater role in overseeing the activities of industry and be enabled to do so? Should communities be empowered to increase their role in decision-making processes? Are there trends emerging in this area? Are there improvements to be made? The Not-in-My-Backyard (NIMBY) reflex is not e thical . Thoughtful review is required when considering the right or the desirability to develop. Each of the invited panel members will briefly approach this issue from the perspective of their respective sector. A discussion period will ensue which hopefully will provide insight into how diverse sectors can work together to ensure the establishment of radioactive waste management facilities in communities which support such projects based on local and national values. (author)

  12. PERCEPTION OF MANAGERS ON PERFORMANCE - EMPIRICAL STUDY CONDUCTED IN THE HOSPITALITY INDUSTRY ENTITIES IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Scorte Carmen Mihaela

    2014-12-01

    Full Text Available We seek performance. We want to become performers, but undoubtedly most often we forget to get down to the essence of things, wondering "What is performance?". But what is meant by performance in the hospitality and tourism industry, an industry that is booming at world level, but which, at the same time, in the local area, faces an environment increasingly difficult? What is the perception of managers about this concept? This was one of the questions addressed to managers in the hospitality industry Bihor within a broader empirical research that targeted the importance of accounting information for the management of entities in this sector. The basis of the empirical research is a survey conducted between November 2012 and January 2013, the working tool used being a questionnaire that consists of 38 questions administered on the ground and online. The total population consists of 146 economic entities in the sector in Bihor; the sample consists of 91 tourist entities and the response rate is 62.33 % as a result of research in the field. 83.5% of the managers surveyed said that the most important factor influencing the performance in this sector is the occupancy rate of the capacities available, in second place as a factor of influence being the demand for services and travel packages offered, in the view of 75.8 % of respondents. It is surprising that less than 50% of the managers surveyed identified as a factor influencing the performance the accounting result of the business. Based on these results we also wanted to identify what measures are taken by managers in the sector to increase occupancy rate. The research conducted adds value to the indigenous research on issues regarding management accounting in hospitality and tourism industry, but also in the perception of performance, paving the way for future research. As limitations of our research we can identify the restricted area of application of the questionnaires (Bihor county, but also

  13. Legal and regulatory education and training needs in the healthcare industry.

    Science.gov (United States)

    Henson, Steve W; Burke, Debra; Crow, Stephen M; Hartman, Sandra J

    2005-01-01

    As in any other industry, laws and regulations significantly impact the functioning of the healthcare industry. Some laws, such as those relating to malpractice and social insurance systems, affect the manner in which the industry operates. Other laws, such as those regulating antitrust and employment practices, affect the organization and the environment in which the industry operates. It is increasingly important that practitioners and managers be cognizant of this complex and dynamic legal minefield. This study examined healthcare managers and executives' knowledge of 9 key issues in the legal and regulatory environment of the healthcare industry. Specifically, the study focused on knowledge concerning tort and contract liability, insurance law, labor and employment regulation, criminal and ethical responsibility, antitrust regulation, the law governing business associations and recent developments. Findings suggest that the levels of knowledge required to manage legal and regulatory issues are much greater than the existing levels of knowledge.

  14. Decision Support for Environmental Management of Industrial ...

    Science.gov (United States)

    Non-hazardous solid materials from industrial processes, once regarded as waste and disposed in landfills, offer numerous environmental and economic advantages when put to beneficial uses (BUs). Proper management of these industrial non-hazardous secondary materials (INSM) requires estimates of their probable environmental impacts among disposal as well as BU options. The U.S. Environmental Protection Agency (EPA) has recently approved new analytical methods (EPA Methods 1313–1316) to assess leachability of constituents of potential concern in these materials. These new methods are more realistic for many disposal and BU options than historical methods, such as the toxicity characteristic leaching protocol. Experimental data from these new methods are used to parameterize a chemical fate and transport (F&T) model to simulate long-term environmental releases from flue gas desulfurization gypsum (FGDG) when disposed of in an industrial landfill or beneficially used as an agricultural soil amendment. The F&T model is also coupled with optimization algorithms, the Beneficial Use Decision Support System (BUDSS), under development by EPA to enhance INSM management. The objective of this paper is to demonstrate the methodologies and encourage similar applications to improve environmental management and BUs of INSM through F&T simulation coupled with optimization, using realistic model parameterization.

  15. Digging Deeper: Crisis Management in the Coal Industry

    Science.gov (United States)

    Miller, Barbara M.; Horsley, J. Suzanne

    2009-01-01

    This study explores crisis management/communication practices within the coal industry through the lens of high reliability organization (HRO) concepts and sensemaking theory. In-depth interviews with industry executives and an analysis of an emergency procedures manual were used to provide an exploratory examination of the status of crisis…

  16. Total quality management in hotel industry

    OpenAIRE

    Mitreva, Elizabeta; Saneva, Dusica; Miteva, Natasa

    2017-01-01

    Total quality management (TQM) is a systematic management approach aiming at continuous increase of the value offered to consumers through improvement of service quality. In hotel industry, success is achieved through service quality, which stands as a key factor for sustainability in the twenty-first century. Nowadays, quality is the basic factor for survival on the market, better competition, and greater profitability. TQM is a process that starts and ends with the consumer. The aim of this...

  17. Prospects and opportunities the implementation of effective management models at the enterprises of the Russian industry

    Directory of Open Access Journals (Sweden)

    E. S. Balashova

    2016-01-01

    Full Text Available In 2015 the recession of the Russian economy continues. Economic forecasts of 2016 made by influential rating agencies and the International Monetary Fund are analyzed. It is emphasized that the course of structural economic changes, selected by the Russian government actualizes the issue of increasing the competitiveness of Russian industry on a global level that, in turn, contributes to the implementation of effective management models at the enterprises and organization of internal processes. Positively recommended concept of lean production abroad became popular in Russia in early 2000’s. First successful example of its implementation – CJSC “Ford Motor Company” is considered. A large number of enterprises which represent state corporations “Rosteh” and “Rosatom”, industrial group “Basic element”, OJSC “Russian Railways” and which are individual major representatives of the Russian industrial sector are investigated. Different ways of development of lean production by Russian enterprises are analyzed and the most common way – independent interpretation and implementation is identified. Review of the tools of this management model used at the Russian enterprises is paid great attention. The prevalence of such tool as 5S (approximately 87,5%, because of its visible simplicity of understanding and ease of implementation is noted. The most important indicator – the economic effect of the introduction of the lean production concept at the enterprises of Russian industry in 2014 is analyzed. It is concluded that the economic result of the use of management model at Russian industrial enterprises is extremely low and varies at most about 1% of revenue. The obtained results demonstrate the prospects of further development of lean production and prove the possibility of achieving a high competitiveness of the domestic industrial sector of economy.

  18. Management of logistics chains of industrial enterprises in high-tech industries

    Directory of Open Access Journals (Sweden)

    Demchenko Alexander

    2017-01-01

    Full Text Available The article analyses the trends of high-tech industries development in the market globalization conditions. The economic growth of high-tech industries largely depends on technological innovations, products and equipment based on usage of the results of applied and fundamental scientific researches. It is shown that characteristics of high-tech productions influence the logistics chain structure. It justifies the importance to include partnering enterprises taking part in creation of intellectual and tangible assets in the logistic chain of the industrial enterprise. It is noted that development of production technologies contributes to formation of innovative logistic chains, which participants are enterprises cooperating for achievement of competitive power. The article offers a model of an industry logistic chain comprising the conventional logistic chain and innovative logistic chains corresponding to the industry market segments. It is proposed to use the customer value of the manufactured products as a criterion of the industrial enterprise’s logistic chains management efficiency. Implementation of the offered model of cooperation between the logistic chain participants is aimed at creation of a continuous innovations flow, reduction of technological development costs and uniting of the participants’ experience.

  19. Women's Path to Management in the Hotel and Catering Industry.

    Science.gov (United States)

    Hotel and Catering Training Board, Wembley (England).

    A study examined the employment patterns of women working in the United Kingdom's hotel and catering industry and the opportunities for vocational education that would lead to careers in management. Sixty-four women from different sectors of the industry were interviewed (including women in senior and middle management and some still looking to be…

  20. Critical issues facing R&D managers in China

    NARCIS (Netherlands)

    de Boer, S.J.; Gan, Weibing; Shan, Guogang

    1998-01-01

    R&D managers in China experienced significant changes in the past decade, in particular because of Government policies of economic reform and opening to the outside world. These developments have brought about a number of rather specific R&D management issues and problems. The paper addresses the

  1. Aviation Technology Life Cycle Management: Importance for Aviation Companies, Aerospace Industry Organizations and Relevant Stakeholders

    Directory of Open Access Journals (Sweden)

    Stanislav Szabo

    2017-04-01

    Full Text Available The paper in the introductory part underlines some aspects concerning the importance of Aviation Technology Life Cycle Management and informs on basic international standards for the processes and stages of life cycle. The second part is focused on definition and main objectives of system life cycle management. The authors subsequently inform on system life cycle stages (in general and system life cycle processes according to ISO/IEC/IEEE 15288:2015 standard. Following the fact, that life cycle cost (LCC is inseparable part and has direct connection to the life cycle management, the paper contains brief information regarding to LCC (cost categories, cost breakdown structure, cost estimation a.o.. Recently was issued the first part of Aviation Technology Life Cycle Management monograph (in Slovak: ”Manažment životného cyklu leteckej techniky I”, written by I.Koblen and S.Szabo. Following this fact and direct relation to the topic of article it is a part of article briefly introduced the content of two parts of this monograph (the 2nd part of monograph it has been prepared for the print. The last part of article is focused on issue concerning main assumptions and conditions for successful application of aviation technology life cycle management in aviation companies, aerospace industry organizations as well as from the relevant stakeholders side.

  2. Records Management Practices in the Zambian Pension Industry ...

    African Journals Online (AJOL)

    The need for organisations to demonstrate good corporate governance remains unquestionable. Effective management of ... Unless they systematically manage their information recorded in different media, most organisations including the pension industry in Zambia risk punitive damages. The overall aim of this study was ...

  3. Issues engulfed Saudi Arabia construction workers

    Science.gov (United States)

    Al-Emad, N. H.; Rahman, I. A.

    2018-04-01

    This paper presents an exploratory study conducted in Makkah city to uncover issues faced by construction workers from the construction leaders’ perspective. Eleven construction leaders/experts were interviewed to unleash their experiences on handling the foreign workers working in Makkah construction projects. Most of the experts are senior management staffs with more than 10 years’ working experience in Saudi Arabia construction industry. The interviews were carried out in semi structured mode where all the information was captured manually and also electronically. The identified issues were sorted based on its commonality into 10 clusters. Hence in each cluster, the numbers of issue considered by the experts are reflecting the importance of that particular cluster. The result of the clusters according to the number of issues mentioned by the experts are safety issues, restricted government regulation, demotivated issues, lack of quality workers, poor living quality, communication barriers, adaption issues, poor attitudes, lack of logistical arrangements and lack of education. With these identified issues it will assist the construction players in the construction industry of Saudi Arabia in dealing with their workers.

  4. Intelligence Community Programs, Management, and Enduring Issues

    Science.gov (United States)

    2016-11-08

    books, journal papers, conference presentations, working papers, and other electronic and print publications. Intelligence Community Programs... Intelligence Community Programs, Management, and Enduring Issues Anne Daugherty Miles Analyst in Intelligence and National Security Policy...

  5. Human capital in nuclear industry

    International Nuclear Information System (INIS)

    Anon.

    2010-01-01

    On June 7, 2010, as part of the Atomexpo 2010 exhibition, a round-table discussion took place on the topic Human capital in the nuclear industry: challenges and solutions. The article summarizes reports made during the meeting. Tatiana Kozhevnikova, deputy director general of the Rosatom Corporation, made a report about the strategy and best human resource management practices in member companies of the Corporation. She briefly described the state of the human capital in the Russian nuclear industry and outlined the key provisions of the human resource management strategy. Attendees to the round-table discussion elaborated further on the key statements of the report. The discussion has given an evidence that the Russian nuclear industry is giving an enormous importance to human resource management and is firmly intended on successfully tacking the issues associated with the provision of sufficient staff for the industry's safe and efficient development [ru

  6. The Integrated Crisis Management Model for the Hotel Industry: Lowering Crisis Susceptibility and Strengthening Stakeholder Relationship Management

    Directory of Open Access Journals (Sweden)

    Nicola ZECH

    2016-03-01

    Full Text Available This research paper focuses on crisis management processes within the hotel industry – an industry which still seems reluctant in implementing profound and structured crisis management concepts. Responses to crisis situations are mostly intuitive and ad-hoc. In times of high competition in almost all destinations, categories and conceptions no opportunity of convincing guests as well as all other stakeholders of a trustworthy management shall be missed in order to gain competitive advantage. Each corporate crisis affects several or all stakeholder groups of the organisation – to a varying extent. Stakeholders might either affect or be affected by the hotel organisation and the respective crisis management processes. Taking the manifold opportunities for co-operation of a hotel organisation and its respective stakeholder groups into consideration, an integrated crisis management model for the hotel industry is evolved based both on theoretical foundations and empirical findings from the analysis of expert interviews as well as stakeholder surveys. The model neutralizes the deficits and discrepancies revealed between general crisis management literature and status quo respectively specific prerequisites for the hotel industry.

  7. Citation Classics from Industrial Marketing Management

    DEFF Research Database (Denmark)

    Lindgreen, Adam; Di Benedetto, C. Anthony

    2017-01-01

    , system sellers and systems integrator, third-party logistics providers, and value). Finally, each of the 30 citation classics is introduced, and the classics' theoretical implications to business-to-business marketing management and fields related to (e.g., supply chain management, strategic management......This article proposes a categorization of what constitutes a citation classic. General observations reveal, with regard to the top 30 citation classics from Industrial Marketing Management, the number of authors per article, country of origin of the lead author, and type of article (literature...... review, qualitative methodology, or quantitative methodology). In addition, these citation classics can be classified by topic (firm performance, goods-dominant and service-dominant logics, Internet and high-technology markets, product innovation, relationships and business networks, supply chains...

  8. The South African wine industry: Insights survey 2013

    CSIR Research Space (South Africa)

    Blok, T

    2013-09-01

    Full Text Available PwC’s 2013 South African wine industry insights survey explores some of the issues facing local wine businesses, specifically those evident from the financial results of the 2012 harvest, human resource management practices in the industry and wine...

  9. The Importance of Building and Enhancing Worldwide Industry Cooperation in the Areas of Radiological Protection, Waste Management and Decommissioning

    International Nuclear Information System (INIS)

    Saint-Pierre, S.

    2006-01-01

    The slow or stagnant rate of nuclear power generation development in many developed countries over the last two decades has resulted in a significant shortage in the population of mid-career nuclear industry professionals. This shortage is even more pronounced in some specific areas of expertise such as radiological protection, waste management and decommissioning. This situation has occurred at a time when the renaissance of nuclear power and the globalization of the nuclear industry are steadily gaining momentum and when the industry's involvement in international and national debates in these three fields of expertise (and the industry's impact on these debates) is of vital importance. This paper presents the World Nuclear Association (WNA) approach to building and enhancing worldwide industry cooperation in radiological protection, waste management and decommissioning, which is manifested through the activities of the two WNA working groups on radiological protection (RPWG) and on waste management and decommissioning (WM and DWG). This paper also briefly describes the WNA's participatory role, as of summer 2005, in the International Atomic Energy Agency (IAEA) standard development committees on radiation safety (RASSC), waste safety (WASSC) and nuclear safety (NUSSC). This participation provides the worldwide nuclear industry with an opportunity to be part of IAEA's discussions on shaping changes to the control regime of IAEA safety standards. The review (and the prospect of a revision) of IAEA safety standards, which began in October 2005, makes this WNA participation and the industry ' s involvement at the national level timely and important. All of this excellent industry cooperation and team effort is done through 'collegial' exchanges between key industry experts, which help tackle important issues more effectively. The WNA is continuously looking to enhance its worldwide industry representation in these fields of expertise through the RPWG and WM and DWG

  10. The importance of building and enhancing worldwide industry cooperation in the areas of radiological protection, waste management and decommissioning

    International Nuclear Information System (INIS)

    Saint-Pierre, S.

    2006-01-01

    The slow or stagnant rate of nuclear power generation development in many developed countries over the last two decades has resulted in a significant shortage in the population of mid-career nuclear industry professionals. This shortage is even more pronounced in some specific areas of expertise such as radiological protection, waste management and decommissioning. This situation has occurred at a time when the renaissance of nuclear power and the globalization of the nuclear industry are steadily gaining momentum and when the industry's involvement in international and national debates in these three fields of expertise (and the industry's impact on these debates) is of vital importance. This paper presents the World Nuclear Association (WNA) approach to building and enhancing worldwide industry cooperation in radiological protection, waste management and decommissioning, which is manifested through the activities of the two WNA working groups on radiological protection (RPWG) and on waste management and decommissioning (WM and DWG). This paper also briefly describes the WNA's participatory role, as of Summer 2005, in the International Atomic Energy Agency (IAEA) standard development committees on radiation safety (RASSC), waste safety (WASSC) and nuclear safety (NUSSC). This participation provides the worldwide nuclear industry with an opportunity to be part of IAEA's discussions on shaping changes to the control regime of IAEA safety standards. The review (and the prospect of a revision) of IAEA safety standards, which began in October 2005, makes this WNA participation and the industry's involvement at the national level timely and important. All of this excellent industry cooperation and team effort is done through 'collegial' exchanges between key industry experts, which help tackle important issues more effectively. The WNA is continuously looking to enhance its worldwide industry representation in these fields of expertise through the RPWG and WM and DWG

  11. Energy management оf industrial enterprise

    Directory of Open Access Journals (Sweden)

    Lyaskovskaya E.A.

    2017-01-01

    Full Text Available In the intensifying condition of economic situation and increasing competitiveness in domestic and foreign markets, the most important way to develop competitive ability of an industrial company is to reduce energy costs in the production process. Insufficient level of the efficiency of energy resources usage affects an industrial company’s performance indicators and its investment attractiveness. A promising way of solving this matter is to develop and implement a strategy of rational energy consumption, which is aimed at the realization of company’s potential to optimize the consumption of electric energy by using internal and external resources in order to minimize energy costs. The strategy of rational energy consumption defines how an industrial company acquires electric energy and uses it to sustain the production. While developing and implementing the strategy, one should use a systemic and complex way and consider the following: peculiarities of electric energy and power as products; the structure of electric energy market and the possibilities of its consumers; peculiarities of price-formation on electric energy market; technical and technological, organizational and administrative, social and economic parameters of a company, characteristic features of its resource potential and production processes; the results of company’s energy efficiency audit and energy problems; company’s reserves that can increase its energy efficiency. An integral strategy of energy consumption includes a strategy for energy preservation and efficiency and a strategy for energy costs management. Both strategies are interrelated and serve for one purpose, which is minimizing the energy costs. This division helps simplify the analysis, search for alternatives and realization of energy management on operative, tactical and strategic levels, considering the regional and industry-specific peculiarities of an industrial company, its financial performance and

  12. Getting Stakeholder Issues into the Management of Radioactive Waste

    International Nuclear Information System (INIS)

    Atherton, Elizabeth

    2001-01-01

    The issues raised in trying to develop long-term solution(s) for radioactive waste management are multidisciplinary - encompassing social, ethical, scientific and technical issues. Experience in the UK and elsewhere has shown that the process by which decisions are made needs to be accepted as being legitimate by all stakeholders. This paper argues that the key to achieving such acceptance is how one engages with stakeholders at the 'front-end' of any decision-making process. This paper focuses on radioactive waste management as the issue in question and outlines techniques that can be used during the 'front-end' consultation and gives examples of where they have been, and are being, used by Nirex

  13. Getting Stakeholder Issues into the Management of Radioactive Waste

    Energy Technology Data Exchange (ETDEWEB)

    Atherton, Elizabeth [UK Nirex Ltd, Didcot (United Kingdom)

    2001-07-01

    The issues raised in trying to develop long-term solution(s) for radioactive waste management are multidisciplinary - encompassing social, ethical, scientific and technical issues. Experience in the UK and elsewhere has shown that the process by which decisions are made needs to be accepted as being legitimate by all stakeholders. This paper argues that the key to achieving such acceptance is how one engages with stakeholders at the 'front-end' of any decision-making process. This paper focuses on radioactive waste management as the issue in question and outlines techniques that can be used during the 'front-end' consultation and gives examples of where they have been, and are being, used by Nirex.

  14. Managing risks and hazardous in industrial operations

    Energy Technology Data Exchange (ETDEWEB)

    Almaula, S.C. [Woodward-Clyde International, Oakland, CA (United States)

    1996-12-31

    The main objective of this paper is to demonstrate that it makes good business sense to identify risks and hazards of an operation and take appropriate steps to manage them effectively. Developing and implementing an effective risk and hazard management plan also contibutes to other industry requirements and standards. Development of a risk management system, key elements of a risk management plan, and hazards and risk analysis methods are outlined. Comparing potential risk to the cost of prevention is also discussed. It is estimated that the cost of developing and preparing the first risk management plan varies between $50,000 to $200,000. 3 refs., 2 figs., 1 tab.

