WorldWideScience

Sample records for industry groundwater research

  1. GAS INDUSTRY GROUNDWATER RESEARCH PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    James A. Sorensen; John R. Gallagher; Steven B. Hawthorne; Ted R. Aulich

    2000-10-01

    The objective of the research described in this report was to provide data and insights that will enable the natural gas industry to (1) significantly improve the assessment of subsurface glycol-related contamination at sites where it is known or suspected to have occurred and (2) make scientifically valid decisions concerning the management and/or remediation of that contamination. The described research was focused on subsurface transport and fate issues related to triethylene glycol (TEG), diethylene glycol (DEG), and ethylene glycol (EG). TEG and DEG were selected for examination because they are used in a vast majority of gas dehydration units, and EG was chosen because it is currently under regulatory scrutiny as a drinking water pollutant. Because benzene, toluene, ethylbenzene, and xylenes (collectively referred to as BTEX) compounds are often very closely associated with glycols used in dehydration processes, the research necessarily included assessing cocontaminant effects on waste mobility and biodegradation. BTEX hydrocarbons are relatively water-soluble and, because of their toxicity, are of regulatory concern. Although numerous studies have investigated the fate of BTEX, and significant evidence exists to indicate the potential biodegradability of BTEX in both aerobic and anaerobic environments (Kazumi and others, 1997; Krumholz and others, 1996; Lovely and others, 1995; Gibson and Subramanian, 1984), relatively few investigations have convincingly demonstrated in situ biodegradation of these hydrocarbons (Gieg and others, 1999), and less work has been done on investigating the fate of BTEX species in combination with miscible glycols. To achieve the research objectives, laboratory studies were conducted to (1) characterize glycol related dehydration wastes, with emphasis on identification and quantitation of coconstituent organics associated with TEG and EG wastes obtained from dehydration units located in the United States and Canada, (2) evaluate

  2. Groundwater Molybdenum from Emerging Industries in Taiwan.

    Science.gov (United States)

    Tsai, Kuo-Sheng; Chang, Yu-Min; Kao, Jimmy C M; Lin, Kae-Long

    2016-01-01

    This study determined the influence of emerging industries development on molybdenum (Mo) groundwater contamination. A total of 537 groundwater samples were collected for Mo determination, including 295 samples from potentially contaminated areas of 3 industrial parks in Taiwan and 242 samples from non-potentially contaminated areas during 2008-2014. Most of the high Mo samples are located downstream from a thin film transistor-liquid crystal display (TFT-LCD) panel factory. Mean groundwater Mo concentrations from potentially contaminated areas (0.0058 mg/L) were significantly higher (p industry and following wastewater batch treatment were 0.788 and 0.0326 mg/L, respectively. This indicates that wastewater containing Mo is a possible source of both groundwater and surface water contamination. Nine samples of groundwater exceed the World Health Organization's suggested drinking water guideline of 0.07 mg/L. A non-carcinogenic risk assessment for Mo in adults and children using the Mo concentration of 0.07 mg/L yielded risks of 0.546 and 0.215, respectively. These results indicate the importance of the development of a national drinking water quality standard for Mo in Taiwan to ensure safe groundwater for use. According to the human health risk calculation, the groundwater Mo standard is suggested as 0.07 mg/L. Reduction the discharge of Mo-contaminated wastewater from factories in the industrial parks is also the important task in the future.

  3. Technical note: Guide to groundwater monitoring for the coal industry

    African Journals Online (AJOL)

    It is well established in literature that the environmental impacts associated with the coal industry are numerous. In respect of South Africa's groundwater resources the major impact of the coal industry is a reduction in groundwater quantity and quality. There is therefore a need to proactively prevent or minimise these ...

  4. The Effects of Leachate on Groundwater in Ota Industrial Area ...

    African Journals Online (AJOL)

    Compositions of landfill leachate and groundwater pollution were studied at industrial sites landfill, which are located at Ota, Nigeria. The leachate was sampled at 5 different locations at the landfill, and at 15 and 20 m downstream of the landfill. Groundwater samples were collected from 10 different sources to study the ...

  5. Biomarkers study in rainbow trout exposed to industrially contaminated groundwater

    Directory of Open Access Journals (Sweden)

    Nadjet Benchalgo

    2014-03-01

    Full Text Available The spill of liquid industrial waste from chemical and petrochemical industries in Mercier lagoons located 20 km south of Montreal, Quebec, caused a major groundwater contamination by industrial contaminants. The aim of this study was to investigate the toxic effects of Mercier groundwater, following 4 and 14 days of exposure to graded concentrations from three wells at increasing distances 1.2, 2.7 and 5.4 km from the source of contamination. Rainbow trout were examined for several biomarkers of defense [ethoxyresorufin O-deethylase (EROD and gluthatione S-transferase (GST activities] and those of tissue damage [lipid peroxidation (LPO and DNA strand breaks]. The results showed that EROD activity was significantly enhanced in hepatic tissue at 1.2 and 5.4 km, whereas inhibition in activity was observed in group at 2.7 km. Therefore, GST activity was significantly increased at 3.1% concentration for the 2.7 km well. No change in LPO was observed. However, a significant induction of DNA strand breaks in liver was obtained at each distance. In conclusion, the data suggest that the release of these contaminants in groundwater leads to increased biotransformation for coplanar aromatic hydrocarbons and DNA damage in groundwater.

  6. The effect of industrial effluent stream on the groundwater

    International Nuclear Information System (INIS)

    Yasar, A.; Ahmad, N.; Chaudhry, M.N.; Sarwar, M.

    2005-01-01

    This study was performed to investigate the effect of the industrial wastewater stream on the groundwater. Wastewater was characterized in terms of inorganic and organic constituents. Inorganic constituents included Na/sup +/, Ca/sup 2+/ K/sup +/, Cl/sup -/, NO/sub 3//sup -/ and SO/sub 4//sup 2-/ coupled with heavy metal elements such as, Cd, Cr, Pb, Mn, Cu, Ni, Fe and In. Organic load of the stream was determined in terms of chemical oxygen demand (COD), biological oxygen demand (BOD/sub 5/) and ammonia-nitrogen (NH/sub 3/-N) contents. Other characteristics were pH, electrical conductivity (EC) and total dissolved solids (TDS). The correlation coefficients between quality parameter pairs of stream water and groundwater were determined to ascertain the source of groundwater contamination. At station 1, BOD/sub 5/ and COD contents were 20 times and Cr concentration was 10 times higher than the permissible limits for stream water [1]. Contents of these parameters reflected the level of industrial and domestic pollution coming from India. However, large variations in the levels of these parameters at down stream sites of the drain were characteristic of type and nature of industrial effluents and domestic sewage joining the stream. Analysis results of more than one hundred groundwater samples from shallow and deep wells around the drain showed that groundwater of shallow aquifers was contaminated due to drain water. A comparison of the contents of these parameters in shallow wells with WHO standards showed that some parameters such as turbidity, TDS, Na/sup +/, F -and heavy metals like Cr were found higher than the permissible limits. (author)

  7. Design research and industrial applicability

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    1997-01-01

    Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry.......Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry....

  8. Forest industries energy research

    Energy Technology Data Exchange (ETDEWEB)

    Scott, G. C.

    1977-10-15

    Data on energy use in the manufacturing process of the wood products industry in 1974 are tabulated. The forest industries contributed 10% of New Zealand's factory production and consumed 25% of all industrial energy (including that produced from self-generated sources such as waste heat liquors and wood wastes) in that year. An evaluation of the potential for savings in process heat systems in existing production levels is shown to be 3% in the short, medium, and long-term time periods. The industry has a high potential for fuel substitution in all sectors. The payback periods for the implementation of the conservation measures are indicated.

  9. Research advances in industrial engineering

    CERN Document Server

    2015-01-01

    This book provides discussions and the exchange of information on principles, strategies, models, techniques, methodologies and applications of industrial engineering. It communicates the latest developments and research activity on industrial engineering and is useful for all those interested in the technological challenges in the field.

  10. Research partnerships between business researchers and industry

    NARCIS (Netherlands)

    Zalewska-Kurek, Katarzyna; Janßen, Björn; Harms, Rainer

    2016-01-01

    We study the strategic behaviour of management researchers when establishing research partnerships with industry. To this end we developed a framework distinguishing ‘strategic planned’ and ‘opportunity-driven’ behaviour in the process of establishing and managing research partnerships. We also

  11. Industry sponsorship and research outcome

    DEFF Research Database (Denmark)

    Lundh, Andreas; Sismondo, Sergio; Lexchin, Joel

    2012-01-01

    Clinical research affecting how doctors practice medicine is increasingly sponsored by companies that make drugs and medical devices. Previous systematic reviews have found that pharmaceutical industry sponsored studies are more often favorable to the sponsor's product compared with studies...

  12. Future research needs involving pathogens in groundwater

    Science.gov (United States)

    Bradford, Scott A.; Harvey, Ronald W.

    2017-01-01

    Contamination of groundwater by enteric pathogens has commonly been associated with disease outbreaks. Proper management and treatment of pathogen sources are important prerequisites for preventing groundwater contamination. However, non-point sources of pathogen contamination are frequently difficult to identify, and existing approaches for pathogen detection are costly and only provide semi-quantitative information. Microbial indicators that are readily quantified often do not correlate with the presence of pathogens. Pathogens of emerging concern and increasing detections of antibiotic resistance among bacterial pathogens in groundwater are topics of growing concern. Adequate removal of pathogens during soil passage is therefore critical for safe groundwater extraction. Processes that enhance pathogen transport (e.g., high velocity zones and preferential flow) and diminish pathogen removal (e.g., reversible retention and enhanced survival) are of special concern because they increase the risk of groundwater contamination, but are still incompletely understood. Improved theory and modeling tools are needed to analyze experimental data, test hypotheses, understand coupled processes and controlling mechanisms, predict spatial and/or temporal variability in model parameters and uncertainty in pathogen concentrations, assess risk, and develop mitigation and best management approaches to protect groundwater.

  13. Future research needs involving pathogens in groundwater

    Science.gov (United States)

    Bradford, Scott A.; Harvey, Ronald W.

    2017-06-01

    Contamination of groundwater by enteric pathogens has commonly been associated with disease outbreaks. Proper management and treatment of pathogen sources are important prerequisites for preventing groundwater contamination. However, non-point sources of pathogen contamination are frequently difficult to identify, and existing approaches for pathogen detection are costly and only provide semi-quantitative information. Microbial indicators that are readily quantified often do not correlate with the presence of pathogens. Pathogens of emerging concern and increasing detections of antibiotic resistance among bacterial pathogens in groundwater are topics of growing concern. Adequate removal of pathogens during soil passage is therefore critical for safe groundwater extraction. Processes that enhance pathogen transport (e.g., high velocity zones and preferential flow) and diminish pathogen removal (e.g., reversible retention and enhanced survival) are of special concern because they increase the risk of groundwater contamination, but are still incompletely understood. Improved theory and modeling tools are needed to analyze experimental data, test hypotheses, understand coupled processes and controlling mechanisms, predict spatial and/or temporal variability in model parameters and uncertainty in pathogen concentrations, assess risk, and develop mitigation and best management approaches to protect groundwater.

  14. The local groundwater regime at the Harwell research site

    International Nuclear Information System (INIS)

    Alexander, J.; Holmes, D.C.

    1983-01-01

    Three deep and two shallow boreholes have been drilled at the Harwell Research Site as part of a national research programme into the feasibility of disposal of low and intermediate level radioactive wastes to geologic formations. Various hydrogeological and geochemical techniques have been employed in these boreholes, each of which samples a separate formation of interest, to determine the pattern of groundwater movement under the research site. Significant vertical hydraulic gradients have been identified which produce vertically downwards groundwater movement from the surface to a depth of 200 m (Corallian aquifer). Groundwater moves vertically upwards, from greater depths, through the Oxford Clay to the Corallian aquifer. However,the apparently very low hydraulic conductivity of the Oxford Clay results in extremely low flow velocities and long transit times. Groundwaters from the Corallian formation possess higher salinities than those of the characteristic regional groundwaters, and preliminary isotopic data suggest that some groundwater mixing with connate waters has occurred. The chemical nature of groundwaters from the Great Oolite Group, suggest that contamination due to the drilling and completion procedure has taken place. Due to the low hydraulic conductivity in this formation clearance of contaminants will require the implementation of a long-term abstraction programme. (author)

  15. Industry sponsorship and research outcome

    DEFF Research Database (Denmark)

    Lundh, Andreas; Lexchin, Joel; Mintzes, Barbara

    2017-01-01

    BACKGROUND: Clinical research affecting how doctors practice medicine is increasingly sponsored by companies that make drugs and medical devices. Previous systematic reviews have found that pharmaceutical-industry sponsored studies are more often favorable to the sponsor's product compared...... on the association between sponsorship and research outcome. OBJECTIVES: To investigate whether industry sponsored drug and device studies have more favorable outcomes and differ in risk of bias, compared with studies having other sources of sponsorship. SEARCH METHODS: In this update we searched MEDLINE (2010......, systematic reviews and meta-analyses that quantitatively compared primary research studies of drugs or medical devices sponsored by industry with studies with other sources of sponsorship. We had no language restrictions. DATA COLLECTION AND ANALYSIS: Two assessors screened abstracts and identified...

  16. Hydrochemical characteristic of surface and groundwater Lisichansk and Almazno-Marevske geological and industrial districts Nnorth-Eastern Donbas

    Directory of Open Access Journals (Sweden)

    Udalov Y.V.

    2014-12-01

    Full Text Available Incorporates a complex of problems accompanying the operation of coal deposits of Donbass. See hydrochemical characteristics of surface and groundwater Lisichansk and Almazno-Maryevskogo geological and industrial areas of the North-Eastern Donbass. Identified the main hydrochemical features of the waste mine waters of the enterprises of the coal industry on the territory of the studies. It is established that the surface waters of the study area exposed to intensive anthropogenic influence. Set content of basic elements-pollutants in surface waters. It is revealed that this pollution is of a complex nature. Identifies key elements contained in the effluent of industrial enterprises. Analyzed that a change of the chemical composition of groundwater has led to increased hardness and mineralization of water in the main water intakes of the research area. Identifies key elements-contaminants in groundwater. It was found that as a result of mine dewatering groundwater level fell over an area of 200km2, far exceeding the area of coal mining. This operational reserves fresh underground waters in the groundwater runoff module 1.2 dm3 / sec. km2 decreased by 200 - 300 m3 / day. Within funnel depression hydraulic connection is created not only a few confined aquifers, but also located near the mine fields. For example, in the area of Stakhanov the Luhansk region in general depression funnel width of about 25 km and a depth of 600-800m were 8 mine ("Central Irmino", "Maximovska" Ilyich, named after I.V. Chesnokov, "Krivoy Rog", 11-RAD "Brjankovsky" and "Dzerzhinsk". The purpose of research is general hydrochemical characteristics and identification of key elements polluting surface and groundwater Lisichanskiy and diamond-Marevskogo geological and industrial areas of the North-East Donbas.

  17. Research on flow characteristics of deep groundwater by environmental isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Shimada, Jun; Miyaoka, Kunihide [Tsukuba Univ., Ibaraki (Japan); Sakurai, Hideyuki; Senoo, Muneaki; Kumata, Masahiro; Mukai, Masayuki; Watanabe, Kazuo; Ouchi, Misao

    1996-01-01

    In this research, as the technique for grasping the behavior of groundwater in deep rock bed which is important as the factor of disturbing the natural barrier in the formation disposal of high level radioactive waste, the method of utilizing the environmental isotopes contained in groundwater as natural tracer was taken up, and by setting up the concrete field of investigation, through the forecast of flow by the two or three dimensional groundwater flow analysis using a computer, the planning and execution of water sampling, the analysis of various environmental isotopes, the interpretation based on those results of measurement and so on, the effectiveness of the investigation technique used was verified, and the real state of the behavior of deep groundwater in the district being studied was clarified. In this research, Imaichi alluvial fan located in northern Kanto plain was taken as the object. In fiscal year 1996, three-dimensional steady state groundwater flow simulation was carried out based on the data related to shallow groundwater and surface water systems, and the places where active groundwater flow is expected were selected, and boring will be carried out there. The analysis model and the results are reported. (K.I.)

  18. Knowledge sharing in industrial research

    NARCIS (Netherlands)

    Berends, J.J.

    2003-01-01

    Over the past decade, the field of organization studies has increasingly focused on knowledge and knowledge processes in organizations. This thesis describes a study of one of those processes, knowledge sharing, in the context of industrial research. Though the attention for knowledge in

  19. Groundwater contamination and risk assessment of industrial complex in Busan Metropolitan City, Korea

    Science.gov (United States)

    Hamm, S.-Y.; Ryu, S. M.; Cheong, J.-Y.; Woo, Y.-J.

    2003-04-01

    In Korea, the potential of groundwater contamination in urban areas is increasing by industrial and domestic waste waters, leakage from oil storage tanks and sewage drains, leachate from municipal landfill sites and so on. Nowadays, chlorinated organic compounds such as trichloroethylene (TCE) and tetrachloroethylene (PCE), which are driving residential area as well as industrial area, are recognized as major hazardous contaminants. As well known, TCE is wisely used industrial activities such as degreasing, metal stripping, chemical manufacturing, pesticide production, coal gasification plants, creosote operation, and also used in automobile service centers, photo shops and laundries as cleaning solvent. Thus, groundwater protection in urban areas is important issue in Korea This study is to understand groundwater quality and contamination characteristics and to estimate risk assessment in Sasang industrial complex, Busan Metropolitan City. Busan Metropolitan City is located on southeastern coast of the Korean peninsula and is the second largest city in South Korea with a population of 3.8 millions. The geology of the study area is composed of andesite, andesitic tuff, biotite granite and alluvium (Kim et al., 1998). However, geology cannot be identified on the surface due to pavement and buildings. According to drill logs in the study area, the geologic section consists in landfill, fine sand, clay, gravelly clay, and biotite granite from the surface. Biotite granite appears 5.5- 6 m depth. Groundwater samples were collected at twenty sites in Sasang industrial complex. The groundwater samples are plotted on Piper's trilinear diagram, which indicates Ca-Cl2 type. The groundwater may be influenced by salt water because Sasang industrial complex is located near the mouse of Nakdong river that flows to the South Sea. The Ca-Cl2 water type may be partly influenced by anthropogenic contamination in the study area, since water type in granite area generally belongs Ca

  20. Assessment of the Impact of Industrial Effluents on Groundwater Quality in Okhla Industrial Area, New Delhi, India

    Directory of Open Access Journals (Sweden)

    Wequar Ahmad Siddiqui

    2009-01-01

    Full Text Available In the present study physicochemical parameters like pH, hardness, TDS, chloride, sulphate, nitrate, fluoride, DO, COD and conductivity of some important heavy metals such as iron, cobalt, cadmium, lead, mercury, chromium, selenium and arsenic were first analyzed in effluent water of Okhla industrial area phase-II and then groundwater of near by areas. Obtained values of effluent water were compared with ISI standard for effluent water discharge and groundwater values were compared with ISI and WHO drinking water standards. The result shows that discharge of untreated effluents by the industries is leading to contamination of groundwater of the surrounding areas. Lead, mercury, fluoride, TDS, sulphate was above the desirable limit in effluent water (ISI standard for effluent water discharge. Subsequent analysis of groundwater of nearby areas was rated as unacceptable for drinking because of presence of fluoride in all the samples above the desirable limit. Lead, mercury, cadmium, chloride was also detected in many samples.

  1. IMPACT OF LEATHER PROCESSING INDUSTRIES ON CHROMIUM CONCENTRATION IN GROUNDWATER SOUTH OF CHENNAI CITY, INDIA

    Science.gov (United States)

    Elango, L.; Brindha, K.; G. Rajesh, V.

    2009-12-01

    The groundwater quality is under threat due to disposal of effluents from a number of industries. Poor practice of treatment of wastes from tanning industries or leather processing industries lead to pollution of groundwater. This study was carried out with the objective of assessing the impact of tanneries on groundwater quality in Chromepet area which is a part of the metropolitan area of Chennai, Tamil Nadu, India. This area serves as the home town for a number of small and large scale tanning industries. People in certain parts of this area depend on the groundwater for their domestic needs as there is no piped drinking water supply system. Topographically this region is generally flat with gentle slope towards east and north east. The charnockite rocks occur as basement at the depth of about 15m from the surface of this area. Weathered charnockite rock occurs at the depth from 7m to 15m from the ground surface. The upper layer consists of loamy soil. Groundwater occurs in the unconfined condition at a depth from 0.5m to 5m. Thirty six groundwater samples were collected during March 2008 and the groundwater samples were analysed for their heavy metal (chromium) content using atomic absorption spectrophotometer. Bureau of Indian Standards (BIS) recommended the maximum permissible limit of chromium in drinking water as 0.05 mg/l. Considering this, it was found that 86% of the groundwater samples possessed concentration of chromium above the maximum permissible limit recommended by BIS. The tanneries use chrome sulphate to strengthen the leather and make it water repellent. The excess of chromium gets washed off and remains in the wastewater. This wastewater is disposed into open uncovered drains either untreated or after partial treatment. Thus the chromium leaches through the soil and reaches the groundwater table. Apart from this, there is also huge quantity of solid waste resulting from the hides and skins which are dumped off without suitable treatment. The

  2. Overview of soil and groundwater research activities of the American Petroleum Institute (API)

    International Nuclear Information System (INIS)

    Bauman, B.

    1992-01-01

    The American Petroleum Institute (API) is a trade association for the domestic petroleum industry in the USA, with over 2000 corporate and 5000 individual members. Subsurface research activities are managed by the API soil/groundwater technical task force, a committee made up of over 25 member company engineers, hydrologists, soil scientists, and chemists representing both the research and operations sectors of the petroleum industry. The research areas of the group have been divided into five principle areas: biodegradation processes, fate and transport, remediation, decision making tools for remediation, and detection/analytical methods. A summary of each of the current projects in these subject areas is presented

  3. Groundwater quality assessment of one former industrial site in Belgium using a TRIAD-like approach

    International Nuclear Information System (INIS)

    Crevecoeur, Sophie; Debacker, Virginie; Joaquim-Justo, Celia; Gobert, Sylvie; Scippo, Marie-Louise; Dejonghe, Winnie; Martin, Patrick; Thome, Jean-Pierre

    2011-01-01

    Contaminated industrial sites are important sources of pollution and may result in ecotoxicological effects on terrestrial, aquatic and groundwater ecosystems. An effect-based approach to evaluate and assess pollution-induced degradation due to contaminated groundwater was carried out in this study. The new concept, referred to as 'Groundwater Quality TRIAD-like' (GwQT) approach, is adapted from classical TRIAD approaches. GwQT is based on measurements of chemical concentrations, laboratory toxicity tests and physico-chemical analyses. These components are combined in the GwQT using qualitative and quantitative (using zero to one subindices) integration approaches. The TRIAD approach is applied for the first time on groundwater from one former industrial site located in Belgium. This approach will allow the classification of sites into categories according to the degree of contaminant-induced degradation. This new concept is a starting point for groundwater characterization and is open for improvement and adjustment. - Highlights: → This study presents the first application of the TRIAD approach on groundwater system. → Groundwater Quality TRIAD-like approach is based on measurements of chemical concentrations, laboratory toxicity tests and physico-chemical analyses. → None of the three TRIAD components could reliably predict the other one. - This study presents the first application of the TRIAD approach on groundwater system. None of the TRIAD components (chemistry, physico-chemistry and ecotoxicity) could reliably predict the other one.

  4. Soil and groundwater remediation through the program of energy research and development at Environment Canada

    International Nuclear Information System (INIS)

    Bacchus, P.

    2005-01-01

    Research and development in groundwater and soil remediation within the federal Program of Energy Research and Development (PERD) are conducted in the context of activities related to the oil and gas industry. Contamination of groundwater and soil by the oil and gas sector affects the health of ecosystems and the economic viability of impacted lands. This paper presented an outline of remediation research and development activities associated with PERD, as well as an overview of PERD's development of improved generic remediation technologies and approaches for use by industries. In addition, issues concerning the development of key guidelines, methods and protocols for use by regulators were discussed. Science and technology efforts within PERD contribute to the development of national standards and guidelines concerning public safety and environmental needs

  5. Lunar Industry & Research Base Concept

    Science.gov (United States)

    Lysenko, J.; Kaliapin, M.; Osinovyy, G.

    2017-09-01

    Currently, all main space industry players, such as Europe, USA, Russia, China, etc., are looking back again at the idea of Moon exploration building there a manned lunar base. Alongside with other world spacefaring nations, Yuzhnoye State Design Office with its long-time development experience, technological and intellectual potential, organized its own conceptual work on development of the Lunar Industry & Research Base. In the frames of conceptual project "Lunar Industrial & Research Base" were formed its appearance, preliminary configuration and infrastructure at different stages of operation, trajectory and flight scheme to the Moon, as well as terms of the project's realization, and main technical characteristics of the systems under development, such as space transportation system for crew and cargo delivery to lunar surface and return to Earth, standardized designs of lunar modules, lunar surface vehicles, etc. The "Lunar Industrial & Research Base" project's preliminary risk assessment has shown a high value of its overall risk due to the lack of reliable information about the Moon, technical risks, long-term development of its elements, very high financial costs and dependence on state support. This points to the fact that it is reasonable to create such a global project in cooperation with other countries. International cooperation will expand the capabilities of any nation, reduce risks and increase the success probability of automated or manned space missions. It is necessary to create and bring into operation practical mechanisms for long-term space exploration on a global scale. One of the ways to do this is to create a multinational agency which would include both state enterprises and private companies.

  6. Surface and groundwater management in the oil sands industry

    International Nuclear Information System (INIS)

    Dixon, D.G.; Barker, J.

    2004-02-01

    A study was conducted to examine the sublethal effects of oil sands constituents on gill and liver histopathology and fish reproduction. Field studies of food web dynamics were conducted using stable isotopes, including oil sands constituents degradation isotope studies. The objective was to determine changes in food web dynamics associated with reclamation methods and maturity using stable isotopes. The study related changes in toxicity to changes in ground and surface naphthenic acids concentration and composition. It also demonstrated the natural attenuation of toxic chemicals as they travel through groundwater to potential surface water receptors. A methodology was developed to assess the natural attenuation capacity for future situations involving process-affected groundwater of different chemistry with different critical potential contaminants such as sulphides, metals, and specific organics. The mobility and natural attenuation of process water chemicals migrating in groundwater was also assessed. tabs., figs

  7. Strengthening industry-research linkage for small scale industrial ...

    African Journals Online (AJOL)

    Strengthening industry-research linkage for small scale industrial development in Ghana - the relevance of scientific and technological information. ... Journal of Applied Science and Technology. Journal Home · ABOUT · Advanced Search ...

  8. A project on groundwater research inventory and classification to make groundwater visible

    Science.gov (United States)

    Cseko, Adrienn; Petitta, Marco; van der Keur, Peter; Fernandez, Isabel; Garcia Alibrandi, Clint; Hinsby, Klaus; Hartai, Eva; Garcia Padilla, Mercedes; Szucs, Peter; Mikita, Viktoria; Bisevac, Vanja; Bodo, Balazs

    2017-04-01

    Hydrogeology related research activities cover a wide spectrum of research areas at EU and national levels. The European knowledge base on this important topic is widespread and fragmented into broader programs generally related to waterresources, environment or ecology. In order to achieve a comprehensive understanding on the groundwater theme, the KINDRA project (Knowledge Inventory for Hydrogeology Research - www.kindraproject.eu) seeks to carry out an accurate assessment of the state of the art in hydrogeology research and to create a critical mass for scientific knowledge exchange of hydrogeology research, to ensure wide accessibility and applicability of research results, including support of innovation and development, and to reduce unnecessary duplication of efforts. The first two years of the project have focused its efforts in developing the concept of a Harmonized Terminology and Methodology for Classification and Reporting Hydrogeology related Research in Europe (HRCSYS) as well as its implementation in the European Inventory of Groundwater Research (EIGR). For developing the common terminology, keywords characterizing research on groundwater have been identified from two main sources: the most important EU directives and policy documents and from groundwater related scientific literature. To assess the importance and pertinence of the keywords, these have been ranked by performing searches via the Web of Science, Scopus and Google Scholar search engines. The complete merged list of keywords consisting of more than 200 terms has been organized in a tree hierarchy, identifying three main categories: Societal Challenges (SC), Operational Actions (OA) and Research Topics (RT). The relationships among these main categories expressed by a 3D approach, identifying single intersections among 5 main overarching groups for each category. The EIGR itself contains metadata (about 1800 records at the moment) of research efforts and topic related knowledge

  9. Groundwater flow in the Venice lagoon and remediation of the Porto Marghera industrial area (Italy)

    Science.gov (United States)

    Beretta, Giovanni Pietro; Terrenghi, Jacopo

    2017-05-01

    This study aims to determine the groundwater flow in a large area of the Venice (northeast Italy) lagoon that is under great anthropogenic pressure, which is influencing the regional flow in the surficial aquifer (about 30 m depth). The area presents several elements that condition the groundwater flow: extraction by means of drainage pumps and wells; tidal fluctuation; impermeable barriers that define part of the coastline, rivers and artificial channels; precipitation; recharge, etc. All the elements were studied separately, and then they were brought together in a numerical groundwater flow model to estimate the impact of each one. Identification of the impact of each element will help to optimise the characteristics of the Porto Marghera remediation systems. Longstanding industrial activity has had a strong impact on the soil and groundwater quality, and expensive and complex emergency remediation measures in problematic locations have been undertaken to ensure the continuity of industrial and maritime activities. The land reclamation and remediation works withdraw 56-74% of the water budget, while recharge from the river accounts for about 21-48% of the input. Only 21-42% of groundwater in the modelled area is derived from natural recharge sources, untouched by human activity. The drop of the piezometric level due to the realization of the upgradient impermeable barrier can be counteracted with the reduction of the pumping rate of the remediation systems.

  10. Research and development and industrial informatization

    International Nuclear Information System (INIS)

    1995-08-01

    This book deals with research and development and industrial informatization with development of technology international trend, the present conditions of scientific technology in the major nations, politics of technical development and trend, process of national research and development, research for industrial research and development, strengthen cooperation for scientific technology among nations, current situation and development of technology by field such as energy, software and system, and technology for industrial informatization.

  11. Isotopes in research and industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1961-01-15

    A comprehensive review of the present state of the use of radioisotopes in the physical sciences and industry was made at a major international conference in Copenhagen from 6 to 16 September 1960. The conference covers the use of radioisotopes in geophysics, metallurgy, solid state physics and nuclear physics, industrial applications of radioisotopes, which were divided into two groups, namely applications based on the tracer function of isotopes and those based on the penetration, absorption or scattering of radiation, use of isotopes in various branches of chemistry - from analysis to determine extremely small amounts of material to a study of the mechanism of various chemical reactions.

  12. Office of Industrial Technologies research in progress

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

  13. Orthopaedic research and education foundation and industry.

    Science.gov (United States)

    Wurth, Gene R; Sherr, Judy H; Coffman, Thomas M

    2003-07-01

    Members of orthopaedic industry commit a significant amount of funds each year to support research and education programs that are directly related to their product(s). In addition, industry supports organizations such as the Orthopaedic Research and Education Foundation. The relationship between the Orthopaedic Research and Education Foundation and industry began in the early 1980s. The support to the Orthopaedic Research and Education Foundation from industry primarily has come in the form of unrestricted grants. These grants best can be looked at as an investment rather than a contribution. This form of giving, once called corporate philanthropy is more accurately referred to as strategic philanthropy. Members of industry make these investments to enhance their reputations, build brand awareness, market their products and services, improve employee morale, increase customer loyalty, and establish strategic alliances. The specialty of orthopaedics is among the leaders in medicine in the amount of funding raised within the specialty for research and education programs. This is because of the amount of support from members of industry and the surgeons. During the past 15 years, 40% of the annual support to the Orthopaedic Research and Education Foundation has come from industry and the balance has come from surgeons and members of lay public. Future industry support of the Orthopaedic Research and Education Foundation and other organizations within the specialty of orthopaedics will be dependent on the continued demonstration of tangible returns in areas described.

  14. Coordinated research programme on the application of isotope techniques to investigate groundwater pollution final research coordination meeting and consultants' meeting. Final report

    International Nuclear Information System (INIS)

    Robinson, B.; Chilton, J.; Travi, Y.; Gerardo-Abaya, J.

    1998-02-01

    This document summarizes the IAEA Coordinated Research Programme (CRP) on the Application of Isotope Techniques to Investigate Groundwater Pollution. Summaries of 16 completed investigations are given. The completed investigations resulted to the application of 18 O, 2 H, 3 H, 13 C, 14 C, 34 S, 15 N and boron isotopes integrated to some extend with the classical hydrological tools. These studies have broadly confirmed the use of isotope techniques on two main ways: a) to assist in the interpretation of groundwater flow systems; b) to act as tracers of the origin and pathways of ta range of groundwater pollutants. Several important aspects have become clear in the CRP: it is advisable not to rely on single isotopes, but to combine where possible the use of more than one, particularly oxygen with nitrogen and sulfur; it is essential to integrate isotope techniques with conventional hydrochemistry; trace elements have an important role to play in an integrated approach to the interpretation of contamination sources and pathways. This CRP should be regarded as a stepping stone, considering that the magnitude of the problem of groundwater pollution is enormous in global terms. In order to have an impact on the understanding of groundwater pollution, the need is seen for follow-up by several CRPs targeted at specific areas or problems. Of priorities are: a) urban waste, both human and industrial; b) the origin of saline groundwater; and c) nitrate in groundwater in both agricultural and urban areas

  15. Addressing Responsible Research and Innovation to Industry

    DEFF Research Database (Denmark)

    Yaghmaei, Emad

    2015-01-01

    Responsible research and innovation (RRI) is taking a role to assist all types of stakeholders including industry to move research and innovation initiatives to responsible manner for tackling grand challenges. The literature on RRI focuses little on how industry can implement RRI principles...... models of corporate social responsibility (CSR) literature. Drawing on these models, this study develops stages and dimensions of RRI for discussing why industry should become engaged in RRI, how industry can embed RRI principles into research and innovation processes, how companies progress from one RRI....... In solving such gap in the literature, this article constructs a solid framework that provides a conceptual starting point for future research on levels of RRI. It draws a fundamental path to align industrial activities with environmental and societal needs. The framework develops a normatively grounded...

  16. From Global to Local and Vice Versa: On the Importance of the `Globalization' Agenda in Continental Groundwater Research and Policy-Making

    Science.gov (United States)

    Filimonau, Viachaslau; Barth, Johannes A. C.

    2016-09-01

    Groundwater is one of the most important environmental resources and its use continuously rises globally for industrial, agricultural, and drinking water supply purposes. Because of its importance, more knowledge about the volume of usable groundwater is necessary to satisfy the global demand. Due to the challenges in quantifying the volume of available global groundwater, studies which aim to assess its magnitude are limited in number. They are further restricted in scope and depth of analysis as, in most cases, they do not explain how the estimates of global groundwater resources have been obtained, what methods have been used to generate the figures and what levels of uncertainty exist. This article reviews the estimates of global groundwater resources. It finds that the level of uncertainty attached to existing numbers often exceeds 100 % and strives to establish the reasons for discrepancy. The outcome of this study outlines the need for a new agenda in water research with a more pronounced focus on groundwater. This new research agenda should aim at enhancing the quality and quantity of data provision on local and regional groundwater stocks and flows. This knowledge enhancement can serve as a basis to improve policy-making on groundwater resources globally. Research-informed policies will facilitate more effective groundwater management practices to ensure a more rapid progress of the global water sector towards the goal of sustainability.

  17. From Global to Local and Vice Versa: On the Importance of the 'Globalization' Agenda in Continental Groundwater Research and Policy-Making.

    Science.gov (United States)

    Filimonau, Viachaslau; Barth, Johannes A C

    2016-09-01

    Groundwater is one of the most important environmental resources and its use continuously rises globally for industrial, agricultural, and drinking water supply purposes. Because of its importance, more knowledge about the volume of usable groundwater is necessary to satisfy the global demand. Due to the challenges in quantifying the volume of available global groundwater, studies which aim to assess its magnitude are limited in number. They are further restricted in scope and depth of analysis as, in most cases, they do not explain how the estimates of global groundwater resources have been obtained, what methods have been used to generate the figures and what levels of uncertainty exist. This article reviews the estimates of global groundwater resources. It finds that the level of uncertainty attached to existing numbers often exceeds 100 % and strives to establish the reasons for discrepancy. The outcome of this study outlines the need for a new agenda in water research with a more pronounced focus on groundwater. This new research agenda should aim at enhancing the quality and quantity of data provision on local and regional groundwater stocks and flows. This knowledge enhancement can serve as a basis to improve policy-making on groundwater resources globally. Research-informed policies will facilitate more effective groundwater management practices to ensure a more rapid progress of the global water sector towards the goal of sustainability.

  18. Synchrotron radiation and industrial research

    International Nuclear Information System (INIS)

    Townsend, R.P.

    1995-01-01

    Fundamental studies on the properties of many different materials are of prime importance to most industrial concerns. For Unilever, solids (crystalline and amorphous), soft solids and complex fluids are the materials of primary interest. Synchrotron radiation has proved of great value for the analysis of a variety of such materials, because the intense and highly collimated radiation source has enabled us to obtain structural information rapidly as well as in time-resolved mode. In this paper are outlined the types of materials problems faced, and how we use different techniques to elucidate structure (both short and long range order) in zeolites, amorphous solids, as well as in biomaterials such as skin and hair containing lipid phases. Both equilibrium and time-resolved studies are described. (orig.)

  19. Data Assimilation for Management of Industrial Groundwater Contamination at a Regional Scale

    KAUST Repository

    El Gharamti, Mohamad

    2014-12-01

    Groundwater is one of the main sources for drinking water and agricultural activities. Various activities of both humans and nature may lead to groundwater pollution. Very often, pollution, or contamination, of groundwater goes undetected for long periods of time until it begins to a ect human health and/or the environment. Cleanup technologies used to remediate pollution can be costly and remediation processes are often protracted. A more practical and feasible way to manage groundwater contamination is to monitor and predict contamination and act as soon as there is risk to the population and the environment. Predicting groundwater contamination requires advanced numerical models of groundwater ow and solute transport. Such numerical modeling is increasingly becoming a reference criterion for water resources assessment and environmental protection. Subsurface numerical models are, however, subject to many sources of uncertainties from unknown parameters and approximate dynamics. This dissertation considers the sequential data assimilation approach and tackles the groundwater contamination problem at the port of Rotterdam in the Netherlands. Industrial concentration data are used to monitor and predict the fate of organic contaminants using a threedimensional coupled ow and reactive transport model. We propose a number of 5 novel assimilation techniques that address di erent challenges, including prohibitive computational burden, the nonlinearity and coupling of the subsurface dynamics, and the structural and parametric uncertainties. We also investigate the problem of optimal observational designs to optimize the location and the number of wells. The proposed new methods are based on the ensemble Kalman Filter (EnKF), which provides an e cient numerical solution to the Bayesian ltering problem. The dissertation rst investigates in depth the popular joint and dual ltering formulations of the state-parameters estimation problem. New methodologies, algorithmically

  20. Energy efficient industrialized housing research program

    Energy Technology Data Exchange (ETDEWEB)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-12-01

    This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

  1. Superconducting analogue electronics for research and industry

    International Nuclear Information System (INIS)

    Winkler, D

    2003-01-01

    This paper gives a brief review of superconducting electronics in research and industry. Examples will show how science benefits from the development and how superconducting devices have found their way into industry and to some commercial products. Impact in terms of enabling new research in other fields (e.g. radio astronomy, medicine), in industry (certification, safety, metrology, etc) and in terms of market will be addressed. From the examples, two fields will be emphasized: superconducting detectors for astronomy and the superconducting quantum interference devices (SQUIDs) employed for different applications

  2. University-Industry Collaboration in IS Research

    DEFF Research Database (Denmark)

    Schubert, Petra; Bjørn-Andersen, Niels

    2012-01-01

    of successful modes of collaboration. In this paper, we present the findings of the first qualitative in‐depth phase, in which we inter‐ viewed nine experienced researchers in order to understand the phenomenon of university‐ industry collaboration in the context of different research backgrounds. The findings...... from the preliminary interviews show that researchers have very differing individual preferences regarding the ideal setup of such collaborative research projects. They also show that design research and case study are the most common research methods in such projects. While peer‐ reviewed conference...... papers and journal articles are the most popular forms of academic output, reports and sessions with managers are the prevalent output for industry partners. This work is a precursor to a larger survey, which will allow us to study correlations between characteristics of researcher/project type...

  3. Research and chemical industry in 90's

    International Nuclear Information System (INIS)

    Trapasso, I.

    1992-01-01

    This paper examines the importance of research with respect to changes taking place within the chemical industry. Specific areas having a significant impact on the future evolution of the industry are identified. The chemical industry is highly R ampersand D intensive with respect to its overall sales volume, as well as, to R ampersand D levels in other industries; and R ampersand D has been a dominant factor influencing the restructuring, on a global scale, of this industry. In the 90's, the industry is expected to have a supply model which is based on the production of marketable high-technology products and integrated systems, developed through coordinated research in multi-disciplinary scientific fields. The optimum strategic and organizational strategies which are to be adopted by the industry during this decade are discussed with reference to the directions being taken by a large multi-national firm in developing strategies in various areas, e.g., new prime materials, environmental protection, pharmacology, and biotechnology. A look is given at recent developments in the sector of advanced polymers, with attention given to processes involving polymer genetics, new products with a wide range of applications and those offering a high level of environmental compatibility. A review of new materials development includes an assessment of prospects for biodegradable plastics based on natural carbohydrates

  4. Quantitative phase analysis in industrial research

    International Nuclear Information System (INIS)

    Ahmad Monshi

    1996-01-01

    X-Ray Diffraction (XRD) is the only technique able to identify phase and all the other analytical techniques give information about the elements. Quantitative phase analysis of minerals and industrial products is logically the next step after a qualitative examination and is of great importance in industrial research. Since the application of XRD in industry, early in this century, workers were trying to develop quantitative XRD methods. In this paper some of the important methods are briefly discussed and partly compared. These methods are Internal Standard, Known Additions, Double Dilution, External Standard, Direct Comparison, Diffraction Absorption and Ratio of Slopes

  5. Industry Participation in Defence Research and Development,

    Science.gov (United States)

    1983-12-01

    Research and Development: Proposals for Additional Incentives. ASTEC , 1990. K . Interaction between Industry, Higher Education and Government Laboratories...Incentives for Innovation in Australian Industry. ASTEC , 1983. P. Bibliography. Distribution Document Control Data Sheet AWA I A& I 14l2 p/O)OIP (02... ASTEC and the Senate Committee on Science and the Environment. My Department is already preparing advice for me in this regard and I shall ask them to

  6. Scenario research: The food industry in 2010

    DEFF Research Database (Denmark)

    Stacey, Julia; Sonne, Anne-Mette; Jensen, Birger Boutrup

    2001-01-01

    What kind of foods will the consumers choose to buy in 2010? Will they be buying organic foods, functional foods or go for the cheapest products? Nobody can predict the future. However, by using scenario techniques qualified indications on future developments can be put together. Researchers...... at MAPP and the Department of Manufacturing Engineering and Management, The Technical University of Denmark have constructed three scenarios about the Danish food industry in 2010. The aim has been to identify the demands the food industry can expect to meet in the future plus which research areas...... the public research should prioritise in order to support the development of competences within the food industry. The scenarios are isolated developments. In practise, the future is likely to be a combination of the different tendencies within the scenarios. The first scenario 'Naturalness' has focus...

  7. Geophysical investigation to reveal the groundwater condition at new Borg El-Arab industrial city, Egypt

    Science.gov (United States)

    Basheer, Alhussein A.; Mansour, Khamis Q.; Abdalla, Mohammed A.

    2014-12-01

    New Borg El-Arab City, 60 km to the southwest of Alexandria City, is one of new industrial cities planned by the Egyptian Government through its program to transfer the population from the condensed Nile Delta to other places in Egypt. Because such a city includes airport, huge buildings, factories, and worker settlements, a careful geophysical study is planned to reveal the groundwater condition. This will help in defining the places of wells that are supposed to be drilled. Therefore more industrial and agricultural activities will be flourished. The present study embraces Vertical Electrical Soundings (VES'es) and Time Domain Electromagnetic sounding (TEM) to investigate the study area. The study aims to delineate the main subsurface conditions from the viewpoint of groundwater location, depth and water quality. Analysis and interpretation of the obtained results reveal that the subsurface consists of five geoelectrical layers with a gentle general slope toward the Mediterranean Sea. The third and the fourth layers in the succession are suggested to be the two water bearing formations of which the third layer is saturated with fresh water overlying saline water at the bottom of the fourth one. It is worth mentioning that the fresh water depth varies between 50 and 354 m under the ground surface. The thickness of the fresh water aquifer varies from 9.5 to 66 m; and the saline water depth varies between 116 and 384 m below the ground surface, the thickness of saline water aquifer differs from 34 to 90.5 m.

  8. Industrial structure at research reactor suppliers

    International Nuclear Information System (INIS)

    Roegler, H.-J.; Bogusch, E.; Friebe, T.

    2001-01-01

    Due to the recent joining of the forces of Framatome S. A. from France and the Nuclear Division of Siemens AG Power Generation (KWU) from Germany to a Joint Venture named Framatome Advanced Nuclear Power S.A.S., the issue of the necessary and of the optimal industrial structure for nuclear projects as a research reactor is, was discussed internally often and intensively. That discussion took place also in the other technical fields such as Services for NPPs but also in the field of interest here, i. e. Research Reactors. In summarizing the statements of this presentation one can about state that: Research Reactors are easier to build than NPPs, but not standardised; Research Reactors need a wide spectrum of skills and experiences; to design and build Research Reactors needs an experienced team especially in terms of management and interfaces; Research Reactors need background from built reference plants more than from operating plants; Research Reactors need knowledge of suitable experienced subsuppliers. Two more essential conclusions as industry involved in constructing and upgrading research reactors are: Research Reactors by far are more than a suitable core that generates a high neutron flux; every institution that designs and builds a Research Reactor lacks quality or causes safety problems, damages the reputation of the entire community

  9. Government-University-Industry-Research Roundtable

    Energy Technology Data Exchange (ETDEWEB)

    1995-02-01

    Roundtable projects active during 1993 are described in this section. Projects completed in prior years are not included here, but publications resulting from them are included in the list of publications which are attached. Such prior projects include nurturing science and engineering talent, research facility financing, multidisciplinary research and education, university-industry-federal laboratory partnerships, and federal-state cooperation in science and technology.

  10. Strategic research field no.4, industrial innovations

    International Nuclear Information System (INIS)

    Kato, Chisachi

    2011-01-01

    'Kei'-supercomputer is planned to start its full-scale operation in about one year and a half. With this, High Performance Computing (HPC) is most likely to contribute not only to further progress in basic and applied sciences, but also to bringing about innovations in various fields of industries. It is expected to substantially shorten design time, drastically improve performance and/or liability of various industrial products, and greatly enhance safety of large-scale power plants. In this particle, six research themes, which are currently being prepared in this strategic research field, 'industrial innovations' so as to use 'Kei'-supercomputer as soon as it starts operations, will be briefly described regarding their specific goals and break-through that they are expected to bring about in industries. It is also explained how we have determined these themes. We are also planning several measures in order to promote widespread use of HPC including 'Kei'-supercomputer in industries, which will also be elaborated in this article. (author)

  11. Development of groundwater treatment methods using radiation-induced graft polymerization adsorbent at the Mizunami Underground Research Laboratory. Annual report for 2008 fiscal year (Joint research)

    International Nuclear Information System (INIS)

    Iyatomi, Yosuke; Shimada, Akiomi; Ogata, Nobuhisa; Sugihara, Kozo; Hoshina, Hiroyuki; Seko, Noriaki; Kasai, Noboru; Ueki, Yuji; Tamada, Masao

    2011-02-01

    The concentrations of fluorine (7.2-10mg/L) and boron (0.8-1.5mg/L) dissolved in groundwater pumped from the shafts during excavation of the Mizunami Underground Research Laboratory (MIU), Tono Geoscience Center, shall be reduced to levels below the environmental standards for fluorine: 0.8mg/L and boron: 1mg/L. Coagulation and ion exchange methods are being applied for fluorine and boron, respectively, at the operating water treatment facility at the MIU. As well, collaborative research on groundwater treatment started in 2006 between the Environmental and Industrial Materials Research Division, Quantum Beam Science Directorate and the Tono Geoscientific Research Unit, Geological Isolation Research and Development Directorate on a novel method to remove the fluorine and boron. The Quantum Beam Directorate has synthesized fibrous adsorbents with radiation-induced graft polymerization and applied the adsorbents to collect rare metals dissolved in hot springs and sea water. The results of previous testing indicated that the adsorbent was able to remove more than 95% of the boron and fluorine and that performance of adsorbent for boron removal was better than the performance using ion-exchange resin. It was also apparent that the pH of groundwater had an influence on the performance of the adsorbent with respect to boron removal. Therefore we reran the recycling tests using groundwater from the neutralization tank at the groundwater treatment facility were repeated. The results indicated that the performance of the adsorbent using neutral groundwater for boron removal was higher than using uncontrolled groundwater. However the bed volume (BV) with recycled adsorbent decreased compared to first use. It is thought that sulfur added at the groundwater treatment facility was retained by the adsorbent despite elution, and affected the performance such that repeat usage resulted in decreased efficiency. In addition, it is considered that the goals established in the first

  12. Industry and forest wetlands: Cooperative research initiatives

    International Nuclear Information System (INIS)

    Shepard, J.P.; Lucier, A.A.; Haines, L.W.

    1993-01-01

    In 1989 the forest products industry responded to a challenge of the National Wetlands Policy Forum to initiate a cooperative research program on forest wetlands management organized through the National Council of the Paper Industry for Air and Stream Improvement (NCASI). The objective is to determine how forest landowners can manage wetlands for timber production while protecting other wetland functions such as flood storage, water purification, and food chain/wildlife habitat support. Studies supported by the NCASI in 9 states are summarized. Technical support on wetland regulatory issues to member companies is part of the research program. Since guidelines for recognizing wetlands for regulatory proposed have changed frequently, the NCASI has recommend an explicit link between wetland delineation and a classification system that considers difference among wetland types in vegetation, soils, hydrology, appearance, landscape position, and other factors. 16 refs

  13. Physical parameters of groundwater as indicators of pollution in industrial areas of Taxila, Wah and Hasanabdal

    International Nuclear Information System (INIS)

    Khan, M.S.; Zaheer-ud-Dln-Qureshi

    2004-01-01

    The Wah area historically famous for having sweet aquifer system is greatly effected due to environmental activities, such as industrialization and poor sewage system in the recent past. Thirty water samples have been collected from dug wells penetrating to shallow two layers in a multi layered aquifer system. The shallow aquifer is located at a depth of 45-85 feet and composed of very fine grained sand to silt in two layers separated by silty clay. To assess the contamination problems, physical parameters of groundwater such as temperature, color, turbidity, odour and taste have been estimated fifty percent of the dug wells have been found as contaminated and not fit for human consumption according 10 WHO standards. High values of electrical conductance determined in fifty percent of wells show trends of chemical contamination and their probable sources near by these wells against the general recharge pattern prevailing in the area can be located. (author)

  14. Scenario research: The food industry in 2010

    OpenAIRE

    Stacey, Julia; Sonne, Anne-Mette; Jensen, Birger Boutrup

    2001-01-01

    What kind of foods will the consumers choose to buy in 2010? Will they be buying organic foods, functional foods or go for the cheapest products? Nobody can predict the future. However, by using scenario techniques qualified indications on future developments can be put together. Researchers at MAPP and the Department of Manufacturing Engineering and Management, The Technical University of Denmark have constructed three scenarios about the Danish food industry in 2010. The aim has been to ide...

  15. Chromium isotope inventory of Cr(VI)-polluted groundwaters at four industrial sites in Central Europe

    Science.gov (United States)

    Novak, Martin; Martinkova, Eva; Chrastny, Vladislav; Stepanova, Marketa; Curik, Jan; Szurmanova, Zdenka; Cron, Marcel; Tylcer, Jiri; Sebek, Ondrej

    2016-04-01

    Chromium is one of the most toxic elements, especially in its dissolved Cr(VI) form. In the Czech Republic (Central Europe), massive contamination of groundwater has been reported at more than 200 industrial operations. Under suitable conditions, i.e., low Eh, and high availability of reductive agents, Cr(VI) in groundwater may be spontaneously reduced to solid, largely non-toxic Cr(III). This process is associated with a Cr isotope fractionation, with the residual liquid Cr(VI) becoming enriched in the heavier isotope 53Cr. At industrial operations that have been closed and/or where no further leakage of Cr(VI) occurs, the contaminated groundwater plume may be viewed as a closed system. At such sites, an increasing degree of Cr(VI) reduction should result in an increasing del53/52Cr value of the residual liquid. Here we present del53/52Cr systematics at four contaminated Czech sites, focusing on groundwaters. At two of the four sites (Zlate Hory, Loucna) we were also able to analyze the source of contamination. Chromium in the electroplating solutes was isotopically relatively light, with del53/52Cr values 4.0 per mil (mean of +1.7 per mil); at Letnany, del53/52Cr ranged between +2.0 and +4.5 per mil (mean of +3.2 per mil); and at Velesin, del53/52Cr ranged between +0.5 and +4.5 per mil (mean of +2.7 per mil). Cr(VI) reduction may proceed at Zlate Hory and Loucna, where del53/52Cr(VI) values in groundwater were on average higher than those of the contamination source. At these two sites, our Cr isotope data are not consistent with the existing estimates of the amount of dissolved and precipitated Cr: The pool size of solid Cr(III) in the soil was estimated at 6600 and 500 kg at Zlate Hory and Loucna, respectively. At the same time, the pool size of dissolved Cr(VI) was estimated at 50 and 1.2 kg at Zlate Hory and Loucna, respectively. It follows that, at both sites, less than 1 % of the entire Cr that had leaked into the aquifer an a liquid form remained in the

  16. CONFERENCE CHEVREUL Nutrition research: the industrial approach

    Directory of Open Access Journals (Sweden)

    Korver Onno

    2000-01-01

    Full Text Available The goal of nutrition research in an industrial setting is the marketing of products. Since consumers cannot see from the product whether it is healthy, communication to the consumer about the nutritional and health values of the products is essential. Industrial nutrition research therefore has to provide the scientific dossier to underpin the claims and other communication on and around the product as well as the scientific basis for the communication. These two lines are illustrated in figure 1. For scientific audiences the steps to collect the scientific evidence are obvious: first screening for new ideas on the basis of scientific developments and business options, then identifying ingredients that can deliver the health benefit, followed by mechanistic and bioavailability studies and finally human intervention trials. The communication line is less obvious for most scientifically oriented audiences. Experience has shown that an information cascade has to be followed: during the execution of the research work close contact with academic experts (a true dialogue is essential, when the research data are available information of a wide selection of health professionals (e.g. physicians, dieticians, science journalists is taking place and only after this step communication to the consumer starts. The communication with the scientific experts (the first step of the cascade obviously has to be in the hands of the nutrition research group of the industry involved. In Unilever this is the Unilever Nutrition Centre based in Vlaardingen in the Netherlands. Their role in the scientific dialogue is outlined in figure 2. The fact that the “Medaille Chevreul” has been awarded twice to members of the Unilever Nutrition Centre in the last two decades, illustrates that the UNC is considered to be a group with a truly scientific tradition.

  17. Theoretical-methodical Fundamentals of industrial marketing research

    OpenAIRE

    Butenko, N.

    2009-01-01

    The article proves the necessity to research theoretical and methodical fundamentals of industrial marketing and defines main key aspects of relationship management with the customers on industrial market.

  18. Removal of pollutants from surface water and groundwater by nanofiltration: overview of possible applications in the drinking water industry

    International Nuclear Information System (INIS)

    Bruggen, Bart van der; Vandecasteele, Carlo

    2003-01-01

    The nanofiltration system has many potential uses in removing chemical and biological contaminants from water. - During the last decade, nanofiltration (NF) made a breakthrough in drinking water production for the removal of pollutants. The combination of new standards for drinking water quality and the steady improvement of the nanofiltration process have led to new insights, possible applications and new projects on lab-scale, pilot scale and industrial scale. This paper offers an overview of the applications in the drinking water industry that have already been realised or that are suggested on the basis of lab-scale research. Applications can be found in the treatment of surface water as well as groundwater. The possibility of using NF for the removal of hardness, natural organic material (NOM), micropollutants such as pesticides and VOCs, viruses and bacteria, salinity, nitrates, and arsenic will be discussed. Some of these applications have proven to be reliable and can be considered as known techniques; other applications are still studied on laboratory scale. Modelling is difficult due to effects of fouling and interaction between different components. The current insight in the separation mechanisms will be briefly discussed

  19. Groundwater flow modeling in construction phase of the Mizunami Underground Research Laboratory project

    International Nuclear Information System (INIS)

    Onoe, Hironori; Saegusa, Hiromitsu; Takeuchi, Ryuji

    2016-01-01

    This paper comprehensively describes the result of groundwater flow modeling using data of hydraulic responses due to construction of Mizunami Underground Research Laboratory (MIU) in Mizunami, Gifu, in order to update hydrogeological model based on stepwise approach for crystalline fractured rock in Japan. The results showed that large scale hydraulic compartment structures which has significant influence on change of groundwater flow characteristics are distributed around MIU. Furthermore, it is concluded that hydrogeological monitoring data and groundwater flow modeling during construction of deep underground facilities are effective for hydrogeological characterization of heterogeneous fractured rock. (author)

  20. Groundwater arsenic contamination in Bangladesh-21 Years of research.

    Science.gov (United States)

    Chakraborti, Dipankar; Rahman, Mohammad Mahmudur; Mukherjee, Amitava; Alauddin, Mohammad; Hassan, Manzurul; Dutta, Rathindra Nath; Pati, Shymapada; Mukherjee, Subhash Chandra; Roy, Shibtosh; Quamruzzman, Quazi; Rahman, Mahmuder; Morshed, Salim; Islam, Tanzima; Sorif, Shaharir; Selim, Md; Islam, Md Razaul; Hossain, Md Monower

    2015-01-01

    Department of Public Health Engineering (DPHE), Bangladesh first identified their groundwater arsenic contamination in 1993. But before the international arsenic conference in Dhaka in February 1998, the problem was not widely accepted. Even in the international arsenic conference in West-Bengal, India in February, 1995, representatives of international agencies in Bangladesh and Bangladesh government attended the conference but they denied the groundwater arsenic contamination in Bangladesh. School of Environmental Studies (SOES), Jadavpur University, Kolkata, India first identified arsenic patient in Bangladesh in 1992 and informed WHO, UNICEF of Bangladesh and Govt. of Bangladesh from April 1994 to August 1995. British Geological Survey (BGS) dug hand tube-wells in Bangladesh in 1980s and early 1990s but they did not test the water for arsenic. Again BGS came back to Bangladesh in 1992 to assess the quality of the water of the tube-wells they installed but they still did not test for arsenic when groundwater arsenic contamination and its health effects in West Bengal in Bengal delta was already published in WHO Bulletin in 1988. From December 1996, SOES in collaboration with Dhaka Community Hospital (DCH), Bangladesh started analyzing hand tube-wells for arsenic from all 64 districts in four geomorphologic regions of Bangladesh. So far over 54,000 tube-well water samples had been analyzed by flow injection hydride generation atomic absorption spectrometry (FI-HG-AAS). From SOES water analysis data at present we could assess status of arsenic groundwater contamination in four geo-morphological regions of Bangladesh and location of possible arsenic safe groundwater. SOES and DCH also made some preliminary work with their medical team to identify patients suffering from arsenic related diseases. SOES further analyzed few thousands biological samples (hair, nail, urine and skin scales) and foodstuffs for arsenic to know arsenic body burden and people sub

  1. Estimates of Arab world research productivity associated with groundwater: a bibliometric analysis

    Science.gov (United States)

    Zyoud, Shaher H.; Fuchs-Hanusch, Daniela

    2017-06-01

    The sustainable management of groundwater resources is a pressing necessity for most countries. As most of the Arab world is facing severe water scarcity, threats of depletion of non-renewable groundwater, and problems of pollution and salt-water intrusions into groundwater aquifers, much effort should be devoted to eliminate these dangers in advance. This work was devoted to bring up insights into Arab world research activities in groundwater, which is a crucial task to identify their status and can help in shaping up and improving future research activities. A bibliometric analysis has been conducted to track these activities. The study identified 1417 documents which represent 3.3% of global research productivity. Egypt was the most productive country (313; 22.1%), followed by Saudi Arabia (254; 17.9%). Total citations were 9720 with an average of 6.9. The h-index of the retrieved documents was 39, and the highest one was 22 for Egypt. The most common subject category was Environmental Science, and the most productive journal was Arabian Journal of Geosciences (99; 7.0%). In international research collaboration, France was the most collaborated country with Arab world (125; 8.8%), followed by the United States (113; 8.0%). The most productive institution was King Abdul-Aziz University, Saudi Arabia (66; 4.7%). The outcomes shows remarkable improvements in groundwater research activities originated from the Arab world. Even though, constructive efforts should be pursued vigorously to bridge the gaps in groundwater-based research. Moreover, promotion of better evaluation tools to assess the risks arising from the mismanagement of groundwater resources is required urgently.

