WorldWideScience

Sample records for industrial research development

  1. Research and development and industrial informatization

    International Nuclear Information System (INIS)

    1995-08-01

    This book deals with research and development and industrial informatization with development of technology international trend, the present conditions of scientific technology in the major nations, politics of technical development and trend, process of national research and development, research for industrial research and development, strengthen cooperation for scientific technology among nations, current situation and development of technology by field such as energy, software and system, and technology for industrial informatization.

  2. Categories And Utilization Of Industrial Research And Development ...

    African Journals Online (AJOL)

    Research and Development outputs from scientific institutes and utilization of such outputs have been examin-ed. The data and information were drawn from 3 industry-based research Institutes of the Council for Scientific and Industrial Research (CSIR-Ghana), and also from users of the research outputs (such as ...

  3. Industrial workshop on LASL semiconductor radiation-detector research and development

    International Nuclear Information System (INIS)

    Endebrock, M.

    1978-11-01

    An Industrial Workshop on LASL Semiconductor Radiation Detector Research and Development was held at the Los Alamos Scientific Laboratory (LASL) in the spring of 1977. The purpose was to initiate communication between our detector research and development program and industry. LASL research programs were discussed with special emphasis on detector problems. Industrial needs and capabilities in detector research and development were also presented. Questions of technology transfer were addressed. The notes presented here are meant to be informal, as were the presentations

  4. Federal agencies active in chemical industry-related research and development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-29

    The Energy Policy Act of 1992 calls for a program to further the commercialization of renewable energy and energy efficient technologies for the industrial sector.. The primary objective of the Office of Industrial Technologies Chemical Industry Team is to work in partnership with the US chemical industry to maximize economic, energy, and environmental benefits through research and development of innovative technologies. This document was developed to inventory organizations within the federal government on current chemical industry-related research and development. While an amount of funding or number of projects specifically relating to chemical industry research and development was not defined in all organizations, identified were about 60 distinct organizations representing 7 cabinet-level departments and 4 independent agencies, with research efforts exceeding $3.5 billion in fiscal year 1995. Effort were found to range from less than $500 thousand per year at the Departments of Agriculture and the Interior to over $100 million per year at the Departments of Commerce, Defense, Energy, and Health and Human Services and the National Aeronautics and Space Administration. The total number of projects in these programs exceeded 10,000. This document is complete to the extent that agencies volunteered information. Additions, corrections, and changes are encouraged and will be incorporated in future revisions.

  5. Industry Participation in Defence Research and Development,

    Science.gov (United States)

    1983-12-01

    Research and Development: Proposals for Additional Incentives. ASTEC , 1990. K . Interaction between Industry, Higher Education and Government Laboratories...Incentives for Innovation in Australian Industry. ASTEC , 1983. P. Bibliography. Distribution Document Control Data Sheet AWA I A& I 14l2 p/O)OIP (02... ASTEC and the Senate Committee on Science and the Environment. My Department is already preparing advice for me in this regard and I shall ask them to

  6. Research of Talent Development Policy of Online Game Industry

    Directory of Open Access Journals (Sweden)

    Yun-Che Yang

    2003-12-01

    Full Text Available Due to the progress of information technology and the development of Internet, the digital content industry has become one of the most promising industries in the 21st century. The rapid growth of the online gaming industry at the turn of the century does not only catch the eyes of the whole world, but also reshape the entire information-related industry. The purpose of this study is to explore issue of the talent development policy of the domestic online game industry. The method of in-depth interview is used in this study, and the research target is chosen to be qualified of speaking for the government, the education institutes, and the private sectors in the industry. The findings of this research suggest that Taiwan's government should take up a more vigorous responsibility. Following the government's leadership, both education institutes and industry private sectors must actively participate in the collaboration and feed back the up-dated information, such as the market trend and most wanted human resources, to the policy makers.[Article content in Chinese

  7. Developing and Managing University-Industry Research Collaborations through a Process Methodology/Industrial Sector Approach

    Science.gov (United States)

    Philbin, Simon P.

    2010-01-01

    A management framework has been successfully utilized at Imperial College London in the United Kingdom to improve the process for developing and managing university-industry research collaborations. The framework has been part of a systematic approach to increase the level of research contracts from industrial sources, to strengthen the…

  8. Research and Development Financing in the Renewable Energy Industry in Brazil

    Directory of Open Access Journals (Sweden)

    Muriel de Oliveira Gavira

    2014-09-01

    Full Text Available In the last decades, the Brazilian government has put many public policies in place in order to create a favourable environment to promote energy efficiency and clean energy. In this paper we discuss the use of research and development financing support by the clean energy industry in Brazil. To do so, we carried out an empirical research analysing secondary data from legislation, literature case studies, and public and industry reports in order to determine if the companies of the clean energy industry have public financial support to research and development. Our ongoing research shows that, despite incentives to stimulate the dissemination of clean energy, the participation of some of the clean energy is very small (especially solar. We believe that the contributions of this study will assist policy makers, and the whole industry, to improve clean energy research and development investments in Brazil.

  9. Overview of Gas Research Institute's industrial utilization research and development program

    Energy Technology Data Exchange (ETDEWEB)

    Tabb, E S

    1982-05-01

    A combination of technical, economic, political, and environmental constraints hamper industry's ability to use natural gas efficiently. Although the industrial sector has the best potential to absorb the current surplus of natural gas, many industrial users are disenchanged with the high cost, low efficiency, and environmental problems associated with the existing inventory of gas-fired process systems. Consequently, it is essential for an organization like Gas Research Institute (GRI), which has a national scope and a mandate to generate energy end-use benefits for the industrial gas consumer, to assume a leadership role in the development program aimed, not only at upgrading the energy efficiency of industrial process equipment, but at increasing its production capability while meeting environmental standards.

  10. Research on Dongguan Mobile Phone Industry Development Status from the Patent Perspective

    OpenAIRE

    Qiu Yu

    2017-01-01

    [Purpose/significance] Through the analysis of the patent of five Dongguan mobile phone industries, this paper aims at providing information references for the development of Dongguan mobile phone industry. [Method/process] This paper first introduced the basic information of the mobile phone industry in our country, selected Dongguan mobile phone industry patents as the research object, and analyzed overall development trend--the general situation and the trend of applicants, inventors and I...

  11. Sports Nutrition Food Industry Chain Development Research

    OpenAIRE

    Jie Yin

    2015-01-01

    Through the study of Henan sports nutrition food industry chain optimization, the study analyses development advantage and competitive advantage of Henan in sports nutrition food industry chain and existing problems and challenges in Henan sports nutrition food industry chain and at the same time introduces the theory of supply chain management to the development of sports nutrition food industry chain, clearly optimizes countermeasures of sports nutrition food industry chain. Pointing out sp...

  12. Research on the development for emerging industries in Nantong under the national strategy

    Science.gov (United States)

    Li, Zhongnian; Qin, Yan; Zhang, Lijuan; Li, Tianying; Wang, Qing

    2017-08-01

    In this paper, according to the relevant national strategic emerging industry planning and policy, conducted in-depth research on the development of emerging industries in Nantong, and believes that current economic social development in Nantong has been entered into a new normal period, in the new period to “innovation” as the core characteristics, strategic emerging industry opportunities and challenges facing the industry. Therefore, Nantong should persist in innovation driven, focus on the cultivation and development of new industries, to provide new impetus to Nantong’s economic vitality and development. According to the development and upgrading of traditional industries, and expand the advantages of industry, cultivate new industries, for each kind of industry to come up with specific development strategies and suggestions: Nantong municipal government will be the seven emerging industries four in the industry (i.e., new material industry, new energy industry, new information technology industry, high-end equipment manufacturing industry) as the development object, further “bigger and stronger”, and strive to enhance the industrial scale and the formation of local characteristics as soon as possible.

  13. Eco-friendly Development Of Industry

    International Nuclear Information System (INIS)

    An, Gi Cheol; Park, Hun; Lee, Dong Jin; Ryu, Sang Hui

    1998-02-01

    This book reports eco-friendly development of industry, which has summary on bring up the issue and research way and system of research. It deals with current state of affairs on eco-friendly development of industry and the case of developed countries such as necessity and meaning of eco-friendly development industry, prospect and change of the tendency, environmental issue by field in Korea like the steel industry, nonferrous metal industry, auto industry, and cement industry and general policy for eco-friendly development of industry.

  14. FY2000 survey report research and development internationalization in industrial sector among APEC economies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    A survey is conducted and a database is constructed on internationalization of research and development activities in the industrial sectors of APEC (Asia-Pacific Economic Cooperation Conference) countries, namely, on research and development support systems, research and development appropriations, research and development personnel, research VISA granting procedures and control over foreign funds, trends of research and development among private sector businesses, main research and development organizations, evaluation by private sector businesses of the research and development environments of their countries, and the like. Incorporated into the database are Australia, Brunei, Canada, Chile, China, Hong Kong, Indonesia, Japan, Korea, Malaysia, Mexico, New Zealand, Papua New Guinea, Peru, Philippines, Russia, Singapore, Chinese Taipei, Thailand, United States, and Vietnam. The database, compiled for Internet web pages, CD-ROMs, and publications, covers the industrial technology related policies of all the countries and helps understand the research and development systems, and enables access to main research organizations. The database comprises a general section dealing with the background, system constitution, and internationalization trend and a countries section collecting information on the respective countries. (NEDO)

  15. Strengthening industry-research linkage for small scale industrial ...

    African Journals Online (AJOL)

    Strengthening industry-research linkage for small scale industrial development in Ghana - the relevance of scientific and technological information. ... Journal of Applied Science and Technology. Journal Home · ABOUT · Advanced Search ...

  16. [Example of product development by industry and research solidarity].

    Science.gov (United States)

    Seki, Masayoshi

    2014-01-01

    When the industrial firms develop the product, the research result from research institutions is used or to reflect the ideas from users on the developed product would be significant in order to improve the product. To state the software product which developed jointly as an example to describe the adopted development technique and its result, and to consider the modality of the industry solidarity seen from the company side and joint development. The software development methods have the merit and demerit and necessary to choose the optimal development technique by the system which develops. We have been jointly developed the dose distribution browsing software. As the software development method, we adopted the prototype model. In order to display the dose distribution information, it is necessary to load four objects which are CT-Image, Structure Set, RT-Plan, and RT-Dose, are displayed in a composite manner. The prototype model which is the development technique was adopted by this joint development was optimal especially to develop the dose distribution browsing software. In a prototype model, since the detail design was created based on the program source code after the program was finally completed, there was merit on the period shortening of document written and consist in design and implementation. This software eventually opened to the public as an open source. Based on this developed prototype software, the release version of the dose distribution browsing software was developed. Developing this type of novelty software, it normally takes two to three years, but since the joint development was adopted, it shortens the development period to one year. Shortening the development period was able to hold down to the minimum development cost for a company and thus, this will be reflected to the product price. The specialists make requests on the product from user's point of view are important, but increase in specialists as professionals for product

  17. 48 CFR 206.302-3 - Industrial mobilization; or engineering, development, or research capability.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Industrial mobilization; or engineering, development, or research capability. 206.302-3 Section 206.302-3 Federal Acquisition... COMPETITION REQUIREMENTS Other Than Full and Open Competition 206.302-3 Industrial mobilization; or...

  18. Nanotechnology research and development for military and industrial applications

    Science.gov (United States)

    Ruffin, Paul B.; Brantley, Christina L.; Edwards, Eugene; Roberts, J. Keith; Chew, William; Warren, Larry C.; Ashley, Paul R.; Everitt, Henry O.; Webster, Eric; Foreman, John V.; Sanghadasa, Mohan; Crutcher, Sihon H.; Temmen, Mark G.; Varadan, Vijay; Hayduke, Devlin; Wu, Pae C.; Khoury, Christopher G.; Yang, Yang; Kim, Tong-Ho; Vo-Dinh, Tuan; Brown, April S.; Callahan, John

    2011-04-01

    Researchers at the Army Aviation and Missile Research, Development, and Engineering Center (AMRDEC) have initiated multidiscipline efforts to develop nano-based structures and components for insertion into advanced missile, aviation, and autonomous air and ground systems. The objective of the research is to exploit unique phenomena for the development of novel technology to enhance warfighter capabilities and produce precision weapons. The key technology areas that the authors are exploring include nano-based microsensors, nano-energetics, nano-batteries, nano-composites, and nano-plasmonics. By integrating nano-based devices, structures, and materials into weaponry, the Army can revolutionize existing (and future) missile systems by significantly reducing the size, weight and cost. The major research thrust areas include the development of chemical sensors to detect rocket motor off-gassing and toxic industrial chemicals; the development of highly sensitive/selective, self-powered miniaturized acoustic sensors for battlefield surveillance and reconnaissance; the development of a minimum signature solid propellant with increased ballistic and physical properties that meet insensitive munitions requirements; the development of nano-structured material for higher voltage thermal batteries and higher energy density storage; the development of advanced composite materials that provide high frequency damping for inertial measurement units' packaging; and the development of metallic nanostructures for ultraviolet surface enhanced Raman spectroscopy. The current status of the overall AMRDEC Nanotechnology research efforts is disclosed in this paper. Critical technical challenges, for the various technologies, are presented. The authors' approach for overcoming technical barriers and achieving required performance is also discussed. Finally, the roadmap for each technology, as well as the overall program, is presented.

  19. Research partnerships between business researchers and industry

    NARCIS (Netherlands)

    Zalewska-Kurek, Katarzyna; Janßen, Björn; Harms, Rainer

    2016-01-01

    We study the strategic behaviour of management researchers when establishing research partnerships with industry. To this end we developed a framework distinguishing ‘strategic planned’ and ‘opportunity-driven’ behaviour in the process of establishing and managing research partnerships. We also

  20. University of Tennessee - Industry collaborative research and development in preventive maintenance technology

    International Nuclear Information System (INIS)

    Upadhyaya, B.R.

    1992-01-01

    The Preventive Maintenance Engineering Laboratory (PMEL) was inaugurated at the University of Tennessee Nuclear Engineering Department in September 1989. The startup funding was provided by Gilbert/Commonwealth, Inc. The purpose of PMEL is to identify maintenance-related problems in the power and process industries and to find their solutions through the development and application of emerging technologies. These include advanced digital signal processing, applied artificial intelligence (AI), artificial neural networks, and reliability based methods. The Laboratory activities are being expanded by the formation of an industrial consortium within the Measurement and Control Engineering Center at the University of Tennessee. Several research and development projects in preventive maintenance are being carried out. These include condition monitoring of air operated valves, automated diagnostics of motor operated valves, instrument calibration, verification, and estimation of expected residual life of electric motors using applied AI technology and reliability-based methods. The new methodology will be applied to other industrial subsystems. A long-term research and development project is being sponsored by the T.V.A. Nuclear Maintenance Department. The overall objective of the research program is to develop and apply advanced artificial intelligence and information processing methods to the problems of plant performance monitoring and preventive maintenance. The program includes the development of a workstation/PC-based, networking of plant information for easy access to operational and management personnel, implementation of a sensor verification system, monitoring of feedwater flow venturi fouling and heat rate balance, and integration of signal validation, command validation, and fault-tolerant control strategies

  1. ACCELERATING CONSTRUCTION INDUSTRY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Mohan M. Kumaraswamy

    2006-06-01

    Full Text Available The needs for construction industry development are initially viewed from the broader perspectives of imperatives for infrastructure development and national development. All these are clearly more critical in developing countries. A non-exhaustive set of potential drivers and common barriers to construction industry development is identified from previous research. These suggest the usefulness of consolidating a cluster of recent proposals and exercises aiming at (a construction organization development in terms of an over-arching management support system model, as well as improved information and knowledge management; and (b project team development in the context of relationally integrated teams and supply chains, joint risk management and ‘technology and knowledge exchange’ in joint ventures, as well as longer term public private partnerships. These apparently disparate research thrusts are threaded together into a pattern that may inspire, if not feed, specific research and development (R & D agendas for construction industry development in different countries according to their own priorities, constraints and stages of infrastructure and national development.

  2. Industrial Technologies Program Research Plan for Energy-Intensive Process Industries

    Energy Technology Data Exchange (ETDEWEB)

    Chapas, Richard B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Colwell, Jeffery A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2007-10-01

    In this plan, the Industrial Technologies Program (ITP) identifies the objectives of its cross-cutting strategy for conducting research in collaboration with industry and U.S. Department of Energy national laboratories to develop technologies that improve the efficiencies of energy-intensive process industries.

  3. Addressing Responsible Research and Innovation to Industry

    DEFF Research Database (Denmark)

    Yaghmaei, Emad

    2015-01-01

    Responsible research and innovation (RRI) is taking a role to assist all types of stakeholders including industry to move research and innovation initiatives to responsible manner for tackling grand challenges. The literature on RRI focuses little on how industry can implement RRI principles...... models of corporate social responsibility (CSR) literature. Drawing on these models, this study develops stages and dimensions of RRI for discussing why industry should become engaged in RRI, how industry can embed RRI principles into research and innovation processes, how companies progress from one RRI....... In solving such gap in the literature, this article constructs a solid framework that provides a conceptual starting point for future research on levels of RRI. It draws a fundamental path to align industrial activities with environmental and societal needs. The framework develops a normatively grounded...

  4. Industry-identified combustion research needs: Special study

    Energy Technology Data Exchange (ETDEWEB)

    Keller, J.G.; Soelberg, N.R.; Kessinger, G.F.

    1995-11-01

    This report discusses the development and demonstration of innovative combustion technologies that improve energy conservation and environmental practices in the US industrial sector. The report includes recommendations by industry on R&D needed to resolve current combustion-related problems. Both fundamental and applied R&D needs are presented. The report assesses combustion needs and suggests research ideas for seven major industries, which consume about 78% of all energy used by industry. Included are the glass, pulp and paper, refinery, steel, metal casting, chemicals, and aluminum industries. Information has been collected from manufacturers, industrial operators, trade organizations, and various funding organizations and has been supplemented with expertise at the Idaho National Engineering Laboratory to develop a list of suggested research and development needed for each of the seven industries.

  5. Wind power - research and development. The wind turbine industry's view of the promotion of state-supported research and development

    International Nuclear Information System (INIS)

    Kroh, S.

    1995-10-01

    The windmill industry in Denmark is currently confronted with making a choice between competing technologies so that the role of the stimulus of state subsidies for research has lately increased in importance. The Ministry of Energy, it is claimed, must be aware of this as possibilities for making use of research results are dictated by the market and competition. The industry is not sympathetic to the idea of state research contracts with specified goals for which manufacturers must produce a technical solution. Consultancy firms should work towards solving general problems which could help the industry as a whole. Wind turbines which are cheap to produce and operate are of more interest to industry than those which are technologically advanced or of a lighter construction. It is not thought to be advantageous to concentrate the allocation of subsidies on one key project chosen by the Ministry itself, such as the current intense interest in turbine blades. Aerodynamics, noise pollution and materials are considered as more vital areas for research. A special interest in smaller windmills is not currently relevant. Evaluations of the quality of research projects demanding subsidies should be more critical. A detailed list of subjects within this field which are considered as being relevant for research is given. The Danish windmill industry advises a centralized wind power research institution and a gradual shift of the test station at Risoe National Laboratory to Jutland as wind conditions at Risoe are not considered satisfactory. A better communication between Risoe test station and the wind power industry is recommended. (AB)

  6. Research advances in industrial engineering

    CERN Document Server

    2015-01-01

    This book provides discussions and the exchange of information on principles, strategies, models, techniques, methodologies and applications of industrial engineering. It communicates the latest developments and research activity on industrial engineering and is useful for all those interested in the technological challenges in the field.

  7. Office of Industrial Technologies research in progress

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

  8. The Research of Scrapped Automobiles Recycling and Disassembling Industry Development Based on Auto Industry Chain

    Directory of Open Access Journals (Sweden)

    linhua Pang

    2015-01-01

    Full Text Available The number of China’s scrapped car is on an explosively growing trend, and the development of scrapped car recycling industry has a golden prospect. The current scrapped car recycling system is not perfect in our country, because related industries driven by market develop slowly, and there are some outstanding problems such as potential safety risks, environmental pollution and resource waste. The paper analyzes and studies the existing problems and countermeasures to investigate the development strategy of scrapped car recycling industry according to the whole automobile industry chain construction, technology and equipment conditions, policy guidance, etc. and at last explore the new industrial development pattern of serving automobile reverse design.

  9. Federal laboratory nondestructive testing research and development applicable to industry

    Energy Technology Data Exchange (ETDEWEB)

    Smith, S.A.; Moore, N.L.

    1987-02-01

    This document presents the results of a survey of nondestructive testing (NDT) and related sensor technology research and development (R and D) at selected federal laboratories. Objective was to identify and characterize NDT activities that could be applied to improving energy efficiency and overall productivity in US manufacturing. Numerous federally supported R and D programs were identified in areas such as acoustic emissions, eddy current, radiography, computer tomography and ultrasonics. A Preliminary Findings Report was sent to industry representatives, which generated considerable interest.

  10. Integrated design optimization research and development in an industrial environment

    Science.gov (United States)

    Kumar, V.; German, Marjorie D.; Lee, S.-J.

    1989-01-01

    An overview is given of a design optimization project that is in progress at the GE Research and Development Center for the past few years. The objective of this project is to develop a methodology and a software system for design automation and optimization of structural/mechanical components and systems. The effort focuses on research and development issues and also on optimization applications that can be related to real-life industrial design problems. The overall technical approach is based on integration of numerical optimization techniques, finite element methods, CAE and software engineering, and artificial intelligence/expert systems (AI/ES) concepts. The role of each of these engineering technologies in the development of a unified design methodology is illustrated. A software system DESIGN-OPT has been developed for both size and shape optimization of structural components subjected to static as well as dynamic loadings. By integrating this software with an automatic mesh generator, a geometric modeler and an attribute specification computer code, a software module SHAPE-OPT has been developed for shape optimization. Details of these software packages together with their applications to some 2- and 3-dimensional design problems are described.

  11. Research on the development strategy of Pingdingshan iron and steel industry cluster with Wugang Company as the core

    Directory of Open Access Journals (Sweden)

    Wang Shuai

    2017-01-01

    Full Text Available Arouse the great potential of the industrial clusters will play a significant role in promoting the development of local WuGang company. The article takes the Pingdingshan City as the research object, who is a typical resource-based city and develops on the basis of the local resources of coal and iron ore, the core enterprise WuGang Company is a large state-owned enterprise based on the wide and thick steel plate production. Many problems also exit in the cluster innovation, company network construction, company cooperation. The article is from the perspective of steel industry cluster and cluster innovation. Firstly, the article introduces the correlation theory about the steel industry cluster and the basic development information of Pingdingshan steel industry cluster, and promotes the research purpose and meaning.The article will give the analysis to the problems from the Pingdingshan steel industry cluster and develop the reform proposals and development strategy according to the actual situation.

  12. Research and development of zirconium industry in China

    International Nuclear Information System (INIS)

    Liu Jianzhang; Tian Zhenye

    2001-01-01

    The development of uranium material for nuclear power and silicon material for information industry represents two revolutionary changes in the material field in 20-th century. The development of these kinds of materials not only brings about great revolution of technology in the material field, but also promotes the great advancement of the world economy. Zirconium or its alloy, as one of the most important material in atomic age, just as the same as foreign countries has been developed under promotion of nuclear submarine project in China, and building of civil nuclear power reactor then has been laid a solid foundation for zirconium industry and provide a broad market for zirconium material

  13. A research on industrial development of radiation sterilization in Sichuan

    International Nuclear Information System (INIS)

    Chen Xun; Zhu Rong; Chen Jigang

    2010-01-01

    Radiation sterilization is widely applied in food processing, Pharmaceutical Manufacturing and medical instrumentation producing. As this industry offers service to related corporations, its development depends largely on the market scale of the relevant industries. This article mainly discusses the balance point between the capacity of radiation sterilization and the requirement of its market. There are less than 1% of the companies in Sichuan which using radiation sterilization for its products, broad prospects has shown in this field. The output value of radiation sterilization industry reached 0.1% of the GDP in some advanced countries (America and Japan...), under this standard, its output value in Sichuan province would be RMB1.2 hundred million, but now our capacity and scale of this industry is less than RMB40million.Research shows: there are 3 key points to make its output value reach 0.1% of the GDP in Sichuan: 1. Breaking the 'bottleneck' restrictions of capacity and Inappropriate resources distribution. 2. Promoting the technique of radiation sterilization, guiding corporation to reduce their dependence on food additive from the perspective of food safety, make effective implantation of radiation sterilization into their manufacture processes. 3. Increasing publicity for radiation sterilization, eliminating scared mentality among customer on nuclear technology, helping manufacturing corporations to establish green environmental protection brand, directing our customer to a more healthy awareness. (authors)

  14. The EC Maritime Industries Forum 1992: Marine resources and research and development

    International Nuclear Information System (INIS)

    Jenisch, U.K.

    1993-01-01

    The Maritime Industries Forum (MIF) of the European Community has prepared a comprehensive report covering all the EC maritime industries. The report, published on October 29, 1992, addresses maritime activities such as shipbuilding, shipping, fishing, energy, marine resources and environmental protection. Focal points are research and development measures and strategies. A major objective is to strengthen the competitiveness of the maritime industries via a global and horizontal approach. This paper briefly analyses the M.I.F. Report and concentrates on the EC interests in the field of marine resources such as oil and gas, potable water, aquaculture and fishing, minerals, OTEC/DOWA as well as the environmentally sound technology that is required to allow for a future oriented and sustainable exploitation. Export opportunities for such new technologies and cooperation with third states are an important objective. The proposals of the M.I.F. Report are of a positive, future-oriented nature, appropriate to replace many of the hitherto defensive policies in the maritime area. The industries recognize the responsibility for the revitalization of their industrial sectors. The method of this broad sectoral approach for a new industrial policy in Europe is innovative and a model in itself. With the installation of three specialized new industrial panels in January 1993 the work continues

  15. Assessment of industry needs for oil shale research and development

    Energy Technology Data Exchange (ETDEWEB)

    Hackworth, J.H.

    1987-05-01

    Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry's view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

  16. Research on the path of synergetic development between logistics industry and the leading industry in Fujian province

    Directory of Open Access Journals (Sweden)

    Mei Qiaoping

    2017-01-01

    Full Text Available Logistics industry is closely related to other industry, the synergetic development between logistics industry and leading industry is benefit for leading industry to reduce costs, improve efficiency and promote industrial upgrading. This book analyzes the association of logistics industry and leading industry on the basis of the input-output tables of Fujian and proposes advises to promote their synergetic development based on the calculation.

  17. Scenario research: The food industry in 2010

    DEFF Research Database (Denmark)

    Stacey, Julia; Sonne, Anne-Mette; Jensen, Birger Boutrup

    2001-01-01

    What kind of foods will the consumers choose to buy in 2010? Will they be buying organic foods, functional foods or go for the cheapest products? Nobody can predict the future. However, by using scenario techniques qualified indications on future developments can be put together. Researchers...... at MAPP and the Department of Manufacturing Engineering and Management, The Technical University of Denmark have constructed three scenarios about the Danish food industry in 2010. The aim has been to identify the demands the food industry can expect to meet in the future plus which research areas...... the public research should prioritise in order to support the development of competences within the food industry. The scenarios are isolated developments. In practise, the future is likely to be a combination of the different tendencies within the scenarios. The first scenario 'Naturalness' has focus...

  18. Lunar Industry & Research Base Concept

    Science.gov (United States)

    Lysenko, J.; Kaliapin, M.; Osinovyy, G.

    2017-09-01

    Currently, all main space industry players, such as Europe, USA, Russia, China, etc., are looking back again at the idea of Moon exploration building there a manned lunar base. Alongside with other world spacefaring nations, Yuzhnoye State Design Office with its long-time development experience, technological and intellectual potential, organized its own conceptual work on development of the Lunar Industry & Research Base. In the frames of conceptual project "Lunar Industrial & Research Base" were formed its appearance, preliminary configuration and infrastructure at different stages of operation, trajectory and flight scheme to the Moon, as well as terms of the project's realization, and main technical characteristics of the systems under development, such as space transportation system for crew and cargo delivery to lunar surface and return to Earth, standardized designs of lunar modules, lunar surface vehicles, etc. The "Lunar Industrial & Research Base" project's preliminary risk assessment has shown a high value of its overall risk due to the lack of reliable information about the Moon, technical risks, long-term development of its elements, very high financial costs and dependence on state support. This points to the fact that it is reasonable to create such a global project in cooperation with other countries. International cooperation will expand the capabilities of any nation, reduce risks and increase the success probability of automated or manned space missions. It is necessary to create and bring into operation practical mechanisms for long-term space exploration on a global scale. One of the ways to do this is to create a multinational agency which would include both state enterprises and private companies.

  19. 77 FR 36606 - Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public Meeting

    Science.gov (United States)

    2012-06-19

    ...: Threat Prevention --Working Group 2: Leak Detection/Mitigation & Storage --Working Group 3: Anomaly... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID PHMSA-2012-0146] Pipeline Safety: Government/Industry Pipeline Research and Development Forum, Public...

  20. Research on the competitiveness and development strategy of china's modern coal chemical industry

    Science.gov (United States)

    Wang, Q.; Han, Y. J.; Yu, Z. F.

    2016-08-01

    China's modern coal chemical industry has grown into a certain scale after over a decade of development, and remarkable progress has been made in key technologies. But as oil price collapsed since 2015, the economic benefit of the industry also slumped, with loud controversies in China over the necessity of modern coal chemical industry. The research believes that the modern coal chemical industry plays a positive role in the clean and sustainable exploitation of coal in China. It makes profit when oil price is no lower than 60/bbl, and outperforms petrochemical in terms of cost effectiveness when the price is between 60/bbl and 80/bbl. Given the low oil price and challenges posed by environmental protection and water restraints, we suggest that the state announce a guideline quickly, with adjusted tax policies and an encouragement to technological innovation, so that the modern coal chemical industry in China can grow sound and stable.

  1. Innovation, Procurement and Construction Industry Development

    Directory of Open Access Journals (Sweden)

    Geard de Valence

    2010-12-01

    Full Text Available The implications for analysis of innovation in construction of theoretical developments in industrial organisation are considered in this research, as an attempt to outline a new approach to construction innovation incorporating the ideas found in knowledge based, technology centred models. The paper firstly summarises characteristics of the construction industry, focusing on their effects on innovation, before surveying some of the ideas about the sources of innovation and the expansion and application of knowledge. Construction can be seen as an industry with limited scope for knowledge externalities, where the procurement methods used by the industry’s clients do not pay for innovation. The following discussion uses recent developments in the research on the economics of innovation and industrial organization theory, such as research intensity and the endogenous sunk costs in competitive, fragmented, low research intensity industries. The effects on R&D of procurement methods and on industry structure are discussed, with a focus on the appropriability of innovations and the role of the client on the Heathrow Terminal 5 project. The paper concludes that the procurement methods used for building and construction projects appears to be a determining factor in the level of innovation in the construction industry

  2. Research and chemical industry in 90's

    International Nuclear Information System (INIS)

    Trapasso, I.

    1992-01-01

    This paper examines the importance of research with respect to changes taking place within the chemical industry. Specific areas having a significant impact on the future evolution of the industry are identified. The chemical industry is highly R ampersand D intensive with respect to its overall sales volume, as well as, to R ampersand D levels in other industries; and R ampersand D has been a dominant factor influencing the restructuring, on a global scale, of this industry. In the 90's, the industry is expected to have a supply model which is based on the production of marketable high-technology products and integrated systems, developed through coordinated research in multi-disciplinary scientific fields. The optimum strategic and organizational strategies which are to be adopted by the industry during this decade are discussed with reference to the directions being taken by a large multi-national firm in developing strategies in various areas, e.g., new prime materials, environmental protection, pharmacology, and biotechnology. A look is given at recent developments in the sector of advanced polymers, with attention given to processes involving polymer genetics, new products with a wide range of applications and those offering a high level of environmental compatibility. A review of new materials development includes an assessment of prospects for biodegradable plastics based on natural carbohydrates

  3. TELEMAN - an European community research and development programme on robotics in the nuclear industry

    International Nuclear Information System (INIS)

    Tolley, B.; Robertson, B.

    1991-01-01

    The TELEMAN Programme is a five year cost-shared research programme covering remote handling in hazardous and disordered nuclear environments. It is supported within the current research and development of the European Communities. TELEMAN's strategic objective is to develop advanced teleoperators that respond to the needs of the nuclear industry. Its technical objective is to strengthen the scientific and engineering bases upon which the design of teleoperators for use throughout the nuclear industry rests. This will be done by providing new solutions to problems of manipulation, material transport and mobile surveillance in nuclear environments and by demonstrating their feasibility. Motivation for such a programme lies in the potential teleoperators have to improve the separation of workers from radioactive equipment. This technology will also enable plant operators and public authorities to deal more effectively with nuclear abnormal incidents and increase gains in productivity, mainly in the repair and maintenance area. Community support is justified by the cost of the reliability and autonomy required for the nuclear teleoperator, the need to rationalise R and D investment in an area of increasing industrial potential and a common interest in coherent responses to emergencies. (author)

  4. Presentation of a Novel Model for Evaluation of Commercialization of Research and Development: Case Study of the Pharmaceutical Biotechnology Industry.

    Science.gov (United States)

    Emami, Hassan; Radfar, Reza

    2017-01-01

    The current situation in Iran suggests an appropriate basis for developing biotechnology industries, because the patents for the majority of hi-tech medicines registered in developed countries are ending. Biosimilar and technology-oriented companies which do not have patents will have the opportunity to enter the biosimilar market and move toward innovative initiatives. The present research proposed a model by which one can evaluate commercialization of achievements obtained from research with a focus on the pharmaceutical biotechnology industry. This is a descriptive-analytic study where mixed methodology is followed by a heuristic approach. The statistical population was pharmaceutical biotechnology experts at universities and research centers in Iran. Structural equations were employed in this research. The results indicate that there are three effective layers within commercialization in the proposed model. These are a general layer (factors associated with management, human capital, legal infrastructure, communication infrastructure, a technical and executive infrastructures, and financial factors), industrial layer (internal industrial factors and pharmaceutical industry factors), and a third layer that included national and international aspects. These layers comprise 6 domains, 21 indices, 41 dimensions, and 126 components. Compilation of these layers (general layer, industrial layer, and national and international aspects) can serve commercialization of research and development as an effective evaluation package.

  5. Physics and Industrial Development - Proceedings of the 2nd International Conference on Physics and Industrial Development

    Science.gov (United States)

    Gazzinelli, R.; Moreira, R. L.; Rodrigues, W. N.

    1997-04-01

    The Table of Contents for the full book PDF is as follows: * Preface * Sponsors * Committees * Opening Lecture * Relations between Science and Industry in Brazil * Technological Change and Economic Development * Science and Economic Development * Recent Technological Change and Industrial Dynamics * Technology and Economic Development: Suitability of the Institutional System of Minais Gerais * Bridging the Gap * Transfer of Scientific Results into Industry: A Controversial Problem in Central and Eastern Europe * Bridging the Gap Between Basic Research and Industrial Development at the J. STEFAN Institute * Liquid Crystals: A Case Study of the Interaction Between Science and Application * Role of Physics in the Modern Industrialization Process of Korea * Research in Industry * A Theoretical Physicist's 21-Year Experience in the Argentine Industry * Four Characters in Search of a Profession * Status and Prospects for the Use of Renewable Sources of Energy in Minas Gerais State-Brazil * University-Industry Cooperation I * Development and Industrialization of Fiber Optics Metrology Equipment * Finnish Experiences on University-Industry Collaboration in Materials Science and Physical Metallurgy * A Conceptual Framework for Understanding the Interaction between Academic Research and Industry * Technological Modernization of the Alkaline Cooking Process for the Production of Masa and Tortilla * The Fapergs Program on University Versus Private Enterprise * Integral Development Centers: Tying Mexican Industry With the National Polytechnic Institute * Materials Characterization and Applied Physics * Imaging Manganese Sulfide Inclusions in Grain Oriented Silicon Steels * Electrical Resistivity Changes Associated to Static Strain Aging in High Carbon Steel * PVD Hard Coatings for Wear Applications * Scanning Acoustic Microscopy: Application to Porous Materials * Indentation Testing of Thennal Sprayed WC-Co * Applications of Capillary Electrophoresis with Laserinduced

  6. Social capital for industrial development: operationalizing the concept

    NARCIS (Netherlands)

    P. Knorringa (Peter); I.P. van Staveren (Irene)

    2006-01-01

    textabstractThe present report on Social capital for industrial development: operationalizing the concept is part of the broader Combating Marginalization and Poverty through Industrial Development (COMPID), research programme of the United Nations Industrial Development Organization (UNIDO),

  7. Government-industry-uUniversity and rResearch lLaboratories cCoordination for new product development: Session 2. Government research laboratory perspective

    International Nuclear Information System (INIS)

    Kuzay, T.M.

    1997-01-01

    This talk is the second in an expanded series of presentations on the Government-Industry-University and Research Laboratories Coordination for new product development, which is a timely and important public policy issue. Such interactions have become particularly timely in light of the present decline in funding for research and development (R ampersand D) in the nation''s budget and in the private sector. These interactions, at least in principle, provide a means to maximize benefits for the greater good of the nation by pooling the diminishing resources. National laboratories, which traditionally interacted closely with the universities in educational training, now are able to also participate closely with industry in joint R ampersand D thanks to a number of public laws legislated since the early 80s. A review of the experiences with such interactions at Argonne National Laboratory, which exemplifies the national laboratories, shows that, despite differences in their traditions and the missions, the national laboratory-industry-university triangle can work together

  8. Superconducting analogue electronics for research and industry

    International Nuclear Information System (INIS)

    Winkler, D

    2003-01-01

    This paper gives a brief review of superconducting electronics in research and industry. Examples will show how science benefits from the development and how superconducting devices have found their way into industry and to some commercial products. Impact in terms of enabling new research in other fields (e.g. radio astronomy, medicine), in industry (certification, safety, metrology, etc) and in terms of market will be addressed. From the examples, two fields will be emphasized: superconducting detectors for astronomy and the superconducting quantum interference devices (SQUIDs) employed for different applications

  9. Technology Roadmap Research Program for the Steel Industry

    Energy Technology Data Exchange (ETDEWEB)

    Joseph R. Vehec

    2010-12-30

    The steel industry's Technology Roadmap Program (TRP) is a collaborative R&D effort jointly sponsored by the steel industry and the United States Department of Energy. The TRP program was designed to develop new technologies to save energy , increase competitiveness, and improve the environment. TRP ran from July, 1997 to December, 2008, with a total program budget of $38 million dollars. During that period 47 R&D projects were performed by 28 unique research organizations; co-funding was provided by DOE and 60 industry partners. The projects benefited all areas of steelmaking and much know-how was developed and transferred to industry. The American Iron and Steel Institute is the owner of all intellectual property developed under TRP and licenses it at commercial rates to all steelmakers. TRP technologies are in widespread use in the steel industry as participants received royalty-free use of intellectual property in return for taking the risk of funding this research.

  10. Research, Commercialization, & Workforce Development in the Polymer/Electronics Recycling Industry

    Energy Technology Data Exchange (ETDEWEB)

    Carl Irwin; Rakesh Gupta; Richard Turton; GangaRao Hota; Cyril Logar; Tom Ponzurick; Buddy Graham; Walter Alcorn; Jeff Tucker

    2006-02-01

    The Mid-Atlantic Recycling Center for End-of-Life Electronics (MARCEE) was set up in 1999 in response to a call from Congressman Alan Mollohan, who had a strong interest in this subject. A consortium was put together which included the Polymer Alliance Zone (PAZ) of West Virginia, West Virginia University (WVU), DN American and Ecolibrium. The consortium developed a set of objectives and task plans, which included both the research issues of setting up facilities to demanufacture End-of-Life Electronics (EoLE), the economics of the demanufacturing process, and the infrastructure development necessary for a sustainable recycling industry to be established in West Virginia. This report discusses the work of the MARCEE Project Consortium from November 1999 through March 2005. While the body of the report is distributed in hard-copy form the Appendices are being distributed on CD's.

  11. Association between Local Illumination and Visual Fatigue among the Research and Development Staffs of Industry

    Directory of Open Access Journals (Sweden)

    A.R. Mashkoori

    2016-12-01

    Full Text Available Abstract Aims: Work proper lighting means a safe, healthy and comfort conditions for work under a lighting system that includes qualitative and quantitative features. This study aimed to evaluate the surface local lighting of works and eye fatigue among research and development staffs of an automotive industry. Instrument & Methods: In this descriptive study in Research and Development Department of an automotive industry in 2015, 126 official staffs were selected randomly. A demographic questionnaire and the Visual Fatigue Questionnaire (Persian Version were used for data gathering. Hagner EC1 Luxmeter was used to measure the local lighting. Data were analyzed by SPSS 20 software, through descriptive statistics. Findings: The lighting in 382 stations (75.8% was improper and less than standard. The minimum and maximum intensity of light was between 22.4lux in station 2 (inventory department and 581lux in station 4 (systems and methods department. The overall intensity in more than 50% units, except the Systems and Methods Department, were less than the standard (300lux. 40.4% of the participants had severe eye fatigue, 28.6% had moderate visual fatigue, 28.6% had low visual fatigue and only 2.4% had no visual fatigue. The average of visual fatigue was 3.50±1.97. Conclusion: The workplace lighting and the eye fatigue of computer users in the Research and Development Department of the studied automotive industry are not in an acceptable condition.

  12. Industrial research enhancement program at the National Synchrotron Light Source

    International Nuclear Information System (INIS)

    Wang Jun; Nasta, Kathleen; Kao, Chi-Chang

    2011-01-01

    Industrial research has attracted more and more attention recently at synchrotron facilities. Bringing the state-of-the-art research capabilities provided by these facilities to the industrial user community will help this community to improve their products and processing methods, to foster competition and build the economy. The National Synchrotron Light Source (NSLS) has a long and celebrated history in research partnerships with industry since its inception more than 25 years ago, and both industry and the facility have benefited tremendously from these partnerships. Over the years, the ways in which industrial research is conducted at synchrotron facilities have evolved significantly, and a new paradigm of collaboration between industry and facilities is clearly needed to address this changing situation. In this presentation, the discussion will focus on an enhancement plan recently implemented at the NSLS to address industrial users' concerns and needs. The goal of NSLS Industrial Program Enhancement plan is to encourage greater use of synchrotron tools by industry researchers, improve access to NSLS beamlines by industrial researchers and facilitate research collaborations between industrial researchers and NSLS staff as well as researchers from university and government laboratories. Examples of recent developments in these areas will be presented.

  13. New Zealand’s Drug Development Industry

    Directory of Open Access Journals (Sweden)

    Christopher Carswell

    2013-09-01

    Full Text Available The pharmaceutical industry’s profitability depends on identifying and successfully developing new drug candidates while trying to contain the increasing costs of drug development. It is actively searching for new sources of innovative compounds and for mechanisms to reduce the enormous costs of developing new drug candidates. There is an opportunity for academia to further develop as a source of drug discovery. The rising levels of industry outsourcing also provide prospects for organisations that can reduce the costs of drug development. We explored the potential returns to New Zealand (NZ from its drug discovery expertise by assuming a drug development candidate is out-licensed without clinical data and has anticipated peak global sales of $350 million. We also estimated the revenue from NZ’s clinical research industry based on a standard per participant payment to study sites and the number of industry-sponsored clinical trials approved each year. Our analyses found that NZ’s clinical research industry has generated increasing foreign revenue and appropriate policy support could ensure that this continues to grow. In addition the probability-based revenue from the out-licensing of a drug development candidate could be important for NZ if provided with appropriate policy and financial support.

  14. Design research and industrial applicability

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    1997-01-01

    Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry.......Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry....

  15. Analyzing the development of Indonesia shrimp industry

    Science.gov (United States)

    Wati, L. A.

    2018-04-01

    This research aimed to analyze the development of shrimp industry in Indonesia. Porter’s Diamond Theory was used for analysis. The Porter’s Diamond theory is one of framework for industry analysis and business strategy development. The Porter’s Diamond theory has five forces that determine the competitive intensity in an industry, namely (1) the threat of substitute products, (2) the threat of competition, (3) the threat of new entrants, (4) bargaining power of suppliers, and (5) bargaining power of consumers. The development of Indonesian shrimp industry pretty good, explained by Porter Diamond Theory analysis. Analysis of Porter Diamond Theory through four main components namely factor conditions; demand condition; related and supporting industries; and firm strategy, structure and rivalry coupled with a two-component supporting (regulatory the government and the factor of chance). Based on the result of this research show that two-component supporting (regulatory the government and the factor of chance) have positive. Related and supporting industries have negative, firm and structure strategy have negative, rivalry has positive, factor condition have positive (except science and technology resources).

  16. Assessment of industry needs for oil shale research and development. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hackworth, J.H.

    1987-05-01

    Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry`s view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R&D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

  17. Developing Research Skills for Undergraduate Business Students: Experiential Learning on Introduction to Personnel Administration and Industrial Relations Course

    Science.gov (United States)

    Figueroa, Carmen I.; González, Cándida

    2014-01-01

    This paper reports on research into developing research skills in human resources management of apprentices through experiential learning. The target groups were undergraduate business students registered in the Introduction to Personnel and Industrial Relations course. The research identified the appreciation level of importance and satisfaction…

  18. Recomendations concerning technical research and development with the purpose to industrially exploit marine algae

    Energy Technology Data Exchange (ETDEWEB)

    Hahn-Haegerdal, B.

    1980-10-01

    This report formulates a proposal for a program for technical research and development concerning use of Marine algae.The report is based on a retrospective literature search, an inquiry to potential algae users and producers in Sweden, visits to and correspondence with scientists and industries in Sweden and abroad. Technical research and development concerning marine algae is needed within the following fields: -Development of new sorts of algae offering resistance to parasite and disease adoptation to cultivation and har- vesting systems,and high-yielding concerning technically interesting components. -Development of suitable cultivation systems for Swedish conditions. -Co-cultivation of fish, mussels, oysters and crustaceans with algae. -Development of harvesting systems. -Methane rotting. -Fatty acid/hydrocarbon production as an alternative to methane rotting. -Physical-chemical properties of marine polysaccharides in relation to their technical properties. -Marine algae as fodder supplement.

  19. The Research on International Development Path of China’s Marine Biopharmaceutical Industry

    Directory of Open Access Journals (Sweden)

    Xiu-Mei Fu

    2018-02-01

    Full Text Available Under the backdrop of the Maritime Silk Road Initiative, the study on the international development of China’s marine biopharmaceutical industry based on factor allocation is of great practical significance for industrial sustainability and building the industry into a leading international player in the global market. In this paper, we first identify the leading factors that influence the development of the marine biopharmaceutical industry, namely, resources, technologies, talents, investments and policies. Furthermore, the hierarchical structure model of these factors was established and analyzed using the analytic hierarchy process (AHP. The importance ranking of these constraints was identified, as follows: technologies > talents > resources > policies > investments. Then, based on the theory of comparative advantage and game theory, we analyzed the necessity of China’s marine biopharmaceutical industry going global, that is, international cooperation may lay a solid foundation for the win-win outcome of this industry in countries along the Maritime Silk Road. According to the status quo of China’s marine biopharmaceutical industry, based on these findings, an international factor–allocation cooperation path was designed, and the path chart of the international development of the marine biopharmaceutical industry was drawn. Finally, methods for the development of China’s marine biopharmaceutical industry were proposed, which covers efforts to protect marine resources, promote R&D for core technologies, establish a strong talent pool, encourage more investments, provide policy support and promote worldwide cooperation. It is the first report to investigate the path of the sustainable exploitation of the marine biopharmaceutical industry from the perspective of factor allocation amidst the backdrop of the Maritime Silk Road Initiative.

  20. Quantitative phase analysis in industrial research

    International Nuclear Information System (INIS)

    Ahmad Monshi

    1996-01-01

    X-Ray Diffraction (XRD) is the only technique able to identify phase and all the other analytical techniques give information about the elements. Quantitative phase analysis of minerals and industrial products is logically the next step after a qualitative examination and is of great importance in industrial research. Since the application of XRD in industry, early in this century, workers were trying to develop quantitative XRD methods. In this paper some of the important methods are briefly discussed and partly compared. These methods are Internal Standard, Known Additions, Double Dilution, External Standard, Direct Comparison, Diffraction Absorption and Ratio of Slopes

  1. Therapeutic Ultrasound Research And Development From An Industrial And Commercial Perspective

    International Nuclear Information System (INIS)

    Seip, Ralf

    2009-01-01

    The objective of this paper is to share the challenges and opportunities as viewed from an industrial and commercial perspective that one encounters when performing therapeutic ultrasound research, development, manufacturing, and sales activities. Research in therapeutic ultrasound has become an active field in the last decade, spurred by technological advances in the areas of transducer materials, control electronics, treatment monitoring techniques, an ever increasing number of clinical applications, and private and governmental funding opportunities. The development of devices and methods utilizing therapeutic ultrasound to cure or manage disease is being pursued by startup companies and large established companies alike, driven by the promise of profiting at many levels from this new and disruptive technology. Widespread penetration within the clinical community remains elusive, with current approaches focusing on very specific applications and niche markets. Challenges include difficulties in securing capital to develop the technology and undertake costly clinical trials, a regulatory landscape that varies from country to country, resistance from established practitioners, and difficulties in assembling a team with the right mix of technological savvy and business expertise. Success is possible and increasing, however, as evidenced by several companies, initiatives, and products with measurable benefits to the patient, clinician, and companies alike.

  2. Therapeutic Ultrasound Research And Development From An Industrial And Commercial Perspective

    Science.gov (United States)

    Seip, Ralf

    2009-04-01

    The objective of this paper is to share the challenges and opportunities as viewed from an industrial and commercial perspective that one encounters when performing therapeutic ultrasound research, development, manufacturing, and sales activities. Research in therapeutic ultrasound has become an active field in the last decade, spurred by technological advances in the areas of transducer materials, control electronics, treatment monitoring techniques, an ever increasing number of clinical applications, and private and governmental funding opportunities. The development of devices and methods utilizing therapeutic ultrasound to cure or manage disease is being pursued by startup companies and large established companies alike, driven by the promise of profiting at many levels from this new and disruptive technology. Widespread penetration within the clinical community remains elusive, with current approaches focusing on very specific applications and niche markets. Challenges include difficulties in securing capital to develop the technology and undertake costly clinical trials, a regulatory landscape that varies from country to country, resistance from established practitioners, and difficulties in assembling a team with the right mix of technological savvy and business expertise. Success is possible and increasing, however, as evidenced by several companies, initiatives, and products with measurable benefits to the patient, clinician, and companies alike.

  3. A national laboratory/private industry cooperative research and development agreement (CRADA)

    International Nuclear Information System (INIS)

    Pritchard, D.A.

    1996-01-01

    This paper provides an overview of the history and process of establishing a cooperative research and development agreement (CRADA) between Sandia National Laboratories and Magnavox Electronic Systems Company for the design, development, and testing of a 360-degree scanning, imaging, intrusion detection sensor. The subject of the CRADA is the Advanced Exterior Sensor (AES). It is intended for exterior use at ranges from 50 to 1,500 meters and uses a combination of three sensing technologies (infrared, visible, and radar) and a new data processing method to provide low false-alarm intrusion detection and tracking combined with immediate visual assessment. The establishment of this CRADA represents a new paradigm in the cooperation between the Department of Defense, the Department of Energy, the National Laboratories and Private Industry. Although a formal document has now been executed, a CRADA is, nonetheless, primarily an agreement to work with each other to achieve goals that might otherwise be unattainable. For the DoD, a program continues in the face of uncertain funding. For the DOE, a CRADA is in place that meets congressionally mandated guidelines. For Sandia, sponsors are in agreement on requirements and synergistic funding. And for Magnavox, an opportunity is in hand to work with researchers in developing advanced security technology

  4. MANAGING THE DEVELOPMENT OF AGRO-INDUSTRIAL CLUSTERS

    Directory of Open Access Journals (Sweden)

    D. V. Zavyalov

    2018-01-01

    Full Text Available Purpose: the purpose of the research is to design a concept of management system for agro-industrial clusters as self-organizing systems. The transition to a new technological way was marked not only by breakthrough solutions in the organization of production of goods, works and services, but also by the emergence of new (in some cases unique forms of inter-firm cooperation and interaction of economic agents in the real and financial sector of the economy. The concept of "digital economy" becomes the most important in economic research, and moreover - from a practical point of view, modern digitalization technologies in managing the activities of economic entities form new information and communication platforms for economic and scientific exchange. The penetration of digital technologies into life is one of the characteristic features of the future world. Not an exception is the agro-industrial sector, which is both strategically important for ensuring food security and has a high export potential. The article presents the concept of managing the development of agro-industrial clusters as self-organizing systems capable of integrating the activities of small and medium-sized businesses into the value-added chain based on modern information technologies. The obligatory and providing tools, mechanisms for implementing the concept, aimed at eliminating existing problems on the way of forming agro-industrial clusters, are disclosed.Methods: the agro-industrial cluster management model is developed using the methods of economic analysis and synthesis, and functional modelling.Results: conceptual model of cluster development management is presented to be used for the nascent clusters and the development of existing agro-industrial clusters.Conclusions and Relevance: as a result of the conducted research the reasons interfering development of cluster approach in the agroindustrial sector of economy are defined. Among them the main are: lack of

  5. WAMAS: an event to develop synergies between research and industry

    CERN Multimedia

    Rosaria Marraffino

    2013-01-01

    On 19-20 November, CERN hosted the first Workshop on Advanced Materials and Surfaces (WAMAS) in the framework of EIROforum, a network of Europe’s largest inter-governmental research organisations.     “The intent of the workshop was to promote the importance of materials and surfaces technology in the research programmes of European organisations,” explains Enrico Chesta, CERN’s Technology Transfer Section Leader and chairman of the EIROforum Working Group on Innovation Management. “Events like WAMAS help support the involvement of industry with scientific institutions because they facilitate the translation of the available expertise into commercial applications.” The event was organised with the support of EuCARD-2 and Enterprise Europe Network (EEN) through the Rhône-Alpes Chamber of Commerce and Industry. “More than 160 participants came together at the workshop; there was a good balance between ind...

  6. Empirical Research on Ecological Development Level of Resource-based Industries-Base on the data of the Silk Road Economic Belt Core Zone

    Science.gov (United States)

    Wang, Lei; Yan, Min

    2017-11-01

    Industrial ecology is the epitome of sustainable development in industry level, is one effective gateway to realizing green transformation. On the basis of industrial ecology development, including resource efficiency and environmental efficiency of ecological evaluation index system, this paper evaluates the level of industrial ecology development of resource-based industries in Xinjiang using entropy method. Research shows that the overall ecological development level of resource-based industries has remained at continuous improved trend with slow improvement in resource efficiency, and relative faster improvement in environmental efficiency. With economic development entering into the period of new normal at the end of the “twelfth five year plan”, the resource efficiency of ecological development of resource-based industries demonstrated a downward trend. The overall level of industrial ecology also faced with certain fluctuations, various ecological development level of resource-based industries also presented a downward trend. To promote ecological development of resource-based industries in Xinjiang, countermeasures and suggestions are initiated.

