Analysis of the impacts of combining carbon taxation and emission trading on different industry sectors

International Nuclear Information System (INIS)

Lee, Cheng F.; Lin, Sue J.; Lewis, Charles

2008-01-01

Application of price mechanisms has been the important instrument for carbon reduction, among which the carbon tax has been frequently advocated as a cost-effective economic tool. However, blanket taxes applied to all industries in a country might not always be fair or successful. It should therefore be implemented together with other economic tools, such as emission trading, for CO 2 reduction. This study aims to analyze the impacts of combining a carbon tax and emission trading on different industry sectors. Results indicate that the 'grandfathering rule (RCE2000)' is the more feasible approach in allocating the emission permit to each industry sector. Results also find that the accumulated GDP loss of the petrochemical industry by the carbon tax during the period 2011-2020 is 5.7%. However, the accumulated value of GDP will drop by only 4.7% if carbon taxation is implemented together with emission trading. Besides, among petrochemical-related industry sectors, up-stream sectors earn profit from emission trading, while down-stream sectors have to purchase additional emission permits due to failure to achieve their emission targets

An Analysis of Industry and Sector-Specific Impacts of a Japan-Philippines Economic Partnership

OpenAIRE

Escolar, Royce Elvin O.

2004-01-01

The paper aims to identify industry and macrolevel factors that affect competitiveness of selected sectors upon the implementation of the JPEPA. Priority sectors identified by the Department of Trade and Industry, accounting for 82% of total Philippine exports to Japan in 2002, were included in the study. For Philippine industries to gain, market access issues on trade facilitation, nontariff barriers and recognition of standards come into play especially for the service and agricultural sect...

Regional total factor energy efficiency: An empirical analysis of industrial sector in China

International Nuclear Information System (INIS)

Wang, Zhao-Hua; Zeng, Hua-Lin; Wei, Yi-Ming; Zhang, Yi-Xiang

2012-01-01

Highlights: ► We evaluate energy efficiency under framework of total factor energy efficiency. ► We focus on industry sector of China. ► We use statistical data of industrial enterprises above designated size. ► Energy efficiencies among regions in China are obvious because of technological differences. ► Large scale of investment should be stopped especially in central and western regions. -- Abstract: The rapid growth of the Chinese economy has resulted in great pressure on energy consumption, especially the energy intensive sector – the industrial sector. To achieve sustainable development, China has to consider how to promote energy efficiency to meet the demand of Chinese rapid economic growth, as the energy efficiency of China is relatively low. Meanwhile, the appeal of energy saving and emission reduction has been made by the Chinese central government. Therefore, it is important to evaluate the energy efficiency of industrial sector in China and to assess efficiency development probabilities. The framework of total factor energy efficiency index is adopted to determine the discrepancy of energy efficiency in Chinese industrial sector based on the provincial statistical data of industrial enterprises above designated size in 30 provinces from 2005 to 2009, with gross industrial output as the output value and energy consumption, average remaining balance of capital assets and average amount of working force as the input values. Besides, in considerate of the regional divide of China, namely eastern, central, and western, and economic development differences in each region, energy efficiency of each region is also analysed in this paper. The results show that there is room for China to improve its energy efficiency, especially western provinces which have large amount of energy input excess. Generally speaking, insufficient technological investment and fail of reaching best scale of manufacture are two factors preventing China from energy

Energy consumption in the industrial sector. Evolution and perspectives; Consumo energetico en el sector industrial. Evolucion y perspectivas

Energy Technology Data Exchange (ETDEWEB)

Vieyra Fernandez, Arturo; Cortes Mendez, Carlos

1993-12-31

This article has the purpose of analyzing the main determinants of energy use in the industrial sector, standing out the economical, social and technological implications that determine a specific consumption pattern, departing from which, -as first hand indicators- the efficiency conditions under which this consumption is effected, are evaluated. Likewise, a break-up by branch for the analysis is proposed, taking as a reference point the importance of each one of these in the sector global consumption as well as the available information for each one of them. Finally, the execution of a prospective with an horizon to the year 2005, taking into consideration a macroeconomic scenario, in general, and the potential saving for each sub-sector, in particular, is proposed. [Espanol] El articulo tiene como finalidad analizar los determinantes principales del consumo energetico del sector industrial, destacando las implicaciones de caracter economico, social y tecnologico que conlleva a un patron especifico de consumo, a partir del cual se evaluan - con indicadores de primera mano - las condiciones de eficiencia bajo las cuales se realiza dicho consumo. Asimismo, se propone una desagregacion por rama para el analisis, tomando como punto de referencia la importancia de cada una de estas en el consumo global del sector, asi como la informacion disponible para cada una. Finalmente, se propone un ejercicio de prospectiva con un horizonte hasta el ano 2005 tomando en consideracion un escenario macroeconomico en general y el potencial de ahorro para cada subsector en particular.

Energy consumption in the industrial sector. Evolution and perspectives; Consumo energetico en el sector industrial. Evolucion y perspectivas

Energy Technology Data Exchange (ETDEWEB)

Vieyra Fernandez, Arturo; Cortes Mendez, Carlos

1992-12-31

This article has the purpose of analyzing the main determinants of energy use in the industrial sector, standing out the economical, social and technological implications that determine a specific consumption pattern, departing from which, -as first hand indicators- the efficiency conditions under which this consumption is effected, are evaluated. Likewise, a break-up by branch for the analysis is proposed, taking as a reference point the importance of each one of these in the sector global consumption as well as the available information for each one of them. Finally, the execution of a prospective with an horizon to the year 2005, taking into consideration a macroeconomic scenario, in general, and the potential saving for each sub-sector, in particular, is proposed. [Espanol] El articulo tiene como finalidad analizar los determinantes principales del consumo energetico del sector industrial, destacando las implicaciones de caracter economico, social y tecnologico que conlleva a un patron especifico de consumo, a partir del cual se evaluan - con indicadores de primera mano - las condiciones de eficiencia bajo las cuales se realiza dicho consumo. Asimismo, se propone una desagregacion por rama para el analisis, tomando como punto de referencia la importancia de cada una de estas en el consumo global del sector, asi como la informacion disponible para cada una. Finalmente, se propone un ejercicio de prospectiva con un horizonte hasta el ano 2005 tomando en consideracion un escenario macroeconomico en general y el potencial de ahorro para cada subsector en particular.

Evaluation of the sector network for the industry's system of analysis 1996-2002; Evaluering av bransjenettverket for industris analyseordning 1996-2002

Energy Technology Data Exchange (ETDEWEB)

Roenning, Anne; Modahl, Ingunn Saur

2005-07-01

Enova wanted to carry out an evaluation of the sector network for the industry's analysis arrangement 1996-2002. This evaluation considers the arrangement's results in relation to its purposes, and contains an assessment of its effects related to energy consumption and energy efficiency. The data is based on meeting with IFE (Institute for Energy Technology), a survey among the sector network's member companies, interviews with advisors, companies and IFE, a survey among the advisors, and reported data from companies to IFE's database of applications and final reports. The methodology for collection of data on energy saving is based on a direct method instead of an indirect method, originally planned. Based on this evaluation it is concluded that the sector network analysis arrangement or advisory service has been a success. The evaluation has revealed that the industry has gained knowledge about possibilities for a more efficient and environmentally-friendly energy consumption, i.e. an increased competency of action. Additionally, based on the feedback from the companies in the surveys, it was revealed that the companies after the participation in the analysis have carried out energy saving measures equal to 809 GWh. The target figure for the analysis arrangement was energy savings of 350 GWh before 2005 (ml)

Universal Industrial Solution and Industrial Sectors Module for Pulp and Paper Sector

Science.gov (United States)

Increased concerns over air pollution and its detrimental effects on health have called for more stringent emission reduction strategies in the industrial sector. However, stringent regulatory policies can potentially adversely affect domestic and international trade. Therefore E...

Análisis del fracaso empresarial por sectores: factores diferenciadores = Cross-industry analysis of business failure: differential factors

Directory of Open Access Journals (Sweden)

María Jesús Mures Quintana

2012-12-01

Full Text Available El objetivo de este trabajo se centra en el análisis del fracaso empresarial por sectores, a fin de identificar los factores explicativos y predictivos de este fenómeno que son diferentes en tres de los principales sectores que se distinguen en toda economía: industria, construcción y servicios. Para cada uno de estos sectores, seguimos el mismo procedimiento. En primer lugar, aplicamos un análisis de componentes principales con el que identificamos los factores explicativos del fracaso empresarial en los tres sectores. A continuación, consideramos dichos factores como variables independientes en un análisis discriminante, que aplicamos para predecir el fracaso de una muestra de empresas, utilizando no sólo información financiera en forma de ratios, sino también otras variables no financieras relativas a las empresas, así como información externa a las mismas que refleja las condiciones macroeconómicas bajo las que desarrollan su actividad. This paper focuses on a cross-industry analysis of business failure, in order to identify the explanatory and predictor factors of this event that are different in three of the main industries in every economy: manufacturing, building and service. For each one of these industries, the same procedure is followed. First, a principal components analysis is applied in order to identify the explanatory factors of business failure in the three industries. Next, these factors are considered as independent variables in a discriminant analysis, so as to predict the firms’ failure, using not only financial information expressed by ratios, but also other non-financial variables related to the firms, as well as external information that reflects macroeconomic conditions under which they develop their activity.

Global Sectoral Industry Approaches to Climate Change. The Way Forward

International Nuclear Information System (INIS)

Stigson, B.; Egenhofer, C.; Fujiwara, N.

2008-01-01

The structure of some industrial sectors is so highly concentrated that just a handful of companies are responsible for producing a significant share of that sector's total greenhouse gases emissions worldwide. These sectors are thus a 'natural' focus of policy-makers concerned with climate change and have attracted keen interest from the EU. So-called 'sectoral approaches' are seen as having the potential to broaden the range of contributions by all parties, including emerging economies, to greenhouse gas emissions reductions, and to help moderate competitiveness concerns in trade-exposed industries. In particular, such approaches may help to quantify emissions on a sector-by-sector basis, building confidence that policies and measures can be put in place to reduce emissions. They can also help identify national or global commitments through the aggregation of sectoral data. While sectoral approaches allow policy-makers to concentrate on those individual sectors that contribute significantly to global emissions, they also pose a number of challenges. This CEPS Task Force Report identifies the principal issues associated with sectoral approaches - their rationale and the associated political dynamics - and gives an overview of existing approaches, the formulation of preconditions that would allow sectoral approaches to be implemented and an analysis of the potential interaction of sectoral approaches with existing climate change policies. The concluding chapter sketches a possible way forward

Strategies for Low Carbon Growth In India: Industry and Non Residential Sectors

Energy Technology Data Exchange (ETDEWEB)

Sathaye, Jayant; de la Rue du Can, Stephane; Iyer, Maithili; McNeil, Michael; Kramer, Klaas Jan; Roy, Joyashree; Roy, Moumita; Chowdhury, Shreya Roy

2011-04-15

This report analyzed the potential for increasing energy efficiency and reducing greenhouse gas emissions (GHGs) in the non-residential building and the industrial sectors in India. The first two sections describe the research and analysis supporting the establishment of baseline energy consumption using a bottom up approach for the non residential sector and for the industry sector respectively. The third section covers the explanation of a modeling framework where GHG emissions are projected according to a baseline scenario and alternative scenarios that account for the implementation of cleaner technology.

Embodied energy use in China's industrial sectors

International Nuclear Information System (INIS)

Liu Zhu; Geng Yong; Lindner, Soeren; Zhao Hongyan; Fujita, Tsuyoshi; Guan Dabo

2012-01-01

As the world’s top energy consumer, China is facing a great challenge to solve its energy supply issue. In this paper energy use from all industrial sectors in China’s economy of 2007 was explored by conducting an extended environmental input–output analysis. We compare the energy consumption embodied in the final demand for goods and services from 29 sectors with the energy demand required for the actual production process in each sector. Two different viewpoints for sectoral energy use have been presented: energy use is directly allocated to the producer entity, and energy use is reallocated to sector’s supply chain from consumption perspective. Our results show that considerable amount of energy use is embodied in the supply chain, especially for “Construction” and “Other Service Activities” sectors, which is not detected if energy use is allocated on a production basis. When further dividing embodied energy consumption into direct energy consumption and indirect energy consumption, total indirect energy consumption is much higher than that of total direct energy consumption, accounting for 80.6% of total embodied energy consumption in 2007. Our results provide a more holistic picture on sectoral energy consumption and therefore can help decision-makers make more appropriate policies. - Highlights: ► A hybrid IO-LCA model was employed to analyze China’s energy use at sectoral level. ► A case study on China’s sectoral energy consumption is done. ► Construction and service sectors are actually energy intensive from the supply chain perspectives. ► Upstream and downstream ectoral collaboration along the whole supply chain is necessary. ► Energy conservation policies should be based upon a comprehensive analysis on sectoral energy use.

Modelling energy demand of Croatian industry sector

DEFF Research Database (Denmark)

Medić, Zlatko Bačelić; Pukšec, Tomislav; Mathiesen, Brian Vad

2014-01-01

Industry represents one of the most interesting sectors when analysing Croatian final energy demand. Croatian industry represents 20% of nation's GDP and employs 25% of total labour force making it a significant subject for the economy. Today, with around 60 PJ of final energy demand...... it is the third most energy intensive sector in Croatia after transport and households. Implementing mechanisms that would lead to improvements in energy efficiency in this sector seems relevant. Through this paper, long-term energy demand projections for Croatian industry will be shown. The central point...... for development of the model will be parameters influencing the industry in Croatia. Energy demand predictions in this paper are based upon bottom-up approach model. IED model produces results which can be compared to Croatian National Energy Strategy. One of the conclusions shown in this paper is significant...

Analysis of the industrial sector representation in the Fossil2 energy-economic model

International Nuclear Information System (INIS)

Wise, M.A.; Woodruff, M.G.; Ashton, W.B.

1992-08-01

The Fossil2 energy-economic model is used by the US Department of Energy (DOE) for a variety of energy and environmental policy analyses. A number of improvements to the model are under way or are being considered. This report was prepared by the Pacific Northwest Laboratory (PNL) to provide a clearer understanding of the current industrial sector module of Fossil2 and to explore strategies for improving it. The report includes a detailed description of the structure and decision logic of the industrial sector module, along with results from several simulation exercises to demonstrate the behavior of the module in different policy scenarios and under different values of key model parameters. The cases were run with the Fossil2 model at PNL using the National Energy Strategy Actions Case of 1991 as the point of departure. The report also includes a discussion of suggested industrial sector module improvements. These improvements include changes in the way the current model is used; on- and off-line adjustments to some of the model's parameters; and significant changes to include more detail on the industrial processes, technologies, and regions of the country being modeled. The potential benefits and costs of these changes are also discussed

Voluntary agreements in the industrial sector in China

Energy Technology Data Exchange (ETDEWEB)

Price, Lynn; Worrell, Ernst; Sinton, Jonathan

2003-03-31

China faces a significant challenge in the years ahead to continue to provide essential materials and products for a rapidly-growing economy while addressing pressing environmental concerns. China's industrial sector is heavily dependent on the country's abundant, yet polluting, coal resources. While tremendous energy conservation and environmental protection achievements were realized in the industrial sector in the past, there remains a great gulf between the China's level of energy efficiency and that of the advanced countries of the world. Internationally, significant energy efficiency improvement in the industrial sector has been realized in a number of countries using an innovative policy mechanism called Voluntary Agreements. This paper describes international experience with Voluntary Agreements in the industrial sector as well as the development of a pilot program to test the use of such agreements with two steel mills in Shandong Province, China.

[Health, hospitality sector and tobacco industry].

Science.gov (United States)

Abella Pons, Francesc; Córdoba Garcia, Rodrigo; Suárez Bonel, Maria Pilar

2012-11-01

To present the strategies used by the tobacco industry to meet government regulatory measures of its products. To demonstrate the relationship between tobacco industry and the hospitality sector. Note that the arguments and strategies used routinely by the hospitality industry have been previously provided by the tobacco industry. Location of key documents by meta-search, links to declassified documents, specific websites of the tobacco and hospitality industry, news sources and published articles in health journals. This review reveals the close relationship between tobacco industry and hospitality sector. It highlights the strategies carried out by the tobacco industry, including strategic hoarding of information, public relations, lobbying, consultation program, smoker defence groups, building partnerships, intimidation and patronage. The arguments and strategies used by the hospitality industry to match point by point that used by the tobacco industry. These arguments are refutable from the point of view of public health as it is scientifically proven that totally smoke-free environments are the only way to protect non-smokers from tobacco smoke exposure and its harmful effects on health. Copyright © 2011 Elsevier España, S.L. All rights reserved.

Energy efficiency in the industrial sector. Model based analysis of the efficient use of energy in the EU-27 with focus on the industrial sector; Energieeffizienz in der Industrie. Modellgestuetzte Analyse des effizienten Energieeinsatzes in der EU-27 mit Fokus auf den Industriesektor

Energy Technology Data Exchange (ETDEWEB)

Kuder, Ralf

2014-01-09

subsectors of the industry could be split up into energy intensive subsectors where single production processes dominate the energy consumption, and non-energy intensive subsectors. Ways to reduce the energy consumption in the industrial sector are the use of alternative or improved production or cross cutting technologies and the use of energy saving measures to reduce the demand for useable energy. Based on the analysis within this study, 21 % of the current energy consumption of the industrial sector of the EU and 17 % in Germany could be reduced. Based on the extended understanding of energy efficiency, the model based scenario analysis of the European energy system with the further developed energy system model TIMES PanEU shows that the efficient use of energy at an emission reduction level of 75 % is a slightly increasing primary energy consumption. The primary energy consumption is characterised by a diversified energy carrier and technology mix. Renewable energy sources, nuclear energy and CCS play a key role in the long term. In addition the electricity demand in combination with a strong decarbonisation of the electricity generation is increasing constantly. In the industrial sector the emission reduction is driven by the extended use of electricity, CCS and renewables as well as by the use of improved or alternative process and supply technologies with lower specific energy consumption. Thereby the final energy consumption stays almost on a constant level with increasing importance of electricity and biomass. Both regulatory interventions in the electricity sector and energy saving targets on the primary energy demand lead to higher energy system costs and therewith to a decrease of efficiency based on the extended understanding. The energy demand is reduced stronger than it is efficient and the saving targets lead to the extended use of other resources resulting in totally higher costs. The integrated system analysis in this study points out the interactions

Voluntary GHG reduction of industrial sectors in Taiwan.

Science.gov (United States)

Chen, Liang-Tung; Hu, Allen H

2012-08-01

The present paper describes the voluntary greenhouse gas (GHG) reduction agreements of six different industrial sectors in Taiwan, as well as the fluorinated gases (F-gas) reduction agreement of the semiconductor and Liquid Crystal Display (LCD) industries. The operating mechanisms, GHG reduction methods, capital investment, and investment effectiveness are also discussed. A total of 182 plants participated in the voluntary energy saving and GHG reduction in six industrial sectors (iron and steel, petrochemical, cement, paper, synthetic fiber, and textile printing and dyeing), with 5.35 Mt reduction from 2004 to 2008, or 33% higher than the target goal (4.02 Mt). The reduction accounts for 1.6% annual emission or 7.8% during the 5-yr span. The petrochemical industry accounts for 49% of the reduction, followed by the cement sector (21%) and the iron and steel industry (13%). The total investment amounted to approximately USD 716 million, in which, the majority of the investment went to the modification of the manufacturing process (89%). The benefit was valued at around USD 472 million with an average payback period of 1.5 yr. Moreover, related energy saving was achieved through different approaches, e.g., via electricity (iron and steel), steam and oil consumption (petrochemical) and coal usage (cement). The cost for unit CO(2) reduction varies per industry, with the steel and iron industrial sector having the highest cost (USD 346 t(-1) CO(2)) compared with the average cost of the six industrial sectors (USD 134 t(-1) CO(2)). For the semiconductor and Thin-Film Transistor LCD industries, F-gas emissions were reduced from approximately 4.1 to about 1.7 Mt CO(2)-eq, and from 2.2 to about 1.1 Mt CO(2)-eq, respectively. Incentive mechanisms for participation in GHG reduction are also further discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

Market Report for the Industrial Sector, 2009

Energy Technology Data Exchange (ETDEWEB)

Sastri, Bhima [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Brueske, Sabine [Energetics Inc., Columbia, MD (United States); de los Reyes, Pamela [Energetics Inc., Columbia, MD (United States); Jamison, Keith [Energetics Inc., Columbia, MD (United States); Justiniano, Mauricio [Energetics Inc., Columbia, MD (United States); Margolis, Nancy [Energetics Inc., Columbia, MD (United States); Monfort, Joe [Energetics Inc., Columbia, MD (United States); Raghunathan, Anand [Energetics Inc., Columbia, MD (United States); Sabouni, Ridah [Energetics Inc., Columbia, MD (United States)

2009-07-01

This report provides an overview of trends in industrial-sector energy use. It focuses on some of the largest and most energy-intensive industrial subsectors and several emerging technologies that could transform key segments of industry.

End-use energy analysis in the Malaysian industrial sector

Energy Technology Data Exchange (ETDEWEB)

Saidur, R.; Masjuki, H.H. [Department of Mechanical Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia); Rahim, N.A.; Mekhilef, S.; Ping, H.W. [Department of Electrical Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia); Jamaluddin, M.F. [Tenaga Nasional Berhad (TNB), Head Office, Bangsar, Kuala Lumpur (Malaysia)

2009-02-15

The industrial sector is the second largest consumer of energy in Malaysia. In this energy audit, the most important parameters that have been collected are as follows: power rating and operation time of energy-consuming equipments/machineries; fossil fuel and other sources of energy use; production figure; peak and off-peak tariff usage behavior and power factor. These data were then analyzed to investigate the breakdown of end-use equipments/machineries energy use, the peak and off-peak usage behavior, power factor trend and specific energy use. The results of the energy audit showed that the highest electrical energy-using equipment was an electric motor followed by pumps and air compressors. The specific energy use has been estimated and compared with four Indonesian industries and it was found that three Malaysian industries were more efficient than the Indonesian counterpart. The study also found that about 64% electrical energy was used in peak hours by the industries and the average power factor ranged from 0.88 to 0.92. The study also estimated energy and bill savings using highly efficient electrical motors along with the payback period. (author)

Role of Manufacturing Sector and Trade, Hotel, Restaurant Sector In East Java’s Economy: Input Output Analysis

Directory of Open Access Journals (Sweden)

Anggari Marya Kresnowati

2016-11-01

Full Text Available This study aimed to (1 analyze the relationship the manufacturing sector and the trade, hotel, and restaurant sector with other sectors in East Java, (2 to analyze the economic impact caused the two sectors based on the multiplier effect, (3 and analyze the economic impact caused by these two sectors if there additional investment funds. This study uses data analysis input output 2010 East Java 19x19 aggregation sector.The results indicate that base metals subsector has the highest linkages to other sectors. Based on household income multiplier effect, trade subsector has the greatest multiplier. Employment multiplier in trade and industrial sectors are in medium rank. This is indicates that the labor has been absorbed well in both sectors. The output multiplier effect, subsector non-metal goods, except petroleum and coal has the highest multiplier. The last, according to the analysis of investment injection simulations Input-Output East Java in 2010, subsector other processing industries has a best value added. Overall, the manufacturing sector has a better influence to East Java's economy than trade, hotel, and restaurant sector.

Measuring the influence of industry sector membership on supply chain disruption reporting.

Science.gov (United States)

Alcantara, Patrick

2015-01-01

The global Supply Chain Resilience Survey by the Business Continuity Institute and Zurich Insurance is a comprehensive study on the state of supply chains in different organisations worldwide. As a benchmarking tool, it also contains data about business continuity arrangements in place to ensure supply chain resilience. Given this study's historically qualitative approach to reporting, this paper aims to introduce quantitative analysis. In this paper, responses that report membership in Standard Industrial Classification 2007 industry sectors from the 2013 Supply Chain Resilience Survey were disaggregated and related to supply chain disruption reporting. A chi-square test of independence reveals that membership in a particular industry sector influences reporting of supply chain disruption. Nonetheless, the relationship between these variables is weak. This study demonstrates interesting differences between industry sectors in terms of supply chain resilience. Further research is required in terms of other variables in order to provide granularity and relevant findings to supply chain planners.

Trends in worker hearing loss by industry sector, 1981-2010.

Science.gov (United States)

Masterson, Elizabeth A; Deddens, James A; Themann, Christa L; Bertke, Stephen; Calvert, Geoffrey M

2015-04-01

The purpose of this study was to estimate the incidence and prevalence of hearing loss for noise-exposed U.S. workers by industry sector and 5-year time period, covering 30 years. Audiograms for 1.8 million workers from 1981-2010 were examined. Incidence and prevalence were estimated by industry sector and time period. The adjusted risk of incident hearing loss within each time period and industry sector as compared with a reference time period was also estimated. The adjusted risk for incident hearing loss decreased over time when all industry sectors were combined. However, the risk remained high for workers in Healthcare and Social Assistance, and the prevalence was consistently high for Mining and Construction workers. While progress has been made in reducing the risk of incident hearing loss within most industry sectors, additional efforts are needed within Mining, Construction and Healthcare and Social Assistance. © 2015 Wiley Periodicals, Inc.

Market potential for solar thermal energy supply systems in the United States industrial and commercial sectors: 1990--2030

International Nuclear Information System (INIS)

1991-12-01

This report revises and extends previous work sponsored by the US DOE on the potential industrial market in the United States for solar thermal energy systems and presents a new analysis of the commercial sector market potential. Current and future industrial process heat demand and commercial water heating, space heating and space cooling end-use demands are estimated. The PC Industrial Model (PCIM) and the commercial modules of the Building Energy End-Use Model (BEEM) used by the DOE's Energy Information Administration (EIA) to support the recent National Energy Strategy (NES) analysis are used to forecast industrial and commercial end-use energy demand respectively. Energy demand is disaggregated by US Census region to account for geographic variation in solar insolation and regional variation in cost of alternative natural gas-fired energy sources. The industrial sector analysis also disaggregates demand by heat medium and temperature range to facilitate process end-use matching with appropriate solar thermal energy supply technologies. The commercial sector analysis disaggregates energy demand by three end uses: water heating, space heating, and space cooling. Generic conceptual designs are created for both industrial and commercial applications. Levelized energy costs (LEC) are calculated for industrial sector applications employing low temperature flat plate collectors for process water preheat; parabolic troughs for intermediate temperature process steam and direct heat industrial application; and parabolic dish technologies for high temperature, direct heat industrial applications. LEC are calculated for commercial sector applications employing parabolic trough technologies for low temperature water and space heating. Cost comparisons are made with natural gas-fired sources for both the industrial market and the commercial market assuming fuel price escalation consistent with NES reference case scenarios for industrial and commercial sector gas markets

Energy Audit as a Tool for Improving System Efficiency in Industrial Sector

OpenAIRE

Gopi Srinath,; N. Uday Kumar

2014-01-01

This paper presents the characteristics of energy consumption in industrial sector, the methodology and results of energy audits (EA) performed in industrial sites and potentials for energy efficiency (EE) improvements. The present state of industrial energy in India could be characterized by significant technological out-of–date, low energy efficiency and low level of environmental protection. Presented analysis of the results of conducted energy audits in selected industrial...

Association of Parkinson's disease with industry sectors: a French nationwide incidence study.

Science.gov (United States)

Vlaar, Tim; Kab, Sofiane; Schwaab, Yannick; Fréry, Nadine; Elbaz, Alexis; Moisan, Frédéric

2018-05-05

In order to identify working environments at risk for Parkinson's disease (PD), we investigated the relation between the importance of industry sectors, used as a surrogate for occupational exposures, and PD incidence in French cantons. The number of incident PD cases (2010-2014) in 3689 cantons of metropolitan France was determined using drug claims from French National Health Insurance databases. The proportions of workers in 38 industry sectors in 2006 were calculated for each canton. Associations between the proportions of workers in industry sectors and PD age/sex-standardized incidence ratios were examined using incidence rate ratios (IRR) and 95% confidence intervals (CI) estimated with multilevel negative binomial regressions with a random intercept at the canton-level and adjusted for smoking, deprivation index, and density of neurologists. We then used two-step semi-Bayes hierarchical regression (HR) to include prior information about exposure to pesticides, metals, and solvents in each industry sector. We identified 112,625 incident cases. PD incidence was higher in areas characterized by high proportions of workers in "Agriculture, forestry and fishing" (IRR HR  = 1.042; CI 95% = 1.014-1.070; p-Trend HR  = 0.004), "Manufacture of textiles, wearing apparel, leather and related products" (IRR HR  = 1.024; CI 95% = 1.005-1.044; p-Trend HR  = 0.010), and "Manufacture of basic metals and fabricated metal products, except machinery and equipment" (IRR HR  = 1.024; CI 95% = 1.003-1.046; p-Trend HR  = 0.071). This nationwide study, based on a comprehensive analysis of industry sectors, shows significant associations between high proportions of workers in specific industry sectors (agriculture, metallurgy, textile) and PD incidence that may be targeted in further epidemiological studies to replicate and better understand these associations.

Decomposition of toxicity emission changes on the demand and supply sides: empirical study of the US industrial sector

Science.gov (United States)

Fujii, Hidemichi; Okamoto, Shunsuke; Kagawa, Shigemi; Managi, Shunsuke

2017-12-01

This study investigated the changes in the toxicity of chemical emissions from the US industrial sector over the 1998-2009 period. Specifically, we employed a multiregional input-output analysis framework and integrated a supply-side index decomposition analysis (IDA) with a demand-side structural decomposition analysis (SDA) to clarify the main drivers of changes in the toxicity of production- and consumption-based chemical emissions. The results showed that toxic emissions from the US industrial sector decreased by 83% over the studied period because of pollution abatement efforts adopted by US industries. A variety of pollution abatement efforts were used by different industries, and cleaner production in the mining sector and the use of alternative materials in the manufacture of transportation equipment represented the most important efforts.

Analysis of the quality of work life in the sewing sector of a clothing industry

Directory of Open Access Journals (Sweden)

Danielly Silva de Aquino

2012-08-01

Full Text Available The objective of this research was to analyze the quality of work life in the sewing sector of a clothing industry located in the Northwest of the Paraná. The research is characterized as an exploratory and descriptive case study. The instrument of data collection was an adaptation of the model considered for Walton. For data analysis descriptive statistics and the diagram of boxes were used (boxplot. The results had disclosed that the eight criterions of the quality of work life investigated had presented levels of satisfaction greater than 50%. A satisfactory general average can be evidenced (66.85% among the employees of the sewing sector in relation to the quality of work life. Although the presented levels of satisfaction, it would be interesting to take some measures aiming to improve them even more. These measures should be directed to the analysis of the criterion “proper and fair compensation”, which presented the worst average and greater dispersion among investigated criteria.

Integrated IDA–ANN–DEA for assessment and optimization of energy consumption in industrial sectors

International Nuclear Information System (INIS)

Olanrewaju, O.A.; Jimoh, A.A.; Kholopane, P.A.

2012-01-01

This paper puts forward an integrated approach, based on logarithmic mean divisia index (LMDI) – an index decomposition analysis (IDA) method, an artificial neural network (ANN) and a data envelopment analysis (DEA) for the analysis of total energy efficiency and optimization in an industrial sector. The energy efficiency assessment and the optimization of the proposed model use LMDI to decompose energy consumption into activity, structural and intensity indicators, which serve as inputs to the ANN. The ANN model is verified and validated by performing a linear regression comparison between the specifically measured energy consumption and the corresponding predicted energy consumption. The proposed approach utilizes the measure-specific, super-efficient DEA model for sensitivity analysis to determine the critical measured energy consumption and its optimization reductions. The proposed method is validated by its application to determine the efficiency computation and an analysis of historical data as well as the prediction and optimization capability of the Canadian industrial sector. -- Highlights: ► An integrated IDA–ANN–DEA model for energy management is proposed. ► The model relies on aggregate energy and GDP data. ► The model explains how energy can be managed in the Canadian Industrial sector.

Economic development and multiple air pollutant emissions from the industrial sector.

Science.gov (United States)

Fujii, Hidemichi; Managi, Shunsuke

2016-02-01

This study analyzed the relationship between economic growth and emissions of eight environmental air pollutants (carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), nitrogen oxide (NOx), sulfur oxide (SOx), carbon monoxide (CO), non-methane volatile organic compound (NMVOC), and ammonia (NH3)) in 39 countries from 1995 to 2009. We tested an environmental Kuznets curve (EKC) hypothesis for 16 individual industry sectors and for the total industrial sector. The results clarified that at least ten individual industries do not have an EKC relationship in eight air pollutants even though this relationship was observed in the country and total industrial sector level data. We found that the key industries that dictated the EKC relationship in the country and the total industrial sector existed in CO2, N2O, CO, and NMVOC emissions. Finally, the EKC turning point and the relationship between economic development and trends of air pollutant emissions differ among industries according to the pollution substances. These results suggest inducing new environmental policy design such as the sectoral crediting mechanism, which focuses on the industrial characteristics of emissions.

Universal industrial sectors integrated solutions module for the pulp and paper industry.

Science.gov (United States)

Bhander, Gurbakhash; Jozewicz, Wojciech

2017-09-01

The U.S. is the world's second-leading producer of pulp and paper products after China. Boilers, recovery furnaces, and lime kilns are the dominant sources of emissions from pulp and paper mills, collectively accounting for more than 99 % of the SO 2 , almost 96 % of the NO X , and more than 85 % of the particulate matter (PM) emitted to the air from this sector in the U.S. The process of developing industrial strategies for managing emissions can be made efficient, and the resulting strategies more cost-effective, through the application of modeling that accounts for relevant technical, environmental and economic factors. Accordingly, the United States Environmental Protection Agency is developing the Universal Industrial Sectors Integrated Solutions module for the Pulp and Paper Industry (UISIS-PNP). It can be applied to evaluate emissions and economic performance of pulp and paper mills separately under user-defined pollution control strategies. In this paper, we discuss the UISIS-PNP module, the pulp and paper market and associated air emissions from the pulp and paper sector. After illustrating the sector-based multi-product modeling structure, a hypothetical example is presented to show the engineering and economic considerations involved in the emission-reduction modeling of the pulp and paper sector in the U.S.

Understanding industrial energy use: Physical energy intensity changes in Indian manufacturing sector

International Nuclear Information System (INIS)

Sudhakara Reddy, B.; Kumar Ray, Binay

2011-01-01

This study develops and examines physical energy intensity indicators in five industrial sub-sectors-iron and steel, aluminum, textiles, paper, and cement-and investigates mitigation options for energy related CO 2 emissions (during 1991-2005). Decomposition analysis has been employed to separate the structural effect (share of different products in the sector) from pure intensity effect (efficiency increase through technical improvement) for each industry. The results show that the combined effect (considering both structural and intensity effects together) on both iron and steel and paper and pulp industries is negative while it is positive for aluminum and textiles. The intensity effect for all the industries, barring textiles, is negative showing improvement in energy efficiency; iron and steel in particular, has seen a decrease of 134 PJ in energy consumption owing to improvements in efficiency. However, energy intensity in textiles has risen by 47 PJ due to increased mechanization. Structural effect is positive in aluminum and iron and steel industries indicating a movement towards higher energy-intensive products. In the case of aluminum, positive structural effect dominates over negative intensive effect whereas negative intensive effect dominates iron and steel industry. The paper helps in designing policies for improving productivity and reduce energy consumption in India's manufacturing sector. - Highlights: → The study develops physical energy intensity indicators in industrial sub-sectors of India. → It identifies technological and other options for reduction in energy consumption. → The study quantifies savings in energy as well as CO 2 emissions. → The indicators are useful in examining structural changes.

Development of Eco-Industry Sector

OpenAIRE

Mariana Ioviţu

2012-01-01

Measures to encourage development of Eco-industries represent an important part of the programs of many countries; analyses of different international organisms reveal a series of advantages of this sector for economy. According to OCDE “The environmental goods and services industry consists of activities which produce goods and services to measure, prevent, limit, minimize or correct environmental damage to water, air and soil, as well as problems related to waste, noise and Eco-systems”. Th...

Energy efficiency programs and policies in the industrial sector in industrialized countries

Energy Technology Data Exchange (ETDEWEB)

Galitsky, Christina; Price, Lynn; Worrell, Ernst

2004-06-01

About 37% of the primary energy consumed both in the U.S. and globally is used by the industrial sector. A variety of energy efficiency policies and programs have been implemented throughout the world in an effort to improve the energy efficiency of this sector. This report provides an overview of these policies and programs in twelve industrialized nations and the European Union (EU). We focus on energy efficiency products and services that are available to industrial consumers, such as reports, guidebooks, case studies, fact sheets, profiles, tools, demonstrations, roadmaps and benchmarking. We also focus on the mechanisms to communicate the availability and features of these products and services and to disseminate them to the industrial consumers who can use them. Communication channels include customer information centers and websites, conferences and trade shows, workshops and other training mechanisms, financial assistance programs, negotiated agreements, newsletters, publicity, assessments, tax and subsidy schemes and working groups. In total, over 30 types of industrial sector energy efficiency products, services and delivery channels have been identified in the countries studied. Overall, we found that the United States has a large variety of programs and offers industry a number of supporting programs for improving industrial energy efficiency. However, there are some products and services found in other industrialized countries that are not currently used in the U.S., including benchmarking programs, demonstration of commercialized technologies and provision of energy awareness promotion materials to companies. Delivery mechanisms found in other industrialized countries that are not employed in the U.S. include negotiated agreements, public disclosure and national-level tax abatement for energy-efficient technologies.

The strategic industrial sectors of the green economy: stakes and perspectives

International Nuclear Information System (INIS)

Albertini, Jean-Paul; Larrieu, Catherine; Griot, Alain

2013-03-01

Proposing a transverse analysis and a synthesis, the first part of this voluminous report discusses the evolution of the context since 2009 for the green industry sector, outlines and comments the development stakes for the different sectors, analyses and comments their main evolutions for the last three years, outlines the development potential and perspectives of these activities in France, and proposes an overview of strategic policies implemented in the field of green economy in different countries (USA, Germany, United Kingdom, Japan, China, South Korea). The second part addresses the evolution and perspectives of each sector: energy production from renewable sources (biofuels, biomass, marine energies, wind energy, geothermal energy, solar energy), optimization of natural energy consumption (building with low environmental impact, green chemistry, hydrogen and fuel cells, biomaterials, optimization of industrial processes, smart grids, energy storage, low-carbon vehicles), natural resource life cycle management (CO 2 capture and storage, water, purification and ecologic engineering, metrology and instrumentation, recycling and waste valorization)

Modelling of energy / technology actions and measures for reducing greenhouse gas emissions in the industrial sector (the industry challenge)

International Nuclear Information System (INIS)

Nyboer, J.; Bailie, A.J.; Sadownik, B.

2001-01-01

The potential in Canadian industry for the reduction of greenhouse gas emissions is assessed in this report. The analysis is aimed at providing a comprehensive and integrated evaluation of a wide spectrum of technology and energy actions available to the industrial sector in Canada, providing estimates of greenhouse gas emissions reductions, costs and cost effectiveness for different actions by 2010, and simulating industry response to defined measures approved by representatives of the industry sector sub-table. The impacts of a set of measures was determined using in-house models. Four measures were tested against several actions including primary fossil and electricity consumption, using regionally specific energy prices, a discount rate approximating 40 per cent and growth rates derived from the Analysis and Modelling Group. Enhancement of voluntary initiatives, enhanced cogeneration, financial incentives for capital investment to improve efficiency and carbon dioxide emissions reduction, and a set of cost-of-carbon-dioxide simulations were the measures tested. Total energy consumption and carbon dioxide emissions by sector and in aggregate are provided as well as the costs. An indication of the total cost of reduction per tonne, some sense of the cost of the permit and the quantity of a subsidy required to induce decision-makers to purchase the more efficient technology are also provided. 9 refs., tabs

The gas market and sector in France. Situation and predictions 2018 - Sector and competitive analysis

International Nuclear Information System (INIS)

2017-01-01

Through a detailed analysis of market determining factors, of evolutions of supply and demand, and of major events in firms life, this set of two reports proposes an analysis of the recent situation of the gas sector and of the evolutions of the competitive game. The first report on situation and predictions which is updated three times a year, proposes a synthesis on the consequences of the evolution of the economic environment, on major trends noticed for the sector, and on predictable evolutions. It proposes the most recent predictions regarding natural gas consumption in France and the turnover of the gas sector. It highlights recent events for companies of the sector: takeovers, investments, restructuring, introduction of new products, and so on. It proposes a sector-based dashboard which contains all the critical figures useful to analyse the sector situation (activity determining factors, key figures for the sector and its environment). The second report (the annual one) proposes an overview of trends and competition within the gas sector. It gives an overview of some basic aspects of the activity (sector organisation, gas categories, main customer markets, gas consumption in industry), and of its determining factors, analyses the sector environment (sites connected to the natural gas network, evolution of average temperatures in France, production by chemical industry, by the food industry, and by metallurgy and oil refining, thermal production of electricity, regulatory evolution regarding supports to energy efficiency, and new opportunities). The evolution of the sector activity is analysed through its trends and indicators (turnovers, gas consumption, butane-propane deliveries, wholesale prices, regulated tariffs). The economic structure is also analysed: aspects related to the upstream part (extraction, injection of biogas, natural gas main input and output points, transport and storage, natural gas distribution), and aspects related to gas provision

Industrial and institutional restructuring of the Russian electricity sector: Status and issues

International Nuclear Information System (INIS)

Engoian, Alda

2006-01-01

The reform of the Russian electricity industry represents one of the largest and most technically complex post-Soviet era industrial restructurings. This paper presents the framework, status, and perspectives for the Russian electricity sector liberalisation. Uncertainties regarding the effective implementation of the reform are specifically examined. Ultimately the critical analysis of the reform questions the feasibility and adequacy of the recommended measures in the specific Russian context. Current theories fail to answer a fundamental issue, namely how to promote investment in an obsolete electrical infrastructure and, more generally, whether a pure free market model is compatible with physical constraints posed by the electricity sector. A careless deregulation of the Russian electricity system could hinder the country's stable and sustainable development, as its economy and the population's service have traditionally been closely linked to the electricity industry

Industrial and institutional restructuring of the Russian electricity sector: status and issues

International Nuclear Information System (INIS)

Engoian, A.

2006-01-01

The reform of the Russian electricity industry represents one of the largest and most technically complex post-Soviet era industrial restructurings. This paper presents the framework, status, and perspectives for the Russian electricity sector liberalisation. Uncertainties regarding the effective implementation of the reform are specifically examined. Ultimately the critical analysis of the reform questions the feasibility and adequacy of the recommended measures in the specific Russian context. Current theories fail to answer a fundamental issue, namely how to promote investment in an obsolete electrical infrastructure and, more generally, whether a pure free market model is compatible with physical constraints posed by the electricity sector. A careless deregulation of the Russian electricity system could hinder the country's stable and sustainable development, as its economy and the population's service have traditionally been closely linked to the electricity industry. (author)

The value premium within and across GICS industry sectors in a pre-financial collapse sample

Directory of Open Access Journals (Sweden)

Kenneth E. Scislaw

2015-12-01

Full Text Available A portfolio manager employing a top-down/bottom-up method who seeks to capture the value premium long promised in academic literature would want to first determine whether the premium exists across industries and not just observed in firm-specific book-to-market (BE/ME relationships. Next, the investor would want to know if BE/ME characteristics are stable across these defined homogeneous groups or whether there is considerable variation. Results show that certain industries appear to have a natural or structural tendency to reflect either a high or low BE/ME characteristic. Results also shows that growth-oriented industry BE/ME characteristics appear to be more stable than value-oriented industries over time. Moreover, stocks from growth-oriented industries tend to cluster at high rates in the lowest BE/ME quintile, while stocks from value-oriented industries appear more evenly distributed across middle BE/ME quintiles over time. Value stocks found in growth sectors outperform value stocks in value sectors, contrary to prior published results. The January premium exists both within and across Global Industry Classification Standard industry sectors, but the value premium is not subsumed by the January effect in either analysis.

Challenges facing the food industry: Examples from the baked goods sector

DEFF Research Database (Denmark)

Hansen, Zaza Nadja Lee; Jacobsen, Peter

2013-01-01

This paper investigates the challenges in the food industry, illustrated by a case study from the baked goods sector in Denmark. The paper proposes key elements this sector needs to address in order to limit waste, improve productivity and increase profitability.......This paper investigates the challenges in the food industry, illustrated by a case study from the baked goods sector in Denmark. The paper proposes key elements this sector needs to address in order to limit waste, improve productivity and increase profitability....

Industry sector analysis, Mexico: Electric power production and distribution equipment. Export Trade Information

International Nuclear Information System (INIS)

Wood, J.S.; Miller, R.W.

1988-09-01

The Industry Sector Analyses (I.S.A.) for electric power production and distribution equipment contains statistical and narrative information on projected market demand, end-users, receptivity of Mexican consumers to U.S. products, the competitive situation - Mexican production, total import market, U.S. market position, foreign competition, and competitive factors, and market access - Mexican tariffs, non-tariff barriers, standards, taxes and distribution channels. The I.S.A. provides the United States industry with meaningful information regarding the Mexican market for electric power production and distribution equipment

Transferability of Industrial Engineering Methods to the Healthcare Sector

DEFF Research Database (Denmark)

Edwards, Kasper; Nielsen, Anders Paarup; Hasle, Peter

for discussing the implications of transferring such industrial engineering methods to the healthcare sector. The conclusion of the review suggest that is possible to use lean as an inspiration for improvements of both efficiency, quality and working conditions provided diligent consideration of the particulars....... With no hope of getting substantial more resources healthcare managers and politicians has begun to look for alternative modes of organization. In doing so the healthcare sector is being exposed to industrial rationalization principles such as lean manufacturing. The question is whether lean opens...... of health care organization in comparison with manufacturing industry....

