Sample records for industry comparability protocols
-
Industrial wireless sensor networks applications, protocols, and standards
Güngör, V Çagri
2013-01-01
The collaborative nature of industrial wireless sensor networks (IWSNs) brings several advantages over traditional wired industrial monitoring and control systems, including self-organization, rapid deployment, flexibility, and inherent intelligent processing. In this regard, IWSNs play a vital role in creating more reliable, efficient, and productive industrial systems, thus improving companies' competitiveness in the marketplace. Industrial Wireless Sensor Networks: Applications, Protocols, and Standards examines the current state of the art in industrial wireless sensor networks and outline
-
Redactions in protocols for drug trials: what industry sponsors concealed.
Marquardsen, Mikkel; Ogden, Michelle; Gøtzsche, Peter C
2018-04-01
Objective To describe the redactions in contemporary protocols for industry-sponsored randomised drug trials with patient relevant outcomes and to evaluate whether there was a legitimate rationale for the redactions. Design Cohort study. Under the Freedom of Information Act, we requested access to trial protocols approved by a research ethics committee in Denmark from October 2012 to March 2013. We received 17 consecutive protocols, which had been redacted before we got them, and nine protocols without redactions. In five additional cases, the companies refused to let the committees give us access, and in three other cases, documents were missing. Participants Not applicable. Setting Not applicable. Main outcome measure Amount and nature of redactions in 22 predefined key protocol variables. Results The redactions were most widespread in those sections of the protocol where there is empirical evidence of substantial problems with the trustworthiness of published drug trials: data analysis, handling of missing data, detection and analysis of adverse events, definition of the outcomes, interim analyses and premature termination of the study, sponsor's access to incoming data while the study is running, ownership to the data and investigators' publication rights. The parts of the text that were redacted differed widely, both between companies and within the same company. Conclusions We could not identify any legitimate rationale for the redactions. The current mistrust in industry-sponsored drug trials can only change if the industry offers unconditional access to its trial protocols and other relevant documents and data.
-
Data exchange technology based on handshake protocol for industrial automation system
Astafiev, A. V.; Shardin, T. O.
2018-05-01
In the article, questions of data exchange technology based on the handshake protocol for industrial automation system are considered. The methods of organizing the technology in client-server applications are analyzed. In the process of work, the main threats of client-server applications that arise during the information interaction of users are indicated. Also, a comparative analysis of analogue systems was carried out, as a result of which the most suitable option was chosen for further use. The basic schemes for the operation of the handshake protocol are shown, as well as the general scheme of the implemented application, which describes the entire process of interaction between the client and the server.
-
On BAN logics for industrial security protocols
Agray, N.; Hoek, van der W.; Vink, de E.P.; Dunin-Keplicz, B.; Nawarecki, E.
2002-01-01
This paper reports on two case-studies of applying BAN logic to industrial strength security protocols. These studies demonstrate the flexibility of the BAN language, as it caters for the addition of appropriate constructs and rules. We argue that, although a semantical foundation of the formalism
-
International Nuclear Information System (INIS)
Lixon, Benoit; Thomassin, Paul J.; Hamaide, Bertrand
2008-01-01
The objective of this paper is to assess the economic impacts of reducing greenhouse gas emissions by decreasing industrial output in Canada to a level that will meet the target set out in the Kyoto Protocol. The study uses an ecological-economic Input-Output model combining economic components valued in monetary terms with ecologic components - GHG emissions - expressed in physical terms. Economic and greenhouse gas emissions data for Canada are computed in the same sectoral disaggregation. Three policy scenarios are considered: the first one uses the direct emission coefficients to allocate the reduction in industrial output, while the other two use the direct plus indirect emission coefficients. In the first two scenarios, the reduction in industrial sector output is allocated uniformly across sectors while it is allocated to the 12 largest emitting industries in the last one. The estimated impacts indicate that the results vary with the different allocation methods. The third policy scenario, allocation to the 12 largest emitting sectors, is the most cost effective of the three as the impacts of the Kyoto Protocol reduces Gross Domestic Product by 3.1% compared to 24% and 8.1% in the first two scenarios. Computed economic costs should be considered as upper-bounds because the model assumes immediate adjustment to the Kyoto Protocol and because flexibility mechanisms are not incorporated. The resulting upper-bound impact of the third scenario may seem to contradict those who claim that the Kyoto Protocol would place an unbearable burden on the Canadian economy. (author)
-
Access Protocol For An Industrial Optical Fibre LAN
Senior, John M.; Walker, William M.; Ryley, Alan
1987-09-01
A structure for OSI levels 1 and 2 of a local area network suitable for use in a variety of industrial environments is reported. It is intended that the LAN will utilise optical fibre technology at the physical level and a hybrid of dynamically optimisable token passing and CSMA/CD techniques at the data link (IEEE 802 medium access control - logical link control) level. An intelligent token passing algorithm is employed which dynamically allocates tokens according to the known upper limits on the requirements of each device. In addition a system of stochastic tokens is used to increase efficiency when the stochastic traffic is significant. The protocol also allows user-defined priority systems to be employed and is suitable for distributed or centralised implementation. The results of computer simulated performance characteristics for the protocol using a star-ring topology are reported which demonstrate its ability to perform efficiently with the device and traffic loads anticipated within an industrial environment.
-
Application Filters for TCP/IP Industrial Automation Protocols
Batista, Aguinaldo B.; Kobayashi, Tiago H.; Medeiros, João Paulo S.; Brito, Agostinho M.; Motta Pires, Paulo S.
The use of firewalls is a common approach usually meant to secure Automation Technology (AT) from Information Technology (TI) networks. This work proposes a filtering system for TCP/IP-based automation networks in which only certain kind of industrial traffic is permitted. All network traffic which does not conform with a proper industrial protocol pattern or with specific rules for its actions is supposed to be abnormal and must be blocked. As a case study, we developed a seventh layer firewall application with the ability of blocking spurious traffic, using an IP packet queueing engine and a regular expression library.
-
Directory of Open Access Journals (Sweden)
Benjamin Kasenda
2016-06-01
Full Text Available Little is known about publication agreements between industry and academic investigators in trial protocols and the consistency of these agreements with corresponding statements in publications. We aimed to investigate (i the existence and types of publication agreements in trial protocols, (ii the completeness and consistency of the reporting of these agreements in subsequent publications, and (iii the frequency of co-authorship by industry employees.We used a retrospective cohort of randomized clinical trials (RCTs based on archived protocols approved by six research ethics committees between 13 January 2000 and 25 November 2003. Only RCTs with industry involvement were eligible. We investigated the documentation of publication agreements in RCT protocols and statements in corresponding journal publications. Of 647 eligible RCT protocols, 456 (70.5% mentioned an agreement regarding publication of results. Of these 456, 393 (86.2% documented an industry partner's right to disapprove or at least review proposed manuscripts; 39 (8.6% agreements were without constraints of publication. The remaining 24 (5.3% protocols referred to separate agreement documents not accessible to us. Of those 432 protocols with an accessible publication agreement, 268 (62.0% trials were published. Most agreements documented in the protocol were not reported in the subsequent publication (197/268 [73.5%]. Of 71 agreements reported in publications, 52 (73.2% were concordant with those documented in the protocol. In 14 of 37 (37.8% publications in which statements suggested unrestricted publication rights, at least one co-author was an industry employee. In 25 protocol-publication pairs, author statements in publications suggested no constraints, but 18 corresponding protocols documented restricting agreements.Publication agreements constraining academic authors' independence are common. Journal articles seldom report on publication agreements, and, if they do
-
Kasenda, Benjamin; von Elm, Erik; You, John J.; Tomonaga, Yuki; Saccilotto, Ramon; Amstutz, Alain; Bengough, Theresa; Meerpohl, Joerg J.; Stegert, Mihaela; Olu, Kelechi K.; Tikkinen, Kari A. O.; Neumann, Ignacio; Carrasco-Labra, Alonso; Faulhaber, Markus; Mulla, Sohail M.; Mertz, Dominik; Akl, Elie A.; Bassler, Dirk; Busse, Jason W.; Nordmann, Alain; Gloy, Viktoria; Ebrahim, Shanil; Schandelmaier, Stefan; Sun, Xin; Vandvik, Per O.; Johnston, Bradley C.; Walter, Martin A.; Burnand, Bernard; Hemkens, Lars G.; Bucher, Heiner C.; Guyatt, Gordon H.; Briel, Matthias
2016-01-01
Background Little is known about publication agreements between industry and academic investigators in trial protocols and the consistency of these agreements with corresponding statements in publications. We aimed to investigate (i) the existence and types of publication agreements in trial protocols, (ii) the completeness and consistency of the reporting of these agreements in subsequent publications, and (iii) the frequency of co-authorship by industry employees. Methods and Findings We used a retrospective cohort of randomized clinical trials (RCTs) based on archived protocols approved by six research ethics committees between 13 January 2000 and 25 November 2003. Only RCTs with industry involvement were eligible. We investigated the documentation of publication agreements in RCT protocols and statements in corresponding journal publications. Of 647 eligible RCT protocols, 456 (70.5%) mentioned an agreement regarding publication of results. Of these 456, 393 (86.2%) documented an industry partner’s right to disapprove or at least review proposed manuscripts; 39 (8.6%) agreements were without constraints of publication. The remaining 24 (5.3%) protocols referred to separate agreement documents not accessible to us. Of those 432 protocols with an accessible publication agreement, 268 (62.0%) trials were published. Most agreements documented in the protocol were not reported in the subsequent publication (197/268 [73.5%]). Of 71 agreements reported in publications, 52 (73.2%) were concordant with those documented in the protocol. In 14 of 37 (37.8%) publications in which statements suggested unrestricted publication rights, at least one co-author was an industry employee. In 25 protocol-publication pairs, author statements in publications suggested no constraints, but 18 corresponding protocols documented restricting agreements. Conclusions Publication agreements constraining academic authors’ independence are common. Journal articles seldom report on
-
Energy Technology Data Exchange (ETDEWEB)
Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Gowans, Dakers [Left Fork Energy, Harrison, NY (United States); Telarico, Chad [DNV GL, Mahwah, NJ (United States)
2017-11-02
The Commercial and Industrial Lighting Evaluation Protocol (the protocol) describes methods to account for gross energy savings resulting from the programmatic installation of efficient lighting equipment in large populations of commercial, industrial, and other nonresidential facilities. This protocol does not address savings resulting from changes in codes and standards, or from education and training activities. A separate Uniform Methods Project (UMP) protocol, Chapter 3: Commercial and Industrial Lighting Controls Evaluation Protocol, addresses methods for evaluating savings resulting from lighting control measures such as adding time clocks, tuning energy management system commands, and adding occupancy sensors.
-
Mac protocols for wireless sensor network (wsn): a comparative study
International Nuclear Information System (INIS)
Arshad, J.; Akram, Q.; Saleem, Y.
2014-01-01
Data communication between nodes is carried out under Medium Access Control (MAC) protocol which is defined at data link layer. The MAC protocols are responsible to communicate and coordinate between nodes according to the defined standards in WSN (Wireless Sensor Networks). The design of a MAC protocol should also address the issues of energy efficiency and transmission efficiency. There are number of MAC protocols that exist in the literature proposed for WSN. In this paper, nine MAC protocols which includes S-MAC, T-MAC, Wise-MAC, Mu-MAC, Z-MAC, A-MAC, D-MAC, B-MAC and B-MAC+ for WSN have been explored, studied and analyzed. These nine protocols are classified in contention based and hybrid (combination of contention and schedule based) MAC protocols. The goal of this comparative study is to provide a basis for MAC protocols and to highlight different mechanisms used with respect to parameters for the evaluation of energy and transmission efficiency in WSN. This study also aims to give reader a better understanding of the concepts, processes and flow of information used in these MAC protocols for WSN. A comparison with respect to energy reservation scheme, idle listening avoidance, latency, fairness, data synchronization, and throughput maximization has been presented. It was analyzed that contention based MAC protocols are less energy efficient as compared to hybrid MAC protocols. From the analysis of contention based MAC protocols in term of energy consumption, it was being observed that protocols based on preamble sampling consume lesser energy than protocols based on static or dynamic sleep schedule. (author)
-
Remote control of the industry processes. POWERLINK protocol application
Wóbel, A.; Paruzel, D.; Paszkiewicz, B.
2017-08-01
The present technological development enables the use of solutions characterized by a lower failure rate, and work with greater precision. This allows you to obtain the most efficient production, high speed production and reliability of individual components. The main scope of this article was POWERLINK protocol application for communication with the controller B & R through communication Ethernet for recording process parameters. This enables control of run production cycle using an internal network connected to the PC industry. Knowledge of the most important parameters of the production in real time allows detecting of a failure immediately after occurrence. For this purpose, the position of diagnostic use driver X20CP1301 B&R to record measurement data such as pressure, temperature valve between the parties and the torque required to change the valve setting was made. The use of POWERLINK protocol allows for the transmission of information on the status of every 200 μs.
-
The use of participant-observation protocol in an industrial engineering research.
Silveira e Silva, Renato da; Sznelwar, Laerte Idal; D'Afonseca e Silva, Victor
2012-01-01
Based on literature, this article aims to present the "participant-observation' research protocol, and its practical application in the industrial engineering field, more specifically within the area of design development, and in the case shown by this article, of interiors' design. The main target is to identify the concept of the method, i.e., from its characteristics to structure a general sense about the subject, so that the protocol can be used in different areas of knowledge, especially those ones which are committed with the scientific research involving the expertise from researchers, and subjective feelings and opinions of the users of an engineering product, and how this knowledge can be benefic for product design, contributing since the earliest stage of design.
-
Comparative Study on Various Authentication Protocols in Wireless Sensor Networks.
Rajeswari, S Raja; Seenivasagam, V
2016-01-01
Wireless sensor networks (WSNs) consist of lightweight devices with low cost, low power, and short-ranged wireless communication. The sensors can communicate with each other to form a network. In WSNs, broadcast transmission is widely used along with the maximum usage of wireless networks and their applications. Hence, it has become crucial to authenticate broadcast messages. Key management is also an active research topic in WSNs. Several key management schemes have been introduced, and their benefits are not recognized in a specific WSN application. Security services are vital for ensuring the integrity, authenticity, and confidentiality of the critical information. Therefore, the authentication mechanisms are required to support these security services and to be resilient to distinct attacks. Various authentication protocols such as key management protocols, lightweight authentication protocols, and broadcast authentication protocols are compared and analyzed for all secure transmission applications. The major goal of this survey is to compare and find out the appropriate protocol for further research. Moreover, the comparisons between various authentication techniques are also illustrated.
-
Comparative Study on Various Authentication Protocols in Wireless Sensor Networks
Rajeswari, S. Raja; Seenivasagam, V.
2016-01-01
Wireless sensor networks (WSNs) consist of lightweight devices with low cost, low power, and short-ranged wireless communication. The sensors can communicate with each other to form a network. In WSNs, broadcast transmission is widely used along with the maximum usage of wireless networks and their applications. Hence, it has become crucial to authenticate broadcast messages. Key management is also an active research topic in WSNs. Several key management schemes have been introduced, and their benefits are not recognized in a specific WSN application. Security services are vital for ensuring the integrity, authenticity, and confidentiality of the critical information. Therefore, the authentication mechanisms are required to support these security services and to be resilient to distinct attacks. Various authentication protocols such as key management protocols, lightweight authentication protocols, and broadcast authentication protocols are compared and analyzed for all secure transmission applications. The major goal of this survey is to compare and find out the appropriate protocol for further research. Moreover, the comparisons between various authentication techniques are also illustrated. PMID:26881272
-
International Nuclear Information System (INIS)
Phaner-Goutorbe, Magali; Dugas, Vincent; Chevolot, Yann; Souteyrand, Eliane
2011-01-01
Surface immobilization of oligonucleotide probes (oligoprobes) is a key issue in the development of DNA-chips. The immobilization protocol should guarantee good availability of the probes, low non-specific adsorption and reproducibility. We have previously reported a silanization protocol with tert-butyl-11-(dimethylamino)silylundecanoate performed by impregnation (Impregnation Protocol, IP) of silica substrates from dilute silane solutions, leading to surfaces bearing carboxylic groups. In this paper, the Impregnation protocol is compared with a Gas phase Protocol (GP) which is more suited to industrial requirements such as reliable and robust processing, cost efficiency, etc.... The morphology of the oligoprobe films at the nanoscale (characterized by Atomic Force Microscopy) and the reproducibility of subsequent oligoprobes immobilization steps have been investigated for the two protocols on thermal silica (Si/SiO 2 ) and glass slide substrates. IP leads to smooth surfaces whereas GP induces the formation of islands features suggesting a non-continuous silane layer. The reproducibility of the overall surface layer (18.75 mm 2 ) has been evaluated through the covalent immobilization of a fluorescent oligoprobes. Average fluorescent signals of 6 (a.u.) and 4 (a.u.) were observed for IP and GP, respectively, with a standard deviation of 1 for both protocols. Thus, despite a morphological difference of the silane layer at the nanometer scale, the density of the immobilized probes remained similar.
-
Canada's nuclear industry, greenhouse gas emissions, and the Kyoto Protocol
International Nuclear Information System (INIS)
Pendergast, D.R.; Duffey, R.B.; Tregunno, D.
1998-01-01
The Kyoto Protocol of the United Nations Framework Convention on Climate change, dated December 10, 1997 committed Canada to reduce greenhouse gases to 6% below 1990 levels by 2008-2012. Other nations also committed to varying degrees of reduction. The Protocol includes provisions for credit to the 'developed' counties for initiatives which lead to greenhouse gas reduction in the 'developing' countries and for the sharing of credit between 'developed' countries for projects undertaken jointly. The rules and details for implementation of these guidelines remain to be negotiated. We begin our study by establishing the magnitude of greenhouse gas emissions already avoided by the nuclear industry in Canada since the inception of commercial power plants in 1971. We then review projections of energy use in Canada and anticipated increase in electricity use up to the year 2020. These studies have anticipated no (or have 'not permitted') further development of nuclear electricity production in spite of the clear benefit with respect to greenhouse gas emission. The studies also predict a relatively small growth of electricity use. In fact the projections indicate a reversal of a trend toward increased per capita electricity use which is contrary to observations of electricity usage in national economies as they develop. We then provide estimates of the magnitude of greenhouse gas reduction which would result from replacing the projected increase in fossil fuel electricity by nuclear generation through the building of more plants and/or making better use of existing installations. This is followed by an estimate of additional nuclear capacity needed to avoid CO 2 emissions while providing the electricity needed should per capita usage remain constant. Canada's greenhouse gas reduction goal is a small fraction of international commitments. The Kyoto agreement's 'flexibility mechanism' provisions provide some expectation that Canada could obtain some credit for greenhouse gas
-
Energy Technology Data Exchange (ETDEWEB)
Kurnik, Charles W. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Carlson, Stephen [DNV GL, Madison, WI (United States)
2017-10-04
This Commercial and Industrial Lighting Controls Evaluation Protocol (the protocol) describes methods to account for energy savings resulting from programmatic installation of lighting control equipment in large populations of commercial, industrial, government, institutional, and other nonresidential facilities. This protocol does not address savings resulting from changes in codes and standards, or from education and training activities. When lighting controls are installed in conjunction with a lighting retrofit project, the lighting control savings must be calculated parametrically with the lighting retrofit project so savings are not double counted.
-
Cyber Security in Industrial Control Systems and SCADA Applications: Modbus TCP Protocol Example
Directory of Open Access Journals (Sweden)
Erdal IRMAK
2017-12-01
Full Text Available Electrical energy generation, transmission and distribution systems are evaluated in terms of national security dimension and defined as critical infrastructures. Monitoring and controlling of these systems is provided by Industrial Control Systems (ICS or Supervisory Control and Data Acquisition (SCADA systems. According to the latest advances in communication and internet technology, ICS/SCADA systems have started to become integrated with these systems. As a result of this situation, current or existing vulnerabilities in information and communication technology affect to SCADA systems directly. Therefore, this paper focuses on the cyber security of ICS/SCADA systems. It has been proved that the lack of authentication detected in Modbus TCP protocol, one of the most used in ICS/SCADA systems, can be exploited. In order to solve this security issue, a software is developed using the Python programming language for blocking or mitigating the cyber attacks. The proposed solution is subjected to several tests and results show that the attacks can be prevented successfully. Thus, it is considered that the proposed work will contribute to the security of ICS/SCADA systems and the industrial protocols using for communicating these systems.
-
A Comparative Study of Wireless Sensor Networks and Their Routing Protocols
Directory of Open Access Journals (Sweden)
Subhajit Pal
2010-11-01
Full Text Available Recent developments in the area of micro-sensor devices have accelerated advances in the sensor networks field leading to many new protocols specifically designed for wireless sensor networks (WSNs. Wireless sensor networks with hundreds to thousands of sensor nodes can gather information from an unattended location and transmit the gathered data to a particular user, depending on the application. These sensor nodes have some constraints due to their limited energy, storage capacity and computing power. Data are routed from one node to other using different routing protocols. There are a number of routing protocols for wireless sensor networks. In this review article, we discuss the architecture of wireless sensor networks. Further, we categorize the routing protocols according to some key factors and summarize their mode of operation. Finally, we provide a comparative study on these various protocols.
-
The downstream industry compared to market
International Nuclear Information System (INIS)
Chevallier, B.
2010-01-01
J.L. Schilansky introduces here the difficult question of the downstream industry compared to market in recalling the recent structural changes (behaviour of customers, behaviour of the USA- and China-governments), the increase of the European and French regulations, the climatic change and the conjectural impact of the crisis on the refining industry. (O.M.)
-
Emulation of Industrial Control Field Device Protocols
2013-03-01
today. The protocol operates at the application layer of the open systems interconnection ( OSI ) model, meaning it operates independently of the...the OSI model. Their job is to receive serial data from an MTU in the Modbus RTU or ASCII protocol, encapsulate and transmit the data to another modem...facing connection and out-of-band logging capabilities over the other LAN -facing connection. Despite the fact that the hardware configuration of the
-
A Study of Comparative Advantage and Intra-Industry Trade in the Pharmaceutical Industry of Iran.
Yusefzadeh, Hassan; Rezapour, Aziz; Lotfi, Farhad; Ebadifard Azar, Farbod; Nabilo, Bahram; Abolghasem Gorji, Hassan; Hadian, Mohammad; Shahidisadeghi, Niusha; Karami, Atiyeh
2015-04-23
Drug costs in Iran accounts for about 30% of the total health care expenditure. Moreover, pharmaceutical business lies among the world's greatest businesses. The aim of this study was to analyze Iran's comparative advantage and intra-industry trade in pharmaceuticals so that suitable policies can be developed and implemented in order to boost Iran's trade in this field. To identify Iran's comparative advantage in pharmaceuticals, trade specialization, export propensity, import penetration and Balassa and Vollrath indexes were calculated and the results were compared with other pharmaceutical exporting countries. The extent and growth of Iran's intra-industry trade in pharmaceuticals were measured and evaluated using the Grubel-Lloyd and Menon-Dixon indexes. The required data was obtained from Iran's Customs Administration, Iran's pharmaceutical Statistics, World Bank and International Trade Center. The results showed that among pharmaceutical exporting countries, Iran has a high level of comparative disadvantage in pharmaceutical products because it holds a small share in world's total pharmaceutical exports. Also, the low extent of bilateral intra-industry trade between Iran and its trading partners in pharmaceuticals shows the trading model of Iran's pharmaceutical industry is mostly inter-industry trade rather than intra-industry trade. In addition, the growth of Iran's intra-industry trade in pharmaceuticals is due to its shares of imports from pharmaceutical exporting countries to Iran and exports from Iran to its neighboring countries. The results of the analysis can play a valuable role in helping pharmaceutical companies and policy makers to boost pharmaceutical trade.
-
A Study of Comparative Advantage and Intra-Industry Trade in the Pharmaceutical Industry of Iran
Yusefzadeh, Hassan; Rezapour, Aziz; Lotfi, Farhad; Azar, Farbod Ebadifard; Nabilo, Bahram; Gorji, Hassan Abolghasem; Hadian, Mohammad; Shahidisadeghi, Niusha; Karami, Atiyeh
2015-01-01
Background: Drug costs in Iran accounts for about 30% of the total health care expenditure. Moreover, pharmaceutical business lies among the world’s greatest businesses. The aim of this study was to analyze Iran’s comparative advantage and intra-industry trade in pharmaceuticals so that suitable policies can be developed and implemented in order to boost Iran’s trade in this field. Methods: To identify Iran’s comparative advantage in pharmaceuticals, trade specialization, export propensity, import penetration and Balassa and Vollrath indexes were calculated and the results were compared with other pharmaceutical exporting countries. The extent and growth of Iran’s intra-industry trade in pharmaceuticals were measured and evaluated using the Grubel-Lloyd and Menon-Dixon indexes. The required data was obtained from Iran’s Customs Administration, Iran’s pharmaceutical Statistics, World Bank and International Trade Center. Results: The results showed that among pharmaceutical exporting countries, Iran has a high level of comparative disadvantage in pharmaceutical products because it holds a small share in world’s total pharmaceutical exports. Also, the low extent of bilateral intra-industry trade between Iran and its trading partners in pharmaceuticals shows the trading model of Iran’s pharmaceutical industry is mostly inter-industry trade rather than intra-industry trade. In addition, the growth of Iran’s intra-industry trade in pharmaceuticals is due to its shares of imports from pharmaceutical exporting countries to Iran and exports from Iran to its neighboring countries. Conclusions: The results of the analysis can play a valuable role in helping pharmaceutical companies and policy makers to boost pharmaceutical trade. PMID:26153184
-
In silico toxicology protocols.
Myatt, Glenn J; Ahlberg, Ernst; Akahori, Yumi; Allen, David; Amberg, Alexander; Anger, Lennart T; Aptula, Aynur; Auerbach, Scott; Beilke, Lisa; Bellion, Phillip; Benigni, Romualdo; Bercu, Joel; Booth, Ewan D; Bower, Dave; Brigo, Alessandro; Burden, Natalie; Cammerer, Zoryana; Cronin, Mark T D; Cross, Kevin P; Custer, Laura; Dettwiler, Magdalena; Dobo, Krista; Ford, Kevin A; Fortin, Marie C; Gad-McDonald, Samantha E; Gellatly, Nichola; Gervais, Véronique; Glover, Kyle P; Glowienke, Susanne; Van Gompel, Jacky; Gutsell, Steve; Hardy, Barry; Harvey, James S; Hillegass, Jedd; Honma, Masamitsu; Hsieh, Jui-Hua; Hsu, Chia-Wen; Hughes, Kathy; Johnson, Candice; Jolly, Robert; Jones, David; Kemper, Ray; Kenyon, Michelle O; Kim, Marlene T; Kruhlak, Naomi L; Kulkarni, Sunil A; Kümmerer, Klaus; Leavitt, Penny; Majer, Bernhard; Masten, Scott; Miller, Scott; Moser, Janet; Mumtaz, Moiz; Muster, Wolfgang; Neilson, Louise; Oprea, Tudor I; Patlewicz, Grace; Paulino, Alexandre; Lo Piparo, Elena; Powley, Mark; Quigley, Donald P; Reddy, M Vijayaraj; Richarz, Andrea-Nicole; Ruiz, Patricia; Schilter, Benoit; Serafimova, Rositsa; Simpson, Wendy; Stavitskaya, Lidiya; Stidl, Reinhard; Suarez-Rodriguez, Diana; Szabo, David T; Teasdale, Andrew; Trejo-Martin, Alejandra; Valentin, Jean-Pierre; Vuorinen, Anna; Wall, Brian A; Watts, Pete; White, Angela T; Wichard, Joerg; Witt, Kristine L; Woolley, Adam; Woolley, David; Zwickl, Craig; Hasselgren, Catrin
2018-04-17
The present publication surveys several applications of in silico (i.e., computational) toxicology approaches across different industries and institutions. It highlights the need to develop standardized protocols when conducting toxicity-related predictions. This contribution articulates the information needed for protocols to support in silico predictions for major toxicological endpoints of concern (e.g., genetic toxicity, carcinogenicity, acute toxicity, reproductive toxicity, developmental toxicity) across several industries and regulatory bodies. Such novel in silico toxicology (IST) protocols, when fully developed and implemented, will ensure in silico toxicological assessments are performed and evaluated in a consistent, reproducible, and well-documented manner across industries and regulatory bodies to support wider uptake and acceptance of the approaches. The development of IST protocols is an initiative developed through a collaboration among an international consortium to reflect the state-of-the-art in in silico toxicology for hazard identification and characterization. A general outline for describing the development of such protocols is included and it is based on in silico predictions and/or available experimental data for a defined series of relevant toxicological effects or mechanisms. The publication presents a novel approach for determining the reliability of in silico predictions alongside experimental data. In addition, we discuss how to determine the level of confidence in the assessment based on the relevance and reliability of the information. Copyright © 2018. Published by Elsevier Inc.
-
The textile and clothing industry in the Danube region countries: Comparative advantages
Directory of Open Access Journals (Sweden)
Ignjatijević Svetlana
2016-01-01
Full Text Available The subject of this study is the analysis of comparative advantages of international export in the TC (textile and clothing industry of the Danube region countries with a special focus on Serbia. The aim of this study is to analyze the comparative advantage and suggest possible economic and legal measures to strengthen export. This study observed export per capita and participation of TC industry export, and measured the comparative advantage and specialization of the Danube region countries in the period between 2005 and 2013. In the course of research, we used the Balassa (RCA and Lafay (LFI indexes of comparative advantage, and the GL index and RUV index of horizontal and vertical specialization in intra-industry exchange. The research has revealed positive comparative advantage in the export of the textile industry in the Czech Republic, Germany and Slovenia. In the clothing industry export, positive comparative advantage was revealed in the cases of: Bulgaria, Hungary, Moldova, Romania, Slovakia and Serbia. The research has shown a positive comparative advantage of the TC industry sector in Serbia. The results of our research into the TC industry reveal the existence of correlation between comparative advantage and intra-industry specialization in international trade.
-
Monotone Comparative Statics for the Industry Composition
DEFF Research Database (Denmark)
Laugesen, Anders Rosenstand; Bache, Peter Arendorf
2015-01-01
We let heterogeneous firms face decisions on a number of complementary activities in a monopolistically-competitive industry. The endogenous level of competition and selection regarding entry and exit of firms introduces a wedge between monotone comparative statics (MCS) at the firm level and MCS...... for the industry composition. The latter phenomenon is defined as first-order stochastic dominance shifts in the equilibrium distributions of all activities across active firms. We provide sufficient conditions for MCS at both levels of analysis and show that we may have either type of MCS without the other...
-
Carpinella, Ilaria; Cattaneo, Davide; Bertoni, Rita; Ferrarin, Maurizio
2012-05-01
In this pilot study, we compared two protocols for robot-based rehabilitation of upper limb in multiple sclerosis (MS): a protocol involving reaching tasks (RT) requiring arm transport only and a protocol requiring both objects' reaching and manipulation (RMT). Twenty-two MS subjects were assigned to RT or RMT group. Both protocols consisted of eight sessions. During RT training, subjects moved the handle of a planar robotic manipulandum toward circular targets displayed on a screen. RMT protocol required patients to reach and manipulate real objects, by moving the robotic arm equipped with a handle which left the hand free for distal tasks. In both trainings, the robot generated resistive and perturbing forces. Subjects were evaluated with clinical and instrumental tests. The results confirmed that MS patients maintained the ability to adapt to the robot-generated forces and that the rate of motor learning increased across sessions. Robot-therapy significantly reduced arm tremor and improved arm kinematics and functional ability. Compared to RT, RMT protocol induced a significantly larger improvement in movements involving grasp (improvement in Grasp ARAT sub-score: RMT 77.4%, RT 29.5%, p=0.035) but not precision grip. Future studies are needed to evaluate if longer trainings and the use of robotic handles would significantly improve also fine manipulation.
-
The comparative cost analysis of EAP Re-authentication Protocol and EAP TLS Protocol
Seema Mehla; Bhawna Gupta
2010-01-01
the Extensible Authentication Protocol (EAP) is a generic framework supporting multiple types of authentication methods. In systems where EAP is used for authentication, it is desirable to not repeat the entire EAP exchange with another authenticator. The EAP reauthentication Protocol provides a consistent, methodindependentand low-latency re-authentication. It is extension to current EAP mechanism to support intradomain handoff authentication. This paper analyzed the performance of the EAP r...
-
Energy Technology Data Exchange (ETDEWEB)
Schreuder, Y.; Sherry, C. [University of Delaware, Newark, DE (United States). Center for Energy and Environmental Policy
2001-07-01
The contradictions and unresolved tensions between economic globalization and climate change negotiations have added urgency to the climate change debate. The paper argues that the declining role of the nation state in the global economy and the increasing reach of transnational corporations throughout the world present a serious challenge to the environmental integrity and success of international environmental treaties such as the Kyoto Protocol. In particular efficacy and equity of the flexible mechanism under the Kyoto Protocol are questioned as illustrated by the patterns of Foreign Direct Investment (FDI) of the US electric power industry in the developing world. US FDI in the electric power sectors of developing countries supports continued carbon-intensive development patterns which will make the long-term goals of the Kyoto Protocol more difficult to achieve. Consequently, FDI raises questions about justifiability of giving credit to Annex I countries through CDM projects undertaken by transnational electric power corporations. 13 refs.
-
Satellite Communications Using Commercial Protocols
Ivancic, William D.; Griner, James H.; Dimond, Robert; Frantz, Brian D.; Kachmar, Brian; Shell, Dan
2000-01-01
NASA Glenn Research Center has been working with industry, academia, and other government agencies in assessing commercial communications protocols for satellite and space-based applications. In addition, NASA Glenn has been developing and advocating new satellite-friendly modifications to existing communications protocol standards. This paper summarizes recent research into the applicability of various commercial standard protocols for use over satellite and space- based communications networks as well as expectations for future protocol development. It serves as a reference point from which the detailed work can be readily accessed. Areas that will be addressed include asynchronous-transfer-mode quality of service; completed and ongoing work of the Internet Engineering Task Force; data-link-layer protocol development for unidirectional link routing; and protocols for aeronautical applications, including mobile Internet protocol routing for wireless/mobile hosts and the aeronautical telecommunications network protocol.
-
Constant round group key agreement protocols: A comparative study
Makri, E.; Konstantinou, Elisavet
2011-01-01
The scope of this paper is to review and evaluate all constant round Group Key Agreement (GKA) protocols proposed so far in the literature. We have gathered all GKA protocols that require 1,2,3,4 and 5 rounds and examined their efficiency. In particular, we calculated each protocol’s computation and
-
Comparative Analysis of Different Protocols to Manage Large Scale Networks
Anil Rao Pimplapure; Dr Jayant Dubey; Prashant Sen
2013-01-01
In recent year the numbers, complexity and size is increased in Large Scale Network. The best example of Large Scale Network is Internet, and recently once are Data-centers in Cloud Environment. In this process, involvement of several management tasks such as traffic monitoring, security and performance optimization is big task for Network Administrator. This research reports study the different protocols i.e. conventional protocols like Simple Network Management Protocol and newly Gossip bas...
-
Fault Detection Variants of the CloudBus Protocol for IoT Distributed Embedded Systems
Directory of Open Access Journals (Sweden)
BARKALOV, A.
2017-05-01
Full Text Available Distributed embedded systems have become larger, more complex and complicated. More often, such systems operate accordingly to the IoT or Industry 4.0 concept. However, large number of end modules operating in the system leads to a significant load and consequently, to an overload of the communication interfaces. The CloudBus protocol is one of the methods which is used for data exchange and concurrent process synchronization in the distributed systems. It allows the significant savings in the amount of transmitted data between end modules, especially when compared with the other protocols used in the industry. Nevertheless, basic version of the protocol does not protect against the system failure in the event of failure of one of the nodes. This paper proposes four novel variants of the CloudBus protocol, which allow the fault detection. The comparison and performance analysis was executed for all proposed CloudBus variants. The verification and behavior analysis of the distributed systems were performed on SoC hardware research platform. Furthermore, a simple test application was proposed.
-
2014 Building America House Simulation Protocols
Energy Technology Data Exchange (ETDEWEB)
Wilson, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Engebrecht-Metzger, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Horowitz, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hendron, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)
2014-03-01
As BA has grown to include a large and diverse cross-section of the home building and retrofit industries, it has become more important to develop accurate, consistent analysis techniques to measure progress towards the program's goals. The House Simulation Protocol (HSP) document provides guidance to program partners and managers so they can compare energy savings for new construction and retrofit projects. The HSP provides the program with analysis methods that are proven to be effective and reliable in investigating the energy use of advanced energy systems and of entire houses.
-
2014 Building America House Simulation Protocols
Energy Technology Data Exchange (ETDEWEB)
Wilson, E. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Engebrecht, C. Metzger [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Horowitz, S. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hendron, R. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)
2014-03-01
As Building America has grown to include a large and diverse cross-section of the home building and retrofit industries, it has become more important to develop accurate, consistent analysis techniques to measure progress towards the program's goals. The House Simulation Protocol (HSP) document provides guidance to program partners and managers so they can compare energy savings for new construction and retrofit projects. The HSP provides the program with analysis methods that are proven to be effective and reliable in investigating the energy use of advanced energy systems and of entire houses.
-
Directory of Open Access Journals (Sweden)
Augusto Aguirre
2017-01-01
Full Text Available Objective: To compare the platelet concentration obtained after application of the protocol of plasma rich in growth factors - universal 1 (PRGF-U1 and the protocol of Anitua and Andia (PRP-A for obtaining platelet rich plasma. Material and Method: A descriptive, cross-sectional and comparative study was carried out with a simple random probabilistic sample consisting of 16 patients who attended the Periodontics service of the Unit of Second Specialization in Stomatology of the National University of Trujillo. Five blood samples were obtained from each patient, after applying a health questionnaire to rule out any disease or drug consumption, in order to obtain the baseline platelet concentration and that obtained after PRGF-U1 and PRP-A. To compare the platelet concentrations of the two protocols, Student’s t-test was used considering a significance level of p<0.05. RESULTS: The baseline platelet concentration was 371,250±68,203 platelets/μL, for PRGF-U1 it was 747,875±121,645 platelets/μL and for PRP-A it was 595,000±129,202 platelets/μL. A statistically significant difference (p<0.001 was found between both protocols. Conclusion: The PRGF-U1 protocol yielded a higher platelet concentration compared to the Anitúa and Andía protocol.
-
The Virtual Insect Brain protocol: creating and comparing standardized neuroanatomy
Jenett, Arnim; Schindelin, Johannes E; Heisenberg, Martin
2006-01-01
Background In the fly Drosophila melanogaster, new genetic, physiological, molecular and behavioral techniques for the functional analysis of the brain are rapidly accumulating. These diverse investigations on the function of the insect brain use gene expression patterns that can be visualized and provide the means for manipulating groups of neurons as a common ground. To take advantage of these patterns one needs to know their typical anatomy. Results This paper describes the Virtual Insect Brain (VIB) protocol, a script suite for the quantitative assessment, comparison, and presentation of neuroanatomical data. It is based on the 3D-reconstruction and visualization software Amira, version 3.x (Mercury Inc.) [1]. Besides its backbone, a standardization procedure which aligns individual 3D images (series of virtual sections obtained by confocal microscopy) to a common coordinate system and computes average intensities for each voxel (volume pixel) the VIB protocol provides an elaborate data management system for data administration. The VIB protocol facilitates direct comparison of gene expression patterns and describes their interindividual variability. It provides volumetry of brain regions and helps to characterize the phenotypes of brain structure mutants. Using the VIB protocol does not require any programming skills since all operations are carried out at an intuitively usable graphical user interface. Although the VIB protocol has been developed for the standardization of Drosophila neuroanatomy, the program structure can be used for the standardization of other 3D structures as well. Conclusion Standardizing brains and gene expression patterns is a new approach to biological shape and its variability. The VIB protocol provides a first set of tools supporting this endeavor in Drosophila. The script suite is freely available at [2] PMID:17196102
-
Directory of Open Access Journals (Sweden)
Edenis César Oliveira
2016-05-01
Full Text Available Brazilian agriculture has undergone an unprecedented environmental crisis. In this scenario, it is the agribusiness and sugarcane suppliers, working in the sugarcane industry, which have had a strong growth, with significant economic, social and environmental impacts. Studies have shown that the inclusion of environmental concerns in corporate management can bring competitiveness gains for organizations, as well as improve their image before their stakeholders. The social demand for a cleaner environment, coupled with increasing environmental regulation, have forced companies in this sector to perform and participate in extensive programmes for prevention and mitigation of environmental impacts. In this design, the Agro-environmental Protocol for the Paulista sugarcane industry has arisen, consisting of a cooperation agreement signed in June 2007 between the government of the State of São Paulo, represented by the Secretaries of State for the Environment; Agriculture and Supply; Industry Union of cane sugar; and the Sugar Cane Growers Organization's South-Central Region. The research presented here aimed to investigate the perception of managers of agribusinesses and suppliers located in the middle region of Assis-SP on the influence of the Agro-environmental Protocol in corporate environmental management process. Nineteen semi-structured interviews with the environmental managers of each signatory organization were applied. The results showed strong influence of the Agro-environmental Protocol in environmental management processes of organizations, especially with the implementation and enforcement actions to meet the directive techniques of the Agro-environmental Protocol, which has contributed to organizations internalize environmental issues and moving towards a more proactive stance.
-
The Virtual Insect Brain protocol: creating and comparing standardized neuroanatomy
Directory of Open Access Journals (Sweden)
Schindelin Johannes E
2006-12-01
Full Text Available Abstract Background In the fly Drosophila melanogaster, new genetic, physiological, molecular and behavioral techniques for the functional analysis of the brain are rapidly accumulating. These diverse investigations on the function of the insect brain use gene expression patterns that can be visualized and provide the means for manipulating groups of neurons as a common ground. To take advantage of these patterns one needs to know their typical anatomy. Results This paper describes the Virtual Insect Brain (VIB protocol, a script suite for the quantitative assessment, comparison, and presentation of neuroanatomical data. It is based on the 3D-reconstruction and visualization software Amira, version 3.x (Mercury Inc. 1. Besides its backbone, a standardization procedure which aligns individual 3D images (series of virtual sections obtained by confocal microscopy to a common coordinate system and computes average intensities for each voxel (volume pixel the VIB protocol provides an elaborate data management system for data administration. The VIB protocol facilitates direct comparison of gene expression patterns and describes their interindividual variability. It provides volumetry of brain regions and helps to characterize the phenotypes of brain structure mutants. Using the VIB protocol does not require any programming skills since all operations are carried out at an intuitively usable graphical user interface. Although the VIB protocol has been developed for the standardization of Drosophila neuroanatomy, the program structure can be used for the standardization of other 3D structures as well. Conclusion Standardizing brains and gene expression patterns is a new approach to biological shape and its variability. The VIB protocol provides a first set of tools supporting this endeavor in Drosophila. The script suite is freely available at http://www.neurofly.de2
-
Asher, Elad; Reuveni, Haim; Shlomo, Nir; Gerber, Yariv; Beigel, Roy; Narodetski, Michael; Eldar, Michael; Or, Jacob; Hod, Hanoch; Shamiss, Arie; Matetzky, Shlomi
2015-01-01
The aim of this study was to compare in patients presenting with acute chest pain the clinical outcomes and cost-effectiveness of an accelerated diagnostic protocol utilizing contemporary technology in a chest pain unit versus routine care in an internal medicine department. Hospital and 90-day course were prospectively studied in 585 consecutive low-moderate risk acute chest pain patients, of whom 304 were investigated in a designated chest pain center using a pre-specified accelerated diagnostic protocol, while 281 underwent routine care in an internal medicine ward. Hospitalization was longer in the routine care compared with the accelerated diagnostic protocol group (pdiagnostic protocol patients (98%) vs. 57 (20%) routine care patients underwent non-invasive testing, (pdiagnostic imaging testing was performed in 125 (44%) and 26 (9%) patients in the routine care and accelerated diagnostic protocol patients, respectively (pdiagnostic protocol patients compared with those receiving routine care was associated with a lower incidence of readmissions for chest pain [8 (3%) vs. 24 (9%), pdiagnostic protocol remained a predictor of lower acute coronary syndromes and readmissions after propensity score analysis [OR = 0.28 (CI 95% 0.14-0.59)]. Cost per patient was similar in both groups [($2510 vs. $2703 for the accelerated diagnostic protocol and routine care group, respectively, (p = 0.9)]. An accelerated diagnostic protocol is clinically superior and as cost effective as routine in acute chest pain patients, and may save time and resources.
-
Emergy-based comparative analysis of energy intensity in different industrial systems.
Liu, Zhe; Geng, Yong; Wang, Hui; Sun, Lu; Ma, Zhixiao; Tian, Xu; Yu, Xiaoman
2015-12-01
With the rapid economic development, energy consumption of China has been the second place in the world next to the USA. Usually, measuring energy consumption intensity or efficiency applies heat unit which is joule per gross domestic production (GDP) or coal equivalent per GDP. However, this measuring approach is only oriented by the conversion coefficient of heat combustion which does not match the real value of the materials during their formation in the ecological system. This study applied emergy analysis to evaluate the energy consumption intensity to fill this gap. Emergy analysis is considered as a bridge between ecological system and economic system, which can evaluate the contribution of ecological products and services as well as the load placed on environmental systems. In this study, emergy indicator for performing energy consumption intensity of primary energy was proposed. Industrial production is assumed as the main contributor of energy consumption compared to primary and tertiary industries. Therefore, this study validated this method by investigating the two industrial case studies which were Dalian Economic Development Area (DEDA) and Fuzhou economic and technological area (FETA), to comparatively study on their energy consumption intensity between the different kinds of industrial systems and investigate the reasons behind the differences. The results show that primary energy consumption (PEC) of DEDA was much higher than that of FETA during 2006 to 2010 and its primary energy consumption ratio (PECR) to total emergy involvement had a dramatically decline from year 2006 to 2010. In the same time, nonrenewable energy of PEC in DEDA was also much higher than that in FETA. The reason was that industrial structure of DEDA was mainly formed by heavy industries like petro-chemistry industry, manufacturing industries, and high energy-intensive industries. However, FETA was formed by electronic business, food industry, and light industries. Although
-
Technical Analysis of SSP-21 Protocol
Energy Technology Data Exchange (ETDEWEB)
Bromberger, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
2017-06-09
As part of the California Energy Systems for the Twenty-First Century (CES-21) program, in December 2016 San Diego Gas and Electric (SDG&E) contracted with Lawrence Livermore National Laboratory (LLNL) to perform an independent verification and validation (IV&V) of a white paper describing their Secure SCADA Protocol for the Twenty-First Century (SSP-21) in order to analyze the effectiveness and propriety of cryptographic protocol use within the SSP-21 specification. SSP-21 is designed to use cryptographic protocols to provide (optional) encryption, authentication, and nonrepudiation, among other capabilities. The cryptographic protocols to be used reflect current industry standards; future versions of SSP-21 will use other advanced technologies to provide a subset of security services.
-
Directory of Open Access Journals (Sweden)
Canan Saricam
2012-12-01
Full Text Available Purpose: The purpose of this study is to show the usage of DEA in efficiency measurement.Design/methodology/approach: The efficiencies of textile and apparel companies were analyzed by input-oriented DEA model under variable return to scale assumption. The textile and apparel companies quoted in Istanbul Stock Exchange for the period 2003 and 2008 were evaluated in terms of efficiency level providing a framework for the calculation of input excesses and output shortages.Findings: The analysis revealed that the average efficiency scores of the apparel industry was higher than the textile industry and two industries together. The companies in the apparel industry should overcome the lack of insufficient level of exports whereas the textile industry needs to increase gross value added in order to be more efficient.Research limitations/implications: Because of missing data, four companies from textile industry and one company from apparel industry were ignored although they took place in the records of Istanbul Stock Exchange.Practical implications: This study provided a framework for DEA application in determination and comparison of efficiency performance in an industry level.Originality/value: Selecting the groups compared as textile industry, apparel industry and the two industries in general allowed discussing the comparative efficiencies of two industries eliminating the industry specific pitfalls.
-
Performance specifications and six sigma theory: Clinical chemistry and industry compared.
Oosterhuis, W P; Severens, M J M J
2018-04-11
Analytical performance specifications are crucial in test development and quality control. Although consensus has been reached on the use of biological variation to derive these specifications, no consensus has been reached which model should be preferred. The Six Sigma concept is widely applied in industry for quality specifications of products and can well be compared with Six Sigma models in clinical chemistry. However, the models for measurement specifications differ considerably between both fields: where the sigma metric is used in clinical chemistry, in industry the Number of Distinct Categories is used instead. In this study the models in both fields are compared and discussed. Copyright © 2018. Published by Elsevier Inc.
-
Secure Certificateless Authentication and Road Message Dissemination Protocol in VANETs
Directory of Open Access Journals (Sweden)
Haowen Tan
2018-01-01
Full Text Available As a crucial component of Internet-of-Thing (IoT, vehicular ad hoc networks (VANETs have attracted increasing attentions from both academia and industry fields in recent years. With the extensive VANETs deployment in transportation systems of more and more countries, drivers’ driving experience can be drastically improved. In this case, the real-time road information needs to be disseminated to the correlated vehicles. However, due to inherent wireless communicating characteristics of VANETs, authentication and group key management strategies are indispensable for security assurance. Furthermore, effective road message dissemination mechanism is of significance. In this paper, we address the above problems by developing a certificateless authentication and road message dissemination protocol. In our design, certificateless signature and the relevant feedback mechanism are adopted for authentication and group key distribution. Subsequently, message evaluating and ranking strategy is introduced. Security analysis shows that our protocol achieves desirable security properties. Additionally, performance analysis demonstrates that the proposed protocol is efficient compared with the state of the art.
-
Improving active Mealy machine learning for protocol conformance testing
Aarts, F.; Kuppens, H.; Tretmans, J.; Vaandrager, F.; Verwer, S.
2014-01-01
Using a well-known industrial case study from the verification literature, the bounded retransmission protocol, we show how active learning can be used to establish the correctness of protocol implementation I relative to a given reference implementation R. Using active learning, we learn a model M
-
Comparative local advantages and technological competitiveness for Italian industry
International Nuclear Information System (INIS)
Palma, Daniela; Zini, Alessandro
2005-01-01
This article describes the evolution of the Italian manufacturing sector's competitiveness over the past ten years and the role played bu the local technology-based comparative advantages in shaping national competitiveness. Data obtained with local-based econometric techniques point to a gradual weakening of core know-how in high-tech industries strongly rooted in the Northwest [it
-
A comparative study of golf industry between Yangtze River Delta, China and Central Japan
Yang, Yangfan; Jin, Pingbin; Gong, Huiwen
2018-03-01
As a competition event of the 2016 Olympic Game, golf sport has aroused great attention around the world. And the Yangtze River Delta(YRD) in China, has already got certain basis and qualifications of developing golf industry, but somehow far from meeting the great potential demand of the market. This research selects the Yangtze River Delta (YRD) and Central Japan (CJ), which are indifferent golf developing stages, as the objectives. Comparative studies are being carried out with an aim of revealing the discrepancies of golf industry in selected regions. The correlations between golf industry and regional economic developing level have been explored as well. Mainly based on a geographical perspective, this research presents an initial effort to combine approaches of setting comparative indexes and spatial analysis, so that golf industry of selected regions will be compared in all directions. The results reveal that great gaps exist in YRD and CJ in terms of golf construction, service, and golf consumption. Problems in developing golf industry in YRD are identified based on the empirical results. A long-term golf development in YRD that deviating from the realistic demand is attributed to both government policies and the operational principles that the market subjects hold. Based on a comparative empirical study, suggestions relating to the government as well as the market players are put forward, with an aim of guiding the golf industry to develop in a sustainable way.
-
A comparative study of fluorescent and LED lighting in industrial facilities
Perdahci PhD, C.; Akin BSc, H. C.; Cekic Msc, O.
2018-05-01
Industrial facilities have always been in search for reducing outgoings and minimizing energy consumption. Rapid developments in lighting technology require more energy efficient solutions not only for industries but also for many sectors and for households. Addition of solid-state technology has brought LED lamps into play and with LED lamp usage, efficacy level has reached its current values. Lighting systems which uses fluorescent and LED lamps have become the prior choice for many industrial facilities. This paper presents a comparative study about fluorescent and LED based indoor lighting systems for a warehouse building in an industrial facility in terms of lighting distribution values, colour rendering, power consumption, energy efficiency and visual comfort. Both scenarios have been modelled and simulated by using Relux and photometric data for the luminaires have been gathered by conducting tests and measurements in an accredited laboratory.
-
A Comparison Between Inter-Asterisk eXchange Protocol and Jingle Protocol: Session Time
Directory of Open Access Journals (Sweden)
H. S. Haj Aliwi
2016-08-01
Full Text Available Over the last few years, many multimedia conferencing and Voice over Internet Protocol (VoIP applications have been developed due to the use of signaling protocols in providing video, audio and text chatting services between at least two participants. This paper compares between two widely common signaling protocols: InterAsterisk eXchange Protocol (IAX and the extension of the eXtensible Messaging and Presence Protocol (Jingle in terms of delay time during call setup, call teardown, and media sessions.
-
International Nuclear Information System (INIS)
Lee, J.W.; Cha, D.K.; Oh, Y.K.; Ko, K.B.; Jin, S.H.
2010-01-01
This study presents a screening protocol to evaluate the applicability of the ZVI pretreatment to various industrial wastewaters of which major constituents are not identified. The screening protocol consisted of a sequential analysis of UV-vis spectrophotometry, high-performance liquid chromatograph (HPLC), and bioassay. The UV-vis and HPLC analyses represented the potential reductive transformation of unknown constituents in wastewater by the ZVI. The UV-vis and HPLC results were quantified using principal component analysis (PCA) and Euclidian distance (ED). The short-term bioassay was used to assess the increased biodegradability of wastewater constituents after ZVI treatment. The screening protocol was applied to seven different types of real industrial wastewaters. After identifying one wastewater as the best candidate for the ZVI treatment, the benefit of ZVI pretreatment was verified through continuous operation of an integrated iron-sequencing batch reactor (SBR) resulting in the increased organic removal efficiency compared to the control. The iron pretreatment was suggested as an economical option to modify some costly physico-chemical processes in the existing wastewater treatment facility. The screening protocol could be used as a robust strategy to estimate the applicability of ZVI pretreatment to a certain wastewater with unknown composition.
-
Directory of Open Access Journals (Sweden)
Menglin Xing
2018-04-01
Full Text Available China’s resource-based cities have currently entered a period of comprehensive transformation. The differences in the economic and technical environment and significant policy orientation make it unique to some extent. This study applied value chain theory to analyze the industrial value chain of China’s resource-based cities, and three important types of optimization paths that have been applied differently by different cities were proposed. Grey relational analysis was used to compare the comprehensive value creation capacity of the three paths and its relationship with the comparative advantage of local industry. We found that a circular economy system has significant capacity to optimize economic and social value and favorable prospects for environmental value. However, this may have obvious instability in early periods of transition. This disadvantage can be remedied by cultivating related industries that have significantly comprehensive advantages in the early period. In the long term, the other two paths need to be combined with cultivating emerging industries. Finally, we found that the value creation capacity of China’s resource-based cities has roots in optimization of the industrial value chain rather than enhancement of the industrial comparative advantage. The reason for this is that value creation capacity has not yet been transformed into a source of industrial comparative advantage.
-
Addendum to the Building America House Simulation Protocols
Energy Technology Data Exchange (ETDEWEB)
Engebrecht-Metzger, C.; Wilson, E.; Horowitz, S.
2012-12-01
As Building America (BA) has grown to include a large and diverse cross-section of the home building and retrofit industries, it has become more important to develop accurate, consistent analysis techniques to measure progress towards the program's goals. The House Simulation Protocols (HSP) provides guidance to program partners and managers so that energy savings for new construction and retrofit projects can be compared alongside each other. The HSP provides the program with analysis methods that are proven to be effective and reliable in investigating the energy use of advanced energy systems and of entire houses.
-
Addendum to the Building America House Simulation Protocols
Energy Technology Data Exchange (ETDEWEB)
Engebrecht, C. Metzger [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wilson, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Horowitz, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)
2012-12-01
As DOE's Building America program has grown to include a large and diverse cross-section of the home building and retrofit industries, it has become more important to develop accurate, consistent analysis techniques to measure progress towards the program’s goals. The House Simulation Protocols (HSP) provide guidance to program partners and managers so that energy savings for new construction and retrofit projects can be compared alongside each other. The HSP provides the program with analysis methods that are proven to be effective and reliable in investigating the energy use of advanced energy systems and of entire houses.
-
International Nuclear Information System (INIS)
1999-09-01
A study was conducted to estimate the impacts on the Canadian oil and gas industry from the changes in demand for oil and natural gas fuels caused by implementation of the Kyoto Protocol throughout the Canadian economy. The multi-sector, multi-region trade (MS-MRT) model was used in the study. The MS-MRT was designed to study the effects of carbon restrictions on industrial output, trade and economic welfare in different regions of the world. An overview of the model was presented. The regions in the MS-MRT model are divided as follows: Canada; United States; European Union; Other OECD; Eastern Europe and Former Soviet Union; Non-OECD Asia; Mexico and OPEC; and all other countries. This paper also described how production, consumption and trade are modelled. The cases under which the impacts on the Canadian oil and gas sectors are modelled were also presented. refs., tabs., figs
-
Edelenbosch, O. Y.|info:eu-repo/dai/nl/412493373; Kermeli, K.|info:eu-repo/dai/nl/411260553; Crijns-Graus, W.|info:eu-repo/dai/nl/308005015; Worrell, E.|info:eu-repo/dai/nl/106856715; Bibas, R.; Fais, B.; Fujimori, S.; Kyle, P.; Sano, F.; van Vuuren, Detlef|info:eu-repo/dai/nl/11522016X
2017-01-01
The industry sector is a major energy consumer and GHG emitter. Effective climate change mitigation strategies will require a significant reduction of industrial emissions. To better understand the variations in the projected industrial pathways for both baseline and mitigation scenarios, we compare
-
International Nuclear Information System (INIS)
Persson, Tobias A.
2002-01-01
A transformation of the energy system in the 21st century is required if the CO 2 concentration in the atmosphere should be stabilized at a level that would prevent dangerous anthropogenic interference with the climate system. The industrialized countries have emitted most of the anthropogenic CO 2 released to the atmosphere since the beginning of the industrial era and still account for roughly two thirds of global fossil fuel related CO 2 emissions. Industrial country CO 2 emissions on a per capita basis are roughly five to ten times higher than those of developing countries. However, a global atmospheric CO 2 concentration target of 450 ppm, if adopted would require that global average per capita CO 2 emissions by the end of this century have to be comparable to those of developing countries today. The industrialized countries would have to reduce their emissions substantially and the emissions in developing countries could not follow a business-as-usual scenario. The transformation of the energy system and abatement of CO 2 emissions would need to occur in industrialized and developing countries. Energy-economy models have been developed to analyze of international trading in CO 2 emission permits. The thesis consists of three papers. The cost of meeting the Kyoto Protocol is estimated in the first paper. The Kyoto Protocol, which defines quantitative greenhouse gas emission commitments for industrialized countries over the period 2008-2012, is the first international agreement setting quantitative goals for abatement of CO 2 emissions from energy systems. The Protocol allows the creation of systems for trade in emission permits whereby countries exceeding their target levels can remain in compliance by purchasing surplus permits from other developed countries. However, a huge carbon surplus, which has been christened hot air, has been created in Russia and Ukraine since 1990 primarily because of the contraction of their economies. The current Unites States
-
What does the alcohol industry mean by 'Responsible drinking'? A comparative analysis.
Maani Hessari, N; Petticrew, M
2018-03-01
The alcohol industry uses responsible drinking messaging as a central element of its corporate social responsibility (CSR) activities. It has been argued that such messaging is vague, and potentially part of broader CSR activities to protect industry interests at the expense of public health. This study aimed to identify how industry defines responsible drinking, and in what contexts it is used. This was a qualitative documentary analysis of publicly available documents and web pages, including company web pages, press releases, reports and blogs from a representative selection of alcohol producers, and industry social aspect/public relations organizations; these were compared to health NGOs and Public Health England. All materials were coded iteratively using NVivo, and results were analysed using the hermeneutic approach. The term 'responsible drinking' was used almost exclusively by industry or industry-funded organizations. 'Responsible drinking' was not clearly defined with relation to any particular level of alcohol consumption, and government alcohol guidelines were rarely referenced. Responsible drinking is a strategically ambiguous, industry-affiliated term that allows for multiple interpretations. Industry sources rarely reference government drinking guidelines in the context of responsible drinking, stressing individual responsibility and risk management. Public health practitioners should be aware of these distinctions, and use clear language regarding lower risk drinking.
-
Language pathway tracking: comparing nTMS-based DTI fiber tracking with a cubic ROIs-based protocol.
Negwer, Chiara; Sollmann, Nico; Ille, Sebastian; Hauck, Theresa; Maurer, Stefanie; Kirschke, Jan S; Ringel, Florian; Meyer, Bernhard; Krieg, Sandro M
2017-03-01
OBJECTIVE Diffusion tensor imaging (DTI) fiber tracking (FT) has been widely used in glioma surgery in recent years. It can provide helpful information about subcortical structures, especially in patients with eloquent space-occupying lesions. This study compared the newly developed navigated transcranial magnetic stimulation (nTMS)-based DTI FT of language pathways with the most reproducible protocol for language pathway tractography, using cubic regions of interest (ROIs) for the arcuate fascicle. METHODS Thirty-seven patients with left-sided perisylvian lesions underwent language mapping by repetitive nTMS. DTI FT was performed using the cubic ROIs-based protocol and the authors' nTMS-based DTI FT approach. The same minimal fiber length and fractional anisotropy were chosen (50 mm and 0.2, respectively). Both protocols were performed with standard clinical tractography software. RESULTS Both methods visualized language-related fiber tracts (i.e., corticonuclear tract, arcuate fascicle, uncinate fascicle, superior longitudinal fascicle, inferior longitudinal fascicle, arcuate fibers, commissural fibers, corticothalamic fibers, and frontooccipital fascicle) in all 37 patients. Using the cubic ROIs-based protocol, 39.9% of these language-related fiber tracts were detected in the examined patients, as opposed to 76.0% when performing nTMS-based DTI FT. For specifically tracking the arcuate fascicle, however, the cubic ROIs-based approach showed better results (97.3% vs 75.7% with nTMS-based DTI FT). CONCLUSIONS The cubic ROIs-based protocol was designed for arcuate fascicle tractography, and this study shows that it is still useful for this intention. However, superior results were obtained using the nTMS-based DTI FT for visualization of other language-related fiber tracts.
-
The Kyoto Protocol and the coal industry in Colombia
International Nuclear Information System (INIS)
Viana Rubio, Edgar
1998-02-01
In this article is studied the possible incidence of the commitments reached in the Kyoto Protocol on the coal market, making emphasis in the Colombian case. Projections, made in a study of Hill y Associates, points out that in a scenario of greenhouse gases emissions reduction, the market of the thermal coal will be seriously affected by the incidence on their demand
-
Comparative Testing for Corporate Impact Assessment Tools
DEFF Research Database (Denmark)
Farsang, Andrea; Reisch, Lucia A.
of our study are: poverty, water and sanitation, education, food and agriculture, climate change, and human rights in three industries, namely: footwear, coffee, and paper and pulp. The paper develops a protocol for the selection and quantification of indicators that can be used in selecting...... the appropriate tools for measuring impacts in the selected sectors on SDGs. Background: In the Global Value Project, a long list of indicators was compiled covering the main thematic areas and challenges of sustainability. In a second step, this long list was reduced using predefined criteria as well as other...... criteria, such as the feasibility and scalability of different tools. As a result, a protocol was developed to help compare the different tools that measure corporate impact and to interpret the results in relation to the SDGs. The protocol was pre-tested with a limited number of tools in two case studies...
-
International Nuclear Information System (INIS)
Sampa, Maria Helena de O.; Rela, Paulo R.; Duarte, Celina Lopes; Las Casas, Alexandre; Mori, Manoel Nunes; Omi, Nelson M.
2005-01-01
A technical and economical feasibility study was performed comparing the use electron beam and activated charcoal for treatment of industrial wastewater. In this study was used synthetic solutions, prepared in laboratory with organic compounds standards, where the composition was focused on the critical organic contaminants usually presented in wastewater from petrochemical industry. For the sample irradiation was used an industrial electron beam from Radiation Dynamics Inc. 1.5 MeV - 37.5 kW setup in IPEN. The doses ranged from 5 kGy to 100 kGy. A common granulated activated charcoal in a fixed-bed absorber glass column was used to study the pollutants absorption performance. The results show that if the adequate irradiation dose was delivered to the organic pollutant, it is possible to conclude for the studied compounds that the Electron Beam Process is, in aspect of organic removal efficiency, similar to the activated carbon process. (author)
-
Steele, Catriona M; Bayley, Mark T; Peladeau-Pigeon, Melanie; Nagy, Ahmed; Namasivayam, Ashwini M; Stokely, Shauna L; Wolkin, Talia
2016-06-01
The objective of this study was to compare the outcomes of two tongue resistance training protocols. One protocol ("tongue-pressure profile training") emphasized the pressure-timing patterns that are typically seen in healthy swallows by focusing on gradual pressure release and saliva swallowing tasks. The second protocol ("tongue-pressure strength and accuracy training") emphasized strength and accuracy in tongue-palate pressure generation and did not include swallowing tasks. A prospective, randomized, parallel allocation trial was conducted. Of 26 participants who were screened for eligibility, 14 received up to 24 sessions of treatment. Outcome measures of posterior tongue strength, oral bolus control, penetration-aspiration and vallecular residue were made based on videofluoroscopy analysis by blinded raters. Complete data were available for 11 participants. Significant improvements were seen in tongue strength and post-swallow vallecular residue with thin liquids, regardless of treatment condition. Stage transition duration (a measure of the duration of the bolus presence in the pharynx prior to swallow initiation, which had been chosen to capture impairments in oral bolus control) showed no significant differences. Similarly, significant improvements were not seen in median scores on the penetration-aspiration scale. This trial suggests that tongue strength can be improved with resistance training for individuals with tongue weakness following stroke. We conclude that improved penetration-aspiration does not necessarily accompany improvements in tongue strength; however, tongue-pressure resistance training does appear to be effective for reducing thin liquid vallecular residue.
-
The need for LWR metrology standardization: the imec roughness protocol
Lorusso, Gian Francesco; Sutani, Takumichi; Rutigliani, Vito; van Roey, Frieda; Moussa, Alain; Charley, Anne-Laure; Mack, Chris; Naulleau, Patrick; Constantoudis, Vassilios; Ikota, Masami; Ishimoto, Toru; Koshihara, Shunsuke
2018-03-01
As semiconductor technology keeps moving forward, undeterred by the many challenges ahead, one specific deliverable is capturing the attention of many experts in the field: Line Width Roughness (LWR) specifications are expected to be less than 2nm in the near term, and to drop below 1nm in just a few years. This is a daunting challenge and engineers throughout the industry are trying to meet these targets using every means at their disposal. However, although current efforts are surely admirable, we believe they are not enough. The fact is that a specification has a meaning only if there is an agreed methodology to verify if the criterion is met or not. Such a standardization is critical in any field of science and technology and the question that we need to ask ourselves today is whether we have a standardized LWR metrology or not. In other words, if a single reference sample were provided, would everyone measuring it get reasonably comparable results? We came to realize that this is not the case and that the observed spread in the results throughout the industry is quite large. In our opinion, this makes the comparison of LWR data among institutions, or to a specification, very difficult. In this paper, we report the spread of measured LWR data across the semiconductor industry. We investigate the impact of image acquisition, measurement algorithm, and frequency analysis parameters on LWR metrology. We review critically some of the International Technology Roadmap for Semiconductors (ITRS) metrology guidelines (such as measurement box length larger than 2μm and the need to correct for SEM noise). We compare the SEM roughness results to AFM measurements. Finally, we propose a standardized LWR measurement protocol - the imec Roughness Protocol (iRP) - intended to ensure that every time LWR measurements are compared (from various sources or to specifications), the comparison is sensible and sound. We deeply believe that the industry is at a point where it is
-
Riber-Hansen, Rikke; Hastrup, Nina; Clemmensen, Ole; Behrendt, Nille; Klausen, Siri; Ramsing, Mette; Spaun, Eva; Hamilton-Dutoit, Stephen Jacques; Steiniche, Torben
2012-02-01
Metastasis size in melanoma sentinel lymph nodes (SLNs) is an emerging prognostic factor. Two European melanoma treatment trials include SLN metastasis diameters as inclusion criteria. Whilst diameter estimates are sensitive to the number of sections examined, the level of this bias is largely unknown. We performed a prospective multicentre study to compare the European Organisation for Research and Treatment of Cancer (EORTC) recommended protocol with a protocol of complete step-sectioning. One hundred and thirty-three consecutive SLNs from seven SLN centres were analysed by five central sections 50μm apart (EORTC Protocol) followed by complete 250μm step-sectioning. Overall, 29 patients (21.8%) were SLN-positive. The EORTC Protocol missed eight of these metastases (28%), one metastasis measuring less than 0.1mm in diameter, seven measuring between 0.1 and 1mm. Complete step-sectioning at 250μm intervals (Extensive Protocol) missed one metastasis (3%) that measured less than 0.1mm. Thirteen treatment courses (34%) performed if inclusion was based on the Combined Protocol would not be performed if assessed by the EORTC Protocol. Thus, 10 patients would be without completion lymph node dissection (EORTC MINITUB study), whilst three patients would not be eligible for anti-CTLA4 trial (EORTC protocol 18071). The corresponding number with the Extensive Protocol would be three; one patient for the MINITUB registration study and two patients for the anti-CTLA4 study. Examining SLNs by close central sectioning alone (EORTC Protocol) misses a substantial number of metastases and underestimates the maximum metastasis diameter, leading to important changes in patient eligibility for various treatment protocols. Copyright © 2011 Elsevier Ltd. All rights reserved.