  15. Current situation and issue of Industrial Accident Compensation insurance.

    Science.gov (United States)

    Kim, Inah; Rhie, Jeongbae; Yoon, Jo-Duk; Kim, Jinsoo; Won, Jonguk

    2012-05-01

    Industrial Accident Compensation Insurance (IACI) has a history of about 50 yr, and is the oldest social insurance system in Korea. After more than 20 times of revision improvements in benefits, its contents and claim systems have been upgraded. It became the protector of injured workers and their families, and at the same time became the system which could cope with both financial burden of employers and their responsibilities. However, there are some issues to be reformed to upgrade the IACI: 1) the problems in the approval system of occupational diseases, 2) quality improvement of workers' compensation medical care, 3) vocational rehabilitation and return to work, 4) workers' compensation premiums and out-of-pocket money of injured workers, 5) issues in application of IACI. Growth of IACI cannot be achieved by an effort of an individual. Efforts by workers, owners, and government, in addition to physicians and welfare professionals toward the same goal are required for the next level improvement of IACI.

  16. Impact of Fragmentation Issue in Construction Industry: An Overview

    Directory of Open Access Journals (Sweden)

    Mohd Nawi Mohd Nasrun

    2014-01-01

    Full Text Available In general, fragmentation within the construction industry arises from two areas within the traditional construction process; the construction work process where the most significant division is in the separation of the design and construction phase, and the construction structure itself. The fragmentation process in traditional contracting practice further hinders the integration of construction knowledge among contractors, diminishing the opportunity for them to influence design decisions. When design professionals fail to consider as to how a contractor would construct the designed project results in scheduling problems, delays, and disputes during the construction process. Moving towards team integration is considered a significant strategy for overcoming the issue. Accordingly, this paper discusses the fragmentation issue in more detail including its definition, and causes and effects to the construction projects. It also explores that the team integration strategy alleviates scheduling problems, and helps avoid delays and disputes during the construction process, preventing harm to overall project performance.

  17. Effective time management – selected issues

    Directory of Open Access Journals (Sweden)

    Aneta Olejniczak

    2013-03-01

    Full Text Available Deliberations included in this article contain the basic issues related to the subject of time management. As we know, people who waste their time the most, most complain about the lack of the time. We should treat our time, time of our co-workers, and friends as a valuable, but limited wealth. Principles of effective time management can be applied in any scientific and research institutions, companies or corporations. The benefits of a good and effective time management will be felt not only by ourselves but also by our friends and family. Detailed formulation of objectives, identification and elimination of time wasters and postponing work on later (Procrastination, using methods of time management and systematic control will allow for efficient use of time. A good plan is the basis for optimal and meaningful use of time.

  18. Issues Raised in Relation to Radioactive Waste Management

    International Nuclear Information System (INIS)

    Atherton, Elizabeth

    2003-01-01

    Nirex has undertaken various consultations with different stakeholders to identify their issues and concerns about radioactive waste management in general and specific aspects of Nirex's work. This paper will outline what dialogue techniques Nirex has undertaken and the issues and concerns that people have raised during the events. It will outline some of the work that Nirex is undertaking to address stakeholders' issues and concerns. Nirex has used a variety of dialogue techniques co-ordinated under the Nirex Involvement Programme to engage with stakeholders about the work we undertake. We are now trying to address the issues, concerns, scenarios and questions raised in our work programme. Key lessons that we have learned in undertaking the dialogues include: The importance of appropriate facilitation and organisation of meetings; The need for a clear purpose for meetings; Being flexible to the needs of the attendees and the issues they raise; Providing feedback to those who participate and following up issues. Through engaging with the public Nirex has learned that: Radioactive waste is not an everyday concern for people; The public can, will and want to engage with the issue of radioactive waste management. This includes engaging with the ethical debate. To facilitate this Nirex and others need to: Provide information in a neutral form outlining the pros and cons and including various people's opinions; Use proactive techniques to allow access and space for people to discuss the issues; Demonstrate how people's opinions have been taken into account. People understand the issues very differently to the way institutions understand them. There is a need for institutions to learn to understand public concerns and the ways in which the public understand issues, as well as for the public to understand the institutional positions better. We are using these insights to develop our future work in this area

  19. Energy Management in Industrial Plants

    Directory of Open Access Journals (Sweden)

    Dario Bruneo

    2012-09-01

    Full Text Available The Smart Grid vision imposes a new approach towards energy supply that is more affordable, reliable and sustainable. The core of this new vision is the use of advanced technology to monitor power system dynamics in real time and identify system in stability. In order to implement strategic vision for energy management, it is possible to identify three main areas of investigation such as smart generation, smart grid and smart customer. Focusing on the latter topic, in this paper we present an application specifically designed to monitor an industrial site with particular attention to power consumption. This solution is a real time analysis tool, able to produce useful results to have a strategic approach in the energy market and to provide statistic analysis useful for the future choices of the industrial company. The application is based on a three layers architecture. The technological layer uses a Wireless Sensor Network (WSN to acquire data from the electrical substations. The middleware layer faces the integration problems by processing the raw data. The application layer manages the data acquired from the sensors. This WSN based architecture represents an interesting example of a low cost and non-invasive monitoring application to keep the energy consumption of an industrial site under control. Some of the added value features of the proposed solution are the routing network protocol, selected in order to have an high availability of the WSN, and the use of the WhereX middleware, able to easily implement integration among the different architectural parts.

  20. Radioactive waste industrial management in France for medium- and long-term

    International Nuclear Information System (INIS)

    Lavie, J.-M.

    1981-01-01

    The context within which the industrial scale management of radioactive wastes takes place is briefly outlined. The regulations already in force or envisaged in France in this field are exposed. Emphasis is given to the activities of the National Agency for the management of radioactive wastes (ANDRA). The reasons why this organization was created are discussed together with the type of work conferred to it, its present workload, the industrial management concepts it applies, its present and future potential, the costs envisaged for waste disposal and the financial solutions adopted. The industrial technical assistance policy of ANDRA is presented [fr

  1. Energy management technologies: special focus on textile industry

    International Nuclear Information System (INIS)

    Dayo, F.B.O.

    2000-08-01

    Energy is a very important component of most manufacturing activities. Its level of importance depends on whether or not the manufacturing processes employed are energy intensive. For less energy intensive manufacturing activities, energy costs contribute only a small portion of total cost of production. Even in this case, it has been shown that considerable scope for cost savings through more efficient utilization of energy exist. Small investments in energy efficiency measures have been known to bring significant savings in production costs, and consequently improved profit margins. The advantages of better and efficient use of energy in an energy - intensive manufacturing outfit have been extensively demonstrated in many nations over the past few decades. For these groups, profitability improvement is usually more apparent, and the scope for achieving a cost savings through improved energy use efficiency, more considerable. Cost savings or profitability improvement is not the only reason for considering energy use efficiency improvement in a manufacturing facility. Energy use efficiency improvement is also the most effective way of reducing environmental pollutant emission such as greenhouse gases. Actual cost savings achievable will depend on factors such as: the production process; the age of the facilities; its design and maintenance; and the extent of pasts efforts in energy use efficiency improvements. Evidence suggests that for facilities where energy management has not been practiced, saving of between 10% to 20% on energy bills are possible, through simple measures, with quick payback period. When a manufacturing facility addresses issues of energy efficiency, through the institution of a viable energy management systems, it also takes a very necessary step towards obtaining international accreditation. Such accreditation include: the Eco-Management and Audit Scheme (EMAS); or the International Standard Organisation's ISO 14001. This is becoming a vital

  2. THE KEY ACTIVITIES OF GREEN LOGISTICS MANAGEMENT IN THE THAI AUTOMOTIVE INDUSTRY

    OpenAIRE

    Thanyaphat Muangpan; Mana Chaowarat; Jutaporn Neamvonk

    2016-01-01

    Thai automotive industry needs to be developed for understanding activities management on inbound logistics that is an essential element of business operations for a manufacturing firm. The purpose of research is to study the main activities of green logistics management (inbound logistics) in the Thai automotive industry. Survey research was used in this study to collect data by sampling from the people in the field of logistics and environmental management of Thai automotive industry to exa...

  3. Radiological protection, safety and security issues in the industrial and medical applications of radiation sources

    Science.gov (United States)

    Vaz, Pedro

    2015-11-01

    The use of radiation sources, namely radioactive sealed or unsealed sources and particle accelerators and beams is ubiquitous in the industrial and medical applications of ionizing radiation. Besides radiological protection of the workers, members of the public and patients in routine situations, the use of radiation sources involves several aspects associated to the mitigation of radiological or nuclear accidents and associated emergency situations. On the other hand, during the last decade security issues became burning issues due to the potential malevolent uses of radioactive sources for the perpetration of terrorist acts using RDD (Radiological Dispersal Devices), RED (Radiation Exposure Devices) or IND (Improvised Nuclear Devices). A stringent set of international legally and non-legally binding instruments, regulations, conventions and treaties regulate nowadays the use of radioactive sources. In this paper, a review of the radiological protection issues associated to the use of radiation sources in the industrial and medical applications of ionizing radiation is performed. The associated radiation safety issues and the prevention and mitigation of incidents and accidents are discussed. A comprehensive discussion of the security issues associated to the global use of radiation sources for the aforementioned applications and the inherent radiation detection requirements will be presented. Scientific, technical, legal, ethical, socio-economic issues are put forward and discussed.

  4. Training of Industrial Sphere Managers in a Specially Organized Education Environment

    Science.gov (United States)

    Gorshenina, Margarita; Firsova, Elena

    2016-01-01

    The professional activity of industrial sphere managers has an integrated character and includes managerial, economic and production activity. Due to this the structure of readiness of industrial sphere managers for professional activity is composed of three components: subject, reflexive and technological ones. The objective of this paper…

  5. System analysis of industrial waste management: A case study of industrial plants located between Tehran and Karaj

    Directory of Open Access Journals (Sweden)

    Mohammad Amin Karami

    2015-01-01

    Full Text Available Aims: In this study, management of industrial waste in industries located between Tehran and Karaj in 2009-2010 was examined. Materials and Methods: This is a cross-sectional study which was done by site survey (Iranian environmental protection organization questionnaire usage and results analysis. This questionnaire was consisted of 45 questions about industrial waste, quantity, quality, and management. A total number of industries with over 50 employees was 283, and Stratified sampling method was used. Sample of size 50 was selected from 283cases. Results: The major hazardous waste-generating industries include chemical and plastic. Private sectors disposed 45% of generated waste. Majority of wastes were buried (62%, and only 17% of industrial waste was recycled. Conclusion: For hazardous waste reduction in this zone and health and economic attractions, the opportunity for reuse and recovery for these wastes must maximize in short-term and burial of industrial waste must be minimized. Industries such as chemical-plastic and electronics which have higher hazardous waste, in long-term, must be replaced with other industries such as wood cellulose and paper that have lower hazardous waste production rate.

  6. Model Pengukuran Kinerja Customer Relationship Management dalam Industri Perbankan

    Directory of Open Access Journals (Sweden)

    Freddy Simbolon

    2014-05-01

    Full Text Available High competition in the banking industry requires the banking industry to properly manage relationships with customers, as it is known as Customer Relationship Management (CRM. CRM applications will become effective when supported by information technology. Investment in information technology is not a small investment, because the higher the information technology, the greater the value of the investment. This study aims to obtain a model of CRM performance measurement in the banking industry efficiently and effective. The method in this study uses descriptive analytical method, while the results obtained in this study is a CRM Scorecard. CRM Scorecard is one of the approach models that correctly measure the performance of CRM, which is based on information technology. Through CRM Scorecard approach, information technology investment in CRM is no longer seen as a cost center, but seen to be a profit center, because the company can manage customers efficiently and effectively in order to enhance shareholder value in the future.

  7. Crisis Management in the Hotel Industry in Finland

    OpenAIRE

    Hartmann, Jana

    2012-01-01

    Object of this thesis is Crisis Management in the Hotel Industry in Finland and is prepared in order to present the situation and the acting of hotel managers nowadays to guarantee guests a safe and secur stay and to rise the awareness among hoteliers towards crises as well as amongst employees, investors, stakeholders, authorities, and students from hospitality related fields. Main topic of this research is crisis management and concerns the process of developing a crisis management plan...

  8. An Investigation of Information Technology-Enabled Remote Management and Remote Work Issues

    Directory of Open Access Journals (Sweden)

    D. Sandy Staples

    1997-05-01

    Full Text Available A two phase research study was done to investigate remote work and remote management issues. In Phase 1, focus groups were carried out with remote managers and remote employees to identify key issues. The most common key issues dealt with communications, information technology, leadership and coaching, teamwork, building trust, and performance management. In the second phase, a questionnaire was used to test hypotheses developed from phase 1. The findings supported that higher trust leads to higher job satisfaction and lower job stress, and that more communication between the manager and the remote employee develops higher levels of employee organizational commitment.

  9. Management approaches to integrated solid waste in industrialized zones in Jordan: a case of Zarqa City.

    Science.gov (United States)

    Mrayyan, Bassam; Hamdi, Moshrik R

    2006-01-01

    There is a need to recognize the difficulties experienced in managing waste and to understand the reasons for those difficulties, especially in developing countries such as Jordan. Zarqa is a Governorate located in central Jordan, which has 2874 registered industries, making up more than 52% of the total industries in the country. Zarqa Governorate suffers from serious solid waste problems. These problems arise from an absence of adequate policies, facilitating legislation, and an environmentally enthused public, which therefore have a negative impact on the environment and health. Solid waste generation in Zarqa Governorate has increased exponentially and has polluted natural resources and the environment. A significant change in municipal solid waste generation was evident between the years 1994 and 2000. The Zarqa Governorate generated 482 tons/day in 2002 with a per capita rate of 0.44 kg/cap-day [Consulting Engineers, 2002, Feasibility study for the treatment of industrial wastewater in Zarqa Governorate. A project funded by METAP and Zarqa Chamber of Industry. Unpublished report]. This manuscript assesses the current operational and management practices of solid waste in the Zarqa Governorate; and evaluates the associated issues of solid waste collection, storage, transport, disposal and recycling in developing countries. The lack of techniques, financial funds and awareness among public and private sectors form an obstacle for achieving a successful environmental program. Several options are proposed to address management goals. Although Jordan became the first country in the Middle East to adopt a national environmental strategy; waste disposal is still largely uncontrolled and large quantities of waste go uncollected. Ensuring proper management of solid wastes, enforcing regulations, and implementing proper environmental awareness programs that will enhance the public understanding and achieve greater efficiency, are the findings of this study.

  10. Management approaches to integrated solid waste in industrialized zones in Jordan: A case of Zarqa City

    International Nuclear Information System (INIS)

    Mrayyan, Bassam; Hamdi, Moshrik R.

    2006-01-01

    There is a need to recognize the difficulties experienced in managing waste and to understand the reasons for those difficulties, especially in developing countries such as Jordan. Zarqa is a Governorate located in central Jordan, which has 2874 registered industries, making up more than 52% of the total industries in the country. Zarqa Governorate suffers from serious solid waste problems. These problems arise from an absence of adequate policies, facilitating legislation, and an environmentally enthused public, which therefore have a negative impact on the environment and health. Solid waste generation in Zarqa Governorate has increased exponentially and has polluted natural resources and the environment. A significant change in municipal solid waste generation was evident between the years 1994 and 2000. The Zarqa Governorate generated 482 tons/day in 2002 with a per capita rate of 0.44 kg/cap-day [Consulting Engineers, 2002, Feasibility study for the treatment of industrial wastewater in Zarqa Governorate. A project funded by METAP and Zarqa Chamber of Industry. Unpublished report]. This manuscript assesses the current operational and management practices of solid waste in the Zarqa Governorate; and evaluates the associated issues of solid waste collection, storage, transport, disposal and recycling in developing countries. The lack of techniques, financial funds and awareness among public and private sectors form an obstacle for achieving a successful environmental program. Several options are proposed to address management goals. Although Jordan became the first country in the Middle East to adopt a national environmental strategy; waste disposal is still largely uncontrolled and large quantities of waste go uncollected. Ensuring proper management of solid wastes, enforcing regulations, and implementing proper environmental awareness programs that will enhance the public understanding and achieve greater efficiency, are the findings of this study

  11. UW-Stout's Bachelor's in Industrial Management

    Science.gov (United States)

    Dittmann, Wendy

    2008-01-01

    The Bachelor of Science in Industrial Management (BSIM) was designed for technical college graduates with work experience because the University of Wisconsin-Stout (UW-Stout) recognized a need among adult students with technical college degrees. The program was developed to provide these students with an opportunity to earn baccalaureate degrees…

  12. Petroleum industry of Korea seen from industry

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H.P. [SK Co, Seoul (Korea, Republic of)

    1998-05-01

    The domestic petroleum industry faced with outward opening and exchange crisis is put under the most difficult period so far, and costs reduction and securing international competitive power in software field are emerging as important assignments on which the life and death of national key industries depends not only as a restructuring issue of each petroleum company. Required strategy of petroleum industry to solve this effectively this year must be the thorough revamping through restructuring and reform of management standards not the survival exercise through price competition. For this, each petroleum company and distributor should open a new petroleum industry in which fair rules of the game are developed as well as costs reduction through joint efforts and value creation in overall industry. For this, government should support the domestic petroleum industry to stand up straight as a keeper of domestic energy industry by helping it to arm with international competitive power within a short period of time through overall needed system and legal scheme. It is because nobody can deny that energy industry is the key industry on which national existence is at stake.

  13. Decommissioning and material recycling. Radiation risk management issues

    International Nuclear Information System (INIS)

    Dodd, D.H.

    1996-09-01

    Once nuclear fuel cycle facilities have permanently stopped operations they have to be decommissioned. The decommissioning of a nuclear facility involves the surveillance and dismantling of the facility systems and buildings, the management of the materials resulting from the dismantling activities and the release of the site for further use. The management of radiation risks associated with these activities plays an important role in the decommissioning process. Existing legislation covers many aspects of the decommissioning process. However, in most countries with nuclear power programmes legislation with respect to decommissioning is incomplete. In particular this is true in the Netherlands, where government policy with respect to decommissioning is still in development. Therefore a study was performed to obtain an overview of the radiation risk management issues associated with decommissioning and the status of the relevant legislation. This report describes the results of that study. It is concluded that future work at the Netherlands Energy Research Foundation on decommissioning and radiation risk management issues should concentrate on surveillance and dismantling activities and on criteria for site release. (orig.)

  14. Potential Interface Issues in Spent Fuel Management

    International Nuclear Information System (INIS)

    2015-10-01

    This publication is an output of a series of meetings to identify and evaluate issues and opportunities associated with interfaces in the back end of the fuel cycle (BEFC) and to describe effective management approaches based on the experience of Member States. During the meetings, participants from Member States and other international organizations shared and evaluated the main interfaces and potential interface issues among the spent fuel storage, transport, reprocessing and disposal of the BEFC, and also reviewed the national approaches to addressing these issues. The aim of this publication is to provide an approach to identify the interfaces in the BEFC as well as the potential issues that should be addressed. It also aims at responding to the solutions Member States most often find to be effective and, in some cases, were adjusted or revisited to reach the fixed target. Most of the interfaces and issues are country specific, as evidenced by the variety and diversity of examples provided in this publication

  15. Management of radioactive waste in France-policy, issues, and solutions

    International Nuclear Information System (INIS)

    Tamborini, J.

    1996-01-01

    The French nuclear industry has conducted a study to define a policy and an organization to deal with the waste generated from nuclear power plants, the fuel cycle industries, and medicine, research, and other industrial nuclear applications. This has resulted in the introduction of an organization which, by appropriate and responsible management, can guarantee to protect people and the environment while ensuring industrial effectiveness. The body in charge of waste management in France is the National Radioactive Waste Management Agency (ANDRA) created in 1979. The French policy is based on waste classification and the related solutions for the evacuation of these wastes. High-level and long-lived waste management is regulated by a law passed Dec 30, 1991. The law outlines the research program to be conducted. Three main research objectives are prescribed: 1. reduction of the waste volumes and toxicity (partitioning and transmutation); 2. assessment of the waste isolation properties of deep geologic formations by underground research laboratories; 3. development of solidification processes and storage techniques for long-term interim storage in near-surface facilities. This research will be implemented within a 15 yr period. At present, applications are submitted to the authorities for the construction of underground research laboratories. At the end of this period, reports will be submitted to parliament. It will have to choose among various options. The construction of a deep geologic repository, if this option is chosen, will need the passage of a new law

  16. A Review of Research in Meetings Management: Some Issues and Challenges

    OpenAIRE

    Marijana Sikošek

    2012-01-01

    The aim of the paper is to provide a clear overview of existing research in the field of the meetings industry in international space and to open an academic discussion on the issues of this field in Slovenia. Through the method of literature analysis, we determine the position of the meetings industry in relation to business tourism and leisure tourism, explaining the most frequent definitions of meetings and pointing to the fragmentariness of the meetings industry, recognising it as a speci...

