WorldWideScience

Sample records for industrial manufacturing technology

  1. Photovoltaic industry manufacturing technology. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Vanecek, D.; Diver, M.; Fernandez, R. [Automation and Robotics Research Inst., Fort Worth, TX (United States)

    1998-08-01

    This report contains the results of the Photovoltaic (PV) Industry Manufacturing Technology Assessment performed by the Automation and Robotics Research Institute (ARRI) of the University of Texas at Arlington for the National Renewable Energy laboratory. ARRI surveyed eleven companies to determine their state-of-manufacturing in the areas of engineering design, operations management, manufacturing technology, equipment maintenance, quality management, and plant conditions. Interviews with company personnel and plant tours at each of the facilities were conducted and the information compiled. The report is divided into two main segments. The first part of the report presents how the industry as a whole conforms to ``World Class`` manufacturing practices. Conclusions are drawn from the results of a survey as to the areas that the PV industry can improve on to become more competitive in the industry and World Class. Appendix A contains the questions asked in the survey, a brief description of the benefits to performing this task and the aggregate response to the questions. Each company participating in the assessment process received the results of their own facility to compare against the industry as a whole. The second part of the report outlines opportunities that exist on the shop floor for improving Process Equipment and Automation Strategies. Appendix B contains the survey that was used to assess each of the manufacturing processes.

  2. Selection of Technology in Global Manufacturing Industries

    DEFF Research Database (Denmark)

    Bruun, Peter

    1997-01-01

    not work well. The host country's business and cultural environment must be taken into account in designing a production system which requires attention to the management elements of technology transfer. This paper presents a model for transfer of manufacturing technology to a foreign site based......Transferring a manufacturing system to another country has proven to be problematic for most multinational firms. Selection of the appropriate production process and technology is a critical decision as transplantation of an existing system from another country without adaptation usually does...... on a sociotechnical system approach. It views the decisions for selecting and implementing a production system as a five stage process. The first step is determining the strategic goals of the foreign plant followed by selection of the production process and manufacturing system types. The last stages involve...

  3. Changing Manufacturing Technology and Jobs in Defense Industries.

    Science.gov (United States)

    Oliver, Richard P.

    1983-01-01

    Provides information on the current status of computer-assisted manufacturing, current employment, and plans for new technology in three defense-related industries: aircraft, shipbuilding, and ordnance. (SK)

  4. National Survey of Computer Aided Manufacturing in Industrial Technology Programs.

    Science.gov (United States)

    Heidari, Farzin

    The current status of computer-aided manufacturing in the 4-year industrial technology programs in the United States was studied. All industrial technology department chairs were mailed a questionnaire divided into program information, equipment information, and general comments sections. The questionnaire was designed to determine the subjects…

  5. Centers for manufacturing technology: Industrial Advisory Committee Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

  6. TECHNOLOGICAL CHANGES IN THE CEMENT MANUFACTURING INDUSTRY.

    Science.gov (United States)

    WESSON, CARL E.

    THE PURPOSE OF THIS STUDY IS TO PRESENT A PRELIMINARY PICTURE OF OCCUPATIONAL CHANGES BROUGHT ABOUT IN THE MANUFACTURE OF CEMENT AS A RESULT OF INTRODUCING AUTOMATED EQUIPMENT. ONE AUTOMATED AND SEVERAL CONVENTIONAL TYPE CEMENT PLANTS WERE STUDIED. ANALYSIS OF DATA OBTAINED THROUGH RESEARCH AND DATA COLLECTED DURING THE STUDY REVEALED THAT…

  7. Manufacturing Technology and Industrial Modernization Incentive Programs

    Science.gov (United States)

    1991-07-01

    production 15. Pulsed Power Solid-state and gas discharge svkwits $ 160 Inductive storage devices Capadiors Batteries Homopolar generators Compensated...project. Inspection systems for rocket Tucson is the prime contractor for this motors will support a number of DoD Air Force funded Industrial Moderniza

  8. Accelerating Industrial Adoption of Metal Additive Manufacturing Technology

    Science.gov (United States)

    Vartanian, Kenneth; McDonald, Tom

    2016-03-01

    While metal additive manufacturing (AM) technology has clear benefits, there are still factors preventing its adoption by industry. These factors include the high cost of metal AM systems, the difficulty for machinists to learn and operate metal AM machines, the long approval process for part qualification/certification, and the need for better process controls; however, the high AM system cost is the main barrier deterring adoption. In this paper, we will discuss an America Makes-funded program to reduce AM system cost by combining metal AM technology with conventional computerized numerical controlled (CNC) machine tools. Information will be provided on how an Optomec-led team retrofitted a legacy CNC vertical mill with laser engineered net shaping (LENS®—LENS is a registered trademark of Sandia National Labs) AM technology, dramatically lowering deployment cost. The upgraded system, dubbed LENS Hybrid Vertical Mill, enables metal additive and subtractive operations to be performed on the same machine tool and even on the same part. Information on the LENS Hybrid system architecture, learnings from initial system deployment and continuing development work will also be provided to help guide further development activities within the materials community.

  9. Manufacturing technology in the Danish pig slaughter industry.

    Science.gov (United States)

    Hinrichsen, Lars

    2010-02-01

    The Danish pig meat industry is very export oriented. Ninety per cent of the production of the big cooperative slaughterhouses is exported to more than 100 countries all over the world. This poses a requirement for the industry to be globally competitive in the sense of quality, product safety and--of course--price. A big challenge for the industry is therefore to maintain sufficient low unit costs in spite of the high factor costs of Denmark. In particular the high labour costs must be accompanied by correspondingly high labour productivity. And, it should be emphasized, this high labour productivity must be achieved without compromising the concern for good working conditions of the employees in the manufacturing. Technology is one of the means to achieve this combination of good working conditions and high labour productivity. One of the most important benefits from automation is the improved working environment. Pig slaughtering, cutting and boning is traditionally very labour intensive and requires hard and repetitive work. For many people a job in a slaughterhouse is therefore not their first choice. This situation can be changed by automation, which will not only reduce arduous and repetitive work but in addition will introduce more motivating jobs in terms of planning, supervision and control of the new technology. Automation will also improve the hygiene and thereby the food safety. This applies in particular to the clean slaughter line where cross contamination between carcasses is reduced because of less manual handling and because the tools in the machines can be sterilised more effectively between each carcass. Automated processes are more accurate and repeatable than manual work. For some processes, in particular in cutting and boning, this will enhance the product yield. New technology can also improve the animal welfare. The group-stunning system and mechanised lairage systems are examples of that. Improved animal welfare has an ethical value in

  10. Advanced manufacturing technologies for improved competitiveness of the South African manufacturing industry

    CSIR Research Space (South Africa)

    Tlale, NS

    2008-11-01

    Full Text Available In this paper the manufacturing environment with regards to technology and market is discussed. Both the South African and global view are given, together with technology management strategies. Value added products are described and determined...

  11. Advantage Management Strategy in Competition via Technological Race Perspective: Empirical Evidence from the Taiwanese Manufacturing Industry

    OpenAIRE

    Tsu-Yi Hung; Yu-Ju Hsiao; Shih-Wei Wu

    2014-01-01

    This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs) tend to adopt the “catch-up” strategy to keep up with their competitors in order to remain in the technological race. The resu...

  12. The strategic value of industrial radiation manufacturing and processing technologies

    International Nuclear Information System (INIS)

    Chappas, W.J.; Silverman, J.

    1993-01-01

    Planned and projected budget cuts over the next many years will reduce the number of Department of Defense (DoD) personnel and the diversity and quantity of their armaments and systems. Consequently, there is a requirement for the deployment of more effective defense equipment and their more efficient operation. Concomitant with this challenge is an opportunity for innovative technologies that can, at a lower cost, produce new, stronger, more durable materials-and do so with less environmental impact. Radiation processing offers this potential for (a) creating significant cost savings and performance advantages in a broad range of defense materials; (b) destroying and detoxifying dangerous chemicals, ordnance, and rocket propellants; (c) cleaning noxious gaseous effluents; and (d) purifying contaminated water. Radiation technology has the potential to immediately affect defense materials and, in the short and long terms, US industrial international competitiveness

  13. Tribology in Manufacturing Technology

    CERN Document Server

    2013-01-01

    The present book aims to provide research advances on tribology in manufacturing technology for modern industry. This book can be used as a research book for final undergraduate engineering course (for example, mechanical, manufacturing, materials, etc) or as a subject on manufacturing at the postgraduate level. Also, this book can serve as a useful reference for academics, manufacturing and tribology researchers, mechanical, mechanical, manufacturing and materials engineers, professionals in related industries with manufacturing and tribology.

  14. Advantage Management Strategy in Competition via Technological Race Perspective: Empirical Evidence from the Taiwanese Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Tsu-Yi Hung

    2014-01-01

    Full Text Available This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs tend to adopt the “catch-up” strategy to keep up with their competitors in order to remain in the technological race. The result indicates that, under financial constraints, Taiwanese manufacturing firms attempt to invest in R&D to catch up with their rivals or to avoid being eliminated from the race.

  15. Advantage management strategy in competition via technological race perspective: empirical evidence from the Taiwanese manufacturing industry.

    Science.gov (United States)

    Hung, Tsu-Yi; Hsiao, Yu-Ju; Wu, Shih-Wei

    2014-01-01

    This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs) tend to adopt the "catch-up" strategy to keep up with their competitors in order to remain in the technological race. The result indicates that, under financial constraints, Taiwanese manufacturing firms attempt to invest in R&D to catch up with their rivals or to avoid being eliminated from the race.

  16. Advantage Management Strategy in Competition via Technological Race Perspective: Empirical Evidence from the Taiwanese Manufacturing Industry

    Science.gov (United States)

    Hung, Tsu-Yi; Hsiao, Yu-Ju; Wu, Shih-Wei

    2014-01-01

    This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs) tend to adopt the “catch-up” strategy to keep up with their competitors in order to remain in the technological race. The result indicates that, under financial constraints, Taiwanese manufacturing firms attempt to invest in R&D to catch up with their rivals or to avoid being eliminated from the race. PMID:25295307

  17. The Influence Of Globalisation And Modern Technological Changes On Manufacturing Industries In Libya

    Directory of Open Access Journals (Sweden)

    Nuri M. Triki

    2017-05-01

    Full Text Available Globalisation and new technologies are having an intense impact on the manufacturing industries. This is affecting business global and might demand new strategies and policies for manufacturing companies. Libya like several other countries in the Middle East and also is among the few developing African economies has been facing problems related to its productivity in industrial sector. Manufacturing industries in Libya was reared to offer better products and services as part of the government plans to reconstruct their economy and improve its industrial companies. So as to face these problems manufacturing sectors need to increase their production and they also require a clear strategy and policies towards an efficient supply chain about modern technology. A new technology is one of the improvement initiatives that can be used to enhance industrial performance competitiveness and decrease its costs by eliminating of waste and increasing added value activities. The significance of new technology and modern systems in the industrial world has enhanced in this decade because of the benefits that they bring to the factories and companies. The aims of this research is to investigate new technology strategies that will enable the Libyan manufacturing industries to shift towards an increase production and reduce its costs as well as to quantify the modern technological changes and the role of globalisation in addition to declaration of its effect on the growth additionally development of the Libyan industrial sector and competitiveness lastly moreover this survey make a recommendations to establish systems that improve the emergent needs of the national industrial sector.

  18. Manufacturing technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  19. Manufacturing Technology Research Needs of the Gear Industry

    Science.gov (United States)

    1987-12-31

    needs technical and financial help along with time to regain a little of its former position as a world class industry. The development of the National...8217 Association (BGMA) and the Instituite of Mechanical Engineers (IMechE) have recently jointly established the British Gear Assocation (BGA). Within the BGA is...Issues - Definition - Definition o Quality of Product or Function - Objectives - Bow are we Operating Now? o Response or Lead Time - Financial Impact

  20. STRUCTURAL ALTERNATIVES OF RUSSIAN MANUFACTURING INDUSTRIES AND ARCHITECTURE OF TECHNOLOGICAL MODERNIZATION. PART 1

    Directory of Open Access Journals (Sweden)

    Izryadnova O. I.

    2014-06-01

    Full Text Available Continuing stagnation in the Russian economy makes a compelling case for structural reforms and transition to new technologies in non-financial sector. Given the backdrop of investor choice to wait out the situation and pause their investments, stagnation threatens to remain for longer. The biggest concerns are related to the slowdown in the range of high-tech non-resource manufacturing industries. These industries should become the cornerstone to foster the development of scientific, technical, and innovative potential of the country, overcoming the technical deficit, and implementation of modern technologies of the sixth technological generation. The article assesses the place and role of manufacturing industries in Russia’s economy and presents an analysis of dynamic shifts in their structure during the business cycle. The article demonstrates the results of empirical study of monitoring of innovative receptiveness of manufacturing industries. We discuss the directions of expanded cooperation between business and state. We also outline opportunities for correcting policies and tools directed at activating innovative functioning of the manufacturing sector in the view of the growth of geopolitical tensions, forms and methods of effective institutional management of the modernization of business units. It appears that the issues of investment maneuver to single out some types of economic activities, which manufacture products and services with high added value and increasing competitiveness of the Russian economy, call for the change in the model of economic development.

  1. STRUCTURAL ALTERNATIVES OF RUSSIAN MANUFACTURING INDUSTRIES AND ARCHITECTURE OF TECHNOLOGICAL MODERNIZATION. PART 2

    Directory of Open Access Journals (Sweden)

    Izryadnova O. I.

    2014-09-01

    Full Text Available Continuing stagnation in the Russian economy makes a compelling case for structural reforms and transition to new technologies in non-financial sector. Given the backdrop of investor choice to wait out the situation and pause their investments, stagnation threatens to remain for longer. The biggest concerns are related to the slowdown in the range of high-tech non-resource manufacturing industries. These industries should become the cornerstone to foster the development of scientific, technical, and innovative potential of the country, overcoming the technical deficit, and implementation of modern technologies of the sixth technological generation. The article assesses the place and role of manufacturing industries in Russia’s economy and presents an analysis of dynamic shifts in their structure during the business cycle. The article demonstrates the results of empirical study of monitoring of innovative receptiveness of manufacturing industries. We discuss the directions of expanded cooperation between business and state. We also outline opportunities for correcting policies and tools directed at activating innovative functioning of the manufacturing sector in the view of the growth of geopolitical tensions, forms and methods of effective institutional management of the modernization of business units. It appears that the issues of investment maneuver to single out some types of economic activities, which manufacture products and services with high added value and increasing competitiveness of the Russian economy, call for the change in the model of economic development.

  2. Fundamental Theories and Key Technologies for Smart and Optimal Manufacturing in the Process Industry

    Directory of Open Access Journals (Sweden)

    Feng Qian

    2017-04-01

    Full Text Available Given the significant requirements for transforming and promoting the process industry, we present the major limitations of current petrochemical enterprises, including limitations in decision-making, production operation, efficiency and security, information integration, and so forth. To promote a vision of the process industry with efficient, green, and smart production, modern information technology should be utilized throughout the entire optimization process for production, management, and marketing. To focus on smart equipment in manufacturing processes, as well as on the adaptive intelligent optimization of the manufacturing process, operating mode, and supply chain management, we put forward several key scientific problems in engineering in a demand-driven and application-oriented manner, namely: ① intelligent sensing and integration of all process information, including production and management information; ② collaborative decision-making in the supply chain, industry chain, and value chain, driven by knowledge; ③ cooperative control and optimization of plant-wide production processes via human-cyber-physical interaction; and ④ life-cycle assessments for safety and environmental footprint monitoring, in addition to tracing analysis and risk control. In order to solve these limitations and core scientific problems, we further present fundamental theories and key technologies for smart and optimal manufacturing in the process industry. Although this paper discusses the process industry in China, the conclusions in this paper can be extended to the process industry around the world.

  3. Manufacturing capability as a technological development indicator in the pharmaceutical industry

    Directory of Open Access Journals (Sweden)

    John Jairo Gallo Castro

    2010-01-01

    Full Text Available The pharmaceutical industrial has five subsectors: medicines, cosmetics, phytotherapeutics, cleaning products and medical devices. The medicine subsector consists of organisations producing, importing and selling these products. Most studies about this industry have been guided by economic interests without assessing technological aspects of production. This article was aimed at proposing a methodology for assessing and describing the medicine sector according to its technological development by using the manufacturing capability concept. The main information was taken from the Colombian Medicaments and Food Surveillance Institute’s (Instituto Nacional de Vigilancia de Medicamentos y Alimentos - INVIMA databases related to pharmaceutical plant production in Bogotá, including material transformation facilities. This study led to three characteristics being identified for defining the pharmaceutical industry’s manufacturing capability: that related to the pharmacological group to which active pharmaceutical ingredients belong, that linked to specifications regarding medicines’ sterility and that related to the technology required for manufacturing each pharmaceutical product. An analysis of these features has thus been presented and some technologies have been identified which have not been transferred or assimilated by the organisations being studied. It was found that manufacturing capability should be considered as being an indicator of the degree of technological development in these subsectors in Colombia.

  4. Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Azimi, S.A.; Conrad, J.L.; Reed, J.E.

    1985-03-01

    Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

  5. Exploring the Technological Collaboration Characteristics of the Global Integrated Circuit Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Yun Liu

    2018-01-01

    Full Text Available With the intensification of international competition, there are many international technological collaborations in the integrated circuit manufacturing (ICM industry. The importance of improving the level of international technological collaboration is becoming more and more prominent. Therefore, it is vital for a country, a region, or an institution to understand the international technological collaboration characteristics of the ICM industry and, thus, to know how to enhance its own international technological collaboration. This paper depicts the international technological collaboration characteristics of the ICM industry based on patent analysis. Four aspects, which include collaboration patterns, collaboration networks, collaboration institutions, and collaboration impacts, are analyzed by utilizing patent association analysis and social network analysis. The findings include the following: first, in regard to international technological collaboration, the USA has the highest level, while Germany has great potential for future development; second, Asia and Europe have already formed clusters, respectively, in the cooperative network; last, but not least, research institutions, colleges, and universities should also actively participate in international collaboration. In general, this study provides an objective reference for policy making, competitiveness, and sustainability in the ICM industry. The framework presented in this paper could be applied to examine other industrial international technological collaborations.

  6. From technology transfer to local manufacturing: China's emergence in the global wind power industry

    Science.gov (United States)

    Lewis, Joanna Ingram

    This dissertation examines the development of China's large wind turbine industry, including the players, the status of the technology, and the strategies used to develop turbines for the Chinese market. The primary goals of this research project are to identify the models of international technology transfer that have been used among firms in China's wind power industry; examine to what extent these technology transfers have contributed to China's ability to locally manufacture large wind turbine technology; and evaluate China's ability to become a major player in the global wind industry. China is a particularly important place to study the opportunities for and dynamics of clean energy development due to its role in global energy consumption. China is the largest coal consuming and producing nation in the world, and consequently the second largest national emitter of carbon dioxide after only the United States. Energy consumption and carbon emissions are growing rapidly, and China is expected to surpass the US and become the largest energy consuming nation and carbon dioxide emitter in coming decades. The central finding of this dissertation is that even though each firm involved in the large wind turbine manufacturing industry in China has followed a very different pathway of technology procurement for the Chinese market, all of the firms are increasing the utilization of locally-manufactured components, and many are doing so without transferring turbine technology or the associated intellectual property. Only one fully Chinese-owned firm, Goldwind, has succeeded in developing a commercially available large wind turbine for the Chinese market. No Chinese firms or foreign firms are manufacturing turbines in China for export overseas, though many have stated plans to do so. There already exists a possible niche market for the smaller turbines that are currently being made in China, particularly in less developed countries that are looking for less expensive

  7. Educational program for industrial engineers : nurturing new perspectives on manufacturing technology

    OpenAIRE

    Ishii, Kazuyoshi; Ikeda, Hiroshi; Tsuchiya, Akinori; Shikida, Asami; Abe, Takehiko

    2005-01-01

    In this paper, we propose the basic concept and result of an educational program developed for industrial engineers and managers in leadership roles who wish to create new values in manufacturing technology. The basic concept combines an intelligent knowledge-based approach with the kaizen activity program in a framework of new value creation and comparative advantage models based on the ABC-G network (Academia, Business, Consultants, and Governmental officers). The educational program is bas...

  8. Industrial & Manufacturing Engineering | Classification | College of

    Science.gov (United States)

    Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

  9. Determining Technological Innovation and Competitiveness: A Cross Organizational Analysis of the Malaysian Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Amlus Ibrahim

    2012-01-01

    Full Text Available This study analyzed the determinants of technological innovation in the Malaysian manufacturing industry. Its main purpose is to identify a set of management- related variables characterizing Malaysian innovative firms. Moreover, the study aimed to test whether the set of determinant differs for firms with different technological trajectories. A sample of 204 Malaysian firms was used for the investigation, with one respondent from each firm. The questionnaire measured the technological innovation, as well as 5 main potential determinants of innovation adopted from literature. Statistical analysis used, including bivariate correlation and multivariate regression, in identifying association between the technological innovation and the determining variables. The results of the analysis lead the researcher to the model of 5 important determining factors of technological innovation. The important factors were intensity of R&D, trvhnoogical trajectories,intensity of marketing, engineers, scientist and managers with experience locally and technical competency of personnel,. The analysis of technological trajectories confirmed the hypotheses that set of important determinants of innovation as well as the extent of technological innovation differs for firms in different innovation processes.Keywords: Technologies trajectories, technological innovation, intensity of R&D.

  10. Texas Manufacturing Technology Center feasibility study for the Inland Regional Industrial Technology Institute

    International Nuclear Information System (INIS)

    1994-01-01

    This document presents the Texas Manufacturing Technology Center (TMTC) Business Plan to convert the Central Facility of the Superconducting Super Collider project to alternate uses. The plan is divided into six sections: (1) Executive Summary, (2) Market and Benefit Analysis, (3) Marketing Strategy, (4) Services, (5) Organization and Operations Overview, and (6) Financial Plan. Each area is supported by separate documents that address individual opportunities and challenges associated with transitioning the facility, and its asset base to new uses for benefit of the locality, state, region and nation

  11. The Competitive status of the U.S. civil aviation manufacturing industry: a study of the influences of technology in determining international industrial competitive advantage

    National Research Council Canada - National Science Library

    Seitz, Frederick; Steele, Lowell W

    1985-01-01

    ... A Study of the Influences of Technology in Determining International Industrial Competitive Advantage Prepared by the U.S. Civil Aviation Manufacturing Industry Panel, Committee on Technology and International Economic and Trade Issues of the Office of the Foreign Secretary, National Academy of Engineering and the Commission on Engineering and Techni...

  12. Evaluation of Project Based Learning in the Area of Manufacturing and Statistics in the Degree of Industrial Technology

    Science.gov (United States)

    Buj-Corral, Irene; Marco-Almagro, Lluís; Riba, Alex; Vivancos-Calvet, Joan; Tort-Martorell, Xavier

    2015-01-01

    In the subject Project I in the second year of the Degree in Industrial Technology Engineering taught at the School of Industrial Engineering of Barcelona (ETSEIB), subgroups of 3-4 students within groups of 20 students develop a project along a semester. Results of 2 projects are presented related to manufacturing, measurement of parts and the…

  13. Advanced Manufacturing Technologies

    Science.gov (United States)

    Fikes, John

    2016-01-01

    Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

  14. Behind the development of technology: The transition of innovation modes in China’s wind turbine manufacturing industry

    International Nuclear Information System (INIS)

    Ru Peng; Zhi Qiang; Zhang Fang; Zhong Xiaotian; Li Jianqiang; Su Jun

    2012-01-01

    The market scale of China’s wind turbine manufacturing industry has grown immensely. Despite China still having a limited capacity in terms of technology innovation, the institutional support has promoted the technology capability development of the wind turbine manufacturing industry. This paper explores the driving forces underlying this development by reviewing the transition of the innovation modes and the dynamic interactions among the technology capability, innovation modes, market formation, and wind energy policy. The innovation mode in China began with imitative innovation, then transitioned to cooperative innovation, and has more recently set its sights on attaining truly indigenous innovation. Public policy serves as a key driving force for the evolution of innovation modes, as well as the development of the market. The policy focus has evolved in the following sequence: 1. building the foundation for technological innovation; 2. encouraging technology transfer; 3. enhancing local R and D and manufacturing capabilities; 4. enlarging the domestic market; and 5. cultivating an open environment for global competition and sustainable market development in China. - Highlights: ► New data were provided for China’s wind turbine manufacturing industry. ► The transition of innovation modes in the industry is reviewed. ► The interaction among the technology, market, policy, and innovation mode is explored. ► Public policies are the key driving forces for the transition.

  15. Evaluation of Technological Trends and Demands of the Manufacturing Industry to a Center of R&D&I

    Directory of Open Access Journals (Sweden)

    Leone Peter Correia da Silva Andrade

    2015-10-01

    Full Text Available The manufacturing industry is fairly representative in the Brazilian economy. The research activities in technology, development and innovation promoted by technology centers are of great importance to boost the competitiveness of this segment. In this context, this work aims presenting the development of the strategic planning for a Center of R&D&I (Research & Development & Innovation, looking 20 years ahead, on a macro level, creating a master plan which summarizes the future focus areas of competence for technology research, development and innovation, coping with manufacturing trends, using a participative workshop approach. Thus, it is expected that this center offer integrated technological solutions with high added value that promote the development and competitiveness of the manufacturing industry, in the prospects for medium and long term. In order to achieve the project objectives taking the principle of strategic planning was followed. On the one hand, focus was placed on the internal perspective analyzing the current status of the Center. On the other hand, the environment of the Center (external perspective was analyzed. Matching the analysis results regarding both perspectives future competence areas were derived, according to global technological trends as well as national and local industrial demand. Thus, the competencies required to be developed by a technology center to meet the manufacturing industry over the next twenty years would be derived.

  16. Training for New Manufacturing Technologies.

    Science.gov (United States)

    Jacobs, James

    1988-01-01

    Examines the effects of computer-based manufacturing technologies on employment opportunities and job skills. Describes the establishment of the Industrial Technology Institute in Michigan to develop and utilize advanced manufacturing technologies, and the institute's relationship to the state's community colleges. Reviews lessons learned from…

  17. ORC technology for waste-wood to energy conversion in the furniture manufacturing industry

    Directory of Open Access Journals (Sweden)

    Moro Riccardo

    2008-01-01

    Full Text Available Exploitation of low and medium temperature thermal sources, in particular those based on biomass combustion and on industrial residual heat recovery, has been increasingly investigated in the last decades, accordingly to the growing interest towards reduction in primary energy consumption and environmental issues. Organic Rankine cycle technology allows designing power plants that are less demanding in terms of auxiliaries, safety systems, maintenance and operating costs when compared to conventional water steam power plants. To support the preliminary technical and economic design of this kind of plants in different contexts, a simulation code of part load and off-design operation of an organic Rankine cycle unit for combined heat and power has been developed. In the paper, taking the real situation of a furniture manufacturing factory as a starting point, it is shown how all energy flows occurring all year long inside the combined heat and power plant, can be estimated on the basis of the thermal user duty time profile, the available biomass flow rate and the adopted operation strategy. This information is the basis in order to correctly evaluate the energetic, economic and environmental advantages of the proposed technical solution, with respect to a particular context, as it is shown in the concluding part of the paper.

  18. Ultra-High Efficiency and Low-Emissions Combustion Technology for Manufacturing Industries

    Energy Technology Data Exchange (ETDEWEB)

    Atreya, Arvind

    2013-04-15

    The purpose of this research was to develop and test a transformational combustion technology for high temperature furnaces to reduce the energy intensity and carbon footprint of U.S. manufacturing industries such as steel, aluminum, glass, metal casting, and petroleum refining. A new technology based on internal and/or external Flue Gas Recirculation (FGR) along with significant enhancement in flame radiation was developed. It produces "Radiative Flameless Combustion (RFC)" and offers tremendous energy efficiency and pollutant reduction benefits over and above the now popular "flameless combustion." It will reduce the energy intensity (or fuel consumption per unit system output) by more than 50% and double the furnace productivity while significantly reducing pollutants and greenhouse gas emissions (10^3 times reduction in NOx and 10 times reduction in CO & hydrocarbons and 3 times reduction in CO2). Product quality improvements are also expected due to uniform radiation, as well as, reduction in scale/dross formation is expected because of non-oxidative atmosphere. RFC is inexpensive, easy to implement, and it was successfully tested in a laboratory-scale furnace at the University of Michigan during the course of this work. A first-ever theory with gas and particulate radiation was also developed. Numerical programs were also written to design an industrial-scale furnace. Nine papers were published (or are in the process of publication). We believe that this early stage research adequately proves the concept through laboratory experiments, modeling and computational models. All this work is presented in the published papers. Important conclusions of this work are: (1) It was proved through experimental measurements that RFC is not only feasible but a very beneficial technology. (2) Theoretical analysis of RFC was done in (a) spatially uniform strain field and (b) a planar momentum jet where the strain rate is neither prescribed nor uniform. Four important non

  19. Radiation technology in finishing process improves health, safety and environment (HSE) in the furniture manufacturing industry

    International Nuclear Information System (INIS)

    Ahmad Shakri Mat Seman

    1999-01-01

    In furniture manufacturing, processes like cross cutting, molding, planning, shaping, turning, assembling and finishing are involved. The most significant types of negative impact of these processes are such as dust emission, noise, hazardous work, health risk, emission of organic solvent, toxic chemicals emission and chemical waste. In the finishing process, a number of negative effects that will cause health, safety and environmental (HSE) performance. This article highlights the environmental problems in the furniture finishing processes and how the radiation technology can reduce these negative impacts. The drawbacks that hamper the manufacturers from adopting this technology are also discussed. The objective of the paper is to create the awareness among the industrialist and consumers on the HSE hazardous in furniture finishing and steps can be taken to improve

  20. DEVELOPMENT OF INFORMATION TECHNOLOGY STRATEGIC PLANNING FOR MANUFACTURING INDUSTRY (CASE STUDY: PT MCM

    Directory of Open Access Journals (Sweden)

    Leonardus Hardjo

    2013-10-01

    Full Text Available IT Department in PT MCM has to carry out the duties and functions of developing solution to support the business unit in their operation and gain some benefits which should be obtained by using IT in manufacturing such as increasing efficiency, improving the effectivity in making decision and helping to promote the products. This study aims to design information technology strategic planning in accordance with the strategic plan. The research method is using the IT Strategic Planning framework of Alex Cullen and Marc Cecere. This study uses SWOT and IT Balanced Scorecard to analyze the needs of IT at PT MCM. The results of this study are recommended strategic steps to optimize the implementation of IT in the company to improve the performance from IT division to obtain the benefits by implementing IT in manufacturing and to form IT Blueprint, which is part of the information technology strategic plan in PT MCM.

  1. 2001 Industry Studies: Advanced Manufacturing

    Science.gov (United States)

    2001-05-28

    oriented, 19 and manufacturers are employing the Internet and associated information technologies to better integrate supply chains and form extended...ways to compete in world markets . As part of this ongoing transformation, the broad implementation of advanced manufacturing technologies , processes...competitive advantages and better performance in world markets . Importantly, advanced manufacturing involves the innovative integration of new technology

  2. Japan's technology and manufacturing infrastructure

    Science.gov (United States)

    Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

    1995-02-01

    The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

  3. Manufacturing engineering and technology

    CERN Document Server

    Kalpakjian, Serope; Vijai Sekar, K S

    2014-01-01

    For courses in manufacturing processes at two- or four-year schools. An up-to-date text that provides a solid background in manufacturing processes. Manufacturing Engineering and Technology, SI Edition, 7e, presents a mostly qualitative description of the science, technology, and practice of manufacturing. This includes detailed descriptions of manufacturing processes and the manufacturing enterprise that will help introduce students to important concepts. With a total of 120 examples and case studies, up-to-date and comprehensive coverage of all topics, and superior two-color graphics, this text provides a solid background for manufacturing students and serves as a valuable reference text for professionals. Teaching and Learning Experience To provide a better teaching and learning experience, for both instructors and students, this program will: * Apply Theory and/or Research: An excellent overview of manufacturing conceptswith a balance of relevant fundamentals and real-world practices. * Engage Students: E...

  4. Environmental Regulation, Foreign Direct Investment and Green Technological Progress—Evidence from Chinese Manufacturing Industries

    Science.gov (United States)

    Hu, Jiangfeng; Wang, Zhao; Lian, Yuehan; Huang, Qinghua

    2018-01-01

    This study examines the spillover effects of foreign direct investment (FDI) on green technology progress rate (as measured by the green total factor productivity). The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications—high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI. PMID:29382112

  5. Environmental Regulation, Foreign Direct Investment and Green Technological Progress—Evidence from Chinese Manufacturing Industries

    Directory of Open Access Journals (Sweden)

    Jiangfeng Hu

    2018-01-01

    Full Text Available This study examines the spillover effects of foreign direct investment (FDI on green technology progress rate (as measured by the green total factor productivity. The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications—high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI.

  6. Environmental Regulation, Foreign Direct Investment and Green Technological Progress-Evidence from Chinese Manufacturing Industries.

    Science.gov (United States)

    Hu, Jiangfeng; Wang, Zhao; Lian, Yuehan; Huang, Qinghua

    2018-01-29

    This study examines the spillover effects of foreign direct investment (FDI) on green technology progress rate (as measured by the green total factor productivity). The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications-high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI.

  7. Cleaner Technology in the Hard Disk Drive Manufacturing Industry: A Case Study

    Science.gov (United States)

    Moolla, Premchai; Chompu-inwai, Rungchat

    2010-10-01

    The objectives of this research are to improve raw material and energy consumption efficiency, as well as reduce defects and the use of chemicals in the arm coil assembly process of hard disk drive manufacturing in the case study company by applying the Cleaner Technology concepts. The four main sequential steps used in this research were: (1) pre-assessment, (2) assessment, (3) feasibility study, and (4) implementation. In the first step, raw data, such as process flows, raw material usage and defects data were collected. In the second step, the loss during production and causes of loss were analyzed. Opportunities to reduce raw material, chemical and energy wastage could then be recommended. The next step was to evaluate the feasibility and potential benefits of a particular Cleaner Technology opportunity. Finally, in the last step, after a thorough evaluation and implementation of the opportunities to apply Cleaner Technology, the results showed that arm coil defects could be reduced by improving the production process using the ECRS technique. ECRS stands for Eliminate, Combine, Rearrange and Simplify. This improvement reduced arm coil defect rates from 0.48% to 0.15%, thus saving approximately 139,638 Thai Baht per month. In addition, production stoppage decision made by workers was used to increase employee involvement in defect detection. Allowing workers to participate in such a decision was an effective way to reduce defect rate and could motivate workers to produce a better quality job. This resulted in arm coil defects reducing from 0.41% to 0.025%, with about 74,562 Thai Baht per month saving. Additionally, an increase in the efficiency of electricity consumption occurred, by increasing the speed of the infrared oven conveyor belt, improving average productivity from 533 pieces/hour to 560 pieces/hour, without adversely affecting product costs and quality, thus producing products of up to the value of 206,242 Thai Baht per month. Furthermore, the new

  8. Handbook of manufacturing engineering and technology

    CERN Document Server

    2015-01-01

    The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.

  9. Energetics Manufacturing Technology Center (EMTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

  10. Advanced manufacturing: Technology diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Tesar, A.

    1995-12-01

    In this paper we examine how manufacturing technology diffuses rom the developers of technology across national borders to those who do not have the capability or resources to develop advanced technology on their own. None of the wide variety of technology diffusion mechanisms discussed in this paper are new, yet the opportunities to apply these mechanisms are growing. A dramatic increase in technology diffusion occurred over the last decade. The two major trends which probably drive this increase are a worldwide inclination towards ``freer`` markets and diminishing isolation. Technology is most rapidly diffusing from the US In fact, the US is supplying technology for the rest of the world. The value of the technology supplied by the US more than doubled from 1985 to 1992 (see the Introduction for details). History shows us that technology diffusion is inevitable. It is the rates at which technologies diffuse to other countries which can vary considerably. Manufacturers in these countries are increasingly able to absorb technology. Their manufacturing efficiency is expected to progress as technology becomes increasingly available and utilized.

  11. Composites Manufacturing Education and Technology Facility Expedites Manufacturing Innovation

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    The Composites Manufacturing Education and Technology facility (CoMET) at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) paves the way for innovative wind turbine components and accelerated manufacturing. Available for use by industry partners and university researchers, the 10,000-square-foot facility expands NREL's composite manufacturing research capabilities by enabling researchers to design, prototype, and test composite wind turbine blades and other components -- and then manufacture them onsite. Designed to work in conjunction with NREL's design, analysis, and structural testing capabilities, the CoMET facility expedites manufacturing innovation.

  12. Manufacturing strategy issues in selected Indian manufacturing industry

    Directory of Open Access Journals (Sweden)

    Mahender Singh

    2013-03-01

    Full Text Available This paper presents some findings of Indian manufacturing sectors viz. automobile (especially two-wheeler, tractor and general manufacturing industry. Various manufacturing strategy issues such as competitive priorities, improvement activities, and performance measures, have been identified and assessed in Indian context. Sector wise comparison of competitive priorities, improvement activities i.e. advanced manufacturing technology (AMT, integrated information systems (IIS, and advanced management systems (AMS, and performance measure, is provided. Our results showed that most of the Indian companies are still emphasizing on quality. However, automobile sector has set to compete globally with high innovation rate, faster new product development, and continuous improvement. It is also observed that Indian companies are investing more in AMS as compared to IIS and AMT. Manufacturing competence index is also computed for each sector.

  13. Hazardous air pollutant emissions from process units in the synthetic organic chemical manufacturing industry: Background information for proposed standards. Volume 1B. Control technologies. Draft report

    International Nuclear Information System (INIS)

    1992-11-01

    A draft rule for the regulation of emissions of organic hazardous air pollutants (HAP's) from chemical processes of the synthetic organic chemical manufacturing industry (SOCMI) is being proposed under the authority of Sections 112, 114, 116, and 301 of the Clean Air Act, as amended in 1990. The volume of the Background Information Document presents discussions of control technologies used in the industry and the costs of those technologies

  14. The incoming global technological and industrial revolution towards competitive sustainable manufacturing

    DEFF Research Database (Denmark)

    Jovane, F.; Yoshikawa, H.; Alting, Leo

    2008-01-01

    , knowledge-based, competitive sustainable manufacturing (CSM) has been widely considered as main enabler. This paper presents the necessary steps from economic growth to sustainable development. The reference model for proactive action (RMfPA) is proposed to develop and implement CSM, at national and global...... levels. Furthermore, we also review strategies to pursue CSM at the macro-meso-field level in addition to ongoing national initiatives in different countries and by international organizations. A case study concerning the European Manufuture initiative is cited. The overall results conclude that RMf...

  15. Manufacturing Industry, Industry Study, Spring 2009

    Science.gov (United States)

    2009-01-01

    Shuib, Lieutenant Colonel, Royal Malaysian Air Force Kevin Brennan, Commander, U.S. Navy Mr. K. Ilia Christman, Department of the Navy Robert Costa...panel to review the impact of taxation , regulatory compliance, and benefits burdens on domestic manufacturers. Review would bring focus to ways...Finally, the MISG considered the effect of these 14 characteristics on the U.S. Manufacturing Industry vis-à-vis Chinese and Malaysian

  16. Metalcasting Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1998-01-01

    The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap outlines key goals for products and markets, materials technology, manufacturing technology, environmental technology, human resources, and industry health programs. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry.

  17. Turbine airfoil manufacturing technology

    Energy Technology Data Exchange (ETDEWEB)

    Kortovich, C. [PCC Airfoils, Inc., Beachwood, OH (United States)

    1995-12-31

    The specific goal of this program is to define manufacturing methods that will allow single crystal technology to be applied to complex-cored airfoils components for power generation applications. Tasks addressed include: alloy melt practice to reduce the sulfur content; improvement of casting process; core materials design; and grain orientation control.

  18. Development of a Computer Vision Technology for the Forest Products Manufacturing Industry

    Science.gov (United States)

    D. Earl Kline; Richard Conners; Philip A. Araman

    1992-01-01

    The goal of this research is to create an automated processing/grading system for hardwood lumber that will be of use to the forest products industry. The objective of creating a full scale machine vision prototype for inspecting hardwood lumber will become a reality in calendar year 1992. Space for the full scale prototype has been created at the Brooks Forest...

  19. Introduction to semiconductor manufacturing technology

    CERN Document Server

    2012-01-01

    IC chip manufacturing processes, such as photolithography, etch, CVD, PVD, CMP, ion implantation, RTP, inspection, and metrology, are complex methods that draw upon many disciplines. [i]Introduction to Semiconductor Manufacturing Technologies, Second Edition[/i] thoroughly describes the complicated processes with minimal mathematics, chemistry, and physics; it covers advanced concepts while keeping the contents accessible to readers without advanced degrees. Designed as a textbook for college students, this book provides a realistic picture of the semiconductor industry and an in-depth discuss

  20. Cloud manufacturing distributed computing technologies for global and sustainable manufacturing

    CERN Document Server

    Mehnen, Jörn

    2013-01-01

    Global networks, which are the primary pillars of the modern manufacturing industry and supply chains, can only cope with the new challenges, requirements and demands when supported by new computing and Internet-based technologies. Cloud Manufacturing: Distributed Computing Technologies for Global and Sustainable Manufacturing introduces a new paradigm for scalable service-oriented sustainable and globally distributed manufacturing systems.   The eleven chapters in this book provide an updated overview of the latest technological development and applications in relevant research areas.  Following an introduction to the essential features of Cloud Computing, chapters cover a range of methods and applications such as the factors that actually affect adoption of the Cloud Computing technology in manufacturing companies and new geometrical simplification method to stream 3-Dimensional design and manufacturing data via the Internet. This is further supported case studies and real life data for Waste Electrical ...

  1. Industrial technology transfer

    International Nuclear Information System (INIS)

    Bulger, W.

    1982-06-01

    The transfer of industrial technology is an essential part of the CANDU export marketing program. Potential customers require the opportunity to become self-sufficient in the supply of nuclear plant and equipment in the long term and they require local participation to the maximum extent possible. The Organization of CANDU Industries is working closely with Atomic Energy of Canada Ltd. in developing comprehensive programs for the transfer of manufacturing technology. The objectives of this program are: 1) to make available to the purchasing country all nuclear component manufacturing technology that exists in Canada; and 2) to assure that the transfer of technology takes place in an efficient and effective way. Technology transfer agreements may be in the form of joint ventures or license agreements, depending upon the requirements of the recipient

  2. A study on manufacturing technology of materials for fine chemical industry use (muscovite, sericite)

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Jung-Il; Shin, Hee-Young; Hwang, Seon-Kook; Ahn, Ji-Hwan; Bae, Kwang-Hyun [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1997-12-01

    For the technical development on utilization of unused mineral resources, the study was carried out on the highly purification and mineral processing of domestic Sericite and Muscovite. This study was also carried out to make the functional materials for the use of fine chemical industry. Scope and content of study: 1) A study on the high purification and mineral processing for sericite and muscovite. 2) A study on the surface treatment of fine particles of sericite and muscovite. EDAX analysis on surface treated Mica shows that absorbed area on mica surface appears about 56 wt% when reaction period of 75 min. The result on image analysis on the surface treated mica comparing with that of EDAX analysis appears that the material was stabilized when passing the 1st yielding point. The dry process of surface modification on mica was applied by using {Theta}-composer. The result shows that whiteness of the mica increases upto 91 at 20 min. grinding period. Polymer microcapsulation was carried out on the mica surface. The result shows that materials appear excellent hydrophobic property which is one of important factors for making cosmetics. Based on the applying test of mineral processing on Dong-jin mica, the result shows that high quality mica is recovered. Especially, lithium mica produced in the mine will be further studied in the next year project. (author). 26 refs., 36 tabs., 61 figs.

  3. A study on the manufacturing technology of material for fine chemical and electronic industry use.

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Sang-Keun; Kim, Byoung-Gon; Chung, Hun-Saeng [Korea Institute of Geology Mining and Materials, Taejon (KR)] (and others)

    1999-12-01

    The research results are summarized as follows; (1) An investigation on ultra-fine grinding characteristics of crystalline graphite on dry base system by vacuum technique was performed. Natural graphite grinding is inefficient, since graphite has lamella structures which cause the high lubrication by slipping of the layers. However, this lamella structure causes difficulty in grinding. Interposition states of grinding obstacle materials between graphite layers was proposed. (2) An investigation on the oxygen adsorption characteristics of ultrafine crystalline graphite powders(produced by grinding in vacuum) by surface treatment using an attrition mill on dry base was carried out. Adsorbed oxygen on graphite surface was known to influence the suspension stability of graphite particles. (3) The result of scale-up test shows that sericite concentrate obtained about 31.91% Al{sub 2}O{sub 3}, 9.76% K{sub 2}0 and 1.45% Fe{sub 2}O{sub 3}. The process of grinding and classification is obtained fine mica mean size of 2.39 {mu}m such as 3.5 wt.% yield. (4) The dry process of surface modification has been achieved up to 91 for whiteness as 20 min ground samples. Polymer microcapsulation was carried out on the mica surface. The results are excellent hydrophobic properties which is applied cosmetics industry. The results shows a possibility of producing nano size composite materials of 200-500nm and emitting test on purified sericite appears 0.914-0.915 intensity in wave length of 5-20 {mu}m. The delamination effect of surface coated sericite and Muscovite by using Theta-composer. (author). 105 refs., 56 tabs., 139 figs.

  4. Disruptive Innovation in Manufacturing Engineering towards the 4th Industrial Revolution: 8th International Conference on Digital Enterprise Technology

    OpenAIRE

    Constantinescu, Carmen; Bauer, Wilhelm; Sauer, Olaf; Maropoulos, Paul

    2014-01-01

    The CIRP sponsored DET 2014 conference focusses on the employment of modern ICT-technologies and tools for the modeling, simulation, optimization, advanced control and monitoring, real-time visualization of products, factories and manufacturing processes. The addressed areas cover all phases of product, factory and manufacturing processes life cycle starting with product design and development, engineering of factories, machines, equipment and technical processes, commissioning and rump-up, f...

  5. On-line sensor technology for food manufacturing industry. Shokuhin bun prime ya ni okeru on-line sensor gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Komiya, K. (Ajinomoto Co. Inc., Tokyo (Japan))

    1990-08-05

    This paper introduced the sensor technology for food manufacturing industry. If sugar concentration in main raw material is too high in the amino acid fermentation, control of the concentration is required because fungi growth is inhibited. A controlling method for sugar concentration was developed by using the correlation between consumption of NH {sub 3} for pH adjustment and sugar consumption in place of conventional analyzing method and was introduced in the gulutamic acid fermantation. BOD sensor was developed to enable the selective measurement of organic substances which can be processed by organisms, and measuring time was shortened from previous five days to 30 minutes. Since many organics absorb infrared ray, near infrared analysis is suitable for food analysis and on-line analysis has high possibility. When this method is applied to measure moisture in fishes and meats, continuous measurement can be made nondestructively and without contacting, and further the precision is {plus minus} 0.1%. Simultaneous multi-composition analyses are carried out by continuous spectrum and near infrared method using higher rate scanning. Sensor development for taste and smell has started. 10 refs., 4 figs., 4 refs.

  6. On Upbringing of Pupils' Self-Educational Ability in Industrial Arts Eeducation (2) : On Improvement of Manufacture Desire on Woodworking Technology Education with Teaching Materials on Computer-

    OpenAIRE

    大迫, 靖雄; 田口, 浩継; オオサコ, ヤスオ; タグチ, ヒロツグ; Ohsako, Yasuo; Taguchi, Hirotugu

    1995-01-01

    In this paper, we do woodworking technology education in the two teaching methods (both the normal teaching plan and the teaching plan with teaching materials on computer) at junior high school, and investigate on improvement of the manufacture desire connected with upbringing of pupils' self-educatinal ability of industrial arts education with teaching materials on computer. The results obtained are summarized as follows : (1) Woodworking technology education by the teaching plan with teachi...

  7. Challenges in teaching modern manufacturing technologies

    Science.gov (United States)

    Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

    2015-07-01

    Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in executing various projects. Lectures are developed to contain materials featuring advanced manufacturing technologies, R&D trends in manufacturing. Pre- and post-surveys were conducted by an external evaluator to assess the impact of the course on increase in student's knowledge of manufacturing; increase students' preparedness and confidence in effective communication and; increase students' interest in pursuing additional academic studies and/or a career path in manufacturing and high technology. The surveyed data indicate that the students perceived significant gains in manufacturing knowledge and preparedness in effective communication. The study also shows that implementation of a collaborative course within multiple institutions requires a robust and collective communication platform.

  8. Challenges in Teaching Modern Manufacturing Technologies

    Science.gov (United States)

    Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

    2015-01-01

    Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in…

  9. Advanced Manufacturing Office Clean Water Processing Technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    2018-03-01

    The DOE Office of Energy Efficiency and Renewable Energy (EERE)’s Advanced Manufacturing Office partners with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality domestic manufacturing jobs and enhance the global competitiveness of the United States.

