Mining and sustainable development: environmental policies and programmes of mining industry associations

International Nuclear Information System (INIS)

Miller, C.G.

1997-01-01

Mining industry policies and practices have evolved rapidly in the environmental area, and more recently in the social area as well. Mining industry associations are using a variety of methods to stimulate and assist their member companies as they improve their environmental, social and economic performance. These associations provide opportunities for companies to use collaborative approaches in developing and applying improved technology, systems and practices (author)

Economical Recovery of By-products in the Mining Industry

Energy Technology Data Exchange (ETDEWEB)

Berry, J.B.

2001-12-05

The U.S. Department of Energy (DOE) Office of Industrial Technologies, Mining Industry of the Future Program, works with the mining industry to further the industry's advances toward environmental and economic goals. Two of these goals are (1) responsible emission and by-product management and (2) low-cost and efficient production (DOE 1998). DOE formed an alliance with the National Mining Association (NMA) to strengthen the basis for research projects conducted to benefit the mining industry. NMA and industry representatives actively participate in this alliance by evaluating project proposals and by recommending research project selection to DOE. Similarly, the National Research Council (NRC) has recently and independently recommended research and technology development opportunities in the mining industry (NRC 2001). The Oak Ridge National Laboratory (ORNL) and Colorado School of Mines engineers conducted one such project for DOE regarding by -product recovery from mining process residue. The results of this project include this report on mining industry process residue and waste with opportunity for by-product recovery. The U.S. mineral processing industry produces over 30,000,000 metric tons per year of process residue and waste that may contain hazardous species as well as valuable by-products. This study evaluates the copper, lead, and zinc commodity sectors which generate between 23,300,000 and 24,000,000 metric tons per year. The distribution of residual elements in process residues and wastes varies over wide ranges* because of variations in the original ore content as it is extracted from the earth's crust. In the earth's crust, the elements of interest to mining fall into two general geochemical classifications, lithophiles and chalcophiles** (Cox 1997). Groups of elements are almost always present together in a given geochemical classification, but the relative amounts of each element are unique to a particular ore body. This paper

Metal Separations and Recovery in the Mining Industry

Science.gov (United States)

Izatt, Steven R.; Bruening, Ronald L.; Izatt, Neil E.

2012-11-01

Molecular Recognition Technology (MRT) plays an important role in the hydrometallurgical processing dissolved entities in solutions in the mining industry. The status of this industry with respect to sustainability and environmental issues is presented and discussed. The roles of MRT and ion exchange in metal separation and recovery processes in the mining industry are discussed and evaluated. Examples of MRT separation processes of interest to the mining community are given involving gold, cobalt purification by extraction of trace cadmium, rhenium, and platinum group metals (PGMs). MRT processes are shown to be sustainable, economically viable, energy efficient, and environmentally friendly, and to have a low carbon footprint.

The Empirical Relationship between Mining Industry Development and Environmental Pollution in China.

Science.gov (United States)

Li, Gerui; Lei, Yalin; Ge, Jianping; Wu, Sanmang

2017-03-02

This study uses a vector autoregression (VAR) model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2) chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3) tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries.

The Empirical Relationship between Mining Industry Development and Environmental Pollution in China

Directory of Open Access Journals (Sweden)

Gerui Li

2017-03-01

Full Text Available This study uses a vector autoregression (VAR model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1 because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2 chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3 tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries.

How the environmental community views the mining industry

International Nuclear Information System (INIS)

Maest, A.

1990-01-01

Working with the Environmental Mining Network, a coalition of ∼75 environmental groups nationwide formed to encourage environmentally-sound hard-rock mining. Emphasis is on changing the industrial process so that wastes are not created in the first place, instead of creating the wastes and dealing with them as an afterthought. The tradition of pollution control is slowly being replaced with prevention. Objectives of pollution prevention for mining include: Reduction of the volume of material extracted, beneficiated, processed, and removed for exploration by improving techniques for these processes, mining less, and encouraging remining and use of scrap materials; Reduction of the toxicity and environmental impact of wastes that are nonetheless generated by employing techniques that minimize the release of contaminants to the environment; Identifying current and developing technologies for pollution prevention in the mining industry and distribute this among the regulated community. Pollution prevention should be incorporated in design and performance standards. Assessment and demonstration of pollution prevention should be part of the permit application. Implementation of serious non-rhetorical pollution prevention by the mining industry has the potential to give miners and environmentalists a common ground and common goals where we could truely be in a win-win situation in terms of encouraging both environmental and economic robustness

IMPROVING PERFORMANCES BY USING COST CONTROLLING IN THE MINING INDUSTRY ENTITIES

Directory of Open Access Journals (Sweden)

SORINEL CĂPUŞNEANU

2016-06-01

Full Text Available The aim of this article is to highlight the improving performances of entities from mining industry entities by using cost controlling as an important tool of management accounting, applying the target costing method. The survey is based on questions that led investigation made in the Romanian entities from mining industry and based on data a thorough analysis was done for fulfillment of authors’ purpose. The results obtained by applying the target costing method has allowed a very strict cost control, which ultimately led to increased performances of economic entities from mining industry in Romania. The secondary purpose of this article is to try adjusting the target costing method to the specific of entities in the mining industry. According to studies of specialists this method based on target costing calculation is rather unusual in this sector of mining industry and it relies heavily on the activity-based costing method. The article ends with the authors' conclusions on improving the performances of entities from mining industry based on cost controlling and use of mix information obtained through the applied methods

A Study on regeneration cases with industrial Heritage in mining areas of Korea

Science.gov (United States)

Cho, Seungyeoun; Ji, Sangwoo; Yim, Giljae

2017-04-01

The mining areas have to face urban decline problem in population and aging after its closing. Many mines were shut down due to changes in industrial structure through 20 century. Central and local governments has been trying to solve urban decline of abandoned mine areas by enacting special acts or introducing support programs for decades. In the year of 1995, South Korean government also enacted "Special act on the assistance to the development of abandoned mine areas" to promote the economy of abandoned mine areas that is depressed following the decline of the coal industry and to help balanced regional development and to improve the living standard of the residents in such abandoned mine areas. Local authorities has been trying to revitalize the regional economy by attracting tourism industry under the financial support and deregulation by this special law. With this background, this study analysis 13 regeneration cases which are utilizing the industrial heritage of the abandoned area in S. Korea. Despite the importance of mining, negative images of abandon mine have been engraved due to environmental destruction. Most of abandoned mines were left without any action since its closing. Early stage of abandoned mine area regeneration, such as Sabuk, Munkyong, are focusing on adjacent land not on abandoned mine. Abandoned mines were restored its original state and theme park including hotels, casinos and other tourist facilities were developed on adjacent land. Eco-trails on some granite caves such as Jungsun were opened to the public as natural resources not industrial heritage. The industrial heritage was very restricted to making museums about history of mining industry. However, there has been a significant change in perception toward reusing industrial heritage for urban regeneration in recent years. From the viewpoint of urban regeneration, abandon mine areas and its facilities are receiving attention as important regional assets as industrial heritage to

Environmental and community issues and the mining industry

International Nuclear Information System (INIS)

Crowson, P.

1998-01-01

Much has been said and written in recent years about the greatly increased difficulties faced by the mining industry in meeting the expectations of local communities and in adequately protecting the natural environment. The impression is often given that the industry was completely oblivious of such concerns and needs until the present decade, and that it is now struggling to make up for past neglect. Certainly the standards required by society as a whole have risen, and there is more public discussion that in earlier times, but the management of many major mining companies have long been fully aware of their obligations to the environment and local communities. To argue otherwise would be to misread the history of the industry and to perform a grave disservice to many dedicated managers of the mining projects of former years. (author)

Review of Wearable Device Technology and Its Applications to the Mining Industry

Directory of Open Access Journals (Sweden)

Mokhinabonu Mardonova

2018-03-01

Full Text Available This paper reviews current trends in wearable device technology, and provides an overview of its prevalent and potential deployments in the mining industry. This review includes the classification of wearable devices with some examples of their utilization in various industrial fields as well as the features of sensors used in wearable devices. Existing applications of wearable device technology to the mining industry are reviewed. In addition, a wearable safety management system for miners and other possible applications are proposed. The findings of this review show that by introducing wearable device technology to mining sites, the safety of mining operations can be enhanced. Therefore, wearable devices should be further used in the mining industry.

Radiation safety needs for the resurgent uranium mining industry

International Nuclear Information System (INIS)

Waggitt, Peter

2008-01-01

Full text: After many years in the economic doldrums the world's uranium industry is undergoing a renaissance. The recent rapid price increase for the product and the anticipated market shortfalls in supply of yellowcake have are responsible for this. There is now a rush of new activity: abandoned mines from a previous era are being re-examined for their potential to be re-opened; planning for exploitation of known but undeveloped uranium deposits is proceeding at a rapid pace in many countries new to uranium mining; and finally worldwide exploration activity for uranium is expanding at a great rate with more than 400 companies now claiming to be involved in the uranium mining market. All of there activities have significant implications the radiation protection profession. At every stage of the uranium production cycle, from exploration to mining and processing through to remediation there are requirements for proper radiation protection procedures and regulation. The long period of reduced activity in uranium mining has meant that few young people have been joining the industry over the past 20 years. There is now a shortage of trained and experienced radiation protection professionals associated with the mining industry that cannot be overcome overnight. The paper discusses the development of this situation and the various strategies that are being put in place around the world to improve the situation. In particular the International Atomic Energy Agency has been working with radiation protection authorities and uranium mining industry representatives from around the world to address the issue. The latest developments in this project will be described and the future plans described. (author)

Cubis AG - for the mining industry and for new markets

International Nuclear Information System (INIS)

Hamm, E.

1994-01-01

In Germany the research funds for the mining industry will again be cut drastically in future. Cubis must plan and use the remaining research funds in an optimum manner in conjunction with the mining industry itself and also the mining supply industry. Close cooperation and continuous coordination between the research institutes and industrial partners will continue to be necessary for this purpose. Transfer of technology between research and industrial application must take place more smoothly. It is not a question of marketing the implementation of results of individual research and development projects; on the contrary system solutions from one source are required and offered. Long-term business relationships with industrial partners, within the framework of which contract research, advice, engineering, training, etc. can be realised, are desirable. Cubis has undertaken the responsibility to make available services to the mining industry and involve itself in new markets with the released capacities. The success so far achieved by the new company shows that competence and potential to face up to the large tasks exist. Cubis is equipped to tackle the continuous challenge of technology and safety at work, but also the tasks in the raw material and environment sectors in the nineties and is the suitable partner for solution of problems. (orig.)

Balancing environmental and industry sustainability: a case study of the US gold mining industry.

Science.gov (United States)

Finnie, Bruce; Stuart, Jeffrey; Gibson, Linda; Zabriskie, Fern

2009-09-01

Mandatory insurance requirements and/or mitigation fees (royalties) for mining companies may help reduce environmental risk exposure for the federal government. Mining is examined since the Environmental Protection Agency (EPA) Toxic Release Inventory reveals that this sector produces more hazardous waste than any other industrial sector. Although uncommon, environmental expense can exceed hundreds of millions of dollars per development. Of particular concern is the potential for mines to become unfunded Superfund sites. Monte Carlo simulation of risk exposure is used to establish a plausible range of unfunded federal liabilities associated with cyanide-leach gold mining. A model is developed to assess these costs and their impact on both the federal budget and corporate profitability (i.e., industry sustainability), particularly if such costs are borne by offending firms.

[Pollution-ecological problems of old industrial and mining areas and future research prospects].

Science.gov (United States)

Zhou, Qixing

2005-06-01

Environmental pollution and its solicitation in ecological problems of old industrial and mining areas have become a worldwide technological puzzle restricting sustainable economic and social development. But, the definition and category of old industrial and mining areas is still disputed as an important concept. In this paper, the concept of old industrial and mining area was discussed in theory, and, proceeded with analyzing the complexity of current situation and environmental pollution problems of old industrial and mining areas in China, more keystone attention was paid to the secondary pollution problems from old industrial and mining areas as an important frontier of science. On the basis of expounding the complexity and characters of environmental pollution in old industrial and mining areas, it was suggested that as two key scientific problems in environmental sciences and ecology, the formation mechanisms and control technology of secondary pollution in old industrial and mining areas and the responses of new-type diseases to environmental pollution based on molecular ecotoxicology should be systematically studied on the national scale, and be an important component of environmental protection strategy in China in the future.

Mining in the Federal Republic of Germany 2012. Mining industries and statistics. 64th year 2013. Documentation

International Nuclear Information System (INIS)

2013-11-01

The annual report of the series ''The mining industry in the Federal Republic of Germany - Mountain Economics and Statistics'' is published by the Federal Ministry of Economics and Technology in cooperation with the mining authorities of the federal states. It contains comprehensive data of all production facilities of mining industry in Germany and describes the position of the German industry in the context of the overall economic development. The report shows an interest in local raw materials as well as on the international raw materials economy. Moreover, the present publication provides a detailed statistics section. [de

Special survey: mining industry

International Nuclear Information System (INIS)

Preece, H.

1981-01-01

South Africa is now the world's second biggest producer of non-oil minerals after the United States and far ahead of Canada and Australia, according to the author. South Africa's economic growth prospects over the 1980's are inevitably crucially dependent on the mining industry. The production and economics of various minerals are discussed, with special reference to gold, coal, diamonds, uranium, platinum, manganese, copper and asbestos

Public consent for mining: An industry viewpoint

International Nuclear Information System (INIS)

Zelms, J.L.

1990-01-01

The predominance of the mining industry was never intentionally destructive to the environment. Even when laws and regulations were far more relaxed than they are today, our operations were conducted professionally, But when change came, mining companies took a noncooperative attitude. We knew that we were the mining experts and that regulators or lawmakers were not. And it became accepted in our industry to stonewall change -- not to work with regulators and lawmakers but to resist change. This same attitude spilled over into attitudes with the media. Reporters were percieved as the enemy and many felt the press misrepresented their views. So we didn't work with the media unless we absolutely had to. In the process, industry did not participate in establishing guidelines and criteria for environmental regulation. Business ceded the environmental agenda to others and we have ended up with laws that forced billions of dollars of expenditures without ensuring that those expenditures had maximum impact on environmental problems. New rules are written by people less knowledgeable about the industry, consequently they cost more than they should and may not even have the desired result. Companies end up spending more than if they had addressed the problem themselves originally. It is no longer enough merely to be mining professionals. Today, it's only a threshold requirement for enduring success. We will best earn public consent to operate by anticipating what society will expect of us and by working to meet those expectations. We must set our own public policy before they become law or regulation and before we are branded as nonresponsive and noncaring

Uranium mining industry: the challenges and opportunities

International Nuclear Information System (INIS)

Dhar, B.B.

2009-01-01

In the global power generation nuclear industry plays a vital role in this modern era which is wholly energy driven. While the demand for nuclear power generation has been growing worldwide, concerns about supply of critical nuclear equipment is one of the key areas which supports the growth of the nuclear industry. As the reemergence of nuclear industry in the global energy arena indicates a significant growth of nuclear power, forecasting the demand for various critical equipment components is critical to industry's growth together with the supply of enriched/processed uranium and related services. India is stepping in this industry in a big way and with Indo-US Nuclear deal, it is going to be a world player in its own right. The basic raw material for nuclear energy is the uranium which has the potential to be highly dangerous substance when not treated in the proper manner, remaining radioactive for hundreds and thousand of years. Uranium mining could permanently damage the environment for tens of thousand of years, if not properly mined and managed

UST-IDRC national symposium on the mining industry and the environment: programme and abstracts

International Nuclear Information System (INIS)

1997-04-01

The National Symposium on the mining industry and the environment was organized by the UST/IDRC Environmental Research Group in the Department of Chemistry of the University of Science and Technology, Kumasi, Ghana. The symposium generally covered strategies for the development of the mining industry as well as solutions to the environmental problems associated with the industry in Ghana. The publication contains the programme and abstracts of scientific sessions of the Symposium. The abstracts covered the following topics among others: multi-element analysis of mineral ores samples, review of environmental studies related to gold mining in Ghana, local sulphooxidizing bacteria for environmentally friendly gold mining, arsenic pollution in streams and sediments, rainfall erositivity and soil loss from degraded lands and mine spoils, the impact of surface mining on forest structure and environment, current environmental practices in the mining industry, and the role of the mining industry in the economy of Ghana

Multiplier Accounting of Indian Mining Industry: The Application

Science.gov (United States)

Hussain, Azhar; Karmakar, Netai Chandra

2017-10-01

In the previous paper (Hussain and Karmakar in Inst Eng India Ser, 2014. doi: 10.1007/s40033-014-0058-0), the concepts of input-output transaction matrix and multiplier were explained in detail. Input-output multipliers are indicators used for predicting the total impact on an economy due to changes in its industrial demand and output which is calculated using transaction matrix. The aim of this paper is to present an application of the concepts with respect to the mining industry, showing progress in different sectors of mining with time and explaining different outcomes from the results obtained. The analysis shows that a few mineral industries saw a significant growth in their multiplier values over the years.

The Empirical Relationship between Mining Industry Development and Environmental Pollution in China

OpenAIRE

Li, Gerui; Lei, Yalin; Ge, Jianping; Wu, Sanmang

2017-01-01

This study uses a vector autoregression (VAR) model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2) che...

Country reports (Part 2). Country report on mining industry in Sabah Malaysia

Energy Technology Data Exchange (ETDEWEB)

Nordin, M S. B.

1988-06-25

In Sabah district of Malaysia, only one mining industry exists which is a joint venture between Japan and Malaysia, producing copper by consuming 500,000 tons/year of ore which contains 0.57% of copper and 0.65 gm/ton of gold. Regarding the mining industry, outline of its organization, process, equipments, and capacity are summarized. In addition, main clauses of safety regulation and its practises are explained. Concerning Burma, Governmental organization is shown as a graph and mining industries are divided into seven categories. Products, mining methods and capacities are explained by tables. (6 figs, 3 tables)

CEA and mining industry

International Nuclear Information System (INIS)

Anon.

2003-01-01

The French atomic energy commission (CEA) is involved in the mining industry in several ways: - in the front-end of the nuclear industry through its daughter companies and participations in the exploration and exploitation of uranium ores, but also of gold and alloy metals with a 26% participation in Eramet company, the world leader of manganese and nickel. This activity is the main occupation of Cogema daughter company, via the Areva holding; - in the back-end of the nuclear fuel cycle with the delicate problem of the management of radioactive wastes; - in parallel with the nuclear industry through an important activity in semiconductor materials (FCI and SMTElectronics); - and finally through various research works on several mineral compounds. This article focusses on the fuel cycle aspects of the CEA activities and concludes with the research works carried out today on thermonuclear fusion. (J.S.)

Queensland's mining industry vital to state and national economies

Energy Technology Data Exchange (ETDEWEB)

Austin, B

1987-04-01

Queensland's multi-billion dollar mining industry, and the industries it supports, continues to play a vital role in the economy of the State and the nation. According to Australian Bureau of Statistics figures, Queenland produces nearly half of the black coal mined in Australia, 70% of the copper, 54% of the silver, 42% of the lead, 31% of the zinc, 40% of the tungsten, 25% of the bauxite and tin, 46% of the rutile, and 9% of the gold.

Economic statistics for the mining and metallurgical industries: 1990. Statistique economique des industries extractives et metallurgiques annee 1990

Energy Technology Data Exchange (ETDEWEB)

Rzonzef, L.

1991-01-01

Provides economic statistics for the Belgian mining and metallurgical industries in 1990. The review is divided into 4 parts: the extractive industries (including an analysis of the coal market and mines, quarries and associated industries); coke and briquette making; metallurgy (i.e. blast furnaces, steel making, rolling mills and manpower and materials consumption in the steel industry); and the extraction of sand from the Belgian continental shelf. 17 tabs.

Usage of Safety Gloves in the Gold Mining Industry

CSIR Research Space (South Africa)

Scheepers, JCE

1978-10-01

Full Text Available The safety departments of 31 mines were visited, and the data obtained was used to determine to what extent safety gloves were being used in the gold mining industry. The frequency of occurrence of hand injuries amongst black workers of the gold...

Domestic uranium mining and milling industry 1991

International Nuclear Information System (INIS)

1992-12-01

This report was prepared by the Energy Information Administration to provide the Secretary of Energy with basic data and analyses for ninth annual determination of the viability of the domestic uranium mining and milling industry. A viability determination is required annually, for the years 1983 through 1992, by Section 170B of the Nuclear Regulatory Commission (NRC) Authorization Act of 1983, Public Law 97-415, which amend the Atomic Energy Act of 1954. Topics include: evolution of the U.S. uranium industry; nuclear power requirements and uranium industry projections; and attributes of industry viability

Oil Industry, Solar Energy Industry, and Mining Occupations. Curriculum for Petroleum, Mining and Solar Energy Secretaries. July 1, 1977-June 30, 1978.

Science.gov (United States)

Martinez, Gloria E.

This document is a packet of instructional materials for training secretaries and clerks for the petroleum, mining, and solar energy fields. Developed by Eastern New Mexico University and the New Mexico State Department of Vocational Education, and aimed at New Mexico industry, the curriculum is divided into three units of petroleum, mining, and…

New Forces at Work in Mining: Industry View of Critical Technologies

Energy Technology Data Exchange (ETDEWEB)

Peterson, D. J. [Science and Technology Policy Inst., Arlington, VA (United States); LaTourrette, Tom [Science and Technology Policy Inst., Arlington, VA (United States); Bartis, James T. [Science and Technology Policy Inst., Arlington, VA (United States)

2007-04-01

RAND has just published a report entitled, "New Forces at Work in Mining: Industry Views of Critical Technologies," by D. J. Peterson, Tom LaTourrette, and James T. Bartis. The report presents the results of a series of in-depth discussions with leading mining industry representatives selected for their prominent position and their ability to think broadly about technology trends. The discussions highlighted the importance of collaborative technology research, development, and implementation strategies and the increasingly critical role of mine personnel in the utilization of new technologies.

Proceedings of the 11. annual mining industry learning seminar : 2006 equipment evolutions

Energy Technology Data Exchange (ETDEWEB)

Joseph, T. [Alberta Univ., Edmonton, AB (Canada). School of Mining and Petroleum Engineering] (comp.)

2006-07-01

This seminar provided a forum for mine engineers, geologists, operators, vendors and academics to discuss various topics on equipment evolution that address mining industry concerns. Participants included those who are involved in mine planning, equipment selection, operations and maintenance. The presentations identified possible solutions to ongoing issues and alternative technologies emerging in the mining industry. Operators and original equipment manufacturers shared their innovations in novel developments and presented solutions to issues relevant to mining processes including truck and shovel technology issues such as tires, lube and fuel emissions. The seminar featured 17 presentations, of which 5 have been catalogued separately for inclusion in this database. tabs., figs.

Possibilities of professional career in the German coal mining industry

Energy Technology Data Exchange (ETDEWEB)

Gierhardt, H; Mader, S

1977-06-01

Development and age structure of the labor force. Possibilities and courses of professional training in the German coal mining industry. Choice of profession and possibilities of promotion. More advertising campaigns necessary to obtain recruits for mining work.

Environmental procedures for thermoelectric power plants by national mineral coal

International Nuclear Information System (INIS)

Serra, M.T.F.; Verney Gothe, C.A. de; Silva Ramos, R. da

1990-01-01

This paper presents the environmental impacts decursive of utilization of South-Brazilian mineral coal to generation of electric energy. This environmental impacts and alternatives of attenuating measures are presented and evaluated, containing the totality of productive cycle: mining, processing, transport, stock piling and use in thermoelectric power plants. Environmental procedures are systematized for first time, in order to be observed in whole expansion of coal thermoelectric generator park. The conception of power plants and site studies of their useful lives are also included. (C.M.). 19 figs, 24 tabs

Industrial Internet of Things: (IIoT) applications in underground coal mines.

Science.gov (United States)

Zhou, C; Damiano, N; Whisner, B; Reyes, M

2017-12-01

The Industrial Internet of Things (IIoT), a concept that combines sensor networks and control systems, has been employed in several industries to improve productivity and safety. U.S. National Institute for Occupational Safety and Health (NIOSH) researchers are investigating IIoT applications to identify the challenges of and potential solutions for transferring IIoT from other industries to the mining industry. Specifically, NIOSH has reviewed existing sensors and communications network systems used in U.S. underground coal mines to determine whether they are capable of supporting IIoT systems. The results show that about 40 percent of the installed post-accident communication systems as of 2014 require minimal or no modification to support IIoT applications. NIOSH researchers also developed an IIoT monitoring and control prototype system using low-cost microcontroller Wi-Fi boards to detect a door opening on a refuge alternative, activate fans located inside the Pittsburgh Experimental Mine and actuate an alarm beacon on the surface. The results of this feasibility study can be used to explore IIoT applications in underground coal mines based on existing communication and tracking infrastructure.

Public Consultation Processes in Greenland Regarding the Mining Industry

Directory of Open Access Journals (Sweden)

Maria Ackrén

2016-05-01

Full Text Available Since the Greenland Self-Government Act came into force in 2009, economic development and the right to utilize natural resources in Greenland lies in the hands of the Self-Government. Earlier efforts to establish this authority were made back in the 1970s, when discussions on Home Rule were first on the agenda. Mining industries are not a new activity in Greenland. During the Second World War, Greenlandic cryolite was used to produce aluminum for the North American aircraft industry. Other essential natural resources, such as gold and gemstones, have also received international interest over the years. Greenland's new development aim is to build up a large-scale mining industry. This article elucidates the form of public consultation processes followed in Greenland in connection with two large-scale mining projects and the different views various actors have regarding these events. How did the deliberative democratic process unfold in Greenland regarding these projects? Was the process followed an effective way to manage these kinds of projects? The article shows that two projects that received a lot of media attention: the 2005 iron ore mine project in Isukasia, and the 2001 TANBREEZ-project to extract rare earth elements, used highly different approaches when it comes to deliberative democracy. In the former case, a limited degree of deliberative democracy was used, while in the latter case, the opposite applies.

Water pollution: its management and control in the South African gold mining industry

International Nuclear Information System (INIS)

Pulles, W.

1992-01-01

The South African mining industry is subjected to pressure from the authorities, the media and the public regarding the impact of mining operations on the water environment. In order to respond to these developments the mining industry needs to have a good understanding of water quality management issues which apply to its operations. Important issues in this regard are discussed. 40 refs., 10 tabs., 2 figs

System dynamics model for environment - human systems interaction in the mining industry

International Nuclear Information System (INIS)

Pal, B.K.

1994-01-01

Use of advanced technology in the mining activities are polluting the natural environment, interfering with the normal life of the miners/residents. In this paper, health hazards due to underground workings and effect of environmental conditions on men are discussed. A composite system inter-relationship of the mining industries with the Government, society and environmental sectors is established. Allowing certain level of pollution, a system dynamics model is developed considering the parameters like more revenues from the mining industries, degradation of quality of life index - environmental index on long-term and short-term basis, new diseases due to pollution, social awareness, health care facilities, tax exemption etc. This model will help us to understand the optimisation of the parameters to establish the better interaction in the environment-human systems in the mining industries. 14 refs., 4 figs., 2 tabs

Designing high-Performance layered thermoelectric materials through orbital engineering

DEFF Research Database (Denmark)

Zhang, Jiawei; Song, Lirong; Madsen, Georg K. H.

2016-01-01

Thermoelectric technology, which possesses potential application in recycling industrial waste heat as energy, calls for novel high-performance materials. The systematic exploration of novel thermoelectric materials with excellent electronic transport properties is severely hindered by limited...... insight into the underlying bonding orbitals of atomic structures. Here we propose a simple yet successful strategy to discover and design high-performance layered thermoelectric materials through minimizing the crystal field splitting energy of orbitals to realize high orbital degeneracy. The approach...... naturally leads to design maps for optimizing the thermoelectric power factor through forming solid solutions and biaxial strain. Using this approach, we predict a series of potential thermoelectric candidates from layered CaAl2Si2-type Zintl compounds. Several of them contain nontoxic, low-cost and earth...

Assessing Water Risks in the Mining Industry using Life Cycle Assessment Based Approaches

OpenAIRE

STEPHEN ALAN NORTHEY

2018-01-01

Recent advances life cycle assessment methodology provide an opportunity to gain a more holistic understanding of how the mining industry interacts with water resources. A detailed review of assessment methodology and water management in the mining industry was undertaken to identify research needs. Global datasets of water use statistics for mining operations were also developed, and an exhaustive analysis of how global mineral resources and production are spatially distributed across local ...

Reliable Thermoelectric Module Design under Opposing Requirements from Structural and Thermoelectric Considerations

Science.gov (United States)

Karri, Naveen K.; Mo, Changki

2018-06-01

Structural reliability of thermoelectric generation (TEG) systems still remains an issue, especially for applications such as large-scale industrial or automobile exhaust heat recovery, in which TEG systems are subject to dynamic loads and thermal cycling. Traditional thermoelectric (TE) system design and optimization techniques, focused on performance alone, could result in designs that may fail during operation as the geometric requirements for optimal performance (especially the power) are often in conflict with the requirements for mechanical reliability. This study focused on reducing the thermomechanical stresses in a TEG system without compromising the optimized system performance. Finite element simulations were carried out to study the effect of TE element (leg) geometry such as leg length and cross-sectional shape under constrained material volume requirements. Results indicated that the element length has a major influence on the element stresses whereas regular cross-sectional shapes have minor influence. The impact of TE element stresses on the mechanical reliability is evaluated using brittle material failure theory based on Weibull analysis. An alternate couple configuration that relies on the industry practice of redundant element design is investigated. Results showed that the alternate configuration considerably reduced the TE element and metallization stresses, thereby enhancing the structural reliability, with little trade-off in the optimized performance. The proposed alternate configuration could serve as a potential design modification for improving the reliability of systems optimized for thermoelectric performance.

Nuclear regulation of South African mines: An industry perspective

International Nuclear Information System (INIS)

Wymer, D.G.

2001-01-01

South African mines have become subject to a rigid and prescriptive system of nuclear regulation that has its roots in the past when South Africa embarked upon a period of nuclear development spanning the full nuclear fuel cycle, and in which the South African gold mining industry once played a major part in the supply of uranium as a low grade by-product. Radiation hazards in the mines are generally very moderate, even in the few gold mines associated with uranium by-product, and to not warrant the type of regulatory attention normally applied to nuclear installations, or even to uranium mines. The continued imposition of strict nuclear regulatory requirements has caused severe financial hardship and threatens the survival of certain mining operations, while seemingly having little or no health benefits to workers or the public. With the development of modern, comprehensive mine health and safety legislation, a more appropriate, effective, and far less costly vehicle for controlling radiation hazards in mines now exists, utilizing the resources of the Mine Health and Safety Inspectorate. This approach is now being proposed, in the drafting of new legislation, as constituting a better alternative to the nuclear regulation of mines. (author)

Nucleonic gauges in the Australian mining and exploration industries

International Nuclear Information System (INIS)

Charbucinski, J.

2000-01-01

On-line and in-situ nucleonic analysis systems have found widespread application in the Australian metalliferous mineral and coal industries. The rapid and reliable response of these systems has led to improved exploration and better control of mining and mineral processing. This paper reviews both types of nucleonic control system (on-line and in-situ) available in Australian exploration and mining market. (author)

A new productivity index to measure economic sustainability of the mining industry

International Nuclear Information System (INIS)

Rodriguez, Xose A

2010-01-01

This document aims to introduce a total productivity index to measure the economic sustainability of the mining industry. This index will take into account any technical developments, means of use of productive factors (i.e. inefficiencies and scale effects) and the effects on the growth of the geological properties in the resources to be exploited (particularly the effects of resource reduction or reserves depletion). This new index will then be applied to the example of the Spanish mining industry, with some interesting findings regarding the configuration of sustainable mining policies.

Determination of possible radiation hazards associated with tin mining industry in West Malaysia

International Nuclear Information System (INIS)

Hu, S.J.

1979-04-01

A study was made in Malaysia under an IAEA research contract on the possible radiation hazards associated with tin mining industry in Malaysia. The study comprised of the measurement of external radiation levels in various mines, gamma-ray spectrometric analysis of various samples from mines, and measurements of radon and radon daughters concentrations. For radon daughters modified Tsivoglou and Kusnetz methods were used. The study showed that there is, in general, no radiation hazard associated with the tin mining industry in West Malaysia. However, the only likely source that might pose some external radiation hazard is the amang upgrading plant which invariably concentrates either or both 232 Th and 238 U in the final products of the upgrading process. A quantitative and thorough investigation of radiation levels in the amang upgrading industry is necessary to determine the degree of hazard. No significant radon or radon daughters concentrations were noted in the underground mines

Options report for the mining, non-ferrous metal smelting and refining industry

International Nuclear Information System (INIS)

1999-10-01

This plant level analysis involved the study of three Canadian mines from ore extraction to refining. Energy consumption and GHG emissions from each facility were examined, along with projects to reduce these emissions. Results showed variation in emissions between firms by orders of magnitude, and while GHG reducing projects do exist, many are not implemented for economic and business reasons. Nevertheless, a modelling analysis of the mining industry as a whole showed that the industry should be able to reduce its GH emissions to within range of the Kyoto target. Enhanced voluntary initiatives, already supported by the industry, are seen as the most cost effective means of achieving these emission reductions. Industry experts suggest more effort to be expended on identifying GHG reducing technologies and competing projects with higher returns on investment. There is incontrovertible evidence that energy efficiency measures are often not implemented by the industry because their return on investment are not as attractive as those associated with process improvement projects. With appropriate assistance from government, such as funding for comprehensive energy audits similar to the plant level analysis done for this report, funding for carrying out the detailed economic evaluation of these projects, help with specialized human resources to participate in enhanced voluntary activities (such as the energy audits and life cycle cost/benefit analysis), and financial incentives to create more attractive returns on investment for energy efficiency/GHG emission reduction projects, the Canadian mining industry will be, and can be, part of the solution towards reducing GHG emissions. Other avenues that could be helpful in this effort include exporting Canadian mining technology to aid in reaching a global solution to a global problem, recognition for the Canadian mining industry for its northern operations, credit for Canada for embodied energy in exports, and recycling to

The future of European mining: What should our mining industry learn from the Skouries and Rosia Montana community gold conflicts

Science.gov (United States)

Hardy, Liam; Heller, Shaun; Faltyn, Rowan; Stefanaki, Anna; Economidou, Romina; Savin, Irina; Hood, Leo; Conway, Christopher

2017-04-01

The popular image of mining portrayed by media and by a majority of public opinion is a dominantly negative one. From worker's rights to environmental damages, disasters such as the Copiapó mine collapse (Chile), the acid mine drainage at Lousal (Portugal) and the Pb contamination of waters around the Tyndrum mines (Scotland) overshadow initiatives like the ICMM. Some companies receive little praise despite creating active community education and investment projects, while others simply build higher barbed wire fences and attempt to weather the protests, budgeting them into mine life assessments. This image problem, combined with the decentralised political segregation of Europe and the increased power of grass-roots protest initiatives (such as Antigold in Greece), has resulted in mining companies joining a long list of industries effected by the 'auto-protest' reaction in face of development, regardless of potential regional and national benefits, there is a pre-existing lack of trust in corporate and government powers to protect community interests. The poor management of existing licences is thus becoming a significant danger to future operations and the wider industry. Here we report on the Rosia Montana dispute (Romania) and the ongoing Skouries conflict (Greece). We then discuss how the European mining industry may need to significantly adapt its exploration and community engagement strategies to avoid future conflicts and, present a recent example of how effective suitably organised community engagement projects can be for local mining initiatives from Southern Portugal.

Responding to non-technical challenges in the uranium mining industry

International Nuclear Information System (INIS)

Shpyth, A.

1997-01-01

The modern uranium mining industry in Saskatchewan has been working with northerners, governments, and educational institutions for nearly 20 years to bring about one of the highest levels of northern and aboriginal participation in an industrial sector in Canada. It has accomplished this in the face of challenges - those arising from the demographics of the north, continuously rising expectations, and the at times difficult demands from evolving aboriginal political institutions. Every second apprenticeship vacancy at Key Lake is to be awarded to an employee of aboriginal ancestry. Saskatchewan dominates uranium mining because of the high grade of its deposits. Even though Key Lake, Rabbit Lake and Cluff Lake are coming near the end of their lives, they will be replaced by: McArthur River (with average grade 15% U 3 O 8 ), Cigar Lake (9%), McClean Lake (3.5), Midwest (4.5). Without doubt, the grade and size of these new deposits will contribute to the competitiveness of the Saskatchewan uranium mining industry; but so too will the workforce

Cooperation with Emerging Countries in Advanced Mining Training Programmes Involving an Industrial Partner

Energy Technology Data Exchange (ETDEWEB)

Ahmadzadeh, H., E-mail: Hossein.Ahmadzadeh@ema.fr [CESMAT, CESSEM, Alès (France); Petitclerc, J-L. [AREVA NC, Paris (France)

2014-05-15

After about 20 years at a low level of activity the global uranium mining industry has been enjoying a significant expansion since about 2003. However, it is apparent that the “quiet” period has led to a shortage of new staff coming into the industry, many middle ranking and skilled professionals have moved to other industries and many of the remaining staff is fast approaching retirement. Many organizations are looking at ways to address this situation as quickly and effectively as possible, including governments, industry and the IAEA. This paper describes one training programme that has been developed, and is currently being implemented, as a joint venture between the uranium mining company AREVA NC and the Centre for Advanced Studies of Mineral Resources, which is located at the School of Mines in Ales, France. (author)

R&D status and the performance of domestic firms in China's coal mining industry

International Nuclear Information System (INIS)

Sun, Sizhong; Anwar, Sajid

2015-01-01

Coal use accounts for a very large proportion of electricity production in China. Using a recently developed coarsened exact matching (CEM) technique, this paper examines the impact of research and development (R&D) activities on the performance of firms in China's coal mining industry. Our empirical results reveal that firms in China's coal industry that conduct R&D are more productive and their sales are higher. However, as far as the firm profitability and market shares are concerned, whether or not a firm in China's coal industry conducts R&D makes no difference. We find that foreign direct investment in China's coal mining industry leads to a significant decrease in the market share of domestic firms and its impact on productivity, sales and profitability of domestic firms is insignificant. The empirical results presented in this paper suggest that policies that encourage domestic firms in China's coal mining industries to conduct R&D can increase domestic production thereby reducing reliance on imports. Furthermore, productivity gains arising from R&D activities can also help Chinese mining firms to improve their competitive position in the international market. However, there is a need for restricting foreign direct investment in China's coal mining industry. - Highlights: • R&D status affects firm performance in China's coal mining industry. • Coal mining firms that conduct R&D are, on average, 0.2717% more productive. • Coal mining firms that conduct R&D experience an increase in sales. • Increase in foreign investment decreases the market share of coal mining firms

US uranium mining industry: background information on economics and emissions

Energy Technology Data Exchange (ETDEWEB)

Bruno, G.A.; Dirks, J.A.; Jackson, P.O.; Young, J.K.

1984-03-01

A review of the US uranium mining industry has revealed a generally depressed industry situation. The 1982 U/sub 3/O/sub 8/ production from both open-pit and underground mines declined to 3800 and 6300 tons respectively with the underground portion representing 46% of total production. US exploration and development has continued downward in 1982. Employment in the mining and milling sectors has dropped 31% and 17% respectively in 1982. Representative forecasts were developed for reactor fuel demand and U/sub 3/O/sub 8/ production for the years 1983 and 1990. Reactor fuel demand is estimated to increase from 15,900 tons to 21,300 tons U/sub 3/O/sub 8/ respectively. U/sub 3/O/sub 8/ production, however, is estimated to decrease from 10,600 tons to 9600 tons respectively. A field examination was conducted of 29 selected underground uranium mines that represent 84% of the 1982 underground production. Data was gathered regarding population, land ownership and private property valuation. An analysis of the increased cost to production resulting from the installation of 20-meter high exhaust borehole vent stacks was conducted. An assessment was made of the current and future /sup 222/Rn emission levels for a group of 27 uranium mines. It is shown that /sup 222/Rn emission rates are increasing from 10 individual operating mines through 1990 by 1.2 to 3.8 times. But for the group of 27 mines as a whole, a reduction of total /sup 222/Rn emissions is predicted due to 17 of the mines being shutdown and sealed. The estimated total /sup 222/Rn emission rate for this group of mines will be 105 Ci/yr by year end 1983 or 70% of the 1978-79 measured rate and 124 Ci/yr by year end 1990 or 83% of the 1978-79 measured rate.

US uranium mining industry: background information on economics and emissions

International Nuclear Information System (INIS)

Bruno, G.A.; Dirks, J.A.; Jackson, P.O.; Young, J.K.

1984-03-01

A review of the US uranium mining industry has revealed a generally depressed industry situation. The 1982 U 3 O 8 production from both open-pit and underground mines declined to 3800 and 6300 tons respectively with the underground portion representing 46% of total production. US exploration and development has continued downward in 1982. Employment in the mining and milling sectors has dropped 31% and 17% respectively in 1982. Representative forecasts were developed for reactor fuel demand and U 3 O 8 production for the years 1983 and 1990. Reactor fuel demand is estimated to increase from 15,900 tons to 21,300 tons U 3 O 8 respectively. U 3 O 8 production, however, is estimated to decrease from 10,600 tons to 9600 tons respectively. A field examination was conducted of 29 selected underground uranium mines that represent 84% of the 1982 underground production. Data was gathered regarding population, land ownership and private property valuation. An analysis of the increased cost to production resulting from the installation of 20-meter high exhaust borehole vent stacks was conducted. An assessment was made of the current and future 222 Rn emission levels for a group of 27 uranium mines. It is shown that 222 Rn emission rates are increasing from 10 individual operating mines through 1990 by 1.2 to 3.8 times. But for the group of 27 mines as a whole, a reduction of total 222 Rn emissions is predicted due to 17 of the mines being shutdown and sealed. The estimated total 222 Rn emission rate for this group of mines will be 105 Ci/yr by year end 1983 or 70% of the 1978-79 measured rate and 124 Ci/yr by year end 1990 or 83% of the 1978-79 measured rate

ASEAN mining industry`s development

Energy Technology Data Exchange (ETDEWEB)

Simatupang, M [ASEAN Federation of Mining Associations (AFMA), Jakarta (Indonesia)

1994-12-31

A report is presented on the potential and challenges of mining in the ASEAN region. Legal and financial provision, the and business climate for future investment is also discussed. One problem is the small scale of many of the mining operations, so special guidance is needed, especially in environmental matters. Specific discussion is presented of mining in Indonesia, Malaysia, Thailand, the Philippines, Brunei, and Vietnam and Myanmar. 8 refs., 3 figs.

The role of waste sorting in the South African gold-mining industry

International Nuclear Information System (INIS)

Freer, J.S.; Boehme, R.C.

1985-01-01

The absolute potential for sorting waste from run-of-mine Witwatersrand gold ores normally lies between 60 and 90 per cent by mass. At present, the practical potential lies between 40 and 50 per cent. Yet few mines achieve a waste rejection of even 30 per cent. The average waste rejection for industry, including underground sorting, fell from 19,6 per cent in 1959 to 10,1 per cent in 1983, as industry moved from labour-intensive, multistage comminution, incorporating washing, screening, and sorting, to single-stage run-of-mine milling. Most of the sorting is still being done by hand; yet photometric and radiometric sorting machines of high capacity are available. More recently, a sorter based on neutron activation and the subsequent isomeric radioactive decay of gold itself was designed. This paper examines the case for an increased role for sorting in the South African gold-mining industry brought about by the increasing cost of power for milling and the possibility of extracting gold from low-grade reject fractions by heap leaching

Heavy Metal Contamination Assessment and Partition for Industrial and Mining Gathering Areas

Directory of Open Access Journals (Sweden)

Yang Guan

2014-07-01

Full Text Available Industrial and mining activities have been recognized as the major sources of soil heavy metal contamination. This study introduced an improved Nemerow index method based on the Nemerow and geo-accumulation index. Taking a typical industrial and mining gathering area in Tianjin (China as example, this study then analyzed the contamination sources as well as the ecological and integrated risks. The spatial distribution of the contamination level and ecological risk were determined using Geographic Information Systems. The results are as follows: (1 Zinc showed the highest contaminant level in the study area; the contamination levels of the other seven heavy metals assessed were relatively lower. (2 The combustion of fossil fuels and emissions from industrial and mining activities were the main sources of contamination in the study area. (3 The overall contamination level of heavy metals in the study area ranged from heavily contaminated to extremely contaminated and showed an uneven distribution. (4 The potential ecological risk showed an uneven distribution, and the overall ecological risk level ranged from low to moderate. This study also emphasized the importance of partition in industrial and mining areas, the extensive application of spatial analysis methods, and the consideration of human health risks in future studies.

Heavy Metal Contamination Assessment and Partition for Industrial and Mining Gathering Areas

Science.gov (United States)

Guan, Yang; Shao, Chaofeng; Ju, Meiting

2014-01-01

Industrial and mining activities have been recognized as the major sources of soil heavy metal contamination. This study introduced an improved Nemerow index method based on the Nemerow and geo-accumulation index. Taking a typical industrial and mining gathering area in Tianjin (China) as example, this study then analyzed the contamination sources as well as the ecological and integrated risks. The spatial distribution of the contamination level and ecological risk were determined using Geographic Information Systems. The results are as follows: (1) Zinc showed the highest contaminant level in the study area; the contamination levels of the other seven heavy metals assessed were relatively lower. (2) The combustion of fossil fuels and emissions from industrial and mining activities were the main sources of contamination in the study area. (3) The overall contamination level of heavy metals in the study area ranged from heavily contaminated to extremely contaminated and showed an uneven distribution. (4) The potential ecological risk showed an uneven distribution, and the overall ecological risk level ranged from low to moderate. This study also emphasized the importance of partition in industrial and mining areas, the extensive application of spatial analysis methods, and the consideration of human health risks in future studies. PMID:25032743

Hearing conservation in the South African mining industry [Notes

CSIR Research Space (South Africa)

Edwards, A

2010-09-01

Full Text Available This paper deals with noise-induced hearing loss protection in the South African mining industry. I deals with several issues, including standards and regulations, medical issues and compensation...