Transferability of Industrial Engineering Methods to the Healthcare Sector

DEFF Research Database (Denmark)

Edwards, Kasper; Nielsen, Anders P.; Hasle, Peter

2011-01-01

for discussing the implications of transferring such industrial engineering methods to the healthcare sector. The conclusion of the review suggest that is possible to use lean as an inspiration for improvements of both efficiency, quality and working conditions provided diligent consideration of the particulars....... With no hope of getting substantial more resources healthcare managers and politicians has begun to look for alternative modes of organization. In doing so the healthcare sector is being exposed to industrial rationalization principles such as lean manufacturing. The question is whether lean opens...... of health care organization in comparison with manufacturing industry....

An Environmental Sector Plan for the nuclear industry in England and Wales

International Nuclear Information System (INIS)

Bennett, D.; Fawcett, P.; Hunt, C.; Long, J.

2004-01-01

The Environment Agency is the principal environmental regulator in England and Wales. As part of its longer term strategic planning, it is developing 'Sector Plans' for the major industry sectors it regulates. The intent of Sector Plans is to promote improvement of the Industry's performance in order to deliver environmental benefit. One of the pilot Sector Plans developed has been for the nuclear sector. The Nuclear Sector Plan has been produced jointly with the nuclear industry as a rolling framework of agreed national environmental objectives and priorities. Operators of nuclear sites have agreed to use this framework as a basis in England and Wales for setting environmental performance targets, monitoring performance against the targets and publicly reporting on their performance. The paper describes the development of the Sector Plan, its content and further development. (Author) 3 refs

Analysis of exports of the brazilian mineral sector

Directory of Open Access Journals (Sweden)

Alison Geovani Schwingel Franck

2017-01-01

Full Text Available This study sought to analyze the pattern of specialization of exports of brazilian mineral sector, identifying the most dynamic productive sectors in the period between 1999 and 2015. For this purpose, the Import Coverage Ratio was calculated, as well as the Intra-industry Trade rate (IIT, and the Sector Concentration of Exports. Data were collected from the Foreign Trade Information Analysis System (Alice Web. The results indicated that Brazil has a few competitive mineral groups in its export basket, and that it is concentrated in a few sectors. It was found that the most competitive sectors were Niobium ore, iron, manganese, gold, aluminum, other semimanufaturado and copper.

Industrial consumers and electricity sector deregulation

International Nuclear Information System (INIS)

Jukic, A.

1999-01-01

The paper presents the electricity sector deregulation from the point of view of major industrial consumers (MIC). Possibilities and limitations of MIC's impact on the introduction and development of an open power market in some European countries, the USA and Croatia are discussed. (author)

Sectoral shift in industrial natural gas demand: A comparison with other energy types

International Nuclear Information System (INIS)

Boyd, G.; Fisher, R.; Hanson, D.; Ross, M.

1989-01-01

It has been recognized in a variety of studies that energy demand by industry has been effected not only by the changing energy intensity of the various sectors of industry, but also by the composition of industrial sector. A previous study group of the Energy Modeling Forum (EMF-8) found that sectoral shift, i.e., the relative decline in the energy intensive sectors of industry, has contributed at least one third of the decline in aggregate manufacturing energy intensity since the early 1970s. The specific types of energy use may also be important, however. For example, the effect of shifts in production by electricity intensive sectors has been shown to be somewhat different than that for fossil fuel

Scrum, Kanban and Canvas in the commercial, industrial and educational sector - A literature review

Directory of Open Access Journals (Sweden)

Yolfaris Fuertes A.

2016-06-01

Full Text Available The search was conducted using search engines and 63 sources about the themes found. In the analysis of results it is concluded that Scrum, Kanban tools and Canvas methodology, are really use full for commercial, industrial and educational sectors because contribute in the transformation of the culture of these organizations, in the commercial sector, advanced generation and production of knowledge, based on agile development methodologies as a benefit for software companies is evident; also by adopting Kanban, local companies looking to export their products to China. In another way the strong inclusion of pharmacies of all sizes, has been a topic of interest given that the consumption of drugs has increased significantly in recent times, for it is working is based business model Canvas. In the industrial sector, it was found that the application of agile methodologies delivered excellent results in quality processes, new strategies to optimize the level of productive utility by Kanban and analysis of business models and the redesign of competitive strategies are evident through the contribution of Canvas. In the education sector, the appropriation of Scrum in companies that have adopted CMMI, Kanban implemented in the public sector of higher education and Canvas as support for innovation.

Environmental assessment and investment strategies of provincial industrial sector in China — Analysis based on DEA model

Energy Technology Data Exchange (ETDEWEB)

Wang, Juan, E-mail: wangjuan_tju@163.com [College of Management and Economics, Tianjin University, Tianjin 300072 (China); Zhao, Tao [College of Management and Economics, Tianjin University, Tianjin 300072 (China); Zhang, Xiaohu [College of Civil Aviation, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu, 210016 (China)

2016-09-15

As an energy-intensive industry, the industrial sector consumes 70% of energy consumption and causes serious environmental pollution in China. Also, the government emphasized the promotion of R&D investment in the industrial sector in China's National Plan on Climate Change (2014–2020). It is meaningful and contributes to assessing energy and environmental performance, as well as R&D and industrial pollution control (IPC) investment strategies of China's industrial sector. A non-radial DEA model, as with natural and managerial disposability, was adopted to evaluate this from provincial and regional perspectives during the 2008–2012 period. Energy and environmental performance was evaluated by unified efficiency under natural disposability (UEN), unified efficiency under managerial disposability (UEM), and unified efficiency under natural and managerial disposability (UENM). The empirical results indicated that Shandong and Hainan were efficient under natural and managerial disposability, while other provinces had the potential to improve their energy and environmental performance. The number of provinces that was fit for investments of R&D and IPC increased from 2008 to 2010, then decreased in 2011 and 2012. In spite of this, many provincial industrial sectors should make efforts to reduce pollution by investment on technology. Tianjin, Heilongjiang, Jiangxi and Henan were especially the best investment objects because investments of R&D and IPC turned to be effective for them during the whole study period. Moreover, western China had the highest average UENM, followed by eastern China and central China. Eastern China and central China were rewarding to expand investments. Coal consumption was the main factor to negatively affect unified efficiency whereas the increase in economic development level was primarily responsible for the improvement of unified efficiency. According to the results, differentiated suggestions to further improve energy and

Environmental assessment and investment strategies of provincial industrial sector in China — Analysis based on DEA model

International Nuclear Information System (INIS)

Wang, Juan; Zhao, Tao; Zhang, Xiaohu

2016-01-01

As an energy-intensive industry, the industrial sector consumes 70% of energy consumption and causes serious environmental pollution in China. Also, the government emphasized the promotion of R&D investment in the industrial sector in China's National Plan on Climate Change (2014–2020). It is meaningful and contributes to assessing energy and environmental performance, as well as R&D and industrial pollution control (IPC) investment strategies of China's industrial sector. A non-radial DEA model, as with natural and managerial disposability, was adopted to evaluate this from provincial and regional perspectives during the 2008–2012 period. Energy and environmental performance was evaluated by unified efficiency under natural disposability (UEN), unified efficiency under managerial disposability (UEM), and unified efficiency under natural and managerial disposability (UENM). The empirical results indicated that Shandong and Hainan were efficient under natural and managerial disposability, while other provinces had the potential to improve their energy and environmental performance. The number of provinces that was fit for investments of R&D and IPC increased from 2008 to 2010, then decreased in 2011 and 2012. In spite of this, many provincial industrial sectors should make efforts to reduce pollution by investment on technology. Tianjin, Heilongjiang, Jiangxi and Henan were especially the best investment objects because investments of R&D and IPC turned to be effective for them during the whole study period. Moreover, western China had the highest average UENM, followed by eastern China and central China. Eastern China and central China were rewarding to expand investments. Coal consumption was the main factor to negatively affect unified efficiency whereas the increase in economic development level was primarily responsible for the improvement of unified efficiency. According to the results, differentiated suggestions to further improve energy and environmental

Potential of waste heat in Croatian industrial sector

Directory of Open Access Journals (Sweden)

Bišćan Davor

2012-01-01

Full Text Available Waste heat recovery in Croatian industry is of the highest significance regarding the national efforts towards energy efficiency improvements and climate protection. By recuperation of heat which would otherwise be wasted, the quantity of fossil fuels used for production of useful energy could be lowered thereby reducing the fuel costs and increasing the competitiveness of examined Croatian industries. Another effect of increased energy efficiency of industrial processes and plants is reduction of greenhouse gases i.e. the second important national goal required by the European Union (EU and United Nations Framework Convention on Climate Change (UNFCCC. Paper investigates and analyses the waste heat potential in Croatian industrial sector. Firstly, relevant industrial sectors with significant amount of waste heat are determined. Furthermore, significant companies in these sectors are selected with respect to main process characteristics, operation mode and estimated waste heat potential. Data collection of waste heat parameters (temperature, mass flow and composition is conducted. Current technologies used for waste heat utilization from different waste heat sources are pointed out. Considered facilities are compared with regard to amount of flue gas heat. Mechanisms for more efficient and more economic utilization of waste heat are proposed. [Acknoledgment. The authors would like to acknowledge the financial support provided by the UNITY THROUGH KNOWLEDGE FUND (UKF of the Ministry of Science, Education and Sports of the Republic of Croatia and the World Bank, under the Grant Agreement No. 89/11.

Industrial processes inventory. Sector 2

International Nuclear Information System (INIS)

1994-01-01

The work objective is to conduct a greenhouse gas emission inventory of the industrial processes in Lebanon for the year 1994. The Lebanese industry has emitted 1924.063 Gg (1.924.063 tons) of Carbon dioxide CO 2 ; 0.0003 Gg (0.3 tons) of carbon monoxide CO; 0.01112 Gg of nitrogen oxide NO; 273.888 tons of non-methane volatile organic compounds and 3.382 Gg (3.382 tons) of sulphur dioxide SO 2 . The cement industry is the major source of CO 2 emissions among the industrial processes in Lebanon. The cement industry is responsible for 76.1% of the total emissions followed by the iron and steel industry which produces 21.68% of the total CO 2 emissions from industrial processes. The NMVOC emissions are mainly produced by the use of asphalt for road paving (98.5% of total emissions by industry) followed by the food and beverage industry (1.2%). The emissions of sulphur dioxide SO 2 come from three industrial sources: the first come from the production of sulphuric acid (69.9% of total industrial emissions), the second from the cement industry (26.4% of total industrial emissions) and the third from the iron and steel mills (3.7% of total industrial emissions). Figures are presented to show the percentage distribution of various industrial sources contributions to CO 2 , NMVOC and SO 2 emissions in Lebanon. Carbon monoxide CO emissions in the industrial sector are very small. The major source is iron and steel mills and the minor source is asphalt-roofing production

A multi-sectoral decomposition analysis of city-level greenhouse gas emissions: Case study of Tianjin, China

International Nuclear Information System (INIS)

Kang, Jidong; Zhao, Tao; Liu, Nan; Zhang, Xin; Xu, Xianshuo; Lin, Tao

2014-01-01

To better understand how city-level greenhouse gas (GHG) emissions have evolved, we performed a multi-sectoral decomposition analysis to disentangle the GHG emissions in Tianjin from 2001 to 2009. Five sectors were considered, including the agricultural, industrial, transportation, commercial and other sectors. An industrial sub-sector decomposition analysis was further performed in the six high-emission industrial branches. The results show that, for all five sectors in Tianjin, economic growth was the most important factor driving the increase in emissions, while energy efficiency improvements were primarily responsible for the decrease in emissions. In comparison, the influences from energy mix shift and emission coefficient changes were relatively marginal. The disaggregated decomposition in the industry further revealed that energy efficiency improvement has been widely achieved in the industrial branches, which was especially true for the Smelting and Pressing of Ferrous Metals and Chemical Raw Materials and Chemical Products sub-sectors. However, the energy efficiency declined in a few branches, e.g., Petroleum Processing and Coking Products. Moreover, the increased emissions related to industrial structure shift were primarily due to the expansion of Smelting and Pressing of Ferrous Metals; its share in the total industry output increased from 5.62% to 16.1% during the examined period. - Highlights: • We perform the LMDI analysis on the emissions in five sectors of Tianjin. • Economic growth was the most important factor for the emissions increase. • Energy efficiency improvements mainly contributed to the emission decrease. • Negative energy intensity effect was observed in most of the industrial sub-sectors. • Industrial structure change largely resulted in emission increase

Reduction of Multi-pollutant Emissions from Industrial Sectors: The U.S. Cement Industry – A Case Study

Science.gov (United States)

For Frank Princiotta’s book, Global Climate Change—The Technology Challenge Carbon dioxide (CO2) accounts for more than 90% of worldwide CO2-eq green-house gas (GHG) emissions from industrial sectors other than power generation. Amongst these sectors, the cement industry is one ...

Analysis of the debt burden in Russian economy sectors

Directory of Open Access Journals (Sweden)

Svetlana Popova

2017-12-01

Full Text Available This paper provides an analysis of the debt burden of Russian companies and raises the issue of debt-level heterogeneity across economic sectors. To identify the causes of this heterogeneity, it estimates a regression model that includes both fundamental explanatory variables of companies and industry fixed effects. The results of the analysis demonstrate that standard variables, such as profitability, company size, asset turnover, and fixed-asset turnover ratio have a strong statistical significance. However, these do not fully explain the variation in the debt levels of companies in different sectors. According to model estimation, there are other industry specific factors that produce an imbalance between fundamental factors and companies’ debt levels. An understanding of the formation process and structure of debt burden in individual industries is extremely important for the financial stability of companies and for an effective monetary policy.

External analysis of the smartphone industry in Spain

OpenAIRE

Nájera Aragón, Fernando

2014-01-01

The main purpose of this end-of-grade project will be the external analysis of an industrial sector, in this case the Smartphone industry. The analysis will be based on Porter’s competitive force model, which allows us to study the competition among the sector and what companies are now leading the market and why. Although it is a market in continuous growth worldwide, this project will focus on how the smartphone market works in Spain. The project will be divided in four main parts, intro...

The deregulation of network industries: is the electricity sector an exception?

International Nuclear Information System (INIS)

Coppens, F.; Vivet, D.

2006-01-01

In view of their special characteristics, network industries have for quite a long time been considered as (natural) monopolies. Network externalities and economies of scale in particular justified this (natural) monopoly thesis. Since the last decade of the past century, however, a trend towards deregulation of such industries has been observed worldwide. This trend started with the successful introduction of competition in the telecommunications sector. The success in that sector is often used as an argument for opening up other network industries to competition as well. The study analyses whether this reasoning can be applied to the electricity sector. At first glance, the sectors electricity and telecommunications seem very similar, as both are network industries having been characterised for a long time by economies of scale, but for which technological progress may have put an end to this scale effect. However, the study points out that there are important differences. In the telecommunications sector, technological progress on the supply side has been accompanied by a strong growth in demand. There is no such demand side effect in the electricity branch. Moreover, due to physical characteristics, the electricity sector seems to be more complicated. In order to introduce competition, the sector has to be split up into sub-sectors (production, transmission, distribution and supply). Only two segments, production and supply, are considered as open markets; transmission and distribution, on the other hand, remain monopolies. This splitting up, however, entails a new kind of costs, the so-called transaction costs. As such the gains from the liberalization in certain segments might (partly) offset increase in the transaction costs resulting from vertical disintegration. (authors)

Statistical Compilation of the ICT Sector and Policy Analysis | Page 5 ...

International Development Research Centre (IDRC) Digital Library (Canada)

The project is designed to expand the scope of conventional investigation beyond the telecommunications industry to include other vertically integrated components of the ICT sector such as manufacturing and services. ... Statistical Compilation of the ICT Sector and Policy Analysis project : country experiences; Malaysia.

Sensemaking and politics in MNCs: A comparative analysis of vocabularies within the global manufacturing discourse in one industrial sector

OpenAIRE

Geppert, M

2003-01-01

This article compares sensemaking processes in multinational corporations (MNCs) situated in the same industrial sector. Our comparative analysis of three MNCs and their subsidiaries in Germany and the United Kingdom aims to shed light on the contextual dimension (institutions, culture, and politics) of the sensemaking process. First, I discuss ideologies related to the discourse about global restructuring of manufacturing. Second, I compare similarities and differences in vocabularies of the...

FDI spillovers at different levels of industrial and spatial aggregation: Evidence from the electricity sector

International Nuclear Information System (INIS)

Del Bo, Chiara F.

2013-01-01

The European electricity sector has undergone significant reforms in recent years, in the direction of market opening, integration and privatization. National and regional markets are now characterized by the presence of domestic and foreign firms, both privately and publicly owned. Did foreign entry induce positive productivity spillovers to domestic firms in the electricity sector, both at the aggregate and disaggregated level, while also controlling for domestic firms' ownership? This paper examines this issue by focusing on regional foreign direct investment (FDI) spillovers in the aggregated electricity sector and in the disaggregated sub-sectors of generation and distribution. The results show the importance of industry aggregation in determining the existence and sign of regional FDI spillovers for domestic firms. FDI spillovers are then calculated based on a purely geographic scale, by considering the distance between each firm's city of location and firms in neighboring cities. The importance and sign of FDI spillovers is different with respect to the analysis based on regional administrative boundaries, suggesting that spatial aggregation, along with industrial aggregation, is relevant in accounting for productivity spillover effects of foreign presence in the EU electricity sector. - Highlights: • Has the post-reform entry of foreign firms in the EU electricity sector induced spillover effects? • Spatial and industrial disaggregation are important when evaluating foreign direct investment (FDI) spillovers. • Positive horizontal spillovers are found only in the distribution segment of the industry. • Vertical spillovers in generation are negative; positive in distribution. • Spillover intensity in distribution decreasing with distance; regional dimension relevant in generation

Estimating Employment Dynamics across Occupations and Sectors of Industry

OpenAIRE

Cörvers, Frank; Dupuy, Arnaud

2009-01-01

In this paper, we estimate the demand for workers by sector and occupation using system dynamic OLS techniques to account for the employment dynamics dependence across occupations and sectors of industry. The short run dynamics are decomposed into intra and intersectoral dynamics. We find that employment by occupation and sector is significantly affected by the short run intersectoral dynamics, using Dutch data for the period 1988-2003. On average, these intersectoral dynamics account for 20%...

China's economic reform and industry sector energy requirement: A forecast to 2015

International Nuclear Information System (INIS)

Gu, A.Y.

1997-01-01

With its GDP growing at an average rate of 9.8% for the last seventeen years, China has the world's fastest growing economy. This rapid pace of growth and industrialization has caused economic strain because fuel production cannot keep pace with demand, If China allows this situation to continue, significant oil imports will be necessary. In 1993, the industrial sector contributed 56% to China's GDP and consumed 61% of the total final energy. The industrial sector will remain the largest energy consumer in China well into the next century. According to China's Ninth Five-Year Plan (1996--2000), China will strengthen its ability to develop new products and will use technological advancement to promote industrial development. The Plan calls for special attention in four major areas: microelectronics technology, digital technology, software technology, and network technology. Given China's emphasis on developing light industries and on improving industrial sector energy efficiency, it is important to study the future energy demand of the industrial sector. Two scenarios for future energy requirements are studied through the year 2015: a Business As Usual (BASU) scenario and an Energy Efficient (EE) scenario. The study evaluates China's current economic reform policies and energy efficiency policies. The results of this evaluation are used to assign appropriate growth rates to industrial GDP and the industrial energy intensity for both scenarios. Results from the two scenarios are compared and analyzed

The critical role of the industrial sector in reaching long-term emission reduction, energy efficiency and renewable targets

International Nuclear Information System (INIS)

Fais, Birgit; Sabio, Nagore; Strachan, Neil

2016-01-01

Highlights: • A new industrial modelling approach in a whole energy systems model is developed. • The contribution of UK industry to long-term energy policy targets is analysed. • Emission reductions of up to 77% can be achieved in the UK industry until 2050. • The UK industry sector is essential for achieving the overall efficiency commitments. • UK industry can make a moderate contribution to the expansion of renewable energies. - Abstract: This paper evaluates the critical contribution of the industry sector to long-term decarbonisation, efficiency and renewable energy policy targets. Its methodological novelty is the incorporation of a process-oriented modelling approach based on a comprehensive technology database for the industry sector in a national energy system model for the UK (UKTM), allowing quantification of the role of both decarbonisation of upstream energy vectors and of mitigation options in the industrial sub-categories. This enhanced model is then applied in a comparative policy scenario analysis that explores various target dimensions on emission mitigation, renewable energy and energy efficiency at both a national and European level. The results show that ambitious emission cuts in the industry sector of up to 77% until 2050 compared to 2010 can be achieved. Moreover, with a reduction in industrial energy demand of up to 31% between 2010 and 2050, the sector is essential for achieving the overall efficiency commitments. The industry sector also makes a moderate contribution to the expansion of renewable energies mostly through the use of biomass for low-temperature heating services. However, additional sub-targets on renewable sources and energy efficiency need to be assessed critically, as they can significantly distort the cost-efficiency of the long-term mitigation pathway.

Is the Societal burden of fatal occupational injury different among NORA industry sectors?

Science.gov (United States)

Biddle, Elyce Anne

2015-01-01

Problem Since the implementation of the Occupational Safety and Health Act, safety and health in the work environment has seen marked improvement. Although these improvements are laudable, workplace hazards continue to plague the American worker. Understanding the economic burden of fatalities by industry sector is important to setting broad occupational safety and health research priorities. Cost estimates provide additional information about how fatal injuries affect society and hence can improve injury prevention program planning, policy analysis, evaluation, and advocacy. Method This study estimated the total, mean, and median societal costs by worker and case characteristic in 2003–2006 for the industry sectors identified in the National Institute for Occupational Safety and Health National Occupational Research Agenda (NORA). Analyses were conducted with restricted access to the Bureau of Labor Statistics Census of Fatal Occupational Injuries data. These data exclude military personnel, decedents with unknown age or sex, and fatalities occurring in New York City. Societal costs were estimated using the cost-of-illness approach, which combines direct and indirect costs to yield an overall cost of an fatal occupational injury. Results During this period, the cost of the 22,197 fatal occupational injuries exceeded $21 billion. The mean and median costs of these fatalities were $960,000 and $944,000 respectively. Total societal costs by NORA sector ranged from a high of $5.8 billion in Services to a low of $530 million in Healthcare and Social Assistance with mean costs ranging from the nearly $800,000 in Agriculture, Forestry, and Fishing to almost $1.1 million in Mining. Discussion The societal costs—total, mean, and median costs—of case and worker characteristics for occupational fatal injuries varied within each NORA sector. Impact on Industry To have the greatest societal impact, these costs can be used to target resources for public and private sector

Industry sector analysis, Mexico: Oil and gas field machinery and equipment. Export Trade Information

International Nuclear Information System (INIS)

1990-04-01

The Industry Sector Analyses (I.S.A.) for oil and gas field machinery and equipment contains statistical and narrative information on projected market demand, end-users, receptivity of Mexican consumers to U.S. products, the competitive situation - Mexican production, total import market, U.S. market position, foreign competition, and competitive factors, and market access - Mexican tariffs, non-tariff barriers, standards, taxes and distribution channels. The I.S.A. provides the United States industry with meaningful information regarding the Mexican market for oil and gas field machinery and equipment

Rethinking environmental stress from the perspective of an integrated environmental footprint: Application in the Beijing industry sector.

Science.gov (United States)

Hu, Jingru; Huang, Kai; Ridoutt, Bradley G; Yu, Yajuan; Wei, Jing

2018-05-13

Individual footprint indicators are limited in that they usually only address one specific environmental aspect. For this reason, assessments involving multiple footprint indicators are preferred. However, the interpretation of a profile of footprint indicators can be difficult as the relative importance of the different footprint results is not readily discerned by decision-makers. In this study, a time series (1997-2012) of carbon, water and land footprints was calculated for industry sectors in the Beijing region using input-output analysis. An integrated environmental footprint (IEF) was subsequently developed using normalization and entropy weighting. The results show that steep increases in environmental footprint have accompanied Beijing's rapid economic development. In 2012, the Primary Industry had the largest IEF (8.32); however, the Secondary Industry had the greatest increase over the study period, from 0.19 to 6.37. For the Primary Industry, the greatest contribution to the IEF came from the land footprint. For the Secondary and Tertiary Industries, the water footprint was most important. Using the IEF, industry sectors with low resource utilization efficiency and high greenhouse gas emissions intensity can be identified. As such, the IEF can help to inform about industry sectors which should be given priority for modernization as well as the particular footprints that require priority attention in each sector. The IEF can also be helpful in identifying industry sectors that could be encouraged to expand within the Beijing region as they are especially efficient in terms of value adding relative to IEF. Other industries, over time, may be better located in other regions that do not face the same environmental pressures as Beijing. Copyright © 2018 Elsevier B.V. All rights reserved.

Restructuring the industry sector - the impact on energy demand

International Nuclear Information System (INIS)

Constantinescu, M.

1994-01-01

The structure of the industrial sector is a factor of major importance in analyzing the evolution of energy intensity or in setting-up realistic development scenarios. A positive influence on the energy intensity value is expected for Romania from the process of restructuring the industry sector towards low energy consumption products. In order to reach this target though, suitable end comprehensive strategies have to become operational without delay, promoting energy efficiency and modern technologies at a nation-wide scale. The benefits of such strategies extend from improvement of the security of supply through environmental protection and reduction of unemployment. (Author)

Pathways to Carbon Neutral Industrial Sectors: Integrated Modelling Approach with High Level of Detail for End-use Processes

DEFF Research Database (Denmark)

Industry constitutes a substantial share of the energy and fuel consumption in energy systems. Types and patterns of usage within different industrial sectors are diverse. In this paper, we illustrate the energy and fuel use in Danish industry by 24 end-uses and 20 fuels and provide hourly profiles...... for electricity, space and process heating. The heat profiles are based on measured natural gas consumption. While seasonal patterns are predominant for space heating, process heating and electricity consumption are found to follow sector-related activities on a temporal scale. Building on this data analysis...

Energy use and CO2 emissions of China's industrial sector from a global perspective

International Nuclear Information System (INIS)

Zhou, Sheng; Kyle, G. Page; Yu, Sha; Clarke, Leon E.; Eom, Jiyong; Luckow, Patrick; Chaturvedi, Vaibhav; Zhang, Xiliang; Edmonds, James A.

2013-01-01

The industrial sector has accounted for more than 50% of China's final energy consumption in the past 30 years. Understanding the future emissions and emissions mitigation opportunities depends on proper characterization of the present-day industrial energy use, as well as industrial demand drivers and technological opportunities in the future. Traditionally, however, integrated assessment research has handled the industrial sector of China in a highly aggregate form. In this study, we develop a technologically detailed, service-oriented representation of 11 industrial subsectors in China, and analyze a suite of scenarios of future industrial demand growth. We find that, due to anticipated saturation of China's per-capita demands of basic industrial goods, industrial energy demand and CO 2 emissions approach a plateau between 2030 and 2040, then decrease gradually. Still, without emissions mitigation policies, the industrial sector remains heavily reliant on coal, and therefore emissions-intensive. With carbon prices, we observe some degree of industrial sector electrification, deployment of CCS at large industrial point sources of CO 2 emissions at low carbon prices, an increase in the share of CHP systems at industrial facilities. These technological responses amount to reductions of industrial emissions (including indirect emission from electricity) are of 24% in 2050 and 66% in 2095. - Highlights: • Eleven industrial subsectors in China are detail analyzed from a global perspective. • Industrial energy use and CO 2 emissions will approach a plateau between 2030 and 2040. • Industrial CHP and CCS are truly encouraged by carbon tax. • Some degree of industrial sector electrification are observed by carbon tax

Technique of calculating specific capital investments in the fuel extracting sectors of industry

Energy Technology Data Exchange (ETDEWEB)

Bugrov, V.A.; Filey, I.A.

1980-01-01

An analysis is made of the existing methods of calculating specific capital investments in the fuel extracting sectors of industry. Their shortcomings are shown. It is suggested that specific capital investments for extraction of coal and gas be defined as the ratio of capital investments to the conditional increase in extraction. Coal extraction should take int consideration all the capital investments associated with the input of new facilities, and the maintenance of the attained level of extraction and reconstruction of the enterprise, as well as all the newly introduced facilities both at the new and at the active enterprises associated with an increase in coal extraction and with maintenance of the facilities. The suggested technique completely corresponds to the ''Standard Technique for Developing a Technical-Industrial-Financial Plan,'' which stipulates determination of specific capital investments per unit of introduced facilities with only the difference that it takes into consideration the specific features of the fuel extracting sectors of industry.

Decomposition of Productivity Considering Multi-environmental Pollutants in Chinese Industrial Sector

OpenAIRE

Fujii, Hidemichi; Cao, Jing; Managi, Shunsuke

2015-01-01

The objective of this study is to calculate and decompose productivity incorporating multi-environmental pollutants in Chinese industrial sectors from 1992 to 2008. We apply a weighted Russell directional distance model to calculate productivity from both the economic and environmental performance. The main findings are: (1) Chinese industrial sectors increased productivity, with the main contributing factors being labor saving prior to 2000; (2) The main contributing factors for productivity...

Industrial Strategy and the Regions : the shortcomings of a narrow sectoral focus

OpenAIRE

Fothergill, Stephen; Gore, Tony; Wells, Peter

2017-01-01

Key points\\ud  - The new money that the UK government has allocated to support its industrial strategy is targeted at R&D in an exceptionally narrow range of sectors – healthcare & medicine, robotics & artificial intelligence, batteries, self-driving vehicles, materials for the future and satellites & space technology.\\ud  - Even on a generous definition of the industries that might benefit from the new Industrial Strategy Challenge Fund, these sectors account for little more than 1 per cen...

Energy and exergy analyses of energy consumptions in the industrial sector in South Africa

International Nuclear Information System (INIS)

Oladiran, M.T.; Meyer, J.P.

2007-01-01

The energy-utilization over a 10-year period (1994-2003) has been analysed for the South African industrial sector, which consumes more primary energy than any other sector of the economy. Four principal sub-sectors, namely iron and steel, chemical and petrochemical, mining and quarrying, and non-ferrous metals/non-metallic minerals were considered in this study. Primary-energy utilization data were used to calculate the weighted mean energy and exergy efficiencies for the sub-sectors and then overall values for the industrial sector were obtained. The results indicate that exergy efficiency is considerably lower than energy efficiency in all the sub-sectors, particularly in mining and quarrying processes, for which the values were approximately 83% and 16%, respectively. The performance of exergy utilization in the industrial sector can be improved by introducing various conservation strategies. Results from this study were compared with those for other countries

Performance Analysis of Indonesia’s Mining Sector Price Index

Directory of Open Access Journals (Sweden)

Hastra Reza Satyatama

2017-07-01

Full Text Available Subprime mortage’s crisis in United States 2008 giving effect to the global capital markets especially the stock price index of the mining sector Indonesia. This research analyzes the effect of BI Rate, exchange rate, world gold price, crude oil price, and Dow Jones Industrial Average on the stock price index of the mining sector. This research employs time series monthly data of 2009-2016 with Error Correction Model-Engle Granger (ECM-EG as the method. The analysis showed that the BI rate, exchange rate and world gold price, has a negative and significant effect. World oil prices affect positively but not significant meanwhile the Dow Jones Industrial Average has a positive and significant impact on the stock price index of the mining sector. For investors in the mining sector, should pay attention to the exchange rate of the rupiah and Dow Jones Index significantly in the mining sector of the stock price index.DOI: 10.15408/sjie.v6i2.5395 

Predictive management of jobs and abilities in the industry and energy sectors within a green economy context. Synthesis

International Nuclear Information System (INIS)

2011-01-01

Within the frame of the Emission Trading Scheme (ETS), the authors study job evolutions considered globally, not only those concerning sectors which will provide 'green jobs', but also those where job destructions may occur because of the implementation of the Grenelle de l'Environnement. They propose a qualitative rather than quantitative analysis of consequences, and typological approaches of the vulnerability of some worker categories with respect to retraining possibilities. For each sector whether it is submitted to the ETS system (electricity production, gas transport, urban heating, steel metallurgy, refining, paper industry, cement industry, building materials, chemical industry) or not (automotive industry, motorization, phyto-sanitary products, renewable energies, electromechanical industry), they analyse actor strategies, propose a diagnostic and draw some perspectives

Trends in the Food and Beverage Sector of the Hospitality Industry

OpenAIRE

Melia, Detta

2011-01-01

The hospitality sector in Ireland represents an important part of the tourism industry and comprises hotels, restaurants, pubs and clubs, guesthouses and self-catering operations. The largest component within the Irish hospitality sector is hotels. In addition to hotels, food and beverage operations comprise a significant proportion of the industry. These businesses operate in a highly competitive environment as a consequence of a number of factors. First, there is a downturn in the global an...

Energy savings potential in China's industrial sector: From the perspectives of factor price distortion and allocative inefficiency

International Nuclear Information System (INIS)

Ouyang, Xiaoling; Sun, Chuanwang

2015-01-01

China's industrial energy consumption accounted for 70.82% of national and 14.12% of world energy usage in 2011. In the context of energy scarcity and environmental pollution, the industrial sector in China faces unsustainable growth problems. By adopting the stochastic frontier analysis (SFA) framework, this paper analyzes the factor allocative efficiency of China's industrial sector, and estimates the energy savings potential from the perspective of allocative inefficiency. This paper focuses on three issues. The first is examining the factor allocative inefficiency of China's industrial sector. The second is measuring factor price distortion by the shadow price model. The third is estimating the energy savings potential in China's industrial sector during 2001–2009. Major conclusions are thus drawn. First, factor prices of capital, labor and energy are distorted in China due to government regulations. Moreover, energy price is relatively low compared to capital price, while is relatively high compared to labor price. Second, the industry-wide energy savings potential resulted from energy allocative inefficiency was about 9.71% during 2001–2009. The downward trend of energy savings potential implies the increasing energy allocative efficiency in China's industrial sector. Third, a transparent and reasonable pricing mechanism is conducive to improving energy allocative efficiency. - Highlights: • We measure energy savings potential resulted from allocative inefficiency in China's industrial sector. • Allocative inefficiency is explained based on the theoretical and empirical models. • Factor prices of capital, labor and energy are distorted because of government regulations. • Energy pricing reform is conducive to improving energy allocative efficiency

LMDI Decomposition Analysis of Energy Consumption in the Korean Manufacturing Sector

Directory of Open Access Journals (Sweden)

Suyi Kim

2017-02-01

Full Text Available The energy consumption of Korea’s manufacturing sector has sharply increased over the past 20 years. This paper decomposes the factors influencing energy consumption in this sector using the logarithmic mean Divisia index (LMDI method and analyzes the specific characteristics of energy consumption from 1991 to 2011. The analysis reveals that the activity effect played a major role in increasing energy consumption. While the structure and intensity effects contributed to the reduction in energy consumption, the structure effect was greater than the intensity effect. Over the periods, the effects moved in opposite directions; that is, the structure effect decreased when the intensity effect increased and vice versa. The energy consumption by each industry is decomposed into two factors, activity and intensity effects. The increase of energy consumption due to the activity effect is largest in the petroleum and chemical industry, followed by the primary metal and non-ferrous industry, and the fabricated metal industry. The decrease of energy consumption due to the intensity effect is largest in the fabricated metal industry, followed by the primary metal and non-ferrous industry, and the non-metallic industry. The energy consumption due to intensity effect in the petroleum and chemical industry has risen. To save energy consumption more efficiently for addressing climate change in this sector, industrial restructuring and industry-specific energy saving policies should be introduced.

Market capitalization of the trucking industry sector, 2005

Science.gov (United States)

2006-08-01

This report focuses on the market valuation of the overall trucking industry sector and each segment within it. In the past, while the focus has been on stock price appreciation or depreciation, this report emphasizes market capitalization returns. S...

Impact of Blockchain Technology Platform in Changing the Financial Sector and Other Industries

Directory of Open Access Journals (Sweden)

Dusko Knezevic

2018-03-01

Full Text Available The aim of the paper is to conduct a research on an impact of blockchain technology platform on the financial sector through cryptocurrency, and an impact on other industries.. The subject of research is not only this technology but also its commercial exploitation. In order to understand the platform, the starting point of this research is an analysis of how the technology functions, after that the advantages for business and economic transaction are identified, and finally the paper deals with an impact of new technology on business, above all on financial operations. The basic hypothesis is that blockchain has achieved a great impact on financial sector, also it has the potential to radically change only the financial sector but also the way we buy and sell, our interaction with the authorities as a way of verifying the ownership from the authorship and the organic food production. Using the available data and synthesis of knowledge from the fields of technology, economics, finance, and politics, 4 scenarios were set up for the future of underlying technology. The scenario approach combined with trend analysis in order to prove the starting hypothesis with high reliability. The research results show that the technology being investigated already has a profound impact on the financial sector, that it is in the initial phase of changing many industries, with the likelihood that they will change them significantly in the next five to ten years. Businesses increasingly discover the power of this technology to exploit the benefits of the Fourth Technological Revolution.

Towards the creation of an industrial sector dedicated to nuclear dismantling

International Nuclear Information System (INIS)

Anon.

2015-01-01

In next decades the business of nuclear dismantling is expected to grow exponentially due to the decommissioning of nuclear facilities that will have reached the end of their operating life. Dismantling has 2 main features: dismantling operations on a same site can span decades and dismantling is a new activity in which innovations are likely to appear and may benefit other sectors. In France regional authorities have promoted public-private partnerships in order to make working together small enterprises very specialized in sectors like robotic, laser cutting, waste processing, remote operations... with public laboratories dedicated to nuclear research, and with graduate schools to include dismantling in curriculum and with major industrial operators of the nuclear industry. The aim is the creation of jobs and the building of an industrial sector able to win market shares in the worldwide business of nuclear dismantling. (A.C.)

Is the societal burden of fatal occupational injury different among NORA industry sectors?

Science.gov (United States)

Biddle, Elyce Anne

2013-02-01

Since the implementation of the Occupational Safety and Health Act, safety and health in the work environment has seen marked improvement. Although these improvements are laudable, workplace hazards continue to plague the American worker. Understanding the economic burden of fatalities by industry sector is important to setting broad occupational safety and health research priorities. Cost estimates provide additional information about how fatal injuries affect society and hence can improve injury prevention program planning, policy analysis, evaluation, and advocacy. This study estimated the total, mean, and median societal costs by worker and case characteristic in 2003-2006 for the industry sectors identified in the National Institute for Occupational Safety and Health National Occupational Research Agenda (NORA). Analyses were conducted with restricted access to the Bureau of Labor Statistics Census of Fatal Occupational Injuries data. These data exclude military personnel, decedents with unknown age or sex, and fatalities occurring in New York City. Societal costs were estimated using the cost-of-illness approach, which combines direct and indirect costs to yield an overall cost of an fatal occupational injury. During this period, the cost of the 22,197 fatal occupational injuries exceeded $21 billion. The mean and median costs of these fatalities were $960,000 and $944,000 respectively. Total societal costs by NORA sector ranged from a high of $5.8 billion in Services to a low of $530 million in Healthcare and Social Assistance with mean costs ranging from the nearly $800,000 in Agriculture, Forestry, and Fishing to almost $1.1 million in Mining. The societal costs-total, mean, and median costs-of case and worker characteristics for occupational fatal injuries varied within each NORA sector. To have the greatest societal impact, these costs can be used to target resources for public and private sector research by industry. Published by Elsevier Ltd.

Reducing Carbon Dioxide Emissions from the EU Power and Industry Sectors. An assessment of key technologies and measures

Energy Technology Data Exchange (ETDEWEB)

Rootzen, Johan

2012-11-01

In February 2011, the European Council reconfirmed the goal of reducing EU greenhouse gas emissions by at least 80 % by 2050, as compared to the levels in 1990. The power and industrial sectors currently account for almost half of the total GHG emissions in the EU. The overall objective of the work presented in this thesis is to provide a technology-based perspective on the feasibility of significant reductions in CO{sub 2} emissions in the EU power and industrial sectors, with the emphasis on expected turnover in the capital stock of the existing infrastructure. Three sectors of industry are included: petroleum refining; iron and steel production; and cement manufacturing. The analysis is based on a thorough description and characterization of the current industry infrastructure and of the key mitigation technologies and measures in each sector. The analysis comprises investigations of how specific factors, such as the age structure of the capital stock, technology and fuel mix, and spatial distribution of the plant stock, contribute to facilitating or hindering the shift towards less-emission-intensive production processes. The results presented here are the synthesis of the results described in the following three papers: Paper I investigates the potential for CCS in industrial applications in the EU by considering branch- and plant-specific conditions; Paper II assesses strategies for CO{sub 2} abatement in the European petroleum refining industry; and Paper III explores in a scenario analysis the limits for CO{sub 2} emission abatement within current production processes in the power and industrial sectors. Together, the three papers provide a comprehensive assessment of the roles of technologies and measures that are commercially available today, as well as those of emerging technologies that are still in their early phases of development. The results presented in Paper III show that the EU goal for emissions reductions in the sectors covered by the EU ETS, i

Renewable and recovery energies for each industry sector

International Nuclear Information System (INIS)

Petitot, Pauline

2018-01-01

The French agency of environment and energy management (Ademe) has made available to the industrialists, a study about the proper choice of renewable and recovery energies capable to meet the energy and heat needs of their facilities. This article summarises in a table, sector by sector and for each renewable and recovery energy source, the capability of this energy source to supply part or the overall energy needs of some elementary industrial processes. Indication is given about the capability of an energy source to produce electricity as well

Incorporating Workplace Injury to Measure the Safety Performance of Industrial Sectors in Taiwan

Directory of Open Access Journals (Sweden)

Li-Ting Yeh

2017-12-01

Full Text Available The severity of workplace injuries varies by industry. Information on workplace injuries can enable firms and governments to effectively improve their safety performance based on the specific contexts of each industry. Incorporating the three workplace injury rates (being wounded or ill, disability, and death, a data envelopment analysis (DEA model is developed to evaluate the safety performance of 17 industrial sectors in Taiwan. The results suggest that the Taiwanese government should pay particular attention to the mining and quarrying industry, which has the lowest safety performance. Additionally, the results provide abundant information for the Taiwanese government to design industry safety regulations in a way that may prompt firms to develop a sustainable economy by improving their health and safety practices and enhancing their overall safety performance.

Empirical analysis of industrial operations in Montenegro

Directory of Open Access Journals (Sweden)

Galić Jelena

2012-12-01

Full Text Available Since the starting process of transition, industrial production in Montenegro has been faced with serious problems and its share in GDP is constantly decreasing. Global financial crises had in large extent negatively influenced industry. Analysis of financial indicators showed that industry had significant losses, problem of undercapitalisation and liquidity problems. If we look by industry sectors, than situation is more favourable in the production of electricity, gas and water compared to extracting industry and mining. In paper is proposed measures of economic policy in order to improve situation in industry.

Energy economy and industrial ecology in the Brazilian cement sector

International Nuclear Information System (INIS)

Tavares, Marina Elisabete Espinho; Schaeffer, Roberto

1999-01-01

The article discusses the following issues of the Brazilian cement sector: the Brazilian cement main types specification, cement quantities evolution produced in Brazil from 1987 to 1997, energy conservation in the cement production process with additives, energy economy cost estimates from the utilization of additives, and several technologies energy economy cost used in the industrial sector

Energy consumption analysis of Spanish food and drink, textile, chemical and non-metallic mineral products sectors

International Nuclear Information System (INIS)

Aranda-Usón, Alfonso; Ferreira, Germán; Mainar-Toledo, M.D.; Scarpellini, Sabina; Llera Sastresa, Eva

2012-01-01

This paper provides quantitative information for energy consumption from four different industry sectors based on an energy analysis obtained by means of in-situ energy audits and complementary information. The latter information was taken from Saving Strategy and Energy Efficiency in Spain (Estrategia de Ahorro y Eficiencia Energética en España 2004–2010, E4) documents and the 2009 Industrial Survey of Spain from the National Statistics Institute (Instituto Nacional de Estadística, INE). The results show an estimate of energy consumption for each sector, namely Spanish food, drink and tobacco (9.6%), textile (4.5%), chemical (14.7%), and non-metallic mineral products (24.3%), as well as the degree of inefficiency for each, obtained by means of a stochastic frontier production function model. These results are combined with the energy consumption analysis to identify potential energy saving opportunities around 20.0% of the total energy consumption for all studied sectors. These energy saving opportunities are classified according to thermal or electrical energy consumption and percentage savings of the total energy consumption. -- Highlights: ► This study presents the analysis of four Spanish energy-consuming industrial sectors. ► The four selected sectors account for 33.0% of the total industrial SMEs. ► An audit was carried out in several factories from each analysed industrial sector. ► Stochastic Cobb-Douglas frontiers were used to estimate production frontiers. ► Potential energy saving opportunities around 20.0% of the total energy consumption.

Furniture Industry in Kenya : Situational Analysis and Strategy

OpenAIRE

Creapo Oy; World Bank Group

2015-01-01

The Government of Kenya recognizes that the performance of the furniture sector is crucial both to employment and growth in the country. The Ministry of Industrialization and Enterprise Development (MOIED) therefore requested an analysis of both the furniture and timber sectors, in order to understand their current state of development, their main constraints, and the interventions necessa...

Analysis of inter-country input-output table based on bibliographic coupling network: How industrial sectors on the GVC compete for production resources

Science.gov (United States)

Guan, Jun; Xu, Xiaoyu; Xing, Lizhi

2018-03-01

The input-output table is comprehensive and detailed in describing national economic systems with abundance of economic relationships depicting information of supply and demand among industrial sectors. This paper focuses on how to quantify the degree of competition on the global value chain (GVC) from the perspective of econophysics. Global Industrial Strongest Relevant Network models are established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output (ICIO) tables and then have them transformed into Global Industrial Resource Competition Network models to analyze the competitive relationships based on bibliographic coupling approach. Three indicators well suited for the weighted and undirected networks with self-loops are introduced here, including unit weight for competitive power, disparity in the weight for competitive amplitude and weighted clustering coefficient for competitive intensity. Finally, these models and indicators were further applied empirically to analyze the function of industrial sectors on the basis of the latest World Input-Output Database (WIOD) in order to reveal inter-sector competitive status during the economic globalization.