  2. Evaluation of groundwater suitability for domestic, irrigational, and industrial purposes: a case study from Thirumanimuttar river basin, Tamilnadu, India.

    Science.gov (United States)

    Vasanthavigar, M; Srinivasamoorthy, K; Prasanna, M V

    2012-01-01

    The Thirumanimuttar sub-basin forms an important groundwater province in south India, facing serious deficiency in both quality and quantity of groundwater due to increased demand associated with rapid population explosion, agricultural growth and industrial activities. A total of 194 groundwater samples were collected and 15 water quality parameters were analyzed using standard procedures. Na( + ), Cl( - ), Ca(2 + ), HCO(-)(3), Mg(2 + ) and SO(2-)(4) concentration ions are more dominant in both seasons. The total dissolved solids and electrical conductivity was observed good correlation with Na( + ), Cl( - ), HCO(-)(3), Ca(2 + ), Mg(2 + ), Cl( - ), PO(3-)(4) and NO(-)(3) ions indicating dominance of plagioclase feldspar weathering, anthropogenic input and over drafting of groundwater irrespective of seasons. The Hill-Piper diagram indicates alkaline earths exceed the alkalis, an increase of weak acids was noted during both the seasons. For assessing the groundwater for irrigation suitability parameters like total hardness, sodium adsorption ratio, residual sodium carbonate (RSC), permeability index, and sodium percentage are also calculated. Permanent hardness was noted in higher during both the seasons due to discharge of untreated effluents and ion exchange process. The RSC indicates 56% of the samples are not suitable for irrigation purposes in both seasons, if continuously used will affect the crop yield. From the results, nearly 72% of the samples are not suitable for irrigation.

  3. Sports Nutrition Food Industry Chain Development Research

    OpenAIRE

    Jie Yin

    2015-01-01

    Through the study of Henan sports nutrition food industry chain optimization, the study analyses development advantage and competitive advantage of Henan in sports nutrition food industry chain and existing problems and challenges in Henan sports nutrition food industry chain and at the same time introduces the theory of supply chain management to the development of sports nutrition food industry chain, clearly optimizes countermeasures of sports nutrition food industry chain. Pointing out sp...

  4. Groundwater geochemical studies at the Altnabreac research site

    International Nuclear Information System (INIS)

    Kay, R.L.F.; Bath, A.H.

    1982-12-01

    Results of chemical and isotopic analyses of Altnabreac groundwaters are presented. They are used to define the origin and maturation scheme of groundwaters to depths approaching 300 m in crystalline rocks (granites and metasediments). Samples are derived from packer-isolated zones in 3 deep (approx. 300 m) boreholes, temporal monitoring of 17 shallow boreholes (less than 41 m deep) and about 60 springs and other surface waters as well as from 1981-82 aggregated monthly rainfall. Stable oxygen and hydrogen isotope ratios show all waters to be wholly meteoric in origin and the precipitation input to be well mixed. 3 H (tritium) contents suggest that recharge occurs on discrete upland areas where there tends to be downward movement with essentially horizontal flow, resulting in slight discharge, under the remaining ground. Samples abstracted from boreholes frequently contain significant levels of 3 H indicating a component of post-1953 recharge. This results from hydraulic connection to the borehole water column in deep boreholes or directly to the surface storage in the case of shallow boreholes. On the basis of 14 C and 4 He contents, details of which are being reported separately, the oldest analysed water (from 259 to 281 m in borehole A1B) has an age of about 10 4 years. The results are discussed. (author)

  5. Industrie 4.0 - from the perspective of applied research

    OpenAIRE

    Neugebauer, R.; Hippmann, S.; Leis, M.; Landherr, M.

    2016-01-01

    Industrie 4.0 is the German description for the 4th industrial revolution. While in Germany "Industrie 4.0" aims at putting the strong German manufacturing industry in a position of future readiness through integrated digitization, for the ICT-dominant USA, "Smart Manufacturing" is ought to revive the country's re-industrialization. Fraunhofer, a major European Research and Technology Organization (RTO), has a strong focus on Industrie 4.0 technologies throughout the whole production value ch...

  6. Regularities of uranium distribution in groundwater of ChNPP industrial site

    Directory of Open Access Journals (Sweden)

    M. I. Panasyuk

    2017-08-01

    Full Text Available Observed significant increase of migration properties of uranium from groundwater happens when pH rises above 9 - 10 against significant increases in the concentrations of major ions: Na+, K+, СО32-, NO2-, NO3-. Herewith, strongly alkaline reducing or transitional environment in groundwater is formed.

  7. Research of Innovation Diffusion on Industrial Networks

    Directory of Open Access Journals (Sweden)

    Yongtai Chen

    2014-01-01

    Full Text Available The real value of innovation consists in its diffusion on industrial network. The factors which affect the diffusion of innovation on industrial network are the topology of industrial network and rules of diffusion. Industrial network is a complex network which has scale-free and small-world characters; its structure has some affection on threshold, length of path, enterprise’s status, and information share of innovation diffusion. Based on the cost and attitude to risk of technical innovation, we present the “avalanche” diffusing model of technical innovation on industrial network.

  8. Energy efficient industrialized housing research program

    Energy Technology Data Exchange (ETDEWEB)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; Mc Donald, M.; McGinn, B.; Ryan, P.; Sekiguchi, T. (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Maxwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-01-01

    This is the second volume of a two volume report on energy efficient industrialized housing. Volume II contains support documentation for Volume I. The following items are included: individual trip reports; software bibliography; industry contacts in the US, Denmark, and Japan; Cost comparison of industrialized housing in the US and Denmark; draft of the final report on the systems analysis for Fleetwood Mobile Home Manufacturers. (SM)

  9. Characterising groundwater-dominated lowland catchments: the UK Lowland Catchment Research Programme (LOCAR

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available This paper reports on a major UK initiative to address deficiencies in understanding the hydro-ecological response of groundwater-dominated lowland catchments. The scope and objectives of this national programme are introduced and focus on one of three sets of research basins – the Pang/Lambourn Chalk catchments, tributaries of the river Thames in southern England. The motivation for the research is the need to support integrated management of river systems that have high ecological value and are subject to pressures that include groundwater abstraction for water supply, diffuse pollution, and land use and climate change. An overview of the research programme is provided together with highlights of some current research findings concerning the hydrological functioning of these catchments. Despite the importance of the Chalk as a major UK aquifer, knowledge of the subsurface movement of water and solutes is poor. Solute transport in the dual porosity unsaturated zone depends on fracture/matrix interactions that are difficult to observe; current experimental and modelling research supports the predominance of matrix flow and suggests that slow migration of a time-history of decades of nutrient loading is occurring. Groundwater flows are complex; catchments vary seasonally and are ill-defined and karst features are locally important. Groundwater flow pathways are being investigated using natural and artificial geochemical tracers based on experimental borehole arrays; stream-aquifer interaction research is using a combination of geophysics, borehole array geochemistry and longitudinal profiles of stream flow and solutes. A complex picture of localised subsurface inflows, linked to geological controls and karst features, and significant longitudinal groundwater flow below the river channel is emerging. Management implications are discussed. Strategies to control surface application of nutrients are expected to have little effect on groundwater

  10. Looking at groundwater research landscape of Jakarta Basin for better water management

    Science.gov (United States)

    Irawan, Dasapta Erwin; Priyambodho, Adhi; Novianti Rachmi, Cut; Maulana Wibowo, Dimas

    2017-07-01

    Based on our experience, defining the gap between what we know and what we don’t know is the hardest part in proposing water management strategy. Many techniques have been introduced to make this stage easier, and one of them is bibliometric analysis. The following paper is the second part of our bibliometric project in the search for a gap in the water resources research in Jakarta. This paper starts to analyse the visualisations that had been extracted from the previous paper based on our database. Using the keyword “groundwater Jakarta”, we managed to get 70 relevant papers. Several visualisations have been built using open source applications. Word cloud analysis shows that the trend to discuss groundwater in scientific sense had only been started in the early 2000’s. This is presumably due to the emerging regional autonomy in which forcing regions to understand their groundwater setting before creating a management strategy. More papers in the later time has been induced by more geo-hazards (land subsidence and floods) resulted in the vast groundwater pumping. More and more resources have been utilized to get more groundwater data. Water scientists by then understood that these hazards had been started long before the 2000’s. This had become the starting point of data era later on. The next era will be the era of water management. Hydrologists had been proposing integrated water management Jakarta and its nearby groundwater basins. Most of them have been strongly suggested to manage all water bodies, rainfall, surface water, and groundwater as one system. In the 2010’s we identify more papers are discussing in water quality following the vast discussion in water quantity in the previous era. People have been more aware the importance of quality in providing water system for the citizen. Then five years later, we believe that water researchers have also put their mind in the interactions between surface water and groundwater, especially in the

  11. Categories And Utilization Of Industrial Research And Development ...

    African Journals Online (AJOL)

    Research and Development outputs from scientific institutes and utilization of such outputs have been examin-ed. The data and information were drawn from 3 industry-based research Institutes of the Council for Scientific and Industrial Research (CSIR-Ghana), and also from users of the research outputs (such as ...

  12. Industrial research enhancement program at the National Synchrotron Light Source

    International Nuclear Information System (INIS)

    Wang Jun; Nasta, Kathleen; Kao, Chi-Chang

    2011-01-01

    Industrial research has attracted more and more attention recently at synchrotron facilities. Bringing the state-of-the-art research capabilities provided by these facilities to the industrial user community will help this community to improve their products and processing methods, to foster competition and build the economy. The National Synchrotron Light Source (NSLS) has a long and celebrated history in research partnerships with industry since its inception more than 25 years ago, and both industry and the facility have benefited tremendously from these partnerships. Over the years, the ways in which industrial research is conducted at synchrotron facilities have evolved significantly, and a new paradigm of collaboration between industry and facilities is clearly needed to address this changing situation. In this presentation, the discussion will focus on an enhancement plan recently implemented at the NSLS to address industrial users' concerns and needs. The goal of NSLS Industrial Program Enhancement plan is to encourage greater use of synchrotron tools by industry researchers, improve access to NSLS beamlines by industrial researchers and facilitate research collaborations between industrial researchers and NSLS staff as well as researchers from university and government laboratories. Examples of recent developments in these areas will be presented.

  13. Revised model of regional groundwater flow in the Whiteshell research area

    International Nuclear Information System (INIS)

    Ophori, D.U.; Brown, A.; Chan, T.; Davison, C.C.; Gascoyne, M.; Scheier, N.W.; Stanchell, F.W.; Stevenson, D.R.

    1996-08-01

    Steady-state regional groundwater flow of the Whiteshell Research Area (WRA) has been simulated in order to evaluate alternate locations for a hypothetical nuclear fuel waste disposal vault that maximize the retention of vault contaminants in long, slow groundwater flow paths through the geosphere. A revised conceptual model of the hydrogeologic conditions was constructed using all the information obtained from field investigations at the WRA between 1977 and 1994. All the simulations were performed using AECL's three-dimensional finite element code, MOTIF. A base-case simulation was performed using average value estimates of hydraulic parameters obtained from the field data, and freshwater was assumed to occur in the entire groundwater flow region. The simulated freshwater heads did not compare favourably with the freshwater beads that were derived from the field data. The simulated equivalent freshwater heads for the final calibrated model compared reasonably well with measured heads in the network of boreholes at the WRA. The simulated recharge rate for the final model was 4.8 mm/a Most of the groundwater flow in the model occurred in local systems between ground surface and a depth of 1000 m. A particle tracking code, TRACK3D, was used to determine the pathways, travel times and exit locations of particles released from different depths in the groundwater velocity field of the calibrated model. The exit locations of these pathways were found to be controlled by the network of regional fracture zones in the model. These results were used to select a location for a hypothetical nuclear fuel waste disposal vault in the regional groundwater flow model that maximizes the retention of vault contaminants in long, slow groundwater flow paths. A smaller region of about 75 km 2 was identified around this location for the development of a local geosphere model. (author). 32 refs., 4 tabs., 29 figs

  14. Research on Risks and Forecasting Countermeasures of Hainan Banana Industry

    OpenAIRE

    Liu, Yan-qun; Zeng, Xiao-hong; Fang, Jia

    2011-01-01

    Based on the overviews of the current conditions of Hainan banana industry, the research makes an analysis of the risks faced by Hainan banana industry. They are respectively marketing risks, natural risks, information risks and production risks. In order to promote a sustainable and rapid development of Hainan banana industry, Countermeasures are proposed in the research. The first is to strengthen the leading organization of forecasting mechanisms on banana industry. The second is to establ...

  15. Proceedings (of the) first annual groundwater and soil remediation R, D and D (research, development and demonstration) symposium

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    A symposium was held to present results of research on the remediation of contamination of groundwater and soils. Papers were presented on groundwater/soil remediation research and demonstration programs, in-situ bioremediation, remediation of groundwater contaminated by gasoline-derived aromatics, solvent extraction of petroleum hydrocarbons from soil, bioreactors for cleaning hydrocarbon- and salt-contaminated soils, in-situ volatilization technologies, evaluations of spill cleanup technologies, remediating subsurface contamination around sour gas processing plants, and the influence of gasoline oxygenates on the persistence of aromatics in groundwater. Separate abstracts have been prepared for 9 papers from this symposium.

  16. 75 FR 45130 - Guidance for Industry and Researchers on the Radioactive Drug Research Committee: Human Research...

    Science.gov (United States)

    2010-08-02

    ... and Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 51, rm. 2201, Silver... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2009-D-0125] Guidance for Industry and Researchers on the Radioactive Drug Research Committee: Human Research Without an...

  17. Development of groundwater treatment method using radiation-induced graft polymerization adsorbent at the Mizunami Underground Research Laboratory. Annual report on 2007 fiscal year (Joint research)

    International Nuclear Information System (INIS)

    Iyatomi, Yosuke; Shimada, Akiomi; Ogata, Nobuhisa; Sugihara, Kozo; Seko, Noriaki; Kasai, Noboru; Hoshina, Hiroyuki; Ueki, Yuji; Tamada, Masao

    2009-11-01

    The concentrations of fluorine (7.2-10mg/L) and boron (0.8-1.5mg/L) dissolved in groundwater pumped from shafts during excavation at the Mizunami Underground Research Laboratory (MIU), Tono Geoscience Centre, must be reduced to the levels below the environmental standards (fluorine:0.8mg/L, boron:1mg/L). Coagulation treatment and ion exchange treatment are applied for fluorine and boron at a current water treatment facility in MIU, respectively. A collaborative research on groundwater treatment for fluorine and boron was started by the Environment and Industrial Materials Research Division, Quantum Beam Science Directorate and the Tono Geoscientific Research Unit, Geological Isolation Research and Development Directorate in 2006. This is because the Quantum Beam Science Directorate has synthesized fibrous adsorbents with radiation-induced graft polymerization and applied them to collect rare metals dissolved in hot springs and sea water. Boron adsorbent synthesized by grafting showed higher removal rate than that of the ion-exchange resin. Additionally, the durability and the repetitive use of the boron adsorbent were evaluated to estimate the capacity of the boron adsorption. Therefore we produced a test equipment to do scale-up test of the adsorbent. Effects of flow rate and the repetitive use on the adsorption capacity of boron were investigated. As a result, it concluded that the adsorption capacity of the boron adsorbent did not change even when the flow rate increased from SV 50h -1 to 100h -1 . In addition, enough durability was confirmed for the repetitive use of the adsorbent. The adsorption capacity of the adsorbent was affected by pH of the groundwater especially in high alkaline range above a pH of 10. (author)

  18. Research on fracture analysis, groundwater flow and sorption processes in fractured rocks

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dae-Ha; Kim, Won-Young; Lee, Seung-Gu [Korea Institute of Geology Mining and Materials, Taejon (KR)] (and others)

    1999-12-01

    Due to increasing demand for numerous industrial facilities including nuclear power plants and waste repositories, the feasibility of rocks masses as sites for the facilities has been a geological issue of concern. Rock masses, in general, comprises systems of fractures which can provide pathways for groundwater flow and may also affect the stability of engineered structures. For the study of groundwater flow and sorption processes in fractured rocks, five boreholes were drilled. A stepwise and careful integration of various data obtained from field works and laboratory experiments were carried out to analyze groundwater flow in fractured rocks as follows; (1) investigation of geological feature of the site, (2) identification and characterization of fracture systems using core and televiewer logs, (3) determination of hydrogeological properties of fractured aquifers using geophysical borehole logging, pumping and slug tests, and continuous monitoring of groundwater level and quality, (4) evaluation of groundwater flow patterns using fluid flow modeling. The results obtained from these processes allow a qualitative interpretation of fractured aquifers in the study area. Column experiments of some reactive radionuclides were also performed to examine sorption processes of the radionuclides including retardation coefficients. In addition, analyses of fracture systems covered (1) reconstruction of the Cenozoic tectonic movements and estimation of frequency indices for the Holocene tectonic movements, (2) determination of distributions and block movements of the Quaternary marine terraces, (3) investigation of lithologic and geotechnical nature of study area, and (4) examination of the Cenozoic volcanic activities and determination of age of the dike swarms. Using data obtained from above mentioned analyses along with data related to earthquakes and active faults, probabilistic approach was performed to determine various potential hazards which may result from the

  19. West African Journal of Industrial and Academic Research ...

    African Journals Online (AJOL)

    Computer networks, Satellite & communications Engineering ResearchIndustrial Computer applications ... Information Assurance & Network Security: The African Dilemma ... E-Waste Management Environmental Protection • Management ...

  20. Profiling oil sands mixtures from industrial developments and natural groundwaters for source identification.

    Science.gov (United States)

    Frank, Richard A; Roy, James W; Bickerton, Greg; Rowland, Steve J; Headley, John V; Scarlett, Alan G; West, Charles E; Peru, Kerry M; Parrott, Joanne L; Conly, F Malcolm; Hewitt, L Mark

    2014-01-01

    The objective of this study was to identify chemical components that could distinguish chemical mixtures in oil sands process-affected water (OSPW) that had potentially migrated to groundwater in the oil sands development area of northern Alberta, Canada. In the first part of the study, OSPW samples from two different tailings ponds and a broad range of natural groundwater samples were assessed with historically employed techniques as Level-1 analyses, including geochemistry, total concentrations of naphthenic acids (NAs) and synchronous fluorescence spectroscopy (SFS). While these analyses did not allow for reliable source differentiation, they did identify samples containing significant concentrations of oil sands acid-extractable organics (AEOs). In applying Level-2 profiling analyses using electrospray ionization high resolution mass spectrometry (ESI-HRMS) and comprehensive multidimensional gas chromatography time-of-flight mass spectrometry (GC × GC-TOF/MS) to samples containing appreciable AEO concentrations, differentiation of natural from OSPW sources was apparent through measurements of O2:O4 ion class ratios (ESI-HRMS) and diagnostic ions for two families of suspected monoaromatic acids (GC × GC-TOF/MS). The resemblance between the AEO profiles from OSPW and from 6 groundwater samples adjacent to two tailings ponds implies a common source, supporting the use of these complimentary analyses for source identification. These samples included two of upward flowing groundwater collected <1 m beneath the Athabasca River, suggesting OSPW-affected groundwater is reaching the river system.

  1. Research on fracture analysis, groundwater flow and sorption processes in fractured rocks

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dae Ha [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    Due to increasing demand for numerous industrial facilities including nuclear power plants and waste repositories, the feasibility of rocks masses as sites for the facilities has been a geological issue of concern. Rock masses, in general, comprises systems of fractures which can provide pathways for groundwater flow and may also affect the stability of engineered structures. such properties of fractures stimulate a synthetic study on (1) analyses of fracture systems, and (2) characterization of groundwater flow and sorption processes in fractured rocks to establish a preliminary model for assessing suitable sites for industrial facilities. The analyses of fracture systems cover (1) reconstruction of the Cenozoic tectonic movements and estimation of frequency indices for the Holocene tectonic movements, (2) determination of distributions and block movements of the Quaternary marine terraces, (3) investigation of lithologic and geotechnical nature of study area, and (4) examination of the Cenozoic volcanic activities and determination of age of the dike swarms. Using data obtained from above mentioned analyses along with data related to earthquakes and active faults, probabilistic approach is performed to determine various potential hazards which may result from the Quaternary or the Holocene tectonic movements. In addition, stepwise and careful integration of various data obtained from field works and laboratory experiments are carried out to analyze groundwater flow in fractures rocks as follows; (1) investigation of geological feature of the site, (2) identification and characterization of fracture systems using core and televiewer logs, (3) determination of conductive fractures using electrical conductivity, temperature, and flow logs, (4) identification of hydraulic connections between fractures using televiewer logs with tracer tests within specific zones. The results obtained from these processes allow a qualitative interpretation of groundwater flow patterns

  2. Strategies for transdisciplinary research on peri-urban groundwater management in the Ganges delta

    Science.gov (United States)

    Hermans, Leon; Thissen, Wil; Gomes, Sharlene; Banerjee, Poulomi; Narain, Vishal; Salehin, Mashfiqus; Hasan, Rezaul; Barua, Anamika; Alam Khan, Shah; Bhattacharya, Samir; Kempers, Remi; Banerjee, Parthasarathi; Hossain, Zakir; Majumdar, Binoy; Hossain, Riad

    2016-04-01

    Transdisciplinary science transcends disciplinary boundaries. The reasons to engage in transdisciplinary science are many and include the desire to nurture a more direct relationship between science and society, as well as the desire to explain phenomena that cannot be explained by any of the existing disciplinary bodies of knowledge in isolation. Both reasons also reinforce each other, as reality often features a level of complexity that demands and inspires the combination of scientific knowledge from various disciplines. The challenge in transdisciplinary science, however, is not so much to cross disciplinary boundaries, but to ensure an effective connection between disciplines. This contribution reports on the strategy used in a transdisciplinary research project to address groundwater management in peri-urban areas in the Ganges delta. Groundwater management in peri-urban areas in rapidly urbanizing deltas is affected by diverse forces such as rapid population growth, increased economic activity and changing livelihood patterns, and other forces which result in a growing pressure on available groundwater resources. Understanding the intervention possibilities for a more sustainable groundwater management in these peri-urban areas requires an understanding of the dynamic interplay between various sub-systems, such as the physical groundwater system, the water using activities in households and livelihoods, and the institutional system of formal and informal rules that are used by various parties to access groundwater resources and to distribute the associated societal and economic costs and benefits. The ambition in the reported project is to contribute both new scientific knowledge, as well as build capacity with peri-urban stakeholders to improve the sustainability and equitability of local groundwater management. This is done by combining science and development activities, led by different organizations. The scientific component further consists of three

  3. Industrial Technologies Program Research Plan for Energy-Intensive Process Industries

    Energy Technology Data Exchange (ETDEWEB)

    Chapas, Richard B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Colwell, Jeffery A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2007-10-01

    In this plan, the Industrial Technologies Program (ITP) identifies the objectives of its cross-cutting strategy for conducting research in collaboration with industry and U.S. Department of Energy national laboratories to develop technologies that improve the efficiencies of energy-intensive process industries.

  4. Research proposal: Industry convergence - Driving forces, factors and consequences

    OpenAIRE

    Weaver, Benjamin

    2007-01-01

    Industry convergence – the merger of hitherto separate industries – is a phenomenon that has had a profound effect on several industries and received considerable interest among practitioners and business press over the past decades. Despite this, industry con- vergence has only received limited attention from the academic management field, al- though an emergent discussion on convergence can be identified. Prior research is limited by a lack of coherent theoretical definitions of convergence...

  5. Creative research in the chemical industry

    Indian Academy of Sciences (India)

    These efforts have involved several collaborators including many from other institutions and offered multitudinous challenges calling for continuous creativity in industrial setups. I was fortunate to have had a conducive environment to be able to respond to these challenges. I attempt to offer the readers in the ensuing pages ...

  6. Directory of French photovoltaic research and industry 2011

    International Nuclear Information System (INIS)

    Poubeau, Romain; Simmonet, Raphael; Canals, Jonathan

    2011-05-01

    After an overview of what is at stake in terms of industrial employment in the photovoltaic sector, a presentation of competitiveness clusters, a description of the value chain (cell manufacturers, arrays manufacturers, power inverter manufacturers, electric equipment manufacturers, structure component manufacturers, fabrication steps, etc.) in the photovoltaic sector, this document proposes a directory (addresses, activity descriptions) of research and industrial actors of the photovoltaic sector in France: research centres, manufacturers, industrial projects

  7. Regional groundwater flow in the Atikokan Research Area : simulation of 18O and 3H distributions

    International Nuclear Information System (INIS)

    Ophori, D.U.; Chan, Tin.

    1994-09-01

    AECL is investigating a concept for disposing of nuclear fuel waste deep in plutonic rock of the Canadian Shield. As part of this investigation, we have performed a model simulation of regional groundwater flow in the Atikokan Research Area, a fractured plutonic rock environment of the Canadian Shield, and used the distribution of oxygen-18 ( 18 O) and tritium ( 3 H) in groundwater to test the model. At the first stage of model calibration, groundwater flow was simulated using a three-dimensional finite-element code, MOTIF, in conjunction with a conceptual framework model derived from field geological, geophysical and hydrogeological data. Hydraulic parameters (permeability and porosity) were systematically varied until simulated recharge rates to the water table compared favourably with estimated recharge rates based on stream flow analysis. At the second stage, vertical average linear groundwater velocities from the first stage of the calibration process were combined with conceptualized one-dimensional models of the system to generate depth concentration profiles of 18 O and 3 H. Recharge-, midline-and discharge area models of both the fracture zones and the rock mass were employed. The simulated profiles formed 'envelopes' around all field 18 O and 3 H data, indicating that the calibrated velocities used in the model are reasonable. The models demonstrate that the scatter of δ 18 O and 3 H field data from the Atikokan Research Area is consistent with the groundwater flow model predictions and can be explained by the complexity arising from different hydraulic regimes (recharge, midline, discharge) and hydrogeologic environments (fracture zones, rock mass) of the regional flow system. 50 refs., 14 figs., 3 tabs

  8. Challenges in industrial fermentation technology research

    DEFF Research Database (Denmark)

    Formenti, Luca Riccardo; Nørregaard, Anders; Bolic, Andrijana

    2014-01-01

    Industrial fermentation processes are increasingly popular, and are considered an important technological asset for reducing our dependence on chemicals and products produced from fossil fuels. However, despite their increasing popularity, fermentation processes have not yet reached the same...... engineering challenges: scaling up and scaling down fermentation processes, the influence of morphology on broth rheology and mass transfer, and establishing novel sensors to measure and control insightful process parameters. The greatest emphasis is on the challenges posed by filamentous fungi, because...

  9. Porewater and groundwater geochemistry at the Down Ampney fault research site

    International Nuclear Information System (INIS)

    Metcalfe, R.; Ross, C.A.M.; Cave, M.R.; Green, K.A.; Reeder, S.; Entwisle, D.C.

    1993-01-01

    This work is performed under contract with the Commission of the European Communities in the framework of its research programme on Management and Storage of Radioactive Wastes. The importance of faults in mudrocks as groundwater conduits, and as a control on solute transport, was assessed in a Jurassic mudrock, siltstone and limestone sequence at Down Ampney, Gloucestershire. Samples were taken from a borehole array crossing an east-west trending fault, of approximately 48 m northerly downthrow. Squeezing mudrock samples yielded 18.1 to 34.5% of total porewater, which was analyzed for major/trace elements and stable O/H isotope compositions. Fault-zone porewaters have greatly increased sulphate concentrations relative to those remote from the fault. Porewater cation concentrations are related to pH, which is correlated with sulphate concentrations, probably controlled by sulphide oxidation. Control of cation concentrations is largely by pH-dependent carbonate dissolution and cation exchange reactions. Porewater C1 and Br concentrations increase downwards, but at twice the rate away from the fault as near the fault, suggesting that although meteoric waters penetrate throughout the area, they are preferentially conducted by the fault. Comparisons are made between pore- and groundwater samples from each side of the fault, and from the fault zone. Pore- and groundwater compositions are not simply related, except in the case of sulphate which, in the fault zone, is more diluted in groundwaters. 14 refs. 20 figs., 17 tabs

  10. Industry-identified combustion research needs: Special study

    Energy Technology Data Exchange (ETDEWEB)

    Keller, J.G.; Soelberg, N.R.; Kessinger, G.F.

    1995-11-01

    This report discusses the development and demonstration of innovative combustion technologies that improve energy conservation and environmental practices in the US industrial sector. The report includes recommendations by industry on R&D needed to resolve current combustion-related problems. Both fundamental and applied R&D needs are presented. The report assesses combustion needs and suggests research ideas for seven major industries, which consume about 78% of all energy used by industry. Included are the glass, pulp and paper, refinery, steel, metal casting, chemicals, and aluminum industries. Information has been collected from manufacturers, industrial operators, trade organizations, and various funding organizations and has been supplemented with expertise at the Idaho National Engineering Laboratory to develop a list of suggested research and development needed for each of the seven industries.

  11. Developing and Managing University-Industry Research Collaborations through a Process Methodology/Industrial Sector Approach

    Science.gov (United States)

    Philbin, Simon P.

    2010-01-01

    A management framework has been successfully utilized at Imperial College London in the United Kingdom to improve the process for developing and managing university-industry research collaborations. The framework has been part of a systematic approach to increase the level of research contracts from industrial sources, to strengthen the…

  12. Research and Exploration for Operational Research Education in Industry and Engineering Subject

    Science.gov (United States)

    Wu, Yu-hua; Wang, Feng-ming; Du, Gang

    2007-01-01

    On the basic of exploring the relationship of industry engineering and operational research technique, the thesis analyzes the location and utility of the operational research education in the whole industry engineering subject education. It brings forward the system design about operational research and relative class among industry engineering…

  13. Groundwater monitoring program plan and conceptual site model for the Al-Tuwaitha Nuclear Research Center in Iraq.

    Energy Technology Data Exchange (ETDEWEB)

    Copland, John Robin; Cochran, John Russell

    2013-07-01

    The Radiation Protection Center of the Iraqi Ministry of Environment is developing a groundwater monitoring program (GMP) for the Al-Tuwaitha Nuclear Research Center located near Baghdad, Iraq. The Al-Tuwaitha Nuclear Research Center was established in about 1960 and is currently being cleaned-up and decommissioned by Iraqs Ministry of Science and Technology. This Groundwater Monitoring Program Plan (GMPP) and Conceptual Site Model (CSM) support the Radiation Protection Center by providing: A CSM describing the hydrogeologic regime and contaminant issues, recommendations for future groundwater characterization activities, and descriptions of the organizational elements of a groundwater monitoring program. The Conceptual Site Model identifies a number of potential sources of groundwater contamination at Al-Tuwaitha. The model also identifies two water-bearing zones (a shallow groundwater zone and a regional aquifer). The depth to the shallow groundwater zone varies from approximately 7 to 10 meters (m) across the facility. The shallow groundwater zone is composed of a layer of silty sand and fine sand that does not extend laterally across the entire facility. An approximately 4-m thick layer of clay underlies the shallow groundwater zone. The depth to the regional aquifer varies from approximately 14 to 17 m across the facility. The regional aquifer is composed of interfingering layers of silty sand, fine-grained sand, and medium-grained sand. Based on the limited analyses described in this report, there is no severe contamination of the groundwater at Al-Tuwaitha with radioactive constituents. However, significant data gaps exist and this plan recommends the installation of additional groundwater monitoring wells and conducting additional types of radiological and chemical analyses.

  14. Groundwater assessment in water resources management at Nuclear and Energy Research Institute, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Sabrina M.V.; Marques, Joyce R.; Monteiro, Lucilena R.; Stellato, Thamiris B.; Silva, Tatiane B.S.C.; Faustino, Mainara G.; Silva, Douglas B. da; Cotrim, Marycel E.B.; Pires, Maria Aparecida F., E-mail: sabrinamoura@usp.br, E-mail: joyce.marques@usp.br, E-mail: luciremo@uol.com.br, E-mail: thamistellato@gmail.com, E-mail: tatianebscs@live.com, E-mail: mainarag@usp.br, E-mail: douglas.sbatista@yahoo.com.br, E-mail: mecotrim@ipen.br, E-mail: mapires@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    To comply with the guidelines for environmental control and legal requirements, the Nuclear and Energy Research Institute (IPEN/ CNEN - Brazil/ SP) performs the Environmental Monitoring Program for Chemical Stable Compounds (PMA-Q) since 2007, in attendance to the Term for the Adjustment of Conduct (TAC) signed between IPEN and the Brazilian Institute of Environment and Renewable Natural Resources (IBAMA). The PMA-Q program includes the assessment of the IPEN's wastewater released in water body, and the groundwater assessment, which is carried out in nine monitoring wells. In groundwater is analyzed, by ion chromatography, species regulated by CONAMA 396/08 [01] fluoride, chloride, nitrite-N, nitrate-N, sulfate, sodium, potassium, ammonium, magnesium and calcium, besides other parameters. Furthermore, based on legal requirements, each year the program is reviewed and improvement actions are planned and implemented. Therefore, the integrated monitoring of groundwater should provide information on the quality and dynamics of the aquifer compared to seasonal variations and anthropogenic effects. Thus, this study intends to evaluate the chemical features of the institute groundwater, evaluating the database of the monitoring program from 2011 to 2014, for the ions chloride, nitrate-N, sulfate, sodium, potassium, magnesium, calcium and bicarbonate, using these information diagrams will be developed for the characterization of the wells. This assessment will be essential to support the control actions of environmental pollution and the management of water resources. Making possible the establishment of groundwater Quality Reference Figures (QRF), according to the CONAMA 396/08 [01] rating, in order to demonstrate that the activities developed at IPEN are not affecting on the aquifer features. (author)

  15. Industrial oriented research at Ljubljana Tandetron Facility

    International Nuclear Information System (INIS)

    Pelicon, P.; Simcic, J.; Razpet, A.; Budnar, M.

    2001-01-01

    Full text: Galvanization is the cheapest and the most frequently used industrial coating technique. The diagnostics of usually thick deposited layers is rather time consuming and expensive, when surface layers have to be removed to obtain depth concentration profiles. Proton- impact RBS exhibits both large range and sufficient depth resolution for efficient and cost-effective depth profiling. Several galvanic coatings, composed of Sn/Cu/Ni/Graphite layers were analyzed by current-normalized RBS. 3 MeV protons were used to enable detection range of up to 25 micrometers. SIMNRA code was used to analyze the spectra. The depth concentration profiles obtained enable the control of annealing to obtain proper concentration mixing at the interfaces. In this way, the melting point of the upper layer for contact welding and wear hardness could be optimized. (author)

  16. Industry-university collaboration for research and education

    International Nuclear Information System (INIS)

    Shalaby, B.A.; Snell, V.G.; Rouben, B.

    2015-01-01

    University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

  17. Industry-university collaboration for research and education

    Energy Technology Data Exchange (ETDEWEB)

    Shalaby, B.A.; Snell, V.G.; Rouben, B. [Univ. Network of Excellence in Nuclear Energy (UNENE), Ontario (Canada)

    2015-09-15

    University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

  18. Industry-university collaboration for research and education

    Energy Technology Data Exchange (ETDEWEB)

    Shalaby, B.A.; Snell, V.G.; Rouben, B., E-mail: basma.shalaby@rogers.com [University Network of Excellence in Nuclear Energy, Hamilton, ON (Canada)

    2015-07-01

    University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

  19. Between science and industry-applied yeast research.

    Science.gov (United States)

    Korhola, Matti

    2018-03-01

    I was fortunate to enter yeast research at the Alko Research Laboratories with a strong tradition in yeast biochemistry and physiology studies. At the same time in the 1980s there was a fundamental or paradigm change in molecular biology research with discoveries in DNA sequencing and other analytical and physical techniques for studying macromolecules and cells. Since that time biotechnological research has expanded the traditional fermentation industries to efficient production of industrial and other enzymes and specialty chemicals. Our efforts were directed towards improving the industrial production organisms: minerals enriched yeasts (Se, Cr, Zn) and high glutathione content yeast, baker´s, distiller´s, sour dough and wine yeasts, and the fungal Trichoderma reesei platform for enzyme production. I am grateful for the trust of my colleagues in several leadership positions at the Alko Research Laboratories, Yeast Industry Platform and at the international yeast community.

  20. Improving industrial designers work process by involving user research

    DEFF Research Database (Denmark)

    Dai, Zheng; Ómarsson, Ólafur

    2011-01-01

    With changing times, new technologies and more opinionated consumers, the modern industrial designer has found himself in need of fresher and more up to date approaches in his daily work. In a fast moving industry, the designer needs to keep a thinking process of dynamic and subjective attitude...... will give the grounding for believing that the industrial designer needs to adopt user research methods to a level where he can still continue to work under the very nature of industrial design that has made it a successful practice for the last century. The combing of the approaches and attitude will help....... User research is part of user centered design (UCD). UCD has a reputation for subjective and reflective practice. In this paper there are two example cases. One is conducted by a classical industrial design process, and another is costing half of energy and time in user research. These examples...

  1. Challenges in industrial fermentation technology research.

    Science.gov (United States)

    Formenti, Luca Riccardo; Nørregaard, Anders; Bolic, Andrijana; Hernandez, Daniela Quintanilla; Hagemann, Timo; Heins, Anna-Lena; Larsson, Hilde; Mears, Lisa; Mauricio-Iglesias, Miguel; Krühne, Ulrich; Gernaey, Krist V

    2014-06-01

    Industrial fermentation processes are increasingly popular, and are considered an important technological asset for reducing our dependence on chemicals and products produced from fossil fuels. However, despite their increasing popularity, fermentation processes have not yet reached the same maturity as traditional chemical processes, particularly when it comes to using engineering tools such as mathematical models and optimization techniques. This perspective starts with a brief overview of these engineering tools. However, the main focus is on a description of some of the most important engineering challenges: scaling up and scaling down fermentation processes, the influence of morphology on broth rheology and mass transfer, and establishing novel sensors to measure and control insightful process parameters. The greatest emphasis is on the challenges posed by filamentous fungi, because of their wide applications as cell factories and therefore their relevance in a White Biotechnology context. Computational fluid dynamics (CFD) is introduced as a promising tool that can be used to support the scaling up and scaling down of bioreactors, and for studying mixing and the potential occurrence of gradients in a tank. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Challenges and opportunities from a combined research study and community groundwater testing program for residents living near hydraulic fracturing sites in Appalachian Ohio

    Science.gov (United States)

    Townsend-Small, A.

    2017-12-01

    People living in rural areas of the United States often depend on groundwater as the only domestic and agricultural water resource. Hydraulic fracturing (or "fracking") has led to widespread fears of groundwater contamination, and many people lack resources for monitoring their water. To help in this effort, I led a three-year free groundwater monitoring program for residents of parts of the Utica Shale drilling region of Ohio from early 2012 to early 2015. Our team took samples and made laboratory measurements of species meant to act as indicators of the presence of natural gas or fracking fluid in groundwater. All data were made available to participants, and all participation was voluntary. The project team also made several presentations about our findings at community meetings. In this presentation, I will discuss challenges associated with obtaining funding and communicating results with the media, the oil and gas industry, Congress, and my university. However, opportunities have arisen from this work as well, beyond the obvious opportunity for public service, including recruitment of undergraduate and graduate students to the project team; generation of scientific data in an emerging area of research; and a better understanding of policy needs for rural residents in Appalachia.

  3. MATWIN: bridging the gap between academic research and industry.

    Science.gov (United States)

    Reiffers, Josy; Robert, Lucia

    2015-09-16

    MATWIN (Maturation and Accelerating Translation With INdustry) is part of the nationwide effort to support cancer innovation. This unique program is willing to support innovative research projects providing tools, resources, and staff dedicated to project leaders wishing to optimize the industrial attractiveness of their project. The overall objective is clear: fight cancer always more effectively.

  4. Visual Narrative Research Methods as Performance in Industrial Design Education

    Science.gov (United States)

    Campbell, Laurel H.; McDonagh, Deana

    2009-01-01

    This article discusses teaching empathic research methodology as performance. The authors describe their collaboration in an activity to help undergraduate industrial design students learn empathy for others when designing products for use by diverse or underrepresented people. The authors propose that an industrial design curriculum would benefit…

  5. A new context for the nuclear research and industry

    International Nuclear Information System (INIS)

    2000-01-01

    Pascal Colombani, general administrator of the CEA, develops in this presentation the situation of the nuclear industry to introduce the new orientations of the CEA group. The energy context, the deregulation impacts, the energy dependence and the greenhouse effect project are discussed before the presentation of the research programs and the necessary reorganizing of the nuclear industry. (A.L.B.)

  6. Preliminary Results from Powell Research Group on Integrating GRACE Satellite and Ground-based Estimates of Groundwater Storage Changes

    Science.gov (United States)

    Scanlon, B. R.; Zhang, Z.; Reitz, M.; Rodell, M.; Sanford, W. E.; Save, H.; Wiese, D. N.; Croteau, M. J.; McGuire, V. L.; Pool, D. R.; Faunt, C. C.; Zell, W.

    2017-12-01

    Groundwater storage depletion is a critical issue for many of the major aquifers in the U.S., particularly during intense droughts. GRACE (Gravity Recovery and Climate Experiment) satellite-based estimates of groundwater storage changes have attracted considerable media attention in the U.S. and globally and interest in GRACE products continues to increase. For this reason, a Powell Research Group was formed to: (1) Assess variations in groundwater storage using a variety of GRACE products and other storage components (snow, surface water, and soil moisture) for major aquifers in the U.S., (2) Quantify long-term trends in groundwater storage from ground-based monitoring and regional and national modeling, and (3) Use ground-based monitoring and modeling to interpret GRACE water storage changes within the context of extreme droughts and over-exploitation of groundwater. The group now has preliminary estimates from long-term trends and seasonal fluctuations in water storage using different GRACE solutions, including CSR, JPL and GSFC. Approaches to quantifying uncertainties in GRACE data are included. This work also shows how GRACE sees groundwater depletion in unconfined versus confined aquifers, and plans for future work will link GRACE data to regional groundwater models. The wealth of ground-based observations for the U.S. provides a unique opportunity to assess the reliability of GRACE-based estimates of groundwater storage changes.

  7. West African Journal of Industrial and Academic Research ...

    African Journals Online (AJOL)

    Prof. Osuagwwu

    West African Journal of Industrial and Academic Research December 2016 v0l. ... 1Civil Engineering Department, Collage of Science and Engineering .... P.K. Guha (2009) maintenance and Repairs of Buildings published by new central Book ...

  8. West African Journal of Industrial and Academic Research - Vol 4 ...

    African Journals Online (AJOL)

    West African Journal of Industrial and Academic Research - Vol 4, No 1 (2012) ... Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ... on Gas Turbine Engine Data · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  9. West African Journal of Industrial and Academic Research - Vol 17 ...

    African Journals Online (AJOL)

    West African Journal of Industrial and Academic Research - Vol 17, No 1 (2017) ... Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ... The effect of electricity and gas losses on Nigeria`s Gross Domestic Product · EMAIL ...

  10. Engineered passive bioreactive barriers: risk-managing the legacy of industrial soil and groundwater pollution.

    Science.gov (United States)

    Kalin, Robert M

    2004-06-01

    Permeable reactive barriers are a technology that is one decade old, with most full-scale applications based on abiotic mechanisms. Though there is extensive literature on engineered bioreactors, natural biodegradation potential, and in situ remediation, it is only recently that engineered passive bioreactive barrier technology is being considered at the commercial scale to manage contaminated soil and groundwater risks. Recent full-scale studies are providing the scientific confidence in our understanding of coupled microbial (and genetic), hydrogeologic, and geochemical processes in this approach and have highlighted the need to further integrate engineering and science tools.

  11. Research by industry at the National Synchrotron Light Source

    International Nuclear Information System (INIS)

    1995-05-01

    The world's foremost facility for research using x-rays and ultraviolet and infrared radiation, is operated by the National Synchrotron Light Source dept. This pamphlet described the participating research teams that built most of the beam lines, various techniques for studying materials, treatment of materials, and various industrial research (catalysis, pharmaceuticals, etc.)

  12. Interdisciplinary Collaboration between Natural and Social Sciences – Status and Trends Exemplified in Groundwater Research

    Science.gov (United States)

    Seidl, Roman

    2017-01-01

    Interdisciplinary collaboration, particularly between natural and social sciences, is perceived as crucial to solving the significant challenges facing humanity. However, despite the need for such collaboration being expressed more frequently and intensely, it remains unclear to what degree such collaboration actually takes place, what trends and developments there are and which actors are involved. Previous studies, often based on bibliometric analysis of large bodies of literature, partly observed an increase in interdisciplinary collaboration in general, but in particular, the collaboration among distant fields was less explored. Other more qualitative studies found that interdisciplinary collaboration, particularly between natural and social scientists was not well developed, and obstacles abounded. To shed some light on the actual status and developments of this collaboration, we performed an analysis based on a sample of articles on groundwater research. We first identified journals and articles therein that potentially combined natural and social science aspects of groundwater research. Next, we analysed the disciplinary composition of their authors’ teams, cited references, titles and keywords, making use of our detailed personal expertise in groundwater research and its interdisciplinary aspects. We combined several indicators developed from this analysis into a final classification of the degree of multidisciplinarity of each article. Covering the period between 1990 and 2014, we found that the overall percentage of multidisciplinary articles was in the low single-digit range, with only slight increases over the past decades. The interdisciplinarity of individuals plays a major role compared to interdisciplinarity involving two or more researchers. If collaboration with natural sciences takes place, social science is represented most often by economists. As a side result, we found that journals publishing multidisciplinary research had lower impact

  13. Current uses of ground penetrating radar in groundwater-dependent ecosystems research.

    Science.gov (United States)

    Paz, Catarina; Alcalá, Francisco J; Carvalho, Jorge M; Ribeiro, Luís

    2017-10-01

    Ground penetrating radar (GPR) is a high-resolution technique widely used in shallow groundwater prospecting. This makes GPR ideal to characterize the hydrogeological functioning of groundwater-dependent ecosystems (GDE). This paper reviews current uses of GPR in GDE research through the construction of a database comprising 91 worldwide GPR case studies selected from the literature and classified according to (1) geological environments favouring GDE; (2) hydrogeological research interests; and (3) field technical and (4) hydrogeological conditions of the survey. The database analysis showed that inland alluvial, colluvial, and glacial formations were the most widely covered geological environments. Water-table depth was the most repeated research interest. By contrast, weathered-marl and crystalline-rock environments as well as the delineation of salinity interfaces in coastal and inland areas were less studied. Despite that shallow groundwater propitiated GDE in almost all the GPR case studies compiled, only one case expressly addressed GDE research. Common ranges of prospecting depth, water-table depth, and volumetric water content deduced by GPR and other techniques were identified. Antenna frequency of 100MHz and the common offset acquisition technique predominated in the database. Most of GPR case studies were in 30-50° N temperate latitudes, mainly in Europe and North America. Eight original radargrams were selected from several GPR profiles performed in 2014 and 2015 to document database classes and identified gaps, as well as to define experimental ranges of operability in GDE environments. The results contribute to the design of proper GPR surveys in GDE research. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Nonlinear ecosystem services response to groundwater availability under climate extremes

    Science.gov (United States)

    Qiu, J.; Zipper, S. C.; Motew, M.; Booth, E.; Kucharik, C. J.; Steven, L. I.

    2017-12-01

    Depletion of groundwater has been accelerating at regional to global scales. Besides serving domestic, industrial and agricultural needs, in situ groundwater is also a key control on biological, physical and chemical processes across the critical zone, all of which underpin supply of ecosystem services essential for humanity. While there is a rich history of research on groundwater effects on subsurface and surface processes, understanding interactions, nonlinearity and feedbacks between groundwater and ecosystem services remain limited, and almost absent in the ecosystem service literature. Moreover, how climate extremes may alter groundwater effects on services is underexplored. In this research, we used a process-based ecosystem model (Agro-IBIS) to quantify groundwater effects on eight ecosystem services related to food, water and biogeochemical processes in an urbanizing agricultural watershed in the Midwest, USA. We asked: (1) Which ecosystem services are more susceptible to shallow groundwater influences? (2) Do effects of groundwater on ecosystem services vary under contrasting climate conditions (i.e., dry, wet and average)? (3) Where on the landscape are groundwater effects on ecosystem services most pronounced? (4) How do groundwater effects depend on water table depth? Overall, groundwater significantly impacted all services studied, with the largest effects on food production, water quality and quantity, and flood regulation services. Climate also mediated groundwater effects with the strongest effects occurring under dry climatic conditions. There was substantial spatial heterogeneity in groundwater effects across the landscape that is driven in part by spatial variations in water table depth. Most ecosystem services responded nonlinearly to groundwater availability, with most apparent groundwater effects occurring when the water table is shallower than a critical depth of 2.5-m. Our findings provide compelling evidence that groundwater plays a vital

  15. Multi-Disciplinary Research Experiences Integrated with Industry –Field Experiences

    Directory of Open Access Journals (Sweden)

    Suzanne Lunsford

    2015-10-01

    Full Text Available The purpose of this environmentally inquiry-based lab was to allow the students to engage into real-world concepts that integrate industry setting (Ohio Aggregate Industrial Mineral Association with the academia setting. Our students are engaged into a field trip where mining occurs to start the problem based learning of how the heavy metals leak in the mining process. These heavy metals such as lead and indium in the groundwater are a serious concern for the environment (Environmental Protection Agency from the mining process. The field experiences at the mining process assist in building our students interest in developing sensors to detect heavy metals of concern such as lead and indium simultaneously by a unique electrochemistry technique called Square Wave Anodic Stripping Voltammetry (SWASV. The field experience assists building the students interest in real –world application and what qualities do they want the electrochemical sensor to possess to be successful for real world usage. During the field trip the students are engaged into learning novel instrumentation such as an SEM (Scanning Electron Microscope to study the working electrode sensor developed to understand the sensor surface morphology properties better as well. The integration of industry setting with academia has been a positive experience for our students that has allowed their understanding of real-world science research needs to succeed in an industrial setting of research.

  16. Assessment of industry needs for oil shale research and development

    Energy Technology Data Exchange (ETDEWEB)

    Hackworth, J.H.

    1987-05-01

    Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry's view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

  17. The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report

    Science.gov (United States)

    Bowen, Brent D.; Fink, Mary M.; Nickerson, Jocelyn S.

    2002-01-01

    This report presents and overview of the Aeronautics Education, Research, and Industry Alliance (AERIAL). It covers the University of Nebraska's areas of research, and its outreach to students at Native American schools as part of AERIAL. The report contains three papers: "Airborne Remote Sensing (ARS) for Agricultural Research and Commercialization Application" (White Paper), "Validated Numerical Models for the Convective Extinction of Fuel Droplets (CEFD)", and "The Small Aircraft Transportation System (SATS): Research Collaborations with the NASA Langley Research Center".

  18. Isotopic assessment of long term groundwater exploitation. Proceedings of a final research coordination meeting

    International Nuclear Information System (INIS)

    2006-10-01

    The stress imposed on the available water resources due to man's impact (exploitation, release of pollutants and agricultural practices) has resulted in depletion of the available reserves as well as deterioration of water quality in many parts of the world. Over wide areas, abstractions are exceeding current natural recharge and it is apparent from scientific studies that these water resources are being mined, especially in arid and semi-arid areas. Sustainable development and management of those water resources needs long term monitoring records to understand the changes and dynamic responses due to the exploitation. These proceedings provide a synthesis of a series of hydrochemical, isotope and geohydrological data sets which will be used for quantitative assessment of the long term dynamic response of the groundwater system. The results show that both stable and radioactive isotopes are excellent tools for characterizing and understanding aquifer systems that are undergoing long term exploitation. Specific outcomes include establishment of methodologies for monitoring and predicting changes in water quality and quantity that will lead to improved water resources management. This publication is a summary of the results achieved during the coordinated research project (CRP) and the various studies performed by the participating institutions are presented as individual presentations. The overall achievements are presented as an executive summary, and the detailed findings are presented in each contribution. These results were presented in the final coordination meeting held in Vienna, 12-16 May 2003. The results obtained from this CRP will be used to improve the predictions of future behaviour of groundwater resources in response to exploitation. The scientific component of this CRP will be a valuable source of information for isotope hydrologists involved in isotope field applications and a useful guide for groundwater managers involved in groundwater resources

  19. [Food industry funding and epidemiologic research in public health nutrition].

    Science.gov (United States)

    Navarrete-Muñoz, Eva María; Tardón, Adonina; Romaguera, Dora; Martínez-González, Miguel Ángel; Vioque, Jesús

    The interests of the food industry to fund nutrition and health research are not limited to promoting scientific advances. Recently, several systematic reviews conducted about the effect of sugar-sweetened beverages and health outcomes have shown some biased conclusions in studies that acknowledge industry sponsorship. In this context, the Nutrition Working Group of the Spanish Epidemiology Society presented a scientific session entitled Food industry and epidemiologic research at its annual meeting. In a round table, four experts in nutrition research presented their points of view about whether the food industry should fund nutrition-related research and the related potential conflicts of interest of the food industry. All the experts agreed not only on defending independence in nutritional epidemiology regarding the design, interpretation and conclusion of their studies but also on the crucial need for guaranteed scientific rigor, scientific quality of the results and measures to protect studies against potential biases related to the conflicts of interest of funding by the food industry. Drs Pérez-Farinós and Romaguera believe that the most effective way to prevent conflicts of interest would be not to allow the food industry to fund nutrition research; Drs Marcos and Martínez-González suggested the need to establish mechanisms and strategies to prevent the potential influences of the food industry in selecting researchers or institutional sponsorship and in the analysis and results of the studies, to ensure maximum independence for researchers, as well as their professional ethics. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  20. Progress, opportunities, and key fields for groundwater quality research under the impacts of human activities in China with a special focus on western China.

    Science.gov (United States)

    Li, Peiyue; Tian, Rui; Xue, Chenyang; Wu, Jianhua

    2017-05-01

    Groundwater quality research is extremely important for supporting the safety of the water supply and human health in arid and semi-arid areas of China. This review article was constructed to report the latest research progress of groundwater quality in western China where groundwater quality is undergoing fast deterioration because of fast economic development and extensive anthropogenic activities. The opportunities brought by increasing public awareness of groundwater quality protection were also highlighted and discussed. To guide and promote further development of groundwater quality research in China, especially in western China, ten key groundwater quality research fields were proposed. The review shows that the intensification of human activities and the associated impacts on groundwater quality in China, especially in western China, has made groundwater quality research increasingly important, and has caught the attention of local, national, and international agencies and scholars. China has achieved some progress in groundwater quality research in terms of national and regional laws, regulations, and financial supports. The future of groundwater quality research in China, especially in western China, is promising reflected by the opportunities highlighted. The key research fields proposed in this article may also inform groundwater quality protection and management at the national and international level.

  1. Research on optical applications in nuclear industry

    International Nuclear Information System (INIS)

    Kim, Cheol Jung; Shin, Jang Soo; Lee, Sang Mock; Baik, Sung Hoon; Kwon, Seong Ouk; Hong, Suc Kyoung; Kim, Duk Hyeon

    1988-12-01

    The laser fluorometer developed in 1987 has been modified to compensate the inner filter and quenching effects. The signal processing electronic circuit was redesigned and a computer interface was introduced for data processing. It has been already used in routine chemical analysis in the chemical analysis division. Its application to uranium monitoring in conversion plant is being investigated. Also, we found that it can be used in trace analysis of samarium and europium with detection limit of 1 ppb and 0.1 ppb, respectively. The IRMPA/D process of CDF 3 and CHF 3 have been studied. The pressure effects of CDF 3 ,CHF 3 and added buffer gas were investigated. Mainly, the change in reaction rate was examined while varying the pressure of CDF 3 , CHF 3 and buffer gas. The IRMPD reaction ratio of CDF 3 and CHF 3 from below 0.1 torr up to a few torr was studied and the buffer gas pressure effect was investigated at constant pressure of CDF 3 or CHF 3 of 1 torr. Several kinds of buffer gas, Ar, N 2 , and SF 6 , were used to investigate the buffer gas pressure effect. We applied double exposure holographic interferometry, and analyzed qualitatively the distortion due to thermal heat and vibration. The research on holographic remote inspection will be achieved to apply this technique to the nuclear fuel cycle facilities. (Author)

  2. Revised model of regional groundwater flow of the Whiteshell Research Area: Summary

    International Nuclear Information System (INIS)

    Ophori, D.U.; Stevenson, D.R.; Gascoyne, M.; Brown, A.; Davison, C.C.; Chan, T.; Stanchell, F.W.

