WorldWideScience

Sample records for industrialized housing systems

  1. Energy Supply System for Industrial Poultry Houses

    Directory of Open Access Journals (Sweden)

    Sit M.L.

    2016-04-01

    Full Text Available The gas engine driven carbon dioxide heat pump designed for providing the heat, cold and electricity for industrial poultry house is proposed. The scheme differs from the known by using recuperative heat exchanger installed between the exhaust air duct of poultry house and heat pump evaporator and the heat curtain installed on the air duct after the evaporator. The air coming into the poultry house after the regenerative heat exchanger is supplied to the heat pump gas cooler. The heat pump produces heat of the required parameters of the input air and water for watering of poultry, space heating, etc. Heat pump compressor is driven by gas engine (GPA, by natural gas or biogas. The part of the gas-piston engine heat is used for adjusting the optimal heat pump mode and for regeneration of the absorbent in an evaporative cooler. The proposed technical solution of the above scheme provides a higher COP of the heat pump. Installing of heat curtain does not require the use of non-freezing solution to prevent icing of the air outlet of heat pump evaporator. The latter allows producing, besides electric power and heat, still cold (with the use off the adsorption-refrigerating machine and provide drying air inlet evaporative cooler (if necessary.

  2. Study and application of the balloon frame system to the industrialization of housing: the case of the American System-Built Houses of Frank Lloyd Wright

    Directory of Open Access Journals (Sweden)

    B. Serra Soriano

    2017-06-01

    Full Text Available Within his large architectural production, Frank Lloyd Wright had the opportunity to experiment with the timber industrialization, linking a traditional material with the modern sense of architecture. Wood and Frank Lloyd Wright are inseparable from the balloon frame system, a system which he will use at his first housing and through which he will materialize the spatial decomposition concept. The research on the particular American System-Built Houses case will serve to show the earliest experiences of Wright with the industry, whose conclusions he would use for subsequent researches on prefabrication.

  3. Energy efficient industrialized housing research program

    Energy Technology Data Exchange (ETDEWEB)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-12-01

    This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

  4. Energy efficient industrialized housing research program

    Energy Technology Data Exchange (ETDEWEB)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; Mc Donald, M.; McGinn, B.; Ryan, P.; Sekiguchi, T. (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Maxwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-01-01

    This is the second volume of a two volume report on energy efficient industrialized housing. Volume II contains support documentation for Volume I. The following items are included: individual trip reports; software bibliography; industry contacts in the US, Denmark, and Japan; Cost comparison of industrialized housing in the US and Denmark; draft of the final report on the systems analysis for Fleetwood Mobile Home Manufacturers. (SM)

  5. Building America Industrialized Housing Partnership (BAIHP II)

    Energy Technology Data Exchange (ETDEWEB)

    Abernethy, Bob; Chandra, Subrato; Baden, Steven; Cummings, Jim; Cummings, Jamie; Beal, David; Chasar, David; Colon, Carlos; Dutton, Wanda; Fairey, Philip; Fonorow, Ken; Gil, Camilo; Gordon, Andrew; Hoak, David; Kerr, Ryan; Peeks, Brady; Kosar, Douglas; Hewes, Tom; Kalaghchy, Safvat; Lubliner, Mike; Martin, Eric; McIlvaine, Janet; Moyer, Neil; Liguori, Sabrina; Parker, Danny; Sherwin, John; Stroer, Dennis; Thomas-Rees, Stephanie; Daniel, Danielle; McIlvaine, Janet

    2010-11-30

    This report summarizes the work conducted by the Building America Industrialized Housing Partnership (BAIHP - www.baihp.org) during the final budget period (BP5) of our contract, January 1, 2010 to November 30, 2010. Highlights from the four previous budget periods are included for context. BAIHP is led by the Florida Solar Energy Center (FSEC) of the University of Central Florida. With over 50 Industry Partners including factory and site builders, work in BP5 was performed in six tasks areas: Building America System Research Management, Documentation and Technical Support; System Performance Evaluations; Prototype House Evaluations; Initial Community Scale Evaluations; Project Closeout, Final Review of BA Communities; and Other Research Activities.

  6. ERP System Evaluation on SOFI XP Based Accounting Module in Software House Industry

    Directory of Open Access Journals (Sweden)

    Shinta Mardallena

    2015-09-01

    Full Text Available Accounting module is an important module for a company business process. The roles are in the form of parameter calculation of profits, losses and financial performance based on transaction, which basically is a real-time reporting system. The amount of company needs on accounting indicates that the accounting is one of the resources which support the establishment of a company. Thus, the company constantly improves the accounting performance, especially in handling of receivables, debts, and cash transactions. Evaluations which were performed at SOFI XP-based ERP system aims to provide a solution to a problem that was discovered during the analysis of the system needs. This evaluation was done in two stages: by collecting data and analyzing the system that running in the company. By doing this evaluation, the documentation of system performance and the solution for problems that were found in the company can be generated.

  7. Building America Industrialized Housing Partnership (BAIHP)

    Energy Technology Data Exchange (ETDEWEB)

    McIlvaine, Janet; Chandra, Subrato; Barkaszi, Stephen; Beal, David; Chasar, David; Colon, Carlos; Fonorow, Ken; Gordon, Andrew; Hoak, David; Hutchinson, Stephanie; Lubliner, Mike; Martin, Eric; McCluney, Ross; McGinley, Mark; McSorley, Mike; Moyer, Neil; Mullens, Mike; Parker, Danny; Sherwin, John; Vieira, Rob; Wichers, Susan

    2006-06-30

    This final report summarizes the work conducted by the Building America Industrialized Housing Partnership (www.baihp.org) for the period 9/1/99-6/30/06. BAIHP is led by the Florida Solar Energy Center of the University of Central Florida and focuses on factory built housing. In partnership with over 50 factory and site builders, work was performed in two main areas--research and technical assistance. In the research area--through site visits in over 75 problem homes, we discovered the prime causes of moisture problems in some manufactured homes and our industry partners adopted our solutions to nearly eliminate this vexing problem. Through testing conducted in over two dozen housing factories of six factory builders we documented the value of leak free duct design and construction which was embraced by our industry partners and implemented in all the thousands of homes they built. Through laboratory test facilities and measurements in real homes we documented the merits of 'cool roof' technologies and developed an innovative night sky radiative cooling concept currently being tested. We patented an energy efficient condenser fan design, documented energy efficient home retrofit strategies after hurricane damage, developed improved specifications for federal procurement for future temporary housing, compared the Building America benchmark to HERS Index and IECC 2006, developed a toolkit for improving the accuracy and speed of benchmark calculations, monitored the field performance of over a dozen prototype homes and initiated research on the effectiveness of occupancy feedback in reducing household energy use. In the technical assistance area we provided systems engineering analysis, conducted training, testing and commissioning that have resulted in over 128,000 factory built and over 5,000 site built homes which are saving their owners over $17,000,000 annually in energy bills. These include homes built by Palm Harbor Homes, Fleetwood, Southern Energy

  8. Factors and Drivers Effecting the Decision of Using Off-Site Manufacturing (OSM Systems in House Building Industry

    Directory of Open Access Journals (Sweden)

    Hussein Elnaas

    2014-01-01

    Full Text Available Much has been written on Off-site Manufacturing (OSM in construction, particularly regarding the perceived benefits and barriers to implementation. However, there seems to be a wide misunderstanding of the state of OSM associated with the concept of decision by many of those involved in decision making process within the house building industry. This has led to a demand for guidance’s on decision making process for construction project leaders particularly at early project stages. Choosing a construction method for a project will require an optimum decision strategy which involves careful understanding, measurement and evaluation of a number of decision factors that can have the most influence on successful decision action. This paper, therefore, aims to identify the key decision factors to be considered at evaluation stage when choosing to use Off-Site Manufacturing (OSM as a construction strategy in house building projects. This will reveal the key drivers for change in the industry towards the use of OSM in house building.

  9. Housing Affordability Data System (HADS)

    Data.gov (United States)

    Department of Housing and Urban Development — The Housing Affordability Data System (HADS) is a set of files derived from the 1985 and later national American Housing Survey (AHS) and the 2002 and later Metro...

  10. Microclimate measuring and fluid‑dynamic simulation in an industrial broiler house: testing of an experimental ventilation system.

    Science.gov (United States)

    Bianchi, Biagio; Giametta, Ferruccio; La Fianza, Giovanna; Gentile, Andrea; Catalano, Pasquale

    2015-01-01

    The environment in the broiler house is a combination of physical and biological factors generating a complex dynamic system of interactions between birds, husbandry system, light, temperature, and the aerial environment. Ventilation plays a key role in this scenario. It is pivotal to remove carbon dioxide and water vapor from the air of the hen house. Adequate ventilation rates provide the most effective method of controlling temperature within the hen house. They allow for controlling the relative humidity and can play a key role in alleviating the negative effects of high stocking density and of wet litter. In the present study the results of experimental tests performed in a breeding broiler farm are shown. In particular the efficiency of a semi transversal ventilation system was studied against the use of a pure transversal one. In order to verify the efficiency of the systems, fluid dynamic simulations were carried out using the software Comsol multiphysics. The results of this study show that a correct architectural and structural design of the building must be supported by a design of the ventilation system able to maintain the environmental parameters within the limits of the thermo‑neutral and welfare conditions and to achieve the highest levels of productivity.

  11. PENGEMBANGAN KONSEP SISTEM JAMINAN HALAL DI RUMAH POTONG AYAM (Studi Kasus pada Industri Daging Ayam [Concept Development Of Halal Assurance System In The Chicken Slaughter House (Case Study Of Chicken Meat Industry

    Directory of Open Access Journals (Sweden)

    Wiwit Estuti1

    2005-12-01

    Full Text Available The application of effective halal assurance system model was one of producer's effort to supply halal food for Moslem consumers. The objective Of this research was to develop halal assurance system concept which is consist of halal manual. Halal Standard Operating Procedure, Guideline, and Work Instruction which should be applied at Chicken Slaughter House. flied research used descriptive method by distributing questionnaire, direct observation, on-site verification and halal assurance system assessment on two Chicken Slaughter House. The halal assurance system assessment was conducted based on ISO 9000, 2000 guideline of arrangement of HACCP system. The conclusion of this research was that this Halal Assurance System was suitable to be used as a standard for Chicken Slaughter House. The document change on both industry was that of applied halal assurance system. It was found that there were two kinds of haram Critical Control Point, which were two points at raw material and four point at chicken production process

  12. Industry wins, loses in House bill

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that the House of Representatives has approved a plan to limit U.S. gas prorationing by the states but rejected a move to require petroleum refiners and importers to place 1% of their oil or products volumes into the Strategic Petroleum Reserve. The oil industry lobbied heavily against the SPR provision, which went down 263-135. The House then passed its omnibus energy bill 381-37. It is designed to facilitate all types of energy production while promoting conservation. The legislation also imposes bans on offshore leasing but gives independent producers limited relief from the alternative minimum tax (AMT) and does not include a mandate for use of ethanol in gasoline

  13. Industrialized Information Systems Development

    DEFF Research Database (Denmark)

    Havn, Erling; Bansler, Jørgen P.

    1996-01-01

    The production of application software is rapidly being industrialized. Computer manufacturers and software houses produce a rapidly growing number of generic software applications and systems, and more and more user companies choose to build their computer-based information systems...... with such generic products, instead of custom made software. We discuss how the move away from traditional in-house development and the increasing use of generic software is likely to transform IS development in the near future. We conclude that these developments will make new demands on the information systems...

  14. Energy Efficient Industrialized Housing Research Program, Center for Housing Innovation, University of Oregon and the Florida Solar Energy Center

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G.Z.

    1990-01-01

    This research program addresses the need to increase the energy efficiency of industrialized housing. Two research centers have responsibility for the program: the Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. The two organizations provide complementary architectural, systems engineering, and industrial engineering capabilities. In 1989 we worked on these tasks: (1) the formation of a steering committee, (2) the development of a multiyear research plan, (3) analysis of the US industrialized housing industry, (4) assessment of foreign technology, (5) assessment of industrial applications, (6) analysis of computerized design and evaluation tools, and (7) assessment of energy performance of baseline and advanced industrialized housing concepts. The current research program, under the guidance of a steering committee composed of industry and government representatives, focuses on three interdependent concerns -- (1) energy, (2) industrial process, and (3) housing design. Building homes in a factory offers the opportunity to increase energy efficiency through the use of new materials and processes, and to increase the value of these homes by improving the quality of their construction. Housing design strives to ensure that these technically advanced homes are marketable and will meet the needs of the people who will live in them.

  15. Comparative Study of the Housing Industry Performance in country ‎

    Directory of Open Access Journals (Sweden)

    Hamid Sepehrdoust

    2011-03-01

    Full Text Available The aim of this study is to measure the technical efficiency of housing construction in Iran and also to define current status of the housing industry system and its future in the country. Data Envelopment Analysis (DEA and the input based model of CCR with fixed return to scale have been used to evaluate housing industry performance in different states of Iran during the years 2006-2009. The complementary BCC approach with assumption of variable return to scale has been used for dividing technical efficiency to management and scale efficiencies. The findings imply that the average efficiency score obtained by all the states is 0.94 and only 37 percent of the states operate technically efficient. On the other hand, about 63 percent of the states are found as relatively inefficient and mostly present decreasing return to scale. Also, it has been found that the inefficient states have management inefficiency in utilizing construction inputs. Without any doubt, managerial and supportive assistance of the government to inefficient states, motivating construction employees to proper jobs and knowledge development in optimum assignment of construction factors could be appropriate solutions for the problems of the housing sector.

  16. Housing and the wood industry, trends & market conditions

    Science.gov (United States)

    Urs Buehlmann; Matt Bumgardner; Al Schuler; K. Koenig

    2011-01-01

    Housing markets continue to have major impacts on the secondary wood industry. So, what are the steps being taken by wood products manufacturers in order to stay viable? As a follow-up to last year's article, "Housing Market's Impact on the Secondary Woodworking Industry" (Wood & Wood Products, July 2010), the focus of this year's study was...

  17. Smart House Interconnected System Architecture

    Directory of Open Access Journals (Sweden)

    ALBU Răzvan-Daniel

    2017-05-01

    Full Text Available In this research work we will present the architecture of an intelligent house system capable to detect accidents cause by floods, gas, and to protect against unauthorized access or burglary. Our system is not just an alarm, it continuously monitors the house and reports over internet its state. Most of the current smart house systems available on the market alarms the user via email or SMS when an unwanted event happens. Thus, the user assumes that the house is not affected if an alarm message is not received. This is not always true, since the monitoring system components can also damage, or the entire system can become unable to send an alarm message even if it detects an unwanted event. This article presents also details about both hardware and software implementation.

  18. Power System for Intelligent House

    Directory of Open Access Journals (Sweden)

    Michal Jahelka

    2010-01-01

    Full Text Available Power supply of intelligent houses or house phones is possible to do with standard transformer with voltage stabilizer or with intelligent power supply. Standard solution can has as a result of failure fuse blown or fire occurrence. Intelligent power supply switch off power and tests with little current whether short circuit is removed. After it resume system power supply. At the same time it cares of system backup with accumulator, informs control system about short circuit or failure net power supply, or can switch off all system power after command from control system.

  19. Design for energy efficiency: Energy efficient industrialized housing research program. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Kellett, R.; Berg, R.; Paz, A.; Brown, G.Z.

    1991-03-01

    Since 1989, the U.S. Department of Energy has sponsored the Energy Efficient Industrialized Housing research program (EEIH) to improve the energy efficiency of industrialized housing. Two research centers share responsibility for this program: The Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. Additional funding is provided through the participation of private industry, state governments and utilities. The program is guided by a steering committee comprised of industry and government representatives. This report summarizes Fiscal Year (FY) 1990 activities and progress, and proposed activities for FY 1991 in Task 2.1 Design for Energy Efficiency. This task establishes a vision of energy conservation opportunities in critical regions, market segments, climate zones and manufacturing strategies significant to industrialized housing in the 21st Century. In early FY 1990, four problem statements were developed to define future housing demand scenarios inclusive of issues of energy efficiency, housing design and manufacturing. Literature surveys were completed to assess seven areas of influence for industrialized housing and energy conservation in the future. Fifty-five future trends were identified in computing and design process; manufacturing process; construction materials, components and systems; energy and environment; demographic context; economic context; and planning policy and regulatory context.

  20. Gas House Autonomous System Monitoring

    Science.gov (United States)

    Miller, Luke; Edsall, Ashley

    2015-01-01

    Gas House Autonomous System Monitoring (GHASM) will employ Integrated System Health Monitoring (ISHM) of cryogenic fluids in the High Pressure Gas Facility at Stennis Space Center. The preliminary focus of development incorporates the passive monitoring and eventual commanding of the Nitrogen System. ISHM offers generic system awareness, adept at using concepts rather than specific error cases. As an enabler for autonomy, ISHM provides capabilities inclusive of anomaly detection, diagnosis, and abnormality prediction. Advancing ISHM and Autonomous Operation functional capabilities enhances quality of data, optimizes safety, improves cost effectiveness, and has direct benefits to a wide spectrum of aerospace applications.

  1. Energy efficient residential house wall system

    International Nuclear Information System (INIS)

    Aldawi, Fayez; Date, Abhijit; Alam, Firoz; Khan, Iftekhar; Alghamdi, Mohammed

    2013-01-01

    The energy consumption and greenhouse gas emission by the residential housing sector are considered to be one of the largest in economically developed countries. The larger energy consumption and greenhouse gas emission not only put additional pressure on finite fossil fuel resources but also cause global warming and climate change. Additionally, the residential housing sector will be consuming more energy as the house demand and average house floor area are progressively increasing. With currently used residential house wall systems, it is hard to reduce energy consumption for ongoing house space heating and cooling. A smart house wall envelope with optimal thermal masses and insulation materials is vital for reducing our increasing energy consumption. The major aim of this study is to investigate thermal performance and energy saving potential of a new house wall system for variable climate conditions. The thermal performance modelling was carried out using commercially developed software AccuRate ® . The findings indicate that a notable energy savings can be accomplished if a smart house wall system is used. -- Highlights: • Smart house wall system. • Thermal performance modelling and star energy rating. • Energy savings and greenhouse gas reduction

  2. EL PROGRAMA CASE STUDY HOUSE: INDUSTRIA, PROPAGANDA Y VIVIENDA / Case Study House Program: industry, propaganda and housing

    Directory of Open Access Journals (Sweden)

    Daniel Díez Martínez

    2012-05-01

    Full Text Available RESUMEN En enero de 1945, John Entenza, editor de la revista californiana Arts & Architecture, puso en marcha el programa Case Study House, un ambicioso proyecto cuyo firme objetivo era investigar las posibilidades y soluciones del problema de la vivienda al que se enfrentaba los Estados Unidos de la posguerra. Para ello, Entenza diseñó una novedosa estrategia de colaboración entre algunos de los mejores arquitectos californianos del momento y la maquinaria industrial estadounidense, abierta a un proceso de reconversión de producción bélica a objetos para la población civil que tendría lugar en un tiempo récord. Así, el artículo propone el análisis de esa relación entre empresa y domesticidad, entre viabilidad económica y calidad arquitectónica, entre procesos de prefabricación y espíritu individual. Todos ellos conceptos aparentemente opuestos pero que, de la mano del programa Case Study House, lograron un entendimiento que a día de hoy sigue resultando extraordinario. SUMMARY In January 1945, John Entenza, editor of the California Arts & Architecture magazine, launched the ‘Case Study House Program’, an ambitious project whose firm objective was to investigate the possibilities and solutions for the housing problem facing the United States after the war. To do this, Entenza designed a novel strategy for collaboration between some of the best Californian architects of the time and the U.S. industrial machine, open to a process of conversion from military production to objects for the civilian population that would take place in record time. Thus, the article proposes the analysis of the relationship between business and domesticity, between economic viability and architectural quality, between prefabrication processes and individual spirit. All of these seemingly opposing concepts reached, at the hands of the ‘Case Study House Program’, an understanding that still seems extraordinary today.

  3. The Butterfly House Industry: Conservation Risks and Education Opportunities

    Directory of Open Access Journals (Sweden)

    Michael Boppré

    2012-01-01

    Full Text Available This paper addresses the mass supply and use of butterflies for live exhibits, discusses the risks to biodiversity which this creates, and the educational opportunities it presents. Over the past 30 years a new type of insect zoo has become popular worldwide: the butterfly house. This has given rise to the global Butterfly House Industry (BHI based on the mass production of butterfly pupae as a cash crop. Production is largely carried out by privately-owned butterfly farms in tropical countries, notably Central America and Southeast Asia. Most pupae are exported to North America and Europe, although the number of butterfly houses in tropical countries is growing. The BHI is described with respect to its stakeholders, their diverse interests, and its extent. It is estimated that the global turnover of the BHI is in the order of USD 100 million. From a conservation perspective, there is a tension between risks and benefits. The risks to biodiversity are primarily unsustainable production, potential bastardisation of local faunas and floras, and genetic mixing within and even between butterfly species. This paper discusses general ways of managing these risks. Ethical concerns range from fair trade issues to animal husbandry and the use of wildlife for entertainment. For the risks to biodiversity and unresolved ethical issues to be tolerable, the BHI needs to make a significant contribution to conservation, primarily through effective education about butterfly biology as a means to raise public awareness of basic ecological processes, and conservation and environmental issues. It should also engage with local conservation initiatives. Currently the BHI′s great potential for public good in these respects is rarely realised. The paper concludes by looking at the special nature of the BHI, and its need for effective self-regulation if it is to continue to escape from public scrutiny and the introduction of restrictive regulations. The BHI needs to

  4. Advanced house air-barrier systems

    Energy Technology Data Exchange (ETDEWEB)

    Lee, R.K. [Natural Resources Canada, Ottawa, ON (Canada)

    1996-08-01

    Air barrier systems used in modern Canadian airtight homes were discussed. The Advanced Houses Program sets its airtightness requirements at 1.5 air changes per hour at 50 Pascals pressure difference (ACH{sub 5}0). In recent tests of 10 houses, it was suggested that a better airtightness level was attainable with average airtightness of about 1.0 ACH{sub 5}0. Six of the homes tested did not use the traditional polyethylene approach. Two of the houses used the airtight drywall approach, one used a foam system, and three used exterior air barriers. The advantages and disadvantages of each system was described, including cost effectiveness, cost reduction, performance and installation advantages. The confusion between an air barrier and a vapour diffusion retarder was explained. Exterior air barriers showed the greatest potential for meeting airtightness requirements at reasonable cost. 5 refs., 3 tabs.

  5. Usability evaluation of in-housed developed ERP system

    Science.gov (United States)

    Faisal, Chaudhry Muhammad Nadeem; Shakeel Faridi, Muhammad; Javed, Zahid

    2011-10-01

    Enterprise Resource Planning systems are the combination of different business IS (Information System) applications that are designed according to the organization requirements. Generally ERP systems are suffering from complex user interface issues. Recent research shows that there is a need for improvement concerning, the user interface from their perspectives. In order to design the software applications that are easy to use, memorize and apply to new problems, we must know the users philosophy and something about learning, reminiscence and problems solving. The Usability engineering is the only way to study the deeds of users while interacting with ERP (Enterprise Resource & Planning). This paper will focus on the users' experiences view of financial module in ERP system. The HCI research method, explicitly survey questionnaire method was adopted to gather users understanding in order to evaluate the selected modules for in-housed ERP system. The study involved group of users from two industries, the results can not be generalized as a whole. The study was first time successfully applied Usability evaluation on in-housed ERP in local industry (Masood Textile Mills, Interloop Ltd) in Pakistan. The results may hopefully opened-up an area of research and methodology that could provide considerable further benefits to Industry in developments of Industrial information systems.

  6. Housing Systems and Ethnic Spatial Segregation

    DEFF Research Database (Denmark)

    Andersen, Hans Skifter; Andersson, Roger; Wessel, Terje

    Residential spatial segregation is related to housing markets and housing policies. In this paper, ethnic segregation is compared across four Nordic capitals and explanations for the differences are examined by comparing the housing markets and housing policies of the countries. The housing markets...

  7. Micro-CHP for self-supply in the housing industry. Profitability and system integration; Mikro-BHKW zur Eigenversorgung in der Wohnungswirtschaft. Wirtschaftlichkeit und Systemintegration

    Energy Technology Data Exchange (ETDEWEB)

    Hollinger, Raphael; Buettner, Markus; Erge, Thomas; Wille-Haussmann, Bernhard; Wittwer, Christof [Fraunhofer-Institut fuer Solare Energiesysteme ISE, Freiburg (Germany)

    2011-07-01

    The use of micro-CHP units in multifamily buildings is particularly profitable if the produced electricity - coupled with the thermal energy production - is used directly by the operator or sold locally. To maximize the share of own consumption the use of thermal storages to operate the CHP at times of high electrical demand is necessary. By conducting a field test it is shown that the share of own consumption can be increased by predictive control of CHP with thermal storages. The approach increases the profitability of the CHP operation under today's conditions as well as the system integration of the CHP electricity. (orig.)

  8.   Transformation of the industrial harbor areas to housing areas

    DEFF Research Database (Denmark)

    Rehder, Meike

    2009-01-01

    Research question: How to read the universal (understood as the common and the social) and the individual (understood as the specific, private and intimate) in the meeting between urban and housing space? Questions in the project: How do the exterior spaces in these new harbour areas come to being......? What influences are at play in the development of them? What influences the approval and the functioning of these housing areas?...

  9. Systems Evaluation at the Cool Energy House

    Energy Technology Data Exchange (ETDEWEB)

    Williamson, J. [Steven Winter Associates, Inc., Norwalk, CT (United States); Puttagunta, S. [Steven Winter Associates, Inc., Norwalk, CT (United States)

    2013-09-01

    Steven Winter Associates, Inc. (SWA) monitored several advanced mechanical systems within a 2012 deep energy retrofitted home in the small Orlando suburb of Windermere, FL. This report provides performance results of one of the home's heat pump water heaters (HPWH) and the whole-house dehumidifier (WHD) over a six month period. In addition to assessing the energy performance of these systems,this study sought to quantify potential comfort improvements over traditional systems. This information is applicable to researchers, designers, plumbers, and HVAC contractors. Though builders and homeowners can find useful information within this report, the corresponding case studies are a likely better reference for this audience.

  10. Systems Evaluation at the Cool Energy House

    Energy Technology Data Exchange (ETDEWEB)

    J. Williamson and S. Puttagunta

    2013-09-01

    Steven Winter Associates, Inc. (SWA) monitored several advanced mechanical systems within a 2012 deep energy retrofitted home in the small Orlando suburb of Windermere, FL. This report provides performance results of one of the home's heat pump water heaters (HPWH) and the whole-house dehumidifier (WHD) over a six month period. In addition to assessing the energy performance of these systems, this study sought to quantify potential comfort improvements over traditional systems. This information is applicable to researchers, designers, plumbers, and HVAC contractors. Though builders and homeowners can find useful information within this report, the corresponding case studies are a likely better reference for this audience.

  11. Using in-house expertise in negotiating power sales contracts for industrial cogeneration plants

    International Nuclear Information System (INIS)

    Yott, R.A.

    1992-01-01

    Energy has always been a strategic component of Air Products and Chemicals production costs. In fact, Air Products is among the top consumers of electricity and natural gas in the U.S. Consequently, Air Products has developed a multifaceted Corporate Energy Department. The advent of PURPA in 1978 and the success enjoyed by Air Products in selling industrial gases over the fence to industrial customers as a integral part of their manufacturing system led Air Products into the industrial cogeneration business. This paper briefly summarizes Air Products entry into the industrial cogeneration market and the role that Air Products Energy Department has played in making this new business focus a success. It highlights how Air Products has been able to transfer its in-house expertise in purchasing power to the marketing, bidding, contract negotiation and avoided cost forecasting functions so critical in the successful development of industrial cogeneration opportunities. At Air Products we believe our long association with the utility industry first as a cost-conscious customer and more recently as an electric energy supplier has enhanced our competitive position. The same success story could be repeated at your company if you know what to look for and are not afraid to expand the horizons and responsibilities of your energy department

  12. Potential implementation of light steel housing system for affordable housing project in Malaysia

    Science.gov (United States)

    Saikah, M.; Kasim, N.; Zainal, R.; Sarpin, N.; Rahim, M. H. I. A.

    2017-11-01

    An unparalleled number between housing demand and housing supply in Malaysia has increased the housing prices, which gives consequences to the homeownership issue. One way to reduce the housing price is by faster increase the number of affordable housing, but the construction sector faces difficulties in delivering as expected number by using conventional and current industrialised building system (IBS) due to the issue related high project cost, time and labour. Therefore, light steel housing (LSH) system as one of another type of IBS method can be utilised in housing construction project. This method can replace the conventional method that was currently used in the construction of affordable housing project. The objectives of this study are to identify the potential of LSH and influencing factors of system implementation. This is an initial stage to review the previous study related to LSH implementation in developed and developing countries. The previous study will be analysed regarding advantages and disadvantages of LSH and factors that influence the implementation of the system. Based on the literature review it is expected to define the potential and influencing factors of the LSH system. The findings are meaningful in framing and enhance construction housing method of an affordable housing project in Malaysia.

  13. Delay Mitigation in the Malaysian Housing Industry: A Structural Equation Modelling Approach

    Directory of Open Access Journals (Sweden)

    Chang Saar Chai

    2015-01-01

    Full Text Available The housing industry is one of the major contributors to the economy in Malaysia due to the constantly high housing demand. The housing demand has increased due to the rapid growth in population and urbanisation in the country. One of the major challenges in the housing industry is the late delivery of housing supply, which in some instances leads to sick and abandoned housing projects. Despite being extensively investigated, th in a negative impact, there is a strong need to review the housing delay mitigation measures practised in Malaysia. This paper aims to evaluate the current delay mitigation measures and its main objective is to explore the relationship between the mitigation measures and delay in housing via a Structural Equation Modelling (SEM approach. A questionnaire survey through an online survey tool was conducted across 13 states and three Federal Territories in Malaysia. The target respondents are the local authorities, developers, consultants (principal submitting persons and contractors. The findings show that 17 predictive, preventive, organisational or corrective. This paper demonstrates that preventive measures are the most influential mitigation measures for housing delivery delay.

  14. Causes of defects in the South African housing construction industry ...

    African Journals Online (AJOL)

    Martyn le Roux, Department of Quantity Surveying, P.O. Box 77000, Nelson Mandela ... in South Africa. There is a shortage of skilled people in the South. African construction industry; local and international companies within the construction industry are joining ..... observation of construction of any new home or building.

  15. A house divided: cooperative and competitive recruitment in vital industries.

    Science.gov (United States)

    Willis, William K; Muslin, Ivan; Timko, Karlyn N

    2016-03-01

    To propose a theoretical based model approach to address the nursing shortage problem of recruiting qualified applicants. Vital industries such as nursing and trucking face a large labour shortage. A literature review focusing on recruitment and realistic job previews examines relevant theories and an indication of the focus of similar research. Game theory illustrates cooperative and competitive recruitment strategies in vital industries. Proposition and model development where cooperative or competitive strategies for recruitment can either increase or decrease the employee applicant pool. Institutional theory states that firms within a population become isomorphic in nature. Firms employing cooperative or competitive strategies for recruitment can change organisational practices through isomorphic processes. Industries facing a labour market shortage using cooperative strategy will use realistic job previews accurately to disseminate information about industry jobs. Realistic job previews will increase the applicant pool through individuals self-selecting into, rather than out of, the applicant pool. Recruitment in the nursing industry has been examined at the individual applicant and organisational level, yet the overall industry has been ignored. As nursing shortages continue, viewing recruitment at the macro level (the overall industry) is appropriate. Game theory as proposed provides opportunities for current research at the industry level. © 2015 John Wiley & Sons Ltd.

  16. Matching supply networks to a modular product architecture in the house-building industry

    NARCIS (Netherlands)

    Hofman, Erwin; Voordijk, Johannes T.; Halman, Johannes I.M.

    2009-01-01

    Notions of aligning modular product architectures and buyer-supplier relationships, which have spread widely through other industrial and retail sectors, have largely bypassed the house-building industry. The major question posed in this study is: what types of contractor-supplier relationships are

  17. management practices in the ghanaian house building industry

    African Journals Online (AJOL)

    User

    Building and Road Research Institute, Centre for Scientific and Industrial Research,. Fumuesua ... expected production target amidst an acute .... the responsibility for the management of design .... substitutes already being manufactured since.

  18. Design of intelligent house system based on Yeelink

    Directory of Open Access Journals (Sweden)

    Lin Zhi-Huang

    2016-01-01

    Full Text Available In order to monitor the security situation of house in real time, an intelligent house remote monitoring system is designed based on Yeelink cloud services and ZigBee wireless communication technology. This system includes three parts, ZigBee wireless sensor networks, intelligent house gateway and Yeelink Cloud Services. Users can access Yeelink website or APP to get real time information in the house, receiving information including gas concentration, temperature. Also, remote commands can be sent from mobile devices to control the household appliances. The user who can monitor and control the house effectively through a simple and convenient user interface, will feel much more safe and comfortable.

  19. Industrial influences on an accelerator control system

    International Nuclear Information System (INIS)

    Westervelt, R.

    1992-01-01

    Industrial applications of a control system package have extended from industrial research to process control. While the requirements of these applications have much in common with accelerator controls, there are always extensions, different emphases, and additional requirements. These often add to the applicability of the software in all fields and certainly keep the development team challenged. This paper discusses some of the influences that industrial applications such as power distribution monitoring, casting and rolling mills, and aircraft engine testing have on software originally designed for scientific research. We also discuss some of the differences in the software development process between development for in-house use and development for sales and industrial use. (Author) ref., fig

  20. Influence of housing system on the growth and histological structure ...

    African Journals Online (AJOL)

    LESZEK

    2014-04-10

    Apr 10, 2014 ... groups according to their sex and housing system: intensive system (IS) and outdoor system (OS). A ...... biceps femoris muscle fibre size in female and male MR71 ducks kept .... This information may be another (a similar.

  1. House-internal heating systems; Husinterna vaermesystem

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, Per-Olof; Wollerstrand, Janusz [Lund Univ. (Sweden). Dept. of Heat and Power Engineering

    2005-07-01

    In this report the placement of the circulation-pump in of waterborne radiator systems, as well as their filling and deairation are investigated. The study was done by literature studies and interviews with consultants and companies active on the HVAC-market. It was concluded that different placements of the pump in relationship to the heat exchanger exist, and the arguments for the choice of placement are varying. The main explanation of the choice of placement is that it is based on experience/or by practical reasons. The most important factor influencing the placement of the pump found, was how the pump is situated in relation to the expansion-tank. To maintain pressure in the whole system the expansion-tank should be placed on the suction side of the pump without any intermediate pressure-dropping devices in between. This placement ensures overpressure in the whole radiator-system and reduces the risk of unwanted leak in of air. To avoid cavitation sufficient static pressure on the suction side of the pump is necessary. The pressure increases with the temperature, which must be taken into consideration if the pump is placed on the warm side of the heat-exchanger. From this point of view a placement in the return-pipe from the radiator-system is to be preferred. Before advices for HVAC-branch regarding placement of the circulation-pump in the heating systems can be implemented, it is of big importance to analyse and clearly specify the advantages and disadvantages of a certain placement of the pump. There is a need of directions to get house-internal systems to operate properly together with district heating system. This is especially important when older heating systems with burners and shunt valves are being connected. Filling and deairation of the radiator system is of great importance for the function of the system. A radiator-system with significant level of air remains is difficult to adjust and will not work properly. Air in the radiators leads to

  2. Zebrafish housing systems: a review of basic operating principles and considerations for design and functionality.

    Science.gov (United States)

    Lawrence, Christian; Mason, Timothy

    2012-01-01

    The strategies for housing zebrafish used in biomedical research have evolved considerably over the past three decades. To keep pace with the rapid expansion and development of the zebrafish model system, the field has generally moved from keeping fish at the level of aquarium hobbyist to that of industrialized, recirculating aquaculture. Numerous commercial system vendors now offer increasingly sophisticated housing systems based on design principles that maximize the number of animals that can be housed in a given space footprint, and they are thus able to support large and diverse research programs. This review is designed to provide managers, lab animal veterinarians, investigators, and other parties responsible for care and use of these animals with a comprehensive overview of the basic operating and design principles of zebrafish housing systems. This information can be used to help plan the construction of new facilities and/or the upgrade and maintenance of existing operations.

  3. Developing and Evaluating a Virtual Reality-Based Navigation System for Pre-Sale Housing Sales

    Directory of Open Access Journals (Sweden)

    Yi-Kai Juan

    2018-06-01

    Full Text Available Virtual reality (VR technologies have advanced rapidly in the past few years, and many industries have adopted these cutting-edge technologies for diverse applications to improve their industrial competitiveness. VR has also received considerable recognition in the architecture, engineering, and construction industries, because it can potentially reduce project costs, delivery time, and quality risks, by allowing users to experience unbuilt spaces before breaking ground, resolving construction conflicts virtually, and reviewing complex details in immersive environments. In the real estate market, VR can also play an important role in affecting buyers’ housing purchasing decisions, especially for housing markets in Asia, where the pre-sale system is extremely common. Applying VR to the pre-sale housing system is promising, because the concept of pre-sale refers to a strategy adopted by developers that sell housing through agreements on residential units that have not been constructed yet, and VR at this stage could be a useful tool for visual communication in a true-to-scale environment. However, does VR really benefit sales in the housing market? Can clients accept using VR, instead of using traditional materials (i.e., paper-based images and physical models, to navigate and experience housing projects? The objective of this study is to develop a VR-based navigation system for a pre-sale housing project in Taiwan. We invited 30 potential clients to test the system and explore the implications of using it for project navigation. The results reveal that VR enhances the understandings of a project (perceived usefulness and increases clients’ intention to purchase, while the operation of VR (perceived ease-of-use is still the major challenge to affect clients’ satisfaction and the developer’s acceptance with respect to applying it to future housing sales.

  4. Job-housing imbalance and commuting of coastal industrial town in Liaoning province, China

    Science.gov (United States)

    Chen, Fei; Lu, Wei; Cai, Jun; Yang, Qiyao

    2017-11-01

    During the Twelve Five period, China promulgated industrial policies promote the energy-intensive industries relocate to coastal areas in order to utilize marine shipping resources. Consequently, some major state-owned steel and petrochemical enterprises have relocated and resulted in a large scale coastal area development. Restricted by the port construction, most of the coastal industrial areas are located in the outer suburbs. To balance between employment and housing, new industrial coastal towns were constructed. In this paper, we adopt a case-study approach to analysis some typical industrial coastal towns of Liaoning Province situated in the Bohai Bay, which is currently under rapid economic growth. Our investigations reflect the common phenomenon of long distance commuting and massive amount of vacant residences. More specifically, large plant relocation caused hundreds of kilometers of daily commute and enterprises had to provide housing subsidies and education incentives to motivate employees to relocate to coastal areas. Nonetheless, many employees still refuse to relocate due to job stability, diverse needs of family members and access to convenient services. These employees averaged 4 hours of commute daily and some who lived further had to reside in temporary industrial housing units and subject to long-term family separation. As a result, only a small portion of employees purchase new coastal residences but mostly for investment and retirement purposes, leading to massive vacancy and ghost-town phenomenon. In contrast to the low demand, coastal areas tend to develop large amount of residences prior to industrial relocation, which may be directly related to local government finances. Some local governments have sold residential land to developers to general revenue to support the subsequent industrial development. Subject to the strong preference of ocean- view, residential housing developers tend to select coast-line land to construct new residential

  5. The impact of hazardous industrial facilities on housing prices: A comparison of parametric and semiparametric hedonic price models

    DEFF Research Database (Denmark)

    Grislain-Letrémy, Céline; Katossky, Arthur

    2014-01-01

    The willingness of households to pay for prevention against industrial risks can be revealed by real estate markets. By using very rich microdata, we study housing prices in the vicinity of hazardous industries near three important French cities. We show that the impact of hazardous plants...... to important biases in the estimated value of the impact of hazardous plants on housing values....

  6. Housing First and Photovoice: Transforming Lives, Communities, and Systems

    Science.gov (United States)

    Barile, John P.; Ogawa, Terry Yasuko; Peralta, Nelson; Bugg, Reumell; Lau, John; Lamberton, Thomas; Hall, Corazon; Mori, Victor

    2018-01-01

    This article presents findings from a community-based participatory evaluation of a Housing First program on the Island of O’ahu. In this study, clients in a Housing First program used Photovoice to evaluate the program and to advocate for progressive housing policies. Written together by members of the Housing First Photovoice group, this collaborative article describes the outcomes from both the Housing First program and the Photovoice project and demonstrates the ways in which participatory program evaluations can interact with client-driven programs like Housing First to produce a cumulative, transformative impact. Findings suggest that community psychologists hoping to re-engage with community mental health systems through enacting transformative change should consider taking a community-based participatory approach to program evaluation because increased client voice in community mental health programs and their evaluations can have far-reaching, transformative impacts for research, practice, and policy. PMID:29323410

  7. Integrated decision-making about housing, energy and wellbeing: a qualitative system dynamics model.

    Science.gov (United States)

    Macmillan, Alexandra; Davies, Michael; Shrubsole, Clive; Luxford, Naomi; May, Neil; Chiu, Lai Fong; Trutnevyte, Evelina; Bobrova, Yekatherina; Chalabi, Zaid

    2016-03-08

    The UK government has an ambitious goal to reduce carbon emissions from the housing stock through energy efficiency improvements. This single policy goal is a strong driver for change in the housing system, but comes with positive and negative "unintended consequences" across a broad range of outcomes for health, equity and environmental sustainability. The resulting policies are also already experiencing under-performance through a failure to consider housing as a complex system. This research aimed to move from considering disparate objectives of housing policies in isolation to mapping the links between environmental, economic, social and health outcomes as a complex system. We aimed to support a broad range of housing policy stakeholders to improve their understanding of housing as a complex system through a collaborative learning process. We used participatory system dynamics modelling to develop a qualitative causal theory linking housing, energy and wellbeing. Qualitative interviews were followed by two interactive workshops to develop the model, involving representatives from national and local government, housing industries, non-government organisations, communities and academia. More than 50 stakeholders from 37 organisations participated. The process resulted in a shared understanding of wellbeing as it relates to housing; an agreed set of criteria against which to assess to future policy options; and a comprehensive set of causal loop diagrams describing the housing, energy and wellbeing system. The causal loop diagrams cover seven interconnected themes: community connection and quality of neighbourhoods; energy efficiency and climate change; fuel poverty and indoor temperature; household crowding; housing affordability; land ownership, value and development patterns; and ventilation and indoor air pollution. The collaborative learning process and the model have been useful for shifting the thinking of a wide range of housing stakeholders towards a more

  8. Certification of passive houses : Lessons from real indoor climate systems

    NARCIS (Netherlands)

    Mlecnik, E.

    2009-01-01

    This paper examines if and how indoor climate systems are important for passive house certification. The research subjects are passive houses in Belgium, occupied by owner-clients. These have received a quality assurance certificate from an independent organization. Through interviews with the

  9. High Power UV LED Industrial Curing Systems

    Energy Technology Data Exchange (ETDEWEB)

    Karlicek, Robert, F., Jr; Sargent, Robert

    2012-05-14

    UV curing is a green technology that is largely underutilized because UV radiation sources like Hg Lamps are unreliable and difficult to use. High Power UV LEDs are now efficient enough to replace Hg Lamps, and offer significantly improved performance relative to Hg Lamps. In this study, a modular, scalable high power UV LED curing system was designed and tested, performing well in industrial coating evaluations. In order to achieve mechanical form factors similar to commercial Hg Lamp systems, a new patent pending design was employed enabling high irradiance at long working distances. While high power UV LEDs are currently only available at longer UVA wavelengths, rapid progress on UVC LEDs and the development of new formulations designed specifically for use with UV LED sources will converge to drive more rapid adoption of UV curing technology. An assessment of the environmental impact of replacing Hg Lamp systems with UV LED systems was performed. Since UV curing is used in only a small portion of the industrial printing, painting and coating markets, the ease of use of UV LED systems should increase the use of UV curing technology. Even a small penetration of the significant number of industrial applications still using oven curing and drying will lead to significant reductions in energy consumption and reductions in the emission of green house gases and solvent emissions.

  10. Ventilation systems in houses. Special issue; Woonhuisventilatie. Special

    Energy Technology Data Exchange (ETDEWEB)

    Op ' t Veld, P.; Van der Aa, A. [Cauberg-Huygen Raadgevend Ingenieurs, Rotterdam (Netherlands); Verschoor, M.J.E. [Afdeling Koudetechniek en Warmtepompen, TNO Milieu, Energie en Procesinnovatie TNO-MEP, Apeldoorn (Netherlands); Van Gulik, L.H. [Itho, Scheidam (Netherlands); Van der Mark, K.; Overman, P. [AGPO, Breda (Netherlands); Roemer, J.C.; Schuitema, R. [ECN Duurzame Energie in de Gebouwde Omgeving DEGO, Petten (Netherlands); Weterings, M. [GGD voor Rotterdam e.o., Rotterdam (Netherlands); Rosenmai, T.; Rasmussen, S. [Copenhagen Business School, Copenhagen (Denmark); Vollebregt, R. [Bureau Kent, Utrecht (Netherlands); Smeets, L.J.M. [Nederlandse onderneming voor energie en milieu Novem, Utrecht (Netherlands)

    2001-06-01

    In 10 articles attention is paid to several aspects with respect to ventilation of houses. This issue includes an overview of suppliers of high-efficiency heat recovering balanced ventilation systems.

  11. A CRITICAL REVIEW ON THE EFFECT OF HOUSING INDUSTRY TO THE GLOBAL FINANCIAL CRISIS: THE CASE OF TURKEY

    Directory of Open Access Journals (Sweden)

    Cem BERK

    2010-01-01

    Full Text Available The overall aim of the research presented is to investigate the relationship between the macroeconomic factors linked with financial crises and housing industry in Turkey. The research includes empirical investigation in a regression based model using mostly the Turkish market data. The ability of public intervention, indicated by central bank reserves and corporate bankruptcies are statistically effective in the performance of housing market. There is weak statistical dependence of housing on financial crisis. The research is based on Turkish market data between the period 2002-2009. The research can be extended with global market data especially from the emerging market for a comparative study. Research in this field should focus more to industry dynamics rather than macroeceonomic variables explaining crisis to explore housing sector dynamics. The real estate managers should look to central bank reserves and corporate bankruptcies more closely as a macroeceonomic variable affecting housing industry. The effect of macroeceonomic variables in the period of financial volatility is limited in the housing market, whereas industry factors should be analized. Central bank reserves and corporate bankruptcies are important indicators of housing industry growth that can be used as an instrument. To to the author’s knowledge, the paper is the first study to investigate the link between financial crisis and housing market in Turkey.

  12. Housing system and laying hen strain impacts on egg microbiology.

    Science.gov (United States)

    Jones, D R; Anderson, K E

    2013-08-01

    Alternative hen housing is becoming more commonplace in the egg market. However, a complete understanding of the implications for alternative housing systems on egg safety has not been achieved. The current study examines the impact of housing Hy-Line Brown, Hy-Line Silver Brown, and Barred Plymouth Rock hens in conventional cage, cage-free, and free range egg production systems on shell microbiology. Eggs were collected at 4 sampling periods. Egg shell emulsion pools were formed and enumerated for total aerobic organisms, Enterobacteriaceae, and yeast and mold counts. Hy-Line Brown and Hy-Line Silver Brown hens produced eggs with significantly (P Eggs from conventional cages had significantly different (P eggs with significantly different (P eggs having the lowest level of contamination for the hen strains. There were no differences within each strain among housing systems for yeast and mold contamination. The study shows that hen strain has an effect on egg microbial levels for various housing systems, and egg safety should be considered when making hen strain selections for each housing system.

  13. Survey among Belgian pig producers about the introduction of group housing systems for gestating sows.

    Science.gov (United States)

    Tuyttens, F A M; Van Gansbeke, S; Ampe, B

    2011-03-01

    There is a global move from individual to group housing of gestating sows. In the European Union, individual gestating stalls will be banned by 2013. Just like in other industrialized regions, these stalls have been the standard housing system for intensively kept sows from the 1960s onward in the Flemish region of Belgium. Because the socioeconomic consequences for the pig industry may be far-reaching and because farmer attitude may influence the realization of the hoped-for improvement in animal welfare in practice, we conducted a survey from 2003 until 2009 among representative samples of Flemish pig producers every 2 yr. The share of farms with group housing increased from 10.5% in 2003 to 29.8% in 2007, but then dropped to 24.6% in 2009. It appears that after 2005 users of old group housing systems in particular stopped farming. Because sow herd size increased more on farms with vs. without group housing and because the proportion of the herd that was group-housed also tended to increase between 2003 to 2009, the change to group housing took place faster when expressed at the level of the sow (from 9.1% in 2003 to 34.1% in 2009) instead of farm. The percentage of farmers planning to convert to group housing within 2 yr was 4.1% in 2003, and 6 to 7% thereafter. These were typically young farmers (P = 0.006) with a large sow herd (P manual feed delivery. User satisfaction was generally high but depended on whether or not all gestating sows were kept in group (P importance of economic reasons (P = 0.007) and type of labor (P = 0.043) decreased with the age of the system. In 2003 and 2005 the main reason for not having converted to group housing was that farmers would stop keeping sows by 2013. In 2007 and 2009 the reasons mainly concerned uncertainty about the future and maximally delaying the conversion. Belgium is one of the European Union countries where the pig industry is expected to undergo drastic changes during the few years remaining before the ban on

  14. Protection of industrial power systems

    CERN Document Server

    DAVIES, T

    2006-01-01

    The protection which is installed on an industrial power system is likely to be subjected to more difficult conditions than the protection on any other kind of power system. Starting with the many simple devices which are employed and covering the whole area of industrial power system protection, this book aims to help achieve a thorough understanding of the protection necessary.Vital aspects such as the modern cartridge fuse, types of relays, and the role of the current transformer are covered and the widely used inverse definite-minimum time overcurrent relay, the theory of the M

  15. A CRITICAL REVIEW ON THE EFFECT OF HOUSING INDUSTRY TO THE GLOBAL FINANCIAL CRISIS: THE CASE OF TURKEY

    OpenAIRE

    BERK, Cem

    2010-01-01

    The overall aim of the research presented is to investigate the relationship between the macroeconomic factors linked with financial crises and housing industry in Turkey. The research includes empirical investigation in a regression based model using mostly the Turkish market data. The ability of public intervention, indicated by central bank reserves and corporate bankruptcies are statistically effective in the performance of housing market. There is weak statistical dependence of housing o...

  16. Self-adjusting house-heating control system

    Energy Technology Data Exchange (ETDEWEB)

    Hacker, O; Ott, M

    1983-01-01

    Only small expenditure in terms of hard- and software is needed for the heating-control system described here to keep the house-room temperature in day- and night (reduced temperature)-operation precisely at the desired degree C. No control adjustment is needed as the computer - in this case an EMUF-model - adapts itself to changing conditions like type of house, weather conditions etc. Perfect control and good control dynamic lead to considerable savings of energy.

  17. Small and Shaping the Future Energy Eco-house System

    Science.gov (United States)

    Furukawa, Ryuzo; Takahashi, Hideyuki; Sato, Yoshinori; Sasaki, Hiroshi; Isu, Norifumi; Ohtsuka, Masuo; Tohji, Kazuyuki

    2010-11-01

    The objective of this research is to develop the elemental technology of the small and thin energy collection system from water, wind, and others in the house, and examine them at the eco-house which will be built at Tohoku University on March 2010. This small energy storage system will contribute to reduce 10% of greenhouse gas emission from household electricity. This project is done by three following groups. 1st group (NEC-Tokin Co. Ltd.) will develop the technologies on the accumulation of electric power pressured from low electric power in which electricity is generated and on the cooperation with AC power supply used for domestic use for this eco-house system. 2nd group (INAX Co. Ltd.) will develop the elemental technology of the slight energy collection system from tap water in the home using a small hydroelectric generator for this eco-house system. 3rd group (Shoei Co. Ltd.) will develop the technologies on existent magnetic gear device, health appliances (Exercise bike), wind power generator, for this eco-house system. Tokoku University compiles these groups. Furthermore, I develop a search of unused small energy and the use technology, and propose a new energy supply system using solar cell and Li ion secondary battery.

  18. Systems Biology of Industrial Microorganisms

    Science.gov (United States)

    Papini, Marta; Salazar, Margarita; Nielsen, Jens

    The field of industrial biotechnology is expanding rapidly as the chemical industry is looking towards more sustainable production of chemicals that can be used as fuels or building blocks for production of solvents and materials. In connection with the development of sustainable bioprocesses, it is a major challenge to design and develop efficient cell factories that can ensure cost efficient conversion of the raw material into the chemical of interest. This is achieved through metabolic engineering, where the metabolism of the cell factory is engineered such that there is an efficient conversion of sugars, the typical raw materials in the fermentation industry, into the desired product. However, engineering of cellular metabolism is often challenging due to the complex regulation that has evolved in connection with adaptation of the different microorganisms to their ecological niches. In order to map these regulatory structures and further de-regulate them, as well as identify ingenious metabolic engineering strategies that full-fill mass balance constraints, tools from systems biology can be applied. This involves both high-throughput analysis tools like transcriptome, proteome and metabolome analysis, as well as the use of mathematical modeling to simulate the phenotypes resulting from the different metabolic engineering strategies. It is in fact expected that systems biology may substantially improve the process of cell factory development, and we therefore propose the term Industrial Systems Biology for how systems biology will enhance the development of industrial biotechnology for sustainable chemical production.

  19. AUTOMATIC CONTROL SYSTEM ОF REGIONAL BOILER HOUSE

    Directory of Open Access Journals (Sweden)

    V. A. Sednin

    2005-01-01

    Full Text Available Implementation of an automatic control system is one of directions that promotes to increase an operational efficiency of a heat supply system. A heating boiler house in Surgut (Russia is taken as an example to demonstrate an actual realization of such system.