Industrial Sector Energy Efficiency Modeling (ISEEM) Framework Documentation

Energy Technology Data Exchange (ETDEWEB)

Karali, Nihan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Xu, Tengfang [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sathaye, Jayant [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-12-12

The goal of this study is to develop a new bottom-up industry sector energy-modeling framework with an agenda of addressing least cost regional and global carbon reduction strategies, improving the capabilities and limitations of the existing models that allows trading across regions and countries as an alternative.

Sectoral approaches establishment for climate change mitigation in Thailand upstream oil and gas industry

International Nuclear Information System (INIS)

Chaiyapa, Warathida; Esteban, Miguel; Kameyama, Yasuko

2016-01-01

Understanding the upstream oil and gas (O&G) industry's responses to climate change and what factors can be influential to trigger their mitigation strategies is crucial for policy-makers to harness the huge resources that this industry can mobilize towards environmental protection. Considering that individual climate change efforts are unlikely to affect global mitigation paths, the study investigates the possibility that sectoral approaches can help in the reduction of greenhouse gas emissions, using Thailand as a case study. It conducted online questionnaire surveys and semi-structured interviews to acquire primary data from companies and key informants from the government, NGOs, NPOs and academics. The results suggested that, among three possible groups of factors that could affect company decisions on whether to promote sectoral approaches, domestic politics (particularly the Thai government) is the most important, though other factors also play important and interrelated roles. The most welcomed type of scheme that could be envisaged would appear to be a sectoral agreement between government and industry. Finally, the authors provide two main policy recommendations, namely the establishment of an industrial association of O&G companies and for it to target how to start looking at measures to reduce greenhouse gas emissions amongst large companies in the sector. - Highlights: •Examining the possibility of establishing a sectoral approach Thailand's upstream O&G industry. •Analytical framework was constructed to ascertain most influential factors. •Questionnaires and interviews were employed with companies, government, NGOs and academic. •Domestic politics is the most determining factor, but other factors have strong interrelation. •Sectoral agreement between government and industry is the most likely scheme to be established.

Analysis of the Industry Potential in Republic of Moldova

Directory of Open Access Journals (Sweden)

Larisa BUGAIAN

2010-12-01

Full Text Available This article identifies several competitive sectors of the economy that have potential to lead to sustainable economic growth for Republic of Moldova. Sectors were chosen for analysis combining quantitative and qualitative methods. A pool of sectors was selected based on export and sales performance over the last eight years. The final decision of the top sectors was based on the qualitative factors such as prevalence of the SMEs in the sector, gender makeup of the workforce and the regional presence, as well as employment levels and sales growth. The results of analysis showed that following industrial sectors: wine; textiles and apparel; information and communication technology; footwear; construction materials and furniture have the most potential for contributing to transformational growth in the Republic of Moldova economy.

Generation and Use of Thermal Energy in the U.S. Industrial Sector and Opportunities to Reduce its Carbon Emissions

Energy Technology Data Exchange (ETDEWEB)

McMillan, Colin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); McKellar, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sabharwall, Piyush [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ruth, Mark [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bragg-Sitton, Shannon [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-12-01

This report quantifies greenhouse gas (GHG) emissions from the industrial sector and identifies opportunities for non-GHG-emitting thermal energy sources to replace the most significant GHG-emitting U.S. industries based on targeted, process-level analysis of industrial heat requirements. The intent is to provide a basis for projecting opportunities for clean energy use. This provides a prospectus for small modular nuclear reactors (including nuclear-renewable hybrid energy systems), solar industrial process heat, and geothermal energy. This report provides a complement to analysis of process-efficiency improvement by considering how clean energy delivery and use by industry could reduce GHG emissions.

ANALYSIS OF LABOR MARKET IN THE SECONDARY SECTOR ON ROMANIAN DEVELOPMENT REGIONS

Directory of Open Access Journals (Sweden)

Cristina\tALPOPI

2015-12-01

Full Text Available In this paper we analyze and highlight the evolution of workforce engaged in the secondary sector. We determined too the unemployment rate distribution, which is coupled with the decline of industry and constructions and there are identified zones and cities affected by major rising unemployment. The increase of unemployed number in the secondary sector was primarily due to the decline of manufacturing industry and mining. At Bucharest and growth poles level, it shows that between the secondary sector branches: industry and construction, the most employees are engaged in the industrial sector, especially in manufacturing industries, although this sector ranks on the second place in order of preference. Most of the employees choose jobs into the tertiary sector. Regarding the distribution of the number of employees per industrial subsectors, it appears that most of them work in manufacturing, followed water supply and waste, then energy supply and a very small percentage in the mining. The activity sectors reveal that most employees are engaged in secondary and tertiary sectors, and then, in a very small proportion, in the primary sector. At regional poles level, the largest number of employees are engaged in industrial sector. In the construction sector, the number of employees is small. Counties associated of Bucharest metropolitan area recorded the greatest number of employees in construction. All analyzed territories recorded positive evolutions in the number of employees in 2011 compared to 2002. Counties associated of some metropolitan areas, including Bucharest, showed a positive trend, superior to other types of areas in 2011 compared to 2002. Compared to the situation in construction sector, the industry is characterized by a decrease of the number of employees in 2011 compared to 2002. Even in a general context characterized by instability in the industry, some types of analyzed areas showed a rising trend. In 2011, compared to 2006

The Appropriateness of Trade Liberalization in the Industrial Sector of the Russian Federation

OpenAIRE

Ilyasova, Tatiana

2003-01-01

This article seeks to investigate the appropriateness of implementation of trade liberalization in Russia by analyzing the current performance of the Russian industrial sector and evaluating its nominal and effective protection levels. The estimation of the effective level of protection is performed through the calculation of effective rates of protection for each industrial sector. Effective rates of protection are estimated with the simple Corden Method to examine the difference in protecti...

FDI technology spillover and threshold effect of the technology gap: regional differences in the Chinese industrial sector.

Science.gov (United States)

Wang, Hui; Liu, Huifang; Cao, Zhiyong; Wang, Bowen

2016-01-01

This paper presents a new perspective that there is a double-threshold effect in terms of the technology gap existing in the foreign direct investment (FDI) technology spillover process in different regional Chinese industrial sectors. In this paper, a double-threshold regression model was established to examine the relation between the threshold effect of the technology gap and technology spillover. Based on the provincial panel data of Chinese industrial sectors from 2000 to 2011, the empirical results reveal that there are two threshold values, which are 1.254 and 2.163, in terms of the technology gap in the industrial sector in eastern China. There are also two threshold values in both the central and western industrial sector, which are 1.516, 2.694 and 1.635, 2.714, respectively. The technology spillover is a decreasing function of the technology gap in both the eastern and western industrial sectors, but a concave curve function of the technology gap is in the central industrial sectors. Furthermore, the FDI technology spillover has increased gradually in recent years. Based on the empirical results, suggestions were proposed to elucidate the introduction of the FDI and the improvement in the industrial added value in different regions of China.

Assessment of annual whole-body occupational radiation exposure in education, research and industrial sectors in Ghana (2000-09)

International Nuclear Information System (INIS)

Hasford, F.; Owusu-banahene, J.; Otoo, F.; Adu, S.; Sosu, E. K.; Amoako, J. K.; Darko, E. O.; Emi-reynolds, G.; Nani, E. K.; Boadu, M.; Arwui, C. C.; Yeboah, J.

2008-01-01

Institutions in the education, research and industrial sectors in Ghana are quite few in comparison to the medical sector. Occupational exposure to radiation in the education, research and industrial sectors in Ghana have been analysed for a 10 y period between 2000 and 2009, by extracting dose data from the database of the Radiation Protection Inst. (Ghana)) Atomic Energy Commission. Thirty-four institutions belonging to the three sectors were monitored out of which ∼65 % were in the industrial sector. During the 10 y study period, monitored institutions ranged from 18 to 23 while the exposed workers ranged from 246 to 156 between 2000 and 2009. Annual collective doses received by all the exposed workers reduced by a factor of 2 between 2000 and 2009. This is seen as a reduction in annual collective doses in education/research and industrial sectors by ∼39 and ∼62 %, respectively, for the 10 y period. Highest and least annual collective doses of 182.0 man mSv and 68.5 man mSv were all recorded in the industrial sector in 2000 and 2009, respectively. Annual average values for dose per institution and dose per exposed worker decreased by 49 and 42.9 %, respectively, between 2000 and 2009. Average dose per exposed worker for the 10 y period was least in the industrial sector and highest in the education/research sector with values 0.6 and 3.7 mSv, respectively. The mean of the ratio of annual occupationally exposed worker (OEW) doses for the industrial sector to the annual OEW doses for the education/research sector was 0.67, a suggestion that radiation protection practices are better in the industrial sector than they are in the education/research sector. Range of institutional average effective doses within the education/research and industrial sectors were 0.059-6.029, and 0.110-2.945 mSv, respectively. An average dose per all three sectors of 11.87 mSv and an average dose per exposed worker of 1.12 mSv were realised for the entire study period. The entire

Energy use efficiency in the Indian manufacturing sector: An interstate analysis

International Nuclear Information System (INIS)

Mukherjee, Kankana

2008-01-01

This paper approaches the measurement of energy efficiency from a production theoretic framework and uses Data Envelopment Analysis to measure energy efficiency in the Indian manufacturing sector. Using data from the Annual Survey of Industries for the years 1998-99 through 2003-04, the study compares the energy efficiency in manufacturing across states, based on several models. The results show considerable variation in energy efficiency across states. Comparing the results across our models, we find that the relative pricing of energy does not provide the appropriate incentives for energy conservation. A second-stage regression analysis reveals that states with a larger share of manufacturing output in energy-intensive industries have lower energy efficiency. Also, higher quality labor force associates with higher energy efficiency. Finally, the power sector reforms have not yet had any significant impact on achieving energy efficiency

Internal marketing and organisational performance of SMEs in the EDV industrial sector

Directory of Open Access Journals (Sweden)

Sousa João Pedro

2018-03-01

Full Text Available Focusing on the industrial sector, this research aims to identify conditions for the implementation of internal marketing concepts among employees and its impact on the organisational performance. Only one study was found simultaneously integrating the two constructs. It concerned the cork processing industry alone, yet considered expanding the efforts – namely, using qualitative exploratory research in the form of 10 in-depth interviews based on a script of generally open questions – to the entire industry in the Portuguese region between rivers Douro and Vouga. The unit of analysis was constructed considering distinct features as well as activity criteria and the geographic location, thus ensuring the necessary heterogeneity. The results inform about the awareness of the internal marketing conceptualisation. The research found that all analysed enterprises had more or less structured model frames and worked with the conceptualisation of the guidance for the internal market, a strategic concern, and in some instances, this concept was an organisational desideratum in the sector. In addition to the lapse of the research according to a qualitative paradigm of exploratory nature, the main limitation is the need for objective sustainably of the results obtained through future quantitative studies to promote an integrated triangulation of their outcomes. The research allowed identifying the companies that use organisational models conducive to the individual well-being of employees and facilitating the desired orientation to the market.

Examining the Feasibilities of Industry 4.0 for the Hospitality Sector with the Lens of Management Practice

OpenAIRE

Shamim, S.; Cang, Shuang; Yu, H.N.A.; Liu, Y.

2017-01-01

Industry 4.0 and its impact in the manufacturing sector are well documented. However, the service sector is understudied, and it is also facing the challenges of mass customization, digital enhancement, smart work environment, and efficient supply chain. The aim of this study is to fill this research gap by exploring the issues of Industry 4.0 in the service sector, with cases in the hospitality industry. All the challenges of Industry 4.0 require continuous innovation and learning, which is ...

An assessment of investment projects in terms of gas and oil sectors of Ukraine’s and Russia’s industry

Directory of Open Access Journals (Sweden)

Iryna Dzebykh

2010-12-01

Full Text Available This article considers the assessment of investment projects with the usage of characteristic examples, taken from gas and oil sectors of the industries, which are of crucial importance for the economies of Ukraine and Russia. These branches of industry are characterized by insufficient definition and complicacy, which necessitates the financial analysis of these sectors in Ukraine and Russia, especially if it is made for the assessment of the investment projects. In the long-term investment budget planning of the company the financial analysis is carried out to determine the investment possibilities, the value of which for the company is more than the money necessary for the ensurance of such possibilities. A few proposed methods can help specialist-analysts to take right decisions concerning investments.

A strategic review of the petroleum refinery industry sector

International Nuclear Information System (INIS)

1999-10-01

The report studies the environmental performance of the U.K. petroleum refinery industry sector with reference to world-wide best practice and describes the five most practical strategic options for emission reduction in the context of projected technology, cost, demand, capacity and legislation. (author)

Environmental management in sugar-energy sector: a comparative analysis

Directory of Open Access Journals (Sweden)

Andréia Marize Rodrigues

2014-11-01

Full Text Available With the rise of the environmental variable in the business environment, companies started to give greater attention to strategies and practices focused on the rational use of natural resources and minimize the environmental impacts of their business operations. Many productive sectors stood out in the reflections on production and the environment, as is the case of the sugar energy industry, which constitutes a sector with a highly demanding industrial activity of natural resources, whether as sources of inputs as depositories of waste production. Thus, the aim of this paper is a comparative analysis of environmental practices of two sugar energy plants, both from the point of view of their operational strategy and regarding the suitability of the disposal of waste generated by the industrial area. It was concluded that, although many practices adopted by businesses are analogous, one of the studied plants have distinctive environmental performance, because of the increased attention given to the implementation of environmental practices and especially the inclusion of the environmental variable in their strategies.

STRUCTURAL ANALYSIS OF MERGERS AND ACQUISITIONS IN THE FOOD INDUSTRY

OpenAIRE

Adams, Wendi L.; Love, H. Alan; Capps, Oral, Jr.

1997-01-01

Determinants of merger and acquisition activity in the food industry are analyzed using logit regression analysis. Factors affecting the food processing, food retailing and food service sectors are considered. Results indicate merger and acquisition activity in all three sectors are significantly influenced by antitrust activity, profitability and real gross domestic product.

Organizational Culture in the Financial Sector: Evidence from a Cross-Industry Analysis of Employee Personal Values and Career

OpenAIRE

van Hoorn, Andre

2015-01-01

We assess the organizational culture in the finance industry in relation to the global financial crisis (GFC) and consider the potential of cultural change to improve the financial sector. To avoid (response) biases, we build on the person-organization (P-O) fit literature and develop a novel, indirect method for assessing organizational culture that revolves around relationships between employees’ personal traits and their career success in the industry or organization under study. We analyz...

Importancia actual de la oleoquímica en el sector industrial de tensioactivos

Directory of Open Access Journals (Sweden)

Gómez Herrera, Carlos

2009-09-01

Full Text Available Oleochemistry is an industrial sector with various applications and important developments in the field of surfactans. In this article different parts are dedicated to: A Sources of oleochemical raw materials; B Valorization of the oleochemistry in the field of surfactants; C Hydrophilic heads based on carbohydrates or proteins, D Examples of surfactants currently prepared at industrial scale, such as esters of polyols, alkylpolyglucosides, glucamides and lipoaminoacids. Collaboration between industrial sectors of surfactants and oleaginous products has evidenced various strong points. Ecological, energetic, economical and sanitary reasons will probably increase this collaboration in the future.La oleoquímica es un sector industrial con aplicaciones múltiples e importantes desarrollos en el campo de los tensioactivos. En el presente artículo se dedican apartados a: A fuentes de materias primas oleoquímicas, B valorización de la oleoquímica en el campo de los tensioactivos, C partes hidrófilas de los tensioactivos basadas en carbohidratos o en proteínas, D ejemplos de biotensioactivos actualmente preparados a escala industrial, tales como ésteres de polioles, alquilpoliglucósidos, glucamidas, ésteres de sacarosa y lipoaminoácidos. La colaboración entre los sectores industriales de tensioactivos y de productos oleaginosos ha puesto en evidencia numerosos puntos fuertes. Muy probablemente, razones energéticas, económicas, ecológicas y sanitarias harán que esta colaboración se incremente en el futuro.

Comparative Advantage, Exchange Rates, and Sectoral Trade Balances of Major Industrial Countries

OpenAIRE

Stephen S. Golub

1994-01-01

This paper uses a Ricardian framework to clarify the role of microeconomic and macroeconomic factors governing the time-series and cross-sectional behavior of sectoral trade balances. Unit labor costs and trade balances are calculated for several sectors for the seven major industrial countries. The time-series and cross-sectional variation in sectoral unit labor costs is decomposed into relative productivity, wage differentials, and exchange rate variations. The main findings are that change...

Reconversión industrial, gran empresa y efectos territoriales: El caso del sector automotriz en México

Directory of Open Access Journals (Sweden)

José Antonio Vieyra Medrano

2000-05-01

Full Text Available El proceso de reconversión industrial que se desarrolla en México manifiesta un impacto diferencial, al incorporar sólo ciertos territorios y determinados sectores económicos a la "nueva lógica de producción global". Esto hace que los patrones territoriales, imperantes hasta los años setenta, se vean modificados. El estudio parte del análisis de la industria manufacturera y reconoce a las empresas de gran tamaño como las de mayor capacidad para asumir dicha reestructuración. Finalmente, se estudia al sector automotriz, asumiéndolo como uno de los más importantes dentro del fenómeno de la globalización, ya que liga realidades nacionales y regionales con el actual funcionamiento de una economía mundial.In Mexico it is developing a process of rationalization of industry. It is expressed by a diferential impact, since it incorporates only some regions and certain economic sectors to the "new global production logic". This makes changes in the land patterns prevailing until the 1970 decade. The analysis leaves from manufacturing industry, identifying the big firms as the more qualified to assume that reestructuration. At last, the automobile sector is studied taking it as a more important ones into globalization phenomenon. So, it links national and regional realities with the actual world economy function.

Valor económico agregado en las empresas del sector industrial manufacturero de Cúcuta periodo 2008-2012

Directory of Open Access Journals (Sweden)

Jhon Antuny Pabón-León

2015-07-01

Full Text Available Background: The manufacturing industry in Cúcuta is considered important because of the relevance of this sector of the economy either due to demand for products and services, employment generation and economic impact on different other economic activities on the city. Objective: This paper makes part of a research on value creation in the manufacturing sector of Cúcuta Colombia Norte de Santander Department in 2008-2012. It is intended to describe the behavior of this indicator in the sector. Methods: The study was developed with a quantitative approach; the scope of the research was descriptive with a non- experimental design. For this, a trend analysis of financial indicators related to value creation based on accounting information was made. Results: This research found that no value is created in the sector or in any of the subsectors studied during five years; this is due to the decrease in operating income and rising inventories coupled with the fact that cost of capital is high compared to the performance of equity. Conclusions: There is low industrial vocation in the city, less contribution of the sector on the GDP year after year, hence regional economy has been affected in both social and economic indicators.

Brazilian industrial growth financing: are the sources adequate to the sectoral technological regimes?

Directory of Open Access Journals (Sweden)

Flávio de Oliveira Gonçalves

2010-07-01

Full Text Available This work aims to analyzing the relationship between the type of financing resources and growth of the manufacturing sectors, grouped according to technological regimes, and to relate this relationship to its degree of adequacy of the sources to the sectoral technological opportunities. Thus, panel data analysis was performed in order to asses the relationship between financial deepening and innovation. We gathered detailed data for each industrial sector, grouped according to its technological regimes, and ran a Granger causality test in panels. Results found report that more innovation-intense sectors, which boosted aggregated economic growth rather steeply, present inadequate financing dynamic to its own growth. Therefore, considering sectors with high technological opportunities and strong innovation persistence, it was observed a bank-based type of financing, whilst the ideal for its growth would be the market-based one. On the other hand, less innovative sectors are found in better situation of financing and better growth conditions. These (non-satisfactory requirements present themselves in (higher lower growth rates and industrial production share.O objetivo do trabalho é analisar a relação entre o tipo de financiamento e o crescimento dos diversos setores da indústria de transformação e ligá-la ao maior ou menor grau de adequação das fontes às oportunidades tecnológicas setoriais. Para tanto, faz-se uma avaliação em painel de dados da relação entre aprofundamento financeiro e inovação, utilizando dados desagregados para os setores industriais, agrupados de acordo com regimes tecnológicos, fazendo um exercício de Granger-causalidade em painéis. Os resultados encontrados mostram que os setores mais inovativos, que impulsionariam o crescimento da economia agregada de forma mais acentuada, apresentam dinâmicas de financiamento inadequadas ao seu crescimento. Assim, para setores com altas oportunidades tecnológicas e

Examining the sectoral energy use in Turkish economy (1980-2000) with the help of decomposition analysis

International Nuclear Information System (INIS)

Ediger, Volkan S.; Huvaz, Ozkan

2006-01-01

This paper aims to investigate the sectoral energy use in the Turkish economy for the 1980-2000 period when significant changes occurred in the economic and demographic structure of the country. These changes had several impacts on the energy use in the primary sectors such as agriculture, industry and services. Decomposition analysis is conducted on these sectors by using the additive version of the LMDI method due to its advantages over others. Although a close relationship exists between primary energy consumption and GDP, analyses show that significant variations occurred in the sectoral energy use during the 1982, 1988-1989, 1994 and 1998-2000 periods. Such variations are related to the economic policies of the governments. The Turkish economy has undergone a transformation from agricultural to industrial enhanced by rapid urbanization, especially after 1982. However, industrialization has not been completed yet, and the energy demand should be increasing faster than national income until the energy intensity of the country reaches a peak. This study is performed on three basic sectors; however, decomposition into secondary and tertiary sectors will provide detailed information for further investigations

COMPARATIVE ANALYSIS BETWEEN THE INDUSTRIAL AND SERVICE SECTORS: A LITERATURE REVIEW OF THE IMPROVEMENTS OBTAINED THROUGH THE APPLICATION OF LEAN SIX SIGMA

Directory of Open Access Journals (Sweden)

Ana Carolina Martins Rosa

2018-03-01

Full Text Available The present work is a review of literature, to identify the improvements acquired from the application of the Lean Six Sigma methodology in the industrial and service sectors in different countries. The PRISMA methodology was used to select relevant articles to the topic of work, and the bibliographic databases used for the research were the Google Scholar, SciELO, ScienceDirect, Taylor & Francis and Web of Science. The study counted on 27 articles to better exemplify these points, being 11 focused on the industrial sector and 16 on the services sector. It was evident that in both sectors the variability of the process and its waste were reduced, by eliminating non-value-added activities, improving process quality, productivity, efficiency, the service provided, increasing customer satisfaction, reducing costs and generating savings. It has been found that Lean Six Sigma is a versatile tool that can be adapted and applied in any segment, allowing potential opportunities for new research and applications.

Evaluation of Virtual Water Trade by the Industrial Sector of Zanjan Province

Directory of Open Access Journals (Sweden)

Morteza Tahami Pourzarandi

2017-07-01

Full Text Available Water crisis is of utmost importance due to the growing demand and consumption of water, especially in developing countries where its production and food security are facing serious challenges. Virtual water trade has been proposed as one strategy to combat the water scarcity crisis in arid and semi-arid regions. The strategy is based on the import of food and water-intensive supplies from neighboring regions that enjoy adequate supplies of water. Given the fact that the industrial sector has been proposed to serve as the basis of development in Zanjan Province, the present study was conducted to investigate the virtual water trade by the industrial sector in this province. For the purposes of this study, data from the statistical period 2010-2011 were obtained from the Statistical Center of Iran on enterprises employing ten member staffs or above. The data were used to categorize the industries surveyed, their water demands, and products to estimate the quantities of water needed for their continued operation. It was found that the highest quantities of virtual water in Zanjan are allocated to coking and petroleum plants, paper and cellulosic industries, and food and beverage processing factories with average values of 32.70, 26.14, and 11.63 cubic meters per million Rials, respectively. In addition, the total amount of virtual water exported from the industrial units operating in Zanjan Province is estimated at about 3.10 MCM, 50% of which belongs to base metal production. Conclusion: Our findings show that the industrial sector in Zanjan Province is a net exporter of virtual water.

Climate change issue table : petroleum downstream sector industry foundation paper

International Nuclear Information System (INIS)

Crandall, G.R.; Kelly, S.J.; Kromm, R.B.; Prime, M.G.

1999-01-01

An analysis of the impact of the Kyoto Protocol on the Canadian downstream petroleum industry is presented. The downstream sector includes petroleum refining, plus all activities regarding distribution, marketing and retailing of petroleum products. In 1990, the carbon dioxide (CO 2 ) emissions resulting from the production and consumption of petroleum products were about 207 megatons which is about 45 per cent of total Canadian CO 2 emissions. This report includes the analysis of the Base Case and the Kyoto Case. The Base Case is premised on the implementation of fuel sulphur reductions to meet cleaner fuels requirements and an enhanced program of refinery efficiency initiatives. Under the Base Case assumptions the CO 2 emissions from refinery operations in 2010 would be about 3.4 below 1990 levels. The Kyoto Case was developed on the basis of reductions in Canadian petroleum product demand that would be sufficient to achieve a 6 per cent reduction in GHG emissions from the production and consumption of petroleum products relative to 1990 levels. The model demonstrates the dramatic economic impact of the Kyoto Case reductions on the Canadian downstream petroleum sector. Investment requirements for capital improvements to further distillate production and to further desulphurization are estimated at $ 1.5 billion between 2005 and 2015. The reduced volume of gasoline sales would be expected to result in rationalization of retail outlets, resulting in the closure of some 2,000 retail outlets with a combined loss of about 12,000 jobs. It is suggested that similar impact in other countries that are signatory to the Kyoto Protocol could result in the shift of refining, refining industry jobs and related economic benefits to countries which are not participants in the Kyoto Protocol. 14 tabs., 6 figs., 5 appendices

Evaluación de la Concentración Industrial Sinérgica: Propuesta Metodológica y Aplicada a un Sector Industrial

Directory of Open Access Journals (Sweden)

María del Val Segarra Oña

2013-01-01

Full Text Available La importancia de la concentración geográfica y la evidenciade la existencia de clusters industriales ha sido temade muchos estudios a través de los años. En este artículo,presentamos una herramienta para analizar la concentraciónindustrial sinérgica, entendida como la generación de ventajasproducto de la actividad en grupo (en este caso de un sectorindustrial, las cuales resultan superiores a la suma de losefectos individuales. Esta herramienta se aplica a un sectorconcreto, el del mueble de hogar de la Comunidad Valenciana,en España, en el que se identifican los factores exógenosque contribuyen a reforzar la competitividad del sector através de la creación de las sinergias producto de la actividaden grupo. La metodología seguida en la investigación ha sidoel estudio de casos.   ABSTRACT The importance of geographical concentration and theevidence of the existence of industrial clusters have beenwidely studied through the years. In this article, we presentan analysis tool of a synergistic industrial concentration (fora particular industrial sector that is superior to the sum ofits individual effects. This tool is specifically applied to thehome furniture sector in the Region of Valencia in Spain, inwhich the exogenous factors contributing to reinforce thesector’s competitiveness through synergy created by groupaction are identified. The methodology followed was thecase study type.

Forecasting global developments in the basic chemical industry for environmental policy analysis

NARCIS (Netherlands)

Broeren, M.L.M.|info:eu-repo/dai/nl/371687438; Saygin, D.; Patel, M.K.

The chemical sector is the largest industrial energy user, but detailed analysis of its energy use developments lags behind other energy-intensive sectors. A cost-driven forecasting model for basic chemicals production is developed, accounting for regional production costs, demand growth and stock

CO_2 emissions and energy intensity reduction allocation over provincial industrial sectors in China

International Nuclear Information System (INIS)

Wu, Jie; Zhu, Qingyuan; Liang, Liang

2016-01-01

Highlights: • DEA is used to evaluate the energy and environmental efficiency of 30 provincial industrial sector in China. • A new DEA-based model is proposed to allocate the CO_2 emissions and energy intensity reduction targets. • The context-dependent DEA is used to characterize the production plans. - Abstract: High energy consumption by the industry of developing countries has led to the problems of increasing emission of greenhouse gases (GHG) (primarily CO_2) and worsening energy shortages. To address these problems, many mitigation measures have been utilized. One major measure is to mandate fixed reductions of GHG emission and energy consumption. Therefore, it is important for each developing country to disaggregate their national reduction targets into targets for various geographical parts of the country. In this paper, we propose a DEA-based approach to allocate China’s national CO_2 emissions and energy intensity reduction targets over Chinese provincial industrial sectors. We firstly evaluate the energy and environmental efficiency of Chinese industry considering energy consumption and GHG emissions. Then, considering the necessity of mitigating GHG emission and energy consumption, we develop a context-dependent DEA technique which can better characterize the changeable production with reductions of CO_2 emission and energy intensity, to help allocate the national reduction targets over provincial industrial sectors. Our empirical study of 30 Chinese regions for the period 2005–2010 shows that the industry of China had poor energy and environmental efficiency. Considering three major geographical areas, eastern China’s industrial sector had the highest efficiency scores while in this aspect central and western China were similar to each other at a lower level. Our study shows that the most effective allocation of the national reduction target requires most of the 30 regional industrial to reduce CO_2 emission and energy intensity, while a

The Mauritius stock exchange: Sectoral analysis, risk and return ...

African Journals Online (AJOL)

Companies listed on the Mauritius Stock Exchange are classified into seven sectors of the economy, namely Banking & Insurance, Industry, Investments, Sugar, Commerce, Leisure & Hotels and Transport. Significant improvements in market capitalisation and turnover are noted in all sectors except the Transport sector.

Annual electricity consumption forecasting by neural network in high energy consuming industrial sectors

International Nuclear Information System (INIS)

Azadeh, A.; Ghaderi, S.F.; Sohrabkhani, S.

2008-01-01

This paper presents an artificial neural network (ANN) approach for annual electricity consumption in high energy consumption industrial sectors. Chemicals, basic metals and non-metal minerals industries are defined as high energy consuming industries. It is claimed that, due to high fluctuations of energy consumption in high energy consumption industries, conventional regression models do not forecast energy consumption correctly and precisely. Although ANNs have been typically used to forecast short term consumptions, this paper shows that it is a more precise approach to forecast annual consumption in such industries. Furthermore, the ANN approach based on a supervised multi-layer perceptron (MLP) is used to show it can estimate the annual consumption with less error. Actual data from high energy consuming (intensive) industries in Iran from 1979 to 2003 is used to illustrate the applicability of the ANN approach. This study shows the advantage of the ANN approach through analysis of variance (ANOVA). Furthermore, the ANN forecast is compared with actual data and the conventional regression model through ANOVA to show its superiority. This is the first study to present an algorithm based on the ANN and ANOVA for forecasting long term electricity consumption in high energy consuming industries

Public Interest Energy Research (PIER) Program. Final Project Report. California Energy Balance Update and Decomposition Analysis for the Industry and Building Sectors

Energy Technology Data Exchange (ETDEWEB)

de la Rue du Can, Stephane [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sathaye, Jayant [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2010-12-01

This report on the California Energy Balance version 2 (CALEB v2) database documents the latest update and improvements to CALEB version 1 (CALEB v1) and provides a complete picture of how energy is supplied and consumed in the State of California. The CALEB research team at Lawrence Berkeley National Laboratory (LBNL) performed the research and analysis described in this report. CALEB manages highly disaggregated data on energy supply, transformation, and end-use consumption for about 40 different energy commodities, from 1990 to 2008. This report describes in detail California's energy use from supply through end-use consumption as well as the data sources used. The report also analyzes trends in energy demand for the "Manufacturing" and "Building" sectors. Decomposition analysis of energy consumption combined with measures of the activity driving that consumption quantifies the effects of factors that shape energy consumption trends. The study finds that a decrease in energy intensity has had a very significant impact on reducing energy demand over the past 20 years. The largest impact can be observed in the industry sector where energy demand would have had increased by 358 trillion British thermal units (TBtu) if subsectoral energy intensities had remained at 1997 levels. Instead, energy demand actually decreased by 70 TBtu. In the "Building" sector, combined results from the "Service" and "Residential" subsectors suggest that energy demand would have increased by 264 TBtu (121 TBtu in the "Services" sector and 143 TBtu in the "Residential" sector) during the same period, 1997 to 2008. However, energy demand increased at a lesser rate, by only 162 TBtu (92 TBtu in the "Services" sector and 70 TBtu in the "Residential" sector). These energy intensity reductions can be indicative of energyefficiency improvements during the past 10 years. The research presented in this report provides a basis for developing an energy-efficiency performance index to measure

Screening of Industrial Development Policies, Plans and Programs of Strategic Environmental Assessment in the Industrial Sector of Iran

OpenAIRE

J. Nouri; B. Maghsoudlou Kamali

2005-01-01

The present investigation deals with the quality of capacity building and institutional strengthening of Strategic Environmental Assessment (SEA) in the industrial sector as well as determining the environmental strategies for industrial sustainable development in Iran. The leading aim of this paper has been to systematize the environmental considerations in industrial development strategies, policies, plans and programs in the highest strategic decision making processes and to ensure environ...

Identifying and Mitigating the Impact of the Budget Control Act on High Risk Sectors and Tiers of the Defense Industrial Base: Assessment Approach to Industrial Base Risks

Science.gov (United States)

2016-04-30

Ü~åÖÉ= - 351 - products, similar to those found in a bill of material. Figure 3 provides an example of the relationship between sectors , sub- sectors ...defense aircraft. Defense aircraft are divided in three main sub- sectors : fixed-wing, rotary wing, and unmanned systems. The fixed-wing sub- sector ...Risk Sectors and Tiers of the Defense Industrial Base: Assessment Approach to Industrial Base Risks Lirio Avilés, Engineer, MIBP, OUSD(AT&L) Sally

Exploring the Relationship between Human Capital Investment and Corporate Financial Performance of Jordanian Industrial Sectors

Directory of Open Access Journals (Sweden)

Faris Nasif ALSHUBIRI

2013-12-01

Full Text Available The revolution of globalization, computerization and information technology has entered to Jordanian market. This phenomenon requires company's attention of human element and the acquired knowledge, experience and the development of the so-called concept of intellectual capital.(IC In this study I used only the human capital as a part of IC. This study aims to exploring the relationship between human capital investment (HCI, and corporate financial performance. This study used an 11 industrial sectors listed of Amman Stock Exchange from 2005to 2011. Correlation analysis tests used in this study and the results indicate the high positive significant relationship between HCI and corporate financial performance related to, ROE , PTBV , log of sales , log of assets , DPS and ICR but no significant relationship between HCI and WCTO. The researcher recommends industrial companies to strengthen and stimulate the concept of human capital in the companies and the need for develop administrative innovation program. For future analysis may be used more sectors listed in market in addition used the all parts of intellectual capital related to structural and physical capital with corporate financial performance.

Evaluation of Efficiency Activities in the Industrial Sector Undertaken in Response to Greenhouse Gas Emission Reduction Targets

Energy Technology Data Exchange (ETDEWEB)

Price, Lynn; de la Rue du Can, Stephane; Lu, Hongyou; Horvath, Arpad

2010-05-21

The 2006 California Global Warming Solutions Act calls for reducing greenhouse gas (GHG) emissions to 1990 levels by 2020. Meeting this target will require action from all sectors of the California economy, including industry. The industrial sector consumes 25% of the energy used and emits 28% of the carbon dioxide (CO{sub 2}) produced in the state. Many countries around the world have national-level GHG reduction or energy-efficiency targets, and comprehensive programs focused on implementation of energy efficiency and GHG emissions mitigation measures in the industrial sector are essential for achieving their goals. A combination of targets and industry-focused supporting programs has led to significant investments in energy efficiency as well as reductions in GHG emissions within the industrial sectors in these countries. This project has identified program and policies that have effectively targeted the industrial sector in other countries to achieve real energy and CO{sub 2} savings. Programs in Ireland, France, The Netherlands, Denmark, and the UK were chosen for detailed review. Based on the international experience documented in this report, it is recommended that companies in California's industrial sector be engaged in a program to provide them with support to meet the requirements of AB32, The Global Warming Solution Act. As shown in this review, structured programs that engage industry, require members to evaluate their potential efficiency measures, plan how to meet efficiency or emissions reduction goals, and provide support in achieving the goals, can be quite effective at assisting companies to achieve energy efficiency levels beyond those that can be expected to be achieved autonomously.

Chances for the development of manufactures of capital goods. Analysis of the situation and sector evolution; Oportunidades para el desarrollo de los fabricantes de bienes de equipo. Analisis de la situacion y evolucion del sector

Energy Technology Data Exchange (ETDEWEB)

Pelaez Ramos, M. L.

2012-07-01

The main purpose of this paper is to analyze the situation and development in the capital goods sector in Spain. This industry is not just an important sector in the Spanish economy but, given its structural characteristics (dynamism, influence on the production processes of other activities and presence in all developed countries), it conditions the recovery of our economy. The article includes an analysis of the weaknesses, threats, strengths and opportunities of the sector. Further, it is crucial its contribution to make sustainable development of industrial activity. Also, it deals with those opportunities that are presented for the future development of this industry such as eco-design, energy efficiency and life cycle analysis. (Author)

Evolution of industrial sector electricity demand in Costa Rica

International Nuclear Information System (INIS)

Fischer, Steven C.

2005-01-01

This note is a preliminary investigation into the relationship between the efficiency of electricity utilization in the Costa Rican industrial sector and the competitive pressures generated by the implementation of economic reforms, in particular, the progressive liberalization of international trade, in the years since the debt and economic crisis of the early 1980s. The steady, year-by-year, reduction in the rate of import tariff protection, with only temporary interruptions and reverses, has been the most consistently implemented component of the macroeconomic, trade, and financial sector reforms upon which this country has embarked over the past two decades. The note sheds some light on the nature of the general policy environment that is conductive to an efficient utilization of energy in the productive sectors and to the success of national energy efficiency promotion programs in this and other parts of the world. (Author)

Curriculum Development Based On INQF and Business/Industries Sector for Improvement Competency of Basic Pattern Making Students at Vocational High School

Science.gov (United States)

Nilasari, Yoni; Dasining

2018-04-01

In this era of globalization, every human resource is faced with a competitive climate that will have a major impact on the development of the business and industrial sector. Therefore it is deemed necessary to research the development of curriculum based on INQF and the business/industries sector in order to improve the competence of Sewing Technique for Vocational High School Students of fashion clothing program. The development of curricula based on INQF and the business/industries is an activity to produce a curriculum that suits the needs of the business and industries sector. The formulation of the problem in this research are: (1) what is the curriculum based on INQF and the business/industries sector?; (2) how is the process and procedure of curriculum development of fashion program profession based on INQF and the business/industries sector?; And (3) how the result of the curriculum of fashion expertise based on INQF and the business/industries sector. The aims of research are: (1) explain what is meant by curriculum based on INQF and business/industries sector; (2) to know the process and procedure of curriculum development of fashion program profession based on INQF and the business/industries sectors ; And (3) to know result the curriculum of clothing expertise based on INQF and the business/industries sector. The research method chosen in developing curriculum based on INQFand business/industry sector is using by 4-D model from Thiagarajan, which includes: (1) define; (2) design; (3) development; And (4) disseminate. Step 4, not done but in this study. The result of the research shows that: (1) the curriculum based on INQF and the business/industries sector is the curriculum created by applying the principles and procedures of the Indonesian National Qualification Framework (INQF) that will improve the quality of graduates of Vocational High School level 2, and establish cooperation with Business/industries as a guest teacher (counselor) in the

MODEL OF ANALYSIS IN THE ROMANIAN FOOTWEAR INDUSTRY

OpenAIRE

Dimi OFILEANU

2014-01-01

The aim of this work is to determine the influence that exports of footwear industry have on the turnover of the sector. In the work, a period of 9 years is taken into consideration: from 2004 to 2012, establishing an econometric model of analysis of the connection between the turnover and direct exports of footwear industry in Romania. Based on the analyzed empirical data, the work answers to the following question: what is the influence that exports of footwear industry have on sector’s tur...

Regulatory reforms and productivity: An empirical analysis of the Japanese electricity industry

International Nuclear Information System (INIS)

Nakano, Makiko; Managi, Shunsuke

2008-01-01

The Japanese electricity industry has experienced regulatory reforms since the mid-1990s. This article measures productivity in Japan's steam power-generation sector and examines the effect of reforms on the productivity of this industry over the period 1978-2003. We estimate the Luenberger productivity indicator, which is a generalization of the commonly used Malmquist productivity index, using a data envelopment analysis approach. Factors associated with productivity change are investigated through dynamic generalized method of moments (GMM) estimation of panel data. Our empirical analysis shows that the regulatory reforms have contributed to productivity growth in the steam power-generation sector in Japan

ISO 9001 - Certificates by industrial sector in the world as a key decision variable

Directory of Open Access Journals (Sweden)

Katarzyna Hys

2015-12-01

Full Text Available The aim of this article is to present and analyse trends in the scope of the implementation of quality certificates compliant with the ISO 9001 standard. The analysis will concern the trend in the sectoral approach all over the world. The preparation of data, their analysis and drawing conclusions have been made on the basis of the desk research method. The data was gathered by means of an analysis of source materials such as, among others: announcements, press releases, reports for industries, publicly available reports of companies and research institutions, information from the Internet.The main conclusion is the fact that the number of certificates compliant with the ISO 9001 standard is constantly growing in the world. The kind of business activity determines the engagement in the certificate implementation. The subject of research provided conclusions and at the same time, became an inspiration for defining research issues such as the ex-post analysis of the information available, drawing conclusions and drawing up directions of development. The retrospective analysis in the scope of the sectoral analysis of ISO 9001 trends, drawing conclusions and drawing up evolution directions is the author’s original contribution.

Automation and control trends in the upstream sector of the oil industry

Energy Technology Data Exchange (ETDEWEB)

Plucenio, Agustinho; Pagano, Daniel J. [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil). Programa de Recursos Humanos da ANP em Automacao, Controle e Instrumentacao para a Industria do Petroleo e Gas, PRH-34

2004-07-01

The need to continuously improve the aspects of Health, Safety and Environment to operators, installation's security, optimization of oil reservoir recovery in wells operating with different artificial lift methods, subject to different secondary recovery techniques, has motivated the development of technologies in the automation and control for the upstream sector of the oil industry. While the application of control and automation techniques is well established in the downstream sector of the oil industry that is not the case in the downstream sector. One tendency in this sector is the utilization of control via Field bus Networks. This technology uses equipment that communicate with each other in a two wire digital network and can be programmed to execute function blocks algorithms designed to perform a designed control strategy. The most noticeable benefits are the improvements in the process performance and the equipment reusability and interoperability. Proprietary solutions can be replaced by systems composed of equipment supplied by different manufacturers connected in the same network. These equipment operate according to a strategy designed by automation and control engineers under the supervision of professionals working in computer terminals located in different company departments. Other gains are a better understanding about the industry processes, application of optimization techniques, fault detection, equipment maintenance follow-up, and improved operators working conditions and workers qualification. Other tendencies are: permanent well monitoring. Either with installation of down hole sensors based on fiber grating sensors or surface sensors using embedded electronic processors. Developments of instrumentation technology for low cost multiphase flow measurements. Application of control techniques for flow regime control and optimization of reservoir recovery through better identification, optimization and Model Based Predictive Control

Multi-sectoral decomposition in decoupling industrial growth from carbon emissions in the developed Jiangsu Province, China

International Nuclear Information System (INIS)

Lu, Qinli; Yang, Hong; Huang, Xianjin; Chuai, Xiaowei; Wu, Changyan

2015-01-01

ICE (Industrial carbon emission) is one of most important sources of anthropogenic carbon emissions. To reduce the carbon emissions, many countries, particularly China, have adjusted their industrial structures and improved energy efficiency. The complete decomposition technique and decoupling method were used to investigate and quantitatively analyze the main factors influencing the energy-related ICE in Jiangsu, the Chinese province with the largest energy consumption and carbon emissions. The importance of the sectoral dimension was taken into account by dividing the industry into three main departments consisting of 38 sub-sectors. The results indicated that the industry of Jiangsu was in a weak decoupling state from 2005 to 2012. The industrial output growth was the biggest driver of the increase in ICE, while energy efficiency advancement was the main cause for the reduction, in a weakening trend. The year of 2008 was an important breaking point when the optimization of industry structure came into play and global financial crisis took place. The biggest dilemma in Jiangsu is heavy industry is still dominant, especially the five sectors of them made the biggest contribution (88.2%) to ICE. Thankfully, there were five manufacturing industries had achieved low carbon economy at various degrees. - Highlights: • Multi-sectoral decomposition and decoupling were conducted to evaluate the ICE. • The industry of Jiangsu was in a weak decoupling state with an increasing trend. • The industrial output growth was the biggest driver for ICE from 2005 to 2012. • The optimization of industry structure came into play for the reduction since 2008. • Five backward and advanced industries were identified

Analysis of Defense Industry Consolidation Effects on Program Acquisition Costs

National Research Council Canada - National Science Library

Hoff, Russell V

2007-01-01

.... This thesis examines whether cost changes are evident following consolidation within the defense industry by conducting a regression analysis of Major Defense Acquisition Programs across 13 broad defense market sectors...

Analysis of energy use in building services of the industrial sector in California: A literature review and a preliminary characterization

Energy Technology Data Exchange (ETDEWEB)

Akbari, H.; Borgers, T.; Gadgil, A.; Sezgen, O.

1991-04-01

Energy use patterns in many of California's fastest-growing industries are not typical of those in the mix of industries elsewhere in the US. Many California firms operate small and medium-sized facilities, often in buildings used simultaneously or interchangeably for commercial (office, retail, warehouse) and industrial activities. In these industrial subsectors, the energy required for building services'' to provide occupant comfort and necessities (lighting, HVAC, office equipment, computers, etc.) may be at least as important as the more familiar process energy requirements -- especially for electricity and on-peak demand. In this report, published or unpublished information on energy use for building services in the industrial sector have been compiled and analyzed. Seven different sources of information and data relevant to California have been identified. Most of these are studies and/or projects sponsored by the Department of Energy, the California Energy Commission, and local utilities. The objectives of these studies were diverse: most focused on industrial energy use in general, and, in one case, the objective was to analyze energy use in commercial buildings. Only one of these studies focused directly on non-process energy use in industrial buildings. Our analysis of Northern California data for five selected industries shows that the contribution of total electricity consumption for lighting ranges from 9.5% in frozen fruits to 29.1% in instruments; for air-conditioning, it ranges from nonexistent in frozen fruits to 35% in instrument manufacturing. None of the five industries selected had significant electrical space heating. Gas space heating ranges from 5% in motor vehicles facilities to more than 58% in the instrument manufacturing industry. 15 refs., 15 figs., 9 tabs.