    1995-10-01

    Regional groundwater flow of the Whiteshell Research Area (WRA) is simulated in order to evaluate alternative locations for a hypothetical nuclear fuel waste disposal vault that maximizes retention of vault contaminants in the geosphere, and to define boundary conditions for a smaller local model around the vault. A revised conceptual model of the hydrogeologic conditions was constructed using all the information obtained from field investigations at the WRA between 1977 and 1994. All the simulations were performed using AECL's three-dimensional finite-element code, MOTIF. Average values of hydraulic parameters obtained from the field data were used for a base-case simulation, in which freshwater was assumed to occur in the entire flow region. The simulated average groundwater recharge rate for this base case did not compare favourably with the recharge rate that was estimated from the field data. Model calibration was ultimately achieved by modifying the hydraulic parameters and total dissolved solids (TDS) distribution of the fluid in a series of consecutive simulations. The simulated recharge rate for the final calibrated model was 4.8 mm/a which compares well with the rate of 5 mm/a, that was estimated from independent field experiments. The simulated freshwater heads also compared reasonably well with measured heads in the network of boreholes at the WRA. Most of the groundwater flow occurred in local systems between the ground surface and the depth of 2000 m. The travel times, pathways and exit locations of particles released from different depth horizons in the groundwater velocity field of the calibrated model were determined using a particle tracking code, TRACK3D. These results were used to select a location for a hypothetical nuclear fuel waste disposal vault that maximizes the retention of vault contaminants in a long, slow groundwater flow pathways. The selected location is about 5 km northeast of the location of Underground Research Laboratory (URL

  3. A Groundwater project for K-12 schools: Bringing research into the classroom

    Science.gov (United States)

    Rodak, C. M.; Walsh, M.; Gensic, J.

    2011-12-01

    Simple water quality test kits were used in a series of K-12 classrooms to demonstrate scientific processes and to motivate learning in K-12 students. While focused on student learning, this project also allowed collection of regional data on groundwater quality (primarily nitrate) in the study area. The project consisted of development and administration of a weeklong groundwater quality unit introduced to K-12 schools in northern Indiana and taught by a graduate student in an engineering discipline. The structure of the week started with an introduction to basic groundwater concepts modified for the specific grade level; for this project the students ranged from grades 4-12. In addition to groundwater basics, the purpose of the collection of the water quality data, as well as relevance to the research of the graduate student, were outlined. The students were then: (i) introduced to two simple water quality testing methods for nitrates, (ii) required to hypothesize as to which method will likely be "better" in application, and (iii) asked to practice using these two methods under laboratory conditions. Following practice, the students were asked to discuss their hypotheses relative to what was observed during the practice focusing on which testing method was more accurate and/or precise. The students were then encouraged to bring water samples from their home water system (many of which are on private wells) to analyze within groups. At the end of the week, the students shared their experience in this educational effort, as well as the resulting nitrate data from numerous groundwater wells (as collected by the students). Following these discussions the data were added to an online database housed on a wiki sponsored by the Notre Dame Extended Research Community (http://wellhead.michianastem.org/home). These data were plotted using the free service MapAList to visually demonstrate to the students the spatial distribution of the data and how their results have

  4. Preliminary simulation of degassing of natural gases dissolved in groundwater during shaft excavation in Horonobe underground research project

    International Nuclear Information System (INIS)

    Yamamoto, Hajime; Shimo, Michito; Kunimaru, Takanori; Kurikami, Hiroshi

    2007-01-01

    In Neogene-Quaternary sedimentary basins, natural gases such as methane are often dissolved in groundwater significantly. In this paper, two-phase flow simulations incorporating the degassing of methane, and carbon dioxide, were performed for the shaft excavation in Horonobe underground research project. The results drawn from the simulations are summarized as follows. 1) As depth increases, degassing and gas inflow occurs significantly. 2) Degassing increases the compressibility of pore fluids, resulting in slow changes in groundwater pressures. 3) Although the occurrence of gas phase decreases water mobility, the influence of the dissolved gas on the groundwater inflow rate to the shaft was small. (author)

  5. Tracer tests to determine the impact of industrial activities on groundwater

    International Nuclear Information System (INIS)

    Gaspar, R.D.

    1995-01-01

    The drinking water supply from drains of Iasi town is vulnerable to pollution because of the human activities developed in the supply area. To assess the vulnerability, the transfer functions of pollutants were determined using activable tracer and fluorescent dyes. Tracer techniques have been applied in very permeable sediments and in surface waters for the determination of the dynamic parameters of groundwater movements such as flow vectors and dispersion. To determine the residence time distribution of the pollutants, the mathematical models for surface water pollution and an axial dispersion model for the porous medium between the pollution source and catchment were used. Tracer techniques also allowed the determination of water losses under the drain. (author) 7 figs., 1 tab., 12 refs

  6. Impact of Trade Liberalization and Exchange Rate Policy on Industrial Water Pollution and Groundwater Depletion

    OpenAIRE

    David, Cristina C.; Inocencio, Arlene B.; Gundaya, Debbie M.

    2000-01-01

    Environmentalists and economists alike have assumed that greater economic openness will lead to increased industrial pollution in developing countries. This paper argues that trade liberalization does not necessarily result in more pollution intensive industrial development using the case of two economic centers in the Philippines. The study links changes in trade and exchange rate policy to the environment by identifying the environmental damage likely to be aggravated by the policy change t...

  7. Strategies for implementing zero discharge in an industrial smelter : 1. Managing fluroide in groundwater

    Science.gov (United States)

    Stagnitti, F.; Salzman, S.; Thwaites, L.; Allinson, G.; Le Blanc, M.; Hill, J.; Doerr, S.; de Rooij, G.

    2003-04-01

    The Portland Aluminium smelter produces approximately 75 ML of process wastewater each year. This is combined with storm water runoff from the site to give an annual production of 715 ML. In common with many other smelters, this wastewater stream is currently discharged to the ocean. However, although the quality of the water Portland Aluminium discharges currently meets all Australian Environmental Protection Agency license requirements, this mode of release is unlikely to be acceptable in the near future, and alternative disposal options for the water are required. The Portland smelter has developed strategies which will enable it to achieve zero-discharge within 5 years. These strategies include separating process water from storm water, recycling storm water, construction of evaporation ponds to receive process water, irrigation of process water and storm water on lands within the site and maintenance of important wetland functions. The poster presents a summary of the management strategies currently being trialed and in particular focuses on modeling the spatial and temporal variations of fluoride found in the shallow groundwater and the implications of achieving zero-discharge. The poster also discusses the possible impacts on the distribution of fluoride and other solutes in the vadose zone by the irrigation of treated process water on blue-gum plantations. Computer simulations indicate that irrigation of process water (either treated or untreated) on the land poses no significant long-term threat to regional or surficial groundwater. However the impacts of increased solute transport through the vadose zone on changes in soil structure and nutrition require further investigation.

  8. CREATIV: Research-based innovation for industry energy efficiency

    International Nuclear Information System (INIS)

    Tangen, Grethe; Hemmingsen, Anne Karin T.; Neksa, Petter

    2011-01-01

    Improved energy efficiency is imperative to minimise the greenhouse gas emissions and to ensure future energy security. It is also a key to continued profitability in energy consuming industry. The project CREATIV is a research initiative for industry energy efficiency focusing on utilisation of surplus heat and efficient heating and cooling. In CREATIV, international research groups work together with key vendors of energy efficiency equipment and an industry consortium including the areas metallurgy, pulp and paper, food and fishery, and commercial refrigeration supermarkets. The ambition of CREATIV is to bring forward technology and solutions enabling Norway to reduce both energy consumption and greenhouse gas emissions by 25% within 2020. The main research topics are electricity production from low temperature heat sources in supercritical CO 2 cycles, energy efficient end-user technology for heating and cooling based on natural working fluids and system optimisation, and efficient utilisation of low temperature heat by developing new sorption systems and compact compressor-expander units. A defined innovation strategy in the project will ensure exploitation of research results and promote implementation in industry processes. CREATIV will contribute to the recruitment of competent personnel to industry and academia by educating PhD and post doc candidates and several MSc students. The paper presents the CREATIV project, discusses its scientific achievements so far, and outlines how the project results can contribute to reducing industry energy consumption. - Highlights: → New technology for improved energy efficiency relevant across several industries. → Surplus heat exploitation and efficient heating and cooling are important means. → Focus on power production from low temperature heat and heat pumping technologies. → Education and competence building are given priority. → The project consortium includes 20 international industry companies and

  9. Research of Talent Development Policy of Online Game Industry

    Directory of Open Access Journals (Sweden)

    Yun-Che Yang

    2003-12-01

    Full Text Available Due to the progress of information technology and the development of Internet, the digital content industry has become one of the most promising industries in the 21st century. The rapid growth of the online gaming industry at the turn of the century does not only catch the eyes of the whole world, but also reshape the entire information-related industry. The purpose of this study is to explore issue of the talent development policy of the domestic online game industry. The method of in-depth interview is used in this study, and the research target is chosen to be qualified of speaking for the government, the education institutes, and the private sectors in the industry. The findings of this research suggest that Taiwan's government should take up a more vigorous responsibility. Following the government's leadership, both education institutes and industry private sectors must actively participate in the collaboration and feed back the up-dated information, such as the market trend and most wanted human resources, to the policy makers.[Article content in Chinese

  10. Research and photovoltaic industry at the United States

    International Nuclear Information System (INIS)

    Lerouge, Ch.; Herino, R.; Delville, R.; Allegre, R.

    2006-06-01

    For a big country as the United States, the solar energy can be a solution for the air quality improvement, the greenhouse gases fight and the reduction of the dependence to the imported petroleum and also for the economic growth by the increase of the employment in the solar industry sector. This document takes stock on the photovoltaic in the United States in the industrial and research domains. The american photovoltaic industry is the third behind the Japan and the Germany. (A.L.B.)

  11. Canberra semiconductor, an industrial partner for physics research

    International Nuclear Information System (INIS)

    Verplancke, J.; Burger, P.; Schoenmaekers, W.

    1990-01-01

    Canberra semiconductor produces germanium and silicon solid state detectors for nuclear radiation. Its business domain covers the production of standard detectors on an industrial basis, for industrial and applied physics applications, as well as the development of special detectors and electronics, tailored to the needs of a particular application, in science and research. There exists an important and beneficial interaction between these two activities. (orig.)

  12. Utility of radiotracer methodology in scientific research of industrial relevancy

    International Nuclear Information System (INIS)

    Kolar, Z.I.

    1990-01-01

    Utilization of radiotracer methodology in industrial research provides substantial scientific rather than directly demonstrable economic benefits. These benefits include better understanding of industrial processes and subsequently the development of new ones. Examples are given of the use of radiotracers in technological studies and the significance of the obtained results is put down. Creative application of radiotracer methodology may contribute to the economic development and technological advancement of all countries including the developing ones. (orig.) [de

  13. Monitored natural attenuation (MNA) and risk management applied to an active industrial site affected by fuel spill in groundwater

    International Nuclear Information System (INIS)

    De Pablo, J.; Marti, V.; Rovira, M.; Vinolas, C.; Navarro, O.

    2005-01-01

    Monitored Natural Attenuation (MNA) applied to sites were groundwater have been affected by a fuel spill from an Industrial Underground Storage Tank (UST) is economically viable and a reliable methodology to achieve remediation goals. MNA process consists in the control of naturally occurring physical, chemical , and biological processes and is based in the knowledge of the processes that take place and reduce the charge of compounds derived from fuel in the site of study. Because the risk for Human Health and Ecosystem define the concept of contaminant, during MNA special attention has to be taken on concentration diminution of that are or could become contaminants and in this way is possible to perform Risk-Based Land Management (RBLM) by measuring both, the primary lines of evidence (shrinking or stable plume of contaminants) and secondary lines of evidence (given by geochemical indicators in the plume). Once, evidences have been gathered, is possible to calculate the rate of attenuation of contaminants and evaluate if admissible risk is reached an in a reasonable time framework, in order to propose MNA as a unique remediation or combined with other procedures to apply to an affected site. The objective of the present study is to evaluate the application of MNA to an active industrial site in order to develop a RBLM able to assess that the risk for Human Health and ecosystem are acceptable. The added attractive of this methodology is the non-intrusiveness that allows not to stop the industrial activity. The site considered in our study is in an active company located about 15 Km to NW from Barcelona, Spain.The company has a buried UST containing heavy fuel oil for energetic use. During 2002 a general soil impact study revealed that subsoil and groundwater close to the UST were affected by hydrocarbon losses from the tank and in January 2003 the fuel of the tank was emptied by pumping. The free phase of fuel floating on groundwater remained on the aquifer. As a

  14. Geophysical investigation to reveal the groundwater condition at new Borg El-Arab industrial city, Egypt

    Directory of Open Access Journals (Sweden)

    Alhussein A. Basheer

    2014-12-01

    The present study embraces Vertical Electrical Soundings (VES’es and Time Domain Electromagnetic sounding (TEM to investigate the study area. The study aims to delineate the main subsurface conditions from the viewpoint of groundwater location, depth and water quality. Analysis and interpretation of the obtained results reveal that the subsurface consists of five geoelectrical layers with a gentle general slope toward the Mediterranean Sea. The third and the fourth layers in the succession are suggested to be the two water bearing formations of which the third layer is saturated with fresh water overlying saline water at the bottom of the fourth one. It is worth mentioning that the fresh water depth varies between 50 and 354 m under the ground surface. The thickness of the fresh water aquifer varies from 9.5 to 66 m; and the saline water depth varies between 116 and 384 m below the ground surface, the thickness of saline water aquifer differs from 34 to 90.5 m.

  15. Factors controlling the population size of microbes in groundwater from AECL's Underground Research Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Stroes-Gascoyne, S.; Hamon, C. [Atomic Energy of Canada Limited, Whiteshell Labs., Pinawa, Manitoba (Canada); Mills, K. [University of Saskatoon, Saskatoon, SK (Canada); Rana, S.; Vaidyanathan, S. [Deep River Science Academy, Whiteshell Campus Summer 1997, Pinawa, Manitoba (Canada)

    2001-01-01

    Microbial populations in groundwaters from AECL's Underground Research Laboratory (URL) range from 10{sup 3} to 10{sup 5} cells/mL. Based on the total dissolved organic carbon (DOC), nitrate and phosphate content of these waters, populations of about 10{sup 5} to 10{sup 7} cells/mL should be possible. Upon storage of groundwater samples, total cell counts generally increase and viable cell counts always increase. A study was undertaken to determine what controls the in situ microbial population size in groundwater and what causes this population to grow upon sampling. Fresh URL groundwater was filter-sterilized, inoculated with small quantities of the unaltered water and incubated in the absence and presence of added nutrients (nitrate, phosphate and glucose). Unfiltered groundwater and R2A growth medium inoculated with unaltered groundwater, were also incubated. Microbial changes over time were followed by total and viable (on R2A medium) cell counts. Results showed that in the absence of any nutrient addition, populations grew to between 5 x 10{sup 5} to 4 x 10{sup 6} cells/mL, regardless of the initial size of the population ({approx}10{sup 1} to 10{sup 4} cells/mL), suggesting that nutrients for growth were available in the unamended groundwater. It was hypothesized that the original groundwater population was in 'equilibrium' with the underground environment, which likely included a large population of sessile cells in biofilms on fracture surfaces. Sampling of the groundwater removed the large demand on nutrient supplies by the sessile population which subsequently allowed the planktonic population to grow to a new 'equilibrium' with the available nutrients in the sample bottles. Addition of single nutrients (C, N or P) did not increase cell numbers, suggesting that more than one nutrient is limiting growth. Glucose was used very efficiently aerobically in the presence of both added N and P, but somewhat less under anaerobic

  16. Dissolved helium, inert gases, radium and radon in groundwaters from the Altnabreac research site

    International Nuclear Information System (INIS)

    Andrews, J.N.; Kay, R.L.F.

    1985-01-01

    A groundwater geochemical study has been carried out at Altnabreac, Cenithness, Scotland, to investigate the feasibility of disposal of high-level radioactive wastes in crystalline rock. A groundwater flow model was constructed for sampling a section at depths up to 300 m. Measurements of inert gases dissolved in groundwaters are used, with parallel measurements of 14 C, tritium, oxygen and hydrogen isotopes to infer groundwater ages and residence times. (UK)

  17. Emerging trends in contract research industry in India.

    Science.gov (United States)

    Drabu, Sushma; Gupta, Alka; Bhadauria, Anupama

    2010-09-01

    A Contract Research Organization (CRO) is a service organization that provides support to the pharmaceutical industry and offers a wide range of "outsourced" pharmaceutical research services to aid in R&D process and is thus an essential tool for undertaking clinical trials in the present scenario when high stakes are involved in the drug discovery process. This industry also offers a safe option of investment as the industry is largely recession-proof, with a significant upscale growth. Presently India occupies a very small pie of the global market share in the Clinical Trials Industry but it is estimated to conduct nearly 5% of global clinical trials by 2012. The global CRO industry valued $18 bn in 2008 and the market is expected to grow at an annual rate of 14% between 2009 and 13. Top multinational pharmaceuticals companies are venturing into the Indian business, in collaboration with the Indian Drug Companies. According to a recent study by Mckinsey & Company, the Indian Clinical Research Industry can attract $1.5 bn of revenue from US and EU by 2010. Such an increase in outsourcing from the western countries has led the global pharma companies and Indian entrepreneurs to set up Contract Research Organizations (CROs) in India. To bring this into realization and fulfil the market demand, while simultaneously aiding in improving the country's economical standards and market position, joint and well-coordinated efforts on part of the government, industry, and working professionals are needed in terms of regulatory affairs, audits, transparency in work affairs, garnering patient confidence, and pharmacovigilance. Copyright 2010 Elsevier Inc. All rights reserved.

  18. Research on the contamination levels of norovirus in food facilities using groundwater in South Korea, 2015-2016.

    Science.gov (United States)

    Lee, Jeong Su; Joo, In Sun; Ju, Si Yeon; Jeong, Min Hee; Song, Yun-Hee; Kwak, Hyo Sun

    2018-09-02

    Norovirus (NoV) is a major pathogenic virus that is responsible for foodborne and waterborne gastroenteritis outbreaks. Groundwater is an important source of drinking water and is used in agriculture and food manufacturing processes. This study investigated norovirus contamination of groundwater treatment systems at 1360 sites in seven metropolitan areas and nine provinces in 2015-2016. Temperature, pH, residual chlorine, and turbidity content were assessed to analyze the water quality. In 2015, six sites were positive for the presence of NoV (0.88%) and in 2016, two sites were positive (0.29%); in total, NoV was detected in 8 of the 1360 sample sites (0.59%) investigated. Identified genotypes of NoV in groundwater included GI.5, 9 and GII.4, 6, 13, 17, and 21. GII.17 was the most prevalent genotype in treated groundwater used in the food industry. This dominance of GII.17 was corroborated by NoV infection outbreak cases and the results of a survey of coastal waters in South Korea in 2014-2015. Although a low detection rate was observed in this study, NoV is a pathogen that can spread extensively. Therefore, it is necessary to periodically monitor levels of norovirus which is responsible for food poisoning in groundwater. This is a first report to reveal epidemic genotype shift of norovirus in groundwater treatment system of food facilities in South Korea. Our results may contribute to the enhancement of public health and sanitary conditions by providing molecular epidemiological information on groundwater NoV. Copyright © 2018 Elsevier B.V. All rights reserved.

  19. Logistics research report : Framework in the healthcare industry

    NARCIS (Netherlands)

    Willems, A.; Hajdasinski, A.K.; Willems, J.

    2009-01-01

    The research report takes the perspective of Information Logistics and investigates relating concepts like Knowledge Management, Information Systems and Context Awareness in the context of the healthcare industry. The aim of Information Logistics is to deliver the right information product, in the

  20. Specific features of occupational medicine in nuclear research and industry

    International Nuclear Information System (INIS)

    Giraud, J.M.; Quesne, B.

    2003-01-01

    Measures to prevent the exposure of personnel to ionising radiation were taken as soon as the first nuclear laboratories were set up. This branch of occupational preventive medicine has since kept pace with advances in research and in the industrial applications of nuclear energy. (authors)

  1. Technology Roadmap Research Program for the Steel Industry

    Energy Technology Data Exchange (ETDEWEB)

    Joseph R. Vehec

    2010-12-30

    The steel industry's Technology Roadmap Program (TRP) is a collaborative R&D effort jointly sponsored by the steel industry and the United States Department of Energy. The TRP program was designed to develop new technologies to save energy , increase competitiveness, and improve the environment. TRP ran from July, 1997 to December, 2008, with a total program budget of $38 million dollars. During that period 47 R&D projects were performed by 28 unique research organizations; co-funding was provided by DOE and 60 industry partners. The projects benefited all areas of steelmaking and much know-how was developed and transferred to industry. The American Iron and Steel Institute is the owner of all intellectual property developed under TRP and licenses it at commercial rates to all steelmakers. TRP technologies are in widespread use in the steel industry as participants received royalty-free use of intellectual property in return for taking the risk of funding this research.

  2. Supplementing Resident Research Funding Through a Partnership With Local Industry.

    Science.gov (United States)

    Skube, Steven J; Arsoniadis, Elliot G; Jahansouz, Cyrus; Novitsky, Sherri; Chipman, Jeffrey G

    2018-01-17

    To develop a model for the supplementation of resident research funding through a resident-hosted clinical immersion with local industry. Designated research residents hosted multiple groups of engineers and business professionals from local industry in general surgery-focused clinical immersion weeks. The participants in these week-long programs are educated about general surgery and brought to the operating room to observe a variety of surgeries. This study was performed at the University of Minnesota, in Minneapolis, Minnesota, at a tertiary medical center. Ten designated research residents hosted general surgery immersion programs. Fifty-seven engineers and business professionals from 5 different local biomedical firms have participated in this program. General surgery research residents (in collaboration with the University of Minnesota's Institute for Engineering in Medicine) have hosted 9 clinical immersion programs since starting the collaborative in 2015. Immersion participant response to the experiences was very positive. Two full-time resident research positions can be funded annually through participation in this program. With decreasing funding available for surgical research, particularly resident research, innovative ways to fund resident research are needed. The general surgery clinical immersion program at the University of Minnesota has proven its value as a supplement for resident research funding and may be a sustainable model for the future. Copyright © 2018 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  3. Studies on groundwater flow and radionuclide migration at underground environments. Final report of collaboration research between JAERI and AECL

    International Nuclear Information System (INIS)

    Ogawa, Hiromichi; Nagao, Seiya; Yamaguchi, Tetsuji

    2001-01-01

    The Japan Atomic Energy Research Institute (JAERI) conducted a collaboration program Phase II with the Atomic Energy of Canada Limited (AECL) from 1994 to 1998. The program was started to contribute the establishment of safety assessment methodology for the geological disposal of high-level radioactive wastes on the basis of the results from the Phase I program (1987-1993). The Phase II program consisted of following experimental items: (1) radionuclide migration experiments for quarried blocks (1m x 1m x 1m) of granite with natural fracture under in-situ geochemical conditions at 240 m level of Underground Research Laboratory of AECL; (2) study on the effects of dissolved organic materials extracted from natural groundwaters on radionuclide migration; (3) study on groundwater flow using environmental isotopes at two different geologic environments; (4) development of groundwater flow and radionuclide transport model for heterogeneous geological media. The mobility of radionuclides was retarded in the fracture by the deep geological conditions and the fracture paths. The groundwater humic substances with high molecular size were enhanced for the mobility of radionuclides in the sand and granitic media due to the complexation. The application of 36 Cl and 129 I for the analysis on the long-term groundwater flow can be validated on the basis of investigation at the URL site. Moreover, the geostatistical model for the analysis on groundwater flow and radionuclide migration was developed, and was able to describe the groundwater flow and the migration of environmental tracers at AECL sites. This report summaries the results of the Phase II program between JAERI and AECL. (author)

  4. Studies on groundwater flow and radionuclide migration at underground environments. Final report of collaboration research between JAERI and AECL

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, Hiromichi; Nagao, Seiya; Yamaguchi, Tetsuji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

    2001-01-01

    The Japan Atomic Energy Research Institute (JAERI) conducted a collaboration program Phase II with the Atomic Energy of Canada Limited (AECL) from 1994 to 1998. The program was started to contribute the establishment of safety assessment methodology for the geological disposal of high-level radioactive wastes on the basis of the results from the Phase I program (1987-1993). The Phase II program consisted of following experimental items: (1) radionuclide migration experiments for quarried blocks (1m x 1m x 1m) of granite with natural fracture under in-situ geochemical conditions at 240 m level of Underground Research Laboratory of AECL; (2) study on the effects of dissolved organic materials extracted from natural groundwaters on radionuclide migration; (3) study on groundwater flow using environmental isotopes at two different geologic environments; (4) development of groundwater flow and radionuclide transport model for heterogeneous geological media. The mobility of radionuclides was retarded in the fracture by the deep geological conditions and the fracture paths. The groundwater humic substances with high molecular size were enhanced for the mobility of radionuclides in the sand and granitic media due to the complexation. The application of {sup 36}Cl and {sup 129}I for the analysis on the long-term groundwater flow can be validated on the basis of investigation at the URL site. Moreover, the geostatistical model for the analysis on groundwater flow and radionuclide migration was developed, and was able to describe the groundwater flow and the migration of environmental tracers at AECL sites. This report summaries the results of the Phase II program between JAERI and AECL. (author)

  5. Non clinical research at CENTIS supporting biotechnological and pharmaceutical industry

    International Nuclear Information System (INIS)

    Hernandez Gonzalez, Ignacio

    2012-01-01

    Drugs production is a highly demanding industry because the rigor of legislations and guidelines. Standards are applied to manufacturing facilities and also to research and development stage. Our national biotechnological industry is developing and producing important medications for diseases like cancer, some of them in the national and international market. Isotopes Centre is an institution supporting such development by means of a work platform to carry out researches in the field of pharmacokinetic and biodistribution in experimental models. Accumulated experience allows us to contribute to research and development of different kind of molecules as pharmaceuticals, specially the biotechnological ones. We are evolving in direction to new technologies and methodologies more suitable to current standards. Radiolabeling is still a convenient choice considering present and new imaging technologies to investigate distribution and kinetic in living subjects. With the techniques we have and the ones to incorporate in a near future, new and more demanding investigations will be affordable. (author)

  6. Development of a groundwater monitoring system at Horonobe Underground Research Center

    International Nuclear Information System (INIS)

    Nanjo, Isao; Amano, Yuki; Iwatsuki, Teruki; Murakami, Hiroaki; Kunimaru, Takanori; Morikawa, Keita; Hosoya, Shinichi

    2012-03-01

    Japan Atomic Energy Agency (JAEA) develops basic investigation techniques for deep geological environment around Underground Research Laboratory (URL) at Horonobe area, Japan. The observation technique of hydrochemical condition in low permeable sedimentary rock around the facility is one of R and D subjects. We report, 1) development of hydrochemical monitoring system to observe water pressure, pH, electric conductivity, dissolved oxygen, redox potential and temperature, 2) hydrochemical observation results around URL under construction. The applicability of the hydrochemical monitoring system is evaluated for low permeable sedimentary rock bearing abundant dissolved gases. The hydrochemical observation during facility construction demonstrates that pH and redox potential of groundwater almost did not changed even at hydraulic disturbed zone (water pressure decreased zone). A CD-ROM is attached as an appendix. (J.P.N.)

  7. Recent Research Status on the Microbes in the Radioactive Waste Disposal and Identification of Aerobic Microbes in a Groundwater Sampled from the KAERI Underground Research Tunnel(KURT)

    International Nuclear Information System (INIS)

    Baik, Min Hoon; Lee, Seung Yeop; Cho, Won Jin

    2006-11-01

    In this report, a comprehensive review on the research results and status for the various effects of microbes in the radioactive waste disposal including definition and classification of microbes, and researches related with the waste containers, engineered barriers, natural barriers, natural analogue studies, and radionuclide migration and retardation. Cultivation, isolation, and classification of aerobic microbes found in a groundwater sampled from the KAERI Underground Research Tunnel (KURT) located in the KAERI site have carried out and over 20 microbes were found to be present in the groundwater. Microbial identification by a 16S rDNA genetic analysis of the selected major 10 aerobic microbes was performed and the identified microbes were characterized

  8. Research and Application of Autodesk Fusion360 in Industrial Design

    Science.gov (United States)

    Song, P. P.; Qi, Y. M.; Cai, D. C.

    2018-05-01

    In 2016, Fusion 360, a productintroduced byAutodesk and integrating industrial design, structural design, mechanical simulation, and CAM, turns out a design platform supportingcollaboration and sharing both cross-platform and via the cloud. In previous products, design and manufacturing use to be isolated. In the course of design, research and development, the communication between designers and engineers used to go on through different software products, tool commands, and even industry terms. Moreover, difficulty also lies with the communication between design thoughts and machining strategies. Naturally, a difficult product design and R & D process would trigger a noticeable gap between the design model and the actual product. A complete product development process tends to cover several major areas, such as industrial design, mechanical design, rendering and animation, computer aided emulation (CAE), and computer aided manufacturing (CAM). Fusion 360, a perfect design solving the technical problems of cross-platform data exchange, realizes the effective control of cross-regional collaboration and presents an overview of collaboration and breaks the barriers between art and manufacturing, andblocks between design and processing. The “Eco-development of Fusion360 Industrial Chain” is both a significant means to and an inevitable trend forthe manufacturers and industrial designers to carry out innovation in China.

  9. Tobacco industry consumer research on socially acceptable cigarettes.

    Science.gov (United States)

    Ling, P M; Glantz, S A

    2005-10-01

    To describe tobacco industry consumer research to inform the development of more "socially acceptable" cigarette products since the 1970s. Analysis of previously secret tobacco industry documents. 28 projects to develop more socially acceptable cigarettes were identified from Philip Morris, RJ Reynolds, British American Tobacco, and Lorillard tobacco companies. Consumer research and concept testing consistently demonstrated that many smokers feel strong social pressure not to smoke, and this pressure increased with exposure to smoking restrictions. Tobacco companies attempted to develop more socially acceptable cigarettes with less visible sidestream smoke or less odour. When presented in theory, these product concepts were very attractive to important segments of the smoking population. However, almost every product developed was unacceptable in actual product tests or test markets. Smokers reported the complete elimination of secondhand smoke was necessary to satisfy non-smokers. Smokers have also been generally unwilling to sacrifice their own smoking satisfaction for the benefit of others. Many smokers prefer smoke-free environments to cigarettes that produce less secondhand smoke. Concerns about secondhand smoke and clean indoor air policies have a powerful effect on the social acceptability of smoking. Historically, the tobacco industry has been unable to counter these effects by developing more socially acceptable cigarettes. These data suggest that educating smokers about the health dangers of secondhand smoke and promoting clean indoor air policies has been difficult for the tobacco industry to counter with new products, and that every effort should be made to pursue these strategies.

  10. A review of present research, research needs, and research capabilities related to the uranium mining and milling industry in Canada

    International Nuclear Information System (INIS)

    Woods, R.J.

    1981-01-01

    This report surveys the views of those associated with uranium mining in northern Saskatchewan on the research needs of the industry. Research resources, both human and material, available in the province are outlined. The author makes recommendations that would lead to a viable uranium research program. Appendices list information on current uranium-related research in Saskatchewan and available research resources

  11. Research into industrial technology policy trends in Australia. Role of government in promoting industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper reported the investigation into strategies of industrial technology, results of the R and D support plans, management of support fund plans, etc. by the Australian government. The present government introduced policies on industrial innovation and industrial technology, research and higher education, etc. from the end of 1997 to the end of 1999. Especially, recently the R and D preferential taxation system was introduced. As to organizations pertaining to science, technology, engineering and innovation, PMSEIC (prime minister's science, engineering and innovation council) under the direct control of prime minister is a top self-supporting organization, in which minister from each ministry join. Further, the assembly committee, which is not the bureaucratic organization, was separately established. In February 2000, the innovation summit was held, in which a lot of organizations from the industrial circle, government and research institutes participated. The conclusion was as follows: Australia is now at the crossroads of the resource dependent economy. The solution adopted in the past cannot meet the age of new knowledge. The rapidly advancing globalization makes the society more competitive. Enterprises that avoid the innovative investment are to expose themselves to danger. Australia is requested to make continued efforts for more innovative creation. (NEDO)

  12. Research into industrial technology policy trends in Australia. Role of government in promoting industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper reported the investigation into strategies of industrial technology, results of the R and D support plans, management of support fund plans, etc. by the Australian government. The present government introduced policies on industrial innovation and industrial technology, research and higher education, etc. from the end of 1997 to the end of 1999. Especially, recently the R and D preferential taxation system was introduced. As to organizations pertaining to science, technology, engineering and innovation, PMSEIC (prime minister's science, engineering and innovation council) under the direct control of prime minister is a top self-supporting organization, in which minister from each ministry join. Further, the assembly committee, which is not the bureaucratic organization, was separately established. In February 2000, the innovation summit was held, in which a lot of organizations from the industrial circle, government and research institutes participated. The conclusion was as follows: Australia is now at the crossroads of the resource dependent economy. The solution adopted in the past cannot meet the age of new knowledge. The rapidly advancing globalization makes the society more competitive. Enterprises that avoid the innovative investment are to expose themselves to danger. Australia is requested to make continued efforts for more innovative creation. (NEDO)

  13. From research to industry - the establishment of a radiation processing industry in South Africa

    International Nuclear Information System (INIS)

    Du Plessis, T.A.; Stevens, R.C.B.

    1983-01-01

    In the late sixties the South African Atomic Energy Board in pursuing its objectives to promote the peaceful application of nuclear energy in general, established a research group with the specific purpose of investigating and developing radiation processing as a new technique. During the early years it was realised that the economic and technological facets of establishing a new industry were equally important and, in addition to fundamental research, strong emphasis was placed on the necessity of marketing this new technology. Although the initial emphasis was put on gamma sterilization, and today still forms the backbone of the radiation processing industry, the promising fields of polymer modification and food irradiation hold a lot of promise in the radiation processing industry. Following ten years of successfully introducing and providing a radiation service, the South African Atomic Energy Board in 1980 decided to transfer its service to the private sector. These developments in South Africa are a good sample of how a small country, through initial government involvement, can acquire a sophisticated new private industry. (author)

  14. WAMAS: an event to develop synergies between research and industry

    CERN Multimedia

    Rosaria Marraffino

    2013-01-01

    On 19-20 November, CERN hosted the first Workshop on Advanced Materials and Surfaces (WAMAS) in the framework of EIROforum, a network of Europe’s largest inter-governmental research organisations.     “The intent of the workshop was to promote the importance of materials and surfaces technology in the research programmes of European organisations,” explains Enrico Chesta, CERN’s Technology Transfer Section Leader and chairman of the EIROforum Working Group on Innovation Management. “Events like WAMAS help support the involvement of industry with scientific institutions because they facilitate the translation of the available expertise into commercial applications.” The event was organised with the support of EuCARD-2 and Enterprise Europe Network (EEN) through the Rhône-Alpes Chamber of Commerce and Industry. “More than 160 participants came together at the workshop; there was a good balance between ind...

  15. Data of groundwater from boreholes, river water and precipitation for the Horonobe Underground Research Laboratory project. 2011-2010

    Energy Technology Data Exchange (ETDEWEB)

    Amano, Yuki; Yamamoto, Yoichi; Nanjyo, Isao; Murakami, Hiroaki; Yokota, Hideharu; Yamazaki, Masanori; Iwatsuki, Teruki [Japan Atomic Energy Agency, Geological Isolation Research and Development Directorate, Horonobe, Hokkaido (Japan); Kunimaru, Takanori [Japan Atomic Energy Agency, Geological Isolation Research and Development Directorate, Mizunami, Gifu (Japan); Oyama, Takahiro [Central Research Inst. of Electric Power Industry, Tokyo (Japan)

    2012-02-15

    In the Horonobe Underground Research Laboratory (URL) Project, groundwater from boreholes, river water and precipitation have been analyzed for the environmental monitoring since the fiscal year 2001. This report shows the data set of water chemistry since the fiscal year 2001 to the fiscal year 2010. (author)

  16. Data of groundwater from boreholes, river water and precipitation for the Horonobe Underground Research Laboratory project. 2011-2010

    International Nuclear Information System (INIS)

    Amano, Yuki; Yamamoto, Yoichi; Nanjyo, Isao; Murakami, Hiroaki; Yokota, Hideharu; Yamazaki, Masanori; Iwatsuki, Teruki; Kunimaru, Takanori; Oyama, Takahiro

    2012-02-01

    In the Horonobe Underground Research Laboratory (URL) Project, groundwater from boreholes, river water and precipitation have been analyzed for the environmental monitoring since the fiscal year 2001. This report shows the data set of water chemistry since the fiscal year 2001 to the fiscal year 2010. (author)

  17. How Researchers Use Social Media to Promote their Research and Network with Industry

    Directory of Open Access Journals (Sweden)

    Päivi Jaring

    2017-08-01

    Full Text Available Social media is now an essential information and interaction channel. Companies advertise and sell their products and services through social media, but this channel has not been so commonly applied to the task of selling knowledge and research work. This article studies the use of social media by researchers to promote their research and network with product developers in industry, and it presents a model of the use of social media by researchers. The data for this research was obtained by interviewing individual researchers of a research organization and surveying product developers from industry. The findings show that social media is seen as a good source of new information and contacts, and it is suitable for promoting awareness of research services and results. The results show that the speed and intensity of social media present challenges for researchers, but by being active in posting content and participating in discussions, researchers can derive benefits and enhance their personal reputations.

  18. Simulation of Groundwater Movement for Nuclear Research Center at AlTuwaitha Area in Baghdad City, Iraq

    Directory of Open Access Journals (Sweden)

    Ayad Sleibi Mustafa

    2017-07-01

    Full Text Available The simulation of groundwater movement has been carried out by using MODFLOW model in order to show the impact of change of water surface elevation of the Tigris river on layers of the aquifer system for Nuclear Research Center at Al-Tuwaitha area, in addition to evaluate the ability of the proposed pumping well to collect groundwater and change the direction of flow at steady-state. The results of the study indicated that there is a good match between the values of groundwater levels that calculated in the model and measured in the field, where mean error is 0.09 m.The study also showed that the increasing of water surface elevation of the Tigris river led to increase in the hydraulic head of observed wells, while the use proposed pumping well reduced the hydraulic head and intercepted the movement of groundwater flow. The flow direction is toward the Tigris river, and the velocity of flow is clear in the third layer identified medium sand which is 0.0015 m/day. The using of the proposed pumping well has changed the direction of groundwater, especially in the area around the well.

  19. Federal laboratory nondestructive testing research and development applicable to industry

    Energy Technology Data Exchange (ETDEWEB)

    Smith, S.A.; Moore, N.L.

    1987-02-01

    This document presents the results of a survey of nondestructive testing (NDT) and related sensor technology research and development (R and D) at selected federal laboratories. Objective was to identify and characterize NDT activities that could be applied to improving energy efficiency and overall productivity in US manufacturing. Numerous federally supported R and D programs were identified in areas such as acoustic emissions, eddy current, radiography, computer tomography and ultrasonics. A Preliminary Findings Report was sent to industry representatives, which generated considerable interest.

  20. Research of factors of marketing pricing at domestic industrial enterprises

    OpenAIRE

    V.V. Bozhkova; I.M. Ryabchenko

    2013-01-01

    The aim of the article. The purpose of the article is research and systematization of factors of marketing pricing, which affect on realization of products of industrial enterprises.Works of domestic and foreign scientists on this issue were analysed. Traditionally pricing factors are classified into two groups: internal (controlled) and external (uncontrolled). Such division of factors is the first stage of pricing system analysis. On the second stage of analysis each of these groups is divi...

  1. Industry Research and Recommendations for New Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Hendron, B.; Leach, M.; Gregory, N.; Pless, S.; Selkowitz, S.; Matthew, P.

    2014-05-01

    Researchers evaluated industry needs and developed logic models to support possible future commercial new construction research and deployment efforts that could be led or supported by DOE's Commercial Building Integration program or other national initiatives. The authors believe that these recommendations support a proposed course of action from the current state of commercial building energy efficiency to a possible long-term goal of achieving significant market penetration of cost-effective NZE buildings in all building sectors and climates by 2030.

  2. ENVIRONMENTAL RESEARCH BRIEF : ANALYTIC ELEMENT MODELING OF GROUND-WATER FLOW AND HIGH PERFORMANCE COMPUTING

    Science.gov (United States)

    Several advances in the analytic element method have been made to enhance its performance and facilitate three-dimensional ground-water flow modeling in a regional aquifer setting. First, a new public domain modular code (ModAEM) has been developed for modeling ground-water flow ...

  3. Sugar Industry and Coronary Heart Disease Research: A Historical Analysis of Internal Industry Documents.

    Science.gov (United States)

    Kearns, Cristin E; Schmidt, Laura A; Glantz, Stanton A

    2016-11-01

    Early warning signals of the coronary heart disease (CHD) risk of sugar (sucrose) emerged in the 1950s. We examined Sugar Research Foundation (SRF) internal documents, historical reports, and statements relevant to early debates about the dietary causes of CHD and assembled findings chronologically into a narrative case study. The SRF sponsored its first CHD research project in 1965, a literature review published in the New England Journal of Medicine, which singled out fat and cholesterol as the dietary causes of CHD and downplayed evidence that sucrose consumption was also a risk factor. The SRF set the review's objective, contributed articles for inclusion, and received drafts. The SRF's funding and role was not disclosed. Together with other recent analyses of sugar industry documents, our findings suggest the industry sponsored a research program in the 1960s and 1970s that successfully cast doubt about the hazards of sucrose while promoting fat as the dietary culprit in CHD. Policymaking committees should consider giving less weight to food industry-funded studies and include mechanistic and animal studies as well as studies appraising the effect of added sugars on multiple CHD biomarkers and disease development.

  4. A research on industrial development of radiation sterilization in Sichuan

    International Nuclear Information System (INIS)

    Chen Xun; Zhu Rong; Chen Jigang

    2010-01-01

    Radiation sterilization is widely applied in food processing, Pharmaceutical Manufacturing and medical instrumentation producing. As this industry offers service to related corporations, its development depends largely on the market scale of the relevant industries. This article mainly discusses the balance point between the capacity of radiation sterilization and the requirement of its market. There are less than 1% of the companies in Sichuan which using radiation sterilization for its products, broad prospects has shown in this field. The output value of radiation sterilization industry reached 0.1% of the GDP in some advanced countries (America and Japan...), under this standard, its output value in Sichuan province would be RMB1.2 hundred million, but now our capacity and scale of this industry is less than RMB40million.Research shows: there are 3 key points to make its output value reach 0.1% of the GDP in Sichuan: 1. Breaking the 'bottleneck' restrictions of capacity and Inappropriate resources distribution. 2. Promoting the technique of radiation sterilization, guiding corporation to reduce their dependence on food additive from the perspective of food safety, make effective implantation of radiation sterilization into their manufacture processes. 3. Increasing publicity for radiation sterilization, eliminating scared mentality among customer on nuclear technology, helping manufacturing corporations to establish green environmental protection brand, directing our customer to a more healthy awareness. (authors)

  5. Assessing regional groundwater stress for nations using multiple data sources with the groundwater footprint

    International Nuclear Information System (INIS)

    Gleeson, Tom; Wada, Yoshihide

    2013-01-01

    Groundwater is a critical resource for agricultural production, ecosystems, drinking water and industry, yet groundwater depletion is accelerating, especially in a number of agriculturally important regions. Assessing the stress of groundwater resources is crucial for science-based policy and management, yet water stress assessments have often neglected groundwater and used single data sources, which may underestimate the uncertainty of the assessment. We consistently analyze and interpret groundwater stress across whole nations using multiple data sources for the first time. We focus on two nations with the highest national groundwater abstraction rates in the world, the United States and India, and use the recently developed groundwater footprint and multiple datasets of groundwater recharge and withdrawal derived from hydrologic models and data synthesis. A minority of aquifers, mostly with known groundwater depletion, show groundwater stress regardless of the input dataset. The majority of aquifers are not stressed with any input data while less than a third are stressed for some input data. In both countries groundwater stress affects agriculturally important regions. In the United States, groundwater stress impacts a lower proportion of the national area and population, and is focused in regions with lower population and water well density compared to India. Importantly, the results indicate that the uncertainty is generally greater between datasets than within datasets and that much of the uncertainty is due to recharge estimates. Assessment of groundwater stress consistently across a nation and assessment of uncertainty using multiple datasets are critical for the development of a science-based rationale for policy and management, especially with regard to where and to what extent to focus limited research and management resources. (letter)

  6. Molecular characterisation of dissolved organic matter (DOM) in groundwaters from the Aespoe Underground Research Laboratory (Sweden)): A novel 'finger printing' tool for palaeo-hydrological assessment

    International Nuclear Information System (INIS)

    Vane, C. H.; Kim, A. W.; Milodowski, A. E.; Smellie, J.; Tullborg, E. L.; West, J. M.

    2008-01-01

    The molecular signature of dissolved organic matter (DOM) in groundwaters can be used as a tool when investigating the palaeo-hydrological response of groundwater systems in relation to changes in recharge environment, and also for examining groundwater compartmentalisation, mixing and transport at underground repositories for radioactive waste. The DOM in groundwaters from two compartmentalised bodies of groundwater of distinctly different origin within the Aespoe Underground Research Laboratory (URL) (Sweden)) and in Baltic seawater has been isolated using tangential flow ultrafiltration (TUF) and dia-filtration. Recoveries of DOM ranged from 34.7 to 0.1 mg/L with substantial differences in the concentrations of the groundwaters collected only 120 m apart. Analysis by infrared spectroscopy (IR) and pyrolysis gas chromatography-mass spectrometry (Py-GC-MS) of the isolated DOM revealed that the groundwaters contained abundant alkylphenols which may represent heavily decomposed proteins or lignins originating from biopolymers contained within soils. The difference in the distribution and relative abundance of major pyrolysis products groups such as alkylphenols confirmed that the groundwater and Baltic seawater DOM samples were chemically distinct indicating minimal infiltration of marine groundwater derived by recharge from the Baltic or earlier Littorina Sea within the two compartmentalised groundwater bodies. (authors)

  7. Applications of synchrotron X-rays in microelectronics industry research

    International Nuclear Information System (INIS)

    Jordan-Sweet, Jean L.; Detavernier, Christophe; Lavoie, Christian; Mooney, Patricia M.; Toney, Michael F.

    2005-01-01

    The high flux and density of X-rays produced at synchrotrons provide the microelectronics industry with a powerful probe of the structure and behavior of a wide array of solid materials that are being developed for use in devices of the future. They also are of great use in determining why currently-used materials and processes sometimes fail. This paper describes the X20 X-ray beamline facility operated by IBM at the National Synchrotron Light Source, and presents a series of three industry challenges and results that illustrate the variety of techniques used and problems addressed. The value of this research ranges from solving short-term, technically specific problems to increasing our academic understanding of materials in general. Techniques discussed include high-resolution diffraction, time-resolved diffraction, texture measurements, and grazing-incidence diffraction

  8. Student involvement and research for the nuclear industry

    International Nuclear Information System (INIS)

    Ginniff, M.E.

    1980-01-01

    Nuclear engineering is one of the modern and rapidly advancing technologies. Those already involved in it are continually updating their knowledge to keep abreast of the developments. Of course the sound basic principles of engineering still apply but the scene of application can be transformed in a few years. In fact, because of this, many engineers from more traditional industries often express the view that presently the total range of nuclear engineering is research and development. How can students be trained for such a rapidly advancing technology. Is not the answer early involvement. Effective early involvement for students can only come about by the close co-operation and involvement of the staff of universities and industry. The theme is developed. (author)

  9. Groundwater chemistry and fracture mineralogy in the Whiteshell Research Area: Supporting data for the geosphere and biosphere transport models

    Energy Technology Data Exchange (ETDEWEB)

    Gascoyne, M.; Kamineni, D. C.

    1992-02-15

    For the case study in the Environmental Impact Statement for the Canadian Nuclear Fuel Waste Management Program, segments of the geosphere transport model (GEONET) have been assigned groundwater chemical properties and mineralogical abundances based on data obtained from analysis of groundwaters and rock types in the Whiteshell Research Area. For the groundwaters, salinity and redox conditions range from 0.5 g/L and +200 mV for the shallowest to 25 g/L and -300 mV for the deepest rock layers in the model. The salinity and redox trends of the segments are consistent with observations of other Canadian Shield environments and with concentrations of redox-sensitive species in the groundwater and fracture mineralogy. Modal volume percent of minerals estimated from thin sections of core samples have been used as input data for the same segments of GEONET. The most common minerals include chlorite, muscovite, clays (mainly illite), calcite and iron oxides. In addition, iodide concentrations for these segments have also been determined from available data to provide supporting data for the biosphere transport model (BIOTRAC). The concentrations range from 5 ug/L for shallow to 350 ug/L for deep groundwaters. Likely iodode concentrations for well water or near-surface water discharging into a lake in BIOTRAC range from 5 to 70 ug/L depending on well depth. A uniform probability distribution function is regarded as most appropriate for the groundwater data inputs and a normal distribution is most suitable for the mineralogical modal percent composition. (auth)

  10. HESS Opinions "Integration of groundwater and surface water research: an interdisciplinary problem?"

    Science.gov (United States)

    Barthel, R.

    2014-07-01

    Today there is a great consensus that water resource research needs to become more holistic, integrating perspectives of a large variety of disciplines. Groundwater and surface water (hereafter: GW and SW) are typically identified as different compartments of the hydrological cycle and were traditionally often studied and managed separately. However, despite this separation, these respective fields of study are usually not considered to be different disciplines. They are often seen as different specializations of hydrology with a different focus yet similar theory, concepts, and methodology. The present article discusses how this notion may form a substantial obstacle in the further integration of GW and SW research and management. The article focuses on the regional scale (areas of approximately 103 to 106 km2), which is identified as the scale where integration is most greatly needed, but ironically where the least amount of fully integrated research seems to be undertaken. The state of research on integrating GW and SW research is briefly reviewed and the most essential differences between GW hydrology (or hydrogeology, geohydrology) and SW hydrology are presented. Groundwater recharge and baseflow are used as examples to illustrate different perspectives on similar phenomena that can cause severe misunderstandings and errors in the conceptualization of integration schemes. The fact that integration of GW and SW research on the regional scale necessarily must move beyond the hydrological aspects, by collaborating with the social sciences and increasing the interaction between science and society in general, is also discussed. The typical elements of an ideal interdisciplinary workflow are presented and their relevance with respect to the integration of GW and SW is discussed. The overall conclusions are that GW hydrology and SW hydrogeology study rather different objects of interest, using different types of observation, working on different problem settings

  11. Overview of Gas Research Institute's industrial utilization research and development program

    Energy Technology Data Exchange (ETDEWEB)

    Tabb, E S

    1982-05-01

    A combination of technical, economic, political, and environmental constraints hamper industry's ability to use natural gas efficiently. Although the industrial sector has the best potential to absorb the current surplus of natural gas, many industrial users are disenchanged with the high cost, low efficiency, and environmental problems associated with the existing inventory of gas-fired process systems. Consequently, it is essential for an organization like Gas Research Institute (GRI), which has a national scope and a mandate to generate energy end-use benefits for the industrial gas consumer, to assume a leadership role in the development program aimed, not only at upgrading the energy efficiency of industrial process equipment, but at increasing its production capability while meeting environmental standards.

  12. Creative Research: The Theory and Practice of Research for the Creative Industries

    NARCIS (Netherlands)

    Kathryn Best

    2011-01-01

    When conducting research in and for the creative industries, there are a wealth of different possible research approaches that can be taken - reflecting the diverse nature of the disciplines (design, arts and crafts, advertising, architecture, fashion, film, music, TV, radio performing arts,

  13. Research of grasping algorithm based on scara industrial robot

    Science.gov (United States)

    Peng, Tao; Zuo, Ping; Yang, Hai

    2018-04-01

    As the tobacco industry grows, facing the challenge of the international tobacco giant, efficient logistics service is one of the key factors. How to complete the tobacco sorting task of efficient economy is the goal of tobacco sorting and optimization research. Now the cigarette distribution system uses a single line to carry out the single brand sorting task, this article adopts a single line to realize the cigarette sorting task of different brands. Using scara robot special algorithm for sorting and packaging, the optimization scheme significantly enhances the indicators of smoke sorting system. Saving labor productivity, obviously improve production efficiency.

  14. STUDY OF TRENDS AND PERSPECTIVES OF INDUSTRIAL ENGINEERING RESEARCH

    Directory of Open Access Journals (Sweden)

    H. Dastkhan

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Industrial engineering is an engineering discipline which, because of its multi-disciplinary nature, has played an important role in the development and optimization of different systems at macro and micro levels. In this paper, the results of a research to study the position and trend of Industrial Engineering research in recent years are described. The data from a sample of 7 114 IE-related articles from international journals during the last 27 years were used for the analysis. The results showed that the development of IE in many countries has a strong correlation with their industrial and economic development. However, IE research topics are spreading in other management and engineering departments and so there is a need to redefine the discipline and its specific areas of interest. According to the prediction made using time series analysis, the most favorite fields of IE research in future will be on subjects related to information technology, intelligent systems, optimization, quality, and supply chain management.

    AFRIKAANSE OPSOMMING: Bedryfsingenieurswese is 'n ingenieursdissipline wat vanweë die multi-dissiplinêre aard daarvan 'n belangrike rol gespeel het in die optimisering van verskillende sisteme op makroen mikrovlak. Hierdie artikel hou die resultate voor van 'n navorsingsprojek wat onderneem is om die posisie en rigting van Bedryfsingenieursnavorsing in onlangse jare te bepaal. Die data van 'n monster van 7 114 Bedryfsingenieursverwante artikels wat verskyn het in internasionale joernale oor die afgelope 27 jaar is gebruik vir die ontleding. Die resultate toon dat die groei van Bedryfsingenieurswese in verskeie lande sterk korreleer met industriële en ekonomiese ontwikkeling. Tog blyk dit dat die navorsingsonderwerpe van Bedryfsingenieurswese sprei na ander bestuurs- en ingenieursdepartemente en dus bestaan daar ‘n nodigheid om die dissipline en die spesifieke belangstellingsvelde te herdefinieer

  15. The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-08-15

    for radiation protection and safety provided by the IAEA to its Member States. This publication was developed under the IAEA’s statutory responsibility to provide for the worldwide application of safety standards for the protection of people against exposure to ionizing radiation. It details the results of the Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR) project during 2009–2012 and, in particular, the activities of the Working Group on Industrial Radiography (WGIR). The ISEMIR project arose from the Occupational Radiation Protection International Action Plan (approved by the IAEA Board of Governors in September 2003), which identified in Action 7 the need to establish networks for the exchange of information on experience and lessons learned between interested parties.

  16. The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

    International Nuclear Information System (INIS)

    2014-08-01

    for radiation protection and safety provided by the IAEA to its Member States. This publication was developed under the IAEA’s statutory responsibility to provide for the worldwide application of safety standards for the protection of people against exposure to ionizing radiation. It details the results of the Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR) project during 2009–2012 and, in particular, the activities of the Working Group on Industrial Radiography (WGIR). The ISEMIR project arose from the Occupational Radiation Protection International Action Plan (approved by the IAEA Board of Governors in September 2003), which identified in Action 7 the need to establish networks for the exchange of information on experience and lessons learned between interested parties

  17. Hydrogeology, groundwater seepage, nitrate distribution, and flux at the Raleigh hydrologic research station, Wake County, North Carolina, 2005-2007

    Science.gov (United States)

    McSwain, Kristen Bukowski; Bolich, Richard E.; Chapman, Melinda J.

    2013-01-01

    rom 2005 to 2007, the U.S. Geological Survey and the North Carolina Department of Environment and Natural Resources, Division of Water Quality, conducted a study to describe the geologic framework, measure groundwater quality, characterize the groundwater-flow system, and describe the groundwater/surface-water interaction at the 60-acre Raleigh hydrogeologic research station (RHRS) located at the Neuse River Waste Water Treatment Plant in eastern Wake County, North Carolina. Previous studies have shown that the local groundwater quality of the surficial and bedrock aquifers at the RHRS had been affected by high levels of nutrients. Geologic, hydrologic, and water-quality data were collected from 3 coreholes, 12 wells, and 4 piezometers at 3 well clusters, as well as from 2 surface-water sites, 2 multiport piezometers, and 80 discrete locations in the streambed of the Neuse River. Data collected were used to evaluate the three primary zones of the Piedmont aquifer (regolith, transition zone, and fractured bedrock) and characterize the interaction of groundwater and surface water as a mechanism of nutrient transport to the Neuse River. A conceptual hydrogeologic cross section across the RHRS was constructed using new and existing data. Two previously unmapped north striking, nearly vertical diabase dikes intrude the granite beneath the site. Groundwater within the diabase dike appeared to be hydraulically isolated from the surrounding granite bedrock and regolith. A correlation exists between foliation and fracture orientation, with most fractures striking parallel to foliation. Flowmeter logging in two of the bedrock wells indicated that not all of the water-bearing fractures labeled as water bearing were hydraulically active, even when stressed by pumping. Groundwater levels measured in wells at the RHRS displayed climatic and seasonal trends, with elevated groundwater levels occurring during the late spring and declining to a low in the late fall. Vertical

  18. Impact of landfills, domestic and industrial waste on the aquifer in Raipur city and contribution of karst feature to the groundwater contaminations

    International Nuclear Information System (INIS)

    Sinha, U.K.; Deodhar, A.; Kulkarni, U.P.; Sharma, Suman

    2004-01-01

    Karst features (landscapes that result from dissolution and surface drainage of carbonate terrains) are potentially a large source of water. They have distinctive features, which distinguish them from fissured and porous aquifers. These features include a general lack of permanent surface streams, existence of surface holes into which surface stream sink, presence of underground big channels and large springs etc. Karst environments are used for potable water supply as well as disposal sites for municipal, agricultural and industrial waste dumping. The peculiar geomorphologic and hydrological features of karst make them highly vulnerable for groundwater pollution. The ease with which they can be polluted make a fit case of taking protection measures in advance. Raipur is a major business, educational center as well as capital city of Chhattisgarh state in India. The city has been rapidly expanding during the last two decades, as a result of rapid industrialisation and various economic developments. Wastes generated from a wide variety of industrial, commercial, agricultural and domestic activities are dumped into pits or low - lying area around the Raipur City. The climate in the area is characterised by very hot summer and well distributed rain over four months during monsoon season. Monsoon precipitation begins from mid June and generally remains active till the end of September. The average annual precipitation is ∼1250 mm. In the study area, groundwater lies in the karstified nature of geological formation and is naturally susceptible to contamination by landfills, domestic and industrial wastes. The karstification feature is exposed to the surface in Raipur city at many places. Environmental isotopes ( 2 H, 3 H, 18 O and 13 C) as well as chemistry of the water samples were used to identify a few places, which are prone to contamination in Raipur city. Deterioration of the groundwater quality is not alarming due to thin shale (impervious layer) cover over the

  19. Microbial community response reveals underlying mechanism of industrial-scale manganese sand biofilters used for the simultaneous removal of iron, manganese and ammonia from groundwater.