  7. Research on Risks and Forecasting Countermeasures of Hainan Banana Industry

    OpenAIRE

    Liu, Yan-qun; Zeng, Xiao-hong; Fang, Jia

    2011-01-01

    Based on the overviews of the current conditions of Hainan banana industry, the research makes an analysis of the risks faced by Hainan banana industry. They are respectively marketing risks, natural risks, information risks and production risks. In order to promote a sustainable and rapid development of Hainan banana industry, Countermeasures are proposed in the research. The first is to strengthen the leading organization of forecasting mechanisms on banana industry. The second is to establ...

  8. Regional competitiveness and territorial industrial development in Serbia

    Directory of Open Access Journals (Sweden)

    Zeković Slavka

    2009-01-01

    Full Text Available In the paper are investigated the regional competitiveness and the territorial aspects of industry in Serbia. There are analyzed the key recent movement in industrial development of Serbia and macrolocational factors and territorial organization of industry. The research of possible structural changes of industry and identification of its key development sectors is the important component of territorial development analysis in Serbia. This paper points to the kinds and types of industrial zones and industrial parks as fundamental models of regional and urban development of that activity with critical retrospection on the industrial zones in Serbia (greenfield and brownfield industrial locations. There are shown results of evaluation the regional competitiveness from a stand-point of possibilities of industrial development on the regional level (NUTS 3 by comparative analyses and Spider method. Results are used as one of the bases for making preliminary draft of territorial development scenario of this activity in Serbia and for the possible alocation of the future industrial zones and industrial parks in region level.

  9. Research and development

    Energy Technology Data Exchange (ETDEWEB)

    Harlow, Jr, J G

    1977-09-01

    The need for increased research and development programs to provide technological advances to meet future energy demands, particularly electric power demands, is discussed. It is concluded that the future energy needs of the world can only be supplied through technological improvements. The cost of these technological improvements can be minimized by cooperative, unified research and development programs. The financial support of the energy industry, the equipment manufacturing industry and the consumer will be required to finance these vital developments. The energy problems of the world can be solved by an adequately financed unified R and D effort. The U.S. must assume a major role of leadership in this world-wide effort. (LCL)

  10. How Researchers Use Social Media to Promote their Research and Network with Industry

    Directory of Open Access Journals (Sweden)

    Päivi Jaring

    2017-08-01

    Full Text Available Social media is now an essential information and interaction channel. Companies advertise and sell their products and services through social media, but this channel has not been so commonly applied to the task of selling knowledge and research work. This article studies the use of social media by researchers to promote their research and network with product developers in industry, and it presents a model of the use of social media by researchers. The data for this research was obtained by interviewing individual researchers of a research organization and surveying product developers from industry. The findings show that social media is seen as a good source of new information and contacts, and it is suitable for promoting awareness of research services and results. The results show that the speed and intensity of social media present challenges for researchers, but by being active in posting content and participating in discussions, researchers can derive benefits and enhance their personal reputations.

  11. Problem continuity in discontinuity of development of Serbian industry

    Directory of Open Access Journals (Sweden)

    Šljukić Marica

    2017-01-01

    Full Text Available In this paper the author uses a comparative analysis in order to show the discontinuity in the process of the industrial development of the Serbian society, as well as to point out the fact that the almost same problems have not been mastered throughout the whole process of industrialization. Besides the historical data, the data of the empirical research are used. The goal of the empirical research was to determine the real and the possible degree and intensity of the influence of the structural social changes to the organizing of industrial work. The research had been done from 2011 to 2013 using the multiple case study method, and it included six organizations from different sectors of industry. By comparison of different phases of the industrial development in Serbia the author concludes the continuity of the following problems: accumulation of capital, technical and technological underdevelopment and dependence, raw materials dependence, and the deficit of the competent work force (especially managers. The biggest and the basic problem, which encompasses all four problems mentioned above, has been the absence of the strategy of the industrial development throughout the whole process of this development.

  12. Managing between science and industrie: An historical analysis of the Philips Research and Development Department's management

    NARCIS (Netherlands)

    Boersma, F.K.

    2007-01-01

    Purpose This paper seeks to deal with the history of Research and Development (R&D) management. It takes the history of the R&D Department of the Royal Philips Electronics of The Netherlands as an example to unravel the dynamics behind industrial R&D management. Designomethodologyoapproach This

  13. Research and development of basic technologies for the next generation industries, 'recombinant DNA utilizing technology'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'kumikae DNA riyo gijutsu'. Kenkyu kaihatsu hyoka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    Research, development and evaluation were performed with an objective of establishing the basic technology related to the recombinant DNA utilizing technology to create new microorganisms for processes in the chemical industry. The major achievements of the present research and development include establishment of the P450 gene manifestation system attributed from microsomes and mitochondria, and the success of the world's first simultaneous manifestation of P450 and reduction enzyme. Furthermore, the fused enzyme combining P450 and the reduction enzyme genetically was successfully manufactured ahead of the other countries, opening the way to industrializing the recombinant enzymes for use in bio-processes in the chemical industry. In creating a high-efficiency secretion recombinant bacillus subtilis stock, a bacillus subtilis host whose protease activity has been noticeably decreased was created. As an achievement of the research on the 'basic recombinant DNA technology', high-efficiency manifestation vector of medium level thermophile was created, and its usefulness was demonstrated. In addition, a host and vector system for high level thermophile was developed for the first time in the world. These achievements have opened the way to industrial utilization of the thermophilic bacteria. (NEDO)

  14. University-Industry Research Collaboration: A Model to Assess University Capability

    Science.gov (United States)

    Abramo, Giovanni; D'Angelo, Ciriaco Andrea; Di Costa, Flavia

    2011-01-01

    Scholars and policy makers recognize that collaboration between industry and the public research institutions is a necessity for innovation and national economic development. This work presents an econometric model which expresses the university capability for collaboration with industry as a function of size, location and research quality. The…

  15. Research report for fiscal 1998. Researches on the history and inheritance of industrial technologies (Researches of domestic industrial technologies that greatly contributed to the development of industry); 1998 nendo chosa hokokusho. Sangyo gijutsu rekishi keisho chosa (sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosa hen)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    As the contribution increases of Japan's industrial technologies to the development of scientific and economic activities in Japan and abroad, it is of paramount importance to clarify the significance as seen from the historical point of view and to utilize the achievement for the development of Japan's industrial technologies in the future. Researches are conducted into some processes of Japanese origin now enjoying high evaluation as global achievements are reviewed, which involve the separation and purification of butadiene, production of concentrated nitric acid, disproportionation of toluene, polymerization of vinyl chloride in a large reactor, development and practical application of lithium ion secondary batteries, and the enzymatic production of the D-amino acid. As examples of development of chemical technologies, furthermore, researches are undertaken into the ammonia synthesizing technology, production of resorcinol, and coal liquefaction. Also reviewed are data on the history of industries accommodated in museums, and numerous articles of scientific literature written in the period of Shogunate-end through Meiji-beginning to constitute the foundation on which Japan's scientific technologies would make rapid progress. The result gives suggestions for opening a new way toward creative and unique technologies. (NEDO)

  16. Research and development and management of technology

    International Nuclear Information System (INIS)

    Kim, Yeong Gil

    1989-04-01

    This book mentions current state of affairs on research and development and prospect : activity of business, field like information and materials, energy and resource, public welfare, general industry technology. It introduces policy on promotion of research and development such as propel of special research and development business, propel strategy for 10 priority tasks, reinforcement of basic research, promotion of information industry and propel for technical development of business.

  17. Economic corridor of industrial development in Indonesia

    Science.gov (United States)

    Berawi, M. A.; Miraj, P.; Sidqi, H.

    2017-12-01

    Indonesia as an archipelago country categorize its regional development into six corridors from Sumatra, Java, Kalimantan, Sulawesi, Bali-Nusa Tenggara and Papua-Maluku. Currently, industrial development becomes one of the highest contributing factors to the national economic growth. However, each region in the nation experience inequality of development mainly related to the infrastructure sector. Thus, the research aims to develop a sustainable economic corridor by considering the characteristics and its potential. The research uses a qualitative approach through a desk study, benchmarking and in-depth interview. Location Quotient is used for the method of the analysis tool. The results show each characteristic of every corridor in the country. Sumatera as national plantation and processing industry corridor, Java as cyber technology innovation and services center, Kalimantan as national energy reserves and processing, Sulawesi as national aquaculture and processing industry, Bali - Nusa Tenggara as national eco-tourism center, and Papua - Maluku as national ore mining and processing.

  18. Trends in Food Research and Development: A Survey of the Commercial Food Industry

    Science.gov (United States)

    1987-09-01

    top priority of research and development in the food industry; however, the consumer market has chanqed dramatically since the beginning of this decade...Canned & Preserved Fruits & Vegetables 45.6 204 Grain Mill Products 32.4 205 Bakery Products 33.8 206 Sugar & Confectionery Products 32.4 207 Fats & Oils...15.6 40.6 39.1 Aseptic Packaging of Particulates 0.0 0.0 14.5 36.0 49.5 Genetic Engineering 1.5 7.6 21.2 36.4 33.3 The market share of frozen foods is

  19. From research to industry - the establishment of a radiation processing industry in South Africa

    International Nuclear Information System (INIS)

    Du Plessis, T.A.; Stevens, R.C.B.

    1983-01-01

    In the late sixties the South African Atomic Energy Board in pursuing its objectives to promote the peaceful application of nuclear energy in general, established a research group with the specific purpose of investigating and developing radiation processing as a new technique. During the early years it was realised that the economic and technological facets of establishing a new industry were equally important and, in addition to fundamental research, strong emphasis was placed on the necessity of marketing this new technology. Although the initial emphasis was put on gamma sterilization, and today still forms the backbone of the radiation processing industry, the promising fields of polymer modification and food irradiation hold a lot of promise in the radiation processing industry. Following ten years of successfully introducing and providing a radiation service, the South African Atomic Energy Board in 1980 decided to transfer its service to the private sector. These developments in South Africa are a good sample of how a small country, through initial government involvement, can acquire a sophisticated new private industry. (author)

  20. Research and industrial application of x-ray photoelectron spectroscopy (XPS) in Malaysia

    International Nuclear Information System (INIS)

    Mohd Ambar Yarmo; Abd Razak Daud; Abdul Kariem Arof

    2000-01-01

    As a developing country, Malaysia is fully committed to research and development especially for industrial development. One of priority fields is advanced materials and surface analysis of such materials is an important aspect in research. Among the tools for surface science analysis is x-ray photoelectron spectroscopy (XPS) which can be considered new to this country. The industrial sector is also keen to solve their problems and developing their products using XPS. The microelectronic and electrical industries are interested in solving problems related to metal-metal joining , gold silica peeling, surface corrosion and surface coating. The glove industry uses XPS to solve problems due to staining and color fading of their products. Research conducted in universities and research institutes that mainly deal with catalysis, membranes for fuel cells, sensors, batteries, corrosion phenomena and interface interaction in coating finds XPS a useful technique for surface studies. Specific examples from various sectors will be presented in this paper. (Author)

  1. CREATIV: Research-based innovation for industry energy efficiency

    International Nuclear Information System (INIS)

    Tangen, Grethe; Hemmingsen, Anne Karin T.; Neksa, Petter

    2011-01-01

    Improved energy efficiency is imperative to minimise the greenhouse gas emissions and to ensure future energy security. It is also a key to continued profitability in energy consuming industry. The project CREATIV is a research initiative for industry energy efficiency focusing on utilisation of surplus heat and efficient heating and cooling. In CREATIV, international research groups work together with key vendors of energy efficiency equipment and an industry consortium including the areas metallurgy, pulp and paper, food and fishery, and commercial refrigeration supermarkets. The ambition of CREATIV is to bring forward technology and solutions enabling Norway to reduce both energy consumption and greenhouse gas emissions by 25% within 2020. The main research topics are electricity production from low temperature heat sources in supercritical CO 2 cycles, energy efficient end-user technology for heating and cooling based on natural working fluids and system optimisation, and efficient utilisation of low temperature heat by developing new sorption systems and compact compressor-expander units. A defined innovation strategy in the project will ensure exploitation of research results and promote implementation in industry processes. CREATIV will contribute to the recruitment of competent personnel to industry and academia by educating PhD and post doc candidates and several MSc students. The paper presents the CREATIV project, discusses its scientific achievements so far, and outlines how the project results can contribute to reducing industry energy consumption. - Highlights: → New technology for improved energy efficiency relevant across several industries. → Surplus heat exploitation and efficient heating and cooling are important means. → Focus on power production from low temperature heat and heat pumping technologies. → Education and competence building are given priority. → The project consortium includes 20 international industry companies and

  2. Tobacco industry consumer research on socially acceptable cigarettes.

    Science.gov (United States)

    Ling, P M; Glantz, S A

    2005-10-01

    To describe tobacco industry consumer research to inform the development of more "socially acceptable" cigarette products since the 1970s. Analysis of previously secret tobacco industry documents. 28 projects to develop more socially acceptable cigarettes were identified from Philip Morris, RJ Reynolds, British American Tobacco, and Lorillard tobacco companies. Consumer research and concept testing consistently demonstrated that many smokers feel strong social pressure not to smoke, and this pressure increased with exposure to smoking restrictions. Tobacco companies attempted to develop more socially acceptable cigarettes with less visible sidestream smoke or less odour. When presented in theory, these product concepts were very attractive to important segments of the smoking population. However, almost every product developed was unacceptable in actual product tests or test markets. Smokers reported the complete elimination of secondhand smoke was necessary to satisfy non-smokers. Smokers have also been generally unwilling to sacrifice their own smoking satisfaction for the benefit of others. Many smokers prefer smoke-free environments to cigarettes that produce less secondhand smoke. Concerns about secondhand smoke and clean indoor air policies have a powerful effect on the social acceptability of smoking. Historically, the tobacco industry has been unable to counter these effects by developing more socially acceptable cigarettes. These data suggest that educating smokers about the health dangers of secondhand smoke and promoting clean indoor air policies has been difficult for the tobacco industry to counter with new products, and that every effort should be made to pursue these strategies.

  3. An agenda for research on the relationships between industrial design and performance

    NARCIS (Netherlands)

    Candi, M.; Gemser, G.

    2010-01-01

    This article proposes a research agenda for studying the relationships between industrial design and performance in the context of new product/service development. A review of existing research on relationships between industrial design and performance is used as a basis for identifying research

  4. CSIR research, development and innovation initiatives for the medical device and diagnostic industry

    CSIR Research Space (South Africa)

    Vilakazi, Busisiwe

    2017-10-01

    Full Text Available This presentation is focused on development and innovation initiatives in the medical device and diagnostic industry. It is presented by Dr Busisiwe Vilakasi at The 6th CSIR Conference: Ideas that work for industrial development, 5-6 October 2017...

  5. Continuing Professional Development Build on Industry-Academia Partnerships

    DEFF Research Database (Denmark)

    Fink, Flemming K.

    2007-01-01

    A challenge for university - industry partnerships is to combine productive engineering and academic learning, to combine industrial engineering tasks with their tasks in Continuing Professional Development (CPD). The rather new methodology Facilitated Work Based Learning (FWBL) can be defined...... as a CPD method based on a partnership between the university and the enterprise with the purpose of transferring research based knowledge thus making it an integral part of the daily business. Scientific staff from the university is facilitating a research based learning process and competence development...

  6. Achievement report on commissioned research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a voluminous cell incubation technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Saibo tairyo baiyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    Achievements were compiled on the research and development in fiscal 1981 on the 'voluminous cell incubation technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. In the research of a method for producing industrial materials using cells originated from lymph-based trunk cells, researches were performed on selection and breeding of cells, development of serum-free media, and establishment of the optimal culture method with regard to the method for producing industrial materials using stocks producing virus induced interferon. Regarding the method for producing industrial materials using idio-interferon producing mutable stocks, research and development was made on selection and breeding of superior cell stocks and serum-free media. With regard to the method for producing industrial materials using marrow originated cells, such researches were carried out as technological investigations, collection of cells, establishment of the proliferating condition for myeloid leukemia cells, discussions on the assay method for differentiation inducing factors, and search for cells producing useful substances. Other activities include research of the method for producing industrial materials using cells originated from epithelium cells, information exchange on voluminous cell incubation technologies, and investigations on literatures and patents. (NEDO)

  7. Achievement report on commissioned research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a voluminous cell incubation technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Saibo tairyo baiyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    Achievements were compiled on the research and development in fiscal 1981 on the 'voluminous cell incubation technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. In the research of a method for producing industrial materials using cells originated from lymph-based trunk cells, researches were performed on selection and breeding of cells, development of serum-free media, and establishment of the optimal culture method with regard to the method for producing industrial materials using stocks producing virus induced interferon. Regarding the method for producing industrial materials using idio-interferon producing mutable stocks, research and development was made on selection and breeding of superior cell stocks and serum-free media. With regard to the method for producing industrial materials using marrow originated cells, such researches were carried out as technological investigations, collection of cells, establishment of the proliferating condition for myeloid leukemia cells, discussions on the assay method for differentiation inducing factors, and search for cells producing useful substances. Other activities include research of the method for producing industrial materials using cells originated from epithelium cells, information exchange on voluminous cell incubation technologies, and investigations on literatures and patents. (NEDO)

  8. Determination of effective university-industry joint research for photovoltaic technology transfer (UIJRPTT) in Thailand

    International Nuclear Information System (INIS)

    Sugandhavanija, Pornpimol; Sukchai, Sukruedee; Ketjoy, Nipon; Klongboonjit, Sakol

    2011-01-01

    Most of the literatures related to university-industry (U-I) and technology transfer assume that the collaboration particularly the U-I joint research is beneficial to both university and industry which as a result underpins the sustainable development of economics and living standards of developed and developing countries. The U-I joint research for photovoltaic technology transfer in a developing country like Thailand should have been increased considering the fact that (i) the government implemented various strategies to support the renewable energy research and market development, (ii) the university aimed to be ''research-based university and (iii) the Thai photovoltaic industry struggle for competitiveness and survival in the global market. However, evidence revealed that the university and industry conducted little number of U-I joint projects. In this paper, we investigate the factors influencing the effective U-I joint research for photovoltaic technology transfer (UIJRPTT). In an attempt to better understand the influence of the factors, the path model with factors related to characteristics and perspectives of the university and the industry as well as joint research mechanism and their linkages to higher growth and improved economic and quality performance of the U-I joint research is developed and validated. The developed model empirically explains interaction between the factors and the outcome factors and can assist the government, the university and the industry to devise target strategies to improve the growth and performance of UIJRPTT. (author)

  9. Bioenergy industries development in China. Dilemma and solution

    International Nuclear Information System (INIS)

    Peidong, Zhang; Yanli, Yang; Xutong, Yang; Yonghong, Zheng; Lisheng, Wang; Yongsheng, Tian; Yongkai, Zhang

    2009-01-01

    Having 2.8 x 10 8 -3.0 x 10 8 t/a of wood energy, 4.0 x 10 6 t/a of oil seeds, 7.7 x 10 8 t/a of crops straw, 3.97 x 10 9 t/a of poultry and livestock manure, 1.48 x 10 8 t/a of municipal waste, and 4.37 x 10 10 t/a of organic wastewater, China is in possession of good resource condition for the development of bioenergy industries. Until the end of 2007, China has popularized 2.65 x 10 7 rural household biogas, established 8318 large and middle-scale biogas projects, and produced 1.08 x 10 10 m 3 /a of biogas; the production of bioethanol, biodiesel, biomass briquettes fuel and biomass power generation reached to 1.5 x 10 6 t/a, 3.0 x 10 5 t/a, 6.0 x 10 4 t/a and 6.42 x 10 9 kWh, respectively. In recent years, bioenergy industries developed increasingly fast in China. However, the industrial base was weak with some dilemma existing in raw material supply, technological capability, industry standards, policy and regulation, and follow-up services, etc. From the viewpoint of long-term effective development system for bioenergy industries in China, a series of policy suggestions have been offered, such as strengthening strategy research, improving bioenergy industries development policies and plan, enhancing scientific research input, persisting in technology innovation, establishing product quality standard, improving industrial standard system, opening market and accelerating commercialization, etc. It is expected that the advices mentioned above could be helpful for the improvement of bioenergy industries development. (author)

  10. Canberra semiconductor, an industrial partner for physics research

    International Nuclear Information System (INIS)

    Verplancke, J.; Burger, P.; Schoenmaekers, W.

    1990-01-01

    Canberra semiconductor produces germanium and silicon solid state detectors for nuclear radiation. Its business domain covers the production of standard detectors on an industrial basis, for industrial and applied physics applications, as well as the development of special detectors and electronics, tailored to the needs of a particular application, in science and research. There exists an important and beneficial interaction between these two activities. (orig.)

  11. Development and applications of high energy industrial computed tomography in China

    International Nuclear Information System (INIS)

    Xiao, YongShun; Chen, Zhiqiang

    2016-01-01

    In recent years, China's rapid development of high-end equipment manufacturing industry in the high-speed railway, aircraft, carrier rocket, etc. brings the growing requirements of the high quality assurance of the product. The accelerator based high-energy X-ray Industrial CT has the advantages of strong penetrating power, high sensitivity defect detection and quantitative measurement with image visualization, can meet the needs of the large complicated structure inspection demands. This paper introduces the current research and development status of high energy industrial CT system in China. Research achievements by the Tsinghua University and the Granpect company are discussed, including the ICT system design, high-power LINAC accelerator X-ray source and high detection efficiency detector development, fast and accurate reconstruction algorithms research, etc. This paper also introduces the particularized NDT applications from dozens of industrial CT systems made by Granpect in China, including welding structure nondestructive testing, assembly quality inspection, reverse engineering, scientific research and other applications. Then the future development and application of high energy industrial CT is prospected.

  12. Sustainable Development of Geothermal Industry in China: An Overview

    Directory of Open Access Journals (Sweden)

    Xu Bang

    2016-01-01

    Full Text Available With a wide distribution, large reserves, low cost, sustainable energy use and environmental protection and other unparalleled advantages, geothermal energy resources is important for China’s energy structure adjustment, energy conservation and environment improvement. Currently, geothermal utilization in China is still in its infancy, and Sustainable Development of the geothermal industry is also having a lot of problems. In this paper, the current research on sustainable development of geothermal industry focuses on two aspects: 1. the current situation of geothermal industry development and existing problems, 2. the current situation of sustainable development of the geothermal industry. On the basis of the review, some suggestions for further study on the sustainable development of geothermal industry are put forward.

  13. INNOVATIVE AND INDUSTRIAL-PERFORMANCE IN PHARMACEUTICAL RESEARCH-AND-DEVELOPMENT, A MANAGEMENT CONTROL PERSPECTIVE

    NARCIS (Netherlands)

    OMTA, SWF; BOUTER, LM; VANENGELEN, JML

    In this paper management control is related to innovative and industrial performance in 14 non-biotech pharmaceutical companies. The study consisted of questionnaires, sent to the heads of the different research departments of European research laboratories of leading pharmaceutical companies,

  14. Sustainable Construction Industry Development and Green Buildings: A Case of Latvia

    Science.gov (United States)

    Kauskale, L.; Geipele, I.; Zeltins, N.; Vanags, J.

    2018-02-01

    Nowadays, more and more attention is being paid to the country's economy, construction industry and real estate market's sustainable development and to the studies related to these issues. The aim of the research is to analyse significant aspects of sustainable development of construction activities and real estate market, with particular focus on environmental aspects of construction or the role of green buildings. The research includes an integrated approach of construction industry analysis and analysis of real estate operations area. Scientific and practical solutions and recommendations will enable the industry participants to be introduced to the main sustainable aspects of construction industry development, which, in their turn, can improve the overall performance of the industry in the long term.

  15. Industry sponsorship and research outcome

    DEFF Research Database (Denmark)

    Lundh, Andreas; Lexchin, Joel; Mintzes, Barbara

    2017-01-01

    BACKGROUND: Clinical research affecting how doctors practice medicine is increasingly sponsored by companies that make drugs and medical devices. Previous systematic reviews have found that pharmaceutical-industry sponsored studies are more often favorable to the sponsor's product compared...... on the association between sponsorship and research outcome. OBJECTIVES: To investigate whether industry sponsored drug and device studies have more favorable outcomes and differ in risk of bias, compared with studies having other sources of sponsorship. SEARCH METHODS: In this update we searched MEDLINE (2010......, systematic reviews and meta-analyses that quantitatively compared primary research studies of drugs or medical devices sponsored by industry with studies with other sources of sponsorship. We had no language restrictions. DATA COLLECTION AND ANALYSIS: Two assessors screened abstracts and identified...

  16. Progress of the research and development on the geological disposal technology of HLW with aid of the industry/university collaboration system and fixed term researcher system

    International Nuclear Information System (INIS)

    Yamada, Fumitaka; Sonobe, Hitoshi; Igarashi, Hiroshi

    2008-02-01

    In Japan Atomic Energy Agency (JAEA), various systems associated with the collaboration with industries and universities on the Nuclear Fuel Cycle and the Postdoctoral Fellow system, etc. are enacted. These systems have been operated considering the needs of JAEA's program, industry and academia, resultantly contributed, for example, to basic research and the project development. The activities under these collaboration systems contain personal exchanges, the publication of the accomplishments and utilization of those, in research and development concerning geological disposal technology of high-level radioactive waste (HLW). These activities have progressed in Power Reactor and Nuclear Fuel Development Corporation (PNC) and Japan Nuclear Cycle Development Institute (JNC), which are the successive predecessors of JAEA, through JAEA. The accomplishments from these systems have been not only published as papers in journals and individual technical reports but also integrated into the project reports, accordingly contributed to the advancement of the national program on the geological disposal of HLW. In this report, the progress of the research and development under these systems was investigated from the beginning of the operation of the systems. The contribution to the research and development on geological disposal technology of HLW was also studied. On the basis of these studies, the future utilization of the systems of the collaboration was also discussed from the view point of the management of research and development program. A CD-ROM is attached as an appendix. (J.P.N.)

  17. Industry's demand for the BESSY synchrotron radiation (SR): approaches towards interlinking basic scientific research activities and industry

    International Nuclear Information System (INIS)

    Bierhals, R.; Schmoch, U.; Nick, D.; Pilorget, L.; Ritschel, C.; Walter, G.H.

    1994-08-01

    In Germany, industry's demand for synchrotron radiation (SR) is very limited, due to the current macroeconomic situation and the corporate strategy of potential SR users in industry. This is in contrast to the conditions in the USA (and Japan), where industrial enterprises more readily invest in and run their own long-term basic research projects for exploration of potential commercial applications according to their demands, with research goals pursued there and in Germany overlapping to a large extent. It cannot be expected that demand for SR from industry in Germany will ever come up to the level seen in the USA. In Germany, non-university research institutes are most likely to become an important group of potential users of SR. Substantially boosting the demand for SR from industry will need a change of macroeconomic framework conditions affecting the corporate strategy to the effect that industry will more strongly commit itself to and take up responsibility for application-oriented fundamental research and the corresponding technology transfer. This can be achieved by a policy providing both for institutional means and financial incentives. As to near-market, strategic technological developments, establishment of structures allowing direct cooperation of science and technology, for instance in the form of joint ventures, or underwriting agreements and corresponding supervisory boards, seem to be promising. As to basic-research-oriented promotion of research, a technology screening might lead to the selection of technology-relevant research goals, and corresponding financial support from a special fund. Such incentives for cooperative action by technology, science and the government will create novel types of research-industry interfaces in Germany between ''historical'' spheres of autonomy of research of industry and the scientific community. (orig.) [de

  18. Situation and role of industrial fields in nuclear fusion reactor development

    International Nuclear Information System (INIS)

    Suzuki, Gen-ichi

    1983-01-01

    Japan Atomic Industrial Forum (JAIF) established the nuclear fusion technical committee in October, 1980, and has investigated the attitude of industrial fields in progressing nuclear fusion research and development and the measures to cooperate with national development plans. Corresponding to the new long term plan and the establishment of the basic policy for nuclear fusion research and development by Atomic Energy Commission of Japan in June, 1982, JAIF has settled the policy on the situation and role of industrial fields. In this report, first the necessity of firmly grasping the position of nuclear fusion research in atomic energy development is described, next, the present status of the research and development in Japan is reported, and it is mentioned that the role of manufacturers in reinforcing engineering has become more important in industrial fields. In the stage of the construction of a nuclear fusion reactor, the experiences in the engineering safety in fission reactors, environmental safety and system engineering will be utilized. Japanese industrial fields feature that they have made larger cooperation with national projects even in the research and development stage as compared to foreign countries. When the plan of next phase system will be promoted in the future, the cooperating methods in the past should be evaluated, investigated and improved, and the experiences in fast breeder reactors and advanced heavy water reactors should be referred to. Finally, the problems and the countermeasures in nuclear fusion development are described. (Wakatsuki, Y.)

  19. CAREER DEVELOPMENT OF TEXTILE INDUSTRY EMPLOYEES

    Directory of Open Access Journals (Sweden)

    UROŠEVIĆ Snežana

    2017-05-01

    Full Text Available Textile industry is a very important industrial branch because it produces clothes for nearly seven billion people and textile materials for technical usage. It employs a huge number of competitive and qualified, mostly female work force. It is also technologically and technically challenging. Thus, it is vital to employ qualified and well trained employees with certain competences, knowledge and skills in order to respond to rapid technological and market changes. Here, we will consider the influence of the career development on doing business in the textile industry while acquiring the competitive advantage. Career development is a lifelong process and it is includes knowledge management. The term career has several meanings while nowadays it can mean advancement. The career usually reflects the professional development path of an individual during his or her working career. The career is that concept which connects and unifies most strongly and explicitly individual and organizational interests and needs. The theoretical part explains terms such as career development, importance and improvement of employees for an organization, the possibility for career development within the textile industry. The second part of the paper deals with research conducted among the employees of the textile sector in Leskovac, the town in Serbia with a long-lasting textile tradition.

  20. Utility of radiotracer methodology in scientific research of industrial relevancy

    International Nuclear Information System (INIS)

    Kolar, Z.I.

    1990-01-01

    Utilization of radiotracer methodology in industrial research provides substantial scientific rather than directly demonstrable economic benefits. These benefits include better understanding of industrial processes and subsequently the development of new ones. Examples are given of the use of radiotracers in technological studies and the significance of the obtained results is put down. Creative application of radiotracer methodology may contribute to the economic development and technological advancement of all countries including the developing ones. (orig.) [de

  1. Orthopaedic research and education foundation and industry.

    Science.gov (United States)

    Wurth, Gene R; Sherr, Judy H; Coffman, Thomas M

    2003-07-01

    Members of orthopaedic industry commit a significant amount of funds each year to support research and education programs that are directly related to their product(s). In addition, industry supports organizations such as the Orthopaedic Research and Education Foundation. The relationship between the Orthopaedic Research and Education Foundation and industry began in the early 1980s. The support to the Orthopaedic Research and Education Foundation from industry primarily has come in the form of unrestricted grants. These grants best can be looked at as an investment rather than a contribution. This form of giving, once called corporate philanthropy is more accurately referred to as strategic philanthropy. Members of industry make these investments to enhance their reputations, build brand awareness, market their products and services, improve employee morale, increase customer loyalty, and establish strategic alliances. The specialty of orthopaedics is among the leaders in medicine in the amount of funding raised within the specialty for research and education programs. This is because of the amount of support from members of industry and the surgeons. During the past 15 years, 40% of the annual support to the Orthopaedic Research and Education Foundation has come from industry and the balance has come from surgeons and members of lay public. Future industry support of the Orthopaedic Research and Education Foundation and other organizations within the specialty of orthopaedics will be dependent on the continued demonstration of tangible returns in areas described.

  2. Sustainable Construction Industry Development and Green Buildings: A Case of Latvia

    Directory of Open Access Journals (Sweden)

    Kauskale L.

    2018-02-01

    Full Text Available Nowadays, more and more attention is being paid to the country's economy, construction industry and real estate market's sustainable development and to the studies related to these issues. The aim of the research is to analyse significant aspects of sustainable development of construction activities and real estate market, with particular focus on environmental aspects of construction or the role of green buildings. The research includes an integrated approach of construction industry analysis and analysis of real estate operations area. Scientific and practical solutions and recommendations will enable the industry participants to be introduced to the main sustainable aspects of construction industry development, which, in their turn, can improve the overall performance of the industry in the long term.

  3. Creative Industries: Development Processes Under Contemporary Conditions of Globalization

    Directory of Open Access Journals (Sweden)

    Valerija Kontrimienė

    2017-06-01

    Full Text Available The article deals with the processes of developing creative industries under conditions of a growth in the worldwide economy and globalization, discloses the role of the sector of creative industries and shows its place in the system of the modern global economy. The paper presents a comparative analysis of theories and theoretical approaches intended for the sector of creative industries and its development as well as defines regularities and specificities characteristic of the development of creative industries. Particular attention is shifted on the growth and development of creative industries considering the current challenges of globalization and on the most important specificities of the developing sector in the context of the challenges of economic globalization. The paper examines the trends reflecting the place of the sector of creative industries in the economy of the modern world, including the tendencies indicating changes in the export of the products created in this sector. The article considers the issues of developing creative industries and reveals priorities of future research.

  4. Industry-university collaboration for research and education

    International Nuclear Information System (INIS)

    Shalaby, B.A.; Snell, V.G.; Rouben, B.

    2015-01-01

    University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

  5. Innovative industry alignment at RMIT to develop skills for uranium industries

    International Nuclear Information System (INIS)

    Bhargava, S.K.

    2010-01-01

    'Full text:' RMIT University has recently introduced new teaching and research training programs on uranium processing technology at both undergraduate and postgraduate level. These programs have been implemented to improve young scientists and engineers' awareness of Australia's uranium processing industry, and to help provide future employees with improved background knowledge to the industry. The teaching program involves joint course development and lectures delivered by the leading scientists from ANSTO (Dr Suzanne Burling and Dr Chris Griffith) and Rio Tinto (Dr Stephen Grocott). This lecture series, which is offered to final year applied science and chemical engineering students, covers a range of topics and issues related to uranium processing including uranium mining, methods for chracterising uranium ores, extraction of uranium, the nuclear fuel cycle, waste and safety. The research training program involves honours and PhD students undertaking research projects on uranium mineralogy and uranium extraction. Research students are also provided with extensive training on how to conduct research safely using radioactive materials. The research programs are undertaken in RMIT's new EPA approved, low level radiation laboratory which has been dedicated to research projects on uranium processing. An extended overview of both of these new programs will be presented. This program is unique in Australia and is designed to address the issue of skill shortage in the ever growing Uranium industry world wide. International collaborators in this program will be most welcomed. (author)

  6. Sustainable urban development and industrial pollution

    Directory of Open Access Journals (Sweden)

    Petrović Julka

    2016-01-01

    Full Text Available Sustainable development of cities is highly connected with the pollution generated from industrial facilities and power plants. Both affect quality of air, weather, health and quality of life. The main goal of this paper is to determine the impact of selected weather parameters on the pollution from mentioned plants. From the research results, it can be concluded that sustainable urban development and welfare of citizens are dependent on causal relationship between pollution and weather. The greatest level of impact was recorded for nitric dioxide. In the case of carbon monoxide, the level of impact is the middle. The lowest level was recorded for particulate matter. The biggest impact on the carbon monoxide emission and particulate matter is that of air pressure, whereas temperature has the biggest impact on nitrogen dioxide emission. The research shows that air humidity and wind speed do not have a significant impact on the emission of pollutants from the plants. Research shows need for further studies in the field of impact of pollution from industry on urban weather and human health.

  7. A new context for the nuclear research and industry

    International Nuclear Information System (INIS)

    2000-01-01

    Pascal Colombani, general administrator of the CEA, develops in this presentation the situation of the nuclear industry to introduce the new orientations of the CEA group. The energy context, the deregulation impacts, the energy dependence and the greenhouse effect project are discussed before the presentation of the research programs and the necessary reorganizing of the nuclear industry. (A.L.B.)

  8. ANALYSIS OF DEVELOPING BATIK INDUSTRY CLUSTER IN BAKARAN VILLAGE CENTRAL JAVA PROVINCE

    Directory of Open Access Journals (Sweden)

    Hermanto Hermanto

    2017-06-01

    Full Text Available SMEs grow in a cluster in a certain geographical area. The entrepreneurs grow and thrive through the business cluster. Central Java Province has a lot of business clusters in improving the regional economy, one of which is batik industry cluster. Pati Regency is one of regencies / city in Central Java that has the lowest turnover. Batik industy cluster in Pati develops quite well, which can be seen from the increasing number of batik industry incorporated in the cluster. This research examines the strategy of developing the batik industry cluster in Pati Regency. The purpose of this research is to determine the proper strategy for developing the batik industry clusters in Pati. The method of research is quantitative. The analysis tool of this research is the Strengths, Weakness, Opportunity, Threats (SWOT analysis. The result of SWOT analysis in this research shows that the proper strategy for developing the batik industry cluster in Pati is optimizing the management of batik business cluster in Bakaran Village; the local government provides information of the facility of business capital loans; the utilization of labors from Bakaran Village while improving the quality of labors by training, and marketing the Bakaran batik to the broader markets while maintaining the quality of batik. Advice that can be given from this research is that the parties who have a role in batik industry cluster development in Bakaran Village, Pati Regency, such as the Local Government.

  9. Reports on research achievements in developing high-performance industrial furnaces in fiscal 1998 (Research and development of high-performance industrial furnaces). Volume 1; 1998 nendo koseino kogyoro nado ni kansuru kenkyu kaihatsu seika hokokusho. 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    From the reports on research achievements in developing high-performance industrial furnaces in fiscal 1998, the report volume 1 was prepared as a research achievement report of each working group, detailing fundamental researches, heating furnaces, and heat treatment furnaces. The fundamental researches have researched combustion evaluating technology, characteristics of the area in the vicinity of a combustor, characteristics of combustion of high-temperature air, heating characteristics of a furnace to investigate effect of local heat absorption, and combustion evaluation. For the heating furnaces, the following subjects were studied: development of an in-furnace combustion model, summary of an experiment for evaluating high-temperature air combustion, furnace height relative to combustion heat transfer characteristics, heat loss minimizing technology, combustion heat transfer characteristics of liquid fuels, optimal operation of the high-temperature air combustion, basic control in heating control, and steel piece heating control. Studies were performed for the heat treatment furnaces on the case of a direct firing furnace in evaluating the heat transfer characteristics, the case of a radiant tube furnace, application of thermal fluid simulation technology, furnace averaging technology, soot reducing technology, control technology, and trial design on a high-performance heat treatment furnace. (NEDO)

  10. [Thinking on development of Shanxi Astragali Radix industry].

    Science.gov (United States)

    Qin, Xue-Mei; Li, Ai-Ping; Li, Ke; Li, An-Ping; Ning, Lu-Hong

    2016-12-01

    Shanxi, a traditional production area to produce genuine Astragali Radix of high quality, has experienced major changes in the pattern of resources. This area once accounted for half of Astragali Radix industry, but now only serves as the largest supply area of traditional wild Astragali Radix. Furthermore, the strategic position of Shanxi Astragali Radix industry will become more prominent and more important to economic and social development in face of the diversity of market demands, especially for the strong demands of high-end Astragali Radix. In addition, Astragalus industry involves the simultaneous development of the first, second and tertiary industries in many areas, and it is typical and representative in the traditional Chinese medicine industry development. However, the application and industrial development of Shanxi Astragali Radix have been restricted due to the problems such as blind promotion of transplanting cultivation technology, and lack of science and technology including efficacy investigation, safety evaluation, standardization and controllability studies. Therefore, we would analyze the production history, resource structure, the current situation and progress of industry development, scientific research foundation and existing problem in this paper, and put forward countermeasures for development and technical innovation in order to make Astragali Radix industry bigger and stronger through innovation-driven and make benefits for demos. This thought provides a reference for the exploratory development of other large varieties of Chinese medicinal materials. Copyright© by the Chinese Pharmaceutical Association.

  11. [Development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry].

    Science.gov (United States)

    Xiao, Yong-Qing; Li, Li; Liu, Ying; Ma, Yin-Lian; Yu, Ding-Rong

    2016-01-01

    To elucidate the key issues in the development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry Chinese herbal pieces industry. According to the author's accumulated experience over years and demand of the development of the Chinese herbal pieces industry, the key issues in the development and innovation on the Chinese herbal pieces industry were summarized. According to the author, the traditional Chinese medicine processing discipline shall focus on a application basis research. The development of this discipline should be closely related to the development of Chinese herbal pieces. The traditional Chinese medicine processing discipline can be improved and its results can be transformed only if this discipline were correlated with the Chinese herbal pieces industry, matched with the development of the Chinese herbal pieces industry, and solved the problems in the development on the Chinese herbal pieces industry. The development of traditional Chinese medicine processing discipline and the Chinese herbal pieces industry also requires scientific researchers to make constant innovations, realize the specialty of the researches, and innovate based on inheritance. Copyright© by the Chinese Pharmaceutical Association.

  12. Research and development of basic technologies for the next generation industries, 'recombinant DNA utilizing technology'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'kumikae DNA riyo gijutsu'. Kenkyu kaihatsu hyoka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    Research, development and evaluation were performed with an objective of establishing the basic technology related to the recombinant DNA utilizing technology to create new microorganisms for processes in the chemical industry. The major achievements of the present research and development include establishment of the P450 gene manifestation system attributed from microsomes and mitochondria, and the success of the world's first simultaneous manifestation of P450 and reduction enzyme. Furthermore, the fused enzyme combining P450 and the reduction enzyme genetically was successfully manufactured ahead of the other countries, opening the way to industrializing the recombinant enzymes for use in bio-processes in the chemical industry. In creating a high-efficiency secretion recombinant bacillus subtilis stock, a bacillus subtilis host whose protease activity has been noticeably decreased was created. As an achievement of the research on the 'basic recombinant DNA technology', high-efficiency manifestation vector of medium level thermophile was created, and its usefulness was demonstrated. In addition, a host and vector system for high level thermophile was developed for the first time in the world. These achievements have opened the way to industrial utilization of the thermophilic bacteria. (NEDO)

  13. Research on industrial development of radiation sterilization in Sichuan

    International Nuclear Information System (INIS)

    Chen Xun; Zhu Rong; Chen Jigang; Ouyang Qiongli

    2010-01-01

    Radiation sterilization is widely applied in food processing, pharmaceutical manufacturing and medical instrumentation producing. As this industry offers service to related corporations, its development depends largely on the market scale of the relevant industries. This article mainly discusses the balance point between the capacity of radiation sterilization and the requirement of its market. There are less than 1% of the companies in Sichuan which using radiation sterilization for its products, broad prospects has shown in this field. There are 3 key points to make its output value reach 0.1% of the GDP in Sichuan: 1. Breaking the restrictions of capacity and inappropriate resources distribution. 2. Promoting the technique of radiation sterilization, guiding corporation to reduce their dependence on food additive from the perspective of food safety, make effective implantation of radiation sterilization into their manufacture processes. 3. Increasing publicity, eliminating scared mentality among customer on nuclear technology, helping manufacturing corporations to establish green environmental protection brand, directing our customer to a more healthy awareness. (authors)

  14. Necessity for Industry-Academic Economic Geology Collaborations for Energy Critical Minerals Research and Development

    Science.gov (United States)

    Hitzman, M.

    2012-12-01

    Economic geology is a highly interdisciplinary field utilizing a diverse set of petrologic, geochemical, geophysical, and tectonic data for improved scientific understanding of element migration and concentration in the crust (ore formation). A number of elements that were once laboratory curiosities now figure prominently in new energy technologies (e.g. wind turbines, solar energy collectors). If widely deployed, such technologies have the capacity to transform the way we produce, transmit, store, and conserve energy. To meet domestic and worldwide renewable energy needs these systems must be scaled from laboratory, to demonstration, to widespread deployment. Such technologies are materials intensive. If widely deployed, the elements required by these technologies will be needed in significant quantities and shortage of these "energy critical elements" could significantly inhibit the adoption of otherwise game changing energy technologies. It is imperative to better understand the geology, metallurgy, and mining engineering of critical mineral deposits if we are to sustainably develop these new technologies. There is currently no consensus among federal and state agencies, the national and international mining industry, the public, and the U.S. academic community regarding the importance of economic geology to secure sufficient energy critical elements to undertake large-scale renewable energy development. Available federal funding for critical elements focuses on downstream areas such as metallurgy, substitutions, and recycling rather than primary deposits. Undertaking the required research to discover and mine critical element deposits in an environmentally friendly manner will require significant partnering with industry due to the current lack of federal research support.

  15. Mass market development strategies of software industries: Case study based research

    Directory of Open Access Journals (Sweden)

    Varun Gupta

    2016-09-01

    Full Text Available The success in competitive mass market software development depends on the quality of software development and market segments targeted. Market segments are categorized by uncertainties contributed by “Newness” and “turbulences”, making the software success stochastic in nature. Selecting good market segments, delivering high quality software versions in the lowest time than competitors, result in increasing demand in markets and ultimately revenues. Enhanced customer base is beneficial for current product as well as for future products of industry in the form of increased reputation and increased involvement of customers in future development. The case study was conducted with 13 representatives drawing experiences of 14 mass market projects. Results indicate that software solutions are delivered to few investors or in highly competitive markets, as per the survey's findings of the marketing departments. The software organizations are reluctant to deliver relatively complex solutions in new markets unless and until strongly convinced with the probable success. The method for selection of market segments belonging to new and existing markets for undertaking the software delivery is also proposed in this paper. The model will help software industry decide the market segments and high abstract level features that could increase probability of software success. Poor selection of markets or targeting markets of “improper” size affects the market share of the industry to a great extend.

  16. The Design of Integrated Tapioca Agro-Industries Development Model

    Directory of Open Access Journals (Sweden)

    Azmi Alvian Gabriel

    2014-05-01

    Full Text Available Tapioca is an agro-industries product with high consumption level that reached 1.132 million tons per year. However, that potential was not balanced with the productivity levels of tapioca industries due to weak capacity and production period. This research aims to design the development model of tapioca agro-industries which can produce in a sustainable way in terms of quality as well as quantity of product. Study of research location was in the Kaur Regency of Bengkulu Province. This research consists of three stages. The first study was conducted to know the projection of the raw materials availability and product demand using regression and quadratic equation smallest method. The result of calculation projections showed the availability of raw cassava achieved an average of 10 million tons per year and the demand for tapioca 1.36 million tons per year. The second study was done to determine the partnership patterns between company and farmers using pairwise comparison and rating scale methods. From the results of the research note that "Inti-plasma" was the most efficient partnership patterns applied to tapioca agro-industries. The third study was conducted to determine the feasibility of the planned development model. The calculation result of feasibility analysis show the value of benefit cost ratio of 1.23; payback period amounted to 1 year 2 months; net present value of IDR 143,285,734,440.98; internal rate of return 43.55%; and the profitability index 3.56. Based on the overall feasibility criteria, then the model development of tapioca agro-industries can be said to deserve to be realized.   Keywords: agro-industries, financial analyses, factory design, partnership patterns

  17. Industry-university collaboration for research and education

    Energy Technology Data Exchange (ETDEWEB)

    Shalaby, B.A.; Snell, V.G.; Rouben, B. [Univ. Network of Excellence in Nuclear Energy (UNENE), Ontario (Canada)

    2015-09-15

    University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

  18. Industry-university collaboration for research and education

    Energy Technology Data Exchange (ETDEWEB)

    Shalaby, B.A.; Snell, V.G.; Rouben, B., E-mail: basma.shalaby@rogers.com [University Network of Excellence in Nuclear Energy, Hamilton, ON (Canada)

    2015-07-01

    University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

  19. Research and Exploration for Operational Research Education in Industry and Engineering Subject

    Science.gov (United States)

    Wu, Yu-hua; Wang, Feng-ming; Du, Gang

    2007-01-01

    On the basic of exploring the relationship of industry engineering and operational research technique, the thesis analyzes the location and utility of the operational research education in the whole industry engineering subject education. It brings forward the system design about operational research and relative class among industry engineering…

  20. Derivative Process Model of Development Power in Industry: Empirical Research and Forecast for Chinese Software Industry and US Economy

    OpenAIRE

    Feng Dai; Bao- hua Sun; Jie Sun

    2004-01-01

    Based on concept and theory of Development Power [1], this paper analyzes the transferability and the diffusibility of industrial development power, points out that the chaos is the extreme of DP releasing and order is the highest degree of DP accumulating, puts forward A-C strength, the index of adjusting and controlling strength, and sets up the derivative process model for industrial development power on the Partial Distribution [2]-[4]. By the derivative process model, a kind of time seri...

  1. Research activities of Samsung Heavy Industries in the conservation of the environment

    International Nuclear Information System (INIS)

    Han, B.; Kim, D.K.; Pikaev, A.K.

    1998-01-01

    Research activities for accelerator fields at Samsung Heavy Industries could be categorized into the accelerator development and its industrial applications. As the initial step of the efforts, high voltage industrial electron accelerators are developed, and development of synchrotron light source and other accelerators are also investigated. The research activities for the applications of accelerator include wastewater treatment, combustion flue gas purification, semiconductor treatment, and other radio-chemical processing. For wastewater treatment, an electron beam pilot plant for treating 1,000m 3 /day of wastewater from 60,000m 3 /day of total dyeing wastewater is under construction in Taegu Dyeing Industrial Complex. A commercial plant for re-circulation of wastewater from papermill company is also under construction in S-paper Co. in Cheongwon city, and after the successful installation, up to 80% of wastewater could be re-used in paper producing process

  2. Intervention development in occupational research: an example from the printing industry.

    Science.gov (United States)

    Brown, T P; Rushton, L; Williams, H C; English, J S C

    2006-04-01

    Intervention development research is an essential prerequisite of any study that attempts to determine whether specific interventions work to prevent work related injury and illness. Focus groups (n = 5) and direct observational studies (n = 21) of printers were used to elicit key issues that would aid the development of subsequent interventions. Transcripts from these were analysed by standard qualitative methods to identify common and related themes. The views of managers differed significantly from those of print workers in a number of areas, and working practices did not always follow policy. The majority of printers did not perceive dermatitis to be a major problem, although many complained of dry hands. Other key results included: the lack of skin care policy in most companies; poor understanding of the nature, causes, and treatment of dermatitis; low priority of dermatitis within health and safety concerns; little or no provision of occupational health services, particularly skin checks; variability in provision of and access to appropriate skin protection; and lack of accessible washing facilities. As a result it was decided to evaluate the implementation of four provision of (1) skin checks and treatment advice; (2) gloves of the correct type and size, and use of an after-work cream; (3) information on dermatitis within the printing industry; and (4) development of best practice skin care policy.

  3. Non clinical research at CENTIS supporting biotechnological and pharmaceutical industry

    International Nuclear Information System (INIS)

    Hernandez Gonzalez, Ignacio

    2012-01-01

    Drugs production is a highly demanding industry because the rigor of legislations and guidelines. Standards are applied to manufacturing facilities and also to research and development stage. Our national biotechnological industry is developing and producing important medications for diseases like cancer, some of them in the national and international market. Isotopes Centre is an institution supporting such development by means of a work platform to carry out researches in the field of pharmacokinetic and biodistribution in experimental models. Accumulated experience allows us to contribute to research and development of different kind of molecules as pharmaceuticals, specially the biotechnological ones. We are evolving in direction to new technologies and methodologies more suitable to current standards. Radiolabeling is still a convenient choice considering present and new imaging technologies to investigate distribution and kinetic in living subjects. With the techniques we have and the ones to incorporate in a near future, new and more demanding investigations will be affordable. (author)

  4. A Study of Factor Affecting the Software Application Development in Indonesian Creative Industry

    Directory of Open Access Journals (Sweden)

    Adhi Nugroho Chandra

    2015-06-01

    Full Text Available The creative industries promising opportunities, especially the interactive game business. creative industries is still undeveloped, but lately has been showing its contribution to the economic development of Indonesia. Implementation of the Information and Communication Technology (ICT strategy is a new discourse that can provide great opportunities for the entrepreneurial. This study aims to reveal the level of implementation of ICT strategies, the role of government influence on the development of business, industry conditions as well as the existing value chain in the interactive games industry. Type of research conducted by descriptive research, qualitative analysis was based on the findings of desk research / literature, interviewsources, and the researcher's own knowledge. Level of subjectivity can be minimized with the help of quantitative analysis and the selection of competent resource persons in the field interviews. Secondary dataobtained from the creative economy planning books in 2025, which was published by the Ministry of Commerce of the Republic of Indonesia. Based on the research results, it is concluded that the implementation of ICTstrategies by entrepreneurs in the interactive games industry is still less, and this is partly because in general the industry is still small-scale and micro enterprises, mash the industry is relatively new in the world of business,and entrepreneurs are still concentrating the creation, production, and distributio, commercialization are being developed. In general, interactive games industry is growing. In the future, need to research business model and business strategy, so it would complement the models developing strategy in the game interactive industry.

  5. Student involvement and research for the nuclear industry

    International Nuclear Information System (INIS)

    Ginniff, M.E.

    1980-01-01

    Nuclear engineering is one of the modern and rapidly advancing technologies. Those already involved in it are continually updating their knowledge to keep abreast of the developments. Of course the sound basic principles of engineering still apply but the scene of application can be transformed in a few years. In fact, because of this, many engineers from more traditional industries often express the view that presently the total range of nuclear engineering is research and development. How can students be trained for such a rapidly advancing technology. Is not the answer early involvement. Effective early involvement for students can only come about by the close co-operation and involvement of the staff of universities and industry. The theme is developed. (author)

  6. [Incentives and disincentives for research and development of new drugs by the pharmaceutical industry].

    Science.gov (United States)

    Curcio, Pasqualina Curcio

    2008-10-01

    The authors present a model with factors that influence research and development decisions by the pharmaceutical industry: risk of disease transmission and possibility of control; case-fatality and the presence of cure or treatments; income; number of persons who demand the medicine; and opportunity costs for the company. Companies tend to invest in markets with inelastic demand (highly contagious diseases with no possibility of controlling transmission and/or very lethal diseases without treatment) and/or where there is a large population or high per capita income. Companies tend not to invest in markets where marginal costs exceed marginal income, particularly when costs increase permanently as a consequence of rising opportunity costs generated by foregoing profit in other markets. In such cases, policies to subsidize R&D are not effective, and policies must be orientated towards strengthening basic and applied research by public institutions.

  7. Improving Industry-Relevant Nuclear-Knowledge Development through Special Partnerships

    International Nuclear Information System (INIS)

    Cilliers, A.

    2016-01-01

    Full text: South African Network for Nuclear Education Science and Technology (SAN NEST) has the objective to develop the nuclear education system in South Africa to a point where suitably qualified and experienced nuclear personnel employed by nuclear science and technology programmes in South Africa are predominantly produced by the South African education system. This is done to strengthen the nuclear science and technology education programmes to better meet future demands in terms of quality, capacity and relevance. To ensure sustainable relevance, it is important to develop special partnerships with industry. This paper describes unique partnerships that were developed with nuclear industry partners. The success of these partnerships has ensured more industry partners to embrace the model which has proven to develop relevant knowledge, support research and provide innovative solutions for industry. (author

  8. Labor development strategy in the bag industry

    Directory of Open Access Journals (Sweden)

    Dyah Maya Nihayah

    2016-04-01

    Full Text Available The research aims to formulate strategies for improving the labor competencies in the bag industry in Kudus Regency. The data comprise business players, which will be analyzed using the Strength, Weaknesses, Opportunities, and Threats (SWOT analysis. The results reveal that the proper strategy for improving employment in the bag industry is growth and build strategy. Growth and development strategy are intensive actions undertaken through the development of labor competencies to improve the quality of output. It can be made with creating learning resources by designing methods and trainings refer to the Competency Based Training (CBT.