Techno-economic evaluation of commercial cogeneration plants for small and medium size companies in the Italian industrial and service sector

International Nuclear Information System (INIS)

Armanasco, Fabio; Colombo, Luigi Pietro Maria; Lucchini, Andrea; Rossetti, Andrea

2012-01-01

The liberalization of the electricity market and the concern for energy efficiency have resulted in a surge of interest in cogeneration and distributed power generation. In this regard, companies are encouraged to evaluate the opportunity to build their own cogeneration plant. In Italy, the majority of such companies belong to the industrial or service sector; it is small or medium in size and the electric power ranges between 1 ÷ 10 MW. Commercially available gas turbines are the less expensive option for cogeneration. Particular attention has been given to the possibility of combining an organic Rankine cycle (ORC) with gas turbine, to improve the conversion efficiency. Companies have to account for both technical and economical aspects to assess viability of cogeneration. A techno-economic analysis was performed to identify, in the Italian energy market, which users can take advantage of a cogeneration plant aimed to cover at least part of their energy demand. Since electricity and thermal needs change considerably in the same sector, single product categories have been considered in the analysis. Our work shows that in the industrial sector, independent of the product category, cogeneration is a viable option form a techno-economic perspective. - Highlights: ► The best technologies for 1 ÷ 10 MW distributed generation plant are gas turbine and ORC. ► A variety of commercial cogeneration plants is available to meet user needs. ► Cogeneration is a technical and economical advantage for industrial sector companies.

INMETRO products analysis program: impact on quality of the brazilian industry

Directory of Open Access Journals (Sweden)

Marcos André Borges

2008-07-01

Full Text Available The main objective is to proceed a detailed analysis of the Products Analysis Program of Inmetro, evaluating its contribution to the suppliers of products and services. The relevance of this program - a governmental initiative financed with public resources that relates several sectors of the society – as a factor of incentive to the competitiveness of the national industry, can be evidenced by the research of the impact generated by this activity, translated in improvement actions to the analyzed products and services that aim at the correction of eventual non-conformity to the criteria set in standards and technical regulations related to health and safety. Several sectors in industry have been benefited with the creation or revision of standards, implementation of industry quality programs, voluntary or mandatory conformity assessment programs, and others. The consequences include, beyond the protection of the consumers, the increase of national industry competitiveness and domestic market strength, and the warranty of loyal competition between the suppliers. Key-words: Product Analysis, Quality, Inmetro.

Evaluating the Impact of Conservatism in Industrial Fatigue Analysis of Life-Limited Components

Directory of Open Access Journals (Sweden)

Hoole Joshua

2018-01-01

Full Text Available This paper presents a review of the conservatism approaches applied by different industrial sectors to the stress-life (S-N analysis of ‘life-limited’ or ‘safe-life’ components. A comparison of the fatigue design standards for 6 industrial sectors identified that the conservatism approaches are highly inconsistent when comparing the areas of variability and uncertainty accounted for along with the conservatism magnitude and method of application. Through the use of a case-study based on the SAE keyhole benchmark and 4340 steel S-N data, the industrial sector which introduces the greatest reduction of a component life-limit was identified as the nuclear sector. The results of the case-study also highlighted that conservatism applied to account for scatter in S-N data currently provides the greatest contribution to the reduction of component life-limits.

The Garment Industry Development Corporation: A Case Study of a Sectoral Employment Development Approach. Sectoral Employment Development Learning Project Case Studies Series.

Science.gov (United States)

Conway, Maureen

The Garment Industry Development Corporation (GIDC) was founded in 1984 by a 3-member partnership that included the local union, industry associations, and local government. GIDC's goal was to support New York City's garment industry, which had been steadily losing jobs. GIDC exhibits the following characteristics of sectoral initiatives: it…

Diverging business strategies towards climate change : a USA-Europe comparison for four sectors of industry

NARCIS (Netherlands)

Woerd, van der K.F.; Wit, de C.M.; Kolk, A.; Levy, D.L.; Vellinga, P.; Behlyarova, E.

2004-01-01

The research project has investigated what strategies specific sectors of industry develop to limit greenhouse gas emissions. In an USA-Europe co-operation, researchers have analysed emerging climate strategies in the oil industry, the automobile industry, the chemical industry and the bank and

A Sectoral Approach to Training in the Printing Industry and the Hospital Sector. Synthesis Report of a Study in Five European Countries. CEDEFOP Panorama.

Science.gov (United States)

Warmerdam, John

The development of sectoral training systems in two economic sectors--the printing industry and the sector of health care in hospitals--was examined in a study that entailed parallel research projects in five European countries: Belgium, Latvia, The Netherlands, Norway, and the United Kingdom. The study was based on the assumption that the…

Trade brokerage property of industrial sectors on the global value chain

Science.gov (United States)

Xing, Lizhi; Xu, Xiaoyu; Guan, Jun; Dong, Xianlei

2017-08-01

ICIO data have proven itself to be a reliable source for the analysis of economic globalization, with which sectors all over the world could be constructed into a sophisticated GVC, bringing the advantages of simultaneous study on international and domestic economies in detail as a holistic network. This paper uses OECD-WTO TiVA data to set up GIVCN-TiVA networks as the general analytical framework, depicting the transferring process of intermediate goods among sectors of various countries/regions. Secondly, the conception of brokerage roles in SNA has been adopted to redefine sector’s function while linkage exists between its upstream providers and downstream consumers, referred to as “Trade Brokerage Property”, as well as to quantify the ratio of each types of the roles. Thirdly, a set of simulations have been defined to testify the contribution that different TBPs incur to the robustness of global economic system. Finally, analyses on TBPs and NTBPs have been carried out in the levels of industry and country/region, respectively.

Building a comprehensive mill-level database for the Industrial Sectors Integrated Solutions (ISIS) model of the U.S. pulp and paper sector.

Science.gov (United States)

Modak, Nabanita; Spence, Kelley; Sood, Saloni; Rosati, Jacky Ann

2015-01-01

Air emissions from the U.S. pulp and paper sector have been federally regulated since 1978; however, regulations are periodically reviewed and revised to improve efficiency and effectiveness of existing emission standards. The Industrial Sectors Integrated Solutions (ISIS) model for the pulp and paper sector is currently under development at the U.S. Environmental Protection Agency (EPA), and can be utilized to facilitate multi-pollutant, sector-based analyses that are performed in conjunction with regulatory development. The model utilizes a multi-sector, multi-product dynamic linear modeling framework that evaluates the economic impact of emission reduction strategies for multiple air pollutants. The ISIS model considers facility-level economic, environmental, and technical parameters, as well as sector-level market data, to estimate the impacts of environmental regulations on the pulp and paper industry. Specifically, the model can be used to estimate U.S. and global market impacts of new or more stringent air regulations, such as impacts on product price, exports and imports, market demands, capital investment, and mill closures. One major challenge to developing a representative model is the need for an extensive amount of data. This article discusses the collection and processing of data for use in the model, as well as the methods used for building the ISIS pulp and paper database that facilitates the required analyses to support the air quality management of the pulp and paper sector.

The European Insurance Industry: A PEST Analysis

Directory of Open Access Journals (Sweden)

Charmaine Barbara

2017-05-01

Full Text Available The insurance industry plays an important role for European economic stability and the threats and opportunities it faces should be carefully determined. In this paper we highlight the main challenges by using a Political, Economic, Social and Technological (PEST analysis. This work applies conventional actuarial thought on this area by focusing strictly on the European sector.

The South African wildlife ranching sector: A Social Accounting Matrix Leontief multiplier analysis

Directory of Open Access Journals (Sweden)

Philippus C. Cloete

2014-10-01

Research purpose: The purpose of this article is to put into context the relative economic contribution of the wildlife ranching sector, as opposed to other land-use options in South Africa. Motivation for the study: Growth in the wildlife ranching sector at the cost of other traditional farming practices resulted in disagreements amongst various role players about the impact thereof on the national economy. The controversy can most probably be explained by different beliefs, coupled with the lack of a proper understanding and quantification of the wildlife ranching sector’s contribution toward the economy. Research methodology: The study employed a Social Accounting Matrix-based Leontief multiplier analysis for South Africa. Main findings: Results from the multiplier analysis revealed that developments within the wildlife ranching sector are likely to make a relatively more superior contribution towards the economy, especially when compared to similar land-use options such as extensive livestock production. Practical/managerial implications: It has been acknowledged by both academia and private sector that a major need exists for more research on the South African wildlife ranching industry, specifically looking at issues such as the industries, economic and social contributions, potentials and constraints. The research, therefore, contributes toward the depth of economic information and research regarding the South African wildlife sector. Contribution/value added: The research provides valuable information in dealing with the ‘popular belief’, especially amongst some of South Africa’s decision makers, namely, that growth in the wildlife ranching sector is not or does not have the ability to contribute significantly toward economic and socioeconomic factors.

Organizational culture in the financial sector : evidence from a cross-industry analysis of employee personal values and career success

NARCIS (Netherlands)

van Hoorn, André

2017-01-01

We assess the organizational culture in the finance industry in relation to the global financial crisis (GFC) and consider the potential of cultural change to improve the financial sector. To avoid (response) biases, we build on the person-organization (P-O) fit literature and develop a novel,

Regional water coefficients for U.S. industrial sectors

OpenAIRE

Riccardo Boero; Donatella Pasqualini

2017-01-01

Designing policies for water systems management requires the capability to assess the economic impacts of water availability and to effectively couple water withdrawals by human activities with natural hydrologic dynamics. At the core of any scientific approach to these issues there is the estimation of water withdrawals by industrial sectors in the form of water coefficients, which are measurements of the quantity of water withdrawn per dollar of GDP or output. In this work we focus on the c...

Input-output analysis in fertilizers sector. A case study of Turkey

International Nuclear Information System (INIS)

Karkacier, O.; Guelse, H.S.; Sayili, M.; Akca, H.

1999-01-01

The types of structural analysis in the input-output model known are forward and backwards ties. Fertilizer sector is tied forwardly agriculture, agri-business, chemistry, petro-chemistry and glass sector. In addition, it tied backwardly mining, chemistry, petro-chemistry, electricity, gas, water and transportation. The effect of backward tie of fertilizer sector is more important than its effect of the forward ties. In this study, by means of the year of 1979, 1985 and 1990 input-output table of Turkey the own situation of fertilizer industry and the production relation with other sectors of the economy have been tired to explain with forward and backwards ties. According to the result of the research it was determined that in 1990, (u j ) input coefficient of fertilizer sector is 69 %. That is, 69 percent of the product of fertilizer sector was used as an intermediate goods by other sectors. Therefore, 31 percent of goods produced by fertilizer sector was consumed as a final good. In addition, in this year, (w i ) intermediate use coefficient of fertilizer sector is 52 %. (w i ) intermediate use coefficient of fertilizer sector decreased from 1973 to 1990, as a result of this final use coefficient (1-w i ) increased. Refs. 5 (author)

Occupational safety of different industrial sectors in Khartoum State, Sudan. Part 1: Safety performance evaluation.

Science.gov (United States)

Zaki, Gehan R; El-Marakby, Fadia A; H Deign El-Nor, Yasser; Nofal, Faten H; Zakaria, Adel M

2012-12-01

Safety performance evaluation enables decision makers improve safety acts. In Sudan, accident records, statistics, and safety performance were not evaluated before maintenance of accident records became mandatory in 2005. This study aimed at evaluating and comparing safety performance by accident records among different cities and industrial sectors in Khartoum state, Sudan, during the period from 2005 to 2007. This was a retrospective study, the sample in which represented all industrial enterprises in Khartoum state employing 50 workers or more. All industrial accident records of the Ministry of Manpower and Health and those of different enterprises during the period from 2005 to 2007 were reviewed. The safety performance indicators used within this study were the frequency-severity index (FSI) and fatal and disabling accident frequency rates (DAFR). In Khartoum city, the FSI [0.10 (0.17)] was lower than that in Bahari [0.11 (0.21)] and Omdurman [0.84 (0.34)]. It was the maximum in the chemical sector [0.33 (0.64)] and minimum in the metallurgic sector [0.09 (0.19)]. The highest DAFR was observed in Omdurman [5.6 (3.5)] and in the chemical sector [2.5 (4.0)]. The fatal accident frequency rate in the mechanical and electrical engineering industry was the highest [0.0 (0.69)]. Male workers who were older, divorced, and had lower levels of education had the lowest safety performance indicators. The safety performance of the industrial enterprises in Khartoum city was the best. The safety performance in the chemical sector was the worst with regard to FSI and DAFR. The age, sex, and educational level of injured workers greatly affect safety performance.

Defense Industrial Base: Critical Infrastructure and Key Resources Sector-Specific Plan as Input to the National Infrastructure Protection Plan

National Research Council Canada - National Science Library

2007-01-01

This Defense Industrial Base (DIB) Sector-Specific Plan (SSP), developed in collaboration with industry and government security partners, provides sector-level critical infrastructure and key resources (CI/KR...

ENERGY SOURCES AND CARBON EMISSIONS IN THE IRON AND STEEL INDUSTRY SECTOR IN SOUTH ASIA

Directory of Open Access Journals (Sweden)

Tapan Sarker

2013-01-01

Full Text Available This paper examines CO2 emissions from electricity and fuel consumption of different energy sources consumed in the Iron and Steel Industry sector (non-ferrous included, also known as basic metal in five South Asian countries including Bangladesh, India, Nepal, Sri Lanka and Pakistan. The study finds that about 30% of the total energy in the manufacturing industry is used in this sector, which is about 11% of total industrial input, contributing approximately 13% to the Manufacturing Value Added (MVA. Electricity, on the other hand, shares almost 60% of total energy consumption in the five countries in South Asia, followed by natural gas, coal, kerosene and diesel. The study also finds that CO2 emissions vary across sectors in countries in which the study was conducted. For instance, while in Bangladesh CO2 emissions are primarily caused by electricity generation, in India the majority of CO2 emissions are originated from coal. On the contrary, CO2 emissions in Nepal are mostly generated through other fuels such as Charcoal, Diesel and Kerosene. This study provides some policy recommendations, which could help reduce CO2 emissions in the Iron and Steel Industry sector in the South Asian region.

An analysis on the short-term sectoral competitiveness impact of carbon tax in China

International Nuclear Information System (INIS)

Wang Xin; Li Ji Feng; Zhang Yaxiong

2011-01-01

Market-based instruments, particularly carbon tax, have recently drawn the attention of Chinese government by their cost-effective contribution to the achievement of China's climate targets. Most of the recent policy proposals have focused on its long-term impact. However, particularly for policy makers, both long term and short term effects of carbon tax would be necessary when determining tax rates. We provided a detailed analysis of short-term impacts of carbon tax on sectoral competitiveness in this paper. We divided China's economy into 36 sectors, based on its 2007 input-output table, in order to examine the ratio of carbon tax added costs to sector GDP. We were thus able to determine the impact level of a carbon tax on each sector. We then divided the sectoral trade impact into domestic competitiveness with regards to foreign imported products and international competitiveness external to the Chinese domestic market. We found that a high tax level (100 yuan/t CO 2 ) may necessitate compensatory measures to certain highly affected industries, and that a low tax rate (10 yuan/t CO 2 ) would generate few competitiveness problems for all industries and may therefore be considered as an appropriate starting point. - Highlights: → We study short-term sectoral competitiveness impact of carbon tax in China. → For each sector, we study its carbon cost, GDP share and trade intensity. → A high rate (100 yuan/t CO 2 ) may require compensatory measures to certain industries. → A low rate (10 yuan/t CO 2 ) would generate few competitiveness problems.

Market value stimulates CO2 reduction in non-industrial sectors

International Nuclear Information System (INIS)

Blacquiere, D.

2008-01-01

The emission of greenhouse gases by non-industrial sectors barely leads to additional costs. As a result there is no incentive to curb their emissions. In order to implement effective policy such an incentive is required though. Attaching a market value to the emission will provide such an incentive. [mk] [nl

An Analysis of Solar Panel Assembly as a Prison Industry

Science.gov (United States)

Lizak, R. M.

1980-01-01

An analysis of the effect of manufacturing solar collectors by California prison inmates is presented. It was concluded that the concept is feasible and would have little adverse effect on the private sector's solar industry.

Analysis of inter-country input-output table based on citation network: How to measure the competition and collaboration between industrial sectors on the global value chain

Science.gov (United States)

2017-01-01

The input-output table is comprehensive and detailed in describing the national economic system with complex economic relationships, which embodies information of supply and demand among industrial sectors. This paper aims to scale the degree of competition/collaboration on the global value chain from the perspective of econophysics. Global Industrial Strongest Relevant Network models were established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output tables and then transformed into Global Industrial Resource Competition Network/Global Industrial Production Collaboration Network models embodying the competitive/collaborative relationships based on bibliographic coupling/co-citation approach. Three indicators well suited for these two kinds of weighted and non-directed networks with self-loops were introduced, including unit weight for competitive/collaborative power, disparity in the weight for competitive/collaborative amplitude and weighted clustering coefficient for competitive/collaborative intensity. Finally, these models and indicators were further applied to empirically analyze the function of sectors in the latest World Input-Output Database, to reveal inter-sector competitive/collaborative status during the economic globalization. PMID:28873432

Analysis of inter-country input-output table based on citation network: How to measure the competition and collaboration between industrial sectors on the global value chain.

Science.gov (United States)

Xing, Lizhi

2017-01-01

The input-output table is comprehensive and detailed in describing the national economic system with complex economic relationships, which embodies information of supply and demand among industrial sectors. This paper aims to scale the degree of competition/collaboration on the global value chain from the perspective of econophysics. Global Industrial Strongest Relevant Network models were established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output tables and then transformed into Global Industrial Resource Competition Network/Global Industrial Production Collaboration Network models embodying the competitive/collaborative relationships based on bibliographic coupling/co-citation approach. Three indicators well suited for these two kinds of weighted and non-directed networks with self-loops were introduced, including unit weight for competitive/collaborative power, disparity in the weight for competitive/collaborative amplitude and weighted clustering coefficient for competitive/collaborative intensity. Finally, these models and indicators were further applied to empirically analyze the function of sectors in the latest World Input-Output Database, to reveal inter-sector competitive/collaborative status during the economic globalization.

Analysis of inter-country input-output table based on citation network: How to measure the competition and collaboration between industrial sectors on the global value chain.

Directory of Open Access Journals (Sweden)

Lizhi Xing

Full Text Available The input-output table is comprehensive and detailed in describing the national economic system with complex economic relationships, which embodies information of supply and demand among industrial sectors. This paper aims to scale the degree of competition/collaboration on the global value chain from the perspective of econophysics. Global Industrial Strongest Relevant Network models were established by extracting the strongest and most immediate industrial relevance in the global economic system with inter-country input-output tables and then transformed into Global Industrial Resource Competition Network/Global Industrial Production Collaboration Network models embodying the competitive/collaborative relationships based on bibliographic coupling/co-citation approach. Three indicators well suited for these two kinds of weighted and non-directed networks with self-loops were introduced, including unit weight for competitive/collaborative power, disparity in the weight for competitive/collaborative amplitude and weighted clustering coefficient for competitive/collaborative intensity. Finally, these models and indicators were further applied to empirically analyze the function of sectors in the latest World Input-Output Database, to reveal inter-sector competitive/collaborative status during the economic globalization.

How industry can help us fight against botnets : Notes on regulating private-sector intervention

NARCIS (Netherlands)

E Silva, Karine

2016-01-01

Could industry improve our response to botnet attacks? If so, how should this private sector participation be regulated? This paper examines how regulation could be used to facilitate private sector intervention against robot networks, also known as botnets. The first part of this paper is dedicated

The Comprehensive Approach to Assessing the Economic Security of the Industry Sector in Conditions of Globalization

Directory of Open Access Journals (Sweden)

Denysov Oleg Ye.

2018-01-01

Full Text Available The author carries out an empirical study of the level of economic security of the chemical industry sector of Ukraine in the direction of «production of polyvinyl chlorides». For this purpose the integral index of economic security has been calculated according to the model of functional-component blocks of economic security of sector, developed by the author. Application of this model allowed to research the algorithm of action of the model on the factual basis and to analyze the obtained indicators. This, in turn, made possible to draw a conclusion about the constructiveness and expediency of application of the model of basic functional-component blocks for calculating the level of economic security of the industry sector. With the help of this approach, with application of the complex, system-structural, dynamic and functional approaches, the level of economic security has been defined and the process of monitoring the status and level of economic security of the industry sector has been ensured.

A guide to the sources of energy use statistics for the industrial, commercial, agricultural and institutional sectors of the Canadian economy. Phase 2

Energy Technology Data Exchange (ETDEWEB)

1985-01-01

The intent of this report is to provide a detailed and comprehensive description of the current data available on energy consumption in selected sectors in Canada. These sectors are the industrial sector--mainly fishing/trapping, logging/forestry, mining, manufacturing, and construction--agriculture (including all types of farm operations and agricultural service industries) and the commerical/institutional sector (excluding government or public administration). Summaries of the sources of energy use information are presented according to source agency and individual energy commodity. Data bases are assessed according to the kinds of data collected, collection methods, availability, quality, coverage, format of presentation and units used, timeliness, and usefulness for analysis and forecasting. A separate section of the report discusses some of the problems with the data available, such as standardization of data codes, data gaps, lack of detail, and reconciliation of different data sources. 36 tabs.

Building a Comprehensive Mill-Level Database for the Industrial Sectors Integrated Solutions (ISIS) Model of the U.S. Pulp and Paper Sector

Science.gov (United States)

Modak, Nabanita; Spence, Kelley; Sood, Saloni; Rosati, Jacky Ann

2015-01-01

Air emissions from the U.S. pulp and paper sector have been federally regulated since 1978; however, regulations are periodically reviewed and revised to improve efficiency and effectiveness of existing emission standards. The Industrial Sectors Integrated Solutions (ISIS) model for the pulp and paper sector is currently under development at the U.S. Environmental Protection Agency (EPA), and can be utilized to facilitate multi-pollutant, sector-based analyses that are performed in conjunction with regulatory development. The model utilizes a multi-sector, multi-product dynamic linear modeling framework that evaluates the economic impact of emission reduction strategies for multiple air pollutants. The ISIS model considers facility-level economic, environmental, and technical parameters, as well as sector-level market data, to estimate the impacts of environmental regulations on the pulp and paper industry. Specifically, the model can be used to estimate U.S. and global market impacts of new or more stringent air regulations, such as impacts on product price, exports and imports, market demands, capital investment, and mill closures. One major challenge to developing a representative model is the need for an extensive amount of data. This article discusses the collection and processing of data for use in the model, as well as the methods used for building the ISIS pulp and paper database that facilitates the required analyses to support the air quality management of the pulp and paper sector. PMID:25806516

The approach to risk analysis in three industries

International Nuclear Information System (INIS)

Garrick, B.J.

1991-01-01

It is the purpose of this paper to review how risk and safety analysis is performed in the three major industries of nuclear power, space flight, and chemical and petroleum processes. The underlying reason for such a review is the belief that efficiencies and safety enhancements may result from a greater exchange of risk assessment technology between these industries. The thrust of this discussion related to the engineered systems involved in the three industries. The industries are very different. The chemical industry epitomizes the highly competitive private sector and its bottom-line emphasis; the nuclear power industry is unique by the degree to which it is regulated; and the space industry is essentially a government business just beginning to have commercial implications. Institutional differences are extreme; however, from a societal needs, and their safety implications have a far reaching impact on public opinion and support. In reviewing the risk and safety analysis activities, particular attention is given to the use of such quantitative approaches as probabilistic risk assessment (PRA) as it has evolved in the nuclear power industry

Aspects of the risk analysis in the process engineering industry

International Nuclear Information System (INIS)

Hennings, W.; Madjar, M.; Mock, R.; Reer, B.

1996-01-01

This document is the result of a multi-discipline working group of a portion of a project called Risk analysis for chemical plants. Within the framework of the project, only selected methods and tools of risk analysis, thus, aspects of method, were able to be discussed and developed further. Case examples from the chemical industry are dealt with in order to discuss the application of a computer assisted quantitative error analysis in this industrial sector. Included is also a comprehensive documentation of the data and results utilised in the examples. figs., tabs., refs

Scientific and technological capabilities in health-related areas: opportunities, challenges, and interactions with the industrial sector.

Science.gov (United States)

Vargas, Marco Antonio; Britto, Jorge

2016-11-03

Characterization of the scientific and technological infrastructure in health and its interactions with the industrial sector provides key elements for understanding the dynamics of innovation in health. This study conducts an exploratory analysis of the potentialities and limitations associated with scientific and technological capabilities in the health area in Brazil and the different links between the scientific and industrial sectors in health. The analysis points to important growth in internationally indexed research output, especially in certain areas such as pharmaceutics, public health, genetics, morphology, physiology, and microbiology. There has also been important growth in research groups that interact with the industrial sector in selected areas of health. The study highlights the importance of building more solid and permanent bridges between companies, research institutions, and the health system, linking the knowledge developed in research institutions to the dynamics of the industrial sector in health. Resumo: A caracterização da infraestrutura científica e tecnológica na área da saúde e das suas formas de articulação com a base produtiva representam elementos centrais na compreensão da dinâmica de inovação em saúde. Este estudo faz uma análise exploratória sobre as potencialidades e limitações associadas às capacitações científicas e tecnológicas na área da saúde no Brasil e as formas de articulação entre a base científica e a base produtiva em saúde. A análise aponta para o crescimento expressivo da produção bibliográfica com circulação internacional no campo da saúde, particularmente em determinadas áreas como farmácia, saúde coletiva, genética, morfologia, fisiologia e microbiologia. Além disso, observa-se um crescimento expressivo dos grupos de pesquisa com relacionamentos com o setor produtivo em áreas selecionadas da saúde. Destaca-se a importância da construção de pontes mais sólidas e

Characteristics of occupational musculoskeletal disorders of five sectors in service industry between 2004 and 2013.

Science.gov (United States)

Choi, Hyun-Woo; Kim, Young-Ki; Kang, Dong-Mug; Kim, Jong-Eun; Jang, Bo-Young

2017-01-01

' Work related musculoskeletal disorders (WRMSDs)' have been mostly reported in the manufacturing industry but recently the occurrence of industrial injuries has been constantly increasing in the service industry. This research is going to analyze the data about workers' compensation for WRMSDs in five different service sectors and identify characteristics of occupations with the highest approved occupations. According to the data released from the Korea Worker's Compensation & Welfare Service, the overview of 12,730 cases of workers' compensation for WRMSDs in five service sectors from 2004 to 2013 is going to be analyzed and the source data is going to be classified by the Korean Standard Classification of Occupations to select the top five occupations that have the highest number of approval. After selecting each five occupations from the service sector that have work related musculoskeletal disorders, the result showed that the occupation with the highest number of approval in the health and social care sector were the early childhood educators, cooks in the school canteens in education services sector, garbage collectors in the sanitation and similar services sector, deliverymen in wholesale and retail, consumer goods repair and building cleaners in general management businesses such as those in building maintenance. The major event observed in the top five occupations was the overexertion and reaction as a cause of WRMSDs. The day when the WRMSDs mostly occurred was on Monday and the most likely time was 10 am. The median days away from work and lost working days are 29-90 days and 0-50 days respectively. The difference in each occupation was observed in year of service, age, and gender. 83.21% of the approved cases of workers' compensation for WRMSDs occurred in the top 25 occupations in all of the five service sectors, which meant that the approval of workers' compensation is concentrated in specific occupations. This research is going to suggest

Energy rent and public policy: an analysis of the Canadian coal industry

International Nuclear Information System (INIS)

Gunton, Thomas

2004-01-01

This paper analyses issues in resource rent through a case study of the Canadian coal industry. A model of the coal industry is constructed to estimate the magnitude of rent and distribution of coal rent between government and industry over the 30-year period from 1970 to 2000. Disaggregation of results by coal sector shows that rent varied widely, with one sector generating substantial rent and other sectors incurring large losses. The pattern of development of the coal sector followed what can be termed a 'rent dissipation cycle' in which the generation of rent in the profitable sector created excessively optimistic expectations that encouraged new entrants to dissipate rent by developing uneconomic capacity. The analysis also shows that the system used to collect rent was ineffective. The public owner collected only one-third of the rent on the profitable mines and collected royalty revenue from the unprofitable mines even though no rent was generated. The case study illustrates that improvements in private sector planning based on a better appreciation of resource market fundamentals, elimination of government subsidies that encourage uneconomic expansion and more effective rent collection are all needed to avoid rent dissipation and increase the benefits of energy development in producing jurisdictions. The study also illustrates that estimates of rent in the resource sector should disaggregate results by sector and make adjustments for market imperfections to accurately assess the magnitude of potential rent

Ecological network analysis for a low-carbon and high-tech industrial park.

Science.gov (United States)

Lu, Yi; Su, Meirong; Liu, Gengyuan; Chen, Bin; Zhou, Shiyi; Jiang, Meiming

2012-01-01

Industrial sector is one of the indispensable contributors in global warming. Even if the occurrence of ecoindustrial parks (EIPs) seems to be a good improvement in saving ecological crises, there is still a lack of definitional clarity and in-depth researches on low-carbon industrial parks. In order to reveal the processes of carbon metabolism in a low-carbon high-tech industrial park, we selected Beijing Development Area (BDA) International Business Park in Beijing, China as case study, establishing a seven-compartment- model low-carbon metabolic network based on the methodology of Ecological Network Analysis (ENA). Integrating the Network Utility Analysis (NUA), Network Control Analysis (NCA), and system-wide indicators, we compartmentalized system sectors into ecological structure and analyzed dependence and control degree based on carbon metabolism. The results suggest that indirect flows reveal more mutuality and exploitation relation between system compartments and they are prone to positive sides for the stability of the whole system. The ecological structure develops well as an approximate pyramidal structure, and the carbon metabolism of BDA proves self-mutualistic and sustainable. Construction and waste management were found to be two active sectors impacting carbon metabolism, which was mainly regulated by internal and external environment.

Engineering in the energy sector. The single market and the engineering sector; Ingenieria en el sector energetico. El mercado unico y el sector de ingenieria

Energy Technology Data Exchange (ETDEWEB)

Garcia Rodrigues, A [Empresarios Agrupados, A.I.E., Madrid (Spain)

1993-12-15

Projects with large infrastructures, particularly those in the field of energy, provide a strong boost to certain industrial sectors in the country. In the case of Spain, the policy of direct management 'by components' of these projects - hydroelectric power plants, petrochemical plants, thermoelectric plants and nuclear power plants - adopted by the electric utility owners has furthered not only the local equipment manufacturing industry but also the engineering sector. At present, with full implementation of the Single Market in sight, it is particularly interesting for Spain to continue building up a powerful engineering sector, increasing its size and usefulness, and extending its traditional areas of action to other technologies, more on the lines of engineering and consulting firms in the USA than in the rest of Europe. The intention is to endow our equipment and construction companies with the skills necessary to enable them to compete with large European conglomerates in their respective sectors. The structure of these conglomerates usually contains engineering capabilities which are not habitual in our industry. Examples are given, showing how this model has been used to compete and win awards for important international projects. A specific analysis has been made of the position of Spanish engineering and industry in nuclear power generation projects in the former Soviet Union and East European countries, in which large investments are expected to be made. (author)

Knowledge translation in tri-sectoral collaborations: An exploration of perceptions of academia, industry and healthcare collaborations in innovation adoption.

Science.gov (United States)

Ii, Suzanne Sayuri; Fitzgerald, Louise; Morys-Carter, Megan M; Davie, Natasha L; Barker, Richard

2018-02-01

With the aging population and increase in chronic disease conditions, innovation to transform treatment pathways and service delivery will be necessary. The innovation adoption process however, can take 15 years before widespread adoption occurs in most healthcare systems. Current UK government policies to increase the facilitation of innovation adoption are under way. The aim of this study is to explore perceptions of tri-sectoral collaborations in the healthcare sector. The data in the study are drawn from a cross-sectional survey conducted in 2015 of professionals in academia, industry and the healthcare sectors in England, focusing on Diabetes care. Academia and healthcare respondents had the least work experience outside of their sectors compared to the industry respondents. Healthcare and academia respondents rated the industry sector less trustworthy, unethical, having different goals and less understanding of the other sectors. Industry respondents had a more positive perspective towards potential collaborators. The results from the study demonstrate greater potential challenges to tri-sectoral collaborations and the government's knowledge translation policy, due to pre-conceived notions and lack of understanding of other sectors. The purely structural approach of establishing government mandated translational networks may be insufficient without active attempts to improve collaborative relationships. Mechanisms to facilitate trust building and collaboration are proposed. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

Balancing health and industrial policy objectives in the pharmaceutical sector: lessons from Australia.

Science.gov (United States)

Morgan, Steve; McMahon, Meghan; Greyson, Devon

2008-08-01

Policy-makers worldwide struggle to balance health with industrial policy objectives in the pharmaceutical sector. Tensions arise over pricing and reimbursement in particular. What health plans view as necessary to maintain equitable access to medicines, industry views as inimical to R&D and innovation. Australia has grappled with this issue for years, even incorporating the goal of "maintaining a responsible and viable medicines industry" into its National Medicines Policy. This case study was conducted via a narrative review that examined Australia's experiences balancing health and industrial policy objectives in the pharmaceutical sector. The review included electronic databases, grey literature and government publications for reports on relevant Australian policy published over the period 1985-2007. While pharmaceutical companies claim that Australia's pricing and reimbursement policies suppress drug prices and reduce profits, national policy audits indicate these claims are misguided. Australia appears to have secured relatively low prices for generics and "me-too drugs" while paying internationally competitive prices for "breakthrough" medicines. Simultaneously, Australia has focused efforts on local pharmaceutical investment through a variety of industry-targeted R&D incentive policies. Despite the fact that policy reviews suggest that Australia has achieved balance between health and industrial policy objectives, the country continues to face criticism from industry that its health goals harm innovation and R&D. Recent reforms raise the question whether Australia can sustain the apparent balance.

Carbon Capture and Utilization in the Industrial Sector.

Science.gov (United States)

Psarras, Peter C; Comello, Stephen; Bains, Praveen; Charoensawadpong, Panunya; Reichelstein, Stefan; Wilcox, Jennifer

2017-10-03

The fabrication and manufacturing processes of industrial commodities such as iron, glass, and cement are carbon-intensive, accounting for 23% of global CO 2 emissions. As a climate mitigation strategy, CO 2 capture from flue gases of industrial processes-much like that of the power sector-has not experienced wide adoption given its high associated costs. However, some industrial processes with relatively high CO 2 flue concentration may be viable candidates to cost-competitively supply CO 2 for utilization purposes (e.g., polymer manufacturing, etc.). This work develops a methodology that determines the levelized cost ($/tCO 2 ) of separating, compressing, and transporting carbon dioxide. A top-down model determines the cost of separating and compressing CO 2 across 18 industrial processes. Further, the study calculates the cost of transporting CO 2 via pipeline and tanker truck to appropriately paired sinks using a bottom-up cost model and geo-referencing approach. The results show that truck transportation is generally the low-cost alternative given the relatively small volumes (ca. 100 kt CO 2 /a). We apply our methodology to a regional case study in Pennsylvania, which shows steel and cement manufacturing paired to suitable sinks as having the lowest levelized cost of capture, compression, and transportation.

Generation and Use of Thermal Energy in the Industrial Sector and Opportunities to Reduce its Carbon Emissions

International Nuclear Information System (INIS)

McMillan, Colin; Boardman, Richard; McKellar, Michael; Sabharwall, Piyush; Ruth, Mark; Bragg-Sitton, Shannon

2016-01-01

focused on tightly coupled N-R HESs. Previously, INL analyzed the dynamic performance of two hypothetical N-R HESs and NREL analyzed the optimal economic configurations and operation of the same two N-R HESs. The first of those two is a Texas-synthetic gasoline scenario that includes four subsystems: a nuclear reactor, thermal power cycle, wind power plant, and synthetic gasoline production technology. The second hypothetical N-R HES is an Arizona-desalination scenario with four subsystems: a nuclear reactor, thermal power cycle, PV, and a desalination plant. INL analyzed the technical performance of the same two N-R HESs in another report. In another report NREL used the Texas-synthetic gasoline scenario provides the basis; however, the industrial process was removed. Instead, that N-R HES sells heat directly to an industrial customer. Subsystems that convert electricity to heat were also included. Future analyses are planned for other N-R HES options including one where hydrogen is produced within an N-R HES. This report quantifies greenhouse gas (GHG) emissions from the industrial sector and identifies opportunities for non-GHG-emitting thermal energy sources, such as N-R HESs, to replace the most significant GHG-emitting U.S. industries based on targeted, process-level analysis of industrial heat requirements.

Generation and Use of Thermal Energy in the Industrial Sector and Opportunities to Reduce its Carbon Emissions

Energy Technology Data Exchange (ETDEWEB)

McMillan, Colin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); McKellar, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sabharwall, Piyush [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ruth, Mark [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bragg-Sitton, Shannon [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-09-01

focused on tightly coupled N-R HESs. Previously, INL analyzed the dynamic performance of two hypothetical N-R HESs and NREL analyzed the optimal economic configurations and operation of the same two N-R HESs. The first of those two is a Texas-synthetic gasoline scenario that includes four subsystems: a nuclear reactor, thermal power cycle, wind power plant, and synthetic gasoline production technology. The second hypothetical N-R HES is an Arizona-desalination scenario with four subsystems: a nuclear reactor, thermal power cycle, PV, and a desalination plant. INL analyzed the technical performance of the same two N-R HESs in another report. In another report NREL used the Texas-synthetic gasoline scenario provides the basis; however, the industrial process was removed. Instead, that N-R HES sells heat directly to an industrial customer. Subsystems that convert electricity to heat were also included. Future analyses are planned for other N-R HES options including one where hydrogen is produced within an N-R HES. This report quantifies greenhouse gas (GHG) emissions from the industrial sector and identifies opportunities for non-GHG-emitting thermal energy sources, such as N-R HESs, to replace the most significant GHG-emitting U.S. industries based on targeted, process-level analysis of industrial heat requirements.

Sector trends and driving forces of global energy use and greenhouse gas emissions: focus in industry and buildings

Energy Technology Data Exchange (ETDEWEB)

Price, Lynn; Worrell, Ernst; Khrushch, Marta

1999-09-01

Disaggregation of sectoral energy use and greenhouse gas emissions trends reveals striking differences between sectors and regions of the world. Understanding key driving forces in the energy end-use sectors provides insights for development of projections of future greenhouse gas emissions. This report examines global and regional historical trends in energy use and carbon emissions in the industrial, buildings, transport, and agriculture sectors, with a more detailed focus on industry and buildings. Activity and economic drivers as well as trends in energy and carbon intensity are evaluated. The authors show that macro-economic indicators, such as GDP, are insufficient for comprehending trends and driving forces at the sectoral level. These indicators need to be supplemented with sector-specific information for a more complete understanding of future energy use and greenhouse gas emissions.

Sector trends and driving forces of global energy use and greenhouse gas emissions: focus in industry and buildings

International Nuclear Information System (INIS)

Price, Lynn; Worrell, Ernst; Khrushch, Marta

1999-01-01

Disaggregation of sectoral energy use and greenhouse gas emissions trends reveals striking differences between sectors and regions of the world. Understanding key driving forces in the energy end-use sectors provides insights for development of projections of future greenhouse gas emissions. This report examines global and regional historical trends in energy use and carbon emissions in the industrial, buildings, transport, and agriculture sectors, with a more detailed focus on industry and buildings. Activity and economic drivers as well as trends in energy and carbon intensity are evaluated. The authors show that macro-economic indicators, such as GDP, are insufficient for comprehending trends and driving forces at the sectoral level. These indicators need to be supplemented with sector-specific information for a more complete understanding of future energy use and greenhouse gas emissions

Decoupling of industrial energy consumption and CO2-emissions in energy-intensive industries in Scandinavia

International Nuclear Information System (INIS)

Enevoldsen, Martin K.; Ryelund, Anders V.; Andersen, Mikael Skou

2007-01-01

As methodology the ex-post analysis deserves more attention as a device to calibrate energy sector models. This paper studies the impact of energy prices and taxes on energy efficiency and carbon emissions of ten industrial sectors in the three Scandinavian countries. A database with sector-specific energy prices and taxes has been established, which allows the analysis to take various price reductions and tax exemptions better into account. A translog factor demand system estimation for a cross industry pooled model is explored and fixed effects across industries and time is estimated. The findings here confirm recent analyses which indicate higher long-term elasticities for industries than normally assumed in Scandinavian energy-sector models. With the observations on differences in energy-intensities among sectors and countries the findings allow for some optimism as to the opportunities for further decoupling between trends in gross value added, carbon emissions and energy consumption

Structural change and inter-sectoral mobility in a two-sector economy

International Nuclear Information System (INIS)

Antoci, Angelo; Galeotti, Marcello; Iannucci, Gianluca; Russu, Paolo

2015-01-01

This paper studies the dynamics of a two-sector economy (with a natural resource-dependent sector and an industrial sector) characterized by free inter-sectoral labor mobility and heterogeneity of agents (workers and entrepreneurs). In such a context, we analyze the effects of the deterioration of natural resources, caused by the production activity of both sectors, on inter-sectoral movements of the labor force (structural changes), on ecological dynamics and on the revenues of workers and entrepreneurs. As in the seminal work by Matsuyama (1992), we obtain that a low productivity of labor in the resource-dependent sector can fuel the industrialization process. However, differently from Matsuyama, in our model the industrialization process may give rise to a reduction in workers’ revenues if the contribution to environmental depletion of the industrial sector, per unit of product, is higher than that of the resource-dependent one.

ANALYSIS OF CHINESE GARMENT EXPORT SECTOR

OpenAIRE

Zhang, Mina

2009-01-01

This paper analyzes the Chinese garment export sector. The Chinese garment industry has been an economic pillar ever since the open-door policy and economic reforms of the country took effect in 1979. Earnings from apparel exports have been a major source of foreign revenue. The industry has thus developed and played a vital role in the growth of China?s foreign trade and economic development although some signs of slackened vigour have been revealed recently. To assess the threats and opport...

Assessment and exploitation of energy-related externalities in the industrial sector

International Nuclear Information System (INIS)

Diakoulaki, D.; Mirasgedis, S.; Tourkolias, C.

2007-01-01

The scope of this paper is to comparatively evaluate the effectiveness of alternative policy measures in reducing impacts from atmospheric pollution generated from industrial energy use. The evaluation procedure relies on the assessment of energy-related externalities by exploiting the methodology developed in the framework of the ExternE project. The analysis focuses on 2 industrial units located in the Greater Athens area and examines three types of abatement measures that can be used independently of the extent energy saving or end-of-pipe emission reduction measures are used: substitution of fuel oil with natural gas, relocation of the units several hundreds of kilometers far from Athens and increase of stack height in the same site. It results that the use of natural gas is by far the most effective among these measures, leading to a reduction of more than 90% of both local and regional damages. The relative effectiveness of the examined measures does not change if the significant uncertainties associated with the accounting procedure are taken into account, while inclusion of the external cost due to greenhouse gases emissions is further accentuating the advantages of natural gas. Moreover, it is shown that the quantifiable energy-related external costs of a single industrial product, may be very low compared to the corresponding private costs, but they sum up to significantly high damages to society if we take into account the total energy consumption in the industrial sector

Industrial innovation and intra sectoral and inter sectoral technology diffusion; Innovacion industrial y difusion tecnological intrasectorial e intersectorial

Energy Technology Data Exchange (ETDEWEB)

Serrano Domingo, G.; Cabrera Borras, B.; Requena Silvente, F.

2012-07-01

This paper examines whether sectoral backward and forward linkages can generate positive externalises in sectoral innovation through diffusion of technological knowledge, both across countries within a sector or across sectors within a country. Using a sample of 14 OECD countries and 12 sectors over the period 1995-2005 we find that forward linkages enhance sectoral innovation. Intra sectoral slipovers are important among sectors and countries with low-to-medium R an D intensity while inter sectoral slipovers have a major impact on sectors with high R and D intensity. (Author)

Efficiency of Polish metallurgical industry based on data envelopment analysis

Directory of Open Access Journals (Sweden)

J. Baran

2016-04-01

Full Text Available The main purpose of this paper is to compare the technical efficiency of 12 sectors manufacturing basic metals and metal products in Poland. This article presents the use of Data Envelopment Analysis models, to determine overall technical efficiency, pure technical efficiency and scale efficiency of metallurgical branches in Poland. The average technical efficiency of metallurgical industry in Poland was quite high. The analysis gives a possibility to create a ranking of sectors. Three branches were found to be fully efficient: manufacture of basic iron and steel and of ferroalloys, manufacture of basic precious and other non - ferrous metals and manufacture of tubes, pipes, hollow profiles and related fittings, of steel. The results point out the reasons of the inefficiency and provide improving directions for the inefficient sectors.

Analysis of stock market anomalies: US cross-sectoral comparison

OpenAIRE

Jílek, Lukáš

2012-01-01

The purpose of this thesis is to analyze anomalies in the US stock market. Special attention is put on Day of the week effect, January effect, and Part of the month effect. We focus on comparison of companies with low and high capitalization. We perform an analysis across 6 major industrial sectors. Then, we discuss the findings with results of past projects and finally, we try to find a speculative investment strategy. We found out that neither Day of the week effect nor January effect do no...

Evaluation on the efficiency of the construction sector companies in Malaysia with data envelopment analysis model

Science.gov (United States)

Weng Hoe, Lam; Jinn, Lim Shun; Weng Siew, Lam; Hai, Tey Kim

2018-04-01

In Malaysia, construction sector is essential parts in driving the development of the Malaysian economy. Construction industry is an economic investment and its relationship with economic development is well posited. However, the evaluation on the efficiency of the construction sectors companies listed in Kuala Lumpur Stock Exchange (KLSE) with Data Analysis Envelopment (DEA) model have not been actively studied by the past researchers. Hence the purpose of this study is to examine the financial performance the listed construction sectors companies in Malaysia in the year of 2015. The results of this study show that the efficiency of construction sectors companies can be obtained by using DEA model through ratio analysis which defined as the ratio of total outputs to total inputs. This study is significant because the inefficient companies are identified for potential improvement.