    Science.gov (United States)

    Zhang, Yu; Sun, Rui; Zhou, Aijuan; Zhang, Jiaguang; Luan, Yunbo; Jia, Jianna; Yue, Xiuping; Zhang, Jie

    2018-01-08

    Most studies have employed aeration-biofiltration process for the simultaneous removal of iron, manganese and ammonia in groundwater. However, what's inside the "black box", i.e., the potential contribution of functional microorganisms behavior and interactions have seldom been investigated. Moreover, little attention has been paid to the correlations between environmental variables and functional microorganisms. In this study, the performance of industrial-scale biofilters for the contaminated groundwater treatment was studied. The effluent were all far below the permitted concentration level in the current drinking water standard. Pyrosequencing illustrated that shifts in microbial community structure were observed in the microbial samples from different depths of filter. Microbial networks showed that the microbial community structure in the middle- and deep-layer samples was similar, in which a wide range of manganese-oxidizing bacteria was identified. By contrast, canonical correlation analysis showed that the bacteria capable of ammonia-oxidizing and nitrification was enriched in the upper-layer, i.e., Propionibacterium, Nitrosomonas, Nitrosomonas and Candidatus Nitrotoga. The stable biofilm on the biofilter media, created by certain microorganisms from the groundwater microflora, played a crucial role in the simultaneous removal of the three pollutants.

  20. On recent progress using QCLs for molecular trace gas detection - from basic research to industrial applicaitons

    NARCIS (Netherlands)

    Röpcke, J.; Davies, P.; Hempel, F.; Hübner, M.; Glitsch, S.; Lang, N.; Nägele, M.; Rousseau, A.; Wege, S.; Welzel, S.

    2010-01-01

    Quantum Cascade Lasers offer attractive options for applications of MIR absorption spectroscopy for basic research and industrial process control. The contribution reviews applications for plasma diagnostics and trace gas monitoring in research and industry.

  1. Rational Exploitation and Utilizing of Groundwater in Jiangsu Coastal Area

    Science.gov (United States)

    Kang, B.; Lin, X.

    2017-12-01

    Jiangsu coastal area is located in the southeast coast of China, where is a new industrial base and an important coastal and Land Resources Development Zone of China. In the areas with strong human exploitation activities, regional groundwater evolution is obviously affected by human activities. In order to solve the environmental geological problems caused by groundwater exploitation fundamentally, we must find out the forming conditions of regional groundwater hydrodynamic field, and the impact of human activities on groundwater hydrodynamic field evolution and hydrogeochemical evolition. Based on these results, scientific management and reasonable exploitation of the regional groundwater resources can be provided for the utilization. Taking the coastal area of Jiangsu as the research area, we investigate and analyze of the regional hydrogeological conditions. The numerical simulation model of groundwater flow was established according to the water power, chemical and isotopic methods, the conditions of water flow and the influence of hydrodynamic field on the water chemical field. We predict the evolution of regional groundwater dynamics under the influence of human activities and climate change and evaluate the influence of groundwater dynamic field evolution on the environmental geological problems caused by groundwater exploitation under various conditions. We get the following conclusions: Three groundwater exploitation optimal schemes were established. The groundwater salinization was taken as the primary control condition. The substitution model was proposed to model groundwater exploitation and water level changes by BP network method.Then genetic algorithm was used to solve the optimization solution. Three groundwater exploitation optimal schemes were submit to local water resource management. The first sheme was used to solve the groundwater salinization problem. The second sheme focused on dual water supply. The third sheme concerned on emergency water

  2. Industry Research and Recommendations for Small Buildings and Small Portfolios

    Energy Technology Data Exchange (ETDEWEB)

    Langner, Rois [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hendron, Bob [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Lab. (NREL), Golden, CO (United States); Huppert, Mark [National Trust for Historic Preservation, Washington, DC (United States); Cochrane, Ric [National Trust for Historic Preservation, Washington, DC (United States)

    2013-12-01

    Small buildings have been left behind in the energy efficiency marketplace because financial and technical resources have flowed to larger commercial buildings. DOE's Building Technologies Office works with the commercial building industry to accelerate the uptake of energy efficiency technologies and techniques in existing and new commercial buildings (DOE 2013). BTO recognizes the SBSP sector'spotential for significant energy savings and the need for investments in resources that are tailored to this sector's unique needs. The industry research and recommendations described in this report identify potential approaches and strategic priorities that BTO could explore over the next 3-5 years that will support the implementation of high-potential energy efficiency opportunities for thisimportant sector. DOE is uniquely positioned to provide national leadership, objective information, and innovative tools, technologies, and services to support cost-effective energy savings in the fragmented and complex SBSP sector. Properly deployed, the DOE effort could enhance and complement current energy efficiency approaches. Small portfolios are loosely and qualitatively defined asportfolios of buildings that include only a small number of small buildings. This distinction is important because the report targets portfolio owners and managers who generally do not have staff and other resources to track energy use and pursue energy efficiency solutions.

  3. Creative Research: The Theory and Practice of Research for the Creative Industries

    OpenAIRE

    Best, Kathryn

    2011-01-01

    When conducting research in and for the creative industries, there are a wealth of different possible research approaches that can be taken - reflecting the diverse nature of the disciplines (design, arts and crafts, advertising, architecture, fashion, film, music, TV, radio performing arts, publishing and interactive software) and academic contexts (art schools, business schools and universities) involved. The result is that there are variations in the emphasis and approach taken to how stud...

  4. Saline groundwater in crystalline bedrock

    International Nuclear Information System (INIS)

    Lampen, P.

    1992-11-01

    The State-of-art report describes research made on deep saline groundwaters and brines found in crystalline bedrock, mainly in site studies for nuclear waste disposal. The occurrence, definitions and classifications of saline groundwaters are reviewed with a special emphasis on the different theories concerning the origins of saline groundwaters. Studies of the saline groundwaters in Finland and Sweden have been reviewed more thoroughly. Also the mixing of different bodies of groundwaters, observations of the contact of saline groundwaters and permafrost, and the geochemical modelling of saline groundwaters as well as the future trends of research have been discussed. (orig.)

  5. Research on Monte Carlo simulation method of industry CT system

    International Nuclear Information System (INIS)

    Li Junli; Zeng Zhi; Qui Rui; Wu Zhen; Li Chunyan

    2010-01-01

    There are a series of radiation physical problems in the design and production of industry CT system (ICTS), including limit quality index analysis; the effect of scattering, efficiency of detectors and crosstalk to the system. Usually the Monte Carlo (MC) Method is applied to resolve these problems. Most of them are of little probability, so direct simulation is very difficult, and existing MC methods and programs can't meet the needs. To resolve these difficulties, particle flux point auto-important sampling (PFPAIS) is given on the basis of auto-important sampling. Then, on the basis of PFPAIS, a particular ICTS simulation method: MCCT is realized. Compared with existing MC methods, MCCT is proved to be able to simulate the ICTS more exactly and effectively. Furthermore, the effects of all kinds of disturbances of ICTS are simulated and analyzed by MCCT. To some extent, MCCT can guide the research of the radiation physical problems in ICTS. (author)

  6. OpenFOAM: Open source CFD in research and industry

    Science.gov (United States)

    Jasak, Hrvoje

    2009-12-01

    The current focus of development in industrial Computational Fluid Dynamics (CFD) is integration of CFD into Computer-Aided product development, geometrical optimisation, robust design and similar. On the other hand, in CFD research aims to extend the boundaries ofpractical engineering use in "non-traditional " areas. Requirements of computational flexibility and code integration are contradictory: a change of coding paradigm, with object orientation, library components, equation mimicking is proposed as a way forward. This paper describes OpenFOAM, a C++ object oriented library for Computational Continuum Mechanics (CCM) developed by the author. Efficient and flexible implementation of complex physical models is achieved by mimicking the form ofpartial differential equation in software, with code functionality provided in library form. Open Source deployment and development model allows the user to achieve desired versatility in physical modeling without the sacrifice of complex geometry support and execution efficiency.

  7. OpenFOAM: Open source CFD in research and industry

    Directory of Open Access Journals (Sweden)

    Hrvoje Jasak

    2009-12-01

    Full Text Available The current focus of development in industrial Computational Fluid Dynamics (CFD is integration of CFD into Computer-Aided product development, geometrical optimisation, robust design and similar. On the other hand, in CFD research aims to extend the boundaries of practical engineering use in “non-traditional” areas. Requirements of computational flexibility and code integration are contradictory: a change of coding paradigm, with object orientation, library components, equation mimicking is proposed as a way forward. This paper describes OpenFOAM, a C++ object oriented library for Computational Continuum Mechanics (CCM developed by the author. Efficient and flexible implementation of complex physical models is achieved by mimicking the form of partial differential equation in software, with code functionality provided in library form. Open Source deployment and development model allows the user to achieve desired versatility in physical modeling without the sacrifice of complex geometry support and execution efficiency.

  8. Manufacturing radioactive material for medical, research and industrial applications

    International Nuclear Information System (INIS)

    Seidel, C.W.

    1992-01-01

    Hospitals, clinics and other medical complexes are among the most extensive users of radioactive material. Nuclear medicine uses radioactive solutions of Tc-99m, Tl-201, Ga-67, I-123, Xe-133 and other radiopharmaceuticals as diagnostic tools to evaluate dynamic functions of various organs in the body, detect cancerous tumors, sites of infection or other bodily dysfunctions. Examples of monitoring blood flow to the brain of a cocaine addict will be shown. Many different radionuclides are also produced for life science research and industrial applications. Some require long irradiations and are needed only periodically. Radiopharmaceutical manufactures look for reliable suppliers that can produce quality product at a reasonable cost. Worldwide production of the processed and unprocessed radionuclides and the enriched stable nuclides that are the target materials used in the accelerators and reactors around the world will be discussed. (author)

  9. Boundary delineation for regional groundwater flow through geographic information system (Contract research)

    International Nuclear Information System (INIS)

    Yamakawa, Tadashi; Munakata, Masahiro; Kimura, Hideo; Hyodo, Hiroshi

    2007-03-01

    Radionuclide migration toward the human environment is to be assessed as the part of long-term safety assessments of geologic disposal of radioactive waste. Geologic processes, which include volcanic activity, hydrothermal activity, seismicity and deformation, bring about hydrogeologic changes in the regional groundwater flow system around a repository site. Groundwater flow systems in Japan have been studied in several sites such as Tono mine, Kamaishi mine and Horonobe area, but methodology of studies in these sites does not have fully developed. This study was conducted to develop methodologies of boundary delineation for regional groundwater flow systems. Geographic Information System, GIS, was applied using available topographic, hydrologic and geologic data for an area of interest. Miyakoji in the Abukuma Mountains was selected as the area, for the reason of its simple geologic setting formed by granitic rocks and topographically gentle hills of drainage basin. Data used in this study cover topographic sheets, digital elevation model, satellite imagery, geologic maps, topographic classification maps, soil distribution maps and landuse maps. Through the GIS techniques using these data, thematic maps on topographic features, surface conditions, land coverage, geology and geologic structure and weathered crust were developed, and these thematic maps were further applied to extract four factors affecting the regional groundwater flows: topographic condition, precipitation recharge, fracture characteristics and potential flows. The present study revealed that, taking the potential groundwater flows and characteristics of fractured zones in the area into consideration, the groundwater flow system in Miyakoji drainage basin should be bounded by the Otakine Mountain and the northern part of Tokoha Drainage Basin. The delineated area is larger than understood before. (author)

  10. THE ROLE OF RESEARCH IN RESHAPING TEXTILE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Adriana UNGUREANU

    2017-06-01

    Full Text Available Apparently, the international competition seems to be moved to the area of investments in new technologies waiting for results in the near future. Nanotechnology is by far the most wanted by investors. The last twenty years the investments in nanotechnology became the priority for all the developed states and this trend was followed by the less developed countries. At the opposite side, there are countries as Romania that seem to lose the start in front of those very active in this field. This paper tries to present the role of the Romanian Research and Development activity to reshape the textile industry through new technologies and nanotechnologies especially. To gather the proper information, the in-depth interview method was used. The conclusions reveal that state keeps the key for a good research activity by offering stable and consistent support. At the same time, a lot of measures or recommendations could be a pragmatic solution to take seriously the role of the research activity to bring its contribution for this big challenge.

  11. Decommissioning of Medical, Industrial and Research Facilities. Safety Guide

    International Nuclear Information System (INIS)

    2010-01-01

    Radioactive waste is produced in the generation of nuclear power and the use of radioactive materials in industry, research and medicine. The importance of the safe management of radioactive waste for the protection of human health and the environment has long been recognized, and considerable experience has been gained in this field. The IAEA's Radioactive Waste Safety Standards Programme aimed at establishing a coherent and comprehensive set of principles and requirements for the safe management of waste and formulating the guidelines necessary for their application. This is accomplished within the IAEA Safety Standards Series in an internally consistent set of publications that reflect an international consensus. The publications will provide Member States with a comprehensive series of internationally agreed publications to assist in the derivation of, and to complement, national criteria, standards and practices. The Safety Standards Series consists of three categories of publications: Safety Fundamentals, Safety Requirements and Safety Guides. With respect to the Radioactive Waste Safety Standards Programme, the set of publications is currently undergoing review to ensure a harmonized approach throughout the Safety Standards Series. This Safety Guide addresses the subject of decommissioning of medical, industrial and research facilities where radioactive materials and sources are produced, received, used and stored. It is intended to provide guidance to national authorities and operating organizations, particularly to those in developing countries (as such facilities are predominant in these countries), for the planning and safe management of the decommissioning of such facilities. The Safety Guide has been prepared through a series of Consultants meetings and a Technical Committee meeting

  12. [Example of product development by industry and research solidarity].

    Science.gov (United States)

    Seki, Masayoshi

    2014-01-01

    When the industrial firms develop the product, the research result from research institutions is used or to reflect the ideas from users on the developed product would be significant in order to improve the product. To state the software product which developed jointly as an example to describe the adopted development technique and its result, and to consider the modality of the industry solidarity seen from the company side and joint development. The software development methods have the merit and demerit and necessary to choose the optimal development technique by the system which develops. We have been jointly developed the dose distribution browsing software. As the software development method, we adopted the prototype model. In order to display the dose distribution information, it is necessary to load four objects which are CT-Image, Structure Set, RT-Plan, and RT-Dose, are displayed in a composite manner. The prototype model which is the development technique was adopted by this joint development was optimal especially to develop the dose distribution browsing software. In a prototype model, since the detail design was created based on the program source code after the program was finally completed, there was merit on the period shortening of document written and consist in design and implementation. This software eventually opened to the public as an open source. Based on this developed prototype software, the release version of the dose distribution browsing software was developed. Developing this type of novelty software, it normally takes two to three years, but since the joint development was adopted, it shortens the development period to one year. Shortening the development period was able to hold down to the minimum development cost for a company and thus, this will be reflected to the product price. The specialists make requests on the product from user's point of view are important, but increase in specialists as professionals for product

  13. Decommissioning of medical, industrial and research facilities. Safety guide

    International Nuclear Information System (INIS)

    2005-01-01

    Radioactive waste is produced in the generation of nuclear power and the use of radioactive materials in industry, research and medicine. The importance of the safe management of radioactive waste for the protection of human health and the environment has long been recognized, and considerable experience has been gained in this field. The IAEA's Radioactive Waste Safety Standards Programme aimed at establishing a coherent and comprehensive set of principles and requirements for the safe management of waste and formulating the guidelines necessary for their application. This is accomplished within the IAEA Safety Standards Series in an internally consistent set of publications that reflect an international consensus. The publications will provide Member States with a comprehensive series of internationally agreed publications to assist in the derivation of, and to complement, national criteria, standards and practices. The Safety Standards Series consists of three categories of publications: Safety Fundamentals, Safety Requirements and Safety Guides. With respect to the Radioactive Waste Safety Standards Programme, the set of publications is currently undergoing review to ensure a harmonized approach throughout the Safety Standards Series. This Safety Guide addresses the subject of decommissioning of medical, industrial and research facilities where radioactive materials and sources are produced, received, used and stored. It is intended to provide guidance to national authorities and operating organizations, particularly to those in developing countries (as such facilities are predominant in these countries), for the planning and safe management of the decommissioning of such facilities. The Safety Guide has been prepared through a series of Consultants meetings and a Technical Committee meeting

  14. Nanotechnology research and development for military and industrial applications

    Science.gov (United States)

    Ruffin, Paul B.; Brantley, Christina L.; Edwards, Eugene; Roberts, J. Keith; Chew, William; Warren, Larry C.; Ashley, Paul R.; Everitt, Henry O.; Webster, Eric; Foreman, John V.; Sanghadasa, Mohan; Crutcher, Sihon H.; Temmen, Mark G.; Varadan, Vijay; Hayduke, Devlin; Wu, Pae C.; Khoury, Christopher G.; Yang, Yang; Kim, Tong-Ho; Vo-Dinh, Tuan; Brown, April S.; Callahan, John

    2011-04-01

    Researchers at the Army Aviation and Missile Research, Development, and Engineering Center (AMRDEC) have initiated multidiscipline efforts to develop nano-based structures and components for insertion into advanced missile, aviation, and autonomous air and ground systems. The objective of the research is to exploit unique phenomena for the development of novel technology to enhance warfighter capabilities and produce precision weapons. The key technology areas that the authors are exploring include nano-based microsensors, nano-energetics, nano-batteries, nano-composites, and nano-plasmonics. By integrating nano-based devices, structures, and materials into weaponry, the Army can revolutionize existing (and future) missile systems by significantly reducing the size, weight and cost. The major research thrust areas include the development of chemical sensors to detect rocket motor off-gassing and toxic industrial chemicals; the development of highly sensitive/selective, self-powered miniaturized acoustic sensors for battlefield surveillance and reconnaissance; the development of a minimum signature solid propellant with increased ballistic and physical properties that meet insensitive munitions requirements; the development of nano-structured material for higher voltage thermal batteries and higher energy density storage; the development of advanced composite materials that provide high frequency damping for inertial measurement units' packaging; and the development of metallic nanostructures for ultraviolet surface enhanced Raman spectroscopy. The current status of the overall AMRDEC Nanotechnology research efforts is disclosed in this paper. Critical technical challenges, for the various technologies, are presented. The authors' approach for overcoming technical barriers and achieving required performance is also discussed. Finally, the roadmap for each technology, as well as the overall program, is presented.

  15. West African Journal of Industrial and Academic Research: Editorial ...

    African Journals Online (AJOL)

    ... communications, state-of-the-art developments in Information and communications technology, ... physics, industrial electronics, management sciences and engineering, industry chemistry, general technology rocketry, space and ... application of communications and information technology to these fields of importance.

  16. West African Journal of Industrial and Academic Research

    African Journals Online (AJOL)

    ... communications, state-of-the-art developments in Information and communications technology, ... physics, industrial electronics, management sciences and engineering, industry chemistry, general technology rocketry, space and ... application of communications and information technology to these fields of importance.

  17. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

  18. Integration goes underground: A review of groundwater research in support of sustainable development in South Africa

    CSIR Research Space (South Africa)

    Colvin, C

    2008-11-01

    Full Text Available and services .Aquifers store huge volumes of water and act as nature’s dams: groundwater accounts for around 95% of available, usable freshwater. This storage can be enhanced by infiltrating or pumping water into aquifers, reducing the evaporation losses...

  19. [Research in the pharmaceutical industry cannot be objective].

    Science.gov (United States)

    Becker-Brüser, Wolfgang

    2010-01-01

    In the face of tight public budgets more and more studies are being funded by the pharmaceutical industry. At the same time responsibility for conducting company-funded trials is increasingly being shifted to contract research organisations. Pharmaceutical manufacturers sponsor trials that primarily pursue company interests. The dominance of company-funded research does not only have a bearing on the choice of study priorities, though. Company sponsorship also has an influence on the results of trials. Company-funded trials are four times more likely to find evidence in favour of the trial drug than studies funded by other sponsors. There are several contributory factors, from study design (design bias) to data manipulation. And non-publication (publication bias) can distort knowledge. As a result, it is largely impossible to reliably assess the benefit and harm of medical drugs on the basis of published trials. This will have repercussions for the reliability of meta-analyses, guidelines and patient information leaflets. One consequence may be treatment errors.

  20. Integrated design optimization research and development in an industrial environment

    Science.gov (United States)

    Kumar, V.; German, Marjorie D.; Lee, S.-J.

    1989-01-01

    An overview is given of a design optimization project that is in progress at the GE Research and Development Center for the past few years. The objective of this project is to develop a methodology and a software system for design automation and optimization of structural/mechanical components and systems. The effort focuses on research and development issues and also on optimization applications that can be related to real-life industrial design problems. The overall technical approach is based on integration of numerical optimization techniques, finite element methods, CAE and software engineering, and artificial intelligence/expert systems (AI/ES) concepts. The role of each of these engineering technologies in the development of a unified design methodology is illustrated. A software system DESIGN-OPT has been developed for both size and shape optimization of structural components subjected to static as well as dynamic loadings. By integrating this software with an automatic mesh generator, a geometric modeler and an attribute specification computer code, a software module SHAPE-OPT has been developed for shape optimization. Details of these software packages together with their applications to some 2- and 3-dimensional design problems are described.

  1. Industry Software Trustworthiness Criterion Research Based on Business Trustworthiness

    Science.gov (United States)

    Zhang, Jin; Liu, Jun-fei; Jiao, Hai-xing; Shen, Yi; Liu, Shu-yuan

    To industry software Trustworthiness problem, an idea aiming to business to construct industry software trustworthiness criterion is proposed. Based on the triangle model of "trustworthy grade definition-trustworthy evidence model-trustworthy evaluating", the idea of business trustworthiness is incarnated from different aspects of trustworthy triangle model for special industry software, power producing management system (PPMS). Business trustworthiness is the center in the constructed industry trustworthy software criterion. Fusing the international standard and industry rules, the constructed trustworthy criterion strengthens the maneuverability and reliability. Quantitive evaluating method makes the evaluating results be intuitionistic and comparable.

  2. Porewater and groundwater geochemistry at the Down Ampney fault research site

    International Nuclear Information System (INIS)

    Metcalfe, R.; Ross, C.A.M.; Cave, M.R.; Green, K.A.; Reeder, S.; Entwisle, D.C.

    1990-12-01

    A Jurassic sequence of mudrocks, siltstones and limestones, at Down Ampney, Gloucestershire, was investigated. The aim was to evaluate the importance of faults in mudrocks as conduits for direct groundwater flow, and the influence of such faults on solute transport. Chemical analysis of porewaters and groundwaters are reported. Porewaters were obtained for analysis by squeezing mudrock core samples, yielding 18.1-34.5% of the total porewater. The solutions were analysed for major and trace elements and stable O/H isotope compositions. These analyses are compared with analyses for conventional groundwater samples. Samples were taken from a borehole array which crossed a prominent east-west trending fault, with a northerly downthrow of c.48 m. Comparisons are made between pore- and ground- water samples from each side of the fault, and from the fault zone itself. Sulphate concentrations are greatly increased in porewaters from the fault zone in comparison with sulphate concentrations in porewaters remote from the fault. The concentrations of porewater cations are related to pH, which in turn can be related to sulphate concentrations, probably controlled by sulphide oxidation. Cation concentrations are controlled mainly by carbonate dissolution and cation exchange reactions, largely dependent upon pH. Porewater concentrations of Cl and Br increase downwards but away from the fault zones the concentration gradients with depth are twice those in the vicinity of the fault. This suggests that meteoric waters are conducted by the fault, although they also penetrate downwards throughout the area. Groundwater compositions bear no simple relationship to porewater compositions, except in the case of sulphate. In the fault zone this is invariably more dilute in groundwaters than in porewaters. (author)

  3. Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing

    Directory of Open Access Journals (Sweden)

    Adam Sanders

    2016-09-01

    Full Text Available Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industry 4.0 and lean manufacturing, and investigates whether Industry 4.0 is capable of implementing lean. Executing Industry 4.0 is a cost-intensive operation, and is met with reluctance from several manufacturers. This research also provides an important insight into manufacturers’ dilemma as to whether they can commit into Industry 4.0, considering the investment required and unperceived benefits. Design/methodology/approach: Lean manufacturing is first defined and different dimensions of lean are presented. Then Industry 4.0 is defined followed by representing its current status in Germany. The barriers for implementation of lean are analysed from the perspective of integration of resources. Literatures associated with Industry 4.0 are studied and suitable solution principles are identified to solve the abovementioned barriers of implementing lean. Findings: It is identified that researches and publications in the field of Industry 4.0 held answers to overcome the barriers of implementation of lean manufacturing. These potential solution principles prove the hypothesis that Industry 4.0 is indeed capable of implementing lean. It uncovers the fact that committing into Industry 4.0 makes a factory lean besides being smart. Originality/value: Individual researches have been done in various technologies allied with Industry 4.0, but the potential to execute lean manufacturing was not completely perceived. This paper bridges the gap between these two realms, and identifies

  4. Industry's demand for the BESSY synchrotron radiation (SR): approaches towards interlinking basic scientific research activities and industry

    International Nuclear Information System (INIS)

    Bierhals, R.; Schmoch, U.; Nick, D.; Pilorget, L.; Ritschel, C.; Walter, G.H.

    1994-08-01

    In Germany, industry's demand for synchrotron radiation (SR) is very limited, due to the current macroeconomic situation and the corporate strategy of potential SR users in industry. This is in contrast to the conditions in the USA (and Japan), where industrial enterprises more readily invest in and run their own long-term basic research projects for exploration of potential commercial applications according to their demands, with research goals pursued there and in Germany overlapping to a large extent. It cannot be expected that demand for SR from industry in Germany will ever come up to the level seen in the USA. In Germany, non-university research institutes are most likely to become an important group of potential users of SR. Substantially boosting the demand for SR from industry will need a change of macroeconomic framework conditions affecting the corporate strategy to the effect that industry will more strongly commit itself to and take up responsibility for application-oriented fundamental research and the corresponding technology transfer. This can be achieved by a policy providing both for institutional means and financial incentives. As to near-market, strategic technological developments, establishment of structures allowing direct cooperation of science and technology, for instance in the form of joint ventures, or underwriting agreements and corresponding supervisory boards, seem to be promising. As to basic-research-oriented promotion of research, a technology screening might lead to the selection of technology-relevant research goals, and corresponding financial support from a special fund. Such incentives for cooperative action by technology, science and the government will create novel types of research-industry interfaces in Germany between ''historical'' spheres of autonomy of research of industry and the scientific community. (orig.) [de

  5. Heavy metal(loid)s and organic contaminants in groundwater in the Pearl River Delta that has undergone three decades of urbanization and industrialization: Distributions, sources, and driving forces.

    Science.gov (United States)

    Huang, Guanxing; Zhang, Ming; Liu, Chunyan; Li, Liangping; Chen, Zongyu

    2018-09-01

    Urbanization and industrialization have increased groundwater resource demands, and may drive the change of heavy metal(loid)s and organic chemicals in groundwater in the Pearl River Delta (PRD), southern China. Thus, a comprehensive understanding of the distributions, sources, and driving forces of heavy metal(loid)s and organic chemicals in groundwater in the PRD is vital for water resource management in this region. In this study, eight heavy metal(loid)s and fifty-five organic chemicals in groundwater across the PRD were investigated. The results show that undrinkable groundwater related to heavy metal(loid)s was mainly due to high concentrations of Fe (19.3%) and As (6.8%). Eighteen organic contaminants were detected in groundwater in the PRD, where the most frequently detected organic contaminant was naphthalene, and its detection rate was 2.51%. In 5.3% of all groundwater samples, one or more organic contaminants were found. All detected organic contaminants, except ones without allowable limits, in groundwater were at concentrations below allowable limits of China. The mean concentrations of heavy metal(loid)s in granular aquifers were higher than those in fissured and karst aquifers, especially for Fe and As. Except Se, the mean concentrations of other heavy metal(loid)s and the frequency of detection of organic contaminants in groundwater in urbanized and peri-urban areas were higher than those in non-urbanized areas, especially for Hg, Co, and organic contaminants. Fe, As, and Se in groundwater mainly originated from the release of Fe/As/Se rich sediments. The former two were driven by reduction reactions, while the latter was driven by oxidation resulting from the infiltration of NO 3 - . In contrast, other five heavy metal(loid)s and organic contaminants in groundwater mainly originated from the anthropogenic sources, such as the infiltration of industrial sewage. It is evident that urbanization and industrialization are two powerful driving forces for

  6. Comparison of the availability of groundwater information sources in Poland with other European countries. Knowledge inventory for hydrogeology research - project KINDRA

    Science.gov (United States)

    Tomaszewska, Barbara; Dendys, Marta; Tyszer, Magdalena

    2017-11-01

    Regulations of the Water Framework Directive 200/60/EC (WFD) had been applied by European Union countries into their legislation system. However, it does not guarantee that the groundwater research has the same standard and quality in EU countries. KINDRA international research project was launched to assessment of existing groundwater-related practical and scientific knowledge based on a new Hydrogeological Research Classification System (HRC-SYS). This classification is supported by a web-service - the European Inventory of Groundwater Research (EIGR). The main goal of the project is implementation policy of optimization in groundwater research in EU. The preliminary result of survey about groundwater management shows that in Poland is a good state of implementation WFD. Good level of implementation is especially related with groundwater monitoring. It is because a lot of institutions and municipal entities carry out their tasks referring to quality or quantity assessment. Results of their works are published as reports, newsletters, maps, bulletins etc. These materials are potential source of information which can be a valuable contribution to EIGR. However, a lot of information are published only in polish language, so it is impossible to spread this knowledge in Europe.

  7. Comparison of the availability of groundwater information sources in Poland with other European countries. Knowledge inventory for hydrogeology research – project KINDRA

    Directory of Open Access Journals (Sweden)

    Tomaszewska Barbara

    2017-01-01

    Full Text Available Regulations of the Water Framework Directive 200/60/EC (WFD had been applied by European Union countries into their legislation system. However, it does not guarantee that the groundwater research has the same standard and quality in EU countries. KINDRA international research project was launched to assessment of existing groundwater-related practical and scientific knowledge based on a new Hydrogeological Research Classification System (HRC-SYS. This classification is supported by a web-service – the European Inventory of Groundwater Research (EIGR. The main goal of the project is implementation policy of optimization in groundwater research in EU. The preliminary result of survey about groundwater management shows that in Poland is a good state of implementation WFD. Good level of implementation is especially related with groundwater monitoring. It is because a lot of institutions and municipal entities carry out their tasks referring to quality or quantity assessment. Results of their works are published as reports, newsletters, maps, bulletins etc. These materials are potential source of information which can be a valuable contribution to EIGR. However, a lot of information are published only in polish language, so it is impossible to spread this knowledge in Europe.

  8. [Assessment of shallow groundwater nitrate concentrations in typical terrestrial ecosystems of Chinese Ecosystem Research Network (CERN) during 2004-2009].

    Science.gov (United States)

    Xu, Zhi-Wei; Zhang, Xin-Yu; Sun, Xiao-Min; Yuan, Guo-Fu; Wang, Sheng-Zhong; Liu, Wen-Hua

    2011-10-01

    The nitrate-N (NO3(-) -N) concentrations of 38 shallow groundwater wells from 31 of the typical terrestrial ecosystems on Chinese Ecosystem Research Network (CERN) were assessed using the monitoring data from 2004 to 2009. The results showed that the average values of NO3(-) -N concentrations were significantly higher in the agricultural (4.85 mg x L(-1) +/- 0.42 mg x L(-1)), desert (oasis) (3.72 mg x L(-1) +/- 0.42 mg x L(-1)) and urban ecosystems (3.77 mg x L(-1) 0.51 mg x L(-1)) than in the grass (1.59 mg x L(-1) +/- 0.35 mg L(-1)) and forest ecosystems (0.39 mg x L(-1) +/- 0.03 mg x L(-1)). Nitrate was the major form of nitrogen, with between 56% to 88% of nitrogen in the nitrate-N form in the shallow groundwater of desert (oasis), urban and agricultural ecosystems. Nitrate-N concentrations for some agricultural ecosystems (Ansai, Yanting, Yucheng) and desert (oasis) ecosystems (Cele, Linze, Akesu) analysis exceeded the 10 mg x L(-1) World Health Organization drinking water standards between 14.3% and 84.6%. Significant seasonality was found in Ansai, Fengqiu, Yanting agricultural ecosystems and the Beijing urban ecosystem using the relatively high frequency monitoring data, with the higher nitrate concentrations usually found during summer and winter months. The monitoring results indicated that the shallow groundwater of agricultural ecosystems was contaminated by agricultural management practices, i.e. fertilization, while the shallow groundwater of forest ecosystems was under natural condition with no contamination from human activities.

  9. Decommissioning of small medical, industrial and research facilities

    International Nuclear Information System (INIS)

    2003-01-01

    Most of the technical literature on decommissioning addresses the regulatory, organizational, technical and other aspects for large facilities such as nuclear power plants, reprocessing plants and relatively large prototype, research and test reactors. There are, however, a much larger number of licensed users of radioactive material in the fields of medicine, research and industry. Most of these nuclear facilities are smaller in size and complexity and may present a lower radiological risk during their decommissioning. Such facilities are located at research establishments, biological and medical laboratories, universities, medical centres, and industrial and manufacturing premises. They are often operated by users who have not been trained or are unfamiliar with the decommissioning, waste management and associated safety aspects of these types of facility at the end of their operating lives. Also, for many small users of radioactive material such as radiation sources, nuclear applications are a small part of the overall business or process and, although the operating safety requirements may be adhered to, concern or responsibility may not go much beyond this. There is concern that even the minimum requirements of decommissioning may be disregarded, resulting in avoidable delays, risks and safety implications (e.g. a loss of radioactive material and a loss of all records). Incidents have occurred in which persons have been injured or put at risk. It is recognized that the strategies and specific requirements for small facilities may be much less onerous than for large ones such as nuclear power plants or fuel processing facilities, but many of the same principles apply. There has been considerable attention given to nuclear facilities and many IAEA publications are complementary to this report. This report, however, attempts to give specific guidance for small facilities. 'Small' in this report does not necessarily mean small in size but generally modest in terms

  10. Industry interactions of the electronic structure research community in Europe

    OpenAIRE

    Goldbeck, Gerhard

    2014-01-01

    This report explores the interactions of the academic Psi-k community with industry. The evidence presented is mainly based on a semi-quantitative survey and interviews of network members. All Psi-k board, working group and advisory group members, a total of about 120 people were invited to take part in the study, and 40 people responded, representing more than 400 scientists from 33 different institutions in 12 European countries. 90% of respondents work with industry. Main industry sectors ...

  11. Nanoscience and nanotechnologies in food industries: opportunities and research trends

    Science.gov (United States)

    Ranjan, Shivendu; Dasgupta, Nandita; Chakraborty, Arkadyuti Roy; Melvin Samuel, S.; Ramalingam, Chidambaram; Shanker, Rishi; Kumar, Ashutosh

    2014-06-01

    Nanomaterials have gained importance in various fields of science, technology, medicine, colloid technologies, diagnostics, drug delivery, personal care applications and others due to their small size and unique physico-chemical characteristic. Apart from above mentioned area, it is also extensively being used in food sector specifically in preservation and packaging. The future applications in food can also be extended to improve the shelf life, food quality, safety, fortification and biosensors for contaminated or spoiled food or food packaging. Different types and shapes of nanomaterials are being employed depending upon the need and nature of the food. Characterisation of these nanomaterials is essential to understand the interaction with the food matrix and also with biological compartment. This review is focused on application of nanotechnology in food industries. It also gives insight on commercial products in market with usage of nanomaterials, current research and future aspects in these areas. Currently, they are being incorporated into commercial products at a faster rate than the development of knowledge and regulations to mitigate potential health and environmental impacts associated with their manufacturing, application and disposal. As nanomaterials are finding new application every day, care should be taken about their potential toxic effects.

  12. Geophysical research results of buried relief and distribution groundwater runoff of the Aragats massif

    OpenAIRE

    V.P. Vardanyan; A.H. Hovhannisyan

    2017-01-01

    Based on the synthesis and reinterpretation of long-term data of geophysical studies together with the hydrology - hydrological materials it has been received new data about the buried topography and spatial distribution of groundwater runoff of the Aragats massif. First of all, it requires to determine the structure of its buried relief, which is basically a regional relief aquitard. The underground water sources are considered to be precipitation on the massif (approximately 83% of the tota...

  13. Application of isotope techniques to groundwater pollution research for Xiangshan uranium ore field, China

    International Nuclear Information System (INIS)

    Liu Fulin; Liu Peilun; Zhu Chuande; Wu Xiaowei; Zeng Yinsheng

    1998-01-01

    The investigation of groundwater pollution due to uranium deposits focused on the most important uranium metallogenic area-Zhoujiashan district of Xiangshan uranium ore field, China. Groundwater collected from five completed exploration boreholes in the area is regarded as the pollution source and is traced and analysed by using isotope as well as radio-hydrochemical techniques. In addition, the pollution situation of a small uranium ore pile for heap-leaching and a big uranium ore open pit are monitored by the same techniques. It has been experimentally proven that the uranium concentration and the uranium isotope ratio 234 U/ 238 U in natural waters are two sensitive indicators of radioactive pollution in natural waters. It was concluded that under present conditions, exploration of uranium deposits may not cause serious groundwater pollution of radioactive elements (U, Ra, Rn and Th), however, it is difficult to avoid the serious surface water pollution coming from the exploitation of uranium ore by a big open pit. (author)

  14. Research on groundwater radon as a fluid phase precursor to earthquakes

    International Nuclear Information System (INIS)

    Teng, T.; Sun, L.

    1986-01-01

    Groundwater radon monitoring work carried out in southern California by the University of Southern California since 1974 is summarized here. This effort began with a sampling network over a locked segment of the San Andreas fault from Tejon to Cajon and was later expanded to cover part of the southern Transverse Mountain ranges. Groundwater samples were brought back weekly to the laboratory for high precision scintillation counting. Needs for more frequent sampling and less labor prompted the development of an economical and field worthy instrument known as the continuous radon monitor. About 10 have been installed in the network since early 1980. The groundwater radon content was found to show anomalous increases (mostly at a single station) before a number of moderate and nearby earthquakes. Our work is hampered by a lack of large earthquakes that may have a regional impact on radon anomalies and by the complexity of the underground hydrological regime. To circumvent this difficulty, we have chosen to monitor only deep artesian wells or hot spring wells

  15. Linking Civil Engineering Education And Research With Industry (Session Keynote)

    DEFF Research Database (Denmark)

    Virdi, Kuldeep

    Linking engineering education with industry has been a basic aim of educators almost from the beginning of modern degree programmes. In the USA, reference is often made to ‘co-operative education’, where students spend periods in industry within the duration of their stay in a university. Indeed...

  16. The Future for Industrial Engineers: Education and Research Opportunities

    Science.gov (United States)

    Mummolo, Giovanni

    2007-01-01

    EU graduation and the recruitment of industrial engineers (IEs) have been investigated. An increasing demand is observed for graduates in almost all industrial engineering (IE) subjects. The labour market in the EU is evolving towards the service sector even if manufacturing still represents a significant share of both IE employment and gross…

  17. Exploring research priorities for the North American hardwood industry

    Science.gov (United States)

    David Brinberg; Earl Kline; Delton Alderman; Philip Araman; Ed Cesa; Steve Milauskas; Tom Walthousen; Jan Wiedenbeck

    2008-01-01

    With the increase of globalization, the North American hardwood industry is facing many challenges to remain competitive and sustainable, facing drastic changes in the areas of labor, land, manufacturing, markets and marketing, and supply chain. The hardwood industry is especially vulnerable, with the influx of foreign manufacturers and suppliers with greater natural...

  18. Industrial workshop on LASL semiconductor radiation-detector research and development

    International Nuclear Information System (INIS)

    Endebrock, M.

    1978-11-01

    An Industrial Workshop on LASL Semiconductor Radiation Detector Research and Development was held at the Los Alamos Scientific Laboratory (LASL) in the spring of 1977. The purpose was to initiate communication between our detector research and development program and industry. LASL research programs were discussed with special emphasis on detector problems. Industrial needs and capabilities in detector research and development were also presented. Questions of technology transfer were addressed. The notes presented here are meant to be informal, as were the presentations

  19. Hydrochemical investigation at the Mizunami Underground Research Laboratory. Compilation of groundwater chemistry data in the Mizunami Group and the Toki Granite. Fiscal year 2014

    International Nuclear Information System (INIS)

    Hayashida, Kazuki; Munemoto, Takashi; Iwatsuki, Teruki; Aosai, Daisuke; Inui, Michiharu

    2016-06-01

    Japan Atomic Energy Agency has been investigating groundwater chemistry to understand the effect on excavating and maintenance of underground facilities as part of the Mizunami Underground Research Laboratory (MIU) Project in Mizunami, Gifu, Japan. In this report, we compiled data of groundwater chemistry obtained at the MIU in the fiscal year 2014. In terms of ensuring traceability of data, basic information (e.g. sampling location, sampling time, sampling method, analytical method) and methodology for quality control are described. (author)

  20. Hydrochemical investigation at the Mizunami Underground Research Laboratory. Compilation of groundwater chemistry data in the Mizunami group and the Toki granite. Fiscal year 2015

    International Nuclear Information System (INIS)

    Hayashida, Kazuki; Kato, Toshihiro; Munemoto, Takashi; Kubota, Mitsuru; Iwatsuki, Teruki; Aosai, Daisuke; Inui, Michiharu

    2017-03-01

    Japan Atomic Energy Agency has been investigating groundwater chemistry to understand the effect of excavation and maintenance of underground facilities as part of the Mizunami Underground Research Laboratory (MIU) Project in Mizunami, Gifu, Japan. In this report, we compiled data of groundwater chemistry obtained at the MIU in the fiscal year 2015. In terms of ensuring traceability of data, basic information (e.g. sampling location, sampling time, sampling method and analytical method) and methodology for quality control are described. (author)

  1. Hydrochemical investigation at the Mizunami Underground Research Laboratory. Compilation of groundwater chemistry data in the Mizunami group and the Toki granite. Fiscal year 2013

    International Nuclear Information System (INIS)

    Ohmori, Kazuaki; Hasegawa, Takashi; Munemoto, Takashi; Iwatsuki, Teruki; Masuda, Kaoru; Aosai, Daisuke; Inui, Michiharu

    2014-12-01

    Japan Atomic Energy Agency has been investigating groundwater chemistry to understand the effect on excavating and maintenance of underground facilities as part of the Mizunami Underground Research Laboratory (MIU) Project in Mizunami, Gifu, Japan. In this report, we compiled data of groundwater chemistry obtained at the MIU in the fiscal year 2013. In terms of ensuring traceability of data, basic information (e.g. sampling location, sampling time, sampling method, analytical method) and methodology for quality control are described. (author)

  2. Hydrochemical investigation at the Mizunami Underground Research Laboratory. Compilation of groundwater chemistry data in Mizunami group and Toki granite. Fiscal year 2012

    International Nuclear Information System (INIS)

    Ohmori, Kazuaki; Iwatsuki, Teruki; Shingu, Shinya; Masuda, Kaoru; Aosai, Daisuke; Inui, Michiharu

    2014-03-01

    Japan Atomic Energy Agency has been investigating groundwater chemistry on excavating and maintenance of underground facilities as part of the Mizunami Underground Research Laboratory (MIU) Project in Mizunami, Gifu, Japan. In this report, we compiled data of groundwater chemistry obtained at the MIU in the fiscal year 2012. In terms of ensuring traceability of data, basic information (e.g. sampling location, sampling time, sampling method, analytical method) and methodology for quality control are described. (author)

  3. Alberta immigrant integration into the petroleum industry : final research report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-02-15

    Alberta is in the midst of a labour shortage, especially in the petroleum industry. Traditionally, the petroleum industry has secured employees by hiring them away from competitors, service providers, other geographic locations, or other industries, mostly by escalating worker compensation. However, this is no longer seen to be a sustainable solution due to higher industry costs and inflation. A good opportunity exists for Alberta's oil and gas industry to address worker demand and minimize the negative impacts associated with current and future labour concerns by increasing the participation of workers who are under-represented in the workforce, such as Aboriginals, women, and internationally trained workers. This report presented the details of a project called the Alberta immigrant integration into the petroleum industry project in order to determine the tools, resources and support processes needed by petroleum industry employers to increase the employment and retention of internationally trained workers already living in Alberta into the upstream petroleum industry. The report outlined the gaps in information, tools, resources and services that were preventing the petroleum industry from taking advantage of the skills and experience offered by Alberta's labour pool of internationally trained workers in any significant way. The report also presented an overview of strategic priorities and recommended activities, duly endorsed by stakeholders, in order to improve the recruitment and integration of internationally trained workers into the petroleum industry workforce. It was concluded that employers who develop the skills and capability to effectively recruit and integrate internationally trained workers into their workforce will have a clear advantage in the competition for skilled employees. 3 refs., 2 figs.

  4. Research and technology management in the electricity industry methods, tools and case studies

    CERN Document Server

    Daim, Tugrul; Kim, Jisun

    2013-01-01

    Technologies such as renewable energy alternatives including wind, solar and biomass, storage technologies and electric engines are creating a different landscape for the  electricity industry. Using sources and ideas from technologies such as renewable energy alternatives, Research and Technology Management in the Electricity Industry explores a different landscape for this industry and applies it to the electric industry supported by real industry cases. Divided into three sections, Research and Technology Management in the Electricity Industry introduces a range of  methods and tools includ

  5. The Research of Scrapped Automobiles Recycling and Disassembling Industry Development Based on Auto Industry Chain

    Directory of Open Access Journals (Sweden)

    linhua Pang

    2015-01-01

    Full Text Available The number of China’s scrapped car is on an explosively growing trend, and the development of scrapped car recycling industry has a golden prospect. The current scrapped car recycling system is not perfect in our country, because related industries driven by market develop slowly, and there are some outstanding problems such as potential safety risks, environmental pollution and resource waste. The paper analyzes and studies the existing problems and countermeasures to investigate the development strategy of scrapped car recycling industry according to the whole automobile industry chain construction, technology and equipment conditions, policy guidance, etc. and at last explore the new industrial development pattern of serving automobile reverse design.

  6. Technology Transfer Opportunities: Automated Ground-Water Monitoring

    Science.gov (United States)

    Smith, Kirk P.; Granato, Gregory E.

    1997-01-01

    Introduction A new automated ground-water monitoring system developed by the U.S. Geological Survey (USGS) measures and records values of selected water-quality properties and constituents using protocols approved for manual sampling. Prototypes using the automated process have demonstrated the ability to increase the quantity and quality of data collected and have shown the potential for reducing labor and material costs for ground-water quality data collection. Automation of water-quality monitoring systems in the field, in laboratories, and in industry have increased data density and utility while reducing operating costs. Uses for an automated ground-water monitoring system include, (but are not limited to) monitoring ground-water quality for research, monitoring known or potential contaminant sites, such as near landfills, underground storage tanks, or other facilities where potential contaminants are stored, and as an early warning system monitoring groundwater quality near public water-supply wells.

  7. Industry-funded dermatologic research within academia in the United States: fiscal and ethical considerations.

    Science.gov (United States)

    Blank, I H

    1992-03-01

    Private-sector funding of biomedical research within academia may come from industry, foundations, the dermatologists themselves, and the public at large. Industry-funding is of benefit to both academia and industry. Industry may fund clinical and basic research and product testing. Industry is more willing to fund product testing and clinical research than basic research. Funds for dermatologic research may be obtained from manufacturers of drugs, medical devices, cosmetics, soaps, and detergents. Questions of academic freedom arise when research is funded by industry. The results of academic research are in the public domain; the results of intramural industry research are often proprietary, i.e., "trade secrets." When there is industry funding within academia, any restraints on publication should be held to a minimum and be temporary. Publication should occur in a timely fashion, although recognizing the need for delayed publication if the results concern patentable material. When there is a consultantship, pre-arranged terms of agreement may restrict communication. Patents usually are held by the investigator's institution. The funding company may be granted world-wide, royalty-bearing licenses. Conflicts of interest may arise during any research endeavor; this warrants close attention when the research is industry funded. Stock ownership, speaker fees, blind contracts, etc., should be avoided. In any communication, funding agreements should be stated. Indirect costs are a "necessary evil." There are non-research expenditures associated with all research projects for which the institution is justified in requesting compensation. Indirect costs must have definite connections to a project. As industrial funding of research within academia increases, various facets of the academia-industry relationship are receiving increasing attention. Several aspects of conflicts of interest and indirect costs must yet be resolved. When faced openly and directly, all of these

  8. Research on networked manufacturing system for reciprocating pump industry

    Science.gov (United States)

    Wu, Yangdong; Qi, Guoning; Xie, Qingsheng; Lu, Yujun

    2005-12-01

    Networked manufacturing is a trend of reciprocating pump industry. According to the enterprises' requirement, the architecture of networked manufacturing system for reciprocating pump industry was proposed, which composed of infrastructure layer, system management layer, application service layer and user layer. Its main functions included product data management, ASP service, business management, and customer relationship management, its physics framework was a multi-tier internet-based model; the concept of ASP service integration was put forward and its process model was also established. As a result, a networked manufacturing system aimed at the characteristics of reciprocating pump industry was built. By implementing this system, reciprocating pump industry can obtain a new way to fully utilize their own resources and enhance the capabilities to respond to the global market quickly.

  9. Microbiological research and development for the food industry

    National Research Council Canada - National Science Library

    Taormina, Peter J

    2013-01-01

    "This book serves as a primer and reference for industrial food microbiologists who typically gain the information provided through on-the-job experience or from a consultant instead of in the classroom...

  10. Nuclear waste disposal research and studies on natural groundwater colloids in Finland

    International Nuclear Information System (INIS)

    Vuorinen, U.

    1995-01-01

    In Finland there are two programmes carrying out studies on the safe disposal of nuclear fuel. One programme is funded by the nuclear power producing companies and the other one is publicly financed. Different natural sites are being investigated within the two programme of the nuclear power producing companies, while the publicly financed programme is concentrating its investigations on the Finnish natural analogue site at Palmottu. Both programmes are briefly discussed. Within both programmes some studies on natural groundwater colloids have been performed. However, a characterization of organic colloids has been performed on only one occasion so far. The colloid studies and results are discussed. (authors). 8 refs

  11. Research and photovoltaic industry at the United States; Recherche et industrie photovoltaique (PV) aux Etats-Unis

    Energy Technology Data Exchange (ETDEWEB)

    Lerouge, Ch; Herino, R; Delville, R; Allegre, R

    2006-06-15

    For a big country as the United States, the solar energy can be a solution for the air quality improvement, the greenhouse gases fight and the reduction of the dependence to the imported petroleum and also for the economic growth by the increase of the employment in the solar industry sector. This document takes stock on the photovoltaic in the United States in the industrial and research domains. The american photovoltaic industry is the third behind the Japan and the Germany. (A.L.B.)

  12. Differing Perceptions Concerning Research Integrity Between Universities and Industry: A Qualitative Study.

    Science.gov (United States)

    Godecharle, Simon; Nemery, Benoit; Dierickx, Kris

    2017-09-14

    Despite the ever increasing collaboration between industry and universities, the previous empirical studies on research integrity and misconduct excluded participants of biomedical industry. Hence, there is a lack of empirical data on how research managers and biomedical researchers active in industry perceive the issues of research integrity and misconduct, and whether or not their perspectives differ from those of researchers and research managers active in universities. If various standards concerning research integrity and misconduct are upheld between industry and universities, this might undermine research collaborations. Therefore we performed a qualitative study by conducting 22 semi-structured interviews in order to investigate and compare the perspectives and attitudes concerning the issues of research integrity and misconduct of research managers and biomedical researchers active in industry and universities. Our study showed clear discrepancies between both groups. Diverse strategies in order to manage research misconduct and to stimulate research integrity were observed. Different definitions of research misconduct were given, indicating that similar actions are judged heterogeneously. There were also differences at an individual level, whether the interviewees were active in industry or universities. Overall, the management of research integrity proves to be a difficult exercise, due to many diverse perspectives on several essential elements connected to research integrity and misconduct. A management policy that is not in line with the vision of the biomedical researchers and research managers is at risk of being inefficient.

  13. An agenda for research on the relationships between industrial design and performance

    NARCIS (Netherlands)

    Candi, M.; Gemser, G.

    2010-01-01

    This article proposes a research agenda for studying the relationships between industrial design and performance in the context of new product/service development. A review of existing research on relationships between industrial design and performance is used as a basis for identifying research

  14. Research on the development for emerging industries in Nantong under the national strategy

    Science.gov (United States)

    Li, Zhongnian; Qin, Yan; Zhang, Lijuan; Li, Tianying; Wang, Qing

    2017-08-01

    In this paper, according to the relevant national strategic emerging industry planning and policy, conducted in-depth research on the development of emerging industries in Nantong, and believes that current economic social development in Nantong has been entered into a new normal period, in the new period to “innovation” as the core characteristics, strategic emerging industry opportunities and challenges facing the industry. Therefore, Nantong should persist in innovation driven, focus on the cultivation and development of new industries, to provide new impetus to Nantong’s economic vitality and development. According to the development and upgrading of traditional industries, and expand the advantages of industry, cultivate new industries, for each kind of industry to come up with specific development strategies and suggestions: Nantong municipal government will be the seven emerging industries four in the industry (i.e., new material industry, new energy industry, new information technology industry, high-end equipment manufacturing industry) as the development object, further “bigger and stronger”, and strive to enhance the industrial scale and the formation of local characteristics as soon as possible.

  15. Advances in operations research in the oil and gas industry

    International Nuclear Information System (INIS)

    Breton, M.; Zaccour, G.

    1991-01-01

    Various theories and examples of modelling, forecasting and optimization designing in the different parts of the petroleum and gas industries are presented, stochastic programming for long term planning in the refining industry, stochastic model for gasoline blending, feedstock optimization, location and sizing for offshore platforms, hydrocarbon exploration simulation rapid method, valuation of oil field development leases, economic models for petroleum allocation, models for oil supply market, trade embargo game theory, stochastic programming of gas contract portfolio management, scheduling transportation of oil and gas, strategic planning in an oil pipeline company, simulation of offshore oil terminal systems, hierarchical selection of oil and gas distribution systems

  16. Innovation Systems Research in the Italian Food Industry

    OpenAIRE

    Ornella Wanda Maietta

    2014-01-01

    The objective of the paper is to determine the role that R&D networking, through the collaboration of firms with universities, plays among the determinants of product and process innovation in the Italian food and drink industry and how geographical proximity to a university affects both R&D university-industry collaboration and innovation. The data are sourced from the 7th (1995-1997), 8th (1998-2000), 9th (2001-2003) and 10th (2004-2006) waves of Capitalia survey data. The approach is a tri...

  17. Research and development of zirconium industry in China

    International Nuclear Information System (INIS)

    Liu Jianzhang; Tian Zhenye

    2001-01-01

    The development of uranium material for nuclear power and silicon material for information industry represents two revolutionary changes in the material field in 20-th century. The development of these kinds of materials not only brings about great revolution of technology in the material field, but also promotes the great advancement of the world economy. Zirconium or its alloy, as one of the most important material in atomic age, just as the same as foreign countries has been developed under promotion of nuclear submarine project in China, and building of civil nuclear power reactor then has been laid a solid foundation for zirconium industry and provide a broad market for zirconium material

  18. Preliminary research on groundwater flow characteristics of the low- and Intermediate-level radioactive waste disposal site

    International Nuclear Information System (INIS)

    Koh, Young Kwon; Bae, Dae Seok; Kim, Geon Young; Ryu, Ji Hoon; Park, Kyung Woo; Ji, Sung Hoon; Kim, Kyung Su

    2009-08-01

    Preliminary site survey and candidate survey complements the purpose of the current site selection and disposal place selected for the study because of hydraulic to the geological survey done for the general idea was brought in the field of geochemistry survey was made. Therefore, this report hydraulic - the underlying structure of the model deterministic deformation zone model to focus on the configuration kept, according to data survey by hydraulic and hydraulic rock star pitcher trying to figure out the scope of the structure factors were hydraulic. Groundwater and related land place shares characteristics of the existing data and complementary research and laboratory research performed on the basis of geochemical data, based on the following major finding were present

  19. Research on Dongguan Mobile Phone Industry Development Status from the Patent Perspective

    OpenAIRE

    Qiu Yu

    2017-01-01

    [Purpose/significance] Through the analysis of the patent of five Dongguan mobile phone industries, this paper aims at providing information references for the development of Dongguan mobile phone industry. [Method/process] This paper first introduced the basic information of the mobile phone industry in our country, selected Dongguan mobile phone industry patents as the research object, and analyzed overall development trend--the general situation and the trend of applicants, inventors and I...

  20. Operational research in practice: Consultancy in industry revisited

    NARCIS (Netherlands)

    Fortuin, L.; Zijlstra, M.

    2000-01-01

    Experiences of an OR group in a large industrial organisation, from 1981 to the middle of 1988, were described in a paper published in 1989. Much has changed since then: (1) having started as an internal staff department, the group has become an independent consultancy bureau, owing to the fact that

  1. Research and development in the electricity supply industry conference

    International Nuclear Information System (INIS)

    1995-01-01

    This document summarizes the views expressed in the conference papers. These are grouped into fuels for the future, coal fired powers stations, renewables, use of heat as a by-product of electricity generation, fuel cells, electric vehicles, and environmental issues in the electricity supply industry. The points and ideas from the two workshops held in conjunction with the conference are also summarized

  2. Thin layer activation techniques in research and industry

    International Nuclear Information System (INIS)

    Conlon, T.W.

    1993-01-01

    The following key application of thin layer activation technique (TLA) are discussed: ion-erosion in fusion tokamaks, bio-engineering technology, automobile industry. Future developments of the techniques, such as fission fragment TLA, multi-layer TLA and recoil implantation are discussed as well. 7 refs, 6 figs, 1 tab

  3. An initial research on solute migration model coupled with adsorption of surface complexation in groundwater

    International Nuclear Information System (INIS)

    Qian Tianwei; Chen Fanrong

    2003-01-01

    The influence of solution chemical action in groundwater on solute migration has attracted increasing public attention, especially adsorption action occurring on surface of solid phase and liquid phase, which has play a great role in solute migration. There are various interpretations on adsorption mechanism, in which surface complexion is one of successful hypothesis. This paper first establishes a geochemical model based on surface complexion and then coupled it with traditional advection-dispersion model to constitute a solute migration model, which can deal with surface complexion action. The simulated results fit very well with those obtained by the precursors, as compared with a published famous example, which indicates that the model set up by this paper is successful. (authors)

  4. Application of S. H. and O. stable isotopes to groundwater research in China

    International Nuclear Information System (INIS)

    Pan Shulan

    1988-01-01

    The δD, δ 18 O and δ 34 S of a lot of samples from the groundwater in the Tai-Yuan area have been determined. The precipitation line (in the Tai-Yuan area) we obtained is δD=7.6δ 18 O+10. A mixing line for west mountain karstic water and shallow water has been worked out, it is δD=5.6δ 18 O-16. It has been concluded that the quantity supplied by shallow water to Jin Spring is about 34%. Two karstic water systems are divided into the West Mountain system and East Mountain system. The Lan Spring belongs to the east one. S-isotope data indicates that there is less supply to the Lan Spring from the West Mountain system. Some sample preparation methods and mass spectrometric measurements in our laboratory are described. (author). 4 refs, 9 figs, 8 tabs

  5. Council for Scientific and Industrial Research annual report 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    The CSIR undertakes and manages broadly based scientific research, development and technology transfer in South Africa. The organisation is divided into four groups: Corporate Finance Management; Research Development and Implementation; Foundation for Research Development and Corporate Support Services. Research on coal is carried out by the Energy Technology Division which is part of the Research, Development and Implementation Group. This annual report reviews the work of the CSIR during 1987.