  20. Towards a sustainable industrial system

    DEFF Research Database (Denmark)

    Evans, Steve; Gregory, Mike; Ryan, Chris

    Our industrial system has been responsible for raising the quality of life of peoples around the world. It is becoming increasingly clear however, that the current system is creating unintended and serious consequences for the environment at a global level. Change on a significant scale is required...... who have not yet experienced them without exceeding the limits of our planet. This paper presents cases where industry is already taking action, and argues that: • dramatic improvements can be made by deploying existing expertise at the level of individual businesses • relying on technology alone...

  1. TCR industrial system integration strategy

    CERN Document Server

    Bartolomé, R; Sollander, P; Martini, R; Vercoutter, B; Trebulle, M

    1999-01-01

    New turnkey data acquisition systems purchased from industry are being integrated into CERN's Technical Data Server. The short time available for system integration and the large amount of data per system require a standard and modular design. Four different integration layers have been defined in order to easily 'plug in' industrial systems. The first layer allows the integration of the equipment at the digital I/O port or fieldbus (Profibus-DP) level. A second layer permits the integration of PLCs (Siemens S5, S7 and Telemecanique); a third layer integrates equipment drivers. The fourth layer integrates turnkey mimic diagrams in the TCR operator console. The second and third layers use two new event-driven protocols based on TCP/IP. Using this structure, new systems are integrated in the data transmission chain, the layer at which they are integrated depending only on their integration capabilities.

  2. 76 FR 10135 - Public Housing Evaluation and Oversight: Changes to the Public Housing Assessment System (PHAS...

    Science.gov (United States)

    2011-02-23

    ... Vol. 76 Wednesday, No. 36 February 23, 2011 Part III Department of Housing and Urban Development 24 CFR Parts 901, 902, and 907 Public Housing Evaluation and Oversight: Changes to the Public Housing...

  3. A Conceptual Model of the Pasadena Housing System

    Science.gov (United States)

    Hirshberg, Alan S.; Barber, Thomas A.

    1971-01-01

    During the last 5 years, there have been several attempts at applying systems analysis to complex urban problems. This paper describes one such attempt by a multidisciplinary team of students, engineers, professors, and community representatives. The Project organization is discussed and the interaction of the different disciplines (the process) described. The two fundamental analysis questions posed by the Project were: "Why do houses deteriorate?" and "Why do people move?" The analysis of these questions led to the development of a conceptual system model of housing in Pasadena. The major elements of this model are described, and several conclusions drawn from it are presented.

  4. Thermal Storage Systems Assessment for Energy Sustainability in Housing Units

    Directory of Open Access Journals (Sweden)

    Tania I. Lagunes Vega

    2016-04-01

    Full Text Available In order to achieve greater enhancements in energy sustainability for housing, the function and efficiency of two different passive cooling systems were studied: encapsulated water in recycled bottles of Polyethylene terephthalate (PET and polystyrene plates, in comparison with standard concrete slab systems, which are customarily used in housing. Experiments were placed over a tile surface, in which temperature changes were monitored for a period of 20 days from 08:00 to 20:00. The efficiency of passive thermal storage systems was endorsed through statistical analysis using the “SPSS” software. This resulted in a 17% energy saving, thus promoting energy sustainability in housing units, which reduces the use of electrical appliances required to stabilize conditions to achieve optimum thermal comfort for the human body inside a house, therefore, reducing electrical power consumption, CO2 emissions to the atmosphere and generating savings. Due to the complexity of a system with temperature changes, a fractal analysis was performed for each experimental system, using the “Benoit” software (V.1.3 with self-compatible tools of rescaled range (R/S and a wavelets method, showing that the thermal fluctuations on the tiles with the thermal storage system adapt to the rescaled range analysis and the regular tiles adapt to the wavelets method.

  5. Influence of housing system on the growth and histological structure ...

    African Journals Online (AJOL)

    This study was aimed at determining the effect of housing systems on the growth, feed conversion ratio (FCR), meatiness and size of muscle fibres of Pekin (P44) and Muscovy (MR71) ducks. Each genetic group included 360 birds (180 males and 180 females). The ducks were divided into four experimental groups ...

  6. Effects of different housing systems on growth performance and ...

    African Journals Online (AJOL)

    Effects of different housing systems on growth performance and carcass yield of two breeds of turkey. ... Bulletin of Animal Health and Production in Africa ... The results on carcass yield showed a significantly (p<0.05) higher plucked weight ...

  7. Computer systems and nuclear industry

    International Nuclear Information System (INIS)

    Nkaoua, Th.; Poizat, F.; Augueres, M.J.

    1999-01-01

    This article deals with computer systems in nuclear industry. In most nuclear facilities it is necessary to handle a great deal of data and of actions in order to help plant operator to drive, to control physical processes and to assure the safety. The designing of reactors requires reliable computer codes able to simulate neutronic or mechanical or thermo-hydraulic behaviours. Calculations and simulations play an important role in safety analysis. In each of these domains, computer systems have progressively appeared as efficient tools to challenge and master complexity. (A.C.)

  8. Advanced Controls for Residential Whole-House Ventilation Systems

    Energy Technology Data Exchange (ETDEWEB)

    Turner, William [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Walker, Iain [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sherman, Max [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-08-01

    Whole-house ventilation systems are becoming commonplace in new construction, remodeling/renovation, and weatherization projects, driven by combinations of specific requirements for indoor air quality (IAQ), health and compliance with standards, such as ASHRAE 62.2. Ventilation systems incur an energy penalty on the home via fan power used to drive the airflow, and the additional space-conditioning load associated with heating or cooling the ventilation air. Finding a balance between IAQ and energy use is important if homes are to be adequately ventilated while not increasing the energy burden. This study used computer simulations to examine RIVEC the Residential Integrated Ventilation Controller - a prototype ventilation controller that aims to deliver whole-house ventilation rates that comply with ventilation standards, for the minimum use of energy. Four different whole-house ventilation systems were simulated, both with and without RIVEC, so that the energy and IAQ results could be compared. Simulations were conducted for 13 US climate zones, three house designs, and three envelope leakage values. The results showed that the RIVEC controller could typically return ventilation energy savings greater than 40percent without compromising long-term chronic or short-term acute exposures to relevant indoor contaminants. Critical and average peak power loads were also reduced as a consequence of using RIVEC.

  9. Overall welfare assessment of pregnant sow housing systems based on interviews with experts

    NARCIS (Netherlands)

    Bracke, M.B.M.; Metz, J.H.M.; Spruijt, B.M.; Dijkhuizen, A.A.

    1999-01-01

    In interviews with 11 pig experts the main housing systems for pregnant sows were identified as tethering (T), individual housing in stalls (IS), group housing with stalls (GS), trickle feeding or biofix (B), electronic sow feeding (ESF), and outdoor housing with huts (O). The family pen system

  10. The deployment of decentralised energy systems as part of the housing growth programme in the UK

    International Nuclear Information System (INIS)

    Williams, Jo

    2010-01-01

    The housing growth programme could offer an opportunity for accelerating the deployment of decentralised renewable energy systems (DRES) in the UK. The Government hopes to leverage private sector investment into DRES as part of new housing projects. The aim of this paper is to assess whether current regulatory and funding frameworks are sufficient to achieve this. The question is explored by drawing on the experience of developers, local authorities, energy utilities and service companies operating in the largest housing growth region in the UK-Thames Gateway. Their experience suggests that the current low intervention approach will be insufficient to generate the shift required in both industries. In order to be more successful economic and regulatory instruments should focus on producers (house-builders and energy providers) rather than consumers (households). Tighter regulation is needed to ensure that producers have a responsibility to install DRES as part of new developments, to enable connection to the grid, to ensure a sustained financial return from investment and revenue is spent on the expansion of new renewable energy infrastructure. This regulatory framework must be under-pinned by substantial funds focused on producers. Greater intervention is needed if DRES is to be included in new housing development.

  11. Public Housing Smarts: Two Universities Discover a Trove of Opportunity in New Orleans' Public Housing System.

    Science.gov (United States)

    Boulard, Garry

    1998-01-01

    Tulane University and Xavier University (Louisiana) are both taking an active role in revitalizing the New Orleans public housing authority, the sixth-largest in the country. In partnership with the federal Department of Housing and Urban Development and the city's housing authority, the two institutions are cooperating in a major renovation…

  12. Achievement report for fiscal 1981 on New Energy and Industrial Technology Development Organization-entrusted projects on the development of photovoltaic power system practical application technologies. Research and development of a photovoltaic power demonstration system (Research and development of private house systems); 1981 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyoko hatsuden demonstration system no kenkyu kaihatsu (kojin jutakuyo system no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    Private house systems are investigated for system constitution, detailed design is drawn, and a model house is built. For system control and protection, the power conversion unit is provided with a control which functions to constantly maximize the output. The power conversion unit without an internal oscillator is equipped with another control which functions to output single-phase AC power coincident with the commercial system in voltage and frequency when it is interconnected with the system. The power conversion unit is so designed that it is automatically stopped for the prevention of reverse voltage imposition on the commercial system in case of interruption in the commercial system. In the study of roof panel type solar cells, real-size panels are designed and fabricated, capable of a total of 3kWp. In the study of element devices, a real-size conversion unit is experimentally built and tested in combination with a rectifier and solar cells, and it is found that the unit functions as expected. A model house is designed incorporating the results of the above-said research, and is built in the precinct of a laboratory of the Fuji Electric Co., Ltd. (NEDO)

  13. MOBILE HOUSING AS A FUNCTIONAL-TYPOLOGICAL VARIETY OF THE INDUSTRY OF MODERN CONSTRUCTION

    Directory of Open Access Journals (Sweden)

    MIRONENKO V. P.

    2015-09-01

    energy-efficient residential buildings using alternative energy sources [9]; the urgency of energy conservation in construction in the context of energy conservation for future generations, the use of renewable energy sources (RES and the creation of energy efficient residential buildings with the use of "smart" building in the form of Autonomous control systems [10]; the use of renewable energy sources and secondary energy resources and construction of experimental houses [8]; the creation and formation energy active the property on marginal or degraded due to anthropogenic factors territories [5]; the establishment of new design standards of the dwelling based on the real experience of research, design, construction and operation of energy efficient engineering systems [4]. It seems appropriate to study the problem of mobile and modular housing in the context of the requirements of energy saving and energy efficiency. Conclude. A comparative analysis of the specificity of traditional and alternative (mobile housing allowed us to identify the characteristic functional - typological features of mobile construction affecting its design, manufacture, erection and operation. Along with lighting experience in the use of mobile housing in modern conditions of Ukraine, the alternative variant for the organization of summer holidays for children from mobile homes-modulus.

  14. Industrial ecology: a new perspective on the future of the industrial system.

    Science.gov (United States)

    Erkman, S

    2001-09-22

    Industrial ecology? A surprising, intriguing expression that immediately draws our attention. The spontaneous reaction is that "industrial ecology" is a contradiction in terms, something of an oxymoron, like "obscure clarity" or "burning ice". Why this reflex? Probably because we are accustomed to considering the industrial system as isolated from the Biosphere, with factories and cities on one side and nature on the other, as well as the recurrent problem of trying to minimise th impact of the industrial system on what is "beyond" it: its surroundings, the "environment". As early as the 1950's, this end-of-pipe angle was the one adopted by ecologists, whose first serious studies focused on the consequences of the various forms of pollution on nature. In this perspective on the industrial system, human industrial activity as such remained outside the field of research. Industrial ecology explores the opposite assumption: The industrial system can be seen as a certain kind of ecosystem. After all, the industrial system, just as natural ecosystems, can be described as a particular distribution of materials, energy, and information flows. Furthermore, the entire industrial system relies on resources and services provided by the Biosphere, from which it cannot be dissociated. (It should be specified that "industrial", in the context of industrial ecology, refers to all human activities occurring within modern technological society. Thus, tourism, housing, medical services, transportation, agriculture, etc. are part of the industrial system.) Besides its rigorous scientific conceptual framework (scientific ecology), industrial ecology can also be seen as a practical approach to sustainability. It is an attempt to address the question, "How can the concept of sustainable development be made operational in an economically feasible way?" Industrial ecology represents precisely one of the paths that could provide concrete solutions. Governments have traditionally approached

  15. Investigations of Intelligent Solar Heating Systems for Single Family House

    DEFF Research Database (Denmark)

    Andersen, Elsa; Chen, Ziqian; Fan, Jianhua

    2014-01-01

    Three differently designed intelligent solar heating systems are investigated experimentally in a test facility. The systems provide all the needed yearly heating demand in single family houses. The systems are based on highly stratified tanks with variable auxiliary heated volumes. The tank is a......, the control strategy of intelligent solar heating systems is investigated and the yearly auxiliary energy use of the systems and the electricity price for supplying the consumers with domestic hot water and space heating are calculated....... systems.The system will be equipped with an intelligent control system where the control of the electrical heating element(s)/heat pump is based on forecasts of the variable electricity price, the heating demand and the solar energy production.By means of numerical models of the systems made in Trnsys......Three differently designed intelligent solar heating systems are investigated experimentally in a test facility. The systems provide all the needed yearly heating demand in single family houses. The systems are based on highly stratified tanks with variable auxiliary heated volumes. The tank...

  16. SYNTHESIS OF INFORMATION SYSTEM FOR SMART HOUSE HARDWARE MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Vikentyeva Olga Leonidovna

    2017-10-01

    Full Text Available Subject: smart house maintenance requires taking into account a number of factors: resource-saving, reduction of operational expenditures, safety enhancement, providing comfortable working and leisure conditions. Automation of the corresponding engineering systems of illumination, climate control, security as well as communication systems and networks via utilization of contemporary technologies (e.g., IoT - Internet of Things poses a significant challenge related to storage and processing of the overwhelmingly massive volume of data whose utilization extent is extremely low nowadays. Since a building’s lifespan is large enough and exceeds the lifespan of codes and standards that take into account the requirements of safety, comfort, energy saving, etc., it is necessary to consider management aspects in the context of rational use of large data at the stage of information modeling. Research objectives: increase the efficiency of managing the subsystems of smart buildings hardware on the basis of a web-based information system that has a flexible multi-level architecture with several control loops and an adaptation model. Materials and methods: since a smart house belongs to man-machine systems, the cybernetic approach is considered as the basic method for design and research of information management system. Instrumental research methods are represented by set-theoretical modelling, automata theory and architectural principles of organization of information management systems. Results: a flexible architecture of information system for management of smart house hardware subsystems has been synthesized. This architecture encompasses several levels: client level, application level and data level as well as three layers: presentation level, actuating device layer and analytics layer. The problem of growing volumes of information processed by realtime message controller is attended by employment of sensors and actuating mechanisms with configurable

  17. Industrial and Systems Engineering Applications in NASA

    Science.gov (United States)

    Shivers, Charles H.

    2006-01-01

    A viewgraph presentation on the many applications of Industrial and Systems Engineering used for safe NASA missions is shown. The topics include: 1) NASA Information; 2) Industrial Engineering; 3) Systems Engineering; and 4) Major NASA Programs.

  18. Numerical Investigation of Floor Heating Systems in Low Energy Houses

    DEFF Research Database (Denmark)

    Weitzmann, Peter; Kragh, Jesper; Jensen, Claus Franceos

    2002-01-01

    In this paper an investigation of floor heating systems is performed with respect to heating demand and room temperature. Presently (2001) no commercially available building simulation programs that can be used to evaluate heating demand and thermal comfort in buildings with building integrated....... The model calculates heating demand, room temperatures, and thermal comfort parameters for a person in the room. The model is based on a numerical Finite Control Volume (FCV) method for the heat transfer in walls, ceiling, windows and floor. The model uses both convective and radiative heat transfer...... to the room air and between the room surfaces. The simulation model has been used to calculate heating demand and room temperature in a typical well insulated Danish single-family house with a heating demand of approximately 6000 kWh per year, for a 130 m² house. Two different types of floor heating systems...

  19. Building “with the Systems” vs. Building “in the System” of IMS Open Technology of Prefabricated Construction: Challenges for New “Infill” Industry for Massive Housing Retrofitting

    Directory of Open Access Journals (Sweden)

    Jelena Nikolic

    2018-05-01

    Full Text Available Post-war industrialized housing between 1955 and 1985 in Belgrade and its special form of integrated prefabrication has been analyzed with a strong interest in transformation capacity of industrialized building model (IBM on different technical levels. Research field is massive housing up to 23 floors, 400 dwellings per building and different housing layouts—to be evaluated for potential retrofitting at the dwelling level. IBM for massive housing built with IMS construction technology represents an integration of systems’ components into hierarchy assemblies by simple joints. IMS Building Technology by IMS Institute is the system for high-rise structures with prefabricated elements of the skeleton. In order to assess the current situation regarding the selection and implementation of energy savings measures and the role of industrialized technology in supporting the rehabilitation of post-war housing in Belgrade—building configuration model and IMS construction technology has been analyzed, providing in-depth information on the way building components and systems are put together into IBM. In which way retrofit may be approached? IBM is represented with graph model (GM diagram to describe a number of value-added processes according to independent systems/components and flexible connections. This paper highlights the technological aspects of “open” prefabrication industry and building with the systems that should be assessed in the future retrofitting of massive housing based on industrialization and energy efficiency. The paper proposes an IBM that provides concrete description of massive housing buildings, the requirements for information to be provided to approving refurbishment processes. The research also addresses both: challenges as well as opportunities for advancing Building Information Modeling (BIM standards in off-site re-construction of massive housing with new “infill” industry.

  20. Expert systems and computer based industrial systems

    International Nuclear Information System (INIS)

    Dunand, R.

    1989-01-01

    Framentec is the artificial intelligence subsidiary of FRAMATOME. It is involved in expert-system activities of Shells, developments, methodology and software for maintenance (Maintex) and consulting and methodology. Specific applications in the nuclear field are presented. The first is an expert system to assist in the piping support design prototype, the second is an expert system that assists an ultrasonic testing operator in determining the nature of a welding defect and the third is a welding machine diagnosis advisor. Maintex is a software tool to provide assistance in the repair of complex industrial equipment. (author)

  1. Using the social security system to deliver housing policy

    OpenAIRE

    Cheung, Louise, Gee Wing

    2016-01-01

    This thesis examines the interaction between housing policy and the social security benefits that support housing costs. Analysis concerns the extent and type of State intervention in housing, thus explaining the dynamic between State and individual responsibility in housing policy. This thesis involves an exploration of the different treatment of the owner-occupied and the rented housing sectors, with reference to the social security benefits which fund ongoing housing costs. This thesis see...

  2. Innova House - Ottawa`s advanced house

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-31

    A pilot program was developed to provide the housing industry with a means to field test innovative technologies, products and building systems, and to evaluate their overall performance. Under Canada`s Advanced House Program, ten demonstration houses were designed, built and monitored. Ottawa`s Innova House, was one of the ten houses built for this program. The innovative energy saving features of the house included (1) air distribution with small diameter ducts and an electronically commutated motor, a 2.6 kW grid-connected photovoltaic system, (3) an energy recovery ventilator (ERV) with free-cooling mode, (4) a 94 per cent efficient integrated gas heating and hot water system, (5) airtight drywall construction, (6) CFC-free exterior insulation, (7) a natural-gas-engine heat pump for air conditioning, (8) a prototype sealed combustion gas range and clothes dryer, and (9) a manifold plumbing system to conserve water. It was designed to consume one half of the energy consumed in an R-2000 home and one third of the energy of a conventional house. Several of the mechanical elements did not perform at expected levels, (lower than expected efficiencies from the heating and cooling systems and a malfunctioning ERV), nevertheless, overall performance of the house was still very close to the targets. The construction and operation of the house was described. tabs., figs.

  3. Public Attitudes to Housing Systems for Pregnant Pigs.

    Science.gov (United States)

    Ryan, E B; Fraser, D; Weary, D M

    2015-01-01

    Understanding concerns about the welfare of farm animals is important for the development of socially sustainable production practices. This study used an online survey to test how views on group versus stall housing for pregnant sows varied when Canadian and US participants were provided information about these systems, including access to scientific papers, YouTube videos, Google images, and a frequently-asked-questions page (S1 Appendix). Initial responses and changes in responses after accessing the information were analyzed from Likert scores of 242 participants and from their written comments. Participants were less willing to accept the use of gestation stalls after viewing information on sow housing. For example, initially 30.4% of respondents indicated that they supported the use of gestation stalls; this declined to 17.8% after participants were provided additional information. Qualitative analysis of comments showed that supporters of gestation stalls expressed concern about the spread of disease and aggression between animals in less confined systems, whereas supporters of group housing placed more emphasis on the sow's ability to interact socially and perform natural behaviors. These results point to public opposition to the use of gestation stalls, and indicate that the more that the public learns about gestation stalls the less willing they will be to accept their use.

  4. SOLAR ENERGY APPLICATION IN HOUSES HEATING SYSTEMS IN RUSSIA

    Directory of Open Access Journals (Sweden)

    Zhanna Mingaleva

    2017-06-01

    Full Text Available The solar energy is widely used around the world for electricity generation and heating systems in municipal services. But its use is complicated in the number of territories with uneven receipts of solar radiation on the earth’s surface and large number of cloudy days during a year. A hypothesis on the possibility of application of individual solar collectors for heating of houses in the number of cities of Russia has been tested. The existing designs of solar collectors and checking the possibility of their application in northern territories of Russia are investigated. The analysis was carried out taking into account features of relief and other climatic conditions of the Perm and Sverdlovsk regions. As the result of research, the basic recommended conditions for application of solar batteries in houses of the northern Russian cities have been resumed.

  5. Municipal strategies for introducing housing on industrial estates as part of compact-city policies in the Netherlands

    NARCIS (Netherlands)

    Korthals Altes, W.K.; Tambach, M.

    2009-01-01

    Promoting mixed-use development is part of policies aimed at enhancing urban quality. Until recently, however, industry and housing have rarely been found together in the same development as there is a long tradition of keeping these functions separate. As part of a compact-city policy, Dutch local

  6. Systems strategies for developing industrial microbial strains

    DEFF Research Database (Denmark)

    Lee, Sang Yup; Kim, Hyun Uk

    2015-01-01

    Industrial strain development requires system-wide engineering and optimization of cellular metabolism while considering industrially relevant fermentation and recovery processes. It can be conceptualized as several strategies, which may be implemented in an iterative fashion and in different...

  7. Energy house - dream house

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-01

    An energy house a prefabricated house with an extensive minimization of heat losses, is air-conditioned by means of a combined heating system consisting of hot water cycle and recirculating heating. The energy system is trivalent: wind power, solar energy with heat pumps and normal oil heating.

  8. A field study using an adaptive in-house pricing model for commercial and industrial customers in Korea

    International Nuclear Information System (INIS)

    Kim, Min-Jeong

    2017-01-01

    Demand response programs provide customers with economic incentives for load reductions at times of high market prices and system reliability constraints. One type of demand response programs, price-based program, induces customers to respond to changes in product rates. However, some large-scale customers find it difficult to change their electricity consumption patterns, even with rate changes, because their electricity demands are commercial and industrial. This study proposes an adaptive in-house pricing model for large-scale customers, particularly those with multiple business facilities, for self-regulating price-based program. The adaptive in-house pricing model charges higher rates to customers with lower load factors by employing a peak-to-off-peak usage ratio in order to reduce usage at times of high prices at each facility. This study analyzes the daily electricity consumption patterns of large-scale customers through a field trial of the proposed pricing model at a telecom company with 447 offices and worksites for one month. The results show that the pricing model corresponds to average reductions of 3.54–28.69% during peak-demand times for four different types of workplaces. However, reductions in electricity consumption during off-peak periods did not show a significant difference. The results of this study prove that this proposed pricing model can be successfully applied to large-scale operations. - Highlights: • The pricing model induces reductions in energy consumption during peak-demand times. • The greatest decrease occurs in commercial buildings with higher POR. • Data centers with flat loads for necessities can do little to reduce usage.

  9. Authentication System for Electrical Charging of Electrical Vehicles in the Housing Development

    Science.gov (United States)

    Song, Wang-Cheol

    Recently the smart grid has been a hot issue in the research area. The Electric Vehicle (EV) is the most important component in the Smart Grid, having a role of the battery component with high capacity. We have thought how to introduce the EV in the housing development, and for proper operation of the smart grid systems in the housing area the authentication system is essential for the individual houses. We propose an authentication system to discriminate an individual houses, so that the account management component can appropriately operate the electrical charging and billing in the housing estate. The proposed system has an architecture to integrate the charging system outside a house and the monitoring system inside a house.

  10. Effects of housing system on the costs of commercial egg production.

    Science.gov (United States)

    Matthews, W A; Sumner, D A

    2015-03-01

    This article reports the first publicly available egg production costs compared across 3 hen-housing systems. We collected detailed data from 2 flock cycles from a commercial egg farm operating a conventional barn, an aviary, and an enriched colony system at the same location. The farm employed the same operational and accounting procedures for each housing system. Results provide clear evidence that egg production costs are much higher for the aviary system than the other 2 housing systems. Feed costs per dozen eggs are somewhat higher for the aviary and lower for the enriched house compared with the conventional house. Labor costs are much lower for the conventional house than the other 2, and pullet costs are much higher for the aviary. Energy and miscellaneous costs are a minimal part of total operating costs and do not differ by housing system. Total capital investments per hen-capacity are much higher for the aviary and the enriched house. Capital costs per dozen eggs depend on assumptions about appropriate interest and depreciation rates. Using the same 10% rate for each housing system shows capital costs per dozen for the aviary and the enriched housing system are much higher than capital costs per dozen for the conventional house. The aviary has average operating costs (feed, labor, pullet, energy, and miscellaneous costs that recur for each flock and vary with egg production) about 23% higher and average total costs about 36% higher compared with the conventional house. The enriched housing system has average operating costs only about 4% higher compared with the conventional house, but average total costs are 13% higher than for the conventional house. © The Author 2015. Published by Oxford University Press on behalf of Poultry Science Association.

  11. Effects of housing system on the costs of commercial egg production1

    Science.gov (United States)

    Matthews, W. A.; Sumner, D. A.

    2014-01-01

    This article reports the first publicly available egg production costs compared across 3 hen-housing systems. We collected detailed data from 2 flock cycles from a commercial egg farm operating a conventional barn, an aviary, and an enriched colony system at the same location. The farm employed the same operational and accounting procedures for each housing system. Results provide clear evidence that egg production costs are much higher for the aviary system than the other 2 housing systems. Feed costs per dozen eggs are somewhat higher for the aviary and lower for the enriched house compared with the conventional house. Labor costs are much lower for the conventional house than the other 2, and pullet costs are much higher for the aviary. Energy and miscellaneous costs are a minimal part of total operating costs and do not differ by housing system. Total capital investments per hen-capacity are much higher for the aviary and the enriched house. Capital costs per dozen eggs depend on assumptions about appropriate interest and depreciation rates. Using the same 10% rate for each housing system shows capital costs per dozen for the aviary and the enriched housing system are much higher than capital costs per dozen for the conventional house. The aviary has average operating costs (feed, labor, pullet, energy, and miscellaneous costs that recur for each flock and vary with egg production) about 23% higher and average total costs about 36% higher compared with the conventional house. The enriched housing system has average operating costs only about 4% higher compared with the conventional house, but average total costs are 13% higher than for the conventional house. PMID:25480736

  12. Prevalence of lameness and leg lesions of lactating dairy cows housed in southern Brazil: Effects of housing systems.

    Science.gov (United States)

    Costa, Joao H C; Burnett, Tracy A; von Keyserlingk, Marina A G; Hötzel, Maria J

    2018-03-01

    Within the last few decades, the North American and European dairy industries have been collecting information about lameness and leg injury prevalence on dairy farms and have tried to develop solutions to mitigate these ailments. Few published articles report the prevalence of lameness and leg lesions in areas outside of those 2 regions, or how alternative housing systems, such as compost-bedded packs, affect the prevalence of these maladies. The objectives of this study were to compare the prevalence of lameness and leg lesions on confined dairies that used freestall, compost-bedded packs, or a combination of these 2 systems in Brazil. Data were collected in the autumn and winter of 2016 from 50 dairy farms located in Paraná state, including 12 compost-bedded pack dairies (CB), 23 freestall dairies (FS), and 15 freestall dairies that used compost-bedded packs for vulnerable cows (FS+C). A visit to the farm consisted of a management questionnaire, an inspection of the housing areas as well as the milking parlor, and an evaluation of all lactating cows as they exited the parlor for lameness (score 1-5), hygiene (score 0-2), body condition score (score 1-5), and hock and knee lesions (score 0-1). Median 1-way chi-squared test was used to compare production systems. We found no difference between farm types in management practices related to hoof health management or average daily milk production per cow [31 (29-33.9) kg/d; median (quartile 1-3)], percentage of Holstein cattle in the herd [100% (90-100%)], conception rate [35.8% (30.2-38%)], or pregnancy rate [15% (13.7-18%)]. The CB farms were smaller [85 (49.5-146.5) milking cows] than both the FS [270 (178-327.5) milking cows] and FS+C farms [360 (150-541.5) milking cows). The overall prevalence of severe lameness (score 4 and 5) across all farms was 21.2% (15.2-28.5%) but was lower on the CB farms [14.2% (8.45-15.5%)] in comparison to the FS [22.2% (16.8-26.7%)] and the FS+C farms [22.2% (17.4-32.8%)]. Less than

  13. Construction Costs Assessment of Structural Systems for Low-Rise and Social Welfare Housing

    Directory of Open Access Journals (Sweden)

    Carrillo Julián

    2015-09-01

    Full Text Available A comparative analysis of the costs related to the construction of low-rise, low-cost and social welfare housing was carried out. The study included three of the most commonly used structural systems for low-rise housing in Latin America, such as the traditional system of confined masonry walls, concrete walls conventionally reinforced with welded-wire meshes and concrete walls reinforced with steel fiber. The cost comparison was carried out by budgets analysis, which were performed based on construction quantities, unit prices and particular items for each structural system. It was found in the study that, from an economic point of view, the systems of concrete walls reinforced with welded-wire meshes or steel fibers are more advantageous than confined masonry systems. In addition, the integral comparison of the three structural systems demonstrates that the industrialized system of steel fiber reinforced concrete walls allows obtaining greater advantages of cleaning and sustainability, faster construction, lower cost and a more attractive scenario for builders investing in such projects.

  14. The basic construction materials industry and today’s vast housing shortage

    Directory of Open Access Journals (Sweden)

    Oteiza, I.

    2008-12-01

    Full Text Available This paper documents some of the aspects of the major challenge facing world-wide building: humanity's daunting shortage of basic housing, monographically focusing on what this means for the basic building materials industry. These needs have created the greatest demand ever for ex-novo solutions and an exponential increase in slum rehabilitation and improvement, translated here into the need for construction materials and more specifically, cement, as the emblematic component of buildings.El trabajo aborda en forma documentada, algunos aspectos del mayor de los retos que tiene planteado a nivel cosmopolita el sector de la edificación: las ingentes necesidades de habitabilidad básica que padece la humanidad, centrándose en forma monográfica en lo que ello supone para la industria de materiales básicos de edificación. Necesidades que se traducen en la mayor demanda histórica de soluciones ex-novo y en el aumento exponencial de rehabilitación y mejora de tugurios, que los autores traducen en necesidades de materiales de construcción, y de forma más concreta, de cemento, como material emblemático de la edificación.El trabajo, mediante el análisis de casos, muestra la muy diferente repercusión que tienen los materiales sobre los presupuestos finales de lo ejecutado, según se trate del mundo desarrollado (MD o de países en vías de desarrollo (PVD. Por otra parte, estudia la incidencia general del sector 'informal' de la construcción, concluyendo que éste, en muchos países, es el consumidor mayoritario de materiales -specialmente cemento-y que a nivel mundial los PVD lo son tanto en producción como en consumo.

  15. Redistribution, Growth, and Inclusion : The Development of the Urban Housing System in China, 1949-2015

    NARCIS (Netherlands)

    Deng, W.; Hoekstra, J.S.C.M.; Elsinga, M.G.

    2017-01-01

    This paper explains the development of the urban housing system in China from 1949 to 2011 with an emphasis on the factors driving housing inequality in each policy period. We argue that the logic underpinning the housing policy had shifted from socialist redistribution to the stimulation of growth

  16. Hybrid Membrane System for Industrial Water Reuse

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-08-01

    This factsheet describes a project that developed and demonstrated a new hybrid system for industrial wastewater treatment that synergistically combines a forward osmosis system with a membrane distillation technology and is powered by waste heat.

  17. Housing Development Building Management System (HDBMS For Optimized Electricity Bills

    Directory of Open Access Journals (Sweden)

    Weixian Li

    2017-08-01

    Full Text Available Smart Buildings is a modern building that allows residents to have sustainable comfort with high efficiency of electricity usage. These objectives could be achieved by applying appropriate, capable optimization algorithms and techniques. This paper presents a Housing Development Building Management System (HDBMS strategy inspired by Building Energy Management System (BEMS concept that will integrate with smart buildings using Supply Side Management (SSM and Demand Side Management (DSM System. HDBMS is a Multi-Agent System (MAS based decentralized decision making system proposed by various authors. MAS based HDBMS was created using JAVA on a IEEE FIPA compliant multi-agent platform named JADE. It allows agents to communicate, interact and negotiate with energy supply and demand of the smart buildings to provide the optimal energy usage and minimal electricity costs.  This results in reducing the load of the power distribution system in smart buildings which simulation studies has shown the potential of proposed HDBMS strategy to provide the optimal solution for smart building energy management.

  18. Metrological Array of Cyber-Physical Systems. Part 3. Smart Energy-Efficient House

    Directory of Open Access Journals (Sweden)

    Ihor HNES

    2015-04-01

    Full Text Available Smart energy-efficient houses as the components of Cyber-Physical Systems are developed intensively. The main stream of progress consists in the research of Smart houses’ energy supply. By this option the mentioned objects are advancing from passive houses through net-zero energy houses to active houses that are capable of sharing their own accumulated energy with other components of Cyber-Physical Systems. We consider the problems of studying the metrology models and measuring the heat dissipation in such houses trying to apply network and software achievements as well as the new types of devices with improved characteristics.

  19. DESIGN AND MANUFACTURING OF MODULAR PARQUET FLOORING IN INDUSTRIAL SYSTEM

    Directory of Open Access Journals (Sweden)

    Ivan CISMARU

    2014-09-01

    Full Text Available The paper submits constructive options and methods to design and manufacture modular parquet flooring, as well as fastening methods in constructions. Likewise, it presents the branches of civil engineering where modular parquet flooring may be turned to profit – industrial buildings, company premises or residential premises. The turn towards the achievement of private constructions, such as individual houses, led to losing control of the modular system applied in defining the inner sizes of the constructions and implicitly to the apparition of dimensional incompatibilities between the parquet flooring and the built spaces. The paper sets out (to solve by an individualized design procedure to achieve modular parquet flooring in industrial system, in correspondence with the sizes of the inner spaces afferent to the constructions.

  20. Post-Socialist Housing Systems in Europe: Housing Welfare Regimes by Default?

    Czech Academy of Sciences Publication Activity Database

    Stephens, M.; Lux, Martin; Sunega, Petr

    2015-01-01

    Roč. 30, č. 8 (2015), s. 1210-1234 ISSN 0267-3037 R&D Projects: GA ČR(CZ) GAP404/12/1446 Institutional support: RVO:68378025 Keywords : Welfare regimes * financialisation * housing policy Subject RIV: AO - Sociology, Demography Impact factor: 1.309, year: 2015 http://dx.doi.org/10.1080/02673037.2015.1013090

  1. Carbon Reduction Measures-Based LCA of Prefabricated Temporary Housing with Renewable Energy Systems

    Directory of Open Access Journals (Sweden)

    Ling Dong

    2018-03-01

    Full Text Available Temporary housing plays an important role in providing secure, hygienic, private, and comfortable shelter in the aftermath of disaster (such as flood, fire, earthquake, etc.. Additionally, temporary housing can also be used as a sustainable form of on-site residences for construction workers. While most of the building components used in temporary housing can be manufactured in a plant, prefabrication technology improves the production efficiency of temporary housing; furthermore, integrated renewable energy systems, for example, solar photovoltaic (PV system, offer benefits for temporary housing operations. In order to assess the environmental impacts of prefabricated temporary housing equipped with renewable energy systems, this study first divides the life cycle of temporary housing into six stages, and then establishes a life cycle assessment (LCA model for each stage. Furthermore, with the aim of reducing the environmental impacts, life cycle carbon reduction measures are proposed for each stage of temporary housing. The proposed methodology is demonstrated using a case study in China. Based on the proposed carbon reduction measures, the LCA of a prefabricated temporary housing case study building equipped with renewable energy systems indicates a carbon emissions intensity of 35.7 kg/m2·per year, as well as a reduction in material embodied emissions of 18%, assembly emissions of 17.5%, and operational emissions of 91.5%. This research proposes a carbon reduction-driven LCA of temporary housing and contributes to promoting sustainable development of prefabricated temporary housing equipped with renewable energy systems.

  2. Thermodynamical double-flux ventilation system in individual house; Systeme de ventilation double flux thermodynamique en maison individuelle

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This guidebook written by the French scientific and technical committee of the space heating, ventilation and air-conditioning industry (Costic) with the collaboration of the French association of coldness production engineering (AFF) and Electricite de France (EdF), presents the technical rules and practical advices for the installation of thermodynamical double-flux ventilation systems in residential houses. Content: heat pumps (standardization and regulation, choice and dimensioning of the auxiliary electrical supply, installation, acoustic precautions), aeraulic networks (standardization and regulation, choice and dimensioning, installation), thermal insulation, thermoregulation, control and start-up, maintenance. (J.S.)

  3. ENVIRONMENT DEGRADATION BASIS FOR INDUSTRIAL SYSTEMS RENGINEERING

    Directory of Open Access Journals (Sweden)

    Rade Milićević

    2007-06-01

    Full Text Available Presently, the most environmental pressure in Serbia comes from urban areas and associated industries,with collection, treatment and disposal all kinds of hazardous waste, non hazardous waste, and waste water being among the most challenging issues.There is an urgency to prevent further environmental degradation and to initiate new environmental and industrial management practices. Industrial systems reingeneering is one of possible solutions, from the authors stand point.

  4. Vision Systems Illuminate Industrial Processes

    Science.gov (United States)

    2013-01-01

    When NASA designs a spacecraft to undertake a new mission, innovation does not stop after the design phase. In many cases, these spacecraft are firsts of their kind, requiring not only remarkable imagination and expertise in their conception but new technologies and methods for their manufacture. In the realm of manufacturing, NASA has from necessity worked on the cutting-edge, seeking new techniques and materials for creating unprecedented structures, as well as capabilities for reducing the cost and increasing the efficiency of existing manufacturing technologies. From friction stir welding enhancements (Spinoff 2009) to thermoset composites (Spinoff 2011), NASA s innovations in manufacturing have often transferred to the public in ways that enable the expansion of the Nation s industrial productivity. NASA has long pursued ways of improving upon and ensuring quality results from manufacturing processes ranging from arc welding to thermal coating applications. But many of these processes generate blinding light (hence the need for special eyewear during welding) that obscures the process while it is happening, making it difficult to monitor and evaluate. In the 1980s, NASA partnered with a company to develop technology to address this issue. Today, that collaboration has spawned multiple commercial products that not only support effective manufacturing for private industry but also may support NASA in the use of an exciting, rapidly growing field of manufacturing ideal for long-duration space missions.

  5. Industrial system for producing iodine-123

    International Nuclear Information System (INIS)

    Brantley, J.C.

    1985-01-01

    An industrial system to produce iodine-123 required a complex set of steps involving new approaches by the Food and Drug Administration, difficult distribution procedures, and evidence from potential users that either very pure iodine-123 or inexpensive iodine-123 is needed. Industry has shown its willingness to invest in new radionuclides but needs strong evidence as to product potential to justify those investments

  6. IT Security Aspects of Industrial Control Systems

    Directory of Open Access Journals (Sweden)

    Peter Holecko

    2006-01-01

    Full Text Available This paper discusses a set of general network system architectures for industrial process control systems as well as vulnerabilities related to these systems and the IT threats these systems are exposed to from the point of view of Common Criteria methodology and ITU-T recommendation X.805.

  7. Testing of modular industrial solar retrofit industrial process steam systems

    Energy Technology Data Exchange (ETDEWEB)

    Cameron, C.P.; Dudley, V.E.

    1984-06-13

    Under the Department of Energy's Modular Industrial Solar Retrofit project, five industrial process heat systems incorporating line-focus solar collectors were designed and hardware was installed and tested at Sandia National Laboratories and the Solar Energy Research Institute. System designers and collector manufacturers participating in the project included Acurex Solar Corporation, BDM, Inc., Custom Engineering, Inc., Foster Wheeler Solar Development Corporation, Solar Kinetics, Inc., and Suntec Systems, Inc. This paper describes the testing of the qualification test systems which has been under way since mid-1982. Each qualification test system includes an equipment skid sufficient to support a collector field of 2300 m/sup 2/ aperture and one delta-tempeature string of from 175 to 460 m/sup 2/ aperture. Each system is capable of producing saturated steam at 1.7 MPa and operates at maximum outlet temperatures of from 250 to 290/sup 0/C. The test series includes function and safety tests to determine that the systems operate as specified, an unattended operation test of at least two weeks duration, performance tests to allow prediction of annual system performance, and life cycle tests to evaluate component lifetime and maintenance requirements. Since the start of testing, some twenty five modifications have been made to the various systems for the purpose of improving system performance and/or reliability, and appropriate tests of these modifictions have been made or are underway. This paper presents a description of the approach to testing of the MISR systems and selected test results.

  8. Autonomous houses. Autonomous house

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, S. (Tokai University, Tokyo (Japan). Faculty of Engineering)

    1991-09-30

    Self-sufficiency type houses are outlined. On condition that people gain a certain amount of income in relation with the society, they self-suffice under the given environment, allowing themselves to accept a minimum of industrial products with small environmental load. Ordinary supply from outside of fossil energy and materials which depend on it is minimized. Types are classified into three: energy, energy materials and perfect self-sufficiency. A study project for environment symbiotic houses is progressing which is planned by the Ministry of Construction and Institute of Building Energy Conservation and is invested by a private company. Its target is making a house for halving an environmental load by CO{sub 2}, for the purpose of creating the environment symbiotic house which is nice to and in harmony with the global environment and human beings. As a part of the studies on energy-saving and resource conservation on houses, introduced is a plan of an autonomous house at Izu-Atagawa. The passive method and high thermal-insulation are used for air conditioning, and hot spring water for hot water supply. Electric power is generated by hydroelectric power generation using mountain streams and by solar cells. Staple food is purchased, while subsidiary food is sufficed. 17 refs., 4 figs., 1 tab.

  9. Quality Systems Implementation in the Pharmaceutical Industry

    African Journals Online (AJOL)

    Nafiisah

    quality standards imposed on local pharmaceutical manufacturers. Keywords: Quality/ .... GMP is concerned with both production and quality control. It is aimed ... in the European pharmaceutical industry in designing their quality systems:.

  10. Chapter 13. Industrial Application of Tap Water Hydraulic Systems

    DEFF Research Database (Denmark)

    Conrad, Finn; Adelstorp, Anders

    1997-01-01

    Design and application of modern pure tap water components and systems in industries, in particular food processing industry.......Design and application of modern pure tap water components and systems in industries, in particular food processing industry....

  11. A Road Map for Success: How Northwest Manufactured Housing Conservation Efforts Revolutionized an Industry.

    Energy Technology Data Exchange (ETDEWEB)

    Gilbertson, William L.

    1993-04-01

    The evolution of an ongoing Bonneville Power Administration effort to improve the energy efficiency of manufactured homes is chronicled in this informal history. Over the past nine years, Bonneville`s manufactured housing project has undertaken many activities, including technical studies, cooperative ventures, design studies, and information dissemination. These activities are covered.

  12. Possible Regulatory Improvements of the American Housing Finance System

    DEFF Research Database (Denmark)

    Lunde, Jens

    2018-01-01

    Book review of: Susan M. Wachter and Joseph Tracy (eds.): Principles of Housing Finance Reform. PENN—University of Pennsylvania Press, Philadelphia, 282 pp, $65.00s, ISBN: 978-0-8122-4862-3......Book review of: Susan M. Wachter and Joseph Tracy (eds.): Principles of Housing Finance Reform. PENN—University of Pennsylvania Press, Philadelphia, 282 pp, $65.00s, ISBN: 978-0-8122-4862-3...

  13. 76 FR 10050 - Changes to the Public Housing Assessment System (PHAS): Management Operations Scoring Notice

    Science.gov (United States)

    2011-02-23

    ... Housing Assessment System (PHAS): Management Operations Scoring Notice SUMMARY: This notice provides... issuing scores under the management operations indicator of the Public Housing Assessment System (PHAS... notice is to provide additional information about the scoring process for the PHAS management operations...

  14. 76 FR 10047 - Changes to the Public Housing Assessment System (PHAS): Financial Condition Scoring Notice

    Science.gov (United States)

    2011-02-23

    ... accepted accounting principles (GAAP)-based financial information. This notice updates and clarifies the... Housing Assessment System (PHAS): Financial Condition Scoring Notice AGENCY: Office of the Assistant... under the financial condition indicator of the Public Housing Assessment System (PHAS). This notice...

  15. Ammonia emission from aviary housing systems for laying hens : inventory, characteristics and solutions

    NARCIS (Netherlands)

    Groot Koerkamp, P.W.G.

    1998-01-01

    The development and practical application of welfare friendly aviary housing systems for laying hens, that generally emit more ammonia per hen than battery cage housing systems, would conflict with the Dutch policy to substantially reduce the total emission of ammonia from animal

  16. White House Communications Agency (WHCA) Presidential Voice Communications Rack Mount System Mechanical Drawing Package

    Science.gov (United States)

    2015-12-01

    Rack Mount System Mechanical Drawing Package by Steven P Callaway Approved for public release; distribution unlimited...Laboratory White House Communications Agency (WHCA) Presidential Voice Communications Rack Mount System Mechanical Drawing Package by Steven P...Note 3. DATES COVERED (From - To) 04/2013 4. TITLE AND SUBTITLE White House Communications Agency (WHCA) Presidential Voice Communications Rack

  17. A review of sow and piglet behaviour and performance in group housing systems for lactating sows

    NARCIS (Netherlands)

    Nieuwamerongen, van S.E.; Bolhuis, J.E.; Peet-Schwering, van der C.M.C.; Soede, N.M.

    2014-01-01

    Commercial use of group housing systems for lactating sows is limited, but the recent transition to group housing during gestation in the EU may result in a renewed interest in such systems. Therefore, this review aims to identify key factors that may contribute to the success or failure of group

  18. New industrialised housing model for young starters in Malaysia : Identifying problems for the formulation of a new business model for the housing industry

    NARCIS (Netherlands)

    Wamelink, J.W.F.; Gruis, V.; John, L.H.; Zairul, M.N.

    2015-01-01

    Young people are currently facing a considerable risk when it comes to increasing house prices and interest rates as a substantial portion of their monthly income. This is due to the fact that they now have a responsibility in making monthly repayments of their housing loans. The current housing

  19. Effects of housing system and age of laying hens on egg performance in fresh pasta production: pasta cooking behaviour.

    Science.gov (United States)

    Alamprese, Cristina; Casiraghi, Ernestina; Rossi, Margherita

    2011-03-30

    Very few studies concern the effects of layer housing systems and age on egg technological properties. Thus the aim of this work was to study the influence of these two factors on egg performance in fresh pasta production, focusing on pasta cooking behaviour. Samples of pasta subjected to analysis were prepared with eggs laid by Hy-Line Brown hens (from 27 to 68 weeks old) housed in cage, barn and organic systems. Higher average values of weight increase and matter loss during pasta cooking were observed for samples prepared with eggs laid by older hens. Such cooking behaviour indicated the development of a weaker pasta protein network, resulting from a decrease in the quantity of albumen protein and an increase in fat content, which is due to the reduction in albumen/yolk ratio during hen aging. The housing system had a significant effect only on matter loss in cooking water, but differences between samples were so small as to be unlikely perceived by consumers. Both hen age and housing system significantly affected pasta cooking behaviour, but the greatest effect was exerted by the hen age. Copyright © 2010 Society of Chemical Industry.

  20. A livability rating system of a high-rise housing and its computer simulation

    Science.gov (United States)

    Liu, Zhengrui

    2017-09-01

    Aiming at the problems in housing choosing and purchasing in the high-rise residential buildings, this paper considers the factors that affect various livable degrees and analyzes the important degrees of the factors through the Analytic Hierarchy Process (AHP), quantifying the various factors by 10 point scoring system. Accordingly, this paper puts forward a habitable housing index, validating the correctness of the indicators by simulating the process of housing choosing through computer program.

  1. Redevelopment of Industrial Heritage: Insights into External Effects on House Prices

    NARCIS (Netherlands)

    van Duijn, Mark; Rouwendal, Jan; Boersema, Richard

    Local policy makers seek ways to deal with abandoned industrial heritage in their jurisdictions. Many are demolished, but in some cases considerable investments are made to preserve the cultural aspects of industrial sites. The renewal plans are usually designed to stimulate urban renewal in the

  2. Transformations of industrial heritage : Insights into external effects on house prices

    NARCIS (Netherlands)

    van Duijn, Mark; Rouwendal, Jan; Boersema, Richard

    2014-01-01

    Local policy makers seek ways to deal with abandoned industrial heritage in their jurisdictions. Much is demolished, but in some cases considerable investments are made to preserve the cultural aspects of industrial sites. The renewal plans are usually designed to stimulate urban renewal in the

  3. Industrial deployment of system engineering methods

    CERN Document Server

    Romanovsky, Alexander

    2013-01-01

    A formal method is not the main engine of a development process, its contribution is to improve system dependability by motivating formalisation where useful. This book summarizes the results of the DEPLOY research project on engineering methods for dependable systems through the industrial deployment of formal methods in software development. The applications considered were in automotive, aerospace, railway, and enterprise information systems, and microprocessor design.  The project introduced a formal method, Event-B, into several industrial organisations and built on the lessons learned to

  4. Passive annual heat storage principles in earth sheltered housing, a supplementary energy saving system in residential housing

    Energy Technology Data Exchange (ETDEWEB)

    Anselm, Akubue Jideofor [Green Architecture Department, School of Architecture and Urban Planning, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2008-07-01

    This paper looks through the many benefits of earth not only as a building element in its natural form but as a building mass, energy pack and spatial enclosure which characterized by location, unique physical terrain and climatic factors can be utilized in developing housing units that will provide the needed benefits of comfort alongside the seasons. Firstly the study identifies existing sunken earth houses in the North-west of China together with identifying the characters that formed the ideas behind the choice of going below the ground. Secondly, the study examines the pattern of heat exchange, heat gains and losses as to identify the principles that makes building in earth significant as an energy conservation system. The objective of this, is to relate the ideas of sunken earth home design with such principles as the passive annual heat storage systems (PAHS) in producing houses that will serve as units used to collect free solar heat all summer and cools passively while heating the earth around it and also keeping warm in winter by retrieving heat from the soil while utilizing the free solar heat stored throughout the summer as a year-round natural thermal resource. (author)

  5. Aspergilli: Systems biology and industrial applications

    DEFF Research Database (Denmark)

    Knuf, Christoph; Nielsen, Jens

    2012-01-01

    possible to implement systems biology tools to advance metabolic engineering. These tools include genome-wide transcription analysis and genome-scale metabolic models. Herein, we review achievements in the field and highlight the impact of Aspergillus systems biology on industrial biotechnology....

  6. Toward High Performance in Industrial Refrigeration Systems

    DEFF Research Database (Denmark)

    Thybo, C.; Izadi-Zamanabadi, Roozbeh; Niemann, H.

    2002-01-01

    Achieving high performance in complex industrial systems requires information manipulation at different system levels. The paper shows how different models of same subsystems, but using different quality of information/data, are used for fault diagnosis as well as robust control design...

  7. Towards high performance in industrial refrigeration systems

    DEFF Research Database (Denmark)

    Thybo, C.; Izadi-Zamanabadi, R.; Niemann, Hans Henrik

    2002-01-01

    Achieving high performance in complex industrial systems requires information manipulation at different system levels. The paper shows how different models of same subsystems, but using different quality of information/data, are used for fault diagnosis as well as robust control design...

  8. Training Center for Industrial Control Systems

    Directory of Open Access Journals (Sweden)

    V. D. Yezhov

    2013-01-01

    Full Text Available We consider the application of embedded microcontrollers and industrial controllers with built-in operating systems.With the development of embedded operating systems and technology of open standard IEC 61131-3 product developer can write their own program management and support staff – to modernize management program.

  9. Obstacles to Industrial Implementation of Scanning Systems

    Science.gov (United States)

    Anders Astrom; Olog Broman; John Graffman; Anders Gronlund; Armas Jappinene; Jari Luostarinen; Jan Nystrom; Daniel L. Schmoldt

    1998-01-01

    Initially the group discussed what is meant by scanning systems. An operational definition was adopted to consider scanning system in the current context to be nontraditional scanning. Where, traditional scanning is defined as scanning that has been industrially operational and relatively common for several years-a mature technology. For example,...

  10. 75 FR 39036 - Public Housing Assessment System (PHAS): Management Operations Certification

    Science.gov (United States)

    2010-07-07

    ... System (PHAS): Management Operations Certification AGENCY: Office of the Chief Information Officer, HUD... management operations. The information is used to assess the management performance of PHAs. DATES: Comments... following information: Title of Proposal: Public Housing Assessment System (PHAS): Management Operations...

  11. Solar heating systems for houses. A design handbook for solar combisystems

    International Nuclear Information System (INIS)

    Weiss, W.