Thermoelectric materials - Compromising between high efficiency and materials abundance

Energy Technology Data Exchange (ETDEWEB)

Homm, G.; Klar, P.J. [I. Physikalisches Institut, Justus-Liebig-Universitaet, Heinrich-Buff-Ring 16, 35392 Giessen (Germany)

2011-09-15

In the context of CO{sub 2} neutral and regenerative energy production, the field of thermoelectrics has shifted more and more into the focus of scientific research in the last few years. Particularly a lot of research projects were started in the field of energy autarkic sensor technology and the so called energy harvesting, i.e. the recycling of otherwise lost energy. A potentially huge industrial branch for thermoelectric applications is the automotive industry with a main emphasis on generating electricity out of the waste heat of combustion engines with the help of thermoelectric generators or using Peltier cooling to replace conventional air conditioning in the passenger compartment. In addition, many niche applications are possible, e.g. as sensors for measuring the air pressure of tires etc. The applications of thermoelectric devices are very versatile. We analyse the potential of the state-of-the-art thermoelectric materials SiGe, PbTe, Bi{sub 2}Te{sub 3}, FeSi{sub 2} and potentially ZnO with respect to employment in four types of applications, classified by mobile vs stationary and specialized vs. mass application. The selection criteria comprise efficiency, materials availability, costs, environmental friendliness and toxicity. Based on these criteria, a decision matrix for choosing the appropriate material system for a specific application is defined. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Physiological strain in the Hungarian mining industry: The impact of physical and psychological factors

OpenAIRE

József Varga; Imre Nagy; László Szirtes; János Pórszász

2016-01-01

Objectives: The objectives of these investigations completed on workplaces in the Hungarian mining industry were to characterize the physiological strain of workers by means of work pulse and to examine the effects of work-related psychological factors. Material and Methods: Continuous heart rate (HR) recording was completed on 71 miners over a total of 794 shifts between 1987 and 1992 in mining plants of the Hungarian mining industry using a 6-channel recorder – Bioport (ZAK, Germany). The w...

On the Phase Separation in n-Type Thermoelectric Half-Heusler Materials

Directory of Open Access Journals (Sweden)

Michael Schwall

2018-04-01

Full Text Available Half-Heusler compounds have been in focus as potential materials for thermoelectric energy conversion in the mid-temperature range, e.g., as in automotive or industrial waste heat recovery, for more than ten years now. Because of their mechanical and thermal stability, these compounds are advantageous for common thermoelectric materials such as Bi 2 Te 3 , SiGe, clathrates or filled skutterudites. A further advantage lies in the tunability of Heusler compounds, allowing one to avoid expensive and toxic elements. Half-Heusler compounds usually exhibit a high electrical conductivity σ , resulting in high power factors. The main drawback of half-Heusler compounds is their high lattice thermal conductivity. Here, we present a detailed study of the phase separation in an n-type Heusler materials system, showing that the Ti x Zr y Hf z NiSn system is not a solid solution. We also show that this phase separation is key to the thermoelectric high efficiency of n-type Heusler materials. These results strongly underline the importance of phase separation as a powerful tool for designing highly efficient materials for thermoelectric applications that fulfill the industrial demands of a thermoelectric converter.

The thermoelectric generators use for waste heat utilization from cement plant

Directory of Open Access Journals (Sweden)

Sztekler Karol

2017-01-01

Production often entails the formation of by-product which is waste heat. One of the equipment processing heat into electricity is a thermoelectric generator. Its operation is based on the principle of thermoelectric phenomenon, which is known as a Seebeck phenomenon. The simplicity of thermoelectric phenomena allows its use in various industries, in which the main waste product is in the form of heat with the temperature of several hundred degrees. The study analyses the possibility of the thermoelectric systems use for the waste heat utilization resulting in the cement production at the cement plant. The location and design of the thermoelectric system that could be implemented in cement plant is chosen. The analysis has been prepared in the IPSEpro software.

What role can ISO 17025 play in the South African mining industry? ; Article

CSIR Research Space (South Africa)

Pretorius, CJ

2013-03-01

Full Text Available -1 Journal of the Mine Ventilation Society of South Africa March 2013/ Vol 66(1), pp 15-17 What role can ISO 17025 play in the South African mining industry? Pretorius CJ1 and Chesalokile T2 1CSIR. Centre for Mining Innovation 2South African...

Applications of radio frequency identification systems in the mining industry

Energy Technology Data Exchange (ETDEWEB)

Hind, D [Davis Derby Limited (United Kingdom)

1994-12-31

The paper describes the application of Radio Frequency Identification (RFID) systems in the mining industry for both surface and underground mines. The history of the RFID system, types available, the transponder, and the various techniques used are described and compared. The design and certification of a system for use in a hazardous area are described, noting the hazard of inadvertent detonator ignition. 2 refs.

Literature review of labour turnover and absenteeism costs in the coal mining industry

Energy Technology Data Exchange (ETDEWEB)

Woolf, A.

1977-01-01

This paper includes labor turnover formulae, turnover costs, and turnover rates for the mining industry. Few meaningful studies or reports on absenteeism costs and labour turnover in mining were retrieved.

Leader empowering behaviour, organisational commitment and turnover intention within the gold mining industry / Zelna Maré

OpenAIRE

Maré, Zelna

2007-01-01

The mining industry has been under enormous pressure in the past few years. particularly with issues around production and costs. As far as human capital is concerned. the gold industry has seen a high degree of shrinkage in personnel. In order to be able to cope with the continuous challenges faced by the mining industry, mining organisations need leaders of the highest standards. Due to the challenge of increasing productivity levels, empowerment is required within the gold ...

Legacies of the uranium ore mining industry and their restoration. A survey of Africa, Asia and Australia

International Nuclear Information System (INIS)

Waggitt, P.

2008-01-01

Management of the environment in the uranium mining industry has an eventful history of more than 50 years. In addition to examples of successful restoration of mining and preparation sites in some countries there are also numerous cases, in which no or defective restoration left behind serious waste deposits. In the course of the renaissance of the uranium industry there is increasing interest in the rehabilitation of such waste sites. There is still an urgent requirement to eradicate the environmental effects of the old mining industry. Previous deposits could be of interest for renewed working under the present economic boundary conditions. Restoration as an integral part of the current and future uranium mining industry with the application of modern international safety standards is extremely important. The contribution provides a survey of restoration projects of the old mining industry in various parts of the world and shows how the International Atomic Energy Agency, the national supervisory and approval authorities as well as the mining companies collaborate closely at many sites on solution of the difficult problems. (orig.)

Mg2BIV: Narrow Bandgap Thermoelectric Semiconductors

Science.gov (United States)

Kim, Il-Ho

2018-05-01

Thermoelectric materials can convert thermal energy directly into electric energy and vice versa. The electricity generation from waste heat via thermoelectric devices can be considered as a new energy source. For instance, automotive exhaust gas and all industrial processes generate an enormous amount of waste heat that can be converted to electricity by using thermoelectric devices. Magnesium compound Mg2BIV (BIV = Si, Ge or Sn) has a favorable combination of physical and chemical properties and can be a good base for the development of new efficient thermoelectrics. Because they possess similar properties to those of group BIV elemental semiconductors, they have been recognized as good candidates for thermoelectric applications. Mg2Si, Mg2Ge and Mg2Sn with an antifluorite structure are narrow bandgap semiconductors with indirect band gaps of 0.77 eV, 0.74 eV, and 0.35 eV, respectively. Mg2BIV has been recognized as a promising material for thermoelectric energy conversion at temperatures ranging from 500 K to 800 K. Compared to other thermoelectric materials operating in the similar temperature range, such as PbTe and filled skutterudites, the important aspects of Mg2BIV are non-toxic and earth-abundant elements. Based on classical thermoelectric theory, the material factor β ( m* / m e)3/2μκ L -1 can be utilized as the criterion for thermoelectric material selection, where m* is the density-of-states effective mass, me is the mass of an electron, μ is the carrier mobility, and κL is the lattice thermal conductivity. The β for magnesium silicides is 14, which is very high compared to 0.8 for iron silicides, 1.4 for manganese silicides, and 2.6 for silicon-germanium alloys. In this paper, basic phenomena of thermoelectricity and transport parameters for thermoelectric materials were briefly introduced, and thermoelectric properties of Mg2BIV synthesized by using a solid-state reaction were reviewed. In addition, various Mg2BIV compounds were discussed

Barriers to green supply chain management in Indian mining industries

DEFF Research Database (Denmark)

Muduli, K.; Govindan, Kannan; Barve, A.

2013-01-01

industries are increasingly implementing environmental management systems (EMS), cleaner production (CP), and adopting green supply chain management (GSCM) practices. GSCM focuses on a reduction of the adverse impacts of supply chain activities as well as a minimization of energy and material usage......A country's mining industry, despite its significant contributions to the country's economic growth, generally has a very poor public image because it is considered as a major environmental polluter. To acquire an improved social image, as well as to comply with government regulations, mining...... strength of the barriers will help decision makers rank them and decide a course of action that will make an optimum utilization of available resources during times of resource scarcity....

Interventions of state in favour of mining industry in EU countries

Energy Technology Data Exchange (ETDEWEB)

Jaroslav Dvoracek; Vladimir Slivka [VSB-Technical University of Ostrava (Czech Republic)

2008-03-15

This contribution is based on a study dealing with the limitation or withdrawal of ownership rights to real estates in favour of the mining industry. All EU countries are included as of the year 2006. The interventions of the state concern ensuring entry to other people's lands to carry out exploration activities and restraining the proprietary rights of landowners in favour of mining, including expropriation. The countries where mining legislation does not cover state interventions are also presented.

Developments in the application of underground battery vehicles in the UK coal mining industry

Energy Technology Data Exchange (ETDEWEB)

Fortune, J A.B.; Crawshaw, S A.M. [Long-Airdox International Ltd. (United Kingdom)

1996-10-01

Trackless battery powered haulage vehicles have been in operation in British coal mines principally for longwall face transfer and personnel transportation. Changes within the industry have resulted in the introduction of room and pillar coal mining methods and the introduction of increasingly heavier longwall roof supports. This has resulted in the introduction of: battery powered coal haulage machines, which, without the need for trailing cables, increase productivity within room and pillar mining; and battery powered longwall shield haulers which are capable of carrying the heaviest shield supports currently being utilised within the British coal mining industry. The conventional machines have been adapted from an American design to meet the requirements of European legislation. This has seen the emphasis being placed upon the supplier with the European Machinery Directive being introduced, necessitating the assigning of a `CE` mark to each vehicle. Battery vehicle technology has advanced to meet the demands of the ever changing market and will no doubt be further adapted to meet the requirement of the British coal mining industry. 1 ref., 12 figs., 3 tabs.

The South Manchurian Railway Company and the Mining Industry: The Case of the Fushun Coal Mine

Directory of Open Access Journals (Sweden)

Tsu-yu Chen

2015-09-01

Full Text Available Following the Japanese victory over Czarist Russia in the Russo-Japanese War and the signing of the Treaty of Portsmouth in 1905, the southernmost section of the southern branch of the China Far East Railway (Changchun–Port Arthur was transferred to Japanese control. A new, semi-privately held company, the South Manchuria Railway Company (SMR, Mantetsu, was established with 85.6 percent capitalization by the Japanese government and foreign bonds to operate the railroad and to develop settlements (including highways, public health facilities, educational institutions, and industries (coal mines, harbor facilities, electrical power plants, shale oil plants, chemical plants, and restaurants along its route. SMR nonetheless emphasized railway and mining investment. The centerpiece of its mining interests was the Fushun Coal Mine. Starting in 1917, SMR began to prosper, with most profits coming from its coal mines, and it soon spun off subsidiary companies. In this sense, although the factors that influenced development of the Fushun Coal Mine in each period were different, this development still shows continuity of the business management.

Aggregate and Mineral Resources - MO 2014 Industrial Mineral Mines (SHP)

Data.gov (United States)

NSGIC State | GIS Inventory — This data set contains names, locations and additional data for active Industrial Mineral Mines permitted with the Missouri Department of Natural Resources, Division...

Nanostructured Thermoelectric Oxides for Energy Harvesting Applications

KAUST Repository

Abutaha, Anas I.

2015-11-24

As the world strives to adapt to the increasing demand for electrical power, sustainable energy sources are attracting significant interest. Around 60% of energy utilized in the world is wasted as heat. Different industrial processes, home heating, and exhausts in cars, all generate a huge amount of unused waste heat. With such a huge potential, there is also significant interest in discovering inexpensive technologies for power generation from waste heat. As a result, thermoelectric materials have become important for many renewable energy research programs. While significant advancements have been done in improving the thermoelectric properties of the conventional heavy-element based materials (such as Bi2Te3 and PbTe), high-temperature applications of thermoelectrics are still limited to one materials system, namely SiGe, since the traditional thermoelectric materials degrade and oxidize at high temperature. Therefore, oxide thermoelectrics emerge as a promising class of materials since they can operate athigher temperatures and in harsher environments compared to non-oxide thermoelectrics. Furthermore, oxides are abundant and friendly to the environment. Among oxides, crystalline SrTiO3 and ZnO are promising thermoelectric materials. The main objective of this work is therefore to pursue focused investigations of SrTiO3 and ZnO thin films and superlattices grown by pulsed laser deposition (PLD), with the goal of optimizing their thermoelectric properties by following different strategies. First, the effect of laser fluence on the thermoelectric properties of La doped epitaxial SrTiO3 films is discussed. Films grown at higher laser fluences exhibit better thermoelectric performance. Second, the role of crystal orientation in determining the thermoelectric properties of epitaxial Al doped ZnO (AZO) films is explained. Vertically aligned (c-axis) AZO films have superior thermoelectric properties compared to other films with different crystal orientations. Third

Proceedings of the 1. international workshop on energy management in the mining industry 2010: Enermin

International Nuclear Information System (INIS)

2010-01-01

The first international workshop on energy management in the mining industry, ENERMIN 2010, was held in Santiago, Chile, from November 14th to November 16th, 2010. The purpose of this conference, organized by Gecamin, was to gather experts from the mining industry to analyse some of the principal aspects of reliable, sustainable and low-cost energy supply and the efficient use of energy in mining and metallurgical processes. The conference was attended by over 160 professionals and experts from 11 different countries and participants had the opportunity to hear about some of the latest technologies and to discuss different issues relating to efficient energy use in the mining industry with other experts. 25 out of the 31 papers presented during this conference have been catalogued separately for inclusion in this database

Economic statistics for the mining and metallurgical industries - 1978 and 1979

Energy Technology Data Exchange (ETDEWEB)

Medaets, J.

1982-04-01

The statistics are compiled in 5 sections : 1) The mining industries (coal, metallurgy, quarries and associated industries); 2) The manufacture of coke and briquettes; 3) Iron and steel; 4) Hydrology; and 5) The extraction of sand on Belgium's 'continental shelf'.

Environmental impact assessment of european non-ferro mining industries through life-cycle assessment

Science.gov (United States)

Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

2018-05-01

European mining industries are the vast industrial sector which contributes largely on their economy which constitutes of ferro and non-ferro metals and minerals industries. The non-ferro metals extraction and processing industries require focus of attention due to sustainability concerns as their manufacturing processes are highly energy intensive and impacts globally on environment. This paper analyses major environmental effects caused by European metal industries based on the life-cycle impact analysis technologies. This research work is the first work in considering the comparative environmental impact analysis of European non-ferro metal industries which will reveal their technological similarities and dissimilarities to assess their environmental loads. The life-cycle inventory datasets are collected from the EcoInvent database while the analysis is done using the CML baseline and ReCipe endpoint method using SimaPro software version 8.4. The CML and ReCipe method are chosen because they are specialized impact assessment methods for European continent. The impact categories outlined for discussion here are human health, global warming and ecotoxicity. The analysis results reveal that the gold industry is vulnerable for the environment due to waste emission and similar result retained by silver mines a little bit. But copper, lead, manganese and zinc mining processes and industries are environment friendly in terms of metal extraction technologies and waste emissions.

A Review on the Fabrication of Polymer-Based Thermoelectric Materials and Fabrication Methods

Science.gov (United States)

Kamarudin, Muhammad Akmal; Sahamir, Shahrir Razey; Datta, Robi Shankar; Long, Bui Duc; Mohd Sabri, Mohd Faizul; Mohd Said, Suhana

2013-01-01

Thermoelectricity, by converting heat energy directly into useable electricity, offers a promising technology to convert heat from solar energy and to recover waste heat from industrial sectors and automobile exhausts. In recent years, most of the efforts have been done on improving the thermoelectric efficiency using different approaches, that is, nanostructuring, doping, molecular rattling, and nanocomposite formation. The applications of thermoelectric polymers at low temperatures, especially conducting polymers, have shown various advantages such as easy and low cost of fabrication, light weight, and flexibility. In this review, we will focus on exploring new types of polymers and the effects of different structures, concentrations, and molecular weight on thermoelectric properties. Various strategies to improve the performance of thermoelectric materials will be discussed. In addition, a discussion on the fabrication of thermoelectric devices, especially suited to polymers, will also be given. Finally, we provide the challenge and the future of thermoelectric polymers, especially thermoelectric hybrid model. PMID:24324378

Ensuring the Environmental and Industrial Safety in Solid Mineral Deposit Surface Mining

Science.gov (United States)

Trubetskoy, Kliment; Rylnikova, Marina; Esina, Ekaterina

2017-11-01

The growing environmental pressure of mineral deposit surface mining and severization of industrial safety requirements dictate the necessity of refining the regulatory framework governing safe and efficient development of underground resources. The applicable regulatory documentation governing the procedure of ore open-pit wall and bench stability design for the stage of pit reaching its final boundary was issued several decades ago. Over recent decades, mining and geomechanical conditions have changed significantly in surface mining operations, numerous new software packages and computer developments have appeared, opportunities of experimental methods of source data collection and processing, grounding of the permissible parameters of open pit walls have changed dramatically, and, thus, methods of risk assessment have been perfected [10-13]. IPKON RAS, with the support of the Federal Service for Environmental Supervision, assumed the role of the initiator of the project for the development of Federal norms and regulations of industrial safety "Rules for ensuring the stability of walls and benches of open pits, open-cast mines and spoil banks", which contribute to the improvement of economic efficiency and safety of mineral deposit surface mining and enhancement of the competitiveness of Russian mines at the international level that is very important in the current situation.

Environmental Impact Report for thermoelectric from coal in Candiota region - Brazil

International Nuclear Information System (INIS)

Rossato, A.C.; Camison, F.L.; Ladniuk, S.T.

1989-01-01

The principles for executing the Environmental Impact Studies and the elaboration of Environmental Impact Report, referring to the first module of Candiota III Thermoelectric Plant, near to the Electric Energy State Company are described, with some aspects about the mine, plant, region, executor corporations and comprehend area for the environmental impact studies. (C.G.C.)

Observations on strategic planning of information technology in the Indian coal mining industry

Energy Technology Data Exchange (ETDEWEB)

Owen, D.

1988-05-01

A view of the needs and plans to improve the coal mining industry of India is presented, focusing primarily on telecommunications and computerization. Further, details on mining electronics and vendor relationships with foreign firms are also discussed. 4 refs.

Mechatronics in the mining industrie. With (development) method towards success; Mechatronik im Bergbau. Mit (Entwicklungs-) Methode zum Erfolg

Energy Technology Data Exchange (ETDEWEB)

Brandt, Thorsten; Bruckmann, Tobias [Mercatronics GmbH, Duisburg (Germany)

2009-10-01

Germany is a high-wage country. Hence the internationally competitive extraction of raw materials in Germany can only be ensured by highly efficient working processes. Tackling the associated extreme requirements on road-driving, coal winning and transport equipment has resulted in the German mining industry and its suppliers achieving the role of an international leader in technology. To safeguard this position also in the future the successful mechanisation will now be followed by the mechatronisation in the mining industry. Efficiency will be increased by (partial) automation and assistance systems. This contribution is a first step towards a series of articles, which explain the principles of mechatronic development methods in the mining industry and will make the development engineers in the mines aware of the high potential of mechatronics in the mining industry. (orig.)

Intelligent Mining Engineering Systems in the Structure of Industry 4.0

Directory of Open Access Journals (Sweden)

Rylnikova Marina

2017-01-01

Full Text Available The solution of the problem of improving the human environment and working conditions at mines is based on the provision of the rationale of parameters and conditions for the implementation of an environmentally balanced cycle of comprehensive development of mineral deposits on the basis of the design of mining engineering systems characterized by the minimization of the human factor effect in danger zones of mining operations. In this area, robotized technologies are being developed, machinery and mechanisms with the elements of artificial intelligence, and mining and transport system automatic controls are being put into service throughout the world. In the upcoming decades, mining machines and mechanisms will be virtually industrial robots. The article presents the results of zoning of open-pit and underground mine production areas, as well as mining engineering system of combined development depending on the fact and periodicity of human presence in zones of mining processes. As a surface geotechnology case study, the software structure based on a modular concept is described. The performance philosophy of mining and transport equipment with the elements of artificial intelligence is shown when it is put into service in an open pit.

Intelligent Mining Engineering Systems in the Structure of Industry 4.0

Science.gov (United States)

Rylnikova, Marina; Radchenko, Dmitriy; Klebanov, Dmitriy

2017-11-01

The solution of the problem of improving the human environment and working conditions at mines is based on the provision of the rationale of parameters and conditions for the implementation of an environmentally balanced cycle of comprehensive development of mineral deposits on the basis of the design of mining engineering systems characterized by the minimization of the human factor effect in danger zones of mining operations. In this area, robotized technologies are being developed, machinery and mechanisms with the elements of artificial intelligence, and mining and transport system automatic controls are being put into service throughout the world. In the upcoming decades, mining machines and mechanisms will be virtually industrial robots. The article presents the results of zoning of open-pit and underground mine production areas, as well as mining engineering system of combined development depending on the fact and periodicity of human presence in zones of mining processes. As a surface geotechnology case study, the software structure based on a modular concept is described. The performance philosophy of mining and transport equipment with the elements of artificial intelligence is shown when it is put into service in an open pit.

Job demands, job resources, burnout and engagement of employees in the mining industry in South Africa / Marthie van der Walt

OpenAIRE

Van der Walt, Martha Johanna Rieker

2008-01-01

The mining industry has been the bedrock of South African economy for more than a century, making an important contribution to employment opportunities, the gross domestic product and export earnings in the South African economy. Globally the mining industry is faced with a shortage of qualified talent to meet its production needs. Every year there are more people leaving than entering the mining industry to pursue job and career opportunities. The mining industry has to focus a lot on safety...

Green thermoelectrics: Observation and analysis of plant thermoelectric response

Directory of Open Access Journals (Sweden)

Goupil Christophe

2016-01-01

Full Text Available Plants are sensitive to thermal and electrical effects; yet the coupling of both, known as thermoelectricity, and its quantitative measurement in vegetal systems never were reported. We recorded the thermoelectric response of bean sprouts under various thermal conditions and stress. The obtained experimental data unambiguously demonstrate that a temperature difference between the roots and the leaves of a bean sprout induces a thermoelectric voltage between these two points. Basing our analysis of the data on the force-flux formalism of linear response theory, we found that the strength of the vegetal equivalent to the thermoelectric coupling is one order of magnitude larger than that in the best thermoelectric materials. Experimental data also show the importance of the thermal stress variation rate in the plant’s electrophysiological response. therefore, thermoelectric effects are sufficiently important to partake in the complex and intertwined processes of energy and matter transport within plants.

The crisis in the uranium mining industry

International Nuclear Information System (INIS)

Ballery, J.L.

1993-01-01

For over ten years, the uranium mining industry within the OECD and elsewhere has been undergoing its worst ever crisis. At a time when it seemed assured of a promising future, the economic recession of the 1980s took the wind out of its sails. This paper describes the factors causing the crisis, strikes the balance of production, demand and stocks and gives forecasts for the next years. 3 figs., 9 refs

Domestic uranium mining and milling industry: 1986 viability assessment

International Nuclear Information System (INIS)

1987-01-01

This report presents the fourth annual assessment of the domestic uranium mining and milling industry's resource capability, supply response capability, financial capability, and import commitment dependency. The data and analysis in support of this assessment and the report itself have been developed pursuant to Public Law 97-415, the Nuclear Regulatory Commission (NRC) Authorization Act of 1982. The report provides information on recent uranium supply, demand, and marketing conditions, as well as projections of the domestic uranium industry's ability to continue to supply the needs of the domestic nuclear power industry through the year 2000. Industry capability is assessed under a variety of assumed conditions with respect to hypothetical disruptions of uranium imports. 13 refs., 26 figs., 37 tabs

The mining industry and the community: Joining forces for sustainable social development

International Nuclear Information System (INIS)

Labonne, B.

1999-01-01

This article joins the continuing policy debate over the social responsibility of corporations, particularly in the mining industry. The author argues that the 'old school mining orthodoxy' - approaching the exploitation of mineral deposits solely from the technical and economic points of view-is long dead. Mining companies must also encompass the social dimension. New policies for the mining industry are discussed in terms of recent worldwide trends and movements, e.g. globalization, economic interdependence and decentralization of governmental authority, and the rise of civil society as a political factor. These trends, together with the United Nations policies in quest of sustainable development and the consensus expressed at international conferences during the last decade, have deepened social awareness and set the stage for enhanced social responsiveness from the private sector. Socially responsible corporate policies include decentralization of decision-making to the field level, reaching out to stake holders and shareholders, supporting governments which provide official development assistance for good governance and building broad partnerships to reduce social exposures. (author)

Recent trends in Cuba’s mining and petroleum industries

Science.gov (United States)

Wacaster, Susan; Baker, Michael S.; Soto-Viruet, Yadira; Textoris, Steven D.

2015-03-31

In response to recent diplomatic developments between Cuba and the United States, the National Minerals Information Center compiled available information on the mineral industries of Cuba. This fact sheet highlights a new map and table that identify mines, mineral processing facilities, and petroleum facilities as well as information on location, operational status, and ownership. It also addresses the current status of known mineral industry projects, historical developments, and trends of the Cuban economy with an emphasis on mineral industries, and the supply and demand for Cuba’s mineral resources.In 2013, Cuba was estimated to be among the world’s top ten producers of cobalt and nickel, which are the country’s leading exports. Cuba’s current crude oil and associated natural gas production from onshore and shallow water coastal reservoirs is approximately 50,000 barrels per day of liquids and about 20,000 barrels per day oil equivalent of natural gas. In 2013, the value of mining and quarrying activities accounted for 0.6 percent of Cuba’s gross domestic product (GDP), compared with 1.4 percent in 2000. The value of production from Cuba’s industrial manufacturing sector increased by 88 percent between 1993 and 2013, whereas the sector’s share in the GDP decreased by about 3 percent during the same time period reflecting economic growth in other sectors of the economy.

On sustainable development of uranium mining industry in China based on the concept of ecological security

International Nuclear Information System (INIS)

Wu Shali; Tai Kaixuan

2011-01-01

Ecological security is an important issue for sustainable development of mining industry, on which the development of nuclear industry and nuclear power is based. But uranium mining and processing has larger effect on ecological environment which mainly include tailings, waste rock, waste water, and radiation effects. In this paper, the dialectical relationship between ecological security and sustainable relationship is analyzed, the ecological safety concept at home and abroad is compared and the role that ecological safety plays in the sustainable development of uranium mining based on analysis of restricting factors on uranium mining in China from the perspective of ecological security is also probed into. To achieve sustainable development of the uranium mining industry in China, an ecological security concept from four aspects must be established: 1) the concept of ecological security management; 2) the scientific concept of ecological security; 3) the concept of ecological security investment; and 4) the concept of ecological security responsibility. (authors)

Implications of the 1990 ICRP recommendations for the mining industry

International Nuclear Information System (INIS)

Fry, R.M.

1992-01-01

Significant radiological protection problems arise in the mining and processing of uranium and thorium bearing ores, beach sands and other materials that have enhanced levels of uranium (e.g. phosphate). They are at their most extreme in the underground mining of uranium. Under the new ICRP 60 occupational dose limits it may be necessary to subject virtually all mining operations to some degree of radiological surveillance. There are three principal modes of radiation exposure in uranium mining operations: gamma rays, an external whole body radiation hazard; the inhalation of radon daughter products; and the inhalation of ore dust containing the long-lived alpha emitting daughter products of uranium, principally 230Th and 226Ra. A number of the new recommendations in ICRP60 considered to have significant implications for the mining industry in general and the above mentioned issues in particular are discussed. These include the definition of occupational exposure occupational dose limit, the review of the radon dose limits, the system of radiological protection. The major conclusions and recommendation of the IAEA Technical Committee to Explore the Impact of the new ICRP Occupational Dose Limits in the operation of underground mines are also summarized. 18 refs., 1 tab

Mosaic crystals leading a new route to achieve ultrahigh thermoelectric performance

Institute of Scientific and Technical Information of China (English)

Yi Xie

2015-01-01

Solid-state thermoelectric technology uses electrons or holes as the working fluid for heat pumping and power generation.Adopting the technology in harvesting solar heat,converting waste industrial heat into electricity,and pumping out operational heat has tremendous potential in solid-state electronics applications.A combination of highly efficient electronic transport and low heat conductivity is a prerequisite for excellent thermoelectric performance.As these two requirements are substantially orthogonal,their synchronous realization is difficult in practice,hindering the commercial use of thermoelectricity[1,2].Scientists from the Shanghai Institute of Ceramics,Chinese Academy of Sciences,in collaboration with scien-

Light-triggered thermoelectric conversion based on a carbon nanotube-polymer hybrid gel.

Science.gov (United States)

Miyako, Eijiro; Nagata, Hideya; Funahashi, Ryoji; Hirano, Ken; Hirotsu, Takahiro

2009-01-01

Lights? Nanotubes? Action! A hydrogel comprising lysozymes, poly(ethylene glycol), phospholipids, and functionalized single-walled carbon nanotubes is employed for light-driven thermoelectric conversion. A photoinduced thermoelectric conversion module based on the hydrogel functions as a novel electric power generator (see image). This concept may find application in various industries, such as robotics and aerospace engineering.

Domestic uranium mining and milling industry 1989

International Nuclear Information System (INIS)

1990-01-01

Section 170B of the Atomic Energy Act of 1954, as amended by Public Law 97-415, requires that the Secretary of Energy submit to Congress an annual assessment of the viability of the domestic uranium mining and milling industry. The Energy Information Administration (EIA) of the Department of Energy (DOE) was assigned the responsibility to develop the criteria for use in estimating the viability of the industry. These criteria include four major attributes of industry viability - resource capability, supply response capability, financial capability, and import commitment dependency. Having established these criteria, the Secretary of Energy is required to monitor the industry and make an annual assessment of its viability for 1983 through 1992. The first six assessments were issued in the years 1984 through 1989 based on information available for 1983 through 1988, respectively. The current report provides the data and analyses, based on the information available through the end of the calendar year 1989, supporting the seventh annual assessment of the uranium industry's viability. It presents information on the four major attributes. Data on past and present industry behavior, as well as projections of the future status of the industry (assuming current market conditions), were used to examine the industry's ability to respond, over a 10-year period, to two hypothetical supply disruption scenarios. 20 figs., 23 tabs

Thermoelectric materials having porosity

Science.gov (United States)

Heremans, Joseph P.; Jaworski, Christopher M.; Jovovic, Vladimir; Harris, Fred

2014-08-05

A thermoelectric material and a method of making a thermoelectric material are provided. In certain embodiments, the thermoelectric material comprises at least 10 volume percent porosity. In some embodiments, the thermoelectric material has a zT greater than about 1.2 at a temperature of about 375 K. In some embodiments, the thermoelectric material comprises a topological thermoelectric material. In some embodiments, the thermoelectric material comprises a general composition of (Bi.sub.1-xSb.sub.x).sub.u(Te.sub.1-ySe.sub.y).sub.w, wherein 0.ltoreq.x.ltoreq.1, 0.ltoreq.y.ltoreq.1, 1.8.ltoreq.u.ltoreq.2.2, 2.8.ltoreq.w.ltoreq.3.2. In further embodiments, the thermoelectric material includes a compound having at least one group IV element and at least one group VI element. In certain embodiments, the method includes providing a powder comprising a thermoelectric composition, pressing the powder, and sintering the powder to form the thermoelectric material.

The South African mining industry

International Nuclear Information System (INIS)

Langton, G.

1982-01-01

This paper covers six of the many mining and associated developments in South Africa. These are: (1) Deep level gold mining at Western Deep Levels Limited - (2) Palabora Mining Company Limited - SA's unique copper mine - (3) Production of steel and vanadium-rich slag at Highveld Steel and Vanadium Corporation - (4) Coal mining at Kriel and Kleinkopje Collieries - (5) A mass mining system for use below the Gabbro Sill at Premier Diamond Mine - (6) Uranium production - joint metallurgical scheme- Orange Free State Gold Mines. - For publication in this journal the original paper has been summarised. Should any reader wish to have the full text in English he should write to the author at the address below. (orig.) [de

Thermoelectric System Absorbing Waste Heat from a Steel Ladle

Science.gov (United States)

Lu, Baiyi; Meng, Xiangning; Zhu, Miaoyong; Suzuki, Ryosuke O.

2018-06-01

China's iron and steel industry has made great progress in energy savings and emission reductions with the application of many waste heat recovery technologies. However, most of the medium and low temperature waste heat and radiant waste heat has not been effectively utilized. This paper proposes a thermoelectric system that generates electricity by absorbing the radiant heat from the surface of steel ladles in a steel plant. The thermoelectric behavior of modules in this system is analyzed by a numerical simulation method. The effects of external resistance and module structure on thermoelectric performance are also discussed in the temperature range of the wall surface of a steel ladle. The results show that the wall temperature has a significant influence on the thermoelectric behavior of the module, so its uniformity and stability should be considered in practical application. The ratio of the optimum external resistance to the internal resistance of the thermoelectric module is in the range of 1.6-2.0, which indicates the importance of external load optimization for a given thermoelectric system. In addition, the output power and the conversion efficiency of the module can be significantly improved by increasing the length of the thermoelectric legs and adopting a double-layer structure. Finally, through the optimization of external resistance and structure, the power output can reach 83-304 W/m2. This system is shown to be a promising approach for energy recovery.

Lignite industry in Greece within a world context: Mining, energy supply and environment

International Nuclear Information System (INIS)

Kavouridis, Konstantinos

2008-01-01

Today coal covers 38% of global production and roughly 30% of the EU-25 power output. In 2005 domestic lignite with a share of 60.5% in power generation and accounting about 30% of primary energy consumption is currently the most important indigenous fuel of Greece. Greece, mining 70 Mt annually, is the second lignite producer in the EU and fourth in the world. Approximately 97% of the lignite used to supply the existing lignite-fired power plants of Greece is mined by Public Power Corporation S.A. (PPC). Lignite as the base load fuel gives a competitive strength in PPC's and Greece's fuel mix. Due to lignite consumer prices in Greece are significantly below those in other comparable markets in EU-15. Extraction of lignite has a very long tradition. Significant achievements and large experience which has been gained during many years of mining operations place Greek lignite-mining industry in the leading position in Europe. The paper presents current state of Greek lignite industry, including operating mines, volume of production and other important production indicators as well as improvements in labor productivity and good results in industrial safety. The future of coal and specifically of Greek lignite will be crucially determined by environmentally compatible, i.e. low-CO 2 generation of electricity. Investment in modernization and renewal of the power plant fleet are the key to securing electricity supply and progress in preventing climate change

Spanish mining industry. Working mines. Research. Equipment. La mineria espanola. Explotaciones. Investigacion. Equipos

Energy Technology Data Exchange (ETDEWEB)

1982-01-01

The Spanish mining industry and the work of the organizations AITEMIN (Asociacion de Investigacion Tecnologica de Equipos Mineros), Laboratorio Oficial J.M. Madariaga, Instituto Geologico y Minero de Espana and Empresa Nacional Adaro de Investigaciones Mineras S.A. are described. A list of firms which are members of AITEMIN or SERCOBE (Asociacion Nacional de Fabricantes de Bienes de Equipo) is given. For each firm, the address and equipment manufactured is included.

Design Optimization of a Thermoelectric Cooling Module Using Finite Element Simulations

Science.gov (United States)

Abid, Muhammad; Somdalen, Ragnar; Rodrigo, Marina Sancho

2018-05-01

The thermoelectric industry is concerned about the size reduction, cooling performance and, ultimately, the production cost of thermoelectric modules. Optimization of the size and performance of a commercially available thermoelectric cooling module is considered using finite element simulations. Numerical simulations are performed on eight different three-dimensional geometries of a single thermocouple, and the results are further extended for a whole module as well. The maximum temperature rise at the hot and cold sides of a thermocouple is determined by altering its height and cross-sectional area. The influence of the soldering layer is analyzed numerically using temperature dependent and temperature independent thermoelectric properties of the solder material and the semiconductor pellets. Experiments are conducted to test the cooling performance of the thermoelectric module and the results are compared with the results obtained through simulations. Finally, cooling rate and maximum coefficient of performance (COPmax) are computed using convective and non-convective boundary conditions.

Domestic uranium mining and milling industry. 1984 viability assessment

International Nuclear Information System (INIS)

1985-01-01

This report presents the second annual assessment of the domestic uranium mining and milling industry's resource capability, supply response capability, financial capability, and import commitment dependency. The data and analysis in support of this assessment and the report itself have been developed pursuant to requirements set forth in Section 23(b) of Public Law 97-415, the Nuclear Regulatory Commission (NRC) Authorization Act, which was enacted on January 4, 1983. The report provides information on recent uranium supply, demand, and marketing conditions and projections of the domestic uranium industry's ability to continue to supply the needs of the domestic nuclear power industry through the year 2000. Industry capability is assessed under a variety of assumed conditions with respect to hypothetical disruptions of uranium imports

Introduction to thermoelectricity

CERN Document Server

Goldsmid, H Julian

2010-01-01

Introduction to Thermoelectricity is the latest work by Professor Julian Goldsmid drawing on his 55 years experience in the field. The theory of the thermoelectric and related phenomena is presented in sufficient detail to enable researchers to understand their observations and develop improved thermoelectric materials. The methods for the selection of materials and their improvement are discussed. Thermoelectric materials for use in refrigeration and electrical generation are reviewed. Experimental techniques for the measurement of properties and for the production of thermoelements are described. Special emphasis is placed on nanotechnology which promises to yield great improvements in the efficiency of thermoelectric devices. Chapters are also devoted to transverse thermoelectric effects and thermionic energy conversion, both techniques offering the promise of important applications in the future.

Ototoxicity in the South African mining industry: a position paper

CSIR Research Space (South Africa)

Edwards, AL

2013-02-01

Full Text Available This position paper asserts that exposure to chemicals in certain occupations and work activities in the mining industry can lead to ototoxicity which accentuates the problem of noise-induced hearing loss (NIHL). Increased awareness of all factors...

The thermoelectric process

Energy Technology Data Exchange (ETDEWEB)

Vining, C B

1997-07-01

The efficiency of thermoelectric technology today is limited by the properties of available thermoelectric materials and a wide variety of new approaches to developing better materials have recently been suggested. The key goal is to find a material with a large ZT, the dimensionless thermoelectric figure of merit. However, if an analogy is drawn between thermoelectric technology and gas-cycle engines then selecting different materials for the thermoelements is analogous to selecting a different working gas for the mechanical engine. And an attempt to improve ZT is analogous to an attempt to improve certain thermodynamic properties of the working-gas. An alternative approach is to focus on the thermoelectric process itself (rather than on ZT), which is analogous to considering alternate cycles such as Stirling vs. Brayton vs. Rankine etc., rather than merely considering alternative gases. Focusing on the process is a radically different approach compared to previous studies focusing on ZT. Aspects of the thermoelectric process and alternative approaches to efficient thermoelectric conversion are discussed.

Companies closely concerned with the mining industry have a training requirement

International Nuclear Information System (INIS)

Grossekemper, H.J.; Schmidt, B.; Schulenberg, F.

1994-01-01

In view of the serious economic situation the future decisions are extremely difficult for some companies closely concerned with the mining industry. The required orientation of the company towards new markets and new products requires not less, but more training and rethinking in all company divisions: from business management via personnel management to plant organisation and from marketing via development to quality assurance. This is proved by practical examples. An analysis by the ''Training'' working group has produced valuable information on the actual training requirement in the North Rhine-Westphalian engineering industry. It has worked out the concrete situation of the companies closely concerned with the mining industry in North Rhine-Westphalia from the point of view of their own training requirements. It is now the task of each individual company to analyse and reflect its concrete situation against the mirror of the results and to base the specific training requirement on the company aim. (orig.)

Water: A critical resource in the thermoelectric power industry

International Nuclear Information System (INIS)

Feeley, Thomas J. III.; McNemar, Andrea; Skone, Timothy J.; Stiegel, Gary J. Jr.; Nemeth, Michael; Schimmoller, Brian; Murphy, James T.; Manfredo, Lynn

2008-01-01

Water availability represents a growing concern for meeting future power generation needs. In the United States, projected population growth rates, energy consumption patterns, and demand from competing water use sectors will increase pressure on power generators to reduce water use. Water availability and use also exhibit strong regional variations, complicating the nature of public policy and technological response. The US Department of Energy's (DOE) National Energy Technology Laboratory (NETL) is engaged in a research and development (R and D) program to reduce freshwater withdrawal (total quantity of water utilized) and consumption (portion of withdrawal not returned to the source) from existing and future thermoelectric power generating facilities. The Innovations for Existing Plants (IEP) Program is currently developing technologies in 5 categories of water management projects to reduce water use while minimizing the impacts of plant operations on water quality. This paper outlines the freshwater withdrawal and consumption rates for various thermoelectric power generating types and then estimates the potential benefits of IEP program technologies at both the national and regional levels in the year 2030. NETL is working to protect and conserve water resources while leveraging domestic fossil fuel resources, such as coal, to increase national energy security. (author)

Ototoxicity in the South African mining industry: a position paper

CSIR Research Space (South Africa)

Edwards, AL

2013-02-01

Full Text Available Despite the attention that Noise-induced hearing loss (NIHL) prevention has received in the mining industry since 2003 when the milestone to eliminate NIHL was set, the statistics show that NIHL persists as one of the most common occupational...

Applying a small NPP in the Argentine mining industry

International Nuclear Information System (INIS)

Barrientos, C.J.; Masriera, N.A.

1998-01-01

The CAREM 25 reactor project is a small PWR nuclear power plant of 27 MWe, based on advanced concepts: a self-pressurized integral primary with natural convection of the coolant and a more simple and reliable general design. The CAREM concept has many advantages as a power generator in small electrical grids. Besides, there are some non-electrical applications under consideration, since a co-generation scheme seems very interesting from the economical point of view. In this category two alternatives have been considered: a standard desalination facility and a process plant in the mining industry. In this paper, a conceptual analysis of the second alternative is presented. Mining is a branch of the domestic industry that has shown a remarkable growth in the past three years mainly due to a steady inflow of foreign investments (about two billion dollars for that period). And one of the most attractive markets is in the extraction and manufacturing of non-ferrous minerals, coming from deposits in the northwest of Argentina: sodium sulfate, lithium salts, and boron compounds. Nevertheless it faces an unsolved problem in the energy high prices due to the fact that the production sites are located in remote areas where the only achievable energy source is the transportation of fuel oil. In this scenario, a small NPP may be a competitive source of process heat and electricity, with enough autonomy to uncouple fuel requirements from production strategies. The present study analyses the possible application of the CAREM concept in the non-ferrous mining industry of the Northwest of Argentina, considering a co-generation scheme. The main results of this analysis and the inherent advantages of the approach, show that the alternative may be feasible both from the technical and the economical points of view. (author)

Thermoelectric behavior of conducting polymers: On the possibility of off-diagonal thermoelectricity

Energy Technology Data Exchange (ETDEWEB)

Mateeva, N; Niculescu, H; Schlenoff, J; Testardi, L

1997-07-01

Non-cubic materials, when structurally aligned, possess sufficient anisotropy to exhibit thermoelectric effects where the electrical and thermal currents are orthogonal (off-diagonal thermoelectricity). The authors discuss the benefits of this form of thermoelectricity for devices and describe a search for suitable properties in the air-stable conducting polymers polyaniline and polypyrrole. They find the simple and general correlation that the logarithm of the electrical conductivity scales linearly with the Seebeck coefficient on doping but with proportionality in excess of the conventional prediction for thermoelectricity. The correlation is unexpected in its universality and unfavorable for thermoelectric applications. A simple model suggests that mobile charges of both signs exist in these polymers, and this leads to reduced thermoelectric efficiency. They also briefly discuss non air-stable polyacetylene, where ambipolar transport does not appear to occur, and where properties seem more favorable for thermoelectricity.

Nuclear-geophysical methods as a basis of progressive technology of ore quality control in mining industry

International Nuclear Information System (INIS)

Mejer, V.A.

1976-01-01

The significance of nuclear physics methods in the mining industry is demonstrated using examples of applying the X-ray diffraction method to the delimitation of lead-zinc and tin ores in exploratory wells, faces of mine workings and to a quick estimation of metal contents in hacked-off rocks and market payable ore. Their implementation at all stages of the exploration and development of deposits would improve the extraction of ores and reduce losses of the raw material during technological treatment. Owing to the rapidity and operativeness of control over the quality of ores at all stages of geological prospecting and mining, nuclear physics methods can provide a basis for technological progress in the mining industry

P-type Al-doped Cr-deficient CrN thin films for thermoelectrics

DEFF Research Database (Denmark)

Febvrier, Arnaud le; Van Nong, Ngo; Abadias, Gregory

2018-01-01

Thermoelectric properties of chromium nitride (CrN)-based films grown on c-plane sapphire by dc reactive magnetron sputtering were investigated. In this work, aluminum doping was introduced in CrN (degenerate n-type semiconductor) by co-deposition. Under the present deposition conditions, over......-type/n-type thermoelectric materials based on chromium nitride films, which are cheap and routinely grown on the industrial scale....