  17. Differing Perceptions Concerning Research Integrity Between Universities and Industry: A Qualitative Study.

    Science.gov (United States)

    Godecharle, Simon; Nemery, Benoit; Dierickx, Kris

    2017-09-14

    Despite the ever increasing collaboration between industry and universities, the previous empirical studies on research integrity and misconduct excluded participants of biomedical industry. Hence, there is a lack of empirical data on how research managers and biomedical researchers active in industry perceive the issues of research integrity and misconduct, and whether or not their perspectives differ from those of researchers and research managers active in universities. If various standards concerning research integrity and misconduct are upheld between industry and universities, this might undermine research collaborations. Therefore we performed a qualitative study by conducting 22 semi-structured interviews in order to investigate and compare the perspectives and attitudes concerning the issues of research integrity and misconduct of research managers and biomedical researchers active in industry and universities. Our study showed clear discrepancies between both groups. Diverse strategies in order to manage research misconduct and to stimulate research integrity were observed. Different definitions of research misconduct were given, indicating that similar actions are judged heterogeneously. There were also differences at an individual level, whether the interviewees were active in industry or universities. Overall, the management of research integrity proves to be a difficult exercise, due to many diverse perspectives on several essential elements connected to research integrity and misconduct. A management policy that is not in line with the vision of the biomedical researchers and research managers is at risk of being inefficient.

  18. Solid industrial wastes and their management in Asegra (Granada, Spain)

    International Nuclear Information System (INIS)

    Casares, M.L.; Ulierte, N.; Mataran, A.; Ramos, A.; Zamorano, M.

    2005-01-01

    ASEGRA is an industrial area in Granada (Spain) with important waste management problems. In order to properly manage and control waste production in industry, one must know the quantity, type, and composition of industrial wastes, as well as the management practices of the companies involved. In our study, questionnaires were used to collect data regarding methods of waste management used in 170 of the 230 businesses in the area of study. The majority of these companies in ASEGRA are small or medium-size, and belong to the service sector, transport, and distribution. This was naturally a conditioning factor in both the type and management of the wastes generated. It was observed that paper and cardboard, plastic, wood, and metals were the most common types of waste, mainly generated from packaging (49% of the total volume), as well as material used in containers and for wrapping products. Serious problems were observed in the management of these wastes. In most cases they were disposed of by dumping, and very rarely did businesses resort to reuse, recycling or valorization. Smaller companies encountered greater difficulties when it came to effective waste management. The most frequent solution for the disposal of wastes in the area was dumping

  19. Viral Management as a New Type of Enterprise Management in Coal Industry

    Science.gov (United States)

    Garafonova, Olga; Grigashkina, Svetlana; Zhosan, Anna

    2017-11-01

    The article considers the evolution of the concept of "management". The Internet analysis of the concept of "viral management" was conducted, the results of which testify to the positive trend, the growing interest in scientific circles, the relevance of the chosen direction for further research and the increasing popularity of the viral management among business leaders. The indices of coal and brown coal extraction in Ukraine and Russia for 2010-2016 are analyzed. Among the problems that exist in the coal industry are the following: mine assets have a high degree of deterioration; the equipment is rather obsolete and does not correspond to the world level; among the existing face equipment, the specific weight of longwall mining equipment, road headers, loading machines, and belt conveyors of the new generation is only several percent. Five steps of introduction of the virus management at the enterprise are identified: opening, development, participation, diffusion, sustainability. The principles of introduction of the viral management in the enterprises of the coal industry are offered. It is established that the main idea of the viral management is to "infect" the organization and, mainly, employees with one or another "virus" in the form of a common idea or goal. It is indicated that the viral management assumes a certain automaticity of changes, internal "obsession" with this or other innovation, involvement of an informal personal factor.

  20. Industrial conflict and its management in selected Nigerian manufacturing companies

    Directory of Open Access Journals (Sweden)

    Solaja Oludele Mayowa

    2015-12-01

    Full Text Available This study examined industrial conflict and its management strategies in selected manufacturing companies in Lagos State, Nigeria. The study utilized co-relational survey method which involves the use of structured questionnaire and personal observation to elicit information from the respondents. Participants comprised of staffs of three manufacturing companies in Lagos, Nigeria. Multistage sampling technique was employed in selecting the respondents from the three manufacturing companies under the study. The data collected were analyzed using descriptive statistic including tables, frequency counts, and percentages as well as mean scores. The findings revealed that the causes of conflict in manufacturing companies in Lagos State, Nigeria include poor means of communicating grievances to top managers, unfavorable economic and industrial policies, poor employee compensation and welfare among others. Therefore, this study concluded that managers should combine strategies such as bargaining, collaboration and avoidance when dealing with industrial conflict to maintain cordial and productive labour-management relationship.

  1. THE RELEVANCE OF MANAGEMENT ACCOUNTING FOR THE HOSPITALITY INDUSTRY

    Directory of Open Access Journals (Sweden)

    Briciu Sorin

    2012-07-01

    Full Text Available In the contemporary period the tourism and hospitality industry has experienced dynamic growth despite the challenges facing not only the global crisis, but also market changes, consumer behavior and technological trends. Accounting, the language of business is required to keep up with changes made to each particular area of activity so that they can provide timely relevant information to be managed by an efficient information system. Our article focuses on presenting the importance of management accounting and cost information system in the hospitality industry, then consider identifying features of this sector and their impact on accounting. The methodology of our research falls within the economic research, being theoretical, aiming primarily to knowledge objectives and the relevance of management accounting for economic entities, and then we have the characteristics of hospitality industry and possible organizational management accounting in this sector. In our perspective cost calculation for services, packages or travel benefits must take into account the development of the accounts from Class 9, so we propose a possible method to customize them according to the Direct Costing and CVP analysis. Our research will also be explanatory descriptive, trying to answer the questions How? and Why?

  2. Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry.

    Science.gov (United States)

    Yoon, Seok J; Lin, Hsing K; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

    2013-12-01

    The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became widely available, were analyzed to understand the effect of OHSMS on the work-related injury rates in the construction industry. The Korea Occupational Safety and Health Agency 18001 is the certification to these companies performing OHSMS in South Korea. The questionnaire was created to analyze the differences of OHSMS awareness between site general managers and OHS managers of construction companies. The implementation of OHSMS among the top 100 construction companies in South Korea shows that the accident rate decreased by 67% and the fatal accident rate decreased by 10.3% during the period from 2006 to 2011. The survey in this study shows different OHSMS awareness levels between site general managers and OHS managers. The differences were motivation for developing OHSMS, external support needed for implementing OHSMS, problems and effectiveness of implementing OHSMS. Both work-related accident and fatal accident rates were found to be significantly reduced by implementing OHSMS in this study. The differences of OHSMS awareness between site general managers and OHS managers were identified through a survey. The effect of these differences on safety and other benefits warrants further research with proper data collection.

  3. Closing unprofitable services: ethical issues and management responses.

    Science.gov (United States)

    Summers, James W

    1985-01-01

    Closing unprofitable services often requires as much analysis, public relations, marketing, and planning as any expansion. Further, issues about ethics, indigents, and the hospital mission force the consideration of values explicitly if a marketing fiasco is to be avoided. By integrating values analysis with more traditional management tasks, the challenges of service closure can be converted into opportunities to demonstrate how your institution has met or exceeded its ethical obligations. A case involving OB is developed to show how ethical and management issues blend into one another. Specific strategies for consensus building and marketing of the legitimacy of the hospital's position are given. Institutional ethics committees are one primary mechanism for developing a plan to benefit from unpleasant decisions.

  4. TOTAL QUALITY MANAGEMENT AND CONTEMPORARY HOTEL INDUSTRY

    OpenAIRE

    Ivica Batinić

    2013-01-01

    Strong competition in the market has caused the development of a new management approach known as Total Quality Management (TQM). Due to importance that quality plays in achieving competitive advantage, the hotel industry started to apply TQM. During the introduction of these systems, hotel companies may use different approaches to suit their own buseiness requirements. In doing so, 'TQM standards' can be used, or various international standards and models of business ...

  5. Quality management in the nuclear industry: the human factor

    International Nuclear Information System (INIS)

    1990-01-01

    In the nuclear industry it is vital to understand the 'human factor' with regard to plant performance and plant safety. A proper management system ensures that personnel perform their duties correctly. 'Quality Management in the Nuclear Industry: the Human Factor', was a conference organized by the Institution of Mechanical Engineers in October 1990. The conference covered a wide range of topics on an international level including: standards, licensing and regulatory procedures; selection assessment and training of personnel; feedback from experience of good practice and of deviations; management and support of personnel performance; modelling and evaluation of human factors. The papers presented at the conference are contained in this volume. All twenty papers are indexed separately. (author)

  6. Future Public Policy and Ethical Issues Facing the Agricultural and Microbial Genomics Sectors of the Biotechnology Industry: A Roundtable Discussion

    Energy Technology Data Exchange (ETDEWEB)

    Diane E. Hoffmann

    2003-09-12

    On September 12, 2003, the University of Maryland School of Law's Intellectual Property and Law & Health Care Programs jointly sponsored and convened a roundtable discussion on the future public policy and ethical issues that will likely face the agricultural and microbial genomics sectors of the biotechnology industry. As this industry has developed over the last two decades, societal concerns have moved from what were often local issues, e.g., the safety of laboratories where scientists conducted recombinant DNA research on transgenic microbes, animals and crops, to more global issues. These newer issues include intellectual property, international trade, risks of genetically engineered foods and microbes, bioterrorism, and marketing and labeling of new products sold worldwide. The fast paced nature of the biotechnology industry and its new developments often mean that legislators, regulators and society, in general, must play ''catch up'' in their efforts to understand the issues, the risks, and even the benefits, that may result from the industry's new ways of conducting research, new products, and novel methods of product marketing and distribution. The goal of the roundtable was to develop a short list of the most significant public policy and ethical issues that will emerge as a result of advances in these sectors of the biotechnology industry over the next five to six years. More concretely, by ''most significant'' the conveners meant the types of issues that would come to the attention of members of Congress or state legislators during this time frame and for which they would be better prepared if they had well researched and timely background information. A concomitant goal was to provide a set of focused issues for academic debate and scholarship so that policy makers, industry leaders and regulators would have the intellectual resources they need to better understand the issues and concerns at stake. The

  7. The coal industry and its greenhouse challenge

    International Nuclear Information System (INIS)

    Armstrong, A.

    1998-01-01

    The Australian coal industry is actively involved in greenhouse gas emission management and abatement issues. An Australian Coal Association (ACA) position paper on greenhouse in November 1989, recommended a number of strategies to minimise the greenhouse effect, including the enhancement of energy utilisation efficiency, improved energy conversion efficiency at coal-fired power stations, expanded use of solar heating, and improved recycling. All of the strategies have been implemented to various degrees. The management and abatement of greenhouse gas emissions within the coal industry has been approached from an individual operational level, and a 'higher' industry level

  8. IMPLEMENTATION OF PROPERTY MANAGEMENT SYSTEM IN HOTEL INDUSTRY

    OpenAIRE

    Krželj-Čolović, Zorica; Cerović, Zdenko

    2013-01-01

    Information and Communication Technologies (ICT) influences the development tourism on globally, and its development has changed the practice of business. Any reference ICT in the hotel industry necessarily begins the concept of Property Management System (PMS). PMS as an essential component for hotel management provides tools as are necessary hotel staff in performing daily operations of the reservation, the accommodation capacities management, accounting, etc. This software supports all bas...

  9. Issues on management, stabilization and environmental impacts of uranium mill tailings

    International Nuclear Information System (INIS)

    Cunningham, R.E.

    1978-01-01

    Management and stabilization of uranium mill tailings has been controversial for over two decades. There are two basic issues: the nature of the risk to the public from tailings and what must be done to mitigate that risk. This paper provides an overview of the issues and sets some goals to be accomplished at the 1978 NEA Seminar on Management, Stabilization and Environmental Impacts of Uranium Mill Tailings that could be helpful in resolving the issues

  10. SOME ISSUES OF THE AIRPORT MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Marian Ovidiu

    2012-07-01

    Full Text Available Internationally, the recommended standards for the operation and management of civil-use airports are provided by the International Civil Aviation Organization (ICAO. In most individual countries, airports are managed directly by the government, most often under the ministry of transport. In some countries, including EU countries, some airports are privately owned and operated, although, despite private ownership, they are still subject to much of the country’s regulations regarding aviation operations. The complex system of civil airports is made up of individual airport facilities of varying sizes, serving various purposes, all organized into plans of regional, national, and international levels. The range of rules, regulations, and policies, administered from varying levels of government, cover the full spectrum of airport and aviation system operations. Furthermore, a large number of professional and industry organizations play a large part in influencing the policies by which airport management must operate their facilities. By understanding where an airport manager’s airport falls within the civil aviation system, what rules must be followed, and what sources of support and assistance exist, the task of efficiently managing the complex system that is an airport, becomes highly facilitated.

  11. Business process of reputation management of food industry enterprises

    OpenAIRE

    Derevianko Olena. H.

    2014-01-01

    The goal of the article is development of the methodical base of reputation management directed at formalisation of theoretical provisions and explanation how to organise reputation management at food industry enterprises. The article shows prospectiveness of use of the Business Process Management concept in reputation management. Using the diagram of the Reputation Management business process environment the article shows its key participants (suppliers and clients of the business process) a...

  12. Resolving traceability issues of product derivation for software product lines

    OpenAIRE

    Abid, Saad bin

    2009-01-01

    peer-reviewed Dealing with traceability management issues during model based product derivation in large complex industrial SPL is error prone due to the lack of tool support. As a result traceability management between connected models emerges as an important research topic. In this position paper, we discuss research challenges as scenarios from developed example product line and give recommendations on resolving traceability issues during product derivation. We also discuss initial idea...

  13. Evaluation of corporate energy management practices of energy intensive industries in Turkey

    International Nuclear Information System (INIS)

    Ates, Seyithan Ahmet; Durakbasa, Numan M.

    2012-01-01

    Turkey is one of a number of countries who still lack a national management standard for energy. Industrial energy consumption accounts for 42% of Turkey's total energy consumption. With the help of a questionnaire and analytical framework, this paper investigates Industrial Energy Management Practice in Turkey and highlights significant bottlenecks and shortcomings of energy intensive industries in terms of energy management application. The survey was carried out as a multiple case study of the Turkish iron, steel, cement, paper, ceramics and textile industries. Outcomes of the questionnaire are evaluated according to the analytical framework which covers company characteristics, regulations, external relations of the companies and internal organizational conditions. After analyzing these elements on the basis of a minimum requirement list, it was found that only 22% of the surveyed companies actually practice corporate energy management in Turkey. The main barriers to proper energy management implementation were identified as lack of synergy between the stakeholders, the extent and scope of energy manager courses, and inadequate awareness of and lack of financial support for energy management activities. As a guideline to overcome present obstacles, a set of policy options are offered: strengthening and restructuring of legal and institutional frameworks, promotion of energy efficiency, education, training and capacity building and facilitating implementation of the international energy management standard ISO 50001. -- Highlights: ► Developing an analytical scheme to assess degree of Energy Management Application. ► Investigation of Energy Management Practices in Turkish Energy Intensive Industries. ► Analysis of challenges which hinder full implementation of energy management in Turkey. ► Presenting a set of essential policy options thought for all stakeholders.

  14. The Zodiak workshop: an innovative model for teaching financial management through partnership with industry.

    Science.gov (United States)

    Lloyd, James W; Frawley, Suzanne L; Neer, Charles A; Merle, Christine; Goebel, Richard

    2004-01-01

    The National Commission on Veterinary Economic Issues (NCVEI) is working to enhance the non-technical skills, knowledge, aptitudes, and attitudes (SKAs) of veterinarians. This report describes the development of an innovative model for teaching the principles of financial management as they apply to the veterinary practice. Zodiak: The Game of Business Finance and Strategy is a "business literacy" game in which players work together in small teams (generally four people) to run a fictional multi-million-dollar company called Zodiak Industries for three "years" in order to learn principles of business finance and strategy. After finishing the 4.5-hour game, participants spend the rest of the workshop making the right "Connections"-exercises designed to connect what they have learned to business strategies, financial statements, and operational tactics drawn from veterinary practice. Issues addressed for the veterinary practice, with parallels drawn to Zodiak, included return on owner investment in a veterinary practice (vs. salary drawn by owner veterinarians); pricing (setting prices, price elasticity of demand, and relationships between volume, quality, and price); human resources and operations management as they relate to profitability and efficiency; cash flow and management of accounts receivable; and commonly used financial benchmarks. Workshop venues have included Michigan State University, The Ohio State University, the University of Illinois, and Purdue University. Financial and in-kind support were provided through partnership with Pharmacia Animal Health (now Pfizer Animal Health) and Hill's Pet Nutrition, Inc. Through course evaluations, participants generally rated the workshop high as an educational experience and indicated that the most important things learned were related to financial management (principles, terminology, and methods). The most enjoyable aspects of the workshop tended to be group discussions, teamwork, the dynamic

  15. Implementation of the Environmental Management Concept in the Hospitality Industry

    Directory of Open Access Journals (Sweden)

    Manuela Dora Orboi

    2015-10-01

    Full Text Available Globally, the concern for the environment is continually growing, among travel and tourism industry operators. Each unit hotel has its identity, its characteristics, and therefore, it is necessary to use and apply specific information about the environment, so as to create their own proactive environment protection policies. It must be performed an overview of environmental issues affecting the company and the performance that it has. Each unit hotel policy must be based on actual consumer demand for tourist services - as an active and conscious part - along with unit staff. Environmental action planning of a hotel unit has to go through several stages. The preparation of environmental actions of a hotel unit, involves biological control, which should help in making decisions on the most important measures that would benefit. Implementing the concept of environmental management in the hospitality unit requires including and taking the following steps: motivation, actions planning, analyze their performance and progress. They form an annual cycle of environmental management, which will go each year, to identify both the difficulties that have arisen and achievements and recommendations for the future.

  16. A Knowledge Management Model for Firms in the Financial Services Industry

    Science.gov (United States)

    Held, Carsten; Duncan, Glen; Yanamandram, Venkat

    2013-01-01

    The financial services industry faces many demanding challenges. Firms within this industry are predominantly knowledge-based, as are most of the industry's products, processes and services. The application of knowledge management represents a clear opportunity for financial services firms to confront challenges. However, no industry specific…

  17. Industrial and institutional restructuring of the Russian electricity sector: Status and issues

    International Nuclear Information System (INIS)

    Engoian, Alda

    2006-01-01

    The reform of the Russian electricity industry represents one of the largest and most technically complex post-Soviet era industrial restructurings. This paper presents the framework, status, and perspectives for the Russian electricity sector liberalisation. Uncertainties regarding the effective implementation of the reform are specifically examined. Ultimately the critical analysis of the reform questions the feasibility and adequacy of the recommended measures in the specific Russian context. Current theories fail to answer a fundamental issue, namely how to promote investment in an obsolete electrical infrastructure and, more generally, whether a pure free market model is compatible with physical constraints posed by the electricity sector. A careless deregulation of the Russian electricity system could hinder the country's stable and sustainable development, as its economy and the population's service have traditionally been closely linked to the electricity industry

  18. Industrial and institutional restructuring of the Russian electricity sector: status and issues

    International Nuclear Information System (INIS)

    Engoian, A.

    2006-01-01

    The reform of the Russian electricity industry represents one of the largest and most technically complex post-Soviet era industrial restructurings. This paper presents the framework, status, and perspectives for the Russian electricity sector liberalisation. Uncertainties regarding the effective implementation of the reform are specifically examined. Ultimately the critical analysis of the reform questions the feasibility and adequacy of the recommended measures in the specific Russian context. Current theories fail to answer a fundamental issue, namely how to promote investment in an obsolete electrical infrastructure and, more generally, whether a pure free market model is compatible with physical constraints posed by the electricity sector. A careless deregulation of the Russian electricity system could hinder the country's stable and sustainable development, as its economy and the population's service have traditionally been closely linked to the electricity industry. (author)

  19. Databases in the documentation management for big industrial projects

    International Nuclear Information System (INIS)

    Cauchet, A.; Chevillard, F.; Parisot, Y.; Tirefort, C.

    1990-05-01

    The documentation management of a big industrial project involves a continuous update of information, both in the study and realization phase or in the operation phase. The organization of the technical documentation for big industrial projects requests complex information systems. In the first part of this paper are presented the methods appropriate for the analysis of documentation management procedures and in the second part are presented the tools by the combination of which a documentation system for the user is provided. The case of the documentation centres for the Hague reprocessing plant is described

  20. Managing innovation: lessons from the cardiac-pacing industry.

    Science.gov (United States)

    Gobeli, D H; Rudelius, W

    1985-01-01

    In this article, the authors argue that innovation is a surefire way for a firm to increase its sales and market share. This, in turn, can stimulate American industries and make American firms more competitive in international markets. Through their study of the cardiac-pacing industry, they draw conclusions about what factors contribute to a successful innovation in other industries besides medical electronics. They identify general patterns and stages of the innovation process, key roles top management must fill in an organization, and effective policies that foster important innovations.