    2003-11-01

    A handbook giving guidance on systems for providing combined solar space heating and solar water heating for houses has been produced by an international team. The guidance focuses on selection of the optimum combi-system for groups of single-family houses and multi-family houses. Standard classification and evaluation procedures are described. The book should be a valuable tool for building engineers, architects, solar manufacturers and installers of solar solar energy systems, and anyone interested in optimizing combined water and space heating solar systems

  12. Industrial Foundations in the Tax System

    DEFF Research Database (Denmark)

    Nielsen, Søren Bo

    This paper attempts to place industrial foundations (IFs in the following; similar to trusts) in the tax system. An industrial foundation is a private foundation that holds a voting majority in a joint stock corporation. These IFs are probably more prevalent in Denmark than in any other country......? The paper explores the implications of treating IFs as high‐income earners (wealthy individuals) and draws the conclusion that in the current system, IFs are very leniently taxed relative to that benchmark. Lenient tax treatment relative to the norm is regularly interpreted as tax expenditures; the usual...

  13. Housing system transformations in Japan and South Korea: divergent responses to neo-liberal forces

    NARCIS (Netherlands)

    Ronald, R.; Kyung, S.

    2013-01-01

    Despite different pathways and approaches to housing and public provision, considerations of East Asian developmental regimes have tended to categorise Japan and South Korea as different versions of a similar type of welfare regime. This paper addresses the roles housing systems and policies have

  14. Application of Agent-based Modelling for Estimation of Norm-based Dynamics of Housing Systems.

    Czech Academy of Sciences Publication Activity Database

    Lux, Martin; Hájek, Martin; Kážmér, Ladislav

    2017-01-01

    Roč. 34, č. 4 (2017), s. 379-398 ISSN 1403-6096 R&D Projects: GA ČR GA16-06335S Institutional support: RVO:68378025 Keywords : housing market * social norms * housing system Subject RIV: AO - Sociology, Demography OBOR OECD: Sociology Impact factor: 1.000, year: 2016

  15. Specific characteristics of the aviary housing system affect plumage condition, mortality and production in laying hens

    NARCIS (Netherlands)

    Heerkens, J.L.T.; Delezie, Evelyne; Kempen, Ine; Zoons, Johan; Ampe, Bart; Rodenburg, T.B.; Tuyttens, F.A.M.

    2015-01-01

    Feather pecking and high mortality levels are significant welfare problems in non-cage housing systems for laying hens. The aim of this study was to identify husbandry-related risk factors for feather damage, mortality, and egg laying performance in laying hens housed in the multi-tier non-cage

  16. 75 FR 21146 - Public Input on Reform of the Housing Finance System

    Science.gov (United States)

    2010-04-22

    ...Consistent with the Obama Administration's commitment to openness and transparency and the President's Open Government Initiative, the Department of the Treasury (Treasury) and the Department of Housing and Urban Development (HUD) seek public input on establishing a more stable and sound housing finance system.

  17. Industrial biosystems engineering and biorefinery systems.

    Science.gov (United States)

    Chen, Shulin

    2008-06-01

    The concept of Industrial Biosystems Engineering (IBsE) was suggested as a new engineering branch to be developed for meeting the needs for science, technology and professionals by the upcoming bioeconomy. With emphasis on systems, IBsE builds upon the interfaces between systems biology, bioprocessing, and systems engineering. This paper discussed the background, the suggested definition, the theoretical framework and methodologies of this new discipline as well as its challenges and future development.

  18. Development of an air heating system for single family housing

    DEFF Research Database (Denmark)

    Afshari, Alireza; Gunner, Amalie; Nikolaisen, Christian Grønborg

    2017-01-01

    The initial objective of the project was to break with common thinking about Space heating and to document that air heating can be used as the sole source of heating in a single Family house. The basic idea is that the ventilation must be installed in any case and it may equally well form the heat...

  19. Characteristic aspects of the housing and utilitiescomplex as a difficult organizational and economic system

    Directory of Open Access Journals (Sweden)

    Butyrin Andrey Yur'evich

    2014-02-01

    Full Text Available The existing system of housing and utility services functioning is carried out for providing the relevant living environment standards to the population by means of effective functioning of the system of uninterrupted providing housing and utility services according to existing requirements of the Russian standards. Today there is a number of problems, which doesn't allow housing and utility services to function effectively. The main of them is providing high-quality housing and utility services to the population and system of their objective cost assessment. This problem is solved by means of reforming the housing and utility sphere with the possibility of attracting financial resources from private investors. Housing and Utility of the Russian Federation, the basis of which is the housing stock, has a very high specific weight in fixed assets of all the economy.Thus, Housing and Utility is a typical difficult organizational and economic system possessing characteristic features of openness, nonlinearity and dissipativity. In this re-gard, the reasonable approach to Housing and Utility development assumes the need to account for the principles of systemacity, focus and complexity, and also can be based on the existing in the theory and practice of management methodology by difficult organizational and economic systems.Now Housing and Utility development and financing investment programs of the municipal complex organizations is carried out according to the relevant Federal law, according to which the establishment system of limit indexes of change of tariffs and investment extra charges to tariffs for services of the organizations of a municipal complex. Also, innovative ways of energy efficiency increase and decrease in wear of funds is an attempt of the state to develop effective mechanisms of attracting private funds from investors.

  20. Industrial Irradiation of Polymers: Systems and Concepts

    International Nuclear Information System (INIS)

    Mittendorfer, J.

    2006-01-01

    This paper provides a systematic survey of systems and concepts used in the industrial irradiation of polymers. It consists basically of three parts: in the first part, different types of applications like wires and cables, pipes and engineering plastics are discussed and the associated irradiation systems analyzed and highlighted according their basics modules. These are identified as the radiation source, the product handling system, process control and facility/shielding layout. In the second part, the irradiation process design is reviewed in detail. The discussion starts with the requirement analysis, e.g. the desired polymer parameters and effects, continues with a process development roadmap and concludes with process verification and validation. Special attention is drawn to process control, which plays an important role in industrial irradiation technology. The use of mathematical modeling to facilitate and support process and system design is discussed as well and several examples are given which demonstrate their capabilities. In the third part, the design of a electron beam facility for the irradiation of small plastic parts for the automotive industry is worked out in detail. Besides system and product handling considerations, throughput and economical estimates are provided. The paper concludes with a summary of the design and concept bullets which proved to be important in history and can facilitate new developments which will enhance the potential of industrial polymer irradiation

  1. System approach to modeling of industrial technologies

    Science.gov (United States)

    Toropov, V. S.; Toropov, E. S.

    2018-03-01

    The authors presented a system of methods for modeling and improving industrial technologies. The system consists of information and software. The information part is structured information about industrial technologies. The structure has its template. The template has several essential categories used to improve the technological process and eliminate weaknesses in the process chain. The base category is the physical effect that takes place when the technical process proceeds. The programming part of the system can apply various methods of creative search to the content stored in the information part of the system. These methods pay particular attention to energy transformations in the technological process. The system application will allow us to systematize the approach to improving technologies and obtaining new technical solutions.

  2. Laboratory use of industrial control systems

    International Nuclear Information System (INIS)

    Rijllart, A.; Avot, L.; Brahy, D.; Jegou, D.; Saban, R.

    1994-01-01

    Industrial control system manufacturers supply the building blocks for the control of industrial equipment or specific process control applications. Although the laboratory environment is different in many aspects (prototyping, evolution and frequent reconfiguration), the use of these building blocks remain attractive because of their general purpose nature, their cost and the large spectrum of available types. In this paper we present three projects which have been implemented using both industrial control system building blocks (PLCs, controllers, digital and analogue plug-in I/O cards) and commercial software packages (LabView and VisualBasic) for the man-machine interface, the data acquisition and archiving, and the process control. This approach has proved to be economical, easy and fast to implement. ((orig.))

  3. Systems metabolic engineering in an industrial setting.

    Science.gov (United States)

    Sagt, Cees M J

    2013-03-01

    Systems metabolic engineering is based on systems biology, synthetic biology, and evolutionary engineering and is now also applied in industry. Industrial use of systems metabolic engineering focuses on strain and process optimization. Since ambitious yields, titers, productivities, and low costs are key in an industrial setting, the use of effective and robust methods in systems metabolic engineering is becoming very important. Major improvements in the field of proteomics and metabolomics have been crucial in the development of genome-wide approaches in strain and process development. This is accompanied by a rapid increase in DNA sequencing and synthesis capacity. These developments enable the use of systems metabolic engineering in an industrial setting. Industrial systems metabolic engineering can be defined as the combined use of genome-wide genomics, transcriptomics, proteomics, and metabolomics to modify strains or processes. This approach has become very common since the technology for generating large data sets of all levels of the cellular processes has developed quite fast into robust, reliable, and affordable methods. The main challenge and scope of this mini review is how to translate these large data sets in relevant biological leads which can be tested for strain or process improvements. Experimental setup, heterogeneity of the culture, and sample pretreatment are important issues which are easily underrated. In addition, the process of structuring, filtering, and visualization of data is important, but also, the availability of a genetic toolbox and equipment for medium/high-throughput fermentation is a key success factor. For an efficient bioprocess, all the different components in this process have to work together. Therefore, mutual tuning of these components is an important strategy.

  4. Comparison of vibration damping of standard and PDCPD housing of the electric power steering system

    Science.gov (United States)

    Płaczek, M.; Wróbel, A.; Baier, A.

    2017-08-01

    A comparison of two different types of electric power steering system housing is presented. The first considered type of the housing was a standard one that is made of an aluminium alloy. The second one is made of polydicyclopentadiene polymer (PDCPD) and was produced using the RIM technology. Considered elements were analysed in order to verify their properties of vibrations damping. This property is very important taking into account noise generated by elements of a car’s power steering system. During the carried out tests vibrations of analysed power steering housings were measured using Marco Fiber Composite (MFC) piezoelectric transducers. Results obtained for both considered power steering housings in case of the same parameters of vibrations excitations were measured and juxtaposed. Obtained results were analysed in order to verify if the housing made of PDCPD polymer has better properties of vibration damping than the standard one.

  5. Cyber Security of Industrial Control Systems

    NARCIS (Netherlands)

    Luiijf, H.A.M.; Paske, B.J. te

    2015-01-01

    Our society and its citizens depend on the undisturbed functioning of (critical) infrastructures and their services. Crucial processes in most critical infrastructures, and in many other organisations, rely on the correct and undisturbed functioning of Industrial Control Systems (ICS). A failure of

  6. Indoor radon in three similar two-story houses with different ventilation systems

    International Nuclear Information System (INIS)

    Kokotti, H.; Savolainen, T.; Raunemaa, T.; Kalliokoski, P.

    1989-01-01

    Radon levels were monitored in three similar two-story apartment houses which were located side by side on a gravel esker in eastern Finland. The houses differed only in regard to their ventilation systems which included the following: natural ventilation, mechanical exhaust, and complete mechanical ventilation. The study started immediately when the houses were finished and was continued for two years. Radon concentrations were highest (60-430 Bq/m 3 ) in the beginning of the study period before the tenants moved in. During the following spring and fall, average radon levels of the houses decreased below 100 Bq/m 3 . Radon concentrations varied within a wide range, from 20 to 230 Bq/m 3 , in the apartments. Among the houses, the highest concentrations were found in the house equipped with mechanical exhaust ventilation and the lowest in the house with both a mechanical supply and exhaust system. One reason for the decreasing levels of radon after a one-year occupancy was that the tenants increased the ventilation of their apartments. In the house with complete mechanical ventilation, the stability of ventilation also contributed to the decrease of the indoor radon level

  7. Upgrade energy building standards and develop rating system for existing low-income housing

    International Nuclear Information System (INIS)

    Muller, D.; Norville, C.

    1993-07-01

    The city of Memphis Division of Housing and Community Development (HCD) receives grant funding each year from the U.S. Department of Housing and Urban Development (HUD) to provide local housing assistance to low-income residents. Through the years, HCD has found that many of the program recipients have had difficulty in managing their households, particularly in meeting monthly financial obligations. One of the major operating costs to low-income households is the utility bill. Furthermore, HCD's experience has revealed that many low-income residents are simply unaware of ways to reduce their utility bill. Most of the HCD funds are distributed to low-income persons as grants or no/low interest loans for the construction or rehabilitation of single-family dwellings. With these funds, HCD builds 80 to 100 new houses and renovates about 500 homes each year. Houses constructed or renovated by HCD must meet HUD's minimum energy efficiency standards. While these minimum standards are more than adequate to meet local building codes, they are not as aggressive as the energy efficiency standards being promoted by the national utility organizations and the home building industry. Memphis Light, Gas and Water (MLGW), a city-owned utility, has developed an award-winning program named Comfort Plus which promotes energy efficiency open-quote in new residential construction. Under Comfort Plus, MLGW models house plans on computer for a fee and recommends cost-effective alterations which improve the energy efficiency of the house. If the builder agrees to include these recommendations, MLGW will certify the house and guarantee a maximum annual heating/cooling bill for two years. While the Comfort Plus program has received recognition in the new construction market, it does not address the existing housing stock

  8. Upgrade energy building standards and develop rating system for existing low-income housing

    Energy Technology Data Exchange (ETDEWEB)

    Muller, D.; Norville, C. [Memphis and Shelby County Div. of Planning and Development, TN (United States)

    1993-07-01

    The city of Memphis Division of Housing and Community Development (HCD) receives grant funding each year from the U.S. Department of Housing and Urban Development (HUD) to provide local housing assistance to low-income residents. Through the years, HCD has found that many of the program recipients have had difficulty in managing their households, particularly in meeting monthly financial obligations. One of the major operating costs to low-income households is the utility bill. Furthermore, HCD`s experience has revealed that many low-income residents are simply unaware of ways to reduce their utility bill. Most of the HCD funds are distributed to low-income persons as grants or no/low interest loans for the construction or rehabilitation of single-family dwellings. With these funds, HCD builds 80 to 100 new houses and renovates about 500 homes each year. Houses constructed or renovated by HCD must meet HUD`s minimum energy efficiency standards. While these minimum standards are more than adequate to meet local building codes, they are not as aggressive as the energy efficiency standards being promoted by the national utility organizations and the home building industry. Memphis Light, Gas and Water (MLGW), a city-owned utility, has developed an award-winning program named Comfort Plus which promotes energy efficiency{open_quote} in new residential construction. Under Comfort Plus, MLGW models house plans on computer for a fee and recommends cost-effective alterations which improve the energy efficiency of the house. If the builder agrees to include these recommendations, MLGW will certify the house and guarantee a maximum annual heating/cooling bill for two years. While the Comfort Plus program has received recognition in the new construction market, it does not address the existing housing stock.

  9. Ultrasonic nondestructive evaluation systems industrial application issues

    CERN Document Server

    Callegari, Sergio; Montisci, Augusto; Ricci, Marco; Versaci, Mario

    2015-01-01

    This book covers the practical implementation of ultrasonic NDT techniques in an industrial environment, discussing several issues that may emerge and proposing strategies for addressing them successfully.  It aims to bridge advanced academic research results and their application to industrial procedures. The topics covered in the text range from the basic operation of an ultrasonic NDT system to the simulation of the measurement operations; from the choice and generation of the signals energizing the system to the different ways of exploiting the probes and their output signals; and from quality assessment evaluation to the use of soft computing techniques for classification. Throughout the text, an effort is made to embrace a system view where the physical and technological aspects of sensing are addressed together with higher abstraction levels, such as signal and information processing. Consequently, the book aims at guiding the reader through the various tasks requested for developing a complete ultras...

  10. Housing building with steel framing system in subsidence zones: Pertinence and Sustainability

    Directory of Open Access Journals (Sweden)

    Luis Alfredo Hernádez Castillo

    2014-04-01

    Full Text Available The phenomenon of subsidence caused by the extraction of groundwater is a problem that occurs in different places around the world. Particularly in the Mexican Republic is a situation that affects several cities in at least eight states located in the central region. Given the particular nature of the subsoil that occurs in these regions affected, subsidence can generate cracks and fractures that are evident on the surface of the soil causing differential settlement affecting all types of construction causing considerable damage to the structural elements of the dwellings. The materials traditionally used for housing construction such as masonry and concrete among others, have stiffness characteristics that make them especially vulnerable to these effects. In contrast, steel is an excellent choice for use due to their structural characteristics, such as its high tensile strength, ductility, compressive good performance, high efficiency in weight — strength ratio, among other qualities. The cold formed thin-walled steel elements, are another type of very light profiles, although its use has been known for several decades, is in recent times that have extended their application, mainly in housing construction, and to a lesser scale commercial and industrial construction. The main advantage of this material is that it retains the mechanical properties of steel, but with a significant reduction in the weight of the items. The most common use of this type of profile is in the manufacture of structural frames as standard modules, the most common form it is assembly profile channel with rigid edge section and section profiles of single channel, with different dimensions and sizes. In full-scale testing and numerical simulation models, the system exhibits an excellent performance under differential displacements as those caused by subsidence, accepting considerable deformations without reaching the failure of structural elements. In the goodness of

  11. PARTICULATE MATTER CONCENTRATION AND EMISSION FACTOR IN THREE DIFFERENT LAYING HEN HOUSING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Annamaria Costa

    2009-09-01

    Full Text Available The aim of this study was to evaluate PM10 concentration in three different laying hens houses (traditional battery cages with aerated open manure storage, aviary system and vertical tiered cages with manure belts with forced air drying and to evaluate particulate matter emission into atmosphere during one year of observation. Internal and external temperature and relative humidity, ventilation rate, PM10 concentration have been continuously monitored in order to evaluate particulate matter concentration changes during the day and the season and to define PM10 emission factors. PM10 concentration was corrected by gravimetric technique to lower measurements error. In the aviary system house, TSP and fine particulate matter (particles smaller than 2.5 micron concentration was measured. Average yearly PM10 concentration was remarkably higher in the aviary system house with 0.215 mg m-3 vs 108 mg m-3 for the ventilated belt house and vs 0.094 mg m-3 for the traditional battery cages house. In the Aviary system housing, TSP concentration was 0.444 mg m-3 and PM2.5 was 0.032 mg m-3, highlighting the existence of a severe working environment for men and animals. Recorded values for PM10 emission were 0.433 mg h-1 hen-1 for battery cages housing type, 0.081 mg h-1 hen-1 for ventilated belt cages house, values lower than those available in literature, while the aviary system housing type showed the highest PM10 emission (1.230 mg h-1 hen-1 with appreciable peaks during the morning, together with the increased animal activity and daily farmer operations, as feed administration, cleaning and droppings removal.

  12. The study of residential life support environment system to initiate policy on sustainable simple housing

    Science.gov (United States)

    Siahaan, N. M.; Harahap, A. S.; Nababan, E.; Siahaan, E.

    2018-02-01

    This study aims to initiate sustainable simple housing system based on low CO2 emissions at Griya Martubung I Housing Medan, Indonesia. Since it was built in 1995, between 2007 until 2016 approximately 89 percent of houses have been doing various home renewal such as restoration, renovation, or reconstruction. Qualitative research conducted in order to obtain insights into the behavior of complex relationship between various components of residential life support environment that relates to CO2 emissions. Each component is studied by conducting in-depth interviews, observation of the 128 residents. The study used Likert Scale to measure residents’ perception about components. The study concludes with a synthesis describing principles for a sustainable simple housing standard that recognizes the whole characteristics of components. This study offers a means for initiating the practice of sustainable simple housing developments and efforts to manage growth and preserve the environment without violating social, economics, and ecology.

  13. Automated roof window control system to address overheating on renovated houses

    DEFF Research Database (Denmark)

    Psomas, Theofanis Ch.; Heiselberg, Per Kvols; Lyme, Thøger

    2017-01-01

    Highlights •Manually controlled passive cooling system do not assure high quality environment. •Automated window system reduces overheating risk in houses of temperate climates. •Window system offers similar indoor air quality with mechanical ventilation system. •User behavior on window system...

  14. Numerical simulation of a cooling tower coupled with heat pump system associated with single house using TRNSYS

    International Nuclear Information System (INIS)

    Chargui, R.; Sammouda, H.; Farhat, A.

    2013-01-01

    Highlights: • We simulate a cooling tower coupled with heat pump system and a single zone using TRNSYS. • We examine the temperature of water inside the cooling tower and inside the single zone. • We study the temporal evolution of the all parameters for 4500 h operation in winter in Tunisia. - Abstract: The industrial cooling towers in Tunisia meet difficulties due to the poor coordination between the utility and process sectors. In this study, we will consider especially the vapor recovery of the wastewater from the industrial activity in south Tunisia. By using the heat pump for high capacity, the problem for vapor from wastewater may be resolved. The coupling for the cooling tower and the heat pump system is investigated by TRNSYS software. The system of cooling tower is also associated with a single zone which is related to heat exchangers. An optimization model for the operation of a cooling water system was developed that accounts for a cooling tower, and a network of pipelines and heat exchangers for heating a single house. This work is based on numerical studies; the cooling tower performance, the single house, the heat pump and the heat exchanger that are simulated using TRNSYS model. The circulation of cooling water system is assured by a counter flow. The evaluations of the cooling tower geometry and performances are based on an adaptive version of Merkel’s method witch integrated in TRNSYS. The results of optimization using TRNSYS are validated by several theoretical and experimental studies

  15. Improving industrial process control systems security

    CERN Document Server

    Epting, U; CERN. Geneva. TS Department

    2004-01-01

    System providers are today creating process control systems based on remote connectivity using internet technology, effectively exposing these systems to the same threats as corporate computers. It is becoming increasingly difficult and costly to patch/maintain the technical infrastructure monitoring and control systems to remove these vulnerabilities. A strategy including risk assessment, security policy issues, service level agreements between the IT department and the controls engineering groups must be defined. In addition an increased awareness of IT security in the controls system engineering domain is needed. As consequence of these new factors the control system architectures have to take into account security requirements, that often have an impact on both operational aspects as well as on the project and maintenance cost. Manufacturers of industrial control system equipment do however also propose progressively security related solutions that can be used for our active projects. The paper discusses ...

  16. Coordination in contractual relations: Some preliminary findings from the Malaysian housing industry

    Directory of Open Access Journals (Sweden)

    Suraya Ismail

    2008-12-01

    Full Text Available The traditional general procurement route found in many housing projects in Malaysia is conceptualized as a governance structure following the transaction cost economics (TCE approach. This approach has been used to examine governance structures in different economic sectors in several countries but evidence of its use in the context of developing countries is limited. This lack of evidence has prompted the authors to conduct a preliminary study to ascertain whether a TCE approach can explain construction governance structures in developing countries. This research does not discuss the trade-off that governs the choice of hybrids, market or hierarchies for organizing transactions. Rather, it takes advantage of existing research to substantiate the specific properties of hybrid organizations as governance structures. The main focus is coordination. Coordination is specified at two levels. At Level 1 is the coordination of specialization (i.e. the formation of the project team members and at Level 2 is the coordination mode of the contracting parties (client and contractor and the agents involved (the lead designer and project manage r. A case survey method was adopted. Preliminary findings seem to suggest that clients have used hierarchical themes in the contracts and high powered incentives to coordinate with in the contracting parties. The research findings suggest that all participants involved in the sample studied used governance structures symptomatic of a hybrid organization.

  17. Hen genetic strain and extended cold storage influence on physical egg quality from cage-free aviary housing system.

    Science.gov (United States)

    Jones, D R; Karcher, D M; Regmi, P; Robison, C O; Gast, R K

    2018-04-02

    In the United States, there is an increase in need for cage-free eggs in retail and food manufacturing sectors. Understanding the impact of cage-free systems and the corresponding management on egg quality is pertinent as the U.S. industry adapts existing housing and builds new cage-free housing structures. A study was conducted comparing 2 brown shell and 2 white shell hen strains housed in a cage-free aviary system. Each set of eggs were placed in cold storage and assessed at 0, 2, 4, 8, and 12 wk. Eggs were collected at 21, 31, 42, and 60 wk of hen age. A full profile of physical quality measurements was conducted on up to 18 intact eggs for each hen strain/egg storage/hen age combination. Egg weight increased approximately 10 g for brown shell and 14 g for white shell eggs as hens aged. Many of the properties monitored were significantly impacted by all 3 main effects (hen strain, egg storage, and hen age) resulting in 3-way interactions. A brown and a white shell strain had stronger shells (44 N; P study also determined volume of shell, total length, maximum width, and percent length at maximum width to more accurately indicate egg shape than shape index. One brown shell strain produced eggs with the most consistent shape characteristics over the hen ages monitored. White shell eggs from the cage-free aviary housing produced the highest whole-egg total solids between 31 to 60 wk of hen age, whereas brown shell eggs resulted in the most consistent level of whole-egg total solids (22-23.5%). The brown and white shell strains in the current study produce cage-free aviary eggs with distinctive physical quality attributes. The outcomes from this study can be utilized by the U.S. egg industry in planning management strategies and market placement of cage-free eggs.

  18. Automated packing systems: review of industrial implementations

    Science.gov (United States)

    Whelan, Paul F.; Batchelor, Bruce G.

    1993-08-01

    A rich theoretical background to the problems that occur in the automation of material handling can be found in operations research, production engineering, systems engineering and automation, more specifically machine vision, literature. This work has contributed towards the design of intelligent handling systems. This paper will review the application of these automated material handling and packing techniques to industrial problems. The discussion will also highlight the systems integration issues involved in these applications. An outline of one such industrial application, the automated placement of shape templates on to leather hides, is also discussed. The purpose of this system is to arrange shape templates on a leather hide in an efficient manner, so as to minimize the leather waste, before they are automatically cut from the hide. These pieces are used in the furniture and car manufacturing industries for the upholstery of high quality leather chairs and car seats. Currently this type of operation is semi-automated. The paper will outline the problems involved in the full automation of such a procedure.

  19. Formal verification of industrial control systems

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    Verification of critical software is a high priority but a challenging task for industrial control systems. For many kinds of problems, testing is not an efficient method. Formal methods, such as model checking appears to be an appropriate complementary method. However, it is not common to use model checking in industry yet, as this method needs typically formal methods expertise and huge computing power. In the EN-ICE-PLC section, we are working on a [methodology][1] and a tool ([PLCverif][2]) to overcome these challenges and to integrate formal verification in the development process of our PLC-based control systems. [1]: http://cern.ch/project-plc-formalmethods [2]: http://cern.ch/plcverif

  20. Programming of Canberra Industries 8100/Quanta System

    International Nuclear Information System (INIS)

    Yoshida, Hiroshi; Kubo, Katsumi

    1980-03-01

    In this report are described usage of an interactive programming language ''CLASS'' (Canberra Laboratory Automation Software System) which is a feature the software for Canberra Industries 8100/Quanta System consisting of a Canberra Industries 8100 multichannel analyzer (MCA) and a PDP-11/05 mini-computer, and the programs with CLASS developed to process and analyze the data of gamma spectra obtained with semiconductor detectors. The programs are (1) to compute the coefficients in the formulae that relate the channel numbers of gamma-ray photopeaks obtained from MCA and the energy values; (2) to subtract the background component from the total count of a photopeak obtained from MCA, and (3) to calculate the lapse of time in days or years following the preparation of a radiation source. (author)

  1. SIMS: The SLAC Industrial Measurement System

    International Nuclear Information System (INIS)

    Bell, B.

    1990-01-01

    Kern was the first survey company to market an Industrial Measurement System when it released ECDS (Electronic Coordinate Determination System) in the mid-1980s. Originally written for the PDP-11, a version was later released for the PC (ECDS-PC). SLAC purchased this system in 1986 and immediately began to use it for the alignment of the SLC (Stanford Linear Collider). Although ECDS enabled SLAC to perform tasks with a speed never before achieved, they experienced limitations in the software. Since Kern proved unresponsive and SLAC was unable to purchase the source code for any amount of money, they set about writing their own portions of code. They first wrote a system of menus tailored for their specific alignment tasks, and disabled much of the ECDS menu structure. Due to dissatisfaction with the ECDS bundle adjustment program, they wrote their own bundle adjustment in 1988. A further step towarad having their own complete IMS was to develop a data capture program, a task which has been underway since the beginning of this year. They do not yet have data analysis features that are fully integrated, but they do have stand-alone packages that have been written at SLAC. When they first started tinkering with ECDS there was no intention of developing a complete system, but they now have all the elements of such a system - SIMS, the SLAC Industrial Measurement System

  2. SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M.M. Ansari

    2005-04-05

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

  3. Causes of mortality in laying hens in different housing systems in 2001 to 2004

    Directory of Open Access Journals (Sweden)

    Etterlin Pernille

    2009-01-01

    Full Text Available Abstract Background The husbandry systems for laying hens were changed in Sweden during the years 2001 – 2004, and an increase in the number of submissions for necropsy from laying hen farms was noted. Hence, this study was initiated to compare causes of mortality in different housing systems for commercial laying hens during this change. Methods Based on results from routine necropsies of 914 laying hens performed at the National Veterinary Institute (SVA in Uppsala, Sweden between 2001 and 2004, a retrospective study on the occurrence of diseases and cannibalism, i.e., pecking leading to mortality, in different housing systems was carried out. Using the number of disease outbreaks in caged flocks as the baseline, the expected number of flocks with a certain category of disease in the other housing systems was estimated having regard to the total number of birds in the population. Whether the actual number of flocks significantly exceeded the expected number was determined using a Poisson distribution for the variance of the baseline number, a continuity correction and the exact value for the Poisson distribution function in Excel 2000. Results Common causes of mortality in necropsied laying hens included colibacillosis, erysipelas, coccidiosis, red mite infestation, lymphoid leukosis and cannibalism. Less common diagnoses were Newcastle Disease, pasteurellosis and botulism. Considering the size of the populations in the different housing systems, a larger proportion of laying hens than expected was submitted for necropsy from litter-based systems and free range production compared to hens in cages (P P P Conclusion The results of the present study indicated that during 2001–2004 laying hens housed in litter-based housing systems, with or without access to outdoor areas, were at higher risk of infectious diseases and cannibalistic behaviour compared to laying hens in cages. Future research should focus on finding suitable prophylactic

  4. An HTR cogeneration system for industrial application

    International Nuclear Information System (INIS)

    Haverkate, B.R.W.; Van Heek, A.I.; Kikstra, J.F.

    1999-01-01

    Because of its favourable characteristics of safety and simplicity the high-temperature reactor (HTR) could become a competitive heat source for a cogeneration unit. The Netherlands is a world leading country in the field of cogeneration. As nuclear energy remains an option for the medium and long term in this country, systems for nuclear cogeneration should be explored and developed. Hence, ECN Nuclear Research is developing a conceptual design of an HTR for Combined generation of Heat and Power (CHP) for the industry in and outside the Netherlands. The design of this small CHP-unit for industrial applications is mainly based on a pre-feasibility study in 1996, performed by a joint working group of five Dutch organisations, in which technical feasibility was shown. The concept that was subject of that study, INCOGEN, used a 40 MW thermal pebble bed HTR and produced a maximum amount of electricity plus low temperature heat. The system has been improved to produce industrial quality heat, and has been renamed ACACIA. The output of this installation is 14 MW electricity and 17 tonnes of steam per hour, with a pressure of 10 bar and a temperature of 220C. The economic characteristics of this installation turned out to be much more favourable using modern cost data. 15 refs

  5. Beyond Housing First: Essential Elements of a System-Planning Approach to Ending Homelessness

    Directory of Open Access Journals (Sweden)

    Alina Turner

    2014-10-01

    Full Text Available The concept of “Housing First” has taken on a powerful status in the complex of government, non-profit and academic systems that study and seek to eliminate homelessness. It is a compelling concept, in that it has brought our society to the realization that housing instability itself is often the culmination of various underlying and intersecting issues, ranging from mental health and addiction issues to domestic abuse and poverty. The “Housing First” principle holds that homeless individuals stand a far poorer chance of improving their condition while they remain homeless; that the stability of a permanent home provides the foundation that allows individuals to begin addressing the issues that led to their housing instability in the first place. However, the elegance of the fundamental principle behind “Housing First” also risks creating an illusion, wherein agencies and governments might too easily conclude that the entirety of this approach to ending homelessness is merely to begin housing the homeless. While that is a step in the process, it is but a piece of the Housing First approach. And unless all the various elements of the approach are also included in the actual work done on the ground, the success observed so far in communities that have tried the Housing First approach will not necessarily be replicated. This can lead to disappointment for those trying to implement new strategies, undermine the effectiveness of Housing First, and most importantly, fail to fully help those individuals in need. Housing First encompasses a strategic application of key principles across the entire homeless-serving system. When it is introduced into a new jurisdiction, it must be accompanied by an overhaul of the current approach to social policy and service delivery. The implementation of Housing First requires a difficult and systematic process, beginning with planning and strategy development that recognizes how every part of the homeless

  6. Model-predicted ammonia emission from two broiler houses with different rearing systems

    OpenAIRE

    Lima,Nilsa Duarte Silva; Garcia,Rodrigo Garófallo; Nääs,Irenilza Alencar; Caldara,Fabiana Ribeiro; Ponso,Roselaine

    2015-01-01

    Ammonia (NH3) emissions from broiler production can affect human and animal health and may cause acidification and eutrophication of the surrounding environment. This study aimed to estimate ammonia emissions from broiler litter in two systems of forced ventilation, the tunnel ventilation (TV) and the dark house (DH). The experiment was carried out on eight commercial broiler houses, and the age of the birds (day, d), pH and litter temperature were recorded. Broilers were reared on built-up w...

  7. Performance measurement for information systems: Industry perspectives

    Science.gov (United States)

    Bishop, Peter C.; Yoes, Cissy; Hamilton, Kay

    1992-01-01

    Performance measurement has become a focal topic for information systems (IS) organizations. Historically, IS performance measures have dealt with the efficiency of the data processing function. Today, the function of most IS organizations goes beyond simple data processing. To understand how IS organizations have developed meaningful performance measures that reflect their objectives and activities, industry perspectives on IS performance measurement was studied. The objectives of the study were to understand the state of the practice in IS performance techniques for IS performance measurement; to gather approaches and measures of actual performance measures used in industry; and to report patterns, trends, and lessons learned about performance measurement to NASA/JSC. Examples of how some of the most forward looking companies are shaping their IS processes through measurement is provided. Thoughts on the presence of a life-cycle to performance measures development and a suggested taxonomy for performance measurements are included in the appendices.

  8. Future cyclotron systems : an industrial perspective

    International Nuclear Information System (INIS)

    Stevenson, N.R.; Dickie, W.J.

    1995-09-01

    The use of commercial cyclotron systems for the production of radioisotopes continues to grow on a world-wide scale. Improvements in technology have significantly increased the production capabilities of modem cyclotron-based isotope production facilities. In particular, the change to negative ion acceleration and new high power systems have resulted in dramatic improvements in reliability, increases in capacity, and decreases in personnel radiation dose. As more and more older machines are retired decisions regarding their replacement are made based on several factors including the market's potential and the cyclotron system's abilities. Taking the case of the recently upgraded TR30 cyclotron at TRIUMF/Nordion, we investigate the requirements industrial/medical users are likely to impose on future commercial cyclotron systems and the impact this will have on cyclotron technology by the end of the century. (author)

  9. Future cyclotron systems: An industrial perspective

    International Nuclear Information System (INIS)

    Stevenson, N.R.; Dickie, W.J.

    1995-09-01

    The use of commercial cyclotron systems for the production of radioisotopes continues to grow on a world-wide scale. Improvements in technology have significantly increased the production capabilities of modern cyclotron-based isotope production facilities. In particular, the change to negative ion acceleration and new high power systems have resulted in dramatic improvements in reliability, increases in capacity, and decreases in personnel radiation dose. As more and more older machines are retired, decisions regarding their replacement are made based on several factors including the market's potential and the cyclotron system's abilities. Taking the case of the recently upgraded TR30 cyclotron at TRIUMF/Nordion, the authors investigate the requirements industrial/medical users are likely to impose on future commercial cyclotron systems and the impact this will have on cyclotron technology by the end of the century

  10. Economic aspects of interlocking hollow brick system designed for industrialized building system

    Science.gov (United States)

    Tahir, Mahmood Md.; Saggaff, Anis; Ngian, Shek Poi; Sulaiman, Arizu

    2017-11-01

    Construction industry has moved forward into a technology driven where a transition is in progress from conventional method to a more advanced and mechanised system known as the Industrialised Building System (IBS). However, the need to implement the IBS should be well understood by all construction players such as designer, architect, contraction, erectors and construction workers. Therefore, there is a need to educate all these construction players which should be spearheaded by authorities such as Construction Industrial Development Board where enforcement trough building by laws as well as initiative to those that adopt the IBS in their construction. This paper reports on economic aspects of using interlocking hollow brick system in construction as an alternative method offered for Industrialized Building System. The main objective is to address the economic aspects of using interlocking block system in terms of time, costs, and utilization of manpower and to present some of the experimental tests results related to Interlocking Hollow Brick System (IHBS). Example of savings from the use of IHBS is presented in this paper by comparing the construction of two storey terrace house with build-up area of about 200 square meter with conventional construction method of typical reinforced concrete construction (RCC) compared to IHBS. The comparison shows that the implementation of IHBS can reduce construction time, cost, and utilization of man power up to 26.6% compared to the conventional method. Moreover, the construction time using IHBS can also be reduced by up to 50% as compared to the conventional construction.

  11. Sole disorders in conventionally managed and organic dairy herds using different housing systems

    DEFF Research Database (Denmark)

    Vaarst, Mette; Hindhede, Jens; Enevoldsen, Carsten

    1998-01-01

    Records of claw trimmings were analyzed in seven organic and six conventional Danish herds (a total of 974 cows). The housing systems represented were tie stall systems, loose housing system with slatted floor (one organic herd), and deep litter systems (deep straw bedding). Occurrence of sole...... stage from 61 to 120 d post partum in cows of other dual purpose breeds was positively associated with the presence of sole ulcer in one leg only in first parity cows. The time of year for claw trimming was a risk factor for acute haemorrhage in first parity cows, with the period from December...

  12. Upgrading safety systems of industrial irradiation facilities

    International Nuclear Information System (INIS)

    Gomes, R.S.; Gomes, J.D.R.L.; Costa, E.L.C.; Costa, M.L.L.; Thomé, Z.D.

    2017-01-01

    The first industrial irradiation facility in operation in Brazil was designed in the 70s. Nowadays, twelve commercial and research facilities are in operation and two already decommissioned. Minor modifications and upgrades, as sensors replacement, have been introduced in these facilities, in order to reduce the technological gap in the control and safety systems. The safety systems are designed in agreement with the codes and standards at the time. Since then, new standards, codes and recommendations, as well as lessons learned from accidents, have been issued by various international committees or regulatory bodies. The rapid advance of the industry makes the safety equipment used in the original construction become obsolete. The decreasing demand for these older products means that they are no longer produced, which can make it impossible or costly to obtain spare parts and the expansion of legacy systems to include new features. This work aims to evaluate existing safety systems at Brazilian irradiation facilities, mainly the oldest facilities, taking into account the recommended IAEA's design requirements. Irrespective of the fact that during its operational period no event with victims have been recorded in Brazilian facilities, and that the regulatory inspections do not present any serious deviations regarding the safety procedures, it is necessary an assessment of safety system with the purpose of bringing their systems to 'the state of the art', avoiding their rapid obsolescence. This study has also taken into account the knowledge, concepts and solutions developed to upgrading safety system in irradiation facilities throughout the world. (author)

  13. Upgrading safety systems of industrial irradiation facilities

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, R.S.; Gomes, J.D.R.L.; Costa, E.L.C.; Costa, M.L.L., E-mail: rogeriog@cnen.gov.br, E-mail: jlopes@cnen.gov.br, E-mail: evaldo@cnen.gov.br, E-mail: mara@cnen.gov.br [Comissão Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil). Diretoria de Radioproteção e Segurança Nuclear; Thomé, Z.D., E-mail: zielithome@gmail.com [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Seção de Engenharia Nuclear

    2017-07-01

    The first industrial irradiation facility in operation in Brazil was designed in the 70s. Nowadays, twelve commercial and research facilities are in operation and two already decommissioned. Minor modifications and upgrades, as sensors replacement, have been introduced in these facilities, in order to reduce the technological gap in the control and safety systems. The safety systems are designed in agreement with the codes and standards at the time. Since then, new standards, codes and recommendations, as well as lessons learned from accidents, have been issued by various international committees or regulatory bodies. The rapid advance of the industry makes the safety equipment used in the original construction become obsolete. The decreasing demand for these older products means that they are no longer produced, which can make it impossible or costly to obtain spare parts and the expansion of legacy systems to include new features. This work aims to evaluate existing safety systems at Brazilian irradiation facilities, mainly the oldest facilities, taking into account the recommended IAEA's design requirements. Irrespective of the fact that during its operational period no event with victims have been recorded in Brazilian facilities, and that the regulatory inspections do not present any serious deviations regarding the safety procedures, it is necessary an assessment of safety system with the purpose of bringing their systems to 'the state of the art', avoiding their rapid obsolescence. This study has also taken into account the knowledge, concepts and solutions developed to upgrading safety system in irradiation facilities throughout the world. (author)

  14. Development of piglets raised in a new multi-litter housing system vs. conventional single-litter housing until 9 weeks of age

    NARCIS (Netherlands)

    Nieuwamerongen, van S.E.; Soede, N.M.; Peet-Schwering, van der C.M.C.; Kemp, B.; Bolhuis, J.E.

    2015-01-01

    This study compared the development until 9 wk of age of piglets raised in either a multi-litter (ML) system or a conventional single-litter (SL) system. The ML system consisted of a multi-suckling system with 5 sows and their litters before weaning, followed by housing in a pen with enrichment in a

  15. 46 CFR 111.107-1 - Industrial systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Industrial systems. 111.107-1 Section 111.107-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Industrial Systems § 111.107-1 Industrial systems. (a) For the purpose of this subpart, an...

  16. Standard house with integrated solar cell system. Technical final report; Typehus med integreret solcelleanlaeg. Faglig slutrapport

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The interest in solar cell technology among Danish house owners is increasing, but there are many considerations to be made before the house owner choose to install solar cells on the house. Major barriers are the solar cell systems' price and appearance. This interdisciplinary development project will show that both aesthetic and economic advantages can be derived from integrating solar cells already when the first sketches of the house are being made. In order to promote utilization of solar cells in Denmark the solutions must be attractive, both economically and aesthetically. Therefore the solar cell solutions in this project are developed in preparation for marketing both as an aesthetic expression and a high-technological, green and prestigious element. (BA)

  17. Development of industrial variant specification systems

    DEFF Research Database (Denmark)

    Hansen, Benjamin Loer

    be developed from a holistic and strategically anchored point of view. Another assumption is that this is a challenge for many industrial companies. Even though the literature presents many considerations on general issues covering new information technology, little work is found on the business perspectives...... are discussed. A list of structural variables and solution components has been created. These are related to four design aspects in the holistic system design covering the aspects of process design, selection of resources (such as hardware, software and humans), the design of information structures...... solution elements and structural variables to be used in the design of variant specification systems. The thesis presents a “top-down” procedure to be used to develop variant specification systems from a strategically anchored and holistic point of view. A methodology and related task variables...

  18. Radio transmission system for industrial area

    International Nuclear Information System (INIS)

    Iliescu, M.; Culcer, M.; Curuia, M.; Anghel, N.M.; Stefanescu, I.

    2003-01-01

    The paper deals with a data transmission system operating in a large, noisy industrial area. The radio transmission system permits data and commands communication between the local units of collecting data and a central monitoring and/or command station ( dispatch). The communication support are radio waves in the range 450 MHz. The transducers are of transmitter type, with 4-20 mA output signal, providing information about environmental and/or work parameters. Data are primarily acquisitioned in a data logger with microcontroller, then transmitted via a FSK radio modem and a radio station to the dispatch. Data logger can also be connected in a network. The dispatch personal computer receives and processes data and transmits commands. The system functioning is supervised by a communication software in MCS - 51 assembler and an application software in Visual C ++ . (author)

  19. Introduction of a Greenhouse as an Alternative Housing System to a Conventional House and Its Impact on Broiler Performance and Blood and Carcass Variables

    Directory of Open Access Journals (Sweden)

    Khajali F

    2013-01-01

    Full Text Available A study was conducted to compare the growth performance as well as blood and carcass variables of two broiler strains reared in a conventional broiler house and a modified greenhouse equipped with cooling pads and tunnel ventilation system. Eight hundred day-old chickens of two commercial strains (Ross  308 and Lohmann were selected and placed in  8 floor pens (4 pens of  50 broilers for each strain in each housing system. The pens were located randomly throughout the modified greenhouse or the conventional broiler house (two-way ANOVA design. The broilers were provided a standard starter and grower diets  ad libitum. The environmental conditions (i.e.  temperature, relative humidity, lighting program and ventilation rate were kept  similar between the two houses. The results showed that the birds in the greenhouse consumed significantly (P

  20. Land Combat Systems Industry. Industry Study, Spring 2009

    Science.gov (United States)

    2009-01-01

    such a technology hastened to production that might cause what the government tends to call “technological surprise” is Friction Stir Welding . This...Success Stories. “ Friction Stir Welding of Aluminum Armor”. March 2002. Available online: http://www.onr.navy.mil/sci_tech/3t/mantech/docs...supply tenders as well as other factors.4 Competition in the industry is typically low and steady, but affected by increased LCS funding along with the

  1. Effect of Housing System, Slaughter Age and Sex on Slaughter and Carcass Parameters of Broiler Ducks

    Directory of Open Access Journals (Sweden)

    Cyril Hrnčár

    2014-11-01

    Full Text Available The aim of this study was to determine the effects of housing system slaughterage and sex on performance and carcass parameters of broiler ducks. Theexperiment was carried out in half-operation conditions experimental base ofDepartment of Poultry Science and Small Animal Husbandry of Slovak Universityof Agriculture in Nitra. A total of 60 one day old ducklings (type Peking DuckWhite were randomly divided to 2 housing groups: three-floor cage system anddeep litter system, both under uniform microclimate conditions. The housingsystem, slaughter age and sex significantly affected the slaughter weights ofbroiler ducks in 49 and 56 day of fattening. The results of this study showed the influenceof housing system, sex and slaughter age on slaughter and carcass parameters.The slaughter and carcass parameters were statistically higher (P0.05. The some slaughterand carcass parameters of male ducks were statistically higher (P<0.05 comparedwith female ducks.

  2. A novel teaching system for industrial robots.

    Science.gov (United States)

    Lin, Hsien-I; Lin, Yu-Hsiang

    2014-03-27

    The most important tool for controlling an industrial robotic arm is a teach pendant, which controls the robotic arm movement in work spaces and accomplishes teaching tasks. A good teaching tool should be easy to operate and can complete teaching tasks rapidly and effortlessly. In this study, a new teaching system is proposed for enabling users to operate robotic arms and accomplish teaching tasks easily. The proposed teaching system consists of the teach pen, optical markers on the pen, a motion capture system, and the pen tip estimation algorithm. With the marker positions captured by the motion capture system, the pose of the teach pen is accurately calculated by the pen tip algorithm and used to control the robot tool frame. In addition, Fitts' Law is adopted to verify the usefulness of this new system, and the results show that the system provides high accuracy, excellent operation performance, and a stable error rate. In addition, the system maintains superior performance, even when users work on platforms with different inclination angles.

  3. Reducing hours of work of preregistration house officers: report on a shift system.

    OpenAIRE

    Nasmyth, D. G.; Pickersgill, A.; Hogarth, M.

    1991-01-01

    OBJECTIVE--To determine the advantages and disadvantages of a shift system of working compared with the conventional on call system for preregistration house officers. DESIGN--A shift system of working was employed in the unit from 1 August 1989 to 31 July 1990. During attachments of three or six months four house officers rotated at intervals of one month among three daytime shifts and one night shift (Mondays to Fridays only). Weekends (48 hours) were worked on a one in three rota by the do...

  4. Workshop - Solar cells and daylight. Solar cell house. House building with integrated solar cell systems; Workshop - Solceller og dagslys. Solcellehus. Boligbyggeri med integrerede solcelleanlaeg

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, Mio; Hansen, Ellen Kathrine

    2005-04-15

    The workshop 'Solar cells and daylight' at Aarhus School of Architecture aimed at studying and developing architectural potentials of integrating solar cell systems in building components for future house building. The aim of the process was to stress that technical conditions such as energy technological component design might work as central points of support in the future shaping and organisation of qualitative and functional design of houses. (BA)

  5. Improving Fan System Performance: A Sourcebook for Industry

    Energy Technology Data Exchange (ETDEWEB)

    2003-04-01

    This is one of a series of sourcebooks on motor-driven equipment produced by the Industrial Technologies Program. It provides a reference for industrial fan systems users, outlining opportunities to improve fan system performance.

  6. An HTR cogeneration system for industrial applications

    International Nuclear Information System (INIS)

    Haverkate, B.R.W.; Heek, A.I. van; Kikstra, J.F.

    2001-01-01

    Because of its favourable characteristics of safety and simplicity the high-temperature reactor (HTR) could become a competitive heat source for a cogeneration unit. The Netherlands is a world leading country in the field of cogeneration. As nuclear energy remains an option for the medium and long term in this country, systems for nuclear cogeneration should be explored and developed. Hence, ECN Nuclear Research is developing a conceptual design of an HTR for Combined generation of Heat and Power (CHP) for the industry in and outside the Netherlands. The design of this small CHP-unit for industrial applications is mainly based on a pre-feasibility study in 1996, performed by a joint working group of five Dutch organisations, in which technical feasibility was shown. The concept that was subject of this study, INCOGEN, used a 40 MW thermal pebble bed HTR and produced a maximum amount of electricity plus low temperature heat. The system has been improved to produce industrial quality heat, and has been renamed ACACIA. The output of this installation is 14 MW electricity and 17 tonnes of steam per hour, with a pressure of 10 bar and a temperature of 220 deg. C. The economic characteristics of this installation turned out to be much more favourable using modern data. The research work for this installation is embedded in a programme that has links to the major HTR projects in the world. Accordingly ECN participates in several IAEA Co-ordinated Research Programmes (CRPs). Besides this, ECN is involved in the South African PBMR-project. Finally, ECN participates in the European Concerted Action on Innovative HTR. (author)

  7. Biofouling and biocorrosion in industrial water systems.

    Science.gov (United States)

    Coetser, S E; Cloete, T E

    2005-01-01

    Corrosion associated with microorganisms has been recognized for over 50 years and yet the study of microbiologically influenced corrosion (MIC) is relatively new. MIC can occur in diverse environments and is not limited to aqueous corrosion under submerged conditions, but also takes place in humid atmospheres. Biofouling of industrial water systems is the phenomenon whereby surfaces in contact with water are colonized by microorganisms, which are ubiquitous in our environment. However, the economic implications of biofouling in industrial water systems are much greater than many people realize. In a survey conducted by the National Association of Corrosion Engineers of the United States ten years ago, it was found that many corrosion engineer did not accept the role of bacteria in corrosion, and many of then that did, could not recognize and mitigate the problem. Biofouling can be described in terms of its effects on processes and products such as material degradation (bio-corossion), product contamination, mechanical blockages, and impedance of heat transfer. Microorganisms distinguish themselves from other industrial water contaminants by their ability to utilize available nutrient sources, reproduce, and generate intra- and extracellular organic and inorganic substances in water. A sound understanding of the molecular and physiological activities of the microorganisms involved is necessary before strategies for the long term control of biofouling can be format. Traditional water treatment strategies however, have largely failed to address those factors that promote biofouling activities and lead to biocorrosion. Some of the major developments in recent years have been a redefinition of biofilm architecture and the realization that MIC of metals can be best understood as biomineralization.

  8. Reducing hours of work of preregistration house officers: report on a shift system.

    Science.gov (United States)

    Nasmyth, D G; Pickersgill, A; Hogarth, M

    1991-01-12

    To determine the advantages and disadvantages of a shift system of working compared with the conventional on call system for preregistration house officers. A shift system of working was employed in the unit from 1 August 1989 to 31 July 1990. During attachments of three or six months four house officers rotated at intervals of one month among three daytime shifts and one night shift (Mondays to Fridays only). Weekends (48 hours) were worked on a one in three rota by the doctors working a day shift. The views of the house officers working this shift system were sought in writing and by direct interview. Professorial surgical unit, Royal Liverpool Hospital. The 14 house officers who were attached to the unit for three or six months during their preregistration year. The shift system was preferred to conventional on call without exception. The incidence of chronic tiredness was reduced and formal hand-over between shifts resulted in more informed decision making by doctors while on call. During annual leave it was sometimes necessary to revert to the conventional one in three on call system to ensure that daytime work was completed. Other disadvantages were the long weekend shift and an inequitable distribution of the night shift. The house officers recommended extending the shifts to weekends and working the night shift one week in four. A shift system of working was effective in reducing chronic tiredness among house officers, who found it preferable to conventional on call arrangements. Shift working is feasible only if the daytime duties of the doctor working at night can be completed by the other doctors on the rota.

  9. Industrial Internet of Things cybermanufacturing systems

    CERN Document Server

    Brecher, Christian; Song, Houbing; Rawat, Danda

    2017-01-01

    Developing the core system science needed to enable the development of a complex industrial internet of things/manufacturing CPS (IIoT/M-CPS), this book will foster a research community committed to advancing research and education in IIoT/M-CPS and to transitioning applicable science and technology into engineering practice. Presenting the current state IIoT and the concept of cybermanufacturing, this book is at the nexus of research advances from the engineering and computer and information science domains. It features contributions from leading experts in the field with years of experience in advancing manufacturing. Readers will acquire the core system science needed to transform to cybermanufacturing that spans the full spectrum from ideation to physical realization.

  10. Water supply rates for recirculating evaporative cooling systems in poultry housing

    Science.gov (United States)

    Evaporative cooling (EC) is an important tool to reduce heat stress in animal housing systems. Expansion of ventilation capacity in tunnel ventilated poultry facilities has resulted in increased water demand for EC systems. As water resources become more limited and costly, proper planning and des...