-
International Nuclear Information System (INIS)
Lau, Lee Chung; Tan, Kok Tat; Lee, Keat Teong; Mohamed, Abdul Rahman
2009-01-01
Global warming and the associated changes in the world climate pattern have been accepted world wide as the gravest threat to humanity in the 20th century. To mitigate the impacts of global warming, the Kyoto Protocol was established in 1997 with the objective of reducing global greenhouse gases (GHGs) emission, in particular carbon dioxide (CO 2 ), by 5.2% below 1990 levels. Developed nations that ratified the Protocol are committed to GHG reduction targets while developing nations are encouraged to reduce GHG emissions on a voluntary basis. Since most of the GHGs emissions come from the energy sector, energy policy plays an important role in fulfilling the Kyoto Protocol obligations. This year marks the beginning of the commitment period for the 2012 Kyoto Protocol. In this case, it would be worthwhile to compare the energy policies in Malaysia and Japan as these nations move towards fulfilling their obligations towards the Kyoto Protocol; bearing in mind that both countries ratified the Protocol, but that Japan commits a reduction target of 6% while Malaysia bears no obligation. Based on the comparison, recommendations were made on how a developing nation like Malaysia could adopt the policies implemented in Japan to suit local conditions and contribute significantly to GHG reduction.
-
Have Countries with Lax Environmental Regulations a Comparative Advantage in Polluting Industries?
Quiroga, Miguel; Sterner, Thomas; Persson, Martin
2007-01-01
We aim to study whether lax environmental regulations induce comparative advantages, causing the least-regulated countries to specialize in polluting industries. The study is based on Trefler and Zhu’s (2005) definition of the factor content of trade. For the econometrical analysis, we use a cross-section of 71 countries in 2000 to examine the net exports in the most polluting industries. We try to overcome three weaknesses in the empirical literature: the measurement of environmental endowme...
-
A Security plan for LMOs - concentrated on environmental policy of Biosafety Protocol
Energy Technology Data Exchange (ETDEWEB)
Park, Yong Ha [Korea Environment Institute, Seoul (Korea)
1998-12-01
Biotechnology industry in Korea is raised by the national support. Also, Korea imports 70% of entire agricultural products. Considering the present situation in Korea, signing a Biosafety Protocol is necessary to prevent harm by LMOs and to protect associated biotechnological industry. Therefore, the problems on signing Biosafety Protocol were analyzed and the environmental policy to be pursued was proposed. This study result will be a cornerstone to prepare a definite environmental policy by government. 54 refs., 7 figs., 27 tabs.
-
Honggue Lee
2018-01-01
A two-part model is estimated to see if increasing returns and comparative advantage are empirically equivalent in explaining intra-industry trade. The model has separate mechanisms for determining the occurrence and the extent of intra-industry trade. Estimation is based on an augmented Grubel-Lloyd index derived from the data set on SITC 7 goods at the 3-digit SITC (Revision 4) for country pairs in which Korea is fixed as a source country. Estimation results show that both increasing return...
-
International Nuclear Information System (INIS)
Koehn, J.
1995-01-01
Standard industrial hygiene techniques for recognition, evaluation, and control can be directly applied to development of technical protocols for workplace exposure assessment activities for a variety of field site locations. Categories of occupational hazards include chemical and physical agents. Examples of these types of hazards directly related to oil and gas exploration and production workplaces include hydrocarbons, benzene, oil mist, hydrogen sulfide, Naturally Occurring Radioactive Materials (NORM), asbestos-containing materials, and noise. Specific components of well process chemicals include potential hazardous chemical substances such as methanol, acrolein, chlorine dioxide, and hydrochloric acid. Other types of exposure hazards may result from non-routine conduct of sandblasting and painting operations
-
A review of tags anti-collision and localization protocols in RFID networks.
Ullah, S; Alsalih, W; Alsehaim, A; Alsadhan, N
2012-12-01
Radio Frequency IDentification (RFID) has allowed the realization of ubiquitous tracking and monitoring of physical objects wirelessly with minimum human interactions. It plays a key role in a wide range of applications including asset tracking, contactless payment, access control, transportation and logistics, and other industrial applications. On the other side, RFID systems face several technical challenges that need to be overcome in order to achieve their potential benefits; tags collisions and localization of tagged objects are two important challenges. Numerous anti-collision and localization protocols have been proposed to address these challenges. This paper reviews the state-of-art tags' anti-collision and localization protocols, and provides a deep insight into technical issues of these protocols. The probabilistic and deterministic anti-collision protocols are critically studied and compared in terms of different parameters. We further review distance estimation, scene analysis, and proximity localization schemes and provide useful suggestions. We also introduce a new hybrid direction that utilizes power control to spatially partition the interrogation range of a reader for more efficient anti-collision and localization. Finally, we present the applications of RFID systems in healthcare sectors.
-
Analysing Protocol Stacks for Services
DEFF Research Database (Denmark)
Gao, Han; Nielson, Flemming; Nielson, Hanne Riis
2011-01-01
We show an approach, CaPiTo, to model service-oriented applications using process algebras such that, on the one hand, we can achieve a certain level of abstraction without being overwhelmed by the underlying implementation details and, on the other hand, we respect the concrete industrial...... standards used for implementing the service-oriented applications. By doing so, we will be able to not only reason about applications at different levels of abstractions, but also to build a bridge between the views of researchers on formal methods and developers in industry. We apply our approach...... to the financial case study taken from Chapter 0-3. Finally, we develop a static analysis to analyse the security properties as they emerge at the level of concrete industrial protocols....
-
Ancestors protocol for scalable key management
Directory of Open Access Journals (Sweden)
Dieter Gollmann
2010-06-01
Full Text Available Group key management is an important functional building block for secure multicast architecture. Thereby, it has been extensively studied in the literature. The main proposed protocol is Adaptive Clustering for Scalable Group Key Management (ASGK. According to ASGK protocol, the multicast group is divided into clusters, where each cluster consists of areas of members. Each cluster uses its own Traffic Encryption Key (TEK. These clusters are updated periodically depending on the dynamism of the members during the secure session. The modified protocol has been proposed based on ASGK with some modifications to balance the number of affected members and the encryption/decryption overhead with any number of the areas when a member joins or leaves the group. This modified protocol is called Ancestors protocol. According to Ancestors protocol, every area receives the dynamism of the members from its parents. The main objective of the modified protocol is to reduce the number of affected members during the leaving and joining members, then 1 affects n overhead would be reduced. A comparative study has been done between ASGK protocol and the modified protocol. According to the comparative results, it found that the modified protocol is always outperforming the ASGK protocol.
-
Comparative studies of industrial grade carbon black powders
Energy Technology Data Exchange (ETDEWEB)
Chawla, Komal, E-mail: komalchawla.rs@gmail.com; Chauhan, Alok P. S., E-mail: chauhan.alok@gmail.com, E-mail: alok.chauhan@alumni.stonybrook.edu [Department of Physics and Material Science and Engineering, Jaypee Institute of Information Technology, A-10, Sector-62, Noida-201307, UP, India. (India)
2016-05-06
Comparative studies of two dissimilar industrial grade Carbon Black (CB) powders (N375 and N405) were conducted. The structure, surface area and particle size are the three important characteristics of CB powder that determine their processability and application as filler in preparing rubber compounds. The powders were characterized for their structure using dibutyl phthalate absorption (DBPA), particle size via laser particle size analyzer and surface area by nitrogen adsorption method. The structural characterization showed that N405 had lower DBPA in comparison to N375, confirming low structure of N405 grade CB powder. It was observed from the particle size analysis that N375 was coarser than N405 grade CB. The total surface area values were determined by the BET method based on the cross sectional area of the nitrogen molecule. N375, a coarse grade CB powder with high structure, depicted less surface area as compared to N405.
-
RadNet: Open network protocol for radiation data
International Nuclear Information System (INIS)
Rees, B.; Olson, K.; Beckes-Talcott, J.; Kadner, S.; Wenderlich, T.; Hoy, M.; Doyle, W.; Koskelo, M.
1998-01-01
Safeguards instrumentation is increasingly being incorporated into remote monitoring applications. In the past, vendors of radiation monitoring instruments typically provided the tools for uploading the monitoring data to a host. However, the proprietary nature of communication protocols lends itself to increased computer support needs and increased installation expenses. As a result, a working group of suppliers and customers of radiation monitoring instruments defined an open network protocol for transferring packets on a local area network from radiation monitoring equipment to network hosts. The protocol was termed RadNet. While it is now primarily used for health physics instruments, RadNet's flexibility and strength make it ideal for remote monitoring of nuclear materials. The incorporation of standard, open protocols ensures that future work will not render present work obsolete; because RadNet utilizes standard Internet protocols, and is itself a non-proprietary standard. The use of industry standards also simplifies the development and implementation of ancillary services, e.g. E-main generation or even pager systems
-
Model Effectiviteit Instrumenten-Energiebesparing Industrie (MEI-Energie)
Wijk JJ van; Engelen RFJM; Ros JPM; LAE
2001-01-01
Within the context of the Kyoto Protocol insight into industrial energy savings and the influence of policy instruments is desirable, both for the past and the future. By virtue of its legal central policy analysis function, the RIVM is currently developing an energy-saving model for industrial
-
Directory of Open Access Journals (Sweden)
Jourdier Etienne
2012-05-01
Full Text Available Abstract Background During bioprocess development, secondary screening is a key step at the boundary between laboratory and industrial conditions. To ensure an effective high-throughput screening, miniaturized laboratory conditions must mimic industrial conditions, especially for oxygen transfer, feeding capacity and pH stabilization. Results A feeding strategy has been applied to develop a simple screening procedure, in which a stoichiometric study is combined with a standard miniaturization procedure. Actually, the knowledge of all nutriments and base or acid requirements leads to a great simplification of pH stabilization issue of miniaturized fed-batch cultures. Applied to cellulase production by Trichoderma reesei, this strategy resulted in a stoichiometric mixed feed of carbon and nitrogen sources. While keeping the pH between shake flask and stirred bioreactor comparable, the developed shake flask protocol reproduced the strain behaviour under stirred bioreactor conditions. Compared to a an already existing miniaturized shake flasks protocol, the cellulase concentration was increased 5-fold, reaching about 10 g L-1. Applied to the secondary screening of several clones, the newly developed protocol succeeded in selecting a clone with a high industrial potential. Conclusions The understanding of a bioprocess stoichiometry contributed to define a simpler and more effective miniaturization. The suggested strategy can potentially be applied to other fed-batch processes, for the screening of either strain collections or experimental conditions.
-
Miguel Angel Quiroga; Martin Persson; Thomas Sterner
2009-01-01
We study whether lax environmental regulations induce comparative advantages, causing the least-regulated countries to specialize in polluting industries. We seek to improve three areas in the empirical literature based on the Heckscher-Ohlin-Vanek’s factor content of trade, more specifically in Tobey’s (1990) approach: the measurement of environmental endowments, the possible endogeneity due to an omitted variable that has not been considered, and the influence of the industrial level of agg...
-
Attacks to Cryptography Protocols of Wireless Industrial Communication Systems
Directory of Open Access Journals (Sweden)
Tomas Ondrasina
2010-01-01
Full Text Available The paper deals with problems of safety and security principles within wireless industrial communication systems. First safety requirements to wireless industrial communication system, summarisation of attack methods and the available measures for risks elimination are described with orientation to safety critical applications. The mainly part is oriented to identification of risks and summarisation of defensive methods of wireless communication based on cryptographic techniques. Practical part the cryptoanalytic’s attacks to COTS (Commercial Off-The-Shelf wireless communications are mentioned based on the IEEE 802.11 standards.
-
Comparable efficiency of different extraction protocols for wheat and rye prolamins
Directory of Open Access Journals (Sweden)
Peter Socha
2016-01-01
Full Text Available The identification and quantification of cereal storage proteins is of interest of many researchers. Their structural or functional properties are usually affected by the way how they are extracted. The efficiency of extraction process depends on the cereal source and working conditions. Here, we described various commonly used extraction protocols differing in the extraction conditions (pre-extraction of albumins/globulins, sequential extraction of individual protein fractions or co-extraction of gluten proteins, heating or non-heating, reducing or non-reducing conditions. The total protein content of all fractions extracted from commercially available wheat and rye flours was measured by the Bradford method. Tris-Tricine SDS-PAGE was used to determine the molecular weights of wheat gliadins, rye secalins and high-molecular weight glutelins which are the main triggering factors causing celiac disease. Moreover, we were able to distinguish individual subunits (α/β-, γ-, ω-gliadins and 40k-γ-, 75k-γ-, ω-secalins of wheat/rye prolamins. Generally, modified extraction protocols against classical Osborne procedure were more effective and yields higher protein content in all protein fractions. Bradford measurement led into underestimation of results in three extraction procedures, while all protein fractions were clearly identified on SDS-PAGE gels. Co-extraction of gluten proteins resulted in appearance of both, low-molecular weight fractions (wheat gliadins and rye secalins as well as high-molecular weight glutelins which means that is not necessary to extract gluten proteins separately. The two of three extraction protocols showed high technical reproducibility with coefficient of variation less than 20%. Carefully optimized extraction protocol can be advantageous for further analyses of cereal prolamins. Normal 0 21 false false false SK X-NONE X-NONE
-
Efficient secure two-party protocols
Hazay, Carmit
2010-01-01
The authors present a comprehensive study of efficient protocols and techniques for secure two-party computation -- both general constructions that can be used to securely compute any functionality, and protocols for specific problems of interest. The book focuses on techniques for constructing efficient protocols and proving them secure. In addition, the authors study different definitional paradigms and compare the efficiency of protocols achieved under these different definitions.The book opens with a general introduction to secure computation and then presents definitions of security for a
-
Development of IT-based Data Communication Protocol for Nuclear Power Plant
International Nuclear Information System (INIS)
Jeong, K. I.; Kim, D. H.; Lee, J. C.
2009-07-01
The communication protocol, which provide overall communication rules and methods and give ways how to exchange information, is the most important part and it can affect the overall performance of communication network. Therefore, the first step of development of the communication network of an NPP is its own communication protocol design, which conforms to the requirements and characteristics of an NPP I and C. To manage the protocol development process, we establish development procedure and define detail substantive based on the procedure and we examine the adaptability of existing commercial communication protocols to the communication protocol of an NPP I and C. Existing commercial communication protocols based on Information Technology(IT) can be categorized into 3 groups: general commercial communication protocols, industrial communication protocols, military communication protocols. We analyze the design criteria and performance requirements of popular protocols in each group. And also, we examine the adaptability to the communication protocol of an NPP. Based on these results, we developed our own protocol for NPP I and C, which meet the required specifications through design overall protocol architecture and data frame format, definition of functional requirements and specifications
-
A comparative analysis of selected wastewater pretreatment processes in food industry
Jaszczyszyn, Katarzyna; Góra, Wojciech; Dymaczewski, Zbysław; Borowiak, Robert
2018-02-01
The article presents a comparative analysis of the classical coagulation with the iron sulphate and adsorption on bentonite for the pretreatment of wastewater in the food industry. As a result of the studies, chemical oxygen demand (COD) and total nitrogen (TN) reduction were found to be comparable in both technologies, and a 29% higher total phosphorus removal efficiency by the coagulation was observed. After the coagulation and adsorption processes, a significant difference between mineral and organic fraction in the sludge was found (49% and 51% for bentonite and 28% and 72% for iron sulphate, respectively).
-
Directory of Open Access Journals (Sweden)
Danang Parikesit
2002-07-01
Full Text Available ABSTRAK Sektor transportasi, khususnya sektor angkutan umum telah lama disadari sebagai kontributor utama emisi gas rumah kaca (Green House Gases Emissions. Investasi pada angkutan umum perkotaan sangat dibutuhkan walaupun pembiayaan yang konvensional sering sulit dilakukan karena tingginya tingkat investasi dan prioritas pemerintah saat ini. Angkutan perkotaan juga dilihat sebagai daerah kekuasaan sektor swasta yang membuat pemerintah sulit untuk mengeluarkan uang publik. Ratifikasi Kyoto Protocol telah memberi jalan untuk mengembangkan alternatif pembiayaan untuk pembangunan yang berkelanjutan. Clean Development Mechanism pada Kyoto Protocol telah membuka kesempatan bagi otoritas angkutan umum perkotaan dengan menggunakan prinsip carbon trading. Sumber daya untuk menerapkan proyek angkutan umum perkotaan dengan CDM sangat esensial. Pekerjaan di masa datang harus diarahkan untuk mempelajari metodologi dalam mengkombinasi soft measures dan melaksanakan proyek secara optimal. Pembiayaan dengan sistem CDM ini telah dimulai di Yogyakarta dengan judul The Green House Gases Emission Reduction Program for Urban Buses in Yogyakarta atau Program Penurunan Emisi Gas Rumah Kaca untuk Bus Perkotaan di Yogyakarta. Sebuah aliansi dengan nama YUPTA (Yogyakarta Urban Public Transport Alliance telah dibentuk yang terdiri dari 3 lembaga yaitu Dinas Perhubungan Propinsi DIY, Pusat Studi Transportasi dan Logistik (PUSTRAL UGM dan Koperasi Pengusaha Angkutan Kota Yogyakarta (KOPATA. ABSTRACT Transportation sector, especially public transportation, has been known as the main contributor to the green house hases emission. Investment to urban public transportation is needed but conventional funding is often difficult to be obtained because of the high investment level and the present government priority. Urban transportation is also seen as a private sector domain making the government difficult to use public fund. Kyoto protocol ratification has opened the way to
-
Energy Technology Data Exchange (ETDEWEB)
NONE
2006-06-15
This document constitutes the report of the France on the demonstrable progresses according the application of the 3 article of the Kyoto protocol. The first chapter is a description of the french climatic policy, as the second presents the tendencies and the projections concerning the greenhouse effect gases emissions. The chapter 3 details the policies effects and the measures ( energy, transport, industry and wastes). The last chapter is devoted to the respect of the other engagements articles 10 and 11 of the Kyoto protocol. (A.L.B.)
-
Comparative analysis of protocols for DNA extraction from soybean caterpillars.
Palma, J; Valmorbida, I; da Costa, I F D; Guedes, J V C
2016-04-07
Genomic DNA extraction is crucial for molecular research, including diagnostic and genome characterization of different organisms. The aim of this study was to comparatively analyze protocols of DNA extraction based on cell lysis by sarcosyl, cetyltrimethylammonium bromide, and sodium dodecyl sulfate, and to determine the most efficient method applicable to soybean caterpillars. DNA was extracted from specimens of Chrysodeixis includens and Spodoptera eridania using the aforementioned three methods. DNA quantification was performed using spectrophotometry and high molecular weight DNA ladders. The purity of the extracted DNA was determined by calculating the A260/A280 ratio. Cost and time for each DNA extraction method were estimated and analyzed statistically. The amount of DNA extracted by these three methods was sufficient for PCR amplification. The sarcosyl method yielded DNA of higher purity, because it generated a clearer pellet without viscosity, and yielded high quality amplification products of the COI gene I. The sarcosyl method showed lower cost per extraction and did not differ from the other methods with respect to preparation times. Cell lysis by sarcosyl represents the best method for DNA extraction in terms of yield, quality, and cost effectiveness.
-
A case for evaluating sensor network protocols concurrently
Gnawali, Omprakash; Guibas, Leonidas; Levis, Philip
2010-01-01
Researchers typically evaluate and compare protocols on the testbeds by running them one at a time. This methodology ignores the variation in link qualities and wireless environment across these experiments. These variations can introduce significant noise in the results. Evaluating two protocols concurrently, however, suffers from inter-protocol interactions. These interactions can perturb performance even under very light load, especially timing and timing sensitive protocols. We argue that the benefits of running protocols concurrently greatly outweigh the disadvantages. Protocols rarely run in isolation in real networks, and so considering such interactions is valuable. Although the wireless environment is still uncontrolled, concurrent evaluations make comparisons fair and more statistically sound. Through experiments on two testbeds, we make the case for evaluating and comparing low data-rate sensor network protocols by running them concurrently. Copyright 2010 ACM.
-
Test Protocols for Advanced Inverter Interoperability Functions - Appendices
Energy Technology Data Exchange (ETDEWEB)
Johnson, Jay Dean [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gonzalez, Sigifredo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ralph, Mark E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ellis, Abraham [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Broderick, Robert Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2013-11-01
Distributed energy resources (DER) such as photovoltaic (PV) systems, when deployed in a large scale, are capable of influencing significantly the operation of power systems. Looking to the future, stakeholders are working on standards to make it possible to manage the potentially complex interactions between DER and the power system. In 2009, the Electric Power Research Institute (EPRI), Sandia National Laboratories (SNL) with the U.S. Department of Energy (DOE), and the Solar Electric Power Association (SEPA) initiated a large industry collaborative to identify and standardize definitions for a set of DER grid support functions. While the initial effort concentrated on grid-tied PV inverters and energy storage systems, the concepts have applicability to all DER. A partial product of this on-going effort is a reference definitions document (IEC TR 61850-90-7, Object models for power converters in distributed energy resources (DER) systems) that has become a basis for expansion of related International Electrotechnical Commission (IEC) standards, and is supported by US National Institute of Standards and Technology (NIST) Smart Grid Interoperability Panel (SGIP). Some industry-led organizations advancing communications protocols have also embraced this work. As standards continue to evolve, it is necessary to develop test protocols to independently verify that the inverters are properly executing the advanced functions. Interoperability is assured by establishing common definitions for the functions and a method to test compliance with operational requirements. This document describes test protocols developed by SNL to evaluate the electrical performance and operational capabilities of PV inverters and energy storage, as described in IEC TR 61850-90-7. While many of these functions are not now required by existing grid codes or may not be widely available commercially, the industry is rapidly moving in that direction. Interoperability issues are already apparent as
-
2011-09-29
... Safety and Effectiveness Protocol Development and Submission.'' The purpose of this document is to provide sponsors guidance in preparation of study protocols for review by the Center for Veterinary Medicine, Office of New Animal Drug Evaluation. The recommendations included in this guidance are intended...
-
Coal in Europe: what future?: prospects of the coal industry and impacts study of the Kyoto Protocol
International Nuclear Information System (INIS)
Rudianto, E.
2006-12-01
From the industrial revolution to the 1960's, coal was massively consumed in Europe and its utilization was constantly raised. In the aftermath of World War II, coal had also an important part in reconstruction of Western Europe's economy. However, since the late 1960's, its demand has been declining. There is a (mis)conception from a number of policy makers that saying coal mining and utilizations in Europe is unnecessary. Therefore in the European Union (EU) Green Paper 2000, coal is described as an 'undesirable' fuel and the production of coal on the basis of economic criteria has no prospect. Furthermore, the commitment to the Kyoto Protocol in reducing greenhouse gases emission has aggravated this view. Faced with this situation, the quest for the future of coal industry (mining and utilization) in the lines of an energy policy is unavoidable. This dissertation did a profound inquiry trying to seek answers for several questions: Does the European Union still need coal? If coal is going to play a part in the EU, where should the EU get the coal from? What should be done to diminish negative environmental impacts of coal mining and utilization? and finally in regard to the CO 2 emission concerns, what will the state of the coal industry in the future in the EU? To enhance the analysis, a system dynamic model, called the Dynamics Coal for Europe (the DCE) was developed. The DCE is an Energy-Economy-Environment model. It synthesizes the perspectives of several disciplines, including geology, technology, economy and environment. It integrates several modules including exploration, production, pricing, demand, import and emission. Finally, the model emphasizes the impact of delays and feed-back in both the physical processes and the information and decision-making processes of the system. The calibration process for the DCE shows that the model reproduces past numbers on the scale well for several variables. Based on the results of this calibration process, it can
-
International Nuclear Information System (INIS)
2003-02-01
Climate change is a major issue facing Quebec's population and future generations. The scientific community generally agrees on the negative effects resulting from global climate change on human health, the environment and the economy. In 1997, the Kyoto Protocol was adopted by industrialized countries, whereby countries agreed to reduce their emissions of greenhouse gases (GHG) by a certain percentage, calculated from 1990 levels. In the case of Canada, this percentage was 6 per cent, for the first commitment period covering 2008-2012. Quebec's performance on the issue of GHG emissions compares favorably to that of other Canadian provinces, even to that of other industrialized countries. Canada ratified the Kyoto Protocol in December 2002. The Quebec National Assembly called for a parliamentary committee to meet on 18 February 2003 on the implementation of the Kyoto Protocol. Hydro-Quebec, since 1997, has favored the ratification of the Kyoto Protocol by the Canadian government. In this document, Hydro-Quebec makes its position known in the context of this debate and the commercial context of the electric power industry in 2003. The first section of the document was devoted to the favorable performance of Hydro-Quebec, on the retroactive and prospective aspects of GHG emissions with regard to the entire electric power industry in Canada. In the second section, an explanation was provided, in the context of deregulation of the electricity market in North America, on the implementation of the Kyoto Protocol in Quebec and in Canada and how it becomes a major commercial issue for Hydro-Quebec. The analysis was conducted in light of the mandate of Hydro-Quebec to provide a secure and reliable service to its customers. refs., 1 fig
-
Ad hoc mobile wireless networks principles, protocols, and applications
Sarkar, Subir Kumar
2013-01-01
The military, the research community, emergency services, and industrial environments all rely on ad hoc mobile wireless networks because of their simple infrastructure and minimal central administration. Now in its second edition, Ad Hoc Mobile Wireless Networks: Principles, Protocols, and Applications explains the concepts, mechanism, design, and performance of these highly valued systems. Following an overview of wireless network fundamentals, the book explores MAC layer, routing, multicast, and transport layer protocols for ad hoc mobile wireless networks. Next, it examines quality of serv
-
Application of Protocol-Oriented MVVM Architecture in iOS Development
Luong Nguyen, Khoi Nguyen
2017-01-01
The mobile application industry is fast paced. Requirements change, additions of new features occur on a daily basis and demand frequent code structure adjustment. Thus, a flexible and maintainable software architecture is often a key factor for an application’s success. The major objective of this thesis is to propose a practical use case of Protocol Oriented Model View View Model, an architecture inspired by the Protocol Oriented Programming paradigm. This thesis explains the architectur...
-
Directory of Open Access Journals (Sweden)
Andrea Giovannelli
2017-10-01
Full Text Available The majority of currently published dispersion protocols of carbon nanotubes rely on techniques that are not scalable to an industrial level. This work shows how to obtain polymer nanocomposites with good mechanical characteristics using multi-walled carbon nanotubes epoxy resins obtained by mechanical mixing only. The mechanical dispersion method illustrated in this work is easily scalable to industrial level. The high shearing force due to the complex field of motion produces a good and reproducible carbon nanotube dispersion. We have tested an industrial epoxy matrix with good baseline mechanical characteristics at different carbon nanotube weight loads. ASTM-derived tensile and compressive tests show an increment in both Young’s modulus and compressive strength compared with the pristine resin from a starting low wt %. Comparative vibration tests show improvement in the damping capacity. The new carbon nanotube enhanced epoxy resin has superior mechanical proprieties compared to the market average competitor, and is among the top products in the bi-components epoxy resins market. The new dispersion method shows significant potential for the industrial use of CNTs in epoxy matrices.
-
Giovannelli, Andrea; Di Maio, Dario; Scarpa, Fabrizio
2017-10-24
The majority of currently published dispersion protocols of carbon nanotubes rely on techniques that are not scalable to an industrial level. This work shows how to obtain polymer nanocomposites with good mechanical characteristics using multi-walled carbon nanotubes epoxy resins obtained by mechanical mixing only. The mechanical dispersion method illustrated in this work is easily scalable to industrial level. The high shearing force due to the complex field of motion produces a good and reproducible carbon nanotube dispersion. We have tested an industrial epoxy matrix with good baseline mechanical characteristics at different carbon nanotube weight loads. ASTM-derived tensile and compressive tests show an increment in both Young's modulus and compressive strength compared with the pristine resin from a starting low wt %. Comparative vibration tests show improvement in the damping capacity. The new carbon nanotube enhanced epoxy resin has superior mechanical proprieties compared to the market average competitor, and is among the top products in the bi-components epoxy resins market. The new dispersion method shows significant potential for the industrial use of CNTs in epoxy matrices.
-
Keyboard with Universal Communication Protocol Applied to CNC Machine
Directory of Open Access Journals (Sweden)
Mejía-Ugalde Mario
2014-04-01
Full Text Available This article describes the use of a universal communication protocol for industrial keyboard based microcontroller applied to computer numerically controlled (CNC machine. The main difference among the keyboard manufacturers is that each manufacturer has its own programming of source code, producing a different communication protocol, generating an improper interpretation of the function established. The above results in commercial industrial keyboards which are expensive and incompatible in their connection with different machines. In the present work the protocol allows to connect the designed universal keyboard and the standard keyboard of the PC at the same time, it is compatible with all the computers through the communications USB, AT or PS/2, to use in CNC machines, with extension to other machines such as robots, blowing, injection molding machines and others. The advantages of this design include its easy reprogramming, decreased costs, manipulation of various machine functions and easy expansion of entry and exit signals. The results obtained of performance tests were satisfactory, because each key has the programmed and reprogrammed facility in different ways, generating codes for different functions, depending on the application where it is required to be used.
-
van der Roer, Nicole; van Tulder, Maurits; van Mechelen, Willem; de Vet, Henrica
2008-02-15
Economic evaluation from a societal perspective conducted alongside a randomized controlled trial with a follow-up of 52 weeks. To evaluate the cost effectiveness and cost utility of an intensive group training protocol compared with usual care physiotherapy in patients with nonspecific chronic low back pain. The intensive group training protocol combines exercise therapy, back school, and behavioral principles. Two studies found a significant reduction in absenteeism for a graded activity program in occupational health care. This program has not yet been evaluated in a primary care physiotherapy setting. Participating physical therapists in primary care recruited 114 patients with chronic nonspecific low back pain. Eligible patients were randomized to either the protocol group or the guideline group. Outcome measures included functional status (Roland Morris Disability Questionnaire), pain intensity (11-point numerical rating scale), general perceived effect and quality of life (EuroQol-5D). Cost data were measured with cost diaries and included direct and indirect costs related to low back pain. After 52 weeks, the direct health care costs were significantly higher for patients in the protocol group, largely due to the costs of the intervention. The mean difference in total costs amounted to [Euro sign] 233 (95% confidence interval: [Euro sign] -2.185; [Euro sign] 2.764). The cost-effectiveness planes indicated no significant differences in cost effectiveness between the 2 groups. The results of this economic evaluation showed no difference in total costs between the protocol group and the guideline group. The differences in effects were small and not statistically significant. At present, national implementation of the protocol is not recommended.
-
Energetic and economic optimization of industrial systems compared
International Nuclear Information System (INIS)
LeGoff, P.; Rivero, R.; de Oliverira, S.; Schwarzer, B.
1990-01-01
Industrial processes can be represented as open systems where available energy (exergy) enters, utilized energy (exergy content of goods and services) exits and degraded energy (destroyed exergy) is rejected into the environment. The overall evaluation of each process can be made according to an energy accounting (in terms of exergy or of primary fossil energy) or a financial accounting (in terms of national or foreign currency). In any case, the process can be optimized by determining the best compromise between the costs of the various input fluxes. According to the needs of the decision maker one can choose the most convenient value criterion which would be to minimize: the total cost in national currency, for a project engineer working for a private company; the payments in foreign currency, for a public organization; the total energy consumption, for a hypothetical decision maker responsible for the world's non renewable fossil energy; the entropy production in order to increase the thermodynamic efficiency of the process. This paper presents and compares some examples of energetic and economic optimizations, according to various criteria. The examples given concern a heat exchanger, the drying of beet pulp and some heat transformers for upgrading industrial waste heat. Furthermore, the authors generalize the concept of pay-back time through the ratio of the invested capital cost and of the operating cost given in terms of exergy or of primary energy. Numerical values are given for an oil-fired boiler
-
75 FR 4323 - Additional Quantitative Fit-testing Protocols for the Respiratory Protection Standard
2010-01-27
...-mask and full face piece respirators are normally considered two different types of air purifying... article published in a peer-reviewed industrial-hygiene journal describing the protocol and explaining how... article from an industrial- hygiene journal describing the accuracy and reliability of these proposed...
-
Brehmer, Jess L; Husband, Jeffrey B
2014-10-01
There are relatively few studies in the literature that specifically evaluate accelerated rehabilitation protocols for distal radial fractures treated with open reduction and internal fixation (ORIF). The purpose of this study was to compare the early postoperative outcomes (at zero to twelve weeks postoperatively) of patients enrolled in an accelerated rehabilitation protocol with those of patients enrolled in a standard rehabilitation protocol following ORIF for a distal radial fracture. We hypothesized that patients with accelerated rehabilitation after volar ORIF for a distal radial fracture would have an earlier return to function compared with patients who followed a standard protocol. From November 2007 to November 2010, eighty-one patients with an unstable distal radial fracture were prospectively randomized to follow either an accelerated or a standard rehabilitation protocol after undergoing ORIF with a volar plate for a distal radial fracture. Both groups began with gentle active range of motion at three to five days postoperatively. At two weeks, the accelerated group initiated wrist/forearm passive range of motion and strengthening exercises, whereas the standard group initiated passive range of motion and strengthening at six weeks postoperatively. Patients were assessed at three to five days, two weeks, three weeks, four weeks, six weeks, eight weeks, twelve weeks, and six months postoperatively. Outcomes included Disabilities of the Arm, Shoulder and Hand (DASH) scores (primary outcome) and measurements of wrist flexion/extension, supination, pronation, grip strength, and palmar pinch. The patients in the accelerated group had better mobility, strength, and DASH scores at the early postoperative time points (zero to eight weeks postoperatively) compared with the patients in the standard rehabilitation group. The difference between the groups was both clinically relevant and statistically significant. Patients who follow an accelerated rehabilitation
-
International Nuclear Information System (INIS)
Steinhaeusler, F.; Wieland, P.
2000-01-01
Concerns of political decision makers, the media, and members of the public with regard to high-tech industries focus upon two main issues: safety and socio-economic impact. In this regard the nuclear industry and biotechnology, commonly associated as 'high risk and low trust situation', face the problems of the assessment of potentially dangerous or negative socio-economic consequences of very improbable risks and the communication with the various audiences. It is common for the national authorities in this case to conduct the process of quantified risk analysis (QRA). Unfortunately, hitherto the communication of the results obtained by QRA to the different non-scientific/non-technical target groups listed above is generally dissatisfactory, resulting in the frequent rejection of nuclear- and biotechnology. The main reason is that it has generally not been recognized that QRA is but the final step in the cognition of risk from both real as well as perceived hazards, preceded by risk estimation (RES) and risk evaluation (REV). RES is largely the scientific identification of hazards leading formally to the assessment of mechanisms of harmful consequences, and latterly to the assessment of the probability of its occurrence. Contrary to that, REV deals with the subjective judgment of the significance of assessed individual and societal risks. As such, REV involves individual cognitions of hazards and risks, such as perceptions, knowledge and understanding. In this paper the role of risk cognition in communicating issues associated with high-tech industrial activities, such as nuclear industry and biotechnology, is discussed. Common factors influencing risk perception are dealt with in a comparative manner in order to draw practically applicable lessons from it. This comparative analysis revealed the following results: (1)QRA-derived risk estimation measures used to quantify the risk from potential hazard associated with high-tech industries per se are not suitable
-
van der Roer, N.; van Tulder, M.; van Mechelen, W.; de Vet, H.C.W.
2008-01-01
STUDY DESIGN. Economic evaluation from a societal perspective conducted alongside a randomized controlled trial with a follow-up of 52 weeks. OBJECTIVE. To evaluate the cost effectiveness and cost utility of an intensive group training protocol compared with usual care physiotherapy in patients with
-
Dosimetry study comparing NCS report-2 versus IAEA TRS-398 protocol for high energy photon beams
International Nuclear Information System (INIS)
Attalaa, E.M.; Khaled, N.E.; Abou Elenein, H.S.; Elsayed, A.A.
2005-01-01
In this work a dosimetry study is presented in which the results of absorbed dose determined at reference condition according to the IAEA TRS-398 protocol and the NCS report-2 are compared. The IAEA TRS-398 protocol for absorbed dose calibration is based on ionization chamber having absorbed dose to water calibration factor N d w, while the NCS-2 dosimetry report for absorbed dose calibration is based on an ionization chamber having air- kerma calibration factor N k . This study shows that the absorbed dose which is calculated with The IAEA TRS-398 formalisms is higher than that calculated with NCS report-2 formalisms within range from 0.4 to 0.9% in cobalt-60 beam as sensed by different ionization chambers, and from 0.2 to 1.1% for different higher energy photon beams of 6, 8 and 18 MV. The chambers used are PTW 30001, 30004, and NE-2571; which have calibration factors N k and N d w traceable to the BIPM (Bureau International des Poids et Mesures)
-
Directory of Open Access Journals (Sweden)
Arash Mohagheghi
2017-01-01
Full Text Available Introduction. Neurofeedback (NF is an adjuvant or alternative therapy for children with Attention Deficit Hyperactivity Disorder (ADHD. This study intended to compare the efficacy of two different NF protocols on clinical and cognitive symptoms of ADHD. Materials and Methods. In this clinical trial, sixty children with ADHD aged 7 to 10 years old were randomly grouped to receive two different NF treatments (theta suppression/beta enhancement protocol and theta suppression/alpha enhancement protocol. Clinical and cognitive assessments were conducted prior to and following the treatment and also after an eight-week follow-up. Results. Both protocols alleviated the symptoms of ADHD in general (p<0.001, hyperactivity (p<0.001, inattention (p<0.001, and omission errors (p<0.001; however, they did not affect the oppositional and impulsive scales nor commission errors. These effects were maintained after an eight-week intervention-free period. The only significant difference between the two NF protocols was that high-frequency alpha enhancement protocol performed better in suppressing omission errors (p<0.001. Conclusion. The two NF protocols with theta suppression/beta enhancement and theta suppression/alpha enhancement have considerable and comparable effect on clinical symptoms of ADHD. Alpha enhancement protocol was more effective in suppressing omission errors.
-
Re-verification of a Lip Synchronization Protocol using Robust Reachability
Directory of Open Access Journals (Sweden)
Piotr Kordy
2010-03-01
Full Text Available The timed automata formalism is an important model for specifying and analysing real-time systems. Robustness is the correctness of the model in the presence of small drifts on clocks or imprecision in testing guards. A symbolic algorithm for the analysis of the robustness of timed automata has been implemented. In this paper, we re-analyse an industrial case lip synchronization protocol using the new robust reachability algorithm. This lip synchronization protocol is an interesting case because timing aspects are crucial for the correctness of the protocol. Several versions of the model are considered: with an ideal video stream, with anchored jitter, and with non-anchored jitter.
-
Process industry properties in nuclear industry
International Nuclear Information System (INIS)
Zheng Hualing
2005-01-01
In this article the writer has described the definition of process industry, expounded the fact classifying nuclear industry as process industry, compared the differences between process industry and discrete industry, analysed process industry properties in nuclear industry and their important impact, and proposed enhancing research work on regularity of process industry in nuclear industry. (authors)
-
The road from Kyoto : A U.S. industry view
Energy Technology Data Exchange (ETDEWEB)
O`Keefe, W.F. [American Petroleum Inst., Washington, DC (United States)
1998-05-01
An American industry perspective of the Kyoto Protocol and its ability to produce a viable solution to global warming was offered. The Protocol would require most industrialized nations (including Canada and the United States) to cut their carbon dioxide emissions by 6 to 8 per cent below 1990 levels by year 2008 to 2012. Developing countries would not have to meet this target. It was argued that this set of targets and timetables assumes that climate risks are known with great certainty, when in fact, the long term risks of climate change are highly uncertain and near-term risks are small. It was also argued that developing countries account for more than half of the growth in CO{sub 2} emissions, therefore, their exemption from the Kyoto Protocol would make the Protocol ineffective against even a moderate warming scenario. Furthermore, the Protocol has the potential to create reactionary incentives for energy-intensive industries to move their facilities and jobs to countries without the curbs on CO{sub 2} emissions. It was suggested that a better climate policy would include all countries in CO{sub 2} reductions. It would be less expensive to achieve a target CO{sub 2} atmospheric concentration by curbing emissions slowly at first, developing technology to do so more cheaply and moving more aggressively in later years. The reality is that if the climate policy is too expensive, it is less practical and more difficult to achieve, both economically and politically. 1 tab., 2 figs.
-
Campagne, Fabien
2008-02-29
The evaluation of information retrieval techniques has traditionally relied on human judges to determine which documents are relevant to a query and which are not. This protocol is used in the Text Retrieval Evaluation Conference (TREC), organized annually for the past 15 years, to support the unbiased evaluation of novel information retrieval approaches. The TREC Genomics Track has recently been introduced to measure the performance of information retrieval for biomedical applications. We describe two protocols for evaluating biomedical information retrieval techniques without human relevance judgments. We call these protocols No Title Evaluation (NT Evaluation). The first protocol measures performance for focused searches, where only one relevant document exists for each query. The second protocol measures performance for queries expected to have potentially many relevant documents per query (high-recall searches). Both protocols take advantage of the clear separation of titles and abstracts found in Medline. We compare the performance obtained with these evaluation protocols to results obtained by reusing the relevance judgments produced in the 2004 and 2005 TREC Genomics Track and observe significant correlations between performance rankings generated by our approach and TREC. Spearman's correlation coefficients in the range of 0.79-0.92 are observed comparing bpref measured with NT Evaluation or with TREC evaluations. For comparison, coefficients in the range 0.86-0.94 can be observed when evaluating the same set of methods with data from two independent TREC Genomics Track evaluations. We discuss the advantages of NT Evaluation over the TRels and the data fusion evaluation protocols introduced recently. Our results suggest that the NT Evaluation protocols described here could be used to optimize some search engine parameters before human evaluation. Further research is needed to determine if NT Evaluation or variants of these protocols can fully substitute
-
Energy Technology Data Exchange (ETDEWEB)
Fitzpatrick, L.C.; Goven, A.J. [Univ. of North Texas, Denton, TX (United States); Muratti-Ortiz, J.F. [City of Denton Water/Wastewater Laboratory, TX (United States); Venables, B.J. [TRAC Laboratories Inc., Denton, TX (United States)
1996-07-01
Earthworms are ideal soil organisms for use in terrestrial ecotoxicology. As such, several earthworm protocols have been developed for testing toxic potential of chemicals and contaminated soils. Of these, the 48-h filter paper contact (FP) and the 14-d artificial soil exposure (AS) protocols, using mortality (LC50) as the toxic endpoint and Eisenia fetida as the test species, have received the most attention, with the latter being adopted by both OECD and EEC in Europe and the Environmental Protection Agency (USEPA) in the United States. Although the FP technique, adopted by EEC, provides for inexpensive reproducible toxicity screening for chemicals (i.e. establishing relative toxicities), it has been criticized for lacking the ecotoxicological relevance of the AS protocol. Choice of earthworm species for laboratory testing also has been controversial. The manure worm, E. fetida, is criticized for not being sufficiently sensitive to chemicals or representative of {open_quotes}typical{close_quotes} earthworms. Lumbricus terrestris and Apporectodea caliginosa have been suggested as more sensitive and ecologically relevant earthworms by Dean-Ross and Martin, respectively. This paper compares the AS and FP protocols in assessing toxicity of cadminum to L. terrestris and E. fetida using LC50s and LC50s. 19 refs., 2 tabs.
-
International Nuclear Information System (INIS)
Rani, Deepa; Kaisar, Sushma; Awasare, Sushma; Kamaldeep; Abhyankar, Amit; Basu, Sandip
2014-01-01
Recombinant human thyroid-stimulating hormone (rhTSH)-based protocol is a promising recent development in the management of differentiated thyroid carcinoma (DTC). The objectives of this prospective study were: (1) to assess the feasibility and efficacy of the rhTSH primed 131 I therapy protocol in patients with DTC with distant metastatic disease, (2) to perform lesional dosimetry in this group of patients compared to the traditional protocol, (3) to document the practical advantages (patient symptoms and hospital stay) of the rhTSH protocol compared to the traditional thyroid hormone withdrawal protocol, (4) to document and record any adverse effect of this strategy, (5) to compare the renal function parameters, and (6) to compare the serum TSH values achieved in either of the protocols in this group of patients. The study included 37 patients with metastatic DTC having lung or skeletal metastases or both. A comparison of lesional radiation absorbed dose, hospital stay, renal function tests, and symptom profile was undertaken between the traditional thyroid hormone withdrawal protocol and rhTSH-based therapy protocol. Dosimetric calculations of metastatic lesions were performed using lesion uptake and survey meter readings for calculation of effective half-life. Non-contrast-enhanced CT was used for assessment of tumor volume. Quality of life was assessed using the European Organization for Research and Treatment of Cancer (EORTC) QOL forms. A comparison of pretreatment withdrawal thyroglobulin (TG) was done with the withdrawal TG level 3 months after treatment. The mean effective half-life of 131 I in metastatic lesions was less during the rhTSH protocol (29.49 h) compared to the thyroid hormone withdrawal protocol (35.48 h), but the difference was not statistically significant (p = 0.056). The mean 24-h % uptake of the lesions during the traditional protocol (4.84 %) was slightly higher than the 24-h % uptake during the rhTSH protocol (3.56 %), but the
-
Energy Technology Data Exchange (ETDEWEB)
Puertolas Domenech, L.; Rieradevall Sant, M.; Prat Fornells, N.
2007-07-01
The implementation of the Water Framework directive (WFD, Directive 2000/60/CE) requires the establishment of standardized sampling protocols for the assessment of benthic fauna. In this paper, a comparative study of several sampling protocols that are used currently in Spain and Europe (AQEM, EPA and Guadalmed) has been carried out. Evaluating the three protocols with a list of 12 criteria, Guadalmed fits better to the most of them. therefore it appears as an efficient tool in the determination of Ecological Status. (Author)
-
Kasenda, Benjamin; Schandelmaier, Stefan; Sun, Xin; von Elm, Erik; You, John; Blümle, Anette; Tomonaga, Yuki; Saccilotto, Ramon; Amstutz, Alain; Bengough, Theresa; Meerpohl, Joerg J; Stegert, Mihaela; Olu, Kelechi K; Tikkinen, Kari A O; Neumann, Ignacio; Carrasco-Labra, Alonso; Faulhaber, Markus; Mulla, Sohail M; Mertz, Dominik; Akl, Elie A; Bassler, Dirk; Busse, Jason W; Ferreira-González, Ignacio; Lamontagne, Francois; Nordmann, Alain; Gloy, Viktoria; Raatz, Heike; Moja, Lorenzo; Rosenthal, Rachel; Ebrahim, Shanil; Vandvik, Per O; Johnston, Bradley C; Walter, Martin A; Burnand, Bernard; Schwenkglenks, Matthias; Hemkens, Lars G; Bucher, Heiner C; Guyatt, Gordon H; Briel, Matthias
2014-07-16
To investigate the planning of subgroup analyses in protocols of randomised controlled trials and the agreement with corresponding full journal publications. Cohort of protocols of randomised controlled trial and subsequent full journal publications. Six research ethics committees in Switzerland, Germany, and Canada. 894 protocols of randomised controlled trial involving patients approved by participating research ethics committees between 2000 and 2003 and 515 subsequent full journal publications. Of 894 protocols of randomised controlled trials, 252 (28.2%) included one or more planned subgroup analyses. Of those, 17 (6.7%) provided a clear hypothesis for at least one subgroup analysis, 10 (4.0%) anticipated the direction of a subgroup effect, and 87 (34.5%) planned a statistical test for interaction. Industry sponsored trials more often planned subgroup analyses compared with investigator sponsored trials (195/551 (35.4%) v 57/343 (16.6%), P<0.001). Of 515 identified journal publications, 246 (47.8%) reported at least one subgroup analysis. In 81 (32.9%) of the 246 publications reporting subgroup analyses, authors stated that subgroup analyses were prespecified, but this was not supported by 28 (34.6%) corresponding protocols. In 86 publications, authors claimed a subgroup effect, but only 36 (41.9%) corresponding protocols reported a planned subgroup analysis. Subgroup analyses are insufficiently described in the protocols of randomised controlled trials submitted to research ethics committees, and investigators rarely specify the anticipated direction of subgroup effects. More than one third of statements in publications of randomised controlled trials about subgroup prespecification had no documentation in the corresponding protocols. Definitive judgments regarding credibility of claimed subgroup effects are not possible without access to protocols and analysis plans of randomised controlled trials. © The DISCO study group 2014.
-
Application of microwave assisted digestion in industrial hygiene
International Nuclear Information System (INIS)
Paudyn, A.M.; Smith, R.G.; Gawlowski, E.
1990-01-01
Microwave assisted digestion plays an important role in speeding up acquisition of analytical data for industrial hygiene purposes. This paper will compare hot plate and microwave assisted digestion for the determination of elements in industrial samples (air sampling filters, dusts, ashes, paints) by the ICPAES technique. Also, the determination of radionuclides in environmental samples (soils, sediments, rocks) by alpha, beta and gamma spectroscopy after the dissolution in a microwave oven will be presented. The results on the determination of elements in NIST standard reference materials and radionuclides in IAEA standards will be included. QC/QA protocols used in an occupational health laboratory setting will be discussed. Sample preparation using microwave assisted digestion proved not only to speed-up extraction of acid soluble elements, but also to achieve better recovery of some elements (Pb in paints) and give better reproducibility of determinations
-
Specification and Validation of an Edge Router Discovery Protocol for Mobile Ad Hoc Networks
DEFF Research Database (Denmark)
Kristensen, Lars Michael; Jensen, Kurt
2004-01-01
We present an industrial project at Ericsson Telebit A/S where Coloured Petri Nets (CP-nets or CPNs) have been used for the design and specification of an edge router discovery protocol for mobile ad-hoc networks. The Edge Router Discovery Protocol (ERDP) supports an edge router in a stationary...
-
International Nuclear Information System (INIS)
Stewart, K.J.; Seuntjens, J.P.
2002-01-01
Recent absorbed-dose-based protocols allow for two methods of calibrating electron beams using plane-parallel chambers, one using the N D,w Co for a plane-parallel chamber, and the other relying on cross-calibration of the plane-parallel chamber in a high-energy electron beam against a cylindrical chamber which has an N D,w Co factor. The second method is recommended as it avoids problems associated with the P wall correction factors at 60 Co for plane-parallel chambers which are used in the determination of the beam quality conversion factors. In this article we investigate the consistency of these two methods for the PTW Roos, Scanditronics NACP02, and PTW Markus chambers. We processed our data using both the AAPM TG-51 and the IAEA TRS-398 protocols. Wall correction factors in 60 Co beams and absorbed-dose beam quality conversion factors for 20 MeV electrons were derived for these chambers by cross-calibration against a cylindrical ionization chamber. Systematic differences of up to 1.6% were found between our values of P wall and those from the Monte Carlo calculations underlying AAPM TG-51, and up to 0.6% when comparing with the IAEA TRS-398 protocol. The differences in P wall translate directly into differences in the beam quality conversion factors in the respective protocols. The relatively large spread in the experimental data of P wall , and consequently the absorbed-dose beam quality conversion factor, confirms the importance of the cross-calibration technique when using plane-parallel chambers for calibrating clinical electron beams. We confirmed that for well-guarded plane-parallel chambers, the fluence perturbation correction factor at d max is not significantly different from the value at d ref . For the PTW Markus chamber the variation in the latter factor is consistent with published fits relating it to average energy at depth
-
Hao, Yanni; Thomas, Adrian
2013-08-01
We briefly review the characteristics of several established health technology assessment (HTA) programs in industrialized societies including Germany, the UK and France. Special attention is paid on two issues: the position of HTA in coverage decision making and the role of economic assessment in evaluation processes. Although law makers in the USA have barred the use of NICE's cost/quality-adjusted life year or similar health economics approaches by public payers for coverage decision making, there are suggestions of prioritizing relative efficacy evaluation over economic assessment under a comparative effectiveness research (CER) framework to inform payment rates of public payers (an approach similar to German and French HTA processes). However, such an approach is unlikely to prove viable. It should also be noted that, if cost considerations are made explicit in US CER policy decisions, CER may become an unsustainable approach undermined by a conflicting emphasis on both cost containment and a demand for costly comparative evidence. On the other hand, properly designed CER initiatives can serve as a facilitator of more efficient research activities and drug development models. With these points in mind, the likely pathway of US CER is explored and the plausible impact on industry innovation is discussed.
-
DEFF Research Database (Denmark)
Riber-Hansen, Rikke; Hastrup, N; Clemmensen, O.
2010-01-01
EORTC recommended protocol for melanoma sentinel lymph node sectioning misclassifies up to 50% of the patients compared with complete step sectioning. Danish Society for Pathological Anatomy and Clinical Cytology......EORTC recommended protocol for melanoma sentinel lymph node sectioning misclassifies up to 50% of the patients compared with complete step sectioning. Danish Society for Pathological Anatomy and Clinical Cytology...
-
Energy and Process Assessment Protocol for Industrial Buildings
2007-05-01
condenser surfaces of fouling 6.31 Raise evaporator or lower condenser water temperature 6.2 Optimize chiller sequencing 6.33 Use two-speed or...F increase in CHW supply setpoint the chiller compression motor load will DECREASE 1.5 percent. This is a zero cost ECO. 3.5 Decrease Conden. CTW...energy assessments, universities conducting energy assessment, and Energy Service Performance Contractors) perform Industrial and Energy Optimization
-
Wireless sensors in industrial time-critical environments
Cecilio, José
2013-01-01
This book introduces the components, operations, industry protocols and standards of distributed control system (DCS), and shows how to include wireless technology in their design while guaranteeing the desired operation characteristics.
-
Comparative analyses of industrial-scale human platelet lysate preparations.
Pierce, Jan; Benedetti, Eric; Preslar, Amber; Jacobson, Pam; Jin, Ping; Stroncek, David F; Reems, Jo-Anna
2017-12-01
Efforts are underway to eliminate fetal bovine serum from mammalian cell cultures for clinical use. An emerging, viable replacement option for fetal bovine serum is human platelet lysate (PL) as either a plasma-based or serum-based product. Nine industrial-scale, serum-based PL manufacturing runs (i.e., lots) were performed, consisting of an average ± standard deviation volume of 24.6 ± 2.2 liters of pooled, platelet-rich plasma units that were obtained from apheresis donors. Manufactured lots were compared by evaluating various biochemical and functional test results. Comprehensive cytokine profiles of PL lots and product stability tests were performed. Global gene expression profiles of mesenchymal stromal cells (MSCs) cultured with plasma-based or serum-based PL were compared to MSCs cultured with fetal bovine serum. Electrolyte and protein levels were relatively consistent among all serum-based PL lots, with only slight variations in glucose and calcium levels. All nine lots were as good as or better than fetal bovine serum in expanding MSCs. Serum-based PL stored at -80°C remained stable over 2 years. Quantitative cytokine arrays showed similarities as well as dissimilarities in the proteins present in serum-based PL. Greater differences in MSC gene expression profiles were attributable to the starting cell source rather than with the use of either PL or fetal bovine serum as a culture supplement. Using a large-scale, standardized method, lot-to-lot variations were noted for industrial-scale preparations of serum-based PL products. However, all lots performed as well as or better than fetal bovine serum in supporting MSC growth. Together, these data indicate that off-the-shelf PL is a feasible substitute for fetal bovine serum in MSC cultures. © 2017 AABB.
-
Directory of Open Access Journals (Sweden)
Anas Ali Hussien
2018-02-01
Full Text Available The wireless sensor network (WSN consists mostly of a large number of nodes in a large area where not all nodes are directly connected. The applications of comprise a wide variety of scenarios.The mobile nodes are free to move because this network has selfــstructured topology. Routing protocols are responsible for detecting and maintaining paths in the network, and it classified into reactive (OnـــDemand, proactive (Table driven, and hybrid. In this paper represents a performance study of some WSN routing protocols: the Dynamic Source Routing (DSR, Ad hoc On-Demand Distance Vector (AODV, and Destination-Sequenced Distance-Vector (DSDV. The comparison made according to important metrics like packet delivery ratio (PDR, total packets dropped, Average end-to-end delay (Avg EED, and normalized routing load under the Transmission Control Protocol (TCP and User Datagram Protocol (UDP traffic connection and with varying number of nodes, pause time; and varying speed. In this work used (NSــ2.35 that installed on (Ubuntu 14.04 operating system to implementing the scenario. Conclude that the DSR has better performance in TCP connection; while the DSDV has better performance in UDP protocol.
-
Nonblocking and orphan free message logging protocols
Alvisi, Lorenzo; Hoppe, Bruce; Marzullo, Keith
1992-12-01
Currently existing message logging protocols demonstrate a classic pessimistic vs. optimistic tradeoff. We show that the optimistic-pessimistic tradeoff is not inherent to the problem of message logging. We construct a message-logging protocol that has the positive features of both optimistic and pessimistic protocol: our protocol prevents orphans and allows simple failure recovery; however, it requires no blocking in failure-free runs. Furthermore, this protocol does not introduce any additional message overhead as compared to one implemented for a system in which messages may be lost but processes do not crash.
-
Energy Technology Data Exchange (ETDEWEB)
Rani, Deepa; Kaisar, Sushma; Awasare, Sushma; Kamaldeep; Abhyankar, Amit; Basu, Sandip [Bhabha Atomic Research Centre (BARC), Radiation Medicine Centre, Mumbai (India)
2014-09-15
Recombinant human thyroid-stimulating hormone (rhTSH)-based protocol is a promising recent development in the management of differentiated thyroid carcinoma (DTC). The objectives of this prospective study were: (1) to assess the feasibility and efficacy of the rhTSH primed {sup 131}I therapy protocol in patients with DTC with distant metastatic disease, (2) to perform lesional dosimetry in this group of patients compared to the traditional protocol, (3) to document the practical advantages (patient symptoms and hospital stay) of the rhTSH protocol compared to the traditional thyroid hormone withdrawal protocol, (4) to document and record any adverse effect of this strategy, (5) to compare the renal function parameters, and (6) to compare the serum TSH values achieved in either of the protocols in this group of patients. The study included 37 patients with metastatic DTC having lung or skeletal metastases or both. A comparison of lesional radiation absorbed dose, hospital stay, renal function tests, and symptom profile was undertaken between the traditional thyroid hormone withdrawal protocol and rhTSH-based therapy protocol. Dosimetric calculations of metastatic lesions were performed using lesion uptake and survey meter readings for calculation of effective half-life. Non-contrast-enhanced CT was used for assessment of tumor volume. Quality of life was assessed using the European Organization for Research and Treatment of Cancer (EORTC) QOL forms. A comparison of pretreatment withdrawal thyroglobulin (TG) was done with the withdrawal TG level 3 months after treatment. The mean effective half-life of {sup 131}I in metastatic lesions was less during the rhTSH protocol (29.49 h) compared to the thyroid hormone withdrawal protocol (35.48 h), but the difference was not statistically significant (p = 0.056). The mean 24-h % uptake of the lesions during the traditional protocol (4.84 %) was slightly higher than the 24-h % uptake during the rhTSH protocol (3.56 %), but
-
The downstream industry compared to market; L'aval face au marche. Quelques elements de contexte
Energy Technology Data Exchange (ETDEWEB)
Chevallier, B.
2010-02-15
J.L. Schilansky introduces here the difficult question of the downstream industry compared to market in recalling the recent structural changes (behaviour of customers, behaviour of the USA- and China-governments), the increase of the European and French regulations, the climatic change and the conjectural impact of the crisis on the refining industry. (O.M.)
-
SIP protocol model for OMNET++
Directory of Open Access Journals (Sweden)
Jan Kucerak
2016-01-01
Full Text Available The article describes our new SIP protocol implementation for the OMNeT++ simulation framework. OMNeT++ simulation framework provides an extensive support of IP related protocols, nevertheless a working SIP protocol implementation is missing. Real measurements were also done using a SIPp traffic generator and the results are compared to those obtained by our new SIP model. Since this work is a part of bigger project concerned strictly on measuring "first response times" over networks with a faulty transmission links, the actually collected statistics are focused only this way.
-
Laursen, Esben Skov; Møller, Louise
2015-01-01
This paper describes a case study comparing the understanding of design intent between industrial designers and design engineers. The study is based on the hypothesis that it is not all aspects of the design intent that are equally difficult to share between industrial designers and design engineers in the product development process. The study builds on five semi-structured interviews, where two industrial designers and three design engineers were interviewed about different aspects of the design intent. Based on our results, there seem to be indications that the more complex and abstract elements of industrial design knowledge such as the meaning, semantics, values, emotions and social aspects of the product are less shared by the design engineers. Moreover, the results also indicate that the different aspects of the design intent are perceived separately, rather than as part of a whole by the design engineers. The connection between the different aspects of the design intent is not shared between the industrial designer and design engineer making the shared knowledge less meaningful to the design engineers. The results of this study cannot be claimed to be conclusive due to the limited empirical material. Further investigation and analytically richer data are required in order to verify and broaden the findings. More case studies have therefore been planned in order to understand the area better.
-
The index of harm: a useful measure for comparing occupational risk across industries
International Nuclear Information System (INIS)
Solomon, K.A.; Abraham, S.C.
1980-01-01
This paper presents an index of harm methodology which compares occupational risk among workers exposed to radiological and nonradiological harms. It extends the work of the International Commission on Radiological Protection by considering American rather than European and Japanese industry groups, by treating the relative importance of various occupational harms as a parameter rather than an arbitrary constant, and by identifying several ways in which both the methodology and the data base could be improved. In the analysis, the risk affects are examined of six occupational harms-three nonradiological (death, accidental injury and disease or illness) and three radiological (somatic effects, genetic effects, and somatic effects to the fetus or embryo of pregnant women). The analysis was performed under five different assumptions about the relative importance of degree of aversion of the six harms in question. The results of this analysis show that radiological workers exposed to the current industry average of 0.35 rem/yr are among the safest of all industry groupings, and the riskiest industries appear to be mining; agriculture, fishing and farming; construction; transportation; and manufacturing, roughly in that order. (author)
-
Treatment of childhood encopresis: a randomized trial comparing three treatment protocols.
Borowitz, Stephen M; Cox, Daniel J; Sutphen, James L; Kovatchev, Boris
2002-04-01
To compare short- and long-term effectiveness of three additive treatment protocols in children experiencing chronic encopresis. Children, 6 to 15 years of age, who experienced at least weekly fecal soiling for 6 months or longer were eligible for the study. Children were randomly assigned to a group that received intensive medical therapy (IMT), a group that received intensive medical therapy plus a behavior management program called enhanced toilet training (ETT), or a group that received intensive medical therapy with enhanced toilet training and external anal sphincter electromyographic biofeedback (BF). Data concerning toileting habits were collected for 14 consecutive days before an initial visit, and at 3, 6, and 12 months after initiation of therapy. All data were collected using a computerized voice-mail system that telephoned the families each day. At 12 months, children were classified as significantly improved (reduction in soiling, P 0.90, P encopresis than either intensive medical therapy or anal sphincter biofeedback therapy. Although similar total cure rates at 1 year can be expected with these three forms of therapy, enhanced toilet training results in statistically significant decreases in the daily frequency of soiling for the greatest number of children.
-
Khan, Anwar; Ali, Ihsan; Ghani, Abdullah; Khan, Nawsher; Alsaqer, Mohammed; Rahman, Atiq Ur; Mahmood, Hasan
2018-05-18
Recent research in underwater wireless sensor networks (UWSNs) has gained the attention of researchers in academia and industry for a number of applications. They include disaster and earthquake prediction, water quality and environment monitoring, leakage and mine detection, military surveillance and underwater navigation. However, the aquatic medium is associated with a number of limitations and challenges: long multipath delay, high interference and noise, harsh environment, low bandwidth and limited battery life of the sensor nodes. These challenges demand research techniques and strategies to be overcome in an efficient and effective fashion. The design of routing protocols for UWSNs is one of the promising solutions to cope with these challenges. This paper presents a survey of the routing protocols for UWSNs. For the ease of description, the addressed routing protocols are classified into two groups: localization-based and localization-free protocols. These groups are further subdivided according to the problems they address or the major parameters they consider during routing. Unlike the existing surveys, this survey considers only the latest and state-of-the-art routing protocols. In addition, every protocol is described in terms of its routing strategy and the problem it addresses and solves. The merit(s) of each protocol is (are) highlighted along with the cost. A description of the protocols in this fashion has a number of advantages for researchers, as compared to the existing surveys. Firstly, the description of the routing strategy of each protocol makes its routing operation easily understandable. Secondly, the demerit(s) of a protocol provides (provide) insight into overcoming its flaw(s) in future investigation. This, in turn, leads to the foundation of new protocols that are more intelligent, robust and efficient with respect to the desired parameters. Thirdly, a protocol can be selected for the appropriate application based on its described
-
Report: demonstrable progresses of the France according the Kyoto protocol
International Nuclear Information System (INIS)
2006-06-01
This document constitutes the report of the France on the demonstrable progresses according the application of the 3 article of the Kyoto protocol. The first chapter is a description of the french climatic policy, as the second presents the tendencies and the projections concerning the greenhouse effect gases emissions. The chapter 3 details the policies effects and the measures ( energy, transport, industry and wastes). The last chapter is devoted to the respect of the other engagements articles 10 and 11 of the Kyoto protocol. (A.L.B.)
-
Reduction of greenhouse gas in power industry by emission trading system
Energy Technology Data Exchange (ETDEWEB)
Lee, Eun Myung; Lee, Kee Hoon [Korea Energy Economics Institute, Euiwang (Korea)
1999-04-01
The rules governing their implementation and operation for implementing the Kyoto Protocol including emissions permit trading, project-based credit trading and the Clean Development Mechanism are to be decided at future talks. How these policies are eventually designed will determine the effectiveness of the Protocol. However, it has been passive and insufficient to deal with the Kyoto Protocol since there is no obligation on reduction of greenhouse gas emissions. Therefore, the issues on emissions permit trading are analyzed and the strategies for utilizing the Kyoto mechanism effectively are presented through reviewing the existing negotiation strategies. Moreover, how to use emissions permit trading in the power industry, the largest greenhouse gas emissions industry, is examined by dividing into two sections, domestic and abroad. (author). 62 refs., 2 figs., 42 tabs.
-
Directory of Open Access Journals (Sweden)
Lagerev I.A.
2016-09-01
Full Text Available The article presents results of comparative analysis of hydraulic crane-manipulator installations of mobile transport and technological machines and hydraulic manipulators of industrial robots. The comparative analysis is based on consid-eration of a wide range of types and sizes indicated technical devices of both domestic and foreign production: 1580 structures of cranes and more than 450 structures of industrial robots. It was performed in the following areas: func-tional purpose and basic technical characteristics; a design; the loading conditions of the model and failures in operation process; approaches to the design, calculation methods and mathematical modeling. The conclusions about the degree of similarity and the degree of difference hydraulic crane-manipulator installations of transport and technological ma-chines and hydraulic industrial robot manipulators from the standpoint of their design and modeling occurring in them during operation of dynamic and structural processes.
-
Implementing a protocol for selection and prioritisation of organic ...
African Journals Online (AJOL)
2012-07-09
Jul 9, 2012 ... To safeguard drinking water industry customers, it was necessary to develop a generic protocol to assist with ... This is a very important guide to assist water utilities in optimising their resources while not ..... views and experience of the various experts. ...... wastewater by an innovative biological technology.