Industrial CO2 emissions in China based on the hypothetical extraction method: Linkage analysis

International Nuclear Information System (INIS)

Wang, Yuan; Wang, Wenqin; Mao, Guozhu; Cai, Hua; Zuo, Jian; Wang, Lili; Zhao, Peng

2013-01-01

Fossil fuel-related CO 2 emissions are regarded as the primary sources of global climate change. Unlike direct CO 2 emissions for each sector, CO 2 emissions associated with complex linkages among sectors are usually ignored. We integrated the input–output analysis with the hypothetical extraction method to uncover the in-depth characteristics of the inter-sectoral linkages of CO 2 emissions. Based on China's 2007 data, this paper compared the output and demand emissions of CO 2 among eight blocks. The difference between the demand and output emissions of a block indicates that CO 2 is transferred from one block to another. Among the sectors analyzed in this study, the Energy industry block has the greatest CO 2 emissions with the Technology industry, Construction and Service blocks as its emission's primary destinations. Low-carbon industries that have lower direct CO 2 emissions are deeply anchored to high-carbon ones. If no effective measures are taken to limit final demand emissions or adjust energy structure, shifting to an economy that is low-carbon industries oriented would entail a decrease in CO 2 emission intensity per unit GDP but an increase in overall CO 2 emissions in absolute terms. The results are discussed in the context of climate-change policy. - Highlights: • Quantitatively analyze the characteristics of inter-industrial CO 2 emission linkages. • Propose the linkage measuring method of CO 2 emissions based on the modified HEM. • Detect the energy industry is a key sector on the output of embodied carbon. • Conclude that low-carbon industries are deeply anchored to high-carbon industries

The potential of natural gas use including cogeneration in large-sized industry and commercial sector in Peru

International Nuclear Information System (INIS)

Gonzales Palomino, Raul; Nebra, Silvia A.

2012-01-01

In recent years there have been several discussions on a greater use of natural gas nationwide. Moreover, there have been several announcements by the private and public sectors regarding the construction of new pipelines to supply natural gas to the Peruvian southern and central-north markets. This paper presents future scenarios for the use of natural gas in the large-sized industrial and commercial sectors of the country based on different hypotheses on developments in the natural gas industry, national economic growth, energy prices, technological changes and investment decisions. First, the paper estimates the market potential and characterizes the energy consumption. Then it makes a selection of technological alternatives for the use of natural gas, and it makes an energetic and economic analysis and economic feasibility. Finally, the potential use of natural gas is calculated through nine different scenarios. The natural gas use in cogeneration systems is presented as an alternative to contribute to the installed power capacity of the country. Considering the introduction of the cogeneration in the optimistic–advanced scenario and assuming that all of their conditions would be put into practice, in 2020, the share of the cogeneration in electricity production in Peru would be 9.9%. - Highlights: ► This paper presents future scenarios for the use of natural gas in the large-sized industrial and commercial sectors of Peru. ► The potential use of natural gas is calculated through nine different scenarios.► The scenarios were based on different hypotheses on developments in the natural gas industry, national economic growth, energy prices, technological changes and investment decisions. ► We estimated the market potential and characterized the energy consumption, and made a selection of technological alternatives for the use of natural gas.

Engineering in the energy sector. The single market and the engineering sector

International Nuclear Information System (INIS)

Garcia Rodrigues, A.

1993-01-01

Projects with large infrastructures, particularly those in the field of energy, provide a strong boost to certain industrial sectors in the country. In the case of Spain, the policy of direct management 'by components' of these projects - hydroelectric power plants, petrochemical plants, thermoelectric plants and nuclear power plants - adopted by the electric utility owners has furthered not only the local equipment manufacturing industry but also the engineering sector. At present, with full implementation of the Single Market in sight, it is particularly interesting for Spain to continue building up a powerful engineering sector, increasing its size and usefulness, and extending its traditional areas of action to other technologies, more on the lines of engineering and consulting firms in the USA than in the rest of Europe. The intention is to endow our equipment and construction companies with the skills necessary to enable them to compete with large European conglomerates in their respective sectors. The structure of these conglomerates usually contains engineering capabilities which are not habitual in our industry. Examples are given, showing how this model has been used to compete and win awards for important international projects. A specific analysis has been made of the position of Spanish engineering and industry in nuclear power generation projects in the former Soviet Union and East European countries, in which large investments are expected to be made. (author)

Market-based implementation of Kyoto commitments: how the financial/insurance sector can support industry

International Nuclear Information System (INIS)

Knoepfel, Ivo

1999-01-01

The implementation of the Kyoto Protocol in the context of the Framework Convention on Climate Change will probably lead to economic winners and losers in various sectors of the economy. Especially carbon intensive industries will need to develop hedging strategies to prevent potential negative effects and to optimise market opportunities. Such strategies can be based on technological innovation, market and product diversification, and on financial/legal offsets. The Kyoto Protocol has introduced new market-based instruments, which can, in a near future provide such hedging opportunities. These include joint implementation, the so-called clean development mechanism, and international emissions trading. The financial services and insurance sector are the natural partners of industry in designing tailored hedging strategies. It is recommended that industry, financial services and insurance companies take a more proactive role in further developing the market-based instruments established by the Kyoto Protocol. (Author)

Sectoral agreements and competitive distortions - a Swedish perspective; Effects of EU Emissions Trading System for European industry

Energy Technology Data Exchange (ETDEWEB)

Zetterberg, Lars; Holmgren, Kristina

2009-03-15

sector approaches to be discussed under the Ad-hoc Working Group on future commitments for Annex I Parties under the Kyoto Protocol (AWG-KP): i) Sector CDM - a CDM crediting mechanism with a previously established baseline ii) Sectoral no-lose mechanism - Sectoral crediting against a previously established no-lose target iii) Sectoral emission trading based on a sector emissions cap Based on these three sectoral models, we have analysed what parameters are important for reducing competition distortion for Swedish industry. We have assumed that these sector agreements are implemented in a developing country (DC). We conclude that if sector agreements are to reduce distortions on competition, it is important that the sector agreements create a real carbon price in the DC, i.e. that emissions of carbon dioxide are associated with a cost for the emitter. All three sector agreement-models suggested by the EU can potentially create a carbon price. The driver for emission reductions are in all three cases the international demand for offsets. As a potentially large buyer of off-sets, the EU demand for off-sets is likely to increase the carbon price in the DC sector. The choice of EU policy with respect to imports of off-set will therefore have great importance. Other buyers, such as other countries, emission trading systems or the voluntary credit market will of course also be important. Moreover, imports of off-sets may reduce the price on EU ETS allowances, thus further narrowing the carbon price gap between the two markets. If an important objective of a sectoral agreement is to reduce competition distortion it should be implemented in sectors where the corresponding Swedish industry has significant carbon related costs and where there is significant trade intensity between Sweden and regions outside the EU. Our preliminary analysis indicates that Swedish sectors with potentially high maximum value at stake are Refineries; Pulp and Paper; Iron and Steel; Cement and Lime; and

Review of US ESCO industry market trends: an empirical analysis of project data

International Nuclear Information System (INIS)

Goldman, Charles A.; Hopper, Nicole C.; Osborn, Julie G.

2005-01-01

This comprehensive empirical analysis of US energy service company (ESCO) industry trends and performance employs two parallel analytical approaches: a survey of firms to estimate total industry size, and a database of ∼1500 ESCO projects, from which we report target markets and typical project characteristics, energy savings and customer economics. We estimate that industry investment for energy-efficiency related services reached US$2 billion in 2000 following a decade of strong growth. ESCO activity is concentrated in states with high economic activity and strong policy support. Typical projects save 150-200 MJ/m 2 /year and are cost-effective with median benefit/cost ratios of 1.6 and 2.1 for institutional and private sector projects. The median simple payback time (SPT) is 7 years among institutional customers; 3 years is typical in the private sector. Reliance on DSM incentives has decreased since 1995. Preliminary evidence suggests that state enabling policies have boosted the industry in medium-sized states. ESCOs have proven resilient in the face of restructuring and will probably shift toward selling 'energy solutions', with energy efficiency part of a package. We conclude that appropriate policy support - both financial and non-financial - can 'jump-start' a viable private-sector energy-efficiency services industry that targets large institutional and commercial/industrial customers

Review of US ESCO industry market trends: an empirical analysis of project data

International Nuclear Information System (INIS)

Goldman, C.A.; Hopper, N.C.; Osborn, J.G.

2005-01-01

This comprehensive empirical analysis of US energy service company (ESCO) industry trends and performance employs two parallel analytical approaches: a survey of firms to estimate total industry size, and a database of ∼1500 ESCO projects, from which we report target markets and typical project characteristics, energy savings and customer economics. We estimate that industry investment for energy-efficiency related services reached US$2 billion in 2000 following a decade of strong growth. ESCO activity is concentrated in states with high economic activity and strong policy support. Typical projects save 150-200 MJ/m 2 /year and are cost-effective with median benefit/cost ratios of 1.6 and 2.1 for institutional and private sector projects. The median simple payback time (SPT) is 7 years among institutional customers; 3 years is typical in the private sector. Reliance on DSM incentives has decreased since 1995. Preliminary evidence suggests that state enabling policies have boosted the industry in medium-sized states. ECSOs have proven resilient in the face of restructuring and will probably shift toward selling 'energy solutions', with energy efficiency part of a package. We conclude that appropriate policy support - both financial and non-financial - can 'jump-start' a viable private-sector energy-efficiency services industry that targets large institutional and commercial/industrial customers. (author)

Hyperspectral imaging for diagnosis and quality control in agri-food and industrial sectors

Science.gov (United States)

García-Allende, P. Beatriz; Conde, Olga M.; Mirapeix, Jesus; Cobo, Adolfo; Lopez-Higuera, Jose M.

2010-04-01

Optical spectroscopy has been utilized in various fields of science, industry and medicine, since each substance is discernible from all others by its spectral properties. However, optical spectroscopy traditionally generates information on the bulk properties of the whole sample, and mainly in the agri-food industry some product properties result from the heterogeneity in its composition. This monitoring is considerably more challenging and can be successfully achieved by the so-called hyperspectral imaging technology, which allows the simultaneous determination of the optical spectrum and the spatial location of an object in a surface. In addition, it is a nonintrusive and non-contact technique which gives rise to a great potential for industrial applications and it does not require any particular preparation of the samples, which is a primary concern in food monitoring. This work illustrates an overview of approaches based on this technology to address different problems in agri-food and industrial sectors. The hyperspectral system was originally designed and tested for raw material on-line discrimination, which is a key factor in the input stages of many industrial sectors. The combination of the acquisition of the spectral information across transversal lines while materials are being transported on a conveyor belt, and appropriate image analyses have been successfully validated in the tobacco industry. Lastly, the use of imaging spectroscopy applied to online welding quality monitoring is discussed and compared with traditional spectroscopic approaches in this regard.

Sector model analysis of risk on cross-jurisdictional treatment of disaster waste related to the Great East Japan Earthquake

International Nuclear Information System (INIS)

Nagashima, Miori; Itokawa, Etsuko; Ozuka, Yohei

2012-01-01

This study addressed the controversial issue of disaster waste treatment in the reconstruction efforts following the Great East Japan Earthquake. Using the Sector Model (Matsumoto 2009), we categorized a range of actions taken in relation to the cross-jurisdictional treatment into the four sectors, government, industry, academia, and private. The analysis through this Sector Model made it possible to map the entire layout of waste treatment, inclusive of less-visible industry and academia sectors. Accordingly, we have argued that differences of risk awareness are not necessarily due to sector differences but rather depend on two aspects of the disaster waste treatment; the safety levels and the nationwide treatment of waste in Japan. We further suggest that the discrepancy in the arguments on safety levels emerged as a result of scientific under-determination and cross-jurisdictional treatment from social and/or political under-determination. (author)

Energy use in the Greek manufacturing sector: A methodological framework based on physical indicators with aggregation and decomposition analysis

International Nuclear Information System (INIS)

Salta, Myrsine; Polatidis, Heracles; Haralambopoulos, Dias

2009-01-01

A bottom-up methodological framework was developed and applied for the period 1985-2002, to selected manufacturing sub-sectors in Greece namely, food, beverages and tobacco, iron and steel, non-ferrous metals, non-metallic minerals and paper. Disaggregate physical data were aggregated according to their specific energy consumption (SEC) values and physical energy efficiency indicators were estimated. The Logarithmic Mean Divisia index method was also used and the effects of the production, structure and energy efficiency to changes in sub-sectoral manufacturing energy use were further assessed. Primary physical energy efficiency improved by 28% for the iron and steel and by 9% for the non-metallic minerals industries, compared to the base year 1990. For the food, beverages and tobacco and the paper sub-sectors, primary efficiency deteriorated by 20% and by 15%, respectively; finally electricity efficiency deteriorated by 7% for the non-ferrous metals. Sub-sectoral energy use is mainly driven by production output and energy efficiency changes. Sensitivity analysis showed that alternative SEC values do not influence the results whereas the selected base year is more critical for this analysis. Significant efficiency improvements refer to 'heavy' industry; 'light' industry needs further attention by energy policy to modernize its production plants and improve its efficiency

Energy use in the Greek manufacturing sector: A methodological framework based on physical indicators with aggregation and decomposition analysis

Energy Technology Data Exchange (ETDEWEB)

Salta, Myrsine; Polatidis, Heracles; Haralambopoulos, Dias [Energy Management Laboratory, Department of Environment, University of the Aegean, University Hill, Mytilene 81100 (Greece)

2009-01-15

A bottom-up methodological framework was developed and applied for the period 1985-2002, to selected manufacturing sub-sectors in Greece namely, food, beverages and tobacco, iron and steel, non-ferrous metals, non-metallic minerals and paper. Disaggregate physical data were aggregated according to their specific energy consumption (SEC) values and physical energy efficiency indicators were estimated. The Logarithmic Mean Divisia index method was also used and the effects of the production, structure and energy efficiency to changes in sub-sectoral manufacturing energy use were further assessed. Primary physical energy efficiency improved by 28% for the iron and steel and by 9% for the non-metallic minerals industries, compared to the base year 1990. For the food, beverages and tobacco and the paper sub-sectors, primary efficiency deteriorated by 20% and by 15%, respectively; finally electricity efficiency deteriorated by 7% for the non-ferrous metals. Sub-sectoral energy use is mainly driven by production output and energy efficiency changes. Sensitivity analysis showed that alternative SEC values do not influence the results whereas the selected base year is more critical for this analysis. Significant efficiency improvements refer to ''heavy'' industry; ''light'' industry needs further attention by energy policy to modernize its production plants and improve its efficiency. (author)

Environmental indexes for the aggregation of emissions of industrial sectors; Milieu-indexen voor het aggregeren van emissies van bedrijfstakken

Energy Technology Data Exchange (ETDEWEB)

Smeets, E.; Weterings, R. [TNO Studiecentrum voor Technologie en Beleid, Delft (Netherlands); Klein, A.; Pulles, M.P.J. [TNO Milieuwetenschappen, Delft (Netherlands)

1995-01-01

The Dutch Emission Registration is an integral information system which contains data on the emissions of circa 900 materials of more than 700 businesses in the Netherlands. In this report attention is paid to how data from the Emission Registration can be presented such that specific groups of businesses and industrial sectors can be stimulated to reduce their emissions. Thereto, an index has been developed which gives an indication of the environmental load (emission in the year of registration) and the environmental performance (trends in emissions during a number of years) of groups of businesses and industrial sectors. Based on the results of a literature study six possible environmental indexes were investigated and compared for two randomly chosen groups of businesses (building materials, ceramics and glass industry and metal products industry) and two randomly chosen industrial sectors (fertilizer industry, and medicine and bandages industry). The indexes were calculated for the years 1988, 1990 and 1992. The index, which is based on a unweighted aggregation of emissions of a business group or industrial class, divided by the national emission and corrected for the number of laborers, appeared to be the most favorable. 9 refs.

Environmental pollution as engine of industrialization

Science.gov (United States)

Antoci, Angelo; Galeotti, Marcello; Sordi, Serena

2018-05-01

This paper analyzes the dynamics of a small open economy with two sectors (a farming sector and an industrial one), heterogeneous agents (workers and entrepreneurs) and free inter-sectoral labor mobility. Labor productivity in the first sector is negatively affected by environmental pollution generated by both sectors, whereas in the second sector it is positively affected by physical capital accumulated by entrepreneurs. Through a global analysis of the non-linear three-dimensional dynamic system of the model we derive conditions under which industrialization generates a decline in workers' revenues in both sectors.

Analysis of leading sector of Jambi City

Directory of Open Access Journals (Sweden)

Hardiani Hardiani

2017-09-01

Full Text Available This study aims to analyze the leading sectors in the city of Jambi. The main data used is GDP data of Jambi City series 2010 for the period of 2012-2014. Analysis tool that is used are Location Quotient, Shift Share, Klassen Typology and Overlay Analysis. The results of the analysis found that of the 14 basic sectors in Jambi City (based on LQ analysis, there are four priority sectors namely electricity and gas procurement, building, large and retail trade, car and motorcycle repairs, health service, and social activities. Keywords: Location Quotient, Shift Share, Klassen Tipology, Overlay Analysis

The French nuclear sector. Situation and predictions 2018 - Sectoral and competitive analysis

International Nuclear Information System (INIS)

2017-01-01

This document comprises two reports. A first one, published and updated three times a year, and a second one which is a yearly publication. The first one, based on an analysis of market perspectives and of actor strategies, proposes a synthesis on the consequences of the evolution of the economic environment, on major trends noticed for the nuclear sector, and on predictable evolutions. It proposes the most recent data regarding the activities of more than 100 firms belonging to the sector (notably in terms of electric power production, of turnover for firms specialised in nuclear maintenance or in the fuel cycle). It highlights recent events for companies of the sector: takeovers, investments, restructuring, introduction of new products, and so on. It proposes a sector-based dashboard which contains all the critical figures useful to analyse the sector situation (activity determining factors, key figures for the sector and its environment). The annual report proposes a general presentation of the sector (determining factors of the activity, operated nuclear plants in the world, nuclear power production in the world, uranium production and consumption in the world, maintenance and improvement expenses on nuclear plants, electric power consumption and shares in power generation by different sources in France), an analysis of the evolution of the sector activity (trends, indicators, financial performance of actors in the maintenance of nuclear plants), an overview of important issues for the profession (growth issue despite the maturity of the French market, implications of intensification of foreign competition, of higher safety requirements, and of a decrease of nuclear energy profitability), and an analysis of the sector economic structure (turnovers, personnel, position of France among world exporters, equipment export structure, key figures for nuclear maintenance). The last part proposes presentations of 20 French actors and data and information sheets for 10

Four Sectors of Industry in USA and Europe compared. Business Strategies and Climate Change

International Nuclear Information System (INIS)

Van der Woerd, F.; De Wit, K.; Vellinga, P.; Kolk, A.; Levy, D.

2000-01-01

Private companies will play a critical role in implementation of successful climate policies. However, until now little is known about triggers to develop corporate climate strategies. In a USA-Europe co-operation, researchers have investigated emerging climate strategies in the oil, automobile, chemical and bank and insurance industries. A focal question was whether strategies of EU based corporations differ systematically from USA based corporations. Results show rather sectorial specific developments. In most sectors, i.e. oil, automobile and banks, European corporations generally tend to have more advanced climate policies than their USA counterparts, but this does not apply to chemical companies. In the automobile industry, USA and Europe show convergent strategies. In the other sectors, convergence is not clearly visible

Generation and Use of Thermal Energy in the U.S. Industrial Sector and Opportunities to Reduce its Carbon Emissions

Energy Technology Data Exchange (ETDEWEB)

McMillan, Colin A. [National Renewable Energy Lab. (NREL), Golden, CO (United States). Strategic Energy Analysis Center; Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); McKellar, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sabharwall, Piyush [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ruth, Mark [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bragg-Sitton, Shannon [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-11-01

The industrial sector was the third-largest source of direct U.S. greenhouse gas (GHG) emissions in 2014 behind electricity generation and transportation and accounted for roughly 20% of total emissions (EPA 2016). The Energy Information Administration (EIA) projects that total U.S. energy consumption will grow to about 108 exajoules (1 EJ = 10¹⁸ J) or 102 quads (1 quad = 10¹⁵ British thermal units) in 2025, with nearly all of the growth coming from the industrial sector (DOE 2015b). Energy consumption in the industrial sector is forecast to increase to 39.5 EJ (37.4 quads)—a 22% increase, exceeding 36% of total energy consumption in the United States. Therefore, it is imperative that industrial GHG emissions be considered in any strategy intent on achieving deep decarbonization of the energy sector as a whole. It is important to note that unlike the transportation sector and electrical grid, energy use by industry often involves direct conversion of primary energy sources to thermal and electrical energy at the point of consumption. About 52% of U.S. industrial direct GHG emissions are the result of fuel combustion (EPA 2016) to produce hot gases and steam for process heating, process reactions, and process evaporation, concentration, and drying. The heterogeneity and variations in scale of U.S. industry and the complexity of modern industrial firms’ global supply chains are among the sector’s unique challenges to minimizing its GHG emissions. A combination of varied strategies—such as energy efficiency, material efficiency, and switching to low-carbon fuels—can help reduce absolute industrial GHG emissions. This report provides a complement to process-efficiency improvement to consider how clean energy delivery and use by industry could reduce GHG emissions. Specifically, it considers the possibility of replacing fossil-fuel combustion in industry with nuclear (specifically small modular reactors [SMRs]), solar thermal (referred to

THE ANALYSIS OF COMPETITIVENESS IN THE TOURISM SECTOR IN THE ACTUAL CONTEXT OF ECONOMIC CRISIS

Directory of Open Access Journals (Sweden)

Vasile ROBU

2009-06-01

Full Text Available The past few years have witnessed many storms in the Tourism sector. Under the influence of an extremely volatile world economy (financial crisis, commodity and oil price rises, sharp exchange rate fluctuations, increase terrorism acts in several region with tourism potential Tourism demand slowed significantly. Yet, despite the current difficulties, the Tourism sector remains a critical economic sector worldwide and one that provides significant potential for economic growth and development internationally. A growing national Tourism sector contributes to raises national income, employment, and can improve a country's balance of payments. The sector is thus an important driver of growth and prosperity and,  within developing countries, it can play a leading role in poverty reduction. Despite the overall importance of developing the Tourism sector, many obstacles at the national level continue to hinder its development. This analysis aims to serve two purposes. First, we intend to provide useful comparative information for making decisions related to business and tourism development. Second, and more importantly, we hope that the analysis provides an opportunity for the Tourism industry to highlight the obstacles to Tourism competitiveness.

MODEL OF ANALYSIS IN THE ROMANIAN FOOTWEAR INDUSTRY

Directory of Open Access Journals (Sweden)

Dimi OFILEANU

2014-06-01

Full Text Available The aim of this work is to determine the influence that exports of footwear industry have on the turnover of the sector. In the work, a period of 9 years is taken into consideration: from 2004 to 2012, establishing an econometric model of analysis of the connection between the turnover and direct exports of footwear industry in Romania. Based on the analyzed empirical data, the work answers to the following question: what is the influence that exports of footwear industry have on sector’s turnover? In addition to specifying the econometric model which describes the connection between the two variables, we also test the validity of the model and the intensity of the connection between the two variables.

Decomposing Brazilian manufacturing industry dynamics in the mid-2000s: Macroeconomic factors and their sectoral impacts

Directory of Open Access Journals (Sweden)

Edson Paulo Domingues

2017-09-01

Full Text Available The manufacturing industry's loss in participation, phenomena called “deindustrialization”, has been observed for the Brazilian economy for a while and seems to have intensified from mid-2000s. However, the literature has not developed a consistent or integrated analysis of this process. We have used a detailed simulation model to identify how macroeconomic factors (such as exchange rate, labor costs, and household consumption have contributed to manufacturing dynamics. Our results indicate that the macroeconomic scenario explains a large portion of the manufacturing industry's participation loss. The rise in households consumption and investment, important factors in this period, were responsible for dampening of the pressures coming from the currency appreciation and the workforce costs, benefiting some industrial sectors, but not avoiding the manufacturings participation loss. Keywords: Manufacturing, Growth, Development, Simulations, JEL classification: O14, C68, D58

Competitive Strategies in the Luxury Sector: a Qualitative Comparative Analysis on the Fashion Industry

Directory of Open Access Journals (Sweden)

Margherita ANGIONI

2017-07-01

Full Text Available Despite the difficult economic period, companies in luxury sector are showing better results than those in the consumer products market. The objective of this paper is to analyse the competitive strategies in the luxury sector and in particular, in the personal luxury. To this end, we have chosen to study the case of an Italian company (Tod's Group, leader in the personal luxury according to consumers perception. Basing on a theoretical model of competitive strategy, this study shows a comparison with the strategic choices of three main competitors of Tod's, which offer products with similar values (Made in Italy, exclusivity and high craftsmanship; they are listed companies; they derive from a family business and the family still holds the company's control. The analysis highlights the ability of the Tod's Group in valorizing its capabilities and skills, and the ability of the management to exploit the available relational network.

Managerial Accounting as a Conceptual Basis of Integrated Management System in Small Businesses (Kazakhstan's Agro-Industrial Sector

Directory of Open Access Journals (Sweden)

Sandugash M. Tokenova

2015-02-01

Full Text Available The article consideres the modern scientific approaches to the integration of management systems, interpretation of the concepts of managerial accounting and understanding of management and accounting in small businesses. The article presents the main results of the analysis of Kazakhstan's agro-industrial sector problems, ways of their solution, based on international experience and the characteristics of Kazakhstan's small business entity. There is presented the authors' vision of ways to enhance the competitiveness of small farms.

Methodology сomparative statistical analysis of Russian industry based on cluster analysis

Directory of Open Access Journals (Sweden)

Sergey S. Shishulin

2017-01-01

Full Text Available The article is devoted to researching of the possibilities of applying multidimensional statistical analysis in the study of industrial production on the basis of comparing its growth rates and structure with other developed and developing countries of the world. The purpose of this article is to determine the optimal set of statistical methods and the results of their application to industrial production data, which would give the best access to the analysis of the result.Data includes such indicators as output, output, gross value added, the number of employed and other indicators of the system of national accounts and operational business statistics. The objects of observation are the industry of the countrys of the Customs Union, the United States, Japan and Erope in 2005-2015. As the research tool used as the simplest methods of transformation, graphical and tabular visualization of data, and methods of statistical analysis. In particular, based on a specialized software package (SPSS, the main components method, discriminant analysis, hierarchical methods of cluster analysis, Ward’s method and k-means were applied.The application of the method of principal components to the initial data makes it possible to substantially and effectively reduce the initial space of industrial production data. Thus, for example, in analyzing the structure of industrial production, the reduction was from fifteen industries to three basic, well-interpreted factors: the relatively extractive industries (with a low degree of processing, high-tech industries and consumer goods (medium-technology sectors. At the same time, as a result of comparison of the results of application of cluster analysis to the initial data and data obtained on the basis of the principal components method, it was established that clustering industrial production data on the basis of new factors significantly improves the results of clustering.As a result of analyzing the parameters of

FY2000 survey report research and development internationalization in industrial sector among APEC economies

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A survey is conducted and a database is constructed on internationalization of research and development activities in the industrial sectors of APEC (Asia-Pacific Economic Cooperation Conference) countries, namely, on research and development support systems, research and development appropriations, research and development personnel, research VISA granting procedures and control over foreign funds, trends of research and development among private sector businesses, main research and development organizations, evaluation by private sector businesses of the research and development environments of their countries, and the like. Incorporated into the database are Australia, Brunei, Canada, Chile, China, Hong Kong, Indonesia, Japan, Korea, Malaysia, Mexico, New Zealand, Papua New Guinea, Peru, Philippines, Russia, Singapore, Chinese Taipei, Thailand, United States, and Vietnam. The database, compiled for Internet web pages, CD-ROMs, and publications, covers the industrial technology related policies of all the countries and helps understand the research and development systems, and enables access to main research organizations. The database comprises a general section dealing with the background, system constitution, and internationalization trend and a countries section collecting information on the respective countries. (NEDO)

Energy and Water Consumption End-Use Survey in Commercial and Industrial Sectors in Georgia

Data.gov (United States)

US Agency for International Development — The objective of survey was to collect statistical energy and water end-use data for commercial and industrial sectors. The survey identified volumes of energy and...

Leading sector development in Muaro Jambi District

Directory of Open Access Journals (Sweden)

Muhammad Safri

2017-09-01

Full Text Available Efforts to improve economic development and economic growth of Muaro Jambi Regency is a must. Efforts to increase economic development and economic growth can occur, if local governments are able to determine or identify priority sectors or become a base sector. Given the importance of determining and defining the right and correct strategy in the development of leading economic sectors/bases, it is necessary to conduct further study related to the development of leading sector policy in Muaro Jambi Regency. Analysis tools that are used are LQ (Location Quotient and SWOT analysis. The results of the analysis found that of there are three sectors that are the main sector or base in Muaro Jambi Regency, namely agriculture, livestock, plantation, fishery and forestry sector, mining and quarrying sector and manufacturing industry sector. Strategies that can be done in order to maintain and develop the sector and sub-sectors/recommended base there are several alternative strategies that combine internal environmental conditions and external environment Muaro Jambi Regency is S - O (power against opportunities, S - T (power against threats W - O (weakness to opportunity and W - T (weakness to threat. Keywords: Location Quotient, SWOT Analysis, Base Sector

Ratio analysis and Piotroski scoring system in the automobile industry in Croatia

Directory of Open Access Journals (Sweden)

Morana Mesarić

2014-10-01

Full Text Available To gain insight into operational efficiency, sustainable profitability, the ability to fulfil commitments, use of funds borrowed or investment risk or operational self-sufficiency, it is necessary to conduct analyses of financial statements usually known as ratio analysis. The paper provides analyses of five Croatian general distributors of the automobile industry. Ratios used in the analyses are those used in the Piotroski f-scoring analyses, which are famous for assessing financial capacities of enterprises on the stock exchange market. Based on ratios used in Piotroski scoring systems the assessment of five enterprises, as well as the sector as a whole was carried out. The analysis covers the period 2007-2012. That is the period of the rise, falling and recovery of the automotive industry throughout the world as well as the rise, falling and recession of the whole economy including the automobile market. In general, the sector itself is financially unstable and consequently risk exposed. Results are used for preliminary analyses and prediction of the future financial strength of the auto industry in Croatia.

An analysis of the Dutch service sector. Energy consumption and trends

International Nuclear Information System (INIS)

Ramirez, A.; Patel, M.; Blok, K.

2002-09-01

Energy efficiency and its implications for a decrease in carbon dioxide emissions have been a main force behind the current debate on energy issues. Until now, the attention of policy-makers and scientists has been mainly focused on the industrial and residential sectors, although the transport sector has gained relevance in the fast few years. The service sector, on the other hand, has remained at the bottom of the priority list. The main goal of this paper is to explore patterns of energy consumption and energy intensity in the Dutch service sector in the last 15 years. This paper is divided into two parts. The first part deals with developments for the whole sector, including a decomposition analysis, and the second part analyses sectoral developments for five sub-sectors: Wholesale and retail trade, hotels and restaurants; Financial institutes; Real estate renting and business activities; Education and Hospitals. At the aggregate level we have found a strong increase in energy consumption, especially in electricity. Furthermore, we found no evidence of significant decrease in energy intensity in the last decade. Furthermore, the decomposition analysis showed that (a) the activity effect (value added) has been the main driving force behind the increase of energy consumption of the service sector, (b) an increase in labour intensity has also boosted energy consumption and (c) energy intensity (in terms of energy per employee) did not have a significant role on decreasing energy use. At the subsectoral level the picture is blurred, especially due to the lack of good quality data. With exception of the sector Real estate renting and business activities which showed a decrease in energy intensity of about 20% between 1993 and 1999, the decrease in energy intensity is quite low. Hence, the results point towards a failure of actual energy policies to address the service sector. This is in contrast to the fact that, due to the high share of electricity consumption and

The analysis of aspects of food industry competitiveness in Serbia

Directory of Open Access Journals (Sweden)

Bešić Cariša

2014-01-01

Full Text Available Competitive ability of the company in modern business conditions is difficult to achieve and easy to lose. The reason for this attitude is the fact that the rapid technological improvement enabled the technology with becoming available to everyone in the world under reasonable terms. Competitiveness of domestic companies is very low. Insufficient application of knowledge, low technological level of enterprises, unproductiveness and inefficiency are just part of the problem. Food industry in Serbia shares the fate of domestic economy - non-competitiveness is one of the main factors which affect the crisis in agricultural sector. The authors of this paper, based on the available national and international statistical data, have done analysis and display of competitive opportunities of domestic economy in general and in particular sectors of food industry. The authors also indicate the possibility of improving competitiveness.

Sectoral patterns versus firm-level heterogeneity - The dynamics of eco-innovation strategies in the automotive sector

DEFF Research Database (Denmark)

Faria, Lourenco; Andersen, Maj Munch

2017-01-01

analysis using patent data from 1965 to 2012. Our findings suggest a process of co-evolution of firms' strategies and indicate that strong sectoral-specific patterns of eco-innovation are present in this sector from the mid-2000s onwards. For fuel cells technologies, however, we observe the formation......This paper sheds light on some important but underestimated elements of green industrial dynamics: the evolution of firms' eco-innovation strategies and activities within a sector. While eco-innovation sectoral case studies have taken place before, our analysis is distinct in investigating the rate......, direction and extent of eco-innovation in the automotive sector, represented here by the main automakers, in order to identify possibly sectoral-specific patterns in firms' strategies, as opposed to divergent strategic behaviors, grounded on evolutionary economic theory. We conduct a two-step empirical...

Review of US ESCO industry market trends: an empirical analysis of project data

Energy Technology Data Exchange (ETDEWEB)

Goldman, C.A.; Hopper, N.C.; Osborn, J.G. [Lawrence Berkeley National Laboratory, Berkeley, CA (United States). Energy Analysis

2005-02-01

This comprehensive empirical analysis of US energy service company (ESCO) industry trends and performance employs two parallel analytical approaches: a survey of firms to estimate total industry size, and a database of {approx}1500 ESCO projects, from which we report target markets and typical project characteristics, energy savings and customer economics. We estimate that industry investment for energy-efficiency related services reached US$2 billion in 2000 following a decade of strong growth. ESCO activity is concentrated in states with high economic activity and strong policy support. Typical projects save 150-200 MJ/m{sup 2}/year and are cost-effective with median benefit/cost ratios of 1.6 and 2.1 for institutional and private sector projects. The median simple payback time (SPT) is 7 years among institutional customers; 3 years is typical in the private sector. Reliance on DSM incentives has decreased since 1995. Preliminary evidence suggests that state enabling policies have boosted the industry in medium-sized states. ECSOs have proven resilient in the face of restructuring and will probably shift toward selling 'energy solutions', with energy efficiency part of a package. We conclude that appropriate policy support - both financial and non-financial - can 'jump-start' a viable private-sector energy-efficiency services industry that targets large institutional and commercial/industrial customers. (author)

A multi-regional structural path analysis of the energy supply chain in China's construction industry

International Nuclear Information System (INIS)

Hong, Jingke; Shen, Qiping; Xue, Fan

2016-01-01

The construction industry in China exerts significant environmental impacts and uses considerable resources because of rapid urbanization. This study conducted a structural path analysis (SPA) based on the multi-regional input–output table to quantify environmental impact transmission in the entire supply chain. Results indicated that the direct resource input (the first stage) along with on-site construction (the zeroth stage) consumed the highest amount of energy in the supply chain and accounted for approximately 50% of total energy consumption. Regional analysis showed that energy consumption in the construction industry at the provincial level was self-sufficient. Sectoral analysis demonstrated that the direct inputs from the sectors of “manufacture of non-metallic mineral products” and “smelting and pressing of metals” generated the most important energy flows, whereas the sectors of “production and distribution of electric power and heat power” and “extraction of petroleum and natural gas” significantly but indirectly influenced energy use. Sensitivity analysis exhibited that the system boundary of SPA could be narrowed down into the first two upstream stages that contained nearly 50% of energy flow information or expanded toward the first five upstream stages that represented 80% of total energy consumption. - Highlights: •We designed an optimized algorithm for multi-regional SPA. •We extracted energy-intensive paths throughout the upstream supply chain. •We explored self-sufficiency characteristic for provincial construction industries. •We identified energy-intensive sectors hidden in higher-order supply chain. •We developed an effective strategy for narrowing down the system boundary of SPA.

Decomposition analysis of gas consumption in the residential sector in Ireland

International Nuclear Information System (INIS)

Rogan, Fionn; Cahill, Caiman J.; Ó Gallachóir, Brian P.

2012-01-01

To-date, decomposition analysis has been widely used at the macro-economic level and for in-depth analyses of the industry and transport sectors; however, its application in the residential sector has been rare. This paper uses the Log-Mean Divisia Index I (LMDI-I) methodology to decompose gas consumption trends in the gas-connected residential sector in Ireland from 1990 to 2008, which despite an increasing number of energy efficiency policies, experienced total final consumption growth of 470%. The analysis decomposes this change in gas consumption into a number of effects, examining the impact over time of market factors such as a growing customer base, varying mix of dwelling types, changing share of vacant dwellings, changing size of new dwellings, the impact of building regulations policy and other factors such as the weather. The analysis finds the most significant effects are changing customer numbers and changing intensity; the analysis also quantifies the impact of building regulations and compares it with other effects such as changing size of new dwellings. By comparing the historical impact on gas consumption of policy factors and non-policy factors, this paper highlights the challenge for policy-makers in achieving overall energy consumption reduction. - Highlights: ► Contribution to a gap in the literature with a residential sector decomposition analysis of gas TFC. ► Activity effect had the largest impact and was cumulatively the best explainer of total TFC change. ► Intensity effect was the second biggest effect with a 19% share of total TFC change. ► In line with rising surface temperatures, the weather effect is declining over time. ► Building regulations are having a diminishing impact but are being negated by larger dwellings.

Top of the food chain: Product services in the food industry

OpenAIRE

Dixon, Andrew M.; Simon, Matthew

2001-01-01

This paper aims to describe the environmental impact of the food industry supply chain and explore the potential for new product-service systems in the food sector, which has not been subject to a great deal of eco-design research. Data from a cross-sector analysis of UK industry, concentrating on the sectors representing the food industry supply chain, is utilised. These sectors are agriculture, food processing, retailing, food services, and kitchen equipment. The analysis combines economic ...

ANALYSIS OF THE STATE OF THE LEADING SECTORS OF THE ECONOMY IN DONBAS FOR THE OLD INDUSTRIAL REGION – SUMMER-AUTUMN OF 2014

Directory of Open Access Journals (Sweden)

Elena Кlymenko

2017-09-01

Full Text Available The purpose of the article is to study the state of the regional industrial complex of the old industrial region of the East of Ukraine, which suffered as a result of the military-political conflict that began in 2014. One of the objectives of the study is to analyse the process of destroying the foundations of the regional economy, as well as to assess the significance of the loss of Donbas industries for the stable socio-economic development of all regions of Ukraine. Methodology. The method of analysis made it possible to study the process of destruction of industrial enterprises in the basic sectors of the regional economy of Donbas since the beginning of the military-political conflict. The author defined the schemes of the operation of a part of enterprises operating in the temporarily occupied territory of the East of Ukraine, who, becoming hostages to the situation, were forced to cooperate with representatives of the illegal authorities of the unrecognized republics to preserve production. Result. The statistical method is used to analyse the financial and economic performance of industrial enterprises, with the purpose of assessing their role in the state economy of the country as a whole. The method of system analysis allowed the author to estimate the damage caused by the loss in the state economy of coal supplies, which was previously mined in the mines of Donbas. Thus, the fact of a decrease in industrial production in the east of the country was argued, which led to a significant drop in Ukraine’s exports in general in such areas as supplies of ferrous metals, engineering products, and non-ferrous metallurgy. Practical implication. The author analysed the facts of loss, as a result of dismantling and export of equipment, strategically important enterprises of the militaryindustrial complex of the country. The article reflects the problem of the growing ecological danger that has arisen as a result of the lack of control over the

Disclosure of immobilized assets on companies sector industrial goods of BM&FBovespa

Directory of Open Access Journals (Sweden)

Sueli Viviani

2014-12-01

Full Text Available The study examined the process of disclosure of Industrials companies listed on the BM&FBovespa, after the convergence of Brazilian accounting to IFRS, in accordance with CPC 27 - Fixed Assets . Was carried a descriptive study, conducted through content analysis and quantitative approach using the calculation of entropy proposed by Zeleny (1982. The sample consists of 34 companies in the Industrial Goods sector listed on the BM&FBovespa. The results revealed that the disclosure of items of fixed assets is not performed homogeneously by companies. Some requirements required by CPC 27 were reported incompletely or are absent. A detailed analysis of the items investigated stressed that disclosure to class of fixed assets, was the best performed, followed by depreciation policies adopted by companies, it was observed that most companies show so complete this information. The information highlighted regarding the reconciliation of the carrying amount, had higher entropy, hence there is greater heterogeneity in this items reported. The disclosure of other information about the property, deemed necessary by CPC27, were less prominent by the companies, not apply in some cases or for being absent in the notes. In general, we concluded that the analyzed companies have been responding only partially to the disclosure requirements of CPC 27. However, the basic and more important information to the external user, concerning the class of assets and depreciation rates are being shown.

Job retention in the British offshore sector through greening of the North Sea energy industry

International Nuclear Information System (INIS)

Esteban, Miguel; Leary, David; Zhang, Qi; Utama, Agya; Tezuka, Tetsuo; Ishihara, Keiichi N.

2011-01-01

For the case of the UK there are currently three ways of obtaining energy from sea areas, namely from wind, tides and waves. A methodology was developed to determine the future size of the offshore renewable industry based on the concept of employment factor, or the number of people required to maintain each unit of electricity production. An assessment was made of the decline in the number of people employed in oil related jobs in the North Sea and the gap that this could create in the UK's economy unless this pool of offshore expertise could find an alternative employment in the renewable sector. The paper will also investigate the effect of gradually transforming the UK's oil and gas sector into offshore renewables. If this was to happen by 2050 the UK offshore renewable industry could produce between 127 and 146 TWh of electricity, equivalent to around 57-66% of the current energy consumption in the country. - Research highlights: → There are three possible sources of energy from sea areas in the UK: wind, tide and waves. → As the number of jobs in the offshore oil industry reduces they should be compensated with jobs in the renewable offshore sector. → By 2050 the UK offshore renewable industry could produce between 127 and 146TWh of electricity. → This would represent around 57-66% of the current energy consumption in the UK.

Strategies for reconciling environmental goals, productivity improvement, and increased energy efficiency in the industrial sector: Analytic framework

Energy Technology Data Exchange (ETDEWEB)

Boyd, G.A.

1995-06-01

The project is motivated by recommendations that were made by industry in a number of different forums: the Industry Workshop of the White House Conference on Climate Change, and more recently, industry consultations for EPAct Section 131(c) and Section 160(b). These recommendations were related to reconciling conflicts in environmental goals, productivity improvements and increased energy efficiency in the industrial sector.

Economic Drought Impact on Agriculture: analysis of all agricultural sectors affected

Science.gov (United States)

Gil, M.; Garrido, A.; Hernández-Mora, N.

2012-04-01

The analysis of drought impacts is essential to define efficient and sustainable management and mitigation. In this paper we present a detailed analysis of the impacts of the 2004-2008 drought in the agricultural sector in the Ebro river basin (Spain). An econometric model is applied in order to determine the magnitude of the economic loss attributable to water scarcity. Both the direct impacts of drought on agricultural productivity and the indirect impacts of drought on agricultural employment and agroindustry in the Ebro basin are evaluated. The econometric model measures losses in the economic value of irrigated and rainfed agricultural production, of agricultural employment and of Gross Value Added both from the agricultural sector and the agro-industrial sector. The explanatory variables include an index of water availability (reservoir storage levels for irrigated agriculture and accumulated rainfall for rainfed agriculture), a price index representative of the mix of crops grown in each region, and a time variable. The model allows for differentiating the impacts due to water scarcity from other sources of economic losses. Results show how the impacts diminish as we approach the macro-economic indicators from those directly dependent on water abstractions and precipitation. Sectors directly dependent on water are the most affected with identifiable economic losses resulting from the lack of water. From the management perspective implications of these findings are key to develop mitigation measures to reduce drought risk exposure. These results suggest that more open agricultural markets, and wider and more flexible procurement strategies of the agro-industry reduces the socio-economic exposure to drought cycles. This paper presents the results of research conducted under PREEMPT project (Policy relevant assessment of the socioeconomic effects of droughts and floods, ECHO - grant agreement # 070401/2010/579119/SUB/C4), which constitutes an effort to provide

The political economy of the fisheries sector in Uganda: ruling elites, implementation costs and industry interests

DEFF Research Database (Denmark)

Kjær, Anne Mette; Muhumuza, Fred; Mwebaze, Tom

This paper sets out to explain policies, implementation arrangements and results (PIRs) in Uganda’s fisheries sector. Industry actors wanted to be able to keep up with European standards in order to survive in the chilled and frozen fillet export industry. They put pressure on ruling elites...

The energy rebound effects across China’s industrial sectors: An output distance function approach

International Nuclear Information System (INIS)

Li, Ke; Zhang, Ning; Liu, Yanchu

2016-01-01

Highlights: • Output distance function for the energy rebound effect is developed. • The aggregate energy rebound effect of China is 88.42%. • Investment-driven economic growth is not conducive to energy-saving. - Abstract: Improving energy efficiency sustainability is a target of the Chinese government. However, the effectiveness of energy conservation policy is affected by the energy rebound effect under which energy efficiency improvement reduces the effective price of energy services, thereby completely or partially offsetting the energy saved by efficiency improvement. Based on the output distance function, this paper develops an improved estimation model of the energy rebound effect, which is logically consistent with the quantities of energy savings and energy rebounds induced by technological progress. Results show that the aggregate energy rebound effect of 36 industrial sectors in China over 1998–2011 is 88.42%, which implies that most of the expected energy savings are mitigated. Investment-driven economic growth is not conducive to energy-saving and results in a strong energy rebound effect in the following year. The equipment and high-end manufacturing sectors have low levels of rebound effect, indicating that increasing the proportion of such firms in the total manufacturing sector can improve the performance of energy conservation. The high level and heterogeneity in rebound effects strongly suggest that varies strategies are necessary for energy conservation among China’s industrial sectors.