  11. Assessment of different bedding systems for lactating cows in freestall housing

    Science.gov (United States)

    The objective of this study was to compare different bedding systems for lactating cows in freestall housing. Bedding systems included new sand (NS), recycled byproducts of manure separation (organic solids [OS] and recycled sand [RS]), and foam-core mattresses with a shallow layer of OS (MS). The e...

  12. Influence of different housing systems on the performance of hens of ...

    African Journals Online (AJOL)

    Overall the battery system seems to be more advantageous than the other systems, yielding a signifi- cantly higher henday egg ... formance of hens of four laying strains in a battery, floor house and ..... and disease resistance. 23-27 July, 1990.

  13. A planning support system to optimize approval of private housing development projects

    Science.gov (United States)

    Hussnain, M. Q.; Wakil, K.; Waheed, A.; Tahir, A.

    2016-06-01

    Out of 182 million population of Pakistan, 38% reside in urban areas having an average growth rate of 1.6%, raising the urban housing demand significantly. Poor state response to fulfil the housing needs has resulted in a mushroom growth of private housing schemes (PHS) over the years. Consequently, only in five major cities of Punjab, there are 383 legal and 150 illegal private housing development projects against 120 public sector housing schemes. A major factor behind the cancerous growth of unapproved PHS is the prolonged and delayed approval process in concerned approval authorities requiring 13 months on average. Currently, manual and paper-based approaches are used for vetting and for granting the permission which is highly subjective and non-transparent. This study aims to design a flexible planning support system (PSS) to optimize the vetting process of PHS projects under any development authority in Pakistan by reducing time and cost required for site and documents investigations. Relying on the review of regulatory documents and interviews with professional planners and land developers, this study describes the structure of a PSS developed using open- source geo-spatial tools such as OpenGeo Suite, PHP, and PostgreSQL. It highlights the development of a Knowledge Module (based on regulatory documents) containing equations related to scheme type, size (area), location, access road, components of layout plan, planning standards and other related approval checks. Furthermore, it presents the architecture of the database module and system data requirements categorized as base datasets (built-in part of PSS) and input datasets (related to the housing project under approval). It is practically demonstrated that developing a customized PSS to optimize PHS approval process in Pakistan is achievable with geospatial technology. With the provision of such a system, the approval process for private housing schemes not only becomes quicker and user-friendly but also

  14. Proposal for the award of an industrial service contract for stores operations and relatedlogistics, in-house mail distribution and transport services on the CERN site

    CERN Document Server

    2006-01-01

    This document concerns the award of an industrial support contract for stores operations and related logistics, in-house mail distribution and transport services on the CERN site. The Finance Committee is invited to agree to the negotiation of a contract with the consortium ISS (CH) - ISS (ES), for stores operations and related logistics, in-house mail distribution and transport services on the CERN site for a period of three years for a total amount not exceeding 10 312 028 Swiss francs not subject to revision. The contract will include options for two one-year extensions beyond the initial three-year period.

  15. Specific characteristics of the aviary housing system affect plumage condition, mortality and production in laying hens.

    Science.gov (United States)

    Heerkens, Jasper L T; Delezie, Evelyne; Kempen, Ine; Zoons, Johan; Ampe, Bart; Rodenburg, T Bas; Tuyttens, Frank A M

    2015-09-01

    Feather pecking and high mortality levels are significant welfare problems in non-cage housing systems for laying hens. The aim of this study was to identify husbandry-related risk factors for feather damage, mortality, and egg laying performance in laying hens housed in the multi-tier non-cage housing systems known as aviaries. Factors tested included type of system flooring, degree of red mite infestation, and access to free-range areas. Information on housing characteristics, management, and performance in Belgian aviaries (N=47 flocks) were obtained from a questionnaire, farm records, and farm visits. Plumage condition and pecking wounds were scored in 50 randomly selected 60-week-old hens per flock. Associations between plumage condition, wounds, performance, mortality, and possible risk factors were investigated using a linear model with a stepwise model selection procedure. Many flocks exhibited a poor plumage condition and a high prevalence of wounds, with considerable variation between flocks. Better plumage condition was found in wire mesh aviaries (Pfeather cover had lower levels of mortality (Pnest perches. Wire mesh flooring in particular seems to have several health, welfare, and performance benefits in comparison to plastic slats, possibly related to decreased feather pecking, better hygiene, and fewer red mite infestations. This suggests that adjustments to the aviary housing design may further improve laying hen welfare and performance. © 2015 Poultry Science Association Inc.

  16. In Middle Europe, heating of an industrial building only with solar energy. First solar house industrial building with passive house standard in this size; In Mitteleuropa ein Industriegebaeude nur mit der Sonne heizen. Erstes Sonnenhaus Industriegebaeude mit Passivhaus-Standard in dieser Groesse

    Energy Technology Data Exchange (ETDEWEB)

    Huemer, Herbert [Xolar Renewable Energy Group HQ, Eberstalzell (Austria)

    2010-07-01

    Since 2008, Xolar Renewable Energy Group (Eberstalzell, Austria) combines the companies Sunmaster and Xolar in the most modern solar house in Europe with passive house standard. The contribution under consideration reports on the development of an industrial building which is heated entirely by solar energy and meets the standards of passive houses. All working places in the building should be sunny and free of draught. It does not use electrically powered heat pumps or refrigerators. All energy values calculated by simulation were achieved or partly exceeded. The savings in annual operating costs compared to conventional construction in factory buildings is approximately 192,000 Euro per year.

  17. Multisensor system and artificial intelligence in housing for the elderly.

    Science.gov (United States)

    Chan, M; Bocquet, H; Campo, E; Val, T; Estève, D; Pous, J

    1998-01-01

    To improve the safety of a growing proportion of elderly and disabled people in the developed countries, a multisensor system based on Artificial Intelligence (AI), Advanced Telecommunications (AT) and Information Technology (IT) has been devised and fabricated. Thus, the habits and behaviours of these populations will be recorded without disturbing their daily activities. AI will diagnose any abnormal behavior or change and the system will warn the professionals. Gerontology issues are presented together with the multisensor system, the AI-based learning and diagnosis methodology and the main functionalities.

  18. Nuclear instrumentation for the industrial measuring systems

    International Nuclear Information System (INIS)

    Normand, S.

    2010-01-01

    This work deals with nuclear instrumentation and its application to industry, power plant fuel reprocessing plant and finally with homeland security. The first part concerns the reactor instrumentation, in-core and ex-core measurement system. Ionization Uranium fission chamber will be introduced with their acquisition system especially Campbell mode system. Some progress have been done on regarding sensors failure foresee. The second part of this work deals with reprocessing plant and associated instrumentation for nuclear waste management. Proportional counters techniques will be discussed, especially Helium-3 counter, and new development on electronic concept for reprocessing nuclear waste plant (one electronic for multipurpose acquisition system). For nuclear safety and security for human and homeland will be introduce. First we will explain a new particular approach on operational dosimetric measurement and secondly, we will show new kind of organic scintillator material and associated electronics. Signal treatment with real time treatment is embedded, in order to make neutron gamma discrimination possible even in solid organic scintillator. Finally, the conclusion will point out future, with most trends in research and development on nuclear instrumentation for next years. (author) [fr

  19. Operation safety of complex industrial systems

    International Nuclear Information System (INIS)

    Zwingelstein, G.

    1999-01-01

    Zero fault or zero risk is an unreachable goal in industrial activities like nuclear activities. However, methods and techniques exist to reduce the risks to the lowest possible and acceptable level. The operation safety consists in the recognition, evaluation, prediction, measurement and mastery of technological and human faults. This paper analyses each of these points successively: 1 - evolution of operation safety; 2 - definitions and basic concepts: failure, missions and functions of a system and of its components, basic concepts and operation safety; 3 - forecasting analysis of operation safety: reliability data, data-banks, precautions for the use of experience feedback data; realization of an operation safety study: management of operation safety, quality assurance, critical review and audit of operation safety studies; 6 - conclusions. (J.S.)

  20. An Industrial Control System for the Supervision of the CERN Electrical Distribution Network

    CERN Document Server

    Poulsen, S

    1999-01-01

    CERN operates a large distribution network for the supply of electricity to the particle accelerators, experiments and the associated infrastructure. The distribution network operates on voltage levels from 400 V to 400 kV with a total yearly consumption of near to 1000 GWh. In the past, the laboratory has developed an in-house control system for this network, using the technologies applied to the accelerator control system. However, CERN is now working on a project to purchase, configure and install an industrial Electrical Network Supervisor (ENS). This is a state-of-the-art industrial control system completely developed and supported by an external contractor. The system - based on a scalable and distributed architecture - will allow the installation to be performed gradually, and will be tested while the existing system is fully operational. Ultimately, the complete electrical distribution network will be supervised with this new system, the maintenance and further development of which will be the complet...

  1. The Sustainable Development of Industry Clusters: Emergent Knowledge Networks and Socio Complex Adaptive Systems

    Directory of Open Access Journals (Sweden)

    Susu Nousala

    2009-10-01

    Full Text Available In a highly competitive global economy the development of sustainable, innovative responses from Industry is now vital. Many industries globally need to respond rather than react to current economic climate through sustainable (economically and environmentally development. The steel industry is a critical player in the urban landscape. Like many industries, small, medium enterprises (SMEs are vital players within the steel industry supply chain. The Australian SME steel housing sector (based in rural and regional areas are still developing systemic capabilities with the aim of realizing its full potential. The question of an effective sustainable industry is much larger than any one player. This paper aims to present a proposed methodological approach for sustainable cluster development based on previous industry wide investigations. Through the lens of scalability of a socio complex adaptive system, SME development becomes arguably the most significant player with regards to industry cluster development. By starting with SME development it's possible to build an understanding of a simultaneous two layered approach, "bottom up – top down" whilst including a very diversified group.

  2. evaluation of a modified passive solar housing system for poultry

    African Journals Online (AJOL)

    User

    The hourly efficiency of the solar brick passive system was estimated at about 78.42% in a day of May and ... to high cost and unavailability of kerosene in most developing .... sulted in intermittent rainfall, cloud cover and sunshine. From the ...

  3. Improving Compressed Air System Performance: A Sourcebook for Industry

    Energy Technology Data Exchange (ETDEWEB)

    2003-11-01

    NREL will produce this sourcebook for DOE's Industrial Technologies Office as part of a series of documents on industrial energy equipment. The sourcebook is a reference for industrial compressed air system users, outlining opportunities to improve system efficiency.

  4. The family house control system based on Raspberry Pi

    Directory of Open Access Journals (Sweden)

    Sysala Tomas

    2017-01-01

    Full Text Available The article deals with the design and implementation of a smart household based on simple wireless modules, which are monitoring (collecting data and controlling smart household supporting devices. The central unit processes measured parameters, and in relation to resulting values, a pre-set action is performed. Those actions variety can be configured by user via the user interface so that a set of smart rules for reaction on by household devices generated stimuli or problems can be created. That all together composes a control system based on Raspberry Pi, which manages indoor and outdoor temperature measurement, the lighting control, RF transmitter, jalousie, motion sensor control etc. There is a GUI for a PC and for a mobile phone as a part of that system.

  5. Optimal design of integrated CHP systems for housing complexes

    International Nuclear Information System (INIS)

    Fuentes-Cortés, Luis Fabián; Ponce-Ortega, José María; Nápoles-Rivera, Fabricio; Serna-González, Medardo; El-Halwagi, Mahmoud M.

    2015-01-01

    Highlights: • An optimization formulation for designing domestic CHP systems is presented. • The operating scheme, prime mover and thermal storage system are optimized. • Weather conditions and behavior demands are considered. • Simultaneously economic and environmental objectives are considered. • Two case studies from Mexico are presented. - Abstract: This paper presents a multi-objective optimization approach for designing residential cogeneration systems based on a new superstructure that allows satisfying the demands of hot water and electricity at the minimum cost and the minimum environmental impact. The optimization involves the selection of technologies, size of required units and operating modes of equipment. Two residential complexes in different cities of the State of Michoacán in Mexico were considered as case studies. One is located on the west coast and the other one is in the mountainous area. The results show that the implementation of the proposed optimization method yields significant economic and environmental benefits due to the simultaneous reduction in the total annual cost and overall greenhouse gas emissions

  6. Microbial dynamics during industrial rearing, processing, and storage of the tropical house cricket (Gryllodes sigillatus) for human consumption.

    Science.gov (United States)

    Vandeweyer, Dries; Wynants, Enya; Crauwels, Sam; Verreth, Christel; Viaene, Nikolaas; Claes, Johan; Lievens, Bart; Van Campenhout, Leen

    2018-04-06

    In this study, the microbiota during industrial rearing, processing, and storage of the edible tropical house cricket, Gryllodes sigillatus , was investigated. To this end, samples were analyzed of the cricket feed, before feeding as well as taken from the cages, and the crickets during rearing, after harvest, and after processing into frozen, oven-dried, and smoked and subsequently oven-dried end products. Although the feed contained lower microbial numbers than the crickets, both were dominated by the same species-level operational taxonomic units as determined by Illumina Miseq sequencing. They corresponded, among others, to members of Porphyromonadaceae, Fusobacterium , Parabacteroides and Erwinia The harvested crickets contained high microbial numbers, but none of the investigated food pathogens Salmonella spp., Listeria monocytogenes , Bacillus cereus , and coagulase-positive staphylococci. However, some possible mycotoxin-producing fungi were isolated from the crickets. A post-harvest heat treatment, shortly boiling the crickets, reduced microbial numbers, but an endospore load of 2.4 log cfu/g remained. After processing, an increase in microbial counts was observed for dried and smoked plus dried crickets. Additionally, in the smoked plus dried crickets, a high abundance of a Bacillus sp. was observed. Considering the possible occurrence of food-pathogenic species from this genus, it is advised to apply a heat treatment which is sufficient to eliminate spores. Nevertheless, the microbial numbers remained constant over a six-month storage period, frozen (frozen end product) or at ambient temperature (oven-dried and smoked plus dried end products). Importance. The need for sustainable protein sources has led to the emergence of a new food sector, producing and processing edible insects into foods. However, insight into the microbial quality of this new food and into the microbial dynamics during rearing, processing and storage of edible insects is still

  7. Industry consultation on grid connection of small PV systems

    Energy Technology Data Exchange (ETDEWEB)

    Knight, J.; Thorneycroft, J.; Cotterell, M.; Gambro, S.

    2000-07-01

    This report presents the results of consultation within the PV industry and the electricity supply industry concerning guidelines for the connection of small PV systems to the electricity network. (author)

  8. 75 FR 1632 - Public Housing Assessment System (PHAS): Asset Management Transition Year 2 Information

    Science.gov (United States)

    2010-01-12

    ... accounting under asset management, also known as ``Transition Year 2.'' FOR FURTHER INFORMATION CONTACT: The... System (PHAS): Asset Management Transition Year 2 Information AGENCY: Office of the Assistant Secretary... by HUD under the Public Housing Management Assessment Program (PHMAP), the regulations for which are...

  9. Bacterial contamination of table eggs and the influence of housing systems

    NARCIS (Netherlands)

    Reu, de K.; Messens, W.; Heyndrickx, M.; Rodenburg, T.B.; Uyttendaele, M.; Herman, L.

    2008-01-01

    With the introduction of alternative housing systems for laying hens in the EU, recent research has focussed on the bacterial contamination of table eggs, e.g. eggshell and egg content contamination. Contamination of eggshells with aerobic bacteria is generally higher for nest eggs from non-cage

  10. 76 FR 20366 - Changes to the Public Housing Assessment System (PHAS): Management Operations Scoring Notice

    Science.gov (United States)

    2011-04-12

    ... Housing Assessment System (PHAS): Management Operations Scoring Notice AGENCY: Office of the Assistant... Management Operations interim scoring notice. The document inadvertently omitted a word with respect to the... INFORMATION: I. Background The proposed management operations scoring information was published on August 21...

  11. The House System: Evaluating Its Role in the Experience of Business Students

    Science.gov (United States)

    Antoniadou, Marilena

    2017-01-01

    This paper presents a case study of students' experiences of the House system, an innovative scheme introduced for business students, aiming to enhance student experience. The findings are based on a survey of 350 students and 4 group interviews. Analysis of the findings, both statistical and qualitative, indicated perceived clear benefits for the…

  12. Using Pareto Analysis with Trend Analysis: Statistical Techniques to Investigate Incident Reports within a Housing System

    Science.gov (United States)

    Luna, Andrew L.

    1998-01-01

    The purpose of this study was to determine trends and difficulties concerning student incident reports within the residence halls as they relate to the incident reporting system from the Department of Housing and Residential Life at a Southeastern Doctoral I Granting Institution. This study used the frequency distributions of each classified…

  13. Managing In-House Development of a Campus-Wide Information System

    Science.gov (United States)

    Shurville, Simon; Williams, John

    2005-01-01

    Purpose: To show how a combination of hard and soft project and change management methodologies guided successful in-house development of a campus-wide information system. Design/methodology/approach: A case study of the methodologies and management structures that guided the development is presented. Findings: Applying a combination of the…

  14. Bodems voor vrijloopstallen = Bedding materials in loose housing systems for dairy cattle

    NARCIS (Netherlands)

    Dooren, van H.J.C.; Galama, P.J.; Smits, M.C.J.

    2012-01-01

    Sand, Compost and 'toemaak' (a mixture of reed, dredge and manure) had been used as bedding material for loose housing systems on three dairy research farms of Wageningen UR Livestock Research. Gaseous emissions, animal behavior and health and food safety aspects were measured and reported together

  15. Cow behaviour and managerial aspects of fully automatic milking in loose housing systems

    NARCIS (Netherlands)

    Ketelaar-de Lauwere, C.C.

    1999-01-01

    In this study of cow behaviour and managerial aspects of fully automatic milking, the emphasis was on implementing automatic milking systems (AMS) in cubicle houses in a way that suits cows and farmer. The starting points of the research were that the cows would visit the AMS voluntarily

  16. Barriers to installing innovative energy systems in existing housing stock identified

    NARCIS (Netherlands)

    Hoppe, Thomas

    2013-01-01

    Several barriers to upgrading existing social housing with innovative energy systems (IES) have been identified by a study of eight large-scale renovation projects in the Netherlands. These include a lack of trust between stakeholders, opposition from tenants on grounds of increased costs or delays,

  17. Particulate matter emission from livestock houses: measurement methods, emission levels and abatement systems

    NARCIS (Netherlands)

    Winkel, Albert

    2016-01-01

    Animal houses are extremely dusty environments. Airborne particulate matter (PM) poses a health threat not only to the farmer and the animals, but, as a result of emissions from ventilation systems, also to residents living in livestock farming areas. In relation to this problem, the objectives

  18. Energy saving house utilizing photovoltaic system. 3; Taiyoko hatsuden wo donyushita sho energy jutaku. 3

    Energy Technology Data Exchange (ETDEWEB)

    Itsumi, J. [Kumamoto Institute of Technology, Kumamoto (Japan)

    1997-11-25

    Various measurements are conducted in an energy-efficient house equipped with a photovoltaic power generation system and actually lived in by people, and matching between the household load and photovoltaic power generation, and the consumption of power, are examined. As the result investigation of power consumption in the house, it is found that 13.31kWh is consumed in the daytime in winter, and 14.15kWh in summer. Thirty-two 153W modules are used, and they produce 12.74kWh in four hours on a fine summer day, which amount nearly satisfies the demand of the household. As for the records during a year beginning in May, 1996, it is found that an annual amount of 4326kWh was generated, with 68% being surplus and 32% consumed for the household. Details of the household consumption were that 49.2% was consumed for house heating and cooling and 34.1% for cooking, the two in total occupying more than 80% of the whole household consumption. Energy-saving behavior is evaluated by comparing the energy-efficient house with some ordinary residential houses in Kumamoto City, and it is found that there is a yearly difference of 104,310 yen in electricity bill or 47% in energy saving effect. 5 refs., 4 figs., 4 tabs.

  19. FEMAN: Fuzzy-Based Energy Management System for Green Houses Using Hybrid Grid Solar Power

    Directory of Open Access Journals (Sweden)

    Abdellah Chehri

    2013-01-01

    Full Text Available The United Nations has designated the year 2012 as the international year of sustainable energy. Today, we are seeing a rise in global awareness of energy consumption and environmental problems. Many nations have launched different programs to reduce the energy consumption in residential and commercial buildings to seek lower-carbon energy solutions. We are talking about the future green and smart houses. The subject of smart/green houses is not one of “why,” but rather “how,” specifically: “how making the future house more energy efficient.” The use of the renewable energy, the technology and the services could help us to answer this question. Intelligent home energy management is an approach to build centralized systems that deliver application functionality as services to end-consumer applications. The objective of this work is to develop a smart and robust controller for house energy consumption with maximizing the use of solar energy and reducing the impact on the power grid while satisfying the energy demand of house appliances. We proposed a fuzzy-based energy management controller in order to reduce the consumed energy of the building while respecting a fixed comfort.

  20. Methods of Improving Water Treatment Systems for Individual Residential Houses

    Directory of Open Access Journals (Sweden)

    Pavlov Sergey

    2016-01-01

    Full Text Available One of hot topics for ecological management is sewage treatment today in places where there is no sewerage. The volume of country construction in territories, which are not connected to the public sewage system increasing nowadays. Therefore, problem of wastewater treatment take place. Currently, there are a lot of different designs of local waste treatment plants is offered to consumers. However, a large number of negative reviews indicate serious shortcomings in most of the local plants offered in the market. The purpose of this paper is the proposal of improvement of the most common local treatment plants in Russia.

  1. Tech House

    Science.gov (United States)

    1978-01-01

    The members of the Swain family- Dr. Charles "Bill" Swain, wife Elaine, daughter Carol, 17, son "Chuck", 12, and dog Susie have an interesting assignment. They are active participants in an important NASA research program involving the application of space-age technology to home construction. b' Transplanted Floridians, the Swains now reside in NASA's Tech House, loatedat Langley Research Center, Hampton, Virginia. Their job is to use and help evaluate the variety of advanced technology systems in Tech House. A contemporary three-bedroom home, Tech House incorporates NASA technology, the latest commercial building techniques and other innovations, all designed to reduce energy and water consumption and to provide new levels of comfort, convenience, security and fire safety. Tech House equipment performed well in initial tests, but a house is not a home until it has people. That's where the Swains come in. NASA wants to see how the various systems work under actual living conditions, to confirm the effectiveness of the innovations or to determine necessary modifications for improvement. The Swains are occupying the house for a year, during which NASA engineers are computer monitoring the equipment and assembling a record of day-to-day performance. . Tech House is a laboratory rather than a mass production prototype, but its many benefits may influence home design and construction. In a period of sharply rising utility costs, widespread adoption of Tech House features could provide large-scale savings to homeowners and potentially enormous national benefit in resources conservation. Most innovations are aerospace spinoffs: Some of the equipment is now commercially available; other systems are expected to be in production within a few years. Around 1980, a Tech House-type of home could be built for $45-50,000 (1 976 dollars). It is estimated that the homeowner would save well over $20,000 (again 1976 dollars) in utility costs over the average mortgage span of 20 years.

  2. Influence of age and housing systems on properties of tibia and humerus of Lohmann White hens1: Bone properties of laying hens in commercial housing systems.

    Science.gov (United States)

    Regmi, P; Nelson, N; Haut, R C; Orth, M W; Karcher, D M

    2017-10-01

    This study was aimed at analyzing bone properties of Lohmann White hens in different commercial housing systems at various points throughout production. Pullets reared in conventional cages (CC) were either continued in CC or moved to enriched colony cages (EN) at 19 weeks. Pullets reared in cage-free aviaries (AV) were moved to AV hen houses. Bone samples were collected from 60 hens at each of 18 and 72 wk and 30 hens at 26 and 56 wk from each housing system. Left tibiae and humeri were broken under uniform bending to analyze mechanical properties. Cortical geometry was analyzed using digital calipers at the fracture site. Contralateral tibiae and humeri were used for measurement of ash percentage. AV pullets' humeri had 41% greater cortical areas, and tibiae had 19% greater cortical areas than the CC pullets (P < 0.05). Average humeri diameter was greater in AV pullets than in CC pullets (P < 0.05), whereas the tibiae outer dimensions were similar. Aviary pullet bones had greater stiffness (31 and 7% greater for tibiae and humeri, respectively) and second moment of inertia (43 and 13% greater for tibiae and humeri, respectively) than CC pullets (P < 0.05). The differences between bones of AV and CC hens persisted throughout the laying cycle. Moving CC pullets to EN resulted in decreased endosteal resorption in humeri, evident by a 7.5% greater cortical area in the EN hens (P < 0.05). Whole-bone breaking strength did not change with age. Stiffness increased with age, while energy to failure decreased in both the tibiae and humeri. These results indicated that tibiae and humeri of laying hens become stiffer but lose toughness and become brittle with age. Furthermore, AV and EN systems can bring positive changes in mechanical and structural properties that are more pronounced in the humerus than the tibia. © 2017 Poultry Science Association Inc.

  3. Model-predicted ammonia emission from two broiler houses with different rearing systems

    Directory of Open Access Journals (Sweden)

    Nilsa Duarte Silva Lima

    2015-10-01

    Full Text Available Ammonia (NH3 emissions from broiler production can affect human and animal health and may cause acidification and eutrophication of the surrounding environment. This study aimed to estimate ammonia emissions from broiler litter in two systems of forced ventilation, the tunnel ventilation (TV and the dark house (DH. The experiment was carried out on eight commercial broiler houses, and the age of the birds (day, d, pH and litter temperature were recorded. Broilers were reared on built-up wood shaving litter using an average flock density of 14 bird m–2. Temperature and relative humidity inside the broiler houses were recorded in the morning during the grow-out period. A factorial experimental design was adopted, with two types of houses, four replicates and two flocks with two replicates each. A deterministic model was used to predict ammonia emissions using the litter pH and temperature, and the day of grow-out. The highest litter temperature and pH were found at 42 d of growth in both housing systems. Mean ambient air temperature and relative humidity did not differ in either system. Mean model predicted ammonia emission was higher in the DH rearing system (5200 mg NH3 m−2h−1 at 42 d than in the TV system (2700 mg NH3m−2 h−1 at 42 d. TV presented the lowest mean litter temperature and pH at 42 d of growth. In the last week of the broilers’ grow-out cycle, estimated ammonia emissions inside DH reached 5700 mg m−2h−1 in one of the flocks. Ammonia emissions were higher inside DH, and they did not differ between flocks. Assuming a broiler market weight in Brazil of close to 2 kg, ammonia emissions were equivalent to 12 g NH3 bird-marketed−1. Model-predicted ammonia emissions provided comprehensible estimations and might be used in abatement strategies for NH3 emission.

  4. Lifecycle Industry GreenHouse gas, Technology and Energy through the Use Phase (LIGHTEnUP) – Analysis Tool User’s Guide

    Energy Technology Data Exchange (ETDEWEB)

    Morrow, William R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Shehabi, Arman [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Smith, Sarah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

    2016-06-22

    The LIGHTEnUP Analysis Tool (Lifecycle Industry GreenHouse gas, Technology and Energy through the Use Phase) has been developed for The United States Department of Energy’s (U.S. DOE) Advanced Manufacturing Office (AMO) to forecast both the manufacturing sector and product life-cycle energy consumption implications of manufactured products across the U.S. economy. The tool architecture incorporates publicly available historic and projection datasets of U.S. economy-wide energy use including manufacturing, buildings operations, electricity generation and transportation. The tool requires minimal inputs to define alternate scenarios to business-as-usual projection data. The tool is not an optimization or equilibrium model and therefore does not select technologies or deployment scenarios endogenously. Instead, inputs are developed exogenous to the tool by the user to reflect detailed engineering calculations, future targets and goals, or creative insights. The tool projects the scenario’s energy, CO2 emissions, and energy expenditure (i.e., economic spending to purchase energy) implications and provides documentation to communicate results. The tool provides a transparent and uniform system of comparing manufacturing and use-phase impacts of technologies. The tool allows the user to create multiple scenarios that can reflect a range of possible future outcomes. However, reasonable scenarios require careful attention to assumptions and details about the future. This tool is part of an emerging set of AMO’s life cycle analysis (LCA) tool such as the Material Flows the Industry (MFI) tool, and the Additive Manufacturing LCA tool.

  5. THE USE OF PASSIVE SOLAR HEATING SYSTEMS AS PART OF THE PASSIVE HOUSE

    Directory of Open Access Journals (Sweden)

    Bryzgalin Vladislav Viktorovich

    2018-05-01

    Full Text Available Subject: systems of passive solar heating, which can, without the use of engineering equipment, capture and accumulate the solar heat used for heating buildings. Research objectives: study of the possibility to reach the passive house standard (buildings with near zero energy consumption for heating in climatic conditions of Russia using the systems of passive solar heating in combination with other solutions for reduction of energy costs of building developed in the past. Materials and methods: search and analysis of literature, containing descriptions of various passive solar heating systems, examples of their use in different climatic conditions and the resulting effect obtained from their use; analysis of thermophysical processes occurring in these systems. Results: we revealed the potential of using the solar heating systems in the climatic conditions of parts of the territories of the Russian Federation, identified the possibility of cheaper construction by the passive house standard with the use of these systems. Conclusions: more detailed analysis of thermophysical and other processes that take place in passive solar heating systems is required for creation of their computational models, which will allow us to more accurately predict their effectiveness and seek the most cost-effective design solutions, and include them in the list of means for achieving the passive house standard.

  6. Interfacing industrial process control systems to LEP/LHC

    International Nuclear Information System (INIS)

    Rabany, M.

    1992-01-01

    Modern industrial process control systems have developed to meet the needs of industry to increase the production while decreasing the costs. Although particle accelerators designers have pioneered in control systems during the seventies, it has now become possible to them to profit of industrial solutions in substitution of, or in complement with the more traditional home made ones. Adapting and integrating such industrial systems to the accelerator control area will certainly benefit to the field in terms of finance, human resources and technical facilities offered off-the-shelf by the widely experienced industrial controls community; however this cannot be done without slightly affecting the overall accelerator control architecture. The paper briefly describes the industrial controls arena and takes example on an industrial process control system recently installed at CERN to discuss in detail the related choices and issues. (author)

  7. Labor processes within a commodity system :a comparative study of workers in apple packing houses

    OpenAIRE

    Bello Barros, Rosario

    1993-01-01

    This study is a comparative analysis of how two forms of capitalist production intersect with gender to shape the labor process in apple packing houses of Virginia, United States and the VI Region, Chile. It illustrates how differences in growers' production systems, as well as traditional undervaluation of women's work, shape the organization of the apple-packing workplace. A theoretical framework based on the notion of labor processes was developed to study growers' farming systems and t...

  8. Management of Housing and Public Services of a City: the System and Simulation Approach

    Directory of Open Access Journals (Sweden)

    Bril Mykhailo S.

    2017-12-01

    Full Text Available The article is dedicated to the development of models for management of housing and communal services of a city on the basis of the system approach and simulation modeling. A review of the existing models of urban systems is carried out, their advantages and disadvantages are shown. With the use of the methods of simulation and scenario modeling, a simulation model for management of housing and communal services of a city has been developed, which makes it possible to predict the dynamics of the main socio-economic indicators of development of a city. On the basis of the model, the forecast indicators were simulated according to various scenarios for distributing financial resources for the renovation and maintenance of housing facilities of a city. The main criterion for effectiveness of the scenarios is the level of housing provision for the population. The models built can be used for making managerial decisions by local government authorities as well as in elaborating programs for the urban social and economic development.

  9. On the feasibility of device fingerprinting in industrial control systems

    NARCIS (Netherlands)

    Caselli, M.; Hadziosmanovic, D.; Zambon, Emmanuele; Kargl, Frank; Luiijf, Eric; Hartel, Pieter H.

    2013-01-01

    As Industrial Control Systems (ICS) and standard IT networks are becoming one heterogeneous entity, there has been an increasing effort in adjusting common security tools and methodologies to fit the industrial environment. Fingerprinting of industrial devices is still an unexplored research field.

  10. 46 CFR 58.60-9 - Industrial systems: Design.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Industrial systems: Design. 58.60-9 Section 58.60-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU...

  11. 46 CFR 58.60-7 - Industrial systems: Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Industrial systems: Piping. 58.60-7 Section 58.60-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU...

  12. 46 CFR 58.60-5 - Industrial systems: Locations.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Industrial systems: Locations. 58.60-5 Section 58.60-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS Industrial Systems and Components on Mobile Offshore Drilling Units (MODU...

  13. In-House Communication Support System Based on the Information Propagation Model Utilizes Social Network

    Science.gov (United States)

    Takeuchi, Susumu; Teranishi, Yuuichi; Harumoto, Kaname; Shimojo, Shinji

    Almost all companies are now utilizing computer networks to support speedier and more effective in-house information-sharing and communication. However, existing systems are designed to support communications only within the same department. Therefore, in our research, we propose an in-house communication support system which is based on the “Information Propagation Model (IPM).” The IPM is proposed to realize word-of-mouth communication in a social network, and to support information-sharing on the network. By applying the system in a real company, we found that information could be exchanged between different and unrelated departments, and such exchanges of information could help to build new relationships between the users who are apart on the social network.

  14. HYBRID COOLING SYSTEM FOR INDUSTRIAL APPLICATION

    African Journals Online (AJOL)

    ES Obe

    1980-03-01

    Mar 1, 1980 ... and plastic-ware production. ... molds in glass and plastic forming processes. ... increased more than five times over that achieved by using the gas (air) ... industrial manufacture. 2. .... commercial forming machine with the.

  15. Egg quality in layers housed in different production systems and submitted to two environmental conditions

    Directory of Open Access Journals (Sweden)

    JAD Barbosa Filho

    2006-03-01

    Full Text Available The production system using cages is a highly polemical issue in Europe, because of the space restriction imposed to laying hens. It is considered that the cage system might compromise important comfort movements, welfare and egg quality. This study evaluated egg quality and welfare of two strains of hens housed in a conventional system (battery laying cages or litter system with nest and perches, and submitted to heat stress or comfort conditions. Two groups of 20 birds (10 Hy-line W36 and 10 Hy-line Brown were submitted to two environmental conditions (26°C and 60% RH or 35°C and 70% RH and two housing systems (cages or litter in the early production phase. Egg quality was analyzed based on egg weight, eggshell thickness, specific gravity, and Haugh units. Yolk and shell contamination by Salmonella sp was also assessed. A significant (p<0.05 reduction in quality parameters was observed in eggs produced by laying hens under heat stress, mainly in the birds housed in cages.

  16. Security in In-House Developed Information Systems: The Case of Tanzania

    Directory of Open Access Journals (Sweden)

    Magreth Mushi

    2012-04-01

    Full Text Available In this 21st century, the world is moving more and more into the information economy; and information held by organization's information systems is among the most valuable assets in the organization's care and is considered a critical resource, enabling the organizations to achieve their strategic objectives. In-house developed information systems meant to enable organizations to achieve their strategic objectives, are on the increase and security has become a major concern in recent years. Hackers are using new techniques to gain access to sensitive data, disable information systems and administer other malicious activities aimed at the information systems. The need to secure an information system is imperative for use in today's world. Until recently, information systems security was an afterthought; developers were typically focused on functionality and features, waiting to implement security at the end of development. This approach to information systems security has proven to be disastrous because vulnerabilities have gone undetected allowing information systems to be attacked and damaged. A survey done in three (3 organizations in Tanzania has proved that most of the information systems developers have drawn their background from traditional systems development without the sense of implementing security in the early stage of information system development. This paper attempts to identify in-house developed information system's security deficiencies and related risks to organizations, the paper also attempt to establish technique that can be used to detect those deficiencies. Lastly the paper provide guidance that can be used by organizations to mitigate the risks.

  17. STIMULATION OF CONSTRUCTION OF AFFORDABLE HOUSING BY REFORMATION OF A CONSTRUCTION COMPLEX MANAGEMENT SYSTEM

    Directory of Open Access Journals (Sweden)

    BRONEVYTSKYI S. P.

    2015-10-01

    Full Text Available Purpose. Development of offers on stimulation of construction of affordable housing by reformation of a construction complex management system. Methodology. The revelation of the problems of planning of construction in large cities. The analysis of forming of structure of a build complex management in soviet times and in a transitional period. The revelation of the modern, actual, socio-economic problems of the construction activity management. Proposition on the improvement of methods of construction management in cities of Ukraine. Results. The methods of a construction complex management in countries with a market economy as for building of affordable housing are shown. Originality. In composition of a town-planning documentations, except for the norms of the common use of territories of city (density of population of micro region, the maximum parameters of a construction examining of land areas are proposed to determine: building percent and coefficient of maximum superficial area. Practical value. The principle of management and organization of construction is norms of a build use of territories for building of mass affordable housing for funds of population and investors while providing of the comfort of housing in accordance with state construction norms.

  18. An Electronic Worker Service System of the Pig House Based on ATmega16

    Science.gov (United States)

    Li, Liu-An; Jin, Tian-Ming; Yu, Ya-Ping; Zhang, Guo-Qiang; Hong, Tao

    Pork is very important for people in daily life. Quality of livestock environment is closely related to the growth of animals. To improve environmental quality, the paper designed an electronic worker service system of the pig house based on ATmega16, which consisted of 6 detection modules, wireless data collecting, GSM, time circuit, display, anti-th alarm and music player, etc. A small LAN was constructed by wireless transceiver module to test and collect data of temperature, humidity and harmful gas concentration in the pig house. If one detection point exists that harmful pollutant gases concentration exceeds the standard value, GSM module took a message for livestock farmers, so that farmers can promptly arrive at the pig house to ventilate or deal with manure in the pig house, which can effectively prevent from bad things. Time of pyroelectric detector deployment can be freely set, and intrusion information was timely sent to the users. The anti-th alarm function was achieved by the auxiliary light. The music playing module is open by timer module in order to soothing pigs' life state. All are suitable for small farms and can save human resources.

  19. Dairy cows welfare quality in tie-stall housing system with or without access to exercise

    Science.gov (United States)

    2013-01-01

    Background Tie-stall housing of dairy cows is used extensively worldwide, despite of the welfare concerns regarding the restriction of voluntary movement and limitation of expression of the cows’ natural behaviour. The aim of this study was to compare the welfare quality of dairy cows kept in two types of tie-stall housing systems: with regular outdoor exercise and without access to exercise. In addition, the study investigated the relationship between different welfare measures of dairy cows kept in tie-stalls. Methods 3,192 lactating cows were assessed using the Welfare Quality® assessment protocol for cattle in 80 commercial dairy farms, half of the farms providing outdoor access for the animals to exercise. The descriptive statistical indicators were determined for the assessed measures and for the welfare criteria and principle scores. The data obtained in the two housing types were compared and the correlation coefficients were calculated between the different welfare measures. Results The significant differences found between the two housing systems for the majority of the animal based measures indicate the positive effect of exercise on the welfare of tethered cows. Many of the animal welfare parameters correlated with each other. For the farms allowing the cows’ turnout in a paddock, pasture or both, the mean scores for the welfare criteria and principles were higher than for the farms with permanent tethering of the cows, except the criteria absence of prolonged hunger and expression of social behaviours. The lowest scores were obtained for the criterion positive emotional state, in both housing systems. With regard to the overall classification, none of the farms were considered excellent. In the not classified category were only farms with all-year-round tethering of the animals and in the enhanced category only farms where the cows had outdoor access. Conclusions The welfare quality of the investigated dairy cows was significantly better in the

  20. Effects of housing system on welfare and milk yield and quality of Girgentana goats

    Directory of Open Access Journals (Sweden)

    G. Leto

    2011-03-01

    Full Text Available In the past years, in Sicily, goats of the Girgentana breed have decreased so drastically in number that they risked extinction. Among the causes, particular blame can be laid at the traditional housing system, in which the goats, after coming back from pasture, were tethered in individual wooden stalls. Such a system is still considered necessary by breeders in order to avoid aggressive and harmful behaviour on the part of the animals, due to the presence of their long horns (Giaccone et al., 1994. This belief negatively interferes with the action recently initiated for the recovery and regeneration of the breed (Portolano et al., 2002; in fact, the tie stalls housing, increasing manpower, limits the increase in size in herds of Girgentana goats...

  1. 78 FR 58153 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

    Science.gov (United States)

    2013-09-23

    ... American Industry Classification System Based Federal Wage System Wage Surveys AGENCY: U.S. Office of... in Federal Wage System wage survey industry regulations with the 2012 NAICS revisions published by.... Applicability date: This rule applies for local wage surveys beginning on or after February 21, 2014. FOR...

  2. Justification of system of assessment of ecological safety degree of housing construction objects

    Science.gov (United States)

    Kankhva, Vadim

    2017-10-01

    In article characteristics and properties of competitiveness of housing construction objects are investigated, criteria and points of national systems of ecological building’s standardization are structured, the compliance assessment form on stages of life cycle of a capital construction project is developed. The main indicators of level of ecological safety considering requirements of the international ISO standards 9000 and ISO 14000 and which are based on the basic principles of general quality management (TQM) are presented.

  3. BIM-Integration of solar thermal systems in early housing design

    OpenAIRE

    Bonilla Castro, Alejandro; García Alvarado, Rodrigo

    2017-01-01

    Abstract: This paper sets a methodology to integrate solar thermal systems in BIM-software for the early architectural design of single houses in Concepción, Chile, using parametric families, programming in Dynamo, energy calculation with LadyBug and piping design in MEP. The results obtained allowed to select products, insert and adapts automatically the parametric designs into the model, as well as to identify changes in the type and number of solar components when the solar orientation of ...

  4. Effects of ambient temperature, feather cover, and housing system on energy partitioning and performance in laying hens

    NARCIS (Netherlands)

    Krimpen, van M.M.; Binnendijk, G.P.; Anker, van den I.; Heetkamp, M.J.W.; Kwakkel, R.P.; Brand, van den H.

    2014-01-01

    Environmental factors, such as ambient temperature (T), feather cover (FC), and housing system (HS), probably affect energy requirements of laying hens. Using a 3 × 2 × 2 factorial arrangement, interaction effects of T (11, 16, and 21°C), FC (100 and 50%), and HS (cage and floor housing) on energy

  5. A heating system for piglets in farrowing house using waste heat from biogas engine

    Directory of Open Access Journals (Sweden)

    Payungsak Junyusen

    2008-12-01

    Full Text Available The aim of this study is to design and test a heating system for piglets in farrowing house by utilising the waste heat from a biogas engine as a heat source. The study was separated into three parts: the study on the biogas combined heat and power plant, the investigation on the properties of the heat panel, and the installation and testing of the heating system. From the experiment, the condition producing 60 kW of electrical power was a proper one, in which electrical efficiency and specific fuel consumption were 14% and 1.22 m3/kWh respectively. Generating both electricity and heat increased the overall efficiency to 37.7% and decreased the specific fuel consumption to 0.45 m3/kWh. The heat panel, which was made of a plastic material, had a thermal conductivity of 0.58 W/mC and the maximum compressive force and operating pressure of 8.1 kN and 0.35 bar respectively. The surface temperature of the panel was dependent on the inlet water temperature. When hot water of 44C was supplied into the farrowing house with room temperature of 26C, the average surface temperature was 33C. The developed heating system could provide heat for 4.3 farrowing houses. The payback period of this project was 2.5 years.

  6. The process behind the project 'houses without heating system' in Goeteborg, Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Glad, Wiktoria [Linkoeping Univ. (Sweden). The Tema Inst., Dept. of Technology and Social Change

    2003-07-01

    In the outskirts of Goeteborg, Sweden, twenty terrace houses were constructed throughout 2001. The spectacular thing about these houses is that no traditional heating systems were installed. The commercial's catch phrase is: 'Houses without heating systems'. Following this project from the beginning and through the whole process, including the long planning procedure (between 1997-1999), the professional actors (the initiator, the building proprietor, the contractor and the researchers), come into focus. This is a unique project in Sweden and has not yet had any follow-up developments. The evaluation, mainly including measurements, is being conducted by a research Inst. and will be finalised in 2003. The theoretical approach is as described in socio-technical system and focuses on social and technical components. The point of departure for the study is the social subsystem and the process behind the project which is important in understanding the final outcome. The study focuses on how and why this project was conducted. Initially, one person's ideas, inspired by building projects abroad were crucial. These ideas were then spread to a network constituting of researchers, the building proprietor, the contractor and the builders, and other consultants. The process can be described as a social innovation since a new concept for heating in buildings is introduced by focusing on the planning process and new participating actors.

  7. The process matters: cyber security in industrial control systems

    NARCIS (Netherlands)

    Hadziosmanovic, D.

    2014-01-01

    An industrial control system (ICS) is a computer system that controls industrial processes such as power plants, water and gas distribution, food production, etc. Since cyber-attacks on an ICS may have devastating consequences on human lives and safety in general, the security of ICS is important.

  8. Fuel Consumption Analysis and Optimization of a Sustainable Energy System for a 100% Renewables Smart House

    DEFF Research Database (Denmark)

    Craciun, Vasile Simion; Blarke, Morten; Trifa, Viorel

    2012-01-01

    and a feasibility study of a sustainable energy system for a 100% renewables smart house (SH) in Denmark is presented. Due to the continuous increasing penetration levels of wind and solar power in today’s energy system call for the development of high efficiency optimizations and Smart Grid (SG) enabling options....... In case of renewable energies, one main challenge is the discontinuity of generation which can be solved with planning and control optimization methods. The results of the economic analysis and the feasibility of the sustainable energy system for a 100% renewables SH show that this could be possible...

  9. PRODUCTIVITY OF LAYERS AND EGG QUALITY IN FREE RANGE AND CAGE SYSTEM OF HOUSING

    OpenAIRE

    Đ. Senčić; Danijela Butko

    2006-01-01

    The research was conducted with two groups of Lohmann Brown hybrid layers. Production of eggs lasted for 52 weeks. A control group of layers was kept in the conventional housing system, that is, in cages, while experimental group was kept in the free range system. Layers from the free range system, compared to those kept in cages, laid fewer eggs, (266:295), they consumed more feed on daily basis (129 g : 115 g), more feed per kilogram of egg weight (2.83 kg : 2.35 kg), they had higher mor...

  10. ADAPTIVE CONTROL SYSTEM OF INDUSTRIAL REACTORS

    Directory of Open Access Journals (Sweden)

    Vyacheslav K. Mayevski

    2014-01-01

    Full Text Available This paper describes a mathematical model of an industrial chemical reactor for production of synthetic rubber. During reactor operation the model parameters vary considerably. To create a control algorithm performed transformation of mathematical model of the reactor in order to obtain a dependency that can be used to determine the model parameters are changing during reactor operation.

  11. Analysis of reconfigurable assembly system framing systems in automotive industry

    Directory of Open Access Journals (Sweden)

    Md Zain Mohamad Zamri

    2017-01-01

    Full Text Available Current trend in automotive industry shows increasing demand for multiple models with lean production. Prior to that, automotive manufacturing systems evolved from mass production to flexible automation. Material handling systems and equipment in a single assembly line with multiple models require high investment but with low throughput thus making production cost relatively high. Current assembly process of side structure and undercarriage with downtime occurrence during assembly process affecting production performance (quality, cost and delivery. Manufacturing facilities should allow more flexibility and increase intelligence evolving toward novel reconfigurable assembly systems (RAS. RAS is envisaged capable of increasing factor flexibility and responsiveness by incorporating assembly jig, robot and framing, which could be next generation of world class automotive assembly systems. This project research proposes a new methodology of framework reconfigurable assembly systems principles in automotive framing systems i.e. enhance assembly process between side structure assembly and undercarriage assembly which a new RAS is capable to reconfigure the assembly processes of multiple model on a single assembly line. Simulation software (Witness will be used to simulate and validate current and proposed assembly process. RAS is expected to be a solution for rapid change in structure and for a responsively adjustable production capacity. Quality, cost and delivery are production key parameters that can be achieved by implementing RAS.

  12. 77 FR 16203 - Section 538 Guaranteed Rural Rental Housing Program 2012 Industry Forums-Open Teleconference and...

    Science.gov (United States)

    2012-03-20

    .... However, if it appears that existing capabilities may prevent the Agency from accommodating all requests... Section 515 developments. The impact of Low Income Housing Tax Credits program changes on Section 538..., genetic information, political beliefs, reprisal, or because all or part of an individual's income is...

  13. 76 FR 8712 - Section 538 Guaranteed Rural Rental Housing Program 2011 Industry Forums-Open Teleconference and...

    Science.gov (United States)

    2011-02-15

    ... existing capabilities may prevent the Agency from accommodating all requests for one form of participation... developments. The impact of Low Income Housing Tax Credits program changes on Section 538 financings. USDA... information, political beliefs, reprisal, or because all or part of an individual's income is derived from any...

  14. Gap analysis of industrial energy management systems in Slovenia

    International Nuclear Information System (INIS)

    Pusnik, Matevz; Al-Mansour, Fouad; Sucic, Boris; Gubina, A.F.

    2016-01-01

    Industrial energy management systems, which comprise software solutions, upfront services, and ongoing monitoring and management, enable industrial companies to actively manage their energy consumption and energy procurement activities. Energy management systems are usually tailored to the specific industrial needs but may offer limited functionalities, mostly as a result of different identified gaps (process simplifications, improper measurement points, a lack of motivation, etc.). A survey was conducted in order to analyse the gaps and use of energy management systems in Slovenian industry. The results of the survey presented in this paper demonstrate that the use of energy management systems in industry is recognised as a potential competitive advantage by most of the addressed companies. Furthermore, motivation was highlighted as an important prerequisite for process and structural improvements and reported to be thus far insufficiently addressed. Furthermore, the importance of strong cooperation with actors at different levels of industry, namely the executive and shop floor levels, is addressed. In the conclusion, possibilities for new opportunities in the exploitation of energy efficiency through the use of industrial energy management systems are discussed. - Highlights: • Investigating gaps and evaluation of EMS use in Slovenian industry. • Analysis based on the developed self-assessment tool 3EMT. • Existing EMS do not include all the requirements for the industrial operations. • Constructive cooperation between all stakeholders is of crucial importance.

  15. Effect of heating system using a geothermal heat pump on the production performance and housing environment of broiler chickens.

    Science.gov (United States)

    Choi, H C; Salim, H M; Akter, N; Na, J C; Kang, H K; Kim, M J; Kim, D W; Bang, H T; Chae, H S; Suh, O S

    2012-02-01

    A geothermal heat pump (GHP) is a potential heat source for the economic heating of broiler houses with optimum production performance. An investigation was conducted to evaluate the effect of a heating system using a GHP on production performance and housing environment of broiler chickens. A comparative analysis was also performed between the GHP system and a conventional heating system that used diesel for fuel. In total, 34,000 one-day-old straight run broiler chicks were assigned to 2 broiler houses with 5 replicates in each (3,400 birds/replicate pen) for 35 d. Oxygen(,) CO(2), and NH(3) concentrations in the broiler house, energy consumption and cost of heating, and production performance of broilers were evaluated. Results showed that the final BW gain significantly (P heating system did not affect the mortality of chicks during the first 4 wk of the experimental period, but the mortality markedly increased in the conventional broiler house during the last wk of the experiment. Oxygen content in the broiler house during the experimental period was not affected by the heating system, but the CO(2) and NH(3) contents significantly increased (P heating the GHP house was significantly lower (P heating system for broiler chickens.

  16. Manufacturing concepts and development trends in the industrial production of microelectromechanical systems

    Science.gov (United States)

    Schuenemann, Matthias; Grimme, Ralf; Kaufmann, Thomas; Schwaab, Gerhard; Baeder, Uwe; Schaefer, Wolfgang; Dorner, Johann

    1998-01-01

    During the past few years, remarkable affords have been made for the realization of microscale sensors, actuators and microelectromechanical system. Due to advances in solid state and micromachining technologies, significant advances in designing, fabricating and testing of microminiaturized devices have been achieved at laboratory level. However, the technical and economical realization of microelectromechanical systems is considerably impeded by the lack of satisfying device technology for their industrial production. A production concept for the industrial production of hybrid microelectromechanical systems was developed and investigated. The concept is based on the resources and requirements of medium-sized enterprises and is characterized by its flexibility. Microsystem fabrication is separated into microfabrication steps performed in-house and technological steps performed by external technology providers. The modularity of the concept allows for a gradual increase in the degree of automation and the in-house production depth, depending on market capacity and financial resources. To demonstrate the feasibility of this approach, the design and realization of a microfabrication process center, which includes tasks like transport and handling, processing, cleaning, testing and storing are discussed. Special attention is given to the supply and feeding of microparts, to the necessary magazines, trays and transport systems, to the implementation of homogeneous mechanical, environmental and information interfaces, to the employment of advanced control, scheduling, and lot tracking concepts, and to the application of highly modular and cost-efficient clean production concepts.

  17. System for monitoring an industrial or biological process

    Science.gov (United States)

    Gross, Kenneth C.; Wegerich, Stephan W.; Vilim, Rick B.; White, Andrew M.

    1998-01-01

    A method and apparatus for monitoring and responding to conditions of an industrial process. Industrial process signals, such as repetitive manufacturing, testing and operational machine signals, are generated by a system. Sensor signals characteristic of the process are generated over a time length and compared to reference signals over the time length. The industrial signals are adjusted over the time length relative to the reference signals, the phase shift of the industrial signals is optimized to the reference signals and the resulting signals output for analysis by systems such as SPRT.

  18. Different heating systems for single family house: Energy and economic analysis

    Directory of Open Access Journals (Sweden)

    Turanjanin Valentina M.