Physical capacity of rescue personnel in the mining industry

Directory of Open Access Journals (Sweden)

Hunt Andrew P

2008-10-01

Full Text Available Abstract Background The mining industry has one of the highest occupational rates of serious injury and fatality. Mine staff involved with rescue operations are often required to respond to physically challenging situations. This paper describes the physical attributes of mining rescue personnel. Methods 91 rescue personnel (34 ± 8.6 yrs, 1.79 ± 0.07 m, 90 ± 15.0 kg participating in the Queensland Mines Rescue Challenge completed a series of health-related and rescue-related fitness tasks. Health-related tasks comprised measurements of aerobic capacity (VO2max, abdominal endurance, abdominal strength, flexibility, lower back strength, leg strength, elbow flexion strength, shoulder strength, lower back endurance, and leg endurance. Rescue-related tasks comprised an incremental carry (IC, coal shovel (CS, and a hose drag (HD, completed in this order. Results Cardiovascular (VO2max and muscular endurance was average or below average compared with the general population. Isometric strength did not decline with age. The rescue-related tasks were all extremely demanding with heart rate responses averaging greater than 88% of age predicted maximal heart rates. Heart rate recovery responses were more discriminating than heart rates recorded during the tasks, indicating the hose drag as the most physically demanding of the tasks. Conclusion Relying on actual rescues or mining related work to provide adequate training is generally insufficient to maintain, let alone increase, physical fitness. It is therefore recommended that standards of required physical fitness be developed and mines rescue personnel undergo regularly training (and assessment in order to maintain these standards.

Efficient p-n junction-based thermoelectric generator that can operate at extreme temperature conditions

DEFF Research Database (Denmark)

Chavez, Ruben; Angst, Sebastian; Hall, Joseph

2017-01-01

In many industrial processes a large proportion of energy is lost in the form of heat. Thermoelectric generators can convert this waste heat into electricity by means of the Seebeck effect. However, the use of thermoelectric generators in practical applications on an industrial scale is limited...... in part because electrical, thermal, and mechanical bonding contacts between the semiconductor materials and the metal electrodes in current designs are not capable of withstanding thermal-mechanical stress and alloying of the metal-semiconductor interface when exposed to the high temperatures occurring...... in many real-world applications. Here we demonstrate a concept for thermoelectric generators that can address this issue by replacing the metallization and electrode bonding on the hot side of the device by a p-n junction between the two semiconductor materials, making the device robust against...

A case in support of implementing innovative bio-processes in the metal mining industry.

Science.gov (United States)

Sánchez-Andrea, Irene; Stams, Alfons J M; Weijma, Jan; Gonzalez Contreras, Paula; Dijkman, Henk; Rozendal, Rene A; Johnson, D Barrie

2016-06-01

The metal mining industry faces many large challenges in future years, among which is the increasing need to process low-grade ores as accessible higher grade ores become depleted. This is against a backdrop of increasing global demands for base and precious metals, and rare earth elements. Typically about 99% of solid material hauled to, and ground at, the land surface currently ends up as waste (rock dumps and mineral tailings). Exposure of these to air and water frequently leads to the formation of acidic, metal-contaminated run-off waters, referred to as acid mine drainage, which constitutes a severe threat to the environment. Formation of acid drainage is a natural phenomenon involving various species of lithotrophic (literally 'rock-eating') bacteria and archaea, which oxidize reduced forms of iron and/or sulfur. However, other microorganisms that reduce inorganic sulfur compounds can essentially reverse this process. These microorganisms can be applied on industrial scale to precipitate metals from industrial mineral leachates and acid mine drainage streams, resulting in a net improvement in metal recovery, while minimizing the amounts of leachable metals to the tailings storage dams. Here, we advocate that more extensive exploitation of microorganisms in metal mining operations could be an important way to green up the industry, reducing environmental risks and improving the efficiency and the economy of metal recovery. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

The future of the uranium mining industry

International Nuclear Information System (INIS)

Capus, G.; Galaud, G.

1993-01-01

This paper presents the state of natural Uranium market today. In a first part, the author gives a brief history about nuclear programs history in Usa and Europe and describes natural Uranium demand and supply (Uranium mines, recycling, excessive civil stocks, military stocks using). In a second part, evolutions and futures of Uranium industry is studied: using of excessive stocks in Western Europe, using of military stocks, recycling of Uranium from spent fuels reprocessing, uranium deposits, future natural uranium market. 6 refs., 4 figs., 3 tabs., 3 photos

'Heat Market Campaign' of the German coal mining industry

Energy Technology Data Exchange (ETDEWEB)

Dach, G.

1983-12-22

The ''Heat Market Campaign'', presented in June '83 by experts of all fields of coal mining, investigates the possibilities of coal sales promotion. The article reviews the main data of the heat market and discusses the ''Heat Market Campaign'' under the aspects of coal policy and energy policy. The campaign was started with the objectives of energy supply assurance in the Federal Republic of Germany, energy cost reduction on the consumer side, and stabilisation and development of coal markets not affected by the steel crisis. Sales goald on the household, trade and industrial sector are quantified, and obstacles preventing further expansion of the heat market are discussed. Apart from the mining industry's marketing concept for the heat market, there is also the possibility of receiving financial aid by the Federal government.

Environmental Impacts and Health Aspects in the Mining Industry. A Comparative Study of the Mining and Extraction of Uranium, Copper and Gold

International Nuclear Information System (INIS)

Nilsson, Jenny-Ann; Randhem, Johan

2008-01-01

This thesis work has analysed environmental impacts and health aspects in the mining industry of copper, uranium and gold with the aim of determining the relative performance, in a given set of parameters, of the uranium mining industry. A selection of fifteen active mining operations in Australia, Canada, Namibia, South Africa, and the United States of America constitute the subject of this study. The project includes detailed background information about mineral extraction methods, the investigated minerals and the mining operations together with descriptions of the general main health hazards and environmental impacts connected to mining. The mineral operations are investigated in a cradle to gate analysis for the year of activity of 2007 using the economic value of the product at the gate as functional unit. Primary data has been collected from environmental reports, company web pages, national databases and through personal contact with company representatives. The subsequent analysis examines the collected data from a resource consumption, human health and ecological consequences point of view. Using the Life Cycle Impact Assessment methodology of characterisation, primary data of environmental loads have been converted to a synoptic set of environmental impacts. For radiation and tailings issues, a more general approach is used to address the problem. Based on the collected data and the investigated parameters, the results indicate a presumptive relative disadvantageous result for the uranium mining industry in terms of health aspects but an apparent favourable relative result in terms of environmental impacts. Given the prerequisites of this study, it is not feasible to draw any unambiguous conclusions. Inabilities to do this are mainly related to inadequate data availability from mine sites (especially in areas concerning tailings management), and difficulties concerned with the relative valuation of specific performance parameters, in particular radiation

Environmental Impacts and Health Aspects in the Mining Industry. A Comparative Study of the Mining and Extraction of Uranium, Copper and Gold

Energy Technology Data Exchange (ETDEWEB)

Nilsson, Jenny-Ann; Randhem, Johan

2008-07-01

This thesis work has analysed environmental impacts and health aspects in the mining industry of copper, uranium and gold with the aim of determining the relative performance, in a given set of parameters, of the uranium mining industry. A selection of fifteen active mining operations in Australia, Canada, Namibia, South Africa, and the United States of America constitute the subject of this study. The project includes detailed background information about mineral extraction methods, the investigated minerals and the mining operations together with descriptions of the general main health hazards and environmental impacts connected to mining. The mineral operations are investigated in a cradle to gate analysis for the year of activity of 2007 using the economic value of the product at the gate as functional unit. Primary data has been collected from environmental reports, company web pages, national databases and through personal contact with company representatives. The subsequent analysis examines the collected data from a resource consumption, human health and ecological consequences point of view. Using the Life Cycle Impact Assessment methodology of characterisation, primary data of environmental loads have been converted to a synoptic set of environmental impacts. For radiation and tailings issues, a more general approach is used to address the problem. Based on the collected data and the investigated parameters, the results indicate a presumptive relative disadvantageous result for the uranium mining industry in terms of health aspects but an apparent favourable relative result in terms of environmental impacts. Given the prerequisites of this study, it is not feasible to draw any unambiguous conclusions. Inabilities to do this are mainly related to inadequate data availability from mine sites (especially in areas concerning tailings management), and difficulties concerned with the relative valuation of specific performance parameters, in particular radiation

A Long-Term Mathematical Model for Mining Industries

OpenAIRE

Achdou , Yves; Giraud , Pierre-Noel; Lasry , Jean-Michel; Lions , Pierre-Louis

2016-01-01

International audience; A parcimonious long term model is proposed for a mining industry. Knowing the dynamics of the global reserve, the strategy of each production unit consists of an optimal control problem with two controls, first the flux invested into prospection and the building of new extraction facilities, second the production rate. In turn, the dynamics of the global reserve depends on the individual strategies of the producers, so the models leads to an equilibrium, which is descr...

Development and Processing of p-type Oxide Thermoelectric Materials

DEFF Research Database (Denmark)

Wu, NingYu; Van Nong, Ngo

The main aim of this research is to investigate and develop well-performing p-type thermoelectric oxide materials that are sufficiently stable at high temperatures for power generating applications involving industrial processes. Presently, the challenges facing the widespread implementation...

A Thermoelectric Waste-Heat-Recovery System for Portland Cement Rotary Kilns

Science.gov (United States)

Luo, Qi; Li, Peng; Cai, Lanlan; Zhou, Pingwang; Tang, Di; Zhai, Pengcheng; Zhang, Qingjie

2015-06-01

Portland cement is produced by one of the most energy-intensive industrial processes. Energy consumption in the manufacture of Portland cement is approximately 110-120 kWh ton-1. The cement rotary kiln is the crucial equipment used for cement production. Approximately 10-15% of the energy consumed in production of the cement clinker is directly dissipated into the atmosphere through the external surface of the rotary kiln. Innovative technology for energy conservation is urgently needed by the cement industry. In this paper we propose a novel thermoelectric waste-heat-recovery system to reduce heat losses from cement rotary kilns. This system is configured as an array of thermoelectric generation units arranged longitudinally on a secondary shell coaxial with the rotary kiln. A mathematical model was developed for estimation of the performance of waste heat recovery. Discussions mainly focus on electricity generation and energy saving, taking a Φ4.8 × 72 m cement rotary kiln as an example. Results show that the Bi2Te3-PbTe hybrid thermoelectric waste-heat-recovery system can generate approximately 211 kW electrical power while saving 3283 kW energy. Compared with the kiln without the thermoelectric recovery system, the kiln with the system can recover more than 32.85% of the energy that used to be lost as waste heat through the kiln surface.

Thermoelectricity in liquid crystals

Science.gov (United States)

Mohd Said, Suhana; Nordin, Abdul Rahman; Abdullah, Norbani; Balamurugan, S.

2015-09-01

The thermoelectric effect, also known as the Seebeck effect, describes the conversion of a temperature gradient into electricity. A Figure of Merit (ZT) is used to describe the thermoelectric ability of a material. It is directly dependent on its Seebeck coefficient and electrical conductivity, and inversely dependent on its thermal conductivity. There is usually a compromise between these parameters, which limit the performance of thermoelectric materials. The current achievement for ZT~2.2 falls short of the expected threshold of ZT=3 to allow its viability in commercial applications. In recent times, advances in organic thermoelectrics been significant, improving by over 3 orders of magnitude over a period of about 10 years. Liquid crystals are newly investigated as candidate thermoelectric materials, given their low thermal conductivity, inherent ordering, and in some cases, reasonable electrical conductivity. In this work the thermoelectric behaviour of a discotic liquid crystal, is discussed. The DLC was filled into cells coated with a charge injector, and an alignment of the columnar axis perpendicular to the substrate was allowed to form. This thermoelectric behavior can be correlated to the order-disorder transition. A reasonable thermoelectric power in the liquid crystal temperature regime was noted. In summary, thermoelectric liquid crystals may have the potential to be utilised in flexible devices, as a standalone power source.

Synthesis and Characterization of Thermoelectric Oxides at Macro- and Nano-scales

Science.gov (United States)

Ma, Feiyue

Thermoelectric materials can directly convert a temperature difference into electrical voltage and vice versa. Due to this unique property, thermoelectric materials are widely used in industry and scientific laboratories for temperature sensing and thermal management applications. Waste heat harvesting, another potential application of thermoelectric materials, has long been limited by the low conversion efficiency of the materials. Potential high temperature applications, such as power plant waste heat harvesting and combustion engine exhaust heat recovery, make thermoelectric oxides a very promising class of thermoelectric materials. In this thesis, the synthesis and characterization of thermoelectric oxide materials are explored. In the first part of this thesis, the measurement methodologies and instrumentation processes employed to investigate different thermoelectric properties, such as the Seebeck coefficient and carrier concentration at the bulk scale and the thermal conductivity at the nanoscale, are detailed. Existing scientific and engineering challenges associated with these measurements are also reviewed. To overcome such problems, original parts and methodologies have been designed. Three fully functional systems were ultimately developed for the characterization of macroscale thermoelectric properties as well as localized thermal conductivity. In the second part of the thesis, the synthesis of NaxCo 2O4, a thermoelectric oxide material, is discussed. Modification of both composition and structure were carried out so as to optimize the thermoelectric performance of NaxCo2O4. Nanostructuring methods, such as ball milling, electrospinning, auto-combustion synthesis, and core-shell structure fabrication, have been developed to refine the grain size of NaxCo2O4 in order to reduce its thermal conductivity. However, the structure of the nanostructured materials is very unstable at high temperature and limited improvement on thermoelectric performance is

Occupational dermatoses in the uranium mining and processing industry

Energy Technology Data Exchange (ETDEWEB)

Sevcova, M [Zavodni Ustav Narodniho Zdravi Uranoveho Prumyslu, Pribram (Czechoslovakia)

1978-04-01

Experience gained so far by the Department of Dermatovenerology in the uranium industry discloses that the incidence of occupational dermatoses is relatively low in this industry. It represents about 1% of all newly ascertained skin diseases per year. Allergic contact eczemas after having been in contact with rubber products, chiefly rubber boots, predominate. Under the working conditions in mining and preparing uranium ore, ionizing radiation cannot induce non-stochastic effects of the type of radiation dermatitis on the skin. A higher incidence was, however, ascertained in uranium miners of basaliomas, which agrees with the estimation of the dose of external alpha radiation in the basal epidermis layer.

Coal-Mining Tailings as a Pozzolanic Material in Cements Industry

Directory of Open Access Journals (Sweden)

Santiago Yagüe

2018-01-01

Full Text Available The generation of enormous volumes of mine-tailing waste is standard practice in the mining industry. Large quantities of these tailings are also sources of kaolinite-rich materials that accumulate in slag heaps, causing significant environmental degradation and visual impacts on the landscape. The consequences of coal refuse dumped in slagheaps calls for the study of eco-innovative solutions and the assessment of waste types. Moreover, the environmental benefits of reusing large amounts of contaminated waste are also evident. Hence, the objective of this investigation is to expand current knowledge of new siliceous-aluminium minerals and their pozzolanic activity. Four raw tailing samples are characterized to determine their chemical (by ICP/MS analysis, morphological (by SEM/EDX analysis, and mineralogical (by XRD analysis compositions prior to their thermal activation that transforms the inert wastes at various temperatures into materials with cementitious properties. The results of XRD analysis following activation confirmed that the kaolinite content is fully transformed into metakaolinite. The coal refuse samples presented sufficiently reliable levels of pozzolanic activity for use as additives in industrial cements.

Applications of radio frequency identification systems in the mining industry

Energy Technology Data Exchange (ETDEWEB)

Hind, D J [Davis Derby Ltd., Derby (United Kingdom)

1995-07-01

Radio Frequency Identification Systems (RFID) are one of the automatic data capture technologies taking over from bar codes and magnetic swipe cards in many applications involving automatic hands free operation in arduous environments. RFID systems are based on the use of miniature radio transponders carrying encoded electronic data that is used to uniquely identify the identity of transponders. This paper reviews the types of system available and compares the various techniques involved in the different systems. The various types of transponder are described including the latest state of the art passive read/write high performance types. A review of the history of RFID systems in the mining industry is also given in the paper. The problems involved in designing and certifying a system for use in hazardous areas are also described, with particular reference to the problems of inadvertent detonator ignition by radio systems. Applications of RFID systems in the mining industry are described in considerable detail, covering applications both on the surface and underground. 1 ref., 12 figs., 1 tab.

A study on heat transfer enhancement using flow channel inserts for thermoelectric power generation

International Nuclear Information System (INIS)

Lesage, Frédéric J.; Sempels, Éric V.; Lalande-Bertrand, Nathaniel

2013-01-01

Highlights: • Thermal enhancement in a thermoelectric liquid generator is tested. • Thermal enhancement is brought upon by flow impeding inserts. • CFD simulations attribute thermal enhancement to velocity field alterations. • Thermoelectric power enhancement is measured and discussed. • Power enhancement relative to adverse pressure drop is investigated. - Abstract: Thermoelectric power production has many potential applications that range from microelectronics heat management to large scale industrial waste-heat recovery. A low thermoelectric conversion efficiency of the current state of the art prevents wide spread use of thermoelectric modules. The difficulties lie in material conversion efficiency, module design, and thermal system management. The present study investigates thermoelectric power improvement due to heat transfer enhancement at the channel walls of a liquid-to-liquid thermoelectric generator brought upon by flow turbulating inserts. Care is taken to measure the adverse pressure drop due to the presence of flow impeding obstacles in order to measure the net thermoelectric power enhancement relative to an absence of inserts. The results illustrate the power enhancement performance of three different geometric forms fitted into the channels of a thermoelectric generator. Spiral inserts are shown to offer a minimal improvement in thermoelectric power production whereas inserts with protruding panels are shown to be the most effective. Measurements of the thermal enhancement factor which represents the ratio of heat flux into heat flux out of a channel and numerical simulations of the internal flow velocity field attribute the thermal enhancement resulting in the thermoelectric power improvement to thermal and velocity field synergy

100 years of the main mine rescue service. A contribution to the protection against disasters in the coal mining industry; 100 Jahre Hauptstelle fuer das Grubenrettungswesen. Ein Beitrag zum Katastrophenschutz im Steinkohlenbergbau

Energy Technology Data Exchange (ETDEWEB)

Hermuelheim, Walter [RAG Aktiengesellschaft, Herne (Germany). Zentralbereich Arbeits-, Gesundheits- und Umweltschutz

2011-06-15

A review of 100 years of protection against disasters in the coal mining industry impressively shows the way from an era of major accidents to a modern branch of industry, which justifiably and with good prospects of success can pursue the aim of ''No accidents - no damage to health - no damage to the environment''. However, the development of the mine rescue service over more than 100 years - represented in the Ruhr by the Main Mine Rescue Service established in 1910 in Essen - would be incomplete without consideration of the allied technical fields underground fire protection and explosion protection. Cooperation between institutions such as the Tremonia test mine and the BVG has produced a safety level in all three fields, which is regarded as exemplary worldwide, and in addition to the latest mining technology is a good advertisement for the German coal mining industry. (orig.)

Report on observations and suggestions arising out of a visit to the gold mining industry in South Africa

CSIR Research Space (South Africa)

Reed, JJ

1968-02-01

Full Text Available Following a visit to the South African mining industry and the Chambers Research Organization, the author has presented a number of observations on various aspects of mining and mining research in the Republic. These observations relate generally...

Structural change of the mining components supplying industry, and innovative employment and qualification policies. A special study prepared on behalf of IKS. Final report

International Nuclear Information System (INIS)

Weber, B.

1992-01-01

The potentials and deficiencies of the mining components supplying industry are assessed by means of an industry study. Development prospects are derived for the mining sector. While individual solutions are neglected, methods which support the mining companies' efforts at diversifying and at opening up new markets are discussed placing emphasis on a sociocompatible implementation of the inevitable structural change and on the maintenance of a qualified industrial basis in communities dominated by the mining components supplying industry. The possibilities of cooperation between the companies are discussed, and conceivable future prospects are derived for the mining sector. (HS) [de

An oxide-based thermoelectric generator: Transversal thermoelectric strip-device

Science.gov (United States)

Teichert, S.; Bochmann, A.; Reimann, T.; Schulz, T.; Dreßler, C.; Töpfer, J.

2015-07-01

A special design of an oxide-based transversal thermoelectric device utilizing thermoelectric oxides in combination with a ceramic multilayer technology is proposed. Metal strips within the ceramic matrix replace the tilted stack of alternating layers used in artificial anisotropic transversal thermoelectric devices. Numerical three-dimensional simulations of both device types reveal better thermoelectric performance data for the device with metal stripes. A monolithic transversal strip-device based on the material combination La1.97Sr0.03CuO4/Ag6Pd1 was prepared and electrically characterized. A maximum power output of 4.0 mW was determined at ΔT = 225 K for the monolithic device. The observed results are in remarkable agreement with three-dimensional numerical simulations utilizing the transport parameters of the two materials and the geometry data of the device.

Environmental procedures for thermoelectric power plants by national mineral coal; Diretrizes ambientais para usinas termeletricas a carvao mineral nacional

Energy Technology Data Exchange (ETDEWEB)

Serra, M T.F.; Verney Gothe, C.A. de; Silva Ramos, R da

1990-01-01

This paper presents the environmental impacts decursive of utilization of South-Brazilian mineral coal to generation of electric energy. This environmental impacts and alternatives of attenuating measures are presented and evaluated, containing the totality of productive cycle: mining, processing, transport, stock piling and use in thermoelectric power plants. Environmental procedures are systematized for first time, in order to be observed in whole expansion of coal thermoelectric generator park. The conception of power plants and site studies of their useful lives are also included. (C.M.). 19 figs, 24 tabs.

A Long-Term Mathematical Model for Mining Industries

Energy Technology Data Exchange (ETDEWEB)

Achdou, Yves, E-mail: achdou@ljll.univ-paris-diderot.fr [Univ. Paris Diderot, Sorbonne Paris Cité, Laboratoire Jacques-Louis Lions, UMR 7598, UPMC, CNRS (France); Giraud, Pierre-Noel [CERNA, Mines ParisTech (France); Lasry, Jean-Michel [Univ. Paris Dauphine (France); Lions, Pierre-Louis [Collège de France (France)

2016-12-15

A parcimonious long term model is proposed for a mining industry. Knowing the dynamics of the global reserve, the strategy of each production unit consists of an optimal control problem with two controls, first the flux invested into prospection and the building of new extraction facilities, second the production rate. In turn, the dynamics of the global reserve depends on the individual strategies of the producers, so the models leads to an equilibrium, which is described by low dimensional systems of partial differential equations. The dimensionality depends on the number of technologies that a mining producer can choose. In some cases, the systems may be reduced to a Hamilton–Jacobi equation which is degenerate at the boundary and whose right hand side may blow up at the boundary. A mathematical analysis is supplied. Then numerical simulations for models with one or two technologies are described. In particular, a numerical calibration of the model in order to fit the historical data is carried out.

A Long-Term Mathematical Model for Mining Industries

International Nuclear Information System (INIS)

Achdou, Yves; Giraud, Pierre-Noel; Lasry, Jean-Michel; Lions, Pierre-Louis

2016-01-01

A parcimonious long term model is proposed for a mining industry. Knowing the dynamics of the global reserve, the strategy of each production unit consists of an optimal control problem with two controls, first the flux invested into prospection and the building of new extraction facilities, second the production rate. In turn, the dynamics of the global reserve depends on the individual strategies of the producers, so the models leads to an equilibrium, which is described by low dimensional systems of partial differential equations. The dimensionality depends on the number of technologies that a mining producer can choose. In some cases, the systems may be reduced to a Hamilton–Jacobi equation which is degenerate at the boundary and whose right hand side may blow up at the boundary. A mathematical analysis is supplied. Then numerical simulations for models with one or two technologies are described. In particular, a numerical calibration of the model in order to fit the historical data is carried out.

Responsible Mining: A Human Resources Strategy for Mine Development Project

OpenAIRE

Sampathkumar, Sriram (Ram)

2012-01-01

Mining is a global industry. Most mining companies operate internationally, often in remote, challenging environments and consequently frequently have respond to unusual and demanding Human Resource (HR) requirements. It is my opinion that the strategic imperative behind success in mining industry is responsible mining. The purpose of this paper is to examine how an effective HR strategy can be a competitive advantage that contributes to the success of a mining project in the global mining in...

Thermoelectric properties control due to doping level and sintering conditions for FGM thermoelectric element

CERN Document Server

Kajikawa, T; Shiraishi, K; Ohmori, M; Hirai, T

1999-01-01

Thermoelectric performance is determined with three factors, namely, Seebeck coefficient, electrical resistivity and thermal conductivity. For metal and single crystalline semiconductor, those factors have close interrelation each $9 other. However, as the sintered thermoelectric element has various levels of superstructure from macro scale and micro scale in terms of the thermoelectric mechanism, the relationship among them is more complex than that for the $9 melt- grown element, so it is suggested that the control of the temperature dependence of thermoelectric properties is possible to enhance the thermoelectric performance for wide temperature range due to FGM approach. The research $9 objective is to investigate the characteristics of the thermoelectric properties for various doping levels and hot-pressed conditions to make the thermoelectric elements for which the temperature dependence of the performance is $9 controlled due to FGM approach varying the doping levels and sintering conditions. By usage ...

Data mining application in industrial energy audit for lighting

Energy Technology Data Exchange (ETDEWEB)

Maricar, N.M.; Kim, G.C.; Jamal, N. [Kolej Univ., Melaka (Malaysia). Faculty of Electrical Engineering

2005-07-01

A data mining application for lighting energy audits at industrial sites was presented. Data collection was based on the parameters needed for the analysis part of the audit. Data collection included the activity for which the room was used; its dimension; light level readings in lux; the number of luminaries; the number of lamps per luminaries; lamp fixtures; and lamp wattage. The lumen method was used to calculate the recommended numbers of luminaries in the room. The number was then compared with the existing system's luminaries. The installed load efficacy ratio (ILER) was then used to determine proper retrofit action to maximize energy usage. The difference between the calculated lux and the standard lux was used to create data subsets. A data mining algorithm was used to determine that the ILER plays an important role in calculating the efficiency of lighting systems. It was also concluded that the method can be used to minimize the time needed to analyze large amounts of lighting data. The results of case studies were also used to show that the combined data mining algorithm provided accurate assessments using existing calculated data. 7 refs., 8 tabs., 5 figs.

New technology of bio-heap leaching uranium ore and its industrial application in Ganzhou uranium mine

International Nuclear Information System (INIS)

Fan Baotuan; Meng Yunsheng; Liu Jian; Meng Jin; Li Weicai; Xiao Jinfeng; Chen Sencai; Du Yuhai; Huang Bin

2006-10-01

Bioleaching mechanism of uranium ore is discussed. Incubation and selection of new strain, biomembrane oxidizing tank--a kind of new equipment for bacteria culture and oxidation regeneration of leaching agent are also introduced. The results of industrial experiment and industrial production are summarized. Compared with conventional heap leaching, bioleaching period and acid amount are reduced, oxidant and leaching agent are saved, and uranium concentration in leaching solution is increased. It is the first time to realize industrial production by bio-heap leaching in Chinese uranium mine. New equipment-biomembrane oxidizing tank give the basis of bio-heap leaching industrial application. Bio-heap leaching process is an effective technique to reform technique of uranium mine and extract massive low-content uranium ore in China. (authors)

Investment in the Community coal mining and iron and steel industries - 1981 survey

Energy Technology Data Exchange (ETDEWEB)

1982-01-01

The report has been prepared on the results of the 1981 survey of investments in the Community coal and steel industries. The survey which is conducted annually collects information on actual and forecast capital expenditure and production potential of coal and steel enterprises. The introductory chapter summarizes the results of the survey and the conclusions on them. Subsequent chapters examine in detail the results of the survey for each producing sector, namely: the coal mining industry; coking plants; briquetting plants; iron ore mines; and iron and steel industry. The annex contains a statement of the definitions under which the survey was carried out, together with tables giving a complete analysis of the results of the survey, including tables of capital expenditure and production potential by region and by category of plant for all sectors and categories of coal and steel products falling within the ECSC treaty. Editions are available in the seven community languages.

Investment in the Community coal mining and iron and steel industries - 1980 survey

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

The report has been prepared on the results of the 1980 survey of investments in the Community coal and steel industries. The survey, which is conducted annually, collects information on actual and forecast capital expenditure and production potential of coal and steel enterprises. The introductory chapter summarizes the results of the survey and the conclusions on them. Subsequent chapters of the report examine in detail the results of the survey for each producing sector, namely: the coal mining industry; coking plants; briquetting plants; iron-ore mines; and the iron and steel industry. The annex to the report contains a statement of the definitions under which the survey was carried out, together with tables giving a complete analysis of the results of the survey, including tables of capital expenditure and production potential by region and by category of plant for all sectors and categories of coal and steel products falling within the ECSC Treaty. Editions are available in six community languages.

Being a Child in an Industrial Contemporaneous Environment. Examples from the Mining Mountains of Cartagena-La Unión (Murcia

Directory of Open Access Journals (Sweden)

Óscar González Vergara

2013-05-01

Full Text Available This paper will discuss various aspects of childhood in an industrial environment, focusing particularly the phenomenon of child labor. We will draw examples from one of the most important industrial mining complex of contemporary Spain, the mining area in Cartagena-La Union, where child labor was widespread. We will complete this vision of childhood with the examples available in the mining songs, which reflect many aspects of childhood.

Evaluation of water resources around Barapukuria coal mine industrial area, Dinajpur, Bangladesh

Science.gov (United States)

Howladar, M. Farhad; Deb, Pulok Kanti; Muzemder, A. T. M. Shahidul Huqe; Ahmed, Mushfique

2014-09-01

Water is a very important natural resource which can be utilized in renewable or non-renewable forms but before utilizing, the evaluation of the quality of this resource is crucial for a particular use. However, the problems of water quality are more severe in areas where the mining and mineral processes' industries are present. In mining processes, several classes of wastes are produced which may turn into ultimately the sources of water quality and environmental degradation. In consequences, the evaluations of water quality for livestock, drinking, irrigation purposes and environmental implications have been carried out around the Barapukuria Coal Mining Industry under different methods and techniques such as primarily the field investigation; secondly the laboratory chemical analysis and thirdly justified the suitability of the laboratory analysis with statistical representation and correlation matrix, Schoeller plot, Piper's Trilinear diagram, Expanded Durov diagram, Wilcox diagram, US salinity diagram, Doneen's chart and others. The results of all surface and ground water samples analysis show that the characteristics and concentrations of all the major physical and chemical parameters such as pH, EC, TDS, Na+, K+, Ca2+, Mg2+, Fetotal, Cl-, HCO3 -, CO3 2- and SO4 2- are varied from one sample to other but well analogous with the WHO and EQS standard limit for all purposes in the area where the abundance of the major ions is as follows: Ca2+ > Na+ > Mg2+ > K+ > Fetotal = HCO3 - > SO4 2- > Cl- > CO3 2-. The graphical exposition of analytical data demonstrates two major hydrochemical facies for example: calcium-bicarbonate (Ca2+- HCO3 -) and magnesium-bicarbonate (Mg2+- HCO3 -) type facies which directly support the shallow recently recharged alkaline water around the industry. The calculated values for the evaluation classification of water based on TDS, Na%, EC, SAR, PI, RSC, MH, and TH replicate good to excellent use of water for livestock, drinking and

Team based risk assessment in the South African mining industry

Energy Technology Data Exchange (ETDEWEB)

Turner, J.; Ashworth, G.; Webger, S.; Protheroe, B. [CSIR, Auckland Park (South Africa). MineRisk Africa Division

1996-12-31

Improved health and safety for the large mining workforce in South Africa is a priority. Risk Assessments will be mandatory following the promulgation of the new health and safety act, due out in mid 1996. There is also a strong demand for employee organizations for participation in regulating the work process, particularly in the aspects of health and safety. The concept of system safety is that safe production is achieved through four ingredients, being, competent and trained personnel working according to appropriate standard operating practices using fit-for-purpose equipment in a well-controlled environment. A deficiency in any one of these areas will lead to an increased chance of operating problems and consequently accidents. The Mine Risk processes for risk assessment and management provide a mechanism for adopting this concept in practical mining operations; they provide a framework for identifying the root cause of safety problems as a basis for defining changes which will contribute significantly towards improving safety. The Mine Risk processes are applied practively and systematically to identify hazards and evaluate the magnitude of the associated risk in a defined aspect of the mining operation using a participative team based approach. The team, whose membership consists of highly experienced personnel drawn from all relevant departments and from positions ranging from manager to operator, then determines practical controls to reduce priority risks to acceptable levels. Team building is a natural product of this process, and should lead to higher productivity levels which is also a cause for concern. By using this process, a number of objectives of all the stakeholders in the South African Mining industry are addressed. 3 tabs.

Engineering and the Politics of Commensuration in the Mining and Petroleum Industries

OpenAIRE

Jessica M. Smith; Nicole M. Smith

2018-01-01

Engineers and applied scientists form the backbone of the mining and petroleum industries, yet rarely figure in social science accounts of natural resource extraction. This article begins to fill that gap by ethnographically exploring how community conflicts have prompted engineers and applied scientists working in these industries to reconsider the relationship between the surface and subsurface dimensions of their work. To make social concerns on the surface matter to how drilling and extra...

The Contribution of Individual, Social and Work Characteristics to Employee Mental Health in a Coal Mining Industry Population.

Directory of Open Access Journals (Sweden)

Robyn Considine

Full Text Available Evidence regarding the extent of mental health problems and the associated characteristics within an employee population is necessary to inform appropriate and tailored workplace mental health programs. Mental health within male dominated industries (such as mining has received recent public attention, chiefly through observations regarding suicide in such populations in Australia and internationally. Currently there is limited empirical evidence regarding the mental health needs in the mining industry as an exemplar of a male dominated workforce, and the relative contribution to such problems of individual, socio-economic and workplace factors. This study aimed to investigate the mental health and associated characteristics among employees in the Australian coal mining industry with a specific focus on identifying modifiable work characteristics.A cross-sectional study was conducted among employees (n = 1457 across eight coal mines stratified by key mine characteristics (state, mine type and employee commute arrangements. Participants completed measures of psychological distress (K10+ and key variables across four categories (socio-demographic characteristics, health history, current health behaviours, work attitudes and characteristics.Psychological distress levels within this sample were significantly higher in comparison with a community sample of employed Australians. The following factors contributed significantly to levels of psychological distress using hierarchical linear regression analysis: lower social networks; a past history of depression, anxiety or drug/alcohol problems; high recent alcohol use; work role (managers and a set of work characteristics (level of satisfaction with work, financial factors and job insecurity; perception of lower workplace support for people with mental health problems.This is the first study to examine the characteristics associated with mental health problems in the Australian coal mining industry. The

The Contribution of Individual, Social and Work Characteristics to Employee Mental Health in a Coal Mining Industry Population.

Science.gov (United States)

Considine, Robyn; Tynan, Ross; James, Carole; Wiggers, John; Lewin, Terry; Inder, Kerry; Perkins, David; Handley, Tonelle; Kelly, Brian

2017-01-01

Evidence regarding the extent of mental health problems and the associated characteristics within an employee population is necessary to inform appropriate and tailored workplace mental health programs. Mental health within male dominated industries (such as mining) has received recent public attention, chiefly through observations regarding suicide in such populations in Australia and internationally. Currently there is limited empirical evidence regarding the mental health needs in the mining industry as an exemplar of a male dominated workforce, and the relative contribution to such problems of individual, socio-economic and workplace factors. This study aimed to investigate the mental health and associated characteristics among employees in the Australian coal mining industry with a specific focus on identifying modifiable work characteristics. A cross-sectional study was conducted among employees (n = 1457) across eight coal mines stratified by key mine characteristics (state, mine type and employee commute arrangements). Participants completed measures of psychological distress (K10+) and key variables across four categories (socio-demographic characteristics, health history, current health behaviours, work attitudes and characteristics). Psychological distress levels within this sample were significantly higher in comparison with a community sample of employed Australians. The following factors contributed significantly to levels of psychological distress using hierarchical linear regression analysis: lower social networks; a past history of depression, anxiety or drug/alcohol problems; high recent alcohol use; work role (managers) and a set of work characteristics (level of satisfaction with work, financial factors and job insecurity; perception of lower workplace support for people with mental health problems. This is the first study to examine the characteristics associated with mental health problems in the Australian coal mining industry. The findings

A 3D TCAD simulation of a thermoelectric module configured for thermoelectric power generation, cooling and heating

Science.gov (United States)

Gould, C. A.; Shammas, N. Y. A.; Grainger, S.; Taylor, I.; Simpson, K.

2012-06-01

This paper documents the 3D modeling and simulation of a three couple thermoelectric module using the Synopsys Technology Computer Aided Design (TCAD) semiconductor simulation software. Simulation results are presented for thermoelectric power generation, cooling and heating, and successfully demonstrate the basic thermoelectric principles. The 3D TCAD simulation model of a three couple thermoelectric module can be used in the future to evaluate different thermoelectric materials, device structures, and improve the efficiency and performance of thermoelectric modules.

Thermo-electrical systems for the generation of electricity

International Nuclear Information System (INIS)

Bitschi, A.; Froehlich, K.

2010-01-01

This article takes a look at theoretical models concerning thermo-electrical systems for the generation of electricity and demonstrations of technology actually realised. The potentials available and developments are discussed. The efficient use of energy along the whole generation and supply chain, as well as the use of renewable energy sources are considered as being two decisive factors in the attainment of a sustainable energy supply system. The large amount of unused waste heat available today in energy generation, industrial processes, transport systems and public buildings is commented on. Thermo-electric conversion systems are discussed and work being done on the subject at the Swiss Federal Institute of Technology in Zurich is discussed. The findings are discussed and results are presented in graphical form

Encapsulation of high temperature thermoelectric modules

Energy Technology Data Exchange (ETDEWEB)

Salvador, James R.; Sakamoto, Jeffrey; Park, Youngsam

2017-07-11

A method of encapsulating a thermoelectric device and its associated thermoelectric elements in an inert atmosphere and a thermoelectric device fabricated by such method are described. These thermoelectric devices may be intended for use under conditions which would otherwise promote oxidation of the thermoelectric elements. The capsule is formed by securing a suitably-sized thin-walled strip of oxidation-resistant metal to the ceramic substrates which support the thermoelectric elements. The thin-walled metal strip is positioned to enclose the edges of the thermoelectric device and is secured to the substrates using gap-filling materials. The strip, substrates and gap-filling materials cooperatively encapsulate the thermoelectric elements and exclude oxygen and water vapor from atmospheric air so that the elements may be maintained in an inert, non-oxidizing environment.

What the coal industry requires from young mining engineers

Energy Technology Data Exchange (ETDEWEB)

Zilligen, K H

1986-04-24

A colliery manager gives his opinions on the requirements of the industry from young graduates of the Technical College of Mining in the Federal Republic of Germany. He suggests that there is a need for young, well educated graduates from colleges and universities; that all young engineers should start their careers in line management; and that technical college education should be operationally relevant. Suggestions are given for improving the current trainee programme at Minster Achenbach colliery.

Compliant Interfacial Layers in Thermoelectric Devices

Science.gov (United States)

Firdosy, Samad A. (Inventor); Li, Billy Chun-Yip (Inventor); Ravi, Vilupanur A. (Inventor); Fleurial, Jean-Pierre (Inventor); Caillat, Thierry (Inventor); Anjunyan, Harut (Inventor)

2017-01-01

A thermoelectric power generation device is disclosed using one or more mechanically compliant and thermally and electrically conductive layers at the thermoelectric material interfaces to accommodate high temperature differentials and stresses induced thereby. The compliant material may be metal foam or metal graphite composite (e.g. using nickel) and is particularly beneficial in high temperature thermoelectric generators employing Zintl thermoelectric materials. The compliant material may be disposed between the thermoelectric segments of the device or between a thermoelectric segment and the hot or cold side interconnect of the device.

The Effects of the Soledad Canyon Mine on the Aggregate Industry in the Greater Los Angeles Metropolitan Area

National Research Council Canada - National Science Library

Dixon, Lloyd

2001-01-01

.... In conducting this study, we assume that the mine operates between 2003 and 2022 and analyze how the mine would affect the costs of transporting aggregate, economic profits in the industry, the price...

Modelling of thermoelectric materials

DEFF Research Database (Denmark)

Bjerg, Lasse

In order to discover new good thermoelectric materials, there are essentially two ways. One way is to go to the laboratory, synthesise a new material, and measure the thermoelectric properties. The amount of compounds, which can be investigated this way is limited because the process is time...... consuming. Another approach is to model the thermoelectric properties of a material on a computer. Several crystal structures can be investigated this way without use of much man power. I have chosen the latter approach. Using density functional theory I am able to calculate the band structure of a material....... This band structure I can then use to calculate the thermoelectric properties of the material. With these results I have investigated several materials and found the optimum theoretical doping concentration. If materials with these doping concentrations be synthesised, considerably better thermoelectric...

Mine Water Treatment in Hongai Coal Mines

OpenAIRE

Dang Phuong Thao; Dang Vu Chi

2018-01-01

Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine ...

Niger Republic, mineral planning (part one)-Mining industries in socio-political and national economy framework

International Nuclear Information System (INIS)

Joo, Julien

1982-01-01

This document focus on Niger Republic mineral industries related points that are: socio-political and economical context; specific characters such as administrative, juridical and fiscal environment; citizens employment and training; actual situation and energy projects; transport; existing mining companies, construction materials enterprises and projects presentation; effect of mining sector and construction material on national economy and prior major problems to be solved [fr

ANALYSIS METHODS OF BANKRUPTCY RISK IN ROMANIAN ENERGY MINING INDUSTRY

Directory of Open Access Journals (Sweden)

CORICI MARIAN CATALIN

2016-12-01

Full Text Available The study is an analysis of bankruptcy risk and assessing the economic performance of the entity in charge of energy mining industry from southwest region. The scientific activity assesses the risk of bankruptcy using score’s method and some indicators witch reflecting the results obtained and elements from organization balance sheet involved in mining and energy which contributes to the stability of the national energy system. Analysis undertaken is focused on the application of the business organization models that allow a comprehensive assessment of the risk of bankruptcy and be an instrument of its forecast. In this study will be highlighted developments bankruptcy risk within the organization through the Altman model and Conan-Holder model in order to show a versatile image on the organization's ability to ensure business continuity

Solar thermoelectric generator

Science.gov (United States)

Toberer, Eric S.; Baranowski, Lauryn L.; Warren, Emily L.

2016-05-03

Solar thermoelectric generators (STEGs) are solid state heat engines that generate electricity from concentrated sunlight. A novel detailed balance model for STEGs is provided and applied to both state-of-the-art and idealized materials. STEGs can produce electricity by using sunlight to heat one side of a thermoelectric generator. While concentrated sunlight can be used to achieve extremely high temperatures (and thus improved generator efficiency), the solar absorber also emits a significant amount of black body radiation. This emitted light is the dominant loss mechanism in these generators. In this invention, we propose a solution to this problem that eliminates virtually all of the emitted black body radiation. This enables solar thermoelectric generators to operate at higher efficiency and achieve said efficient with lower levels of optical concentration. The solution is suitable for both single and dual axis solar thermoelectric generators.

Thermoelectric automotive waste heat energy recovery using maximum power point tracking

International Nuclear Information System (INIS)

Yu Chuang; Chau, K.T.

2009-01-01

This paper proposes and implements a thermoelectric waste heat energy recovery system for internal combustion engine automobiles, including gasoline vehicles and hybrid electric vehicles. The key is to directly convert the heat energy from automotive waste heat to electrical energy using a thermoelectric generator, which is then regulated by a DC-DC Cuk converter to charge a battery using maximum power point tracking. Hence, the electrical power stored in the battery can be maximized. Both analysis and experimental results demonstrate that the proposed system can work well under different working conditions, and is promising for automotive industry.

Modeling and Experimentation of New Thermoelectric Cooler–Thermoelectric Generator Module

Directory of Open Access Journals (Sweden)

Khaled Teffah

2018-03-01

Full Text Available In this work, a modeling and experimental study of a new thermoelectric cooler–thermoelectric generator (TEC-TEG module is investigated. The studied module is composed of TEC, TEG and total system heatsink, all connected thermally in series. An input voltage (1–5 V passes through the TEC where the electrons by means of Peltier effect entrain the heat from the upper side of the module to the lower one creating temperature difference; TEG plays the role of a partial heatsink for the TEC by transferring this waste heat to the total system heatsink and converting an amount of this heat into electricity by a phenomenon called Seebeck effect, of the thermoelectric modules. The performance of the TEG as partial heatsink of TEC at different input voltages is demonstrated theoretically using the modeling software COMSOL Multiphysics. Moreover, the experiment validates the simulation result which smooths the path for a new manufacturing thermoelectric cascade model for the cooling and the immediate electric power generation.

Mining for solutions, extracting discord: corporate social responsibility and canadian mining companies in Latin America

OpenAIRE

Stevens, Julie Ann

2009-01-01

While the mining industry generates many benefits to society, the industry has in some cases had a detrimental impact on affected communities. This paradox, manifested in the unequal distribution of costs and benefits amongst stakeholders, has prompted widespread scrutiny of the mining industry. Critique of the industry has questioned whether mining provides an economically, environmentally and socially sustainable model of development. Mining companies are increasingly adopting Corporate Soc...

General Approach for Composite Thermoelectric Systems with Thermal Coupling: The Case of a Dual Thermoelectric Cooler

Directory of Open Access Journals (Sweden)

Cuautli Yanehowi Flores-Niño

2015-06-01

Full Text Available In this work, we show a general approach for inhomogeneous composite thermoelectric systems, and as an illustrative case, we consider a dual thermoelectric cooler. This composite cooler consists of two thermoelectric modules (TEMs connected thermally in parallel and electrically in series. Each TEM has different thermoelectric (TE properties, namely thermal conductance, electrical resistance and the Seebeck coefficient. The system is coupled by thermal conductances to heat reservoirs. The proposed approach consists of derivation of the dimensionless thermoelectric properties for the whole system. Thus, we obtain an equivalent figure of merit whose impact and meaning is discussed. We make use of dimensionless equations to study the impact of the thermal conductance matching on the cooling capacity and the coefficient of the performance of the system. The equivalent thermoelectric properties derived with our formalism include the external conductances and all intrinsic thermoelectric properties of each component of the system. Our proposed approach permits us changing the thermoelectric parameters of the TEMs and the working conditions of the composite system. Furthermore, our analysis shows the effect of the number of thermocouples on the system. These considerations are very useful for the design of thermoelectric composite systems. We reproduce the qualitative behavior of a commercial composite TEM connected electrically in series.

The industrial panopticon: mining and the medical construction of migrant African labour in South Africa, 1900-1950.