  1. Clean energy industries and rare earth materials: Economic and financial issues

    International Nuclear Information System (INIS)

    Baldi, Lucia; Peri, Massimo; Vandone, Daniela

    2014-01-01

    In the last few years, rare earth materials (REM) prices have experienced a strong increase due to geopolitical and sustainability issues. Financial markets could already have factored in concerns about shortages of REM supplies into clean energy companies’ valuations. We use a multifactor market model for the period January 2006 to September 2012 to analyze the impact of REM price trends – specifically dysprosium and neodymium – on six clean energy indices (NYSE–BNEF) tracking the world's most important companies in the clean energy sector. The results show that during period of price increase, there is a negative relationships between REM price changes and the stock market performance of some clean energy indices. The European clean energy index is also negatively affected, and this effect could be relevant to policy makers, considering that Europe is implementing some relevant policy actions to support the development of the clean energy industry. - Highlights: • Clean energy is an industry with a double-digit growth market rate in the last years. • Rare earth materials are a key component in the development process of this industry. • Recently REMs’ prices have skyrocketed and the clean energy industry is in turmoil. • We analyze the effect of REMs price on the stock market performances of clean industry. • We find negative relation between REMs price increase and stock market performances

  2. Managers air thoughts on the top competitive issues

    International Nuclear Information System (INIS)

    Makansi, J.; Swanekamp, R.

    1996-01-01

    Over 100 powerplant managers and representatives from other industry segments exchanged ideas and opinions at Power magazine's Fifth Powerplant O and M Symposium, ''Managing the Powerplant in a Competitive Environment,'' held June 12--14 in Richmond, VA. Attendees may have represented both utility and independent power facilities, but it was clear from the dialogue that, regardless of ownership, most felt that their plants would have to operate as independent businesses, implicitly if not directly

  3. Regulatory issues for nuclear power plant life management

    International Nuclear Information System (INIS)

    Roe, J.

    2000-01-01

    The workshop of 26-27 june 2000, on nuclear power Plant LIfe Management (PLIM), also included working groups in which major issues facing PLIM activities for nuclear power plants were identified and discussed. The second group was on Regulation. The Regulatory Working Group will attempt to identify some of the more pertinent issues affecting nuclear plant regulation in a changing PLIM environment, to identify some possible actions to be taken to address these issues, and to identify some of the parties responsible for taking these actions. Some preliminary regulatory issues are noted below. This is not intended to be a comprehensive list of such issues but rather is intended to stimulate discussion among the experts attending this Workshop. One of the concerns in the regulatory arena is how the structural integrity of the plants can be assured for an extended lifetime. Technological advances directed toward the following are likely to be important factors in the regulatory process of life extension. - Preventive and corrective maintenance (e.g., water chemistry control, pressure vessel annealing, and replacement of core internals). - Ageing and degradation mechanisms and evaluation (e.g., embrittlement, wear, corrosion/erosion, fatigue, and stress corrosion). - Monitoring, surveillance, and inspection (e.g., fatigue monitoring and non-destructive testing). - Optimisation of maintenance (e.g., using risk-based analysis). On the business side, there is concern about technical support by manufacturers, fuel companies, and construction companies. Maintaining a strong technical base and skilled workers in a potentially declining environment is another concern in the regulatory community. Waste management and decommissioning remain significant issue regarding PLIM. These issues affect all three areas of concern - technology, business, and regulation. It is against this background, that the issues put forth in this paper are presented. The objective of presenting these

  4. Managing radioactive waste issues and misunderstandings (radiation realities, energy comparison, waste strategies)

    International Nuclear Information System (INIS)

    Rosen, M.

    2001-01-01

    The technical specialist is confident that radioactive waste can be safely managed, but many in the public remain totally unconvinced. There are issues and deep-seated misunderstandings that drive public doubts. Currently, a growing concern with pollution from other industrial waste is enabling radioactive waste issues to be debated in a wider context that allows comparisons with other potentially hazardous waste, particularly from energy generation sources. Health effects and time period issues are not unique to radioactive waste. This paper concentrates on 3 topics. The first concerns radiation health effects where the real realities of radiation are covered. The large misunderstandings that exist about radiation and its health effects have led to an almost zero health impact regulatory policy. A policy which must be more fully understood and dealt with. The second topic deals with a few revealing comparisons about the various energy generation systems. Nuclear power's 10 thousand fold lower fuel requirements, compared with a comparable fossil fuelled plant, is a dominating factor decisively minimising environmental impacts. The third topic examines waste disposal strategies. Extraordinarily small radioactive waste quantities permit a confinement strategy for disposal as opposed to the more common dispersion strategy for most toxic waste. The small quantities coupled with radioactive decay, contrary to the public perception, make any potential hazard from both low and high level radioactive waste exceedingly small. (author)

  5. INTRODUCTION TO MANAGEMENT FOR INDUSTRIAL SUPERVISORS.

    Science.gov (United States)

    Louisiana State Vocational Curriculum Development and Research Center, Natchitoches.

    SUBJECT MATTER AND SUPPLEMENTAL MATERIALS FOR USE IN CONDUCTING A 10-HOUR INDUSTRIAL SUPERVISORY TRAINING CONFERENCE IN BASIC MANAGEMENT FUNDAMENTALS AND CONCEPTS ARE PRESENTED IN THIS TEACHER GUIDE. IT WAS DEVELOPED BY A STATE COMMITTEE AS A FIRST COURSE IN A SERIES FOR SUPERVISORY PERSONNEL WHO HAVE HAD LITTLE OR NO PREVIOUS SUPERVISORY TRAINING…

  6. Experimental modeling methods in Industrial Engineering

    Directory of Open Access Journals (Sweden)

    Peter Trebuňa

    2009-03-01

    Full Text Available Dynamic approaches to a management system of the present industrial practice, forcing businesses to address management issues in-house continuous improvement of production and non-production processes. Experience has repeatedly demonstrated the need for a system approach not only in analysis but also in the planning and actual implementation of these processes. Therefore, the contribution is focused on the description of the modeling in industrial practice by a system approach, in order to avoid erroneous application of the decision to the implementation phase, and thus prevent any longer applying methods "attempt - fallacy".

  7. Positioning and Priorities of Growth Management in Construction Industrialization: Chinese Firm-Level Empirical Research

    Directory of Open Access Journals (Sweden)

    Jingxiao Zhang

    2017-06-01

    Full Text Available The purpose of this research is to quantitatively evaluate the growth phase, position, and priorities of the industrialization policy management of the construction industry at firm level. The goal is to integrate quantitative dynamics into the policy-making process for sustainable policy development in future China. This research proposes an integrated framework, including growth management model and industrial policy evaluation method, to identify the challenges of construction industrialization and policy management. The research applies the mixed system method, which includes entropy method and average score method, to analyze the growth stage and major impact indexes targeting 327 survey samples. The empirical results show that the proposed conceptual framework and policy evaluation method could effectively determine the growth position and directions of the construction industrialization. For verification purpose, the study uses the local industry data from Shaanxi Province, China. The calculation results substantiate that the construction industry is in the middle section of the third growth phase. The comparison of the results from statistical methods shows that the local construction industry still needs substantial effort in policy management to improve its sustainable industrialization level. As countermeasures, the policy priorities should concentrate on: (1 enhancing effective cooperation among universities, research institutions and enterprises; (2 improving actions towards technology transfer into productivity; and (3 encouraging market acceptance of construction industrialization. This research complements the existing literature of policy evaluation of construction industrialization. Moreover, it provides theoretical and operational steps on industry policy evaluation and growth management framework, with accurate and ample data analysis on firm-level survey. Researchers and policy makers can use this research for further

  8. Calculating utility prudency issue costs

    International Nuclear Information System (INIS)

    Nielsen, K.R.

    1985-01-01

    The nuclear industry, particularly utilities and their construction, engineering and vendor agents, is faced with a surging increase in prudency management audits. What started as primarily a nuclear project-oriented requirement has spread to encompass most significant utility capital construction projects. Such audits are often a precedent condition to commencement of rate hearings. The cost engineer, a primary major capital construction project participant, is required to develop or critique ''prudency issue'' costs as part of such audits. Although utility costs in the broadest sense are potentially at issue, this paper concentrates on the typical project/construction management costs. The costs of design, procurement and construction are all subject to the calculation process

  9. Research and technology management in the electricity industry methods, tools and case studies

    CERN Document Server

    Daim, Tugrul; Kim, Jisun

    2013-01-01

    Technologies such as renewable energy alternatives including wind, solar and biomass, storage technologies and electric engines are creating a different landscape for the  electricity industry. Using sources and ideas from technologies such as renewable energy alternatives, Research and Technology Management in the Electricity Industry explores a different landscape for this industry and applies it to the electric industry supported by real industry cases. Divided into three sections, Research and Technology Management in the Electricity Industry introduces a range of  methods and tools includ

  10. ENVIRONMENT DEGRADATION BASIS FOR INDUSTRIAL SYSTEMS RENGINEERING

    Directory of Open Access Journals (Sweden)

    Rade Milićević

    2007-06-01

    Full Text Available Presently, the most environmental pressure in Serbia comes from urban areas and associated industries,with collection, treatment and disposal all kinds of hazardous waste, non hazardous waste, and waste water being among the most challenging issues.There is an urgency to prevent further environmental degradation and to initiate new environmental and industrial management practices. Industrial systems reingeneering is one of possible solutions, from the authors stand point.

  11. Inventory management systems : Control and information issues

    NARCIS (Netherlands)

    Janssen, F.B.S.L.P.

    1998-01-01

    This dissertation addresses the management of inventory systems. The thesis starts with an exposition on mathematical models that can be used in inventory theory. Then we deal with some information issues related to the demand process. Namely, how to control products that have intermittent demand.

  12. Managing nuclear wastes: an overview of the issues

    International Nuclear Information System (INIS)

    Cummings, R.G.; Utton, A.E.

    1981-01-01

    The issues involving nuclear waste management are reviewed. The author points out the need for a critical overview of research priorities concerning nuclear waste management (NWM), and he discusses the uncertainties surrounding the scope of the problem (i.e., the controversy concerning the extent of dangers to public health and safety associated with the transport and storage of nuclear wastes). This article, intended as a introdution to the other nuclear waste management papers in the journal, also briefly discusses the papers

  13. Characteristics and management of infectious industrial waste in Taiwan

    International Nuclear Information System (INIS)

    Huang, M.-C.; Lin, Jim Juimin

    2008-01-01

    Infectious industrial waste management in Taiwan is based on the specific waste production unit. In other countries, management is based simply on whether the producer may lead to infectious disease. Thus, Taiwan has a more detailed classification of infectious waste. The advantage of this classification is that it is easy to identify the sources, while the disadvantage lies in the fact that it is not flexible and hence increases cost. This study presents an overview of current management practices for handling infectious industrial waste in Taiwan, and addresses the current waste disposal methods. The number of small clinics in Taiwan increased from 18,183 to 18,877 between 2003 and 2005. Analysis of the data between 2003 and 2005 showed that the majority of medical waste was general industrial waste, which accounted for 76.9%-79.4% of total medical waste. Infectious industrial waste accounted for 19.3%-21.9% of total medical waste. After the SARS event in Taiwan, the amount of infectious waste reached 19,350 tons in 2004, an increase over the previous year of 4000 tons. Waste minimization was a common consideration for all types of waste treatment. In this study, we summarize the percentage of plastic waste in flammable infectious industrial waste generated by medical units, which, in Taiwan was about 30%. The EPA and Taiwan Department of Health have actively promoted different recycling and waste reduction measures. However, the wide adoption of disposable materials made recycling and waste reduction difficult for some hospitals. It has been suggested that enhancing the education of and promoting communication between medical units and recycling industries must be implemented to prevent recyclable waste from entering the incinerator

  14. Essays in industrial organization and management strategy

    NARCIS (Netherlands)

    de Bijl, P.W.J.

    1996-01-01

    This thesis contains five essays in the theory of industrial organization and management strategy. An introduction makes the main ideas accessible to non-specialists by presenting the essays as fictitious cases. The first essay investigates strategic disclosure of verifiable information. The

  15. Nuclear industry strategic asset management: Managing nuclear assets in a competitive environment

    International Nuclear Information System (INIS)

    Mueller, H.; Hunt, E.W. Jr.; Oatman, E.N.

    1999-01-01

    The former Electric Power Research Institute took the lead in developing an approach now widely known as strategic asset management (SAM). The SAM methodology applies the tools of decision/risk analysis used in the financial community to clarify effective use of physical assets and resources to create value: to build a clear line of sight to value creation. SAM processes have been used in both the power and other industries. The rapid change taking place in the nuclear business creates the need for competitive decision making regarding the management of nuclear assets. The nuclear industry is moving into an era in which shareholder value is determined by the net revenues earned on power marketed in a highly competitive and frequently low-priced power market environment

  16. Improvement of industrial efficiency by knowledge management in maintenance engineering

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Mariotoni

    2015-09-01

    Full Text Available This article shows research and studies dealing with the management of knowledge in industrial maintenance engineering, developed in the field of applied research in real industrial companies of Europe, which are the consequences of  having knowledge on islands, as well as measures improvements when there is an adequate knowledge management. The peculiarities which are given in the maintenance of the company departments, knowledge of operators and technicians operating in these areas, is heavily based on their experiences (strong tacit component, what is difficult to measure and articulate, and however, on numerous occasions, this break from the knowledge, can impose a high cost for the industry.

  17. The international emergency management society conference 1997. National and international issues concerning research and applications

    International Nuclear Information System (INIS)

    Andersen, V.; Hansen, V.

    1997-01-01

    The International Emergency Management Society (TIEMS) is a non-profit organisation that aims to bring together users, planners, researchers, managers, technicians, response personell, and other interested emergency management parties to learn, teach, and exchange experience, knowledge, and ideas about how information management tools can be used to avoid, mitigate, and recover from disasters and other emergencies; and consequently, how the use of information management methods and technologies may improve efficiency in emergency management. TIEMS'97 is the fourth conference in the sequence of conferences. The conferences emphasise the major goal of TIEMS: to bring together people with diverse backgrounds but who share a dedication to improve emergency management. In the discussions, formal and informal, at the conferences, nuclear scientists listen to psychologists, sociologists share ideas with engineers, and practitioners discuss emergency management issues with scientists. In recent years we have experienced a tremendous advancement in information and communication technologies and, consequently, increased the possibilities in coping with emergency situations. At the same time the management of emergency situations has typically become more complex due to the increased complexity of industrial plants which are often the sources of manmade catastrophes. Besides the aspects normally covered in the TIEMS conferences, such as decision support, modelling, handling of man-made or natural disasters, training, etc., this conference has been enhanced by including aspects involving medical car and economic constraints. (EG)

  18. Clean Energy Industries and rare Earth Materials: Economic and Financial Issues

    OpenAIRE

    Baldi, Lucia; Peri, Massimo; Vandone, Daniela

    2013-01-01

    In the last few years Rare Earth Materials (REMs) prices have experienced a strong increase, due to geopolitical policies and sustainability issues. Provided that these materials at risk of supply disruptions are largely employed in the development of new technologies - such as clean energy industries - financial markets may already have included these concerns into clean energy companies evaluation. We use a multifactor market model for the period January 2006-September 2012 to analyse the i...

  19. Special issue: Logistics systems design in Latin America

    Directory of Open Access Journals (Sweden)

    Miguel Gaston Cedillo Campos

    2017-10-01

    Under this context, this Special Issue of the Journal of Industrial Engineering and Management (JIEM gathers nine significant contributions, which from a Latin American approach, enhance the logistics systems body of knowledge focused on emerging markets.

  20. Issues for the long term management of radioactive waste

    International Nuclear Information System (INIS)

    Schneider, T.; Schieber, C.; Lavelle, S.

    2006-01-01

    High-level radioactive waste are currently managed in interim storage installations, providing an adequate protection of the public and the workers for the short term period. However, the long-term persistence of the radioactivity of the waste gives a new timescale dimension, never experimented by the society for the development of protection systems. In the framework of the European Commission research project 'COWAM-2' (COmmunity WAste Management) dedicated to the governance of radioactive waste management, the issues of 'long term governance' have been addressed by exploring the elements which can contribute to a better integration of the technical and societal time dimensions, taking into account technical, ethical, economic and organizational considerations. The originality of this project is to address the various issues within working groups involving stakeholders from different origins and European countries together with a research team. After a discussion on the time dimensions to be taken into account from the technical and societal perspective, this paper presents, mainly based on the findings of the COWAM-2 project, a brief analysis of the ethical criteria to be considered when future generations are concerned as well as some performance criteria regarding long term governance. Finally, it proposes a discussion on the interest for the radiation protection experts to engage a process with stakeholders concerned by radioactive waste management in order to favour the emergence of a sustainable management responding to the issues at stake and including radiation protection considerations for long term periods. (authors)

  1. Business process of reputation management of food industry enterprises

    Directory of Open Access Journals (Sweden)

    Derevianko Olena. H.

    2014-01-01

    Full Text Available The goal of the article is development of the methodical base of reputation management directed at formalisation of theoretical provisions and explanation how to organise reputation management at food industry enterprises. The article shows prospectiveness of use of the Business Process Management concept in reputation management. Using the diagram of the Reputation Management business process environment the article shows its key participants (suppliers and clients of the business process and identifies their place in formation of the enterprise reputation. It also shows that the reputation management should be considered a business process of the highest level of management. Construction of the flow structure of the Reputation Management business process allows uncovering the logic of interrelation of inlets and outlets within the framework of the specified main stages of the business process: assessment of the current state of reputation, collection of information about stakeholders, identification of PR strategy goals, planning of necessary resources, realisation of the PR strategy, assessment of efficiency and process monitoring. The article offers the flow, functional and organisational structures of the Reputation Management business process for food industry enterprises. Moreover, justification of functional and organisational structures of the Reputation Management business process gives a possibility to distribute functions of reputation management between specific executors and establish responsibility for each stage of the business process.

  2. Carrying out Credit Management of the Pesticide Industry Well to Improve the Prestige The speech abstract of Luo Haizhang on pesticide industry conference

    Institute of Scientific and Technical Information of China (English)

    Luo Haizhang

    2007-01-01

    @@ The foundation and development of society credit management system is the requirement of market economy. Now more and more groups know the importance of industry credit management and enterprise credit management. Pesticide industry credit management can be done well by our common efforts.

  3. Innovative quality management practices in the Dutch construction industry

    NARCIS (Netherlands)

    Bossink, B.A.G.

    2002-01-01

    Quality management practices do support the management of strategically important innoυation processes. This conclusion is based on empirical research in the Dutch construction industry. A large-scale innovative construction project is intensively studied during a three-year period. The quality

  4. Integrated project-management information systems: the French nuclear industry experience

    Energy Technology Data Exchange (ETDEWEB)

    Jacquin, J.C.; Capuin, G.M.

    1988-01-01

    In the early eighties, and in the French case from 1985, the development of the data-processing industry has made the real integration of project-management information systems feasible, and the data-base administration function has been extended to all facets of the engineering process. The new systems had to take into account the existing ones which were still operating efficiently and the new problems encountered due to the changes in the environment. One of these new problems was equipment and materials management, as the period of plants built in series had vanished, and the industry was obliged to build plants individually. The challenge encountered by the French nuclear industry in terms of the project-management information systems was to adapt efficiently to the new situation, and the purpose of this paper is to describe the most-significant elements of this adaptation. The authors review: (2) the objectives established by the company's general management; (2) the organization put into place to reach these objectives; (3) the main choices made; and (4) the economics. 3 references, 1 figure, 1 table.

  5. Integrated project-management information systems: the French nuclear industry experience

    International Nuclear Information System (INIS)

    Jacquin, J.C.; Capuin, G.M.

    1988-01-01

    In the early eighties, and in the French case from 1985, the development of the data-processing industry has made the real integration of project-management information systems feasible, and the data-base administration function has been extended to all facets of the engineering process. The new systems had to take into account the existing ones which were still operating efficiently and the new problems encountered due to the changes in the environment. One of these new problems was equipment and materials management, as the period of plants built in series had vanished, and the industry was obliged to build plants individually. The challenge encountered by the French nuclear industry in terms of the project-management information systems was to adapt efficiently to the new situation, and the purpose of this paper is to describe the most-significant elements of this adaptation. The authors review: (2) the objectives established by the company's general management; (2) the organization put into place to reach these objectives; (3) the main choices made; and (4) the economics. 3 references, 1 figure, 1 table

  6. BIM: enabling sustainability and asset management through knowledge management.

    Science.gov (United States)

    Kivits, Robbert Anton; Furneaux, Craig

    2013-11-10

    Building Information Modeling (BIM) is the use of virtual building information models to develop building design solutions and design documentation and to analyse construction processes. Recent advances in IT have enabled advanced knowledge management, which in turn facilitates sustainability and improves asset management in the civil construction industry. There are several important qualifiers and some disadvantages of the current suite of technologies. This paper outlines the benefits, enablers, and barriers associated with BIM and makes suggestions about how these issues may be addressed. The paper highlights the advantages of BIM, particularly the increased utility and speed, enhanced fault finding in all construction phases, and enhanced collaborations and visualisation of data. The paper additionally identifies a range of issues concerning the implementation of BIM as follows: IP, liability, risks, and contracts and the authenticity of users. Implementing BIM requires investment in new technology, skills training, and development of new ways of collaboration and Trade Practices concerns. However, when these challenges are overcome, BIM as a new information technology promises a new level of collaborative engineering knowledge management, designed to facilitate sustainability and asset management issues in design, construction, asset management practices, and eventually decommissioning for the civil engineering industry.