  6. Positioning and Priorities of Growth Management in Construction Industrialization: Chinese Firm-Level Empirical Research

    Directory of Open Access Journals (Sweden)

    Jingxiao Zhang

    2017-06-01

    Full Text Available The purpose of this research is to quantitatively evaluate the growth phase, position, and priorities of the industrialization policy management of the construction industry at firm level. The goal is to integrate quantitative dynamics into the policy-making process for sustainable policy development in future China. This research proposes an integrated framework, including growth management model and industrial policy evaluation method, to identify the challenges of construction industrialization and policy management. The research applies the mixed system method, which includes entropy method and average score method, to analyze the growth stage and major impact indexes targeting 327 survey samples. The empirical results show that the proposed conceptual framework and policy evaluation method could effectively determine the growth position and directions of the construction industrialization. For verification purpose, the study uses the local industry data from Shaanxi Province, China. The calculation results substantiate that the construction industry is in the middle section of the third growth phase. The comparison of the results from statistical methods shows that the local construction industry still needs substantial effort in policy management to improve its sustainable industrialization level. As countermeasures, the policy priorities should concentrate on: (1 enhancing effective cooperation among universities, research institutions and enterprises; (2 improving actions towards technology transfer into productivity; and (3 encouraging market acceptance of construction industrialization. This research complements the existing literature of policy evaluation of construction industrialization. Moreover, it provides theoretical and operational steps on industry policy evaluation and growth management framework, with accurate and ample data analysis on firm-level survey. Researchers and policy makers can use this research for further

  7. 2008-2010 Research Summary: Analysis of Demand Response Opportunities in California Industry

    Energy Technology Data Exchange (ETDEWEB)

    Goli, Sasank [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Olsen, Daniel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McKane, Aimee [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Piette, Mary Ann [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-08-01

    This report describes the work of the Industrial Demand Response (DR) Team of Lawrence Berkeley National Laboratory’s Demand Response Research Center (DRRC) from 2008-2010, in the context of its mandate to conduct and disseminate research that broadens the knowledge base of DR strategies, with a focus on the Industrial-Agricultural-Water (IAW) sector. Through research and case studies of industrial sectors and entities, the DRRC-IAW Team continued to assimilate knowledge on the feasibility of industrial DR strategies with an emphasis on technical and economic evaluation and worked to encourage implementation of these strategies.

  8. Currents in industrial mathematics from concepts to research to education

    CERN Document Server

    Prätzel-Wolters, Dieter

    2015-01-01

    Mathematics has many branches: there are the pure, the applied, and the applicable; the theoretical and the practical. There is mathematics for school, for college, and for industry. All these belong to the same family and are bound together by a "mathematical way of thinking." Some mathematicians devote themselves entirely to the well being of this family by preserving it, developing it, and teaching it to the next generation. Others use the familial attributes to help outsiders by taking up their problems and transforming them into mathematical questions in order to solve them. The work of these mathematicians is thus problem driven, based on mathematical models, and oriented on the goal of offering practicable solutions. This second group is sizeable; its members include almost all college graduates working in industry, in the private sector, or in the Fraunhofer Institutes, for example. This group is hardly visible, however, and one seldom hears its voices either. This book remedies this situation by rela...

  9. The Safe Use of Ultraviolet Lasers in Industry and Research

    International Nuclear Information System (INIS)

    Lowe, A.J.; O'Hagan, J.B.

    2000-01-01

    UV lasers are being applied to a number of industries, including metrology and manufacture. The safety issues from the use of such lasers are discussed. A risk assessment methodology is described which takes account of the different stages of the life cycle of the laser application, the different people at risk and the individual components of the laser application. In this way, the specific hazards can be identified and addresses to ensure that the risks are adequately managed. (author)

  10. Manufacturing Technology Research Needs of the Gear Industry

    Science.gov (United States)

    1987-12-31

    needs technical and financial help along with time to regain a little of its former position as a world class industry. The development of the National...8217 Association (BGMA) and the Instituite of Mechanical Engineers (IMechE) have recently jointly established the British Gear Assocation (BGA). Within the BGA is...Issues - Definition - Definition o Quality of Product or Function - Objectives - Bow are we Operating Now? o Response or Lead Time - Financial Impact

  11. Academic Centers and/as Industrial Consortia: US Microelectronics Research 1976-2016

    NARCIS (Netherlands)

    Mody, Cyrus C.M.

    2017-01-01

    In the U.S., in the late 1970s and early 1980s, academic research centers that were tightly linked to the semiconductor industry began to proliferate – at exactly the same time as the first academic start-up companies in biotech, and slightly before the first U.S. industrial semiconductor research

  12. University-Industry Research Collaboration: A Model to Assess University Capability

    Science.gov (United States)

    Abramo, Giovanni; D'Angelo, Ciriaco Andrea; Di Costa, Flavia

    2011-01-01

    Scholars and policy makers recognize that collaboration between industry and the public research institutions is a necessity for innovation and national economic development. This work presents an econometric model which expresses the university capability for collaboration with industry as a function of size, location and research quality. The…

  13. The Effects of University-Industry Relationships and Academic Research on Scientific Performance: Synergy or Substitution?

    Science.gov (United States)

    Manjarres-Henriquez, Liney; Gutierrez-Gracia, Antonio; Carrion-Garcia, Andres; Vega-Jurado, Jaider

    2009-01-01

    This paper evaluates whether university-industry relationships (UIR) and academic research activities have complementary effects on the scientific production of university lecturers. The analysis is based on a case study of two Spanish universities. We find that the effects of R&D contracts with industry, and academic research activity on…

  14. Effects of Changes in Irrigation Practices and Aquifer Development on Groundwater Discharge to the Jobos Bay National Estuarine Research Reserve near Salinas, Puerto Rico

    Science.gov (United States)

    Kuniansky, Eve L.; Rodriguez, Jose M.

    2010-01-01

    Since 1990, about 75 acres of black mangroves have died in the Jobos Bay National Estuarine Research Reserve near Salinas, Puerto Rico. Although many factors can contribute to the mortality of mangroves, changes in irrigation practices, rainfall, and water use resulted in as much as 25 feet of drawdown in the potentiometric surface of the aquifer in the vicinity of the reserve between 1986 and 2002. To clarify the issue, the U.S. Geological Survey, in cooperation with the Puerto Rico Department of Natural and Environmental Resources, conducted a study to ascertain how aquifer development and changes in irrigation practices have affected groundwater levels and groundwater flow to the Mar Negro area of the reserve. Changes in groundwater flow to the mangrove swamp and bay from 1986 to 2004 were estimated in this study by developing and calibrating a numerical groundwater flow model. The transient simulations indicate that prior to 1994, high irrigation return flows more than offset the effect of reduced groundwater withdrawals. In this case, the simulated discharge to the coast in the modeled area was 19 million gallons per day. From 1994 through 2004, furrow irrigation was completely replaced by micro-drip irrigation, thus eliminating return flows and the simulated average coastal discharge was 7 million gallons per day, a reduction of 63 percent. The simulated average groundwater discharge to the coastal mangrove swamps in the reserve from 1986 to 1993 was 2 million gallons per day, compared to an average simulated discharge of 0.2 million gallons per day from 1994 to 2004. The average annual rainfall for each of these periods was 38 inches. The groundwater discharge to the coastal mangrove swamps in the Jobos Bay National Estuarine Research Reserve was estimated at about 0.5 million gallons per day for 2003-2004 because of higher than average annual rainfall during these 2 years. The groundwater flow model was used to test five alternatives for increasing

  15. Industry, university and government partnership to address research, education and human resource challenges for nuclear industry in Canada

    International Nuclear Information System (INIS)

    Mathur, R.M.

    2004-01-01

    This paper describes the outcome of an important recent initiative of the Canadian nuclear industry to reinvigorate interest in education and collaborative research in prominent Canadian universities. This initiative has led to the formation of the University Network of Excellence in Nuclear Engineering (UNENE), incorporated in 2002. (author)

  16. Using and misusing marketing research in the healthcare industry.

    Science.gov (United States)

    Keckley, P H

    1985-12-01

    As competition grows in health care, marketing research, especially consumer attitude research, is becoming increasingly important to the hospital's success and even survival. However, in the research process, mistakes are often made that invalidate the usefulness of the research. Those involved in marketing research, therefore, must be aware of the possible techniques to be used, potential audiences to be surveyed, the limitations of computer analysis, and the difference between consumer attitudes and intentions, if the information to be collected is to be reliable and useful to the organization.

  17. Experience Exchange Group (EEG) Approach as a Means for Research to be rooted in Industry

    DEFF Research Database (Denmark)

    Bruun, Peter

    1997-01-01

    of preliminary studies found interesting to set up an EEG composed of representatives from industry and a researcher. In the paper some general research methods pertinent to the area industrial management are discussed. The EEG concept is introduced and characterised in comparison with the other methods. EEG...... activities are described and a tentative coupling to the phases in a research process is proposed. Following this is a discussion of methodological and quality requirements. It is considered how EEG activities could possibly contribute to an industrial rooted research. The paper ends up looking at future......The intention of this paper is to clarify if and how an Experience Exchange Group(EEG) can be involved in a research process in the area of industrial management. For exemplification of the topic an ongoing research in global manufacturing is referred to. In this research it was after a series...

  18. Application of positron emission tomography in industrial research

    International Nuclear Information System (INIS)

    Jonkers, G.; van den Bergen, E.A.; Vonkeman, K.A.

    1990-01-01

    Positron Emission computed Tomography (PET) is a relatively new imaging technique, exploiting the 511 keV annihilation radiation characteristic of positron emitters. Although exclusively used till now in the field of nuclear medicine, the application of PET for the non-invasive, in-situ visualisation of processes of industrial interest is challenging, because PET can in principle be used to obtain quantitative, 2D/3D images of the flow and distribution of fluids inside process units, whose steel walls may be up to several centimeters thick. With the aid of a NeuroECAT positron tomographer the PET technique has been utilised to image important (model) processes in the petrochemical industry, using physical labelling of the phase to be imaged. First, the displacement of a brine/surfactant phase, labelled with 66 Ga-EDTA, in a piece of reservoir rock was imaged. Secondly, the dehydration of water-in-oil emulsions was monitored dynamically by labelling the water phase with 68 Ga-EDTA. The second study in particular demonstrates that in the presence of noisy data the image reconstruction method utilised strongly influences the results obtained. With the advent of PET in nuclear medicine the availability of short-lived positron emitting nuclides like 11 C (t1/2 = 20 min), 13 N (t1/2 = 10 min) and 15 0 (t1/2 = 2 min) has increased considerably, allowing the investigation of industrially important reactions by chemical labelling. Utilising the NeuroECAT in a special mode, the catalytic oxidation of carbon monoxide could be imaged in a model tubular reactor by using 11 C-labelled CO, providing information about the kinetics of the individual reaction steps and interactions and about the degree of occupation of catalytically active sites. (author)

  19. Forum Notes: The 1999 environmental research and technology development forum for the upstream oil and gas industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-04

    This conference provided an opportunity to exchange information on current research and development projects regarding the environment and the petroleum industry. In addition to summaries of the various sessions, the booklet also includes a list of registrants and poster session participants. The conference was divided into the following three sessions: (1) site remediation, site restoration and groundwater, (2) ecological health, cumulative effects and agriculture, and (3) flaring, odour and greenhouse gas emissions. The session on site remediation heard papers that dealt with feedback on existing projects including soil quality guidelines for crude oil in agricultural soils, hydrophobicity, assessment of phytoremediation as an in-situ technique for cleaning sites polluted by oil, remediation using wetlands, land application of bioremediated soils, and flare pit characterization. The session on ecological health was treated to presentations describing research and development projects including the Eastern Slopes Grizzly Bear Project, the Native Prairie Revegetation Project, and the Caroline Livestock Study. The session on flaring and greenhouse gas emissions described research and development projects on dehydrator benzene emissions, monitoring of odour causing compounds, flare speciation, flare performance, improved liquid separation, alternate technologies, improved measurement of methane fugitive emissions from gas operations, and methane emissions from heavy oil operations.

  20. Forum Notes: The 1999 environmental research and technology development forum for the upstream oil and gas industry

    International Nuclear Information System (INIS)

    1999-01-01

    This conference provided an opportunity to exchange information on current research and development projects regarding the environment and the petroleum industry. In addition to summaries of the various sessions, the booklet also includes a list of registrants and poster session participants. The conference was divided into the following three sessions: (1) site remediation, site restoration and groundwater, (2) ecological health, cumulative effects and agriculture, and (3) flaring, odour and greenhouse gas emissions. The session on site remediation heard papers that dealt with feedback on existing projects including soil quality guidelines for crude oil in agricultural soils, hydrophobicity, assessment of phytoremediation as an in-situ technique for cleaning sites polluted by oil, remediation using wetlands, land application of bioremediated soils, and flare pit characterization. The session on ecological health was treated to presentations describing research and development projects including the Eastern Slopes Grizzly Bear Project, the Native Prairie Revegetation Project, and the Caroline Livestock Study. The session on flaring and greenhouse gas emissions described research and development projects on dehydrator benzene emissions, monitoring of odour causing compounds, flare speciation, flare performance, improved liquid separation, alternate technologies, improved measurement of methane fugitive emissions from gas operations, and methane emissions from heavy oil operations

  1. Tool Efficiency Analysis model research in SEMI industry

    Directory of Open Access Journals (Sweden)

    Lei Ma

    2018-01-01

    Full Text Available One of the key goals in SEMI industry is to improve equipment through put and ensure equipment production efficiency maximization. This paper is based on SEMI standards in semiconductor equipment control, defines the transaction rules between different tool states,and presents a TEA system model which is to analysis tool performance automatically based on finite state machine. The system was applied to fab tools and verified its effectiveness successfully, and obtained the parameter values used to measure the equipment performance, also including the advices of improvement.

  2. Research of scatter correction on industry computed tomography

    International Nuclear Information System (INIS)

    Sun Shaohua; Gao Wenhuan; Zhang Li; Chen Zhiqiang

    2002-01-01

    In the scanning process of industry computer tomography, scatter blurs the reconstructed image. The grey values of pixels in the reconstructed image are away from what is true and such effect need to be corrected. If the authors use the conventional method of deconvolution, many steps of iteration are needed and the computing time is not satisfactory. The author discusses a method combining Ordered Subsets Convex algorithm and scatter model to implement scatter correction and promising results are obtained in both speed and image quality

  3. Nanomaterials in Lubricants: An Industrial Perspective on Current Research

    Directory of Open Access Journals (Sweden)

    Boris Zhmud

    2013-11-01

    Full Text Available This paper presents an overview on the use of various classes of nanomaterials in lubricant formulations. The following classes of nanomaterials are considered: fullerenes, nanodiamonds, ultradispersed boric acid and polytetrafluoroethylene (PTFE. Current advances in using nanomaterials in engine oils, industrial lubricants and greases are discussed. Results of numerous studies combined with formulation experience of the authors strongly suggest that nanomaterials do indeed have potential for enhancing certain lubricant properties, yet there is a long way to go before balanced formulations are developed.

  4. Tobacco Research and Its Relevance to Science, Medicine and Industry

    Directory of Open Access Journals (Sweden)

    Tso TC

    2014-12-01

    Full Text Available This article is a historical review and a vision for the future of tobacco plant research. This is the perspective of an experienced tobacco scientist who devoted his total professional career to tobacco research. From the very beginning, pioneering tobacco research was the foundation of plant science at the dawn of modern development, in such areas as light, nutrition, genetics, growth control, disorders and metabolism. Tobacco research led to current advancements in plant biotechnology. In addition, tobacco plant research contributed significantly to public health research in radioactive elements, mycotoxins, and air pollutants. However, public support for tobacco research has today greatly declined to almost total elimination because of a sense of political correctness. This author points out that tobacco is one of the most valuable research tools, and is a most abundant source of scientific information. Research with tobacco plants will contribute far beyond the frontiers of agricultural science: tobacco can be a source of food supply with nutrition value similar to that of milk; tobacco can be a source of health supplies including medical chemicals and various vaccines; tobacco can be a source of biofuel. All we need is to treat tobacco with respect; the use of tobacco is only in its initial stages.

  5. Research on the groundwater flow dynamics of Lamas basin by isotope methods

    International Nuclear Information System (INIS)

    Onhon, E.; Sayin, M.; Basaran, N.; Can, D.; Yuce, G.; Pelen, N.; Kaplan, A.

    1996-01-01

    The main objective of Lamas Project is to define the relation between the recharge to highlands and the discharge realized by the springs along the Mediterranean coast and thus assist to the development of karst water resources by preparing a dependable evaluation of the water budget. The investigation area covers almost 4400 square kilometers where the elevation rises from 0 to 2900 m. Lamas is the main river crossing the area from northwest to southeast with a yield between 13.48 to 2.77 cu.m/s. the karstification in the area has at least reached 300 m in depth. The water samples were collected from 16 springs, 3 drilled wells, stream and two meteorological stations, to define the groundwater dynamics and investigate the relation between the sampling points and to assist the establishment of an evaluation in isotope hydrology. By taking into consideration the unmeasured discharges along the coast line, the infiltration from the precipitation is approximately 50-60 %. The water in the aquifer is isotopically affected by the infiltration of low altitude precipitation. The hydrogeological and isotope hydrology investigations have reached the conclusions that the karst water resources can be developed by drilling of deep wells near the karst springs. (author). 9 refs, 7 figs, 2 tabs

  6. Industrial Hygiene Group annual research report, FY 1981

    International Nuclear Information System (INIS)

    Jackson, J.O.; Ettinger, H.J.

    1982-10-01

    Field studies have been performed at several oil shale facilities to identify unique industrial hygiene problems and provide input to inhalation toxicology studies aimed at evaluating the hazards of materials associated with this developing technology. Aerosol physics support has also been provided to develop aerosol generation and animal exposure techniques for evaluating the toxicity of oil shale materials and manmade mineral fibers. As part of the effort to assure a safe, orderly, and timely development of various synfuels, field evaluation of indicator-sampling procedures was perfomed, and industrial hygiene work practices for two synfuel technologies are being prepared. Respirator studies are used to evaluate the performances of special devices (some of which are not in the existing government approval schedules) and of a proposed test procedures for self-contained breathing apparatus. An approval procedure is being developed for air-purifying respirators required for protection against radioiodine, evaluating the adequacy of respirator programs at the Nuclear Regulatory Commission licensee facilities, and developing a program for respirator use under emergency situations. A new aerosol size-characterization stack sampler has been designed, and potential instrument changes to aerosol size monitoring for filter testing are being evaluated. Material permeability tests have identified the protection afforded by protective clothing materials, and improved analytical procedures have been developed for pentachlorophenol and plutonium

  7. Cooperation of Nuclear Industrial, Academic and Research Organizations

    International Nuclear Information System (INIS)

    Kang, Chang Sun

    1987-01-01

    In 1980's, however, the industry atmosphere has been slowly changing since advanced countries become more protective in high tech releases to economically competing countries like Korea. Meanwhile, Korea itself is in the stage that per-capita income exceeds 2,000 dollars, and starts realizing that the 'technology self-reliance' is the only solution for overcoming the present situation so as to become one of those developed countries. Towards this goal of technology self-reliance, our industries and government bodies are working together to develop an extensive implementation program. Korea is very poor in natural resources and capital. Fortunately, however, Korea has abundant well-educated and disciplined human resources. Therefore, the appropriate utilization of human resources is the only and natural solution for Korea's emerging into an advanced country after the turn of this century. KEPCO is the only utility company in Korea which produces and distributes the electricity. The first priority of the utility company is to provide the consumers with a good quality electricity as economically as possible in timely manner, which requires the safe and reliable operation of power plants

  8. Research on industrial development of radiation sterilization in Sichuan

    International Nuclear Information System (INIS)

    Chen Xun; Zhu Rong; Chen Jigang; Ouyang Qiongli

    2010-01-01

    Radiation sterilization is widely applied in food processing, pharmaceutical manufacturing and medical instrumentation producing. As this industry offers service to related corporations, its development depends largely on the market scale of the relevant industries. This article mainly discusses the balance point between the capacity of radiation sterilization and the requirement of its market. There are less than 1% of the companies in Sichuan which using radiation sterilization for its products, broad prospects has shown in this field. There are 3 key points to make its output value reach 0.1% of the GDP in Sichuan: 1. Breaking the restrictions of capacity and inappropriate resources distribution. 2. Promoting the technique of radiation sterilization, guiding corporation to reduce their dependence on food additive from the perspective of food safety, make effective implantation of radiation sterilization into their manufacture processes. 3. Increasing publicity, eliminating scared mentality among customer on nuclear technology, helping manufacturing corporations to establish green environmental protection brand, directing our customer to a more healthy awareness. (authors)

  9. Industrial Hygiene Group annual research report, FY 1981

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, J.O.; Ettinger, H.J. (comps.)

    1982-10-01

    Field studies have been performed at several oil shale facilities to identify unique industrial hygiene problems and provide input to inhalation toxicology studies aimed at evaluating the hazards of materials associated with this developing technology. Aerosol physics support has also been provided to develop aerosol generation and animal exposure techniques for evaluating the toxicity of oil shale materials and manmade mineral fibers. As part of the effort to assure a safe, orderly, and timely development of various synfuels, field evaluation of indicator-sampling procedures was perfomed, and industrial hygiene work practices for two synfuel technologies are being prepared. Respirator studies are used to evaluate the performances of special devices (some of which are not in the existing government approval schedules) and of a proposed test procedures for self-contained breathing apparatus. An approval procedure is being developed for air-purifying respirators required for protection against radioiodine, evaluating the adequacy of respirator programs at the Nuclear Regulatory Commission licensee facilities, and developing a program for respirator use under emergency situations. A new aerosol size-characterization stack sampler has been designed, and potential instrument changes to aerosol size monitoring for filter testing are being evaluated. Material permeability tests have identified the protection afforded by protective clothing materials, and improved analytical procedures have been developed for pentachlorophenol and plutonium.

  10. Industry

    International Nuclear Information System (INIS)

    Schindler, I.; Wiesenberger, H.

    2001-01-01

    This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

  11. The role of leadership in bridging the cultural divide within university-industry cooperative research centres

    DEFF Research Database (Denmark)

    Mahdad, Maral; Bogers, Marcel; Piccaluga, Andrea

    The purpose of this study is to understand the role of leadership in bridging the cultural gap within university-industry cooperative research centres. Many different aspects of university-industry collaborations have been researched, but the role of leadership in such organizations has not been...... and employees representatives from both the company and the university within eight joint laboratories of Telecom Italia. We find that leadership theories help to shed light on the performance of university-industry collaboration. We specifically identify charismatic leadership at the individual level followed...... provide specific insights that advance the literature in management of university-industry collaborations as well as leadership theories....

  12. Jobs and Skills in Industry 4.0: An Exploratory Research

    OpenAIRE

    Pinzone , Marta; Fantini , Paola; Perini , Stefano; Garavaglia , Stefano; Taisch , Marco; Miragliotta , Giovanni

    2017-01-01

    Part 5: Sustainable Human Integration in Cyber-Physical Systems: The Operator 4.0; International audience; Industry 4.0 is at the center of the current debate among manufacturing leaders, industrial practitioners, policy makers and researchers. Despite the increasing attention paid to changes in jobs and skills generated by Industry 4.0, research in this domain is still scarce. Our study focuses on the evolution of technical skills in the context of Industry 4.0 and it provides qualitative in...

  13. Impact of design research on industrial practice tools, technology, and training

    CERN Document Server

    Lindemann, Udo

    2016-01-01

    Showcasing exemplars of how various aspects of design research were successfully transitioned into and influenced, design practice, this book features chapters written by eminent international researchers and practitioners from industry on the Impact of Design Research on Industrial Practice. Chapters written by internationally acclaimed researchers of design analyse the findings (guidelines, methods and tools), technologies/products and educational approaches that have been transferred as tools, technologies and people to transform industrial practice of engineering design, whilst the chapters that are written by industrial practitioners describe their experience of how various tools, technologies and training impacted design practice. The main benefit of this book, for educators, researchers and practitioners in (engineering) design, will be access to a comprehensive coverage of case studies of successful transfer of outcomes of design research into practice; as well as guidelines and platforms for successf...

  14. Energy Saving Separations Technologies for the Petroleum Industry: An Industry-University-National Laboratory Research Partnership

    Energy Technology Data Exchange (ETDEWEB)

    Dorgan, John R.; Stewart, Frederick F.; Way, J. Douglas

    2003-03-28

    This project works to develop technologies capable of replacing traditional energy-intensive distillations so that a 20% improvement in energy efficiency can be realized. Consistent with the DOE sponsored report, Technology Roadmap for the Petroleum Industry, the approach undertaken is to develop and implement entirely new technology to replace existing energy intensive practices. The project directly addresses the top priority issue of developing membranes for hydrocarbon separations. The project is organized to rapidly and effectively advance the state-of-the-art in membranes for hydrocarbon separations. The project team includes ChevronTexaco and BP, major industrial petroleum refiners, who will lead the effort by providing matching resources and real world management perspective. Academic expertise in separation sciences and polymer materials found in the Chemical Engineering and Petroleum Refining Department of the Colorado School of Mines is used to invent, develop, and test new membrane materials. Additional expertise and special facilities available at the Idaho National Engineering and Environmental Laboratory (INEEL) are also exploited in order to effectively meet the goals of the project. The proposed project is truly unique in terms of the strength of the team it brings to bear on the development and commercialization of the proposed technologies.

  15. RESEARCH ON COMPLEX, LARGE INDUSTRIAL PROJECTS IN TRANSNATIONAL ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Florin POPESCU

    2016-12-01

    Full Text Available More and more projects from different industrial sectors developed in transnational environment are becoming more characterized as "complex". In recent years, there has been much discussion and controversy about the complexity of the projects, and, despite what has been written and said in various papers, journals and professional conferences, more confusion than clarification was created, complexity of projects being interpreted differently from one author to another. Most of the literature studied is based on linear, analytical and rational approach, focusing on the size of project management planning and control and actually less on projects that are characterized as taking place and grow into a dynamic socio-human environment in a continuous change. This study represents a critical review of existing theoretical models found in literature, highlighting their limitations. The output of this literature study represents an integration of different approaches concerning complexity under one umbrella to provide a common understanding of the evolution of this concept.

  16. 7 CFR 1220.230 - Promotion, research, consumer information, and industry information.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Promotion, research, consumer information, and...), DEPARTMENT OF AGRICULTURE SOYBEAN PROMOTION, RESEARCH, AND CONSUMER INFORMATION Soybean Promotion and Research Order Expenses and Assessments § 1220.230 Promotion, research, consumer information, and industry...

  17. Is performance related to marketing research in the health care industry?

    Science.gov (United States)

    Naidu, G M; Kleimenhagen, A; Pillari, G D

    1994-01-01

    Marketing research has grown to become indispensable for superior performance in packaged goods industries. While health care institutions are spending large amounts on marketing research, few studies focus upon the relationship of marketing research to health care organizational performance. Utilizing a national sample of U.S. hospitals, this article points out that marketing research and superior performance are positively associated.

  18. Market research of window units and doors industry in Russia

    OpenAIRE

    Grishankova, Elena

    2010-01-01

    The purpose of this research is to analyze macro-environmental and competitive forces in the Russian market and to determine possible entry modes for a new company. Some practical information on legal issues and regulatory organizations is also included in the paper in order to create a comprehensive overview of any potentially influential factors. The conceptual framework is based on the macro-environmental market research approach, Michael Porter’s five forces framework and internationa...

  19. Human factors research in Central Research Institute of Electric Power Industry creation of safety culture

    International Nuclear Information System (INIS)

    Horie, Yasuo

    2002-01-01

    To prevent accident of nuclear power plant, Human Factors Center was built in the Central Research Institute of Electric Power Industry in July 1987. It developed an evaluation method of human error cases and an application method of human factors information. Now it continues analysis and application of human factors information, development of training/work support tools and research/experiment of human behavior. Japan-Human Performance Evaluation System (J-HPES) was developed as an analytical system for analysis and evaluation of human factors related to the trouble and for using the result as the common property by storage the analytical results. J-HPES has a standard procedure consisted of collecting and analyzing data and proposing the countermeasures. The analytical results are arranged by 4 kinds of charts by putting into the form of a diagram. Moreover, it tries to find the causes with indirect and potential causes. Two kinds of materials, Caution Report and Human Factors Precept by means of Illustrations, are published. People can gain access to HFC database by URL http://criepi.denken.or.jp/CRIEPI/HFC/DB. To prevent these accidents, creation of human factors culture has been required. Five kinds of teaching materials and the training method are developed. (S.Y.)

  20. Industry, university and government partnership to address research, education and human resource challenges for nuclear industry in Canada

    International Nuclear Information System (INIS)

    Mathur, R.M.

    2004-01-01

    Full text: This paper describes the outcome of an important recent initiative of Canadian nuclear industry to reinvigorate interest in education and collaborative research in prominent Canadian universities. This initiative has led to the formation of the University Network of Excellence in Nuclear Engineering (UNENE), incorporated in 2002. During the recent past, the slowdown in nuclear power development in Canada has curtailed the demand for new nuclear professionals down to a trickle. Without exciting job opportunities in sight the interest of prospective students in nuclear education and research has plunged. Consequently, with declining enrolment in nuclear studies and higher demand from competing disciplines, most universities have found it difficult to sustain nuclear programs. As such the available pool of graduating students is small and insufficient to meet emerging industry demand. With nuclear industry employees' average age hovering around mid-forties and practically no younger cohort to back up, nuclear industry faces the risk of knowledge loss and significant difficulty in recruiting new employees to replenish its depleting workforce. It is, therefore, justifiably concerned. Also, since nuclear generation is now the purview of smaller companies, their in-house capability for mid- to longer-term research is becoming inadequate. Recognizing the above challenges, Ontario Power Generation, Bruce Power and Atomic Energy of Canada Limited have formed an alliance with prominent Canadian universities and undertaken to invest money and offer in-kind support to accomplish three main objectives: Reinvigorate university-based nuclear engineering research by augmenting university resources by creating new industry supported research professorships and supporting research of other professors; Promote enrolment in graduate programs by supporting students and making use of a course-based Master of Engineering (M.Eng.) Program that is taught collectively by

  1. Aeronautics Education, Research, and Industry Alliance (AERIAL) Year 2 Report and Year 3 Proposal

    Science.gov (United States)

    Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, Geroge; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; Tarry, Scott E.; Vlasek, Karisa D.

    2003-01-01

    The Aeronautics Education, Research, and Industry Alliance (AERIAL): a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, contributes to the strategic research and technology priorities of NASA while intensifying Nebraska s rapidly growing aeronautics research and development endeavors. AERIAL enables Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. This report contains a summary of AERIAL's activities and accomplishments during the second year of implementation. The AERIAL Year 3 proposal is also included.

  2. Assessment of industry needs for oil shale research and development. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hackworth, J.H.

    1987-05-01

    Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry`s view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R&D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

  3. Research and Development Financing in the Renewable Energy Industry in Brazil

    Directory of Open Access Journals (Sweden)

    Muriel de Oliveira Gavira

    2014-09-01

    Full Text Available In the last decades, the Brazilian government has put many public policies in place in order to create a favourable environment to promote energy efficiency and clean energy. In this paper we discuss the use of research and development financing support by the clean energy industry in Brazil. To do so, we carried out an empirical research analysing secondary data from legislation, literature case studies, and public and industry reports in order to determine if the companies of the clean energy industry have public financial support to research and development. Our ongoing research shows that, despite incentives to stimulate the dissemination of clean energy, the participation of some of the clean energy is very small (especially solar. We believe that the contributions of this study will assist policy makers, and the whole industry, to improve clean energy research and development investments in Brazil.

  4. Geographical Research Model of the Relation Between Tourism and Industry on the Framework of Pula

    Directory of Open Access Journals (Sweden)

    Nikola Vojnović

    2002-01-01

    Full Text Available The research gives a proposal of a theoretical research model, and can be the basis of geographical research of the relation between tourism and industry as two opposite human activities and branches of economy. The accent is set on the consideration of their relation in major urban areas, which show a parallel development of tourism and industry of the Second Industrial Revolution, typical for Croatian coastline region. The proposal of the research scheme, from the analysis of the present structure and the quantity, harmony and disharmony of both branches, to the possibility of creating an industrial-tourism region are analyzed in the first part of the work, whereas the results of the initial research are presented in the second part.

  5. Research on the mechanical characteristic of the bentonite mixture material under the groundwater environment of Horonobe. 2

    International Nuclear Information System (INIS)

    Takaji, Kazuhiko; Shigeno, Yoshimasa; Simogouchi, Takafumi

    2005-02-01

    In the Horonobe underground research project, various in-situ experiments are conducted in order to confirm the applicability of the Engineered Barrier System (EBS) design techniques shown in H12 report, to understand the long-term effects of EBS, and to improve the reliability of the prediction method. Moreover, since it is assumed that the circumference of Horonobe underground research laboratory is the saline water environment, to understand the mechanical behavior of the bentonite mixture material under the saline water environment is important when influenced in design of in-situ experiments. In this study, unconfined compression tests, consolidated-undrained triaxial compression tests and long-term consolidation tests of the bentonite mixture material were performed using groundwater that is extracted near the Horonobe underground research laboratory, and simulation analyses of EBS over a period of time using the results of laboratory experiments etc. were carried out. Consequently, although compressive strength and the elastic modulus under the saline water environment declined compared with that the fresh water, neither shear deformation behavior under triaxial stress condition nor volume deformation behavior by consolidation test almost had a difference, and it was suggested that there were few possibilities that the saline water had serious influence mechanically also about long-term mechanical behavior. (author)

  6. Applied Operations Research: Augmented Reality in an Industrial Environment

    Science.gov (United States)

    Cole, Stuart K.

    2015-01-01

    Augmented reality is the application of computer generated data or graphics onto a real world view. Its use provides the operator additional information or a heightened situational awareness. While advancements have been made in automation and diagnostics of high value critical equipment to improve readiness, reliability and maintenance, the need for assisting and support to Operations and Maintenance staff persists. AR can improve the human machine interface where computer capabilities maximize the human experience and analysis capabilities. NASA operates multiple facilities with complex ground based HVCE in support of national aerodynamics and space exploration, and the need exists to improve operational support and close a gap related to capability sustainment where key and experienced staff consistently rotate work assignments and reach their expiration of term of service. The initiation of an AR capability to augment and improve human abilities and training experience in the industrial environment requires planning and establishment of a goal and objectives for the systems and specific applications. This paper explored use of AR in support of Operation staff in real time operation of HVCE and its maintenance. The results identified include identification of specific goal and objectives, challenges related to availability and computer system infrastructure.

  7. Research of UHPC properties prepared with industrial mixer

    Science.gov (United States)

    Šerelis, E.; Vaitkevičius, V.; Kerševičius, V.

    2017-09-01

    Ultra-high performance concrete (UHPC) mixture with advanced mechanical and durability properties was created using decent Zyklos ZZ50HE mixer. Zyklos ZZ50HE rotating pan mixer is similar to mixer which has common concrete plants. In experiment UHPC was prepared with Zyklos ZZ50HE mixer and thereafter best composition was selected and prepared with industrial HPGM 1125 mixer. Experiment results revealed that UHPC with W/C=0.29 and advanced mechanical and durability properties can be prepared. In experiment tremendous amount of micro steel fibres (up to 147 kg/m3) were incorporated in UHPC. Concrete with excellent salt scaling resistance and great mechanical properties was obtained. Compressive strength was increased about 30 % from 116 MPa to 150 MPa and flexural strength was increased about 5 times from 6.7 to 36.2 MPa. Salt-scaling resistance at 40 cycles in 3 % NaCl solution varied from 0.006 kg/m2 to 0.197 kg/m2. There were a few attempts to create UHPC and UHPFRC with decent technology, however, unsuccessfully till now. In the world practice this new material is currently used in the construction of bridges and viaducts.

  8. Groundwater Capture Zones

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — Source water protection areas are delineated for each groundwater-based public water supply system using available geologic and hydrogeologic information to...

  9. Basic to industrial research on neutron platform in Japan

    Indian Academy of Sciences (India)

    Building on these successes, a new spallation neutron source (KENS) was con- structed at KEK (the present High Energy Accelerator Research Organization) in. 618. Pramana – J. Phys., Vol. 71, No. ... Ministry of Education, Science and Culture (MONBUSHO) planned the Hadron. Project consisting of four major facilities ...

  10. Technology transfer from research and development to European industry

    International Nuclear Information System (INIS)

    Conrads, H.; Theenhaus, R.

    1989-01-01

    This paper gives an overview of technology transfer, i.e. the transfer of knowledge, insights and technologies from research and development to practical application, especially in the Federal Republic of Germany. Some examples and perspectives of technology transfer for nuclear fusion are given. (author). 7 refs.; 5 figs

  11. Proceedings of the Conference on Industry and Day Care (Urban Research Corporation, Chicago, 1970).

    Science.gov (United States)

    Urban Research Corp., Chicago, IL.

    This booklet of conference proceedings reflects the efforts of the Urban Research Corporation to continue conversation between industry and day care specialists. A group of 175 industry representatives, early childhood specialists, community agency representatives, and day care operators and franchisers convened to discuss their mutual concerns.…

  12. North Dakota Senior High Industrial Arts Program of Studies--Level II. Research Series No. 80.

    Science.gov (United States)

    North Dakota State Board for Vocational Education, Bismarck. Research Coordinating Unit.

    This industrial arts program of a studies guide is the product of a research project designed to (1) ascertain programs and curricula trends of senior high school industrial arts in the fifty states, (2) develop a philosophical rationale for senior high schools in North Dakota secondary schools, and (3) develop a master plan and program of study…

  13. Responsible Research and Innovation in industry-challenges, insights and perspectives

    NARCIS (Netherlands)

    Martinuzzi, André; Blok, Vincent; Brem, Alexander; Stahl, Bernd; Schönherr, Norma

    2018-01-01

    The responsibility of industry towards society and the environment is a much discussed topic, both in academia and in business. Responsible Research and Innovation (RRI) has recently emerged as a new concept with the potential to advance this discourse in light of two major challenges industry is

  14. 48 CFR 206.302-3 - Industrial mobilization; or engineering, development, or research capability.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Industrial mobilization; or engineering, development, or research capability. 206.302-3 Section 206.302-3 Federal Acquisition... COMPETITION REQUIREMENTS Other Than Full and Open Competition 206.302-3 Industrial mobilization; or...

  15. Competitive Research Grants and Industry Collaboration: A Challenge for Universities in the 1990s.

    Science.gov (United States)

    Johnson, Peter

    1993-01-01

    The reasons for increased collaboration between Australian universities and industry are examined, focusing on competitive research grant programs developed by the government in the last decade. University and industry response to these opportunities and to issues such as intellectual property rights and publication rights are discussed. (MSE)

  16. Mapping groundwater quality in the Netherlands

    NARCIS (Netherlands)

    Pebesma, Edzer Jan

    1996-01-01

    Groundwater quality is the suitability of groundwater for a certain purpose (e.g. for human consumption), and is mostly determined by its chemical composition. Pollution from agricultural and industrial origin threatens the groundwater quality in the Netherlands. Locally, this pollution is

  17. 1998 researchers' conference proceedings, Amarillo College Business and Industry Center

    International Nuclear Information System (INIS)

    1998-01-01

    The first Strategic Arms Reduction Treaties (START 1 and 2) signed by the US and the Soviet Union call for a reduction in strategic nuclear warheads to about one-third of 1990 levels and a complete elimination of land-based, multiple-warhead missiles. As a consequence of dismantling nuclear warheads, a significant portion of the inventory of nuclear materials that were formerly parts of deployed weapon systems was designated to be handled and/or stored at the Pantex Plant near Amarillo, Texas. To facilitate research integration between the national laboratories and the universities, the Center has divided its technical activities into seven focus areas. For Nuclear and Other Materials Studies, the focus areas are Materials Science, Plutonium Processing and handling, Nuclear Materials Storage, and analytical Development. The Environment, Safety and Health focus areas are Environmental Restoration and Protection, Safety and Health, and Waste Management. Research projects within each area are presented

  18. FSSC 22000 Packaging Implementation: a Plastics Industry Research

    OpenAIRE

    Cantanhede, Vanessa; Pereira, Karen Signori; Barreto, Daniel Weingart

    2018-01-01

    Abstract This paper presents the outcomes of an exploratory research carried out in companies, which are located in Brazil. They are FSSC-22000-certified food plastic packaging manufacturers. In order to identify the key aspects of the implementation process and certification, a questionnaire was developed and sent to twenty certified organizations. Out of them, eleven of which participating companies responded in a collaborative way. Based on the data obtained, improving competitiveness and...

  19. Industrialization

    African Journals Online (AJOL)

    Lucy

    . African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

  20. Industrialization

    African Journals Online (AJOL)

    Lucy

    scholar, Walt W. Rostow presented and supported this line of thought in his analysis of ... A Brief Historical Background of Industrialization in Africa ... indicative) The western model allowed for the political economy to be shaped by market.

  1. Determination of effective university-industry joint research for photovoltaic technology transfer (UIJRPTT) in Thailand

    International Nuclear Information System (INIS)

    Sugandhavanija, Pornpimol; Sukchai, Sukruedee; Ketjoy, Nipon; Klongboonjit, Sakol

    2011-01-01

    Most of the literatures related to university-industry (U-I) and technology transfer assume that the collaboration particularly the U-I joint research is beneficial to both university and industry which as a result underpins the sustainable development of economics and living standards of developed and developing countries. The U-I joint research for photovoltaic technology transfer in a developing country like Thailand should have been increased considering the fact that (i) the government implemented various strategies to support the renewable energy research and market development, (ii) the university aimed to be ''research-based university and (iii) the Thai photovoltaic industry struggle for competitiveness and survival in the global market. However, evidence revealed that the university and industry conducted little number of U-I joint projects. In this paper, we investigate the factors influencing the effective U-I joint research for photovoltaic technology transfer (UIJRPTT). In an attempt to better understand the influence of the factors, the path model with factors related to characteristics and perspectives of the university and the industry as well as joint research mechanism and their linkages to higher growth and improved economic and quality performance of the U-I joint research is developed and validated. The developed model empirically explains interaction between the factors and the outcome factors and can assist the government, the university and the industry to devise target strategies to improve the growth and performance of UIJRPTT. (author)

  2. Research and industrial application of x-ray photoelectron spectroscopy (XPS) in Malaysia

    International Nuclear Information System (INIS)

    Mohd Ambar Yarmo; Abd Razak Daud; Abdul Kariem Arof

    2000-01-01

    As a developing country, Malaysia is fully committed to research and development especially for industrial development. One of priority fields is advanced materials and surface analysis of such materials is an important aspect in research. Among the tools for surface science analysis is x-ray photoelectron spectroscopy (XPS) which can be considered new to this country. The industrial sector is also keen to solve their problems and developing their products using XPS. The microelectronic and electrical industries are interested in solving problems related to metal-metal joining , gold silica peeling, surface corrosion and surface coating. The glove industry uses XPS to solve problems due to staining and color fading of their products. Research conducted in universities and research institutes that mainly deal with catalysis, membranes for fuel cells, sensors, batteries, corrosion phenomena and interface interaction in coating finds XPS a useful technique for surface studies. Specific examples from various sectors will be presented in this paper. (Author)

  3. 77 FR 36606 - Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public Meeting

    Science.gov (United States)

    2012-06-19

    ...: Threat Prevention --Working Group 2: Leak Detection/Mitigation & Storage --Working Group 3: Anomaly... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID PHMSA-2012-0146] Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public...

  4. Advances in research and development of mango industry

    Directory of Open Access Journals (Sweden)

    Ian S. E. Bally

    2011-10-01

    Full Text Available World mango production is spread over 100 countries that produce over 34.3 million tons of fruit annually. Eighty percent of this production is based in the top nine producing nations that also consume upward of 90% of their production domestically. One to 2 percent of fruit is traded internationally in to markets in the European Community, USA, Arabian Peninsula and Asia. This paper outlines some of the recent research and development advances in mango breeding and genomics, rootstock development, disease management and harvest technologies that are influencing the production and quality of mango fruit traded domestically and internationally.

  5. Methods to evaluate fish freshness in research and industry

    DEFF Research Database (Denmark)

    Olafsdottir, G.; Martinsdóttir, E.; Oehlenschläger, J.

    1997-01-01

    Current work in a European concerted action project 'Evaluation of Fish Freshness' (AIR3 CT94-2283) focuses on harmonizing research activities in the area of fish freshness evaluation in leading fish laboratories in Europe (see Box 1). The overall aim of the concerted action project is to validat...... measurements with respect to fish freshness evaluation. In this article, the different subgroups have summarized changes that occur in fish and methods to evaluate fish freshness as a first step towards the definition of criteria for fish freshness...

  6. Thermal-hydraulic-geochemical coupled processes around disposed high level nuclear waste in deep granite hosted geological repositories: frontier areas of advanced groundwater research in India

    International Nuclear Information System (INIS)

    Bajpai, R.K.

    2012-01-01

    Indian policy for permanent disposal of high level nuclear wastes with radionuclide having very long half lives include their immobilization in a stable matrix i.e. glasses of suitable composition, its storage in high integrity steel canisters and subsequent disposal in suitable host rock like granites at a depth of 400-500m in stable geological set up. The site for such disposal facilities are selected after vigorous assessment of their stability implying an exhaustive site selection methodology based on a large number of criteria and attributes. In India, an area of about 70000 square kilometers occupied by granites has been subjected to such evaluation for generating comprehensive database on host rock parameters. The sites selected after such intensive analysis are expected to remain immune to processes like seismicity, volcanism, faulting, uplift, erosion, flooding etc. even in distant future spanning over tens of thousands of years. Nevertheless, groundwater has emerged as the only credible pathway through which disposed waste can eventually find its way to accessible biosphere. Hence groundwater research constitutes one of the most important aspects in demonstration of safety of such disposal. The disposed waste due to continuous emission of decay heat creates high temperature field around them with resultant increase in groundwater temperature in the vicinity. Hot groundwater on reacting with steel canisters, backfill clays and cement used around the disposed canister, produces geochemical environment characterized by altered Ph, Eh and groundwater compositions. Acceleration in geochemical interaction among waste-groundwater-clay-cement-granite often results in dissolution or precipitation reactions along the groundwater flow paths i.e. fractures with resultant increase or decrease in their permeability. Thus thermal, hydraulic and geochemical processes work interdependently around the disposed waste. These coupled processes also control the release and

  7. The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report. UNO Aviation Monograph Series. UNOAI Report.

    Science.gov (United States)

    Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, George; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; O'Neil, Patrick D.; Tarry, Scott E.; Vlasek, Karisa D.

    This document contains four papers on aeronautics education, research, and partnerships that partly supported through the Aeronautics Education, Research, and Industry Alliance (AERIAL). The paper "2002 AERIAL Monograph" (Brent D. Bowen, Jocelyn S. Nickerson, Mary M. Fink, et al.) presents an overview of research and development in the…

  8. Isotope based assessment of groundwater renewal in water scarce regions. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2001-10-01

    The isotopic composition and chemical constituents of water infiltrating through the soil zone (unsaturated zone, or zone of aeration) into groundwater can be employed to determine the moisture transport in the unsaturated zone, thus enabling estimation of the water infiltration rate to the underlying aquifer. This was the basis on which this CRP was initiated in 1996. The overall results obtained from three years of applied field research related to study of moisture transport dynamics and estimation of natural recharge through use of isotope/hydrochemical depth profiles of the soil moisture in the unsaturated zone were presented and discussed at the final Research Co-ordination Meeting held in Vienna from 18 to 21 October 1999. A total of 44 sites were involved in the project on which detailed information on physiography, lithology, rainfall, unsaturated moisture content and a variety of chemical and isotopic determinants is now available. This publication contains 11 individual reports presented by CRP participants at the Meeting. Each of the reports have been indexed separately

  9. Resilience in the Romanian Food Industry. Preliminary Research

    Directory of Open Access Journals (Sweden)

    Silvius STANCIU

    2015-12-01

    Full Text Available Critical situations occurring in the food chain represent a cause for concern for companies, consumers and government authorities. Food product supply continuity assurance is supported by economic considerations coming from producers or food product merchants, by the increasing demand that exists on the market or by the political implications regarding food security assurance among the population. The study focuses on assessing the extent to which the food sector economic agents are prepared to face potential critical situations in the unfolding of their business activities. In Romania there haven’t been carried out any studies regarding food chain resilience regarding critical incidents and the economic impact of these incidents on the food sector. The main objective of the research was the Romanian food chain resilience assessment to critical situations, having a highly applicative character. It was based on questionnaires given to a representative sample of companies and it highlighted the food companies’ resilience to critical situations. The responding economic agents were mainly from the agro-food production, food distribution, food production and distribution, and other related domains. The research regarding food chain resilience to critical situations in Romania showed a primary character of the concept; therefore, this sector must be developed both at a strategic and operational level.

  10. Alcohol research and the alcoholic beverage industry: issues, concerns and conflicts of interest.

    Science.gov (United States)

    Babor, Thomas F

    2009-02-01

    Using terms of justification such as 'corporate social responsibility' and 'partnerships with the public health community', the alcoholic beverage industry (mainly large producers, trade associations and 'social aspects' organizations) funds a variety of scientific activities that involve or overlap with the work of independent scientists. The aim of this paper is to evaluate the ethical, professional and scientific challenges that have emerged from industry involvement in alcohol science. Source material came from an extensive review of organizational websites, newspaper articles, journal papers, letters to the editor, editorials, books, book chapters and unpublished documents. Industry involvement in alcohol science was identified in seven areas: (i) sponsorship of research funding organizations; (ii) direct financing of university-based scientists and centers; (iii) studies conducted through contract research organizations; (iv) research conducted by trade organizations and social aspects/public relations organizations; (v) efforts to influence public perceptions of research, research findings and alcohol policies; (vi) publication of scientific documents and support of scientific journals; and (vii) sponsorship of scientific conferences and presentations at conferences. While industry involvement in research activities is increasing, it constitutes currently a rather small direct investment in scientific research, one that is unlikely to contribute to alcohol science, lead to scientific breakthroughs or reduce the burden of alcohol-related illness. At best, the scientific activities funded by the alcoholic beverage industry provide financial support and small consulting fees for basic and behavioral scientists engaged in alcohol research; at worst, the industry's scientific activities confuse public discussion of health issues and policy options, raise questions about the objectivity of industry-supported alcohol scientists and provide industry with a

  11. Research on the path of synergetic development between logistics industry and the leading industry in Fujian province

    Directory of Open Access Journals (Sweden)

    Mei Qiaoping

    2017-01-01

    Full Text Available Logistics industry is closely related to other industry, the synergetic development between logistics industry and leading industry is benefit for leading industry to reduce costs, improve efficiency and promote industrial upgrading. This book analyzes the association of logistics industry and leading industry on the basis of the input-output tables of Fujian and proposes advises to promote their synergetic development based on the calculation.

  12. Research Project on CO2 Geological Storage and Groundwater Resources: Water Quality Effects Caused by CO2 Intrusion into Shallow Groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Birkholzer, Jens; Apps, John; Zheng, Liange; Zhang, Yingqi; Xu, Tianfu; Tsang, Chin-Fu

    2008-10-01

    One promising approach to reduce greenhouse gas emissions is injecting CO{sub 2} into suitable geologic formations, typically depleted oil/gas reservoirs or saline formations at depth larger than 800 m. Proper site selection and management of CO{sub 2} storage projects will ensure that the risks to human health and the environment are low. However, a risk remains that CO{sub 2} could migrate from a deep storage formation, e.g. via local high-permeability pathways such as permeable faults or degraded wells, and arrive in shallow groundwater resources. The ingress of CO{sub 2} is by itself not typically a concern to the water quality of an underground source of drinking water (USDW), but it will change the geochemical conditions in the aquifer and will cause secondary effects mainly induced by changes in pH, in particular the mobilization of hazardous inorganic constituents present in the aquifer minerals. Identification and assessment of these potential effects is necessary to analyze risks associated with geologic sequestration of CO{sub 2}. This report describes a systematic evaluation of the possible water quality changes in response to CO{sub 2} intrusion into aquifers currently used as sources of potable water in the United States. Our goal was to develop a general understanding of the potential vulnerability of United States potable groundwater resources in the event of CO{sub 2} leakage. This goal was achieved in two main tasks, the first to develop a comprehensive geochemical model representing typical conditions in many freshwater aquifers (Section 3), the second to conduct a systematic reactive-transport modeling study to quantify the effect of CO{sub 2} intrusion into shallow aquifers (Section 4). Via reactive-transport modeling, the amount of hazardous constituents potentially mobilized by the ingress of CO{sub 2} was determined, the fate and migration of these constituents in the groundwater was predicted, and the likelihood that drinking water

  13. FSSC 22000 Packaging Implementation: a Plastics Industry Research

    Directory of Open Access Journals (Sweden)

    Vanessa Cantanhede

    2018-03-01

    Full Text Available Abstract This paper presents the outcomes of an exploratory research carried out in companies, which are located in Brazil. They are FSSC-22000-certified food plastic packaging manufacturers. In order to identify the key aspects of the implementation process and certification, a questionnaire was developed and sent to twenty certified organizations. Out of them, eleven of which participating companies responded in a collaborative way. Based on the data obtained, improving competitiveness and customer retention were the reasons, which led the companies to seek the certification. However, the greatest difficulties were related to personnel, which presented technical and behavioral issues. In addition, it was noted that an overall satisfaction, derived from after-certification benefits, has been arisen in the companies. For instance, enhanced employee awareness, improved company's image and winning new customers, significantly contributing to their competitiveness, are some of the benefits found in this process.

  14. Advancing Understanding on Industrial Relations in Multinational Companies: Key Research Challenges and the INTREPID Contribution

    DEFF Research Database (Denmark)

    Gunnigle, Patrick; Valeria, Pulignano; Edwards, Tony

    2015-01-01

    companies using INTREPID (Investigation of Transnationals’ Employment Practices: an International Database) data. Finally, the paper identifies some of the main industrial relations issues that remain to be addressed, in effect charting a form of research agenda for future work using the INTREPID data......This paper has three principal aims. It firstly provides some theoretical background on the key current research issues and challenges in regard to industrial relations in multinational companies. It then presents a concise review of scholarship to date on industrial relations in multinational...

  15. Ties that bind: multiple relationships between clinical researchers and the pharmaceutical industry.

    Science.gov (United States)

    Henry, David; Doran, Evan; Kerridge, Ian; Hill, Suzanne; McNeill, Paul M; Day, Richard

    2005-11-28

    It is believed that pharmaceutical industry sponsorship of clinical research leads to the development of multiple ties between clinicians and the pharmaceutical industry. To quantify this relationship we conducted a survey of medical specialists listed in the Medical Directory of Australia in 2002 and 2003. A questionnaire was mailed that elicited information about all aspects of research relationships between clinicians and pharmaceutical companies. The odds of reporting multiple additional ties (financial and professional) with pharmaceutical companies by clinicians who had an active research relationship were compared with those who did not. All clinicians who returned a completed questionnaire about their research activities were included in the study. A questionnaire was mailed to 2120 medical specialists; 823 (39%) responded. Of these, 338 (41%) reported involvement in industry-sponsored research in the previous year. They were more likely than others to have been offered industry-sponsored items or activities valued at more than 500 AU dollars (>382 US dollars; odds ratio [OR], 3.5; 95% confidence interval [CI], 2.6-4.7) and support for attending international conferences (OR, 5.4; 95% CI, 3.9-7.4). The strongest associations were seen for acting as a paid consultant to industry (OR, 9.0; 95% CI, 3.9-20.4) and for membership on advisory boards (OR, 6.9; 95% CI, 5.1-9.6). There was a strong relationship between research collaboration and accumulation of industry ties. For 1 additional tie the OR was 2.2 (95% CI, 1.2-3.8) and rose to 6.3 (95% CI, 3.5-11.1) with 3 ties and 41.8 (95% CI, 14.5-143.4) with 6 or more ties. Medical specialists who have research relationships with the pharmaceutical industry are much more likely to have multiple additional ties than those who do not have research relationships. Institutional review should discourage clinical researchers from developing multiple ties.

  16. Hexavalent Chromium: Analysis of the Mechanism of Groundwater Contamination in a Former Industrial Site in the Province of Vicenza (Northern Italy

    Directory of Open Access Journals (Sweden)

    Valentina Accoto

    2017-01-01

    Full Text Available The study consisted in the analysis of the mobilization mechanisms of hexavalent chromium (Cr(VI into groundwater from a decommissioned contaminated factory. The site is located in the Province of Vicenza and formerly was a chrome-plating plant. The subsoil consists predominantly of gravelly deposits with a thickness of at least one hundred meters. An unconfined aquifer is present with water table at about 23 m depth bgl. During the seven years of monitoring (2008-2014, the fluctuation of groundwater level was more than 6 m; hydraulic conductivity is about 1.0E-03 m/s and groundwater seepage velocity about 12 m/day. At the area of the source of contamination, the unsaturated soil is contaminated by hexavalent chromium throughout the thickness: concentrations range from 200 to 500 mg/kg. At the bottom of zone of groundwater level fluctuation, the hexavalent chromium concentration decreases to below the detection limit. The available data (e.g. hexavalent chromium concentrations in groundwater, groundwater level, local rainfall give the opportunity to assess the effects, on the magnitude of groundwater contamination, of the effective infiltration versus the fluctuation of groundwater level. The main analysis was performed on a statistical basis, in order to find out which of the two factors was most likely related to the periodic peaks of hexavalent chromium concentration in groundwater. Statistical analysis results were verified by a mass balance. Data show that at the site both the effective infiltration through the unsaturated zone and the leaching of soil contaminated by groundwater, when it exceeds a certain piezometric level, lead to peak concentrations of hexavalent chromium, even if with characteristics and effects different.

  17. From biomedical-engineering research to clinical application and industrialization

    Science.gov (United States)

    Taguchi, Tetsushi; Aoyagi, Takao

    2012-12-01

    The rising costs and aging of the population due to a low birth rate negatively affect the healthcare system in Japan. In 2011, the Council for Science and Technology Policy released the 4th Japan's Science and Technology Basic Policy Report from 2011 to 2015. This report includes two major innovations, 'Life Innovation' and 'Green Innovation', to promote economic growth. Biomedical engineering research is part of 'Life Innovation' and its outcomes are required to maintain people's mental and physical health. It has already resulted in numerous biomedical products, and new ones should be developed using nanotechnology-based concepts. The combination of accumulated knowledge and experience, and 'nanoarchitechtonics' will result in novel, well-designed functional biomaterials. This focus issue contains three reviews and 19 original papers on various biomedical topics, including biomaterials, drug-delivery systems, tissue engineering and diagnostics. We hope that it demonstrates the importance of collaboration among scientists, engineers and clinicians, and will contribute to the further development of biomedical engineering.