Science.gov (United States)

Butchart, A

1996-01-01

Derived from a marxist/liberal humanist view of power, conventional critiques of the South African gold mining industry's medical apparatus see only its power to repress and negate the true bodily attributes and authentic person of the African mine worker. In so doing, they ignore the productive capacity of medical practice as a manifestation of what Foucault termed "disciplinary" power, by which the human body is manufactured and made manageable as an object of medical knowledge and industrial utilization. Accordingly, this paper offers just such a Foucaultian reading of South African mining medicine to demonstrate how it has operated to fabricate the bodies of African miners as visible objects possessed of distinct attributes that provoked particular strategies for their surveillance in health and disease.

Overview of the technological enhancement of natural radiation in the Brazilian non-uranium mining industry

International Nuclear Information System (INIS)

Fernandes, H.M.; Pires do Rio, M.A.; Rosa, R.; Veiga, L.H.S.; Amaral, E.C.S.

2002-01-01

The mining and milling of ores with significant amounts of uranium and thorium associated to the main ore has the potential to pose undue health risks to members of the general public and workers. In order to assess the status of this problem in the Brazilian non-uranium mining industries a comprehensive investigation project has been undertaken. The adopted methodology was based on the detailed analysis of each investigated industry operational flowplan, mass balance calculations, risk assessment (operational and post-operational scenarios taken into account) and environmental management principles. This papers addresses the main issues arising from the investigation effort, reports the most relevant conclusions and states the future studies to be implemented. It could be observed that these industries have the potential to cause relevant radiological impacts and must be regulated/controlled as to avoid these problems. (author)

Determine Appropriate Post Mining Land Use in Indonesia Coal Mining Using Land Suitability Evaluation

OpenAIRE

Maryati, Sri; Shimada, Hideki; Hamanaka, Akihiro; Sasaoka, Takashi; Matsui, Kikuo

2012-01-01

Coal mining industry gives many benefits for Indonesia including contribution in total Indonesian GDP. Most of coal mines in Indonesia are open pit mining method which disturbs large area of land. One of open pit mining impact is damage land and related to soil erosion occurrences it will degrade land by top soil loses. Indonesia Government has issued mine closure regulation to encourage mining industry provide post mining land use. Determination of post mining land use should be considering ...

Nanostructured Thermoelectric Oxide Materials for Effective Power Generation from Waste Heat

DEFF Research Database (Denmark)

Van Nong, Ngo; Pryds, Nini

A large amount of thermal energy that emitted from many industrial processes is available as waste heat. It is difficult to reclaim this heat due to the dispersed nature and relative smallness of its sources. Thermoelectric conversion can offer a very promising method to overcome these difficulties...... by converting heat directly into electricity. However, the requirements for this task place in the materials are not easily satisfied by the conventional thermoelectric materials. Not only they must possess a high thermoelectric performance, they should also be stable at high temperatures and be composed...... of nontoxic and low-cost elements, and must be able to be processed and shaped cheaply. Oxides are among the strongest candidate materials for this purpose, and recently they have been intensively investigated and developed [1-5]. In this report, the development progress of two state-of-the-art p-type Ca3Co4O...

Regulatory issues associated with exclusion, exemption, and clearance related to the mining and minerals processing industries

International Nuclear Information System (INIS)

Metcalf, P.; Woude, S. van der; Keenan, N.; Guy, S.

1997-01-01

The concepts of exclusion, exemption and clearance have been established in international recommendations and, standards for radiation protection and the management of radioactive waste in recent years. The consistent application of these concepts has given rise to various problems in different spheres of use. This is particularly the case in the mining and minerals processing industries dealing with materials exhibiting elevated concentrations of naturally occurring radionuclides. This paper takes the South African mining industry as an example and highlights some of the issues that have arisen in applying these concepts within a regulatory control regime. (author)

Environmentally sound development in the energy and mining industries

International Nuclear Information System (INIS)

1987-01-01

The paper contains the proceedings of a seminar on Strategies for Environmentally Sound Development in the Energy and Mining Industries, Crete, 1984. The seminar was structured around the following themes: 1) oil and gas exploration and production, 2) water power generation and storage projects, 3) electricity generating facilities, 4) restoration and after-use of disturbed land, 5) mineral development, 6) mineral and energy resources in fragile and remote ecosystems, and 7) general environmental issues. Two papers from the seminar were chosen and indexed separately. (U.K.)

Data mining-aided materials discovery and optimization

Directory of Open Access Journals (Sweden)

Wencong Lu

2017-09-01

Full Text Available Recent developments in data mining-aided materials discovery and optimization are reviewed in this paper, and an introduction to the materials data mining (MDM process is provided using case studies. Both qualitative and quantitative methods in machine learning can be adopted in the MDM process to accomplish different tasks in materials discovery, design, and optimization. State-of-the-art techniques in data mining-aided materials discovery and optimization are demonstrated by reviewing the controllable synthesis of dendritic Co3O4 superstructures, materials design of layered double hydroxide, battery materials discovery, and thermoelectric materials design. The results of the case studies indicate that MDM is a powerful approach for use in materials discovery and innovation, and will play an important role in the development of the Materials Genome Initiative and Materials Informatics.

Mine Water Treatment in Hongai Coal Mines

Science.gov (United States)

Dang, Phuong Thao; Dang, Vu Chi

2018-03-01

Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

Corporate social responsibility in the mining industry: Criteria and indicators

International Nuclear Information System (INIS)

Vintro, Carla; Comajuncosa, Josep

2010-01-01

Corporate Social Responsibility (CSR) includes economic, social and environmental aspects, and it has particular significance in mining. This paper explores the subject of CSR in the mining industry and the main synergies between CSR and environmental, safety and quality management systems, whose adoption has increased during recent decades. It proposes the establishment of a set of criteria for sustainability, ethics and human capital (to be called CSR criteria). Whilst various international bodies have proposed CSR guides and indicators (commonly used as references for Stock Market investments), there is evidence that the size of the company can act as a moderator factor to the adoption of those systems. The paper offers an easy-to-use CSR performance chart (composed of 31 indicators and a global index), intended as an internal measure for companies of CSR continuous improvement.

Mineral resources accounting: A technique formonitoring the Philippine mining industry for sustainable development

Science.gov (United States)

Santos, Teodoro M.; Zaratan, May L.

Mining which extracts exhaustible mineral resources has been condemned by certain sectors as promoting social inequity and underdevelopment. This is so because once a tonne of copper, say, is mined it is forever lost to the future generation. Such perception translates into policies that are usually disadvantageous or even hostile to the industry. Despite this adverse criticism, recent developments in natural resources accounting indicate that mining can truly contribute to the sustainable economic development of a society. True worth of mining in economic development can be assessed and monitored on a continuing basis through an appropriate system of natural accounts (SNA). If the industry is found deficient, such SNA can also point out how the industry can be made to constribute to sustainable growth. The prevailing SNA is criticized as having failed to capture the adverse effects on the welfare of society of producing a nonrenewable resource such as minerals. For instance, the production of copper for a particular year registers an increase in gross national product equivalent to its monetary value. However, the concomitant depletion of the country's natural wealth due to such production is nowhere recorded in the SNA. This faulty accounting gives rise to policies that result in nonsustainable economic growth. In order to address the preceding problem, this paper presents an accounting formula applicable to any nonrenewable resource whereby revenue is decomposed into income and capital components. To achieve sustainable economic growth, it states that the capital component must be invested to generate future incomes. However, investments need not be confined to the same sector. Application of the accounting scheme to the Philippine copper and gold sectors during the 1980-1990 period leads to the following conclusions: (a) by and large, gold and copper mining operations have indeed contributed positively to national income, contrary to allegations of certain

Thermoelectrical power analysis of precipitation in 6013 aluminum alloy

International Nuclear Information System (INIS)

Abdala, M.R.W.S.; Garcia de Blas, J.C.; Barbosa, C.; Acselrad, O.

2008-01-01

The 6013 aluminum alloy was first developed for application in the aircraft industry and, more recently, as a replacement option for the use of the 6061 alloy in the automotive industry. The present work describes the evolution of the process of formation and dissolution of different kinds of precipitates in 6013 aluminum alloy, subjected to different conditions of heat treatment, using for this purpose measurements of thermoelectrical power, Vickers microhardness and differential scanning calorimeter (DSC). Although in the last years many works have been published on the use of thermoelectrical power (TEP) measurements for the analysis of precipitation process in traditional alloys such as 6061, there is still little information related to 6013 alloy. The results obtained are compared with a previous characterization work on the same alloy using transmission electron microscopy. It was observed that TEP measurements are very sensitive to precipitation phenomena in this alloy, and it has been found that there is an inverse relation between TEP and Vickers microhardness values, which allowed proposing a precipitation sequence for 6013 aluminum alloy

Highly Efficient Segmented p-type Thermoelectric Leg

Science.gov (United States)

Sadia, Yatir; Ben-Yehuda, Ohad; Gelbstein, Yaniv

In the past years, energy demands in the entire world have been constantly increasing. This fact, coupled with the requirement for decreasing the world's dependence on fossil fuels, has given rise to the need for alternative energy sources. While no single alternative energy source can solely replace the traditional fossil fuels, the combination of several alternative power sources can greatly decrease their usage. Thermoelectricity is one way to produce such energy via the harvesting of waste heat into electricity. One common example is the automobile industry which in the past few years had been looking into the option of harvesting the waste heat created by the engine, around the exhaust pipe and in the catalytic converter. Thermoelectricity is ideal for such application since it can convert the energy directly into electric current without any moving parts, thereby extending the life cycle of the operation.

Universal Majorana thermoelectric noise

Science.gov (United States)

Smirnov, Sergey

2018-04-01

Thermoelectric phenomena resulting from an interplay between particle flows induced by electric fields and temperature inhomogeneities are extremely insightful as a tool providing substantial knowledge about the microscopic structure of a given system. By tuning, e.g., parameters of a nanoscopic system coupled via tunneling mechanisms to two contacts, one may achieve various situations where the electric current induced by an external bias voltage competes with the electric current excited by the temperature difference of the two contacts. Even more exciting physics emerges when the system's electronic degrees freedom split to form Majorana fermions which make the thermoelectric dynamics universal. Here, we propose revealing these unique universal signatures of Majorana fermions in strongly nonequilibrium quantum dots via noise of the thermoelectric transport beyond linear response. It is demonstrated that whereas mean thermoelectric quantities are only universal at large-bias voltages, the noise of the electric current excited by an external bias voltage and the temperature difference of the contacts is universal at any bias voltage. We provide truly universal, i.e., independent of the system's parameters, thermoelectric ratios between nonlinear response coefficients of the noise and mean current at large-bias voltages where experiments may easily be performed to uniquely detect these truly universal Majorana thermoelectric signatures.

Blood biomonitoring of metals in subjects living near abandoned mining and active industrial areas.

Science.gov (United States)

Madeddu, Roberto; Tolu, Paola; Asara, Yolande; Farace, Cristiano; Forte, Giovanni; Bocca, Beatrice

2013-07-01

A human blood biomonitoring campaign to detect the environmental exposure to metals (Cd, Cu, Cr, Mn, Pb and Zn) in 265 subjects was performed in the South-Western part of Sardinia (an Italian island) that is a particular area with a great history of coal and metal mining (Pb/Zn mainly) activities and large industrial structures (as metallurgy). Subjects living near the industrial plant area had geometric means (GM) of blood Cd (0.79 μg/l), Cu (971 μg/l), Mn (12.2 μg/l), and Pb (55.7 μg/l) significantly higher than controls (Cd, 0.47 μg/l; Cu, 900 μg/l; Mn 9.98 μg/l; Pb, 26.5 μg/l) and than people living nearby the past mining sites. Subjects living next to one dismissed mine were statistically higher in blood Cu (GM, 1,022 μg/l) and Pb (GM, 41.4 μg/l) concentrations than controls. No differences were observed in people living in the different mining sites, and this might be related to the decennial disclosure of mines and the adoption of environmental remediation programmes. Some interindividual variables influenced blood biomonitoring data, as smoke and age for Cd, gender for Cu, age, sex and alcohol for Pb, and age for Zn. Moreover, blood metal levels of the whole population were similar to reference values representative of the Sardinian population and acceptably safe according to currently available health guidelines.

Contract Mining versus Owner Mining – The Way Forward | Suglo ...

African Journals Online (AJOL)

Ghana Mining Journal ... By contracting out one or more of their mining operations, the mining companies can concentrate on their core businesses. This paper reviews ... The general trends in the mining industry show that contract mining will be the way forward for most mines under various circumstances in the future.

Social license to operate: case from brazilian mining industry

Science.gov (United States)

Santiago, Ana Lúcia F.; Demajorovic, Jacques; Aledo, Antonio

2015-04-01

The approach of the Social License to Operate (SLO) emerges as an important element in academic discussions and business practices related to extractive industries. It appears that in productive activities with great potential to produce economic, social and environmental impacts, conventional approaches based on legal compliance no longer sufficient to legitimize the actions of companies and engagement stakeholders. Studies highlight the need of mining activities receiving a SLO "issued" by companies stakeholders, including society, government, non-governmental organizations, media and communities. However, local communities appears as major stakeholders in governance arrangements, by virtue of its proximity to extractive areas and ability to affect the company's results. Stakeholders with unmet expectations can generate conflicts and risks to the company, the knowledge of these expectations and an awareness of company managers of the importance of Social License to Operate (SLO), can generate strategies and mitigating actions to prevent and or minimize possible conflicts. The concept of SLO arises in engineering extractive industry, when you need to respond to social challenges, beyond the usual environmental challenges, technological and management. According to Franks and Cohen (2012) there is a tendency of engineering sectors, sustainability, environmental, safety and especially in risk mappings, treat the technological issues in a neutral manner, separating the technological research projects of social influences. I want to contribute to the advancement of the debate on stakeholder engagement and adopting as focus on the company's relationship with the community, the aim of this study was to understand how a social project held by one of the largest mining companies in Brazil contributed to the process of SLO. This methodological procedure adopted was a qualitative, descriptive, and exploratory interviews with the communities located in rural areas of direct

ENVIRONMENTAL MANAGEMENT OF MINE WATER, CONSIDERING EUROPEAN WATER LEGISLATION. CASE STUDY OF MEGALOPOLIS MINES

OpenAIRE

Dimitrakopoulos, D.; Vassiliou, E.; Tsangaratos, P.; Ilia, I.

2017-01-01

Mining activities causes many environmental problems to the surrounding areas, as other industrial activities do also. However mine water pollution, is considered a tough task to handle, as it requires specific regulations, quite distinct from those applicable to most other industrial processes. Even though there are several federal laws and regulations in Greece and in the European Union that influences the mining industry and mine water management, still certain factors complicates their im...

Simple experiments with a thermoelectric module

International Nuclear Information System (INIS)

Kraftmakher, Yaakov

2005-01-01

The Seebeck and Peltier effects are explored with a commercially available thermoelectric module and a data-acquisition system. Five topics are presented: (i) thermoelectric heating and cooling, (ii) the Seebeck coefficient, (iii) efficiency of a thermoelectric generator, (iv) the maximum temperature difference provided by a thermoelectric cooler and (v) the Peltier coefficient and the coefficient of performance. Using a data-acquisition system, the measurements are carried out in a reasonably short time. It is shown how to deduce quantities important for the theory and applications of thermoelectric devices

A guide to mines and mining houses of the Republic of South Africa

Energy Technology Data Exchange (ETDEWEB)

1989-02-01

This guide lists the mining houses of the Republic of South Africa and the mines under their respective control. It is intended as a guide for British exporters wishing to develop business with the South African mining industry and hence includes buying offices and senior buying personnel in South Africa (and in the UK where relevant). Amongst the 16 mining houses included are the Chamber of Mines of South Africa, De Beers Consolidated Mines Ltd., Rand Mines Ltd., Sasol Ltd. and the South African Iron and Steel Industrial Corporation Ltd.

International mining forum 2004, new technologies in underground mining, safety in mines proceedings

Energy Technology Data Exchange (ETDEWEB)

Jerzy Kicki; Eugeniusz Sobczyk (eds.)

2004-01-15

The book comprises technical papers that were presented at the International Mining Forum 2004. This event aims to bring together scientists and engineers in mining, rock mechanics, and computer engineering, with a view to explore and discuss international developments in the field. Topics discussed in this book are: trends in the mining industry; new solutions and tendencies in underground mines; rock engineering problems in underground mines; utilization and exploitation of methane; prevention measures for the control of rock bursts in Polish mines; and current problems in Ukrainian coal mines.

Thermoelectricity for future sustainable energy technologies

Directory of Open Access Journals (Sweden)

Weidenkaff Anke

2017-01-01

Full Text Available Thermoelectricity is a general term for a number of effects describing the direct interconversion of heat and electricity. Thermoelectric devices are therefore promising, environmental-friendly alternatives to conventional power generators or cooling units. Since the mid-90s, research on thermoelectric properties and their applications has steadily increased. In the course of years, the development of high-temperature resistant TE materials and devices has emerged as one of the main areas of interest focusing both on basic research and practical applications. A wide range of innovative and cost-efficient material classes has been studied and their properties improved. This has also led to advances in synthesis and metrology. The paper starts out with thermoelectric history, basic effects underlying thermoelectric conversion and selected examples of application. The main part focuses on thermoelectric materials including an outline of the design rules, a review on the most common materials and the feasibility of improved future high-temperature thermoelectric converters.

Biological recovery of metals, sulfur and water in the mining and metallurgical industry

NARCIS (Netherlands)

Weijma, J.; Copini, C.F.M.; Buisman, C.J.N.; Schultz, C.E.

2002-01-01

Metals of particular interest in acid mine drainage and industrial wastewaters include copper, zinc, cadmium, arsenic, manganese, aluminum, lead, nickel, silver, mercury, chromium, uranium and iron, in a concentration that can range from 106 to 102 g/l. The composition of such wastewater reflects

Mine Water Treatment in Hongai Coal Mines

Directory of Open Access Journals (Sweden)

Dang Phuong Thao

2018-01-01

Full Text Available Acid mine drainage (AMD is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

Thermoelectric generator cooling system and method of control

Science.gov (United States)

Prior, Gregory P; Meisner, Gregory P; Glassford, Daniel B

2012-10-16

An apparatus is provided that includes a thermoelectric generator and an exhaust gas system operatively connected to the thermoelectric generator to heat a portion of the thermoelectric generator with exhaust gas flow through the thermoelectric generator. A coolant system is operatively connected to the thermoelectric generator to cool another portion of the thermoelectric generator with coolant flow through the thermoelectric generator. At least one valve is controllable to cause the coolant flow through the thermoelectric generator in a direction that opposes a direction of the exhaust gas flow under a first set of operating conditions and to cause the coolant flow through the thermoelectric generator in the direction of exhaust gas flow under a second set of operating conditions.

Apparatuses And Systems For Embedded Thermoelectric Generators

KAUST Repository

Hussain, Muhammad M.; Inayat, Salman Bin; Smith, Casey Eben

2013-01-01

An apparatus and a system for embedded thermoelectric generators are disclosed. In one embodiment, the apparatus is embedded in an interface where the ambient temperatures on two sides of the interface are different. In one embodiment, the apparatus is fabricated with the interface in integrity as a unitary piece. In one embodiment, the apparatus includes a first thermoelectric material embedded through the interface. The apparatus further includes a second thermoelectric material embedded through the interface. The first thermoelectric material is electrically coupled to the second thermoelectric material. In one embodiment, the apparatus further includes an output structure coupled to the first thermoelectric material and the second thermoelectric material and configured to output a voltage.

Apparatuses And Systems For Embedded Thermoelectric Generators

KAUST Repository

Hussain, Muhammad M.

2013-08-08

An apparatus and a system for embedded thermoelectric generators are disclosed. In one embodiment, the apparatus is embedded in an interface where the ambient temperatures on two sides of the interface are different. In one embodiment, the apparatus is fabricated with the interface in integrity as a unitary piece. In one embodiment, the apparatus includes a first thermoelectric material embedded through the interface. The apparatus further includes a second thermoelectric material embedded through the interface. The first thermoelectric material is electrically coupled to the second thermoelectric material. In one embodiment, the apparatus further includes an output structure coupled to the first thermoelectric material and the second thermoelectric material and configured to output a voltage.

Thermoelectric refrigerator having improved temperature stabilization means

International Nuclear Information System (INIS)

Falco, C.M.

1982-01-01

A control system for thermoelectric refrigerators is disclosed. The thermoelectric refrigerator includes at least one thermoelectric element that undergoes a first order change at a predetermined critical temperature. The element functions as a thermoelectric refrigerator element above the critical temperature, but discontinuously ceases to function as a thermoelectric refrigerator element below the critical temperature. One example of such an arrangement includes thermoelectric refrigerator elements which are superconductors. The transition temperature of one of the superconductor elements is selected as the temperature control point of the refrigerator. When the refrigerator attempts to cool below the point, the metals become superconductors losing their ability to perform as a thermoelectric refrigerator. An extremely accurate, first-order control is realized

Co-generation system with a linear concentrator and thermoelectric elements; Senkei shukokei to netsuden henkan soshi wo mochiita netsuden heikyu system

Energy Technology Data Exchange (ETDEWEB)

Kachi, E; Suzuki, A; Fujibayashi, K [Tokyo University of Agriculture and Technology, Tokyo (Japan)

1996-10-27

The co-generation system using a solar cell has the disadvantage that the performance of a cell element deteriorates when the temperature rises. Therefore, the co-generation system in which a BiTe thermoelectric element and linear Fresnel lens are used was constructed. Moreover, the basic characteristics were confirmed and the characteristics of a system model were analyzed. A thermoelectric element area must be reduced to improve the generating efficiency. The generating efficiency depends on the temperature difference between thermoelectric elements rather than the thermoelectric element area. As the thermoelectric area gets lower, the generating efficiency will get higher. This inclination is advantageous on the economic side. The generating efficiency becomes low during operation at high temperature. As a result, the temperature supplied to the thermal load is set to the lower position (100 to 200{degree}C) so as to advance the validity of the system. Even if the co-generation temperature is low, a heat supply capability of 150{degree}C is sufficient for an industrial heat supply system because it holds a large majority of the consumption demand for the whole industry. 3 refs., 8 figs., 3 tabs.

FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

Energy Technology Data Exchange (ETDEWEB)

Kenneth L. Knittel

2005-05-09

The work performed on this program was to develop wear resistant, tough FM composite materials with efforts focused on WC-Co based FM systems. The materials were developed for use in mining industry wear applications. Components of interest were drill bit inserts for drilling blast holes. Other component applications investigated included wear plates for a variety of equipment such as pit shovels, wear surfaces for conveyors, milling media for ball milling operations, hydrocyclone cones, grader blades and dozer teeth. Cross-cutting technologies investigated included hot metal extrusion dies, drill bits for circuit board fabrication, cutting tools for cast iron and aluminum machining. An important part of the work was identification of the standard materials used in drilling applications. A materials trade study to determine those metals and ceramics used for mining applications provided guidance for the most important materials to be investigated. WC-Co and diamond combinations were shown to have the most desirable properties. Other considerations such as fabrication technique and the ability to consolidate shifted the focus away from diamond materials and toward WC-Co. Cooperating partners such as Kennametal and Kyocera assisted with supplies, evaluations of material systems, fabricated parts and suggestions for cross-cutting technology applications for FM architectures. Kennametal provided the raw materials (WC-Co and Al-TiCN powders) for the extent of the material evaluations. Kyocera shared their research into various FM systems and provided laboratory testing of fabricated materials. Kyocera also continued research of the FM systems with the intention of developing commercial markets for a variety of applications. The continued development of FM technology by Kyocera is seen as a direct result of the cooperation established under this funding. Kyocera has a specific interest in the commercial development of the FM technology and have licensed it and have paid

Intensifying waste water clarification in heavy and mining industries for sanitation of rivers in the Katowice district

Energy Technology Data Exchange (ETDEWEB)

Paluch, J.; Twardowska, I.

1976-01-01

This article presents a detailed account of the state of water pollution in the main and tributary rivers of the heavily populated and industrialized district of Katowice, Poland: Results of surveys in the years 1969 to 1972 are given. Several tables and maps show the degree of water pollution in rivers, the amount to which the values exceed pollution standards, percentage of treated and untreated industrial waste water entering the rivers, the classification of river sections according to their content of suspensions, phenols and salt. Further figures show the effectiveness of water cleaning flocculating agents and of waste water treatment at coking plants. Black coal mining and processing contributes the greater part to pollution of the rivers. Only 54% of mining industry waste water is cleaned mechanically and 3% chemically. The amount of 3,300 t/d of chlorite and sulfate salts is led into the rivers primarily from the Rybnik coal mining area. The clarification of waste water resulting from hydraulic stowing and from flotation processes is described as most problematic. Research efforts are being made at economic desalination and suspension flocculation. In the coking industry waste water is treated in 88% of the plants, but dephenolization takes place in only 50% of the plants. (29 refs.) (In German)

Recent Progress on PEDOT-Based Thermoelectric Materials.

Science.gov (United States)

Wei, Qingshuo; Mukaida, Masakazu; Kirihara, Kazuhiro; Naitoh, Yasuhisa; Ishida, Takao

2015-02-16

The thermoelectric properties of poly(3,4-ethylenedioxythiophene) (PEDOT)-based materials have attracted attention recently because of their remarkable electrical conductivity, power factor, and figure of merit. In this review, we summarize recent efforts toward improving the thermoelectric properties of PEDOT-based materials. We also discuss thermoelectric measurement techniques and several unsolved problems with the PEDOT system such as the effect of water absorption from the air and the anisotropic thermoelectric properties. In the last part, we describe our work on improving the power output of thermoelectric modules by using PEDOT, and we outline the potential applications of polymer thermoelectric generators.

Effects of the energy and mining industry on management of national competitiveness

Directory of Open Access Journals (Sweden)

Peter Madzík

2016-04-01

influence of energy and mining industry on competitiveness over the last 40 years has increased, particularly in the case of countries with low or medium economic development, and it has decreased in developed countries. The resulting information about the intensity of the mutual relations might be useful for management of competitiveness and planning of strategic economic tools.

Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas

Science.gov (United States)

Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

2015-01-01

Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area. PMID:26580644

Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas.

Science.gov (United States)

Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

2015-11-13

Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area.

The 3rd annual Australian contract mining conference

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

Papers discussed: the termination of contract debate - implications for the industry; contract industry`s outlook; viability of contract mining at ERA`s Ranger mine in the Northern Territory; obtaining superior operational performance, and reducing risk, using mining contractors; industry consolidation, contracts and market trends; mining equipment financing - the operating lease alternative; Portman Mining Ltd.; development of contract mining within the coal operations of Eastern Australia; case study - Thiess. contractors` experience in operating the Collinsville coal mine for the MIM/Itochu joint venture; integrating contractor management on mines with duty of care; the risk variables; and conflicting objectives - mine optimisation and the underground contract.

Apparatus, System, and Method for On-Chip Thermoelectricity Generation

KAUST Repository

Hussain, Muhammad Mustafa

2012-01-26

An apparatus, system, and method for a thermoelectric generator. In some embodiments, the thermoelectric generator comprises a first thermoelectric region and a second thermoelectric region, where the second thermoelectric region may be coupled to the first thermoelectric region by a first conductor. In some embodiments, a second conductor may be coupled to the first thermoelectric region and a third conductor may be coupled to the second thermoelectric region. In some embodiments, the first conductor may be in a first plane, the first thermoelectric region and the second thermoelectric region may be in a second plane, and the second conductor and the third conductor may be in a third plane.

Apparatus, System, and Method for On-Chip Thermoelectricity Generation

KAUST Repository

Hussain, Muhammad Mustafa; Fahad, Hossain M.; Rojas, Jhonathan Prieto

2012-01-01

An apparatus, system, and method for a thermoelectric generator. In some embodiments, the thermoelectric generator comprises a first thermoelectric region and a second thermoelectric region, where the second thermoelectric region may be coupled to the first thermoelectric region by a first conductor. In some embodiments, a second conductor may be coupled to the first thermoelectric region and a third conductor may be coupled to the second thermoelectric region. In some embodiments, the first conductor may be in a first plane, the first thermoelectric region and the second thermoelectric region may be in a second plane, and the second conductor and the third conductor may be in a third plane.

Effect of the mining industry on the formation of regions based on the example of tentative concepts of Lyublinskiy coal basin

Energy Technology Data Exchange (ETDEWEB)

Pazdziora, J

1977-01-01

It has been noted that large industrial centers and population centers often arise in areas where there are valuable mineral deposits. The role of the mining industry as a factor in the formation of industrial regions grew rapidly during the industrial revolution, when coal replaced wood as a source of energy. Gigantic industrial-urban settlements grew up in the area of coal basins in an uncontrolled manner with chaotic disruption, so that at the present time their further development and modernization is quite difficult. The complex of factors in the formation of modern coal basins was taken into consideration in draft concepts in building the central region of the Lyublinskiy coal basin. Specific mining and geological conditions of the basin, as well as the nature of the region which was non-industrial until recently are included. It makes it possible to develop a modern model of the mining surface which differs from former ones because it has a technical and social-municipal infrastructure which is rational from the organizational and engineering standpoint and has a favorable effect on the environment.

Efficient p-n junction-based thermoelectric generator that can operate at extreme temperature conditions

Science.gov (United States)

Chavez, Ruben; Angst, Sebastian; Hall, Joseph; Maculewicz, Franziska; Stoetzel, Julia; Wiggers, Hartmut; Thanh Hung, Le; Van Nong, Ngo; Pryds, Nini; Span, Gerhard; Wolf, Dietrich E.; Schmechel, Roland; Schierning, Gabi

2018-01-01

In many industrial processes, a large proportion of energy is lost in the form of heat. Thermoelectric generators can convert this waste heat into electricity by means of the Seebeck effect. However, the use of thermoelectric generators in practical applications on an industrial scale is limited in part because electrical, thermal, and mechanical bonding contacts between the semiconductor materials and the metal electrodes in current designs are not capable of withstanding thermal-mechanical stress and alloying of the metal-semiconductor interface when exposed to the high temperatures occurring in many real-world applications. Here we demonstrate a concept for thermoelectric generators that can address this issue by replacing the metallization and electrode bonding on the hot side of the device by a p-n junction between the two semiconductor materials, making the device robust against temperature induced failure. In our proof-of-principle demonstration, a p-n junction device made from nanocrystalline silicon is at least comparable in its efficiency and power output to conventional devices of the same material and fabrication process, but with the advantage of sustaining high hot side temperatures and oxidative atmosphere.

Glasses obtained from industrial wastes

International Nuclear Information System (INIS)

Bortoluzzi, D.; Oliveira Fillho, J.; Uggioni, E.; Bernardin, A.M.

2009-01-01

This paper deals with the study of the vitrification mechanism as an inertization method for industrial wastes contaminated with heavy metals. Ashes from coal (thermoelectric), wastes from mining (fluorite and feldspar) and plating residue were used to compose vitreous systems planed by mixture design. The chemical composition of the wastes was determined by XRF and the formulations were melted at 1450 deg C for 2h using 10%wt of CaCO 3 (fluxing agent). The glasses were poured into a mold and annealed (600 deg C). The characteristic temperatures were determined by thermal analysis (DTA, air, 20 deg C/min) and the mechanical behavior by Vickers microhardness. As a result, the melting temperature is strongly dependent on silica content of each glass, and the fluorite residue, being composed mainly by silica, strongly affects Tm. The microhardness of all glasses is mainly affected by the plating residue due to the high iron and zinc content of this waste. (author)

Exploring the challenges associated with the greening of supply chains in the South African manganese and phosphate mining industry

Directory of Open Access Journals (Sweden)

R.I. David Pooe

2014-11-01

Full Text Available As with most mining activities, the mining of manganese and phosphate has serious consequences for the environment. Despite a largely adequate and progressive framework for environmental governance developed since 1994, few mines have integrated systems into their supply chain processes to minimise environmental risks and ensure the achievement of acceptable standards. Indeed, few mines have been able to implement green supply chain management (GrSCM. The purpose of this article was to explore challenges related to the implementation of GrSCM and to provide insight into how GrSCM can be implemented in the South African manganese and phosphate industry. This article reported findings of a qualitative study involving interviews with 12 participants from the manganese and phosphate industry in South Africa. Purposive sampling techniques were used. Emerging from the study were six themes, all of which were identified as key challenges in the implementation of GrSCM in the manganese and phosphate mining industry. From the findings, these challenges include the operationalisation of environmental issues, lack of collaboration and knowledge sharing, proper application of monitoring and control systems,lack of clear policy and legislative direction, the cost of implementing GrSCM practices, and the need for strong leadership and management of change. On the basis of the literature reviewed and empirical findings, conclusions were drawn and policy and management recommendations were accordingly made.

Strategic Implications of Water Usage: an Analysis in Brazilian Mining Industries

Directory of Open Access Journals (Sweden)

Roberto Schoproni Bichueti

2014-04-01

Full Text Available This study aims at identifying the practices of water use management and the business performance in industries in the Brazilian mineral sector. To this end, a descriptive and quantitative study was developed, using the survey method, in industries associated with the Brazilian Mining Institute – IBRAM. The water use management practices were identified based in a model addressing the following aspects: water accounting, risk assessment, direct operations, supply chain, and stakeholders engagement. The business performance was measured from a model involving the following dimensions: economic, environmental and social. Among the results, the risks assessment involved and the direct operations practices stand out, in order to reduce the amount of water used and waste discharges. The need for greater engagement of industries with the stakeholders and the supply chain, through a more integrated and collaborative management, was also evident.

Dynamic thermoelectricity in uniform bipolar semiconductor

Energy Technology Data Exchange (ETDEWEB)

Volovichev, I.N., E-mail: vin@ire.kharkov.ua

2016-07-01

The theory of the dynamic thermoelectric effect has been developed. The effect lies in an electric current flowing in a closed circuit that consists of a uniform bipolar semiconductor, in which a non-uniform temperature distribution in the form of the traveling wave is created. The calculations are performed for the one-dimensional model in the quasi-neutrality approximation. It was shown that the direct thermoelectric current prevails, despite the periodicity of the thermal excitation, the circuit homogeneity and the lack of rectifier properties of the semiconductor system. Several physical reasons underlining the dynamic thermoelectric effect are found. One of them is similar to the Dember photoelectric effect, its contribution to the current flowing is determined by the difference in the electron and hole mobilities, and is completely independent of the carrier Seebeck coefficients. The dependence of the thermoelectric short circuit current magnitude on the semiconductor parameters, as well as on the temperature wave amplitude, length and velocity is studied. It is shown that the magnitude of the thermoelectric current is proportional to the square of the temperature wave amplitude. The dependence of the thermoelectric short circuit current on the temperature wave length and velocity is the nonmonotonic function. The optimum values for the temperature wave length and velocity, at which the dynamic thermoelectric effect is the greatest, have been deduced. It is found that the thermoelectric short circuit current changes its direction with decreasing the temperature wave length under certain conditions. The prospects for the possible applications of the dynamic thermoelectric effect are also discussed.

Environmental Impact Report for thermoelectric from coal in Candiota region - Brazil; RIMA para termeletrica a carvao na regiao de Candiota

Energy Technology Data Exchange (ETDEWEB)

Rossato, A C; Camison, F L; Ladniuk, S T [Companhia Estadual de Energia Eletrica do Estado do Rio Grande do Sul, Porto Alegre, RS (Brazil)

1990-12-31

The principles for executing the Environmental Impact Studies and the elaboration of Environmental Impact Report, referring to the first module of Candiota III Thermoelectric Plant, near to the Electric Energy State Company are described, with some aspects about the mine, plant, region, executor corporations and comprehend area for the environmental impact studies. (C.G.C.).

Simulation of Industrial Wastewater Treatment from the Suspended Impurities into the Flooded Waste Mining Workings

Science.gov (United States)

Bondareva, L.; Zakharov, Yu; Goudov, A.

2017-04-01

The paper is dedicated to the mathematical model of slurry wastewater treatment and disposal in a flooded mine working. The goal of the research is to develop and analyze the mathematical model of suspended impurities flow and distribution. Impurity sedimentation model is under consideration. Due to the sediment compaction problem solution domain can be modified. The model allows making a forecast whether volley emission is possible. Numerical simulation results for “Kolchuginskaya” coal mine presented. Impurity concentration diagrams in outflow corresponding to the real full-scale data obtained. Safely operation time mine workings like a wastewater treatment facility are estimated. The carried out calculations demonstrate that the method of industrial wastewater treatment in flooded waste mine workings can be put into practice but it is very important to observe all the processes going on to avoid volley emission of accumulated impurities.

Design of thermoelectrically highly efficient Heusler compounds using phase separations and nano-composites under an economic point of view

Science.gov (United States)

Balke, Benjamin

Half-Heusler (HH) compounds are one of the most promising candidates for thermoelectric materials for automotive and industrial waste heat recovery applications. In this talk, I will give an overview about our recent investigations of phase separations in HH thermoelectrics, focusing on the ternary system TiNiSn-ZrNiSn-HfNiSn. I will show how we adapted this knowledge to design a p-type HH compound which exhibits a ZT that is increased by 130% compared to the best published bulk p-type Heusler. I will also present how we used the phase separation to design thermoelectric highly efficient nano-composites of different single-phase materials. Since the price for Hafnium doubled within the last year, our research focused on the design of HH compounds without Hafnium. I will present a very recent calculation on ZT per Euro and efficiency per Euro for various materials followed by our latest very promising results for n-type Heusler compunds without Hafnium resulting in 20 times higher ZT/Euro values. These results strongly underline the importance of phase separations as a powerful tool for designing highly efficient materials for thermoelectric applications that fulfill the industrial demands for a thermoelectric converter. The author gratefully acknowledges financial support by the thermoHEUSLER2 Project (Project No. 19U15006F) of the German Federal Ministry of Economics and Technology (BMWi).

Physiological strain in the Hungarian mining industry: The impact of physical and psychological factors.

Science.gov (United States)

Varga, József; Nagy, Imre; Szirtes, László; Pórszász, János

2016-01-01

The objectives of these investigations completed on workplaces in the Hungarian mining industry were to characterize the physiological strain of workers by means of work pulse and to examine the effects of work-related psychological factors. Continuous heart rate (HR) recording was completed on 71 miners over a total of 794 shifts between 1987 and 1992 in mining plants of the Hungarian mining industry using a 6-channel recorder - Bioport (ZAK, Germany). The work processes were simultaneously documented by video recording along with drawing up the traditional ergonomic workday schedule. All workers passed health evaluation for fitness for work. The effects of different psychological factors (simulated danger, "instrument stress," presence of managers, and effect of prior involvement in accidents as well as different mining technologies and work place illumination) on the work pulse were evaluated. The statistical analysis was completed using SPSS software (version 13.0, SPSS Inc., USA). The work-related physiological strain differed between work places with different mining technologies in groups of 12-18 workers. The work pulse was lowest in bauxite mining (ΔHR = 22±8.9 bpm) and highest in drift drilling in dead rock with electric drilling machine (ΔHR = 30±6.9 bpm). During sham alarm situation the work pulse was significantly higher than during normal activities with the same physical task (ΔHR = 36.7±4.8 bpm vs. 25.8±1.6 bpm, p < 0.001). When work was performed under different psychological stress, the work pulse was consistently higher, while improving the work place illumination decreased the physiological strain appreciably (ΔHR (median, 25-75 percentiles) = 23, 20-26 bmp vs. 28, 25-31.3 bpm, p < 0.001). Recording the heart rate during whole-shift work along with the work conditions gives reliable results and helps isolating factors that contribute to increased strain. The results can be used to implement preventive and health promotion measures. This

Physiological strain in the Hungarian mining industry: The impact of physical and psychological factors

Directory of Open Access Journals (Sweden)

József Varga

2016-08-01

Full Text Available Objectives: The objectives of these investigations completed on workplaces in the Hungarian mining industry were to characterize the physiological strain of workers by means of work pulse and to examine the effects of work-related psychological factors. Material and Methods: Continuous heart rate (HR recording was completed on 71 miners over a total of 794 shifts between 1987 and 1992 in mining plants of the Hungarian mining industry using a 6-channel recorder – Bioport (ZAK, Germany. The work processes were simultaneously documented by video recording along with drawing up the traditional ergonomic workday schedule. All workers passed health evaluation for fitness for work. The effects of different psychological factors (simulated danger, “instrument stress,” presence of managers, and effect of prior involvement in accidents as well as different mining technologies and work place illumination on the work pulse were evaluated. The statistical analysis was completed using SPSS software (version 13.0, SPSS Inc., USA. Results: The work-related physiological strain differed between work places with different mining technologies in groups of 12–18 workers. The work pulse was lowest in bauxite mining (ΔHR = 22±8.9 bpm and highest in drift drilling in dead rock with electric drilling machine (ΔHR = 30±6.9 bpm. During sham alarm situation the work pulse was significantly higher than during normal activities with the same physical task (ΔHR = 36.7±4.8 bpm vs. 25.8±1.6 bpm, p < 0.001. When work was performed under different psychological stress, the work pulse was consistently higher, while improving the work place illumination decreased the physiological strain appreciably (ΔHR (median, 25–75 percentiles = 23, 20–26 bmp vs. 28, 25–31.3 bpm, p < 0.001. Conclusions: Recording the heart rate during whole-shift work along with the work conditions gives reliable results and helps isolating factors that contribute to increased strain. The

Thermoelectrics and its energy harvesting

National Research Council Canada - National Science Library

Rowe, David Michael

2012-01-01

.... It details the latest techniques for the preparation of thermoelectric materials employed in energy harvesting, together with advances in the thermoelectric characterisation of nanoscale material...

Electronic cooling using thermoelectric devices

Energy Technology Data Exchange (ETDEWEB)

Zebarjadi, M., E-mail: m.zebarjadi@rutgers.edu [Department of Mechanical and Aerospace Engineering, Rutgers University, Piscataway, New Jersey 08854 (United States); Institute of Advanced Materials, Devices, and Nanotechnology, Rutgers University, Piscataway, New Jersey 08854 (United States)

2015-05-18

Thermoelectric coolers or Peltier coolers are used to pump heat in the opposite direction of the natural heat flux. These coolers have also been proposed for electronic cooling, wherein the aim is to pump heat in the natural heat flux direction and from hot spots to the colder ambient temperature. In this manuscript, we show that for such applications, one needs to use thermoelectric materials with large thermal conductivity and large power factor, instead of the traditionally used high ZT thermoelectric materials. We further show that with the known thermoelectric materials, the active cooling cannot compete with passive cooling, and one needs to explore a new set of materials to provide a cooling solution better than a regular copper heat sink. We propose a set of materials and directions for exploring possible materials candidates suitable for electronic cooling. Finally, to achieve maximum cooling, we propose to use thermoelectric elements as fins attached to copper blocks.

Uranium mining: industry performance will continue to be driven by trends in the output and price or uranium

International Nuclear Information System (INIS)

2006-01-01

Industry revenue, which rose very strongly in the mid 2000s on the back of higher prices and higher production, is expected to retreat during the outlook i period. Indications are that a small gain in real industry revenue will be made in 2007-08, reflecting slightly higher output and some- what higher Australian dollar contract prices. However, real industry revenue is then expected to fall over the remaining years of the out- , look period, as output and exports edge lower and prices ease. Production from Ranger is expected to ease as mining winds down and the operation becomes ore processing only, and no new mines or mine expansions will come on stream over this relatively short period. Large increases in spot uranium prices in the mid 2000s were driven by falling uranium stocks, increased concern over future uranium supplies and growing speculative demand for uranium. Despite very large price rises, world uranium production responded only slowly, reflect-ing the long lead-time required to either expand existing operations or bring new developments on stream

AN ANALYSIS OF MAINTENANCE PERFORMANCE SYSTEMS IN THE SOUTH AFRICAN MINING INDUSTRY

Directory of Open Access Journals (Sweden)

Kotze, R. L. M.

2012-11-01

Full Text Available The measurement of performance is an essential part of the management process. The planning function usually defines the goals and objectives for the business enterprise or division of the enterprise. The control function should monitor the performance measures and establish corrective action if actual performance deviates significantly from planned performance. Maintenance performance measurement is therefore essential to ensure that maintenance objectives are achieved, and that maintenance adds value for the company. The objective of this paper is to discuss the findings of a project that investigated aspects of the maintenance performance system of a number of mining companies in South Africa. The findings of a survey indicated that maintenance performance management is not yet used to its full potential in the mining industry.

PV-hybrid and thermoelectric collectors

Energy Technology Data Exchange (ETDEWEB)

Rockendorf, G.; Sillmann, R. [Institut fuer Solarenergieforschung GmbH, Emmerthal (Germany); Podlowski, L.; Litzenburger, B. [SolarWerk GmbH, Teltow (Germany)

1999-07-01

Two different principles of thermoelectric cogeneration solar collectors have been realized and investigated. Concerning the first principle, the thermoelectric collector (TEC) delivers electricity indirectly by first producing heat and subsequently generating electricity by means of a thermoelectric generator. Concerning the second principle, the photovoltaic-hybrid collector (PVHC) uses photovoltaic cells, which are cooled by a liquid heat-transfer medium. The characteristics of both collector types are described. Simulation modules have been developed and implemented in TRNSYS 14.1 (1994), in order to simulate their behaviour in typical domestic hot-water systems. The discussion of the results shows that the electric output of the PV-hybrid collector is significantly higher than that of the thermoelectric collector. (author)

semiconducting nanostructures: morphology and thermoelectric properties

Science.gov (United States)

Culebras, Mario; Torán, Raquel; Gómez, Clara M.; Cantarero, Andrés

2014-08-01

Semiconducting metallic oxides, especially perosvkite materials, are great candidates for thermoelectric applications due to several advantages over traditionally metallic alloys such as low production costs and high chemical stability at high temperatures. Nanostructuration can be the key to develop highly efficient thermoelectric materials. In this work, La 1- x Ca x MnO 3 perosvkite nanostructures with Ca as a dopant have been synthesized by the hydrothermal method to be used in thermoelectric applications at room temperature. Several heat treatments have been made in all samples, leading to a change in their morphology and thermoelectric properties. The best thermoelectric efficiency has been obtained for a Ca content of x=0.5. The electrical conductivity and Seebeck coefficient are strongly related to the calcium content.

Proximity to mining industry and respiratory diseases in children in a community in Northern Chile: A cross-sectional study.