  7. EFFECTIVE RISK MANAGEMENT IN MODERN INDUSTRIAL ...

    African Journals Online (AJOL)

    post-modern organizations the importance of perceiving and treating issues ... destruction of the structures and massive loss of lives and property. ... by the management, workers are recruited based on their technical qualification ... necessary for adequate operation of machines or existence of strict rules that the workers.

  8. NORM management in the oil and gas industry

    International Nuclear Information System (INIS)

    Cowie, Michael; Mously, Khalid; Fageeha, Osama; Nassar, Rafat

    2008-01-01

    It has been established that Naturally Occurring Radioactive Materials (NORM) may accumulate at various locations along the oil/gas production process. Components such as wellheads, separation vessels, pumps, and other processing equipment can become NORM contaminated, and NORM can accumulate in the form of sludge, scale, scrapings and other waste media. This can create a potential radiation hazard to workers, general public and the environment if certain controls are not established. Saudi Aramco has developed NORM management guidelines and is implementing a comprehensive strategy to address all aspects of NORM management which aim towards enhancing: NORM monitoring; Control of NORM contaminated equipment; Control over NORM waste handling and disposal; Workers protection, awareness, and training. The benefits of shared knowledge, best practice and, experience across the oil and gas industry are seen as key to the establishment of common guidance. This paper outlines Saudi Aramco's experience in the development of a NORM management strategy and its goals of establishing common guidance throughout the oil and gas industry. (author)

  9. Book Review: Current Issues in International Human Resource Management and Strategy Research

    DEFF Research Database (Denmark)

    Gretzinger, Susanne

    2009-01-01

    The article reviews the book "Current Issues in International Human Resource Management and Strategy Research," edited by Marion Festing and Susanne Royer.......The article reviews the book "Current Issues in International Human Resource Management and Strategy Research," edited by Marion Festing and Susanne Royer....

  10. management practices in the ghanaian house building industry

    African Journals Online (AJOL)

    User

    Building and Road Research Institute, Centre for Scientific and Industrial Research,. Fumuesua ... expected production target amidst an acute .... the responsibility for the management of design .... substitutes already being manufactured since.

  11. Milestones of mathematical model for business process management related to cost estimate documentation in petroleum industry

    Science.gov (United States)

    Khamidullin, R. I.

    2018-05-01

    The paper is devoted to milestones of the optimal mathematical model for a business process related to cost estimate documentation compiled during construction and reconstruction of oil and gas facilities. It describes the study and analysis of fundamental issues in petroleum industry, which are caused by economic instability and deterioration of a business strategy. Business process management is presented as business process modeling aimed at the improvement of the studied business process, namely main criteria of optimization and recommendations for the improvement of the above-mentioned business model.

  12. Manual control models of industrial management

    Science.gov (United States)

    Crossman, E. R. F. W.

    1972-01-01

    The industrial engineer is often required to design and implement control systems and organization for manufacturing and service facilities, to optimize quality, delivery, and yield, and minimize cost. Despite progress in computer science most such systems still employ human operators and managers as real-time control elements. Manual control theory should therefore be applicable to at least some aspects of industrial system design and operations. Formulation of adequate model structures is an essential prerequisite to progress in this area; since real-world production systems invariably include multilevel and multiloop control, and are implemented by timeshared human effort. A modular structure incorporating certain new types of functional element, has been developed. This forms the basis for analysis of an industrial process operation. In this case it appears that managerial controllers operate in a discrete predictive mode based on fast time modelling, with sampling interval related to plant dynamics. Successive aggregation causes reduced response bandwidth and hence increased sampling interval as a function of level.

  13. Quality Management, Environmental Management and Organizational Design in the Hotel Industry: A Qualitative Study

    OpenAIRE

    Tarí, Juan-José; Molina-Azorín, José F.; López-Gamero, María D.; Pereira-Moliner, Jorge; Pertusa-Ortega, Eva

    2014-01-01

    The purpose of this paper is twofold. First, the paper analyzes the relationship between quality management and environmental management and their effects on hotel performance. Second, the article examines the relationship between these two management systems and organizational design. The paper uses an exploratory, qualitative approach based on interviews with managers and experts in the hotel industry. Based on a content analysis of interviews, the results lead to several propositions. Spec...

  14. IoT-based Asset Management System for Healthcare-related Industries

    Directory of Open Access Journals (Sweden)

    Lee Carman Ka Man

    2015-11-01

    Full Text Available The healthcare industry has been focusing efforts on optimizing inventory management procedures through the incorporation of Information and Communication Technology, in the form of tracking devices and data mining, to establish ideal inventory models. In this paper, a roadmap is developed towards a technological assessment of the Internet of Things (IoT in the healthcare industry, 2010–2020. According to the roadmap, an IoT-based healthcare asset management system (IoT-HAMS is proposed and developed based on Artificial Neural Network (ANN and Fuzzy Logic (FL, incorporating IoT technologies for asset management to optimize the supply of resources.

  15. Nuclear energy technology innovation and restructuring electric power industry for sustainable development in Korea in 21st century - issues and strategies

    International Nuclear Information System (INIS)

    Lee, B.W.; Chae, K.N.

    2001-01-01

    After TMI and Chernobyl accidents, concerns on nuclear safety and radiation health risk from radioactive wastes become the target issues for anti-nuclear. Nevertheless, nuclear power is a substantial contributor to the world electricity production, supplying more than 16 % of global electricity. The objectives of Korean nuclear energy technology innovation are to improve safety, economic competitiveness, energy security and the effectiveness of radioactive waste management in harmony with environment. Meeting such objectives, public concerns on safety and health risks would be cleared. Innovative nuclear energy system will certainly enhance socio-political acceptance and enable wider application of nuclear energy for sustainable development in Korea in the 21st Century. In parallel to such technology innovations, the effective first phase restructuring of electric power industry is in progress to enhance management efficiency and customer services. The power generation division of the former state-run utility, Korea Electric Power Corporation (KEPCO) was separated and divided into six companies - five thermal power and one hydro and nuclear power generation companies - in last April. After the reorganization of KEPCO and the break-up of monopoly, the new electric power industry will be driven by market force. (author)

  16. Survey on Issues related to National Nuclear Promotion Policy

    International Nuclear Information System (INIS)

    Woo, Byungchool; Lee, Youngjoon; Lee, Youngcheol; Jeong, I. K.; Kim, Hyunjun; Kim, Youngsoo; Yun, Sungwon; Moon, Keehwan; Chung, Whansam

    2013-06-01

    Ο Major issues surrounding nuclear are including suspicions about nuclear safety, spent-fuel management, acquiring the advanced R and D capabilities and making the nuclear a creative industry Ο Solid measures for securing safety should be formulated and implemented for reducing public anxiety of nuclear use Ο The long-term R and D performance system from a scientific perspective should be established for expanding Research and Development for safer use of nuclear Ο The spent-fuel management policy should be determined through publicizing process Ο Establishing small and medium enterprises-oriented supply system of reactors and SMRs and Encouraging the radiation fusion technology industrialization for promoting creative industry utilizing nuclear

  17. An integrative framework for managing project issues across stakeholder groups

    NARCIS (Netherlands)

    van Offenbeek, Marjolein A.G.; Vos, Janita F.J.

    2016-01-01

    The stakeholders and the issues associated with a project are different concepts but closely interconnected. Despite this, the project stakeholder management literature falls short in analyzing the linkages between the stakeholders and the issues they bring. This paper develops a multilayered

  18. Cooling in the food industry. Special issue; Koelen in de voedingsindustrie. Themanummer

    Energy Technology Data Exchange (ETDEWEB)

    Anon,

    1998-03-01

    In five brief articles attention is paid to the cooling and freezing processes and equipment in the food industry. The following subjects are discussed: the Hazard Analysis and Critical Control Points system (HACCP) to reduce the hygienic risks in the food processing industry to a minimum, indoor climate control for the chicory-roots storage facilities, temperature control of the freezing process for baguettes, a total supermarket management system that meets the HACCP standard, and the use of a cooling simulation program to save energy in a slaughterhouse

  19. Methodical Approach to Managing Resources at an Industrial Enterprise

    Directory of Open Access Journals (Sweden)

    Antonets Olga O.

    2013-11-01

    Full Text Available The goal of the article lies in identification of optimal ways of managing material resources of an industrial enterprise on the basis of economic and mathematical modelling. In the process of analysis and systematisation of works of foreign and domestic scientists the article makes a conclusion about the insufficient degree of development of such complex solutions on formation of logistic systems of resource management, which would be simple and adaptive. The article provides results of the study of specific features of resource management at enterprises, among which – surplus (deficit of resources and availability of non-liquid reserves. In order to eliminate shortcomings the article offers a situational order of management with consideration of a possible state of reserves. The article improves the model of selection of the volume of supply of material resources and identifies optimal solutions with consideration of interval uncertainty. The further direction of the study lies in integration of the proposed approach to resource management with the system of financial planning at an industrial enterprise.

  20. Proceedings of the Canadian Institute conference on supply chain management in the oil and gas industry : major capital construction projects, maintenance, repair and operations

    International Nuclear Information System (INIS)

    2005-01-01

    Many companies are now being forced to focus on careful budgeting to ensure that the capital costs of large-scale construction projects do not exceed their budgets. Operators are now investigating the role of supply chain management in reducing project costs. This conference provided a forum for the discussion of issues related to large construction projects for supply chain management in the oil and gas industry. Participants at the conference discussed methods of negotiating with contractors in order to manage higher prices for steel and other commodities. Best practices for maintaining effective purchaser-contractor relations were discussed along with cost benchmarks in contracts and management planning techniques for supply chain processes. The benefits of adopting vendor-managed inventory systems were also examined. Sourcing strategies were presented and issues related to transportation were reviewed along with various planning models. The conference featured 16 presentations. tabs., figs

  1. INSTRUMENTAL PROVISION OF INDICATIVE MANAGEMENT FOOD INDUSTRY AND ITS IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    N. V. Sirotkina

    2013-01-01

    Full Text Available The article is devoted to instruments of indicative management of industrial enterprises, which represent a means of making objective and operational administration solutions, theoretical research, as well as the implementation of management actions on the basis of the analytical and forecasting estimates management indicator.

  2. Fleet management tools for the utility industry

    Energy Technology Data Exchange (ETDEWEB)

    Caywood, J. [Terex Telelect, Watertown, SD (United States)

    2002-08-01

    In order to enable fleet managers to make the appropriate decisions concerning buying, selling, renting, leasing or repairing vehicles, information about ownership and operating cost and utilization are important. Fleet management tools are now available in the heavy construction industry. The author describes one such fleet management services customized for the utility industry: FleetEdge. This system utilizes current and future technologies to enable the managers to take proactive or predictive approaches to fleet management. An example of a company that has opted for this system was reviewed: Reliant Energy-Houston Metro. The data collection process was explained. A mini-computer processor is fitted on the equipment, and the requested monitoring parameters in turn determine the variety of sensors and alarms to be selected. Location can also be monitored through the use of Global Positioning System (GPS) equipment. The parameters normally include low engine oil pressure, high engine operating temperature, high transmission operating temperature, high hydraulic oil temperature, engine hours. Wireless data transfer is effected via cellular or satellite networks. The data is then collected and checked for errors and format at a hub before going to the computer server through the Internet. Information is transmitted from the accounting system to fleet management service through a secure interface. The data is then configured to meet the client's needs. It results in up to date, understandable information to the client. Equipment utilization, downtime and cost by machine or category is easily accessible and printed if required. Fleet equipment status is provided, as well as hourly cost analysis. Other reports are also available. 2 tabs., 2 figs.

  3. International trade and waste and fuel managment issue, 2006

    Energy Technology Data Exchange (ETDEWEB)

    Agnihotri, Newal (ed.)

    2006-01-15

    The focus of the January-February issue is on international trade and waste and fuel managment. Major articles/reports in this issue include: HLW management in France, by Michel Debes, EDF, France; Breakthroughs from future reactors, by Jacques Bouchard, CEA, France; 'MOX for peace' a reality, by Jean-Pierre Bariteau, AREVA Group, France; Swedish spent fuel and radwaste, by Per H. Grahn and Marie Skogsberg, SKB, Sweden; ENC2005 concluding remarks, by Larry Foulke, 'Nuclear Technology Matters'; Fuel crud formation and behavior, by Charles Turk, Entergy; and, Plant profile: major vote of confidence for NP, by Martti Katka, TVO, Finland.

  4. Mediating effect of sustainable product development on relationship between quality management practices and organizational performance: Empirical study of Malaysian automotive industry

    Science.gov (United States)

    Ahmad, Mohd Akhir; Asaad, Mohd Norhasni; Saad, Rohaizah; Iteng, Rosman; Rahim, Mohd Kamarul Irwan Abdul

    2016-08-01

    Global competition in the automotive industry has encouraged companies to implement quality management practices in all managerial aspects to ensure customer satisfaction in products and reduce costs. Therefore, guaranteeing only product quality is insufficient without considering product sustainability, which involves economic, environment, and social elements. Companies that meet both objectives gain advantages in the modern business environment. This study addresses the issues regarding product quality and sustainability in small and medium-sized enterprises in the Malaysian automotive industry. A research was carried out in 91 SMEs automotive suppliers in throughout Malaysia. The analyzed using SPSS ver.23 has been proposed in correlation study. Specifically, this study investigates the relationship between quality management practices and organizational performance as well as the mediating effect of sustainable product development on this relationship.

  5. How to manage sustainable supply chain? The issue of maturity

    Directory of Open Access Journals (Sweden)

    Agata Rudnicka

    2016-12-01

    Full Text Available Background: The issue of managing sustainability in supply chain seems to be more and more complex. There are many aspects that need to be taken into consideration when planning, implementing and monitoring environmental and social conditions of supply chains. Despite many works, already published, on the concept of sustainable development (SD is seems that the issue of assessment and especially the issue of maturity in the light of the SD concept is still not developed enough. Methods: The general aim of the paper is the analysis of the maturity issue in the context of sustainability. The main objective is to conceptualize the idea of maturity in sustainable supply chain. Beside the literature research the own proposition of theoretical model was described. Results: The article describes the issue of maturity as an element of managing sustainable development in the supply chain. The author presented a theoretical model of the maturity. Moreover the author gave some recommendations how to manage the sustainability issues in supply chain in more mature approach and introduced some useful tools among which are: certification, code of conduct and code of ethics, audits, projects etc. Conclusions: The issue of maturity seems to be very useful for proper understanding the idea of sustainable development in supply chain. The developed model can be used as self-assessment method to check at which level of implementation the idea of SD is analyzed in supply chain. Furthermore, the next phase of the planned research in form of practical verification of the model was advised as well as a research of identification of new factors and tools in analyzed area.

  6. Applying the competence-based approach to management in the aerospace industry

    Directory of Open Access Journals (Sweden)

    Arpentieva Mariam

    2018-01-01

    Full Text Available Problems of management in aerospace manufacturing are similar to those we observe in other sectors, the main of which is the flattening of strategic management. The main reason lies in the attitude towards human resource of the organization. In the aerospace industry employs 250 thousand people, who need individual approach. The individual approach can offer competence-based approach to management. The purpose of the study is proof of the benefits of the competency approach to human resource management in context strategic management of the aerospace organization. To achieve this goal it is possible to obtain the method of comparative analysis. The article compares two approaches to personnel management. The transition to competence-based human resource management means (a a different understanding of the object of management; (b involvement in all functions of human resource management «knowledge – skills – abilities» of the employee; (c to change the approach to strategic management aerospace industry.

  7. Issues for the long term management of radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, T.; Schieber, C. [CEPN, 92 - Fontenay-aux-Roses (France); Lavelle, S. [ICAM, 59 - Lille (France)

    2006-07-01

    High-level radioactive waste are currently managed in interim storage installations, providing an adequate protection of the public and the workers for the short term period. However, the long-term persistence of the radioactivity of the waste gives a new timescale dimension, never experimented by the society for the development of protection systems. In the framework of the European Commission research project 'COWAM-2' (COmmunity WAste Management) dedicated to the governance of radioactive waste management, the issues of 'long term governance' have been addressed by exploring the elements which can contribute to a better integration of the technical and societal time dimensions, taking into account technical, ethical, economic and organizational considerations. The originality of this project is to address the various issues within working groups involving stakeholders from different origins and European countries together with a research team. After a discussion on the time dimensions to be taken into account from the technical and societal perspective, this paper presents, mainly based on the findings of the COWAM-2 project, a brief analysis of the ethical criteria to be considered when future generations are concerned as well as some performance criteria regarding long term governance. Finally, it proposes a discussion on the interest for the radiation protection experts to engage a process with stakeholders concerned by radioactive waste management in order to favour the emergence of a sustainable management responding to the issues at stake and including radiation protection considerations for long term periods. (authors)

  8. Management: A bibliography for NASA managers

    Science.gov (United States)

    1992-01-01

    This bibliography lists 630 reports, articles and other documents introduced into the NASA Scientific and Technical Information System in 1991. Items are selected and grouped according to their usefulness to the manager as manager. Citations are grouped into ten subject categories: human factors and personnel issues; management theory and techniques; industrial management and manufacturing; robotics and expert systems; computers and information management; research and development; economics, costs and markets; logistics and operations management; reliability and quality control; and legality, legislation, and policy.

  9. Economic Factors Impacting Food Allergen Management: Perspectives from the Food Industry.

    Science.gov (United States)

    Gupta, Ruchi S; Taylor, Steve L; Baumert, Joseph L; Kao, Lauren M; Schuster, Erik; Smith, Bridget M

    2017-10-01

    Food allergies affect up to 8% of children in the United States and may occasionally lead to severe life-threatening reactions. Because there is currently no cure for food allergies, strict avoidance of the allergen-containing foods is the only means of preventing an allergic reaction. Consumers rely on food manufacturers to reliably track and declare the presence of food allergens in products. Over the past 10 to 20 years, the food industry has increasingly adopted allergen control approaches in its processing facilities. However, the major industry costs related to food allergen management have not been fully described. The objective of this study was to characterize the factors that contribute to the economic impact of food allergen control practices on the food industry. A focus group (n = 100) was conducted with food industry professionals to identify key areas of cost for food allergen management. A survey based on the domains identified was then developed and disseminated to a convenience sample (n = 50) of quality control food industry specialists with knowledge of their company's food allergen management practices. Nearly all companies (92%) produced food products containing one or more of the top eight allergenic foods recognized by the U.S. Food and Drug Administration or sesame seeds. Cleaning procedures, employee training, and the potential for a recall due to allergen cross-contact were most frequently rated as the important factors in food allergen management. Recalls due to food allergen cross-contact, cleaning procedures, equipment and premises design, and employee training were ranked as the greatest allergen management expenses. Although 96% of companies had a food allergen control plan in place, nearly half (42%) had at least one food allergen-related recall within the past 5 years. The industry appears to endorse a willingness to unify precautionary allergen labeling to communicate a clear message more effectively to consumers.

  10. Enhancing chronic disease management: a review of key issues and strategies.

    Science.gov (United States)

    Willison, Kevin D; Williams, Paul; Andrews, Gavin J

    2007-11-01

    This paper highlights three selected issues and potential strategies towards meeting chronic disease management needs. First, the orientation of the biomedical science model often gives insufficient attention to chronic health care needs. A second issue is that the use of complementary and alternative medicine (CAM) may offer for some an opportunity to enhance their chronic disease management efforts. A third issue is that our understanding of this potential is limited, as many who use CAM do not disclose such use. With reference to proposed solutions/strategies, first, an improved focus to respect patient/client values and goals may encourage people to disclose their use of CAM. Second, a community-based participatory approach shows promise in enhancing communication plus helps integrate CAM within new models of chronic disease management. Lastly, those in public health could help facilitate such an approach plus be a monitor of CAM practices. Overall, this review provides a springboard for further research and practice in CAM and the management of chronic diseases.

  11. Risk management in the construction industry: a new literature review

    Directory of Open Access Journals (Sweden)

    Renault Berenger Y.

    2016-01-01

    Full Text Available The construction industry is well known as a highly risk prone industry owing to the complexity of its activities and dynamic project environments generating an atmosphere of risks that must be taken into consideration in the decision process. For this reason, we have developed this treatise to elucidate the fundamentals of risk management through a concise new proposal of literature review for risk management in construction. Our explanation of this is venture is that over the years, this area has been acknowledged as a crucial process in the business institutions and the most discussed subject among experts and researchers in the construction sector. We have tried in this report to present the most recent studies considering the impossibility to present all definitions of the concept of risk. This study is mainly a literature review; it looks at the literature relating to the concept of risk, risk management in construction as well as methods used in construction industry.