    2016-01-01

    Full Text Available The existing building stock energy consumption accounts for about 38% of final energy consumption in Republic of Serbia. 70% of that energy is consumed by residential sector, mostly for space heating. This research is addressed to the single family house building placed in the Belgrade city. The house has ground and first floor with total heating area of 130 m2 and pellet as space heating source. The aim of this paper is to evaluate energy and economic analysis for different heating systems. Several homeheating were compared: Option 1 (biomass combustion boiler using pellet as a fuel, Option 2 (gas combustion boiler and Option 3 (heat pump. The building performance was evaluated by TRNSYS 17 simulation code. Results show estimated savings using renewable energy sources. [Projekat Ministarstva nauke Republike Srbije, br. III42008

  19. A personalised and adaptive intelligent system to adjust circadian lighting for elderly housing

    DEFF Research Database (Denmark)

    Flyvholm, Anton; Sen, Sumit; Xylakis, Emmanouil

    2016-01-01

    With the rapid population ageing in Europe and in Denmark, there is an increasing interest in technologies and designs that can support the elderly citizens in sustaining well-being and health along with preventing functional decline [1]. To date, the designs of lighting systems in elderly housing...... detection, actigraphy, etc.) and c) anthropological (mood and behaviour). This way, the effect of circadian lighting on well-being, can be also documented, before this new technology can be recommended for implementation in elderly housing. A test installation is planned at “Sundhedshuset” in Albertslund...... places, nursing homes, domestic applications, and smart cities. Accelerate SSL - Innovation for Europe. SSL-Erate. Available from: http://lightingforpeople.eu/2016/wp-content/uploads/2016/03/SSLerate-3.2-3.4-v4.pdf. [3] Mobily PR, Skemp Kelley LS. (1991). Iatrogenesis in the elderly. Factors...

  20. On the genesis and accuracy of the energy consumption data of the housing industry; Zur Genese und Genauigkeit der Energieverbrauchsdaten der Wohnungswirtschaft

    Energy Technology Data Exchange (ETDEWEB)

    Vogler, Ingrid [GdW Bundesverband deutscher Wohnungs- und Immobilienunternehmen e.V., Berlin (Germany)

    2016-08-01

    Only the measured power consumption can show us whether commitment and investments in energy efficiency have been successful. We can expect before as much as we want (and expect we must, because otherwise no viable concept comes about). But only the measured consumption shows whether the plan ws successfully. This depends on the final energy, where the system losses and the type of use are included. What use is the best energy saving concept, if despite large investments of energy consumption will not fall as planned? The housing industry recorded since 2007 every two years energy consumption data, presented at the annual press conferences and published in ''Data and Trends''. The following explains, what data is collected, how the characteristic value is formed and how accurate the results are. [German] Nur der gemessene Energieverbrauch kann uns zeigen, ob Engagement und Investitionen in Energieeffizienz erfolgreich waren. Wir koennen vorher rechnen so viel wir wollen (und rechnen muessen wir, weil sonst kein tragfaehiges Konzept zustande kommt). Aber erst der gemessene Verbrauch zeigt, ob der Plan erfolgreich war. Dabei kommt es auf die Endenergie an, d.h. die Systemverluste und die Art der Nutzung sind enthalten. Was nutzt das beste Energieeinsparkonzept, wenn trotz hoher Investitionen der Energieverbrauch nicht wie geplant sinkt? Die Wohnungswirtschaft erfasst seit 2007 alle zwei Jahre Energieverbrauchsdaten, die anlaesslich der Jahrespressekonferenzen vorgestellt und in ''Daten und Trends'' veroeffentlicht werden. Im Folgenden wird erlaeutert, welche Daten erfasst werden, wie die Kennwertbildung erfolgt und wie genau die Ergebnisse sind.

  1. Field survey of a sustainable sanitation system in a residential house.

    Science.gov (United States)

    Nakagawa, Naoko; Otaki, Masahiro; Miura, Shinji; Hamasuna, Hironobu; Ishizaki, Katsuyoshi

    2006-01-01

    Sustainable sanitation is an approach for more ecological and sustainable water resources management. In this paper, we proposed one of the new integrated waste treatment systems: an "sustainable sanitation system" that includes separation of the black water from water system by a non-flushing toilet (bio-toilet), and a gray water treatment based on a biological and ecological concept. Sustainable sanitation system also converts the domestic waste to soil conditioners and fertilizers, for farmland use. As one of the case studies, Environmentally Symbiotic Housing in which people actually live using the bio-toilet for the black water treatment and the household wastewater treatment facility for the gray water was introduced. The availability of this system was investigated by analyzing the sawdust used in the bio-toilet and the quality of the effluent in the household wastewater treatment facility. As the result, the water content of the sawdust did not exceed 60% in any of the sampling points and the BOD and COD of the effluent of the household wastewater treatment facility were below 10 and 20 mg/L respectively, due to the low loading. Compared to the pollution load on the water environment created by the conventional system, it was found that the effluent of the house has a lower load than the tertiary treatment and the volume of the water consumption is 75% of the conventional system.

  2. SCADA systems in the industrial automation

    Directory of Open Access Journals (Sweden)

    Esteban Pérez-López

    2015-12-01

    Este tipo de software constituye un avance de gran impacto en la automatización industrial, ya que permite ilustrar gráficamente los procesos productivos en pantalla y crear alarmas y advertencias en tiempo real, para el manejo confiado y pleno del proceso que se desea controlar. Se presentan los ejemplos de dos industrias que han aplicado SCADA con el fin de mejorar sus procesos, obteniendo muy buenos resultados.

  3. 2001 Industry Studies: Land Combat Systems

    Science.gov (United States)

    2001-01-01

    invest in human capital, to allocate resources to R&D, to take advantage of information technology , to expand their markets beyond traditional...their efforts to broaden their markets and services. This means greater efforts to exploit information technology in order to control worldwide...three essays of foremost importance to the industry supplement the study’s depth and utility: the US Army’s transformation, information technology

  4. Improving compressed air system performance: A sourcebook for industry

    OpenAIRE

    Mckane, Aimee T.

    2003-01-01

    Compressed air is used widely throughout industry and is often considered the "fourth utility" at many facilities. Almost every industrial plant, from a small machine shop to an immense pulp and paper mill, has some type of compressed air system. In many cases, the compressed air system is so vital that the facility cannot operate without it. Plant air compressor systems can vary in size from a small unit of 5 horsepower (hp) to huge systems with more than 50,000 hp. In many industrial facili...

  5. 75 FR 80335 - Federal Government Participation in the Automated Clearing House

    Science.gov (United States)

    2010-12-22

    ... Participation in the Automated Clearing House AGENCY: Financial Management Service, Fiscal Service, Treasury...) is amending its regulation governing the use of the Automated Clearing House (ACH) system by Federal... institutions, consumer advocacy groups, industry associations, the Senate Committee on Finance and the House...

  6. Advanced Extended Plate and Beam Wall System in a Cold-Climate House

    Energy Technology Data Exchange (ETDEWEB)

    Mallay, Dave [Partnership for Home Innovation, Upper Marlboro, MD (United States); Wiehagen, Joseph [Partnership for Home Innovation, Upper Marlboro, MD (United States); Kochkin, Vladimir [Partnership for Home Innovation, Upper Marlboro, MD (United States)

    2016-01-01

    This report presents the design and evaluation of an innovative wall system. This highly insulated (high-R) light-frame wall system for use above grade in residential buildings is referred to as Extended Plate & Beam (EP&B). The EP&B design is the first of its kind to be featured in a new construction test house (NCTH) for the DOE Building America program. The EP&B wall design integrates standard building methods and common building products to construct a high-R wall that minimizes transition risks and costs to builders.

  7. (House Municipal School wind energy system: equipment performance). Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1985-05-14

    The performance of a Skyhawk horizontal axis wind system with a 3-blade, 15-ft upwind rotor is evaluated. The wind system was placed at the House Municipal School. The school is located between Tucumcari and Clovis, New Mexico and has an annual wind regime of 12 mi/h at a height of 33 ft. It was operated for 26 months and during that time has been out of service, due to breakdowns, 13 months. When the Skyhawk was operational, it generated between 100 and 700 kilowatt-hrs per month.

  8. PRODUCTIVITY OF LAYERS AND EGG QUALITY IN FREE RANGE AND CAGE SYSTEM OF HOUSING

    Directory of Open Access Journals (Sweden)

    Đ. Senčić

    2006-12-01

    Full Text Available The research was conducted with two groups of Lohmann Brown hybrid layers. Production of eggs lasted for 52 weeks. A control group of layers was kept in the conventional housing system, that is, in cages, while experimental group was kept in the free range system. Layers from the free range system, compared to those kept in cages, laid fewer eggs, (266:295, they consumed more feed on daily basis (129 g : 115 g, more feed per kilogram of egg weight (2.83 kg : 2.35 kg, they had higher mortality rate (6.80 % : 5.50 % and lower end of lay body weight (1.95 kg : 2.10 kg. Eggs from free range layers, compared to those from the cages system, had significantly (P0.05 were determined between the free range and the cages system of housing hens. Considering somewhat lower productivity and higher mortality rate of hens, higher feed consumption per kilogram of egg mass, but also better quality of eggs, profitability of egg production in the free range system will depend, to the maximum extent, on market evaluation of the production.

  9. Mouse housing system using pressurized cages intraventilated by direct-current microfans.

    Science.gov (United States)

    Martinewski, Alexandre; Correia, Caio S C; de Souza, Nívea L; Merusse, José L B

    2012-03-01

    We performed the initial assessment of an alternative pressurized intraventilated (PIV) caging system for laboratory mice that uses direct-current microfans to achieve cage pressurization and ventilation. Twenty-nine pairs of female SPF BALB/c mice were used, with 19 experimental pairs kept in PIV cages and 10 control pairs kept in regular filter-top (FT) cages. Both groups were housed in a standard housing room with a conventional atmospheric control system. For both systems, intracage temperatures were in equilibrium with ambient room temperature. PIV cages showed a significant difference in pressure between days 1 and 8. Air speed (and consequently airflow rate) and the number of air changes hourly in the PIV cages showed decreasing trends. In both systems, ammonia concentrations increased with time, with significant differences between groups starting on day 1. Overall, the data revealed that intracage pressurization and ventilation by using microfans is a simple, reliable system, with low cost, maintenance requirements, and incidence of failures. Further experiments are needed to determine the potential influence of this system on the reproductive performance and pulmonary integrity in mice.

  10. Energy reserch in the mechanical forest industry 1980-1982. Energy consumption in the manufacture of joinery products, wooden houses and in the further processing of sawn timber

    Energy Technology Data Exchange (ETDEWEB)

    Tarvainen, V.; Froeblom, J.

    1983-03-01

    Energy consumption in the mechanical forest industry in 1979 was studied by sending questionnairies to all the significant factories Information was requested on power and heat consumption and installed power in separate process phases. For background information, some aspects of the production process were also requested. The factories which answered the inquiry produced about one half of the doors and windows manufactured in 1979, one sixth of the finger jointed timber and about one third of other products in the branch. The total energy consumption in the branch was 1 556 TJ, 77% was heat. The share of the joinery industry (doors, windows and fixtures) in the total was 2/3, of which 86% was heat energy. The energy needed in the wooden house industry was 219 TJ, in planing works 137 TJ, in the gluelam industry 86 TJ, in finger jointing 76 TJ and in the production of roof trusses about 6 TJ. The investigated brances accounted for 7% of the energy consumption of the whole mechanical forest industry. The energy consumption in producing products of the same type in different factories varied very much. The differences were partially structural. However, there is considerable room for energy savings in many of the factories.

  11. Monitoring of PV systems at the Centre for Renewable Energy and Eco-Energy House

    Energy Technology Data Exchange (ETDEWEB)

    Riffat, S.B.; Omer, S.A.; Wilson, R.

    2001-07-01

    This report summarises the results of an examination of the design, installation and operation of two building integrated photovoltaic (PV) systems at the University of Nottingham. Details are given of the thin film, glass Tedlar PV system installed at the Centre, the average system performance, the installation of the monocrystalline roof slate PV system at the Eco-Energy House, and annualised costs for both systems. A holistic approach to building design, a solution to client and installer uncertainty, training to enhance the skills of related trades, the provision of guidance on the minimum acceptable standard of documentation, and the guaranteeing of a minimum level of performance by the system supplier are among the recommendations given.

  12. Symptoms and perceived indoor air quality among occupants of houses and apartments with different ventilation systems

    Energy Technology Data Exchange (ETDEWEB)

    Ruotsalainen, R.; Roennberg, R.; Majanen, A.; Seppaenen, O. (Laboratory of Heating, Ventilating and Air Conditioning, Helsinki University of Technology, Espoo (Finland)); Jaakkola, J.J.K. (Laboratory of Heating, Ventilating and Air Conditioning, Helsinki University of Technology, Espoo (Finland) Department of Public Health, University of Helsinki (Finland))

    1991-01-01

    The purpose of the study was to evaluate the occurrence of symptoms and the perception of poor indoor air quality among the occupants of houses and apartments with different ventilation systems. The study population consisted of the 473 occupants of 242 dwellings in the Helsinki metropolitan area who responded to a self-administered questionnaire (response rate 93.1%) after a two-week period of indoor air quality measurements. The symptoms of interest were those often related to poor indoor air quality including dryness or itching of the skin; dryness, irritation or itching of the eyes; nasal congestion (''blocked nose''); nasal dryness; nasal discharge (''runny nose''); sneezing; cough; breathlessness; headache or migraine; and lethargy, weakness or nausea. Perception of coldness; warmness; draught; dryness; stuffiness; and sufficiency of air exchange was also requested. The age-standardized period prevalences of the symptoms and complaints were systematically more common among the occupants of the apartments than those of the houses. The occupants of the houses with natural ventilation seemed to have more symptoms and complaints than those with balanced ventilation. However, in the apartments with blanced ventilation the occupants reported, in general, more symptoms and complaints than those with natural ventilation. (au) (9 refs.).

  13. Energy conservation and conversion of electrical heating systems in detached houses

    Energy Technology Data Exchange (ETDEWEB)

    Gustavsson, Leif; Joelsson, Anna [Ecotechnology, Department of Engineering, Physics and Mathematics, Mid Sweden University, SE-831 25 Oestersund, (Sweden)

    2007-06-15

    In this study, a Swedish house built in 1974, heated with resistance heaters was analysed. Different options for changing the heating system and electricity production were compared for this type of detached house, assuming coal-based electricity production as a reference. Changes in the fuel used, the electricity production technology, the end-use heating technology and the heat demand were analysed. The aim was to show how these different parts of the energy system interact and to evaluate the cost-effectiveness of reducing CO{sub 2} emission and primary energy use by different combinations of changes. The results showed that the CO{sub 2} emission and primary energy use could be reduced by 95 and 70%, respectively, without increased heating costs in a national economic perspective. The choice of end-use heating system had a greater influence than the energy conservation measures on the parameters studied. The energy conservation measures were less cost-effective in combination with the more energy-efficient heating systems, although the fact that they reduced the heat demand, and thus also the investment cost of the new heating system, was taken into account. (Author)

  14. Energy conservation house by photovoltaic system. 2; Taiyoko hatsuden wo donyushita sho energy jutaku. 2

    Energy Technology Data Exchange (ETDEWEB)

    Itsumi, J. [Kumamoto Institute of Technology, Kumamoto (Japan)

    1996-10-27

    Photovoltaic power generation system was once placed in excessive expectation what with a growing tendency toward environmental issues and what with vulnerability in supply and demand of energy. However, its utilization was negative because of the low energy conversion efficiency and the high cost. Then, gradually the wind shifted round to the improvement in solar cell efficiency, reduced cost, implementation of subsidizing policy by MITI, purchase of excess power by electric power companies and the amendment of the Electricity Enterprises Act, encouraging the use of the system again. In addition, with a lesson from the Great Hanshin Earthquake, the merit of the system was appreciated as a life-support power source, motivating house-builders. Earlier, the authors had reported designs of energy-saving homes, system structures of photovoltaic power generation, etc. This paper presents the power generation record of a year old system and an example of the comfortable sealed residential room environment, etc., created with the use of the power thus obtained. The annual power generation was 4,088kWh, 30% of which was used in the house and 70% of which was sold as an excess power, resulting in the purchase of power for 6,642kWh. 5 refs., 4 figs, 2 tabs.

  15. Integrated project management information systems: the French nuclear industry experience

    International Nuclear Information System (INIS)

    Jacquin, J.-C.; Caupin, G.-M.

    1990-01-01

    The article discusses the desirability of integrated project management systems within the French nuclear power industry. Change in demand for nuclear generation facilities over the last two decades has necessitated a change of policy concerning organization, cost and planning within the industry. Large corporate systems can benefit from integrating equipment and bulk materials tracking. Project management for the nuclear industry will, in future, need to incorporate computer aided design tools and project management information systems data bases as well as equipment and planning data. (UK)

  16. Integrated project management information systems: the French nuclear industry experience

    Energy Technology Data Exchange (ETDEWEB)

    Jacquin, J.-C.; Caupin, G.-M.

    1990-03-01

    The article discusses the desirability of integrated project management systems within the French nuclear power industry. Change in demand for nuclear generation facilities over the last two decades has necessitated a change of policy concerning organization, cost and planning within the industry. Large corporate systems can benefit from integrating equipment and bulk materials tracking. Project management for the nuclear industry will, in future, need to incorporate computer aided design tools and project management information systems data bases as well as equipment and planning data. (UK).

  17. Application of the nucleonic control systems in industry

    International Nuclear Information System (INIS)

    Urbanski, P.

    2001-01-01

    The aim of this report is the presentation of the present status and future trends in the application of ionising radiation for industrial measurements. A brief presentation of the nucleonic gauging principles and techniques is given and the application of measuring systems in the various branches of the worldwide and Polish industry is described. (author)

  18. Healthcare systems, the State, and innovation in the pharmaceutical industry

    Directory of Open Access Journals (Sweden)

    Ignacio José Godinho Delgado

    Full Text Available Abstract: This article discusses the relations between healthcare systems and the pharmaceutical industry, focusing on state support for pharmaceutical innovation. The study highlights the experiences of the United States, United Kingdom, and Germany, developed countries and paradigms of modern health systems (liberal, universal, and corporatist, in addition to Japan, a case of successful catching up. The study also emphasizes the experiences of China, India, and Brazil, large developing countries that have tried different catching up strategies, with diverse histories and profiles in their healthcare systems and pharmaceutical industries. Finally, with a focus on state forms of support for health research, the article addresses the mechanisms for linkage between health systems and the pharmaceutical industry, evaluating the possibilities of Brazil strengthening a virtuous interaction, favoring the expansion and consolidation of the Brazilian health system - universal but segmented ‒ and the affirmation of the innovative national pharmaceutical industry.

  19. Formal methods for industrial critical systems a survey of applications

    CERN Document Server

    Margaria-Steffen, Tiziana

    2012-01-01

    "Today, formal methods are widely recognized as an essential step in the design process of industrial safety-critical systems. In its more general definition, the term formal methods encompasses all notations having a precise mathematical semantics, together with their associated analysis methods, that allow description and reasoning about the behavior of a system in a formal manner.Growing out of more than a decade of award-winning collaborative work within the European Research Consortium for Informatics and Mathematics, Formal Methods for Industrial Critical Systems: A Survey of Applications presents a number of mainstream formal methods currently used for designing industrial critical systems, with a focus on model checking. The purpose of the book is threefold: to reduce the effort required to learn formal methods, which has been a major drawback for their industrial dissemination; to help designers to adopt the formal methods which are most appropriate for their systems; and to offer a panel of state-of...

  20. The analysis on dynamic range of industrial CT system

    International Nuclear Information System (INIS)

    Wang Huiqian; Wang Jue; Tan Hui

    2011-01-01

    Concerning the limitations of the definition of the dynamic range of industrial computed tomography (ICT) system, it researches the definition, measuring method and influencing factors of the dynamic range of industrial computed tomography (ICT) system from the concept of quantization and system. First, the character of the input-output curve was analyzed, and the method of obtaining the dynamic range of industrial computed tomography (ICT) system was proposed. Then, an experiment model was designed to gain dynamic range, based on 6 MeV high-energy industrial computed tomography (ICT) system. The results show that the larger the photosurface is, the smaller the dynamic range is, when the other parameters are unchanged. (authors)

  1. System safety education focused on industrial engineering

    Science.gov (United States)

    Johnston, W. L.; Morris, R. S.

    1971-01-01

    An educational program, designed to train students with the specific skills needed to become safety specialists, is described. The discussion concentrates on application, selection, and utilization of various system safety analytical approaches. Emphasis is also placed on the management of a system safety program, its relationship with other disciplines, and new developments and applications of system safety techniques.

  2. Control System and Data Logger for 800 Ci Machine RSL6050 137Cs Pencil Source at Gamma Green House

    International Nuclear Information System (INIS)

    Ayub Muhamad

    2015-01-01

    Gamma irradiation plant Green House installed and commissioned in 2005. The plant uses gamma radiation from a power source 137 Cesium 800 Ci. This radiation is aimed at the study of plants to find the mutation. The system developed for ease of operator Gamma Green House and also help researchers get a more accurate total dose exposure. The system developed by the coach of the University by using software lib-view, 2014. (author)

  3. HITACHI security concept for industrial control systems

    International Nuclear Information System (INIS)

    Endoh, H.; Yamada, T.; Okubo, S.; Nakano, T.

    2012-01-01

    Security is a necessary factor for the safe and efficient operation of today's control systems. To ensure safe operation of control systems throughout their lifetime, security measures must be carefully planned in the development phase and then maintained continuously during the operation phase and other following phases. To ensure operation within the system's safe states, Hitachi proposes security concept processes (1) to derive security measures rationally and (2) to maintain the security model over the system life cycle. Hitachi also proposes security development programs which support the integration of standards-compliant systems and development of robust control equipment. (author)

  4. Advanced Extended Plate and Beam Wall System in a Cold-Climate House

    Energy Technology Data Exchange (ETDEWEB)

    Mallay, Dave [Home Innovation Research Labs, Upper Marlboro, MD (United States); Wiehagen, Joseph [Home Innovation Research Labs, Upper Marlboro, MD (United States); Kochkin, Vladimir [Home Innovation Research Labs, Upper Marlboro, MD (United States)

    2016-01-29

    This report presents the design and evaluation of an innovative wall system. This highly insulated (high-R) light-frame wall system for use above grade in residential buildings is referred to as Extended Plate & Beam (EP&B). The EP&B design is the first of its kind to be featured in a new construction test house (NCTH) for the DOE Building America program. The EP&B wall design integrates standard building methods and common building products to construct a high-R wall that minimizes transition risks and costs to builders. The EP&B design combines optimized framing with integrated rigid foam sheathing to increase the wall system's R-value and reduce thermal bridging. The foam sheathing is installed between the wall studs and structural wood sheathing. The exterior wood sheathing is attached directly to a framing extension formed by extended top and bottom plates. The exterior wood sheathing can dry to the exterior and provides bracing, a clear drainage plane and flashing surface for window and door openings, and a nailing surface for siding attachment. With support of the DOE Building America program, Home Innovation Research Labs partnered with Lancaster County Career and Technology Center (LCCTC) to build a NCTH in Lancaster, PA to demonstrate the EP&B wall design in a cold climate (IECC climate zone 5A). The results of the study confirmed the benefits of the systems and the viability of its integration into the house construction process.

  5. Environmental protection systems for the petroleum industry

    International Nuclear Information System (INIS)

    Lowe, G.B.

    1996-01-01

    The transportation of petroleum products and other chemicals can involve spillage and leaks despite being closely controlled. Human error in the loading of road tankers or consumers refuelling their vehicles at service stations can lead to spillage accidents. Seepage through permeable concrete and its expansion joints can occur for diesel underground tanks with serious environmental consequences. This article describes methods which could be adopted by the petroleum industry to prevent these accidental incidents from causing environmental pollution. Service station forecourts could be constructed, using precast concrete hexagonal blocks with dry sand between them and then have a coating of sealant to prevent spills from seeping into ground water. Secondary containment for underground tanks should be given an elastomeric membrane coating. (UK)

  6. Effect of weaning stress, housing system and probiotics supplementation on cortisol, thyroid activity and productive performance of sucker camel calves

    International Nuclear Information System (INIS)

    Abdel-Fattah, M.S.; Hashem, A.L.S.; Azamel, A.A.; Farghaly, H.A.M.

    2011-01-01

    The weaning process has been identified as associated with potential psychological, nutritional and physiological stressors on both dam and her young. These stressors are often stressful for the young. Ten sucker camel calves were weaned using calf-dam on and suckling off weaning system (calves were kept with their dams at all times during weaning process and prevented from suckling) under two housing systems, 6 calves in group housing system (G) and 4 calves in individually housing system (I). Half of calves in each housing system were supplemented with probiotics (treated, P), while the other was not-supplemented with probiotics (control, C). This study was carried out at Maryout Research Station of the Desert Research Center, 35 km to southwest of Alexandria, Egypt. Calves were weaned at 280 days of age with initial live body weight (LBW) of 236.76±0.224 kg. The duration of the study was 35 days and divided into five weeks; one week served as pre-weaning followed by four weeks served as post-weaning period (calves were in treatments). Calves and their dams were used to estimate the effects of weaning stress, housing systems (group, G vs. individually, I) and probiotics supplementation on the productive performance, cortisol (COR) and thyroid hormones (T 3 and T 4 ) concentrations of camel calves (Camelus dromedaries). No measurements were done on the dams. The results indicated that, regardless the effect of housing system and Abdel-Fattah et al., J. Rad. Res. Appl. Sci., Vol. 4, No. 4(B) (2011) 1292 probiotics supplementation, weaning stress declined LBW -0.89% at d 7 post weaning. Concerned housing system effect, group-housed calves and individually-housed calves lost -0.36 and -1.43% of their body weights, respectively on d 7 post-weaning and they recovered their weaning weight (d 0 ) on d 14 post-weaning period (2.45 and 0.57%). Neither group housing system nor probiotics supplementation prevented the weight lost resulted by weaning stress during the first

  7. Insights on the Security and Dependability of Industrial Control Systems

    NARCIS (Netherlands)

    Kargl, Frank; van der Heijden, R.; van der Heijden, Rens W.; König, Hartmut; Valdes, Alfonso; Dacier, Marc C.

    2014-01-01

    The authors discuss the findings of a recent research seminar on the security and dependability of industrial control systems and provide an overview of major challenges in the field and areas where current research should focus.

  8. A systems approach to the South African dairy industry

    African Journals Online (AJOL)

    Elsabe Gagiano

    As the average productive life of dairy cows is 2.3 ... Keywords: Dairy cow, South Africa, dairy industry, milk production, milk price ..... optimize the entire production chain of the primary production systems, post harvest processes, transport,.

  9. Hybrid Cooling System for Industrial Application | Ezekwe | Nigerian ...

    African Journals Online (AJOL)

    Hybrid Cooling System for Industrial Application. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... more than five times over that achieved by using the gas (air) phase alone. ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  10. Research on networked manufacturing system for reciprocating pump industry

    Science.gov (United States)

    Wu, Yangdong; Qi, Guoning; Xie, Qingsheng; Lu, Yujun

    2005-12-01

    Networked manufacturing is a trend of reciprocating pump industry. According to the enterprises' requirement, the architecture of networked manufacturing system for reciprocating pump industry was proposed, which composed of infrastructure layer, system management layer, application service layer and user layer. Its main functions included product data management, ASP service, business management, and customer relationship management, its physics framework was a multi-tier internet-based model; the concept of ASP service integration was put forward and its process model was also established. As a result, a networked manufacturing system aimed at the characteristics of reciprocating pump industry was built. By implementing this system, reciprocating pump industry can obtain a new way to fully utilize their own resources and enhance the capabilities to respond to the global market quickly.

  11. INDUSTRIAL ENTERPRISE MANAGEMENT SYSTEM QUALITY ASSESMENT

    Directory of Open Access Journals (Sweden)

    S. V. Pankov

    2012-01-01

    Full Text Available Management systems of small-scale enterprises in Moscow region are of centralized linear type. Misunderstanding of the need for qualitymanagement operational processes is observed in such business structures. Using correct management systems results in reduction of business costs and increase of business economic efficiency and entrepreneurship social role.

  12. Fundamental Characteristics of Industrial Variant Specification Systems

    DEFF Research Database (Denmark)

    Hansen, Benjamin Loer; Hvam, Lars

    2004-01-01

    fundamental concepts related to this task, which are relevant to understand for academia and practitioners working with the subject. This is done through a description of variant specification tasks and typical aspects of system solutions. To support the description of variant specification tasks and systems...

  13. Control systems in optical fibre industry

    Czech Academy of Sciences Publication Activity Database

    Kostka, František

    1998-01-01

    Roč. 1, č. 4 (1998), s. 195-200 ISSN 1405-5546 Grant - others:AV ČR(CZ) KSK1067601 Projekt 10/96/K:4107 Keywords : control systems * real time systems * microcomputers * optical fibres Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

  14. Effects of different floor housing systems on the welfare of fast-growing broilers with an extended fattening period

    Directory of Open Access Journals (Sweden)

    E. Çavuşoğlu

    2018-01-01

    Full Text Available This study was made to investigate the long-term effects of different floor housing systems on the welfare of fast-growing broilers. The experiment was performed on 210-day-old fast-growing hybrid male chickens with identical conditions until 47 days of age. Animal-based welfare parameters were measured to investigate the welfare level in the group housed on deep litter, a litter and slat system, and a slatted floor, with five replicates for each group. Results showed that the main welfare indicators in live birds, such breast dirtiness, plumage score, footpad lesion, and hock burn lesion, were negatively affected in broilers kept on conventional deep-litter floor housing. But hemorrhage or lesion scores of the breast and shoulder of broilers in slat floor housing were found to be significantly greater than in conventional deep litter as a result of a heavy body weight at a greater slaughter age (p < 0.05. Pathologically, the prevalence of footpad and hock joint dermatitis was very high in the deep-litter housing system. Femoral head necrosis was not observed in any floor housing group. The results indicated that keeping broilers on a slat flooring system is preferable for younger slaughter ages and for a lighter slaughter weight. When considering the relationship between animal welfare and production economy, moving from one floor house system to another floor housing system should be carefully weighted in future decisions. Moreover, further investigations are needed in order to examine the incidence of joint and bone problems with muscle inflammation in heavier broilers in commercial conditions.

  15. Expert System Applications for the Electric Power Industry: Proceedings

    International Nuclear Information System (INIS)

    1992-06-01

    A conference on Expert System Applications for the Electric Power Industry was held in Boston on September 8--11, 1991 to provide a forum for technology transfer, technical information exchange, and education. The conference was attended by more than 150 representatives of electric utilities, equipment manufacturers, engineering consulting organizations, universities, national laboratories, and government agencies. The meeting included a keynote address, 70 papers, and 18 expert system demonstrations. Sessions covered expert systems in power system planning operations, fossil power plant applications, nuclear power plant applications, and intelligent user interfaces. The presentations showed how expert systems can provide immediate benefits to the electric power industry in many applications. Individual papers are indexed separately

  16. UNIPOLAR, BIPOLAR OR MULTIPOLAR INTERNATIONAL SYSTEM? THE DEFENSE INDUSTRY FACTOR

    OpenAIRE

    ÖZKAN, Gökhan

    2008-01-01

    International system can be defined as a complex system of systems that is comprised of economic, political, scientific, technological and military systems. It is hard to analyze this complex system. It is even harder to forecast its future. Nonetheless, there are factors such as the defense industry and military power that affect the dynamics of the international system much more than other factors. After the Revolution in Military Affairs, which transformed the military paradigm, significa...

  17. Solar House Obdach: experiences with a solar ground-coupled storage system

    Energy Technology Data Exchange (ETDEWEB)

    Bruck, M; Blum, P; Held, E; Aranovitch, E; Hardacre, A G; Ofverholm, E [eds.

    1982-09-14

    Within the framework of the Solar House Obdach-project, a system consisting of a ground heat exchanger, a low-temperature collector, a water-glycol/water heat pump and a low-temperature heating system was examined with regard to its suitability as only heat source of a house. With the design chosen (1 m/sup 2/ ground collector area and 0.3 m/sup 2/ low-temperature collector area per 80 W load), a seasonal performance factor of 2.83 could be obtained. About 40% of the low-temperature heat supplied to the heat pump were delivered directly or indirectly (by means of short-term storage in the ground) by the low-temperature collector, whereas about 60% came from the natural sources of energy of the ground (air heat, radiation, precipitation, ground water and slope water). The results obtained are used to verify and improve a computer model design program for ground collectors and ground-coupled storage systems which should help to optimize the design of solar plants, particularly under difficult conditions.

  18. Influence of Housing System and Number of Transported Animals on Transport-induced Mortality in Slaughter Pigs

    Directory of Open Access Journals (Sweden)

    Eva Voslářová

    2010-01-01

    Full Text Available The study monitored the effect of the housing system and the number of animals transported together on transport-induced mortality of slaughter pigs in the Czech Republic in the period from 2004 to 2008. Concerning the type of housing during the fattening, the lowest mortality rate during the subsequent transport to slaughter houses was detected among pigs fattened on solid floor (0.047% and on deep bedding (0.084%. The highest mortality during transport was detected among pigs fattened on fully or partially slatted floor (0.139%, a significant difference (p p < 0.01 compared to the load sizes of up to 40 animals.

  19. 2001 Industry Studies: Land Combat Systems

    National Research Council Canada - National Science Library

    Alyaqout, Faisal

    2001-01-01

    .... The days when production lines and factories hummed at peak capacity are gone. Orders for land combat systems have been reduced by nearly two-thirds since 1990, and competition for what few procurement dollars remain is stiff...

  20. Industrial optoelectronic measurement systems using coherent light

    International Nuclear Information System (INIS)

    Fagan, W.F.

    1987-01-01

    This book covers the proceedings of the Society of Photo-Optical Instrumentation Engineers. Topics covered include Laser metrology systems used for reactor inspection in the central electricity generating board and computer automated holometry for automotive applications

  1. Load leveling on industrial refrigeration systems

    Science.gov (United States)

    Bierenbaum, H. S.; Kraus, A. D.

    1982-01-01

    A computer model was constructed of a brewery with a 2000 horsepower compressor/refrigeration system. The various conservation and load management options were simulated using the validated model. The savings available for implementing the most promising options were verified by trials in the brewery. Result show that an optimized methodology for implementing load leveling and energy conservation consisted of: (1) adjusting (or tuning) refrigeration systems controller variables to minimize unnecessary compressor starts, (2) The primary refrigeration system operating parameters, compressor suction pressure, and discharge pressure are carefully controlled (modulated) to satisfy product quality constraints (as well as in-process material cooling rates and temperature levels) and energy evaluating the energy cost savings associated with reject heat recovery, and (4) a decision is made to implement the reject heat recovery system based on a cost/benefits analysis.

  2. A Telecommunications Industry Primer: A Systems Model.

    Science.gov (United States)

    Obermier, Timothy R.; Tuttle, Ronald H.

    2003-01-01

    Describes the Telecommunications Systems Model to help technical educators and students understand the increasingly complex telecommunications infrastructure. Specifically looks at ownership and regulatory status, service providers, transport medium, network protocols, and end-user services. (JOW)

  3. Cybersecurity Framework for Ship Industrial Control System

    OpenAIRE

    Maule, R. William; Hake, Joseph

    2016-01-01

    Ship mechanical and electrical control systems, and the communications grid through which these devices operate, are a high priority concern for Navy leadership. Ship systems use microprocessor-based controls to interface with physical objects, and Programmable Logic Controllers (PLCs) to automate ship electromechanical processes. Ship operations are completely dependent on these devices. The commercial security products upon which ships depend do not work on ICS, leaving ships vulnerable. Th...

  4. 78 FR 18252 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

    Science.gov (United States)

    2013-03-26

    ...-AM78 Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System... applicable sections. The Federal Prevailing Rate Advisory Committee, the national labor- management committee... proposing to amend 5 CFR part 532 as follows: PART 532--PREVAILING RATE SYSTEMS 0 1. The authority citation...

  5. Process Control Systems in the Chemical Industry: Safety vs. Security

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey Hahn; Thomas Anderson

    2005-04-01

    Traditionally, the primary focus of the chemical industry has been safety and productivity. However, recent threats to our nation’s critical infrastructure have prompted a tightening of security measures across many different industry sectors. Reducing vulnerabilities of control systems against physical and cyber attack is necessary to ensure the safety, security and effective functioning of these systems. The U.S. Department of Homeland Security has developed a strategy to secure these vulnerabilities. Crucial to this strategy is the Control Systems Security and Test Center (CSSTC) established to test and analyze control systems equipment. In addition, the CSSTC promotes a proactive, collaborative approach to increase industry's awareness of standards, products and processes that can enhance the security of control systems. This paper outlines measures that can be taken to enhance the cybersecurity of process control systems in the chemical sector.

  6. Applications of radio frequency identification systems in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Hind, D [Davis Derby Limited (United Kingdom)

    1994-12-31

    The paper describes the application of Radio Frequency Identification (RFID) systems in the mining industry for both surface and underground mines. The history of the RFID system, types available, the transponder, and the various techniques used are described and compared. The design and certification of a system for use in a hazardous area are described, noting the hazard of inadvertent detonator ignition. 2 refs.

  7. Software systems for energy control in the English industry

    International Nuclear Information System (INIS)

    Bouma, J.W.J.

    1993-01-01

    Monitoring and targeting software systems have proved to be valuable tools for energy control, permitting to save five to ten percent of energy. The article reviews the systems that are presently available in England and illustrates how these systems are successfully used in practice in small (British Telecom) and middle large (Charles Wells Brewery) industrial applications. (A.S.)

  8. Sequence-aware intrusion detection in industrial control systems

    NARCIS (Netherlands)

    Caselli, M.; Zambon, Emmanuele; Kargl, Frank; Zhou, Jianying; Jones, D.

    Nowadays, several threats endanger cyber-physical systems. Among these systems, industrial control systems (ICS) operating on critical infrastructures have been proven to be an attractive target for attackers. The case of Stuxnet has not only showed that ICSs are vulnerable to cyber-attacks, but

  9. Treatment of duck house wastewater by a pilot-scale sequencing batch reactor system for sustainable duck production.

    Science.gov (United States)

    Su, Jung-Jeng; Huang, Jeng-Fang; Wang, Yi-Lei; Hong, Yu-Ya

    2018-06-15

    The objective of this study is trying to solve water pollution problems related to duck house wastewater by developing a novel duck house wastewater treatment technology. A pilot-scale sequencing batch reactor (SBR) system using different hydraulic retention times (HRTs) for treating duck house wastewater was developed and applied in this study. Experimental results showed that removal efficiency of chemical oxygen demand in untreated duck house wastewater was 98.4, 98.4, 87.8, and 72.5% for the different HRTs of 5, 3, 1, and 0.5 d, respectively. In addition, removal efficiency of biochemical oxygen demand in untreated duck house wastewater was 99.6, 99.3, 90.4, and 58.0%, respectively. The pilot-scale SBR system was effective and deemed capable to be applied to treat duck house wastewater. It is feasible to apply an automatic SBR system on site based on the previous case study of the farm-scale automatic SBR systems for piggery wastewater treatment.

  10. Industrial disasters - the expert systems solution

    International Nuclear Information System (INIS)

    Sachs, P.

    1986-01-01

    Six mistakes by the operators led to the accident at the Cherobyl nuclear reactor. These have been studied. It is suggested that an expert systems approach could prevent similar accidents. The expert system is a new approach to software programming where programs are required to perform intelligent analyses of complex situations. It separates the knowledge of a problem from the procedural code that performs the decision. An expert system will evaluate data and indicate a priority on alarms in real time. Now software systems can detect the cause of a problem in a process plant and present their findings to the operators in the control room. This should enable operators to make the correct decisions as they will know which underlying process faults are causing the alarms to operate. The Chernobyl post-mortem meeting made 13 proposals for improving safety. Two in particular are noted as relevant to expert advice systems; international collaboration on man-reactor relationships and a conference to explore the balance of automation and human action to minimise operating errors. (U.K.)

  11. Soft System Methodology as a Tool to Understand Issues of Governmental Affordable Housing Programme of India: A Case Study Approach

    Science.gov (United States)

    Ghosh, Sukanya; Roy, Souvanic; Sanyal, Manas Kumar

    2016-09-01

    With the help of a case study, the article has explored current practices of implementation of governmental affordable housing programme for urban poor in a slum of India. This work shows that the issues associated with the problems of governmental affordable housing programme has to be addressed to with a suitable methodology as complexities are not only dealing with quantitative data but qualitative data also. The Hard System Methodologies (HSM), which is conventionally applied to address the issues, deals with real and known problems which can be directly solved. Since most of the issues of affordable housing programme as found in the case study are subjective and complex in nature, Soft System Methodology (SSM) has been tried for better representation from subjective points of views. The article explored drawing of Rich Picture as an SSM approach for better understanding and analysing complex issues and constraints of affordable housing programme so that further exploration of the issues is possible.

  12. EPRI expert system activities for nuclear utility industry application

    International Nuclear Information System (INIS)

    Naser, J.A.

    1990-01-01

    This paper reports on expert systems which have reached a level of maturity where they offer considerable benefits for the nuclear utility industry. The ability of expert systems to enhance expertise makes them an important tool for the nuclear utility industry in the areas of engineering, operations and maintenance. Benefits of expert system applications include comprehensive and consistent reasoning, reduction of time required for activities, retention of human expertise and ability to utilize multiple experts knowledge for an activity. The Electric Power Research Institute (EPRI) has been performing four basic activities to help the nuclear industry take advantage of this expert system technology. The first is the development of expert system building tools which are tailored to nuclear utility industry applications. The second is the development of expert system applications. The third is work in developing a methodology for verification and validation of expert systems. The last is technology transfer activities to help the nuclear utility industry benefit from expert systems. The purpose of this paper is to describe the EPRI activities

  13. Simulation of solar system in a house; Simulacion de un sistema solar en una vivienda unifamiliar

    Energy Technology Data Exchange (ETDEWEB)

    Rey, F. J.; Velasco, E.; Herrero, R.; Varela, F.; Nunez, M. J.; Lopez, L. M.

    2004-07-01

    Building sustainable development make necessary the rational use of already existing Energy Resources and the use of the Renewable Energies as the Thermal Solar Energy. The technological advance of the last years has allowed the development and improvement of Solar Energy Systems. As today the Thermal Solar Energy is available technical and economically reducing the environmental impact. In the present work it has been developed a TRNSYS simulation of a thermal Solar System for Hot water consumption and Space Heating by radiant Flooring in a single house. The Thermal Solar installation Simulation allows the hour-by-hour system parameters treatment to determine the energy consumptions, yields, solar contribution etc. Also, it has been studied the Energy Qualification of the building by TRNSYS and the AEV methodology developed by the Termotecnia Department of Valladolid University ( UVA). (Author)

  14. House owners' perceptions and factors influencing their choice of specific heating systems in Germany

    International Nuclear Information System (INIS)

    Decker, Thomas; Menrad, Klaus

    2015-01-01

    Against the background of global climate changes and several legal obligations, the target of this paper is to analyze the buying behavior of house owners in Germany with respect to heating systems and the main factors influencing choice when purchasing a specific heating system (e.g., oil heating or wood pellet heating). To investigate these issues, a Germany-wide written survey was conducted and the completed questionnaires of 775 respondents analyzed using multinomial logistic regression. Of 29 different variables influencing the purchase of a heating system, 12 statistically significant variables have been identified which characterize the owners of oil heating, a heat pump, gas heating and wood pellet heating. The membership of different ecological clusters primarily segregates the owners of a specific heating system, but the assessment of the different combustibles also plays a major role in this context. Suppliers of heating systems can use the results of this study to fine-tune their marketing strategies. With respect to policy issues only limited room for additional economic incentives can be identified to promote replacement of fossil-fuel based heating systems in favor of renewable ones. -- Highlights: •Current regulations support renewable heating systems insufficiently in Germany. •We developed a model to characterize the purchasers of different heating systems. •Ecological attitudes differentiate the purchasers of the different heating systems. •Economic reasons are mainly important for owners of gas and oil heating systems

  15. Space Industry Commercialization: A Systems Engineering Evaluation of Alternatives

    Science.gov (United States)

    Dinally, Jihan

    The Constellation Program cancellation reversed the government and commercial space industry's roles and relationships by dedicating the majority of the federal funding and opportunities to the commercial space industry and left the government space industry in search of an approach to collaborate with the dominant organization, the commercial space industry service providers. The space industry government agencies, Air Force Space Command (AFSPC) and National Aeronautics and Space Administration (NASA) had realized that to gain resources in the new commercially oriented economic environment, they had to work together and possess the capabilities aligned with the National Space Policy's documented goals. Multi-organizational collaboration in space industry programs is challenging, as NASA, AFSPC, and commercial providers, follow different [1] enterprise architecture guidance such as the NASA systems engineering Handbook, MIL-STD-499 and "A Guide to the systems engineering Body of Knowledge" by the International Council on systems engineering [2] [3]. A solution to streamline their enterprise architecture documentation and meet National Space Policy goals is the Multi-User Architecture Maturity Model Methodology (MAM3), which offers a tailored systems engineering technique the government agencies and private companies can implement for the program's maturity level. In order to demonstrate the MAM3, a CubeSat motivated study was conducted partnering a commercial provider with a government agency. A survey of the commercial space industry service providers' capabilities was performed to select the private companies for the study. Using the survey results, the commercial space industry service providers were ranked using the Analytic Hierarchy Process (AHP) [4]. The AHP is a structured technique for making complex decisions for representing and quantifying its weights, relating those weights to overall goals, and evaluating alternative solutions [5] - [8]. The weights

  16. Computer Education with "Retired" Industrial Systems.

    Science.gov (United States)

    Nesin, Dan; And Others

    1980-01-01

    Describes a student-directed computer system revival project in the Electrical and Computer Engineering department at California State Polytechnic University, which originated when an obsolete computer was donated to the department. Discusses resulting effects in undergraduate course offerings, in student extracurricular activities, and in…

  17. Rintamaa, R. (VTT Industrial Systems, Espoo (FI))

    International Nuclear Information System (INIS)

    Ageing management

    2005-01-01

    At present, a large number of nuclear reactors have been operating for longer time than 20 years. Therefore, safety of these plants is of increasing concern to the European policymakers and industry. All nuclear plant units are large investments for the owners. They need to be operated with excellent usage factors without any significant outages due to materials or structural integrity problems. The utilities are obviously very much interested to be able to continue safe and efficient operation long in the future. The fact that e.g. the Finnish nuclear reactors (four units) have performed so well, is a good proof of high technology and expertise in operation and preventive maintenance. They need to involve the consideration of a number of factors, such as better understanding and managing materials ageing phenomena, comparison of current safety standards, the socio-political climate and uncertainties relating to spent fuel management and decommissioning. More importantly, the optimisation of the operational conditions of aged reactors and the decision process about plan life management (PLIM) are becoming key issues for those in charge of plant safety and performance. Continuous improvement strategy has been adopted to the nuclear regulation principles in some countries, e.g. in Finland. Instead of getting a licence for 30 or 40 years in a time, the Finnish NPP's operate on shorter operation licences. Each renewal of operation licence is based on a periodic safety review (PSR) which is performed in a period of ten years. The regulatory body requires that the utilities follow the international state of the art and adopt all feasibly available means to maintain and improve the safety. On the other hand, continuous improvement is also needed for effective and long term utilisation of the primary capital investment to the plant, which is a major concern to the utility. The common interest to continuous improvements forms a good platform for co-operation between the

  18. A system for optimizing of private house owner's spending and benefits

    NARCIS (Netherlands)

    Tempelmans Plat, H.; Ruokolainen, A.

    1998-01-01

    Investment decisions about privately-owned houses are usually based on limited investment budget and vague information about choice alternatives available. Since a household buying a dwelling has to compare the housing expenditure with other expenditures, the financial consequences of the housing

  19. Data-Driven Assistance Functions for Industrial Automation Systems

    International Nuclear Information System (INIS)

    Windmann, Stefan; Niggemann, Oliver

    2015-01-01

    The increasing amount of data in industrial automation systems overburdens the user in process control and diagnosis tasks. One possibility to cope with these challenges consists of using smart assistance systems that automatically monitor and optimize processes. This article deals with aspects of data-driven assistance systems such as assistance functions, process models and data acquisition. The paper describes novel approaches for self-diagnosis and self-optimization, and shows how these assistance functions can be integrated in different industrial environments. The considered assistance functions are based on process models that are automatically learned from process data. Fault detection and isolation is based on the comparison of observations of the real system with predictions obtained by application of the process models. The process models are further employed for energy efficiency optimization of industrial processes. Experimental results are presented for fault detection and energy efficiency optimization of a drive system. (paper)

  20. ERP system for 3D printing industry

    Directory of Open Access Journals (Sweden)

    Deaky Bogdan

    2017-01-01

    Full Text Available GOCREATE is an original cloud-based production management and optimization service which helps 3D printing service providers to use their resources better. The proposed Enterprise Resource Planning system can significantly increase income through improved productivity. With GOCREATE, the 3D printing service providers get a much higher production efficiency at a much lower licensing cost, to increase their competitiveness in the fast growing 3D printing market.

  1. EPICS: Experimental Physics and Industrial Control System

    Science.gov (United States)

    Epics Development Team

    2013-02-01

    EPICS is a set of software tools and applications developed collaboratively and used to create distributed soft real-time control systems for scientific instruments such as particle accelerators and telescopes. Such distributed control systems typically comprise tens or even hundreds of computers, networked together to allow communication between them and to provide control and feedback of the various parts of the device from a central control room, or even remotely over the internet. EPICS uses Client/Server and Publish/Subscribe techniques to communicate between the various computers. A Channel Access Gateway allows engineers and physicists elsewhere in the building to examine the current state of the IOCs, but prevents them from making unauthorized adjustments to the running system. In many cases the engineers can make a secure internet connection from home to diagnose and fix faults without having to travel to the site. EPICS is used by many facilities worldwide, including the Advanced Photon Source at Argonne National Laboratory, Fermilab, Keck Observatory, Laboratori Nazionali di Legnaro, Brazilian Synchrotron Light Source, Los Alamos National Laboratory, Australian Synchrotron, and Stanford Linear Accellerator Center.

  2. Environmental management systems: An industry viewpoint

    International Nuclear Information System (INIS)

    Ottenbreit, R.

    1993-01-01

    Imperial Oil is upgrading systems used to ensure protection of health and safety and to facilitate the internalization and integration of environmental considerations into its business. Work in progress related to this upgrading is reported. The upgrading was undertaken partly in response to increased expectations from stakeholders and from the notion that improvement of the environmental, health, and safety (EH ampersand S) aspects of business can have the effect of improving reliability, lowering expenses, and minimizing liabilities. The responsibility for establishing environmental policy and direction as well as the environmental management framework rests with Imperial Oil's management committee and the EH ampersand S committee of the board of directors. Responsibility and accountability for implementation and sustainment of environmental processes and systems resides with line management. One of the management systems, the Operations Integrity Management Framework, is described. Elements of this framework include management leadership, accountability, and commitment; risk assessment and management; management of change; personnel and training; incident investigation and analysis; and facilities design and construction. 2 figs

  3. Green house gas emissions reduction in Brazilian industry; Reducao das emissoes de gases causadores do efeito estufa na industria brasileira

    Energy Technology Data Exchange (ETDEWEB)

    Aragao Neto, Raymundo Moniz de [Programa GERBI - Reducao da Emissao de Gases Causadores do Efeito Estufa na Industria Brasileira, Fortaleza, CE (Brazil)

    2004-07-01

    The recent crisis in electricity supply raised in all Brazilians the necessity in improving energy resources. The expansion of generation capacity cannot be seen as the unique solution: optimise what is available already is at least so important than to expand. The rational use of energy resources brings additional benefits as reduced environmental impacts, replacement of equipment and following incentives to industry and employment. Promote coordinated actions has been challenging in several places. In Brazil, GERBI Program aims to address several market barriers, developing activities in different fronts: service suppliers' qualification, preparation of financial agents and, mainly, engage industrial end users for improved solutions. The paper presents GERBI Program structure as an incentive to rational energy use in industrial facilities, focused on GHG emissions reduction. The Program is structured in three main components: energy efficiency projects development, supporting industries to implement better practices and efficient technologies, development of CDM candidate projects, making use of 'carbon credits' resulted from reduced emissions, and training and qualification. (author)

  4. A study of polluted eco-system around industrial areas

    International Nuclear Information System (INIS)

    Husaini, S.N.; Khan, E.U.; Qureshi, I.E.; Malik, F.; Zaidi, J.H.; Arif, M.; Fatima, I.; Arif, M.

    2005-01-01

    Industrial pollution is one of the most serious problems in Pakistan. The uncontrolled release of untreated industrial effluents to large water bodies has deleterious effects on water quality, aquatic life and human health. The concentration of heavy metals in eco-system is reaching at alarming levels and is increasing yearly. In reality, the industries are not equipped with proper effluent treatment plants. The environmental protection law is not strictly implemented to limit the release and/or proper disposal of industrial effluents. Therefore, volume of specified industrial discharge is growing at an exponential rate without any specific safeguards. Effective measures, which can eliminate or considerably reduce hazardous factors from the human environment to minimize the associated health risks, must be identified and eradicated. In order to achieve these objectives, the study has been done to reach a balanced assessment of the risks and benefits involved. For this purpose two industrial cities of Pakistan namely, Gujranwala and Faisalabad have been selected. Four major industries existing in these cities, namely Yam, textile, paper and board and ceramics, have been studied. The specimens of the irrigated soil exposed to the industrial effluent, crops and vegetables grown on that soil have been analyzed study the hazardous effects on human health. (author)

  5. The evolution of industrial power monitoring and control systems

    Energy Technology Data Exchange (ETDEWEB)

    Nicholson, K. E.

    1998-04-01

    The evolution of power monitoring and control systems in industrial situations are described. Computer-based PMC (power monitoring and control) systems are discussed in two sections. Section 1 covers the PC/DOS based systems in use up to the 1990s. These systems had multitasking capability, sufficient for scanning a serial line running a multi-drop protocol to field instruments, which in turn were running either proprietary or PLC subsets, maintaining a level of operator display, data logging and query support. Since the mid-1990s the second generation of industrial power monitoring and control systems based on the PC/NT system came into use, driven to market by three factors: (1) availability of low cost PCs, (2) widespread availability of computer networking technologies, and (3) the appearance of the robust, industrially viable NT operating system. Second generation systems are characterized by division into two tiers; a monitoring system focused on remote metering, and a second tier of a modular system capable of fully implementing both power monitoring and supervisory control. Looking toward the future, the requirements for systems is expected to become more unique, driven by the need for information for energy procurement decision making, automatic control for integrating power acquisition from multiple suppliers, power capacity and integrated power and production control planning needs, and power quality and reliability issues. A review of the functionality of PMC systems, and system architectures was also provided. Results of a survey of PMC systems applications were also discussed. 2 refs., 4 tabs., 8 figs.