Multi-perspective comparisons and mitigation implications of SO2 and NO x discharges from the industrial sector of China: a decomposition analysis.

Science.gov (United States)

Jia, Junsong; Gong, Zhihai; Gu, Zhongyu; Chen, Chundi; Xie, Dongming

2018-04-01

This study is the first attempt to investigate the drivers of Chinese industrial SO 2 and NO x emissions from both periodic and structural perspectives through a decomposition analysis using the logarithmic mean Divisia index (LMDI). The two pollutants' emissions were decomposed into output effects, structural effects, clean production effects, and pollution abatement effects. The results showed that China's industrial SO 2 discharge increased by 1.14 Mt during 2003-2014, and the contributions from the four effects were 23.17, - 1.88, - 3.80, and - 16.36 Mt, respectively. Likewise, NO x discharge changed by - 3.44 Mt over 2011-2014, and the corresponding contributions from the four effects were 2.97, - 0.62, - 1.84, and - 3.95 Mt. Thus, the output effect was mainly responsible for the growth of the two discharges. The average annual contribution rates of SO 2 and NO x from output were 14.33 and 5.97%, respectively, but pollution abatement technology presented the most obvious mitigating effects (- 10.11 and - 7.92%), followed by the mitigating effects of clean production technology (- 2.35 and - 3.7%), and the mitigation from the structural effect was the weakest (- 1.16 and - 1.25%, respectively), which meant pollutant reduction policies related to industrial structure adjustment should be a long-term measure for the two discharges. In addition, the sub-sectors of I20 (manufacture of raw chemical materials and chemical products), I24 (manufacture of non-metallic mineral products), and I26 (smelting and pressing of non-ferrous metals) were the major contributors to both discharges. Thus, these sub-sectors should be given priority consideration when designing mitigation-related measures. Last, some particular policy implications were recommended for reducing the two discharges, including that the government should seek a technological discharge reduction route.

Statistical analysis of incidents reported in the Greek Petrochemical Industry for the period 1997-2003

International Nuclear Information System (INIS)

Konstandinidou, Myrto; Nivolianitou, Zoe; Markatos, Nikolaos; Kiranoudis, Chris

2006-01-01

This paper makes an analysis of all reported accidents and incidents in the Greek Petrochemical Industry for the period spanning from 1997 to 2003. The work performed is related to the analysis of important parameters of the incidents, their inclusion in a database adequately designed for the purposes of this analysis and an importance assessment of this reporting scheme. Indeed, various stakeholders have highlighted the importance of a reporting system for industrial accidents and incidents. The European Union has established for this purpose the Major Accident Reporting System (MARS) for the reporting of major accidents in the Member States. However, major accidents are not the only measure that can characterize the safety status of an establishment; neither are the former the only events from which important lessons can be learned. Near misses, industrial incidents without major consequences, as well as occupational accidents could equally supply with important findings the interested analyst, while statistical analysis of these incidents could give significant insight in the understanding and the prevention of similar incidents or major accidents in the future. This analysis could be more significant, if each industrial sector was separately analyzed, as the authors do for the petrochemical sector in the present article

Economic efficiency evaluation of merges and acquisitions in the sector of industry based on nonlinear model of synergistical growth of an industrial corporation value

Directory of Open Access Journals (Sweden)

Ivanov A.E.

2017-01-01

Full Text Available Numerous research works of the end of the 20th and of the beginning of the 21st century prove that the synergistic effect often declared as the main goal of merges and acquisitions is not generated in fact. This is due to imperfection of the available methodology of its economic evaluation that does not take into account a nonlinear nature of the pooled corporation development. The article suggests a methodology of economic efficiency evaluation of merges and acquisitions in the sector of industry based on identification of synergistically successful acquisition order parameters. These are synergistic effects that with minimal investments in their achievement lead to a disproportionate increase in the value of an industrial corporation. A mathematical model has been created simulating the influence of these investments on the value of an industrial corporation. The model allows one to increase the degree of the decisions validity in merges and acquisitions in the sector of industry.

Identifying Opportunities and Impacts of Fuel Switching in the Industrial Sector

Energy Technology Data Exchange (ETDEWEB)

Jain, Ramesh C. [Industrial Technologies Program, Washington, DC (United States); Jamison, Keith [Energetics Inc., Columbia, MD (United States); Thomas, Daniel E. [Energetics Inc., Columbia, MD (United States)

2006-08-01

The underlying purpose of this white paper is to examine fuel switching opportunities in the U.S. industrial sector and make strategic recommendations—leading to application of the best available technologies and development of new technologies—that will introduce fuel use flexibility as an economically feasible option for plant operators, as a means to condition local fuel demands and a hedge against the local rises in fuel prices.

Comparative Analysis of Sectoral Innovation System and Diamond Model: The Case of Telecom Sector of Iran

Directory of Open Access Journals (Sweden)

Mohammad Hosein Rezazadeh Mehrizi

2008-08-01

Full Text Available Porter’s model of Competitive advantage of nations (named as Diamond Model has been widely used and criticized as well, over recent two decades. On the other hand, non-mainstream economists have tried to propose new frameworks for industrial analysis, that among them, Sectoral Innovation System (SIS is one of the most influential ones. After proposing an assessment framework, we use this framework to compare SIS and Porter’s models and apply them to the case of second mobile operator in Iran. Briefly, SIS model sheds light on the innovation process and competence building and focuses on system failures that are of special importance in the context of developing countries, while Diamond model has the advantage of brining the production process and the influential role of government into focus, but each one has its own shortcomings for analyzing industrial development in developing countries and both of them fail to pay enough attention to foreign relations and international linkages.

Decomposition Analysis of Wastewater Pollutant Discharges in Industrial Sectors of China (2001–2009 Using the LMDI I Method

Directory of Open Access Journals (Sweden)

Beidou Xi

2012-06-01

Full Text Available China’s industry accounts for 46.8% of the national Gross Domestic Product (GDP and plays an important strategic role in its economic growth. On the other hand, industrial wastewater is also the major source of water pollution. In order to examine the relationship between the underlying driving forces and various environmental indicators, values of two critical industrial wastewater pollutant discharge parameters (Chemical Oxygen Demand (COD and ammonia nitrogen (NH₄-N, between 2001 and 2009, were decomposed into three factors: i.e., production effects (caused by change in the scale of economic activity, structure effects (caused by change in economic structure and intensity effects (caused by change in technological level of each sector, using additive version of the Logarithmic Mean Divisia Index (LMDI I decomposition method. Results showed that: (1 the average annual effect of COD discharges in China was −2.99%, whereas the production effect, the structure effect, and the intensity effect were 14.64%, −1.39%, and −16.24%, respectively. Similarly, the average effect of NH₄-N discharges was −4.03%, while the production effect, the structure effect, and the intensity effect were 16.18%, −2.88%, and −17.33%, respectively; (2 the production effect was the major factor responsible for the increase in COD and NH₄-N discharges, accounting for 45% and 44% of the total contribution, respectively; (3 the intensity effect, which accounted for 50% and 48% of the total contribution, respectively, exerted a dominant decremental effect on COD and NH₄-N discharges; intensity effect was further decomposed into cleaner production effect and pollution abatement effect with the cleaner production effect accounting for 60% and 55% of the reduction of COD and NH₄-N, respectively; (4 the major contributors to incremental COD and NH₄-N discharges were divided among industrial sub-sectors

ANALYSIS OF INTER SECTORAL LINKAGES IN SEMARANG REGENCY

Directory of Open Access Journals (Sweden)

Fafurida

2014-03-01

Full Text Available This research aims to analyze inter economic sectoral linkages and to arrange the Klassen typology of economic sectors in Semarang Regency. The Klassen typology is composed from the result of the linkage analysis. To construct the analysis, this paper also utulizes the input-output analysis. It finds that service sector has the highest backward linkage while farming sector has the highest forward linkage. Based on the Klassen typology analysis, sectors with the highest backward and forward linkages and potential to be the leading sector are farming sector, dan trade, hotel and restaurant sector.Keywords: Backward linkage,forward linkage, Klassen typologyJEL classification number: R15, O21AbstrakPenelitian ini bertujuan untuk mengkaji seberapa besar keterkaitan antar sektor ekonomi di Kabupaten Semarang dan memetakan tipologi Klassennya. Tipologi Klasen disusun berdasarkan hasil perhitungan analisis keterkaitannya. Untuk menyusun analisis tersebut, paper ini juga menggunakan analisis input-output. Hasil penelitian menunjukkan bahwa sektor jasa memiliki keterkaitan ke belakang tertinggi dibandingkan dengan sektor lainnya. Sementara itu, sektor pertanian merupakan sektor yang memiliki keterkaitan ke depan tertinggi. Berdasarkan hasil analisis tipologi Klassen, sektor yang memiliki keterkaitan ke depan dan ke belakang yang tinggi dan dapat menjadi sektor unggulan adalah sektor perdagangan, hotel dan sektor restoran.Kata kunci: Keterkaitan ke belakang, keterkaitan ke depan, tipologi KlassenJEL classification numbers: R15, O21

LMDI decomposition analysis of greenhouse gas emissions in the Korean manufacturing sector

International Nuclear Information System (INIS)

Jeong, Kyonghwa; Kim, Suyi

2013-01-01

In this article, we decomposed Korean industrial manufacturing greenhouse gas (GHG) emissions using the log mean Divisia index (LMDI) method, both multiplicatively and additively. Changes in industrial CO 2 emissions from 1991 to 2009 may be studied by quantifying the contributions from changes in five different factors: overall industrial activity (activity effect), industrial activity mix (structure effect), sectoral energy intensity (intensity effect), sectoral energy mix (energy-mix effect) and CO 2 emission factors (emission-factor effect). The results indicate that the structure effect and intensity effect played roles in reducing GHG emissions, and the structure effect played a bigger role than the intensity effect. The energy-mix effect increased GHG emissions, and the emission-factor effect decreased GHG emissions. The time series analysis indicates that the GHG emission pattern was changed before and after the International Monetary Fund (IMF) regime in Korea. The structure effect and the intensity effect had contributed more in emission reductions after rather than before the IMF regime in Korea. The structure effect and intensity effect have been stimulated since the high oil price period after 2001. - Highlights: • We decomposed greenhouse gas emissions of Korea's manufacturing industry using LMDI. • The structure effect and intensity effect play a role in reducing GHG emissions. • The role of structure effect was bigger than intensity effect. • The energy-mix effect increased and the emission-factor effect decreased GHG emissions. • The GHG emission pattern has been changed before and after IMF regime in Korea

Exploration, analysis and explanation of 'employee satisfaction' as an organization development and general improvement tool for the it sector of Pakistan

International Nuclear Information System (INIS)

Ahsan, A.; Kiani, H.S.; Khurshid, O.

2011-01-01

Pakistan's IT industry is currently one of the top performers as compared to other industrial sectors within Pakistan. As per the findings of Ahsan (2008), despite the fact that Pakistan's IT industry is competitive (with respect to other industries within Pakistan), its true potential is yet to be unfolded. Ahsan (2008); states that Pakistan's so called competitive IT industry has to be in lined with the international performers (Particularly South Asian economies). A simple proof of this statement can be obtained from the fact that Pakistan's general economy is 1/5 of Indian economy. This must be true for IT sector of both the economies, which, unfortunately is not the case because Pakistan's IT sector is currently 1/27 of the Indian IT Sector. Ahsan (2008) believes that partial reason of this unwanted difference may be revenue models, business practices and political situations of the two countries. Other than these reasons Ahsan (2008) believes that several soft issues are also responsible for this industrial difference. Out of these soft issues 'motivation' is one such important factor. The role of motivation as an imperative soft issue for revitalizing workforce can also be reproduced for the discussion concerning the role of 'basic employee satisfaction' as an organisation's productivity and quality enhancement tool. Employees, being an integral asset of the organizations, impact organizations in accomplishment of their objectives. The impact of employee satisfaction in software industry of Pakistan is relatively less known but plays significant role. This paper analyzes the major causes of employee satisfaction and the impact of employee satisfaction on quality and productivity dimensions (particularly) in the IT organizations in Pakistan. This research presents analysis of 'Employee Satisfaction' for IT sector of Pakistan. The study not only explores but also presents detailed explanation and analysis of the subject area for the IT industry of Pakistan by

Risk analysis in the chemical industry; Analisis de riesgos en la industria quimica

Energy Technology Data Exchange (ETDEWEB)

Rea Soto, Rogelio; Sandoval Valenzuela, Salvador [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2000-07-01

The Instituto de Investigaciones Electricas has a group of risk analysis (GAR), specialized in the most advanced methodologies to apply them in diverse industries of the productive sector, such as the nuclear, the oil and the chemical industries. In this work the integrated methodology that the GAR uses to make risk analysis in the chemical and oil industries is described. These analyses have as an objective to make a meticulous evaluation of the system design, the operation practices, the maintenance and inspection policies and the emergency plans. [Spanish] El Instituto de Investigaciones Electricas cuenta con un grupo de analisis de riesgo (GAR), especializado en las metodologias mas avanzadas para aplicarlas en diversas industrias del sector productivo, como lo son la nuclear, la petrolera y la quimica. En este trabajo se describe la metodologia integrada que el GAR utiliza para realizar analisis de riesgos en las industrias quimica y petrolera. Estos analisis tienen como objetivo realizar una minuciosa evaluacion del diseno del sistema, las practicas de operacion, las politicas de mantenimiento e inspeccion y los planes de emergencia.

Measuring service quality and a comparative analysis in airline industry

Directory of Open Access Journals (Sweden)

Mohammad Mehdi Izadi

2013-01-01

Full Text Available Quality of services in airline industry plays an important role in market penetration and customer retention. In this paper, we present a factor analysis to find important factors in Iranian Airline industry. The study designs a questionnaire consist of 35 questions and distribute it among 200 customers who regularly use services from 16 different airlines and they are investigated based on the implementation of factor analysis. The results of our survey determines seven important factors including physical features of the environment, Kettering, Pre-flight passenger services, Ability to respond, Reliability, Passenger service flight and Virtual Passenger Services. The paper discusses that improving these seven factors can significantly improve service quality in this sector.

Industry Study, Environment Industry, Spring 2009

Science.gov (United States)

2009-01-01

practices. For example, the cruising sector of the tourism industry has widely- acknowledged negative environmental impacts (carbon emissions and ocean...Services: An Industry Analysis ,” (2009): 4. http://www.berr.gov.uk/files/file50253.pdf 18 Ibid., 5. 19 EBI, 21 20 Department for Business...Ibid., 26. 50 DataMonitor Country Analysis Report, “Korea: In-Depth PESTLE Insights,” (June 2008): 4. 51 EBI, “3000,” 1-22. 52 Ibid., 5-130, 5

Review of U.S. ESCO industry market trends: An empirical analysis of project data

Energy Technology Data Exchange (ETDEWEB)

Goldman, Charles A.; Hopper, Nicole C.; Osborn, Julie G.; Singer, Terry E.

2003-03-01

This article summarizes a comprehensive empirical analysis of U.S. Energy Service Company (ESCO) industry trends and performance. We employ two parallel analytical approaches: a comprehensive survey of firms to estimate total industry size and a database of {approx}1500 ESCO projects, from which we report target markets and typical project characteristics, energy savings and customer economics. We estimate that industry investment for energy-efficiency related services reached US $2 billion in 2000 following a decade of strong growth. ESCO activity is concentrated in states with high economic activity and strong policy support. Typical projects save 150-200 MJ/m2/year and are cost-effective with median benefit/cost ratios of 1.6 and 2.1 for institutional and private sector projects. The median simple payback time is 7 years among institutional customers; 3 years is typical in the private sector. Reliance on DSM incentives has decreased since 1995. Preliminary evidence suggests that state enabling policies have boosted the industry in medium-sized states. ESCOs have proven resilient in the face of restructuring and will probably shift toward selling ''energy solutions,'' with energy efficiency part of a package. We conclude that a private sector energy-efficiency services industry that targets large commercial and industrial customers is viable and self-sustaining with appropriate policy support both financial and non-financial.

The Integration Aspects of Activities of the Companies in the Oil and Gas Industry Sector in the Context of Globalization

Directory of Open Access Journals (Sweden)

Panevnyk Tetiana M.

2016-05-01

Full Text Available The article considers both the dynamics and the structure of oil and gas production in Ukraine, situation of the oil and gas companies at the current stage of globalization of the world economy have been covered. The main problems impacting the functioning of the domestic industry sector have been identified, including the lack of effectiveness of the existing integration processes. The world trends and patterns of integration processes have been considered. It has been determined that the oil and gas industry sector leaders are the multinational companies that actively use integration in their practices. The current trends in creating integration linkages in different parts of the process chain in the oil and gas industry have been identified. Influence by large corporations of the innovative type on the creation of a favorable investment climate has been confirmed, as well as conducting their own policies of expansion in the overseas markets. On the basis of studying the foreign experience, expediency of development of the oil and gas sector enterprises by activating integration processes has been substantiated. Priorities and possibilities for further functioning of enterprises in the the oil and gas industry sector have been identified

Labour Productivity Convergence in 52 Industries: A Panel Data Analysis of Some European Countries

Directory of Open Access Journals (Sweden)

Tahir Mahmood

2012-01-01

Full Text Available Beta convergence and the speed of convergence of labour productivity for 52 industries are studied with a panel of data including 13 European countries. We use fixed effect approach to model the heterogeneity across countries. In primary sector and in service sector, the existence of -convergence is found for all industries. In manufacturing sector, convergence is found for all industries except for electronic and computing equipment industries. In general the speed of convergence estimates show slow adjustment. Speed is highest in the capital intensive industries. In primary production the convergence is slowest in agriculture and fastest in fishing industry. In manufacturing sector the convergence is slowest in food, drink and tobacco, and it is fastest in oil refining and nuclear fuel manufacturing industries. By augmenting the productivity models with labour utilization variable speeds up the convergence. Labour utilization is positively related to productivity growth in primary production industries, ICT producing manufacturing industries, and ICT producing services industries.

Retrospective of CO{sub 2} emissions of the Mexican industrial sector; Retrospectiva de emisiones de CO{sub 2} del sector industrial mexicano

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Domingo; Martinez, Manuel [Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

2006-11-15

The carbon dioxide emissions of the Mexican Industrial Sector throughout the period of 1965-2003 are analyzed, in terms of 16 branches of the industrial economic activity, as it is marked by the proposed disintegration of the Sistema de Cuentas Nacionales of the Intituto Nacional de Estadistica, Geografia e Informatica (INEGI) and the National Balance of Energy 2003 (BNE-2003). The CO{sub 2} emissions by the energy use have a behavior very similar to the one of the consumption of the final energy, which reflects that non significant changes in the composition of used fuels have existed. During this period the CO{sub 2} emissions increased 230%. The industrial branches that have shown significant changes in the CO{sub 2} emission are Construction, Bottled Water, Rubber, Cement, Beer and Malta and Chemistry. In order to evaluate the effects of the Activity, Structure, Power Intensity, fuel Mixture of final use and fuel Mixture used in electricity generation the decomposition model of CO{sub 2} is used based on the Laspeyres index. The calculated effects show that the main increase of total carbon dioxide of the SIM is referred to the Activity with an average rate of annual growth (TMCA) of 4.32%; whereas the effect that mitigates more the CO{sub 2} emission is the one described by the power Intensity and is equivalent to a TMCA of -0.85%. [Spanish] Se analizan las emisiones de bioxido de carbono del Sector Industrial Mexicano a lo largo del periodo de 1965-2003, en termino de 16 ramas de actividad economica industrial como lo marca la desagregacion propuesta por el Sistema de Cuentas Nacionales del Instituto Nacional de Estadistica, Geografia e Informatica (INEGI) y el Balance Nacional de Energia 2003 (BNE-2003). Las emisiones de CO{sub 2} por el uso de energia tienen un comportamiento muy similar al de consumo de energia final, lo que refleja que no han existido cambios significativos en la composicion de los combustibles empleados. Durante este periodo las

Emotional Intelligence and Organisational Citizenship Behaviour of Manufacturing Sector Employees: An Analysis

Directory of Open Access Journals (Sweden)

Susan Tee Suan Chin

2011-06-01

Full Text Available As with diversity, collaboration, co-operation and teamwork havebecome increasingly important issues for management to handle.The purpose of this study is to analyse the level of Emotional Intelligenceand Organisational Citizenship Behaviour among middlemanagement employees in the Malaysian manufacturing sector.A total of 536 employees from different organisations and industriestook part in this survey. Based on the descriptive analysis,employees in some industries tended to have a lower level ofemotional intelligence and organisational citizenship behaviour.

Inventory analysis of the timber industry in Ghana

NARCIS (Netherlands)

Eshun, J.F.; Potting, J.; Leemans, R.

2010-01-01

Background, aim, and scope The timber sector, i.e., forestry and timber industry, plays an important role in the socioeconomic development of Ghana through timber products export. Timber production in this sector is associated with increasing environmental burdens in terms of use of materials and

Assessment of On-Site Power Opportunities in the Industrial Sector; TOPICAL

International Nuclear Information System (INIS)

Bryson, T.

2001-01-01

The purpose of this report is to identify the potential for on-site power generation in the U.S. industrial sector with emphasis on nine industrial groups called the ''Industries of the Future'' (IOFs) by the U.S. Department of Energy (DOE). Through its Office of Industrial Technologies (OIT), the DOE has teamed with the IOFs to develop collaborative strategies for improving productivity, global competitiveness, energy usage and environmental performance. Total purchases for electricity and steam for the IOFs are in excess of$27 billion annually. Energy-related costs are very significant for these industries. The nine industrial groups are: (1) Agriculture (SIC 1); (2) Forest products; (3) Lumber and wood products (SIC 24); (4) Paper and allied products (SIC 26); (5) Mining (SIC 11, 12, 14); (6) Glass (SIC 32); (7) Petroleum (SIC 29); (8) Chemicals (SIC 28); and (9) Metals (SIC 33)-Steel, Aluminum, Metal casting. Although not currently part of the IOF program, the food industry is included in this report because of its close relationship to the agricultural industry and its success with on-site power generation. On-site generation provides an alternative means to reduce energy costs, comply with environmental regulations, and ensure a reliable power supply. On-site generation can ease congestion in the local utility's electric grid. Electric market restructuring is exacerbating the price premium for peak electricity use and for reliability, creating considerable market interest in on-site generation

Effects of financial crisis on the industry sector of Chinese stock market — from a perspective of complex network

Science.gov (United States)

Yang, Chunxia; Chen, Yanhua; Hao, Weiwei; Shen, Ying; Tang, Minxuan; Niu, Lei

2014-05-01

In this paper, we use mutual information to measure the statistical interdependence between 23 industry sectors of Shanghai stock market and construct corresponding correlation network to analyze the shock of 2008 financial crisis on industry sectors. The obtained meaningful facts are as follows. First, such crisis has only a limited impact on leading industries such as Manufacturing, Commercial trade and Machinery & Equipment, which still play an important role in Chinese economy. Second, the crisis badly attacks China's export industries like Electronics, Wood & Furniture and Textile & Clothing. The damage further hurts other industries, and then export industries' influence becomes larger. Third, the crisis adversely impacts the import industries like Petrochemical, Metal & Nonmetal and Pharmaceutical Biotechnology. While due to the stimulation of macroeconomic policies, the influence of crisis on import industries is limited. Similarly, due to relatively strict capital control and the macroeconomic policies stimulating the domestic demand, those industries like Construction, Real Estate and Financial Services are slightly wounded. All these findings suggest that Chinese government should transform from the external demand to the domestic consumption to sustain economic growth.

The Persistence of Abnormal Returns: Analysis of Polish Manufacturing Industry

Directory of Open Access Journals (Sweden)

Marcin Puziak

2017-06-01

Full Text Available The ultimate goal of a company is to build the enterprise value, which is achievable thanks to abnormal profits generated in particular period. Moreover, firms are expected to take measures to maintain abnormal profit in the future. On the other hand, abnormal profits attract competitors, who increase competition and as a result abnormal profits disappear. The persistence of profit is a term that describes a situation, when the company is successful in maintaining the abnormal profit over time. The main aim of this paper is to investigate the persistence of abnormal profit in Polish manufacturing sector. In other words, the question is whether Polish manufacturing companies are able to maintain their abnormal profits over time. The persistence of abnormal profits is investigated using dynamic panel model with generalized method-of-moments estimators. The method is applied to a panel of 5303 Polish companies from manufacturing sector observed over the period 2006-2014. This paper contributes to the existing literature in two ways. First, analysis is performed for developing country. Second, analysis is performed both at the level of entire sector and at division level. Three main conclusions can be drawn from the conducted research: there are significant differences between profit rates within the same industry at division level; estimated persistence of abnormal profit coefficients are at moderate level; there are substantial differences between estimated persistence of profit coefficients for divisions in the same industry.

Analysis of the economic structure of the eating-out sector: The case of Spain.

Science.gov (United States)

Cabiedes-Miragaya, Laura

2017-12-01

The objective of this article is to analyse the structure of the Spanish eating-out sector from an economic point of view, and more specifically, from the supply perspective. This aspect has been studied less than the demand side, almost certainly due to the gaps which exist in available official statistics in Spain, and which have been filled basically with consumer surveys. For this reason, focus is also placed on the economic relevance of the sector and attention is drawn to the serious shortcomings regarding official statistics in this domain, in contrast to the priority that hotel industry statistics have traditionally received in Spain. Based on official statistics, a descriptive analysis was carried out, focused mainly, though not exclusively, on diverse structural aspects of the sector. Special emphasis was placed on issues such as business demography (for instance, number and types of enterprises, survival rates, size distribution, and age structure), market concentration and structure of costs. Among other conclusions, the analysis allowed us to conclude that: part of the sector is more concentrated than it may at first appear to be; the dual structure of the sector described by the literature in relation to other countries is also present in the Spanish case; and the impact of ICTs (Information and Communication Technologies) on the sector are, and will foreseeably continue to be, particularly relevant. The main conclusion of this study refers to the fact that consumers have gained prominence in their contribution to shaping the structure of the sector. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of Petroleum Downstream Industry Potential in Riau Province

Directory of Open Access Journals (Sweden)

Tomi Erfando

2017-06-01

Full Text Available Petroleum downstream industry in Riau Province is still not optimal. The data shows that from 98,892,755 barrels lifting oil each year only 62,050,000 barrels could be processed in refinery unit II Dumai operated by PT Pertamina. There is a potential of 35-40% of downstream industry. Indonesian Government through The Ministry of Energy and Mineral Resources declared the construction of a mini refinery to boost oil processing output in the downstream sector. A feasibility study of development plan mini refinery is needed. The study includes production capacity analysis, product analysis, development & operational refinery  analysis and economic analysis. The results obtained by the mini refinery capacity is planned to process crude oil 6000 BOPD with the products produced are gasoline, kerosene, diesel and oil. Investment cost consist of is capital cost US $ 104419784 and operating cost US $ 13766734 each year with net profit earned US $ 12330063/year and rate of return from investment 11.63%

Ecological network analysis for carbon metabolism of eco-industrial parks: a case study of a typical eco-industrial park in Beijing.

Science.gov (United States)

Lu, Yi; Chen, Bin; Feng, Kuishuang; Hubacek, Klaus

2015-06-16

Energy production and industrial processes are crucial economic sectors accounting for about 62% of greenhouse gas (GHG) emissions globally in 2012. Eco-industrial parks are practical attempts to mitigate GHG emissions through cooperation among businesses and the local community in order to reduce waste and pollution, efficiently share resources, and help with the pursuit of sustainable development. This work developed a framework based on ecological network analysis to trace carbon metabolic processes in eco-industrial parks and applied it to a typical eco-industrial park in Beijing. Our findings show that the entire metabolic system is dominated by supply of primary goods from the external environment and final demand. The more carbon flows through a sector, the more influence it would exert upon the whole system. External environment and energy providers are the most active and dominating part of the carbon metabolic system, which should be the first target to mitigate emissions by increasing efficiencies. The carbon metabolism of the eco-industrial park can be seen as an evolutionary system with high levels of efficiency, but this may come at the expense of larger levels of resilience. This work may provide a useful modeling framework for low-carbon design and management of industrial parks.

The Impact of Energy taxes on Competitiveness and Output: A Panel Regression Study of 56 European Industry Sectors

DEFF Research Database (Denmark)

Enevoldsen, Martin K.; Andersen, Mikael Skou

2008-01-01

The focus of this paper is the extent to which energy taxes - via the resulting increase in real energy prices, or in their own right - reduce or enhance industrial competitiveness. From a panel data set covering 56 industry sectors throughout Europe over the period 1990-2003, we estimate how cha...... changes in real energy taxes and real energy prices affect, on the one hand, competitiveness measured in terms unit energy costs and unit wage costs and, on the other hand, economic performance expressed in terms of output (value added)......The focus of this paper is the extent to which energy taxes - via the resulting increase in real energy prices, or in their own right - reduce or enhance industrial competitiveness. From a panel data set covering 56 industry sectors throughout Europe over the period 1990-2003, we estimate how...

Perceptions of Private Sector towards the Pollutant Release and Transfer Register: A Case Study on Petrochemical Industry in the Map Ta Phut Industrial Estate, Rayong, Thailand

Directory of Open Access Journals (Sweden)

Marie Kondo

2013-01-01

Full Text Available Under the Rio Declaration and Agenda 21 from the United Nations Conference on Environment and Development in 1992 as well as other international agreements, Thailand is currently in the process of adopting the Pollutant Release and Transfer Register (PRTR through a pilot project in Rayong province with assistance from the Japan International Cooperation Agency (JICA. This research aimed to study perceptions of private sector towards the PRTR through a case study on petrochemical industry in the Map Ta Phut Industrial Estate. Through semi-structured questionnaires and in-depth interviews, the study found that the petrochemical industry viewed that benefits of the PRTR for the government and civil society is quite clear, while each petrochemical company has different understanding on such benefit for private sector to be as sustainable industrial management. Various incentive measures and concerns on the PRTR were also indicated in this study.

INDUSTRI KREATIF INDONESIA: PENDEKATAN ANALISIS KINERJA INDUSTRI

Directory of Open Access Journals (Sweden)

Ahmad Kamil

2015-10-01

Full Text Available In 2008, the Department of Commerce of the Republic of Indonesia has launched a creative economic development documents interpreted the 2025 Indonesia became the starting point and guide the development of the creative economy in Indonesia. With the existence of this document, the industry and its stakeholders or other stakeholders can readily develop the creative economy in Indonesia. Economic development in the direction of the creative industries is one manifestation of optimism aspiration to support the Master Plan for the Acceleration and Expansion of Indonesia's Economic Development in realizing the vision of Indonesia are being developed nation. The main objective of this study is the first to analyze the role of the creative industries in Indonesia for labor, value added and productivity, secondly, to analyze the performance trend of the creative industries sector, and third, to analyze the factors affecting the performance of the creative industries sector in Indonesia. Under Indonesia Standard Industrial Classification (ISIC and codes 151-372 (manufacturing industries category identified 18 industry groups belonging to the creative industries, showed that the performance of the national creative industries has been relatively high (in terms of trend analysis of the performance of the industrial creative. Furthermore, regression analysis of panel data (econometrics indicates that company size (SIZE, wages for workers (WAGE and the content of local inputs (LOCAL has a significant impact on the performance of Indonesia's creative industry. Meanwhile, the concentration ratio (CR4 no consequences but have koresi significantly positive effect on the performance of Indonesia’s creative industry.

Multi criteria analysis in the renewable energy industry

CERN Document Server

San Cristóbal Mateo, José Ramón

2012-01-01

Decision makers in the Renewable Energy sector face an increasingly complex social, economic, technological, and environmental scenario in their decision process. Different groups of decision-makers become involved in the process, each group bringing along different criteria therefore, policy formulation for fossil fuel substitution by Renewable Energies must be addressed in a multi-criteria context. Multi Criteria Analysis in the Renewable Energy Industry is a direct response to the increasing interest in the Renewable Energy industry which can be seen as an important remedy to many environmental problems that the world faces today. The multiplicity of criteria and the increasingly complex social, economic, technological, and environmental scenario makes multi-criteria analysis a valuable tool in the decision-making process for fossil fuel substitution. The detailed chapters explore the use of the Multi-criteria decision-making methods and how they provide valuable assistance in reaching equitable and accept...

Sectoral Innovation Watch Food and Drinks Sector. Final Sector Report

NARCIS (Netherlands)

Leis, M.; Gijsbers, G.; Zee, F. van der

2011-01-01

The food and drinks manufacturing industry is a diverse and complex sector. There are ample possibilities for performance improvement and innovation in the food and drinks industry as well as a variety of challenges ranging from a lack of financial and human resources, fragmented consumer interests

Industrial sector-based volatile organic compound (VOC) source profiles measured in manufacturing facilities in the Pearl River Delta, China.

Science.gov (United States)

Zheng, Junyu; Yu, Yufan; Mo, Ziwei; Zhang, Zhou; Wang, Xinming; Yin, Shasha; Peng, Kang; Yang, Yang; Feng, Xiaoqiong; Cai, Huihua

2013-07-01

Industrial sector-based VOC source profiles are reported for the Pearl River Delta (PRD) region, China, based source samples (stack emissions and fugitive emissions) analyzed from sources operating under normal conditions. The industrial sectors considered are printing (letterpress, offset and gravure printing processes), wood furniture coating, shoemaking, paint manufacturing and metal surface coating. More than 250 VOC species were detected following US EPA methods TO-14 and TO-15. The results indicated that benzene and toluene were the major species associated with letterpress printing, while ethyl acetate and isopropyl alcohol were the most abundant compounds of other two printing processes. Acetone and 2-butanone were the major species observed in the shoemaking sector. The source profile patterns were found to be similar for the paint manufacturing, wood furniture coating, and metal surface coating sectors, with aromatics being the most abundant group and oxygenated VOCs (OVOCs) as the second largest contributor in the profiles. While OVOCs were one of the most significant VOC groups detected in these five industrial sectors in the PRD region, they have not been reported in most other source profile studies. Such comparisons with other studies show that there are differences in source profiles for different regions or countries, indicating the importance of developing local source profiles. Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.

Trends in the energy use in the Mexican industrial sector; Tendencias del uso de la energia en el sector industrial mexicano

Energy Technology Data Exchange (ETDEWEB)

Sheinbaum, C. [UNAM, Mexico, D. F. (Mexico); Jauregui, I. [CONAE, Mexico, D. F. (Mexico)

1995-12-31

This paper presents an analysis of the trends of the energy use for the industry in Mexico. For the various industrial branches (mining, construction, chemical, sugar, cement, paper and cellulose and glass) the changes in energy intensity (measured as the use of the energy divided by the aggregated value) and in the participation of the same in the industrial Internal Gross Product are presented. This is developed by means of the analysis of Laspeyress exchange indexes. It is found that in most of the industrial branches a reduction of the energy density has been originated. The reasons for the falling of this indicator are structural and of technological change nature, depending on the industrial branch. Nevertheless the classical analysis of the Laspeyress indexes is not sufficient to explain the changes occurred in the energy intensity in the Mexican industry for the last years. [Espanol] Este articulo presenta un analisis de las tendencias del uso de la energia para la industria en Mexico. Para las diversas ramas industriales (mineria, construccion, quimica, azucar, cemento, papel y celulosa y vidrio) se presentan los cambios en la intensidad energetica (medida como uso de la energia entre valor agregado) y en la participacion de las mismas en el Producto Interno Bruto (PIB) industrial. Esto se desarrolla por medio del analisis de indices de cambio de Laspeyress. Se encuentra que en la mayoria de las ramas industriales hubo una disminucion en la intensidad energetica. Las razones de la caida de este indicador son estructurales y de cambio tecnologico dependiendo de la rama industrial. Sin embargo el analisis clasico de los indices de Laspeyress es insuficiente para explicar los cambios ocurridos en la intensidad energetica de la industria mexicana para los ultimos anos.

Trends in the energy use in the Mexican industrial sector; Tendencias del uso de la energia en el sector industrial mexicano

Energy Technology Data Exchange (ETDEWEB)

Sheinbaum, C [UNAM, Mexico, D. F. (Mexico); Jauregui, I [CONAE, Mexico, D. F. (Mexico)

1996-12-31

This paper presents an analysis of the trends of the energy use for the industry in Mexico. For the various industrial branches (mining, construction, chemical, sugar, cement, paper and cellulose and glass) the changes in energy intensity (measured as the use of the energy divided by the aggregated value) and in the participation of the same in the industrial Internal Gross Product are presented. This is developed by means of the analysis of Laspeyress exchange indexes. It is found that in most of the industrial branches a reduction of the energy density has been originated. The reasons for the falling of this indicator are structural and of technological change nature, depending on the industrial branch. Nevertheless the classical analysis of the Laspeyress indexes is not sufficient to explain the changes occurred in the energy intensity in the Mexican industry for the last years. [Espanol] Este articulo presenta un analisis de las tendencias del uso de la energia para la industria en Mexico. Para las diversas ramas industriales (mineria, construccion, quimica, azucar, cemento, papel y celulosa y vidrio) se presentan los cambios en la intensidad energetica (medida como uso de la energia entre valor agregado) y en la participacion de las mismas en el Producto Interno Bruto (PIB) industrial. Esto se desarrolla por medio del analisis de indices de cambio de Laspeyress. Se encuentra que en la mayoria de las ramas industriales hubo una disminucion en la intensidad energetica. Las razones de la caida de este indicador son estructurales y de cambio tecnologico dependiendo de la rama industrial. Sin embargo el analisis clasico de los indices de Laspeyress es insuficiente para explicar los cambios ocurridos en la intensidad energetica de la industria mexicana para los ultimos anos.

Energy efficiency achievements in China's industrial and transport sectors: How do they rate?

International Nuclear Information System (INIS)

Wu, Libo; Huo, Hong

2014-01-01

China is experiencing intensified industrialisation and motorisation. In the world's largest emerging economy, energy efficiency is expected to play a critical role in the ever-rising demand for energy. Based on factual overviews and numerical analysis, this article carries out an in-depth investigation into the effectiveness of policies announced or implemented in recent decades targeted at energy conservation in the energy intensive manufacturing and transportation sectors. It highlights nine energy intensive sectors that achieved major improvements in their energy technology efficiency efforts. Under the umbrella of the 11th Five-Year Plan, these sectors' performances reflect the effectiveness of China's energy conservation governance. Numerous actions have been taken in China to reduce the road transport sector's demand for energy and its GHG emissions by implementing fuel economy standards, promoting advanced energy efficient vehicles, and alternative fuels. Coal-based energy saving technologies, especially industrial furnace technologies, are critical for China's near and medium-term energy saving. In the long run, renewable energy development and expanding the railway transport system are the most effective ways to reduce energy use and GHG emissions in China. Fuel economy standards could reduce oil consumption and GHGs by 34–35 per cent. - Highlights: • This article makes an investigation into the effectiveness of energy conservation policies in China. • Efficiency improvement reflects the effective governance of energy conservation in China. • Numerous actions have been taken to reduce the road transport sector's demand for energy. • Coal-based energy saving technologies are critical for China's near and medium-term energy saving. • In the long run, renewable energy and expanding the railway transport system are the most effective ways

Technical analysis and economic effect of an industrial initiative in the photovoltaic sector

International Nuclear Information System (INIS)

Ciorba, U.; Pauli, F.; Menna, P.

2001-01-01

In this paper it is assessed the potential economic impact of an industrial initiative in the photovoltaic manufacturing sector, in terms of induced production and job creation, to be implemented in Morocco. This country exhibits indeed a high potential for photovoltaic installations as proved by the relevant number of national and international deployment programs currently underway. Solar electricity generation schemes look very promising for the relevant role they could play in the future, CO2-emission free, world energy scenarios making potentially more appealing the planning of longer-term public investments. In this study, it was described the manufacturing process providing the solar modules as final output and associate to each step of the process the corresponding costs. Then, using input-output method, it was evaluated the economic impact of the production of 5 MWp modules a year under different hypotheses. A production of 5MWp photovoltaic modules, which require an overall investment of Euro 16.3 millions increases gross domestic product of Euro 57.6 millions if cells are locally produced and only of Euro 22.3 millions when the cells are imported, creating 2570 and 489 jobs, respectively. These results outline the importance of availability of inputs in local economical context [it

Job Demands, Job Resources, Burnout, Work Engagement, and Their Relationships: An Analysis Across Sectors.

Science.gov (United States)

Van den Broeck, Anja; Elst, Tinne Vander; Baillien, Elfi; Sercu, Maarten; Schouteden, Martijn; De Witte, Hans; Godderis, Lode

2017-04-01

The aim of this study was to gain insight in the importance of job demands and resources and the validity of the Job Demands Resources Model across sectors. We used one-way analyses of variance to examine mean differences, and multi-group Structural Equation Modeling analyses to test the strength of the relationships among job demands, resources, burnout, and work engagement across the health care, industry, service, and public sector. The four sectors differed in the experience of job demands, resources, burnout, and work engagement, but they did not vary in how (strongly) job demands and resources associated with burnout and work engagement. More attention is needed to decrease burnout and increase work engagement, particularly in industry, service, and the public sector. The Job Demands-Resources model may be helpful in this regard, as it is valid across sectors.

The Energy Footprint of China’s Textile Industry: Perspectives from Decoupling and Decomposition Analysis

Directory of Open Access Journals (Sweden)

Laili Wang

2017-09-01

Full Text Available Energy is the essential input for operations along the industrial manufacturing chain of textiles. China’s textile industry is facing great pressure on energy consumption reduction. This paper presents an analysis of the energy footprint (EFP of China’s textile industry from 1991 to 2015. The relationship between EFP and economic growth in the textile industry was investigated with a decoupling index approach. The logarithmic mean Divisia index approach was applied for decomposition analysis on how changes in key factors influenced the EFP of China’s textile industry. Results showed that the EFP of China’s textile industry increased from 41.1 Mt in 1991 to 99.6 Mt in 2015. EFP increased fastest in the period of 1996–2007, with an average annual increasing rate of 7.7 percent, especially from 2001 to 2007 (8.5 percent. Manufacture of textile sector consumed most (from 58 percent to 76 percent of the energy among the three sub-sectors, as it has lots of energy-intensive procedures. EFP and economic growth were in a relative decoupling state for most years of the researched period. Their relationship showed a clear tendency toward decoupling. Industrial scale was the most important factor that led to the increase of EFP, while decreasing energy intensity contributed significantly to reducing the EFP. The promoting effect of the factors was larger than the inhibiting effect on EFP in most years from 1991 to 2015.

Model documentation report: Industrial sector demand module of the National Energy Modeling System

International Nuclear Information System (INIS)

1997-01-01

This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects. The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2015) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of industrial output. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types

Optimizing Bus Passenger Complaint Service through Big Data Analysis: Systematized Analysis for Improved Public Sector Management

Directory of Open Access Journals (Sweden)

Weng-Kun Liu

2016-12-01

Full Text Available With the advances in industry and commerce, passengers have become more accepting of environmental sustainability issues; thus, more people now choose to travel by bus. Government administration constitutes an important part of bus transportation services as the government gives the right-of-way to transportation companies allowing them to provide services. When these services are of poor quality, passengers may lodge complaints. The increase in consumer awareness and developments in wireless communication technologies have made it possible for passengers to easily and immediately submit complaints about transportation companies to government institutions, which has brought drastic changes to the supply–demand chain comprised of the public sector, transportation companies, and passengers. This study proposed the use of big data analysis technology including systematized case assignment and data visualization to improve management processes in the public sector and optimize customer complaint services. Taichung City, Taiwan, was selected as the research area. There, the customer complaint management process in public sector was improved, effectively solving such issues as station-skipping, allowing the public sector to fully grasp the service level of transportation companies, improving the sustainability of bus operations, and supporting the sustainable development of the public sector–transportation company–passenger supply chain.

Analysis of the use of biomass as an energy alternative for the Portuguese textile dyeing industry

International Nuclear Information System (INIS)

Nunes, L.J.R.; Matias, J.C.O.; Catalão, J.P.S.

2015-01-01

The energy efficiency and the development of environmentally correct policies are current topics, especially when applied to the industrial sector with the objective of increasing the competitiveness of the enterprises. Portuguese textile dyeing sector, being a major consumer sector of primary energy, needs to adopt measures to improve its competitiveness. Biomass appears to be a viable and preferred alternative energy source for the sector, while simultaneously develops an entire forest industry devoted to the supply of forest solid fuels. This work carries out a comprehensive PEST (political, economic, social and technological) analysis, which analyses Political, Economic, Social and Technological aspects of the replacement of the fossil fuels traditionally used in this sector by biomass, providing a framework of environmental factors that influence the strategic management of the companies. The main advantages are the reduction of external dependence on imported fuel due to the use of an endogenous renewable resource, the creation and preservation of jobs, the increased competitiveness of the sector by reducing energy costs, the use of national technology and the reduction of greenhouse gases emissions. - Highlights: • The Portuguese textile dyeing sector, being a major consumer sector of primary energy, is addressed. • Biomass is a viable and preferred alternative energy source for the sector. • A PEST (political, economic, social and technological) analysis is carried out. • The implications of the replacement of fossil fuels with biomass are studied

Key Directions of Sectoral and Spatial Changes in the Russian Industry

Directory of Open Access Journals (Sweden)

Chasovsky Vladimir

2015-09-01

Full Text Available This article considers major trends in the spatial and sectoral structure of national production and analyses the patterns of transformation of industrial systems into integrated industrial complexes, which show higher efficiency in transit condiétions. The author presents a new approach to studying the structural transformation of industrial systems during the transition of the national economy, which will make it possible to identify major trends in national production. The article seeks to draw attention to the methodology of developing and implementing industrial policy and devising an algorithm of effective transition of Russian industries in the modern conditions of international division of labor. The modernization and transnationalization of national production rests on a number of methods that make it possible for the corporate management to react rapidly to changes in the global market situation. These methods include strategic segmentation, analyzing the ability to adapt to the expected conditions, devising a company’s entrepreneurial strategy, and changes in the spatial and industrial structure of production. The transformation of national industry is associated with the introduction of mechanisms of industrial integration structures using single organizational production modules capable of rational combination and transformation of the elements of national production structure to create competitive transnational production associations, such as clusters and other production forms serving as ‘growth poles’ and becoming elements of the emerging framework for national production. This methodology makes it possible to develop new approaches, methods, and principles for analyzing the transformation of the national spatial and industrial system during economic transition. Current factors, features, patterns and trends in the transformation of national industrial systems are identified; a mechanism for devising and implementing a

New Product Development (NPD) Process - An Example of Industrial Sector

Science.gov (United States)

Kazimierska, Marianna; Grębosz-Krawczyk, Magdalena

2017-12-01

This aim of this article is to present the process of new product introduction on example of industrial sector in context of new product development (NPD) concept. In the article, the concept of new product development is discussed and the different stages of the process of new electric motor development are analysed taking into account its objectives, implemented procedures, functions and responsibilities division. In the article, information from secondary sources and the results of empirical research - conducted in an international manufacturing company - are used. The research results show the significance of project leader and regular cooperation with final client in the NPD process.