  12. New Brunswick Market Design Committee : Congestion management issues

    International Nuclear Information System (INIS)

    2001-01-01

    The restructuring of the New Brunswick wholesale power market comprises a number of issues that need to be resolved concerning transmission system related policy decisions and detailed design issues. The wholesale market structure, ownership structure, and means of preventing market power abuses all have an impact on the resolution of many of those issues. Some transmission related decisions regarding congestion management must be made, and they are examined in this document. The report includes a discussion of the issues related to congestion on the transmission system, a review of the decisions that remain to be made while proposing a number of alternatives, reviews decisions that other jurisdictions have made in somewhat similar circumstances. Finally, the advantages and disadvantages of each alternative are identified. Several high level transmission tariff design issues requiring to be addressed later in greater detail are listed in this document. 1 tab

  13. Ethical, environmental and social issues for machine vision in manufacturing industry

    Science.gov (United States)

    Batchelor, Bruce G.; Whelan, Paul F.

    1995-10-01

    Some of the ethical, environmental and social issues relating to the design and use of machine vision systems in manufacturing industry are highlighted. The authors' aim is to emphasize some of the more important issues, and raise general awareness of the need to consider the potential advantages and hazards of machine vision technology. However, in a short article like this, it is impossible to cover the subject comprehensively. This paper should therefore be seen as a discussion document, which it is hoped will provoke more detailed consideration of these very important issues. It follows from an article presented at last year's workshop. Five major topics are discussed: (1) The impact of machine vision systems on the environment; (2) The implications of machine vision for product and factory safety, the health and well-being of employees; (3) The importance of intellectual integrity in a field requiring a careful balance of advanced ideas and technologies; (4) Commercial and managerial integrity; and (5) The impact of machine visions technology on employment prospects, particularly for people with low skill levels.

  14. Structural financing and management of investment projects in the Nigerian mineral industry

    International Nuclear Information System (INIS)

    Akingbola, E. B. O.

    1997-01-01

    The mineral industry is attractive because of the diversity and abundance of the deposits. The economic and financial implications of exploiting these are considered. The issues discussed include capital requirement, international outlook, investment opportunities in the mineral industry, oil and gas, solid minerals, attracting investment into the mineral industry,structural financing, macro economic stability. The paper concludes that the ability of the industry to continue attracting foreign capital is crucial to its survival, growth and development

  15. Hazardous waste management in Chilean main industry: An overview

    International Nuclear Information System (INIS)

    Navia, Rodrigo; Bezama, Alberto

    2008-01-01

    The new 'Hazardous Waste Management Regulation' was published in the Official Newspaper of the Chilean Republic on 12 June 2003, being in force 365 days after its publication (i.e., 12 June 2004). During the next 180 days after its publication (i.e., until 12 December 2004), each industrial facility was obligated to present a 'Hazardous Waste Management Plan' if the facility generates more than 12 ton/year hazardous wastes or more than 12 kg/year acute toxic wastes. Based on the Chilean industrial figures and this new regulation, hazardous waste management plans were carried out in three facilities of the most important sectors of Chilean industrial activity: a paper production plant, a Zn and Pb mine and a sawmill and wood remanufacturing facility. Hazardous wastes were identified, classified and quantified in all facilities. Used oil and oil-contaminated materials were determined to be the most important hazardous wastes generated. Minimization measures were implemented and re-use and recycling options were analyzed. The use of used oil as alternative fuel in high energy demanding facilities (i.e., cement facilities) and the re-refining of the used oil were found to be the most suitable options. In the Zn and Pb mine facility, the most important measure was the beginning of the study for using spent oils as raw material for the production of the explosives used for metals recovery from the rock. In Chile, there are three facilities producing alternative fuels from used oil, while two plants are nowadays re-refining oil to recycle it as hydraulic fluid in industry. In this sense, a proper and sustainable management of the used oil appears to be promissory

  16. Integration of industrial risk in regional policy management. Possibilities of evaluation

    International Nuclear Information System (INIS)

    Hubert, Philippe; Pages, Pierre

    1990-02-01

    Since the responsibility for risk management depends more and more on regional factors, evaluation methods and management regulations are not developed enough. This study start from the fact that an important methods exist for evaluation transport of dangerous materials in cities, risk analysis and emergency plans related to classified installations, management of quality of water, 'chronic' industrial risks at local and regional level, probabilistic estimation for industrial plants. The objective is in fact to show what risk analysis could bring to the municipality, the city or the region [fr

  17. The need for a comprehensive energy management information system for industries

    Directory of Open Access Journals (Sweden)

    Goosen, P

    2016-11-01

    Full Text Available Electricity costs in South Africa are increasing rapidly, and the funding hurdle rates for energy conservation incentives are decreasing. Therefore, with rising international competition and increasing operational costs, marginal industries need to focus on energy management strategies where larger savings can be achieved with lower capital expenditure. This paper sketches the need for a comprehensive energy management information system (EMIS. Common industrial energy management pitfalls are identified and energy conservation incentives are outlined. New focus points that improve client awareness and in turn improve the sustainability of energy management interventions are also highlighted. However, benefitting from energy incentives is becoming more complex. Therefore, many clients do not benefit from these incentives unless specialised Energy Service Companies (ESCos are employed. ESCos, however, require large amounts of data to manage clients’ energy effectively. Herein lies the need for a comprehensive EMIS that aids ESCos and their clients with the energy management process. An EMIS was developed and implemented for several industries in South Africa. Data is automatically collected, processed, analysed, and presented on a daily basis. A case study investigates the exorbitant amounts of data and reports that are managed automatically, which further highlights the need for a comprehensive EMIS.

  18. The Safety Attitudes of Senior Managers in the Chinese Coal Industry.

    Science.gov (United States)

    Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

    2016-11-17

    Introduction: Senior managers' attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers' attitudes towards safety in the Chinese coal industry. Method : We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions : Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers' safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers' unions not playing their role effectively. Practical Applications : We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

  19. The Training of Technical Staff in Libyan Industrial Companies: Issues in Traning Needs Analysis

    Directory of Open Access Journals (Sweden)

    Mohamed Shibani

    2017-05-01

    Full Text Available By implementing Training Needs Analysis (TNA, organisations can improve the training need identification process and minimise the influence of social factors on nominations for training; such as kinship and friendship, which makes the managers exercised mediation "wasta" and favouritism when they perform their tasks. Therefore, paper presents the results of an investigation into current TNA practice in Libyan industrial companies (LICs, including the barriers that prevent its successful implementation and how it might be improved. A qualitative approach was adopted in collecting data by means of semi-structured interviews with 17 senior managers in two selected companies. The findings show that training needs are mostly identified through an analysis at the individual level only and that no consideration is given to organisational or operational levels. The paper contributes to existing knowledge on the application and effectiveness of TNA in industrial sectors by specifically investigating the implementation of TNA in the Libyan industrial context; it offers ideas and insights to those responsible for training in LICs to improve their understanding of the role of TNA and how they can manage the TNA process to help develop their employees.

  20. Managing biodiversity for a competitive ecotourism industry in tropical developing countries: New opportunities in biological fields

    Science.gov (United States)

    Hakim, Luchman

    2017-11-01

    Managing biodiversity for sustainable and competitive ecotourism destinations requires a basic understanding of the principles of biology, which are poorly understood in tropical developing countries, including Indonesia. This paper describes the current status of tourism in Indonesia, identifies environment and biodiversity vulnerability in tourism destinations, and explores the challenges of the biological field in supporting ecotourism development. This review found that tourism, especially nature-based and ecotourism, has grown significantly in Indonesia, and the contribution of Indonesian biodiversity has been identified as significant. Threats to biodiversity, however, are found in nature-based tourism destinations. Issues related to pollution, exotic plant species invasion, habitat changes and degradation, habitat loss, and wildlife disturbance are widely reported, indicating the importance of such issues in destination management. Pollution is found in both terrestrial and aquatic ecosystems. Water pollution is an important issue among lakes and rivers. To date, there are few assessments of the impact of tourism activities on aquatic ecosystems, resulting in the management of aquatic ecosystems facing numerous difficulties. These studies identify the invasive plants found, which become a crucial problem in many nature-based tourism destinations, and which significantly contribute to a reduction in the existence of many flora-fauna in a wild habitat. Habitat changes and degradation are mostly influenced by tourism infrastructure development. Massive infrastructure development often leads to habitat loss, which is a crucial step in local biodiversity extinction. Increasing and uncontrolled visitor behaviors influence animal behavior changes, which is recognized as a dangerous phenomenon affecting animal survival in the future. An agenda for future integrative biological research is needed to improve resource management, to increase sustainability and the

  1. Environmental issues in operations management

    Science.gov (United States)

    Muthulingam, Suresh

    Adoption of sustainable operating practices is becoming an increasingly important issue for many organizations in the world today. In this dissertation, I use empirical methods to investigate factors that influence the adoption of sustainable practices and also identify issues that may hinder the adoption of such practices. I explore these issues in two diverse settings. In Chapter 1, I investigate the adoption and non-adoption of energy efficiency initiatives using a database of over 100,000 recommendations provided to more than 13,000 small and medium sized manufacturing firms. Even though the average payback across all recommendations is just over one year, many of these profitable opportunities are not implemented. Using a probit instrumental variable model, I identify four biases in the adoption of these recommendations. First, managers are myopic as they miss out on many profitable opportunities. Second, managers are more influenced by upfront costs than by net benefits when evaluating such initiatives. Third, adoption of a recommendation depends not only on its characteristics but also on the sequence in which the recommendations are presented. Adoption rates are higher for initiatives appearing early in a list of recommendations. Finally, adoption is not influenced by the number of options provided to decision makers. This contributes to the debate about whether or not choice overload occurs. We highlight decision biases previously unobserved in the Operations Management literature using field data rather than experimental data. We draw implications for enhancing adoption of energy efficiency initiatives and for other decision contexts where a collection of process improvement recommendations are made to firms. In Chapter 2, I examine the depth of adoption of the voluntary LEED (Leadership in Energy and Environmental Design) standards for green buildings. Depth of adoption refers to the extent to which the buildings adopt practices related to the standard

  2. Industrial waste and pollution in Mongolia

    Energy Technology Data Exchange (ETDEWEB)

    Dolgormaa, L. [Minstry of Nature and Environment, Ulaanbaatar (Mongolia)

    1996-12-31

    This paper very briefly outlines hazardous waste management issues, including regulations, in Mongolia. Air, water, and soil pollutants are identified and placed in context with climatic, social, and economic circumstances. The primary need identified is technology for the collection and disposal of solid wastes. Municipal waste problems include rapid urbanization and lack of sanitary landfills. Industrial wastes of concern are identified from the mining and leather industries. 4 refs., 2 tabs.

  3. Industrial long-term waste management in France

    International Nuclear Information System (INIS)

    Marque, Y.

    1988-01-01

    Long-term industrial management of radioactive waste in France is carried out by the Agence Nationale pour la Gestion des Dechets Radioactifs (ANDRA). ANDRA is in charge of design, siting, construction and operation of disposal centers. The French national program of waste management is running on with the construction of a second near-surface disposal which is expected to be in operation in 1991 and a selection of a site for the construction of an underground laboratory for the qualification of this site for deep disposal

  4. TOTAL QUALITY MANAGEMENT AND CONTEMPORARY HOTEL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Ivica Batinić

    2013-04-01

    Full Text Available Strong competition in the market has caused the development of a new management approach known as Total Quality Management (TQM. Due to importance that quality plays in achieving competitive advantage, the hotel industry started to apply TQM. During the introduction of these systems, hotel companies may use different approaches to suit their own buseiness requirements. In doing so, 'TQM standards' can be used, or various international standards and models of business excellence Malcolm Balridge National Quality Award and European Quality Award.

  5. Current Issues and Situation of Producer Responsibility in Waste Management in Indonesia

    Directory of Open Access Journals (Sweden)

    Antonius Priyo Nugroho Sulami

    2017-11-01

    Full Text Available Producer responsibility for wastes has been encouraged in Indonesia since 2008. The Ministry of Environment of the Republic of Indonesia also promoted the reduce, reuse, and recycle (3R concept using the community-based approach of waste banks integrated with the extended producer responsibility (EPR concept. However, related research and implementation are still limited. This study aims to identify the challenges of fulfilling producer responsibility in waste management and determine whether the integration concept could generate outcomes expected from the EPR concept. A semi-structured interview survey of several stakeholders from the government, industrial, and waste management sectors was conducted and the data generated was used to simulate an integration scheme using a system dynamics approach. Secondary data and information from Bandung municipality were used as input for the simulation. The interview survey found that the concerns and issues of fulfilling producer responsibility in waste management include lack of awareness, unavailability of clear guidelines, and the limited capacity of the current recycling sector. The results of the simulation suggested that if the integration scheme is applied, each business entity might bear the responsibility of IDR 29.4 million per year and 14.7 tons of waste per year for the scope of four sectors and IDR 34.1 million per year and 17 tons of waste per year for the scope of two sectors.

  6. Guidelines for integrated risk assessment and management in large industrial areas. Inter-Agency programme on the assessment and management of health and environmental risks from energy and other complex industrial systems

    International Nuclear Information System (INIS)

    1998-01-01

    The IAEA, the United Nations Environment Programme (UNEP) within the framework of the Awareness and Preparedness for Emergencies at Local Level (APELL), the United Nations Industrial Development Organization (UNIDO) and the World Health Organization (WHO) decided in 1986 to join forces in order to promote the use of integrated area wide approaches to risk management. An Inter-Agency Programme, which brings together expertise in health the environment, industry and energy, all vital for effective risk management, was established. The Inter-Agency Programme on the assessment and Management of Health and Environmental Risks from Energy and Other Complex Industrial Systems aims at promoting and facilitating the implementation of integrated risk assessment and management for large industrial areas. This initiative includes the compilation of procedures and methods for environmental and public health risk assessment, the transfer of knowledge and experience amongst countries in the application of these procedures and the implementation of an integrated approach to risk management. The purpose of the Inter-Agency Programme is to develop a broad approach to the identification, prioritization and minimization of industrial hazards in a given geographical area. The UN organizations sponsoring this programme have been involved for several years in activities aimed at assessment and management of environmental and health risks, prevention of major accidents and emergency preparedness. These Guidelines have been developed on the basis of experience from these activities to assist in the planning and conduct of regional risk management projects. They provide a reference framework for the undertaking of integrated health and environmental risk assessment for large industrial areas and for the formulation of appropriate risk management strategies

  7. Guidelines for integrated risk assessment and management in large industrial areas. Inter-Agency programme on the assessment and management of health and environmental risks from energy and other complex industrial systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    The IAEA, the United Nations Environment Programme (UNEP) within the framework of the Awareness and Preparedness for Emergencies at Local Level (APELL), the United Nations Industrial Development Organization (UNIDO) and the World Health Organization (WHO) decided in 1986 to join forces in order to promote the use of integrated area wide approaches to risk management. An Inter-Agency Programme, which brings together expertise in health the environment, industry and energy, all vital for effective risk management, was established. The Inter-Agency Programme on the assessment and Management of Health and Environmental Risks from Energy and Other Complex Industrial Systems aims at promoting and facilitating the implementation of integrated risk assessment and management for large industrial areas. This initiative includes the compilation of procedures and methods for environmental and public health risk assessment, the transfer of knowledge and experience amongst countries in the application of these procedures and the implementation of an integrated approach to risk management. The purpose of the Inter-Agency Programme is to develop a broad approach to the identification, prioritization and minimization of industrial hazards in a given geographical area. The UN organizations sponsoring this programme have been involved for several years in activities aimed at assessment and management of environmental and health risks, prevention of major accidents and emergency preparedness. These Guidelines have been developed on the basis of experience from these activities to assist in the planning and conduct of regional risk management projects. They provide a reference framework for the undertaking of integrated health and environmental risk assessment for large industrial areas and for the formulation of appropriate risk management strategies. Refs, figs, tabs.

  8. An overview of knowledge management (KM) issues for implementation in consultant firms in Malaysian construction industry

    Science.gov (United States)

    Othman, Azlan; Ismail, Syuhaida; Yahya, Khairulzan

    2017-12-01

    In the past few years, there has been a growing interest in treating knowledge as a significant organisational resource. Thus, effective development and implementation of KM requires a foundation in several rich literatures. As a preparation for the competitive industrial nation, KM is an important countenance that should be the point of convergence for the industry players. This paper wishes to draw the attention on the current situation of KM practice, focusing on consultant firms in Malaysian construction industry. Questionnaires were distributed to about 200 respondents working in the industry, with the objective of appraising the KM implementation amongst consultant firms working in construction industry in Malaysia. This paper also gives the overview on KM definition, process, understanding and challenges in construction industry, besides the critical success factor of KM implementation. The literature is restricted on the recent KM study of 17 years research from 2000 to 2017. Finally, this paper proposes the conceptual ideas of relationship between KM process, KM understanding and KM challenges with critical success factor of KM implementation.

  9. The challenges and issues facing the radioactive waste management in Croatia

    International Nuclear Information System (INIS)

    Subasic', D.; Saler, A.

    1994-01-01

    There are substantial experiences in Croatia in the field of radioactive waste management concerning both the waste from nuclear applications and waste generated at nuclear power plant. The essential issue now is how set-up infrastructure and to realize institutional and capacity building to get adjusted to needs of the newly independent state. In connection to this, the issues related to national radioactive waste management strategy, past and new organization of the Regulatory Body, and changes in legislation and regulations are discussed. In addition, some on-going projects important for realization of a complete radioactive waste management in the country round up the present situation in the field of radioactive waste management in Croatia

  10. Cattle and the oil and gas industry in Alberta: a literature review with recommendations for environmental management

    International Nuclear Information System (INIS)

    Bertram, H.L.; Ceroici, W.J.; Coleman, R.N.; Coppock, R.W.; Florence, L.Z.; Johnson, R.L.; Khan, A.A.; Liem, A.J.; Schuler, M.M.; Smillie, R.D.; Wilson, M.A.; Yeung, P.P.Y.; Dabrowski, T.L.; Lyness, L.S.; Sevigny, J.H.

    1996-07-01

    Issues relating to the effect of the oil and gas industry on cattle production in Alberta, were discussed. A review of scientific literature, industry codes of practices and government regulations pertaining to the subject was compiled and the potential effects of substances on cattle production were examined. The substances used by Alberta's oil and gas industry in field activities such as exploration, drilling, property development, collection, transportation, refining and processing were described. The chemicals and their toxicological effects were identified. The atmospheric, groundwater and surface water pathways by which those substances are transported was studied. It was concluded that hydrogen sulfide, crude oil and salt water pose the greatest threat to cattle. The exact effects of aromatic hydrocarbons, liquid condensates, methane, carbon dioxide, heavy metals, glycols, methanol, and volatile organic compounds on cattle production, were not fully determined. Recommendations about environmental management, including the need for monitoring programs and research priorities, were presented. 166 refs., 49 tabs., 36 figs

  11. Radiological protection, safety and security issues in the industrial and medical applications of radiation sources

    International Nuclear Information System (INIS)

    Vaz, Pedro

    2015-01-01

    The use of radiation sources, namely radioactive sealed or unsealed sources and particle accelerators and beams is ubiquitous in the industrial and medical applications of ionizing radiation. Besides radiological protection of the workers, members of the public and patients in routine situations, the use of radiation sources involves several aspects associated to the mitigation of radiological or nuclear accidents and associated emergency situations. On the other hand, during the last decade security issues became burning issues due to the potential malevolent uses of radioactive sources for the perpetration of terrorist acts using RDD (Radiological Dispersal Devices), RED (Radiation Exposure Devices) or IND (Improvised Nuclear Devices). A stringent set of international legally and non-legally binding instruments, regulations, conventions and treaties regulate nowadays the use of radioactive sources. In this paper, a review of the radiological protection issues associated to the use of radiation sources in the industrial and medical applications of ionizing radiation is performed. The associated radiation safety issues and the prevention and mitigation of incidents and accidents are discussed. A comprehensive discussion of the security issues associated to the global use of radiation sources for the aforementioned applications and the inherent radiation detection requirements will be presented. Scientific, technical, legal, ethical, socio-economic issues are put forward and discussed. - Highlights: • The hazards associated to the use of radioactive sources must be taken into account. • Security issues are of paramount importance in the use of radioactive sources. • Radiation sources can be used to perpetrate terrorist acts (RDDs, INDs, REDs). • DSRS and orphan sources trigger radiological protection, safety and security concerns. • Regulatory control, from cradle to grave, of radioactive sources is mandatory.

  12. A Suitable Software Process Improvement Model for the UK Healthcare Industry

    Science.gov (United States)

    Nguyen, Tien D.; Guo, Hong; Naguib, Raouf N. G.

    Over the recent years, the UK Healthcare sector has been the prime focus of many reports and industrial surveys, particularly in the field of software development and management issues. This signals the importance of growing concerns regarding quality issues in the Healthcare domain. In response to this, a new tailored Healthcare Process Improvement (SPI) model is proposed, which takes into consideration both signals from the industry and insights from literature.