  18. Research joins forces with industry in the fight against cancer

    CERN Multimedia

    Francesco Poppi

    2010-01-01

    The Geneva-based Application of Detectors and Accelerators to Medicine (A.D.A.M. SA) has recently completed the first unit of an innovative linear accelerator for hadron therapy applications. The design of the new unit is based on pioneering studies carried out by the TERA Foundation a few years ago. Assembled at CERN in the framework of a partnership agreement with the company, this first module is now ready to leave Switzerland for Rome, where it will undergo some important performance tests.   The first unit of LIGHT was unveiled on 20 November. The ceremony was attended by Sergio Bertolucci, CERN Director for Research, Rolf Heuer, CERN Director-General, Alberto Colussi, Director of ADAM SA, President Carlo Lamprecht and Domenico Campi, ADAM SA Board Members, and Ugo Amaldi, President of the TERA Foundation. The Linac for Image-Guided Hadron Therapy (LIGHT) is the innovative linear accelerator designed by A.D.A.M. SA to revolutionise hadron therapy facilities by simplifying the infrastructure...

  19. Efficacy testing and market research for the pork industry

    Science.gov (United States)

    Sivinski, Jacek S.

    Low dose (less than 30 krad) gamma irradiation of Trichinella spiralis infected pork renders the parasites sexually sterile and blocks maturation of the ingested larvae in the host gut. Irradiation of freshly slaughtered, market weight hog carcasses indicate that larvae throughout the carcass have essentially identical sensitivities to radiation. The research data indicate that 30 krad of 0.66 MeV gammas can be delivered to market weight, split carcasses with acceptable uniformity, and that such a dose can provide a substantial margin of safety for human consumption of even heavily infected meat. Feasibility studies of pork irradiation in commercial operations have shown the process to be technically, economically, and financially feasible. Treatment during the first four years of operation in a 2,000 hog per day plant will cost about 0.0034 dollars per pound and 0.0011 dollars per pound thereafter. Social and political feasibility are addressed in a 1,000-family consumer survey completed in the first quarter of 1984.

  20. Efficacy testing and market research for the pork industry

    International Nuclear Information System (INIS)

    Sivinski, J.S.

    1985-01-01

    Low dose (less than 30 krad) gamma irradiation of Trichinella spiralis infected pork renders the parasites sexually sterile and blocks maturation of the ingested larvae in the host gut. Irradiation of freshly slaughtered, market weight hog carcasses indicate that larvae throughout the carcass have essentially identical sensitivities to radiation. The research data indicate that 30 krad of 0.66 MeV gammas can be delivered to market weight, split carcasses with acceptable uniformity, and that such a dose can provide a substantial margin of safety for human consumption of even heavily infected meat. Feasibility studies of pork irradiation in commercial operations have shown the process to be technically, economically, and financially feasible. Treatment during the first four years of operation in a 2,000 hog per day plant will cost about 0.0034 dollars per pound and 0.0011 dollars per pound thereafter. Social and political feasibility are addressed in a 1,000-family consumer survey completed in the first quarter of 1984. (author)

  1. Wind power - research and development. The wind turbine industry's view of the promotion of state-supported research and development

    International Nuclear Information System (INIS)

    Kroh, S.

    1995-10-01

    The windmill industry in Denmark is currently confronted with making a choice between competing technologies so that the role of the stimulus of state subsidies for research has lately increased in importance. The Ministry of Energy, it is claimed, must be aware of this as possibilities for making use of research results are dictated by the market and competition. The industry is not sympathetic to the idea of state research contracts with specified goals for which manufacturers must produce a technical solution. Consultancy firms should work towards solving general problems which could help the industry as a whole. Wind turbines which are cheap to produce and operate are of more interest to industry than those which are technologically advanced or of a lighter construction. It is not thought to be advantageous to concentrate the allocation of subsidies on one key project chosen by the Ministry itself, such as the current intense interest in turbine blades. Aerodynamics, noise pollution and materials are considered as more vital areas for research. A special interest in smaller windmills is not currently relevant. Evaluations of the quality of research projects demanding subsidies should be more critical. A detailed list of subjects within this field which are considered as being relevant for research is given. The Danish windmill industry advises a centralized wind power research institution and a gradual shift of the test station at Risoe National Laboratory to Jutland as wind conditions at Risoe are not considered satisfactory. A better communication between Risoe test station and the wind power industry is recommended. (AB)

  2. COLLABORATIVE RESEARCH: IN-SITU MITIGATION OF MERCURY CONTAMINATED GROUNDWATER IN KAZAKHSTAN

    Science.gov (United States)

    The U.S. Environmental Protection Agency (U.S. EPA) OIA receives funding from the U.S. State Department's Bio-Chem Redirect program to engage former Soviet biological and chemical weapons scientists in civilian research in environmental monitoring and remediation. Scientists in t...

  3. Industry interests in gambling research: Lessons learned from other forms of hazardous consumption.

    Science.gov (United States)

    Cowlishaw, S; Thomas, S L

    2018-03-01

    Research indicates that the evidential bases for many harm reduction policies targeting hazardous consumptions (including tobacco, alcohol and gambling) have been distorted by commercial industries that derive revenue from such commodities. These distortions are best illustrated by research on tobacco and alcohol, which indicates similar tactics used by industries to determine favourable policy environments through engineering of evidence, among other approaches. Although there is concern that gambling research is similarly vulnerable to commercial interests, the relevant literature lags far behind other fields and the aim of this paper is to increase familiarity with tactics used by industries for influencing research. It summarises the conceptual and empirical bases for expecting conflicts between goals of public health and companies that profit from hazardous consumptions. It also summarises evidence describing practices deployed by tobacco corporations, which include third-party techniques and the selective funding of research to manufacture doubt and deflect attention away from the consequences of smoking. It then reviews both early and emerging evidence indicating similar strategies used by alcohol industry, and uses this literature to view practices of the gambling industry. It argues that parallels regarding selective funding of research and third-party techniques provide grounds for strong concern about commercial influences on gambling research, and implementation of precautionary approaches to management of vested interests. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Basic research and industrialization of CANDU advanced fuel

    Energy Technology Data Exchange (ETDEWEB)

    Chun, Suk Ho; Park, Joo Hwan; Jun, Ji Su [and others

    2000-04-01

    handling, the preliminary evaluation of the CANFLEX-RU economics and some specification and description for the irradiation test of the CANFLEX-RU fuel NRU research reactor.

  5. Basic research and industrialization of CANDU advanced fuel

    International Nuclear Information System (INIS)

    Chun, Suk Ho; Park, Joo Hwan; Jun, Ji Su

    2000-04-01

    handling, the preliminary evaluation of the CANFLEX-RU economics and some specification and description for the irradiation test of the CANFLEX-RU fuel NRU research reactor

  6. An overview of industrial and organisational psychology research in South Africa: A preliminary study

    Directory of Open Access Journals (Sweden)

    Dries Schreuder

    2010-10-01

    Research purpose: The purpose of this study was to explore general research trends in the field of industrial and organisational psychology in South Africa from 1950 to 2008. Motivation for study: Research in the field tends to be influenced by either the changing needs of business or the occupational or personal fields of interest of academics, which often lead to an overemphasis on specific subdisciplines at the expense of others. This research aims to critically review dominant trends in the research focus areas in the field, in the light of present challenges in the changing work context. Recommendations are also made for possible future research. Research design, approach and method: A broad systematic review was carried out to analyse documented published and accredited South African research in the field (n = 2501. Main findings: Although there has been a proportional decline in personnel psychology research since 1990, there has been a proportional increase in both organisational psychology and employee wellness research since 1980 and 1990, respectively. Some areas of the industrial and organisational psychology field appear to be consistently under-researched. Practical implications: The insights derived from the findings can be used by academia and researchers in the field to plan future research initiatives. Contribution/value-add: The findings provide preliminary insights that contribute to the body of knowledge concerned with the industrial and organisational psychology field in the South African context.

  7. Application of isotopes to the assessment of pollutant behaviour in the unsaturated zone for groundwater protection. Final report of a coordinated research project 2004-2005

    International Nuclear Information System (INIS)

    2009-05-01

    A coordinated research project (CRP) was conducted by the IAEA with the purpose of studying what isotopic and other ancillary data are required to help understand migration of potential contaminants through the unsaturated zone (UZ) into the underlying groundwater. To this end, research projects were conducted in ten countries to study recharge and infiltration processes, as well as contaminant migration in a wide variety of UZ environments. This publication contains the reports of these ten projects and a summary of the accomplishments of the individual projects. The IAEA-TECDOC reviews the usefulness and current status of application of the combined use of isotope and other hydrogeochemical tools for the assessment of flow and transport processes in the UZ. A number of isotope and hydrochemical tools have been used to simultaneously study groundwater recharge and transport of pollutants in the UZ. This information is relevant for assessing the vulnerability of groundwater to contamination. The ten projects covered climates ranging from humid to arid, and water table depths from the near surface to over 600 m. The studies included measuring movement of water, solutes, and gases through the UZ using an assortment of isotope and geochemical tracers and approaches. Contaminant issues have been studied at most of the ten sites and the UZ was found to be very effective in protecting groundwater from most heavy metal contaminants. The publication is expected to be of interest to hydrologists, hydrogeologists and soil scientists dealing with pollution aspects and protection of groundwater resources, as well as counterparts of TC projects in Member States

  8. Selected Aspects of Assessment/Improvement of Academic Research Quality, Also of Industrial Management

    Directory of Open Access Journals (Sweden)

    Jemala Marek

    2016-06-01

    Full Text Available In terms of publishing and commercialisation of academic research results, there may be more preferred qualitative research in the long term. But, not every research can be focused only on the quality of its outputs, but each output of the research, however, should have an adequate quality and added value. The main research question of this article may be determined as follows – How can the quality of academic research be better evaluated and thus improved, also in the area of Industrial management? It is not the intention of this article to perform statistical research in the field yet, but this study is based on empirical data and results.

  9. Emerging organic contaminants in surface water and groundwater: a first overview of the situation in Italy.

    Science.gov (United States)

    Meffe, Raffaella; de Bustamante, Irene

    2014-05-15

    This paper provides the first review of the occurrence of 161 emerging organic compounds (EOCs) in Italian surface water and groundwater. The reported EOCs belong to the groups of industrials, pharmaceuticals, estrogens and illicit drugs. Occurrence of 137 pesticides was also reported. The reviewed research works have been published between 1997 and 2013. The majority of the studies have been carried out in Northern Italy (n. 30) and to a lower extent in Central Italy (n. 13). Only a limited number of research studies report EOC concentrations in water resources of Southern Italy. The EOCs that have been more frequently studied are in the following descending order, pesticides (16), pharmaceuticals (15), industrials (13), estrogens (7) and illicit drugs (2). Research activities investigating the EOC occurrence in surface water are more numerous than those in groundwater. This is consistent with the higher complexity involved in groundwater sampling and EOC detection. Among the reported EOCs, industrials and pesticides are those occurring in both surface water and groundwater with the highest concentrations (up to 15 × 10(6) and 4.78 × 0(5)ng L(-1), respectively). Concentrations of pharmaceuticals in surface water reach a maximum of 3.59 × 10(3)ng L(-1), whereas only the antimicrobial agent josamycin has been encountered in groundwater with a concentration higher than 100 ng L(-1). Both estrogens and illicit drugs appeared in surface water with concentrations lower than 50 ng L(-1). Groundwater concentrations for estrogens were measured to be below the detection limits, whereas illicit drugs have so far not been studied in groundwater. The present review reveals the serious contamination status of Italian surface water and groundwater especially by pesticides, industrials and to a lower extent by pharmaceuticals and the necessity to foster the research on EOC occurrence in Italian water resources, in particular in Southern Italy where a limited number of

  10. Federal agencies active in chemical industry-related research and development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-29

    The Energy Policy Act of 1992 calls for a program to further the commercialization of renewable energy and energy efficient technologies for the industrial sector.. The primary objective of the Office of Industrial Technologies Chemical Industry Team is to work in partnership with the US chemical industry to maximize economic, energy, and environmental benefits through research and development of innovative technologies. This document was developed to inventory organizations within the federal government on current chemical industry-related research and development. While an amount of funding or number of projects specifically relating to chemical industry research and development was not defined in all organizations, identified were about 60 distinct organizations representing 7 cabinet-level departments and 4 independent agencies, with research efforts exceeding $3.5 billion in fiscal year 1995. Effort were found to range from less than $500 thousand per year at the Departments of Agriculture and the Interior to over $100 million per year at the Departments of Commerce, Defense, Energy, and Health and Human Services and the National Aeronautics and Space Administration. The total number of projects in these programs exceeded 10,000. This document is complete to the extent that agencies volunteered information. Additions, corrections, and changes are encouraged and will be incorporated in future revisions.

  11. Research on the competitiveness and development strategy of china's modern coal chemical industry

    Science.gov (United States)

    Wang, Q.; Han, Y. J.; Yu, Z. F.

    2016-08-01

    China's modern coal chemical industry has grown into a certain scale after over a decade of development, and remarkable progress has been made in key technologies. But as oil price collapsed since 2015, the economic benefit of the industry also slumped, with loud controversies in China over the necessity of modern coal chemical industry. The research believes that the modern coal chemical industry plays a positive role in the clean and sustainable exploitation of coal in China. It makes profit when oil price is no lower than 60/bbl, and outperforms petrochemical in terms of cost effectiveness when the price is between 60/bbl and 80/bbl. Given the low oil price and challenges posed by environmental protection and water restraints, we suggest that the state announce a guideline quickly, with adjusted tax policies and an encouragement to technological innovation, so that the modern coal chemical industry in China can grow sound and stable.

  12. Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges

    Science.gov (United States)

    Chen, Yuanfang; Lee, Gyu Myoung; Shu, Lei; Crespi, Noel

    2016-01-01

    The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases) is an important research issue in the industrial applications of the Internet of Things (IoT). An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices) dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI) framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well. PMID:26861345

  13. Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges.

    Science.gov (United States)

    Chen, Yuanfang; Lee, Gyu Myoung; Shu, Lei; Crespi, Noel

    2016-02-06

    The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases) is an important research issue in the industrial applications of the Internet of Things (IoT). An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices) dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI) framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well.

  14. Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges

    Directory of Open Access Journals (Sweden)

    Yuanfang Chen

    2016-02-01

    Full Text Available The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases is an important research issue in the industrial applications of the Internet of Things (IoT. An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well.

  15. 76 FR 6497 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Industrial...

    Science.gov (United States)

    2011-02-04

    ..., 15 U.S.C. 4301 et seq. (``the Act''), Industrial Nacromolecular Crystallography Association (``INCA... activity of the group research project. Membership in this group research project remains open, and INCA..., INCA filed its original notification pursuant to Section 6(a) of the Act. The Department of Justice...

  16. INNOVATIVE AND INDUSTRIAL-PERFORMANCE IN PHARMACEUTICAL RESEARCH-AND-DEVELOPMENT, A MANAGEMENT CONTROL PERSPECTIVE

    NARCIS (Netherlands)

    OMTA, SWF; BOUTER, LM; VANENGELEN, JML

    In this paper management control is related to innovative and industrial performance in 14 non-biotech pharmaceutical companies. The study consisted of questionnaires, sent to the heads of the different research departments of European research laboratories of leading pharmaceutical companies,

  17. The Research Paper as an Object of Communication in Industrial Design Educations

    DEFF Research Database (Denmark)

    Thomsen, Bente Dahl; Botin, Lars

    2014-01-01

    The preparation of papers provides students at industrial design education´s an opportunity to gain experience with design research and papers as an object of communication. Design research is an interdisciplinary field that is both relatively new and with a blurred borderline to the professional...

  18. Undergraduates' Perceptions of Conflict of Interest in Industry-Sponsored Research

    Science.gov (United States)

    Perry, Heather Brodie

    2018-01-01

    The prevalence of industry-sponsored research has led to significant concerns about financial conflicts of interest and the impact on research findings. This case study sought to examine how students considered conflict of interest when establishing the cognitive authority of a journal article. The case study used a mixed methods pretest and…

  19. Research activities of Samsung Heavy Industries in the conservation of the environment

    International Nuclear Information System (INIS)

    Han, B.; Kim, D.K.; Pikaev, A.K.

    1998-01-01

    Research activities for accelerator fields at Samsung Heavy Industries could be categorized into the accelerator development and its industrial applications. As the initial step of the efforts, high voltage industrial electron accelerators are developed, and development of synchrotron light source and other accelerators are also investigated. The research activities for the applications of accelerator include wastewater treatment, combustion flue gas purification, semiconductor treatment, and other radio-chemical processing. For wastewater treatment, an electron beam pilot plant for treating 1,000m 3 /day of wastewater from 60,000m 3 /day of total dyeing wastewater is under construction in Taegu Dyeing Industrial Complex. A commercial plant for re-circulation of wastewater from papermill company is also under construction in S-paper Co. in Cheongwon city, and after the successful installation, up to 80% of wastewater could be re-used in paper producing process

  20. Coordination among industry, academic society and regulatory body in the research on aging management

    International Nuclear Information System (INIS)

    Ishigaki, Hiroki; Osaki, Toru; Kanno, Masanori; Miyano, Hiroshi

    2010-01-01

    Many activities for the coordinated research on aging management are reviewed, and examples of fruitful results are introduced according to the technical strategy map. Industry-Academia-Government exchanging system of the information each other on aging management was established for autonomy, diversity, collaboration. To clarify the concept of the role of industry, government and academia to address aging management without duplication algorithm is for the overall coordination of industrial and academic information and response issues, technological strategy map for aging management formulated. (author)

  1. PLM in the Food Industry: An Explorative Empirical Research in the Italian Market

    OpenAIRE

    Pinna , Claudia; Taisch , Marco; Terzi , Sergio

    2016-01-01

    Part 5: PLM and Innovation; International audience; The Food and Beverage (F&B) industry has a unique role in all countries’ economies because it is essential to people lives. In this paper, the focus will be on the Italian food industry, one of the main food producer. This study will present the first results of a wider research that has as main aim to understand how PLM is adopted in the food industry, its limits and its challenges. Indeed, the first results show the level of knowledge of P...

  2. The research on visual industrial robot which adopts fuzzy PID control algorithm

    Science.gov (United States)

    Feng, Yifei; Lu, Guoping; Yue, Lulin; Jiang, Weifeng; Zhang, Ye

    2017-03-01

    The control system of six degrees of freedom visual industrial robot based on the control mode of multi-axis motion control cards and PC was researched. For the variable, non-linear characteristics of industrial robot`s servo system, adaptive fuzzy PID controller was adopted. It achieved better control effort. In the vision system, a CCD camera was used to acquire signals and send them to video processing card. After processing, PC controls the six joints` motion by motion control cards. By experiment, manipulator can operate with machine tool and vision system to realize the function of grasp, process and verify. It has influence on the manufacturing of the industrial robot.

  3. Research of mountain rocks of Georgia for using in glass materials industry

    International Nuclear Information System (INIS)

    Gabunia, L.; Gabunia, N.; Jakhva, N.; Napetvaridze, Ts.; Alibegashvili, M.

    2009-01-01

    The article presents the results of the research of mountain rocks of Georgia in various peaces of basalts, andesite, andesite-basalt porphyry and trachite deposits in order to be used in the industry of fiber, glass-crystal materials and fasade decorative tiles. The prospects of basalt and andesite-basalt porphyry use in the industry of fiber materials in the form of monocomponents has been stated. The technology of obtaining of wear resistant, chemically stable and colored glass-crystal on the basis of andesit and trachyte, has been worked out and approved in industry. (author)

  4. Research Investments and Market Structure in the Food Processing, Agricultural Input, and Biofuel Industries Worldwide

    OpenAIRE

    Fuglie, Keith O.; Heisey, Paul W.; King, John L.; Day-Rubenstein, Kelly A.; Schimmelpfennig, David E.; Wang, Sun Ling

    2011-01-01

    Meeting growing global demand for food, fiber, and biofuel requires robust investment in agricultural research and development (R&D) from both public and private sectors. This study examines global R&D spending by private industry in seven agricultural input sectors, food manufacturing, and biofuel and describes the changing structure of these industries. In 2007 (the latest year for which comprehensive estimates are available), the private sector spent $19.7 billion on food and agricultural ...

  5. Size and Distribution of Research Benefits in the Australian Dairy Industry

    OpenAIRE

    Liu, Esther; Tarrant, Katherine A.; Ho, Christie K.M.; Malcolm, Bill; Griffith, Garry R.

    2012-01-01

    An equilibrium displacement model of the Australian dairy industry is being developed for estimating the net benefits from dairy research undertaken by DPI Victoria. In this initial version, the dairy industry is represented by a system of aggregate demand and supply relationships for two input sectors, raw milk and milk processing inputs, and three output sectors, export and domestic manufactured milk and domestic fluid milk. Quantities and prices are calibrated in terms of milk equivalents....

  6. Past, Present, and Future Business-to-Business and Industrial Marketing Research

    DEFF Research Database (Denmark)

    Lindgreen, Adam; Di Benedetto, C. Anthony; Geersbro, Jens

    2018-01-01

    This editorial summarizes both the development and impact of Peter LaPlaca, in terms of his work with and for the industrial and marketing purchasing research community, using several different perspectives. It also offers an overview of what (former) editors of other business-to-business marketing...... management journals think of Peter LaPlaca. Following that, this editorial briefly reviews dominant topics in Industrial Marketing Management....

  7. Hydrochemistry and Characteristics of Groundwater: Case Study Water Contamination at Citarum River Upstream

    Directory of Open Access Journals (Sweden)

    Mohamad Sapari Dwi Hadian

    2017-12-01

    Full Text Available Rancaekek and Sayang area, West Java, are the area where many industrial factories are located.Thus, the region becomes the targeted destination for industrial development.The  population in the area is rising due to the growth of industries causing the regional development becomes uncontrollable. In addition, the constant increment of waste and also poor-coordinated disposal systems may result in groundwater contamination in the areas. The rapid growth of the area increase the need for groundwater as well as the need for more research about contamination at Rancaekek and Sayang. The research aims to explore the spread of groundwater contamination in the area. The research method is carried out based on the analysis of Geological Mapping, Hydrogeological Mapping and chemical characteristics of the groundwater in the area. Chemical analyses of the groundwater were conducted through laboratory test of groundwater samples at specific spots of dug wells. The lab test results were further analyzed to determine the contamination zone. The findings reveal that the distribution of contamination in the area follow the shallow ground water flow patterns, the water contamination contains heavy metal and there is degradation of soil fertility. The findings suggest the stakeholders to delineate the contaminated area, and increase the dissemination of environmental awareness.

  8. [A critical assessment of the relation between the food industry and health research].

    Science.gov (United States)

    León Mengíbar, Josep; Pastor-Valero, María; Hernández Aguado, Ildefonso

    To describe the influence of the food industry in health research, observing how funding influences health outcomes and the quality of the studies. We performed a systematic review in MEDLINE, Cochrane Library Plus and Scopus using the MESH "Food Industry", "Food-Processing Industry", "Biomedical Research", "Research Support as Topic", and the keywords "Industry Sponsorship" and "Funding Source". The quality was assessed using the PRISMA guidelines. We revised 1,506 articles and 10 were included; two reviewed the relationship between funding-outcomes and quality-outcomes; six focused on the funding-outcomes relationship; and the other two focused on methodological quality. Six showed that funding from the food industry resulted in more favourable outcomes for their products. No differences in quality were found in relation to the funding source, but those which did not declare their funding had a worse quality. Studies funded by the food industry showed favourable results for their products. However, this fact did not affect the quality of the studies. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  9. Design for energy efficiency: Energy efficient industrialized housing research program. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Kellett, R.; Berg, R.; Paz, A.; Brown, G.Z.

    1991-03-01

    Since 1989, the U.S. Department of Energy has sponsored the Energy Efficient Industrialized Housing research program (EEIH) to improve the energy efficiency of industrialized housing. Two research centers share responsibility for this program: The Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. Additional funding is provided through the participation of private industry, state governments and utilities. The program is guided by a steering committee comprised of industry and government representatives. This report summarizes Fiscal Year (FY) 1990 activities and progress, and proposed activities for FY 1991 in Task 2.1 Design for Energy Efficiency. This task establishes a vision of energy conservation opportunities in critical regions, market segments, climate zones and manufacturing strategies significant to industrialized housing in the 21st Century. In early FY 1990, four problem statements were developed to define future housing demand scenarios inclusive of issues of energy efficiency, housing design and manufacturing. Literature surveys were completed to assess seven areas of influence for industrialized housing and energy conservation in the future. Fifty-five future trends were identified in computing and design process; manufacturing process; construction materials, components and systems; energy and environment; demographic context; economic context; and planning policy and regulatory context.

  10. Mathematical models and their applications to isotope studies in groundwater hydrology. Proceedings of a final research co-ordination meeting held in Vienna, 1-4 June 1993

    International Nuclear Information System (INIS)

    1994-12-01

    Tracer Techniques have proved to be useful tool for assessing, developing and water management of water resources. IAEA initiated a co-ordinated research programme (CRP) to improve quantitative evaluation of isotope data collected in groundwater hydrology. This publication compiles papers summarizing the results and findings of the work undertaken by participating institutes. Both mathematical modelling and their applications to isotope data on actual field results are covered. Refs, figs and tabs

  11. Nutrition labelling: a review of research on consumer and industry response in the global South

    Directory of Open Access Journals (Sweden)

    Jessie Mandle

    2015-01-01

    Full Text Available Background: To identify peer-reviewed research on consumers’ usage and attitudes towards the nutrition label and the food industry's response to labelling regulations outside Europe, North America, and Australia and to determine knowledge gaps for future research. Design: Narrative review. Results: This review identified nutrition labelling research from 20 countries in Asia, Africa, the Middle East, and Latin America. Consumers prefer that pre-packaged food include nutrition information, although there is a disparity between rates of use and comprehension. Consumer preference is for front-of-pack labelling and for information that shows per serving or portion as a reference unit, and label formats with graphics or symbols. Research on the food and beverage industry's response is more limited but shows that industry plays an active role in influencing legislation and regulation. Conclusions: Consumers around the world share preferences with consumers in higher income countries with respect to labelling. However, this may reflect the research study populations, who are often better educated than the general population. Investigation is required into how nutrition labels are received in emerging economies especially among the urban and rural poor, in order to assess the effectiveness of labelling policies. Further research into the outlook of the food and beverage industry, and also on expanded labelling regulations is a priority. Sharing context-specific research regarding labelling between countries in the global South could be mutually beneficial in evaluating obesity prevention policies and strategies.

  12. Nutrition labelling: a review of research on consumer and industry response in the global South.

    Science.gov (United States)

    Mandle, Jessie; Tugendhaft, Aviva; Michalow, Julia; Hofman, Karen

    2015-01-01

    To identify peer-reviewed research on consumers' usage and attitudes towards the nutrition label and the food industry's response to labelling regulations outside Europe, North America, and Australia and to determine knowledge gaps for future research. Narrative review. This review identified nutrition labelling research from 20 countries in Asia, Africa, the Middle East, and Latin America. Consumers prefer that pre-packaged food include nutrition information, although there is a disparity between rates of use and comprehension. Consumer preference is for front-of-pack labelling and for information that shows per serving or portion as a reference unit, and label formats with graphics or symbols. Research on the food and beverage industry's response is more limited but shows that industry plays an active role in influencing legislation and regulation. Consumers around the world share preferences with consumers in higher income countries with respect to labelling. However, this may reflect the research study populations, who are often better educated than the general population. Investigation is required into how nutrition labels are received in emerging economies especially among the urban and rural poor, in order to assess the effectiveness of labelling policies. Further research into the outlook of the food and beverage industry, and also on expanded labelling regulations is a priority. Sharing context-specific research regarding labelling between countries in the global South could be mutually beneficial in evaluating obesity prevention policies and strategies.

  13. Nutrition labelling: a review of research on consumer and industry response in the global South

    Science.gov (United States)

    Mandle, Jessie; Tugendhaft, Aviva; Michalow, Julia; Hofman, Karen

    2015-01-01

    Background To identify peer-reviewed research on consumers’ usage and attitudes towards the nutrition label and the food industry's response to labelling regulations outside Europe, North America, and Australia and to determine knowledge gaps for future research. Design Narrative review. Results This review identified nutrition labelling research from 20 countries in Asia, Africa, the Middle East, and Latin America. Consumers prefer that pre-packaged food include nutrition information, although there is a disparity between rates of use and comprehension. Consumer preference is for front-of-pack labelling and for information that shows per serving or portion as a reference unit, and label formats with graphics or symbols. Research on the food and beverage industry's response is more limited but shows that industry plays an active role in influencing legislation and regulation. Conclusions Consumers around the world share preferences with consumers in higher income countries with respect to labelling. However, this may reflect the research study populations, who are often better educated than the general population. Investigation is required into how nutrition labels are received in emerging economies especially among the urban and rural poor, in order to assess the effectiveness of labelling policies. Further research into the outlook of the food and beverage industry, and also on expanded labelling regulations is a priority. Sharing context-specific research regarding labelling between countries in the global South could be mutually beneficial in evaluating obesity prevention policies and strategies. PMID:25623608

  14. COURSE : a new industry led consortium to focus and accelerate energy resources research at Alberta University

    Energy Technology Data Exchange (ETDEWEB)

    Rodgers, R.J. [Imperial Oil Resources Ltd., Calgary, AB (Canada); Bailey, R. [Alberta Oil Sands Technology and Research Authority, Edmonton, AB (Canada); Kirk, M. [Calgary Univ., AB (Canada); Luhning, R.W. [Petroleum Recovery Inst., Calgary, AB (Canada); Kratochvil, R. [Alberta Univ., Edmonton, AB (Canada)

    2000-06-01

    This paper described a new initiative entitled COURSE (Coordination of University Research for Synergy and Effectiveness) which has been created through the collaboration of the energy industry, universities and the Alberta government to promote research in the field of energy resources. Calls for research proposals went out in June 1999 and January 2000. The selected projects will be funded by the Alberta Ministry of Innovation and Science through the Alberta Oil Sands Technology and Research Authority (AOSTRA). The major objectives of COURSE are to increase and align fundamental breakthrough university research with the industry needs, and to provide results that exceed what would be achieved by one university alone. An agreement has been reached whereby the universities own the technology and are the exclusive license agents of the research.

  15. Research on industrialization of electric vehicles with its demand forecast using exponential smoothing method

    Directory of Open Access Journals (Sweden)

    Zhanglin Peng

    2015-04-01

    Full Text Available Purpose: Electric vehicles industry has gotten a rapid development in the world, especially in the developed countries, but still has a gap among different countries or regions. The advanced industrialization experiences of the EVs in the developed countries will have a great helpful for the development of EVs industrialization in the developing countries. This paper seeks to research the industrialization path & prospect of American EVs by forecasting electric vehicles demand and its proportion to the whole car sales based on the historical 37 EVs monthly sales and Cars monthly sales spanning from Dec. 2010 to Dec. 2013, and find out the key measurements to help Chinese government and automobile enterprises to promote Chinese EVs industrialization. Design/methodology: Compared with Single Exponential Smoothing method and Double Exponential Smoothing method, Triple exponential smoothing method is improved and applied in this study. Findings: The research results show that:  American EVs industry will keep a sustained growth in the next 3 months.  Price of the EVs, price of fossil oil, number of charging station, EVs technology and the government market & taxation polices have a different influence to EVs sales. So EVs manufacturers and policy-makers can adjust or reformulate some technology tactics and market measurements according to the forecast results. China can learn from American EVs polices and measurements to develop Chinese EVs industry. Originality/value: The main contribution of this paper is to use the triple exponential smoothing method to forecast the electric vehicles demand and its proportion to the whole automobile sales, and analyze the industrial development of Chinese electric vehicles by American EVs industry.

  16. Measuring macro-level effects of the global economic recession on university-industry research cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Azagra-Caro, J.M.; Tijssen, R.J.W.; Yegros-Yegros, A.

    2016-07-01

    The 2007/2008 financial crisis, and ensuing economic recession, had a direct negative effect on university-industry research cooperation in the OECD countries and other economies – it diminished the number of university-industry co-authored research publications (UICs) during the period 2008-13 by 7%. It also changed the relationship between national business expenditure on R&D and UIC output levels. Before the recession the relationship was negative, but became positive during the years 2008-2013. The few countries where business expenditure on R&D increased during recession saw UIC numbers rise. This moderating effect of the recession applies only to ‘domestic UICs’, where universities cooperated with business companies located in the same country. Micro-level research is needed to assess the contributing effects on large university-industry R&D consortia on both domestic and international collaboration patterns. (Author)

  17. Computer-model analysis of ground-water flow and simulated effects of contaminant remediation at Naval Weapons Industrial Reserve Plant, Dallas, Texas

    Science.gov (United States)

    Barker, Rene A.; Braun, Christopher L.

    2000-01-01

    In June 1993, the Department of the Navy, Southern Division Naval Facilities Engineering Command (SOUTHDIV), began a Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) of the Naval Weapons Industrial Reserve Plant (NWIRP) in north-central Texas. The RFI has found trichloroethene, dichloroethene, vinyl chloride, as well as chromium, lead, and other metallic residuum in the shallow alluvial aquifer underlying NWIRP. These findings and the possibility of on-site or off-site migration of contaminants prompted the need for a ground-water-flow model of the NWIRP area. The resulting U.S. Geological Survey (USGS) model: (1) defines aquifer properties, (2) computes water budgets, (3) delineates major flowpaths, and (4) simulates hydrologic effects of remediation activity. In addition to assisting with particle-tracking analyses, the calibrated model could support solute-transport modeling as well as help evaluate the effects of potential corrective action. The USGS model simulates steadystate and transient conditions of ground-water flow within a single model layer.The alluvial aquifer is within fluvial terrace deposits of Pleistocene age, which unconformably overlie the relatively impermeable Eagle Ford Shale of Late Cretaceous age. Over small distances and short periods, finer grained parts of the aquifer are separated hydraulically; however, most of the aquifer is connected circuitously through randomly distributed coarser grained sediments. The top of the underlying Eagle Ford Shale, a regional confining unit, is assumed to be the effective lower limit of ground-water circulation and chemical contamination.The calibrated steady-state model reproduces long-term average water levels within +5.1 or –3.5 feet of those observed; the standard error of the estimate is 1.07 feet with a mean residual of 0.02 foot. Hydraulic conductivity values range from 0.75 to 7.5 feet per day, and average about 4 feet per day. Specific yield values range from 0

  18. Innovative methods to stabilize liquid membranes for removal of radionuclides from groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Lokhandwala, K. [Membrane Technology and Research, Inc., Menlo Park, CA (United States)

    1997-10-01

    In this Phase I Small Business Innovation Research program, Membrane Technology Research, Inc., is developing a stable liquid membrane for extracting uranium and other radionuclides from groundwater. The improved membrane can also be applied to separation of other metal ions from aqueous streams in industrial operations.

  19. Application of artificial neural network model for groundwater level forecasting in a river island with artificial influencing factors

    Science.gov (United States)

    Lee, Sanghoon; Yoon, Heesung; Park, Byeong-Hak; Lee, Kang-Kun

    2017-04-01

    Groundwater use has been increased for various purposes like agriculture, industry or drinking water in recent years, the issue related to sustainability on the groundwater use also has been raised. Accordingly, forecasting the groundwater level is of great importance for planning sustainable use of groundwater. In a small island surrounded by the Han River, South Korea, seasonal fluctuation of the groundwater level is characterized by multiple factors such as recharge/discharge event of the Paldang dam, Water Curtain Cultivation (WCC) during the winter season, operation of Groundwater Heat Pump System (GWHP). For a period when the dam operation is only occurred in the study area, a prediction of the groundwater level can be easily achieved by a simple cross-correlation model. However, for a period when the WCC and the GWHP systems are working together, the groundwater level prediction is challenging due to its unpredictable operation of the two systems. This study performed Artificial Neural Network (ANN) model to forecast the groundwater level in the river area reflecting the various predictable/unpredictable factors. For constructing the ANN models, two monitoring wells, YSN1 and YSO8, which are located near the injection and abstraction wells for the GWHP system were selected, respectively. By training with the groundwater level data measured in January 2015 to August 2015, response of groundwater level by each of the surface water level, the WCC and the GWHP system were evaluated. Consequentially, groundwater levels in December 2015 to March 2016 were predicted by ANN models, providing optimal fits in comparison to the observed water levels. This study suggests that the ANN model is a useful tool to forecast the groundwater level in terms of the management of groundwater. Acknowledgement : Financial support was provided by the "R&D Project on Environmental Management of Geologic CO2 Storage" from the KEITI (Project Number: 2014001810003) This research was

  20. The Roles of Shallow and Deep Groundwater Storage During Drought at Panola Mountain Research Watershed, Georgia, U.S.A.

    Science.gov (United States)

    Aulenbach, B. T.; Peters, N. E.

    2016-12-01

    Southeastern U.S. experiences recurring droughts, which can reduce water availability and can result in water-limiting conditions. Monthly water budgets were estimated at Panola Mountain Research Watershed, a small 41-hectare forested watershed near Atlanta, Georgia, from 1985 through 2015, to quantify the effects of climatic variability on groundwater (GW) storage. A relation between stream base flow and watershed GW storage was developed. The relation indicated that both shallow and deep GW storage contribute to base-flow runoff, except for the bottom third (78 mm) of the range in observed shallow soil moisture. The base flow-storage relation was then used to estimate monthly evapotranspiration (ET) using a closed water budget approach. Growing season droughts were almost always preceded by low GW storage at the onset of the growing season. The low base flow and GW storage conditions were caused by low precipitation (P) during the dormant season, and to a lesser extent, carryover of low GW storage conditions from the previous growing season. Growing season P had little impact on drought, as most P ultimately resulted in ET instead of deeper GW recharge. Water-limited growing season conditions were indicated when potential ET (PET) >> ET, and occurred during months having a large "P-deficit", PET - P, and when shallow storage was already near its observed minimum—such that the P-deficits exceeded the extractable water in shallow storage. These observations can be used to hypothesize how projected future increases in temperature, and how resulting increases in PET affect water budgets in Southeastern U.S. The dormant season will become shorter and ET will increase, causing decreased GW recharge during the dormant season, and will result in more frequent and severe growing season droughts. Higher growing season PET would increase the frequency and duration of water limiting conditions due to higher P-deficits and more frequent occurrences of low shallow storage.

  1. Ground-water travel time

    International Nuclear Information System (INIS)

    Bentley, H.; Grisak, G.

    1985-01-01

    The Containment and Isolation Working Group considered issues related to the postclosure behavior of repositories in crystalline rock. This working group was further divided into subgroups to consider the progress since the 1978 GAIN Symposium and identify research needs in the individual areas of regional ground-water flow, ground-water travel time, fractional release, and cumulative release. The analysis and findings of the Ground-Water Travel Time Subgroup are presented

  2. Regional ground-water system

    International Nuclear Information System (INIS)

    Long, J.

    1985-01-01

    The Containment and Isolation Working Group considered issues related to the postclosure behavior of repositories in crystalline rock. This working group was further divided into subgroups to consider the progress since the 1978 GAIN Symposium and identify research needs in the individual areas of regional ground-water flow, ground-water travel time, fractional release, and cumulative release. The analysis and findings of the Ground-Water Regime Subgroup are presented

  3. A proposed groundwater management framework for municipalities ...

    African Journals Online (AJOL)

    A proposed groundwater management framework for municipalities in South Africa. ... Hence, the Water Research Commission (WRC) has commissioned a project ... and available tools to achieve sustainable groundwater management reflect ...

  4. Synergy between research activity and management procedures in an industrial waste treatment

    International Nuclear Information System (INIS)

    Bertanza, G.; Collivignarelli, M.C.; Zanaboni, S.

    2006-01-01

    The optimization of operation criteria for centralized industrial waste treatment plants is a difficult task. Experimental research can be a useful tool for understanding how to carry out this optimization process; however, in order to obtain proper solution, a very close connection must been observed activity and the field (e.g. practical application at the full scale). In this paper a three years successful experience is described: the research was carried out in an industrial waste treatment facility located in Northern Italy. Thanks to a close interaction between management and research activities, a significant synergy was achieved: in fact, interesting and original suggestions for the research arose from plant monitoring, and the first findings of the research have already led to important improvements in the full scale plant management [it

  5. The EC Maritime Industries Forum 1992: Marine resources and research and development

    International Nuclear Information System (INIS)

    Jenisch, U.K.

    1993-01-01

    The Maritime Industries Forum (MIF) of the European Community has prepared a comprehensive report covering all the EC maritime industries. The report, published on October 29, 1992, addresses maritime activities such as shipbuilding, shipping, fishing, energy, marine resources and environmental protection. Focal points are research and development measures and strategies. A major objective is to strengthen the competitiveness of the maritime industries via a global and horizontal approach. This paper briefly analyses the M.I.F. Report and concentrates on the EC interests in the field of marine resources such as oil and gas, potable water, aquaculture and fishing, minerals, OTEC/DOWA as well as the environmentally sound technology that is required to allow for a future oriented and sustainable exploitation. Export opportunities for such new technologies and cooperation with third states are an important objective. The proposals of the M.I.F. Report are of a positive, future-oriented nature, appropriate to replace many of the hitherto defensive policies in the maritime area. The industries recognize the responsibility for the revitalization of their industrial sectors. The method of this broad sectoral approach for a new industrial policy in Europe is innovative and a model in itself. With the installation of three specialized new industrial panels in January 1993 the work continues

  6. Uncertainty in the Sphere of the Industry 4.0 – Potential Areas to Research

    Directory of Open Access Journals (Sweden)

    Andrzej Magruk

    2016-12-01

    Full Text Available The world stands on the threshold of a new age of technology, which will launch a fourth industrial revolution (Industry 4.0. According to this idea, web-based network will support smart factories at every stage of the work on the product, from design through to servicing and recycling. It is a vision of a world in which the real environment connects to the digital one using follows driving forces: Internet of things, cloud computing, big data, cyber-physical systems, and others. The Industry 4.0 concept is based on developing smart chains preparation based on communicating with each other means of production, products, components, plants, humans. Established in Germany, the concept of Industry 4.0, is the brainchild – its beginning reaches 2011. It is therefore fraught with high level of uncertainty in many aspects (economic, social, technological, legal, etc.. The main aim of this article is to analyze different dimensions of uncertainty regarding the Industry 4.0, both in terms of opportunities and threats. Due to the freshness of the topic and the great complexity of the Industry 4.0 phenomenon, the main aim of the article is to identify potential areas requiring the necessary research in order minimizing negative – today uncertain – effects occurring in both the design concept Industry 4.0 as well as during its functioning.

  7. Responsible Research and Innovation in industry-challenges, insights and perspectives

    DEFF Research Database (Denmark)

    Martinuzzi, André; Blok, Vincent; Brem, Alexander

    2018-01-01

    empirical and conceptual contributions that explore corporate motivations to adopt RRI, the state of implementation of concrete RRI practices, the role of stakeholders in responsible innovation processes, as well as drivers and barriers to the further diffusion of RRI in industry. Overall......The responsibility of industry towards society and the environment is a much discussed topic, both in academia and in business. Responsible Research and Innovation (RRI) has recently emerged as a new concept with the potential to advance this discourse in light of two major challenges industry...... is facing today. The first relates to the accelerating race to innovate in order to stay competitive in a rapidly changing world. The second concerns the need to maintain public trust in industry through innovations that generate social value in addition to economic returns. This Special Issue provides...

  8. Environmental research programme. Ecological research. Annual report 1994. Urban-industrial landscapes, forests, agricultural landscapes, river and lake landscapes, terrestrial ecosystem research, environmental pollution and health

    International Nuclear Information System (INIS)

    1995-01-01

    In the annual report 1994 of the Federal Ministry of Research and Technology, the points of emphasis of the ecological research programme and their financing are discussed. The individual projects in the following subject areas are described in detail: urban-industrial landscapes, forests, agricultural landscapes, river and lake landscapes, other ecosystems and landscapes, terrestrial ecosystem research, environmental pollution and human health and cross-sectional activities in ecological research. (vhe) [de

  9. Simplified Method for Groundwater Treatment Using Dilution and Ceramic Filter

    Science.gov (United States)

    Musa, S.; Ariff, N. A.; Kadir, M. N. Abdul; Denan, F.

    2016-07-01

    Groundwater is one of the natural resources that is not susceptible to pollutants. However, increasing activities of municipal, industrial, agricultural or extreme land use activities have resulted in groundwater contamination as occured at the Research Centre for Soft Soil Malaysia (RECESS), Universiti Tun Hussein Onn Malaysia (UTHM). Thus, aims of this study is to treat groundwater by using rainwater and simple ceramic filter as a treatment agent. The treatment uses rain water dilution, ceramic filters and combined method of dilute and filtering as an alternate treatment which are simple and more practical compared to modern or chemical methods. The water went through dilution treatment processes able to get rid of 57% reduction compared to initial condition. Meanwhile, the water that passes through the filtering process successfully get rid of as much as 86% groundwater parameters where only chloride does not pass the standard. Favorable results for the combination methods of dilution and filtration methods that can succesfully eliminate 100% parameters that donot pass the standards of the Ministry of Health and the Interim National Drinking Water Quality Standard such as those found in groundwater in RECESS, UTHM especially sulfate and chloride. As a result, it allows the raw water that will use clean drinking water and safe. It also proves that the method used in this study is very effective in improving the quality of groundwater.

  10. Energy research in the mechanical forest industry 1980-1982. Summary

    Energy Technology Data Exchange (ETDEWEB)

    Usenius, A.

    1982-12-01

    The energy research project of the mechanical forest industry studied the energy consumption in 1979 and the possibilities to save energy in the sawmill, plywood, particleboard, fibreboard, joinery, wooden houses, gluelam and impregnation industries. The energy consumption per product unit is on the minimum level in sawmilling, 1.38 GJ/m/sup 3/, and on the maximum level in fibreboard manufacturing, 9.98 GJ/t. In plywood production, 6.95 GJ/m/sup 3/, the energy consumption is about double compared with the consumption in particleboard production, 3.40 GJ/m/sup 3/. The main part of the energy is heat. In the drying process about 70-85% of the total energy is used in individual processes. Over a half, 53.9%, of the total energy consumption, 23 169 TJ, is used in sawmill industry. The proportion of plywood industry is 19.2%, of particleboard industry 12.2% and of fibreboard industry 7.2%. The proportion of the processing industry is 7.5%; the main part is used in joinery industry. The fuel consumption in transportation of wooden raw materials was 2 260 TJ and in transportation of products 4 800 TJ. In fibreboard industry it is possible to save energy by leading the waste steam from defibratory into chip silos for preheating of the chips. In veneer and chip drying it is possible to save energy by using higher moisture content of the drying air and by utilizing the drying capacity as well as possible. In kiln drying of timber the changing of drying circumstances can in some cases save 50-150 FIM per 1 cbm of dried timber.

  11. Review: Micro-organic contaminants in groundwater in China

    Science.gov (United States)

    Dong, Weihong; Xie, Wei; Su, Xiaosi; Wen, Chuanlei; Cao, Zhipeng; Wan, Yuyu

    2018-03-01

    Micro-organic contaminants (MOs) in groundwater, which may have adverse effects on human health and ecosystems worldwide, are gaining increased attention in China. A great deal of research has been conducted to investigate their sources, occurrences and behavior in aquifers. This paper reviews the main sources, distribution, concentrations and behavior of a wide range of MOs in groundwater in China. These MOs include well-established persistent organic pollutants—polycyclic aromatic hydrocarbons (PAHs), hexachlorocyclohexanes (HCHs), polychlorinated biphenyls (PCBs), endocrine disrupting chemicals (poly brominated diphenyl ethers (PBDEs), phthalic acid esters (PAEs), bisphenol A (BPA)—and some contaminants of emerging concern such as pharmaceutical and personal care products (antibiotics, caffeine, shampoos) and perfluorinated compounds (PFCs). The results reveal that the main MOs in groundwater are PAHs, organochlorine pesticides (OCPs), PBDEs, PAEs, and antibiotics. Moreover, some PFCs such as perfluorobutane sulfonic acid (PFBS), perfluorobutanoic acid (PFBA) and perfluorooctanoic acid (PFOA) have only recently been observed in groundwater as emerging organic contaminants. Additionally, most MOs are distributed in populated and industrialized areas such as the southeast coast of China. Finally, industrial emissions, wastewater treatment plant effluents and agricultural wastewater are found to be dominant sources of MOs in groundwater. Based on the existing pollution levels, regulation and amelioration of MOs are warranted.

  12. Benchmarking the scientific output of industrial wastewater research in Arab world by utilizing bibliometric techniques.

    Science.gov (United States)

    Zyoud, Shaher H; Al-Rawajfeh, Aiman E; Shaheen, Hafez Q; Fuchs-Hanusch, Daniela

    2016-05-01

    Rapid population growth, worsening of the climate, and severity of freshwater scarcity are global challenges. In Arab world countries, where water resources are becoming increasingly scarce, the recycling of industrial wastewater could improve the efficiency of freshwater use. The benchmarking of scientific output of industrial wastewater research in the Arab world is an initiative that could support in shaping up and improving future research activities. This study assesses the scientific output of industrial wastewater research in the Arab world. A total of 2032 documents related to industrial wastewater were retrieved from 152 journals indexed in the Scopus databases; this represents 3.6 % of the global research output. The h-index of the retrieved documents was 70. The total number of citations, at the time of data analysis, was 34,296 with an average citation of 16.88 per document. Egypt, with a total publications of 655 (32.2 %), was ranked the first among the Arab countries followed by Saudi Arabia 300 (14.7 %) and Tunisia 297 (14.6 %). Egypt also had the highest h-index, assumed with Saudi Arabia, the first place in collaboration with other countries. Seven hundred fifteen (35.2 %) documents with 66 countries in Arab/non-Arab country collaborations were identified. Arab researchers collaborated mostly with researchers from France 239 (11.7 %), followed by the USA 127 (6.2 %). The top active journal was Desalination 126 (6.2 %), and the most productive institution was the National Research Center, Egypt 169 (8.3 %), followed by the King Abdul-Aziz University, Saudi Arabia 75 (3.7 %). Environmental Science was the most prevalent field of interest 930 (45.8 %). Despite the promising indicators, there is a need to close the gap in research between the Arab world and the other nations. Optimizing the investments and developing regional experiences are key factors to promote the scientific research.

  13. Phytoremediation : an industry partner's perspective

    International Nuclear Information System (INIS)

    Jackson, L.A.

    1999-01-01

    As part of their corporate policy on environmental protection, Chevron, has taken an approach to work collaboratively with other industry members, universities and government agencies in phytoremediation research. The petroleum industry is interested in the integration of phytoremediation with the many biotechnology treatment technologies currently being used by the industry. Phytoremediation is a complex technology that does not just transfer wastes to another site, but offers in-situ final use and disposal treatment at sites anywhere in the world. Sites for potential remediation range from abandoned large refineries, chemical plants, or small urban gas stations. Research has focused on the cleanup of metals and hydrocarbons in diverse types of soil, water and groundwater conditions. This includes research into remediation of petroleum contaminants such as total petroleum hydrocarbon (TPH), polynuclear aromatic hydrocarbons as well as benzene in soil and the mechanism that occurs in the process. The ability of phytoremediation to inhibit groundwater flow and enhance degradation of TPH and volatile organic compounds in groundwater is also being studied. Chevron has developed a communication guide in order to enhance the important aspect transferring technical knowledge regarding phytoremediation into practical knowledge. Risk and cost are the two main business factors which drive the industry with regards to phytoremediation. For the risk to be small, the treatment must be both efficient and not cause problems to humans or the environment. 9 refs., 6 tabs., 1 fig

  14. A novel approach to enhance food safety: industry-academia-government partnership for applied research.

    Science.gov (United States)

    Osterholm, Michael T; Ostrowsky, Julie; Farrar, Jeff A; Gravani, Robert B; Tauxe, Robert V; Buchanan, Robert L; Hedberg, Craig W

    2009-07-01

    An independent collaborative approach was developed for stimulating research on high-priority food safety issues. The Fresh Express Produce Safety Research Initiative was launched in 2007 with $2 million in unrestricted funds from industry and independent direction and oversight from a scientific advisory panel consisting of nationally recognized food safety experts from academia and government agencies. The program had two main objectives: (i) to fund rigorous, innovative, and multidisciplinary research addressing the safety of lettuce, spinach, and other leafy greens and (ii) to share research findings as widely and quickly as possible to support the development of advanced safeguards within the fresh-cut produce industry. Sixty-five proposals were submitted in response to a publicly announced request for proposals and were competitively evaluated. Nine research projects were funded to examine underlying factors involved in Escherichia coli O157:H7 contamination of lettuce, spinach, and other leafy greens and potential strategies for preventing the spread of foodborne pathogens. Results of the studies, published in the Journal of Food Protection, help to identify promising directions for future research into potential sources and entry points of contamination and specific factors associated with harvesting, processing, transporting, and storing produce that allow contaminants to persist and proliferate. The program provides a model for leveraging the strengths of industry, academia, and government to address high-priority issues quickly and directly through applied research. This model can be productively extended to other pathogens and other leafy and nonleafy produce.

  15. Research on the neutron flux, secular equilibrium of chlorine-36 and groundwater age of the deep quaternary sediments, Hebei plain

    International Nuclear Information System (INIS)

    Dong Yuean; He Ming; Jiang Songsheng; Wu Shaoyong; Jiang Shan

    2001-01-01

    For the study of the neutron flux, secular equilibrium of chlorine-36 in the deep quaternary sediments of Hebei plain, the main chemical composition of water sand and confining bed was determined by neutron activation analysis. The mean neutron flux is 2.79 x 10 -5 cm -2 s -1 which was calculated by the chemical composition of the strata. The mean 36 Cl/Cl ratio in secular equilibrium is 1.27 x 10 -14 in the deep quaternary sediments, Hebei Plain. For the study of the groundwater age of the deep Quaternary sediments of Hebei Plain, the 36 Cl/Cl ratio of groundwater samples were determined by tandem accelerator mass spectrometry. The mixed groundwater 36 Cl/Cl ratio of the second and the third aquifer of Quaternary sediments in Baoding district is 247 x 10 -15 , that of the fourth aquifer in Baoding city is 224 x 10 -15 and the third aquifer in Cangzhou district is 40.5 x 10 -15 . The groundwater age of Baoding district was young and that of the third aquifer in Cangzhou was 229.2 ka

  16. Organization of industrial application of academic research on biocatalytic pre-treatment processes of cotton

    NARCIS (Netherlands)

    Bouwhuis, G.H. (Gerrit); Brinks, G.J. (Ger); Warmoeskerken, M.M.C.G. (Marijn)

    2011-01-01

    A lot of research effort is put in developing enzymatic treatment of textiles by focusing on the performance of enzymes on lab-scale. Despite all this work upgrading of these developments from lab-scale to industrial scale has not been really successful. Companies are nowadays confronted with rapid

  17. Biocatalytic pre-treatment processes of cotton : Industrial application of academic research

    NARCIS (Netherlands)

    Bouwhuis, G.H. (Gerrit); Bouwhuis, G.H. (Gerrit); Brinks, G.J. (Ger); Brinks, G.J. (Ger); Warmoeskerken, van M.M.C.G. (Marijn); Warmoeskerken, van M.M.C.G. (Marijn)

    2011-01-01

    Much research effort is invested in developing enzymatic treatments of textiles by focusing on the performance of enzymes at the laboratory scale. Despite all of this work, upgrading these developments from the laboratory scale to an industrial scale has not been very successful.Nowadays,companies

  18. Managing between science and industrie: An historical analysis of the Philips Research and Development Department's management

    NARCIS (Netherlands)

    Boersma, F.K.

    2007-01-01

    Purpose This paper seeks to deal with the history of Research and Development (R&D) management. It takes the history of the R&D Department of the Royal Philips Electronics of The Netherlands as an example to unravel the dynamics behind industrial R&D management. Designomethodologyoapproach This

  19. The National Nanotechnology Initiative: Research and Development Leading to a Revolution in Technology and Industry

    Science.gov (United States)

    2010-02-01

    dual-use deliveries to entice commercial interest at the earliest stages. NRO transition goals aim to create commercial “ pull ” to enable rapid... GOALI ), Partnerships for Innovation (PFI) , and Industry-University Cooperative Research Centers (IUCRC) • Partnership with small businesses and large

  20. Radioactive waste management of nuclear materials used in medicine, industry and research

    International Nuclear Information System (INIS)

    Suarez, A.A.; Miyamoto, H.

    1990-01-01

    Appropriate radioactive waste management applied to wastes resulting from the use of radionuclides for medical, research, or industrial purposes is to important as those from the nuclear fuel cycle, even considering their lower volumes. The strategy permitting reach the safety standards use procedures and administrative practices based in accumulated experience of various countries during many years. (author) [pt

  1. The Teaching-Research-Industry-Learning Nexus in Information and Communications Technology

    Science.gov (United States)

    McGill, Tanya; Armarego, Jocelyn; Koppi, Tony

    2012-01-01

    The teaching-research nexus concept has been extensively examined in the higher education literature, and the importance of industry linkages in information and communications technology (ICT) education has also been widely discussed. However, to date there has been little recognition of the full extent of relationships between aspects of…

  2. 40 Years of research at Risoe: A platform for the future - interacting with industry and society

    Energy Technology Data Exchange (ETDEWEB)

    Rosendahl, Lis; Lading, Lars [eds.

    1998-08-01

    Risoe`s 40th anniversary was celebrated June 3, 1998 by a symposium held at Risoe. The interaction of research at Risoe with academia and industry was presented in both national and international perspective. Most of the presentations are in English, a few in Danish. (au)

  3. Selected finelings on current research into applications of ionizing radiation in food industry

    International Nuclear Information System (INIS)

    Salkova, Z.

    1979-01-01

    A review is presented of research of the application of ionizing radiation in the food industry, mainly for the inhibition of potato and onion germination and for radappertization of soft fruits. Current laws governing the irradiation of food are described and the current knowledge of the practical application of the new technology is indicated. (author)

  4. R&D Characteristics and Organizational Structure: Case Studies of University-Industry Research Centers

    Science.gov (United States)

    Hart, Maureen McArthur

    2013-01-01

    Within the past few decades, university-industry research centers have been developed in large numbers and emphasized as a valuable policy tool for innovation. Yet little is known about the heterogeneity of organizational structure within these centers, which has implications regarding policy for and management of these centers. This dissertation…

  5. Fundamental Research in Engineering Education. Student Learning in Industrially Situated Virtual Laboratories

    Science.gov (United States)

    Koretsky, Milo D.; Kelly, Christine; Gummer, Edith

    2011-01-01

    The instructional design and the corresponding research on student learning of two virtual laboratories that provide an engineering task situated in an industrial context are described. In this problem-based learning environment, data are generated dynamically based on each student team's distinct choices of reactor parameters and measurements.…

  6. FY2000 survey report research and development internationalization in industrial sector among APEC economies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    A survey is conducted and a database is constructed on internationalization of research and development activities in the industrial sectors of APEC (Asia-Pacific Economic Cooperation Conference) countries, namely, on research and development support systems, research and development appropriations, research and development personnel, research VISA granting procedures and control over foreign funds, trends of research and development among private sector businesses, main research and development organizations, evaluation by private sector businesses of the research and development environments of their countries, and the like. Incorporated into the database are Australia, Brunei, Canada, Chile, China, Hong Kong, Indonesia, Japan, Korea, Malaysia, Mexico, New Zealand, Papua New Guinea, Peru, Philippines, Russia, Singapore, Chinese Taipei, Thailand, United States, and Vietnam. The database, compiled for Internet web pages, CD-ROMs, and publications, covers the industrial technology related policies of all the countries and helps understand the research and development systems, and enables access to main research organizations. The database comprises a general section dealing with the background, system constitution, and internationalization trend and a countries section collecting information on the respective countries. (NEDO)

  7. Post-industrial landscape - its identification and classification as contemporary challenges faced by geographic research

    Czech Academy of Sciences Publication Activity Database

    Kolejka, Jaromír

    2010-01-01

    Roč. 14, č. 2 (2010), s. 67-78 ISSN 1842-5135 Institutional research plan: CEZ:AV0Z30860518 Keywords : classification * geographical research * identification method * landscape structure Subject RIV: DE - Earth Magnetism, Geodesy, Geography http://studiacrescent.com/images/02_2010/09_jaromir_kolejka_post_industrial_landscape_its_identification_and_classification_as_contemporary_challenges_faced_by_geographic_.pdf

  8. Research on the Renewable Energy Industry Financing Efficiency Assessment and Mode Selection

    Directory of Open Access Journals (Sweden)

    Xiaohuan Lyu

    2018-01-01

    Full Text Available In recent years, environmental issues are attracting widespread attention by various countries around the world. In this context, the renewable energy industry has become a stimulus point for economic development and has great potential for development. Renewable energy industry financing is difficult due to its characteristics of high risk and long-term investment returns, and relying on existing financing channels make it present a glut of excess capacity. It is key to realize resource optimal allocation, solve overcapacity phenomenon and select the valid financing mode. This paper used Bloomberg New Energy Finance (BNEF data and the data envelopment analysis (DEA method to analyze the financing efficiency different parts of the global renewable energy industry and different ways of financing. It could be found that although the financing efficiency showed a trend of increasing year by year, the financing efficiency of each industry presented generally weak DEA efficiency, the comprehensive financing efficiency of wind power industry was higher. The article also found that the financing efficiency of project financing and Research and Development (R&D were relatively high, and the equity market and venture capital and private equity were less efficient. The results of this paper play an important role in the overall financing status cognizance of the renewable energy industry and give suggestions about valid financing mode choice.