  10. Revisiting the Competitiveness of Romanian Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Ovidiu RUJAN

    2007-01-01

    Full Text Available Since the early 1990s the Romanian manufacturing industry has improved in many ways. This headway concerns the labour-intensive sector rather than the technology-intensive one. Apart from local entrepreneurship, foreign direct investments (FDI have been instrumental in enhancing industrial competitiveness. TheLisbon Agenda revival and Romania’s EU accession will be further inducements for Western businesses to shift production here to fight back both low-cost producers (typically from emerging Asia and more quality-oriented producers (typically from OECD countries. Hopefully, the FDI spillover effects will send positive vibrationsacross the economy, and tone down the asymmetry at the core of the manufacturing industry.

  11. Rhenium Rocket Manufacturing Technology

    Science.gov (United States)

    1997-01-01

    The NASA Lewis Research Center's On-Board Propulsion Branch has a research and technology program to develop high-temperature (2200 C), iridium-coated rhenium rocket chamber materials for radiation-cooled rockets in satellite propulsion systems. Although successful material demonstrations have gained much industry interest, acceptance of the technology has been hindered by a lack of demonstrated joining technologies and a sparse materials property data base. To alleviate these concerns, we fabricated rhenium to C-103 alloy joints by three methods: explosive bonding, diffusion bonding, and brazing. The joints were tested by simulating their incorporation into a structure by welding and by simulating high-temperature operation. Test results show that the shear strength of the joints degrades with welding and elevated temperature operation but that it is adequate for the application. Rhenium is known to form brittle intermetallics with a number of elements, and this phenomena is suspected to cause the strength degradation. Further bonding tests with a tantalum diffusion barrier between the rhenium and C-103 is planned to prevent the formation of brittle intermetallics.

  12. Nano Manufacturing - Products and Technologies

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Alting, Leo

    2004-01-01

    The use of micro and nano technologies in components and products not only sets new demands to the manufacturing technologies. Product concepts have to be rethought and redefined in order to implement the micro and nano technologies into functional systems. Both a technology driven and a product ...

  13. Prefabricated Construction using Digitally Integrated Industrial Manufacturing

    Directory of Open Access Journals (Sweden)

    Harry Giles

    2012-10-01

    Full Text Available The paper describes research being carried out in relation to prefabricated high density affordablehousing under a grant from the Partnership for the Advancement of Technology in Housing(PATH and the National Science Foundation (NSF in the USA. The objective is to demonstratehow a new paradigm for the conceptualization and construction of buildings can be conceivedof as an entirely factory based process that creates advantages for construction through industrialsystems technology transfer. Our approach is intended to transform design methodologythrough demonstrating how alternative construction concepts, using entirely pre-manufacturedvolumetric units, can be adopted. This involves digital modeling that facilitates parametric variationsfor creating customized prefabricated products from design conceptualization through tofinal product delivery. The paper discusses key areas under investigation in relation to a manufacturingparadigm used in the automotive industry that integrates virtual prototyping and industrialmanufacturing systems. Our research explores a type of monocoque volumetric unit prefabricatedin steel, which will be pre-finished as part of a modular factory-built approach usingindustrialized methodologies that will facilitate customized manufacture of a high quality energyefficient product for affordable housing.The paper addresses the automotive industry methods of manufacture that have served increasedautomobile performance and economics through mass production for over a century. In starkcontrast, the building industry and in particular the housing industry is still a century behind. It issuggested that a move away from tradition will require an industry wide initiative, just like HenryFord led the way with mass production. By embracing the increasing sophistication and capabilitythat digital technology offers, it is shown how digital tools are implemented towards masscustomization in house design using virtual modeling in the

  14. Silicon Valley's Processing Needs versus San Jose State University's Manufacturing Systems Processing Component: Implications for Industrial Technology

    Science.gov (United States)

    Obi, Samuel C.

    2004-01-01

    Manufacturing professionals within universities tend to view manufacturing systems from a global perspective. This perspective tends to assume that manufacturing processes are employed equally in every manufacturing enterprise, irrespective of the geography and the needs of the people in those diverse regions. But in reality local and societal…

  15. Cyber physical systems role in manufacturing technologies

    Science.gov (United States)

    Al-Ali, A. R.; Gupta, Ragini; Nabulsi, Ahmad Al

    2018-04-01

    Empowered by the recent development in single System-on-Chip, Internet of Things, and cloud computing technologies, cyber physical systems are evolving as a major controller during and post the manufacturing products process. In additional to their real physical space, cyber products nowadays have a virtual space. A product virtual space is a digital twin that is attached to it to enable manufacturers and their clients to better manufacture, monitor, maintain and operate it throughout its life time cycles, i.e. from the product manufacturing date, through operation and to the end of its lifespan. Each product is equipped with a tiny microcontroller that has a unique identification number, access code and WiFi conductivity to access it anytime and anywhere during its life cycle. This paper presents the cyber physical systems architecture and its role in manufacturing. Also, it highlights the role of Internet of Things and cloud computing in industrial manufacturing and factory automation.

  16. Emerging technologies in arthroplasty: additive manufacturing.

    Science.gov (United States)

    Banerjee, Samik; Kulesha, Gene; Kester, Mark; Mont, Michael A

    2014-06-01

    Additive manufacturing is an industrial technology whereby three-dimensional visual computer models are fabricated into physical components by selectively curing, depositing, or consolidating various materials in consecutive layers. Although initially developed for production of simulated models, the technology has undergone vast improvements and is currently increasingly being used for the production of end-use components in various aerospace, automotive, and biomedical specialties. The ability of this technology to be used for the manufacture of solid-mesh-foam monolithic and coated components of complex geometries previously considered unmanufacturable has attracted the attention of implant manufacturers, bioengineers, and orthopedic surgeons. Currently, there is a paucity of reports describing this fabrication method in the orthopedic literature. Therefore, we aimed to briefly describe this technology, some of the applications in other orthopedic subspecialties, its present use in hip and knee arthroplasty, and concerns with the present form of the technology. As there are few reports of clinical trials presently available, the true benefits of this technology can only be realized when studies evaluating the clinical and radiographic outcomes of cementless implants manufactured with additive manufacturing report durable fixation, less stress shielding, and better implant survivorship. Nevertheless, the authors believe that this technology holds great promise and may potentially change the conventional methods of casting, machining, and tooling for implant manufacturing in the future. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  17. Cladding tube manufacturing technology

    International Nuclear Information System (INIS)

    Hahn, R.; Jeong, Y. H.; Baek, B. J.; Kim, K. H.; Kim, S. J.; Choi, B. K.; Kim, J. M.

    1999-04-01

    This report gives an overview of the manufacturing routine of PWR cladding tubes. The routine essentially consists of a series of deformation and annealing processes which are necessary to transform the ingot geometry to tube dimensions. By changing shape, microstructure and structure-related properties are altered simultaneously. First, a short overview of the basics of that part of deformation geometry is given which is related to tube reducing operations. Then those processes of the manufacturing routine which change the microstructure are depicted, and the influence of certain process parameters on microstructure and material properties are shown. The influence of the resulting microstructure on material properties is not discussed in detail, since it is described in my previous report A lloy Development for High Burnup Cladding . Because of their paramount importance still up to now, and because manufacturing data and their influence on properties for other alloys are not so well established or published, the descriptions are mostly related to Zry4 tube manufacturing, and are only in short for other alloys. (author). 9 refs., 46 figs

  18. Cladding tube manufacturing technology

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, R. [Kraftwerk Union AG, Mulheim (Germany); Jeong, Y.H.; Baek, B.J.; Kim, K.H.; Kim, S.J.; Choi, B.K.; Kim, J.M. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1999-04-01

    This report gives an overview of the manufacturing routine of PWR cladding tubes. The routine essentially consists of a series of deformation and annealing processes which are necessary to transform the ingot geometry to tube dimensions. By changing shape, microstructure and structure-related properties are altered simultaneously. First, a short overview of the basics of that part of deformation geometry is given which is related to tube reducing operations. Then those processes of the manufacturing routine which change the microstructure are depicted, and the influence of certain process parameters on microstructure and material properties are shown. The influence of the resulting microstructure on material properties is not discussed in detail, since it is described in my previous report 'Alloy Development for High Burnup Cladding.' Because of their paramount importance still up to now, and because manufacturing data and their influence on properties for other alloys are not so well established or published, the descriptions are mostly related to Zry4 tube manufacturing, and are only in short for other alloys. (author). 9 refs., 46 figs.

  19. Technology for Manufacturing Efficiency

    Science.gov (United States)

    1995-01-01

    The Ground Processing Scheduling System (GPSS) was developed by Ames Research Center, Kennedy Space Center and divisions of the Lockheed Company to maintain the scheduling for preparing a Space Shuttle Orbiter for a mission. Red Pepper Software Company, now part of PeopleSoft, Inc., commercialized the software as their ResponseAgent product line. The software enables users to monitor manufacturing variables, report issues and develop solutions to existing problems.

  20. [Chinese medicine industry 4.0:advancing digital pharmaceutical manufacture toward intelligent pharmaceutical manufacture].

    Science.gov (United States)

    Cheng, Yi-Yu; Qu, Hai-Bin; Zhang, Bo-Li

    2016-01-01

    A perspective analysis on the technological innovation in pharmaceutical engineering of Chinese medicine unveils a vision on "Future Factory" of Chinese medicine industry in mind. The strategy as well as the technical roadmap of "Chinese medicine industry 4.0" is proposed, with the projection of related core technology system. It is clarified that the technical development path of Chinese medicine industry from digital manufacture to intelligent manufacture. On the basis of precisely defining technical terms such as process control, on-line detection and process quality monitoring for Chinese medicine manufacture, the technical concepts and characteristics of intelligent pharmaceutical manufacture as well as digital pharmaceutical manufacture are elaborated. Promoting wide applications of digital manufacturing technology of Chinese medicine is strongly recommended. Through completely informationized manufacturing processes and multi-discipline cluster innovation, intelligent manufacturing technology of Chinese medicine should be developed, which would provide a new driving force for Chinese medicine industry in technology upgrade, product quality enhancement and efficiency improvement. Copyright© by the Chinese Pharmaceutical Association.

  1. NEDO Forum 2001. Session on industrial technology development (Future of thing making and manufacturing/processing technologies); NEDO Forum 2001. Sangyo gijutsu kaihatsu session (monozukuri seisan kako gijutsu no mirai)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-20

    The presentations made at the above-named session of the NEDO (New Energy and Industrial Technology Development Organization) forum held in Tokyo on September 20, 2001, are collected in this report. In a lecture entitled 'History of thing making,' the roles played by the now-defunct National Testing Laboratory and Industrial Test and Research Center were described and strategy for future development was predicted. In a lecture entitled 'Thing making and international apprentices competition,' apprenticeship training in practice at Denso Systems Corporation was presented. In a lecture entitled 'Key technology in thing making: outlook of metal mold industry,' shift in Japanese manufacturers' paradigm and change in metal mold marketing were explained, and the importance of reaching for the first position in the world in some specific fields or of expanding the scope of work in the entire value chain was stressed. In a lecture entitled 'Digital meister project: Aiming at amalgamation of IT (information technology) and MT (manufacturing technology),' database construction in the manufacture of metal molds, introduction of knowledge management systems, and development of CAD/CAM/CAE (computer-aided design/computer-aided manufacturing/computer-aided engineering) were discussed. (NEDO)

  2. Technological assessment of local manufacturers for wind turbine blade manufacturing in Pakistan

    Science.gov (United States)

    Mahmood, Khurram; Haroon, General

    2012-11-01

    Composite materials manufacturing industry is one of the world's hi-tech industry. Manufacturing of wind turbine blades is one of the specialized fields requiring high degree of precision and composite manufacturing techniques. This paper identifies the industries specializing in the composite manufacturing and is able to manufacture wind turbines blades in Pakistan. In the second phase, their technology readiness level is determined, based on some factors and then a readiness level are assigned to them. The assigned technology readiness level will depict the absorptive capacity of each manufacturing unit and its capability to take on such projects. The individual readiness level of manufacturing unit will then be used to establish combined technology readiness level of Pakistan particularly for wind turbine blades manufacturing. The composite manufacturing industry provides many spin offs and a diverse range of products can be manufactured using this facility. This research will be helpful to categorize the strong points and flaws of local industry for the gap analysis. It can also be used as a prerequisite study before the evaluation of technologies and specialties to improve the industry of the country for the most favorable results. This will form a basic data base which can be used for the decision making related to transfer of technology, training of local skilled workers and general up-gradation of the local manufacturing units.

  3. Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing

    Directory of Open Access Journals (Sweden)

    Adam Sanders

    2016-09-01

    Full Text Available Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industry 4.0 and lean manufacturing, and investigates whether Industry 4.0 is capable of implementing lean. Executing Industry 4.0 is a cost-intensive operation, and is met with reluctance from several manufacturers. This research also provides an important insight into manufacturers’ dilemma as to whether they can commit into Industry 4.0, considering the investment required and unperceived benefits. Design/methodology/approach: Lean manufacturing is first defined and different dimensions of lean are presented. Then Industry 4.0 is defined followed by representing its current status in Germany. The barriers for implementation of lean are analysed from the perspective of integration of resources. Literatures associated with Industry 4.0 are studied and suitable solution principles are identified to solve the abovementioned barriers of implementing lean. Findings: It is identified that researches and publications in the field of Industry 4.0 held answers to overcome the barriers of implementation of lean manufacturing. These potential solution principles prove the hypothesis that Industry 4.0 is indeed capable of implementing lean. It uncovers the fact that committing into Industry 4.0 makes a factory lean besides being smart. Originality/value: Individual researches have been done in various technologies allied with Industry 4.0, but the potential to execute lean manufacturing was not completely perceived. This paper bridges the gap between these two realms, and identifies

  4. Information technology use in the food and beverage industry: a planning model for small and medium manufacturing enterprises

    Directory of Open Access Journals (Sweden)

    Gibson Barcelos Reggiani

    2011-12-01

    Full Text Available The determinant variables of the performance of small and medium companies (SMEs are associated to aspects of entrepreneurial capacity, regional economy, positioning in the market and type of operational management. These aspects are all influenced by the use of information technology (IT. This paper presents the intervening factors in the management process of these companies and a model that contemplates IT as an integrant part of the enterprise planning. The model, based on the Competence Theory, identifies in the business context of the company the critical factors to its success, the capacities and resources necessary to its sustain and the metrical which should reflect the evolution of the results of the company in relation to its objectives. Associated to these capacities IT resources are identified to be applied to upgrade the existing competences, or to develop new ones, according to the strategic focus and positioning of the company in the market. It is presented also a case study of a manufacturing SME of beverages where the model is being applied. The case shows some metrical results which certify the effectiveness of the model, although the short time of implantation. In spite of still being in the validation phase, with implementations in companies of other sectors, the model has shown favorable aspects mainly due to its  cognitive and recurrent approach, which is well appropriate to the management process of  SMEs.

  5. 77 FR 24722 - Draft Guidance for Industry: Assessing the Effects of Significant Manufacturing Process Changes...

    Science.gov (United States)

    2012-04-25

    ...] Draft Guidance for Industry: Assessing the Effects of Significant Manufacturing Process Changes... Manufacturing Process Changes, Including Emerging Technologies, on the Safety and Regulatory Status of Food... determining whether changes in manufacturing process, including the intentional reduction in particle size to...

  6. Spring 2008 Industry Study. Manufacturing Industry

    Science.gov (United States)

    2008-01-01

    Chamber of Commerce puts the number of U.S. manufacturing jobs lost to piracy at 750,000 (U.S. Chamber of Commerce , 2007). Interviews with...economy each year and puts millions at risk from counterfeit medicines and engine parts (U.S. Chamber of Commerce , 2007). There are, however, several...Association of Manufacturers (NAM) and the U.S. Chamber of Commerce advocate global changes to IP protection, calling for the “reform and harmonization

  7. Compressed Air System Enhancement Increases Efficiency and Provides Energy Savings at a Circuit Board Manufacturer (Sanmina Plant, Oswego, New York): Office of Industrial Technologies (OIT) BestPractices Technical Case Study

    International Nuclear Information System (INIS)

    Wogsland, J.

    2001-01-01

    This case study is one in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. This case study documents the activities, savings, and lessons learned on the circuit board manufacturer (Sanmina Plant) project

  8. Industry 4.0 and representative participation in innovation in manufacturing industries

    OpenAIRE

    Ramioul, Monique

    2017-01-01

    Industry 4.0 and representative participation in innovation in manufacturing industries Prof. dr. Monique Ramioul HIVA-KU Leuven, Belgium Abstract submitted for the ETUI-workshop “Digitalization of manufacturing and restructuring of value chains: technology adoption, upgrading, and the changing geography of production in Europe.” (23-24 February 2017, Naples Italy). Under the umbrella concept Industry4.0, the advanced digitalisation and robotisation of industry is presented as a pro...

  9. Development of Advanced Ceramic Manufacturing Technology; FINAL

    International Nuclear Information System (INIS)

    Pujari, V.K.

    2001-01-01

    Advanced structural ceramics are enabling materials for new transportation engine systems that have the potential for significantly reducing energy consumption and pollution in automobiles and heavy vehicles. Ceramic component reliability and performance have been demonstrated in previous U.S. DOE initiatives, but high manufacturing cost was recognized as a major barrier to commercialization. Norton Advanced Ceramics (NAC), a division of Saint-Gobain Industrial Ceramics, Inc. (SGIC), was selected to perform a major Advanced Ceramics Manufacturing Technology (ACMT) Program. The overall objectives of NAC's program were to design, develop, and demonstrate advanced manufacturing technology for the production of ceramic exhaust valves for diesel engines. The specific objectives were (1) to reduce the manufacturing cost by an order of magnitude, (2) to develop and demonstrate process capability and reproducibility, and (3) to validate ceramic valve performance, durability, and reliability. I n order to achieve these objectives, NAC, a leading U.S. advanced ceramics component manufacturer, assembled a multidisciplinary, vertically integrated team. This team included: a major diesel engine builder, Detroit Diesel Corporation (DDC); a corporate ceramics research division, SGIC's Northboro R and D Center; intelligent processing system developers, BDM Federal/MATSYS; a furnace equipment company, Centorr/Vacuum Industries; a sintering expert, Wittmer Consultants; a production OEM, Deco-Grand; a wheel manufacturer and grinding operation developer, Norton Company's Higgins Grinding Technology Center (HGTC); a ceramic machine shop, Chand Kare Technical Ceramics; and a manufacturing cost consultant, IBIS Associates. The program was divided into four major tasks: Component Design and Specification, Component Manufacturing Technology Development, Inspection and Testing, and Process Demonstration

  10. Technological dispute for manufacturing population

    Directory of Open Access Journals (Sweden)

    B.M. Hevko

    2017-12-01

    Full Text Available New designs of technological equipment are presented – a variegated unit for adjusting the machine for precise manufacturing of a cut or on a tool of a tester, or on a workpiece, and also a design of a control device for measuring average diameters of taps. An important element in the manufacture of cutting tools is the manufacture of appropriate technological equipment. So for the manufacture of taps, it is necessary to develop the design of technological equipment for the adjustment of the necessary design parameters, as well as the design of control devices for their parameters. To provide these operations to instruments are the requirements of accuracy, productivity, stability, cost of production and a number of others. The new design of the technological equipment for the adjustment of the machine for precise manufacturing of the cutting is presented. The design of the control device for measuring the average diameter of the taps is also given. The advantages of the device include improving the quality of processing and working out the design on the technological.

  11. Industry 4.0 implies lean manufacturing: research activities in industry 4.0 function as enablers for lean manufacturing

    OpenAIRE

    Sanders, Adam; Elangeswaran, Chola; Wulfsberg, Jens

    2016-01-01

    Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industr...

  12. Contemporary design and manufacturing technology

    CERN Document Server

    Wang, Taiyong; Zuo, Dunwen

    2013-01-01

    The special topic volume communicates the latest progress and research results of new theory, new technology, method, equipment and so on in Engineering Technology, and to grasp the updated technological and research trends in internationally. The major topics covered by the special volumes include Advanced Materials and Manufacturing Technologies, Control, Automation and Detection Systems, Advanced Design Technology, Optimization and Modeling. In 80 invited and peer-reviewed papers, mechanical and other engineers describe their recent and current research and results in advanced materials and

  13. Advances in solid dosage form manufacturing technology.

    Science.gov (United States)

    Andrews, Gavin P

    2007-12-15

    Currently, the pharmaceutical and healthcare industries are moving through a period of unparalleled change. Major multinational pharmaceutical companies are restructuring, consolidating, merging and more importantly critically assessing their competitiveness to ensure constant growth in an ever-more demanding market where the cost of developing novel products is continuously increasing. The pharmaceutical manufacturing processes currently in existence for the production of solid oral dosage forms are associated with significant disadvantages and in many instances provide many processing problems. Therefore, it is well accepted that there is an increasing need for alternative processes to dramatically improve powder processing, and more importantly to ensure that acceptable, reproducible solid dosage forms can be manufactured. Consequently, pharmaceutical companies are beginning to invest in innovative processes capable of producing solid dosage forms that better meet the needs of the patient while providing efficient manufacturing operations. This article discusses two emerging solid dosage form manufacturing technologies, namely hot-melt extrusion and fluidized hot-melt granulation.

  14. Development of steam generator manufacturing technology

    International Nuclear Information System (INIS)

    Grant, J.A.

    1979-01-01

    In 1968 Babcock and Wilcox (Operations) Ltd., received an order from the CEGB to design, manufacture, install and commission 16 Steam Generators for 2 x 660 Mw (e) Advanced Gas Cooled Reactor Power Station at Hartlepool. This order was followed in 1970 by a similar order for the Heysham Power Station. The design and manufacture of the Steam Generators represented a major advance in technology and the paper discusses the methods by which a manufacturing facility was developed, by the Production Division of Babcock, to produce components to a quality, complexity and accuracy unique in the U.K. commercial boilermaking industry. The discussion includes a brief design background, a description of the Steam Generators and a view of the Production Division background. This is followed by a description of the organisation of the technological development and a consideration of the results. (author)

  15. Energy use in the food manufacturing industry

    Energy Technology Data Exchange (ETDEWEB)

    Cleland, A.C.; Earle, M.D.

    1980-01-01

    A survey was conducted to find the level of energy consumption in the food manufacturing industry, which is the food processing industry excluding meat, dairy, and brewing. Data were used from 74 factories. The manufacturing industry was divided into 14 industry groups and the 4 major energy consumers were found to be fruit and vegetable processing, sugar refining, animal feed production, and bread and pastry baking. The present report summarizes results from the survey. It determined the following: the sources of energy used by the insu industry and the annual consumption of each energy form; the consumption of fuel and electricity in the production of the various manufactured food products; the minimum practical energy requirement for processing the various food products; and the potential for conservation and the methods for achieving savings.

  16. ENABLING SMART MANUFACTURING TECHNOLOGIES FOR DECISION-MAKING SUPPORT

    Science.gov (United States)

    Helu, Moneer; Libes, Don; Lubell, Joshua; Lyons, Kevin; Morris, KC

    2017-01-01

    Smart manufacturing combines advanced manufacturing capabilities and digital technologies throughout the product lifecycle. These technologies can provide decision-making support to manufacturers through improved monitoring, analysis, modeling, and simulation that generate more and better intelligence about manufacturing systems. However, challenges and barriers have impeded the adoption of smart manufacturing technologies. To begin to address this need, this paper defines requirements for data-driven decision making in manufacturing based on a generalized description of decision making. Using these requirements, we then focus on identifying key barriers that prevent the development and use of data-driven decision making in industry as well as examples of technologies and standards that have the potential to overcome these barriers. The goal of this research is to promote a common understanding among the manufacturing community that can enable standardization efforts and innovation needed to continue adoption and use of smart manufacturing technologies. PMID:28649678

  17. Spring 2007. Industry Study. Manufacturing Industry

    Science.gov (United States)

    2007-01-01

    their success. Each company advertised the world-class capabilities of their product, not its price. By contrast, a struggling company we visited in...business disruptions lurking within the Trojan Horse we have nestled in the US industrial base. It is important to note that a catastrophic disaster from

  18. Industrial Sickness in Indian Manufacturing

    OpenAIRE

    Falk, Rahel

    2005-01-01

    In India, the term ‘sick units’ refers to economically unviable firms which are kept alive ‘in the public interest’ by means of subsidies of various kinds. Since this practice is common, and large parts of the industrial sector are affected, this phenomenon is referred to as industrial sickness. As of March 2001, the Reserve Bank of India counted over a quarter of a million of sick units with outstanding credit worth more than a quarter of a trillion of Indian Rupees, i.e. about 1.2 percent o...

  19. Advances in 3D printing & additive manufacturing technologies

    CERN Document Server

    Pandey, Pulak; Kumar, L

    2017-01-01

    This edited volume comprises select chapters on advanced technologies for 3D printing and additive manufacturing and how these technologies have changed the face of direct, digital technologies for rapid production of models, prototypes and patterns. Because of its wide applications, 3D printing and additive manufacturing technology has become a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across industries such as consumer products, aerospace, medical devices and automotives. The objective of this book is to help designers, R&D personnel, and practicing engineers understand the state-of-the-art developments in the field of 3D Printing and Additive Manufacturing. .

  20. High energy beam manufacturing technologies

    International Nuclear Information System (INIS)

    Geskin, E.S.; Leu, M.C.

    1989-01-01

    Technological progress continues to enable us to utilize ever widening ranges of physical and chemical conditions for material processing. The increasing cost of energy, raw materials and environmental control make implementation of advanced technologies inevitable. One of the principal avenues in the development of material processing is the increase of the intensity, accuracy, flexibility and stability of energy flow to the processing site. The use of different forms of energy beams is an effective way to meet these sometimes incompatible requirements. The first important technological applications of high energy beams were welding and flame cutting. Subsequently a number of different kinds of beams have been used to solve different problems of part geometry control and improvement of surface characteristics. Properties and applications of different specific beams were subjects of a number of fundamental studies. It is important now to develop a generic theory of beam based manufacturing. The creation of a theory dealing with general principles of beam generation and beam-material interaction will enhance manufacturing science as well as practice. For example, such a theory will provide a format approach for selection and integration of different kinds of beams for a particular application. And obviously, this theory will enable us to integrate the knowledge bases of different manufacturing technologies. The War of the Worlds by H. G. Wells, as well as a number of more technical, although less exciting, publications demonstrate both the feasibility and effectiveness of the generic approach to the description of beam oriented technology. Without any attempt to compete with Wells, we still hope that this volume will contribute to the creation of the theory of beam oriented manufacturing

  1. Information technology in fuel manufacturing

    International Nuclear Information System (INIS)

    Seshagiri Rao, G.R.; Arora, U.K.; Mohanty, Deepak; Siva Kumar, G.V.S.M.; Banerjee, P.K.

    2012-01-01

    NFC, Hyderabad is engaged in manufacturing of fuel assemblies required for Indian Nuclear Power Programme. During the manufacturing process, the basic Uranium Fuel and Zirconium alloy cladding tubes travels through several work centers, machines and exposes to various process parameters. For analyzing the fuel performance these parameters are indicators and is a requirement to record such history by both manufacturer and customer. NFC has planned to deploy Information Technology (IT) Systems from MDU/UOC Dissolution to Finished Fuel Assembly dispatch stage by using Radio Frequency IDentification (RFID)/Barcode Technologies. IT Systems are connected to electronic weigh balances to acquire material weight data automatically. The IT Systems are also designed to receive data from small Island Systems like Helium leak testing equipments. As a pilot project the system is initially implemented from empty tube Tray preparation stage to Fuel Assembly Packing and dispatch stage, containing about more than 14 processes. The system was built using open source technology platform and was deployed on a cost effective Hardware environment. The present paper describes the development process of the system, Implementation challenges faced and change management. The paper also discusses about fruits of implementation and productivity improvements. (author)

  2. Manufacturing Innovation and Technological Superiority

    Science.gov (United States)

    2016-09-01

    The technologies of interest are deter- mined by an expert interagency body with industry input. Focus areas include lightweight alloys, digitization...35—Northrop Grumman and BAE—are all making investments that will reduce government cost and achieve a higher return for the industry participants...all the equipment that we acquired to test once the wall came down and the Russians were desper- ate for any source of cash . The other was at the

  3. Ubiquitous Robotic Technology for Smart Manufacturing System.

    Science.gov (United States)

    Wang, Wenshan; Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

    2016-01-01

    As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods.

  4. Integrating developing country manufacturing industries into global supply chain

    Directory of Open Access Journals (Sweden)

    Fasika Bete Georgise

    2014-01-01

    Full Text Available Purpose: Due to globalization of manufacturing activities, the arena of competition and competitiveness advantage is moving from firms towards supply chains and networks. With the recent advancement of information and communication technologies this participation are becoming as common business practice in developed countries firms. Companies were more integrated into the world market for the global nature of the sourcing, manufacturing and distribution. These changes create both challenges and opportunities for the manufacturing industries in developing countries. The objective of this paper is to examine the level of inter-organizational and intra-organizational supply chain integration practices in developing country, Ethiopia.Design/methodology/approach: An industrial questionnaires survey was used to collect the current practices of the manufacturing industries in Ethiopia as an example of the developing countries. Descriptive statistics is primarily used for the analysis.Findings: Results show a low level of supply chain relationship both in intra and inter organizational supply chain integration level among members. Accordingly, such issues require much attention to facilitate a greater integration within the supply chains in the Ethiopian manufacturing industries.Research limitations/implications: The paper focuses on examining the practices of Ethiopian manufacturing industries empirical data. The interpretation of results should be taken with prudence.Originality/Value: The manufacturing industry in developing countries (MIDC has been a part of the global supply chains for long time as a supplier of raw material and manufacturer of primary products. Currently, the MIDC is trying to access the different markets segment of the world even with new products starting from their local market to the complex and dynamic international market. Nevertheless, their supply chains are inefficient and hence, their competitiveness level far from the

  5. Shaping the manufacturing industry performance: MIDAS approach

    International Nuclear Information System (INIS)

    Turhan, Ibrahim M.; Sensoy, Ahmet; Hacihasanoglu, Erk

    2015-01-01

    We aim to find out whether the exchange rate (against US dollar) or the interest rate (in local currency) is a better variable in predicting the capacity utilization rate of manufacturing industry (CUR) of Turkey after the 2008 global financial crisis. In that manner, we implement dynamic mixed data sampling (MIDAS) regression model to forecast monthly changes in CUR by using daily changes in the exchange rate and the interest rate separately. The results show that exchange rate has a better forecast performance suggesting that it is a stronger determinant in shaping the manufacturing industry

  6. RPC industries - UV and EB equipment manufacturers

    International Nuclear Information System (INIS)

    Rodrigues, A.M.

    1987-01-01

    RPC Industries has been manufacturing electron beam and ultraviolet equipment for the industrial processing of materials for more than 15 years. RPC maintains its headquarters and electron processor manufacturing plant in Hayward, California. UV equipment is made in the company's plant near Chicago. Sales offices are maintained in New York, Illinois, and California in the USA, and in Germany, Japan, Australia, Italy, Israel, and Sweden. Complete testing and pilot facilities are available in Hayward (EB) and near Chicago (UV). Described below are the basic system components, applications and advantages of RPC's UV and EB systems. (orig.)

  7. CSIR R&D in emerging manufacturing technologies

    CSIR Research Space (South Africa)

    Trollip, Neil

    2017-10-01

    Full Text Available This presentation discusses Advanced Robotics and Emerging manufacturing technologies by Dr Neil Trollip, at the 6th CSIR Conference: Ideas that work for industrial development, 5-6 October 2017, CSIR International Convention Centre, Pretoria...

  8. Manufacturing Technology Information Analysis Center: Knowledge Is Strength

    Science.gov (United States)

    Safar, Michal

    1992-01-01

    The Center's primary function is to facilitate technology transfer within DoD, other government agencies and industry. The DoD has recognized the importance of technology transfer, not only to support specific weapon system manufacture, but to strengthen the industrial base that sustains DoD. MTIAC uses an experienced technical staff of engineers and information specialists to acquire, analyze, and disseminate technical information. Besides ManTech project data, MTIAC collects manufacturing technology from other government agencies, commercial publications, proceedings, and various international sources. MTIAC has various means of disseminating this information. Much of the technical data is on user accessible data bases. The Center researches and writes a number of technical reports each year and publishes a newsletter monthly. Customized research is performed in response to specific inquiries from government and industry. MTIAC serves as a link between Government and Industry to strengthen the manufacturing technology base through the dissemination of advanced manufacturing information.

  9. Manufacturing technology and process for BWR fuel

    International Nuclear Information System (INIS)

    Kato, Shigeru

    1996-01-01

    Following recent advanced technologies, processes and requests of the design changes of BWR fuel, Nuclear Fuel Industries, Ltd. (NFI) has upgraded the manufacturing technology and honed its own skills to complete its brand-new automated facility in Tokai in the latter half of 1980's. The plant uses various forms of automation throughout the manufacturing process: the acceptance of uranium dioxide powder, pelletizing, fuel rod assembling, fuel bundle assembling and shipment. All processes are well computerized and linked together to establish the integrated control system with three levels of Production and Quality Control, Process Control and Process Automation. This multi-level system plays an important role in the quality assurance system which generates the highest quality of fuels and other benefits. (author)

  10. From a homemade to an industrial product : manufacturing Bulgarian yogurt

    NARCIS (Netherlands)

    Stoilova, E.R.

    2013-01-01

    Changes in yogurt production in the first half of the twentieth century were related to the transformation of dairy manufacturing through the incorporation of science and technology into the production process. The modernization of the dairy industry affected yogurt, which Bulgarians considered a

  11. Irradiation technology - industrial use

    International Nuclear Information System (INIS)

    Zyball, A.

    1995-01-01

    The most important applications of the radiation technology are the crosslinking of polymers and sterilisation. Although extensive experience about the use of this technology is available and powerful and dependable radiation facilities can be obtained, as yet the radiation technology has not found the acceptance it deserves in the industry. The main reason therefore has to do with how the question of radiation or the term radiation is presented to the industry and among the population. This paper will deal with considerations and ways in which the industrial use of the radiation technology can be expanded. (author)

  12. From domestic manufacture to Industrial Revolution

    DEFF Research Database (Denmark)

    Weisdorf, Jacob Louis

    2006-01-01

    industrial development. An emerging view, however, turns the old story on its head, arguing that agricultural improvement is a response to urban development. This paper follows the line of this emerging view, demonstrating that productivity growth in commercial manufacture is crucial to the performance...

  13. Nuova industria o nuova economia? L'impatto dell'informatica sulla produttività dei settori manifatturieri in Italia (New Industry or New Economy? The Impact of the Information Technology on the Productivity of the Italian Manufacturing Sectors

    Directory of Open Access Journals (Sweden)

    Alfonso Gambardella

    2012-04-01

    Full Text Available This paper employs a sample of 3,525 manufacturing firms in Italy to estimate the impact of investments in Information & Communication Technology (ICT on firms' productivity. The results, which are confirmed by separate estimations for individual industries or groups thereof, support the hypothesis that the ICTs are a general-purpose technology, or a new technological paradigm. This is because, like with electricity, they influence the productivity of firms in many industries, including traditional ones. Moreover, the firms with higher investments in ICTs show higher employment growth. Our results also indicate that there are differences among firms in the propensity to invest in the ICTs, irrespective of their industry.       JEL Codes: L60, D24, L86, G31Keywords: Firm, Investment, Manufacturing, Productivity         

  14. Disruptive Innovation in Manufacturing Engineering towards the 4th Industrial Revolution: 8th International Conference on Digital Enterprise Technology, DET 2014, March 25 -28 2014, Stuttgart, Germany, Abstracts

    OpenAIRE

    Bauer, Wilhelm; Constantinescu, Carmen; Sauer, Olaf; Maropoulos, Paul; Muelaner, Jody

    2014-01-01

    The CIRP sponsored DET 2014 conference focusses on the employment of modern ICT-technologies and tools for the modeling, simulation, optimization, advanced control and monitoring, real-time visualization of products, factories and manufacturing processes. The addressed areas cover all phases of product, factory and manufacturing processes life cycle starting with product design and development, engineering of factories, machines, equipment and technical processes, commissioning and rump-up, f...

  15. The Clean Energy Manufacturing Analysis Center (CEMAC): Providing Analysis and Insights on Clean Technology Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Nicholi S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-28

    The U.S. Department of Energy's Clean Energy Manufacturing Analysis Center (CEMAC) provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Policymakers and industry leaders seek CEMAC insights to inform choices to promote economic growth and the transition to a clean energy economy.

  16. Development of Advanced Ceramic Manufacturing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Pujari, V.K.

    2001-04-05

    Advanced structural ceramics are enabling materials for new transportation engine systems that have the potential for significantly reducing energy consumption and pollution in automobiles and heavy vehicles. Ceramic component reliability and performance have been demonstrated in previous U.S. DOE initiatives, but high manufacturing cost was recognized as a major barrier to commercialization. Norton Advanced Ceramics (NAC), a division of Saint-Gobain Industrial Ceramics, Inc. (SGIC), was selected to perform a major Advanced Ceramics Manufacturing Technology (ACMT) Program. The overall objectives of NAC's program were to design, develop, and demonstrate advanced manufacturing technology for the production of ceramic exhaust valves for diesel engines. The specific objectives were (1) to reduce the manufacturing cost by an order of magnitude, (2) to develop and demonstrate process capability and reproducibility, and (3) to validate ceramic valve performance, durability, and reliability. The program was divided into four major tasks: Component Design and Specification, Component Manufacturing Technology Development, Inspection and Testing, and Process Demonstration. A high-power diesel engine valve for the DDC Series 149 engine was chosen as the demonstration part for this program. This was determined to be an ideal component type to demonstrate cost-effective process enhancements, the beneficial impact of advanced ceramics on transportation systems, and near-term commercialization potential. The baseline valve material was NAC's NT451 SiAION. It was replaced, later in the program, by an alternate silicon nitride composition (NT551), which utilized a lower cost raw material and a simplified powder-processing approach. The material specifications were defined based on DDC's engine requirements, and the initial and final component design tasks were completed.

  17. Manufacturing Technology Support (MATES) II Task Order 0006: Air Force Technology and Industrial Base Research and Analysis. Subtask Order 0004: Study on Supply Chains and Social Media

    Science.gov (United States)

    2013-10-01

    information goldmine for early warning signals of consumer discontent and marketing opportunity. Toyota, Nike , Tyco and Shell are just a few of the many...are using ESN platforms internally to gain efficiencies. While there were very few examples where these solutions are being used in manufacturing...Schaefer of Schaefer Marketing Solutions. Mr. Peters has done extensive work in manufacturing supply chains, with an emphasis on their assembly and

  18. Ergonomic Conditions in Small Manufacturing Industries

    Directory of Open Access Journals (Sweden)

    Ashraf A. Shikdar

    2001-12-01

    Full Text Available Ergonomic conditions in small manufacturing industries were investigated. Twenty seven managers of small manufacturing industries participated in the study. Old equipment and machines, poorly designed workplaces, lack of systematic planning, layout and organization, unsafe working conditions and poor environment were found common to these industries. Fifty-nine percent of companies indicated having equipment older than 15 years. Fifty-two percent of company managers reported receiving complaints of fatigue from their workforce, 41% complaints of back pain, and 33% complaints of upper-body pain. Seventy eight percent of companies reported a noisy environment (above 90 dBA while 63% reported a hot environment. Management in 44% of the companies acknowledged failure to ensure safety rules and 48% did not provide training on manual material handling. Lack of skills in ergonomics and training, communication and resources are believed to be some of the factors contributing to the poor ergonomic conditions in a sample of small manufacturing industries in Malaysia.

  19. Information Technology Industry 2004

    National Research Council Canada - National Science Library

    Altieri, Richard; Buccheit, Nathan; Burke, Kyle; Dillard, Norvel; Dolan, Patrick; Edwards, Gregory; Elins, Daniel; Gaines, Leonard; Goodwin, Steven; Lawrence, Michael

    2004-01-01

    .... This study will define the Information Technology Industry, give an overview of current domestic and international conditions, and then analyze the state of national network security and challenges faced by the U.S. government and U.S...

  20. Industry Service - Technology Centre

    DEFF Research Database (Denmark)

    Hollensen, Svend; Grünbaum, Niels Nolsøe

    2011-01-01

    The chapter describes and explains the development of an Industry Service Technology (IS-T) portal solution at Danfoss for testing of products, including booking system for standardised 'service packages' in order to reduce waiting time....

  1. Industrial communication technology handbook

    CERN Document Server

    Zurawski, Richard

    2014-01-01

    Featuring contributions from major technology vendors, industry consortia, and government and private research establishments, the Industrial Communication Technology Handbook, Second Edition provides comprehensive and authoritative coverage of wire- and wireless-based specialized communication networks used in plant and factory automation, automotive applications, avionics, building automation, energy and power systems, train applications, and more.New to the Second Edition:46 brand-new chapters and 21 substantially revised chaptersInclusion of the latest, most significant developments in spe

  2. Nuclear industry technology boomerang

    International Nuclear Information System (INIS)

    Scholler, R.W.

    1987-01-01

    The benefits to the medical, pharmaceutical, semiconductor, computer, video, bioscience, laser, defense, and numerous high-tech industries from nuclear technology development fallout are indeed numerous and increase every day. Now those industries have made further progress and improvements that, in return, benefit the nuclear industry. The clean-air and particle-free devices and enclosures needed for protection and decontamination are excellent examples

  3. Training Implications of Technological Change in Manufacturing in New Industrial Countries: The Case of Ireland. Training Policies Discussion Paper No. 14.

    Science.gov (United States)

    International Labour Office, Geneva (Switzerland).

    This report on Ireland is one in a series of studies for a research project designed to identify training and education policies pursued by governments and individual firms that have contributed to innovation, technological adaptation, and skill development in manufacturing. Part 1 describes Ireland's economic, social, and educational structure…

  4. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    International Nuclear Information System (INIS)

    Sani, Mohd Shafie; Aziz, Faieza Abdul

    2013-01-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  5. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    Science.gov (United States)

    Shafie Sani, Mohd; Aziz, Faieza Abdul

    2013-06-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  6. Joint R and D in low-carbon technology development in China: A case study of the wind-turbine manufacturing industry

    International Nuclear Information System (INIS)

    Zhou Yuanchun; Zhang Bing; Zou Ji; Bi Jun; Wang Ke

    2012-01-01

    China faces the dual challenges of climate change and increased energy demand. These challenges in turn increase the demand for wind energy development. Along with rapid growth in manufacturing capacity, Chinese companies have aspired to increase their innovation capacity in order to enhance their competitiveness in the market. Joint research and development (R and D) is an attractive path for Chinese companies striving to advance their R and D capacity. This paper examines joint R and D between Chinese wind-turbine manufacturing companies and foreign design firms, assessing the performance of joint R and D activities in China using the structure-conduct-performance (SCP) framework. The study found that joint R and D has improved Chinese companies’ technical capacity, human resources and financial growth. However, the effect on Chinese companies’ innovation capacity is still limited because of unequal technical capacities of the two sides in collaboration, as well as their preference for augmenting profits rather than technical capacity. Current joint R and D mode is only the extension of licensing mode in wind-turbine manufacturing industry. - Highlights: ► Joint R and D is an attractive path for Chinese companies striving to advance R and D capacity. ► We examined the performance of joint R and D in wind-turbine manufacturing industry. ► Joint R and D has improved Chinese companies’ technical capacity. ► The effect of Joint R and D on innovation capacity is still limited.

  7. Training industry needs & Technology Industry needs

    NARCIS (Netherlands)

    Klemke, Roland; Kuula, Timo; Helin, Kaj; Wild, Fridolin

    2017-01-01

    This deliverable joins D1.1 (User Industry Needs) and D1.2 (Technology Industry Needs and Affordances) and reports on the outcomes of Tasks T1.1 (Training Industry Assessment) and T1.2 (Technology Industry Assessment). We merged the deliverables for the following reasons: For readability ease we

  8. Technology Clubs and Growth Patterns: Evidence from EU Manufacturing

    NARCIS (Netherlands)

    Bos, J.W.B.; Economidou, C.; Koetter, M.

    This paper investigates the forces driving output change in a panel of EU manufacturing industries. A flexible modeling strategy is adopted that accounts for (i) inefficient use of resources, and (ii) differences in the production technology across industries. With our model we are able to identify

  9. Advanced Manufacturing Technologies (AMT): Composites Integrated Modeling

    Data.gov (United States)

    National Aeronautics and Space Administration — The Composites Integrated Modeling (CIM) Element developed low cost, lightweight, and efficient composite structures, materials and manufacturing technologies with...

  10. Additive Manufacturing Technology for Biomedical Components: A review

    Science.gov (United States)

    Aimi Zaharin, Haizum; Rani, Ahmad Majdi Abdul; Lenggo Ginta, Turnad; Azam, Farooq I.

    2018-03-01

    Over the last decades, additive manufacturing has shown potential application in ranging fields. No longer a prototyping technology, it is now being utilised as a manufacturing technology for giant industries such as the automotive, aircraft and recently in the medical industry. It is a very successful method that provides health-care solution in biomedical sectors by producing patient-specific prosthetics, improve tissues engineering and facilitate pre-operating session. This paper thus presents a brief overview of the most commercially important additive manufacturing technologies, which is currently available for fabricating biomedical components such as Stereolithography (SLA), Selective Laser Sintering (SLS), Selective Laser Melting (SLM), Fused Deposition Modelling (FDM) and Electron Beam Melting (EBM). It introduces the basic principles of the main process, highlights some of the beneficial applications in medical industry and the current limitation of applied technology.

  11. Blockchain Enhanced Emission Trading Framework in Fashion Apparel Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Bailu Fu

    2018-04-01

    Full Text Available Motivated by the recent blockchain technology originally built for bitcoin transactions, various industries are exploring the opportunities to redefine their existing operational systems. In this study, an innovative environmentally sustainable solution is proposed for the fashion apparel manufacturing industry (FAMI, which is energized by blockchain. Incorporating the Emission Trading Scheme (ETS, and a novel “emission link” system, the proposed framework exposes carbon emission to the public and establishes a feature to reduce the emissions for all key steps of clothing making. Fully compatible with Industry 4.0, blockchain provides decentralization, transparency, automation, and immutability characteristics to the proposed framework. Specifically, the blockchain supported ETS framework, the carbon emissions of clothing manufacturing life cycle, and the emission link powered procedures are introduced in detail. A case study is provided to demonstrate the carbon emission evaluation procedure. Finally, a multi-criteria evaluation is performed to demonstrate the benefits and drawbacks of the proposed system.

  12. A Swiss Manufacturer Sees the Industrial Revolution in England*

    Science.gov (United States)

    Buess, Heinrich

    1962-01-01

    I have recently come across the diaries of Johann Conrad Fischer. These diaries span six decades and cover the years of social, economic, and technological upheaval which marked the industrial revolution in England. The reader is given a picture of these years through the eyes of a Swiss manufacturer with a good perception of history, and his notes are of some value to historians. PMID:13874462

  13. An Assessment of Advanced Manufacturing Technologies Implementation in Manufacturing Enterprises

    Directory of Open Access Journals (Sweden)

    Ghulam Yasin Shaikh

    2011-04-01

    Full Text Available The implementation of AMTs (Advanced Manufacturing Technologies has always been the high interest and core issue for the manufacturing enterprises to get rapid production for global market place. The developed countries have achieved its competitive advantage by implementing this unique model of technologies with full range of systems. In developing countries, the implementation of such technologies is not much common due to so many reasons, (political, social, economical and technical but entrepreneurs of growing economies are contemplating to reshape long term strategy to adopt Computer systems oriented technologies in their manufacturing companies to meet the growing needs of their indigenous market on one hand and to make a place in the international market on the other. Although, very few manufacturing organization do meet the global market requirements. But there is still lot of efforts to be taken for world class competition. An attempt has been made in this paper to develop a conceptual model taking in to account the three parameters such as, Direct, Indirect and Administrative AMTs. This research work further attempts to present an empirical data analysis conducted in the manufacturing enterprises in province of Sindh, Pakistan. The overall indigenous progress of manufacturing enterprises as according to the data collected from 60 companies reveals that the AMTs systems are partially understood and practiced that is also one of the cause towards slow progress of national exchequer.

  14. Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

  15. Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

  16. Technology assessment of automation trends in the modular home industry

    Science.gov (United States)

    Phil Mitchell; Robert Russell Hurst

    2009-01-01

    This report provides an assessment of technology used in manufacturing modular homes in the United States, and that used in the German prefabricated wooden home industry. It is the first step toward identifying the research needs in automation and manufacturing methods that will facilitate mass customization in the home manufacturing industry. Within the United States...

  17. Organizational Considerations for Advanced Manufacturing Technology

    Science.gov (United States)

    DeRuntz, Bruce D.; Turner, Roger M.