Analysis of the Potential Impacts on China’s Industrial Structure in Energy Consumption

Directory of Open Access Journals (Sweden)

Yushen Tian

2017-12-01

Full Text Available Industrial structure is one of the main factors that determine energy consumption. Based on China’s energy consumption in 2015 and the goals in 13th Five-Year Plan for Economic and Social Development of the People’s Republic of China (The 13th Five-Year Plan, this paper established an input–output fuzzy multi-objective optimization model to estimate the potential impacts of China’s industrial structure on energy consumption in 2015. Results showed that adjustments to industrial structure could save energy by 19% (1129.17 million ton standard coal equivalent (Mtce. Second, China’s equipment manufacturing industry has a large potential to save energy. Third, the development of several high energy intensive and high carbon intensive sectors needs to be strictly controlled, including Sector 25 (electricity, heat production, and supply industry, Sector 11 (manufacture of paper and stationery, printing, and Sector 14 (non-metallic mineral products industry. Fourth, the territory industry in China has a great potential for energy saving, while its internal structure still needs to be upgraded. Finally, we provide policy suggestions that may be adopted to reduce energy consumption by adjusting China’s industrial structure.

Relationship between technological progress, capital elasticity and emissions of industrial pollutants for the production sectors in Catalonia

International Nuclear Information System (INIS)

Pie, Laia; Saez, Marc

2009-01-01

As is known, the Kyoto protocol proposes to reinforce national policies for emission reduction and, furthermore, to cooperate with other contracting parties. In this context, it would be necessary to assess these emissions, both in general and specifically, by pollutants and/or among productive sectors. The objective of this paper is precisely to estimate the polluting emissions of industrial origin in Catalonia in the year 2001, in a multivariate context that explicitly allows a distinction to be made between the polluter and/or the productive sector causing this emission. Six pollutants are considered, four directly related to greenhouse effect. A multi-level model, with two levels, pollutants and productive sectors, was specified. Both technological progress and elasticity of capital were introduced as random effects. Hence, it has been permitted that these coefficients vary according to one or the other level. The most important finding in this paper is that elasticity of capital has been estimated as very non-elastic, with a range that varies between 0.162 (the paper industry) and 0.556 (commerce). In fact, and generally speaking, greater the capital in the sector, lower the elasticity of capital estimated

The Scrap Collection per Industry Sector and the Circulation Times of Steel in the U.S. between 1900 and 2016, Calculated Based on the Volume Correlation Model

Directory of Open Access Journals (Sweden)

Alicia Gauffin

2018-05-01

Full Text Available On the basis of the Volume Correlation Model (VCM as well as data on steel consumption and scrap collection per industry sector (construction, automotive, industrial goods, and consumer goods, it was possible to estimate service lifetimes of steel in the United States between 1900 and 2016. Input data on scrap collection per industry sector was based on a scrap survey conducted by the World Steel Association for a static year in 2014 in the United States. The lifetimes of steel calculated with the VCM method were within the range of previously reported measured lifetimes of products and applications for all industry sectors. Scrapped (and apparent lifetimes of steel compared with measured lifetimes were calculated to be as follows: a scrapped lifetime of 29 years for the construction sector (apparent lifetime: 52 years compared with 44 years measured in 2014. Industrial goods: 16 (27 years compared with 19 years measured in 2010. Consumer goods: 12 (14 years compared with 13 years measured in 2014. Automotive sector: 14 (19 years compared with 17 years measured in 2011. Results show that the VCM can estimate reasonable values of scrap collection and availability per industry sector over time.

Fatal accidents analysis in Peruvian mining industry

International Nuclear Information System (INIS)

Candia, R. C.; Hennies, W. T.; Azevedo, R. c.; Almeida, I.G.; Soto, J. F.

2010-01-01

Although reductions in the tax of injuries and accidents have been observed in recent years, Mining is still one of the highest risks industries. The basic causes for occurrence of fatalities can be attributed to unsafe conditions and unsafe acts. In this scene is necessary to identify safety problems and to aim the effective solutions. On the other hand, the developing countries dependence on primary industries as mining is evident. In the Peruvian economy, approximately 16% of the GNP and more than 50% of the exportations are due to the mining sector, detaching its competitive position in the worldwide mining. This paper presents fatal accidents analysis in the Peruvian mining industry, having as basis the register of occurred fatal accidents since year 2000 until 2007, identifying the main types of accidents occurred. The source of primary information is the General Mining Direction (DGM) of the Peruvian Mining and Energy Ministry (MEM). The majority of victims belongs to tertiary contractor companies that render services for mine companies. The results of the analysis show also that the majority of accidents happened in the underground mines, and that it is necessary to propose effective solutions to manage risks, aiming at reducing the fatal accidents taxes. (Author)

Mergers & Acquisitions in India: A sectoral analysis

Directory of Open Access Journals (Sweden)

Priya Bhalla

2014-07-01

Full Text Available Globalization, deregulation and technological improvements have resulted in increase in M&A across the globe. There is enormous literature existing in the advanced economies. However, very little information is available regarding M&A in India. Various sectors have witnessed differential involvement in M&A activity indicating higher participation by some. Particularly, certain sectors such as financial services and pharmaceuticals demonstrate higher M&A activity. To emphasise differential importance of sectors in M&A activity, it is necessary to conduct a sector-wise analysis. Accordingly, this study attempts to investigate the differential representation of various sectors in M&A. Further, it explores the role played by India in the rising global M&A activity. In light of this, it specifies the factors driving consolidation in the financial sector globally.

Assessment of the energy requirements and selected options facing major consumers within the Egyptian industrial and agricultural sectors. Final report

Energy Technology Data Exchange (ETDEWEB)

1978-05-31

The objectives of the energy assessment study of Egypt are to develop an understanding of the current status of the principal energy users in Egypt's industrial and agricultural sectors; to estimate the energy demand and efficiency for each selected subsector within these major sectors; to identify opportunities for fuel type changes, technology switches, or production pattern changes which might increase the efficiency with which Egypt's energy is used both now and in the future: and based on options identified, to forecast energy efficiencies for selected Egyptian subsectors for the years 1985 and 2000. Study results are presented for the iron and steel, aluminium, fertilizer, chemical, petrochemical, cement, and textile industries and automotive manufacturers. Study results for drainage, irrigation, and mechanization procedures in the agricultural sector and food processing sector are also presented. (MCW)

System analysis of industrial waste management: A case study of industrial plants located between Tehran and Karaj

Directory of Open Access Journals (Sweden)

Mohammad Amin Karami

2015-01-01

Full Text Available Aims: In this study, management of industrial waste in industries located between Tehran and Karaj in 2009-2010 was examined. Materials and Methods: This is a cross-sectional study which was done by site survey (Iranian environmental protection organization questionnaire usage and results analysis. This questionnaire was consisted of 45 questions about industrial waste, quantity, quality, and management. A total number of industries with over 50 employees was 283, and Stratified sampling method was used. Sample of size 50 was selected from 283cases. Results: The major hazardous waste-generating industries include chemical and plastic. Private sectors disposed 45% of generated waste. Majority of wastes were buried (62%, and only 17% of industrial waste was recycled. Conclusion: For hazardous waste reduction in this zone and health and economic attractions, the opportunity for reuse and recovery for these wastes must maximize in short-term and burial of industrial waste must be minimized. Industries such as chemical-plastic and electronics which have higher hazardous waste, in long-term, must be replaced with other industries such as wood cellulose and paper that have lower hazardous waste production rate.

Financial Analysis of the Financial Institutions Sector in Kosovo

Directory of Open Access Journals (Sweden)

Vlora Prenaj

2015-12-01

Full Text Available Paper work “Financial analysis of the financial institutions sector in Kosovo” treats financial sector in Kosovo. Paper work contains the current position of the economy, economic prospects and macroeconomic projections for the financial sector in Kosovo, future potential and possibilities of financial sector in Kosovo. The main goal of this research is financial analysis of Kosovo financial institutions sector - overview of key indicators. This research evaluates the performances of commercial bank’s profitability, which have operated in the market during the period 2006-2012. This research is conducted through financial analysis coefficients: Return on Equity, Return on assets and Cost to Income. Test t-Student is used to analyze the profitability for the period 2006/2007 before the financial crisis and the period 2011/2012 after financial crisis.

Energy and capital: substitutes or complements. Some results for the UK industrial sector

Energy Technology Data Exchange (ETDEWEB)

Hunt, L.C.

1984-10-01

This paper investigates the substitutability or complementarity possibilities between capital, labor, and energy in the UK industrial sector, with particular attention to the capital-energy relationship. It is found, using the translog-cost-function approach, that capital and labor as well as energy and labor are substitutes. However, capital and energy are found to be complements. 11 references, 3 tables.

Analysis on Investment Behavior of Agricultural Sector in China

Institute of Scientific and Technical Information of China (English)

Sun Zhuo

2015-01-01

In the process of industrialization, China has been a big agricultural country, and the agricultural sector's economic activities have been playing important role in economic growth. This paper established the investment behavior model of agricultural enterprises on the basis of Chinese practice. And then, the model presented the important factors impacting on investment, such as financing cost, wage, and policy factors,etc. Thirdly, this paper in particular usedR-studio to estimate the impact of financing cost and policy factor on investment and capital accumulation of primary industry sector by gathering the data from 2003 to 2013. The results showed that the official interest rate of loans of financial institutions could be the proxy variable as the financing cost of agricultural enterprises, and the employment level of agricultural enterprises had negative impact on investment. Finally, this paper provided some explanations and suggestions on the basis of above results.

Economic Efficiency of Innovative Materials for Sectors of Economy

Directory of Open Access Journals (Sweden)

Miroshnikova Tatyana

2016-01-01

Full Text Available The paper proposes an approach to the assessment of the economic efficiency of innovative anti-corrosion coatings for sectors of the national economy of the Russia on the basis of a synthesis of strategic sectoral and cost analysis. According to the authors, a comparative analysis of composite polymeric anticorrosion protecting coatings with similar products, estimating of direct and indirect economic effect and prognosis of implementation, forms a deeper understanding of the role of innovative technologies in the Russian state development of import substitution, the investment attractiveness of Russian industries in the new part technologies, applied research activities of private companies. Metal consumption sectors of the economy were chosen as an object of research, as they are characterized by the use of the following products: industrial construction and reconstruction, nuclear and thermal power, chemical, oil and gas, utilities, food processing, automotive, shipbuilding, aviation and rocket science, other industry. Basic modeling of implementation of anticorrosion protecting coatings in industrial enterprises was carried out on the basis of generating energy enterprises as one of the main end-users of anti-corrosive materials that also issue accurate statements.

The equipment supply industry to sugar mills, ethanol and energy in Brazil: an analysis based in leading companies and key-organizations of sector and of LPA of Sertãozinho

Directory of Open Access Journals (Sweden)

Michelle Castro Carrijo

2015-12-01

Full Text Available This study aims to analyze the profile, organization, efficiency and innovation in the supply industry equipment for sugar mills, ethanol and energy in Brazil, contributing to an important discussion on the competitiveness of this industry. Therefore, the study was based on analysis of information obtained from two surveys: the first held with representative organizations and two industry-leading companies located in the cities of Sertãozinho and Piracicaba; and the second, through interviews with companies in the Local Productive Arrangement (LPA of Sertãozinho, known as the Silicon Valley Ethanol. The results suggest that the increasing modernization of the sector will require greater efforts from equipment industry to provide plants with the necessary technological innovations and potential efficiency gains and that the constituent companies of this industry, few invest in technology and professional training, in other words, are lacking in management training, which leads to loss of valuable opportunities, international market share is tiny, most companies turn to private sources of financing, and companies seem unaware of the real benefits of cooperation, although they appear in most companies in this industry.

Sector-based political analysis of energy transition: Green shift in the forest policy regime in France

International Nuclear Information System (INIS)

Sergent, Arnaud

2014-01-01

This article examines energy transition political process from a sector-based approach, through the analysis of recent shift in the French forest policy regime. We demonstrate that, since 2007, energy transition policies have led to a harvesting turn within the French forest policy framework, meaning that priority is given to wood mobilisation, mainly for biomass uses. In addition, our findings suggest that the political authority wielded by the state over forest policy has shifted from forest administrative services to energy agencies and local authorities. Finally, we show that, although implementation of the harvesting turn is a cause of sectoral and inter-sectoral tensions, energy transition challenge also contributes to a process of (re)institutionalisation of mediation relationships among forestry stakeholders and wood-based industries representatives. The article concludes by arguing that sectors should retain relevant institutional frameworks for actors when choosing political arrangements required for implementing energy transition policy. - Highlights: • Implementing energy transition policy potentially challenges sector-based politics. • We propose a policy regime framework and socio-political investigations. • We analyse the political impact of energy transition policy on French forest sector. • Shifts occur in sectoral policy framework, authority, and mediation relationships

Regulation and efficiency: an empirical analysis of the United Kingdom continental shelf petroleum industry

International Nuclear Information System (INIS)

Kashani, H.A.

2005-01-01

The petroleum industry of the United Kingdom Continental Shelf (UKCS) has been subject to various degrees of regulation. Self-sufficiency, security of supply and developing offshore supply industry triggered government regulations that were seen as interventionary and protectionist. This paper tests the extent to which regulations targeting involvement of British offshore supply industry in the UKCS activity created inefficiencies. Data envelopment analysis (DEA), stochastic frontier analysis (SFA), Malmquist Indices, and standard regression analysis are used to measure the amount and address the source of inefficiencies. We will show that such inefficiencies could not be ruled out. The results provide an important insight into the UKCS production techniques and, more generally, into governments' abilities to influence private sector behaviour through contracts and tendering

INTEGRATION OF THE FOOD INDUSTRY AND RELATED SECTORS BASED ON THE CLUSTER APPROACH

Directory of Open Access Journals (Sweden)

V. M. Bautin

2015-01-01

Full Text Available In a diversified agro-industrial complex structure of the Voronezh region there are more than 200 enterprises of food and processing industry. However, due to the growth disparity in prices for agricultural and industrial products, the collapse of a single process has been a sharp decline in the production of final products of agribusiness. In the conditions of Russia's accession to the WTO and the growth in this regard competition in the market of raw materials and finished products, problems of high relevance of search for effective strategies for the development of the food industry. The emphasis of these reforms should be a priori biased towards the crea tion of favorable conditions for the formation of optimal institutional innovation structures and prospects of development of the national agro-food system at all levels. In this regard, the formation of institutional models of integration in the agricultural sector, we regard the system approach, where the newly created integrated structure is defined as a social institution, characterized by composition, structure, objectives, functions, internal and external bounding box defined inputs and outputs. Under these conditions, there is a need to develop partnerships and coo peration between enterprises of the technological chain of the final product agribusiness, finds its expression in a variety of forms, one of which is the formation of clusters, creating the conditions for effective interaction of producers of raw materials and finished products, research and educational institutions, service infrastructure of organizations and representatives of other areas to ensure. However, the analysis showed that, across a variety of alternative strategies for the development of the food industry, the most optimal in today's economic conditions appear to integration strategies that involve the union of disparate market participants on the principles of economic integr ation, which results in a synergy

The impact of Privatisation – Empiric analysis and results in Serbian industry

Directory of Open Access Journals (Sweden)

Ivan Nikolic

2014-04-01

Full Text Available The privatization concept, applied after the 2000 changes, failed to bring the expected performance to Serbian industry. Privatization partly initiated the enterprises restructuring in some fields of manufacturing industry. It brought fresh capital, new technologies and new managerial know-how. However, the result thereof was far weaker than the initially expected. The reasons for the said, but also the end aims of the given process, are analyzed in detail throughout the following article. The research is based on the processing of data from financial statements, submitted by the companies from the Serbian non-financial corporate sector in the period 2002-2007. Panel analysis disclosed the way in which the results of each of the observed ownership forms have changed over time in different sectors and branches of the industry. On the other hand, we also tested the hypothesis according to which privatization effects on the companies’ performances significantly vary depending on the company size, whereby the effects of capital sales model have been implicitly assessed.

Carbon and Energy Saving Financial Opportunities in the Industrial Compressed Air Sector

Science.gov (United States)

Vittorini, Diego; Cipollone, Roberto

2017-08-01

The transition towards a more sustainable energy scenario calls for both medium-to-long and short term interventions, with CO2 reduction and fossil fuel saving as main goals for all the Countries in the World. Among all others, one way to support these efforts is the setting-up of immaterial markets able to regulate, in the form of purchase and sales quotas, CO2 emissions avoided and fossil fuels not consumed. As a consequence, the upgrade of those sectors, characterized by high energy impact, is currently more than an option due to the related achievable financial advantage on the afore mentioned markets. Being responsible for about 10% electricity consumption in Industry, the compressed air sector is currently addressed as extremely appealing, when CO2 emissions and burned fossil fuels saving are in question. In the paper, once a standard is defined for compressors performances, based on data from the Compressed Air and Gas Institute and PNEUROP, the achievable energy saving is evaluated along with the effect in terms of CO2 emissions: with reference to those contexts in which mature intangible markets are established, an estimation of the financial benefit from savings sale on correspondent markets is possible, in terms of both avoided CO2 and fossil fuels not burned. The approach adopted allows to extend the analysis results to every context of interest, by applying the appropriate emission factor to the datum on compressor specific consumption.

Industry sector analysis, Mexico: Annual petroleum report. Export Trade Information

International Nuclear Information System (INIS)

1992-01-01

The comprehensive appraisal of the Mexican Petroleum industry was completed in July 1991. Some of the topics concerning the Mexican petroleum industry covered in the Annual Petroleum Report include: exploration efforts, oil reserves, pipelines, refining, finances, transportation, alternative energy sources, and others. The report also contains lists of petrochemicals produced in Mexico and extensive statistics on oil production and export prices

Measuring the efficiency of energy-intensive industries across European countries

International Nuclear Information System (INIS)

Makridou, Georgia; Andriosopoulos, Kostas; Doumpos, Michael; Zopounidis, Constantin

2016-01-01

This study evaluates the energy efficiency trends of five energy-intensive industries in 23 European Union (EU) countries over the period 2000–2009. In particular, the performance of the construction, electricity, manufacturing, mining and quarrying, and transport sectors is examined. The analysis is based on Data Envelopment Analysis (DEA) combined with the Malmquist Productivity Index (MPI), which allows for distinctions between efficiency and technology changes over time. At the second stage of the analysis, cross-classified multilevel modelling is applied to analyse the main drivers behind efficiency performance using a number of sector and country characteristics. Based on DEA results, an overall improvement in efficiency is observed in all sectors over the period. The decomposition of the MPI indicates that technology change is primarily responsible for the improvements achieved in most sectors. The results obtained by the cross-classified model show, among other things, that the high electricity prices, energy taxes, and market share of the largest generator in the electricity market have a negative effect on industrial energy efficiency. - Highlights: • Analysis of energy efficiency and trends of industrial sectors in EU. • Combination of non-parametric frontier models and multilevel explanatory analysis. • Examination of the drivers of energy efficiency. • Industrial energy efficiency performance is mainly driven by technological improvement.

SEADS 3.0 Sectoral Energy/Employment Analysis and Data System

Energy Technology Data Exchange (ETDEWEB)

Roop, Joseph M.; Anderson, David A.; Schultz, Robert W.; Elliott, Douglas B.

2007-12-17

SEADS 3.0, the Sectoral Energy/Employment Analysis and Data System, is a revision and upgrading of SEADS--PC, a software package designed for the analysis of policy that could be described by modifying final demands of consumer, businesses, or governments (Roop, et al., 1995). If a question can be formulated so that implications can be translated into changes in final demands for goods and services, then SEADS 3.0 provides a quick and easy tool to assess preliminary impacts. And SEADS 3.0 should be considered just that: a quick and easy way to get preliminary results. Often a thorough answer, even to such a simple question as, “What would be the effect on U. S. energy use and employment if the Federal Government doubled R&D expenditures?” requires a more sophisticated analytical framework than the input-output structure embedded in SEADS 3.0. This tool uses a static, input-output model to assess the impacts of changes in final demands on first industry output, then employment and energy use. The employment and energy impacts are derived by multiplying the industry outputs (derived from the changed final demands) by industry-specific energy and employment coefficients. The tool also allows for the specification of regional or state employment impacts, though this option is not available for energy impacts.

Industry 4.0 Concept Introduction into Construction SMEs

Science.gov (United States)

Nowotarski, Piotr; Paslawski, Jerzy

2017-10-01

The article presents a general idea of Industry 4.0 concept with the introduction presenting descriptions of the most important aspects in terms of production and construction industry development. The importance of the SME sector is stressed showing that this group of companies plays significant role in the European economy. The main objective of the article is to define and show possible research areas connected with the introduction of Industry 4.0 concept into SMEs with the main focus on the construction sector. For this purpose, an analysis was made, based on the most recent literature, to point out actual needs in the SMEs sector in terms of its evolution into 4.0 level. What is more, the analysis was performed based on the most popular articles published in journals available in Thomson Reuters Web of Science Core Collection database regarding Industry 4.0 concept in the last decade showing the actual change of interest in this filed, taking into account possibility of usage of this concept in the construction and production sector. Authors tried to describe current knowledge regarding Industry 4.0 introduction for SMEs. Performed analysis showed that there is a wide spectrum of disciplines that are affected by the Industry 4.0 that needs to be examined considering introduction into SMEs. Study also showed that multidiscipline approach was not investigated so far to create special rules, procedures and methods and know-how designed for introduction of main principles of Industry 4.0 in the SME sector. Authors came to the conclusions that there should be more stress put into research in this field especially taking into account the huge potential which lies in SME sector in terms of global economic strength.

Determinants of eco-efficiency in the Chinese industrial sector.

Science.gov (United States)

Fujii, Hidemichi; Managi, Shunsuke

2013-12-01

This study measures productive inefficiency within the context of multi-environmental pollution (eco-efficiency) in the Chinese industrial sector. The weighted Russell directional distance model is applied to measure eco-efficiency using production technology. The objective is to clarify how external factors affect eco-efficiency. The major findings are that both foreign direct investment and investment for pollution abatement improve eco-efficiency as measured by air pollutant substances. A levy system for wastewater discharge improves eco-efficiency as measured by wastewater pollutant substances. However, an air pollutant levy does not significantly affect eco-efficiency as measured by air pollutants. Copyright © 2013 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

El conflicto competitivo entre sistemas socio-técnicos complejos y la evolución de los sectores industriales = The competitive conflict between complex socio-technical systems and industrial sector dynamics

Directory of Open Access Journals (Sweden)

Alberto Levy

2012-03-01

Full Text Available ResumenLas concepciones tradicionales con respecto a la Estrategia Competitiva y a la dinámica de los sectores industriales han sido casi siempre orientadas hacia el lado de la demanda, el Posicionamiento de las marcas, o hacia el lado de la oferta, la Productividad de los recursos. En este artículo se presenta el concepto de “paradigma vincular” para entender a la Estrategia Competitiva y la Dinámica de los Sectores Industriales. Este concepto liga el posicionamiento con la productividad desde un abordaje cognitivo, interactivo y sistémico.AbstractAlmost all of the traditional views regarding Competitive Strategy and Industrial Sector Dynamics have been oriented towards the demand side, this is a brand Positioning bias, or towards the supply side, this is a resource Productivity bias. This paper introduces the concept of “vincular paradigm” to understand Competitive Strategy and Industrial Sector Dynamics from a cognitive, interactive and systemic approach

The evolution of the energy demand in France in the industrial, residential and transportation sectors

International Nuclear Information System (INIS)

2006-01-01

This document provides information, from 1970 to 2005, on the evolution of the energy intensity (ratio between the primary energy consumption and the gross domestic product in volume) and the actions of energy control for the industrial, residential and transportation sectors. (A.L.B.)

Self-employed persons in Sweden - mortality differentials by industrial sector and enterprise legal form: a five-year follow-up study.

Science.gov (United States)

Toivanen, Susanna; Mellner, Christin; Vinberg, Stig

2015-01-01

This study investigated mortality differentials between self-employed persons in Sweden, considering industrial sector, enterprise characteristics and socio-demographic factors. Data on 321,274 self-employed persons were obtained from population registers in Sweden. Cox proportional hazards models were used to compare all-cause and cause-specific mortality rate ratios by industrial sector and enterprise legal form, adjusted for confounders. All-cause mortality was 10-32% higher in self-employed persons in Manufacturing and Mining, Trade and Communication, and Not Specified and Other sectors than in Agriculture, Forestry, and Fishing. Mortality from cardiovascular disease was 23% higher in Trade and Communication, and from neoplasms 17-51% higher in Manufacturing and Mining, Not Specified, and Other. Mortality from suicide was 45-60% lower in Personal and Cultural Services, and in Not Specified. Mortality was 8-16% higher in sole proprietorship than limited partnership. Further research of working conditions is warranted, considering industry and enterprise legal form. © 2014 Wiley Periodicals, Inc.

Women workers and unions in Europe: an analysis by industrial sector.

OpenAIRE

Hastings, S; Coleman M

1992-01-01

Based on a survey carried out in 1992. Identifies various factors influencing the degree of trade unionization of women. Studies the concentration and growth of women's employment in part-time work and the small firm sector. Covers the relationship between union membership and the extent of unemployment insurance, maternity leave and maternity benefits.

Investigation on the Relationship owth of Agricultural Sector’s Growth with Growth of Industrial and Service Sectors (Commerce, Transportation, Telecommunication in Iran

Directory of Open Access Journals (Sweden)

yaghoob zeraatkish

2014-03-01

Full Text Available Agriculture has always been considerd as one of the important sectors in domestic and international economy .Based on the Central Bank Statistics; agriculture’s share in the Iranian GDP at the constant price of the year 1998 was 13 percent of the GDP in the year 2007. Therefore, studies on the role of agriculture in an economy and its interactions with other economic sectors should be considered with a special attention. This paper aimed at surveying the effects of growth of value-added in agriculture on the value-added of different sectors of industry, services as well as subordinate sectors of transportation, communication and commerce. In this regard, the status of the period between 1967 to 2009 is used. To determine the relationship among the study variables, some econometric techniques such as VAR were used. The results of VAR technique proves that there is a positive relation among the growth of value-added in the agricultural sector with the growth of industrial sector and the growth of sub-sectors of communication, transportation and commerce. Among the mentioned sectors and sub-sectors, the growth of commerce has maximum effect on the agricultural growth. Furthermore, in the short term, the growth variant of trading sector presented the largest share in explaining the variants of the agriculture sector . The growth variant of communication sector is trivial

Learning Networks in Innovation Systems at Sector / Regional Level in Argentina: Winery and Dairy Industries

OpenAIRE

Guillermo Sanchez; Roberto Bisang

2011-01-01

This work studies how the set of relationships that gives place to the learning processes is established in the food indus- try in Argentina. A theoretical ad hoc approach is adopted, conjugating the concepts of innovation systems at sector / regional level with some context considerations like the innovative behaviour of the global and local food industry and a description of the public and private S&T in Argentina. The study is focused in two cases: the wine industry, at the Mendoza provinc...

Nuclear Energy R and D Imperative 3: Enable a Transition Away from Fossil Fuel in the Transportation and Industrial Sectors

International Nuclear Information System (INIS)

Petti, David; Herring, J. Stephen

2010-01-01

As described in the Department of Energy Office of Nuclear Energy's Nuclear Energy R and D Roadmap, nuclear energy can play a significant role in supplying energy for a growing economy while reducing both our dependence on foreign energy supplies and emissions from the burning of fossil fuels. The industrial and transportation sectors are responsible for more than half of the greenhouse gas emissions in the U.S., and imported oil supplies 70% of the energy used in the transportation sector. It is therefore important to examine the various ways nuclear energy can facilitate a transition away from fossil fuels to secure environmentally sustainable production and use of energy in the transportation and manufacturing industry sectors. Imperative 3 of the Nuclear Energy R and D Roadmap, entitled 'Enable a Transition Away from Fossil Fuels by Producing Process Heat for use in the Transportation and Industrial Sectors', addresses this need. This document presents an Implementation Plan for R and D efforts related to this imperative. The expanded use of nuclear energy beyond the electrical grid will contribute significantly to overcoming the three inter-linked energy challenges facing U.S. industry: the rising and volatile prices for premium fossil fuels such as oil and natural gas, dependence on foreign sources for these fuels, and the risks of climate change resulting from carbon emissions. Nuclear energy could be used in the industrial and transportation sectors to: (1) Generate high temperature process heat and electricity to serve industrial needs including the production of chemical feedstocks for use in manufacturing premium fuels and fertilizer products, (2) Produce hydrogen for industrial processes and transportation fuels, and (3) Provide clean water for human consumption by desalination and promote wastewater treatment using low-grade nuclear heat as a useful additional benefit. Opening new avenues for nuclear energy will significantly enhance our nation

On the formation of energy policies towards 2020: Challenges in the Swedish industrial and building sectors

International Nuclear Information System (INIS)

Thollander, Patrik; Rohdin, Patrik; Moshfegh, Bahram

2012-01-01

The impact of global climate change due to increased emissions of greenhouse gases emissions which in turn is a consequence of in particular, the use of fossil fuels, has made EU decision makers to act decisively, e.g. the EU 2020 primary energy target of reducing primary energy use with 20% from 2005 to 2020. The aim of this paper is to present major challenges related to the development and formation of energy policies towards the Swedish industrial and building sector in order to fulfill the EU 2020 primary energy target. This paper is approaching the presented challenges by introducing the theory of Asymmetric Energy Policy Shocks (AEPSs), and addresses some key challenges which are of particular relevance for the fulfilment of the EU 2020 primary energy target for Member States like Sweden which from an energy end-use perspective substantially differs from the EU-25's energy end-use structure. In conclusion, overcoming AEPSs, and moving towards a more Long-Term Energy Policy Approach (LTEPA) will be of key importance for individual Member States, if the 2020 primary energy target is to be fulfilled. - Highlights: ► The paper presents major challenges in regard to the formation of Swedish energy policy for the industry and building sectors. ► The theory of Asymmetric Energy Policy Shocks is introduced. ► Regional differences are important to take into account when designing energy policies for the industry and building sectors.

Articulation of Industrial R&D with Higher Education in the Telecommunications Sector in South Africa

Science.gov (United States)

Paterson, Andrew

2005-01-01

This article shows how and why particular higher education?industry research and development networks articulate with the South African telecommunications sector. The range of competing and complementary data telecommunications technologies available in the South African market provide varying opportunities for enterprises to engage in R&D. Two…

Analysis of historical series of industrial demand of energy; Analisi delle serie storiche dei consumi energetici dell`industria

Energy Technology Data Exchange (ETDEWEB)

Moauro, F. [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dip. Energia

1995-03-01

This paper reports a short term analysis of the Italian demand for energy fonts and a check of a statistic model supposing the industrial demand for energy fonts as a function of prices and production, according to neoclassic neoclassic micro economic theory. To this pourpose monthly time series of industrial consumption of main energy fonts in 6 sectors, industrial production indexes in the same sectors and indexes of energy prices (coal, natural gas, oil products, electricity) have been used. The statistic methodology refers to modern analysis of time series and specifically to transfer function models. These ones permit rigorous identification and representation of the most important dynamic relations between dependent variables (production and prices), as relation of an input-output system. The results have shown an important positive correlation between energy consumption with prices. Furthermore, it has been shown the reliability of forecasts and their use as monthly energy indicators.

Global financial crisis and weak-form efficiency of Islamic sectoral stock markets: An MF-DFA analysis

Science.gov (United States)

Mensi, Walid; Tiwari, Aviral Kumar; Yoon, Seong-Min

2017-04-01

This paper estimates the weak-form efficiency of Islamic stock markets using 10 sectoral stock indices (basic materials, consumer services, consumer goods, energy, financials, health care, industrials, technology, telecommunication, and utilities). The results based on the multifractal detrended fluctuation analysis (MF-DFA) approach show time-varying efficiency for the sectoral stock markets. Moreover, we find that they tend to show high efficiency in the long term but moderate efficiency in the short term, and that these markets become less efficient after the onset of the global financial crisis. These results have several significant implications in terms of asset allocation for investors dealing with Islamic markets.

Creative Industries: Development Processes Under Contemporary Conditions of Globalization

Directory of Open Access Journals (Sweden)

Valerija Kontrimienė

2017-06-01

Full Text Available The article deals with the processes of developing creative industries under conditions of a growth in the worldwide economy and globalization, discloses the role of the sector of creative industries and shows its place in the system of the modern global economy. The paper presents a comparative analysis of theories and theoretical approaches intended for the sector of creative industries and its development as well as defines regularities and specificities characteristic of the development of creative industries. Particular attention is shifted on the growth and development of creative industries considering the current challenges of globalization and on the most important specificities of the developing sector in the context of the challenges of economic globalization. The paper examines the trends reflecting the place of the sector of creative industries in the economy of the modern world, including the tendencies indicating changes in the export of the products created in this sector. The article considers the issues of developing creative industries and reveals priorities of future research.

Internet and international trade by manufacturers: An approach using industrial sectors data

Directory of Open Access Journals (Sweden)

Enrique Bernal-Jurado

2010-12-01

Full Text Available Some evidences show how the potential generated by using the Internet as a tool able to open new commercial markets is not being fulfilled. The study´s purpose is to analyze the possible intensity with which the industrial sectors incorporate and take advantage of the Internet and the volume of business generated in international markets, based on statistical information referring to Spanish industry. Starting from the available statistical information on the incorporation and commercial use of ICT, the foreign trade and production of various Spanish industries are assigned different variables and the lineal relationships among them are contrasted. Those industries with the largest importing and exporting activities are, at the same time, those that get more and more business via electronic commerce, particularly through different communication channels, such as EDI, Minitel or Internet. However, it is interesting to note the absence of this kind of relationship when we look at the e-commerce carried out exclusively through the Internet. The results justify the necessity of taking more intensive actions to improve the use of the new electronic systems in the international commercialization, especially in the environment of the small and medium sized companies.

UNIVERSITY-INDUSTRY PARTNERSHIPS FOR INNOVATION: SRI LANKAN EXPERIENCES

Directory of Open Access Journals (Sweden)

Rukmal Nishantha WEERASINGHE

2018-03-01

Full Text Available The University sector in the national innovation system (NIS is considered as one of the key players which links new knowledge with the industry for the purpose of diffusing new knowledge for economic and social benefits through commercialization of products, services, processes and other artifacts. This paper inquires the role of Sri Lankan universities in the innovation process by paying special attention on the strength of university-industry linkages. Responses from the industrial sector obtained through a surveys and interviews with respondents. Data presented and analyzed through descriptive statistics using summery statistics and figures.  Social Network Analysis (SNA was employed to determine the strength of the networking relationship among the Universities and the Firms Qualitative data were analyzed employing the method of content analysis. The study revealed a positive trend in the higher education sector towards performing effective role in the future towards innovation. However, it was evident that these relationships are still remained very weak. The industrial sector remains inward oriented with little intention to innovation while universities still prioritize their traditional teaching role in higher education.

A disaggregated analysis of the environmental Kuznets curve for industrial CO_2 emissions in China

International Nuclear Information System (INIS)

Wang, Yuan; Zhang, Chen; Lu, Aitong; Li, Li; He, Yanmin; ToJo, Junji; Zhu, Xiaodong

2017-01-01

Highlights: • The existence of EKC hypothesis for industrial carbon emissions is tested for China. • A semi-parametric panel regression is used along with the STIRPAT model. • The validity of the EKC hypothesis varies across industry sectors. • The EKC relation to income exists in the electricity and heat production sector. • The EKC relation to urbanization exists in the manufacturing sector. - Abstract: The present study concentrates on a Chinese context and attempts to explicitly examine the impacts of economic growth and urbanization on various industrial carbon emissions through investigation of the existence of an environmental Kuznets curve. Within the Stochastic Impacts by Regression on Population, Affluence and Technology framework, this is the first attempt to simultaneously explore the income/urbanization and disaggregated industrial carbon dioxide emissions nexus, using panel data together with semi-parametric panel fixed effects regression. Our dataset is referred to a provincial panel of China spanning the period 2000–2013. With this information, we find evidence in support of an inverted U-shaped curve relationship between economic growth and carbon dioxide emissions in the electricity and heat production sector, but a similar inference only for urbanization and those emissions in the manufacturing sector. The heterogeneity in the EKC relationship across industry sectors implies that there is urgent need to design more specific policies related to carbon emissions reduction for various industry sectors. Also, these findings contribute to advancing the emerging literature on the development-pollution nexus.

Industrial Control Systems/SCADA systems risk assessment in the energy sector

Science.gov (United States)

Falodun, Babatunde

The energy sector is one of the most critical components of our national infrastructure. It not only provides the electrical power and petroleum required to run day-to-day operations and mechanisms in society, it's also an important element that directly impacts the economy with regard to growth and stability. Industrial Control Systems (ICS) /Supervisory Control and Data Acquisition Systems (SCADA) are computerized mechanisms, they are both software and hardware that are used to control real time processes and operations in power plants and oil production facilities. A significant attack on these control systems that leads to widespread disruption of energy could result in catastrophic consequences for any major city and even the nation. This research paper explores cyber threats and vulnerabilities faced by ICS/SCADA systems in the energy sector and also highlights possible outcomes of a successful breach. Furthermore, the research underscores mitigation strategies that could be used to prevent and respond to an attack. Keywords: Cybersecurity, SCADA, Cyber Attacks, Threats, Vulnerabilities, Risk Assessment, Dr. Albert Orbinati.

Regional water coefficients for U.S. industrial sectors

Directory of Open Access Journals (Sweden)

Riccardo Boero

2017-12-01

Full Text Available Designing policies for water systems management requires the capability to assess the economic impacts of water availability and to effectively couple water withdrawals by human activities with natural hydrologic dynamics. At the core of any scientific approach to these issues there is the estimation of water withdrawals by industrial sectors in the form of water coefficients, which are measurements of the quantity of water withdrawn per dollar of GDP or output. In this work we focus on the contiguous United States and on the estimation of water coefficients for regional scale analyses. We first compare an established methodology for the estimation of national water coefficients with a parametric one we propose. Second, we introduce a method to estimate water coefficients at the level of ecological regions and we discuss how they reduce possible biases in regional analyses of water systems. We conclude discussing advantages and limits of regional water coefficients.

Game theory approach in decisional process of energy management for industrial sector

International Nuclear Information System (INIS)

Aplak, H. Soner; Sogut, M. Ziya

2013-01-01

Highlights: • Decision-making process of the industry and the environment are evaluated in a game theoretic approach. • Industry and environment are considered as two players to find optimal strategies in governing energy policy. • Industry plays its renewable energy usage strategy. • Environment prefers to execute its protection reflex strategy for survivability and sustainability. • The industry’s insistence on the use of fossil fuels will forward strategy for the environment of uncertainty. - Abstract: Intensive energy consuming industrial sectors are the most important actors on global climate change which natural habitat and the environment faced. In this study, by the scope of energy management, decision-making process of the industry and the environment are evaluated in a game theoretic approach. Industry and environment are considered as two players which have conflicting objectives and try to find optimal strategies in governing energy policy. According to concept of study, while industry tries to maintain the sustainability of production with the strategies of fossil fuel, renewable energies, energy recovery and nuclear energy usage, environment exhibits reactive approach to ensure its sustainability. In the flow of study, players’ strategies are analyzed by using Multi-Criteria Decision Making (MCDM) methods and by calculating performance efficiency values of strategies, game payoff matrix is obtained. Finally, optimal strategies are found for both industry and environment in orienting their energy policy and results are evaluated. According to results of the payoff matrix, the equilibrium point is the cell (2, 1) with the values of 0.5324 and 0.5619. This implies that the environment develops protective reflexes for sustainable nature in case of using renewable energy in industry

Changes of energy-related GHG emissions in China: An empirical analysis from sectoral perspective

International Nuclear Information System (INIS)

Xu, Xianshuo; Zhao, Tao; Liu, Nan; Kang, Jidong

2014-01-01

Highlights: • We analyzed the factors impacting China’s emissions from a sectoral perspective. • Sector-specific policies and measures for emissions mitigation were evaluated. • Economic growth dominantly increased the emissions in the economic sectors. • Energy intensity decrease primarily reduced the emissions in the economic sectors. • Residential emissions growth was mainly driven by increase in per-capita energy use. - Abstract: In order to better understand sectoral greenhouse gas (GHG) emissions in China, this study utilized a logarithmic mean Divisia index (LMDI) decomposition analysis to study emission changes from a sectoral perspective. Based on the decomposition results, recently implemented policies and measures for emissions mitigation in China were evaluated. The results show that for the economic sectors, economic growth was the dominant factor in increasing emissions from 1996 to 2011, whereas the decline in energy intensity was primarily responsible for the emission decrease. As a result of the expansion of industrial development, economic structure change also contributed to growth in emissions. For the residential sector, increased emissions were primarily driven by an increase in per-capita energy use, which is partially confirmed by population migration. For all sectors, the shift in energy mix and variation in emission coefficient only contributed marginally to the emissions changes. The decomposition results imply that energy efficiency policy in China has been successful during the past decade, i.e., Top 1000 Priorities, Ten-Key Projects programs, the establishment of fuel consumption limits and vehicle emission standards, and encouragement of efficient appliances. Moreover, the results also indicate that readjusting economic structure and promoting clean and renewable energy is urgently required in order to further mitigate emissions in China

2008-2010 Research Summary: Analysis of Demand Response Opportunities in California Industry

Energy Technology Data Exchange (ETDEWEB)

Goli, Sasank [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Olsen, Daniel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McKane, Aimee [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Piette, Mary Ann [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2011-08-01

This report describes the work of the Industrial Demand Response (DR) Team of Lawrence Berkeley National Laboratory’s Demand Response Research Center (DRRC) from 2008-2010, in the context of its mandate to conduct and disseminate research that broadens the knowledge base of DR strategies, with a focus on the Industrial-Agricultural-Water (IAW) sector. Through research and case studies of industrial sectors and entities, the DRRC-IAW Team continued to assimilate knowledge on the feasibility of industrial DR strategies with an emphasis on technical and economic evaluation and worked to encourage implementation of these strategies.

Sectoral Innovation Watch Biotechnology Sector. Final sector report

NARCIS (Netherlands)

Enzing, C.

2011-01-01

Biotechnology has evolved from a single set of technologies in the mid 1970s into a full grown technological field that is the driving force in innovation processes in many industrial sectors (pharmaceutical, medical, agriculture, food, chemical, environment, instruments). Nowadays, biotechnology is

Economic interrelationships and impacts of the aviation/aerospace industry in the state of Florida using input-output analysis

Science.gov (United States)

Whealan George, Kelly

The study provided a detailed description of the interrelatedness of the aviation and aerospace industry with principal industries in Florida and Volusia County (VC) using Input-Output (IO) analysis. Additionally, this research provided an economic impact analysis of the creation of a university research park in Daytona Beach (DB). The economic impact measures included not only direct economic output and industry employment descriptions but also described the multiplier effects in the form of indirect and induced impacts using data for 2012. This research concluded the average labor income of the aviation and aerospace industry was higher than average labor income in Florida and VC. A substantive difference between the Florida and VC average labor income for the aviation and aerospace industry existed because VC's aerospace sector was only concentrated in the search, detection, and navigation instruments manufacturing sector. VC's transport by air sector was one-fifth the size of Florida's. Differences in the aviation and aerospace industry composition between Florida and VC are important because the economic impacts from a shock to the entire aviation and aerospace industry will be distributed differently. Since the aviation and aerospace average labor income is higher than the average labor income in Florida and VC, it would be a positive move for Florida's economy to attract and grow the aviation and aerospace industry. It would be highly unlikely that the entirety of newly created jobs would be resourced from the local population. Nonetheless, growing the aviation and aerospace industry jobs would have a positive influence on the region's economy and tax revenues. It would be a desirable course of action to spur the growth of this sector, as its direct effect would culminate with additional jobs in Florida that would bring higher wage jobs to the state. The interdependencies of the aviation and aerospace industry in Florida and VC with other industries had a

Contribution of Romanian Secondary Sector to Regional Development

Directory of Open Access Journals (Sweden)

Cristina ALPOPI

2016-06-01

Full Text Available In this paper, we shows the contribution of the secondary sector (industry and construction on the economic development of the regions, functional areas and the urban system in Romania. The development of economic activities of production is conditioned by certain geophysical, demographical, social and cultural characteristics. Considering that economic restructuring and privatization of industry put their mark on the evolution of the Romanian economy in recent years, it is absolutely necessary to take into account the influence of the secondary sector activities - industry and construction, to establish the development measures of romanian regions. One more reason is that the most industrialized cities prior 1990, dependent on a single branch of industry, losing the markets for these industries, recorded high unemployment, which in terms of social, equates to a high degree of poverty. Territorial development of the secondary sector shows large differences mainly due to natural barriers, level of accessibility to natural resources and public services of general interest. These gaps deep more economic and social problems existing in the territory. In the secondary sector, Romania follows closely the provisions of European Union policy, in order to develop a national competitive market, integrated into the European internal market. An example: in the industrial branch, employment share is approximately equal to the european average level. In terms of productivity, in Romania, in the context of a very low level of this indicator, its value is high in the industrial sector (especially in the manufacturing sector the specific productivity is above the national average. It is estimated that after 2014, the improvement of Romania's macroeconomic stability could generate rapid growth in the secondary sector. In Romania, industrial sector faces with problems such: the high level of resources not identified, poor promotion on domestic and foreign market

Does the regulation of the insurance industry have a pernicious effect on innovation by the sector in South Africa?