  9. Between science and industry-applied yeast research.

    Science.gov (United States)

    Korhola, Matti

    2018-03-01

    I was fortunate to enter yeast research at the Alko Research Laboratories with a strong tradition in yeast biochemistry and physiology studies. At the same time in the 1980s there was a fundamental or paradigm change in molecular biology research with discoveries in DNA sequencing and other analytical and physical techniques for studying macromolecules and cells. Since that time biotechnological research has expanded the traditional fermentation industries to efficient production of industrial and other enzymes and specialty chemicals. Our efforts were directed towards improving the industrial production organisms: minerals enriched yeasts (Se, Cr, Zn) and high glutathione content yeast, baker´s, distiller´s, sour dough and wine yeasts, and the fungal Trichoderma reesei platform for enzyme production. I am grateful for the trust of my colleagues in several leadership positions at the Alko Research Laboratories, Yeast Industry Platform and at the international yeast community.

  10. Market structure, industrial organisation and technological development: the case of the Japanese electronics-based nc-machine tool industry.

    OpenAIRE

    Watanabe, S

    1983-01-01

    ILO pub-WEP pub. Working paper on the impact of market structure and business organization on technological change in the automatic control machine tool industry in Japan - based on a 1982 sample survey of 40 industrial enterprises, discusses research and development trends, demand, production, subcontracting, competition, etc.; investigates the impact of electronics Innovation on small scale industry, the international division of labour and on developing countries. Bibliography and graphs.

  11. The Implementation of Industrial Cluster Development Program in Padurenan Village, Kudus

    Directory of Open Access Journals (Sweden)

    R. Heffi Achid Muharrom

    2014-12-01

    Full Text Available Small medium enterprise (SME has a significant contribution to the national economic growth, and the Government has been trying to enhance the competitiveness of SME by using industrial cluster approach.This research tries to discuss the implementation of embroidery and apparel industrial cluster development program in Padurenan Village, Kudus Regency, also to analyze supporting and constraining factors that influence the implementation. The descriptive research method with qualitative approach is used in this research.The result shows that many activities conducted through a synergy among stakeholders have been implemented succesfully and proven to provide a positive impact for the developmet of embroidery and apparel SME in Padurenan. Enhancing the commitment and communication among actors involved in the program are needed for further development.Keywords:  Embroidery and apparel industry, industrial cluster, policy implementation

  12. Ties that bind: multiple relationships between clinical researchers and the pharmaceutical industry.

    Science.gov (United States)

    Henry, David; Doran, Evan; Kerridge, Ian; Hill, Suzanne; McNeill, Paul M; Day, Richard

    2005-11-28

    It is believed that pharmaceutical industry sponsorship of clinical research leads to the development of multiple ties between clinicians and the pharmaceutical industry. To quantify this relationship we conducted a survey of medical specialists listed in the Medical Directory of Australia in 2002 and 2003. A questionnaire was mailed that elicited information about all aspects of research relationships between clinicians and pharmaceutical companies. The odds of reporting multiple additional ties (financial and professional) with pharmaceutical companies by clinicians who had an active research relationship were compared with those who did not. All clinicians who returned a completed questionnaire about their research activities were included in the study. A questionnaire was mailed to 2120 medical specialists; 823 (39%) responded. Of these, 338 (41%) reported involvement in industry-sponsored research in the previous year. They were more likely than others to have been offered industry-sponsored items or activities valued at more than 500 AU dollars (>382 US dollars; odds ratio [OR], 3.5; 95% confidence interval [CI], 2.6-4.7) and support for attending international conferences (OR, 5.4; 95% CI, 3.9-7.4). The strongest associations were seen for acting as a paid consultant to industry (OR, 9.0; 95% CI, 3.9-20.4) and for membership on advisory boards (OR, 6.9; 95% CI, 5.1-9.6). There was a strong relationship between research collaboration and accumulation of industry ties. For 1 additional tie the OR was 2.2 (95% CI, 1.2-3.8) and rose to 6.3 (95% CI, 3.5-11.1) with 3 ties and 41.8 (95% CI, 14.5-143.4) with 6 or more ties. Medical specialists who have research relationships with the pharmaceutical industry are much more likely to have multiple additional ties than those who do not have research relationships. Institutional review should discourage clinical researchers from developing multiple ties.

  13. Sugar Industry and Coronary Heart Disease Research: A Historical Analysis of Internal Industry Documents.

    Science.gov (United States)

    Kearns, Cristin E; Schmidt, Laura A; Glantz, Stanton A

    2016-11-01

    Early warning signals of the coronary heart disease (CHD) risk of sugar (sucrose) emerged in the 1950s. We examined Sugar Research Foundation (SRF) internal documents, historical reports, and statements relevant to early debates about the dietary causes of CHD and assembled findings chronologically into a narrative case study. The SRF sponsored its first CHD research project in 1965, a literature review published in the New England Journal of Medicine, which singled out fat and cholesterol as the dietary causes of CHD and downplayed evidence that sucrose consumption was also a risk factor. The SRF set the review's objective, contributed articles for inclusion, and received drafts. The SRF's funding and role was not disclosed. Together with other recent analyses of sugar industry documents, our findings suggest the industry sponsored a research program in the 1960s and 1970s that successfully cast doubt about the hazards of sucrose while promoting fat as the dietary culprit in CHD. Policymaking committees should consider giving less weight to food industry-funded studies and include mechanistic and animal studies as well as studies appraising the effect of added sugars on multiple CHD biomarkers and disease development.

  14. Industrial Ecology and Regional Development: Eco-Industrial Development as Cluster Policy

    OpenAIRE

    Deutz, Pauline; Gibbs, David

    2008-01-01

    Abstract Aspects of industrial ecology fit closely with work in regional development investigating clustering, networking, and local economic development. However, there has been limited cross fertilisation between these bodies of literature. This paper uses an empirical focus on eco-industrial developments in the USA to postulate that IS can be viewed as a distinct cluster concept and to consider the implications of this for both IE and RD policies. (Deutz,...

  15. Current Situations and Countermeasures of Development of Kiwifruit Industry in Guizhou Province

    OpenAIRE

    Huang, Wei; Wan, Ming-chang; Yang, Sheng-jun; Zhang, Xue; Qiao, Rong

    2012-01-01

    On the basis of current development situations of planting, scientific research and processing of kiwifruit industry in Guizhou Province, the paper analyzes main factors restricting development of kiwifruit industry, including lack of unified planning, standardized planting specifications, and backward management of kiwifruit orchard. In accordance with current development situations and restricting factors, the paper presents some countermeasures for development of kiwifruit industry in Guiz...

  16. Global research and development budget

    Energy Technology Data Exchange (ETDEWEB)

    Norman, C

    1980-03-01

    The future political and economic relationships between industrial countries and between the industrial and developing countries will be influenced by the investments now being made for research and development (R and D). There is little public understanding of this $150 billion global investment, 25 percent of which is spent on military programs, 15 percent on basic research, and nearly 10 percent on space exploration, while the most-pressing world problems are receiving relatively little attention. A breakdown of geographic distribution of research and a comparison of government expenditures for different areas of R and D reveals a situation that could be corrected. National and corporate priorities need to be revised and political and institutional barriers must give way to new international and cooperative arrangements. 3 tables, 27 references. (DCK)

  17. RESEARCH ON INVESTMENT APPEAL AND COMPETITIVE CAPACITY OF INDUSTRIAL ENTERPRISES OF UKRAINE

    Directory of Open Access Journals (Sweden)

    Olena Khadzhynova

    2017-12-01

    Full Text Available The purpose of the research is an elaboration of theoretical, methodological, and methodical approaches to forming and developing competitive capacity and investment appeal of steel industry enterprises. The achievement of the given purpose has led to the necessity of formulating such scientific research concept, which bottom line is in the relevance of using modern management methods implemented in foreign manufacturing practices. These are innovative economic, technical, organizational, and corporate methods of managing enterprises with the help of developed systems of managing strategic changes in enterprise activities, the steel industry in particular, which will contribute to achieving the high level of effectiveness and competitiveness of domestic business units. The research methodology is based on the combination of theories of managing economic systems in the globalized market economy. The empirical base for the research consists of the works by domestic and foreign scientists on problems of formation and development of strategic change management systems at industrial enterprises, statistical records, companies’ public records in the Internet, data of international information agencies, Ukrainian legislation on regulating economic activity of enterprises. In carrying out the research, such methods were used as: general academic analysis and synthesis, systemic generalization, statistic and correlation analysis (when justifying the directions of development before carrying out the economic analysis of activities of metallurgical enterprises. There is a conclusion that the industry is concentrated and, consequently, long-term trends are quite predictable, but they require additional clarifications, taking into consideration the uncertainty in the modern state of world economy. It is determined that metallurgy development depends on GBP. The analysis shows that the countries with the high GDP level have quite developed metallurgy. One

  18. Strategy for developing of small medium industry to creative industry in special culinary, Sarolangun Regency

    Directory of Open Access Journals (Sweden)

    Fitriaty Fitriaty

    2018-03-01

    Full Text Available This study aims to obtain a description of small and medium industries in the area of regional culinary Sarolangun, internal and external factors and formulate strategies to develop the industry to become a creative industry. The method that is used SWOT analysis,  descriptive and qualitative analysis. Based on the research result found that the culinary that can be developed is coconut bread, dodol, kipang cake and curry fish curry fish. The weakness of internal factors lies in working capital, human resources, and external factors lie in marketing and institutional. The recommended strategy is to turn around. Keywords: SME’s, Culinary, SWOT Analysis, Turn around

  19. Supporting developers in addressing maintenance aspects: an empirical study in the industrial equipment manufacturing industry

    NARCIS (Netherlands)

    Mulder, W.

    2016-01-01

    Addressing maintenance aspects has become increasingly important in development projects of industrial equipment. Developers of such equipment need to address the maintenance aspects in order to achieve competitive equipment and service offerings. This research focuses on the identification of the

  20. STUDY OF TRENDS AND PERSPECTIVES OF INDUSTRIAL ENGINEERING RESEARCH

    Directory of Open Access Journals (Sweden)

    H. Dastkhan

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Industrial engineering is an engineering discipline which, because of its multi-disciplinary nature, has played an important role in the development and optimization of different systems at macro and micro levels. In this paper, the results of a research to study the position and trend of Industrial Engineering research in recent years are described. The data from a sample of 7 114 IE-related articles from international journals during the last 27 years were used for the analysis. The results showed that the development of IE in many countries has a strong correlation with their industrial and economic development. However, IE research topics are spreading in other management and engineering departments and so there is a need to redefine the discipline and its specific areas of interest. According to the prediction made using time series analysis, the most favorite fields of IE research in future will be on subjects related to information technology, intelligent systems, optimization, quality, and supply chain management.

    AFRIKAANSE OPSOMMING: Bedryfsingenieurswese is 'n ingenieursdissipline wat vanweë die multi-dissiplinêre aard daarvan 'n belangrike rol gespeel het in die optimisering van verskillende sisteme op makroen mikrovlak. Hierdie artikel hou die resultate voor van 'n navorsingsprojek wat onderneem is om die posisie en rigting van Bedryfsingenieursnavorsing in onlangse jare te bepaal. Die data van 'n monster van 7 114 Bedryfsingenieursverwante artikels wat verskyn het in internasionale joernale oor die afgelope 27 jaar is gebruik vir die ontleding. Die resultate toon dat die groei van Bedryfsingenieurswese in verskeie lande sterk korreleer met industriële en ekonomiese ontwikkeling. Tog blyk dit dat die navorsingsonderwerpe van Bedryfsingenieurswese sprei na ander bestuurs- en ingenieursdepartemente en dus bestaan daar ‘n nodigheid om die dissipline en die spesifieke belangstellingsvelde te herdefinieer

  1. Avenues for research and technology development for industrial applications using electron beam facilities and their exploitation through BRNS schemes

    International Nuclear Information System (INIS)

    Markandeya, S.G.

    2013-01-01

    BARC has been responsible to establish indigenously designed state-of-the-art electron accelerator facilities at its Electron Beam Centre at Kharghar, Navi Mumbai. The centre offers two versatile machines namely, (i) 3 MeV, 30 kW Parallel Coupled Self Capacitance type Multiplier (Dynamitron) DC accelerator and (ii) 10 MeV, 10 kW RF Electron Linac. While these machines are being used by scientists and engineers from within DAE, there is tremendous scope for exploiting their use by researchers in the country for basic research as well as by technologists and entrepreneurs for exploiting its potential for industrial applications. However, due to lack of adequate information about the facilities and due to paucity of research funds for the academia in the country, there is always a gap which researchers seldom look forward to be filled up appropriately. The present talk will give a glimpse of some opportunities to exploit the facilities at EBC, Kharghar for variety of applications followed by a brief presentation on provisions under BRNS to carry out sponsored research activities for basic research as well as for technology development for the industrial applications. (author)

  2. THE DEVELOPMENT STRATEGIES OF CASHEW INDUSTRY IN KENDARI CITY, SOUTHEAST SULAWESI

    Directory of Open Access Journals (Sweden)

    Asriani Asriani

    2015-09-01

    Full Text Available The economic development of a region should refer to the agroindustry approach. An industry is not well developed due to the constraints of internal and external factors. This research aimed to identify the internal and external factors which could affect the development of cashew industry and determine the most effective alternative strategies applied in developing the cashew industry in Kendari Southeast Sulawesi Province. The data analysis technique used  Strength, Weakness, Opportuny and Threat (SWOT methods. The results showed that the internal factors that most influenced the development of the cashew industry were availability of adequate labor and limited capital investment funds while the external factors that influence the development included the government support and limited access to markets. The alternative strategies of the cashew industry development in Kendari Southeast Sulawesi Province  include improving the marketing, maintaining the product quality and increasing the working capital.Keyword: development, strategy, cashew industry, SWOT

  3. Research achievement report for fiscal 1998 on the development of high-performance industrial furnaces. Research and development of high-performance industrial furnaces and the like (2); 1998 nendo koseino kogyoro no kaihatsu ni kansuru kenkyu seika hokokusho. Koseino kogyoro nado ni kansuru kenkyu kaihatsu (2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Volume 2 named above contains part of research achievement reports and individual research achievement reports. The aluminum melting furnace working group research achievement report covers aluminum melting furnace operating patterns, concentrated impinging flame mode and dispersed impinging flame mode, and honeycomb and ball structures in heat storing bodies. The tubular heater working group report mentions the application of this facility to oil heating furnaces, studies and investigations for the embodiment of real systems using the tubular heater, and tests conducted in a furnace with plural heating tube lines. The individual research achievement reports elaborate on the development of technologies of heat transfer optimization under unsteady conditions in the steel material heating process, research and development of high-efficiency heat transfer technologies, development of heating furnace geometry optimization technologies, research and development of a high-performance controlled atmosphere heat treatment furnace, development of high-efficiency heat transfer technologies in high-temperature jet flame heating, development of heat uniformity improvement technologies for example for the steel material heating process, construction of optimum combustion control technologies for the regenerative burner furnace, research concerning laser-aided measurement in industrial furnaces, etc. (NEDO)

  4. University-Industry Collaboration in IS Research

    DEFF Research Database (Denmark)

    Schubert, Petra; Bjørn-Andersen, Niels

    2012-01-01

    of successful modes of collaboration. In this paper, we present the findings of the first qualitative in‐depth phase, in which we inter‐ viewed nine experienced researchers in order to understand the phenomenon of university‐ industry collaboration in the context of different research backgrounds. The findings...... from the preliminary interviews show that researchers have very differing individual preferences regarding the ideal setup of such collaborative research projects. They also show that design research and case study are the most common research methods in such projects. While peer‐ reviewed conference...... papers and journal articles are the most popular forms of academic output, reports and sessions with managers are the prevalent output for industry partners. This work is a precursor to a larger survey, which will allow us to study correlations between characteristics of researcher/project type...

  5. Development present situation analysis of nuclear power industry in China and South Korea

    International Nuclear Information System (INIS)

    Huang Gang

    2011-01-01

    This paper introduces the present state and primary development experiences of South Korean nuclear power industry and the present state of Chinese nuclear power industry development, and comparatively analyzes and researches the differences between China and South Korea in nuclear power industry. At last, we come up with some suggestions and ideas to refer the follow-up development of Chinese nuclear power industry. (author)

  6. Impacts of teachers’ competency on job performance in research universities with industry characteristics: Taking academic atmosphere as moderator

    Directory of Open Access Journals (Sweden)

    Anguo Xu

    2014-10-01

    Full Text Available Purpose: Research universities with industry characteristics play an irreplaceable role in national economic development and social development. With the rapid development of research universities with industry characteristics in China, these universities face new challenges in managing teachers and promoting their quality. This paper aims to examine the impact of teachers’ competency on job performance in research university with industry characteristics Design/methodology/approach: Based on the behavioral event interview and questionnaire methods, a four-dimension (i.e. basic quality, teaching ability, industry awareness and research capacity competency model was proposed, the influence mechanism of competency on job performance was examined using empirical research. Findings: We found that there is a significant positive correlation between the teachers’ competency level, four dimensions and job performance in research universities with industry characteristics, especially between research capacity, teaching ability, industry awareness and job performance. And academic atmosphere plays a regulatory role in the interaction between the competency and job performance. Practical implications: Our findings can help to improve the management level of teachers in research universities with industry characteristics.Originality/value: The paper introduces the competency theory to the teacher management in research universities with industry characteristics, and gives some interesting findings.

  7. Special number issued in commemoration of 10th anniversary of NEDO's industrial technology research and development department; NEDO sangyo gijutsu kenkyu kaihatsu bumon 10 shunenshi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    This special number is issued in commemoration of 10th anniversary of NEDO's industrial technology research and development department, to look back its R and D activity results and help the future projects. This department was established in 1988, based on the Law of Establishment of the Industrial Technology Research and Development System, and started its activities as the central institute for positively promoting the R and D of the industrial technologies, centered by the basic and advanced areas, while in closely cooperation with oversea institutes. During this period, the department has been pursuing various projects, including large-scale industrial technology R and D projects transferred from the Agency of Industrial Science and Technology; R and D projects for technologies for the industrial bases of the next generation and medical/welfare equipment technologies; projects for assistance to international cooperative research teams; projects for establishing facilities as research bases necessary for promoting R and D of advanced industrial technologies; and, more recently, projects for establishing measures to cope with global environmental problems. NEDO has been playing a role of managing and controlling various large-size R and D projects, both in name and reality, taking over the projects which had been promoted by the Agency of Industrial Science and Technology. This special number outlines the R and D projects NEDO has pursued in the past 10 years. (NEDO)

  8. Localisation for industrial development

    CSIR Research Space (South Africa)

    Bhugwandin, Ashley

    2017-10-01

    Full Text Available This presentation focuses on localisation for industrial development, and is presented by Ashley Bhugwandin at The 6th CSIR Conference: Ideas that work for industrial development, 5-6 October 2017, CSIR International Convention Centre, Pretoria...

  9. CONFERENCE CHEVREUL Nutrition research: the industrial approach

    Directory of Open Access Journals (Sweden)

    Korver Onno

    2000-01-01

    Full Text Available The goal of nutrition research in an industrial setting is the marketing of products. Since consumers cannot see from the product whether it is healthy, communication to the consumer about the nutritional and health values of the products is essential. Industrial nutrition research therefore has to provide the scientific dossier to underpin the claims and other communication on and around the product as well as the scientific basis for the communication. These two lines are illustrated in figure 1. For scientific audiences the steps to collect the scientific evidence are obvious: first screening for new ideas on the basis of scientific developments and business options, then identifying ingredients that can deliver the health benefit, followed by mechanistic and bioavailability studies and finally human intervention trials. The communication line is less obvious for most scientifically oriented audiences. Experience has shown that an information cascade has to be followed: during the execution of the research work close contact with academic experts (a true dialogue is essential, when the research data are available information of a wide selection of health professionals (e.g. physicians, dieticians, science journalists is taking place and only after this step communication to the consumer starts. The communication with the scientific experts (the first step of the cascade obviously has to be in the hands of the nutrition research group of the industry involved. In Unilever this is the Unilever Nutrition Centre based in Vlaardingen in the Netherlands. Their role in the scientific dialogue is outlined in figure 2. The fact that the “Medaille Chevreul” has been awarded twice to members of the Unilever Nutrition Centre in the last two decades, illustrates that the UNC is considered to be a group with a truly scientific tradition.

  10. Eco-industrial zones in the context of sustainability development of urban areas.

    Science.gov (United States)

    Sacirovic, Selim; Ketin, Sonja; Vignjevic, Nada

    2018-03-04

    Industry is one of the main activities in the city and in many cities of the world, and the dominant industrial zones are the most significant morphological forms of concentration of industrial facilities in the city and are concentrated industrial and business activity. Industrial parks combine activities related to energy and resource consumption, emissions, waste generation, economic benefits, and regional development. The focus of this work is the path of transformation between the present and the vision of a sustainable city in the future. The problem and the subject of research related to two related objects of research: the city and sustainable development. In this paper, the co-author's industrial symbiosis parks, modern tendencies of the spatial distribution of productive activities, circular economy, to attract leading corporations and open the way for new ventures while preserving the living environment in an urban area.

  11. Aeronautics Education, Research, and Industry Alliance (AERIAL) Year 2 Report and Year 3 Proposal

    Science.gov (United States)

    Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, Geroge; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; Tarry, Scott E.; Vlasek, Karisa D.

    2003-01-01

    The Aeronautics Education, Research, and Industry Alliance (AERIAL): a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, contributes to the strategic research and technology priorities of NASA while intensifying Nebraska s rapidly growing aeronautics research and development endeavors. AERIAL enables Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. This report contains a summary of AERIAL's activities and accomplishments during the second year of implementation. The AERIAL Year 3 proposal is also included.

  12. DEVELOPMENT OF THE STATE SUPPORT FORMS PROJECTS IN INDUSTRIAL BUILDING

    Directory of Open Access Journals (Sweden)

    I. M. Meilanov

    2016-01-01

    Full Text Available Aim. The topicality of the research is stipulated by the objective necessity of the organizational and economic mechanism improvement of the state support projects of the industrial building. The aim of the research is the development of conceptual provisions and methodological foundations of financial projects creating conditions for economic growth of Russia based on the construction and putting into effect industrial objects.Methods. In the course of the research the system, subject-functional and structural approaches were implemented to solve the problems set widening the scope of the complex approach to assessment of the current operating mechanism of the state financial support of the projects and financial volume; to criteria stipulation of the most effective projects contest selection: to the search of the investment resources accumulation instrument into industrial building.Results. It is stipulated that state investment policy in industrial building mechanism oriented to define rational investment volumes and their branch, reproductive, technological and territorial structure; option of the building branch development priority; increase of the investment projects efficiency realization. The dynamics of the state support in the form of subsidies and budget investments into creation of the industrial building objects is analytically summarized. It is determined that the peculiarity of the modern state support projects of industrial building is transition from budget allocations distribution between branches and regions to selective and partial financing of specific investment projects on competitive basis. Some tactics of state and private partnership attracting private capital without losing strategic state control under systems and objects are defined. As an effective form of the industrial building support projects it is proposed to use a concession model form: projecting - building- financing- ownership - exploitation

  13. Industry Research and Recommendations for New Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Hendron, B.; Leach, M.; Gregory, N.; Pless, S.; Selkowitz, S.; Matthew, P.

    2014-05-01

    Researchers evaluated industry needs and developed logic models to support possible future commercial new construction research and deployment efforts that could be led or supported by DOE's Commercial Building Integration program or other national initiatives. The authors believe that these recommendations support a proposed course of action from the current state of commercial building energy efficiency to a possible long-term goal of achieving significant market penetration of cost-effective NZE buildings in all building sectors and climates by 2030.

  14. The Impact of Foreign Ownership on Research and Development Intensity and Technology Acquisition in Indian Industries

    DEFF Research Database (Denmark)

    Aggarwal, Aradhna

    2018-01-01

    of the Center for Monitoring Indian Economy. Foreign ownership is categorized according to the level of control exercised by foreign firms as defined under the Companies Act of India. A comparative analysis of domestic and different categories of foreign firms was conducted for two time periods: (i) the global...... boom period of 2004–2008, and (ii) the post global financial crisis period of 2008–2014. A horizontal cluster analysis of 3-digit, industry-level data shows that foreign firms cluster in high-technology industries. The propensity score matching analysis, however, reveals that in a matched sample...... of foreign and domestic firms, majority-owned foreign firms spend less on research and development and more on technology transfers than their local counterparts, demonstrating that the level of equity holdings by a foreign firm matters. There is little evidence of the global financial crisis affecting...

  15. Energy efficient industrialized housing research program

    Energy Technology Data Exchange (ETDEWEB)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-12-01

    This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

  16. Industry evolution in developing countries : the Indonesian pulp and paper industry

    NARCIS (Netherlands)

    Dijk, van M.

    2003-01-01

    Almost all empirical research on industry evolution has been conducted on high or medium technology industries in industrialised countries. In this paper, a detailed analysis of the life cycle of Indonesia's pulp and paper industry is presented as case study to investigate industry evolution in

  17. OPPORTUNITIES OF DEVELOPING TOURISM INDUSTRY IN BANGLADESH

    Directory of Open Access Journals (Sweden)

    Tayub CHOWDHURY

    2009-12-01

    Full Text Available Tourism appeal includes natural places like beaches, eco-parks, lakes, valleys, rivers, islands etc., archeological sites, historic mosques and monuments, resorts, picnic spots, forest and wildlife. Bangladesh is a riverine country having attractive panoramic beauty. There are hills, valley, canals, lake, eco-park and mangrove forests, rivers, so many islands and the longest beach in the world. In this country, the scope of nature based tourism, resource based tourism, culture based tourism and eco-tourism is quite evident. Bangladesh is trying hard to develop its tourism industry. Therefore the whole situation deserves to be seen from right perspectives. Role of government is positive since the last twenty years both private and public organizations have come forwarded to attract the local and foreign tourists. The cracks of problem could not identify accurately because of the paucity number of researches and investigations in our country. Developed and organized tourism industry could change the economic condition and contribute a big share in the GDP of Bangladesh. This study will impede the opportunities of developing tourism industry in the light of existing resources.

  18. A Systematic Analysis of Functional Safety Certification Practices in Industrial Robot Software Development

    Directory of Open Access Journals (Sweden)

    Tong Xie

    2017-01-01

    Full Text Available For decades, industry robotics have delivered on the promise of speed, efficiency and productivity. The last several years have seen a sharp resurgence in the orders of industrial robots in China, and the areas addressed within industrial robotics has extended into safety-critical domains. However, safety standards have not yet been implemented widely in academia and engineering applications, particularly in robot software development. This paper presents a systematic analysis of functional safety certification practices in software development for the safety-critical software of industrial robots, to identify the safety certification practices used for the development of industrial robots in China and how these practices comply with the safety standard requirements. Reviewing from Chinese academic papers, our research shows that safety standards are barely used in software development of industrial robot. The majority of the papers propose various solutions to achieve safety, but only about two thirds of the papers refer to non-standardized approaches that mainly address the systematic level rather than the software development level. In addition, our research shows that with the development of artificial intelligent, an emerging field is still on the quest for standardized and suitable approaches to develop safety-critical software.

  19. Development of ion/proton beam equipment for industrial uses

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Byung Ho; Lee, J. H.; Cho, Y. S.; Joo, P. K.; Kang, S. S.; Song, W. S.; Kim, H. J.; Chang, G. H.; Bang, S. W

    1999-12-01

    KAERI has possessed design and fabrication technologies of various ion sources including Duoplasmatron and DuoPiGatron developed by R and D projects of the long-term nuclear technology development program. In order to industrialize ion beam equipments utilizing these ion sources, a technology transfer project for a technology transfer project for a domestic firm has been performed. Under this project, engineers of the firm have been trained through classroom lectures of ion beam principles and OJT, an ion/proton beam equipment (DEMO equipment) has been designed, assembled and commissioned jointly with the engineers. Quality of the ion sources has been quantified, and technologies for ion beam equipment construction, functional test and application research have been developed. The DEMO equipment, which consists of an ion source, power supplies, vacuum, cooling and target systems, has been fabricated and tested to secure stability and reliability for industrial uses. Various characteristic tests including high voltage insulation, beam extraction, beam current measuring, etc. have been performed. This DEMO can be utilized for ion sources development as well as ion beam process development for various industrial products. Engineers of the firm have been trained for the industrialization of ion beam equipment and joined in beam application technology development to create industrial needs of beam equipment. (author)

  20. Research on industrialization of electric vehicles with its demand forecast using exponential smoothing method

    Directory of Open Access Journals (Sweden)

    Zhanglin Peng

    2015-04-01

    Full Text Available Purpose: Electric vehicles industry has gotten a rapid development in the world, especially in the developed countries, but still has a gap among different countries or regions. The advanced industrialization experiences of the EVs in the developed countries will have a great helpful for the development of EVs industrialization in the developing countries. This paper seeks to research the industrialization path & prospect of American EVs by forecasting electric vehicles demand and its proportion to the whole car sales based on the historical 37 EVs monthly sales and Cars monthly sales spanning from Dec. 2010 to Dec. 2013, and find out the key measurements to help Chinese government and automobile enterprises to promote Chinese EVs industrialization. Design/methodology: Compared with Single Exponential Smoothing method and Double Exponential Smoothing method, Triple exponential smoothing method is improved and applied in this study. Findings: The research results show that:  American EVs industry will keep a sustained growth in the next 3 months.  Price of the EVs, price of fossil oil, number of charging station, EVs technology and the government market & taxation polices have a different influence to EVs sales. So EVs manufacturers and policy-makers can adjust or reformulate some technology tactics and market measurements according to the forecast results. China can learn from American EVs polices and measurements to develop Chinese EVs industry. Originality/value: The main contribution of this paper is to use the triple exponential smoothing method to forecast the electric vehicles demand and its proportion to the whole automobile sales, and analyze the industrial development of Chinese electric vehicles by American EVs industry.

  1. Positioning and Priorities of Growth Management in Construction Industrialization: Chinese Firm-Level Empirical Research

    Directory of Open Access Journals (Sweden)

    Jingxiao Zhang

    2017-06-01

    Full Text Available The purpose of this research is to quantitatively evaluate the growth phase, position, and priorities of the industrialization policy management of the construction industry at firm level. The goal is to integrate quantitative dynamics into the policy-making process for sustainable policy development in future China. This research proposes an integrated framework, including growth management model and industrial policy evaluation method, to identify the challenges of construction industrialization and policy management. The research applies the mixed system method, which includes entropy method and average score method, to analyze the growth stage and major impact indexes targeting 327 survey samples. The empirical results show that the proposed conceptual framework and policy evaluation method could effectively determine the growth position and directions of the construction industrialization. For verification purpose, the study uses the local industry data from Shaanxi Province, China. The calculation results substantiate that the construction industry is in the middle section of the third growth phase. The comparison of the results from statistical methods shows that the local construction industry still needs substantial effort in policy management to improve its sustainable industrialization level. As countermeasures, the policy priorities should concentrate on: (1 enhancing effective cooperation among universities, research institutions and enterprises; (2 improving actions towards technology transfer into productivity; and (3 encouraging market acceptance of construction industrialization. This research complements the existing literature of policy evaluation of construction industrialization. Moreover, it provides theoretical and operational steps on industry policy evaluation and growth management framework, with accurate and ample data analysis on firm-level survey. Researchers and policy makers can use this research for further

  2. Prospect of French industrial technology research and development under President Chirac`s political power; Shiraku seikenka ni okeru Futsu sangyo gijutsu kenkyu kaihatsu seisaku no mitoshi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    This paper describes a prospect of French industrial technology research and development under President Chirac`s political power. The research and development in France is characterized by the national leadership. It depends greatly on the system and organization as well as the economical factors. The policy concentrates on the reformation of development organization rather than the research and development itself. It is required to provide the cultural and social tradition and environment that can bring up people bearing it, the system that can supply the methods of research and development, and the force of technology and market development that can industrialize and commercialize its results. The national leadership in France basically relates to all of these three factors. The actors of framework for the financing and enforcement of research and development are illustrated in a scheme by dividing them into government and companies. The actors for the enforcement of research and development are also divided into governmental public organizations and companies. This paper also provides the defense development in the private companies having a large finance of research and development from the government. The finance of research and development for public welfare from the government is roughly divided into the large-scale projects with determined usage by the government, and the supports for proposals by the companies. 13 refs., 4 figs., 40 tabs.

  3. Theoretical-methodical Fundamentals of industrial marketing research

    OpenAIRE

    Butenko, N.

    2009-01-01

    The article proves the necessity to research theoretical and methodical fundamentals of industrial marketing and defines main key aspects of relationship management with the customers on industrial market.

  4. Research and development project plans for FY 1995; 1995 nendo kenkyu kaihatsu jigyo keikaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The present research and development project plans for FY 1995 administrated by NEDO consist of research and development of new energy, and research and development of industrial technology. Are illustrated further enhancement of new energy introduction promotion measures, new stage of international projects, promotion of new energy and new energy technology development, further enhancement of industrial and scientific technology research and development, integrated measures against global and urban environment problems, and budget of NEDO projects in FY 1995. The research and development of new energy includes coal conversion technology, solar energy technology, geothermal energy technology, energy conversion and storage technology, hydrogen, alcohol and biomass energy technology, geothermal energy resources, coal resources development, new energy promotion department activities, NEDO information center activities, and so on. On the other hand, the research and development of industrial technology includes research and development of industrial technology, and global environment technology. The research and development of industrial technology consists of superconductivity, new materials, biotechnology, electronics, information and communications, machinery and aerospace, natural resources, humanity, life and society, and various leading researches.

  5. On developing a prospecting tool for wind industry and policy decision support

    International Nuclear Information System (INIS)

    McKeown, Charles; Adelaja, Adesoji; Calnin, Benjamin

    2011-01-01

    This paper presents the rudiments of a Wind Prospecting Tool designed to inform private and public decision makers involved in wind industry development in reducing transaction costs associated with identifying areas of mutual focus within a state. The multiple layer decision support framework has proven to be valuable to industry, state government and local decision makers. Information on wind resources, land availability, potential land costs, potential NIMBYism concerns and economic development potential were integrated to develop a framework for decision support. The paper also highlights implications for decision support research and the role of higher education in providing anticipatory science to enhance private and public choices in economic development. - Research Highlights: →In this paper we explore the building and value of a wind industry location decision support tool. →We examine the development process from the industry perspective. →We discuss the creation of a decision support tool that was designed for industry, state policy makers and local decision makers. →We build a model framework for wind prospecting decision support. →Finally we discuss the impact on local and state decision making as a result of being informed by science based decision support.

  6. Scenario research: The food industry in 2010

    OpenAIRE

    Stacey, Julia; Sonne, Anne-Mette; Jensen, Birger Boutrup

    2001-01-01

    What kind of foods will the consumers choose to buy in 2010? Will they be buying organic foods, functional foods or go for the cheapest products? Nobody can predict the future. However, by using scenario techniques qualified indications on future developments can be put together. Researchers at MAPP and the Department of Manufacturing Engineering and Management, The Technical University of Denmark have constructed three scenarios about the Danish food industry in 2010. The aim has been to ide...

  7. [Health-related scientific and technological capabilities and university-industry research collaboration].

    Science.gov (United States)

    Britto, Jorge; Vargas, Marco Antônio; Gadelha, Carlos Augusto Grabois; Costa, Laís Silveira

    2012-12-01

    To examine recent developments in health-related scientific capabilities, the impact of lines of incentives on reducing regional scientific imbalances, and university-industry research collaboration in Brazil. Data were obtained from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (Brazilian National Council for Scientific and Technological Development) databases for the years 2000 to 2010. There were assessed indicators of resource mobilization, research network structuring, and knowledge transfer between science and industry initiatives. Based on the regional distribution map of health-related scientific and technological capabilities there were identified patterns of scientific capabilities and science-industry collaboration. There was relative spatial deconcentration of health research groups and more than 6% of them worked in six areas of knowledge areas: medicine, collective health, dentistry, veterinary medicine, ecology and physical education. Lines of incentives that were adopted from 2000 to 2009 contributed to reducing regional scientific imbalances and improving preexisting capabilities or, alternatively, encouraging spatial decentralization of these capabilities. Health-related scientific and technological capabilities remain highly spatially concentrated in Brazil and incentive policies have contributed to reduce to some extent these imbalances.

  8. Biocatalytic pre-treatment processes of cotton : Industrial application of academic research

    NARCIS (Netherlands)

    Bouwhuis, G.H. (Gerrit); Bouwhuis, G.H. (Gerrit); Brinks, G.J. (Ger); Brinks, G.J. (Ger); Warmoeskerken, van M.M.C.G. (Marijn); Warmoeskerken, van M.M.C.G. (Marijn)

    2011-01-01

    Much research effort is invested in developing enzymatic treatments of textiles by focusing on the performance of enzymes at the laboratory scale. Despite all of this work, upgrading these developments from the laboratory scale to an industrial scale has not been very successful.Nowadays,companies

  9. Developing e-learning solutions in the automotive industry

    Directory of Open Access Journals (Sweden)

    Razvan Virgil Bogdan

    2016-07-01

    Full Text Available In the rapid developing market of automotive industry, cutting-edge technologies are being introduced. One such example is the AUTOSAR standard. Companies are investing a large amount of finances for the training of their employees into the intricacies of such technologies. In order to face such an increase of the training costs, automotive corporation have started lately switching their approach to e-Learning systems. This paper presents an e-Learning approach developed in the automotive industry in order to address the demands of teaching AUTOSAR standard. The developed e-Learning project is called Academy. In order to develop the e-Learning solution we focused on the Software Development part of automotive industry. Therefore we had to gather the ideas from different trainers, come with a common approach and use specific techniques so that the trainee should get a real feeling of the material. It is presented the design, implementation and evaluation of this e-Learning solution, but more than that faced issues and learned lessons. Developing this solution has offered different insights into how to approach such a task which are useful for the further expansion of the project, but also for future researchers who might encounter such a challenge of developing e-Learning solutions for the automotive industry. These are all grouped in a set of guidelines related to following a model of implementation, getting track of participants, user interaction with the AUTOSAR standard, test and production development and so on.

  10. Research and Application of Autodesk Fusion360 in Industrial Design

    Science.gov (United States)

    Song, P. P.; Qi, Y. M.; Cai, D. C.

    2018-05-01

    In 2016, Fusion 360, a productintroduced byAutodesk and integrating industrial design, structural design, mechanical simulation, and CAM, turns out a design platform supportingcollaboration and sharing both cross-platform and via the cloud. In previous products, design and manufacturing use to be isolated. In the course of design, research and development, the communication between designers and engineers used to go on through different software products, tool commands, and even industry terms. Moreover, difficulty also lies with the communication between design thoughts and machining strategies. Naturally, a difficult product design and R & D process would trigger a noticeable gap between the design model and the actual product. A complete product development process tends to cover several major areas, such as industrial design, mechanical design, rendering and animation, computer aided emulation (CAE), and computer aided manufacturing (CAM). Fusion 360, a perfect design solving the technical problems of cross-platform data exchange, realizes the effective control of cross-regional collaboration and presents an overview of collaboration and breaks the barriers between art and manufacturing, andblocks between design and processing. The “Eco-development of Fusion360 Industrial Chain” is both a significant means to and an inevitable trend forthe manufacturers and industrial designers to carry out innovation in China.

  11. Past, Present, and Future Business-to-Business and Industrial Marketing Research

    DEFF Research Database (Denmark)

    Lindgreen, Adam; Di Benedetto, C. Anthony; Geersbro, Jens

    2018-01-01

    This editorial summarizes both the development and impact of Peter LaPlaca, in terms of his work with and for the industrial and marketing purchasing research community, using several different perspectives. It also offers an overview of what (former) editors of other business-to-business marketing...... management journals think of Peter LaPlaca. Following that, this editorial briefly reviews dominant topics in Industrial Marketing Management....

  12. Rural development policy and food industry development

    DEFF Research Database (Denmark)

    Baker, Derek; Abildtrup, Jens; Hedetoft, Anders

    2007-01-01

    Food industry firms in remote areas face a set of constraints, which have motivated the form and function of assistance instruments under various regional and rural development programmes. Recent food industry developments present new challenges to these firms, for which available assistance may...... be less appropriate. This paper employs telephone interviews and workshop discussions with firms in isolated locations to investigate their satisfaction with assistance programmes, their ability to innovate (through product introductions) and respond to challenges in the food industry (the emergence...

  13. Construction and Development of CRM Technology and Industry Chain in China

    Science.gov (United States)

    Liu, Chunnian; Wang, Yonglong; Pan, Qin

    CRM is any application or initiative designed to help an organization optimize interactions with customers, suppliers, or prospects via one or more touch points. CRM has been interpreted and used in different ways by researchers in the various disciplines and researchers have identified a variety of technologies related to CRM. This paper highlights the implementation from the technology level and contributes to some successful factors in CRM application. The development of CRM is not fully developed in China. There are many critical factors that determine the CRM market development. Construction and development of CRM industry chain in China is a valuable research field and the paper provided some suggestions and analyses on it. In future, it requires our joint efforts of many aspects from every walk of life to make sure that CRM industry chain can improve and maturate gradually.

  14. The first IEC fusion industrial neutron generator and developments

    Science.gov (United States)

    Sved, John

    1999-06-01

    Inertial Electrostatic Confinement fusion grade plasma containment has been sporadically researched since the early 1960's. In the 1990's the work of G. H. Miley and his team at the University of Illinios, Fusion Studies Laboratory, Champaign-Urbana has stimulated a collaboration with industry. The development and test program for the first industrial IEC neutron generator has progressed to the point where an endurance test is under way to demonstrate at least 10,000 hours of operational life of the sealed chamber device without servicing. The market entry goals of steady 107 D-D n/s CW output with an air-cooled system have been achieved. DASA has invested in the development of the industrial product and the continuing basic research at the UI-FSL. The complete DASA FusionStar IEC-PS1 point source neutron generator set is described with emphasis on the interfaces to user NAA systems. The next product developments are pulsed neutron operations and higher fusion reaction rates of up to 1010 by means of affordable add-ons to the basic IEC-PS system. The production engineering experience gained will next be applied to a more challenging line source variant of the IEC. Beyond neutron and proton sources, several other IEC applications are being developed.

  15. Geographical Research Model of the Relation Between Tourism and Industry on the Framework of Pula

    Directory of Open Access Journals (Sweden)

    Nikola Vojnović

    2002-01-01

    Full Text Available The research gives a proposal of a theoretical research model, and can be the basis of geographical research of the relation between tourism and industry as two opposite human activities and branches of economy. The accent is set on the consideration of their relation in major urban areas, which show a parallel development of tourism and industry of the Second Industrial Revolution, typical for Croatian coastline region. The proposal of the research scheme, from the analysis of the present structure and the quantity, harmony and disharmony of both branches, to the possibility of creating an industrial-tourism region are analyzed in the first part of the work, whereas the results of the initial research are presented in the second part.

  16. Research on the recycling industry development model for typical exterior plastic components of end-of-life passenger vehicle based on the SWOT method.

    Science.gov (United States)

    Zhang, Hongshen; Chen, Ming

    2013-11-01

    In-depth studies on the recycling of typical automotive exterior plastic parts are significant and beneficial for environmental protection, energy conservation, and sustainable development of China. In the current study, several methods were used to analyze the recycling industry model for typical exterior parts of passenger vehicles in China. The strengths, weaknesses, opportunities, and challenges of the current recycling industry for typical exterior parts of passenger vehicles were analyzed comprehensively based on the SWOT method. The internal factor evaluation matrix and external factor evaluation matrix were used to evaluate the internal and external factors of the recycling industry. The recycling industry was found to respond well to all the factors and it was found to face good developing opportunities. Then, the cross-link strategies analysis for the typical exterior parts of the passenger car industry of China was conducted based on the SWOT analysis strategies and established SWOT matrix. Finally, based on the aforementioned research, the recycling industry model led by automobile manufacturers was promoted. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Multi-Disciplinary Research Experiences Integrated with Industry –Field Experiences

    Directory of Open Access Journals (Sweden)

    Suzanne Lunsford

    2015-10-01

    Full Text Available The purpose of this environmentally inquiry-based lab was to allow the students to engage into real-world concepts that integrate industry setting (Ohio Aggregate Industrial Mineral Association with the academia setting. Our students are engaged into a field trip where mining occurs to start the problem based learning of how the heavy metals leak in the mining process. These heavy metals such as lead and indium in the groundwater are a serious concern for the environment (Environmental Protection Agency from the mining process. The field experiences at the mining process assist in building our students interest in developing sensors to detect heavy metals of concern such as lead and indium simultaneously by a unique electrochemistry technique called Square Wave Anodic Stripping Voltammetry (SWASV. The field experience assists building the students interest in real –world application and what qualities do they want the electrochemical sensor to possess to be successful for real world usage. During the field trip the students are engaged into learning novel instrumentation such as an SEM (Scanning Electron Microscope to study the working electrode sensor developed to understand the sensor surface morphology properties better as well. The integration of industry setting with academia has been a positive experience for our students that has allowed their understanding of real-world science research needs to succeed in an industrial setting of research.

  18. Research on the Mode of Technology Innovation Alliance of the New Material Industry in Hunan Province

    Science.gov (United States)

    Wang, Fan

    2018-03-01

    One of the main directions of technology development in the 21st century is the development and application of new materials, and the key to the development of the new material industry lies in the industrial technology innovation. The gross scale of the new material industry in Hunan Province ranks the first array in China. Based on the present situation of Hunan’s new material industry, three modes of technology innovation alliance are put forward in this paper, namely the government-driven mode, the research-driven and the market-oriented mode. The government-driven mode is applicable to the major technology innovation fields with uncertain market prospect, high risk of innovation and government’s direct or indirect intervention;the research-driven mode is applicable to the key technology innovation fields with a high technology content; and the market-oriented mode is applicable to the general innovation fields in which enterprises have demands for technology innovation but such innovation must be achieved via cooperative research and development.

  19. Funding of Parkinson research from industry and US federal and foundation sources.

    Science.gov (United States)

    Dorsey, E Ray; Thompson, Joel P; Frasier, Mark; Sherer, Todd; Fiske, Brian; Nicholson, Sean; Johnston, S Claiborne; Holloway, Robert G; Moses, Hamilton

    2009-04-15

    Funding for biomedical and neuroscience research has increased over the last decade but without a concomitant increase in new therapies. This study's objectives were to determine the level and principal sources of recent funding for Parkinson disease (PD) research and to determine the current state of PD drug development. We determined the level and principal sources of recent funding for PD research from the following sources: US federal agencies, large PD foundations based in the United States, and global industry. We assessed the status of PD drug development through the use of a proprietary drug pipeline database. Funding for PD research from the sources examined was approximately $1.1 billion in 2003 and $1.2 billion in 2005. Industry accounted for 77% of support from 2003 to 2005. The number of drugs in development for PD increased from 67 in 2003 to 97 in 2007. Of the companies with at least one compound in development for PD in 2007, most were small (62% had annual revenue of less than $100 million), and most (53%) were based outside the United States. These companies will likely require partnerships to drive successful development of new PD therapies.

  20. UP-report. Energy intensive industry. Basis of the Development platform. Industry to the Swedish Energy Agency's strategy work FOKUS; UP-rapport. Energiintensiv industri. Underlag fraan Utvecklingsplattformen. Industri till Energimyndighetens strategiarbete FOKUS

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    The report serves as input to the Swedish Energy Agency's strategies and priorities for research and innovation under the thematic area of energy intensive industry for the period 2011 - 2016. The report has been compiled by members of the Development platform Industry. This report provides background and conditions for the energy intensive industry, and proposed priorities and activities for future efforts in this area. The development platform has contributed with valuable experience and knowledge which enabled the Swedish Energy Agency to then develop a strategy that meets needs of the society and business.

  1. Developing Entrepreneurial and Technology Commercialization Policies to Promote Cooperative Ventures Between NIH and Industry

    Science.gov (United States)

    Rossomando, Edward F.

    2001-03-01

    The NIH has had a great influence in guiding the biological research agenda for the last half of the 20th century. This may change if the increases in research funding from the private sector that occurred in the last ten years continue into the 21st century. Ten years ago, industry supplied 55% of the US R&D funds. In 2000, industry support of R&D had increased to 76%, with industry carrying out 70% of the nations applied and 91% of its development research. Given this shift, one of the biggest challenges that NIH may face in coming years is sharing control of America's research agenda with industry. For this to occur policies that encourage cooperative ventures with industry are needed. In a unique experiment, I was invited to the National Institute of Dental and Craniofacial Research (NIDCR), one of the 25 NIH Institutes and Centers, to develop programs and policies that would promote interactions with industry. This talk will introduce the strategy and programs developed to commercialize products and technologies from basic science discoveries and introducing an entrepreneurial atmosphere within the Institute. The results of this experiment will be discussed by comparing differences between discovery-driven and customer-driven innovation. One outcome of this experience is a greater appreciation of the obstacles to introducing disruptive technologies into the market place and of the paradigms that serve as barriers to commercialization. One recommendation is that the NIDCR consider a policy that allows for some participation by industry in setting the research and training agenda of the Institute, and that a mechanism for industry input be introduced into its administrative organization.

  2. Directory of French photovoltaic research and industry 2011

    International Nuclear Information System (INIS)

    Poubeau, Romain; Simmonet, Raphael; Canals, Jonathan

    2011-05-01

    After an overview of what is at stake in terms of industrial employment in the photovoltaic sector, a presentation of competitiveness clusters, a description of the value chain (cell manufacturers, arrays manufacturers, power inverter manufacturers, electric equipment manufacturers, structure component manufacturers, fabrication steps, etc.) in the photovoltaic sector, this document proposes a directory (addresses, activity descriptions) of research and industrial actors of the photovoltaic sector in France: research centres, manufacturers, industrial projects

  3. Strategic research field no.4, industrial innovations

    International Nuclear Information System (INIS)

    Kato, Chisachi

    2011-01-01

    'Kei'-supercomputer is planned to start its full-scale operation in about one year and a half. With this, High Performance Computing (HPC) is most likely to contribute not only to further progress in basic and applied sciences, but also to bringing about innovations in various fields of industries. It is expected to substantially shorten design time, drastically improve performance and/or liability of various industrial products, and greatly enhance safety of large-scale power plants. In this particle, six research themes, which are currently being prepared in this strategic research field, 'industrial innovations' so as to use 'Kei'-supercomputer as soon as it starts operations, will be briefly described regarding their specific goals and break-through that they are expected to bring about in industries. It is also explained how we have determined these themes. We are also planning several measures in order to promote widespread use of HPC including 'Kei'-supercomputer in industries, which will also be elaborated in this article. (author)

  4. Government Research and Development Policy for Telecommunications.

    Science.gov (United States)

    Cohen, Linda

    This paper investigates how recent changes in the telecommunications industry are likely to affect government research and development policies by analyzing how changes in the market structure--in particular, increased competition in the industry due to domestic deregulation and international competition--change the political economy of government…

  5. Regional characteristics relevant to advanced technology cogeneration development. [industrial energy

    Science.gov (United States)

    Manvi, R.

    1981-01-01

    To assist DOE in establishing research and development funding priorities in the area of advanced energy conversion technoloy, researchers at the Jet Propulsion Laboratory studied those specific factors within various regions of the country that may influence cogeneration with advanced energy conversion systems. Regional characteristics of advanced technology cogeneration possibilities are discussed, with primary emphasis given to coal derived fuels. Factors considered for the study were regional industry concentration, purchased fuel and electricity prices, environmental constraints, and other data of interest to industrial cogeneration.

  6. Research and development experience

    International Nuclear Information System (INIS)

    Slater, J.B.

    1980-06-01

    In the early 1950s, Atomic Energy of Canada Limited (AECL), in collaboration with Canadian industry and the power utilities, started on the task of developing and establishing the CANDU power reactor system and the necessary industrial infrastructure. While international activity provided a useful background and information to support Canadian activities, there were several unique features of the CANDU reactor which demanded specific programs of research and development work with a physics orientation. The four major areas were basic reactor physics, reactor control, heavy water and tritium monitoring and instruments and, finally, the potential of alternative fuel cycles. These four topics are discussed with the objective of providing an overview of what has been accomplished and what remains to be done. (auth)

  7. Government-University-Industry-Research Roundtable

    Energy Technology Data Exchange (ETDEWEB)

    1995-02-01

    Roundtable projects active during 1993 are described in this section. Projects completed in prior years are not included here, but publications resulting from them are included in the list of publications which are attached. Such prior projects include nurturing science and engineering talent, research facility financing, multidisciplinary research and education, university-industry-federal laboratory partnerships, and federal-state cooperation in science and technology.

  8. The development of the UK landfill gas industry: an overview

    International Nuclear Information System (INIS)

    Moss, H.

    1996-01-01

    The UK's landfill gas research started in 1978 and led to the first commercial scheme in 1981 where the gas was used to fire a brick kiln. Electricity generation followed in 1984. Although by 1990 there were nearly two dozen operational schemes, the real impetus to usage was given by the NFFO. Here all electricity generated could be sold irrespective of the demand. Although the Department of Energy - and latterly the Department of Trade and Industry - invested substantial monies in the early research and development, the greatest factor in the success of the industry has been willingness to take its own risks. The industry must now learn to live with lower revenues and heightened environmental requirements. (Author)

  9. IPAD: A unique approach to government/industry cooperation for technology development and transfer

    Science.gov (United States)

    Fulton, Robert E.; Salley, George C.

    1985-01-01

    A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

  10. Development and application of industrial radioisotope instruments in China

    International Nuclear Information System (INIS)

    Lu Yanxiao

    1994-09-01

    Industrial radioisotope instruments are emerging as advanced monitoring, controlling and automation tools for industries in China. Especially the on-line analysis systems based on radioisotope instruments, referred to as nucleonic control systems (NCS), have more and more important role in the modernization and optimization of industrial processes. Over nearly four decades significant progress has been made in the development and application of radioisotope instruments in China. After a brief review of the history of radioisotope instruments, the state of the art of this kind of instruments and recent examples of their applications are given. Technical and economic benefits have resulted from the industrial applications of radioisotope instruments and the sales of products of their own in marketing. It is expected that along with the high speed growth of national economy, there will be greater demand for radioisotope instruments and nucleonic control systems in Chinese industry to promote the technological transformation and progress of traditional industries and to establish high-tech industries with technology-intensive products. Sustained efforts for the research and development of radioisotope instrument should be made to up-grade domestic instruments and to satisfy the needs of the smaller scale industries more common in China for low cost systems. (1 fig., 2 tabs.)

  11. Accelerating the implementation of the clean development mechanism in South African industry

    Directory of Open Access Journals (Sweden)

    G Little

    2014-05-01

    Full Text Available One of the responses to the threat of global warming is the Kyoto Protocol and the associated Clean Development Mechanism (CDM to reduce greenhouse gases. South Africa is an ideal country for the implementation of industrial CDM projects, yet lags behind many other countries. This qualitative research determines the factors that cause South Africa to lag other developing countries in the implementation of industrial CDM projects and the interventions that will have the most impact on accelerating implementation. The research involved interviews with 30 experts involved in the South African CDM process. The results identify the factors perceived to be facilitating and inhibiting the use of CDM opportunities and a framework for CDM practitioners to develop an implementation strategy within South African industry is established.