    2003-01-01

    In the last several decades, the United States has experienced a decline in productivity, while the world has seen a maturation of the global marketplace. Nations have moved manufacturing strategy and process technology issues to the top of management priority lists. The issues surrounding manufacturing technologies and their implementations have…

  18. Manufacturing technology for practical Josephson voltage normals

    International Nuclear Information System (INIS)

    Kohlmann, Johannes; Kieler, Oliver

    2016-01-01

    In this contribution we present the manufacturing technology for the fabrication of integrated superconducting Josephson serial circuits for voltage normals. First we summarize some foundations for Josephson voltage normals and sketch the concept and the setup of the circuits, before we describe the manufacturing technology form modern practical Josephson voltage normals.

  19. The Extreme-Technology Industry

    Science.gov (United States)

    Hoefflinger, Bernd

    The persistent annual R&D quota of >15% of revenue in the semiconductor industry has been and continues to be more than twice as high as the OECD definition for High-Technology Industry. At the frontiers of miniaturization, the Cost-of-Ownership (COO) continues to rise upwards to beyond 10 billion for a Gigafactory. Only leaders in the world market for selected processors and memories or for foundry services can afford this. Others can succeed with high-value custom products equipped with high-performance application-specific standard products acquired from the leaders in their specific fields or as fabless original-device manufacturers buying wafers from top foundries and packaging/testing from contract manufacturers, thus eliminating the fixed cost for a factory. An overview is offered on the leaders in these different business models. In view of the coming highly diversified and heterogeneous world of nanoelectronic-systems competence, the point is made for global networks of manufacturing and services with the highest standards for product quality and liability.

  20. Regulation, manufacturing and building industry consensus.

    Science.gov (United States)

    Deans, Robert

    2012-11-01

    As has been true with many emerging technologies, successful clinical development and recruitment of capital sufficient to reach market approval is measured as an industry platform. Risk, failure and achievement by individual companies are shared by all in the context of access to enthusiastic capital markets and codevelopment partnerships.

  1. 77 FR 64462 - Conference on International Trade Issues Facing U.S. Machinery Manufacturing Industries

    Science.gov (United States)

    2012-10-22

    ... manufacturing is one of the largest and most competitive sectors of the American manufacturing economy. The... billion in 2011. The economic impact of machinery manufacturing extends throughout the American economy... service industries. Process control and other automation technologies enable end-users to maximize the...

  2. PV Cz silicon manufacturing technology improvements

    Science.gov (United States)

    Jester, T.

    1995-09-01

    This describes work done in the final phase of a 3-y, 3-phase contract to demonstrate cost reductions and improvements in manufacturing technology. The work focused on near-term projects in the SSI (Siemens Solar Industries) Czochralski (Cz) manufacturing facility in Camarillo, CA; the final phase was concentrated in areas of crystal growth, wafer technology, and environmental, safety, and health issues. During this period: (1) The crystal-growing operation improved with increased growth capacity; (2) Wafer processing with wire saws continued to progress; the wire saws yielded almost 50 percent more wafers per inch in production. The wire saws needs less etching, too; (3) Cell processing improvements focused on better handling and higher mechanical yield. The cell electrical distribution improved with a smaller standard deviation in the distribution; and (4) Module designs for lower material and labor costs continued, with focus on a new junction box, larger modules with larger cells, and less costly framing techniques. Two modules demonstrating these cost reductions were delivered during this phase.

  3. The transfer of accelerator technology to industry

    International Nuclear Information System (INIS)

    Favale, A.

    1992-01-01

    The national laboratories and universities are sources for innovative accelerator technology developments. With the growing application of accelerators in such fields as semiconductor manufacturing, medical therapy isotope production, nuclear waste transmutation, materials testing, bomb detection, pure science, etc., it is becoming more important to transfer these technologies and build an accelerator industrial base. In this talk the methods of technology transfer, the issues involved in working with the labs and examples of successful technology transfers are discussed. (Author)

  4. Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

    Science.gov (United States)

    Vickers, John; Fikes, John

    2015-01-01

    The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

  5. Overview of the Photovoltaic Manufacturing Technology (PVMaT) project

    International Nuclear Information System (INIS)

    Witt, C.E.; Mitchell, R.L.; Mooney, G.D.

    1993-08-01

    The Photovoltaic Manufacturing Technology (PVMaT) project is a historic government/industry photovoltaic (PV) manufacturing R ampersand D partnership composed of joint efforts between the federal government (through the US Department of Energy) and members of the US PV industry. The project's ultimate goal is to ensure that the US industry retains and extends its world leadership role in the manufacture and commercial development of PV components and systems. PVMaT is designed to do this by helping the US PV industry improve manufacturing processes, accelerate manufacturing cost reductions for PV modules, improve commercial product performance, and lay the groundwork for a substantial scale-up of US-based PV manufacturing capacities. Phase 1 of the project, the problem identification phase, was completed in early 1991. Phase 2, the problem solution phase, which addresses process-specific problems of specific manufacturers, is now underway with an expected duration of 5 years. Phase 3 addresses R ampersand D problems that are relatively common to a number of PV companies or the PV industry as a whole. These ''generic'' problem areas are being addressed through a teamed research approach

  6. Commercialization of innovative clean technologies : manufacturing know-how in Italian industry; Generazione e diffusione di tecnologie pulite: le esperienze delle imprese italiane

    Energy Technology Data Exchange (ETDEWEB)

    Malaman, S [Istituto per la Ricerca, Milan (Italy); [Fondazione ENI, Enrico Mattei, Milan (Italy); Cima, S [Istituto per la Ricerca Sociale, Milan (Italy)

    1995-06-01

    Last years show an increasing effort of the Italian industry toward the reduction of the environmental impact of both production processes, products utilization and their final disposal. On account of this trend, the target of our research is to understand its general characters. For this reason a database has been implemented on innovative grounds. It provides data on the main innovative clean technologies developed by the Italian industry to cut down external effects (192 clean technologies within 168 companies) and offers a new approach to the issue by turning attention from the company case studies to the technological ones. Thanks to this methodology it is possible to study the companies` strategy according to the legal and industrial environment. Actually this work tries to explain the behaviour of Italian companies related to their perception of the environmental policy, competitors strategy and consumers choice focusing on sectorial, dimensional and geographical distribution of clean technologies. It is also concerned with the analysis of company costs and benefits resulting from the introduction of clean technologies, processes and products together with the capacity of combining environmental with economic targets.

  7. Profiles of Material Supplier Industries to the Automotive Manufacturers

    Science.gov (United States)

    1981-07-01

    This report presents a study of industries supplying materials to the automobile manufacturers. As the automobile industry restructures itself to produce more fuel-efficient vehicles, many of the industries that depend on the automobile will be force...

  8. The Environmental Impact of Advanced Manufacturing Technologies: Examples from Hungary

    OpenAIRE

    Andrea Szalavetz

    2017-01-01

    The purpose of the paper is to demonstrate the beneficial impact of advanced manufacturing technologies (AMT) on firms’ environmental performance. Drawing on interviews conducted with 16 Hungarian manufacturing subsidiaries on their experience with AMT, we find three functional areas, where industry 4.0 solutions can not only enhance operational excellence and cost-efficiency, but they can also improve eco-efficiency, but they can also improve eco-efficiency, namely in the f...

  9. Advanced manufacturing: Technology and international competitiveness

    Energy Technology Data Exchange (ETDEWEB)

    Tesar, A.

    1995-02-01

    Dramatic changes in the competitiveness of German and Japanese manufacturing have been most evident since 1988. All three countries are now facing similar challenges, and these challenges are clearly observed in human capital issues. Our comparison of human capital issues in German, Japanese, and US manufacturing leads us to the following key judgments: Manufacturing workforces are undergoing significant changes due to advanced manufacturing technologies. As companies are forced to develop and apply these technologies, the constituency of the manufacturing workforce (especially educational requirements, contingent labor, job content, and continuing knowledge development) is being dramatically and irreversibly altered. The new workforce requirements which result due to advanced manufacturing require a higher level of worker sophistication and responsibility.

  10. Competitive manufacturing strategies for the manufacturing industries in Turkey

    OpenAIRE

    Ulusoy, Gündüz; Ulusoy, Gunduz

    2003-01-01

    In this study, results of the research into competitive manufacturing strategies of companies in four different sector studies covering 82 companies from the electronics, cement, automotive manufacturers, and appliances part and component suppliers in Turkey are presented. The data used in the study are gathered by conducting four sector surveys in 1997 and 1998 using a questionnaire supported by some follow-up interviews and site visits. A competitive manufacturing strategy is represented he...

  11. Recent Advances in Precision Machinery and Manufacturing Technology

    DEFF Research Database (Denmark)

    Liu, Chien-Hung; Hsieh, Wen-Hsiang; Chang, Zong-Yu

    2014-01-01

    Precision machinery and manufacturing technology are be- coming more important in current and future technologies. New knowledge in this field will aid in the advancement of various technologies that are needed to gain industrial competitiveness. To this end, the special issue aims to disseminate...... the latest advancements of relevant fundamental and applied research works of high quality to the inter- national community. The topics of the accepted articles in the special issue include precision manufacturing pro- cesses, measurements and control, robotics and automation, machine tools, advanced...

  12. Crossword Puzzle Makes It Fun: Introduce Green Manufacturing in Wood Technology Courses

    Science.gov (United States)

    Iley, John L.; Hague, Doug

    2012-01-01

    Sustainable, or "green," manufacturing and its practices are becoming more and more a part of today's industry, including wood product manufacturing. This article provides introductory information on green manufacturing in wood technology and a crossword puzzle based on green manufacturing terms. The authors use the puzzle at the college level to…

  13. Computer integrated manufacturing in the chemical industry : Theory & practice

    NARCIS (Netherlands)

    Ashayeri, J.; Teelen, A.; Selen, W.J.

    1995-01-01

    This paper addresses the possibilities of implementing Computer Integrated Manufacturing in the process industry, and the chemical industry in particular. After presenting some distinct differences of the process industry in relation to discrete manufacturing, a number of focal points are discussed.

  14. Sustainable Manufacturing Practices in Malaysian Automotive Industry: Confirmatory Factor Analysis

    OpenAIRE

    Habidin, Nurul Fadly; Zubir, Anis Fadzlin Mohd; Fuz, Nursyazwani Mohd; Latip, Nor Azrin Md; Azman, Mohamed Nor Azhari

    2015-01-01

    Sustainable manufacturing practices (SMPs) have received enormous attention in current years as an effective solution to support the continuous growth and expansion of the automotive manufacturing industry. This reported study was conducted to examine confirmatory factor analysis for SMP such as manufacturing process, supply chain management, social responsibility, and environmental management based on automotive manufacturing industry. The results of confirmatory factor analysis show that fo...

  15. Offshoring trends in the manufacturing process within the automotive industry

    DEFF Research Database (Denmark)

    Simplay, S.; Hansen, Zaza Nadja Lee

    2014-01-01

    consisting of original equipment manufacturers and engineering service providers. The findings indicated some offshoring trends in the automotive industry. Offshoring in this industry is moving from a manufacturing focus to incorporate large parts of the process, including high-level product development...... engineering activities. This development has created several challenges. These challenges arose as organisations are not considering how offshoring activities could be integrated with an increasingly global supply chain for the manufacturing of the final product. The paper contributes to manufacturing theory...

  16. Computer Technology for Industry

    Science.gov (United States)

    1979-01-01

    In this age of the computer, more and more business firms are automating their operations for increased efficiency in a great variety of jobs, from simple accounting to managing inventories, from precise machining to analyzing complex structures. In the interest of national productivity, NASA is providing assistance both to longtime computer users and newcomers to automated operations. Through a special technology utilization service, NASA saves industry time and money by making available already developed computer programs which have secondary utility. A computer program is essentially a set of instructions which tells the computer how to produce desired information or effect by drawing upon its stored input. Developing a new program from scratch can be costly and time-consuming. Very often, however, a program developed for one purpose can readily be adapted to a totally different application. To help industry take advantage of existing computer technology, NASA operates the Computer Software Management and Information Center (COSMIC)(registered TradeMark),located at the University of Georgia. COSMIC maintains a large library of computer programs developed for NASA, the Department of Defense, the Department of Energy and other technology-generating agencies of the government. The Center gets a continual flow of software packages, screens them for adaptability to private sector usage, stores them and informs potential customers of their availability.

  17. Improving drug manufacturing with process analytical technology.

    Science.gov (United States)

    Rodrigues, Licinia O; Alves, Teresa P; Cardoso, Joaquim P; Menezes, José C

    2006-01-01

    Within the process analytical technology (PAT) framework, as presented in the US Food and Drug Administration guidelines, the aim is to design, develop and operate processes consistently to ensure a pre-defined level of quality at the end of the manufacturing process. Three PAT implementation scenarios can be envisaged. Firstly, PAT could be used in its most modest version (in an almost non-PAT manner) to simply replace an existing quality control protocol (eg, using near-infrared spectroscopy for an in-process quality control, such as moisture content). Secondly, the use of in-process monitoring and process analysis could be integrated to enhance process understanding and operation for an existing industrial process. Thirdly, PAT could be used extensively and exclusively throughout development, scale-up and full-scale production of a new product and process. Although the first type of implementations are well known, reports of the second and third types remain scarce. Herein, results obtained from PAT implementations of the second and third types are described for two industrial processes for preparing bulk active pharmaceutical ingredients, demonstrating the benefits in terms of increased process understanding and process control.

  18. Borated aluminum alloy manufacturing technology

    International Nuclear Information System (INIS)

    Shimojo, Jun; Taniuchi, Hiroaki; Kajihara, Katsura; Aruga, Yasuhiro

    2003-01-01

    Borated aluminum alloy is used as the basket material of cask because of its light weight, thermal conductivity and superior neutron absorbing abilities. Kobe Steel has developed a unique manufacturing process for borated aluminum alloy using a vacuum induction melting method. In this process, aluminum alloy is melted and agitated at higher temperatures than common aluminum alloy fabrication methods. It is then cast into a mold in a vacuum atmosphere. The result is a high quality aluminum alloy which has a uniform boron distribution and no impurities. (author)

  19. Technology transfer and catch-up; Lessons from the commercial aircraft industry

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.; Heerkens, Johannes M.G.

    2007-01-01

    This paper analyses the technology development and technology transfer strategies in the aircraft manufacturing industry for four industrially developing countries. It is concluded from four case studies that technology catch-up is extremely difficult due to aircraft technology characteristics.

  20. New developments in coordinate measuring machines for manufacturing industries

    Directory of Open Access Journals (Sweden)

    Hammad Mian S.

    2014-01-01

    Full Text Available There have been substantial improvements in measurement systems in order to meet fluctuating market demands. This rapid change and development in measurement technology has primarily been governed by demands of accuracy and precision from aerospace, automotive and other manufacturing industries. Coordinate measuring machines (CMMs available with different technologies and configurations has efficiently been fulfilling customer demands for more than a decade. Though, current CMMs can meet needs of rapid and increased demands of customers to a greater extent but still there is lot of scope for improvement and development in CMMs. The globalization of manufacturing has resulted in development of variety of complex products and miniaturization of mechanical components. The technology of micro/nano-scale 3D measurement is still a bottleneck for industries. Therefore, precise and accurate system which is flexible enough to deal with complexities of parts and micro & nano range products has to be investigated. In this paper, comprehensive review concerning CMMs with capabilities to measure micro/nano features has been presented. This work has also discussed different methods to estimate measurement uncertainty, as well as performance evaluation of CMMs. Moreover, novel concepts such as intelligent CMM, multi-sensor CMM, virtual CMM have been presented.

  1. Italian competitiveness in high technology industries

    International Nuclear Information System (INIS)

    Ferrari, S.; Palma, D.; Amendola, G.

    1993-01-01

    A sectoral analysis of 1978-1991 trends in the invention, manufacturing and marketing, in Italy, of high technology goods suggests the need for greater R ampersand D investment by government and private industry and a broadening of the number and type of industries now contributing to the strengthening of this nation's overall high technology industrial base. This is especially the case with regard to the electronics sector in view of the strategic importance of this vital industry and the strong competition being given by the newly industrialized countries located on the Pacific Rim. With reference to the European Communities common market strategies, intended as a buffer against future unified efforts by North American and Pacific Rim countries to consolidate global market share in high technology goods, recent investment trends reveal that Italy's response thus far has been slow and asymmetric

  2. Flexible automation and manufacturing technology

    International Nuclear Information System (INIS)

    Ramakumar, M.S.

    1994-01-01

    Sponsored projects on mobile tele robots, machine vision systems, sensors, pick and place robots for micro electronics, prosthetic devices, surgeons aids, robots for welding and other industrial applications etc. are under development in India. The very significant capabilities in these areas available in our R and D agencies have been inducted into development work in robotics and automation. This is bound to provide an environment and thrust that will result in rapid significant progress. (author). 2 figs

  3. Human Issues in Manufacturing Technology

    Science.gov (United States)

    1992-09-01

    with the following comparison to make his point. Both plants are modern, automated, machine- centered production systems. General Motors ’ Hamtramck...The MIT text draws from 116 research monographs prepared by affiliates of the International Motor Vehicle Program. The study is replete with empirical...Japanese industrial culture. The target for their study was the state-of-the-art Mazda plant in Flat Rock, Michigan. In addition to their treatment of the

  4. Study on the Transformation and Upgrade of E-Commerce Application in Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Zhao Liang

    2017-01-01

    Full Text Available Under the Internet thinking, manufacturing management mode is changed, it is not depend on the scale, but in the user as the center, more dependent on the reaction rate of user requirements. As the big data, cloud computing, Internet of things technology such as the development of technology, manufacturing is from automatic to intelligent evolution, on the user's personalized customization is possible. Using Internet thinking positive development manufacturing enterprise electronic commerce application mode of transformation and upgrading of manufacturing industry plays an important role. Promoting the continued ascent of manufacturing industry informatization level, promote the transformation of the manufacturing production mode, provide greater profit space for the export of products. In industrial 4.0 mode, the user is the core of the enterprise, C2B model will be the mainstream of future manufacturing e-commerce application mode. This paper to present the sorted out the basic model of manufacturing enterprise electronic commerce application, point out the existing problems, and the computing technology, communication technology, the constant development of storage technology, such as background, puts forward the corresponding countermeasure, points out that the C2B model is the development direction of manufacturing enterprise electronic commerce application mode.

  5. Roman iron axes manufacturing technology

    International Nuclear Information System (INIS)

    Barrena, M.I.; Gomez de Salazar, J.M.; Soria, A.

    2008-01-01

    The results of metallographic, chemical and mechanical analysis of two Roman axes are presented. Insights into the technologies used by the Romans are considered. These axes were buried in a Roman village in La Olmeda, Palencia, Spain, which was built around the first century BC and it was later abandoned and destroyed in the fifth century AD. It has been observed that some artefacts, specifically axes show that the technology existed to increase hardness by solid-state welding of sheet steel of different carbon contents

  6. Industrialization of Superconducting RF Accelerator Technology

    Science.gov (United States)

    Peiniger, Michael; Pekeler, Michael; Vogel, Hanspeter

    2012-01-01

    Superconducting RF (SRF) accelerator technology has basically existed for 50 years. It took about 20 years to conduct basic R&D and prototyping at universities and international institutes before the first superconducting accelerators were built, with industry supplying complete accelerator cavities. In parallel, the design of large scale accelerators using SRF was done worldwide. In order to build those accelerators, industry has been involved for 30 years in building the required cavities and/or accelerator modules in time and budget. To enable industry to supply these high tech components, technology transfer was made from the laboratories in the following three regions: the Americas, Asia and Europe. As will be shown, the manufacture of the SRF cavities is normally accomplished in industry whereas the cavity testing and module assembly are not performed in industry in most cases, yet. The story of industrialization is so far a story of customized projects. Therefore a real SRF accelerator product is not yet available in this market. License agreements and technology transfer between leading SRF laboratories and industry is a powerful tool for enabling industry to manufacture SRF components or turnkey superconducting accelerator modules for other laboratories and users with few or no capabilities in SRF technology. Despite all this, the SRF accelerator market today is still a small market. The manufacture and preparation of the components require a range of specialized knowledge, as well as complex and expensive manufacturing installations like for high precision machining, electron beam welding, chemical surface preparation and class ISO4 clean room assembly. Today, the involved industry in the US and Europe comprises medium-sized companies. In Japan, some big enterprises are involved. So far, roughly 2500 SRF cavities have been built by or ordered from industry worldwide. Another substantial step might come from the International Linear Collider (ILC) project

  7. Smart manufacturing systems for Industry 4.0: Conceptual framework, scenarios, and future perspectives

    Science.gov (United States)

    Zheng, Pai; wang, Honghui; Sang, Zhiqian; Zhong, Ray Y.; Liu, Yongkui; Liu, Chao; Mubarok, Khamdi; Yu, Shiqiang; Xu, Xun

    2018-06-01

    Information and communication technology is undergoing rapid development, and many disruptive technologies, such as cloud computing, Internet of Things, big data, and artificial intelligence, have emerged. These technologies are permeating the manufacturing industry and enable the fusion of physical and virtual worlds through cyber-physical systems (CPS), which mark the advent of the fourth stage of industrial production (i.e., Industry 4.0). The widespread application of CPS in manufacturing environments renders manufacturing systems increasingly smart. To advance research on the implementation of Industry 4.0, this study examines smart manufacturing systems for Industry 4.0. First, a conceptual framework of smart manufacturing systems for Industry 4.0 is presented. Second, demonstrative scenarios that pertain to smart design, smart machining, smart control, smart monitoring, and smart scheduling, are presented. Key technologies and their possible applications to Industry 4.0 smart manufacturing systems are reviewed based on these demonstrative scenarios. Finally, challenges and future perspectives are identified and discussed.

  8. Composite fuselage crown panel manufacturing technology

    Science.gov (United States)

    Willden, Kurtis; Metschan, S.; Grant, C.; Brown, T.

    1992-01-01

    Commercial fuselage structures contain significant challenges in attempting to save manufacturing costs with advanced composite technology. Assembly issues, material costs, and fabrication of elements with complex geometry are each expected to drive the cost of composite fuselage structures. Boeing's efforts under the NASA ACT program have pursued key technologies for low-cost, large crown panel fabrication. An intricate bond panel design and manufacturing concepts were selected based on the efforts of the Design Build Team (DBT). The manufacturing processes selected for the intricate bond design include multiple large panel fabrication with the Advanced Tow Placement (ATP) process, innovative cure tooling concepts, resin transfer molding of long fuselage frames, and utilization of low-cost material forms. The process optimization for final design/manufacturing configuration included factory simulations and hardware demonstrations. These efforts and other optimization tasks were instrumental in reducing cost by 18 percent and weight by 45 percent relative to an aluminum baseline. The qualitative and quantitative results of the manufacturing demonstrations were used to assess manufacturing risks and technology readiness.

  9. Benefits from the U.S. photovoltaic manufacturing technology project

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, R.L.; Witt, C.E.; Thomas, H.P. [National Renewable Energy Lab., Golden, CO (United States)] [and others

    1996-05-01

    This paper examines the goals of the Photovoltaic Manufacturing Technology (PVMaT) project and its achievements in recapturing the investment by the photovoltaic (PV) industry and the public in this research. The PVMaT project was initiated in 1990 with the goal of enhancing the world-wide competitiveness of the U.S. PV industry. Based on the authors analysis, PVMaT has contributed to PV module manufacturing process improvements, increased product value, and reductions in the price of today`s PV products. An evaluation of success in this project was conducted using data collected from 10 of the PVMaT industrial participants in late fiscal year (FY) 1995. These data indicate a reduction of 56% in the weighted average module manufacturing costs from 1992 to 1996. During this same period, U.S. module manufacturing capacity has increased by more than a factor of 6. Finally, the analysis indicates that both the public and the manufacturers will recapture the funds expended in R&D manufacturing improvements well before the year 2000.

  10. Visual inspection technology in the hard disc drive industry

    CERN Document Server

    Muneesawang, Paisarn

    2015-01-01

    A presentation of the use of computer vision systems to control manufacturing processes and product quality in the hard disk drive industry. Visual Inspection Technology in the Hard Disk Drive Industry is an application-oriented book borne out of collaborative research with the world's leading hard disk drive companies. It covers the latest developments and important topics in computer vision technology in hard disk drive manufacturing, as well as offering a glimpse of future technologies.

  11. Development of zirconium alloy tube manufacturing technology

    International Nuclear Information System (INIS)

    Kim, In Kyu; Park, Chan Hyun; Lee, Seung Hwan; Chung, Sun Kyo

    2009-01-01

    In late 2004, Korea Nuclear Fuel Company (KNF) launched a government funded joint development program with Westinghouse Electric Co. (WEC) to establish zirconium alloy tube manufacturing technology in Korea. Through this program, KNF and WEC have developed a state of the art facility to manufacture high quality nuclear tubes. KNF performed equipment qualification tests for each manufacturing machine with the support of WEC, and independently carried out product qualification tests for each tube product to be commercially produced. Apart from those tests, characterization test program consisting of specification test and characterization test was developed by KNF and WEC to demonstrate to customers of KNF the quality equivalency of products manufactured by KNF and WEC plants respectively. As part of establishment of performance evaluation technology for zirconium alloy tube in Korea, KNF carried out analyses of materials produced for the characterization test program using the most advanced techniques. Thanks to the accomplishment of the development of zirconium alloy tube manufacturing technology, KNF is expected to acquire positive spin off benefits in terms of technology and economy in the near future

  12. Manufacturing Capacity Utilization and Industrial Development in ...

    African Journals Online (AJOL)

    FIRST LADY

    utilization in the late 1970s was as high as 78.70 percent and nosedived to as low as 43.80 percent in the 1980s. Between ... through a regime of high inflation rate which makes domestic manufacturers and domestic market ... However, inflation and loans and advances to manufacturing were found to have negative effect.

  13. Technological competence and competitiveness of Korea industry

    International Nuclear Information System (INIS)

    Lee, Geun

    1997-06-01

    This book introduces technology and competitiveness and industrial policy of economics, technological competence and technological innovation system of Korea, a newly industrialized country, development of technological innovation and competence of semiconductor industry, development of technological innovation and competence of synthetic fiber industry, development of technological innovation and competence of machine tool industry, development of technological competence of automobile industry, improvement and delay of technological competence of computer industry, and development of technological innovation and competitiveness of appliance industry.

  14. Forest Products Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-04-01

    This document describes the forest products industry's research and development priorities. The original technology roadmap published by the industry in 1999 and was most recently updated in April 2010.

  15. Best Manufacturing Practices: Report of Survey Conducted at Headquarters, U.S. Army Industrial Operations Command, ROck Island, IL

    National Research Council Canada - National Science Library

    Renner, Ernie

    1997-01-01

    This report was produced by the Best Manufacturing Practices (BMP) program, a unique industry and government cooperative technology transfer effort that improves the competitiveness of America's industrial base both here and abroad...

  16. Decade of PV Industry R and D Advances in Silicon Module Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Symko-Davis, M.; Mitchell, R.L.; Witt, C.E.; Thomas, H.P. [National Renewable Energy Laboratory; King, R.[U.S. Department of Energy; Ruby, D.S. [Sandia National Laboratories

    2001-01-18

    The US Photovoltaic (PV) industry has made significant technical advances in crystalline silicon (Si) module manufacturing through the PV Manufacturing R and D Project during the past decade. Funded Si technologies in this project have been Czochralski, cast polycrystalline, edge-defined film-fed growth (EFG) ribbon, string ribbon, and Si-film. Specific R and D Si module-manufacturing categories that have shown technical growth and will be discussed are in crystal growth and processing, wafering, cell fabrication, and module manufacturing. These R and D advancements since 1992 have contributed to a 30% decrease in PV manufacturing costs and stimulated a sevenfold increase in PV production capacity.

  17. Optimizing inventory management in the insulation manufacturing industry

    OpenAIRE

    Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

    2016-01-01

    Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. T...

  18. Cement manufacture and the environment - Part I: Chemistry and technology

    Science.gov (United States)

    Van Oss, H. G.; Padovani, A.C.

    2002-01-01

    Hydraulic (chiefly portland) cement is the binding agent in concrete and mortar and thus a key component of a country's construction sector. Concrete is arguably the most abundant of all manufactured solid materials. Portland cement is made primarily from finely ground clinker, which itself is composed dominantly of hydraulically active calcium silicate minerals formed through high-temperature burning of limestone and other materials in a kiln. This process requires approximately 1.7 tons of raw materials perton of clinker produced and yields about 1 ton of carbon dioxide (CO2) emissions, of which calcination of limestone and the combustion of fuels each contribute about half. The overall level of CO2 output makes the cement industry one of the top two manufacturing industry sources of greenhouse gases; however, in many countries, the cement industry's contribution is a small fraction of that from fossil fuel combustion by power plants and motor vehicles. The nature of clinker and the enormous heat requirements of its manufacture allow the cement industry to consume a wide variety of waste raw materials and fuels, thus providing the opportunity to apply key concepts of industrial ecology, most notably the closing of loops through the use of by-products of other industries (industrial symbiosis). In this article, the chemistry and technology of cement manufacture are summarized. In a forthcoming companion article (part II), some of the environmental challenges and opportunities facing the cement industry are described. Because of the size and scope of the U.S. cement industry, the analysis relies primarily on data and practices from the United States.

  19. A feasibility study for a manufacturing technology deployment center

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  20. Advanced Manufacturing Technologies (AMT): Advanced Near Net Shape Technology

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of the Advanced Near Net Shape Technology (ANNST) project is to radically improve near net shape manufacturing methods from the current...

  1. Photovoltaic technology, performance, manufacturing cost and markets

    International Nuclear Information System (INIS)

    Maycock, P.D.

    1999-01-01

    A comprehensive discussion of key aspects of photovoltaic energy conversion systems will provide the basis for forecasting PV module shipments from 1999 to 2010. Principal areas covered include: (1) Technology and Performance Status: The module efficiency and performance are described for commercial cell technologies including single crystal silicon, polycrystal silicon, ribbon silicon, film silicon on low cost substrate, amorphous silicon, copper indium diselenide, and cadmium telluride; (2) Manufacturing cost: 1999 costs for PV technologies in production (single crystal silicon, polycrystal silicon, and amorphous silicon) are developed. Manufacturing costs for 10--25 MW plants and 100 MW plants will be estimated; (3) The world PV market is summarized by region, top ten companies, and technology; and (4) Forecast of the World Market (seven market sectors) to 2010 will be presented. Key assumptions, price of modules, incentive programs, price of competing electricity generation will be detailed

  2. Emerging Materials Technologies That Matter to Manufacturers

    Science.gov (United States)

    Misra, Ajay K.

    2015-01-01

    A brief overview of emerging materials technologies. Exploring the weight reduction benefit of replacing Carbon Fiber with Carbon Nanotube (CNT) in Polymer Composites. Review of the benign purification method developed for CNT sheets. The future of manufacturing will include the integration of computational material design and big data analytics, along with Nanomaterials as building blocks.

  3. An investigation on the technical standard strategy for China's manufacturing industry

    International Nuclear Information System (INIS)

    Ma Limin; Jiang Xiangqian; Xu Zhengao; Li Zhu

    2005-01-01

    China's manufacturing industry is now the 4th largest manufacturing power in the world, second only to the US, Japan, and Germany. Large but not strong, it is still way behind developed countries. In the technical standard field, the gap between China's manufacturing industry and industrially developed countries is showing that there is a low level of technological standards and lack of professional talent versed in technical standards. A technical standards strategy is of importance to the development of China's manufacturing industry has been as one of the major strategies in the 10th Five-Year Plan period. The overall objective of the strategy for China's technical standards should be capable of supporting Chinese enterprises and products in entering the international market and ensuring the superiority of China's key industries in international competition. The implementing tactics of the strategy are all-round tracking, effective adoption, crucial participation, and strong dominance

  4. 5th International Conference on Advanced Manufacturing Engineering and Technologies

    CERN Document Server

    Jakovljevic, Zivana; NEWTECH2017

    2017-01-01

    This book presents the proceedings from the 5th NEWTECH conference (Belgrade, Serbia, 5–9 June 2017), the latest in a series of high-level conferences that bring together experts from academia and industry in order to exchange knowledge, ideas, experiences, research results, and information in the field of manufacturing. The range of topics addressed is wide, including, for example, machine tool research and in-machine measurements, progress in CAD/CAM technologies, rapid prototyping and reverse engineering, nanomanufacturing, advanced material processing, functional and protective surfaces, and cyber-physical and reconfigurable manufacturing systems. The book will benefit readers by providing updates on key issues and recent progress in manufacturing engineering and technologies and will aid the transfer of valuable knowledge to the next generation of academics and practitioners. It will appeal to all who work or conduct research in this rapidly evolving field.

  5. Additive manufacturing of metals the technology, materials, design and production

    CERN Document Server

    Yang, Li; Baughman, Brian; Godfrey, Donald; Medina, Francisco; Menon, Mamballykalathil; Wiener, Soeren

    2017-01-01

    This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leadin...

  6. Management accounting techniques and corporate performance of manufacturing industries

    Directory of Open Access Journals (Sweden)

    Ardiansyah Rasyid

    2017-03-01

    Full Text Available This research is to investigate that some factors that affect the new adoption in management accounting techniques on the Indonesia manufacturing industries, specifically in Jakarta, Bogor, Depok, Tangerang and Bekasi regions. The research can give a clearer portrait of how some factors can significantly affect the adoption of management accounting techniques. The research used some questioners which were sent to respondents who work in manufacturing industries as a middle level management. The methods used to distribute the questioners to respondents were by door to door, by e-mail and by media telecommunication (what’s app or close relationship up to hundreds questioners. We obtained 45 respondents but we eliminated one respondent, because they are not suitable to the research requirements. The research model contains the two paths. The first path contains 7 variables that divided by six exogenous variables to affect one endogenous variable and the next path model is from the three variables, that are divided to the one mediating variable and the other one exogenous variables to affect one endogenous variable (like path modelling. The research result shows that high competition does not affect the new accounting adoption but the other five variables; cost system changing, technology changes, organization climate, consumer demand and size significantly affect the new accounting adoption. For the next path, the research finds that the new accounting adoption can significantly affect corporate performance and also corporate performance measurement perception.

  7. Handbook on advanced design and manufacturing technologies for biomedical devices

    CERN Document Server

    2013-01-01

    The last decades have seen remarkable advances in computer-aided design, engineering and manufacturing technologies, multi-variable simulation tools, medical imaging, biomimetic design, rapid prototyping, micro and nanomanufacturing methods and information management resources, all of which provide new horizons for the Biomedical Engineering fields and the Medical Device Industry. Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices covers such topics in depth, with an applied perspective and providing several case studies that help to analyze and understand the key factors of the different stages linked to the development of a novel biomedical device, from the conceptual and design steps, to the prototyping and industrialization phases. Main research challenges and future potentials are also discussed, taking into account relevant social demands and a growing market already exceeding billions of dollars. In time, advanced biomedical devices will decisively change methods and resu...

  8. Towards an industrial manufactured morphing trailing edge flap system for wind turbines

    DEFF Research Database (Denmark)

    Aagaard Madsen, Helge; Løgstrup Andersen, Tom; Bergami, Leonardo

    2014-01-01

    tunnel experiment in 2009 with promising results. This led in 2011 to initiation of a new research project INDUFLAP with the main aim to transfer the flap technology to industry as concerns manufacturing and testing. Three industrial partners are participating in the project. Rehau (DE) and Dansk Gummi...

  9. A review of the Technologies Enabling Agile Manufacturing program

    Energy Technology Data Exchange (ETDEWEB)

    Gray, W.H.; Neal, R.E.; Cobb, C.K.

    1996-10-01

    Addressing a technical plan developed in consideration with major US manufacturers, software and hardware providers, and government representatives, the Technologies Enabling Agile Manufacturing (TEAM) program is leveraging the expertise and resources of industry, universities, and federal agencies to develop, integrate, and deploy leap-ahead manufacturing technologies. One of the TEAM program`s goals is to transition products from design to production faster, more efficiently, and at less cost. TEAM`s technology development strategy also provides all participants with early experience in establishing and working within an electronic enterprise that includes access to high-speed networks and high-performance computing and storage systems. The TEAM program uses the cross-cutting tools it collects, develops, and integrates to demonstrate and deploy agile manufacturing capabilities for three high-priority processes identified by industry: material removal, sheet metal forming, electro-mechanical assembly. This paper reviews the current status of the TEAM program with emphasis upon TEAM`s information infrastructure.

  10. Additive manufacturing technology in reconstructive surgery.

    Science.gov (United States)

    Fuller, Scott C; Moore, Michael G

    2016-10-01

    Technological advances have been part and parcel of modern reconstructive surgery, in that practitioners of this discipline are continually looking for innovative ways to perfect their craft and improve patient outcomes. We are currently in a technological climate wherein advances in computers, imaging, and science have coalesced with resulting innovative breakthroughs that are not merely limited to improved outcomes and enhanced patient care, but may provide novel approaches to training the next generation of reconstructive surgeons. New developments in software and modeling platforms, imaging modalities, tissue engineering, additive manufacturing, and customization of implants are poised to revolutionize the field of reconstructive surgery. The interface between technological advances and reconstructive surgery continues to expand. Additive manufacturing techniques continue to evolve in an effort to improve patient outcomes, decrease operative time, and serve as instructional tools for the training of reconstructive surgeons.

  11. Industrial applications of nuclear technology

    International Nuclear Information System (INIS)

    Vargas, Celso

    2010-01-01

    Industrial applications of nuclear technology have been very diverse worldwide. This type of technology has begun to introduce in Costa Rica to evaluate and improve different industrial processes. These applications have been classified into two or three categories, according to the criteria used. Nucleonic control systems, the gamma logging and radiotracers are determined. (author) [es

  12. Cybersecurity for industry 4.0 analysis for design and manufacturing

    CERN Document Server

    Schaefer, Dirk

    2017-01-01

    This book introduces readers to cybersecurity and its impact on the realization of the Industry 4.0 vision. It covers the technological foundations of cybersecurity within the scope of the Industry 4.0 landscape and details the existing cybersecurity threats faced by Industry 4.0, as well as state-of-the-art solutions with regard to both academic research and practical implementations. Industry 4.0 and its associated technologies, such as the Industrial Internet of Things and cloud-based design and manufacturing systems are examined, along with their disruptive innovations. Further, the book analyzes how these phenomena capitalize on the economies of scale provided by the Internet. The book offers a valuable resource for practicing engineers and decision makers in industry, as well as researchers in the design and manufacturing communities and all those interested in Industry 4.0 and cybersecurity.

  13. EUV mask manufacturing readiness in the merchant mask industry

    Science.gov (United States)

    Green, Michael; Choi, Yohan; Ham, Young; Kamberian, Henry; Progler, Chris; Tseng, Shih-En; Chiou, Tsann-Bim; Miyazaki, Junji; Lammers, Ad; Chen, Alek

    2017-10-01

    As nodes progress into the 7nm and below regime, extreme ultraviolet lithography (EUVL) becomes critical for all industry participants interested in remaining at the leading edge. One key cost driver for EUV in the supply chain is the reflective EUV mask. As of today, the relatively few end users of EUV consist primarily of integrated device manufactures (IDMs) and foundries that have internal (captive) mask manufacturing capability. At the same time, strong and early participation in EUV by the merchant mask industry should bring value to these chip makers, aiding the wide-scale adoption of EUV in the future. For this, merchants need access to high quality, representative test vehicles to develop and validate their own processes. This business circumstance provides the motivation for merchants to form Joint Development Partnerships (JDPs) with IDMs, foundries, Original Equipment Manufacturers (OEMs) and other members of the EUV supplier ecosystem that leverage complementary strengths. In this paper, we will show how, through a collaborative supplier JDP model between a merchant and OEM, a novel, test chip driven strategy is applied to guide and validate mask level process development. We demonstrate how an EUV test vehicle (TV) is generated for mask process characterization in advance of receiving chip maker-specific designs. We utilize the TV to carry out mask process "stress testing" to define process boundary conditions which can be used to create Mask Rule Check (MRC) rules as well as serve as baseline conditions for future process improvement. We utilize Advanced Mask Characterization (AMC) techniques to understand process capability on designs of varying complexity that include EUV OPC models with and without sub-resolution assist features (SRAFs). Through these collaborations, we demonstrate ways to develop EUV processes and reduce implementation risks for eventual mass production. By reducing these risks, we hope to expand access to EUV mask capability for

  14. Computer Technology for Industry

    Science.gov (United States)

    1982-01-01

    Shell Oil Company used a COSMIC program, called VISCEL to insure the accuracy of the company's new computer code for analyzing polymers, and chemical compounds. Shell reported that there were no other programs available that could provide the necessary calculations. Shell produces chemicals for plastic products used in the manufacture of automobiles, housewares, appliances, film, textiles, electronic equipment and furniture.

  15. Industrial conflict and its management in selected Nigerian manufacturing companies

    OpenAIRE

    Solaja Oludele Mayowa

    2015-01-01

    This study examined industrial conflict and its management strategies in selected manufacturing companies in Lagos State, Nigeria. The study utilized co-relational survey method which involves the use of structured questionnaire and personal observation to elicit information from the respondents. Participants comprised of staffs of three manufacturing companies in Lagos, Nigeria. Multistage sampling technique was employed in selecting the respondents from the three manufacturing companies und...

  16. Intelligent Manufacturing in the Context of Industry 4.0: A Review

    Directory of Open Access Journals (Sweden)

    Ray Y. Zhong

    2017-10-01

    Full Text Available Our next generation of industry—Industry 4.0—holds the promise of increased flexibility in manufacturing, along with mass customization, better quality, and improved productivity. It thus enables companies to cope with the challenges of producing increasingly individualized products with a short lead-time to market and higher quality. Intelligent manufacturing plays an important role in Industry 4.0. Typical resources are converted into intelligent objects so that they are able to sense, act, and behave within a smart environment. In order to fully understand intelligent manufacturing in the context of Industry 4.0, this paper provides a comprehensive review of associated topics such as intelligent manufacturing, Internet of Things (IoT-enabled manufacturing, and cloud manufacturing. Similarities and differences in these topics are highlighted based on our analysis. We also review key technologies such as the IoT, cyber-physical systems (CPSs, cloud computing, big data analytics (BDA, and information and communications technology (ICT that are used to enable intelligent manufacturing. Next, we describe worldwide movements in intelligent manufacturing, including governmental strategic plans from different countries and strategic plans from major international companies in the European Union, United States, Japan, and China. Finally, we present current challenges and future research directions. The concepts discussed in this paper will spark new ideas in the effort to realize the much-anticipated Fourth Industrial Revolution.

  17. Aluminum Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2003-02-01

    This roadmap describes the industry's R&D strategy, priorities, milestones, and performance targets for achieving its long-term goals. It accounts for changes in the industry and the global marketplace since the first roadmap was published in 1997. An updated roadmap was published November 2001. (PDF 1.1 MB).

  18. Advanced excimer laser technologies enable green semiconductor manufacturing

    Science.gov (United States)

    Fukuda, Hitomi; Yoo, Youngsun; Minegishi, Yuji; Hisanaga, Naoto; Enami, Tatsuo

    2014-03-01

    "Green" has fast become an important and pervasive topic throughout many industries worldwide. Many companies, especially in the manufacturing industries, have taken steps to integrate green initiatives into their high-level corporate strategies. Governments have also been active in implementing various initiatives designed to increase corporate responsibility and accountability towards environmental issues. In the semiconductor manufacturing industry, there are growing concerns over future environmental impact as enormous fabs expand and new generation of equipments become larger and more powerful. To address these concerns, Gigaphoton has implemented various green initiatives for many years under the EcoPhoton™ program. The objective of this program is to drive innovations in technology and services that enable manufacturers to significantly reduce both the financial and environmental "green cost" of laser operations in high-volume manufacturing environment (HVM) - primarily focusing on electricity, gas and heat management costs. One example of such innovation is Gigaphoton's Injection-Lock system, which reduces electricity and gas utilization costs of the laser by up to 50%. Furthermore, to support the industry's transition from 300mm to the next generation 450mm wafers, technologies are being developed to create lasers that offer double the output power from 60W to 120W, but reducing electricity and gas consumption by another 50%. This means that the efficiency of lasers can be improve by up to 4 times in 450mm wafer production environments. Other future innovations include the introduction of totally Heliumfree Excimer lasers that utilize Nitrogen gas as its replacement for optical module purging. This paper discusses these and other innovations by Gigaphoton to enable green manufacturing.

  19. Product waste in the automotive industry : Technology and environmental management

    NARCIS (Netherlands)

    Groenewegen, Peter; Hond, Frank Den

    1993-01-01

    In this article the changes in technology and industry structure forced by waste management in the automotive industry are explored. The analysis is based on (1) a characterisation of corporate response to environmental issues, and (2) the management of technology applied to the car manufacturing

  20. Characterization of cyclical phases in the manufacturing industry in Spain

    OpenAIRE

    Sala, Mercè; Torres, Teresa; Farré, Mariona

    2014-01-01

    Purpose: The purpose of this paper is to characterize the cyclical phases of the manufacturing industry in Spain and detect which industries have more influence on the Spanish business cycle. We assume that economic growth is a priority; we are going to determine which industries have a more/less appropriate cyclical behavior according this priority. We analyze if the industries with better cyclical behavior are the ones that achieve greater co-movement with the business cycle of the Spanish...

  1. Factors that influence the rejection of new manufacturing technologies and concepts

    Science.gov (United States)

    Kristen G. Hoff; Timothy J. Greene; Timothy J. Greene

    1998-01-01

    New manufacturing technologies or concepts often are adopted to improve a firm's competitive advantage over other firms in the same industry. The benefits that a firm expects to receive as a result of that adoption are presumed to outweigh the risk factors that accompany the adoption of a new manufacturing technology. Much research has been conducted to...

  2. Is There A Rural-Urban Technology Gap? Results of the ERS Rural Manufacturing Survey

    OpenAIRE

    Gale, H. Frederick, Jr.

    1997-01-01

    Advanced technology use is less prevalent in rural than in urban manufacturing plants, but plants of comparable size in the same industry use about the same level of technology, regardless of urban/rural location. The rural gap comes about because the mix of rural industries is more heavily weighted with "low-technology" industries. Both rural and urban businesses rate inadequate worker skills as the most important barrier to use of new production technologies and management practices, while ...

  3. Composites Materials and Manufacturing Technologies for Space Applications

    Science.gov (United States)

    Vickers, J. H.; Tate, L. C.; Gaddis, S. W.; Neal, R. E.

    2016-01-01

    Composite materials offer significant advantages in space applications. Weight reduction is imperative for deep space systems. However, the pathway to deployment of composites alternatives is problematic. Improvements in the materials and processes are needed, and extensive testing is required to validate the performance, qualify the materials and processes, and certify components. Addressing these challenges could lead to the confident adoption of composites in space applications and provide spin-off technical capabilities for the aerospace and other industries. To address the issues associated with composites applications in space systems, NASA sponsored a Technical Interchange Meeting (TIM) entitled, "Composites Materials and Manufacturing Technologies for Space Applications," the proceedings of which are summarized in this Conference Publication. The NASA Space Technology Mission Directorate and the Game Changing Program chartered the meeting. The meeting was hosted by the National Center for Advanced Manufacturing (NCAM)-a public/private partnership between NASA, the State of Louisiana, Louisiana State University, industry, and academia, in association with the American Composites Manufacturers Association. The Louisiana Center for Manufacturing Sciences served as the coordinator for the TIM.

  4. Technology transfer and international development: Materials and manufacturing technology

    Science.gov (United States)

    1982-01-01

    Policy oriented studies on technological development in several relatively advanced developing countries were conducted. Priority sectors defined in terms of technological sophistication, capital intensity, value added, and export potential were studied in Brazil, Venezuela, Israel, and Korea. The development of technological policy alternatives for the sponsoring country is assessed. Much emphasis is placed on understanding the dynamics of the sectors through structured interviews with a large sample of firms in the leading manufacturing and materials processing sectors.

  5. USABILITY OF ADDITIVE MANUFACTURING (THREEDIMENSIONAL PRINTING) TECHNOLOGIES IN EDUCATION

    OpenAIRE

    ÖZSOY, KORAY; DUMAN, BURHAN

    2017-01-01

    Additive manufacturing technologies which are emerge in 1980’s years, they are using for prototip production in first time for that reason their denomination rapid prototyping . Nowadays it called additive manufacturing because of it using for end use functional part’s production. In additive manufacturing, the basic rationales the same, but many different technologies have been developed to manufacture with different approaches. The most common additive manufacturing technologies are stereol...

  6. Industrial conflict and its management in selected Nigerian manufacturing companies

    Directory of Open Access Journals (Sweden)

    Solaja Oludele Mayowa

    2015-12-01

    Full Text Available This study examined industrial conflict and its management strategies in selected manufacturing companies in Lagos State, Nigeria. The study utilized co-relational survey method which involves the use of structured questionnaire and personal observation to elicit information from the respondents. Participants comprised of staffs of three manufacturing companies in Lagos, Nigeria. Multistage sampling technique was employed in selecting the respondents from the three manufacturing companies under the study. The data collected were analyzed using descriptive statistic including tables, frequency counts, and percentages as well as mean scores. The findings revealed that the causes of conflict in manufacturing companies in Lagos State, Nigeria include poor means of communicating grievances to top managers, unfavorable economic and industrial policies, poor employee compensation and welfare among others. Therefore, this study concluded that managers should combine strategies such as bargaining, collaboration and avoidance when dealing with industrial conflict to maintain cordial and productive labour-management relationship.