Science.gov (United States)

Herrera, Ronald; Radon, Katja; von Ehrenstein, Ondine S; Cifuentes, Stella; Muñoz, Daniel Moraga; Berger, Ursula

2016-06-07

In a community in northern Chile, explosive procedures are used by two local industrial mines (gold, copper). We hypothesized that the prevalence of asthma and rhinoconjunctivitis in the community may be associated with air pollution emissions generated by the mines. A cross-sectional study of 288 children (aged 6-15 years) was conducted in a community in northern Chile using a validated questionnaire in 2009. The proximity between each child's place of residence and the mines was assessed as indicator of exposure to mining related air pollutants. Logistic regression, semiparametric models and spatial Bayesian models with a parametric form for distance were used to calculate odds ratios and 95 % confidence intervals. The prevalence of asthma and rhinoconjunctivitis was 24 and 34 %, respectively. For rhinoconjunctivitis, the odds ratio for average distance between both mines and child's residence was 1.72 (95 % confidence interval 1.00, 3.04). The spatial Bayesian models suggested a considerable increase in the risk for respiratory diseases closer to the mines, and only beyond a minimum distance of more than 1800 m the health impact was considered to be negligible. The findings indicate that air pollution emissions related to industrial gold or copper mines mainly occurring in rural Chilean communities might increase the risk of respiratory diseases in children.

Mortality experience among Minnesota taconite mining industry workers.

Science.gov (United States)

Allen, Elizabeth M; Alexander, Bruce H; MacLehose, Richard F; Ramachandran, Gurumurthy; Mandel, Jeffrey H

2014-11-01

To evaluate the mortality experience of Minnesota taconite mining industry workers. Mortality was evaluated between 1960 and 2010 in a cohort of Minnesota taconite mining workers employed by any of the seven companies in operation in 1983. Standardised mortality ratios (SMR) were estimated by comparing observed deaths in the cohort with expected frequencies in the Minnesota population. Standardised rate ratios (SRR) were estimated using an internal analysis to compare mortality by employment duration. The cohort included 31,067 workers with at least 1 year of documented employment. Among those, there were 9094 deaths, of which 949 were from lung cancer, and 30 from mesothelioma. Mortality from all causes was greater than expected in the Minnesota population (SMR=1.04, 95% CI 1.02 to 1.04). Mortality from lung cancer and mesothelioma was higher than expected with SMRs of 1.16 for lung cancer (95% CI 1.09 to 1.23) and 2.77 for mesothelioma (95% CI 1.87 to 3.96). Other elevated SMRs included those for cardiovascular disease (SMR=1.10, 95% CI 1.06 to 1.14), specifically for hypertensive heart disease (SMR=1.81, 95% CI 1.39 to 2.33) and ischemic heart disease (SMR=1.11, 95% CI 1.07 to 1.16). Results of the SRR analysis did not show variation in risk by duration of employment. This study provides evidence that taconite workers may be at increased risk for mortality from lung cancer, mesothelioma, and some cardiovascular disease. Occupational exposures during taconite mining operations may be associated with these increased risks, but non-occupational exposures may also be important contributors. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Investigation into slipping and falling accidents and materials handling in the South African mining industry.

CSIR Research Space (South Africa)

Schutte, PC

2003-03-01

Full Text Available The objective of this study was to analyze information on slipping and falling accidents and materials handling activities in the South African mining industry. Accident data pertaining to slipping, falling and materials handling accidents...

A review of thermoelectric cooling: Materials, modeling and applications

International Nuclear Information System (INIS)

Zhao, Dongliang; Tan, Gang

2014-01-01

This study reviews the recent advances of thermoelectric materials, modeling approaches, and applications. Thermoelectric cooling systems have advantages over conventional cooling devices, including compact in size, light in weight, high reliability, no mechanical moving parts, no working fluid, being powered by direct current, and easily switching between cooling and heating modes. In this study, historical development of thermoelectric cooling has been briefly introduced first. Next, the development of thermoelectric materials has been given and the achievements in past decade have been summarized. To improve thermoelectric cooling system's performance, the modeling techniques have been described for both the thermoelement modeling and thermoelectric cooler (TEC) modeling including standard simplified energy equilibrium model, one-dimensional and three-dimensional models, and numerical compact model. Finally, the thermoelectric cooling applications have been reviewed in aspects of domestic refrigeration, electronic cooling, scientific application, and automobile air conditioning and seat temperature control, with summaries for the commercially available thermoelectric modules and thermoelectric refrigerators. It is expected that this study will be beneficial to thermoelectric cooling system design, simulation, and analysis. - Highlights: •Thermoelectric cooling has great prospects with thermoelectric material's advances. •Modeling techniques for both thermoelement and TEC have been reviewed. •Principle thermoelectric cooling applications have been reviewed and summarized

NANOSTRUCTURING AS A WAY FOR THERMOELECTRIC EFFICIENCY IMPROVEMENT

Directory of Open Access Journals (Sweden)

L. V. Bochkov

2014-07-01

Full Text Available The urgency of thermoelectric energy conversion is proved. Perspectives of nanostructures usage as thermoelectric materials are shown. The authors have systematized and generalized the methods and investigation results of bulk nanostructure thermoelectrics based on Bi-Sb-Te solid solutions. Ways of nanoparticles fabrication and their subsequent sintering into a bulk sample, results of structure study of the received materials are shown by methods of electronic microscopy and X-ray spectroscopy, results of mechanical properties investigation. Methods of manufacturing suggested with the authors’ participation and properties of thermoelectric nanocomposites, fabricated with addition of fullerene, thermally split graphite, graphene and molybdenum disulphide are discussed. Methods for prevention of recrystallization, measurement methods of thermoelectric properties of studied nanothermoelectrics are considered, including electric and thermal conductivities, thermoemf and the figure of merit. Factors that influence on thermoelectric figure of merit, including the tunneling of carriers through interfaces between nanograins, the additional phonon scattering on nanograin borders and the energy filtration of carriers through barriers have been theoretically investigated. Mechanisms and ways for improvement of the figure of merit are determined. Experimental confirmation for thermoelectric figure of merit increase is received. Physical mechanisms of thermoelectric figure of merit increase are shown by perceptivity of nanostructures utilization. The growth of thermoelectric figure of merit means an expansion of areas for rational application of thermoelectric energy generation and thermoelectric cooling.

Ground truth data collection on mining industrial explosions registered by the International Monitoring System

International Nuclear Information System (INIS)

Ehl'tekov, A.Yu.; Gordon, V.P.; Firsov, V.A.; Chervyakov, V.B.

2004-01-01

The presentation is dedicated to organizational and technical issues connected with the task of Comprehensive Test-Ban-Treaty Organization timely notification on large chemical explosions including data on explosion location and time, on applied explosive substance quantity and type, and also on configuration and assumed purpose of explosion. Explosions registered by International Monitoring System are of special interest. Their data could be used for calibration of the monitoring system. Ground truth data collection and some explosions location results on Russia's mining enterprises were given. Ground truth data collection peculiarities according to mining industrial explosions were considered. (author)

Mining dictionary: underground mining; open-cast mining; preparation and beneficiation; geology of mineral deposits

Energy Technology Data Exchange (ETDEWEB)

Goergen, H; Stoll, R D; Vriesen, R D; Welzenberg, B

1981-01-01

The dictionary reflects the latest technical developments in the vocabulary of mining methods and the mining industry. Volume I of the dictionary is English to German, Volume II German to English. 36,000 entries are included.

Systems analysis on the humanization of industrial life in the coal mining industry. Pt. 2. Results. Systemanalyse zur Humanisierung des Arbeitslebens im Steinkohlenbergbau. T. 2. Ergebnisse

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

Volume No. 8 of the series of papers quantifies the system of aims, i.e. it defines synthetic data of laws and regulations of mining of DIN standards, and VDI guidelines, of generally accepted rules of engineering as well as of certified findings of industrial science as minimum requirements. This definition is followed by the examination of the type of medium-term development to be expected in the bituminous coal mining industry of the Ruhrkohle AG up to the year 1985. Then the general aims 1 and 2 given in volume No. 7 are described in detail. These descriptions constitute an excellent summary of the present state of knowledge concerning the improvement of working conditions in the bituminous coal mining industry. Finally, a study on the transferability of research findings is given. One statement is of special importance, i.e., that transferability is not characterized by technological feasibility alone which depends to a high degree on marginal, organizational conditions within the company, e.g., on the information system, on its hierarchical structure, on the company's policy, and on departamental policy. In this study, only the technological transferability is examined. To enable us to assess it, appropriate statements are made in a brief description of the research project carried out since 1974, which was sponsored within the action programme ''Humanization of Industrial Life''.

A case in support of implementing innovative bio-processes in the metal mining industry

NARCIS (Netherlands)

Sanchez Andrea, I.; Stams, A.J.M.; Weijma, J.; Gonzalez Contreras, P.A.; Dijkman, H.; Rozendal, R.A.; Johnson, D.B.

2016-01-01

The metal mining industry faces many large challenges in future years, among which is the increasing need to process low-grade ores as accessible higher grade ores become depleted. This is against a backdrop of increasing global demands for base and precious metals, and rare earth elements.

Mastering Foreign Language Competence of Ecology and Environment Managers for Mining Industry of Kuzbass

Science.gov (United States)

Greenwald, Oksana; Islamov, Roman; Sergeychick, Tatyana

2017-11-01

The necessity to solve nature conservation problems of Kuzbass mining industry demands from postgraduate education institutions to train highly qualified specialists in ecology and environment management. As 21st century education is competence-based one, the article clarifies the concept of competence in education, focuses on key competences, namely foreign language competence and its relevance for specialists in ecology and environment management. Foreign language competence is acquired through the course of "Foreign Language" discipline which covers the following aspects: academic reading, academic writing and public speaking. The article also describes the experience of organizing students' individual work taking into account their motivation and specific conditions of the discipline as well. Thus, both the content of the discipline and the approach to organize students' learning contribute to mastering foreign language competence of ecology and environment managers as inherent condition of their professional efficiency for solving ecological problems of mining industry in Kuzbass region.

Pollution minimisation practices in the Australian mining and mineral processing industries

Energy Technology Data Exchange (ETDEWEB)

Catherine Driussi; Janis Jansz [Edith Cowan University, Joondalup, WA (Australia)

2006-07-01

Research was conducted to identify some of the current pollution minimisation practices adopted in Australia's mining and mineral processing industries. Initially, 84 mining and mineral processing companies were approached for inclusion in the study, with request only made for information that was available to the company stakeholders and the wider general community. Among the responses received, BHP Billiton, BlueScope Steel, Newmont Australia Limited and AngloGold Australia provided the information requested and/or a substantial quantity of information through reports on their company website. Analysis of the data collected for these companies indicated that improvements were made, and that policies had been implemented over the previous few years. The pollution minimisation and policy practices adopted at the operations of these companies include environmental management systems, advanced pollution control technologies, environmental awareness training for employees, and requirement - from company stakeholders - for increased accountability of environmental impacts.

Nanostructured Thermoelectric Oxides for Energy Harvesting Applications

KAUST Repository

Abutaha, Anas I.

2015-01-01

of thermoelectrics are still limited to one materials system, namely SiGe, since the traditional thermoelectric materials degrade and oxidize at high temperature. Therefore, oxide thermoelectrics emerge as a promising class of materials since they can operate

Data Mining Mining Data: MSHA Enforcement Efforts, Underground Coal Mine Safety, and New Health Implications

OpenAIRE

Kniesner, Thomas J.; Leeth, John D.

2003-01-01

Studies of industrial safety regulations, OSHA in particular, often find little effect on worker safety. Critics of the regulatory approach argue that safety standards have little to do with industrial injuries, and defenders of the regulatory approach cite infrequent inspections and low penalties for violating safety standards. We use recently assembled data from the Mine Safety and Health Administration (MSHA) concerning underground coal mine production, safety regulatory activities, and wo...

Organisation of work safety in the mining industry; Sicherheitsorganisation im Bergbau

Energy Technology Data Exchange (ETDEWEB)

Didier, V. [Bergbau-Berufsgenossenschaft, Bochum (Germany). Referat Unfallverhuetung

1999-10-07

The paper summarizes the main findings of a scientific study. Accident figures for the German mining industry indicate that, in comparison with other industries, there is still plenty of scope for increased prevention. However, the rapid development of safety technology alone is still yielding diminishing returns. The main route to increased safety in the mining industry is by way of improved safety management. Various methods are available for analyzing the efficiency of work-safety structures and procedures. Models for the classification of safety-relevant tasks are based on the legally appropriate and organisationally expedient allocation of responsibilities between management and safety experts. An important management tool in this respect is the hazard analysis procedure laid down in the European Union's Health and Safety at Work Act. Practical studies are used to illustrate that safety results can be improved through reorganisation without increasing prime costs. (orig.) [German] Der Beitrag fasst die wesentlichen Ergebnisse einer wissenschaftlichen Studie zusammen: Die Unfallentwicklung im deutschen Bergbau zeigt im Vergleich zu anderen Industriezweigen noch deutliche Reserven fuer die Praevention. Die Fortentwicklung der Sicherheitstechnik fuer sich allein liefert aber nur noch abnehmende Grenzertraege. Eine Strategie technischer und organisatorischer Einzeldirektiven reicht ebenfalls nicht aus. Der Weg zu besseren Sicherheitsresultaten im Bergbau fuehrt vor allem ueber optimierte Ablaeufe des Sicherheitsmanagements. Mit verschiedenen Methoden lassen sich Aufbau- und Ablauforganisation der Arbeitssicherheit auf ihre Effizienz untersuchen. Aus der juristisch implizierten und organisatorisch zweckmaessigen Aufgabenteilung zwischen Fuehrungskraeften und Sicherheitsexperten ergeben sich Zurodnungsmuster fuer sicherheitsrelevante Aufgaben. Ein wichtiges Fuehrungsinstrument sind Gefaehrdungsanalysen nach dem Arbeitsschutzrecht der Europaeischen Union. Anhand

Using high thermal stability flexible thin film thermoelectric generator at moderate temperature

Science.gov (United States)

Zheng, Zhuang-Hao; Luo, Jing-Ting; Chen, Tian-Bao; Zhang, Xiang-Hua; Liang, Guang-Xing; Fan, Ping

2018-04-01

Flexible thin film thermoelectric devices are extensively used in the microscale industry for powering wearable electronics. In this study, comprehensive optimization was conducted in materials and connection design for fabricating a high thermal stability flexible thin film thermoelectric generator. First, the thin films in the generator, including the electrodes, were prepared by magnetron sputtering deposition. The "NiCu-Cu-NiCu" multilayer electrode structure was applied to ensure the thermal stability of the device used at moderate temperature in an air atmosphere. A design with metal layer bonding and series accordant connection was then employed. The maximum efficiency of a single PN thermocouple generator is >11%, and the output power loss of the generator is <10% after integration.

Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry

Science.gov (United States)

Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T. V.

1974-01-01

The author has identified the following significant results. The mine refuse inventory maps were prepared in response to a need by both the State and the coal industry. The lack of information on the scope of the problem handicapped all people concerned in drafting realistic legislation for a severance tax on coal production to raise funds for restoration of refuse sites. The inventory was conducted rapidly and economically, and demonstrated the benefits which can be derived through remote sensing methods.

Thermoelectric-figure-of-merit enhancement of silicon-germanium through nanocomposite concept

Science.gov (United States)

Wang, Dezhi

SiGe alloy has been the thermoelectric material element of RTGs (Radioisotope thermoelectric power generators) for more than 20 years because of its good performance at high temperature. It also has a very high potential application in converting exhaust heat into useful electricity, which currently attracts a lot of research interest in the automotive industry where 40% of the energy was rejected as exhaust heat. However, its low conversion efficiency (8%) is a major concern although it is the best in practice. A new concept, namely Si-Ge nanocomposite, was proposed to enhance thermoelectric figure-of-merit. Fast heating pressure sintering was found to be an appropriate synthesizing method and a lab-made direct current-induced hot press system was established. It can reach l200°C within several minutes and many parameters can be controlled. The uniquely designed graphite die assembly can stand l60MPa pressure which is better than the best commercial products (127MPa). Numerous Si-Ge nanocomposite samples were pressed using our DC hot press. Fully dense n-type Si-Ge nanocomposite samples of nanoSi80nanoGe20P were finally obtained. The nanocomposite structure was characterized via XRD, SEM, EDS, and TEM. The proposed nanocomposite structure, dots in a matrix, was observed. Most importantly, the thermoelectric property measurements showed that the Si-Ge nanocomposite of n-type nanoSi80nanoGe20 possessed higher electrical conductivity but lower thermal conductivity, thus a higher ZT than that of n-type nanoSi80microGe20. This result proved that thermoelectric-figure-of-merit enhancement through the nanocomposite concept was the right direction.

Exclusion, exemption and clearance in the mining and minerals industry: Practical application to South African operations

International Nuclear Information System (INIS)

Wymer, D.G.

1997-01-01

Although South Africa has no primary uranium mines, a major portion of its very large mining industry involves minerals with moderately elevated levels of naturally-occurring radionuclides, typical of elevated levels found in similar mineral deposits worldwide. Evidence both locally and internationally suggests that, where radioactive elements are not concentrated or extracted, such operations cannot normally give rise to undue radiological risks. The concept of exclusion should therefore play the major role in establishing which minerals-related operations should be subject to regulatory control, but exclusion criteria, which tend to be numerical rather than descriptive, vary widely between countries - in South Africa, very little is excluded and opportunities for granting exemptions are limited. The need for exemptions and clearance would be reduced if more extensive use of the exclusion concept were made, but it is nevertheless important to have better guidance on determining appropriate numerical exemption and clearance criteria - again, there are currently wide variations between countries, one example being the surface activity clearance levels for the reuse or recycling of uranium-contaminated items. Two examples, relating to gold mining tailings disposal and recycling of contaminated scrap steel respectively, are used to illustrate the difficulties that have arisen in South Africa on the clearance of low activity materials from the mining and minerals industry. Radon is identified as requiring separate consideration, and is the one area where more specific international guidance, based on action levels for intervention, is available. The action level for workplaces recommended by the IAEA would appear to represent a common basis for exclusion and exemption with respect to radon exposures from mining and minerals operations. For public exposures, the corresponding action level for homes, although not specifically intended for dealing with radon from nearby

Recent developments in Australia's uranium mining industry

International Nuclear Information System (INIS)

McKay, A.D.

2001-01-01

Uranium is produced at two mining/milling operations in Australia - Ranger in the Alligator Rivers Region of the Northern Territory, and Olympic Dam in South Australia. In 1996, Ranger produced 4138 tonnes (t) U 3 O 8 from stockpiled ore mined from Ranger No. 1 Orebody. The capacity of the Ranger mill is being expanded to 5000 tonnes per annum (tpa) U 3 O 8 to coincide with the commencement of mining from No. 3 Orebody in mid-1997. The Olympic Dam copper-uranium-gold-silver deposit is the world's largest deposit of low cost uranium. The operation currently has an annual production of 85,000 t copper, 1700 t U 3 O 8 and associated gold and silver. WMC Ltd proposes to expand annual production to 200 000 t copper and approximately 4600 t U 3 O 8 by end of 1999. The environmental impact of the expansion is being assessed jointly by both Commonwealth and South Australian Governments. A draft Environmental Impact Statement (EIS) was released in May. Since its election in March 1996, the Liberal/National Party Coalition Government has made a number of changes to the Commonwealth Government's policies relating to uranium mining, including removal of the former Government's 'three mines' policy, and relaxation of the guidelines for foreign investment in Australian uranium mines. These changes, together with an improved outlook for the uranium market, have resulted in proposals to develop new mines at Jabiluka (Northern Territory), Kintyre (Western Australia) and Beverley (South Australia). Energy Resources of Australia Ltd proposes to develop an underground mine at Jabiluka with the ore to be processed at Ranger mill. Initial production will be 1800 tpa U 3 O 8 which will increase to 4000 tpa U 3 O 8 by the 14th year. The draft EIS was released for public comment in October 1996, and the final EIS is to be released in June 1997. Canning Resources Ltd proposes to mine the Kintyre deposit by open cut methods commencing in 1999 with an annual production of 1200 tpa U 3 O 8

Simultaneous power generation and heat recovery using a heat pipe assisted thermoelectric generator system

International Nuclear Information System (INIS)

Remeli, Muhammad Fairuz; Tan, Lippong; Date, Abhijit; Singh, Baljit; Akbarzadeh, Aliakbar

2015-01-01

Highlights: • A new passive power cogeneration system using industrial waste heat was introduced. • Heat pipes and thermoelectrics were used for recovering waste heat and electricity. • Theoretical model predicted the 2 kW test rig could recover 1.345 kW thermal power. • 10.39 W electrical power was produced equivalent to 0.77% conversion efficiency. - Abstract: This research explores a new method of recovering waste heat and electricity using a combination of heat pipes and thermoelectric generators (HP-TEG). The HP-TEG system consists of Bismuth Telluride (Bi 2 Te 3 ) based thermoelectric generators (TEGs), which are sandwiched between two finned heat pipes to achieve a temperature gradient across the TEG for thermoelectricity generation. A theoretical model was developed to predict the waste heat recovery and electricity conversion performances of the HP-TEG system under different parametric conditions. The modelling results show that the HP-TEG system has the capability of recovering 1.345 kW of waste heat and generating 10.39 W of electrical power using 8 installed TEGs. An experimental test bench for the HP-TEG system is under development and will be discussed in this paper

Thermoelectric Energy Conversion: Materials, Devices, and Systems

International Nuclear Information System (INIS)

Chen, Gang

2015-01-01

This paper will present a discussion of challenges, progresses, and opportunities in thermoelectric energy conversion technology. We will start with an introduction to thermoelectric technology, followed by discussing advances in thermoelectric materials, devices, and systems. Thermoelectric energy conversion exploits the Seebeck effect to convert thermal energy into electricity, or the Peltier effect for heat pumping applications. Thermoelectric devices are scalable, capable of generating power from nano Watts to mega Watts. One key issue is to improve materials thermoelectric figure- of-merit that is linearly proportional to the Seebeck coefficient, the square of the electrical conductivity, and inversely proportional to the thermal conductivity. Improving the figure-of-merit requires good understanding of electron and phonon transport as their properties are often contradictory in trends. Over the past decade, excellent progresses have been made in the understanding of electron and phonon transport in thermoelectric materials, and in improving existing and identify new materials, especially by exploring nanoscale size effects. Taking materials to real world applications, however, faces more challenges in terms of materials stability, device fabrication, thermal management and system design. Progresses and lessons learnt from our effort in fabricating thermoelectric devices will be discussed. We have demonstrated device thermal-to-electrical energy conversion efficiency ∼10% and solar-thermoelectric generator efficiency at 4.6% without optical concentration of sunlight (Figure 1) and ∼8-9% efficiency with optical concentration. Great opportunities exist in advancing materials as well as in using existing materials for energy efficiency improvements and renewable energy utilization, as well as mobile applications. (paper)

Coastal mining

Science.gov (United States)

Bell, Peter M.

The Exclusive Economic Zone (EEZ) declared by President Reagan in March 1983 has met with a mixed response from those who would benefit from a guaranteed, 200-nautical-mile (370-km) protected underwater mining zone off the coasts of the United States and its possessions. On the one hand, the U.S. Department of the Interior is looking ahead and has been very successful in safeguarding important natural resources that will be needed in the coming decades. On the other hand, the mining industry is faced with a depressed metals and mining market.A report of the Exclusive Economic Zone Symposium held in November 1983 by the U.S. Geological Survey, the Mineral Management Service, and the Bureau of Mines described the mixed response as: “ … The Department of Interior … raring to go into promotion of deep-seal mining but industrial consortia being very pessimistic about the program, at least for the next 30 or so years.” (Chemical & Engineering News, February 5, 1983).

An Information Framework for Facilitating Cost Saving of Environmental Impacts in the Coal Mining Industry in South Africa

Directory of Open Access Journals (Sweden)

Mashudu D. Mbedzi

2018-05-01

Full Text Available Coal-mining contributes much to the economic welfare of a country. Yet it brings along a number of challenges, notably environmental impacts which include water pollution in a water scarce country such as South Africa. This research is conducted in two phases. The first phase intends to establish environmental and other challenges brought about by the coal-mining industry through a comprehensive analysis of available literature. Combatting these challenges is costly; consequently, our work investigates how established management accounting tools and techniques such as Environmental Management Accounting (EMA, Material Flow Cost Accounting (MFCA and Life Cycle Costing (LCC may facilitate cost savings for the companies involved. These techniques promote increased transparency of material usage by tracing and quantifying the flows and inventories of materials within the coal-mining industry in physical and monetary terms, hence hidden costs are elicited. The researchers postulate that an Information Framework integrating these aspects may be the way forward. To this end existing frameworks in the literature are identified. A number of research questions embodying the above aspects are defined and the objective is to define a conceptual framework to facilitate cost savings for coal-mining companies. The main contribution of this work is an information framework presented towards the end of this article. The second phase of the research will involve fieldwork in the form of a survey among stakeholders in industry to validate the conceptual framework.

Role of behavioural factors in green supply chain management implementation in Indian mining industries

DEFF Research Database (Denmark)

Muduli, K.; Govindan, Kannan; Barve, A.

2013-01-01

Green supply chain management (GSCM) integrates ecological concepts with those of supply chain management in order to minimize energy and material usage and to reduce adverse impacts of supply chain activities on the environment. GSCM implementation in mining industries depends largely upon certain...... be taken as a reference by the decision makers while deciding the hierarchy of action necessary for effective implementation of green practices in mining supply chains. The present research attempts to explore various behavioural factors affecting GCSM practices and their interactions which help to attain...... green-enabled needs. Interpretive structural modelling (ISM) is employed in this research to extract the interrelationships among the identified behavioural factors....

Kiruna research mine

Energy Technology Data Exchange (ETDEWEB)

Oestensen, A

1983-12-01

The research mine at Kiruna is the first large-scale mining research project sponsored by the Swedish government. Under the leadership of the Swedish Mining Research Foundation, a five-year project involving development of new mining systems and machinery will be carried out in cooperation with the Lulea Institute of Technology and a number of Swedish industrial companies.

Data Mining Mining Data: MSHA Enforcement Efforts, Underground Coal Mine Safety, and New Health Policy Implications

OpenAIRE

Thomas J. Kniesner; John D. Leeth

2003-01-01

Studies of industrial safety regulations, Occupational Safety and Health Administration (OSHA) in particular, often find little effect on worker safety. Critics of the regulatory approach argue that safety standards have little to do with industrial injuries and defenders of the regulatory approach cite infrequent inspections and low fines for violating safety standards. We use recently assembled data from the Mine Safety and Health Administration (MSHA) concerning underground coal mine produ...

INFLUENCE OF MINING AND METAL INDUSTRY ON PHYSCIA LICHENS

Directory of Open Access Journals (Sweden)

Kachinskaya V.V.

2015-04-01

Full Text Available The comparative analysis of lichens Physcia. Рopulation at different levels of aerotechnogenic pollution of industrial mining – metallurgical complex of Krivyi Rig Basin. In the highway area there was found the worsening living conditions of thallus at the lichens Physcia, manifested in the reduction of a projective cover and reducing of the size of thallus with the increasing of the degree of their damage. It is set that specific composition and conformities to law of distribution of cladinas is determined the type of the industrial loading. Predominance at the lichens of crustaceous cladinas, insignificant participation of fissile cladinas and complete absence of bushy forms is the possible consequence of industrial influence. We registered some 3 species of epiphytic lichens, namely Phaeophyscia nigricans, Physcia tenella, Physcia adscendens in a residential zone, while on conditional control area we found Physcia orbicularis. The dominant species was scum-like shape Phaeophyscia nigricans, Physcia adscendens, Physcia tenella, while on conditional control region we marked predominance of Physcia orbicularis and did not registered bushy lichens form. We also divided the lichens into two groups according to the resistance towards air pollution - moderate (2 species, Phaeophyscia nigricans, Physcia tenella and toxic-resistant (2 species, Physcia orbicularis, Physcia adscendens. Epiphytic lichens in terms of residential areas compared to conventionally control area characterized by a decrease of morphometric parameters of the melt. Key results can be used to predict the state of ecosystems using lichenoindication in terms of industrial regions of Ukraine.

Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

Science.gov (United States)

Kittipongvises, Suthirat

2015-12-01

There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs) emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e) per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM) projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding) generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2) is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR), vertical roller mills (VRM), gravity pre-concentration and microwave heating technologies) that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and practice were

Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

Directory of Open Access Journals (Sweden)

Kittipongvises Suthirat

2015-12-01

Full Text Available There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2 is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR, vertical roller mills (VRM, gravity pre-concentration and microwave heating technologies that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and

Microcontroller based, ore grade measuring portable instruments for uranium mining industry

International Nuclear Information System (INIS)

Dheeraj Reddy, J.; Narender Reddy, J.

2004-01-01

Ore Face Scanning and Bore Hole Logging are important essential activities which are required to be carried out in any Uranium mining industry. Microcontroller based, portable instruments with built-in powerful embedded code for data acquisition (of Radiation counts) and Ore Grade calculations will become a handy measuring tool for miners. Nucleonix Systems has recently developed and made these two portable instruments available to UCIL, which are under use at Jaduguda and Narvapahar mines. Some of the important features of these systems are compact, light weight, portable, hand held, battery powered. Modes of Data Acquisition: CPS, CPM and ORE GRADE. Detector: Sensitive GM Tube. Choice of Adj. TC (Time Constant) in 'ORE GRADE', acquisition mode. Built-in automatic BG (Background) recording and subtraction provided to indicate net CPS, CPM or ore GRADE in PPM. Can store 1000 readings at users choice. Built-in RS232 serial port facilitates data downloading into PC. This paper focuses on design concepts and technical details for the above two products. (author)

Radiation protection in uranium mining and milling industry

International Nuclear Information System (INIS)

Raghavayya, M.

2005-01-01

The first phase of the Nuclear Fuel Cycle is exploration for uranium and the next is mining and milling of uranium ore. This phase is mostly characterised by low levels of radioactivity and radiation exposure of the workers involved. Yet it is a paradoxical truth that incidence of cancer among the work force, especially miners, due to occupational radiation exposure (from radon and decay products) has been proved only in uranium mines in the entire Nuclear Fuel Cycle. Of course such incidence occurred before the detrimental effect of radiation exposure was realised and understood. Therefore it is important to familiarise oneself with the radiation hazards prevalent in the uranium mining and milling facilities so as to take appropriate remedial measures for the protection of not only the workers but also the public at large. There are both open cast and underground uranium mines around the world. Radiation hazards are considerably less significant in open cast mines than in underground mines unless the ore grade is very high. By default therefore the discussion which ensues relates mainly to radiation hazards in underground uranium mines and associated milling operations. The discussion gives a brief outline of typical uranium mine and mining and milling operations. This is followed by a description of the radiation hazards therein and protection measures that are to be taken to minimise radiation exposure. (author)

A Review of Mine Rescue Ensembles for Underground Coal Mining in the United States.

Science.gov (United States)

Kilinc, F Selcen; Monaghan, William D; Powell, Jeffrey B

The mining industry is among the top ten industries nationwide with high occupational injury and fatality rates, and mine rescue response may be considered one of the most hazardous activities in mining operations. In the aftermath of an underground mine fire, explosion or water inundation, specially equipped and trained teams have been sent underground to fight fires, rescue entrapped miners, test atmospheric conditions, investigate the causes of the disaster, or recover the dead. Special personal protective ensembles are used by the team members to improve the protection of rescuers against the hazards of mine rescue and recovery. Personal protective ensembles used by mine rescue teams consist of helmet, cap lamp, hood, gloves, protective clothing, boots, kneepads, facemask, breathing apparatus, belt, and suspenders. While improved technology such as wireless warning and communication systems, lifeline pulleys, and lighted vests have been developed for mine rescuers over the last 100 years, recent research in this area of personal protective ensembles has been minimal due to the trending of reduced exposure of rescue workers. In recent years, the exposure of mine rescue teams to hazardous situations has been changing. However, it is vital that members of the teams have the capability and proper protection to immediately respond to a wide range of hazardous situations. Currently, there are no minimum requirements, best practice documents, or nationally recognized consensus standards for protective clothing used by mine rescue teams in the United States (U.S.). The following review provides a summary of potential issues that can be addressed by rescue teams and industry to improve potential exposures to rescue team members should a disaster situation occur. However, the continued trending in the mining industry toward non-exposure to potential hazards for rescue workers should continue to be the primary goal. To assist in continuing this trend, the mining industry

Solid-liquid separation in the mining industry

CERN Document Server

Concha A , Fernando

2014-01-01

This book covers virtually all of the engineering science and technological aspects of separating water from particulate solids in the mining industry. It starts with an introduction to the field of mineral processing and the importance of water in mineral concentrators. The consumption of water in the various stages of concentration is discussed, as is the necessity of recovering the majority of that water for recycling. The book presents the fundamentals under which processes of solid-liquid separation are studied, approaching mixtures of discrete finely divided solid particles in water as a basis for dealing with sedimentation in particulate systems. Suspensions, treated as continuous media, provide the basis of sedimentation, flows through porous media and filtration. The book also considers particle aggregations, and thickening is analyzed in depth. Lastly, two chapters cover the fundamentals and application of rheology and the transport of suspensions.  This work is suitable for researchers and profess...

Experimental study of a sustainable hybrid system for thermoelectric generation and freshwater production

Science.gov (United States)

de Souza, Gabriel Fernandes; Tan, Lippong; Singh, Baljit; Ding, Lai Chet; Date, Abhijit

2017-04-01

The paper presents a sustainable hybrid system, which is capable of generating electricity and producing freshwater from seawater using low grade heat source. This proposed system uses low grade heat that can be supplied from solar radiation, industrial waste heat or any other waste heat sources where the temperature is less than 150°C. The concept behind this system uses the Seebeck effect for thermoelectricity generation via incorporating the low boiling point of seawater under sub-atmospheric ambient pressure. A lab-test prototype of the proposed system was built and experimentally tested in RMIT University. The prototype utilised four commercial available thermoelectric generators (Bi2Te3) and a vacuum vessel to achieve the simultaneous production of electricity and freshwater. The temperature profiles, thermoelectric powers and freshwater productions were determined at several levels of salinity to study the influence of different salt concentrations. The theoretical description of system design and experimental results were analysed and discussed in detailed. The experiment results showed that 0.75W of thermoelectricity and 404g of freshwater were produced using inputs of 150W of simulated waste heat and 500g of 3% saline water. The proposed hybrid concept has demonstrated the potential to become the future sustainable system for electricity and freshwater productions.

Managerial Accounting Principles and Cost Calculation Used by Economic Entities in the Coal Mining Industry

OpenAIRE

Boca (Rakos) Ileana – Sorina; Vatasoiu Cristian Ionel

2011-01-01

Considering the specialized work in managerial accounting, this paper aims to show which cost calculation principles are actually applied in the coal mining industry today. The methodology used in this scientific approach is of qualitative nature, using the following methods: direct observation and interview.

The South African coal mining industry: A need for a more efficient and collaborative supply chain

Directory of Open Access Journals (Sweden)

David Pooe

2011-11-01

Full Text Available It is estimated that about two-thirds of global coal is used for power generation and that, in the next 20 years, over 70% of the demand for coal will come from China and India. Coal accounts for approximately 41% of the world's electricity generation. Demand for thermal coal is influenced by factors that include availability, prices of competing products such as oil, gas and nuclear power, and the demand for electricity. The aim of this article is to provide an exposition of supply chain dynamics within the South African coal mining industry and to argue for a more efficient and collaborative supply chain. The authors attempt to investigate at local and global level, the current trends pertaining to the level of reserves, production and consumption of coal. The article further demonstrates the shortcomings of current logistics in meeting the demand for coal in both domestic and export markets. The article draws from secondary data sourced from academic papers, government and agency documents in the exposition of the coal mining supply chain. The paper concludes by recommending the need for a scientific study on supply chain constraints facing the coal mining industry in South Africa.

Case studies of sealing methods and materials used in the salt and potash mining industries

International Nuclear Information System (INIS)

Eyermann, T.J.; Sambeek, L.L. Van; Hansen, F.D.

1995-11-01

Sealing methods and materials currently used in salt and potash industries were surveyed to determine if systems analogous to the shaft seal design proposed for the Waste Isolation Pilot Plant (WIPP) exist. Emphasis was first given to concrete and then expanded to include other materials. Representative case studies could provide useful design, construction, and performance information for development of the WIPP shaft seal system design. This report contains a summary of engineering and construction details of various sealing methods used by mining industries for bulkheads and shaft liners. Industrial experience, as determined from site visits and literature reviews, provides few examples of bulkheads built in salt and potash mines for control of water. Sealing experiences representing site-specific conditions often have little engineering design to back up the methods employed and even less quantitative evaluation of seal performance. Cases examined include successes and failures, and both contribute to a database of experiences. Mass salt-saturated concrete placement under ground was accomplished under several varied conditions. Information derived from this database has been used to assess the performance of concrete as a seal material. Concrete appears to be a robust material with successes in several case studies. 42 refs

Case studies of sealing methods and materials used in the salt and potash mining industries

Energy Technology Data Exchange (ETDEWEB)

Eyermann, T.J.; Sambeek, L.L. Van [RE/SPEC Inc., Rapid City, SD (United States); Hansen, F.D. [Sandia National Labs., Albuquerque, NM (United States). Repository Isolation Systems Dept.

1995-11-01

Sealing methods and materials currently used in salt and potash industries were surveyed to determine if systems analogous to the shaft seal design proposed for the Waste Isolation Pilot Plant (WIPP) exist. Emphasis was first given to concrete and then expanded to include other materials. Representative case studies could provide useful design, construction, and performance information for development of the WIPP shaft seal system design. This report contains a summary of engineering and construction details of various sealing methods used by mining industries for bulkheads and shaft liners. Industrial experience, as determined from site visits and literature reviews, provides few examples of bulkheads built in salt and potash mines for control of water. Sealing experiences representing site-specific conditions often have little engineering design to back up the methods employed and even less quantitative evaluation of seal performance. Cases examined include successes and failures, and both contribute to a database of experiences. Mass salt-saturated concrete placement under ground was accomplished under several varied conditions. Information derived from this database has been used to assess the performance of concrete as a seal material. Concrete appears to be a robust material with successes in several case studies. 42 refs.

Mining in the Federal Republic of Germany 2012. Mining industries and statistics. 64th year 2013. Documentation; Der Bergbau in der Bundesrepublik Deutschland 2012. Bergwirtschaft und Statistik. 64. Jahrgang 2013. Dokumentation

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-11-15

The annual report of the series ''The mining industry in the Federal Republic of Germany - Mountain Economics and Statistics'' is published by the Federal Ministry of Economics and Technology in cooperation with the mining authorities of the federal states. It contains comprehensive data of all production facilities of mining industry in Germany and describes the position of the German industry in the context of the overall economic development. The report shows an interest in local raw materials as well as on the international raw materials economy. Moreover, the present publication provides a detailed statistics section. [German] Der Jahresbericht in der Reihe ''Der Bergbau in der Bundesrepublik Deutschland - Bergwirtschaft und Statistik'' wird vom Bundesministerium fuer Wirtschaft und Technologie in Zusammenarbeit mit den Bergbehoerden der Bundeslaender herausgegeben. Er enthaelt umfassende Daten aller Produktionsbetriebe des Bergbaus in Deutschland und beschreibt die Lage des deutschen Bergbaus im Zusammenhang mit der gesamtwirtschaftlichen Entwicklung. Der Bericht geht sowohl auf heimische Rohstoffe als auch auf die internationale Rohstoffwirtschaft ein. Darueber hinaus liefert die vorliegende Publikation einen ausfuehrlichen Statistikteil.

Spin thermoelectric effects in organic single-molecule devices

Energy Technology Data Exchange (ETDEWEB)

Wang, H.L.; Wang, M.X.; Qian, C.; Hong, X.K.; Zhang, D.B.; Liu, Y.S.; Yang, X.F., E-mail: xfyang@cslg.edu.cn

2017-05-25

Highlights: • A stronger spin thermoelectric performance in a polyacetylene device is observed. • For the antiferromagnetic (AFM) ordering, a transport gap is opened. Thus the thermoelectric effects are largely enhanced. - Abstract: The spin thermoelectric performance of a polyacetylene chain bridging two zigzag graphene nanoribbons (ZGNRs) is investigated based on first principles method. Two different edge spin arrangements in ZGNRs are considered. For ferromagnetic (FM) ordering, transmission eigenstates with different spin indices distributed below and above Fermi level are observed, leading directly to a strong spin thermoelectric effect in a wide temperature range. With the edge spins arranged in the antiferromagnetic (AFM) ordering, an obvious transport gap appears in the system, which greatly enhances the thermoelectric effects. The presence of a small spin splitting also induces a spin thermoelectric effect greater than the charge thermoelectric effect in certain temperature range. In general, the single-molecule junction exhibits the potential to be used for the design of perfect thermospin devices.

Uranium mines of Tajikistan

International Nuclear Information System (INIS)

Razykov, Z.A; Gusakov, E.G.; Marushenko, A.A.; Botov, A.Yu.; Yunusov, M.M.

2002-12-01

The book describes location laws, the main properties of geological structure and industrial perspectives for known uranium mines of the Republic of Tajikistan. Used methods of industrial processing of uranium mines are described. The results of investigations of technological properties of main types of uranium ores and methods of industrial processing of some of them are shown. Main properties of uranium are shortly described as well as problems, connected with it, which arise during exploitation, mining and processing of uranium ores. The main methods of solution of these problems are shown. The book has interest for specialists of mining, geological, chemical, and technological fields as well as for students of appropriate universities. This book will be interested for usual reader, too, if they are interested in mineral resources of their country [ru

Lean Maintenance Applied to Improve Maintenance Efficiency in Thermoelectric Power Plants

Directory of Open Access Journals (Sweden)

Orlando Duran

2017-10-01

Full Text Available Thermoelectric power plants consist of a set of critical equipment that require high levels of availability and reliability. Due to this, maintenance of these physical assets is gaining momentum in industry. Maintenance is considered as an activity that contributes to improving the availability, efficiency and productivity of each piece of equipment. Several techniques have been used to achieve greater efficiencies in maintenance, among which we can find the lean maintenance philosophy. Despite the wide diffusion of lean maintenance, there is no structured method that supports the prescription of lean tools applied to the maintenance function. This paper presents the experience gathered in two lean maintenance projects in thermoelectric power plants. The application of lean techniques was based on using a previously developed multicriterial decision making process that uses the Fuzzy Analytic Hierarchy Process (AHP methodology to carry out a diagnosis and prescription tasks. That methodology allowed the prescription of the appropriated lean techniques to resolve the main deficiencies in maintenance function. The results of applying such lean tools show that important results can be obtained, making the maintenance function in thermoelectric power plants more efficient and lean.

Behaviour of U-Isotopes in an Estuary Affected by Acid Mine Drainage and Industrial Releases

International Nuclear Information System (INIS)

Hierro, A.; Bolivar, J.P.; Vaca, F.

2011-01-01

Tinto and Odiel rivers (SW of Spain) is an ecosystem of great interest that is seriously affected by acid mine drainage (AMD) from long-term mining activities (pH < 3). Additionally, a large industrial complex is located in the surroundings of this estuary and Huelva town, which includes two phosphate rock processing plants that produce about 3 millions of tons per year of a byproduct called phosphogypsum (PG) containing high U-series radionuclides concentrations. For these reasons, the estuary of Huelva is one of the most heavy metals and radionuclides polluted estuarine systems in Europe with extremely low pH.

Introduction to thermoelectricity

CERN Document Server

Goldsmid, H Julian

2016-01-01

This book is a comprehensive introduction to all aspects of thermoelectric energy conversion. It covers both theory and practice. The book is timely as it refers to the many improvements that have come about in the last few years through the use of nanostructures. The concept of semiconductor thermoelements led to major advances during the second half of the twentieth century, making Peltier refrigeration a widely used technique. The latest materials herald thermoelectric generation as the preferred technique for exploiting low-grade heat. The book shows how progress has been made by increasing the thermal resistivity of the lattice until it is almost as large as it is for glass. It points the way towards the attainment of similar improvements in the electronic parameters. It does not neglect practical considerations, such as the desirability of making thermocouples from inexpensive and environmentally acceptable materials. The second edition was extended to also include recent advances in thermoelectric ener...

Opto-thermoelectric nanotweezers

Science.gov (United States)

Lin, Linhan; Wang, Mingsong; Peng, Xiaolei; Lissek, Emanuel N.; Mao, Zhangming; Scarabelli, Leonardo; Adkins, Emily; Coskun, Sahin; Unalan, Husnu Emrah; Korgel, Brian A.; Liz-Marzán, Luis M.; Florin, Ernst-Ludwig; Zheng, Yuebing

2018-04-01

Optical manipulation of plasmonic nanoparticles provides opportunities for fundamental and technical innovation in nanophotonics. Optical heating arising from the photon-to-phonon conversion is considered as an intrinsic loss in metal nanoparticles, which limits their applications. We show here that this drawback can be turned into an advantage, by developing an extremely low-power optical tweezing technique, termed opto-thermoelectric nanotweezers. By optically heating a thermoplasmonic substrate, a light-directed thermoelectric field can be generated due to spatial separation of dissolved ions within the heating laser spot, which allows us to manipulate metal nanoparticles of a wide range of materials, sizes and shapes with single-particle resolution. In combination with dark-field optical imaging, nanoparticles can be selectively trapped and their spectroscopic response can be resolved in situ. With its simple optics, versatile low-power operation, applicability to diverse nanoparticles and tunable working wavelength, opto-thermoelectric nanotweezers will become a powerful tool in colloid science and nanotechnology.

P-type Al-doped Cr-deficient CrN thin films for thermoelectrics

Science.gov (United States)

le Febvrier, Arnaud; Van Nong, Ngo; Abadias, Gregory; Eklund, Per

2018-05-01

Thermoelectric properties of chromium nitride (CrN)-based films grown on c-plane sapphire by dc reactive magnetron sputtering were investigated. In this work, aluminum doping was introduced in CrN (degenerate n-type semiconductor) by co-deposition. Under the present deposition conditions, over-stoichiometry in nitrogen (CrN1+δ) rock-salt structure is obtained. A p-type conduction is observed with nitrogen-rich CrN combined with aluminum doping. The Cr0.96Al0.04N1.17 film exhibited a high Seebeck coefficient and a sufficient power factor at 300 °C. These results are a starting point for designing p-type/n-type thermoelectric materials based on chromium nitride films, which are cheap and routinely grown on the industrial scale.