  12. Exploring the Driving Factors of Construction Industrialization Development in China

    Directory of Open Access Journals (Sweden)

    Xiaer Xiahou

    2018-03-01

    Full Text Available Construction industrialization (CI has been adopted worldwide because of its potential benefits. However, current research shows the incentives for adopting CI may differ in different regions. While the promotion of CI in China is still at the initial stage, a systematical analysis of the driving factors would help decision makers get a comprehensive understanding of CI development and select proper strategies to promote CI. This research combines qualitative and quantitative methods to explore the construction industrialization driving factors (CIDFs in China. The grounded theory method (GTM was employed to explore CI concepts among 182 CI-related articles published in 10 top-tier journals from 2000 to 2017. A total of 15 CIDFs were identified, including one suggested by professionals during a pre-test questionnaire survey. The analysis showed that the development of CI in China is pushed by macrodevelopment and pulled by the government and is also a self-driven process. The major driving factors for CI adoption in China are the transformation and upgrade of the conventional construction industry and the solution of development dilemmas. Our study also suggests that pilot programs are, currently, the most effective method to promote CI in China and to accumulate experience so to gain recognition by the society. This research is also of value for CI promotion in other developing countries.

  13. Exploring the Driving Factors of Construction Industrialization Development in China

    Science.gov (United States)

    Xiahou, Xiaer; Yuan, Jingfeng; Tang, Yuchun; Li, Qiming

    2018-01-01

    Construction industrialization (CI) has been adopted worldwide because of its potential benefits. However, current research shows the incentives for adopting CI may differ in different regions. While the promotion of CI in China is still at the initial stage, a systematical analysis of the driving factors would help decision makers get a comprehensive understanding of CI development and select proper strategies to promote CI. This research combines qualitative and quantitative methods to explore the construction industrialization driving factors (CIDFs) in China. The grounded theory method (GTM) was employed to explore CI concepts among 182 CI-related articles published in 10 top-tier journals from 2000 to 2017. A total of 15 CIDFs were identified, including one suggested by professionals during a pre-test questionnaire survey. The analysis showed that the development of CI in China is pushed by macrodevelopment and pulled by the government and is also a self-driven process. The major driving factors for CI adoption in China are the transformation and upgrade of the conventional construction industry and the solution of development dilemmas. Our study also suggests that pilot programs are, currently, the most effective method to promote CI in China and to accumulate experience so to gain recognition by the society. This research is also of value for CI promotion in other developing countries. PMID:29510507

  14. The Research and Development of COM-PLY Lumber

    Science.gov (United States)

    Robert H. McAlister

    1989-01-01

    Between 1974 and 1986, a Southeastern Station Research Work Unit developed standards for composite studs, joists, and truss lumber and manufactured and demonstrated the materials. Economic feasibility was considered in every stage of research. Further development is left to industry.

  15. Construction industry in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Moavenzadeh, F

    1978-01-01

    This paper provides a review of the construction capability available in the developing countries to meet the demand for shelter. It discusses the role of construction in the process of development and its importance to economic growth. It considers the issue facing the growth of a viable indigenous construction industry in the developing world within the context of the activities involved in the creation of constructed facilities--planning, design, contruction and maintenance; it also examines the environment within which the industry has developed. For each construction activity the paper reviews available capabilities, the various resources needed for the development of an indigenous industry, and some possible means of accommodating these needs.

  16. Microbiological research and development for the food industry

    National Research Council Canada - National Science Library

    Taormina, Peter J

    2013-01-01

    "This book serves as a primer and reference for industrial food microbiologists who typically gain the information provided through on-the-job experience or from a consultant instead of in the classroom...

  17. Forum Notes: The 1999 environmental research and technology development forum for the upstream oil and gas industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-04

    This conference provided an opportunity to exchange information on current research and development projects regarding the environment and the petroleum industry. In addition to summaries of the various sessions, the booklet also includes a list of registrants and poster session participants. The conference was divided into the following three sessions: (1) site remediation, site restoration and groundwater, (2) ecological health, cumulative effects and agriculture, and (3) flaring, odour and greenhouse gas emissions. The session on site remediation heard papers that dealt with feedback on existing projects including soil quality guidelines for crude oil in agricultural soils, hydrophobicity, assessment of phytoremediation as an in-situ technique for cleaning sites polluted by oil, remediation using wetlands, land application of bioremediated soils, and flare pit characterization. The session on ecological health was treated to presentations describing research and development projects including the Eastern Slopes Grizzly Bear Project, the Native Prairie Revegetation Project, and the Caroline Livestock Study. The session on flaring and greenhouse gas emissions described research and development projects on dehydrator benzene emissions, monitoring of odour causing compounds, flare speciation, flare performance, improved liquid separation, alternate technologies, improved measurement of methane fugitive emissions from gas operations, and methane emissions from heavy oil operations.

  18. Forum Notes: The 1999 environmental research and technology development forum for the upstream oil and gas industry

    International Nuclear Information System (INIS)

    1999-01-01

    This conference provided an opportunity to exchange information on current research and development projects regarding the environment and the petroleum industry. In addition to summaries of the various sessions, the booklet also includes a list of registrants and poster session participants. The conference was divided into the following three sessions: (1) site remediation, site restoration and groundwater, (2) ecological health, cumulative effects and agriculture, and (3) flaring, odour and greenhouse gas emissions. The session on site remediation heard papers that dealt with feedback on existing projects including soil quality guidelines for crude oil in agricultural soils, hydrophobicity, assessment of phytoremediation as an in-situ technique for cleaning sites polluted by oil, remediation using wetlands, land application of bioremediated soils, and flare pit characterization. The session on ecological health was treated to presentations describing research and development projects including the Eastern Slopes Grizzly Bear Project, the Native Prairie Revegetation Project, and the Caroline Livestock Study. The session on flaring and greenhouse gas emissions described research and development projects on dehydrator benzene emissions, monitoring of odour causing compounds, flare speciation, flare performance, improved liquid separation, alternate technologies, improved measurement of methane fugitive emissions from gas operations, and methane emissions from heavy oil operations

  19. Design for energy efficiency: Energy efficient industrialized housing research program. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Kellett, R.; Berg, R.; Paz, A.; Brown, G.Z.

    1991-03-01

    Since 1989, the U.S. Department of Energy has sponsored the Energy Efficient Industrialized Housing research program (EEIH) to improve the energy efficiency of industrialized housing. Two research centers share responsibility for this program: The Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. Additional funding is provided through the participation of private industry, state governments and utilities. The program is guided by a steering committee comprised of industry and government representatives. This report summarizes Fiscal Year (FY) 1990 activities and progress, and proposed activities for FY 1991 in Task 2.1 Design for Energy Efficiency. This task establishes a vision of energy conservation opportunities in critical regions, market segments, climate zones and manufacturing strategies significant to industrialized housing in the 21st Century. In early FY 1990, four problem statements were developed to define future housing demand scenarios inclusive of issues of energy efficiency, housing design and manufacturing. Literature surveys were completed to assess seven areas of influence for industrialized housing and energy conservation in the future. Fifty-five future trends were identified in computing and design process; manufacturing process; construction materials, components and systems; energy and environment; demographic context; economic context; and planning policy and regulatory context.

  20. Advances in research and development of mango industry

    Directory of Open Access Journals (Sweden)

    Ian S. E. Bally

    2011-10-01

    Full Text Available World mango production is spread over 100 countries that produce over 34.3 million tons of fruit annually. Eighty percent of this production is based in the top nine producing nations that also consume upward of 90% of their production domestically. One to 2 percent of fruit is traded internationally in to markets in the European Community, USA, Arabian Peninsula and Asia. This paper outlines some of the recent research and development advances in mango breeding and genomics, rootstock development, disease management and harvest technologies that are influencing the production and quality of mango fruit traded domestically and internationally.

  1. Industrial structure at research reactor suppliers

    International Nuclear Information System (INIS)

    Roegler, H.-J.; Bogusch, E.; Friebe, T.

    2001-01-01

    Due to the recent joining of the forces of Framatome S. A. from France and the Nuclear Division of Siemens AG Power Generation (KWU) from Germany to a Joint Venture named Framatome Advanced Nuclear Power S.A.S., the issue of the necessary and of the optimal industrial structure for nuclear projects as a research reactor is, was discussed internally often and intensively. That discussion took place also in the other technical fields such as Services for NPPs but also in the field of interest here, i. e. Research Reactors. In summarizing the statements of this presentation one can about state that: Research Reactors are easier to build than NPPs, but not standardised; Research Reactors need a wide spectrum of skills and experiences; to design and build Research Reactors needs an experienced team especially in terms of management and interfaces; Research Reactors need background from built reference plants more than from operating plants; Research Reactors need knowledge of suitable experienced subsuppliers. Two more essential conclusions as industry involved in constructing and upgrading research reactors are: Research Reactors by far are more than a suitable core that generates a high neutron flux; every institution that designs and builds a Research Reactor lacks quality or causes safety problems, damages the reputation of the entire community

  2. Size and Distribution of Research Benefits in the Australian Dairy Industry

    OpenAIRE

    Liu, Esther; Tarrant, Katherine A.; Ho, Christie K.M.; Malcolm, Bill; Griffith, Garry R.

    2012-01-01

    An equilibrium displacement model of the Australian dairy industry is being developed for estimating the net benefits from dairy research undertaken by DPI Victoria. In this initial version, the dairy industry is represented by a system of aggregate demand and supply relationships for two input sectors, raw milk and milk processing inputs, and three output sectors, export and domestic manufactured milk and domestic fluid milk. Quantities and prices are calibrated in terms of milk equivalents....

  3. Coal chemical industry and its sustainable development in China

    International Nuclear Information System (INIS)

    Xie, Kechang; Li, Wenying; Zhao, Wei

    2010-01-01

    China is rich in coal resource, which is vital for energy security in this country. In early 21st century, the coal chemical industry in China will be oriented to the development of high efficiency, safety, cleanliness, and optimum utilization. In this review, the authors present an introduction to the utilization status of primary energy production and consumption in China. Since 2005, fundamental research studies, supported by the Ministry of Science and Technology of Chinese National Basic Research Program, have been carried out at Taiyuan University of Technology. The Ministry stresses that the new coal chemical industry should be developed in a sustainable manner to realize effective utilization of energy. Moreover, upgrading the high technology to improve actively the recycling processes of coal chemical engineering is of strategic importance to realize the modern coal chemical engineering.

  4. Industry sponsorship and research outcome

    DEFF Research Database (Denmark)

    Lundh, Andreas; Sismondo, Sergio; Lexchin, Joel

    2012-01-01

    Clinical research affecting how doctors practice medicine is increasingly sponsored by companies that make drugs and medical devices. Previous systematic reviews have found that pharmaceutical industry sponsored studies are more often favorable to the sponsor's product compared with studies...

  5. Materials design and development of functional materials for industry

    International Nuclear Information System (INIS)

    Asahi, Ryoji; Morikawa, Takeshi; Hazama, Hirofumi; Matsubara, Masato

    2008-01-01

    It is now well recognized that we are witnessing a golden age of innovation with novel materials, with discoveries that are important for both basic science and industry. With the development of theory along with computing power, quantum materials design-the synthesis of materials with the desired properties in a controlled way via materials engineering on the atomic scale-is becoming a major component of materials research. Computational prediction based on first-principles calculations has helped to find an efficient way to develop materials that are much needed for industry, as we have seen in the successful development of visible-light sensitized photocatalysts and thermoelectric materials. Close collaboration between theory and experiment is emphasized as an essential for success

  6. A primer on industrial ecosystems : a strategy for sustainable industrial development

    Energy Technology Data Exchange (ETDEWEB)

    Cote, R P [Dalhousie Univ., Halifax, NS (Canada). Eco-Efficiency Centre; [Dalhousie Univ., Halifax, NS (Canada). Faculty of Management, School for Resource and Environmental Studies

    2003-07-01

    Industrial ecology incorporates ecological theories, functions and limits into the design of industrial production systems, processes and products. The main objective is to enhance environmental and economic performance through collaboration in managing environmental resource issues such as energy, water and materials. Industrial ecology recognizes the connectedness and synergies of materials, products and infrastructure. As such, it considers the life cycle of products, the design of buildings, infrastructure and industrial parks. By working together, businesses gain a collective benefit which is greater than the total of the individual benefits each company could achieve on its own. Industrial ecology also considers the reuse, recovery and recycling of resources. The benefits include: efficiency of resource use; cost reduction for industrial infrastructure; sustainable development support; and, new opportunities in economic development, technology development, manufacturing, and business management. This primer also presents guidelines for win-win projects in industrial ecology. refs., figs.

  7. Government and industry roles in heavy oil resource development

    International Nuclear Information System (INIS)

    Sharp, D.A.

    1994-01-01

    Developing a heavy oil deposit in Canada requires proper reservoir selection and ongoing resrvoir management. The number of unexploited heavy oil reservoirs whch can be economically produced through primary methods is rapidly declining. In addition, primary recoveries of 5-10% of the heavy oil in place are unacceptable and recovery rates of over 50% are needed. Enhanced thermal recovery projects are therefore needed, but these entail significant technical and commodity pricing risks. It is suggested that provincial governments recognize those risks and offer incentives by not encumbering such projects with up-front royalties. If industry is to assume the risks, governments must develop a fiscal regime that allows for a satisfactory return on capital and acceptable sharing of profits. At the federal level, it is suggested to broaden the interpretation of research and development activity to include enhanced recovery projects, making the tax breaks available to scientific research also available to heavy oil development. Government policies favoring heavy oil in Saskatchewan and Alberta are cited as good examples of ways to encourage the heavy oil industry

  8. Applied and industrial activities at the ESRF: Present status and future development

    CERN Document Server

    Doucet, J

    2003-01-01

    Be it proteins, new superconductors, polymers or ferro-magnetic compounds, fundamental research is laying foundations for possible technical applications as well as industrial exploitation. At the ESRF, industrial companies can be involved in two main ways, depending on the type of research they are interested in. The first concerns beam time allocation for non-proprietary and fully-published research, the procedure is the same as for public laboratories. The second concerns the proprietary research, for which a fee is charged and where results are kept confidential. The use of synchrotron radiation for the characterisation of materials is certain to play a crucial role in the development of new materials in the close future. It is a policy of the ESRF that European industry should share the benefit of its facilities. A survey of the today industrial activity at the ESRF and of its perspective in near future is presented.

  9. THE ROLE OF RESEARCH IN RESHAPING TEXTILE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Adriana UNGUREANU

    2017-06-01

    Full Text Available Apparently, the international competition seems to be moved to the area of investments in new technologies waiting for results in the near future. Nanotechnology is by far the most wanted by investors. The last twenty years the investments in nanotechnology became the priority for all the developed states and this trend was followed by the less developed countries. At the opposite side, there are countries as Romania that seem to lose the start in front of those very active in this field. This paper tries to present the role of the Romanian Research and Development activity to reshape the textile industry through new technologies and nanotechnologies especially. To gather the proper information, the in-depth interview method was used. The conclusions reveal that state keeps the key for a good research activity by offering stable and consistent support. At the same time, a lot of measures or recommendations could be a pragmatic solution to take seriously the role of the research activity to bring its contribution for this big challenge.

  10. INDUSTRIAL TECHNOLOGICAL RESEARCH «DEVELOPMENT OF RUSSIAN MARKET OF NANOTECHNOLOGICAL PRODUCTS IN CONSTRUCTION UNTIL 2020». PART 2. ANALYSIS OF THE WORLD MARKET

    Directory of Open Access Journals (Sweden)

    GUSEV Boris Vladimirovich

    2013-04-01

    Full Text Available Some results of the industrial research «Development of Russian market of nanotechnological products in construction until 2020» have been published. Authors invite all interested specialists and specialized organization to take part in the broad public discussion.

  11. Evolution of civil aircraft industry development

    Directory of Open Access Journals (Sweden)

    Aram I. Afyan

    2017-01-01

    Full Text Available Civil aircraft industry market is а complex multistage system of manufacturers and consumers, which affects countries all over the world. The globalization and world economic growth caused inevitable merger of national markets into one system where the key role belongs to few corporations. In the article the author analyze peculiarities of civil aircraft industry global market shaping. Main reasons of aircraft industry centers appearance are considered through socio political and economic development of the industry. Factors that caused national specialization of manufacturing countries are examined along with peculiarities of Boeing leadership. The main stages of the industry development are described starting from the beginning of the 20th century up to the present day. The author highlights specific characters of European manufacturers development and their merger into one multinational conglomerate. Besides, modern market status is examined through benchmark study of the main competitors. Main tendencies of the industry are segmentation and new aviation industry clusters appearance. Key actors of regional aviation are described, which are Embraer and Bombardier. Reasons of their appearance and development are analyzed. Main pretenders for the aviation industry global market entrance are outlined.

  12. Emerging trends in contract research industry in India.

    Science.gov (United States)

    Drabu, Sushma; Gupta, Alka; Bhadauria, Anupama

    2010-09-01

    A Contract Research Organization (CRO) is a service organization that provides support to the pharmaceutical industry and offers a wide range of "outsourced" pharmaceutical research services to aid in R&D process and is thus an essential tool for undertaking clinical trials in the present scenario when high stakes are involved in the drug discovery process. This industry also offers a safe option of investment as the industry is largely recession-proof, with a significant upscale growth. Presently India occupies a very small pie of the global market share in the Clinical Trials Industry but it is estimated to conduct nearly 5% of global clinical trials by 2012. The global CRO industry valued $18 bn in 2008 and the market is expected to grow at an annual rate of 14% between 2009 and 13. Top multinational pharmaceuticals companies are venturing into the Indian business, in collaboration with the Indian Drug Companies. According to a recent study by Mckinsey & Company, the Indian Clinical Research Industry can attract $1.5 bn of revenue from US and EU by 2010. Such an increase in outsourcing from the western countries has led the global pharma companies and Indian entrepreneurs to set up Contract Research Organizations (CROs) in India. To bring this into realization and fulfil the market demand, while simultaneously aiding in improving the country's economical standards and market position, joint and well-coordinated efforts on part of the government, industry, and working professionals are needed in terms of regulatory affairs, audits, transparency in work affairs, garnering patient confidence, and pharmacovigilance. Copyright 2010 Elsevier Inc. All rights reserved.

  13. Knowledge sharing in industrial research

    NARCIS (Netherlands)

    Berends, J.J.

    2003-01-01

    Over the past decade, the field of organization studies has increasingly focused on knowledge and knowledge processes in organizations. This thesis describes a study of one of those processes, knowledge sharing, in the context of industrial research. Though the attention for knowledge in

  14. Neo-industrialization of Kuzbass economy in innovative development of coal industry and machinery

    Directory of Open Access Journals (Sweden)

    Balabanova Anna

    2017-01-01

    Full Text Available As part of rental-resource model and access restrictions to capital and new technologies, the attempts to encourage import substitution made by the government do not generate innovative type of economic development and reconstruction of economy’s manufacturing industry competitive on the domestic market. In conditions of searching for a new model of Russian economy development the analysis of a number of problems such as industry degradation, reducing the competitiveness of Russian producers, the growth of structural imbalances and overcoming the negative macroeconomic trends becomes strategically important. This raises the value of neo-industrialization as the integrator of resource security, scientific and industrial potential of Russian economy and high capacity of the domestic market in the innovative development system. A special role neo-industrialization plays for the economic development of old industrial regions, which include Kuzbass (Western Siberia, Russia. Neo-industrial development of Kuzbass economy should be initiated by the technological modernization of mining machinery and innovative development of coal industry.

  15. [Food industry funding and epidemiologic research in public health nutrition].

    Science.gov (United States)

    Navarrete-Muñoz, Eva María; Tardón, Adonina; Romaguera, Dora; Martínez-González, Miguel Ángel; Vioque, Jesús

    The interests of the food industry to fund nutrition and health research are not limited to promoting scientific advances. Recently, several systematic reviews conducted about the effect of sugar-sweetened beverages and health outcomes have shown some biased conclusions in studies that acknowledge industry sponsorship. In this context, the Nutrition Working Group of the Spanish Epidemiology Society presented a scientific session entitled Food industry and epidemiologic research at its annual meeting. In a round table, four experts in nutrition research presented their points of view about whether the food industry should fund nutrition-related research and the related potential conflicts of interest of the food industry. All the experts agreed not only on defending independence in nutritional epidemiology regarding the design, interpretation and conclusion of their studies but also on the crucial need for guaranteed scientific rigor, scientific quality of the results and measures to protect studies against potential biases related to the conflicts of interest of funding by the food industry. Drs Pérez-Farinós and Romaguera believe that the most effective way to prevent conflicts of interest would be not to allow the food industry to fund nutrition research; Drs Marcos and Martínez-González suggested the need to establish mechanisms and strategies to prevent the potential influences of the food industry in selecting researchers or institutional sponsorship and in the analysis and results of the studies, to ensure maximum independence for researchers, as well as their professional ethics. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  16. An overview of the development of solar water heater industry in China

    International Nuclear Information System (INIS)

    Runqing, Hu; Peijun, Sun; Zhongying, Wang

    2012-01-01

    This article introduce the development of China solar water heater industry .Gives an overview of stages, market, manufacturing, application and testing about China solar water heater industry. Show the market data from 1998 to 2009. Analyze the experiences and features about the industry. The article also introduces the policy for solar hot water industry in China. These policies have accelerated the development of industry in which the main two incentive policies have the greatest influence on solar water heater industry. First one is the policy of mandatory installation of solar water heater implemented since 2007 by some local governments at provincial and municipal levels. Second is the subsidy policy for solar water heaters in the household appliances going to the countryside scheme implemented since 2009. At last the article gives the reason why China solar water heater industry have so rapid growth. From technology research, industrialization, prices and policy environment gives analysis. - Highlights: ► We compared International and China market about solar thermal products. ► The reason for rapid development of China solar water heater is explained. ► The experience of China solar water heater industry would give reference to other develop country. ► “Meet the demands of customer” is the main driver for the solar water heater industry development. ► The policy framework about China solar thermal industry was introduced. The industry achieved commercial operation without subsidy.

  17. Developing scenarios for the Norwegian travel industry 2025

    Directory of Open Access Journals (Sweden)

    Anniken Enger

    2015-03-01

    Full Text Available Purpose – The Norwegian travel industry faces decline in important international tourism segments and needs an industry wide and future‐oriented strategy to face these challenges. Accordingly, a common understanding of future drivers and different scenarios for the industry is needed. The paper aims to discuss these issues. Design/methodology/approach – Using the process of scenario analysis and drawing upon the involvement of the tourism industry, this paper describes the method, drivers, scenarios, and implications. Findings – The research identified six important drivers with predictable outcomes: uneven global economic development, digitalization, climate change, consumer demand – return on time, centralization, and demography. The Norwegian economy and Norwegian politics were the two drivers that stood out as the most significant for the tourism industry, with a very uncertain outcome, and constituted the two axes of the scenarios. This resulted in four scenarios: Money Rules, The Urban Diamond, Opportunities for All, and Master Plan. Practical implications – The four scenarios represent different economic value of international tourism in Norway. The Opportunities for All and Master Plan scenarios represent the greatest economic value for Norwegian tourism. They indicate great opportunities for tourism to become the “new oil” in Norway if the oil economy declines. The two scenarios differ with respect to the degree of governance control vs market liberalization. The scenarios will be used to identify implications and risks for different parts of the tourism industry, and to further explore how governance control and market liberalization may be combined. Originality/value – The research identified six drivers which are significant for the Norwegian tourism industry. This resulted in four scenarios which are used to identify implications and risks for different parts of the industry.

  18. Science for Energy Technology: Strengthening the Link Between Basic Research and Industry

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-04-01

    The nation faces two severe challenges that will determine our prosperity for decades to come: assuring clean, secure, and sustainable energy to power our world, and establishing a new foundation for enduring economic and jobs growth. These challenges are linked: the global demand for clean sustainable energy is an unprecedented economic opportunity for creating jobs and exporting energy technology to the developing and developed world. But achieving the tremendous potential of clean energy technology is not easy. In contrast to traditional fossil fuel-based technologies, clean energy technologies are in their infancy, operating far below their potential, with many scientific and technological challenges to overcome. Industry is ultimately the agent for commercializing clean energy technology and for reestablishing the foundation for our economic and jobs growth. For industry to succeed in these challenges, it must overcome many roadblocks and continuously innovate new generations of renewable, sustainable, and low-carbon energy technologies such as solar energy, carbon sequestration, nuclear energy, electricity delivery and efficiency, solid state lighting, batteries and biofuels. The roadblocks to higher performing clean energy technology are not just challenges of engineering design but are also limited by scientific understanding.Innovation relies on contributions from basic research to bridge major gaps in our understanding of the phenomena that limit efficiency, performance, or lifetime of the materials or chemistries of these sustainable energy technologies. Thus, efforts aimed at understanding the scientific issues behind performance limitations can have a real and immediate impact on cost, reliability, and performance of technology, and ultimately a transformative impact on our economy. With its broad research base and unique scientific user facilities, the DOE Office of Basic Energy Sciences (BES) is ideally positioned to address these needs. BES has laid

  19. Research and development of CRIEPI

    International Nuclear Information System (INIS)

    Akita, Shirabe

    2008-01-01

    Central Research Institute of Electric Power Industry (CRIEPI) reported its R and D of nuclear power technologies. The research results of light water reactor aging deterioration contain the estimation method of irradiation embrittlement of pressure vessel, stress corrosion cracking of piping and core internal structure, and pipe thinning. The backend project support researches include transpiration and storage of recycle fuel, the high-level radioactive waste disposal and low-level radioactive waste disposal. Safety of concrete cask storage was confirmed by the falling test, SCC test and vibration test. The researches for the next generation nuclear technologies have developed the pyrochemical reprocessing process for the metal fuel and oxide fuel, and development of metal fuel with U, Pu and Zr. Assist management of development of fast reactor is proceeding. One of researches of radiation safety is on low dose X-ray bystander effect on the diabetes mellitus of model mouse. (S.Y.)

  20. Competitive Research Grants and Industry Collaboration: A Challenge for Universities in the 1990s.

    Science.gov (United States)

    Johnson, Peter

    1993-01-01

    The reasons for increased collaboration between Australian universities and industry are examined, focusing on competitive research grant programs developed by the government in the last decade. University and industry response to these opportunities and to issues such as intellectual property rights and publication rights are discussed. (MSE)

  1. Improving industrial designers work process by involving user research

    DEFF Research Database (Denmark)

    Dai, Zheng; Ómarsson, Ólafur

    2011-01-01

    With changing times, new technologies and more opinionated consumers, the modern industrial designer has found himself in need of fresher and more up to date approaches in his daily work. In a fast moving industry, the designer needs to keep a thinking process of dynamic and subjective attitude...... will give the grounding for believing that the industrial designer needs to adopt user research methods to a level where he can still continue to work under the very nature of industrial design that has made it a successful practice for the last century. The combing of the approaches and attitude will help....... User research is part of user centered design (UCD). UCD has a reputation for subjective and reflective practice. In this paper there are two example cases. One is conducted by a classical industrial design process, and another is costing half of energy and time in user research. These examples...

  2. Measurement Method and Empirical Research on the Sustainable Development Capability of a Regional Industrial System Based on Ecological Niche Theory in China

    Directory of Open Access Journals (Sweden)

    Hang Yin

    2014-11-01

    Full Text Available From the analytical view of a recycling economy, the regional system achieves the goal of sustainable development through improving resource utilization efficiency, reducing energy consumption and ameliorating the quality of water and air. The regional economic system’s potential for sustainable development is significantly influenced by regional industrial operational efficiency, which measures the cost of ecology, environment, energy and resources accompanying the economic growth. It is vital for national and regional governments to accelerate harmonious development between products of industrial department, consumption of energy and pollutants discharged. Under the guidance of ecological niche theory and recycling economy theory, the theoretical analysis on efficient relations between regional industrial growth, energy consumption, resources utilization and environmental carrying capacity has been carried out from horizontal and vertical respects. Industrial operational efficiency and the sensitivity coefficient in response to the change of every input and output index can be calculated and critical factors, which restrict sustainable development capability, can be found out so that quantitative references could be provided for administrative decisions. As for the measurement method, a super efficiency mixed data envelopment analysis model, which wipes off self-limited condition and either contains both meeting cone characteristic indexes or not, has been established and applied. Statistics from 1993 to 2012 in China are collected to carry out empirical research. On the basis of further analysis, an adjustment strategy can be constituted to improve the capability for sustainable development.

  3. The National Nanotechnology Initiative: Research and Development Leading to a Revolution in Technology and Industry

    Science.gov (United States)

    2010-02-01

    dual-use deliveries to entice commercial interest at the earliest stages. NRO transition goals aim to create commercial “ pull ” to enable rapid... GOALI ), Partnerships for Innovation (PFI) , and Industry-University Cooperative Research Centers (IUCRC) • Partnership with small businesses and large

  4. Washington State Biofuels Industry Development

    Energy Technology Data Exchange (ETDEWEB)

    Gustafson, Richard [Univ. of Washington, Seattle, WA (United States)

    2017-04-09

    The funding from this research grant enabled us to design, renovate, and equip laboratories to support University of Washington biofuels research program. The research that is being done with the equipment from this grant will facilitate the establishment of a biofuels industry in the Pacific Northwest and enable the University of Washington to launch a substantial biofuels and bio-based product research program.

  5. Integrating developing country manufacturing industries into global supply chain

    Directory of Open Access Journals (Sweden)

    Fasika Bete Georgise

    2014-01-01

    Full Text Available Purpose: Due to globalization of manufacturing activities, the arena of competition and competitiveness advantage is moving from firms towards supply chains and networks. With the recent advancement of information and communication technologies this participation are becoming as common business practice in developed countries firms. Companies were more integrated into the world market for the global nature of the sourcing, manufacturing and distribution. These changes create both challenges and opportunities for the manufacturing industries in developing countries. The objective of this paper is to examine the level of inter-organizational and intra-organizational supply chain integration practices in developing country, Ethiopia.Design/methodology/approach: An industrial questionnaires survey was used to collect the current practices of the manufacturing industries in Ethiopia as an example of the developing countries. Descriptive statistics is primarily used for the analysis.Findings: Results show a low level of supply chain relationship both in intra and inter organizational supply chain integration level among members. Accordingly, such issues require much attention to facilitate a greater integration within the supply chains in the Ethiopian manufacturing industries.Research limitations/implications: The paper focuses on examining the practices of Ethiopian manufacturing industries empirical data. The interpretation of results should be taken with prudence.Originality/Value: The manufacturing industry in developing countries (MIDC has been a part of the global supply chains for long time as a supplier of raw material and manufacturer of primary products. Currently, the MIDC is trying to access the different markets segment of the world even with new products starting from their local market to the complex and dynamic international market. Nevertheless, their supply chains are inefficient and hence, their competitiveness level far from the

  6. North Dakota Senior High Industrial Arts Program of Studies--Level II. Research Series No. 80.

    Science.gov (United States)

    North Dakota State Board for Vocational Education, Bismarck. Research Coordinating Unit.

    This industrial arts program of a studies guide is the product of a research project designed to (1) ascertain programs and curricula trends of senior high school industrial arts in the fifty states, (2) develop a philosophical rationale for senior high schools in North Dakota secondary schools, and (3) develop a master plan and program of study…

  7. Development of university-industry partnerships in railroad engineering education

    Science.gov (United States)

    Lautala, Pasi T.

    to high demand for rail transportation and an older engineering workforce with the greatest demand for civil, electrical and mechanical engineers with bachelor's degrees. The rail industry and universities have grown apart over the past several decades, as rail programs and courses were abandoned at universities and there were very limited recruitment and research activities by the railroads at universities. Today, specialized course(s) in rail topics are offered at approximately three percent of ABET accredited civil engineering programs in the U.S. and only 16 percent of engineers who responded to the survey had received university exposure to rail topics. The research findings suggest that increased university participation has the potential to assist the rail industry in all aspects related to attracting, educating, recruiting, training and retaining engineering graduates. The primary advantages would be greater industry visibility and student knowledge in rail topics. Increased prior knowledge, on the other hand, improves the effectiveness of industry training programs and offers a potential for sizable training cost reductions. As a final conclusion, the research suggests that the most effective approach for developing future railroad engineers is a balancing act where the responsibilities should be shared by the rail industry and universities based on each others strengths. University participation should include multiple types and levels, including introductory lectures, co-op/internship programs, courses in railroad engineering, and a minor or certificate in railroad engineering that would include several courses. Due to the urgent demand for railroad engineers and time it takes to rebuild the expertise on campuses, the development process should begin immediately, be incremental, and utilize concepts, such as cooperation with other universities or engineer-in-residence, that reduce the demand of internal university resources. The challenges to the process

  8. Development of laser spectroscopic technology in nuclear industry

    International Nuclear Information System (INIS)

    Lee, Jong Min; Cha, Byung Heon; Kim, Seong Ho; Cha, Hyung Ki; Lim, Chang Hwan; Song, Kye Seok; Kim, Jung Bok; Rho, Si Pyo; Han, Jae Min; Jeong, Do Yung; Lee, Jong Hoon; Choi, Hwa Lim; Yoo, Byung Duk; Choi, An Sung; Lee, Byung Chul; Kim, Chul Jung

    1992-05-01

    The goal of this project is to carry out the fundamental researches for the selective photoionization process of heavy atoms as well as the development of experimentally related instruments. Main research results carried out in this year are (1) multi-step photoionization spectroscopy of Hg atom by 3-color 3-step ionization scheme, (2) selective photoionization using polarization spectroscopy, (3) design and construction of ion separator chamber, and (4) theoretical study for spectroscopic parameters of mercury. This technology can be applied to several area of nuclear industry such as the utilization of radioactive waste, the development of new materials, high sensitive analysis of heavy atomic elements. (Author)

  9. Nuclear boom - challenge for research and development

    International Nuclear Information System (INIS)

    Korec, M.; Liska, P.

    2009-01-01

    In this lecture authors present research and development in which VUJE, a. s. has participated. Authors concluded that resume as soon as possible the short-term research and development tasks for the existing SE reactors, both, operational reactors of SE and for shut-downed reactors - JAVYS. (Financing with the contribution from the state but major part from the industry). In cooperation with state institutions, regulatory authorities and investor (would-be operator) and supplier (suppliers) define and prepare tasks focused on issues of new-built Generation III reactors (Financing split between the state and industry in accordance with the characteristics of the tasks). Begin preparing tasks for resolving development problems of Generation IV reactors: - Persuade politicians abut the inevitability of state participation in the process, including financing; - Involve in the process institutions that can significantly contribute to the problems resolving (mainly on technical level, but also on organization and potentially financial level); - Prepare international cooperation agreements in this field (based on the existing agreements, preparation of new agreements); - Define technical areas of cooperation (research infrastructure, experimental and development facilities, simulation tools).

  10. Business development - the function, research propositions, and managerial implications

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe

    and executives from high-tech firms and venture capitalists in North America, Asia, and Europe to provide a foundation for future research. Business development is an emerging staff function providing an added level of sophistication to the firms' overall strategic management with interesting performance...... implications. The business development function is typically found in progressive firms especially within high-tech industries, but is argued to become critical for all types of firms across industries wishing to grow and accumulate wealth. Research propositions and managerial implications are discussed....

  11. Development status of liquefied natural gas industry in China

    International Nuclear Information System (INIS)

    Shi Guohua; Jing Youyin; Wang Songling; Zhang Xutao

    2010-01-01

    With the significant economic growth in China, energy related environmental issues become more and more serious. Most of air pollutants are produced by burning coal. In order to achieve a sustainable balance between economic growth and environmental protection, China has been taking measures to expand the role played by natural gas, especially since the beginning of the 21st century. As the liquid form of natural gas, liquefied natural gas (LNG) has also been paid more attention in the country. This paper explores main motives for the fast development of China's LNG industry. An overview of the industry is also described, covering LNG receiving terminals, plants and transportation. Despite a relatively short development history of LNG industry in China, there are many remarkable successes. City-gas supply by LNG is widely applied in many small to medium cities, and LNG vehicles and cold energy utilization are growing rapidly with governmental supports. At the end, the developmental trends of China's LNG industry are introduced. All the discussions show that LNG is strategically important in China's future energy infrastructure. - Research highlights: →Explore main momentums for the fast development of China's LNG industry→Analyze detailedly current states and future prospects of LNG infrastructure in China→Introduce and analyze the wide application of LNG-based gas supply mode in China→Discuss new developmental trends in China's LNG industry

  12. Sustainable Development as Concern for Industrial Companies

    DEFF Research Database (Denmark)

    Bundgaard, Hans

    Today, the industrial company has responsibilities towards the environment, the society, and the owners. From a theoretical base of social theory and social science, this industry research has considered the preconditions for a more proactive industrial response towards sustainability. A new conc...

  13. Identification and Mapping of Readiness of Micro and Small Coffee Industry Cluster Development

    Directory of Open Access Journals (Sweden)

    Lya Aklimawati

    2015-12-01

    Full Text Available Cluster development of micro and small-scaled coffee industry is an effortto improve the economy of community by utilizing local resources. This studywas aimed to identify phase of cluster growth through determinant factors ofindustrial cluster growth; to assess a linkage between economy players in theindustrial cluster; and to identify strength, weakness, opportunity, and threat incoffee industry development. This research was carried out in Sumberwringin,Bondowoso District, East Java. Survey method through direct observation andinterviews were conducted in this study. Data collected included primary andsecondary data. Number of respondents were 25 industry players selected byjudgement sampling method. The data were analyzed by exploratory descriptivewith content analysis method. This research concluded that industrial clusterstudied was still in phase of formation and initiative (embryo and its growthpattern followed Pattern III. Interrelationship between core industries has notbeen established, while linkage between core industries and supporting industrieshad already well-established. Strength and opportunity in coffee industrydevelopment included raw materials availability, market segment growth. Smalland micro enterprises credit facility, supporting facility, and labor availability.Constraints and threat faced by coffee industry included limited market access,in adequate machineries, limited working capital, raw materials quality, inconsistentproduct quality, credit claim, and competitors.

  14. Biopharmaceutical innovation and industrial developments in South Korea, Singapore and Taiwan.

    Science.gov (United States)

    Hsieh, Chee-Ruey; Löfgren, Hans

    2009-05-01

    South Korea, Singapore and Taiwan are well known as export-oriented developmental states which for decades employed industrial policy to target particular industries for government support. In the past fifteen years, these three countries all identified the biopharmaceutical industry as a strategic sector. This article explores, through economic analysis, the rationale for this decision and the strategies chosen for linking into the global bio-economy with the objective of catching up in biopharmaceuticals. The paper identifies three comparative advantages enjoyed by these countries in the biopharma sector: (1) public investments in basic research; (2) private investments in phase 1 clinical trials; and (3) a potentially significant contract research industry managing latter-stage clinical trials. Governments employ a range of industrial policies, consistent with these comparative advantages, to promote the biopharmaceutical industry, including public investment in biomedical hubs, research funding and research and development (R&D) tax credits. We argue that the most important feature of the biopharmaceutical industry in these countries is the dominant role of the public sector. That these countries have made progress in innovative capabilities is illustrated by input measures such as R&D expenditure as share of gross domestic product, number of patents granted and clinical trials, and volume of foreign direct investment. In contrast, output indicators such as approval of new chemical entities suggest that the process of catching up has only just commenced. Pharmaceutical innovation is at the stage of mainly generating inputs to integrated processes controlled by the globally incumbent firms.

  15. Supplementing Resident Research Funding Through a Partnership With Local Industry.

    Science.gov (United States)

    Skube, Steven J; Arsoniadis, Elliot G; Jahansouz, Cyrus; Novitsky, Sherri; Chipman, Jeffrey G

    2018-01-17

    To develop a model for the supplementation of resident research funding through a resident-hosted clinical immersion with local industry. Designated research residents hosted multiple groups of engineers and business professionals from local industry in general surgery-focused clinical immersion weeks. The participants in these week-long programs are educated about general surgery and brought to the operating room to observe a variety of surgeries. This study was performed at the University of Minnesota, in Minneapolis, Minnesota, at a tertiary medical center. Ten designated research residents hosted general surgery immersion programs. Fifty-seven engineers and business professionals from 5 different local biomedical firms have participated in this program. General surgery research residents (in collaboration with the University of Minnesota's Institute for Engineering in Medicine) have hosted 9 clinical immersion programs since starting the collaborative in 2015. Immersion participant response to the experiences was very positive. Two full-time resident research positions can be funded annually through participation in this program. With decreasing funding available for surgical research, particularly resident research, innovative ways to fund resident research are needed. The general surgery clinical immersion program at the University of Minnesota has proven its value as a supplement for resident research funding and may be a sustainable model for the future. Copyright © 2018 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  16. Industrie 4.0 - from the perspective of applied research

    OpenAIRE

    Neugebauer, R.; Hippmann, S.; Leis, M.; Landherr, M.

    2016-01-01

    Industrie 4.0 is the German description for the 4th industrial revolution. While in Germany "Industrie 4.0" aims at putting the strong German manufacturing industry in a position of future readiness through integrated digitization, for the ICT-dominant USA, "Smart Manufacturing" is ought to revive the country's re-industrialization. Fraunhofer, a major European Research and Technology Organization (RTO), has a strong focus on Industrie 4.0 technologies throughout the whole production value ch...

  17. Preservation of nuclear talented experts in Japan by co-operation of industries, research institutes and universities

    International Nuclear Information System (INIS)

    Mori, H.

    2004-01-01

    Full text: Nuclear power accounts for about 35% electric power generation in Japan, playing an important role of energy supply. In addition, a commercial scale reprocessing plant is under construction. A real nuclear fuel cycle is imminently close at hand in Japan. COP3 in Kyoto in 1997 called for every country's fight against global warming. Nuclear power in Japan is expected to take another important role from this viewpoint, too. In order to play these expected roles, it is absolutely needed to preserve nuclear talented experts, by maintaining, succeeding and newly developing nuclear technologies. The Atomic Energy Commission of Japan also points out in its report on 'Long-Term Program for Research, Development and Utilization of Nuclear Energy' that research-and development activities are very important to motivate young researchers and engineers who might choose to take nuclear careers. However, young generation capable students seem to avoid majoring nuclear engineering in view of nuclear industry uncertainties in future caused by stagnated Japanese economy since 1990, liberalization of electricity markets, future electricity demand modest forecasts, matured light water reactor technologies, and repeated nuclear accidents inside and outside the country, etc. Aging research facilities at universities are another de-motivating element of causing the reduction of qualifiable students. Consequently, preservation of knowledge and expertise is becoming a big concern for future. According to the survey conducted by the Japan Atomic Industrial Forum (JAIF) over two years since 2002, participated by the members from nuclear industries, universities, research organizations, electricity industries, nuclear plant suppliers and construction contractors, as well as the questionnaire sent to students, there are various issues for preservation of nuclear talented experts in Japan. Although the number of graduates on nuclear engineering is actually about 350 every year, and

  18. Strategic research on the sustainable development cost of manufacturing industry under the background of carbon allowance and trade policy

    Science.gov (United States)

    Ma, Zhongmin; Cheng, Mengting; Wang, Mei

    2017-08-01

    The important subjects of energy consumption and carbon emission are manufacturing enterprises, with the deepening of international cooperation, and the implementation of carbon limit and trade policy, costs of manufacturing industry will rise sharply. How can the manufacturing industry survive in this reform, and it has to be a problem that the managers of the manufacturing industry need to solve. This paper analyses sustainable development cost connotation and value basis on the basis of sustainable development concept, discusses the influence of carbon allowance and trade policy for cost strategy of manufacturing industry, thinks that manufacturing industry should highlight social responsibility and realize maximization of social value, implement cost strategy the sustainable development, and pointed out the implementation way.

  19. Development of an ergonomics guideline for the furniture manufacturing industry.

    Science.gov (United States)

    Mirka, Gary A

    2005-03-01

    Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

  20. Radiotracer technology as applied to industry. Final report of a co-ordinated research project 1997-2000

    International Nuclear Information System (INIS)

    2001-12-01

    The Co-ordinated Research Project (CRP) on Radiotracer Technology for Engineering Unit Operation Studies and Unit Process Optimization was carried out by the International Atomic Energy Agency (IAEA) from December 1997 until December 2000. The project developed and validated procedures and protocols for investigation of major industrial processes, including fluidized beds, sugar crystallizers, trickle bed reactors, cement rotary kilns, flotation cells, grinding mills, incinerators, wastewater treatment units and interwell communications in oil fields. This publication is the output of the above mentioned CRP. It provides the principles and state of the art of radiotracer methodology and technology as applied to industry and environment. It is expected to provide wider interest for further development of skills and confidence prior to carrying out field work. It facilitates transfer of technology from developed to developing countries and from nuclear research institutions to industrial end users. The publication could be a suitable guide for radiotracer applications in almost all types of process investigations. The case studies described in this publication deal with typical problems in industry and environment common to all countries. It is intended for radiotracer groups as well as for end engineers and managers from chemical and petrochemical industries, mineral ore and raw material processing, wastewater treatment plants, and other industrial sectors

  1. Technology transfer from research and development to European industry

    International Nuclear Information System (INIS)

    Conrads, H.; Theenhaus, R.

    1989-01-01

    This paper gives an overview of technology transfer, i.e. the transfer of knowledge, insights and technologies from research and development to practical application, especially in the Federal Republic of Germany. Some examples and perspectives of technology transfer for nuclear fusion are given. (author). 7 refs.; 5 figs

  2. Review of Researches on Agricultural Industry Chain at Home and Abroad

    Institute of Scientific and Technical Information of China (English)

    Ge; SONG; Taiyan; YANG; Jianhui; LIU

    2014-01-01

    Management of agricultural industry chain is the main form of modern agricultural industrialization. Integration and optimization of agricultural chain have great significance in deepening the reform in the countryside,quickening the development of agricultural modernization and establishing new system of agricultural management. Based on the theory sources and contents of agricultural chain as well as the current researches at home and abroad,this paper hackles and concludes information technology,logistics management and food safety and quality in foreign agricultural chain as well as the organization model,operation mechanism,integration and optimization,promotion and extension,financing and risk prevention,influencing factors as well as performance evaluation in domestic agricultural chain and offers relevant review in order to provide further reference for future researches.

  3. Catalysts development for Venezuelan oil industry

    International Nuclear Information System (INIS)

    1999-01-01

    Since the beginning of technical activities at PDVSA Intevep, Catalysis became a fact. As the technological affiliate of the Venezuelan Oil Industry, its rol in this area has been oriented towards the refining and petrochemical needs of that industry. In doing so, the whole set of activities dealing with basic research, development and consulting has lead to keep in force such a topic along our history. This work describes these activities, the infrastructure which supported it and the most relevant results, both those which have reached commercial level together with those holding that potential through a valid patent. As can be seen, this country relay on a corporation capable of generating catalytic technologies to satisfy its needs, within a wide range of applications. PDVSA Intevep has been exhaustively working with that orientation from the knowledge creation through the technology transfer of our products to the operational units

  4. Aeronautics Education, Research, and Industry Alliance (AERIAL) Progress Report and Proposal for Funding Continuation NASA Nebraska EPSCoR

    Science.gov (United States)

    Bowen, Brent; Fink, Mary; Gogos, George; Moussavi, Massoum; Nickerson, Jocelyn; Rundquist, Donald; Russell, Valerie; Tarry, Scott

    2004-01-01

    The Aeronautics Education, Research, and Industry Alliance (AERIAL), which began as a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, has contributed substantially to the strategic research and technology priorities of NASA, while intensifying Nebraska's rapidly growing aeronautics research and development endeavors. AERIAL has enabled Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. Nebraska has placed emphasis on successfully securing additional funds from non-EPSCoR and non-NASA sources. AERIAL researchers have aggressively pursued additional funding opportunities offered by NASA, industry, and other agencies. This report contains a summary of AERIAL's activities and accomplishments during its first three years of implementation.

  5. Atmospheric fluidized bed coal combustion research, development and application

    CERN Document Server

    Valk, M

    1994-01-01

    The use of fluidized bed coal combustion technology has been developed in the past decade in The Netherlands with a view to expanding the industrial use of coal as an energy supply. Various research groups from universities, institutes for applied science and from boiler industries participated and contributed to this research area. Comprehensive results of such recent experimentation and development work on atmospheric fluidized bed combustion of coal are covered in this volume. Each chapter, written by an expert, treats one specific subject and gives both the theoretical background as well a

  6. Jobs and Skills in Industry 4.0: An Exploratory Research

    OpenAIRE

    Pinzone , Marta; Fantini , Paola; Perini , Stefano; Garavaglia , Stefano; Taisch , Marco; Miragliotta , Giovanni

    2017-01-01

    Part 5: Sustainable Human Integration in Cyber-Physical Systems: The Operator 4.0; International audience; Industry 4.0 is at the center of the current debate among manufacturing leaders, industrial practitioners, policy makers and researchers. Despite the increasing attention paid to changes in jobs and skills generated by Industry 4.0, research in this domain is still scarce. Our study focuses on the evolution of technical skills in the context of Industry 4.0 and it provides qualitative in...

  7. SUSTAINABLE DEVELOPMENT OF INDUSTRIAL ENTERPRISES IN CONDITIONS OF ECONOMIC INSTABILITY

    Directory of Open Access Journals (Sweden)

    M. Ya. Veselovsky

    2015-01-01

    Full Text Available In article the perspective of a sustainable development of the industrial enterprises is investigated, the factors infl uencing stability of development of the enterprises are analyzed, defi nition of different types of economic stability in the period of economic instability is given, internal and external factors of stability of the enterprises are allocated, is underlined that economic stability, first of all, is distinguished from the major factors infl uencing stability of development of the industrial enterprises. At the same time, authors consider factors of the available instability and their infl uence on rates of development of the industrial enterprises. Change of the current situation requires weakening of a number of the factors resulting in economic instability.Purposes. The purpose of article is the analysis of factors of the industrial enterprises infl uencing a sustainable development in the conditions of economic instability and development of the off ers providing on their sustainable development. Article tasks: to investigate and allocate factors, in the conditions of the worsening economic situation which are expedient for considering at a solution of the problem of a sustainable development of the industrial enterprises.Methodology. When carrying out the real research materials of the state statistics were the main sources of basic data. Comparative methods of the analysis are the basis for methodical development.Results. The concept is given and types of economic stability of the industrial enterprises are given. Infl uence of internal and external factors of the enterprises infl uencing stability is shown. Infl uence of an economic situation on a role of these factors is allocated. For achievement of a sustainable development of the industrial enterprises it is off ered to realize measures for weakening of the factors resulting in economic instability.Conclusions / importance. In the conditions of new economic

  8. Industry, university and government partnership to address research, education and human resource challenges for nuclear industry in Canada

    International Nuclear Information System (INIS)

    Mathur, R.M.

    2004-01-01

    Full text: This paper describes the outcome of an important recent initiative of Canadian nuclear industry to reinvigorate interest in education and collaborative research in prominent Canadian universities. This initiative has led to the formation of the University Network of Excellence in Nuclear Engineering (UNENE), incorporated in 2002. During the recent past, the slowdown in nuclear power development in Canada has curtailed the demand for new nuclear professionals down to a trickle. Without exciting job opportunities in sight the interest of prospective students in nuclear education and research has plunged. Consequently, with declining enrolment in nuclear studies and higher demand from competing disciplines, most universities have found it difficult to sustain nuclear programs. As such the available pool of graduating students is small and insufficient to meet emerging industry demand. With nuclear industry employees' average age hovering around mid-forties and practically no younger cohort to back up, nuclear industry faces the risk of knowledge loss and significant difficulty in recruiting new employees to replenish its depleting workforce. It is, therefore, justifiably concerned. Also, since nuclear generation is now the purview of smaller companies, their in-house capability for mid- to longer-term research is becoming inadequate. Recognizing the above challenges, Ontario Power Generation, Bruce Power and Atomic Energy of Canada Limited have formed an alliance with prominent Canadian universities and undertaken to invest money and offer in-kind support to accomplish three main objectives: Reinvigorate university-based nuclear engineering research by augmenting university resources by creating new industry supported research professorships and supporting research of other professors; Promote enrolment in graduate programs by supporting students and making use of a course-based Master of Engineering (M.Eng.) Program that is taught collectively by

  9. Industrial development in Indonesia - key data

    International Nuclear Information System (INIS)

    Gocht, W.

    1993-01-01

    In the case of Indonesia 3 goals in particular were linked to the industrial process: to improve the balance of payments, to reduce unemployment and to develop remote regions. Thus, development plans and official development policy have not adopted merely one strategic approach to industrialization, but have combined several: export diversification, promition of labour-intensive, small-scale and large-scale enterprises, and industrial production linked to basic needs. In 1991 the KfW gave financial support to the following projects: transformer plant and Suralaya, railway investment programme, electricity transmission system Krian-Paiton, supply of 3 ferries, staff development fund III. (BWI) [de

  10. Significance and impact of nuclear research in developing countries

    International Nuclear Information System (INIS)

    1987-01-01

    The main purpose of this conference was to gather representatives of universities, research institutes, governmental agencies and industry, as well as IAEA staff, to report on and to assess the significance and impact of nuclear science and technology in developing countries. Thirty-four papers from 17 countries were presented, which are included in the proceedings, as well as reports of three workshops on ''Basic and applied research'', on ''The IAEA's involvement in the implementation of national nuclear programmes'', and on ''Policy and management issues''. The presentation of these reports clearly reflects the fact that all the nuclear activities involved in the programmes of industrialized countries are in progress in developing countries, i.e. most of the aspects of applications in the field of nuclear power, research reactors, food and agriculture, industry and earth sciences, and life sciences. A separate abstract was prepared for each of these papers

  11. Development of strategic cooperation of higher school and industrial enterprises to promote innovative development

    Directory of Open Access Journals (Sweden)

    A. O. Ermakov

    2016-01-01

    Full Text Available In this article the author analyzes the provisions of the national system of strategic planning of innovation development, of strategic planning documents within the formation of the concept of innovative development of the Russian economy, its transition to the knowledge economy Along with this, the author reviewed the current development indicators of the Russian economy and comparative analysis of world GDP and volumes of financing of scientific development of the countries of the world - the Global Competitiveness Report. The article provides the analysis and decomposition of component Pillar 12. Innovation on the innovative activity in Russia. The author gives the analysis on number of people employed in research and development personnel in the dynamics and by countries. The article presents information on the funding of scientific research in the United States, Japan, Russia, etc. as percentage of GDP and in absolute values. The article shows a consolidated list of used Russia's innovation promotion instruments (subsidies of costs for innovative projects, project financing, etc., taking account of links to documents, implementating these tools. The author considers problems of cooperation of Universities with industry in the establishment of such interaction as a factor of innovative growth in foreign literature. In the conclusion the author formulates a proposal for the intensification of research to improve forms of strategic partnership of universities and industrial enterprises on the basis of experience researchers form eastern countries, the results of applying the introduced tools at the state and regional levels and binding of adapting them to Russian realities and specifics.