  7. Outsourcing of Logistics Activities in Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Anton Ogorelc

    2012-10-01

    Full Text Available The external supply of logistics se1vices is part of a trend towardoutsourcing non-core logistics activities. The scope ofthird-party logistics may range from a relatively limited combinationof activities (e.g. transportation and warehousing to acomprehensive set of logistics se1vices.The authors first discuss the characteristics of business logisticsin manufacturing indusfly, to be taken into account inlogistics outsourcing. They particularly point out the motimtionsfor logistics outsourcing, the possibilities of outsourcing,as well as supplier selection. Finally they analyze the outsourcingin the reverse logistics.

  8. Product Life Cycle of the Manufactured Home Industry

    Directory of Open Access Journals (Sweden)

    Gavin Wherry

    2014-09-01

    Full Text Available Residential construction consumes an estimated 26 percent of the total U.S. wood harvest and thus plays an important role in the forest products value chain. While being a relatively small part of the U.S. residential construction market, the factory-built residential housing industry, originating from manufactured homes (e.g. mobile homes, is embracing emerging industry segments such as modular or panelized homes. Since indications exist that factory-built home production is slated to gain a more prominent role in the U.S. construction markets at the cost of traditional stick-built production, the factory-built home industry sub-segment is of considerable importance to the forest products industry. This research looks at manufactured home producers as a benchmark for analyzing the current economic state of the industry and discusses competitive strategies. The analysis concludes, through macroeconomic modeling, that manufactured homes are in the declining stage of their product life cycle due to changes to the U.S. residential construction sector and the factory-built home industry and by advancements of rival industry-segments. As market share continues to decline, firms operating in this industry-segment seek to either hedge their losses through product diversification strategies or remain focused on strategically repositioning the manufactured home segment.

  9. Industrie 4.0: Network Formation on a Distributed Manufacturing Project

    Directory of Open Access Journals (Sweden)

    Luiz Fernando Cardoso dos Santos Durão

    2017-09-01

    Full Text Available The integration of modern internet technology and manufacturing technology, which has been denominated Industrie 4.0, allows for distributed manufacturing using additive manufacturing on a global scale with the integration of machines and processes. However, distributed manufacturing poses many challenges for standardization, quality control and management of information in different manufacturing sites. This article aims to investigate the formation of networks in distributed manufacturing projects, identifying the stake-holders and types of connections throughout the project. The methodological approach used was longitudinal action research for a distributed manufacturing project with a focus on flexible manufacturing. The central plant was located in Germany and the supplier located in Brazil, with a partnership between the Polytechnic School of the University of São Paulo and the Technical University of Darmstadt, Germany. The design and engineering that spawned the product model was developed in Germany, while the additive manufacturing site, the structure, and machinery was developed in Brazil, forming a development and distributed manufacturing network. The results showed how organized the communication and knowledge sharing was among those involved in the distributed manufacturing project, as well as an understanding of what kind of knowledge is shared among those involved.

  10. Optimizing inventory management in the insulation manufacturing industry

    DEFF Research Database (Denmark)

    Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

    2016-01-01

    Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between...... service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. This paper contributes with empirical research within operations management in a sector which has not been...

  11. Information Technology Industry 2004

    National Research Council Canada - National Science Library

    Altieri, Richard; Buccheit, Nathan; Burke, Kyle; Dillard, Norvel; Dolan, Patrick; Edwards, Gregory; Elins, Daniel; Gaines, Leonard; Goodwin, Steven; Lawrence, Michael

    2004-01-01

    Forging an unprecedented partnership between the public and private sectors is essential to protect the vital interests of the United States in the wake of the ongoing Information Technology Revolution...

  12. A Technology Selection Framework for Integrating Manufacturing within a Supply Chain

    DEFF Research Database (Denmark)

    Farooq, Sami; O' Brien, Chris

    2012-01-01

    This paper describes a structured analytical approach for selecting a manufacturing technology. A framework consisting of six integrated steps is proposed by considering the growing importance of supply chains in manufacturing organisations. The framework makes use of Analytical Hierarchy (AHP......) approach combined with Strategic Assessment Model (SAM) to evaluate and select the technologies appropriate for providing overall competitive advantage. The framework is intended to assist industrial managers in promoting manufacturing and supply chain collaboration and coordination by including intra...

  13. Research on networked manufacturing system for reciprocating pump industry

    Science.gov (United States)

    Wu, Yangdong; Qi, Guoning; Xie, Qingsheng; Lu, Yujun

    2005-12-01

    Networked manufacturing is a trend of reciprocating pump industry. According to the enterprises' requirement, the architecture of networked manufacturing system for reciprocating pump industry was proposed, which composed of infrastructure layer, system management layer, application service layer and user layer. Its main functions included product data management, ASP service, business management, and customer relationship management, its physics framework was a multi-tier internet-based model; the concept of ASP service integration was put forward and its process model was also established. As a result, a networked manufacturing system aimed at the characteristics of reciprocating pump industry was built. By implementing this system, reciprocating pump industry can obtain a new way to fully utilize their own resources and enhance the capabilities to respond to the global market quickly.

  14. Additive manufacturing technologies of porous metal implants

    Directory of Open Access Journals (Sweden)

    Yang Quanzhan

    2014-06-01

    Full Text Available Biomedical metal materials with good corrosion resistance and mechanical properties are widely used in orthopedic surgery and dental implant materials, but they can easily cause stress shielding due to the significant difference in elastic modulus between the implant and human bones. The elastic modulus of porous metals is lower than that of dense metals. Therefore, it is possible to adjust the pore parameters to make the elastic modulus of porous metals match or be comparable with that of the bone tissue. At the same time, the open porous metals with pores connected to each other could provide the structural condition for bone ingrowth, which is helpful in strengthening the biological combination of bone tissue with the implants. Therefore, the preparation technologies of porous metal implants and related research have been drawing more and more attention due to the excellent features of porous metals. Selective laser melting (SLM and electron beam melting technology (EBM are important research fields of additive manufacturing. They have the advantages of directly forming arbitrarily complex shaped metal parts which are suitable for the preparation of porous metal implants with complex shape and fine structure. As new manufacturing technologies, the applications of SLM and EBM for porous metal implants have just begun. This paper aims to understand the technology status of SLM and EBM, the research progress of porous metal implants preparation by using SLM and EBM, and the biological compatibility of the materials, individual design and manufacturing requirements. The existing problems and future research directions for porous metal implants prepared by SLM and EBM methods are discussed in the last paragraph.

  15. The Environmental Impact of Advanced Manufacturing Technologies: Examples from Hungary

    Directory of Open Access Journals (Sweden)

    Andrea Szalavetz

    2017-06-01

    Full Text Available The purpose of the paper is to demonstrate the beneficial impact of advanced manufacturing technologies (AMT on firms’ environmental performance. Drawing on interviews conducted with 16 Hungarian manufacturing subsidiaries on their experience with AMT, we find three functional areas, where industry 4.0 solutions can not only enhance operational excellence and cost-efficiency, but they can also improve eco-efficiency, but they can also improve eco-efficiency, namely in the field of quality management (through smart production control, data analytics and predictive modelling solutions; process optimization (through capacity planning and production scheduling solutions; and product and process engineering (through advanced virtual technologies. We also find that AMT adoption facilitated subsidiary upgrading along various dimensions. The main managerial implication is that subsidiaries need to be proactive, and emphasize also the benefits stemming from energy and resource efficiency improvement when lobbying for investment in AMT.

  16. Stimulating Manufacturing Excellence through University-Industry Interaction

    DEFF Research Database (Denmark)

    Riis, Jens Ove

    2001-01-01

    This paper considers what a university engineering school can do to stimulate manufacturing excellence in industry. Aalborg University, with its unique use of problem-based learning methods, is used as a case example. This approach is also embedded in a new research initiative, the Centre...... for Industrial Production. Examples of industry involvement in research and development projects are given. Such university–industry collaboration will not only benefit the development of competencies in large and small industrial enterprises, but will also provide a laboratory setting for the study...

  17. 48 CFR 235.006-70 - Manufacturing Technology Program.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Manufacturing Technology... CONTRACTING 235.006-70 Manufacturing Technology Program. In accordance with 10 U.S.C. 2521(d), for acquisitions under the Manufacturing Technology Program— (a) Award all contracts using competitive procedures...

  18. Safety climate practice in Korean manufacturing industry

    International Nuclear Information System (INIS)

    Baek, Jong-Bae; Bae, Sejong; Ham, Byung-Ho; Singh, Karan P.

    2008-01-01

    Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended

  19. Safety climate practice in Korean manufacturing industry.

    Science.gov (United States)

    Baek, Jong-Bae; Bae, Sejong; Ham, Byung-Ho; Singh, Karan P

    2008-11-15

    Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended.

  20. Safety climate practice in Korean manufacturing industry

    Energy Technology Data Exchange (ETDEWEB)

    Baek, Jong-Bae [Department of Safety Engineering, Chungju National University, Chungju 380-702 (Korea, Republic of); Bae, Sejong [Department of Biostatistics, University of North Texas Health Science Center, 3500 Camp Bowie Boulevard, Fort Worth, TX 76107 (United States)], E-mail: sbae@hsc.unt.edu; Ham, Byung-Ho [Department of Industrial Safety, Ministry of Labor (Korea, Republic of); Singh, Karan P. [Department of Biostatistics, University of North Texas Health Science Center, 3500 Camp Bowie Boulevard, Fort Worth, TX 76107 (United States)

    2008-11-15

    Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended.

  1. Study, design and manufacture eddy current probes for industry applications

    International Nuclear Information System (INIS)

    Nguyen Phuc; Nguyen Van Thuy; Vuong Binh Duong; Do Minh Duc; Trinh Dinh Truong; Tran Trong Duc; Do Tung Khanh; Dang Quang Trung

    2016-01-01

    This study is based on the studying, designing and manufacturing of eddy current probes for industry applications. The main tasks of this study include: i) Describes the overview and classification of eddy current probes (which can be classified into three categories based on the mode of operation: absolute eddy current probe, differential eddy current probe and reflect eddy current probe); ii) Describes the three methods of probe designing and manufacturing (including experimental, analytical and numerical designs); iii) Describes the designing and manufacturing of eddy current probes for industry applications, which based on experimental and analytical methods. Based on this study, we have successfully manufactured some current probes (including absolute eddy current probe, differential eddy current probe and reflect eddy current probe) for surface and tube inspections. (author)

  2. Advanced manufacturing technologies modern machining, advanced joining, sustainable manufacturing

    CERN Document Server

    2017-01-01

    This book provides details and collective information on working principle, process mechanism, salient features, and unique applications of various advanced manufacturing techniques and processes belong. The book is divided in three sessions covering modern machining methods, advanced repair and joining techniques and, finally, sustainable manufacturing. The latest trends and research aspects of those fields are highlighted.

  3. Nuclear engineering training and advanced training at universities and in manufacturing industries

    International Nuclear Information System (INIS)

    Sauer, A.

    1984-01-01

    The lecture describes: the qualification of the staff of one nuclear power plant building company, the structure of university studies in the Federal Republic of Germany, in the USA and in the GDR, technical colleges, continuation studies, in-service training in the manufacturing industry, training programmes for short-term benefits, training of German and foreign operating personnel by the manufacturers, training within the framework of technology transfer. (HSCH) [de

  4. The economic value of LNG in the Korean manufacturing industry

    International Nuclear Information System (INIS)

    Park, Sun-Young; Yoo, Seung-Hoon

    2013-01-01

    Although LNG is an important input to industrial production for manufacturing firms, its economic value has been rarely investigated in the literature. This paper attempts to estimate the economic value of LNG in Korea's manufacturing sector by employing the concept of the value of marginal product (VMP). For this, we used data on 328 firms using LNG as an input. Two types of production functions (the Cobb–Douglas and trans-log functions) are applied. The result of the specification test indicates that the trans-log function is more appropriate for estimating the data. The output elasticity and VMP of industrial LNG are estimated to be 0.1346 and KRW 6844 (USD 6.22) per m 3 , respectively. The results have important implications for various areas of industrial LNG management. For example, any cost–benefit analysis of new projects providing industrial LNG requires information on the economic value of industrial LNG. In addition, such information is useful for the Korean government's future policies on LNG pricing. - Highlights: • We estimate the economic value of LNG in the Korean manufacturing industry. • We employ the concept of the value of marginal product (VMP). • The VMP of industrial LNG is estimated to be KRW 6844 (USD 6.22) per m 3 . • It significantly outweighs the price of industrial LNG (KRW 629.4 per m 3 )

  5. Theorizing about technological development of manufacturing companies

    DEFF Research Database (Denmark)

    Matthiesen, Rikke Vestergaard

    2012-01-01

    The aim of the paper is to apply metatriangulation and theory building to strengthen our theorizing on technological development of manufacturing firms. AMT literature is reviewed and by means of bracketing, the paper identifies a set of problematic assumptions embedded within traditional AMT...... research. A case study is used to emphasize how a process perspective enriches the traditional structural perspective. Finally, through first attempts at theory building, a set of propositions is suggested in order to overcome long-standing problems found in AMT research....

  6. Towards a Lifecycle Information Framework and Technology in Manufacturing.

    Science.gov (United States)

    Hedberg, Thomas; Feeney, Allison Barnard; Helu, Moneer; Camelio, Jaime A

    2017-06-01

    Industry has been chasing the dream of integrating and linking data across the product lifecycle and enterprises for decades. However, industry has been challenged by the fact that the context in which data is used varies based on the function / role in the product lifecycle that is interacting with the data. Holistically, the data across the product lifecycle must be considered an unstructured data-set because multiple data repositories and domain-specific schema exist in each phase of the lifecycle. This paper explores a concept called the Lifecycle Information Framework and Technology (LIFT). LIFT is a conceptual framework for lifecycle information management and the integration of emerging and existing technologies, which together form the basis of a research agenda for dynamic information modeling in support of digital-data curation and reuse in manufacturing. This paper provides a discussion of the existing technologies and activities that the LIFT concept leverages. Also, the paper describes the motivation for applying such work to the domain of manufacturing. Then, the LIFT concept is discussed in detail, while underlying technologies are further examined and a use case is detailed. Lastly, potential impacts are explored.

  7. Total quality through computer integrated manufacturing in the pharmaceutical industry.

    Science.gov (United States)

    Ufret, C M

    1995-01-01

    The role of Computer Integrated Manufacturing (CIM) in the pursue of total quality in pharmaceutical manufacturing is assessed. CIM key objectives, design criteria, and performance measurements, in addition to its scope and implementation in a hierarchical structure, are explored in detail. Key elements for the success of each phase in a CIM project and a brief status of current CIM implementations in the pharmaceutical industry are presented. The role of World Class Manufacturing performance standards and other key issues to achieve full CIM benefits are also addressed.

  8. Development of Self-Luminous Glass Tube (SLGT) Manufacturing Technology

    International Nuclear Information System (INIS)

    Kim, Kwang Sin; Kim, Kyeong Sook; Chung, Eun Su; Song, Kyu Min; Lee, Sook Kyung; Son, Soon Hwan

    2005-01-01

    Tritium produced from the Wolsong Tritium Removal Facility (WTRF) will be a radioactive waste when it is stored in the vault inside the WTRF, which requires maintenance cost and is a troublesome waste such that it cannot be sent to the radioactive waste disposal facility. However, when tritium is utilized it can be valuable resource for many applications. As a starting point to utilize tritium we tried to domesticate the selfluminous glass tube (SLGT) manufacturing technology. As a hydrogen isotope, tritium has similar chemical properties to hydrogen but slightly different physical properties. Due to its unstable nature, tritium emits beta rays, which are streams of electrons, with 0∼18.6 keV (5.7 keV in average) energies and 12.323 years of a half-life. The energy level of tritium is relatively low and the biological effects of tritium to the human body are not significant, which makes tritium a popular radioactive isotope for use in industries. The electrons in a beta ray collide with phosphor to produce light so that tritium sealed in phosphor coated glass tubes can make the tubes glow without an external supply of energy. To manufacture these SLGTs, 4 core technologies are needed: coating technology, tritium injection technology, laser sealing/cutting technology and tritium handling technology

  9. Technology Sharing in Manufacturing Business Groups

    DEFF Research Database (Denmark)

    Sköld, Martin; Karlsson, Christer

    2012-01-01

    , consultants, partners, and others. However, the distinction between the focal firm, on the one hand, and networks, on the other, is in this paper argued to be too extensive without intermediating nuances. Less focus is given to an in-between perspective configured by business groups or concerns here defined...... as parent corporations with subsidiary companies. It is this perspective of business groups with characteristics between individual firms and open networks that is of interest in this paper. The focus is on manufacturing business groups in which the companies will typically have individual as well as common......Technology represents the primordial force for companies and organizations in securing long-term competitiveness. In the intensive search to access new technology, organizations are more and more looking beyond the borders of the focal firm and becoming involved in various networks with suppliers...

  10. Advanced Manufacturing Technologies (AMT): Modular Rapidly Manufactured SmallSat

    Data.gov (United States)

    National Aeronautics and Space Administration — Utilize advanced manufacturing processes to design and fabricate a fully functional prototype flight model, with the goal of demonstrating rapid on-orbit assembly of...

  11. Characterization of cyclical phases in the manufacturing industry in Spain

    Directory of Open Access Journals (Sweden)

    Mercè Sala

    2014-09-01

    Full Text Available 120 Purpose: The purpose of this paper is to characterize the cyclical phases of the manufacturing industry in Spain and detect which industries have more influence on the Spanish business cycle. We assume that economic growth is a priority; we are going to determine which industries have a more/less appropriate cyclical behavior according this priority. We analyze if the industries with better cyclical behavior are the ones that achieve greater co-movement with the business cycle of the Spanish economy, as this means they have a positive influence on economic activity. Design/methodology/approach: We examine the disaggregated quarterly IPI data of 16 manufacturing industries. Our methodology follows three steps. Firstly, we define cycle turning points; we follow the Harding and Pagan (2002 methodology. Secondly, we characterize the cyclical phases of the manufacturing industries in terms of duration, amplitude, deepness and steepness. We also determine the degree of inter-industrial cyclical synchronization and between industries in the cycle of the Spanish economy. This analysis is performed in two ways. On the one hand, we use the concordance index and the correlation coefficient. On the other hand, we work with indicators based on a consistency table. In the Third step, we apply a multi-objective methodology, specifically the compromise programming, to determine which industries have a more/less appropriate cyclical behavior according to the growth priority. Findings and Originality/value: The business cycle of the Spanish economy is positively influenced by high- and medium-tech industries, which have demonstrated their competitive capacity in international markets, and by medium- low-tech industries, with major strengths in R&D, and in survival and consolidation strategies. These results enable manufacturing industries to exert a positive effect on the business cycle that is weakened because many of them show a high correlation between

  12. Locally manufactured wind power technology for sustainable rural electrification

    International Nuclear Information System (INIS)

    Leary, J.; While, A.; Howell, R.

    2012-01-01

    To date, the use of wind power for rural electrification has been limited. However the fact that micro-wind turbines can be manufactured using only basic workshop tools, techniques and materials, and therefore can be produced locally is often overlooked. Local manufacture has the potential to boost the local economy, build local capacity, reduce costs and produce resilient and flexible energy systems. However, locally manufactured technology must be seen as socially embedded due to the variety of local knowledge, skills, equipment and materials needed to construct and maintain such systems, as well as the organisational structures needed to ensure their long term sustainability. Evidence from successful initiatives suggests that stable institutional support from intermediaries such as the local/national government or NGOs is necessary to foster the development of a wind power industry based on local manufacture. The roles of these intermediaries include identifying and targeting windy areas with favourable environmental conditions, conducting research and development, collecting feedback from end users, creating supply chains for new parts and materials and developing relevant knowledge and skills. In this paper, three case studies of specific initiatives are analysed to draw out the social, economic and technical factors that could facilitate wider adoption of the technology. - Highlights: ► Local manufacture of wind turbines often overlooked for rural electrification. ► Flexible to adapt to local context and benefits local economy, capacity and supply chain. ► Development of technology discussed and 3 case studies of dissemination analysed. ► Critical factors: institutional support, system level planning, continuity of supply. ► Dissemination successful in Inner Mongolia; work continues elsewhere.

  13. Operating Costs Reducing in MDF Manufacturing Industries

    Directory of Open Access Journals (Sweden)

    José Augusto Coeve Florino

    2014-05-01

    Full Text Available The sustained efforts by electric motors when subjected to cutting, trimming or finishing are directly related to the material being machined and the angle of attack of the tool. Choosing the right tool for this operation depends on an expected result. So the engines behave differently to each operation. The optimization between strength, speed, power, material and type of operation, can be found to reduce operational costs of production, besides determining the exact time to make the set-up of worn tool. The reduction in operating costs is an item of sustainability that outlines the strategic positioning on companies to become competitive in the global marketplace. With the great technological development present today, this issue goes away with the very latest products on the market for professionals who productivity will be dealt with in these modern maintenance equipment such as power quality analyzer, Imager, profile projector and microscope for research. The result of this work is the optimization of the cutting operation and energy consumption thereby demonstrating an optimum point of operation in a case study presented in this work.

  14. Recycling industrial waste in brick manufacture. Part 1

    Directory of Open Access Journals (Sweden)

    Andreola, F.

    2005-12-01

    Full Text Available The ongoing accumulation of industrial waste speaks to the need to seek cost-effective disposal methods. Brick manufacture would appear to be particularly promising in this regard. The present study analyzes the possibility of recycling the sludge generated in porcelain tile polishing, as well as coal, steel and municipal incinerator ash to make a special type of facing brick whose properties readily accommodate a full analysis of all the problems deriving from the incorporation of residue in its manufacture. Physical-chemical, mechanical and structural analyses were performed on bricks made with varying percentages of the different types of waste considered. This first paper reports the results of the physical arid technological characterization of the products; the second part of the research will address their chemical, mechanical and structural properties.

    El continuo aumento de la cantidad de residuos (desechos que se generan en los procesos industriales induce a buscar nuevos métodos alternativos a la disposición final que sean altamente eficientes y a bajo costo. La industria manufac turera de ladrillos resulta muy prometedora desde este punto de vista. En este trabajo ha sido investigada la posibilidad de usar distintos residuos industriales, entre ellos barros de pulido del gres porcelánico. cenizas de carbón, cenizas de acerías y de incinerador municipal para la fabricación de ladrillos de exteriores. Fueron analizados los problemas que podrían derivar al introducir estos residuos en la pasta. En particular, en esta primera parte del trabajo se muestran los resultados derivados de la introducción de los residuos considerados, en distintos porcentajes, sobre las propiedades físicas y tecnológicas del producto final. En la segunda parte se desarrollarán los efectos causados sobre las propiedades químicas, mecánicas y microestructurales.

  15. On the future of safety in the manufacturing industry

    OpenAIRE

    Reniers, G.

    2017-01-01

    Abstract: This paper argues that a new paradigm is needed in the manufacturing industry to further substantially advance safety as part of the industry 4.0 concept. The different domains that need to be focused upon are Cluster-thinking and cooperation, High transparency and efficient inspections, Education and training, Security integration, and Safety innovation. Since society has fundamentally changed over the last two decades, revolutionizing safety via these domains is truly needed in th...

  16. JT-60SA TF magnet industrial manufacturing preparation and qualifications

    International Nuclear Information System (INIS)

    Decool, P.; Cloez, H.; Gros, G.; Marechal, J.L.; Torre, A.; Verger, J.M.; Nusbaum, M.; Billotte, G.; Crepel, B.; Bourquard, A.; Davis, S.; Phillips, G.

    2014-01-01

    The general design of the JT-60SA toroidal field system was defined in agreement with all the participants in the project (CEA, ENEA, F4E), the detailed design was issued by the Voluntary Contributors. For the French part including the procurement of 9 of the 18 TF winding packs and their integration in the casings, an industrial contract was signed mid-2011 with Alstom (France). After agreement on manufacturing drawings and QA documentation, the manufacturing process was defined giving the guidelines for the workshop organization and the definition of the required tooling. The critical manufacturing points were identified in the process and, regarding technical requirements, have led to the definition of a set of qualification mockups. They are related to helium inlets, conductor winding and insulation, local conductor bending, electrical joint and terminal areas for the winding pack (WP), as well as winding embedding, case welding, and impregnations for WP integration in the casing. The fabrication processes have been improved and shall be qualified thanks to the manufacture and testing of 12 corresponding mockups. The successful achievement of several key mock-ups gives confidence in the feasibility of the manufacture, and their completion will give the green light to the industrial coils manufacture. (authors)

  17. Promotion of an indigenous manufacturing industry in the UK

    International Nuclear Information System (INIS)

    Anderson, C.

    1998-01-01

    Of the large European wind energy markets, that of the UK is uniquely dominated by imported technology. An indigenous manufacturing base is desirable for strategic reasons, and to create employment and export opportunities. Analysis of the wind energy policies of other countries indicates the factors required to stimulate local manufacture. This paper examines how UK wind energy policy may be shaped for this purpose, taking account of the lessons learned under NFFO/SRO, and elsewhere in Europe. (Author)

  18. Report on achievement in the preceding research related to global industry technologies for the global industry technology research and development project. Research on gas systems substituting global warming gases such as PFC used in manufacturing semiconductors; 1998 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu. Handotai seizo nado ni shiyosuru PFC nado no chikyu ondanka gas no daitai gas system no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The present semiconductor manufacturing process uses a great amount of PFC having large global warming coefficients and extremely long atmospheric life. A research was made particularly on reduction of its emission from etching processes. After introducing how the semiconductor industry has been working conventionally on protection of the global environment, this paper makes clear the purpose and positioning of this preceding research, as well as how it is moved forward. The paper also reports the results of analyzing and discussing the exhaust gases from etching devices using several kinds of substitute PFC gases. Survey results are reported on the possibilities of new substitute gases, plasma decomposition and treatment of exhaust gases, reaction process simulation, and in-situ analyzing and evaluating technologies. Investigations were made on the possibility of using no PFC in wiring processes which consume greater amount of PFC, as well as on wiring techniques using inter-layer insulation film with low dielectric rate, a new wiring structure forming technology, new functional elements, circuits and systems in a wide range. Proposals were given on specific research and development themes and plans that begin in fiscal 1999. (NEDO)

  19. Implementing the South African additive manufacturing technology roadmap - the role of an additive manufacturing centre of competence

    Directory of Open Access Journals (Sweden)

    Du Preez, Willie Bouwer

    2015-08-01

    Full Text Available The Rapid Product Development Association of South Africa (RAPDASA expressed the need for a national Additive Manufacturing Roadmap. Consequentially, the South African Department of Science and Technology commissioned the development of a South African Additive Manufacturing Technology Roadmap. This was intended to guide role-players in identifying business opportunities, addressing technology gaps, focusing development programmes, and informing investment decisions that would enable local companies and industry sectors to become global leaders in selected areas of additive manufacturing. The challenge remains now for South Africa to decide on an implementation approach that will maximize the impact in the shortest possible time. This article introduces the concept of a national Additive Manufacturing Centre of Competence (AMCoC as a primary implementation vehicle for the roadmap. The support of the current leading players in additive manufacturing in South Africa for such a centre of competence is shared and their key roles are indicated. A summary of the investments that the leading players have already made in the focus areas of the AMCoC over the past two decades is given as confirmation of their commitment towards the advancement of the additive manufacturing technology. An exposition is given of how the AMCoC could indeed become the primary initiative for achieving the agreed national goals on additive manufacturing. The conclusion is that investment by public and private institutions in an AMCoC would be the next step towards ensuring South Africa’s continued progress in the field.

  20. Customer-driven manufacturing in the food processing industry

    NARCIS (Netherlands)

    Donk, D.P. van

    2000-01-01

    Food processing industry copes with high logistical demands from its customers. This paper studies a company changing to more customer (order) driven manufacturing. In order to help decide which products should be made to order and which made to stock, a frame is developed and applied to find and

  1. Labor Agency in the Football Manufacturing Industry of Sialkot, Pakistan

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter

    2013-01-01

    be highly gendered and tends to be more constrained than facilitated by both vertical forces (the governance of GPNs) and horizontal forces (local socio-economic and labor market contexts). This is done through a case study of labor agency in the football manufacturing industry of Sialkot, Pakistan....

  2. SMEs in the Philippine Manufacturing Industry and Globalization: Meeting the Development Challenges

    OpenAIRE

    Aldaba, Rafaelita M.

    2008-01-01

    In recognition of their substantial contribution to the economy both in terms of number of enterprises and workers, the Philippine government has put in place a number of policies and programs designed specifically to boost SME productivity and competitiveness in the country. However, the performance of SMEs in the last decade has not been vigorous enough to boost the Philippine manufacturing industry. As such, the deepening of high technology industries in terms of the creation of backward l...

  3. Honeycomb technology materials, design, manufacturing, applications and testing

    CERN Document Server

    Bitzer, Tom

    1997-01-01

    Honeycomb Technology is a guide to honeycomb cores and honeycomb sandwich panels, from the manufacturing methods by which they are produced, to the different types of design, applications for usage and methods of testing the materials. It explains the different types of honeycomb cores available and provides tabulated data of their properties. The author has been involved in the testing and design of honeycomb cores and sandwich panels for nearly 30 years. Honeycomb Technology reflects this by emphasizing a `hands-on' approach and discusses procedures for designing sandwich panels, explaining the necessary equations. Also included is a section on how to design honeycomb energy absorbers and one full chapter discussing honeycomb core and sandwich panel testing. Honeycomb Technology will be of interest to engineers in the aircraft, aerospace and building industries. It will also be of great use to engineering students interested in basic sandwich panel design.

  4. Inter- and intra-industry variations of capital structure in the Czech manufacturing industry

    Directory of Open Access Journals (Sweden)

    Pavlína Pinková

    2013-01-01

    Full Text Available The objective of the paper is to investigate the existence of inter-industry variations in the capital structure of enterprises of the Czech manufacturing industry and to identify the intra-industry causes of these differences. Three measures of capital structure are employed to determine the inter-industry variations. These are total debt ratio, long-term debt and short-term debt ratios. The set of explanatory variables is included to clarify the intra-industry variations. These explanatory variables are size, asset structure, asset utilization, profitability, non-debt tax shield and growth. The paper reports the analysis of capital structure of five distinctive industrial branches, namely the manufacture of beverages, the manufacture of textiles, the manufacture of paper and paper products, the manufacture of chemicals and chemical products, and the manufacture of computer, electronic and optical products. The data come from the financial statements of selected companies and cover a period from 2008 to 2012. The analysis of variance, correlation and regression analyses are used to develop the statistical framework. The paper aims to study the impact of industry and firm characteristics on capital structure choice.

  5. An Introduction to Intelligent Processing Programs Developed by the Air Force Manufacturing Technology Directorate

    Science.gov (United States)

    Sampson, Paul G.; Sny, Linda C.

    1992-01-01

    The Air Force has numerous on-going manufacturing and integration development programs (machine tools, composites, metals, assembly, and electronics) which are instrumental in improving productivity in the aerospace industry, but more importantly, have identified strategies and technologies required for the integration of advanced processing equipment. An introduction to four current Air Force Manufacturing Technology Directorate (ManTech) manufacturing areas is provided. Research is being carried out in the following areas: (1) machining initiatives for aerospace subcontractors which provide for advanced technology and innovative manufacturing strategies to increase the capabilities of small shops; (2) innovative approaches to advance machine tool products and manufacturing processes; (3) innovative approaches to advance sensors for process control in machine tools; and (4) efforts currently underway to develop, with the support of industry, the Next Generation Workstation/Machine Controller (Low-End Controller Task).

  6. Energy resource management for energy-intensive manufacturing industries

    Energy Technology Data Exchange (ETDEWEB)

    Brenner, C.W.; Levangie, J.

    1981-10-01

    A program to introduce energy resource management into an energy-intensive manufacturing industry is presented. The food industry (SIC No. 20) was chosen and 20 companies were selected for interviews, but thirteen were actually visited. The methodology for this program is detailed. Reasons for choosing the food industry are described. The substance of the information gained and the principal conclusions drawn from the interviews are given. Results of the model Energy Resource Management Plan applied to three companies are compiled at length. Strategies for dissemination of the information gained are described. (MCW)

  7. Development of High Temperature Capacitor Technology and Manufacturing Capability

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2011-05-15

    The goal of the Development of High Temperature Capacitor Technology and Manufacturing Capability program was to mature a production-ready supply chain for reliable 250°C FPE (fluorinated polyester) film capacitors by 2011. These high-temperature film capacitors enable both the down hole drilling and aerospace industries by enabling a variety of benefits including: - Deeper oil exploration in higher temperature and pressure environments - Enabling power electronic and control equipment to operate in higher temperature environments - Enabling reduced cooling requirements of electronics - Increasing reliability and life of capacitors operating below rated temperature - Enabling capacitors to handle higher electrical losses without overheating. The key challenges to bringing the FPE film capacitors to market have been manufacturing challenges including: - FPE Film is difficult to handle and wind, resulting in poor yields - Voltage breakdown strength decreases when the film is wound into capacitors (~70% decrease) - Encapsulation technologies must be improved to enable higher perature operation - Manufacturing and test cycle time is very long As a direct result of this program most of the manufacturing challenges have been met. The FPE film production metalization and winding yield has increased to over 82% from 70%, and the voltage breakdown strength of the wound capacitors has increased 270% to 189 V/μm. The high temperature packaging concepts are showing significant progress including promising results for lead attachments and hermetic packages at 200°C and non-hermetic packages at 250°C. Manufacturing and test cycle time will decrease as the market for FPE capacitors develops.

  8. Prototyping of Individual Ankle Orthosis Using Additive Manufacturing Technologies

    Directory of Open Access Journals (Sweden)

    Natalia Wierzbicka

    2017-09-01

    Full Text Available The paper presents design and manufacturing process of an individualized ankle orthosis using additive manufacturing technologies and reverse engineering. Conventional processes of manufacturing of orthosesareexpensive and time consuming -an alternative method was proposed. The patient’s leg was 3D scanned and the orthosis was designed using a CAD system. It was then manufactured using the Fused Deposition Modelling technology, assembled and fully tested. Positive results were obtained.

  9. Carbon fiber manufacturing via plasma technology

    Science.gov (United States)

    Paulauskas, Felix L.; Yarborough, Kenneth D.; Meek, Thomas T.

    2002-01-01

    The disclosed invention introduces a novel method of manufacturing carbon and/or graphite fibers that avoids the high costs associated with conventional carbonization processes. The method of the present invention avoids these costs by utilizing plasma technology in connection with electromagnetic radiation to produce carbon and/or graphite fibers from fully or partially stabilized carbon fiber precursors. In general, the stabilized or partially stabilized carbon fiber precursors are placed under slight tension, in an oxygen-free atmosphere, and carbonized using a plasma and electromagnetic radiation having a power input which is increased as the fibers become more carbonized and progress towards a final carbon or graphite product. In an additional step, the final carbon or graphite product may be surface treated with an oxygen-plasma treatment to enhance adhesion to matrix materials.

  10. Make disruptive technological change happen - The case of additive manufacturing

    DEFF Research Database (Denmark)

    Maresch, Daniela; Gartner, Johannes

    2018-01-01

    Disruptive technological change can contribute to a more abundant world. However, potentially disruptive technologies often struggle to significantly influence practice. One prominent example is additive manufacturing (AM). Although AM is often regarded as the next great technological revolution...

  11. Technology Innovation and Future Research Needs in Net Shape Manufacturing

    International Nuclear Information System (INIS)

    Yang, Dong-Yol

    2005-01-01

    The rapid change in customer needs and industrial environment has demanded innovations in the manufacturing sector. Metal forming industries have been confronted with new challenges of innovations in products, processes, machines, materials and production systems. From the viewpoints of competitiveness of products, new paradigms are required for innovation in manufacturing, especially in net shape manufacturing. Product innovations are increasingly put under emphasis beyond manufacturing innovations based on the holistic concurrent engineering approach. The presentation covers not only the innovation methodologies, but also the innovation directions in net shape manufacturing

  12. Design and manufacture of densitometer using in industrial radiography

    International Nuclear Information System (INIS)

    Nguyen Duc Huyen; Do Minh Duc; Vu Tien Ha; Dang Thanh Dung; Nguyen Do Kien

    2016-01-01

    Densitometer is a small device used to determine the darkness degree of radiography film. For improving the quality of the image on the film densitometer is indispensable equipment in sector related to the image, especially in the field of industrial imaging, radiographic. In Vietnam there are hundreds of densitometer devices, distributed to over 60 companies performing work on NDT sector and other companies. However, due to lack of maintenance, calibration and repair, many devices have been damaged, or unstable operation without any technical supports from the manufacturers. Up to now, Vietnam does not have any manufacturer (domestic and/or foreign) to research and development of the Densitometer. For these reasons, the scientists of Centre for Non-destructive Evaluation (NDE) with support from Vietnam Atomic Energy Institute (VINATOM) have successfully researched and manufactured the Densitometer using in industrial radiography in 2015.The equipment has been tested in practice and showed stable performance, measurement accuracy: ± 1% 0.02D; darkness range of film: 0.00 to 4.00D; repeated measurement values : ± 0.02D. The device meets ASTM 1079-00 standard for densitometer in industry. Especially, thanks to successful domestic manufacturing, the price of the device is only 60 % compared to the same imported products. (author)

  13. Multimedia Image Technology and Computer Aided Manufacturing Engineering Analysis

    Science.gov (United States)

    Nan, Song

    2018-03-01

    Since the reform and opening up, with the continuous development of science and technology in China, more and more advanced science and technology have emerged under the trend of diversification. Multimedia imaging technology, for example, has a significant and positive impact on computer aided manufacturing engineering in China. From the perspective of scientific and technological advancement and development, the multimedia image technology has a very positive influence on the application and development of computer-aided manufacturing engineering, whether in function or function play. Therefore, this paper mainly starts from the concept of multimedia image technology to analyze the application of multimedia image technology in computer aided manufacturing engineering.

  14. Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 11: Computer-Aided Manufacturing & Advanced CNC, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

    Science.gov (United States)

    Texas State Technical Coll., Waco.

    This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

  15. Manufacturing Technology of Ceramic Pebbles for Breeding Blanket

    Directory of Open Access Journals (Sweden)

    Rosa Lo Frano

    2018-05-01

    Full Text Available An open issue for the fusion power reactor is the choice of breeding blanket material. The possible use of Helium-Cooled Pebble Breeder ceramic material in the form of pebble beds is of great interest worldwide as demonstrated by the numerous studies and research on this subject. Lithium orthosilicate (Li4SiO4 is a promising breeding material investigated in this present study because the neutron capture of Li-6 allows the production of tritium, 6Li (n, t 4He. Furthermore, lithium orthosilicate has the advantages of low activation characteristics, low thermal expansion coefficient, high thermal conductivity, high density and stability. Even if they are far from the industrial standard, a variety of industrial processes have been proposed for making orthosilicate pebbles with diameters of 0.1–1 mm. However, some manufacturing problems have been observed, such as in the chemical stability (agglomeration phenomena. The aim of this study is to provide a new methodology for the production of pebbles based on the drip casting method, which was jointly developed by the DICI-University of Pisa and Industrie Bitossi. Using this new (and alternative manufacturing technology, in the field of fusion reactors, appropriately sized ceramic pebbles could be produced for use as tritium breeders.

  16. Innovation performance and competitive strategies in the Turkish manufacturing industry

    OpenAIRE

    Ulusoy, Gündüz; Ulusoy, Gunduz; Yeğenoğlu, Hande; Yegenoglu, Hande

    2007-01-01

    In this paper, we report on empirical investigation within the context of the Innovations in Manufacturing Industries in Turkey Study 2004/2005. The data was gathered in nine different cities in Turkey during the period August 2004 – January 2005. The survey was conducted through face-to-face interviews due to the complex nature of the survey and was implemented in 135 manufacturing firms operating in four sectors: Textiles, chemicals, food, and metal. The study has been an extension of the E...

  17. Industrial Maturity of FR Fuel Cycle Processes and Technologies

    International Nuclear Information System (INIS)

    Bruezière, Jérôme

    2013-01-01

    FR fuel cycle processes and technologies have already been proven industrially for Oxide Fuel, and to a lesser extent for metal fuel. In addition, both used oxide fuel reprocessing and fresh oxide fuel manufacturing benefit from similar industrial experience currently deployed for LWR. Alternative fuel type will have to generate very significant benefit in reactor ( safety, cost, … ) to justify corresponding development and industrialization costs

  18. Industrial applications of radiation technology

    International Nuclear Information System (INIS)

    Sabharwal, Sunil

    2005-01-01

    In recent years, radiation processing has emerged as an alternative to conventional technologies such as thermal and chemical processing for many industrial applications. The industry is expanding at a fast rate all over the world. The actual industrial benefits on commercial basis, however, depends on the need of the individual society and may vary from country to country. In India, the applications of radiation technology have been found in areas of health care, agriculture, food preservation, industry and environment. Both gamma radiation and electron beam accelerators are being utilized for this purpose. Presently, 6 commercial gamma irradiators housing about 1.5 million curie 60 Co and an annual turnover of over US$ 2 million and 3 commercial electron beam (EB) accelerators with installed capacity of 185 kW are commercially operating in India. The new areas being explored include use of electron beam irradiation for surface treatment, radiation processed membranes for a variety of applications and radiation processing of natural polymers. In the present paper, the current status of this program, especially the recent developments and future direction of radiation processing technology is reviewed. (author)

  19. Technology and the uranium industry

    International Nuclear Information System (INIS)

    Pool, T.C.

    2000-01-01

    Continuing economic and regulatory pressures on the uranium industry can be countered only through advances in technology. Low prices, the 'ALARA' principle, and concerns about 'sustainability' require the industry to continually improve upon its already impressive record of performance. Technological improvement in the uranium industry is necessary in order to: 1) Maintain our resource base through the discovery of ever deeper deposits; 2) Improve the efficiency with which we may exploit - a) very high-grade deposits by remote underground mining methods - b) very low-grade deposits with environmentally-benign, in situ, leaching methods - and c) moderate-grade, near-surface deposits by open-pit mining methods; 3) Meet increasingly stringent and, in many cases, arbitrary and unrealistic environmental and safety requirements; and 4) Cope with increasing competition from an expanding number of sources of secondary supply. Manifestations of the uranium industry's ability to improve its performance through technology can be seen in many ways including: a continuing reduction in production costs; large gains in productivity; and a truly superior record of employee safety. Maintenance of these trends requires both innovation and the open sharing of information. (author)

  20. Technology and the uranium industry

    International Nuclear Information System (INIS)

    Pool, T.C.

    2002-01-01

    Continuing economic and regulatory pressures on the uranium industry can be countered only through advances in technology. Low prices, the 'ALARA' principle, and concerns about 'sustainability' require the industry to continually improve upon its already impressive record of performance. Technological improvement in the uranium industry is necessary in order to: (a) Maintain our resource base through the discovery of ever deeper deposits; (b) Improve the efficiency with which we may exploit (i) very high-grade deposits by remote underground mining methods (ii) very low-grade deposits with environmentally-benign, in situ leaching methods - and (iii) moderate-grade, near-surface deposits by open-pit mining methods (c) Meet increasingly stringent and, in many cases, arbitrary and unrealistic environmental and safety requirements; and (d) Cope with increasing competition from an expanding number of sources of secondary supply. Manifestations of the uranium industry's ability to improve its performance through technology can be seen in many ways including: a continuing reduction in production costs; large gains in productivity; and a truly superior record of employee safety. Maintenance of these trends requires both innovation and the open sharing of information. (author)

  1. Development of an ergonomics guideline for the furniture manufacturing industry.

    Science.gov (United States)

    Mirka, Gary A

    2005-03-01

    Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

  2. Technology clubs, R&D and growth patterns : Evidence from EU manufacturing

    NARCIS (Netherlands)

    Bos, J. W. B.; Economidou, C.; Koetter, M.

    This paper investigates the forces driving output change in a panel of EU manufacturing industries. A flexible modeling strategy is adopted that accounts for: (i) inefficient use of resources and (ii) differences in the production technology across industries. With Our model we are able to identify

  3. 5th International and 26th All India Manufacturing Technology, Design and Research Conference

    CERN Document Server

    Dixit, Uday

    2015-01-01

    This book presents selected research papers of the AIMTDR 2014 conference on application of laser technology for various manufacturing processes such as cutting, forming, welding, sintering, cladding and micro-machining. State-of-the-art of these technologies in terms of numerical modeling, experimental studies and industrial case studies are presented. This book will enrich the knowledge of budding technocrats, graduate students of mechanical and manufacturing engineering, and researchers working in this area.  

  4. Micro-manufacturing technologies and their applications a theoretical and practical guide

    CERN Document Server

    Shipley, David

    2017-01-01

    This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for mic...

  5. Rare resource supply crisis and solution technology for semiconductor manufacturing

    Science.gov (United States)

    Fukuda, Hitomi; Hu, Sophia; Yoo, Youngsun; Takahisa, Kenji; Enami, Tatsuo

    2016-03-01

    There are growing concerns over future environmental impact and earth resource shortage throughout the world and in many industries. Our semiconductor industry is not excluded. "Green" has become an important topic as production volume become larger and more powerful. Especially, the rare gases are widely used in semiconductor manufacturing because of its inertness and extreme chemical stability. One major component of an Excimer laser system is Neon. It is used as a buffer gas for Argon (Ar) and Krypton (Kr) gases used in deep ultraviolet (DUV) lithography laser systems. Since Neon gas accounting for more than 96% of the laser gas mixture, a fairly large amount of neon gas is consumed to run these DUV lasers. However, due to country's instability both in politics and economics in Ukraine, the main producer of neon gas today, supply reduction has become an issue and is causing increasing concern. This concern is not only based on price increases, but has escalated to the point of supply shortages in 2015. This poses a critical situation for the semiconductor industry, which represents the leading consumer of neon gas in the world. Helium is another noble gas used for Excimer laser operation. It is used as a purge gas for optical component modules to prevent from being damaged by active gases and impurities. Helium has been used in various industries, including for medical equipment, linear motor cars, and semiconductors, and is indispensable for modern life. But consumption of helium in manufacturing has been increased dramatically, and its unstable supply and price rise has been a serious issue today. In this article, recent global supply issue of rare resources, especially Neon gas and Helium gas, and its solution technology to support semiconductor industry will be discussed.

  6. INDICATORS FOR SUSTAINABILITY IN INDUSTRIAL SYSTEMS CASE STUDY: PAPER MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Maria Emiliana Fortună

    2011-12-01

    Full Text Available The paper describes a framework for promoting sustainability by using indicators for sustainable production. The concept of sustainable production is described as it is viewed by various organisms actions involved in the analysis of the sustainable industrial systems.The measure of sustainability is approached considering indicators of sustainable production, addressing both their dimensions and qualitative and quantitative features.The proposed framework refines the sustainability dimension for a case study which envisages sustainability in paper manufacturing. The analysis takes into account the life cycle analysis for the considered process since the environmental impact is seen as an essential sustainability indicator. Paper recycling and reuse is associated environmental and social costs, as a preferred alternative in waste minimization hierarchy in the manufacturing of non-trees eco-friendly paper.Proactive initiatives to improve the environmental performances of production process are considered as powerful tools for improving the paper manufacturing environmental footprint.

  7. Automation Architecture based on Cyber Physical Systems for Flexible Manufacturing within Oil&Gas Industry

    Directory of Open Access Journals (Sweden)

    Marcelo V García

    2018-03-01

    Full Text Available It is clear that in the next few years most of the technologies involved in the so-called Industry 4.0 will have a deep impact on manufacturing companies, including those related to Oil & Gas exploration and production. Low cost automation promotes reference architectures and development approaches aiming at increasing the flexibility and efficiency of production operations in industrial plants. In this sense, OPC UA, in addition to allowing companies to join the Industry 4.0 initiative, provides local and remote access to plant information, enabling a recognized mechanism for both, horizontal and vertical integration in a reliable, safe and efficient way. The contribution of this article is an open architecture for vertical integration based on cyber-physical production systems, configured under IEC 61499 and using OPC UA, suitable to achieve flexible manufacturing within Oil & Gas industry.