  6. Supplier quality assurance systems: a study in the nuclear industry

    International Nuclear Information System (INIS)

    Singer, A.J.; Churchill, G.F.; Dale, B.G.

    1988-01-01

    The results are reported of a study which investigated the impact of quality assurance on 13 suppliers to the nuclear industry. The purpose of the study was to determine the benefits and problems of applying quality assurance in the supply of high risk plant items and material for nuclear installations. The paper discusses the problems facing the industry including: multiple audits and inspections, the irritation with having to contend with two quality system standards (namely BS 5750 and BS 5882) and the cost effectiveness of the more stringent quality system and quality control surveillance requirements imposed by the nuclear industry. It is also pointed out that companies supplying non-nuclear industrial customers were dissatisfied with the qualifications, experience and professional competence of some auditors and many inspectors. (author)

  7. Endogenous Price Bubbles in a Multi-Agent System of the Housing Market.

    Science.gov (United States)

    Kouwenberg, Roy; Zwinkels, Remco C J

    2015-01-01

    Economic history shows a large number of boom-bust cycles, with the U.S. real estate market as one of the latest examples. Classical economic models have not been able to provide a full explanation for this type of market dynamics. Therefore, we analyze home prices in the U.S. using an alternative approach, a multi-agent complex system. Instead of the classical assumptions of agent rationality and market efficiency, agents in the model are heterogeneous, adaptive, and boundedly rational. We estimate the multi-agent system with historical house prices for the U.S. market. The model fits the data well and a deterministic version of the model can endogenously produce boom-and-bust cycles on the basis of the estimated coefficients. This implies that trading between agents themselves can create major price swings in absence of fundamental news.

  8. Endogenous Price Bubbles in a Multi-Agent System of the Housing Market.

    Directory of Open Access Journals (Sweden)

    Roy Kouwenberg

    Full Text Available Economic history shows a large number of boom-bust cycles, with the U.S. real estate market as one of the latest examples. Classical economic models have not been able to provide a full explanation for this type of market dynamics. Therefore, we analyze home prices in the U.S. using an alternative approach, a multi-agent complex system. Instead of the classical assumptions of agent rationality and market efficiency, agents in the model are heterogeneous, adaptive, and boundedly rational. We estimate the multi-agent system with historical house prices for the U.S. market. The model fits the data well and a deterministic version of the model can endogenously produce boom-and-bust cycles on the basis of the estimated coefficients. This implies that trading between agents themselves can create major price swings in absence of fundamental news.

  9. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Cold Climates

    Energy Technology Data Exchange (ETDEWEB)

    Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Florida Solar Energy Center (FSEC); IBACOS; National Renewable Energy Laboratory (NREL)

    2006-08-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in Cold Climates on a cost-neutral basis.

  10. Endogenous Price Bubbles in a Multi-Agent System of the Housing Market

    Science.gov (United States)

    2015-01-01

    Economic history shows a large number of boom-bust cycles, with the U.S. real estate market as one of the latest examples. Classical economic models have not been able to provide a full explanation for this type of market dynamics. Therefore, we analyze home prices in the U.S. using an alternative approach, a multi-agent complex system. Instead of the classical assumptions of agent rationality and market efficiency, agents in the model are heterogeneous, adaptive, and boundedly rational. We estimate the multi-agent system with historical house prices for the U.S. market. The model fits the data well and a deterministic version of the model can endogenously produce boom-and-bust cycles on the basis of the estimated coefficients. This implies that trading between agents themselves can create major price swings in absence of fundamental news. PMID:26107740

  11. Copper ion treatment for zebra mussel mitigation in house service water systems

    Energy Technology Data Exchange (ETDEWEB)

    Babinec, J. [We Energies, Milwaukee, WI (United States)

    2003-09-01

    The Oak Creek Power Plant is a four unit, coal-fired plant totaling 1 140 MW. The plant has a once-through circulating water system with a common forebay, from which it draws both main condenser circulating and house service water. System design prohibits thermal treatment strategies and obtaining environmental permitting for mollusicidal treatments is difficult at best. Initial treatment strategies revolved around chlorination, using sodium hypochlorite, which proved to be marginally successful, or chlorine dioxide, which raised safety concerns. This paper discusses plant design, treatment history, environmental permitting issues, design and installation of a copper ion generator, problems encountered and solutions, operating and maintenance requirements, and results to date of copper ion technology at the Energies' Oak Creek Power Plant. (orig.)

  12. LEARNING MANAGEMENT SYSTEMS: ENGINEERING THE EDUCATION INDUSTRY TO EDUCATE THE INDUSTRIAL ENGINEER

    Directory of Open Access Journals (Sweden)

    L. Van Dyk

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: A learning management system (LMS is any infrastructure on which e-learning can be built and delivered. In this article two sides of the LMS coin are investigated: On the one side, it is argued that industrial and systems engineering skills are equally relevant for learning systems as for as for any other system. To support this argument, an analogy is drawn between the management of learning systems and the management of manufacturing systems. On the other side of the coin, the educational issues and concerns related to implementing an LMS at the University of Pretoria are investigated by means of a case study in the Industrial Engineering department. It is concluded that the industrial engineering educator is in the unique position of understanding and contributing towards the engineering of the education industry whilst educating the industrial engineer.

    AFRIKAANSE OPSOMMING: ‘n Leerbestuurstelsel (LMS is enige infrastruktuur waarop e-leer gebou en afgelewer kan word. In hierdie artikel word beide kante van die LMS muntstuk ondersoek: Aan die een kant word getoon dat bedryfsingenieursvaardighede en -beginsels ewe toepaslik is op leerstelsels as op vervaardigingstelsels. Om hierdie argument te steun word 'n analogie getrek tussen the bestuur van leerstelsels en die bestuur van vervaardigingstelsels. Aan die ander kant van die muntstuk word die opvoedkundige aspekte verbonde aan die implementering van ‘n leerbestuurstelsel (LMS aan die Universiteit van Pretoria ondersoek aan die hand van ‘n gevallestudie in die Bedryfsingenieursdepartment. Die gevolgtrekking word gemaak dat die bedryfsingenieurs-opleier in 'n unieke posisie is om die opleidingsindustrie te begryp en by dra tot the ontwikkeling daarvan terwyl die bedryfsingenieur opgelei word.

  13. Survey of egg farmers regarding the ban on conventional cages in the EU and their opinion of alternative layer housing systems in Flanders, Belgium.

    Science.gov (United States)

    Stadig, L M; Ampe, B A; Van Gansbeke, S; Van den Bogaert, T; D'Haenens, E; Heerkens, J L T; Tuyttens, F A M

    2016-03-01

    On 1 January 2012, conventional cages for laying hens were banned in the European Union (EU); all egg farmers must now use alternative hen housing systems. In total, 218 Flemish egg farmers were surveyed in 2013 to 2014 regarding which housing systems they currently use, their degree of satisfaction with the system, and how they experienced the transition from conventional cages to an alternative system. The response rate was 58.3% (127 respondents). Of these, 43 (33.9%) were no longer active as an egg farmer, mainly due to the ban on conventional cages. The respondents who were active as egg farmers both before and after the transition (84, 66.1%) mainly judged the ban as negative for their own finances and for the competitive position of the Belgian egg industry, but were neutral or positive regarding the general consequences for their own business. Most respondents' hens were housed in either aviary systems (47.7%) or in alternative cage systems (38.2%). When choosing a new system, the fit into the farm and consumer demand were the most important factors. Consumer demand was the main reason for choosing a system with free-range access. In general, egg farmers were satisfied with the system they chose, although this differs between systems. When asked to compare the alternative systems to conventional cages, alternatives were judged to be better for hen welfare and consumer demand, but similar or worse for all other aspects, especially labor. Egg farmers previously using conventional cages judged alternative systems more negatively than those who had no prior experience with conventional cages. Farmers who had experience with free-range systems judged these more positively than those without this experience, e.g., for egg consumer demand, profitability, and hen welfare. These results can possibly be extrapolated to other EU countries in which conventional cages were the most common housing system until 2012, and lessons can be drawn from the farmers' experiences

  14. Energy intake and growth of weanling horses in a cold loose housing system

    Directory of Open Access Journals (Sweden)

    E. AUTIO

    2008-12-01

    Full Text Available The demand for information relating to the nutrition of horses in a cold environment is increasing with the popularity of loose housing of horses. This study examined the energy intake and growth of 10 weanling horses from November to March (22 weeks in a loose housing system (paddock and insulated sleeping hall with deep-litter bed. The horses were measured weekly for body condition and body weight, and the feeding was adjusted according to a horse’s body condition. Metabolizable energy (ME intake was compared to Finnish (MTT 2006 and Swedish (SLU 2004 nutrient requirements for 6–12-month-old horses. ME intake (75.5 ± 11.8 MJ d-1, mean ± SD was on average 24.6% above the requirements. The intake varied in a non-linear fashion in the course of the winter: y = 0.086x2 – 0.902x + 71.5, where x is weeks from November to March (p

  15. Design and applications of Computed Industrial Tomographic Imaging System (CITIS)

    International Nuclear Information System (INIS)

    Ramakrishna, G.S.; Umesh Kumar; Datta, S.S.; Rao, S.M.

    1996-01-01

    Computed tomographic imaging is an advanced technique for nondestructive testing (NDT) and examination. For the first time in India a computed aided tomography system has been indigenously developed in BARC for testing industrial components and was successfully demonstrated. The system in addition to Computed Tomography (CT) can also perform Digital Radiography (DR) to serve as a powerful tool for NDT applications. It has wider applications in the fields of nuclear, space and allied fields. The authors have developed a computed industrial tomographic imaging system with Cesium 137 gamma radiation source for nondestructive examination of engineering and industrial specimens. This presentation highlights the design and development of a prototype system and its software for image reconstruction, simulation and display. The paper also describes results obtained with several tests specimens, current development and possibility of using neutrons as well as high energy x-rays in computed tomography. (author)

  16. The effects of laying hen housing systems on egg safety and quality. In: Achieving sustainable production of eggs, Vol 1: Safety and Quality

    Science.gov (United States)

    Transitions in laying hen management and housing systems have constantly occurred throughout the history of commercial egg production. Around the world, there has been a rapid shift in hen housing requirements since the turn of the current century. In most cases, the changes in hen housing require...

  17. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    International Nuclear Information System (INIS)

    Sani, Mohd Shafie; Aziz, Faieza Abdul

    2013-01-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  18. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    Science.gov (United States)

    Shafie Sani, Mohd; Aziz, Faieza Abdul

    2013-06-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  19. Passive houses in Austria: the role of intermediary organisations for the successful transformation of a socio-technical system

    Energy Technology Data Exchange (ETDEWEB)

    Ornetzeder, Michael (Inst. of Technology Assessment of the Austrian Academy of Sciences (Austria)); Rohracher, Harald (IFZ - Inter-Univ. Research Centre for Technology, Work and Culture (Austria))

    2009-07-01

    In Austria, the first passive house was built in 1996. Since then the market for passive houses has rapidly increased. Statistics show that there were more than 4000 residential units with about 10,000 passive house residents at the end of 2006 - more per capita than in any other country of the world. Sustainability requirements, however, have led to profound shifts in the need for collaboration between the actors involved in planning, constructing and using buildings. This paper draws on a qualitative case study to analyse the development and dissemination of passive houses in Austria by focussing on the role of intermediate organisations. Empirically, the paper is based on qualitative interviews with representatives of relevant organisations as well as the analysis of various documentary sources. The case study shows that new types of buildings, such as 'passive houses', have given rise to new actors and organisations to organise integrative planning processes, to set standards and market the passive house concept, to certify components, to transfer knowledge to professionals, to assist consumers in choosing architects, installers and technologies or to organise participation processes. New interest organisations mediate between producers and the policy level, energy agencies act as system builders to transfer these new technologies and practices into the mainstream building sectors, etc. Intermediation processes fulfilled by a broad range of organisations turned out to be of crucial importance for the coordination and shaping of the socio-technical system.

  20. A Model for Industrial Real-Time Systems

    DEFF Research Database (Denmark)

    Bin Waez, Md Tawhid; Wasowski, Andrzej; Dingel, Juergen

    2015-01-01

    Introducing automated formal methods for large industrial real-time systems is an important research challenge. We propose timed process automata (TPA) for modeling and analysis of time-critical systems which can be open, hierarchical, and dynamic. The model offers two essential features for large...

  1. Effective energy management system using ISO 9000/14000 concept industries

    International Nuclear Information System (INIS)

    Asfaazam Kasbani; Kamaruzzaman Sopian

    2006-01-01

    Energy management is a system of managing energy utilization wisely and it includes issues such as energy efficiency (conservation), use of renewable energy, use of technology and development of energy policy. Its benefits has been well known for cost reduction and increase competitiveness and also other indirect impact such as preserving the natural resources and reduction of green-house gases. Although various strategies have been formulated by the government for the industries to adopt energy management, the result seems to be minimal and stagnant in some ways due to the various barriers which exists. Industries on the other hand, have successfully welcomed two famous management system namely the Environmental Management System ISO 14000 and the Quality Management System ISO 9000 to be implemented at their premises. This paper shows how energy management system can be effectively implemented by comparing similar generic management elements of energy management to ISO 9000/14000 standards. The seven (7) elements of energy management system discussed are top management commitment, policy establishment, energy management team, energy audit, energy efficiency projects, monitoring and training

  2. SISTEMA C.– VIVIENDA COLECTIVA A LA CARTA / System C.- A la carte collective housing

    Directory of Open Access Journals (Sweden)

    Elena Corres Álvarez

    2012-05-01

    Full Text Available RESUMEN Sistema de montaje de viviendas en la que el habitante se convierte en parte indispensable de su diseño. Viviendas a la carta que ofrecen múltiples variables sobre las que decidir a la hora de ir completando el resultado definitivo. Las operaciones constructivas se plantean con carácter reversible, para poder realizar cambios a priori en el momento de la ocupación de la vivienda, y cambios a posteriori cuando ésta esté ocupada. El programa, la función, el tamaño, la orientación, la asociación, el equipamiento, el mobiliario... serán algunas de las variables sobre las que operar para completar el módulo habitacional. Los diversos y heterogéneos grupos habitacionales encontrarán en el Sistema C.– la posibilidad de habitar una vivienda según sus gustos y necesidades. Un sistema constructivo sencillo, mediante piezas y elementos fabricados en taller, modulados y codificados que serán montados mediante un equipo formado y especializado en una obra seca en todos sus componentes. Componentes elegidos y dispuestos para lograr la optimización de los recursos materiales, económicos y humanos, todo energéticamente dotado con la máxima calificación. SUMMARY A housing assembly system in which the resident becomes an indispensable factor of the design of their home. A la carte housing which offers the choice of multiple variables when completing the final result. The construction operations are proposed with a reversible character, so as to be able to make changes prior to, and after occupation. The programme, function, size, orientation, association, equipping, furnishing, etc., will be some of the variables to decide upon when finalizing the housing module. With System C, various diverse groups will discover the possibility of inhabiting a home tailored to their tastes and needs. A simple construction system, with workshop manufactured, modularized and coded parts and components that will all be dry assembled by a trained

  3. Reduction of carbon dioxide emissions by solar water heating systems and passive technologies in social housing

    International Nuclear Information System (INIS)

    Bessa, Vanessa M.T.; Prado, Racine T.A.

    2015-01-01

    Growing global concern regarding climate change motivates technological studies to minimize environmental impacts. In this context, solar water heating (SWH) systems are notably prominent in Brazil, primarily because of the abundance of solar energy in the country. However, SWH designs have not always been perfectly developed. In most projects, the installation option of the solar system only considers the electric power economy aspects and not the particular characteristics of each climatic zone. Thus, the primary objective of this paper is to assess the potential of carbon dioxide reduction with the use of SWH in comparison with electric showers in social housing in several Brazilian climatic zones. The Brazilian government authorities have created public policies to encourage the use of these technologies primarily among the low-income population. The results of this paper indicate that hot climactic regions demonstrate a low reduction of CO 2 emissions with SWH installations. Thus, solar radiation is not useful for water heating in those regions, but it does lead to a large fraction of household cooling loads, implying a demand for electrical energy for air conditioning or requiring the adoption of passive techniques to maintain indoor temperatures below threshold values. -- Graphical abstract: Display Omitted -- Highlights: •Brazil has created public policies to increase the use of solar water heating in social housing. •We have evaluated the potential for reduction of CO 2 emissions installing solar water heating. •We have found that the coldest regions have the greatest potential for reducing emissions. •Passive technologies for thermal comfort in hot climate households are more useful than solar water heating systems

  4. Investing in efficient industrial boiler systems in China and Vietnam

    International Nuclear Information System (INIS)

    Yang Ming; Dixon, Robert K.

    2012-01-01

    Energy efficiency in industrial boiler steam systems can be very low due to old technologies, improper design and non-optimal operation of the steam systems. Solutions include efficiency assessments and investments in steam system optimizations, education and training for operators of the systems. This paper presents case studies on assessing and investing in boiler steam systems in China and Vietnam. Methodologies and approaches for data collection and analyses were designed specifically for each of the two countries. This paper concludes: (1) investing in energy efficiency in industrial boiler steam system in China and Vietnam are cost effective; (2) government should not sent national energy efficiency standards lower than that of energy companies or energy equipment manufactures. - Highlights: ► GEF successfully catalyzed investment in industrial energy efficiency boilers in China in 1990s. ► With about $100 million of investment by the GEF/World Bank/Chinese government, the project will mitigate 40 million tons of CO 2 by 2019. ► This generated lowest unit cost of carbon reduction in the world: about $2.5 per ton of CO 2 mitigation. ► Investing in energy efficiency in industrial boiler steam system today in Vietnam will be the same cost effective as in China: $2.1 per ton of CO 2 mitigation.

  5. Industrial steam systems and the energy-water nexus.

    Science.gov (United States)

    Walker, Michael E; Lv, Zhen; Masanet, Eric

    2013-11-19

    This paper presents estimates for water consumption and steam generation within U.S. manufacturing industries. These estimates were developed through the integration of detailed, industry-level fuel use and operation data with an engineering-based steam system model. The results indicate that industrial steam systems consume approximately 3780 TBTU/yr (3.98 × 10(9) GJ/yr) to generate an estimated 2.9 trillion lb/yr (1.3 trillion kg/yr) of steam. Since a good portion of this steam is injected directly into plant processes, vented, leaked, or removed via blowdown, roughly 354 MGD of freshwater must be introduced to these systems as makeup. This freshwater consumption rate is approximately 11% of that for the entire U.S. manufacturing sector, or the total residential consumption rate of Los Angeles, the second largest city in the U.S. The majority of this consumption (>94%) can be attributed to the food, paper, petroleum refining, and chemicals industries. The results of the analyses presented herein provide previously unavailable detail on water consumption in U.S. industrial steam systems and highlight opportunities for combined energy and water savings.

  6. Intelligent data retrieval in the industry experience advisor expert system

    International Nuclear Information System (INIS)

    Swisshelm, J.D.

    1991-01-01

    ABB Impell Corporation developed a prototype expert system called the Industry Experience Advisor for Florida Power and Light Company. This expert system assists plant engineers in evaluating design changes against previous nuclear industry experience. Previous experience is in the form of root causes or lessons learned of past events. The root-cause statements were developed from an engineering review of important event documents [US Nuclear Regulatory Commission information notices (INs) and information bulletins (IBs) and the Institute of Nuclear Power Operations safety evaluation reports and significant operating experience reports]. This paper describes the project that is currently expanding the prototype into a production system for use at a nuclear plant site. The Industry Experience Advisor should be ready for production release by the end of 1991. It will include knowledge of important events through 1990. In 1992 and in each following year, an update will be released adding the previous year's events

  7. Model Oriented Application Generation for Industrial Control Systems

    CERN Document Server

    Copy, B; Blanco Vinuela, E; Fernandez Adiego, B; Nogueira Ferandes, R; Prieto Barreiro, I

    2011-01-01

    The CERN Unified Industrial Control Systems framework (UNICOS) is a software generation methodology and a collection of development tools that standardizes the design of industrial control applications [1]. A Software Factory, named the UNICOS Application Builder (UAB) [2], was introduced to ease extensibility and maintenance of the framework, introducing a stable metamodel, a set of platformindependent models and platformspecific configurations against which code generation plugins and configuration generation plugins can be written. Such plugins currently target PLC programming environments (Schneider and SIEMENS PLCs) as well as SIEMENS WinCC Open Architecture SCADA (previously known as ETM PVSS) but are being expanded to cover more and more aspects of process control systems. We present what constitutes the UNICOS metamodel and the models in use, how these models can be used to capture knowledge about industrial control systems and how this knowledge can be leveraged to generate both code and configuratio...

  8. Information security of industrial control systems: possible attack vectors and protection methods

    Directory of Open Access Journals (Sweden)

    Ignatiy A. Grachkov

    2018-03-01

    obtaining unauthorized access to industrial control systems using the Shodan search engine is described and recommendations how to ensure information security of the industrial control system are given.

  9. Integrated inventory ranking system for oilfield equipment industry

    Directory of Open Access Journals (Sweden)

    Jalel Ben Hmida

    2014-01-01

    Full Text Available Purpose: This case study is motivated by the subcontracting problem in an oilfield equipment and service company where the management needs to decide which parts to manufacture in-house when the capacity is not enough to make all required parts. Currently the company is making subcontracting decisions based on management’s experience. Design/methodology/approach: Working with the management, a decision support system (DSS is developed to rank parts by integrating three inventory classification methods considering both quantitative factors such as cost and demand, and qualitative factors such as functionality, efficiency, and quality. The proposed integrated inventory ranking procedure will make use of three classification methods: ABC, FSN, and VED. Findings: An integration mechanism using weights is developed to rank the parts based on the total priority scores. The ranked list generated by the system helps management to identify about 50 critical parts to manufacture in-house. Originality/value: The integration of all three inventory classification techniques into a single system is a unique feature of this research. This is important as it provides a more inclusive, big picture view of the DSS for management’s use in making business decisions.

  10. Review of neutron radiographic applications in industrial and biological systems

    International Nuclear Information System (INIS)

    Ashraf, M.M.; Khan, A.R.

    1992-10-01

    Neutron radiography is a non-destructive testing technique and is being used worldwide for the design and the development of reactor fuels for research and power reactors. It is also being used for non-destructive examination of nuclear industrial products. In addition to its explosives and other industrial sectors. In addition to its applications in industrial sectors, the technique is widely used for research and development activities in biological systems. A review of technical applications of neutron radiography in different fields particularly in nuclear fuel management, aerospace industry, explosives and biology is presented. The methodology of neutron radiography is also discussed in detail along with the advantages of the technique. In addition, the potential of the neutron radiography facility at PINSTECH has been described. (author)

  11. Urban Integrated Industrial Cogeneration Systems Analysis. Phase II final report

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    Through the Urban Integrated Industrial Cogeneration Systems Analysis (UIICSA), the City of Chicago embarked upon an ambitious effort to identify the measure the overall industrial cogeneration market in the city and to evaluate in detail the most promising market opportunities. This report discusses the background of the work completed during Phase II of the UIICSA and presents the results of economic feasibility studies conducted for three potential cogeneration sites in Chicago. Phase II focused on the feasibility of cogeneration at the three most promising sites: the Stockyards and Calumet industrial areas, and the Ford City commercial/industrial complex. Each feasibility case study considered the energy load requirements of the existing facilities at the site and the potential for attracting and serving new growth in the area. Alternative fuels and technologies, and ownership and financing options were also incorporated into the case studies. Finally, site specific considerations such as development incentives, zoning and building code restrictions and environmental requirements were investigated.

  12. ABUJA SUSTAINABLE SPATIAL HOUSING DESIGN: A SPATIAL ...

    African Journals Online (AJOL)

    Bons

    2017-02-02

    Feb 2, 2017 ... elements of the regional development plan for the Territory, the plan ... use, transportation systems, infrastructure, housing and other services in a .... in properly surveyed, serviced and legally conveyed developments .... human resources. .... Large objects, such as industrial parks, highways, and shopping ...

  13. Techno-Economic Optimization of a Sustainable Energy System for a 100% Renewables Smart House

    DEFF Research Database (Denmark)

    Craciun, Vasile Simion; Blarke, Morten; Trifa, Viorel

    2012-01-01

    technical and economic challenges. One such challenge is the discontinuity, or intermittency, of generation, as most renewable energy resources depend on the climate, which is why their use requires complex design, planning and control optimization strategies. This paper presents a model and optimization...... for a sustainable energy system for a 100% renewables based Smart House (SH). We have devised and analysed an innovative high-efficiency approach to residential energy supply. The analysis involves detailed technical specifications and considerations for providing optimal supply of electricity, heating, cooling......The continuous increasing negative effects of fossil fuel consumption on society and the environment, opens a major interest into environmentally friendly alternatives to sustain the increasing demand for energy services. Despite the obvious advantages of renewable energy, it presents important...

  14. OSIRIS, an entirely in-house developed drug discovery informatics system.

    Science.gov (United States)

    Sander, Thomas; Freyss, Joel; von Korff, Modest; Reich, Jacqueline Renée; Rufener, Christian

    2009-02-01

    We present OSIRIS, an entirely in-house developed drug discovery informatics system. Its components cover all information handling aspects from compound synthesis via biological testing to preclinical development. Its design principles are platform and vendor independence, a consistent look and feel, and complete coverage of the drug discovery process by custom tailored applications. These include electronic laboratory notebook applications for biology and chemistry, tools for high-throughput and secondary screening evaluation, chemistry-aware data visualization, physicochemical property prediction, 3D-pharmacophore comparisons, interactive modeling, computing grid based ligand-protein docking, and more. Most applications are developed in Java and are built on top of a Java library layer that provides reusable cheminformatics functionality and GUI components such as chemical editors, structure canonicalization, substructure search, combinatorial enumeration, enhanced stereo perception, force field minimization, and conformation generation.

  15. Scout house in Koeniz - Refurbishment of the heating system; Pfadiheim Weiermatt, Sanierung Waermeversorgung - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Messerli, A. [Neuenschwander - Neutair AG, Berne (Switzerland); Jenni, H. [Heimverein Falkenstein, Koeniz (Switzerland)

    2004-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) presents the results of a project carried out in Koeniz, Switzerland. The report examines how the energy situation at the local scout house was improved. The work included the refurbishment of the heating system using solar collectors, intelligently controlled heat pumps, a photovoltaics installation and even solar-powered street lighting. The project, which received a substantial echo from the general public, is described. The scouts were directly involved in the project and, in part, in the construction work. This, according to the authors, enhanced the educational aspect of the project. The report presents details on the various installations and is illustrated with schematics and photos. Also, the results of monitoring and measurements made are presented.

  16. Protein design in systems metabolic engineering for industrial strain development.

    Science.gov (United States)

    Chen, Zhen; Zeng, An-Ping

    2013-05-01

    Accelerating the process of industrial bacterial host strain development, aimed at increasing productivity, generating new bio-products or utilizing alternative feedstocks, requires the integration of complementary approaches to manipulate cellular metabolism and regulatory networks. Systems metabolic engineering extends the concept of classical metabolic engineering to the systems level by incorporating the techniques used in systems biology and synthetic biology, and offers a framework for the development of the next generation of industrial strains. As one of the most useful tools of systems metabolic engineering, protein design allows us to design and optimize cellular metabolism at a molecular level. Here, we review the current strategies of protein design for engineering cellular synthetic pathways, metabolic control systems and signaling pathways, and highlight the challenges of this subfield within the context of systems metabolic engineering. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Effect of a commercial housing system on egg quality during extended storage.

    Science.gov (United States)

    Jones, D R; Karcher, D M; Abdo, Z

    2014-05-01

    Egg producers in the United States are utilizing a variety of commercial egg production systems to provide consumer choice and meet legislative requirements. Consumer egg grades in the United States were developed for conventional cage production, and it is unclear what effect alternative production systems might have on egg quality during retail and consumer home storage. The current study was undertaken to determine what changes in egg quality characteristics occur during extended cold storage for commercially produced conventional cage, enriched colony cage, and cage-free aviary eggs. During 12 wk of cold storage, egg weight, albumen height, Haugh unit, static compression shell strength, vitelline membrane strength and deformation, yolk index, shell dynamic stiffness, and whole egg total solids were monitored. Overall, aviary and enriched eggs were significantly (P system effects for yolk measurements, shell dynamic stiffness, or whole egg total solids were observed. Albumen height, Haugh unit, and yolk quality measurements were all greatest at 0 and lowest at 12 wk of storage (P systems for each measured attribute at 4, 6, and 12 wk was determined. Other than differences in the change of egg weight at 4 wk, no significant differences in the rate of quality decline were found among the housing systems. The results of the current study indicate that current US egg quality standards should effectively define quality for commercially produced conventional cage, enriched colony cage, and cage-free aviary eggs.

  18. Physics Simulation Software for Autonomous Propellant Loading and Gas House Autonomous System Monitoring

    Science.gov (United States)

    Regalado Reyes, Bjorn Constant

    2015-01-01

    1. Kennedy Space Center (KSC) is developing a mobile launching system with autonomous propellant loading capabilities for liquid-fueled rockets. An autonomous system will be responsible for monitoring and controlling the storage, loading and transferring of cryogenic propellants. The Physics Simulation Software will reproduce the sensor data seen during the delivery of cryogenic fluids including valve positions, pressures, temperatures and flow rates. The simulator will provide insight into the functionality of the propellant systems and demonstrate the effects of potential faults. This will provide verification of the communications protocols and the autonomous system control. 2. The High Pressure Gas Facility (HPGF) stores and distributes hydrogen, nitrogen, helium and high pressure air. The hydrogen and nitrogen are stored in cryogenic liquid state. The cryogenic fluids pose several hazards to operators and the storage and transfer equipment. Constant monitoring of pressures, temperatures and flow rates are required in order to maintain the safety of personnel and equipment during the handling and storage of these commodities. The Gas House Autonomous System Monitoring software will be responsible for constantly observing and recording sensor data, identifying and predicting faults and relaying hazard and operational information to the operators.

  19. Attacks to Cryptography Protocols of Wireless Industrial Communication Systems

    Directory of Open Access Journals (Sweden)

    Tomas Ondrasina

    2010-01-01

    Full Text Available The paper deals with problems of safety and security principles within wireless industrial communication systems. First safety requirements to wireless industrial communication system, summarisation of attack methods and the available measures for risks elimination are described with orientation to safety critical applications. The mainly part is oriented to identification of risks and summarisation of defensive methods of wireless communication based on cryptographic techniques. Practical part the cryptoanalytic’s attacks to COTS (Commercial Off-The-Shelf wireless communications are mentioned based on the IEEE 802.11 standards.

  20. Performance of the second generation solar heating system in the solar house of the Eindhoven University of Technology

    NARCIS (Netherlands)

    Bisschops, R.W.G.; van Koppen, C.W.J.; Veltkamp, W.B.; Ouden, den C.

    1984-01-01

    Summer 1981 a new solar heating system has been installed in the Solar House at the E.U.T. The principal features of the system are Philips VTR 261 evacuated tube collectors, integration of the auxiliary heater with the (stratified water) storage and application of the new, balanced flow control

  1. Low cost Polymer Optical Fibre based transmission system for feeding integrated broadband wireless in-house LANs

    NARCIS (Netherlands)

    Ng'Oma, A.; Koonen, A.M.J.; Tafur Monroy, I.; Boom, van den H.P.A.; Smulders, P.F.M.; Khoe, G.D.; Visser, D. Taco; Lenstra, Daan; Schouten, F. Hugo

    2002-01-01

    A bi-directional transmission system using low cost Polymer Optical Fibre (POF) to feed the required large number of radio access points in next-generation integrated broadband wireless in-house LANs is proposed. Results from simulations and experiments show that, by tuning system parameters, a

  2. Application of CPLD in the industrial CT system

    International Nuclear Information System (INIS)

    Qi Mingrui; Li Jianmin; Zhao Haotong

    2004-01-01

    The application of CPLD (Complex Programmable Logic Devices) in the industrial CT system is discussed. The paper gives an architecture design and the realization of synchronized trigger module in the scan control sub-system; and also presents the circuit diagram and some result in detail. In the experimental CT system, it is well proved that the application of in-system programmable device supplies many advantages: the complexion of system and circuit is reduced; the process of debug and test is very simple; the system is flexible and the testing time is short. (authors)

  3. Industrial application of PV/T solar energy systems

    International Nuclear Information System (INIS)

    Kalogirou, S.A.; Tripanagnostopoulos, Y.

    2007-01-01

    Hybrid photovoltaic/thermal (PV/T) systems consist of PV modules and heat extraction units mounted together. These systems can simultaneously provide electrical and thermal energy, thus achieving a higher energy conversion rate of the absorbed solar radiation than plain photovoltaics. Industries show high demand of energy for both heat and electricity and the hybrid PV/T systems could be used in order to meet this requirement. In this paper the application aspects in the industry of PV/T systems with water heat extraction is presented. The systems are analyzed with TRNSYS program for three locations Nicosia, Athens and Madison that are located at different latitudes. The system comprises 300 m 2 of hybrid PV/T collectors producing both electricity and thermal energy and a 10 m 3 water storage tank. The work includes the study of an industrial process heat system operated at two load supply temperatures of 60 deg. C and 80 deg. C. The results show that the electrical production of the system, employing polycrystalline solar cells, is more than the amorphous ones but the solar thermal contribution is slightly lower. A non-hybrid PV system produces about 25% more electrical energy but the present system covers also, depending on the location, a large percentage of the thermal energy requirement of the industry considered. The economic viability of the systems is proven, as positive life cycle savings are obtained in the case of hybrid systems and the savings are increased for higher load temperature applications. Additionally, although amorphous silicon panels are much less efficient than the polycrystalline ones, better economic figures are obtained due to their lower initial cost, i.e., they have better cost/benefit ratio

  4. A quality system for PET: An industry perspective

    International Nuclear Information System (INIS)

    Zigler, Steven S.; Breslow, Kenneth; Nazerias, Michael

    2005-01-01

    Quality systems have been employed in a variety of industries to develop and supply products that meet customer expectations and regulatory requirements. Most quality systems address organizational structure, design controls, production, complaints, audits, corrective actions and preventive actions. This paper describes PETNET's efforts to develop a quality system for use in the production of PET tracers. Our goal is to ensure quality products and to facilitate compliance with impending PET good manufacturing practice (GMP) regulations

  5. Market development directory for solar industrial process heat systems

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-02-01

    The purpose of this directory is to provide a basis for market development activities through a location listing of key trade associations, trade periodicals, and key firms for three target groups. Potential industrial users and potential IPH system designers were identified as the prime targets for market development activities. The bulk of the directory is a listing of these two groups. The third group, solar IPH equipment manufacturers, was included to provide an information source for potential industrial users and potential IPH system designers. Trade associates and their publications are listed for selected four-digit Standard Industrial Code (SIC) industries. Since industries requiring relatively lower temperature process heat probably will comprise most of the near-term market for solar IPH systems, the 80 SIC's included in this chapter have process temperature requirements less than 350/sup 0/F. Some key statistics and a location list of the largest plants (according to number of employees) in each state are included for 15 of the 80 SIC's. Architectural/engineering and consulting firms are listed which are known to have solar experience. Professional associated and periodicals to which information on solar IPH sytstems may be directed also are included. Solar equipment manufacturers and their associations are listed. The listing is based on the SERI Solar Energy Information Data Base (SEIDB).

  6. Carboy Security Testing and Training Programs for Industrial Control Systems

    International Nuclear Information System (INIS)

    Noyes, Daniel

    2012-01-01

    Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These training vary from web-based cyber security training for control systems engineers to more advanced hands-on training that culminates with a Red Team/Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors

  7. Cyber Security Testing and Training Programs for Industrial Control Systems

    International Nuclear Information System (INIS)

    Noyes, Daniel

    2012-01-01

    Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These trainings vary from web-based cyber security trainings for control systems engineers to more advanced hands-on training that culminates with a Red Team/ Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.

  8. Cyber Security Testing and Training Programs for Industrial Control Systems

    Energy Technology Data Exchange (ETDEWEB)

    Daniel Noyes

    2012-03-01

    Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These trainings vary from web-based cyber security trainings for control systems engineers to more advanced hands-on training that culminates with a Red Team/ Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.

  9. Optimisation of single-pipe heating systems with heating cost distribution and supporting room air processes in industrial housing construction in the new Laender. Pt. 2. Heating cost distribution and energy diagnosis; Optimierung von Einrohrheizungsanlagen mit Heizkostenverteilung sowie flankierenden Raumluftprozessen im industriellen Wohnungsbau der NBL. T. 2. Heizkostenverteilung und Energiediagnose

    Energy Technology Data Exchange (ETDEWEB)

    Bach, H; Bauer, M; Eisenmann, G; Haupt, C; Tritschler, M

    1996-12-01

    The second part of the present research report focusses on energy diagnosis and heating cost distribution in single-pipe heating systems. It describes energy diagnosis with regard to its aims and methods. The subject of heating cost distribution is addressed with a statistical evaluation of the field studies carried out in the course of the research project. The use of heating cost distributors is examined by simulation calculations and assessed on this basis. (HW) [Deutsch] Die Themenschwerpunkte des 2. Teils des Forschungsberichtes sind die Energiediagnose und die Heizkostenverteilung in Einrohranlagen. Bezueglich der Energiediagnose werden Ziel und Methoden beschrieben. Zur Thematik Heizkostenverteilung werden die durchgefuehrten Feldversuche statistisch ausgewertet. Der Einsatz der Heizkostenverteilsysteme wird durch Simulationsrechnungen untersucht und beurteilt. (HW)

  10. Develop security architecture for both in-house healthcare information systems and electronic patient record

    Science.gov (United States)

    Zhang, Jianguo; Chen, Xiaomeng; Zhuang, Jun; Jiang, Jianrong; Zhang, Xiaoyan; Wu, Dongqing; Huang, H. K.

    2003-05-01

    In this paper, we presented a new security approach to provide security measures and features in both healthcare information systems (PACS, RIS/HIS), and electronic patient record (EPR). We introduced two security components, certificate authoring (CA) system and patient record digital signature management (DSPR) system, as well as electronic envelope technology, into the current hospital healthcare information infrastructure to provide security measures and functions such as confidential or privacy, authenticity, integrity, reliability, non-repudiation, and authentication for in-house healthcare information systems daily operating, and EPR exchanging among the hospitals or healthcare administration levels, and the DSPR component manages the all the digital signatures of patient medical records signed through using an-symmetry key encryption technologies. The electronic envelopes used for EPR exchanging are created based on the information of signers, digital signatures, and identifications of patient records stored in CAS and DSMS, as well as the destinations and the remote users. The CAS and DSMS were developed and integrated into a RIS-integrated PACS, and the integration of these new security components is seamless and painless. The electronic envelopes designed for EPR were used successfully in multimedia data transmission.

  11. Behavior and milk production of buffalo cows as affected by housing system.

    Science.gov (United States)

    De Rosa, G; Grasso, F; Braghieri, A; Bilancione, A; Di Francia, A; Napolitano, F

    2009-03-01

    To verify the effect of 2 housing systems (with and without a pool and an ample outdoor lot) on behavior and milk yield, 45 lactating buffalo cows were group-housed in a free stall open-sided barn with concrete floor where they received 10 m(2)/head as space allowance (group NP); 43 cows were group-housed in a similar barn, but had access to an outdoor yard (36 m(2)/head) and a concrete pool of 208 m(2) (group WP). Animals were subjected to 8 sessions of instantaneous scan sampling at approximately 10-d intervals. Behavioral variables were expressed as proportions of subjects observed in each category of posture and activity. In addition, rapid behaviors such as agonistic, social, and reproductive interactions, social licking, and self-grooming were recorded continuously. These variables were expressed as number of interactions per animal. At the end of each hour of observation, temperature and relative humidity were recorded. In WP the proportion of animals observed wallowing was 0.476 +/- 0.034, whereas lower proportions were observed standing (0.389 +/- 0.029) or lying (0.141 +/- 0.021) outside the pool. In NP the proportions of animals observed standing and lying were 0.452 +/- 0.042 and 0.548 +/- 0.042, respectively. A significant relationship between mean temperatures recorded on observation days and proportion of animals in the pool was observed (r(s) = 0.41). Fewer animals from group WP were observed idling compared with buffaloes from group NP (0.44 +/- 0.024 vs. 0.509 +/- 0.024, respectively), whereas more WP animals were involved in investigative activities than NP cows (0.099 +/- 0.009 vs. 0.042 +/- 0.009, respectively). A greater number of social interactions (sniffing and nuzzling) and social lickings were observed in group WP than in group NP (0.120 +/- 0.010 vs. 0.067 +/- 0.010, and 0.151 +/- 0.018 vs. 0.090 +/- 0.018, respectively). The WP buffalo cows had a greater milk yield than NP cows (11.73 +/- 0.31 vs. 10.78 +/- 0.28 kg/d, respectively

  12. Aerogel-Based Insulation for Industrial Steam Distribution Systems

    Energy Technology Data Exchange (ETDEWEB)

    John Williams

    2011-03-30

    Thermal losses in industrial steam distribution systems account for 977 trillion Btu/year in the US, more than 1% of total domestic energy consumption. Aspen Aerogels worked with Department of Energy’s Industrial Technologies Program to specify, develop, scale-up, demonstrate, and deliver Pyrogel XT®, an aerogel-based pipe insulation, to market to reduce energy losses in industrial steam systems. The product developed has become Aspen’s best selling flexible aerogel blanket insulation and has led to over 60 new jobs. Additionally, this product has delivered more than ~0.7 TBTU of domestic energy savings to date, and could produce annual energy savings of 149 TBTU by 2030. Pyrogel XT’s commercial success has been driven by it’s 2-4X better thermal performance, improved durability, greater resistance to corrosion under insulation (CUI), and faster installation times than incumbent insulation materials.

  13. Industrial pollution load assessment in Phnom Penh, Cambodia using an industrial pollution projection system.

    Science.gov (United States)

    San, Vibol; Spoann, Vin; Schmidt, Johannes

    2018-02-15

    Approximately 56% out of the total 1302 Cambodian firms are operated in the Capital city of Cambodia. The necessary information on industrial pollution to set strategies, priorities and action plans on environmental protection issues is absent in Cambodia. In the absence of this data, effective environmental protection cannot be implemented. The objective of this study is to estimate industrial pollution load by employing the Industrial Pollution Projection System, a rapid environmental management tool for assessment of pollution load, to produce a scientific rational basis for preparing future policy direction to reduce industrial pollution in Phnom Penh city. Factory data between 1994 and 2014 obtained from the Ministry of Industry and Handicraft of Cambodia were used in our study. Due to the high number of employees, the total environmental load generated in Phnom Penh city was estimated to be 476,981Mg in 2014. Phnom Penh city generated 189,109Mg of VOC, 165,411Mg of toxic chemicals to air, 38,523Mg of toxic chemicals to land, and 28,968Mg of SO 2 in 2014. The results of the estimation show that the Textiles and Apparel sector was the highest generators of toxic chemicals into land and air, and toxic metals into land, air and water, while the Basic Metal sector was the greatest contributor of toxic chemicals to water. The Textiles and Apparel sector alone emitted 436,016Mg of total pollution load. The results indicate that the Dangkao and Meanchey districts were the greatest emitters of all pollutants in Phnom Penh. The results suggest that reduction in industrial pollution could be achieved by focusing on the most polluting sectors and areas. Adopting waste minimization strategies, which include cleaner production processes, will not only reduce the cost of controlling pollution, it will also make manufacturing more efficient thereby increasing profits while reducing pollution load in the long run. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. failures diagnosis. Theory and practice for industrial systems

    International Nuclear Information System (INIS)

    Zwingelstein, G.

    1995-01-01

    Failure diagnosis methods represent appreciable tools for the maintenance and the improvement of availability and safety in complex industrial installations. The industrial diagnosis can be assimilated to a deterministic causality relation between the cause and the effect. This book describes the methodology associated to the resolution of the diagnosis problem applied to complex industrial system failures, and evaluates the principles of the main diagnosis methods. The introduction presents the terminology and norms used in the industry to situate the diagnosis context in the possession cost of a product. After a formulation of the diagnosis in the form of the resolution of inverse problems, the author gives details about the inductive and deductive methods and about internal and external diagnosis methods. Each method is illustrated with examples taken in the industry with recommendations about their operating limitations. Finally, a guideline summarizes the principal criteria for the selection of an industrial diagnosis method according to the available informations. (J.S.). 168 refs., 294 figs., 22 tabs., 1 annexe

  15. Industry

    International Nuclear Information System (INIS)

    Schindler, I.; Wiesenberger, H.

    2001-01-01

    This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

  16. Active house concept versus passive House

    NARCIS (Netherlands)

    Zeiler, W.; Boxem, G.; Vehler, R.; Verhoeven, M.; Fremouw, M.

    2009-01-01

    The passive house concept is the present trend in energy efficient sustainable dwellings. Within the passive house concept every effort is made to minimize the energy use. Substantial savings can be achieved by passive energy systems, especially natural ventilation, summer shading and winter solar

  17. Housing culture

    DEFF Research Database (Denmark)

    Roesdahl, Else; Scholkmann, Barbara

    2007-01-01

    On houses and their furniture and fittings, and on the study of this - with a comparison of rural, urban, monastic and aristocratic housing, and a special section on heating technologies.......On houses and their furniture and fittings, and on the study of this - with a comparison of rural, urban, monastic and aristocratic housing, and a special section on heating technologies....

  18. Industrial Unionism and Its Bargaining Correlates in Nigeria Industrial Relations System

    OpenAIRE

    Francis C. Anyim; Joy Onyinyechi Ekwoaba; Adedoyinsola Olajumoke Shonuga

    2013-01-01

    Between 1960-1966, industrial relations system in Nigeria was based on Laissez-faire doctrine or voluntary ethic. The colonial trade union ordinance of 1938 allowed any five or more persons to form trade unions. The trend led to the proliferation of over 1000 mushroom unions which were not well organized and badly managed. Besides, all was not well with the organization, administration, finance, leadership and foreign relations of the unions. It was against this backdrop that government initi...

  19. Improving Steam System Performance: A Sourcebook for Industry

    Energy Technology Data Exchange (ETDEWEB)

    2002-06-01

    The sourcebook is a reference for industrial steam system users, outlining opportunities to improve steam system performance. This Sourcebook is designed to provide steam system users with a reference that describes the basic steam system components, outlines opportunities for energy and performance improvements, and discusses the benefits of a systems approach in identifying and implementing these improvement opportunities. The Sourcebook is divided into the following three main sections: Section 1: Steam System Basics--For users unfamiliar with the basics of steam systems, or for users seeking a refresher, a brief discussion of the terms, relationships, and important system design considerations is provided. Users already familiar with industrial steam system operation may want to skip this section. This section describes steam systems using four basic parts: generation, distribution, end use, and recovery. Section 2: Performance Improvement Opportunities--This section discusses important factors that should be considered when industrial facilities seek to improve steam system performance and to lower operating costs. This section also provides an overview of the finance considerations related to steam system improvements. Additionally, this section discusses several resources and tools developed by the U. S. Department of Energy's (DOE) BestPractices Steam Program to identify and assess steam system improvement opportunities. Section 3: Programs, Contacts, and Resources--This section provides a directory of associations and other organizations involved in the steam system marketplace. This section also provides a description of the BestPractices Steam Program, a directory of contacts, and a listing of available resources and tools, such as publications, software, training courses, and videos.

  20. Effect of dietary supplementation of probiotics and enzymes on the haematology of rabbits reared under two housing systems

    Directory of Open Access Journals (Sweden)

    Sarat Chandra Amaravadhi

    Full Text Available Aim : To study the influence of housing system and dietary supplementation of probiotics and enzymes on haematological parameters of rabbits. Materials and Methods: A total of 144 weaned rabbits were divided into 2 groups of 72 in each group and housed under conventional cage system and backyard system. The rabbits in each housing system were divided into 4 groups of 18 in each group and the diets were supplemented with probiotics, enzymes and both. Results: The housing system and supplementation of probiotics and enzymes did not exert significant influence on any of the haematological parameters studied. However, there was slight positive influence of probiotic and enzyme supplementation on the health status of rabbits as revealed by haematological parameters. The overall mean Total erythrocyte count, total leucocyte count, lymphocytes, neutrophils, eosinophils, monocytes, haemoglobin and packed cell volume were 7.52, 6.29 (103/mm3, 60.27%, 35.71%, 1.35%, 1.92%, 10.67 g/dl and 34.25%, respectively. Conclusion: Rabbits can be reared on low input backyard system without any adverse effect on health and supplementation of probiotics and enzymes had a positive influence on health status of rabbits. [Vet World 2012; 5(12.000: 748-753

  1. SAFARI: An Environment for Creating Tutoring Systems in Industrial Training.

    Science.gov (United States)

    Gecsei, J.; Frasson, C.

    Safari is a cooperative project involving four Quebec universities, two industrial partners (Virtual Prototypes, Inc., providing the VAPS software package, and Novasys, Inc., a consulting firm specializing in artificial intelligence and training), and government. VAPS (Virtual Applications Prototyping System) is a commercial interface-building and…

  2. Nanocoatings for High-Efficiency Industrial Hydraulic and Tooling Systems

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-05-01

    This factsheet describes a research project whose goal is to develop degradation-resistant nano-coatings of AlMgB14 and AlMgB14– (titanium diboride) TiB2 that result in improved surface hardness and reduced friction for industrial hydraulic and tooling systems.

  3. Industrial variographic analysis for continuous sampling system validation

    DEFF Research Database (Denmark)

    Engström, Karin; Esbensen, Kim Harry

    2017-01-01

    Karin Engström, LKAB mining, Kiruna, Sweden, continues to present illuminative cases from process industry. Here she reveals more from her ongoing PhD project showing application of variographic characterisation for on-line continuous control of process sampling systems, including the one...

  4. ISO 14001 ENVIRONMENTL MANAGEMENT SYSTEMS IN GOVERNMENT AND INDUSTRY

    Science.gov (United States)

    Two new USEPA documents address environmental management systems (EMS) from the perspectives of government and industry and are offered as tools for understanding the process of the ISO 14000 Standards development and usefulness of an EMS approach. The first document, ISO 14001 -...

  5. Geothermal Heat Pump System for New Student Housing Project at the University at Albany Main Campus

    Energy Technology Data Exchange (ETDEWEB)

    Lnu, Indumathi [Univ. of Albany, NY (United States)

    2015-08-27

    University at Albany successfully designed, constructed and is operating a new student housing building that utilizes ground source heat pump (GSHP) for heating and cooling the entire 191,500SF building. The installed system consists of a well field with 150 bores, 450 feet deep and (189) terminal heat pump units for a total capacity of 358 Tons cooling and 4,300 MBtu/h heating. The building opened in Fall 2012. The annual energy use and cost intensity of the building, after the changes made during the first 2 years’ of operation is 57kBtu/SF/Year and $1.30/SF/Year respectively. This is approximately 50% lower than the other residential quads on campus, despite the fact that the quads are not air-conditioned. The total project cost from design through 3-years of operations is approximately $6 Million, out of which $5.7 Million is for construction of the GSHP system including the well field. The University received a $2.78 Million grant from the Department of Energy. The estimated utility cost savings, compared to a baseline building with conventional HVAC system, is approximately $185,000. The estimated simple payback, after grant incentives, is 15 years. Additionally, the project has created 8.5FTE equivalent jobs.

  6. Housing system influences abundance of Pax3 and Pax7 in postnatal chicken skeletal muscles.

    Science.gov (United States)

    Yin, H D; Li, D Y; Zhang, L; Yang, M Y; Zhao, X L; Wang, Y; Liu, Y P; Zhu, Q

    2014-06-01

    Paired box (Pax) proteins 3 and 7 are associated with activation of muscle satellite cells and play a major role in hyperplastic and hypertrophic growth in postnatal skeletal muscle fibers. The objective of this study was to evaluate the effect of housing system on abundance of Pax3 and Pax7 in postnatal chicken skeletal muscles. At 42 d, 1,200 chickens with similar BW were randomly assigned to cage, pen, and free-range group. The mRNA abundance was measured in pectoralis major and thigh muscle at d 56, 70, and 84, and the protein expression was quantified at d 84. Increases in mRNA abundance of PAX3 and PAX7 with age were less pronounced in caged system chickens than in pen and free-range chickens from d 56 to 84, and free-range chickens showed a more pronounced increase in gene expression with age compared with penned chickens. At d 84, quantities of PAX3 and PAX7 mRNA and protein were highest in both pectoralis major and thigh muscle of chickens raised in the free-range group, lowest in penned chickens, and intermediate in caged chickens (P system may influence muscle fiber muscle accretion by coordinating the expression of Pax3 and Pax7 in adult chicken skeletal muscles. Poultry Science Association Inc.

  7. Startup of the experimental physics industrial control system at NSTX

    International Nuclear Information System (INIS)

    Sichta, P.; Dong, J.

    1999-01-01

    The Experimental Physics Industrial Control System (EPICS) is a set of software which is being used as the basis of the National Spherical Torus Experiment's (NSTX) Process Control System, a major element of the NSTX's Central Instrumentation and Control System. EPICS is a result of a co-development effort started by several US Department of Energy National Laboratories. EPICS is actively supported through an international collaboration made up of government and industrial users. EPICS' good points include portability, scalability, and extensibility. A drawback for small experiments is that a wide range of software skills are necessary to get the software tools running for the process engineers. The authors' experience in designing, developing, operating, and maintaining NSTX's EPICS (system) will be reviewed

  8. Radon space techniques for the evaluation of industrial tomography systems

    International Nuclear Information System (INIS)

    Burge, R.E.; Wombell, R.J.; Belchamber, R.M.; Betteridge, D.; Lilley, T.