-
Koo, M; Sabaté, A; Magalló, P; García, M A; Domínguez, J; de Lama, M E; López, S
2011-11-01
To assess conservative treatment of splenic injury due to trauma, following a protocol for computed tomography (CT) and angiographic embolization. To quantify the predictive value of CT for detecting bleeding and need for embolization. The care protocol developed by the multidisciplinary team consisted of angiography with embolization of lesions revealed by contrast extravasation under CT as well as embolization of grade III-V injuries observed, or grade I-II injuries causing hemodynamic instability and/or need for blood transfusion. We collected data on demographic variables, injury severity score (ISS), angiographic findings, and injuries revealed by CT. Pre-protocol and post-protocol outcomes were compared. The sensitivity and specificity of CT findings were calculated for all patients who required angiographic embolization. Forty-four and 30 angiographies were performed in the pre- and post-protocol periods, respectively. The mean (SD) ISSs in the two periods were 25 (11) and 26 (12), respectively. A total of 24 (54%) embolizations were performed in the pre-protocol period and 28 (98%) after implementation of the protocol. Two and 7 embolizations involved the spleen in the 2 periods, respectively; abdominal laparotomies numbered 32 and 25, respectively, and 10 (31%) vs 4 (16%) splenectomies were performed. The specificity and sensitivity values for contrast extravasation found on CT and followed by embolization were 77.7% and 79.5%. The implementation of this multidisciplinary protocol using CT imaging and angiographic embolization led to a decrease in the number of splenectomies. The protocol allows us to take a more conservative treatment approach.
-
Modelling, Verification, and Comparative Performance Analysis of the B.A.T.M.A.N. Protocol
Chaudhary, Kaylash; Fehnker, Ansgar; Mehta, Vinay; Hermanns, Holger; Höfner, Peter
2017-01-01
This paper considers on a network routing protocol known as Better Approach to Mobile Ad hoc Networks (B.A.T.M.A.N.). The protocol serves two aims: first, to discover all bidirectional links, and second, to identify the best-next-hop for every other node in the network. A key element is that each
-
An one-time-pad key communication protocol with entanglement
Cai, Qing-yu
2003-01-01
We present an one-time-pad key communication protocol that allows secure direct communication with entanglement. Alice can send message to Bob in a deterministic manner by using local measurements and public communication. The theoretical efficiency of this protocol is double compared with BB84 protocol. We show this protocol is unconditional secure under arbitrary quantum attack. And we discuss that this protocol can be perfectly implemented with current technologies.
-
Consequences of optional protocol agreements for the Dutch industry. Most important results
International Nuclear Information System (INIS)
Beumer, L.; Van der Tak, C.M.; Molemaker, R.J.; Melissen, P.; Wilbers, C.A.J.; Van Duyse, P.; Sedee, C.
1997-01-01
The study on the title subject comprises several (English) sub-studies in which the environmental and economic consequences of optional international agreements to reduce greenhouse gas emissions are summarized for the Dutch sectors air transport, maritime transport, petrochemical industry, fertilizer industry, and the iron- and steel industry. For the first two sectors the impacts of fuel taxes are analyzed while for the other sectors the effects of energy efficiency measures are analyzed. The appendices contain executive summaries of the English sub-studies. 5 appendices
-
Kyoto protocol and its implementation in pakistan: hurdles and expectations
International Nuclear Information System (INIS)
Iqbal, S.; Sher, H.A.; Qureshi, S.A
2010-01-01
In 1997 Kyoto protocol was adopted at the third session of Conference of the parties of UNFCC in Kyoto, Japan. This protocol restricts the industrialized countries and those in transition to a market economy agreed to limit or reduce their emissions. In Pakistan the government is also taking steps to reduce the pollution. This paper discusses the possible low carbon emitting electricity generation options by keeping in view the current energy scenario of Pakistan and the new energy policy announced by the Government of Pakistan for renewable energy promotion. (author)
-
Test Protocols for Advanced Inverter Interoperability Functions – Main Document
Energy Technology Data Exchange (ETDEWEB)
Johnson, Jay Dean [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gonzalez, Sigifredo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ralph, Mark E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ellis, Abraham [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Broderick, Robert Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2013-11-01
Distributed energy resources (DER) such as photovoltaic (PV) systems, when deployed in a large scale, are capable of influencing significantly the operation of power systems. Looking to the future, stakeholders are working on standards to make it possible to manage the potentially complex interactions between DER and the power system. In 2009, the Electric Power Research Institute (EPRI), Sandia National Laboratories (SNL) with the U.S. Department of Energy (DOE), and the Solar Electric Power Association (SEPA) initiated a large industry collaborative to identify and standardize definitions for a set of DER grid support functions. While the initial effort concentrated on grid-tied PV inverters and energy storage systems, the concepts have applicability to all DER. A partial product of this on-going effort is a reference definitions document (IEC TR 61850-90-7, Object models for power converters in distributed energy resources (DER) systems) that has become a basis for expansion of related International Electrotechnical Commission (IEC) standards, and is supported by US National Institute of Standards and Technology (NIST) Smart Grid Interoperability Panel (SGIP). Some industry-led organizations advancing communications protocols have also embraced this work. As standards continue to evolve, it is necessary to develop test protocols to independently verify that the inverters are properly executing the advanced functions. Interoperability is assured by establishing common definitions for the functions and a method to test compliance with operational requirements. This document describes test protocols developed by SNL to evaluate the electrical performance and operational capabilities of PV inverters and energy storage, as described in IEC TR 61850-90-7. While many of these functions are not currently required by existing grid codes or may not be widely available commercially, the industry is rapidly moving in that direction. Interoperability issues are already
-
Recent developments in the cement industry: a comparative study between Mexico and India
Directory of Open Access Journals (Sweden)
Ganesh Babu Kumaran
2008-10-01
Full Text Available Since early twentieth century, the use of cement has become a popular and strategic product for economic growth of every country. In India as in Mexico, the first factories began in the earlier twentieth century, India is nowadays the world’s second largest producer and Mexico is the third firm in cement production, despite being the tenth world producer. The eighties have significate for both countries major structural changes in its economy, which have radically altered the structure and functioning of the cement industry and even more during the decade of the nineties. This article discusses the recent performance of the cement industry in both countries, compares the dynamics and causes that gave rise to these changes. It examines changes in the structure of domestic market in both countries and the strategies employed by large companies that operate in both, including a brief analysis of the role of transnational corporations in their development at the stage of globalization and liberalization of markets that characterizes the last two decades. Finally, it explores the great changes that make possible the growth and expansion of the cement industry during the period, based on technological change, the determinants of competitiveness and the role of economic policies in the development of industry in both countries.
-
Directory of Open Access Journals (Sweden)
Aamir Shahzad
2016-06-01
Full Text Available Substantial changes have occurred in the Information Technology (IT sectors and with these changes, the demand for remote access to field sensor information has increased. This allows visualization, monitoring, and control through various electronic devices, such as laptops, tablets, i-Pads, PCs, and cellular phones. The smart phone is considered as a more reliable, faster and efficient device to access and monitor industrial systems and their corresponding information interfaces anywhere and anytime. This study describes the deployment of a protocol whereby industrial system information can be securely accessed by cellular phones via a Supervisory Control And Data Acquisition (SCADA server. To achieve the study goals, proprietary protocol interconnectivity with non-proprietary protocols and the usage of interconnectivity services are considered in detail. They support the visualization of the SCADA system information, and the related operations through smart phones. The intelligent sensors are configured and designated to process real information via cellular phones by employing information exchange services between the proprietary protocol and non-proprietary protocols. SCADA cellular access raises the issue of security flaws. For these challenges, a cryptography-based security method is considered and deployed, and it could be considered as a part of a proprietary protocol. Subsequently, transmission flows from the smart phones through a cellular network.
-
Shahzad, Aamir; Landry, René; Lee, Malrey; Xiong, Naixue; Lee, Jongho; Lee, Changhoon
2016-06-14
Substantial changes have occurred in the Information Technology (IT) sectors and with these changes, the demand for remote access to field sensor information has increased. This allows visualization, monitoring, and control through various electronic devices, such as laptops, tablets, i-Pads, PCs, and cellular phones. The smart phone is considered as a more reliable, faster and efficient device to access and monitor industrial systems and their corresponding information interfaces anywhere and anytime. This study describes the deployment of a protocol whereby industrial system information can be securely accessed by cellular phones via a Supervisory Control And Data Acquisition (SCADA) server. To achieve the study goals, proprietary protocol interconnectivity with non-proprietary protocols and the usage of interconnectivity services are considered in detail. They support the visualization of the SCADA system information, and the related operations through smart phones. The intelligent sensors are configured and designated to process real information via cellular phones by employing information exchange services between the proprietary protocol and non-proprietary protocols. SCADA cellular access raises the issue of security flaws. For these challenges, a cryptography-based security method is considered and deployed, and it could be considered as a part of a proprietary protocol. Subsequently, transmission flows from the smart phones through a cellular network.
-
Shahzad, Aamir; Landry, René; Lee, Malrey; Xiong, Naixue; Lee, Jongho; Lee, Changhoon
2016-01-01
Substantial changes have occurred in the Information Technology (IT) sectors and with these changes, the demand for remote access to field sensor information has increased. This allows visualization, monitoring, and control through various electronic devices, such as laptops, tablets, i-Pads, PCs, and cellular phones. The smart phone is considered as a more reliable, faster and efficient device to access and monitor industrial systems and their corresponding information interfaces anywhere and anytime. This study describes the deployment of a protocol whereby industrial system information can be securely accessed by cellular phones via a Supervisory Control And Data Acquisition (SCADA) server. To achieve the study goals, proprietary protocol interconnectivity with non-proprietary protocols and the usage of interconnectivity services are considered in detail. They support the visualization of the SCADA system information, and the related operations through smart phones. The intelligent sensors are configured and designated to process real information via cellular phones by employing information exchange services between the proprietary protocol and non-proprietary protocols. SCADA cellular access raises the issue of security flaws. For these challenges, a cryptography-based security method is considered and deployed, and it could be considered as a part of a proprietary protocol. Subsequently, transmission flows from the smart phones through a cellular network. PMID:27314351
-
International protocol on volatile organic compounds
International Nuclear Information System (INIS)
Gauthier, J.-P.
1992-01-01
In August 1991, negotiations between Canada, the USA, and 33 European countries led to an international protocol on reducing the emissions of volatile organic compounds (VOC), which are responsible for serious ozone pollution problems. This was the third transborder pollution agreement developed under the auspices of the United Nations Economic Commission for Europe. Certain aspects of negotiations related to an earlier protocol developed for SO 2 and nitrogen oxide emissions had reappeared during the VOC negotiations, and these aspects are discussed. The VOC protocol proposes three approaches to satisfy basic obligations: reducing VOC emissions of a country by 30%, reducing VOC emissions by 30% in certain regions, and ensuring a freeze in VOC emissions in a country starting on a specified date. The protocol also introduces a new concept, that of zones of tropospheric ozone management. In Canada, plans for management of nitrogen oxides and VOC have been adapted to the ozone problem, and the management plan has been developed by a consultation process involving all sectors of society including industry, environmental groups, and governments. In Canada, it will be sufficient to reduce total VOC emissions by 16% during a first phase and to increase these reductions slightly in the second phase. Special ozone management zones in the Quebec City/Windsor corridor and the Fraser River valley have been established
-
Vorotnikov, A. A.; Klimov, D. D.; Romash, E. V.; Bashevskaya, O. S.; Poduraev, Yu. V.; Bazykyan, E. A.; Chunihin, A. A.
2018-03-01
Industrial robots perform technological operations, such as spot and arc welding, machining and laser cutting along different trajectories within their performance characteristics. The evaluation of these characteristics is carried out according to the criteria of the standard ISO 9283. The criteria of this standard are applicable in industrial manufacturing, but not in the medical industry, as they are not developed in the framework of medical tasks. Therefore, it is necessary to evaluate according to criteria built on different principles. In this article, the question of comparative evaluation of trajectories from program movements of a robot and manual movements of a surgeon, arising during the development of robotic medical complexes using industrial robots, is considered. A comparative evaluation is required to prove the expediency of automating medical operations in maxillofacial surgery. This study focuses on the estimation of velocity accuracy of a medical instrument. To obtain the velocity of the medical instrument, coordinates of the trajectory points from the program movements of the robot KUKA LWR4+ and trajectories from the manual movements of a professional surgeon have been measured. The measurement was carried out using a coordinate measuring machine, the laser tracker Leica LTD800. The accuracy estimation was carried out by two criteria: the criterion set out in the ISO 9283 standard, and the developed alternative criterion, the description of which is presented in this article. A quantitative comparative evaluation of the trajectories of a robot and a surgeon was obtained.
-
An entanglement concentration protocol for cluster states using ...
Indian Academy of Sciences (India)
Permanent link: http://www.ias.ac.in/article/fulltext/pram/086/05/0973-0983 ... The purpose of this paper is a proposal on entanglement concentration protocol forcluster states. The protocol ... We also make a comparative numerical study of the residual entanglement left out after the execution of each step of the protocol.
-
Maximally efficient protocols for direct secure quantum communication
Energy Technology Data Exchange (ETDEWEB)
Banerjee, Anindita [Department of Physics and Materials Science Engineering, Jaypee Institute of Information Technology, A-10, Sector-62, Noida, UP-201307 (India); Department of Physics and Center for Astroparticle Physics and Space Science, Bose Institute, Block EN, Sector V, Kolkata 700091 (India); Pathak, Anirban, E-mail: anirban.pathak@jiit.ac.in [Department of Physics and Materials Science Engineering, Jaypee Institute of Information Technology, A-10, Sector-62, Noida, UP-201307 (India); RCPTM, Joint Laboratory of Optics of Palacky University and Institute of Physics of Academy of Science of the Czech Republic, Faculty of Science, Palacky University, 17. Listopadu 12, 77146 Olomouc (Czech Republic)
2012-10-01
Two protocols for deterministic secure quantum communication (DSQC) using GHZ-like states have been proposed. It is shown that one of these protocols is maximally efficient and that can be modified to an equivalent protocol of quantum secure direct communication (QSDC). Security and efficiency of the proposed protocols are analyzed and compared. It is shown that dense coding is sufficient but not essential for DSQC and QSDC protocols. Maximally efficient QSDC protocols are shown to be more efficient than their DSQC counterparts. This additional efficiency arises at the cost of message transmission rate. -- Highlights: ► Two protocols for deterministic secure quantum communication (DSQC) are proposed. ► One of the above protocols is maximally efficient. ► It is modified to an equivalent protocol of quantum secure direct communication (QSDC). ► It is shown that dense coding is sufficient but not essential for DSQC and QSDC protocols. ► Efficient QSDC protocols are always more efficient than their DSQC counterparts.
-
Relative risk analysis of several manufactured nanomaterials: an insurance industry context.
Robichaud, Christine Ogilvie; Tanzil, Dicksen; Weilenmann, Ulrich; Wiesner, Mark R
2005-11-15
A relative risk assessment is presented for the industrial fabrication of several nanomaterials. The production processes for five nanomaterials were selected for this analysis, based on their current or near-term potential for large-scale production and commercialization: single-walled carbon nanotubes, bucky balls (C60), one variety of quantum dots, alumoxane nanoparticles, and nano-titanium dioxide. The assessment focused on the activities surrounding the fabrication of nanomaterials, exclusive of any impacts or risks with the nanomaterials themselves. A representative synthesis method was selected for each nanomaterial based on its potential for scaleup. A list of input materials, output materials, and waste streams for each step of fabrication was developed and entered into a database that included key process characteristics such as temperature and pressure. The physical-chemical properties and quantities of the inventoried materials were used to assess relative risk based on factors such as volatility, carcinogenicity, flammability, toxicity, and persistence. These factors were first used to qualitatively rank risk, then combined using an actuarial protocol developed by the insurance industry for the purpose of calculating insurance premiums for chemical manufacturers. This protocol ranks three categories of risk relative to a 100 point scale (where 100 represents maximum risk): incident risk, normal operations risk, and latent contamination risk. Results from this analysis determined that relative environmental risk from manufacturing each of these five materials was comparatively low in relation to other common industrial manufacturing processes.
-
International Nuclear Information System (INIS)
Weckbach, S.; Michaely, H.J.; Schoenberg, S.O.; Dinter, D.J.; Stemmer, A.
2010-01-01
To evaluate a whole body (WB) continuous-table-movement (CTM) MR protocol for the assessment of multiple myeloma (MM) in comparison to a step-by-step WB protocol. Eighteen patients with MM were examined at 1.5T using a WB CTM protocol (axial T2-w fs BLADE, T1-w GRE sequence) and a step-by-step WB protocol including coronal/sagittal T1-w SE and STIR sequences as reference. Protocol time was assessed. Image quality, artefacts, liver/spleen assessability, and the ability to depict bone marrow lesions less than or greater than 1 cm as well as diffuse infiltration and soft tissue lesions were rated. Potential changes in the Durie and Salmon Plus stage and the detectability of complications were assessed. Mean protocol time was 6:38 min (CTM) compared to 24:32 min (standard). Image quality was comparable. Artefacts were more prominent using the CTM protocol (P = 0.0039). Organ assessability was better using the CTM protocol (P < 0.001). Depiction of bone marrow and soft tissue lesions was identical without a staging shift. Vertebral fractures were not detected using the CTM protocol. The new protocol allows a higher patient throughput and facilitates the depiction of extramedullary lesions. However, as long as vertebral fractures are not detectable, the protocol cannot be safely used for clinical routine without the acquisition of an additional sagittal sequence. (orig.)
-
Ribeiro, R A; Lovato, M B
2007-03-29
Five published DNA extraction protocols were compared for their ability to produce good quality DNA from fresh and herbarium leaves of several species of the genus Dalbergia. The leaves of these species contain high amounts of secondary metabolites, which make it difficult to perform a clean DNA extraction and thereby interfering with subsequent PCR amplification. The protocol that produced the best DNA quality in most of the Dalbergia species analyzed, utilizes polyvinylpyrrolidone to bind the phenolic compounds, a high molar concentration of NaCl to inhibit co-precipitation of polysaccharides and DNA, and LiCl for removing RNA by selective precipitation. The DNA quality of herbarium specimens was worse than that for fresh leaves, due to collecting conditions and preservation of samples. We analyzed 54 herbarium specimens, but the recovered DNA allowed successful PCR amplification in only eight. For the genus Dalbergia, the herbarium is an important source of material for phylogenetic and evolutionary studies; due to the occurrence of the different species in various geographical regions in Brazil, it is difficult to obtain fresh material in nature. Our results demonstrated that for Dalbergia species the methods used for the collection and preservation of herbarium specimens have a mayor influence on DNA quality and in the success of phylogenetic studies of the species.
-
Development of high-reliable real-time communication network protocol for SMART
Energy Technology Data Exchange (ETDEWEB)
Song, Ki Sang; Kim, Young Sik [Korea National University of Education, Chongwon (Korea); No, Hee Chon [Korea Advanced Institute of Science and Technology, Taejon (Korea)
1999-04-01
In this research, we first define protocol subsets for SMART(System-integrated Modular Advanced Reactor) communication network based on the requirement of SMART MMIS transmission delay and traffic requirements and OSI(Open System Interconnection) 7 layers' network protocol functions. Also, current industrial purpose LAN protocols are analyzed and the applicability of commercialized protocols are checked. For the suitability test, we have applied approximated SMART data traffic and maximum allowable transmission delay requirement. With the simulation results, we conclude that IEEE 802.5 and FDDI which is an ANSI standard, is the most suitable for SMART. We further analyzed the FDDI and token ring protocols for SMART and nuclear plant network environment including IEEE 802.4, IEEE 802.5, and ARCnet. The most suitable protocol for SMART is FDDI and FDDI MAC and RMT protocol specifications have been verified with LOTOS and the verification results show that FDDI MAC and RMT satisfy the reachability and liveness, but does not show deadlock and livelock. Therefore, we conclude that FDDI MAC and RMT is highly reliable protocol for SMART MMIS network. After that, we consider the stacking fault of IEEE 802.5 token ring protocol and propose a fault tolerant MAM(Modified Active Monitor) protocol. The simulation results show that the MAM protocol improves lower priority traffic service rate when stacking fault occurs. Therefore, proposed MAM protocol can be applied to SMART communication network for high reliability and hard real-time communication purpose in data acquisition and inter channel network. (author). 37 refs., 79 figs., 39 tabs.
-
International Nuclear Information System (INIS)
Knoepfel, Ivo
1999-01-01
The implementation of the Kyoto Protocol in the context of the Framework Convention on Climate Change will probably lead to economic winners and losers in various sectors of the economy. Especially carbon intensive industries will need to develop hedging strategies to prevent potential negative effects and to optimise market opportunities. Such strategies can be based on technological innovation, market and product diversification, and on financial/legal offsets. The Kyoto Protocol has introduced new market-based instruments, which can, in a near future provide such hedging opportunities. These include joint implementation, the so-called clean development mechanism, and international emissions trading. The financial services and insurance sector are the natural partners of industry in designing tailored hedging strategies. It is recommended that industry, financial services and insurance companies take a more proactive role in further developing the market-based instruments established by the Kyoto Protocol. (Author)
-
Kapritsou, Maria; Papathanassoglou, Elizabeth D; Bozas, Evangelos; Korkolis, Dimitrios P; Konstantinou, Evangelos A; Kaklamanos, Ioannis; Giannakopoulou, Margarita
2017-03-01
Fast-track (FT) postoperative protocol in oncological patients after major abdominal surgery reduces complications and length of postoperative stay compared to the conventional (CON) protocol. However, stress and pain responses have not been compared between the two protocols. To compare stress, pain, and related neuropeptidic responses (adrenocorticotropic hormone [ACTH], cortisol, and neuropeptide Y [NPY]) between FT and CON protocols. A clinical trial with repeated measurements was conducted (May 2012 to May 2014) with a sample of 63 hepatectomized or pancreatectomized patients randomized into two groups: FT ( n = 29) or CON ( n = 34). Demographic and clinical data were collected, and pain (Visual Analog Scale [VAS] and Behavioral Pain Scale [BPS]) and stress responses (3 self-report questions) assessed. NPY, ACTH, and cortisol plasma levels were measured at T1 = day of admission, T2 = day of surgery, and T3 = prior to discharge. ACTH T1 and ACTH T2 levels were positively correlated with self-reported stress levels (ρ = .43 and ρ = .45, respectively, p .05). Neuropeptidic levels were higher in the FT group. Future research should evaluate this association further, as these biomarkers might serve as objective indicators of postoperative pain and stress.
-
Game-theoretic perspective of Ping-Pong protocol
Kaur, Hargeet; Kumar, Atul
2018-01-01
We analyse Ping-Pong protocol from the point of view of a game. The analysis helps us in understanding the different strategies of a sender and an eavesdropper to gain the maximum payoff in the game. The study presented here characterizes strategies that lead to different Nash equilibriums. We further demonstrate the condition for Pareto optimality depending on the parameters used in the game. Moreover, we also analysed LM05 protocol and compared it with PP protocol from the point of view of a generic two-way QKD game with or without entanglement. Our results provide a deeper understanding of general two-way QKD protocols in terms of the security and payoffs of different stakeholders in the protocol.
-
Biometrics based authentication scheme for session initiation protocol.
Xie, Qi; Tang, Zhixiong
2016-01-01
Many two-factor challenge-response based session initiation protocol (SIP) has been proposed, but most of them are vulnerable to smart card stolen attacks and password guessing attacks. In this paper, we propose a novel three-factor SIP authentication scheme using biometrics, password and smart card, and utilize the pi calculus-based formal verification tool ProVerif to prove that the proposed protocol achieves security and authentication. Furthermore, our protocol is highly efficient when compared to other related protocols.
-
A Simple XML Producer-Consumer Protocol
Smith, Warren; Gunter, Dan; Quesnel, Darcy; Biegel, Bryan (Technical Monitor)
2001-01-01
There are many different projects from government, academia, and industry that provide services for delivering events in distributed environments. The problem with these event services is that they are not general enough to support all uses and they speak different protocols so that they cannot interoperate. We require such interoperability when we, for example, wish to analyze the performance of an application in a distributed environment. Such an analysis might require performance information from the application, computer systems, networks, and scientific instruments. In this work we propose and evaluate a standard XML-based protocol for the transmission of events in distributed systems. One recent trend in government and academic research is the development and deployment of computational grids. Computational grids are large-scale distributed systems that typically consist of high-performance compute, storage, and networking resources. Examples of such computational grids are the DOE Science Grid, the NASA Information Power Grid (IPG), and the NSF Partnerships for Advanced Computing Infrastructure (PACIs). The major effort to deploy these grids is in the area of developing the software services to allow users to execute applications on these large and diverse sets of resources. These services include security, execution of remote applications, managing remote data, access to information about resources and services, and so on. There are several toolkits for providing these services such as Globus, Legion, and Condor. As part of these efforts to develop computational grids, the Global Grid Forum is working to standardize the protocols and APIs used by various grid services. This standardization will allow interoperability between the client and server software of the toolkits that are providing the grid services. The goal of the Performance Working Group of the Grid Forum is to standardize protocols and representations related to the storage and distribution of
-
Johann Peter Murmann; Ernst Homburg
2001-01-01
Current models of industry evolution suggest that development patterns should be the same across different levels of analysis. In comparing the evolution of the synthetic dye industry at the global level and in the five major producer countries before World War I (Britain, Germany, France, Switzerland and the United States), it is shown that patterns of industry evolution differed significantly across national contexts. Based on a quantitative and qualitative database of all firms and plants ...
-
Comparing Short Dental Implants to Standard Dental Implants: Protocol for a Systematic Review.
Rokn, Amir Reza; Keshtkar, Abbasali; Monzavi, Abbas; Hashemi, Kazem; Bitaraf, Tahereh
2018-01-18
Short dental implants have been proposed as a simpler, cheaper, and faster alternative for the rehabilitation of atrophic edentulous areas to avoid the disadvantages of surgical techniques for increasing bone volume. This review will compare short implants (4 to 8 mm) to standard implants (larger than 8 mm) in edentulous jaws, evaluating on the basis of marginal bone loss (MBL), survival rate, complications, and prosthesis failure. We will electronically search for randomized controlled trials comparing short dental implants to standard dental implants in the following databases: PubMed, Web of Science, EMBASE, Scopus, the Cochrane Central Register of Controlled Trials, and ClinicalTrials.gov with English language restrictions. We will manually search the reference lists of relevant reviews and the included articles in this review. The following journals will also be searched: European Journal of Oral Implantology, Clinical Oral Implants Research, and Clinical Implant Dentistry and Related Research. Two reviewers will independently perform the study selection, data extraction and quality assessment (using the Cochrane Collaboration tool) of included studies. All meta-analysis procedures including appropriate effect size combination, sub-group analysis, meta-regression, assessing publication or reporting bias will be performed using Stata (Statacorp, TEXAS) version 12.1. Short implant effectiveness will be assessed using the mean difference of MBL in terms of weighted mean difference (WMD) and standardized mean difference (SMD) using Cohen's method. The combined effect size measures in addition to the related 95% confidence intervals will be estimated by a fixed effect model. The heterogeneity of the related effect size will be assessed using a Q Cochrane test and I2 measure. The MBL will be presented by a standardized mean difference with a 95% confidence interval. The survival rate of implants, prostheses failures, and complications will be reported using a risk
-
Backup key generation model for one-time password security protocol
Jeyanthi, N.; Kundu, Sourav
2017-11-01
The use of one-time password (OTP) has ushered new life into the existing authentication protocols used by the software industry. It introduced a second layer of security to the traditional username-password authentication, thus coining the term, two-factor authentication. One of the drawbacks of this protocol is the unreliability of the hardware token at the time of authentication. This paper proposes a simple backup key model that can be associated with the real world applications’user database, which would allow a user to circumvent the second authentication stage, in the event of unavailability of the hardware token.
-
Energy Technology Data Exchange (ETDEWEB)
Batters, S.; Benovich, I.; Gerchikov, M. [AMEC NSS Ltd., Toronto, ON (Canada)
2011-07-01
Management of radioactive waste in nuclear industries in Canada is tightly regulated. The regulated nuclear industries include nuclear power generation, uranium mining and milling, nuclear medicine, radiation research and education and industrial users of nuclear material (e.g. radiography, thickness gauges, etc). In contrast, management of Naturally Occurring Radioactive Material (NORM) waste is not regulated by the Canadian Nuclear Safety Commission (CNSC), with the exception of transport above specified concentrations. Although these are radioactive materials that have always been present in various concentrations in the environment and in the tissues of every living animal, including humans, the hazards of similar quantities of NORM radionuclides are identical to those of the same or other radionuclides from regulated industries. The concentration of NORM in most natural substances is so low that the associated risk is generally regarded as negligible, however higher concentrations may arise as the result of industrial operations such as: oil and gas production, mineral extraction and processing (e.g. phosphate fertilizer production), metal recycling, thermal electric power generation, water treatment facilities. Health Canada has published the Canadian Guidelines for the Management of Naturally Occurring Radioactive Materials (NORM). This paper presents a comparative analysis of the requirements for management of radioactive waste in the regulated nuclear industries and of the guidelines for management of NORM waste. (author)
-
International Nuclear Information System (INIS)
Batters, S.; Benovich, I.; Gerchikov, M.
2011-01-01
Management of radioactive waste in nuclear industries in Canada is tightly regulated. The regulated nuclear industries include nuclear power generation, uranium mining and milling, nuclear medicine, radiation research and education and industrial users of nuclear material (e.g. radiography, thickness gauges, etc). In contrast, management of Naturally Occurring Radioactive Material (NORM) waste is not regulated by the Canadian Nuclear Safety Commission (CNSC), with the exception of transport above specified concentrations. Although these are radioactive materials that have always been present in various concentrations in the environment and in the tissues of every living animal, including humans, the hazards of similar quantities of NORM radionuclides are identical to those of the same or other radionuclides from regulated industries. The concentration of NORM in most natural substances is so low that the associated risk is generally regarded as negligible, however higher concentrations may arise as the result of industrial operations such as: oil and gas production, mineral extraction and processing (e.g. phosphate fertilizer production), metal recycling, thermal electric power generation, water treatment facilities. Health Canada has published the Canadian Guidelines for the Management of Naturally Occurring Radioactive Materials (NORM). This paper presents a comparative analysis of the requirements for management of radioactive waste in the regulated nuclear industries and of the guidelines for management of NORM waste. (author)
-
HIGH-VELOCITY RESISTANCE EXERCISE PROTOCOLS IN OLDER WOMEN: EFFECTS ON CARDIOVASCULAR RESPONSE
Directory of Open Access Journals (Sweden)
Rodrigo P. da Silva
2007-12-01
Full Text Available Acute cardiovascular responses to different high-velocity resistance exercise protocols were compared in untrained older women. Twelve apparently healthy volunteers (62.6 ± 2.9 y performed three different protocols in the bench press (BP. All protocols involved three sets of 10 repetitions performed with a 10RM load and 2 minutes of rest between sets. The continuous protocol (CP involved ten repetitions with no pause between repetitions. The discontinuous protocols were performed with a pause of five (DP5 or 15 (DP15 seconds between the fifth and sixth repetitions. Heart rate (HR, systolic blood pressure (SBP, rate pressure product (RPP, Rating of Perceived Exertion (RPE, and blood lactate (BLa were assessed at baseline and at the end of all exercise sets. Factorial ANOVA was used to compare the cardiovascular response among different protocols. Compared to baseline, HR and RPP were significantly (p < 0.05 higher after the third set in all protocols. HR and RPP were significantly (p < 0.05 lower in DP5 and DP15 compared with CP for the BP exercise. Compared to baseline, RPE increased significantly (p < 0.05 with each subsequent set in all protocols. Blood lactate concentration during DP5 and DP15 was significantly lower than CP. It appears that discontinuous high-velocity resistance exercise has a lower cardiovascular demand than continuous resistance exercise in older women
-
On shaky ground - A study of security vulnerabilities in control protocols
Energy Technology Data Exchange (ETDEWEB)
Byres, E. J. [Wurldtech Research Inc., 7178 Lancrest Tr., Lantzville, BC V0R 2H0 (Canada); Huffman, D. [Wurldtech Analytics Inc., 208-1040 Hamilton St., Vancouver, BC V6B 2R9 (Canada); Kube, N. [Univ. of Victoria, Dept. of Computer Science, PO Box 3055 STN CSC, Victoria BC V8W 3P6 (Canada)
2006-07-01
The recent introduction of information technologies such as Ethernet R into nuclear industry control devices has resulted in significantly less isolation from the outside world. This raises the question of whether these systems could be attacked by malware, network hackers or professional criminals to cause disruption to critical operations in a manner similar to the impacts now felt in the business world. To help answer this question, a study was undertaken to test a representative control protocol to determine if it had vulnerabilities that could be exploited. A framework was created in which a test could express a large number of test cases in very compact formal language. This in turn, allowed for the economical automation of both the generation of selectively malformed protocol traffic and the measurement of device under test's (DUT) behavior in response to this traffic. Approximately 5000 protocol conformance tests were run against two major brands of industrial controller. More than 60 categories of errors were discovered, the majority of which were in the form of incorrect error responses to malformed traffic. Several malformed packets however, caused the device to respond or communicate in inappropriate ways. These would be relatively simple for an attacker to inject into a system and could result in the plant operator losing complete view or control of the control device. Based on this relatively small set of devices, we believe that the nuclear industry urgently needs to adopt better security robustness testing of control devices as standard practice. (authors)
-
On shaky ground - A study of security vulnerabilities in control protocols
International Nuclear Information System (INIS)
Byres, E. J.; Huffman, D.; Kube, N.
2006-01-01
The recent introduction of information technologies such as Ethernet R into nuclear industry control devices has resulted in significantly less isolation from the outside world. This raises the question of whether these systems could be attacked by malware, network hackers or professional criminals to cause disruption to critical operations in a manner similar to the impacts now felt in the business world. To help answer this question, a study was undertaken to test a representative control protocol to determine if it had vulnerabilities that could be exploited. A framework was created in which a test could express a large number of test cases in very compact formal language. This in turn, allowed for the economical automation of both the generation of selectively malformed protocol traffic and the measurement of device under test's (DUT) behavior in response to this traffic. Approximately 5000 protocol conformance tests were run against two major brands of industrial controller. More than 60 categories of errors were discovered, the majority of which were in the form of incorrect error responses to malformed traffic. Several malformed packets however, caused the device to respond or communicate in inappropriate ways. These would be relatively simple for an attacker to inject into a system and could result in the plant operator losing complete view or control of the control device. Based on this relatively small set of devices, we believe that the nuclear industry urgently needs to adopt better security robustness testing of control devices as standard practice. (authors)
-
Estrada Vaquero, Isabel; Faems, Dries; Martin-Cruz, Natalia; Perez-Santana, M Pilar
2016-01-01
Based on a comparative study of two alliances, this paper provides an in-depth examination of the role of interpartner dissimilarities in Industry-University (IU) alliances. We make a conceptual distinction between routine-based dissimilarities (differences in partners' behavior) and
-
The Protocol of Choice for Treatment of Snake Bite
Directory of Open Access Journals (Sweden)
Afshin Mohammad Alizadeh
2016-01-01
Full Text Available The aim of the current study is to compare three different methods of treatment of snake bite to determine the most efficient one. To unify the protocol of snake bite treatment in our center, we retrospectively reviewed files of the snake-bitten patients who had been referred to us between 2010 and 2014. They were contacted for follow-up using phone calls. Demographic and on-arrival characteristics, protocol used for treatment (WHO/Haddad/GF, and outcome/complications were evaluated. Patients were entered into one of the protocol groups and compared. Of a total of 63 patients, 56 (89% were males. Five, 19, and 28 patients were managed by Haddad, WHO, or GF protocols, respectively. Eleven patients had fallen into both GF and WHO protocols and were excluded. Serum sickness was significantly more common when WHO protocol was used while 100% of the compartment syndromes and 71% of deformities had been reported after GF protocol. The most important complications were considered to be deformity, compartment syndrome, and amputation and were more frequent after the use of WHO and GF protocols (23.1% versus 76.9%; none in Haddad; P = NS. Haddad protocol seems to be the best for treatment of snake-bitten patients in our region. However, this cannot be strictly concluded because of the limited sample size and nonsignificant P values.
-
Directory of Open Access Journals (Sweden)
Andrić Zoran
2012-01-01
Full Text Available Introduction. Still there is no consensus on the choice of the most efficient and the least toxic chemotherapy regimen in the treatment of advanced gastric cancer. Nowadays few therapy protocols are available for treating this disease. Objective. Study was conducted to compare the efficacy and toxicity of FAM (flurouracil, doxorubicin, mitomycin C with CDDP and FU/FA (cisplatin, 5-fluorouracil, leucovorin protocols in patients with locally advanced and metastatic gastric cancer. Methods. This randomized study involved a group of 50 patients with locally advanced or metastatic gastric cancer, who had not previously undergone chemotherapy treatment. Progression free survival, overall survival and drug toxicity were evaluated. For statistical analysis chi-square test, Kaplan-Meier curve and the log rank test were used. Results. The overall response rate was 20% in the group treated with FAM and 24% in the group treated with CDDP, FU/FA (4% of patients from each group had complete response, but without significant statistical difference. Median survival was 10.9 months in the FAM group and 11.8 months in CDDP, FU/FA group, with no statistically significant difference. Non-haematological and haematological toxicities of CDDP, FU/FA were considerably less frequent than of FAM, and there was no treatment related deaths in any of the groups. Conclusion. Both investigated regimens demonstrated moderate efficacy. The study shows in favour of justified application of both protocols, while in regard to toxicity CDDP and FU/FA can be recommended as preferable treatment for locally advanced and metastatic gastric cancer. New strategies should be considered for better efficacy in the treatment of advanced gastric cancer. New strategies are necessary with the goal to achieve a better therapeutic effect.
-
Tracking occupational hearing loss across global industries: a comparative analysis of metrics.
Rabinowitz, Peter M; Galusha, Deron; McTague, Michael F; Slade, Martin D; Wesdock, James C; Dixon-Ernst, Christine
2012-01-01
Occupational hearing loss is one of the most prevalent occupational conditions; yet, there is no acknowledged international metric to allow comparisons of risk between different industries and regions. In order to make recommendations for an international standard of occupational hearing loss, members of an international industry group (the International Aluminium Association) submitted details of different hearing loss metrics currently in use by members. We compared the performance of these metrics using an audiometric data set for over 6000 individuals working in 10 locations of one member company. We calculated rates for each metric at each location from 2002 to 2006. For comparison, we calculated the difference of observed-expected (for age) binaural high-frequency hearing loss (in dB/year) for each location over the same time period. We performed linear regression to determine the correlation between each metric and the observed-expected rate of hearing loss. The different metrics produced discrepant results, with annual rates ranging from 0.0% for a less-sensitive metric to more than 10% for a highly sensitive metric. At least two metrics, a 10dB age-corrected threshold shift from baseline and a 15dB nonage-corrected shift metric, correlated well with the difference of observed-expected high-frequency hearing loss. This study suggests that it is feasible to develop an international standard for tracking occupational hearing loss in industrial working populations.
-
International Nuclear Information System (INIS)
Soares, M. R.; Maia, A. F.; Batista, W. O. G.; Lara, P. A.
2014-08-01
To visualization a complete dental radiology dental lives together with two separate proposals: [1] protocols diameter encompassing the entire arch (single) or [2] protocol with multiple fields of view (Fov) which together encompass the entire arch (stitched Fov s). The objective of this study is to evaluate effective dose values in examination protocols for all dental arcade available in different outfits with these two options. For this, a female anthropomorphic phantom manufactured by Radiology Support Devices twenty six thermoluminescent dosimeters inserted in relevant bodies and positions was used. Irradiate the simulator in the clinical conditions. The protocols were averaged and compared: [a] 14.0 cm x 8.5 cm and [b] 8.5 cm x 8.5 cm (Gendex Tomography GXCB 500), [c] protocol stitched for jaw combination of three volumes of 5.0 cm x 3.7 cm (Kodak 9000 3D scanner) [d] protocol stitched Fov s 5.0 cm x 8.0 cm (Planmeca Pro Max 3D) and [e] single technical Fov 14 cm x 8 cm (i-CAT Classical). Our results for the effective dose were: a range between 43.1 and 111.1 micro Sv for technical single Fov and 44.5 and 236.2 for technical stitched Fov s. The protocol presented the highest estimated effective dose was [d] and showed that lowest index was registered [a]. These results demonstrate that the protocol stitched Fov generated in Kodak 9000 3D machine applied the upper dental arch has practically equal value effective dose obtained by protocol extended diameter of, [a], which evaluates in a single image upper and lower arcade. It also demonstrates that the protocol [d] gives an estimate of five times higher than the protocol [a]. Thus, we conclude that in practical terms the protocol [c] stitched Fov s, not presents dosimetric advantages over other protocols. (Author)
-
Energy Technology Data Exchange (ETDEWEB)
Soares, M. R.; Maia, A. F. [Universidade Federal de Sergipe, Departamento de Fisica, Cidade Universitaria Prof. Jose Aloisio de Campos, Marechal Rondon s/n, Jardim Rosa Elze, 49-100000 Sao Cristovao, Sergipe (Brazil); Batista, W. O. G. [Instituto Federal da Bahia, Rua Emidio dos Santos s/n, Barbalho, Salvador, 40301015 Bahia (Brazil); Lara, P. A., E-mail: wilsonottobatista@gmail.com [Instituto de Pesquisas Energeticas e Nucleares / CNEN, Av. Lineu Prestes 2242, Cidade Universitaria, 05508-000 Sao Paulo (Brazil)
2014-08-15
To visualization a complete dental radiology dental lives together with two separate proposals: [1] protocols diameter encompassing the entire arch (single) or [2] protocol with multiple fields of view (Fov) which together encompass the entire arch (stitched Fov s). The objective of this study is to evaluate effective dose values in examination protocols for all dental arcade available in different outfits with these two options. For this, a female anthropomorphic phantom manufactured by Radiology Support Devices twenty six thermoluminescent dosimeters inserted in relevant bodies and positions was used. Irradiate the simulator in the clinical conditions. The protocols were averaged and compared: [a] 14.0 cm x 8.5 cm and [b] 8.5 cm x 8.5 cm (Gendex Tomography GXCB 500), [c] protocol stitched for jaw combination of three volumes of 5.0 cm x 3.7 cm (Kodak 9000 3D scanner) [d] protocol stitched Fov s 5.0 cm x 8.0 cm (Planmeca Pro Max 3D) and [e] single technical Fov 14 cm x 8 cm (i-CAT Classical). Our results for the effective dose were: a range between 43.1 and 111.1 micro Sv for technical single Fov and 44.5 and 236.2 for technical stitched Fov s. The protocol presented the highest estimated effective dose was [d] and showed that lowest index was registered [a]. These results demonstrate that the protocol stitched Fov generated in Kodak 9000 3D machine applied the upper dental arch has practically equal value effective dose obtained by protocol extended diameter of, [a], which evaluates in a single image upper and lower arcade. It also demonstrates that the protocol [d] gives an estimate of five times higher than the protocol [a]. Thus, we conclude that in practical terms the protocol [c] stitched Fov s, not presents dosimetric advantages over other protocols. (Author)
-
International Nuclear Information System (INIS)
Hinman, G.W.; Lowinger, T.C.
1987-01-01
Both Japan and the United States have undertaken major programs to utilize nuclear power for central station electricity generation. Over the past 20 years, the Japanese have developed their own construction and government regulatory institutions and now have an essentially independent domestic nuclear power program. Nuclear construction and government oversight of nuclear power have developed somewhat differently in Japan and the United States, reflecting to some extent the two countries' different business and social cultures. In the United States the vendor and utility industries are much more fragmented than those in Japan, and construction projects are carried out on a more competitive basis. The Japanese industry operates through a few well-established consortia while the U.S. industry does not. Relations among the national government, the vendors, and the electric utilities tend to be cooperative in Japan while they are more adversarial in the Untied States. This paper discusses these topics in a framework of a comparative study of the countries' nuclear industries. Whether because of the factors mentioned above or for other reasons the success of nuclear power in Japan and the United States has differed dramatically in recent years. This paper compares the performance of the nuclear enterprise in these two countries in terms of the physical attributes of the plants themselves, the labor required to build them, and the construction times required. It also discusses the relationship between initial estimates of costs and schedules and actual results achieved. On all counts, recent Japanese performance has been better than in the United States
-
Optical code-division multiple-access protocol with selective retransmission
Mohamed, Mohamed A. A.; Shalaby, Hossam M. H.; El-Badawy, El-Sayed A.
2006-05-01
An optical code-division multiple-access (OCDMA) protocol based on selective retransmission technique is proposed. The protocol is modeled using a detailed state diagram and is analyzed using equilibrium point analysis (EPA). Both traditional throughput and average delay are used to examine its performance for several network parameters. In addition, the performance of the proposed protocol is compared to that of the R3T protocol, which is based on a go-back-n technique. Our results show that a higher performance is achieved by the proposed protocol at the expense of system complexity.
-
DEFF Research Database (Denmark)
Löfström, Charlotta; Hansen, F.; Mansdal, S.
2011-01-01
samples using a real-time PCR method. The protocol included incubation in buffered peptone water, centrifugation of an aliquot and a boiling procedure. The validation study included comparative and collaborative trials recommended by the Nordic Organization for Validation of Alternative Methods (NordVal......). The comparative trial was performed against a culture based reference method (NMKL187, 2007) and a previously NordVal approved PCR method with a semi-automated magnetic bead-based DNA extraction step using 122 artificially contaminated samples. The limit of detection (LOD50) was found to be 3.0, 3.2 and 3.4 CFU...
-
A Comparative Study of Wireless Sensor Networks and Their Routing Protocols
Subhajit Pal; Debnath Bhattacharyya; Tai-hoon Kim
2010-01-01
Recent developments in the area of micro-sensor devices have accelerated advances in the sensor networks field leading to many new protocols specifically designed for wireless sensor networks (WSNs). Wireless sensor networks with hundreds to thousands of sensor nodes can gather information from an unattended location and transmit the gathered data to a particular user, depending on the application. These sensor nodes have some constraints due to their limited energy, storage capacity and comp...
-
Energy Technology Data Exchange (ETDEWEB)
Lim, Jae Kyu; Kang, Yoon Young [Korea Energy Economics Institute, Euiwang (Korea)
2000-12-01
The world community adopted the Kyoto Protocol in 1997 at the third Conference of the Parties to the United Nations Framework Convention on Climate Change(UNFCCC). The main achievement was agreement by developed(Annex I) countries to reduce or limit their greenhouse gas emissions. To assist parties in meeting their emission targets the Protocol sanctions the use of economic instruments such as the clean development mechanism(CDM), joint implementation(JI) and emissions trading(ET). However, there is still significant uncertainty surrounding the Kyoto Protocol for much of the details in the Protocol remains to be negotiated. The challenge now facing those negotiating the Kyoto Protocol is to remove the uncertainty and secure ratification of the Protocol. After the negotiation reaches an agreement in near future, the next main issue to be addressed is the way of involvement of developing countries in emission abatement commitments. The analysis presented in this report is based on the application of a global computable general equilibrium(CGE) model - GTEM-KOR. According to the analysis, compliance with Kyoto Protocol commitments, regardless of the emissions trading, is projected to impose economic costs on Annex I regions in the aggregate. Despite having no emission abatement commitments under the Kyoto Protocol, non-Annex I economies would be affected by emission abatement in Annex I regions undertaken as a result of entry into force of the Protocol. These effects would arise through trade and investment linkages between economies. Although the net impact for non-Annex I regions in aggregate is projected to be positive, there is a range of effects and the net impact for any one non-Annex I country will depend on its particular production and trade structure. As industrialized countries reduce their fossil fuel consumption to meet their emission reduction targets, their demand for fossil fuel imports from non-Annex I countries will decline, leading to lower fossil
-
International Nuclear Information System (INIS)
Yamamoto, Masayuki; Hashimoto, Naro
2002-02-01
Advisory Committee on Nuclear Fuel Cycle Backend Policy reported the basic approach to the RI and Institute etc. wastes on March 2002. According to it, radioactive waste form medical, industrial and research facilities should be classified by their radioactivity properties and physical and chemical properties, and should be disposed in the appropriate types of repository with that classification. For the radioactive waste containing comparatively high radioactivity generated from reactors, NSC has established the Concentration limit for disposal. NSC is now discussing about the limit for the radioactive waste from medical, industrial and research facilities containing comparatively high radioactivity. Japan Nuclear Cycle Development Institute (JNC) preliminary studied about the repository for radioactive waste from medical, industrial and research facilities and discussed about the problems for design on H12. This study was started to consider those problems, and to develop the conceptual design of the repository for radioactive waste from medical, industrial and research facilities. Safety assessment for that repository is also performed. The result of this study showed that radioactive waste from medical, industrial and research facilities of high activity should be disposed in the repository that has higher performance of barrier system comparing with the vault type near surface facility. If the conditions of the natural barrier and the engineering barrier are clearer, optimization of the design will be possible. (author)
-
A Lightweight Buyer-Seller Watermarking Protocol
Directory of Open Access Journals (Sweden)
Yongdong Wu
2008-01-01
Full Text Available The buyer-seller watermarking protocol enables a seller to successfully identify a traitor from a pirated copy, while preventing the seller from framing an innocent buyer. Based on finite field theory and the homomorphic property of public key cryptosystems such as RSA, several buyer-seller watermarking protocols (N. Memon and P. W. Wong (2001 and C.-L. Lei et al. (2004 have been proposed previously. However, those protocols require not only large computational power but also substantial network bandwidth. In this paper, we introduce a new buyer-seller protocol that overcomes those weaknesses by managing the watermarks. Compared with the earlier protocols, ours is n times faster in terms of computation, where n is the number of watermark elements, while incurring only O(1/lN times communication overhead given the finite field parameter lN. In addition, the quality of the watermarked image generated with our method is better, using the same watermark strength.
-
César Camisón
2004-01-01
The author's aim is to construct and validate empirically a theoretical model that allows performance and competitiveness in firms located in industrial districts to be explained. From the strategic perspective adopted, economic revenues are explained by three types of advantage: shared advantages, competitive advantages, and comparative advantages. Neither integration in the district, nor its attraction due to the shared competences within it, are significant predictors of performance. Empir...
-
Modelling a New Product Model on the Basis of an Existing STEP Application Protocol
Directory of Open Access Journals (Sweden)
B.-R. Hoehn
2005-01-01
Full Text Available During the last years a great range of computer aided tools has been generated to support the development process of various products. The goal of a continuous data flow, needed for high efficiency, requires powerful standards for the data exchange. At the FZG (Gear Research Centre of the Technical University of Munich there was a need for a common gear data format for data exchange between gear calculation programs. The STEP standard ISO 10303 was developed for this type of purpose, but a suitable definition of gear data was still missing, even in the Application Protocol AP 214, developed for the design process in the automotive industry. The creation of a new STEP Application Protocol or the extension of existing protocol would be a very time consumpting normative process. So a new method was introduced by FZG. Some very general definitions of an Application Protocol (here AP 214 were used to determine rules for an exact specification of the required kind of data. In this case a product model for gear units was defined based on elements of the AP 214. Therefore no change of the Application Protocol is necessary. Meanwhile the product model for gear units has been published as a VDMA paper and successfully introduced for data exchange within the German gear industry associated with FVA (German Research Organisation for Gears and Transmissions. This method can also be adopted for other applications not yet sufficiently defined by STEP.
-
Quantum multi-signature protocol based on teleportation
International Nuclear Information System (INIS)
Wen Xiao-jun; Liu Yun; Sun Yu
2007-01-01
In this paper, a protocol which can be used in multi-user quantum signature is proposed. The scheme of signature and verification is based on the correlation of Greenberger-Horne-Zeilinger (GHZ) states and the controlled quantum teleportation. Different from the digital signatures, which are based on computational complexity, the proposed protocol has perfect security in the noiseless quantum channels. Compared to previous quantum signature schemes, this protocol can verify the signature independent of an arbitrator as well as realize multi-user signature together. (orig.)
-
Protocol Monitoring Energy Conservation; Protocol Monitoring Energiebesparing
Energy Technology Data Exchange (ETDEWEB)
Boonekamp, P.G.M. [ECN Beleidsstudies, Petten (Netherlands); Mannaerts, H. [Centraal Planburea CPB, Den Haag (Netherlands); Tinbergen, W. [Centraal Bureau voor de Statistiek CBS, Den Haag (Netherlands); Vreuls, H.H.J. [Nederlandse onderneming voor energie en milieu Novem, Utrecht (Netherlands); Wesselink, B. [Rijksinstituut voor Volksgezondheid en Milieuhygiene RIVM, Bilthoven (Netherlands)
2001-12-01
On request of the Dutch ministry of Economic Affairs five institutes have collaborated to create a 'Protocol Monitoring Energy Conservation', a common method and database to calculate the amount of energy savings realised in past years. The institutes concerned are the Central Bureau of Statistics (CBS), the Netherlands Bureau for Economic Policy Analysis (CPB), the Energy research Centre of the Netherlands (ECN), the National Agency for Energy and Environment (Novem) and the Netherlands Institute of Public Health and the Environment (RIVM). The institutes have agreed upon a clear definition of energy use and energy savings. The demarcation with renewable energy, the saving effects of substitution between energy carriers and the role of import and export of energy have been elaborated. A decomposition method is used to split up the observed change in energy use in a number of effects, on a national and sectoral level. This method includes an analysis of growth effects, effects of structural changes in production and consumption activities and savings on end use or with more efficient conversion processes. To calculate these effects the total energy use is desegregated as much as possible. For each segment a reference energy use is calculated according to the trend in a variable which is supposed to be representative for the use without savings. The difference with the actual energy use is taken as the savings realised. Results are given for the sectors households, industry, agriculture, services and government, transportation and the energy sector; as well as a national figure. A special feature of the protocol method is the application of primary energy use figures in the determination of savings for end users. This means that the use of each energy carrier is increased with a certain amount, according to the conversion losses caused elsewhere in the energy system. The losses concern the base year energy sector and losses abroad for imports of secondary
-
Security of the arbitrated quantum signature protocols revisited
International Nuclear Information System (INIS)
Kejia, Zhang; Dan, Li; Qi, Su
2014-01-01
Recently, much attention has been paid to the study of arbitrated quantum signature (AQS). Among these studies, the cryptanalysis of some AQS protocols and a series of improved ideas have been proposed. Compared with the previous analysis, we present a security criterion, which can judge whether an AQS protocol is able to prevent the receiver (i.e. one participant in the signature protocol) from forging a legal signature. According to our results, it can be seen that most AQS protocols which are based on the Zeng and Keitel (ZK) model are susceptible to a forgery attack. Furthermore, we present an improved idea of the ZK protocol. Finally, some supplement discussions and several interesting topics are provided. (paper)
-
Mobile opportunistic networks architectures, protocols and applications
Denko, Mieso K
2011-01-01
Widespread availability of pervasive and mobile devices coupled with recent advances in networking technologies make opportunistic networks one of the most promising communication technologies for a growing number of future mobile applications. Covering the basics as well as advanced concepts, this book introduces state-of-the-art research findings, technologies, tools, and innovations. Prominent researchers from academia and industry report on communication architectures, network algorithms and protocols, emerging applications, experimental studies, simulation tools, implementation test beds,
-
Climate change scenarios and Technology Transfer Protocols
International Nuclear Information System (INIS)
Kypreos, Socrates; Turton, Hal
2011-01-01
We apply a specific version of MERGE-ETL, an integrated assessment model, to study global climate policies supported by Technology Transfer Protocols (TTPs). We model a specific formulation of such a TTP where donor countries finance via carbon tax revenues, the diffusion of carbon-free technologies in developing countries (DCs) and quantify its benefits. Industrialized countries profit from increased technology exports, global diffusion of advanced technology (leading to additional technology learning and cost reductions) and reduced climate damages through the likelihood of greater global participation in a new international agreement. DCs experience increased welfare from access to subsidized technology, and profit from the reduction of damages related to climate change and expected secondary benefits of carbon abatement (such as reduced local and regional air pollution). The analysis identifies potential candidate technologies that could be supported under a TTP, and the impact of a TTP on economic development (including the flow of transfer subsidies) and global emissions. Although a TTP may encourage additional participation, such a proposal is only likely to be successful if an increased willingness to pay to avoid climate damages is accepted, first by the present and future generations of the industrialized world and later on, when sufficient economic growth is accumulated, by today's developing countries. - Research Highlights: → Climate policy scenarios are assessed with differentiated commitments in carbon emission control supported by Technology Transfer Protocols. → Donor countries finance, via carbon-tax revenues, the exports of carbon-free technologies in developing countries helping to get a new international agreement. → Developing countries experience increased welfare from access to subsidized technology, and profit from the reduction of damages related to climate change and secondary benefits. → Under Technology Protocols alone and
-
International Nuclear Information System (INIS)
Phylipsen, D.; Price, L.; Worrell, E.; Blok, K.
1999-01-01
In light of the commitments accepted within the Framework Convention on Climate Change there is an increasing need for useful information on energy consumption and energy efficiency. Governments can use this information in designing policies to reduce greenhouse gas emissions and prioritizing energy savings options. International comparison of energy efficiency can provide a benchmark against which a country's performance can be measured and policies can be evaluated. A methodology for international comparisons of industrial energy efficiency was developed by the International Network on Energy Demand analysis in the Industrial Sector. In this paper this methodology is used to analyze the energy efficiency of two energy-intensive industries in major developing countries. Energy consumption trends are shown for the steel and cement industry and an analysis is made of technologies used. In light of the Byrd-Hagel resolution, which states that the US will not ratify any climate treaty unless it also mandates commitments to limit greenhouse gas emissions for developing countries, the energy efficiency in the two sectors is compared to that of the US. The analysis shows that in the iron and steel sector South Korea and Brazil are more energy-efficient than the US, while Mexico has achieved a comparable energy efficiency level in recent years. For cement, South Korea, Brazil and Mexico are the most efficient countries analyzed. In recent years, China, and especially, India appear to have achieved energy efficiency levels, more or less comparable to that of the US. In light of data constraints, however, further analysis is required
-
Kondisi Migrasi Internet Protocol version 6 (IPv6 di Indonesia
Directory of Open Access Journals (Sweden)
Fahrizal Lukman Budiono
2011-06-01
Full Text Available Sejalan dengan pertumbuhan industri Internet di Indonesia tersebut, maka kebutuhan akan alamat Internet Protocol (IP juga pasti meningkat. Operator Internet akan membutuhkan alamat IP untuk mengembangkan layanannya hingga ke seluruh pelosok negeri. Saat ini, jaringan Internet di Indonesia berikut perangkat-perangkat pendukungnya hingga di tingkat end user masih menggunakan Internet Protocol version 4 (IPv4. Kenyataan yang dihadapi dunia sekarang adalah menipisnya persediaan alamat IPv4 yang dialokasikan. Hal ini dikarenakan jumlah alamat yang dapat didukung oleh IPv4 adalah 232 bits, sedangkan data terakhir didapatkan bahwa alokasi IPv4 telah habis dialokasikan pada akhir April 2011 di tingkat Internet Assigned Numbers Authority (IANA, organisasi yang mengelola sumberdaya protokol Internet dunia. Untuk mempercepat migrasi, stakeholder internet di Indonesia yaitu Kementerian Komunikasi dan Informatika dan Industri Penyelenggara Internet membentuk ID-IPv6TF. Dalam studi ini, ditemukan bahwa implementasi IPv6 di Indonesia termasuk dalam kategori baik dibandingkan dengan negara lain di dunia. Namun, terlihat bahwa perkembangan ini masih sporadis dengan kurangnya peran koordinator, serta sosialiasi ke masyarakat yang tidak ada.
-
Tracking occupational hearing loss across global industries: A comparative analysis of metrics
Directory of Open Access Journals (Sweden)
Peter M Rabinowitz
2012-01-01
Full Text Available Occupational hearing loss is one of the most prevalent occupational conditions; yet, there is no acknowledged international metric to allow comparisons of risk between different industries and regions. In order to make recommendations for an international standard of occupational hearing loss, members of an international industry group (the International Aluminium Association submitted details of different hearing loss metrics currently in use by members. We compared the performance of these metrics using an audiometric data set for over 6000 individuals working in 10 locations of one member company. We calculated rates for each metric at each location from 2002 to 2006. For comparison, we calculated the difference of observed-expected (for age binaural high-frequency hearing loss (in dB/year for each location over the same time period. We performed linear regression to determine the correlation between each metric and the observed-expected rate of hearing loss. The different metrics produced discrepant results, with annual rates ranging from 0.0% for a less-sensitive metric to more than 10% for a highly sensitive metric. At least two metrics, a 10dB age-corrected threshold shift from baseline and a 15dB nonage-corrected shift metric, correlated well with the difference of observed-expected high-frequency hearing loss. This study suggests that it is feasible to develop an international standard for tracking occupational hearing loss in industrial working populations.
-
Acute cardiovascular response of older women to three resistance exercise protocols
Directory of Open Access Journals (Sweden)
Martim Bottaro
2010-02-01
Full Text Available Acute cardiovascular responses to different high-velocity resistance exercise proto-cols were compared in untrained older women. Twelve apparently healthy volunteers (62.6 ± 2.9 years performed three different protocols on the bench press (BP and leg press (LP. All protocols consisted of three sets of 10 repetitions performed with a 10RM load and 2 min of rest between sets. The continuous protocol (CP consisted of 10 repetitions with no pause between repetitions. The discontinuous protocols were performed with a pause of five (DP5 or 15 (DP15 seconds between the fifth and sixth repetition. Heart rate (HR, systolic blood pressure (SBP, and rate pressure product (RPP were assessed at baseline and at the end of all exercise sets. Factorial ANOVA was used to compare the cardiovascular response among different protocols. Compared to baseline, HR, SBP and RPP were, respectively, 22.3%, 23.2% and 51.2% (p < 0.05 higher for BP exercise, and 41.7%, 43.0% and 102.9% (p < 0.05 higher for LP exercise after the third set in all protocols. For BP exercise, HR and RPP were 5.6% and 8.2% (p < 0.05 lower in DP5 and DP15, respectively, compared to CP. For LP exercise, HR, SBP and RPP were, respectively, 5.2%, 8.0% and 14.8% lower in DP5 compared to CP. In conclusion, discontinuous high-velocity resistance exercise seems to have a lower cardiovascular demand than continuous resistance exercise in older women.
-
Topology Discovery Using Cisco Discovery Protocol
Rodriguez, Sergio R.
2009-01-01
In this paper we address the problem of discovering network topology in proprietary networks. Namely, we investigate topology discovery in Cisco-based networks. Cisco devices run Cisco Discovery Protocol (CDP) which holds information about these devices. We first compare properties of topologies that can be obtained from networks deploying CDP versus Spanning Tree Protocol (STP) and Management Information Base (MIB) Forwarding Database (FDB). Then we describe a method of discovering topology ...
-
Assessment and testing of industrial devices robustness against cyber security attacks
International Nuclear Information System (INIS)
Tilaro, F.; Copy, B.
2012-01-01
CERN (European Organization for Nuclear Research),like any organization, needs to achieve the conflicting objectives of connecting its operational network to Internet while at the same time keeping its industrial control systems secure from external and internal cyber attacks. Devices robustness represents a key link in the defense-in-depth concept as some attacks will inevitably penetrate security boundaries and thus require further protection measures. CERN - in collaboration with Siemens - has designed and implemented a dedicated working environment, the Test-bench for Robustness of Industrial Equipment. Such tests attempt to detect possible anomalies by exploiting corrupt communication channels and manipulating the normal behavior of the communication protocols, in the same way as a cyber attacker would proceed. Our approach consists of analyzing protocol implementations by injecting malformed PDUs (Protocol Data Unit) to corrupt the normal behaviour of the system. As a PDU typically has many fields, the number of possible syntactically faulty PDUs grows exponentially with the number of fields. In this document, we proposed a strategy to explore this huge test domain using a hybrid approach of fuzzing and syntax techniques, specifically developed to evaluate industrial device communication robustness. So far, not all the tests can be integrated into automatic tools, human analysis and management is necessary to discover and investigate specific possible failures
-
He, Weiwei; Wang, Yuan; Zuo, Jian; Luo, Yincheng
2017-11-01
To investigate the driving forces of air pollution in China, the changes in linkages amongst inter-industrial air pollutant emissions were analyzed by hypothetical extraction method under the input-output framework. Results showed that the emissions of SO 2 , soot and dust from industrial sources increased by 56.46%, 36.95% and 11.69% respectively in 2010, compared with 2002. As major contributors to emissions, the power and gas sectors were responsible for the growing SO 2 emissions, the nonmetal products sector for soot emissions, and the metals mining, smelting and pressing sectors for dust emissions. The increasing volume of emissions was mainly driven by the growing demand in the transport equipment and electrical equipment sectors. In addition, the expansion in the metals mining, smelting and pressing sectors could result in even more severe air pollution. Therefore, potential effective strategies to control air pollution in China are: (1) reducing the demand of major import sectors in the equipment manufacturing industry; (2) promoting R&D in low-emissions-production technologies to the power and gas sectors, the metals mining, smelting and pressing sectors, and the nonmetal products sector, and (3) auditing the considerable industrial scale expansion in the metals mining, smelting and pressing sectors and optimizing the industrial structure. Copyright © 2017 Elsevier Ltd. All rights reserved.
-
Security analysis of standards-driven communication protocols for healthcare scenarios.
Masi, Massimiliano; Pugliese, Rosario; Tiezzi, Francesco
2012-12-01
The importance of the Electronic Health Record (EHR), that stores all healthcare-related data belonging to a patient, has been recognised in recent years by governments, institutions and industry. Initiatives like the Integrating the Healthcare Enterprise (IHE) have been developed for the definition of standard methodologies for secure and interoperable EHR exchanges among clinics and hospitals. Using the requisites specified by these initiatives, many large scale projects have been set up for enabling healthcare professionals to handle patients' EHRs. The success of applications developed in these contexts crucially depends on ensuring such security properties as confidentiality, authentication, and authorization. In this paper, we first propose a communication protocol, based on the IHE specifications, for authenticating healthcare professionals and assuring patients' safety. By means of a formal analysis carried out by using the specification language COWS and the model checker CMC, we reveal a security flaw in the protocol thus demonstrating that to simply adopt the international standards does not guarantee the absence of such type of flaws. We then propose how to emend the IHE specifications and modify the protocol accordingly. Finally, we show how to tailor our protocol for application to more critical scenarios with no assumptions on the communication channels. To demonstrate feasibility and effectiveness of our protocols we have fully implemented them.
-
Compact Modbus TCP/IP protocol for data acquisition systems based on limited hardware resources
Bai, Q.; Jin, B.; Wang, D.; Wang, Y.; Liu, X.
2018-04-01
The Modbus TCP/IP has been a standard industry communication protocol and widely utilized for establishing sensor-cloud platforms on the Internet. However, numerous existing data acquisition systems built on traditional single-chip microcontrollers without sufficient resources cannot support it, because the complete Modbus TCP/IP protocol always works dependent on a full operating system which occupies abundant hardware resources. Hence, a compact Modbus TCP/IP protocol is proposed in this work to make it run efficiently and stably even on a resource-limited hardware platform. Firstly, the Modbus TCP/IP protocol stack is analyzed and the refined protocol suite is rebuilt by streamlining the typical TCP/IP suite. Then, specific implementation of every hierarchical layer is respectively presented in detail according to the protocol structure. Besides, the compact protocol is implemented in a traditional microprocessor to validate the feasibility of the scheme. Finally, the performance of the proposed scenario is assessed. The experimental results demonstrate that message packets match the frame format of Modbus TCP/IP protocol and the average bandwidth reaches to 1.15 Mbps. The compact protocol operates stably even based on a traditional microcontroller with only 4-kB RAM and 12-MHz system clock, and no communication congestion or frequent packet loss occurs.
-
Evaluation of an adult insulin infusion protocol at an academic medical center.