  8. A mathematical model for environmental risk assessment in manufacturing industry

    Institute of Scientific and Technical Information of China (English)

    何莉萍; 徐盛明; 陈大川; 党创寅

    2002-01-01

    Environmental conscious manufacturing has become an important issue in industry because of market pressure and environmental regulations. An environmental risk assessment model was developed based on the network analytic method and fuzzy set theory. The "interval analysis method" was applied to deal with the on-site monitoring data as basic information for assessment. In addition, the fuzzy set theory was employed to allow uncertain, interactive and dynamic information to be effectively incorporated into the environmental risk assessment. This model is a simple, practical and effective tool for evaluating the environmental risk of manufacturing industry and for analyzing the relative impacts of emission wastes, which are hazardous to both human and ecosystem health. Furthermore, the model is considered useful for design engineers and decision-maker to design and select processes when the costs, environmental impacts and performances of a product are taken into consideration.

  9. Importance of wood from planted forests for manufacturing industry

    Directory of Open Access Journals (Sweden)

    Victor Almeida De Araujo

    2017-06-01

    Full Text Available The manufactured wood products are essential to modern society, since they are made from renewable and recyclable raw material, characterizing a sustainable input. The objective of this study was to elucidate the importance of wood from planted forests in forest products manufacture of higher added value, addressing forest and wood contexts of topics related to education, resources, products, industry, government incentives, public policies and markets. Different from Europe, it was verified that Brazil does not support positively this important industrial sector, nevertheless it still presents growth potential due to range of wooden-based products. Thus, wood could reach a prominent position in Brazilian economy, if strategies and incentives were defined by rules and public policies..

  10. Measures of International Manufacturing and Trade of Clean Energy Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Engel-Cox, Jill; Sandor, Debbie; Keyser, David; Mann, Margaret

    2017-05-25

    The technologies that produce clean energy, such as solar photovoltaic panels and lithium ion batteries for electric vehicles, are globally manufactured and traded. As demand and deployment of these technologies grows exponentially, the innovation to reach significant economies of scale and drive down energy production costs becomes less in the technology and more in the manufacturing of the technology. Manufacturing innovations and other manufacturing decisions can reduce costs of labor, materials, equipment, operating costs, and transportation, across all the links in the supply chain. To better understand the manufacturing aspect of the clean energy economy, we have developed key metrics for systematically measuring and benchmarking international manufacturing of clean energy technologies. The metrics are: trade, market size, manufacturing value-added, and manufacturing capacity and production. These metrics were applied to twelve global economies and four representative technologies: wind turbine components, crystalline silicon solar photovoltaic modules, vehicle lithium ion battery cells, and light emitting diode packages for efficient lighting and other consumer products. The results indicated that clean energy technologies are being developed via complex, dynamic, and global supply chains, with individual economies benefiting from different technologies and links in the supply chain, through both domestic manufacturing and global trade.

  11. Innovation and technical efficiency in Malaysian family manufacturing industries

    OpenAIRE

    Susila Munisamy; Edward Wong Sek Khin; Chia Zi Fon

    2015-01-01

    This study investigates the technical efficiency for each industry in the Malaysian manufacturing sector is estimated by using Data Envelopment Analysis (DEA). In order to pursue a balance of innovation between long-term and short-term performance strategy, we integrate the Balance Scorecard (BSC) approach with DEA. Furthermore, this paper looks at the determinants of efficiency using the Tobit regression model. In measuring the level of firms’ efficiency and innovation, the wood and wood b...

  12. Productivity and Openness: Firm Level Evidence in Brazilian Manufacturing Industries

    OpenAIRE

    Wenjun Liu; Shoji Nishijima

    2012-01-01

    This study investigates the productivity of Brazilian manufacturing industries, particularly addressing the influence of liberalization on productivity. We first calculate total factor productivity (TFP) by estimating the stochastic frontier production function and the inefficiency determination equation simultaneously. Then TFP growth rates are regressed on openness-related variables and other firm characteristics. The results show that firm openness to the world is a crucial determinant of ...

  13. A Preliminary Review on Economies of Scale (EOS Towards Industrialized Building System (IBS Manufacturer

    Directory of Open Access Journals (Sweden)

    Tajul Ariffin Syazwana

    2017-01-01

    Full Text Available Industrialized Building System (IBS is a potential technology to improve productivity of construction industry. Controlled production and minimum generation of construction waste are some of the benefits that can be achieved by replacing conventional construction with IBS. In business, IBS is giving a huge opportunity for manufacturer and supplier to expand their business while contributing to construction development. However, bad strategies will put the company in high risk due to higher initial capital for machines and equipment. Therefore, strategic planning for company’s growth, profit maximization, and enhancement of productivity is undeniable to ensure the success of business in construction industry. This preliminary paper is exploring associated factors that affect Economy of Scale (EOS and their relationships in catalyzing the IBS manufacturer especially precast concrete as the scope of study to continue their business in the construction industry. Thus, a framework of EOS is proposed to assist IBS manufacturers to ensure their company’s growth and stability, competitiveness in term of monopoly or an oligopoly, increasing productivity, leading constant returns to scale, and finally increasing the firm’s efficiency. The refined EOS’s conceptual framework is an important turning point to support the development of decision making tools for IBS manufacturer towards their stability and survival in this highly competitive industry.

  14. The Office of Industrial Technologies - enhancing the competitiveness, efficiency, and environmental quality of American industry through technology partnerships

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    A critical component of the Federal Government`s effort to stimulate improved industrial energy efficiency is the DOE`s Office of Industrial Technologies (OIT). OIT funds research, development, and demonstration (RD&D) efforts and transfers the resulting technology and knowledge to industry. This document describes OIT`s program, including the new Industries of the Future (IOF) initiative and the strategic activities that are part of the IOF process. It also describes the energy, economic, and environmental characteristics of the materials and process industries that consume nearly 80% of all energy used by manufacturing in the United States. OIT-supported RD&D activities relating to these industries are described, and quantitative estimates of the potential benefits of many OIT-supported technologies for industry are also provided.

  15. Supply Chain and Blade Manufacturing Considerations in the Global Wind Industry

    Energy Technology Data Exchange (ETDEWEB)

    James, Ted [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goodrich, Alan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-12-12

    Over the past decade, significant wind manufacturing capacity has been built in the United States in response to an increasingly large domestic market. Recent U.S. manufacturing production levels exceed anticipated near-term domestic demand for select parts of the supply chain, in part due to policy uncertainty, and this is resulting in some restructuring in the industry. Factor location decisions are influenced by a combination of quantitative and qualitative factors; proximity to end-markets is often a key consideration, especially for manufacturers of large wind turbine components. Technology advancements in the wind sector are continuing, and larger blade designs are being pursued in the market, which may increase U.S.-based manufacturing opportunities.

  16. A continuing program for technology transfer to the apparel industry

    Science.gov (United States)

    Clingman, W. H.

    1971-01-01

    A six month program has been carried out to investigate various mechanisms for transferring technology to industry. This program has focused on transfer to the apparel industry through the Apparel Research Foundation. The procedure was to analyze the problem, obtain potentially relevant aerospace technology, and then transfer this technology to the industry organization. This was done in a specific case. Technology was identified relevant to stitchless joining, and this technology was transferred to the Apparel Research Foundation. The feasibility and ground rules for carrying out such activities on a broader scale were established. A specific objective was to transfer new technology from the industry organization to the industry itself. This required the establishment of an application engineering program. Another transfer mechanism tested was publication of solutions to industry problems in a format familiar to the industry. This is to be distinguished from circulating descriptions of new technology. Focus is on the industry problem and the manager is given a formula for solving it that he can follow. It was concluded that this mechanism can complement the problem statement approach to technology transfer. It is useful in achieving transfer when a large amount of application engineering is not necessary. A wide audience is immediately exposed to the technology. On the other hand, the major manufacturing problems which require a sophisticated technical solution integrating many innovations are less likely to be helped.

  17. Critical success factors model developing for sustainable Kaizen implementation in manufactur-ing industry in Ethiopia

    OpenAIRE

    Haftu Hailu; Abdelkadir Kedir; Getachew Bassa; Kassu Jilcha

    2017-01-01

    The purpose of the research is to identify critical success factors and model developing for sustaining kaizen implementation. Peacock shoe is one of the manufacturing industries in Ethiopia facing challenges on sustaining. The methodology followed is factor analysis and empirically testing hypothesis. A database was designed using SPSS version 20. The survey was validated using statistical validation using the Cronbach alpha index; the result is 0.908. The KMO index value was obtained for th...

  18. Technological Impacts: Manufacturing and the Economy

    Science.gov (United States)

    Childress, Vincent W.

    2012-01-01

    For the past two decades, and recently with the economic recession, the media has emphasized the decline of manufacturing in the United States and other developed countries. In the U.S., some initially blamed the North American Free Trade Agreement (NAFTA) for this decline. Hearing that manufacturing is on the decline, one might reason that its…

  19. Technologies to support industrial processes

    International Nuclear Information System (INIS)

    Palazzi, G.; Savelli, D.

    1989-05-01

    Control and measuring techniques applied to industry have the common aim of increasing safety, reliability and plant availability. The industrial monitoring system needs a lot of sensors, whose signals, elaborated and interpreted, allow one to define the best working condition; moreover control instruments perform a diagnosis related to damages and breakages. The Experimental Engineering Division of ENEA's Thermal Reactor Department has developed sensors and measuring apparatus and has acquired advanced control techniques. All these systems, containing an original software, have been applied to industrial process problems and/or to experimental facilities both to increase reliability and to understand better process physics. Division activities are grouped in four sectors: non-destructive examinations (ultrasonic, eddy current, thermography, holographic interpherometry, penetrant liquids and magnetoscopy); innovative sensors (heated thermocouples, optical fiber sensors); advanced measuring systems (laser technology for fluidodynamic measures, nuclear radiation techniques, infrared measuring, mass spectrometer, hot-film anemometer, chromatographic apparatus); advanced technologies for diagnosis and signal analysis (digital image processing, statistical analysis). (author)

  20. Readiness Assessment Towards Smart Manufacturing System for Tuna Processing Industry in Indonesia

    Science.gov (United States)

    Anggrahini, D.; Kurniati, N.; Karningsih, P. D.; Parenreng, S. M.; Syahroni, N.

    2018-04-01

    Marine product processing is one of the top priority clusters in the national development. Tuna, as a kind of deep ocean fishes, has the highest number of production that significantly increased throughout the years. Indonesia government encourages tuna processing industry, which are mostly dominated by small to medium enterprises, to grow continuously. Nowadays, manufacturers are facing substantial challenges in adopting modern system and technology that will lead a significant improvement through the internet of things (IoT). A smart factory transform integrated manufacturing process, in a high speed processing to respond customer needs. It has some positive impacts, such as increasing productivity, reducing set up time, shortening marketing and other support activities, hence the process is being more flexible and efficient. To implement smart manufacturing system, factories should know the readiness at any level of them, technology capability and strategy appropriateness. This exploratory study aims to identify the criterias, and develop an assessment tools to measure the level towards smart factory.

  1. Land transportation model for supply chain manufacturing industries

    Science.gov (United States)

    Kurniawan, Fajar

    2017-12-01

    Supply chain is a system that integrates production, inventory, distribution and information processes for increasing productivity and minimize costs. Transportation is an important part of the supply chain system, especially for supporting the material distribution process, work in process products and final products. In fact, Jakarta as the distribution center of manufacturing industries for the industrial area. Transportation system has a large influences on the implementation of supply chain process efficiency. The main problem faced in Jakarta is traffic jam that will affect on the time of distribution. Based on the system dynamic model, there are several scenarios that can provide solutions to minimize timing of distribution that will effect on the cost such as the construction of ports approaching industrial areas other than Tanjung Priok, widening road facilities, development of railways system, and the development of distribution center.

  2. 507 Developing Industrial and Technological Manpower via ...

    African Journals Online (AJOL)

    sustainable industrial and technological advancement and security for national development. ... industrial/technological manpower for Nigeria is the technical vocational education and ..... Business and Social Sciences, 2 (2), 71-77. Retrieved ...

  3. Strategic project selection based on evidential reasoning approach for high-end equipment manufacturing industry

    Directory of Open Access Journals (Sweden)

    Lu Guangyan

    2017-01-01

    Full Text Available With the rapid development of science and technology, emerging information technologies have significantly changed the daily life of people. In such context, strategic project selection for high-end equipment manufacturing industries faces more and more complexities and uncertainties with the consideration of several complex criteria. For example, a group of experts rather than a single expert should be invited to select strategic project for high-end equipment manufacturing industries and the experts may feel difficulty to express their preferences towards different strategic projects due to their limited cognitive capabilities. In order to handle these complexities and uncertainties, the criteria framework of strategic project selection is firstly constructed based on the characteristics of high-end equipment manufacturing industries and then evidential reasoning (ER approach is introduced in this paper to help experts express their uncertain preferences and aggregate these preferences to generate an appropriate strategic project. A real case of strategic project selection in a high-speed train manufacturing enterprise is investigated to demonstrate the validity of the ER approach in solving strategic project selection problem.

  4. Industrial applications of radiation technology

    International Nuclear Information System (INIS)

    Sarma, K.S.S.

    2012-01-01

    During the past one decade, Radiation Technology applications utilizing gamma radiation and high energy electrons have made a big way into the Indian industry bringing quality and value-added products in a more environment-friendly way. While radiation sterilization of health care products, hygienization of food materials, modification of polymer materials etc. are established as successful processes world wide including India, new applications are emerging especially in the field of environmental remediation. Two types of installations viz. gamma irradiators and high energy electron accelerators are in use right now to carry out such applications. The aim of the talk is to put forward before the audience about the potential applications developed in India and abroad, role of Department of Atomic Energy and current status of radiation processing for industrial utilization

  5. The Persistence of Abnormal Returns: Analysis of Polish Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Marcin Puziak

    2017-06-01

    Full Text Available The ultimate goal of a company is to build the enterprise value, which is achievable thanks to abnormal profits generated in particular period. Moreover, firms are expected to take measures to maintain abnormal profit in the future. On the other hand, abnormal profits attract competitors, who increase competition and as a result abnormal profits disappear. The persistence of profit is a term that describes a situation, when the company is successful in maintaining the abnormal profit over time. The main aim of this paper is to investigate the persistence of abnormal profit in Polish manufacturing sector. In other words, the question is whether Polish manufacturing companies are able to maintain their abnormal profits over time. The persistence of abnormal profits is investigated using dynamic panel model with generalized method-of-moments estimators. The method is applied to a panel of 5303 Polish companies from manufacturing sector observed over the period 2006-2014. This paper contributes to the existing literature in two ways. First, analysis is performed for developing country. Second, analysis is performed both at the level of entire sector and at division level. Three main conclusions can be drawn from the conducted research: there are significant differences between profit rates within the same industry at division level; estimated persistence of abnormal profit coefficients are at moderate level; there are substantial differences between estimated persistence of profit coefficients for divisions in the same industry.

  6. Instructional Materials in Manufacturing for Junior High School Industrial Arts. Final Report and Parts I-IV.

    Science.gov (United States)

    Ohio State Univ., Columbus.

    This Title XI Institute was designed and conducted to introduce the participants to inquiry and invention taking place in industrial arts curriculum across the United States. The institute participated in the inquiry stage through advanced study of manufacturing technology and industrial arts curriculum, and in the invention stage through the…

  7. Understanding evolutionary processes in non-manufacturing industries: Empirical insights from the shakeout in pharmaceutical wholesaling

    OpenAIRE

    Adam J. Fein

    1998-01-01

    Although the empirical pattern of industry shakeout has been documented for many manufacturing industries, we know little about the processes by which market structure evolves in non-manufacturing service industries. This paper establishes detailed empirical observations about the consolidation of a single non-manufacturing industry, the wholesale distribution of pharmaceuticals. These observations are used to explore differences between manufacturing and wholesaling in both the patterns and ...

  8. Comparative local advantages and technological competitiveness for Italian industry

    International Nuclear Information System (INIS)

    Palma, Daniela; Zini, Alessandro

    2005-01-01

    This article describes the evolution of the Italian manufacturing sector's competitiveness over the past ten years and the role played bu the local technology-based comparative advantages in shaping national competitiveness. Data obtained with local-based econometric techniques point to a gradual weakening of core know-how in high-tech industries strongly rooted in the Northwest [it

  9. Automated Manufacturing/Robotics Technology: Certificate and Associate Degree Programs.

    Science.gov (United States)

    McQuay, Paul L.

    A description is provided of the Automated Manufacturing/Robotics program to be offered at Delaware County Community College beginning in September 1984. Section I provides information on the use of reprogramable industrial robots in manufacturing and the rapid changes in production that can be effected through the application of automated…

  10. Adapting technology from other industries

    International Nuclear Information System (INIS)

    Bryan, G.H.

    1989-01-01

    In the light of tougher requirements on water chemistry and liquid discharged to the environment, and with an awareness that more efficient filtration can reduce plant radiation levels, vendors are starting to adapt proven filtration technology from other industries for use in nuclear plants. Two materials have been found that work quite well in nuclear service. The first, a glass-fibre paper pleated together with a supported membrane, offers excellent dirt holding capacity and very predictable efficiency levels. The second, a meltblown, calendered polypropylene, has an asymmetric pore structure that allows it to act to some degree as a depth filter and has the same efficiency as a supported membrane. (author)

  11. Technological innovation capability in Malaysian-owned resource-based manufacturing companies: Early findings

    Science.gov (United States)

    Razali, Nur Fhathyhah; Mohd Suradi, Nur Riza; Ahmad Shahabuddin, Faridatul Azna; Ismail, Wan Rosmanira; Abidin, Norkisme Zainal; Ahmad, Nor Amalina; Mustafa, Zainol

    2013-04-01

    This study aims to identify the determinants of technological innovation capability of Malaysian-owned companies in the resources-based manufacturing, to identify the relationship between technological innovation capability (TIC) and technological innovation performance (TIP) for the resource-based manufacturing. Furthermore, this study also aims to identify innovation capability factors that need more emphasis and improvements from the respective authority. The scope of the study covers four industries which are petrochemical industries, pharmaceutical industries, palm oil-based industries and food processing industries which are located in the state of Selangor. Descriptive analysis, correlation analysis and performance capability analysis were used in this study. It was found that, technological innovation capabilities (TIC) for companies in the resource-based manufacturing are moderate. Factors such as policies capability, human resources capability and facilities capability have a positive relationship with the performance of technological innovation (TIP). These findings will help the government in making decisions and better implementation of policies to strengthen the competitiveness of the company, particularly in resource-based manufacturing.

  12. The strategic relevance of manufacturing technology: An overall quality concept to promote innovation preventing drug shortage.

    Science.gov (United States)

    Panzitta, Michele; Ponti, Mauro; Bruno, Giorgio; Cois, Giancarlo; D'Arpino, Alessandro; Minghetti, Paola; Mendicino, Francesca Romana; Perioli, Luana; Ricci, Maurizio

    2017-01-10

    Manufacturing is the bridge between research and patient: without product, there is no clinical outcome. Shortage has a variety of causes, in this paper we analyse only causes related to manufacturing technology and we use shortage as a paradigm highliting the relevance of Pharmaceutical Technology. Product and process complexity and capacity issues are the main challenge for the Pharmaceutical Industry Supply chain. Manufacturing Technology should be acknowledged as a R&D step and as a very important matter during University degree in Pharmacy and related disciplines, promoting collaboration between Academia and Industry, measured during HTA step and rewarded in terms of price and reimbursement. The above elements are not yet properly recognised, and manufacturing technology is taken in to consideration only when a shortage is in place. In a previous work, Panzitta et al. proposed to perform a full technology assessment at the Health Technological Assessment stage, evaluating three main technical aspects of a medicine: manufacturing process, physicochemical properties, and formulation characteristics. In this paper, we develop the concept of manufacturing appraisal, providing a technical overview of upcoming challenges, a risk based approach and an economic picture of shortage costs. We develop also an overall quality concept, not limited to GMP factors but broaden to all elements leading to a robust supply and promoting technical innovation. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. New technologies on eggs manufacturing; Innovazione tecnologica nell`industria di lavorazione delle uova

    Energy Technology Data Exchange (ETDEWEB)

    Pizzichini, M.; Serse, A. [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dip. Innovazione; Marcolini, P.; Erbisti, P. [Soc. Coop. Avicola Lessinia, Pigozzo, Verona (Italy)

    1996-10-01

    Objective of this paper is innovate the industrial manufacturing process, up grading the white egg commercial value according the following points: - improve the albumen rheological properties (whippability); - concentrate the white eggs without damaging the protein functional properties; - fractionate eggs white proteins to improve the useful application range in the pharmaceutical industry. The albumen chemical-physical properties and the protein separation technologies, based mainly on membrane techniques, are discussed. This paper represents a first technical overview on eggs manufacturing, carried out by ENEA (Italian Agency for New Technologies, Energy and the Environment) and the Avicola Lessinia, with the objective to develop a new production process.

  14. Risk calculations in the manufacturing technology selection process

    DEFF Research Database (Denmark)

    Farooq, S.; O'Brien, C.

    2010-01-01

    Purpose - The purpose of this paper is to present result obtained from a developed technology selection framework and provide a detailed insight into the risk calculations and their implications in manufacturing technology selection process. Design/methodology/approach - The results illustrated...... in the paper are the outcome of an action research study that was conducted in an aerospace company. Findings - The paper highlights the role of risk calculations in manufacturing technology selection process by elaborating the contribution of risk associated with manufacturing technology alternatives...... in the shape of opportunities and threats in different decision-making environments. Practical implications - The research quantifies the risk associated with different available manufacturing technology alternatives. This quantification of risk crystallises the process of technology selection decision making...

  15. Trends in innovation activities in manufacturing industries across development echelons

    Directory of Open Access Journals (Sweden)

    Abdullah M. Khan

    2017-07-01

    Full Text Available This empirical paper explores trends in innovation activities measured by a countries’ total patent application submission intensity relative to its population, and by analyzing U.S. granted patents data for cohorts of developed countries and developing countries. In addition to tabular and graphical analyses, I use a baseline regression model and a variant model thereof to assess the relative influence of a set of aggregate variables on innovation activities in eight manufacturing industries across two cohorts of countries (developed and developing where each cohort contains eight individual countries. Eight industries included in this study are: Chemical, Petroleum, electrical and electronics equipment, machinery, pharmaceutical, plastic, computer, and textile. The cohort of developed countries includes Australia, Canada, Czech Republic, France, Italy, Poland, Switzerland, and the United States. The cohort of developing countries includes Brazil, China, India, Malaysia, Mexico, Russia, South Africa, and Turkey. Per regression results, ethnic diversity is a statistically significant positive determinant of innovation for all industry aggregate patent count for both high income and developing countries. Also, per capita electricity usage, R&D expenditure as percent of GDP, and percent of population with internet access are three positive factors of innovation irrespective of industrial subsectors and position of a country in the development echelon. Interestingly, impact of ICT-services export is statistically significant and innovation boosting in developing countries in the cohort relative to countries in the cohort of developed countries. It also appears that trade openness served as a stronger stimulant of innovation activities for developing countries’ but not as much for the cohort of developed or high-income countries. This paper attempts to extend the literature on cross-country comparison of innovation activities by using two

  16. Development and validation of resource flexibility measures for manufacturing industry

    Directory of Open Access Journals (Sweden)

    Gulshan Chauhan

    2014-01-01

    Full Text Available Purpose: Global competition and ever changing customers demand have made manufacturing organizations to rapidly adjust to complexities, uncertainties, and changes. Therefore, flexibility in manufacturing resources is necessary to respond cost effectively and rapidly to changing production needs and requirements.  Ability of manufacturing resources to dynamically reallocate from one stage of a production process to another in response to shifting bottlenecks is recognized as resource flexibility. This paper aims to develop and validate resource flexibility measures for manufacturing industry that could be used by managers/ practitioners in assessing and improving the status of resource flexibility for the optimum utilization of resources. Design/methodology/approach: The study involves survey carried out in Indian manufacturing industry using a questionnaire to assess the status of various aspects of resource flexibility and their relationships. A questionnaire was specially designed covering various parameters of resource flexibility. Its reliability was checked by finding the value of Cronback alpha (0.8417. Relative weightage of various measures was found out by using Analytical Hierarchy Process (AHP. Pearson’s coefficient of correlation analysis was carried out to find out relationships between various parameters. Findings: From detailed review of literature on resource flexibility, 17 measures of resource flexibility and 47 variables were identified. The questionnaire included questions on all these measures and parameters. ‘Ability of machines to perform diverse set of operations’ and ability of workers to work on different machines’ emerged to be important measures with contributing weightage of 20.19% and 17.58% respectively.  All the measures were found to be significantly correlated with overall resource flexibility except ‘training of workers’, as shown by Pearson’s coefficient of correlation. This indicates that

  17. Technology Reinvestment Project Manufacturing Education and Training. Volume 1

    Science.gov (United States)

    Schroer, Bernard J.; Bond, Arthur J.

    1997-01-01

    The manufacturing education program is a joint program between the University of Alabama in Huntsville's (UAH) College of Engineering and Alabama A&M University's (AAMLJ) School of Engineering and Technology. The objective of the program is to provide more hands-on experiences to undergraduate engineering and engineering technology students. The scope of work consisted of. Year 1, Task 1: Review courses at Alabama Industrial Development Training (AIDT); Task 2: Review courses at UAH and AAMU; Task 3: Develop new lab manuals; Task 4: Field test manuals; Task 5: Prepare annual report. Year 2, Task 1: Incorporate feedback into lab manuals; Task 2 : Introduce lab manuals into classes; Task 3: Field test manuals; Task 4: Prepare annual report. Year 3, Task 1: Incorporate feedback into lab manuals; Task 2: Introduce lab manuals into remaining classes; Task 3: Conduct evaluation with assistance of industry; Task 4: Prepare final report. This report only summarizes the activities of the University of Alabama in Huntsville. The activities of Alabama A&M University are contained in a separate report.

  18. Scalable manufacturing of biomimetic moldable hydrogels for industrial applications

    Science.gov (United States)

    Yu, Anthony C.; Chen, Haoxuan; Chan, Doreen; Agmon, Gillie; Stapleton, Lyndsay M.; Sevit, Alex M.; Tibbitt, Mark W.; Acosta, Jesse D.; Zhang, Tony; Franzia, Paul W.; Langer, Robert; Appel, Eric A.

    2016-12-01

    Hydrogels are a class of soft material that is exploited in many, often completely disparate, industrial applications, on account of their unique and tunable properties. Advances in soft material design are yielding next-generation moldable hydrogels that address engineering criteria in several industrial settings such as complex viscosity modifiers, hydraulic or injection fluids, and sprayable carriers. Industrial implementation of these viscoelastic materials requires extreme volumes of material, upwards of several hundred million gallons per year. Here, we demonstrate a paradigm for the scalable fabrication of self-assembled moldable hydrogels using rationally engineered, biomimetic polymer-nanoparticle interactions. Cellulose derivatives are linked together by selective adsorption to silica nanoparticles via dynamic and multivalent interactions. We show that the self-assembly process for gel formation is easily scaled in a linear fashion from 0.5 mL to over 15 L without alteration of the mechanical properties of the resultant materials. The facile and scalable preparation of these materials leveraging self-assembly of inexpensive, renewable, and environmentally benign starting materials, coupled with the tunability of their properties, make them amenable to a range of industrial applications. In particular, we demonstrate their utility as injectable materials for pipeline maintenance and product recovery in industrial food manufacturing as well as their use as sprayable carriers for robust application of fire retardants in preventing wildland fires.

  19. Carbon footprint as environmental performance indicator for the manufacturing industry

    DEFF Research Database (Denmark)

    Laurent, Alexis; Olsen, Stig Irving; Hauschild, Michael Zwicky

    2010-01-01

    With the current focus on our climate change impacts, the embodied CO2 emission or "Carbon footprint" is often used as an environmental performance indicator for our products or production activities. The ability of carbon footprint to represent other types of impact like human toxicity, and hence...... the overall environmental impact is investigated based on life cycle assessments of several materials of major relevance to manufacturing industries. The dependence of the carbon footprint on the assumed scenarios for generation of thermal and electrical energy in the life cycle of the materials is analyzed......, and the appropriateness of carbon footprint as an overall indicator of the environmental performance is discussed....

  20. IPAD: A unique approach to government/industry cooperation for technology development and transfer

    Science.gov (United States)

    Fulton, Robert E.; Salley, George C.

    1985-01-01

    A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

  1. Present Status and Future Growth of Advanced Maintenance Technology and Strategy in US Manufacturing.

    Science.gov (United States)

    Jin, Xiaoning; Weiss, Brian A; Siegel, David; Lee, Jay

    2016-01-01

    The goals of this paper are to 1) examine the current practices of diagnostics, prognostics, and maintenance employed by United States (U.S.) manufacturers to achieve productivity and quality targets and 2) to understand the present level of maintenance technologies and strategies that are being incorporated into these practices. A study is performed to contrast the impact of various industry-specific factors on the effectiveness and profitability of the implementation of prognostics and health management technologies, and maintenance strategies using both surveys and case studies on a sample of U.S. manufacturing firms ranging from small to mid-sized enterprises (SMEs) to large-sized manufacturing enterprises in various industries. The results obtained provide important insights on the different impacts of specific factors on the successful adoption of these technologies between SMEs and large manufacturing enterprises. The varying degrees of success with respect to current maintenance programs highlight the opportunity for larger manufacturers to improve maintenance practices and consider the use of advanced prognostics and health management (PHM) technology. This paper also provides the existing gaps, barriers, future trends, and roadmaps for manufacturing PHM technology and maintenance strategy.

  2. DESIGN AND MANUFACTURING OF MODULAR PARQUET FLOORING IN INDUSTRIAL SYSTEM

    Directory of Open Access Journals (Sweden)

    Ivan CISMARU

    2014-09-01

    Full Text Available The paper submits constructive options and methods to design and manufacture modular parquet flooring, as well as fastening methods in constructions. Likewise, it presents the branches of civil engineering where modular parquet flooring may be turned to profit – industrial buildings, company premises or residential premises. The turn towards the achievement of private constructions, such as individual houses, led to losing control of the modular system applied in defining the inner sizes of the constructions and implicitly to the apparition of dimensional incompatibilities between the parquet flooring and the built spaces. The paper sets out (to solve by an individualized design procedure to achieve modular parquet flooring in industrial system, in correspondence with the sizes of the inner spaces afferent to the constructions.

  3. Safety practices in Jordanian manufacturing enterprises within industrial estates.

    Science.gov (United States)

    Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

    2013-01-01

    This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

  4. Fostering a renewable energy technology industry: an international comparison of wind industry policy support mechanisms

    International Nuclear Information System (INIS)

    Lewis, J.I.; Wiser, R.H.

    2007-01-01

    This article examines the importance of national and sub-national policies in supporting the development of successful global wind turbine manufacturing companies. We explore the motivations behind establishing a local wind power industry, and the paths that different countries have taken to develop indigenous large wind turbine manufacturing industries within their borders. This is done through a cross-country comparison of the policy support mechanisms that have been employed to directly and indirectly promote wind technology manufacturing in 12 countries. We find that in many instances there is a clear relationship between a manufacturer's success in its home country market and its eventual success in the global wind power market. Whether new wind turbine manufacturing entrants are able to succeed will likely depend in part on the utilization of their turbines in their own domestic market, which is turn will be influenced by the annual size and stability of that market. Consequently, policies that support a sizable, stable market for wind power, in conjunction with policies that specifically provide incentives for wind power technology to be manufactured locally, are most likely to result in the establishment of an internationally competitive wind industry. (author)

  5. Fostering a renewable energy technology industry: An international comparison of wind industry policy support mechanisms

    International Nuclear Information System (INIS)

    Lewis, Joanna I.; Wiser, Ryan H.

    2007-01-01

    This article examines the importance of national and sub-national policies in supporting the development of successful global wind turbine manufacturing companies. We explore the motivations behind establishing a local wind power industry, and the paths that different countries have taken to develop indigenous large wind turbine manufacturing industries within their borders. This is done through a cross-country comparison of the policy support mechanisms that have been employed to directly and indirectly promote wind technology manufacturing in 12 countries. We find that in many instances there is a clear relationship between a manufacturer's success in its home country market and its eventual success in the global wind power market. Whether new wind turbine manufacturing entrants are able to succeed will likely depend in part on the utilization of their turbines in their own domestic market, which in turn will be influenced by the annual size and stability of that market. Consequently, policies that support a sizable, stable market for wind power, in conjunction with policies that specifically provide incentives for wind power technology to be manufactured locally, are most likely to result in the establishment of an internationally competitive wind industry

  6. Virtual Manufacturing Techniques Designed and Applied to Manufacturing Activities in the Manufacturing Integration and Technology Branch

    Science.gov (United States)

    Shearrow, Charles A.

    1999-01-01

    One of the identified goals of EM3 is to implement virtual manufacturing by the time the year 2000 has ended. To realize this goal of a true virtual manufacturing enterprise the initial development of a machinability database and the infrastructure must be completed. This will consist of the containment of the existing EM-NET problems and developing machine, tooling, and common materials databases. To integrate the virtual manufacturing enterprise with normal day to day operations the development of a parallel virtual manufacturing machinability database, virtual manufacturing database, virtual manufacturing paradigm, implementation/integration procedure, and testable verification models must be constructed. Common and virtual machinability databases will include the four distinct areas of machine tools, available tooling, common machine tool loads, and a materials database. The machine tools database will include the machine envelope, special machine attachments, tooling capacity, location within NASA-JSC or with a contractor, and availability/scheduling. The tooling database will include available standard tooling, custom in-house tooling, tool properties, and availability. The common materials database will include materials thickness ranges, strengths, types, and their availability. The virtual manufacturing databases will consist of virtual machines and virtual tooling directly related to the common and machinability databases. The items to be completed are the design and construction of the machinability databases, virtual manufacturing paradigm for NASA-JSC, implementation timeline, VNC model of one bridge mill and troubleshoot existing software and hardware problems with EN4NET. The final step of this virtual manufacturing project will be to integrate other production sites into the databases bringing JSC's EM3 into a position of becoming a clearing house for NASA's digital manufacturing needs creating a true virtual manufacturing enterprise.

  7. Terrestrial photovoltaic technologies - Recent progress in manufacturing R&D

    Energy Technology Data Exchange (ETDEWEB)

    Witt, C. E.; Surek, T.; Mitchell, R. L.; Symko-Davies, M.; Thomas, H. P.

    2000-05-15

    This paper describes photovoltaics (PV) as used for energy generation in terrestrial applications. A brief historical perspective of PV development is provided. Solar-to-electricity conversion efficiencies for various photovoltaic materials are presented, as well as expectations for further material improvements. Recent progress in reducing manufacturing costs through process R&D and product improvements are described. Applications that are most suitable for the different technologies are discussed. Finally, manufacturing capacities and current and projected module manufacturing costs are presented.

  8. Technology, International Trade, and Pollution from US Manufacturing

    OpenAIRE

    Arik Levinson

    2009-01-01

    Pollution emitted by US manufacturers declined markedly over the past several decades, even as real manufacturing output increased. I first show that most of the decline in US manufacturing pollution has resulted from changing production processes ("technology"), rather than changes in the mix of goods produced. I then show that increased net imports of polluting goods ("international trade") accounts for only a small portion of the pollution reductions from the changing mix of goods. Togethe...

  9. Problems and future outlook in the nuclear equipment manufacturing industry

    International Nuclear Information System (INIS)

    Suenaga, Soichiro

    1984-01-01

    The energy policy in Japan is based on a balance between the energy security and the energy cost for the purpose of realizing optimal supply/demand structure. In this field, nuclear equipment manufacturers should cooperate in the settlement of LWR power generation through plant safety and reliability and through high economical efficiency, all involving the advancement of technology. As a new concept being developed, there is an APWR (advanced PWR) which has the electric output of 1,350 MWe. The export of nuclear power plants, though there are various problems, should be enhanced in the high-technology export area. The following matters are described: the settlement of and the heightening of technology in nuclear power generation, the development of the advanced PWR, and the measures for the export of nuclear power plants and components. (Mori, K.)

  10. Single-use disposable technologies for biopharmaceutical manufacturing.

    Science.gov (United States)

    Shukla, Abhinav A; Gottschalk, Uwe

    2013-03-01

    The manufacture of protein biopharmaceuticals is conducted under current good manufacturing practice (cGMP) and involves multiple unit operations for upstream production and downstream purification. Until recently, production facilities relied on the use of relatively inflexible, hard-piped equipment including large stainless steel bioreactors and tanks to hold product intermediates and buffers. However, there is an increasing trend towards the adoption of single-use technologies across the manufacturing process. Technical advances have now made an end-to-end single-use manufacturing facility possible, but several aspects of single-use technology require further improvement and are continually evolving. This article provides a perspective on the current state-of-the-art in single-use technologies and highlights trends that will improve performance and increase the market penetration of disposable manufacturing in the future. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Factors driving and restraining adoption of Automation technologies in Swedish wood product industry.

    OpenAIRE

    Mapulanga, Mwanza; Saladi, Praveen

    2016-01-01

    Swedish wood product industry contributes significantly to the economy of the country. This industry adds more value to the sawn timber produced in order to manufacture different wooden products. Companies in Swedish wood product industry are presently seen as underdeveloped in terms of investments and developments in automation technologies. Automation technologies are seen by companies as a solution for improving productivity, product quality, manufacturing cost reduction and ultimately imp...

  12. Ergonomics intervention in an Iranian television manufacturing industry.

    Science.gov (United States)

    Motamedzade, M; Mohseni, M; Golmohammadi, R; Mahjoob, H

    2011-01-01

    The primary goal of this study was to use the Strain Index (SI) to assess the risk of developing upper extremity musculoskeletal disorders in a television (TV) manufacturing industry and evaluate the effectiveness of an educational intervention. The project was designed and implemented in two stages. In first stage, the SI score was calculated and the Nordic Musculoskeletal Questionnaire (NMQ) was completed. Following this, hazardous jobs were identified and existing risk factors in these jobs were studied. Based on these data, an educational intervention was designed and implemented. In the second stage, three months after implementing the interventions, the SI score was re-calculated and the Nordic Musculoskeletal Questionnaire (NMQ) completed again. 80 assembly workers of an Iranian TV manufacturing industry were randomly selected using simple random sampling approach. The results showed that the SI score had a good correlation with the symptoms of musculoskeletal disorders. It was also observed that the difference between prevalence of signs and symptoms of musculoskeletal disorders, before and after intervention, was significantly reduced. A well conducted implementation of an interventional program with total participation of all stakeholders can lead to a decrease in musculoskeletal disorders.

  13. Manufacturing the Future: Federal Priorities for Manufacturing Research and Development. Report of the Interagency Working Group on Manufacturing R&D, Committee on Technology, National Science and Technology Council

    Science.gov (United States)

    2008-03-01

    coolant manifolds are constructed on-site. Each connector must be separately cut, prepared, and joined to the subsystem. Prefabrication of...to prepare students for careers in the Manufacturing and Science, Technology, Engineering, and Mathematics career clusters. EPA Ecological and...nanomaterials, along with exposures of human and other species in natural ecosystems to nanomaterials, and industrial ecology related to nanomaterials

  14. INNOVATIONS AS AN IMPORTANT FACTOR INFLUENCING LABOUR PRODUCTIVITY IN THE MANUFACTURING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Marija Bušelić

    2016-12-01

    Full Text Available Economic science has long recognized labour productivity as an important factor of economic growth. In the uncertain conditions of increasingly fierce and complex competition, it becomes one of the key prerequisites for an adequate response to global challenges. The development of labour productivity has to be observed as a multi-dimensional process including numerous interconnected quantitative and qualitative factors, in particular human factors and technological advancement realized through investments in research and development (innovations. The analysis of labour productivity in the manufacturing industry of the selected countries, Germany and China, is performed in the context of an important influential factor – innovations, and interdependently with the economic growth of the selected countries. The research results and the conducted regression analyses indicate a superiority of German labour productivity in the manufacturing industry, which is strongly affected by considerable investments in research and development. However, the technological convergence of China as the upcoming power is increasingly important, which shows that the gap in labour productivity is decreasing, making developed countries face new challenges posed by globalization. The analysis of the interdependence of economic growth (GDP and labour productivity in the manufacturing industry points to a positive link and the conclusion that the elasticity of the GDP to changes in labour productivity is greater in China than in Germany.

  15. Overview of NASA/OAST efforts related to manufacturing technology

    Science.gov (United States)

    Saunders, N. T.

    1976-01-01

    An overview of some of NASA's current efforts related to manufacturing technology and some possible directions for the future are presented. The topics discussed are: computer-aided design, composite structures, and turbine engine components.

  16. Sustainable In-Space Manufacturing through Rapid Prototyping Technology

    Data.gov (United States)

    National Aeronautics and Space Administration — In space manufacturing is crucial to humanity’s continued exploration and habitation of space. While new spacecraft and propulsion technologies promise higher...

  17. Additive manufacturing technologies 3D printing, rapid prototyping, and direct digital manufacturing

    CERN Document Server

    Gibson, Ian; Stucker, Brent

    2015-01-01

    This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given,  beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered  

  18. The Computer Industry. High Technology Industries: Profiles and Outlooks.

    Science.gov (United States)

    International Trade Administration (DOC), Washington, DC.

    A series of meetings was held to assess future problems in United States high technology, particularly in the fields of robotics, computers, semiconductors, and telecommunications. This report, which focuses on the computer industry, includes a profile of this industry and the papers presented by industry speakers during the meetings. The profile…

  19. Critical success factors model developing for sustainable Kaizen implementation in manufactur-ing industry in Ethiopia

    Directory of Open Access Journals (Sweden)

    Haftu Hailu

    2017-12-01

    Full Text Available The purpose of the research is to identify critical success factors and model developing for sustaining kaizen implementation. Peacock shoe is one of the manufacturing industries in Ethiopia facing challenges on sustaining. The methodology followed is factor analysis and empirically testing hypothesis. A database was designed using SPSS version 20. The survey was validated using statistical validation using the Cronbach alpha index; the result is 0.908. The KMO index value was obtained for the 32 items and had a value of 0.642 with Bartlett's Test of Sphericity Approx. Chi-Square 4503.007, degree of freedom 496 and significance value 0.000. A factor analysis by principal components and varimax rotation was applied for finding the critical success factors. Finding designates that 32 items were merged into eight critical success factors. All the eight factors together explain for 76.941 % of the variance. Multiple regression model analysis has indicated that some of the critical success factors had relationship with success indicators. Due to constraint of time, the researcher focused only at peacock shoe manufacturing industry. Other limitation also includes the absence of any local research that shows the critical success factors at the moment.

  20. Disruptive technologies and networking in telecom industries

    DEFF Research Database (Denmark)

    Madsen, Erik Strøjer; Hartington, Simon

    in the telecommunication industry and finds significant similarities between the industry development and the literature on disruptive technology, which finds that incumbent companies are not able to react in a successful way when disruptions occur in their industry. By studying how the telecommunication industry...

  1. Wafer-level manufacturing technology of glass microlenses

    Science.gov (United States)

    Gossner, U.; Hoeftmann, T.; Wieland, R.; Hansch, W.

    2014-08-01

    In high-tech products, there is an increasing demand to integrate glass lenses into complex micro systems. Especially in the lighting industry LEDs and laser diodes used for automotive applications require encapsulated micro lenses. To enable low-cost production, manufacturing of micro lenses on wafer level base using a replication technology is a key technology. This requires accurate forming of thousands of lenses with a diameter of 1-2 mm on a 200 mm wafer compliant with mass production. The article will discuss the technical aspects of a lens manufacturing replication process and the challenges, which need to be solved: choice of an appropriate master for replication, thermally robust interlayer coating, choice of replica glass, bonding and separation procedure. A promising approach for the master substrate material is based on a lens structured high-quality glass wafer with high melting point covered by a coating layer of amorphous silicon or germanium. This layer serves as an interlayer for the glass bonding process. Low pressure chemical vapor deposition and plasma enhanced chemical vapor deposition processes allow a deposition of layer coatings with different hydrogen and doping content influencing their chemical and physical behavior. A time reduced molding process using a float glass enables the formation of high quality lenses while preserving the recyclability of the mother substrate. The challenge is the separation of the replica from the master mold. An overview of chemical methods based on optimized etching of coating layer through small channels will be given and the impact of glass etching on surface roughness is discussed.

  2. NASA's Additive Manufacturing Development Materials Science to Technology Infusion - Connecting the Digital Dots

    Science.gov (United States)

    Vickers, John

    2017-01-01

    At NASA, the first steps of the Journey to Mars are well underway with the development of NASA's next generation launch system and investments in research and technologies that should increase the affordability, capability, and safety of exploration activities. Additive Manufacturing presents a disruptive opportunity for NASA to design and manufacture hardware with new materials at dramatically reduced cost and schedule. Opportunities to incorporate additive manufacturing align very well with NASA missions and with most NASA programs related to space, science, and aeronautics. The Agency also relies on many partnerships with other government agencies, industry and academia.

  3. Initiative research in fiscal 2000 in relation with global environment industrial technologies. Achievement report on investigations and researches of emission-free manufacturing (EFM); 2000 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu seika hokokusho. Emission free manufacturing (EFM) no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Three working groups were established, each having assignments of developing a technology to evaluate environmental load imposed by processing processes, developing a new manufacturing process intended of reducing environmental load, and remarkably improving the existing manufacturing technologies. Investigations and researches were performed on the current technological trends and technological problems in relation with emission-free manufacturing. In the environmental load evaluation technology, it was indicated that the amount of charged energy per one million yen of products made by metal machine tools is 10040 Gcal/M yen, and that, with regard to CO2 emission amount and resource depleting load at the small machining center, the amounts attributable to the raw materials are 80% and 90% respectively, wherein either item can be reduced by recycling iron. For the comprehensive low-emission processing technology, investigations were carried out on a casting process not using sandmolds, substitute lubricants, dry forging, semi-solid processing, and deep drawing process using ultra-high pressure water. For the functional low-emission production technology, investigations were performed on performance improvement in processing machines, energy saving, and reduction in emission. (NEDO)

  4. Factors influencing the technology upgrading and catch-up of Chinese wind turbine manufacturers: Technology acquisition mechanisms and government policies

    International Nuclear Information System (INIS)

    Qiu, Yueming; Ortolano, Leonard; David Wang, Yi

    2013-01-01

    This paper uses firm level data for the Chinese wind turbine manufacturing industry from 1998 to 2009 to quantify the effects of technology acquisition mechanisms – purchasing production licenses from foreign manufacturers, joint design with foreign design firms, joint-ventures and domestic R and D – on wind turbine manufacturers' technology levels (as measured by turbine size, in megawatts). It also examines the impacts of government policies on manufacturer technology levels. Technology upgrading (measured by increase of turbine size) and catch-up (measured by decrease in the distance to the world technology frontier in terms of turbine size) are used to measure advances in technology level. Results from econometric modeling studies indicate that firms' technology acquisition mechanisms and degree of business diversification are statistically significant factors in influencing technology upgrading. Similar results were found for the catch-up variable (i.e., distance to the world technology frontier). The influence of government policies is significant for technology upgrading but not catch-up. These and other modeling results are shown to have implications for both policymakers and wind turbine manufacturers. - Highlights: ► Technology acquired through joint design has the highest level. ► Technology acquired through purchasing production license has the lowest level. ► Technology acquired through domestic R and D has the level in between. ► A firm with related other businesses tends to have a higher level of technology. ► The influence of policies is significant for technology upgrade but not catch-up

  5. Tests for manufacturing technology of disposal canisters for nuclear spent fuel

    International Nuclear Information System (INIS)

    Raiko, H.; Salonen, T.; Meuronen, I.; Lehto, K.

    1999-06-01

    The summary and status of the results of the manufacturing technology programmes concerning the disposal canister for spent nuclear fuel conducted by Posiva Oy are given in this report. Posiva has maintained a draft plan for a disposal canister design and an assessment of potential manufacturing technologies for about ten years in Finland. Now, during the year 1999, the first full scale demonstration canister is manufactured in Finland. The technology used for manufacturing of this prototype is developed by Posiva Oy mainly in co-operation with domestic industry. The main partner in developing the manufacturing technology for the copper shell has been Outokumpu Poricopper Oy, Pori, Finland, and the main partner in developing the technology for the iron insert of the canister has been Valmet Oyj Rautpohja Foundry, Jyvaeskylae, Finland. In both areas many subcontractors have been used, predominantly domestic engineering workshops, but also some foreign subcontractors, e.g. for EB-welding, who have had large enough welding equipment. This report describes the developing programmes for canister manufacturing, evaluates the results and presents some alternative methods, and tries to evaluate the pros and contras of them. In addition, the adequacy of the achieved technological know-how is assessed in respect of the required quality of the disposal canister. The following manufacturing technologies have been the concrete topics of the development programme: Electron beam welding technology development for thick-walled copper, Casting of massive copper billets, Hot rolling of thick-walled copper plates, Hot pressing and forging in lid manufacture, Extrusion and drawing of copper tubes, Bending of copper plates by roller or press, Machining of copper, Residual stress removal by heat treatment, Non-destructive testing, Long-term strength of EB-welds, Casting and machining of the iron insert of the canister The specialists from all the main developing partner companies have

  6. The Effect of the Implementation of Advanced Manufacturing Technologies on Training in the Manufacturing Sector

    Science.gov (United States)

    Castrillon, Isabel Dieguez; Cantorna, Ana I. Sinde

    2005-01-01

    Purpose: The aim of this article is to gain insight into some of the factors that determine personnel-training efforts in companies introducing advanced manufacturing technologies (AMTs). The study provides empirical evidence from a sector with high rates of technological modernisation. Design/methodology/approach: "Ad hoc" survey of 90…

  7. Industrial Wireless Technology for the 21st Century

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2002-12-01

    In July 2002, the U.S. Department of Energy's Industrial Technologies Program sponsored the Industrial Wireless Workshop as a forum for articulating some long-term goals that may help guide the development of industrial wireless sensor systems. Over 30 individuals, representing manufacturers and suppliers, end users, universities, and national laboratories, attended the workshop in San Francisco and participated in a series of facilitated sessions. The workshop participants cooperatively developed a unified vision for the future and defined specific goals and challenges. This document presents the results of the workshop as well as some context for non-experts.