    1987-01-01

    Computerised tomography (CT) is a powerful tool in medicine, and would be well suited to a wide range of industrial applications, particularly non-destructive testing. However, the very diversity of uses makes the production of a standardised scanner impossible. Systems for an industrial use will have to be designed with a problem in mind. An approach is presented for the analysis of CT scanning systems to help in the design problem. It first describes a system in terms of the sampling of the Radon transform of the object and then uses this information to produce a spatial description of the performance of a scanning system in terms of data collection. This description is called a resolution map and it is shown how the resolution map can be related to the object under study. (author)

  9. Products, practices and processes: exploring the innovation potential for low-carbon housing refurbishment among small and medium-sized enterprises (SMEs) in the UK construction industry

    International Nuclear Information System (INIS)

    Killip, Gavin

    2013-01-01

    Scenario-based studies agree that the technical potential for CO 2 emissions reduction from the housing stock is large. This paper explores how a market might be developed for the refurbishment activities assumed in these scenarios, taking the existing market for repair, maintenance and improvement (RMI) as its starting point. Interviews with 16 small and medium-sized enterprises (SMEs) in the construction industry reveal the interdependence of products, practices and processes in housing renovation activities. Conservative practice as well as innovation can be understood as the outcome of multi-lateral influences on firms from other firms, clients, the material buildings and products in their working lives, and from regulations and regulators. Contractors' openness to innovation is contingent on an informal approach to risk assessment, taking account of cost, time efficiency, client demands, and installer confidence in the reliability of the resulting work. The implications of the research are discussed in relation to the need for new practices and processes on refurbishment projects, raising questions for future research on key questions of quality assurance, performance over time, the application of standards, and vocational training. -- Highlights: •Repair, maintenance and improvement works are triggers for low-carbon refurbishment. •Millions of property owners and small firms make for fragmented decision-making. •Actor-Network Theory is used to frame decision-making processes for refurbishment. •Small builders can be innovative if clients allow time and money for experimentation. •Energy policy for existing homes needs to engage with the construction sector

  10. Air Quality in Alternative Housing Systems may have an Impact on Laying Hen Welfare. Part II—Ammonia

    Directory of Open Access Journals (Sweden)

    Bruce David

    2015-09-01

    Full Text Available The EU ban on conventional barren cages for laying hens from 2012 has improved many aspects of laying hen welfare. The new housing systems allow for the expression of highly-motivated behaviors. However, the systems available for intensive large-scale egg production (e.g., aviaries, floor housing systems, furnished cages may cause other welfare challenges. We have reviewed the literature regarding the health, behavior, production characteristics, and welfare of laying hens when exposed to ammonia in their housing environment. Concentrations of ammonia gas are commonly high in aviaries and floor housing systems in which manure is not regularly removed, whereas they are usually lower in furnished cages. High levels are found during the cold season when ventilation flow is often reduced. Ammonia is a pungent gas, and behavioral studies indicate chickens are averse to the gas. High concentrations of gaseous ammonia can have adverse health effects and, when very high, even influence production performance. The most profound effects seen are the occurrence of lesions in the respiratory tract and keratoconjunctivitis. There is also evidence that high ammonia concentrations predispose poultry to respiratory disease and secondary infections. We conclude that there are animal welfare challenges related to high ammonia levels, and that immediate actions are needed. Development of improved systems and management routines for manure removal and ventilation will be important for the reduction of ammonia levels and hence will contribute to safeguarding hen welfare.

  11. Positioning of sensors for control of ventilation systems in broiler houses: a case study

    Directory of Open Access Journals (Sweden)

    Thayla Morandi Ridolfi de Carvalho Curi

    Full Text Available ABSTRACT Ventilation systems are incorporated at intensive poultry farms to control environment conditions and thermal comfort of broilers. The ventilation system operates based on environmental data, particularly measured by sensors of temperature and relative humidity. Sensors are placed at different positions of the facility. Quality, number and positioning of the sensors are critical factors to achieve an efficient performance of the system. For this reason, a strategic positioning of the sensors associated to controllers could support the maintenance and management of the microclimate inside the facility. This research aims to identify the three most representative points for the positioning of sensors in order to support the ventilation system during the critical period from 12h00 to 15h00 on summer days. Temperature, relative humidity and wind speed were measured in four different tunnel ventilated barns at the final stage of the production cycle. The descriptive analysis was performed on these data. The Temperature and Humidity Index (THI was also calculated. Then, the geostatistical analysis of THI was performed by GS+ and the position of sensors was determined by ordinary kriging. The methodology was able to detect the most representative points for the positioning of sensors in a case study (southeastern Brazil. The results suggested that this strategic positioning would help controllers to obtain a better inference of the microclimate during the studied period (the hottest microclimate, considered critical in Brazil. In addition, these results allow developing a future road map for a decision support system based on 24 h monitoring of the ventilation systems in broiler houses.

  12. 20 CFR 654.407 - Housing.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Housing. 654.407 Section 654.407 Employees... EMPLOYMENT SERVICE SYSTEM Housing for Agricultural Workers Housing Standards § 654.407 Housing. (a) Housing... occupants against the elements. (b) Housing shall have flooring constructed of rigid materials, smooth...

  13. Applications Of A Low Cost System For Industrial Automatic Inspection

    Science.gov (United States)

    Krey, C.; Ayache, A.; Bruel, A.

    1987-05-01

    In industrial environment, some repetitive tasks wich do not need a high degree of understanding, can be solved automatically owing to Vision. Among the systems available on the market, most of them are rather expensive with various capabilities. The described system is a modular system, built with some standard circuit boards. One of the advantages of this system is that its architecture can be redefined for each application, by assembling judiciously the standard modules. The vision system has been used successfully to sort fruits according to their colour and diameter. The system can sort 8 fruits per second on each sorting line and manage simultaneously up to 16 lines. An application of sheep skin cutting has been implemented too. After chemical and mechanical treatments, the skins present many defaults all around their contour, that must be cut off. A movable camera follows and inspects the contour ; the vision system determines where the cutting device must cut the skin. A third application has been implemented ; it concerns automatic recording and reproduction of logotypes. A moving camera driven by the system picks up the points, of the logotype contours. Before reproduction, programs can modify the logotypes shape, change the scale, and so on. For every application, the system uses the world smallest CCD camera developped in the laboratory. The small dimensions of the vision system and its low cost are major advantages for a wide use in industrial automatic inspection.

  14. Using Vision Metrology System for Quality Control in Automotive Industries

    Science.gov (United States)

    Mostofi, N.; Samadzadegan, F.; Roohy, Sh.; Nozari, M.

    2012-07-01

    The need of more accurate measurements in different stages of industrial applications, such as designing, producing, installation, and etc., is the main reason of encouraging the industry deputy in using of industrial Photogrammetry (Vision Metrology System). With respect to the main advantages of Photogrammetric methods, such as greater economy, high level of automation, capability of noncontact measurement, more flexibility and high accuracy, a good competition occurred between this method and other industrial traditional methods. With respect to the industries that make objects using a main reference model without having any mathematical model of it, main problem of producers is the evaluation of the production line. This problem will be so complicated when both reference and product object just as a physical object is available and comparison of them will be possible with direct measurement. In such case, producers make fixtures fitting reference with limited accuracy. In practical reports sometimes available precision is not better than millimetres. We used a non-metric high resolution digital camera for this investigation and the case study that studied in this paper is a chassis of automobile. In this research, a stable photogrammetric network designed for measuring the industrial object (Both Reference and Product) and then by using the Bundle Adjustment and Self-Calibration methods, differences between the Reference and Product object achieved. These differences will be useful for the producer to improve the production work flow and bringing more accurate products. Results of this research, demonstrate the high potential of proposed method in industrial fields. Presented results prove high efficiency and reliability of this method using RMSE criteria. Achieved RMSE for this case study is smaller than 200 microns that shows the fact of high capability of implemented approach.

  15. USING VISION METROLOGY SYSTEM FOR QUALITY CONTROL IN AUTOMOTIVE INDUSTRIES

    Directory of Open Access Journals (Sweden)

    N. Mostofi

    2012-07-01

    Full Text Available The need of more accurate measurements in different stages of industrial applications, such as designing, producing, installation, and etc., is the main reason of encouraging the industry deputy in using of industrial Photogrammetry (Vision Metrology System. With respect to the main advantages of Photogrammetric methods, such as greater economy, high level of automation, capability of noncontact measurement, more flexibility and high accuracy, a good competition occurred between this method and other industrial traditional methods. With respect to the industries that make objects using a main reference model without having any mathematical model of it, main problem of producers is the evaluation of the production line. This problem will be so complicated when both reference and product object just as a physical object is available and comparison of them will be possible with direct measurement. In such case, producers make fixtures fitting reference with limited accuracy. In practical reports sometimes available precision is not better than millimetres. We used a non-metric high resolution digital camera for this investigation and the case study that studied in this paper is a chassis of automobile. In this research, a stable photogrammetric network designed for measuring the industrial object (Both Reference and Product and then by using the Bundle Adjustment and Self-Calibration methods, differences between the Reference and Product object achieved. These differences will be useful for the producer to improve the production work flow and bringing more accurate products. Results of this research, demonstrate the high potential of proposed method in industrial fields. Presented results prove high efficiency and reliability of this method using RMSE criteria. Achieved RMSE for this case study is smaller than 200 microns that shows the fact of high capability of implemented approach.

  16. Creating a Chinese-style coal-industry economic system

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Y

    1985-04-25

    Efforts to keep China's coal industry financially healthy and to continue increasing production also created problems in terms of output, transport, environmental damage, accidents, and labor pressures. In addition to the historical and economic reasons for these pressures, inadequate leadership and policy errors made things worse. An analysis suggests three problems: (1) an inequitable division of duties between government and business, (2) a neglected marketplace, and (3) the dominance of egalitarianism. The report relates these problems to the production of coal and a package of reforms which restructured the economic system of the industry to give it more autonomy and economic responsibility. The reforms emphasize rational pricing and use of coal as well as management of the industry.

  17. The influence of industrial applications on a control system toolbox

    International Nuclear Information System (INIS)

    Clout, P.

    1992-01-01

    Vsystem is as an open, advanced software application toolbox for rapidly creating fast, efficient and cost-effective control and data-acquisition systems. Vsystem's modular architecture is designed for single computers, networked computers and workstations running under VAX/VMS or VAX/ELN. At the heart of Vsystem lies Vaccess, a user extendible real-time database and library of access routines. The application database provides the link to the hardware of the application and can be organized as one database or separate database installed in different computers on the network. Vsystem has found application in charged-particle accelerator control, tokamak control, and industrial research, as well as its more recent industrial applications. This paper describes the broad feature of Vsystem and the influence that recent industrial applications have had on the software. (author)

  18. Findings of the inspection grading system on industrial radiography

    International Nuclear Information System (INIS)

    Gloria Doloressa

    2011-01-01

    The use of industrial radiography techniques evolve rapidly and widely. Various jobs in industry require the examination of welding techniques / connecting pipes and metal construction. The use of industrial radiography is one type of utilization of nuclear energy must get control so that its use does not cause harmful impacts to worker safety, community, and environment. Regulations is done through inspections, in order to supervise the observance of the terms in the licensing and legislation in the field of nuclear safety. The main purpose of inspection is to ensure the utilization of radiation sources of radiation have been used with. Findings of the inspection is a decline in the performance of licensees in meeting safety requirements. The Grading System to the findings of the inspection needs to be done to improve the effectiveness and efficiency of inspection, and it is expected that the company can improve the management of radiation safety. (author)

  19. Building America House Performance Analysis Procedures

    Energy Technology Data Exchange (ETDEWEB)

    Hendron, R.; Farrar-Nagy, S.; Anderson, R.; Judkoff, R.

    2001-10-29

    As the Building America Program has grown to include a large and diverse cross section of the home building industry, accurate and consistent analysis techniques have become more important to help all program partners as they perform design tradeoffs and calculate energy savings for prototype houses built as part of the program. This document illustrates some of the analysis concepts proven effective and reliable for analyzing the transient energy usage of advanced energy systems as well as entire houses. The analysis procedure described here provides a starting point for calculating energy savings of a prototype house relative to two base cases: builder standard practice and regional standard practice. Also provides building simulation analysis to calculate annual energy savings based on side-by-side short-term field testing of a prototype house.

  20. Adoption of innovative energy systems in social housing: Lessons from eight large-scale renovation projects in The Netherlands

    NARCIS (Netherlands)

    Hoppe, Thomas

    2012-01-01

    Thanks to new insights on the impacts that dwellings have throughout their life cycles, there has been increased attention to retrofitting innovative energy systems (IES) in existing housing. This paper uses an explorative case study design to gain more knowledge about the governance aspects of this

  1. Human factors considerations for expert systems in the nuclear industry

    International Nuclear Information System (INIS)

    Nelson, W.R.

    1988-01-01

    This paper discusses the general human factors issues relative to the development and implementation of expert systems for the nuclear industry. It summarizes the relevant research that addresses these issues, and identifies those areas that need the most effort for success. Since much of the prominent work for the application of expert systems has focused on computerized aids for decision making in emergencies, this paper draws from this area for its examples. This area tends to highlight the issues because of the safety-critical nature of the application. The same issues, however, are relevant to other applications of expert systems in the nuclear industry as well, even though the consequences of failure may not be as dramatic

  2. Internet technologies in the mining industry. Towards unattended mining systems

    Energy Technology Data Exchange (ETDEWEB)

    Krzykawski, Michal [FAMUR Group, Katowice (Poland)

    2009-08-27

    Global suppliers of longwall systems focus mainly on maximising the efficiency of the equipment they manufacture. Given the fact that, since 2004, coal demand on world markets has been constantly on the increase, even during an economic downturn, this endeavour seems fully justified. However, it should be remembered that maximum efficiency must be accompanied by maximum safety of all underground operations. This statement is based on the belief that the mining industry, which exploits increasingly deep and dangerous coal beds, faces the necessity to implement comprehensive IT systems for managing all mining processes and, in the near future, to use unmanned mining systems, fully controllable from the mine surface. The computerisation of mines is an indispensable element of the development of the world mining industry, a belief which has been put into practice with e-mine, developed by the FAMUR Group. (orig.)

  3. Safety applications of computer based systems for the process industry

    International Nuclear Information System (INIS)

    Bologna, Sandro; Picciolo, Giovanni; Taylor, Robert

    1997-11-01

    Computer based systems, generally referred to as Programmable Electronic Systems (PESs) are being increasingly used in the process industry, also to perform safety functions. The process industry as they intend in this document includes, but is not limited to, chemicals, oil and gas production, oil refining and power generation. Starting in the early 1970's the wide application possibilities and the related development problems of such systems were recognized. Since then, many guidelines and standards have been developed to direct and regulate the application of computers to perform safety functions (EWICS-TC7, IEC, ISA). Lessons learnt in the last twenty years can be summarised as follows: safety is a cultural issue; safety is a management issue; safety is an engineering issue. In particular, safety systems can only be properly addressed in the overall system context. No single method can be considered sufficient to achieve the safety features required in many safety applications. Good safety engineering approach has to address not only hardware and software problems in isolation but also their interfaces and man-machine interface problems. Finally, the economic and industrial aspects of the safety applications and development of PESs in process plants are evidenced throughout all the Report. Scope of the Report is to contribute to the development of an adequate awareness of these problems and to illustrate technical solutions applied or being developed

  4. Industrial cost assessment for ITER tritium plant system (water distillation, VPCE and ISS)

    International Nuclear Information System (INIS)

    Sood, S.K.; Kalyanam, K.M.; Fong, C.

    1995-01-01

    The objective of this Industrial Cost Assessment Task for ITER Tritium Plant System consists of providing and order of magnitude cost estimate for the following major subsystems, as outlined in the Scope of Task Agreement and Work Program: water distillation (WD) system, vapour phase catalytic exchange (VPCE) system and the isotope separation system (ISS). The methodology adopted in preparing the order of magnitude cost estimate for the above three subsystems of the ITER tritium plant system is based on building the estimate from the ground up, starting with equipment cost estimates, and adding labour activities separately for engineering, fabrication, assembly, testing installation commissioning, etc. The estimate has been developed assuming that the systems are to be engineered, fabricated and constructed in Canada, (to comply with the Codes, Standards, QA and Seismic Classification applicable in Canada) since information on ITER siting is not currently available. The estimate is based on Ontario Hydro in house cost data on similar systems and equipment, such as the heavy water upgrading plants. The cost estimates are not based on quotations from suppliers for specific ITER components, since this would require completion of detailed design and specifications. 4 refs., 9 tabs., 7 figs

  5. Development of an operational digital photogrammetric system for the North Sea oil and gas industry

    Science.gov (United States)

    Turner, John

    1993-02-01

    The Offshore Oil and Gas Industry in the North Sea has many requirements for three- dimensional measurements in air and underwater. A market audit found that use of conventional photogrammetry was being rejected for many applications because the information was not available fast enough. A development project was set up to replace the photographic cameras with a choice of video or high resolution digital electronic cameras, and the analysis system with a personal computer based image processing system. This solution is now in operation. The paper details the in-house development of the high resolution digital electronic camera and the personal computer based measurement hardware and software. It includes a discussion of the technological parameters, including the method for pixel for pixel correlation within the digital system, camera calibration techniques, the system algorithms, sub-pixel measurement and dimensional accuracy. It introduces the work that was carried out to make the final product acceptable to structural engineers, who now use it to transfer three- dimensional measurements to their CAD systems. It also looks at the work that is being carried out to transform the system into a closed loop control system for underwater robotic manipulators, which includes binary conversion, convolution filtering and tracking functions.

  6. Intelligent robotics and remote systems for the nuclear industry

    International Nuclear Information System (INIS)

    Wehe, D.K.; Lee, J.C.; Martin, W.R.; Tulenko, J.

    1989-01-01

    The nuclear industry has a recognized need for intelligent, multitask robots to carry out tasks in harsh environments. From 1986 to the present, the number of robotic systems available or under development for use in the nuclear industry has more than doubled. Presently, artificial intelligence (AI) plays a relatively small role in existing robots used in the nuclear industry. Indeed, the lack of intelligence has been labeled the ''Achilles heel'' of all current robotic technology. However, larger-scale efforts are underway to make the multitask robot more sensitive to its environment, more capable to move and perform useful work, and more fully autonomous via the use of AI. In this paper, we review the terminology, the history, and the factors which are motivating the development of robotics and remove systems; discuss the applications related to the nuclear industry; and, finally, examine the state of the art of the technologies being applied to introduce more autonomous capabilities. Much of this latter work can be classified as within the artificial intelligence framework. (orig.)

  7. The Coalition for Sustainable Egg Supply: A unique public-private partnership for conducting research on the sustainability of animal housing systems using a multistakeholder approach.

    Science.gov (United States)

    Mench, J A; Swanson, J C; Arnot, C

    2016-03-01

    The growing emphasis on ensuring the sustainability of animal agriculture is providing an impetus for the adoption of new approaches to structuring and conducting research. Sustainability is a complex topic involving many considerations related to the economic, social, and environmental impacts of production systems. Successfully addressing this topic requires multidisciplinary research as well as a high degree of communication with food system stakeholders to ensure that the research results contribute to informed decision making. In this paper, we provide an overview of a public-private partnership, the Coalition for Sustainable Egg Supply (CSES), which was formed to support research evaluating the sustainability of laying hen housing systems. Because of increasing public concerns about the behavioral restriction imposed on laying hens housed in conventional cages, the U.S. egg industry is faced with a need to transition to alternative systems. However, before the CSES project, there was limited information available about how this transition might affect trade-offs related to the sustainability of egg production. The goal of the CSES project was to provide this information by conducting holistic research on a commercial farm that had 3 different hen housing systems. The CSES members represented a variety of stakeholders, including food retailers and distributors, egg producers, universities, and governmental (USDA ARS) and nongovernmental organizations. The CSES was facilitated by a not-for-profit intermediary, the Center for Food Integrity, which was also responsible for communicating the research results to food system stakeholders, including via quantitative and qualitative consumer research. In this paper, we describe the structural aspects of the CSES that were responsible for the successful completion and dissemination of the research as well as the insights that were gained regarding multidisciplinary and multi-institutional collaboration, conducting

  8. Applications of radio frequency identification systems in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Hind, D J [Davis Derby Ltd., Derby (United Kingdom)

    1994-01-01

    Radio Frequency Identification Systems (RFID) are one of the automatic data capture technologies taking over from bar codes and magnetic swipe cards in many applications involving automatic hands free operation in arduous environments. RFID systems are based on the use of miniature radio transponders carrying encoded electronic data that is used to uniquely identify the identity of transponders. The paper reviews the types of system available and compares the various techniques involved in the different systems. The various types of transponder are described including the latest state of the art passive read/write high performance types. The problems involved in designing and certifying a system for use in hazardous areas are described, with particular reference to the problems of inadvertent detonator ignition by radio systems. Applications of RFID systems in the mining industry are described, covering applications both on the surface and underground. 1 ref., 10 figs.

  9. Layered Thermal Insulation Systems for Industrial and Commercial Applications

    Science.gov (United States)

    Fesmire, James E.

    2015-01-01

    From the high performance arena of cryogenic equipment, several different layered thermal insulation systems have been developed for industrial and commercial applications. In addition to the proven areas in cold-work applications for piping and tanks, the new Layered Composite Insulation for Extreme Environments (LCX) has potential for broader industrial use as well as for commercial applications. The LCX technology provides a unique combination of thermal, mechanical, and weathering performance capability that is both cost-effective and enabling. Industry applications may include, for example, liquid nitrogen (LN2) systems for food processing, liquefied natural gas (LNG) systems for transportation or power, and chilled water cooling facilities. Example commercial applications may include commercial residential building construction, hot water piping, HVAC systems, refrigerated trucks, cold chain shipping containers, and a various consumer products. The LCX system is highly tailorable to the end-use application and can be pre-fabricated or field assembled as needed. Product forms of LCX include rigid sheets, semi-flexible sheets, cylindrical clam-shells, removable covers, or flexible strips for wrapping. With increasing system control and reliability requirements as well as demands for higher energy efficiencies, thermal insulation in harsh environments is a growing challenge. The LCX technology grew out of solving problems in the insulation of mechanically complex cryogenic systems that must operate in outdoor, humid conditions. Insulation for cold work includes equipment for everything from liquid helium to chilled water. And in the middle are systems for LNG, LN2, liquid oxygen (LO2), liquid hydrogen (LH2) that must operate in the ambient environment. Different LCX systems have been demonstrated for sub-ambient conditions but are capable of moderately high temperature applications as well.

  10. Carboy Security Testing and Training Programs for Industrial Control Systems

    Energy Technology Data Exchange (ETDEWEB)

    Noyes, Daniel [Idaho National Laboratory, Idaho (United States)

    2012-03-15

    Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall security posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These training vary from web-based cyber security training for control systems engineers to more advanced hands-on training that culminates with a Red Team/Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.

  11. A long-term analysis of Pt counter electrodes for Dye-sensitized Solar Cells exploiting a microfluidic housing system

    Energy Technology Data Exchange (ETDEWEB)

    Sacco, Adriano, E-mail: adriano.sacco@iit.it [Center for Space Human Robotics @Polito, Istituto Italiano di Tecnologia, Corso Trento 21, 10129 Torino (Italy); Pugliese, Diego; Lamberti, Andrea [Applied Science and Technology Department, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino (Italy); Castellino, Micaela; Chiodoni, Angelica [Center for Space Human Robotics @Polito, Istituto Italiano di Tecnologia, Corso Trento 21, 10129 Torino (Italy); Virga, Alessandro [Applied Science and Technology Department, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino (Italy); Bianco, Stefano [Center for Space Human Robotics @Polito, Istituto Italiano di Tecnologia, Corso Trento 21, 10129 Torino (Italy); Applied Science and Technology Department, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino (Italy)

    2015-07-01

    The study of the degradation process occurring in Dye-sensitized Solar Cells (DSCs) is still a hot topic, in view of the final industrialization and application of this class of devices. Currently the long-term analysis of DSCs is carried out on the entire devices, while the monitoring of cell components cannot be performed in situ directly on the materials, but only through indirect methods. In this paper we report on the analysis of two different kinds of Pt counter electrodes through direct measurements performed under real operating conditions, thanks to the use of a home-made microfluidic housing system, which allows the opening and the investigation of the cell components. The counter electrode samples were studied through X-Ray Photoelectron Spectroscopy, Field Emission Scanning Electron Microscopy, Energy Dispersive X-ray Spectroscopy, UV–visible Spectroscopy and Electrochemical Impedance Spectroscopy for a period longer than 1 year. The results showed that the performances of both classes of Pt counter electrodes remained stable for all the investigation period, despite some slight variation of the morphology. DSCs fabricated employing aged counter electrodes exhibited the same photovoltaic performance behavior of reference cells using fresh-produced counter electrodes, thus demonstrating that both class of materials do not undergo degradation during normal operating conditions. - Highlights: • The analysis of Pt counter electrodes for Dye-sensitized Solar Cells was carried out. • Two families of counter electrodes were studied for a period longer than 1 year. • The analyzed samples were investigated in real operating condition. • A small detachment of the Pt clusters in the thermal samples was observed. • The charge transfer properties remained unchanged for all the investigation period.

  12. Industrialization

    African Journals Online (AJOL)

    Lucy

    . African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

  13. Industrialization

    African Journals Online (AJOL)

    Lucy

    scholar, Walt W. Rostow presented and supported this line of thought in his analysis of ... A Brief Historical Background of Industrialization in Africa ... indicative) The western model allowed for the political economy to be shaped by market.

  14. Applications of radio frequency identification systems in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Hind, D J [Davis Derby Ltd., Derby (United Kingdom)

    1995-07-01

    Radio Frequency Identification Systems (RFID) are one of the automatic data capture technologies taking over from bar codes and magnetic swipe cards in many applications involving automatic hands free operation in arduous environments. RFID systems are based on the use of miniature radio transponders carrying encoded electronic data that is used to uniquely identify the identity of transponders. This paper reviews the types of system available and compares the various techniques involved in the different systems. The various types of transponder are described including the latest state of the art passive read/write high performance types. A review of the history of RFID systems in the mining industry is also given in the paper. The problems involved in designing and certifying a system for use in hazardous areas are also described, with particular reference to the problems of inadvertent detonator ignition by radio systems. Applications of RFID systems in the mining industry are described in considerable detail, covering applications both on the surface and underground. 1 ref., 12 figs., 1 tab.

  15. Effect of weaning stress, housing system and probiotics supplementation on cortisol, thyroid activity and productive performance of sucker camel calves

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Fattah, M. S.; Hashem, A. L.S.; Azamel, A. A. [Department of Animal Physiology, Animal and Poultry Production Division, Desert Research Center, Cairo (Egypt); Farghaly, H. A.M., [Biological Applications Department, Radioisotopes Applications Division, Nuclear Research Centre, Atomic Energy Authority, P.O. 13759, Inshas (Egypt)

    2011-07-01

    The weaning process has been identified as associated with potential psychological, nutritional and physiological stressors on both dam and her young. These stressors are often stressful for the young. Ten sucker camel calves were weaned using calf-dam on and suckling off weaning system (calves were kept with their dams at all times during weaning process and prevented from suckling) under two housing systems, 6 calves in group housing system (G) and 4 calves in individually housing system (I). Half of calves in each housing system were supplemented with probiotics (treated, P), while the other was not-supplemented with probiotics (control, C). This study was carried out at Maryout Research Station of the Desert Research Center, 35 km to southwest of Alexandria, Egypt. Calves were weaned at 280 days of age with initial live body weight (LBW) of 236.76{+-}0.224 kg. The duration of the study was 35 days and divided into five weeks; one week served as pre-weaning followed by four weeks served as post-weaning period (calves were in treatments). Calves and their dams were used to estimate the effects of weaning stress, housing systems (group, G vs. individually, I) and probiotics supplementation on the productive performance, cortisol (COR) and thyroid hormones (T{sub 3} and T{sub 4}) concentrations of camel calves (Camelus dromedaries). No measurements were done on the dams. The results indicated that, regardless the effect of housing system and Abdel-Fattah et al., J. Rad. Res. Appl. Sci., Vol. 4, No. 4(B) (2011) 1292 probiotics supplementation, weaning stress declined LBW -0.89% at d{sub 7} post weaning. Concerned housing system effect, group-housed calves and individually-housed calves lost -0.36 and -1.43% of their body weights, respectively on d{sub 7} post-weaning and they recovered their weaning weight (d{sub 0}) on d{sub 14} post-weaning period (2.45 and 0.57%). Neither group housing system nor probiotics supplementation prevented the weight lost resulted by

  16. Design and performance of a novel innovative roofing system for tropical landed houses

    International Nuclear Information System (INIS)

    Al-Obaidi, Karam M.; Ismail, Mazran; Abdul Rahman, Abdul Malek

    2014-01-01

    Highlights: • Constructing a new design of sustainable roofing systems. • An innovative roofing system (IRS) for tropical landed houses is proposed. • Separate solar heat from useful natural light by physical form. • The IRS can maintain an illuminance level of approximately 86–100% below 2000 lux. • The IRS can reduce the attic air temperature by 5.4 °C and the indoor air temperature by 2.1 °C. - Abstract: An innovative roofing system (IRS) is designed to deliver an abundant and uniform amount of cool natural light from the roof with reduced heat gain effect for tropical residential buildings (3 m height) in Malaysia. Studies revealed that several passive and active solar techniques can be integrated to form a roofing system to separate solar heat from useful natural light at the attic zone before heat reaches the occupied space. The IRS design is specified and proposed by using glazing technology (polycarbonate), pigment technique (reflective and radiative), as well as ventilation process (hybrid turbine ventilator) applied at the attic zone to represent a new model of sustainable roofing design. The aim of this research is to demonstrate the effectiveness of the design concept without the need for any chemical, complex, or expensive solar design techniques. The methodology was conducted on a series of field studies in a standard room model at Universiti Sains Malaysia. Three different roofing systems are investigated to identify the IRS performance in both dark and daylight conditions to determine the effect of natural light on the indoor environment. The outcomes of the design show that the IRS was able to reduce the indoor air temperature compared with conventional roofing system by approximately 2.1 °C under daylight condition. Results showed that the difference in the IRS (daylight–dark) condition was 0.31 °C compared to that in the conventional roofing system at 0.8 °C. Furthermore, the level of mean radiant temperature compared with

  17. The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-08-15

    for radiation protection and safety provided by the IAEA to its Member States. This publication was developed under the IAEA’s statutory responsibility to provide for the worldwide application of safety standards for the protection of people against exposure to ionizing radiation. It details the results of the Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR) project during 2009–2012 and, in particular, the activities of the Working Group on Industrial Radiography (WGIR). The ISEMIR project arose from the Occupational Radiation Protection International Action Plan (approved by the IAEA Board of Governors in September 2003), which identified in Action 7 the need to establish networks for the exchange of information on experience and lessons learned between interested parties.

  18. The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

    International Nuclear Information System (INIS)

    2014-08-01

    for radiation protection and safety provided by the IAEA to its Member States. This publication was developed under the IAEA’s statutory responsibility to provide for the worldwide application of safety standards for the protection of people against exposure to ionizing radiation. It details the results of the Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR) project during 2009–2012 and, in particular, the activities of the Working Group on Industrial Radiography (WGIR). The ISEMIR project arose from the Occupational Radiation Protection International Action Plan (approved by the IAEA Board of Governors in September 2003), which identified in Action 7 the need to establish networks for the exchange of information on experience and lessons learned between interested parties

  19. Social Housing Provision in Copenhagen

    DEFF Research Database (Denmark)

    Tsenkova, Sasha; Vestergaard, Hedvig

    -profit housing providers, and a wide range of fiscal and regulatory instruments enhancing the competitive performance of the social housing sector. The research analyses recent housing policy measures and their impact on new social housing provision in Copenhagen. The emphasis is on the mix of housing policy......The paper provides an overview of trends and processes of change affecting new social housing provision in Denmark with a focus on Copenhagen. The local responses are reviewed within the context of changes to the unitary national housing system that functions with a robust range of private and non...... instruments implemented in three major policy domains-fiscal, financial and regulatory-to promote the production of new social housing. The system of new social housing provision is examined as a dynamic process of interaction between public and private institutions defining housing policy outcomes...

  20. DIANE stationary neutron radiography system image quality and industrial applications

    International Nuclear Information System (INIS)

    Cluzeau, S.; Huet, J.; Tourneur, P. le

    1994-01-01

    The SODERN neutron radiography laboratory has operated since February 1993 using a sealed tube generator (GENIE 46). An experimental programme of characterization (dosimetry, spectroscopy) has confirmed the expected performances concerning: neutron flux intensity, neutron energy range, residual gamma flux. Results are given in a specific report [2]. This paper is devoted to the image performance reporting. ASTM and specific indicators have been used to test the image quality with various converters and films. The corresponding modulation transfer functions are to be determined from image processing. Some industrial applications have demonstrated the capabilities of the system: corrosion detection in aircraft parts, ammunitions filling testing, detection of polymer lacks in sandwich steel sheets, detection of moisture in a probe for geophysics, residual ceramic cores imaging in turbine blades. Various computerized electronic imaging systems will be tested to improve the industrial capabilities. (orig.)

  1. Integrated, regional approach to risk management of industrial systems

    International Nuclear Information System (INIS)

    Chakraborty, S.

    1992-01-01

    This paper focuses on the following four main issues: (1) necessity for an integrated, regional approach to risk management of industrial systems; (2) principles of risk management; (3) integrated approach and overall methodology; and (4) implementation of risk management strategies on a regional basis. The U.N. Interagency project on risk management for large industrial areas, which is a pioneer type of international initiative for an integrated approach to risk management, is discussed in this context. Another encouraging activity for further development of overall methodologies for risk management is the ongoing project on the risk and safety of technical systems at the Swiss Federal Institute of Technology in Aurich. The concept of integral risk management takes into account multidimensional factors including technical, economic, political, social, and ethical considerations to allow a well-balanced decision-making process

  2. Prospective comparison of PI-RADS version 2 and qualitative in-house categorization system in detection of prostate cancer.

    Science.gov (United States)

    Gaur, Sonia; Harmon, Stephanie; Mehralivand, Sherif; Bednarova, Sandra; Calio, Brian P; Sugano, Dordaneh; Sidana, Abhinav; Merino, Maria J; Pinto, Peter A; Wood, Bradford J; Shih, Joanna H; Choyke, Peter L; Turkbey, Baris

    2018-03-31

    Prostate Imaging-Reporting and Data System v. 2 (PI-RADSv2) provides standardized nomenclature for interpretation of prostate multiparametric MRI (mpMRI). Inclusion of additional features for categorization may provide benefit to stratification of disease. To prospectively compare PI-RADSv2 to a qualitative in-house system for detecting prostate cancer on mpMRI. Prospective. In all, 338 patients who underwent mpMRI May 2015-May 2016, with subsequent MRI/transrectal ultrasound fusion-guided biopsy. 3T mpMRI (T 2 W, diffusion-weighted [DW], apparent diffusion coefficient [ADC] map, b-2000 DWI acquisition, and dynamic contrast-enhanced [DCE] MRI). One genitourinary radiologist prospectively read mpMRIs using both in-house and PI-RADSv2 5-category systems. In lesion-based analysis, overall and clinically significant (CS) tumor detection rates (TDR) were calculated for all PI-RADSv2 and in-house categories. The ability of each scoring system to detect cancer was assessed by area under receiver operator characteristic curve (AUC). Within each PI-RADSv2 category, lesions were further stratified by their in-house categories to determine if TDRs can be increased by combining features of both systems. In 338 patients (median prostate-specific antigen [PSA] 6.5 [0.6-113.6] ng/mL; age 64 [44-84] years), 733 lesions were identified (47% tumor-positive). Predictive abilities of both systems were comparable for all (AUC 76-78%) and CS cancers (AUCs 79%). The in-house system had higher overall and CS TDRs than PI-RADSv2 for categories 3 and 4 (P house 65%, PI-RADSv2 22.1%). For lesions categorized as PI-RADSv2 = 4, characterization of suspicious/indeterminate extraprostatic extension (EPE) and equivocal findings across all mpMRI sequences contributed to significantly different TDRs for both systems (TDR range 19-75%, P < 0.05). PI-RADSv2 behaves similarly to an existing validated system that relies on the number of sequences on which a lesion is seen. This prospective

  3. Mathematical modelling of thermal storage systems for the food industry

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, A.; Lacarra, G. [Universidad Publica de Navarra Campus Arrosadia, Pamplona (Spain). Area de Tecnologia de Alimentos

    1999-07-01

    Dynamic mathematical models of two thermal storage systems used in the food industry to produce chilled water are presented; an ice-bank system and a holding tank system. The variability of the refrigeration demand with time was taken into account in the model. A zoned approach using mass and energy balances was applied. Heat transfer phenomena in the evaporator were modelled using empirical correlations. The experimental validation of the mathematical models on an ice-bank system at pilot plant scale, and a centralized refrigeration system with a holding tank in a winery, showed accurate prediction. Simple models are adequate to predict the dynamic behaviour of these refrigeration systems under variable heat loads. (Author)

  4. Thermophotovoltaic systems for civilian and industrial applications in Japan

    International Nuclear Information System (INIS)

    Yugami, Hiroo; Sasa, Hiromi; Yamaguchi, Masafumi

    2003-01-01

    The potential market for thermophotovoltaic (TPV) applications has been studied for civilian and industrial sectors in Japan. Comparing the performance of gas engines or turbines, as well as the underdeveloped power generation technologies such as fuel cells or chemical batteries, we have discussed the feasible application field of TPV systems to compete with those power generators. From the point of view of applicability for TPV systems in Japan, portable generators, co-generation systems and solar power plants are selected for our system analysis. The cost and performance targets of TPV systems for co-generation are also discussed by assuming a typical daily profile of electricity and hot water demands in Japanese homes. A progress report on the recent TPV research activities is given as well as a feasibility study concerning such TPV systems in Japan. (Author)

  5. Egg production and welfare of laying hens kept in different housing systems (conventional, enriched cage, and free range).

    Science.gov (United States)

    Yilmaz Dikmen, B; İpek, A; Şahan, Ü; Petek, M; Sözcü, A

    2016-07-01

    The aim of this study was to compare egg production performance and welfare traits of laying hens kept in conventional cage (CC), enriched cage (EC), and free range (FR). Lohmann Brown laying hens (n = 480 with 160 per housing type) were studied across a production cycle from placement at 17 wk until depopulation at 66 wk. The hens were randomly allocated into cages or pens of housing system groups; within each system there were four replicates with 40 hens in each pen or cage. The hen day egg production (P = 0.037), feed intake (FI) (P 0.05). The hens in the FR system had additional space for optimum comfort and better feather and bone traits, but the dirty egg ratio, feed consumption, and foot lesions were higher than in CC and EC systems. © 2016 Poultry Science Association Inc.

  6. Expert-systems and computer-based industrial systems

    International Nuclear Information System (INIS)

    Terrien, J.F.

    1987-01-01

    Framatome makes wide use of expert systems, computer-assisted engineering, production management and personnel training. It has set up separate business units and subsidiaries and also participates in other companies which have the relevant expertise. Five examples of the products and services available in these are discussed. These are in the field of applied artificial intelligence and expert-systems, in integrated computer-aid design and engineering, structural analysis, computer-related products and services and document management systems. The structure of the companies involved and the work they are doing is discussed. (UK)

  7. IMPLEMENTATION OF PROPERTY MANAGEMENT SYSTEM IN HOTEL INDUSTRY

    OpenAIRE

    Krželj-Čolović, Zorica; Cerović, Zdenko

    2013-01-01

    Information and Communication Technologies (ICT) influences the development tourism on globally, and its development has changed the practice of business. Any reference ICT in the hotel industry necessarily begins the concept of Property Management System (PMS). PMS as an essential component for hotel management provides tools as are necessary hotel staff in performing daily operations of the reservation, the accommodation capacities management, accounting, etc. This software supports all bas...

  8. Hybrid power filter for advanced power quality in industrial systems

    Czech Academy of Sciences Publication Activity Database

    Švec, J.; Müller, Z.; Kasembe, A. G.; Tlustý, J.; Valouch, Viktor

    2013-01-01

    Roč. 103, october 2013 (2013), s. 157-167 ISSN 0378-7796 R&D Projects: GA AV ČR IAA200760703 Institutional research plan: CEZ:AV0Z20570509 Institutional support: RVO:61388998 Keywords : hybrid power filter * power quality * industrial system Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 1.595, year: 2013 http://www.sciencedirect.com/science/article/pii/S0378779613001417

  9. Adaptation of Regulatory Systems in Schoolchildren, Residing in Industrial Area

    Directory of Open Access Journals (Sweden)

    Aiman E. Konkabaeva

    2013-01-01

    Full Text Available The article presents the results of the study of heart rate variability (HRT in apparently healthy volunteers of both sexes without bad habits, aged 16-18, residing in industrial region (Temirtau and the ones, studying under innovative technologies. HRT was registered with the help of computer-controlled devices “Varikard” (Russia. The changes of HRT spectral indexes towards integral impact of vegetative regulation mechanisms and parasympathetic activity decrease and regulatory systems overexertion, demanding correction methods implementation

  10. Performance of an in-house human immunodeficiency virus type 1 genotyping system for assessment of drug resistance in Cuba.

    Directory of Open Access Journals (Sweden)

    Yoan Alemán

    Full Text Available As commercial human immunodeficiency virus type 1 drug resistance assays are expensive, they are not commonly used in resource-limited settings. Hence, a more affordable in-house procedure was set up taking into account the specific epidemiological and economic circumstances of Cuba. The performance characteristics of the in-house assay were evaluated using clinical samples with various subtypes and resistance patterns. The lower limit of amplification was determined on dilutions series of 20 clinical isolates and ranged from 84 to 529 RNA copies/mL. For the assessment of trueness, 14 clinical samples were analyzed and the ViroSeq HIV-1 Genotyping System v2.0 was used as the reference standard. The mean nucleotide sequence identity between the two assays was 98.7% ± 1.0. Additionally, 99.0% of the amino acids at drug resistance positions were identical. The sensitivity and specificity in detecting drug resistance mutations was respectively 94.1% and 99.5%. Only few discordances in drug resistance interpretation patterns were observed. The repeatability and reproducibility were evaluated using 10 clinical samples with 3 replicates per sample. The in-house test was very precise as nucleotide sequence identity among paired nucleotide sequences ranged from 98.7% to 99.9%. The acceptance criteria were met by the in-house test for all performance characteristics, demonstrating a high degree of accuracy. Subsequently, the applicability in routine clinical practice was evaluated on 380 plasma samples. The amplification success rate was 91% and good quality consensus sequences encoding the entire protease and the first 335 codons in reverse transcriptase could be obtained for 99% of the successful amplicons. The reagent cost per sample using the in-house procedure was around € 80 per genotyping attempt. Overall, the in-house assay provided good results, was feasible with equipment and reagents available in Cuba and was half as expensive as commercial

  11. Performance of an in-house human immunodeficiency virus type 1 genotyping system for assessment of drug resistance in Cuba.

    Science.gov (United States)

    Alemán, Yoan; Vinken, Lore; Kourí, Vivian; Pérez, Lissette; Álvarez, Alina; Abrahantes, Yeissel; Fonseca, Carlos; Pérez, Jorge; Correa, Consuelo; Soto, Yudira; Schrooten, Yoeri; Vandamme, Anne-Mieke; Van Laethem, Kristel

    2015-01-01

    As commercial human immunodeficiency virus type 1 drug resistance assays are expensive, they are not commonly used in resource-limited settings. Hence, a more affordable in-house procedure was set up taking into account the specific epidemiological and economic circumstances of Cuba. The performance characteristics of the in-house assay were evaluated using clinical samples with various subtypes and resistance patterns. The lower limit of amplification was determined on dilutions series of 20 clinical isolates and ranged from 84 to 529 RNA copies/mL. For the assessment of trueness, 14 clinical samples were analyzed and the ViroSeq HIV-1 Genotyping System v2.0 was used as the reference standard. The mean nucleotide sequence identity between the two assays was 98.7% ± 1.0. Additionally, 99.0% of the amino acids at drug resistance positions were identical. The sensitivity and specificity in detecting drug resistance mutations was respectively 94.1% and 99.5%. Only few discordances in drug resistance interpretation patterns were observed. The repeatability and reproducibility were evaluated using 10 clinical samples with 3 replicates per sample. The in-house test was very precise as nucleotide sequence identity among paired nucleotide sequences ranged from 98.7% to 99.9%. The acceptance criteria were met by the in-house test for all performance characteristics, demonstrating a high degree of accuracy. Subsequently, the applicability in routine clinical practice was evaluated on 380 plasma samples. The amplification success rate was 91% and good quality consensus sequences encoding the entire protease and the first 335 codons in reverse transcriptase could be obtained for 99% of the successful amplicons. The reagent cost per sample using the in-house procedure was around € 80 per genotyping attempt. Overall, the in-house assay provided good results, was feasible with equipment and reagents available in Cuba and was half as expensive as commercial assays.

  12. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  13. Computer-aided safety systems of industrial high energy objects

    International Nuclear Information System (INIS)

    Topolsky, N.G.; Gordeev, S.G.

    1995-01-01

    Modern objects of fuel and energy, chemical industries are characterized by high power consumption; by presence of large quantities of combustible and explosive substances used in technological processes; by advanced communications of submission systems of initial liquid and gasiform reagents, lubricants and coolants, the products of processing, and wastes of production; by advanced ventilation and pneumatic transport; and by complex control systems of energy, material and information flows. Such objects have advanced infrastructures, including a significant quantity of engineering buildings intended for storage, transportation, and processing of combustible liquids, gasiform fuels and materials, and firm materials. Examples of similar objects are nuclear and thermal power stations, chemical plants, machine-building factories, iron and steel industry enterprises, etc. Many tasks and functions characterizing the problem of fire safety of these objects can be accomplished only upon the development of special Computer-Aided Fire Safety Systems (CAFSS). The CAFSS for these objects are intended to reduce the hazard of disastrous accidents both causing fires and caused by them. The tasks of fire prevention and rescue work of large-scale industrial objects are analyzed within the bounds of the recommended conception. A functional structure of CAFSS with a list of the main subsystems forming a part of its composition has been proposed

  14. Model for determining and optimizing delivery performance in industrial systems

    Directory of Open Access Journals (Sweden)

    Fechete Flavia

    2017-01-01

    Full Text Available Performance means achieving organizational objectives regardless of their nature and variety, and even overcoming them. Improving performance is one of the major goals of any company. Achieving the global performance means not only obtaining the economic performance, it is a must to take into account other functions like: function of quality, delivery, costs and even the employees satisfaction. This paper aims to improve the delivery performance of an industrial system due to their very low results. The delivery performance took into account all categories of performance indicators, such as on time delivery, backlog efficiency or transport efficiency. The research was focused on optimizing the delivery performance of the industrial system, using linear programming. Modeling the delivery function using linear programming led to obtaining precise quantities to be produced and delivered each month by the industrial system in order to minimize their transport cost, satisfying their customers orders and to control their stock. The optimization led to a substantial improvement in all four performance indicators that concern deliveries.

  15. Model oriented application generation for industrial control systems

    International Nuclear Information System (INIS)

    Copy, B.; Barillere, R.; Blanco, E.; Fernandez Adiego, B.; Nogueira Fernandes, R.; Prieto Barreiro, I.

    2012-01-01

    The CERN Unified Industrial Control Systems framework (UNICOS) is a software generation methodology and a collection of development tools that standardizes the design of industrial control applications. A Software Factory, named the UNICOS Application Builder (UAB), was introduced to ease extensibility and maintenance of the framework, introducing a stable meta-model, a set of platform-independent models and platform-specific configurations against which code generation plug-ins and configuration generation plug-ins can be written. Such plug-ins currently target PLC programming environments (Schneider and SIEMENS PLCs) as well as SIEMENS WinCC Open Architecture SCADA (previously known as ETM PVSS) but are being expanded to cover more and more aspects of process control systems. We present what constitutes the UNICOS meta-model and the models in use, how these models can be used to capture knowledge about industrial control systems and how this knowledge can be used to generate both code and configuration for a variety of target usages. (authors)

  16. Security of the data transmission in the industrial control system

    Directory of Open Access Journals (Sweden)

    Marcin Bednarek

    2015-12-01

    Full Text Available The theme of this paper is to present the data transmission security system between the stations of the industrial control system. The possible options for secure communications between process stations, as well as between process and operator station are described. Transmission security mechanism is based on algorithms for symmetric and asymmetric encryption. The authentication process uses a software token algorithm and a one-way hash function. The algorithm for establishing a secured connection between the stations, including the authentication process and encryption of data transmission is given. The process of securing the transmission consists of 4 sub-processes: (I authentication; (II asymmetric, public keys transmission; (III symmetric key transmission; (IV data transmission. The presented process of securing the transmission was realized in the industrial controller and emulator. For this purpose, programming languages in accordance with EN 61131 were used. The functions were implemented as user function blocks. This allows us to include a mixed code in the structure of the block (both: ST and FBD. Available function categories: support of the asymmetric encryption; asymmetric encryption utility functions; support of the symmetric encryption; symmetric encryption utility functions; support of the hash value calculations; utility functions of conversion.[b]Keywords[/b]: transmission security, encryption, authentication, industrial control system

  17. New radionuclide specific laboratory detection system for metallurgical industry

    International Nuclear Information System (INIS)

    Burianova, L.; Solc, J.; Dryak, P.; Moser, H.; Branger, T.; Garcia-Torano, E.; Peyres, V.; Capogni, M.; Luca, A.; Vodenik, B.; Oliveira, C.; Portugal, L.; Tzika, F.; Lutter, G.; Szucs, L.; Dziel, T.; Burda, O.; Dirk, A.; Martinkovic, J.; Sliskonen, T.; Mattila, A.

    2014-01-01

    One of the main outputs of the European Metrology Research Programme (EMRP) project 'Ionising radiation metrology for the metallurgical industry' (MetroMetal) was the recommendation on a novel spectrometric detection system optimized for the measurement of radioactivity in metallurgical samples. The recommended system, prototypes of which were constructed at two project partner's laboratories, was characterized by using Monte Carlo (MC) simulations. Six different MC codes were used to model the system and a range of cylindrical samples of cast steel, slag and fume dust. The samples' shape, density, and elemental composition were the same as the ones of the calibration standards developed within the project to provide traceability to end-users. The MC models were used to calculate full-energy peak and total detection efficiencies as well as true coincidence summing correction (TCSC) factors for selected radionuclides of interest in the metallurgical industry: 60 Co, 137 Cs, 192 Ir, 214 Bi, 214 Pb, and 208 Tl. The MC codes were compared to each other on the basis of the calculated detection efficiencies and TCSC factors. In addition, a 'Procedural guide for calculation of TCSC factors for samples in metallurgical industry' was developed for end-users. The TCSC factors reached in certain cases up to 32% showing that the summing effects are of high importance in the close measurement geometries met in routine analysis of metallurgical samples. (authors)

  18. Evaluating the Management System Approach for Industrial Energy Efficiency Improvements

    Directory of Open Access Journals (Sweden)

    Thomas Zobel

    2016-09-01

    Full Text Available Voluntary environmental management systems (EMS based on the international standard ISO 14001 have become widespread globally in recent years. The purpose of this study is to assess the impact of voluntary management systems on energy efficiency in the Swedish manufacturing industry by means of objective industrial energy data derived from mandatory annual environmental reports. The study focuses on changes in energy efficiency over a period of 12 years and includes both ISO 14001-certified companies and non-certified companies. Consideration is given to energy improvement efforts in the companies before the adoption of ISO 14001. The analysis has been carried out using statistical methods for two different industrial energy parameters: electricity and fossil fuel consumption. The results indicate that ISO 14001 adoption and certification has increased energy efficiency regarding the use of fossil fuel. In contrast, no effect of the management systems has been found concerning the use of electricity. The mixed results of this study are only partly in line with the results of previous studies based on perceptions of company representatives.

  19. Scientific Approaches Of Management Of System Of Industrial Water Use In Ukraine

    OpenAIRE

    Olga Yarotskaya

    2011-01-01

    The main approaches are established for modernization of existing management system of industrial water use in Ukraine, the formation of innovative model of development of the industrial complex and the new state policy of ecologically balanced industrial water use.