Modeling and Simulations on the Intramural Thermoelectric Generator of Lower-Re-fluid

Science.gov (United States)

Zhang, Zheng; Zheng, Ding; Chen, Yushan

The thermoelectric conversion with lower Renault number (Re) fluid, such as waste heat from industry boiler, and engine's circled cooling water, which can be designed as intramural generator structure. In this research, a thermoelectric project analysis model and the description of an intensified system are presented, its generator with the aligned or staggered platoon structure has strengthened heat-transfer property, and the heat convection coefficient ratio has increased times than plain tube; For the fluid kinetic energy's loss is influenced by the whirlpool, the pressure difference is several hundred Pa level which changes along with geometric parameters of transform components; what's more, heat transfer area increase distinctly under the same generator volume, which has built the foundation for the enhancement output electric power.

Environmental Conflicts in Mining, Quarrying and Metallurgical Industries in the Iberian Peninsula (19th and 20th Century): Pollution and Popular Protest

OpenAIRE

Guimarães, Paulo Eduardo

2014-01-01

ENVIRONMENTAL CONFLICTS IN MINING, QUARRYING, AND METALLURGICAL INDUSTRIES IN THE IBERIAN PENINSULA (19TH AND 20TH CENTURY): POLLUTION AND PUBLIC PROTEST. Paulo E. Guimarães, NICPRI / University of Évora (Portugal) J. D. Pérez Cebada, Universidad of Huelva (Spain) Comparative and transnational analyses of social conflicts, related to the environmental changes produced by modern and contemporary mining industries, have been a topic of growing academic interest for the last two decad...

Thermoelectric air-cooling module for electronic devices

International Nuclear Information System (INIS)

Chang, Yu-Wei; Chang, Chih-Chung; Ke, Ming-Tsun; Chen, Sih-Li

2009-01-01

This article investigates the thermoelectric air-cooling module for electronic devices. The effects of heat load of heater and input current to thermoelectric cooler are experimentally determined. A theoretical model of thermal analogy network is developed to predict the thermal performance of the thermoelectric air-cooling module. The result shows that the prediction by the model agrees with the experimental data. At a specific heat load, the thermoelectric air-cooling module reaches the best cooling performance at an optimum input current. In this study, the optimum input currents are from 6 A to 7 A at the heat loads from 20 W to 100 W. The result also demonstrates that the thermoelectric air-cooling module performs better performance at a lower heat load. The lowest total temperature difference-heat load ratio is experimentally estimated as -0.54 W K -1 at the low heat load of 20 W, while it is 0.664 W K -1 at the high heat load of 100 W. In some conditions, the thermoelectric air-cooling module performs worse than the air-cooling heat sink only. This article shows the effective operating range in which the cooling performance of the thermoelectric air-cooling module excels that of the air-cooling heat sink only.

Legacies of the uranium ore mining industry and their restoration. A survey of Africa, Asia and Australia; Hinterlassenschaften des Uranerzbergbaus und deren Sanierung. Ein Ueberblick ueber Afrika, Asien und Australien

Energy Technology Data Exchange (ETDEWEB)

Waggitt, P. [International Atomic Energy Agency (IAEA), Vienna (Austria). Waste and Environmental Safety Section; Lersow, M. [Deutsche Gesellschaft fuer Geotechnik (DGGT) e.V., Breitenbrunn/Erzgebirge (Germany). Arbeitskreis ' Tailings' ; Maerten, H. [UIT GmbH, Dresden (Germany); Heathgate Resources Pty. Ltd., Adelaide, SA (Australia); Quasar Resources Pty. Ltd., Adelaide, SA (Australia)

2008-03-13

Management of the environment in the uranium mining industry has an eventful history of more than 50 years. In addition to examples of successful restoration of mining and preparation sites in some countries there are also numerous cases, in which no or defective restoration left behind serious waste deposits. In the course of the renaissance of the uranium industry there is increasing interest in the rehabilitation of such waste sites. There is still an urgent requirement to eradicate the environmental effects of the old mining industry. Previous deposits could be of interest for renewed working under the present economic boundary conditions. Restoration as an integral part of the current and future uranium mining industry with the application of modern international safety standards is extremely important. The contribution provides a survey of restoration projects of the old mining industry in various parts of the world and shows how the International Atomic Energy Agency, the national supervisory and approval authorities as well as the mining companies collaborate closely at many sites on solution of the difficult problems. (orig.)

The thermoelectric performance of bulk three-dimensional graphene

Energy Technology Data Exchange (ETDEWEB)

Yang, Zhi, E-mail: yangzhi@tyut.edu.cn [Key Lab of Advanced Transducers and Intelligent Control System, Ministry of Education and Shanxi Province, Taiyuan University of Technology, Taiyuan 030024 (China); College of Physics and Optoelectronics, Taiyuan University of Technology, Taiyuan 030024 (China); Lan, Guoqiang; Ouyang, Bin [Department of Mining and Materials Engineering, McGill University, Montreal H3A 0C5 (Canada); Xu, Li-Chun; Liu, Ruiping [College of Physics and Optoelectronics, Taiyuan University of Technology, Taiyuan 030024 (China); Liu, Xuguang, E-mail: liuxuguang@tyut.edu.cn [Key Lab of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024 (China); College of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Song, Jun [Department of Mining and Materials Engineering, McGill University, Montreal H3A 0C5 (Canada)

2016-11-01

The electronic and thermoelectric properties of a new carbon bulk material, three-dimensional (3D) graphene, are investigated in this study. Our results show that 3D graphene has unique electronic structure, i.e., near the Fermi level there exist Dirac cones. More importantly, the thermoelectric performance of 3D graphene is excellent, at room temperature the thermoelectric figure of merit (ZT) is 0.21, an order of magnitude higher than that of graphene. By introducing line defects, the ZT of 3D graphene could be enhanced to 1.52, indicating 3D graphene is a powerful candidate for constructing novel thermoelectric materials. - Highlights: • There exist Dirac cones in three-dimensional (3D) graphene. • The thermoelectric performance of 3D graphene is excellent. • The defective 3D graphene has better thermoelectric performance.

Exploration and Mining Roadmap

Energy Technology Data Exchange (ETDEWEB)

none,

2002-09-01

This Exploration and Mining Technology Roadmap represents the third roadmap for the Mining Industry of the Future. It is based upon the results of the Exploration and Mining Roadmap Workshop held May 10 ñ 11, 2001.

No nuclear mining industries and the increase to natural radiation exposure

International Nuclear Information System (INIS)

Pires do Rio, Monica Aquino

1999-01-01

Mining and processing activities dealing with mineral ores containing associated uranium and thorium series elements can make these radionuclides available in their products, byproducts and in the environment, leading to the enhancement of the exposure of the public to natural radiation. In the present study, niobium, phosphate, coal and gold mining plants have been selected as case studies, aiming to identify possible radiological impact sources during and after ceasing the operation on these units. In order to achieve that, the radiological characterization of samples from ore processing, drainage water and other liquid emissions was carried out. The potential environmental radiological impact was quantified by means of estimating the effective dose equivalent, H E , for present and future scenarios considering the use of the environment in the vicinities of the units and future tailing storage sites. The results confirm these mining industries as activities potentially enhancing exposure to natural radiation. The possible use of solid wastes, abandoned at the end of operation, represents a long term radiological concern. The acid drainage, as well as the chemical processing of mineral ores constitute relevant impact factors for present and future scenarios. Thus, the legislation for environmental licensing must be reviewed in order to take into account the potential environmental radiological impact caused by these units, as well as the establishment of remediation procedures for waste storage areas in the existing sites. (author)

Radon exposure in uranium mining industry vs. exposure in tourist caves

International Nuclear Information System (INIS)

Quindos Poncela, L.; Fernandez Navarro, P.; Sainz Fernandez, C.; Gomez Arozamena, J.; Bordonoba Perez, M.

2004-01-01

There is a fairly general consensus among health physicists and radiation professionals that exposure to radon progeny is the largest and most variable contribution to the population's exposure to natural sources of radiation. However, this exposure is the subject of continuing debate concerning the validity of risk assessment and recommendations on how to act in radon-prone areas. The purpose of this contribution is to situate the radon issue in Spain in two very different settings. The first is a uranium mining industry located in Saelices el Chico (Salamanca), which is under strict control of the Spanish Nuclear Safety Council (CSN). We have measured radon concentrations in different workplaces in this mine over a five-year period. The second setting comprises four tourist caves, three of which are located in the province of Cantabria and the fourth on the Canary Island of Lanzarote. These caves are not subject to any administrative control of radiation exposure. Measured air 222 Rn concentrations were used to estimate annual effective doses due to radon inhalation in the two settings, and dose values were found to be from 2 to 10 times lower in the uranium mine than in the tourist caves. These results were analysed in the context of the new European Basic Safety Standards Directive (EU-BSS, 1996). (authors)

Africa's Mining Sector Development: An Industry Perspective ...

African Journals Online (AJOL)

Open Access DOWNLOAD FULL TEXT ... major mining destination for mining companies from Europe, North America, China, and of course South Africa. ... interest in Africa, because the continent is clearly a significant potential source of raw ...

Australian Mining's product register 1990-91

Energy Technology Data Exchange (ETDEWEB)

1990-01-01

The Australian Minings' Product Register 1990-91 contains an industry review, resource assessment, mineral industry statistics, directory of exploration and mining companies, buyers guide and directory of consultants.

High Temperature Integrated Thermoelectric Ststem and Materials

Energy Technology Data Exchange (ETDEWEB)

Mike S. H. Chu

2011-06-06

The final goal of this project is to produce, by the end of Phase II, an all ceramic high temperature thermoelectric module. Such a module design integrates oxide ceramic n-type, oxide ceramic p-type materials as thermoelectric legs and oxide ceramic conductive material as metalizing connection between n-type and p-type legs. The benefits of this all ceramic module are that it can function at higher temperatures (> 700 C), it is mechanically and functionally more reliable and it can be scaled up to production at lower cost. With this all ceramic module, millions of dollars in savings or in new opportunities recovering waste heat from high temperature processes could be made available. A very attractive application will be to convert exhaust heat from a vehicle to reusable electric energy by a thermoelectric generator (TEG). Phase I activities were focused on evaluating potential n-type and p-type oxide compositions as the thermoelectric legs. More than 40 oxide ceramic powder compositions were made and studied in the laboratory. The compositions were divided into 6 groups representing different material systems. Basic ceramic properties and thermoelectric properties of discs sintered from these powders were measured. Powders with different particles sizes were made to evaluate the effects of particle size reduction on thermoelectric properties. Several powders were submitted to a leading thermoelectric company for complete thermoelectric evaluation. Initial evaluation showed that when samples were sintered by conventional method, they had reasonable values of Seebeck coefficient but very low values of electrical conductivity. Therefore, their power factors (PF) and figure of merits (ZT) were too low to be useful for high temperature thermoelectric applications. An unconventional sintering method, Spark Plasma Sintering (SPS) was determined to produce better thermoelectric properties. Particle size reduction of powders also was found to have some positive benefits

JAIF's 23rd nuclear industry survey: strengthening industrial foundations under low economic growth

International Nuclear Information System (INIS)

Anon.

1983-01-01

Each year since the beginning of nuclear development in Japan, Japan Atomic Industrial Forum has conducted the survey of the nuclear-related aspects in mining and manufacturing industries, electric utilities, trading firms, etc., regarding their expenditures, sales and personnel. The results of the 23rd survey for fiscal 1981 (April, 1981, to March, 1982,) are described. The salient points in the year, as compared with fiscal 1980, are as follows: (trend in expenditures) nuclear-related expenditures exceeded yen2 trillion, up 12 %; the operation and maintenance costs of electric utilities varied, but overall, up 25 %; the nuclear-related expenditures of mining and manufacturing industries were up 34 %; (trend in sales) the new record in mining and manufacturing industries - the sales topped yen1 trillion; the sales of reactor equipments rose by 59 %; the sales by mining and manufacturing industries to electric utilities up 42 %; the nuclear-related exports of mining and manufacturing industries grew by 13 %; the revenues and sales exceeded the expenditures in mining and manufacturing industries. (Mori, K.)

Developments in the German coal mining industry; Entwicklungen im deutschen Steinkohlenbergbau

Energy Technology Data Exchange (ETDEWEB)

Eikhoff, J. [Deutsche Steinkohle AG (DSK), Herne (Germany)

2007-02-01

The developments in the German coal mining industry are always associated with the questions of national energy supply. The main emphasis is on a balanced energy mix with the aim of security of supply, compatibility with the environment and profitability. The operating aim of an increase in productivity to reduce costs is derived on this basis. The innovative operation required for this purpose results from the combination of technical, process and social innovation. The two last-mentioned are becoming increasingly important for a high rate of innovation at the collieries of DSK. (orig.)

Socially Responsible Mining: the Relationship between Mining and Poverty, Human Health and the Environment

Science.gov (United States)

Maier, Raina M.; Díaz-Barriga, Fernando; Field, James A.; Hopkins, James; Klein, Bern; Poulton, Mary M.

2016-01-01

Increasing global demand for metals is straining the ability of the mining industry to physically keep up with demand (physical scarcity). On the other hand, social issues including the environmental and human health consequences of mining as well as the disparity in income distribution from mining revenues are disproportionately felt at the local community level. This has created social rifts, particularly in the developing world, between affected communities and both industry and governments. Such rifts can result in a disruption of the steady supply of metals (situational scarcity). Here we discuss the importance of mining in relationship to poverty, identify steps that have been taken to create a framework for socially responsible mining, and then discuss the need for academia to work in partnership with communities, government, and industry to develop trans-disciplinary research-based step change solutions to the intertwined problems of physical and situational scarcity. PMID:24552962

Estimating the continuous risk of accidents occuring in the mining industry in South Africa

Directory of Open Access Journals (Sweden)

Van den Honert, Andrew Francis

2015-11-01

Full Text Available This study contributes to the on-going efforts to improve occupational safety in the mining industry by creating a model capable of predicting the continuous risk of occupational accidents occurring. Contributing factors were identified and their sensitivity quantified. The approach included using an Artificial Neural Network (ANN to identify patterns between the input attributes and to predict the continuous risk of accidents occurring. The predictive Artificial Neural Network (ANN model used in this research was created, trained, and validated in the form of a case study with data from a platinum mine near Rustenburg in South Africa. This resulted in meaningful correlation between the predicted continuous risk and actual accidents.

Thermoelectricity: materials and applications

International Nuclear Information System (INIS)

Elberg, S.; Mathonnet, P.

1975-01-01

After a brief recall of the basic principles of thermoelectricity, the essential characteristics intervening in the different thermoelectric devices operating modes are defined. Properties of the materials the most used nowadays and performances of the apparatus that they allow to realize are indicated. Advantages and drawbacks of the principal applications in the form of electrical generators, refrigerators and heat pumps are pointed out [fr

Mining expansion reflects confidence in South Africa

International Nuclear Information System (INIS)

Van den Bosch, L.W.P.

1982-01-01

The South African mining industry for 1981 is discussed. Attention is given to the economics of the mining industry, including coal, gold, diamonds, uranium and platinum. In 1981 research was done on mining safety and labour conditions, as well as training

Radiological protection in the mining industry

International Nuclear Information System (INIS)

O'Riordan, M.C.

1976-01-01

The information contained in the National Radiological Protection Board's report (Strong, J.C., Laidlaw, A.J. and O'Riordan, M.C., Radon and its daughters in various British mines, NRPB-R39 (1975), HMSO) is updated with data collected between October 1975 and January 1976, and certain aspects of the work highlighted. The latest results in the continuing survey, which now covers more than 60 non-coal mines employing nearly 2000 men underground, reflect the corrective actions taken in a number of mines by improvements in ventilation management. The survey is now carried out by means of radon flasks supplied by post and returned to the NRPB for measurement. An empirical relationship is used to relate the radon gas and daughter concentrations at different ventilation rates. The results show that there has been a marked decrease (from 42% to 24%) in the number of men exposed above 4 working level months (WLM) in a year, the category requiring supervision (1 to 4 WLM in a year) has increased from 15% to 28%, and the lowest exposure category has increased from 43% to 48%. Although excessive exposures are still a problem, particularly in some tin mines in Cornwall, general compliance with the exposure limit seems possible in the near future. (U.K.)

FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

Energy Technology Data Exchange (ETDEWEB)

Mike L. Fulcher; Kenneth L. Knittel

2004-06-08

The work performed on this program was to develop wear resistant, tough FM composite materials with efforts focused on WC-Co based FM systems. The materials were developed for use in mining industry wear applications. Components of interest were drill bit inserts for drilling blast holes. Other component applications investigated included wear plates for a variety of equipment such as pit shovels, wear surfaces for conveyors, milling media for ball milling operations, hydrocyclone cones, grader blades and dozer teeth. Cross-cutting technologies investigated included hot metal extrusion dies, drill bits for circuit board fabrication, cutting tools for cast iron and aluminum machining. An important part of the work was identification of the standard materials used in drilling applications. A materials trade study to determine those metals and ceramics used for mining applications provided guidance for the most important materials to be investigated. WC-Co and diamond combinations were shown to have the most desirable properties. Other considerations such as fabrication technique and the ability to consolidate shifted the focus away from diamond materials and toward WC-Co. Cooperating partners such as Kennametal and Kyocera assisted with supplies, evaluations of material systems, fabricated parts and suggestions for cross-cutting technology applications for FM architectures. Kennametal provided the raw materials (WC-Co and Al-TiCN powders) for the extent of the material evaluations. Kyocera shared their research into various FM systems and provided laboratory testing of fabricated materials. Field testing provided by partners Superior Rock Bit and Brady Mining and Construction provided insight into the performance of the fabricated materials under actual operational conditions. Additional field testing of cross-cutting technology, the extrusion of hot metals, at Extruded Metals showed the potential for additional market development.

Tools of Realization of Social Responsibility of Industrial Business for Sustainable Socio-economic Development of Mining Region's Rural Territory

Science.gov (United States)

Jurzina, Tatyana; Egorova, Natalia; Zaruba, Natalia; Kosinskij, Peter

2017-11-01

Modern conditions of the Russian economy do especially relevant questions of social responsibility of industrial business of the mining region for sustainable social and economic development of rural territories that demands search of the new strategy, tools, ways for positioning and increase in competitiveness of the enterprises, which are carrying out the entrepreneurial activity in this territory. The article opens problems of an influence of the industrial enterprises on the territory of presence, reasons the theoretical base directed to the formation of practical tools (mechanism) providing realization of social responsibility of business for sustainable social and economic development of rural territories of the mining region.

Tools of Realization of Social Responsibility of Industrial Business for Sustainable Socio-economic Development of Mining Region's Rural Territory

Directory of Open Access Journals (Sweden)

Jurzina Tatyana

2017-01-01

Full Text Available Modern conditions of the Russian economy do especially relevant questions of social responsibility of industrial business of the mining region for sustainable social and economic development of rural territories that demands search of the new strategy, tools, ways for positioning and increase in competitiveness of the enterprises, which are carrying out the entrepreneurial activity in this territory. The article opens problems of an influence of the industrial enterprises on the territory of presence, reasons the theoretical base directed to the formation of practical tools (mechanism providing realization of social responsibility of business for sustainable social and economic development of rural territories of the mining region.

Coupled Thermoelectric Devices: Theory and Experiment

Directory of Open Access Journals (Sweden)

Jaziel A. Rojas

2016-07-01

Full Text Available In this paper, we address theoretically and experimentally the optimization problem of the heat transfer occurring in two coupled thermoelectric devices. A simple experimental set up is used. The optimization parameters are the applied electric currents. When one thermoelectric is analysed, the temperature difference Δ T between the thermoelectric boundaries shows a parabolic profile with respect to the applied electric current. This behaviour agrees qualitatively with the corresponding experimental measurement. The global entropy generation shows a monotonous increase with the electric current. In the case of two coupled thermoelectric devices, elliptic isocontours for Δ T are obtained in applying an electric current through each of the thermoelectrics. The isocontours also fit well with measurements. Optimal figure of merit is found for a specific set of values of the applied electric currents. The entropy generation-thermal figure of merit relationship is studied. It is shown that, given a value of the thermal figure of merit, the device can be operated in a state of minimum entropy production.

Australian uranium mining policy

International Nuclear Information System (INIS)

Fisk, B.

1985-01-01

Australian government policy is explained in terms of adherence to the Non-Proliferation Treaty. Two alleged uncertainties are discussed: the future of Australian mining industry as a whole -on which it is said that Australian uranium mines will continue to be developed; and detailed commercial policy of the Australian government - on which it is suggested that the three-mines policy of limited expansion of the industry would continue. Various aspects of policy, applying the principles of the NPT, are listed. (U.K.)

Occupational respiratory diseases in the South African mining industry.

Science.gov (United States)

Nelson, Gill

2013-01-24

Crystalline silica and asbestos are common minerals that occur throughout South Africa, exposure to either causes respiratory disease. Most studies on silicosis in South Africa have been cross-sectional and long-term trends have not been reported. Although much research has been conducted on the health effects of silica dust and asbestos fibre in the gold-mining and asbestos-mining sectors, little is known about their health effects in other mining sectors. The aims of this thesis were to describe silicosis trends in gold miners over three decades, and to explore the potential for diamond mine workers to develop asbestos-related diseases and platinum mine workers to develop silicosis. Mine workers for the three sub-studies were identified from a mine worker autopsy database at the National Institute for Occupational Health. From 1975 to 2007, the proportions of white and black gold mine workers with silicosis increased from 18 to 22% and from 3 to 32% respectively. Cases of diamond and platinum mine workers with asbestos-related diseases and silicosis, respectively, were also identified. The trends in silicosis in gold miners at autopsy clearly demonstrate the failure of the gold mines to adequately control dust and prevent occupational respiratory disease. The two case series of diamond and platinum mine workers contribute to the evidence for the risk of asbestos-related diseases in diamond mine workers and silicosis in platinum mine workers, respectively. The absence of reliable environmental dust measurements and incomplete work history records impedes occupational health research in South Africa because it is difficult to identify and/or validate sources of dust exposure that may be associated with occupational respiratory disease.

Data mining in pharma sector: benefits.

Science.gov (United States)

Ranjan, Jayanthi

2009-01-01

The amount of data getting generated in any sector at present is enormous. The information flow in the pharma industry is huge. Pharma firms are progressing into increased technology-enabled products and services. Data mining, which is knowledge discovery from large sets of data, helps pharma firms to discover patterns in improving the quality of drug discovery and delivery methods. The paper aims to present how data mining is useful in the pharma industry, how its techniques can yield good results in pharma sector, and to show how data mining can really enhance in making decisions using pharmaceutical data. This conceptual paper is written based on secondary study, research and observations from magazines, reports and notes. The author has listed the types of patterns that can be discovered using data mining in pharma data. The paper shows how data mining is useful in the pharma industry and how its techniques can yield good results in pharma sector. Although much work can be produced for discovering knowledge in pharma data using data mining, the paper is limited to conceptualizing the ideas and view points at this stage; future work may include applying data mining techniques to pharma data based on primary research using the available, famous significant data mining tools. Research papers and conceptual papers related to data mining in Pharma industry are rare; this is the motivation for the paper.

Nano-Micro Materials Enabled Thermoelectricity From Window Glasses

KAUST Repository

Inayat, Salman Bin

2012-11-03

With growing world population and decreasing fossil fuel reserves we need to explore and utilize variety of renewable and clean energy sources to meet the imminent challenge of energy crisis. Solar energy is considered as the leading promising alternate energy source with the pertinent challenge of off sunshine period and uneven worldwide distribution of usable sun light. Although thermoelectricity is considered as a reasonable energy harvester from wasted heat, its mass scale usage is yet to be developed. By transforming window glasses into generators of thermoelectricity, this doctoral work explores engineering aspects of using the temperature gradient between the hot outdoor heated by the sun and the relatively cold indoor of a building for mass scale energy generation. In order to utilize the two counter temperature environments simultaneously, variety of techniques, including: a) insertion of basic metals like copper and nickel wire, b) sputtering of thermoelectric films on side walls of individual glass strips to form the thickness depth of the glass on subsequent curing of the strips, and c) embedding nano-manufactured thermoelectric pillars, have been implemented for innovative integration of thermoelectric materials into window glasses. The practical demonstration of thermoelectric windows has been validated using a finite element model to predict the behavior of thermoelectric window under variety of varying conditions. MEMS based characterization platform has been fabricated for thermoelectric characterization of thin films employing van der Pauw and four probe modules. Enhancement of thermoelectric properties of the nano- manufactured pillars due to nano-structuring, achieved through mechanical alloying of micro-sized thermoelectric powders, has been explored. Modulation of thermoelectric properties of the nano-structured thermoelectric pillars by addition of sulfur to nano-powder matrix has also been investigated in detail. Using the best possible p

Compatibility of Segments of Thermoelectric Generators

Science.gov (United States)

Snyder, G. Jeffrey; Ursell, Tristan

2009-01-01

A method of calculating (usually for the purpose of maximizing) the power-conversion efficiency of a segmented thermoelectric generator is based on equations derived from the fundamental equations of thermoelectricity. Because it is directly traceable to first principles, the method provides physical explanations in addition to predictions of phenomena involved in segmentation. In comparison with the finite-element method used heretofore to predict (without being able to explain) the behavior of a segmented thermoelectric generator, this method is much simpler to implement in practice: in particular, the efficiency of a segmented thermoelectric generator can be estimated by evaluating equations using only hand-held calculator with this method. In addition, the method provides for determination of cascading ratios. The concept of cascading is illustrated in the figure and the definition of the cascading ratio is defined in the figure caption. An important aspect of the method is its approach to the issue of compatibility among segments, in combination with introduction of the concept of compatibility within a segment. Prior approaches involved the use of only averaged material properties. Two materials in direct contact could be examined for compatibility with each other, but there was no general framework for analysis of compatibility. The present method establishes such a framework. The mathematical derivation of the method begins with the definition of reduced efficiency of a thermoelectric generator as the ratio between (1) its thermal-to-electric power-conversion efficiency and (2) its Carnot efficiency (the maximum efficiency theoretically attainable, given its hot- and cold-side temperatures). The derivation involves calculation of the reduced efficiency of a model thermoelectric generator for which the hot-side temperature is only infinitesimally greater than the cold-side temperature. The derivation includes consideration of the ratio (u) between the

Mining industry enters a new era of AIDS prevention. Eye witness: South Africa.

Science.gov (United States)

Heywood, M

1996-06-01

Miners in South Africa are now more at risk of contracting human immunodeficiency virus (HIV) than of being in a mining accident. Some epidemiologists predict that the mines could be experiencing 12,000-40,000 deaths related to acquired immunodeficiency syndrome (AIDS) by 2010. In 1986, HIV infection among mineworkers was 1/3500. Gencor medical personnel now estimate that 20% of the company's employees are HIV-positive and that 30 workers are dying of AIDS each month. In August 1995, the Chamber of Mines, the World Bank, and the World Health Organization (WHO) held a seminar to discuss the potential impact of the epidemic; it was followed by a workshop, "Research Needs and Priorities for the Management of HIV/AIDS Transmission in the Mining Industry," which was organized by the Epidemiology Unit in Johannesburg. Although the seminar invited no people with HIV, mineworkers, or government representatives, the workshop did; however, no representatives of the National Union of Mineworkers (NUM), or the Chamber of Mines, came. In spite of this, a new, holistic approach to HIV-prevention is emerging in the mining sector. A decade of education has not changed risk behaviors, so more emphasis will be placed on outreach programs to the communities, including the prostitutes, with which the miners interact, and on treatment of sexually transmitted diseases (STDs). The mining sector is in a unique position to fight HIV because it already has an extensive medical infrastructure with the capacity to treat STDs effectively, a unionized workforce to provide a pool of peer educators, and recruitment agencies to extend HIV-prevention into rural areas. Obstacles to effective HIV/AIDS education include discrimination (Workers are tested for HIV without consent, and dismissed, if found to be positive, regardless of union agreements.); a psychological factor that is related to underground work and produces recklessness; poor living conditions; and illiteracy. Many myths remain about

Occupational respiratory diseases in the South African mining industry

Directory of Open Access Journals (Sweden)

Gill Nelson

2013-01-01

Full Text Available Background: Crystalline silica and asbestos are common minerals that occur throughout South Africa, exposure to either causes respiratory disease. Most studies on silicosis in South Africa have been cross-sectional and long-term trends have not been reported. Although much research has been conducted on the health effects of silica dust and asbestos fibre in the gold-mining and asbestos-mining sectors, little is known about their health effects in other mining sectors. Objective: The aims of this thesis were to describe silicosis trends in gold miners over three decades, and to explore the potential for diamond mine workers to develop asbestos-related diseases and platinum mine workers to develop silicosis. Methods: Mine workers for the three sub-studies were identified from a mine worker autopsy database at the National Institute for Occupational Health. Results: From 1975 to 2007, the proportions of white and black gold mine workers with silicosis increased from 18 to 22% and from 3 to 32% respectively. Cases of diamond and platinum mine workers with asbestos-related diseases and silicosis, respectively, were also identified. Conclusion: The trends in silicosis in gold miners at autopsy clearly demonstrate the failure of the gold mines to adequately control dust and prevent occupational respiratory disease. The two case series of diamond and platinum mine workers contribute to the evidence for the risk of asbestos-related diseases in diamond mine workers and silicosis in platinum mine workers, respectively. The absence of reliable environmental dust measurements and incomplete work history records impedes occupational health research in South Africa because it is difficult to identify and/or validate sources of dust exposure that may be associated with occupational respiratory disease.

The history of the British coal industry. Volume 2, 1700-1830: the industrial revolution

Energy Technology Data Exchange (ETDEWEB)

Flinn, M W; Stoker, D

1984-01-01

The history of the British coal industry from 1700 to 1830 is discussed in terms of the development of coal-mining, the ownership and management of collieries, technology, the transport of coal, capital, markets, the organization of coal marketing, the economics of mining, the organization of mining labor, wages and industrial relations, the mining community, and the coal industry and the economy. A glossary of mining terms is provided, along with definitions of weights and measures used in the period.

Blasting Standards for the Ghanaian Mining Industry | Amegbey ...

African Journals Online (AJOL)

Ghana is a well known mining nation and hard rock mining has been going on since the 10th century. Mining companies in Ghana are well aware of the regulatory requirements to carry out blasting activities such that neighbouring communities are protected from excessive impact as a result of blast vibrations amongst other ...

Critical review of thermoelectrics in modern power generation applications

Directory of Open Access Journals (Sweden)

Saqr Khalid M.

2009-01-01

Full Text Available The thermoelectric complementary effects have been discovered in the nineteenth century. However, their role in engineering applications has been very limited until the first half of the twentieth century, the beginning of space exploration era. Radioisotope thermoelectric generators have been the actual motive for the research community to develop efficient, reliable and advanced thermoelectrics. The efficiency of thermoelectric materials has been doubled several times during the past three decades. Nevertheless, there are numerous challenges to be resolved in order to develop thermoelectric systems for our modern applications. This paper discusses the recent advances in thermoelectric power systems and sheds the light on the main problematic concerns which confront contemporary research efforts in that field.

Blasting activity of the mining industry in the United States

Energy Technology Data Exchange (ETDEWEB)

Richards, P.G. [Lamont-Doherty Earth Observatory, Palisades, NY (United States)

1994-12-31

About 2 megatons of chemcial explosives are used annually in the U.S., principally in mining for coal and metal ores. Most of this explosive is used in surface mines rather than underground mines. On a typical work day there are about 30 explosions greater than 50 tons, including one shot greater than 200 tons. Shots in underground mines are typically much smaller, because of safety considerations. Almost all chemical explosions above 1 ton in the U.S. are ripple-fired and almost all above 10 tons are also shallow. Almost all are intended to break rock or to remove overburden, and are therefore very inefficient, relative to contained single shots, in generating seismic signals at regional ore teleseismic distances. These attributes make explosions used in industry quite different from the Non-Proliferation Experiment. There is very little correlation between the total amount of explosive used in a ripple-fired blast, and the seismic magnitude. Statistics on blasting magnitudes are of interest in the context of monitoring network. There is a blast reported with regional (or duration) magnitude 3.5 or above, in the U.S., a few tens of times a year; but it would appear that the teleseismic magnitude (m{sub b}) of such events are significantly lower than 3.5. Only about 10 to 30 chemical explosions per year in the U.S. are detected teleseismically with m{sub b}>3. Methods of routinely discriminating most chemical explosions from other seismic sources use spectra of regional phases at frequencies up to about 30 Hz, which is significantly higher than frequencies needed for recording teleseismic signals. The best discriminants appear to be the high-frequency spectral ratio of waves with P-wave energy (e.g. Pn or Pg) to waves with S-wave energy (Sn or Lg); and the use of spectrograms, which can be particularly useful in identifying ripple-firing.

Derived surface contamination limits for the uranium mining and milling industry

International Nuclear Information System (INIS)

Ching, S.H.

1984-10-01

Derived Surface Contamination Limits (DSCL) are proposed for the control of surface contamination at the work place for the uranium mining and milling industry. They have been derived by a method incorporating recent ICRP recommendations and consideration of the radiation exposure pathways of ingestion, inhalation and external irradiation of the basal layer of skin. A generalized DSCL of 10 5 Bq/m 2 of beta activity is recommended for all contaminants likely to be found in uranium mine and mill workplaces except for fresh uranium concentrates. In the latter case, the DSCL is expressed in terms of alpha activity because the ratio of beta to alpha activities for fresh uranium concentrates is variable; the beta activity increases with the ingrowth of U-238 daughter products (Th-234 and Pa-234m) until secular equilibrium is re-established in about six months. A surface contamination limit of 10 4 Bq/m 2 of beta activity is proposed for the release of non-porous materials and equipment with no detectable loose contamination to the public domain

A thermoelectric cap for seafloor hydrothermal vents

International Nuclear Information System (INIS)

Xie, Yu; Wu, Shi-jun; Yang, Can-jun

2016-01-01

Highlights: • We developed a thermoelectric cap (TC) to harvest hydrothermal energy. • The TC was deployed at a hydrothermal vent site near Kueishantao islet, Taiwan. • The TC monitored the temperature of the hydrothermal fluids during the field test. • The TC could make the thermal energy of hydrothermal fluids a viable power source. - Abstract: Long-term in situ monitoring is crucial to seafloor scientific investigations. One of the challenges of operating sensors in seabed is the lifespan of the sensors. Such sensors are commonly powered by batteries when other alternatives, such as tidal or solar energy, are unavailable. However, the batteries have a limited lifespan and must be recharged or replaced periodically, which is costly and impractical. A thermoelectric cap, which harvests the thermal energy of hydrothermal fluids through a conduction pipe and converts the heat to electrical energy by using thermoelectric generators, was developed to avoid these inconveniences. The thermoelectric cap was combined with a power and temperature measurement system that enables the thermoelectric cap to power a light-emitting diode lamp, an electronic load (60 Ω), and 16 thermocouples continuously. The thermoelectric cap was field tested at a shallow hydrothermal vent site near Kueishantao islet, which is located offshore of northeastern Taiwan. By using the thermal gradient between hydrothermal fluids and seawater, the thermoelectric cap obtained a sustained power of 0.2–0.5 W during the field test. The thermoelectric cap successfully powered the 16 thermocouples and recorded the temperature of the hydrothermal fluids during the entire field test. Our results show that the thermal energy of hydrothermal fluids can be an alternative renewable power source for oceanographic research.

Nanostructured silicon for thermoelectric

Science.gov (United States)

Stranz, A.; Kähler, J.; Waag, A.; Peiner, E.

2011-06-01

Thermoelectric modules convert thermal energy into electrical energy and vice versa. At present bismuth telluride is the most widely commercial used material for thermoelectric energy conversion. There are many applications where bismuth telluride modules are installed, mainly for refrigeration. However, bismuth telluride as material for energy generation in large scale has some disadvantages. Its availability is limited, it is hot stable at higher temperatures (>250°C) and manufacturing cost is relatively high. An alternative material for energy conversion in the future could be silicon. The technological processing of silicon is well advanced due to the rapid development of microelectronics in recent years. Silicon is largely available and environmentally friendly. The operating temperature of silicon thermoelectric generators can be much higher than of bismuth telluride. Today silicon is rarely used as a thermoelectric material because of its high thermal conductivity. In order to use silicon as an efficient thermoelectric material, it is necessary to reduce its thermal conductivity, while maintaining high electrical conductivity and high Seebeck coefficient. This can be done by nanostructuring into arrays of pillars. Fabrication of silicon pillars using ICP-cryogenic dry etching (Inductive Coupled Plasma) will be described. Their uniform height of the pillars allows simultaneous connecting of all pillars of an array. The pillars have diameters down to 180 nm and their height was selected between 1 micron and 10 microns. Measurement of electrical resistance of single silicon pillars will be presented which is done in a scanning electron microscope (SEM) equipped with nanomanipulators. Furthermore, measurement of thermal conductivity of single pillars with different diameters using the 3ω method will be shown.

Mine waste management legislation. Gold mining areas in Romania

Science.gov (United States)

Maftei, Raluca-Mihaela; Filipciuc, Constantina; Tudor, Elena

2014-05-01

Problems in the post-mining regions of Eastern Europe range from degraded land and landscapes, huge insecure dumps, surface cracks, soil pollution, lowering groundwater table, deforestation, and damaged cultural potentials to socio economic problems like unemployment or population decline. There is no common prescription for tackling the development of post-mining regions after mine closure nor is there a common definition of good practices or policy in this field. Key words : waste management, legislation, EU Directive, post mining Rosia Montana is a common oh 16 villages; one of them is also called Rosia Montana, a traditional mining Community, located in the Apuseni Mountains in the North-Western Romania. Beneath part of the village area lays one of the largest gold and silver deposits in Europe. In the Rosia Montana area mining had begun ever since the height of the Roman Empire. While the modern approach to mining demands careful remediation of environmental impacts, historically disused mines in this region have been abandoned, leaving widespread environmental damage. General legislative framework Strict regulations and procedures govern modern mining activity, including mitigation of all environmental impacts. Precious metals exploitation is put under GO no. 190/2000 re-published in 2004. The institutional framework was established and organized based on specific regulations, being represented by the following bodies: • The Ministry of Economy and Commerce (MEC), a public institution which develops the Government policy in the mining area, also provides the management of the public property in the mineral resources area; • The National Agency for the development and implementation of the mining Regions Reconstruction Programs (NAD), responsible with promotion of social mitigation measures and actions; • The Office for Industry Privatization, within the Education Ministry, responsible with privatization of companies under the CEM; • The National

Carbon-Nanotube-Based Thermoelectric Materials and Devices

Energy Technology Data Exchange (ETDEWEB)

Blackburn, Jeffrey L. [Chemistry and Nanoscience Center, National Renewable Energy Laboratory, Golden CO 80401-3305 USA; Ferguson, Andrew J. [Chemistry and Nanoscience Center, National Renewable Energy Laboratory, Golden CO 80401-3305 USA; Cho, Chungyeon [Department of Mechanical Engineering, Texas A& M University, College Station TX 77843-3003 USA; Grunlan, Jaime C. [Department of Mechanical Engineering, Texas A& M University, College Station TX 77843-3003 USA

2018-01-22

Conversion of waste heat to voltage has the potential to significantly reduce the carbon footprint of a number of critical energy sectors, such as the transportation and electricity-generation sectors, and manufacturing processes. Thermal energy is also an abundant low-flux source that can be harnessed to power portable/wearable electronic devices and critical components in remote off-grid locations. As such, a number of different inorganic and organic materials are being explored for their potential in thermoelectric-energy-harvesting devices. Carbon-based thermoelectric materials are particularly attractive due to their use of nontoxic, abundant source-materials, their amenability to high-throughput solution-phase fabrication routes, and the high specific energy (i.e., W g-1) enabled by their low mass. Single-walled carbon nanotubes (SWCNTs) represent a unique 1D carbon allotrope with structural, electrical, and thermal properties that enable efficient thermoelectric-energy conversion. Here, the progress made toward understanding the fundamental thermoelectric properties of SWCNTs, nanotube-based composites, and thermoelectric devices prepared from these materials is reviewed in detail. This progress illuminates the tremendous potential that carbon-nanotube-based materials and composites have for producing high-performance next-generation devices for thermoelectric-energy harvesting.

Ge/SiGe superlattices for nanostructured thermoelectric modules

International Nuclear Information System (INIS)

Chrastina, D.; Cecchi, S.; Hague, J.P.; Frigerio, J.; Samarelli, A.; Ferre–Llin, L.; Paul, D.J.; Müller, E.; Etzelstorfer, T.; Stangl, J.; Isella, G.

2013-01-01

Thermoelectrics are presently used in a number of applications for both turning heat into electricity and also for using electricity to produce cooling. Mature Si/SiGe and Ge/SiGe heteroepitaxial growth technology would allow highly efficient thermoelectric materials to be engineered, which would be compatible and integrable with complementary metal oxide silicon micropower circuits used in autonomous systems. A high thermoelectric figure of merit requires that electrical conductivity be maintained while thermal conductivity is reduced; thermoelectric figures of merit can be improved with respect to bulk thermoelectric materials by fabricating low-dimensional structures which enhance the density of states near the Fermi level and through phonon scattering at heterointerfaces. We have grown and characterized Ge-rich Ge/SiGe/Si superlattices for nanofabricated thermoelectric generators. Low-energy plasma-enhanced chemical vapor deposition has been used to obtain nanoscale-heterostructured material which is several microns thick. Crystal quality and strain control have been investigated by means of high resolution X-ray diffraction. High-resolution transmission electron microscopy images confirm the material and interface quality. Electrical conductivity has been characterized by the mobility spectrum technique. - Highlights: ► High-quality Ge/SiGe multiple quantum wells for thermoelectric applications ► Mobility spectra of systems featuring a large number of parallel conduction channels ► Competitive thermoelectric properties measured in single devices

Sustainable Mining Environment: Technical Review of Post-mining Plans

Directory of Open Access Journals (Sweden)

Restu Juniah

2017-12-01

Full Text Available The mining industry exists because humans need mining commodities to meet their daily needs such as motor vehicles, mobile phones, electronic equipment and others. Mining commodities as mentioned in Government Regulation No. 23 of 2010 on Implementation of Mineral and Coal Mining Business Activities are radioactive minerals, metal minerals, nonmetallic minerals, rocks and coal. Mineral and coal mining is conducted to obtain the mining commodities through production operations. Mining and coal mining companies have an obligation to ensure that the mining environment in particular after the post production operation or post mining continues. The survey research aims to examine technically the post-mining plan in coal mining of PT Samantaka Batubara in Indragiri Hulu Regency of Riau Province towards the sustainability of the mining environment. The results indicate that the post-mining plan of PT Samantaka Batubara has met the technical aspects required in post mining planning for a sustainable mining environment. Postponement of post-mining land of PT Samantaka Batubara for garden and forest zone. The results of this study are expected to be useful and can be used by stakeholders, academics, researchers, practitioners and associations of mining, and the environment.

Thermoelectricity an introduction to the principles

CERN Document Server

MacDonald, D K C

2006-01-01

This introductory treatment provides an understanding of the fundamental concepts and principles involved in the study of thermoelectricity in solids and of conduction in general. Aimed at graduate-level students and those interested in basic theory, it will be especially valuable to experimental physicists working in fields connected with electron transport and to theoreticians seeking a survey of thermoelectricity and related questions.Chronicling the early history of thermoelectricity from its discovery to modern times, this text features a considerable amount of experimental data and discu

ADA Title I allegations and the Mining, Quarrying, and Oil/Gas Extraction industry.

Science.gov (United States)

Van Wieren, Todd A; Rhoades, Laura; McMahon, Brian T

2017-01-01

The majority of research about employment discrimination in the U.S. Mining, Quarrying, and Oil/Gas (MQOGE) industries has concentrated on gender and race, while little attention has focused on disability. To explore allegations of Americans with Disabilities Act (ADA) Title I discrimination made to the Equal Employment Opportunity Commission (EEOC) by individuals with disabilities against MQOGE employers. Key data available to this study included demographic characteristics of charging parties, size of employers, types of allegations, and case outcomes. Using descriptive analysis, allegation profiles were developed for MQOGE's three main sectors (i.e., Oil/Gas Extraction, Mining except Oil/Gas, and Support Activities). These three profiles where then comparatively analyzed. Lastly, regression analysis explored whether some of the available data could partially predict MQOGE case outcomes. The predominant characteristics of MQOGE allegations were found to be quite similar to the allegation profile of U.S. private-sector industry as a whole, and fairly representative of MQOGE's workforce demographics. Significant differences between MQOGE's three main sector profiles were noted on some important characteristics. Lastly, it was found that MQOGE case outcomes could be partially predicted via some of the available variables. The study's limitations were presented and recommendations were offered for further research.

Study on heat pipe assisted thermoelectric power generation system from exhaust gas

Science.gov (United States)

Chi, Ri-Guang; Park, Jong-Chan; Rhi, Seok-Ho; Lee, Kye-Bock

2017-11-01

Currently, most fuel consumed by vehicles is released to the environment as thermal energy through the exhaust pipe. Environmentally friendly vehicle technology needs new methods to increase the recycling efficiency of waste exhaust thermal energy. The present study investigated how to improve the maximum power output of a TEG (Thermoelectric generator) system assisted with a heat pipe. Conventionally, the driving energy efficiency of an internal combustion engine is approximately less than 35%. TEG with Seebeck elements is a new idea for recycling waste exhaust heat energy. The TEG system can efficiently utilize low temperature waste heat, such as industrial waste heat and solar energy. In addition, the heat pipe can transfer heat from the automobile's exhaust gas to a TEG. To improve the efficiency of the thermal power generation system with a heat pipe, effects of various parameters, such as inclination angle, charged amount of the heat pipe, condenser temperature, and size of the TEM (thermoelectric element), were investigated. Experimental studies, CFD simulation, and the theoretical approach to thermoelectric modules were carried out, and the TEG system with heat pipe (15-20% charged, 20°-30° inclined configuration) showed the best performance.

Worker exposure to silica dust in South African non-mining industries in Gauteng: An exploratory study

CSIR Research Space (South Africa)

Khoza, NN

2012-06-01

Full Text Available %, and sandblasting 2.4%. The overall maximum and minimum exposures were 5.772 and 0.009 mg/m?, respectively. Conclusion: Workers are potentially at high risk of contracting silicosis and other diseases associated with respirable silica dust. Dust control... and monitoring were inadequate in the industries visited. It is recommended that an in-depth study be conducted and that airborne dust-control programmes be implemented. Key words: non-mining industries, silica dust, respirable crystalline silica dust...