  12. Research on the Renewable Energy Industry Financing Efficiency Assessment and Mode Selection

    Directory of Open Access Journals (Sweden)

    Xiaohuan Lyu

    2018-01-01

    Full Text Available In recent years, environmental issues are attracting widespread attention by various countries around the world. In this context, the renewable energy industry has become a stimulus point for economic development and has great potential for development. Renewable energy industry financing is difficult due to its characteristics of high risk and long-term investment returns, and relying on existing financing channels make it present a glut of excess capacity. It is key to realize resource optimal allocation, solve overcapacity phenomenon and select the valid financing mode. This paper used Bloomberg New Energy Finance (BNEF data and the data envelopment analysis (DEA method to analyze the financing efficiency different parts of the global renewable energy industry and different ways of financing. It could be found that although the financing efficiency showed a trend of increasing year by year, the financing efficiency of each industry presented generally weak DEA efficiency, the comprehensive financing efficiency of wind power industry was higher. The article also found that the financing efficiency of project financing and Research and Development (R&D were relatively high, and the equity market and venture capital and private equity were less efficient. The results of this paper play an important role in the overall financing status cognizance of the renewable energy industry and give suggestions about valid financing mode choice.

  13. Fiscal 1998 research report on development of the advanced industrial furnace (R and D on the advanced industrial furnace). Volume 3; 1998 nendo koseino kogyoro no kaihatsu ni kansuru kenkyu seika hokokusho. Koseino kogyoro nado ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the research results of the chapter 4 and 5 (experimental database) from the research report on development of the advanced industrial furnace. The chapter 4 summarizes functions of the temperature performance evaluation simulator of the advanced continuous heating furnace for the database system, and various research results obtained by the simulator. This chapter also summarizes the research result on the applicability of high-temperature air combustion to other industries, the patent research result on heat storage combustion technology, the basic technology research result, and the reaction analysis result by FLUENT. The chapter 5 summarizes the combustion experiment data collection by developing self-completion high-temperature high-radiation heating technology. As for R and D on technology optimizing the profile of heating furnaces, the following data are summarized: measurement data of heat transfer in furnaces and heat flux data at right overhead furnace temperature under cold air and preheated air combustion in conventional furnaces, and heat storage combustion. (NEDO)

  14. University Research and Development Activities: The Federal Income Tax Consequences of Research Contracts, Research Subsidiaries and Joint Ventures.

    Science.gov (United States)

    Kertz, Consuelo Lauda; Hasson, James K., Jr.

    1986-01-01

    Features of the federal income tax law applying to income received from commercially funded university-based scientific research and development activities are discussed, including: industry-sponsored research contracts, separately incorporated entities, partnerships and joint ventures, subsidiaries and unrelated income consequences of…

  15. [Eco-economic thinking for developing carbon sink industry in the de-farming regions].

    Science.gov (United States)

    Wang, Ji Jun; Wang, Zheng Shu; Cheng, Si Min; Gu, Wen; Li, Yue; Li, Mao Sen

    2017-12-01

    Based on the potential and the law that plants absorb carbon dioxide, carbon sink industry means certain appropriate artificial intervention to obtain clean air, and to meet people's production and life demand for ecological environment industry. Carbon sink industry is considered as a breakthrough point and a new growth point for optimizing and upgrading of the original relatively balanced or stable agricultural industry-resources system. Among the ecosystem services in the de-farming regions, the rapid increase of the economic manifestation of carbon fixation and oxygen release function and the carbon sink potential, as well as the rise of carbon trading and carbon market both in domestic and international, have established a theoretical and practical basis for the deve-lopment of carbon industry. With the development of the carbon sink industry, improving the carbon sequestration output will become the core of the carbon sink industry. The producers or marketers will form the controlling of the carbon source, the development of the path for carbon storage increasing and re-layout of agricultural industry-resources structure, and thus bring new vitality to regional sustainable development in the de-farming regions. This indicates the emphasis for the future research and development, that is, allocating the agricultural industry-resources structure and their benign coupling mechanism after integrating the carbon sink industry.

  16. An exploratory study on the determinants of performance in regional industry technology development programs

    Directory of Open Access Journals (Sweden)

    Choo-Hui Park

    2017-08-01

    Full Text Available Purpose - The purpose of this paper is to analyze the determinants of the performance of regional industrial technology development programs among the regional strategic industrial development program that the central government and Daegu metropolitan city jointly promoted between 2004 and 2012. Specifically, in this research, the authors are trying to identify the effects of R&D capabilities and technical development tasks on technological and managerial performance. Design/methodology/approach - The dependent variables of this study are technical and economic performance. Technical performance, product and process innovation, economic performance, sales and export increases were measured using five-point Likert scales. The authors added the contribution of sales through technology development to economic performance. The independent variable is the company’s R&D capability, measured by the number of R&D staff compared to the average total number of employees from 2004 to 2012. The characteristics of the technology development tasks were measured by technical characteristics, market characteristics and collaborative research types. The technological characteristics were measured by seven factors, including technological change, technical difficulty, potential in commercialization, competition between domestic and foreign competitors, difficulty in introducing overseas technology and the technological gap. Market characteristics were largely divided into complexity, dynamics and competitiveness. The types of collaborative research were divided into whether or not there were collaborative research with the participation of large corporations. The control variables are firm size (number of employees and firm age. Regression analysis was used to analyze the determinants of performance, and a difference analysis was conducted to determine the effect of collaborative research on performance. Findings - The main determinants of the regional

  17. Sustainable Development of Geothermal Industry in China: An Overview

    OpenAIRE

    Xu Bang; Li Menggang; Pi Xiyu

    2016-01-01

    With a wide distribution, large reserves, low cost, sustainable energy use and environmental protection and other unparalleled advantages, geothermal energy resources is important for China’s energy structure adjustment, energy conservation and environment improvement. Currently, geothermal utilization in China is still in its infancy, and Sustainable Development of the geothermal industry is also having a lot of problems. In this paper, the current research on sustainable development of geot...

  18. Technical development of industry for 30 years

    International Nuclear Information System (INIS)

    2009-01-01

    This book mentions the history for 30 years since 1979 on industrial technology, which records change of system and environment of industrial technology development, like economical and social environment, industrial technology policy, support system on technical development and enterprise institute, assignment for future and product of industrial technology by field such as electric electronic, information and communications, machine material and fiber chemistry, and the way which Korea industrial technology association walked on.

  19. Assessing consumer responses to potential reduced-exposure tobacco products: a review of tobacco industry and independent research methods.

    Science.gov (United States)

    Rees, Vaughan W; Kreslake, Jennifer M; Cummings, K Michael; O'Connor, Richard J; Hatsukami, Dorothy K; Parascandola, Mark; Shields, Peter G; Connolly, Gregory N

    2009-12-01

    Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing consumer response, and consider how these methods might be applied to evaluate potentially reduced exposure tobacco products and new products. Internal industry research reviewed included published articles, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. A model that conceptualizes consumer response as comprising the separate, but interacting, domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of potentially reduced-exposure tobacco products and new products, to counteract tobacco industry influence on consumers, and enhance the public health.

  20. A recommended program of tritium monitoring research and development

    International Nuclear Information System (INIS)

    Nickerson, S.B.; Gerdingh, R.F.; Penfold, K.

    1982-10-01

    This report presents recommendations for programs of research and development in tritium monitoring instrumentation. These recommendations, if implemented, will offer Canadian industry the opportunity to develop marketable instruments. The major recommendations are to assist in the development and promotion of two Chalk River Nuclear Laboratories' monitors and an Ontario Hydro monitor, and to support research and development of a surface monitor

  1. Participatory ergonomics intervention in an industrially developing country--a case study.

    Science.gov (United States)

    Helali, Faramarz; Lönnroth, Emma-Christin; Shahnavaz, Houshang

    2008-01-01

    In industrially developing countries, a few ergonomists have directed great efforts towards developing ergonomics awareness among managers and workers in organizations. There is little research on the degree of their success, though. Furthermore, access of organizations to ergonomics knowledge is usually very difficult, especially in industrially developing countries. Thus, building ergonomics awareness is certainly the first phase of the process. Three companies from one industry (44 people: 14 females and 30 males) participated in a project aimed at improving their work system. At the beginning, we needed to create a common goal and ensure participation with appropriate ergonomics tools. The findings of this study were the key issue for the ergonomics intervention (i.e., a shared vision, awakened need of change and learning). Further, to build ergonomics awareness and develop a continuous learning process in the company, it was necessary to use more ergonomics tools through workers' participation in different workplaces.

  2. Research and development project in fiscal 1990 for large industrial technologies. Achievement report on research and development of ultra-advanced processing systems (Research and development of ultra-advanced processing systems); 1990 nendo chosentan kako system no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    Research and development has been performed with an objective to establish the processing technology using excitation beam required for the advanced industries, and the ultra-precision machining technology to realize the nano-technology. This paper summarizes the achievements in fiscal 1990. In the research on the ultra-precision machining elements, experimental discussions were given on positioning and movement characteristics of static pressure feed screws in an NC equipment, wherein the intermediate target was achieved on rigidity improvement in rotating devices and accuracy in the ultra-precision positioning device. In the research on the thin film forming and laminating technology, a low temperature forming method was completed to form a diamond film at temperatures lower than 400 degrees C on such a substrate as aluminum. In the research of the ion beam surface modifying technology, researches were performed to laminate a silicon nitride layer and a phosphoric glass layer on the glass surface layer, having obtained a result that the modification can be executed in 57 minutes. A method was established to evaluate performance of Si films by measuring movement characteristics of an Si thin film transistor formed on the modified substrate, having achieved the intermediate target. (NEDO)

  3. Development of the production of special steels for nuclear industries

    International Nuclear Information System (INIS)

    Vieillard-Baron, B.

    1977-01-01

    The development of electro-nuclear industries has a powerful impact on the production of special steels, although the quantity of material applied to the non-conventional parts of nuclear power plants is quite small as compared to the total production requirements in this industrial field. Evolution bears on the product research, development and testing methods, on the technical and marketing services - in particular the establishment of quality control teams and assurance manuals - and the implementation of high performance production equipments. Manufacturing must however take place under normal work load and productivity conditions of production tools, and thus ensure a satisfactory profitability on investments entailed [fr

  4. Differing Perceptions Concerning Research Integrity Between Universities and Industry: A Qualitative Study.

    Science.gov (United States)

    Godecharle, Simon; Nemery, Benoit; Dierickx, Kris

    2017-09-14

    Despite the ever increasing collaboration between industry and universities, the previous empirical studies on research integrity and misconduct excluded participants of biomedical industry. Hence, there is a lack of empirical data on how research managers and biomedical researchers active in industry perceive the issues of research integrity and misconduct, and whether or not their perspectives differ from those of researchers and research managers active in universities. If various standards concerning research integrity and misconduct are upheld between industry and universities, this might undermine research collaborations. Therefore we performed a qualitative study by conducting 22 semi-structured interviews in order to investigate and compare the perspectives and attitudes concerning the issues of research integrity and misconduct of research managers and biomedical researchers active in industry and universities. Our study showed clear discrepancies between both groups. Diverse strategies in order to manage research misconduct and to stimulate research integrity were observed. Different definitions of research misconduct were given, indicating that similar actions are judged heterogeneously. There were also differences at an individual level, whether the interviewees were active in industry or universities. Overall, the management of research integrity proves to be a difficult exercise, due to many diverse perspectives on several essential elements connected to research integrity and misconduct. A management policy that is not in line with the vision of the biomedical researchers and research managers is at risk of being inefficient.

  5. The Haendeloe area in Norrkoeping, Sweden: Does it fit for Industrial Symbiosis development?

    Energy Technology Data Exchange (ETDEWEB)

    Hatefipour, Saeid; Baas, Leenard; Eklund, Mats (Div. of Environmental Technology and Management - Dept. of Management and Engineering, Linkoeping Univ., Linkoeping (Sweden)), e-mail: saeid.hatefipour@liu.se

    2011-06-15

    Today, sustainable cities/regions are playing an important role in sustainable development projects. The overall aim of the current paper is to demonstrate an Industrial Symbiosis development in the Haendeloe area of Norrkoeping city in the Oestergoetland county of Sweden. It is part of a research program called 'Sustainable Norrkoeping' focusing on developing links between the industrial and the urban part of the city. As analysis of the current situation is important for understanding the future development, the paper tries to map the current industrial symbiosis links and symbiotic network to identify potentials exist. To achieve this, paper gives a general view of how this area has been developed, constructed, and grown. The next stage is devoted to an inventory of different actors, stakeholders, and companies, their processes and relationships in the form of energy, materials and by-products exchanges, flows and streams into and out of the Haendeloe area considering the Haendeloe/Norrkoeping as system boundaries. In addition, by describing different tools, elements and approaches of industrial symbiosis and considering and applying two main key tools as industrial inventories and input/output matching the paper also tries to show that whether the already industrial activities formed inside the Haendeloe fits for an industrial symbiosis development

  6. The industrial development of atomic energy

    International Nuclear Information System (INIS)

    Kowarski, L.

    1955-01-01

    Countries with large stock of fissile material and producing large quantity of nuclear pure 235 U and 239 Pu are able to allocate part of the stock to non military research. For countries with low stock of fissile material, all the stock is allocated to military research. An economical and technical solution has to be find to dedicate a part of fissile material to non military research and develop the atomic energy industry. It stated the industrial and economical problems and in particular the choice between the use of enriched fuel with high refining cost or depleted fuel with low production cost. It discusses of four possible utilizations of the natural resources: reactors functioning with pure fissile material ( 235 U or 239 Pu) or concentrated material ( 235 U mixed with small quantities of 238 U after an incomplete isotopic separation), breeder reactors functioning with enriched material mixed with 238 U or Thorium placed in an appropriate spatial distribution to allow neutrons beam to activate 238 U or Thorium with the regeneration of fissile material in 239 Pu, reactors using natural uranium or low enriched uranium can also produce Plutonium with less efficiency than breeder reactors and the last solution being the use of natural uranium with the only scope of energy production and no production of secondary fissile material. The first class using pure fissile material has a low energy efficiency and is used only by large fissile material stock countries to accumulate energy in small size fuel for nuclear engines researches for submarines and warships. The advantage of the second class of reactors, breeder reactors, is that they produce energy and plutonium. Two type of breeder reactor are considered: breeder reactor using pure fissile material and 238 U or breeder reactor using the promising mixture of pure fissile material and Thorium. Different projects are in phase of development in United States, England and Scotland. The third class of reactor using

  7. Towards preventative eco-industrial development: an industrial and urban symbiosis case in one typical industrial city in China

    DEFF Research Database (Denmark)

    Dong, Liang; Fujita, Tsuyoshi; Dai, Ming

    2016-01-01

    situation. In order to investigate the eco-benefits of eco-industrial development in China, this study focused on an industrial and urban symbiosis case of Guiyang city in which process synergy, municipal solid wastes recycling and waste energy utilization were incorporated in this typical industrial city...... policy implications to address the barriers of promoting industrial and urban symbiosis were proposed. This study is critical for future industrial and urban planning policy making and shed a light on innovative eco-industrial development in China....

  8. New Product Development (NPD) Process - An Example of Industrial Sector

    Science.gov (United States)

    Kazimierska, Marianna; Grębosz-Krawczyk, Magdalena

    2017-12-01

    This aim of this article is to present the process of new product introduction on example of industrial sector in context of new product development (NPD) concept. In the article, the concept of new product development is discussed and the different stages of the process of new electric motor development are analysed taking into account its objectives, implemented procedures, functions and responsibilities division. In the article, information from secondary sources and the results of empirical research - conducted in an international manufacturing company - are used. The research results show the significance of project leader and regular cooperation with final client in the NPD process.

  9. Risk Management for New Product Development Projects in Food Industry

    Directory of Open Access Journals (Sweden)

    Porananond, D.

    2014-07-01

    Full Text Available Project risk management provides a guideline for decision making in new product development (NPD projects, reducing uncertainty and increasing success rate. However, the acceptance of formal risk management applications in industry, especially for NPD projects is still in question. A study of a food conglomerate in Thailand found that only 9% of NPD projects used a systematic approach for managing risk. 61% of the projects realised the importance of risk management, while the remaining 30% did not involve risk management at all. This study aims to develop a risk management model for NPD projects in the food industry. The first section of this paper reviews the literature on risk management theory, including international standards for risk and project management (ISO31000 and ISO21500, publications for the Project Management Body of Knowledge (PMBOK, by a professional organisation the Project Management Institute (PMI, and also academic research. 182 academic papers, published between January 2002 and August 2012 were selected. The second part interviews conducted with eight NPD experts from five of the major food manufacturers in Thailand to examine their risk management practices and problems. Conclusions are made on five topics : classification of research method, project type and industrial segment, distribution of articles by region, tools & techniques for risk management and risk factors in projects. Specific requirements of risk management for NPD projects in the food industry are identified. A risk management model and the concept of risk management applications for the food industry are proposed.

  10. Chaos theory perspective for industry clusters development

    Science.gov (United States)

    Yu, Haiying; Jiang, Minghui; Li, Chengzhang

    2016-03-01

    Industry clusters have outperformed in economic development in most developing countries. The contributions of industrial clusters have been recognized as promotion of regional business and the alleviation of economic and social costs. It is no doubt globalization is rendering clusters in accelerating the competitiveness of economic activities. In accordance, many ideas and concepts involve in illustrating evolution tendency, stimulating the clusters development, meanwhile, avoiding industrial clusters recession. The term chaos theory is introduced to explain inherent relationship of features within industry clusters. A preferred life cycle approach is proposed for industrial cluster recessive theory analysis. Lyapunov exponents and Wolf model are presented for chaotic identification and examination. A case study of Tianjin, China has verified the model effectiveness. The investigations indicate that the approaches outperform in explaining chaos properties in industrial clusters, which demonstrates industrial clusters evolution, solves empirical issues and generates corresponding strategies.

  11. A novel approach to enhance food safety: industry-academia-government partnership for applied research.

    Science.gov (United States)

    Osterholm, Michael T; Ostrowsky, Julie; Farrar, Jeff A; Gravani, Robert B; Tauxe, Robert V; Buchanan, Robert L; Hedberg, Craig W

    2009-07-01

    An independent collaborative approach was developed for stimulating research on high-priority food safety issues. The Fresh Express Produce Safety Research Initiative was launched in 2007 with $2 million in unrestricted funds from industry and independent direction and oversight from a scientific advisory panel consisting of nationally recognized food safety experts from academia and government agencies. The program had two main objectives: (i) to fund rigorous, innovative, and multidisciplinary research addressing the safety of lettuce, spinach, and other leafy greens and (ii) to share research findings as widely and quickly as possible to support the development of advanced safeguards within the fresh-cut produce industry. Sixty-five proposals were submitted in response to a publicly announced request for proposals and were competitively evaluated. Nine research projects were funded to examine underlying factors involved in Escherichia coli O157:H7 contamination of lettuce, spinach, and other leafy greens and potential strategies for preventing the spread of foodborne pathogens. Results of the studies, published in the Journal of Food Protection, help to identify promising directions for future research into potential sources and entry points of contamination and specific factors associated with harvesting, processing, transporting, and storing produce that allow contaminants to persist and proliferate. The program provides a model for leveraging the strengths of industry, academia, and government to address high-priority issues quickly and directly through applied research. This model can be productively extended to other pathogens and other leafy and nonleafy produce.

  12. Developing business strategies using SWOT analysis in a color crackers industry

    Science.gov (United States)

    Budiman, I.; Tarigan, U. P. P.; Mardhatillah, A.; Sembiring, A. C.; Teddy, W.

    2018-04-01

    This research was conducted in color crackers industry in Indonesia. Color crackers are snacks colored in red and white, found as additional in many Indonesian traditional foods. The used traditional business strategies are not appropriate for the market condition in the industrial 4.0 era. The aim of this study is to develop business strategies in this market condition. This research was conducted in several steps using SWOT Analysis, weighting assessment for SWOT questions, Internal Factor Analysis Summary, External Factor Analysis Summary, and Creating SWOT Matrix. Data were collected through interviews and questionnaires with internal and external stakeholders. The result of this research is the business positioned in the first quadrant. This gives the explanation that the traditional strategies used already inappropriate with the current condition. They need to use mixed SO (Strength – Opportunity) strategies or called as the aggressive strategy to win the market competition. The developed SO strategies are: creating distribution network with the customers and utilizing renewable technology.

  13. Development of Bulk Nanocrystalline Cemented Tungsten Carbide for Industrial Applicaitons

    Energy Technology Data Exchange (ETDEWEB)

    Z. Zak Fang, H. Y. Sohn

    2009-03-10

    This report contains detailed information of the research program entitled "Development of Bulk Nanocrystalline Cemented Tungsten Carbide Materials for Industrial Applications". The report include the processes that were developed for producing nanosized WC/Co composite powders, and an ultrahigh pressure rapid hot consolidation process for sintering of nanosized powders. The mechanical properties of consolidated materials using the nanosized powders are also reported.

  14. Applications of synchrotron X-rays in microelectronics industry research

    International Nuclear Information System (INIS)

    Jordan-Sweet, Jean L.; Detavernier, Christophe; Lavoie, Christian; Mooney, Patricia M.; Toney, Michael F.

    2005-01-01

    The high flux and density of X-rays produced at synchrotrons provide the microelectronics industry with a powerful probe of the structure and behavior of a wide array of solid materials that are being developed for use in devices of the future. They also are of great use in determining why currently-used materials and processes sometimes fail. This paper describes the X20 X-ray beamline facility operated by IBM at the National Synchrotron Light Source, and presents a series of three industry challenges and results that illustrate the variety of techniques used and problems addressed. The value of this research ranges from solving short-term, technically specific problems to increasing our academic understanding of materials in general. Techniques discussed include high-resolution diffraction, time-resolved diffraction, texture measurements, and grazing-incidence diffraction

  15. Impact of design research on industrial practice tools, technology, and training

    CERN Document Server

    Lindemann, Udo

    2016-01-01

    Showcasing exemplars of how various aspects of design research were successfully transitioned into and influenced, design practice, this book features chapters written by eminent international researchers and practitioners from industry on the Impact of Design Research on Industrial Practice. Chapters written by internationally acclaimed researchers of design analyse the findings (guidelines, methods and tools), technologies/products and educational approaches that have been transferred as tools, technologies and people to transform industrial practice of engineering design, whilst the chapters that are written by industrial practitioners describe their experience of how various tools, technologies and training impacted design practice. The main benefit of this book, for educators, researchers and practitioners in (engineering) design, will be access to a comprehensive coverage of case studies of successful transfer of outcomes of design research into practice; as well as guidelines and platforms for successf...

  16. Development, transition and globalization in China's coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Rui, H.C. [University of Cambridge, Cambridge (United Kingdom)

    2005-07-01

    The coal industry has proved to be one of the most strategically important but also one of the most problematic industries in China. Closing small township and village owned (TVE) coalmines, declaring loss-making state-owned (SOE) mines bankrupt, and building up modern coal corporations are all causing huge difficulties for the government. The main reason for the problems now facing the industry is the fact that TVEs, SOEs and coal corporations were encouraged to meet different needs at different times and now all face different challenges from development, transition and globalization. This article uses research from the three major categories of coal companies in China to demonstrate that, while these three parallel challenges do necessitate reform in the industry, this reform must be handled cautiously, innovatively and in a balanced way.

  17. Improving the Management of Innovative Development of Industrial Production According to Industry Specifics

    Directory of Open Access Journals (Sweden)

    Papizh Yuliia S.

    2018-03-01

    Full Text Available The problem of improvement of management efficiency of innovative development of industrial enterprises in modern economic conditions is indicated. The dynamics of innovative processes in Ukraine together with volumes of innovative activity of domestic enterprises are analyzed. The basic principles of formation and efficient functioning of the organizational-economic mechanism of innovative development of industrial production are substantiated. The branch specificity in management of innovative development of coal enterprises is identified. Directions of improvement of the organizational-economic mechanism of management of innovative development of enterprises of coal industry are defined. The basic principles of introduction of the mechanism for stimulation of innovative development of enterprises of coal industry are suggested.

  18. Research report of innovation of industrial technology in FY 1996; 1996 nendo sangyo gijutsu no innovation chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Remarkable innovations of the Japanese industry in various fields have been extracted and evaluated during the 50 post-war years. In this report, a method of capturing the innovations of industrial technology is examined. It is essential to clarify the social role of industrial technology, and the original views of this research are indicated by focusing on the innovation process in order to clarify the connections between those of mutual industry, technical management, man-power, and unique Japanese technology. The innovations achieved by the Japanese industry during post-war 50 years are classified into eight categories, i.e., automobiles, iron, aero-space/railways, machines, national land/energy, chemicals/fine ceramics, electronics/information/communication, and life, to clarify the technological progress in each field. In Japan, the industrial technology has been developed with learning from fundamental researches in Europe and the USA. In the future, it is necessary to independently develop industrial frontier. 4 figs., 47 tabs.

  19. 75 FR 45130 - Guidance for Industry and Researchers on the Radioactive Drug Research Committee: Human Research...

    Science.gov (United States)

    2010-08-02

    ... and Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 51, rm. 2201, Silver... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2009-D-0125] Guidance for Industry and Researchers on the Radioactive Drug Research Committee: Human Research Without an...

  20. Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges

    Science.gov (United States)

    Chen, Yuanfang; Lee, Gyu Myoung; Shu, Lei; Crespi, Noel

    2016-01-01

    The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases) is an important research issue in the industrial applications of the Internet of Things (IoT). An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices) dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI) framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well. PMID:26861345

  1. Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges.

    Science.gov (United States)

    Chen, Yuanfang; Lee, Gyu Myoung; Shu, Lei; Crespi, Noel

    2016-02-06

    The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases) is an important research issue in the industrial applications of the Internet of Things (IoT). An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices) dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI) framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well.

  2. Industrial Internet of Things-Based Collaborative Sensing Intelligence: Framework and Research Challenges

    Directory of Open Access Journals (Sweden)

    Yuanfang Chen

    2016-02-01

    Full Text Available The development of an efficient and cost-effective solution to solve a complex problem (e.g., dynamic detection of toxic gases is an important research issue in the industrial applications of the Internet of Things (IoT. An industrial intelligent ecosystem enables the collection of massive data from the various devices (e.g., sensor-embedded wireless devices dynamically collaborating with humans. Effectively collaborative analytics based on the collected massive data from humans and devices is quite essential to improve the efficiency of industrial production/service. In this study, we propose a collaborative sensing intelligence (CSI framework, combining collaborative intelligence and industrial sensing intelligence. The proposed CSI facilitates the cooperativity of analytics with integrating massive spatio-temporal data from different sources and time points. To deploy the CSI for achieving intelligent and efficient industrial production/service, the key challenges and open issues are discussed, as well.

  3. Relationship Marketing Stage of Development in Romanian Banking Industry

    Directory of Open Access Journals (Sweden)

    Alina Filip

    2016-02-01

    Full Text Available The paper emphasizes the relationship marketing stage of development within the banking industry in Romania, by identifying the extent to which business objectives and marketing strategies of companies are customer oriented. In order to achieve this aim a qualitative marketing research was conducted, by applying in-depth semi-structured interviews. The target group of the research consisted of nine banking companies, selected according to the market share, while the research participants were employees responsible for marketing, sales and customer relationship management activities. Due to respondents’ expertise, during the interviews could be applied mixed research methods in the process of data collection and subsequently, in data analysis. According to research objectives and results, although there is an increase in the importance of customer orientation within banking policies, the integration of relationship marketing optics at the institutional management level is facing a number of deficiencies, especially with regard to the concerns about employees’ satisfaction and loyalty or to the development of relationships with other stakeholders. The degree of satisfaction with the adoption of customer relationship management technology is relatively high among banks, being appreciated mainly those banking performance achieved in terms of retention rate, cross-selling and customer satisfaction. Most banks use the gross customer retention index as the main indicator of customer portfolio stability, although retention objectives tend to be set differently depending on customer value. Internal marketing strategies are developed around staff training processes, while performance evaluation criteria are rather specific to a transactional marketing approach. Results of the research provide clues on the relationship marketing processes and activities that need to be improved, in order to strengthen the current customer base and the competitive

  4. An action research study of a leadership development programme in the hotel industry

    OpenAIRE

    Cooke, Hilary

    2016-01-01

    Many organisations view leadership as a feature of competitive advantage and competent leaders as instrumental in achieving organisational performance and productivity. \\ud \\ud In the hotel industry, there is a strong relationship between leadership culture and leader behaviour with employee satisfaction, loyalty, and productivity that has a subsequent impact on service quality, profitability and growth. Consequently, many hospitality organisations invest significantly in the development of t...

  5. Sustainable development and the mineral industry

    International Nuclear Information System (INIS)

    Cain, D.

    2000-01-01

    There is a perception in some quarters that the continued development of the coal and minerals industries is incompatible with sustainability. Yet a future without mining is clearly a very long way off. This article outlines some of the initiatives being taken by the coal industry to overcome the adverse perceptions and demonstrate that coal has an important future to play. Industries in the future will be assessed not only on their economic performance, as in the past, but also on their environmental and social performance - that is, their contribution to sustainable development. In this context, sustainable development is now part of mainstream business thinking in many major corporations. Apart from identifying improvement opportunities, the process should also result in a better understanding of mining industry role by non-mining stake holders. Copyright (2000) CSIRO Energy Technology and Exploration and Mining

  6. Research proposal: Industry convergence - Driving forces, factors and consequences

    OpenAIRE

    Weaver, Benjamin

    2007-01-01

    Industry convergence – the merger of hitherto separate industries – is a phenomenon that has had a profound effect on several industries and received considerable interest among practitioners and business press over the past decades. Despite this, industry con- vergence has only received limited attention from the academic management field, al- though an emergent discussion on convergence can be identified. Prior research is limited by a lack of coherent theoretical definitions of convergence...

  7. An Evaluation Model for Sustainable Development of China’s Textile Industry: An Empirical Study

    Science.gov (United States)

    Zhao, Hong; Lu, Xiaodong; Yu, Ting; Yin, Yanbin

    2018-04-01

    With economy’s continuous rapid growth, textile industry is required to search for new rules and adjust strategies in order to optimize industrial structure and rationalize social spending. The sustainable development of China’s textile industry is a comprehensive research subject. This study analyzed the status of China’s textile industry and constructed the evaluation model based on the economical, ecologic, and social benefits. Analytic Hierarchy Process (AHP) and Data Envelopment Analysis (DEA) were used for an empirical study of textile industry. The result of evaluation model suggested that the status of the textile industry has become the major problems in the sustainable development of China’s textile industry. It’s nearly impossible to integrate into the global economy if no measures are taken. The enterprises concerned with the textile industry status should be reformed in terms of product design, raw material selection, technological reform, technological progress, and management, in accordance with the ideas and requirements of sustainable development. The results of this study are benefit for 1) discover the main elements restricting the industry’s sustainable development; 2) seek for corresponding solutions for policy formulation and implementation of textile industry; 3) provide references for enterprises’ development transformation in strategic deployment, fund allocation, and personnel assignment.

  8. Industrial science and technology research and development institutions in fiscal 1999. Report on achievements in research and development of human media; 1999 nendo sangyo kagaku gijutsu kenkyu kaihatsu seido. Human media no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to give the society with the full picture of human media at an early time, actual problems in industries were taken up. This paper summarizes the sensitivity agent to support sensitivity of individuals, the human media database, the urban environment human media aiming at symbiosis of nature with artificial environment, and the achievements of comprehensive investigations and researches in fiscals 1999 and 2000. Activities were taken in the following four areas: 1) research and development of the sensitivity agent and human media database, 2) research and development of the urban environment human media, 3) comprehensive investigations and researches, and 4) investigations on technological trends in foreign countries. In Item 1), discussions were given on the technology to present full-color images at high accuracy, the image sensitivity retrieval technology, and the multi-dimensional interface technology for the human media database. In studying the basic human media technology, discussions were given on the basic sensitivity modeling technology, and the sensitivity agent mechanism. (NEDO)

  9. On the programme of research development in the exclave region

    Directory of Open Access Journals (Sweden)

    Bilchak Vasily

    2011-06-01

    Full Text Available This article focuses on the development of research in the exclave region. The authors offer a programme of research development in the Kaliningrad region. The article describes the principal lines of implementation of priorities of modernization and technological upgrade of regional industries.

  10. Current status and future perspectives of research and development cooperation between utilities, research institutions and universities in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Sekine, Yasuji [Central Research Inst. of Electric Power Industry (CRIEPI), Tokyo (Japan)

    1994-12-31

    This paper presents the research and development activity in the field of electric power production, transmission and distribution in Japan. Organizations participating in the research and development are described with emphasis on theirs roles and cooperation between them. Next described are the R and D subjects and projects carried out by respective organizations. The needs and motivations of respective R and D programs are reviewed briefly together with the financial and human resources put into implementation. The R and D activities in the electric power industry are compared with those in other industrial sectors such as automobile, steel, telecommunication, etc. Mainly in terms of R and D fund. A similar comparison is made with the electric power industry in countries other than Japan. Importance of the international cooperation in stressed for further development of electric power industry and economic progress worldwide. (author) 4 figs., 9 tabs.

  11. Strategy and business development practices in Danish constrution industry SMEs

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff; Koch, Christian; Nielsen, Jesper Salling

    2010-01-01

    practices. 19 qualitative interviews have been conducted in total representing architects, engineering companies, contractors and subcontractors. Based on an in-depth analysis of this empirical material, the study finds: (1) he market is characterized by a typical “red ocean” environment, where...... the companies compete on their overhead rather than their ability to reduce production cost and create value. (2) the companies have a reactive practice towards development, where they try to follow the development in the market rather than shaping their own market. (3) their approach towards strategy...... development represents an important but unacknowledged practice for innovation of the building industry and suggests that strategy processes should be facilitated and subject to more detailed research in order to escape the present unhealthy market practices in the construction industry....

  12. Industry-funded dermatologic research within academia in the United States: fiscal and ethical considerations.

    Science.gov (United States)

    Blank, I H

    1992-03-01

    Private-sector funding of biomedical research within academia may come from industry, foundations, the dermatologists themselves, and the public at large. Industry-funding is of benefit to both academia and industry. Industry may fund clinical and basic research and product testing. Industry is more willing to fund product testing and clinical research than basic research. Funds for dermatologic research may be obtained from manufacturers of drugs, medical devices, cosmetics, soaps, and detergents. Questions of academic freedom arise when research is funded by industry. The results of academic research are in the public domain; the results of intramural industry research are often proprietary, i.e., "trade secrets." When there is industry funding within academia, any restraints on publication should be held to a minimum and be temporary. Publication should occur in a timely fashion, although recognizing the need for delayed publication if the results concern patentable material. When there is a consultantship, pre-arranged terms of agreement may restrict communication. Patents usually are held by the investigator's institution. The funding company may be granted world-wide, royalty-bearing licenses. Conflicts of interest may arise during any research endeavor; this warrants close attention when the research is industry funded. Stock ownership, speaker fees, blind contracts, etc., should be avoided. In any communication, funding agreements should be stated. Indirect costs are a "necessary evil." There are non-research expenditures associated with all research projects for which the institution is justified in requesting compensation. Indirect costs must have definite connections to a project. As industrial funding of research within academia increases, various facets of the academia-industry relationship are receiving increasing attention. Several aspects of conflicts of interest and indirect costs must yet be resolved. When faced openly and directly, all of these

  13. Creative Research: The Theory and Practice of Research for the Creative Industries

    NARCIS (Netherlands)

    Kathryn Best

    2011-01-01

    When conducting research in and for the creative industries, there are a wealth of different possible research approaches that can be taken - reflecting the diverse nature of the disciplines (design, arts and crafts, advertising, architecture, fashion, film, music, TV, radio performing arts,

  14. Technological Competitiveness of Ukraine under Conditions of a New Industrial Revolution and Development of Convergent Technologies

    Directory of Open Access Journals (Sweden)

    Matyushenko Igor Yu.

    2016-02-01

    Full Text Available The article considers the problem of increasing the technological competitiveness of Ukrainian enterprises under conditions of a new industrial revolution through the development and introduction of advanced converged technologies. The classification of industrial revolutions, namely, industrial, technological, information and Industry 4.0, is presented, and it has been determined that the key factor of the latter is cyber physical systems for introduction of the client-oriented “Internet of Things”. It has been justified that the formation of Industry 4.0 in developed countries will occur through advanced production technologies (APT, which main characteristics are technological substitution, automation, customization, localization and economic efficiency. It has been found that in 2020 the main priority APT will be: systems of production process control; multidimensional modeling of complex products; intelligent production systems and robotics; systems of creation and transformation (growing of material objects and 3D-printing; materials effective in creating perspective actuating devices (compositional and those that exhibit their properties in small-size structures. It has been proved that the recovery of Ukraine’s industry is not possible on the old industrial base, and the creation of a new industry based on APT of Industry 4.0 is possible in the following areas: ICT (primarily in the field of software development; new composite materials with specified properties; industrial nanobiotechnologies (biomedicine and pharmacy, new agricultural technologies; mathematical modeling for creation of intelligent production systems; space research and development (in particular, development of the first stages of heavy missiles. The necessity of elaborating state programs of competitiveness development on the basis of APT, foresight research oftechnology priorities, promoting high-tech exports in Ukraine has been substantiated.

  15. Sustaining the emerging carbon trading industry development: A business ecosystem approach of carbon traders

    International Nuclear Information System (INIS)

    Hu, Guangyu; Rong, Ke; Shi, Yongjiang; Yu, Jing

    2014-01-01

    This paper explores how carbon traders nurture the business ecosystem to sustain the emerging carbon trading industry development. We collected primary data from a multinational carbon trader and its ecosystem partners in China, through the construction of interviews and documentary. The research findings show the carbon trading industry has experienced four-stage evolution with different driving forces; the carbon trader attracted and organized ecosystem partners to facilitate the CDM project owners to create carbon credits and trade them; a systematic business ecosystems approach through the lens of Context, Cooperation and Configuration, initiated by carbon traders, has facilitated the industry development. Our findings also implicate to industrial practitioners and policymakers for sustaining the emerging industry development at both the current- and the post-Kyoto protocol periods. - Highlights: • The carbon trader is a catalyst to link CDM project owner and trading market in China • The evolution of carbon trading industry has four stages with various driving forces. • Nurturing business ecosystems facilitates the carbon trading industry development. • The ecosystem approach works via the lens of Context, Configuration and Cooperation. • The ecosystem approach implicates to carbon trading industry at the post-Kyoto era

  16. Continuation of Research, Commercialization, and Workforce Development in the Polymer/Electronics Recycling Industry

    Energy Technology Data Exchange (ETDEWEB)

    Mel Croucher; Rakesh Gupta; Hota GangaRao; Darran Cairns; Jinzing Wang; Xiaodong Shi; Jason Linnell; Karen Facemyer; Doug Ritchie; Jeff Tucker

    2009-09-30

    The MARCEE Project was established to understand the problems associated with electronics recycling and to develop solutions that would allow an electronics recycling industry to emerge. While not all of the activities have been funded by MARCEE, but through private investment, they would not have occurred had the MARCEE Project not been undertaken. The problems tackled and the results obtained using MARCEE funds are discussed in detail in this report.

  17. Promotional operation for developing industrial technologies for global environment in fiscal 1998. International research exchange operation; 1998 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kokusai kenkyu koryu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With an objective of creating a new scope of study intended of solving global environment problems and structuring a new technical system, exchanges with overseas researchers and research institutions have been carried out subsequent to those in last year. In fiscal 1998, six researchers from different countries were invited to implement joint researches, and two overseas researchers were invited to an international conference on industrial technologies for global environment. In addition, in order to identify trends of research and development in overseas countries, two researchers were sent to universities in Germany and the U.S.A., and three researchers to international conferences and symposiums on the industrial technologies for global environment. It was intended to exchange technological information between overseas researchers and Japanese researchers who are performing the advanced researches on the industrial technologies for global environment, and to proliferate the latest items of technological information. Therefore, seven international seminars have been held, including the '98 Japan-China Global Environment Protection Symposium, 'substance migration and carbon circulation in coral reefs', 'plant bio-technologies in the 21st century', and the Fourth International Forum for Environmental Catalysts. (NEDO)

  18. Promotional operation for developing industrial technologies for global environment in fiscal 1998. International research exchange operation; 1998 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kokusai kenkyu koryu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With an objective of creating a new scope of study intended of solving global environment problems and structuring a new technical system, exchanges with overseas researchers and research institutions have been carried out subsequent to those in last year. In fiscal 1998, six researchers from different countries were invited to implement joint researches, and two overseas researchers were invited to an international conference on industrial technologies for global environment. In addition, in order to identify trends of research and development in overseas countries, two researchers were sent to universities in Germany and the U.S.A., and three researchers to international conferences and symposiums on the industrial technologies for global environment. It was intended to exchange technological information between overseas researchers and Japanese researchers who are performing the advanced researches on the industrial technologies for global environment, and to proliferate the latest items of technological information. Therefore, seven international seminars have been held, including the '98 Japan-China Global Environment Protection Symposium, 'substance migration and carbon circulation in coral reefs', 'plant bio-technologies in the 21st century', and the Fourth International Forum for Environmental Catalysts. (NEDO)

  19. Clothing industry: development problems, regional dislocation and modern management technologies for small enterprises

    Directory of Open Access Journals (Sweden)

    I. Hristoforova

    2015-01-01

    Full Text Available This article discusses issues related to the problems of development of light industry in the territory of the former Soviet Union, systematize industry regions and analyzes modern management technologies used by small businesses garment industry. The aim of the article is the analysis of the organizational and economic aspects of light industry on the example of clothing companies. The objectives of the article: to sistematize the major regions of the dislocation of light industry: textile, footwear, clothing; to characterize the current state of the apparel industry enterprises; to show the value of small clothing companies; to study the need for the introduction of flexible manufacturing systems (FMS on small sewing factories; to analyze the range of the scientific development of national universities in the study of flexible manufacturing systems and give them a brief description.Methodology. The methodological basis of the paper is the following scientific methods: deduction, comparative and group analysis, desk research. The Results. The result of the study is to identify the main issues and trends in the development of light industry, ordering the placement of the industry in the territory of the former Soviet Union, the definition of the most popular management techniques used in small businesses garment industry.Conclusions / significance. The above article analyzes the development of light industry has allowed to identify the main trends and formulate problems for the enterprises. New conditions require the development of small enterprises and the introduction of modern technologies in production processes and management.

  20. Development of Radiotracer Techniques in Industry

    International Nuclear Information System (INIS)

    Wardono

    2000-01-01

    Contribution of radiotracer techniques to solve problems in industrial process plants have been recognized since a long time. Radiotracer application was governed by three main components, namely radioisotopes, radiation detection and data interpretation of an experiment. The three main components mentioned above have been continually developed to overcome problems relating to the operation of industrial process plants. The availability of isotope generator is one of the development aspect in radiotracer technique. Radiation hazard in radiotracer experiment may be reduced by applying isotope generator and on the other hand the delivery of radiotracer to the plant site from the radioisotopes producer was made easier. The development of microprocessor in computer system has facilitated data recording, storing and retrieving. Development in mathematical model supported by radiotracer experiment enhance data interpretation and shed light on various phenomena of flow process. Generally a flow dynamic in a process plant in all kind of industries can be studied using radiotracer technique. However the main challenge coming from petroleum, petrochemical and mineral processing industries

  1. Research and photovoltaic industry at the United States

    International Nuclear Information System (INIS)

    Lerouge, Ch.; Herino, R.; Delville, R.; Allegre, R.

    2006-06-01

    For a big country as the United States, the solar energy can be a solution for the air quality improvement, the greenhouse gases fight and the reduction of the dependence to the imported petroleum and also for the economic growth by the increase of the employment in the solar industry sector. This document takes stock on the photovoltaic in the United States in the industrial and research domains. The american photovoltaic industry is the third behind the Japan and the Germany. (A.L.B.)

  2. Innovative Development of Building Materials Industry of the Region Based on the Cluster Approach

    Directory of Open Access Journals (Sweden)

    Mottaeva Asiiat

    2016-01-01

    Full Text Available The article discusses issues of innovative development of building materials industry of the region based on the cluster approach. Determined the significance of regional cluster development of the industry of construction materials as the effective implementation of the innovative breakthrough of the region as an important part of strategies for strengthening innovation activities may be to support the formation and development of cluster structures. Analyses the current situation with innovation in the building materials industry of the region based on the cluster approach. In the course of the study revealed a direct correlation between involvement in innovative activities on a cluster basis, and the level of development of industry of construction materials. The conducted research allowed identifying the factors that determine the innovation process, systematization and classification which determine the sustainable functioning of the building materials industry in the period of active innovation. The proposed grouping of innovations for the construction industry taking into account industry-specific characteristics that reflect modern trends of scientific and technological progress in construction. Significance of the study lies in the fact that the proposals and practical recommendations can be used in the formation mechanism of innovative development of building materials industry and the overall regional construction complex of Russian regions by creating clusters of construction.

  3. Fiscal 2000 survey report on the survey and research on green technology industry; 2000 nendo green technology industry ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The approaches of the Government and local autonomies to green technologies are surveyed toward the construction of a green technology industry. The present activities and future outlook of environmental industries interested in green technologies are surveyed and examined, the green technologies here including (1) energy conservation measures and development of non-fossil fuels, (2) energy-related and environmental measures for countering global warming, (3) waste treatment measures for countering dioxins and endocrine disrupters. A survey is conducted of the outlines and future trends of green technology related important studies now under way at laboratories and research institutes of universities, the Government, and private-sector corporations. Based on the results of the surveys, important subjects of technical development in green technologies are extracted and studied for the possibility and outlook of their practical application. Tasks to discharge and problems to occur before they are introduced to the market are also evaluated and confirmed. Based on the results of the research and development of green technologies, actualities of environmental industries are taken up, and the problems and tasks to be settled before environmental technologies are introduced to the market are investigated and studied. (NEDO)

  4. Strategies for Developing China's Software Industry

    OpenAIRE

    Mingzhi Li; Ming Gao

    2003-01-01

    The software industry is deemed an ideal target for a developing country to integrate into the world information and communications technology (ICT) market. On the one hand the industry is labor intensive, and the developing countries have a large labor surplus; on the other hand, it is a worldwide trend for developed countries to outsource a vast amount of low-end, software-related tasks to the low-cost countries and regions, which fits into some developing countries’ caliber nicely. India h...

  5. Guidelines for PWR safety research and development at NUCLEBRAS - Brazil

    International Nuclear Information System (INIS)

    Pinheiro, R.B.

    1980-06-01

    NUCLEBRAS research into different areas of pressurized light-water reactor technology, is one of the aims of its Research and Development Center, Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), in Belo Horizonte. The main effort of the center is now directed to give technical support to the industrial activities of the Nuclear Program, and to carry out R and D work in strainght connection with these activities. As a consequence few work on safety research is actualy being performed, although the number of activities in this field increases steadily, not as a function but strong related to the development of our industrial program. Basic training and qualification of personnel at CDTN for different research and development activities of NUCLEBRAS has high priority. This is covered either by agreements with national institutions (e.g. universities) or using the various possibilities offered by special agreements and cooperation programs with research centers and other institutions, not only but mainly in Germany, F.R. (Author) [pt

  6. Hydropower research and development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report is a compilation of information on hydropower research and development (R and D) activities of the Federal government and hydropower industry. The report includes descriptions of on-going and planned R and D activities, 1996 funding, and anticipated future funding. Summary information on R and D projects and funding is classified into eight categories: fish passage, behavior, and response; turbine-related; monitoring tool development; hydrology; water quality; dam safety; operations and maintenance; and water resources management. Several issues in hydropower R and D are briefly discussed: duplication; priorities; coordination; technical/peer review; and technology transfer/commercialization. Project information sheets from contributors are included as an appendix.

  7. Conceptual Approach to Forming the Basic Code of Neo-Industrial Development of a Region

    Directory of Open Access Journals (Sweden)

    Elena Leonidovna Andreeva

    2017-09-01

    Full Text Available In the article, the authors propose the conceptual fundamentals of the “code approach” to the regional neo-industrial development. The purpose of the research is to reveal the essence of the transition to a new type of industrial and economic relations through a prism of “genetic codes” of the region. We consider these codes as a system of the “racial memory” of a territory, which determines the specificity and features of neo-industrialization realization. We substantiated the hypothesis about the influence of the “genetic codes” of the region on the effectiveness of the neo-industrialization. We have defined the participants, or else the carriers of the codes in the transformation of regional inheritance for the stimulation of the neoindustrial development of region’s economy. The subject matter of the research is the distinctive features of the functioning of the determinative region’s codes. Their content determines the socio-economic specificity of the region and the features of innovative, informational, value-based and competence-based development of the territory. The determinative codes generate the dynamic codes of the region, which are understood as their derivatives. They have a high probability of occurrence, higher speed of development and distribution, internal forces that make possible the self-development of the region. The scientific contribution is the substantiation of the basic code of the regional neo-industrial development. It represents the evolutionary accumulation of the rapid changes of its innovative, informational, value-based and competence-based codes stimulating the generation and implementation of new ideas regarding to economic entities adapted to the historical and cultural conditions. The article presents the code model of neo-industrial development of the region described by formulas. We applied the system analysis methods, historical and civilization approaches, evolutionary and

  8. The Strategic Principles of Formation and Development of the Biofuel Industry in Ukraine

    Directory of Open Access Journals (Sweden)

    Klymchuk Oleksandr V.

    2017-04-01

    Full Text Available The article is aimed at highlighting the strategic principles of formation and development of the biofuel production in Ukraine at a competitive level. The carried out comprehensive analysis of scientific publications indicates the relevance of the pace of development in the biofuel industry as in the world, so in Ukraine. However, the low level of consumption and production of biofuels in our country requires further research of strategic nature. It has been found that formation of the competitive production of biofuels in Ukraine would ensure the positive developments in the economic, energy, agro-industrial, and environmental directions. On the basis of the carried out SWOT-analysis, the author has evaluated internal forces and the system of internal shortages, as well as the resource potential of the agro-industrial complex towards the implementation of existing external opportunities and confronting various threats, emerging in the market conditions during the process of development and rise of the biofuel industry.

  9. Organization of industrial application of academic research on biocatalytic pre-treatment processes of cotton

    NARCIS (Netherlands)

    Bouwhuis, G.H. (Gerrit); Brinks, G.J. (Ger); Warmoeskerken, M.M.C.G. (Marijn)

    2011-01-01

    A lot of research effort is put in developing enzymatic treatment of textiles by focusing on the performance of enzymes on lab-scale. Despite all this work upgrading of these developments from lab-scale to industrial scale has not been really successful. Companies are nowadays confronted with rapid

  10. What we do | Page 26 | IDRC - International Development Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This multinational study analyzes the career decisions and research performance of young scientists in higher education, government, parastatal (organizations whose activities serve the state), and industrial research and development (R&D) sectors across Africa. North Of Sahara, South Of Sahara, Canada. PROJECT ...

  11. Intellectual Organization in the New Model of the Russian Marine Industry Development

    Directory of Open Access Journals (Sweden)

    N.A. Kostrikova

    2014-06-01

    Full Text Available The role of intellectual organizations in the formation of professional competence, social adaptability and volitional qualities of workers of marine industry is actual in terms of growth of natural and man-made emergency situations, unstable socio-economic environment. In the marine industry, except for the education system and research, such organizations have prospects of development as the most competitive in the shipbuilding, fishing industry, port management, the logistics of fishing in the ocean and coastal fisheries, transport and storage prior to further processing. In this article is proposed a holistic resource approach to the formation of intellectual organization as a major maritime educational complex that integrates all stages of maritime specialist training, from a seaman to a master of a large ship including active research and intense maritime practice.

  12. PROBLEMS AND POTENTIAL OF DEVELOPMENT OF THE INDUSTRIAL ENTERPRISES OF THE KNOWLEDGE-INTENSIVE BRANCHES

    Directory of Open Access Journals (Sweden)

    Mikhail Yakovlevich Veselovsky

    2016-01-01

    Full Text Available In the article the problems of enterprise development high-tech industries, analyzes the factors that complicate the processes of knowledge-intensive production management. It provided a number of problems that make it difficult to increase the economic efficiency of high-tech industry. To solve the above problems need to increase the investment program and the economic attractiveness of high-tech industries that is to be developed, modern management system, carried out the reform of the knowledge-based industry to provide high levels of efficiency of new organizational structures in the current economic conditions compared to the existing, outdated forms. The purpose / goal. The aim of this study is to analyze the causes that affect the development potential of knowledge-based industries and enterprises identify problems that impede improving the economic efficiency of the Russian high-tech industry. Purpose: To identify the problems that are most difficult to improve the economic efficiency of the Russian high-tech industry; consider the high-tech industry; examine the reasons for the reform of the knowledge-based industry; explore the level of innovation activity of organizations of high-tech industries. Methodology. The methodological and theoretical basis of the study are the works, monographs, research papers, studies of Soviet authors on the development of knowledge-intensive industries, materials of State Statistics. We used scientific methods of research, such as the comparative method of analysis, synthesis, analysis and synthesis. Results. Given the concept of the domestic high-tech complex (NEC, defined the environment in which businesses operate NEC. The features of these companies, where there is the presence of a strong innovation potential. The requirements for knowledge-intensive production as the backbone of a new stage of the development lifecycle. A number of problems hampering the development and transformation of enterprise

  13. An Industry/Academe Consortium for Achieving 20% wind by 2030 through Cutting-Edge Research and Workforce Training

    Energy Technology Data Exchange (ETDEWEB)

    Sotiropoulos, Fotis [Univ. of Minnesota, Minneapolis, MN (United States); Marr, Jeffrey D.G. [Univ. of Minnesota, Minneapolis, MN (United States); Milliren, Christopher [Univ. of Minnesota, Minneapolis, MN (United States); Kaveh, Mos [Univ. of Minnesota, Minneapolis, MN (United States); Mohan, Ned [Univ. of Minnesota, Minneapolis, MN (United States); Stolarski, Henryk [Univ. of Minnesota, Minneapolis, MN (United States); Glauser, Mark [Univ. of Minnesota, Minneapolis, MN (United States); Arndt, Roger [Univ. of Minnesota, Minneapolis, MN (United States)

    2013-12-01

    In January 2010, the University of Minnesota, along with academic and industry project partners, began work on a four year project to establish new facilities and research in strategic areas of wind energy necessary to move the nation towards a goal of 20% wind energy by 2030. The project was funded by the U.S. Department of Energy with funds made available through the American Recovery and Reinvestment Act of 2009. $7.9M of funds were provided by DOE and $3.1M was provided through matching funds. The project was organized into three Project Areas. Project Area 1 focused on design and development of a utility scale wind energy research facility to support research and innovation. The project commissioned the Eolos Wind Research Field Station in November of 2011. The site, located 20 miles from St. Paul, MN operates a 2.5MW Clipper Liberty C-96 wind turbine, a 130-ft tall sensored meteorological tower and a robust sensor and data acquisition network. The site is operational and will continue to serve as a site for innovation in wind energy for the next 15 years. Project Areas 2 involved research on six distinct research projects critical to the 20% Wind Energy by 2030 goals. The research collaborations involved faculty from two universities, over nine industry partners and two national laboratories. Research outcomes include new knowledge, patents, journal articles, technology advancements, new computational models and establishment of new collaborative relationships between university and industry. Project Area 3 focused on developing educational opportunities in wind energy for engineering and science students. The primary outcome is establishment of a new graduate level course at the University of Minnesota called Wind Engineering Essentials. The seminar style course provides a comprehensive analysis of wind energy technology, economics, and operation. The course is highly successful and will continue to be offered at the University. The vision of U.S. DOE to

  14. A lesson from Japan: research and development efficiency is a key element of pharmaceutical industry consolidation process.