  8. A new application for food customization with additive manufacturing technologies

    Science.gov (United States)

    Serenó, L.; Vallicrosa, G.; Delgado, J.; Ciurana, J.

    2012-04-01

    Additive Manufacturing (AM) technologies have emerged as a freeform approach capable of producing almost any complete three dimensional (3D) objects from computer-aided design (CAD) data by successively adding material layer by layer. Despite the broad range of possibilities, commercial AM technologies remain complex and expensive, making them suitable only for niche applications. The developments of the Fab@Home system as an open AM technology discovered a new range of possibilities of processing different materials such as edible products. The main objective of this work is to analyze and optimize the manufacturing capacity of this system when producing 3D edible objects. A new heated syringe deposition tool was developed and several process parameters were optimized to adapt this technology to consumers' needs. The results revealed in this study show the potential of this system to produce customized edible objects without qualified personnel knowledge, therefore saving manufacturing costs compared to traditional technologies.

  9. Exploring the evolution of investment pattern on advanced manufacturing technology

    DEFF Research Database (Denmark)

    Yang, Cheng; Matthiesen, Rikke Vestergaard; Johansen, John

    2014-01-01

    This paper explores the evolution of investment pattern on advanced manufacturing technology in a manner that builds on a longitudinal perspective. Based on the data of investments in AMTs from 567 manufacturing companies this paper develops a longitudinal taxonomy defined by the evolution of inv...... of technology management, which is comprised primarily of cross-sectional studies that do not address the dynamic nature of investments in AMTs.......This paper explores the evolution of investment pattern on advanced manufacturing technology in a manner that builds on a longitudinal perspective. Based on the data of investments in AMTs from 567 manufacturing companies this paper develops a longitudinal taxonomy defined by the evolution...... of investment patterns on AMT followed by companies over time; identifies the possible evolutionary features of different groups of companies; and suggests the possible explanatory and outcome factors on the evolution of investment pattern on AMTs. By doing so, this study seeks to fill a void in the area...

  10. Research on Digital Product Modeling Key Technologies of Digital Manufacturing

    Institute of Scientific and Technical Information of China (English)

    DING Guoping; ZHOU Zude; HU Yefa; ZHAO Liang

    2006-01-01

    With the globalization and diversification of the market and the rapid development of Information Technology (IT) and Artificial Intelligence (AI), the digital revolution of manufacturing is coming. One of the key technologies in digital manufacturing is product digital modeling. This paper firstly analyzes the information and features of the product digital model during each stage in the product whole lifecycle, then researches on the three critical technologies of digital modeling in digital manufacturing-product modeling, standard for the exchange of product model data and digital product data management. And the potential signification of the product digital model during the process of digital manufacturing is concluded-product digital model integrates primary features of each stage during the product whole lifecycle based on graphic features, applies STEP as data exchange mechanism, and establishes PDM system to manage the large amount, complicated and dynamic product data to implement the product digital model data exchange, sharing and integration.

  11. Manufacturing radioactive material for medical, research and industrial applications

    International Nuclear Information System (INIS)

    Seidel, C.W.

    1992-01-01

    Hospitals, clinics and other medical complexes are among the most extensive users of radioactive material. Nuclear medicine uses radioactive solutions of Tc-99m, Tl-201, Ga-67, I-123, Xe-133 and other radiopharmaceuticals as diagnostic tools to evaluate dynamic functions of various organs in the body, detect cancerous tumors, sites of infection or other bodily dysfunctions. Examples of monitoring blood flow to the brain of a cocaine addict will be shown. Many different radionuclides are also produced for life science research and industrial applications. Some require long irradiations and are needed only periodically. Radiopharmaceutical manufactures look for reliable suppliers that can produce quality product at a reasonable cost. Worldwide production of the processed and unprocessed radionuclides and the enriched stable nuclides that are the target materials used in the accelerators and reactors around the world will be discussed. (author)

  12. Environmental health survey in asbestos cement sheets manufacturing industry.

    Science.gov (United States)

    Ansari, F A; Bihari, V; Rastogi, S K; Ashquin, M; Ahmad, I

    2007-01-01

    About 673 small-scale asbestos mining and milling facilities and 33 large - scale asbestos manufacturing plants, (17 asbestos-cement product manufacturing plants and 16 other than asbestos-cement product plants) are situated in India. The present study reveals the exposure of commercial asbestos (chrysotile) in the occupational as well as ambient air environment of the asbestos-cement (AC) sheets industry using membrane filter method of Bureau of Indian Standards (BIS). The fibre concentrations in 15 samples collected in the occupational environment at ingredient feeding site, sheet-producing site, fibre godown were 0.079, 0.057 and 0.078 f/cc, respectively and in five samples from surrounding ambient air at factory gate resulted fibre concentration of 0.071 f/cc. All the samples have shown fibre concentration lower than the threshold limit values (TLVs) prescribed by BIS. Morphological analysis of samples, further under phase contrast and polarized microscopy indicates the presence of chrysotile asbestos, which acts as carcinogen as well as co-carcinogen. A clinical examination of exposed subjects reveals that there was no case of clubbing, crepitation, ronchi and dyspnea on exertion; however, obstruction and restriction were 10.9 per cent and 25 per cent in exposed subjects, respectively while in control there were 12 per cent and 28 per cent, respectively. The study revealed that chrysotile asbestos is emitted in the occupational as well as ambient environment that may cause adverse health impact.

  13. DETERMINING THE NEED FOR ZERO SERIES EXECUTION IN MANUFACTURING PROCESSES IN THE TEXTILE GARMENT INDUSTRY

    Directory of Open Access Journals (Sweden)

    OANA Ioan Pave

    2017-05-01

    Full Text Available Because the industrial production requires the application of some transformation procedures on the material resources, so that a clothing product comes out with optimal use value in terms of maximum economic efficiency, one of the main influencial factors is the quality of the products. To make manufacturing processes more efficient, it is necessary to carry out the zero series in order to ensure the quality of the technological processes, as well as to prevent some design deficiencies. Among the main operations undertaken to ensure the quality of the zero series, we mention: creating the conditions for launch, tracking and finalizing the accompanying production documents under similar series production conditions; zero-series producers are usually the same workers who make up the series production line; equipping with the appropriate equipment and providing with necessary devices in order to create the technical conditions for the execution of the zero series; providing technical assistance in relation to manufacturing and control documentation for eliminating the design deficiencies. This paper presents the architecture of the zero series execution in manufacturing processes in the textile garment industry. The information obtained from the zero-series analysis is directed to the technical support, for possible corrections of the patterns according to which the products were manufactured.

  14. Office of Industrial Technologies research in progress

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

  15. Development of polymer catalyst manufacturing technology

    International Nuclear Information System (INIS)

    Chung, Heung Seok; Kim, Yong Ik; Lee, Han Soo; Kang, Hui Seok; Seong, Ki Ung; Na, Jeong Won; An, Do Hui; Kim, Kwang Rak; Cho, Young Hyeon; Baek, Seung Uh; Jeong, Yong Won

    1993-01-01

    Heavy water is used as moderator and coolant in Pressurized Heavy Water Power Plants. According to the governmental long-term plan for power supply, Korea is scheduled to construct new six pressurized heavy water power plants till the year 2006. Total heavy water demand for these plants would be 3892 Mg during the period 1992-2006. Reformed hydrogen processes are considered best suited to Korea. Hydrophobic catalysts for this process were manufactured and the performance of hydrogen isotope exchance was investigated. The overall mass transfer coefficients varied between 0.004 and 2.295 m 3 HD/m 3 Bed.sec. and heavy water separation processes using the catalysts were optimized. (Author)

  16. Introducing a Novel Hybrid Artificial Intelligence Algorithm to Optimize Network of Industrial Applications in Modern Manufacturing

    Directory of Open Access Journals (Sweden)

    Aydin Azizi

    2017-01-01

    Full Text Available Recent advances in modern manufacturing industries have created a great need to track and identify objects and parts by obtaining real-time information. One of the main technologies which has been utilized for this need is the Radio Frequency Identification (RFID system. As a result of adopting this technology to the manufacturing industry environment, RFID Network Planning (RNP has become a challenge. Mainly RNP deals with calculating the number and position of antennas which should be deployed in the RFID network to achieve full coverage of the tags that need to be read. The ultimate goal of this paper is to present and evaluate a way of modelling and optimizing nonlinear RNP problems utilizing artificial intelligence (AI techniques. This effort has led the author to propose a novel AI algorithm, which has been named “hybrid AI optimization technique,” to perform optimization of RNP as a hard learning problem. The proposed algorithm is composed of two different optimization algorithms: Redundant Antenna Elimination (RAE and Ring Probabilistic Logic Neural Networks (RPLNN. The proposed hybrid paradigm has been explored using a flexible manufacturing system (FMS, and results have been compared with Genetic Algorithm (GA that demonstrates the feasibility of the proposed architecture successfully.

  17. Success of manufacturing industries – Role of Six Sigma

    Directory of Open Access Journals (Sweden)

    Venkatesh N.

    2018-01-01

    Full Text Available Six Sigma is a phenomenal quality management concepts which has helped many organizations to overcome quality crisis in the recent past. Six Sigma is observed as a very promising quality management tool for any organization to make its presence felt in the corporate world as it emphasizes on obtaining a fruitful solution to improve accuracy, reduce defect thereby reduce the cost and improve profits. The main objective of this investigation is to unearth the extent to which the companies have been benefitted due to Six Sigma implementation. This article presents the results based on the analysis of collective opinion of employees of various Indian manufacturing industries that have implemented Six Sigma. This research also examines interrelationship among various parameters defined in the research. The research revealed that industries are benefitted irrespective of their nature in terms of their growth, financial benefits, productivity and satisfaction of the customer. However, peoples’ equity that deals with the benefits that employees obtain after Six Sigma implementation is not certain. The research also revealed the existence of strong interrelationship among various parameters used to measure the success of Six Sigma.

  18. 2014 International Conference on Manufacturing, Optimization, Industrial and Material Engineering

    International Nuclear Information System (INIS)

    Gaol, Ford Lumban; Webb, Jeff; Ding, Jun

    2014-01-01

    The 2nd International Conference on Manufacturing, Optimization, Industrial and Material Engineering 2014 (MOIME 2014), was held at the Grand Mercure Harmoni, Opal Room 3rd Floor, Jakarta, Indonesia, during 29–30 March 2014. The MOIME 2014 conference is designed to bring together researchers, engineers and scientists in the domain of interest from around the world. MOIME 2014 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that relate to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 97 papers and after rigorous review, 24 papers were accepted. The participants come from 7 countries. There are 4 (four) parallel session and 2 Invited Speakers and one workshop. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of MOIME 2014. The Editors of the MOIME 2014 Proceedings Editors Dr Ford Lumban Gaol Jeff Webb, PhD Professor Jun Ding, PhD

  19. Manufacturing Methods and Technology. Project Summary Reports.

    Science.gov (United States)

    1980-06-01

    blisks and HECTRAN was used for the impeller. Task 2: Various ways were studied for finishing the airfoil surfaces. After tests with electrochemical ...ASSEMKlY SYSTEMl TEST SET d H4ARNESS SEQUENCE R1EELER TERMINATED WINE REELER ~1TUREWIRE TERMINATION FUUEWORE PREPARATION Figure 1 - System Concepts...demonstrate the system to Government and Industry and provide documentation on the system so that it could be obtained and applied. Analysis of harness

  20. New Technologies and Sustainable Development of Industry

    International Nuclear Information System (INIS)

    Muggli, Christoph; Baumgartner, Walter; Werner, Frank

    1996-08-01

    The present technology assessment study examines the effects of three technology scenarios on future energy consumption and the energy-related emissions by industrial manufacturing in Switzerland. The three paths of development (Trend, High-Tech, Alternative) can be represented as follows: After a reduction until 2015, the Trend development entails a slight increase in consumption of energy. Until then consumption is some 10 percent lower in both the High-Tech and the Alternative Scenarios. Consumption of electricity increases in all scenarios, the proportion is highest in 20 year's time under the High-Tech scenario. SO 2 and CO 2 emissions decrease in all scenarios until 2000 and then level out at a low level. The emissions are lowest in the High-Tech scenario. In contrast the NO x and the VOC emissions diminish until 2000 and then rise again continuously. At this juncture important bases are still not yet available for a definitive evaluation with respect to the sustainable development. Sustainability objectives are currently being compiled for Switzerland in the wake of the Berlin Climate Conference and the Rio Conference. In the political lobbies the Green factions are making demands, such as those currently under discussion internationally (e.g. CO 2 reductions on a scale of some 80 percent by 2050), whereas conservative and industrial circle representatives support the objective of sustainable development but reject a quantification of objectives. The official objectives of the Swiss Energy 2000 programme can be achieved with all scenarios. With the High-Tech and Alternative scenarios, concepts of a reduction in CO 2 by 20 percent by 2015 (as currently under discussion in Switzerland), are realistic. However, further energy-relevant efficiency potentials in industrial production can be activated by energy-policy motivated measures. More extensive objectives, such as e.g. a CO 2 reduction of 50 percent, are hardly attainable, even in the long-term, without

  1. The trade specialization of SANE: Evidence from manufacturing industries

    Directory of Open Access Journals (Sweden)

    Alessandrini, Michele

    2010-06-01

    Full Text Available This paper studies the evolution of the foreign trade specialization in manufacturing sectors of South Africa, Algeria, Nigeria and Egypt. These four countries, the so-called SANE, have recently been viewed as Africa's best chance of producing an economic bloc whose role for Africa might be comparable to that of the BRIC economies of Brazil, Russia, India and China for the world economy. Using data on trade flows since mid-1970s, the results show that the SANE group has experienced few changes in its trade structure, which is still based on low-technology and slow-growth world demand sectors. The degree of persistence in the specialization model is higher in the case of Algeria and Nigeria, where the dependence on products based on natural resources is stronger.

  2. Advanced laser processing for industrial solar cell manufacturing (ALPINISM)

    Energy Technology Data Exchange (ETDEWEB)

    Mason, N.B.; Fieret, J. [Exitech Ltd. (United Kingdom)

    2006-05-04

    The study was aimed at improving methods for the manufacture of high efficiency solar cells and thereby increase production rates. The project focused on the laser grooved buried contact solar cell (LGBC) which is produced by high-speed laser machining. The specific objectives were (i) to optimise the laser technology for high speed processing; (ii) to optimise the solar cell process conditions for high speed processing; (iii) to produce a prototype tool and demonstrate high throughput; and (iv) to demonstrate increased cell efficiency using laser processing of rear contact. Essentially, all the objectives were met and Exitech have already sold six production tools and one research tool developed in this study. In addition, it was found that laser processing at the rear cell surface offers the prospect of LGBC solar cells with an efficiency of 20 per cent. BP Solar Limited carried out this work under contract to the DTI.

  3. Scope of Internal Supply Chain Management Benchmarking in Indian Manufacturing Industries

    OpenAIRE

    Kailash; Rajeev Kumar Saha; Sanjeev Goyal

    2017-01-01

    Internal supply chain management benchmarking practice is necessary to overcome manufacturing industrial performance gap. The main purpose of this research work is to combine the benchmarking and internal supply chain practices to improve the performance of Indian manufacturing industries. In this paper, the main aim is to discuss the components of internal supply chain between suppliers and customers after that explain the scope of ISCM benchmarking in manufacturing industries.

  4. Incorporating DSA in multipatterning semiconductor manufacturing technologies

    Science.gov (United States)

    Badr, Yasmine; Torres, J. A.; Ma, Yuansheng; Mitra, Joydeep; Gupta, Puneet

    2015-03-01

    Multi-patterning (MP) is the process of record for many sub-10nm process technologies. The drive to higher densities has required the use of double and triple patterning for several layers; but this increases the cost of the new processes especially for low volume products in which the mask set is a large percentage of the total cost. For that reason there has been a strong incentive to develop technologies like Directed Self Assembly (DSA), EUV or E-beam direct write to reduce the total number of masks needed in a new technology node. Because of the nature of the technology, DSA cylinder graphoepitaxy only allows single-size holes in a single patterning approach. However, by integrating DSA and MP into a hybrid DSA-MP process, it is possible to come up with decomposition approaches that increase the design flexibility, allowing different size holes or bar structures by independently changing the process for every patterning step. A simple approach to integrate multi-patterning with DSA is to perform DSA grouping and MP decomposition in sequence whether it is: grouping-then-decomposition or decomposition-then-grouping; and each of the two sequences has its pros and cons. However, this paper describes why these intuitive approaches do not produce results of acceptable quality from the point of view of design compliance and we highlight the need for custom DSA-aware MP algorithms.

  5. Rapid Analysis and Manufacturing Propulsion Technology (RAMPT)

    Science.gov (United States)

    Fikes, John C.

    2018-01-01

    NASA's strategic plan calls for the development of enabling technologies, improved production methods, and advanced design and analysis tools related to the agency's objectives to expand human presence in the solar system. NASA seeks to advance exploration, science, innovation, benefits to humanity, and international collaboration, as well as facilitate and utilize U.S. commercial capabilities to deliver cargo and crew to space.

  6. Welding and manufacture technology of three-layer bellows

    International Nuclear Information System (INIS)

    Dou Zhengping; Jiang Yunbo; Xie Zhiqiang; Pei Qiusheng; Wang Jindong; Zhang Zhiqiang

    2005-01-01

    Using argon tungsten arc welding the technology research and manufacture was carried out for three-layer bellows with the diameter of 350 mm or 230 mm. The theory rigidity and fatigue intensity of welded bellows were experimentally confirmed, the reasonable welding parameters was selected, and three-layer welded bellows with the diameter of 350 mm or 230 mm were manufactured. Quality of welded bellows accords with techniques standard. (authors)

  7. Forecasting the Success of Implementing Sensors Advanced Manufacturing Technology

    OpenAIRE

    Cheng-Shih Su; Shu-Chen Hsu

    2014-01-01

    This paper is presented fuzzy preference relations approach to forecast the success of implementing sensors advanced manufacturing technology (AMT). In the manufacturing environment, performance measurement is based on different quantitative and qualitative factors. This study proposes an analytic hierarchical prediction model based on fuzzy preference relations to help the organizations become aware of the essential factors affecting the AMT implementation, forecasting the chance of successf...

  8. Future Role of Application of New Technologies in Small-and Medium Scale Manufacturing Systems - Regarding Intelligent and Advanced Manufacturing Systems in Northern Peripheral Area

    OpenAIRE

    Somlò, Kinga; Sziebig, Gabor

    2017-01-01

    Accepted manuscript version. Link to publishers version: http://doi.org/10.1109/ISIE.2017.8001510 Nowadays the concept of Industry 4.0. and the relating intelligent manufacturing system are getting more and more current and well-known. In the past years the outstanding development of different areas such as information technology computer science, machining, robotics and so on, made possible a comprehensive transformation of the manufacturing systems. Present paper aims to give a gener...

  9. Assessment of University- Industry Collaboration and Technology ...

    African Journals Online (AJOL)

    Despite the cultural differences between university and industry, the mutual benefits from collaboration between university and industry have long been recognized in the advanced countries. Recently, the issue of technology transfer and collaboration between universities and industries has been receiving attention in the ...

  10. Developing Technological Capabilities in Agro-Industry

    DEFF Research Database (Denmark)

    Whitfield, Lindsay

    2012-01-01

    This article examines the emergence and trajectory of a new agro-industry in Ghana, the pineapple export industry, using the technological capabilities approach. It explains the limited expansion of the industry and its declining competitiveness in the face of new competition by looking at how...

  11. Manufacturing microsystems-on-a-chip with 5-level surface micromachining technology

    Energy Technology Data Exchange (ETDEWEB)

    Sniegowski, J.; Rodgers, M.S.

    1998-05-01

    An agile microsystem manufacturing technology has been developed that provides unprecedented 5 levels of independent polysilicon surface-micromachine films for the designer. Typical surface-micromachining processes offer a maximum of 3 levels, making this the most complex surface-micromachining process technology developed to date. Leveraged from the extensive infrastructure present in the microelectronics industry, the manufacturing method of polysilicon surface-micromachining offers similar advantages of high-volume, high-reliability, and batch-fabrication to microelectromechanical systems (MEMS) as has been accomplished with integrated circuits (ICs). These systems, comprised of microscopic-sized mechanical elements, are laying the foundation for a rapidly expanding, multi-billion dollar industry 2 which impacts the automotive, consumer product, and medical industries to name only a few.

  12. A NEW Curriclum for Manufacturing & Industrial Engineering and Engineering Management for Bs and Ms Degrees

    OpenAIRE

    SARI, Zaki

    2012-01-01

    This paper deals with the design and implementation of a new curriclum for manufacturing & industrial engineering and engineering management for bachelor and master degrees at tlemcen university, algeria

  13. BARRIERS TO THE USE OF RADIATION-CURABLE ADHESIVES IN THE COATED AND LAMINATED SUBSTRATE MANUFACTURING INDUSTRY

    Science.gov (United States)

    The paper gives results of an investigation of barriers to the use of radiation-cured technology in the coated and laminated substrate manufacturing industry. t presents information gathered from radiation-curable coating and equipment suppliers as well as technical publications....

  14. Importance of Advanced Planning of Manufacturing for Nuclear Industry

    Directory of Open Access Journals (Sweden)

    Shykinov Nick

    2016-06-01

    Full Text Available In the context of energy demands by growing economies, climate changes, fossil fuel pricing volatility, and improved safety and performance of nuclear power plants, many countries express interest in expanding or acquiring nuclear power capacity. In the light of the increased interest in expanding nuclear power the supply chain for nuclear power projects has received more attention in recent years. The importance of the advanced planning of procurement and manufacturing of components of nuclear facilities is critical for these projects. Many of these components are often referred to as long-lead items. They may be equipment, products and systems that are identified to have a delivery time long enough to affect directly the overall timing of a project. In order to avoid negatively affecting the project schedule, these items may need to be sourced out or manufactured years before the beginning of the project. For nuclear facilities, long-lead items include physical components such as large pressure vessels, instrumentation and controls. They may also mean programs and management systems important to the safety of the facility. Authorized nuclear operator training, site evaluation programs, and procurement are some of the examples. The nuclear power industry must often meet very demanding construction and commissioning timelines, and proper advanced planning of the long-lead items helps manage risks to project completion time. For nuclear components there are regulatory and licensing considerations that need to be considered. A national nuclear regulator must be involved early to ensure the components will meet the national legal regulatory requirements. This paper will discuss timing considerations to address the regulatory compliance of nuclear long-lead items.

  15. Development of MOX manufacturing technology in BNFL

    International Nuclear Information System (INIS)

    Buchan, P.G.; Powell, D.J.; Edwards, J.

    1998-01-01

    BNFL is successfully operating a small scale MOX fuel fabrication facility at its Sellafield Site and is currently constructing an advanced, commercial scale MOX facility to complement its existing LWR UO 2 fabrication capability. BNFL's MOX fuel capability is fully supported by a comprehensive technology development programme aimed at providing a high quality product which is successfully competing in the market. Building on the experience gained over the last 30 years, is from the production of both thermal and fast reactor MOX fuels, BNFL's development team set a standard for its MOX product which is targeted at exceeding the performance of UO 2 fuel in reactor. In order to meet the stringent design requirements the product development team has introduced the Short Binderless Route (SBR) process that is now used routinely in BNFL's MOX Demonstration Facility (MDF) and which forms the basis for BNFL's large scale Sellafield MOX Plant. This plant not only uses the SBR process for MOX production but also incorporates the most advanced technology available anywhere in the world for nuclear fuel production. A detailed account of the technology developed by BNFL to support its MOX fuels business will be provided, together with an explanation of the processes and plants used for MOX fuel production by BNFL. The paper also looks at the future needs of the MOX business and how improvements in pellet design can assist the MOX fabrication production process to meet the user demand requirements of utilities around the world. (author)

  16. Technology in Hospitality Industry: Prospects and Challenges

    OpenAIRE

    Kansakar, Prasanna; Munir, Arslan; Shabani, Neda

    2017-01-01

    The leisure and hospitality industry is one of the driving forces of the global economy. The widespread adoption of new technologies in this industry over recent years has fundamentally reshaped the way in which services are provided and received. In this paper, we explore some of the state-of-the-art technologies currently employed in the hospitality industry and how they are improving guest experiences and changing the hospitality service platform. We also envision some potential future hos...

  17. Desemprego tecnológico: Ricardo, Marx e o caso da indústria de transformação Brasileira (1990-2007 Technological unemployment: Ricardo, Marx, and the case of the manufacturing industry in Brazil (1990-2007

    Directory of Open Access Journals (Sweden)

    Joaquim Miguel Couto

    2011-08-01

    Full Text Available A questão do desemprego tecnológico preocupou a mente de dois dos maiores pensadores da ciência econômica: David Ricardo e Karl Marx. Ambos acreditaram que a introdução de novas máquinas poderia causar uma situação de desemprego crônico durante certo período de tempo. No entanto, esta era apenas uma possibilidade, que já havia ocorrido no capitalismo industrial inglês, mas que poderia ser evitada caso novos investimentos absorvessem a mão de obra dispensada pela introdução de nova maquinaria. O Brasil, por sua vez, passou, ao longo da década de 1990, por um período de reestruturação de seu parque industrial que, mediante a metodologia utilizada em nosso estudo, resultou na conclusão da existência do fenômeno do desemprego tecnológico durante boa parte da referida década.The issue of technological unemployment was a cause for concern for two of the greatest thinkers in the field of economic science: David Ricardo and Karl Marx. Both believed that the introduction of new machines could bring about chronic unemployment for a certain period of time. However, this was only a possibility that had already taken place within English industrial capitalism, but that could be avoid if new investments absorbed the workforce laid off by the introduction of new machinery. In the case of Brazil, the country underwent a restructuring period of its industrial base during the 1990s, which according to the methodology employed in our study, verified the existence of the technological unemployment phenomenon during much of the aforementioned decade.

  18. ECONOMIC EFFECT OF INTRODUCTION OF MODULAR TECHNOLOGY IN RAILWAY INDUSTRY

    Directory of Open Access Journals (Sweden)

    Artem Bilous

    2015-11-01

    Full Text Available The purpose of the paper is to explore the current state of the railway engineering industry in the world, the problems of its development prospects, especially the introduction of the modular process technology and economic impact of its introduction. Methodology. The research is based on statistical information from public sources, which is used to confirm the veracity of the thesis put forward about the feasibility of further implementation of the principle of modularity in the railway engineering sector. Data was also obtained from the websites of manufacturers of railway equipment. Also, in the study of the issue, analytical articles on the economic development of the sector of railway engineering in the world were used. Results of the research showed that today, in transport engineering industry, in particular – in the railway engineering, there is a problem of inefficient implementation and use of technological developments, which are used in the manufacture of railway rolling stock. Many technical solutions are duplicated, leading to more time and financial costs. At the same time, there is no free access to information about existing technical solutions, which significantly slows down the development of rail transport. One of the main solutions to the problem is the use of modular technology in the design and manufacture of rolling stock. Leading global manufacturers have already begun to use the modules in the production of their rolling stock, but the technology is not yet sufficiently developed and finds its realization only in reducing the costs of production of rolling stock by specific manufacturers. The full benefits of the new technology have not yet been obtained by producers and operators. Thus, there is a considerable margin for the implementation of modular technology in the production of railway vehicles, which will result in further reducing both production costs and the costs of maintenance, operation and repair of

  19. Study of skin and mucous membrane disorders among workers engaged in the sodium dichromate manufacturing industry and chrome plating industry.

    Science.gov (United States)

    Singhal, Vijay Kumar; Deswal, Balbir Singh; Singh, Bachu Narayan

    2015-01-01

    Inhalation of dusts and fumes arising during the manufacture of sodium dichromate from chrome ore, chromic acid mist emitted during electroplating, and skin contact with chromate produce hazards to workers. (1) To elucidate the prevalence of skin and mucous membrane disorders among the workers engaged in the sodium dichromate manufacturing industry and chrome plating industry. (2) To know the relationship of prevalence with the duration of exposure to chrome mist, dust, and fumes. A cross-sectional study was conducted among all the workers engaged in sodium dichromate manufacturing and chrome plating from several industries situated near the Delhi-Haryana border in the districts of Faridabad and Sonepat of Haryana, India from January 01, 2014 to December 31, 2014. All the workers available from the concerned industries for the study were interviewed and medically examined after obtaining their informed consent. A total of 130 workers comprising 66 workers from the sodium dichromate manufacturing industry and 64 workers from the chrome plating industry were examined on a pretested schedule. Descriptive statistical methods (proportions, relative risk, and Chi-square test of significance with P value analyzed using Epi Info version 7). All the workers were found to be males and of the adult age group. Out of the total examined, 69.69% and 56.22% of the workers had disorders of the nasal mucous membrane in the sodium dichromate manufacturing industry and the chrome plating industry, respectively. 42.42% and 28.22% of the workers had perforation of the nasal septum in the sodium dichromate manufacturing industry and chrome plating industry, respectively. 6.06% and 3.12% workers had skin ulcers in the sodium dichromate manufacturing industry and chrome plating industry, respectively. Nasal irritation and rhinorrhea were the most commonly found symptoms in both the processes. 48.48% and 90.52% of the workers were using hand gloves in the sodium dichromate manufacturing

  20. Problems and Instruments of Product and Technological Diversification of Manufacturing

    Directory of Open Access Journals (Sweden)

    Kuzmin Oleg Ye.

    2015-03-01

    Full Text Available The purpose of the article involves identification of objectives and development of instruments for product and technological diversification aimed at updating the range of products and introducing innovative technologies, which will ensure a high level of competitiveness and create preconditions for steady development of the enterprise. As a result of studying the literary sources the objectives and instruments for development of enterprises by means of product and technological diversification have been defined. The article suggests effective instruments of product and technological diversification of manufacturing, namely: the model of expansion of the product range, multi-criteria model of optimization of the product range, a modified model of Kantorovich-Koopmans for implementing new production technologies with set limits on the product output. Further research relate to formation of instruments for manufacturing diversification by means of introducing new types of production.

  1. The application of welding technology in power plant manufacture

    International Nuclear Information System (INIS)

    Price, A.T.; Chew, B.

    1989-02-01

    A strategy is presented for the application of welding technology in the manufacture of power plant. A flow chart description is adopted in the present paper to provide a general framework outlining the sequence of activities leading to manufacture. The broad chronological order of events is treated under the three headings, Component Design, Welding Development, and Implementation. Important factors that have to be considered at each of these stages are shown in subsidiary flow charts together with short notes to provide context and an aide memoire for those involved in welding technology. (author)

  2. Thermal comfort study of plastics manufacturing industry in converting process

    Directory of Open Access Journals (Sweden)

    Sugiono Sugiono

    2017-09-01

    Full Text Available Thermal comfort is one of ergonomics factors that can create a significant impact to workers performance. For a better thermal comfort, several environment factors (air temperature, wind speed and relative humidity should be considered in this research. The object of the study is a building for converting process of plastics manufacturing industry located in Malang, Indonesia. The maximum air temperature inside the building can reach as high as 36°C. The result of this study shows that heat stress is dominantly caused by heat source from machine and wall building. The computational fluid dynamics (CFD simulation is used to show the air characteristic through inside the building. By using the CFD simulation, some scenarios of solution are successfully presented. Employees thermal comfort was investigated based on predicted mean vote model (PMV and predicted percentage of dissatisfied model (PPD. Existing condition gives PMV in range from 1.83 to 2.82 and PPD in range from 68.9 to 98%. Meanwhile, modification of ventilation and replacing ceiling material from clear glass into reflective clear glass gave significant impact to reduce PMV into range from 1.63 to 2.18 and PPD into range from 58.2 to 84.2%. In sort, new design converting building process has more comfortable for workers.

  3. Construction of corporate social performance indicators for Czech manufacturing industry

    Directory of Open Access Journals (Sweden)

    Marie Dočekalová

    2013-01-01

    Full Text Available This article aims to map out the level of social performance measurement of Czech companies, i.e. what social performance indicators companies monitor and what information they provide to their stakeholders and to construct alternative corporate social performance indicators. Based on an analysis of 24 corporate voluntary reports and results of an empirical research performed among 79 large companies operating in the manufacturing industry, it was found that companies partially monitor their social performance, but from the perspective of international standards (e.g. Global Reporting Initiative, International Federation of Accountants it is still insufficient. Czech companies usually provide only absolute numbers which disguise real trends and do not allow year on year comparison or comparison with other companies. Czech companies should provide a comprehensive picture of their overall performance, they should not focus only on financial indicators based on accounting data, since it is known that the performance measurement based only on financial and economic performance does not lead to long-term success and sustainability of organizations. Companies should monitor more their impact on society within which they operate. Proposed corporate social performance indicators in a measurable and thus manageable way express social issues.

  4. Characterization of new international business of traditional manufacturing industries

    Directory of Open Access Journals (Sweden)

    Santiago Cantarero Sanz

    2013-07-01

    Full Text Available The main objective of this study was to study the characteristics of the New International Business (NIS or Born-Global in a sample of 81 SMEs belonging to the Spanish textile sector. This is descriptive analysis regarding the location, the subsector of activity, size, economic performance and internationalization strategy implemented by the NEI (2005-2009.The results identified three groups of NIS: export, import and export-import. The group of companies that makeup the largest importers and are associated with smaller companies. The exporters appear to be related more to low techsub-sectors while more internationally committed are those with a higher dimension. Regarding the location not detected any evidence of territorial pattern. Finally, among firms internationalized in the time period analyzed, it is also noteworthy that the economic performance of these is higher among importers. This study provides information on why the same country and same industry some companies decide shortly be created to assume certain levels of risk, engaging in operations engaged in foreign markets while others do not. It also participates in the debate on the competitiveness of manufacturing companies.

  5. 15 CFR 1160.3 - Assistance to industrial technology partnerships.

    Science.gov (United States)

    2010-01-01

    ... Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND INNOVATION Promotion of Private Sector Industrial Technology Partnerships § 1160.3 Assistance to industrial...

  6. Using Innovative Technologies for Manufacturing and Evaluating Rocket Engine Hardware

    Science.gov (United States)

    Betts, Erin M.; Hardin, Andy

    2011-01-01

    Many of the manufacturing and evaluation techniques that are currently used for rocket engine component production are traditional methods that have been proven through years of experience and historical precedence. As we enter into a new space age where new launch vehicles are being designed and propulsion systems are being improved upon, it is sometimes necessary to adopt new and innovative techniques for manufacturing and evaluating hardware. With a heavy emphasis on cost reduction and improvements in manufacturing time, manufacturing techniques such as Direct Metal Laser Sintering (DMLS) and white light scanning are being adopted and evaluated for their use on J-2X, with hopes of employing both technologies on a wide variety of future projects. DMLS has the potential to significantly reduce the processing time and cost of engine hardware, while achieving desirable material properties by using a layered powdered metal manufacturing process in order to produce complex part geometries. The white light technique is a non-invasive method that can be used to inspect for geometric feature alignment. Both the DMLS manufacturing method and the white light scanning technique have proven to be viable options for manufacturing and evaluating rocket engine hardware, and further development and use of these techniques is recommended.

  7. ENVIRONMENTAL REGULATIONS AND TECHNOLOGY - THE ELECTROPLATING INDUSTRY

    Science.gov (United States)

    This 44-page Technology Transfer Environmental Regulations and Technology publication is an update of a 1980 EPA publication that has been revised to reflect changes in the EPA regulations, as well as in the pollution control technologies that affect the electroplating industry. ...

  8. The Office of Industrial Technologies technical reports

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The US Department of Energy's Office of Industrial Technologies (OIT) conducts R D activities which focus on the objectives of improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial energy conservation. The Office also conducts programs to reduce waste generation, increase recycling efforts, and improve the use of wastes as process feedstocks. An active program of technology transfer and education supports these activities and encourages adoption of new technologies. To accomplish these objectives OIT cooperates with the private sector to identify its technological needs and to share R D efforts. R D is conducted to the point that a new technology is shown to work and that it can be transferred to the private sector end-users. This bibliography contains information on all scientific and technical reports sponsored by the DOE Industrial Energy Conservation Program during the years 1988--1990.

  9. Use of digital technologies for nasal prosthesis manufacturing.

    Science.gov (United States)

    Palousek, David; Rosicky, Jiri; Koutny, Daniel

    2014-04-01

    Digital technology is becoming more accessible for common use in medical applications; however, their expansion in prosthetic and orthotic laboratories is not large because of the persistent image of difficult applicability to real patients. This article aims to offer real example in the area of human facial prostheses. This article describes the utilization of optical digitization, computational modelling, rapid prototyping, mould fabrication and manufacturing of a nasal silicone prosthesis. This technical note defines the key points of the methodology and aspires to contribute to the introduction of a certified manufacturing procedure. The results show that the used technologies reduce the manufacturing time, reflect patient's requirements and allow the manufacture of high-quality prostheses for missing facial asymmetric parts. The methodology provides a good position for further development issues and is usable for clinical practice. Clinical relevance Utilization of digital technologies in facial prosthesis manufacturing process can be a good contribution for higher patient comfort and higher production efficiency but with higher initial investment and demands for experience with software tools.

  10. Experiences and Trends of Manufacturing Technology of Advanced Nuclear Fuels

    International Nuclear Information System (INIS)

    2012-08-01

    The 'Atoms for Peace' mission initiated in the mid-1950s paved the way for the development and deployment of nuclear fission reactors as a source of heat energy for electricity generation in nuclear power reactors and as a source of neutrons in non-power reactors for research, materials irradiation, and testing and production of radioisotopes. The fuels for nuclear reactors are manufactured from natural uranium (∼99.3% 238 U + ∼0.7% 235 U) and natural thorium (∼100% 232 Th) resources. Currently, most power and research reactors use 235 U, the only fissile isotope found in nature, as fuel. The fertile isotopes 238 U and 232 Th are transmuted in the reactor to human-made 239 Pu and 233 U fissile isotopes, respectively. Likewise, minor actinides (MA) (Np, Am and Cm) and other plutonium isotopes are also formed by a series of neutron capture reactions with 238 U and 235 U. Long term sustainability of nuclear power will depend to a great extent on the efficient, safe and secure utilization of fissile and fertile materials. Light water reactors (LWRs) account for more than 82% of the operating reactors, followed by pressurized heavy water reactors (PHWRs), which constitute ∼10% of reactors. LWRs will continue to dominate the nuclear power market for several decades, as long as economically viable natural uranium resources are available. Currently, the plutonium obtained from spent nuclear fuel is subjected to mono recycling in LWRs as uranium-plutonium mixed oxide (MOX), containing up to 12% PuO 2 , in a very limited way. The reprocessed uranium (RepU) is also re-enriched and recycled in LWRs in a few countries. Unfortunately, the utilization of natural uranium resources in thermal neutron reactors is 2 and MOX fuel technology has matured during the past five decades. These fuels are now being manufactured, used and reprocessed on an industrial scale. Mixed uranium- plutonium monocarbide (MC), mononitride (MN) and U-Pu-Zr alloys are recognized as advanced fuels

  11. Artificial Immune Algorithm for Subtask Industrial Robot Scheduling in Cloud Manufacturing

    Science.gov (United States)

    Suma, T.; Murugesan, R.

    2018-04-01

    The current generation of manufacturing industry requires an intelligent scheduling model to achieve an effective utilization of distributed manufacturing resources, which motivated us to work on an Artificial Immune Algorithm for subtask robot scheduling in cloud manufacturing. This scheduling model enables a collaborative work between the industrial robots in different manufacturing centers. This paper discussed two optimizing objectives which includes minimizing the cost and load balance of industrial robots through scheduling. To solve these scheduling problems, we used the algorithm based on Artificial Immune system. The parameters are simulated with MATLAB and the results compared with the existing algorithms. The result shows better performance than existing.

  12. Regional Capital Inputs in Chinese Industry and Manufacturing, 1978-2003

    NARCIS (Netherlands)

    Wang, Lili; Szirmai, Adam

    2008-01-01

    This paper provides new estimates of capital inputs in the Chinese economy. Estimates are made for the total economy (1953-2003), for the industrial sector (1978-2003) and for the manufacturing sector (1985-2003). The estimates for industry and manufacturing are broken down by thirty regions. The

  13. 41 CFR 101-26.702 - Purchase of products manufactured by the Federal Prison Industries, Inc.

    Science.gov (United States)

    2010-07-01

    ... manufactured by the Federal Prison Industries, Inc. 101-26.702 Section 101-26.702 Public Contracts and Property... Defense § 101-26.702 Purchase of products manufactured by the Federal Prison Industries, Inc. (a) Purchases by executive agencies of prison-made products carried in GSA supply distribution facilities must...

  14. Using Innovative Technologies for Manufacturing Rocket Engine Hardware

    Science.gov (United States)

    Betts, E. M.; Eddleman, D. E.; Reynolds, D. C.; Hardin, N. A.

    2011-01-01

    Many of the manufacturing techniques that are currently used for rocket engine component production are traditional methods that have been proven through years of experience and historical precedence. As the United States enters into the next space age where new launch vehicles are being designed and propulsion systems are being improved upon, it is sometimes necessary to adopt innovative techniques for manufacturing hardware. With a heavy emphasis on cost reduction and improvements in manufacturing time, rapid manufacturing techniques such as Direct Metal Laser Sintering (DMLS) are being adopted and evaluated for their use on NASA s Space Launch System (SLS) upper stage engine, J-2X, with hopes of employing this technology on a wide variety of future projects. DMLS has the potential to significantly reduce the processing time and cost of engine hardware, while achieving desirable material properties by using a layered powder metal manufacturing process in order to produce complex part geometries. Marshall Space Flight Center (MSFC) has recently hot-fire tested a J-2X gas generator (GG) discharge duct that was manufactured using DMLS. The duct was inspected and proof tested prior to the hot-fire test. Using a workhorse gas generator (WHGG) test fixture at MSFC's East Test Area, the duct was subjected to extreme J-2X hot gas environments during 7 tests for a total of 537 seconds of hot-fire time. The duct underwent extensive post-test evaluation and showed no signs of degradation. DMLS manufacturing has proven to be a viable option for manufacturing rocket engine hardware, and further development and use of this manufacturing method is recommended.

  15. Copper Disk Manufactured at the Space Optics Manufacturing and Technology Center

    Science.gov (United States)

    2001-01-01

    This photograph shows Wes Brown, Marshall Space Flight Center's (MSFC's) lead diamond tuner, an expert in the science of using diamond-tipped tools to cut metal, inspecting the mold's physical characteristics to ensure the uniformity of its more than 6,000 grooves. This king-size copper disk, manufactured at the Space Optics Manufacturing and Technology Center (SOMTC) at MSFC, is a special mold for making high resolution monitor screens. This master mold will be used to make several other molds, each capable of forming hundreds of screens that have a type of lens called a fresnel lens. Weighing much less than conventional optics, fresnel lenses have multiple concentric grooves, each formed to a precise angle, that together create the curvature needed to focus and project images. The MSFC leads NASA's space optics manufacturing technology development as a technology leader for diamond turning. The machine used to manufacture this mold is among many one-of-a-kind pieces of equipment of MSFC's SOMTC.

  16. Agent Technology in Agile Multiparallel Manufacturing and Product Support

    NARCIS (Netherlands)

    van Moergestel, L.J.M.

    2014-01-01

    The thesis describes the application of agent technology in product manufacturing and product support. Important issues in the requirements of modern production are short time to market, requirement-driven production and low cost small quantity production. To meet these requirements special low cost

  17. Agile manufacturing and technology transfer to industrialising countries

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Boer, S.J.

    2003-01-01

    One of the requirements of agile manufacturing, the necessity to gain flexibility, can be reached by using a supplier network. A possible way to develop a supplier network is by subcontracting to parties in industrialising countries. In most cases, it is necessary to transfer technology. The

  18. Additive manufacturing technology in spare parts supply chain

    DEFF Research Database (Denmark)

    Li, Yao; Jia, Guozhu; Yang, Cheng

    2017-01-01

    Additive Manufacturing (AM) technology has the potential to significantly improve supply chain dynamics. The purpose of this paper is to investigate the impact of AM on spare parts supply chain. Three supply chain scenarios are investigated in this paper, namely conventional supply chain...

  19. Continuous manufacturing of active pharmaceutical ingredients via flow technology

    NARCIS (Netherlands)

    Borukhova, S.; Hessel, V.; Kleinbudde, P.; Khinast, J.; Rantanen, J.

    2017-01-01

    The main drivers to implement continuous manufacturing are aspects related to logistics, quality of the final product, chemistry to be implemented, process and safety concerns. Flow technology offers a platform to realize those drivers. This chapter introduces the reader to a relatively new

  20. "Industrie 4.0" and Smart Manufacturing – A Review of Research Issues and Application Examples

    OpenAIRE

    Klaus-Dieter Thoben; Stefan Wiesner; Thorsten Wuest

    2017-01-01

    A fourth industrial revolution is occurring in global manufacturing. It is based on the introduction of Internet of things and servitization concepts into manufacturing companies, leading to vertically and horizontally integrated production systems. The resulting smart factories are able to fulfill dynamic customer demands with high variability in small lot sizes while integrating human ingenuity and automation. To support the manufacturing industry in this conversion process and enhance glob...

  1. An integrated approach for developing a technology strategy framework for small- to medium-sized furniture manufacturers to improve competitiveness

    Directory of Open Access Journals (Sweden)

    Lourens, A.S.

    2013-05-01

    Full Text Available Low-technology firms, such as those found within the furniture manufacturing industry, have no framework or methodology to guide them successfully to acquire and integrate technology that enables them to operate more competitively. The aim of this article is to illustrate the development of a technology strategy framework for small- to medium-sized furniture manufacturers to assist them to improve their competitiveness. More specifically, this article presents an integrated technology strategy framework that enables management to integrate their business strategy with their technology requirements successfully, thus improving competitiveness.

  2. Enabling technologies for industrial energy demand management

    International Nuclear Information System (INIS)

    Dyer, Caroline H.; Hammond, Geoffrey P.; Jones, Craig I.; McKenna, Russell C.

    2008-01-01

    This state-of-science review sets out to provide an indicative assessment of enabling technologies for reducing UK industrial energy demand and carbon emissions to 2050. In the short term, i.e. the period that will rely on current or existing technologies, the road map and priorities are clear. A variety of available technologies will lead to energy demand reduction in industrial processes, boiler operation, compressed air usage, electric motor efficiency, heating and lighting, and ancillary uses such as transport. The prospects for the commercial exploitation of innovative technologies by the middle of the 21st century are more speculative. Emphasis is therefore placed on the range of technology assessment methods that are likely to provide policy makers with a guide to progress in the development of high-temperature processes, improved materials, process integration and intensification, and improved industrial process control and monitoring. Key among the appraisal methods applicable to the energy sector is thermodynamic analysis, making use of energy, exergy and 'exergoeconomic' techniques. Technical and economic barriers will limit the improvement potential to perhaps a 30% cut in industrial energy use, which would make a significant contribution to reducing energy demand and carbon emissions in UK industry. Non-technological drivers for, and barriers to, the take-up of innovative, low-carbon energy technologies for industry are also outlined

  3. Energy management technologies: special focus on textile industry

    International Nuclear Information System (INIS)

    Dayo, F.B.O.

    2000-08-01

    requirement in international competitiveness. The focus of this paper is the review of energy management technologies that can be used to achieve energy efficiency improvement objectives in textile manufacturing. The paper is arranged as follows: in section 2, the characteristics of energy consumption in textile manufacturing are presented; energy efficiency improvement technology options for the textile industry are discussed in section 3, section 4 covers a discussion of process specific technologies for improving energy use efficiency in textile manufacturing; the paper is concluded in section 5 with salient recommendation for promoting rational use of energy in the Nigerian Textile Industrial Sector

  4. 2008 Industrial Technologies Market Report, May 2009

    Energy Technology Data Exchange (ETDEWEB)

    Energetics; DOE

    2009-07-01

    The industrial sector is a critical component of the U.S. economy, providing an array of consumer, transportation, and national defense-related goods we rely on every day. Unlike many other economic sectors, however, the industrial sector must compete globally for raw materials, production, and sales. Though our homes, stores, hospitals, and vehicles are located within our borders, elements of our goods-producing industries could potentially be moved offshore. Keeping U.S. industry competitive is essential to maintaining and growing the U.S. economy. This report begins with an overview of trends in industrial sector energy use. The next section of the report focuses on some of the largest and most energy-intensive industrial subsectors. The report also highlights several emerging technologies that could transform key segments of industry. Finally, the report presents policies, incentives, and drivers that can influence the competitiveness of U.S. industrial firms.