  9. Assessment of emerging groundwater contaminants

    OpenAIRE

    Stuart, Marianne; Lapworth, Dan; Manamsa, Katya; Crane, Emily; White, Debbie

    2016-01-01

    Emerging contaminants in groundwater are important. These have been studied at a range of scales. An increasing range of compounds is being detected Urban areas show impact of sewage and industrial wastewater. Some ECs are probably no threat to drinking water at such µg/L concentrations, e.g. caffeine Others may prove to be in the future. There is little information on their impact on other groundwater receptors in the environment. We are still far from understanding which of these comp...

  10. RESEARCH ON INVESTMENT APPEAL AND COMPETITIVE CAPACITY OF INDUSTRIAL ENTERPRISES OF UKRAINE

    Directory of Open Access Journals (Sweden)

    Olena Khadzhynova

    2017-12-01

    Full Text Available The purpose of the research is an elaboration of theoretical, methodological, and methodical approaches to forming and developing competitive capacity and investment appeal of steel industry enterprises. The achievement of the given purpose has led to the necessity of formulating such scientific research concept, which bottom line is in the relevance of using modern management methods implemented in foreign manufacturing practices. These are innovative economic, technical, organizational, and corporate methods of managing enterprises with the help of developed systems of managing strategic changes in enterprise activities, the steel industry in particular, which will contribute to achieving the high level of effectiveness and competitiveness of domestic business units. The research methodology is based on the combination of theories of managing economic systems in the globalized market economy. The empirical base for the research consists of the works by domestic and foreign scientists on problems of formation and development of strategic change management systems at industrial enterprises, statistical records, companies’ public records in the Internet, data of international information agencies, Ukrainian legislation on regulating economic activity of enterprises. In carrying out the research, such methods were used as: general academic analysis and synthesis, systemic generalization, statistic and correlation analysis (when justifying the directions of development before carrying out the economic analysis of activities of metallurgical enterprises. There is a conclusion that the industry is concentrated and, consequently, long-term trends are quite predictable, but they require additional clarifications, taking into consideration the uncertainty in the modern state of world economy. It is determined that metallurgy development depends on GBP. The analysis shows that the countries with the high GDP level have quite developed metallurgy. One

  11. The California Central Coast Research Partnership: Building Relationships, Partnerships and Paradigms for University-Industry Research Collaboration

    Science.gov (United States)

    2007-04-26

    thin films. Immobilized MgO nanoparticles in polyelectrolyte thin films of polyethyleneimine and polyacrylic acid have been made and characterized by...and limiting the amount of students in the lab. Potassium Hydroxide (KOH) was studied and characterized for the application of SiO 2 diaphragms due to...Partnerships and Paradigms for University-Industry Research Collaboration. FINAL REPORT ON ONR GRANT NO. N00014-05-1-0855 PERIOD OF PERFORMANCE: June 15

  12. Industrial process gamma tomography. Final report of a coordinated research project 2003-2007

    International Nuclear Information System (INIS)

    2008-05-01

    Gamma computed tomography (CT) is complementary to radiotracer and gamma sealed source techniques largely used for analyzing industrial process units. Relevant target areas for gamma CT applications are generally known. Although the methodology is generic and applicable across broad industrial specimen and facilities, a number of specific items have been identified as the most appropriate target beneficiaries of these applications: distillation columns; packed beds; risers; fluidized beds and other multiphase processing units. These industrial process units present significant technical challenges to CT investigations in terms of the complexity of the multiphase flows that occur in them. In order to address these needs, the IAEA implemented a Coordinated Research Project (CRP) on Industrial Process Gamma Tomography with the overall objective of testing and validating CT techniques for diagnosing industrial multiphase processes. CT laboratories from Argentina, Brazil, Czech Republic, France, Republic of Korea, Malaysia, Norway, Poland, United Kingdom and the United States of America have participated. The specific objectives of the CRP were assessment of the tomographic methods, evaluation of them for investigation of multiphase engineering processes, and design of prototypes of simple CT systems for industrial processing, which can be transferred to other developing countries. The CRP has generated an active network, which also included other groups engaged in the CT field. The round robin test has played an important role in validation of techniques and software. This TECDOC is prepared based on the findings and achievements of the CRP. It is a comprehensive technical report containing valuable information, not readily available in any single publication elsewhere. The participants' reports and software developed by them are compiled in a CD-ROM and attached to the back cover. The guidelines and software packages described in this report can be used as an

  13. Polyfire project- an example of an industrial research project promoting safe industrial production of fire-resistant nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Vaquero, C; Lopez de Ipina, J; Galarza, N [TECNALIA, Leonardo Da Vinci No 11, 01510 Minano (Alava) (Spain); Hargreaves, B; Weager, B [NetComposites Ltd, 4A Broom Business Park, Chesterfield S41 9QG (United Kingdom); Breen, C, E-mail: celinav@leia.es [Materials and Engineering Research Institute, Sheffield Hallam University, Sheffield S1 1WB (United Kingdom)

    2011-07-06

    New developments based on nanotechnology have to guarantee safe products and processes to be accepted by society. The Polyfire project will develop and scale-up techniques for processing halogen-free, fire-retardant nanocomposite materials and coatings based on unsaturated polyester resins and organoclays. The project includes a work package that will assess the Health and Environmental impacts derived from the manipulation of nanoparticles. This work package includes the following tasks: (1) Identification of Health and Environment Impacts derived from the processes, (2) Experimentation to study specific Nanoparticle Emissions, (3) Development of a Risk Management Methodology for the process, and (4) A Comparison of the Health and Environmental Impact of New and Existing Materials. To date, potential exposure scenarios to nanomaterials have been identified through the development of a Preliminary Hazard Analysis (PHA) of the new production processes. In the next step, these scenarios will be studied and simulated to evaluate potential emissions of nanomaterials. Polyfire is a collaborative European project, funded by the European Commission 7th Framework Programme (Grant Agreement No 229220). It features 11 partners from 5 countries (5 SMEs, 3 research institutes, 2 large companies, 1 association) and runs for three years (1st September 2009 - 31st August 2012). This project is an example of an industrial research development which aims to introduce to the market new products promoting the safe use of nanomaterials.

  14. Polyfire project- an example of an industrial research project promoting safe industrial production of fire-resistant nanocomposites

    International Nuclear Information System (INIS)

    Vaquero, C; Lopez de Ipina, J; Galarza, N; Hargreaves, B; Weager, B; Breen, C

    2011-01-01

    New developments based on nanotechnology have to guarantee safe products and processes to be accepted by society. The Polyfire project will develop and scale-up techniques for processing halogen-free, fire-retardant nanocomposite materials and coatings based on unsaturated polyester resins and organoclays. The project includes a work package that will assess the Health and Environmental impacts derived from the manipulation of nanoparticles. This work package includes the following tasks: (1) Identification of Health and Environment Impacts derived from the processes, (2) Experimentation to study specific Nanoparticle Emissions, (3) Development of a Risk Management Methodology for the process, and (4) A Comparison of the Health and Environmental Impact of New and Existing Materials. To date, potential exposure scenarios to nanomaterials have been identified through the development of a Preliminary Hazard Analysis (PHA) of the new production processes. In the next step, these scenarios will be studied and simulated to evaluate potential emissions of nanomaterials. Polyfire is a collaborative European project, funded by the European Commission 7th Framework Programme (Grant Agreement No 229220). It features 11 partners from 5 countries (5 SMEs, 3 research institutes, 2 large companies, 1 association) and runs for three years (1st September 2009 - 31st August 2012). This project is an example of an industrial research development which aims to introduce to the market new products promoting the safe use of nanomaterials.

  15. Status of human factors research program in Central Research Institute of Electric Power Industry

    International Nuclear Information System (INIS)

    Kabetani, Tetsuji

    1989-01-01

    The Human Factors Research Center was established within CRIEPI on July 1, 1987 as its research efforts to reduce human error during operation and maintenance at Japanese nuclear power plants. The Research Program has seven subjects, composed of the original subjects that include the human behavior monitoring method, and the subjects requested by the Federation of Electric Power Companies that include the establishment of techniques of analysing and evaluating information on human error. Some results of the activity are applied in nuclear power plants. We plan to obtain good results to apply to plants, and to improve the results already obtained. (author)

  16. Groundwater Potential

    African Journals Online (AJOL)

    big timmy

    4Department of Geology, Ekiti State University, Ado-Ekiti, Nigeria. Corresponding ... integrated for the classification of the study area into different groundwater potential zones. .... table is mainly controlled by subsurface movement of water into ...

  17. Research on the Mode of Technology Innovation Alliance of the New Material Industry in Hunan Province

    Science.gov (United States)

    Wang, Fan

    2018-03-01

    One of the main directions of technology development in the 21st century is the development and application of new materials, and the key to the development of the new material industry lies in the industrial technology innovation. The gross scale of the new material industry in Hunan Province ranks the first array in China. Based on the present situation of Hunan’s new material industry, three modes of technology innovation alliance are put forward in this paper, namely the government-driven mode, the research-driven and the market-oriented mode. The government-driven mode is applicable to the major technology innovation fields with uncertain market prospect, high risk of innovation and government’s direct or indirect intervention;the research-driven mode is applicable to the key technology innovation fields with a high technology content; and the market-oriented mode is applicable to the general innovation fields in which enterprises have demands for technology innovation but such innovation must be achieved via cooperative research and development.

  18. Patient Outcomes as Transformative Mechanisms to Bring Health Information Technology Industry and Research Informatics Closer Together.

    Science.gov (United States)

    Krive, Jacob

    2015-01-01

    Despite the fast pace of recent innovation within the health information technology and research informatics domains, there remains a large gap between research and academia, while interest in translating research innovations into implementations in the patient care settings is lacking. This is due to absence of common outcomes and performance measurement targets, with health information technology industry employing financial and operational measures and academia focusing on patient outcome concerns. The paper introduces methodology for and roadmap to introduction of common objectives as a way to encourage better collaboration between industry and academia using patient outcomes as a composite measure of demonstrated success from health information systems investments. Along the way, the concept of economics of health informatics, or "infonomics," is introduced to define a new way of mapping future technology investments in accordance with projected clinical impact.

  19. Nuclear and isotopic techniques for the characterization of submarine groundwater discharge in coastal zones. Results of a coordinated research project 2001-2006

    International Nuclear Information System (INIS)

    2007-07-01

    Submarine groundwater discharge (SGD) is now recognized as an important pathway between land and sea. As such, this flow may contribute to the biogeochemical and other marine budgets of nearshore waters. These discharges typically display significant spatial and temporal variability, making direct assessments difficult. Groundwater seepage is patchy, diffuse, temporally variable, and may involve multiple aquifers. Thus, the measurement of its magnitude and associated chemical fluxes is a challenging enterprise. An initiative on SGD characterization was developed by the IAEA and UNESCO in 2000 as a 5-year plan to assess methodologies and importance of SGD for coastal zone management. The IAEA component included a Coordinated Research Project (CRP) on Nuclear and Isotopic Techniques for the Characterization of Submarine Groundwater Discharge (SGD) in Coastal Zones, carried out jointly by the IAEA's Isotope Hydrology Section in Vienna and the Marine Environment Laboratory in Monaco, together with 9 laboratories from 8 countries. In addition to the IAEA, the Intergovernmental Oceanographic Commission (IOC) and the International Hydrological Programme (IHP) have provided support. This overall effort originally grew from a project sponsored by the Scientific Committee on Ocean Research (SCOR) who established a Working Group (112) on SGD. The activities included joint meetings (Vienna 2000, 2002, and 2005; Syracuse, Italy, 2001; and Monaco 2004), sampling expeditions (Australia 2000; Sicily 2001 and 2002; New York 2002; Brazil 2003; and Mauritius 2005), joint analytical work, data evaluation, and preparation of joint publications. The objectives of the CRP included the improvement of capabilities for water resources and environmental management of coastal zones; application of recently developed nuclear and isotopic techniques suitable for quantitative estimation of various components of SGD; understanding of the influence of SGD on coastal processes and on groundwater

  20. Science for Energy Technology: Strengthening the Link Between Basic Research and Industry

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-04-01

    The nation faces two severe challenges that will determine our prosperity for decades to come: assuring clean, secure, and sustainable energy to power our world, and establishing a new foundation for enduring economic and jobs growth. These challenges are linked: the global demand for clean sustainable energy is an unprecedented economic opportunity for creating jobs and exporting energy technology to the developing and developed world. But achieving the tremendous potential of clean energy technology is not easy. In contrast to traditional fossil fuel-based technologies, clean energy technologies are in their infancy, operating far below their potential, with many scientific and technological challenges to overcome. Industry is ultimately the agent for commercializing clean energy technology and for reestablishing the foundation for our economic and jobs growth. For industry to succeed in these challenges, it must overcome many roadblocks and continuously innovate new generations of renewable, sustainable, and low-carbon energy technologies such as solar energy, carbon sequestration, nuclear energy, electricity delivery and efficiency, solid state lighting, batteries and biofuels. The roadblocks to higher performing clean energy technology are not just challenges of engineering design but are also limited by scientific understanding.Innovation relies on contributions from basic research to bridge major gaps in our understanding of the phenomena that limit efficiency, performance, or lifetime of the materials or chemistries of these sustainable energy technologies. Thus, efforts aimed at understanding the scientific issues behind performance limitations can have a real and immediate impact on cost, reliability, and performance of technology, and ultimately a transformative impact on our economy. With its broad research base and unique scientific user facilities, the DOE Office of Basic Energy Sciences (BES) is ideally positioned to address these needs. BES has laid

  1. Education Program for Doctoral Researchers by Industrial-Government-Academic Cooperation and Interaction between Different Research Fields

    Science.gov (United States)

    Oki, Kazuya; Sawaragi, Tetsuo; Hasebe, Shinji; Morisawa, Shinsuke

    New education program to train graduate students and postdoctoral researchers who can be good leaders in a variety of social fields by cooperation of graduate school of engineering and pharmaceutical sciences is conducted as an advanced activity in Kyoto University. This program consists of four sub-programs and the educational effect by the collaboration of industry-government-academic and the interaction between dissimilar research fields is described in this paper. Trainees in this program acquire the ability to understand objectively one’ s research from comprehensive point of view and to debate with researchers in different fields. This program supports them to become ‘Global Leaders’ who play an important role internationally in advanced technology.

  2. A proposed groundwater management framework for municipalities ...

    African Journals Online (AJOL)

    Groundwater is not being perceived as an important water resource and therefore has been given limited attention in South. Africa. This is reflected in general ... Research Commission (WRC) has commissioned a project to develop a Groundwater Management Framework that incorpo- rates all aspects of groundwater ...

  3. Groundwater recharge in the tropics: a pan-African analysis of observations

    Science.gov (United States)

    Taylor, R. G.

    2015-12-01

    Groundwater is a vital source of freshwater in sub-Saharan Africa where rainfall and river discharge are unreliable and per-capita reservoir storage is among the lowest in the world. Groundwater is widely considered a distributed, low-cost and climate-resilient option to meet rapidly growing freshwater demand and alleviate endemic poverty by expanding access to safe water and improving food security through irrigation. Recent research indicates that groundwater storage in Africa is about 100 times greater than annual river discharge yet major uncertainties remain in the magnitude and nature of replenishment through recharge as well as the impacts of land-use and climate change. Here, we present newly compiled, multi-decadal observations of groundwater levels from 5 countries (Benin, Burkina Faso, Niger, Tanzania, Uganda) and paired measurements of stable isotope ratios of O and H in precipitation and groundwater at 11 locations. These data reveal both a distinct bias in groundwater recharge to intensive rainfall and rapid recharge pathways (e.g. focused, macropore flow) that are inconsistent with conventional recharge models assuming pore-matrix flow defined by the Darcy-Richards equation. Further the records highlight the substantial influence of land-use change (e.g. conversion of natural, perennial cover to croplands) on groundwater recharge. The compiled observations also provide, for the first time, a pan-African baseline to evaluate the performance of large-scale hydrological models and Land-Surface Models incorporating groundwater in this region. Our results suggest that the intensification of precipitation brought about by global warming favours groundwater replenishment in sub-Saharan Africa. As such, groundwater may prove to be a climate-resilient source of freshwater in the tropics, enabling adaptive strategies such as groundwater-fed irrigation and sustaining domestic and industrial water supplies.

  4. Undue industry influences that distort healthcare research, strategy, expenditure and practice: a review.

    Science.gov (United States)

    Stamatakis, Emmanuel; Weiler, Richard; Ioannidis, John P A

    2013-05-01

    Expenditure on industry products (mostly drugs and devices) has spiraled over the last 15 years and accounts for substantial part of healthcare expenditure. The enormous financial interests involved in the development and marketing of drugs and devices may have given excessive power to these industries to influence medical research, policy, and practice. Review of the literature and analysis of the multiple pathways through which the industry has directly or indirectly infiltrated the broader healthcare systems. We present the analysis of the industry influences at the following levels: (i) evidence base production, (ii) evidence synthesis, (iii) understanding of safety and harms issues, (iv) cost-effectiveness evaluation, (v) clinical practice guidelines formation, (vi) healthcare professional education, (vii) healthcare practice, (viii) healthcare consumer's decisions. We located abundance of consistent evidence demonstrating that the industry has created means to intervene in all steps of the processes that determine healthcare research, strategy, expenditure, practice and education. As a result of these interferences, the benefits of drugs and other products are often exaggerated and their potential harms are downplayed, and clinical guidelines, medical practice, and healthcare expenditure decisions are biased. To serve its interests, the industry masterfully influences evidence base production, evidence synthesis, understanding of harms issues, cost-effectiveness evaluations, clinical practice guidelines and healthcare professional education and also exerts direct influences on professional decisions and health consumers. There is an urgent need for regulation and other action towards redefining the mission of medicine towards a more objective and patient-, population- and society-benefit direction that is free from conflict of interests. © 2013 Stichting European Society for Clinical Investigation Journal Foundation. Published by Blackwell Publishing Ltd.

  5. Research and design of the moving system for the cobalt-60 industrial irradiator

    International Nuclear Information System (INIS)

    Le Minh Tuan; Tran Khac An; Cao Van Chung; Phan Phuoc Thang

    2016-01-01

    On the way of localization of Cobalt-60 industrial irradiators, Research and Development Center for Radiation Technology (VINAGAMMA) has successfully designed and manufactured the first version of Co-60 industrial irradiator, VINAGA1. The second version of Co-60 industrial irradiator has been studied and designed by VINAGAMMA in the frame of the scientific project No. DTCB.02/15/TTNCTK. The nucleus of a Co-60 industrial irradiator is a mechanical system inside an irradiation room namely a tote box moving system. This report presents the tote box moving system designed by VINAGAMMA. The tote box moving system contains 52 tote boxes with the dimensions of 50 cm (w) × 70 cm (l) × 150 cm (h) that are moving around the source racks in the manner of 4 passes and 2 levels. The irradiator with this tote box moving system has good specifications: The minimum time of an irradiation cycle is 1h 20 min and the dose uniformity ratio (DUR) at the product densities of 0.1 g/cm 3 and 0.5 g/cm 3 is 1.4 and 1.8, respectively. Radiation energy utilization efficiency at the product densities of 0.1 g/cm 3 and 0.5 g/cm 3 is 19.7% and 48.8%, respectively. These specifications meet the requirements for a multi-purpose Co-60 industrial irradiator and the present irradiation requirements in Vietnam. (author)

  6. Research and design of the moving system for the cobalt-60 industrial irradiator VINAGA2

    International Nuclear Information System (INIS)

    Le Minh Tuan; Tran Khac An; Nguyen Ngoc Phuong; Tran Van Hung; Cao Van Chung; Phan Phuoc Thang; Ha Thanh Viet; Nguyen Thanh Cuong; Nguyen Duc Hoa

    2017-01-01

    On the way of localization of Cobalt-60 industrial irradiators, Research and Development Center for Radiation Technology (VINAGAMMA) has successfully designed and manufactured the first version of Co-60 industrial irradiator, VINAGA1. The second version of Co-60 industrial irradiator has been studied and designed by VINAGAMMA in the frame of the scientific project No. DTCB.02/15/TTNCTK. The main system of a Co-60 industrial irradiator is a mechanical system inside an irradiation room namely a tote box moving system. This report presents the tote box moving system of VINAGA2 designed by VINAGAMMA. The tote box moving system contains 52 tote boxes with the dimensions of 50 cm (w) × 70 cm (l) × 150 cm (h) that are moving around the source racks in the manner of 4 passes and 2 levels. The irradiator VINAGA2 with this tote box moving system has good specifications: The minimum time of an irradiation cycle is 1 h 20 min. and the dose uniformity ratio (DUR) at the product densities of 0.1 g/cm 3 and 0.5 g/cm 3 is 1.4 and 1.8, respectively. Radiation energy utilization efficiency at the product densities of 0.1 g/cm 3 and 0.5 g/cm 3 is 19.7% and 48.8%, respectively. These specifications meet the requirements for a multi-purpose Co-60 industrial irradiator and the present irradiation requirements in Vietnam. (author)

  7. The metalcasting industry and future research on the International Space Station

    International Nuclear Information System (INIS)

    Santner, Joe; Overfelt, Tony

    2000-01-01

    Fourteen million tons of castings are used annually in ninety percent of all manufactured goods and in all manufacturing machinery making metalcasting the manufacturing backbone of America. There are approximately 3,000 foundries located in 49 states directly providing employment to 200,000 people and indirectly supporting transportation, petrochemical, construction, and other end-user industries. The Solidification Design Center (SDC) began a pioneering effort to address metalcasting industry technical needs to maintain US global leadership in quality, price, and delivery. While individual companies have interacted in the past with the Auburn University SDC, eighty-percent of the foundries employ less than 100 individuals while only six-percent of the foundries employ more than 250 persons. The American Foundrymen's Society (AFS) formed the Solidification Design and Control Consortium to reach the small businesses in the U.S. metalcasting industry. Over a century of operation has proved the AFS committee structure to be a robust management tool. The recognized metalcasting industry technical needs and the unique opportunities that low earth orbit offers foundry process research are described in the present paper. In addition, the metalcasting approach to prioritize proposals, transfer technology developed within the small business community, and the metalcasting industry concerns regarding working with a government aerospace program are also discussed

  8. Implementation of Responsible Research and Innovation (RRI Practices in Industry: Providing the Right Incentives

    Directory of Open Access Journals (Sweden)

    Agata Gurzawska

    2017-09-01

    Full Text Available Abstract: Responsible Research and Innovation (RRI is a term used by policy-makers and academics to refer to research and innovation that is ethically acceptable and socially desirable. Despite the fact that the vast majority of research and innovation (R&I is funded and produced by industry, companies tend to have no awareness or recognition of this concept. This is unfortunate, as the RRI paradigm could be mutually beneficial for both business and society: it could help businesses realise competitive opportunities while also leading to positive economic, societal and environmental impacts. This paper investigates how industry can be incentivised to engage in research and innovation following the approach of RRI. We propose a matrix of incentives for stimulating the adoption of RRI. We categorise incentives according to three dichotomies: external and internal, instrumental and non-instrumental, direct and indirect. The incentives are formalised in a causal loop diagram, which can be used to demonstrate the sound character of investing in RRI from a business perspective. We discuss examples of incentives, including corporate reputation and critical consumerism, certification, employee engagement, and governance. Lastly, to ensure effective implementation of RRI, we outline factors for the realisation of successful incentives for RRI in industry.

  9. Defense, basic, and industrial research at the Los Alamos Neutron Science Center: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Longshore, A.; Salgado, K. [comps.

    1995-10-01

    The Workshop on Defense, Basic, and Industrial Research at the Los Alamos Neutron Science Center gathered scientists from Department of Energy national laboratories, other federal institutions, universities, and industry to discuss the use of neutrons in science-based stockpile stewardship, The workshop began with presentations by government officials, senior representatives from the three weapons laboratories, and scientific opinion leaders. Workshop participants then met in breakout sessions on the following topics: materials science and engineering; polymers, complex fluids, and biomaterials; fundamental neutron physics; applied nuclear physics; condensed matter physics and chemistry; and nuclear weapons research. They concluded that neutrons can play an essential role in science-based stockpile stewardship and that there is overlap and synergy between defense and other uses of neutrons in basic, applied, and industrial research from which defense and civilian research can benefit. This proceedings is a collection of talks and papers from the plenary, technical, and breakout session presentations. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  10. Review of Researches on Agricultural Industry Chain at Home and Abroad

    Institute of Scientific and Technical Information of China (English)

    Ge; SONG; Taiyan; YANG; Jianhui; LIU

    2014-01-01

    Management of agricultural industry chain is the main form of modern agricultural industrialization. Integration and optimization of agricultural chain have great significance in deepening the reform in the countryside,quickening the development of agricultural modernization and establishing new system of agricultural management. Based on the theory sources and contents of agricultural chain as well as the current researches at home and abroad,this paper hackles and concludes information technology,logistics management and food safety and quality in foreign agricultural chain as well as the organization model,operation mechanism,integration and optimization,promotion and extension,financing and risk prevention,influencing factors as well as performance evaluation in domestic agricultural chain and offers relevant review in order to provide further reference for future researches.

  11. AICD -- Advanced Industrial Concepts Division Biological and Chemical Technologies Research Program. 1993 Annual summary report

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, G.; Bair, K.; Ross, J. [eds.

    1994-03-01

    The annual summary report presents the fiscal year (FY) 1993 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1993 (ASR 93) contains the following: A program description (including BCTR program mission statement, historical background, relevance, goals and objectives), program structure and organization, selected technical and programmatic highlights for 1993, detailed descriptions of individual projects, a listing of program output, including a bibliography of published work, patents, and awards arising from work supported by BCTR.

  12. AN EXPLORATORY RESEARCH REGARDING CUSTOMER ORIENTATION AND PERFORMANCE IN HOSPITALITY INDUSTRY

    Directory of Open Access Journals (Sweden)

    FLAVIA DANA OLTEAN

    2013-08-01

    Full Text Available The main objective of this research is to present the importance of the customer orientation from themanagerial perspective and to analyze the influence of customer orientation over the performance indicators in thehotels from Mures county (Romania . For achieving this objective, the data have been collected by means of 42surveys addressed to managers and owners who are active in the industry of hospitability, and the results indicated apartial confirmation of the tested hypotheses and the results from previous international research. The conclusions ofthe study present importance for the decisional authorities associated with hotel units which desire to achieve thesatisfaction of the customers, gaining the brand loyalty and implicitly the desired economic efficiency and add to theinternational literature aspects referring to the industry of hospitality from Romania.

  13. Recommendations for the safe use and regulation of radiation sources in industry, medicine, research and teaching

    International Nuclear Information System (INIS)

    1990-01-01

    The use of radiation sources of various types and activities is widespread in industry, medicine, research and teaching, and is increasing yearly. The safety record has been admirable, although incidents have occurred where loss of control of radiation sources has given rise to unplanned exposures to workers, medical patients and members of the public, sometimes with fatal results, while in other situations exposure may not have been as low as reasonably achievable. This publication is intended as a practical aid for all concerned with operational radiation protection connected with the use of radiation sources in industry, medicine, research and teaching, from the point of view of both the user of such sources and the regulatory bodies. Refs, figs

  14. Impacts of teachers’ competency on job performance in research universities with industry characteristics: Taking academic atmosphere as moderator

    Directory of Open Access Journals (Sweden)

    Anguo Xu

    2014-10-01

    Full Text Available Purpose: Research universities with industry characteristics play an irreplaceable role in national economic development and social development. With the rapid development of research universities with industry characteristics in China, these universities face new challenges in managing teachers and promoting their quality. This paper aims to examine the impact of teachers’ competency on job performance in research university with industry characteristics Design/methodology/approach: Based on the behavioral event interview and questionnaire methods, a four-dimension (i.e. basic quality, teaching ability, industry awareness and research capacity competency model was proposed, the influence mechanism of competency on job performance was examined using empirical research. Findings: We found that there is a significant positive correlation between the teachers’ competency level, four dimensions and job performance in research universities with industry characteristics, especially between research capacity, teaching ability, industry awareness and job performance. And academic atmosphere plays a regulatory role in the interaction between the competency and job performance. Practical implications: Our findings can help to improve the management level of teachers in research universities with industry characteristics.Originality/value: The paper introduces the competency theory to the teacher management in research universities with industry characteristics, and gives some interesting findings.

  15. Identifying research advancements in supply chain risk management for Agri-food Industries: Literature review

    Science.gov (United States)

    Septiani, W.; Astuti, P.

    2017-12-01

    Agri-food supply chain has different characteristics related to the raw materials it uses. Food supply chain has a high risk of damage, thus drawing a lot of attention from researchers in supply chain management. This research aimed to investigate the development of supply chain risk management research on agri-food industries. These reviews were arranged in steps systematically, ranging from searching related to the review of SCRM paper, reviewing the general framework of SCRM and the framework of agri-food SCRM. Selection of literature review papers in the period 2005-2017, and obtained 45 papers. The results of the identification research were illustrated in a supply chain risk management framework model. This provided insight toward future research directions and needs.

  16. Structural fire resistance experimental research priority needs of U.S. industry

    CERN Document Server

    Almand, Kathleen H

    2012-01-01

    Structural Fire Resistance Experimental Research – Priority Needs of U.S. Industry provides a synthesis of stakeholder input to a prioritized agenda for research at the National Fire Research Laboratory (NFRL) at the National Institute of Standards and Technology (NIST) designed to accelerate the implementation of performance-based fire engineering for structures. The NFRL presents a broad range of unanswered questions regarding the performance of real structures in fire conditions, and informs performance-based design methods and standards in this field. The authors conducted a comprehensive literature review of large-scale structural fire testing and compiled research needs from a variety of sources. The book addresses major issues of broad concern in the fire community, such as real fire exposure and structural response, composite floor system performance, enhancing modeling performance, and understanding the embedded safety features in design methods. It concludes with a prioritized set of research reco...

  17. Review of job shop scheduling research and its new perspectives under Industry 4.0

    OpenAIRE

    Zhang, Jian; Ding, Guofu; Zou, Yisheng; Qin, Sheng-feng; Fu, Jianlin

    2017-01-01

    Traditional job shop scheduling is concentrated on centralized scheduling or semi-distributed scheduling. Under the Industry 4.0, the scheduling should deal with a smart and distributed manufacturing system supported by novel and emerging manufacturing technologies such as mass customization, Cyber-Physics Systems, Digital Twin, and SMAC (Social, Mobile, Analytics, Cloud). The scheduling research needs to shift its focus to smart distributed scheduling modeling and optimization. In order to t...

  18. Progress on management business system of LLW generated from research and industrial nuclear facilities

    International Nuclear Information System (INIS)

    Izumida, Tatsuo

    2014-01-01

    RANDEC has been studying a management business system of LLW (Low Level Waste) generated from research and industrial facilities since 2008. To examine economical problems, the income and expenditure of LLW treatment business was simulated. As a result, raising method of the funds which is required in preparatory stage of LLW treatment business is an obvious issue to carry out as public utility works. (author)

  19. Industrial research on the quality of brake shoes meant for rolling stock

    Science.gov (United States)

    Popa, E.; Pascu, L.; Socalici, A.; Lascufoni, A.

    2016-02-01

    Brake shoes wear appears as a normal exploitation process and depends both on the braking force and on the material the shoe is made of. Brake shoes are made of molded sulfurous cast iron. The industrial research and experiments aim at determining the specific characteristics of the phosphorous cast iron (chemical and structural homogeneity, hardness) and their optimization in view of improving the quality of the brake shoes meant for the rolling stock

  20. Determination of Rn concentration in groundwater

    International Nuclear Information System (INIS)

    Takada, Shigeru; Handa, Madoka; Okano, Yasuhiro; Saito, Masaaki; Suzuki, Takashi

    1984-01-01

    The method of prediction of earthquakes by the change of concentration of Rn in groundwater was developed by U.S.S.R. and People's Republic of China, and was not known clearly. Since 1975, the research works on this subject were commenced by University of Tokyo, Geological Survey of Agency of Industrial Science and Technology and Tokyo Metropolitan Isotopic Research Center. Along with the development of an automatic continuous measuring apparatus with high reliability, the systems for the measurement of the Rn concentration in groundwater were established. At the time of the earthquake off Izu-Oshima on January 14, 1978, clear precursor was found in an artesian flowing well in Nakaizu 0f Izu Peninsula, and the unusual phenomena which seemed be the precursor of an earthquake were recognized in other districts of Izu and Tokai. On August 8, 1983, an earthquake of magnitude 6 occurred in the boundary region of Yamanashi and Kanagawa Prefectures. Preceding the earthquake, the unusual change of the concentration of Rn was recognized at several observation wells in Tokyo, and the unusual change was observed after the earthquake also. The possibility that the unusual change of the Rn concentration in groundwater is the precursor of earthquakes is high, and this phenomenon is expected to make contribution for the prediction of earthquakes, though there remain many problems to be solved. Further works are scheduled to establish the practical method of predicting earthquakes. (Isimitsu, A.)

  1. In situ groundwater bioremediation

    Energy Technology Data Exchange (ETDEWEB)

    Hazen, Terry C.

    2009-02-01

    In situ groundwater bioremediation of hydrocarbons has been used for more than 40 years. Most strategies involve biostimulation; however, recently bioaugmentation have been used for dehalorespiration. Aquifer and contaminant profiles are critical to determining the feasibility and strategy for in situ groundwater bioremediation. Hydraulic conductivity and redox conditions, including concentrations of terminal electron acceptors are critical to determine the feasibility and strategy for potential bioremediation applications. Conceptual models followed by characterization and subsequent numerical models are critical for efficient and cost effective bioremediation. Critical research needs in this area include better modeling and integration of remediation strategies with natural attenuation.

  2. Isotope hydrology: Investigating groundwater contamination

    International Nuclear Information System (INIS)

    Dubinchuk, V.; Froehlich, K.; Gonfiantini, R.

    1989-01-01

    Groundwater quality has worsened in many regions, with sometimes serious consequences. Decontaminating groundwater is an extremely slow process, and sometimes impossible, because of the generally long residence time of the water in most geological formations. Major causes of contamination are poor groundwater management (often dictated by immediate social needs) and the lack of regulations and control over the use and disposal of contaminants. These types of problems have prompted an increasing demand for investigations directed at gaining insight into the behaviour of contaminants in the hydrological cycle. Major objectives are to prevent pollution and degradation of groundwater resources, or, if contamination already has occurred, to identify its origin so that remedies can be proposed. Environmental isotopes have proved to be a powerful tool for groundwater pollution studies. The IAEA has had a co-ordinated research programme since 1987 on the application of nuclear techniques to determine the transport of contaminants in groundwater. An isotope hydrology project is being launched within the framework of the IAEA's regional co-operative programme in Latin America (known as ARCAL). Main objectives are the application of environmental isotopes to problems of groundwater assessment and contamination in Latin America. In 1989, another co-ordinated research programme is planned under which isotopic and other tracers will be used for the validation of mathematical models in groundwater transport studies

  3. The competent person in radiation protection: practical radiation protection for industry and research - unsealed sources

    International Nuclear Information System (INIS)

    Bruchet, H.

    2009-01-01

    The mission of the competent person in radiation protection has been broadly developed these last years to take an essential function in firm:study of working place, delimitation of regulated areas, monitoring of exposure, relations with authorities. The competent person in radiation protection must follow a training, defined by decree and shared in two parts: a theoretical part used as compulsory subjects and a practical part specific to the different sectors of activity (research, industry, medical centers, nuclear facilities) as well as the radiation use type. This volume corresponds to the practical module devoted to the industrial and research facilities concerned by the possession of management of sealed or unsealed sources. In accordance with the regulations stipulating that this module must allow to apply the theoretical knowledge to concrete situations in work. It includes eight chapters as following: radiation protection in industrial and research facilities, use of sources and associated risks, fitting out professional premises, evaluation of exposure, control of radiation protection; use of detection equipment and radioactive contamination and exposure measurement equipment, associated to methods and calculation tools; radioactive waste management; accidental or damaged situations management; methodology of working place analysis completed by the application to practical cases found in laboratories. (N.C.)

  4. Association between Local Illumination and Visual Fatigue among the Research and Development Staffs of Industry

    Directory of Open Access Journals (Sweden)

    A.R. Mashkoori

    2016-12-01

    Full Text Available Abstract Aims: Work proper lighting means a safe, healthy and comfort conditions for work under a lighting system that includes qualitative and quantitative features. This study aimed to evaluate the surface local lighting of works and eye fatigue among research and development staffs of an automotive industry. Instrument & Methods: In this descriptive study in Research and Development Department of an automotive industry in 2015, 126 official staffs were selected randomly. A demographic questionnaire and the Visual Fatigue Questionnaire (Persian Version were used for data gathering. Hagner EC1 Luxmeter was used to measure the local lighting. Data were analyzed by SPSS 20 software, through descriptive statistics. Findings: The lighting in 382 stations (75.8% was improper and less than standard. The minimum and maximum intensity of light was between 22.4lux in station 2 (inventory department and 581lux in station 4 (systems and methods department. The overall intensity in more than 50% units, except the Systems and Methods Department, were less than the standard (300lux. 40.4% of the participants had severe eye fatigue, 28.6% had moderate visual fatigue, 28.6% had low visual fatigue and only 2.4% had no visual fatigue. The average of visual fatigue was 3.50±1.97. Conclusion: The workplace lighting and the eye fatigue of computer users in the Research and Development Department of the studied automotive industry are not in an acceptable condition.

  5. [Health-related scientific and technological capabilities and university-industry research collaboration].

    Science.gov (United States)

    Britto, Jorge; Vargas, Marco Antônio; Gadelha, Carlos Augusto Grabois; Costa, Laís Silveira

    2012-12-01

    To examine recent developments in health-related scientific capabilities, the impact of lines of incentives on reducing regional scientific imbalances, and university-industry research collaboration in Brazil. Data were obtained from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (Brazilian National Council for Scientific and Technological Development) databases for the years 2000 to 2010. There were assessed indicators of resource mobilization, research network structuring, and knowledge transfer between science and industry initiatives. Based on the regional distribution map of health-related scientific and technological capabilities there were identified patterns of scientific capabilities and science-industry collaboration. There was relative spatial deconcentration of health research groups and more than 6% of them worked in six areas of knowledge areas: medicine, collective health, dentistry, veterinary medicine, ecology and physical education. Lines of incentives that were adopted from 2000 to 2009 contributed to reducing regional scientific imbalances and improving preexisting capabilities or, alternatively, encouraging spatial decentralization of these capabilities. Health-related scientific and technological capabilities remain highly spatially concentrated in Brazil and incentive policies have contributed to reduce to some extent these imbalances.

  6. Hexavalent Chromium: Analysis of the Mechanism of Groundwater Contamination in a Former Industrial Site in the Province of Vicenza (Northern Italy)

    OpenAIRE

    Valentina Accoto; Pierluigi Bullo; Ruben Faccio; Leonardo Mason; Andrea Sottani

    2017-01-01

    The study consisted in the analysis of the mobilization mechanisms of hexavalent chromium (Cr(VI)) into groundwater from a decommissioned contaminated factory. The site is located in the Province of Vicenza and formerly was a chrome-plating plant. The subsoil consists predominantly of gravelly deposits with a thickness of at least one hundred meters. An unconfined aquifer is present with water table at about 23 m depth bgl. During the seven years of monitoring (2008-2014), the fluctuation of ...

  7. Report on the actual state of the basic, applied research and industrial applications of the radiation in Mexico

    International Nuclear Information System (INIS)

    Lopez V, H.

    1991-07-01

    In this report the main works of basic, applied research and industrial applications that are carried out in Mexico, about radiations (radiation chemistry, technology, applications, use and isotope production, etc.): infrastructure, radiation sources, groups and research programs are presented. (Author)

  8. Plunkett's E-Commerce & Internet Business Almanac 2012 E-Commerce & Internet Business Industry Market Research, Statistics, Trends & Leading Companies

    CERN Document Server

    Plunkett, Jack W

    2012-01-01

    Market research guide to the e-commerce and Internet business-a tool for strategic planning, competitive intelligence, employment searches or financial research. Contains trends analysis, globalization, trade, statistical tables and an industry glossary. Includes our profiles of nearly 450 top e-commerce and internet industry firms, featuring addresses, phone numbers and executive names.

  9. Inattentional blindness: present knowledge, recent research and implications for the nuclear industry

    International Nuclear Information System (INIS)

    Budau, J.

    2011-01-01

    Inattentional blindness can occur when our attention has been assigned to a primary task and not enough attentional resources are left to detect what can be a very important unexpected event. This unexpected event is often something that would be detected under normal conditions. Recent research has shown that perceptual load, and qualities of the unexpected stimulus can impact the occurrence of inattentional blindness. As the nuclear industry has situations of high perceptual load, consideration should be given to the implications of this research. (author)

  10. Inattentional blindness: present knowledge, recent research and implications for the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Budau, J. [Bruce Power, Tiverton, Ontario (Canada)

    2011-09-15

    Inattentional blindness can occur when our attention has been assigned to a primary task and not enough attentional resources are left to detect what can be a very important unexpected event. This unexpected event is often something that would be detected under normal conditions. Recent research has shown that perceptual load, and qualities of the unexpected stimulus can impact the occurrence of inattentional blindness. As the nuclear industry has situations of high perceptual load, consideration should be given to the implications of this research. (author)

  11. Inattentional blindness: present knowledge, recent research and implications for the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Budau, J. [Bruce Power, Tiverton, Ontario (Canada)

    2011-07-01

    Inattentional blindness can occur when our attention has been assigned to a primary task and not enough attentional resources are left to detect what can be a very important unexpected event. This unexpected event is often something that would be detected under normal conditions. Recent research has shown that perceptual load, and qualities of the unexpected stimulus can impact the occurrence of inattentional blindness. As the nuclear industry has situations of high perceptual load, consideration should be given to the implications of this research. (author)

  12. Research of power fuel low-temperature vortex combustion in industrial boiler based on numerical modelling

    Directory of Open Access Journals (Sweden)

    Orlova K.Y.

    2017-01-01

    Full Text Available The goal of the presented research is to perform numerical modelling of fuel low-temperature vortex combustion in once-through industrial steam boiler. Full size and scaled-down furnace model created with FIRE 3D software and was used for the research. All geometrical features were observed. The baseline information for the low-temperature vortex furnace process are velocity and temperature of low, upper and burner blast, air-fuel ratio, fuel consumption, coal dust size range. The obtained results are: temperature and velocity three dimensional fields, furnace gases and solid fuel ash particles concentration.

  13. Nuclear techniques in the coal industry. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    With the aim of promoting advanced research and facilitating a more extensive application of nuclear techniques for environmental protection in the exploration and exploitation of coal, the IAEA established the present co-ordinated research programme (CRP) in 1989. This report includes an assessment of the current status and trends in nuclear techniques in the coal industry and the results obtained by the participants at the CRP. Proceedings of the final CRP on ``Nuclear Techniques in Exploration and Exploitation of Coal: On-line and Bulk Analysis and Evaluation of Potential Environmental Pollutants in Coal and Coke``, was held in Krakow, Poland, from 9 to 12 May 1994. Refs, figs, tabs.

  14. Water use and groundwater contamination

    International Nuclear Information System (INIS)

    Elton, J.J.; Livingstone, B.

    1998-01-01

    A general review of the groundwater resources in Saskatchewan and their vulnerability to contamination was provided. In particular, the use of water and the effects on water by the oil and gas industry in Saskatchewan were discussed. It was suggested that public concerns over scarcity and contamination of water are gradually changing perceptions about Canada's abundance of water. Saskatchewan's surface water covers 12 per cent of the province. About 90 per cent of the rural populations and 80 per cent of municipalities depend on groundwater supplies. Regulations affecting oil and gas operations that could affect water resources have become more stringent. Techniques used in the detection and monitoring of groundwater affected by salt and petroleum hydrocarbons were described. Electromagnetic surveys are used in detecting salt-affected soils and groundwater. Laboratory analysis of chloride concentrations are needed to define actual chloride concentrations in groundwater. Wells and barriers can be installed to control and recover chloride plumes. Deep well injection and reverse osmosis are other methods, but there is no cheap or simple treatment or disposal method for salt-impacted groundwater. Spills or leaks of petroleum hydrocarbons from various sources can also lead to contamination of groundwater. Various assessment and remediation methods are described. Although there is no scarcity of techniques, all of them are difficult, costly, and may take several years to complete. 11 refs., 1 tab

  15. Alcohol industry influence on UK alcohol policy: A new research agenda for public health.

    Science.gov (United States)

    Hawkins, Benjamin; Holden, Chris; McCambridge, Jim

    2012-09-01

    The British government has been criticised for according industry interests too much weight in alcohol policy-making. Consequently, it has been argued that alcohol strategy in the UK is built around policies for which the evidence base is weak. This has clear implications for public health. The purpose of this commentary is to map recent developments in UK alcohol policy and related debates within the alcohol policy literature, thus laying the foundations for a systematic examination of the influence of the alcohol industry on alcohol policy. It highlights the changing structure of the industry and summarises what is known about the positions and strategies of industry actors towards alcohol policy. In so doing, it aims to contribute not just to debates about alcohol policy, but to a broader understanding of health policy processes and the relationships between government and other stakeholders. It advances a new research agenda focused on the role of corporate actors in the field of alcohol policy and public health more broadly.

  16. Tobacco industry globalization and global health governance: towards an interdisciplinary research agenda

    Science.gov (United States)

    Lee, Kelley; Eckhardt, Jappe; Holden, Chris

    2016-01-01

    Shifting patterns of tobacco production and consumption, and the resultant disease burden worldwide since the late twentieth century, prompted efforts to strengthen global health governance through adoption of the Framework Convention on Tobacco Control. While the treaty is rightfully considered an important achievement, to address a neglected public health issue through collective action, evidence suggests that tobacco industry globalization continues apace. In this article, we provide a systematic review of the public health literature and reveal definitional and measurement imprecision, ahistorical timeframes, transnational tobacco companies and the state as the primary units and levels of analysis, and a strong emphasis on agency as opposed to structural power. Drawing on the study of globalization in international political economy and business studies, we identify opportunities to expand analysis along each of these dimensions. We conclude that this expanded and interdisciplinary research agenda provides the potential for fuller understanding of the dual and dynamic relationship between the tobacco industry and globalization. Deeper analysis of how the industry has adapted to globalization over time, as well as how the industry has influenced the nature and trajectory of globalization, is essential for building effective global governance responses. This article is published as part of a thematic collection dedicated to global governance. PMID:28458910

  17. Tobacco industry globalization and global health governance: towards an interdisciplinary research agenda.

    Science.gov (United States)

    Lee, Kelley; Eckhardt, Jappe; Holden, Chris

    2016-01-01

    Shifting patterns of tobacco production and consumption, and the resultant disease burden worldwide since the late twentieth century, prompted efforts to strengthen global health governance through adoption of the Framework Convention on Tobacco Control. While the treaty is rightfully considered an important achievement, to address a neglected public health issue through collective action, evidence suggests that tobacco industry globalization continues apace. In this article, we provide a systematic review of the public health literature and reveal definitional and measurement imprecision, ahistorical timeframes, transnational tobacco companies and the state as the primary units and levels of analysis, and a strong emphasis on agency as opposed to structural power. Drawing on the study of globalization in international political economy and business studies, we identify opportunities to expand analysis along each of these dimensions. We conclude that this expanded and interdisciplinary research agenda provides the potential for fuller understanding of the dual and dynamic relationship between the tobacco industry and globalization. Deeper analysis of how the industry has adapted to globalization over time, as well as how the industry has influenced the nature and trajectory of globalization, is essential for building effective global governance responses. This article is published as part of a thematic collection dedicated to global governance.

  18. Using tobacco-industry marketing research to design more effective tobacco-control campaigns.

    Science.gov (United States)

    Ling, Pamela M; Glantz, Stanton A

    2002-06-12

    To improve tobacco-control efforts by applying tobacco-industry marketing research and strategies to clinical and public health smoking interventions, we analyzed previously secret tobacco-industry marketing documents. In contrast to public health, the tobacco industry divides markets and defines targets according to consumer attitudes, aspirations, activities, and lifestyles. Tobacco marketing targets smokers of all ages; young adults are particularly important. During the 1980s, cost affected increasing numbers of young and older smokers. During the 1990s, eroding social acceptability of smoking emerged as a major threat, largely from increasing awareness of the dangers of secondhand smoke among nonsmokers and smokers. Physicians and public health professionals should use tobacco-industry psychographic approaches to design more relevant tobacco-control interventions. Efforts to counter tobacco marketing campaigns should include people of all ages, particularly young adults, rather than concentrating on teens and young children. Many young smokers are cost sensitive. Tobacco-control messages emphasizing the dangers of secondhand smoke to smokers and nonsmokers undermine the social acceptability of smoking.

  19. INDUSTRY-UNIVERSITY COLLABORATION FROM THE POINT OF VIEW OF COMPANIES AS RESEARCH CUSTOMERS

    DEFF Research Database (Denmark)

    Gerstlberger, Wolfgang; Kesting, Tobias

    With regard to the increasing competitive situation in many industries due to continuous globalisation, companies more and more have to take into account external research support in order to maintain or even improve their competitiveness. In order to gain new and more detailed insights...... provide the core for a proposed segmentation framework concept for universities as suppliers on research markets. Following this idea, combined with the theoretical framework of market segmentation and transferring the customer segmentation approach to research markets, our paper gives concrete managerial...... into the actual experiences and perceived benefits of companies cooperating with universities and other external research institutions concerning particularly innovation-related support like product or prototype development, we conducted a transnational empirical survey in 2009. It addressed companies from...

  20. Implications of Tobacco Industry Research on Packaging Colors for Designing Health Warning Labels.

    Science.gov (United States)

    Lempert, Lauren K; Glantz, Stanton A

    2016-09-01

    Health warning labels (HWLs) are an important way to educate the public about the dangers of tobacco products. Tobacco companies conducted research to understand how pack colors affect consumers' perceptions of the products and make packages and their labeling more visually prominent. We analyzed previously secret tobacco industry documents concerning the tobacco industry's internal research on how cigarette package colors and design influence the visual prominence of packages and consumers' perceptions of the harmfulness of the products. The companies found that black is visually prominent, placing dark pack elements on a contrasting light background makes them stand out more, and black text on a white background is more prominent than white text on a black background. Yellow most quickly and effectively seizes and holds consumers' attention and signals warning or danger, while white connotes health and safety. Using black text on a bright contrasting background color, particularly yellow, attracts consumers' attention to the message. Tobacco industry research on pack color choices that make pack elements more prominent, attract and keep consumers' attention, and convey danger instead of health should guide governments in specifying requirements for HWLs. These factors suggest that HWLs printed on a yellow background with black lettering and borders would most effectively seize and keep consumers' attention and signal the danger of cigarettes and other tobacco products. Tobacco companies' internal research on improving the prominence of pack elements suggests that HWLs using black lettering on a contrasting yellow background would most effectively seize and hold consumers' attention and signal the danger of cigarettes and other tobacco products. © The Author 2016. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  1. Groundwater Vulnerability Regions of Iowa

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — The regions onThis map represent areas with similar hydrogeologic characteristics thought to represent similar potentials for contamination of groundwater and/or...

  2. Basic research and industrialization of CANDU advanced fuel - A research for the improvement of RFSP code

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chang Hyo; Jang, Chang Sun; Han, Tae Young [Seoul National University, Seoul (Korea)

    2000-03-01

    The objective of this project is to improve the RFSP code by adopting three dimensional two neutron energy group model and accelerated iterative solution scheme (FDM3D) to 2 group diffusion equations as well. The major contents of this research are the derivation of the finite difference equation to three dimensional two neutron energy group diffusion equation, application of accelerated iterative solution scheme to the finite difference diffusion equation and validation of the improved RFSP code (FDM3D) through benchmark tests. We have shown that SOR/Chebyshev two parameter method and BICG-STAB/Wielandt method are more effective than that of RFSP in terms of computing speed. SOR/Chebyshev two parameter method shows better efficiency than BICG-STAB/Wielandt method. Because calculation efficiency of the latter depends on the right choice of pre-conditioner, however, it is considered that more studies are necessary to improve the efficiency of this latter method and to validate it. We have incorporated the new efficient method into the existing RFSP so that the resulting RFSP becomes much faster and more accurate. RFSP currently uses POWDERPUFS code as main lattice code, which is adequate to the neutron energy group model of RFSP. Because of this, we can not make the full advantage of advanced RFSP without adopting lattice code WIMS-AECL which can generate exact two neutron energy group constants. Therefore, we suggest developing a new CANDU design and analysis code which incorporate WIMS-AECL into FDM3D. 16 refs., 10 figs., 23 tabs. (Author)

  3. Derivative Process Model of Development Power in Industry: Empirical Research and Forecast for Chinese Software Industry and US Economy

    OpenAIRE

    Feng Dai; Bao- hua Sun; Jie Sun

    2004-01-01

    Based on concept and theory of Development Power [1], this paper analyzes the transferability and the diffusibility of industrial development power, points out that the chaos is the extreme of DP releasing and order is the highest degree of DP accumulating, puts forward A-C strength, the index of adjusting and controlling strength, and sets up the derivative process model for industrial development power on the Partial Distribution [2]-[4]. By the derivative process model, a kind of time seri...

  4. TELEMAN - an European community research and development programme on robotics in the nuclear industry

    International Nuclear Information System (INIS)

    Tolley, B.; Robertson, B.

    1991-01-01

    The TELEMAN Programme is a five year cost-shared research programme covering remote handling in hazardous and disordered nuclear environments. It is supported within the current research and development of the European Communities. TELEMAN's strategic objective is to develop advanced teleoperators that respond to the needs of the nuclear industry. Its technical objective is to strengthen the scientific and engineering bases upon which the design of teleoperators for use throughout the nuclear industry rests. This will be done by providing new solutions to problems of manipulation, material transport and mobile surveillance in nuclear environments and by demonstrating their feasibility. Motivation for such a programme lies in the potential teleoperators have to improve the separation of workers from radioactive equipment. This technology will also enable plant operators and public authorities to deal more effectively with nuclear abnormal incidents and increase gains in productivity, mainly in the repair and maintenance area. Community support is justified by the cost of the reliability and autonomy required for the nuclear teleoperator, the need to rationalise R and D investment in an area of increasing industrial potential and a common interest in coherent responses to emergencies. (author)

  5. Norms in multilevel groundwater governance and sustainable development

    NARCIS (Netherlands)

    Conti, K.I.

    2017-01-01

    Groundwater constitutes 98-99% of the world’s available freshwater resources. Humans abstract 200 times more groundwater than oil - using it heavily for domestic, municipal, agricultural and industrial purposes. Consequently, humans cause groundwater depletion and quality degradation in some

  6. CROSS-CORRELATION MODELLING OF SURFACE WATER – GROUNDWATER INTERACTION USING THE EXCEL SPREADSHEET APPLICATION

    Directory of Open Access Journals (Sweden)

    Kristijan Posavec

    2017-01-01

    Full Text Available Modelling responses of groundwater levels in aquifer systems, which occur as a reaction to changes in aquifer system boundary conditions such as river or stream stages, is commonly being studied using statistical methods, namely correlation, cross-correlation and regression methods. Although correlation and regression analysis tools are readily available in Microsoft Excel, a widely applied spreadsheet industry standard, the cross-correlation analysis tool is missing. As a part of research of groundwater pressure propagation into alluvial aquifer systems of the Sava and Drava/Danube River catchments following river stages rise, focused on estimating groundwater pressure travel times in aquifers, an Excel spreadsheet data analysis application for cross-correlation modelling has been designed and used in modelling surface water – groundwater interaction. Examples of fi eld data from the Zagreb aquifer system and the Kopački rit Nature Park aquifer system are used to illustrate the usefulness of the cross-correlation application.

  7. PM-HIP research for structural and pressuring retaining applications within the electric power industry

    International Nuclear Information System (INIS)

    Gandy, David W.

    2015-01-01

    For more than 60 years now, the nuclear power industry has relied on structural and pressure retaining materials generated via established manufacturing practices such as casting, plate rolling-and-welding, forging, drawing, and/or extrusion. During the past three years, EPRI has been leading the development and introduction of another established process, powder metallurgy and hot Isostatic pressing (PM/HIP), for pressure retaining applications in electric power industry. The research includes assessment of two primary alloys: 316L stainless steel and Grade 91 creep-strength enhanced ferritic steels, for introduction into the ASME Boiler and Pressure Vessel Code. Continuing DOE and EPRI research on other structural/pressure retaining alloys such as Alloy 690, SA 508 Class 1, Alloy 625, hard-facing materials, and others are also underway. This research will have a tremendous impact as we move forward over the next few decades on the selection of new alloys and components for advanced light water reactors and small modular reactors. Furthermore, fabrication of high alloy materials/components may require the use of new manufacturing processes to achieve acceptable properties for higher temperature applications such as those in Generation IV applications. Current research by EPRI and DOE will be reviewed and emphasis will be targeted at advanced applications where PM/HIP may be applied in the future. (authors)

  8. Funding of Parkinson research from industry and US federal and foundation sources.

    Science.gov (United States)

    Dorsey, E Ray; Thompson, Joel P; Frasier, Mark; Sherer, Todd; Fiske, Brian; Nicholson, Sean; Johnston, S Claiborne; Holloway, Robert G; Moses, Hamilton

    2009-04-15

    Funding for biomedical and neuroscience research has increased over the last decade but without a concomitant increase in new therapies. This study's objectives were to determine the level and principal sources of recent funding for Parkinson disease (PD) research and to determine the current state of PD drug development. We determined the level and principal sources of recent funding for PD research from the following sources: US federal agencies, large PD foundations based in the United States, and global industry. We assessed the status of PD drug development through the use of a proprietary drug pipeline database. Funding for PD research from the sources examined was approximately $1.1 billion in 2003 and $1.2 billion in 2005. Industry accounted for 77% of support from 2003 to 2005. The number of drugs in development for PD increased from 67 in 2003 to 97 in 2007. Of the companies with at least one compound in development for PD in 2007, most were small (62% had annual revenue of less than $100 million), and most (53%) were based outside the United States. These companies will likely require partnerships to drive successful development of new PD therapies.