    Science.gov (United States)

    Shimura, Hirohisa; Masuda, Sachiko; Kimura, Hiromichi

    2014-02-01

    Scholarly attention to pharmaceutical companies' ability to sustain research and development (R&D) productivity has increased as they increasingly handle business challenges. Furthermore, the deterioration of R&D productivity has long been considered a major cause of mergers and acquisitions (M&As). This study attempts to investigate quantitatively the possible causes of the deterioration and the relationship between the deterioration and M&As by examining the Japanese pharmaceutical industry. Japan from 1980 to 1997 is an ideal case because of the availability of official data, but more importantly the significant changes in its business environment at the time. Using the Malmquist Index and data envelopment analysis, we measured the deterioration of R&D productivity from 1980 to 1997 based on a sample of 15 Japanese companies. Two lessons can be learned from Japan's case. First, to sustain R&D productivity over the long term, companies should use licensing activities and focus on the dominant therapeutic franchises. Second, if a company fails significantly to catch up with the benchmark, it is likely to pursue an M&A or seek an alternative way to improve R&D productivity. These findings appear similar to the current situation of the global pharmaceutical industry, although Japan pursued more licensing activities than M&A to improve R&D productivity.

  15. SWOT Analysis of Industrial Development of Double-low Rapeseed in Hubei Province

    OpenAIRE

    Xiong, Qiu-fang; Sun, Xiu-li

    2011-01-01

    Based on SWOT analysis method, this paper conducts analysis on the industrial development environment of double-low rapeseed in Hubei Province from the following four aspects, in order to crystallize its resources advantage and disadvantage and make it how the opportunities and challenges that it is faced by. First, advantage analysis: excellent geographic conditions, vigorous government support, powerful scientific research force, sound industrial system support; second, disadvantage analysi...

  16. Engineering research, development and technology

    International Nuclear Information System (INIS)

    1994-05-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report

  17. Thorium research and development in Turkey

    International Nuclear Information System (INIS)

    Güngör, Görkem

    2015-01-01

    Turkey has a great potential regarding thorium resources. Thorium exploration activities have been done in the past mainly by state organizations for determining the thorium resources in Turkey. Thorium occurs as complex mineral together with barite, fluorite and rare earth elements (REE). The increase in global demand for REE creates the opportunity for REE production which will also produce thorium as a by-product. The development of nuclear energy program in Turkey provides the stimulus for research and development activities in nuclear technologies. The final declaration of the workshop emphasizes the importance of thorium reserves in Turkey and the necessity for thorium exploration and development activities in order to determine the feasibility of thorium mining and fuel cycle in Turkey. These activities should be conducted together with the development of technologies for separation of these complex minerals and purification of thorium, REE and other minerals to be utilized as commercial products. There are advanced academic research studies on thorium fuel cycle which should be supported by the industry in order to commercialize the results of these studies. Turkey should be integrated to international R and D activities on ADS which is expected to commercialize on medium term. The legislative framework should be developed in order to provide the industrial baseline for nuclear technologies independent from nuclear regulatory activities

  18. Spin-off produced by the fusion research and development

    International Nuclear Information System (INIS)

    Koizumi, Koichi; Konishi, T.; Tsuji, Hiroshi

    2001-03-01

    Nuclear fusion devices are constructed by the integration of many frontier technologies and fusion science based on a wide area of science such as physics, electromagnetics, thermodynamics, mechanics, electrical engineering, electronics, material engineering, heat transfer and heat flow, thermal engineering, neutronics, cryogenics, chemical engineering, control engineering, instrumentation engineering, vacuum engineering. For this, the research and development of elementary technology for fusion devices contributes to advance the technology level of each basic field. In addition, the mutual stimulus among various research fields contributes to increase the potential level of whole 'science and technology'. The spin-offs produced by the fusion technology development give much contribution not only to the general industrial technologies such as semiconductor technology, precision machining of large component, but also contribute to the progress of the accelerator technology, application technology of superconductivity, instrumentation and diagnostics, plasma application technology, heat-resistant and heavy radiation-resistant material technology, vacuum technology, and computer simulation technology. The spin-off produced by the fusion technology development expedite the development of frontier technology of other field and give much contribution to the progress of basic science on physics, space science, material science, medical science, communication, and environment. This report describes the current status of the spin-off effects of fusion research and development by focusing on the contribution of technology development for International Thermonuclear Experimental Reactor (ITER) to industrial technology. The possibilities of future application in the future are also included in this report from the view point of researchers working for nuclear fusion development. Although the nuclear fusion research has a characteristic to integrate the frontier technologies of

  19. Beverages-Food Industry Cluster Development Based on Value Chain in Indonesia

    OpenAIRE

    Lasmono Tri Sunaryanto; Gatot Sasongko; Ira Yumastuti

    2014-01-01

    This study wants to develop the cluster-based food and beverage industry value chain that corresponds to the potential in the regions in Java Economic Corridor. Targeted research: a description of SME development strategies that have been implemented, composed, and can be applied to an SME cluster development strategy of food and beverage, as well as a proven implementation strategy of SME cluster development of food and beverage. To achieve these objectives, implemented descriptive methods, ...

  20. Creative Industries in Ukraine: Analysis and Prospects of the Development

    Directory of Open Access Journals (Sweden)

    Iryna V. Skavronska

    2017-06-01

    Full Text Available This paper provides a snapshot of the role and importance of the creative industries for the Ukrainian economy. The economic dimension of the creative sector in Ukraine is becoming of higher interest for policy-makers taking into account its increasing contribution to international trade and great potential for further development. Correspondingly, this research is aimed at determining the importance and efficiency of the creative industries for the Ukrainian economy. The methodology of the study is founded on exploring the impact of the creative sector on an economic milieu in Ukraine. The paper proposes a strategy how the creative industries can transform Ukraine into a creative economy. This approach identifies four primary targets, which may result in economic, social, creative and cultural benefits, including keeping and development the creative talent, encouragement of the Ukrainian creative businesses, promoting “culture of openness,” and shaping the creative ecosystem. This study provides a unique and vital contribution to ongoing discussions about the significance of the creative industries for national economies highlighting the universalized assumptions concerning the position of this sector in the Ukrainian economy.

  1. Management and Development of the RT Research Facilities and Infrastructures

    International Nuclear Information System (INIS)

    Kim, Won Ho; Nho, Young Chang; Kim, Jae Sung

    2009-01-01

    The purpose of this project are to operate the core facilities of the research for the Radiation Technology in stable and to assist the research activities efficiently in the industry, academic, and research laboratory. By developing the infrastructure of the national radio technology industry, we can activate the researching area of the RT and the related industry, and obtain the primary and original technology. The key point in the study of the RT and the assistance of the industry, academic, and research laboratory for the RT area smoothly, is managing the various of unique radiation facilities in our country. The gamma Phytotron and Gene Bank are essential in the agribiology because these facilities are used to preserve and utilize the genes and to provide an experimental field for the environment and biotechnology. The Radiation Fusion Technology research supporting facilities are the core support facilities, and are used to develop the high-tech fusion areas. In addition, the most advanced analytical instruments, whose costs are very high, should be managed in stable and be utilized in supporting works, and the experimental animal supporting laboratory and Gamma Cell have to be maintained in high level and managed in stable also. The ARTI have been developed the 30MeV cyclotron during 2005∼2006, aimed to produce radioisotopes and to research the beam applications as a result of the project, 'Establishment of the Infrastructure for the Atomic Energy Research Expansion', collaborated with the Korea Institute of Radiological and Medical Sciences. In addition, the ARTI is in the progress of establishing cyclotron integrated complex as a core research facility, using a proton beam to produce radioisotopes and to support a various research areas. The measurement and evaluation of the irradiation dose, and irradiation supporting technology of the Good Irradiation Practice(GIP) are essential in various researching areas. One thing to remember is that the publicity

  2. OCP TECD Report - TARDEC Blast Mitigation Program (BMP) and National Defense Industrial Association (NDIA) Michigan (MI) Chapter Cooperative Research and Development Agreement (CRADA) Summary

    Science.gov (United States)

    2017-09-26

    Standard, MIL-STD-3058, Occupant-Centric Protection for Military Ground Vehicles. 15. SUBJECT TERMS Occupant Centric Platform Technology-Enabled...Capability Demonstration (OCP TECD), Occupant-centric, Occupant Protection , Underbody Blast, National Defense Industrial Association (NDIA...Cooperative Research and Development Agreement (CRADA) 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 19a. NAME OF

  3. New Product Development in Traditional Industries: Decision-Making Revised

    Directory of Open Access Journals (Sweden)

    Jon Mikel Zabala-Iturriagagoitia

    2012-02-01

    Full Text Available This paper investigates whether decisions considered as common in new product development literature are also valid in a region characterized by traditional industries. The research is grounded on innovative companies in the Valencian Region (Spain. Using the statistical tool of factor analysis, we test if the groups of decisions identified by the literature can be confirmed in our empirical sample. Therewith, we aim to link the theoretical and empirical fields in the context of new product development and product innovation management.

  4. Strategies for Developing China's Software Industry

    Directory of Open Access Journals (Sweden)

    Mingzhi Li

    2003-01-01

    Full Text Available The software industry is deemed an ideal target for a developing country to integrate into the world information and communications technology (ICT market. On the one hand the industry is labor intensive, and the developing countries have a large labor surplus; on the other hand, it is a worldwide trend for developed countries to outsource a vast amount of low-end, software-related tasks to the low-cost countries and regions, which fits into some developing countries’ caliber nicely. India has often been cited as the role model for a developing country to tap into the world software market for its continuous success in the software export sector. In comparison, China’s software industry is still negligible in the world despite its sustained high economic growth rate since the economic reform took off in the late 1970s.This paper aims at examining strategies for developing China’s software industry. We use India as a reference because of the similarities of the two countries’ stages of economic development and the clear divergence in their ICT structures and development paths. Although the language barrier has often been singled out as the major obstacle for China’s software exports, we believe the major reasons for its underdevelopment can be ascribed to the following factors. On the national level, the government attention has been skewed toward the hardware sector in the ICT industry, and there is no clear national vision for the strategic direction for the software industry.On the industry and ªrm level, software development has been regarded as the art of individual creativity rather than an engineering process. As a result, the importance of quality and standards, the two important critical factors in software development, have been largely neglected. Perhaps an even more fundamental factor lies in the deeply rooted notion that software is an attachment to the hardware and should be a free product. The lack of intellectual

  5. Research & Development Roadmap for Next-Generation Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Goetzler, William [Navigant Consulting, Inc., Burlington, MA (United States); Sutherland, Timothy [Navigant Consulting, Inc., Burlington, MA (United States); Foley, Kevin [Navigant Consulting, Inc., Burlington, MA (United States)

    2012-03-01

    Appliances present an attractive opportunity for near-term energy savings in existing building, because they are less expensive and replaced more regularly than heating, ventilation, and air-conditioning (HVAC) systems or building envelope components. This roadmap targets high-priority research and development (R&D), demonstration and commercialization activities that could significantly reduce residential appliance energy consumption. The main objective of the roadmap is to seek activities that accelerate the commercialization of high-efficiency appliance technologies while maintaining the competitiveness of American industry. The roadmap identified and evaluated potential technical innovations, defined research needs, created preliminary research and development roadmaps, and obtained stakeholder feedback on the proposed initiatives.

  6. Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

    Science.gov (United States)

    Teh, B. T.; Ho, C. S.; Matsuoka, Y.; Chau, L. W.; Gomi, K.

    2014-02-01

    Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis.

  7. Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

    International Nuclear Information System (INIS)

    Teh, B T; Ho, C S; Chau, L W; Matsuoka, Y; Gomi, K

    2014-01-01

    Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis

  8. New Product Development in the Fashion Industry: An Empirical Investigation of Italian Firms

    OpenAIRE

    Bandinelli, Romeo; Rinaldi, Rinaldo; Rossi, Monica; Terzi, Sergio

    2013-01-01

    This paper investigates how companies in the fashion industry organize, plan and perform their New Product Development process (NPD). The results have been achieved through an empirical study carried out by the authors with the support of the GeCo Observatory, an Italian research initiative launched in 2012. This paper shows the details of eight selected case studies from the Italian fashion industry.

  9. The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report. UNO Aviation Monograph Series. UNOAI Report.

    Science.gov (United States)

    Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, George; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; O'Neil, Patrick D.; Tarry, Scott E.; Vlasek, Karisa D.

    This document contains four papers on aeronautics education, research, and partnerships that partly supported through the Aeronautics Education, Research, and Industry Alliance (AERIAL). The paper "2002 AERIAL Monograph" (Brent D. Bowen, Jocelyn S. Nickerson, Mary M. Fink, et al.) presents an overview of research and development in the…

  10. Strategies for personnel sustainable lifecycle at astronomical observatories and local industry development

    Science.gov (United States)

    Bendek, Eduardo A.; Leatherbee, Michael; Smith, Heather; Strappa, Valentina; Zinnecker, Hans; Perez, Mario

    2014-08-01

    Specialized manpower required to efficiently operate world-class observatories requires large investments in time and resources to train personnel in very specific areas of engineering. Isolation and distances to mayor cities pose a challenge to retain motivated and qualified personnel on the mountain. This paper presents strategies that we believe may be effective for retaining this specific know-how in the astronomy field; while at the same time develop a local support industry for observatory operations and astronomical instrumentation development. For this study we choose Chile as a research setting because it will host more than 60% of the world's ground based astronomical infrastructure by the end of the decade, and because the country has an underdeveloped industry for astronomy services. We identify the astronomical infrastructure that exists in the country as well as the major research groups and industrial players. We further identify the needs of observatories that could be outsourced to the local economy. As a result, we suggest spin-off opportunities that can be started by former observatory employees and therefore retaining the knowhow of experienced people that decide to leave on-site jobs. We also identify tools to facilitate this process such as the creation of a centralized repository of local capabilities and observatory needs, as well as exchange programs within astronomical instrumentation groups. We believe that these strategies will contribute to a positive work environment at the observatories, reduce the operation and development costs, and develop a new industry for the host country.

  11. OpenFOAM: Open source CFD in research and industry

    Science.gov (United States)

    Jasak, Hrvoje

    2009-12-01

    The current focus of development in industrial Computational Fluid Dynamics (CFD) is integration of CFD into Computer-Aided product development, geometrical optimisation, robust design and similar. On the other hand, in CFD research aims to extend the boundaries ofpractical engineering use in "non-traditional " areas. Requirements of computational flexibility and code integration are contradictory: a change of coding paradigm, with object orientation, library components, equation mimicking is proposed as a way forward. This paper describes OpenFOAM, a C++ object oriented library for Computational Continuum Mechanics (CCM) developed by the author. Efficient and flexible implementation of complex physical models is achieved by mimicking the form ofpartial differential equation in software, with code functionality provided in library form. Open Source deployment and development model allows the user to achieve desired versatility in physical modeling without the sacrifice of complex geometry support and execution efficiency.

  12. Translational Partnership Development Lead | Center for Cancer Research

    Science.gov (United States)

    PROGRAM DESCRIPTION The Frederick National Laboratory for Cancer Research (FNLCR) is a Federally Funded Research and Development Center operated by Leidos Biomedical Research, Inc on behalf of the National Cancer Institute (NCI). The staff of FNLCR support the NCI’s mission in the fight against cancer and HIV/AIDS. Currently we are seeking a Translational Partnership Development Lead (TPDL) who will work closely with the Office of Translational Resources (OTR) within the Office of the Director (OD) of NCI’s Center for Cancer Research (CCR) to facilitate the successful translation of CCR’s basic and preclinical research advances into new therapeutics and diagnostics. The TPDL with be strategically aligned within FNLCR’s Partnership Development Office (PDO), to maximally leverage the critical mass of expertise available within the PDO. CCR comprises the basic and clinical components of the NCI’s Intramural Research Program (IRP) and consists of ~230 basic and clinical Investigators located at either the NIH main campus in Bethesda or the NCI-Frederick campus. CCR Investigators are focused primarily on cancer and HIV/AIDS, with special emphasis on the most challenging and important high-risk/high-reward problems driving the fields. (See https://ccr.cancer.gov for a full delineation of CCR Investigators and their research activities.) The process of developing research findings into new clinical applications is high risk, complex, variable, and requires multiple areas of expertise seldom available within the confines of a single Investigator’s laboratory. To accelerate this process, OTR serves as a unifying force within CCR for all aspects of translational activities required to achieve success and maintain timely progress. A key aspect of OTR’s function is to develop and strengthen essential communications and collaborations within NIH, with extramural partners and with industry to bring together experts in chemistry, human subjects research

  13. Development of Transportation Package for Medical and Industrial Radioisotope

    Energy Technology Data Exchange (ETDEWEB)

    Seo, K. S.; Lee, J. C.; Bang, K. S. (and others)

    2007-06-15

    The objective of this project is development of RI transport package and establishment of transportation system. This report describes the objective of project, necessaries, state of related technology, scope and results, proposal for application etc. The scope of the project consist of establishment of performance test system for type-A package for medical use, development of type-B package for industrial use and development of casting technology for DU shield and evaluation of shielding efficiency. The research results obtained from this project are expected to be utilized as a basic data for design, analysis, test and license of transport package.

  14. Modelling system development of risky industry on world experience base

    Directory of Open Access Journals (Sweden)

    O.T. Polishchuk

    2017-12-01

    Full Text Available The paper researches the tendencies and dynamic characteristics of risky business. The means of development stimulation in risky business in the USA are examined. The factors for insurance companies, banks, retirement funds of their investors’ function inability are explained. The multichoice model of economy structure transformation according to the innovative changes and regulatory policy is developed. The authors systematize the factors, which determine the branch attraction for risky investment. Four scenarios for the development of risky industry in Ukraine are studied and the matrix of their development is formed.

  15. Development of AZS refractories for the glass industry

    International Nuclear Information System (INIS)

    Guzman, A.M.; Rodriguez, P.

    2004-01-01

    Refractory materials can support high temperatures, thermal strength and the contact with aggressive environments, for this reason they are widely used in the cement, glass and steel industry. Commercial AZS (alumina-zirconia-silica) refractories are a good alternative in refractory materials for the glass industry' because they can support the aggressive conditions during liquid processing of glass. However, another problem encountered in glass industry is contamination by refractory' material that fall into the molten glass, which can produce a series of defects in the final product. This research was conducted to develop new formulations of AZS refractories with different amounts of ZrO 2 with the purpose of improving the characteristics, properties and the work conditions in the glass melting furnaces and, at the same time, lower the costs this type of refractories. The results obtained indicate that the composition with low content of ZrO 2 can provide better properties than the commercial product, with some modifications in the particle size distribution. Copyright (2004) AD-TECH - International Foundation for the Advancement of Technology Ltd

  16. AN INDUSTRIAL SOCIETY'S DEVELOPMENT AFFECT ON COMMUNITY LIVELIHOOD (PT. KIMA MAKASSAR CASE)

    OpenAIRE

    Rahman Saeni, Mohamad Thahir Haning, Andi Subhan Amir

    2018-01-01

    - "Impact of Development" is a concomitant change meaning if there is a change in the industrial/technological field, change will also occur simultaneously for both social-cultural and political fields. The result of this change is the relationship of people's behavior with the industrial environment which consequently change the attitude and the livelihood of the surrounding community. The research aims to describe how socio-cultural may impact on the attitude of the surrounding commun...

  17. Development of an integrated research and development program on eastern Canadian coals

    Energy Technology Data Exchange (ETDEWEB)

    Abbott, D

    1981-01-01

    Coal production and use, R and D performers on eastern Canadian coals, coordination of an R and D program, technical problems of the coal industry and R and D requirements, and recommendations for a research and development program are described. (27 refs.)

  18. Review of the biotechnology research and development (R and D ...

    African Journals Online (AJOL)

    The pharmaceutical industry is among high technology industries that needs considerable attention in research and development. Overall, the processes that a drug must go through from its production in the laboratory, to clinical trials on certain groups, to the drug being licensed and finally planning for its marketing makes ...

  19. 2008-2010 Research Summary: Analysis of Demand Response Opportunities in California Industry

    Energy Technology Data Exchange (ETDEWEB)

    Goli, Sasank [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Olsen, Daniel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McKane, Aimee [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Piette, Mary Ann [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-08-01

    This report describes the work of the Industrial Demand Response (DR) Team of Lawrence Berkeley National Laboratory’s Demand Response Research Center (DRRC) from 2008-2010, in the context of its mandate to conduct and disseminate research that broadens the knowledge base of DR strategies, with a focus on the Industrial-Agricultural-Water (IAW) sector. Through research and case studies of industrial sectors and entities, the DRRC-IAW Team continued to assimilate knowledge on the feasibility of industrial DR strategies with an emphasis on technical and economic evaluation and worked to encourage implementation of these strategies.

  20. Industry and forest wetlands: Cooperative research initiatives

    International Nuclear Information System (INIS)

    Shepard, J.P.; Lucier, A.A.; Haines, L.W.

    1993-01-01

    In 1989 the forest products industry responded to a challenge of the National Wetlands Policy Forum to initiate a cooperative research program on forest wetlands management organized through the National Council of the Paper Industry for Air and Stream Improvement (NCASI). The objective is to determine how forest landowners can manage wetlands for timber production while protecting other wetland functions such as flood storage, water purification, and food chain/wildlife habitat support. Studies supported by the NCASI in 9 states are summarized. Technical support on wetland regulatory issues to member companies is part of the research program. Since guidelines for recognizing wetlands for regulatory proposed have changed frequently, the NCASI has recommend an explicit link between wetland delineation and a classification system that considers difference among wetland types in vegetation, soils, hydrology, appearance, landscape position, and other factors. 16 refs

  1. Research and development in the electricity supply industry conference

    International Nuclear Information System (INIS)

    1995-01-01

    This document summarizes the views expressed in the conference papers. These are grouped into fuels for the future, coal fired powers stations, renewables, use of heat as a by-product of electricity generation, fuel cells, electric vehicles, and environmental issues in the electricity supply industry. The points and ideas from the two workshops held in conjunction with the conference are also summarized

  2. Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing

    Directory of Open Access Journals (Sweden)

    Adam Sanders

    2016-09-01

    Full Text Available Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industry 4.0 and lean manufacturing, and investigates whether Industry 4.0 is capable of implementing lean. Executing Industry 4.0 is a cost-intensive operation, and is met with reluctance from several manufacturers. This research also provides an important insight into manufacturers’ dilemma as to whether they can commit into Industry 4.0, considering the investment required and unperceived benefits. Design/methodology/approach: Lean manufacturing is first defined and different dimensions of lean are presented. Then Industry 4.0 is defined followed by representing its current status in Germany. The barriers for implementation of lean are analysed from the perspective of integration of resources. Literatures associated with Industry 4.0 are studied and suitable solution principles are identified to solve the abovementioned barriers of implementing lean. Findings: It is identified that researches and publications in the field of Industry 4.0 held answers to overcome the barriers of implementation of lean manufacturing. These potential solution principles prove the hypothesis that Industry 4.0 is indeed capable of implementing lean. It uncovers the fact that committing into Industry 4.0 makes a factory lean besides being smart. Originality/value: Individual researches have been done in various technologies allied with Industry 4.0, but the potential to execute lean manufacturing was not completely perceived. This paper bridges the gap between these two realms, and identifies

  3. The future of scientific, technical and industrial information to Third World users - A donors view. The experience of the International Development Research Centre (IDRC), Canada

    International Nuclear Information System (INIS)

    Broadbent, K.P.; Lafond, R.

    1990-05-01

    Access to scientific information by poorer countries, sometimes referred to as the ''South'', is limited in contrast to the countries in the ''North''. The South lacks the infrastructure, management and technical expertise to develop and support the range of services now commonplace in the information rich industrial countries of the ''North''. The programme of support to information systems and services in poorer countries by the International Development Research Centre (IDRC) is described with specific examples drawn from its industry and technology information programme. Third world countries are in a difficult position and need help to keep on the cutting edge of new information-communication technologies. Any help, however must focus on such factors as persistence, impact and sustainability of information systems and services. (author). 5 refs

  4. The future of scientific, technical and industrial information to Third World users - A donors view. The experience of the International Development Research Centre (IDRC), Canada

    Energy Technology Data Exchange (ETDEWEB)

    Broadbent, K P [International Development Research Centre, Ottawa (Canada). Science and Technology Information; Lafond, R [International Development Research Centre, Ottawa (Canada). Industry and Technology Programme

    1990-05-01

    Access to scientific information by poorer countries, sometimes referred to as the ``South``, is limited in contrast to the countries in the ``North``. The South lacks the infrastructure, management and technical expertise to develop and support the range of services now commonplace in the information rich industrial countries of the ``North``. The programme of support to information systems and services in poorer countries by the International Development Research Centre (IDRC) is described with specific examples drawn from its industry and technology information programme. Third world countries are in a difficult position and need help to keep on the cutting edge of new information-communication technologies. Any help, however must focus on such factors as persistence, impact and sustainability of information systems and services. (author). 5 refs.

  5. An overview of current situations of robot industry development

    Directory of Open Access Journals (Sweden)

    Wu Qiong

    2018-01-01

    Full Text Available As an industry of emerging technology, robot industry has become one of important signs to evaluate a country’s level in science and technology innovation and high-end manufacturing, and an important strategic field to take the preemptive opportunities in development of intelligent society. Developed countries such as the USA, Germany, France and Japan have formulated their robot R&D strategies and planning in succession. China boasts good industrial foundation and has made encouraging progress in the course of development of robot technology. This paper briefly discusses the application type of robot industry and current situations of robot industry development in countries around the world, and makes detailed explanation of current situations of robot industry development in China.

  6. West African Journal of Industrial and Academic Research ...

    African Journals Online (AJOL)

    Computer networks, Satellite & communications Engineering ResearchIndustrial Computer applications ... Information Assurance & Network Security: The African Dilemma ... E-Waste Management Environmental Protection • Management ...

  7. Ways of improvement of financial provision of industrial development

    Directory of Open Access Journals (Sweden)

    Shemyakina Natalya V.

    2013-03-01

    Full Text Available The article conducts the study of the state of financial provision of industrial development under modern conditions and justifies main ways of improvement and prospects of investment financing of technical development of the production potential. Classical theses and fundamental works of foreign and domestic scientists, statistical indicators and results of author’s studies of the problems of financing of technical development of industry became the methodological basis of the study. Using the conducted analysis of the state of financing the industrial development in Ukraine, potential sources of financial resources of development of the production potential (profit, depreciation, means of financial institutions and leasing, condition of the state financial support of technical development of the industrial sector and taking into account the modern experience of foreign countries, the article justifies main ways of improvement of the financial provision of industrial development. The proposed ways of improvement of financial provision of industrial development are based on: orientation at the modern model with attraction of all potential investment sources; state-private co-financing of investment projects of production development; de-centralisation of the state support through the use of various channels of support of the processes of industrial development; and formation of the market infrastructure of ensuring of financing of the innovation and investment process in industry.

  8. Development of the System of Investment Support of Projects in the Industrial-Innovative Development of Kazakhstan

    Science.gov (United States)

    Doskaliyeva, Bayan B.; Orynbassarova, Yerkenazym D.; Omarkhanov?, Zhibek M.; Karibaev, Yerkebulan S.; Baimukhametova, Ayagul S.

    2016-01-01

    The purpose of this study is to determine specific features of investment regulation mechanism aimed at providing effective implementation of projects in the context of industrial-innovative development of Kazakhstan. There the used the system of general scientific and special research methods providing the possibility to disclose processes and…

  9. Improving product development performance through knowledge outsourcing: a study of the Iranian automotive industry

    Directory of Open Access Journals (Sweden)

    Mazdeh, Mohammad Mahdavi

    2016-08-01

    Full Text Available This study aims to explore the dynamics of the knowledge supply process for new product development in the automotive industry, and to evaluate the impact of knowledge outsourcing on new product development performance. The model was developed using a literature review and a multiple case study approach that looked at ten research and development companies from the automotive industry in Iran. The results indicate that knowledge outsourcing would improve new product development performance by increasing the flexibility of the new product development process to react to the environment’s volatility, with few penalties in time and costs for automotive product development.

  10. Energy Efficient Industrialized Housing Research Program, Center for Housing Innovation, University of Oregon and the Florida Solar Energy Center

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G.Z.

    1990-01-01

    This research program addresses the need to increase the energy efficiency of industrialized housing. Two research centers have responsibility for the program: the Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. The two organizations provide complementary architectural, systems engineering, and industrial engineering capabilities. In 1989 we worked on these tasks: (1) the formation of a steering committee, (2) the development of a multiyear research plan, (3) analysis of the US industrialized housing industry, (4) assessment of foreign technology, (5) assessment of industrial applications, (6) analysis of computerized design and evaluation tools, and (7) assessment of energy performance of baseline and advanced industrialized housing concepts. The current research program, under the guidance of a steering committee composed of industry and government representatives, focuses on three interdependent concerns -- (1) energy, (2) industrial process, and (3) housing design. Building homes in a factory offers the opportunity to increase energy efficiency through the use of new materials and processes, and to increase the value of these homes by improving the quality of their construction. Housing design strives to ensure that these technically advanced homes are marketable and will meet the needs of the people who will live in them.

  11. West African Journal of Industrial and Academic Research

    African Journals Online (AJOL)

    ... communications, state-of-the-art developments in Information and communications technology, ... physics, industrial electronics, management sciences and engineering, industry chemistry, general technology rocketry, space and ... application of communications and information technology to these fields of importance.

  12. Industrial Economics in Scandinavia

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Møllgaard, Peter

    2004-01-01

    Based on diverse research methods, we trace and map industrial economics research in Denmark, Norway and Sweden in the periode of 1880 to 1908. After describing this research in terms of key contributors, we argue that industrial economics developed rather unevenly in the Scandinavian countries....... Danish research was mainly theoretical and strongly oriented towards the international context, whereas Norwegian research was largely industry analysis with a strong leaning towards managerial economics. Swedish research in industrial economics is very scant until the end of the 1960s.JEL Code: B1, B2...

  13. Results of research and development in large-scale research centers as an innovation source for firms

    International Nuclear Information System (INIS)

    Theenhaus, R.

    1978-01-01

    The twelve large-scale research centres of the Federal Republic of Germany with their 16,000 employees represent a considerable scientific and technical potential. Cooperation with industry with regard to large-scale projects has already become very close and the know-how flow as well as the contributions to innovation connected therewith are largely established. The first successful steps to utilizing the results of basic research, of spin off and those within the frame of research and development as well as the fulfilling of services are encouraging. However, there is a number of detail problems which can only be solved between all parties concerned, in particular between industry and all large-scale research centres. (orig./RW) [de

  14. Analysed with Shanghai international fashion the development of creative industry

    Directory of Open Access Journals (Sweden)

    Jinjin Ma

    2017-05-01

    Full Text Available Rapid development of economy, and promote people to enter the era of knowledge economy. Under this background, the global economy especially the economic model of developed countries began to industrial restructuring and structural adjustment, and fashion creative industry economy is the product of the change. It embodies a nation in such aspects as culture, science and technology and creative design of soft power, to some extent, also represents a national industry's international competitiveness, is one of the most important industry in the development of leading industry. In the globalization trend of strengthening, today, the increasingly fierce competition in the international fashion scale and degree, the development of creative industry has become a measure of a country or a city comprehensive competitiveness of one of the important symbol. Therefore, many countries and regions all over the industry as a strategic industry and pillar industry to develop. Along with the rapid economic and social development as well as the consumer demand is rising, fashion creative industry gradually become Shanghai currently one of the most promising new industries. Especially in the face of the global economic downturn, China's transformation of the mode of development environment, development fashion creative industry will help speed up the Shanghai industrial structure transformation, beneficial to stimulate consumer demand, to improve the Shanghai international influence, for the Shanghai a new round of development, the construction of "four centers" and one of the breach of the international metropolis.

  15. Achievement report on research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a recombinant DNA utilizing technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    Achievements were compiled on the research in fiscal 1981 on the 'research and development of a recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. For the method to create energy saving type bacteria stocks for processes centering around the escherichia coli, refinement was carried out on cytochrome P-450 and NADPH-cytochrome P-450 reduction enzyme respectively from hepatic microsome of rats administered with induction agents. Attempts were made to prepare antibodies working on them. For the method to create high-efficiency secreting bacteria stocks centering around bacillus subtilis, activity measurement and quantification were performed on enzymes external to the bacillus sutilis, and research was executed on introduction of neutral protease gene sensitive to bacillus subtilis temperatures into the NA20-S17 stock. For the method to create bacteria stocks to substitute raw materials used in the chemical industry, studies were performed on separation of enzymes and corresponding genes, and incorporation of the genes into the escherichia coli. In the comprehensive investigation and research on the recombinant DNA utilizing technology, information exchange and discussions meetings were held, and investigations were made on literatures and patents. (NEDO)

  16. Achievement report on research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a recombinant DNA utilizing technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    Achievements were compiled on the research in fiscal 1981 on the 'research and development of a recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. For the method to create energy saving type bacteria stocks for processes centering around the escherichia coli, refinement was carried out on cytochrome P-450 and NADPH-cytochrome P-450 reduction enzyme respectively from hepatic microsome of rats administered with induction agents. Attempts were made to prepare antibodies working on them. For the method to create high-efficiency secreting bacteria stocks centering around bacillus subtilis, activity measurement and quantification were performed on enzymes external to the bacillus sutilis, and research was executed on introduction of neutral protease gene sensitive to bacillus subtilis temperatures into the NA20-S17 stock. For the method to create bacteria stocks to substitute raw materials used in the chemical industry, studies were performed on separation of enzymes and corresponding genes, and incorporation of the genes into the escherichia coli. In the comprehensive investigation and research on the recombinant DNA utilizing technology, information exchange and discussions meetings were held, and investigations were made on literatures and patents. (NEDO)

  17. Development and issues of nuclear industry in Taiwan

    International Nuclear Information System (INIS)

    Kuangchi Liu

    1994-01-01

    Industrial and economic developments in Taiwan have achieved a so-called 'miracle' in the last decades. Endeavors by the private enterprise, prudent planning by the government, and the devoted efforts by the diligent and creative labor forces have been credited jointly with the result. To develop a sustainable nuclear industry in support of an efficient and safe power generation and other applications of nuclear energy in Taiwan, continuing efforts from the private industry, government and each individual of the nuclear industry will be required. In this paper, milestones of the past and major issues for future developments will be discussed

  18. OpenFOAM: Open source CFD in research and industry

    Directory of Open Access Journals (Sweden)

    Hrvoje Jasak

    2009-12-01

    Full Text Available The current focus of development in industrial Computational Fluid Dynamics (CFD is integration of CFD into Computer-Aided product development, geometrical optimisation, robust design and similar. On the other hand, in CFD research aims to extend the boundaries of practical engineering use in “non-traditional” areas. Requirements of computational flexibility and code integration are contradictory: a change of coding paradigm, with object orientation, library components, equation mimicking is proposed as a way forward. This paper describes OpenFOAM, a C++ object oriented library for Computational Continuum Mechanics (CCM developed by the author. Efficient and flexible implementation of complex physical models is achieved by mimicking the form of partial differential equation in software, with code functionality provided in library form. Open Source deployment and development model allows the user to achieve desired versatility in physical modeling without the sacrifice of complex geometry support and execution efficiency.

  19. Research into industrial technology policy trends in Australia. Role of government in promoting industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper reported the investigation into strategies of industrial technology, results of the R and D support plans, management of support fund plans, etc. by the Australian government. The present government introduced policies on industrial innovation and industrial technology, research and higher education, etc. from the end of 1997 to the end of 1999. Especially, recently the R and D preferential taxation system was introduced. As to organizations pertaining to science, technology, engineering and innovation, PMSEIC (prime minister's science, engineering and innovation council) under the direct control of prime minister is a top self-supporting organization, in which minister from each ministry join. Further, the assembly committee, which is not the bureaucratic organization, was separately established. In February 2000, the innovation summit was held, in which a lot of organizations from the industrial circle, government and research institutes participated. The conclusion was as follows: Australia is now at the crossroads of the resource dependent economy. The solution adopted in the past cannot meet the age of new knowledge. The rapidly advancing globalization makes the society more competitive. Enterprises that avoid the innovative investment are to expose themselves to danger. Australia is requested to make continued efforts for more innovative creation. (NEDO)

  20. Research into industrial technology policy trends in Australia. Role of government in promoting industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper reported the investigation into strategies of industrial technology, results of the R and D support plans, management of support fund plans, etc. by the Australian government. The present government introduced policies on industrial innovation and industrial technology, research and higher education, etc. from the end of 1997 to the end of 1999. Especially, recently the R and D preferential taxation system was introduced. As to organizations pertaining to science, technology, engineering and innovation, PMSEIC (prime minister's science, engineering and innovation council) under the direct control of prime minister is a top self-supporting organization, in which minister from each ministry join. Further, the assembly committee, which is not the bureaucratic organization, was separately established. In February 2000, the innovation summit was held, in which a lot of organizations from the industrial circle, government and research institutes participated. The conclusion was as follows: Australia is now at the crossroads of the resource dependent economy. The solution adopted in the past cannot meet the age of new knowledge. The rapidly advancing globalization makes the society more competitive. Enterprises that avoid the innovative investment are to expose themselves to danger. Australia is requested to make continued efforts for more innovative creation. (NEDO)

  1. Essence of institutional provision of industrial complex development

    Directory of Open Access Journals (Sweden)

    Yanenkova Iryna H.

    2014-01-01

    Full Text Available The article identifies and justifies the essence of institutional provision of the industrial complex development. It systemises and justifies main institutes of industrial complex of Ukraine. It marks a necessity of improvement of institutional structures, which influence activity and development of the industrial complex, that should go along the way of use of both market mechanisms and state regulation of functioning of links of the national innovation system. The article identifies main directions of organisational and institutional transformations in the industrial complex of Ukraine. It justifies expediency of shifting the focus of structural transformations in industry to the regional level and develops proposals with respect to distribution of authorities of state and regional bodies of authorities for the conduct of these reforms.

  2. Operational Research for Developing Countries - a case of transfer of technology

    DEFF Research Database (Denmark)

    Vidal, Rene Victor Valqui; Ravn, Hans V.

    1986-01-01

    This paper is concerned with some fundamental aspects of the process of transfer of operational research from the industrialized countries to the Third World. Two complementary conceptions of operational research are identified: technical and social operational research. The main contribution of ...... of this paper is to regard the discussion of operational research for developing countries as a case of transfer of technology. Finally, some proposals for action and further research will be briefly outlined.......This paper is concerned with some fundamental aspects of the process of transfer of operational research from the industrialized countries to the Third World. Two complementary conceptions of operational research are identified: technical and social operational research. The main contribution...

  3. The conceptual design of waste repository for radioactive waste from medical, industrial and research facilities containing comparatively high radioactivity

    International Nuclear Information System (INIS)

    Yamamoto, Masayuki; Hashimoto, Naro

    2002-02-01

    Advisory Committee on Nuclear Fuel Cycle Backend Policy reported the basic approach to the RI and Institute etc. wastes on March 2002. According to it, radioactive waste form medical, industrial and research facilities should be classified by their radioactivity properties and physical and chemical properties, and should be disposed in the appropriate types of repository with that classification. For the radioactive waste containing comparatively high radioactivity generated from reactors, NSC has established the Concentration limit for disposal. NSC is now discussing about the limit for the radioactive waste from medical, industrial and research facilities containing comparatively high radioactivity. Japan Nuclear Cycle Development Institute (JNC) preliminary studied about the repository for radioactive waste from medical, industrial and research facilities and discussed about the problems for design on H12. This study was started to consider those problems, and to develop the conceptual design of the repository for radioactive waste from medical, industrial and research facilities. Safety assessment for that repository is also performed. The result of this study showed that radioactive waste from medical, industrial and research facilities of high activity should be disposed in the repository that has higher performance of barrier system comparing with the vault type near surface facility. If the conditions of the natural barrier and the engineering barrier are clearer, optimization of the design will be possible. (author)

  4. The metalcasting industry and future research on the International Space Station

    International Nuclear Information System (INIS)

    Santner, Joe; Overfelt, Tony

    2000-01-01

    Fourteen million tons of castings are used annually in ninety percent of all manufactured goods and in all manufacturing machinery making metalcasting the manufacturing backbone of America. There are approximately 3,000 foundries located in 49 states directly providing employment to 200,000 people and indirectly supporting transportation, petrochemical, construction, and other end-user industries. The Solidification Design Center (SDC) began a pioneering effort to address metalcasting industry technical needs to maintain US global leadership in quality, price, and delivery. While individual companies have interacted in the past with the Auburn University SDC, eighty-percent of the foundries employ less than 100 individuals while only six-percent of the foundries employ more than 250 persons. The American Foundrymen's Society (AFS) formed the Solidification Design and Control Consortium to reach the small businesses in the U.S. metalcasting industry. Over a century of operation has proved the AFS committee structure to be a robust management tool. The recognized metalcasting industry technical needs and the unique opportunities that low earth orbit offers foundry process research are described in the present paper. In addition, the metalcasting approach to prioritize proposals, transfer technology developed within the small business community, and the metalcasting industry concerns regarding working with a government aerospace program are also discussed

  5. Research and development as a competence creating business in a business

    NARCIS (Netherlands)

    Fisscher, O.A.M.; Visscher, Klaasjan; Pearson, Alan; Weisenfeld, Ursula

    2001-01-01

    Research and development departments in industrial firms may not take it for granted anymore that they are the only preferred supplier of research and development to the company of which they are a part. The growing need to be innovative and the increasing availability of innovative competencies on

  6. R&D Characteristics and Organizational Structure: Case Studies of University-Industry Research Centers

    Science.gov (United States)

    Hart, Maureen McArthur

    2013-01-01

    Within the past few decades, university-industry research centers have been developed in large numbers and emphasized as a valuable policy tool for innovation. Yet little is known about the heterogeneity of organizational structure within these centers, which has implications regarding policy for and management of these centers. This dissertation…

  7. Research and technology management in the electricity industry methods, tools and case studies

    CERN Document Server

    Daim, Tugrul; Kim, Jisun

    2013-01-01

    Technologies such as renewable energy alternatives including wind, solar and biomass, storage technologies and electric engines are creating a different landscape for the  electricity industry. Using sources and ideas from technologies such as renewable energy alternatives, Research and Technology Management in the Electricity Industry explores a different landscape for this industry and applies it to the electric industry supported by real industry cases. Divided into three sections, Research and Technology Management in the Electricity Industry introduces a range of  methods and tools includ

  8. MATWIN: bridging the gap between academic research and industry.

    Science.gov (United States)

    Reiffers, Josy; Robert, Lucia

    2015-09-16

    MATWIN (Maturation and Accelerating Translation With INdustry) is part of the nationwide effort to support cancer innovation. This unique program is willing to support innovative research projects providing tools, resources, and staff dedicated to project leaders wishing to optimize the industrial attractiveness of their project. The overall objective is clear: fight cancer always more effectively.

  9. Academic Centers and/as Industrial Consortia: US Microelectronics Research 1976-2016

    NARCIS (Netherlands)

    Mody, Cyrus C.M.

    2017-01-01

    In the U.S., in the late 1970s and early 1980s, academic research centers that were tightly linked to the semiconductor industry began to proliferate – at exactly the same time as the first academic start-up companies in biotech, and slightly before the first U.S. industrial semiconductor research

  10. Influence of Psychological Factors on Product Development. Lessons from Aerospace and other Industries

    Science.gov (United States)

    Kamata, E. S.

    2002-10-01

    Product development is a major determinant of quality and cost as companies throughout the world struggle to optimize product development processes. Engineering tasks are usually implicitly assumed to be a primarily technical activity, but in reality they feature numerous nontechnical factors as well. This book focuses on the interrelationships of social, technical, and organizational aspects of the product development process. Cases observed in industry and research laboratories are presented and interpreted based on the socio-technical system approach (Emery / Trist) of examining the reciprocal relationship between the technical and the social subsystems. This book is primarily intended for engineering and quality professionals who want to know the limitations of current methods used in product development, to examine the so-called soft factors by means of grounded studies of their effect on R&D performance, not only to acknowledge the influence of soft factors but to actively consider their potential to improve the work environment. Academic researchers of the topic will also find many references and material for advanced courses on project and quality management. In addition to numerous cases from the aerospace industry, its general solution concepts are generalizable to other industries in which the high degree of product complexity necessitates effective interaction among different disciplines. The historical evaluation is neither intended for introductory purposes nor to propose a return to the past, but as a survey of the relevant factors to be applied in present and future projects. The author holds a degree in Electronics Engineering from the Instituto Tecnológico de Aeronautica, Brazil, as well as a PhD in Administration Sciences from the Swiss Federal Institute of Technology in Zurich, Switzerland. He draws on profound academic research as well as a wealth of practical experience in avionics, telecommunications, systems control, and the space industry

  11. The Development of Indonesian Labour Market Information System (LMIS) for Vocational Schools and Industries

    Science.gov (United States)

    Parinsi, M. T.; Palilingan, V. R.; Sukardi; Surjono, H. D.

    2018-02-01

    This paper is aim to developing Information system for the labor market which specifically linking vocational schools (SMK) graduates and industries. The methods of this application using Research and Development (R&D) from Borg and Gall conducting in North Sulawesi Province in Indonesia. The result are reliable and acceptable for the graduate students. The Labor Market Information system (LMIS) can help the industries to find a labor/graduates that matched with the company requirement at a real time. SMK may have a benefit by extracting the Information from the application, they can prepare their students for the specific work in the industries. The next development of the application will designed to be available not only for the SMK graduate students.

  12. Development of a web based instrument on higher education structures of industrial engineering

    OpenAIRE

    Tarba Ioan-Cristian

    2017-01-01

    The research and development of assisted operational instruments on higher education structures of industrial engineering represent a continuous and complex process. The present paper contributes to the building up of support elements and an assisted operational instrument on higher education structures of industrial engineering, with focus on the specific curricula. The use of tested and validated constructive solutions from other projects, as base for the new design, reduces the design time.

  13. Reformational direction of fish industry development in Ukraine

    Directory of Open Access Journals (Sweden)

    Yu. Glebova

    2017-12-01

    Full Text Available Purpose. Exploitation of aquatic bioresources in Ukraine was traditionally low. In order to provide the population of Ukraine with high-quality fish products, the task of fish industry workers in the country is to create appropriate conditions for increasing fish catches and improve the organization of labor and material provision at fish farms. Our immediate goal in the work was to identify the areas of reforms in the fish industry, which would ensure the progress in it and would be aimed at attracting investments in aquaculture, establishing fish protection bodies with a qualitative change in their working principles, forming a culture of socially responsible fishing, achieving transparency and openness in the work of the State Agency for Fisheries, as well as improving the efficiency of the functioning of state institutions. Methodology. The basis of the research is the scientific, statistical and reporting data in the fish industry of Ukraine. The research uses the methods of monitoring and retrospective analysis of recent research and publications. Findings. The information on the implementation of reforms in the field of fish industry in Ukraine is presented: change of territorial bodies, State Fisheries Agency, fisheries regimes, use of aquatic biological resources, regulatory framework, strengthening of international activities and use of foreign experience. In order to increase the capacity of the fish industry, it is being reformed in the direction of changing its structure, increasing funding, introducing foreign investment and using their expertise. Originality. The need for reforming the fish industry of Ukraine became highly important. Modern socio-economic conditions require changes in the approaches to the organization of the activity of f groups that are marked by significant technological, economic, organizational, regulatory and legal peculiarities that need to be taken into account in economic processes. In accordance with

  14. NSERC's research and industrial community: a growing force of discovery, people and innovation shaping tomorrow's hydrogen economy

    International Nuclear Information System (INIS)

    Therrien, R.

    2009-01-01

    'Full text': As Canada's largest university research-funding agency, the Natural Sciences and Engineering Research Council of Canada (NSERC) supports the training of some 26,500 university students and postdoctoral fellows, funds the research efforts of more than 11,800 university and college professors and stimulates academic-industry research and development (R and D) partnerships involving over 1,400 companies each year. In the hydrogen and fuel cell arena, NSERC has sponsored cutting edge research for over two decades. During that time, the level of activity has intensified significantly - from a mere handful of projects in the early 1980s and 1990s, to more than 150 grants and scholarships in 2008. Since 2002, NSERC's annual support has tripled from about $2.9 million to over $9 million. More than half of that investment is earmarked for university-industry projects involving over 40 fuel cell and hydrogen business interests. NSERC supports hydrogen advances through its Discovery Grants for basic research, Research Partnerships Programs' grants for research and knowledge transfer involving companies, and scholarships and fellowships for skills development. All of these initiatives provide advanced training for students at the post-graduate level, resulting in job-ready professionals who will help shape tomorrow's hydrogen economy. In 2007, NSERC doubled its funding for strategic research partnerships in the area of sustainable energy systems, including hydrogen-related R and D. These public-private partnerships permit companies to capitalize, at minimal cost, on university innovations and training. In addition to supporting project-specific partnerships, the new funds enabled the creation of several national networks that unite industrial and research interests engaged in fuel cell advancement on the one hand, and in hydrogen technologies on the other. The partnership opportunities that exist at NSERC will be briefly described and examples of successful

  15. Curriculum Development Based On INQF and Business/Industries Sector for Improvement Competency of Basic Pattern Making Students at Vocational High School

    Science.gov (United States)

    Nilasari, Yoni; Dasining

    2018-04-01

    In this era of globalization, every human resource is faced with a competitive climate that will have a major impact on the development of the business and industrial sector. Therefore it is deemed necessary to research the development of curriculum based on INQF and the business/industries sector in order to improve the competence of Sewing Technique for Vocational High School Students of fashion clothing program. The development of curricula based on INQF and the business/industries is an activity to produce a curriculum that suits the needs of the business and industries sector. The formulation of the problem in this research are: (1) what is the curriculum based on INQF and the business/industries sector?; (2) how is the process and procedure of curriculum development of fashion program profession based on INQF and the business/industries sector?; And (3) how the result of the curriculum of fashion expertise based on INQF and the business/industries sector. The aims of research are: (1) explain what is meant by curriculum based on INQF and business/industries sector; (2) to know the process and procedure of curriculum development of fashion program profession based on INQF and the business/industries sectors ; And (3) to know result the curriculum of clothing expertise based on INQF and the business/industries sector. The research method chosen in developing curriculum based on INQFand business/industry sector is using by 4-D model from Thiagarajan, which includes: (1) define; (2) design; (3) development; And (4) disseminate. Step 4, not done but in this study. The result of the research shows that: (1) the curriculum based on INQF and the business/industries sector is the curriculum created by applying the principles and procedures of the Indonesian National Qualification Framework (INQF) that will improve the quality of graduates of Vocational High School level 2, and establish cooperation with Business/industries as a guest teacher (counselor) in the

  16. 77 FR 70167 - Draft Guidance for Industry on Vaginal Microbicides: Development for the Prevention of Human...

    Science.gov (United States)

    2012-11-23

    ...] Draft Guidance for Industry on Vaginal Microbicides: Development for the Prevention of Human...: The Food and Drug Administration (FDA) is announcing the availability of a draft guidance for industry... Drug Information, Center for Drug Evaluation and Research, Food and Drug Administration, 10903 New...

  17. Recent developments: Industry briefs

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This article is the 'Industry Briefs' portion of Nuexco's July 1992 'Recent Developments' section. Specific items mentioned include: (1) the merger of Entergy and Gulf States Utilities, (2) restart of the Sequoyah Fuels facility in Oklahoma, (3) development of the 7th and 8th nuclear units in Taiwan, (4) purchase of interest in Rio Algom, Ltd, and (5) acquisition of the Italian firm AGIP by a Canadian company

  18. THE IMPORTANCE OF CLUSTERS IN THE DEVELOPMENT OF THE TEXTILE AND CLOTHING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Adriana GÎRNEAŢĂ

    2013-12-01

    Full Text Available This paper provides a critical review of current research on clusters in the textile and clothing industry and the connection to the development of the areas they are concentrated in. The study aims to systemize the main concepts and theoretical research regarding clusters, offering insights into the way clusters determine a more efficient and competitive industry and to what extent. In the current continuous competition for markets, companies that seek economic success need to intensify relations with others that activate in similar fields of interest but also with educational institutions, research and development, government and other economic actors involved. Clusters prove to be a successful solution for small and medium companies because these provide cooperation between companies and institutions, easy and fast access to information and facilitate cooperation in different stages of production and selling a product like acquisition of technology and equipment intended for shared use or marketing strategies.

  19. Establishment of comprehensive promotion plan for utilization, research and development of radiation and radioisotopes

    International Nuclear Information System (INIS)

    Choi, Young Myung; Kim, H. J.; Ham, C. H.; Yang, M. H.; Chung, W. S.; Park, K. B.; Jin, J. H.; Song, H. S.; Nho, Y. C.; Byun, M. W.; Kim, J. R.; Han, H. S.; Chung, Y. S.; Yun, P. M.; Lee, H. Y.; Seo, K. W.; Chang, S. Y.; Kee, S. R.; Lhu, S. R.; Choi, Y. S.

    1997-05-01

    This study surveys state-of-art radiation/RI industries and research organizations and their activities. The major objective of the survey is to collect useful information on the status of these industries, discuss issues concerning radiation /RI utilization. We, therefore, send questionnaires to field workers engaged in RI industries and research organizations to feedback on real field issues and problems. Considering the specificity and diversity of the radiation / RI area, six sectors are set up for its promotion. Each sector includes status analysis, active promotion measures and implementation plans. Six areas are as follows; 1) systematic developments of radiation /RI utilization technologies covers technology development for industrial applications, technology development for agricultural applications, technology development for medical applications, development of RI and radiation generators, and expansion of infra-structure for enhancement of radiation / RI utilization, and fostering radiation science. 2) activation of radiation / RI indusries 3) rationalization of radiation / RI regulation 4) international cooperation, 5) manpower development 6) finance. (author). 14 refs., 34 tabs., 5 figs

  20. FORMATION OF ECONOMIC MECHANISM OF INDUSTRIAL ENTERPRISE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Shestakova E. V.

    2015-06-01

    Full Text Available Now in research of social and economic systems synergy approach according to which the entity represents the open self-organizing (spontaneous system gains ground. Such representation of the entity in the context of modern economic science requires development of new mechanisms and management tools. The purpose of researches in the sphere of synergy management is development of mechanisms of self-organization, and also information filling of its elements. Complexity of processes of self-organization dictates need of integration of separate types of the mechanisms differing on a method of creation, uniformity of elements, complexity, a strategic orientation, target orientation, management functions. Thus, the integrated mechanism of self-organization of the entity represents multi-level system of the interconnected mechanisms (organizational, economic, information, motivational differentiated on elements. In article content of the economic development mechanism of the entity reveals; its purposes, subjects, objects, the principles, methods, tools and resources are considered. On the basis of research of features of development of social and economic systems the ratio of stages of enterprise lifecycle with self-organization process stages is established. The principles of the economic development mechanism of the entity are proved: financial independence, self-sufficiency, economic feasibility, responsibility, resource capability, economic control, interest. Methods of the economic mechanism (planning and forecasting, marketing activity, economic diagnostics, financial credit policy, economic incentives are allocated and the tools corresponding to them are proved. Features of sale of the economic mechanism at stages of dynamic balance and bifurcation are established. The practical importance of results of research consists in development of development mechanisms of the industrial enterprises promoting achievement of long-term competitive

  1. National Nanotechnology Initiative. Research and Development Supporting the Next Industrial Revolution. Supplement to the President’s 2004 Budget

    Science.gov (United States)

    2004-01-01

    and Development Supporting the Next Industrial Revolution Supplement to the President’s FY 2004 Budget National Science and Technology Council...potential to profoundly change our economy, to improve our standard of living, and to bring about the next industrial revolution . Nanotechnology: From

  2. IFM – SCIENTIFIC CENTRE OF THE DEVELOPMENT OF THE UKRAINIAN METALLURGICAL INDUSTRY

    Directory of Open Access Journals (Sweden)

    BOLSHAKOV V. I.