Radon in uranium mining industry and application of SSNTD in monitoring and dose evaluation

International Nuclear Information System (INIS)

Khan, A.H.

2006-01-01

Radon is present everywhere and accounts for a globally major share of natural radiation exposure of the population. Though it is present in most of the underground workings it is a source of concern in uranium mining and ore processing industry as well as in many other operations carried out in confined spaces below the ground, like railway tunnels and non-uranium underground mines. Many monitoring techniques are available for evaluation of radon and its short-lived progeny concentrations. Scintillation cell techniques, also called Lucas cell, is one of the earliest developed methods of radon monitoring still widely used in mines where appreciable concentrations of radon above about 40-50 Bq.m -3 are expected. For low concentration of radon as observed in the atmosphere, dwellings and other workplaces, the radon absorption in charcoal followed by gamma counting, two filter method and electrostatic techniques are available. Solid state nuclear track detectors (SSNTD) are now widely used for a variety of situations for monitoring of low level of radon over an extended period of time. It is now extensively used in radon monitoring in dwellings and also in radon dosimetry in mines. Radon daughters being the more important contributors to the internal radiation exposure are also being monitored using conventional techniques as well as SSNTD. Various monitoring techniques for radon and its progeny and the concentrations observed at different stages of uranium mining, ore processing and tailings management are discussed in this presentation. (author)

Applications of thermoelectric modules on heat flow detection.

Science.gov (United States)

Leephakpreeda, Thananchai

2012-03-01

This paper presents quantitative analysis and practical scenarios of implementation of the thermoelectric module for heat flow detection. Mathematical models of the thermoelectric effects are derived to describe the heat flow from/to the detected media. It is observed that the amount of the heat flow through the thermoelectric module proportionally induces the conduction heat owing to the temperature difference between the hot side and the cold side of the thermoelectric module. In turn, the Seebeck effect takes place in the thermoelectric module where the temperature difference is converted to the electric voltage. Hence, the heat flow from/to the detected media can be observed from both the amount and the polarity of the voltage across the thermoelectric module. Two experiments are demonstrated for viability of the proposed technique by the measurements of the heat flux through the building wall and thermal radiation from the outdoor environment during daytime. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

Machine-related injuries in the US mining industry and priorities for safety research.

Science.gov (United States)

Ruff, Todd; Coleman, Patrick; Martini, Laura

2011-03-01

Researchers at the National Institute for Occupational Safety and Health studied mining accidents that involved a worker entangled in, struck by, or in contact with machinery or equipment in motion. The motivation for this study came from the large number of severe accidents, i.e. accidents resulting in a fatality or permanent disability, that are occurring despite available interventions. Accident descriptions were taken from an accident database maintained by the United States Department of Labor, Mine Safety and Health Administration, and 562 accidents that occurred during 2000-2007 fit the search criteria. Machine-related accidents accounted for 41% of all severe accidents in the mining industry during this period. Machinery most often involved in these accidents included conveyors, rock bolting machines, milling machines and haulage equipment such as trucks and loaders. The most common activities associated with these accidents were operation of the machine and maintenance and repair. The current methods to safeguard workers near machinery include mechanical guarding around moving components, lockout/tagout of machine power during maintenance and backup alarms for mobile equipment. To decrease accidents further, researchers recommend additional efforts in the development of new control technologies, training materials and dissemination of information on best practices.

Effective use of thermal energy at both hot and cold side of thermoelectric module for developing efficient thermoelectric water distillation system

International Nuclear Information System (INIS)

Al-Madhhachi, Hayder; Min, Gao

2017-01-01

Highlights: • New distillation process using thermoelectric to assist evaporation/condensation. • Novel thermoelectric distillation system with reduced specific energy consumption. • Freshwater production by thermoelectrically assisted evaporation and condensation. - Abstract: An efficient thermoelectric distillation system has been designed and constructed for production of drinkable water. The unique design of this system is to use the heat from hot side of the thermoelectric module for water evaporation and the cold side for vapour condensation simultaneously. This novel design significantly reduces energy consumption and improves the system performance. The results of experiments show that the average water production is 28.5 mL/h with a specific energy consumption of 0.00114 kW h/mL in an evaporation chamber filled with 10 × 10 × 30 mm"3 of water. This is significantly lower than the energy consumption required by other existing thermoelectric distillation systems. The results also show that a maximum temperature difference between the hot and cold side of the thermoelectric module is 42.3 °C, which led to temperature increases of 26.4 °C and 8.4 °C in water and vapour, respectively.

Review on Polymers for Thermoelectric Applications.

Science.gov (United States)

Culebras, Mario; Gómez, Clara M; Cantarero, Andrés

2014-09-18

In this review, we report the state-of-the-art of polymers in thermoelectricity. Classically, a number of inorganic compounds have been considered as the best thermoelectric materials. Since the prediction of the improvement of the figure of merit by means of electronic confinement in 1993, it has been improved by a factor of 3-4. In the mean time, organic materials, in particular intrinsically conducting polymers, had been considered as competitors of classical thermoelectrics, since their figure of merit has been improved several orders of magnitude in the last few years. We review here the evolution of the figure of merit or the power factor during the last years, and the best candidates to compete with inorganic materials. We also outline the best polymers to substitute classical thermoelectric materials and the advantages they present in comparison with inorganic systems.

Freshwater Availability and Constraints on Thermoelectric Power Generation in the Southeast U.S

International Nuclear Information System (INIS)

Feldman, David; Slough, Amanda; Garrett, Gary

2008-01-01

There is a myriad of uses to which our country's freshwater supply is currently committed. Together with increasing quantities of consumption, there are growing constraints on water availability. In our future there will be two elements of consumption at the forefront of concern: availability and efficiency. Availability of freshwater is the most important of these and is the subject of this report. To use water efficiently, we must first have it. Efficiency is key to ensuring availability for future needs. As population grows and economic and technology demands increase - especially for thermoelectric power - needs for freshwater will also increase. Thus, using our limited supplies of freshwater must be done as efficiently as possible. Thermoelectric generating industry is the largest user of our nation's water resources, including fresh, surface, ground, and saline water. Saline water use accounts for approximately 30% of thermoelectric use, while the remaining 70% is from freshwater sources. The U.S. Geological Survey (USGS) estimates that thermoelectric generation accounts for roughly 136,000 million gallons per day (MGD), or 39% of freshwater withdrawals. This ranks slightly behind agricultural irrigation as the top source of freshwater withdrawals in the U.S. in 2000. For Americans to preserve their standard of living and maintain a thriving economy it is essential that greater attention be paid to freshwater availability in efforts to meet energy demands - particularly for electric power. According to projections by the Energy Information Administration's (EIA) Annual Energy Outlook 2006 (AEO 2006) anticipated growth of thermoelectric generating capacity will be 22% between 2005 and 2030. In the 2007 Report, EIA estimates that capacity to grow from approximately 709 GW in 2005 to 862 GW in 20303. These large increases in generating capacity will result in increased water demands by thermoelectric power plants and greater competition over water between the

Thermoelectric effects in a rectangular Aharonov-Bohm geometry

Science.gov (United States)

Pye, A. J.; Faux, D. A.; Kearney, M. J.

2016-04-01

The thermoelectric transport properties of a rectangular Aharonov-Bohm ring at low temperature are investigated using a theoretical approach based on Green's functions. The oscillations in the transmission coefficient as the field is varied can be used to tune the thermoelectric response of the ring. Large magnitude thermopowers are obtainable which, in conjunction with low conductance, can result in a high thermoelectric figure of merit. The effects of single site impurities and more general Anderson disorder are considered explicitly in the context of evaluating their effect on the Fano-type resonances in the transmission coefficient. Importantly, it is shown that even for moderate levels of disorder, the thermoelectric figure of merit can remain significant, increasing the appeal of such structures from the perspective of specialist thermoelectric applications.

Bauxite Mining Sustainably

Science.gov (United States)

Atkins, Patrick R.; Bayliss, Chris; Ward, Sam

In 1990, the International Aluminum Institute began a program to report on the bauxite mining and rehabilitation activities of the worldwide industry. A survey process was initiated and reports were published in 1992, 2000 and 2004. The most recent report includes extensive data on mines representing over 70% of the world's output of bauxite and includes a more detailed focus on the social and economic as well as the environmental performance of the industry.

Proposal for a phase-coherent thermoelectric transistor

International Nuclear Information System (INIS)

Giazotto, F.; Robinson, J. W. A.; Moodera, J. S.; Bergeret, F. S.

2014-01-01

Identifying materials and devices which offer efficient thermoelectric effects at low temperature is a major obstacle for the development of thermal management strategies for low-temperature electronic systems. Superconductors cannot offer a solution since their near perfect electron-hole symmetry leads to a negligible thermoelectric response; however, here we demonstrate theoretically a superconducting thermoelectric transistor which offers unparalleled figures of merit of up to ∼45 and Seebeck coefficients as large as a few mV/K at sub-Kelvin temperatures. The device is also phase-tunable meaning its thermoelectric response for power generation can be precisely controlled with a small magnetic field. Our concept is based on a superconductor-normal metal-superconductor interferometer in which the normal metal weak-link is tunnel coupled to a ferromagnetic insulator and a Zeeman split superconductor. Upon application of an external magnetic flux, the interferometer enables phase-coherent manipulation of thermoelectric properties whilst offering efficiencies which approach the Carnot limit

Proposal for a phase-coherent thermoelectric transistor

Energy Technology Data Exchange (ETDEWEB)

Giazotto, F., E-mail: giazotto@sns.it [NEST, Instituto Nanoscienze-CNR and Scuola Normale Superiore, I-56127 Pisa (Italy); Robinson, J. W. A., E-mail: jjr33@cam.ac.uk [Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS (United Kingdom); Moodera, J. S. [Department of Physics and Francis Bitter Magnet Lab, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Bergeret, F. S., E-mail: sebastian-bergeret@ehu.es [Centro de Física de Materiales (CFM-MPC), Centro Mixto CSIC-UPV/EHU, Manuel de Lardizabal 4, E-20018 San Sebastián (Spain); Donostia International Physics Center (DIPC), Manuel de Lardizabal 5, E-20018 San Sebastián (Spain)

2014-08-11

Identifying materials and devices which offer efficient thermoelectric effects at low temperature is a major obstacle for the development of thermal management strategies for low-temperature electronic systems. Superconductors cannot offer a solution since their near perfect electron-hole symmetry leads to a negligible thermoelectric response; however, here we demonstrate theoretically a superconducting thermoelectric transistor which offers unparalleled figures of merit of up to ∼45 and Seebeck coefficients as large as a few mV/K at sub-Kelvin temperatures. The device is also phase-tunable meaning its thermoelectric response for power generation can be precisely controlled with a small magnetic field. Our concept is based on a superconductor-normal metal-superconductor interferometer in which the normal metal weak-link is tunnel coupled to a ferromagnetic insulator and a Zeeman split superconductor. Upon application of an external magnetic flux, the interferometer enables phase-coherent manipulation of thermoelectric properties whilst offering efficiencies which approach the Carnot limit.

Numerical simulations on the temperature gradient and thermal stress of a thermoelectric power generator

International Nuclear Information System (INIS)

Wu, Yongjia; Ming, Tingzhen; Li, Xiaohua; Pan, Tao; Peng, Keyuan; Luo, Xiaobing

2014-01-01

Highlights: • An appropriate ceramic plate thickness is effective in alleviating the thermal stress. • A smaller distance between thermo-pins can help prolong lifecycle of the TE module. • Either a thicker or a thinner copper conducting strip effectively reduces thermal stress. • A suitable tin soldering thickness will alleviate thermal stress intensity and increase thermal efficiency. - Abstract: Thermoelectric generator is a device taking advantage of the temperature difference in thermoelectric material to generate electric power, where the higher the temperature difference of the hot-cold ends, the higher the efficiency will be. However, higher temperature or higher heat flux upon the hot end will cause strong thermal stress which will negatively influence the lifecycle of the thermoelectric module. This phenomenon is very common in industrial applications but seldom has research work been reported. In this paper, numerical analysis on the thermodynamics and thermal stress performance of the thermoelectric module has been performed, considering the variation on the thickness of materials; the influence of high heat flux on thermal efficiency, power output, and thermal stress has been examined. It is found that under high heat flux imposing upon the hot end, the thermal stress is so strong that it has a decisive effect on the life expectation of the device. To improve the module’s working condition, different geometrical configurations are tested and the optimum sizes are achieved. Besides, the side effects on the efficiency, power output, and open circuit voltage output of the thermoelectric module are taken into consideration

Methods of synthesizing thermoelectric materials

Science.gov (United States)

Ren, Zhifeng; Chen, Shuo; Liu, Wei-Shu; Wang, Hengzhi; Wang, Hui; Yu, Bo; Chen, Gang

2016-04-05

Methods for synthesis of thermoelectric materials are disclosed. In some embodiments, a method of fabricating a thermoelectric material includes generating a plurality of nanoparticles from a starting material comprising one or more chalcogens and one or more transition metals; and consolidating the nanoparticles under elevated pressure and temperature, wherein the nanoparticles are heated and cooled at a controlled rate.

Investigation of mesoporous structures for thermoelectric applications

International Nuclear Information System (INIS)

Cojocaru, A.; Carstensen, J.; Foell, H.; Boor, J.; Schmidt, V.

2011-01-01

Mesoporous silicon is an attractive material for thermoelectric application. For pore wall thicknesses around <100 nm, phonons can not penetrate the porous layer while electrons still can, due to there smaller mean free path length. The resulting good electrical and bad thermal conductivity is a premise for efficient thermoelectric devices. This paper presents results regarding homogeneity, high porosity, and optimal pore wall thicknesses for porous silicon based thermoelectric devices.

The effect of doping on thermoelectric performance of p-type SnSe: Promising thermoelectric material

Energy Technology Data Exchange (ETDEWEB)

Singh, Niraj Kumar; Bathula, Sivaiah; Gahtori, Bhasker [CSIR-Network of Institutes for Solar Energy, CSIR-National Physical Laboratory, Dr. K. S. Krishnan Road, New Delhi 110012 (India); Tyagi, Kriti [CSIR-Network of Institutes for Solar Energy, CSIR-National Physical Laboratory, Dr. K. S. Krishnan Road, New Delhi 110012 (India); Acdemy of Scientific and Innovative Research (AcSIR), CSIR-National Physical Laboratory (NPL) Campus, New Delhi (India); Haranath, D. [CSIR-Network of Institutes for Solar Energy, CSIR-National Physical Laboratory, Dr. K. S. Krishnan Road, New Delhi 110012 (India); Dhar, Ajay, E-mail: adhar@nplindia.org [CSIR-Network of Institutes for Solar Energy, CSIR-National Physical Laboratory, Dr. K. S. Krishnan Road, New Delhi 110012 (India)

2016-05-25

Tin selenide (SnSe) based thermoelectric materials are being explored for making inexpensive and efficient thermoelectric devices with improved thermoelectric efficiency. As both Sn and Se are earth abundant and relatively inexpensive and these alloys do not involve toxic materials, such as lead and expensive tellurium. Hence, in the present study, we have synthesized SnSe doped with 2 at% of aluminium (Al), lead (Pb), indium (In) and copper (Cu) individually, which is not reported in literature. Out of these, Cu doped SnSe resulted in enhancement of figure-of-merit (zT) of ∼0.7 ± 0.02 at 773 K, synthesized employing conventional fusion method followed by spark plasma sintering. This enhancement in zT is ∼16% over the existing state-of-the-art value for p-type SnSe alloy doped with expensive Ag. This enhancement in ZT is primarily due to the presence of Cu{sub 2}Se second phase associated with intrinsic nanostructure formation of SnSe. This enhancement has been corroborated with the microstructural characterization using field emission scanning electron microscopy and X-ray diffraction studies. Also, Cu doped SnSe exhibited a higher value of carrier concentration in comparison to other samples doped with Al, Pb and In. Further, the compatibility factor of Cu doped SnSe alloys exhibited value of 1.62 V{sup −1} at 773 K and it is suitable to segment with most of the novel TE materials for obtaining the higher thermoelectric efficiencies. - Highlights: • Tin selenide (SnSe) doped with non-toxic and inexpensive dopants. • Synthesized highly dense SnSe employing Spark plasma sintering. • Enhanced thermoelectric compatibility factor of SnSe. • Enhanced thermoelectric performance of SnSe doped with Copper.

Thermoelectric transport in superlattices

Energy Technology Data Exchange (ETDEWEB)

Reinecke, T L; Broido, D A

1997-07-01

The thermoelectric transport properties of superlattices have been studied using an exact solution of the Boltzmann equation. The role of heat transport along the barrier layers, of carrier tunneling through the barriers, of valley degeneracy and of the well width and energy dependences of the carrier-phonon scattering rates on the thermoelectric figure of merit are given. Calculations are given for Bi{sub 2}Te{sub 3} and for PbTe, and the results of recent experiments are discussed.

Occupational control of the uranium mine industrial facility in Brazil

International Nuclear Information System (INIS)

Neto, C.A.; Figueiredo, N.; Py, J.; Azevedo, D. de; Torrico, J.M.

1996-01-01

This Occupational Radiation Protection Plan is applied to uranium ore mining and milling, for uranium concentrate production in form of ammonium diuranate (DUA), in 'Complexo Minero-industrial do Planalto de Pocos de Caldas' - CIPC, in 'Caldas', sited in the southwest of Minas Gerais State. The aims of this program are: to estimate the exposure doses of workers by applying dose calculation models; to control the workplace conditions based on monitoring results, variation studies, and to minimize the radiological risks, with available radiation protection resources optimization. The utilized techniques are: talks, area and individual monitoring, individual protection clothes and equipment, use and application of proper conducts in the workplace, according to the radiation protection norms. (authors)

Text Mining Applications and Theory

CERN Document Server

Berry, Michael W

2010-01-01

Text Mining: Applications and Theory presents the state-of-the-art algorithms for text mining from both the academic and industrial perspectives.  The contributors span several countries and scientific domains: universities, industrial corporations, and government laboratories, and demonstrate the use of techniques from machine learning, knowledge discovery, natural language processing and information retrieval to design computational models for automated text analysis and mining. This volume demonstrates how advancements in the fields of applied mathematics, computer science, machine learning

Carbon-Nanotube-Based Thermoelectric Materials and Devices.

Science.gov (United States)

Blackburn, Jeffrey L; Ferguson, Andrew J; Cho, Chungyeon; Grunlan, Jaime C

2018-03-01

Conversion of waste heat to voltage has the potential to significantly reduce the carbon footprint of a number of critical energy sectors, such as the transportation and electricity-generation sectors, and manufacturing processes. Thermal energy is also an abundant low-flux source that can be harnessed to power portable/wearable electronic devices and critical components in remote off-grid locations. As such, a number of different inorganic and organic materials are being explored for their potential in thermoelectric-energy-harvesting devices. Carbon-based thermoelectric materials are particularly attractive due to their use of nontoxic, abundant source-materials, their amenability to high-throughput solution-phase fabrication routes, and the high specific energy (i.e., W g -1 ) enabled by their low mass. Single-walled carbon nanotubes (SWCNTs) represent a unique 1D carbon allotrope with structural, electrical, and thermal properties that enable efficient thermoelectric-energy conversion. Here, the progress made toward understanding the fundamental thermoelectric properties of SWCNTs, nanotube-based composites, and thermoelectric devices prepared from these materials is reviewed in detail. This progress illuminates the tremendous potential that carbon-nanotube-based materials and composites have for producing high-performance next-generation devices for thermoelectric-energy harvesting. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Review on Polymers for Thermoelectric Applications

Directory of Open Access Journals (Sweden)

Mario Culebras

2014-09-01

Full Text Available In this review, we report the state-of-the-art of polymers in thermoelectricity. Classically, a number of inorganic compounds have been considered as the best thermoelectric materials. Since the prediction of the improvement of the figure of merit by means of electronic confinement in 1993, it has been improved by a factor of 3–4. In the mean time, organic materials, in particular intrinsically conducting polymers, had been considered as competitors of classical thermoelectrics, since their figure of merit has been improved several orders of magnitude in the last few years. We review here the evolution of the figure of merit or the power factor during the last years, and the best candidates to compete with inorganic materials. We also outline the best polymers to substitute classical thermoelectric materials and the advantages they present in comparison with inorganic systems.

Effective thermal conductivity in thermoelectric materials

Energy Technology Data Exchange (ETDEWEB)

Baranowski, LL; Snyder, GJ; Toberer, ES

2013-05-28

Thermoelectric generators (TEGs) are solid state heat engines that generate electricity from a temperature gradient. Optimizing these devices for maximum power production can be difficult due to the many heat transport mechanisms occurring simultaneously within the TEG. In this paper, we develop a model for heat transport in thermoelectric materials in which an "effective thermal conductivity" (kappa(eff)) encompasses both the one dimensional steady-state Fourier conduction and the heat generation/consumption due to secondary thermoelectric effects. This model is especially powerful in that the value of kappa(eff) does not depend upon the operating conditions of the TEG but rather on the transport properties of the TE materials themselves. We analyze a variety of thermoelectric materials and generator designs using this concept and demonstrate that kappa(eff) predicts the heat fluxes within these devices to 5% of the exact value. (C) 2013 AIP Publishing LLC.

High Performance High Temperature Thermoelectric Composites with Metallic Inclusions

Science.gov (United States)

Ma, James M. (Inventor); Bux, Sabah K. (Inventor); Fleurial, Jean-Pierre (Inventor); Ravi, Vilupanur A. (Inventor); Firdosy, Samad A. (Inventor); Star, Kurt (Inventor); Kaner, Richard B. (Inventor)

2017-01-01

The present invention provides a composite thermoelectric material. The composite thermoelectric material can include a semiconductor material comprising a rare earth metal. The atomic percent of the rare earth metal in the semiconductor material can be at least about 20%. The composite thermoelectric material can further include a metal forming metallic inclusions distributed throughout the semiconductor material. The present invention also provides a method of forming this composite thermoelectric material.

Domestic uranium mining and milling

International Nuclear Information System (INIS)

Anon.

1983-01-01

A field hearing was held in Riverton, Wyoming on the erosion of the state's uranium industry as production and capital investment have declined and inventories have continued to rise because of a shift to foreign suppliers. The result has been serious unemployment in Wyoming and a decline in uranium mines from 5400 in 1980 to the present 1200. The seven witnesses spoke for the mining industry and state and federal government. Among the issues raised were mining regulations and the cancellation of nuclear rejects which have impacted the health of the industry. Additional statements and a report supplied for the record follow their testimony

Thermoelectric properties of one-dimensional graphene antidot arrays

International Nuclear Information System (INIS)

Yan, Yonghong; Liang, Qi-Feng; Zhao, Hui; Wu, Chang-Qin; Li, Baowen

2012-01-01

We investigate the thermoelectric properties of one-dimensional (1D) graphene antidot arrays by nonequilibrium Green's function method. We show that by introducing antidots to the pristine graphene nanoribbon the thermal conductance can be reduced greatly while keeping the power factor still high, thus leading to an enhanced thermoelectric figure of merit (ZT). Our numerical results indicate that ZT values of 1D antidot graphene arrays can be up to unity, which means the 1D graphene antidot arrays may be promising for thermoelectric applications. -- Highlights: ► We study thermoelectric properties of one-dimensional (1D) graphene antidot arrays. ► Thermoelectric figure of merit (ZT) of 1D antidot arrays can exceed unity. ► ZT of 1D antidot arrays is larger than that of two-dimensional arrays.

Deployable Thermoelectric Metamaterial Energy Harvesting Monitoring System

Data.gov (United States)

National Aeronautics and Space Administration — This project will combine a novel asynchronous monitoring system with the first-of-its-kind thermoelectric metamaterial.  The thermoelectric prototype is constructed...

Mining in Australia

Energy Technology Data Exchange (ETDEWEB)

Shimada, S

1986-01-01

Statistics are given on: 1) Australian dependence on imported raw materials in 1980; 2) production levels in the different mining fields in 1981; 3) trends in the production of minerals over the years 1961-1981. The role of the mining industry in the Australian economy is outlined, and brief details given of its structure. Further statistics are given regarding trends in the production of coal, iron, salt, lead and zinc during the period 1961-1981, together with details of the number of people employed in these industries. Operations at some of the principal mines (coal, iron ore and salt) are outlined and 1983 production figures for all mineral resources are given. 18 refs., 21 figs., 5 tabs.

A potential candidate for the sustainable and reliable domestic energy generation–Thermoelectric cogeneration system

International Nuclear Information System (INIS)

Zheng, X.F.; Yan, Y.Y.; Simpson, K.

2013-01-01

Due to being solid-state, noiseless and maintenance free, thermoelectric devices have found wide applications in different areas since they were discovered over 180 years ago. The applications are concerned with environment-friendly refrigeration and power generation in transportation tools, industrial utilities, military devices, medical services and space applications. It is utilisation of waste heat in varying applications that make the modules particularly attractive. Nevertheless, despite a few academic papers, there has not been extensive use in the domestic sector. A concept of thermoelectric cogeneration system (‘TCS’) is proposed to highlight the direction for enhancing the sustainability by improving the energy efficiency in domestic sector. Compared to the thermoelectric systems used in other areas which only uses the part of converted energy but wastes the unconverted part by dissipating it into the environment, the system presented here maximally recover the available heat by generating electrical power and producing hot water simultaneously. The viability of this system concept is evaluated on a bench-scale experimental prototype. The outputs of electrical power and hot water have been investigated at different temperature difference. The cost saving potential and cost recovery period have been estimated using the available heat sources in domestic sector. The results intend to provide reference for developing the real-scale domestic thermoelectric cogeneration system and show the potential benefits

Environmental Activity of Mining Industry Leaders in Poland in Line with the Principles of Sustainable Development

Directory of Open Access Journals (Sweden)

Justyna Woźniak

2017-11-01

Full Text Available As mining companies reveal more and more public information about themselves, the behaviour fosters a better image. This article aims to present two industry leaders in the context of environmental requirements they have met (status at the end of 2015, acting in compliance with the general principles of a socially responsible business. The choice of KGHM (Kombinat Gorniczo-Hutniczy Miedzi companies (copper ores and other accompanying elements CG PGE (Capital Group Polska Grupa Energetyczna S.A. (lignite was dictated by their significant share in the mining industry in Poland. The environmental aspects of the integrated monthly reports were listed and grouped in detail in accordance with the applicable Global Reporting Initiative (GRI and GRI G4 Mining and Metals guidelines. The values of environmental indicators have been analysed over the years, including inter alia data concerning gas emissions, that is, CO2, SOx, NOx, PM or generated waste and sewage. Also, with regard to the environmental aspect of the work, energy consumption in companies is presented together with the characteristics of the fuel balance. The final part of the article compares the value of the revenues to the budgets of local government units (communes from the operating fee paid by entrepreneurs and expenditures of these municipalities on environmental protection, as additional support by these entities (2013–2015.

Tracing Knowledge Transfer from Universities to Industry: A Text Mining Approach

DEFF Research Database (Denmark)

Woltmann, Sabrina; Alkærsig, Lars

2017-01-01

This paper identifies transferred knowledge between universities and the industry by proposing the use of a computational linguistic method. Current research on university-industry knowledge exchange relies often on formal databases and indicators such as patents, collaborative publications and l...... is the first step to enable the identification of common knowledge and knowledge transfer via text mining to increase its measurability....... and license agreements, to assess the contribution to the socioeconomic surrounding of universities. We, on the other hand, use the texts from university abstracts to identify university knowledge and compare them with texts from firm webpages. We use these text data to identify common key words and thereby...... identify overlapping contents among the texts. As method we use a well-established word ranking method from the field of information retrieval term frequency–inverse document frequency (TFIDF) to identify commonalities between texts from university. In examining the outcomes of the TFIDF statistic we find...

Laser assisted hybrid additive manufacturing of thermoelectric modules

Science.gov (United States)

Zhang, Tao; Tewolde, Mahder; Longtin, Jon P.; Hwang, David J.

2017-02-01

Thermoelectric generators (TEGs) are an attractive means to produce electricity, particular from waste heat applications. However, TEGs are almost exclusively manufactured as flat, rigid modules of limited size and shape, and therefore an appropriate mounting for intimate contact of TEGs modules onto arbitrary surfaces represents a significant challenge. In this study, we introduce laser assisted additive manufacturing method to produce multi-layered thermoelectric generator device directly on flat and non-flat surfaces for waste heat recovery. The laser assisted processing spans from laser scribing of thermal sprayed thin films, curing of dispensed thermoelectric inks and selective laser sintering to functionalize thermoelectric materials.

Development in Zn4Sb-based thermoelectric materials

DEFF Research Database (Denmark)

Yin, Hao

or thermopower,  the electrical conductivity, the thermal conductivity and T the absolute temperature. The best thermoelectrics are heavily doped semiconductors with high thermoelectric power factors and low thermal conductivities, known as “Phonon Glasses Electrical Crystals”. Zn4Sb3 is one such material......-section. The following part reports the effect of nano-particles on the thermoelectric properties and thermal stability of Zn4Sb3. Though TiO2 nano particles have remarkably enhanced the stability, the thermoelectric performance of all the nano-composites deteriorates. Optimization of the content of the nano...

Score Mining Rents in Terms of Investment Attractiveness of Peat Mining

Science.gov (United States)

Alexandrov, Gennady; Yablonev, Alexander

2017-11-01

In this article, as determinants in the system factors underlying the investment attractiveness of the peat industry is considered a rental factor, which predetermines the significant differences and peculiarities of the investment climate in the mining business and, in particular, in the sphere of peat mining. In contrast to modern studies treated the essence and role of rents in the economic mechanism, is proposed for a new approach to solving the problems of its formation. Our approach differs in that it, firstly, adequate rental relations, objectively in extractive industries, secondly, provides consensus in the interests of the owner of peat deposits and entrepreneurs, businesses in these deposits and, thus, thirdly, contributes to the creation of a favourable investment climate in the peat extraction industry. In practical terms, in accordance with the proposed approach, we have proposed specific allocation algorithm of mining rents from the profits of peat extraction enterprises.

Question marks of the Czech coal mining industry

International Nuclear Information System (INIS)

Dopita, M.; Pesek, J.

1995-01-01

An overview of brown and black coal mining in the Czech Republic is presented, and problems of the extent of coal reserves and of the profitability of deep black coal mining are discussed. Costs of coal mining in foreign countries are given. Coal mining in the Czech Republic can be expected to be loss-making unless coal prices are increased. Since coal resources in the Czech Republic are limited, additional nuclear power plants will have to be constructed or else coal for power generation will have to be imported. The environmental aspects of coal mining and burning are discussed. Medium-term and long-term solutions to reduce the environmental burden include thermal power plant desulfurization, application of the fluidized-bed combustion regime to coals with large ash and/or sulfur contents, and introduction of gas in towns and power plants. In the short run, large-scale consumers in towns and coal basins should be obliged to accumulate reserves of low-sulfur coal for later use. (J.B.). 2 tabs., 3 figs., 8 refs

1998 mines and quarries guidebook

International Nuclear Information System (INIS)

1998-01-01

The 1998 edition of the mines and quarries guidebook provides: a comprehensive overview of mining activities in France and French-speaking countries relative to coal, uranium, non-ferrous ores and metals, industrial minerals, lime, limestone, silica, cermet and saline minerals; a list of recycling companies; a list of quarries and building material exploitations (organisational structure of main companies, granulates, cement industry, gypsum, plaster, tiles, bricks, stones..); a list and coordinates by department of more than 1400 quarries with the material exploited; an inventory of mining exploitations of Belgium, Switzerland and French speaking countries of Africa, a listing and organisational structure of research and engineering centres and administrations; an alphabetical and analytical repertory of more than 700 supplying companies of the mineral industry; and the status, organization and members of the mineral industry society. (J.S.)

Silicon nanowire networks for multi-stage thermoelectric modules

International Nuclear Information System (INIS)

Norris, Kate J.; Garrett, Matthew P.; Zhang, Junce; Coleman, Elane; Tompa, Gary S.; Kobayashi, Nobuhiko P.

2015-01-01

Highlights: • Fabricated flexible single, double, and quadruple stacked Si thermoelectric modules. • Measured an enhanced power production of 27%, showing vertical stacking is scalable. • Vertically scalable thermoelectric module design of semiconducting nanowires. • Design can utilize either p or n-type semiconductors, both types are not required. • ΔT increases with thickness therefore power/area can increase as modules are stacked. - Abstract: We present the fabrication and characterization of single, double, and quadruple stacked flexible silicon nanowire network based thermoelectric modules. From double to quadruple stacked modules, power production increased 27%, demonstrating that stacking multiple nanowire thermoelectric devices in series is a scalable method to generate power by supplying larger temperature gradient. We present a vertically scalable multi-stage thermoelectric module design using semiconducting nanowires, eliminating the need for both n-type and p-type semiconductors for modules

Compatibility approach for the improvement of oxide thermoelectric converters for industrial heat recovery applications

Science.gov (United States)

Saucke, Gesine; Populoh, Sascha; Thiel, Philipp; Xie, Wenjie; Funahashi, Ryoji; Weidenkaff, Anke

2015-07-01

New ceramic Ca3Co3.9O9+δ /CaMn0.97W0.03O3-δ thermoelectric generators with different cross section areas A p and A n of the p- and the n-type leg are fabricated, characterized, and tested at high temperatures in long-term tests. The variation of the measured power output and the efficiency with changing A p / A n ratio is discussed and compared with calculations based on the measured material properties. The highest conversion efficiencies are reached for ratios close to the one predicted by the compatibility approach, whereas an improper choice of A p / A n leads to a strong reduction of the efficiency. A volume power density of 1.4 W/cm3 and an efficiency of 1.08% are found for the most promising generator (temperature difference Δ T = 734 K and A p / A n = 1.12). The results reveal the major importance of the A p / A n ratio for the conversion efficiency and subsequently cost and weight reduction issues, both crucial for a large scale application of thermoelectric converters. Additionally, the oxide generators proved to be very reliable, as after more than 110 h of high temperature energy conversion, no degradation is observable.

High thermoelectric performance of graphite nanofibers.

Science.gov (United States)

Tran, Van-Truong; Saint-Martin, Jérôme; Dollfus, Philippe; Volz, Sebastian

2018-02-22

Graphite nanofibers (GNFs) have been demonstrated to be a promising material for hydrogen storage and heat management in electronic devices. Here, by means of first-principles and transport simulations, we show that GNFs can also be an excellent material for thermoelectric applications thanks to the interlayer weak van der Waals interaction that induces low thermal conductance and a step-like shape in the electronic transmission with mini-gaps, which are necessary ingredients to achieve high thermoelectric performance. This study unveils that the platelet form of GNFs in which graphite layers are perpendicular to the fiber axis can exhibit outstanding thermoelectric properties with a figure of merit ZT reaching 3.55 in a 0.5 nm diameter fiber and 1.1 in a 1.1 nm diameter one. Interestingly, by introducing 14 C isotope doping, ZT can even be enhanced up to more than 5, and more than 8 if we include the effect of finite phonon mean free path, which demonstrates the amazing thermoelectric potential of GNFs.

Metal-containing residues from industry and in the environment: geobiotechnological urban mining.

Science.gov (United States)

Glombitza, Franz; Reichel, Susan

2014-01-01

This chapter explains the manifold geobiotechnological possibilities to separate industrial valuable metals from various industrial residues and stored waste products of the past. In addition to an overview of the different microbially catalyzed chemical reactions applicable for a separation of metals and details of published studies, results of many individual investigations from various research projects are described. These concern the separation of rare earth elements from phosphorous production slags, the attempts of tin leaching from mining flotation residues, the separation of metals from spent catalysts, or the treatment of ashes as valuable metal-containing material. The residues of environmental technologies are integrated into this overview as well. The description of the different known microbial processes offers starting points for suitable and new technologies. In addition to the application of chemolithoautotrophic microorganisms the use of heterotrophic microorganisms is explained.

Development trends in the Lusatian brown coal mining industry

International Nuclear Information System (INIS)

Schwirten, D.

1994-01-01

Lusatia has lived on and with brown coal for over 200 years. Brown coal changed what was once a region in which forestry and agriculture predominated into an industrial region. Thanks to its good combustion properties and high energy yield brown coal very soon became known and popular. It was always the driving force for a rapid development which resulted in an economically sound and technically up-to-date industry in Lusatia. This powerful status of brown coal was however soon exploited for aims which were bound to lead to the downfall of two social structures (during the years from 1933 to 1990) by reason of a regime of unconditional autarchy. The economic and technical development thus initiated certainly brought many advantages, but it also had serious diadvantages. Constant increases in production, as a result of which planned rated outputs were intentionally disregarded, were the rule because production targets had to be met or exceeded. Economic inefficiency led to a scarcity of labour and a shortage of finances. Environmental aims had no priority since production was the absolute, primary objective. Consequently, this regime of economic autarchy ended in an one-way street as far as industry was concerned, a situation which was accompanied by an unexampled destruction of the natural basic living conditions and direct, threatening health hazards to man and nature. The year 1990 saw the beginning of the transition from planned controlled economy to free market economy. The reorganization of the former large combines as corporations was not however merely a formal change, but internally also represented a transformation. The brown coal mining industry manifested its new intention and determination to be economically competitive and unsubsidized in future, to operate in such a way as to be compatible with the environment and to exploit reserves carefully, as well as to render its activities socially compatible. (orig.) [de

Work-home interaction of employees in the mining industry

Directory of Open Access Journals (Sweden)

Karina Mostert

2011-08-01

Full Text Available This study aimed to test the construct validity, factorial invariance and reliability of the Survey Work-Home Interaction-NijmeGen (SWING and to explore whether and how the work-home interaction of various socio-demographic groups differ. Random samples (n = 320 were taken of employees in the mining industry. The confirmatory factor analysis results supported the proposed four-factor structure measuring negative/positive work-home interference and negative/positive home-work interference. The multi-group invariance analyses’ results for two language and ethnic groups also supported the factorial invariance of the SWING. All the scales were found to be reliable. Statistically significant differences in work-home interaction were found, based on age, ethnicity, gender, education, marital status, parental status, language, flexibility at work and individuals who had a partner with a paid job.

Lean Maintenance Applied to Improve Maintenance Efficiency in Thermoelectric Power Plants

OpenAIRE

Orlando Duran; Andrea Capaldo; Paulo Andrés Duran Acevedo

2017-01-01

Thermoelectric power plants consist of a set of critical equipment that require high levels of availability and reliability. Due to this, maintenance of these physical assets is gaining momentum in industry. Maintenance is considered as an activity that contributes to improving the availability, efficiency and productivity of each piece of equipment. Several techniques have been used to achieve greater efficiencies in maintenance, among which we can find the lean maintenance philosophy. Despi...

Industrial wastewater treatment using higher aquatic vegetation in the former mining company of the Far Eastern Federal district

Science.gov (United States)

Krupskaya, L. T.; Zvereva, V. P.; Gula, K. E.; Gul', L. P.; Golubev, D. A.; Filatova, M. Yu.

2017-09-01

The article describes the results of studying the problems of industrial wastewater treatment using higher aquatic vegetation (hydrophytes) in the former mining enterprise of the Far Eastern Federal District (FEFD). They are aimed at reducing the negative environment impact of toxic tin ore wastes. The material of research were drainage, mine and slime waters as well as Lemna minor and Common reed grass (Phragmites communis). In the work conventional modern physico-chemical, chemical, biological and mathematical-statistical methods were used, as well as in the process of research the methods of atomic absorption spectrophotometry for AAS and mass spectrometry with inductively coupled plasma on ISP-MS ELASN DRS II PerkinElmer was applied. The data obtained in the course of the experiment (2015-2016), indicate that a degree of wastewater treatment, using Lemna minor, is high. Virtually, all compounds of toxic chemical elements contained in industrial wastewater (zinc, cobalt, nickel, cadmium, iron, manganese, lead, etc.) were fully absorbed by a hydrophyte. Pollutant extraction was almost 95%. The obtained results of the study in laboratory conditions proved the possibility of effective use of the Lemna minor for the purification of drainage and mine waters. A key contribution of this paper is the relationship between possible toxic metals contained in industrial wastewater and a higher degree of absorption by their higher aquatic vegetation. These hydrophytes absorb these possible toxic metals in an aqueous medium and are contaminated with these heavy metals.

Responsible Mining—The Impact of the Mining Industry in Poland on the Quality of Atmospheric Air

Directory of Open Access Journals (Sweden)

Justyna Woźniak

2018-04-01

Full Text Available This article addresses issues of air pollutant emissions by Polish mining industry leaders in the light of corporate social responsibility policy: Kombinat Górniczo-Hutniczy Miedzi Polska Miedź S.A. (KGHM, Polska Grupa Energetyczna S.A. (PGE. The Corporate Social Responsibility (CSR initiative regulates business activities at the level of environmental and social responsibility. Given the location of the “emission activities”, the level of pollutants (SOx, NOx, PMx generated by selected entities in the capital group over the years has been analysed. The aim of the article is to disclose relevant data on the emission reduction of entities as an expression of the actions of taking care of the environment and social protection. Evaluation of the extractive industry in the context of only interventions in the environment without emphasizing the economic and social significance is biased. Therefore, the level of emissivity of the whole economy has been verified against the background of the European Union. The article highlights the importance of coal power in two contexts: the production of electricity based on that fuel in controlled industrial installations and the uncontrolled use of coal in the municipal economy as a problem with a greater nuisance and impact on the quality of inhaled air. Analyses have shown that the widely understood mining industry is still a source of pollution, but power plants and processing plants have significantly reduced the volume of emissions over the years.

Ambient air quality at the wider area of an industrial mining facility at Stratoni, Chalkidiki, Greece.

Science.gov (United States)

Gaidajis, Georgios; Angelakoglou, Komninos; Gazea, Emmy

2012-01-01

To assess ambient air quality at the wider area of a mining-industrial facility in Chalkidiki, Greece, the particulate matter with an aerodynamic diameter of 10 μm (PM(10)) and its content in characteristic elements, i.e., As, Cd, Cu, Fe, Mn, Pb, Zn were monitored for a period of three years (2008-2010). Gravimetric air samplers were employed for the particulate matter sampling at three sampling stations located in the immediate vicinity of the industrial facility and at a neighbouring residential site. Monitoring data indicated that the 3-year median PM(10) concentrations were 23.3 μg/m(3) at the residential site close to the facility and 28.7 μg/m(3) at the site within the facility indicating a minimal influence from the industrial activities to the air quality of the neighbouring residential area. Both annual average and median PM(10) concentration levels were below the indicative European standards, whereas similar spatial and temporal variation was observed for the PM(10) constituents. The average Pb concentrations measured for the three sampling sites were 0.2, 0.146 and 0.174 μg/m(3) respectively, well below the indicative limit of 0.5 μg/m(3). The quantitative and qualitative comparison of PM(10) concentrations and its elemental constituent for the three sampling stations did not indicate any direct influence of the mining-industrial activities to the air quality of the Stratoni residential area.

Partnership in mining

Energy Technology Data Exchange (ETDEWEB)

Haslam, R

1988-04-01

This paper discusses the benefits resulting from mutual cooperation and information exchange between the UK and USA coal industries. The aim of this cooperation is to promote safe and efficient extraction and profitable use of coal. Advanced mining technologies and mechanisation of the coal mines are some of the results of research cooperation between British Coal and the US Bureau of Mines. In addition, Britain has studied and put into good use the management styles, working practices and pay structure, and mining engineering adopted in the USA.

Mining toward the year 2000

International Nuclear Information System (INIS)

Anon.

1981-01-01

Mining in South Africa to this present day has not been a case of dramatic development, rather a steady technical progress, assisted by a rising product market price. Prominent men in the mining industry look at the future in terms of that logical development. Coverage is given to gold, mine unionization, coal, rock bursts, ventilation, uranium and ocean mining

Mining royalties and the implications of the Northern Territory Green Paper for the Australian mining industry

International Nuclear Information System (INIS)

Garnaut, R.

1982-01-01

The 1981 Green Paper on Mining Royalty Policy for the Northern Territory is a significant landmark in the evolution of fiscal policy in relation to mining in Australia. However, as with mining on Aboriginal land, the Green Paper and the new Royalties Bill have not settled fiscal policy in relation to uranium mining. The Commonwealth still, although presumably temporarily, retains the power to set and to collect royalties on uranium mining. The coincidence that places the most valuable known uranium deposits on Aboriginal land further increases uncertainty about fiscal policy

Geochemistry and uranium content of phosphorites used in fertilizer industry - Homs in comparison with mines raw phosphorites

International Nuclear Information System (INIS)

Kudsi, Yahia; Abbas, Mahmoud

1992-03-01

geochemical characteristics of phosphates used in fertilizer industry at Homs were studied. 28 monthly averaged samples from Palmyrides mining areas were mineralogically and chemically analyzed for P 2 O 5 , CaO and U. Specifically, U content was determined by fluorometry, x-ray fluorescence and γ spectrometry. Results show that the phosphates under study are similar to that exploited at Charquieh mines. U shows a positive correlation with P 2 O 5 and not with CaO. Statistical analyses indicate that fluorometry is more accurate than x-ray fluorescence and γ spectrometry. (author). 14 refs., 23 figs., 5 tabs

Portable Thermoelectric Power Generator Coupled with Phase Change Material

Directory of Open Access Journals (Sweden)

Lim Chong C.

2014-07-01

Full Text Available Solar is the intermittent source of renewable energy and all thermal solar systems having a setback on non-functioning during the night and cloudy environment. This paper presents alternative solution for power generation using thermoelectric which is the direct conversion of temperature gradient of hot side and cold side of thermoelectric material to electric voltage. Phase change material with latent heat effect would help to prolong the temperature gradient across thermoelectric material for power generation. Besides, the concept of portability will enable different power source like solar, wasted heat from air conditioner, refrigerator, stove etc, i.e. to create temperature different on thermoelectric material for power generation. Furthermore, thermoelectric will generate direct current which is used by all the gadgets like Smartphone, tablet, laptop etc. The portable concept of renewable energy will encourage the direct usage of renewable energy for portable gadgets. The working principle and design of portable thermoelectric power generator coupled with phase change material is presented in this paper.