  9. Hard X-ray synchrotron light source for industrial and materials research applications

    International Nuclear Information System (INIS)

    Lehr, H.; Ehrfeld, W.; Moser, H.O.; Schmidt, M.; Herminghaus, H.

    1992-01-01

    The requirements for industrial production or for an industry-related analytical environment is demonstrated for the case of the proposed hard X-ray synchrotron light source. The source is intended to provide radiation mainly for deep X-ray lithography as part of the LIGA-process in microfabrication, and for analytical and diagnostic purposes in materials research and microtechnology. It offers up to 48 bending magnet beamlines with a characteristic wavelength of 2 A. An electron energy of 2.5 GeV and normal conducting magnets will be used. A FODO lattice with a beam emittance of 3x10 -7 m rad and four dispersion-free straight sections to accommodate insertion devices, injection elements and RF structures has been designed. (R.P.) 5 refs.; 4 figs.; 1 tab

  10. Employment and other selected personnel attributes in metallurgical and industrial enterprises of different size - research results

    Directory of Open Access Journals (Sweden)

    A. Pawliczek

    2015-10-01

    Full Text Available The presented paper deals with the issue of employment and other selected personnel attributes as employees’ affiliations, employees’ benefits, monitoring of employees’ satisfaction, monitoring of work productivity, investments into employees education and obstacles in hiring qualified human resources. The characteristics are benchmarked on the background of enterprise size based on the employees count in the year 2013. The relevant data were collected in Czech industrial enterprises, including metallurgical companies, with the help of university questionnaire research in order to induce synergy effect arising from mutual communication of academy-students-industry. The most important results are presented later in the paper, complemented with discussion based on relevant professional literature sources. The findings suggest that bigger companies check productivity and satisfaction and dismiss employees more frequently, unlike medium companies which do not reduce their workforce and solve the impact of crisis by decreased affiliations, reduced benefits and similar savings.

  11. First Tuesday@CERN: Industrial partnership and innovation management at European research laboratories

    CERN Multimedia

    2003-01-01

    On Wednesday 19 March, CERN will host for the second time the 'First Tuesday Geneva' events for entrepreneurs, investors and all those interested in new technologies. The event is organised by the non-profit group Rezonance. The theme of this "First Tuesday@CERN" is familiar to CERN, as it concerns new trends of industrial partnership and innovation management at European research laboratories. As major sources of innovative technologies, large laboratories such as CERN, ESA, EMBL or ESRF have adopted over the past few years new strategies in the areas of industrial partnership and technological spin-offs. Speakers include: - Pierre Brisson, Head of Technology Transfer and Promotion Office, ESA : "The European Space Incubator at ESA" - Gabor Lamm, Managing Director EMBL Enterprise Management Technology Transfer : "EMBL Enterprise Management: Innovation Works" - Edward Mitchell, Coordinator of the PSB, ESRF : "The Partnership for Structural Biology" - Wolfgang von Rüden, Leader of Information Tech...

  12. Technology Roadmap for the 21st Century Truck Program, a government-industry research partnership

    Energy Technology Data Exchange (ETDEWEB)

    None

    2000-12-01

    The 21st Century Truck Program has been established as a government-industry research partnership to support the development and implementation of commercially viable technologies that will dramatically cut fuel use and emissions of commercial trucks and buses while enhancing their safety and affordability as well as maintaining or enhancing performance. The innovations resulting from this program will reduce dependence on foreign oil, improve our nation's air quality, provide advanced technology for military vehicles, and enhance the competitiveness of the U.S. truck and bus industry while ensuring safe and affordable freight and bus transportation for the nation's economy. This Technology Roadmap for the 21st Century Truck Program has been prepared to guide the development of the technical advancements that will enable the needed improvements in commercial truck fuel economy, emissions, and safety.

  13. Business analysis methodology in telecommunication industry – the research based on the grounded theory

    Directory of Open Access Journals (Sweden)

    Hana Nenickova

    2013-10-01

    Full Text Available The objective of this article is to present the grounded theory using in the qualitative research as a basis to build a business analysis methodology for the implementation of information systems in telecommunication enterprises in Czech Republic. In the preparation of the methodology I have used the current needs of telecommunications companies, which are characterized mainly by high dependence on information systems. Besides that, this industry is characterized by high flexibility and competition and compressing of the corporate strategy timeline. The grounded theory of business analysis defines the specifics of the telecommunications industry, focusing on the very specific description of the procedure for collecting the business requirements and following the business strategy.

  14. [Research strategies for feed additives and veterinary medicines from side products of Chinese medicine resources industrialization].

    Science.gov (United States)

    Zhao, Ming; Duan, Jin-Ao; Zhang, Sen; Guo, Sheng; Su, Shu-Lan; Wu, Qi-Nan; Tang, Yu-Ping; Zeng, Jian-Guo

    2017-09-01

    The global antimicrobial resistance has been a big challenge to the human health for years. It has to make balance between the safety of animal products and the use of antimicrobials in animal husbandry. Any methods that can minimize or even phase out the use of antimicrobials in animal husbandry should be encouraged. We herein describe the research strategies for feed additives and veterinary medicines from the side products of Chinese medicine resources industrialization. Killing two birds with one stone-besides the major purposes, the rational utilization of non-medicinal parts and wastes of industrialization of Chinese herbal medicines is also achieved under the proposed strategies. Copyright© by the Chinese Pharmaceutical Association.

  15. The Impact of Foreign Ownership on Research and Development Intensity and Technology Acquisition in Indian Industries

    DEFF Research Database (Denmark)

    Aggarwal, Aradhna

    2018-01-01

    of the Center for Monitoring Indian Economy. Foreign ownership is categorized according to the level of control exercised by foreign firms as defined under the Companies Act of India. A comparative analysis of domestic and different categories of foreign firms was conducted for two time periods: (i) the global...... boom period of 2004–2008, and (ii) the post global financial crisis period of 2008–2014. A horizontal cluster analysis of 3-digit, industry-level data shows that foreign firms cluster in high-technology industries. The propensity score matching analysis, however, reveals that in a matched sample...... of foreign and domestic firms, majority-owned foreign firms spend less on research and development and more on technology transfers than their local counterparts, demonstrating that the level of equity holdings by a foreign firm matters. There is little evidence of the global financial crisis affecting...

  16. Global scale groundwater flow model

    Science.gov (United States)

    Sutanudjaja, Edwin; de Graaf, Inge; van Beek, Ludovicus; Bierkens, Marc

    2013-04-01

    As the world's largest accessible source of freshwater, groundwater plays vital role in satisfying the basic needs of human society. It serves as a primary source of drinking water and supplies water for agricultural and industrial activities. During times of drought, groundwater sustains water flows in streams, rivers, lakes and wetlands, and thus supports ecosystem habitat and biodiversity, while its large natural storage provides a buffer against water shortages. Yet, the current generation of global scale hydrological models does not include a groundwater flow component that is a crucial part of the hydrological cycle and allows the simulation of groundwater head dynamics. In this study we present a steady-state MODFLOW (McDonald and Harbaugh, 1988) groundwater model on the global scale at 5 arc-minutes resolution. Aquifer schematization and properties of this groundwater model were developed from available global lithological model (e.g. Dürr et al., 2005; Gleeson et al., 2010; Hartmann and Moorsdorff, in press). We force the groundwtaer model with the output from the large-scale hydrological model PCR-GLOBWB (van Beek et al., 2011), specifically the long term net groundwater recharge and average surface water levels derived from routed channel discharge. We validated calculated groundwater heads and depths with available head observations, from different regions, including the North and South America and Western Europe. Our results show that it is feasible to build a relatively simple global scale groundwater model using existing information, and estimate water table depths within acceptable accuracy in many parts of the world.

  17. Groundwater vulnerability assessment: from overlay methods to statistical methods in the Lombardy Plain area

    Directory of Open Access Journals (Sweden)

    Stefania Stevenazzi

    2017-06-01

    Full Text Available Groundwater is among the most important freshwater resources. Worldwide, aquifers are experiencing an increasing threat of pollution from urbanization, industrial development, agricultural activities and mining enterprise. Thus, practical actions, strategies and solutions to protect groundwater from these anthropogenic sources are widely required. The most efficient tool, which helps supporting land use planning, while protecting groundwater from contamination, is represented by groundwater vulnerability assessment. Over the years, several methods assessing groundwater vulnerability have been developed: overlay and index methods, statistical and process-based methods. All methods are means to synthesize complex hydrogeological information into a unique document, which is a groundwater vulnerability map, useable by planners, decision and policy makers, geoscientists and the public. Although it is not possible to identify an approach which could be the best one for all situations, the final product should always be scientific defensible, meaningful and reliable. Nevertheless, various methods may produce very different results at any given site. Thus, reasons for similarities and differences need to be deeply investigated. This study demonstrates the reliability and flexibility of a spatial statistical method to assess groundwater vulnerability to contamination at a regional scale. The Lombardy Plain case study is particularly interesting for its long history of groundwater monitoring (quality and quantity, availability of hydrogeological data, and combined presence of various anthropogenic sources of contamination. Recent updates of the regional water protection plan have raised the necessity of realizing more flexible, reliable and accurate groundwater vulnerability maps. A comparison of groundwater vulnerability maps obtained through different approaches and developed in a time span of several years has demonstrated the relevance of the

  18. Streamflow depletion by wells--Understanding and managing the effects of groundwater pumping on streamflow

    Science.gov (United States)

    Barlow, Paul M.; Leake, Stanley A.

    2012-11-02

    Groundwater is an important source of water for many human needs, including public supply, agriculture, and industry. With the development of any natural resource, however, adverse consequences may be associated with its use. One of the primary concerns related to the development of groundwater resources is the effect of groundwater pumping on streamflow. Groundwater and surface-water systems are connected, and groundwater discharge is often a substantial component of the total flow of a stream. Groundwater pumping reduces the amount of groundwater that flows to streams and, in some cases, can draw streamflow into the underlying groundwater system. Streamflow reductions (or depletions) caused by pumping have become an important water-resource management issue because of the negative impacts that reduced flows can have on aquatic ecosystems, the availability of surface water, and the quality and aesthetic value of streams and rivers. Scientific research over the past seven decades has made important contributions to the basic understanding of the processes and factors that affect streamflow depletion by wells. Moreover, advances in methods for simulating groundwater systems with computer models provide powerful tools for estimating the rates, locations, and timing of streamflow depletion in response to groundwater pumping and for evaluating alternative approaches for managing streamflow depletion. The primary objective of this report is to summarize these scientific insights and to describe the various field methods and modeling approaches that can be used to understand and manage streamflow depletion. A secondary objective is to highlight several misconceptions concerning streamflow depletion and to explain why these misconceptions are incorrect.

  19. Resurrecting Legacy Code Using Ontosoft Knowledge-Sharing and Digital Object Management to Revitalize and Reproduce Software for Groundwater Management Research

    Science.gov (United States)

    Kwon, N.; Gentle, J.; Pierce, S. A.

    2015-12-01

    Software code developed for research is often used for a relatively short period of time before it is abandoned, lost, or becomes outdated. This unintentional abandonment of code is a valid problem in the 21st century scientific process, hindering widespread reusability and increasing the effort needed to develop research software. Potentially important assets, these legacy codes may be resurrected and documented digitally for long-term reuse, often with modest effort. Furthermore, the revived code may be openly accessible in a public repository for researchers to reuse or improve. For this study, the research team has begun to revive the codebase for Groundwater Decision Support System (GWDSS), originally developed for participatory decision making to aid urban planning and groundwater management, though it may serve multiple use cases beyond those originally envisioned. GWDSS was designed as a java-based wrapper with loosely federated commercial and open source components. If successfully revitalized, GWDSS will be useful for both practical applications as a teaching tool and case study for groundwater management, as well as informing theoretical research. Using the knowledge-sharing approaches documented by the NSF-funded Ontosoft project, digital documentation of GWDSS is underway, from conception to development, deployment, characterization, integration, composition, and dissemination through open source communities and geosciences modeling frameworks. Information assets, documentation, and examples are shared using open platforms for data sharing and assigned digital object identifiers. Two instances of GWDSS version 3.0 are being created: 1) a virtual machine instance for the original case study to serve as a live demonstration of the decision support tool, assuring the original version is usable, and 2) an open version of the codebase, executable installation files, and developer guide available via an open repository, assuring the source for the

  20. A high resolution (1 km) groundwater model for Indonesia

    Science.gov (United States)

    Sutanudjaja, Edwin; Verkaik, Jarno; de Graaf, Inge; van Beek, Rens; Erkens, Gilles; Bierkens, Marc

    2015-04-01

    Groundwater is important in many parts of Indonesia. It serves as a primary source of drinking water and industrial activities. During times of drought, it sustains water flows in streams, rivers, lakes and wetlands, and thus support ecosystem habitat and biodiversity as well as preventing hazardous forest fire. Besides its importance, groundwater is known as a vulnerable resource as unsustainable groundwater exploitation and management occurs in many areas of the country. Therefore, in order to ensure sustainable management of groundwater resources, monitoring and predicting groundwater changes in Indonesia are imperative. However, large extent groundwater models to assess these changes on a regional scale are almost non-existent and are hampered by the strong topographical and lithological transitions that characterize Indonesia. In this study, we built an 1 km resolution groundwater model for the entire Indonesian archipelago (total inland area: about 2 million km2). We adopted the approaches of Sutanudjaja et al. (2011, 2014a) and de Graaf et al. (2014) in order to make a MODFLOW (Harbaugh et al., 2000) groundwater model by using only global datasets. Aquifer schematization and properties of the groundwater model were developed from available global lithological maps (e.g. Dürr et al., 2005; Gleeson et al., 2011; Hartmann & Moorsdorf, 2012; Gleeson et al., 2014). We forced the groundwater model with the recent output of global hydrological model PCR-GLOBWB version 2.0 (Sutanudjaja et al., 2014b; van Beek et al., 2011), specifically the long term average of groundwater recharge and average surface water levels derived from channel discharge. Simulation results were promising. The MODFLOW model converged with realistic aquifer properties (i.e. transmissivities) and produced reasonable groundwater head spatial distribution reflecting the positions of major groundwater bodies and surface water bodies in the country. In Vienna, we aim to show and demonstrate these

  1. The role of environmental tax incentives to promote innovation and improve the management of groundwater: a case study analysis of the unconventional natural gas industry in Alberta

    OpenAIRE

    Jarvie, Deborah Lynn

    2017-01-01

    Water accounts for more than seventy percent of the earth’s surface, yet less than three percent of this water is freshwater fit for human use, and of this three percent, less than one percent is readily accessible – most of which is ‘groundwater’. This thesis argues that regulation for the protection of groundwater is long overdue for renewal. Examining the literature and conducting a case study, it assesses whether the greater use of tax incentives (TIs) to encourage environmental te...

  2. Summary of workshop 'Theory Meets Industry' - the impact of ab initio solid state calculations on industrial materials research

    International Nuclear Information System (INIS)

    Wimmer, E

    2008-01-01

    A workshop, 'Theory Meets Industry', was held on 12-14 June 2007 in Vienna, Austria, attended by a well balanced number of academic and industrial scientists from America, Europe, and Japan. The focus was on advances in ab initio solid state calculations and their practical use in industry. The theoretical papers addressed three dominant themes, namely (i) more accurate total energies and electronic excitations (ii) more complex systems, and (iii) more diverse and accurate materials properties. Hybrid functionals give some improvements in energies, but encounter difficulties for metallic systems. Quantum Monte Carlo methods are progressing, but no clear breakthrough is on the horizon. Progress in order-N methods is steady, as is the case for efficient methods for exploring complex energy hypersurfaces and large numbers of structural configurations. The industrial applications were dominated by materials issues in energy conversion systems, the quest for hydrogen storage materials, improvements of electronic and optical properties of microelectronic and display materials, and the simulation of reactions on heterogeneous catalysts. The workshop is a clear testimony that ab initio computations have become an industrial practice with increasingly recognized impact

  3. Summary of workshop 'Theory Meets Industry'—the impact of ab initio solid state calculations on industrial materials research

    Science.gov (United States)

    Wimmer, E.

    2008-02-01

    A workshop, 'Theory Meets Industry', was held on 12-14 June 2007 in Vienna, Austria, attended by a well balanced number of academic and industrial scientists from America, Europe, and Japan. The focus was on advances in ab initio solid state calculations and their practical use in industry. The theoretical papers addressed three dominant themes, namely (i) more accurate total energies and electronic excitations, (ii) more complex systems, and (iii) more diverse and accurate materials properties. Hybrid functionals give some improvements in energies, but encounter difficulties for metallic systems. Quantum Monte Carlo methods are progressing, but no clear breakthrough is on the horizon. Progress in order-N methods is steady, as is the case for efficient methods for exploring complex energy hypersurfaces and large numbers of structural configurations. The industrial applications were dominated by materials issues in energy conversion systems, the quest for hydrogen storage materials, improvements of electronic and optical properties of microelectronic and display materials, and the simulation of reactions on heterogeneous catalysts. The workshop is a clear testimony that ab initio computations have become an industrial practice with increasingly recognized impact.

  4. The use of participant-observation protocol in an industrial engineering research.

    Science.gov (United States)

    Silveira e Silva, Renato da; Sznelwar, Laerte Idal; D'Afonseca e Silva, Victor

    2012-01-01

    Based on literature, this article aims to present the "participant-observation' research protocol, and its practical application in the industrial engineering field, more specifically within the area of design development, and in the case shown by this article, of interiors' design. The main target is to identify the concept of the method, i.e., from its characteristics to structure a general sense about the subject, so that the protocol can be used in different areas of knowledge, especially those ones which are committed with the scientific research involving the expertise from researchers, and subjective feelings and opinions of the users of an engineering product, and how this knowledge can be benefic for product design, contributing since the earliest stage of design.

  5. CAD, 3D modeling, engineering analysis, and prototype experimentation industrial and research applications

    CERN Document Server

    Zheng Li, Jeremy

    2015-01-01

    This succinct book focuses on computer aided design (CAD), 3-D modeling, and engineering analysis and the ways they can be applied effectively in research and industrial sectors including aerospace, defense, automotive, and consumer products. These efficient tools, deployed for R&D in the laboratory and the field, perform efficiently three-dimensional modeling of finished products, render complex geometrical product designs, facilitate structural analysis and optimal product design, produce graphic and engineering drawings, and generate production documentation. Written with an eye toward green energy installations and novel manufacturing facilities, this concise volume enables scientific researchers and engineering professionals to learn design techniques, control existing and complex issues, proficiently use CAD tools, visualize technical fundamentals, and gain analytic and technical skills. This book also: ·       Equips practitioners and researchers to handle powerful tools for engineering desi...

  6. CUEPRA-Clemson University electric power research association: An industry/university partnership for excellence in power engineering education and research

    International Nuclear Information System (INIS)

    Girgis, A.A.; Makram, E.B.; Cline, M.L.; Fortson, H.S.

    1993-01-01

    A unique structure for the Clemson University Electric Power Research Association (CUEPRA) has been established to promote electric power system research and to meet the need for a working communication link between the power industry and the academic community. This paper presents the power industries involvement in the power program at Clemson University and the strategic improvements that have been accomplished in research and education

  7. Designing of Success Criteria-based Evaluation Model for Assessing the Research Collaboration between University and Industry

    OpenAIRE

    Abeda Muhammad Iqbal; Adnan Shahid Khan; Saima Iqbal; Aslan Amat Senin

    2011-01-01

    Innovations and inventions are not outcomes of single activity of any organization. This is a resultof collaboration of different partners. Collaborated research of university and industry canenhance the ability of scientist to make significant advances in their fields. The evaluation ofcollaborated research between university and industry has created the greatest interest amongstthe collaborational researchers as it can determine the feasibility and value of thecollaboration. This paper inte...

  8. Fossil Fuel Industry Funding of Climate-Relevant Research at U.S. Universities

    Science.gov (United States)

    Franta, B.; Supran, G.

    2017-12-01

    Commercial producers of lead, tobacco, petroleum, and other products have funded extensive scholarly research in ways designed to confuse the public about the dangers of those products and thwart regulation [1-3]. For example, strategy documentation of the U.S. oil and gas industry from the late 1990s describes using selective support for scientists as a strategy for creating an atmosphere of debate and uncertainty, with the ultimate goal of delaying and defeating climate policies [4]. In this context, we systematically examine current funding from commercial fossil fuel interests of climate-relevant research - such as energy technology and climate policy research - in U.S. universities. We quantify such funding using charitable giving databases, university websites, and other publicly available records. We find that, especially among the most influential universities, climate-related research programs are frequently dominated by funding from fossil fuel interests. Moreover, these relationships sometimes afford funders privileges including formal control over research directions. This work represents an advance in mapping the presence of commercial fossil fuel interests in academia and may contribute to discussions of appropriate funding systems for climate-relevant research. 1. Markowitz, G. and D. Rosner, Lead Wars: The Politics of Science and the Fate of America's Children. 1st ed. 2013: University of California Press. 2. Brandt, A.M., Inventing Conflicts of Interest: A History of Tobacco Industry Tactics. American Journal of Public Health, 2012. 102(1): p. 63-71. 3. Oreskes, N. and E.M. Conway, Merchants of Doubt: How a Handful of Scientists Obscured the Truth on Issues from Tobacco Smoke to Global Warming. 2011: Bloomsbury Press. 4. Walker, J., Global Climate Science Communications Action Plan. 1998. Workshop held at the headquarters of the American Petroleum Institute.

  9. Sources of groundwater contamination

    International Nuclear Information System (INIS)

    Assaf, H.; Al-Masri, M. S.

    2007-09-01

    In spite of the importance of water for life, either for drinking, irrigation, industry or other wide uses in many fields, human beings seem to contaminate it and make it unsuitable for human uses. This is due to disposal of wastes in the environment without treatment. In addition to population increase and building expanding higher living costs, industrial and economical in growth that causes an increase in water consumption. All of these factors have made an increase pressure on our water environment quantitatively and qualitatively. In addition, there is an increase of potential risks to the water environmental due to disposal of domestic and industrial wastewater in areas near the water sources. Moreover, the use of unacceptable irrigation systems may increase soil salinity and evaporation rates. The present report discusses the some groundwater sources and problem, hot and mineral waters that become very important in our life and to our health due to its chemical and radioactivity characteristics.(authors)

  10. "Do non-R&D intensive industries benefit of spillovers from public research? The case of the Agro-food industry

    OpenAIRE

    Vincent Mangematin; Nadine Mandran

    2001-01-01

    The agro-food industry is a sector in which the percentage of firms which have done innovation in the past three years is high, whereas they have a low research capacity. According to an innovation survey (1986-90) in France, 70% of agro-food firms which responded in the Community Innovation Survey (CIS), reported innovations while less than 5% of them had internal research capacities. Our paper models estimates of determinants of innovation in the agro-food industry. Based on the comparison ...

  11. Evaluation method of economic efficiency of industrial scale research based on an example of coking blend pre-drying technology

    Directory of Open Access Journals (Sweden)

    Żarczyński Piotr

    2017-01-01

    Full Text Available The research on new and innovative solutions, technologies and products carried out on an industrial scale is the most reliable method of verifying the validity of their implementation. The results obtained in this research method give almost one hundred percent certainty although, at the same time, the research on an industrial scale requires the expenditure of the highest amount of money. Therefore, this method is not commonly applied in the industrial practices. In the case of the decision to implement new and innovative technologies, it is reasonable to carry out industrial research, both because of the cognitive values and its economic efficiency. Research on an industrial scale may prevent investment failure as well as lead to an improvement of technologies, which is the source of economic efficiency. In this paper, an evaluation model of economic efficiency of the industrial scale research has been presented. This model is based on the discount method and the decision tree model. A practical application of this proposed evaluation model has been presented based on an example of the coal charge pre-drying technology before coke making in a coke oven battery, which may be preceded by industrial scale research on a new type of coal charge dryer.

  12. Micro factors bringing the pharmaceutical industry to a seismic shaking a qualitative research.

    Science.gov (United States)

    Dierks, Raphaela Marie Louisa; Bruyère, Olivier; Reginster, Jean-Yves

    2017-06-01

    Due to changing macro and micro factors, expiring patents and falling net income, pharmaceutical companies need to rethink their vertical business model. The trend shows cross-sectorial partnerships and consolidation to remain and compete on the market. Areas covered: Quantitative research interviewing a target group of 25 key executives from small, mid and large global pharmaceutical companies rounded with qualitative literature research completing the analysis. Expert commentary: Uncertainty in the industry due to changing external factors i.e. pricing pressures, regulations or an economic slowdown, slowing down innovations and new drug outcomes. Pharmaceutical companies understand the existing hurdles, and are critically optimistic implementing new business models. Also, various stakeholders are included in the value chain due to their growing importance. During the next years, the industry will be restructured from volume towards value, and only pharmaceutical companies' clairaudient and reciprocate to the changes with an out-off the box thinking will be able to resist on the market. Small biotech companies should focus on research, and big pharmaceutical companies entering at development focusing on the process until the distribution. This execution business recommendation would enable the best know-how at the right point, mitigating the risk and enhancing the patient outcomes.

  13. Scenarios of bioenergy development impacts on regional groundwater withdrawals

    Science.gov (United States)

    Uden, Daniel R.; Allen, Craig R.; Mitchell, Rob B.; Guan, Qingfeng; McCoy, Tim D.

    2013-01-01

    Irrigation increases agricultural productivity, but it also stresses water resources (Huffaker and Hamilton 2007). Drought and the potential for drier conditions resulting from climate change could strain water supplies in landscapes where human populations rely on finite groundwater resources for drinking, agriculture, energy, and industry (IPCC 2007). For instance, in the North American Great Plains, rowcrops are utilized for livestock feed, food, and bioenergy production (Cassman and Liska 2007), and a large portion is irrigated with groundwater from the High Plains aquifer system (McGuire 2011). Under projected future climatic conditions, greater crop water use requirements and diminished groundwater recharge rates could make rowcrop irrigation less feasible in some areas (Rosenberg et al. 1999; Sophocleous 2005). The Rainwater Basin region of south central Nebraska, United States, is an intensively farmed and irrigated Great Plains landscape dominated by corn (Zea mays L.) and soybean (Glycine max L.) production (Bishop and Vrtiska 2008). Ten starch-based ethanol plants currently service the region, producing ethanol from corn grain (figure 1). In this study, we explore the potential of switchgrass (Panicum virgatum L.), a drought-tolerant alternative bioenergy feedstock, to impact regional annual groundwater withdrawals for irrigation under warmer and drier future conditions. Although our research context is specific to the Rainwater Basin and surrounding North American Great Plains, we believe the broader research question is internationally pertinent and hope that this study simulates similar research in other areas.

  14. TRENDS IN A SOUTH AFRICAN INDUSTRIAL ENGINEERING RESEARCH JOURNAL: A TEXTUAL INFORMATION ANALYSIS PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    J.W. Uys

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Industrial engineering (IE is a multi-disciplinary field, with its research borders broadening into a wide range of sub-disciplines. The South African Journal of Industrial Engineering (SAJIE has been the official voice of IE research in South Africa for the past 22 years. In the interests of evaluating research scope, it is worth determining how IE fields have been covered by this journal. What are the current topics in IE, and how do they align with IE publication trends in other countries? This article attempts to investigate these issues in an objective way by using a text analytical technique to analyse the SAJIE publication collection. Due to the growth in the quantity of accessible textual information, and the growing importance of this type of information to business people and industrial engineers alike, the relevant text analytical method is also outlined.

    AFRIKAANSE OPSOMMING: Bedryfsingenieurswese is ’n multidissiplinêre veld, met navorsingsgrense wat strek oor ’n wye reeks sub-dissiplines. Die Suid-Afrikaanse Tydskrif vir Bedryfsingenieurswese (SAJIE was oor die afgelope 22 jaar die amptelike mondstuk vir bedryfsingenieurswese-gerigte navorsing in Suid-Afrika. Dit is betekenisvol om te bepaal in watter hoedanigheid bedryfsingenieurswesevelde deur die SAJIE gedek word, ten einde die bestek van navorsing te evalueer. Wat is die huidige temas van bedryfsingenieurswese, en hoe vergelyk dit met bedryfsingenieurswese-publikasieneigings in ander lande? Hierdie artikel poog om die vraagstuk op ’n objektiewe wyse na te vors deur die toepassing van ’n teksanalitiese tegniek om die SAJIE publikasie versameling te ontleed. Weens die toename in die hoeveelheid beskikbare tekstuele inligting, asook die toenemende belang van hierdie tipe inligting vir besigheidspersone asook bedryfsingenieurs, word die betrokke teksanalitiese metode ook bespreek.

  15. University of Tennessee - Industry collaborative research and development in preventive maintenance technology

    International Nuclear Information System (INIS)

    Upadhyaya, B.R.

    1992-01-01

    The Preventive Maintenance Engineering Laboratory (PMEL) was inaugurated at the University of Tennessee Nuclear Engineering Department in September 1989. The startup funding was provided by Gilbert/Commonwealth, Inc. The purpose of PMEL is to identify maintenance-related problems in the power and process industries and to find their solutions through the development and application of emerging technologies. These include advanced digital signal processing, applied artificial intelligence (AI), artificial neural networks, and reliability based methods. The Laboratory activities are being expanded by the formation of an industrial consortium within the Measurement and Control Engineering Center at the University of Tennessee. Several research and development projects in preventive maintenance are being carried out. These include condition monitoring of air operated valves, automated diagnostics of motor operated valves, instrument calibration, verification, and estimation of expected residual life of electric motors using applied AI technology and reliability-based methods. The new methodology will be applied to other industrial subsystems. A long-term research and development project is being sponsored by the T.V.A. Nuclear Maintenance Department. The overall objective of the research program is to develop and apply advanced artificial intelligence and information processing methods to the problems of plant performance monitoring and preventive maintenance. The program includes the development of a workstation/PC-based, networking of plant information for easy access to operational and management personnel, implementation of a sensor verification system, monitoring of feedwater flow venturi fouling and heat rate balance, and integration of signal validation, command validation, and fault-tolerant control strategies

  16. Energy Efficient Industrialized Housing Research Program, Center for Housing Innovation, University of Oregon and the Florida Solar Energy Center

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G.Z.

    1990-01-01

    This research program addresses the need to increase the energy efficiency of industrialized housing. Two research centers have responsibility for the program: the Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. The two organizations provide complementary architectural, systems engineering, and industrial engineering capabilities. In 1989 we worked on these tasks: (1) the formation of a steering committee, (2) the development of a multiyear research plan, (3) analysis of the US industrialized housing industry, (4) assessment of foreign technology, (5) assessment of industrial applications, (6) analysis of computerized design and evaluation tools, and (7) assessment of energy performance of baseline and advanced industrialized housing concepts. The current research program, under the guidance of a steering committee composed of industry and government representatives, focuses on three interdependent concerns -- (1) energy, (2) industrial process, and (3) housing design. Building homes in a factory offers the opportunity to increase energy efficiency through the use of new materials and processes, and to increase the value of these homes by improving the quality of their construction. Housing design strives to ensure that these technically advanced homes are marketable and will meet the needs of the people who will live in them.

  17. The Impact of Climate Change on Groundwater Resources and Groundwater Quality in the Patcham Catchment, England.

    Science.gov (United States)

    Phillips, R. J.; Smith, M.; Pope, D. J.; Gumm, L.

    2012-04-01

    The CLIMAWAT project is an EU-Regional Development Fund Interreg IV funded research programme to study the impacts of climate change on groundwater resources and groundwater quality from the Chalk aquifer of SE England. The use of partially treated wastewater for artificial recharge will also be extensively studied in both the field and laboratory. The Chalk is a major aquifer and regionally supplies 70% of potable water supplies. The long term sustainable use of this resource is of paramount importance and the outcomes of this project will better inform and enhance long term management strategies for this. Project partners include water companies, regulatory bodies and industry consultancies. The four main objectives of the CLIMAWAT project are: i) better improve the prediction of the impact of climate change on this groundwater resource; ii) better understand and quantify how recharge mechanisms will vary due to the uncertainty associated with climate change; iii) better understand the storage mechanisms and fate of contaminants (e.g. nitrates and pesticides) in this aquifer and iv) investigate the impact of using partially treated wastewater for artificial recharge. An extensive field monitoring and data collection programme is underway in the Patcham Catchment (SE of England). Simultaneous monitoring of climatic, unsaturated zone potentiometric, groundwater level and chemistry data will allow for a better understanding of how changes in recharge patterns will effect groundwater quality and quantity. Isoptopic analysis of sampled groundwaters has allowed for interpretations and a better understanding of the storage and movement of water through this aquifer. The laboratory experimental programme is also underway and the results from this will compliment the field based studies to further enhance the understanding of contaminant behaviour in the both unsaturated and saturated zones. Core experiments are being used to investigate how nutrient and other

  18. An inverse modeling approach to estimate groundwater flow and transport model parameters at a research site at Vandenberg AFB, CA

    Science.gov (United States)

    Rasa, E.; Foglia, L.; Mackay, D. M.; Ginn, T. R.; Scow, K. M.

    2009-12-01

    A numerical groundwater fate and transport model was developed for analyses of data from field experiments evaluating the impacts of ethanol on the natural attenuation of benzene, toluene, ethylbenzene, and xylenes (BTEX) and methyl tert-butyl ether (MTBE) at Vandenberg Air Force Base, Site 60. We used the U.S. Geological Survey (USGS) groundwater flow (MODFLOW2000) and transport (MT3DMS) models in conjunction with the USGS universal inverse modeling code (UCODE) to jointly determine flow and transport parameters using bromide tracer data from multiple experiments in the same location. The key flow and transport parameters include hydraulic conductivity of aquifer and aquitard layers, porosity, and transverse and longitudinal dispersivity. Aquifer and aquitard layers were assumed homogenous in this study. Therefore, the calibration parameters were not spatially variable within each layer. A total of 162 monitoring wells in seven transects perpendicular to the mean flow direction were monitored over the course of ten months, resulting in 1,766 bromide concentration data points and 149 head values used as observations for the inverse modeling. The results showed the significance of the concentration observation data in predicting the flow model parameters and indicated the sensitivity of the hydraulic conductivity of different zones in the aquifer including the excavated former contaminant zone. The model has already been used to evaluate alternative designs for further experiments on in situ bioremediation of the tert-butyl alcohol (TBA) plume remaining at the site. We describe the recent applications of the model and future work, including adding reaction submodels to the calibrated flow model.

  19. The role of science and technology parks in communication processes between research institutions and industry

    Directory of Open Access Journals (Sweden)

    Paweł Sobkowicz

    2013-12-01

    Full Text Available Among the ways to bridge the gap between the research communities and the industry, one of the best known are the Science and Technology Parks. The scope of the offered services, the scale of operations and their revenues vary considerably. The largest parks gather companies, whose revenues may reach billions of dollars. Achieving such success requires, from the park operators, much more than offering attractive prices for office space. Moreover, it requires well-coordinated activities, based on a long term vision, from the central governments. The paper presents an analysis of the factors determining the success or fiasco of science and technology parks, both in worldwide and Polish context.

  20. Trends in Food Research and Development: A Survey of the Commercial Food Industry

    Science.gov (United States)

    1987-09-01

    top priority of research and development in the food industry; however, the consumer market has chanqed dramatically since the beginning of this decade...Canned & Preserved Fruits & Vegetables 45.6 204 Grain Mill Products 32.4 205 Bakery Products 33.8 206 Sugar & Confectionery Products 32.4 207 Fats & Oils...15.6 40.6 39.1 Aseptic Packaging of Particulates 0.0 0.0 14.5 36.0 49.5 Genetic Engineering 1.5 7.6 21.2 36.4 33.3 The market share of frozen foods is

  1. Big Data: Challenge and Opportunity for Translational and Industrial Research in Healthcare

    Directory of Open Access Journals (Sweden)

    Riccardo L. Rossi

    2018-05-01

    Full Text Available Research and innovation are constant imperatives for the healthcare sector: medicine, biology and biotechnology support it, and more recently computational and data-driven disciplines gained relevance to handle the massive amount of data this sector is and will be generating. To be effective in translational and healthcare industrial research, big data in the life science domain need to be organized, well annotated, catalogued, correlated and integrated: the biggest the data silos at hand, the stronger the need for organization and tidiness. The degree of such organization marks the transition from data to knowledge for strategic decision making. Medicine is supported by observations and data and for certain aspects medicine is becoming a data science supported by clinicians. While medicine defines itself as personalized, quantified (precision med or in high-definition, clinicians should be prepared to deal with a world in which Internet of People paraphrases the Internet of Things paradigm. Integrated use of electronic health records (EHRs and quantitative data (both clinical and molecular is a key process to develop precision medicine. Health records collection was originally designed for patient care and billing and/or insurance purposes. The digitization of health records facilitates and opens up new possibilities for science and research and they should be now collected and managed with this aim in mind. More data and the ability to efficiently handle them is a significant advantage not only for clinicians and life science researchers, but for drugs producers too. In an industrial sector spending increasing efforts on drug repurposing, attention to efficient methods to unwind the intricacies of the hugely complex reality of human physiology, such as network based methods and physical chemistry computational methods, became of paramount importance. Finally, the main pillars of industrial R&D processes for vaccines, include initial discovery

  2. Preservation of nuclear talented experts in Japan by cooperation of industries, research institutes and universities

    International Nuclear Information System (INIS)

    Mori, H.; Miura, K.

    2004-01-01

    Japan has enjoyed decades-long successful development of nuclear power generation and has a nuclear generating capacity of about 46,000,000 kilowatts at present. Construction of a commercial reprocessing plant in Rokkasho is nearing completion. The continuation of Japan's nuclear technology and experience, however, and the challenge of securing technically trained human resources for the future, present serious problems. Recognizing this, the nuclear industry, universities and research institutes have joined in new cooperative efforts to find network-oriented solutions. (author)

  3. Making and Doing Politics Through Grassroots Scientific Research on the Energy and Petrochemical Industries

    Directory of Open Access Journals (Sweden)

    Sara Wylie

    2017-09-01

    Full Text Available The high stakes of emergent environmental crises, from climate change to widespread toxic exposures, have motivated STS practitioners to innovate methodologically, including leveraging STS scholarship to actively remake environmental scientific practice and technologies. This thematic collection brings together current research that transforms how communities and academics identify, study, and collectively respond to contaminants engendered by the fossil fuel and petrochemical industries, including air contamination from hydraulic fracking, marine pollution from petroleum-derived plastics, and hydrocarbon derivatives such as formaldehyde that intoxicate our homes. These interventions make inroads into the “undone science” and “regimes of imperceptibility” of environmental health crises. Authors, most of whom are practitioners, investigate grassroots methods for collaboratively designing and developing low-cost monitoring tools, crowdsourcing data analysis, and imagining ways of redressing toxicity outside of the idioms of science. Collectively, these articles work towards remaking how knowledge is made about and across industrial systems by networking community grounded approaches for accounting for environmental health issues created by the fossil fuels and allied petrochemical industries.

  4. Research utilization in the building industry: decision model and preliminary assessment

    Energy Technology Data Exchange (ETDEWEB)

    Watts, R.L.; Johnson, D.R.; Smith, S.A.; Westergard, E.J.

    1985-10-01

    The Research Utilization Program was conceived as a far-reaching means for managing the interactions of the private sector and the federal research sector as they deal with energy conservation in buildings. The program emphasizes a private-public partnership in planning a research agenda and in applying the results of ongoing and completed research. The results of this task support the hypothesis that the transfer of R and D results to the buildings industry can be accomplished more efficiently and quickly by a systematic approach to technology transfer. This systematic approach involves targeting decision makers, assessing research and information needs, properly formating information, and then transmitting the information through trusted channels. The purpose of this report is to introduce elements of a market-oriented knowledge base, which would be useful to the Building Systems Division, the Office of Buildings and Community Systems and their associated laboratories in managing a private-public research partnership on a rational systematic basis. This report presents conceptual models and data bases that can be used in formulating a technology transfer strategy and in planning technology transfer programs.

  5. Exotic plant species around Jeongeup Research Complex and RFT industrial complex

    International Nuclear Information System (INIS)

    Kim, Jin Kyu; Cha, Min Kyoung; Ryu, Tae Ho; Lee, Yun Jong; Kim, Jin Hong

    2015-01-01

    In Shinjeong-dong of Jeongeup, there are three government-supported research institutes and an RFT industrial complex which is currently being established. Increased human activities can affect flora and fauna as a man-made pressure onto the region. As a baseline study, status of exotic plants was investigated prior to a full operation of the RFT industrial complex. A total of 54 species and 1 variety of naturalized or introduced plants were found in the study area. Among them, three species (Ambrosia artemisifolia var. elatior, Rumex acetocella and Aster pilosus) belong to 'nuisance species', and four species (Phytolacca americana, Iopomoea hederacea, Ereechtites hieracifolia and Rudbeckia laciniata) to ‘monitor species’ designated by the ministry of Environment. Some of naturalized trees and plants were intentionally introduced in this area, while others naturally immigrated. Physalis angulata seems to immigrate in the study area in the form of mixture with animal feeds as its distribution coincided with the transportation route of the animal feeds. Liquidambar styraciflua is amenable to the ecological investigation on the possible expansion of the species to the nearby Naejang National Park as its leave shape and autumn color are very similar to those of maple trees. The number of naturalized plants around the RFT industrial complex will increase with an increase in floating population, in human activities in association with constructions of factories and operations of the complex. The result of this study provides baseline data for assessing the ecological change of the region according to the operation of the RFT industrial complex

  6. Exotic plant species around Jeongeup Research Complex and RFT industrial complex

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jin Kyu; Cha, Min Kyoung; Ryu, Tae Ho; Lee, Yun Jong; Kim, Jin Hong [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup(Korea, Republic of)

    2015-08-15

    In Shinjeong-dong of Jeongeup, there are three government-supported research institutes and an RFT industrial complex which is currently being established. Increased human activities can affect flora and fauna as a man-made pressure onto the region. As a baseline study, status of exotic plants was investigated prior to a full operation of the RFT industrial complex. A total of 54 species and 1 variety of naturalized or introduced plants were found in the study area. Among them, three species (Ambrosia artemisifolia var. elatior, Rumex acetocella and Aster pilosus) belong to 'nuisance species', and four species (Phytolacca americana, Iopomoea hederacea, Ereechtites hieracifolia and Rudbeckia laciniata) to ‘monitor species’ designated by the ministry of Environment. Some of naturalized trees and plants were intentionally introduced in this area, while others naturally immigrated. Physalis angulata seems to immigrate in the study area in the form of mixture with animal feeds as its distribution coincided with the transportation route of the animal feeds. Liquidambar styraciflua is amenable to the ecological investigation on the possible expansion of the species to the nearby Naejang National Park as its leave shape and autumn color are very similar to those of maple trees. The number of naturalized plants around the RFT industrial complex will increase with an increase in floating population, in human activities in association with constructions of factories and operations of the complex. The result of this study provides baseline data for assessing the ecological change of the region according to the operation of the RFT industrial complex.

  7. Actinide colloid generation in groundwater

    International Nuclear Information System (INIS)

    Kim, J.I.

    1990-05-01

    The progress made in the investigation of actinide colloid generation in groundwaters is summarized and discussed with particular examples relevant to an understanding of the migration behaviour of actinides in natural aquifer systems. The first part deals with the characterization of colloids: groundwater colloids, actinide real-colloids and actinide pseudocolloids. The second part concentrates on the generation processes and migration behaviour of actinide pseudocolloids, which are discussed with some notable experimental examples. Importance is stressed more on the chemical aspects of the actinide colloid generation in groundwater. This work is a contribution to the CEC project MIRAGE II, particularly, to research area: complexation and colloids. (orig.)

  8. Embracing Complexity of Crop Phytobiomes with a Multidisciplinary Roadmap for Phytobiomes Research and an Industry-Academic Research Alliance

    Science.gov (United States)

    Eversole, K.

    2016-12-01

    To meet the demands of a global human population expected to exceed 9.6 billion by 2055, crop productivity in sustainable agricultural systems must improve considerably in the face of a steadily changing climate and increased biotic and abiotic stressors. Traditional agricultural sciences have relied mostly on research within individual disciplines and linear, reductionist approaches for crop improvement. While significant advancements have been made in developing and characterizing genetic and genomic resources for crops, we still have a very limited understanding of genotype by environment x management (GxExM) interactions that determine productivity, sustainability, quality, and the ability to withstand biotic and abiotic stressors. Embracing complexity and the non-linear organization and regulation of biological systems would enable a paradigm shift in breeding and crop production by allowing us to move towards a holistic, systems level approach that integrates a wide range of disciplines (e.g., geophysics, biology, agronomy, physiology, genomics, genetics, breeding, physics, pattern recognition, feedback loops, modeling, and engineering) and knowledge about crop phytobiomes (i.e., plants, their associated macro- and micro-organisms, and the geophysical environment of distinct geographical sites). By focusing on the phytobiome, we will be able to elucidate, quantify, model, predict, act, manipulate, and prevent and ultimately prescribe the cropping systems, methods, and management practices most suited for a particular farm, grassland, or forest. The recently released, multidisciplinary roadmap entitled Phytobiomes: A Roadmap for Research and Translation and the new International Alliance for Phytobiomes Research, an industry-academic consortium, will be presented.

  9. Applications of Novel Scintillators for Research and Industry 2016 (ANSRI 2016)

    International Nuclear Information System (INIS)

    2016-01-01

    In this volume of the Journal of Physics: Conference Series, we present the published proceedings from the '2 nd Workshop on the Applications of Novel Scintillators for Research and Industry (ANSRI).” This workshop was held from the 11-13 th of May, 2016, at University College Dublin, Ireland. The 12 proceedings from this meeting were all presented in oral or poster sessions. More details about this meeting, and the one before it, can be found on the workshop website at http://spacescience.ie/ansri2016/. The scientific program of the 2 nd ANSRI Workshop consisted of 7 invited seminars by world-renowned experts, 23 oral presentations and 6 poster presentations. The workshop was well attended by graduate and post-graduate students, post-docs and professors from academia, and junior staff scientists and researchers from industry. Participants from 14 countries attended the workshop, which covered a wide range of topics that characterise modern advances in the field of scintillator technology. The aim of this meeting was to establish a transfer of knowledge between researchers and industry experts from a wide range of application areas, in the dynamic field of scintillator technology. Moreover, the workshop also sought to help identify new pathways for future research, expanding upon existing networks and building upon current developments. This set of proceedings covers areas including the growth, production and characterisation of scintillators, along with their applications in various fields, which include: Gamma-ray Astronomy, Security and Defence, Beam monitoring, Nuclear Spectroscopy and Nuclear Astrophysics. On behalf of the Local and the Scientific Organising Committees of the 2 nd ANSRI Workshop, we are extremely grateful to all of the authors for providing us with details of their current research in these proceedings, and to the reviewers for their support. We would like to thank Professor Mark McConnell for giving a stimulating public talk during the

  10. [Incentives and disincentives for research and development of new drugs by the pharmaceutical industry].

    Science.gov (United States)

    Curcio, Pasqualina Curcio

    2008-10-01

    The authors present a model with factors that influence research and development decisions by the pharmaceutical industry: risk of disease transmission and possibility of control; case-fatality and the presence of cure or treatments; income; number of persons who demand the medicine; and opportunity costs for the company. Companies tend to invest in markets with inelastic demand (highly contagious diseases with no possibility of controlling transmission and/or very lethal diseases without treatment) and/or where there is a large population or high per capita income. Companies tend not to invest in markets where marginal costs exceed marginal income, particularly when costs increase permanently as a consequence of rising opportunity costs generated by foregoing profit in other markets. In such cases, policies to subsidize R&D are not effective, and policies must be orientated towards strengthening basic and applied research by public institutions.

  11. Recomendations concerning technical research and development with the purpose to industrially exploit marine algae

    Energy Technology Data Exchange (ETDEWEB)

    Hahn-Haegerdal, B.

    1980-10-01

    This report formulates a proposal for a program for technical research and development concerning use of Marine algae.The report is based on a retrospective literature search, an inquiry to potential algae users and producers in Sweden, visits to and correspondence with scientists and industries in Sweden and abroad. Technical research and development concerning marine algae is needed within the following fields: -Development of new sorts of algae offering resistance to parasite and disease adoptation to cultivation and har- vesting systems,and high-yielding concerning technically interesting components. -Development of suitable cultivation systems for Swedish conditions. -Co-cultivation of fish, mussels, oysters and crustaceans with algae. -Development of harvesting systems. -Methane rotting. -Fatty acid/hydrocarbon production as an alternative to methane rotting. -Physical-chemical properties of marine polysaccharides in relation to their technical properties. -Marine algae as fodder supplement.

  12. Aeronautics Education, Research, and Industry Alliance (AERIAL) Progress Report and Proposal for Funding Continuation NASA Nebraska EPSCoR

    Science.gov (United States)

    Bowen, Brent; Fink, Mary; Gogos, George; Moussavi, Massoum; Nickerson, Jocelyn; Rundquist, Donald; Russell, Valerie; Tarry, Scott

    2004-01-01

    The Aeronautics Education, Research, and Industry Alliance (AERIAL), which began as a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, has contributed substantially to the strategic research and technology priorities of NASA, while intensifying Nebraska's rapidly growing aeronautics research and development endeavors. AERIAL has enabled Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. Nebraska has placed emphasis on successfully securing additional funds from non-EPSCoR and non-NASA sources. AERIAL researchers have aggressively pursued additional funding opportunities offered by NASA, industry, and other agencies. This report contains a summary of AERIAL's activities and accomplishments during its first three years of implementation.

  13. Connoisseurship as a Substitute for User Research? The Case of the Swiss Watch Industry

    Directory of Open Access Journals (Sweden)

    Matthew Sinclair

    2015-12-01

    Full Text Available Conventional wisdom holds that new product development is more successfully undertaken when design is user-led. An exception is the luxury goods sector, in which a common presentation of the brand is one where the customer should aspire to the vision of its designers. In such cases, the proprietor is often cast as a connoisseur, an expert in the brand’s history who is intuitively able to give vision and direction. Within the Swiss luxury watch industry, heritage and the illusion of exclusivity are vital strategies in the communication of products as luxury items. Connoisseurship plays a central role in this communication, establishing the boundaries of brands whose products might otherwise appear similar. In such cases, connoisseurship is presented to the customer as superior to user research, engendering products with a sophistication which customer insights cannot provide. Nonetheless, whilst conventional user research methods play little part in the design of Swiss watches, less formal methods are employed. These are shown to also have application in non-luxury sectors too. The utilization of strategies employed by the Swiss watch industry in future scenarios of new product development is also discussed.

  14. Necessity for Industry-Academic Economic Geology Collaborations for Energy Critical Minerals Research and Development

    Science.gov (United States)

    Hitzman, M.

    2012-12-01

    Economic geology is a highly interdisciplinary field utilizing a diverse set of petrologic, geochemical, geophysical, and tectonic data for improved scientific understanding of element migration and concentration in the crust (ore formation). A number of elements that were once laboratory curiosities now figure prominently in new energy technologies (e.g. wind turbines, solar energy collectors). If widely deployed, such technologies have the capacity to transform the way we produce, transmit, store, and conserve energy. To meet domestic and worldwide renewable energy needs these systems must be scaled from laboratory, to demonstration, to widespread deployment. Such technologies are materials intensive. If widely deployed, the elements required by these technologies will be needed in significant quantities and shortage of these "energy critical elements" could significantly inhibit the adoption of otherwise game changing energy technologies. It is imperative to better understand the geology, metallurgy, and mining engineering of critical mineral deposits if we are to sustainably develop these new technologies. There is currently no consensus among federal and state agencies, the national and international mining industry, the public, and the U.S. academic community regarding the importance of economic geology to secure sufficient energy critical elements to undertake large-scale renewable energy development. Available federal funding for critical elements focuses on downstream areas such as metallurgy, substitutions, and recycling rather than primary deposits. Undertaking the required research to discover and mine critical element deposits in an environmentally friendly manner will require significant partnering with industry due to the current lack of federal research support.

  15. Marketing alcohol to young people: implications for industry regulation and research policy.

    Science.gov (United States)

    Jackson, M C; Hastings, G; Wheeler, C; Eadie, D; Mackintosh, A M

    2000-12-01

    This paper focuses on the marketing of alcohol to young people in the United Kingdom, but the lessons that emerge have international significance. Alcohol is a global enterprise and recent consolidation means that it is controlled by a decreasing number of expanding multi-nationals. Alcohol companies are able to allocate significant resources to researching consumer preferences, developing new products and promoting them on an international level. Recent years have seen a growth in the value that youth culture attaches to brand labels and symbols and a move away from the healthy-living ethos. The alcohol industry's response to these trends has been to design alcoholic beverages that appeal to young people, using well-informed and precisely targeted marketing strategies. This has led to growing concerns about the implications for public health and a demand for tighter controls to regulate alcohol marketing practices. In the United Kingdom, controls on alcohol are piecemeal and reactive and the current system of voluntary regulation appears ineffective. This paper argues for more research to establish current industry practice and inform the development of a comprehensive regulatory structure and system of monitoring.

  16. Health technology assessment and comparative effectiveness research: a pharmaceutical industry perspective.

    Science.gov (United States)

    Hao, Yanni; Thomas, Adrian

    2013-08-01

    We briefly review the characteristics of several established health technology assessment (HTA) programs in industrialized societies including Germany, the UK and France. Special attention is paid on two issues: the position of HTA in coverage decision making and the role of economic assessment in evaluation processes. Although law makers in the USA have barred the use of NICE's cost/quality-adjusted life year or similar health economics approaches by public payers for coverage decision making, there are suggestions of prioritizing relative efficacy evaluation over economic assessment under a comparative effectiveness research (CER) framework to inform payment rates of public payers (an approach similar to German and French HTA processes). However, such an approach is unlikely to prove viable. It should also be noted that, if cost considerations are made explicit in US CER policy decisions, CER may become an unsustainable approach undermined by a conflicting emphasis on both cost containment and a demand for costly comparative evidence. On the other hand, properly designed CER initiatives can serve as a facilitator of more efficient research activities and drug development models. With these points in mind, the likely pathway of US CER is explored and the plausible impact on industry innovation is discussed.

  17. Mapping the Use of Engineered NM in Quebec's Industries and Research Laboratories

    International Nuclear Information System (INIS)

    Ostiguy, Claude; Emond, Claude; Dossa, Inès; Plavski, Anton; Malki, Yasmina; Boily, Chantale; Roughley, David; Endo, Charles-Anica

    2013-01-01

    Engineered NanoMaterials (NM) offer an opportunity to develop a wide variety of new products with unique properties but many studies have shown potential OHS risks specific to NM. Addressing these risks requires knowledge about release of NM into the workplaces. This research aimed to map the state of nanotechnology OHS practices in Quebec through a questionnaire following a first contact by telephone when possible and by compiling the type and volumes of NM used as well as gathering information related to the working conditions and OHS aspects. This survey was conducted among 1310 Quebec industries and 653 researchers working in different specialties potentially involved in the development/production/distribution/integration of NM and use of NM containing products. Overall, 90 questionnaires, including 51 from the industries, were completed. These showed that NM are mainly used into the powder form, in many different sectors and deserve a wide range of markets. The prevention measures implemented vary widely from a workplace to another but about one third of the participants report that they have implemented NP adapted prevention measures but they remain worried on some specific operations. More than 50% of the participants request more information about the safe laboratory/plant design, toxicity, regulation, good work practices and prevention measures, efficiency of personal protective equipment and environmental impacts.

  18. Mapping the Use of Engineered NM in Quebec's Industries and Research Laboratories

    Science.gov (United States)

    Ostiguy, Claude; Emond, Claude; Dossa, Inès; Malki, Yasmina; Boily, Chantale; Roughley, David; Plavski, Anton; Endo, Charles-Anica

    2013-04-01

    Engineered NanoMaterials (NM) offer an opportunity to develop a wide variety of new products with unique properties but many studies have shown potential OHS risks specific to NM. Addressing these risks requires knowledge about release of NM into the workplaces. This research aimed to map the state of nanotechnology OHS practices in Quebec through a questionnaire following a first contact by telephone when possible and by compiling the type and volumes of NM used as well as gathering information related to the working conditions and OHS aspects. This survey was conducted among 1310 Quebec industries and 653 researchers working in different specialties potentially involved in the development/production/distribution/integration of NM and use of NM containing products. Overall, 90 questionnaires, including 51 from the industries, were completed. These showed that NM are mainly used into the powder form, in many different sectors and deserve a wide range of markets. The prevention measures implemented vary widely from a workplace to another but about one third of the participants report that they have implemented NP adapted prevention measures but they remain worried on some specific operations. More than 50% of the participants request more information about the safe laboratory/plant design, toxicity, regulation, good work practices and prevention measures, efficiency of personal protective equipment and environmental impacts.

  19. Secret science: tobacco industry research on smoking behaviour and cigarette toxicity.

    Science.gov (United States)

    Hammond, David; Collishaw, Neil E; Callard, Cynthia

    2006-03-04

    A lack of scientific data remains the principal obstacle to regulating cigarette toxicity. In particular, there is an immediate need to improve our understanding of the interaction between smoking behaviour and product design, and its influence on cigarette deliveries. This article reviews internal tobacco industry documents on smoking behaviour research undertaken by Imperial Tobacco Limited (ITL) and British-American Tobacco (BAT). BAT documents indicate that smokers vary their puffing behaviour to regulate nicotine levels and compensate for low-yield cigarettes by smoking them more intensely. BAT research also shows that the tar and nicotine delivered to smokers is substantially greater than the machine-smoked yields reported to consumers and regulators. Internal documents describe a strategy to maximise this discrepancy through product design. In particular, BAT developed elastic cigarettes that produced low yields under standard testing protocols, whereas in consumers' hands they elicited more intensive smoking and provided higher concentrations of tar and nicotine to smokers. Documents also show that BAT pursued this product strategy despite the health risks to consumers and ethical concerns raised by senior scientists, and paired it with an equally successful marketing campaign that promoted these cigarettes as low-tar alternatives for health-concerned smokers. Overall, the documents seem to reveal a product strategy intended to exploit the limitations of the testing protocols and to intentionally conceal from consumers and regulators the potential toxicity of BAT products revealed by BAT's own research. Tobacco industry research underscores the serious limitations of the current cigarette testing protocols and the documents describe deceptive business practices that remain in place.

  20. Industry 4.0 implies lean manufacturing: research activities in industry 4.0 function as enablers for lean manufacturing

    OpenAIRE

    Sanders, Adam; Elangeswaran, Chola; Wulfsberg, Jens

    2016-01-01

    Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industr...