    2017-01-01

    Full Text Available The history of creation and development of the Institute of ferrous metallurgy of the Ukrainian Academy of Sciences named after Z. I. Nekrasov is regarded in the article. IFM has become the scientific centre of the development of the metallurgical industry of Ukraine. Researches of the outstanding scientists show their significant contribution in the development of the metallurgical science and implementation of their achievements in the production of the metallurgical industry of Ukraine. Analysis of publications. History of the Institute of the ferrous metallurgy is regarded in the fundamental works devoted to the development of the metallurgical industry in Ukraine and in the works published to the jubilee dates of the prominent scientists academicians Z. I. Nekrasov, V. I. Bol’shakov and others. The purpose of the article is to analyze the process of the creation of the Institute and the stages of its development in the 20th and 21st centuries and to define the influence of the economic and political situation in the country upon this process? To regard the role of the outstanding scientists and influence of their achievements on the development of the metallurgical industry of Ukraine. The history of IFM began in 1939 when it was organized in Kharkiv as a part of the Academy of Sciences of Ukraine. At the beginning of the Great Patriotic war the Institute was moved to Ufa – the capital of Bashkiria. During the war the scientists of the Institute tried to increase the output of metal and special steels for the defence industry. In 1943 the Institute moved to Moscow and then to Kiev. In 1952 it was decided to move the Institute to Dnepropetrovsk. In order to combine the scientific researches and production of metal. Z. I. Nekrasov was elected Director of the Institute. The departments of the Indtitute were headed by academicians Z. I. Nekrasov, A. P. Chekmariov, K. F. Starodubov, Correspondence Members of the Ukrainian Academy of Sciences

  3. The development of public and private construction procurement systems in the Malaysian construction industry

    Directory of Open Access Journals (Sweden)

    Mastura Jaafar

    2012-12-01

    Full Text Available As demand on building construction projects rises, various procurement methods have been adapted to suit with unique project requirements. However, poor industry performance and rapid developments within it indicate the need for a research on the procurement systems in the industry. In order to explore the development of procurement systems in Malaysia, a discussion on different economic phases which influence the routes of procurement systems and its evolution in Malaysia's construction industry is initiated. Subsequently, based on a questionnaire survey collected from 73 public and 68 private parties, the significant and dominant role of traditional procurement system used by both the public and private sectors in Malaysia can be confirmed. Further, compared to the public sector, the private sector is observed to be more aggressive in adapting alternative systems such as design and build (D&B and Turnkey. Further elaboration on the research findings is covered in the discussion section.

  4. International Collaboration Tools for Industrial Development

    CSIR Research Space (South Africa)

    Dan, Nagy

    2017-10-01

    Full Text Available - EU Horizon 2020 RISE program Goal: A great challenge for the future lies in the transfer of Industry 4.0 expertise and technologies in small and medium sized enterprises (SME). Although the high potential of Industry 4.0 in SMEs, the main limit... lies in a lack of concrete models for its implementation and application in small and medium enterprises. Thus, this research project titled “SME 4.0 - Smart Manufacturing and Logistics for SMEs in an X-to-order and Mass Customization Environment...

  5. Gender | Page 212 | IDRC - International Development Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Research evidence is supporting the notion that involving women, along with ... The Centre has long valued industry, trade, and commerce as engines of economic growth. From its own practical support for private sector development, IDRC has ... du rôle joué par l'agriculture dans cette ville dynamique d'Afrique de l'Est.

  6. Research and innovation to overcome the 'barriers'. The technological and industrial challenges of carbon-free energy

    International Nuclear Information System (INIS)

    Therme, Jean

    2011-01-01

    The world energy scene has undergone a thoroughgoing change in less than twenty years. It is ready for a new revolution based on the massive introduction of renewable energy sources along with the associated technology and, also, on ever smarter energy networks for managing supply and demand. As industrial and economic competition intensifies, innovation will be a key factor for winning this battle. Given its worldwide industries and topnotch research centers, France has a few aces up its sleeve. The country has to focus on industrial chains of production, research and innovation; and choose to back those of excellent quality that will help make it a world leader. The examples of photovoltaic conversion and batteries are cited, two fields that France must continue supporting and developing

  7. Atoms in Industry: Rays of hope for development

    International Nuclear Information System (INIS)

    Viegas, Luciana

    2015-01-01

    What are the uses of radiation technology, and what benefits does it bring to our lives? The public has little awareness of how widespread the use of nuclear techniques is beyond the generation of power and cancer therapy. This year’s Scientific Forum, to be held on 14 and 15 September 2015 on the margins of the 59th IAEA General Conference, will showcase how radiation technologies are used in a broad range of industries. Entitled ‘Atoms in Industry — Radiation Technology for Development’ and bringing together experts, industry leaders and researchers, the Forum will examine best industry practices from around the globe and serve as a platform to exchange ideas on how these technologies can be applied to propel development efforts. “Helping countries to benefit from the peaceful use of nuclear technology is a central area of the IAEA’s work. Our assistance covers areas including human and animal health, food security, water management, electricity generation, and environmental protection — to name just a few,” said IAEA Director General Yukiya Amano. In 2014, over 130 countries received support through the IAEA’s technical cooperation programme, and while nuclear technology is often equated with nuclear power in the eyes of the general public, 80% of IAEA Member States are in fact non-nuclear power countries.

  8. Industry - An Urban Developer. Case Study: Iron and Steel Industry in Romania

    Directory of Open Access Journals (Sweden)

    Radu SĂGEATĂ

    2013-06-01

    Full Text Available The profound economic and social changes that took place during the period of transition from a central-based economy to the market system have deeply marked the evolution of industrial towns, particularly those targeted for heavy industry development between 1950 and 1989. The present paper analyses this model of urban evolution affected by the interference of the political-ideological factor. Three towns, Galaţi, Târgovişte and Oţelu Roşu, in which a strong iron-and-steel industry was planted, have been taken into the study. Galaţi – a large town with complex functions, a regional and crossborder polarization center, was singled out for this type of industry by political decision within the context of the industrialization drive of the 1950s; Târgovişte – an old middle urban center, was pushed into the iron-and-steel route in the 1970-1980 decade. Oţelu Roşu – a small town, has a traditional iron-and-steel industry based on local raw material resources. Relying on historical documents, bibliographical sources and field work, the author correlates urban development evolutions with the industrialization policies, highlighting the causes that have led to the present decline of these towns and the challenges facing the local authorities in revitalizing them in a sustainable manner.

  9. Marketing alcohol to young people: implications for industry regulation and research policy.

    Science.gov (United States)

    Jackson, M C; Hastings, G; Wheeler, C; Eadie, D; Mackintosh, A M

    2000-12-01

    This paper focuses on the marketing of alcohol to young people in the United Kingdom, but the lessons that emerge have international significance. Alcohol is a global enterprise and recent consolidation means that it is controlled by a decreasing number of expanding multi-nationals. Alcohol companies are able to allocate significant resources to researching consumer preferences, developing new products and promoting them on an international level. Recent years have seen a growth in the value that youth culture attaches to brand labels and symbols and a move away from the healthy-living ethos. The alcohol industry's response to these trends has been to design alcoholic beverages that appeal to young people, using well-informed and precisely targeted marketing strategies. This has led to growing concerns about the implications for public health and a demand for tighter controls to regulate alcohol marketing practices. In the United Kingdom, controls on alcohol are piecemeal and reactive and the current system of voluntary regulation appears ineffective. This paper argues for more research to establish current industry practice and inform the development of a comprehensive regulatory structure and system of monitoring.

  10. Research by industry at the National Synchrotron Light Source

    International Nuclear Information System (INIS)

    1995-05-01

    The world's foremost facility for research using x-rays and ultraviolet and infrared radiation, is operated by the National Synchrotron Light Source dept. This pamphlet described the participating research teams that built most of the beam lines, various techniques for studying materials, treatment of materials, and various industrial research (catalysis, pharmaceuticals, etc.)

  11. Research Investments and Market Structure in the Food Processing, Agricultural Input, and Biofuel Industries Worldwide

    OpenAIRE

    Fuglie, Keith O.; Heisey, Paul W.; King, John L.; Day-Rubenstein, Kelly A.; Schimmelpfennig, David E.; Wang, Sun Ling

    2011-01-01

    Meeting growing global demand for food, fiber, and biofuel requires robust investment in agricultural research and development (R&D) from both public and private sectors. This study examines global R&D spending by private industry in seven agricultural input sectors, food manufacturing, and biofuel and describes the changing structure of these industries. In 2007 (the latest year for which comprehensive estimates are available), the private sector spent $19.7 billion on food and agricultural ...

  12. Method æ, the agile software development method tailored for the pharmaceutical industry.

    NARCIS (Netherlands)

    Hajou, A.; Batenburg, R.S.; Jansen, S.

    2015-01-01

    Agile software development methods have a high adoption rate due to their proven business benefits. Its success has not yet been identified in the pharmaceutical industry, due to the industry’s incompatibility with generic agile methods. Comprehensive research has been done to engineer a tailored

  13. PTAC 2002 annual report : creating value through innovation : facilitating innovation, technology transfer, and collaborative research and development in the upstream oil and gas industry

    International Nuclear Information System (INIS)

    2003-01-01

    Petroleum Technology Alliance Canada (PTAC) is Canada's leading organization that helps in the development and transfer of petroleum technology. This annual report listed the key accomplishments of PTAC in 2002. These include a record participation in PTAC workshops and conferences, the co-hosting of the world's largest unconventional gas and coalbed methane conference with the Canadian Society for Unconventional Gas, and the co-hosting of a conference on climate change and greenhouse gas technology with Climate Change Central. In 2002 PTAC launched an Industrial Energy Audit Incentive with Natural Resources Canada. It also proposed an extension to its mandate to help energy efficiency and greenhouse gas technologies for the hydrocarbon energy industry. In addition, PTAC helped launch 32 research and development projects in 2002. PTAC expects that 2003 will see a shift in focus to sustainable, eco-efficiency and greenhouse gas-reducing technologies for the hydrocarbon energy industry. This annual report includes an auditor's report of PTAC's financial statements. The report includes summarized balance sheet of assets, liabilities/surplus and net assets. It also includes summarized statements of revenues, expenses and surplus for the year ended December 31, 2002 with comparative figures for 2001. 1 tab., 2 figs

  14. Development of Eco-Industry Sector

    OpenAIRE

    Mariana Ioviţu

    2012-01-01

    Measures to encourage development of Eco-industries represent an important part of the programs of many countries; analyses of different international organisms reveal a series of advantages of this sector for economy. According to OCDE “The environmental goods and services industry consists of activities which produce goods and services to measure, prevent, limit, minimize or correct environmental damage to water, air and soil, as well as problems related to waste, noise and Eco-systems”. Th...

  15. AMTEX: A university, government, industry, partnership

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, L.J. [Auburn Univ., AL (United States); Cheatham, R.L. [Pacific Northwest Lab., Richland, WA (United States); Peskin, A.M. [Brookhaven National Lab., Upton, NY (United States)

    1993-12-01

    The AMTEX Partnership is a research and development collaboration between the US Department of Energy (DOE), the DOE`s multiprogram laboratories, universities, and the integrated textile industry. The integrated industry includes fibers, textiles, apparel, and other fabricated products. The goal of AMTEX is to strengthen the competitiveness of this vital industry and thereby preserve and create new jobs. AMTEX is a role model for government, industry and universities working together to achieve a specified goal. Under the oversight of the Laboratory Technology Transfer Program in DOE`s Office of Energy Research, the multiprogram laboratories, universities and industry are pursuing a broad, industry-driven research agenda. It combines the research and development capabilities of industry and universities with the unique expertise and facilities of the DOE laboratory system.

  16. Alcohol research and the alcoholic beverage industry: issues, concerns and conflicts of interest.

    Science.gov (United States)

    Babor, Thomas F

    2009-02-01

    Using terms of justification such as 'corporate social responsibility' and 'partnerships with the public health community', the alcoholic beverage industry (mainly large producers, trade associations and 'social aspects' organizations) funds a variety of scientific activities that involve or overlap with the work of independent scientists. The aim of this paper is to evaluate the ethical, professional and scientific challenges that have emerged from industry involvement in alcohol science. Source material came from an extensive review of organizational websites, newspaper articles, journal papers, letters to the editor, editorials, books, book chapters and unpublished documents. Industry involvement in alcohol science was identified in seven areas: (i) sponsorship of research funding organizations; (ii) direct financing of university-based scientists and centers; (iii) studies conducted through contract research organizations; (iv) research conducted by trade organizations and social aspects/public relations organizations; (v) efforts to influence public perceptions of research, research findings and alcohol policies; (vi) publication of scientific documents and support of scientific journals; and (vii) sponsorship of scientific conferences and presentations at conferences. While industry involvement in research activities is increasing, it constitutes currently a rather small direct investment in scientific research, one that is unlikely to contribute to alcohol science, lead to scientific breakthroughs or reduce the burden of alcohol-related illness. At best, the scientific activities funded by the alcoholic beverage industry provide financial support and small consulting fees for basic and behavioral scientists engaged in alcohol research; at worst, the industry's scientific activities confuse public discussion of health issues and policy options, raise questions about the objectivity of industry-supported alcohol scientists and provide industry with a

  17. 507 Developing Industrial and Technological Manpower via ...

    African Journals Online (AJOL)

    sustainable industrial and technological advancement and security for national development. ... industrial/technological manpower for Nigeria is the technical vocational education and ..... Business and Social Sciences, 2 (2), 71-77. Retrieved ...

  18. Value of pharmaceuticals: ensuring the future of research and development.

    Science.gov (United States)

    Serajuddin, Hamida K; Serajuddin, Abu T M

    2006-01-01

    To analyze the current situation under which the pharmaceutical industry is criticized for the production of drugs with potential adverse effects, the high prices of medicines, and aggressive marketing practices, and to provide a proposal to rectify the situation. Published books, pharmaceutical journals, Web of Science database using the search terms pharmaceutical, research, development, marketing, cost, and the Food and Drug Administration (FDA) Web site. Most breakthroughs in the treatment of diseases and prolongation of lives have come about through pharmaceuticals discovered and developed by the pharmaceutical industry. While the process of discovering and developing new pharmaceuticals is lengthy, costly, and lacking any assurance of success, investment in research and development by the U.S. pharmaceutical industry has increased progressively, reaching 51.3 billion dollars in 2005. Yet the annual number of FDA approvals of new molecular entities (NMEs) has gradually decreased over the past 10 years. Additionally, a large part of the patent life of a successful NME is consumed during this lengthy development phase. Few businesses, if any, have such long product gestation lives and risks. For these reasons, the pharmaceutical industry is often in a rush to recoup its investment before the product's patent expires, and this is the root cause of many criticisms against the pharmaceutical industry. To rectify the current situation, a new system is proposed under which innovator pharmaceutical companies would be allowed royalties for their products after the expiration of patents, in a manner similar to the way in which other intellectual properties (such as books, music, films) are protected by copyright. Such a system would allow pharmaceutical companies to continue research on new pharmaceutical products unimpeded by the patent clock. Given appropriate legislative or other facilitatory actions, a royalty-based system for the marketing of generic products after

  19. The use of participant-observation protocol in an industrial engineering research.

    Science.gov (United States)

    Silveira e Silva, Renato da; Sznelwar, Laerte Idal; D'Afonseca e Silva, Victor

    2012-01-01

    Based on literature, this article aims to present the "participant-observation' research protocol, and its practical application in the industrial engineering field, more specifically within the area of design development, and in the case shown by this article, of interiors' design. The main target is to identify the concept of the method, i.e., from its characteristics to structure a general sense about the subject, so that the protocol can be used in different areas of knowledge, especially those ones which are committed with the scientific research involving the expertise from researchers, and subjective feelings and opinions of the users of an engineering product, and how this knowledge can be benefic for product design, contributing since the earliest stage of design.

  20. Basic research on energy conservation in developing countries. Joint research on oil conservation (research report on the industrial basis of Socialist Republic of Vietnam); Hatten tojokoku energy shohi koritsuka kiso chosanado jigyo sekiyu shohi koritsuka kyoryoku chosa. Betonamu shakai shugi kyowakoku sangyo kiso chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The field research of oil conservation was conducted in developing countries, in particular, Vietnam where a steep increase in oil consumption is anticipated in the future. Energy conservation is the most effective direct measures to control combustion of fossil fuels, and an important issue to be promoted by all countries in the world to prevent global warming and reserve energy resources. In fiscal 1994, main industries in the northern part of Vietnam were researched. In fiscal 1995, the report meeting of plant survey results in the northern part and the technical seminar of energy-saving in industrial field were held, and plants around Ho Chi Minh City in the southern part of Vietnam were researched. Although Vietnam has recently acquired membership in ASEAN and is undergoing dramatic economic growth, has many problems in environmental measures. Japan has top-ranking results on energy-saving in industrial field, and the transfer of such superior technologies and techniques will greatly contribute to resource and global warming problems as well as pollution control measures in Vietnam. 13 refs., 25 figs., 26 tabs.

  1. Research and development project for industrial and scientific technologies in fiscal 1999. An achievement report on research and development of quantization functioning elements (surveys and studies on technological trends); 1999 nendo ryoshika kino soshi no kenkyu kaihatsu seika hokokusho. Gijutsu doko chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In order to serve for research and development of quantization functioning elements, surveys have been made on research activities related to ancillary technologies and related technologies for the quantization functioning element project. This paper summarizes the status of researches in each field and the technological trends therein with regard to theoretical and experimental development activities on new silicon-based and compound-based elements in the quantization functioning element project, generalization of the current status of the project as a whole, and the prospects thereon. Regarding the current status and future of the quantization functioning elements, the paper describes the causes for the decline of the Japanese semiconductor industry, and discussions on strategies for revitalization of the semiconductor industry. The paper also describes the followings: the current status of the compound-based quantization functioning element project, design methods for quantization functioning elements using silicon as the base and the ultimate single electron integrated circuits, the current status and problems of the compound-based quantization functioning elements, circuit and system technologies related to quantization functioning elements, proposals on silicon nano-devices and neo-silicon, and the future prospects on silicon- based quantum effect devices and single electron devices, and compound semiconductor devices. (NEDO)

  2. The evolution and consolidation of the timeshare industry in a developing economy: The South African experience

    Directory of Open Access Journals (Sweden)

    Wayde R. Pandy

    2014-07-01

    Full Text Available The timeshare industry is one of most under-researched aspects of tourism accommodation. Within existing scholarship most writings pertain to industry development and challenges in the USA and Europe. This paper provides an examination of the evolution and consolidation of the timeshare industry in South Africa from the 1980s to the present-day. The South African timeshare industry is revealed as one of the most mature in the international timeshare economy. Historically, the industry confronted parallel challenges to those in developed countries in respect of adapting the product to local conditions and confronting a tarnished image from the impact of unscrupulous developers. Currently the South African timeshare sector faces different challenges including service management and consumer dissatisfaction, marginalization within the tourism economy, and the need to address the emerging Black middle class market.

  3. Industrialized Information Systems Development

    DEFF Research Database (Denmark)

    Havn, Erling; Bansler, Jørgen P.

    1996-01-01

    The production of application software is rapidly being industrialized. Computer manufacturers and software houses produce a rapidly growing number of generic software applications and systems, and more and more user companies choose to build their computer-based information systems...... with such generic products, instead of custom made software. We discuss how the move away from traditional in-house development and the increasing use of generic software is likely to transform IS development in the near future. We conclude that these developments will make new demands on the information systems...

  4. Developing finance to meet energy industry challenge

    International Nuclear Information System (INIS)

    Morphett, C.

    1994-01-01

    The role of commercial financial institutions in the development of the world's oil and gas industry are charted in this article. Banks and other institutions have been lending money to the oil industry since the late 1920s. In the early days loans were short-term, but as the oil and gas industries have developed, using deeper wells and more complex technology, financial needs too have expanded. Better forecasting of future recovery levels, and a better understanding of reservoir characteristics has meant that lending institutions have advanced funds against projected oil revenues, with repayments due only as oil production comes on-line. (UK)

  5. Fostering the local production and application of industrial radiotracers in developing countries - IAEA's role

    International Nuclear Information System (INIS)

    Mohammad Haji-Saeid, S.; Jin, Joon-Ha; Ramamoorthy, Natesan; )

    2006-01-01

    Radiotracer techniques provide fast and accurate information for solving various process problems in industrial plants. The IAEA is playing an important role in supporting the development and transfer of radiotracer techniques to developing countries. The IAEA has implemented 5 coordinated research projects (CRP), including two on-going projects, in the field of radiotracer and sealed source applications in industry. The CRPs facilitated the acquisition and dissemination of know-how and technology for wear/corrosion measurement, residence time: distribution (RTD) study, validation of computed fluid dynamics data, industrial process tomography and inter-well connectivity study. A number of technical cooperation projects have been executed to strengthen the capability of radiotracer groups in developing Member States and to create awareness in the industries about the technical and economical benefits of radiotracer technology. The IAEA's regional projects have strongly impacted the transfer and adoption of the techniques. The status of radiotracer use in developing countries reveals that the lack of timely availability of radiotracers as one of the major problems. Development of some radionuclide generators is a possible solution. Cooperation among the international radiotracer communities is necessary to enhance the availability and use of radiotracers in developing countries. (author)

  6. Tendencies of development of defensive-industrial complex of lead nations of the world

    Directory of Open Access Journals (Sweden)

    O. F. Salnikova

    2014-11-01

    Full Text Available In the article the analysis of development of defensive-industrial complex of lead nations of the world is conducted , namely the United States of America and countries-participants of European Union and NATO. Also in the the article control system of the defensive-industrial policy of the USA is schematically represented. The analysed materials gave an opportunity to draw conclusion, that guidance of military industrial concerns of the USA managed clearly to define acceptable strategies of restructuring and successfully to realize them, integrating new enterprises with the use of front-rank methods of organizational management that became the basic engine of development of defensive industry of the USA. To the number of basic progress of defensive-industrial complex of lead nations-participants of NATO and EU trends it is possible to take the following: creation of the large defensive-industrial integrated structures on development and production of modern armament and military technique on national, transnational and transatlantic levels; rapprochement of military and civil sectors of economy; large corporations go across from mass to the «flexible» production, due to what it is possible to arrive at high efficiency of production of weapons and military equipment even at small series; through diminishing of volumes of assignations on the purchase of defensive products and considerable complication of the modern systems of armament, some leading defensive firms-contractors began to work from the production of armament and military technique to scientific research-and-developments.

  7. USU Alternative and Unconventional Energy Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    Behunin, Robert [Utah State Univ., Logan, UT (United States); Wood, Byard [Utah State Univ., Logan, UT (United States); Heaslip, Kevin [Utah State Univ., Logan, UT (United States); Zane, Regan [Utah State Univ., Logan, UT (United States); Lyman, Seth [Utah State Univ., Logan, UT (United States); Simmons, Randy [Utah State Univ., Logan, UT (United States); Christensen, David [Utah State Univ., Logan, UT (United States)

    2014-01-29

    The purpose and rationale of this project has been to develop enduring research capabilities at Utah State University (USU) and the Utah State University Research Foundation (USURF) in a number of energy efficient and renewable energy areas including primarily a) algae energy systems, b) solar lighting, c) intuitive buildings, d) electric transportation, 3) unconventional energy environmental monitoring and beneficial reuse technologies (water and CO2), f) wind energy profiling, and g) land use impacts. The long-term goal of this initiative has been to create high-wage jobs in Utah and a platform for sustained faculty and student engagement in energy research. The program’s objective has been to provide a balanced portfolio of R&D conducted by faculty, students, and permanent staff. This objective has been met. While some of the project’s tasks met with more success than others, as with any research project of this scope, overall the research has contributed valuable technical insight and broader understanding in key energy related areas. The algae energy systems research resulted in a highly productive workforce development enterprise as it graduated a large number of well prepared students entering alternative energy development fields and scholarship. Moreover, research in this area has demonstrated both the technological and economic limitations and tremendous potential of algae feedstock-based energy and co-products. Research conducted in electric transportation, specifically in both stationary and dynamic wireless inductive coupling charging technologies, has resulted in impactful advances. The project initiated the annual Conference on Electric Roads and Vehicles (http://www.cervconference.org/), which is growing and attracts more than 100 industry experts and scholars. As a direct result of the research, the USU/USURF spin-out startup, WAVE (Wireless Advanced Vehicle Electrification), continues work in wirelessly charged bus transit systems

  8. Report on survey in fiscal 2000 on the survey on succession of history of industrial technologies. Survey edition of industrial technologies in Japan that have contributed largely to development of industries; 2000 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Surveys and researches have been performed to serve as reference for the future research and development policies by clarifying the innovation process of industrial technologies in Japan and the originality and creativity seen in that process. The surveys have focused on processes born in Japan and evaluated as 'world class' in significance of some kind, and summarized the technology history. The current fiscal year has surveyed newly the following nine processes: industrialization of the sodium glutamate and fructose manufacturing technologies, development of solar cell technologies, industrialization of the manufacturing process of cyclohexnol via cyclohexene, development of the MEK manufacturing process, development and industrialization of hollow fiber reverse osmosis membrane modules for single stage sea water desalination, development and industrialization of the new vitamin B1 intermediate process, development of HSG-Si capacitors for semiconductor memories, and development and industrialization of 4-ethylene fluoride/ethylene copolymer (ETFE). The surveys are considered to have obtained the results abound in suggestions toward original and creative technological developments. (NEDO)

  9. Applied research and development of neutron activation analysis

    International Nuclear Information System (INIS)

    Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Baek, Sung Ryel; Kim, Young Gi; Jung, Hwan Sung; Park, Kwang Won; Kang, Sang Hun; Lim, Jong Myoung

    2003-05-01

    The aims of this project are to establish the quality control system of Neutron Activation Analysis(NAA) due to increase of industrial needs for standard analytical method and to prepare and identify the standard operation procedure of NAA through practical testing for different analytical items. R and D implementations of analytical quality system using neutron irradiation facility and gamma-ray measurement system and automation of NAA facility in HANARO research reactor are as following ; 1) Establishment of NAA quality control system for the maintenance of best measurement capability and the promotion of utilization of HANARO research reactor 2) Improvement of analytical sensitivity for industrial applied technologies and establishment of certified standard procedures 3) Standardization and development of Prompt Gamma-ray Activation Analysis (PGAA) technology

  10. Eco industrial Development: As a Way of Enhancing Sustainable Development

    Directory of Open Access Journals (Sweden)

    Begum Sertyesilisik

    2016-03-01

    Full Text Available The world’s habitat is being deteriorated especially due to the unsustainable production. The need for sustainable development and reducing humanities’ environmental footprint have been addressed in various international frameworks, meetings and reports (e.g. Kyoto protocol, the Resource Efficiency and Cleaner Production Program, the Ten Year Framework of Programs on Sustainable Consumption and Production, the UN Resource Panel, and the Green Economy Initiative, Rio+20, green building certificates, “UNEP Green Economy” in 2011, “Green New Deal” in 2012, the Intergovernmental Panel on Climate Change’s report etc.. EIDs (the eco industrial development can act as catalysts in sustainable development and in reducing environmental footprint of the production processes. Based on an in-depth literature review, this paper aims to analyze how EID can be supported so that environmental footprint of the production processes can be reduced contributing sustainable development. With this aim, the objectives include: analysis of the need for the EID; need for the sustainable development enhanced by sustainable production and sustainable products; key success factors for, barriers against and drivers for the EID. The policy makers, companies, and researchers are expected to get benefit from this paper.

  11. Research and photovoltaic industry at the United States; Recherche et industrie photovoltaique (PV) aux Etats-Unis

    Energy Technology Data Exchange (ETDEWEB)

    Lerouge, Ch; Herino, R; Delville, R; Allegre, R

    2006-06-15

    For a big country as the United States, the solar energy can be a solution for the air quality improvement, the greenhouse gases fight and the reduction of the dependence to the imported petroleum and also for the economic growth by the increase of the employment in the solar industry sector. This document takes stock on the photovoltaic in the United States in the industrial and research domains. The american photovoltaic industry is the third behind the Japan and the Germany. (A.L.B.)

  12. Visual Narrative Research Methods as Performance in Industrial Design Education

    Science.gov (United States)

    Campbell, Laurel H.; McDonagh, Deana

    2009-01-01

    This article discusses teaching empathic research methodology as performance. The authors describe their collaboration in an activity to help undergraduate industrial design students learn empathy for others when designing products for use by diverse or underrepresented people. The authors propose that an industrial design curriculum would benefit…

  13. Responsible Research and Innovation in industry-challenges, insights and perspectives

    NARCIS (Netherlands)

    Martinuzzi, André; Blok, Vincent; Brem, Alexander; Stahl, Bernd; Schönherr, Norma

    2018-01-01

    The responsibility of industry towards society and the environment is a much discussed topic, both in academia and in business. Responsible Research and Innovation (RRI) has recently emerged as a new concept with the potential to advance this discourse in light of two major challenges industry is

  14. 75 FR 65495 - Draft Guidance for Industry on Qualification Process for Drug Development Tools; Availability

    Science.gov (United States)

    2010-10-25

    ...] Draft Guidance for Industry on Qualification Process for Drug Development Tools; Availability AGENCY... Drug Evaluation and Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 51, rm... Drug Evaluation and Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 21, rm...

  15. 78 FR 32667 - Draft Guidance for Industry on Rheumatoid Arthritis: Developing Drug Products for Treatment...

    Science.gov (United States)

    2013-05-31

    ... products. This guidance revises the guidance for industry entitled ``Clinical Development Programs for... Information, Center for Drug Evaluation and Research, Food and Drug Administration, 10903 New Hampshire Ave... (HFM-40), Center for Biologics Evaluation and Research, Food and Drug Administration, 1401 Rockville...

  16. Liquid metal MHD research and development in Israel

    International Nuclear Information System (INIS)

    Branover, H.

    1993-01-01

    The study of liquid metal MHD in Israel commenced in 1973. Initially it was concentrated mainly on laminar flows influenced by external magnetic fields. In 1978 a liquid metal MHD energy conversion program was started. This program was developed at the Center for MHD Studies at Ben-Gurion University in Beer-Sheva, with the participation of specialists from the Technion, the Hebrew University of Jerusalem, Israel Atomic Energy Commission, and others. The program was sponsored initially by the Israel Ministry of Energy and Infrastructure, and later by the Ministry of Industry and Trade. Since 1980, Solmecs, a private commercial company has become a major factor in the development of liquid metal MHD in Israel. From the very beginning the program was based on broad international cooperation. A number of overseas institutions and individuals became participants in the program. Through extensive research and evaluation of a number of concepts of liquid metal MHD power generation systems, It was established that the most promising concept, demanding a relatively short period of development, is the gravitational system using heavy metals (lead, lead alloys) as the magneto-hydrodynamic fluid and steam or gases as thermodynamic fluids. This concept was chosen for further development and industrial application, and the program related to such systems was named the Etgar Program. The main directions of research and development activities have been defined as follows: investigations of physical phenomena, development of universal numerical code for parametric studies, optimization and design of the system, material studies, development of engineering components, building and testing of integrated small-scale Etgar type systems, economic evaluation of the system and comparison with conventional technologies, development of moderate scale industrial demonstration plant. At this time 6 items have been fully implemented and activities on the last item were started. (author)

  17. What do pharmaceutical industry professionals in Europe believe about involving patients and the public in research and development of medicines? A qualitative interview study.

    Science.gov (United States)

    Parsons, Suzanne; Starling, Bella; Mullan-Jensen, Christine; Tham, Su-Gwan; Warner, Kay; Wever, Kim

    2016-01-07

    To explore European-based pharmaceutical industry professionals' beliefs about patient and public involvement (PPI) in medicines research and development (R&D). Pharmaceutical companies in the UK, Poland and Spain. 21 pharmaceutical industry professionals, four based in the UK, five with pan-European roles, four based in Spain and eight based in Poland. Qualitative interview study (telephone and face-to-face, semistructured interviews). All interviews were audio taped, translated (where appropriate) and transcribed for analysis using the Framework approach. 21 pharmaceutical industry professionals participated. Key themes were: beliefs about (1) whether patients and the public should be involved in medicines R&D; (2) the barriers and facilitators to PPI in medicines R&D and (3) how the current relationships between the pharmaceutical industry, patient organisations and patients influence PPI in medicines R&D. Although interviewees appeared positive about PPI, many were uncertain about when, how and which patients to involve. Patients and the public's lack of knowledge and interest in medicines R&D, and the pharmaceutical industry's lack of knowledge, interest and receptivity to PPI were believed to be key challenges to increasing PPI. Interviewees also believed that relationships between the pharmaceutical industry, patient organisations, patients and the public needed to change to facilitate PPI in medicines R&D. Existing pharmaceutical industry codes of practice and negative media reporting of the pharmaceutical industry were also seen as negative influences on these relationships. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  18. Fiscal 1999 achievement report on interuniversity coordination type research and development of industrial technology. Research and development of highly functional material designing platform; 1999 nendo kokino zairyo sekkei platform no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of enabling prediction of structures and properties of polymeric materials by computer-assisted experiments, studies were conducted for putting new simulation technologies to practical application. Simulation technologies underwent research and development with working groups respectively dealing with the coarse-graining molecular dynamic method, dynamic mean field method, dispersed structure simulation, study of verification, and platform. The Faculty of Engineering, Yamagata University, succeeded in the development of a device enabling direct observation of crystallization under shear flow, which was for the construction of a material property database. The Graduate School of Frontier Sciences, University of Tokyo, developed a device for measuring dielectric relaxation under shear flow, by which findings were obtained concerning ion fluctuation and diffusion in a micellar system. The Institute of Industrial Science, University of Tokyo, studied pattern formation dynamics which involved viscoelastic phase separation in a polymeric solution whose composition was near critical. (NEDO)

  19. Fiscal 2000 survey report. Survey of long-term energy technology strategy and the like (Research on actualities of Japanese industries' research and development potential); 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (Nippon kigyo no kenkyu kaihatsuryoku no jittai ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For working out propositions on what the country should do and on what improvement industries should make for the strengthening of industries' competitive power on the market, analyses were conducted into the objects of research and development, organizations engaged in research and development activities, methods of evaluation, and the like. In concrete terms, studies were made on industries' roles in research and development activities and on the actualities of basic research and development potential, and then a survey was conducted through questionnaires and interviews about (1) tasks relating to corporation management and research and development potential, (2) development of research dedicated talent and its fluidity, and (3) problems feared to get worse in the future. Questionnaires were sent to 217 corporations or 577 people of whom 37.6% responded. Each item is described below. Under item (1), it is pointed out that basic research has shrunk as a whole, that pressure is on the increase urging that research directly increase profit, and that theme selection is made to match the business model. Under item (2), it is stated that post-doctorate researchers' knowledge is respected but that recruitment is another matter, and that fluidity of researchers between corporations will increase. Under item (3), it is pointed out that researchers are increasingly inferior in quality and that brain drain out of Japan is feared. (NEDO)

  20. Industrial process gamma tomography. Final report of a coordinated research project 2003-2007

    International Nuclear Information System (INIS)

    2008-05-01

    Gamma computed tomography (CT) is complementary to radiotracer and gamma sealed source techniques largely used for analyzing industrial process units. Relevant target areas for gamma CT applications are generally known. Although the methodology is generic and applicable across broad industrial specimen and facilities, a number of specific items have been identified as the most appropriate target beneficiaries of these applications: distillation columns; packed beds; risers; fluidized beds and other multiphase processing units. These industrial process units present significant technical challenges to CT investigations in terms of the complexity of the multiphase flows that occur in them. In order to address these needs, the IAEA implemented a Coordinated Research Project (CRP) on Industrial Process Gamma Tomography with the overall objective of testing and validating CT techniques for diagnosing industrial multiphase processes. CT laboratories from Argentina, Brazil, Czech Republic, France, Republic of Korea, Malaysia, Norway, Poland, United Kingdom and the United States of America have participated. The specific objectives of the CRP were assessment of the tomographic methods, evaluation of them for investigation of multiphase engineering processes, and design of prototypes of simple CT systems for industrial processing, which can be transferred to other developing countries. The CRP has generated an active network, which also included other groups engaged in the CT field. The round robin test has played an important role in validation of techniques and software. This TECDOC is prepared based on the findings and achievements of the CRP. It is a comprehensive technical report containing valuable information, not readily available in any single publication elsewhere. The participants' reports and software developed by them are compiled in a CD-ROM and attached to the back cover. The guidelines and software packages described in this report can be used as an

  1. The present situation and prospect of industrial irradiation accelerator industry in China

    International Nuclear Information System (INIS)

    Zhao Wenyan; Wang Chuanzhen; Hou Fuzhen

    2005-01-01

    Accelerator technology and the machines are an important part of the nuclear technology and also are the system integration of modern science technology. The application of accelerator technology has made the important breakthrough in many science research fields, in the development course of particle physics, several milestone developments are closely related to accelerator developments. In 1960s, accelerators gradually transferred from the science research to the national economy and society application fields. In 1970s, accelerators applied in many fields involved the industry, medical hygiene, agriculture, environmental protection, and proceed the development of new technique, new craft, new product, and developed lots of newly arisen edge industries, such as the medical equipments, no damage examination, ion injecting, radiation processing. Now accelerators have become a firmly established industry. This paper primarily reviewed the application of industrial radiation accelerators by the 20 years developments of accelerators in China. (author)

  2. West African Journal of Industrial and Academic Research ...

    African Journals Online (AJOL)

    Prof. Osuagwwu

    West African Journal of Industrial and Academic Research December 2016 v0l. ... 1Civil Engineering Department, Collage of Science and Engineering .... P.K. Guha (2009) maintenance and Repairs of Buildings published by new central Book ...

  3. FY 1998 Report on research and development project. Research and development of human-cooperative/coexisting robot systems; 1998 nendo ningen kyocho kyozongata robot system kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This R and D project is aimed at development of the human-cooperative/coexisting robot systems with high safety and reliability, capable of performing complicated works cooperatively and in a coexisting manner with humans in human working and living spaces, in order to help improve safety and efficiency in various industrial areas, improve services and convenience in manufacturing and service areas, and create new industries. The trend surveys cover humanoid robot systems, remote control systems and simulators, and the application surveys cover services for humans, basic humanoids and entertainment communication. The 1998 R and D efforts include research and development, fabrication and surveys for the following themes; (1) fabrication of robot platforms for supporting manual works, (2) development of surrounded visual display systems, (3) development of robot arm manipulation and force displaying systems, (4) development of a dynamic simulator, (5) development of a distributed software platform, (6) researches and development of computation algorithm for kinematic chain dynamics, (7) development of motion teaching system for multi-functional robots, (8) investigation of trends in robotics technology, and (9) researches and surveys of robot application. (NEDO)

  4. The Idea of the Creative Society and the Development of Creative Industries

    Directory of Open Access Journals (Sweden)

    Nerijus Stasiulis

    2017-06-01

    Full Text Available The article surveys the recent research on the idea of the creative society and the development of creative industries. Special attention is paid to the conceptual and factual developments that take place in regions of Central and Eastern Europe. Researchers evaluate the regions’ situation in the context of global developments, suggest novel approaches to society and research practice and provide their recommendations. The relation between individual and communal aspects of creation emerges as a major problem. The tendency is to move from individualistic and elitist strategies of creation toward market-based practices and communal approaches based on the concepts of creative environment and networks of creation. Authors recommend that heads of institutions and researchers give up the overly romantic attitude toward creative activity, transcend the limits of individual perspective and move towards a cooperation among different fields of creativity.

  5. The Advanced Industrial Materials (AIM) program office of industrial technologies fiscal year 1995

    Energy Technology Data Exchange (ETDEWEB)

    Sorrell, C.A.

    1997-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in FY95 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80% of industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 to 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`

  6. 75 FR 35492 - Guidance for Industry on Lupus Nephritis Caused By Systemic Lupus Erythematosus-Developing...

    Science.gov (United States)

    2010-06-22

    ... Communication, Outreach and Development (HFM-40), Center for Biologics Evaluation and Research (CBER), Food and...: The Food and Drug Administration (FDA) is announcing the availability of a guidance for industry... the Division of Drug Information, Center for Drug Evaluation and Research, Food and Drug...

  7. Systems strategies for developing industrial microbial strains

    DEFF Research Database (Denmark)

    Lee, Sang Yup; Kim, Hyun Uk

    2015-01-01

    Industrial strain development requires system-wide engineering and optimization of cellular metabolism while considering industrially relevant fermentation and recovery processes. It can be conceptualized as several strategies, which may be implemented in an iterative fashion and in different...

  8. A Cooperative Industry - Government Woodland Caribou Research Program in Northeastern Alberta

    Directory of Open Access Journals (Sweden)

    Blair Rippin

    1996-01-01

    Full Text Available Rapid development of large scale logging and increasingly intensive petroleum exploration and development in northeastern Alberta prompted the establishment of a cooperative research program to investigate various aspects of woodland caribou (Rangifer tarandus caribou biology. The ultimate goal of the program is to develop an effective plan that will ensure the long term survival of caribou while allowing for renewable and non-renewable resource development. There are three parts to the program. Part I began early in 1991 and makes use of conventional radio telemetry as a means of recording various parameters of general caribou biology. The study area encompasses approximately 4000 km2 of low relief, boreal mixedwood forest. Preliminary results from 2500 radio locations (involving 50 individuals indicate that woodland caribou inhabiting the study area are non-migratory and are strongly associated with some of the more scarce peatland forest types present in the area. Investigations to document the basic biology and ecology will continue for another two years. Part II began in early 1993 as a part of a two-year investigation into the disturbance effects of petroleum exploration and development on caribou movements and behaviour. One objective of this study is to develop a predictive model useful in determining the cumulative effects of varying intensities of disturbance on caribou. Part III began in early 1994 with a proposed three-year investigation to determine the mechanism of spatial and temporal separation of caribou and moose in the study area. These relationships may indicate the means by which caribou minimize the impact of wolf predation on their populations in northeastern Alberta. Results will be applied to industrial land use and specifically to large scale forest harvesting planned for the area. The research program is supported through cooperative funding contributed by 24 petroleum companies, 1 forest company, 2 peat companies and

  9. Active solar heating industry development study

    International Nuclear Information System (INIS)

    1995-01-01

    Despite the fact that solar water heating systems are technologically viable and commercially available, this Energy Technology Support Unit report shows that there is no established market in the United Kingdom. The Solar Trade Association (STA) has undertaken an Active Solar Heating Industry Development Study which is reported here. The data is derived from a questionnaire survey completed by companies, organizations and individuals operating within the industry. Information was also gathered from utility companies, and STAs elsewhere in Europe. Barriers which need to be overcome include lack of public awareness, especially in the construction industry, lack of capital investment and other financial disincentives, little or no government support, and lack of organization and quality monitoring and assurance within the industry itself. (UK)

  10. The International Experience of Regional Development of Creative Industries

    Directory of Open Access Journals (Sweden)

    Turskyj Ihor V.

    2017-12-01

    Full Text Available The article is aimed at generalizing the international experience of regional development of creative industries and defining directions of its implementation in Ukraine. The experience of the world countries on regional development of creative industries has been generalized, tendencies and specificity of these development processes have been identified. The interrelation of the process of development of creative industries with innovation development of regions has been defined. Prospects for development of creative industries in regions of Ukraine have been identified and directions of implementation of foreign experience have been suggested. Thus, strategic measures for the development of creative clusters can be the corresponding priorities of cultural policy in the regions, the development of specific projects and programs, the opening of art-incubators, the creation of a favorable investment climate, financial and tax incentives as conditions for interaction between creativity and business. The scale and dynamics of the world’s creative sector, which has a significant potential for growth and less vulnerability in financial-economic crises compared to the traditional sector, gives chance to high expectations for the development of creative industries in Ukraine as well.

  11. Industry and development: Global report 1991/92

    International Nuclear Information System (INIS)

    1991-01-01

    In the 1980s, but increasingly so within the past two years, opinion has swung decisively in favour of an open, market-oriented economy, for the greater part privately owned and managed, as a way of achieving sustained industrial growth. It is with this knowledge that the Global Report focuses once again on providing detailed, concrete and up-to-date information on the global prospects for industrial growth. This year, special attention is devoted to the issues of efficiency in the use of energy and to the new financial instruments available for manufacturing industries in the global financial markets. An overview of industrial energy consumption and efficiency in the manufacturing sector is presented. Industry is the most important end-user sector in total final energy consumption in most countries. Given the dominant share of manufacturing energy consumption, it is not difficult to see the enormous potential for energy savings through improved energy efficiency in the manufacturing sector, and the substantial economic and environmental benefits to be derived therefrom in both developing and developed countries. The widespread decoupling of output and energy in OECD countries in the past two decades has already been noted, while the opposite phenomenon of energy consumption increasing in step with output has been observed in developing countries during the same period. Conservation and improvements in energy efficiency are therefore of crucial importance in developing countries. Refs, figs and tabs

  12. Recent developments: Industry briefs

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This is the February 1992 'Industry Briefs' portion of the 'Recent Developments' section. Issues mentioned are: (1) closure of San Onofre Unit 1, (2) start-up of Penly Unit 2, (3) signing of a safeguards agreement with North Korea, (4) Canadian nuclear activities in Romania, and (5) the merger of two Japanese fuel cycle companies

  13. ECOLOGY SAFETY TECHNOLOGIES OF UNCONVENTIONAL OIL RESERVES RECOVERY FOR SUSTAINABLE OIL AND GAS INDUSTRY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Viacheslav Zyrin

    2016-09-01

    Full Text Available The problem of effective technology for heavy oil recovery nowadays has a great importance, because of worsening geological conditions of the developed deposits, decreasing recovery factor, increasing the part of heavy oil. For the future sustainable development of oil producing industry the involved technologies must require energy effectiveness and ecological safety. The paper proves the enhanced oil recovery methods necessity for heavy oil deposits, highlighted thermal technologies as the most effective. But traditional thermal treatment technologies is a source of air pollutant emission, such as CO, NO etc. The calculation of emissions for traditional steam generator is provided. Besides, the paper shows the effectiveness of electrical enhanced oil recovery methods. The advantages of associated gas as a fuel for cogeneration plants is shown. The main approaches to implementation of carbon dioxide sequestration technologies in the oil and gas industry of Russia are defined. Conceptual view of СО2-EOR technologies potential within the context of sustainable development of oil and gas industry are presented. On the basis of the conducted research a number of scientific research and practical areas of the CCS technology development are revealed.

  14. Creative Research: The Theory and Practice of Research for the Creative Industries

    OpenAIRE

    Best, Kathryn

    2011-01-01

    When conducting research in and for the creative industries, there are a wealth of different possible research approaches that can be taken - reflecting the diverse nature of the disciplines (design, arts and crafts, advertising, architecture, fashion, film, music, TV, radio performing arts, publishing and interactive software) and academic contexts (art schools, business schools and universities) involved. The result is that there are variations in the emphasis and approach taken to how stud...

  15. Achievement report for fiscal 1987 on the entrusted research and development of basic technologies for next-generation industries. Research and development of technologies of mass culture of cells; 1987 nendo jisedai sangyo kiban gijutsu kenkyu kaihatsu seika hokokusho. Saibo tairyo baiyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-01

    The aim is to add value to the chemical industry by establishing technologies for realizing a large and stable supply of fine chemical products whose industrial production is difficult when conventional techniques are applied, the products including various useful substances yielded by animal cells including those of man. To fulfill the aim, efforts are exerted to complete basic technologies involving the mass culture of cells through conducting researches into animal biofunctions. This report covers the endeavors made in fiscal 1987 under the above-named project created in fiscal 1981. All the subject matters are for the development of substance production methods for industrial use, and include the studies of use of optimal cultivation methods mainly for serumless cultures and cultivation engineering, studies centering on the high-density cultivation of cells and serumless cultures, studies using suspended and quasi-suspended cell lines, studies using cells deriving from bone marrow, and studies using epithelial cells. Furthermore, the results are outlined of the comprehensive researches conducted into technologies of mass cultivation of cells. (NEDO)

  16. Application of Specific Features of Industrial Products when Forming and Developing Brands of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Yatsentiuk Stanislav V.

    2014-03-01

    Full Text Available The article analyses and structures approaches and principles of formulation of industrial products. It offers classification of goods and markets of industrial products by their characteristics and participants. It identifies main participants that make decisions at B2C and B2B markets and characterises their specific features and motivation when making decisions on purchase of products of industrial enterprises. It studies and analyses indicators of development of domestic markets of consumer goods and market of industrial products and dynamics of development of their relation in retrospective view.

  17. Experience and prospects for developing research reactors of different types

    International Nuclear Information System (INIS)

    Kuatbekov, R.P.; Tretyakov, I.T.; Romanov, N.V.; Lukasevich, I.B.

    2015-01-01

    NIKIET has a 60-year experience in the development of research reactors. Altogether, there have been more than 25 NIKIET-designed plants of different types built in Russia and 20 more in other countries, including pool-type water-cooled and water moderated research reactors, tank-type and pressure-tube research reactors, pressurized high-flux, heavy-water, pulsed and other research reactors. Most of the research reactors were designed as multipurpose plants for operation at research centers in a broad range of applications. Besides, unique research reactors were developed for specific application fields. Apart from the experience in the development of research reactor designs and the participation in the reactor construction, a unique amount of knowledge has been gained on the operation of research reactors. This makes it possible to use highly reliable technical solutions in the designs of new research reactors to ensure increased safety, greater economic efficiency and maintainability of the reactor systems. A multipurpose pool-type research reactor of a new generation is planned to be built at the Center for Nuclear Energy Science & Technology (CNEST) in the Socialist Republic of Vietnam to be used to support a spectrum of research activities, training of skilled personnel for Vietnam nuclear industry and efficient production of isotopes. It is exactly the applications a research reactor is designed for that defines the reactor type, design and capacity, and the selection of fuel and components subject to all requirements of industry regulations. The design of the new research reactor has a great potential in terms of upgrading and installation of extra experimental devices. (author)

  18. Forest industries energy research

    Energy Technology Data Exchange (ETDEWEB)

    Scott, G. C.

    1977-10-15

    Data on energy use in the manufacturing process of the wood products industry in 1974 are tabulated. The forest industries contributed 10% of New Zealand's factory production and consumed 25% of all industrial energy (including that produced from self-generated sources such as waste heat liquors and wood wastes) in that year. An evaluation of the potential for savings in process heat systems in existing production levels is shown to be 3% in the short, medium, and long-term time periods. The industry has a high potential for fuel substitution in all sectors. The payback periods for the implementation of the conservation measures are indicated.

  19. THE QUALITY OF HUMAN RESOURCES – A REQUEST FOR HOTEL INDUSTRY DEVELOPMENT. A THEORETICAL APPROACH

    Directory of Open Access Journals (Sweden)

    Aruștei Carmen Claudia

    2013-04-01

    issue due to the fact that, usually, when talking about tourism or hotel industry development, the literature in the field offers macro solutions like, infrastructure development, service/product development and/or improving service quality. We consider that a micro approach is also important and from this perspective, we emphasis the role of human resource quality for industry development. The quality of human resources, as a dimension of service quality was not detailed extensively by the literature in the field but we found it relevant for hotel industry development, as this industry it is a service industry, and as Ritz-Carlton Company’s motto say “service comes only from people”. We discuss some aspects about the frequency of human resource quality dimension in the quality measurement models and then we detail its dimensions. The three dimensions presented in this article are: “competence”, “physical appearance” and “behaviour and attitude”. For “behaviour and attitude” subdimension we identified some patterns in measuring studies and it looks like responsiveness, friendliness, empathy and service personalisation are the most used terms.Even though these dimensions were the results of literature review and are not empirical validated, we consider being helpful for future research in the field.

  20. Analysis of changes in the federal funding trends to higher education for basic research in space, solar, and nuclear sciences compared to government and industry: 1967-1985

    International Nuclear Information System (INIS)

    Veasey, C. Jr.

    1985-01-01

    The problem addressed by this study is that the amount of federal funds allocated in higher education for conducting basic research in space, solar, and nuclear sciences appear to be declining relative to government and industry. To test this hypothesis, data were obtained from the National Science Foundation on the amounts of federal funds provided for research and development from fiscal years 1955 to 1985. The NSF data were organized into tables, presented, and analyzed to help determine what changes had occurred in the amounts of federal funds allocated to higher education, government, and industry for basic research in space, solar, and nuclear sciences for fiscal years 1967 to 1985. The study provided six recommendations to augment declining federal funds for basic research. (1) Expand participation in applied research, (2) Develop and expand consortia arrangements with other academic institutions of higher education. (3) Pursue other funding sources such as alumni, private foundations, industry, and state and local government. (4) Develop and expand joint research with national and industrial laboratories. (5) Expand participation in interdisciplinary and multidisciplinary research to develop technological solutions to local, regional, and national problems. (6) Develop and expand programs of reciprocal internships, and sabbaticals with industrial and national laboratories

  1. Undue industry influences that distort healthcare research, strategy, expenditure and practice: a review.

    Science.gov (United States)

    Stamatakis, Emmanuel; Weiler, Richard; Ioannidis, John P A

    2013-05-01

    Expenditure on industry products (mostly drugs and devices) has spiraled over the last 15 years and accounts for substantial part of healthcare expenditure. The enormous financial interests involved in the development and marketing of drugs and devices may have given excessive power to these industries to influence medical research, policy, and practice. Review of the literature and analysis of the multiple pathways through which the industry has directly or indirectly infiltrated the broader healthcare systems. We present the analysis of the industry influences at the following levels: (i) evidence base production, (ii) evidence synthesis, (iii) understanding of safety and harms issues, (iv) cost-effectiveness evaluation, (v) clinical practice guidelines formation, (vi) healthcare professional education, (vii) healthcare practice, (viii) healthcare consumer's decisions. We located abundance of consistent evidence demonstrating that the industry has created means to intervene in all steps of the processes that determine healthcare research, strategy, expenditure, practice and education. As a result of these interferences, the benefits of drugs and other products are often exaggerated and their potential harms are downplayed, and clinical guidelines, medical practice, and healthcare expenditure decisions are biased. To serve its interests, the industry masterfully influences evidence base production, evidence synthesis, understanding of harms issues, cost-effectiveness evaluations, clinical practice guidelines and healthcare professional education and also exerts direct influences on professional decisions and health consumers. There is an urgent need for regulation and other action towards redefining the mission of medicine towards a more objective and patient-, population- and society-benefit direction that is free from conflict of interests. © 2013 Stichting European Society for Clinical Investigation Journal Foundation. Published by Blackwell Publishing Ltd.