Petrov, Katerina I; Burns, Tammy L; Drincic, Andjela
2012-05-01
Acknowledging evidence of possible detrimental effects of tightly controlled blood glucose levels, the American Association of Clinical Endocrinologists and the American Diabetes Association published a consensus statement recommending less strict control for most diabetic patients. As a result of these recommendations, our academic center at Creighton University Medical Center revised its adult insulin infusion protocol to target blood glucose levels ranging from 120 to 180 mg/dL for regular (standard) glycemic control and 80 to 120 mg/dL for tight control; previous targets had ranged from 80 to 180 mg/dL and 70 to 110 mg/dL, respectively. The primary objective was to evaluate the time that blood glucose values were within the target range for patients receiving the new protocol, compared with patients receiving the previous protocol. Our study was designed to evaluate the effectiveness and safety of the revised protocol. Using a retrospective chart review, we collected data for 4 months from patients on the old insulin protocol (May to August 2009) and for 4 months from patients on the new protocol (September to December 2009). Secondary endpoints included the number of hypoglycemic episodes (blood glucose below 70 mg/dL) and severe hypoglycemic episodes (blood glucose 40 mg/dL or lower) experienced by patients receiving the new insulin protocol compared with those receiving the former protocol. Patient characteristics were similar at baseline. Blood glucose values stayed within the target range for a significantly shorter time with the new protocol than with the former protocol (44.6% vs. 56.8%, respectively; P protocol. No statistically significant differences in hypoglycemia were observed after the protocol was changed. Hypoglycemia occurred in 31% of the former-protocol patients compared with 18% of the revised-protocol patients. Severe hypoglycemia was experienced by 2.1% of patients on the old protocol and by 3.1% of patients on the new protocol. Rates of
-
Directory of Open Access Journals (Sweden)
Dolores del Mar Sánchez González
2013-05-01
Full Text Available ResumenMuchos son los estudios existentes referidos al protocolo y al ceremonial universitario español. Todos ellos parten del estudio del ceremonial tradicional en las universidades en un intento de aunar el protocolo común a todas ellas bajo el término “protocolo universitario”, pero no existe ningún estudio que analice comparativamente la regulación existente en cada una de ellas para poder generar un marco ideal que pueda conformar el protocolo de cualquier universidad en España, unificando la dispersión existente, para conformar un marco general, muy útil a efectos prácticos, que sirva de modelo de este tipo especial de relaciones públicas especializadas aplicada a un área concreta.AbstractMany existing studies relating to protocol and ceremonial Spanish university. All of them are based on the study of traditional ceremonial universities in an attempt to unite the common protocol for all under the term "university protocol", but there is no study to analyze comparatively the regulations of each in order to generate a ideal that can conform to the protocol of any university in Spain, unifying the existing dispersion to form a general framework, useful for practical purposes, to serve as a model for this particular type of specialized public relations applied to a specific area.
-
Biopiracy after the Nagoya Protocol: Problem Structure, Regime Design and Implementation Challenges
Directory of Open Access Journals (Sweden)
Florian Rabitz
2015-08-01
Full Text Available This article assesses the effectiveness of the 2010 Nagoya Protocol to the Convention on Biological Diversity (CBD for addressing "biopiracy" of genetic resources; that is, their biotechnological utilization in violation of either the provider country legislation or mutually agreed contractual obligations. Biopiracy is defined as a problem resulting from a distributive conflict between provider and user countries, the practical difficulties of monitoring the utilization of genetic resources in a transnational context, and the pervasive scientific uncertainty about the nature and extent of the problem. The Nagoya Protocol predominantly focuses on compliance management while lacking the necessary enforcement provisions for deterring non-compliance through effective monitoring and sanctions. Using the example of recent European Union implementing legislation, this article underscores how parties may use the Protocol's legal ambiguities to soften its regulatory impact on domestic industry. As a result, in light of both problem structure and regime design, the Protocol only offers modest improvements over the status quo ante.
-
Telerobotics: through-the-Internet teleoperation of the ABB IRB 2000 industrial robot
Alvares, Alberto J.; Caribe de Carvalho, Guilherme; Paulinyi, Luis F. d. A.; Alfaro, Sadek C. A.
1999-11-01
Robotic systems can be controlled remotely through the use of telerobotics. This work presents a through-the-internet teleoperation system for remotely operating the IRB2000 industrial robot. The IRB2000 controller allows external access through a RS232 serial communication link, which is based on a 42 function proprietary communication protocol. The proposed teleoperation system uses this communication capability by connecting it to a local area network based on TCP/IP (Transport Control Protocol/Internet Protocol). The system was implemented using a Client/Server architecture, having as server a UNIX (LINUX) platform.
-
Physical Therapy Protocols for Arthroscopic Bankart Repair.
DeFroda, Steven F; Mehta, Nabil; Owens, Brett D
Outcomes after arthroscopic Bankart repair can be highly dependent on compliance and participation in physical therapy. Additionally, there are many variations in physician-recommended physical therapy protocols. The rehabilitation protocols of academic orthopaedic surgery departments vary widely despite the presence of consensus protocols. Descriptive epidemiology study. Level 3. Web-based arthroscopic Bankart rehabilitation protocols available online from Accreditation Council for Graduate Medical Education (ACGME)-accredited orthopaedic surgery programs were included for review. Individual protocols were reviewed to evaluate for the presence or absence of recommended therapies, goals for completion of ranges of motion, functional milestones, exercise start times, and recommended time to return to sport. Thirty protocols from 27 (16.4%) total institutions were identified out of 164 eligible for review. Overall, 9 (30%) protocols recommended an initial period of strict immobilization. Variability existed between the recommended time periods for sling immobilization (mean, 4.8 ± 1.8 weeks). The types of exercises and their start dates were also inconsistent. Goals to full passive range of motion (mean, 9.2 ± 2.8 weeks) and full active range of motion (mean, 12.2 ± 2.8 weeks) were consistent with other published protocols; however, wide ranges existed within the reviewed protocols as a whole. Only 10 protocols (33.3%) included a timeline for return to sport, and only 3 (10%) gave an estimate for return to game competition. Variation also existed when compared with the American Society of Shoulder and Elbow Therapists' (ASSET) consensus protocol. Rehabilitation protocols after arthroscopic Bankart repair were found to be highly variable. They also varied with regard to published consensus protocols. This discrepancy may lead to confusion among therapists and patients. This study highlights the importance of attending surgeons being very clear and specific with
-
International Nuclear Information System (INIS)
Van Atta, Angela J.; Baskin, Henry J.; Maves, Connie K.; Dansie, David M.; Rollins, Michael D.; Bolte, Robert G.; Mundorff, Michael B.; Andrews, Seth P.
2015-01-01
The use of ultrasound to diagnose appendicitis in children is well-documented but not universally employed outside of pediatric academic centers, especially in the United States. Various obstacles make it difficult for institutions and radiologists to abandon a successful and accurate CT-based imaging protocol in favor of a US-based protocol. To describe how we overcame barriers to implementing a US-based appendicitis protocol among a large group of nonacademic private-practice pediatric radiologists while maintaining diagnostic accuracy and decreasing medical costs. A multidisciplinary team of physicians (pediatric surgery, pediatric emergency medicine and pediatric radiology) approved an imaging protocol using US as the primary modality to evaluate suspected appendicitis with CT for equivocal cases. The protocol addressed potential bias against US and accommodated for institutional limitations of radiologist and sonographer experience and availability. Radiologists coded US reports according to the probability of appendicitis. Radiology reports were compared with clinical outcomes to assess diagnostic accuracy. During the study period, physicians from each group were apprised of the interim US protocol accuracy results. Problematic cases were discussed openly. A total of 512 children were enrolled and underwent US for evaluation of appendicitis over a 30-month period. Diagnostic accuracy was comparable to published results for combined US/CT protocols. Comparing the first 12 months to the last 12 months of the study period, the proportion of children achieving an unequivocal US result increased from 30% (51/169) to 53% (149/282) and the proportion of children undergoing surgery based solely on US findings increased from 55% (23/42) to 84% (92/109). Overall, 63% (325/512) of patients in the protocol did not require a CT. Total patient costs were reduced by $30,182 annually. We overcame several barriers to implementing a US protocol. During the study period our
-
Energy Technology Data Exchange (ETDEWEB)
Van Atta, Angela J. [University of Utah School of Medicine, Salt Lake City, UT (United States); Baskin, Henry J.; Maves, Connie K.; Dansie, David M. [Primary Children' s Hospital, Department of Radiology, Salt Lake City, UT (United States); Rollins, Michael D. [University of Utah School of Medicine, Department of Surgery, Division of Pediatric Surgery, Salt Lake City, UT (United States); Bolte, Robert G. [University of Utah School of Medicine, Department of Pediatrics, Division of Pediatric Emergency Medicine, Salt Lake City, UT (United States); Mundorff, Michael B.; Andrews, Seth P. [Primary Children' s Hospital, Systems Improvement, Salt Lake City, UT (United States)
2015-05-01
The use of ultrasound to diagnose appendicitis in children is well-documented but not universally employed outside of pediatric academic centers, especially in the United States. Various obstacles make it difficult for institutions and radiologists to abandon a successful and accurate CT-based imaging protocol in favor of a US-based protocol. To describe how we overcame barriers to implementing a US-based appendicitis protocol among a large group of nonacademic private-practice pediatric radiologists while maintaining diagnostic accuracy and decreasing medical costs. A multidisciplinary team of physicians (pediatric surgery, pediatric emergency medicine and pediatric radiology) approved an imaging protocol using US as the primary modality to evaluate suspected appendicitis with CT for equivocal cases. The protocol addressed potential bias against US and accommodated for institutional limitations of radiologist and sonographer experience and availability. Radiologists coded US reports according to the probability of appendicitis. Radiology reports were compared with clinical outcomes to assess diagnostic accuracy. During the study period, physicians from each group were apprised of the interim US protocol accuracy results. Problematic cases were discussed openly. A total of 512 children were enrolled and underwent US for evaluation of appendicitis over a 30-month period. Diagnostic accuracy was comparable to published results for combined US/CT protocols. Comparing the first 12 months to the last 12 months of the study period, the proportion of children achieving an unequivocal US result increased from 30% (51/169) to 53% (149/282) and the proportion of children undergoing surgery based solely on US findings increased from 55% (23/42) to 84% (92/109). Overall, 63% (325/512) of patients in the protocol did not require a CT. Total patient costs were reduced by $30,182 annually. We overcame several barriers to implementing a US protocol. During the study period our
-
Zhibo, Ren; Kai, Liu; Wei, Wu
This paper analyzed and compared the competitive power of steel industry of 30 provinces in our country. At first, we extracted the data containing 16 economic indicators to reflect each province's business conditions of steel industry, then used correspondence analysis method to process the data. We can get every province's level located in the domestic steel industry and its corresponding advantage. This conclusion has important reference value for every province to develop its steel industry's policy.
-
Energy Technology Data Exchange (ETDEWEB)
Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Benton, Nathanael [Nexant, Inc., San Francisco, CA (United States); Burns, Patrick [Nexant, Inc., San Francisco, CA (United States)
2017-10-18
Compressed-air systems are used widely throughout industry for many operations, including pneumatic tools, packaging and automation equipment, conveyors, and other industrial process operations. Compressed-air systems are defined as a group of subsystems composed of air compressors, air treatment equipment, controls, piping, pneumatic tools, pneumatically powered machinery, and process applications using compressed air. A compressed-air system has three primary functional subsystems: supply, distribution, and demand. Air compressors are the primary energy consumers in a compressed-air system and are the primary focus of this protocol. The two compressed-air energy efficiency measures specifically addressed in this protocol are: High-efficiency/variable speed drive (VSD) compressor replacing modulating, load/unload, or constant-speed compressor; and Compressed-air leak survey and repairs. This protocol provides direction on how to reliably verify savings from these two measures using a consistent approach for each.
-
Energy Technology Data Exchange (ETDEWEB)
Robles, B.; Mora, J. C.; Corbacho, J. A.; Baeza, A.; Cancio, D.
2011-07-01
This protocol arises from the execution of R and D project Study of the radiological impact of coal power plants on their environment, funded by the Nuclear Safety Council. Its main objective was to assess the radiological impact exerted on workers and their environments, the four coal-fired power more currently in Spain: As Pontes (A Coruna), Compostilla II (Leon ),Litoral (Almeria) and Andorra (Teruel). (Author)
-
Comparative Analysis of Master of Industrial Design Education in Turkey
Erkarslan, Onder; Imamogullari, Beril
2010-01-01
This research focused on the masters degree programme in industrial design (ID), which is research and practice oriented in the light of current themes and design principles. It argued that a masters degree in industrial design would help graduates specialise in the related field and improve their skills. Therefore, institutional and academic…
-
Model-based prototyping of an interoperability protocol for mobile ad-hoc networks
Kristensen, L.M.; Westergaard, M.; Norgaard, P.C.; Romijn, J.; Smith, G.; Pol, van de J.
2005-01-01
We present an industrial project conducted at Ericsson Danmark A/S, Telebit where formal methods in the form of Coloured Petri Nets (CP-nets or CPNs) have been used for the specification of an interoperability protocol for routing packets between fixed core networks and mobile ad-hoc networks. The
-
The Gothenburg Protocol: NOx emissions problematic for Norway
International Nuclear Information System (INIS)
Lind, Oddvar
2000-01-01
The Gothenburg Protocol concerns long-range air pollution and is a continuation of earlier protocols and agreements. Its recommendations are based on calculations of where the greatest possible health- and environmental impact is obtained per dollar invested. European countries have done much to reduce the emission of sulphur dioxide. Norway and most other countries, however, have difficulties reducing their emissions of nitrogen oxides. In Norway, the emission of sulphur dioxide must also be substantially reduced, as the tolerance limit for SO2 in nature is low. It is socio-economically profitable for Norway to conform to the Gothenburg Protocol. One of the largest environmental problems in Norway is acid rain and death of fish. Although it is difficult to calculate the exact values of fishing-lakes and of reduced health injuries when the emissions of harmful waste gases are reduced, the profit is very high. 90% of the SO2 pollution in Norway is long-range transported from abroad. Yet Norway must reduce the domestic emissions from 30 000 to 22 000 tonnes the next 10 years. Most of the present emission of SO2 in Norway comes from the production of metals. The reduction goal can be achieved by a combination of improving industrial processes, SO2 cleaning, and reducing the sulphur content of oil. In many European countries, the greatest problem is the increasing emission of NOx and formation of ozone at the ground, which is largely due to the rapidly increasing motor traffic. In Norway, most of the NOx emission comes from the coastal traffic and the fishing fleet, followed by the motor traffic, the petroleum industry and the processing industry. The most cost-effective NOx reductions can be obtained in the North Sea by installing low-NOx gas turbines. In ships, catalytic cleaning of NOx and engine improvements will contribute. On land, the goods traffic can be made more efficient. Most of the emission of ammonia comes from agriculture, where special measures are
-
Solar cooling - comparative study between thermal and electrical use in industrial buildings
Badea, N.; Badea, G. V.; Epureanu, A.; Frumuşanu, G.
2016-08-01
The increase in the share of renewable energy sources together with the emphasis on the need for energy security bring to a spotlight the field of trigeneration autonomous microsystems, as a solution to cover the energy consumptions, not only for isolated industrial buildings, but also for industrial buildings located in urban areas. The use of solar energy for cooling has been taken into account to offer a cooling comfort in the building. Cooling and air- conditioned production are current applications promoting the use of solar energy technologies. Solar cooling systems can be classified, depending on the used energy, in electrical systems using mechanical compression chillers and systems using thermal compression by absorption or adsorption. This comparative study presents the main strengths and weaknesses of solar cooling obtained: i) through the transformation of heat resulted from thermal solar panels combined with adsorption chillers, and ii) through the multiple conversion of electricity - photovoltaic panels - battery - inverter - combined with mechanical compression chillers. Both solutions are analyzed from the standpoints of energy efficiency, dynamic performances (demand response), and costs sizes. At the end of the paper, experimental results obtained in the climatic condition of Galafi city, Romania, are presented.
-
DiLuigi, Andrea J; Engmann, Lawrence; Schmidt, David W; Benadiva, Claudio A; Nulsen, John C
2011-06-30
We performed a randomized trial to compare IVF outcomes in 54 poor responder patients undergoing a microdose leuprolide acetate (LA) protocol or a GnRH antagonist protocol incorporating a luteal phase E(2) patch and GnRH antagonist in the preceding menstrual cycle. Cancellation rates, number of oocytes retrieved, clinical pregnancy rates (PR), and ongoing PRs were similar between the two groups. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.
-
Cunha, Ronaldo Alves da; Dias, Andreia Natacha; Santos, Marcelo Bannwart; Lopes, Alexandre Dias
2012-01-01
INTRODUCTION: The eccentric squat on a slope has been proved effective in conservative treatment of patellar tendinopathy, especially in the athletic population. However, several aspects such as intensity and pain during therapy still differ among authors. OBJECTIVES: To compare the effectiveness of two protocols of eccentric exercise (performed with and without pain), in the improvement of knee function and pain intensity in athletes with patellar tendinopathy. METHODS: 7 athletes of both ge...
-
Optimizing the ASC WAN: evaluating network performance tools for comparing transport protocols.
Energy Technology Data Exchange (ETDEWEB)
Lydick, Christopher L.
2007-07-01
The Advanced Simulation & Computing Wide Area Network (ASC WAN), which is a high delay-bandwidth network connection between US Department of Energy National Laboratories, is constantly being examined and evaluated for efficiency. One of the current transport-layer protocols which is used, TCP, was developed for traffic demands which are different from that on the ASC WAN. The Stream Control Transport Protocol (SCTP), on the other hand, has shown characteristics which make it more appealing to networks such as these. Most important, before considering a replacement for TCP on any network, a testing tool that performs well against certain criteria needs to be found. In order to try to find such a tool, two popular networking tools (Netperf v.2.4.3 & v.2.4.6 (OpenSS7 STREAMS), and Iperf v.2.0.6) were tested. These tools implement both TCP and SCTP and were evaluated using four metrics: (1) How effectively can the tool reach a throughput near the bandwidth? (2) How much of the CPU does the tool utilize during operation? (3) Is the tool freely and widely available? And, (4) Is the tool actively developed? Following the analysis of those tools, this paper goes further into explaining some recommendations and ideas for future work.
-
Comparison of protocols for genomic DNA extraction from 'velame ...
African Journals Online (AJOL)
usuario
2013-07-24
Jul 24, 2013 ... involving C. linearifolius, we compared the efficiency of six protocols for genomic DNA extraction previously ... phytic, with diverse aspect and floristics, average rainfall between ..... The variation observed for DNA concentrations estimated with .... performed with protocol 1 (data not shown), or still, bands.
-
Bidirectional Quantum Secure Direct Communication Network Protocol with Hyperentanglement
International Nuclear Information System (INIS)
Gu Bin; Chen Yulin; Huang Yugai; Fang Xia
2011-01-01
We propose a bidirectional quantum secure direct communication (QSDC) network protocol with the hyperentanglment in both the spatial-mode ad the polarization degrees of freedom of photon pairs which can in principle be produced with a beta barium borate crystal. The secret message can be encoded on the photon pairs with unitary operations in these two degrees of freedom independently. Compared with other QSDC network protocols, our QSDC network protocol has a higher capacity as each photon pair can carry 4 bits of information. Also, we discuss the security of our QSDC network protocol and its feasibility with current techniques. (general)
-
Outdoor Irrigation Measurement and Verification Protocol
Energy Technology Data Exchange (ETDEWEB)
Kurnik, Charles W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Stoughton, Kate M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Figueroa, Jorge [Western Resource Advocates, Boulder, CO (United States)
2017-12-05
This measurement and verification (M&V) protocol provides procedures for energy service companies (ESCOs) and water efficiency service companies (WESCOs) to determine water savings resulting from water conservation measures (WCMs) in energy performance contracts associated with outdoor irrigation efficiency projects. The water savings are determined by comparing the baseline water use to the water use after the WCM has been implemented. This protocol outlines the basic structure of the M&V plan, and details the procedures to use to determine water savings.
-
Directory of Open Access Journals (Sweden)
Francisco Rubio
2015-01-01
Full Text Available In this paper an analysis of productivity will be carried out from the resolution of the problem of trajectory planning of industrial robots. The analysis entails economic considerations, thus overcoming some limitations of the existing literature. Two methodologies based on optimization-simulation procedures are compared to calculate the time needed to perform an industrial robot task. The simulation methodology relies on the use of robotics and automation software called GRASP. The optimization methodology developed in this work is based on the kinematics and the dynamics of industrial robots. It allows us to pose a multiobjective optimization problem to assess the trade-offs between the economic variables by means of the Pareto fronts. The comparison is carried out for different examples and from a multidisciplinary point of view, thus, to determine the impact of using each method. Results have shown the opportunity costs of non using the methodology with optimized time trajectories. Furthermore, it allows companies to stay competitive because of the quick adaptation to rapidly changing markets.
-
Safety of 100 µg venom immunotherapy rush protocols in children compared to adults.
Stoevesandt, Johanna; Hosp, Christine; Kerstan, Andreas; Trautmann, Axel
2017-01-01
There is a paucity of studies examining the safety of venom immunotherapy (VIT) in children. We aimed to assess the incidence of anaphylactic side effects during rush VIT in a cohort of pediatric patients and adult controls. 72 consecutive cycles of VIT-buildup in 71 children/adolescents aged 7-17 years were retrospectively evaluated and compared to an adult control group (n = 981) with regard to baseline parameters (sex, causative venom, severity of index sting reaction, results of allergy testing, comorbidities) and the incidence of anaphylactic adverse reactions. Compared to adults, severe index sting-induced anaphylaxis was significantly less common in children ( P = .001). Children were more likely to suffer from bee venom allergy ( P bee venom-specific IgE ( P = .013), but lower serum tryptase concentrations ( P = .014). The overall rate of VIT-induced anaphylactic reactions was higher in children than in adults (6.9% vs 2.5%, P = .046 by univariate analysis). In the final binary logistic regression model, however, only bee VIT ( P = .039; odds ratio 2.25; confidence interval 1.04-4.87) and 5-day compared to 3-day buildup protocols ( P = .011; odds ratio 2.64; confidence interval 1.25-5.57) were associated with an increased risk of treatment-induced anaphylaxis. All pediatric patients finally reached and tolerated the target maintenance dose of 100 µg. The higher anaphylactic reaction rate observed in pediatric patients may be attributed to a greater prevalence of bee venom allergy. VIT-induced anaphylaxis in children is usually mild and does not affect further updosing and maintenance of VIT.
-
Protocol Implementation Generator
DEFF Research Database (Denmark)
Carvalho Quaresma, Jose Nuno; Probst, Christian W.
2010-01-01
Users expect communication systems to guarantee, amongst others, privacy and integrity of their data. These can be ensured by using well-established protocols; the best protocol, however, is useless if not all parties involved in a communication have a correct implementation of the protocol and a...... Generator framework based on the LySatool and a translator from the LySa language into C or Java....... necessary tools. In this paper, we present the Protocol Implementation Generator (PiG), a framework that can be used to add protocol generation to protocol negotiation, or to easily share and implement new protocols throughout a network. PiG enables the sharing, verification, and translation...
-
Ocean fertilization, carbon credits and the Kyoto Protocol
Westley, M. B.; Gnanadesikan, A.
2008-12-01
Commercial interest in ocean fertilization as a carbon sequestration tool was excited by the December 1997 agreement of the Kyoto Protocol to the United Nations Convention on Climate Change. The Protocol commits industrialized countries to caps on net greenhouse gas emissions and allows for various flexible mechanisms to achieve these caps in the most economically efficient manner possible, including trade in carbon credits from projects that reduce emissions or enhance sinks. The carbon market was valued at 64 billion in 2007, with the bulk of the trading (50 billion) taking place in the highly regulated European Union Emission Trading Scheme, which deals primarily in emission allowances in the energy sector. A much smaller amount, worth $265 million, was traded in the largely unregulated "voluntary" market (Capoor and Ambrosi 2008). As the voluntary market grows, so do calls for its regulation, with several efforts underway to set rules and standards for the sale of voluntary carbon credits using the Kyoto Protocol as a starting point. Four US-based companies and an Australian company currently seek to develop ocean fertilization technologies for the generation of carbon credits. We review these plans through the lens of the Kyoto Protocol and its flexible mechanisms, and examine whether and how ocean fertilization could generate tradable carbon credits. We note that at present, ocean sinks are not included in the Kyoto Protocol, and that furthermore, the Kyoto Protocol only addresses sources and sinks of greenhouse gases within national boundaries, making open-ocean fertilization projects a jurisdictional challenge. We discuss the negotiating history behind the limited inclusion of land use, land use change and forestry in the Kyoto Protocol and the controversy and eventual compromise concerning methodologies for terrestrial carbon accounting. We conclude that current technologies for measuring and monitoring carbon sequestration following ocean fertilization
-
Tai, Wan-Ping; Ku, Samuel
2013-01-01
Numerous differences exist between the neoclassical and national development schools of economics on how an economy should develop. For example, should the state interfere in the market using state resources, and cultivate certain industries to achieve specific developmental goals? Although the automotive industries in both Thailand and Malaysia developed in the 1970s with considerable government involvement, they have evolved along very different lines. Can these differences be traced to dif...
-
Evaluation of Protocol Uniformity Concerning Laparoscopic Cholecystectomy in The Netherlands
Goossens, Richard H. M.; van Eijk, Daan J.; Lange, Johan F.
2008-01-01
Background Iatrogenic bile duct injury remains a current complication of laparoscopic cholecystectomy. One uniform and standardized protocol, based on the “critical view of safety” concept of Strasberg, should reduce the incidence of this complication. Furthermore, owing to the rapid development of minimally invasive surgery, technicians are becoming more frequently involved. To improve communication between the operating team and technicians, standardized actions should also be defined. The aim of this study was to compare existing protocols for laparoscopic cholecystectomy from various Dutch hospitals. Methods Fifteen Dutch hospitals were contacted for evaluation of their protocols for laparoscopic cholecystectomy. All evaluated protocols were divided into six steps and were compared accordingly. Results In total, 13 hospitals responded—5 academic hospitals, 5 teaching hospitals, 3 community hospitals—of which 10 protocols were usable for comparison. Concerning the trocar positions, only minor differences were found. The concept of “critical view of safety” was represented in just one protocol. Furthermore, the order of clipping and cutting the cystic artery and duct differed. Descriptions of instruments and apparatus were also inconsistent. Conclusions Present protocols differ too much to define a universal procedure among surgeons in The Netherlands. The authors propose one (inter)national standardized protocol, including standardized actions. This uniform standardized protocol has to be officially released and recommended by national scientific associations (e.g., the Dutch Society of Surgery) or international societies (e.g., European Association for Endoscopic Surgery and Society of American Gastrointestinal and Endoscopic Surgeons). The aim is to improve patient safety and professional communication, which are necessary for new developments. PMID:18224485
-
Legacy to Industry 4.0: A Profibus Sniffer
Tsegaye Mamo, Fesseha; Sikora, Axel; Rathfelder, Christoph
2017-07-01
Legacy industrial communication protocols are proved robust and functional. During the last decades, the industry has invented completely new or advanced versions of the legacy communication solutions. However, even with the high adoption rate of these new solutions, still the majority industry applications run on legacy, mostly fieldbus related technologies. Profibus is one of those technologies that still keep on growing in the market, albeit a slow in market growth in recent years. A retrofit technology that would enable these technologies to connect to the Internet of Things, utilize the ever growing potential of data analysis, predictive maintenance or cloud-based application, while at the same time not changing a running system is fundamental.
-
The influence of the Cartagena Protocol on Biosafety: Comparing Mexico, China and South Africa..
Gupta, A.; Falkner, R.
2006-01-01
This paper analyzes how the Cartagena Protocol on Biosafety, a global regime governing trade in genetically modified organisms (GMOs), is influencing agricultural biotechnology policy choices in developing countries/emerging economies. Through empirical analysis of Mexico, China and South Africa, we
-
Perancangan dan Analisis Redistribution Routing Protocol OSPF dan EIGRP
Directory of Open Access Journals (Sweden)
DWI ARYANTA
2014-07-01
OSPF (Open Shortest Path First and EIGRP (Enhanced Interior Gateway Routing Protocol are two routing protocols are widely used in computer networks. Differences between the characteristics of routing protocols pose a problem in the delivery of data packets. Redistribution technique is the solution for communication between routing protocols. By using the software Cisco Packet Tracer 5.3 in this study were made simulating OSPF and EIGRP redistribution linked by technique, then compared its quality with a single EIGRP and OSPF routing protocols. Testing parameters in this study is the value of the time delay and trace route. Value trace route based on direct calculation of cost and metric compared with the simulation results. The result can be OSPF and EIGRP redistribution process. Value delay redistribution 1% better than OSPF and EIGRP 2-3% under traffic density dependent. In calculating the trace route redistribution is done 2 calculations, the cost for OSPF area and the area of the EIGRP metric. Making primary and alternate paths based on the packet delivery rate and the cost of the smallest metric, it is proved by calculation and simulation. Keywords: OSPF, EIGRP, Redistribution, Delay, Cost, Metric.
-
Sincalide - the final protocol
International Nuclear Information System (INIS)
Clarke, E.A.; Notghi, A.; Hesslewood, S.R.; Harding, L.K.
2002-01-01
Full text: HIDA biliary studies examine the gallbladder (GB) to give a percentage ejection fraction (EF). Porcine CCK was an accepted agent for stimulating the GB prior to being withdrawn in the UK from 1998. Sincalide (a synthetic CCK) was the suggested replacement. We have tried many administration regimes in an attempt to get results comparable with our established CCK protocols. Dose concentration and length of infusion times have been studied. Initially a dose of 10 ngm/kg/min given over 2 minutes (manufacturer's recommended dose) was used. This gave falsely low ejection fractions. The dose was reduced to 3 ngm/kg/min over 3 minutes as it was felt the higher dose may be causing constriction of the sphincter of Oddi. This gave a slight improvement with 22 % of patients having normal EF (>35 %). The length of infusion was extended to 15 minutes and the dose concentration reduced again to 0.6 ngm/kg/min. 62 % of patients had a normal EF. However, on many of the curves the gallbladder was still contracting on completion of the 15 minute infusion and began to refill immediately after stopping Sincalide. A further change of protocol was indicated. The infusion time was extended to 30 minutes and the dose concentration per minute kept the same. Imaging began at 30 minutes post HIDA injection and continued for a total of 50 minutes. Sincalide infusion began at 35 minutes if a GB was visualized. This protocol has been performed on 17 patients. 53 % of these had a normal result (comparable with a normal rate of 40 % previously established with CCK) with a mean EF of 60 %. The mean EF of patients with abnormal studies was 15 %. Curves showed a plateau by 30 minutes in 94 % of patients indicating that gallbladder contraction was complete. No normal range is available so results were compared with ultrasound (US). All patients who had an abnormal US scan also had abnormal HIDA results. Three patients had a normal US scan and abnormal HIDA study. These are currently
-
The Implications of Industrial Management for the Administration of Industrial Education Programs
White, Michael R.
1978-01-01
The paper discusses the functions and principles of industrial management, compares educational and industrial organization, and notes industrial management techniques applicable to industrial education administration. (MF)
-
A two-step quantum secure direct communication protocol with hyperentanglement
International Nuclear Information System (INIS)
Gu Bin; Zhang Cheng-Yi; Huang Yu-Gai; Fang Xia
2011-01-01
We propose a two-step quantum secure direct communication (QSDC) protocol with hyperentanglement in both the spatial-mode and the polarization degrees of freedom of photon pairs which can in principle be produced with a beta barium borate crystal. The secret message can be encoded on the photon pairs with unitary operations in these two degrees of freedom independently. This QSDC protocol has a higher capacity than the original two-step QSDC protocol as each photon pair can carry 4 bits of information. Compared with the QSDC protocol based on hyperdense coding, this QSDC protocol has the immunity to Trojan horse attack strategies with the process for determining the number of the photons in each quantum signal as it is a one-way quantum communication protocol. (general)
-
DEFF Research Database (Denmark)
Groß, Thomas; Mödersheim, Sebastian Alexander
2011-01-01
The security of key exchange and secure channel protocols, such as TLS, has been studied intensively. However, only few works have considered what happens when the established keys are actually used—to run some protocol securely over the established “channel”. We call this a vertical protocol.......e., that the combination cannot introduce attacks that the individual protocols in isolation do not have. In this work, we prove a composability result in the symbolic model that allows for arbitrary vertical composition (including self-composition). It holds for protocols from any suite of channel and application...
-
Better infrastructure: industry-academia partnerships--a marriage of convenience?
Abraham, Edward
2009-01-01
The successful design and completion of clinical trials often requires participation of both industry and academia. Although there may be differing priorities for academic and industry participants, both bring important insights and resources to the clinical trial effort. Although industry generally is primarily responsible for preclinical development and funding of the study and academia for patient recruitment and participation in the data safety monitoring board and clinical coordinating center, there are also a number of important areas, including protocol design, data analysis, and manuscript preparation where both academia and industry can supply important insights. Inherent tensions may exist in the academic-industry relationship, including important issues relating to conflict of interest for both academic and industry participants. Nevertheless, the academic-industry partnership, if appropriately organized, can perform in a synergistic fashion, allowing exploration of novel therapies, elucidation of important mechanisms, and greater understanding of critical illness through using combined approaches that generate insights unable to be provided by either partner alone.
-
Financial risk of the biotech industry versus the pharmaceutical industry.
Golec, Joseph; Vernon, John A
2009-01-01
The biotech industry now accounts for a substantial and growing proportion of total R&D spending on new medicines. However, compared with the pharmaceutical industry, the biotech industry is financially fragile. This article illustrates the financial fragility of the biotech and pharmaceutical industries in the US and the implications of this fragility for the effects that government regulation could have on biotech firms. Graphical analysis and statistical tests were used to show how the biotech industry differs from the pharmaceutical industry. The two industries' characteristics were measured and compared, along with various measures of firms' financial risk and sensitivity to government regulation. Data from firms' financial statements provided accounting-based measures and firms' stock returns applied to a multifactor asset pricing model provided financial market measures. The biotech industry was by far the most research-intensive industry in the US, averaging 38% R&D intensity (ratio of R&D spending to total firm assets) over the past 25 years, compared with an average of 25% for the pharmaceutical industry and 3% for all other industries. Biotech firms exhibited lower and more volatile profits and higher market-related and size-related risk, and they suffered more negative stock returns in response to threatened government price regulation. Biotech firms' financial risks increase their costs of capital and make them more sensitive to government regulations that affect their financial prospects. As biotech products grow to represent a larger share of new medicines, general stock market conditions and government regulations could have a greater impact on the level of innovation of new medicines.
-
Comparative study of 2 oral care protocols in intensive care units.
Ory, Jérôme; Raybaud, Evelyne; Chabanne, Russell; Cosserant, Bernard; Faure, Jean Sébastien; Guérin, Renaud; Calvet, Laure; Pereira, Bruno; Mourgues, Charline; Guelon, Dominique; Traore, Ousmane
2017-03-01
The quality of oral care is important in limiting the emergence of ventilator-associated pneumonia (VAP) in intubated patients. Our main objective was to measure the quality improvement in oral care following the implementation of a new oral care protocol. We also monitored VAP rates. This was a cohort study of patients in 5 adult ICUs covering different specialties. During period 1, caregivers used a foam stick for oral care and during period 2 a stick and tooth brushing with aspiration. Oral chlorhexidine was used during both periods. The caregivers rated improvement in oral health on the basis of 4 criteria (tongue, mucous membranes, gingivae, and teeth). Caregiver satisfaction was also assessed. The incidence of VAP was monitored. A total of 2,030 intubated patients admitted to intensive care units benefited from oral care. The patient populations during the 2 periods were similar with regard to demographic data and VAP potential risk factors. Oral health was significantly better from the third day of oral care in period 2 onward (period 1, 6.4 ± 2.1; period 2, 5.6 ± 1.8; P = .043). Caregivers found the period 2 protocol easier to implement and more effective. VAP rates decreased significantly between the 2 periods (period 1, 12.8%; period 2, 8.5%; P = .002). Our study showed that the implementation of a simple strategy improved the quality of oral care of patients in intensive care units, and decreased VAP rates. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.
-
Towards designing energy-efficient routing protocol for wireless mesh networks
CSIR Research Space (South Africa)
Dludla, AG
2009-08-01
Full Text Available Different studies have proposed number of routing protocols to overcome data transmission challenges. Very few of these protocols consider node energy. In this study, the state of art work from various studies is reviewed and compared based...
-
Emission trading and Kyoto's protocol: discussions concerning rules and international coordination
International Nuclear Information System (INIS)
Baron, R.
2000-01-01
The Kyoto Protocol of the Climate Convention introduced the possibility to trade greenhouse gas emission reductions among industrialized countries, as a means to reduce the total cost of achieving the agreed emission goals. The rules for this international co-ordination regime are still debated, even if its principle is generally agreed. This article, written before the negotiation in the Hague, summarizes how the notion of emission trading made its way in the Framework Convention on Climate Change. The authors show what economic gains could realistically be expected from emission trading, based on macro-economic modelling results and a simulation of trading in the conditions of the Kyoto Protocol. They stress the critical contribution that emission trading could make, provided that the Protocol's environmental basis is not undermined. In the end, the negotiation collapsed over this issue. Beyond this near-term obstacle, the international emission trading system represents a significant progress towards an efficient resolution of man-made global climate change. (author)
-
International Nuclear Information System (INIS)
Igure, V. M.; Williams, R. D.
2006-01-01
Supervisory control and data acquisition (SCADA) networks have replaced discrete wiring for many industrial processes, and the efficiency of the network alternative suggests a trend toward more SCADA networks in the future. This paper broadly considers SCADA to include distributed control systems (DCS) and digital control systems. These networks offer many advantages, but they also introduce potential vulnerabilities that can be exploited by adversaries. Inter-connectivity exposes SCADA networks to many of the same threats that face the public internet and many of the established defenses therefore show promise if adapted to the SCADA differences. This paper provides an overview of security issues in SCADA networks and ongoing efforts to improve the security of these networks. Initially, a few samples from the range of threats to SCADA network security are offered. Next, attention is focused on security assessment of SCADA communication protocols. Three challenges must be addressed to strengthen SCADA networks. Access control mechanisms need to be introduced or strengthened, improvements are needed inside of the network to enhance security and network monitoring, and SCADA security management improvements and policies are needed. This paper discusses each of these challenges. This paper uses the Profibus protocol as an example to illustrate some of the vulnerabilities that arise within SCADA networks. The example Profibus security assessment establishes a network model and an attacker model before proceeding to a list of example attacks. (authors)
-
Bargaining issues in Europe: comparing countries and industries
van Klaveren, M.; Tijdens, K.
2008-01-01
What drives low pay in Europe? Who and what sectors are affected? Which workers work very long or very short hours and miss out on training opportunities? In this study, produced by the University of Amsterdam/AIAS, these are some of the questions posed for thirteen industries in nine EU member
-
Barros, Carlos Pestana; Santos, J.C. Gomes
2007-01-01
This paper compares the efficiency of cooperatives and private enterprises in the Portuguese wine industry, employing data envelopment analysis (DEA). The use of DEA for the analysis of comparative efficiency within a sector is a key tool in evaluating organizational competitiveness. Competitiveness should be based on benchmarking the different types of organizations that comprise the viniculture sector. We conclude that Portuguese wine cooperatives, on average, are more efficient than their ...
-
Katsioloudis, Petros; Jovanovic, Vukica; Jones, Mildred
2014-01-01
The main purpose of this study was to determine significant positive effects among the use of three different types of drafting models, and to identify whether any differences exist towards promotion of spatial visualization ability for students in Industrial Technology and Technology Education courses. In particular, the study compared the use of…
-
Directory of Open Access Journals (Sweden)
Yiğit Çakıroğlu
2013-09-01
Full Text Available Objective: To compare microdose GnRH agonist (MDL protocol with GnRH antagonist/letrazole (AL protocol in patients with poor ovarian response. Design: Randomised clinical trial. Setting: Kocaeli University Assisted Reproductive Centre Interventions: POR was diagnosed according to ESHRE Bologna criteria in case of presence of 2 out of 3 criteria. In the MDL group (n=27, 40µg/0.2 cc subcutaneous leuprolid acetate was given two times a day starting on the first day of menstrual cycle. On the second day of the cycle, gonadotrophin stimulation was started at 450-600 IU and/or 150 IU human menopausal gonadotrophin (hMG along with leuprolid. In the AL group (n=28, 5 mg letrazole was given for 5 days starting on the second day of the spontaneous cycle and after the 5th day of the cycle, 450-600 IU and/or 150 IU hMG was given. Main Outcome Measures: To compare the outcomes of MDL protocol with AL protocol in patients with poor ovarian response. Results: Stimulation days, total gonadotrophin dose (IU, peak E2 (pg/ml levels, and endometrial thickness were found to be statistically significantly lower in the AL group. While no cases of cycle cancellation was detected in the MDL group, statistically significantly higher rates of cycle cancellation (%35.7, p<0.001 was detected in the AL group. No statistically significant differences were detected in total oocyte numbers (3.7±2.9 vs 2.7±2.2, number of transferred embryos (1.4±0.5 vs 1.4±1.9, pregnancy rates (3/27 (%11.1 vs 2/28 (%7.1 and implantation rates (3/36 (%8.3 vs 2/22 (%9.1 in between the groups. Comment: Although AL protocol is not superior to MDL protocol in poor ovarian response patients, it may be used as an alternative protocol.
-
Turf Conversion Measurement and Verification Protocol
Energy Technology Data Exchange (ETDEWEB)
Kurnik, Charles W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Stoughton, Kate M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Figueroa, Jorge [Western Resource Advocates, Boulder, CO (United States)
2017-12-05
This measurement and verification (M and V) protocol provides procedures for energy service companies (ESCOs) and water efficiency service companies (WESCOs) to determine water savings as a result of water conservation measures (WCMs) in energy performance contracts associated with converting turfgrass or other water-intensive plantings to water-wise and sustainable landscapes. The water savings are determined by comparing the baseline water use to the water use after the WCM has been implemented. This protocol outlines the basic structure of the M and V plan, and details the procedures to use to determine water savings.
-
A Study of Shared-Memory Mutual Exclusion Protocols Using CADP
Mateescu, Radu; Serwe, Wendelin
Mutual exclusion protocols are an essential building block of concurrent systems: indeed, such a protocol is required whenever a shared resource has to be protected against concurrent non-atomic accesses. Hence, many variants of mutual exclusion protocols exist in the shared-memory setting, such as Peterson's or Dekker's well-known protocols. Although the functional correctness of these protocols has been studied extensively, relatively little attention has been paid to their non-functional aspects, such as their performance in the long run. In this paper, we report on experiments with the performance evaluation of mutual exclusion protocols using Interactive Markov Chains. Steady-state analysis provides an additional criterion for comparing protocols, which complements the verification of their functional properties. We also carefully re-examined the functional properties, whose accurate formulation as temporal logic formulas in the action-based setting turns out to be quite involved.
-
Energy-Aware RFID Anti-Collision Protocol.
Arjona, Laura; Simon, Hugo Landaluce; Ruiz, Asier Perallos
2018-06-11
The growing interest in mobile devices is transforming wireless identification technologies. Mobile and battery-powered Radio Frequency Identification (RFID) readers, such as hand readers and smart phones, are are becoming increasingly attractive. These RFID readers require energy-efficient anti-collision protocols to minimize the tag collisions and to expand the reader's battery life. Furthermore, there is an increasing interest in RFID sensor networks with a growing number of RFID sensor tags. Thus, RFID application developers must be mindful of tag anti-collision protocols. Energy-efficient protocols involve a low reader energy consumption per tag. This work presents a thorough study of the reader energy consumption per tag and analyzes the main factor that affects this metric: the frame size update strategy. Using the conclusion of this analysis, the anti-collision protocol Energy-Aware Slotted Aloha (EASA) is presented to decrease the energy consumption per tag. The frame size update strategy of EASA is configured to minimize the energy consumption per tag. As a result, EASA presents an energy-aware frame. The performance of the proposed protocol is evaluated and compared with several state of the art Aloha-based anti-collision protocols based on the current RFID standard. Simulation results show that EASA, with an average of 15 mJ consumed per tag identified, achieves a 6% average improvement in the energy consumption per tag in relation to the strategies of the comparison.
-
Extraction protocols for orthodontic treatment: A retrospective study
Directory of Open Access Journals (Sweden)
Vaishnevi N Thirunavukkarasu
2016-01-01
Full Text Available Background and Objectives: Various extraction protocols have been followed for successful orthodontic treatment. The purpose of this study was to evaluate the extraction protocols in patients who had previously undergone orthodontic treatment and also who had reported for continuing orthodontic treatment from other clinics. Materials and Methods: One hundred thirty eight patients who registered for orthodontic treatment at the Faculty of Dentistry were divided into 10 extraction protocols based on the Orthodontic treatment protocol given by Janson et al. and were evaluated for statistical significance. Results: The descriptive statistics of the study revealed a total of 40 (29% patients in protocol 1, 43 (31.2% in protocol 2, 18 (13% in protocol 3, 16 (11.6% in protocol 5, and 12 (8.7% in Type 3 category of protocol 9. The Type 3 category in protocol 9 was statistically significant compared to other studies. Midline shift and collapse of the arch form were noticed in these individuals. Conclusion: Extraction of permanent teeth such as canine and lateral incisors without rational reasons could have devastating consequences on the entire occlusion. The percentage of cases wherein extraction of permanent teeth in the crowded region was adopted as a treatment option instead of orthodontic treatment is still prevalent in dental practice. The shortage of orthodontists in Malaysia, the long waiting period, and lack of subjective need for orthodontic treatment at an earlier age group were the reasons for the patient's to choose extraction of the mal-aligned teeth such as the maxillary canine or maxillary lateral incisors.
-
Order Entry Protocols Are an Amenable Target for Workflow Automation.
Tudor, James; Klochko, Chad; Patel, Milind; Siegal, Daniel
2018-04-21
Order entry protocol selection of advanced imaging studies is labor-intensive, can disrupt workflow, and may displace staff from more valuable tasks. The aim of this study was to explore and compare the behaviors of radiologic technologists and radiologists when determining protocol to identify opportunities for workflow automation. A data set of over 273,000 cross-sectional examination orders from four hospitals within our health system was created. From this data set, we isolated the 12 most frequently requested examinations, which represent almost 50% of the entirety of advanced imaging volume. Intergroup comparisons were made between behavior of radiologic technologists and radiologists or residents when determining protocol. Frequencies of changes were calculated. Common parameters of changed examinations were identified. The overall change rate for both radiologists and residents (4%) is very low and comparable to the overall change rate of radiologic technologists (1%). The change rates for the 12 most ordered examinations were calculated and compared individually. Most examinations that underwent change involved a patient with a low estimated glomerular filtration rate, a patient with a contrast allergy, or a provider ordering a general examination but in fact wanting an organ-specific protocol or an angiographic study. Order entry protocol selection of the most frequently ordered advanced imaging examinations was rarely a value-added activity because these examinations are rarely changed. Changes follow predictable patterns that make order entry protocol selection of most radiology orders for advanced imaging amenable to workflow automation. Copyright © 2018 American College of Radiology. Published by Elsevier Inc. All rights reserved.
-
Past, present, and future industrial biotechnology in China.
Li, Zhenjiang; Ji, Xiaojun; Kan, Suli; Qiao, Hongqun; Jiang, Min; Lu, Dingqiang; Wang, Jun; Huang, He; Jia, Honghua; Ouyuang, Pingkai; Ying, Hanjie
2010-01-01
Fossil resources, i.e. concentrated carbon from biomass, have been irrecoverably exhausted through modern industrial civilization in the last two hundred years. Serious consequences including crises in resources, environment and energy, as well as the pressing need for direct and indirect exploitation of solar energy, pose challenges to the science and technology community of today. Bioenergy, bulk chemicals, and biomaterials could be produced from renewable biomass in a biorefinery via biocatalysis. These sustainable industries will match the global mass cycle, creating a new form of civilization with new industries and agriculture driven by solar energy. Industrial biotechnology is the dynamo of a bioeconomy, leading to a new protocol for production of energy, bulk chemicals, and materials. This new mode of innovation will place the industry at center stage supported by universities and research institutes. Creativity in industrial biotechnology will be promoted and China will successfully follow the road to green modernization. China's rapid economic development and its traditional capacity in fermentation will place it in an advantageous position in the industrial biotechnology revolution. The development and current status of industrial biotechnology in China are summarized herein.
-
GnRH antagonist versus long agonist protocols in IVF
DEFF Research Database (Denmark)
Lambalk, C B; Banga, F R; Huirne, J A
2017-01-01
BACKGROUND: Most reviews of IVF ovarian stimulation protocols have insufficiently accounted for various patient populations, such as ovulatory women, women with polycystic ovary syndrome (PCOS) or women with poor ovarian response, and have included studies in which the agonist or antagonist...... was not the only variable between the compared study arms. OBJECTIVE AND RATIONALE: The aim of the current study was to compare GnRH antagonist protocols versus standard long agonist protocols in couples undergoing IVF or ICSI, while accounting for various patient populations and treatment schedules. SEARCH...... in couples undergoing IVF or ICSI. The primary outcome was ongoing pregnancy rate. Secondary outcomes were: live birth rate, clinical pregnancy rate, number of oocytes retrieved and safety with regard to ovarian hyperstimulation syndrome (OHSS). Separate comparisons were performed for the general IVF...
-
Barik, Mayadhar; Bajpai, Minu; Patnaik, Santosh; Mishra, Pravash; Behera, Priyamadhaba; Dwivedi, Sada Nanda
2016-01-01
Cryopreservation is basically related to meritorious thin samples or small clumps of cells that are cooled quickly without loss. Our main objective is to establish and formulate an innovative method and protocol development for cryopreservation as a gold standard for clinical uses in laboratory practice and treatment. The knowledge regarding usefulness of cryopreservation in clinical practice is essential to carry forward the clinical practice and research. We are trying to compare different methods of cryopreservation (in two dozen of cells) at the same time we compare the embryo and oocyte freezing interms of fertilization rate according to the International standard protocol. The combination of cryoprotectants and regimes of rapid cooling and rinsing during warming often allows successful cryopreservation of biological materials, particularly cell suspensions or thin tissue samples. Examples include semen, blood, tissue samples like tumors, histological cross-sections, human eggs and human embryos. Although presently many studies have reported that the children born from frozen embryos or "frosties," show consistently positive results with no increase in birth defects or development abnormalities is quite good enough and similar to our study (50-85%). We ensure that cryopreservation technology provided useful cell survivability, tissue and organ preservation in a proper way. Although it varies according to different laboratory conditions, it is certainly beneficial for patient's treatment and research. Further studies are needed for standardization and development of new protocol.
-
Energy-efficient cooperative protocols for full-duplex relay channels
Khafagy, Mohammad Galal
2013-12-01
In this work, energy-efficient cooperative protocols are studied for full-duplex relaying (FDR) with loopback interference. In these protocols, relay assistance is only sought under certain conditions on the different link outages to ensure effective cooperation. Recently, an energy-efficient selective decode-And-forward protocol was proposed for FDR, and was shown to outperform existing schemes in terms of outage. Here, we propose an incremental selective decode-And-forward protocol that offers additional power savings, while keeping the same outage performance. We compare the performance of the two protocols in terms of the end-to-end signal-to-noise ratio cumulative distribution function via closed-form expressions. Finally, we corroborate our theoretical results with simulation, and show the relative relay power savings in comparison to non-selective cooperation in which the relay cooperates regardless of channel conditions. © 2013 IEEE.
-
Energy-efficient cooperative protocols for full-duplex relay channels
Khafagy, Mohammad Galal; Ismail, Amr; Alouini, Mohamed-Slim; Aï ssa, Sonia
2013-01-01
In this work, energy-efficient cooperative protocols are studied for full-duplex relaying (FDR) with loopback interference. In these protocols, relay assistance is only sought under certain conditions on the different link outages to ensure effective cooperation. Recently, an energy-efficient selective decode-And-forward protocol was proposed for FDR, and was shown to outperform existing schemes in terms of outage. Here, we propose an incremental selective decode-And-forward protocol that offers additional power savings, while keeping the same outage performance. We compare the performance of the two protocols in terms of the end-to-end signal-to-noise ratio cumulative distribution function via closed-form expressions. Finally, we corroborate our theoretical results with simulation, and show the relative relay power savings in comparison to non-selective cooperation in which the relay cooperates regardless of channel conditions. © 2013 IEEE.
-
Implantable Body Sensor Network MAC Protocols Using Wake-up Radio – Evaluation in Animal Tissue
Karuppiah Ramachandran, Vignesh Raja; van der Zwaag, B.J.; Meratnia, Nirvana; Havinga, Paul J.M.
Applications of implantable sensor networks in the health-care industry have increased tremendously over the last decade. There are different types of medium access control (MAC) protocols that are designed for implantable body sensor networks, using different physical layer technologies such as
-
Comparative analysis of lockout programs and procedures applied to industrial machines
Energy Technology Data Exchange (ETDEWEB)
Chinniah, Y.; Champoux, M.; Burlet-Vienney, D.; Daigle, R. [Institut de recherche Robert-Sauve en sante et en securite du travail, Montreal, PQ (Canada)
2008-09-15
In 2005, approximately 20 workers in Quebec were killed by dangerous machines. Approximately 13,000 accidents in the province were linked to the use of machines. The resulting cost associated with these accidents was estimated to be $70 million to the Quebec Occupational Health and Safety Commission (CSST) in compensation and salary replacement. According to article 185 of the Quebec Occupational Health and Safety Regulation (RSST), workers intervening in hazardous zones of machines and processes during maintenance, repairs, and unjamming activities must apply lockout procedures. Lockout is defined as the placement of a lock or tag on an energy-isolating device in accordance with an established procedure, indicating that the energy-isolating device is not to be operated until removal of the lock or tag in accordance with an established procedure. This report presented a comparative analysis of lockout programs and procedures applied to industrial machines. The study attempted to answer several questions regarding the concept of lockout and its definition in the literature; the differences between legal lockout requirements among provinces and countries; different standards on lockout; the contents of lockout programs as described by different documents; and the compliance of lockout programs in a sample of industries in Quebec in terms of Canadian standard on lockout, the CSA Z460-05 (2005). The report discussed the research objectives, methodology, and results of the study. It was concluded that the concept of lockout has different meanings or definitions in the literature, especially in regulations. However, definitions of lockout which are found in standards have certain similarities. 50 refs., 52 tabs., 2 appendices.
-
Protocol: Entrepreneurship in the area of Marketing. Comparing PBL vs active lectures
Directory of Open Access Journals (Sweden)
Virginia Rincón Diez
2017-06-01
Full Text Available This protocol presents a research process which aims to analyze the impact of an active learning model on entrepreneurship of university students of Marketing. First, a learning model is proposed which allows to jointly conducting the content of different subjects and which provides an integrated vision of Marketing. Subsequently, the concept of entrepreneurship is defined and a measuring instrument is mentioned. Through this instrument the information needed to analyze to what extent the new learning model promotes students’ entrepreneurship is gathered. Finally, several possibilities to perform the data analysis are presented.
-
A novel cognitive palatability assessment protocol for dogs.
Araujo, J A; Milgram, N W
2004-07-01
Assessment of canine palatability is important for both the pet food and pharmaceutical industries; however, the current palatability assessment protocols are limited in their utility. The most common technique, the two-pan test, does not control for the satiating effects of food and may not be useful for long-term palatability analysis because nutritional or caloric characteristics of the diets may interfere with the results. Furthermore, the large quantities of foods consumed may be detrimental to the health of animals that do not self-limit their food intake. The purpose of this study was to determine whether a cognitive protocol could be used to determine food palatability in dogs. Five beagle dogs were trained on a three-choice object-discrimination learning task. After establishing object preferences, the preferred object was associated with no reward, a second object was associated with the dog's normal laboratory diet (Purina Agribrands Canine Lab Chow No. 5006; Agribrands Purina Canada, Inc., Woodstock, ON, Canada), and the third object was associated with a commercial (Hill's P/D; Hill's Pet Nutrition Inc., Topeka, KS) diet. In the discrimination-training phase, dogs were trained until they learned to avoid the no-reward object. They were subsequently given an additional 20 test sessions, which were used to determine food preference. In the reversal phase, which involved reversal learning, the object-food associations were modified, such that the object that was previously associated with Hill's P/D diet was now associated with the normal laboratory diet and vice versa. Once the dogs learned to avoid the no-reward object, they were tested for an additional 20 sessions. All subjects learned to avoid the no-reward object during the initial learning, and the number of choices to the object associated with the Hill's P/D diet was greater than the number of choices to the objects associated with the dry laboratory diet (P food-choice associations were reversed
-
Controlled Delegation Protocol in Mobile RFID Networks
Directory of Open Access Journals (Sweden)
Yang MingHour
2010-01-01
Full Text Available To achieve off-line delegation for mobile readers, we propose a delegation protocol for mobile RFID allowing its readers access to specific tags through back-end server. That is to say, reader-tag mutual authentication can be performed without readers being connected to back-end server. Readers are also allowed off-line access to tags' data. Compared with other delegation protocols, our scheme uniquely enables back-end server to limit each reader's reading times during delegation. Even in a multireader situation, our protocol can limit reading times and reading time periods for each of them and therefore makes back-end server's delegation more flexible. Besides, our protocol can prevent authorized readers from transferring their authority to the unauthorized, declining invalid access to tags. Our scheme is proved viable and secure with GNY logic; it is against certain security threats, such as replay attacks, denial of service (DoS attacks, Man-in-the-Middle attacks, counterfeit tags, and breaches of location and data privacy. Also, the performance analysis of our protocol proves that current tags can afford the computation load required in this scheme.
-
Bayindir, Ramazan; Cetinceviz, Yucel
2011-04-01
This paper describes a water pumping control system that is designed for production plants and implemented in an experimental setup in a laboratory. These plants contain harsh environments in which chemicals, vibrations or moving parts exist that could potentially damage the cabling or wires that are part of the control system. Furthermore, the data has to be transferred over paths that are accessible to the public. The control systems that it uses are a programmable logic controller (PLC) and industrial wireless local area network (IWLAN) technologies. It is implemented by a PLC, an communication processor (CP), two IWLAN modules, and a distributed input/output (I/O) module, as well as the water pump and sensors. Our system communication is based on an Industrial Ethernet and uses the standard Transport Control Protocol/Internet Protocol for parameterisation, configuration and diagnostics. The main function of the PLC is to send a digital signal to the water pump to turn it on or off, based on the tank level, using a pressure transmitter and inputs from limit switches that indicate the level of the water in the tank. This paper aims to provide a convenient solution in process plants where cabling is not possible. It also has lower installation and maintenance cost, provides reliable operation, and robust and flexible construction, suitable for industrial applications. Copyright © 2010 ISA. Published by Elsevier Ltd. All rights reserved.
-
International Nuclear Information System (INIS)
Rodriquez-Grau, J.
1993-01-01
The present status of the toxicity assessment of industrial products in Latin America is well below North America/EC standards. As an example, most of Latin America regulatory laws regarding effluent discharge are still based upon concentration limits of certain major pollutants, and BOD/COD measurements; no reference is made to the necessity of aquatic bioassay toxicity data. Aware of this imperative need, the Venezuelan Petroleum Industry (PDVSA), through its R ampersand D Corporative branch (INTEVEP) gave priority to the development of standardized acute/sublethal toxicity test protocols as sound means of evaluating their products and wastes. Throughout this presentation, the Venezuelan case will be studied, showing strategies undertaken to accelerate protocol development. Results will show the assessment of 14 different protocols encompassing a variety of species of aquatic/terrestrial organisms, and a series of toxicity test endpoints including mortality, reproductive, biological and immunological measurements, most of which are currently in use or being developed. These protocols have already yielded useful results in numerous cases where toxicity assessment was required, including evaluations of effluent, oil dispersants, drilling fluids, toxic wastes, fossil fuels and newly developed products. The Venezuelan case demonstrates that the integration of Industry, Academia and Government, which is an essential part of SETAC's philosophy, is absolutely necessary for the successful advancement of environmental scientific/regulatory issues
-
Vallurupalli, Srikanth; Kasula, Srikanth; Kumar Agarwal, Shiv; Pothineni, Naga Venkata K; Abualsuod, Amjad; Hakeem, Abdul; Ahmed, Zubair; Uretsky, Barry F
2017-08-01
High-pressure inflation for coronary stent deployment is universally performed. However, the duration of inflation is variable and does not take into account differences in lesion compliance. We developed a standardized "pressure optimization protocol" (POP) using inflation pressure stability rather than an arbitrary inflation time or angiographic balloon appearance for stent deployment. Whether this approach improves long-term outcomes is unknown. 792 patients who underwent PCI using either rapid inflation/deflation (n = 376) or POP (n = 416) between January 2009 and March 2014 were included. Exclusion criteria included PCI for acute myocardial infarction, in-stent restenosis, chronic total occlusion, left main, and saphenous vein graft lesions. Primary endpoint was target vessel failure [TVF = combined end point of target vessel revascularization (TVR), myocardial infarction, and cardiac death]. Outcomes were analyzed in the entire cohort and in a propensity analysis. Stent implantation using POP with a median follow-up of 1317 days was associated with lower TVF compared with rapid inflation/deflation (10.1 vs. 17.8%, P inflation/deflation (10 vs. 18%, P < 0.0001). Stent deployment using POP led to reduced TVF compared to rapid I/D. These results recommend this method to improve long-term outcomes. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.
-
Effects of a Short Drilling Implant Protocol on Osteotomy Site Temperature and Drill Torque.
Mihali, Sorin G; Canjau, Silvana; Cernescu, Anghel; Bortun, Cristina M; Wang, Hom-Lay; Bratu, Emanuel
2018-02-01
To establish a protocol for reducing the drilling sequence during implant site preparation based on temperature and insertion torque. The traditional conventional drilling sequence (used several drills with 0.6-mm increment each time) was compared with the proposed short drilling protocol (only used 2 drills: initial and final drill). One hundred drilling osteotomies were performed in bovine and porcine bones. Sets of 2 osteotomy sites were created in 5 bone densities using 2 types of drilling protocols. Thermographic pictures were captured throughout all drilling procedures and analyzed using ThermaCAM Researcher Professional 2.10. Torque values were determined during drilling by measuring electrical input and drill speed. There were statistically significant differences in bone temperature between the conventional and short drilling protocols during implant site preparation (analysis of variance P = 0.0008). However, there were no significant differences between the 2 types of drilling protocols for both implant diameters. Implant site preparation time was significantly reduced when using the short drilling protocol compared with the conventional drilling protocol (P drilling protocol proposed herein may represent a safe approach for implant site preparation.
-
Ad hoc mobile wireless networks principles, protocols and applications
Sarkar, Subir Kumar; Puttamadappa, C
2007-01-01
Ad hoc mobile wireless networks have seen increased adaptation in a variety of disciplines because they can be deployed with simple infrastructures and virtually no central administration. In particular, the development of ad hoc wireless and sensor networks provides tremendous opportunities in areas including disaster recovery, defense, health care, and industrial environments. Ad Hoc Mobile Wireless Networks: Principles, Protocols and Applications explains the concepts, mechanisms, design, and performance of these systems. It presents in-depth explanations of the latest wireless technologies
-
A Weak Value Based QKD Protocol Robust Against Detector Attacks
Troupe, James
2015-03-01
We propose a variation of the BB84 quantum key distribution protocol that utilizes the properties of weak values to insure the validity of the quantum bit error rate estimates used to detect an eavesdropper. The protocol is shown theoretically to be secure against recently demonstrated attacks utilizing detector blinding and control and should also be robust against all detector based hacking. Importantly, the new protocol promises to achieve this additional security without negatively impacting the secure key generation rate as compared to that originally promised by the standard BB84 scheme. Implementation of the weak measurements needed by the protocol should be very feasible using standard quantum optical techniques.
-
Geppert, M
2003-01-01
This article compares sensemaking processes in multinational corporations (MNCs) situated in the same industrial sector. Our comparative analysis of three MNCs and their subsidiaries in Germany and the United Kingdom aims to shed light on the contextual dimension (institutions, culture, and politics) of the sensemaking process. First, I discuss ideologies related to the discourse about global restructuring of manufacturing. Second, I compare similarities and differences in vocabularies of the...
-
Identifying the comparative advantage of products and industries of ...
African Journals Online (AJOL)
(as in the H-O theory) and that industries utilise different factor proportions ... theorem and the self-selection hypothesis are important stylised facts of firm- ...... RCAs are highly concentrated are labour intensive, and this provides verification of.
-
A Priority-Based Adaptive MAC Protocol for Wireless Body Area Networks
Directory of Open Access Journals (Sweden)
Sabin Bhandari
2016-03-01
Full Text Available In wireless body area networks (WBANs, various sensors and actuators are placed on/inside the human body and connected wirelessly. WBANs have specific requirements for healthcare and medical applications, hence, standard protocols like the IEEE 802.15.4 cannot fulfill all the requirements. Consequently, many medium access control (MAC protocols, mostly derived from the IEEE 802.15.4 superframe structure, have been studied. Nevertheless, they do not support a differentiated quality of service (QoS for the various forms of traffic coexisting in a WBAN. In particular, a QoS-aware MAC protocol is essential for WBANs operating in the unlicensed Industrial, Scientific, and Medical (ISM bands, because different wireless services like Bluetooth, WiFi, and Zigbee may coexist there and cause severe interference. In this paper, we propose a priority-based adaptive MAC (PA-MAC protocol for WBANs in unlicensed bands, which allocates time slots dynamically, based on the traffic priority. Further, multiple channels are effectively utilized to reduce access delays in a WBAN, in the presence of coexisting systems. Our performance evaluation results show that the proposed PA-MAC outperforms the IEEE 802.15.4 MAC and the conventional priority-based MAC in terms of the average transmission time, throughput, energy consumption, and data collision ratio.
-
A Priority-Based Adaptive MAC Protocol for Wireless Body Area Networks.
Bhandari, Sabin; Moh, Sangman
2016-03-18
In wireless body area networks (WBANs), various sensors and actuators are placed on/inside the human body and connected wirelessly. WBANs have specific requirements for healthcare and medical applications, hence, standard protocols like the IEEE 802.15.4 cannot fulfill all the requirements. Consequently, many medium access control (MAC) protocols, mostly derived from the IEEE 802.15.4 superframe structure, have been studied. Nevertheless, they do not support a differentiated quality of service (QoS) for the various forms of traffic coexisting in a WBAN. In particular, a QoS-aware MAC protocol is essential for WBANs operating in the unlicensed Industrial, Scientific, and Medical (ISM) bands, because different wireless services like Bluetooth, WiFi, and Zigbee may coexist there and cause severe interference. In this paper, we propose a priority-based adaptive MAC (PA-MAC) protocol for WBANs in unlicensed bands, which allocates time slots dynamically, based on the traffic priority. Further, multiple channels are effectively utilized to reduce access delays in a WBAN, in the presence of coexisting systems. Our performance evaluation results show that the proposed PA-MAC outperforms the IEEE 802.15.4 MAC and the conventional priority-based MAC in terms of the average transmission time, throughput, energy consumption, and data collision ratio.
-
Application of low-dose radiation protocols in survey CT scans
International Nuclear Information System (INIS)
Fu Qiang; Liu Ting; Lu Tao; Xu Ke; Zhang Lin
2009-01-01
Objective: To characterize the protocols with low-dose radiation in survey CT scans for localization. Methods: Eighty standard adult patients, head and body phantoms were recruited. Default protocols provided by operator's manual setting were that all the tube voltage for head, chest, abdomen and lumbar was 120 kV; the tube currents were 20,10,20 and 40 mA, respectively. Values of kV and mA in the low-dose experiments were optimized according to the device options. For chest and abdomen, the tube position were compared between default (0 degree) and 180 degree. Phantoms were scanned with above protocols, and the radiation doses were measured respectively. Paired t-test were used for comparisons of standard deviation in CT value, noise and exposure surface dose (ESD) between group with default protocols and group with optimized protocols. Results: The optimized protocols in low-dose CT survey scans were 80 kV, 10 mA for head, 80 kV, 10 mA for chest, 80 kV, 10 mA for abdomen and 100 kV, 10 mA for lumbar. The values of ESD for phantom scan in default and optimized protocols were 0.38 mGy/0.16 mGy in head, 0.30 mGy/0.20 mGy in chest, 0.74 mGy/0.30 mGy in abdomen and 0.81 mGy/0.44 mGy in lumbar, respectively. Compared with default protocols, the optimized protocols reduced the radiation doses 59%, 33%, 59% and 46% in head, chest, abdomen and lumbar. When tube position changed from 0 degree to 180 degree, the ESD were 0.24 mGy/0.20 mGy for chest; 0.37 mGy/0.30 mGy for abdomen, and the radiation doses were reduced 20% and 17%. Conclusion: A certain amount of image noise is increased in low-dose protocols, but image quality is still acceptable without problem in CT localization. The reduction of radiation dose and the radiation harm to patients are the superiority. (authors)
-
Improvement of burn pain management through routine pain monitoring and pain management protocol.