  13. A methodology to incorporate life cycle analysis and the triple bottom line mechanism for sustainable management of industrial enterprises

    Science.gov (United States)

    Wang, Ling; Lin, Li

    2004-02-01

    Since 1970"s, the environmental protection movement has challenged industries to increase their investment in Environmentally Conscious Manufacturing (ECM) techniques and management tools. Social considerations for global citizens and their descendants also motivated the examination on the complex issues of sustainable development beyond the immediate economic impact. Consequently, industrial enterprises have started to understand sustainable development in considering the Triple Bottom Line (TBL): economic prosperity, environmental quality and social justice. For the management, however, a lack of systematic ECM methodologies hinders their effort in planning, evaluating, reporting and auditing of sustainability. To address this critical need, this research develops a framework of a sustainable management system by incorporating a Life Cycle Analysis (LCA) of industrial operations with the TBL mechanism. A TBL metric system with seven sets of indices for the TBL elements and their complex relations is identified for the comprehensive evaluation of a company"s sustainability performance. Utilities of the TBL indices are estimated to represent the views of various stakeholders, including the company, investors, employees and the society at large. Costs of these indices are also captured to reflect the company"s effort in meeting the utilities. An optimization model is formulated to maximize the economic, environmental and social benefits by the company"s effort in developing sustainable strategies. To promote environmental and social consciousness, the methodology can significantly facilitate management decisions by its capabilities of including "non-business" values and external costs that the company has not contemplated before.

  14. Clean water and family forest management: some emerging issues

    Science.gov (United States)

    Peter A. Bisson

    2011-01-01

    Demand for clean water for a variety of uses will increase. Watersheds are where we live, grow crops and create various forms of industry. As the Pacific Northwest's human population expands, competition for water and the ecological goods and services that water provides will grow more intense. With this in mind it is helpful to review emerging issues that are of...

  15. Challenges in packaging waste management in the fast food industry

    Energy Technology Data Exchange (ETDEWEB)

    Aarnio, Teija [Digita Oy, P.O. Box 135, FI-00521 Helsinki (Finland); Haemaelaeinen, Anne [Department of Energy and Environmental Technology, Lappeenranta University of Technology, P.O. Box 20, FI-53851 Lappeenranta (Finland)

    2008-02-15

    The recovery of solid waste is required by waste legislation, and also by the public. In some industries, however, waste is mostly disposed of in landfills despite of its high recoverability. Practical experiences show that the fast food industry is one example of these industries. A majority of the solid waste generated in the fast food industry is packaging waste, which is highly recoverable. The main research problem of this study was to find out the means of promoting the recovery of packaging waste generated in the fast food industry. Additionally, the goal of this article was to widen academic understanding on packaging waste management in the fast food industry, as the subject has not gained large academic interest previously. The study showed that the theoretical recovery rate of packaging waste in the fast food industry is high, 93% of the total annual amount, while the actual recovery rate is only 29% of the total annual amount. The total recovery potential of packaging waste is 64% of the total annual amount. The achievable recovery potential, 33% of the total annual amount, could be recovered, but is not mainly because of non-working waste management practices. The theoretical recovery potential of 31% of the total annual amount of packaging waste cannot be recovered by the existing solid waste infrastructure because of the obscure status of commercial waste, the improper operation of producer organisations, and the municipal autonomy. The research indicated that it is possible to reach the achievable recovery potential in the existing solid waste infrastructure through new waste management practices, which are designed and operated according to waste producers' needs and demands. The theoretical recovery potential can be reached by increasing the consistency of the solid waste infrastructure through governmental action. (author)

  16. Study on implementation of environmental management system in textile industry in Sudan

    International Nuclear Information System (INIS)

    Mohamed, H. A.

    2010-11-01

    This conducted from June to December, the main objective of this study is to formulate manual for textile industry in Sudan. The data used in this study is secondary data from references, books manuals, web sites and reports. This theoretical data can be executed practically. The quality of life on earth is linked inextricably to the overall quality of the environment. One of the major problems facing the industrial world today is the contamination of soil, ground water, sediments, surface water and air with hazardous toxic chemicals dumped by industries as waste. While regulatory step have been implemented in the recent past to reduce or eliminate the production and release of these chemicals into the environment, significant deterioration of the environment has already occurred so far. Conventional treatments have been used by some industries, but these can be both, expensive and inherently disruptive to the environment. Thus, economical and ecological management of industrial wastes has become a major concern these days. Integrating both economical and ecological methods in waste management by implementation environmental management system in textile sector, to enable textile industry to establish waste minimization programmes, reduction of pollution and reduced environmental impact. Effective waste minimization programmes an essential aspect of any EMS compliance with ISO 14000, reduction in the risk of pollution reliability, enhanced international acceptability, competitiveness and trade. environmental sustain ability and international and national acceptance to this are presented here, which can be used a good database by the organizations which can put into use these approaches for the efficient ecological management of their industrial wastes. The main objective of this to make Sudanese textile industry environmentally friend by establish manual for this. (Author)

  17. Transfer of Knowledge Management Methods and Tools to and from the Nuclear Industry

    International Nuclear Information System (INIS)

    Pasztory, Z.; Gyulay, T.

    2016-01-01

    Full text: The discipline of the knowledge management was firstly introduced in Japan by the leading technology companies like Toyota, Canon, Honda, Mitsubishi, Sharp and others. It means outside the nuclear industry. The nuclear industry organizations including the IAEA started to deal with the knowledge management about ten years later and adapted those approaches, methods and tools developed and used in other industry organizations. After more than fifteen-years of its programmatic existence of the nuclear knowledge management in the IAEA, the trend is turn round in many topics. The nuclear industry organizations have more and more good practices to share with other industries. Meanwhile the world leading companies working in a quickly changing market environment are still developing and using KM practices which can be useful also in the “slowly-changing” nuclear industry environment. In this article we would like to pay attention—through some examples—to the importance of the benchmarking with companies outside the nuclear industry for the further safe and reliable operation of nuclear facilities and to educate and train the next nuclear generation. (author

  18. Project management for engineers

    CERN Document Server

    Bennett, Michael J

    2014-01-01

    Project Management for Engineers, as the title suggests, is a direct attempt at addressing the ever-increasing and specific needs for better project management of engineering students, practicing engineers and managers in the industry. It aims not only to present the principles and techniques of Project Management, but also to discuss project management standards, processes and requirements, such as PMBOK, IEEE and PRINCE. Each chapter begins with the basics of the theme being developed at a level understandable to an undergraduate, before more complex topics are introduced at the end of each section that are suitable for graduate students. For the practicing professionals or managers in the industry, the book also provides many real illustrations of practical application of the principles of Project Management. Through a realistic blend of theory and practical examples, as well as an integration of the engineering technical issues with business issues, this book seeks to remove the veil of mystery that has...

  19. Waste Management Strategy in The Netherlands. Part 2. Strategy Principles and Influencing Issues

    International Nuclear Information System (INIS)

    Haverkate, B.R.W.

    2002-01-01

    This report reflects the Dutch input prepared in the framework of work package 2 of the EU thematic network COMPAS, which deals with the identification of alternative waste management strategies and issues influencing strategy selection in EU member states and their applicant countries. All elements that could have an effect in identifying alternative policies to manage (long-lived) radioactive wastes are addressed in this report. After a short introduction, in chapter 1, about some general issues influencing decision-making such as public acceptance, involvement, perception and (European) legislation, the considered disposal methods and disposal requirements are given in chapter 2. Chapter 3 of this report deals with the background topics of the current waste management strategy in The Netherlands. A detailed overview of (basic) strategy principles and their influencing issues is the subject of chapter 4. Issues considered include: safety and environmental impact; technical limitations; nuclear materials safeguards; monitoring and retrievability; ethical issues; public acceptance; (timing of) strategy development and implementation; and economical considerations. Relevant additional issues that could have an effect in identifying alternative waste management strategy are provided in appendices, including signed treaties (appendix B) and nuclear statutory regulations (appendix C)

  20. The Sector Players’ Perception on the Influence of Sugarcane Environmental Protocol in Corporate Environmental Management Process: A Study of Industry Managers in the Middle Region of Assis-SP

    Directory of Open Access Journals (Sweden)

    Edenis César Oliveira

    2016-05-01

    Full Text Available Brazilian agriculture has undergone an unprecedented environmental crisis. In this scenario, it is the agribusiness and sugarcane suppliers, working in the sugarcane industry, which have had a strong growth, with significant economic, social and environmental impacts. Studies have shown that the inclusion of environmental concerns in corporate management can bring competitiveness gains for organizations, as well as improve their image before their stakeholders. The social demand for a cleaner environment, coupled with increasing environmental regulation, have forced companies in this sector to perform and participate in extensive programmes for prevention and mitigation of environmental impacts. In this design, the Agro-environmental Protocol for the Paulista sugarcane industry has arisen, consisting of a cooperation agreement signed in June 2007 between the government of the State of São Paulo, represented by the Secretaries of State for the Environment; Agriculture and Supply; Industry Union of cane sugar; and the Sugar Cane Growers Organization's South-Central Region. The research presented here aimed to investigate the perception of managers of agribusinesses and suppliers located in the middle region of Assis-SP on the influence of the Agro-environmental Protocol in corporate environmental management process. Nineteen semi-structured interviews with the environmental managers of each signatory organization were applied. The results showed strong influence of the Agro-environmental Protocol in environmental management processes of organizations, especially with the implementation and enforcement actions to meet the directive techniques of the Agro-environmental Protocol, which has contributed to organizations internalize environmental issues and moving towards a more proactive stance.

  1. 2001 Industry Studies: Aircraft

    Science.gov (United States)

    2001-01-01

    improving the quality of products and the speed of bringing products to market . However, substantial issues remain concerning information security... information technology professionals, managers, technicians, and mechanics are being lost. Competition from other industries, aging of the work force...observing the high demand and salaries for information technology professionals and the decline of long-term technologically challenging prospects for

  2. Environmental Monitoring and the Gas Industry: Program Manager Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Gregory D. Gillispie

    1997-12-01

    This document has been developed for the nontechnical gas industry manager who has the responsibility for the development of waste or potentially contaminated soil and groundwater data or must make decisions based on such data for the management or remediation of these materials. It explores the pse of common analytical chemistry instrumentation and associated techniques for identification of environmentally hazardous materials. Sufficient detail is given to familiarize the nontechnical reader with the principles behind the operation of each technique. The scope and realm of the techniques and their constituent variations are portrayed through a discussion of crucial details and, where appropriate, the depiction of real-life data. It is the author's intention to provide an easily understood handbook for gas industry management. Techniques which determine the presence, composition, and quantification of gas industry wastes are discussed. Greater focus is given to traditional techniques which have been the mainstay of modem analytical benchwork. However, with the continual advancement of instrumental principles and design, several techniques have been included which are likely to receive greater attention in fiture considerations for waste-related detection. Definitions and concepts inherent to a thorough understanding of the principles common to analytical chemistry are discussed. It is also crucial that gas industry managers understand the effects of the various actions which take place before, during, and after the actual sampling step. When a series of sample collection, storage, and transport activities occur, new or inexperienced project managers may overlook or misunderstand the importance of the sequence. Each step has an impact on the final results of the measurement process; errors in judgment or decision making can be costly. Specific techniques and methodologies for the collection, storage, and transport of environmental media samples are not

  3. The Role of Stakeholder Relationship Management Crisis Management Processes within the Hotel Industry in a Tourism Context

    Directory of Open Access Journals (Sweden)

    Nicola ZECH

    2015-04-01

    Full Text Available Rates of worldwide environmental, social, technological and other crises are perceived to be constantly increasing - if nothing else due to almost instant broadcasting by media and internet. The Tourism Industry is especially vulnerable to such crises as numerous Stakeholder Groups on the one hand and large numbers of travelers on the other hand are or might be affected. Therefore, Tourism Industry Stakeholder Groups claims regarding transparency can t be denied. This Research Paper focuses on Crisis Management processes from the aspect of the Hotel Industry in a Tourism Context considering a variety of Tourism Market Players. Theoretical foundations combined with empirical research reveal prerequisites, Status Quo as well as opportunities and challenges towards an integrated Crisis Management Model. Finally, key success factors for a Stakeholder Relationship Management based approach are introduced.

  4. ENERGY MANAGEMENT INNOVATION IN THE US SKI INDUSTRY

    Science.gov (United States)

    Ski areas represent a unique opportunity to develop innovative energy management practices in an industrial setting. Through a unique synergy of onsite generation, preferably by renewable sources and innovative technologies, and the energy storage potential of exis...

  5. 10th World Congress on Engineering Asset Management

    CERN Document Server

    Kortelainen, Helena; Aaltonen, Jussi; Uusitalo, Teuvo; Komonen, Kari; Mathew, Joseph; Laitinen, Jouko

    2016-01-01

    This book comprises refereed papers from the 10th World Congress on Engineering Asset Management (WCEAM 2015), held in Tampere, Finland in September 2015. These proceedings include a compilation of state-of-the-art papers covering a comprehensive range of subjects equally relevant to business managers and engineering professionals alike. With a focus on various aspects of engineering asset management ranging from strategic level issues to detail-level machine health issues, these papers address both industry and public sector concerns and issues, as well as advanced academic research. Proceedings of the WCEAM 2015 is an excellent reference and resource for asset management practitioners, researchers and academics, as well as undergraduate and postgraduate students at tertiary institutions or in the industry.

  6. BIM: Enabling Sustainability and Asset Management through Knowledge Management

    Directory of Open Access Journals (Sweden)

    Robbert Anton Kivits

    2013-01-01

    Full Text Available Building Information Modeling (BIM is the use of virtual building information models to develop building design solutions and design documentation and to analyse construction processes. Recent advances in IT have enabled advanced knowledge management, which in turn facilitates sustainability and improves asset management in the civil construction industry. There are several important qualifiers and some disadvantages of the current suite of technologies. This paper outlines the benefits, enablers, and barriers associated with BIM and makes suggestions about how these issues may be addressed. The paper highlights the advantages of BIM, particularly the increased utility and speed, enhanced fault finding in all construction phases, and enhanced collaborations and visualisation of data. The paper additionally identifies a range of issues concerning the implementation of BIM as follows: IP, liability, risks, and contracts and the authenticity of users. Implementing BIM requires investment in new technology, skills training, and development of new ways of collaboration and Trade Practices concerns. However, when these challenges are overcome, BIM as a new information technology promises a new level of collaborative engineering knowledge management, designed to facilitate sustainability and asset management issues in design, construction, asset management practices, and eventually decommissioning for the civil engineering industry.

  7. BIM: Enabling Sustainability and Asset Management through Knowledge Management

    Science.gov (United States)

    2013-01-01

    Building Information Modeling (BIM) is the use of virtual building information models to develop building design solutions and design documentation and to analyse construction processes. Recent advances in IT have enabled advanced knowledge management, which in turn facilitates sustainability and improves asset management in the civil construction industry. There are several important qualifiers and some disadvantages of the current suite of technologies. This paper outlines the benefits, enablers, and barriers associated with BIM and makes suggestions about how these issues may be addressed. The paper highlights the advantages of BIM, particularly the increased utility and speed, enhanced fault finding in all construction phases, and enhanced collaborations and visualisation of data. The paper additionally identifies a range of issues concerning the implementation of BIM as follows: IP, liability, risks, and contracts and the authenticity of users. Implementing BIM requires investment in new technology, skills training, and development of new ways of collaboration and Trade Practices concerns. However, when these challenges are overcome, BIM as a new information technology promises a new level of collaborative engineering knowledge management, designed to facilitate sustainability and asset management issues in design, construction, asset management practices, and eventually decommissioning for the civil engineering industry. PMID:24324392

  8. Sustainable Supply Chain Management Implementation–Enablers and Barriers in the Textile Industry

    Directory of Open Access Journals (Sweden)

    Nelly Oelze

    2017-08-01

    Full Text Available The distinct definition of accordance in the perceived barriers and enablers for sustainable supply chain management (SSCM policy implementation has been the subject of various research studies, but a distinct focus on the textile sector has been the object of limited previous attention. However, it has been found that it affects the approach to developments in company approaches to sustainable supply chain management within that industry. This article presents the results of an in-depth comparative case study analysis, drawing on 23 interviews with managers of 10 companies from the textile industry. The analysis demonstrates that specific modes of collaboration can both enable an effective SSCM and diminish barriers for policy implementation. The width and depth varies between a collaborative management approach for an effective internal SSCM versus industry collaboration and buyer supplier collaboration to address external barriers and enablers.

  9. Fifteenth National Industrial Energy Technology Conference: Proceedings

    International Nuclear Information System (INIS)

    1993-01-01

    This year's conference, as in the past, allows upper-level energy managers, plant engineers, utility representatives, suppliers, and industrial consultants to present and discuss novel and innovative ideas on how to reduce costs effectively and improve utilization of resources. Papers are presented on topics that include: Win-win strategies for stability and growth and future success, new generation resources and transmission issues, industry and utilities working together, paper industry innovations, improving energy efficiency, industrial customers and electric utilities regulations, industrial electro technologies for energy conservation and environmental improvement, advances in motors and machinery, industrial energy audits, industrial energy auditing, process improvements, case studies of energy losses, and industrial heat pump applications. Individual papers are indexed separately

  10. Industries and environment - 2014 edition

    International Nuclear Information System (INIS)

    Maurice, Delphine

    2014-04-01

    After a general overview of the French economic context (composition of the French industry, the manufacturing industry, industry production and trade balance), this report presents industrial installations with risks: installations classified for the protection of the environment and submitted to industrial authorizations (ICPEA), basic nuclear installations, Seveso industrial facilities, IPPC industrial installations. The next part analyzes the various pressures exerted by the industry on the environment: material production and consumption, water taking, consumption of energetic products, release of pollutants in waters of industrial ICPE, releases in the air, greenhouse gas emissions, production of wastes, accidents and incidents with environmental consequences, polluted sites and soils, hazardous chemical products in the industry, industrial companies involved in nano-technologies and nano-materials. The last part proposes an overview of responses to these issues: implementation of environmental management system, corporate societal responsibility, investments and expenditures for the protection of the environment, industrial eco-activities, eco-labelled products manufactured by the industry

  11. Issues in recycling galvanized scrap

    Energy Technology Data Exchange (ETDEWEB)

    Koros, P.J. [LTV Steel Co., Inc., Cleveland, OH (United States); Hellickson, D.A. [General Motors Corp., Detroit, MI (United States); Dudek, F.J. [Argonne National Lab., IL (United States)

    1995-02-10

    The quality of the steel used for most galvanizing (and tinplate) applications makes scrap derived from their production and use a premier solid charge material for steelmaking. In 1989 the AISI created a Task Force to define the issues and to recommend technologically and economically sound approaches to assure continued, unhindered recyclability of the growing volume of galvanized scrap. The AISI program addressed the treatment of full-sized industrial bales of scrap. The current, on-going MRI (US)--Argonne National Laboratory program is focused on ``loose`` scrap from industrial and post-consumer sources. Results from these programs, issues of scrap management from source to steel melting, the choices for handling zinc in iron and steelmaking and the benefits/costs for removal of zinc (and lead) from scrap prior to melting in BOF and foundry operations are reviewed in this paper.

  12. Scientific Approaches Of Management Of System Of Industrial Water Use In Ukraine

    OpenAIRE

    Olga Yarotskaya

    2011-01-01

    The main approaches are established for modernization of existing management system of industrial water use in Ukraine, the formation of innovative model of development of the industrial complex and the new state policy of ecologically balanced industrial water use.

  13. Multiple Case Study of Event Management Curricula and Industry Professionals' Expectations of New Graduates

    Science.gov (United States)

    Whitney, Premila A.

    2016-01-01

    The event management segment of the hospitality industry has experienced tremendous growth in recent years. As a result, demand for qualified event management professionals continues to increase. To help prepare qualified professionals for the event management industry, higher education institutions in the United States are now offering…

  14. Sustainable supply chain management practices in Indian automotive industry

    DEFF Research Database (Denmark)

    Mathivathanan, Deepak; Kannan, Devika; Haq, A. Noorul

    2018-01-01

    As one of the largest manufacturing sectors, the automotive industry has a deep impact on the society and environment. Automotive products provide mobility to millions and create jobs, but also threaten the environment. Consumer pressure, government regulations, and stakeholder demands for a comp......As one of the largest manufacturing sectors, the automotive industry has a deep impact on the society and environment. Automotive products provide mobility to millions and create jobs, but also threaten the environment. Consumer pressure, government regulations, and stakeholder demands...... into the traditional supply chain and that help an industry shift towards a sustainable supply chain are called SSCM practices. Firms have difficulty identifying the most useful practices and learning how these practices impact each other. Unfortunately, no existing research has studied the interrelated influences...... stakeholder perspectives are identified. The results reveal that management commitment towards sustainability and incorporating the triple bottom line approach in strategic decision making are the most influential practices for implementing the sustainable supply chain management. This study provides...

  15. Viral Management as a New Type of Enterprise Management in Coal Industry

    Directory of Open Access Journals (Sweden)

    Garafonova Olga

    2017-01-01

    Full Text Available The article considers the evolution of the concept of “management”. The Internet analysis of the concept of “viral management” was conducted, the results of which testify to the positive trend, the growing interest in scientific circles, the relevance of the chosen direction for further research and the increasing popularity of the viral management among business leaders. The indices of coal and brown coal extraction in Ukraine and Russia for 2010-2016 are analyzed. Among the problems that exist in the coal industry are the following: mine assets have a high degree of deterioration; the equipment is rather obsolete and does not correspond to the world level; among the existing face equipment, the specific weight of longwall mining equipment, road headers, loading machines, and belt conveyors of the new generation is only several percent. Five steps of introduction of the virus management at the enterprise are identified: opening, development, participation, diffusion, sustainability. The principles of introduction of the viral management in the enterprises of the coal industry are offered. It is established that the main idea of the viral management is to “infect” the organization and, mainly, employees with one or another “virus” in the form of a common idea or goal. It is indicated that the viral management assumes a certain automaticity of changes, internal “obsession” with this or other innovation, involvement of an informal personal factor.