  5. Fifteenth National Industrial Energy Technology Conference: Proceedings

    International Nuclear Information System (INIS)

    1993-01-01

    This year's conference, as in the past, allows upper-level energy managers, plant engineers, utility representatives, suppliers, and industrial consultants to present and discuss novel and innovative ideas on how to reduce costs effectively and improve utilization of resources. Papers are presented on topics that include: Win-win strategies for stability and growth and future success, new generation resources and transmission issues, industry and utilities working together, paper industry innovations, improving energy efficiency, industrial customers and electric utilities regulations, industrial electro technologies for energy conservation and environmental improvement, advances in motors and machinery, industrial energy audits, industrial energy auditing, process improvements, case studies of energy losses, and industrial heat pump applications. Individual papers are indexed separately

  6. Technological trends in energy industry

    International Nuclear Information System (INIS)

    Martin Moyano, R.

    1995-01-01

    According to the usual meaning, technological trends are determined by main companies and leading countries with capacity for the development and marketing of technology. Presently, those trends are addressed to: the development of cleaner and more efficient process for fossil fuels utilization (atmospheric and pressurized fluidized beds, integrated gasification in combined cycle, advanced combined cycles, etc), the development of safer and more economic nuclear reactors; the efficiency increase in both generation and utilisation of energy, including demand side management and distribution automation; and the reduction of cost of renewable energies. Singular points of these trends are: the progress in communication technologies (optical fibre, trucking systems, etc.); the fuel cells; the supercritical boilers; the passive reactors; the nuclear fusion; the superconductivity; etc. Spain belongs to the developed countries but suffer of certain technology shortages that places it in a special situation. (Author)

  7. Ramp Technology and Intelligent Processing in Small Manufacturing

    Science.gov (United States)

    Rentz, Richard E.

    1992-01-01

    To address the issues of excessive inventories and increasing procurement lead times, the Navy is actively pursuing flexible computer integrated manufacturing (FCIM) technologies, integrated by communication networks to respond rapidly to its requirements for parts. The Rapid Acquisition of Manufactured Parts (RAMP) program, initiated in 1986, is an integral part of this effort. The RAMP program's goal is to reduce the current average production lead times experienced by the Navy's inventory control points by a factor of 90 percent. The manufacturing engineering component of the RAMP architecture utilizes an intelligent processing technology built around a knowledge-based shell provided by ICAD, Inc. Rules and data bases in the software simulate an expert manufacturing planner's knowledge of shop processes and equipment. This expert system can use Product Data Exchange using STEP (PDES) data to determine what features the required part has, what material is required to manufacture it, what machines and tools are needed, and how the part should be held (fixtured) for machining, among other factors. The program's rule base then indicates, for example, how to make each feature, in what order to make it, and to which machines on the shop floor the part should be routed for processing. This information becomes part of the shop work order. The process planning function under RAMP greatly reduces the time and effort required to complete a process plan. Since the PDES file that drives the intelligent processing is 100 percent complete and accurate to start with, the potential for costly errors is greatly diminished.

  8. Manufacturing technologies for direct methanol fuel cells (DMFCs)

    Energy Technology Data Exchange (ETDEWEB)

    Gluesen, Andreas; Mueller, Martin; Kimiaie, Nicola; Konradi, Irene; Mergel, Juergen; Stolten, Detlef [Forschungszentrum Juelich (Germany). Inst. of Energy Research - IEF-3: Fuel Cells

    2010-07-01

    Fuel cell research is focussing on increasing power density and lifetime and reducing costs of the whole fuel cell system. In order to reach these aims, it is necessary to develop appropriately designed components outgoing from high quality materials, a suitable manufacturing process and a well balanced system. To make use of the advantages that can be obtained by developing production technology, we are mainly improving the coating and assembling techniques for polymer electrolyte fuel cells, especially Direct Methanol Fuel Cells (DMFCs). Coating is used for making fuel cell electrodes as well as highly conductive contacts. Assembling is used to join larger components like membrane electrode assemblies (MEAs) and bipolar units consisting of flow fields and the separator plate, as well as entire stacks. On the one hand a reproducible manufacturing process is required to study fine differences in fuel cell performance affected by new materials or new designs. On the other hand a change in each parameter of the manufacturing process itself can change product properties and therefore affect fuel cell performance. As a result, gas diffusion electrodes (GDEs) are now produced automatically in square-meter batches, the hot-pressing of MEAs is a fully automated process and by pre-assembling the number of parts that have to be assembled in a stack was reduced by a factor of 10. These achievements make DMFC manufacturing more reproducible and less error-prone. All these and further developments of manufacturing technology are necessary to make DMFCs ready for the market. (orig.)

  9. Emerging energy-efficient industrial technologies

    Energy Technology Data Exchange (ETDEWEB)

    Martin, N.; Worrell, E.; Ruth, M.; Price, L.; Elliott, R.N.; Shipley, A.M.; Thorne, J.

    2000-10-01

    U.S. industry consumes approximately 37 percent of the nation's energy to produce 24 percent of the nation's GDP. Increasingly, industry is confronted with the challenge of moving toward a cleaner, more sustainable path of production and consumption, while increasing global competitiveness. Technology will be essential for meeting these challenges. At some point, businesses are faced with investment in new capital stock. At this decision point, new and emerging technologies compete for capital investment alongside more established or mature technologies. Understanding the dynamics of the decision-making process is important to perceive what drives technology change and the overall effect on industrial energy use. The assessment of emerging energy-efficient industrial technologies can be useful for: (1) identifying R&D projects; (2) identifying potential technologies for market transformation activities; (3) providing common information on technologies to a broad audience of policy-makers; and (4) offering new insights into technology development and energy efficiency potentials. With the support of PG&E Co., NYSERDA, DOE, EPA, NEEA, and the Iowa Energy Center, staff from LBNL and ACEEE produced this assessment of emerging energy-efficient industrial technologies. The goal was to collect information on a broad array of potentially significant emerging energy-efficient industrial technologies and carefully characterize a sub-group of approximately 50 key technologies. Our use of the term ''emerging'' denotes technologies that are both pre-commercial but near commercialization, and technologies that have already entered the market but have less than 5 percent of current market share. We also have chosen technologies that are energy-efficient (i.e., use less energy than existing technologies and practices to produce the same product), and may have additional ''non-energy benefits.'' These benefits are as important (if

  10. Greenhouse gas options, policy and measures for the Canadian Transportation Equipment Manufacturing Industry - Final report

    International Nuclear Information System (INIS)

    2000-02-01

    This report summarizes and analyses the work that have been carried out by the Transportation Equipment Manufacturing Sector (TEMS) Working Group of the National Climate Change Industry Table over the last 14 months, and presents the Group's view of appropriate policies for greenhouse gas emission reduction in Canada. To develop its approach, the Working Group conducted five separate studies which are included in this report as annexes. Annex A is a Foundation Paper, which provides an overview of the sector's performance vis-a-vis energy use and greenhouse gas production. Annex B analyzes the competitive position of the industry by reviewing growth trends in each of the industry sub-sectors and the key factors in maintaining and enhancing the sector's international competitive position. Annex C is a technology assessment. It provides an overview of the uptake of energy saving technology in the sector. Annex D provides a facility level analysis focusing on energy use in the automotive parts manufacturing sector. Annex E is a review of American policies on climate change, summarizing the approach currently being taken towards greenhouse gas emission reduction in the United States. Some of the key findings of this report are: (1) business-as-usual emissions will greatly exceed the implicit Kyoto target of six per cent reduction from 1990 levels, (2) relatively few opportunities exist for major emissions reductions through the use of existing technology, (3) sector-specific policies appear to be ill-advised, but cross-cutting policies provide good opportunities for the transportation equipment manufacturing sector to do its part in helping Canada meeting its Kyoto commitment. The report recommends investigation of barriers to adoption of new technologies and examination of market imperfections, promotion of cogeneration where it makes economic sense, and consideration of the use of flexible instruments such as carbon taxes and tradable emission permits. Overall, the

  11. Designing Integrated Product- Service System Solutions in Manufacturing Industries

    DEFF Research Database (Denmark)

    Costa, Nina; Patrício, Lia; Morelli, Nicola

    2015-01-01

    Manufacturing firms are increasingly evolving towards the design of integrated product-service solutions but servitization literature does not provide specific guidance on how to design these integrated solutions. Building upon ProductService System (PSS) and Service Design (SD) approaches...... how it brings new insights to manufacturing companies moving to a service, value cocreation perspective....

  12. Are the determinants of markup size industry-specific? The case of Slovenian manufacturing firms

    Directory of Open Access Journals (Sweden)

    Ponikvar Nina

    2011-01-01

    Full Text Available The aim of this paper is to identify factors that affect the pricing policy in Slovenian manufacturing firms in terms of the markup size and, most of all, to explicitly account for the possibility of differences in pricing procedures among manufacturing industries. Accordingly, the analysis of the dynamic panel is carried out on an industry-by-industry basis, allowing the coefficients on the markup determinants to vary across industries. We find that the oligopoly theory of markup determination for the most part holds for the manufacturing sector as a whole, although large variability in markup determinants exists across industries within the Slovenian manufacturing. Our main conclusion is that each industry should be investigated separately in detail in order to assess the precise role of markup factors in the markup-determination process.

  13. Advanced Manufacturing Technology Adoption In SMEs: An Integrative Model

    Directory of Open Access Journals (Sweden)

    Mirmahdi Darbanhosseiniamirkhiz

    2012-12-01

    Full Text Available The objective of this study is to assess the critical factors which influence adoption of  Advanced Manufacturing Technologies (AMTs and identify hurdles and barriers which prevent small- and medium-sized enterprises (SMEs from accomplishing the desired goals of AMTs utilization. The proposed framework has synthesized previous studies and integrated related studies through conducting a comprehensive literature review. This paper is a theoretical construction that synthesizes previous studies, and centers on three context (Environmental, Organizational, and Technological which influence  adoption of AMTs. This model can provide managers with practical solutions through granting in-depth understanding of whole internal, external, and technological environments, and awarding empirical insight into overcoming barriers to the adoption and implementation of AMT and other process innovations in manufacturing organizations.

  14. Manufacturing technology development for vacuum vessel and plasma facing components

    International Nuclear Information System (INIS)

    Laitinen, Arttu; Liimatainen, Jari; Hallila, Pentti

    2005-01-01

    Vacuum vessel and plasma facing components of the ITER construction including shield modules and primary first wall panels have great impact on the production costs and reliability of the installation. From the manufacturing technology point of view, accuracy of shape, properties of the various austenitic stainless steel/austenitic stainless steel interfaces or CuCrZr/austenitic stainless steel interfaces as well as those of the base materials are crucial for technical reliability of the construction. The current approach in plasma facing components has been utilisation of solid-HIP technology and solid-powder-HIP technology. Due to the large size of especially shield modules shape, control of the internal cavities and cooling channels is extremely demanding. This requires strict control of the raw materials and manufacturing parameters

  15. Simulating The Technological Movements Of The Equipment Used For Manufacturing Prosthetic Devices Using 3D Models

    Science.gov (United States)

    Chicea, Anca-Lucia

    2015-09-01

    The paper presents the process of building geometric and kinematic models of a technological equipment used in the process of manufacturing devices. First, the process of building the model for a six axes industrial robot is presented. In the second part of the paper, the process of building the model for a five-axis CNC milling machining center is also shown. Both models can be used for accurate cutting processes simulation of complex parts, such as prosthetic devices.

  16. The Near-Term Impacts of Carbon Mitigation Policies on Manufacturing Industries

    OpenAIRE

    Morgenstern, Richard; Shih, Jhih-Shyang; Ho, Mun; Zhang, Xuehua

    2002-01-01

    Who will pay for new policies to reduce carbon dioxide and other greenhouse gas emissions in the United States? This paper considers a slice of the question by examining the near-term impact on domestic manufacturing industries of both upstream (economy-wide) and downstream (electric power industry only) carbon mitigation policies. Detailed Census data on the electricity use of four-digit manufacturing industries is combined with input-output information on interindustry purchases to paint a ...

  17. Industrial waste management within manufacturing: a comparative study of tools, policies, visions and concepts

    OpenAIRE

    Shahbazi, Sasha; Kurdve, Martin; Bjelkemyr, Marcus; Jönsson, Christina; Wiktorsson, Magnus

    2013-01-01

    Industrial waste is a key factor when assessing the sustainability of a manufacturing process or company. A multitude of visions, concepts, tools, and policies are used both academically and industrially to improve the environmental effect of manufacturing; a majority of these approaches have a direct bearing on industrial waste. The identified approaches have in this paper been categorised according to application area, goals, organisational entity, life cycle phase, and waste hierarchy stag...

  18. STATUS OF LEAN MANUFACTURING IMPLEMENTATION ON SECONDARY WOOD INDUSTRIES INCLUDING RESIDENTIAL, CABINET, MILLWORK, AND PANEL MARKETS

    OpenAIRE

    Adrian Pirraglia; Daniel Saloni; Herman van Dyk

    2009-01-01

    Lean Manufacturing has helped several industries to achieve operational and manufacturing excellence by increasing productivity and enhancing quality, while reducing waste and costs. However, the wood industry has been historically slow in adopting this philosophy and its many tools. In times when overseas competition has taken big portions of the traditional market share for U.S based wood industries, it has become important that companies start to take actions in order to regain competitive...

  19. Liposome Technology for Industrial Purposes

    Directory of Open Access Journals (Sweden)

    Andreas Wagner

    2011-01-01

    Full Text Available Liposomes, spherical vesicles consisting of one or more phospholipid bilayers, were first described in the mid 60s by Bangham and coworkers. Since then, liposomes have made their way to the market. Today, numerous lab scale but only a few large-scale techniques are available. However, a lot of these methods have serious limitations in terms of entrapment of sensitive molecules due to their exposure to mechanical and/or chemical stress. This paper summarizes exclusively scalable techniques and focuses on strengths, respectively, limitations in respect to industrial applicability. An additional point of view was taken to regulatory requirements concerning liposomal drug formulations based on FDA and EMEA documents.

  20. Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Industry

    OpenAIRE

    Lidia Martínez Murillo

    2007-01-01

    Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its char...

  1. Implementation of 5S in Manufacturing Industry: A Case of Foreign Workers in Melaka

    Directory of Open Access Journals (Sweden)

    Chee Houa San

    2018-01-01

    Full Text Available Lean manufacturing system has been infiltrated in manufacturing sectors across the world. In fact, Lean manufacturing system is a practice which regards the use of the resources, creation of value for the end customers, and as the ways to eliminate the waste. There are several tools that can be used to eliminate the waste within the industry. This research is a study of the implementation of 5S in manufacturing industry. Despite this, the research study focused on manufacturing industry, which has been implemented 5S system in Melaka State. Although there are number of tools and technique available to help in improving the manufacturing process, however, there is only few industries could implement the tools successfully. In this research, foreign workers play a main role in implement the 5S systems as the manufacturing industry in Malaysia adopt large amount of foreign workers to work as employees. Therefore, it is important to ensure the foreign workers truly understand the concept of 5S system and adopt the best ways to implement it in order to have better performance. This research study has been proposed by the research model of the barriers to implementation of 5S in manufacturing industry among foreign workers. A several research method has been adopted to do the research, such as descriptive research design with quantitative methods, survey questionnaire and cross-sectional studies.

  2. Information Technology and the Third Industrial Revolution.

    Science.gov (United States)

    Fitzsimmons, Joe

    1994-01-01

    Discusses the so-called third industrial revolution, or the information revolution. Topics addressed include the progression of the revolution in the U.S. economy, in Europe, and in Third World countries; the empowering technologies, including digital switches, optical fiber, semiconductors, CD-ROM, networks, and combining technologies; and future…

  3. Development of granular powder manufacturing technology by spray pyrolysis

    International Nuclear Information System (INIS)

    Katoh, Yoshiyuki; Kawase, Keiichi; Takahashi, Yoshiharu; Todokoro, Akio

    1996-01-01

    For shortening of mixed-oxide (MOX) fuel manufacturing process and improvement in treatment of MOX-powder, we have been developing the granular powder production technology. Since the granular powders have excellent fluidity owing to the spherical shape, there is the possibility of modifying scattering and adcering of the powder in the process equipment. In this paper, spray pyrolysis process in adopted as the process of manufacturing the granular powders and the basic feasibility study has been carried out. The experimental results show that the manufactured granular powders have excellent fluidity and the diameter of the powders is controllable. Furthermore, high density pellets are formed by sintering the powders. Thus, it is clarified that this process is promising for the actual MOX fuel fabrication. (author)

  4. Studies on treatment and manufacturing of industrial materials

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seung Woong; Kim, Chi Kwon; Hwang, Seon Kook [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1995-12-01

    For the technical development on utilization of domestic unused resources, the study on the production and the process of industrial raw materials was carried out. This study is divided into five articles and their main results are summarized as follows. 1. The utilization of chromic oxide wastes: This study was carried out to develop the optimum process for recovering precious and valuable metals from chrome oxide wastes. The following subjects such as, feasibility on the recovery of precious and valuable metals, recovery rate of precious and valuable metals, purification of extracted precious and valuable metals, and environmental aspects of recovery process, were investigated. 2. The production of ultramarine from nonmetal minerals: The aims were the determination of the optimum conditions of calcination of raw materials and the investigation of the synthesis mechanism of ultramarine green and blue. 3. The synthesis in fine calcium carbonate powder and it`s characteristics: The transformation process of amorphous CaCO{sub 3} obtained from the reaction between aqueous solution of Ca(OH){sub 2} and CO{sub 2} at 10, 15, 20 and 25 degree was traced continuously by measuring the electrical conductivity of the reaction solution and the influences of reaction temperature, electrical conductivity value of the reaction solution on the products after transformation were examined by x-ray powder diffraction and electron microscopy. 4. Mineral processing technology for abrasive minerals: Buyeo Materials in Buyeogun, Choongnam province is a company producing feldspar concentrate, but does not yet utilize the garnet as abrasive material and other useful heavy minerals wasted out from the process of feldspar ore. This aimed to develop technology and process for the recovery of garnet concentrate. 5. Synthesis of nitride material by plasma method: DC plasma torch which is a non-transferred type was constructed and silicon nitride powders were produced. (Abstract Truncated)

  5. Towards a quantum information technology industry

    International Nuclear Information System (INIS)

    Spiller, T P; Munro, W J

    2006-01-01

    The research fields of quantum information processing and communication are now well established, although still growing and developing. It was realized early on that there is significant potential for new technologies and applications, leading to the vision of a whole new quantum information technology industry. The vision is not yet reality, and there are many open questions with regard to how it might become so. This article raises some of these questions, and gives a viewpoint on how we might proceed, from where we are today towards a quantum information technology industry in the future. (viewpoint)

  6. The implementation of Supply Chain Collaboration in China: Manufacturing Industries

    OpenAIRE

    HAN, CHE

    2011-01-01

    As we know that supply chain management is important to a manufacturing company and Chinese manufacturing companies have great contribution to the world. Unfortunately, Chinese companies still use traditional supply chain to operate, and it will not help companies to improve their performance and save costs. In this way, the topic of this dissertation is investigating one of the modern supply chain management strategies which is supply chain collaboration. In addition, the supplier developmen...

  7. Application of virtual surgical planning with computer assisted design and manufacturing technology to cranio-maxillofacial surgery.

    Science.gov (United States)

    Zhao, Linping; Patel, Pravin K; Cohen, Mimis

    2012-07-01

    Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical planning (VSP) technology, to craniomaxillofacial reconstruction has been gaining increasing attention to reconstructive surgeons. This article illustrates the components, system and clinical management of the VSP and CAD/CAM technology including: data acquisition, virtual surgical and treatment planning, individual implant design and fabrication, and outcome assessment. It focuses primarily on the technical aspects of the VSP and CAD/CAM system to improve the predictability of the planning and outcome.

  8. Small Scale Turbopump Manufacturing Technology and Material Processes

    Science.gov (United States)

    Alvarez, Erika; Morgan, Kristin; Wells, Doug; Zimmerman, Frank

    2011-01-01

    As part of an internal research and development project, NASA Marshall Space Flight Center (MSFC) has been developing a high specific impulse 9,000-lbf LOX/LH2 pump-fed engine testbed with the capability to throttle 10:1. A Fuel Turbopump (FTP) with the ability to operate across a speed range of 30,000-rpm to 100,000-rpm was developed and analyzed. This small size and flight-like Fuel Turbopump has completed the design and analysis phase and is currently in the manufacturing phase. This paper highlights the manufacturing and processes efforts to fabricate an approximately 20-lb turbopump with small flow passages, intricately bladed components and approximately 3-in diameter impellers. As a result of the small scale and tight tolerances of the hardware on this turbopump, several unique manufacturing and material challenges were encountered. Some of the technologies highlighted in this paper include the use of powder metallurgy technology to manufacture small impellers, electron beam welding of a turbine blisk shroud, and casting challenges. The use of risk reduction efforts such as non-destructive testing (NDT) and evaluation (NDE), fractography, material testing, and component spin testing are also discussed in this paper.

  9. Manufacturing and joining technologies for helium cooled divertors

    International Nuclear Information System (INIS)

    Aktaa, J.; Basuki, W.W.; Weber, T.; Norajitra, P.; Krauss, W.; Konys, J.

    2014-01-01

    Highlights: • The manufacturing and joining technologies developed at KIT for helium cooled divertors are reviewed and critically discussed. • Various technologies have been pursued and further developed aiming divertor components with very high quality and sufficient reliability. • Very promising routes have been found for which however still R and D works are necessary. • Technologies developed are also useful for other divertor and even blanket concepts, particularly those with tungsten armor. - Abstract: In the helium cooled (HC) divertor, developed at KIT for a fusion power plant, tungsten has been selected as armor as well as structural material due to its crucial properties: high melting point, very low sputtering yield, good thermal conductivity, high temperature strength, low thermal expansion and low activation. Thereby the armor tungsten is attached to the structural tungsten by thermally conductive joint. Due to the brittleness of tungsten at low temperatures its use as structural material is limited to the high temperature part of the component and a structural joint to the reduced activation ferritic martensitic steel EUROFER97 is foreseen. Hence, to realize the selected hybrid material concept reliable tungsten–steel and tungsten–tungsten joints have been developed and will be reported in this paper. In addition, the modular design of the HC divertor requires tungsten armor tiles and tungsten structural thimbles to be manufactured in high numbers with very high quality. Due to the high strength and low temperature brittleness of tungsten special manufacturing techniques need to be developed for the production of parts with no cavities inside and/or surface flaws. The main achievement in developing the respective manufacturing technologies will be presented and discussed. To achieve the objectives mentioned above various manufacturing and joining technologies are pursued. Their later applicability depends on the level of development

  10. Emerging energy-efficient technologies for industry

    International Nuclear Information System (INIS)

    Worrell, Ernst; Martin, Nathan; Price, Lynn; Ruth, Michael; Elliott, Neal; Shipley, Anna; Thorn, Jennifer

    2001-01-01

    For this study, we identified about 175 emerging energy-efficient technologies in industry, of which we characterized 54 in detail. While many profiles of individual emerging technologies are available, few reports have attempted to impose a standardized approach to the evaluation of the technologies. This study provides a way to review technologies in an independent manner, based on information on energy savings, economic, non-energy benefits, major market barriers, likelihood of success, and suggested next steps to accelerate deployment of each of the analyzed technologies. There are many interesting lessons to be learned from further investigation of technologies identified in our preliminary screening analysis. The detailed assessments of the 54 technologies are useful to evaluate claims made by developers, as well as to evaluate market potentials for the United States or specific regions. In this report we show that many new technologies are ready to enter the market place, or are currently under development, demonstrating that the United States is not running out of technologies to improve energy efficiency and economic and environmental performance, and will not run out in the future. The study shows that many of the technologies have important non-energy benefits, ranging from reduced environmental impact to improved productivity. Several technologies have reduced capital costs compared to the current technology used by those industries. Non-energy benefits such as these are frequently a motivating factor in bringing technologies such as these to market. Further evaluation of the profiled technologies is still needed. In particular, further quantifying the non-energy benefits based on the experience from technology users in the field is important. Interactive effects and inter-technology competition have not been accounted for and ideally should be included in any type of integrated technology scenario, for it may help to better evaluate market

  11. Understanding industrial energy use: Physical energy intensity changes in Indian manufacturing sector

    International Nuclear Information System (INIS)

    Sudhakara Reddy, B.; Kumar Ray, Binay

    2011-01-01

    This study develops and examines physical energy intensity indicators in five industrial sub-sectors-iron and steel, aluminum, textiles, paper, and cement-and investigates mitigation options for energy related CO 2 emissions (during 1991-2005). Decomposition analysis has been employed to separate the structural effect (share of different products in the sector) from pure intensity effect (efficiency increase through technical improvement) for each industry. The results show that the combined effect (considering both structural and intensity effects together) on both iron and steel and paper and pulp industries is negative while it is positive for aluminum and textiles. The intensity effect for all the industries, barring textiles, is negative showing improvement in energy efficiency; iron and steel in particular, has seen a decrease of 134 PJ in energy consumption owing to improvements in efficiency. However, energy intensity in textiles has risen by 47 PJ due to increased mechanization. Structural effect is positive in aluminum and iron and steel industries indicating a movement towards higher energy-intensive products. In the case of aluminum, positive structural effect dominates over negative intensive effect whereas negative intensive effect dominates iron and steel industry. The paper helps in designing policies for improving productivity and reduce energy consumption in India's manufacturing sector. - Highlights: → The study develops physical energy intensity indicators in industrial sub-sectors of India. → It identifies technological and other options for reduction in energy consumption. → The study quantifies savings in energy as well as CO 2 emissions. → The indicators are useful in examining structural changes.

  12. Industrial engineering studies for the manufacture of the ITER PF coils

    International Nuclear Information System (INIS)

    Libeyre, P.; Decool, P.; Guerin, O.; Perrella, M.; Bourquard, A.

    2007-01-01

    Industrial studies have been carried out in Europe to prepare the manufacture of the five poloidal field (PF) coils, which will be manufactured on the ITER site. A first study, carried out by Ansaldo Superconduttori, addressed the manufacturing sequence, assuming the manufacture of the PF coils inside the two buildings which will further host the cryogenic system. A second study, carried out by Alstom investigated how to achieve the manufacture of some crucial points. A new layout of the manufacturing line was proposed, aiming at manufacture of the PF2-6 coils within 36 months. A recent study performed by Alstom, assumes the manufacture of the PF coils in a single dedicated building, releasing so the constraint of meeting the deadline fixed in ITER reference scheme by the starting point of installation of the cryogenic components

  13. Renewable energy technologies and the European industry

    International Nuclear Information System (INIS)

    Whiteley, M.; Bess, M.

    2000-01-01

    The European renewable energy industry has the potential to be a world leader. This has been achieved within the European region for specific technologies, through a set of policy activities at a national and regional level, driven primarily by employment, energy self-sufficiency and industrial competitiveness. Using the experience gained in recent years, European industry has the opportunity to continue to expand its horizons on a worldwide level. Through the use of the SAFIRE rational energy model, an assessment has been made of the future penetration of renewable energy within Europe and the effects on these socio-economic factors. In conjunction with these outputs, assessments of the worldwide markets for wind, photovoltaics, solar thermal plant and biomass have been assessed. A case study of the Danish wind industry is used as a prime example of a success story from which the learning opportunities are replicated to other industries, so that the European renewable energy industry can achieve its potential. (orig.)

  14. Energy efficiency solutions for driers used in the glass manufacturing and processing industry

    Directory of Open Access Journals (Sweden)

    Pătrașcu Roxana

    2017-07-01

    Full Text Available Energy conservation is relevant to increasing efficiency in energy projects, by saving energy, by its’ rational use or by switching to other forms of energy. The goal is to secure energy supply on short and long term, while increasing efficiency. These are enforced by evaluating the companies’ energy status, by monitoring and adjusting energy consumption and organising a coherent energy management. The manufacturing process is described, starting from the state and properties of the raw material and ending with the glass drying technological processes involved. Raw materials are selected considering technological and economic criteria. Manufacturing is treated as a two-stage process, consisting of the logistic, preparation aspect of unloading, transporting, storing materials and the manufacturing process itself, by which the glass is sifted, shredded, deferrized and dried. The interest of analyzing the latter is justified by the fact that it has a big impact on the final energy consumption values, hence, in order to improve the general performance, the driers’ energy losses are to be reduced. Technological, energy and management solutions are stated to meet this problem. In the present paper, the emphasis is on the energy perspective of enhancing the overall efficiency. The case study stresses the effects of heat recovery over the efficiency of a glass drier. Audits are conducted, both before and after its’ implementation, to punctually observe the balance between the entering and exiting heat in the drying process. The reduction in fuel consumption and the increase in thermal performance and fuel usage performances reveal the importance of using all available exiting heat from processes. Technical faults, either in exploitation or in management, lead to additional expenses. Improving them is in congruence with the energy conservation concept and is in accordance with the Energy Efficiency Improvement Program for industrial facilities.

  15. Factors that Influence the Dissemination of Knowledge in Technology Transfer among Malaysian Manufacturing Employees

    Directory of Open Access Journals (Sweden)

    Mughaneswari ap Sahadevan

    2014-04-01

    Full Text Available The meaning of technology transfer is so wide but mostly involving some form of technology-re- lated exchange. However, in this particular paper, technology transfer is consider as a concept to examine the process of disseminating knowledge and skills that a person owned to another per- son in order to generate higher productivity with new approach of producing a particular prod- uct or service. Although, many researchers have explored the evolution of technology transfer, nonetheless some drivers are yet to be explored in a Malaysian manufacturing industry. This study, therefore attempts to determine the relationship between absorptive capacity, transfer capacity, communication motivation and learning intent and technology transfer performance. A survey methodology was used in a Japanese multinational company based in Klang Valley, Malaysia. A total of 117 questionnaires were received. Results show that absorptive capacity is the most signifi- cant to influence technology transfer performance.

  16. 10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

  17. China's Industrial Policy in Relation to Electronics Manufacturing

    Institute of Scientific and Technical Information of China (English)

    Zhongxiu Zhao; Xiaoling Huang; Dongya Ye; Paul Gentle

    2007-01-01

    China has become the biggest exporter of electronic products in the world. Government policy intervention has contributed significantly to the rapid expansion of the electronics industry. The present paper examines the evolutionary development of industrial policies related to the electronics industry in China and the impacts of such policies on the shaping of the industry. In particular, the relationship between foreign funded enterprises and domestic firms are examined in detail. The future trend of the industry is also discussed in the paper, and the policy focus of the Chinese Government is predicted.

  18. Study on the Transformation and Upgrade of E-Commerce Application in Manufacturing Industry

    OpenAIRE

    Zhao Liang; Feng Mengzhao

    2017-01-01

    Under the Internet thinking, manufacturing management mode is changed, it is not depend on the scale, but in the user as the center, more dependent on the reaction rate of user requirements. As the big data, cloud computing, Internet of things technology such as the development of technology, manufacturing is from automatic to intelligent evolution, on the user's personalized customization is possible. Using Internet thinking positive development manufacturing enterprise electronic commerce a...

  19. The Adoption of Additive Manufacturing Technology in Sweden

    OpenAIRE

    Kianian, Babak; Tavassoli, Sam; Larsson, Tobias; Diegel, Olaf

    2015-01-01

    This article analyzes the adoption of additive manufacturing (AM) technologies in Sweden. The data set consists of a recent and representative sample of Swedish AM users (companies, universities, and research institutes). The authors investigate two questions. First, what are the current applications of AM in Sweden (e.g., rapid prototyping [RP], production)? Second, what are the factors that can explain the variation in AM adoption among the users? Using a regression analysis technique, the ...

  20. Manufacture of conical springs with elastic medium technology improvement

    Science.gov (United States)

    Kurguzov, S. A.; Mikhailova, U. V.; Kalugina, O. B.

    2018-01-01

    This article considers the manufacturing technology improvement by using an elastic medium in the stamping tool forming space to improve the conical springs performance characteristics and reduce the costs of their production. Estimation technique of disk spring operational properties is developed by mathematical modeling of the compression process during the operation of a spring. A technique for optimizing the design parameters of a conical spring is developed, which ensures a minimum voltage value when operated in the edge of the spring opening.

  1. Industrial assessment of radiofrequency and microwave radiations: case study at electronic manufacturing industries in Penang

    International Nuclear Information System (INIS)

    Mohd Zaid Abdullah

    1996-01-01

    In electronic manufacturing industry, the applications of an equipment emitting radiofrequency radiation (RFR) are numerous and Increasing. It is known that exposure to RFR at sufficiently high intensity and duration can produce a variety of adverse health effects. This paper presents some results from an extensive studies in the RFR field measurements at frequency range from 100 MHz to 1 GHz. All measurements were performed inside factories located at the Penang Free Trade Zone. In this case, the factories chosen are those that manufacture the electronic components whereby the applications of RFR equipment are likely to be intensive compared to other type of industries. The measurement system used in this study are the portable spectrum-analyzer, the passive log-periodic antenna and a desktop computer for data analysis. Results from this study have indicated that the RFR exposure levels in most factories are in the range of 7.7 x 10 sup -4 - 4.31 x 10 sup -3 Wm sup -2 and 0.01 - 0. 741 Vm sup -1 for power density and electric strength measurement respectively. These ranges are at least 100 times lower compared to the RFR protection guidelines proposed by the American National Standard Institute (ANSI). However, the exposure levels inside the factory are consistently 10 sup -3 - 10 sup -4 higher than the levels caused by natural sources and is about 10 sup 2 - 10 sup 6 higher than the levels measured at a distance of 30 m from a low-power output mobile phone transmitter. In the case of the health effect assessment, no sufficient evidence has been found to indicate the potential consequences resulting from excessive RFR exposure. Nonetheless, many factories surveyed are unaware of the existence of the international guidelines and codes on the safe use of radiofrequency energy even though, some measures are being taken to protect their employees against RFR

  2. PENERAPAN LEAN MANUFACTURING UNTUK MEREDUKSI WASTE DI INDUSTRI SKALA UKM

    Directory of Open Access Journals (Sweden)

    Darminto Pujotomo

    2012-08-01

    Full Text Available Lean Manufacturing merupakan konsep manufaktur untuk menghasilkan produk yang efisien dengan mengurangi biaya produksi melalui efisiensi. Dalam konsep Lean, dikenal 7 macam pemborosan yang meliputi produksi berlebih, transportasi material yang berlebihan, menunggu, proses yang tidak perlu, persediaan, pergerakan dan cacat produk. Penelitian ini menggunakan value stream mapping dalam mengidentifikasi pemborosan dan menelusuri potensi terjadinya pemborosan. Potensi pemborosan yang terjadi akan direduksi dengan menggunakan instrumen yang sesuai berdasarkan indikator terpilih. Penelitian diharapkan dapat menghasilkan proses produksi yang lebih efisiensi sehingga mampu mereduksi biaya produksi. Pada akhirnya akan menghasilkan profit yang lebih besar. Kata kunci : lean manufacturing, value stream mapping, waste   Lean Manufacturing is a manufacturing concepts to produce products that are efficient by reducing production costs through efficiencies. In the Lean concept, known seven kinds of waste, including overproduction, excessive material transportation, waiting, unnecessary processes, inventory, motion and product defects. This study uses value stream mapping to identify waste and exploring the potential for waste. Potential waste that occurs will be reduced by using appropriate instruments based on selected indicators. The study is expected to produce a more efficient production processes so as to reduce production costs.Will ultimately result in greater profits. Keywords: lean manufacturing, value stream mapping, waste

  3. System approach to modeling of industrial technologies

    Science.gov (United States)

    Toropov, V. S.; Toropov, E. S.

    2018-03-01

    The authors presented a system of methods for modeling and improving industrial technologies. The system consists of information and software. The information part is structured information about industrial technologies. The structure has its template. The template has several essential categories used to improve the technological process and eliminate weaknesses in the process chain. The base category is the physical effect that takes place when the technical process proceeds. The programming part of the system can apply various methods of creative search to the content stored in the information part of the system. These methods pay particular attention to energy transformations in the technological process. The system application will allow us to systematize the approach to improving technologies and obtaining new technical solutions.

  4. Thermal energy consumption and carbon dioxide emissions in ceramic tile manufacture - Analysis of the Spanish and Brazilian industries

    International Nuclear Information System (INIS)

    Monfort, E.; Mezquita, A.; Vaquer, E.; Mallol, G.; Alves, H. J.; Boschi, A. O.

    2012-01-01

    Spain and Brazil are two of the world's biggest ceramic tile producers. The tile manufacturing process consumes a great quantity of thermal energy that, in these two countries, is mainly obtained from natural gas combustion, which entails CO 2 emission, a greenhouse gas. This study presents a comparative analysis of the thermal energy consumption and CO 2 emissions in the ceramic tile manufacturing process in Spain and Brazil, in terms of the different production technologies and different products made. The energy consumption and CO 2 emissions in ceramic tile manufacture by the wet process are very similar in both countries. In the dry process used in Brazil, less thermal energy is consumed and less CO 2 is emitted than in the wet process, but it is a process that is only used in manufacturing one particular type of product, which exhibits certain technical limitations. While in Spain the use of cogeneration systems in spray-dryers improves significantly the global energy efficiency. The average energy consumption in the different process stages, in both countries, lies within the range indicated in the Reference Document on Best Available Techniques in the Ceramic Manufacturing Industry (BREF of the Ceramic Manufacturing Industry) of the European Union. (Author) 14 refs.

  5. Diffusion of energy-efficient technologies in industry. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, S.Y.

    1979-01-01

    United States energy policies aim at cutting down dependence on foreign oil in two ways: by energy conservation and by finding new domestic supplies. The study investigates how the first goal can be achieved in the industrial sector (manufacturing) of the economy, which accounts for about 40% (about 7.3 million barrels per day) of the total energy consumption in the US. It is noted that industry is able to conserve as much as 25 to 30% of its energy consumption by adopting simple conservation measures and energy-efficient technologies. These technologies can be implemented without major alterations of the original equipment. The schools of thought on innovative processes are discussed; these will serve as the conceptual and methodological base of the project. (MCW)

  6. DEEP DRAWING TECHNOLOGY WITH WALL IRONING IN MASS PACKAGING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Saša Ranđelović

    2017-04-01

    Full Text Available Aluminum is a metal that is being increasingly used in the packaging industry in the modern metal forming technology, but it also provides a good opportunity for effective advertising and product promotion. Processing technologies for aluminum plastic deformation ensure superior packaging that meets the most rigorous demands in the food, pharmaceutical, chemical, and other industries. It is the case of mass production with very little material loss that offers the possibility of multiple recycling. On the other hand, today's products for general purpose consumers cannot be imagined without aggressive advertising that has a major impact on customers. Modern graphics techniques for printing images and different basic surfaces offer great opportunities that manufacturers use widely in the promotion and sale of their products.

  7. APPLICATION OF GRANULATION TECHNOLOGY IN VARIOUS INDUSTRIES

    Directory of Open Access Journals (Sweden)

    B. V. YEGOROV

    2017-10-01

    Full Text Available Science and practice proved the high efficiency of granulated mixed fodders. This article presents an overview of granulation technologies for various industries. This article discusses the application of granulation technologies in various industries. The processes of granulation are mass technological processes currently used in a wide range of industries: feed industry, food industry, pharmaceutical industry, fertilizer production, polyethylene, metal production, mining, etc. A wide range of different materials are granulated, including chemicals, iron ore, mixed fodder, and much more. Granulation is a process of pressing or shaping a material in the form of granules.  Granulation is widely used in the production of pigments, dyes, synthetic detergents, catalysts, plastics, soot, chemical reagents, etc. The use of granular raw materials in the metallurgical industry helps not only to mechanize processes, but also to increase their intensity by increasing the contact surface of interacting media. Granular fertilizers retain their properties for a long time. In the mining industry, granulation processes are used at the stage of preparation and enrichment of raw materials and release of the finished product.  Particular attention is paid to the feed industry. Granulation allows to ensure stable homogeneity, to improve sanitary and hygienic parameters, to increase nutritional value, to increase the storage period, improve the physical properties. However, despite all the advantages, the existing granulation production lines have a relatively high productivity and, at the same time, a high energy intensity. In this regard, this article proposes a technology for improving the granulation of mixed fodders. According to a preliminary literary review, It should be concluded that improving the technology of the granulation process for feed production is a topical issue in the feed industry today. The development of technology for improving the

  8. A Study to Determine the Educational Needs of Industrial Technologists in the Automotive-Type Manufacturing Industries.

    Science.gov (United States)

    Hall, Ronald Walter

    Questionnaires were used to gather data about educational needs of industrial technologists in the automotive-type manufacturing industries in the United States. Each of the 101 establishments received four questionnaires; 67 (66.3 percent) returned one or more of the questionnaires. The responses of the selected individuals were analyzed by…

  9. Investigation of the technology of conductive yarns manufacturing

    Science.gov (United States)

    Ryklin, Dzmitry; Medvetski, Sergey

    2017-10-01

    The paper is devoted to development of technology of electrically conductive yarn production. This technology allows manufacturing conductive yarns of copper wire and polyester filament yarns. Method of the predicting of the conductive yarn breaking force was developed on the base of analysing of load-elongation curves of each strand of the yarn. Also the method of the predicting of the conductive yarn diameter was offered. Investigation shows that conductive yarns can be integrated into the textiles structure using sewing or embroidery equipment. Application of developed conductive yarn is wearable electronics creating with wide range of functions, for example, for specific health issue monitoring, navigation tools or communication gadgets.

  10. The new technology for manufacturing polymer Nanopowder. Part 2

    Directory of Open Access Journals (Sweden)

    GRYAZNOV Igor Vasilevich

    2016-01-01

    Full Text Available The authors studied the problem of pollution by waste polymers. The research is dedicated to the methods of recycling of polymers, in particular PTFE. It was shown that the most environmentally friendly disposal methods with the lowest cost are the methods based on stepwise mechanical dispersion. Technologies and devices based on the principles of abrasive vortex dispersion polymers have been developed and tested. To protect the intellectual property of the author the staff of LLC TARK (Ukraine and the Science and Technology Center Polymate (Israel registered patent «Method and apparatus for manufacturing submicron polymer powder» USA No. 12 / 981.202 of 29.12.2010.

  11. The new technology for manufacturing polymer Nanopowder. Part 1

    Directory of Open Access Journals (Sweden)

    GRYAZNOV Igor Vasilevich

    2015-10-01

    Full Text Available The authors studied the problem of pollution by waste polymers. The research is dedicated to the methods of recycling of polymers, in particular PTFE. It was shown that the most environmentally friendly disposal methods with the lowest cost are the methods based on stepwise mechanical dispersion. Technologies and devices based on the principles of abrasive vortex dispersion polymers have been developed and tested. To protect the intellectual property of the author the staff of LLC TARK (Ukraine and the Science and Technology Center Polymate (Israel registered patent «Method and apparatus for manufacturing submicron polymer powder» USA No. 12 / 981.202 of 29.12.2010.

  12. New concept single screw compressors and their manufacture technology

    Science.gov (United States)

    Feng, Q.; Liu, F.; Chang, L.; Feng, C.; Peng, C.; Xie, J.; van den Broek, M.

    2017-08-01

    Single screw compressors were generally acknowledged as one of the nearly perfect machines by compressor researchers and manufacturers. However the rapid wear of the star-wheel in a single screw compressor during operation is a key reason why it hasn’t previously joined the main current compressors’ market. After more than ten years of effective work, the authors of this paper have proposed a new concept single screw compressor whose mesh-couple profile is enveloped with multi-column. Also a new design method and manufacture equipment for this kind of compressor have been developed and are described in this paper. A lot of prototype tests and a long period of industrial operations under full loading conditions have shown that the mesh-couple profiles of the new concept single compressors have excellent anti-wearness.

  13. Development of optimum manufacturing technologies of radial plates for the ITER toroidal field coils

    International Nuclear Information System (INIS)

    Nakajima, H.; Hamada, K.; Okuno, K.; Abe, K.; Shimizu, T.; Kakui, H.; Yamaoka, H.; Maruyama, N.; Takayanagi, T.

    2007-01-01

    Japan Atomic Energy Agency is studying rational manufacturing method and developing the optimum manufacturing technologies of the radial plates used in the toroidal field coils for the International Thermonuclear Experimental Reactor (ITER) in collaboration with the Japanese industries. Three sector form pieces were cut by plasma cutting machine from a hot rolled plate without any difficulties and one of them was machined to a 1.32-m long curved segment of the radial plate having the same size as the actual one. However, unacceptable large deformation about 5 mm flatness, which was not observed in 1-m long straight radial plate, was found after intermediate machining. Since it would be caused by groove direction against the hot rolled direction and/or curved shape of grooves, two trial manufactures of 0.4-m long straight radial plates have been performed to clarify the cause of the large deformation. Detailed investigation showed that the large deformation could be avoided if the groove direction would have been parallel to a rolling direction of the plate. Welding trials by using fiber laser technique was also performed and penetration of 15 mm could be obtained in a welding speed of 0.1 m/min at 5 kW laser power. An optimum manufacturing method has been proposed based on the development of manufacturing technologies

  14. Decomposing Brazilian manufacturing industry dynamics in the mid-2000s: Macroeconomic factors and their sectoral impacts

    Directory of Open Access Journals (Sweden)

    Edson Paulo Domingues

    2017-09-01

    Full Text Available The manufacturing industry's loss in participation, phenomena called “deindustrialization”, has been observed for the Brazilian economy for a while and seems to have intensified from mid-2000s. However, the literature has not developed a consistent or integrated analysis of this process. We have used a detailed simulation model to identify how macroeconomic factors (such as exchange rate, labor costs, and household consumption have contributed to manufacturing dynamics. Our results indicate that the macroeconomic scenario explains a large portion of the manufacturing industry's participation loss. The rise in households consumption and investment, important factors in this period, were responsible for dampening of the pressures coming from the currency appreciation and the workforce costs, benefiting some industrial sectors, but not avoiding the manufacturings participation loss. Keywords: Manufacturing, Growth, Development, Simulations, JEL classification: O14, C68, D58

  15. Handbook of industrial refractories technology principles, types, properties and applications

    CERN Document Server

    Caniglia, Stephen

    1989-01-01

    Encompasses the entire range of industrial refractory materials and forms: properties and their measurement, applications, manufacturing, installation and maintenance techniques, quality assurance, and statistical process control.

  16. Development of a manufacturing technology of compacted graphite iron castings from a cupola furnace

    Directory of Open Access Journals (Sweden)

    O. Bouska

    2012-01-01

    Full Text Available Compacted graphite iron, also known as vermicular cast iron or semiductile cast iron is a modern material, the production of which is increasing globaly. Recently this material has been very often used in automotive industry. This paper reviews some findigs gained during the development of the manufacturing technology of compacted graphite iron under the conditions in Slévárna Heunisch Brno, Ltd. The new technology assumes usage of cupola furnace for melting and is beeing developed for production of castings weighing up to 300 kilograms poured into bentonite sand moulds.

  17. Industrial applications of sol-gel technology

    International Nuclear Information System (INIS)

    Tuloch, S.M.; Tulloch, G.E.

    1995-01-01

    The purpose of this paper has been to provide a broad, rather than comprehensive view. We have presented a range of applications and only a selection of involved companies and researchers and have relied to a large extent on published information. Nevertheless, we are sure that our view of the importance of Sol-gel technology as an emerging technology, with enormous impact across a wide range of manufacturing, is demonstrated. Applications which are either in production or have been foreshadowed include four broad categories: coatings, fibres, powders and monoliths

  18. Agglomeration economies in manufacturing industries: the case of Spain

    OpenAIRE

    Olga Alonso-Villar; José-María Chamorro-Rivas; Xulia González-Cerdeira

    2001-01-01

    This paper analyses the extent of geographical concentration of Spanish industry between 1993 and 1999, and study the agglomeration economies that could underlie that concentration. The results confirm that there is major geographic concentration in a number of industries with widely varying characteristics, including high-tech businesses and those linked to the provision of natural resources as well as traditional industries. The analysis of the scope of spillovers behind this agglomeration ...

  19. Environmental and risk screening for prioritizing pollution prevention opportunities in the U.S. printed wiring board manufacturing industry.