Yang, Hyeong Tae; Hur, Giyeun; Kwak, In-Suk; Yim, Haejun; Cho, Yong Suk; Kim, Dohern; Hur, Jun; Kim, Jong Hyun; Lee, Boung Chul; Seo, Cheong Hoon; Chun, Wook
2013-06-01
Pain management is an important aspect of burn management. We developed a routine pain monitoring system and pain management protocol for burn patients. The purpose of this study is to evaluate the effectiveness of our new pain management system. From May 2011 to November 2011, the prospective study was performed with 107 burn patients. We performed control group (n=58) data analysis and then developed the pain management protocol and monitoring system. Next, we applied our protocol to patients and performed protocol group (n=49) data analysis, and compared this to control group data. Data analysis was performed using the Numeric Rating Scale (NRS) of background pain and procedural pain, Clinician-Administered PTSD Scale (CAPS), Hamilton Depression Rating Scale (HDRS), State-Trait Anxiety Inventory Scale (STAIS), and Holmes and Rahe Stress Scale (HRSS). The NRS of background pain for the protocol group was significantly decreased compared to the control group (2.8±2.0 versus 3.9±1.9), and the NRS of procedural pain of the protocol group was significantly decreased compared to the control group (4.8±2.8 versus 3.7±2.5). CAPS and HDRS were decreased in the protocol group, but did not have statistical significance. STAIS and HRSS were decreased in the protocol group, but only the STAIS had statistical significance. Our new pain management system was effective in burn pain management. However, adequate pain management can only be accomplished by a continuous and thorough effort. Therefore, pain control protocol and pain monitoring systems need to be under constant revision and improvement using creative ideas and approaches. Copyright © 2012 Elsevier Ltd and ISBI. All rights reserved.
-
Performance analysis of routing protocols for IoT
Manda, Sridhar; Nalini, N.
2018-04-01
Internet of Things (IoT) is an arrangement of advancements that are between disciplinary. It is utilized to have compelling combination of both physical and computerized things. With IoT physical things can have personal virtual identities and participate in distributed computing. Realization of IoT needs the usage of sensors based on the sector for which IoT is integrated. For instance, in healthcare domain, IoT needs to have integration with wearable sensors used by patients. As sensor devices produce huge amount of data, often called big data, there should be efficient routing protocols in place. To the extent remote systems is worried there are some current protocols, for example, OLSR, DSR and AODV. It additionally tosses light into Trust based routing protocol for low-power and lossy systems (TRPL) for IoT. These are broadly utilized remote directing protocols. As IoT is developing round the corner, it is basic to investigate routing protocols that and evaluate their execution regarding throughput, end to end delay, and directing overhead. The execution experiences can help in settling on very much educated choices while incorporating remote systems with IoT. In this paper, we analyzed different routing protocols and their performance is compared. It is found that AODV showed better performance than other routing protocols aforementioned.
-
Energy Technology Data Exchange (ETDEWEB)
Jeong, Hyo Eun; Cho, Pyong Kon [Dept. of of Radiological Science, Catholic University of Daegu. Daegu (Korea, Republic of)
2016-09-15
As the tertiary industry is being developed, many problems are introduced in an industrial area in Korea. This study aims to investigate the residents' health conditions, such as the prevalence of metabolic syndrome and fatty liver diagnosed by ultrasonography, comparing the urban with the industrial areas. The subjects were 378 adults in the urban area and 376 adults in the industrial area. Subject variables accounted for were gender, age, drinking habits, smoking habits, physical activities, waist circumferences and BMI. In blood tests, fasting blood glucose, triglyceride, HDL, blood pressures, total cholesterol, AST, ALT and GGT were examined. Also, the presence and absence of fatty liver, diagnosed using ultrasonography, was investigated. As a result, the prevalence of metabolic syndrome were 43.7% in the urban area and 51.6% in the industrial area, hence it was significantly higher in the industrial area than in the urban area. Fasting blood glucose, triglyceride and waist circumference in the distribution of the individual components were 47.4, 53.7, and 16.1% in the urban area and 54.5, 61.5, and 22.9% in the industrial area respectively, so it was substantially higher in the industrial area than in the urban area. On the other hand, HDL, diastolic blood pressure, and fatty liver were 25.7, 43.4, and 44.7% in the urban area and 21.3, 19.9, and 36.7% in the industrial area respectively and thus it was much higher in the urban area than in the industrial area. In conclusion, this study shows that there were significant differences between the residents' health condition, comparing the urban area to the industrial area. Therefore, the precaution and aggressive management of metabolic syndrome may be necessary, in accordance with the characteristics of the industrial zone.
-
International Nuclear Information System (INIS)
Jeong, Hyo Eun; Cho, Pyong Kon
2016-01-01
As the tertiary industry is being developed, many problems are introduced in an industrial area in Korea. This study aims to investigate the residents' health conditions, such as the prevalence of metabolic syndrome and fatty liver diagnosed by ultrasonography, comparing the urban with the industrial areas. The subjects were 378 adults in the urban area and 376 adults in the industrial area. Subject variables accounted for were gender, age, drinking habits, smoking habits, physical activities, waist circumferences and BMI. In blood tests, fasting blood glucose, triglyceride, HDL, blood pressures, total cholesterol, AST, ALT and GGT were examined. Also, the presence and absence of fatty liver, diagnosed using ultrasonography, was investigated. As a result, the prevalence of metabolic syndrome were 43.7% in the urban area and 51.6% in the industrial area, hence it was significantly higher in the industrial area than in the urban area. Fasting blood glucose, triglyceride and waist circumference in the distribution of the individual components were 47.4, 53.7, and 16.1% in the urban area and 54.5, 61.5, and 22.9% in the industrial area respectively, so it was substantially higher in the industrial area than in the urban area. On the other hand, HDL, diastolic blood pressure, and fatty liver were 25.7, 43.4, and 44.7% in the urban area and 21.3, 19.9, and 36.7% in the industrial area respectively and thus it was much higher in the urban area than in the industrial area. In conclusion, this study shows that there were significant differences between the residents' health condition, comparing the urban area to the industrial area. Therefore, the precaution and aggressive management of metabolic syndrome may be necessary, in accordance with the characteristics of the industrial zone
-
Jadhav, J. R.; Mantha, S. S.; Rane, S. B.
2015-06-01
The demands for automobiles increased drastically in last two and half decades in India. Many global automobile manufacturers and Tier-1 suppliers have already set up research, development and manufacturing facilities in India. The Indian automotive component industry started implementing Lean practices to fulfill the demand of these customers. United Nations Industrial Development Organization (UNIDO) has taken proactive approach in association with Automotive Component Manufacturers Association of India (ACMA) and the Government of India to assist Indian SMEs in various clusters since 1999 to make them globally competitive. The primary objectives of this research are to study the UNIDO-ACMA Model as well as ISM Model of Lean implementation and validate the ISM Model by comparing with UNIDO-ACMA Model. It also aims at presenting a roadmap for Lean implementation in Indian automotive component industry. This paper is based on secondary data which include the research articles, web articles, doctoral thesis, survey reports and books on automotive industry in the field of Lean, JIT and ISM. ISM Model for Lean practice bundles was developed by authors in consultation with Lean practitioners. The UNIDO-ACMA Model has six stages whereas ISM Model has eight phases for Lean implementation. The ISM-based Lean implementation model is validated through high degree of similarity with UNIDO-ACMA Model. The major contribution of this paper is the proposed ISM Model for sustainable Lean implementation. The ISM-based Lean implementation framework presents greater insight of implementation process at more microlevel as compared to UNIDO-ACMA Model.
-
International Nuclear Information System (INIS)
1986-06-01
This report documents a review of the status of maintenance programs and practices in the US commercial nuclear power industry. The purpose of this review is to establish a baselines reference for evaluating the effectiveness of future industry activities in maintenance. Two methods used to collect progammatic data. First, a Maintenance Review Protocol was used during site visits to eight selected power plants to collect in-depth maintenance program information. Second, a Maintenance Questionnaire was filled out by NRC Resident Inspectors regarding maintenance programs at their plant. The protocol and questionnaire contained items regarding five broad categories of maintenance: (1) organization and administration, (2) facilities and equipment, (3) procedures, (4) personnel, and (5) work control. The study found that there is wide variability in industry maintenance programs. However, the industry is currently undergoing changes in maintenance practices, and adherence to INPO and NUMARC guidance in maintenance may bring about more systematically developed program practices
-
Directory of Open Access Journals (Sweden)
Gang Du
2015-06-01
Full Text Available Electricity intensity is an important indicator for measuring production efficiency. A comparative study could offer a new perspective on investigating determinants of electricity demand. The Japanese non-metallic mineral products industry is chosen as the object for comparison considering its representative position in production efficiency. By adopting the cointegration model, this paper examines influencing factors of electricity demand in Japanese and Chinese non-metallic mineral products industries under the same framework. Results indicate that although economic growth and industrial development stages are different between the two countries, major factors that affect the sectoral energy consumption are the same. Specifically, economic growth and industrial activity contribute to the growth of sectoral electricity consumption, while R&D intensity, per capita productivity and electricity price are contributors to the decline of sectoral electricity consumption. Finally, in order to further investigate the development trend of sectoral electricity demand, future electricity consumption and conservation potential are predicted under different scenarios. Electricity demand of the Chinese non-metallic mineral products industry is predicted to be 680.53 TWh (terawatt-hours in 2020 and the sectoral electricity conservation potentials are estimated to be 118.26 TWh and 216.25 TWh under the moderate and advanced electricity-saving scenarios, respectively.
-
Purohit, Abhilash; Satapathy, Alok
2018-03-01
In the field of composite research, use of industrial wastes such as slag and sludge particles as filler in wear resistant polymer composites has not been very common. Owing to the very high cost of conventional filler materials in polymer composites, exploring the possibility of using low cost minerals and industrial wastes for this purpose has become the need of the hour. In this context this work explores the possibility of such polymer composites filled with low cost industrial wastes and presents a comparison of mechanical characteristics among three types of epoxy based composites filled with Linz - Donawitz sludge (LD sludge), blast furnace slag (BF slag) and Linz - Donawitz slag (LD slag) respectively. A comparative study in regard to their solid particle erosion wear characteristics under similar test conditions is also included. Composites with different weight proportions (0, 5, 10, 15 and 20 wt. %) of LD sludge are fabricated by solution casting technique. Mechanical properties such as micro- hardness, tensile strength and flexural strength of three types of composites have been evaluated as per ASTM test standards and solid particle erosion wear test is performed following a design of experiment approach based on Taguchi’s orthogonal array. Five control factors (impact velocity, erodent size, filler content, impingement angle and erodent temperature) each at five levels are considered to conduct erosion wear tests. The test results for epoxy-LD sludge composites are compared with those of epoxy-BF slag and epoxy-LD slag composites reported by previous investigators. The comparison reveals that epoxy filled with LD sludge exhibits superior mechanical and erosion wear characteristics among the three types of composites considered in this study. This work also opens up a new avenue for value added utilization of an abundant industrial waste in the making of epoxy based functional composites.
-
Comparison of Different Double Immunostaining Protocols for Paraffin Embedded Liver Tissue
Directory of Open Access Journals (Sweden)
Alexander Schütz
1999-01-01
Full Text Available Most of the double immunostaining protocols that have been introduced so far have been developed for application on fresh frozen material or based on different species antibodies. In liver tissue, general problems of double immunostaining techniques are further complicated by tissue‐specific difficulties, such as necrosis or high intracellular protein content. To assess a reliable double immunostaining protocol for archived, paraffin embedded liver tissue, different protocols based on the use of same species primary antibodies were evaluated in terms of sensitivity, specificity and non‐specific background staining in pathological liver specimens. We compared peroxidase–anti‐peroxidase, alkaline phosphatase–anti‐alkaline phosphatase (PAP/APAP, labelled‐avidin–biotin (LAB/LAB and digoxigenin–anti‐digoxigenin (dig–a‐dig/PAP techniques using different cytokeratin antibodies and an antibody against PCNA. Comparison of the double immunostaining techniques revealed a high sensitivity and specificity in all procedures. Sections, which were stained employing PAP/APAP‐technique, displayed a higher background staining compared to sections which were treated with the LAB/LAB or dig–a‐dig/PAP protocol. In contrast to the dig–a‐dig/PAP protocol, the LAB/LAB technique provides a better time/cost relationship. Therefore, we would like to recommend a modified LAB/LAB protocol for simultaneous detection of different antigens in archived liver tissue.
-
I-123 IBZM-SPECT: improved acquisition protocol with HR-collimator
International Nuclear Information System (INIS)
Sandrock, D.; Ivancevic, V.; Dopichaj-Menge, U.; Gruber, D.; Munz, D.
2002-01-01
Aim: Aim of this study was to evaluate the impact of different acquisition and reconstruction protocols on the quality of SPECT diagnostics with I-123 IBZM in patients with diseases of the dopaminergic system. Material and Methods: Overall, 30 patients (19 men, 11 women, aged 22 - 80 years) were studied with SPECT after i.v. injection of 5 mCi (185 MBq) I-123 IBZM. Acquisition was performed 60 min p.i. (protocol A) using a medium energy collimator, a 64 x 64 matrix, 64 projections, step and shoot technique, 5.6 0 and 20 seconds per step with a MultiSPECT2 double-head gamma camera (Siemens). Immediately afterwards, a second acquisition (protocol B, 90 min p.i.) using a high resolution collimator, a 128 x 128 matrix, 60 projections, step and shoot technique, 3 0 and 30 seconds per step was performed. The reconstruction was done in filtered backprojection technique and a Butterworth filter of order 7, in protocol A using a cutoff of 0.5 and in protocol B of 0.4. Finally, the net count ratios of the basal ganglia to the frontal lobe(s) were calculated and compared with the clinical diagnosis. Results: The visual analysis yielded - as expected -a better image quality for protocol B (concordant impression of 3 independent observers) with more accurate delineation of the basal ganglia. The count ratios with protocol B were (mean) 0.19 higher (equivalent to 13 %) than with protocol A. In the group of patients with count ratios > 1.55 there was the highest (and significant) difference between protocols A and B with (mean count ratio difference) 0.32 (equivalent to 20 %). Protocol B also allowed a better differentiation between patients clinically staged normal and abnormal. In patients with unilateral disease, this difference between normal and abnormal was more prominent (in comparison to the contralateral side as well as compared to the reference value [1.5]). The comparison of the count ratios with the clinical data revealed 7 patients with borderline results with
-
Berker, Bülent; Duvan, Candan İltemir; Kaya, Cemil; Aytaç, Ruşen; Satıroğlu, Hakan
2010-01-01
To determine the potential effect of the ultrashort gonadotropin-releasing hormone (GnRH) agonist/GnRH antagonist protocol versus the microdose GnRH agonist protocol in poor responders undergoing intracytoplasmic sperm injection (ICSI). The patients in the Agonist-Antagonist Group (n=41) were administered the ultrashort GnRH-agonist/ antagonist protocol, while the patients in the Microdose Group (n=41) were stimulated according to the microdose flare-up protocol. The mean number of mature oocytes retrieved was the primary outcome measure. Fertilization rate, implantation rate per embryo and clinical pregnancy rates were secondary outcome measures. There was no differenc between the mean number of mature oocytes retrieved in the two groups. There were also no statistical differences between the two groups in terms of peak serum E2 level, canceled cycles, endometrial thickness on hCG day, number of 2 pronucleus and number of embryos transferred. However, the total gonadotropin consumption and duration of stimulation were significantly higher with the Agonist-Antagonist Group compared with the Microdose Group. The implantation and clinical pregnancy rates were similar between the two groups. Despite the high dose of gonadotropin consumption and longer duration of stimulation with the ultrashort GnRH agonist/ antagonist protocol, it seems that the Agonist-Antagonist Protocol is not inferior to the microdose protocol in poor responders undergoing ICSI.
-
A Student Teamwork Induction Protocol
Kamau, Caroline; Spong, Abigail
2015-01-01
Faulty group processes have harmful effects on performance but there is little research about intervention protocols to pre-empt them in higher education. This naturalistic experiment compared a control cohort with an inducted cohort. The inducted cohort attended a workshop, consultations, elected a leader and used tools (a group log and group…
-
Impact on the Food Industry of New EU Rules Implementing the Nagoya Protocol
DEFF Research Database (Denmark)
Van Vooren, Bart
2016-01-01
Over the years there have been global news reports of ‘bio-piracy’ by companies accused of marketing blockbuster products derived from the biological resources of developing countries. This perception stimulated the adoption of the 2010 Nagoya Protocol, to implement the objective of the 1992...... Regulation only encompasses bioprospecting or ethno-pharmacological R&D. Instead, the EU has purposely set up a broad regime that affects companies developing pharmaceuticals, cosmetics and biocides, as well as food, feed, beverages, and any of their components. This article summarizes the new EU Nagoya...... compliance regime, with examples drawn fromthe food sector to explain its impact....
-
Optimizing the high-resolution manometry (HRM) study protocol.
Patel, A; Ding, A; Mirza, F; Gyawali, C P
2015-02-01
Intolerance of the esophageal manometry catheter may prolong high-resolution manometry (HRM) studies and increase patient distress. We assessed the impact of obtaining the landmark phase at the end of the study when the patient has acclimatized to the HRM catheter. 366 patients (mean age 55.4 ± 0.8 years, 62.0% female) undergoing esophageal HRM over a 1-year period were studied. The standard protocol consisted of the landmark phase, 10 5 mL water swallows 20-30 s apart, and multiple rapid swallows where 4-6 2 mL swallows were administered in rapid succession. The modified protocol consisted of the landmark phase at the end of the study after test swallows. Study duration, technical characteristics, indications, and motor findings were compared between standard and modified protocols. Of the 366 patients, 89.6% underwent the standard protocol (study duration 12.9 ± 0.3 min). In 10.4% with poor catheter tolerance undergoing the modified protocol, study duration was significantly longer (15.6 ± 1.0 min, p = 0.004) despite similar duration of study maneuvers. Only elevated upper esophageal sphincter basal pressures at the beginning of the study segregated modified protocol patients. The 95th percentile time to landmark phase in the standard protocol patients was 6.1 min; as many as 31.4% of modified protocol patients could not obtain their first study maneuver within this period (p = 0.0003). Interpretation was not impacted by shifting the landmark phase to the end of the study. Modification of the HRM study protocol with the landmark phase obtained at the end of the study optimizes study duration without compromising quality. © 2014 John Wiley & Sons Ltd.
-
Islam, Shayla; Abdalla, Aisha H.; Habaebi, Mohamed H.; Latif, Suhaimi A.; Hassan, Wan H.; Hasan, Mohammad K.; Ramli, H. A. M.; Khalifa, Othman O.
2013-12-01
NEMO BSP is an upgraded addition to Mobile IPv6 (MIPv6). As MIPv6 and its enhancements (i.e. HMIPv6) possess some limitations like higher handoff latency, packet loss, NEMO BSP also faces all these shortcomings by inheritance. Network Mobility (NEMO) is involved to handle the movement of Mobile Router (MR) and it's Mobile Network Nodes (MNNs) during handoff. Hence it is essential to upgrade the performance of mobility management protocol to obtain continuous session connectivity with lower delay and packet loss in NEMO environment. The completion of handoff process in NEMO BSP usually takes longer period since MR needs to register its single primary care of address (CoA) with home network that may cause performance degradation of the applications running on Mobile Network Nodes. Moreover, when a change in point of attachment of the mobile network is accompanied by a sudden burst of signaling messages, "Signaling Storm" occurs which eventually results in temporary congestion, packet delays or even packet loss. This effect is particularly significant for wireless environment where a wireless link is not as steady as a wired link since bandwidth is relatively limited in wireless link. Hence, providing continuous Internet connection without any interruption through applying multihoming technique and route optimization mechanism in NEMO are becoming the center of attention to the current researchers. In this paper, we propose a handoff cost model to compare the signaling cost of MM-NEMO with NEMO Basic Support Protocol (NEMO BSP) and HMIPv6.The numerical results shows that the signaling cost for the MM-NEMO scheme is about 69.6 % less than the NEMO-BSP and HMIPv6.
-
International Nuclear Information System (INIS)
Islam, Shayla; Abdalla, Aisha H; Habaebi, Mohamed H; Latif, Suhaimi A; Hassan, Wan H; Hasan, Mohammad K; Ramli, H A M; Khalifa, Othman O
2013-01-01
NEMO BSP is an upgraded addition to Mobile IPv6 (MIPv6). As MIPv6 and its enhancements (i.e. HMIPv6) possess some limitations like higher handoff latency, packet loss, NEMO BSP also faces all these shortcomings by inheritance. Network Mobility (NEMO) is involved to handle the movement of Mobile Router (MR) and it's Mobile Network Nodes (MNNs) during handoff. Hence it is essential to upgrade the performance of mobility management protocol to obtain continuous session connectivity with lower delay and packet loss in NEMO environment. The completion of handoff process in NEMO BSP usually takes longer period since MR needs to register its single primary care of address (CoA) with home network that may cause performance degradation of the applications running on Mobile Network Nodes. Moreover, when a change in point of attachment of the mobile network is accompanied by a sudden burst of signaling messages, ''Signaling Storm'' occurs which eventually results in temporary congestion, packet delays or even packet loss. This effect is particularly significant for wireless environment where a wireless link is not as steady as a wired link since bandwidth is relatively limited in wireless link. Hence, providing continuous Internet connection without any interruption through applying multihoming technique and route optimization mechanism in NEMO are becoming the center of attention to the current researchers. In this paper, we propose a handoff cost model to compare the signaling cost of MM-NEMO with NEMO Basic Support Protocol (NEMO BSP) and HMIPv6.The numerical results shows that the signaling cost for the MM-NEMO scheme is about 69.6 % less than the NEMO-BSP and HMIPv6
-
The costs and cost-effectiveness of an integrated sepsis treatment protocol.
Talmor, Daniel; Greenberg, Dan; Howell, Michael D; Lisbon, Alan; Novack, Victor; Shapiro, Nathan
2008-04-01
Sepsis is associated with high mortality and treatment costs. International guidelines recommend the implementation of integrated sepsis protocols; however, the true cost and cost-effectiveness of these are unknown. To assess the cost-effectiveness of an integrated sepsis protocol, as compared with conventional care. Prospective cohort study of consecutive patients presenting with septic shock and enrolled in the institution's integrated sepsis protocol. Clinical and economic outcomes were compared with a historical control cohort. Beth Israel Deaconess Medical Center. Overall, 79 patients presenting to the emergency department with septic shock in the treatment cohort and 51 patients in the control group. An integrated sepsis treatment protocol incorporating empirical antibiotics, early goal-directed therapy, intensive insulin therapy, lung-protective ventilation, and consideration for drotrecogin alfa and steroid therapy. In-hospital treatment costs were collected using the hospital's detailed accounting system. The cost-effectiveness analysis was performed from the perspective of the healthcare system using a lifetime horizon. The primary end point for the cost-effectiveness analysis was the incremental cost per quality-adjusted life year gained. Mortality in the treatment group was 20.3% vs. 29.4% in the control group (p = .23). Implementing an integrated sepsis protocol resulted in a mean increase in cost of approximately $8,800 per patient, largely driven by increased intensive care unit length of stay. Life expectancy and quality-adjusted life years were higher in the treatment group; 0.78 and 0.54, respectively. The protocol was associated with an incremental cost of $11,274 per life-year saved and a cost of $16,309 per quality-adjusted life year gained. In patients with septic shock, an integrated sepsis protocol, although not cost-saving, appears to be cost-effective and compares very favorably to other commonly delivered acute care interventions.
-
Xu, Ling; Zhao, Zhiwen
2017-12-01
Quantum private comparison (QPC) protocol, including Alice, Bob and the third party Charlie, aims at comparing Alice and Bob's secret inputs correctly without leaking them. Firstly, χ ^+ state and W-Class state are used to conduct the entanglement swapping in this protocol. Either the basis {|φ ^± > ,|ψ ^± >} or the basis {|χ ^± > ,|ω ^± > } is chosen by Alice and Bob based on the predetermined value to measure the particle pairs. And three bits of secret inputs can be compared in this protocol in every comparison time, while most of previous QPC protocols can only compare one or two bits. The qubit efficiency of this protocol is 60% more than others, which are 50% at most. Secondly, if the eavesdropper intends to obtain the secret inputs, it is important and primary to get the measurement results of particle pairs. In this protocol, even if the eavesdropper gets the accurate particle pairs, he cannot get the right measurement results without the right basis. Finally, this protocol is analyzed to be able to defend the secret inputs against various kinds of attack.
-
Security of a single-state semi-quantum key distribution protocol
Zhang, Wei; Qiu, Daowen; Mateus, Paulo
2018-06-01
Semi-quantum key distribution protocols are allowed to set up a secure secret key between two users. Compared with their full quantum counterparts, one of the two users is restricted to perform some "classical" or "semi-quantum" operations, which potentially makes them easily realizable by using less quantum resource. However, the semi-quantum key distribution protocols mainly rely on a two-way quantum channel. The eavesdropper has two opportunities to intercept the quantum states transmitted in the quantum communication stage. It may allow the eavesdropper to get more information and make the security analysis more complicated. In the past ten years, many semi-quantum key distribution protocols have been proposed and proved to be robust. However, there are few works concerning their unconditional security. It is doubted that how secure the semi-quantum ones are and how much noise they can tolerate to establish a secure secret key. In this paper, we prove the unconditional security of a single-state semi-quantum key distribution protocol proposed by Zou et al. (Phys Rev A 79:052312, 2009). We present a complete proof from information theory aspect by deriving a lower bound of the protocol's key rate in the asymptotic scenario. Using this bound, we figure out an error threshold value such that for all error rates that are less than this threshold value, the secure secret key can be established between the legitimate users definitely. Otherwise, the users should abort the protocol. We make an illustration of the protocol under the circumstance that the reverse quantum channel is a depolarizing one with parameter q. Additionally, we compare the error threshold value with some full quantum protocols and several existing semi-quantum ones whose unconditional security proofs have been provided recently.
-
Efficacy of 2 finishing protocols in the quality of orthodontic treatment outcome.
Stock, Gregory J; McNamara, James A; Baccetti, Tiziano
2011-11-01
The objectives of this prospective clinical study were to evaluate the quality of treatment outcomes achieved with a complex orthodontic finishing protocol involving serpentine wires and a tooth positioner, and to compare it with the outcomes of a standard finishing protocol involving archwire bends used to detail the occlusion near the end of active treatment. The complex finishing protocol sample consisted of 34 consecutively treated patients; 1 week before debonding, their molar bands were removed, and serpentine wires were placed; this was followed by active wear of a tooth positioner for up to 1 month after debonding. The standard finishing protocol group consisted of 34 patients; their dental arches were detailed with archwire bends and vertical elastics. The objective grading system of the American Board of Orthodontics was used to quantify the quality of the finish at each time point. The Wilcoxon signed rank test was used to compare changes in the complex finishing protocol; the Mann-Whitney U test was used to compare changes between groups. The complex finishing protocol group experienced a clinically significant improvement in objective grading system scores after treatment with the positioner. Mild improvement in posterior space closure was noted after molar band removal, but no improvement in the occlusion was observed after placement of the serpentine wires. Patients managed with the complex finishing protocol also had a lower objective grading system score (14.7) at the end of active treatment than did patients undergoing the standard finishing protocol (23.0). Tooth positioners caused a clinically significant improvement in interocclusal contacts, interproximal contacts, and net objective grading system score; mild improvement in posterior band space was noted after molar band removal 1 week before debond. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.
-
Comparison of MANET Routing Protocols in Different Traffic and Mobility Models
Directory of Open Access Journals (Sweden)
J. Baraković
2010-06-01
Full Text Available Routing protocol election in MANET (Mobile Ad Hoc Network is a great challenge, because of its frequent topology changes and routing overhead. This paper compares performances of three routing protocols: Destination Sequenced Distance Vector (DSDV, Ad Hoc Ondemand Distance Vector (AODV and Dynamic Source Routing (DSR, based on results analysis obtained using simulations with different load and mobility scenarios performed with Network Simulator version 2 (NS-2. In low load and low mobility scenarios routing protocols perform in a similar manner. However, with mobility and load increasing DSR outperforms AODV and DSDV protocols.
-
Analyzing the effect of routing protocols on media access control protocols in radio networks
Energy Technology Data Exchange (ETDEWEB)
Barrett, C. L. (Christopher L.); Drozda, M. (Martin); Marathe, A. (Achla); Marathe, M. V. (Madhav V.)
2002-01-01
We study the effect of routing protocols on the performance of media access control (MAC) protocols in wireless radio networks. Three well known MAC protocols: 802.11, CSMA, and MACA are considered. Similarly three recently proposed routing protocols: AODV, DSR and LAR scheme 1 are considered. The experimental analysis was carried out using GloMoSim: a tool for simulating wireless networks. The main focus of our experiments was to study how the routing protocols affect the performance of the MAC protocols when the underlying network and traffic parameters are varied. The performance of the protocols was measured w.r.t. five important parameters: (i) number of received packets, (ii) average latency of each packet, (iii) throughput (iv) long term fairness and (v) number of control packets at the MAC layer level. Our results show that combinations of routing and MAC protocols yield varying performance under varying network topology and traffic situations. The result has an important implication; no combination of routing protocol and MAC protocol is the best over all situations. Also, the performance analysis of protocols at a given level in the protocol stack needs to be studied not locally in isolation but as a part of the complete protocol stack. A novel aspect of our work is the use of statistical technique, ANOVA (Analysis of Variance) to characterize the effect of routing protocols on MAC protocols. This technique is of independent interest and can be utilized in several other simulation and empirical studies.
-
Energy Reduction Multipath Routing Protocol for MANET Using Recoil Technique
Directory of Open Access Journals (Sweden)
Rakesh Kumar Sahu
2018-04-01
Full Text Available In Mobile Ad-hoc networks (MANET, power conservation and utilization is an acute problem and has received significant attention from academics and industry in recent years. Nodes in MANET function on battery power, which is a rare and limited energy resource. Hence, its conservation and utilization should be done judiciously for the effective functioning of the network. In this paper, a novel protocol namely Energy Reduction Multipath Routing Protocol for MANET using Recoil Technique (AOMDV-ER is proposed, which conserves the energy along with optimal network lifetime, routing overhead, packet delivery ratio and throughput. It performs better than any other AODV based algorithms, as in AOMDV-ER the nodes transmit packets to their destination smartly by using a varying recoil off time technique based on their geographical location. This concept reduces the number of transmissions, which results in the improvement of network lifetime. In addition, the local level route maintenance reduces the additional routing overhead. Lastly, the prediction based link lifetime of each node is estimated which helps in reducing the packet loss in the network. This protocol has three subparts: an optimal route discovery algorithm amalgamation with the residual energy and distance mechanism; a coordinated recoiled nodes algorithm which eliminates the number of transmissions in order to reduces the data redundancy, traffic redundant, routing overhead, end to end delay and enhance the network lifetime; and a last link reckoning and route maintenance algorithm to improve the packet delivery ratio and link stability in the network. The experimental results show that the AOMDV-ER protocol save at least 16% energy consumption, 12% reduction in routing overhead, significant achievement in network lifetime and packet delivery ratio than Ad hoc on demand multipath distance vector routing protocol (AOMDV, Ad hoc on demand multipath distance vector routing protocol life
-
On the implementation of a deterministic secure coding protocol using polarization entangled photons
Ostermeyer, Martin; Walenta, Nino
2007-01-01
We demonstrate a prototype-implementation of deterministic information encoding for quantum key distribution (QKD) following the ping-pong coding protocol [K. Bostroem, T. Felbinger, Phys. Rev. Lett. 89 (2002) 187902-1]. Due to the deterministic nature of this protocol the need for post-processing the key is distinctly reduced compared to non-deterministic protocols. In the course of our implementation we analyze the practicability of the protocol and discuss some security aspects of informat...
-
Sun, Chunling; Cheng, Xuemei
2017-11-01
The government-oriented industry guidance Funds solve the problem of financing difficulty and high innovation under the background of China’s new normal. Through the provinces and cities of the policies and regulations of the collation and comparative analysis, it will be divided into three modes. And then compare among three modes and analyze applicability to guide the construction of provinces and cities.
-
An Authentication Protocol for Future Sensor Networks.
Bilal, Muhammad; Kang, Shin-Gak
2017-04-28
-logic) and simulated the SMSN and previously proposed schemes in an automated protocol verifier tool. Finally, we compared the computational complexity and communication cost against well-known authentication protocols.
-
Comparison of 2 intravenous insulin protocols: Glycemia variability in critically ill patients.
Gómez-Garrido, Marta; Rodilla-Fiz, Ana M; Girón-Lacasa, María; Rodríguez-Rubio, Laura; Martínez-Blázquez, Anselmo; Martínez-López, Fernando; Pardo-Ibáñez, María Dolores; Núñez-Marín, Juan M
2017-05-01
Glycemic variability is an independent predictor of mortality in critically ill patients. The objective of this study was to compare two intravenous insulin protocols in critically ill patients regarding the glycemic variability. This was a retrospective observational study performed by reviewing clinical records of patients from a Critical Care Unit for 4 consecutive months. First, a simpler Scale-Based Intravenous Insulin Protocol (SBIIP) was reviewed and later it was compared for the same months of the following year with a Sliding Scale-Based Intravenous Insulin Protocol (SSBIIP). All adult patients admitted to the unit during the referred months were included. Patients in whom the protocol was not adequately followed were excluded. A total of 557 patients were reviewed, of whom they had needed intravenous insulin 73 in the first group and 52 in the second group. Four and two patients were excluded in each group respectively. Glycemic variability for both day 1 (DS1) and total stay (DST) was lower in SSBIIP patients compared to SBIIP patients: SD1 34.88 vs 18.16 and SDT 36.45 vs 23.65 (P<.001). A glycemic management protocol in critically ill patients based on sliding scales decreases glycemic variability. Copyright © 2017 SEEN. Publicado por Elsevier España, S.L.U. All rights reserved.
-
Early functional outcome of two surgical protocols used in the repair ...
African Journals Online (AJOL)
Background and objective The outcome of different treatment protocols for primary management of patients with complete unilateral cleft lip palate (UCLP) may vary considerably. This study aimed to compare the results of quality of speech and velopharyngeal sphincter mechanism between two surgical protocols used in ...
-
Deep-sequencing protocols influence the results obtained in small-RNA sequencing.
Directory of Open Access Journals (Sweden)
Joern Toedling
Full Text Available Second-generation sequencing is a powerful method for identifying and quantifying small-RNA components of cells. However, little attention has been paid to the effects of the choice of sequencing platform and library preparation protocol on the results obtained. We present a thorough comparison of small-RNA sequencing libraries generated from the same embryonic stem cell lines, using different sequencing platforms, which represent the three major second-generation sequencing technologies, and protocols. We have analysed and compared the expression of microRNAs, as well as populations of small RNAs derived from repetitive elements. Despite the fact that different libraries display a good correlation between sequencing platforms, qualitative and quantitative variations in the results were found, depending on the protocol used. Thus, when comparing libraries from different biological samples, it is strongly recommended to use the same sequencing platform and protocol in order to ensure the biological relevance of the comparisons.
-
Application of IoT concept on predictive maintenance of industrial equipment
Directory of Open Access Journals (Sweden)
Parpala Radu Constantin
2017-01-01
Full Text Available The Internet of Things (IoT concept describes an intelligent connectivity of smart devices using the internet network. Nowadays, companies try different approaches for predictive maintenance as a solution to reduce costs and the frequency of maintenance activities. The IoT platforms provide a good support for predictive maintenance as it can integrate information from different machines and manufacturing systems. The main drawback in integrating production system with IoT dedicated platforms is the communication framework, knowing that the main industrial communication protocols are incompatible with modern communication protocols implemented on IoT platforms. In this context, the present paper proposes a new and simple method for on-line monitoring and predictive maintenance of industrial equipment. This method has two features of connected manufacturing. One of these is process monitoring for constant quality assurance, the other one is condition monitoring in order to prevent unplanned downtimes. A case study is presented to demonstrate the feasibility of the proposed method.
-
International Nuclear Information System (INIS)
Las Casas, Alexandre
2004-01-01
Several methods are used In the pollutant removal from Industrial and domestic wastewater. However when the degradation of toxic organic pollutants, mainly the recalcitrant is objectified, the conventional treatments usually do not meet the desirable performance in the elimination or decrease the impact when the effluent are released to the environment what takes to the research of alternative methods that seek the improvement of the efficiency of the wastewater treatment systems jointly employees or separately. This work presents a study of degradation/removal of pollutants organic compounds comparing two methods using radiation from industrial electron beam and granular activated carbon (GAC). The removal efficiency of the pollutants was evaluated and it was verified that the efficiency of adsorption with activated carbon is similar to the radiation method. The obtained results allowed to evaluated the relative costs of these methods. (author)
-
Kousi, Evanthia; Borri, Marco; Dean, Jamie; Panek, Rafal; Scurr, Erica; Leach, Martin O.; Schmidt, Maria A.
2016-01-01
MRI has been extensively used in breast cancer staging, management and high risk screening. Detection sensitivity is paramount in breast screening, but variations of signal-to-noise ratio (SNR) as a function of position are often overlooked. We propose and demonstrate practical methods to assess spatial SNR variations in dynamic contrast-enhanced (DCE) breast examinations and apply those methods to different protocols and systems. Four different protocols in three different MRI systems (1.5 and 3.0 T) with receiver coils of different design were employed on oil-filled test objects with and without uniformity filters. Twenty 3D datasets were acquired with each protocol; each dataset was acquired in under 60 s, thus complying with current breast DCE guidelines. In addition to the standard SNR calculated on a pixel-by-pixel basis, we propose other regional indices considering the mean and standard deviation of the signal over a small sub-region centred on each pixel. These regional indices include effects of the spatial variation of coil sensitivity and other structured artefacts. The proposed regional SNR indices demonstrate spatial variations in SNR as well as the presence of artefacts and sensitivity variations, which are otherwise difficult to quantify and might be overlooked in a clinical setting. Spatial variations in SNR depend on protocol choice and hardware characteristics. The use of uniformity filters was shown to lead to a rise of SNR values, altering the noise distribution. Correlation between noise in adjacent pixels was associated with data truncation along the phase encoding direction. Methods to characterise spatial SNR variations using regional information were demonstrated, with implications for quality assurance in breast screening and multi-centre trials.
-
Quantum protocols within Spekkens' toy model
Disilvestro, Leonardo; Markham, Damian
2017-05-01
Quantum mechanics is known to provide significant improvements in information processing tasks when compared to classical models. These advantages range from computational speedups to security improvements. A key question is where these advantages come from. The toy model developed by Spekkens [R. W. Spekkens, Phys. Rev. A 75, 032110 (2007), 10.1103/PhysRevA.75.032110] mimics many of the features of quantum mechanics, such as entanglement and no cloning, regarded as being important in this regard, despite being a local hidden variable theory. In this work, we study several protocols within Spekkens' toy model where we see it can also mimic the advantages and limitations shown in the quantum case. We first provide explicit proofs for the impossibility of toy bit commitment and the existence of a toy error correction protocol and consequent k -threshold secret sharing. Then, defining a toy computational model based on the quantum one-way computer, we prove the existence of blind and verified protocols. Importantly, these two last quantum protocols are known to achieve a better-than-classical security. Our results suggest that such quantum improvements need not arise from any Bell-type nonlocality or contextuality, but rather as a consequence of steering correlations.
-
Improving an Anonymous and Provably Secure Authentication Protocol for a Mobile User
Directory of Open Access Journals (Sweden)
Jongho Moon
2017-01-01
Full Text Available Recently many authentication protocols using an extended chaotic map were suggested for a mobile user. Many researchers demonstrated that authentication protocol needs to provide key agreement, mutual authentication, and user anonymity between mobile user and server and resilience to many possible attacks. In this paper, we cautiously analyzed chaotic-map-based authentication scheme and proved that it is still insecure to off-line identity guessing, user and server impersonation, and on-line identity guessing attacks. To address these vulnerabilities, we proposed an improved protocol based on an extended chaotic map and a fuzzy extractor. We proved the security of the proposed protocol using a random oracle and AVISPA (Automated Validation of Internet Security Protocols and Applications tool. Furthermore, we present an informal security analysis to make sure that the improved protocol is invulnerable to possible attacks. The proposed protocol is also computationally efficient when compared to other previous protocols.
-
International Nuclear Information System (INIS)
Mohammadi, H.; Abbasi, F.; Kar Bakhshe Raveri, S.
2017-01-01
One of the most important issues which has recently drawn attention is the preservation of the earth's ecosystems due to the events and environmental crises caused by industrial activities. The formation of more than a dozen conventions and protocols in different areas of environment also shows the importance of this issue. Given the implementation of the Convention and the Protocol, particularly the economic, social and environmental effects on all countries, especially developing countries with weak and vulnerable economy, in this article we Introduce environmental indices for Sustainable Development. In the case of carbon dioxide emissions, to examine emissions spectrum in the member states of Kyoto Protocol concurrent with the implementation of the first period, then climatic approaches were analyzed after the implementation of the first round. This research employs explanatory- analysis method. Examining indices shows that industrialized countries meet environmental requirements of the Kyoto Protocol and with regard to their own economic policy try to fulfill their obligations to reduce their greenhouse gas emissions but we face the global trend of rising emissions. This trend can be observed in non-Annex countries, including the Islamic Republic of Iran that there is no obligation in the first round to reduce greenhouse gas emissions.
-
Rodriguez-Parra, Maria J.; Adrian, Jose A.; Casado, Juan C.
2011-01-01
Purpose: This study evaluates the effectiveness of two different programs of voice-treatment on a heterogeneous group of dysphonic speakers and the stability of therapeutic progress for longterm follow-up post-treatment period, using a limited multidimensional protocol of evaluation. Method: Forty-two participants with voice disorders were…
-
Measuring service quality and a comparative analysis in airline industry
Directory of Open Access Journals (Sweden)
Mohammad Mehdi Izadi
2013-01-01
Full Text Available Quality of services in airline industry plays an important role in market penetration and customer retention. In this paper, we present a factor analysis to find important factors in Iranian Airline industry. The study designs a questionnaire consist of 35 questions and distribute it among 200 customers who regularly use services from 16 different airlines and they are investigated based on the implementation of factor analysis. The results of our survey determines seven important factors including physical features of the environment, Kettering, Pre-flight passenger services, Ability to respond, Reliability, Passenger service flight and Virtual Passenger Services. The paper discusses that improving these seven factors can significantly improve service quality in this sector.
-
Gazzinelli, R.; Moreira, R. L.; Rodrigues, W. N.
1997-04-01
Fluorescence Detector in Biological Sciences and Chemistry * Quality Assessment of Solder Bonds of Printed Circuit Boards by Metallography * Observation of InAs Nanostructures on (100)-GaAs Substrate with Atomic Force Microscopy * In Situ Observations By Atomic Force Microscopy of Corrosion of An Aluminium Film in a Solution of HCl * Atomic Force Microscopy of Metallurgical Interactions in Integrated Circuit Contacts * Atomic Force Microscopy of Microcavity Semiconductor Devices * Characterization of the Emitted Air Particies By Steel Industries * A Comparative Study of the Anodic Behavior of Duplex Stainless Steels - Din 1.4462-In Synthetic Sea-water * Study of the Corrosion Resistance of Duplex Stainless Steels in Solutions Containing Chlorides, Compared with other Stainless Steels * Development of New Materials and Devices * Development of the Electronic Signal in Proportional Detectors * Development of a Portable Ultrasound Equipment for Backfat Evaluation of Live Pigs * Thermal Barrier Coatings by Plasma Spraying * Scaling in Fragmentation Phenomena * A Study of Sn:In2O3 (ITO)/CuInSe2 Heterojunction for Solar Energy Applications * Organising a Ceramic Powder Shape Electronic Database * Feasibility of a Mixer Using the Negative Resistance of a SNS Junction * Characteristics of v-SiO2 Melted in Refractory Metal Furnace * Lasers for Industrial and Medical Applications * Portable Cat Scanner Applied to Collapsible Soil Studies * Experiments with Slip Casting of Fine Ceramics and v-SiO2 * R2Fe17 Halides: The Birth of a Material for Potential Hard Magnetic Applications * Computerized System for Embryos Freezing Protocols Development * Ferroelectric Parent Materials as Possible High-Tc Superconductors: High Temperature Magnetic and Electric Properties of Modified BNN and SBN * CVD Diamond: Emerging Technology for Many Applications * Development of New Techniques and Processes * Application of Mechanical Relaxation Spectroscopy to the Development of Low Carbon Steels
-
Performance evaluation of spatial vector routing protocol for wireless sensor networks
International Nuclear Information System (INIS)
Baloch, J.; Jokhio, I.
2012-01-01
WSNs (Wireless Sensor Networks) is an emerging area of research. Researchers worldwide are working on the issues faced by sensor nodes. Communication has been a major issue in wireless networks and the problem is manifolds in WSN s because of the limited resources. The routing protocol in such networks plays a pivotal role, as an effective routing protocol could significantly reduce the energy consumed in transmitting and receiving data packets throughout a network. In this paper the performance of SVR (Spatial Vector Routing) an energy efficient, location aware routing protocol is compared with the existing location aware protocols. The results from the simulation trials show the performance of SVR. (author)
-
Performance Evaluation of Spatial Vector Routing Protocol for Wireless Sensor Networks
Directory of Open Access Journals (Sweden)
Javed Ali Baloch
2012-10-01
Full Text Available WSNs (Wireless Sensor Networks is an emerging area of research. Researchers worldwide are working on the issues faced by sensor nodes. Communication has been a major issue in wireless networks and the problem is manifolds in WSNs because of the limited resources. The routing protocol in such networks plays a pivotal role, as an effective routing protocol could significantly reduce the energy consumed in transmitting and receiving data packets throughout a network. In this paper the performance of SVR (Spatial Vector Routing an energy efficient, location aware routing protocol is compared with the existing location aware protocols. The results from the simulation trials show the performance of SVR.
-
TCR industrial system integration strategy
Bartolomé, R; Sollander, P; Martini, R; Vercoutter, B; Trebulle, M
1999-01-01
New turnkey data acquisition systems purchased from industry are being integrated into CERN's Technical Data Server. The short time available for system integration and the large amount of data per system require a standard and modular design. Four different integration layers have been defined in order to easily 'plug in' industrial systems. The first layer allows the integration of the equipment at the digital I/O port or fieldbus (Profibus-DP) level. A second layer permits the integration of PLCs (Siemens S5, S7 and Telemecanique); a third layer integrates equipment drivers. The fourth layer integrates turnkey mimic diagrams in the TCR operator console. The second and third layers use two new event-driven protocols based on TCP/IP. Using this structure, new systems are integrated in the data transmission chain, the layer at which they are integrated depending only on their integration capabilities.
-
Optimization and industry new frontiers
Korotkikh, Victor
2003-01-01
Optimization from Human Genes to Cutting Edge Technologies The challenges faced by industry today are so complex that they can only be solved through the help and participation of optimization ex perts. For example, many industries in e-commerce, finance, medicine, and engineering, face several computational challenges due to the mas sive data sets that arise in their applications. Some of the challenges include, extended memory algorithms and data structures, new program ming environments, software systems, cryptographic protocols, storage devices, data compression, mathematical and statistical methods for knowledge mining, and information visualization. With advances in computer and information systems technologies, and many interdisci plinary efforts, many of the "data avalanche challenges" are beginning to be addressed. Optimization is the most crucial component in these efforts. Nowadays, the main task of optimization is to investigate the cutting edge frontiers of these technologies and systems ...
-
Energy Technology Data Exchange (ETDEWEB)
Ippolito, E.; Caterini, R.; Farsetti, P. [Department of Orthopaedic Surgery, University of Rome ' ' Tor Vergata' ' , Via della Ricerca Scientifica 135, 00173, Rome (Italy); Fraracci, L.; Di Mario, M. [Department of Radiology, IRCCS Santa Lucia Institute, Via Ardeatina 306, 00179, Rome (Italy)
2003-08-01
To compare the radiographic features of two series of congenital clubfeet to determine whether a different treatment protocol may influence the radiographic results at the end of skeletal growth. Two series of patients with congenital clubfeet, treated by two different manipulative techniques and by two different complementary soft tissue release operations, were radiographically studied at skeletal maturity. Twenty-one normal feet of the unilateral cases in both series served as controls. Anteroposterior and lateral radiographs of the feet were taken with the patient standing, and several radiographic parameters were studied. The size of the talus and calcaneus and the height of the talar trochlea were smaller than normal in all cases of clubfeet, were similar in both series and were not influenced by treatment, whereas all the other radiographic parameters studied were more or less different between the two series and seemed to be influenced by treatment. In no treated clubfoot of either series was a normal radiographic foot anatomy restored, not even in those feet that had an excellent clinical result. (orig.)
-
International Nuclear Information System (INIS)
Ippolito, E.; Caterini, R.; Farsetti, P.; Fraracci, L.; Di Mario, M.
2003-01-01
To compare the radiographic features of two series of congenital clubfeet to determine whether a different treatment protocol may influence the radiographic results at the end of skeletal growth. Two series of patients with congenital clubfeet, treated by two different manipulative techniques and by two different complementary soft tissue release operations, were radiographically studied at skeletal maturity. Twenty-one normal feet of the unilateral cases in both series served as controls. Anteroposterior and lateral radiographs of the feet were taken with the patient standing, and several radiographic parameters were studied. The size of the talus and calcaneus and the height of the talar trochlea were smaller than normal in all cases of clubfeet, were similar in both series and were not influenced by treatment, whereas all the other radiographic parameters studied were more or less different between the two series and seemed to be influenced by treatment. In no treated clubfoot of either series was a normal radiographic foot anatomy restored, not even in those feet that had an excellent clinical result. (orig.)
-
The radiological monitoring protocol for metallic products and cleared scrap management
International Nuclear Information System (INIS)
Gil Lopez, E.
2003-01-01
Event though the use of nuclear and radiological techniques is subject to strict controls in most countries, the presence of radioactive material in batches of metallic scrap has been detected with relative frequency in the last few years. This circumstance has motivated the implementation of a series of national and international initiatives aimed at detecting and preventing this type of events, whether they be intentional or involuntary. The Spanish iron and steel industry is one of the country's most important industrial sectors, and to a great extent it depends on the importation of a very significant amount of metallic scrap that it uses as raw material. Experience has shown that countries that import large amounts of scrap, apart from supporting the mentioned international initiatives, should complement them with other national initiatives to reduce the risks resulting from the presence of radioactive material in scrap. In this context, the Spanish authorities, together with trade unions and entrepreneurial associations in the metal reclamations and smelting sectors and ENRESA, have signed a voluntary Protocol that defines and implements a national radiological monitoring and control system for scrap materials and their byproducts. The Protocol defines the obligations and rights of the signatories, and it describes the monitoring and control system and its legal bases, the operation of both specific and other general-purpose radiological monitoring equipment that existed prior to this initiative, the development of radiological training and dissemination plans for professionals in the metal reclamation and smelting sectors, the establishment of effective systems for the safe management of any radioactive materials detected, and the general improvement of the national response system in the event of radiological emergencies. Since the Protocol took effect in November 1999, more than 100 enterprises from the metallurgical (steel, copper, lead and aluminum
-
Directory of Open Access Journals (Sweden)
Abbas Aflatoonian
2017-08-01
Full Text Available Background: Management of poor-responding patients is still major challenge in assisted reproductive techniques (ART. Delayed-start GnRH antagonist protocol is recommended to these patients, but little is known in this regards. Objective: The goal of this study was assessment of delayed-start GnRH antagonist protocol in poor responders, and in vitro fertilization (IVF outcomes. Materials and Methods: This randomized clinical trial included sixty infertile women with Bologna criteria for ovarian poor responders who were candidate for IVF. In case group (n=30, delayed-start GnRH antagonist protocol administered estrogen priming followed by early follicular-phase GnRH antagonist treatment for 7 days before ovarian stimulation with gonadotropin. Control group (n=30 treated with estrogen priming antagonist protocol. Finally, endometrial thickness, the rates of oocytes maturation, , embryo formation, and pregnancy were compared between two groups. Results: Rates of implantation, chemical, clinical, and ongoing pregnancy in delayed-start cycles were higher although was not statistically significant. Endometrial thickness was significantly higher in case group. There were no statistically significant differences in the rates of oocyte maturation, embryo formation, and IVF outcomes between two groups. Conclusion: There is no significant difference between delayed-start GnRH antagonist protocol versus GnRH antagonist protocol.
-
A slotted access control protocol for metropolitan WDM ring networks
Baziana, P. A.; Pountourakis, I. E.
2009-03-01
In this study we focus on the serious scalability problems that many access protocols for WDM ring networks introduce due to the use of a dedicated wavelength per access node for either transmission or reception. We propose an efficient slotted MAC protocol suitable for WDM ring metropolitan area networks. The proposed network architecture employs a separate wavelength for control information exchange prior to the data packet transmission. Each access node is equipped with a pair of tunable transceivers for data communication and a pair of fixed tuned transceivers for control information exchange. Also, each access node includes a set of fixed delay lines for synchronization reasons; to keep the data packets, while the control information is processed. An efficient access algorithm is applied to avoid both the data wavelengths and the receiver collisions. In our protocol, each access node is capable of transmitting and receiving over any of the data wavelengths, facing the scalability issues. Two different slot reuse schemes are assumed: the source and the destination stripping schemes. For both schemes, performance measures evaluation is provided via an analytic model. The analytical results are validated by a discrete event simulation model that uses Poisson traffic sources. Simulation results show that the proposed protocol manages efficient bandwidth utilization, especially under high load. Also, comparative simulation results prove that our protocol achieves significant performance improvement as compared with other WDMA protocols which restrict transmission over a dedicated data wavelength. Finally, performance measures evaluation is explored for diverse numbers of buffer size, access nodes and data wavelengths.
-
Evaluation of svr: a wireless sensor network routing protocol
International Nuclear Information System (INIS)
Baloch, J.; Khanzada, T.J.S.
2014-01-01
The advancement in technology has made it possible to create small in size, low cost sensor nodes. However, the small size and low cost of such nodes comesat at price that is, reduced processing power, low memory and significantly small battery energy storage. WSNs (Wireless Sensor Networks) are inherently ad hoc in nature and are assumed to work in the toughest terrain. The network lifetime plays a pivotal role in a wireless sensor network. A long network lifetime, could be achieved by either making significant changes in these low cost devices, which is not a feasible solution or by improving the means of communication throughout the network. The communication in such networks could be improved by employing energy efficient routing protocols, to route the data throughout the network. In this paper the SVR (Spatial Vector Routing) protocol is compared against the most common WSN routing protocols, and from the results it could be inferred that the SVR protocol out performs its counterparts. The protocol provides an energy efficient means of communication in the network. (author)
-
Directory of Open Access Journals (Sweden)
Vukić Vladimir Đ.
2016-01-01
Full Text Available The paper describes the protocol converter INT-485-MBRTU, developed for serial communication between the thyristor rectifier (based on the proprietary protocol "INT-CPD-05", according to standard RS-485 and the SCADA system (based on protocol "Modbus RTU", of the same standard in the thermal power plant "Nikola Tesla B1". Elementary data on industrial communication protocols and communication gateways were provided. The basic technical characteristics of the "Omron" programmable logic controller CJ series were described, as well as the developed device INT-485-MBRTU. Protocol converters with two versions of communication software were tested, differing only in one control word, intended for a forced successive change of communication sequences, in opposite to automatic sequence relieve. The device iNT-485-MBRTU, with the program for forced successive change of communication sequences, demonstrated the reliability of data transfer of 100 %, in a sample of approximately 480 messages. For nearly the same sample, the same protocol converter, with a version of the program without any type of message identifiers, transferred less than 60 % of the foreseen data. During multiple sixty-hour tests, the reliability of data transfer of at least 99.9979% was recorded, in 100% of the analysed cases, and for a sample of nearly 96,000 pairs of the send and receive messages. We analysed the results and estimated the additional possibilities for application of the INT-485-MBRTU protocol converter.
-
Performance Analysis of Secure and Private Billing Protocols for Smart Metering
Directory of Open Access Journals (Sweden)
Tom Eccles
2017-11-01
Full Text Available Traditional utility metering is to be replaced by smart metering. Smart metering enables fine-grained utility consumption measurements. These fine-grained measurements raise privacy concerns due to the lifestyle information which can be inferred from the precise time at which utilities were consumed. This paper outlines and compares two privacy-respecting time of use billing protocols for smart metering and investigates their performance on a variety of hardware. These protocols protect the privacy of customers by never transmitting the fine-grained utility readings outside of the customer’s home network. One protocol favors complexity on the trusted smart meter hardware while the other uses homomorphic commitments to offload computation to a third device. Both protocols are designed to operate on top of existing cryptographic secure channel protocols in place on smart meters. Proof of concept software implementations of these protocols have been written and their suitability for real world application to low-performance smart meter hardware is discussed. These protocols may also have application to other privacy conscious aggregation systems, such as electronic voting.
-
A multi-attribute Systemic Risk Index for comparing and prioritizing chemical industrial areas
International Nuclear Information System (INIS)
Reniers, G.L.L.; Sörensen, K.; Dullaert, W.
2012-01-01
Measures taken to decrease interdependent risks within chemical industrial areas should be based on quantitative data from a holistic (cluster-based) point of view. Therefore, this paper examines the typology of networks representing industrial areas to formulate recommendations to more effectively protect a chemical cluster against existing systemic risks. Chemical industrial areas are modeled as two distinct complex networks and are prioritized by computing two sub-indices with respect to existing systemic safety and security risks (using Domino Danger Units) and supply chain risks (using units from an ordinal expert scale). Subsequently, a Systemic Risk Index for the industrial area is determined employing the Borda algorithm, whereby the systemic risk index considers both a safety and security network risk index and a supply chain network risk index. The developed method allows decreasing systemic risks within chemical industrial areas from a holistic (inter-organizational and/or inter-cluster) perspective. An illustrative example is given.
-
Efficacy and safety of an insulin infusion protocol in a surgical ICU.
Taylor, Beth E; Schallom, Marilyn E; Sona, Carrie S; Buchman, Timothy G; Boyle, Walter A; Mazuski, John E; Schuerer, Douglas E; Thomas, James M; Kaiser, Christy; Huey, Way Y; Ward, Myrna R; Zack, Jeanne E; Coopersmith, Craig M
2006-01-01
Hyperglycemia is associated with complications in the surgical intensive care unit. The purpose of this study was to determine the efficacy and safety of nurse-driven insulin infusion protocols in lowering blood glucose (BG) in critical illness. All patients in a 24-bed surgical intensive care unit who required i.v. insulin infusions during 3 noncontiguous 6-month periods from 2002 to 2004 were evaluated. In the preintervention phase, 71 patients received a physician-initiated insulin infusion without a developed protocol. They were compared with 95 patients who received a nurse-driven insulin infusion protocol with a target BG of 120 to 150 mg/dL and to 119 patients who received a more stringent protocol with a target BG of 80 to 110 mg/dL. There was a stepwise decrease in average daily BG levels, from 190 to 163 to 132 mg/dL (p < 0.001). The less stringent protocol decreased the time to achieve a BG level < 150 mg/dL from 14.1 to 7.4 hours compared with physician-driven management (p < 0.05) resulting in similar time on an insulin infusion (53 versus 48 hours). The more intensive protocol brought BG levels < 150 mg/dL in 7.2 hours and < 111 mg/dL in 13.6 hours, but increased the length of time a patient was on an insulin infusion to 77 hours. The incidence of severe hypoglycemia (BG < 40 mg/dL) was statistically similar between the groups, ranging between 1.1% and 3.4%. Implementation of a nurse-driven protocol led to more rapid and more effective BG control in critically ill surgical patients compared with physician management. Tighter BG control can be obtained without a significant increase in hypoglycemia, although this is associated with increased time on an insulin infusion.
-
Souza, Priscila Morais Galvão; Carvalho, Bruno Ramalho de; Nakagawa, Hitomi Miura; Rassi, Thalita Reis Esselin; Barbosa, Antônio César Paes; Silva, Adelino Amaral
2017-06-01
This study aimed to compare the outcomes of controlled ovarian stimulation (COS) with corifollitropin alfa versus daily recombinant follicle-stimulating hormone (rRFSH) or highly purified human menopausal gonadotropin (HP-HMG) in patients undergoing in vitro fertilization (IVF) cycles based on gonadotropin-releasing hormone (GnRH) antagonist protocols. The primary endpoints were total number of oocytes and mature oocytes. This retrospective study looked into 132 controlled ovarian stimulation cycles from IVF or oocyte cryopreservation performed in a private human reproduction center between January 1 and December 31, 2014. Enrollment criteria: women aged 0.05). There were no significant differences in fertilization (76.9% vs. 76.8%, p=1.0), biochemical pregnancy (66.7% vs. 47.2%, p=0.1561) or embryo implantation rates (68.7% vs. 50%, p=0.2588) between the groups using corifollitropin alfa and rFSH or HMG, respectively. Corifollitropin alfa seems to be as effective as rFSH or HP-HMG when used in the first seven days of ovulation induction for patients undergoing assisted reproduction in GnRH antagonist protocols.
-
Industrial relationships and nationalisation in the South Wales coalmining industry
Energy Technology Data Exchange (ETDEWEB)
Zweiniger-Bargielowska, I.-M. (University of Cambridge, Cambridge (United Kingdom))
1990-01-01
The thesis examines industrial relationships in the South Wales coal mining industry at a colliery level. Various industrial relations stereotypes in the industry and the effect of nationalization on them are examined. The study concentrates on the collieries rather than the communities, comparing four collieries. Colliery managers, underofficials and mineworkers are studied, both in themselves and in relation to each other. Insights are gained into the causes of conflict within the industry. It is concluded that the ownership of the industry is not a major determinant of the level of conflict. It is suggested that many established views on the mining work force and attitudes to nationalization, work and unions need reassessing.
-
Data acquisition and meter unit based in wifi communication protocol
Directory of Open Access Journals (Sweden)
Gerardo Cázarez Ayala
2012-05-01
Full Text Available Without doubt, the competitive fast rhythm of the industries is one of the main causes helped bring to the accelerated growth of the electronic technology and the communication. The need to develop new products with a best quality, cheaper and faster as assure and increase the quality of the products in the international markets, requires of new technologies to the metering, monitoring and control of their production processes, of which finality is to improve the processes to guaranteed their products in the market in the less time possible, the best quality and low cost for the final consumer. This work is based in the design and implementation of a Wireless Data Acquisition Unit based in WiFi protocol, which is oriented to meter, monitoring and the control of processes in the industry, commercial and the home automation applications, using one of the wirelessprotocols with the biggest acceptance in the market, with the main objective of to take advantage of the installed physical infrastructure in the place of the application, like industry, company or house. The Unit is based in the RN-131G, a Roving Network company module, which is able to work in stand-alone mode with ultralow power consummation and supporting the IEEE 802.11b/g protocols, in which is possible to achieve transfer rates of up to 11 Mbps and 54 Mbps in /b & /g specifications respectively. Whit this unit is possible to meter up to 5 analogs signals with 14 bits precision and has include a temperature and relative humidity sensors. This unit can meter two digital signals and act mean two digitals outputs, and gas include an USB port for communication and programming tasks.
-
Gilmore, Anna B; Gallagher, Allen W A; Rowell, Andy
2018-06-13
The Illicit Trade Protocol (ITP) requires a global track and trace (T&T) system to reduce tobacco smuggling. Given the tobacco industry's (TI) historical involvement in tobacco smuggling, it stipulates that T&T 'shall not be performed by or delegated to the tobacco industry'. This paper explores the rationale for & nature of the TI's effors to influence the ITP & its T&T system. Analysis of leaked TI documents and publicly available data; ,investigation of front groups, trademark and patent ownership. Growing & diverse sources of evidence indicate that the TI remains involved in tobacco smuggling and that TI cigarettes account for around two-thirds of the illicit cigarette market. The TI therefore has a vested interest in controlling the global T&T system aimed to curtail this behaviour. To this end, Philip Morris International (PMI) adapted its pack marker system, Codentify, to meet T&T requirements, licensed it for free to its three major competitors who then collectively promoted it to governments using front groups and third parties including companies claiming to be independent despite clear TI links. PMI also sought to suggest Codentify was independent by selling some parts of its intellectual property on Codentify while retaining others, leaving a complex web of shared interests. In Africa, British American Tobacco used payments to obtain data suggesting its smaller competitor companies were evading taxes and secure influence with tax authorities. Regulatory capture has been enhanced by a public relations effort involving TI funding for conferences, training, research, and international police and anti-corruption organisations. Collectively this has created public messaging and a powerful network of organisations supportive of the TI's misleading postion on illicit. Governments should assume the TI seeks to control T&T systems in order to avoid scrutiny and minimise excise tax payments and that any T&T system based on Codentify, on intellectual property
-
Comparison of absorbed dose of two protocols of tomographic scanning in PET/CT exams
International Nuclear Information System (INIS)
Paiva, F.G.
2017-01-01
Positron Emission Tomography (PET) associated with Computed Tomography (CT) allows the fusion of functional and anatomical images. When compared to other diagnostic techniques, PET-CT subjects patients to higher levels of radiation, because two modalities are used in a single exam. In this study, the doses absorbed in 19 patient organs from the tomographic scan were evaluated. Radiochromic films were correctly positioned in the Alderson anthropomorphic simulator, male version. For evaluation, two whole body scan protocols were compared. For evaluation, two whole body scan protocols were compared. An increase of up to 600% in the absorbed dose in the pituitary was observed when the protocols were compared, with the lowest observed increase of approximately 160% for the liver. It is concluded that the dose from CT in patients submitted to PET-CT scanning is higher in the protocol used for diagnosis. Considering the high cost of PET-CT exam, in many cases it is preferable that the CT examination is of diagnostic quality, and not only for anatomical mapping, an argument based on the Principle of Justification
-
International Nuclear Information System (INIS)
Lorenzoni, A.
1995-01-01
Great efforts are devoted nowadays in many countries to reform the electric power system in order to achieve higher efficiency. The model under consideration is, more or less overtly, the new Electricity Supply Industry (ESI) in England and Wales which first transformed the vertically integrated state monopoly and introduced as the same time competition in electricity generation and supply. This paper analyses the trend of the final prices in UK during the ESI structural transformation between 1985 and 1994, since the final price of electricity is acknowledge as a good indicator of the performance of an ESI, and highlights the impact of privatisation on the different classes of consumers. It is investigated the evolution of the ratio between regulated-prices and free-market prices to further understand who profited from the new structure of the industry; the study continues with a comparison among the prices in UK, Italy and France. The analysis applies first to the nominal prices, and secondly to the deflated prices, in order to compare different years at constant purchase power
-
Kim, Kyuseok; Ha, Injin; Kim, Eunok; Kim, Kyunglee
2017-11-01
Acne is a multifactorial dermatosis, which is influenced not only by hormones but also by the biochemical relationship between them and the pilosebaceous unit. Inflammatory cytokines, chemokines, active oxygen, and zinc are known to be associated with the development of acne. Further, steroid metabolism is known as one of the important factors related to sebum secretion and comedone formation in acne. However, there is a lack of studies comparing these human biomarkers between healthy individuals and patients with acne. In particular, no study has investigated the relationship between human biomarkers and patterns of acne yet.The purpose of this study is to investigate diagnostic human biomarkers in acne by comparing the biological and metabolic biomarkers between healthy individuals and patients with acne and identify the relationship between human biomarkers and patterns of acne.This study is a protocol for a cross-sectional study. Forty healthy participants and 60 patients with acne will be recruited at 1 center. We will collect their blood samples and analyze the molecular biological and metabolic biomarkers (cytokines, chemokines, reactive oxygen species, corticotropin-releasing hormone, zinc, amino acid, 1-carbon metabolite, lipid metabolite, etc.). Further, we will administer questionnaires regarding their diet, sleep, stress, and other factors relating to acne and measure their skin elasticity.The study protocol was approved by the Institutional Review Board of Oriental Medical Hospital at Kyung Hee Medical Center (KOMCIRB-161118-HR-062). Written informed consent will be obtained from all the participants. The trial was registered in the Clinical Research Information Service, Republic of Korea: KCT0002212.This trial will provide evidence regarding diagnostic human biomarkers in acne and the relationship between the human biomarkers and patterns of acne.
-
International Nuclear Information System (INIS)
Dutreix, A.
1985-01-01
After a general introduction the protocol is divided in five sections dealing with: determination of the quality of X-ray, γ-ray and electron beams; the measuring instrument; calibration of the reference instrument; determination of the reference absorbed dose in the user's beams; determination of the absorbed dose in water at other points, in other conditions. The French protocol is not essentially different from the Nordic protocol and it is based on the experience gained in using both the American and the Nordic protocols. Therefore, only the main difference with the published protocols are discussed. (Auth.)