  16. International waste-management symposium

    International Nuclear Information System (INIS)

    Shoup, R.L.

    1977-01-01

    An International Symposium on the Management of Wastes from the LWR Fuel Cycle was held in Denver, Colo., on July 11 to 16, 1976. The symposium covered a broad range of topics, from policy issues to technology. Presentations were made by national and international speakers involved in all aspects of waste management, government and agency officials; laboratory managers, directors, and researchers; and industrial representatives. Many speakers advocated pragmatic action on programs for the management of commercial nuclear wastes to complete the light-water reactor (LWR) fuel cycle. The industrialized nations' demand for increasing supplies of energy and their increasing dependence on nuclear energy to fulfill this demand will necessitate the development of an acceptable solution to the disposal of nuclear wastes within the next decade for some industrial nations. Waste-disposal technology should be implemented on a commercial scale, but the commercialization must be accompanied by the decision to use the technology. An important issue in the use of nuclear energy is the question of sharing the technology with the less industrialized nations and with nations that may not have suitable means to dispose of nuclear wastes. The establishment of international and multinational cooperation will be an important key in realizing this objective. Pressing issues that international organizations or task groups will have to address are ocean disposal, plutonium recycling and safeguards, and disposal criteria. The importance of achieving a viable waste-management program is made evident by the increased funding and attention that the back end of the fuel cycle is now receiving

  17. Current Issues for Higher Education Information Resources Management.

    Science.gov (United States)

    CAUSE/EFFECT, 1996

    1996-01-01

    Issues identified as important to the future of information resources management and use in higher education include information policy in a networked environment, distributed computing, integrating information resources and college planning, benchmarking information technology, integrated digital libraries, technology integration in teaching,…

  18. Solid waste management practices in wet coffee processing industries of Gidabo watershed, Ethiopia.

    Science.gov (United States)

    Ulsido, Mihret D; Li, Meng

    2016-07-01

    The financial and social contributions of coffee processing industries within most coffee export-based national economies like Ethiopia are generally high. The type and amount of waste produced and the waste management options adopted by these industries can have negative effects on the environment. This study investigated the solid waste management options adopted in wet coffee processing industries in the Gidabo watershed of Ethiopia. A field observation and assessment were made to identify whether the operational characteristics of the industries have any effect on the waste management options that were practiced. The investigation was conducted on 125 wet coffee processing industries about their solid waste handling techniques. Focus group discussion, structured questionnaires, key informant interview and transect walks are some of the tools employed during the investigation. Two major types of wastes, namely hull-bean-pulp blended solid waste and wastewater rich in dissolved and suspended solids were generated in the industries. Wet mills, on average, released 20.69% green coffee bean, 18.58% water and 60.74% pulp by weight. Even though these wastes are rich in organic matter and recyclables; the most favoured solid waste management options in the watershed were disposal (50.4%) and industrial or household composting (49.6%). Laxity and impulsive decision are the driving motives behind solid waste management in Gidabo watershed. Therefore, to reduce possible contamination of the environment, wastes generated during the processing of red coffee cherries, such as coffee wet mill solid wastes, should be handled properly and effectively through maximisation of their benefits with minimised losses. © The Author(s) 2016.

  19. NEW DETERMINANT FACTORS OF CHANGE MANAGEMENT IN THE HOSPITALITY INDUSTRY

    Directory of Open Access Journals (Sweden)

    Eugenia ALECU

    2013-12-01

    Full Text Available The factors that we took into account the following important elements: for goods and capital (brand promotion, reliable predictions against risk factors, knowledge capital, intangible values for hotels, for health and safety (the easily with which diseases can cross oceans and borders and multiplying rows of old and new infections, some impossible to treat, strict control of food and non-food products entering in the hotel, for new management (planning education and training process in hospitality industry, demographic problem, New trends in the workplace. One of the most dramatic changes in this industry is the way to sold products and services for public hotels. New technology, development of hospitality industry and social problems are very important, also in this process of change management to hotels.

  20. Quality management benchmarking: FDA compliance in pharmaceutical industry.

    Science.gov (United States)

    Jochem, Roland; Landgraf, Katja

    2010-01-01

    By analyzing and comparing industry and business best practice, processes can be optimized and become more successful mainly because efficiency and competitiveness increase. This paper aims to focus on some examples. Case studies are used to show knowledge exchange in the pharmaceutical industry. Best practice solutions were identified in two companies using a benchmarking method and five-stage model. Despite large administrations, there is much potential regarding business process organization. This project makes it possible for participants to fully understand their business processes. The benchmarking method gives an opportunity to critically analyze value chains (a string of companies or players working together to satisfy market demands for a special product). Knowledge exchange is interesting for companies that like to be global players. Benchmarking supports information exchange and improves competitive ability between different enterprises. Findings suggest that the five-stage model improves efficiency and effectiveness. Furthermore, the model increases the chances for reaching targets. The method gives security to partners that did not have benchmarking experience. The study identifies new quality management procedures. Process management and especially benchmarking is shown to support pharmaceutical industry improvements.

  1. Organizational-economic mechanism of management of food industry enterprises competitiveness

    Directory of Open Access Journals (Sweden)

    O.A. Gorb

    2016-09-01

    Full Text Available The article is devoted to the discussion of the peculiarities of the formation of organizational-economic mechanism of food industry enterprise management. Brief characteristics of social-economic environment of functioning the enterprises of the industry have been given for determining its desirable parameters. The characteristics of challenges to the competitive positions of Ukrainian enterprises in the connection with the country's entry to the “free trade” zone with the European Union have also been given. The authors consider the solving of the touched upon problem in the combination of competitiveness management functions and preventive anti-crisis management in the single mechanism. The structure of such mechanism has been suggested, and the characteristics of its components have been given.

  2. International divestment and restructuring decisions (with special reference to the motor industry).

    OpenAIRE

    Casson M

    1986-01-01

    ILO pub. Working paper on specific industry restructuring and plant shutdown in the motor vehicle industry in Western Europe - discusses industrial policy issues, enterprise level decision making, production, management, marketing, and the need for rationalization and economies of scale; includes a case study of Peugeot's acquisition of Chrysler. Bibliography, statistical tables.

  3. Adaptive management of natural resources-framework and issues

    Science.gov (United States)

    Williams, B.K.

    2011-01-01

    Adaptive management, an approach for simultaneously managing and learning about natural resources, has been around for several decades. Interest in adaptive decision making has grown steadily over that time, and by now many in natural resources conservation claim that adaptive management is the approach they use in meeting their resource management responsibilities. Yet there remains considerable ambiguity about what adaptive management actually is, and how it is to be implemented by practitioners. The objective of this paper is to present a framework and conditions for adaptive decision making, and discuss some important challenges in its application. Adaptive management is described as a two-phase process of deliberative and iterative phases, which are implemented sequentially over the timeframe of an application. Key elements, processes, and issues in adaptive decision making are highlighted in terms of this framework. Special emphasis is given to the question of geographic scale, the difficulties presented by non-stationarity, and organizational challenges in implementing adaptive management. ?? 2010.

  4. Evaluating the Management System Approach for Industrial Energy Efficiency Improvements

    Directory of Open Access Journals (Sweden)

    Thomas Zobel

    2016-09-01

    Full Text Available Voluntary environmental management systems (EMS based on the international standard ISO 14001 have become widespread globally in recent years. The purpose of this study is to assess the impact of voluntary management systems on energy efficiency in the Swedish manufacturing industry by means of objective industrial energy data derived from mandatory annual environmental reports. The study focuses on changes in energy efficiency over a period of 12 years and includes both ISO 14001-certified companies and non-certified companies. Consideration is given to energy improvement efforts in the companies before the adoption of ISO 14001. The analysis has been carried out using statistical methods for two different industrial energy parameters: electricity and fossil fuel consumption. The results indicate that ISO 14001 adoption and certification has increased energy efficiency regarding the use of fossil fuel. In contrast, no effect of the management systems has been found concerning the use of electricity. The mixed results of this study are only partly in line with the results of previous studies based on perceptions of company representatives.

  5. Two incidents that changed quality management in the Australian livestock export industry

    Directory of Open Access Journals (Sweden)

    Peter R. Stinson

    2008-03-01

    Full Text Available Quality assurance in Australia's livestock export industry arose from a need to address animal welfare concerns. It was initially instigated by industry in the form of an accreditation scheme which contained standards, auditing requirements and training requirements. Two major incidents in long haul shipping of livestock demonstrated that risk management in the industry cannot be achieved through compliance with standards alone. A thorough investigation of the first incident recommended the introduction of formal risk management to complement a standards regime. This approach is applicable to the management of major risks, such as heat stress and disease. It is also especially suited to commercial risks, such as the rejection of cargo and where voyage or market specific treatments are needed and depend upon the expertise of the exporter. However, before these recommendations on risk management could be fully implemented, a significant public incident occurred which altered the direction of quality assurance in industry. The Australian response was to transfer authority to government regulators with a tightening of standards. This focuses on the need to ensure ownership of quality assurance programmes by the exporter. Formal risk management has been a casualty of the second incident and, unfortunately, has not been introduced.

  6. "Protected biological control"- Biological pest management in the greenhouse industry

    NARCIS (Netherlands)

    Pilkington, L.J.; Messelink, G.J.; Lenteren, van J.C.; Mottee, Le K.

    2010-01-01

    This paper briefly describes the foundations and characteristics of biological control in protected cropping and what drivers are behind adoption of this management system within this industry. Examining a brief history of biological control in greenhouses and what makes it a successful management

  7. Industrial Hazardous Waste Management In Egypt-the baseline study: An Updated review

    International Nuclear Information System (INIS)

    Farida M, S.

    1999-01-01

    Increased industrialization over the past decades in Egypt has resulted in an increased and uncontrolled generation of industrial hazardous waste. This was not accompanied by any concerted efforts to control these wastes. Consequently, no system for handling or disposing of industrial wastes, in general, and industrial hazardous wastes, in specific, exists. In 1993, a baseline report was formulated to assess the overall problem of industrial hazardous waste management in Egypt. Consequently, recommendations for priority actions were identified and the main components of a national hazardous waste system under the provision of Law 4/ 1994 were presented. This paper provides an updated review of this report in light of the proposed technical, legal and institutional guidelines to help in the realization of such a needed waste management system in Egypt

  8. Quality Management in Reverse Logistics A Broad Look on Quality Issues and Their Interaction with Closed-Loop Supply Chains

    CERN Document Server

    2013-01-01

    The concepts of Quality Management (QM) have been used for a long time by manufacturing companies to ensure customers receive a constant and high quality level of products. But what happens with remanufactured or refurbished products?   Quality Management in Reverse Logistics: A Broad Look on Quality Issues and Their Interaction with Closed-Loop Supply Chains discusses the new, promising area of QM and Reverse Logistics interaction. More specifically, it examines and evaluates a number of QM tools and techniques, which can be applied in practice in order to understand, review and improve any closed-loop supply chain process.   Modeling and quantitative methods that can be used by students, practitioners and academics in the Reverse Logistics industry are described. The readers will broaden their scope of thinking in the area of Reverse Logistics, where Quality Management can be applied.

  9. Investigating the turnover of middle and senior managers in the pharmaceutical industry in South Africa

    Directory of Open Access Journals (Sweden)

    Abofele Khoele

    2014-08-01

    Full Text Available Orientation: Today, knowledge is a commodity and thus skilled knowledge workers, particularly in management positions, are vital for organisations’ success; their increased turnover has an adverse effect on productivity and profitability. High staff turnover is a cause for alarm, not only because of the costs associated with recruitment, selection and training, but also due to the increasing scarcity of experienced talent. Research purpose: This research investigates the reasons for the turnover of middle and senior managers in the pharmaceutical industry in South Africa in order to identify the possible reasons and formulate solutions to address the issue. Motivation for the study: In South Africa, employment, retention and turnover occur against the backdrop of a history of discrimination and inequality and attempts by government and organisations at redress. The significance of this background cannot be underestimated. Research approach, design and method: This study was qualitative and inductive to allow dominant themes to emerge from the raw data. Data was collected through in-depth, semi-structured one-on-one interviews as well as a review of company turnover reports and employment equity reports. Main findings: The study found that in the sampled organisations, employee turnover averaged almost 22% per annum between 2007 and 2010. Reasons for the turnover include a range of industry, company and personal factors. Practical/managerial implications: The overall turnover rate remains high, particularly amongst black knowledge workers, the attraction, recruitment and retention of whom is as important for addressing historical inequities in the local industry as it is for ensuring the diversity that companies need to reach a bigger market and gain a competitive edge. Further, as government is a significant purchaser of pharmaceutical goods and services, companies must ensure that the required Black Economic Empowerment (BEE rating level is

  10. Quality management certification for the nuclear industry

    International Nuclear Information System (INIS)

    Wilmer, T.J.

    1993-01-01

    Historically for safety critical items, the United Kingdom nuclear companies either conducted their own inspection and audit of suppliers or sub-contracted staff to do so on their behalf. However, it is becoming unrealistic for these services to be undertaken in-house for economic reasons. The power industry is looking outside its own immediate expertise to that of 3rd Party Certification Bodies. There is a danger of introducing an element of risk unless the Certification Body really does understand the industry and its requirements. The Nuclear Installations Inspectorate (NII) makes it mandatory for nuclear installations to have in place Quality management systems that meet the requirements of BS 5882. This standard requires the use of quality assurance programmes and a greater degree of understanding of nuclear regulations and codes of practice than is required by BS 5750. This is a very significant factor, recognising as it does the need to harmonise the management interface between an operator of a nuclear installation and suppliers to that same installation. (author)

  11. Socio-economic impacts between the nuclear industry and Aboriginal people

    International Nuclear Information System (INIS)

    Malcolm, D.G.

    1996-01-01

    The paper explores several aspects of the socio-economic impact of the nuclear industry on Aboriginal people in northern Canada. The issues discussed include decision-making by consensus, community-based development, the role of Traditional Ecological Knowledge and Management Systems (TEKMS), relationships with land and nature, and social and health issues. The issues are discussed with respect to the divergence between Aboriginal and non-Aboriginal cultures, which affect the timelines for project viability as well as the continued harmony between industry and community. It is concluded that economic gains can be achieved through continuous community dialogue from the moment of project inception. (author)

  12. Nurse managers' experience with ethical issues in six government hospitals in Malaysia: a cross-sectional study.

    Science.gov (United States)

    Musa, Maizura binti; Harun-Or-Rashid, M D; Sakamoto, Junichi

    2011-11-16

    Nurse managers have the burden of experiencing frequent ethical issues related to both their managerial and nursing care duties, according to previous international studies. However, no such study was published in Malaysia. The purpose of this study was to explore nurse managers' experience with ethical issues in six government hospitals in Malaysia including learning about the way they dealt with the issues. A cross-sectional study was conducted in August-September, 2010 involving 417 (69.2%) of total 603 nurse managers in the six Malaysian government hospitals. Data were collected using three-part self-administered questionnaire. Part I was regarding participants' demographics. Part II was about the frequency and areas of management where ethical issues were experienced, and scoring of the importance of 11 pre-identified ethical issues. Part III asked how they dealt with ethical issues in general; ways to deal with the 11 pre-identified ethical issues, and perceived stress level. Data were analyzed using descriptive statistics, cross-tabulations and Pearson's Chi-square. A total of 397 (95.2%) participants experienced ethical issues and 47.2% experienced them on weekly to daily basis. Experiencing ethical issues were not associated with areas of practice. Top area of management where ethical issues were encountered was "staff management", but "patient care" related ethical issues were rated as most important. Majority would "discuss with other nurses" in dealing generally with the issues. For pre-identified ethical issues regarding "patient care", "discuss with doctors" was preferred. Only 18.1% referred issues to "ethics committees" and 53.0% to the code of ethics. Nurse managers, regardless of their areas of practice, frequently experienced ethical issues. For dealing with these, team-approach needs to be emphasized. Proper understanding of the code of ethics is needed to provide basis for reasoning.

  13. Supply Chain Management in Retail Industry

    OpenAIRE

    Ivana Plazibat; Sladana Brajevic

    2009-01-01

    Companies attempt to change their ways of doing business to find out new approaches to customers. Internationalization and consolidation of retailing turned traditional retail industry upside down. Fast and efficient operational models and new technologies constantly challenge retailers. The term supply chain management (SCM) is relatively new in the literature, appearing first in 1982. Supply chain is a set of institutions that moves goods from the point of production to the point of consump...

  14. Industrial waste management information for 1990 and record-to-date

    International Nuclear Information System (INIS)

    Litteer, D.L.; Peterson, C.N.; Sims, A.M.

    1991-08-01

    This product provides detailed data and graphics on airborne and liquid effluent releases, fuel oil consumption, and water usage for the calendar year 1990. It summarizes industrial waste data records compiled since 1971 for the Idaho National Engineering Laboratory (INEL). The data presented are from the INEL Industrial Waste Management Information System (IWMIS)

  15. Manual for the classification and prioritization of risks due to major accidents in process and related industries. Inter-Agency programme on the assessment and management of health and environmental risks from energy and other complex industrial systems

    International Nuclear Information System (INIS)

    1996-11-01

    The IAEA, the United Nations Environment Programme (UNEP), the United Nations Industrial Development Organization (UNIDO) and the World Health Organization (WHO) decided in 1986 to join forces in order to promote the use of integrated areas wide approaches to risk management. The Inter-Agency Programme brings together expertise in health, the environment, industry and energy, all vital for effective risk management. The purpose of the Inter-Agency Programme is to develop a broad approach to the identification, prioritization and minimization of industrial hazards in a given geographical area. This is one of a series of publications intended to be issued on behalf of the four participating UN organizations. This is the first revision of the original report, distributed in December 1993. The revision was undertaken in the light of experience with the original edition and was prompted by the wish to add the results of a practical case study and some new developments. 13 figs, 23 tabs

  16. Importance of marketing management in the world pfarmaceutical industry

    OpenAIRE

    Dragan Kesič; Andrej Bertoncelj

    2008-01-01

    The world pharmaceutical industry has changed tremendously in the last decade. Globalization processes reinforce a consolidation of the world pharmaceutical industry. Mergers and acquisitions prevail more and more as a strategic orientation of numerous world pharmaceutical companies. In our research we found out that marketing management has been playing an increasingly important or even a crucial role in day-today activities and strategic business operations of the world pharmaceutical compa...

  17. Sustainability Management Program for Industries- A Case Study

    Directory of Open Access Journals (Sweden)

    Long Su Weng Alwin

    2017-01-01

    Full Text Available This research studied the effectiveness of Sustainability Management Program in improving production efficiency of the manufacturing site with verified result using the regression analysis. For this study, a dairy manufacturing industry located in Malaysia was selected and major energy consuming equipment in the industryplant were identified. Sustainability Management Program (SMP was carried out for three years and energy consumption and product has improved regression coefficients of 0.625 in 2013, 0.826 in 2014, and 0.878 in 2015 as the manufacturing site becomes more energy efficient. This suggests that the energy management should be carried out in a continuous manner with energy management team responsible for energy saving practices.

  18. Management: A bibliography for NASA managers (supplement 21)

    Science.gov (United States)

    1987-01-01

    This bibliography lists 664 reports, articles and other documents introduced into the NASA scientific and technical information system in 1986. Items are selected and grouped according to their usefulness to the manager as manager. Citations are grouped into ten subject categories: human factors and personnel issues; management theory and techniques; industrial management and manufacturing; robotics and expert systems; computers and information management; research and development; economics, costs, and markets; logistics and operations management; reliability and quality control; and legality, legislation, and policy.

  19. Cultural Issue and its Influence in the Management of Global Project Teams

    Directory of Open Access Journals (Sweden)

    Nadia Lima

    2016-04-01

    Full Text Available The interactions between the project manager and team members may be affected by several variables, such as culture, leadership style of the project manager, and the complexity of the developed tasks. Focused in this context, the objective of this paper is to investigate and describe how the culture issue can affect the anagement of global project teams. It is a qualitative, descriptive study conducted in a large multinational company in the automotive sector. The results of this research show that cultural issues can influence both positively and negatively the management of project global teams and the managers of these projects have to deal with several management challenges that require the adoption of certain ways of dealing with culture impacts in managing their teams to minimize potential problems in this context.

  20. Editorial safety science special issue road safety management.

    NARCIS (Netherlands)

    Wegman, F.C.M. & Hagezieker, M.P.

    2014-01-01

    The articles presented in this Special Issue on Road Safety Management represent an illustration of the growing interest in policy-related research in the area of road safety. The complex nature of this type of research combined with the observation that scientific journals pay limited attention to