    Science.gov (United States)

    Lam, Carl W; Lim, Seong-Rin; Schoenung, Julie M

    2011-05-15

    Modern manufacturing of printed wiring boards (PWBs) involves extensive use of various hazardous chemicals in different manufacturing steps such as board preparation, circuit design transfer, etching and plating processes. Two complementary environmental screening methods developed by the U.S. EPA, namely: (i) the Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI) and (ii) Risk-Screening Environmental Indicators (RSEI), are used to quantify geographic and chemical environmental impacts in the U.S. PWB manufacturing industry based on Toxics Release Inventory (TRI) data. Although the release weight percentages of industrial chemicals such as methanol, glycol ethers and dimethylformamide comprise the larger fraction of reported air and water emissions, results indicate that lead, copper and their compounds' releases correspond to the highest environmental impact from toxicity potentials and risk-screening scores. Combining these results with further knowledge of PWB manufacturing, select alternative chemical processes and materials for pollution prevention are discussed. Examples of effective pollution prevention options in the PWB industry include spent etchant recovery technologies, and process and material substitutions. In addition, geographic assessment of environmental burden highlights states where promotion of pollution prevention strategies and emissions regulations can have the greatest effect to curb the PWB industry's toxic release impacts. Copyright © 2011 Elsevier B.V. All rights reserved.

  20. COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH

    Energy Technology Data Exchange (ETDEWEB)

    Roy Scandrol

    2003-10-01

    Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregates that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create nine (9) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry FGD technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.

  1. COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH

    Energy Technology Data Exchange (ETDEWEB)

    Roy Scandrol

    2003-04-01

    Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregates that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create eight (8) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry flue gas desulfurization (FGD) technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.

  2. ACCOUNTING AND ORGANISATIONAL CHANGE IN A MANUFACTURING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Jenny van Sten-van’t Hoff

    2011-01-01

    Full Text Available The paper discusses change drivers, change actions and change outcomes in a textilemanufacturing industry in converting traditional management accounting into activitybasedmanagement.

  3. An Empirical study on the competitiveness and innovation in four sectors of the Turkish manufacturing industry

    OpenAIRE

    Ulusoy, Gündüz; Ulusoy, Gunduz; Çetindamar, Dilek; Cetindamar, Dilek; Yeğenoğlu, Hande; Yegenoglu, Hande; Bulut, Çağrı; Bulut, Cagri

    2007-01-01

    In this paper, we report on some of the results of the Innovations in Manufacturing Industries in Turkey Study (IMITS). This study is an empirical investigation into the innovation performance and competitive strategies of manufacturing firms in Turkey. The data was gathered in nine different cities in Turkey during the period August 2004 – January 2005. The survey was conducted through face-to-face interviews due to the complex nature of the survey and was implemented in 135 manufacturing fi...

  4. Industrial applications of low energy accelerator technologies

    International Nuclear Information System (INIS)

    Park, Jae Won; Kim, Hyung Jin; Kim, Jun Yeon; Lee, Jae Sang; Yeo, Sun Mog; Lee, Ji Ah

    2008-05-01

    Industrial application researches utilizing a beam extracting unit and an accelerator with an energy less than 3 MeV have been conducted. Although a number of industrial application areas exist, a few research items had been selected for this project, which include the gemstone coloration and the surface modifications of metals/polymers. In the case of gemstone coloration, the green/yellow colored diamond by a proton beam irradiation and blue color emitting sapphire utilizing Co ion implantation are being evaluated as the high potential for commercialization. And, the band gap structures as a result of impurities' doping was calculated with density functional theory (DFT) and it was found to be well consistent with experimental results. The surface modification of stainless juice extracting gears have been successful and patented, resulting in a technology transfer to the company. The reduction in the detachment of the metallic elements during juice extracting as a results of ion beam surface modification is expected to be broadly applicable to the other relevant industrial materials and parts. In the case of gemstone coloration, it is estimated to be one of the highest commercially valuable items because of its extremely low processing expense. The research results have been successful and is worth while transferring the technologies to the industrial sectors. During the second phase research, 6 SCI papers have been published and 9 patents have been submitted and 3 patents have been registered. 1 technology has been transferred to the company for industrialization and 1 technology is pending for a transference

  5. Will robots replace us? : an Empirical analysis of the impacts of robotization on employment in the Norwegian manufacturing industry

    OpenAIRE

    Grøndahl, Fredrik; Eriksen, Gina Hegland

    2017-01-01

    Rapid advances in robotics, artificial intelligence, and digital technologies have introduced renewed concern that labor will become redundant. The aim of this thesis is to assess whether there exists a relationship between robotization and employment in the time periods 1996-2005 and 2008-2015 in Norwegian manufacturing industries. We exploit data on operational robots from the International Federation of Robotics and individual level data from the Norwegian Labour Force Surve...

  6. 77 FR 14022 - Guidance for Industry on Chemistry, Manufacturing, and Controls Information-Fermentation-Derived...

    Science.gov (United States)

    2012-03-08

    ...] Guidance for Industry on Chemistry, Manufacturing, and Controls Information--Fermentation-Derived... (CMC) Information-- Fermentation-Derived Intermediates, Drug Substances, and Related Drug Products for... to submit to support the CMC information for fermentation-derived intermediates, drug substances, and...

  7. NESHAP for the Portland Cement Manufacturing Industry: Fact Sheets for Actions Since 2015

    Science.gov (United States)

    EPA is extending its approval for the use of an alternative method to show compliance with hydrogen chloride (HCl) emissions limits in the National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing Industry

  8. Final Rule: NESHAP for the Portland Cement Manufacturing Industry: Alternative Monitoring Method

    Science.gov (United States)

    EPA is extending its approval for the use of an alternative method to show compliance with hydrogen chloride (HCl) emissions limits in the National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing Industry

  9. Innovation clusters and determinants of innovativeness in manufacturing industries

    NARCIS (Netherlands)

    Sevinç, M.; Ulusoy, G.

    2016-01-01

    Innovation is an important source of competitiveness and is studied extensively by both the academicians and the practitioners particularly in the last decades. This study is based on the results of an exploratory study conducted in the Northern Marmara region of Turkey covering 184 manufacturing

  10. Innovation Training within the Australian Advanced Manufacturing Industry

    Science.gov (United States)

    Donovan, Jerome Denis; Maritz, Alex; McLellan, Andrew

    2013-01-01

    Innovation has emerged as a core driver for the future profitability and success of the manufacturing sector, and increasingly both governments and the private sector are examining ways to support the development of innovation capabilities within organisations. In this research, we have evaluated a government-funded innovation training course…

  11. Root Cause Assessment for a Manufacturing Industry: A Case Study

    Directory of Open Access Journals (Sweden)

    R. Kalantri

    2013-03-01

    Full Text Available Root-cause identification for quality related problems are key issues for manufacturing processes. It has been a very challenging engineering problem particularly in a multistage manufacturing, where maximum number of processes and activities are performed. However, it may also be implemented with ease in each and every individual set up and activities in any manufacturing process. Kaizen is aimed towards reduction in different types of losses i.e. Failure Loss/ Breakdown Loss, Minor stoppage, idling loss, Setup and adjustment loss etc. So as to improve quality and productivity.In this report, root-cause identification methodology has been adopted to eliminate the rejection of product manufactured by the enterprise and improving the life of product. Brainstorming and other Root Cause Assesmenttools have been used to find out the reasons of tube failure and vibration in tubular strander. Solutions of these problems have also given in this report. Kaizen activities have reduced the time consumed in daily activities of cleaning, lubricating, inspection etc. A detailed study has illustrated the effectiveness of the proposed methodology.

  12. Challenges and opportunities of fibre-reinforced polymers in additive manufacturing with focus on industrial applications

    DEFF Research Database (Denmark)

    Hofstätter, Thomas; Pedersen, David Bue; Tosello, Guido

    2017-01-01

    Functional parts made by additive manufacturing of polymers have entered the area of industrial applications in recent years providing a wide range of materials with various mechanical, thermal, and electrical properties. These additive manufacturing processes can be combined with known fibre...

  13. Technology Roadmap for Energy Reduction in Automotive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2008-09-01

    U.S. Department of Energy’s (DOE) Industrial Technologies Program (ITP), in collaboration with the United States Council for Automotive Research LLC (USCAR), hosted a technology roadmap workshop in Troy, Michigan in May 2008. The purpose of the workshop was to explore opportunities for energy reduction, discuss the challenges and barriers that might need to be overcome, and identify priorities for future R&D. The results of the workshop are presented in this report.

  14. Six sigma critical success factors in manufacturing industries

    Science.gov (United States)

    Mustafa, Zainol; Jamaluddin, Z.

    2017-04-01

    The success of Six Sigma implementation is known to depend on a number of contributing factors. The purpose of this paper is to explore Six Sigma critical success factors (CSFs) in the context of Malaysian manufacturing organizations. Although Six Sigma success factors have been abundantly researched in the global context, in this paper, a maiden attempt is made to identify, through an extensive literature review, the CSFs for Six Sigma implementation followed by their validation using primary data collection from Malaysian manufacturing companies. A total of 33 indicators have thus been compiled through an extensive literature review which then been grouped into 6 contributing factors. These contributing success factors are then validated through an empirical research of selected Malaysian manufacturing companies at various stages of implementation of the Six Sigma process improvement methodology. There has been an overemphasis on the role and commitment of the management in the success of a Six Sigma program. Though it is undoubted, certain other factors also play an equally important role in ensuring that the Six Sigma programs are successful. The factor analysis of CSFs of the Malaysian manufacturing organizations selected in this study demonstrates that the top factor is a composite factor showing combination of the ability of the project teams to use the process management on quality initiative and a training using a proper analysis in problem solving. The CSFs extracted through the factor analysis could provide a basis for manufacturing organizations embarking on the Six Sigma journey to look beyond just management involvement. Thus, one can develop an integrated framework of other factors as outlined and give them appropriate priority and focus.

  15. Incorporation of industrial laundry sludge in the manufacture of particleboards

    Directory of Open Access Journals (Sweden)

    Luciana Cristina Soto Herek Rezende

    2015-10-01

    Full Text Available This study aimed to demonstrate a sustainable alternative to the use of residues by treating industrial laundry wastewater, thereby making them useful in producing wood particleboards as furniture. For this purpose, physical, chemical, and mechanical tests were carried out in order to characterize the product, which showed acceptable characteristics for commercial use as elements in the furniture industry.

  16. [Noise hazard and hearing loss in workers in automotive component manufacturing industry in Guangzhou, China].

    Science.gov (United States)

    Wang, Zhi; Liang, Jiabin; Rong, Xing; Zhou, Hao; Duan, Chuanwei; Du, Weijia; Liu, Yimin

    2015-12-01

    To investigate noise hazard and its influence on hearing loss in workers in the automotive component manufacturing industry. Noise level in the workplace of automotive component manufacturing enterprises was measured and hearing examination was performed for workers to analyze the features and exposure levels of noise in each process, as well as the influence on hearing loss in workers. In the manufacturing processes for different products in this industry, the manufacturing processes of automobile hub and suspension and steering systems had the highest degrees of noise hazard, with over-standard rates of 79.8% and 57.1%, respectively. In the different technical processes for automotive component manufacturing, punching and casting had the highest degrees of noise hazard, with over-standard rates of 65.0% and 50%, respectively. The workers engaged in the automotive air conditioning system had the highest rate of abnormal hearing ability (up to 3.1%). In the automotive component manufacturing industry, noise hazard exceeds the standard seriously. Although the rate of abnormal hearing is lower than the average value of the automobile manufacturing industry in China, this rate tends to increase gradually. Enough emphasis should be placed on the noise hazard in this industry.

  17. Energy-climate-manufacturing nexus: New insights from the regional and global supply chains of manufacturing industries

    International Nuclear Information System (INIS)

    Kucukvar, Murat; Cansev, Bunyamin; Egilmez, Gokhan; Onat, Nuri C.; Samadi, Hamidreza

    2016-01-01

    Highlights: • A multi region input–output sustainability assessment model is developed. • Energy-climate-manufacturing nexus within the context of global supply chains is investigated. • Electricity, Gas, and Water Supply sector is the main contributor to energy and carbon impacts. • Turkish regional manufacturing accounts for approximately 40–60% of total carbon emissions. • China, USA, and Rest-of-the World have the largest shares in the Turkish global energy footprint. - Abstract: The main objectives of this research are to improve our understanding of energy-climate-manufacturing nexus within the context of regional and global manufacturing supply chains as well as show the significance of full coverage of entire supply chain tiers in order to prevent significant underestimations, which might lead to invalid policy conclusions. With this motivation, a multi region input–output (MRIO) sustainability assessment model is developed by using the World Input–Output Database, which is a dynamic MRIO framework on the world’s 40 largest economies covering 1440 economic sectors. The method presented in this study is the first environmentally-extended MRIO model that harmonizes energy and carbon footprint accounts for Turkish manufacturing sectors and a global trade-linked carbon and energy footprint analysis of Turkish manufacturing sectors is performed as a case study. The results are presented by distinguishing the contributions of five common supply chain phases such as upstream suppliers, onsite manufacturing, transportation, wholesale, and retail trade. The findings showed that onsite and upstream supply chains are found to have over 90% of total energy use and carbon footprint for all industrial sectors. Electricity, Gas and Water Supply sector is usually found to be as the main contributor to global climate change, and Coke, Refined Petroleum, and Nuclear Fuel sector is the main driver of energy use in upstream supply chains. Overall, the

  18. Waste reduction possibilities for manufacturing systems in the industry 4.0

    Science.gov (United States)

    Tamás, P.; Illés, B.; Dobos, P.

    2016-11-01

    The industry 4.0 creates some new possibilities for the manufacturing companies’ waste reduction for example by appearance of the cyber physical systems and the big data concept and spreading the „Internet of things (IoT)”. This paper presents in details the fourth industrial revolutions’ more important achievements and tools. In addition there will be also numerous new research directions in connection with the waste reduction possibilities of the manufacturing systems outlined.

  19. The industrial resurgence of Southern California? Advanced ground transportation equipment manufacturing and local economic develoment

    OpenAIRE

    A J Scott; D Bergman

    1995-01-01

    Southern California is in a deeply rooted process of economic restructuring. Much of the region's manufacturing base is made up of two groups of industries: a declining aerospace - defense sector, and a low-wage, low-skill sweatshop sector. What are the prospects for creating a growing manufacturing base focused on high-wage, high-skill industries? In this paper we examine the opportunities presented by the Los Angeles County Metropolitan Transportation Authority's S183 billion thirty-year ca...

  20. User Cost of Debt-Financed Capital in Irish Manufacturing Industry: 1985 2011

    OpenAIRE

    KEARNEY, IDE; ZNUDERL, NUSA

    2013-01-01

    PUBLISHED This paper provides estimates of the cost of debt-financed capital to Irish manufacturing industry over the period 1985 to 2011. The estimates are provided for two types of capital assets, machinery and equipment and industrial buildings. They also incorporate policy interventions aimed at influencing investment behaviour of manufacturing firms in Ireland. The results show that large capital gains recorded during the Celtic Tiger period created a downward distortion in the user c...

  1. Sustainable Product Service Systems in Small and Medium Enterprises (SMEs: Opportunities in the Leather Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Ricardo J. Hernández Pardo

    2012-01-01

    Full Text Available This paper presents an approach to identify opportunities to develop sustainable Product Service Systems (PSS involving Small and Medium Enterprises (SMEs. The purpose of the research is to build understanding of how the integration of product and service design and the use of Information and Communication Technologies (ICT can contribute to identify opportunities to develop sustainable PSS involving SMEs. In order to develop the approach, research with 16 Colombian Manufacturing SMEs was carried out. A reference model and four generic types of PSS according to the relationships between product and service design and ICT are used to analyse the data. Finally, the possibility of extending the approach into a general framework to work with other industries is discussed.

  2. Manufacturing technologies for nanocomposite ceramic structural materials and coatings

    Energy Technology Data Exchange (ETDEWEB)

    Gadow, R. [Universitaet Stuttgart, Institut fuer Fertigungstechnik keramischer Bauteile, D-70569 Stuttgart, Allmandring 7b (Germany)], E-mail: rainer.gadow@ifkb.uni-stuttgart.de; Kern, F.; Killinger, A. [Universitaet Stuttgart, Institut fuer Fertigungstechnik keramischer Bauteile, D-70569 Stuttgart, Allmandring 7b (Germany)

    2008-02-25

    The new material class of ceramic nanocomposites, containing at least one phase in nanometric dimension, has achieved special interest in previous years. While earlier research was focused on materials science and microstructural details in laboratory scale the subject of developing suitable manufacturing technologies in technical scale is the challenge for the manufacturing engineer. The same high-performance features which make the nanocomposite materials so interesting in their properties are absolutely detrimental if it comes to production of these materials. Extreme hardness, toughness and abrasion resistance make the state of the art cutting-and-machining operations extremely cost intensive so that, from a manufacturing point of view, true near-net-shape manufacturing is mandatory to accomplish reasonable cost targets. Ceramic feedstocks with both, high solid content to reduce shrinkage and warping and stable processing conditions are required to accomplish this aim of near-net-shape processing. Stable and reproducible processing conditions, e.g. favourable rheological properties for injection moulding are essentials for the manufacturing engineer. These prerequisites of ceramic production technologies cannot be reached with pure nanopowders in the 10-20 nm range but materials with a micro-nano architecture can fulfill these requirements, using a mixture of a submicron-sized matrix in the 100-200 nm range and smaller nanosized additives in <20% content which contribute the desired functionality. By using these micro-nanocomposites near-net-shape ceramic forming technologies such as injection moulding, gel casting and slip casting have been developed which lead to high-performance materials at affordable production cost. Advanced surface technologies include nanoceramic coatings made by thermokinetic deposition processes. Modern ceramic processing, i.e. spray drying leads to fine granulated nanopowders with appropriate flowability for subsequent APS plasma or

  3. Fourteenth National Industrial Energy Technology Conference: Proceedings

    International Nuclear Information System (INIS)

    1992-01-01

    Presented are many short articles on various aspects of energy production, use, and conservation in industry. The impacts of energy efficient equipment, recycling, pollution regulations, and energy auditing are discussed. The topics covered include: New generation sources and transmission issues, superconductivity applications, integrated resource planning, electro technology research, equipment and process improvement, environmental improvement, electric utility management, and recent European technology and conservation opportunities. Individual papers are indexed separately

  4. Efficiency of innovative technology in construction industry

    Science.gov (United States)

    Stverkova, H.; Vaclavik, V.

    2017-10-01

    The need for sustainability increasingly influences the development of new technologies, business processes and working practices. Innovations are an important part of all business processes. The aim of innovation is, in particular, to reduce the burden on the environment. The current trend in the construction industry is diamond rope cutting. The aim of the paper is to evaluate the most advanced technology for cutting and removing concrete structures in terms of efficiency.

  5. Space and Industrial Brine Drying Technologies

    Science.gov (United States)

    Jones, Harry W.; Wisniewski, Richard S.; Flynn, Michael; Shaw, Hali

    2014-01-01

    This survey describes brine drying technologies that have been developed for use in space and industry. NASA has long considered developing a brine drying system for the International Space Station (ISS). Possible processes include conduction drying in many forms, spray drying, distillation, freezing and freeze drying, membrane filtration, and electrical processes. Commercial processes use similar technologies. Some proposed space systems combine several approaches. The current most promising candidates for use on the ISS use either conduction drying with membrane filtration or spray drying.

  6. Forecasting the Success of Implementing Sensors Advanced Manufacturing Technology

    Directory of Open Access Journals (Sweden)

    Cheng-Shih Su

    2014-08-01

    Full Text Available This paper is presented fuzzy preference relations approach to forecast the success of implementing sensors advanced manufacturing technology (AMT. In the manufacturing environment, performance measurement is based on different quantitative and qualitative factors. This study proposes an analytic hierarchical prediction model based on fuzzy preference relations to help the organizations become aware of the essential factors affecting the AMT implementation, forecasting the chance of successful implementing sensors AMT, as well as identifying the actions necessary before implementing sensors AMT. Then predicted success/failure values are obtained to enable organizations to decide whether to initiate sensors AMT, inhibit adoption or take remedial actions to increase the possibility of successful sensors AMT initiatives. This proposed approach is demonstrated with a real case study involving six influential factors assessed by nine evaluators solicited from a semiconductor engineering incorporation located in Taiwan.

  7. SVM-Based Dynamic Reconfiguration CPS for Manufacturing System in Industry 4.0

    Directory of Open Access Journals (Sweden)

    Hyun-Jun Shin

    2018-01-01

    Full Text Available CPS is potential application in various fields, such as medical, healthcare, energy, transportation, and defense, as well as Industry 4.0 in Germany. Although studies on the equipment aging and prediction of problem have been done by combining CPS with Industry 4.0, such studies were based on small numbers and majority of the papers focused primarily on CPS methodology. Therefore, it is necessary to study active self-protection to enable self-management functions, such as self-healing by applying CPS in shop-floor. In this paper, we have proposed modeling of shop-floor and a dynamic reconfigurable CPS scheme that can predict the occurrence of anomalies and self-protection in the model. For this purpose, SVM was used as a machine learning technology and it was possible to restrain overloading in manufacturing process. In addition, we design CPS framework based on machine learning for Industry 4.0, simulate it, and perform. Simulation results show the simulation model autonomously detects the abnormal situation and it is dynamically reconfigured through self-healing.

  8. Industrial image processing visual quality control in manufacturing

    CERN Document Server

    Demant, Christian; Garnica, Carsten

    2013-01-01

    This practical introduction focuses on how to build integrated solutions to industrial vision problems from individual algorithms. It gives a hands-on guide for setting up automated visual inspection systems using the NeuroCheck software package.

  9. Characterizing emerging industrial technologies in energy models

    Energy Technology Data Exchange (ETDEWEB)

    Laitner, John A. (Skip); Worrell, Ernst; Galitsky, Christina; Hanson, Donald A.

    2003-07-29

    Conservation supply curves are a common tool in economic analysis. As such, they provide an important opportunity to include a non-linear representation of technology and technological change in economy-wide models. Because supply curves are closely related to production isoquants, we explore the possibility of using bottom-up technology assessments to inform top-down representations of energy models of the U.S. economy. Based on a recent report by LBNL and ACEEE on emerging industrial technologies within the United States, we have constructed a supply curve for 54 such technologies for the year 2015. Each of the selected technologies has been assessed with respect to energy efficiency characteristics, likely energy savings by 2015, economics, and environmental performance, as well as needs for further development or implementation of the technology. The technical potential for primary energy savings of the 54 identified technologies is equal to 3.54 Quads, or 8.4 percent of the assume d2015 industrial energy consumption. Based on the supply curve, assuming a discount rate of 15 percent and 2015 prices as forecasted in the Annual Energy Outlook2002, we estimate the economic potential to be 2.66 Quads - or 6.3 percent of the assumed forecast consumption for 2015. In addition, we further estimate how much these industrial technologies might contribute to standard reference case projections, and how much additional energy savings might be available assuming a different mix of policies and incentives. Finally, we review the prospects for integrating the findings of this and similar studies into standard economic models. Although further work needs to be completed to provide the necessary link between supply curves and production isoquants, it is hoped that this link will be a useful starting point for discussion with developers of energy-economic models.

  10. Technological and industrial applications of neutrons

    International Nuclear Information System (INIS)

    Weitkamp, C.

    1976-07-01

    Technological and industrial applications of neutrons are reviewed except applications in power generation, biology and medicine, and solid-state research. Techniques are grouped in three main categories: isotope production, material testing, and material analysis. Following a brief description of the different methods, an attempt is made to assess their applicability and to point out current developments. (orig.) [de

  11. Transformations: Technology and the Music Industry.

    Science.gov (United States)

    Peters, G. David

    2001-01-01

    Focuses on the companies and organizations of the Music Industry Conference (MIC). Addresses topics such as: changes in companies due to technology, audio compact discs, the music instrument digital interface (MIDI) , digital sound recording, and the MIC on-line music instruction programs offered. (CMK)

  12. Forecasting Technological Discontinuities in the ICT Industry

    DEFF Research Database (Denmark)

    Hoisl, Karin; Stelzer, Tobias; Biala, Stefanie

    2015-01-01

    in the ICT industry. The conjoint approach allows for a simulation of the forecasting process and considers utility trade-offs. The results show that for both types of experts the perceived benefit of users most highly contributes to predicting technological discontinuities. Internal experts assign more...

  13. Technological and industrial applications of neutrons

    International Nuclear Information System (INIS)

    Weitkamp, C.

    1977-01-01

    Technological and industrial applications of neutrons are reviewed except applications in power generation, biology and medicine, and solid-state research. Techniques are grouped in three main catagories: material production, material testing, and material analysis. Following a brief description of the different methods, an attempt is made to assess their applicability and to point out current developments. (author)

  14. Industrial Revolution and Scientific and Technological Progress

    NARCIS (Netherlands)

    Fremdling, Rainer

    1996-01-01

    This working paper is a draft chapter for the UNESCO-History of Humanity. Different views on the concept and spread of the industrial revolution, which took place from the late 18th century onwards, are dealt with. By way of example the revolutionary character of technological change and the search

  15. Simple, cost effective & result oriented framework for supplier performance measurement in sports goods manufacturing industry

    Directory of Open Access Journals (Sweden)

    2011-09-01

    Full Text Available The emergences of global markets have increased competition worldwide. For the Sports Goods Manufacturing Industry which is considered to be an intensive supplier base industry with limited resources to sustain in what is already a very competitive market there is a need for the entire supply chain viz. raw material and machinery suppliers and manufacturers to measure their supplier's performance to reduce business risks and revenue losses. How to design & execute a simple, cost effective & result oriented Framework for Supplier Performance Measurement for sports goods manufacturing small - medium enterprises is the main aim of this research paper.

  16. A state of the Art report on Manufacturing technology of high burn-up fuel cladding

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyeong Ho; Nam, Cheol; Baek, Jong Hyuk; Choi, Byung Kwon; Park, Sang Yoon; Lee, Myung Ho; Jeong, Yong Hwan

    1999-09-01

    In order to manufacturing the prototype fuel cladding, overall manufacturing processes and technologies should be thoroughly understood on the manufacturing processes and technologies of foreign cladding tubes. Generally, the important technology related to fuel cladding tube manufacturing processes for PWRs/PHWRs is divided into three stages. The first stage is to produce the zirconium sponge from zirconium sand, the second stage is to produce the zircaloy shell or TREX from zirconium sponge ingot and finally, cladding is produced from TREX or zircaloy shell. Therefore, the manufacturing processes including the first and second stages are described in brief in this technology report in order to understand the whole fuel cladding manufacturing processes. (author)

  17. Technology demonstration of starshade manufacturing for NASA's Exoplanet mission program

    Science.gov (United States)

    Kasdin, N. J.; Lisman, D.; Shaklan, S.; Thomson, M.; Cady, E.; Martin, S.; Marchen, L.; Vanderbei, R. J.; Macintosh, B.; Rudd, R. E.; Savransky, D.; Mikula, J.; Lynch, D.

    2012-09-01

    It is likely that the coming decade will see the development of a large visible light telescope with enabling technology for imaging exosolar Earthlike planets in the habitable zone of nearby stars. One such technology utilizes an external occulter, a satellite flying far from the telescope and employing a large screen, or starshade, to suppress the incoming starlight suffciently for detecting and characterizing exoplanets. This trades the added complexity of building the precisely shaped starshade and flying it in formation against simplifications in the telescope since extremely precise wavefront control is no longer necessary. In this paper we present the results of our project to design, manufacture, and measure a prototype occulter petal as part of NASA's first Technology Development for Exoplanet Missions program. We describe the mechanical design of the starshade and petal, the precision manufacturing tolerances, and the metrology approach. We demonstrate that the prototype petal meets the requirements and is consistent with a full-size occulter achieving better than 10-10 contrast.

  18. Emerging Technologies in the Built Environment: Geographic Information Science (GIS), 3D Printing, and Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    New, Joshua Ryan [ORNL

    2014-01-01

    Abstract 1: Geographic information systems emerged as a computer application in the late 1960s, led in part by projects at ORNL. The concept of a GIS has shifted through time in response to new applications and new technologies, and is now part of a much larger world of geospatial technology. This presentation discusses the relationship of GIS and estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual parcel. The method combines annual building energy simulations for city-specific prototypical buildings and commonly available geospatial data in a GIS framework. Abstract 2: This presentation focuses on 3D printing technologies and how they have rapidly evolved over the past couple of years. At a basic level, 3D printing produces physical models quickly and easily from 3D CAD, BIM (Building Information Models), and other digital data. Many AEC firms have adopted 3D printing as part of commercial building design development and project delivery. This presentation includes an overview of 3D printing, discusses its current use in building design, and talks about its future in relation to the HVAC industry. Abstract 3: This presentation discusses additive manufacturing and how it is revolutionizing the design of commercial and residential facilities. Additive manufacturing utilizes a broad range of direct manufacturing technologies, including electron beam melting, ultrasonic, extrusion, and laser metal deposition for rapid prototyping. While there is some overlap with the 3D printing talk, this presentation focuses on the materials aspect of additive manufacturing and also some of the more advanced technologies involved with rapid prototyping. These technologies include design of carbon fiber composites, lightweight metals processing, transient field processing, and more.

  19. Statistical Analyses and Modeling of the Implementation of Agile Manufacturing Tactics in Industrial Firms

    Directory of Open Access Journals (Sweden)

    Mohammad D. AL-Tahat

    2012-01-01

    Full Text Available This paper provides a review and introduction on agile manufacturing. Tactics of agile manufacturing are mapped into different production areas (eight-construct latent: manufacturing equipment and technology, processes technology and know-how, quality and productivity improvement, production planning and control, shop floor management, product design and development, supplier relationship management, and customer relationship management. The implementation level of agile manufacturing tactics is investigated in each area. A structural equation model is proposed. Hypotheses are formulated. Feedback from 456 firms is collected using five-point-Likert-scale questionnaire. Statistical analysis is carried out using IBM SPSS and AMOS. Multicollinearity, content validity, consistency, construct validity, ANOVA analysis, and relationships between agile components are tested. The results of this study prove that the agile manufacturing tactics have positive effect on the overall agility level. This conclusion can be used by manufacturing firms to manage challenges when trying to be agile.

  20. Sustaining Competitiveness: Moving Towards Upstream Manufacturing in Specialized-Market-Based Clusters in the Chinese Toy Industry

    Directory of Open Access Journals (Sweden)

    Huasheng Zhu

    2016-02-01

    Full Text Available Western industrial cluster literature pays little attention to specialized markets (SMs and the geographical agglomeration of distributors or sale agencies (SAs. This paper takes Linyin, Shandong, a famous commodity city in Northeastern China, as an example, to discuss the determinants that make SAs in SMs of the toy industry move towards upstream manufacturing. A structured questionnaire survey and subsequent interviews were carried out during 2011 and 2012 to collect data, and a Binary Logistic Regression Model was used to process the data. This paper looks from the perspective of global production networks theory, establishes an analytical framework that combines individual motivations of intra-firm coordination, local inter-firm relationships and dynamic cross-regional level relationships. The findings indicate that the expansion of SAs towards manufacturing allows them to sustain competitiveness under changing circumstances. The local inter-firm relationships within SM-based clusters not only makes it easy to obtain material and human resources with lower manufacturing costs, but also facilitates the access to production knowledge and technologies for an expansion of production scale. Cross-regional relationships with suppliers provide an informal channel for SAs to obtain skills, which is fundamental for an expansion into manufacturing. In addition, it is a preference for strengthening competitiveness rather than the simple pursuit of economic profit that encourages SAs to invest in manufacturing.

  1. Advances in Information Technology and Industry Applications

    CERN Document Server

    2012-01-01

    With success of ICEEE 2010 in Wuhan, China, and December 4 to 5, 2010, the second International Conference of Electrical and Electronics Engineering (ICEEE 2011) will be held in Macau, China, and December 1 to 2, 2011. ICEEE is an annual conference to call together researchers, engineers, academicians as well as industrial professionals from all over the world to present their research results and development activities in Electrical and Electronics Engineering along with Computer Science and Technology, Communication Technology, Artificial Intelligence, Information Technology, etc.   This year ICEEE is sponsored by International Industrial Electronics Center, Hong Kong. And based on the deserved reputation, more than 750 papers have been submitted to ICEEE 2011, from which about 94 high quality original papers have been selected for the conference presentation and inclusion in the “Advanced Computer, Communication, and Control” book based on the referees’ comments from peer-refereed. All the papers wi...

  2. Technological Integration of Acquisitions in Digital Industries

    DEFF Research Database (Denmark)

    Henningsson, Stefan; Toppenberg, Gustav

    2015-01-01

    providers to extend the platform core and to derive network effects by consolidating platform user groups, and (b) complement providers to create monopoly positions for the complements and for innovation complementarity. To enable these acquisition benefits, acquirers face technological integration...... challenges in process and product integration. Through a case study of Network Solutions Corp. (NSC), a Fortune 500 company that has acquired more than 175 business units, we develop four propositions explaining how the benefits of platform core and complement acquisitions are differently contingent......Acquisitions have become essential tools to retain the technological edge in digital industries. This paper analyses the technological integration challenges in such acquisitions. Acquirers in digital industries are typically platform leaders in platform markets. They acquire (a) other platform...

  3. Sustainability of fiber reinforced laminate and honeycomb composites in manufacturing industries

    Science.gov (United States)

    Asmatulu, Eylem; Alonayni, Abdullah; Alamir, Mohammed; Rahman, Muhammad M.

    2018-03-01

    Fiber reinforced polymer (FRP) composites provide a lot of benefits, including strength-to-weight ratio / light weight, superior mechanical properties, low maintenance, prolonged service life, as well as corrosion, fatigue and creep resistance. However, sustainability of the FRP composites have not been studied in detail in terms of long term productions in various industries, such as aerospace, wind energy, automotive and defense. Carbon fibers are relatively expensive because of the energy intensive production systems, and lack of easy production options, which forces many companies to recycle and reuse the FRP composites in the same or different manufacturing industries. This study mainly deals with two important issues, including the disposal of composite wastes generated during the manufacturing of composite parts, and the disposal of the products at the end of their useful life. It is believed that the carbon fibers in the used composites will have still high mechanical strengths to use in different composite manufacturing after its end of life. The major manufacturing costs come from the labor and raw materials, so using the recycled carbon fibers will make sustainable composite productions in other industries. This paper presents the current status and outlook of the FRP composite recycling and re-manufacturing techniques in the same or different industries. A future vision of the FRP composites will be investigated with sustainability point of views. This study will also mention about the sustainability issues in laminate and honeycomb composites, new product design and developments and potential applications in different manufacturing industries.

  4. Evaluation of technology transfer on collider quadrupole manufacture at LBL

    International Nuclear Information System (INIS)

    Boeer, J.; Fechteler, H.; Moryson, H.; Sommer, F.; Grueneberg, H.; Kreutz, R.; Krischel, D.; Bensiek, W.; Ryan, B.

    1992-01-01

    As part of the contract on the collider quadruple magnets a technology transfer to Siemens Power Generation Group (KWU) was performed at Lawrence Berkeley Laboratory, Berkeley in September 1991. One inner and outer 1 m long coil each should be manufactured under the surveillance of LBL staff to become familiar with the coil production facilities available at LBL. In addition, KWU had the possibility to observe the production process of 5 m quadruple coils. The work is successfully completed and provided additional information for the further hardware operations at the Siemens site

  5. CUSTOMIZATION IN THE MANUFACTURING INDUSTRY: SURVEY RESULTS IN SOUTHEASTERN BRAZIL

    Directory of Open Access Journals (Sweden)

    Alexandre Reis Graeml

    2009-12-01

    Full Text Available This paper discusses the advantage of using kanban, postponement, modularization, just-in-time, production sequencing, milk-run and cross-docking by companies that intend to increase their flexibility, agility and reliability in order to support web-based businesses. It presents the results of a survey carried out with more than 600 manufacturing companies in the state of Sao Paulo, Brazil, and evaluates the changes that are taking place in operations, in order to make companies better suited to provide customized products, which are made to meet the individual requirements of each customer.

  6. CUSTOMIZATION IN THE MANUFACTURING INDUSTRY: SURVEY RESULTS IN SOUTHEASTERN BRAZIL

    Directory of Open Access Journals (Sweden)

    Alexandre Reis Graeml

    2010-01-01

    Full Text Available This paper discusses the advantage of using kanban, postponement, modularization, just-in-time, production sequencing, milk-run and cross-docking by companies that intend to increase their flexibility, agility and reliability in order to support web-based businesses. It presents the results of a survey carried out with more than 600 manufacturing companies in the state of Sao Paulo, Brazil, and evaluates the changes that are taking place in operations, in order to make companies better suited to provide customized products, which are made to meet the individual requirements of each customer.

  7. Cranioplasty prosthesis manufacturing based on reverse engineering technology

    Science.gov (United States)

    Chrzan, Robert; Urbanik, Andrzej; Karbowski, Krzysztof; Moskała, Marek; Polak, Jarosław; Pyrich, Marek

    2012-01-01

    Summary Background Most patients with large focal skull bone loss after craniectomy are referred for cranioplasty. Reverse engineering is a technology which creates a computer-aided design (CAD) model of a real structure. Rapid prototyping is a technology which produces physical objects from virtual CAD models. The aim of this study was to assess the clinical usefulness of these technologies in cranioplasty prosthesis manufacturing. Material/Methods CT was performed on 19 patients with focal skull bone loss after craniectomy, using a dedicated protocol. A material model of skull deficit was produced using computer numerical control (CNC) milling, and individually pre-operatively adjusted polypropylene-polyester prosthesis was prepared. In a control group of 20 patients a prosthesis was manually adjusted to each patient by a neurosurgeon during surgery, without using CT-based reverse engineering/rapid prototyping. In each case, the prosthesis was implanted into the patient. The mean operating times in both groups were compared. Results In the group of patients with reverse engineering/rapid prototyping-based cranioplasty, the mean operating time was shorter (120.3 min) compared to that in the control group (136.5 min). The neurosurgeons found the new technology particularly useful in more complicated bone deficits with different curvatures in various planes. Conclusions Reverse engineering and rapid prototyping may reduce the time needed for cranioplasty neurosurgery and improve the prosthesis fitting. Such technologies may utilize data obtained by commonly used spiral CT scanners. The manufacturing of individually adjusted prostheses should be commonly used in patients planned for cranioplasty with synthetic material. PMID:22207125

  8. The history of the peat manufacturing industry in The Netherlands : peat moss litter and active carbon

    NARCIS (Netherlands)

    Karel, Erwin; Gerding, Michiel; De Vries, Gerben

    This article describes the development of three major forms of peat processing by the manufacturing industry in The Netherlands since the last quarter of the 19th century. At a time when peat as a fuel was gradually being replaced by coal, the first form was the peat moss litter industry. Peat moss

  9. Local outcomes of globalization: manufacturing decline and labor response in the Philippine garment and shoe industries

    NARCIS (Netherlands)

    Beerepoot, N.

    2008-01-01

    In the past few decades, globalisation has led to major international shifts in labour intensive manufacturing generating ‘winners’ and ‘losers’ among countries, industries and workers. This paper uses case studies of the shoe industry in Marikina City and the garments sector in Metro Manila in

  10. Ethical, environmental and social issues for machine vision in manufacturing industry

    Science.gov (United States)

    Batchelor, Bruce G.; Whelan, Paul F.

    1995-10-01

    Some of the ethical, environmental and social issues relating to the design and use of machine vision systems in manufacturing industry are highlighted. The authors' aim is to emphasize some of the more important issues, and raise general awareness of the need to consider the potential advantages and hazards of machine vision technology. However, in a short article like this, it is impossible to cover the subject comprehensively. This paper should therefore be seen as a discussion document, which it is hoped will provoke more detailed consideration of these very important issues. It follows from an article presented at last year's workshop. Five major topics are discussed: (1) The impact of machine vision systems on the environment; (2) The implications of machine vision for product and factory safety, the health and well-being of employees; (3) The importance of intellectual integrity in a field requiring a careful balance of advanced ideas and technologies; (4) Commercial and managerial integrity; and (5) The impact of machine visions technology on employment prospects, particularly for people with low skill levels.

  11. The near-term impacts of carbon mitigation policies on manufacturing industries

    International Nuclear Information System (INIS)

    Morgenstern, Richard D.; Ho Mun; Shih, J.-S.; Zhang Xuehua

    2004-01-01

    Who pays for new policies to reduce carbon dioxide and other greenhouse gas emissions in the United States? This paper considers a slice of the question by examining the near-term impact on domestic manufacturing industries of both upstream (economy-wide) and downstream (electric power industry only) carbon mitigation policies. Detailed Census data on the electricity use of four-digit manufacturing industries are combined with input-output information on inter-industry purchases to paint a detailed picture of carbon use, including effects on final demand. Regional information on electricity supply and use by region is also incorporated. A relatively simple model is developed which yields estimates of the relative burdens within the manufacturing sector of alternative carbon policies. Overall, the principal conclusion is that within the manufacturing sector (which by definition excludes coal production and electricity generation), only a small number of industries would bear a disproportionate short-term burden of a carbon tax or similar policy. Not surprisingly, an electricity-only policy affects very different manufacturing industries than an economy-wide carbon tax

  12. Effects of environmental factors on corporate strategy and performance of manufacturing industries in Indonesia

    Directory of Open Access Journals (Sweden)

    Rachmad Hidayat

    2015-05-01

    Full Text Available Purpose: The purpose of this study was to examine and obtain empirical evidence of the effects of external and internal environmental factors on the strategy and performance of manufacturing companies. Design/methodology/approach: This study used primary data obtained by distributing questionnaires to 150 respondents of manufacturing companies in Indonesia spreading over six major cities in Java such as Jakarta, Banten, Bandung, Yogyakarta, Semarang and Surabaya. Samples were taken by using the systematic random sampling technique. The technique was used since those major cities had different numbers of manufacturing companies. Subsequently, the feasibility of the model was tested. Several indices of model feasibility would be used to test the model developed in this structural equation model. In case of a sub-optimal model, a model modification was to be performed by adding or removing paths so that the chi-square values would decrease by the values of the index. Findings and Originality/value: Results showed that internal and external environmental factors, through the operating environments and the remote environments of manufacturing industries, jointly affected the companies’ understanding of the condition of the industrial environments to establish strategic goals in order to achieve optimal performance of manufacturing industry. Practical implications: The internal and external environmental factors through the operating and remote environments had effects on the strategy of manufacturing companies in Indonesia. However, both internal and external environments did not affect the performance of manufacturing companies in Indonesia. There was a tendency that manufacturing companies were to observe the occurring macro-economic conditions. Manufacturing industries were faced with the pressures from competition, customers and suppliers that affected companies’ revenue. Performance of manufacturing industries was more influenced by macro

  13. Applications of aerospace technology in industry. A technology transfer profile: Food technology

    Science.gov (United States)

    Murray, D. M.

    1971-01-01

    Food processing and preservation technologies are reviewed, expected technological advances are considered including processing and market factors. NASA contributions to food technology and nutrition are presented with examples of transfer from NASA to industry.

  14. Radiation technology in emerging industrial applications. Proceedings

    International Nuclear Information System (INIS)

    2003-01-01

    In many industrial applications radiation processing has proven to be a technology of choice either because of its economic competitiveness or its technical superiority. Although the chemical effects of ionizing radiation have been known for more than a century, its industrial applications became possible only after the availability of reliable gamma sources and powerful electron accelerators during the last couple of decades.The programmes of the International Atomic Energy Agency (IAEA) in radiation processing are implemented through the Department of Nuclear Sciences and Applications and the Department of Technical Co-operation. The IAEA has been active in this field for many years, contributing to new developments, training, promotion and transfer of technology. In September 1997, the IAEA held an international symposium in Zakopane, Poland on the 'Use of radiation technology for the conservation of environment' where the status of current developments and of applications of radiation processing in the control of environmental pollution was reviewed (IAEA-TECDOC-1023, 1998). Recent developments and achievements in various aspects of radiation processing have been assessed continuously through the organization of consultants meetings, advisory group meetings and research co-ordination meetings. Worldwide growing interest in the use of radiation technology in various new industrial applications, as exemplified by the reports and presentations made at these meetings, has led the IAEA to organize a symposium to cover every aspect of radiation processing and, exclusively, the emerging industrial applications of radiation technology. The International Symposium on Radiation Technology in Emerging Industrial Applications was convened in November 2000 in Beijing, China. Its main purpose was to bring scientists,technologists, industrialists and regulatory authorities together with a view of exchanging information and reviewing the status of current developments and

  15. Radiation technology in emerging industrial applications. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-09-01

    In many industrial applications radiation processing has proven to be a technology of choice either because of its economic competitiveness or its technical superiority. Although the chemical effects of ionizing radiation have been known for more than a century, its industrial applications became possible only after the availability of reliable gamma sources and powerful electron accelerators during the last couple of decades.The programmes of the International Atomic Energy Agency (IAEA) in radiation processing are implemented through the Department of Nuclear Sciences and Applications and the Department of Technical Co-operation. The IAEA has been active in this field for many years, contributing to new developments, training, promotion and transfer of technology. In September 1997, the IAEA held an international symposium in Zakopane, Poland on the 'Use of radiation technology for the conservation of environment' where the status of current developments and of applications of radiation processing in the control of environmental pollution was reviewed (IAEA-TECDOC-1023, 1998). Recent developments and achievements in various aspects of radiation processing have been assessed continuously through the organization of consultants meetings, advisory group meetings and research co-ordination meetings. Worldwide growing interest in the use of radiation technology in various new industrial applications, as exemplified by the reports and presentations made at these meetings, has led the IAEA to organize a symposium to cover every aspect of radiation processing and, exclusively, the emerging industrial applications of radiation technology. The International Symposium on Radiation Technology in Emerging Industrial Applications was convened in November 2000 in Beijing, China. Its main purpose was to bring scientists,technologists, industrialists and regulatory authorities together with a view of exchanging information and reviewing the status of current developments and

  16. Estimates of emergency operating capacity in US manufacturing and nonmanufacturing industries

    Energy Technology Data Exchange (ETDEWEB)

    Belzer, D.B. (Pacific Northwest Lab., Richland, WA (USA)); Serot, D.E. (D/E/S Research, Richland, WA (USA)); Kellogg, M.A. (ERCE, Inc., Portland, OR (USA))

    1991-03-01

    Development of integrated mobilization preparedness policies requires planning estimates of available productive capacity during national emergency conditions. Such estimates must be developed in a manner that allows evaluation of current trends in capacity and the consideration of uncertainties in various data inputs and in engineering assumptions. This study, conducted by Pacific Northwest Laboratory (PNL), developed estimates of emergency operating capacity (EOC) for 446 manufacturing industries at the 4-digit Standard Industrial Classification (SIC) level of aggregation and for 24 key non-manufacturing sectors. This volume presents tabular and graphical results of the historical analysis and projections for each SIC industry. (JF)

  17. Activities of Japan Nuclear Technology Institute Japanese TSO of Industry

    International Nuclear Information System (INIS)

    Nagata, T.

    2010-01-01

    Nuclear energy is a superior form of energy in that it delivers stable power supplies and counters global warming, and it is important to promote nuclear power generation as the core power sources for a nation. However, the Japanese environment surrounding nuclear energy is changing drastically, following the liberalization of market and recent series of troubles or falsifications shaking public confidence in nuclear energy. In the above mentioned situation, nuclear industries and organizations must fulfill their individual roles, and amass its strength to work toward enhancing industry initiatives for safety activities, securing safe / stable plant operations, restoring public confidence and initiate revitalization of nuclear energy operations. The Japan Nuclear Technology Institute (JANTI) has been established as a new entity for supporting and leading the industry's further progress in March 2005. Members of JANTI are not only utilities but also component manufacturers and constructors. JANTI enhance the technological foundation of nuclear energy based on scientific and rational data, coordinates its use among a wide range of relevant organizations, and helps members enhance their voluntary safety activities. At the same time, it is independent of utilities, and exercises a function of checking industry at the objective, third-party standpoint. As for the activities of JANTI itself, information disclosure and the establishment of a council comprising external members will enhance administration transparency. (author)

  18. The manufacturing of components for the nuclear industry

    International Nuclear Information System (INIS)

    Fogarty, John

    The experience of one company in the Canadian nuclear industry, a prime supplier of end fittings for CANDU type reactors, is described. Many factors such as work flow and continuity, financing, quality control, and export trade, are dealt with. (E.C.B.)

  19. National Security and the Industrial Policy Debate: Modernizing Defense Manufacturing

    Science.gov (United States)

    1991-05-01

    47. 49. Michael Schroeder and Walecia Konrad, " Nucor : Rolling Right Into Steel’s Big Time," Business Week 19 Nov. 1990: 76. 50. Clyde V. Prestowitz...Defense." The I Industrial Policy Debate. Ed. Chalmers Johnson. San Francisco: ICS Press, 1984. i 74I Schroeder, Michael and Walecia Konrad. " Nucor

  20. International Harmonization of Training and Qualification in the Manufacturing Industry

    Science.gov (United States)

    Quintino, L.; Fernandes, I.; Miranda, R. M.

    2011-01-01

    Purpose: The aim of this paper is to propose a model for international harmonization of the training and qualification of human resources for industrial professions. The outcome is a system based on training guidelines and a quality assurance methodology that is now in use in 42 countries around the world. Design/methodology/approach: The paper…