-
A new quantum sealed-bid auction protocol with secret order in post-confirmation
Wang, Jing-Tao; Chen, Xiu-Bo; Xu, Gang; Meng, Xiang-Hua; Yang, Yi-Xian
2015-10-01
A new security protocol for quantum sealed-bid auction is proposed to resist the collusion attack from some malicious bidders. The most significant feature of this protocol is that bidders prepare their particles with secret order in post-confirmation for encoding bids. In addition, a new theorem and its proof are given based on the theory of combinatorial mathematics, which can be used as evaluation criteria for the collusion attack. It is shown that the new protocol is immune to the collusion attack and meets the demand for a secure auction. Compared with those previous protocols, the security, efficiency and availability of the proposed protocol are largely improved.
-
Protocol Standards for Reporting Video Data in Academic Journals.
Rowland, Pamela A; Ignacio, Romeo C; de Moya, Marc A
2016-04-01
Editors of biomedical journals have estimated that a majority (40%-90%) of studies published in scientific journals cannot be replicated, even though an inherent principle of publication is that others should be able to replicate and build on published claims. Each journal sets its own protocols for establishing "quality" in articles, yet over the past 50 years, few journals in any field--especially medical education--have specified protocols for reporting the use of video data in research. The authors found that technical and industry-driven aspects of video recording, as well as a lack of standardization and reporting requirements by research journals, have led to major limitations in the ability to assess or reproduce video data used in research. Specific variables in the videotaping process (e.g., camera angle), which can be changed or be modified, affect the quality of recorded data, leading to major reporting errors and, in turn, unreliable conclusions. As more data are now in the form of digital videos, the historical lack of reporting standards makes it increasingly difficult to accurately replicate medical educational studies. Reproducibility is especially important as the medical education community considers setting national high-stakes standards in medicine and surgery based on video data. The authors of this Perspective provide basic protocol standards for investigators and journals using video data in research publications so as to allow for reproducibility.
-
A SURVEY ON MULTICAST ROUTING PROTOCOLS FOR PERFORMANCE EVALUATION IN WIRELESS SENSOR NETWORK
Directory of Open Access Journals (Sweden)
A. Suruliandi
2015-03-01
Full Text Available Multicast is a process used to transfer same message to multiple receivers at the same time. This paper presents the simulation and analysis of the performance of six different multicast routing protocols for Wireless Sensor Network (WSN. They are On Demand Multicast Routing Protocol (ODMRP, Protocol for Unified Multicasting through Announcement (PUMA, Multicast Adhoc On demand Distance Vector Protocol (MAODV, Overlay Boruvka-based Adhoc Multicast Protocol (OBAMP, Application Layer Multicast Algorithm (ALMA and enhanced version of ALMA (ALMA-H for WSN. Among them, ODMRP, MAODV and PUMA are reactive protocols while OBAMP, ALMA and ALMA-H are proactive protocols. This paper compares the performance of these protocols with common parameters such as Throughput, Reliability, End-to-End delay and Packet Delivery Ratio (PDR with increasing the numbers of nodes and increasing the speed of the nodes. The main objective of this work is to select the efficient multicast routing protocol for WSN among six multicast routing protocol based on relative strength and weakness of each protocol. The summary of above six multicast routing protocols is presented with a table of different performance characteristics. Experimental result shows that ODMRP attains higher throughput, reliability and higher packet delivery ratio than other multicast routing protocol, while incurring far less end-to-end delay.
-
PROTOCOLS FOR INCREASING THE LIFETIME OF NODES OF AD HOC WIRELESS NETWORKS
Directory of Open Access Journals (Sweden)
B.Malarkodi
2010-03-01
Full Text Available Power consumption of nodes in ad hoc networks is a critical issue as they predominantly operate on batteries. In order to improve the lifetime of an ad hoc network, all the nodes must be utilized evenly and the power required for connections must be minimized. Energy management deals with the process of managing energy resources by means of controlling the battery discharge, adjusting the transmission power and scheduling of power sources so as to increase the lifetime of the nodes of an ad hoc wireless network. In this paper, two protocols are proposed to improve the lifetime of the nodes. The first protocol assumes smart battery packages with L cells and uses dynamic programming (DP to optimally select the set of cells used to satisfy a request for power. The second one proposes a MAC layer protocol denoted as Power Aware medium Access Control (PAMAC protocol which enables the network layer to select a route with minimum total power requirement among the possible routes between a source and a destination provided all nodes in the routes have battery capacity above a threshold. The life time of the nodes using the DP based scheduling policy is found through simulation and compared with that obtained using the techniques reported in the literature. It is found that DP based policy increases the lifetime of the mobile nodes by a factor of 1.15 to 1.8. The life expectancy, the average power consumption and throughput of the network using PAMAC protocol are computed through simulation and compared with that of the other MAC layer protocols 802.11, MACA, and CSMA. Besides this, the life expectancy and average power consumption of the network for different values of threshold are also compared. From the simulation results, it is observed that PAMAC consumes the least power and provides the longest lifetime among the various MAC Layer protocols. Moreover, using PAMAC as the MAC layer protocol, the performance obtained using different routing layer
-
Comparison of Different Dosing Protocols of Anti-Snake Venom (ASV) in Snake Bite Cases.
Daswani, B R; Chandanwale, A S; Kadam, D B; Ghongane, B B; Ghorpade, V S; Manu, H C
2017-09-01
Considering the cost of Anti-Snake Venom (ASV) and irregularity in its supply, there is often a need to curtail doses of ASV, despite guidelines for management of snake bite. During June 2013 to September 2013, when ASV was in short supply, our institutional committee reviewed the overall hospital statistics of snake bite cases as well as scientific literature and formulated a working modified protocol that used low dose of ASV in snake bite cases. To retrospectively analyse and compare the modified ASV protocol versus conventional ASV protocol with respect to outcome, number of ASV vials required, duration of stay in the hospital/ ICU, and additional supportive interventions needed. This was a retrospective study conducted at a tertiary care teaching hospital, Maharashtra, India. Hospital records of inpatients admitted for snake bite during June 2013 to September 2013 (since introduction of the modified protocol) as well as during June 2012 to September 2012, (when patients received conventional protocol-historical controls) were retrospectively analysed to assess the number of ASV vials received by the patients during the stay, need for supportive therapy, duration of stay and outcome of the patients. There was a significant reduction in average number of ASV vials per patient, required vide the modified protocol compared to their historical controls (10.74±0.95 vs 28.17±2.75 pcost of management of each patient reduced by approximately 11974.41 INR per treated patient, based on the requirement of ASV. The modified ASV protocol used in this study is more cost effective as compared to the conventional protocol, deserves prospective evaluation and may be followed at least during prime time of scarcity of ASV.
-
Abbreviated Combined MR Protocol: A New Faster Strategy for Characterizing Breast Lesions.
Moschetta, Marco; Telegrafo, Michele; Rella, Leonarda; Stabile Ianora, Amato Antonio; Angelelli, Giuseppe
2016-06-01
The use of an abbreviated magnetic resonance (MR) protocol has been recently proposed for cancer screening. The aim of our study is to evaluate the diagnostic accuracy of an abbreviated MR protocol combining short TI inversion recovery (STIR), turbo-spin-echo (TSE)-T2 sequences, a pre-contrast T1, and a single intermediate (3 minutes after contrast injection) post-contrast T1 sequence for characterizing breast lesions. A total of 470 patients underwent breast MR examination for screening, problem solving, or preoperative staging. Two experienced radiologists evaluated both standard and abbreviated protocols in consensus. Sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and diagnostic accuracy for both protocols were calculated (with the histological findings and 6-month ultrasound follow-up as the reference standard) and compared with the McNemar test. The post-processing and interpretation times for the MR images were compared with the paired t test. In 177 of 470 (38%) patients, the MR sequences detected 185 breast lesions. Standard and abbreviated protocols obtained sensitivity, specificity, diagnostic accuracy, PPV, and NPV values respectively of 92%, 92%, 92%, 68%, and 98% and of 89%, 91%, 91%, 64%, and 98% with no statistically significant difference (P < .0001). The mean post-processing and interpretation time were, respectively, 7 ± 1 minutes and 6 ± 3.2 minutes for the standard protocol and 1 ± 1.2 minutes and 2 ± 1.2 minutes for the abbreviated protocol, with a statistically significant difference (P < .01). An abbreviated combined MR protocol represents a time-saving tool for radiologists and patients with the same diagnostic potential as the standard protocol in patients undergoing breast MRI for screening, problem solving, or preoperative staging. Copyright © 2016 Elsevier Inc. All rights reserved.
-
Evaluation of image quality and dose in renal colic: comparison of different spiral-CT protocols
International Nuclear Information System (INIS)
Rimondini, A.; Mucelli, R.P.; Dalla Palma, L.; De Denaro, M.; Bregant, P.
2001-01-01
The aim of this study was to test different technical spiral-CT parameters to obtain optimal image quality with reduced X-ray dose. Images were acquired with a spiral-CT system Philips Tomoscan AVE1, using 250 mA, 120 kV, and 1-s rotational time. Three protocols were tested: protocol A with 5-mm thickness, pitch 1.6, slice reconstruction every 2.5 mm; protocol B with 3-mm thickness, pitch 1.6, slice reconstruction every 1.5 mm; and protocol C with 3-mm thickness, pitch 2, slice reconstruction every 1.5 mm. Two phantoms were employed to evaluate the image quality. Axial images were acquired, then sagittal and coronal images were reconstructed. Finally, the absorbed X-ray dose for each protocol was measured. Regarding image quality, 5-mm-thick images (protocol A) showed greater spatial resolution and lower noise compared with 3-mm-thick images (protocols B and C) on the axial plane; 3-mm reconstructed sagittal and coronal images (protocols B and C) showed an improved image quality compared with 5-mm reformatted images (protocol A). Concerning X-ray dose, the mean dose was: protocol A 19.6±0.8 mGy; protocol B 14.4±0.6 mGy; protocol C 12.5±1.0 mGy. Our study supports the use of thin slices (3 mm) combined with pitch of 1.6 or 2 in renal colic for X-ray dose reduction to the patient and good image quality. (orig.)
-
IMHRP: Improved Multi-Hop Routing Protocol for Wireless Sensor Networks
Huang, Jianhua; Ruan, Danwei; Hong, Yadong; Zhao, Ziming; Zheng, Hong
2017-10-01
Wireless sensor network (WSN) is a self-organizing system formed by a large number of low-cost sensor nodes through wireless communication. Sensor nodes collect environmental information and transmit it to the base station (BS). Sensor nodes usually have very limited battery energy. The batteries cannot be charged or replaced. Therefore, it is necessary to design an energy efficient routing protocol to maximize the network lifetime. This paper presents an improved multi-hop routing protocol (IMHRP) for homogeneous networks. In the IMHRP protocol, based on the distances to the BS, the CH nodes are divided into internal CH nodes and external CH nodes. The set-up phase of the protocol is based on the LEACH protocol and the minimum distance between CH nodes are limited to a special constant distance, so a more uniform distribution of CH nodes is achieved. In the steady-state phase, the routes of different CH nodes are created on the basis of the distances between the CH nodes. The energy efficiency of communication can be maximized. The simulation results show that the proposed algorithm can more effectively reduce the energy consumption of each round and prolong the network lifetime compared with LEACH protocol and MHT protocol.
-
Gabr, Mahmoud M; Zakaria, Mahmoud M; Refaie, Ayman F; Khater, Sherry M; Ashamallah, Sylvia A; Ismail, Amani M; El-Badri, Nagwa; Ghoneim, Mohamed A
2014-01-01
Many protocols were utilized for directed differentiation of mesenchymal stem cells (MSCs) to form insulin-producing cells (IPCs). We compared the relative efficiency of three differentiation protocols. Human bone marrow-derived MSCs (HBM-MSCs) were obtained from three insulin-dependent type 2 diabetic patients. Differentiation into IPCs was carried out by three protocols: conophylline-based (one-step protocol), trichostatin-A-based (two-step protocol), and β -mercaptoethanol-based (three-step protocol). At the end of differentiation, cells were evaluated by immunolabeling for insulin production, expression of pancreatic endocrine genes, and release of insulin and c-peptide in response to increasing glucose concentrations. By immunolabeling, the proportion of generated IPCs was modest ( ≃ 3%) in all the three protocols. All relevant pancreatic endocrine genes, insulin, glucagon, and somatostatin, were expressed. There was a stepwise increase in insulin and c-peptide release in response to glucose challenge, but the released amounts were low when compared with those of pancreatic islets. The yield of functional IPCs following directed differentiation of HBM-MSCs was modest and was comparable among the three tested protocols. Protocols for directed differentiation of MSCs need further optimization in order to be clinically meaningful. To this end, addition of an extracellular matrix and/or a suitable template should be attempted.
-
Directory of Open Access Journals (Sweden)
Yuan Zhou
2018-06-01
Full Text Available Climate-relevant technologies, like wind and solar energy, are crucial for mitigating climate change and for achieving sustainable development. Recent literature argues that Chinese solar firms play more active roles in international knowledge flows, which may better explain their success in international markets when compared to those of Chinese wind firms; however, empirical evidence remains sparse. This study aims to explore to what extent and how do the international knowledge flows differ between China’s wind and solar photovoltaic (PV industries? From a network perspective, this paper develops a three-dimensional framework to compare the knowledge flows in both explicit and tacit dimensions: (i inter-country explicit knowledge clusters (by topological clustering of patent citation network; (ii inter-firm explicit knowledge flow (patent citation network of key firms; and, (iii inter-firm tacit knowledge flow (by desktop research and interviews. The results show that China’s PV industry has stronger international knowledge linkages in terms of knowledge clustering and explicit knowledge flow, but the wind power industry has a stronger tacit knowledge flow. Further, this study argues that the differences of global knowledge links between China’s wind and solar PV industries may be caused by technology characteristics, market orientation, and policy implementation. This suggests that these industries both have strong connections to global knowledge networks, but they may involve disparate catch-up pathways that concern follower-modes and leader-modes. These findings are important to help us understand how China can follow sustainable development pathways in the light of climate change.
-
Directory of Open Access Journals (Sweden)
Brad G. Kurowski
2018-06-01
Full Text Available Introduction: The objective of this manuscript is to describe the methodology that will be used to test the comparative effectiveness, feasibility, and acceptability of three formats of family problem solving therapy (F-PST for improving functional outcomes of complicated mild to severe adolescent TBI. Methods: Three-arm comparative effectiveness, randomized clinical trial (RCT design. We describe the protocol of a three-arm RCT comparing the effectiveness of three modalities of F-PST to reduce executive dysfunction and behavior problems following TBI in adolescence. The RCT will compare the relative effectiveness among face-to-face; online and self-directed; and therapist-supported online modes of treatment. Ethics and dissemination: It is anticipated that findings from this work will inform future clinical care practices, with implications for treatment of other patient populations of youth with psychological symptoms arising from neurological conditions. Institutional review board approval will be obtained from all sites prior to commencement of the study. Clinical Trials Registration: NCT:02368366, Keywords: Pediatric traumatic brain injury, Telehealth, Problem solving, Behavior, Executive function
-
Ursache, M.; Avădanei, M. L.; Ciobanu, L.; Loghin, M. C.; Ionesi, D. S.; Loghin, E.
2017-10-01
The paper presents the objectives, the planned outputs and the innovative aspects of the project entitled “Developing new skills for the extroversion specializations of fashion industry in Europe”, acronym EXTRO SKILLS, which is co-financed by the European Commission under the Erasmus+ Programme, Key Action 2 - Strategic Partnerships. This is a 30 months project and started on December 1-st, 2015. The project aims to bridge the gap between fashion industries and lack of specific expertise and experts of SMEs in these industries. Fashion industries require a more qualified workforce and, therefore, the availability of adequately skilled workers and trained and qualified personnel for their export and fashion marketing departments has become one of the major issues. The new curricula that will be developed in the project will offer essential transversal skills for a quick and qualified response to the international trade and market demands and for enhancing the extroversion and the competitiveness of the fashion industry. The learning content will be tailored to the needs of export and fashion marketing personnel. The constitution of the partnership was based on the cooperation between education and employment in order to better achieve the objectives of the project. The project consortium includes six partners from five countries (Greece, Belgium, Romania, Spain and UK).
-
Quebec industry and climatic changes : Quebec Industry Working Group on Climatic Changes
International Nuclear Information System (INIS)
2001-03-01
Global climatic change is a phenomenon greatly influenced by greenhouse gas emissions resulting from human activity and the natural greenhouse effect necessary to sustain life on the planet. Carbon dioxide emissions in the atmosphere now exceed the levels prior to the industrial revolution by 31 per cent. Half of this increase occurred during the past 30 years, while the average temperature increased by 0.3 to 0.6 degrees C. By using climate change models, scientists have linked this increase to the increase in the concentration of carbon dioxide in the atmosphere and predict that the average temperature will rise by 1 to 3.5 degrees C during the next century with increases of 5 to 10 degrees C being felt in certain parts of Canada. In an effort to curb the emissions of carbon dioxide, the Quebec Industry Working Group on Climatic Change was created to represent different sectors of the industry, including energy, metallurgy, aluminium, cement, environment, mines, plastics, petrochemicals, pulp and paper, and manufacturing. The group worked at meeting the following objectives: (1) to examine the possibilities of reducing greenhouse gases emissions in the industrial sector, (2) to propose and evaluate measures and initiatives for the reduction of greenhouse gases emissions including their cost, impact and potential timetable for implementation, (3) to identify new and promising technologies in the field of greenhouse gases reduction, (4) to identify business opportunities and risks for industry in Quebec, and (5) to recommend an implementation strategy for the Kyoto Protocol for each sector, in terms of reduction measures that would be economical and in agreement with the various plans in place at the federal, provincial and municipal levels. A total of 22 recommendations were proposed covering the entire spectrum of the mandate. 15 tabs, 2 appendices
-
The HPA photon protocol and proposed electron protocol
International Nuclear Information System (INIS)
Pitchford, W.G.
1985-01-01
The Hospital Physicists Association (HPA) photon dosimetry protocol has been produced and was published in 1983. Revised values of some components of Csub(lambda) and refinements introduced into the theory in the last few years have enabled new Csub(lambda) values to be produced. The proposed HPA electron protocol is at present in draft form and will be published shortly. Both protocels are discussed. (Auth.)
-
Directory of Open Access Journals (Sweden)
Shamim Pilehvari
2016-05-01
Full Text Available Objective: To compare the pregnancy outcomes achieved by in vitro fertilization (IVF between minimal stimulation and conventional antagonist protocols in poor ovarian responders (PORs.Materials and methods: In this randomized controlled trial, 77 PORs undergoing IVF were selected and divided into two groups. First group was the minimal stimulation group (n = 42 receiving 100 mg/day clomiphene citrate on day 2of the cycle for 5 day that was followed by150IU/day human menopausal gonadotropin (hMG on day 5 of the cycle. Second group was the conventional group (n = 35 receiving at least 300 IU/daygonadotropin on day 2 of the cycle. Gonadotropin-releasing hormone (GnRH antagonist protocol was applied for both groups according to flexible protocol. Number of retrieved oocytes and chemical pregnancy rate were the main outcomes.Results: There was no difference in number ofretrieved oocyte and pregnancy rate (2.79 ± 1.96 vs. 2.20 ± 1.71 and 5.6% vs. 4.1%; p > 0.05 between both groups. The gonadotropin dose used in the minimal stimulation group was lower than conventional group (1046 ± 596 vs. 2806 ± 583.Conclusion: Minimal stimulation protocol with lower gonadotropin used is likely to be considered as a patient- friendly and cost-effective substitute for PORs.
-
Mohsen, Iman Abdel; El Din, Rasha Ezz
2013-02-01
To compare the IVF outcomes of letrozole/antagonist and microdose GnRH agonist flare up protocols in poor ovarian responders undergoing intracytoplasmic sperm injection. A randomized controlled trial was performed in patients with one or more previous failed IVF cycles in which four or less oocytes were retrieved when the gonadotrophin starting dose was at least 300 IU/day. Sixty patients were randomized by computer-generated list to receive either letrozole/antagonist (mild stimulation) n = 30 or GnRH-a protocol (microdose flare) n = 30. Both groups were similar with respect to background and hormonal characteristics (age, duration of infertility, BMI, FSH, LH and E2). The clinical pregnancy rate per cycle was similar in both groups (13.3 vs. 16.6%; OR = 0.769; 95% CI = 0.185, 3.198). The doses of used gonadotropins and the number of stimulation days were significantly lower in the letrozole/antagonist protocol. The peak E2 level on the day of hCG, the endometrial thickness, the retrieved oocytes, the number of fertilized oocytes, the number of transferred embryos and the cancellation rate were statistically similar in both groups. The letrozole/antagonist protocol is a cost-effective and patient-friendly protocol that may be used in poor ovarian responders for IVF/ICSI.
-
International Nuclear Information System (INIS)
Percebois, Jacques; Wright, Philip
2001-01-01
Particularly because a preoccupation with process has tended to dominate the debate about electricity privatisation and liberalisation, this paper focuses on price outcomes by comparing the relative price performance of the French and UK electricity industries between 1990 and 2000. The main conclusion is that in 1990 the state-owned French electricity industry was performing better for most consumers than the state-owned UK industry, and a decade later it was still doing so with respect to the privately-owned UK industry. While this conclusion could be qualified by saying that, heavily prompted or assisted by the Regulator, the UK privately-owned industry has shown itself capable of achieving faster reductions in prices to close the gap between itself and the French, this achievement has been concentrated in the industrial market and even there the very significant gains were mainly restricted to the very largest consumers. In the context of the European Union the UK is shown to have performed relatively poorly for the smallest domestic consumers and, while both countries did much better in the rankings of industrial prices, they were still a long way behind the top performers. (Author)
-
Selection application for platforms and security protocols suitable for wireless sensor networks
International Nuclear Information System (INIS)
Moeller, S; Newe, T; Lochmann, S
2009-01-01
There is a great number of platforms and security protocols which can be used for wireless sensor networks (WSN). All these platforms and protocols have different properties with certain advantages and disadvantages. For a good choice of platform and an associated protocol, these advantages and disadvantages should be compared and the best for the appropriate WSN chosen. To select a Security protocol and a wireless platform suitable for a specific application a software tool will be developed. That tool will enable wireless network deployment engineers to easily select a suitable wireless platform for their application based on their network needs and application security requirements.
-
Security Protocols in a Nutshell
Toorani, Mohsen
2016-01-01
Security protocols are building blocks in secure communications. They deploy some security mechanisms to provide certain security services. Security protocols are considered abstract when analyzed, but they can have extra vulnerabilities when implemented. This manuscript provides a holistic study on security protocols. It reviews foundations of security protocols, taxonomy of attacks on security protocols and their implementations, and different methods and models for security analysis of pro...
-
Data aggregation in wireless sensor networks using the SOAP protocol
International Nuclear Information System (INIS)
Al-Yasiri, A; Sunley, A
2007-01-01
Wireless sensor networks (WSN) offer an increasingly attractive method of data gathering in distributed system architectures and dynamic access via wireless connectivity. Wireless sensor networks have physical and resource limitations, this leads to increased complexity for application developers and often results in applications that are closely coupled with network protocols. In this paper, a data aggregation framework using SOAP (Simple Object Access Protocol) on wireless sensor networks is presented. The framework works as a middleware for aggregating data measured by a number of nodes within a network. The aim of the study is to assess the suitability of the protocol in such environments where resources are limited compared to traditional networks
-
Data aggregation in wireless sensor networks using the SOAP protocol
Energy Technology Data Exchange (ETDEWEB)
Al-Yasiri, A; Sunley, A [School of Computing, Science and Engineering, University of Salford, Greater Manchester, M5 4WT (United Kingdom)
2007-07-15
Wireless sensor networks (WSN) offer an increasingly attractive method of data gathering in distributed system architectures and dynamic access via wireless connectivity. Wireless sensor networks have physical and resource limitations, this leads to increased complexity for application developers and often results in applications that are closely coupled with network protocols. In this paper, a data aggregation framework using SOAP (Simple Object Access Protocol) on wireless sensor networks is presented. The framework works as a middleware for aggregating data measured by a number of nodes within a network. The aim of the study is to assess the suitability of the protocol in such environments where resources are limited compared to traditional networks.
-
Bishop-Williams, Katherine E; Sargeant, Jan M; Berrang-Ford, Lea; Edge, Victoria L; Cunsolo, Ashlee; Harper, Sherilee L
2017-01-26
Acute respiratory infections (ARI) are a leading cause of morbidity and mortality globally, and are often linked to seasonal and/or meteorological conditions. Globally, Indigenous peoples may experience a different burden of ARI compared to non-Indigenous peoples. This protocol outlines our process for conducting a systematic review to investigate whether associations between ARI and seasonal or meteorological parameters differ between Indigenous and non-Indigenous groups residing in the same geographical region. A search string will be used to search PubMed ® , CAB Abstracts/CAB Direct © , and Science Citation Index ® aggregator databases. Articles will be screened using inclusion/exclusion criteria applied first at the title and abstract level, and then at the full article level by two independent reviewers. Articles maintained after full article screening will undergo risk of bias assessment and data will be extracted. Heterogeneity tests, meta-analysis, and forest and funnel plots will be used to synthesize the results of eligible studies. This protocol paper describes our systematic review methods to identify and analyze relevant ARI, season, and meteorological literature with robust reporting. The results are intended to improve our understanding of potential associations between seasonal and meteorological parameters and ARI and, if identified, whether this association varies by place, population, or other characteristics. The protocol is registered in the PROSPERO database (#38051).
-
International Nuclear Information System (INIS)
Chepurnov, A.S.; Orekhov, D.I.; Maimistov, D.A.; Sabelnikov, A.A.; Etenko, A.V.
2006-01-01
Monitoring of PMT dark noise in a neutrino detector BOREXINO is a procedure that indicates condition of the detector. Based on CAN industrial network, top level DeviceNet protocol and WEB visualization, the dark noise monitoring system having 256 channels for the internal detector and for the external muon veto was created. The system is composed as a set of controllers, converting the PMT signals to frequency and transmitting them over Can network. The software is the stack of the DeviceNet protocols, providing the data collecting and transporting. Server-side scripts build web pages of user interface and graphical visualization of data
-
Directory of Open Access Journals (Sweden)
Usman Ali
2018-06-01
Full Text Available Climate change is a global phenomenon occurring throughout the world. Greenhouse gases (GHGs especially carbon dioxide (CO2 considered to be the major culprit to bring these changes. So, carbon (C sequestration by any mean could be useful to reduce the CO2 level in atmosphere. Turf grasses have the ability to sequester C and minimize the effects of GHGs on the environment. In order to study that how turf grasses can help in C sequestration, Bermuda grass (Cynodon dactylon was grown both at industrial and urban location and its effect on C storage were assessed by soil and plant analysis. Dry deposition of ammonium and nitrate was maximum at both locations through the year. However wet deposition was highest during the months of high rainfall. It was examined through soil analysis that soil organic matter, soil C and nitrogen in both locations increased after second mowing of grass. However, soil pH 6.68 in urban and 7.00 in industrial area and EC 1.86 dS/m in urban and 1.90 dS/m in industrial area decreased as the grass growth continue. Soil fresh weight (27.6 g in urban and (27.28 g industrial area also decreased after first and second mowing of grass. The C levels in plant dry biomass also increased which showed improved ability of plant to uptake C from the soil and store it. Similarly, chlorophyll contents were more in industrial area compared to urban area indicates the positive impact of high C concentration. Whereas stomatal conductance was reduced in high C environment to slow down respiration process. Hence, from present study it can be concluded that the Bermuda grass could be grown in areas with high C concentration in atmosphere for sequestrating C in soil.
-
What to look for when selecting ANSI protocol meters
Energy Technology Data Exchange (ETDEWEB)
York, T.
2001-09-01
A large number of major manufacturers now offer American National Standards Institute (ANSI) protocol meters, with ever improving capabilities. It is now time to consider ANSI Protocol Meters (APM). One of the advantages of the industry moving toward APMs is the fact that the eventual exclusion of proprietary technology should accelerate and additional software tools should become available to fully support APMs. The emphasis on the part of suppliers and potential users must now be placed on the acquisition of metering products that provide maximum benefits. The proper evaluation of APM will provide valuable feedback to the meter manufacturers, which in turn will encourage the development of new and improved metering products to increase productivity. The customers should be mindful of the following: insist on end device language files, and look for product flexibility. Other interesting features are: billing data (so it can be presented in standard format), present values (for inclusion of instrumentation measurements for quick retrieval by the customer), interval data recording, security features, user defined tables, logging, and power quality monitoring. 1 fig.
-
The impact of an ED-only full-capacity protocol.
Watase, Taketo; Fu, Rongwei; Foster, Denise; Langley, Denise; Handel, Daniel A
2012-10-01
The objective of this study was to assess the impact of an emergency department (ED)-only full-capacity protocol and diversion, controlling for patient volumes and other potential confounding factors. This was a preintervention and postintervention cohort study using data 12 months before and 12 months after the implementation of the protocol. During the implementation period, attending physicians and charge nurses were educated with clear and simple figures on the criteria for the initiation of the new protocol. A multiple logistic regression model was used to compare ambulance diversion between the 2 periods. The proportion of days when the ED went on diversion at least once during a 24-hour period was 60.4% during the preimplementation period and 20% in the postimplementation periods (P model, the use of the new protocol was significantly associated with decreased odds of diversion rate in the postimplementation period (odds ratio, 0.32; 95% confidence interval, 0.21-0.48). Our predivert/full-capacity protocol is a simple and generalizable strategy that can be implemented within the boundaries of the ED and is significantly associated with a decreased diversion rate. Copyright © 2012 Elsevier Inc. All rights reserved.
-
2011-02-03
... this document is to provide sponsors guidance in preparation of study protocols for review by the Center for Veterinary Medicine (CVM), Office of New Animal Drug Evaluation (ONADE), to reduce the time to... Development and Submission.'' The purpose of this document is to provide sponsors guidance in preparation of...
-
Comparison of dose and image quality in protocols abdominal CT using high an low KVP
International Nuclear Information System (INIS)
Mas Munoz, I.; Alejo Luque, L.; Corredoira Silva, E.; Sanchez Munoz, F. J.; Serrada Hierro, A.
2013-01-01
This paper compares quantitatively low kV Protocol with the conventional Protocol of abdomen, analysing the image quality with objective physical parameters and calculating the corresponding dummy dose reduction. (Author)
-
Directory of Open Access Journals (Sweden)
Dorota Jeziorowska
2017-06-01
Full Text Available Human induced pluripotent stem cells (iPSCs represent a powerful human model to study cardiac disease in vitro, notably channelopathies and sarcomeric cardiomyopathies. Different protocols for cardiac differentiation of iPSCs have been proposed either based on embroid body formation (3D or, more recently, on monolayer culture (2D. We performed a direct comparison of the characteristics of the derived cardiomyocytes (iPSC-CMs on day 27 ± 2 of differentiation between 3D and 2D differentiation protocols with two different Wnt-inhibitors were compared: IWR1 (inhibitor of Wnt response or IWP2 (inhibitor of Wnt production. We firstly found that the level of Troponin T (TNNT2 expression measured by FACS was significantly higher for both 2D protocols as compared to the 3D protocol. In the three methods, iPSC-CM show sarcomeric structures. However, iPSC-CM generated in 2D protocols constantly displayed larger sarcomere lengths as compared to the 3D protocol. In addition, mRNA and protein analyses reveal higher cTNi to ssTNi ratios in the 2D protocol using IWP2 as compared to both other protocols, indicating a higher sarcomeric maturation. Differentiation of cardiac myocytes with 2D monolayer-based protocols and the use of IWP2 allows the production of higher yield of cardiac myocytes that have more suitable characteristics to study sarcomeric cardiomyopathies.
-
Directory of Open Access Journals (Sweden)
Mahmoud M. Gabr
2014-01-01
Full Text Available Introduction. Many protocols were utilized for directed differentiation of mesenchymal stem cells (MSCs to form insulin-producing cells (IPCs. We compared the relative efficiency of three differentiation protocols. Methods. Human bone marrow-derived MSCs (HBM-MSCs were obtained from three insulin-dependent type 2 diabetic patients. Differentiation into IPCs was carried out by three protocols: conophylline-based (one-step protocol, trichostatin-A-based (two-step protocol, and β-mercaptoethanol-based (three-step protocol. At the end of differentiation, cells were evaluated by immunolabeling for insulin production, expression of pancreatic endocrine genes, and release of insulin and c-peptide in response to increasing glucose concentrations. Results. By immunolabeling, the proportion of generated IPCs was modest (≃3% in all the three protocols. All relevant pancreatic endocrine genes, insulin, glucagon, and somatostatin, were expressed. There was a stepwise increase in insulin and c-peptide release in response to glucose challenge, but the released amounts were low when compared with those of pancreatic islets. Conclusion. The yield of functional IPCs following directed differentiation of HBM-MSCs was modest and was comparable among the three tested protocols. Protocols for directed differentiation of MSCs need further optimization in order to be clinically meaningful. To this end, addition of an extracellular matrix and/or a suitable template should be attempted.
-
Business protocol in integrated Europe
Pavelová, Nina
2009-01-01
The first chapter devotes to definitions of basic terms such as protocol or business protocol, to differences between protocol and etiquette, and between social etiquette and business etiquette. The second chapter focuses on the factors influencing the European business protocol. The third chapter is devoted to the etiquette of business protocol in the European countries. It touches the topics such as punctuality and planning of business appointment, greeting, business cards, dress and appear...
-
International Nuclear Information System (INIS)
Meleo, Linda
2014-01-01
The European Union Emission Trading Scheme (EU-ETS) represents the masterpiece that the EU adopted to achieve the Kyoto Protocol and “Europe 2020” strategy goals of reducing greenhouse gas (GHG). Although the EU-ETS is designed “in order to promote reductions of greenhouse gas emissions in a cost-effective and economically efficient manner” and “without prejudice for the Treaty”, the system has become a concern issue for firms and industries over competitiveness in European and international markets in addition to carbon leakage. This paper analyses whether and to what extent the EU-ETS may harm competitiveness, by following a qualitative approach, and presenting the case of the Italian paper industry, included in the system as an energy-intensive sector. More specifically, first the paper identifies those key factors that provide a qualitative measure of the “competitiveness risk” related to the EU-ETS; then, those factors are used to examine the Italian paper industry and to assess the actual and potential risks affecting the sector. This analysis is of interest given the lack of similar studies on the Italian paper industry and represents a starting point to serve further studies and future policymaking in Italy and Europe. - Highlights: • The European Emission Trading Scheme (EU-ETS) and the effects on the Italian paper industry competitiveness. • Key factors that provide a measure of the “competitiveness risk” for the Italian paper industry. • Those risks are limited at the moment, but some factors need to be carefully managed, such as electricity uses and prices. • Industrial policies and new firms strategies are required to manage the “competitiveness risk” in the coming years
-
Global property rights. The Kyoto protocol and the knowledge revolution
International Nuclear Information System (INIS)
Chichilnisky, G.
2006-01-01
This paper is about the origin of today's global environmental problems, and how to resolve them. At stake are catastrophic risks from global warming and damage to the world's biodiversity that ranks as the planet' sixth great extinction. The origin of today's global environmental problems is a historic difference in property rights regimes between industrial and developing countries, the North and the South. The solutions we suggest involve redefining property rights in the use of the global environment as well as in knowledge. We discuss the Kyoto Protocol's new systems of property rights on the use of the planet's atmosphere, and propose a parallel system of property rights on knowledge. Resources such as forests and oil and other mineral deposits are owned as private property in industrial countries but they are treated as common or government property in developing countries. Ill-defined protected property rights lead to the over-extraction of resources in the South, such as timber and oil. They are exported at low prices to the North that over-consumes them. The international market amplifies the tragedy of the commons, leading to inferior solutions for the world economy as a whole (Chichilnisky 1994). Updating property rights on resources in developing countries would face formidable opposition. The lack of property rights in inputs to production, such as timber and oil, could be compensated by assigning property rights on by-products of outputs. The 1997 Kyoto Protocol provides an example as it limits the countries' rights to emit carbon, a by-product of burning fossil fuels. Our suggestions for trading emissions rights (Chichilnisky 1995, 96) was adopted in the Kyoto Protocol, yet the atmosphere's carbon concentration is a global public good, which makes trading tricky. Trading rights to forests' carbon sequestration services or to genetic blueprints would also be trading global public goods. Markets that trade public goods have been shown to require a
-
A robust ECC based mutual authentication protocol with anonymity for session initiation protocol.
Mehmood, Zahid; Chen, Gongliang; Li, Jianhua; Li, Linsen; Alzahrani, Bander
2017-01-01
Over the past few years, Session Initiation Protocol (SIP) is found as a substantial application-layer protocol for the multimedia services. It is extensively used for managing, altering, terminating and distributing the multimedia sessions. Authentication plays a pivotal role in SIP environment. Currently, Lu et al. presented an authentication protocol for SIP and profess that newly proposed protocol is protected against all the familiar attacks. However, the detailed analysis describes that the Lu et al.'s protocol is exposed against server masquerading attack and user's masquerading attack. Moreover, it also fails to protect the user's identity as well as it possesses incorrect login and authentication phase. In order to establish a suitable and efficient protocol, having ability to overcome all these discrepancies, a robust ECC-based novel mutual authentication mechanism with anonymity for SIP is presented in this manuscript. The improved protocol contains an explicit parameter for user to cope the issues of security and correctness and is found to be more secure and relatively effective to protect the user's privacy, user's masquerading and server masquerading as it is verified through the comprehensive formal and informal security analysis.
-
A robust ECC based mutual authentication protocol with anonymity for session initiation protocol.
Directory of Open Access Journals (Sweden)
Zahid Mehmood
Full Text Available Over the past few years, Session Initiation Protocol (SIP is found as a substantial application-layer protocol for the multimedia services. It is extensively used for managing, altering, terminating and distributing the multimedia sessions. Authentication plays a pivotal role in SIP environment. Currently, Lu et al. presented an authentication protocol for SIP and profess that newly proposed protocol is protected against all the familiar attacks. However, the detailed analysis describes that the Lu et al.'s protocol is exposed against server masquerading attack and user's masquerading attack. Moreover, it also fails to protect the user's identity as well as it possesses incorrect login and authentication phase. In order to establish a suitable and efficient protocol, having ability to overcome all these discrepancies, a robust ECC-based novel mutual authentication mechanism with anonymity for SIP is presented in this manuscript. The improved protocol contains an explicit parameter for user to cope the issues of security and correctness and is found to be more secure and relatively effective to protect the user's privacy, user's masquerading and server masquerading as it is verified through the comprehensive formal and informal security analysis.
-
Voluntary initiatives for managing greenhouse gas emissions : How is industry doing?
International Nuclear Information System (INIS)
Peirce, C.
1998-01-01
This paper attempted to show that energy industries in Canada have been constructively engaged in global warming issues of legitimate concern to Canadians for many years. As an example, the Canadian Association of Petroleum Producers (CAPP) was the first industry association to commit to the Voluntary Challenge and Registry (VCR) program to stabilize greenhouse gas emissions at 1990 levels by year 2000. CAPP supports improvements in energy efficiency, conservation, research, public education and technology transfer to developing countries. Since the VCR program was implemented in 1995, industry has reduced emissions by almost nine million tonnes. The implications of the Kyoto Protocol for Canada were also reviewed. It was stated that achieving the target of 20-25 per cent reductions from 'business as usual' by 2008-2012 will affect all energy consumers in all regions of the country. It was emphasized that it will be crucial to encourage action before 2008. In evolving from the present voluntary action to flexible but binding action it will be necessary to clearly define credit for early action, promote research and technology, focus on Canadian needs in designing flexibility instruments. The flexibility instruments in the Kyoto Protocol are: (1) emissions trading within annex 1 countries, (2) a clean development mechanism, and (3) carbon sinks. All of these instruments have been ill-defined up-to-now and there is much uncertainty regarding rules, modalities and guidelines
-
Santos, Thaís Helena Ferreira; Barbosa, Milene Rossi Pereira; Pimentel, Ana Gabriela Lopes; Lacerda, Camila Andrioli; Balestro, Juliana Izidro; Amato, Cibelle Albuquerque de la Higuera; Fernandes, Fernanda Dreux Miranda
2012-01-01
To compare the results obtained in the Autism Behavior Checklist with those obtained in the Childhood Autism Rating Scale to identify and characterize children with Autism Spectrum Disorders. Participants were 28 children with psychiatric diagnosis within the autism spectrum that were enrolled in language therapy in a specialized service. These children were assessed according to the Autism Behavior Checklist and Childhood Autism Rating Scale criteria, based on information obtained with parents and therapists, respectively. Data were statistically analyzed regarding the agreement between responses. Results indicating high or moderate probability of autism in the Autism Behavior Checklist were considered concordant with the results indicating mild-to-moderate or severe autism in the Childhood Autism Rating Scale. Results indicating low probability of autism in the Autism Behavior Checklist and without autism in the Childhood Autism Rating Scale were also considered concordant. There was agreement on most of the responses. Cases in which there was disagreement between results obtained on both protocols corroborate literature data, showing that the instruments may not be sufficient, if applied alone, to define the diagnosis. The Childhood Autism Rating Scale may not effectively diagnose autistic children, while the Autism Behavior Checklist may result in over- diagnose, including within the autism spectrum children with other disorders. Therefore, the associated use of both protocols is recommended.
-
Wiß, Tobias
2017-12-01
Although studies have examined the distribution and conditions of employer-provided work-family arrangements, we still lack a systematic investigation of how these vary for different countries and industries. Based on the European Working Conditions Survey 2010, this study examines the conditions under which firms provide family-friendly working time arrangements and what the differences are across four countries (Austria, Denmark, Italy and the UK) and four industries. The impact of employee representatives, employee involvement, manager support and female managers varies across countries and industries because of the institutional environment (prevailing family model, industrial relations) and workforce composition (gender). The impact of employee representatives depends on their co-determination rights, and the direction of their effect on the prevailing family model (e.g. negative in conservative countries such as Austria) and the gender composition of the workforce (negative in male-dominated production, but positive in services). Employee involvement in the work organization is significantly positive in Austria and Denmark (both with co-operative industrial relations), while manager support has the strongest effect in the UK (liberal regime). At the industry level, female supervisors are positively associated with family-friendly working time arrangements only in the male-dominated production industry. These findings suggest that the effects of agency variables and their direction vary depending on the institutional context.
-
2016-01-01
Abstract Although studies have examined the distribution and conditions of employer‐provided work–family arrangements, we still lack a systematic investigation of how these vary for different countries and industries. Based on the European Working Conditions Survey 2010, this study examines the conditions under which firms provide family‐friendly working time arrangements and what the differences are across four countries (Austria, Denmark, Italy and the UK) and four industries. The impact of employee representatives, employee involvement, manager support and female managers varies across countries and industries because of the institutional environment (prevailing family model, industrial relations) and workforce composition (gender). The impact of employee representatives depends on their co‐determination rights, and the direction of their effect on the prevailing family model (e.g. negative in conservative countries such as Austria) and the gender composition of the workforce (negative in male‐dominated production, but positive in services). Employee involvement in the work organization is significantly positive in Austria and Denmark (both with co‐operative industrial relations), while manager support has the strongest effect in the UK (liberal regime). At the industry level, female supervisors are positively associated with family‐friendly working time arrangements only in the male‐dominated production industry. These findings suggest that the effects of agency variables and their direction vary depending on the institutional context. PMID:29242672
-
RSRP: A Robust Secure Routing Protocol in MANET
Directory of Open Access Journals (Sweden)
Sinha Ditipriya
2014-05-01
Full Text Available In this paper, we propose a novel algorithm RSRP to build a robust secure routing protocol in mobile ad-hoc networks (MANETs. This algorithm is based on some basic schemes such as RSA_CRT for encryption and decryption of messages; CRT for safety key generation, Shamir’s secret sharing principle for generation of secure routes. Those routes which are free from any malicious node and which belong to the set of disjoint routes between a source-destination pair are considered as probable routes. Shamir’s secret sharing principle is applied on those probable routes to obtain secure routes. Finally, most trustworthy and stable route is selected among those secure routes. Selection of the final route depends on some criteria of the nodes present in a route e.g.: battery power, mobility and trust value. In addition, complexity of key generation is reduced to a large extent by using RSA-CRT instead of RSA. In turn, the routing becomes less expensive and most secure and robust one. Performance of this routing protocol is then compared with non-secure routing protocols (AODV and DSR, secure routing scheme using secret sharing, security routing protocol using ZRP and SEAD depending on basic characteristics of these protocols. All such comparisons show that RSRP shows better performance in terms of computational cost, end-to-end delay and packet dropping in presence of malicious nodes in the MANET, keeping the overhead in terms of control packets same as other secure routing protocols.
-
About the Design of QUIC Firefox Transport Protocol
Directory of Open Access Journals (Sweden)
Vraj Pandya
2017-07-01
Full Text Available QUIC (Quick UDP Internet Connections Chrome is an experimental transport layer network protocol designed by Jim Roskind at Google, initially implemented in 2012 and announced publicly in 2013. One of the QUIC's goals is to improve performance of connection-oriented web applications that are currently using the Transmission Control Protocol (TCP. To do that, QUIC achieves a reduced latency and a better stream-multiplexing support to avoid network congestion. In 2015, Firefox Mozilla started to work on an equivalent QUIC transport protocol for their browser. This idea was motivated by the differences between Chrome and Firefox. Despite the fact that Mozilla Firefox and Google Chrome are both web browser engines, there are some significant differences between them, such as file hierarchy, open source policies (Firefox is completely, while Chrome is only partial, tabs design, continuous integration, and more. Likewise QUIC Chrome, QUIC Firefox is a new multiplexed and secure transport based on User Datagram Protocol (UDP, designed from the ground up and optimized for Hyper-Text Transfer Protocol 2 (HTTP/2 semantics. While built with HTTP/2 as the primary application protocol, QUIC builds on decades of transport and security experience, and implements mechanisms that make it attractive as a modern general-purpose transport. In addition to describing the main design of QUIC Firefox, this paper will compare Firefox with QUIC Firefox. Our preliminary experimental results support that QUIC Firefox has a faster execution time, less latency time, and a better throughput time than the traditional Firefox.
-
Refining capacity in Quebec : the Quebec market, industry viewpoint
International Nuclear Information System (INIS)
Trudelle, F.
2004-01-01
Canada's second largest oil refinery is operated by Ultramar Ltd. in Levis, Quebec. The refinery, which supplies 45 per cent of all Quebec's petroleum, distributes its products to Quebec, Ontario and the Maritime provinces. The refinery currently produces 215,000 barrels per day. Ultramar is a division of Valero, an American firm which has a total refining capacity of 2.4 million barrels per day. A summary of the company's petroleum energy distribution, consumption, and reserves was presented and compared with the national and global position. It was noted that world demand for petroleum products increases yearly by 1 to 1.5 per cent while the demand for automobile fuel in North America increases by 2.5 to 3.5 per cent. In the last 10 years, world demand has increased by more than 22 per cent but refining capacity has only increased by 12 per cent. The average profitability of the refining industry from 1992 to 2002 was approximately 5.5 per cent, which limited investments in new refinery installations. Much of the industry's profits have been utilized to modify installations in order to reduce the sulphur content in gasoline and diesel fuels. Furthermore, the obtention of permits to construct new refining installations has become a major obstacle and the ratification of the Kyoto Protocol may signify a 30 per cent reduction in automotive fuel demand. Given this, there is currently some hesitation and uncertainty by the refining industry to proceed with new major installations. tabs., figs
-
Directory of Open Access Journals (Sweden)
Downes Michael A
2010-06-01
Full Text Available Abstract Background Acute behavioural disturbance (ABD is an increasing problem in emergency departments. This study aimed to determine the impact of a structured intramuscular (IM sedation protocol on the duration of ABD in the emergency department. Methods A historical control study was undertaken comparing 58 patients who required physical restraint and parenteral sedation with the structured IM sedation protocol, to 73 historical controls treated predominantly by intravenous sedation, according to individual clinician preference. The primary outcome was the duration of the ABD defined as the time security staff were required. Secondary outcomes were the requirement for additional sedation, drug related-adverse effects and patient and staff injuries. Results The median duration of the ABD in patients with the new sedation protocol was 21 minutes (IQR: 15 to 35 minutes; Range: 5 to 78 minutes compared to a median duration of 30 minutes (IQR: 15 to 50 minutes; Range: 5 to 135 minutes in the historical controls which was significantly different (p = 0.03. With IM sedation only 27 of 58 patients (47%; 95% CI: 34% to 60% required further sedation compared to 64 of 73 historical controls (88%; 95%CI: 77% to 94%. There were six (10% drug-related adverse events with the new IM protocol [oxygen desaturation (5, oxygen desaturation/airway obstruction (1] compared to 10 (14% in the historical controls [oxygen desaturation (5, hypoventilation (4 and aspiration (1]. Injuries to staff occurred with three patients using the new sedation protocol and in seven of the historical controls. Two patients were injured during the new protocol and two of the historical controls. Conclusion The use of a standardised IM sedation protocol was simple, more effective and as safe for management of ABD compared to predominantly intravenous sedation.
-
Power Saving MAC Protocols for WSNs and Optimization of S-MAC Protocol
Directory of Open Access Journals (Sweden)
Simarpreet Kaur
2012-11-01
Full Text Available Low power MAC protocols have received a lot of consideration in the last few years because of their influence on the lifetime of wireless sensor networks. Since, sensors typically operate on batteries, replacement of which is often difficult. A lot of work has been done to minimize the energy expenditure and prolong the sensor lifetime through energy efficient designs, across layers. Meanwhile, the sensor network should be able to maintain a certain throughput in order to fulfill the QoS requirements of the end user, and to ensure the constancy of the network. This paper introduces different types of MAC protocols used for WSNs and proposes S‐MAC, a Medium‐Access Control protocol designed for Wireless Sensor Networks. S‐MAC uses a few innovative techniques to reduce energy consumption and support selfconfiguration. A new protocol is suggested to improve the energy efficiency, latency and throughput of existing MAC protocol for WSNs. A modification of the protocol is then proposed to eliminate the need for some nodes to stay awake longer than the other nodes which improves the energy efficiency, latency and throughput and hence increases the life span of a wireless sensor network.
-
An efficient three-party password-based key agreement protocol using extended chaotic maps
International Nuclear Information System (INIS)
Shu Jian
2015-01-01
Three-party password-based key agreement protocols allow two users to authenticate each other via a public channel and establish a session key with the aid of a trusted server. Recently, Farash et al. [Farash M S, Attari M A 2014 “An efficient and provably secure three-party password-based authenticated key exchange protocol based on Chebyshev chaotic maps”, Nonlinear Dynamics 77(7): 399–411] proposed a three-party key agreement protocol by using the extended chaotic maps. They claimed that their protocol could achieve strong security. In the present paper, we analyze Farash et al.’s protocol and point out that this protocol is vulnerable to off-line password guessing attack and suffers communication burden. To handle the issue, we propose an efficient three-party password-based key agreement protocol using extended chaotic maps, which uses neither symmetric cryptosystems nor the server’s public key. Compared with the relevant schemes, our protocol provides better performance in terms of computation and communication. Therefore, it is suitable for practical applications. (paper)
-
An Efficient Wireless Sensor Network for Industrial Monitoring and Control.
Aponte-Luis, Juan; Gómez-Galán, Juan Antonio; Gómez-Bravo, Fernando; Sánchez-Raya, Manuel; Alcina-Espigado, Javier; Teixido-Rovira, Pedro Miguel
2018-01-10
This paper presents the design of a wireless sensor network particularly designed for remote monitoring and control of industrial parameters. The article describes the network components, protocol and sensor deployment, aimed to accomplish industrial constraint and to assure reliability and low power consumption. A particular case of study is presented. The system consists of a base station, gas sensing nodes, a tree-based routing scheme for the wireless sensor nodes and a real-time monitoring application that operates from a remote computer and a mobile phone. The system assures that the industrial safety quality and the measurement and monitoring system achieves an efficient industrial monitoring operations. The robustness of the developed system and the security in the communications have been guaranteed both in hardware and software level. The system is flexible and can be adapted to different environments. The testing of the system confirms the feasibility of the proposed implementation and validates the functional requirements of the developed devices, the networking solution and the power consumption management.
-
Cooling Tower (Evaporative Cooling System) Measurement and Verification Protocol
Energy Technology Data Exchange (ETDEWEB)
Kurnik, Charles W. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Boyd, Brian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stoughton, Kate M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lewis, Taylor [Colorado Energy Office, Denver, CO (United States)
2017-12-05
This measurement and verification (M and V) protocol provides procedures for energy service companies (ESCOs) and water efficiency service companies (WESCOs) to determine water savings resulting from water conservation measures (WCMs) in energy performance contracts associated with cooling tower efficiency projects. The water savings are determined by comparing the baseline water use to the water use after the WCM has been implemented. This protocol outlines the basic structure of the M and V plan, and details the procedures to use to determine water savings.
-
Aparicio, Virginia; Zamora, Martin; Barbera, Agustin; Castro Franco, Mauricio; Domenech, Marisa; De Geronimo, Eduardo; Costa, Jose Luis
2017-04-01
The industrial model of agriculture, defined here by its capital intensity and dependence on massive inputs like seeds, fertilizer, and pesticides, is reducing soil organic matter and increasing the inefficiency in agrochemical used. Ecological impacts of industrial agriculture include pollution by pesticides, soil organic matter loss and soil degradation, among many others, with the consequent human health risks. Many of the negative effects of industrial agriculture are remote from fields and farms. The impacts of industrial agriculture on the environment, public health, and rural communities make it an unsustainable way to grow our food over the long term. An alternative approach to the industrial agriculture is the agroecology which has shown promising success on the ground and is actually the only way to ensure that all people have access to sufficient, healthful food. Farming systems designed and managed according to ecological principles can meet the food needs of society while addressing these pressing environmental and social issues. Our concept of agroecological transition is based on increasing resource use efficiency (e.g. fertilizer, pesticides and water), recycling waste or byproducts of one subsystem in another and applying sound? agricultural practices or precision-agriculture technologies. The objective of this work was to compare two production systems: a) industrial agriculture, b) agroecological transition with respect to the impact on the glyphosate load and the organic matter content in the soil and its distribution in depth. The study sites were two field of 15 ha each located at Barrow Experimental Station (38°19´S, 60°15´W). Soil ECa mapping was carried out and the complete experimental area was divided in three ECa classes with similar soil characteristics. Therefore, soil sampling was carried out by zones, based on three ECa classes at each production systems. Soil samples were taken at 0-2, 2-5, 5-10, 10-20, 20-30 and 30-40 cm depth
-
Enhanced just-in-time plus protocol for optical burst switching networks
Rodrigues, Joel J. P. C.; Gregório, José M. B.; Vasilakos, Athanasios V.
2010-07-01
We propose a new one-way resource reservation protocol for optical burst switching (OBS) networks, called Enhanced Just-in-Time Plus (E-JIT+). The protocol is described in detail, and its formal specification is presented, following an extended finite state machine approach. The performance evaluation of E-JIT+ is analyzed in comparison with other proposed OBS protocols (JIT+ and E-JIT) for the following network topologies: rings; degree-two, degree-three, and degree-four chordal rings; mesh-torus; NSFNET; ARPANET; FCCN-NET; and the European Optical Network. We evaluate and compare the performance of the different protocols in terms of burst loss probability, taking into account the most important OBS network parameters. It was shown that E-JIT+ performs better than available one-way resource reservation protocols for all the evaluated network topologies. Moreover, the scalability of E-JIT+ was observed, and when the network traffic increases, the burst loss probability also increases, leading to a worse network performance.
-
Rosito, G; Sum, K; Chorne, N
2010-10-01
Indomethacin, a non-selective inhibitor of prostaglandin synthesis, is the gold standard treatment for patent ductus arteriosus (PDA). Indomethacin has been shown to permanently close the ductus and when given prophylactically, it reduces the incidence of PDA (1, 2). This study compares PDA closure and surgical ligation rates between patients using two different indomethacin administration protocols. This is a retrospective comparison analysis of 72 neonates, who received one of two indomethacin administration protocols. Our previous protocol suggested an initial dose of 0·2 mg/kg followed by two 0·1 mg/kg, with doses infused over 4 h and a 24-h dosing interval. A new potentially more useful protocol using the same mg/kg dose regimen but with doses infused over 30 min and a 12-h dosing interval, was evaluated. Each neonate was allowed three courses of treatment before surgical ligation was performed for persistent PDA. There were no statistically significant differences between the two protocol groups when comparing percentages of neonates with gestational age≤28 weeks, birth weight≤1000 g, male gender or receiving indomethacin for the indication of PDA prophylaxis vs. treatment. There was a trend towards a higher PDA closure rate and subsequently a lower PDA ligation rate in the new protocol when compared with the previous protocol. In this small population of premature neonates, there was a trend, but no significant difference, towards increasing PDA closure and lower surgical ligation rates in neonates given indomethacin with more frequent dosing and shorter infusion time. A well-powered randomized controlled trial is now needed. Copyright © 2010 The Authors. JCPT © 2010 Blackwell Publishing Ltd.
-
Comparative life cycle assessment of industrial multi-product processes
Jung, Johannes
2014-01-01
The demand for environmentally safe industrial processes is increasing. Therefore, environmental impacts of new processes have to be examined at an early stage. A method for analyzing environmental impacts is life cycle assessment (LCA). A major trouble of LCA are multi-functionality problems. Multi-functionality problems can be fixed using alternative methods such as system expansion, avoided burden and allocation. Each of the three methods requires choices by the LCA-practitioner. The choic...
-
Carbon dioxide emissions and climate change: policy implications for the cement industry
International Nuclear Information System (INIS)
Rehan, R.; Nehdi, M.
2005-01-01
There is growing awareness that the cement industry is a significant contributor to global carbon dioxide (CO 2 ) emissions. It is expected that this industry will come under increasing regulatory pressures to reduce its emissions and contribute more aggressively to mitigating global warming. It is important that the industry's stakeholders become more familiar with greenhouse gas (GHG) emission and associated global warming issues, along with emerging policies that may affect the future of the industry. This paper discusses climate change, the current and proposed actions for mitigating its effects, and the implications of such actions for the cement industry. International negotiations on climate change are summarized and mechanisms available under the Kyoto Protocol for reducing greenhouse gas emissions are explained. The paper examines some of the traditional and emerging policy instruments for greenhouse gas emissions and analyses their merits and drawbacks. The applicability, effectiveness and potential impact of these policy instruments for the global cement industry in general and the Canadian cement industry in particular are discussed with recommendations for possible courses of action
-
Bunch, Azalea Marie; Leasure, A Renee; Carithers, Cathrin; Burnette, Robert E; Berryman, Michael Scott
2016-02-01
The purpose of this quality improvement (QI) project is to compare the effectiveness of a rapid 90-min chest pain screening and evaluation protocol to a 120-min screening and evaluation protocol in determining patient readiness for hospital admission or discharge home. The existing chest pain protocol utilized in the emergency department (ED) was revised based on a review of current research changing initial screening and reevaluation times from 120 to 90 min. A prospective comparative study of patients presenting to the ED with chest pain was performed comparing the existing chest pain protocol of 120 min (standard care) with a rapid screening evaluation protocol of 90 min. A total of 128 patients presenting to an ED in Texas with chest pain comprised the sample for this study. There was a significant difference in the number of minutes between the groups for readiness for disposition. The average time from chest pain evaluation to readiness for disposition home, observation, or admission decreased from an average of 191 min in the standard care group to an average of 118 min in the rapid screening group. Use of the rapid screening and evaluation protocol decreased the time to disposition by an average of 73 min, which enhanced ED flow without influencing disposition and patient safety. ©2015 American Association of Nurse Practitioners.
-
Energy Technology Data Exchange (ETDEWEB)
Romberger, Jeff [SBW Consulting, Inc., Bellevue, WA (United States)
2017-06-21
An adjustable-speed drive (ASD) includes all devices that vary the speed of a rotating load, including those that vary the motor speed and linkage devices that allow constant motor speed while varying the load speed. The Variable Frequency Drive Evaluation Protocol presented here addresses evaluation issues for variable-frequency drives (VFDs) installed on commercial and industrial motor-driven centrifugal fans and pumps for which torque varies with speed. Constant torque load applications, such as those for positive displacement pumps, are not covered by this protocol.
-
International Nuclear Information System (INIS)
Kluge, A.; Bachmann, G.; Rominger, M.; Schoenburg, M.
2004-01-01
Purpose: Integration of MR venography in a comprehensive MR imaging protocol in patients with suspected pulmonary embolism (PE) and evaluation of contrast media dosage, timing and postprocessing for diagnostic accuracy. Materials and Methods: Fortyeight consecutive inpatients with suspected PE or deep vein thrombosis were examined by MR venography according to one of the following protocols: protocol I: MR venography only, 0.25 mmol/kg bodyweight (BW) Gadopentate dimeglumine(Gd-DTPA) as single dose, bolus timing; protocol II: MR angiography of pulmonary arteries with a cumulative dosage of 0.25 mmol/kg contrast media, modification of coil setting for MR venography without further contrast media application; protocol III: as protocol II but with 0.125 mmol/kg BW, followed by MR venography. Signal-to-noise ratio, contrast-to-noise ratio, number of definable vascular segments and image quality were evaluated. The results were compared to conventional bilateral venography. Results: All MR venography examinations were of diagnostic quality and the examination time was below 10 min. MR venography could be performed in all 48 patients comparted to 43 of 48 patients for conventional venography. Significantly more superficial and deep veins of the leg could be visualized by MR venography (94% compared to 83% for conventional venography). Sensitivity and specificity were 100% and 92%, respectively. Quality differed significantly between 0.125 mmol/kg (protocol III) and 0.25 mmol/kg Gd-DTPA (protocols I and II) while timing did not influence quality (protocol I vs. II). (orig.) [de
-
UV Impacts Avoided by the Montreal Protocol
Newman, Paul; McKenzie, Richard
2010-01-01
Temporal and geographical variabilities in the future "World Expected" UV environment are compared with the "World Avoided", which would have occurred without the Montreal Protocol on protection of the ozone layer and its subsequent amendments and adjustments. Based on calculations of clear-sky UV irradiances, the effects of the Montreal Protocol have been hugely beneficial to avoid the health risks, such as skin cancer, which are associated with high UV, while there is only a small increase in health risks, such as vitamin D deficiency, that are associated with low UV. However, interactions with climate change may lead to changes in cloud and albedo, and possibly behavioural changes which could also be important.
-
Comparative risk assessment in the energy industry
International Nuclear Information System (INIS)
Hamilton, L.D.
1981-01-01
This paper covers four approaches to risk assessment in the energy industry. The first is a comparison of the primary fuel cycles - coal and nuclear - standardized to 1 GW(e) power-plant year; this gives the societal risk of the production of a standardized amount of electricity. An example from underground coal mining is given to show how these estimates for the fuel cycles were made. The second approach is a comparison of the societal and individual occupational risks for different energy cycles per GWy(e). The third approach is a comparison of the societal and individual occupational risks of four different types of photovoltaic cell manufacture; this is an example of an intratechnology comparison. The fourth approach is a risk accounting method of analysis which estimates occupational health impacts for fabrication, construction, operation, and maintenance of energy technologies, and which, through an input-output model of the national economy, includes system-wide impacts as well as direct impacts of building and operating energy facilities
-
Wanted! Industrial Hygienists.
Stilkind, Jerry
1979-01-01
Due to increased pressure (for example, from the Occupational Safety and Health Act) to create healthier/safer worker environments, the number of industrial hygienist positions has increased. Compares the need to the demand. Examines industrial hygienist salary ranges, expected educational background, job opportunities, and training program…
-
Cross-Layer Protocol as a Better Option in Wireless Mesh Network with Respect to Layered-Protocol
Ahmed Abdulwahab Al-Ahdal; Dr. V. P. Pawar; G. N. Shinde
2014-01-01
The Optimal way to improve Wireless Mesh Networks (WMNs) performance is to use a better network protocol, but whether layered-protocol design or cross-layer design is a better option to optimize protocol performance in WMNs is still an on-going research topic. In this paper, we focus on cross-layer protocol as a better option with respect to layered-protocol. The layered protocol architecture (OSI) model divides networking tasks into layers and defines a pocket of services for each layer to b...
-
Energy Technology Data Exchange (ETDEWEB)
Eikeland, Per Ove; Christiansen, Atle Christer; Koefoed, Anne Louise; Midttun, Atle; Tangen, Kristian
1999-07-01
Greening of industry is a prominent topic on the European agenda and has received a new impetus with the Kyoto process, where the European Union and its member states are facing new obligations. Due to its role as a major infrastructure sector and due to its extensive emissions, the electricity sector has become a focal industry in this context. These same factors, as well as the large public ownership has, in fact, traditionally placed energy in a central public political focus. The energy and electricity sector hence exemplify the intertwined nature of economics and politics in sector developments, where technology choices and capacity expansions have numerous motivations and diverse interests to please. This report discusses ''green'' innovation in the energy industry. By selecting some of the most advanced examples of breakthrough for new green technologies in Europe, it explores the basic elements of successful greening of industry. To account for the fact that product innovation- and diffusion-processes are embedded in a complex politico-economic setting, we have developed an analytical framework, incorporating both economic, political and societal elements and the interplay between them. More specifically, environmentally oriented innovation is seen as evolving out of the interplay between: 1) a technical-commercial core (major market agents, i.e. the renewable energy supply industry, associated complementary industries and consumers); 2) the political-administrative system; and 3) the societal basis, referring to existing societal customs, norms, and modes of social organisation. Drawing on Porter's (1990) analysis of business clusters, we have termed our focus ''green energy-industrial cluster'' emergence and growth. We have taken Porter's attempt to break out of a limited market analysis into a broader strategic focus one step further, where the political and institutional dimensions are more explicitly included. This implies that we see the emergence of
-
International Nuclear Information System (INIS)
Eikeland, Per Ove; Christiansen, Atle Christer; Koefoed, Anne Louise; Midttun, Atle; Tangen, Kristian
1999-01-01
Greening of industry is a prominent topic on the European agenda and has received a new impetus with the Kyoto process, where the European Union and its member states are facing new obligations. Due to its role as a major infrastructure sector and due to its extensive emissions, the electricity sector has become a focal industry in this context. These same factors, as well as the large public ownership has, in fact, traditionally placed energy in a central public political focus. The energy and electricity sector hence exemplify the intertwined nature of economics and politics in sector developments, where technology choices and capacity expansions have numerous motivations and diverse interests to please. This report discusses ''green'' innovation in the energy industry. By selecting some of the most advanced examples of breakthrough for new green technologies in Europe, it explores the basic elements of successful greening of industry. To account for the fact that product innovation- and diffusion-processes are embedded in a complex politico-economic setting, we have developed an analytical framework, incorporating both economic, political and societal elements and the interplay between them. More specifically, environmentally oriented innovation is seen as evolving out of the interplay between: 1) a technical-commercial core (major market agents, i.e. the renewable energy supply industry, associated complementary industries and consumers); 2) the political-administrative system; and 3) the societal basis, referring to existing societal customs, norms, and modes of social organisation. Drawing on Porter's (1990) analysis of business clusters, we have termed our focus ''green energy-industrial cluster'' emergence and growth. We have taken Porter's attempt to break out of a limited market analysis into a broader strategic focus one step further, where the political and institutional dimensions are more explicitly included. This implies that we see the emergence of
-
A Passive Testing Approach for Protocols in Wireless Sensor Networks
Directory of Open Access Journals (Sweden)
Xiaoping Che
2015-11-01
Full Text Available Smart systems are today increasingly developed with the number of wireless sensor devices drastically increasing. They are implemented within several contexts throughout our environment. Thus, sensed data transported in ubiquitous systems are important, and the way to carry them must be efficient and reliable. For that purpose, several routing protocols have been proposed for wireless sensor networks (WSN. However, one stage that is often neglected before their deployment is the conformance testing process, a crucial and challenging step. Compared to active testing techniques commonly used in wired networks, passive approaches are more suitable to the WSN environment. While some works propose to specify the protocol with state models or to analyze them with simulators and emulators, we here propose a logic-based approach for formally specifying some functional requirements of a novel WSN routing protocol. We provide an algorithm to evaluate these properties on collected protocol execution traces. Further, we demonstrate the efficiency and suitability of our approach by its application into common WSN functional properties, as well as specific ones designed from our own routing protocol. We provide relevant testing verdicts through a real indoor testbed and the implementation of our protocol. Furthermore, the flexibility, genericity and practicability of our approach have been proven by the experimental results.