  2. The development of Bio-pharmaceutical industry in China: problems and solutions.

    Science.gov (United States)

    Yan, Gujun

    2014-07-01

    Known as the "sunrise industry" of the 21st century, bio-pharmaceutical industry has been a fast-growing global industry, and many countries have been developing this industry as the focus of their national economies. In China, there exists a huge market demand for the development of bio-pharmaceutical industry, but at the present stage the industry is faced with some problems, such as low level of R & D for innovative drugs, and inappropriate capital investment in the industrialization. In order to accelerate the development of China's bio-pharmaceutical industry, it is necessary to take strategic initiatives of improving the technology transfer system, developing the bio-pharmaceutical outsourcing, and building a diversified industrial financing system.

  3. BBMRI-ERIC as a resource for pharmaceutical and life science industries: the development of biobank-based Expert Centres.

    Science.gov (United States)

    van Ommen, Gert-Jan B; Törnwall, Outi; Bréchot, Christian; Dagher, Georges; Galli, Joakim; Hveem, Kristian; Landegren, Ulf; Luchinat, Claudio; Metspalu, Andres; Nilsson, Cecilia; Solesvik, Ove V; Perola, Markus; Litton, Jan-Eric; Zatloukal, Kurt

    2015-07-01

    Biological resources (cells, tissues, bodily fluids or biomolecules) are considered essential raw material for the advancement of health-related biotechnology, for research and development in life sciences, and for ultimately improving human health. Stored in local biobanks, access to the human biological samples and related medical data for transnational research is often limited, in particular for the international life science industry. The recently established pan-European Biobanking and BioMolecular resources Research Infrastructure-European Research Infrastructure Consortium (BBMRI-ERIC) aims to improve accessibility and interoperability between academic and industrial parties to benefit personalized medicine, disease prevention to promote development of new diagnostics, devices and medicines. BBMRI-ERIC is developing the concept of Expert Centre as public-private partnerships in the precompetitive, not-for-profit field to provide a new structure to perform research projects that would face difficulties under currently established models of academic-industry collaboration. By definition, Expert Centres are key intermediaries between public and private sectors performing the analysis of biological samples under internationally standardized conditions. This paper presents the rationale behind the Expert Centres and illustrates the novel concept with model examples.

  4. West African Journal of Industrial and Academic Research: Editorial ...

    African Journals Online (AJOL)

    ... communications, state-of-the-art developments in Information and communications technology, ... physics, industrial electronics, management sciences and engineering, industry chemistry, general technology rocketry, space and ... application of communications and information technology to these fields of importance.

  5. Manpower development in the US nuclear power industry

    International Nuclear Information System (INIS)

    Todreas, N.E.; Foulke, L.R.

    1985-01-01

    This paper reviews the history and current status of the university nuclear education sector and the utility training sector of the United States (US) nuclear power industry. Recently, the number of programs in the university nuclear education sector has declined, and the remaining programs are in need of both strong governmental and industrial assistance if they are to remain a stable source for educating nuclear engineers and health physicists to staff the resurgence of the nuclear power industry. The utility training sector has undergone remarkable development since the TMI-2 accident. Programs to recruit, train, and qualify the variety of personnel needed, as well as the steps to accredit these programs, are being developed on a systematic, industry-wide basis. A number of new technologies for educating and training personnel are emerging which may be used to create or improve learning environments. Manpower development for the US nuclear power industry is a shared responsibility among the universities, the nuclear utilities, and the nuclear suppliers. This shared responsibility can continue to be best discharged by enhancement of the interaction among all parties with respect to evaluating the proper level of cognitive development within the utility training program

  6. ECUT: Energy Conversion and Utilization Technologies program. Industry, university and research interest in the US Department of Energy ECUT biocatalysis research activity

    Science.gov (United States)

    Wilcox, R. E.

    1983-01-01

    The results of a Research Opportunity Notice (RON) disseminated by the Jet Propulsion Laboratory for the U.S. Department of Energy Conversion and Utilization Technologies (ECUT) Program's Biocatalysis Research Activity are presented. The RON was issued in late April of 1983 and solicited expressions of interest from petrochemical and chemical companies, bioengineering firms, biochemical engineering consultants, private research laboratories, and universities for participating in a federal research program to investigate potential applications of biotechnology in producing chemicals. The RON results indicate that broad interest exists within the nation's industry, universities, and research institutes for the Activity and its planned research and development program.

  7. Development, Problems and Countermeasures of Chinese Racing Car Industry

    Science.gov (United States)

    Yang, J. J.

    2018-05-01

    In recent years, motor car racing has developed rapidly in China. However, under the background of maximum vehicle production and car ownership in China, the racing car industry has a long way compared with that of the developed countries. The paper analyzes the current situation and summarizes the problems of Chinese racing car industry with supporting documentation and review of the literature. The future trend of the development of car industry in China is discussed. On the basis of the analysis and prediction, the strategies to respond to the future racing car industry in China are presented.

  8. Industrialized Innovation: The Connection of Science & Technology Innovation with Industrial Innovation

    Institute of Scientific and Technical Information of China (English)

    Yinxing Hong; Yao Lu; Jianghuai Zheng

    2017-01-01

    In light of the relationship and the current disconnection between science & technology (S&T) innovation and industrial innovation in China,it is necessary to put forward and emphasize the concept of industrialized innovation.Industrialized innovation is the bridge and intermediation between S&T innovation and industrial innovation,which is not only a concept,but also a mechanism and combination force.There are two ways to achieve industrialized innovation:through industry-university-research coordination and through technology entrepreneurship.The meaning of industry-university-research coordination is not about coordination among industry,university and research sectors in an institutional sense;rather it is about the coordination of the functions of cultivation and development in new industries,new technologies,and new talents of industrialized innovation.The incentive mechanism for industrialized innovation should motivate not only innovation but also coordination.Technology entrepreneurship is the industrialization of new technology through business start-ups,which occurs beyond the stage of incubation and development of new technology.The capital of technology entrepreneurship is the set consisting of knowledge capital manifested through technological innovation,human capital manifested through entrepreneurs,and physical capital in the form of venture capital.While physical capital is indispensable,knowledge capital and human capital play the decisive role in technology entrepreneurship.The industrialization of technological innovation involves two requirements:one is to enable the new technology industry to achieve a large scale rapidly,and the other is to fully realize the potential value of the new technology.Both requirements are reliant on effective innovation in business models.

  9. Choosing the Direction of Development of Foreign Economic Activity for Enterprises in the Aviation Industry

    Directory of Open Access Journals (Sweden)

    Shtal Tetyana V.

    2017-11-01

    Full Text Available The article is aimed at studying the existing approaches to the development of foreign economic activity (FEA of enterprise, elaborating the procedure of its management in order to determine the direction of development of FEA of enterprises in the aviation industry of Ukraine. The authors have developed, formalized and visualized a phased mechanism of choosing the direction of development of FEA for enterprise, according to the method of functional modeling. The obtained instrument was used to determine the direction of FEA development for a typical enterprise in the aviation industry. Features of the aforementioned enterprise have been allocated, a suitable set of development directions has been selected, a reasoned procedure of implementation of activities on development of foreign economic activity at the enterprise has been analyzed and determined. Prospect for further research in this direction can be implementation of the mechanism at the enterprises of other industries, refinement of the instrumentarium for each stage of the process according to their features and needs.

  10. Sustainable development for mineral and energy industries (from a legal pont of view)

    International Nuclear Information System (INIS)

    Frenz, W.

    2000-01-01

    The principle of sustainable development has become a central idea of environmental law. The idea has been around in legal discussion and political declarations for some time. Now, the principle has been legally fixated. This leads to serious consequences for the legal framework in which mineral and energy industries operate. The concept of sustainable development emerged towards the end of the 70s. It has been incorporated into political declarations, first of all, into the Brundtland report from 1987, later into the Rio Declaration on Environment and Development and into Agenda 21 from 1992. According to these documents the needs of future generations must be safeguarded. Furthermore, ecological, economic and social interests must be reconciled. Significantly, the principle could demand from mineral and energy industries to limit the extraction of non-renewable resources. This could imply new restrictions for the mining and energy industrial sector. The following presents ideas which have been developed in connection with Collaborative Research Center 525 'A Resource-Orientated Analysis of the Material Flow of Metallic Raw Materials'. 8 refs

  11. Development of industrial ion implantation and ion assisted coating processes: A perspective

    International Nuclear Information System (INIS)

    Legg, K.O.; Solnick-Legg, H.

    1989-01-01

    Ion beam processes have gone through a series of developmental stages, from being the mainstay of the semiconductor industry for production of integrated circuits, to new commercial processes for biomedical, aerospace and other industries. Although research is still continuing on surface modification using ion beam methods, ion implantation and ion assisted coatings for treatment of metals, ceramics, polymers and composites must now be considered viable industrial processes of benefit in a wide variety of applications. However, ion implantation methods face various barriers to acceptability, in terms not only of other surface treatment processes, but for implantation itself. This paper will discuss some of the challenges faced by a small company whose primary business is development and marketing of ion implantation and ion-assisted coating processes. (orig.)

  12. Research on carbon emission driving factors of China’s provincial construction industry

    Science.gov (United States)

    Shang, Mei; Dong, Rui; Fu, Yujie; Hao, Wentao

    2018-03-01

    As a pillar industry of the national economy, the damage to the environment by construction industry can not be ignored. In the context of low carbon development, identifying the main driving factors for the carbon emission of the provincial construction industry are the key for the local government to formulate the development strategy for construction. In the paper, based on the Kaya factor decomposition method, the carbon intensity of the energy structure, energy intensity and the impact of the construction output on the carbon emission of provincial construction industry are studied, and relevant suggestions for low carbon development of provincial construction industry are proposed. The conclusion of this paper provides a theoretical basis for the early realization of low-carbon development in China’s provincial construction industry.

  13. Towards eco-agro industrial clusters in aquatic production: the case of shrimp processing industry in Vietnam

    NARCIS (Netherlands)

    Pham Thi Ahn,; Tran Thi My Dieu,; Mol, A.P.J.; Kroeze, C.; Bush, S.R.

    2011-01-01

    The concept of industrial ecology has been applied in this research to study possibilities to develop an eco-industrial cluster model for fishery production industry in Vietnam. By learning from experiments of other developed countries, we apply the principles of Industrial Ecology and of Ecological

  14. Human factors research in Central Research Institute of Electric Power Industry creation of safety culture

    International Nuclear Information System (INIS)

    Horie, Yasuo

    2002-01-01

    To prevent accident of nuclear power plant, Human Factors Center was built in the Central Research Institute of Electric Power Industry in July 1987. It developed an evaluation method of human error cases and an application method of human factors information. Now it continues analysis and application of human factors information, development of training/work support tools and research/experiment of human behavior. Japan-Human Performance Evaluation System (J-HPES) was developed as an analytical system for analysis and evaluation of human factors related to the trouble and for using the result as the common property by storage the analytical results. J-HPES has a standard procedure consisted of collecting and analyzing data and proposing the countermeasures. The analytical results are arranged by 4 kinds of charts by putting into the form of a diagram. Moreover, it tries to find the causes with indirect and potential causes. Two kinds of materials, Caution Report and Human Factors Precept by means of Illustrations, are published. People can gain access to HFC database by URL http://criepi.denken.or.jp/CRIEPI/HFC/DB. To prevent these accidents, creation of human factors culture has been required. Five kinds of teaching materials and the training method are developed. (S.Y.)

  15. Industry interests in gambling research: Lessons learned from other forms of hazardous consumption.

    Science.gov (United States)

    Cowlishaw, S; Thomas, S L

    2018-03-01

    Research indicates that the evidential bases for many harm reduction policies targeting hazardous consumptions (including tobacco, alcohol and gambling) have been distorted by commercial industries that derive revenue from such commodities. These distortions are best illustrated by research on tobacco and alcohol, which indicates similar tactics used by industries to determine favourable policy environments through engineering of evidence, among other approaches. Although there is concern that gambling research is similarly vulnerable to commercial interests, the relevant literature lags far behind other fields and the aim of this paper is to increase familiarity with tactics used by industries for influencing research. It summarises the conceptual and empirical bases for expecting conflicts between goals of public health and companies that profit from hazardous consumptions. It also summarises evidence describing practices deployed by tobacco corporations, which include third-party techniques and the selective funding of research to manufacture doubt and deflect attention away from the consequences of smoking. It then reviews both early and emerging evidence indicating similar strategies used by alcohol industry, and uses this literature to view practices of the gambling industry. It argues that parallels regarding selective funding of research and third-party techniques provide grounds for strong concern about commercial influences on gambling research, and implementation of precautionary approaches to management of vested interests. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Logistics research report : Framework in the healthcare industry

    NARCIS (Netherlands)

    Willems, A.; Hajdasinski, A.K.; Willems, J.

    2009-01-01

    The research report takes the perspective of Information Logistics and investigates relating concepts like Knowledge Management, Information Systems and Context Awareness in the context of the healthcare industry. The aim of Information Logistics is to deliver the right information product, in the

  17. Wind energy development as a part of Poland's industrial development

    DEFF Research Database (Denmark)

    Stoerring, Dagmara; Hvelplund, Frede Kloster

    2003-01-01

    The paper concludes with recommendations on how to make wind energy development a part of the industrial development in Poland by introducing renewable energy support mechanisms to improve the conditions for companies to develop wind technology in Poland....

  18. 7 CFR 1220.230 - Promotion, research, consumer information, and industry information.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Promotion, research, consumer information, and...), DEPARTMENT OF AGRICULTURE SOYBEAN PROMOTION, RESEARCH, AND CONSUMER INFORMATION Soybean Promotion and Research Order Expenses and Assessments § 1220.230 Promotion, research, consumer information, and industry...

  19. The National Nanotechnology Initiative: Research and Development Leading to a Revolution in Technology and Industry. Supplement to the President’s 2011 Budget

    Science.gov (United States)

    2010-02-01

    commercial “ pull ” to enable rapid establishment of domestic 21st century manufacturing and to rapidly reduce product cost. CNT electronics...Opportunities for Academic Liaison with Industry ( GOALI ), Partnerships for Innovation (PFI) , and Industry-University Cooperative Research Centers (IUCRC

  20. Aspects regarding the efficiency of technology transfer from the national research institutes towards the industry in order to accelerate the development of Romanian economy

    Directory of Open Access Journals (Sweden)

    Diana Felicia Nicoara

    2012-08-01

    Full Text Available Currently, Romania is faced with problems regarding closing the deep economic gap between it and the rest of the EU members. In addition, Romania is concerned with overcoming the difficulties generated by the current economic crisis. The technology transfer of the research results from the scientific field towards the industry is one of the main leverages for the economic development, the innovation development and the competitiveness of the companies. At this point, Romania marks a very low transfer rate of technology between the research institutions and the economy. This is why, increasing and accelerating this rate becomes a vital element for the Romanian economy. The national research institutes are one of the most representative institutions of the national research and development system. With a high capacity of generating scientific results specific to certain national areas of expertise, their potential of transfering technology should be exploited and made more efficient. This paper presents a synthesis of the written works regarding the technology transfer, its role in the economic growth and the factors influencing its efficiency. The paper performs an analysis the current state of the national research institutes and formulates hypotheses regarding the causes leading to the low technology transfer rate, making suggestions on further research studies on how to turn this important process into a more efficient one

  1. Collaborative research between academia and industry using a large clinical trial database: a case study in Alzheimer's disease

    DEFF Research Database (Denmark)

    Jones, Roy; Wilkinson, David; Lopez, Oscar L

    2011-01-01

    Large clinical trials databases, developed over the course of a comprehensive clinical trial programme, represent an invaluable resource for clinical researchers. Data mining projects sponsored by industry that use these databases, however, are often not viewed favourably in the academic medical...... community because of concerns that commercial, rather than scientific, goals are the primary purpose of such endeavours. Thus, there are few examples of sustained collaboration between leading academic clinical researchers and industry professionals in a large-scale data mining project. We present here...

  2. State, Institutions and Industrial Development

    DEFF Research Database (Denmark)

    Lauridsen, Laurids Sandager

    perspectives on the state and the economy (Chapter 5), from the perspective of policy networks and collaborative advantages between the private and public sectors, and from a politico-institutional and politics perspective (Chapter 8). Chapter 6 develops the notion of strategic industrial policy, while Chapter......      What happens when developing countries can no longer grow by simply exploiting their existing comparative advantages in natural resources or cheap labour? Many middle income countries are situated in a sandwiched position between on the one hand competitive pressure from lower-wage countries...... and on the other hand competition from innovators in the advanced capitalist countries. To climb onwards to higher income levels they must deepen and upgrade their industries. The dissertation is based on the assumption that this transition from low to high value-added activities does not take place ‘automatically...

  3. Industry participation in DOE-sponsored geopressured geothermal resource development. Final report, 1 September 1977-30 April 1979

    Energy Technology Data Exchange (ETDEWEB)

    Coffer, H.F.

    1979-01-01

    A series of DOE/Industry forums were carried out to keep industry advised of the DOE program to develop the geopressured geothermal resources of the Gulf Coast. A total of eighteen meetings were held with registered attendance of 621 representing a good cross section of industry, state, and federal agencies. An Overview Group and four working subgroups - site selection, drilling and testing, environmental/laboratory research, and legal institutional were established to subdivide the DOE programs into areas of interest and expertise. During the contract period three overview, four site selection, three drilling and testing, five environmental/laboratory research and three legal/institutional meetings have been conducted. Interest in and attendance at the meetings continue to grow reflecting increased industry contact with the DOE Geopressured Geothermal Resource Development Program. Two other studies were carried out for DOE under this contract; a Salt Water Disposal Study and an Industry Survey to evaluate the DOE Resource Development Program. The Salt Water Disposal Study reviewed subsurface salt water disposal experience on the Texas and Louisiana Gulf Coast. This preliminary study concluded that subsurface brine disposal should be possible in the areas of interest with adequate evaluation of the geology of each area and a well designed and constructed surface and subsurface facility. The industry survey indicated general satisfaction with the technical design of the resource evaluation program but felt the program should be moving faster.

  4. Comprehensive development of industrial symbiosis for the response of greenhouse gases emission mitigation: Challenges and opportunities in China

    International Nuclear Information System (INIS)

    Liu, Zhe; Adams, Michelle; Cote, Raymond P.; Geng, Yong; Chen, Qinghua; Liu, Weili; Sun, Lu; Yu, Xiaoman

    2017-01-01

    Although not yet a global consensus, there is widespread agreement that climate change is the result of anthropogenic sources of greenhouse gases (GHG) emissions. In order to respond to this issue, society has applied such strategies as clean energy development, improving industrial resource efficiency etc. Despite this, GHG emissions are still pursuing an upward trend. As the largest global GHG emitter, China faces a considerable challenge in responding to its agreed target of 40–45% GHG emission mitigation per unit gross domestic production (GDP) by 2020 as compared to 2005 levels. How to practically achieve this is still largely undecided. Comprehensive development of industrial symbiosis around nationwide is considered part of the solution. However, few researchers have studied how to actually implement a comprehensive development of industrial symbiosis for the purpose of GHG emission mitigation. This work intends to address this gap through highlighting the opportunities to develop such an approach for particular application to GHG emissions reduction in China. In addition, this study will also address the challenges ahead associated with the implementation of such a strategy, and outlines the where future research could be focused. Policy implications like establishing industrial symbiosis indicators associated with GHG emission mitigation are proposed. - Highlights: • Urgent issue of GHG mitigation and background of industrial symbiosis are introduced. • The challenges like lack of indicator, investigating methodologies and regional disparity are analyzed. • Opportunities for GHG mitigation through comprehensive development of industrial symbiosis are detailed. • Policy implications for responding GHG mitigation through industrial symbiosis are proposed.

  5. Development of Industrial Yeast Platform Strains

    DEFF Research Database (Denmark)

    Bergdahl, Basti; Dato, Laura; Förster, Jochen

    2014-01-01

    Most of the current metabolic engineering projects are carried out using laboratory strains as the starting host. Although such strains are easily manipulated genetically, their robustness does not always meet the requirements set by industrial fermentation conditions. In such conditions, the cells...... screening of the 36 industrial and laboratory yeast strains. In addition, progress in the development of molecular biology methods for generating the new strains will be presented....

  6. Evaluation of the Policy of the Creative Industry for Urban Development

    Directory of Open Access Journals (Sweden)

    Yu-Yun Liu

    2017-06-01

    Full Text Available Culture, an intellectual capital of a city, is accumulated through the intellect and wisdom of the government, citizens, businesses and other organizations. Cities regardless of their size are seeking their own distinguishing features and positions. By combining culture and creativity to improve international visibility, cities can develop new potentials, create job opportunities and boost economic growth. Therefore, cultural and creative industries have become the core industries that cities worldwide actively seek to develop; furthermore, various city governments have unanimously agreed that the creative industry will effectively improve urban economic competitiveness. This study investigated how the creative industry improved urban competitiveness, developed relevant assessment indexes and formulated policies for developing the creative industry. First, the fuzzy Delphi method was adopted to determine the indexes for assessing the creative industry’s positive influence on urban competitiveness. Subsequently, the analytic hierarchy process and the analytic network process were integrated to establish a model for assessing city-based creative industry development policies. City governments seeking to promote such policies can refer to this model. Finally, an importance-performance analysis was performed to investigate the satisfaction for policies related to creative industries, providing a reference for governments to promote pertinent policies. The results of this study indicated that the indexes of innovation capability, industrial cooperation, innovation incubation and industry-government-academia integration are crucial bases for cities to develop the creative industry. In addition, the policies of industrial R&D and clustering, talent training and industrial consulting and expanding industrial and marketing channels and networks can be adopted to enhance creative industry development.

  7. 7 CFR 1980.488 - Guaranteed industrial development bond issues.

    Science.gov (United States)

    2010-01-01

    ... industrial plants for lease to private businesses engaged in industrial manufacturing and does not provide... 7 Agriculture 14 2010-01-01 2009-01-01 true Guaranteed industrial development bond issues. 1980..., DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) GENERAL Business and Industrial Loan...

  8. Product Platform Development in Industrial Networks

    DEFF Research Database (Denmark)

    Karlsson, Christer; Skold, Martin

    2011-01-01

    The article examines the strategic issues involved in the deployment of product platform development in an industrial network. The move entails identifying the types and characteristics of generically different product platform strategies and clarifying strategic motives and differences. Number o...... of platforms and product brands serve as the key dimensions when distinguishing the different strategies. Each strategy has its own challenges and raises various issues to deal with.......The article examines the strategic issues involved in the deployment of product platform development in an industrial network. The move entails identifying the types and characteristics of generically different product platform strategies and clarifying strategic motives and differences. Number...

  9. Review of 1992 industry developments

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The year 1992 was remarkable for a number of major events that affected the market. The key developments can be categorized in areas such as supply restrictions, legislative and political events, industry consolidations, reactor and mine closures as well as start-ups, and achievements at assorted fuel cycle operations. Clearly, the most influential event was the US uranium anti-dumping investigation, but other significant developments included Euratom's actions restricting imports of CIS-origin uranium into the European Community, continuing upheaval and evolution of the market-based economies of the CIS and central Europe, the second-most active year ever in the uranium spot market, the formation of ConverDyn and the indefinite shutdown of Sequoyah Fuels, Cogema's purchase of Urangesellschaft, passage of a US Energy Bill, China's signing of the Non-Proliferation Treaty, renewed progress on Taiwan's fourth nuclear station, formation of the Japanese fuel cycle corporation JNFL, premature closure of three US reactors for economic reasons, and several mergers and acquisitions that further consolidated the uranium and nuclear industries. As a whole, the past year will be looked back on by market participants as a year of turning point, both good and bad, in the evolution of the industry

  10. Balancing regional industrial development: analysis on regional disparity of China's industrial emissions and policy implications

    DEFF Research Database (Denmark)

    Liang, Hanwei; Dong, Liang; Luo, Xiao

    2016-01-01

    Efficient industrial emissions mitigation strategy is critical for China's national action on climate change and sustainable development, considering its rapid industrialization. Regional disparity brings difficulties and uncertainties to policy implementation in China. Therefore, an investigation...... development, and highlight not only disparity, but also inequity exists. It is concluded that, there is a larger unequal distribution of GDP per unit of air pollutants and CO2 emission between eastern and western regions, reveals that less developed western and central regions suffer from the emission leakage...... on the regional features of industrial emissions is critical to better decision makings. While to date, related studies have been rather few. This paper applies a spatial analysis on regional features of China's industrial emissions (SO2, NOx and PM2.5 and CO2 emission) in 31 provinces. Spatial autocorrelation...

  11. Soil and groundwater remediation through the program of energy research and development at Environment Canada

    International Nuclear Information System (INIS)

    Bacchus, P.

    2005-01-01

    Research and development in groundwater and soil remediation within the federal Program of Energy Research and Development (PERD) are conducted in the context of activities related to the oil and gas industry. Contamination of groundwater and soil by the oil and gas sector affects the health of ecosystems and the economic viability of impacted lands. This paper presented an outline of remediation research and development activities associated with PERD, as well as an overview of PERD's development of improved generic remediation technologies and approaches for use by industries. In addition, issues concerning the development of key guidelines, methods and protocols for use by regulators were discussed. Science and technology efforts within PERD contribute to the development of national standards and guidelines concerning public safety and environmental needs

  12. The cooperation of the government and digital media industry in social development (a study in Cirebon city, West Java, Indonesia)

    Science.gov (United States)

    Kusuma, M.; Mariana, D.; Anwar, R. K.

    2018-03-01

    This study explores the role of government in encouraging and providing a model of economic growth, including in the field of micro, small, and medium enterprises. The case studied in this research is the digital media industry. It could be a potential in creating public welfare. The questions in this research are about how to model a development of community-based digital media industry in Cirebon City, West Java; whether the government could bring people to the digital media industry to foster a productive economic society; and how the community appreciates and becomes a part of the digital media industry. By using descriptive and qualitative methods, this study finds that the government has sufficiently active roles in the development of the digital media industry in the society. The society itself has already been open-minded in responding the government’s programs and the development of contemporary technology, such as in the field of selling goods and services. Still, some obstacles might continue to be refined for the success of the community’s digital media industry.

  13. Impact of Corporate Governance on Research and Development Investment in the Pharmaceutical Industry in South Korea.

    Science.gov (United States)

    Lee, Munjae

    2015-08-01

    The purpose of this study is to analyze the influence of the corporate governance of pharmaceutical companies on research and development (R&D) investment. The period of the empirical analysis is from 2000 to 2012. Financial statements and comments in general, and internal transactions were extracted from TS-2000 of the Korea Listed Company Association. Sample firms were those that belong to the medical substance and drug manufacturing industries. Ultimately, 786 firm-year data of 81 firms were included in the sample (unbalanced panel data). The shareholding ratio of major shareholders and foreigners turned out to have a statistically significant influence on R&D investment (p ratio of institutional investors and the ratio of outside directors. The higher the shareholding ratio of the major shareholders, the greater the R&D investment. There will be a need to establish (or switch to) a holding company structure. Holding companies can directly manage R&D in fields with high initial risks, and they can diversify these risks. The larger the number of foreign investors, the greater the R&D investment, indicating that foreigners directly or indirectly impose pressure on a manager to make R&D investments that bring long-term benefits.

  14. [A critical assessment of the relation between the food industry and health research].

    Science.gov (United States)

    León Mengíbar, Josep; Pastor-Valero, María; Hernández Aguado, Ildefonso

    To describe the influence of the food industry in health research, observing how funding influences health outcomes and the quality of the studies. We performed a systematic review in MEDLINE, Cochrane Library Plus and Scopus using the MESH "Food Industry", "Food-Processing Industry", "Biomedical Research", "Research Support as Topic", and the keywords "Industry Sponsorship" and "Funding Source". The quality was assessed using the PRISMA guidelines. We revised 1,506 articles and 10 were included; two reviewed the relationship between funding-outcomes and quality-outcomes; six focused on the funding-outcomes relationship; and the other two focused on methodological quality. Six showed that funding from the food industry resulted in more favourable outcomes for their products. No differences in quality were found in relation to the funding source, but those which did not declare their funding had a worse quality. Studies funded by the food industry showed favourable results for their products. However, this fact did not affect the quality of the studies. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  15. Development of Ceramic Coating on Metal Substrate using Industrial Waste and Ore Minerals

    Science.gov (United States)

    Bhuyan, S. K.; Thiyagarajan, T. K.; Mishra, S. C.

    2017-02-01

    The technological advancement in modern era has a boon for enlightening human life; but also is a bane to produce a huge amount of (industrial) wastes, which is of great concern for utilization and not to create environmental threats viz. polution etc. In the present piece of research work, attempts have been made to utilize fly ash (wastes of thermal power plants) and along with alumina bearing ore i.e. bauxite, for developing plasma spray ceramic coatings on metals. Fly ash and with 10 and 20% bauxite addition is used to deposit plasma spray coatings on a metal substrate. The surface morphology of the coatings deposited at different power levels of plasma spraying investigated through SEM and EDS analysis. The coating thickness is measured. The porosity levels of the coatings are evaluated. The coating hardness isalso measured. This piece of research work will be beneficial for future development and use of industrial waste and ore minerals for high-valued applications.

  16. CUEPRA-Clemson University electric power research association: An industry/university partnership for excellence in power engineering education and research

    International Nuclear Information System (INIS)

    Girgis, A.A.; Makram, E.B.; Cline, M.L.; Fortson, H.S.

    1993-01-01

    A unique structure for the Clemson University Electric Power Research Association (CUEPRA) has been established to promote electric power system research and to meet the need for a working communication link between the power industry and the academic community. This paper presents the power industries involvement in the power program at Clemson University and the strategic improvements that have been accomplished in research and education

  17. Laboratory Directed Research and Development FY 2000

    International Nuclear Information System (INIS)

    Hansen, Todd; Levy, Karin

    2001-01-01

    The Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab or LBNL) is a multi-program national research facility operated by the University of California for the Department of Energy (DOE). As an integral element of DOE's National Laboratory System, Berkeley Lab supports DOE's missions in fundamental science, energy resources, and environmental quality. Berkeley Lab programs advance four distinct goals for DOE and the nation: (1) To perform leading multidisciplinary research in the computing sciences, physical sciences, energy sciences, biosciences, and general sciences in a manner that ensures employee and public safety and protection of the environment. (2) To develop and operate unique national experimental facilities for qualified investigators. (3) To educate and train future generations of scientists and engineers to promote national science and education goals. (4) To transfer knowledge and technological innovations and to foster productive relationships among Berkeley Lab's research programs, universities, and industry in order to promote national economic competitiveness. Annual report on Laboratory Directed Research and Development for FY2000

  18. Applied research and development of neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Bak, Sung Ryel; Park, Yong Chul; Kim, Young Ki; Chung, Hwan Sung; Park, Kwang Won; Kang, Sang Hun

    2000-05-01

    This report is written for results of research and development as follows : improvement of neutron irradiation facilities, counting system and development of automation system and capsules for NAA in HANARO ; improvement of analytical procedures and establishment of analytical quality control and assurance system; applied research and development of environment, industry and human health and its standardization. For identification and standardization of analytical method, environmental biological samples and polymer are analyzed and uncertainity of measurement are estimated. Also data intercomparison and proficency test were performed. Using airborne particulate matter chosen as a environmental indicators, trace elemental concentrations of sample collected at urban and rural site are determined and then the calculation of statistics and the factor analysis are carried out for investigation of emission source. International cooperation research project was carried out for utilization of nuclear techniques.

  19. Applied research and development of neutron activation analysis

    International Nuclear Information System (INIS)

    Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Bak, Sung Ryel; Park, Yong Chul; Kim, Young Ki; Chung, Hwan Sung; Park, Kwang Won; Kang, Sang Hun

    2000-05-01

    This report is written for results of research and development as follows : improvement of neutron irradiation facilities, counting system and development of automation system and capsules for NAA in HANARO ; improvement of analytical procedures and establishment of analytical quality control and assurance system; applied research and development of environment, industry and human health and its standardization. For identification and standardization of analytical method, environmental biological samples and polymer are analyzed and uncertainity of measurement are estimated. Also data intercomparison and proficency test were performed. Using airborne particulate matter chosen as a environmental indicators, trace elemental concentrations of sample collected at urban and rural site are determined and then the calculation of statistics and the factor analysis are carried out for investigation of emission source. International cooperation research project was carried out for utilization of nuclear techniques

  20. Collaborative Innovation Research on High-tech Industry in the Center Delta

    Directory of Open Access Journals (Sweden)

    Yan Jingdong

    2017-01-01

    Full Text Available As a strong point in the Middle Rises Strategy, the Center Delta is of great significance to high-tech industry development. While the collaborative innovation is an effective way to promote the coordinated development of regional economy. This article selected electronic and communication equipment manufacturing industry of 3 provinces in the Center Delta as samples, built evaluation index system of collaborative innovation of high-tech industry, and put the relevant data into the system coordination degree model, in order to get the synergy of industrial innovation system and innovation environment system of 3 provinces. The empirical results shown that the industrial innovation system and innovation environment system coordination degree of Hubei province was the highest, while Jiangxi province was the lowest. Based on the empirical result analysis of the above-mentioned systems, this article put forward suggestions to promote the development of the high-tech industry collaborative innovation in the Center Delta.

  1. Wood product industry - present state and studies of the development alternatives; Puuteollisuuden nykytilan ja haasteiden arviointia

    Energy Technology Data Exchange (ETDEWEB)

    Holmijoki, O.; Paajanen, T.; Kairi, M.

    2007-07-01

    In this research project the development of the wood products industry and its operating environment in Finland was studied using statistical data mainly from years 1995 - 2003. In this context, the wood products industry includes the sawmilling industry, the plywood and other wood panel industry, prefabricated wooden housing and the building joinery industry, wood packing manufacture and the manufacture of other wooden products. The development of the wood products industry and its operating environment has been estimated by combining statistical data about the business economy, production economy and the national economy from the Central Statistical Office of Finland together with data from the Finnish Forest Research Institute. Based on statistical data, the wood product markets, profitability and cost structure of branches, input market, use of labour force and investments have been studied. The economic importance of the wood products industry has been estimated at a national and a local level. Challenges facing wood products industry branches have been analysed using example calculations based on input-output theory. In the evaluation method, the business environment of the wood products industry branches and related branches, have been described with a use table at basic prices commonly using in the national economy. This method has enabled the direct and indirect effects of simultaneous quantity and price changes occurring in the wood product markets and markets related to the wood product industry, to be analysed. In the example calculations, variation of sawn timber production and log import, as well as the increments of sawn timber upgrading, wood product usage in building, wood panel production and purchase energy price, were reviewed

  2. Smart Industry Research in the Field of HRM : Resetting Job Design as an Example of Upcoming Challenges

    NARCIS (Netherlands)

    Habraken, Milou Maria Petronella; Bondarouk, Tatiana; Bondarouk, Tanya; Ruel, Huub; Parry, Emma

    2017-01-01

    Purpose – This chapter aims to encourage and guide Smart Industry HRM-related research by addressing upcoming challenges developed using a Job Design lens. Methodology/approach – The challenges are constructed based on a developed overview of the existing body of work related to Job Design and a

  3. Development of Industrial High-Speed Transfer Parallel Robot

    International Nuclear Information System (INIS)

    Kim, Byung In; Kyung, Jin Ho; Do, Hyun Min; Jo, Sang Hyun

    2013-01-01

    Parallel robots used in industry require high stiffness or high speed because of their structural characteristics. Nowadays, the importance of rapid transportation has increased in the distribution industry. In this light, an industrial parallel robot has been developed for high-speed transfer. The developed parallel robot can handle a maximum payload of 3 kg. For a payload of 0.1 kg, the trajectory cycle time is 0.3 s (come and go), and the maximum velocity is 4.5 m/s (pick amp, place work, adept cycle). In this motion, its maximum acceleration is very high and reaches approximately 13g. In this paper, the design, analysis, and performance test results of the developed parallel robot system are introduced

  4. Nuclear Research and Development in the AEC Era

    International Nuclear Information System (INIS)

    Mongkolnavin, R.

    2014-01-01

    In 2015, South East Asian Countris are entering into the social, economic and security partnership. Nuclear Research and Development undoubtedly has important roles in all three pillars. Nuclear applications that are being realised in the region ranges from energy, mrdical to agricultural application.In this new era of cooperation, we are seeking for technologies that lead to solution to improve our ways of living. As all other research and development nuclear research has been carried out in all countries in the region. However, it does have its critiques on safety issues based on people capability in the region. In order to make progress in research and development, human resource development is the key fundamental to its sucess. An experience of regional collaboration in developing pulsed neutron souurce is presented as an example. The research had been revived though collaoration of different research laboratories within ASEAN countries with support of Asian African Assosiation for Plasma Training (AAAPT). The 'low cost research theme' has fundamentally set up a platform for more future advanced research for fusion and for local industrial applications. It also increases experimental and theoretical research awareness among new generations that could be carried out in local laboratories. A device such as UNU-ICPT Plasma Focus has been explored, and it has been built, studied; both theoretical and experimental; and used for many different kind of applications.

  5. Benchmarking the scientific output of industrial wastewater research in Arab world by utilizing bibliometric techniques.

    Science.gov (United States)

    Zyoud, Shaher H; Al-Rawajfeh, Aiman E; Shaheen, Hafez Q; Fuchs-Hanusch, Daniela

    2016-05-01

    Rapid population growth, worsening of the climate, and severity of freshwater scarcity are global challenges. In Arab world countries, where water resources are becoming increasingly scarce, the recycling of industrial wastewater could improve the efficiency of freshwater use. The benchmarking of scientific output of industrial wastewater research in the Arab world is an initiative that could support in shaping up and improving future research activities. This study assesses the scientific output of industrial wastewater research in the Arab world. A total of 2032 documents related to industrial wastewater were retrieved from 152 journals indexed in the Scopus databases; this represents 3.6 % of the global research output. The h-index of the retrieved documents was 70. The total number of citations, at the time of data analysis, was 34,296 with an average citation of 16.88 per document. Egypt, with a total publications of 655 (32.2 %), was ranked the first among the Arab countries followed by Saudi Arabia 300 (14.7 %) and Tunisia 297 (14.6 %). Egypt also had the highest h-index, assumed with Saudi Arabia, the first place in collaboration with other countries. Seven hundred fifteen (35.2 %) documents with 66 countries in Arab/non-Arab country collaborations were identified. Arab researchers collaborated mostly with researchers from France 239 (11.7 %), followed by the USA 127 (6.2 %). The top active journal was Desalination 126 (6.2 %), and the most productive institution was the National Research Center, Egypt 169 (8.3 %), followed by the King Abdul-Aziz University, Saudi Arabia 75 (3.7 %). Environmental Science was the most prevalent field of interest 930 (45.8 %). Despite the promising indicators, there is a need to close the gap in research between the Arab world and the other nations. Optimizing the investments and developing regional experiences are key factors to promote the scientific research.

  6. Research and development for the nuclear energy of the future

    International Nuclear Information System (INIS)

    Bernard, P.

    2002-01-01

    In the framework of the energy demand increase facing the environment protection, the three main objectives of the research and development for the nuclear energy are developed in this document: to support the today nuclear industry, to answer the public anxiety concerning the sanitary and environmental impact of nuclear activities, to design, evaluate and develop new reactors. (A.L.B.)

  7. Alcohol industry influence on UK alcohol policy: A new research agenda for public health.

    Science.gov (United States)

    Hawkins, Benjamin; Holden, Chris; McCambridge, Jim

    2012-09-01

    The British government has been criticised for according industry interests too much weight in alcohol policy-making. Consequently, it has been argued that alcohol strategy in the UK is built around policies for which the evidence base is weak. This has clear implications for public health. The purpose of this commentary is to map recent developments in UK alcohol policy and related debates within the alcohol policy literature, thus laying the foundations for a systematic examination of the influence of the alcohol industry on alcohol policy. It highlights the changing structure of the industry and summarises what is known about the positions and strategies of industry actors towards alcohol policy. In so doing, it aims to contribute not just to debates about alcohol policy, but to a broader understanding of health policy processes and the relationships between government and other stakeholders. It advances a new research agenda focused on the role of corporate actors in the field of alcohol policy and public health more broadly.

  8. Research and development project in fiscal 1988 for fundamental technologies for next generation industries. Achievement report on research and development on high-efficiency polymer separating film materials; 1988 nendo kokoritsu kobunshi bunrimaku zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-03-01

    In order to achieve improvements in efficiency and energy conservation in the separating processes used in the chemical industries, research and development has been performed on liquid separating films, air separating films, and their related technologies. This paper summarizes the achievement in fiscal 1988. In the research of high-level molecule recognizing film in the air selecting and separating films, researches were made on the elementary technologies for the mechanism of reaction of O{sub 2} carrier with O{sub 2}, reversible reactivity of CO carrier with CO, and carrier fixation. In the research of high-density metallic complex fixing thin films, investigations were made on the oxygen affinity and temperature characteristics of active type CoVPH complex involved in carrier transportation in the polymeric complex interface film. In the research of high-function complex films, development was performed on a new carrier that can be dispersed stably and finely without making association even under high concentrations. Conditions for compounding into hollow fibers were discussed, and the film forming conditions for composite films having no pinholes were discovered. With regard to the liquid selecting and separating films, researches were made on the alcohol condensing film, water-polar organics separating fluorine-based polymer film, structural control on water selective permeation film, and water-acetic acid separating film. (NEDO)

  9. Center for Fuel Cell Research and Applications development phase. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    The deployment and operation of clean power generation is becoming critical as the energy and transportation sectors seek ways to comply with clean air standards and the national deregulation of the utility industry. However, for strategic business decisions, considerable analysis is required over the next few years to evaluate the appropriate application and value added from this emerging technology. To this end the Houston Advanced Research Center (HARC) is proposing a three-year industry-driven project that centers on the creation of ``The Center for Fuel Cell Research and Applications.`` A collaborative laboratory housed at and managed by HARC, the Center will enable a core group of six diverse participating companies--industry participants--to investigate the economic and operational feasibility of proton-exchange-membrane (PEM) fuel cells in a variety of applications (the core project). This document describes the unique benefits of a collaborative approach to PEM applied research, among them a shared laboratory concept leading to cost savings and shared risks as well as access to outstanding research talent and lab facilities. It also describes the benefits provided by implementing the project at HARC, with particular emphasis on HARC`s history of managing successful long-term research projects as well as its experience in dealing with industry consortia projects. The Center is also unique in that it will not duplicate the traditional university role of basic research or that of the fuel cell industry in developing commercial products. Instead, the Center will focus on applications, testing, and demonstration of fuel cell technology.

  10. Competitiveness of the Garment Industry on the Basis of the Industrial Cluster Establishment

    Directory of Open Access Journals (Sweden)

    Tatiana Dmitrievna Sinyavets

    2016-03-01

    Full Text Available The issue of the development prospects of the Russian economy and the economy of its individual branches in the regions is highly relevant in terms of the increasing crises and economic development challenges. The scope of the study is a garment industry of the Siberian Federal District, which includes 12 subjects, and only six of them develop the garment industry actively. There are the regions of Kemerovo, Novosibirsk, Omsk, Tomsk, Krasnoyarsk Krai and the Republic of Khakassia. The subject matter of the research is the state and prospects of the garment industry of the Siberian Federal District. It also includes the assessment of the garment industry as one of the sub-sectors of the light industry in terms of its competitiveness in the domestic market. The purpose of the comprehensive study is to determine the conditions and factors affecting the development of the industry, as well as to identify its development reserves and competitiveness on the basis of industrial cluster’s generation. The hypothesis of this study is that in the Siberian Federal District, there are a need and reserves to create a cluster of the garment industry. The main methods of the study are the comparative analysis, the expert assessment of the sector in certain regions of the Siberian Federal District, as well as the assessment of possible formation of the industrial cluster in the region. The results of the study are the evaluation of the competitiveness and prospects of the garment industry in Russia and the Siberian Federal District (a low level of development and competitiveness; the evaluation of the development level of the garment industry in the Federal District, which have showed the demand for apparel products from the population and enterprises, as well as the conditions for the provision of clothing manufacture with natural fabrics and synthetic materials, labor resources and research and development achievements; also the justification of the existing

  11. Planning research on the next strategical project through the trend analysis on radiation fusion technology, industry and policy

    International Nuclear Information System (INIS)

    Kim, Dong Sub; Choi, Jae Hak; Kim, Tak Hyun

    2013-01-01

    Ο The planning research for establish a detailed implementation strategy to serve as small, but a strong institution leading national radiation research and resolving the pending issues related to using radiation - Now is a time when it needs a implementation strategy to achieve it's unique mission as the sole radiation-specialized research institute leading to promote the radiation industry. Ο The main background of this study is to build the planning of a new paradigm for research and development to cope with the changing domestic and international environment for sustainable growth - As the domestic regional radiation field is getting more competitive and the cooperative group expands, it needs to adapt to the global trend such as technology convergence and acceleration etc.. - The need for establish basic database to make a new strategy in order to narrow the technology gap in the radiation fusion technology comparing to the developed country and cope with emerging country's advancement in technology Ο The use to build basic database to spearhead the project and set aside a budget effectively - It's to be used as a reference to set aside a budget through planning strategy industry field to forecast the industrial demand and variation of the future policy and create blue ocean and niche markets

  12. Factor Influencing Creative Industries Development in Kenjeran Surabaya

    Science.gov (United States)

    Siswanto, V. K.; Santoso, E. B.

    2017-07-01

    Indonesia needs to improve the competitiveness of local products to optimize its contribution to the ASEAN Economic Community (AEC) for the welfare of the population. This can be done by improving the development of creative industries. Kenjeran Sub District is one of the coastal villages in the city of Surabaya, which has a large number of poor people. The potential of the creative industries is still not visible in efforts to increase public welfare. Therefore, it is necessary to investigate the factors that influence the development of creative industries in Kenjeran. This study using in-depth interview were analysed using content analysis and Cartesian diagram to determine the important factors that affect the development of creative industries in Sub district of Kenjeran. By using five respondents from the government shows that the factors that have a high level of importance and advantages are low among other regulatory factors of raw materials, import and export, extortion, and administrative procedures.

  13. Industrial science and technology frontier program progress reports for fiscal 1998. Research and development of synergy ceramics; 1998 nendo synergy ceramics no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In relation with research and development of 'synergy ceramics' which have begun since fiscal 1994 under a joint organization of the industries, Government and academic circles, reports were given on the achievement status of the whole of the first stage of the project, together with the results of researches made in fiscal 1998. With regard to high-order structure control technologies, reports were given on the following subjects: precursor design, structure formation design, nano-structure process and structuring reaction process as the basic technologies for structure creation, and inter-hierarchy deposition reaction control, phase boundary formation control, anisotropic particle interface control and high-order space production control as the structural element control technologies. With respect to analysis and evaluation technologies, reports were given on research achievements in fundamental technologies for analysis and evaluation, and property developing element evaluation technologies. In the field of overall survey and study, various committees and study meetings were held, research projects were planned, and technological trends were surveyed, whose results were reported. In the joint researches, reports were given on the survey and study on new material creation by means of high-order structure control, and the research on high-order structure control of ceramics by means of structuring reaction process control. (NEDO)

  14. Industrial science and technology frontier program progress reports for fiscal 1998. Research and development of synergy ceramics; 1998 nendo synergy ceramics no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In relation with research and development of 'synergy ceramics' which have begun since fiscal 1994 under a joint organization of the industries, Government and academic circles, reports were given on the achievement status of the whole of the first stage of the project, together with the results of researches made in fiscal 1998. With regard to high-order structure control technologies, reports were given on the following subjects: precursor design, structure formation design, nano-structure process and structuring reaction process as the basic technologies for structure creation, and inter-hierarchy deposition reaction control, phase boundary formation control, anisotropic particle interface control and high-order space production control as the structural element control technologies. With respect to analysis and evaluation technologies, reports were given on research achievements in fundamental technologies for analysis and evaluation, and property developing element evaluation technologies. In the field of overall survey and study, various committees and study meetings were held, research projects were planned, and technological trends were surveyed, whose results were reported. In the joint researches, reports were given on the survey and study on new material creation by means of high-order structure control, and the research on high-order structure control of ceramics by means of structuring reaction process control. (NEDO)

  15. Polyfire project- an example of an industrial research project promoting safe industrial production of fire-resistant nanocomposites

    International Nuclear Information System (INIS)

    Vaquero, C; Lopez de Ipina, J; Galarza, N; Hargreaves, B; Weager, B; Breen, C

    2011-01-01

    New developments based on nanotechnology have to guarantee safe products and processes to be accepted by society. The Polyfire project will develop and scale-up techniques for processing halogen-free, fire-retardant nanocomposite materials and coatings based on unsaturated polyester resins and organoclays. The project includes a work package that will assess the Health and Environmental impacts derived from the manipulation of nanoparticles. This work package includes the following tasks: (1) Identification of Health and Environment Impacts derived from the processes, (2) Experimentation to study specific Nanoparticle Emissions, (3) Development of a Risk Management Methodology for the process, and (4) A Comparison of the Health and Environmental Impact of New and Existing Materials. To date, potential exposure scenarios to nanomaterials have been identified through the development of a Preliminary Hazard Analysis (PHA) of the new production processes. In the next step, these scenarios will be studied and simulated to evaluate potential emissions of nanomaterials. Polyfire is a collaborative European project, funded by the European Commission 7th Framework Programme (Grant Agreement No 229220). It features 11 partners from 5 countries (5 SMEs, 3 research institutes, 2 large companies, 1 association) and runs for three years (1st September 2009 - 31st August 2012). This project is an example of an industrial research development which aims to introduce to the market new products promoting the safe use of nanomaterials.

  16. Polyfire project- an example of an industrial research project promoting safe industrial production of fire-resistant nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Vaquero, C; Lopez de Ipina, J; Galarza, N [TECNALIA, Leonardo Da Vinci No 11, 01510 Minano (Alava) (Spain); Hargreaves, B; Weager, B [NetComposites Ltd, 4A Broom Business Park, Chesterfield S41 9QG (United Kingdom); Breen, C, E-mail: celinav@leia.es [Materials and Engineering Research Institute, Sheffield Hallam University, Sheffield S1 1WB (United Kingdom)

    2011-07-06

    New developments based on nanotechnology have to guarantee safe products and processes to be accepted by society. The Polyfire project will develop and scale-up techniques for processing halogen-free, fire-retardant nanocomposite materials and coatings based on unsaturated polyester resins and organoclays. The project includes a work package that will assess the Health and Environmental impacts derived from the manipulation of nanoparticles. This work package includes the following tasks: (1) Identification of Health and Environment Impacts derived from the processes, (2) Experimentation to study specific Nanoparticle Emissions, (3) Development of a Risk Management Methodology for the process, and (4) A Comparison of the Health and Environmental Impact of New and Existing Materials. To date, potential exposure scenarios to nanomaterials have been identified through the development of a Preliminary Hazard Analysis (PHA) of the new production processes. In the next step, these scenarios will be studied and simulated to evaluate potential emissions of nanomaterials. Polyfire is a collaborative European project, funded by the European Commission 7th Framework Programme (Grant Agreement No 229220). It features 11 partners from 5 countries (5 SMEs, 3 research institutes, 2 large companies, 1 association) and runs for three years (1st September 2009 - 31st August 2012). This project is an example of an industrial research development which aims to introduce to the market new products promoting the safe use of nanomaterials.

  17. PTAC 2003 annual report : creating value through innovation : facilitating innovation, technology transfer, and collaborative research and development in the upstream oil and gas industry

    International Nuclear Information System (INIS)

    2004-01-01

    Petroleum Technology Alliance Canada (PTAC) is Canada's leading organization that helps in the development and transfer of petroleum technology. This annual report listed the key achievements in 2003, and presented an outlook for 2004. PTAC hosted 16 forums, workshops and conferences in 2003 which focused on specific needs or technical areas. The organization also facilitated 18 Technology Information Sessions in 2003 for members to promote interest, feedback and participation or funding for new research and development projects and to find industry partners. The projects launched in 2003 focused on the following issues: driving safety, e-business, emission reduction, eco-efficiency, environment, heavy oil, and innovation. In 2003, PTAC conducted a web survey and sent out two questionnaires to gain industry feedback on various topics. This annual report includes an auditor's report of PTAC's financial statements. The report includes summarized balance sheet of assets, liabilities/surplus and net assets. It also includes summarized statements of revenues, expenses and surplus for the year ended December 31, 2003 with comparative figures for 2002. 1 tab

  18. Water, job creation, industrial development and the implementation of sustainable development goals in Africa

    CSIR Research Space (South Africa)

    Simalabwi, Alex

    2017-01-01

    Full Text Available , 2017 Pretoria, South Africa Water, Jobs, Industrial development and implementation of SDGs in Africa www.gwp.org October 2017 2/19 Outline 1. Introduction: industry and its linkages with resources, other devts., society) 2. Some initiatives.....GWP Africa and AU collaboration Water, Jobs, Industrial development and implementation of SDGs in Africa www.gwp.org October 2017 8/19 Water SDG Investment and Financing Water, Climate and Development Integrated Urban Water Management...

  19. Developing Learning Tool of Control System Engineering Using Matrix Laboratory Software Oriented on Industrial Needs

    Science.gov (United States)

    Isnur Haryudo, Subuh; Imam Agung, Achmad; Firmansyah, Rifqi

    2018-04-01

    The purpose of this research is to develop learning media of control technique using Matrix Laboratory software with industry requirement approach. Learning media serves as a tool for creating a better and effective teaching and learning situation because it can accelerate the learning process in order to enhance the quality of learning. Control Techniques using Matrix Laboratory software can enlarge the interest and attention of students, with real experience and can grow independent attitude. This research design refers to the use of research and development (R & D) methods that have been modified by multi-disciplinary team-based researchers. This research used Computer based learning method consisting of computer and Matrix Laboratory software which was integrated with props. Matrix Laboratory has the ability to visualize the theory and analysis of the Control System which is an integration of computing, visualization and programming which is easy to use. The result of this instructional media development is to use mathematical equations using Matrix Laboratory software on control system application with DC motor plant and PID (Proportional-Integral-Derivative). Considering that manufacturing in the field of Distributed Control systems (DCSs), Programmable Controllers (PLCs), and Microcontrollers (MCUs) use PID systems in production processes are widely used in industry.

  20. Internationalization as a strategy to overcome industry barriers-An assessment of the marine energy industry

    International Nuclear Information System (INIS)

    Lovdal, Nicolai; Neumann, Frank

    2011-01-01

    Research on conditions to develop new innovations within emerging renewable energy industries is often done with a national focus. However, recent research on international entrepreneurship has revealed that firms operate on international levels very early in their life time. Thus, based on former research on international entrepreneurship and case examples, we build the propositions that firms in the marine energy industry use internationalization as a strategy to overcome industry barriers. Our primary source of data is a unique dataset from a global survey of all the companies in the marine energy industry who are aiming to commercialize a wave or tidal energy device. This paper is organized in two steps: first we identified the most challenging industry barriers perceived by companies. Second we use these to form propositions which we assess through empirical data. The two most challenging barriers perceived by the companies are need for capital and need for supportive political schemes. Our findings reveal that internationalization certainly is a common strategy to access capital and attractive support schemes in foreign countries. The early internationalization has implications for researchers, managers and policy makers. - Research highlights: → Industry barriers identified as access to capital and supportive political schemes. → International entrepreneurship is used to overcome industry barriers. → Start-ups in emerging energy industries 'shop' national support schemes. → Future research to provide policy advice should adapt to the international reality. → Research based on a worldwide survey of wave and tidal energy device developers.