  20. A system approach to the environmental analysis of industrial buildings

    Energy Technology Data Exchange (ETDEWEB)

    San-Jose Lombera, Jose-Tomas [LABEIN-Tecnalia, C/Geldo, Parque Tecnologico de Bizkaia, Edificio 700, 48160 Derio (Vizcaya) (Spain); Department of Science of Materials, ESTSI Bilbao-University of Basque Country (UPV/EHU), Alda, Urquijo s/n, 48013 Bilbao (Spain); Garrucho Aprea, Isaac [SEDICAL S.A., Txorierri Etorbidea 46 - Pab, 12 F 48150 Sondica (Vizcaya) (Spain)

    2010-03-15

    The construction sector plays a major role in the development of society. It wields enormous influence over economic activity, employment and growth rates. However, it also has a substantial impact on the natural environment, the effects of which are evident across the world. Over recent decades, pioneering initiatives have proposed environmentally friendly buildings and sustainable construction has centred on residential and office buildings. Nevertheless, further consideration still needs to be given to sustainability in many areas of industrial construction. Accordingly, an Integrated Value Model for Sustainable Assessment (MIVES) is presented in this article that applies a set of six study scopes to define the sustainability criteria of industrial buildings. The system uses a requirements tree to quantify sustainability at various hierarchical levels, in order to assess the behaviour of industrial buildings and compliance with the criteria. Assignment of value functions to the sustainability criteria is then described in the context of a case study of a printing works, which demonstrates the effectiveness of this model at unifying both qualitative and quantitative indicators, in order to arrive at a specific ''environmental sustainability index'' for the industrial building. (author)

  1. Design of a new flotation system for industrial waters treatment

    International Nuclear Information System (INIS)

    Forero, J E; Diaz, J; Blandon V R

    1999-01-01

    The air flotation is a process of physical separation for the industrial wastewater treatment that removes oils and suspended solids. Although methods different from flotation have been used in petroleum industry, their application is subjected to numerous operational and economic limitations. In this work some comparisons of these flotation techniques are discussed and, a new system for the treatment of residual waters by flotation is the developed. This system is the result of several years of research both in laboratory and in pilot plants. The new design uses characteristics from other techniques, it is based on a modification of a system of induced air flotation as to operate like a system of dissolved air flotation, which improves its performance at lower costs and reduces operational problems associated with equipment maintenance. The developed system has several characteristics that improve its operation, including the use of nozzles for gas injection and dispersion in the liquid phase. As opposed to conventional systems, there is no need to use motorized bubble generating equipment for each flotation cell, diminishing therefore power requirements

  2. The Housing Finance Revolution

    OpenAIRE

    Richard K. Green; Susan M. Wachter

    2007-01-01

    While other countries dismantled their segmented housing finance systems and linked housing finance to capital markets through deregulated depositories, the US linked housing finance to capital markets through depository deregulation and securitization. Elsewhere securitization has not developed. The US provided the underpinnings for its mortgage security infrastructure with the creation of FNMA in 1938 and in order to create liquidity in the mortgage market required the standardization of mo...

  3. Adoption of innovative energy systems in social housing: Lessons from eight large-scale renovation projects in The Netherlands

    International Nuclear Information System (INIS)

    Hoppe, Thomas

    2012-01-01

    Thanks to new insights on the impacts that dwellings have throughout their life cycles, there has been increased attention to retrofitting innovative energy systems (IES) in existing housing. This paper uses an explorative case study design to gain more knowledge about the governance aspects of this under-researched topic. The central research question is: Which factors influence the adoption of innovative energy systems in social housing sites during renovation projects? To answer this question, eight large-scale renovation projects in The Netherlands were investigated. These case studies allowed the identification of barriers, enabling factors and perspectives from three main actors—housing associations, tenants and local authorities. It turns out that adopting IES encounters many barriers: lack of trust between project partners, delay in project progress, financial feasibility considerations, lack of support from tenants, lengthy legal permit procedures, over-ambitious project goals, poor experiences in previous projects, and IES ambitions that are not taken serious by key decision-makers. Furthermore, IES were only successfully fitted in three of the eight projects. Moreover, ambitions were lowered as the projects progressed in all the cases investigated. The study calls for further systematic, in-depth comparison of fitting IES in large-scale renovation projects in social housing. - Highlights: ► Attention to adoption of innovative energy systems in social housing. ► Several non-technical factors influence adoption. ► In-depth analysis of eight local-level renovation projects. ► Ambitions are lowered as projects progress. ► Barriers: financial feasibility, over-ambitious goals, delay, lack of trust.

  4. Radiographic examination of keel bone damage in living laying hens of different strains kept in two housing systems.

    Directory of Open Access Journals (Sweden)

    Beryl Katharina Eusemann

    Full Text Available A high prevalence of deviations and fractures of the keel bone is a widespread welfare problem in laying hens. The aim of this study was to experimentally investigate this multifactorial problem throughout the laying period and to compare the prevalence and severity in different layer lines and different housing systems. High performing white (WLA and brown (BLA pure bred layer lines and low performing white (R11, G11 and brown layer lines (L68 were kept in both single cages and a floor housing system. A total of 97 hens (19 or 20 from each line, respectively were repeatedly radiographed in the 35th, 51st and 72nd week of age. Fracture prevalence increased with age (p<0.001. The proportion of deviated keel bone area increased only for caged BLA, WLA and R11 hens (p<0.05 and was significantly higher for caged WLA and R11 hens compared to floor-housed WLA and R11 hens in the 72nd week of age (p<0.05. In the 72nd week of age hens in the floor housing system showed significantly more fractures than hens kept in cages (p<0.05. Prevalence of keel bone deviations was significantly higher in the white layer line R11 but significantly lower in the white layer line G11 compared to both brown layer lines and WLA (p<0.05. Brown layers showed significantly more fractures than white layers (p<0.05 in the 51st and 72nd week of age. Within the brown layers there was a significantly lower prevalence of deviations (p<0.05 and fractures (p<0.05 in the low performing (L68 compared to the high performing line (BLA. Our results show a different development of keel bone damage in caged compared to floor-housed hens under experimental conditions. Additionally, they indicate genetic effects on keel bone damage.

  5. An investigation of the techno-economic impact of internal combustion engine based cogeneration systems on the energy requirements and greenhouse gas emissions of the Canadian housing stock

    International Nuclear Information System (INIS)

    Asaee, S. Rasoul; Ugursal, V. Ismet; Beausoleil-Morrison, Ian

    2015-01-01

    This study provides a techno-economic evaluation of retrofitting internal combustion engine (ICE) based cogeneration systems in the Canadian housing stock (CHS). The study was conducted using the Canadian Hybrid Residential End-Use Energy and GHG Emissions Model (CHREM). CHREM includes close to 17,000 unique house files that are statistically representative of the Canadian housing stock. The cogeneration system performance was evaluated using a high resolution integrated building performance simulation software. It is assumed that the ICE cogeneration system is retrofitted into all houses that currently use a central space heating system and have a suitable basement or crawl space. The GHG emission intensity factor associated with marginal electricity generation in each province is used to estimate the annual GHG emissions reduction due to the cogeneration system retrofit. The results show that cogeneration retrofit yields 13% energy savings in the CHS. While the annual GHG emissions would increase in some provinces due to cogeneration retrofits, the total GHG emissions of the CHS would be reduced by 35%. The economic analysis indicates that ICE cogeneration system retrofits may provide an economically feasible opportunity to approach net/nearly zero energy status for existing Canadian houses. - Highlights: • Techno-economic evaluation ICE cogeneration systems for Canadian housing is reported. • ICE cogeneration retrofit could yield 13% annual energy savings in Canadian housing. • Annual GHG emissions of Canadian housing could decrease by 35% with ICE cogeneration. • But, in some provinces, GHG emissions would increase as a result of ICE cogeneration

  6. Implementation and rejection of industrial steam system energy efficiency measures

    International Nuclear Information System (INIS)

    Therkelsen, Peter; McKane, Aimee

    2013-01-01

    Steam systems consume approximately one third of energy applied at US industrial facilities. To reduce energy consumption, steam system energy assessments have been conducted on a wide range of industry types over the course of 5 years through the Energy Savings Assessment (ESA) program administered by the US Department of Energy (US DOE). ESA energy assessments result in energy efficiency measure recommendations that are given potential energy and energy cost savings and potential implementation cost values. Saving and cost metrics that measure the impact recommended measures will have at facilities, described as percentages of facility baseline energy and energy cost, are developed from ESA data and used in analyses. Developed savings and cost metrics are examined along with implementation and rejection rates of recommended steam system energy efficiency measures. Based on analyses, implementation of steam system energy efficiency measures is driven primarily by cost metrics: payback period and measure implementation cost as a percentage of facility baseline energy cost (implementation cost percentage). Stated reasons for rejecting recommended measures are primarily based upon economic concerns. Additionally, implementation rates of measures are not only functions of savings and cost metrics, but time as well. - Highlights: ► We examine uptake/rejection of industrial steam system energy efficiency measures. ► We examine metrics that correspond to uptake/rejection of recommended measures. ► We examine barriers hindering steam system energy efficiency measure implementation. ► Uptake/rejection of steam measures is linked to potential cost metrics. ► Increased uptake of measures and uptake of more costly measures increases with time

  7. A Nuclear Safety System based on Industrial Computer

    International Nuclear Information System (INIS)

    Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack

    2011-01-01

    The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

  8. A Nuclear Safety System based on Industrial Computer

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack [Korea Electric Power Corporation Engineering and Construction, Daejeon (Korea, Republic of)

    2011-05-15

    The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

  9. Operation safety of complex industrial systems. Main concepts

    International Nuclear Information System (INIS)

    Zwingelstein, G.

    2009-01-01

    Operation safety consists in knowing, evaluating, foreseeing, measuring and mastering the technological system and human failures in order to avoid their impacts on health and people's safety, on productivity, and on the environment, and to preserve the Earth's resources. This article recalls the main concepts of operation safety: 1 - evolutions in the domain; 2 - failures, missions and functions of a system and of its components: functional failure, missions and functions, industrial processes, notions of probability; 3 - basic concepts and operation safety: reliability, unreliability, failure density, failure rate, relations between them, availability, maintainability, safety. (J.S.)

  10. Social Housing: wood prefabrication techniques

    Directory of Open Access Journals (Sweden)

    Tiziana Ferrante

    2012-10-01

    Full Text Available Student housing, a particular and quite significant part of social housing, and innovation in processing and production of industrial building components made of a material (wood not adequately inquired: two fields of research that have been explored for a long time allowing here to share and compare experiences gained thus far. By a selection of samples of wooden student housing in Europe we have documented the performances of this material and we have underlined, at the same time, through what happens abroad, the need of an organic national social housing plan that can meet an unsatisfied demand and boost the construction industry during this particular stage of economic crisis.

  11. Development and validation of a house finch interleukin-1β (HfIL-1β) ELISA system.

    Science.gov (United States)

    Kim, Sungwon; Park, Myeongseon; Leon, Ariel E; Adelman, James S; Hawley, Dana M; Dalloul, Rami A

    2017-08-30

    A unique clade of the bacterium Mycoplasma gallisepticum (MG), which causes chronic respiratory disease in poultry, has resulted in annual epidemics of conjunctivitis in North American house finches since the 1990s. Currently, few immunological tools have been validated for this songbird species. Interleukin-1β (IL-1β) is a prototypic multifunctional cytokine and can affect almost every cell type during Mycoplasma infection. The overall goal of this study was to develop and validate a direct ELISA assay for house finch IL-1β (HfIL-1β) using a cross-reactive chicken antibody. A direct ELISA approach was used to develop this system using two different coating methods, carbonate and dehydration. In both methods, antigens (recombinant HfIL-1b or house finch plasma) were serially diluted in carbonate-bicarbonate coating buffer and either incubated at 4 °C overnight or at 60 °C on a heating block for 2 hr. To generate the standard curve, rHfIL-1b protein was serially diluted at 0, 3, 6, 9, 12, 15, 18, 21, and 24 ng/mL. Following blocking and washing, anti-chicken IL-1b polyclonal antibody was added, plates were later incubated with detecting antibodies, and reactions developed with tetramethylbenzidine solution. A commercially available anti-chicken IL-1β (ChIL-1β) polyclonal antibody (pAb) cross-reacted with house finch plasma IL-1β as well as bacterially expressed recombinant house finch IL-1β (rHfIL-1β) in immunoblotting assays. In a direct ELISA system, rHfIL-1β could not be detected by an anti-ChIL-1β pAb when the antigen was coated with carbonate-bicarbonate buffer at 4°C overnight. However, rHfIL-1β was detected by the anti-ChIL-1β pAb when the antigen was coated using a dehydration method by heat (60°C). Using the developed direct ELISA for HfIL-1β with commercial anti-ChIL-1β pAb, we were able to measure plasma IL-1β levels from house finches. Based on high amino acid sequence homology, we hypothesized and demonstrated cross-reactivity of

  12. Expert systems for design, operation and management of industrial plant elctrical systems

    Energy Technology Data Exchange (ETDEWEB)

    Delfino, B.; Forzano, P.; Invernizzi, M.; Massucco, S. (Genoa Univ. (Italy) Pavia Univ. (Italy) Ansaldo Industria, Genoa (Italy))

    1991-02-01

    A discussion is made of modern industrial plant requirements with regard to man-machine interfacing. Indications are then given as to the optimum hardware and software for electrical plant and process control systems. Illustrative examples are provided on the use of expert systems to aid in the design of industrial plant electrical systems and to allow safe and reliable on-line control and monitoring.

  13. Intelligent systems and soft computing for nuclear science and industry

    International Nuclear Information System (INIS)

    Ruan, D.; D'hondt, P.; Govaerts, P.; Kerre, E.E.

    1996-01-01

    The second international workshop on Fuzzy Logic and Intelligent Technologies in Nuclear Science (FLINS) addresses topics related to intelligent systems and soft computing for nuclear science and industry. The proceedings contain 52 papers in different fields such as radiation protection, nuclear safety (human factors and reliability), safeguards, nuclear reactor control, production processes in the fuel cycle, dismantling, waste and disposal, decision making, and nuclear reactor control. A clear link is made between theory and applications of fuzzy logic such as neural networks, expert systems, robotics, man-machine interfaces, and decision-support techniques by using modern and advanced technologies and tools. The papers are grouped in three sections. The first section (Soft computing techniques) deals with basic tools to treat fuzzy logic, neural networks, genetic algorithms, decision-making, and software used for general soft-computing aspects. The second section (Intelligent engineering systems) includes contributions on engineering problems such as knowledge-based engineering, expert systems, process control integration, diagnosis, measurements, and interpretation by soft computing. The third section (Nuclear applications) focusses on the application of soft computing and intelligent systems in nuclear science and industry

  14. Bacterial community changes in an industrial algae production system.

    Science.gov (United States)

    Fulbright, Scott P; Robbins-Pianka, Adam; Berg-Lyons, Donna; Knight, Rob; Reardon, Kenneth F; Chisholm, Stephen T

    2018-04-01

    While microalgae are a promising feedstock for production of fuels and other chemicals, a challenge for the algal bioproducts industry is obtaining consistent, robust algae growth. Algal cultures include complex bacterial communities and can be difficult to manage because specific bacteria can promote or reduce algae growth. To overcome bacterial contamination, algae growers may use closed photobioreactors designed to reduce the number of contaminant organisms. Even with closed systems, bacteria are known to enter and cohabitate, but little is known about these communities. Therefore, the richness, structure, and composition of bacterial communities were characterized in closed photobioreactor cultivations of Nannochloropsis salina in F/2 medium at different scales, across nine months spanning late summer-early spring, and during a sequence of serially inoculated cultivations. Using 16S rRNA sequence data from 275 samples, bacterial communities in small, medium, and large cultures were shown to be significantly different. Larger systems contained richer bacterial communities compared to smaller systems. Relationships between bacterial communities and algae growth were complex. On one hand, blooms of a specific bacterial type were observed in three abnormal, poorly performing replicate cultivations, while on the other, notable changes in the bacterial community structures were observed in a series of serial large-scale batch cultivations that had similar growth rates. Bacteria common to the majority of samples were identified, including a single OTU within the class Saprospirae that was found in all samples. This study contributes important information for crop protection in algae systems, and demonstrates the complex ecosystems that need to be understood for consistent, successful industrial algae cultivation. This is the first study to profile bacterial communities during the scale-up process of industrial algae systems.

  15. Shock to the system: Restructuring America's electricity industry

    International Nuclear Information System (INIS)

    Brennan, T.J.; Palmer, K.L.; Kopp, R.J.; Krupnick, A.J.; Stagliano, V.

    1996-01-01

    Recent decades have seen revolutions in communications, finance, and transportation. In a similar way, technological, economic, and political developments are reshaping the US electricity industry. This concise, balanced, and readable primer, produced by a team of economic analysts at Resources for the Future, introduces the concepts, crucial elements, and terminology used in discussions about electricity restructuring. A Shock to the System provides the background necessary to understand the increasing role of competition in electricity markets. The authors present the history of public policy regarding electricity, identify the significant proposals for implementing competition, and examine their potential consequences for utility regulation, industry structure, cost recovery, and the environment. This volume is an instructive guide to the decisions that electricity providers, customers, and policy makers will face, what forms the decisions are likely to take, and what the long-term ramifications may be

  16. The need for simulation in complex industrial systems

    Directory of Open Access Journals (Sweden)

    Aboura Khalid

    2012-10-01

    Full Text Available We discuss the concept of simulation and its application in the resolution of problems in complex industrial systems. Most problems of serious scale, be it an inventory problem, a production and distribution problem, a management of resources or process improvement, all real world problems require a mix of generic, data algorithmic and Ad-hoc solutions making the best of available information. We describe two projects in which analytical solutions were applied or contemplated. The first case study uses linear programming in the optimal allocation of advertising resources by a major internet service provider. The second study, in a series of projects, analyses options for the expansion of the production and distribution network of mining products, as part of a sensitive strategic business review. Using the examples, we make the case for the need of simulation in complex industrial problems where analytical solutions may be attempted but where the size and complexity of the problem forces a Monte Carlo approach.

  17. Two-phase systems. Fundamentals and industrial applications

    International Nuclear Information System (INIS)

    Woillez, Jacques

    2014-01-01

    Two-phase flows are omnipresent in industrial processes in different sectors with the behaviour and control of non-mixing mixtures of gas and liquids, of several liquids, of solids and fluids which are present in the production of raw materials, in the environment, in energy production, in chemistry, in pharmaceutical or food industry. The author presents the fundamentals elements which are needed to perform hardware predictive calculations and to understand typical phenomena associated with these flows. The chapters address fluids mechanics (movement equations, Bernoulli equation, load losses, turbulence, heat exchange coefficients, thermodynamics, compressible flows), two-phase systems (characteristic values, modes of appearance of two-phase flows, conduct flows, suspension mechanics, mass transfers, similarity, numerical simulation), the applications (energy production, agitation and mixing, phase separation, sprays), and peculiar phenomena (Marangoni effect, the tea cup effect, entry jets, water hammer effect, sound speed, two-phase pumping, fluidization)

  18. Web monitoring of industrial signals using embedded systems

    Directory of Open Access Journals (Sweden)

    Cesar Augusto Romero-Molano

    2016-01-01

    Full Text Available The paper presents the design of software and hardware for a system of web monitoring of industrial signals. This prototype provides a web interface which can observe in real time the status of four industrial-type signal on-off. MSP432 microcontroller is used for sampling and transmitting monitored signals to a Raspberry PI which receives by a UART link the MSP432 monitored data and presents them immediately in the front-end web application. The prototype design was verified with a pneumatic application that consists of four single-acting cylinders and it was observed an efficient synchronization between the occurrence of the triggering event or change in status of any of the monitored cylinder and web publishing.

  19. Implementation of Industrial Narrow Band Communication System into SDR Concept

    Directory of Open Access Journals (Sweden)

    A. Prokes

    2008-12-01

    Full Text Available The rapid expansion of the digital signal processing has penetrated recently into a sphere of high performance industrial narrow band communication systems which had been for long years dominated by the traditional analog circuit design. Although it brings new potential to even increase the efficiency of the radio channel usage it also forces new challenges and compromises radio designers have to face. In this article we describe the design of the IF sampling industrial narrowband radio receiver, optimize a digital receiver structure implemented in a single FPGA circuit and study the performance of such radio receiver architecture. As an evaluation criterion the communication efficiency in form of maximum usable receiver sensitivity, co-channel rejection, adjacent channel selectivity and radio blocking measurement have been selected.

  20. Alternative power supply systems for remote industrial customers

    Science.gov (United States)

    Kharlamova, N. V.; Khalyasmaa, A. I.; Eroshenko, S. A.

    2017-06-01

    The paper addresses the problem of alternative power supply of remote industrial clusters with renewable electric energy generation. As a result of different technologies comparison, consideration is given to wind energy application. The authors present a methodology of mean expected wind generation output calculation, based on Weibull distribution, which provides an effective express-tool for preliminary assessment of required installed generation capacity. The case study is based on real data including database of meteorological information, relief characteristics, power system topology etc. Wind generation feasibility estimation for a specific territory is followed by power flow calculations using Monte Carlo methodology. Finally, the paper provides a set of recommendations to ensure safe and reliable power supply for the final customers and, subsequently, to provide sustainable development of the regions, located far from megalopolises and industrial centres.

  1. An examination of expert systems activities within the nuclear industry

    International Nuclear Information System (INIS)

    Bernard, J.A.; Washio, Takashi.

    1988-01-01

    This paper provides an overview of a detailed evaluation that the authors recently completed on expert systems applications within the nuclear industry. That evaluation examined the motivation for utilizing expert systems, identified the areas to which they were being applied, and provided an assessment of their utility. Listed here are some of the salient findings of that report. (1) Utilities are developing their own artificial intelligence tools rather than using commercial products. (2) Few expert systems are being developed for the express purpose of capturing human expertise. (3) A number of successful expert systems have been developed to assist in plant design, management, and maintenance scheduling. (4) Interactive diagnostic systems are being developed for the analysis of physical processes that vary slowly. (5) Real-time diagnostic expert systems are currently at the cutting edge of the technology. (6) Operator adviser and emergency response expert systems constitute ∼25% of the total. (7) Research on the use of expert systems for reactor control is quite active. (8) Too few quantitative evaluations of the benefits of expert systems to reactor operators have been performed. The operator's need is for timely, factual information on plant status. Hence, the true challenge to expert systems is real-time diagnostics

  2. 2014 Building America House Simulation Protocols

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Engebrecht-Metzger, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Horowitz, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hendron, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-03-01

    As BA has grown to include a large and diverse cross-section of the home building and retrofit industries, it has become more important to develop accurate, consistent analysis techniques to measure progress towards the program's goals. The House Simulation Protocol (HSP) document provides guidance to program partners and managers so they can compare energy savings for new construction and retrofit projects. The HSP provides the program with analysis methods that are proven to be effective and reliable in investigating the energy use of advanced energy systems and of entire houses.

  3. 2014 Building America House Simulation Protocols

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, E. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Engebrecht, C. Metzger [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Horowitz, S. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hendron, R. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2014-03-01

    As Building America has grown to include a large and diverse cross-section of the home building and retrofit industries, it has become more important to develop accurate, consistent analysis techniques to measure progress towards the program's goals. The House Simulation Protocol (HSP) document provides guidance to program partners and managers so they can compare energy savings for new construction and retrofit projects. The HSP provides the program with analysis methods that are proven to be effective and reliable in investigating the energy use of advanced energy systems and of entire houses.

  4. Managing the pharmaceutical industry-health system interface.

    Science.gov (United States)

    Zarowitz, B J; Muma, B; Coggan, P; Davis, G; Barkley, G L

    2001-12-01

    Direct-to-consumer advertising, media, and Internet marketing to physicians and patients, as well as enticing marketing strategies, are used by the pharmaceutical industry to ensure market share growth of new drugs. Our health system adopted a strict vendor policy governing detailing and sampling activities of pharmaceutical representatives, but realized that further analysis of vendor influence in our system was needed. An assessment of tangible benefits, ethical concerns, and financial liabilities and gains was conducted to reassess the need for further vendor restriction. Based on our findings, several recommendations have been made. Medical practices and health systems are encouraged to establish and enforce explicit vendor policies, measure their effectiveness, partner proactively with representatives to deliver a drug-detailing message consistent with system initiatives, monitor and regulate continuing medical education funding, and implement strategies to ensure appropriate drug use.

  5. Advancing metabolic engineering through systems biology of industrial microorganisms.

    Science.gov (United States)

    Dai, Zongjie; Nielsen, Jens

    2015-12-01

    Development of sustainable processes to produce bio-based compounds is necessary due to the severe environmental problems caused by the use of fossil resources. Metabolic engineering can facilitate the development of highly efficient cell factories to produce these compounds from renewable resources. The objective of systems biology is to gain a comprehensive and quantitative understanding of living cells and can hereby enhance our ability to characterize and predict cellular behavior. Systems biology of industrial microorganisms is therefore valuable for metabolic engineering. Here we review the application of systems biology tools for the identification of metabolic engineering targets which may lead to reduced development time for efficient cell factories. Finally, we present some perspectives of systems biology for advancing metabolic engineering further. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Advancing metabolic engineering through systems biology of industrial microorganisms

    DEFF Research Database (Denmark)

    Dai, Zongjie; Nielsen, Jens

    2015-01-01

    resources. The objective of systems biology is to gain a comprehensive and quantitative understanding of living cells and can hereby enhance our ability to characterize and predict cellular behavior. Systems biology of industrial microorganisms is therefore valuable for metabolic engineering. Here we review......Development of sustainable processes to produce bio-based compounds is necessary due to the severe environmental problems caused by the use of fossil resources. Metabolic engineering can facilitate the development of highly efficient cell factories to produce these compounds from renewable...... the application of systems biology tools for the identification of metabolic engineering targets which may lead to reduced development time for efficient cell factories. Finally, we present some perspectives of systems biology for advancing metabolic engineering further....

  7. Study on Heat Utilization in an Attached Sunspace in a House with a Central Heating, Ventilation, and Air Conditioning System

    Directory of Open Access Journals (Sweden)

    Qingsong Ma

    2018-05-01

    Full Text Available Based on numerical simulations, the heating load reduction effect of an attached sunspace in winter was determined, and the effective heat utilization method and sunspace design were explored. In this paper, we studied the heating load reduction effect using heat from the sunspace and temperature fluctuation of each room at the time of heat use from the sunspace (sending air from the sunspace to the heating, ventilation, and air conditioning (HVAC machine room and taking the air to the adjacent rooms. In the case of the all-day HVAC system, it was confirmed that a larger capacity of sunspace and not sending air from the sunspace to the adjacent room demonstrated a better heating-load reduction effect. Compared with Model Iw (a house with a window on the exterior of the sunspace opened to external air, Model I (a house with an attached sunspace on the second floor could save approximately 41% of the total energy. Model II (a house with the attached sunspace both on the first and second floors could save approximately 84% of the total energy. Sending heat from the sunspace to the adjacent room led to temperature increases in the adjacent rooms. However, if the construction plan is to have the sunspace only on the second floor, the house should be carefully designed, for example, by placing a living room on the second floor.

  8. Biogas systems for sisal and other agro-industrial residues

    Energy Technology Data Exchange (ETDEWEB)

    Jungersen, G [Danish Technological Inst., Section for Biotechnology, Taastrup (Denmark)

    1998-12-31

    Most of the East-African agro-industries are generating very large quantities of organic residues from production and processing of different crops. In the East-African Region the most important of these crops are: Sisal, Sugar, Coffee, Cashew nuts and Pineapple. In other 3. world countries, Palm oil and Cassava (Tapioca starch) processing are main producers of organic waste products. Moreover, large quantities of organic residues are generated from other food processing activities like breweries, consumption of bananas etc. The following pages give examples of setups and system designs of anaerobic treatment systems for some of the residues mentioned above. When considering anaerobic treatment of sisal residues, which constitutes the main agro-industrial biomass resource in Tanzania, two major issues should be considered: Optimal reactor set-up and performance; And optionally, potential methods for pre-treatment of fibre fraction in order to increase the methane yield. The sisal liquid residues are degraded very fast and efficiently in UASB systems. At COD loading rates less than 11 kg COD/m{sup 3} x day, the reduction in organic matter is more than 90% and methane yields obtained are between 373 and 377 ml CH{sub 4}/g COD reduced. The treatment of sisal solid residues in CSTR systems has been examined both at mesophilic (37 deg. C) and thermophilic temperatures (55 deg. C.). (EG)

  9. Biogas systems for sisal and other agro-industrial residues

    Energy Technology Data Exchange (ETDEWEB)

    Jungersen, G. [Danish Technological Inst., Section for Biotechnology, Taastrup (Denmark)

    1997-12-31

    Most of the East-African agro-industries are generating very large quantities of organic residues from production and processing of different crops. In the East-African Region the most important of these crops are: Sisal, Sugar, Coffee, Cashew nuts and Pineapple. In other 3. world countries, Palm oil and Cassava (Tapioca starch) processing are main producers of organic waste products. Moreover, large quantities of organic residues are generated from other food processing activities like breweries, consumption of bananas etc. The following pages give examples of setups and system designs of anaerobic treatment systems for some of the residues mentioned above. When considering anaerobic treatment of sisal residues, which constitutes the main agro-industrial biomass resource in Tanzania, two major issues should be considered: Optimal reactor set-up and performance; And optionally, potential methods for pre-treatment of fibre fraction in order to increase the methane yield. The sisal liquid residues are degraded very fast and efficiently in UASB systems. At COD loading rates less than 11 kg COD/m{sup 3} x day, the reduction in organic matter is more than 90% and methane yields obtained are between 373 and 377 ml CH{sub 4}/g COD reduced. The treatment of sisal solid residues in CSTR systems has been examined both at mesophilic (37 deg. C) and thermophilic temperatures (55 deg. C.). (EG)

  10. Implementation and Rejection of Industrial Steam System Energy Efficiency Measures

    Energy Technology Data Exchange (ETDEWEB)

    Therkelesen, Peter [Environmental Energy Technologies Division Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); McKane, Aimee [Environmental Energy Technologies Division Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

    2013-05-01

    Steam systems consume approximately one third of energy applied at U.S. industrial facilities. To reduce energy consumption, steam system energy assessments have been conducted on a wide range of industry types over the course of five years through the Energy Savings Assessment (ESA) program administered by the U.S. Department of Energy (U.S. DOE). ESA energy assessments result in energy efficiency measure recommendations that are given potential energy and energy cost savings and potential implementation cost values. Saving and cost metrics that measure the impact recommended measures will have at facilities, described as percentages of facility baseline energy and energy cost, are developed from ESA data and used in analyses. Developed savings and cost metrics are examined along with implementation and rejection rates of recommended steam system energy efficiency measures. Based on analyses, implementation of steam system energy efficiency measures is driven primarily by cost metrics: payback period and measure implementation cost as a percentage of facility baseline energy cost (implementation cost percentage). Stated reasons for rejecting recommended measures are primarily based upon economic concerns. Additionally, implementation rates of measures are not only functions of savings and cost metrics, but time as well.

  11. Industrial Personal Computer based Display for Nuclear Safety System

    International Nuclear Information System (INIS)

    Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min

    2014-01-01

    The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view

  12. Industrial Personal Computer based Display for Nuclear Safety System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ji Hyeon; Kim, Aram; Jo, Jung Hee; Kim, Ki Beom; Cheon, Sung Hyun; Cho, Joo Hyun; Sohn, Se Do; Baek, Seung Min [KEPCO, Youngin (Korea, Republic of)

    2014-08-15

    The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view.

  13. Complexity Analysis of Industrial Organizations Based on a Perspective of Systems Engineering Analysts

    Directory of Open Access Journals (Sweden)

    I. H. Garbie

    2011-12-01

    Full Text Available Complexity in industrial organizations became more difficult and complex to be solved and it needs more attention from academicians and technicians. For these reasons, complexity in industrial organizations represents a new challenge in the next decades. Until now, analysis of industrial organizations complexity is still remaining a research topic of immense international interest and they require reduction in their complexity. In this paper, analysis of complexity in industrial organizations is shown based on the perspective of systems engineering analyst. In this perspective, analysis of complexity was divided into different levels and these levels were defined as complexity levels. A framework of analyzing these levels was proposed and suggested based on the complexity in industrial organizations. This analysis was divided into four main issues: industrial system vision, industrial system structure, industrial system operating, and industrial system evaluating. This analysis shows that the complexity of industrial organizations is still an ill-structured and a multi-dimensional problem.

  14. Social management in traditional, industrial and post-industrial society: the prospects for management systems development

    Directory of Open Access Journals (Sweden)

    V S Mukhametzhanova

    2010-09-01

    Full Text Available The article is devoted to social management development at different stages of society's evolution - traditional, industrial and post-industrial. The historical types of social management are highlighted.

  15. Understanding of Danish passive houses based on pilot project Comfort Houses

    Energy Technology Data Exchange (ETDEWEB)

    Brunsgaard, C.

    2010-12-15

    The aim of the research is to investigate the notion of passive houses in Denmark. When this PhD thesis was initiated, the Danish building industry has just started to become interested in the passive house concept, but the knowledge was very limited. To be able to speed up the process of constructing Danish passive houses or other low energy concepts Saint-Gobain Isover Scandinavia took the initiative to the pilot project of the Comfort Houses, ten single-family houses constructed as passive houses, and wanted to share the knowledge with the building industry and other interested. This PhD thesis was a part of the strategy. If the concept of passive houses should be successfully promoted and achieve a significant sale in Denmark, it is believed that it is necessary to do a holistic approach. Besides energy savings and new structural solutions more qualitative aspects like architecture, everyday life and the future ways of living needs to be integrated in the future understanding of passive houses. This Ph.D. thesis therefore studies the following research question: What can the experience from the Comfort Houses enlighten about the future production and use of Danish passive houses? This understanding is achieved through studies of different study fields to be able to create a more holistic understanding of the concept both covering qualitative and quantitative analysis. The main focus will be on the study fields Design Process, Architecture and Everyday Life and the Indoor environment, which will answer the following sub-research questions: 1) How has the consortiums behind the Comfort Houses approached the design process according to teamwork, method and tools? And what barriers and possibilities lie within the approaches? 2) How do the occupants of the Comfort Houses experience the passive house architecture and the technical service systems? And has their everyday life changed by moving into a passive house? If so, how? 3) To what extent do the Comfort Houses

  16. Multiple pump housing

    Science.gov (United States)

    Donoho, II, Michael R.; Elliott; Christopher M.

    2010-03-23

    A fluid delivery system includes a first pump having a first drive assembly, a second pump having a second drive assembly, and a pump housing. At least a portion of each of the first and second pumps are located in the housing.

  17. Space power plants and power-consuming industrial systems

    International Nuclear Information System (INIS)

    Latyshev, L.; Semashko, N.

    1996-01-01

    An opportunity to create the space power production on the basis of solar, nuclear and fusion energies is analyzed. The priority of solar power production as the most accessible and feasible in comparison with others is emphasized. However, later on, it probably will play an auxiliary role. The possibilities of fusion power production, as a basic one in future, are also considered. It is necessary to create reactors using the fueling cycle with helium-3 (instead of tritium and deuterium, later on). The reaction products--charged particles, mainly--allow one to organize the system of direct fusion energy conversion into electricity. The produced energy is expected not to be transmitted to Earth, but an industry in space is expected to be produced on its basis. The industrial (power and science-consuming) objects located on a whole number of space apparatus will form a single complex with its own basic power plant. The power transmission within the complex will be realized with high power density fluxes of microwave radiation to short distances with their receivers at the objects. The necessary correction of the apparatus positions in the complex will be done with ion and plasma thrusters. The materials present on the Moon, asteroids and on other planets can serve as raw materials for industrial objects. Such an approach will help to improve the ecological state on Earth, to eliminate the necessity in the fast energy consumption growth and to reduce the hazard of global thermal crisis

  18. Application of system-level FMEA in the nuclear industry

    International Nuclear Information System (INIS)

    Crocker, W.; Parmar, R.; Salvador, M.; Forystek, A.; Xu, C.

    2012-01-01

    Failure Modes and Effects Analysis (FMEA) is an analytical technique used to assess risk that is applied in various industries such as aerospace, automotive and health care. A recent application in the nuclear industry of FMEA methodology to support the design modification process at a major electrical utility in Ontario is examined. This application of FMEA involves assessing proposed design changes by systematically identifying various component failure modes and their effect on the parent system with respect to the related employee, environmental, production and nuclear safety impact. In doing so, any design weaknesses are identified along with potential corrective actions such as adding redundant components. FMEA is being applied early in the design process with the focus on finding the problems before equipment is installed where failures may manifest into serious safety and economic consequences. To illustrate the application of FMEA in the nuclear industry, the results of a recent study will be presented with a walk through of the analysis process along with overall study findings. The study involved application of FMEA to support a design modification to replace the existing Condenser Steam Dump Valve (CSDV) actuator and top works (associated instrumentation, e.g., solenoid valves) on an operating reactor. (author)

  19. Application of system-level FMEA in the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Crocker, W.; Parmar, R.; Salvador, M. [AMEC NSS Ltd., Toronto, Ontario (Canada); Forystek, A.; Xu, C. [Bruce Power, Tiverton, Ontario (Canada)

    2012-07-01

    Failure Modes and Effects Analysis (FMEA) is an analytical technique used to assess risk that is applied in various industries such as aerospace, automotive and health care. A recent application in the nuclear industry of FMEA methodology to support the design modification process at a major electrical utility in Ontario is examined. This application of FMEA involves assessing proposed design changes by systematically identifying various component failure modes and their effect on the parent system with respect to the related employee, environmental, production and nuclear safety impact. In doing so, any design weaknesses are identified along with potential corrective actions such as adding redundant components. FMEA is being applied early in the design process with the focus on finding the problems before equipment is installed where failures may manifest into serious safety and economic consequences. To illustrate the application of FMEA in the nuclear industry, the results of a recent study will be presented with a walk through of the analysis process along with overall study findings. The study involved application of FMEA to support a design modification to replace the existing Condenser Steam Dump Valve (CSDV) actuator and top works (associated instrumentation, e.g., solenoid valves) on an operating reactor. (author)

  20. Water heating solar system for popular houses; Sistema solar de aquecimento de agua para residencias populares

    Energy Technology Data Exchange (ETDEWEB)

    Mogawer, Tamer; Souza, Teofilo Miguel de [Universidade Estadual Paulista (UNESP), Guaratingueta, SP (Brazil). Centro de Energias Renovaveis], e-mail: teofilo@feg.unesp.br

    2004-07-01

    In this paper we present a case study for the design of a low cost solar heating system for a popular residence in an isolated rural community in the state of Rio Grande do Norte. This scaling can be extended to several rural communities that are in the same situation in Brazil as well as the wider use of solar power between the low-income people who do not have the benefits of electricity in their homes or want to have a lower cost of electricity. In this context, there are very interesting alternatives, among which is the replacement of electric heating bath water by heating by solar energy. According to several sources the electric shower, as it is now simple and extremely cheap, is the villain of the national electrical system. It is used in peak hours of consumption, something like 10% of electric generating capacity installed in Brazil, forcing many industries to switch off the machines because of the high cost of electricity during this period. Using the heating by solar energy, we can reduce consumption of electric shower and also increase the use of clean energy in popular homes and in isolated rural communities. This paper will address the use of solar energy with the basic purpose of heating water for bathing in popular residences and in isolated rural areas, using low cost systems, built with easily materials that is found in any area of the country. (author)

  1. Vibration Propagation of Gear Dynamics in a Gear-Bearing-Housing System Using Mathematical Modeling and Finite Element Analysis

    Science.gov (United States)

    Parker, Robert G.; Guo, Yi; Eritenel, Tugan; Ericson, Tristan M.

    2012-01-01

    Vibration and noise caused by gear dynamics at the meshing teeth propagate through power transmission components to the surrounding environment. This study is devoted to developing computational tools to investigate the vibro-acoustic propagation of gear dynamics through a gearbox using different bearings. Detailed finite element/contact mechanics and boundary element models of the gear/bearing/housing system are established to compute the system vibration and noise propagation. Both vibration and acoustic models are validated by experiments including the vibration modal testing and sound field measurements. The effectiveness of each bearing type to disrupt vibration propagation is speed-dependent. Housing plays an important role in noise radiation .It, however, has limited effects on gear dynamics. Bearings are critical components in drivetrains. Accurate modeling of rolling element bearings is essential to assess vibration and noise of drivetrain systems. This study also seeks to fully describe the vibro-acoustic propagation of gear dynamics through a power-transmission system using rolling element and fluid film wave bearings. Fluid film wave bearings, which have higher damping than rolling element bearings, could offer an energy dissipation mechanism that reduces the gearbox noise. The effectiveness of each bearing type to disrupt vibration propagation in explored using multi-body computational models. These models include gears, shafts, rolling element and fluid film wave bearings, and the housing. Radiated noise is mapped from the gearbox surface to surrounding environment. The effectiveness of rolling element and fluid film wave bearings in breaking the vibro-acoustic propagation path from the gear to the housing is investigated.

  2. Photovoltaic Systems for Swedish Prosumers : A technical and economic analysis focused on cooperative multi-family housing

    OpenAIRE

    Sommerfeldt, Nelson; Muyingo, Henry; af Klintberg, Tord

    2016-01-01

    This report is designed to be a comprehensive information resource for Swedish prosumers considering an investment in solar PV systems. The target audience are multi-family cooperative houses, however much of the information is applicable to other building owners and solar energy more broadly. The primary question to be answered; is a rooftop PV investment profitable in Sweden? Naturally there are many variables that can affect the answer; therefore a Monte Carlo methodology is used to conver...

  3. Comparison of Bioactive Compound Content in Egg Yolk Oil Extracted from Eggs Obtained from Different Laying Hen Housing Systems

    OpenAIRE

    Aleksandrs Kovalcuks

    2015-01-01

    Egg yolk oil is a natural source of bioactive compounds such as unsaturated fatty acids, oil soluble vitamins, pigments and others. Bioactive compound content in egg yolk oil depends from its content in eggs, from which oil was extracted. Many studies show that bioactive compound content in egg is correlated to the content of these compounds in hen feed, but there is also an opinion that hen housing systems also have influence on egg chemical content. The aim of this stud...

  4. Entry Level Systems Analysts: What Does the Industry Want?

    Directory of Open Access Journals (Sweden)

    Donna M. Grant

    2016-06-01

    Full Text Available This study investigates the skill sets necessary for entry level systems analysts. Towards this end, the study combines two sources of data, namely, a content analysis of 200 systems analysts’ online job advertisements and a survey of 20 senior Information Systems (IS professionals. Based on Chi-square tests, the results reveal that most employers prefer entry level systems analysts with an undergraduate Computer Science degree. Furthermore, most of the employers prefer entry level systems analysts to have some years of experience as well as industry certifications. The results also reveal that there is a higher preference for entry level systems analysts who have non-technical and people skills (e.g., problem solving and oral communication. The empirical results from this study will inform IS educators as they develop future systems analysts. Additionally, the results will be useful to the aspiring systems analysts who need to make sure that they have the necessary job skills before graduating and entering the labor market.

  5. IEA HPP Annex 32 - Economical heating and cooling systems for low-energy houses. State-of-the-art report Norway

    International Nuclear Information System (INIS)

    Stene, Joern

    2007-04-01

    Norway is a member of Annex 32, 'Economical heating and cooling systems for low-energy houses' (2006-2008), organized under the umbrella of the International Energy Agency (IEA) and the IEA Heat Pump Programme (HPP). The 9 participating countries are Switzerland (Operating Agent), Austria, Canada, Germany, Japan, the Netherlands, Norway, Sweden and the USA. The Norwegian participation is financed by Enova SF, and SINTEF Energy Research is responsible for planning and carrying out the Norwegian activities. Task 1 of the project is a state-of the art analysis of the low-energy building market and heat pump technologies applied in this type of buildings. Heating demands for low-energy houses and passive houses in Norwegian climate are characterized as follows: The ratio of the annual heating demand for hot water heating and the total annual heating demand of the houses typically range from 40 to 85 percent, and the heating season for space heating and heating of ventilation air range from about 5-7 and 4-6 months per year for semi-detached houses and flats, respectively (Oslo climate). In comparison, the heating season for semi-detached houses and flats constructed in accordance with the Norwegian building codes of 1997 is 8 and 9 months, respectively. Development companies for residential properties, co-operative building societies as well as housing manufactures are now showing great interest in low-energy houses and passive houses. According to The Norwegian State Housing Bank, almost 10.000 residences with low-energy or passive house standard are now being planned, constructed or have been completed. The projects include single-family houses, semi-detached houses, row houses, block of flats and apartment buildings. The main focus in these projects has been on the architectural design, building construction and efficient ventilation systems, and less on the heating (and cooling) systems. The heat pump market in this market segment is regarded to be promising due to

  6. Industrial robots with sensors and object recognition systems

    International Nuclear Information System (INIS)

    Koehler, G.W.

    1978-01-01

    The previous development and the present status of industrial robots equipped with sensors and object recognition systems are described. This type of equipment allows flexible automation of many work stations in which industrial robots of the first generation, which are unable to react to changes in their respective environments automatically, apart from their being linked to other machines, could not be used because of the prevailing boundary conditions. A classification system facilitates an overview of the large number of technical solutions now available. The manifold possibilities of application of this equipment are demonstrated by a number of examples. As a result of the present state of development of the components required, and in view also of economic reasons, there is a trend towards special designs for a small number of specific purposes and towards stripped-down object recognition. systems with limited applications. A fitting description is offered of the term 'robot', which is now being used in various contexts, and an indication is made of the capabilities and components a machine to be called robot should have as a minimum. Finally, reference is made to some potential lines of development serving to reduce expediture and accelerate recognition processes. (orig.) [de

  7. Optimization of large-scale industrial systems : an emerging method

    Energy Technology Data Exchange (ETDEWEB)

    Hammache, A.; Aube, F.; Benali, M.; Cantave, R. [Natural Resources Canada, Varennes, PQ (Canada). CANMET Energy Technology Centre

    2006-07-01

    This paper reviewed optimization methods of large-scale industrial production systems and presented a novel systematic multi-objective and multi-scale optimization methodology. The methodology was based on a combined local optimality search with global optimality determination, and advanced system decomposition and constraint handling. The proposed method focused on the simultaneous optimization of the energy, economy and ecology aspects of industrial systems (E{sup 3}-ISO). The aim of the methodology was to provide guidelines for decision-making strategies. The approach was based on evolutionary algorithms (EA) with specifications including hybridization of global optimality determination with a local optimality search; a self-adaptive algorithm to account for the dynamic changes of operating parameters and design variables occurring during the optimization process; interactive optimization; advanced constraint handling and decomposition strategy; and object-oriented programming and parallelization techniques. Flowcharts of the working principles of the basic EA were presented. It was concluded that the EA uses a novel decomposition and constraint handling technique to enhance the Pareto solution search procedure for multi-objective problems. 6 refs., 9 figs.

  8. Effective programming of energy consuming industrial robot systems

    International Nuclear Information System (INIS)

    Trnka, K.; Pinter, T.; Knazik, M.; Bozek, P.

    2012-01-01

    This paper discusses the problem of effective motion planning for industrial robots. The first part dealt with current method for off-line motion planning. In the second part is presented the work done with one of the simulation system with automatic trajectory generation and off-line programming capability [4]. An spot welding process is involved. The practical application of this step strongly depends on the method for robot path optimization with high accuracy, thus, transform the path into a time and energy optimal robot program for the real world, which is discussed in the third step. (Authors)

  9. Driver assistant system for industrial vehicles; Fahrerassistenzsysteme fuer Nutzfahrzeuge

    Energy Technology Data Exchange (ETDEWEB)

    Winterhagen, J.

    1999-10-01

    It is the intention of DaimlerChrysler AG to automatize future industrial vehicles by means of driver assistant systems. The components - from automatic distance control to fully electric steering - are in different stages of maturity. Some prototypes were presented recently at the Papenburg test site. [German] Fahrerassistenzsysteme werden das Nutzfahrzeug der Zukunft nach Vorstellungen der DaimlerChrysler AG weitestgehend automatisieren. Die dazu notwendigen Techniken - vom automatischen Abstandsregler bis zur vollelektrischen Lenkung - haben unterschiedliche Reifegrade. Einige Prototypen stellte das Unternehmen kuerzlich auf dem Pruefgelaende Papenburg vor. (orig.)

  10. Evaluation of food safety management systems in Serbian dairy industry

    Directory of Open Access Journals (Sweden)

    Igor Tomašević

    2016-01-01

    Full Text Available This paper reports incentives, costs, difficulties and benefits of food safety management systems implementation in the Serbian dairy industry. The survey involved 27 food business operators with the national milk and dairy market share of 65 %. Almost two thirds of the assessed dairy producers (70.4 % claimed that they had a fully operational and certified HACCP system in place, while 29.6 % implemented HACCP, but had no third party certification. ISO 22000 was implemented and certified in 29.6 % of the companies, while only 11.1 % had implemented and certified IFS standard. The most important incentive for implementing food safety management systems for Serbian dairy producers was to increase and improve safety and quality of dairy products. The cost of product investigation/analysis and hiring external consultants were related to the initial set-up of food safety management system with the greatest importance. Serbian dairy industry was not greatly concerned by the financial side of implementing food safety management systems due to the fact that majority of prerequisite programmes were in place and regularly used by almost 100 % of the producers surveyed. The presence of competency gap between the generic knowledge for manufacturing food products and the knowledge necessary to develop and implement food safety management systems was confirmed, despite the fact that 58.8 % of Serbian dairy managers had university level of education. Our study brings about the innovation emphasizing the attitudes and the motivation of the food production staff as the most important barrier for the development and implementation of HACCP. The most important identified benefit was increased safety of dairy products with the mean rank scores of 6.85. The increased customer confidence and working discipline of staff employed in food processing were also found as important benefits of implementing/operating HACCP. The study shows that the level of HACCP

  11. Grooved floor system for cattle housing: ammonia emission reduction and good slip resistance

    NARCIS (Netherlands)

    Swierstra, D.; Braam, C.R.; Smits, M.C.J.

    2001-01-01

    To improve the slip resistance of solid floors in dairy cow houses and to achieve the ammonia emission reduction prescribed by the Dutch government, precast concrete floors with grooves and a dung scraper were investigated. The grooves parallel to the alley had 160 mm center-to-center spacing and

  12. Alternative Comfort System for Retrofit in Renovated Social Housing in The Netherlands

    NARCIS (Netherlands)

    Boxem, G.; Erk, van N.; Ree, van L.F.; Tuip, B.G.C.C.; Scartezzini, J-L

    2009-01-01

    In order to achieve a reduction of the energy consumption in the build environment (30% in 2020) it is a necessity to reduce the consumption of the existing building stock. For social housing (30 %) this has to be done under the condition that the total cost of living (rental+ energy costs) for the

  13. The Improvement of the Ventilation System in the Existing Terraced Houses in Malaysia

    Directory of Open Access Journals (Sweden)

    Arab Yasser

    2016-01-01

    Full Text Available This study aims to find a sustainable solution in order to reduce the indoor temperature in hot and humid climate such as Malaysia. The focus of this study is to create a new device (Air Tube which is considered to be a remedial device for the indoor spaces, and can be installed for the existed houses. The method of this study is to design the Air Tube device and install is in the rooms of second floor in semi-detached and terrace house in order to reduce the temperature few degrees. The study will depend on taking manual measurements in the site and making simulation using computer software Ecotect on 14th of February (which considered to be the hottest day in the year and trying to find the best solution to reduce the temperature in such hot and humid weather, the case study is a semi-detach house with post-modern architectural style, which is located in Sungai Petani, Kedah, Malaysia. The research finds that AirTubeis a good solution for the existed houses to decrease the temperature and reach the thermal comfortable atmosphere.

  14. The House as a Product

    NARCIS (Netherlands)

    Eekhout, A.J.C.M.; Vogler, A.

    2016-01-01

    Industrialized housing has been a common phenomenon in the building industry since the industrial revolution; the casting of iron components enabled Victorian iron casters to prefabricate entire buildings and to export them to all British colonies. It got a second boost from Modernist architects

  15. Pathology of mass housing projects in Iran (Mehr Housing Plan ...

    African Journals Online (AJOL)

    Mass housing in construction industry is known as projects that mass production methods are used to construct residential units in it. Mass housing is a model of construction that has high economic, technical and managerial feasibility and should optimize three areas of quality, time and cost. But it should be noted that in ...

  16. Maury Nussbaum reappointed as Hal G. Prillaman Professor Fellow in Industrial and Systems Engineering

    OpenAIRE

    Owczarski, Mark

    2010-01-01

    Maury Nussbaum, professor of industrial and systems engineering in the College of Engineering at Virginia Tech, has been reappointed as the Hal G. Prillaman Professor Fellow in Industrial and Systems Engineering by the Virginia Tech Board of Visitors.

  17. Brian M. Kleiner receives Ralph H. Bogle Professor Fellowship in Industrial and Systems Engineering

    OpenAIRE

    Owczarski, Mark

    2010-01-01

    Brian M. Kleiner, professor of industrial and systems engineering in the College of Engineering at Virginia Tech, has been named the Ralph H. Bogle Professor Fellow in Industrial and Systems Engineering by the Virginia Tech Board of Visitors.

  18. 20 CFR 654.404 - Housing site.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Housing site. 654.404 Section 654.404... THE EMPLOYMENT SERVICE SYSTEM Housing for Agricultural Workers Housing Standards § 654.404 Housing site. (a) Housing sites shall be well drained and free from depressions in which water may stagnate...

  19. Woodworking & housing: impacts & actions

    Science.gov (United States)

    Matt Bumgardner; Urs Buehlmann; Karen. Koenig

    2015-01-01

    The woodworking industry relies heavily on the construction-based markets, particularly those companies involved in cabinetry, furniture, millwork and components. Market conditions, trends and investments all have an impact. It's against this backdrop, that the sixth annual housing market study was conducted in early 2015. A joint effort by Virginia Tech, the U.S...

  20. Gamma-ray scatter methods applied to industrial measurement systems

    Energy Technology Data Exchange (ETDEWEB)

    Holstad, Marie Bueie

    2004-09-01

    Throughout the work presented in this dissertation it has been confirmed that the use of scattered gamma-radiation is a complex but useful tool in industrial measurement science. Scattered radiation has shown to be useful both when traditional measurement principles cannot be used (Chapter 4) and when more information about a system is needed than what is obtained with transmission measurements (Chapter 6). All three main projects (Chapters 4, 5 and 6) confirm that the sensitivity and accuracy of systems based on scattered gamma-radiation depends strongly on the geometry of the setup and that that presence of multiple scattered radiation makes the problems complex. Chapter 4 shows that multiple scattered gamma-radiation can be used for detection of changes in density where the dimensions are too large to use transmitted radiation. There is, however, an upper limit on the thickness of the absorbing medium also when scattered radiation is utilized. As seen in Chapter 5, multiple scattered gamma-radiation can in principle also be used in level gauges with very compact measurement geometries. The main challenges are the sensitivity to interfaces between materials with similar densities and low count rate. These challenges could not be overcome for level measurements in gravitational separator tanks. The results presented in Chapter 6 show that it is feasible to combine transmission and scatter measurements to characterize produced water in the oil and gas industry. (Author)