-
International Nuclear Information System (INIS)
Chen-Xu, Feng; Rong-Zhen, Jiao; Wen-Han, Zhang
2008-01-01
The performance of the differential-phase-shift keying (DPSK) protocol applying a 1310 nm up-conversion single-photon detector is analysed. The error rate and the communication rate as a function of distance for three quantum key distribution protocols, the Bennett–Brassard 1984, the Bennett–Brassard–Mermin 1992, and the DPSK, are presented. Then we compare the performance of these three protocols using the 1310nm up-conversion detector. We draw the conclusion that the DPSK protocol applying the detector has significant advantage over the other two protocols. Longer transmission distance and lower error rate can be achieved. (general)
-
Cost effectiveness of a protocol using palivizumab in preterm infants
Directory of Open Access Journals (Sweden)
Yolanda Hernández-Gago
2017-03-01
Full Text Available Objective: The main objective was to evaluate the cost-effectiveness of protocol use of palivizumab in premature established by consensus in our Hospital comparing it based on the recommendations of various Scientific Societies. As a secondary objective risk factors and severity of hospitalized patients attending the established protocol in our Hospital were analyzed. Methods: The study period was 4 seasons with the expanded protocol (retrospective data versus 2 with restricted or agreed protocol (prospective data. The perspective of the study was the Health System, including the costs of hospitalization and palivizumab our center. The calculation of the effectiveness was determined with the admission rate of premature patients stratified by weeks of gestational age <29, <32; and <35. For the analysis of risk factors and severity in patients admitted seasons with the new protocol are collected prospectively clinical data and environmental and social factors. Results: In the range of gestational age <29 years old and <32 greater effectiveness of the extended protocol was not demonstrated against the consensus. Only more effective for EG <35 in the accumulated data and comparing seasons 12/13 and 08/09 to 13/14 for individual data was observed. This range has an associated incremental cost effectiveness ratio of € 53 250,07 (range: € 14 793,39 to € 90 446,47 for singles data and € 50 525,53 (€ 28 688.22 to € 211 575,65 for accumulated. The establishment of this protocol in our center meant an average saving per season € 169 911,51. A cost- effectiveness of the extended protocol appropriate relationship is found if the cost of palivizumab per patient was less than € 1 206,67 (calculated for maximum use of the vial and a higher rate of hospitalization of 9.21%. Children entering the season with the new protocol (season 12/13 and 13/14 are 63.4% in children under 3 months and 90% are term infants who do not belong to any population at
-
Infinite Queue Management via Cascade Control for Industrial Routers in Smart Grid IP Networks
Directory of Open Access Journals (Sweden)
Ku-Hwan Kim
2016-01-01
Full Text Available Smart grid applications experience an extremely wide range of communication delay. Data flows of those applications are normally aggregated at industrial network routers in substations, form infinite (long queues termed bufferbloat issue, and might damage the operation of transmission control protocol. The default queue management scheme, DropTail, in such routers just drops packets if queue is full while the others in literature are mostly based on one-loop feedback control where an optimal point of performance between queue length and drop rate is limited. In this paper, we study the problem of managing a long queue of industrial router at substation under heterogeneous smart grid networks. Specifically, we propose an enqueue-dequeue dropping cascade control using a two-loop design method to control both window size and queue length. Moreover, our proposal can be easily implemented into router firmware with provided discrete expressions. Finally, our simulation results are presented to validate the possible benefits that can be gained from cascade control and compare the existing queue management methods as well.
-
Directory of Open Access Journals (Sweden)
Abbas Rahimi
2012-04-01
Full Text Available Background and Aim: Knee osteoarthritis is the most common cause for which the elderly people refere to physiotherapy outpatient clinics. This study aimed to investigate the effects of the Action Potential Stimulation (APS Therapy and the routine physiotherapy (PT protocol on relieving pain and swelling as well as the duration of the relief period in patients with knee osteoarthritis. Materials and Methods: 69 patients (62 females & 7 males with knee osteoarthritis were recruited in this study. The subjects were divided into two groups including APS Therapy (n=37, mean age: 55±13 years old and the routine PT protocol (n=32, mean age: 61±14 years old groups. A 10-session treatment period was carried out for each group; and their pain and swelling were measured at the first, fifth and tenth sessions and also one-month after the last session (follow up. The swelling was measured using measuring the circumference of the knee on the patella, 5 Cm above and 5 Cm below the patella. The routine PT protocol consisted of hot pack, ultrasound, TENS and exercise; and the APS therapy protocol included hot pack, APS Therapy and the same exercise. During the follow up, 50 out of 61 subjects were called on the phone and any pain changes were recorded.Results: In terms of swelling, the results showed significant reduction just on the patella only in the APS Therapy group (P<0.05. Visual Analogue Pain Scale (VAPS indicated a significant pain reduction in both groups. However, the APS Therapy group showed significantly pain reduction at the end of sessions five, ten and the follow up session (P<0.05. It was also revealed that while routine PT subjects showed no significant pain changes between the tenth and the follow up session, a gradual pain reduction was seen in the APS therapy group during this period (P<0.05. A gradual dosage reduction was recorded only in the APS therapy group, indicating a slight correlation with pain reduction (r=0.4.Conclusion: The
-
Institute of Scientific and Technical Information of China (English)
无
2002-01-01
A novel Multiple Access Control(MAC) protocol-User-dependent Perfect-scheduling Multiple Access(UPMA) protocol,which supports joint transmission of voice and data packets,is proposed.By this protocol,the bandwidth can be allocated dynamically to the uplink and downlink traffic with on-demand assignment and the transmission of Mobile Terminals(MTs) can be perfectly scheduled by means of polling.Meanwhile.a unique frame stucture is designed to guarantee Quality of Service(QoS) in voice traffic supporting.An effective colision resolution algorthm is also proposed to guarantee rapid channel access for activated MTs.Finally,performance of UPMA protocol is evaluated by simulation and compared with MPRMA protocol.Simulation results show that UPMA protocol has better performance.
-
Institute of Scientific and Technical Information of China (English)
Zhou Yajian; Li Jiandong; Liu Kai
2002-01-01
A novel Multiple Access Control (MAC) protocol - User-dependent Perfect-scheduling Multiple Access (UPMA) protocol, which supports joint transmission of voice and data packets,is proposed. By this protocol, the bandwidth can be allocated dynamically to the uplink and downlink traffic with on-demand assignment and the transmission of Mobile Terminals (MTs)can be perfectly scheduled by means of polling. Meanwhile, a unique frame structure is designed to guarantee Quality of Service (QoS) in voice traffic supporting. An effective collision resolution algorithm is also proposed to guarantee rapid channel access for activated MTs. Finally, performance of UPMA protocol is evaluated by simulation and compared with MPRMA protocol.Simulation results show that UPMA protocol has better performance.
-
Aging Perceptions in Tsimane' Amazonian Forager-Farmers Compared With Two Industrialized Societies.
Sorokowski, Piotr; Sorokowska, Agnieszka; Frackowiak, Tomasz; Löckenhoff, Corinna E
2017-07-01
Cross-cultural studies suggest that aging attitudes show some variation across societies, but this evidence is mostly drawn from industrialized settings. The limited research record on pre-industrial societies is largely qualitative in nature. The present study targeted this gap by adapting an existing multidimensional measure of aging attitudes for use in traditional populations and administering it to samples from one traditional society and two industrialized societies. We administered the adapted multidimensional measure of aging attitudes to samples from one traditional society (Tsimane' Amazonian forager-farmers in Bolivia, n = 90) and two industrialized societies (the United States, n = 91, and Poland, n = 100). Across societies, aging perceptions were more favorable for respect and wisdom than for other domains of functioning, and women were perceived to be aging less favorably. Further, the Tsimane' reported more positive aging perceptions than the U.S. and Polish samples, especially with regard to memory functioning. Within the Tsimane' sample, there was no evidence of an influence of acculturation on aging perceptions. The present study contributed to our understanding of cross-cultural differences in aging attitudes. Theoretical implications and directions for future research are discussed. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
-
Colon cleansing protocol in children: research conditions vs. clinical practice.
Elitsur, Yoram; Balfaqih, Yaslam; Preston, Deborah
2018-04-01
Colon preparation rates are the limiting factor for a successful diagnostic colonoscopy in children. Different colon cleansing protocols have been published for use in children. Unfortunately, the applicability of those published research protocols has not been formally evaluated in routine clinical practice. We investigated the success rate of our previously published colon cleansing protocol as utilized in our clinical practice. This was a retrospective study. In the clinical practice, the colon cleansing protocol included PEG-3350 at a dose of 2 g/kg/day plus Dulcolax (Bisacodyl, Boehringer Ingelheim, TX USA) 5 mg/day for 2 days. Adequate colon preparation was graded between 1 - 5, as previously described, and grade ≥ 4.0 was considered an adequate preparation. Patients were instructed to complete a questionnaire that included PEG-3350 dose, number of stools per day, consistency of each stool, and side effects (vomiting, abdominal pain). Clinical and endoscopic results were compared between the protocol under research conditions and routine practice. The success rate of the colon preparation in our clinical practice was similar to the results observed under our research protocol (75 % vs. 73.6 %). Moreover, the total number of stools, stool consistency, and the intubation rate of the terminal ileum were also similar. We concluded, that in our experience, the colon cleansing protocol used under research conditions was effective and appropriate for use in routine clinical practice. We recommend testing each new protocol under the routine conditions of clinical practice to confirm its applicability for general practitioners.
-
Development of a bedside viable ultrasound protocol to quantify appendicular lean tissue mass.
Paris, Michael T; Lafleur, Benoit; Dubin, Joel A; Mourtzakis, Marina
2017-10-01
Ultrasound is a non-invasive and readily available tool that can be prospectively applied at the bedside to assess muscle mass in clinical settings. The four-site protocol, which images two anatomical sites on each quadriceps, may be a viable bedside method, but its ability to predict musculature has not been compared against whole-body reference methods. Our primary objectives were to (i) compare the four-site protocol's ability to predict appendicular lean tissue mass from dual-energy X-ray absorptiometry; (ii) optimize the predictability of the four-site protocol with additional anatomical muscle thicknesses and easily obtained covariates; and (iii) assess the ability of the optimized protocol to identify individuals with low lean tissue mass. This observational cross-sectional study recruited 96 university and community dwelling adults. Participants underwent ultrasound scans for assessment of muscle thickness and whole-body dual-energy X-ray absorptiometry scans for assessment of appendicular lean tissue. Ultrasound protocols included (i) the nine-site protocol, which images nine anterior and posterior muscle groups in supine and prone positions, and (ii) the four-site protocol, which images two anterior sites on each quadriceps muscle group in a supine position. The four-site protocol was strongly associated (R 2 = 0.72) with appendicular lean tissue mass, but Bland-Altman analysis displayed wide limits of agreement (-5.67, 5.67 kg). Incorporating the anterior upper arm muscle thickness, and covariates age and sex, alongside the four-site protocol, improved the association (R 2 = 0.91) with appendicular lean tissue and displayed narrower limits of agreement (-3.18, 3.18 kg). The optimized protocol demonstrated a strong ability to identify low lean tissue mass (area under the curve = 0.89). The four-site protocol can be improved with the addition of the anterior upper arm muscle thickness, sex, and age when predicting appendicular lean tissue mass
-
Differences in handgrip strength protocols to identify sarcopenia and frailty - a systematic review.
Sousa-Santos, A R; Amaral, T F
2017-10-16
Hand grip strength (HGS) is used for the diagnosis of sarcopenia and frailty. Several factors have been shown to influence HGS values during measurement. Therefore, variations in the protocols used to assess HGS, as part of the diagnosis of sarcopenia and frailty, may lead to the identification of different individuals with low HGS, introducing bias. The aim of this systematic review is to gather all the relevant studies that measured HGS to diagnose sarcopenia and frailty and to identify the differences between the protocols used. A systematic review was carried out following the recommendations of The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Statement. PubMed and Web of Science were systematically searched, until August 16, 2016. The evidence regarding HGS measurement protocols used to diagnose sarcopenia and frailty was summarised and the most recent protocols regarding the procedure were compared. From the described search 4393 articles were identified. Seventy-two studies were included in this systematic review, in which 37 referred to sarcopenia articles, 33 to frailty and two evaluated both conditions. Most studies presented limited information regarding the protocols used. The majority of the studies included did not describe a complete procedure of HGS measurement. The high heterogeneity between the protocols used, in sarcopenia and frailty studies, create an enormous difficulty in drawing comparative conclusions among them.
-
Piletska, Elena V; Karim, Kal; Cutler, Malcolm; Piletsky, Sergey A
2013-01-01
A polymeric adsorbent for extraction of the antimalarial drug artemisinin from Artemisia annua L. was computationally designed. This polymer demonstrated a high capacity for artemisinin (120 mg g(-1) ), quantitative recovery (87%) and was found to be an effective material for purification of artemisinin from complex plant matrix. The artemisinin quantification was conducted using an optimised HPLC-MS protocol, which was characterised by high precision and linearity in the concentration range between 0.05 and 2 μg mL(-1) . Optimisation of the purification protocol also involved screening of commercial adsorbents for the removal of waxes and other interfering natural compounds, which inhibit the crystallisation of artemisinin. As a result of a two step-purification protocol crystals of artemisinin were obtained, and artemisinin purity was evaluated as 75%. By performing the second stage of purification twice, the purity of artemisinin can be further improved to 99%. The developed protocol produced high-purity artemisinin using only a few purification steps that makes it suitable for large scale industrial manufacturing process. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
-
Lv, Peijie; Liu, Jie; Chai, Yaru; Yan, Xiaopeng; Gao, Jianbo; Dong, Junqiang
2017-01-01
To evaluate the feasibility, image quality, and radiation dose of automatic spectral imaging protocol selection (ASIS) and adaptive statistical iterative reconstruction (ASIR) with reduced contrast agent dose in abdominal multiphase CT. One hundred and sixty patients were randomly divided into two scan protocols (n = 80 each; protocol A, 120 kVp/450 mgI/kg, filtered back projection algorithm (FBP); protocol B, spectral CT imaging with ASIS and 40 to 70 keV monochromatic images generated per 300 mgI/kg, ASIR algorithm. Quantitative parameters (image noise and contrast-to-noise ratios [CNRs]) and qualitative visual parameters (image noise, small structures, organ enhancement, and overall image quality) were compared. Monochromatic images at 50 keV and 60 keV provided similar or lower image noise, but higher contrast and overall image quality as compared with 120-kVp images. Despite the higher image noise, 40-keV images showed similar overall image quality compared to 120-kVp images. Radiation dose did not differ between the two protocols, while contrast agent dose in protocol B was reduced by 33 %. Application of ASIR and ASIS to monochromatic imaging from 40 to 60 keV allowed contrast agent dose reduction with adequate image quality and without increasing radiation dose compared to 120 kVp with FBP. • Automatic spectral imaging protocol selection provides appropriate scan protocols. • Abdominal CT is feasible using spectral imaging and 300 mgI/kg contrast agent. • 50-keV monochromatic images with 50 % ASIR provide optimal image quality.
-
Sciammarella, Maria; Shrestha, Uttam M; Seo, Youngho; Gullberg, Grant T; Botvinick, Elias H
2017-08-03
SPECT myocardial perfusion imaging (MPI) is a clinical mainstay that is typically performed with static imaging protocols and visually or semi-quantitatively assessed for perfusion defects based upon the relative intensity of myocardial regions. Dynamic cardiac SPECT presents a new imaging technique based on time-varying information of radiotracer distribution, which permits the evaluation of regional myocardial blood flow (MBF) and coronary flow reserve (CFR). In this work, a preliminary feasibility study was conducted in a small patient sample designed to implement a unique combined static-dynamic single-dose one-day visit imaging protocol to compare quantitative dynamic SPECT with static conventional SPECT for improving the diagnosis of coronary artery disease (CAD). Fifteen patients (11 males, four females, mean age 71 ± 9 years) were enrolled for a combined dynamic and static SPECT (Infinia Hawkeye 4, GE Healthcare) imaging protocol with a single dose of 99m Tc-tetrofosmin administered at rest and a single dose administered at stress in a one-day visit. Out of 15 patients, eleven had selective coronary angiography (SCA), 8 within 6 months and the rest within 24 months of SPECT imaging, without intervening symptoms or interventions. The extent and severity of perfusion defects in each myocardial region was graded visually. Dynamically acquired data were also used to estimate the MBF and CFR. Both visually graded images and estimated CFR were tested against SCA as a reference to evaluate the validity of the methods. Overall, conventional static SPECT was normal in ten patients and abnormal in five patients, dynamic SPECT was normal in 12 patients and abnormal in three patients, and CFR from dynamic SPECT was normal in nine patients and abnormal in six patients. Among those 11 patients with SCA, conventional SPECT was normal in 5, 3 with documented CAD on SCA with an overall accuracy of 64%, sensitivity of 40% and specificity of 83%. Dynamic SPECT image
-
Protocol for the Control of Emergencies with Dangerous Materials
International Nuclear Information System (INIS)
Rodriguez Acosta, F.
2000-01-01
This document is required to serve as a guide for plant engineers, in charge of the security and industrial hygiene or those people that for its work, have relationship with the use, storage and distribution of chemical substances, which represent a diversity of risks as the toxicity, the inflammability and the risk of explosion. The information that the specific protocol contains is precise and a series of sections that summarize the general information of the substance are developed, like its use, the risk of explosion, the inflammability and the physical-chemical properties. Additionally, some sections are included like the answer mechanisms before the fire presence, the personnel's decontamination and of the equipment, the gathering of the waste and the procedures of first aids. The chemical substances that cause bigger quantity of events for dangerous materials in Costa Rica are the acids, the bases, the chlorine, the liquate petroleum gas (LPG), the ammonia and the agro-chemicals. Due to the intrinsic risk that it possesses these substances, a protocol to act efficiently in front of an emergency related with some of the substances are developed. Due to the increment in the incidence of events with dangerous materials in different population's sectors, for example spills in the roads, emergencies in industries and educational centers, a law with the purpose of stopping the use and the indiscriminate manipulation of these substances in non-capable locations is necessary. Additionally, it is necessary the upgrade in the equipment and in the containers that don't fulfill the minimum requirements of security, as well as to offer the maximum security to people that have contact with such chemical substances. (Author) [es
-
Traffic Adaptive MAC Protocols in Wireless Body Area Networks
Directory of Open Access Journals (Sweden)
Farhan Masud
2017-01-01
Full Text Available In Wireless Body Area Networks (WBANs, every healthcare application that is based on physical sensors is responsible for monitoring the vital signs data of patient. WBANs applications consist of heterogeneous and dynamic traffic loads. Routine patient’s observation is described as low-load traffic while an alarming situation that is unpredictable by nature is referred to as high-load traffic. This paper offers a thematic review of traffic adaptive Medium Access Control (MAC protocols in WBANs. First, we have categorized them based on their goals, methods, and metrics of evaluation. The Zigbee standard IEEE 802.15.4 and the baseline MAC IEEE 802.15.6 are also reviewed in terms of traffic adaptive approaches. Furthermore, a comparative analysis of the protocols is made and their performances are analyzed in terms of delay, packet delivery ratio (PDR, and energy consumption. The literature shows that no review work has been done on traffic adaptive MAC protocols in WBANs. This review work, therefore, could add enhancement to traffic adaptive MAC protocols and will stimulate a better way of solving the traffic adaptivity problem.
-
Energy Technology Data Exchange (ETDEWEB)
Lv, Peijie; Liu, Jie; Chai, Yaru; Yan, Xiaopeng; Gao, Jianbo; Dong, Junqiang [The First Affiliated Hospital of Zhengzhou University, Department of Radiology, Zhengzhou, Henan Province (China)
2017-01-15
To evaluate the feasibility, image quality, and radiation dose of automatic spectral imaging protocol selection (ASIS) and adaptive statistical iterative reconstruction (ASIR) with reduced contrast agent dose in abdominal multiphase CT. One hundred and sixty patients were randomly divided into two scan protocols (n = 80) each; protocol A, 120 kVp/450 mgI/kg, filtered back projection algorithm (FBP); protocol B, spectral CT imaging with ASIS and 40 to 70 keV monochromatic images generated per 300 mgI/kg, ASIR algorithm. Quantitative parameters (image noise and contrast-to-noise ratios [CNRs]) and qualitative visual parameters (image noise, small structures, organ enhancement, and overall image quality) were compared. Monochromatic images at 50 keV and 60 keV provided similar or lower image noise, but higher contrast and overall image quality as compared with 120-kVp images. Despite the higher image noise, 40-keV images showed similar overall image quality compared to 120-kVp images. Radiation dose did not differ between the two protocols, while contrast agent dose in protocol B was reduced by 33 %. Application of ASIR and ASIS to monochromatic imaging from 40 to 60 keV allowed contrast agent dose reduction with adequate image quality and without increasing radiation dose compared to 120 kVp with FBP. (orig.)
-
International Nuclear Information System (INIS)
Lv, Peijie; Liu, Jie; Chai, Yaru; Yan, Xiaopeng; Gao, Jianbo; Dong, Junqiang
2017-01-01
To evaluate the feasibility, image quality, and radiation dose of automatic spectral imaging protocol selection (ASIS) and adaptive statistical iterative reconstruction (ASIR) with reduced contrast agent dose in abdominal multiphase CT. One hundred and sixty patients were randomly divided into two scan protocols (n = 80) each; protocol A, 120 kVp/450 mgI/kg, filtered back projection algorithm (FBP); protocol B, spectral CT imaging with ASIS and 40 to 70 keV monochromatic images generated per 300 mgI/kg, ASIR algorithm. Quantitative parameters (image noise and contrast-to-noise ratios [CNRs]) and qualitative visual parameters (image noise, small structures, organ enhancement, and overall image quality) were compared. Monochromatic images at 50 keV and 60 keV provided similar or lower image noise, but higher contrast and overall image quality as compared with 120-kVp images. Despite the higher image noise, 40-keV images showed similar overall image quality compared to 120-kVp images. Radiation dose did not differ between the two protocols, while contrast agent dose in protocol B was reduced by 33 %. Application of ASIR and ASIS to monochromatic imaging from 40 to 60 keV allowed contrast agent dose reduction with adequate image quality and without increasing radiation dose compared to 120 kVp with FBP. (orig.)
-
Vassalou, Evangelia E; Raissaki, Maria; Magkanas, Eleftherios; Antoniou, Katerina M; Karantanas, Apostolos H
2018-03-01
To compare a simplified ultrasonographic (US) protocol in 2 patient positions with the same-positioned comprehensive US assessments and high-resolution computed tomographic (CT) findings in patients with idiopathic pulmonary fibrosis. Twenty-five consecutive patients with idiopathic pulmonary fibrosis were prospectively enrolled and examined in 2 sessions. During session 1, patients were examined with a US protocol including 56 lung intercostal spaces in supine/sitting (supine/sitting comprehensive protocol) and lateral decubitus (decubitus comprehensive protocol) positions. During session 2, patients were evaluated with a 16-intercostal space US protocol in sitting (sitting simplified protocol) and left/right decubitus (decubitus simplified protocol) positions. The 16 intercostal spaces were chosen according to the prevalence of idiopathic pulmonary fibrosis-related changes on high-resolution CT. The sum of B-lines counted in each intercostal space formed the US scores for all 4 US protocols: supine/sitting and decubitus comprehensive US scores and sitting and decubitus simplified US scores. High-resolution CT-related Warrick scores (J Rheumatol 1991; 18:1520-1528) were compared to US scores. The duration of each protocol was recorded. A significant correlation was found between all US scores and Warrick scores and between simplified and corresponding comprehensive scores (P idiopathic pulmonary fibrosis. The 16-intercostal space simplified protocol in the lateral decubitus position correlated better with high-resolution CT findings and was less time-consuming compared to the sitting position. © 2017 by the American Institute of Ultrasound in Medicine.
-
An Energy-Efficient Link Layer Protocol for Reliable Transmission over Wireless Networks
Directory of Open Access Journals (Sweden)
Iqbal Adnan
2009-01-01
Full Text Available In multihop wireless networks, hop-by-hop reliability is generally achieved through positive acknowledgments at the MAC layer. However, positive acknowledgments introduce significant energy inefficiencies on battery-constrained devices. This inefficiency becomes particularly significant on high error rate channels. We propose to reduce the energy consumption during retransmissions using a novel protocol that localizes bit-errors at the MAC layer. The proposed protocol, referred to as Selective Retransmission using Virtual Fragmentation (SRVF, requires simple modifications to the positive-ACK-based reliability mechanism but provides substantial improvements in energy efficiency. The main premise of the protocol is to localize bit-errors by performing partial checksums on disjoint parts or virtual fragments of a packet. In case of error, only the corrupted virtual fragments are retransmitted. We develop stochastic models of the Simple Positive-ACK-based reliability, the previously-proposed Packet Length Optimization (PLO protocol, and the SRVF protocol operating over an arbitrary-order Markov wireless channel. Our analytical models show that SRVF provides significant theoretical improvements in energy efficiency over existing protocols. We then use bit-error traces collected over different real networks to empirically compare the proposed and existing protocols. These experimental results further substantiate that SRVF provides considerably better energy efficiency than Simple Positive-ACK and Packet Length Optimization protocols.
-
Directory of Open Access Journals (Sweden)
Xing Hu
2017-01-01
Full Text Available In high diversity node situation, multichannel MAC protocol can improve the frequency efficiency, owing to fewer collisions compared with single-channel MAC protocol. And the performance of cyclic quorum-based multichannel (CQM MAC protocol is outstanding. Based on cyclic quorum system and channel slot allocation, it can avoid the bottleneck that others suffered from and can be easily realized with only one transceiver. To obtain the accurate performance of CQM MAC protocol, a Markov chain model, which combines the channel-hopping strategy of CQM protocol and IEEE 802.11 distributed coordination function (DCF, is proposed. The results of numerical analysis show that the optimal performance of CQM protocol can be obtained in saturation bound situation. And then we obtain the saturation bound of CQM system by bird swarm algorithm. In addition, to improve the performance of CQM protocol in unsaturation situation, a dynamic channel slot allocation of CQM (DCQM protocol is proposed, based on wavelet neural network. Finally, the performance of CQM protocol and DCQM protocol is simulated by Qualnet platform. And the simulation results show that the analytic and simulation results match very well; the DCQM performs better in unsaturation situation.
-
Shahbazi, Sasha; Kurdve, Martin; Bjelkemyr, Marcus; Jönsson, Christina; Wiktorsson, Magnus
2013-01-01
Industrial waste is a key factor when assessing the sustainability of a manufacturing process or company. A multitude of visions, concepts, tools, and policies are used both academically and industrially to improve the environmental effect of manufacturing; a majority of these approaches have a direct bearing on industrial waste. The identified approaches have in this paper been categorised according to application area, goals, organisational entity, life cycle phase, and waste hierarchy stag...
-
DEFF Research Database (Denmark)
Geisler, Martin Joakim Bittel
cryptography was thus concerned with message confidentiality and integrity. Modern cryptography cover a much wider range of subjects including the area of secure multiparty computation, which will be the main topic of this dissertation. Our first contribution is a new protocol for secure comparison, presented...... implemented the comparison protocol in Java and benchmarks show that is it highly competitive and practical. The biggest contribution of this dissertation is a general framework for secure multiparty computation. Instead of making new ad hoc implementations for each protocol, we want a single and extensible...... in Chapter 2. Comparisons play a key role in many systems such as online auctions and benchmarks — it is not unreasonable to say that when parties come together for a multiparty computation, it is because they want to make decisions that depend on private information. Decisions depend on comparisons. We have...
-
A comparative study on the Environmental Impact Assessment of industrial projects in Malaysia
Marmaya, E. A.; Mahbub, R.
2018-02-01
In the past decade, mankind has been manipulating the natural environment to better suit its needs for providing buildings and infrastructure for residential, commercial, business and industrial purposes. The rapid industrialization that has taken place has generated several issues regarding the environment. Therefore, managing environmental risks in construction projects has been recognized as an important process to achieve the project objectives in terms of time, cost, quality, safety and environmental sustainability. The aim of this research is to assess the environmental impact of industrial projects to the surrounding areas. The impact to the environment can be categorized into several aspects such as ecosystem impact, natural resources impact and public impact. This research employs the quantitative approach, that is, a questionnaire survey targeted at the occupants living in the surrounding areas of the case study location, namely the industrial sites in Sabah Ammonia Urea (SAMUR), Sipitang, Sabah and Lynas Advanced Materials Plant (LAMP), Gebeng Pahang. The findings of the research show that the two projects are perceived to have negative environmental impact especially for land pollution and green-house gas emissions.
-
The natural gas industry in Japan and Europe. A comparative study
International Nuclear Information System (INIS)
Hideo Taki.
1994-01-01
Natural gas demand is forecast to rise dramatically in both Japan and Europe in the next two decades. Between the Japanese gas market and that of West European countries, however, there are considerable differences as well as some similarities. This study looks at demand and supply of natural gas, the history and structure of the industries, and the regulatory regimes, in both Japan and West European countries. It concentrates specifically on the latest moves towards liberalization of gas markets. Finally it considers possible implications of the European experience for the future of the industry in Japan, where not only is the government about to introduce a more competitive environment, but construction of a national transmission pipeline is under active consideration. (author)
-
International Nuclear Information System (INIS)
Lemouzy, B; Garnier, J-C; Neufeld, N
2011-01-01
The goal of the LHCb readout upgrade is to accelerate the DAQ to 40 MHz. Such a DAQ system will certainly employ 10 Gigabit or similar technologies and might also need new networking protocols such as a customized, light-weight TCP or more specialized protocols. A test module is being implemented to be integrated in the existing LHCb infrastructure. It is a multiple 10-Gigabit traffic generator, driven by a Stratix IV FPGA, and flexible enough to generate LHCb's raw data packets. Traffic data are either internally generated or read from external storage via the network. We have implemented a light-weight industry standard protocol ATA over Ethernet (AoE) and we present an outlook of using a file-system on these network-exported disk-drivers.
-
van Sinderen, Marten J.; Nieuwenhuis, Lambert J.M.
2001-01-01
The goal of the PROMS series of conferences and workshops is to contribute to scientific, strategic, and practical cooperation between research institutes and industrial companies in the area of multimedia protocols. This is also the goal of PROMS 2001. The basic theme of this conference continues
-
A proportional integral estimator-based clock synchronization protocol for wireless sensor networks.
Yang, Wenlun; Fu, Minyue
2017-11-01
Clock synchronization is an issue of vital importance in applications of WSNs. This paper proposes a proportional integral estimator-based protocol (EBP) to achieve clock synchronization for wireless sensor networks. As each local clock skew gradually drifts, synchronization accuracy will decline over time. Compared with existing consensus-based approaches, the proposed synchronization protocol improves synchronization accuracy under time-varying clock skews. Moreover, by restricting synchronization error of clock skew into a relative small quantity, it could reduce periodic re-synchronization frequencies. At last, a pseudo-synchronous implementation for skew compensation is introduced as synchronous protocol is unrealistic in practice. Numerical simulations are shown to illustrate the performance of the proposed protocol. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.
-
Protocols and guidelines for mobile chest radiography in Irish public hospitals
International Nuclear Information System (INIS)
Kelly, Amanda; Toomey, Rachel
2015-01-01
Background: The mobile chest radiograph is a highly variable examination, in both technique and setting. Protocols and guidelines are one method by which examinations can be standardised, and provide information when one is unsure how to proceed. This study was undertaken to investigate the existence of protocols and guidelines available for the mobile chest radiograph, to establish their nature and compare them under a variety of headings. Methodology: A postal survey was administered to the Radiography Service Managers in the public hospitals under the governance of the Health Service Executive (HSE) in Ireland. The survey contained questions regarding hospital demographics, contents of existing protocols or guidelines, and why a protocol or guideline was not in place, if this was the case. Results: The response rate to the survey was 62% (n = 24). Those that had a specific protocol in place amounted to 63% (n = 15), 71% (n = 17) had a specific guideline, and 63% (n = 15) had both. Twenty nine percent (n = 7) had no specific protocol/guideline in place. Scientific research (88%, n = 15) and radiographer experience (82%, n = 14) were the most common sources used to inform protocols and guidelines. Conclusions: There are protocols and guidelines available to radiographers for mobile chest radiography in the majority of public hospitals in Ireland. The nature of the protocols and guidelines generally coincides with the HSE guidance regarding what sources of information should be used and how often they should be updated
-
Rasmussen, Stinne Eika; Nebsbjerg, Mette Amalie; Krogh, Lise Qvirin; Bjørnshave, Katrine; Krogh, Kristian; Povlsen, Jonas Agerlund; Riddervold, Ingunn Skogstad; Grøfte, Thorbjørn; Kirkegaard, Hans; Løfgren, Bo
2017-01-01
Emergency dispatchers use protocols to instruct bystanders in cardiopulmonary resuscitation (CPR). Studies changing one element in the dispatcher's protocol report improved CPR quality. Whether several changes interact is unknown and the effect of combining multiple changes previously reported to improve CPR quality into one protocol remains to be investigated. We hypothesize that a novel dispatch protocol, combining multiple beneficial elements improves CPR quality compared with a standard protocol. A novel dispatch protocol was designed including wording on chest compressions, using a metronome, regular encouragements and a 10-s rest each minute. In a simulated cardiac arrest scenario, laypersons were randomized to perform single-rescuer CPR guided with the novel or the standard protocol. a composite endpoint of time to first compression, hand position, compression depth and rate and hands-off time (maximum score: 22 points). Afterwards participants answered a questionnaire evaluating the dispatcher assistance. The novel protocol (n=61) improved CPR quality score compared with the standard protocol (n=64) (mean (SD): 18.6 (1.4)) points vs. 17.5 (1.7) points, pCPR. A novel bundle of care protocol improved CPR quality score and motivation among rescuers. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.
-
Van Den Haak, M. J.; De Jong, M. D T; Schellens, P. J.
2004-01-01
This paper describes a comparative study of three usability test approaches: concurrent think-aloud protocols, retrospective think-aloud protocols, and constructive interaction. These three methods were compared by means of an evaluation of an online library catalogue, which involved four points of
-
van den Haak, M.J.; de Jong, Menno D.T.; Schellens, P.J.
2004-01-01
This paper describes a comparative study of three usability test approaches: concurrent think-aloud protocols, retrospective think-aloud protocols, and constructive interaction. These three methods were compared by means of an evaluation of an online library catalogue, which involved four points of
-
Ontario electricity rates and industrial competitiveness
International Nuclear Information System (INIS)
2006-01-01
Industrial electricity prices in Ontario rose significantly after the opening of the competitive Ontario electricity market in 2002, thereby widening the gap between industrial electricity prices in Ontario and those in other Canadian provinces. Navigant Consulting Ltd. conducted this study at the request of the Association of Major Power Consumers in Ontario (AMPCO) to research and compare current and historical electricity prices in Ontario and other jurisdictions in North America. The study provided an independent analysis of how industrial electricity prices in Ontario compare to those in other jurisdiction in which AMPCO members operate. It also formed the basis for comparing the impacts of electricity policy on the economic competitiveness of major power consumers in Ontario. The relative electricity intensity in the United States, Ontario and other Canadian provinces was reviewed for specific industries, including forest products, steel manufacturing, petroleum refining, chemical manufacturing and cement manufacturing. Publicly available aggregate data from Statistics Canada and the United States Bureau of the Census was then used to compare average electricity prices for industrial customers in Ontario. The data confirmed that Ontario has experienced a decline in its competitive price advantage in industrial electricity. Delivered industrial electricity prices in Ontario have increased by more than 60 per cent since 2001. Industrial electricity prices in Ontario rose above those in Quebec, Manitoba, British Columbia and New Brunswick. In addition, industrial electricity prices in Ontario rose above those in competing states such as Ohio and Illinois, in part due to the increase in the value of the Canadian dollar. It was concluded that the price increase may lead to a greater decline in economic output in Ontario compared to competing jurisdictions. 2 tabs., 14 figs., 1 appendix
-
OIT Wireless Telemetry for Industrial Applications
Energy Technology Data Exchange (ETDEWEB)
Manges, WW
2002-09-03
The need for advanced wireless technology has been identified in the National Research Council publication (1) ''Manufacturing Process Controls for the Industries of the Future as a Critical Technology for the Future''. The deployment challenges to be overcome in order for wireless to be a viable option include: (1) eliminating interference (assuring reliable communications); (2) easing the deployment of intelligent, wireless sensors; (3) developing reliable networks (robust architectures); (4) developing remote power (long-lasting and reliable); and (5) developing standardized communication protocols. This project demonstrated the feasibility of robust wireless sensor networks that could meet these requirements for the harsh environments common to the DOE/OIT Industries of the Future. It resulted in a wireless test bed that was demonstrated in a paper mill and a steel plant. The test bed illustrated key protocols and components that would be required in a real-life, wireless network. The technologies for low power connectivity developed and demonstrated at the plant eased fears that the radios would interfere with existing control equipment. The same direct sequence, spread spectrum (DSSS) technology that helped assure the reliability of the connection also demonstrated that wireless communication was feasible in these plants without boosting the transmitted power to dangerous levels. Our experience and research have indicated that two key parameters are of ultimate importance: (1) reliability and (2) inter-system compatibility. Reliability is the key to immediate acceptance among industrial users. The importance cannot be overstated, because users will not tolerate an unreliable information network. A longer term issue that is at least as important as the reliability of a single system is the inter-system compatibility between these wireless sensor networks and other wireless systems that are part of our industries. In the long run, the
-
Energy Technology Data Exchange (ETDEWEB)
Huang, Wei Ming; Lee, Grace W.M. [Graduate Institute of Environmental Engineering, National Taiwan University, 71, Chou-Shan Road, Taipei 106 (China); Wu, Chih Cheng [Energy and Air Pollution Control Section, New Materials R and D Department, China Steel Corporation, 1, Chung-Kang Road, Siaogang District, Kaohsiung 81233 (China)
2008-01-15
The Kyoto Protocol attempts through political negotiations to guide participating industrialized countries' greenhouse gas (GHG) emissions from a positive growing trend, to reach a peak point (or turning point), and then be reduced to a negative growth. That means the relationship between decreasing GHG emissions and economic growth may be described by an inverted-U curve (or called a bell-shaped curve), which is consistent with the concept of the Environmental Kuznets Curve (EKC) hypothesis. This research observed that the economic development and GHG emissions in Economies in Transition (EITs) exhibit a hockey-stick curve trend (or called quasi-L-shape curve), that also generates a lot of 'hot air' which is significant to the implementation of the Kyoto Protocol. In addition, through the analysis of single-country time series data and GDP data, this research demonstrated that statistical data for most of the Annex II countries do not possess evidence that supports the EKC hypothesis for GHG emissions. The results from this study also indicated that the 38 industrialized countries are unable to meet their targets under the Kyoto Protocol within the specified time period, which are probably caused by the econometric method's inability to predict accurately the extents and development of innovative technologies and Clean Development Mechanism (CDM) projects. If the international community truly wants to reduce the GHG emissions, the effectiveness of the existing international framework for emissions reduction needs to be reconsidered seriously, and the global cooperation mechanism also needs to be greatly enhanced. (author)
-
Energy Technology Data Exchange (ETDEWEB)
Huang Weiming [Graduate Institute of Environmental Engineering, National Taiwan University, 71, Chou-Shan Road, Taipei 106, Taiwan (China); Lee, Grace W.M. [Graduate Institute of Environmental Engineering, National Taiwan University, 71, Chou-Shan Road, Taipei 106, Taiwan (China)], E-mail: gracelee@ntu.edu.tw; Wu Chihcheng [Energy and Air Pollution Control Section, New Materials R and D Department, China Steel Corporation, 1, Chung-Kang Road, Siaogang District, Kaohsiung 81233, Taiwan (China)
2008-01-15
The Kyoto Protocol attempts through political negotiations to guide participating industrialized countries' greenhouse gas (GHG) emissions from a positive growing trend, to reach a peak point (or turning point), and then be reduced to a negative growth. That means the relationship between decreasing GHG emissions and economic growth may be described by an inverted-U curve (or called a bell-shaped curve), which is consistent with the concept of the Environmental Kuznets Curve (EKC) hypothesis. This research observed that the economic development and GHG emissions in Economies in Transition (EITs) exhibit a hockey-stick curve trend (or called quasi-L-shape curve), that also generates a lot of 'hot air' which is significant to the implementation of the Kyoto Protocol. In addition, through the analysis of single-country time series data and GDP data, this research demonstrated that statistical data for most of the Annex II countries do not possess evidence that supports the EKC hypothesis for GHG emissions. The results from this study also indicated that the 38 industrialized countries are unable to meet their targets under the Kyoto Protocol within the specified time period, which are probably caused by the econometric method's inability to predict accurately the extents and development of innovative technologies and Clean Development Mechanism (CDM) projects. If the international community truly wants to reduce the GHG emissions, the effectiveness of the existing international framework for emissions reduction needs to be reconsidered seriously, and the global cooperation mechanism also needs to be greatly enhanced.
-
International Nuclear Information System (INIS)
Huang Weiming; Lee, Grace W.M.; Wu Chihcheng
2008-01-01
The Kyoto Protocol attempts through political negotiations to guide participating industrialized countries' greenhouse gas (GHG) emissions from a positive growing trend, to reach a peak point (or turning point), and then be reduced to a negative growth. That means the relationship between decreasing GHG emissions and economic growth may be described by an inverted-U curve (or called a bell-shaped curve), which is consistent with the concept of the Environmental Kuznets Curve (EKC) hypothesis. This research observed that the economic development and GHG emissions in Economies in Transition (EITs) exhibit a hockey-stick curve trend (or called quasi-L-shape curve), that also generates a lot of 'hot air' which is significant to the implementation of the Kyoto Protocol. In addition, through the analysis of single-country time series data and GDP data, this research demonstrated that statistical data for most of the Annex II countries do not possess evidence that supports the EKC hypothesis for GHG emissions. The results from this study also indicated that the 38 industrialized countries are unable to meet their targets under the Kyoto Protocol within the specified time period, which are probably caused by the econometric method's inability to predict accurately the extents and development of innovative technologies and Clean Development Mechanism (CDM) projects. If the international community truly wants to reduce the GHG emissions, the effectiveness of the existing international framework for emissions reduction needs to be reconsidered seriously, and the global cooperation mechanism also needs to be greatly enhanced
-
Qiu, Shuming; Xu, Guoai; Ahmad, Haseeb; Guo, Yanhui
2018-01-01
The Session Initiation Protocol (SIP) is an extensive and esteemed communication protocol employed to regulate signaling as well as for controlling multimedia communication sessions. Recently, Kumari et al. proposed an improved smart card based authentication scheme for SIP based on Farash's scheme. Farash claimed that his protocol is resistant against various known attacks. But, we observe some accountable flaws in Farash's protocol. We point out that Farash's protocol is prone to key-compromise impersonation attack and is unable to provide pre-verification in the smart card, efficient password change and perfect forward secrecy. To overcome these limitations, in this paper we present an enhanced authentication mechanism based on Kumari et al.'s scheme. We prove that the proposed protocol not only overcomes the issues in Farash's scheme, but it can also resist against all known attacks. We also provide the security analysis of the proposed scheme with the help of widespread AVISPA (Automated Validation of Internet Security Protocols and Applications) software. At last, comparing with the earlier proposals in terms of security and efficiency, we conclude that the proposed protocol is efficient and more secure.
-
2018-01-01
The Session Initiation Protocol (SIP) is an extensive and esteemed communication protocol employed to regulate signaling as well as for controlling multimedia communication sessions. Recently, Kumari et al. proposed an improved smart card based authentication scheme for SIP based on Farash’s scheme. Farash claimed that his protocol is resistant against various known attacks. But, we observe some accountable flaws in Farash’s protocol. We point out that Farash’s protocol is prone to key-compromise impersonation attack and is unable to provide pre-verification in the smart card, efficient password change and perfect forward secrecy. To overcome these limitations, in this paper we present an enhanced authentication mechanism based on Kumari et al.’s scheme. We prove that the proposed protocol not only overcomes the issues in Farash’s scheme, but it can also resist against all known attacks. We also provide the security analysis of the proposed scheme with the help of widespread AVISPA (Automated Validation of Internet Security Protocols and Applications) software. At last, comparing with the earlier proposals in terms of security and efficiency, we conclude that the proposed protocol is efficient and more secure. PMID:29547619
-
Alby, Pradipta Wismaya; Purwanegara, Mustika Sufiati; Desiana, Krisnati
2012-01-01
Business transformation transfigured fromvoice communication to multimedia (Voice, Data andVideo) is not inevitable in the current telecommunicationsindustry. Telkom develops IPTV (Internet ProtocolTelevision) as an effort to revitalize the Fixed Wirelinebusiness in the middle of the changing landscape of thetelecommunications industry. This IPTV service utilizesthe existing network of fixed wire telephone network(Fixed Wireline). On this technology, one cable can be usedfor various data tran...
-
Weitzman, Vanessa N; Engmann, Lawrence; DiLuigi, Andrea; Maier, Donald; Nulsen, John; Benadiva, Claudio
2009-07-01
To compare IVF outcomes in poor-responder patients undergoing stimulation after luteal phase E(2) patch/GnRH antagonist (LPG) protocol versus microdose GnRH agonist protocol. Retrospective analysis. University-based IVF center. Forty-five women undergoing ovarian stimulation for IVF using the LPG protocol were compared with 76 women stimulated with the microdose GnRH agonist protocol from May 2005 to April 2006. Cancellation rate, number of oocytes retrieved, and clinical pregnancy rates. The mean number of oocytes (9.1 +/- 4.1 vs. 8.9 +/- 4.3) and mature oocytes (6.7 +/- 3.5 vs. 6.8 +/- 3.1) retrieved were similar, as were the fertilization rates (70.0% +/- 24.2% vs. 69.9% +/- 21.5%) and the number of embryos transferred (2.5 +/- 1.1 vs. 2.7 +/- 1.3). The cancellation rate was not significantly different between the groups (13/45, 28.9% vs. 23/76, 30.3%). Likewise, there were no significant differences among the implantation rate (15.0% vs. 12.5%), clinical pregnancy rate (43.3% vs. 45.1%), and ongoing pregnancy rate per transfer (33.3% vs. 26.0%) between both groups. This study demonstrates that the use of an E(2) patch and a GnRH antagonist during the preceding luteal phase in patients with a history of failed cycles can provide similar IVF outcomes when compared with the microdose GnRH agonist protocol.
-
Reddy, K. Rasool; Rao, Ch. Madhava
2018-04-01
Currently safety is one of the primary concerns in the transmission of images due to increasing the use of images within the industrial applications. So it's necessary to secure the image facts from unauthorized individuals. There are various strategies are investigated to secure the facts. In that encryption is certainly one of maximum distinguished method. This paper gives a sophisticated Rijndael (AES) algorithm to shield the facts from unauthorized humans. Here Exponential Key Change (EKE) concept is also introduced to exchange the key between client and server. The things are exchange in a network among client and server through a simple protocol is known as Trivial File Transfer Protocol (TFTP). This protocol is used mainly in embedded servers to transfer the data and also provide protection to the data if protection capabilities are integrated. In this paper, implementing a GUI environment for image encryption and decryption. All these experiments carried out on Linux environment the usage of Open CV-Python script.
-
International Nuclear Information System (INIS)
Barratt, B.I.P.; Moeed, A.; Malone, L.A.
2006-01-01
An analysis of established biosafety protocols for release into the environment of exotic plants and biological control agents for weeds and arthropod pests has been carried out to determine whether such protocols can be applied to relatively new and emerging technologies intended for the primary production industries, such as transgenic plants. Example case studies are described to indicate the scope of issues considered by regulators who make decisions on new organism releases. No transgenic plants have been released to date in New Zealand, but two field test approvals are described as examples. An analysis of the biosafety protocols has shown that, while many of the risk criteria considered for decision-making by regulators are similar for all new organisms, a case-by-case examination of risks and potential impacts is required in order to fully assess risk. The value of post-release monitoring and validation of decisions made by regulators is emphasised
-
Energy Technology Data Exchange (ETDEWEB)
Kurnik, Charles W. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Romberger, Jeff [SBW Consulting, Inc., Bellevue, WA (United States)
2017-10-09
The HVAC Controls Evaluation Protocol is designed to address evaluation issues for direct digital controls/energy management systems/building automation systems (DDC/EMS/BAS) that are installed to control heating, ventilation, and air-conditioning (HVAC) equipment in commercial and institutional buildings. (This chapter refers to the DDC/EMS/BAS measure as HVAC controls.) This protocol may also be applicable to industrial facilities such as clean rooms and labs, which have either significant HVAC equipment or spaces requiring special environmental conditions.
-
Multimode Communication Protocols Enabling Reconfigurable Radios
Directory of Open Access Journals (Sweden)
Berlemann Lars
2005-01-01
Full Text Available This paper focuses on the realization and application of a generic protocol stack for reconfigurable wireless communication systems. This focus extends the field of software-defined radios which usually concentrates on the physical layer. The generic protocol stack comprises common protocol functionality and behavior which are extended through specific parts of the targeted radio access technology. This paper considers parameterizable modules of basic protocol functions residing in the data link layer of the ISO/OSI model. System-specific functionality of the protocol software is realized through adequate parameterization and composition of the generic modules. The generic protocol stack allows an efficient realization of reconfigurable protocol software and enables a completely reconfigurable wireless communication system. It is a first step from side-by-side realized, preinstalled modes in a terminal towards a dynamic reconfigurable anymode terminal. The presented modules of the generic protocol stack can also be regarded as a toolbox for the accelerated and cost-efficient development of future communication protocols.
-
On the need of improved Accelerated Degradation Protocols (ADPs)
DEFF Research Database (Denmark)
Pizzutilo, E.; Geiger, S.; Grote, J. P.
2016-01-01
protocol covering the whole potential range from 0.6 to 1.5 VRHE. The latter is typically not addressed in literature. This finding is explained by taking into account platinum catalyzed carbon corrosion and transient platinum dissolution. Based on the obtained results, the question is raised...... protocols that are commonly used in the fuel cell community to simulate load cycle and start-stop conditions in proton exchange membrane fuel cells (PEMFCs). In contrast to previous assumptions, claiming a separation between carbon corrosion and platinum dissolution, in both standard protocols platinum...... dissolution and carbon corrosion are present at low rates, which is also reflected by a comparably low ECSA decrease. On the other hand, a huge increase in rate of both processes is observed during transitions from low to high potential regimes experienced by a PEMFC in operation, here studied in a third...
-
IPv4 and IPv6 protocol compatibility options analysis
Directory of Open Access Journals (Sweden)
Regina Misevičienė
2013-09-01
Full Text Available The popularity of the internet has led to a very rapid growth of IPv4 (Internet Protocol v4 users. This caused a shortage of IP addresses, so it was created a new version – IPv6 (Internet Protocol v6. Currently, there are two versions of IP for IPv4 and IPv6. Due to the large differences in addressing the protocols IPv4 and IPv6 are incompatible. It is therefore necessary to find ways to move from IPv4 to IPv6. To facilitate the transition from one version to another are developed various mechanisms and strategies. Comparative analysis is done for dual stack, 6to4 tunnel and NAT64 mechanisms in this work. It has helped to reveal the shortcomings of these mechanisms and their application in selection of realization decisions.
-
Mandal, Shovon; Patnaik, Reeza; Singh, Amit Kumar; Mallick, Nirupama
2013-01-01
Biodiesel, using microalgae as feedstocks, is being explored as the most potent form of alternative diesel fuel for sustainable economic development. A comparative assessment of various protocols for microalgal lipid extraction was carried out using five green algae, six blue-green algae and two diatom species treated with different single and binary solvents both at room temperature and using a soxhlet. Lipid recovery was maximum with chloroform-methanol in the soxhlet extractor. Pretreatments ofbiomass, such as sonication, homogenization, bead-beating, lyophilization, autoclaving, microwave treatment and osmotic shock did not register any significant rise in lipid recovery. As lipid recovery using chloroform-methanol at room temperature demonstrated a marginally lower value than that obtained under the soxhlet extractor, on economical point of view, the former is recommended for microalgal total lipid extraction. Transesterification process enhances the quality of biodiesel. Experiments were designed to determine the effects of catalyst type and quantity, methanol to oil ratio, reaction temperature and time on the transesterification process using response surface methodology. Fatty acid methyl ester yield reached up to 91% with methanol:HCl:oil molar ratio of 82:4:1 at 65 degrees C for 6.4h reaction time. The biodiesel yield relative to the weight of the oil was found to be 69%.
-
Framework for managing mycotoxin risks in the food industry.
Baker, Robert C; Ford, Randall M; Helander, Mary E; Marecki, Janusz; Natarajan, Ramesh; Ray, Bonnie
2014-12-01
We propose a methodological framework for managing mycotoxin risks in the food processing industry. Mycotoxin contamination is a well-known threat to public health that has economic significance for the food processing industry; it is imperative to address mycotoxin risks holistically, at all points in the procurement, processing, and distribution pipeline, by tracking the relevant data, adopting best practices, and providing suitable adaptive controls. The proposed framework includes (i) an information and data repository, (ii) a collaborative infrastructure with analysis and simulation tools, (iii) standardized testing and acceptance sampling procedures, and (iv) processes that link the risk assessments and testing results to the sourcing, production, and product release steps. The implementation of suitable acceptance sampling protocols for mycotoxin testing is considered in some detail.
-
Goulas, Vlasios; Manganaris, George A
2012-01-01
Triterpenic acids, such as maslinic acid and oleanolic acid, are commonly found in olive fruits and have been associated with many health benefits. The drying and extraction methods, as well as the solvents used, are critical factors in the determination of their concentration in plant tissues. Thus, there is an emerging need for standardisation of an efficient extraction protocol that determines triterpenic acid content in olive fruits. To evaluate common extraction methods of triterpenic acids from olive fruits and to determine the effect of the drying method on their content in order to propose an optimum protocol for their quantification. The efficacy of different drying and extraction methods was evaluated through the quantification of maslinic acid and oleanolic acid contents using the reversed-phase HPLC technique. Data showed that ultrasonic assisted extraction with ethanol or a mixture of ethanol:methanol (1:1, v/v) resulted in the recovery of significantly higher amounts of triterpenic acids than other methods used. The drying method also affected the estimated triterpenic acid content; frozen or lyophilised olive fruit material gave higher yields of triterpenic acids compared with air-dried material at both 35°C and 105°C. This study provides a rapid and low-cost extraction method, i.e. ultrasonic assisted extraction with an eco-friendly solvent such as ethanol, from frozen or lyophilised olive fruit for the accurate determination of the triterpenic acid content in olive fruit. Copyright © 2011 John Wiley & Sons, Ltd.
-
Directory of Open Access Journals (Sweden)
Callegari Gustavo A.
2017-08-01
Full Text Available The aim of this study was to investigate the responses of creatine kinase (CK and lactate dehydrogenase (LDH after performing different resistance and aerobic exercise protocols. Twelve recreationally trained men (age, 23.2 ± 5.6 years; body mass, 84.3 ± 9.3 kg; body height, 178.9 ± 4.5 cm; and BMI, 26.3 ± 2.3 kg·m2 volunteered to participate in this study. All subjects were randomly assigned to four experimental protocols (crossover: (a aerobic training at 60% of VO2max, (b aerobic training at 80% of VO2max, (c a resistance exercise (RE session with a bi-set protocol, and (d an RE session with a multiple sets protocol. Blood samples were collected before, immediately after and 24 hours following the experimental protocols. After 24 hours, there was a significant increase in CK for the 80% of VO2max protocol vs. the bi-set RE session (p = 0.016. Immediately after the protocols, we observed a significant increase in LDH among certain groups compared to others, as follows: multiple sets RE session vs. 60% of VO2max, bi-set RE session vs. 60% of VO2max, multiple sets RE session vs. 80% of VO2max, and bi-set RE session vs. 80% of VO2max (p = 0.008, p = 0.013; p = 0.002, p = 0.004, respectively. In conclusion, aerobic exercise performed at 80% of VO2max appears to elevate plasma CK levels more than bi-set RE sessions. However, the bi-set and multiple sets RE sessions appeared to trigger greater levels of blood LDH compared to aerobic protocols performed at 60% and 80% of VO2max.
-
Fast protocol for radiochromic film dosimetry using a cloud computing web application.
Calvo-Ortega, Juan-Francisco; Pozo, Miquel; Moragues, Sandra; Casals, Joan
2017-07-01
To investigate the feasibility of a fast protocol for radiochromic film dosimetry to verify intensity-modulated radiotherapy (IMRT) plans. EBT3 film dosimetry was conducted in this study using the triple-channel method implemented in the cloud computing application (Radiochromic.com). We described a fast protocol for radiochromic film dosimetry to obtain measurement results within 1h. Ten IMRT plans were delivered to evaluate the feasibility of the fast protocol. The dose distribution of the verification film was derived at 15, 30, 45min using the fast protocol and also at 24h after completing the irradiation. The four dose maps obtained per plan were compared using global and local gamma index (5%/3mm) with the calculated one by the treatment planning system. Gamma passing rates obtained for 15, 30 and 45min post-exposure were compared with those obtained after 24h. Small differences respect to the 24h protocol were found in the gamma passing rates obtained for films digitized at 15min (global: 99.6%±0.9% vs. 99.7%±0.5%; local: 96.3%±3.4% vs. 96.3%±3.8%), at 30min (global: 99.5%±0.9% vs. 99.7%±0.5%; local: 96.5%±3.2% vs. 96.3±3.8%) and at 45min (global: 99.2%±1.5% vs. 99.7%±0.5%; local: 96.1%±3.8% vs. 96.3±3.8%). The fast protocol permits dosimetric results within 1h when IMRT plans are verified, with similar results as those reported by the standard 24h protocol. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.
-
International Nuclear Information System (INIS)
Cai Yong; He Yuxiang; Han Shukui; Wu Hao; Gong Jian; Xu Bo
2007-01-01
Objective: To compare the dose distribution of clinical target volume (CTV), in normal tissues and organs for patients with rectal cancer on the conventional radiotherapy (2D) and three dimension- al conformal radiation treatment (3DCRT). Methods: The CT image data of 36 rectal cancer patients treated with 3DCRT were studied. The CTV, small bowel, colon, bladder, pelvic bone marrow, and femoral head and neck were contoured on consecutive axial slices of CT images. Two 3DCRT and three conventional treatment planning protocols were simulated using three dimensional treatment planning system (CMS Focus 2.31), were defined as 3D-3, 3D-4, 2D-2, 2D-3, 2D-4. The difference of five treatment planning protocols on the CTV and normal structure by analysis of dose-volume histograms (DVHs) were compared. Results: The D 95 and V 95 of these five protocols all exceeded 97%. The conformity index(CI) of 3D was obviously larger than that of 2D protocol. The dose inhomogeneity(DI) in 4 DCRT was less than that of 3 DCRT. The 3D as compared with the 2D, significantly reduced the mean dose of 45 Gy to the small bowel and colon. The 3D-3 as compared with the 2D-3, the 3D-4 as compared with the 2D-4, the mean dose of small bowel and colon was reduced by 28.5% and 25.7%, respectively. The 3D-3 as compared with the 2D-2, the 3D-3 as compared with the 2D-3 and the 3D4 as compared with the 2D-4, the percentage volume of small bowel and colon which received 45 Gy was reduced by 80.8% , 51.1% and 54.7% , respectively. Either the mean dose, or the percentage volume receiving 35 Gy and 45 Gy to the pelvic bone and bladder, the 3D planning protocols had advanage over the 2D planning protocols. The V 45 of bladder in 2D-2 planning proto- col was the highest in all planning protocols, exceeding 98%, but the highest V 45 of bladder was only 50% in the other planning protocols. Conclusions: Even though the difference in pelvic CTV of rectal cancer patients between the conventional radiotherapy and 3
-
Development of a protocol for sampling and analysis of ballast water in Jamaica
Directory of Open Access Journals (Sweden)
Achsah A Mitchell
2014-09-01
Full Text Available The transfer of ballast by the international shipping industry has negatively impacted the environment. To design such a protocol for the area, the ballast water tanks of seven bulk cargo vessels entering a Jamaican port were sampled between January 28, 2010 and August 17, 2010. Vessels originated from five ports and used three main routes, some of which conducted ballast water exchange. Twenty-six preserved and 22 live replicate zooplankton samples were obtained. Abundance and richness were higher than at temperate ports. Exchange did not alter the biotic composition but reduced the abundance. Two of the live sample replicates, containing 31.67 and 16.75 viable individuals m-3, were non-compliant with the International Convention for the Control and Management of Ships’ Ballast Water and Sediments. Approximately 12% of the species identified in the ballast water were present in the waters nearest the port in 1995 and 11% were present in the entire bay in 2005. The protocol designed from this study can be used to aid the establishment of a ballast water management system in the Caribbean or used as a foundation for the development of further protocols.
-
International Nuclear Information System (INIS)
Palheiros, Franklin; Gonzaga, Reinaldo; Soares, Alexandre
2009-01-01
In the fuel cycle, converting UF 6 to UO 2 powder is an intermediate step for fabrication of pellets for fuel assemblies to be used in nuclear power plants. The basic proposal common to the different powder fabrication processes is to provide raw material capable of being processed into the form of pellets. The wet processes is the most often used industrially and are divided in two categories: the ADU (Ammonium Diuranate) and AUC (Ammonium Uranyl Carbonate) processes, whose names originate in the precipitate obtained in aqueous solution during the intermediate steps of UO 2 powder fabrication. It has known that the powder characteristics have a considerable influence in the UO 2 pellet manufacturing and quality characteristics. INB has used the AUC process to produce UO 2 pellets and supply fuel to Angra 1 and 2 Nuclear Power Plants. Despite of this process is characterized by the precipitation of a different intermediate precipitate compared to the ADU route (i.e., (NH 4 ) 4 UO 2 (CO 3 ) 3 , in the AUC process, and (NH 4 ) 2 U 2 O 7 in ADU process) leading to some slight differences in the final pellet microstructure, it has been considered that the models that predict the pellet behavior during irradiation in a nuclear reactor are basically the same compared to those used to predict the pellets form the ADU process. In order to evaluate how different the pellets originated from these two industrial routes are, this paper aims to compare the INB production historical data (Angra 1, Cycles 14 and 15) with the key parameters of a common product specification from the ADU process. (author)
-
Epistemic Protocols for Distributed Gossiping
Directory of Open Access Journals (Sweden)
Krzysztof R. Apt
2016-06-01
Full Text Available Gossip protocols aim at arriving, by means of point-to-point or group communications, at a situation in which all the agents know each other's secrets. We consider distributed gossip protocols which are expressed by means of epistemic logic. We provide an operational semantics of such protocols and set up an appropriate framework to argue about their correctness. Then we analyze specific protocols for complete graphs and for directed rings.
-
Bose, Avishek; Munir, Arslan; Shabani, Neda
2017-01-01
The hospitality industry is one of the data-rich industries that receives huge Volumes of data streaming at high Velocity with considerably Variety, Veracity, and Variability. These properties make the data analysis in the hospitality industry a big data problem. Meeting the customers' expectations is a key factor in the hospitality industry to grasp the customers' loyalty. To achieve this goal, marketing professionals in this industry actively look for ways to utilize their data in the best ...
-
Implementation and Analysis of Real-Time Streaming Protocols.
Santos-González, Iván; Rivero-García, Alexandra; Molina-Gil, Jezabel; Caballero-Gil, Pino
2017-04-12
Communication media have become the primary way of interaction thanks to the discovery and innovation of many new technologies. One of the most widely used communication systems today is video streaming, which is constantly evolving. Such communications are a good alternative to face-to-face meetings, and are therefore very useful for coping with many problems caused by distance. However, they suffer from different issues such as bandwidth limitation, network congestion, energy efficiency, cost, reliability and connectivity. Hence, the quality of service and the quality of experience are considered the two most important issues for this type of communication. This work presents a complete comparative study of two of the most used protocols of video streaming, Real Time Streaming Protocol (RTSP) and the Web Real-Time Communication (WebRTC). In addition, this paper proposes two new mobile applications that implement those protocols in Android whose objective is to know how they are influenced by the aspects that most affect the streaming quality of service, which are the connection establishment time and the stream reception time. The new video streaming applications are also compared with the most popular video streaming applications for Android, and the experimental results of the analysis show that the developed WebRTC implementation improves the performance of the most popular video streaming applications with respect to the stream packet delay.
-
Using semantics for representing experimental protocols.
Giraldo, Olga; García, Alexander; López, Federico; Corcho, Oscar
2017-11-13
An experimental protocol is a sequence of tasks and operations executed to perform experimental research in biological and biomedical areas, e.g. biology, genetics, immunology, neurosciences, virology. Protocols often include references to equipment, reagents, descriptions of critical steps, troubleshooting and tips, as well as any other information that researchers deem important for facilitating the reusability of the protocol. Although experimental protocols are central to reproducibility, the descriptions are often cursory. There is the need for a unified framework with respect to the syntactic structure and the semantics for representing experimental protocols. In this paper we present "SMART Protocols ontology", an ontology for representing experimental protocols. Our ontology represents the protocol as a workflow with domain specific knowledge embedded within a document. We also present the S ample I nstrument R eagent O bjective (SIRO) model, which represents the minimal common information shared across experimental protocols. SIRO was conceived in the same realm as the Patient Intervention Comparison Outcome (PICO) model that supports search, retrieval and classification purposes in evidence based medicine. We evaluate our approach against a set of competency questions modeled as SPARQL queries and processed against a set of published and unpublished protocols modeled with the SP Ontology and the SIRO model. Our approach makes it possible to answer queries such as Which protocols use tumor tissue as a sample. Improving reporting structures for experimental protocols requires collective efforts from authors, peer reviewers, editors and funding bodies. The SP Ontology is a contribution towards this goal. We build upon previous experiences and bringing together the view of researchers managing protocols in their laboratory work. Website: https://smartprotocols.github.io/ .
-
Esinler, I
2014-01-01
To compare the performance of microdose flare-up (MF) and flexible-multidose gonadotropin-releasing hormone (GnRH) antagonist protocols in poor responder patients who underwent intracytoplasmic sperm injection (ICSI). One hundred and 12 consecutive patients (217 cycles) suspected to have poor ovarian response were enrolled. Group 1 (MF GnRH agonist group) constituted 64 patients (135 cycles) who underwent MF GnRH agonist protocol. Group 2 (flexible-multidose GnRH antagonist group) constituted 48 patients (82 cycles) who underwent flexible-multidose GnRH antagonist protocol. The duration of stimulation (d) (11.5 +/- 2.1 vs. 10.4 +/- 2.7, p or = seven blastomeres and < 10% fragmentation at day 3 (35.9% vs. 65.1%, p < 0.05) were significantly lower in Group 1 when compared to Group 2. The number of embryos transferred (2.2 +/- 1.3 vs. 2.4 +/- 0.9), the clinical pregnancy per embryo transfer (16.3% vs. 25.8%), and the implantation rate (8.6% vs. 12.2%) were comparable between groups. Although the flexible-multidose GnRH antagonist protocol produced better oocyte and embryo parameters, the clinical pregnancy rate and the implantation rates were comparable between the flexible-multidose GnRH antagonist and MF protocols in poor responder patients.
-
Advertisement-Based Energy Efficient Medium Access Protocols for Wireless Sensor Networks
Ray, Surjya Sarathi
One of the main challenges that prevents the large-scale deployment of Wireless Sensor Networks (WSNs) is providing the applications with the required quality of service (QoS) given the sensor nodes' limited energy supplies. WSNs are an important tool in supporting applications ranging from environmental and industrial monitoring, to battlefield surveillance and traffic control, among others. Most of these applications require sensors to function for long periods of time without human intervention and without battery replacement. Therefore, energy conservation is one of the main goals for protocols for WSNs. Energy conservation can be performed in different layers of the protocol stack. In particular, as the medium access control (MAC) layer can access and control the radio directly, large energy savings is possible through intelligent MAC protocol design. To maximize the network lifetime, MAC protocols for WSNs aim to minimize idle listening of the sensor nodes, packet collisions, and overhearing. Several approaches such as duty cycling and low power listening have been proposed at the MAC layer to achieve energy efficiency. In this thesis, I explore the possibility of further energy savings through the advertisement of data packets in the MAC layer. In the first part of my research, I propose Advertisement-MAC or ADV-MAC, a new MAC protocol for WSNs that utilizes the concept of advertising for data contention. This technique lets nodes listen dynamically to any desired transmission and sleep during transmissions not of interest. This minimizes the energy lost in idle listening and overhearing while maintaining an adaptive duty cycle to handle variable loads. Additionally, ADV-MAC enables energy efficient MAC-level multicasting. An analytical model for the packet delivery ratio and the energy consumption of the protocol is also proposed. The analytical model is verified with simulations and is used to choose an optimal value of the advertisement period
-
Polyethylene glycol 3350 based colon cleaning protocol: 2 d vs 4 d head to head comparison.