Directory of Open Access Journals (Sweden)

Elton Zingwevu

2015-07-01

Full Text Available Financial regulation could be a double edged sword in that despite its major thrust being that to secure the financial sector and bring about financial stability; it might have the unintended consequence of stifling innovation by the sector. We investigate the nexus between financial regulation and innovation by specifically focusing on the insurance industry in South Africa. We demonstrate that there are plethora pieces of legislation that govern the insurance industry in South Africa. As such this has driven the cost of compliance to unsustainable levels thereby curtailing the spending by companies on innovation. We thus would like to caution the policy makers’ that this “heavy-touch” regulatory mode is having a pernicious effect on research and development by the insurance sector. As such we encourage them to embrace the “light-touch” regulatory mode whereby self-regulation and moral suasion are other avenues to be considered.

Creative Industries in Ukraine: Analysis and Prospects of the Development

Directory of Open Access Journals (Sweden)

Iryna V. Skavronska

2017-06-01

Full Text Available This paper provides a snapshot of the role and importance of the creative industries for the Ukrainian economy. The economic dimension of the creative sector in Ukraine is becoming of higher interest for policy-makers taking into account its increasing contribution to international trade and great potential for further development. Correspondingly, this research is aimed at determining the importance and efficiency of the creative industries for the Ukrainian economy. The methodology of the study is founded on exploring the impact of the creative sector on an economic milieu in Ukraine. The paper proposes a strategy how the creative industries can transform Ukraine into a creative economy. This approach identifies four primary targets, which may result in economic, social, creative and cultural benefits, including keeping and development the creative talent, encouragement of the Ukrainian creative businesses, promoting “culture of openness,” and shaping the creative ecosystem. This study provides a unique and vital contribution to ongoing discussions about the significance of the creative industries for national economies highlighting the universalized assumptions concerning the position of this sector in the Ukrainian economy.

Modal analysis of a stiffened toroidal shell sector

International Nuclear Information System (INIS)

Cerreta, R.; Di Pietro, E.; Pizzuto, A.

1987-01-01

This paper presents the results of the modal analysis of a sector of the toroidal vacuum vessel of a new experimental machine for research in the field of controlled thermonuclear fusion (FTU - Frascati Tokamak Upgrade). The vacuum vessel, one of the most critical components of the experimental device, consist of 12 stainless steel toroidal sectors, and it is designed to withstand pulsed electromagnetic loads during operation. Results of the modal analysis of the stiffened toroidal shell sector are compared and discussed with regard to the experimental data. Theoretical eigenvalues and eigenvectors have been predicted by means of ABAQUS finite element code. Experimental analysis has been carried out on a full scale model and natural frequencies have been measured. Satisfactory agreement between experimental and theoretical eigenvalues has been found

Electricity consumption, industrial production, and entrepreneurship in Singapore

International Nuclear Information System (INIS)

Sun, Sizhong; Anwar, Sajid

2015-01-01

Within the context of a tri-variate vector autoregressive framework that includes entrepreneurship, this paper examines the link between electricity consumption and industrial production in Singapore's manufacturing sector. Unlike the existing studies, this paper focuses on one sector of the economy and utilises a unique monthly dataset. Empirical analysis based on Johansen's cointegration approach shows that the three variables are cointegrated – i.e., a stable long-run relationship exists among electricity consumption, output and entrepreneurship in Singapore's manufacturing sector. Empirical analysis based on data from January 1983 to February 2014 reveals that electricity consumption adjusts very slowly to shocks to industrial production and entrepreneurship. Furthermore, entrepreneurship Granger causes electricity consumption, which causes industrial production. As electricity consumption causes industrial output, the growth hypothesis concerning energy consumption and economic growth holds in Singapore's manufacturing sector and policies that restrict electricity production, without electricity imports, are likely to lead to a decline in the manufacturing output. - Highlights: • Using a unique monthly dataset, we focus on Singapore's manufacturing sector. • Electricity consumption, output and entrepreneurship are cointegrated. • Electricity consumption adjusts very slowly to shocks to the other variables. • Entrepreneurship causes electricity consumption which causes industrial production. • We find that growth hypothesis governs the electricity consumption and real output

Energy Sector Market Analysis

Energy Technology Data Exchange (ETDEWEB)

Arent, D.; Benioff, R.; Mosey, G.; Bird, L.; Brown, J.; Brown, E.; Vimmerstedt, L.; Aabakken, J.; Parks, K.; Lapsa, M.; Davis, S.; Olszewski, M.; Cox, D.; McElhaney, K.; Hadley, S.; Hostick, D.; Nicholls, A.; McDonald, S.; Holloman, B.

2006-10-01

This paper presents the results of energy market analysis sponsored by the Department of Energy's (DOE) Weatherization and International Program (WIP) within the Office of Energy Efficiency and Renewable Energy (EERE). The analysis was conducted by a team of DOE laboratory experts from the National Renewable Energy Laboratory (NREL), Oak Ridge National Laboratory (ORNL), and Pacific Northwest National Laboratory (PNNL), with additional input from Lawrence Berkeley National Laboratory (LBNL). The analysis was structured to identify those markets and niches where government can create the biggest impact by informing management decisions in the private and public sectors. The analysis identifies those markets and niches where opportunities exist for increasing energy efficiency and renewable energy use.

The potential estimation and factor analysis of China′s energy conservation on thermal power industry

International Nuclear Information System (INIS)

Lin, Boqiang; Yang, Lisha

2013-01-01

At present, researches about energy conservation are focused on prediction. But there are few researches focused on the estimation of effective input and energy conservation potential, and there has been even no research on energy conservation of thermal power industry of China. This paper will try to fill in such a blank. Panel data on Chinese thermal power industry over 2005–2010 are established, and we adopt the stochastic frontier analysis approach to estimate the energy saving potential of thermal power industry. The results are as follows: (1) the average efficiency of energy inputs in China′s thermal power industry over 2005–2010 was about 0.85, and cumulative energy saving potential equals to 551.04 (Mtce); (2) by improving the non-efficiency factors, the relatively backward inland cities could achieve higher energy saving in thermal power industry; (3) the energy input efficiency of Eastern China Grid is shown to be the highest; (4) in order to realize the energy-saving goal of thermal power industry, one important policy method the government should adopt is to conduct a market-oriented reform in power industry and break the state-owned monopoly to provide incentives for private and foreign direct investment in thermal power sector. -- Highlights: •We adopt SFA model to estimate the coal input efficiency of power sector in China. •We calculate the cumulative energy saving potential equals to 551.04 Mtce. •East China power grid has the highest energy input efficiency. •Some backward inland cities may be the main force for future energy conservation. •Encourage private and foreign direct investment in power sector might be effective

Analysis of the importance of structural change in non-energy intensive industry for prospective modelling: The French case

International Nuclear Information System (INIS)

Seck, Gondia Sokhna; Guerassimoff, Gilles; Maïzi, Nadia

2016-01-01

A large number of studies have been conducted on the contribution of technological progress and structural change to the evolution of aggregate energy intensity in the industrial sector. However, no analyses have been done to examine theses changes in the non-energy intensive industry in France. We analyzed their importance in French industry with respect to their energy intensity, energy costs, value added, labour and the diffusion of production sites by using data at the 3-digit level with 236 sectors. Using a new decomposition method that gives no residual, this paper attempted to examine, over 10 years from 1996 to 2005, the changes that occurred in an area that has been neglected in energy analysis. We found that structural change had an overwhelming effect on the decline of aggregate energy intensity. Furthermore, we found that the higher the level of sector disaggregation, the more significant the changes that can be attributed to structural change, due to the homogeneity of this industrial group. The results of our study show that it is important to take into account the effects of structural change in “bottom-up” modelling exercises so as to improve the accuracy of energy demand forecasting for policy-makers and scientists. - Highlights: • Defining NEI industries with a quantitative approach from relevant indicators in France. • Developing new decomposition method given in additive form with no residual in NEI. • Structural change is the overwhelming factor in improving energy performance within NEI. • Revealed consistent trend with level of sector disaggregation if homogeneous industries.

Development of a security vulnerability assessment process for the RAMCAP chemical sector.

Science.gov (United States)

Moore, David A; Fuller, Brad; Hazzan, Michael; Jones, J William

2007-04-11

The Department of Homeland Security (DHS), Directorate of Information Analysis & Infrastructure Protection (IAIP), Protective Services Division (PSD), contracted the American Society of Mechanical Engineers Innovative Technologies Institute, LLC (ASME ITI, LLC) to develop guidance on Risk Analysis and Management for Critical Asset Protection (RAMCAP). AcuTech Consulting Group (AcuTech) has been contracted by ASME ITI, LLC, to provide assistance by facilitating the development of sector-specific guidance on vulnerability analysis and management for critical asset protection for the chemical manufacturing, petroleum refining, and liquefied natural gas (LNG) sectors. This activity involves two key tasks for these three sectors: Development of a screening to supplement DHS understanding of the assets that are important to protect against terrorist attack and to prioritize the activities. Development of a standard security vulnerability analysis (SVA) framework for the analysis of consequences, vulnerabilities, and threats. This project involves the cooperative effort of numerous leading industrial companies, industry trade associations, professional societies, and security and safety consultants representative of those sectors. Since RAMCAP is a voluntary program for ongoing risk management for homeland security, sector coordinating councils are being asked to assist in communicating the goals of the program and in encouraging participation. The RAMCAP project will have a profound and positive impact on all sectors as it is fully developed, rolled-out and implemented. It will help define the facilities and operations of national and regional interest for the threat of terrorism, define standardized methods for analyzing consequences, vulnerabilities, and threats, and describe best security practices of the industry. This paper will describe the results of the security vulnerability analysis process that was developed and field tested for the chemical manufacturing

Development of a security vulnerability assessment process for the RAMCAP chemical sector

International Nuclear Information System (INIS)

Moore, David A.; Fuller, Brad; Hazzan, Michael; Jones, J. William

2007-01-01

The Department of Homeland Security (DHS), Directorate of Information Analysis and Infrastructure Protection (IAIP), Protective Services Division (PSD), contracted the American Society of Mechanical Engineers Innovative Technologies Institute, LLC (ASME ITI, LLC) to develop guidance on Risk Analysis and Management for Critical Asset Protection (RAMCAP). AcuTech Consulting Group (AcuTech) has been contracted by ASME ITI, LLC, to provide assistance by facilitating the development of sector-specific guidance on vulnerability analysis and management for critical asset protection for the chemical manufacturing, petroleum refining, and liquefied natural gas (LNG) sectors. This activity involves two key tasks for these three sectors:*Development of a screening to supplement DHS understanding of the assets that are important to protect against terrorist attack and to prioritize the activities. *Development of a standard security vulnerability analysis (SVA) framework for the analysis of consequences, vulnerabilities, and threats. This project involves the cooperative effort of numerous leading industrial companies, industry trade associations, professional societies, and security and safety consultants representative of those sectors. Since RAMCAP is a voluntary program for ongoing risk management for homeland security, sector coordinating councils are being asked to assist in communicating the goals of the program and in encouraging participation. The RAMCAP project will have a profound and positive impact on all sectors as it is fully developed, rolled-out and implemented. It will help define the facilities and operations of national and regional interest for the threat of terrorism, define standardized methods for analyzing consequences, vulnerabilities, and threats, and describe best security practices of the industry. This paper will describe the results of the security vulnerability analysis process that was developed and field tested for the chemical manufacturing

Features of food industry on the Internet: A case of Lithuania

Directory of Open Access Journals (Sweden)

Vida Davidavičienė

2017-02-01

Full Text Available The objective of this paper is to identify and present the current situation of Lithuanian food industry sector in terms of online presence, use of e-marketing tools and internet strategy implementation, paying attention to food manufacturers, marketers, and food delivery (including fast food and restaurants. The following methods as comparative analysis of the scientific literature, secondary data analysis, data comparison and logical grouping, graphical representation of data, and descriptive statistics employed. For empirical study, it was decided to investigate online activities of the food industry sector of Lithuania using structured observation technique. Following assumptions were formed after study: companies of food industry are more oriented to Russia than to European market, and Baltic market is really important for this sector. It is necessary to investigate food industry sector activities and strategies in other regions, and to develop model of Internet strategy forming for food industry by online presence decisions. The originality of this work lies in studying some aspects of strategic and tactical decisions related to online presence of food industry companies of Lithuania.

Heat recovery with heat pumps in non-energy intensive industry: A detailed bottom-up model analysis in the French food and drink industry

International Nuclear Information System (INIS)

Seck, Gondia Sokhna; Guerassimoff, Gilles; Maïzi, Nadia

2013-01-01

Highlights: • First bottom-up energy model for NEI at 4-digit level of NACE for energy analysis. • Energy end-use modelling due to the unsuitability of end-product/process approach. • Analysis of heat recovery with HP on industrial processes up to 2020 in French F and D. • Energy consumption and emissions drop respectively by 10% compared to 2001 and 9% to 1990. • Results only achieved at heat temperature below 100 °C, concentrated in 1/3 of F and D sectors. - Abstract: Rising energy prices and environmental impacts inevitably encourage industrials to get involved in promoting energy efficiency and emissions reductions. To achieve this goal, we have developed the first detailed bottom-up energy model for Non-Energy Intensive industry (NEI) to study its global energy efficiency and the potential for CO 2 emissions reduction at a 4-digit level of NACE classification. The latter, which is generally neglected in energy analyses, is expected to play an important role in reducing industry energy intensity in the long term due to its economic and energy significance and relatively high growth rate. In this paper, the modelling of NEI is done by energy end-use owing to the unsuitability of the end-product/process approach used in the Energy Intensive industry modelling. As an example, we analysed the impact of heat recovery with heat pumps (HP) on industrial processes up to 2020 on energy savings and CO 2 emissions reductions in the French food and drink industry (F and D), the biggest NEI sector. The results showed HP could be an excellent and very promising energy recovery technology. For further detailed analysis, the depiction of HP investment cost payments is given per temperature range for each F and D subsector. This model constitutes a useful decision-making tool for assessing potential energy savings from investing in efficient technologies at the highest level of disaggregation, as well as a better subsectoral screening

Predator–prey analysis using system dynamics: An application to the steel industry

Directory of Open Access Journals (Sweden)

Douglas Crookes

2016-12-01

Full Text Available In this paper, we use a predator–prey model to simulate intersectoral dynamics, with the global steel sector as the prey that supplies inputs and the automotive sector as the predator that demands its inputs. A further prey, an additional upstream supply sector, namely the iron ore sector, is added to reflect the implications of scarcity and resource limitations for industrial development and economic prospects. We find that capacity constraints in the steel industry could limit the future supply of vehicles, a result exacerbated by the unsustainable use of iron ore reserves. The solution is not for marginal steel industries to close, but for steelmakers to adapt and move to less resource-demanding secondary steelmaking technology rather than focusing on primary steelmaking. The forecasting capabilities of the model are compared with the outputs from a neural-network model. Although the results are comparable over the short term (±10 years, over the long term, results diverge, showing that forecasting steel-industry dynamics is complex and that further work is required to disentangle the drivers of supply and demand. This study indicates the potential advantages of using predator–prey models in modelling the supply chain in economics.

Market development for active solar thermal systems (ASTS) in the institutional, commercial and industrial (ICI) sectors

International Nuclear Information System (INIS)

2000-01-01

The market potential for active solar thermal systems in the institutional, commercial and industrial sectors of the Canadian economy was investigated, the objective being to identify markets and to prepare action plans as the foundation for developing these markets by Natural Resources Canada and the industry. In the process of researching the market, barriers to market development in these sectors of the economy were also identified as well as actions to overcome these barriers. Nine potential applications were modelled to determine their energy, economic and environmental performance. Of these four attractive applications have been selected for more detailed treatment. Separate action plans have been developed for Natural Resources Canada, the Canadian Solar Industries Association and the active solar thermal industry. The close cooperation of all three partners is considered essential for a successful marketing effort. A marketing plan which gives due consideration to the product, planning, packaging, price and promotion, is also considered to be a vital ingredient, as is a meticulous follow-up on 'leads' created by exposure to the target market. Solarwall'TM' for preheating of ventilation air to new school buildings and solar domestic hot water heating for camp grounds have been identified as the most attractive candidates for marketing at this time. Highlights of marketing plans for these two options are included for purposes of illustrating the essential ingredients of marketing plans. 1 fig

Employability skills for the Romanian outsourcing industry

Directory of Open Access Journals (Sweden)

Foerster-Pastor Foerster-Metz Ulrike Stefanie

2017-07-01

Full Text Available The Romanian outsourcing sector as part of the service sector has evolved enormously in the last decade in Romania. Foreign Direct Investments in this sector continue to grow, thus the sector employs more than 100.000 people in 2016 in Romania. However, companies claim not to get the right skills from employees which will allow them to move the latter from a purely service sector to more value-added services. Therefore, there is a need to generate a workforce with the necessary employability skills which will serve the industry, thus allowing the continuity of growth as well as permitting to be competitive in regards to other East European countries in the outsourcing industry as salaries rise in the Romanian industry and the industry is being pressured by the 4th industrial revolution. So far, many Romanian studies have been done reflecting the skills need from the sector by using in first instance the questionnaire methodology or global surveys mostly on a very holistic view. This paper shows a new approach by deriving the skills needed by employers from their own data base: mainly job descriptions published in companies or recruitment sites by analysis of job entry positions. This allows a close and accelerated approach to define skills needed without a too high time delay in addition it permits to understand if the outsourcing industry is moving towards digitalization. The job descriptions are analyzed by using the method of qualitative content analysis according to Mayring (2014 using specific criteria based on literature review of employability skills. Key findings show that there is a need for specific skills technical skills but a trend to a higher demand in soft skills.

A BRIEF ANALYSIS OF THE TOURISM SECTOR - CURRENT TRENDS AND ISSUES IN THE BULGARIAN TOURIST BUSINESS

Directory of Open Access Journals (Sweden)

Kostadin Valkov

2016-03-01

Full Text Available Thе analysis presented in current article deepens and summarizes the results of an economic study focused on the management of human resources in the sector "Tourism". The expected changes in organizational and technological terms are taken into account. The law on tourism in the Republic of Bulgaria and the types of taxes that directly and indirectly affect those employed in tourism are considered. Leading accents are the current trends and issues that arise from the lack of skilled workers in this sector and their deficit caused by the seasonal nature of employment. Growing gray economy is concerned as a major obstacle to development of the tourism industry and its future.

ANALYSIS OF AGRARIAN SECTOR RESOURCE PROVIDING IN UKRAINE

Directory of Open Access Journals (Sweden)

Iryna Bezpyata

2016-11-01

Full Text Available The aim of this article is an analysis of material well-being level in agrarian sector of economy by productive resources (by land, labour, hardware providing with that provides efficiency of economic activity and ground of basic directions of the rational bringing in and use of resource potential of agrarian sector of economy in Ukraine in market conditions. Research methodology consists in the use of statistical and economic research methods for analysis of productive resources using modern state of agriculture for period from 2010 to 2014 years. Research results show that the resource providing agrarian sector development can be defined as totality of certain types of resources (land, technological, labour, financial and sources of their forming, directly participating in the processes of agrarian sector economies development that can be mobilized with the purpose of providing the scale using of their potential possibilities and transition of agriculture to the qualitatively new state. Analysis of the modern state of material well-being of agrarian sector resources of economy in Ukraine is unsatisfactory and with every year gets worse. To overcome this problem agricultural commodity producers are unable only by themselves. For the improvement of the economic state of agrarian sector of economy in whole country and regional state support of home agricultural producer, stimulation of his activity is needed. And first of all the self-weighted investment policy of the state should become such measures in the agrarian sector of economy that will allow bringing in of greater amount of investment resources for the improvement of technical equipment at agricultural enterprises, development of production co-operation and products sale, introduction of personnel management modern methodology, increase in labour activity level in agrarian sector, realization of the permanent updating and increase in products quality control, etc. Practical value. Got

Decoupling Analysis of China’s Product Sector Output and Its Embodied Carbon Emissions—An Empirical Study Based on Non-Competitive I-O and Tapio Decoupling Model

Directory of Open Access Journals (Sweden)

Jianbo Hu

2017-05-01

Full Text Available This paper uses the non-competitive I-O model and the Tapio decoupling model to comprehensively analyze the decoupling relationship between the output of the product sector in China and its embodied carbon emissions under trade openness. For this purpose, the Chinese input and output data in 2002, 2005, 2007, 2010, and 2012 are used. This approach is beneficial to identify the direct mechanism for the increased carbon emission in China from a micro perspective and provides a new perspective for the subsequent study about low-carbon economy. The obtained empirical results are as follows: (1 From overall perspective, the decoupling elasticity between the output of the product sector and its embodied carbon emissions decreased. Output and embodied carbon emissions showed a growth link from 2002 to 2005 and a weak decoupling relationship for the rest of the study period. (2 Among the 28 industries in the product sector, the increased growth rate of output in more and more product sectors was no longer accompanied by large CO2 emissions. The number of industries with strong decoupling relationships between output and embodied carbon emissions increased. (3 From the perspective of three industries, the output and embodied carbon emissions in the second and third industries exhibited a growth link only from 2002 to 2005; the three industries presented weak or strong decoupling for the rest of the study period. Through empirical analysis, this paper mainly through the construction of ecological and environmental protection of low carbon agriculture, low carbon cycle industrial system, as well as intensive and efficient service industry to reduce the carbon emissions of China’s product sector.

PREVIOUS DEVELOPMENTS AND THE CURRENT SITUATION IN THE TURKISH BANKING SECTOR, FOREIGN ENTRY AND ITS REFLECTIONS ON THE NATIONAL BANKING INDUSTRY

Directory of Open Access Journals (Sweden)

Aytac GOKMEN

2009-01-01

Full Text Available The banking industry possesses a unique property that is unlike to other sectors with respect to supplying liquidity and financial strength for the economy and transaction operations However, despite their significance, banking industries in the world are subject to various crises and foreign interventions that could affect the financial industry negatively. This study describes the background of the Turkish Banking Sector, explains the reasons for the three major crises it was subjected to in 1994, 2001 and 2002 that resulted from numerous factors such as insufficient implementation of regulations, inadequate depth of the capital markets, lack of assessment of risk, inadequate managerial applications and excessive lending to incorporated institutions. The study also dwells on the restructuring process that has been continuing for more than two decades, reasons of foreign entry to the Turkish Banking Industry, as well as explains the reflections of foreign entry on the national banking industry depending on various comprehensive and credible national and international publications.

Analysis of Public Sector Efficiency in Developed Countries

Directory of Open Access Journals (Sweden)

Ivan Lovre

2017-06-01

Full Text Available The public sector in developed countries went through various forms of transformation in the twentieth century. The expansion of the public sector resulted in high levels of public spending in developed countries. The financial crisis of 2008 led to recessions in the economies of developed countries, the public debt growth, and actualized the issue of the public sector optimal size and efficiency. This study analysed the public sector efficiency in 19 developed countries. The analysis focuses on the relationship between the size of public expenditure and economic growth in the global financial crisis and the measures implemented. The aim of the research in this paper is a comparison of total and partial efficiency of the public sector in developed countries, in order to determine the characteristics of the public sector operations. The comparison covers the areas of the public sector operations in order to identify sources of inefficiency. Partial and overall efficiency of countries are analysed with different size and concept of the public sector, to determine the relationship between the public sector size, efficiency and welfare of citizens. The research results clearly indicate (unjustified state intervention in developed countries.

Performance measurement in transport sector analysis

Directory of Open Access Journals (Sweden)

M. Išoraitė

2004-06-01

Full Text Available The article analyses the following issues: 1. Performance measurement in literature. The performance measurement has an important role to play in the efficient and effective management of organizations. Kaplan and Johnson highlighted the failure of the financial measures to reflect changes in the competitive circumstances and strategies of modern organizations. Many authors have focused attention on how organizations can design more appropriate measurement systems. Based on literature, consultancy experience and action research, numerous processes have been developed that organizations can follow in order to design and implement systems. Many frameworks have been proposed that support these processes. The objective of such frameworks is to help organizations define a set of measures that reflect their objectives and assess their performance appropriately. 2. Transport sector performance and its impacts measuring. The purpose of transport measurement is to identify opportunities enhancing transport performance. Successful transport sector management requires a system to analyze its efficiency and effectiveness as well as plan interventions if transport sector performance needs improvement. Transport impacts must be measurable and monitorable so that the person responsible for the project intervention can decide when and how to influence them. Performance indicators provide a means to measure and monitor impacts. These indicators essentially reflect quantitative and qualitative aspects of impacts at given time and places. 3. Transport sector output and input. Transport sector inputs are the resources required to deliver transport sector outputs. Transport sector inputs are typically: human resources, particularly skilled resources (including specialists consulting inputs; technology processes such as equipment and work; and finance, both public and private. 4. Transport sector policy and institutional framework; 5. Cause – effect linkages; 6

Impact of Six Sigma in a developing economy: analysis on benefits drawn by Indian industries

Directory of Open Access Journals (Sweden)

Darshak A. Desai

2009-12-01

Full Text Available  Overall operational excellence is the key requirement of any business to have global competence and sustained growth. Indian industries are not the exception to this. Six Sigma has emerged as one of the most effective business improvement strategies world wide.  Nothing much has been published so far illustrating an overall experience of Indian industries with Six Sigma. This paper presents an analysis of the impact of Six Sigma on developing economy like India.  The paper provides an insight into what kind of benefits Indian industries are gaining from Six Sigma as a whole. The study further highlights similarity and differences of benefit gained by different scales and sectors of Indian industries through Six Sigma. This exhaustive analysis of the benefits drawn by Indian industries through Six Sigma can assist other industries in India as well as those in other developing countries, who have yet not experimented with Six Sigma, to become more focused regarding their expectations from this improvement drive. 

[Comparison Analysis of Economic and Engineering Control of Industrial VOCs].

Science.gov (United States)

Wang, Yu-fei; Liu, Chang-xin; Cheng, Jie; Hao, Zheng-ping; Wang, Zheng

2015-04-01

Volatile organic compounds (VOCs) pollutant has become China's major air pollutant in key urban areas like sulfur dioxide, nitrogen oxides and particulate matter. It is mainly produced from industry sectors, and engineering control is one of the most important reduction measures. During the 12th Five-Year Plan, China decides to invest 40 billion RMB to build pollution control projects in key industry sectors with annual emission reduction of 605 000 t x a(-1). It shows that China attaches a great importance to emission reduction by engineering projects and highlights the awareness of engineering reduction technologies. In this paper, a macroeconomic model, namely computable general equilibrium model, (CGE model) was employed to simulate engineering control and economic control (imposing environmental tax). We aim to compare the pros and cons of the two reduction policies. Considering the economic loss of the whole country, the environmental tax has more impacts on the economy system than engineering reduction measures. We suggest that the central government provides 7 500 RMB x t(-1) as subsidy for enterprises in industry sectors to encourage engineering reduction.

Methodology for getting the end use of energy in the industrial sector from Parana State

International Nuclear Information System (INIS)

Haag Filho, A.

1990-03-01

A methodology for a survey on the utilization of energy in the industrial sector from Parana state, at low costs, and aiming the supply of data with the desired reliability and disaggregation is presented. The obtained data shall provide elements for the adoption of short term actions as well as serve as a basis for the elaboration of medium and long terms scenarios. The survey shall be conducted throughout the state, comprising all fields of activity and having the following objectives: determine the state's energetic consumption profile by industrial segment and by end use of energy; determine the state's energetic profile with the spatial distribution of consumption and detect the industrial segments which are more sensitive to the energetic substitution programs and/or of energy conservation. (author)

Sanitary hot water consumption patterns in commercial and industrial sectors in South Africa: Impact on heating system design

International Nuclear Information System (INIS)

Rankin, R.; Rousseau, P.G.

2006-01-01

A large amount of individual sanitary hot water consumers are present in the South African residential sector. This led to several studies being done on hot water consumption patterns in this sector. Large amounts of sanitary hot water are also consumed in the commercial sector in buildings such as hotels and in large residences such as those found in the mining industry. The daily profiles of sanitary hot water consumption are not related to any technical process but rather to human behavior and varying ambient conditions. The consumption of sanitary hot water, therefore, represents a challenge to the electrical utility because it is an energy demand that remains one of the biggest contributors to the undesirable high morning and afternoon peaks imposed on the national electricity supply grid. It also represents a challenge to sanitary hot water system designers because the amount of hot water as well as the daily profile in which it is consumed impacts significantly on system design. This paper deals with hot water consumption in the commercial and industrial sectors. In the commercial sector, we look at hotels and in the industrial sector at large mining residences. Both of them are served by centralized hot water systems. Measured results from the systems are compared to data obtained from previous publications. A comparison is also made to illustrate the impact that these differences will have on sanitary hot water system design. Simulations are conducted for these systems using a simulation program developed in previous studies. The results clearly show significant differences in the required heating and storage capacity for the new profiles. A twin peak profile obtained from previous studies in the residential sector was used up to now in studies of heating demand and system design in commercial buildings. The results shown here illustrate the sanitary hot water consumption profile differs significantly from the twin peaks profile with a very high morning

Competitive Strategies in the Luxury Sector: a Qualitative Comparative Analysis on the Fashion Industry

OpenAIRE

Margherita ANGIONI; Francesco DONINI

2017-01-01

Despite the difficult economic period, companies in luxury sector are showing better results than those in the consumer products market. The objective of this paper is to analyse the competitive strategies in the luxury sector and in particular, in the personal luxury. To this end, we have chosen to study the case of an Italian company (Tod's Group), leader in the personal luxury according to consumers perception. Basing on a theoretical model of competitive strategy, this study shows a compa...

96/97 statistics of natural gas industry in France

International Nuclear Information System (INIS)

1998-01-01

This documents presents an overview of the gases market in France (natural gas, LPG, methane, etc..). Details about uses, resources, foreign supplies, intervening parties, transportation and storage facilities are given for the natural gas sector. After a presentation of the gas industry conjuncture in 1996 and a general presentation of the French gas industry, the main economical data are presented as tables, diagrams and graphics: combustible gases (resources and uses, domestic production and imports, regional and industrial distribution and consumption..), and gas distribution networks (resources, exchanges, transformations, sectoral and seasonal analysis of sales, installations, industrial consumption by sector and region, pipelines, underground storage facilities, LNG terminal and storage facilities, tanker-ships, personnel). (J.S.)

15 years of monitoring occupational exposure to respirable dust and quartz within the European industrial minerals sector.

Science.gov (United States)

Zilaout, Hicham; Vlaanderen, Jelle; Houba, Remko; Kromhout, Hans

2017-07-01

In 2000, a prospective Dust Monitoring Program (DMP) was started in which measurements of worker's exposure to respirable dust and quartz are collected in member companies from the European Industrial Minerals Association (IMA-Europe). After 15 years, the resulting IMA-DMP database allows a detailed overview of exposure levels of respirable dust and quartz over time within this industrial sector. Our aim is to describe the IMA-DMP and the current state of the corresponding database which due to continuation of the IMA-DMP is still growing. The future use of the database will also be highlighted including its utility for the industrial minerals producing sector. Exposure data are being obtained following a common protocol including a standardized sampling strategy, standardized sampling and analytical methods and a data management system. Following strict quality control procedures, exposure data are consequently added to a central database. The data comprises personal exposure measurements including auxiliary information on work and other conditions during sampling. Currently, the IMA-DMP database consists of almost 28,000 personal measurements which have been performed from 2000 until 2015 representing 29 half-yearly sampling campaigns. The exposure data have been collected from 160 different worksites owned by 35 industrial mineral companies and comes from 23 European countries and approximately 5000 workers. The IMA-DMP database provides the European minerals sector with reliable data regarding worker personal exposures to respirable dust and quartz. The database can be used as a powerful tool to address outstanding scientific issues on long-term exposure trends and exposure variability, and importantly, as a surveillance tool to evaluate exposure control measures. The database will be valuable for future epidemiological studies on respiratory health effects and will allow for estimation of quantitative exposure response relationships. Copyright © 2017 The

Iran’s Pharmaceutical Sectoral Innovation System

Directory of Open Access Journals (Sweden)

Bahman Kargar Shahamat

2017-12-01

Full Text Available Abstract By reviewing economic performance, two main phenomena could be identified: The first phenomenon is prior to the third wave of the Industrial Revolution in which limited resources are the predominant input; in other words, physical and natural resources are much more credited than human resources. The second phenomenon resonates with the third wave of industrial revolution to the present time, suggesting the pivotal role of humans in production and accumulation of wealth, in which limited resources are no longer considered as predominant input. The present research seeks to understand the behavioral logic of the players of Iran's pharmaceutical sector so as to infer the innovative treatment of the firms in this sector. The concept of innovative system is indebted to the efforts economists and other scientists have made by analyzing economic development based upon technological development. Meanwhile, sectoral innovation system (SIS is a tool for analyzing a technological sector in the context of evolutionary economics with an emphasis on institutional capabilities. The structure of such an approach is composed of some components through which performance analysis of certain technological sector could be made possible. In research, we use expert panel with 12 experts from Universities, Companies, Governmental institutes. The current study wishes to explain structural model of institutional elements in this technological sector. Subsequently, in light of such an explanation, structural elements of this sector would be analyzed through identification of legal and regulatory framework, innovative culture, innovative infrastructure, financial resources, information resources, technology transfer mechanisms, commercialization support and marketing.

Learning Networks in Innovation Systems at Sector / Regional Level in Argentina: Winery and Dairy Industries

Directory of Open Access Journals (Sweden)

Guillermo Sanchez

2011-11-01

Full Text Available This work studies how the set of relationships that gives place to the learning processes is established in the food industry in Argentina. A theoretical ad hoc approach is adopted, conjugating the concepts of innovation systems at sector / regional level with some context considerations like the innovative behaviour of the global and local food industry and a description of the public and private S&T in Argentina. The study is focused in two cases: the wine industry, at the Mendoza province, and the dairy products industry at the centre of the Santa Fe province, both in Argentina. While the winery industry at the province of Mendoza exports differentiated products the dairy industry, at the central basin of the province of Santa Fe, exports commodities leaving differentiated (functional products for the domestic market. These facts determine different dynamics between them, despite of what the established set of relationships is very complex and knowledge intensive in both cases. Also, in both cases the preponderant contribution of the public institutions of science and technology as knowledge and technology source is flagged.

Industry

Energy Technology Data Exchange (ETDEWEB)

Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

2007-12-01

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

SECTORAL SHARES AND ECONOMIC GROWTH

DEFF Research Database (Denmark)

Ahmad, Nisar; Naveed, Amjad; Naz, Amber

2013-01-01

believe that structural change is an unimportant side effect of the economic development. On the contrary, economists associated with the World Bank and some others posit that growth is brought about by the changes in sectoral composition. The objective of this study is to empirically test...... the relationship between sectoral shares and economic growth by using the panel data for 20 developed countries. The results of the granger causality suggest that both services and agriculture sectors do granger cause economic growth, whereas industrial sector does not granger cause growth. Reverse causality does...... not hold for any of the three sectors. The results of Barro and Non-Barro regressions along with the set of control variables have suggested that services sector is negatively affecting growth, whereas both industrial and agriculture shares are positively affect economic growth....

Occupational Segregation and Its Impact on Gender Wage Discrimination in China's Rural Industrial Sector.

OpenAIRE

Meng, Xin; Miller, Paul

1995-01-01

This paper examines gender wage discrimination in China's newly developed rural industrial sector. The different occupational distributions of men and women are shown to be partly due to discrimination in occupational assignment by the community authorities, but the impact on the gender wage differential of this form of discrimination is not as important as wage discrimination within each occupation. Moreover, it is found that relative to intraoccupational discrimination, interoccupational wa...

Implementing Interoperability in the Seafood Industry: Learning from Experiences in Other Sectors.

Science.gov (United States)

Bhatt, Tejas; Gooch, Martin; Dent, Benjamin; Sylvia, Gilbert

2017-08-01

Interoperability of communication and information technologies within and between businesses operating along supply chains is being pursued and implemented in numerous industries worldwide to increase the efficiency and effectiveness of operations. The desire for greater interoperability is also driven by the need to reduce business risk through more informed management decisions. Interoperability is achieved by the development of a technology architecture that guides the design and implementation of communication systems existing within individual businesses and between businesses comprising the supply chain. Technology architectures are developed through a purposeful dialogue about why the architecture is required, the benefits and opportunities that the architecture offers the industry, and how the architecture will translate into practical results. An assessment of how the finance, travel, and health industries and a sector of the food industry-fresh produce-have implemented interoperability was conducted to identify lessons learned that can aid the development of interoperability in the seafood industry. The findings include identification of the need for strong, effective governance during the establishment and operation of an interoperability initiative to ensure the existence of common protocols and standards. The resulting insights were distilled into a series of principles for enabling syntactic and semantic interoperability in any industry, which we summarize in this article. Categorized as "structural," "operational," and "integrative," the principles describe requirements and solutions that are pivotal to enabling businesses to create and capture value from full chain interoperability. The principles are also fundamental to allowing governments and advocacy groups to use traceability for public good. © 2017 Institute of Food Technologists®.

An Innovation Systems Assessment of the Australian Biofuel Industry. Policy and Private Sector Implications

International Nuclear Information System (INIS)

Nielsen, Jason D.

2006-07-01

A strong biofuel industry in Australia has the potential to provide numerous benefits to the nation and its peoples. The benefits include; reduced emissions of greenhouse gases and harmful particulate matter, a boost to rural development goals, enhanced fuel security and a lower balance of payments. For biofuels to be seriously considered as alternatives to traditional petroleum based automotive fuels they must be economically viable. The findings from a series of Australian Bureau of Agricultural and Resource Economics (ABARE) investigations suggest that ethanol and biodiesel production would be economically viable, in the Australian context, with oil prices in the range of 30-40 USD a barrel. Despite the price of oil being in or above this range for over two years a strong home grown biofuel industry has failed to develop in Australia. The purpose of this master's thesis therefore is to identify the critical issues facing biofuel industry development in Australian and to propose possible policy and private sector strategies for dealing with them. The analysis was done in the following three steps; the first was to map the development of the ethanol and biodiesel industries, the second was to analyse the performance of the industries overtime and the third was to identify the mechanisms which have either induced or blocked their growth. The strategies proposed by this thesis were derived from analysing the inducing and blocking mechanisms and the related issues. The innovation systems approach was chosen because of its ability to provide insights into key industry players, their network interactions and the institutional setup within which they work together to develop, diffuse and use their products. The data needed for the analysis stated above included information related to the development, diffusion and use of ethanol and biodiesel; that is, details about the industry actors and their activities, industry networks, product standards, excise arrangements

An Innovation Systems Assessment of the Australian Biofuel Industry. Policy and Private Sector Implications

Energy Technology Data Exchange (ETDEWEB)

Nielsen, Jason D.

2006-07-15

A strong biofuel industry in Australia has the potential to provide numerous benefits to the nation and its peoples. The benefits include; reduced emissions of greenhouse gases and harmful particulate matter, a boost to rural development goals, enhanced fuel security and a lower balance of payments. For biofuels to be seriously considered as alternatives to traditional petroleum based automotive fuels they must be economically viable. The findings from a series of Australian Bureau of Agricultural and Resource Economics (ABARE) investigations suggest that ethanol and biodiesel production would be economically viable, in the Australian context, with oil prices in the range of 30-40 USD a barrel. Despite the price of oil being in or above this range for over two years a strong home grown biofuel industry has failed to develop in Australia. The purpose of this master's thesis therefore is to identify the critical issues facing biofuel industry development in Australian and to propose possible policy and private sector strategies for dealing with them. The analysis was done in the following three steps; the first was to map the development of the ethanol and biodiesel industries, the second was to analyse the performance of the industries overtime and the third was to identify the mechanisms which have either induced or blocked their growth. The strategies proposed by this thesis were derived from analysing the inducing and blocking mechanisms and the related issues. The innovation systems approach was chosen because of its ability to provide insights into key industry players, their network interactions and the institutional setup within which they work together to develop, diffuse and use their products. The data needed for the analysis stated above included information related to the development, diffusion and use of ethanol and biodiesel; that is, details about the industry actors and their activities, industry networks, product standards, excise arrangements

An Innovation Systems Assessment of the Australian Biofuel Industry. Policy and Private Sector Implications

Energy Technology Data Exchange (ETDEWEB)

Nielsen, Jason D

2006-07-15

A strong biofuel industry in Australia has the potential to provide numerous benefits to the nation and its peoples. The benefits include; reduced emissions of greenhouse gases and harmful particulate matter, a boost to rural development goals, enhanced fuel security and a lower balance of payments. For biofuels to be seriously considered as alternatives to traditional petroleum based automotive fuels they must be economically viable. The findings from a series of Australian Bureau of Agricultural and Resource Economics (ABARE) investigations suggest that ethanol and biodiesel production would be economically viable, in the Australian context, with oil prices in the range of 30-40 USD a barrel. Despite the price of oil being in or above this range for over two years a strong home grown biofuel industry has failed to develop in Australia. The purpose of this master's thesis therefore is to identify the critical issues facing biofuel industry development in Australian and to propose possible policy and private sector strategies for dealing with them. The analysis was done in the following three steps; the first was to map the development of the ethanol and biodiesel industries, the second was to analyse the performance of the industries overtime and the third was to identify the mechanisms which have either induced or blocked their growth. The strategies proposed by this thesis were derived from analysing the inducing and blocking mechanisms and the related issues. The innovation systems approach was chosen because of its ability to provide insights into key industry players, their network interactions and the institutional setup within which they work together to develop, diffuse and use their products. The data needed for the analysis stated above included information related to the development, diffusion and use of ethanol and biodiesel; that is, details about the industry actors and their activities, industry networks, product standards, excise arrangements

PHILIPPINE COCONUT INDUSTRY AND THE INTERNATIONAL TRADE

OpenAIRE

Oniki, Shunji

1992-01-01

This study explores effects of Philippines' coconut policies on the performance in the international market. Analysis of the coconut sector found that the Philippine government successfully changed the structure of the coconut industry during the 1970's using a fund collected as coconut levies. Since the Philippines dominated the international trade market of coconut products, it could exercise dominant market power in the world trade, by integrating the domestic sector. However, the industri...

Greenhouse Gas Emissions Trading for the Transport Sector

International Nuclear Information System (INIS)

Holmgren, Kristina; Belhaj, Mohammed; Gode, Jenny; Saernholm, Erik; Zetterberg, Lars; Aahman, Markus

2006-12-01

In this study we have analysed different options to apply emissions trading for greenhouse gas emissions to the transport sector. The main focus has been on the EU transport sector and the possibility to include it in the current EU ETS in the trading period beginning in 2013. The purpose was to study how different alternatives will affect different actors. Focus has been on three sub-sectors; road transport, aviation and shipping. The railway sector has only been treated on a general level. The study includes the following three parts: 1. An economic analysis of the consequences of greenhouse gas emissions trading for the transport sector including an analysis of how the total cost for reaching an emission target will be affected by an integrated emissions trading system for the transport sector and the industry (currently included sectors) compared to separate systems for the sectors, 2. An analysis of design possibilities for the different sub-sectors. Discussion of positive and negative aspects with different choices of design parameters, such as trading entity, covered greenhouse gases, allocation of emission allowances and monitoring systems, 3. Examination of the acceptance among different actors for different options of using greenhouse gas emissions trading in the transport sector. When setting up an emissions trading scheme there are a number of design parameters that have to be analysed in order to find an appropriate system, with limited administrative and transaction costs and as small distortions as possible to competitiveness

TOURISM, TRADE, EXTERNALITIES, AND PUBLIC GOODS IN A THREE-SECTOR GROWTH MODEL

Directory of Open Access Journals (Sweden)

Wei-Bin Zhang

2015-06-01

Full Text Available The purpose of this study is to introduce tourism, externalities, and public goods to a small-open growth with endogenous wealth and public goods supply. We develop the model on the basis of the Solow-Uzawa growth model, the neoclassical neoclassical growth theory with externalities, and ideas from tourism economics. The economy consists of three – service, industrial, and public - sectors. The production side is based on the traditional growth theories, while the household behavior is described by an alternative utility function proposed by Zhang. We introduce endogenous land distribution between housing and supply of services. The industrial and service sectors are perfectly competitive subject to the government’s taxation. The public sector is financially supported by the government. We introduce taxes not only on producers, but also on consumers’ incomes from wage, land, and interest of wealth, consumption of goods and services, and housing. We simulate the motion of the national economy and show the existence of a unique stable equilibrium. We carry out comparative dynamic analysis with regard to the rate of interest in the global market, the total productivity of the service sector, tax rate on the service sector, tax rate on consumption of services, human capital, the propensity to consume services, and the impact of public services on the productivity of the industrial sector. The comparative dynamic analysis provides some important insights into the complexity of open economies with endogenous wealth, public goods, and externalities.

Energy consumption restricted productivity re-estimates and industrial sustainability analysis in post-reform China

International Nuclear Information System (INIS)

Chen, Shiyi; Santos-Paulino, Amelia U.

2013-01-01

This paper investigates the impact of energy on China's industrial sustainability by using a novel approach to estimate real total factor productivity. The growth accounting indicates that the substantial industrial reforms in China have led to productivity growth. Energy and capital are also important factors driving China's industrial growth. Productivity growth in China's industry is mostly attributable to the high-tech light industrial sectors. - Highlights: ► Productivity has become the most important growth engine in majority of sectors. ► Energy and capital are also important factors promoting China's industrial growth. ► The productivity improvement is more attributable to high-tech light industry. ► The heavy industry performs worse than the light one in terms of productivity

Para-petroleum industry. International context and results of the 2004 French inquiry

International Nuclear Information System (INIS)