Mining in Austria in 1992

International Nuclear Information System (INIS)

Moser, P.

1994-01-01

The mineral production of Austria, in 1992 - as far as under the supervision of the Austrian Mine Inspectorate, run up to about 50 million t of solid minerals, 1.2 million t of oil and 1.4 billion m 3 of natural gas. 88% of the solid minerals comprised industrial minerals, 4% metals, 4% salt and 4% coal. The solid minerals were produced by 352 open pits and 15 underground mines. 3 of the operations worked both on surface and underground and one mine is a well field operation. In total around 8000 people were employed in the field of mining and mineral processing. The minerals produced represent a value of about 15 billion Austrian Schillings (about 1.25 billion US $), the major part being the industrial minerals sector with a share of 7 billion Austrian Schillings and oil and gas with around 4 billion Austrian Schillings. The industrial minerals sector does not play only in Austrian an important role, but contributes also remarkably to the world production. This comprises mainly magnesite, talc, kaolin and graphite where Austria produces more than 1% of the world production. Summarizing, it can be said that the future of the Austrian mining sector is quite prosperous, perhaps better than in some other traditional mining countries in Europe, where the change from the coal and base metals sector towards the industrial sector has not come so far. (orig.) [de

Thermoelectric and mechanical properties of spark plasma sintered Cu3SbSe3 and Cu3SbSe4: Promising thermoelectric materials

Science.gov (United States)

Tyagi, Kriti; Gahtori, Bhasker; Bathula, Sivaiah; Toutam, Vijaykumar; Sharma, Sakshi; Singh, Niraj Kumar; Dhar, Ajay

2014-12-01

We report the synthesis of thermoelectric compounds, Cu3SbSe3 and Cu3SbSe4, employing the conventional fusion method followed by spark plasma sintering. Their thermoelectric properties indicated that despite its higher thermal conductivity, Cu3SbSe4 exhibited a much larger value of thermoelectric figure-of-merit as compared to Cu3SbSe3, which is primarily due to its higher electrical conductivity. The thermoelectric compatibility factor of Cu3SbSe4 was found to be ˜1.2 as compared to 0.2 V-1 for Cu3SbSe3 at 550 K. The results of the mechanical properties of these two compounds indicated that their microhardness and fracture toughness values were far superior to the other competing state-of-the-art thermoelectric materials.

76 FR 589 - Proposed Extension of Existing Information Collection; Mine Accident, Injury, Illness, Mine...

Science.gov (United States)

2011-01-05

... requires mine operators and independent contractors to immediately notify MSHA in the event of an accident... provides for uniform information gathering across the mining industry. Section 50.30 requires mine... types. These rates are used to analyze trends and to assess the degree of success of the health and...

Public health implications of changing patterns of recruitment into the South African mining industry, 1973-2012: a database analysis.

Science.gov (United States)

Ehrlich, Rodney; Montgomery, Alex; Akugizibwe, Paula; Gonsalves, Gregg

2017-08-03

The triple epidemic of silicosis, tuberculosis and HIV infection among migrant miners from South Africa and neighbouring countries who have worked in the South African mining industry is currently the target of regional and international control efforts. These initiatives are hampered by a lack of information on this population. This study analysed the major South African mining recruitment database for the period 1973 to 2012 by calendar intervals and demographic and occupational characteristics. Changes in area of recruitment were mapped using a geographic information system. The database contained over 10 million contracts, reducible to 1.64 million individuals. Major trends relevant to health projection were a decline in gold mining employment, the major source of silicosis; increasing recruitment of female miners; and shifts in recruitment from foreign to South African miners, from the Eastern to the Northwestern parts of South Africa, and from company employees to contractors. These changes portend further externalisation of the burden of mining lung disease to home communities, as miners, particularly from the gold sector, leave the industry. The implications for health, surveillance and health services of the growing number of miners hired as contractors need further research, as does the health experience of female miners. Overall, the information in this report can be used for projection of disease burden and direction of compensation, screening and treatment services for the ex-miner population throughout Southern Africa.

Aspects of radiation safety in the tin mining and processing industries in Malaysia

Energy Technology Data Exchange (ETDEWEB)

Giles, M S

1987-04-01

This study was undertaken at the request of the Malaysian nuclear regulatory authorities with the following objectives: to examine the individual steps in the mining, beneficiation, by-product treatment and smelting of tin-bearing minerals so as to highlight possible radiation safety effects and radiological environmental impacts; to make preliminary measurements on operations which are representative of the various steps in the processing of these minerals so as to determine the type and extent of future radiological survey programs; to examine the need for specific measurement techniques with a view to determining future training requirements. A representative operation of each of the steps in the tin mining and processing industry was visited, measurements were made and samples were collected to assess both the in-plant safety and offsite environmental effects of the operation. The results of measurements of gamma dose-rates, radon daughters-in-air, thoron daughters-in-air and radioactive respirable dusts are presented.

Problems of accounting, cost concerns and economic analysis in the mining enrichment industry

Energy Technology Data Exchange (ETDEWEB)

Slabinskiy, V T

1980-01-01

Mining enrichment enterprises of the ferrous and nonferrous metallurgy, coal and chemical industry have much in common in the area of technology of production, technical base, organization of labor and production. This in turn presupposes the possible development of a common procedure of accounting of expenditures for production, calculation of net cost of output and analysis of production-economic activity of enterprises. Based on scientific research and generalization of advanced experience of practical workers, means of improvement of economic operation in mining enrichment enterprises are outlined according to increasing demands of production control. An outline of analytic accounting of expenditures which provides for multitarget use of information has been developed: for organization of operational control of the formulation of net cost of output, determination of the results of self support activities of structural subdivisions of an enterprise, computation of the efficiency of scientific and technical progress. Experience of use of economic and mathematical methods in computers for this purpose is discussed.

Improvement In The COP Of Thermoelectric Cooler

Directory of Open Access Journals (Sweden)

Jatin Patel

2015-08-01

Full Text Available This paper described the study for heat transfer through thermoelectric cooler TEC by use of multistage thermoelectric module. To satisfy the heat dissipation of modern electronic element thermal designers have to increase fin area and fan speed to improve its cooling capacity. However the increase of fin area is restricted by the space. Besides the increase of fan speed would induce noise which damages human health. So air cooling by fan is hardly to meet the requirement of modern electronic component. Recently thermoelectric cooler TEC is applied to electronic cooling with the advantages of small size quietness and reliability. A typical thermoelectric cooler consists of p-type and n-type semiconductor pellets connected electrically in series and sandwiched between two ceramic substrates. Whenever direct current passes through the circuit it causes temperature differential between TEC sides. As a result one face of TEC which is called cold side will be cooled while its opposite face which is called hot side is simultaneously heated. The main problem over the use of TEC is the limited COP and its thermal performance. But these can be eliminated by use of multistage thermoelectric cooler.

a study of gold mining industry in ghana

African Journals Online (AJOL)

PUBLICATIONS1

is the case of Ghana. The abstract of the ... and tax waivers for foreign mining companies amount to millions ... it provides a rich re- view of literature where the legal ramifications ..... ciplinary research: gold mining is a double edged sword, and ...

Strain-induced bi-thermoelectricity in tapered carbon nanotubes

Science.gov (United States)

Algharagholy, L. A. A.; Pope, T.; Lambert, C. J.

2018-03-01

We show that carbon-based nanostructured materials are a novel testbed for controlling thermoelectricity and have the potential to underpin the development of new cost-effective environmentally-friendly thermoelectric materials. In single-molecule junctions, it is known that transport resonances associated with the discrete molecular levels play a key role in the thermoelectric performance, but such resonances have not been exploited in carbon nanotubes (CNTs). Here we study junctions formed from tapered CNTs and demonstrate that such structures possess transport resonances near the Fermi level, whose energetic location can be varied by applying strain, resulting in an ability to tune the sign of their Seebeck coefficient. These results reveal that tapered CNTs form a new class of bi-thermoelectric materials, exhibiting both positive and negative thermopower. This ability to change the sign of the Seebeck coefficient allows the thermovoltage in carbon-based thermoelectric devices to be boosted by placing CNTs with alternating-sign Seebeck coefficients in tandem.

Development of Perovskite-Type Materials for Thermoelectric Application

Directory of Open Access Journals (Sweden)

Tingjun Wu

2018-06-01

Full Text Available Oxide perovskite materials have a long history of being investigated for thermoelectric applications. Compared to the state-of-the-art tin and lead chalcogenides, these perovskite compounds have advantages of low toxicity, eco-friendliness, and high elemental abundance. However, because of low electrical conductivity and high thermal conductivity, the total thermoelectric performance of oxide perovskites is relatively poor. Variety of methods were used to enhance the TE properties of oxide perovskite materials, such as doping, inducing oxygen vacancy, embedding crystal imperfection, and so on. Recently, hybrid perovskite materials started to draw attention for thermoelectric application. Due to the low thermal conductivity and high Seebeck coefficient feature of hybrid perovskites materials, they can be promising thermoelectric materials and hold the potential for the application of wearable energy generators and cooling devices. This mini-review will build a bridge between oxide perovskites and burgeoning hybrid halide perovskites in the research of thermoelectric properties with an aim to further enhance the relevant performance of perovskite-type materials.

Solution of problems, emerging with the transition to thin seams mining on underground mines

International Nuclear Information System (INIS)

Malkin, A.S.; Podshivalov, V.E.; Zhdamirov, V.M.; Kostarev, A.P.; Kulakov, A.N.; Savchenkov, V.E.

1997-01-01

The greatest volume of useful carbon-energetical and carbon-technological resources in the countries of the world consists of coal. Most likely, problems of the development of coal wining technology and coal consumption will interest scientists and mining engineers for a long time. Moreover, competing with the petroleum and gas industries becomes increasingly difficult. Considerable increases in coal production in countries with warm climates, and favourable mining and geological conditions also damages the international market for the coal industries of Russia (and Australia, India, and Vietnam). In a situation of critical deficits in both financial and material means in Russia, it is necessary to change the structure of the means of production and investment policies for the development of coal mining at every individual mine. 1 fig

Thermoelectric Performance of Na-Doped GeSe

NARCIS (Netherlands)

Shaabani, Laaya; Aminorroaya-Yamini, Sima; Byrnes, Jacob; Akbar Nezhad, Ali; Blake, Graeme R

2017-01-01

Recently, hole-doped GeSe materials have been predicted to exhibit extraordinary thermoelectric performance owing largely to extremely low thermal conductivity. However, experimental research on the thermoelectric properties of GeSe has received less attention. Here, we have synthesized

Robotics for mining control

Energy Technology Data Exchange (ETDEWEB)

1986-11-01

In 1982 surveys of the mining industry revealed no applications of robotics existed and none were planned. This report provides a general overview of automation in the mining industry since this point in time. Roof control electronics, gas monitoring, jumbo drill automation, remote and sensor- controlled continuous miners, automated trolley trucks, roof bolting and screening machines are examples of technology available today. The report concludes with recommendations as to six potential research areas. 25 refs.

Education Roadmap for Mining Professionals

Energy Technology Data Exchange (ETDEWEB)

none,

2002-12-01

This document represents the roadmap for education in the U.S. mining industry. It was developed based on the results of an Education Roadmap Workshop sponsored by the National Mining Association in conjunction with the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held February 23, 2002 in Phoenix, Arizona.

Integrating Industrial Ecology Thinking into the Management of Mining Waste

Directory of Open Access Journals (Sweden)

Éléonore Lèbre

2015-10-01

Full Text Available Mining legacies are often dominated by large waste facilities and their associated environmental impacts. The most serious environmental problem associated with mine waste is heavy metals and acid leakage through a phenomenon called acid mine drainage (AMD. Interestingly, the toxicity of this leakage is partly due to the presence of valuable metals in the waste stream as a result of a diversity of factors influencing mining operations. A more preventive and recovery-oriented approach to waste management, integrated into mine planning and operations, could be both economically attractive and environmentally beneficial since it would: mitigate environmental impacts related to mine waste disposal (and consequently reduce the remediation costs; and increase the resource recovery at the mine site level. The authors argue that eco-efficiency and resilience (and the resulting increase in a mine’s lifetime are both critical—yet overlooked—characteristics of sustainable mining operations. Based on these arguments, this paper proposes a framework to assist with identification of opportunities for improvement and to measure this improvement in terms of its contribution to a mine’s sustainability performance.

Acid mine drainage neutralization in a pilot sequencing batch reactor using limestone from a paper and pulp industry

CSIR Research Space (South Africa)

Vadapalli, VRK

2015-10-01

Full Text Available This study investigated the implications of using two grades of limestone from a paper and pulp industry for neutralization of acid mine drainage (AMD) in a pilot sequencing batch reactor (SBR). In this regard, two grades of calcium carbonate were...

Future needs for improvement of noise-induced hearing loss awareness training and hearing protection device practices in the South African mining industry

CSIR Research Space (South Africa)

Edwards, AL

2012-08-01

Full Text Available ) in order to identify the future needs of the industry with regards to improvement of NIHL awareness training to target audiences in the mining industry. This paper outlines the results of the study that interviewed 143 employees from a wide range...

Pumps in mining

Energy Technology Data Exchange (ETDEWEB)

1979-01-01

This article looks at the pump industry as a whole, its historical links with the mining industry, their parallel develop ment, and at the individual manufacturers and pumps, services and auxillary products they have to offer.

Optimized Design of Thermoelectric Energy Harvesting Systems for Waste Heat Recovery from Exhaust Pipes

Directory of Open Access Journals (Sweden)

Marco Nesarajah

2017-06-01

Full Text Available With the increasing interest in energy efficiency and resource protection, waste heat recovery processes have gained importance. Thereby, one possibility is the conversion of the heat energy into electrical energy by thermoelectric generators. Here, a thermoelectric energy harvesting system is developed to convert the waste heat from exhaust pipes, which are very often used to transport the heat, e.g., in automobiles, in industrial facilities or in heating systems. That is why a mockup of a heating is built-up, and the developed energy harvesting system is attached. To build-up this system, a model-based development process is used. The setup of the developed energy harvesting system is very flexible to test different variants and an optimized system can be found in order to increase the energy yield for concrete application examples. A corresponding simulation model is also presented, based on previously developed libraries in Modelica®/Dymola®. In the end, it can be shown—with measurement and simulation results—that a thermoelectric energy harvesting system on the exhaust pipe of a heating system delivers extra energy and thus delivers a contribution for a more efficient usage of the inserted primary energy carrier.

Nonlinear thermoelectric effects in high-field superconductor-ferromagnet tunnel junctions

Directory of Open Access Journals (Sweden)

Stefan Kolenda

2016-11-01

Full Text Available Background: Thermoelectric effects result from the coupling of charge and heat transport and can be used for thermometry, cooling and harvesting of thermal energy. The microscopic origin of thermoelectric effects is a broken electron–hole symmetry, which is usually quite small in metal structures. In addition, thermoelectric effects decrease towards low temperatures, which usually makes them vanishingly small in metal nanostructures in the sub-Kelvin regime.Results: We report on a combined experimental and theoretical investigation of thermoelectric effects in superconductor/ferromagnet hybrid structures. We investigate the dependence of thermoelectric currents on the thermal excitation, as well as on the presence of a dc bias voltage across the junction.Conclusion: Large thermoelectric effects are observed in superconductor/ferromagnet and superconductor/normal-metal hybrid structures. The spin-independent signals observed under finite voltage bias are shown to be reciprocal to the physics of superconductor/normal-metal microrefrigerators. The spin-dependent thermoelectric signals in the linear regime are due to the coupling of spin and heat transport, and can be used to design more efficient refrigerators.

Heat stress management in hot mines

CSIR Research Space (South Africa)

Schutte, P

2009-09-01

Full Text Available consequences of excessive levels of occupational heat stress were recognized by the South African gold mining industry when the first death from heat stroke occurred in 1924 (1). Steps to combat the heat stress hazard were taken almost immediately... currently used in the South African mining industry. In South African mines, work environments having a wet-bulb temperature in excess of 27.4 °C are considered to be ‘hot’ and necessitate the introduction of practices to safeguard miners...

Taxation on mining and hydrocarbon investments

Directory of Open Access Journals (Sweden)

Beatriz De La Vega Rengifo

2014-07-01

Full Text Available This article comments the most important aspects of the tax treatment applicable to investments of mining and oil and gas industry. The document highlights the relevant tax topics of the general tax legislation(Income Tax Law and the special legislation of both industries (General Mining Law and Hydrocarbons Organic Law.

WIRELESS MINE WIDE TELECOMMUNICATIONS TECHNOLOGY

International Nuclear Information System (INIS)

Zvi H. Meiksin

2002-01-01

Two industrial prototype units for through-the-earth wireless communication were constructed and tested. Preparation for a temporary installation in NIOSH's Lake Lynn mine for the through-the-earth and the in-mine system were completed. Progress was made in the programming of the in-mine system to provide data communication. Work has begun to implement a wireless interface between equipment controllers and our in-mine system

Fuelcell-Hybrid Mine loader (LHD)

Energy Technology Data Exchange (ETDEWEB)

James L Dippo; Tim Erikson; Kris Hess

2009-07-10

The fuel cell hybrid mine loader project, sponsored by a government-industry consortium, was implemented to determine the viability of proton exchange membrane (PEM) fuel cells in underground mining applications. The Department of Energy (DOE) sponsored this project with cost-share support from industry. The project had three main goals: (1) to develop a mine loader powered by a fuel cell, (2) to develop associated metal-hydride storage and refueling systems, and (3) to demonstrate the fuel cell hybrid loader in an underground mine in Nevada. The investigation of a zero-emissions fuel cell power plant, the safe storage of hydrogen, worker health advantages (over the negative health effects associated with exposure to diesel emissions), and lower operating costs are all key objectives for this project.

Estimation of quantitative levels of diesel exhaust exposure and the health impact in the contemporary Australian mining industry

NARCIS (Netherlands)

Peters, Susan; de Klerk, Nicholas; Reid, Alison; Fritschi, Lin; Musk, Aw Bill; Vermeulen, Roel

2017-01-01

OBJECTIVES: To estimate quantitative levels of exposure to diesel exhaust expressed by elemental carbon (EC) in the contemporary mining industry and to describe the excess risk of lung cancer that may result from those levels. METHODS: EC exposure has been monitored in Western Australian miners

in remediating acid mine drainage

African Journals Online (AJOL)

The management and treatment of contaminated mine water is one of the most urgent problems facing the South African mining industry. The cost advantage of permeable reactive barriers (PRBs) has seen their increased application as means of passively treating mine drainage. A PRB is built by placing a reactive material ...

An analysis of workers' morale in the coal mining industry using principal component analysis

Energy Technology Data Exchange (ETDEWEB)

Armstrong, J; La Court, C; Pearson, J M

1987-03-01

This paper looks at labour morale in the coal mining industry from 1967 to 1984. In particular it examines absenteeism, turnover and accidents over that period, as well as constructing an index of morale based on these variables. The data are taken from the North Nottinghamshire and South Yorkshire coal areas, and a comparison is made between these areas in the period leading up to the industrial action in 1984/85. The indices constructed indicate that morale, as measured by the first principal component, increased considerably during the years before the 1984 industrial dispute and that low morale was an unlikely reason for the dispute, although morale in South Yorkshire, a strike area, was lower than in North Nottinghamshire, largely a non-strike area. The steep rise in morale in both North Nottinghamshire and South Yorkshire follows closely the rise in unemployment nationally and may simply be an indication of conventional industrial relations assumptions that manifestations of negative worker attitudes are greatest when jobs are relatively plentiful, and considerably less so when jobs are scarce.

Siemens' innovative role in mining technology

Energy Technology Data Exchange (ETDEWEB)

1990-07-01

The growth of the mining industry in South Africa has played a decisive role in the industrial development of the country. As mining activities expanded, the need for energy production increased and as of late mining is becoming more mechanised and the need for more energy as well as automation is growing. The origins of Siemens operations in South Africa date back to the humble beginnings of the mining era, when the company provided the first generator and floodlights to illuminate the famous 'Big Hole' of the diamond mine at Kimberley as well as hydro-electric plants in 1895 on the Crocodile River and Blyde River respectively to supply the newly established mines in the Lydenburg district with electric power. 7 figs.

Electronic, phononic, and thermoelectric properties of graphyne sheets

International Nuclear Information System (INIS)

Sevinçli, Hâldun; Sevik, Cem

2014-01-01

Electron, phonon, and thermoelectric transport properties of α-, β-, γ-, and 6,6,12-graphyne sheets are compared and contrasted with those of graphene. α-, β-, and 6,6,12-graphynes, with direction dependent Dirac dispersions, have higher electronic transmittance than graphene. γ-graphyne also attains better electrical conduction than graphene except at its band gap. Vibrationally, graphene conducts heat much more efficiently than graphynes, a behavior beyond an atomic density differences explanation. Seebeck coefficients of the considered Dirac materials are similar but thermoelectric power factors decrease with increasing effective speeds of light. γ-graphyne yields the highest thermoelectric efficiency with a thermoelectric figure of merit as high as ZT = 0.45, almost an order of magnitude higher than that of graphene

Uranium mining in the Canadian social environment of the eighties

International Nuclear Information System (INIS)

Dory, A.B.

1981-11-01

The attitude of the Canadian public to the mining industry as a whole has changed in recent years to one of mistrust because of the public perception of mining as environmentally harmful and humanly degrading. In addition, uranium mining has had to cope with the public fear of radiation. The uranium mining industry is closely regulated by the Atomic Energy Control Board, not only in the area of radiation protection but also in other fields affecting worker health and safety. Uranium mining has been the subject of many hearings in Canada, and all but one have concluded that it is environmentally and socially acceptable. It is up to the mining industry to convey this message to the public

African mining '91

International Nuclear Information System (INIS)

1991-01-01

The second 'African Mining' conference was held in June 1991, and followed the first event held in May 1987. That full four-year period was characterized by substantial changes in the political and economic climate of many countries in both hemispheres. The results of many of these changing facets of our industry are described in the papers in African Mining'91. Many of the papers deal with advances in technology, which is the main reason for the meeting. There are 37 papers under the headings general, mining, metallurgy and geology and exploration. Most papers are concerned with gold, copper and mineral mining. One paper concerning uranium mining operations in Namibia is indexed separately. (author)

Thermoelectric powered wireless sensors for spent fuel monitoring

International Nuclear Information System (INIS)

Carstens, T.; Corradini, M.; Blanchard, J.; Ma, Z.

2011-01-01

This paper describes using thermoelectric generators to power wireless sensors to monitor spent nuclear fuel during dry-cask storage. OrigenArp was used to determine the decay heat of the spent fuel at different times during the service life of the dry-cask. The Engineering Equation Solver computer program modeled the temperatures inside the spent fuel storage facility during its service life. The temperature distribution in a thermoelectric generator and heat sink was calculated using the computer program Finite Element Heat Transfer. From these temperature distributions the power produced by the thermoelectric generator was determined as a function of the service life of the dry-cask. In addition, an estimation of the path loss experienced by the wireless signal can be made based on materials and thickness of the structure. Once the path loss is known, the transmission power and thermoelectric generator power requirements can be determined. This analysis estimates that a thermoelectric generator can produce enough power for a sensor to function and transmit data from inside the dry-cask throughout its service life. (authors)

A design approach for integrating thermoelectric devices using topology optimization

DEFF Research Database (Denmark)

Soprani, Stefano; Haertel, Jan Hendrik Klaas; Lazarov, Boyan Stefanov

2016-01-01

Efficient operation of thermoelectric devices strongly relies on the thermal integration into the energy conversion system in which they operate. Effective thermal integration reduces the temperature differences between the thermoelectric module and its thermal reservoirs, allowing the system...... to operate more efficiently. This work proposes and experimentally demonstrates a topology optimization approach as a design tool for efficient integration of thermoelectric modules into systems with specific design constraints. The approach allows thermal layout optimization of thermoelectric systems...... for different operating conditions and objective functions, such as temperature span, efficiency, and power recoveryrate. As a specific application, the integration of a thermoelectric cooler into the electronics section ofa downhole oil well intervention tool is investigated, with the objective of minimizing...

Influence of Government economic policies on mining legislation

Energy Technology Data Exchange (ETDEWEB)

Jakob, K F

1980-01-01

As we know from experience, the relation between state and economy is characterized by more or less strong tensions. The following three groups have always claimed the right to dispose of mineral resources: the state - in former times the sovereign -, the landowners, and the mining industry. The first one has based his claim on his official power and has taken the view that he alone could protect the interests of the general public in winning mineral resources. The second ones have relied on their titles to real estates which basically cover unlimited depth. With the intent to work the mines, the mining industry refers to its know-how, performance and readiness, thus alleging that they would serve the national economy best. The historical development of mining laws has finally been characterized by a shift in priorities within these naturally strained relations which exist between state, landowners, and mining industry. It is examined how the emphasis has been shifted in this relationship in the course of time, with special consideration of the relationship between state and mining industry. Which rules of law the legislator intends to make with regard to mining laws will always depend on the question as to which economic policy the state intends to pursue.

High-Temperature High-Efficiency Solar Thermoelectric Generators

Energy Technology Data Exchange (ETDEWEB)

Baranowski, LL; Warren, EL; Toberer, ES

2014-03-01

Inspired by recent high-efficiency thermoelectric modules, we consider thermoelectrics for terrestrial applications in concentrated solar thermoelectric generators (STEGs). The STEG is modeled as two subsystems: a TEG, and a solar absorber that efficiently captures the concentrated sunlight and limits radiative losses from the system. The TEG subsystem is modeled using thermoelectric compatibility theory; this model does not constrain the material properties to be constant with temperature. Considering a three-stage TEG based on current record modules, this model suggests that 18% efficiency could be experimentally expected with a temperature gradient of 1000A degrees C to 100A degrees C. Achieving 15% overall STEG efficiency thus requires an absorber efficiency above 85%, and we consider two methods to achieve this: solar-selective absorbers and thermally insulating cavities. When the TEG and absorber subsystem models are combined, we expect that the STEG modeled here could achieve 15% efficiency with optical concentration between 250 and 300 suns.

Optimal operation of thermoelectric cooler driven by solar thermoelectric generator

International Nuclear Information System (INIS)

Khattab, N.M.; El Shenawy, E.T.

2006-01-01

The possibility of using a solar thermoelectric generator (TEG) to drive a small thermoelectric cooler (TEC) is studied in the present work. The study includes the theory of both the TEG and the TEC, giving special consideration to determination of the number of TEG modules required to power the TEC to achieve the best performance of the TEG-TEC system all year round. Commercially available thermoelectric modules (TE) are used in the system. The TEG contains 49 thermocouples and the TEC contains 127 thermocouples. A simple arrangement of plane reflectors that are designed to receive maximum solar energy during noon time is used to heat the TEG. Performance tests are conducted to determine both the physical properties and the performance curves of the available TE modules. Also, empirical relations describing the performance of the TEG and TEC modules have been established. These relations are used to develop a mathematical model simulating the TEG-TEC system to predict its performance all year round under the actual climatic conditions of Cairo, Egypt (30 deg. N latitude). The model results are used to determine the number of TEG modules required to drive a single TEC module at maximum cooling capacity. The results show that five thermocouples of the TEG can drive one thermocouple of the TEC, which coincides with the previous theory of the TEG-TEC. This means that 10 of the used TEG modules are required to power the used TEC at optimum performance most times of the year

Instrumentation for the uranium mining industry

International Nuclear Information System (INIS)

Gray, R.A.

1978-01-01

Brief descriptions are presented concerning instruments used in uranium mining, including R meter, radon daughter working level counter, radon gas detectors, alpha contamination monitors, air samplers, ore grade evaluators and gamma energy analyzers

In-situ thermoelectric temperature monitoring and "Closed-loop integrated control" system for concentrator photovoltaic-thermoelectric hybrid receivers

Science.gov (United States)

Rolley, Matthew H.; Sweet, Tracy K. N.; Min, Gao

2017-09-01

This work demonstrates a new technique that capitalizes on the inherent flexibility of the thermoelectric module to provide a multifunctional platform, and exhibits a unique advantage only available within CPV-TE hybrid architectures. This system is the first to use the thermoelectric itself for hot-side temperature feedback to a PID control system, needing no additional thermocouple or thermistor to be attached to the cell - eliminating shading, and complex mechanical designs for mounting. Temperature measurement accuracy and thermoelectric active cooling functionality is preserved. Dynamic "per-cell" condition monitoring and protection is feasible using this technique, with direct cell-specific temperature measurement accurate to 1°C demonstrated over the entire experimental range. The extrapolation accuracy potential of the technique was also evaluated.

Thermoelectric transport in rare-earth compounds

International Nuclear Information System (INIS)

Koehler, Ulrike

2007-01-01

This work focuses on the thermoelectric transport in rare-earth compounds. The measurements of the thermal conductivity, thermopower, and Nernst coefficient are supplemented by investigations of other quantities as magnetic susceptibility and specific heat. Chapter 2 provides an introduction to the relevant physical concepts. Section 1 of that chapter summarizes the characteristic properties of rare-earth systems; section 2 gives an overview on thermoelectric transport processes in magnetic fields. The applied experimental techniques as well as the new experimental setup are described in detail in Chapter 3. The experimental results are presented in Chapter 4-6, of which each concentrates on a different subject. In Chapter 4, various Eu clathrates and the skutterudite-like Ce 3 Rh 4 Sn 13 are presented, which have been investigated as potential thermoelectric materials for applications. Chapter 5 focusses on the study of the energy scales in the heavy-fermion series Lu 1-x Yb x Rh 2 Si 2 and Ce x La 1-x Ni 2 Ge 2 by means of thermopower investigations. Chapter 6 is dedicated to the thermoelectric transport properties of the correlated semimetal CeNiSn with special emphasis on the Nernst coefficient of this compound. (orig.)

Optimization in underground mine planning - developments and opportunities

OpenAIRE

Musingwini, C.

2016-01-01

The application of mining-specific and generic optimization techniques in the mining industry is deeply rooted in the discipline of operations research (OR). OR has its origins in the British Royal Air Force and Army around the early 1930s. Its development continued during and after World War II. The application of OR techniques to optimization in the mining industry started to emerge in the early 1960s. Since then, optimization techniques have been applied to solve widely different mine plan...

Giving back the land - a look at open-cast mining. [South Africa

Energy Technology Data Exchange (ETDEWEB)

Thompson, G.C.

1983-01-01

The mining industry, particularly the gold mining industry, has, since 1886, dominated the economic life of South Africa. Revenues from mining have provided the impetus which led to the development of this country from subsistence agriculture to one of industrial power. Coal is South Africa's second largest foreign exchange earner after gold, but opencast mining necessitates the alienation of agricultural land, albeit temporarily. The coal industry is improving the speed, and standards, of land reclamation.

Decoupling interrelated parameters for designing high performance thermoelectric materials.

Science.gov (United States)

Xiao, Chong; Li, Zhou; Li, Kun; Huang, Pengcheng; Xie, Yi

2014-04-15

The world's supply of fossil fuels is quickly being exhausted, and the impact of their overuse is contributing to both climate change and global political unrest. In order to help solve these escalating problems, scientists must find a way to either replace combustion engines or reduce their use. Thermoelectric materials have attracted widespread research interest because of their potential applications as clean and renewable energy sources. They are reliable, lightweight, robust, and environmentally friendly and can reversibly convert between heat and electricity. However, after decades of development, the energy conversion efficiency of thermoelectric devices has been hovering around 10%. This is far below the theoretical predictions, mainly due to the interdependence and coupling between electrical and thermal parameters, which are strongly interrelated through the electronic structure of the materials. Therefore, any strategy that balances or decouples these parameters, in addition to optimizing the materials' intrinsic electronic structure, should be critical to the development of thermoelectric technology. In this Account, we discuss our recently developed strategies to decouple thermoelectric parameters for the synergistic optimization of electrical and thermal transport. We first highlight the phase transition, which is accompanied by an abrupt change of electrical transport, such as with a metal-insulator and semiconductor-superionic conductor transition. This should be a universal and effective strategy to optimize the thermoelectric performance, which takes advantage of modulated electronic structure and critical scattering across phase transitions to decouple the power factor and thermal conductivity. We propose that solid-solution homojunction nanoplates with disordered lattices are promising thermoelectric materials to meet the "phonon glass electron crystal" approach. The formation of a solid solution, coupled with homojunctions, allows for

WIRELESS MINE WIDE TELECOMMUNICATIONS TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

Zvi H. Meiksin

2002-04-01

Two industrial prototype units for through-the-earth wireless communication were constructed and tested. Preparation for a temporary installation in NIOSH's Lake Lynn mine for the through-the-earth and the in-mine system were completed. Progress was made in the programming of the in-mine system to provide data communication. Work has begun to implement a wireless interface between equipment controllers and our in-mine system.

Methane in German hard coal mining

International Nuclear Information System (INIS)

Martens, P.N.; Den Drijver, J.

1995-01-01

Worldwide, hard coal mining is being carried out at ever increasing depth, and has, therefore, to cope with correspondingly increasing methane emissions are caused by coal mining. Beside carbon dioxide, chloro-fluoro-carbons (CFCs) and nitrogen oxides, methane is one of the most significant 'greenhouse' gases. It is mainly through the release of such trace gases that the greenhouse effect is brought about. Reducing methane emissions is therefore an important problem to be solved by the coal mining industry. This paper begins by highlighting some of the fundamental principles of methane in hard coal mining. The methane problem in German hard coal mining and the industry's efforts to reduce methane emissions are presented. The future development in German hard coal mining is illustrated by an example which shows how large methane volumes can be managed, while still maintaining high outputs at increasing depth. (author). 7 tabs., 10 figs., 20 refs

Evaluation of the current practices of noise-induced hearing loss (NIHL) awareness training in the South African mining industry

CSIR Research Space (South Africa)

Edwards, AL

2015-01-01

Full Text Available This study aimed to evaluate the current practices in relation to best practice criteria and make recommendations for improvements to noise-induced hearing loss (NIHL) awareness training in the South African mining industry. A survey tool based...

CSIR Division of Mining Technology annual review 1993/94

Energy Technology Data Exchange (ETDEWEB)

1994-01-01

The Division of Mining Technology of the CSIR (Council for Scientific and Industrial Research) works in partnership with the mining industry to solve problems threatening the health, safety and well-being of the workforce, and the productivity of mining operations through the development and implementation of knowledge and technology. The annual review describes the Division's research projects in the following field: rock engineering (for gold, platinum and coal mining); mining environment; occupational hygiene; surface environment; and mining equipment and systems (systems and equipment, orebody information, coal mining and causes of accidents). Details are also given of the Division's publications, research and consultancy services and information centre.

Thermoelectric power and electrical conductivity of strontium-doped lanthanum manganite

DEFF Research Database (Denmark)

Ahlgren, E.O.; Poulsen, F.W.

1996-01-01

Thermoelectric power and electrical conductivity of pure and 5, 10 and 20% strontium-doped lanthanum manganite are determined as function of temperature in air and of P-O2 at 1000 degrees C. At high temperatures the thermoelectric power is negative. Both thermoelectric power and conductivity...

Research Progress on AgSbTe2-based Thermoelectric Materials

Institute of Scientific and Technical Information of China (English)

CAO Qigao; MA Guang; JIA Zhihua; ZHENG Jing; LI Jin

2012-01-01

Thermoelectric power generation represents a class of energy conversion technology,which has been used in power supply of aeronautic and astronautic exploring missions,now showing notable advantages to harvest the widely distributed waste heat and convert the abundant solar energy into electricity at lower cost than Si-based photovoltaic technology.Thermoelectric dimensionless figure of merit ZT plays a key role in the conversion efficiency from thermal to electrical energy.Low thermal conductivity and large Seebeck coefficient make the AgSbTe2 compound a very promising candidate for high efficiency p-type thermoelectric applications.The AgSbTe2-based thermoelectric system has been repeatedly studied as prospective thermoelectric materials.In this review,we firstly clarify some fundamental tradeoffs dictating the ZT value through the relationship ZT =S2σT/κ.We also pay special attentions to the recent advances in AgSbTe2-based thermoelectric materials.Finally,we provide an outlook of new directions in this filed.

MINE WASTE TECHNOLOGY PROGRAM: A SUCCESS STORY

Science.gov (United States)

Mining Waste generated by active and inactive mining operations is a growing problem for the mining industry, local governments, and Native American communities because of its impact on human health and the environment. In the US, the reported volume of mine waste is immense: 2 b...

Occupational health risk assessment : overview, model and guide for the South African mining industry towards a holistic solution / Casper Johannes Badenhorst

OpenAIRE

Badenhorst, Casper Johannes

2006-01-01

In the South African Mining Industry the Legislator has recognised the need to identify health hazards associated with any workplace or process and to assess ,the associated risks (Leon, 1994). Neither the Mine Health and Safety Act (29/1996) and its Regulations, nor the Occupational Health and Safety Act (85/1993) and its Regulations, prescribe a specific format for the systematic and holistic approach to conduct occupational health risk assessments, but do prescribe some crit...

Occupational respiratory diseases in the South African mining industry

OpenAIRE

Nelson, Gill

2013-01-01

Background: Crystalline silica and asbestos are common minerals that occur throughout South Africa, exposure to either causes respiratory disease. Most studies on silicosis in South Africa have been crosssectional and long-term trends have not been reported. Although much research has been conducted on the health effects of silica dust and asbestos fibre in the gold-mining and asbestos-mining sectors, little is known about their health effects in other mining sectors. Objective: The aims of t...

Thermoelectric generation coupling methanol steam reforming characteristic in microreactor

International Nuclear Information System (INIS)

Wang, Feng; Cao, Yiding; Wang, Guoqiang

2015-01-01

Thermoelectric (TE) generator converts heat to electric energy by thermoelectric material. However, heat removal on the cold side of the generator represents a serious challenge. To address this problem and for improved energy conversion, a thermoelectric generation process coupled with methanol steam reforming (SR) for hydrogen production is designed and analyzed in this paper. Experimental study on the cold spot character in a micro-reactor with monolayer catalyst bed is first carried out to understand the endothermic nature of the reforming as the thermoelectric cold side. A novel methanol steam reforming micro-reactor heated by waste heat or methanol catalytic combustion for hydrogen production coupled with a thermoelectric generation module is then simulated. Results show that the cold spot effect exists in the catalyst bed under all conditions, and the associated temperature difference first increases and then decreases with the inlet temperature. In the micro-reactor, the temperature difference between the reforming and heating channel outlets decreases rapidly with an increase in thermoelectric material's conductivity coefficient. However, methanol conversion at the reforming outlet is mainly affected by the reactor inlet temperature; while at the combustion outlet, it is mainly affected by the reactor inlet velocity. Due to the strong endothermic effect of the methanol steam reforming, heat supply of both kinds cannot balance the heat needed at reactor local areas, resulting in the cold spot at the reactor inlet. When the temperature difference between the thermoelectric module's hot and cold sides is 22 K, the generator can achieve an output voltage of 55 mV. The corresponding molar fraction of hydrogen can reach about 62.6%, which corresponds to methanol conversion rate of 72.6%. - Highlights: • Cold spot character of methanol steam reforming was studied through experiment. • Thermoelectric generation Coupling MSR process has been

1834 till 2009 - review of 175 years of wire rope development and application in the mining industry; 1834 bis 2009 - Rueckblick auf 175 Jahre Drahtseilentwicklung und Anwendung im Bergbau

Energy Technology Data Exchange (ETDEWEB)

Dill, Rainer [Verein fuer Technische Sicherheit und Umweltschutz e.V. (TSU), Gotha (Germany); DMT GmbH und Co. KG, Leipzig (Germany)

2010-03-15

Inspector of Mines Albert is the main focus of attention in this contribution. Hence in particular the creative and technically brilliant work since his entry into the Harz mining industry are described in addition to his career. Thanks to his untiring efforts a usable wire rope was introduced into mining industry for the first time in 1834. However, the inventive genius and technical skill of Muehlenpfordt and Mummenthey, employees of the Koenigshuette in Lauterberg, also deserve praise, because they were the first to supply suitable wires for the manufacture of a rope. (orig.)

Fine Art of Thermoelectricity.

Science.gov (United States)

Brus, Viktor V; Gluba, Marc; Rappich, Jörg; Lang, Felix; Maryanchuk, Pavlo D; Nickel, Norbert H

2018-02-07

A detailed study of hitherto unknown electrical and thermoelectric properties of graphite pencil traces on paper was carried out by measuring the Hall and Seebeck effects. We show that the combination of pencil-drawn graphite and brush-painted poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) films on regular office paper results in extremely simple, low-cost, and environmentally friendly thermoelectric power generators with promising output characteristics at low-temperature gradients. The working characteristics can be improved even further by incorporating n-type InSe flakes. The combination of pencil-drawn n-InSe:graphite nanocomposites and brush-painted PEDOT:PSS increases the power output by 1 order of magnitude.

Widespread waterborne pollution in central Swedish lakes and the Baltic Sea from pre-industrial mining and metallurgy.

Science.gov (United States)

Bindler, Richard; Renberg, Ingemar; Rydberg, Johan; Andrén, Thomas

2009-07-01

Metal pollution is viewed as a modern problem that began in the 19th century and accelerated through the 20th century; however, in many parts of the globe this view is wrong. Here, we studied past waterborne metal pollution in lake sediments from the Bergslagen region in central Sweden, one of many historically important mining regions in Europe. With a focus on lead (including isotopes), we trace mining impacts from a local scale, through a 120-km-long river system draining into Mälaren--Sweden's third largest lake, and finally also the Baltic Sea. Comparison of sediment and peat records shows that pollution from Swedish mining was largely waterborne and that atmospheric deposition was dominated by long-range transport from other regions. Swedish ore lead is detectable from the 10th century, but the greatest impact occurred during the 16th-18th centuries with improvements occurring over recent centuries, i.e., historical pollution > modern industrial pollution.

A Flue Gas Tube for Thermoelectric Generator

DEFF Research Database (Denmark)

2013-01-01

The invention relates to a flue gas tube (FGT) (1) for generation of thermoelectric power having thermoelectric elements (8) that are integrated in the tube. The FTG may be used in combined heat and power (CHP) system (13) to produce directly electricity from waste heat from, e.g. a biomass boiler...

Efficient technique for computational design of thermoelectric materials

Science.gov (United States)

Núñez-Valdez, Maribel; Allahyari, Zahed; Fan, Tao; Oganov, Artem R.

2018-01-01

Efficient thermoelectric materials are highly desirable, and the quest for finding them has intensified as they could be promising alternatives to fossil energy sources. Here we present a general first-principles approach to predict, in multicomponent systems, efficient thermoelectric compounds. The method combines a robust evolutionary algorithm, a Pareto multiobjective optimization, density functional theory and a Boltzmann semi-classical calculation of thermoelectric efficiency. To test the performance and reliability of our overall framework, we use the well-known system Bi2Te3-Sb2Te3.

The Atomic Energy Control Board and the uranium mining industry

International Nuclear Information System (INIS)

Duncan, R.M.

The Atomic Energy Control Board controls prescribed substances and nuclear facilities through a licensing system. It is only recently that this system has been applied to the uranium industry. There are four stages in the licensing procedure before a Mine-Mill Facility Operating Licence is issued: exploration requires an underground exploration permit; site approval is needed before the start of the development stage; development approval is required before the construction of the mill and waste management facilities and depends on the information in a preliminary safety report; the granting of a final operating licence occurs after the Board is satisfied with the final safety report, operating policies and principles, tailings management, and decommissioning plans. The Board has resource management policies designed to ensure that uranium reserves are available to meet Canada's needs. The administration of safeguards is also the Board's responsibility. (LL)

Natural radioactivity in mining and hydrocarbon extraction industry. Vol. 1

Energy Technology Data Exchange (ETDEWEB)

Testa, C; Desideri, D; Meli, M A; Roselli, C [General Chemistry Institute, Urbino University, 61029 Urbino, (Italy)

1996-03-01

Water and soil natural radioactivity is a well known phenomenon which can produced by variable concentrations of uranium and thorium series radionuclides. Generally, the relevant radiological hazard is not important; however, some radiation protection problems can occur in particular industrial processes involving the treatment of large quantities of materials. In this case a high concentration of radioactive substance (NORM: nationally occurring radioactive materials) can be found at special points of the plant, in the manufacture by-products and in the waters. Sometimes the national radioactivity concentration can be so high to raise radiation protection problems which can be assimilated in a sense to the ones faced in the presence, handling, and disposal of non-sealed radioactive sources. In this paper the following mining and hydrocarbon extraction plants were particularly taken into account: (a) industries using zircon sands to produce refractory and ceramic materials; (b) phosphorites manufacture to prepare phosphoric acids, plasters and fertilizers (c) hydrocarbon extraction and treatment processes where formations of low specific activity (L.S.A.) scales and sludges are produced. The relevant results and the possible radiation protection risks for the professional exposed staff will be reported. A special emphasis will be given to some african phosphorites (boucraa, togo, morocco), and L.S.A. scales (tunisia, congo, Egypt). 4 figs., 5 tabs.

Natural radioactivity in mining and hydrocarbon extraction industry. Vol. 1

International Nuclear Information System (INIS)

Testa, C.; Desideri, D.; Meli, M.A.; Roselli, C.

1996-01-01

Water and soil natural radioactivity is a well known phenomenon which can produced by variable concentrations of uranium and thorium series radionuclides. Generally, the relevant radiological hazard is not important; however, some radiation protection problems can occur in particular industrial processes involving the treatment of large quantities of materials. In this case a high concentration of radioactive substance (NORM: nationally occurring radioactive materials) can be found at special points of the plant, in the manufacture by-products and in the waters. Sometimes the national radioactivity concentration can be so high to raise radiation protection problems which can be assimilated in a sense to the ones faced in the presence, handling, and disposal of non-sealed radioactive sources. In this paper the following mining and hydrocarbon extraction plants were particularly taken into account: a) industries using zircon sands to produce refractory and ceramic materials; b) phosphorites manufacture to prepare phosphoric acids, plasters and fertilizers c) hydrocarbon extraction and treatment processes where formations of low specific activity (L.S.A.) scales and sludges are produced. The relevant results and the possible radiation protection risks for the professional exposed staff will be reported. A special emphasis will be given to some african phosphorites (boucraa, togo, morocco), and L.S.A. scales (tunisia, congo, Egypt). 4 figs., 5 tabs

Nano-Micro Materials Enabled Thermoelectricity From Window Glasses