Elitsur, Rotem; Butcher, Lisa; Vicki, Lund; Elitsur, Yoram
2013-04-16
To compare between 2 and 4 d colon cleansing protocols. Children who were scheduled for colonoscopy procedure (2010-2012) for various medical reasons, were recruited from the pediatric gastroenterology clinic at Marshall University School of Medicine, Huntington, WV. Exclusion criteria were patients who were allergic to the medication used in the protocols [polyethylene glycol (PEG) 3350, Bisacodyl], or children with metabolic or renal diseases. Two PEG 3350 protocols for 4 d (A) and 2 d (B) were prescribed as previously described. A questionnaire describing the volume of PEG consumed, clinical data, and side effects were recorded. Colon preparation was graded by two observers according to previously described method. Rate of adequate colon preparation. A total of 78 patients were considered for final calculation (group A: 40, group B: 38). Age and stool consistency at the last day was comparable in both groups, but the number of stools/day was significantly higher in group B (P = 0.001). Adequate colon preparation was reached in 57.5% (A) and 73.6% (B), respectively (P = 0.206). Side effects were minimal and comparable in both groups. There was no difference in children's age, stool characteristics, or side effects between the children with adequate or inadequate colon preparation. Correlation and agreement between observers was excellent (Pearson correlation = 0.972, kappa = 1.0). No difference between protocols was observed, but the 2 d protocol was superior for its shorter time. Direct comparison between different colon cleansing protocols is crucial in order to establish the "gold standard" protocol for children.
-
Energy Technology Data Exchange (ETDEWEB)
Fernandes, Peter; Prabhu, K. Narayan [Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal, P.O. Srinivasnagar 575 025 Mangalore, Karnataka State (India)
2008-02-15
An investigation was conducted to study the suitability of vegetable oils as bioquenchants for industrial heat treatment. The study involved the assessment of the severity of quenching and wetting behaviour of conventional and vegetable oil quench media. Quench severities of sunflower, coconut and palm oils were found to be greater than mineral oil. The quench severity of aqueous media is greater than oil media although their wettability is poor as indicated by their higher contact angles. A dimensionless contact angle parameter defined in this work is found to be a better parameter to compare the wetting behaviour with heat transfer. (author)
-
Secret science: tobacco industry research on smoking behaviour and cigarette toxicity.
Hammond, David; Collishaw, Neil E; Callard, Cynthia
2006-03-04
A lack of scientific data remains the principal obstacle to regulating cigarette toxicity. In particular, there is an immediate need to improve our understanding of the interaction between smoking behaviour and product design, and its influence on cigarette deliveries. This article reviews internal tobacco industry documents on smoking behaviour research undertaken by Imperial Tobacco Limited (ITL) and British-American Tobacco (BAT). BAT documents indicate that smokers vary their puffing behaviour to regulate nicotine levels and compensate for low-yield cigarettes by smoking them more intensely. BAT research also shows that the tar and nicotine delivered to smokers is substantially greater than the machine-smoked yields reported to consumers and regulators. Internal documents describe a strategy to maximise this discrepancy through product design. In particular, BAT developed elastic cigarettes that produced low yields under standard testing protocols, whereas in consumers' hands they elicited more intensive smoking and provided higher concentrations of tar and nicotine to smokers. Documents also show that BAT pursued this product strategy despite the health risks to consumers and ethical concerns raised by senior scientists, and paired it with an equally successful marketing campaign that promoted these cigarettes as low-tar alternatives for health-concerned smokers. Overall, the documents seem to reveal a product strategy intended to exploit the limitations of the testing protocols and to intentionally conceal from consumers and regulators the potential toxicity of BAT products revealed by BAT's own research. Tobacco industry research underscores the serious limitations of the current cigarette testing protocols and the documents describe deceptive business practices that remain in place.
-
A routing protocol based on energy and link quality for Internet of Things applications.
Machado, Kássio; Rosário, Denis; Cerqueira, Eduardo; Loureiro, Antonio A F; Neto, Augusto; Souza, José Neuman de
2013-02-04
The Internet of Things (IoT) is attracting considerable attention from the universities, industries, citizens and governments for applications, such as healthcare, environmental monitoring and smart buildings. IoT enables network connectivity between smart devices at all times, everywhere, and about everything. In this context, Wireless Sensor Networks (WSNs) play an important role in increasing the ubiquity of networks with smart devices that are low-cost and easy to deploy. However, sensor nodes are restricted in terms of energy, processing and memory. Additionally, low-power radios are very sensitive to noise, interference and multipath distortions. In this context, this article proposes a routing protocol based on Routing by Energy and Link quality (REL) for IoT applications. To increase reliability and energy-efficiency, REL selects routes on the basis of a proposed end-to-end link quality estimator mechanism, residual energy and hop count. Furthermore, REL proposes an event-driven mechanism to provide load balancing and avoid the premature energy depletion of nodes/networks. Performance evaluations were carried out using simulation and testbed experiments to show the impact and benefits of REL in small and large-scale networks. The results show that REL increases the network lifetime and services availability, as well as the quality of service of IoT applications. It also provides an even distribution of scarce network resources and reduces the packet loss rate, compared with the performance of well-known protocols.
-
A Routing Protocol Based on Energy and Link Quality for Internet of Things Applications
Directory of Open Access Journals (Sweden)
Antonio A. F. Loureiro
2013-02-01
Full Text Available The Internet of Things (IoT is attracting considerable attention from the universities, industries, citizens and governments for applications, such as healthcare, environmental monitoring and smart buildings. IoT enables network connectivity between smart devices at all times, everywhere, and about everything. In this context, Wireless Sensor Networks (WSNs play an important role in increasing the ubiquity of networks with smart devices that are low-cost and easy to deploy. However, sensor nodes are restricted in terms of energy, processing and memory. Additionally, low-power radios are very sensitive to noise, interference and multipath distortions. In this context, this article proposes a routing protocol based on Routing by Energy and Link quality (REL for IoT applications. To increase reliability and energy-efficiency, REL selects routes on the basis of a proposed end-to-end link quality estimator mechanism, residual energy and hop count. Furthermore, REL proposes an event-driven mechanism to provide load balancing and avoid the premature energy depletion of nodes/networks. Performance evaluations were carried out using simulation and testbed experiments to show the impact and benefits of REL in small and large-scale networks. The results show that REL increases the network lifetime and services availability, as well as the quality of service of IoT applications. It also provides an even distribution of scarce network resources and reduces the packet loss rate, compared with the performance of well-known protocols.
-
A Routing Protocol Based on Energy and Link Quality for Internet of Things Applications
Machado, Kassio; Rosário, Denis; Cerqueira, Eduardo; Loureiro, Antonio A. F.; Neto, Augusto; de Souza, José Neuman
2013-01-01
The Internet of Things (IoT) is attracting considerable attention from the universities, industries, citizens and governments for applications, such as healthcare,environmental monitoring and smart buildings. IoT enables network connectivity between smart devices at all times, everywhere, and about everything. In this context, Wireless Sensor Networks (WSNs) play an important role in increasing the ubiquity of networks with smart devices that are low-cost and easy to deploy. However, sensor nodes are restricted in terms of energy, processing and memory. Additionally, low-power radios are very sensitive to noise, interference and multipath distortions. In this context, this article proposes a routing protocol based on Routing by Energy and Link quality (REL) for IoT applications. To increase reliability and energy-efficiency, REL selects routes on the basis of a proposed end-to-end link quality estimator mechanism, residual energy and hop count. Furthermore, REL proposes an event-driven mechanism to provide load balancing and avoid the premature energy depletion of nodes/networks. Performance evaluations were carried out using simulation and testbed experiments to show the impact and benefits of REL in small and large-scale networks. The results show that REL increases the network lifetime and services availability, as well as the quality of service of IoT applications. It also provides an even distribution of scarce network resources and reduces the packet loss rate, compared with the performance of well-known protocols. PMID:23385410
-
A mechanical protocol to replicate impact in walking footwear.
Price, Carina; Cooper, Glen; Graham-Smith, Philip; Jones, Richard
2014-01-01
Impact testing is undertaken to quantify the shock absorption characteristics of footwear. The current widely reported mechanical testing method mimics the heel impact in running and therefore applies excessive energy to walking footwear. The purpose of this study was to modify the ASTM protocol F1614 (Procedure A) to better represent walking gait. This was achieved by collecting kinematic and kinetic data while participants walked in four different styles of walking footwear (trainer, oxford shoe, flip-flop and triple-density sandal). The quantified heel-velocity and effective mass at ground-impact were then replicated in a mechanical protocol. The kinematic data identified different impact characteristics in the footwear styles. Significantly faster heel velocity towards the floor was recorded walking in the toe-post sandals (flip-flop and triple-density sandal) compared with other conditions (e.g. flip-flop: 0.36±0.05 ms(-1) versus trainer: 0.18±0.06 ms(-1)). The mechanical protocol was adapted by altering the mass and drop height specific to the data captured for each shoe (e.g. flip-flop: drop height 7 mm, mass 16.2 kg). As expected, the adapted mechanical protocol produced significantly lower peak force and accelerometer values than the ASTM protocol (pfootwear style specific. Copyright © 2014 Elsevier B.V. All rights reserved.
-
Lemouzy, B; Garnier, J-C
2010-01-01
The goal of the LHCb readout upgrade is to speed up the DAQ to 40 MHz. Such a DAQ system will certainly employ 10 Gigabit or similar technologies and might also need new networking protocols such as a customized, light-weight TCP or more specialised protocols. A test module is being implemented, which integrates in the existing LHCb infrastructure. It is a multiple 10-Gigabit traffic generator, driven by a Stratix IV FPGA, which is flexibile enough to either generate LHCb's raw data packets internally or read them from external storage via the network. For reading the data we have implemented a light-weight industry standard protocol ATA over Ethernet (AoE) and we present an outlook of using a filesystem on these network-exported disk-drivers.
-
Understanding protocol performance: impact of test performance.
Turner, Robert G
2013-01-01
This is the second of two articles that examine the factors that determine protocol performance. The objective of these articles is to provide a general understanding of protocol performance that can be used to estimate performance, establish limits on performance, decide if a protocol is justified, and ultimately select a protocol. The first article was concerned with protocol criterion and test correlation. It demonstrated the advantages and disadvantages of different criterion when all tests had the same performance. It also examined the impact of increasing test correlation on protocol performance and the characteristics of the different criteria. To examine the impact on protocol performance when individual tests in a protocol have different performance. This is evaluated for different criteria and test correlations. The results of the two articles are combined and summarized. A mathematical model is used to calculate protocol performance for different protocol criteria and test correlations when there are small to large variations in the performance of individual tests in the protocol. The performance of the individual tests that make up a protocol has a significant impact on the performance of the protocol. As expected, the better the performance of the individual tests, the better the performance of the protocol. Many of the characteristics of the different criteria are relatively independent of the variation in the performance of the individual tests. However, increasing test variation degrades some criteria advantages and causes a new disadvantage to appear. This negative impact increases as test variation increases and as more tests are added to the protocol. Best protocol performance is obtained when individual tests are uncorrelated and have the same performance. In general, the greater the variation in the performance of tests in the protocol, the more detrimental this variation is to protocol performance. Since this negative impact is increased as
-
Perancangan dan Analisis Redistribution Routing Protocol OSPF dan EIGRP
Directory of Open Access Journals (Sweden)
DWI ARYANTA
2016-02-01
Full Text Available Abstrak OSPF (Open Shortest Path First dan EIGRP (Enhanced Interior Gateway Routing Protocol adalah dua routing protokol yang banyak digunakan dalam jaringan komputer. Perbedaan karakteristik antar routing protokol menimbulkan masalah dalam pengiriman paket data. Teknik redistribution adalah solusi untuk melakukan komunikasi antar routing protokol. Dengan menggunakan software Cisco Packet Tracer 5.3 pada penelitian ini dibuat simulasi OSPF dan EIGRP yang dihubungkan oleh teknik redistribution, kemudian dibandingkan kualitasnya dengan single routing protokol EIGRP dan OSPF. Parameter pengujian dalam penelitian ini adalah nilai time delay dan trace route. Nilai trace route berdasarkan perhitungan langsung cost dan metric dibandingkan dengan hasil simulasi. Hasilnya dapat dilakukan proses redistribution OSPF dan EIGRP. Nilai delay redistribution lebih baik 1% dibanding OSPF dan 2-3% di bawah EIGRP tergantung kepadatan traffic. Dalam perhitungan trace route redistribution dilakukan 2 perhitungan, yaitu cost untuk area OSPF dan metric pada area EIGRP. Pengambilan jalur utama dan alternatif pengiriman paket berdasarkan nilai cost dan metric yang terkecil, hal ini terbukti berdasarkan perhitungan dan simulasi. Kata kunci: OSPF, EIGRP, Redistribution, Delay, Cost, Metric. Abstract OSPF (Open Shortest Path First and EIGRP (Enhanced Interior Gateway Routing Protocol are two routing protocols are widely used in computer networks. Differences between the characteristics of routing protocols pose a problem in the delivery of data packets. Redistribution technique is the solution for communication between routing protocols. By using the software Cisco Packet Tracer 5.3 in this study were made simulating OSPF and EIGRP redistribution linked by technique, then compared its quality with a single EIGRP and OSPF routing protocols. Testing parameters in this study is the value of the time delay and trace route. Value trace route based on direct calculation of cost
-
[Effect of a multidisciplinar protocol on the clinical results obtained after bariatric surgery].
Cánovas Gaillemin, B; Sastre Martos, J; Moreno Segura, G; Llamazares Iglesias, O; Familiar Casado, C; Abad de Castro, S; López Pardo, R; Sánchez-Cabezudo Muñoz, M A
2011-01-01
Bariatric surgery has been shown to be an effective therapy for weight loss in patients with severe obesity, and the implementation of a multidisciplinar management protocol is recommended. To assess the usefulness of the implementation of a management protocol in obesity surgery based on the Spanish Consensus Document of the SEEDO. Retrospective comparative study of the outcomes in patients previously operated (51 patients) and after the implementation of the protocol (66 patients). The following data were gathered: anthropometry, pre-and post-surgery comorbidities, post-surgical nutritional and surgical complications, validated Quality of Life questionnaire, and dietary habits. Withdrawals (l7.6%) and alcoholism (5.8%) were higher in patients pre- versus post-implementation of the protocol (4.5% vs. 3%, respectively), the differences being statistically significant. The mortality rate was 2% in the pre-protocol group and 0% in the postprotocol group. The dietary habits were better in the post-protocol group, the pre-protocol group presenting a higher percentage of feeding-behavior disorders (5.1%) although not reaching a statistical significance. The improvement in quality of life was higher in the post-protocol group for all items, but only reaching statistical significance in sexual activity (p = 0.004). In the pre-protocol group, 70.5% of the patients had more than one nutritional complication vs. 32.8% in the post-protocol group (p 50% in 81.3% in the pre-protocol group vs. 74.8% in the pos-protocol group) or the comorbidities. Bariatric surgery achieves excellent outcomes in weight loss, comorbidities, and quality of life, but presents nutritional, surgical, and psychiatric complications that require a protocol-based and multidisciplinary approach. Our protocol improves the outcomes regarding the withdrawal rates, feeding-behavior disorders, dietary habits, nutritional complications, and quality of life.
-
Biomonitoring for the photovoltaics industry
Energy Technology Data Exchange (ETDEWEB)
Bernholc, N.M.; Moskowitz, P.D.
1995-07-01
Biomonitoring often is used as a method for estimating the dose to an individual. Therefore, a parameter of measurement, or biomarkers must be identified. The purpose of this paper is to give an overview of biomonitoring protocols for metals used in the photovoltaics industry. Special attention is given to areas that often are skimmed over, to gain insights into some of the problems that may arise when these tasks are carried out. Biological monitoring can be used to determine current human exposures to chemicals, as well as to detect past exposures, and the effects that these exposures may have on human health. It is used in conjunction with environmental monitoring to describe more completely worker`s exposures to, and absorption of, chemicals in the workplace. Biological specimens (e.g., blood, hair or urine) are analyzed for chemical agents, metabolites, or for some specific effect on the person (Lowry 1994). Biomonitoring can assess a workers exposure to industrial chemicals by all routes including skin absorption and ingestion. Although the methodology still is in its infancy, in cases where the procedures have been developed, it can be an invaluable component of an ongoing program of industrial hygiene monitoring. Like any technology, there are limitations to its effectiveness because of a lack of knowledge, contamination of specimens, and the introduction of errors.
-
Static Validation of Security Protocols
DEFF Research Database (Denmark)
Bodei, Chiara; Buchholtz, Mikael; Degano, P.
2005-01-01
We methodically expand protocol narrations into terms of a process algebra in order to specify some of the checks that need to be made in a protocol. We then apply static analysis technology to develop an automatic validation procedure for protocols. Finally, we demonstrate that these techniques ...... suffice to identify several authentication flaws in symmetric and asymmetric key protocols such as Needham-Schroeder symmetric key, Otway-Rees, Yahalom, Andrew secure RPC, Needham-Schroeder asymmetric key, and Beller-Chang-Yacobi MSR...
-
Climate change ratification of the Kyoto Protocol : clearing the air on the debate
International Nuclear Information System (INIS)
2002-01-01
The Kyoto Protocol on Climate Change would commit Canada to limit emissions of greenhouse gases to 6 per cent below 1990 levels by 2008-2012. The Canadian Chamber of Commerce has outlined the following 3 key prerequisites that the federal government should and will have in place before any decision on ratification is made: (1) a detailed plan for achieving the Kyoto reductions, (2) a detailed analysis of environmental and economic impacts associated with Kyoto implementation, and (3) consultations with all stakeholder and the Canadian public once the plan has been released. Currently, Canadian businesses are taking voluntary actions to reduce industrial sector emissions through programs such as the Canadian Industry Program for Energy Conservation. Between 1990 and 1999, industrial sector emissions fell by 6 per cent. However, it was emphasized that despite these efforts, the gap between Canada's Kyoto target and its current greenhouse gas emissions continues to grow because of population and economic growth and rising exports. At the current rate of growth, it is estimated that meeting the Kyoto target could cost the economy up to $30 billion in 2010. The paper also discusses the implementation of key flexibility mechanisms such as carbon sinks, Joint Implementation, the Clean Development Mechanism and credits for export of cleaner energy to the United States, a non-Kyoto country. It is argued that ratification of Kyoto could hurt investments and impact jobs in Canada by making Canadian industries uncompetitive relative to their American counterparts. It is emphasized that full participation by the Canadian public is required in adapting to major lifestyle changes to reduce the use of fossil fuels and other sources of greenhouse gases. In conclusion, the Canadian Chamber of Commerce does not believe that the Kyoto Protocol is the most effective and efficient way of moving forward on the climate change issue and recommends that the federal government develop a made
-
An Efficient Wireless Sensor Network for Industrial Monitoring and Control
Aponte-Luis, Juan; Gómez-Bravo, Fernando; Sánchez-Raya, Manuel; Alcina-Espigado, Javier; Teixido-Rovira, Pedro Miguel
2018-01-01
This paper presents the design of a wireless sensor network particularly designed for remote monitoring and control of industrial parameters. The article describes the network components, protocol and sensor deployment, aimed to accomplish industrial constraint and to assure reliability and low power consumption. A particular case of study is presented. The system consists of a base station, gas sensing nodes, a tree-based routing scheme for the wireless sensor nodes and a real-time monitoring application that operates from a remote computer and a mobile phone. The system assures that the industrial safety quality and the measurement and monitoring system achieves an efficient industrial monitoring operations. The robustness of the developed system and the security in the communications have been guaranteed both in hardware and software level. The system is flexible and can be adapted to different environments. The testing of the system confirms the feasibility of the proposed implementation and validates the functional requirements of the developed devices, the networking solution and the power consumption management. PMID:29320466
-
An Efficient Wireless Sensor Network for Industrial Monitoring and Control
Directory of Open Access Journals (Sweden)
Juan Aponte-Luis
2018-01-01
Full Text Available This paper presents the design of a wireless sensor network particularly designed for remote monitoring and control of industrial parameters. The article describes the network components, protocol and sensor deployment, aimed to accomplish industrial constraint and to assure reliability and low power consumption. A particular case of study is presented. The system consists of a base station, gas sensing nodes, a tree-based routing scheme for the wireless sensor nodes and a real-time monitoring application that operates from a remote computer and a mobile phone. The system assures that the industrial safety quality and the measurement and monitoring system achieves an efficient industrial monitoring operations. The robustness of the developed system and the security in the communications have been guaranteed both in hardware and software level. The system is flexible and can be adapted to different environments. The testing of the system confirms the feasibility of the proposed implementation and validates the functional requirements of the developed devices, the networking solution and the power consumption management.
-
Comparative Study of the Housing Industry Performance in country
Directory of Open Access Journals (Sweden)
Hamid Sepehrdoust
2011-03-01
Full Text Available The aim of this study is to measure the technical efficiency of housing construction in Iran and also to define current status of the housing industry system and its future in the country. Data Envelopment Analysis (DEA and the input based model of CCR with fixed return to scale have been used to evaluate housing industry performance in different states of Iran during the years 2006-2009. The complementary BCC approach with assumption of variable return to scale has been used for dividing technical efficiency to management and scale efficiencies. The findings imply that the average efficiency score obtained by all the states is 0.94 and only 37 percent of the states operate technically efficient. On the other hand, about 63 percent of the states are found as relatively inefficient and mostly present decreasing return to scale. Also, it has been found that the inefficient states have management inefficiency in utilizing construction inputs. Without any doubt, managerial and supportive assistance of the government to inefficient states, motivating construction employees to proper jobs and knowledge development in optimum assignment of construction factors could be appropriate solutions for the problems of the housing sector.
-
A DUAL RESERVATION CDMA-BASED MAC PROTOCOL WITH POWER CONTROL FOR AD HOC NETWORKS
Institute of Scientific and Technical Information of China (English)
Jia Min; Chen Huimin; Yuan Yuhua
2007-01-01
This paper proposes a new multi-channel Medium Access Control (MAC) protocol named as Dual Reservation Code Division Multiple Access (CDMA) based MAC protocol with Power Control (DRCPC). The code channel is divided into common channel, broadcast channel and several data channels. And dynamic power control mechanism is implemented to reduce near-far interference. Compared with IEEE 802.11 Distributed Coordination Function (DCF) protocol, the results show that the proposed mechanism improves the average throughput and limits the transmission delay efficiently.
-
International Nuclear Information System (INIS)
Langer, R. D.; Gorkom, K. Neidl van.; Kaabi, Ho Al.; Torab, F.; Czechowski, J.; Nagi, M.; Ashish, G. M.
2007-01-01
Full text: The aim of the study was to validate a multimodality cranial computed tomography (CCT) protocol for patients with acute stroke in the United Arab Emirates as a basic imaging procedure for a stroke unit. Therefore, a comparative study was conducted between two groups: retrospective, historical group 1 with early unenhanced CCT and prospective group 2 undergoing a multimodality CCT protocol. Follow-up unenhanced CCT >48 h served as gold standard in both groups. Group 1: Early unenhanced CCT of 50 patients were evaluated retrospectively, using Alberta Stroke Program Early CT Score, and compared with the definite infarction on follow-up CCT. Group 2: 50 patients underwent multimodality CCT (unenhanced CCT, perfusion studies: cerebral blood flow, cerebral blood volume, mean transit time and CT angiography) <8 h after clinical onset and follow-up studies. Modified National Institute of Health Stroke Scale was used clinically in both groups. Group 1 showed 38 men, 12 women, clinical onset 2-8 h before CCT and modified National Institute of Health Stroke Scale 0-28. Group 2 included 38 men, 12 women, onset 3-8 h before CCT, modified National Institute of Health Stroke Scale 0-28. Sensitivity was 58.3% in group 1 and 84.2% in group 2. Computed tomography angiography detected nine intracranial occlusions/stenoses. The higher sensitivity of the multimodality CCT protocol justifies its use as a basic diagnostic tool for the set-up of a first-stroke unit in the United Arab Emirates
-
A class-chest for deriving transport protocols
Energy Technology Data Exchange (ETDEWEB)
Strayer, W.T.
1996-10-01
Development of new transport protocols or protocol algorithms suffers from the complexity of the environment in which they are intended to run. Modeling techniques attempt to avoid this by simulating the environment. Another approach to promoting rapid prototyping of protocols and protocol algorithms is to provide a pre-built infrastructure that is common to transport protocols, so that the focus is placed on the protocol-specific aspects. The Meta-Transport Library is a library of C++ base classes that implement or abstract out the mundane functions of a protocol, new protocol implementations are derived from base classes. The result is a fully viable user- level transport protocol implementation, with emphasis on modularity. The collection of base classes form a ``class-chest`` of tools .from which protocols can be developed and studied with as little change to a normal UNIX environment as possible.
-
van der Heijden, Amber A W A; de Bruijne, Martine C; Feenstra, Talitha L; Dekker, Jacqueline M; Baan, Caroline A; Bosmans, Judith E; Bot, Sandra D M; Donker, Gé A; Nijpels, Giel
2014-06-25
The increasing prevalence of diabetes is associated with increased health care use and costs. Innovations to improve the quality of care, manage the increasing demand for health care and control the growth of health care costs are needed. The aim of this study is to evaluate the care process and costs of managed, protocolized and usual care for type 2 diabetes patients from a societal perspective. In two distinct regions of the Netherlands, both managed and protocolized diabetes care were implemented. Managed care was characterized by centralized organization, coordination, responsibility and centralized annual assessment. Protocolized care had a partly centralized organizational structure. Usual care was characterized by a decentralized organizational structure. Using a quasi-experimental control group pretest-posttest design, the care process (guideline adherence) and costs were compared between managed (n = 253), protocolized (n = 197), and usual care (n = 333). We made a distinction between direct health care costs, direct non-health care costs and indirect costs. Multivariate regression models were used to estimate differences in costs adjusted for confounding factors. Because of the skewed distribution of the costs, bootstrapping methods (5000 replications) with a bias-corrected and accelerated approach were used to estimate 95% confidence intervals (CI) around the differences in costs. Compared to usual and protocolized care, in managed care more patients were treated according to diabetes guidelines. Secondary health care use was higher in patients under usual care compared to managed and protocolized care. Compared to usual care, direct costs were significantly lower in managed care (€-1.181 (95% CI: -2.597 to -334)) while indirect costs were higher (€ 758 (95% CI: -353 to 2.701), although not significant. Direct, indirect and total costs were lower in protocolized care compared to usual care (though not significantly). Compared to usual care, managed
-
Directory of Open Access Journals (Sweden)
Shahid Latif
2018-01-01
Full Text Available Industrial Internet of Things (IIoT is the other name of industrial Internet. It integrates a variety of existing industrial automation technologies with computing, machine learning, and communication technologies. Vehicular ad hoc network, an application of IIoT, is a self-organized network of vehicles which tends to provide improved road safety, diminished traffic congestion, and ultimate comfort to the travellers. In VANETs, vehicles exchange data with each other directly or through roadside units (RSUs. Data dissemination in VANETs experiences numerous challenging issues including broadcast storm, network partitions, intermittent connectivity between vehicles, and limited bandwidth. In literature, various data dissemination schemes are proposed. However, most of these schemes are designed for either urban or highway VANET scenarios and evaluated under sparse or dense traffic conditions. Moreover, these schemes do not effectively overcome the aforementioned issues simultaneously. In this paper, we present a new data dissemination protocol for VANETs, which disseminates the emergency messages in different scenarios under varying traffic conditions. During dense traffic conditions, DDP4V employs the segmentation of transmission region of a vehicle in order to select the most appropriate next forwarding vehicle (NFV. Accordingly, it divides the transmission region of a vehicle in three distinct segments and selects vehicle(s inside the highest priority segment to forward the message to all neighbour vehicles, whereas it also uses implicit acknowledgements for guaranteed message delivery during sparse traffic Conditions. Simulation results show that DDP4V protocol outperforms the other existing related protocols in terms of coverage, network overhead, collision, and end-to-end delay.
-
Effects of Modification of Pain Protocol on Incidence of Post Operative Nausea and Vomiting.
Schwarzkopf, Ran; Snir, Nimrod; Sharfman, Zachary T; Rinehart, Joseph B; Calderon, Michael-David; Bahn, Esther; Harrington, Brian; Ahn, Kyle
2016-01-01
A Perioperative Surgical Home (PSH) care model applies a standardized multidisciplinary approach to patient care using evidence-based medicine to modify and improve protocols. Analysis of patient outcome measures, such as postoperative nausea and vomiting (PONV), allows for refinement of existing protocols to improve patient care. We aim to compare the incidence of PONV in patients who underwent primary total joint arthroplasty before and after modification of our PSH pain protocol. All total joint replacement PSH (TJR-PSH) patients who underwent primary THA (n=149) or TKA (n=212) in the study period were included. The modified protocol added a single dose of intravenous (IV) ketorolac given in the operating room and oxycodone immediate release orally instead of IV Hydromorphone in the Post Anesthesia Care Unit (PACU). The outcomes were (1) incidence of PONV and (2) average pain score in the PACU. We also examined the effect of primary anesthetic (spinal vs . GA) on these outcomes. The groups were compared using chi-square tests of proportions. The incidence of post-operative nausea in the PACU decreased significantly with the modified protocol (27.4% vs . 38.1%, p=0.0442). There was no difference in PONV based on choice of anesthetic or procedure. Average PACU pain scores did not differ significantly between the two protocols. Simple modifications to TJR-PSH multimodal pain management protocol, with decrease in IV narcotic use, resulted in a lower incidence of postoperative nausea, without compromising average PACU pain scores. This report demonstrates the need for continuous monitoring of PSH pathways and implementation of revisions as needed.
-
Automatic Validation of Protocol Narration
DEFF Research Database (Denmark)
Bodei, Chiara; Buchholtz, Mikael; Degano, Pierpablo
2003-01-01
We perform a systematic expansion of protocol narrations into terms of a process algebra in order to make precise some of the detailed checks that need to be made in a protocol. We then apply static analysis technology to develop an automatic validation procedure for protocols. Finally, we...
-
Accelerating the implementation of the clean development mechanism in South African industry
Directory of Open Access Journals (Sweden)
G Little
2014-05-01
Full Text Available One of the responses to the threat of global warming is the Kyoto Protocol and the associated Clean Development Mechanism (CDM to reduce greenhouse gases. South Africa is an ideal country for the implementation of industrial CDM projects, yet lags behind many other countries. This qualitative research determines the factors that cause South Africa to lag other developing countries in the implementation of industrial CDM projects and the interventions that will have the most impact on accelerating implementation. The research involved interviews with 30 experts involved in the South African CDM process. The results identify the factors perceived to be facilitating and inhibiting the use of CDM opportunities and a framework for CDM practitioners to develop an implementation strategy within South African industry is established.
-
ABORt: Acknowledgement-Based Opportunistic Routing Protocol for High Data Rate Multichannel WSNs
Directory of Open Access Journals (Sweden)
Hamadoun Tall
2017-10-01
Full Text Available The ease of deployment and the auto-configuration capabilities of Wireless Sensor Networks (WSNs make them very attractive in different domains like environmental, home automation or heath care applications. The use of multichannel communications in WSNs helps to improve the overall performance of the network. However, in heavy traffic scenarios, routing protocols should be adapted to allow load balancing and to avoid losing data packets due to congestion and queue overflow. In this paper, we present an Acknowledgement-Based Opportunistic Routing (ABORt protocol designed for high data rate multichannel WSNs. It is a low overhead protocol that does not rely on synchronization for control traffic exchange during the operational phase of the network. ABORt is an opportunistic protocol that relies on link layer acknowledgements to disseminate routing metrics, which helps to reduce overhead. The performance of ABORt is evaluated using the Cooja simulator and the obtained results show that ABORt has a high packet delivery ratio with reduced packet end-to-end delay compared to two single channel routing protocols and two multichannel routing protocols that use number of hops and expected transmission count as routing metrics.
-
Liu, Zhe; Geng, Yong; Zhang, Pan; Dong, Huijuan; Liu, Zuoxi
2014-09-01
In China, local governments of many areas prefer to give priority to the development of heavy industrial clusters in pursuit of high value of gross domestic production (GDP) growth to get political achievements, which usually results in higher costs from ecological degradation and environmental pollution. Therefore, effective methods and reasonable evaluation system are urgently needed to evaluate the overall efficiency of industrial clusters. Emergy methods links economic and ecological systems together, which can evaluate the contribution of ecological products and services as well as the load placed on environmental systems. This method has been successfully applied in many case studies of ecosystem but seldom in industrial clusters. This study applied the methodology of emergy analysis to perform the efficiency of industrial clusters through a series of emergy-based indices as well as the proposed indicators. A case study of Shenyang Economic Technological Development Area (SETDA) was investigated to show the emergy method's practical potential to evaluate industrial clusters to inform environmental policy making. The results of our study showed that the industrial cluster of electric equipment and electronic manufacturing produced the most economic value and had the highest efficiency of energy utilization among the four industrial clusters. However, the sustainability index of the industrial cluster of food and beverage processing was better than the other industrial clusters.
-
Differential Globalization of Industry- and Non-Industry-Sponsored Clinical Trials.
Atal, Ignacio; Trinquart, Ludovic; Porcher, Raphaël; Ravaud, Philippe
2015-01-01
Mapping the international landscape of clinical trials may inform global health research governance, but no large-scale data are available. Industry or non-industry sponsorship may have a major influence in this mapping. We aimed to map the global landscape of industry- and non-industry-sponsored clinical trials and its evolution over time. We analyzed clinical trials initiated between 2006 and 2013 and registered in the WHO International Clinical Trials Registry Platform (ICTRP). We mapped single-country and international trials by World Bank's income groups and by sponsorship (industry- vs. non- industry), including its evolution over time from 2006 to 2012. We identified clusters of countries that collaborated significantly more than expected in industry- and non-industry-sponsored international trials. 119,679 clinical trials conducted in 177 countries were analysed. The median number of trials per million inhabitants in high-income countries was 100 times that in low-income countries (116.0 vs. 1.1). Industry sponsors were involved in three times more trials per million inhabitants than non-industry sponsors in high-income countries (75.0 vs. 24.5) and in ten times fewer trials in low- income countries (0.08 vs. 1.08). Among industry- and non-industry-sponsored trials, 30.3% and 3.2% were international, respectively. In the industry-sponsored network of collaboration, Eastern European and South American countries collaborated more than expected; in the non-industry-sponsored network, collaboration among Scandinavian countries was overrepresented. Industry-sponsored international trials became more inter-continental with time between 2006 and 2012 (from 54.8% to 67.3%) as compared with non-industry-sponsored trials (from 42.4% to 37.2%). Based on trials registered in the WHO ICTRP we documented a substantial gap between the globalization of industry- and non-industry-sponsored clinical research. Only 3% of academic trials but 30% of industry trials are
-
MAC Protocol for Ad Hoc Networks Using a Genetic Algorithm
Elizarraras, Omar; Panduro, Marco; Méndez, Aldo L.
2014-01-01
The problem of obtaining the transmission rate in an ad hoc network consists in adjusting the power of each node to ensure the signal to interference ratio (SIR) and the energy required to transmit from one node to another is obtained at the same time. Therefore, an optimal transmission rate for each node in a medium access control (MAC) protocol based on CSMA-CDMA (carrier sense multiple access-code division multiple access) for ad hoc networks can be obtained using evolutionary optimization. This work proposes a genetic algorithm for the transmission rate election considering a perfect power control, and our proposition achieves improvement of 10% compared with the scheme that handles the handshaking phase to adjust the transmission rate. Furthermore, this paper proposes a genetic algorithm that solves the problem of power combining, interference, data rate, and energy ensuring the signal to interference ratio in an ad hoc network. The result of the proposed genetic algorithm has a better performance (15%) compared to the CSMA-CDMA protocol without optimizing. Therefore, we show by simulation the effectiveness of the proposed protocol in terms of the throughput. PMID:25140339
-
MAC Protocol for Ad Hoc Networks Using a Genetic Algorithm
Directory of Open Access Journals (Sweden)
Omar Elizarraras
2014-01-01
Full Text Available The problem of obtaining the transmission rate in an ad hoc network consists in adjusting the power of each node to ensure the signal to interference ratio (SIR and the energy required to transmit from one node to another is obtained at the same time. Therefore, an optimal transmission rate for each node in a medium access control (MAC protocol based on CSMA-CDMA (carrier sense multiple access-code division multiple access for ad hoc networks can be obtained using evolutionary optimization. This work proposes a genetic algorithm for the transmission rate election considering a perfect power control, and our proposition achieves improvement of 10% compared with the scheme that handles the handshaking phase to adjust the transmission rate. Furthermore, this paper proposes a genetic algorithm that solves the problem of power combining, interference, data rate, and energy ensuring the signal to interference ratio in an ad hoc network. The result of the proposed genetic algorithm has a better performance (15% compared to the CSMA-CDMA protocol without optimizing. Therefore, we show by simulation the effectiveness of the proposed protocol in terms of the throughput.
-
Directory of Open Access Journals (Sweden)
I. Karabegović
2017-01-01
Full Text Available The term "INDUSTRY 4.0" or "fourth industrial revolution" was first introduced at the fair in 2011 in Hannover. It comes from the high-tech strategy of the German Federal Government that promotes automation-computerization to complete smart automation, meaning the introduction of a method of self-automation, self-configuration, self-diagnosing and fixing the problem, knowledge and intelligent decision-making. Any automation, including smart, cannot be imagined without industrial robots. Along with the fourth industrial revolution, ‘’robotic revolution’’ is taking place in Japan. Robotic revolution refers to the development and research of robotic technology with the aim of using robots in all production processes, and the use of robots in real life, to be of service to a man in daily life. Knowing these facts, an analysis was conducted of the representation of industrial robots in the production processes on the two continents of Europe and Asia /Australia, as well as research that industry is ready for the introduction of intelligent automation with the goal of establishing future smart factories. The paper gives a representation of the automation of production processes in Europe and Asia/Australia, with predictions for the future.
-
Anitua, Eduardo; Prado, Roberto; Troya, María; Zalduendo, Mar; de la Fuente, María; Pino, Ander; Muruzabal, Francisco; Orive, Gorka
2016-07-01
Plasma rich in growth factors (PRGF) is a biological therapy that uses patient's own growth factors for promoting tissue regeneration. Given the current European regulatory framework in which anticoagulant solution in blood extraction tubes could be considered as a medicinal product, a new PRGF protocol has been developed. The actual protocol (PRGF-A) and the new one (PRGF-B) have been performed and compared under Good Laboratory Practices. PRGF-A protocol uses extraction tubes with 0.9 mL of trisodium citrate as anticoagulant and 50 μL of calcium chloride/mL PRGF to activate it. The PRGF-B reduces the amount of sodium citrate and calcium chloride to 0.4 mL and to 20 μL, respectively. Basic hematological parameters, platelet function, the scaffold obtaining process, growth factors content, and the biological effect were compared between both PRGF obtaining protocols. PRGF-B protocol led to a statistically significant higher enrichment and recovery of platelets regarding to the PRGF-A. Hypotonic stress response by platelets was significantly better in the new protocol. A statistically significant decrease in the basal platelet activation status of PRGF-B compared to PRGF-A was also observed. The duration of the lag phase in the platelet aggregation assay was statistically lower for the PRGF-B protocol. Both the clotting and the clot retraction time were significantly reduced in the B protocol. A higher growth factor concentration was detected in the plasma obtained using the PRGF-B protocol. The new PRGF obtaining protocol, with a reduction in the amount of anticoagulant and activator, has even improved the actual one.
-
Efficacy of Low-Dose Protocol in Follow-Up of Lymphoproliferative Disorders - Preliminary Results
International Nuclear Information System (INIS)
Popic-Ramac, J.; Brnic, Z.; Klasic, B.; Hebrang, A.; Knezevic, Z.
2011-01-01
Most medically-related radiation is caused by diagnostic examinations, in particular by computed tomography (CT). The purpose of this research is to reduce radiation doses faced by the population frequently exposed to such procedures-those with lymphoproliferative disorders. The research was conducted comparing radiation-exposition doses received by the radiosensitive organs (thyroid, lens, breast and gonad) using the standard thoracic CT protocol with the radiation received using the low-dose protocol, while maintaining display quality. The standard-dose thoracic protocol implies 120 kV and 150 mAs. The low-dose protocol was conducted on the same device using 120 kV and 30 mAs. We confirmed the hypothesis that the use of the low-dose thoracic CT protocol leads to a reduction in radiation dose without compromising display quality. It is further expected that a reduction in doses will reduce the risk of radiation-related mutations. (author)
-
Using Ovsynch protocol versus Cosynch protocol in dairy cows
Directory of Open Access Journals (Sweden)
Ion Valeriu Caraba
2013-10-01
Full Text Available As a research on the reproductive physiology and endocrinology surrounding the estrous cycle in dairy cattle has been compiled, several estrous synchronization programs have been developed for use with dairy cows. These include several programs that facilitate the mass breeding of all animals at a predetermined time (timed-AI rather than the detection of estrus. We studied on 15 dary cows which were synchronized by Ovsynch and Cosynch programs. The estrus response for cows in Ovsynch protocol was of 63%. Pregnancy per insemination at 60 days was of 25%. Estrus response for cow in Cosynch protocol was of 57%. Pregnancy per insemination at 60 days was of 57%. Synchronization of ovulation using Ovsynch protocols can provide an effective way to manage reproduction in lactating dairy cows by eliminating the need for estrus detection. These are really efficient management programs for TAI of dairy cows that are able to reduce both the labour costs and the extra handling to daily estrus detection and AI.
-
Multi-Gateway-Based Energy Holes Avoidance Routing Protocol for WSN
Directory of Open Access Journals (Sweden)
Rohini Sharma
2016-04-01
Full Text Available In wireless sensor networks (WSNs, efficient energy conservation is required to prolong the lifetime of the network. In this work, we have given emphasis on balanced energy consumption and energy holes avoidance. This paper proposes a multi-gateway-based approach to reduce the transmission distance between the sender and the sink node. The area to be monitored is divided into regions and gateway nodes are deployed at optimal positions. We have designed a transmission scheme, in which sensors in the sink region communicate directly to the sink, sensors in the gateway region communicate directly to the gateway, and sensors in the cluster region transmit their data directly to their respective cluster head which transmits data to the gateway in its region. If the distance between a cluster head and the sink is less than the distance between the cluster head and the gateway node, the cluster head transmits data to the sink instead of the gateway node. We have compared the proposed protocol with Low-Energy Adaptive Clustering Hierarchy (LEACH, Gateway Based Energy Aware Multi-Hop Routing (M-GEAR, and Gateway Based Stable Election Protocol (GSEP protocols. The protocol performs better than other protocols in terms of throughput, stability period, lifetime, residual energy, and the packet transmitted to the sink.
-
Industry sponsorship and research outcome
DEFF Research Database (Denmark)
Lundh, Andreas; Lexchin, Joel; Mintzes, Barbara
2017-01-01
BACKGROUND: Clinical research affecting how doctors practice medicine is increasingly sponsored by companies that make drugs and medical devices. Previous systematic reviews have found that pharmaceutical-industry sponsored studies are more often favorable to the sponsor's product compared...... on the association between sponsorship and research outcome. OBJECTIVES: To investigate whether industry sponsored drug and device studies have more favorable outcomes and differ in risk of bias, compared with studies having other sources of sponsorship. SEARCH METHODS: In this update we searched MEDLINE (2010......, systematic reviews and meta-analyses that quantitatively compared primary research studies of drugs or medical devices sponsored by industry with studies with other sources of sponsorship. We had no language restrictions. DATA COLLECTION AND ANALYSIS: Two assessors screened abstracts and identified...
-
Initial Characterization of Optical Communications with Disruption-Tolerant Network Protocols
Schoolcraft, Joshua; Wilson, Keith
2011-01-01
Disruption-tolerant networks (DTNs) are groups of network assets connected with a suite of communication protocol technologies designed to mitigate the effects of link delay and disruption. Application of DTN protocols to diverse groups of network resources in multiple sub-networks results in an overlay network-of-networks with autonomous data routing capability. In space environments where delay or disruption is expected, performance of this type of architecture (such as an interplanetary internet) can increase with the inclusion of new communications mediums and techniques. Space-based optical communication links are therefore an excellent building block of space DTN architectures. When compared to traditional radio frequency (RF) communications, optical systems can provide extremely power-efficient and high bandwidth links bridging sub-networks. Because optical links are more susceptible to link disruption and experience the same light-speed delays as RF, optical-enabled DTN architectures can lessen potential drawbacks and maintain the benefits of autonomous optical communications over deep space distances. These environment-driven expectations - link delay and interruption, along with asymmetric data rates - are the purpose of the proof-of-concept experiment outlined herein. In recognizing the potential of these two technologies, we report an initial experiment and characterization of the performance of a DTN-enabled space optical link. The experiment design employs a point-to-point free-space optical link configured to have asymmetric bandwidth. This link connects two networked systems running a DTN protocol implementation designed and written at JPL for use on spacecraft, and further configured for higher bandwidth performance. Comparing baseline data transmission metrics with and without periodic optical link interruptions, the experiment confirmed the DTN protocols' ability to handle real-world unexpected link outages while maintaining capability of
-
Autonomous Power Control MAC Protocol for Mobile Ad Hoc Networks
Directory of Open Access Journals (Sweden)
2006-01-01
Full Text Available Battery energy limitation has become a performance bottleneck for mobile ad hoc networks. IEEE 802.11 has been adopted as the current standard MAC protocol for ad hoc networks. However, it was developed without considering energy efficiency. To solve this problem, many modifications on IEEE 802.11 to incorporate power control have been proposed in the literature. The main idea of these power control schemes is to use a maximum possible power level for transmitting RTS/CTS and the lowest acceptable power for sending DATA/ACK. However, these schemes may degrade network throughput and reduce the overall energy efficiency of the network. This paper proposes autonomous power control MAC protocol (APCMP, which allows mobile nodes dynamically adjusting power level for transmitting DATA/ACK according to the distances between the transmitter and its neighbors. In addition, the power level for transmitting RTS/CTS is also adjustable according to the power level for DATA/ACK packets. In this paper, the performance of APCMP protocol is evaluated by simulation and is compared with that of other protocols.
-
Amin, Ruhul; Islam, S K Hafizul; Biswas, G P; Khan, Muhammad Khurram; Obaidat, Mohammad S
2015-11-01
In order to access remote medical server, generally the patients utilize smart card to login to the server. It has been observed that most of the user (patient) authentication protocols suffer from smart card stolen attack that means the attacker can mount several common attacks after extracting smart card information. Recently, Lu et al.'s proposes a session key agreement protocol between the patient and remote medical server and claims that the same protocol is secure against relevant security attacks. However, this paper presents several security attacks on Lu et al.'s protocol such as identity trace attack, new smart card issue attack, patient impersonation attack and medical server impersonation attack. In order to fix the mentioned security pitfalls including smart card stolen attack, this paper proposes an efficient remote mutual authentication protocol using smart card. We have then simulated the proposed protocol using widely-accepted AVISPA simulation tool whose results make certain that the same protocol is secure against active and passive attacks including replay and man-in-the-middle attacks. Moreover, the rigorous security analysis proves that the proposed protocol provides strong security protection on the relevant security attacks including smart card stolen attack. We compare the proposed scheme with several related schemes in terms of computation cost and communication cost as well as security functionalities. It has been observed that the proposed scheme is comparatively better than related existing schemes.
-
Li, Chun-Ta; Weng, Chi-Yao; Lee, Cheng-Chi
2015-08-01
Radio Frequency Identification (RFID) based solutions are widely used for providing many healthcare applications include patient monitoring, object traceability, drug administration system and telecare medicine information system (TMIS) etc. In order to reduce malpractices and ensure patient privacy, in 2015, Srivastava et al. proposed a hash based RFID tag authentication protocol in TMIS. Their protocol uses lightweight hash operation and synchronized secret value shared between back-end server and tag, which is more secure and efficient than other related RFID authentication protocols. Unfortunately, in this paper, we demonstrate that Srivastava et al.'s tag authentication protocol has a serious security problem in that an adversary may use the stolen/lost reader to connect to the medical back-end server that store information associated with tagged objects and this privacy damage causing the adversary could reveal medical data obtained from stolen/lost readers in a malicious way. Therefore, we propose a secure and efficient RFID tag authentication protocol to overcome security flaws and improve the system efficiency. Compared with Srivastava et al.'s protocol, the proposed protocol not only inherits the advantages of Srivastava et al.'s authentication protocol for TMIS but also provides better security with high system efficiency.
-
International Nuclear Information System (INIS)
Hernandez Jimenez, Eduardo
2008-01-01
The geminivirus constitute an important group of plant pathogens, characterized by an unusual morphology of the viral particle and its DNA. They have a paired icosahedral cover and a small circular genome of DNA simple band that is replicated, by DNA double band, in the nucleus of the infected cell of the plant. Many researchers have focused on the development and optimization of protocols for obtaining DNA or RNA of interest, because of rapid advances in molecular biology during the second half of the XX century and the beginning of XXI century, and to that the extraction and purification of nucleic acids is the first step mainly of the procedures in this area. The objective is to compare, by means of molecular techniques, the DNA purification in squash from different ways of storage and extraction protocols of total nucleic acids of the plant, in order to improve the quality and amount of genetic matters whereupon the detection and characterization of geminivirus are realised. Three methods were compared: i. Dellaporta and collaborators (1983), ii.- Doyle and Doyle (1990) and iii.- Jose and Usha (2000). The operation of the three methods scaled downward (15 milligrams of leaf tissue) and two ways of storage were evaluated: 1.- tubes with silica gel (SG, a desiccant) and 2.- frozen to -70 degrees Celsius. The method of Jose and Usha (2000) presented technical difficulties that not permitted to scale downward, for which it should work with the purification from a gram of foliar tissue. The integrity of the total DNA was verified superior in the material stored to -70 degrees celsius for all the methods, by means of electrophoresis in gels of agarose, besides that the protocol of Dellaporta et al. (1983) tends to enrich the RNA. The readings were similar for the methods of Dellaporta et al. (1983) and Doyle and Doyle (1993), this was evidenced upon quantifying the total DNA and that is extracted at least a 30% more of DNA from material in the desiccant with respect
-
Energy Technology Data Exchange (ETDEWEB)
Takeuchi Waldegren, Linn
2006-03-15
The project based mechanisms of the Kyoto Protocol are innovative instruments which allow projects to earn credits for reducing greenhouse gas (GHG) emissions. The credits can in turn be used by countries to reach their emissions targets according to the Kyoto Protocol. The Project based mechanisms are known as the Clean Development Mechanism (CDM) and the Joint Implementation (JI). If the project based mechanisms are to be effective policy instruments they must ensure the integrity of the Kyoto Protocol, and their ability to promote and prove real emission reductions is critical. The environmental credibility of the project based mechanisms will also ensure their ability to promote cost effectiveness. Key concepts in this context are environmental and project additionality, and their role and value for the project based mechanisms are analyzed. Environmental additionality is established by comparing a project's emissions to a baseline. The baseline's credibility is thus vital. The concept of project additionality is somewhat controversial, but is nonetheless of equal importance. The case studies of CDM approved methodologies (AMs) and proposed projects suggest that there are credibility issues that need to be addressed if the project based mechanisms are to promote real emissions reductions.
-
Croatia energy planning and Kyoto Protocol
International Nuclear Information System (INIS)
Duic, Neven; Juretic, Franjo; Zeljko, Mladen; Bogdan, Z.
2005-01-01
Croatia as an Annex I country of the UN Framework Convention on Climate Change and a country that has pledged in the Annex B of the Kyoto Protocol to reduce its GHG emissions by 5% will have to envisage a new energy strategy. Compared to the energy consumption collapse in some transitional countries, Croatia has passed through a relatively short-term reduction of GHG emissions since 1990 because of higher energy efficiency of its pretransition economy. It is expected that in case of baseline scenario, it will breach the Kyoto target in 2003. Several scenarios of power generation are compared from the point of view of GHG emissions. The cost-effective scenario expects a mixture of coal and gas fired power plants to be built to satisfy the new demand and to replace the old power plants that are being decommissioned. More Kyoto friendly scenario envisages forcing the compliance with the Protocol with measures only in power generation sector by the construction of mainly zero emission generating capacity in the future, while decommissioning the old plants as planned, and is compared to the others from the GHG emissions point of view. The conclusion is that by measures tackling only power generation, it will not be possible to keep GHG emission under the Kyoto target level. The case of including the emissions from Croatian owned power plants in former Yugoslavia is also discussed
-
A family of multi-party authentication protocols
Cremers, C.J.F.; Mauw, S.
2006-01-01
We introduce a family of multi-party authentication protocols and discuss six novel protocols, which are members of this family. The first three generalize the well-known Needham-Schroeder-Lowe public-key protocol, the Needham-Schroeder private-key protocol, and the Bilateral Key Exchange protocol.
-
Nguyen, An Thi-Binh; Nigen, Michaël; Jimenez, Luciana; Ait-Abderrahim, Hassina; Marchesseau, Sylvie; Picart-Palmade, Laetitia
2018-01-15
Dextran or xanthan were used as model exocellular polysaccharides (EPS) to compare the extraction efficiency of EPS from skim milk acid gels using three different protocols. Extraction yields, residual protein concentrations and the macromolecular properties of extracted EPS were determined. For both model EPS, the highest extraction yield (∼80%) was obtained when samples were heated in acidic conditions at the first step of extraction (Protocol 1). Protocols that contained steps of acid/ethanol precipitation without heating (Protocols 2 and 3) show lower extraction yields (∼55%) but allow a better preservation of the EPS macromolecular properties. Changing the pH of acid gels up to 7 before extraction (Protocol 3) improved the extraction yield of anionic EPS without effect on the macromolecular properties of EPS. Protocol 1 was then applied for the quantification of EPS produced during the yogurt fermentation, while Protocol 3 was dedicated to their macromolecular characterization. Copyright © 2017 Elsevier Ltd. All rights reserved.
-
Industry and provinces fight global warming agreement: Canada still expected to ratify
International Nuclear Information System (INIS)
Marchildon, S.
2002-01-01
The Canadian government is under intense pressure from the provinces, industry and the United States not to ratify the Kyoto Agreement and to abandon its international commitment to reduce green house gas emissions. Opponents of the treaty claim that it will badly harm the economy, a misconception that is also at the root of the United States government's refusal to seriously address global warming. This belief rests on refusal to accept the scientific evidence. The Suzuki Foundation, and environmental groups in general claim that it is irresponsible for industry and certain provinces to continue to fight against Kyoto. With the documented findings of the world's top climate scientists, it is high time for Ottawa to stop listening to the special interests of the polluters and to stand up on behalf of all Canadians. To refute these ill-conceived claims of polluters a study which appeared in the October 2001 issue of 'Nature' is cited, according to which Italy could save about $2.9 billion annually by cutting greenhouse gas emissions. The study found that compliance with the Kyoto protocols would require 3.1 per cent more industrial spending, but reduce other costs by 35 per cent. Similar expert analysis show comparable savings and gains for other industrialized countries such as Canada and the United States. The principal means of achieving the Kyoto targets will be through reduction of fossil fuel energy consumption and general improvement in energy efficiency. These moves not only protect the climate, they also save money and create jobs. The Foundation is convinced that it is time to make the first step in the right direction, and Kyoto is that essential first step
-
Energy Technology Data Exchange (ETDEWEB)
Marin, Daniele [Duke University Medical Center, Department of Radiology, Durham, NC (United States); University of Rome Sapienza, Department of Radiological Sciences, Rome (Italy); Nelson, Rendon C. [Duke University Medical Center, Department of Radiology, Durham, NC (United States); Guerrisi, Antonino; Passariello, Roberto; Catalano, Carlo [University of Rome Sapienza, Department of Radiological Sciences, Rome (Italy); Barnhart, Huiman [Duke University Medical Center, Department of Biostatistics and Bioinformatics, Durham, NC (United States); Schindera, Sebastian T. [University Hospital of Bern, Institute for Diagnostic, Interventional and Pediatric Radiology, Bern (Switzerland)
2011-09-15
To prospectively investigate the effect of varying the injection flow rates of a saline chaser on vascular and parenchymal contrast enhancement during abdominal MDCT. 100 consecutive patients were randomly assigned to four injection protocols. A fixed dose of contrast medium was administered followed by no saline (Protocol A) or 50 mL of saline at 2, 4, or 8 mL/s (Protocols B, C, and D). Peak, time-to-peak, and duration of 90% peak enhancement were determined for aorta, pancreas, and liver. Aortic peak enhancement was significantly higher for Protocol D (369.5 HU) compared with Protocols A and B (332.9 HU and 326.0 HU, respectively; P < 0.05). Pancreatic peak enhancement was significantly higher for Protocols C and D (110.6 HU and 110.9 HU, respectively) compared to Protocol A (92.5 HU; P < 0.05). Aortic and pancreatic time-to-peak enhancement occurred significantly later for Protocol D compared with Protocol A (42.8 s vs. 36.1 s [P < 0.001] and 49.7 s vs. 45.3 s [P = 0.003]). Injecting a saline chaser at high flow rates yields significantly higher peak aortic and pancreatic enhancement, with a slight longer time-to-peak enhancement. (orig.)
-
Comparing Antonovsky's sense of coherence scale across three UK post-industrial cities.
Walsh, David; McCartney, Gerry; McCullough, Sarah; Buchanan, Duncan; Jones, Russell
2014-11-25
High levels of 'excess' mortality (ie, that seemingly not explained by deprivation) have been shown for Scotland compared to England and Wales and, especially, for its largest city, Glasgow, compared to the similarly deprived English cities of Liverpool and Manchester. It has been suggested that this excess may be related to differences in 'Sense of Coherence' (SoC) between the populations. The aim of this study was to ascertain whether levels of SoC differed between these cities and whether, therefore, this could be a plausible explanation for the 'excess'. Three post-industrial UK cities: Glasgow, Liverpool and Manchester. A representative sample of more than 3700 adults (over 1200 in each city). SoC was measured using Antonovsky's 13-item scale (SOC-13). Multivariate linear regression was used to compare SoC between the cities while controlling for characteristics (age, gender, SES etc) of the samples. Additional modelling explored whether differences in SoC moderated city differences in levels of self-assessed health (SAH). SoC was higher, not lower, among the Glasgow sample. Fully adjusted mean SoC scores for residents of Liverpool and Manchester were, respectively, 5.1 (-5.1 (95% CI -6.0 to -4.1)) and 8.1 (-8.1 (-9.1 to -7.2)) lower than those in Glasgow. The additional modelling confirmed the relationship between SoC and SAH: a 1 unit increase in SoC predicted approximately 3% lower likelihood of reporting bad/very bad health (OR=0.97 (95% CI 0.96 to 0.98)): given the slightly worse SAH in Glasgow, this resulted in slightly lower odds of reporting bad/very bad health for the Liverpool and Manchester samples compared to Glasgow. The reasons for the high levels of 'excess' mortality seen in Scotland and particularly Glasgow remain unclear. However, on the basis of these analyses, it appears unlikely that a low SoC provides any explanation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go
-
International Nuclear Information System (INIS)
Yang Yuguang; Wen Qiaoyan
2009-01-01
Following some ideas of the quantum secret sharing (QSS) protocol (2008, Phys. Lett. A 372, 1957), we propose an efficient quantum private comparison (QPC) protocol for comparing information of equality with the help of a third party (TP). The protocol can ensure fairness, efficiency and security. The protocol is fair, which means that one party knows the sound result of the comparison if and only if the other one knows the result. The protocol is efficient with the help of the TP for calculating. However, the TP cannot learn any information about the players' respective private inputs and even about the comparison result and cannot collude with any player. The protocol is secure for the two players, that is, any information about their respective secret inputs will not leak except the final computation result. A precise proof of security of the protocol is presented. Applications of this protocol may include private bidding and auctions, secret ballot elections, commercial business, identification in a number of scenarios and so on
-
United States electric industry : restructuring in review
International Nuclear Information System (INIS)
Slocum Hollis, S.
2004-01-01
This paper provides a detailed review of the United States electric power industry. The aim of the review was to clarify and better define current industry procedures and practices in light of significant and recent restructuring. In addition, recent bankruptcies and the power blackout in 2003 have raised concerns over industry practices. Issues concerning Independent System Operators (ISO) and regional transmission organizations were evaluated, with reference to an evolution and implementation of Regional Transmission Organization (RTO) policy, including a cost-benefit analysis. A background of RTO formations was provided with reference to consolidation, selection process and transfer of assets. Standard market design, network access and pricing issues were reviewed, as well as market and reliability concerns. Issues concerning affiliate treatment, shortages and the effect of sale of securities were presented. Various approaches to congestion management were examined, with examples from California and New England. Market monitoring issues, investigations and hearings were also examined, with examples and orders, including details of refunds. Measures to improve reliability were reviewed, including: management systems, benefit margins, requirements, assurance agreements and reserve markets. Issues concerning information access were presented, including: Open Access Same-time Information System (OASIS) requirements; tagging; standard business practices and protocols; and quarterly report practices and protocols. Interconnection policies were reviewed with reference to applicability, service options and pricing. The issue of variations was examined, with case examples concerning cost allocation, contract rights and treatment of specific costs. Jurisdiction issues concerning corporate realignments and power exchanges were presented, as well as specific services and state-federal relations. Issues concerning mergers and merger policy were also discussed, with reference
-
Protocol renal biopsy in patients with lupus nephritis: a single center experience.
Singh, Ametashver; Ghosh, Rabindranath; Kaur, Prabhjeet; Golay, Vishal; Pandey, Rajendra; Roychowdhury, Arpita
2014-07-01
Renal biopsy plays an indispensable role in the diagnosis and management of patients with lupus nephritis (LN). A number of studies have evaluated the role of a repeat biopsy in case of disease relapse or treatment unresponsiveness. We studied 40 patients with LN with renal biopsies performed at baseline and after six months of therapy. The baseline and protocol biopsies were compared with respect to histological class transformation, crescents, tubular atrophy, interstitial fibrosis and glomerulosclerosis. We also compared serum creatinine, hemoglobin, systemic lupus erythematosus disease activity index (SLEDAI) scores, 24-h urine protein excretion and C3levels as well as activity index (AI) and chronicity index (CI) at baseline and at six months. Comparison of means was made by paired t test, McNemar test and marginal homogeneity test (multinomial data). Histological class transformation was seen in 10 patients (25%). Intra-class progression to greater chronicity was seen in 10 other patients (25%).There was an increase in glomerulosclerosis, tubular atrophy, interstitial fibrosis and a reduction in cellularity, crescent formation and wire loop lesions in the protocol biopsy. A decline in AI (6.05 vs. 2.50, P protocol biopsy. Our study shows a trend toward greater chronicity in protocol biopsies in LN.
-
Directory of Open Access Journals (Sweden)
Ammar Babiker
2017-10-01
Full Text Available Energy efficiency has been considered as the most important issue in wireless sensor networks. As in many applications, wireless sensors are scattered in a wide harsh area, where the battery replacement or charging will be quite difficult and it is the most important challenge. Therefore, the design of energy saving mechanism becomes mandatory in most recent research. In this paper, a new energy efficient clustered routing protocol is proposed: the proposed protocol is based on analyzing the data collected from the sensors in a base-station. Based on this analysis the cluster head will be selected as the one with the most useful data. Then, a variable time slot is specified to each sensor to minimize the transmission of repetitive and un-useful data. The proposed protocol Data-Based Energy Efficient Clustered Routing Protocol for Wireless Sensors Networks (DCRP was compared with the famous energy efficient LEACH protocol and also with one of the recent energy efficient routing protocols named Position Responsive Routing Protocol (PRRP. DCRP has been used in monitoring the floods in Tabuk area –Saudi Arabia. It shows comparatively better results.
-
Energy Technology Data Exchange (ETDEWEB)
Lopez-Rendon, Xochitl; Develter, Wim [KU Leuven, Department of Imaging and Pathology, Division of Medical Physics and Quality Assessment, Leuven (Belgium); Zhang, Guozhi; Coudyzer, Walter; Zanca, Federica [University Hospitals of the KU Leuven, Department of Radiology, Leuven (Belgium); Bosmans, Hilde [KU Leuven, Department of Imaging and Pathology, Division of Medical Physics and Quality Assessment, Leuven (Belgium); University Hospitals of the KU Leuven, Department of Radiology, Leuven (Belgium)
2017-11-15
To compare the lung and breast dose associated with three chest protocols: standard, organ-based tube current modulation (OBTCM) and fast-speed scanning; and to estimate the error associated with organ dose when modelling the longitudinal (z-) TCM versus the 3D-TCM in Monte Carlo simulations (MC) for these three protocols. Five adult and three paediatric cadavers with different BMI were scanned. The CTDI{sub vol} of the OBTCM and the fast-speed protocols were matched to the patient-specific CTDI{sub vol} of the standard protocol. Lung and breast doses were estimated using MC with both z- and 3D-TCM simulated and compared between protocols. The fast-speed scanning protocol delivered the highest doses. A slight reduction for breast dose (up to 5.1%) was observed for two of the three female cadavers with the OBTCM in comparison to the standard. For both adult and paediatric, the implementation of the z-TCM data only for organ dose estimation resulted in 10.0% accuracy for the standard and fast-speed protocols, while relative dose differences were up to 15.3% for the OBTCM protocol. At identical CTDI{sub vol} values, the standard protocol delivered the lowest overall doses. Only for the OBTCM protocol is the 3D-TCM needed if an accurate (<10.0%) organ dosimetry is desired. (orig.)
-
TH-C-18A-08: A Management Tool for CT Dose Monitoring, Analysis, and Protocol Review
International Nuclear Information System (INIS)
Wang, J; Chan, F; Newman, B; Larson, D; Leung, A; Fleischmann, D; Molvin, L; Marsh, D; Zorich, C; Phillips, L
2014-01-01
Purpose: To develop a customizable tool for enterprise-wide managing of CT protocols and analyzing radiation dose information of CT exams for a variety of quality control applications Methods: All clinical CT protocols implemented on the 11 CT scanners at our institution were extracted in digital format. The original protocols had been preset by our CT management team. A commercial CT dose tracking software (DoseWatch,GE healthcare,WI) was used to collect exam information (exam date, patient age etc.), scanning parameters, and radiation doses for all CT exams. We developed a Matlab-based program (MathWorks,MA) with graphic user interface which allows to analyze the scanning protocols with the actual dose estimates, and compare the data to national (ACR,AAPM) and internal reference values for CT quality control. Results: The CT protocol review portion of our tool allows the user to look up the scanning and image reconstruction parameters of any protocol on any of the installed CT systems among about 120 protocols per scanner. In the dose analysis tool, dose information of all CT exams (from 05/2013 to 02/2014) was stratified on a protocol level, and within a protocol down to series level, i.e. each individual exposure event. This allows numerical and graphical review of dose information of any combination of scanner models, protocols and series. The key functions of the tool include: statistics of CTDI, DLP and SSDE, dose monitoring using user-set CTDI/DLP/SSDE thresholds, look-up of any CT exam dose data, and CT protocol review. Conclusion: our inhouse CT management tool provides radiologists, technologists and administration a first-hand near real-time enterprise-wide knowledge on CT dose levels of different exam types. Medical physicists use this tool to manage CT protocols, compare and optimize dose levels across different scanner models. It provides technologists feedback on CT scanning operation, and knowledge on important dose baselines and thresholds
-
National protocol framework for the inventory and monitoring of bees
Droege, Sam; Engler, Joseph D.; Sellers, Elizabeth A.; Lee O'Brien,
2016-01-01
This national protocol framework is a standardized tool for the inventory and monitoring of the approximately 4,200 species of native and non-native bee species that may be found within the National Wildlife Refuge System (NWRS) administered by the U.S. Fish and Wildlife Service (USFWS). However, this protocol framework may also be used by other organizations and individuals to monitor bees in any given habitat or location. Our goal is to provide USFWS stations within the NWRS (NWRS stations are land units managed by the USFWS such as national wildlife refuges, national fish hatcheries, wetland management districts, conservation areas, leased lands, etc.) with techniques for developing an initial baseline inventory of what bee species are present on their lands and to provide an inexpensive, simple technique for monitoring bees continuously and for monitoring and evaluating long-term population trends and management impacts. The latter long-term monitoring technique requires a minimal time burden for the individual station, yet can provide a good statistical sample of changing populations that can be investigated at the station, regional, and national levels within the USFWS’ jurisdiction, and compared to other sites within the United States and Canada. This protocol framework was developed in cooperation with the United States Geological Survey (USGS), the USFWS, and a worldwide network of bee researchers who have investigated the techniques and methods for capturing bees and tracking population changes. The protocol framework evolved from field and lab-based investigations at the USGS Bee Inventory and Monitoring Laboratory at the Patuxent Wildlife Research Center in Beltsville, Maryland starting in 2002 and was refined by a large number of USFWS, academic, and state groups. It includes a Protocol Introduction and a set of 8 Standard Operating Procedures or SOPs and adheres to national standards of protocol content and organization. The Protocol Narrative